diff --git a/src/mainboard/asrock/g41c-gs/romstage.c b/src/mainboard/asrock/g41c-gs/romstage.c
index b054897..06e13eb 100644
--- a/src/mainboard/asrock/g41c-gs/romstage.c
+++ b/src/mainboard/asrock/g41c-gs/romstage.c
@@ -16,11 +16,7 @@
  */
 
 #include <device/pnp_ops.h>
-#include <device/pci_ops.h>
-#include <console/console.h>
-#include <arch/romstage.h>
 #include <northbridge/intel/x4x/x4x.h>
-#include <southbridge/intel/common/pmclib.h>
 #include <southbridge/intel/i82801gx/i82801gx.h>
 #include <superio/nuvoton/common/nuvoton.h>
 #include <superio/nuvoton/nct6776/nct6776.h>
@@ -30,9 +26,8 @@
 #define SERIAL_DEV_R2 PNP_DEV(0x2e, NCT6776_SP1)
 #define SERIAL_DEV_R1 PNP_DEV(0x2e, W83627DHG_SP1)
 #define SUPERIO_DEV PNP_DEV(0x2e, 0)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
 
-static void mb_lpc_setup(void)
+void mb_lpc_setup(void)
 {
 	/* Set GPIOs on superio, enable UART */
 	if (CONFIG(SUPERIO_NUVOTON_NCT6776)) {
@@ -53,34 +48,8 @@
 	RCBA16(D29IR) = 0x0237;
 }
 
-void mainboard_romstage_entry(void)
+void mb_get_spd_map(u8 spd_map[4])
 {
-	//                          ch0      ch1
-	const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
-	u8 boot_path = 0;
-	u8 s3_resume;
-
-	/* Set southbridge and Super I/O GPIOs. */
-	i82801gx_lpc_setup();
-	mb_lpc_setup();
-
-	console_init();
-
-	enable_smbus();
-
-	i82801gx_early_init();
-	x4x_early_init();
-
-	s3_resume = southbridge_detect_s3_resume();
-	if (s3_resume)
-		boot_path = BOOT_PATH_RESUME;
-	if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
-		boot_path = BOOT_PATH_WARM_RESET;
-
-	sdram_initialize(boot_path, spd_addrmap);
-
-	x4x_late_init(s3_resume);
-
-	printk(BIOS_DEBUG, "x4x late init complete\n");
-
+	spd_map[0] = 0x50;
+	spd_map[2] = 0x52;
 }
diff --git a/src/mainboard/asus/p5qc/romstage.c b/src/mainboard/asus/p5qc/romstage.c
index 9a90f74..53aa176 100644
--- a/src/mainboard/asus/p5qc/romstage.c
+++ b/src/mainboard/asus/p5qc/romstage.c
@@ -14,57 +14,27 @@
  * GNU General Public License for more details.
  */
 
-#include <device/pci_ops.h>
-#include <console/console.h>
 #include <southbridge/intel/i82801jx/i82801jx.h>
-#include <southbridge/intel/common/pmclib.h>
 #include <northbridge/intel/x4x/x4x.h>
-#include <arch/romstage.h>
 #include <superio/winbond/w83667hg-a/w83667hg-a.h>
 #include <superio/winbond/common/winbond.h>
 
 #define SERIAL_DEV PNP_DEV(0x2e, W83667HG_A_SP1)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
 
-/* Early mainboard specific GPIO setup.
- * We should use standard gpio.h eventually
- */
-
-static void mb_misc_rcba(void)
+void mb_lpc_setup(void)
 {
 	/* TODO? */
 	RCBA32(RCBA_CG) = 0xbf7f001f;
 	RCBA32(0x3430) = 0x00000002;
 	RCBA32(0x3f00) = 0x00000038;
+
+	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 }
 
-void mainboard_romstage_entry(void)
+void mb_get_spd_map(u8 spd_map[4])
 {
-	const u8 spd_addrmap[4] = { 0x50, 0x51, 0x52, 0x53 };
-	u8 boot_path = 0;
-	u8 s3_resume;
-
-	/* Set southbridge and Super I/O GPIOs. */
-	i82801jx_lpc_setup();
-	mb_misc_rcba();
-	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
-	console_init();
-
-	enable_smbus();
-
-	i82801jx_early_init();
-	x4x_early_init();
-
-	s3_resume = southbridge_detect_s3_resume();
-	if (s3_resume)
-		boot_path = BOOT_PATH_RESUME;
-	if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
-		boot_path = BOOT_PATH_WARM_RESET;
-
-	sdram_initialize(boot_path, spd_addrmap);
-
-	x4x_late_init(s3_resume);
-
-	printk(BIOS_DEBUG, "x4x late init complete\n");
+	spd_map[0] = 0x50;
+	spd_map[1] = 0x51;
+	spd_map[2] = 0x52;
+	spd_map[3] = 0x53;
 }
diff --git a/src/mainboard/asus/p5ql-em/romstage.c b/src/mainboard/asus/p5ql-em/romstage.c
index c7ade1c..fa22a64 100644
--- a/src/mainboard/asus/p5ql-em/romstage.c
+++ b/src/mainboard/asus/p5ql-em/romstage.c
@@ -12,22 +12,22 @@
  * GNU General Public License for more details.
  */
 
-#include <device/pci_ops.h>
 #include <device/pnp_ops.h>
 #include <console/console.h>
-#include <southbridge/intel/i82801jx/i82801jx.h>
-#include <southbridge/intel/common/pmclib.h>
 #include <northbridge/intel/x4x/x4x.h>
 #include <cpu/x86/msr.h>
 #include <cpu/intel/speedstep.h>
-#include <arch/romstage.h>
 #include <cf9_reset.h>
 #include <superio/winbond/w83627dhg/w83627dhg.h>
 #include <superio/winbond/common/winbond.h>
 
 #define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
 #define GPIO_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345_V)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
+
+void mb_lpc_setup(void)
+{
+	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+}
 
 static u8 msr_get_fsb(void)
 {
@@ -103,41 +103,20 @@
 	return need_reset;
 }
 
-void mainboard_romstage_entry(void)
+void mb_pre_raminit_setup(int s3_resume)
 {
-	/* This board has first dimm slot of each channel hooked up to
-	   rank0 and rank1, while the second dimm slot is only connected
-	   to rank1. The raminit does not support such setups
-	   const u8 spd_addrmap[4] = { 0x50, 0x51, 0x52, 0x53 }; */
-	const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
-	u8 boot_path = 0;
-	u8 s3_resume;
-
-	/* Set southbridge and Super I/O GPIOs. */
-	i82801jx_lpc_setup();
-	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
-	console_init();
-
-	enable_smbus();
-
-	i82801jx_early_init();
-	x4x_early_init();
-
-	s3_resume = southbridge_detect_s3_resume();
-	if (s3_resume)
-		boot_path = BOOT_PATH_RESUME;
-	if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
-		boot_path = BOOT_PATH_WARM_RESET;
-
 	if (!s3_resume && setup_sio_gpio()) {
 		printk(BIOS_DEBUG, "Needs reset to configure CPU BSEL straps\n");
 		full_reset();
 	}
+}
 
-	sdram_initialize(boot_path, spd_addrmap);
-
-	x4x_late_init(s3_resume);
-
-	printk(BIOS_DEBUG, "x4x late init complete\n");
+void mb_get_spd_map(u8 spd_map[4])
+{
+	/* This board has first dimm slot of each channel hooked up to
+	   rank0 and rank1, while the second dimm slot is only connected
+	   to rank1. The raminit does not support such setups. So only the
+	   first dimms of each channel are used. */
+	spd_map[0] = 0x50;
+	spd_map[2] = 0x52;
 }
diff --git a/src/mainboard/asus/p5qpl-am/romstage.c b/src/mainboard/asus/p5qpl-am/romstage.c
index de3972d..ad16c0f 100644
--- a/src/mainboard/asus/p5qpl-am/romstage.c
+++ b/src/mainboard/asus/p5qpl-am/romstage.c
@@ -17,20 +17,20 @@
 
 #include <cf9_reset.h>
 #include <device/pnp_ops.h>
-#include <device/pci_ops.h>
 #include <console/console.h>
-#include <arch/romstage.h>
 #include <cpu/intel/speedstep.h>
 #include <cpu/x86/msr.h>
 #include <northbridge/intel/x4x/x4x.h>
-#include <southbridge/intel/common/pmclib.h>
-#include <southbridge/intel/i82801gx/i82801gx.h>
 #include <superio/winbond/common/winbond.h>
 #include <superio/winbond/w83627dhg/w83627dhg.h>
 
 #define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
 #define GPIO_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345_V)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
+
+void mb_lpc_setup(void)
+{
+	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+}
 
 static u8 msr_get_fsb(void)
 {
@@ -127,40 +127,16 @@
 	return need_reset;
 }
 
-void mainboard_romstage_entry(void)
+void mb_pre_raminit_setup(int s3_resume)
 {
-	//                          ch0      ch1
-	const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
-	u8 boot_path = 0;
-	u8 s3_resume;
-
-	/* Set southbridge and Super I/O GPIOs. */
-	i82801gx_lpc_setup();
-	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
-	console_init();
-
-	enable_smbus();
-
-	i82801gx_early_init();
-	x4x_early_init();
-
-	s3_resume = southbridge_detect_s3_resume();
-	if (s3_resume)
-		boot_path = BOOT_PATH_RESUME;
-	if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
-		boot_path = BOOT_PATH_WARM_RESET;
-
 	if (!s3_resume && setup_sio_gpio()) {
-		printk(BIOS_DEBUG,
-		       "Needs reset to configure CPU BSEL straps\n");
+		printk(BIOS_DEBUG, "Needs reset to configure CPU BSEL straps\n");
 		full_reset();
 	}
+}
 
-	sdram_initialize(boot_path, spd_addrmap);
-
-	x4x_late_init(s3_resume);
-
-	printk(BIOS_DEBUG, "x4x late init complete\n");
-
+void mb_get_spd_map(u8 spd_map[4])
+{
+	spd_map[0] = 0x50;
+	spd_map[2] = 0x52;
 }
diff --git a/src/mainboard/foxconn/g41s-k/romstage.c b/src/mainboard/foxconn/g41s-k/romstage.c
index 45ff7e4..b4bd77d 100644
--- a/src/mainboard/foxconn/g41s-k/romstage.c
+++ b/src/mainboard/foxconn/g41s-k/romstage.c
@@ -16,20 +16,15 @@
  * GNU General Public License for more details.
  */
 
-#include <console/console.h>
-#include <arch/romstage.h>
-#include <device/pci_ops.h>
 #include <northbridge/intel/x4x/x4x.h>
-#include <southbridge/intel/common/pmclib.h>
 #include <southbridge/intel/i82801gx/i82801gx.h>
 #include <superio/ite/common/ite.h>
 #include <superio/ite/it8720f/it8720f.h>
 
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
 #define SERIAL_DEV PNP_DEV(0x2e, IT8720F_SP1)
 #define GPIO_DEV PNP_DEV(0x2e, IT8720F_GPIO)
 
-static void mb_lpc_setup(void)
+void mb_lpc_setup(void)
 {
 	/* Set up GPIOs on Super I/O. */
 	ite_reg_write(GPIO_DEV, 0x25, 0x01);
@@ -55,43 +50,13 @@
 	RCBA16(D29IR) = 0x0237;
 
 	RCBA32(FD) |= FD_INTLAN;
+
+	ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 }
 
-void mainboard_romstage_entry(void)
+void mb_get_spd_map(u8 spd_map[4])
 {
-	//                          ch0      ch1
-#if CONFIG(BOARD_FOXCONN_G41S_K)
-	const u8 spd_addrmap[4] = { 0x50, 0, 0, 0 };
-#else
-	/* TODO adapt raminit such that other slots can be used
-	 * for single rank dimms */
-	const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
-#endif
-	u8 boot_path = 0;
-	u8 s3_resume;
-
-	/* Set up southbridge and Super I/O GPIOs. */
-	i82801gx_lpc_setup();
-	mb_lpc_setup();
-	ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
-	console_init();
-
-	enable_smbus();
-
-	i82801gx_early_init();
-	x4x_early_init();
-
-	s3_resume = southbridge_detect_s3_resume();
-	if (s3_resume)
-		boot_path = BOOT_PATH_RESUME;
-	if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
-		boot_path = BOOT_PATH_WARM_RESET;
-
-	sdram_initialize(boot_path, spd_addrmap);
-
-	x4x_late_init(s3_resume);
-
-	printk(BIOS_DEBUG, "x4x late init complete\n");
-
+	spd_map[0] = 0x50;
+	if (CONFIG(BOARD_FOXCONN_G41M))
+		spd_map[2] = 0x52;
 }
diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/romstage.c b/src/mainboard/gigabyte/ga-g41m-es2l/romstage.c
index 16b157b..bde4f33 100644
--- a/src/mainboard/gigabyte/ga-g41m-es2l/romstage.c
+++ b/src/mainboard/gigabyte/ga-g41m-es2l/romstage.c
@@ -14,14 +14,9 @@
  * GNU General Public License for more details.
  */
 
-#include <stdint.h>
-#include <device/pci_def.h>
 #include <device/pci_ops.h>
-#include <console/console.h>
 #include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/pmclib.h>
 #include <northbridge/intel/x4x/x4x.h>
-#include <arch/romstage.h>
 #include <superio/ite/it8718f/it8718f.h>
 #include <superio/ite/common/ite.h>
 
@@ -34,7 +29,7 @@
  * We should use standard gpio.h eventually
  */
 
-static void mb_lpc_init(void)
+void mb_lpc_setup(void)
 {
 	pci_devfn_t dev;
 
@@ -73,6 +68,11 @@
 	ite_reg_write(EC_DEV, 0x70, 0x00); // Don't use IRQ9
 	ite_reg_write(EC_DEV, 0x30, 0x01); // Enable
 
+	ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+
+	/* Disable SIO reboot */
+	ite_reg_write(GPIO_DEV, 0xEF, 0x7E);
+
 	/* IRQ routing */
 	RCBA32(D31IP) = 0x00002210;
 	RCBA32(D30IP) = 0x00002100;
@@ -84,38 +84,8 @@
 	RCBA32(D27IR) = 0x00000000;
 }
 
-void mainboard_romstage_entry(void)
+void mb_get_spd_map(u8 spd_map[4])
 {
-	//                          ch0      ch1
-	const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
-	u8 boot_path = 0;
-	u8 s3_resume;
-
-	/* Set southbridge and Super I/O GPIOs. */
-	i82801gx_lpc_setup();
-	mb_lpc_init();
-	ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
-	/* Disable SIO reboot */
-	ite_reg_write(GPIO_DEV, 0xEF, 0x7E);
-
-	console_init();
-
-	enable_smbus();
-
-	i82801gx_early_init();
-	x4x_early_init();
-
-	s3_resume = southbridge_detect_s3_resume();
-	if (s3_resume)
-		boot_path = BOOT_PATH_RESUME;
-	if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
-		boot_path = BOOT_PATH_WARM_RESET;
-
-	sdram_initialize(boot_path, spd_addrmap);
-
-	x4x_late_init(s3_resume);
-
-	printk(BIOS_DEBUG, "x4x late init complete\n");
-
+	spd_map[0] = 0x50;
+	spd_map[2] = 0x52;
 }
diff --git a/src/mainboard/intel/dg41wv/romstage.c b/src/mainboard/intel/dg41wv/romstage.c
index 0d7c162..ff018af 100644
--- a/src/mainboard/intel/dg41wv/romstage.c
+++ b/src/mainboard/intel/dg41wv/romstage.c
@@ -16,19 +16,14 @@
  */
 
 #include <device/pnp_ops.h>
-#include <device/pci_ops.h>
-#include <console/console.h>
-#include <arch/romstage.h>
 #include <northbridge/intel/x4x/x4x.h>
-#include <southbridge/intel/common/pmclib.h>
 #include <southbridge/intel/i82801gx/i82801gx.h>
 #include <superio/winbond/common/winbond.h>
 #include <superio/winbond/w83627dhg/w83627dhg.h>
 
 #define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
 
-static void mb_lpc_setup(void)
+void mb_lpc_setup(void)
 {
 	/* Set GPIOs on superio, enable UART */
 	pnp_enter_ext_func_mode(SERIAL_DEV);
@@ -38,40 +33,15 @@
 
 	pnp_exit_ext_func_mode(SERIAL_DEV);
 
+	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+
 	/* IRQ routing */
 	RCBA16(D31IR) = 0x0132;
 	RCBA16(D29IR) = 0x0237;
 }
 
-void mainboard_romstage_entry(void)
+void mb_get_spd_map(u8 spd_map[4])
 {
-	//                          ch0      ch1
-	const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
-	u8 boot_path = 0;
-	u8 s3_resume;
-
-	/* Set southbridge and Super I/O GPIOs. */
-	i82801gx_lpc_setup();
-	mb_lpc_setup();
-	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
-	console_init();
-
-	enable_smbus();
-
-	i82801gx_early_init();
-	x4x_early_init();
-
-	s3_resume = southbridge_detect_s3_resume();
-	if (s3_resume)
-		boot_path = BOOT_PATH_RESUME;
-	if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
-		boot_path = BOOT_PATH_WARM_RESET;
-
-	sdram_initialize(boot_path, spd_addrmap);
-
-	x4x_late_init(s3_resume);
-
-	printk(BIOS_DEBUG, "x4x late init complete\n");
-
+	spd_map[0] = 0x50;
+	spd_map[2] = 0x52;
 }
diff --git a/src/mainboard/intel/dg43gt/romstage.c b/src/mainboard/intel/dg43gt/romstage.c
index b851f98..71fd87a 100644
--- a/src/mainboard/intel/dg43gt/romstage.c
+++ b/src/mainboard/intel/dg43gt/romstage.c
@@ -14,23 +14,14 @@
  * GNU General Public License for more details.
  */
 
-#include <device/pci_ops.h>
-#include <console/console.h>
 #include <southbridge/intel/i82801jx/i82801jx.h>
-#include <southbridge/intel/common/pmclib.h>
 #include <northbridge/intel/x4x/x4x.h>
-#include <arch/romstage.h>
 #include <superio/winbond/w83627dhg/w83627dhg.h>
 #include <superio/winbond/common/winbond.h>
 
 #define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
 
-/* Early mainboard specific GPIO setup.
- * We should use standard gpio.h eventually
- */
-
-static void mb_misc_rcba(void)
+void mb_lpc_setup(void)
 {
 	RCBA32(0x3410) = 0x00060464;
 	RCBA32(RCBA_BUC) &= ~BUC_LAND;
@@ -38,35 +29,14 @@
 	RCBA32(0x341c) = 0xbf7f001f;
 	RCBA32(0x3430) = 0x00000002;
 	RCBA32(0x3f00) = 0x0000000b;
+
+	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 }
 
-void mainboard_romstage_entry(void)
+void mb_get_spd_map(u8 spd_map[4])
 {
-	const u8 spd_addrmap[4] = { 0x50, 0x51, 0x52, 0x53 };
-	u8 boot_path = 0;
-	u8 s3_resume;
-
-	/* Set southbridge and Super I/O GPIOs. */
-	i82801jx_lpc_setup();
-	mb_misc_rcba();
-	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
-	console_init();
-
-	enable_smbus();
-
-	i82801jx_early_init();
-	x4x_early_init();
-
-	s3_resume = southbridge_detect_s3_resume();
-	if (s3_resume)
-		boot_path = BOOT_PATH_RESUME;
-	if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
-		boot_path = BOOT_PATH_WARM_RESET;
-
-	sdram_initialize(boot_path, spd_addrmap);
-
-	x4x_late_init(s3_resume);
-
-	printk(BIOS_DEBUG, "x4x late init complete\n");
+	spd_map[0] = 0x50;
+	spd_map[1] = 0x51;
+	spd_map[2] = 0x52;
+	spd_map[3] = 0x53;
 }
diff --git a/src/mainboard/lenovo/thinkcentre_a58/romstage.c b/src/mainboard/lenovo/thinkcentre_a58/romstage.c
index 8be2c86..5594cbd 100644
--- a/src/mainboard/lenovo/thinkcentre_a58/romstage.c
+++ b/src/mainboard/lenovo/thinkcentre_a58/romstage.c
@@ -15,45 +15,18 @@
  * GNU General Public License for more details.
  */
 
-#include <console/console.h>
-#include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/pmclib.h>
 #include <northbridge/intel/x4x/x4x.h>
-#include <arch/romstage.h>
-#include <device/pci_ops.h>
 #include <superio/smsc/smscsuperio/smscsuperio.h>
 
 #define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
 
-void mainboard_romstage_entry(void)
+void mb_lpc_setup(void)
 {
-	//                          ch0      ch1
-	const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
-	u8 boot_path = 0;
-	u8 s3_resume;
-
-	/* Set southbridge and Super I/O GPIOs. */
-	i82801gx_lpc_setup();
 	smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+}
 
-	console_init();
-
-	enable_smbus();
-
-	i82801gx_early_init();
-	x4x_early_init();
-
-	s3_resume = southbridge_detect_s3_resume();
-	if (s3_resume)
-		boot_path = BOOT_PATH_RESUME;
-	if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
-		boot_path = BOOT_PATH_WARM_RESET;
-
-	sdram_initialize(boot_path, spd_addrmap);
-
-	x4x_late_init(s3_resume);
-
-	printk(BIOS_DEBUG, "x4x late init complete\n");
-
+void mb_get_spd_map(u8 spd_map[4])
+{
+	spd_map[0] = 0x50;
+	spd_map[2] = 0x52;
 }
diff --git a/src/northbridge/intel/x4x/Makefile.inc b/src/northbridge/intel/x4x/Makefile.inc
index b7fd2fe..79a03cb 100644
--- a/src/northbridge/intel/x4x/Makefile.inc
+++ b/src/northbridge/intel/x4x/Makefile.inc
@@ -23,6 +23,7 @@
 romstage-y += rcven.c
 romstage-y += raminit_tables.c
 romstage-y += dq_dqs.c
+romstage-y += romstage.c
 
 ramstage-y += acpi.c
 ramstage-y += memmap.c
diff --git a/src/northbridge/intel/x4x/romstage.c b/src/northbridge/intel/x4x/romstage.c
new file mode 100644
index 0000000..c3a5036
--- /dev/null
+++ b/src/northbridge/intel/x4x/romstage.c
@@ -0,0 +1,71 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/pci_ops.h>
+#include <console/console.h>
+#include <southbridge/intel/common/pmclib.h>
+#include <northbridge/intel/x4x/x4x.h>
+#include <arch/romstage.h>
+
+#if CONFIG(SOUTHBRIDGE_INTEL_I82801JX)
+#include <southbridge/intel/i82801jx/i82801jx.h>
+#elif CONFIG(SOUTHBRIDGE_INTEL_I82801GX)
+#include <southbridge/intel/i82801gx/i82801gx.h>
+#endif
+
+__weak void mb_pre_raminit_setup(int s3_resume)
+{
+}
+
+void mainboard_romstage_entry(void)
+{
+	u8 spd_addr_map[4] = {};
+	u8 boot_path = 0;
+	u8 s3_resume;
+
+#if CONFIG(SOUTHBRIDGE_INTEL_I82801JX)
+	i82801jx_lpc_setup();
+#elif CONFIG(SOUTHBRIDGE_INTEL_I82801GX)
+	i82801gx_lpc_setup();
+#endif
+
+	mb_lpc_setup();
+
+	console_init();
+
+	enable_smbus();
+
+#if CONFIG(SOUTHBRIDGE_INTEL_I82801JX)
+	i82801jx_early_init();
+#elif CONFIG(SOUTHBRIDGE_INTEL_I82801GX)
+	i82801gx_early_init();
+#endif
+
+	x4x_early_init();
+
+	s3_resume = southbridge_detect_s3_resume();
+	mb_pre_raminit_setup(s3_resume);
+
+	if (s3_resume)
+		boot_path = BOOT_PATH_RESUME;
+	if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
+		boot_path = BOOT_PATH_WARM_RESET;
+
+	mb_get_spd_map(spd_addr_map);
+	sdram_initialize(boot_path, spd_addr_map);
+
+	x4x_late_init(s3_resume);
+
+	printk(BIOS_DEBUG, "x4x late init complete\n");
+}
diff --git a/src/northbridge/intel/x4x/x4x.h b/src/northbridge/intel/x4x/x4x.h
index 76e82d9..e4a6c21 100644
--- a/src/northbridge/intel/x4x/x4x.h
+++ b/src/northbridge/intel/x4x/x4x.h
@@ -373,6 +373,9 @@
 
 void x4x_early_init(void);
 void x4x_late_init(int s3resume);
+void mb_lpc_setup(void);
+void mb_get_spd_map(u8 spd_map[4]);
+void mb_pre_raminit_setup(int s3_resume);
 u32 decode_igd_memory_size(u32 gms);
 u32 decode_igd_gtt_size(u32 gsm);
 u32 decode_tseg_size(const u32 esmramc);