chip soc/intel/meteorlake

	# GPE configuration
	register "pmc_gpe0_dw0" = "GPP_D"
	register "pmc_gpe0_dw1" = "GPP_E"
	register "pmc_gpe0_dw2" = "GPP_F"

	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
	register "gen1_dec" = "0x00fc0801"
	register "gen2_dec" = "0x000c0201"
	# EC memory map range is 0x900-0x9ff
	register "gen3_dec" = "0x00fc0901"

	register "usb2_ports[0]" = "USB2_PORT_EMPTY"	# Disable USB2.0 Port 0
	register "usb2_ports[1]" = "USB2_PORT_EMPTY"	# Disable USB2.0 Port 1
	register "usb2_ports[2]" = "USB2_PORT_EMPTY"	# Disable USB2.0 Port 2
	register "usb2_ports[3]" = "USB2_PORT_EMPTY"	# Disable USB2.0 Port 3
	register "usb2_ports[4]" = "USB2_PORT_EMPTY"	# Disable USB2.0 Port 4
	register "usb2_ports[5]" = "USB2_PORT_EMPTY"	# Disable USB2.0 Port 5
	register "usb2_ports[6]" = "USB2_PORT_EMPTY"	# Disable USB2.0 Port 6
	register "usb2_ports[7]" = "USB2_PORT_EMPTY"	# Disable USB2.0 Port 7
	register "usb2_ports[8]" = "USB2_PORT_EMPTY"	# Disable USB2.0 Port 8
	register "usb2_ports[9]" = "USB2_PORT_EMPTY"	# Disable USB2.0 Port 9

	register "usb3_ports[0]" = "USB3_PORT_EMPTY"	# Disable USB3.0 Port 0
	register "usb3_ports[1]" = "USB3_PORT_EMPTY"	# Disable USB3.0 Port 1

	register "tcss_ports[0]" = "TCSS_PORT_EMPTY"	# Disable USB-C Port 0
	register "tcss_ports[1]" = "TCSS_PORT_EMPTY"	# Disable USB-C Port 1
	register "tcss_ports[2]" = "TCSS_PORT_EMPTY"	# Disable USB-C Port 2
	register "tcss_ports[3]" = "TCSS_PORT_EMPTY"	# Disable USB-C Port 3

	# S0ix enable
	register "s0ix_enable" = "1"

	# Disable C1 C-state auto-demotion
	register "disable_c1_state_auto_demotion" = "1"

	# Enable Energy Reporting
	register "pch_pm_energy_report_enable" = "1"

	# DPTF enable
	register "dptf_enable" = "1"

	# Temporary setting TCC of 100C = Tj max (110) - TCC_Offset (10)
	register "tcc_offset" = "10"

	# Enable CNVi BT
	register "cnvi_bt_core" = "true"

	register "sagv" = "SAGV_ENABLED"

	register "sagv_freq_mhz" = "{
		[0] = 3200,
		[1] = 6000,
		[2] = 6400,
		[3] = 5600,
	}"

	register "sagv_gear" = "{
		[0] = 4,
		[1] = 4,
		[2] = 4,
		[3] = 2,
	}"

	# Set on-board graphics as primary display
	register "skip_ext_gfx_scan" = "1"

	register "serial_io_uart_mode" = "{
		[PchSerialIoIndexUART0] = PchSerialIoPci,
		[PchSerialIoIndexUART1] = PchSerialIoDisabled,
		[PchSerialIoIndexUART2] = PchSerialIoDisabled,
	}"

	register "pch_hda_dsp_enable" = "1"
	register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T"
	register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ"
	register "pch_hda_idisp_codec_enable" = "1"

	device domain 0 on
		device ref igpu on end
		device ref dtt on end
		device ref ioe_shared_sram on end
		device ref xhci on end
		device ref pmc_shared_sram on end
		device ref heci1 on end
		device ref uart0 on end
		device ref soc_espi on
			chip ec/google/chromeec
				device pnp 0c09.0 on end
			end
		end
	end
end