fw_config
	field AUDIO 8 10
		option NONE 				0
		option MTL_ALC1019_ALC5682I_I2S		1
		option MTL_MAX98373_ALC5682_SNDW	2
		option MTL_ALC711_SNDW			3
		option MTL_ALC5682I_MAX9857A_I2S	4
	end
end

chip soc/intel/meteorlake

	# GPE configuration
	register "pmc_gpe0_dw0" = "GPP_B"
	register "pmc_gpe0_dw1" = "GPP_D"
	register "pmc_gpe0_dw2" = "GPP_E"

	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
	register "gen1_dec" = "0x00fc0801"
	register "gen2_dec" = "0x000c0201"
	# EC memory map range is 0x900-0x9ff
	register "gen3_dec" = "0x00fc0901"

	register "serial_io_uart_mode" = "{
		[PchSerialIoIndexUART0] = PchSerialIoPci,
		[PchSerialIoIndexUART1] = PchSerialIoDisabled,
		[PchSerialIoIndexUART2] = PchSerialIoDisabled,
	}"

	register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C0
	register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C1
	register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C2
	register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C3
	register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port A0
	register "usb2_ports[5]" = "USB2_PORT_MID(OC0)" # Type-A Port A1
	register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # FPS connector
	register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN / MCF
	register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # MCF / M.2 WWAN
	register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WLAN

	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # USB3.2_Type-A1 / M.2 WWAN
	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # USB3.2_Type-A0 / USB Flex Connector

	register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC0)"
	register "tcss_ports[1]" = "TCSS_PORT_DEFAULT(OC0)"
	register "tcss_ports[2]" = "TCSS_PORT_DEFAULT(OC0)"
	register "tcss_ports[3]" = "TCSS_PORT_DEFAULT(OC0)"

	# Enable CNVi BT
	register "cnvi_bt_core" = "true"

	# Enable S0ix
	register "s0ix_enable" = "1"

	# Enable EDP in PortA
	register "ddi_port_A_config" = "1"
	# Enable HDMI in Port B
	register "ddi_ports_config" = "{
		[DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
	}"

	register "serial_io_i2c_mode" = "{
		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
		[PchSerialIoIndexI2C2]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C3]  = PchSerialIoPci,
		[PchSerialIoIndexI2C4]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C5]  = PchSerialIoDisabled,
	}"

	# Intel Common SoC Config
	register "common_soc_config" = "{
		.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
		.i2c[0] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[1] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[3] = {
			.speed = I2C_SPEED_FAST,
		},
	}"

	register "serial_io_gspi_mode" = "{
		[PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
		[PchSerialIoIndexGSPI1] = PchSerialIoPci,
	}"

	register "serial_io_gspi_cs_mode" = "{
		[PchSerialIoIndexGSPI0] = 0,
		[PchSerialIoIndexGSPI1] = 0,
	}"

	register "serial_io_gspi_cs_state" = "{
		[PchSerialIoIndexGSPI0] = 0,
		[PchSerialIoIndexGSPI1] = 0,
	}"

	# HD Audio
	register "pch_hda_dsp_enable" = "1"
	register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T"
	register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ"
	register "pch_hda_idisp_codec_enable" = "1"

	# DPTF enable
	register "dptf_enable" = "1"

	device domain 0 on
		device ref igpu on end
		device ref ipu on
			chip drivers/intel/mipi_camera
				register "acpi_uid" = "0x50000"
				register "acpi_name" = ""IPU0""
				register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
				register "cio2_num_ports" = "2"
				register "cio2_lanes_used" = "{4,4}"
				register "cio2_lane_endpoint[0]" = ""^I2C1.CAM0""
				register "cio2_lane_endpoint[1]" = ""^I2C0.CAM1""
				register "cio2_prt[0]" = "0"
				register "cio2_prt[1]" = "4"
				device generic 0 on end
			end
		end
		device ref dtt on
			chip drivers/intel/dptf
				## sensor information
				register "options.tsr[0].desc" = ""Ambient""
				register "options.tsr[1].desc" = ""DDR""
				register "options.tsr[2].desc" = ""Skin""
				register "options.tsr[3].desc" = ""Battery""
				## Active Policy
				# TODO: below values are initial reference values only
				register "policies.active" = "{
					[0] = {
							.target = DPTF_CPU,
							.thresholds = {
								TEMP_PCT(95, 90),
								TEMP_PCT(90, 80),
							}
						},
					[1] = {
							.target = DPTF_TEMP_SENSOR_0,
							.thresholds = {
								TEMP_PCT(80, 90),
								TEMP_PCT(70, 80),
							}
						}
				}"
				## Passive Policy
				# TODO: below values are initial reference values only
				register "policies.passive" = "{
					[0] = DPTF_PASSIVE(CPU,		CPU,	       95, 10000),
					[1] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_0, 85, 50000),
					[2] = DPTF_PASSIVE(CHARGER,	TEMP_SENSOR_1, 85, 50000),
					[3] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_2, 85, 50000),
					[4] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_3, 85, 50000),
				}"
				## Critical Policy
				# TODO: below values are initial reference values only
				register "policies.critical" = "{
					[0] = DPTF_CRITICAL(CPU,	  105, SHUTDOWN),
					[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 95, SHUTDOWN),
					[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 95, SHUTDOWN),
					[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 95, SHUTDOWN),
					[4] = DPTF_CRITICAL(TEMP_SENSOR_3, 95, SHUTDOWN),
				}"
				## Power Limits Control
				register "controls.power_limits" = "{
					.pl1 = {
							.min_power = 35000,
							.max_power = 45000,
							.time_window_min = 28 * MSECS_PER_SEC,
							.time_window_max = 32 * MSECS_PER_SEC,
							.granularity = 200,
					},
					.pl2 = {
							.min_power = 56000,
							.max_power = 56000,
							.time_window_min = 28 * MSECS_PER_SEC,
							.time_window_max = 32 * MSECS_PER_SEC,
							.granularity = 1000,
					}
				}"
				## Charger Performance Control (Control, mA)
				register "controls.charger_perf" = "{
					[0] = { 255, 3000 },
					[1] = {  24, 1500 },
					[2] = {  16, 1000 },
					[3] = {   8,  500 }
				}"
				## Fan Performance Control (Percent, Speed, Noise, Power)
				register "controls.fan_perf" = "{
					[0] = {  90, 6700, 220, 2200, },
					[1] = {  80, 5800, 180, 1800, },
					[2] = {  70, 5000, 145, 1450, },
					[3] = {  60, 4900, 115, 1150, },
					[4] = {  50, 3838,  90,  900, },
					[5] = {  40, 2904,  55,  550, },
					[6] = {  30, 2337,  30,  300, },
					[7] = {  20, 1608,  15,  150, },
					[8] = {  10,  800,  10,  100, },
					[9] = {   0,    0,   0,   50, }
				}"
				## Fan options
				register "options.fan.fine_grained_control" = "1"
				register "options.fan.step_size" = "2"
				device generic 0 alias dptf_policy on end
			end
		end
		device ref heci1 on end
		device ref tbt_pcie_rp0 on end
		device ref tbt_pcie_rp1 on end
		device ref tbt_pcie_rp2 on end
		device ref tbt_pcie_rp3 on end
		device ref tcss_xhci on
			chip drivers/usb/acpi
				device ref tcss_root_hub on
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-C Port C0""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(4, 2)"
						device ref tcss_usb3_port0 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-C Port C1""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(3, 2)"
						device ref tcss_usb3_port1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-C Port C2""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(2, 2)"
						device ref tcss_usb3_port2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-C Port C3""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						register "group" = "ACPI_PLD_GROUP(1, 2)"
						device ref tcss_usb3_port3 on end
					end
				end
			end
		end
		device ref tcss_dma0 on
			chip drivers/intel/usb4/retimer
				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)"
				use tcss_usb3_port0 as dfp[0].typec_port
				device generic 0 on end
			end
			chip drivers/intel/usb4/retimer
				register "dfp[1].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)"
				use tcss_usb3_port1 as dfp[1].typec_port
				device generic 0 on end
			end
		end
		device ref tcss_dma1 on
			chip drivers/intel/usb4/retimer
				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)"
				use tcss_usb3_port2 as dfp[0].typec_port
				device generic 0 on end
			end
			chip drivers/intel/usb4/retimer
				register "dfp[1].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)"
				use tcss_usb3_port3 as dfp[1].typec_port
				device generic 0 on end
			end
		end
		device ref pcie_rp6 on
			# Enable PCH PCIE x1 slot using CLK 3
			register "pcie_rp[PCIE_RP(6)]" = "{
				.clk_src = 3,
				.clk_req = 3,
				.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER,
			}"
			chip soc/intel/common/block/pcie/rtd3
				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A18)"
				register "enable_delay_ms" = "100"
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A19)"
				register "reset_delay_ms" = "20"
				register "srcclk_pin" = "3"
				device generic 0 on
				end
			end
		end # PCIE x1 slot
		device ref pcie_rp7  on
			# Enable PCH PCIE RP 7 using CLK 1
			register "pcie_rp[PCIE_RP(7)]" = "{
				.clk_src = 1,
				.clk_req = 1,
				.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER,
			}"
			chip soc/intel/common/block/pcie/rtd3
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C05)"
				register "reset_off_delay_ms" = "20"
				register "srcclk_pin" = "1"
				register "ext_pm_support" = "ACPI_PCIE_RP_EMIT_ALL"
				register "skip_on_off_support" = "true"
				register "use_rp_mutex" = "true"
				device generic 0 alias rp7_rtd3 on end
			end
			chip drivers/wwan/fm
				register "fcpo_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E07)"
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A15)"
				register "perst_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C05)"
				register "wake_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F10)"
				register "add_acpi_dma_property" = "true"
				use rp7_rtd3 as rtd3dev
				device generic 0 on end
			end
		end # WWAN
		device ref pcie_rp8  on
			# Enable PCH PCIE RP 8 using CLK 5
			register "pcie_rp[PCIE_RP(8)]" = "{
				.clk_src = 5,
				.clk_req = 5,
				.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER,
			}"
		end # WLAN
		device ref pcie_rp10 on
			# Enable SSD Gen4 PCIE 10 using CLK 8
			register "pcie_rp[PCIE_RP(10)]" = "{
				.clk_src = 8,
				.clk_req = 8,
				.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER,
			}"
		end # PCIE10 SSD Gen4
		device ref pcie_rp11 on
			# Enable SSD Gen4 PCIE 11 using CLK 7
			register "pcie_rp[PCIE_RP(11)]" = "{
				.clk_src = 7,
				.clk_req = 7,
				.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER,
			}"
		end # PCIE11 SSD Gen4
		device ref xhci on
			chip drivers/usb/acpi
				device ref xhci_root_hub on
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 1""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(1, 1)"
						device ref usb2_port1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 2""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(2, 1)"
						device ref usb2_port2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 3""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(3, 1)"
						device ref usb2_port3 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 4""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(4, 1)"
						device ref usb2_port4 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 5""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(5, 1)"
						device ref usb2_port5 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 6""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(6, 1)"
						device ref usb2_port6 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 7""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(7, 1)"
						device ref usb2_port7 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 8""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(8, 1)"
						device ref usb2_port8 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 9""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(9, 1)"
						device ref usb2_port9 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Port 10""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(10, 1)"
						device ref usb2_port10 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-A Port 1""
						register "type" = "UPC_TYPE_USB3_A"
						register "group" = "ACPI_PLD_GROUP(1, 2)"
						device ref usb3_port1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-A Port 2""
						register "type" = "UPC_TYPE_USB3_A"
						register "group" = "ACPI_PLD_GROUP(2, 2)"
						device ref usb3_port2 on end
					end
				end
			end
		end
		device ref cnvi_wifi on
			chip drivers/wifi/generic
				register "wake" = "GPE0_PME_B0"
				register "enable_cnvi_ddr_rfim" = "true"
				device generic 0 on end
			end
		end
		device ref i2c0 on
			chip drivers/intel/mipi_camera
				register "acpi_hid" = ""OVTIDB10""
				register "acpi_uid" = "0"
				register "acpi_name" = ""CAM1""
				register "chip_name" = ""Ov 13b10 Camera""
				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"

				register "ssdb.lanes_used" = "4"
				register "num_freq_entries" = "1"
				register "link_freq[0]" = "560000000"
				register "remote_name" = ""IPU0""

				register "has_power_resource" = "1"
				#Controls
				register "clk_panel.clks[0].clknum" = "0"
				register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
				register "gpio_panel.gpio[0].gpio_num" = "GPP_A17" #power_enable
				register "gpio_panel.gpio[1].gpio_num" = "GPP_H00" #reset

				#_ON
				register "on_seq.ops_cnt" = "4"
				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 2)"
				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 1)"
				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 1)"

				#_OFF
				register "off_seq.ops_cnt" = "3"
				register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"

				device i2c 36 on end
			end
		end
		device ref i2c1 on
			chip drivers/intel/mipi_camera
				register "acpi_hid" = ""OVTIDB10""
				register "acpi_uid" = "0"
				register "acpi_name" = ""CAM0""
				register "chip_name" = ""Ov 13b10 Camera""
				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"

				register "ssdb.vcm_type" = "0x0C"
				register "vcm_name" = ""VCM1""

				register "ssdb.lanes_used" = "4"
				register "num_freq_entries" = "1"
				register "link_freq[0]" = "560000000"
				register "remote_name" = ""IPU0""

				register "has_power_resource" = "1"
				#Controls
				register "clk_panel.clks[0].clknum" = "2"
				register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
				register "gpio_panel.gpio[0].gpio_num" = "GPP_C08" #power_enable
				register "gpio_panel.gpio[1].gpio_num" = "GPP_V23" #reset

				#_ON
				register "on_seq.ops_cnt" = "4"
				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 2)"
				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 1)"
				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 1)"

				#_OFF
				register "off_seq.ops_cnt" = "3"
				register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"

				device i2c 36 on end
			end
			chip drivers/intel/mipi_camera
				register "acpi_uid" = "3"
				register "acpi_name" = ""VCM1""
				register "chip_name" = ""DW AF VCM""
				register "device_type" = "INTEL_ACPI_CAMERA_VCM"

				register "pr0" = ""\\_SB.PCI0.I2C1.CAM0.PRIC""
				register "vcm_compat" = ""dongwoon,dw9714""

				device i2c 0C on end
			end
			chip drivers/intel/mipi_camera
				register "acpi_uid" = "1"
				register "acpi_name" = ""NVM1""
				register "chip_name" = ""BRCA016GWZ""
				register "device_type" = "INTEL_ACPI_CAMERA_NVM"

				register "pr0" = ""\\_SB.PCI0.I2C1.CAM0.PRIC""
				register "nvm_compat" = ""atmel,24c16""

				register "nvm_size" = "0x800"
				register "nvm_pagesize" = "0x01"
				register "nvm_readonly" = "0x01"
				register "nvm_width" = "0x08"

				device i2c 50 on end
			end
		end
		device ref i2c2 on end
		device ref i2c3 on
			chip drivers/i2c/generic
				register "hid" = ""10EC5682""
				register "name" = ""RT58""
				register "desc" = ""Headset Codec""
				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_S05)"
				register "probed" = "1"
				# jd_src RT5668_JD1 = 1, RT5682_JD_NULL = 0
				register "property_count" = "1"
				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
				register "property_list[0].name" = ""realtek,jd-src""
				register "property_list[0].integer" = "1"
				device i2c 1a on
					probe AUDIO MTL_ALC1019_ALC5682I_I2S
					probe AUDIO MTL_ALC5682I_MAX9857A_I2S
				end
			end
			# Ref config #5 for Chrome, transducer card config 5A
			#+-------------------+-------------------+
			#| Speaker Amp       | Assignment        |
			#+-------------------+-------------------+
			#| SPK 0             | left              |
			#| SPK 1             | right             |
			#| SPK 2             | top left          |
			#| SPK 3             | top right         |
			#+-------------------+-------------------+
			chip drivers/i2c/generic
				register "hid" = ""10EC1019""
				register "desc" = ""Realtek SPK AMP L""
				register "uid" = "0"
				device i2c 28 on
					probe AUDIO MTL_ALC1019_ALC5682I_I2S
				end
			end
			chip drivers/i2c/generic
				register "hid" = ""10EC1019""
				register "desc" = ""Realtek SPK AMP R""
				register "uid" = "1"
				device i2c 29 on
					probe AUDIO MTL_ALC1019_ALC5682I_I2S
				end
			end
			chip drivers/i2c/generic
				register "hid" = ""10EC1019""
				register "desc" = ""Realtek SPK AMP TL""
				register "uid" = "2"
				device i2c 2a on
					probe AUDIO MTL_ALC1019_ALC5682I_I2S
				end
			end
			chip drivers/i2c/generic
				register "hid" = ""10EC1019""
				register "desc" = ""Realtek SPK AMP TR""
				register "uid" = "3"
				device i2c 2b on
					probe AUDIO MTL_ALC1019_ALC5682I_I2S
				end
			end
		end # I2C3
		device ref i2c4 on end
		device ref i2c5 on end
		device ref shared_sram on end
		device ref uart0 on end
		device ref gspi1 on end
		device ref smbus on end
		device ref hda on
			chip drivers/intel/soundwire
				device generic 0 on
					chip drivers/soundwire/alc711
						# SoundWire Link 0 ID 1
						register "desc" = ""Headset Codec""
						device generic 0.1 on
							probe AUDIO MTL_ALC711_SNDW
						end
					end
					chip drivers/soundwire/alc5682
						# SoundWire Link 2 ID 1
						register "desc" = ""Headset Codec""
						device generic 2.1 on
							probe AUDIO MTL_MAX98373_ALC5682_SNDW
						end
					end
					chip drivers/soundwire/max98373
						# SoundWire Link 0 ID 3
						register "desc" = ""Left Speaker Amp""
						device generic 0.3 on
							probe AUDIO MTL_MAX98373_ALC5682_SNDW
						end
					end
					chip drivers/soundwire/max98373
						# SoundWire Link 0 ID 7
						register "desc" = ""Right Speaker Amp""
						device generic 0.7 on
							probe AUDIO MTL_MAX98373_ALC5682_SNDW
						end
					end
				end
			end
			chip drivers/generic/max98357a
				register "hid" = ""MX98357A""
				register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_S04)"
				register "sdmode_delay" = "5"
				device generic 0 on
					probe AUDIO MTL_ALC5682I_MAX9857A_I2S
				end
			end
		end
	end
end