mb/*: Replace SNB PCI devices with references from chipset.cb
Removing default on/off from mainboard devicetrees is left as a follow-up.
Change-Id: I74c34a97ea4340fb11a0db422a48e1418221627e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69502
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
diff --git a/src/mainboard/roda/rv11/variants/rw11/devicetree.cb b/src/mainboard/roda/rv11/variants/rw11/devicetree.cb
index c6aa44c..79c182e 100644
--- a/src/mainboard/roda/rv11/variants/rw11/devicetree.cb
+++ b/src/mainboard/roda/rv11/variants/rw11/devicetree.cb
@@ -25,8 +25,8 @@
end
device domain 0 on
- device pci 00.0 on end # host bridge
- device pci 02.0 on end # vga controller
+ device ref host_bridge on end # host bridge
+ device ref igd on end # vga controller
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
# LPC i/o generic decodes
@@ -57,30 +57,30 @@
register "spi_uvscc" = "0x2005"
register "spi_lvscc" = "0x2005"
- device pci 14.0 on end # USB 3.0 Controller
- device pci 16.0 on end # Management Engine Interface 1
- device pci 16.1 off end # Management Engine Interface 2
- device pci 16.2 off end # Management Engine IDE-R
- device pci 16.3 off end # Management Engine KT
- device pci 19.0 on end # Intel Gigabit Ethernet
- device pci 1a.0 on end # USB2 EHCI #2
- device pci 1b.0 on # High Definition Audio
+ device ref xhci on end # USB 3.0 Controller
+ device ref mei1 on end # Management Engine Interface 1
+ device ref mei2 off end # Management Engine Interface 2
+ device ref me_ide_r off end # Management Engine IDE-R
+ device ref me_kt off end # Management Engine KT
+ device ref gbe on end # Intel Gigabit Ethernet
+ device ref ehci2 on end # USB2 EHCI #2
+ device ref hda on # High Definition Audio
subsystemid 0x1a86 0x4352
end
# Disabling 1c.0 might break IRQ settings as it enables port coalescing
- device pci 1c.0 on end # PCIe Port #1
- device pci 1c.1 on end # PCIe Port #2
- device pci 1c.2 on end # PCIe Port #3
- device pci 1c.3 on end # PCIe Port #4
- device pci 1c.4 on end # PCIe Port #5
- device pci 1c.5 on end # PCIe Port #6
- device pci 1c.6 on end # PCIe Port #7
- device pci 1c.7 on end # PCIe Port #8
+ device ref pcie_rp1 on end # PCIe Port #1
+ device ref pcie_rp2 on end # PCIe Port #2
+ device ref pcie_rp3 on end # PCIe Port #3
+ device ref pcie_rp4 on end # PCIe Port #4
+ device ref pcie_rp5 on end # PCIe Port #5
+ device ref pcie_rp6 on end # PCIe Port #6
+ device ref pcie_rp7 on end # PCIe Port #7
+ device ref pcie_rp8 on end # PCIe Port #8
- device pci 1d.0 on end # USB2 EHCI #1
- device pci 1e.0 off end # PCI bridge
- device pci 1f.0 on # LPC bridge
+ device ref ehci1 on end # USB2 EHCI #1
+ device ref pci_bridge off end # PCI bridge
+ device ref lpc on # LPC bridge
chip ec/roda/it8518
register "cpuhot_limit" = "100"
# 60h/64h KBC
@@ -144,10 +144,10 @@
device pnp 2e.c off end # CIR
end
end # LPC bridge
- device pci 1f.2 on end # SATA Controller 1
- device pci 1f.3 on end # SMBus
- device pci 1f.5 off end # SATA Controller 2
- device pci 1f.6 off end # Thermal
+ device ref sata1 on end # SATA Controller 1
+ device ref smbus on end # SMBus
+ device ref sata2 off end # SATA Controller 2
+ device ref thermal off end # Thermal
end
end
end