src: Fix the warning "type 'hex' are always defined"
This is spotted using "./util/lint/kconfig_lint"
While at it, do the check in C and not the preprocessor.
Change-Id: Icfda267936a23d9d14832116d67571f42f685906
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
diff --git a/src/soc/intel/common/block/pcr/pcr.c b/src/soc/intel/common/block/pcr/pcr.c
index 804ccff..e354c03 100644
--- a/src/soc/intel/common/block/pcr/pcr.c
+++ b/src/soc/intel/common/block/pcr/pcr.c
@@ -21,7 +21,7 @@
#include <soc/pci_devs.h>
#include <timer.h>
-#if !defined(CONFIG_PCR_BASE_ADDRESS) || (CONFIG_PCR_BASE_ADDRESS == 0)
+#if (CONFIG_PCR_BASE_ADDRESS == 0)
#error "PCR_BASE_ADDRESS need to be non-zero!"
#endif
diff --git a/src/soc/intel/skylake/chip.c b/src/soc/intel/skylake/chip.c
index 07ac4e8..cbbfaaa 100644
--- a/src/soc/intel/skylake/chip.c
+++ b/src/soc/intel/skylake/chip.c
@@ -170,12 +170,12 @@
params->LockDownConfigSpiEiss = 0;
}
/* only replacing preexisting subsys ID defaults when non-zero */
-#if defined(CONFIG_SUBSYSTEM_VENDOR_ID) && CONFIG_SUBSYSTEM_VENDOR_ID
- params->PchConfigSubSystemVendorId = CONFIG_SUBSYSTEM_VENDOR_ID;
-#endif
-#if defined(CONFIG_SUBSYSTEM_DEVICE_ID) && CONFIG_SUBSYSTEM_DEVICE_ID
- params->PchConfigSubSystemId = CONFIG_SUBSYSTEM_DEVICE_ID;
-#endif
+ if (CONFIG_SUBSYSTEM_VENDOR_ID != 0)
+ params->PchConfigSubSystemVendorId = CONFIG_SUBSYSTEM_VENDOR_ID;
+
+ if (CONFIG_SUBSYSTEM_DEVICE_ID != 0)
+ params->PchConfigSubSystemId = CONFIG_SUBSYSTEM_DEVICE_ID;
+
params->WakeConfigWolEnableOverride =
config->WakeConfigWolEnableOverride;
params->WakeConfigPcieWakeFromDeepSx =
diff --git a/src/soc/intel/skylake/chip_fsp20.c b/src/soc/intel/skylake/chip_fsp20.c
index 18c2aef..3ade8d7 100644
--- a/src/soc/intel/skylake/chip_fsp20.c
+++ b/src/soc/intel/skylake/chip_fsp20.c
@@ -391,14 +391,16 @@
params->SpiFlashCfgLockDown = 0;
}
/* only replacing preexisting subsys ID defaults when non-zero */
-#if defined(CONFIG_SUBSYSTEM_VENDOR_ID) && CONFIG_SUBSYSTEM_VENDOR_ID
- params->DefaultSvid = CONFIG_SUBSYSTEM_VENDOR_ID;
- params->PchSubSystemVendorId = CONFIG_SUBSYSTEM_VENDOR_ID;
-#endif
-#if defined(CONFIG_SUBSYSTEM_DEVICE_ID) && CONFIG_SUBSYSTEM_DEVICE_ID
- params->DefaultSid = CONFIG_SUBSYSTEM_DEVICE_ID;
- params->PchSubSystemId = CONFIG_SUBSYSTEM_DEVICE_ID;
-#endif
+ if (CONFIG_SUBSYSTEM_VENDOR_ID != 0) {
+ params->DefaultSvid = CONFIG_SUBSYSTEM_VENDOR_ID;
+ params->PchSubSystemVendorId = CONFIG_SUBSYSTEM_VENDOR_ID;
+ }
+
+ if (CONFIG_SUBSYSTEM_DEVICE_ID != 0) {
+ params->DefaultSid = CONFIG_SUBSYSTEM_DEVICE_ID;
+ params->PchSubSystemId = CONFIG_SUBSYSTEM_DEVICE_ID;
+ }
+
params->PchPmWolEnableOverride = config->WakeConfigWolEnableOverride;
params->PchPmPcieWakeFromDeepSx = config->WakeConfigPcieWakeFromDeepSx;
params->PchPmDeepSxPol = config->PmConfigDeepSxPol;