This patch adds support for the Intel D810E2CB (i810e/ICH2) desktop board. Hurray, this is the first i810 board running CAR.
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5637 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/mainboard/intel/d810e2cb/romstage.c b/src/mainboard/intel/d810e2cb/romstage.c
new file mode 100644
index 0000000..1cfe505
--- /dev/null
+++ b/src/mainboard/intel/d810e2cb/romstage.c
@@ -0,0 +1,67 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Joseph Smith <joe@settoplinux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <arch/hlt.h>
+#include <console/console.h>
+#include "lib/ramtest.c"
+#include "southbridge/intel/i82801bx/i82801bx.h"
+#include "southbridge/intel/i82801bx/i82801bx_early_smbus.c"
+#include "northbridge/intel/i82810/raminit.h"
+#include "lib/debug.c"
+#include "pc80/udelay_io.c"
+#include "lib/delay.c"
+#include "cpu/x86/bist.h"
+#include "superio/smsc/smscsuperio/smscsuperio_early_serial.c"
+#include "gpio.c"
+
+#define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1)
+
+static inline int spd_read_byte(unsigned int device, unsigned int address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#include "northbridge/intel/i82810/raminit.c"
+/* #include "northbridge/intel/i82810/debug.c" */
+
+void main(unsigned long bist)
+{
+ /* Set southbridge and superio gpios */
+ mb_gpio_init();
+
+ smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ uart_init();
+ console_init();
+
+ report_bist_failure(bist);
+ enable_smbus();
+ /* dump_spd_registers(); */
+ sdram_set_registers();
+ sdram_set_spd_registers();
+ sdram_enable();
+ /* ram_check(0, 640 * 1024); */
+}
+