AGESA f14 f15tn 16kb: Move IOAPIC ID setup out of get_bus_conf()
Change-Id: I7fd14c17242cd3deb7a784fc918ad6fe1191bd13
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6359
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
diff --git a/src/mainboard/amd/inagua/mptable.c b/src/mainboard/amd/inagua/mptable.c
index 4a57d3c..7686bd2 100644
--- a/src/mainboard/amd/inagua/mptable.c
+++ b/src/mainboard/amd/inagua/mptable.c
@@ -22,13 +22,12 @@
#include <arch/smp/mpspec.h>
#include <device/pci.h>
#include <arch/io.h>
+#include <arch/ioapic.h>
#include <string.h>
#include <stdint.h>
#include <cpu/amd/amdfam14.h>
#include <SBPLATFORM.h>
-extern u32 apicid_sb800;
-
u8 intr_data[] = {
[0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */
[0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
@@ -48,6 +47,14 @@
struct mp_config_table *mc;
int bus_isa;
+ /*
+ * By the time this function gets called, the IOAPIC registers
+ * have been written so they can be read to get the correct
+ * APIC ID and Version
+ */
+ u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24);
+ u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF);
+
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
mptable_init(mc, LOCAL_APIC_ADDR);
@@ -58,14 +65,10 @@
mptable_write_buses(mc, NULL, &bus_isa);
/* I/O APICs: APIC ID Version State Address */
+ smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR);
- u32 dword;
u8 byte;
- ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword);
- dword &= 0xFFFFFFF0;
- smp_write_ioapic(mc, apicid_sb800, 0x21, dword);
-
for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
outb(byte | 0x80, 0xC00);
outb(intr_data[byte], 0xC01);
@@ -75,13 +78,13 @@
#define IO_LOCAL_INT(type, intr, apicid, pin) \
smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
- mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0);
+ mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0);
/* PCI interrupts are level triggered, and are
* associated with a specific bus/device/function tuple.
*/
#define PCI_INT(bus, dev, fn, pin) \
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin))
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin))
/* APU Internal Graphic Device*/
PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);