# SPDX-License-Identifier: GPL-2.0-or-later

chip northbridge/intel/sandybridge
	device domain 0 on
		chip southbridge/intel/bd82x6x	# Intel Series 6 Cougar Point PCH
			register "gen1_dec" = "0x000c0291"
			register "gen2_dec" = "0x000c0a01"
			register "pcie_port_coalesce" = "true"
			register "sata_interface_speed_support" = "0x3"
			register "sata_port_map" = "0x33"
			register "spi.opprefixes" = "{ 0x50, 0x06 }"
			register "spi.ops" = "{{0x01, WRITE_NO_ADDR},
						{0x02, WRITE_WITH_ADDR},
						{0x03, READ_WITH_ADDR},
						{0x05, READ_NO_ADDR},
						{0x20, WRITE_WITH_ADDR},
						{0x9f, READ_NO_ADDR},
						{0xad, WRITE_NO_ADDR},
						{0x04, WRITE_NO_ADDR}}"
			device ref mei1 on	# Management Engine Interface 1
				subsystemid 0x174b 0x1007
			end
			device ref mei2 off end	# Management Engine Interface 2
			device ref me_ide_r off end	# Management Engine IDE-R
			device ref me_kt off end	# Management Engine KT
			device ref gbe off end	# Intel Gigabit Ethernet
			device ref ehci2 on	# USB2 EHCI #2
				subsystemid 0x174b 0x1007
			end
			device ref hda on	# HD Audio Controller
				subsystemid 0x8086 0x1c20
			end
			device ref pcie_rp1 on	# PCIe Port #1
				subsystemid 0x174b 0x1007
			end
			device ref pcie_rp2 off end	# PCIe Port #2
			device ref pcie_rp3 off end	# PCIe Port #3
			device ref pcie_rp4 off end	# PCIe Port #4
			device ref pcie_rp5 on	# PCIe Port #5
				subsystemid 0x174b 0x1007
			end
			device ref pcie_rp6 on	# PCIe Port #6
				subsystemid 0x174b 0x1007
			end
			device ref pcie_rp7 off end	# PCIe Port #7
			device ref pcie_rp8 off end	# PCIe Port #8
			device ref ehci1 on	# USB2 EHCI #1
				subsystemid 0x174b 0x1007
			end
			device ref pci_bridge off end	# PCI bridge
			device ref lpc on	# LPC bridge
				subsystemid 0x174b 0x1007
				chip superio/fintek/f71808a
					register "multi_function_register_0" = "0x00"
					register "multi_function_register_1" = "0xc4"
					register "multi_function_register_2" = "0x21"
					register "multi_function_register_3" = "0x2f"
					register "multi_function_register_4" = "0x5c"
					register "hwm_peci_tsi_ctrl" = "0x02"	# PECI enabled, 1.23 V
					register "hwm_tcc_temp" = "0x66"	# TCC temperature = 102 °C
					register "hwm_fan1_seg1_speed" = "0xff"	# Fan 1 segment 1 = 100%
					register "hwm_fan1_seg2_speed" = "0xdb"	# Fan 1 segment 2 = 86%
					register "hwm_fan1_seg3_speed" = "0xbc"	# Fan 1 segment 3 = 74%
					register "hwm_fan1_seg4_speed" = "0x9e"	# Fan 1 segment 4 = 62%
					register "hwm_fan1_seg5_speed" = "0x7f"	# Fan 1 segment 5 = 50%
					register "hwm_fan1_temp_src" = "0x18"	# Fan 1 source = PECI
					register "hwm_fan2_seg1_speed" = "0xff"	# Fan 2 segment 1 = 100%
					register "hwm_fan2_seg2_speed" = "0xdb"	# Fan 2 segment 2 = 86%
					register "hwm_fan2_seg3_speed" = "0xbc"	# Fan 2 segment 3 = 74%
					register "hwm_fan2_seg4_speed" = "0x9e"	# Fan 2 segment 4 = 62%
					register "hwm_fan2_seg5_speed" = "0x7f"	# Fan 2 segment 5 = 50%
					register "hwm_fan2_temp_src" = "0x1e"	# Fan 2 source = temperature 2
					device pnp 4e.1 off end	# Serial Port 1
					device pnp 4e.4 on	# Hardware monitor
						io 0x60 = 0x295
						irq 0x70 = 0
					end
					device pnp 4e.5 off end	# Keyboard
					device pnp 4e.6 on	# GPIO
						irq 0xc5 = 0x1f
					end
					device pnp 4e.7 on	# WDT
						io 0x60 = 0xa00
					end
					device pnp 4e.8 off end	# CIR
					device pnp 4e.a on	# PME, ACPI, EUP
						irq 0xe0 = 0x90
						irq 0xf8 = 0x00
						irq 0xf9 = 0x09
						irq 0xfa = 0x00
					end
				end
			end
			device ref sata1 on	# SATA Controller 1
				subsystemid 0x174b 0x1007
			end
			device ref smbus on	# SMBus
				subsystemid 0x174b 0x1007
			end
			device ref sata2 off end	# SATA Controller 2
			device ref thermal off end	# Thermal
		end
		device ref host_bridge on	# Host bridge
			subsystemid 0x174b 0x1007
		end
		device ref peg10 on	# PCIe Bridge for discrete graphics
			subsystemid 0x174b 0x1007
		end
		device ref igd on	# Internal graphics VGA controller
			subsystemid 0x8086 0x2010
		end
	end
end