AMD Kabini: Add AGESA/PI code for new processor family
Change-Id: Icb6f64e2e3cfd678fb4fb4f13f0e4b678d5acc4a
Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com>
Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
Reviewed-by: Nick Dill <nick.dill@se-eng.com>
Tested-by: Bruce Griffith <bruce.griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/3836
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
diff --git a/src/vendorcode/amd/agesa/Makefile.inc b/src/vendorcode/amd/agesa/Makefile.inc
index 824595d..99356a6 100644
--- a/src/vendorcode/amd/agesa/Makefile.inc
+++ b/src/vendorcode/amd/agesa/Makefile.inc
@@ -3,3 +3,4 @@
subdirs-$(CONFIG_CPU_AMD_AGESA_FAMILY14) += f14
subdirs-$(CONFIG_CPU_AMD_AGESA_FAMILY15) += f15
subdirs-$(CONFIG_CPU_AMD_AGESA_FAMILY15_TN) += f15tn
+subdirs-$(CONFIG_CPU_AMD_AGESA_FAMILY16_KB) += f16kb
diff --git a/src/vendorcode/amd/agesa/f16kb/AGESA.h b/src/vendorcode/amd/agesa/f16kb/AGESA.h
new file mode 100644
index 0000000..5c40110
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/AGESA.h
@@ -0,0 +1,3912 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Agesa structures and definitions
+ *
+ * Contains AMD AGESA core interface
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Include
+ * @e \$Revision: 85818 $ @e \$Date: 2013-01-11 17:04:21 -0600 (Fri, 11 Jan 2013) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+
+#ifndef _AGESA_H_
+#define _AGESA_H_
+
+#include "Porting.h"
+#include "AMD.h"
+
+//
+//
+// AGESA Types and Definitions
+//
+//
+
+// AGESA BASIC CALLOUTS
+#define AGESA_MEM_RELEASE 0x00028000ul
+
+// AGESA ADVANCED CALLOUTS, Processor
+#define AGESA_CHECK_UMA 0x00028100ul
+#define AGESA_DO_RESET 0x00028101ul
+#define AGESA_ALLOCATE_BUFFER 0x00028102ul
+#define AGESA_DEALLOCATE_BUFFER 0x00028103ul
+#define AGESA_LOCATE_BUFFER 0x00028104ul
+#define AGESA_RUNFUNC_ONAP 0x00028105ul
+
+// AGESA ADVANCED CALLOUTS, HyperTransport
+
+// AGESA ADVANCED CALLOUTS, Memory
+#define AGESA_READ_SPD 0x00028140ul
+#define AGESA_HOOKBEFORE_DRAM_INIT 0x00028141ul
+#define AGESA_HOOKBEFORE_DQS_TRAINING 0x00028142ul
+#define AGESA_READ_SPD_RECOVERY 0x00028143ul
+#define AGESA_HOOKBEFORE_EXIT_SELF_REF 0x00028144ul
+#define AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY 0x00028145ul
+#define AGESA_EXTERNAL_VOLTAGE_ADJUST 0x00028147ul
+
+// AGESA IDS CALLOUTS
+#define AGESA_GET_IDS_INIT_DATA 0x00028200ul
+
+// AGESA GNB CALLOUTS
+#define AGESA_GNB_PCIE_SLOT_RESET 0x00028301ul
+#define AGESA_GNB_GFX_GET_VBIOS_IMAGE 0x00028302ul
+
+// AGESA FCH CALLOUTS
+#define AGESA_FCH_OEM_CALLOUT 0x00028401ul
+
+//------------------------------------------------------------------------
+//
+// HyperTransport Interface
+
+
+
+//-----------------------------------------------------------------------------
+// HT DEFINITIONS AND MACROS
+//
+//-----------------------------------------------------------------------------
+
+
+// Width equates for call backs
+#define HT_WIDTH_8_BITS 8 ///< Specifies 8 bit, or up to 8 bit widths.
+#define HT_WIDTH_16_BITS 16 ///< Specifies 16 bit, or up to 16 bit widths.
+#define HT_WIDTH_4_BITS 4
+#define HT_WIDTH_2_BITS 2
+#define HT_WIDTH_NO_LIMIT HT_WIDTH_16_BITS
+
+// Frequency Limit equates for call backs which take a frequency supported mask.
+#define HT_FREQUENCY_LIMIT_200M 1 ///< Specifies a limit of no more than 200 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_400M 7 ///< Specifies a limit of no more than 400 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_600M 0x1F ///< Specifies a limit of no more than 600 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_800M 0x3F ///< Specifies a limit of no more than 800 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_1000M 0x7F ///< Specifies a limit of no more than 1000 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_HT1_ONLY 0x7F ///< Specifies a limit of no more than 1000 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_1200M 0xFF ///< Specifies a limit of no more than 1200 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_1400M 0x1FF ///< Specifies a limit of no more than 1400 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_1600M 0x3FF ///< Specifies a limit of no more than 1600 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_1800M 0x7FF ///< Specifies a limit of no more than 1800 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_2000M 0xFFF ///< Specifies a limit of no more than 2000 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_2200M 0x1FFF ///< Specifies a limit of no more than 2200 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_2400M 0x3FFF ///< Specifies a limit of no more than 2400 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_2600M 0x7FFF ///< Specifies a limit of no more than 2600 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_2800M 0x27FFFul ///< Specifies a limit of no more than 2800 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_3000M 0x67FFFul ///< Specifies a limit of no more than 3000 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_3200M 0xE7FFFul ///< Specifies a limit of no more than 3200 MHz HT frequency.
+#define HT_FREQUENCY_LIMIT_3600M 0x1E7FFFul
+#define HT_FREQUENCY_LIMIT_MAX HT_FREQUENCY_LIMIT_3600M
+#define HT_FREQUENCY_NO_LIMIT 0xFFFFFFFFul ///< Specifies a no limit of HT frequency.
+
+// Unit ID Clumping special values
+#define HT_CLUMPING_DISABLE 0x00000000ul
+#define HT_CLUMPING_NO_LIMIT 0xFFFFFFFFul
+
+#define HT_LIST_TERMINAL 0xFF ///< End of list.
+#define HT_LIST_MATCH_ANY 0xFE ///< Match Any value, used for Sockets, Links, IO Chain Depth.
+#define HT_LIST_MATCH_INTERNAL_LINK 0xFD ///< Match all of the internal links.
+
+// Event Notify definitions
+
+// Event definitions.
+
+// Coherent subfunction events
+#define HT_EVENT_COH_EVENTS 0x10001000ul
+#define HT_EVENT_COH_NO_TOPOLOGY 0x10011000ul ///< See ::HT_EVENT_DATA_COH_NO_TOPOLOGY.
+#define HT_EVENT_COH_OBSOLETE000 0x10021000ul // No longer used.
+#define HT_EVENT_COH_PROCESSOR_TYPE_MIX 0x10031000ul ///< See ::HT_EVENT_DATA_COH_PROCESSOR_TYPE_MIX.
+#define HT_EVENT_COH_NODE_DISCOVERED 0x10041000ul ///< See ::HT_EVENT_COH_NODE_DISCOVERED.
+#define HT_EVENT_COH_MPCAP_MISMATCH 0x10051000ul ///< See ::HT_EVENT_COH_MPCAP_MISMATCH.
+
+// Non-coherent subfunction events
+#define HT_EVENT_NCOH_EVENTS 0x10002000ul
+#define HT_EVENT_NCOH_BUID_EXCEED 0x10012000ul ///< See ::HT_EVENT_DATA_NCOH_BUID_EXCEED
+#define HT_EVENT_NCOH_OBSOLETE000 0x10022000ul // No longer used.
+#define HT_EVENT_NCOH_BUS_MAX_EXCEED 0x10032000ul ///< See ::HT_EVENT_DATA_NCOH_BUS_MAX_EXCEED.
+#define HT_EVENT_NCOH_CFG_MAP_EXCEED 0x10042000ul ///< See ::HT_EVENT_DATA_NCOH_CFG_MAP_EXCEED.
+#define HT_EVENT_NCOH_DEVICE_FAILED 0x10052000ul ///< See ::HT_EVENT_DATA_NCOH_DEVICE_FAILED
+#define HT_EVENT_NCOH_AUTO_DEPTH 0x10062000ul ///< See ::HT_EVENT_NCOH_AUTO_DEPTH
+
+// Optimization subfunction events
+#define HT_EVENT_OPT_EVENTS 0x10003000ul
+#define HT_EVENT_OPT_REQUIRED_CAP_RETRY 0x10013000ul ///< See ::HT_EVENT_DATA_OPT_REQUIRED_CAP.
+#define HT_EVENT_OPT_REQUIRED_CAP_GEN3 0x10023000ul ///< See ::HT_EVENT_DATA_OPT_REQUIRED_CAP.
+#define HT_EVENT_OPT_UNUSED_LINKS 0x10033000ul ///< See ::HT_EVENT_DATA_OPT_UNUSED_LINKS.
+#define HT_EVENT_OPT_LINK_PAIR_EXCEED 0x10043000ul ///< See ::HT_EVENT_DATA_OPT_LINK_PAIR_EXCEED.
+
+// HW Fault events
+#define HT_EVENT_HW_EVENTS 0x10004000ul
+#define HT_EVENT_HW_SYNCFLOOD 0x10014000ul ///< See ::HT_EVENT_DATA_HW_SYNCFLOOD.
+#define HT_EVENT_HW_HTCRC 0x10024000ul ///< See ::HT_EVENT_DATA_HW_HT_CRC.
+
+// The Recovery HT component uses 0x10005000 for events.
+// For consistency, we avoid that range here.
+
+#define HT_MAX_NC_BUIDS 32
+//----------------------------------------------------------------------------
+// HT TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+
+/// Specify the state redundant links are to be left in after match.
+///
+/// After matching a link for IGNORE_LINK or SKIP_REGANG, the link may be left alone,
+/// or powered off.
+
+typedef enum {
+ MATCHED, ///< The link matches the requested customization.
+ ///< When used with IGNORE_LINK,
+ ///< this will generally require other software to initialize the link.
+ ///< When used with SKIP_REGANG,
+ ///< the two unganged links will be available for distribution.
+
+ POWERED_OFF, ///< Power the link off. Support may vary based on processor model.
+ ///< Power Off is only supported for coherent links.
+ ///< Link power off may occur at a warm reset rather than immediately.
+ ///< When used with SKIP_REGANG, the paired sublink is powered off, not the matching link.
+
+ UNMATCHED, ///< The link should be processed according to normal defaults.
+ ///< Effectively, the link does not match the requested customization.
+ ///< This can be used to exclude links from a following match any.
+
+ MaxFinalLinkState ///< Not a final link state, use for limit checking.
+} FINAL_LINK_STATE;
+
+/// Swap a device from its current id to a new one.
+
+typedef struct {
+ IN UINT8 FromId; ///< The device responding to FromId,
+ IN UINT8 ToId; ///< will be moved to ToId.
+} BUID_SWAP_ITEM;
+
+
+/// Each Non-coherent chain may have a list of device swaps. After performing the swaps,
+/// the final in order list of device ids is provided. (There can be more swaps than devices.)
+/// The unused entries in both are filled with 0xFF.
+
+typedef struct {
+ IN BUID_SWAP_ITEM Swaps[HT_MAX_NC_BUIDS]; ///< The BUID Swaps to perform
+ IN UINT8 FinalIds[HT_MAX_NC_BUIDS]; ///< The ordered final BUIDs, resulting from the swaps
+} BUID_SWAP_LIST;
+
+
+/// Control Manual Initialization of Non-Coherent Chains
+///
+/// This interface is checked every time a non-coherent chain is
+/// processed. BUID assignment may be controlled explicitly on a
+/// non-coherent chain. Provide a swap list. Swaps controls the
+/// BUID assignment and FinalIds provides the device to device
+/// Linking. Device orientation can be detected automatically, or
+/// explicitly. See interface documentation for more details.
+///
+/// If a manual swap list is not supplied,
+/// automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially
+/// based on each device's unit count.
+
+typedef struct {
+ // Match fields
+ IN UINT8 Socket; ///< The Socket on which this chain is located
+ IN UINT8 Link; ///< The Link on the host for this chain
+ // Override fields
+ IN BUID_SWAP_LIST SwapList; ///< The swap list
+} MANUAL_BUID_SWAP_LIST;
+
+
+/// Override options for DEVICE_CAP_OVERRIDE.
+///
+/// Specify which override actions should be performed. For Checks, 1 means to check the item
+/// and 0 means to skip the check. For the override options, 1 means to apply the override and
+/// 0 means to ignore the override.
+
+typedef struct {
+ IN UINT32 IsCheckDevVenId:1; ///< Check Match on Device/Vendor id
+ IN UINT32 IsCheckRevision:1; ///< Check Match on device Revision
+ IN UINT32 IsOverrideWidthIn:1; ///< Override Width In
+ IN UINT32 IsOverrideWidthOut:1; ///< Override Width Out
+ IN UINT32 IsOverrideFreq:1; ///< Override Frequency
+ IN UINT32 IsOverrideClumping:1; ///< Override Clumping
+ IN UINT32 IsDoCallout:1; ///< Make the optional callout
+} DEVICE_CAP_OVERRIDE_OPTIONS;
+
+/// Override capabilities of a device.
+///
+/// This interface is checked once for every Link on every IO device.
+/// Provide the width and frequency capability if needed for this device.
+/// This is used along with device capabilities, the limit interfaces, and northbridge
+/// limits to compute the default settings. The components of the device's PCI config
+/// address are provided, so its settings can be consulted if need be.
+/// The optional callout is a catch all.
+
+typedef struct {
+ // Match fields
+ IN UINT8 HostSocket; ///< The Socket on which this chain is located.
+ IN UINT8 HostLink; ///< The Link on the host for this chain.
+ IN UINT8 Depth; ///< The Depth in the I/O chain from the Host.
+ IN UINT32 DevVenId; ///< The Device's PCI Vendor + Device ID (offset 0x00).
+ IN UINT8 Revision; ///< The Device's PCI Revision field (offset 0x08).
+ IN UINT8 Link; ///< The Device's Link number (0 or 1).
+ IN DEVICE_CAP_OVERRIDE_OPTIONS Options; ///< The options for this device override.
+ // Override fields
+ IN UINT8 LinkWidthIn; ///< modify to change the Link Width In.
+ IN UINT8 LinkWidthOut; ///< modify to change the Link Width Out.
+ IN UINT32 FreqCap; ///< modify to change the Link's frequency capability.
+ IN UINT32 Clumping; ///< modify to change Unit ID clumping support.
+ IN CALLOUT_ENTRY Callout; ///< optional call for really complex cases, or NULL.
+} DEVICE_CAP_OVERRIDE;
+
+/// Callout param struct for override capabilities of a device.
+///
+/// If the optional callout is implemented this param struct is passed to it.
+
+typedef struct {
+ IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ // Match fields
+ IN UINT8 HostSocket; ///< The Socket on which this chain is located.
+ IN UINT8 HostLink; ///< The Link on the host for this chain.
+ IN UINT8 Depth; ///< The Depth in the I/O chain from the Host.
+ IN UINT32 DevVenId; ///< The Device's PCI Vendor + Device ID (offset 0x00).
+ IN UINT8 Revision; ///< The Device's PCI Revision field (offset 0x08).
+ IN UINT8 Link; ///< The Device's Link number (0 or 1).
+ IN PCI_ADDR PciAddress; ///< The Device's PCI Address.
+ // Override fields
+ OUT UINT8 *LinkWidthIn; ///< modify to change the Link Width In.
+ OUT UINT8 *LinkWidthOut; ///< modify to change the Link Width Out.
+ OUT UINT32 *FreqCap; ///< modify to change the Link's frequency capability.
+ OUT UINT32 *Clumping; ///< modify to change Unit ID clumping support.
+} DEVICE_CAP_CALLOUT_PARAMS;
+
+/// Limits for CPU to CPU Links.
+///
+/// For each coherent connection this interface is checked once.
+/// Provide the frequency and width if needed for this Link (usually based on board
+/// restriction). This is used with CPU device capabilities and northbridge limits
+/// to compute the default settings.
+
+typedef struct {
+ // Match fields
+ IN UINT8 SocketA; ///< One Socket on which this Link is located
+ IN UINT8 LinkA; ///< The Link on this Node
+ IN UINT8 SocketB; ///< The other Socket on which this Link is located
+ IN UINT8 LinkB; ///< The Link on that Node
+ // Limit fields
+ IN UINT8 ABLinkWidthLimit; ///< modify to change the Link Width A->B
+ IN UINT8 BALinkWidthLimit; ///< modify to change the Link Width B-<A
+ IN UINT32 PcbFreqCap; ///< modify to change the Link's frequency capability
+} CPU_TO_CPU_PCB_LIMITS;
+
+/// Get limits for non-coherent Links.
+///
+/// For each non-coherent connection this interface is checked once.
+/// Provide the frequency and width if needed for this Link (usually based on board
+/// restriction). This is used with device capabilities, device overrides, and northbridge limits
+/// to compute the default settings.
+///
+typedef struct {
+ // Match fields
+ IN UINT8 HostSocket; ///< The Socket on which this Link is located
+ IN UINT8 HostLink; ///< The Link about to be initialized
+ IN UINT8 Depth; ///< The Depth in the I/O chain from the Host
+ // Limit fields
+ IN UINT8 DownstreamLinkWidthLimit; ///< modify to change the Link Width going away from processor
+ IN UINT8 UpstreamLinkWidthLimit; ///< modify to change the Link Width moving toward processor
+ IN UINT32 PcbFreqCap; ///< modify to change the Link's frequency capability
+} IO_PCB_LIMITS;
+
+/// Manually control bus number assignment.
+///
+/// This interface is checked every time a non-coherent chain is processed.
+/// If a system can not use the auto Bus numbering feature for non-coherent chain bus
+/// assignments, this interface can provide explicit control. For each chain, provide
+/// the bus number range to use.
+
+typedef struct {
+ // Match fields
+ IN UINT8 Socket; ///< The Socket on which this chain is located
+ IN UINT8 Link; ///< The Link on the host for this chain
+ // Override fields
+ IN UINT8 SecBus; ///< Secondary Bus number for this non-coherent chain
+ IN UINT8 SubBus; ///< Subordinate Bus number
+} OVERRIDE_BUS_NUMBERS;
+
+
+/// Ignore a Link.
+///
+/// This interface is checked every time a coherent Link is found and then every
+/// time a non-coherent Link from a CPU is found.
+/// Any coherent or non-coherent Link from a CPU can be ignored and not used
+/// for discovery or initialization. Useful for connection based systems.
+/// (Note: not checked for IO device to IO Device Links.)
+/// (Note: not usable for internal links (MCM processors).)
+
+typedef struct {
+ // Match fields
+ IN UINT8 Socket; ///< The Socket on which this Link is located
+ IN UINT8 Link; ///< The Link about to be initialized
+ // Customization fields
+ IN FINAL_LINK_STATE LinkState; ///< The link may be left unitialized, or powered off.
+} IGNORE_LINK;
+
+
+/// Skip reganging of subLinks.
+///
+/// This interface is checked whenever two subLinks are both connected to the same CPUs.
+/// Normally, unganged sublinks between the same two CPUs are reganged.
+/// Provide a matching structure to leave the Links unganged.
+
+typedef struct {
+ // Match fields
+ IN UINT8 SocketA; ///< One Socket on which this Link is located
+ IN UINT8 LinkA; ///< The Link on this Node
+ IN UINT8 SocketB; ///< The other Socket on which this Link is located
+ IN UINT8 LinkB; ///< The Link on that Node
+ // Customization fields
+ IN FINAL_LINK_STATE LinkState; ///< The paired sublink may be active, or powered off.
+} SKIP_REGANG;
+
+/// The System Socket layout, which sockets are physically connected.
+///
+/// The hardware method for Socket naming is preferred. Use this software method only
+/// if required.
+
+typedef struct {
+ IN UINT8 CurrentSocket; ///< The socket from which this connection originates.
+ IN UINT8 CurrentLink; ///< The Link from the source socket connects to another socket.
+ IN UINT8 TargetSocket; ///< The target socket which is connected on that link.
+} SYSTEM_PHYSICAL_SOCKET_MAP;
+
+//----------------------------------------------------------------------------
+///
+/// This is the input structure for AmdHtInitialize.
+///
+typedef struct {
+ // Basic level customization
+ IN UINT8 AutoBusStart; ///< For automatic bus number assignment, starting bus number - usually zero.
+ ///< @BldCfgItem{BLDCFG_STARTING_BUSNUM}
+ IN UINT8 AutoBusMax; ///< For automatic bus number assignment, do not assign above max.
+ ///< @BldCfgItem{BLDCFG_MAXIMUM_BUSNUM}
+ IN UINT8 AutoBusIncrement; ///< For automatic bus number assignment, each chain gets this many busses.
+ ///< @BldCfgItem{BLDCFG_ALLOCATED_BUSNUM}
+
+ // Advanced Level Customization
+ IN MANUAL_BUID_SWAP_LIST *ManualBuidSwapList; ///< Provide Manual Swap List, if any.
+ ///< @BldCfgItem{BLDCFG_BUID_SWAP_LIST}
+ IN DEVICE_CAP_OVERRIDE *DeviceCapOverrideList; ///< Provide Device Overrides, if any.
+ ///< @BldCfgItem{BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST}
+ IN CPU_TO_CPU_PCB_LIMITS *CpuToCpuPcbLimitsList; ///< Provide CPU PCB Limits, if any.
+ ///< @BldCfgItem{BLDCFG_HTFABRIC_LIMITS_LIST}.
+ ///< @n @e Examples: See @ref FrequencyLimitExamples "Frequency Limit Examples".
+ IN IO_PCB_LIMITS *IoPcbLimitsList; ///< Provide IO PCB Limits, if any.
+ ///< @BldCfgItem{BLDCFG_HTCHAIN_LIMITS_LIST}.
+ ///< @n @e Examples: See @ref FrequencyLimitExamples "Frequency Limit Examples".
+ IN OVERRIDE_BUS_NUMBERS *OverrideBusNumbersList; ///< Provide manual Bus Number assignment, if any.
+ ///< Use either auto bus numbering or override bus
+ ///< numbers, not both.
+ ///< @BldCfgItem{BLDCFG_BUS_NUMBERS_LIST}
+
+ IN IGNORE_LINK *IgnoreLinkList; ///< Provide links to ignore, if any.
+ ///< @BldCfgItem{BLDCFG_IGNORE_LINK_LIST}
+ IN SKIP_REGANG *SkipRegangList; ///< Provide links to remain unganged, if any.
+ ///< @BldCfgItem{BLDCFG_LINK_SKIP_REGANG_LIST}
+ ///< @n @e Examples: See @ref PerfPerWattHt "Performance-per-watt Optimization".
+
+ // Expert Level Customization
+ IN UINT8 **Topolist; ///< Use this topology list in addition to the built in, if not NULL.
+ ///< @BldCfgItem{BLDCFG_ADDITIONAL_TOPOLOGIES_LIST}
+ IN SYSTEM_PHYSICAL_SOCKET_MAP *SystemPhysicalSocketMap;
+ ///< The hardware socket naming method is preferred,
+ ///< If it can't be used, this provides a software method.
+ ///< @BldCfgItem{BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP}
+} AMD_HT_INTERFACE;
+
+//-----------------------------------------------------------------------------
+//
+// HT Recovery Interface
+//
+
+
+/*-----------------------------------------------------------------------------
+ * HT Recovery DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+// BBHT subfunction events
+#define HT_EVENT_BB_EVENTS 0x10005000ul
+#define HT_EVENT_BB_BUID_EXCEED 0x10015000ul
+#define HT_EVENT_BB_DEVICE_FAILED 0x10055000ul
+#define HT_EVENT_BB_AUTO_DEPTH 0x10065000ul
+
+/*----------------------------------------------------------------------------
+ * HT Recovery TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/// The Interface structure to Recovery HT.
+
+typedef struct {
+ IN MANUAL_BUID_SWAP_LIST *ManualBuidSwapList; ///< Option to manually control SB link init
+ ///< @BldCfgItem{BLDCFG_BUID_SWAP_LIST}
+ OUT UINT32 Depth; ///< If auto init was used this is set to the depth of the chain,
+ ///< else, for manual init unmodified.
+} AMD_HT_RESET_INTERFACE;
+
+
+//-----------------------------------------------------------------------------
+// FCH DEFINITIONS AND MACROS
+//
+//-----------------------------------------------------------------------------
+
+/// Configuration values for SdConfig
+typedef enum {
+ SdDisable = 0, ///< Disabled
+ SdAmda, ///< AMDA, set 24,18,16, default
+ SdDma, ///< DMA clear 24, 16, set 18
+ SdPio ///< PIO clear 24,18,16
+} SD_MODE;
+
+/// Configuration values for SdClockControl
+typedef enum {
+ Sd50MhzTraceCableLengthWithinSixInches = 4, ///< 50Mhz, default
+ Sd40MhzTraceCableLengthSix2ElevenInches = 6, ///< 40Mhz
+ Sd25MhzTraceCableLengthEleven2TwentyfourInches = 7, ///< 25Mhz
+} SD_CLOCK_CONTROL;
+
+/// Configuration values for IrConfig
+typedef enum {
+ IrDisable = 0, ///< Disable
+ IrRxTx0 = 1, ///< Rx and Tx0
+ IrRxTx1 = 2, ///< Rx and Tx1
+ IrRxTx0Tx1 = 3 ///< Rx and both Tx0,Tx1
+} IR_CONFIG;
+
+/// Configuration values for SataClass
+typedef enum {
+ SataNativeIde = 0, ///< Native IDE mode
+ SataRaid, ///< RAID mode
+ SataAhci, ///< AHCI mode
+ SataLegacyIde, ///< Legacy IDE mode
+ SataIde2Ahci, ///< IDE->AHCI mode
+ SataAhci7804, ///< AHCI mode as 7804 ID (AMD driver)
+ SataIde2Ahci7804 ///< IDE->AHCI mode as 7804 ID (AMD driver)
+} SATA_CLASS;
+
+/// Configuration values for BLDCFG_FCH_GPP_LINK_CONFIG
+typedef enum {
+ PortA4 = 0, ///< 4:0:0:0
+ PortA2B2 = 2, ///< 2:2:0:0
+ PortA2B1C1 = 3, ///< 2:1:1:0
+ PortA1B1C1D1 = 4 ///< 1:1:1:1
+} GPP_LINKMODE;
+
+/// Configuration values for FchPowerFail
+typedef enum {
+ AlwaysOff = 0, ///< Always power off after power resumes
+ AlwaysOn = 1, ///< Always power on after power resumes
+ UsePrevious = 3, ///< Resume to same setting when power fails
+} POWER_FAIL;
+
+
+/// Configuration values for SATA Link Speed
+typedef enum {
+ Gen1 = 1, ///< SATA port GEN1 speed
+ Gen2 = 2, ///< SATA port GEN2 speed
+ Gen3 = 3, ///< SATA port GEN3 speed
+} SATA_SPEED;
+
+
+/// Configuration values for GPIO function
+typedef enum {
+ Function0 = 0, ///< GPIO Function 1
+ Function1 = 1, ///< GPIO Function 1
+ Function2 = 2, ///< GPIO Function 2
+ Function3 = 3, ///< GPIO Function 3
+} GPIO_FUN;
+
+
+/// Configuration values for GPIO_CFG
+typedef enum {
+ OwnedByEc = 1 << 0, ///< This bit can only be written by EC
+ OwnedByHost = 1 << 1, ///< This bit can only be written by host (BIOS)
+ Sticky = 1 << 2, ///< If set, [6:3] are sticky
+ PullUpB = 1 << 3, ///< 0: Pullup enable; 1: Pullup disabled
+ PullDown = 1 << 4, ///< 0: Pulldown disabled; 1: Pulldown enable
+ GpioOutEnB = 1 << 5, ///< 0: Output enable; 1: Output disable
+ GpioOut = 1 << 6, ///< Output state when GpioOutEnB is 0
+ GpioIn = 1 << 7, ///< This bit is read only - current pin state
+} CFG_BYTE;
+
+/// FCH GPIO CONTROL
+typedef struct {
+ IN UINT8 GpioPin; ///< Gpio Pin, valid range: 0-67, 128-150, 160-228
+ IN GPIO_FUN PinFunction; ///< Multi-function selection
+ IN CFG_BYTE CfgByte; ///< GPIO Register value
+} GPIO_CONTROL;
+
+///
+/// FCH SCI MAP CONTROL
+///
+typedef struct {
+ IN UINT8 InputPin; ///< Input Pin, valid range 0-63
+ IN UINT8 GpeMap; ///< Gpe Map, valid range 0-31
+} SCI_MAP_CONTROL;
+
+///
+/// FCH SATA PHY CONTROL
+///
+typedef struct {
+ IN BOOLEAN CommonPhy; ///< Common PHY or not
+ ///< @li <b>FALSE</b> - Only applied to specified port
+ ///< @li <b>TRUE</b> - Apply to all SATA ports
+ IN SATA_SPEED Gen; ///< SATA speed
+ IN UINT8 Port; ///< Port number, valid range: 0-7
+ IN UINT32 PhyData; ///< SATA PHY data, valid range: 0-0xFFFFFFFF
+} SATA_PHY_CONTROL;
+
+///
+/// FCH Component Data Structure in InitReset stage
+///
+typedef struct {
+ IN BOOLEAN UmiGen2; ///< Enable Gen2 data rate of UMI
+ ///< @li <b>FALSE</b> - Disable Gen2
+ ///< @li <b>TRUE</b> - Enable Gen2
+
+ IN BOOLEAN SataEnable; ///< SATA controller function
+ ///< @li <b>FALSE</b> - SATA controller is disabled
+ ///< @li <b>TRUE</b> - SATA controller is enabled
+
+ IN BOOLEAN IdeEnable; ///< SATA IDE controller mode enabled/disabled
+ ///< @li <b>FALSE</b> - IDE controller is disabled
+ ///< @li <b>TRUE</b> - IDE controller is enabled
+
+ IN BOOLEAN GppEnable; ///< Master switch of GPP function
+ ///< @li <b>FALSE</b> - GPP disabled
+ ///< @li <b>TRUE</b> - GPP enabled
+
+ IN BOOLEAN Xhci0Enable; ///< XHCI0 controller function
+ ///< @li <b>FALSE</b> - XHCI0 controller disabled
+ ///< @li <b>TRUE</b> - XHCI0 controller enabled
+
+ IN BOOLEAN Xhci1Enable; ///< XHCI1 controller function
+ ///< @li <b>FALSE</b> - XHCI1 controller disabled
+ ///< @li <b>TRUE</b> - XHCI1 controller enabled
+} FCH_RESET_INTERFACE;
+
+
+///
+/// FCH Component Data Structure from InitEnv stage
+///
+typedef struct {
+ IN SD_MODE SdConfig; ///< Secure Digital (SD) controller mode
+ IN UINT8 AzaliaController;
+
+ IN IR_CONFIG IrConfig; ///< Infrared (IR) Configuration
+ IN BOOLEAN UmiGen2; ///< Enable Gen2 data rate of UMI
+ ///< @li <b>FALSE</b> - Disable Gen2
+ ///< @li <b>TRUE</b> - Enable Gen2
+
+ IN SATA_CLASS SataClass; ///< SATA controller mode
+ IN BOOLEAN SataEnable; ///< SATA controller function
+ ///< @li <b>FALSE</b> - SATA controller is disabled
+ ///< @li <b>TRUE</b> - SATA controller is enabled
+
+ IN BOOLEAN IdeEnable; ///< SATA IDE controller mode enabled/disabled
+ ///< @li <b>FALSE</b> - IDE controller is disabled
+ ///< @li <b>TRUE</b> - IDE controller is enabled
+
+ IN BOOLEAN SataIdeMode; ///< Native mode of SATA IDE controller
+ ///< @li <b>FALSE</b> - Legacy IDE mode
+ ///< @li <b>TRUE</b> - Native IDE mode
+
+ IN BOOLEAN Ohci1Enable; ///< OHCI controller #1 Function
+ ///< @li <b>FALSE</b> - OHCI1 is disabled
+ ///< @li <b>TRUE</b> - OHCI1 is enabled
+
+ IN BOOLEAN Ohci2Enable; ///< OHCI controller #2 Function
+ ///< @li <b>FALSE</b> - OHCI2 is disabled
+ ///< @li <b>TRUE</b> - OHCI2 is enabled
+
+ IN BOOLEAN Ohci3Enable; ///< OHCI controller #3 Function
+ ///< @li <b>FALSE</b> - OHCI3 is disabled
+ ///< @li <b>TRUE</b> - OHCI3 is enabled
+
+ IN BOOLEAN Ohci4Enable; ///< OHCI controller #4 Function
+ ///< @li <b>FALSE</b> - OHCI4 is disabled
+ ///< @li <b>TRUE</b> - OHCI4 is enabled
+
+ IN BOOLEAN XhciSwitch; ///< XHCI controller Function
+ ///< @li <b>FALSE</b> - XHCI is disabled
+ ///< @li <b>TRUE</b> - XHCI is enabled
+
+ IN BOOLEAN GppEnable; ///< Master switch of GPP function
+ ///< @li <b>FALSE</b> - GPP disabled
+ ///< @li <b>TRUE</b> - GPP enabled
+
+ IN POWER_FAIL FchPowerFail; ///< FCH power failure option
+} FCH_INTERFACE;
+
+
+/*----------------------------------------------------------------------------
+ * CPU Feature related info
+ *----------------------------------------------------------------------------
+ */
+
+/// Build Configuration values for BLDCFG_PLATFORM_C1E_MODE
+typedef enum {
+ C1eModeDisabled = 0, ///< Disabled
+ C1eModeAuto = 1, ///< Auto mode enables the best C1e method for the
+ ///< currently installed processor
+ C1eModeHardware = 2, ///< Hardware method
+ C1eModeMsgBased = 3, ///< Message-based method
+ C1eModeSoftwareDeprecated = 4, ///< Deprecated software SMI method.
+ ///< Refer to "Addendum\Examples\C1eSMMHandler.asm" for
+ ///< example host BIOS SMM Handler implementation
+ C1eModeHardwareSoftwareDeprecated = 5, ///< Hardware or deprecated software SMI method
+ MaxC1eMode = 6 ///< Not a valid value, used for verifying input
+} PLATFORM_C1E_MODES;
+
+/// Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE
+typedef enum {
+ CStateModeDisabled = 0, ///< Disabled
+ CStateModeC6 = 1, ///< C6 State
+ MaxCStateMode = 2 ///< Not a valid value, used for verifying input
+} PLATFORM_CSTATE_MODES;
+
+/// Build Configuration values for BLDCFG_PLATFORM_CPB_MODE
+typedef enum {
+ CpbModeAuto = 0, ///< Auto
+ CpbModeDisabled = 1, ///< Disabled
+ MaxCpbMode = 2 ///< Not a valid value, used for verifying input
+} PLATFORM_CPB_MODES;
+
+/// Build Configuration values for BLDCFG_LOW_POWER_PSTATE_FOR_PROCHOT_MODE
+typedef enum {
+ LOW_POWER_PSTATE_FOR_PROCHOT_AUTO = 0, ///< Auto
+ LOW_POWER_PSTATE_FOR_PROCHOT_DISABLE = 1, ///< Disabled
+ MAX_LOW_POWER_PSTATE_FOR_PROCHOT_MODE = 2 ///< Not a valid value, used for verifying input
+} PLATFORM_LOW_POWER_PSTATE_MODES;
+
+/// Build Configuration values for BLDCFG_ACPI_PSTATES_PSD_POLICY
+#define PsdPolicyProcessorDefault 0 ///< PSD is dependent or independent per processor default
+#define PsdPolicyDependent 1 ///< PSD is forced dependent
+#define PsdPolicyIndependent 2 ///< PSD is forced independent
+#define PsdPolicyMax 3 ///< Not a valid value, used for verifying input
+
+/*----------------------------------------------------------------------------
+ * GNB PCIe configuration info
+ *----------------------------------------------------------------------------
+ */
+
+// Event definitions
+
+#define GNB_EVENT_INVALID_CONFIGURATION 0x20010000ul // User configuration invalid
+#define GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION 0x20010001ul // Requested lane allocation for PCIe port can not be supported
+#define GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION 0x20010002ul // Requested incorrect PCIe port device address
+#define GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION 0x20010003ul // Incorrect parameter in DDI link configuration
+#define GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION 0x20010004ul // Invalid with for PCIe port or DDI link
+#define GNB_EVENT_INVALID_LANES_CONFIGURATION 0x20010005ul // Lane double subscribe lanes
+#define GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION 0x20010006ul // Requested lane allocation for DDI link(s) can not be supported
+#define GNB_EVENT_LINK_TRAINING_FAIL 0x20020000ul // PCIe Link training fail
+#define GNB_EVENT_BROKEN_LANE_RECOVERY 0x20030000ul // Broken lane workaround applied to recover link training
+#define GNB_EVENT_GEN2_SUPPORT_RECOVERY 0x20040000ul // Scale back to GEN1 to recover link training
+
+
+#define DESCRIPTOR_TERMINATE_LIST 0x80000000ull
+#define DESCRIPTOR_IGNORE 0x40000000ull
+
+/// PCIe link initialization
+typedef enum {
+ EndpointDetect = 0, ///< Detect endpoint presence
+ EndpointNotPresent ///< Endpoint not present (or connected). Used in case there is alternative way to determine
+ ///< if device present on board or in slot. For example GPIO can be used to determine device presence.
+} PCIE_ENDPOINT_STATUS;
+
+
+/// PCIe port misc extended controls
+typedef struct {
+ IN UINT8 LinkComplianceMode :1; ///< Force port into compliance mode (device will not be trained, port output compliance pattern)
+ IN UINT8 LinkSafeMode :2; /**< Safe mode PCIe capability. (Parameter may limit PCIe speed requested through PCIe_PORT_DATA::LinkSpeedCapability)
+ * @li @b 0 - port can advertize muximum supported capability
+ * @li @b 1 - port limit advertized capability and speed to PCIe Gen1
+ */
+ IN UINT8 SbLink :1; /**< PCIe link type
+ * @li @b 0 - General purpose port
+ * @li @b 1 - Port connected to SB
+ */
+ IN UINT8 ClkPmSupport :1; /**< Clock Power Management Support
+ * @li @b 0 - Clock Power Management not configured
+ * @li @b 1 - Clock Power Management configured according to PCIe device capability
+ */
+} PCIe_PORT_MISC_CONTROL;
+
+/// The IO APIC Interrupt Mapping Info
+typedef struct {
+ IN UINT8 GroupMap; /**< Group mapping for slot or endpoint device (connected to PCIE port) interrupts .
+ * @li <b>0</b> - IGNORE THIS STRUCTURE AND USE RECOMMENDED SETTINGS
+ * @li <b>1</b> - mapped to Grp 0 (Interrupts 0..3 of IO APIC redirection table)
+ * @li <b>2</b> - mapped to Grp 1 (Interrupts 4..7 of IO APIC redirection table)
+ * @li ...
+ * @li <b>8</b> - mapped to Grp 7 (Interrupts 28..31 of IO APIC redirection table)
+ */
+ IN UINT8 Swizzle; /**< Swizzle interrupt in the Group.
+ * @li <b>0</b> - ABCD
+ * @li <b>1</b> - BCDA
+ * @li <b>2</b> - CDAB
+ * @li <b>3</b> - DABC
+ */
+ IN UINT8 BridgeInt; /**< IOAPIC redirection table entry for PCIE bridge interrupt
+ * @li <b>0</b> - Entry 0 of IO APIC redirection table
+ * @li <b>1</b> - Entry 1 of IO APIC redirection table
+ * @li ...
+ * @li <b>31</b> - Entry 31 of IO APIC redirection table
+ */
+} APIC_DEVICE_INFO;
+
+/// PCIe port configuration data
+typedef struct {
+ IN UINT8 PortPresent; ///< Enable PCIe port for initialization.
+ IN UINT8 ChannelType; /**< Channel type.
+ * @li @b 0 - "lowLoss",
+ * @li @b 1 - "highLoss",
+ * @li @b 2 - "mob0db",
+ * @li @b 3 - "mob3db",
+ * @li @b 4 - "extnd6db"
+ * @li @b 5 - "extnd8db"
+ */
+ IN UINT8 DeviceNumber; /**< PCI Device number for port.
+ * @li @b 0 - Native port device number
+ * @li @b N - Port device number (See available configurations @ref F12LaneConfigurations "Family 0x12", @ref F14ONLaneConfigurations "Family 0x14(ON)")
+ */
+ IN UINT8 FunctionNumber; ///< Reserved for future use
+ IN UINT8 LinkSpeedCapability; /**< PCIe link speed/
+ * @li @b 0 - Maximum supported by silicon
+ * @li @b 1 - Gen1
+ * @li @b 2 - Gen2
+ * @li @b 3 - Gen3
+ */
+ IN UINT8 LinkAspm; /**< ASPM control. (see AgesaPcieLinkAspm for additional option to control ASPM)
+ * @li @b 0 - Disabled
+ * @li @b 1 - L0s only
+ * @li @b 2 - L1 only
+ * @li @b 3 - L0s and L1
+ */
+ IN UINT8 LinkHotplug; /**< Hotplug control.
+ * @li @b 0 - Disabled
+ * @li @b 1 - Basic
+ * @li @b 2 - Server
+ * @li @b 3 - Enhanced
+ */
+ IN UINT8 ResetId; /**< Arbitrary number greater than 0 assigned by platform firmware for GPIO
+ * identification which control reset for given port.
+ * Each port with unique GPIO should have unique ResetId assigned.
+ * All ports use same GPIO to control reset should have same ResetId assigned.
+ * see AgesaPcieSlotResetContol.
+ */
+ IN PCIe_PORT_MISC_CONTROL MiscControls; ///< Misc extended controls
+ IN APIC_DEVICE_INFO ApicDeviceInfo; ///< IOAPIC device programming info
+ IN PCIE_ENDPOINT_STATUS EndpointStatus; ///< PCIe endpoint (device connected to PCIe port) status
+} PCIe_PORT_DATA;
+
+/// DDI channel lane mapping
+typedef struct { ///< Structure that discribe lane mapping
+ IN UINT8 Lane0 :2; /**< Lane 0 mapping
+ * @li @b 0 - Map to lane 0
+ * @li @b 1 - Map to lane 1
+ * @li @b 2 - Map to lane 2
+ * @li @b 2 - Map to lane 3
+ */
+ IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping")
+ IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping")
+ IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping")
+} CHANNEL_MAPPING; ///< Lane mapping
+
+/// Common Channel Mapping
+typedef union {
+ IN UINT8 ChannelMappingValue; ///< Raw lane mapping
+ IN CHANNEL_MAPPING ChannelMapping; ///< Channel mapping
+} CONN_CHANNEL_MAPPING;
+
+/// DDI Configuration data
+typedef struct {
+ IN UINT8 ConnectorType; /**< Display Connector Type
+ * @li @b 0 - DP
+ * @li @b 1 - eDP
+ * @li @b 2 - Single Link DVI-D
+ * @li @b 3 - Dual Link DVI-D
+ * @li @b 4 - HDMI
+ * @li @b 5 - DP-to-VGA
+ * @li @b 6 - DP-to-LVDS
+ * @li @b 8 - Single Link DVI-I
+ * @li @b 9 - Native CRT (Family 0x14)
+ * @li @b 10 - Native LVDS (Family 0x14)
+ * @li @b 11 - Auto detect LCD panel connector type. VBIOS is able to auto detect the LVDS connector type: native LVDS, eDP or DP-to-LVDS
+ * The auto detection method only support panel with EDID.
+ */
+ IN UINT8 AuxIndex; /**< Indicates which AUX or DDC Line is used
+ * @li @b 0 - AUX1
+ * @li @b 1 - AUX2
+ * @li @b 2 - AUX3
+ * @li @b 3 - AUX4
+ * @li @b 4 - AUX5
+ * @li @b 5 - AUX6
+ */
+ IN UINT8 HdpIndex; /**< Indicates which HDP pin is used
+ * @li @b 0 - HDP1
+ * @li @b 1 - HDP2
+ * @li @b 2 - HDP3
+ * @li @b 3 - HDP4
+ * @li @b 4 - HDP5
+ * @li @b 5 - HDP6
+ */
+ IN CONN_CHANNEL_MAPPING Mapping[2]; /**< Set specific mapping of lanes to connector pins
+ * @li Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane
+ * @li Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only applicable for Dual DDI link)
+ * if Mapping[x] set to 0 than default mapping assumed
+ */
+ IN UINT8 LanePnInversionMask; /**< Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port.
+ * @li 0 - Do not invert (default)
+ * @li 1 - Invert P and N on this lane
+ */
+ IN UINT8 Flags; /**< Capabilities flags
+ * @li Flags bit[0] DDI_DATA_FLAGS_DP1_1_ONLY Selects downgrade PHY link to DP1.1
+ * @li Flags bit[7:1] Reserved
+ */
+} PCIe_DDI_DATA;
+
+/// Engine Configuration
+typedef struct {
+ IN UINT8 EngineType; /**< Engine type
+ * @li @b 0 - Ignore engine configuration
+ * @li @b 1 - PCIe port
+ * @li @b 2 - DDI
+ */
+ IN UINT16 StartLane; /**< Start Lane ID (in reversed configuration StartLane > EndLane)
+ * See lane description for @ref F12PcieLaneDescription "Family 0x12"
+ * @ref F14ONPcieLaneDescription "Family 0x14(ON)".
+ * See lane configurations for @ref F12LaneConfigurations "Family 0x12"
+ * @ref F14ONLaneConfigurations "Family 0x14(ON)".
+ */
+ IN UINT16 EndLane; /**< End lane ID (in reversed configuration StartLane > EndLane)
+ * See lane description for @ref F12PcieLaneDescription "Family 0x12",
+ * @ref F14ONPcieLaneDescription "Family 0x14(ON)".
+ * See lane configurations for @ref F12LaneConfigurations "Family 0x12"
+ * @ref F14ONLaneConfigurations "Family 0x14(ON)".
+ */
+
+} PCIe_ENGINE_DATA;
+
+/// PCIe port descriptor
+typedef struct {
+ IN UINT32 Flags; /**< Descriptor flags
+ * @li @b Bit31 - last descriptor in complex
+ */
+ IN PCIe_ENGINE_DATA EngineData; ///< Engine data
+ IN PCIe_PORT_DATA Port; ///< PCIe port specific configuration info
+} PCIe_PORT_DESCRIPTOR;
+
+/// DDI descriptor
+typedef struct {
+ IN UINT32 Flags; /**< Descriptor flags
+ * @li @b Bit31 - last descriptor in complex
+ */
+ IN PCIe_ENGINE_DATA EngineData; ///< Engine data
+ IN PCIe_DDI_DATA Ddi; ///< DDI port specific configuration info
+} PCIe_DDI_DESCRIPTOR;
+
+/// PCIe Complex descriptor
+typedef struct {
+ IN UINT32 Flags; /**< Descriptor flags
+ * @li @b Bit31 - last descriptor in topology
+ */
+ IN UINT32 SocketId; ///< Socket Id
+ IN PCIe_PORT_DESCRIPTOR *PciePortList; ///< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST).
+ IN PCIe_DDI_DESCRIPTOR *DdiLinkList; ///< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST).
+ IN VOID *Reserved; ///< Reserved for future use
+} PCIe_COMPLEX_DESCRIPTOR;
+
+/// Action to control PCIe slot reset
+typedef enum {
+ AssertSlotReset, ///< Assert slot reset
+ DeassertSlotReset ///< Deassert slot reset
+} PCIE_RESET_CONTROL;
+
+///Slot Reset Info
+typedef struct {
+ IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN UINT8 ResetId; ///< Slot reset ID as specified in PCIe_PORT_DESCRIPTOR
+ IN UINT8 ResetControl; ///< Reset control as in PCIE_RESET_CONTROL
+} PCIe_SLOT_RESET_INFO;
+
+#define GFX_VBIOS_IMAGE_FLAG_SPECIAL_POST 0x1
+
+///VBIOS image info
+typedef struct {
+ IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ OUT VOID *ImagePtr; ///< Pointer to VBIOS image
+ IN PCI_ADDR GfxPciAddress; ///< PCI address of integrated graphics controller
+ IN UINT32 Flags; ///< BIT[0] - special repost requred
+} GFX_VBIOS_IMAGE_INFO;
+
+/// Engine descriptor type
+typedef enum {
+ PcieUnusedEngine = 0, ///< Unused descriptor
+ PciePortEngine = 1, ///< PCIe port
+ PcieDdiEngine = 2, ///< DDI
+ MaxPcieEngine ///< Max engine type for boundary check.
+} PCIE_ENGINE_TYPE;
+
+/// PCIe link capability/speed
+typedef enum {
+ PcieGenMaxSupported, ///< Maximum supported
+ PcieGen1 = 1, ///< Gen1
+ PcieGen2, ///< Gen2
+ PcieGen3, ///< Gen3
+ MaxPcieGen ///< Max Gen for boundary check
+} PCIE_LINK_SPEED_CAP;
+
+/// PCIe PSPP Power policy
+typedef enum {
+ PsppDisabled, ///< PSPP disabled
+ PsppPerformance = 1, ///< Performance
+ PsppBalanceHigh, ///< Balance-High
+ PsppBalanceLow, ///< Balance-Low
+ PsppPowerSaving, ///< Power Saving
+ MaxPspp ///< Max Pspp for boundary check
+} PCIE_PSPP_POLICY;
+
+/// DDI display connector type
+typedef enum {
+ ConnectorTypeDP, ///< DP
+ ConnectorTypeEDP, ///< eDP
+ ConnectorTypeSingleLinkDVI, ///< Single Link DVI-D
+ ConnectorTypeDualLinkDVI, ///< Dual Link DVI-D
+ ConnectorTypeHDMI, ///< HDMI
+ ConnectorTypeDpToVga, ///< DP-to-VGA
+ ConnectorTypeDpToLvds, ///< DP-to-LVDS
+ ConnectorTypeStub,
+ ConnectorTypeSingleLinkDviI, ///< Single Link DVI-I
+ ConnectorTypeCrt, ///< CRT (VGA)
+ ConnectorTypeLvds, ///< LVDS
+ ConnectorTypeEDPToLvds, ///< 3rd party common eDP-to-LVDS translator chip without AMD SW init
+ ConnectorTypeEDPToLvdsSwInit, ///< 3rd party eDP-to-LVDS translator which requires AMD SW init
+ ConnectorTypeAutoDetect, ///< VBIOS auto detect connector type (native LVDS, eDP or DP-to-LVDS)
+ MaxConnectorType ///< Not valid value, used to verify input
+} PCIE_CONNECTOR_TYPE;
+
+/// PCIe link channel type
+typedef enum {
+ ChannelTypeLowLoss, ///< Low Loss
+ ChannelTypeHighLoss, ///< High Loss
+ ChannelTypeMob0db, ///< Mobile 0dB
+ ChannelTypeMob3db, ///< Mobile 3dB
+ ChannelTypeExt6db, ///< Extended 6dB
+ ChannelTypeExt8db, ///< Extended 8dB
+ MaxChannelType ///< Not valid value, used to verify input
+} PCIE_CHANNEL_TYPE;
+
+/// PCIe link ASPM
+typedef enum {
+ AspmDisabled, ///< Disabled
+ AspmL0s, ///< PCIe L0s link state
+ AspmL1, ///< PCIe L1 link state
+ AspmL0sL1, ///< PCIe L0s & L1 link state
+ MaxAspm ///< Not valid value, used to verify input
+} PCIE_ASPM_TYPE;
+
+/// PCIe link hotplug support
+typedef enum {
+ HotplugDisabled, ///< Hotplug disable
+ HotplugBasic, ///< Basic Hotplug
+ HotplugServer, ///< Server Hotplug
+ HotplugEnhanced, ///< Enhanced
+ HotplugInboard, ///< Inboard
+ MaxHotplug ///< Not valid value, used to verify input
+} PCIE_HOTPLUG_TYPE;
+
+/// PCIe link initialization
+typedef enum {
+ PortDisabled, ///< Disable
+ PortEnabled ///< Enable
+} PCIE_PORT_ENABLE;
+
+/// PCIe ACS capability - Access Control Services
+typedef enum {
+ PcieAcsDisabled, ///< Disabled
+ PcieAcsEnabled, ///< Enabled
+} PCIE_ACS_CAP;
+
+/// PCIe ClkPmSupport initialization
+typedef enum {
+ ClkPmSupportDisabled, ///< Disable
+ ClkPmSupportEnabled ///< Enable
+} CLKPM_SUPPORT_ENABLE;
+
+/// DDI Aux channel
+typedef enum {
+ Aux1, ///< Aux1
+ Aux2, ///< Aux2
+ Aux3, ///< Aux3
+ Aux4, ///< Aux4
+ Aux5, ///< Aux5
+ Aux6, ///< Aux6
+ MaxAux ///< Not valid value, used to verify input
+} PCIE_AUX_TYPE;
+
+/// DDI Hdp Index
+typedef enum {
+ Hdp1, ///< Hdp1
+ Hdp2, ///< Hdp2
+ Hdp3, ///< Hdp3
+ Hdp4, ///< Hdp4
+ Hdp5, ///< Hdp5
+ Hdp6, ///< Hdp6
+ MaxHdp ///< Not valid value, used to verify input
+} PCIE_HDP_TYPE;
+
+/// PCIe_DDI_DATA.Flags definitions
+#define DDI_DATA_FLAGS_DP1_1_ONLY 0x01 ///< BIT[0] Selects downgrade PHY link to DP1.1
+#define EXT_DISPLAY_PATH_CAPS_DP_FIXED_VS_EN 0x02 ///< BIT[1] VBIOS will always output fixed voltage swing during DP link training
+/// DP receiver definitions with fixed voltage swing
+typedef enum {
+ DP_VS_0_4V_0DB, ///< 0x00
+ DP_VS_0_6V_0DB, ///< 0x01
+ DP_VS_0_8V_0DB, ///< 0x02
+ DP_VS_1_2V_0DB, ///< 0x03
+ DP_VS_0_4V_3_5DB = 0x8, ///< 0x08
+ DP_VS_0_6V_3_5DB, ///< 0x09
+ DP_VS_0_8V_3_5DB, ///< 0x0a
+ DP_VS_0_4V_6DB = 0x10, ///< 0x10
+ DP_VS_0_6V_6DB, ///< 0x11
+ DP_VS_0_4V_9_5DB = 0x18 ///< 0x18
+} DP_FIXED_VOLT_SWING_TYPE;
+
+// Macro for statically initialization of various structures
+#define PCIE_ENGINE_DATA_INITIALIZER(mType, mStartLane, mEndLane) {mType, mStartLane, mEndLane}
+#define PCIE_PORT_DATA_INITIALIZER(mPortPresent, mChannelType, mDevAddress, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId) \
+{mPortPresent, mChannelType, mDevAddress, 0, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, 0}, {0, 0, 0}, EndpointDetect}
+#define PCIE_PORT_DATA_INITIALIZER_V2(mPortPresent, mChannelType, mDevAddress, mDevFunction, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId, mClkPmSupport) \
+{mPortPresent, mChannelType, mDevAddress, mDevFunction, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, mClkPmSupport}, {0, 0, 0}, EndpointDetect}
+#define PCIE_DDI_DATA_INITIALIZER(mConnectorType, mAuxIndex, mHpdIndex ) \
+{mConnectorType, mAuxIndex, mHpdIndex, {{0}, {0}}, 0, 0}
+#define PCIE_DDI_DATA_INITIALIZER_V1(mConnectorType, mAuxIndex, mHpdIndex, mMapping0, mMapping1, mPNInversion) \
+{mConnectorType, mAuxIndex, mHpdIndex, {mMapping0, mMapping1}, mPNInversion, 0}
+#define PCIE_DDI_DATA_INITIALIZER_V2(mConnectorType, mAuxIndex, mHpdIndex, mMapping0, mMapping1, mPNInversion, mFlags) \
+{mConnectorType, mAuxIndex, mHpdIndex, {mMapping0, mMapping1}, mPNInversion, mFlags}
+
+///IOMMU requestor ID
+typedef struct {
+ IN UINT16 Bus :8; ///< Bus
+ IN UINT16 Device :5; ///< Device
+ IN UINT16 Function :3; ///< Function
+} IOMMU_REQUESTOR_ID;
+
+/// IVMD exclusion range descriptor
+typedef struct {
+ IN UINT32 Flags; /**< Descriptor flags
+ * @li @b Flags[31] - Terminate descriptor array.
+ * @li @b Flags[30] - Ignore descriptor.
+ */
+ IN IOMMU_REQUESTOR_ID RequestorIdStart; ///< Requestor ID start
+ IN IOMMU_REQUESTOR_ID RequestorIdEnd; ///< Requestor ID end (use same as start for single ID)
+ IN UINT64 RangeBaseAddress; ///< Phisical base address of exclusion range
+ IN UINT64 RangeLength; ///< Length of exclusion range in bytes
+} IOMMU_EXCLUSION_RANGE_DESCRIPTOR;
+
+/*----------------------------------------------------------------------------
+ * GNB configuration info
+ *----------------------------------------------------------------------------
+ */
+
+/// LVDS Misc Control Field
+typedef struct {
+ IN UINT8 FpdiMode:1; ///< This item configures LVDS 888bit panel mode
+ ///< @li FALSE = LVDS 888 panel in LDI mode
+ ///< @li TRUE = LVDS 888 panel in FPDI mode
+ ///< @BldCfgItem{BLDCFG_LVDS_MISC_888_FPDI_MODE}
+ IN UINT8 DlChSwap:1; ///< This item configures LVDS panel lower and upper link mapping
+ ///< @li FALSE = Lower link and upper link not swap
+ ///< @li TRUE = Lower link and upper link are swapped
+ ///< @BldCfgItem{BLDCFG_LVDS_MISC_DL_CH_SWAP}
+ IN UINT8 VsyncActiveLow:1; ///< This item configures polarity of frame pulse encoded in lvds data stream
+ ///< @li FALSE = Active high Frame Pulse/Vsync
+ ///< @li TRUE = Active low Frame Pulse/Vsync
+ ///< @BldCfgItem{BLDCFG_LVDS_MISC_VSYNC_ACTIVE_LOW}
+ IN UINT8 HsyncActiveLow:1; ///< This item configures polarity of line pulse encoded in lvds data
+ ///< @li FALSE = Active high Line Pulse
+ ///< @li TRUE = Active low Line Pulse / Hsync
+ ///< @BldCfgItem{BLDCFG_LVDS_MISC_HSYNC_ACTIVE_LOW}
+ IN UINT8 BLONActiveLow:1; ///< This item configures polarity of signal sent to digital BLON output pin
+ ///< @li FALSE = Not inverted(active high)
+ ///< @li TRUE = Inverted (active low)
+ ///< @BldCfgItem{BLDCFG_LVDS_MISC_BLON_ACTIVE_LOW}
+ IN UINT8 LvdsVoltOverwriteEn:1; ///< This item configures polarity of DP-to-LVDS output voltage overwrite
+ ///< @li FALSE = DP-to-LVDS output voltage overwrite disable, use VBIOS default setting.
+ ///< @li TRUE = Use ucLVDSVolAdjust value to program register LVDS_CTRL_4
+ ///< @BldCfgItem{BLDCFG_LVDS_MISC_VOLT_OVERWRITE_ENABLE}
+ IN UINT8 Reserved:2; ///< Reserved
+} LVDS_MISC_CONTROL_FIELD;
+
+/// LVDS Misc Control
+typedef union _LVDS_MISC_CONTROL {
+ IN LVDS_MISC_CONTROL_FIELD Field; ///< LVDS_MISC_CONTROL_FIELD
+ IN UINT8 Value; ///< LVDS Misc Control Value
+} LVDS_MISC_CONTROL;
+
+/// Display Misc Control Field
+typedef struct {
+ IN UINT8 Reserved1:3; ///< Reserved
+ IN UINT8 VbiosFastBootEn:1; ///< This item configures VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open.
+ ///< @li FALSE = VBIOS fast boot is disable.
+ ///< @li TRUE = VBIOS fast boot is enable.
+ ///< @BldCfgItem{BLDCFG_DISPLAY_MISC_VBIOS_FAST_BOOT_ENABLE}
+ IN UINT8 Reserved2:4; ///< Reserved
+} DISPLAY_MISC_CONTROL_FIELD;
+
+/// LVDS Misc Control
+typedef union _DISPLAY_MISC_CONTROL {
+ IN DISPLAY_MISC_CONTROL_FIELD Field; ///< DISPLAY_MISC_CONTROL_FIELD
+ IN UINT8 Value; ///< Display Misc Control Value
+} DISPLAY_MISC_CONTROL;
+
+/// POST Configuration settings for GNB.
+typedef struct {
+ IN UINT8 IgpuEnableDisablePolicy; ///< This item defines the iGPU Enable/Disable policy
+ ///< @li 0 = Auto - use existing default -
+ ///< @li 1 = Disable iGPU if any PCIe/PCI graphics card present
+ ///< @BldCfgItem{BLDCFG_IGPU_ENABLE_DISABLE_POLICY}
+} GNB_POST_CONFIGURATION;
+
+/// iGPU Enable/Disable Policy values
+#define IGPU_DISABLE_AUTO 0 ///< Auto setting - disable iGPU if ANY PCI graphics or non-AMD PCIe graphics
+#define IGPU_DISABLE_ANY_PCIE 1 ///< Disable iGPU if any PCI or PCIE graphics card is present
+
+/// ENV Configuration settings for GNB.
+typedef struct {
+ IN UINT8 Gnb3dStereoPinIndex; ///< 3D Stereo Pin ID.
+ ///< @li 0 = Stereo 3D is disabled (default).
+ ///< @li 1 = Use processor pin HPD1.
+ ///< @li 2 = Use processor pin HPD2
+ ///< @li 3 = Use processor pin HPD3
+ ///< @li 4 = Use processor pin HPD4
+ ///< @li 5 = Use processor pin HPD5
+ ///< @li 6 = Use processor pin HPD6
+ ///< @BldCfgItem{BLDCFG_STEREO_3D_PINOUT}
+ IN BOOLEAN IommuSupport; ///< IOMMU support.
+ ///< @li FALSE = Disabled. Disable and hide IOMMU device.
+ ///< @li TRUE = Initialize IOMMU subsystem. Generate ACPI IVRS table.
+ ///< BldCfgItem{BLDCFG_IOMMU_SUPPORT}
+ IN UINT16 LvdsSpreadSpectrum; ///< Spread spectrum value in 0.01 %
+ ///< BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM}
+ IN UINT16 LvdsSpreadSpectrumRate; ///< Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz
+ ///< BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE}
+ IN UINT8 LvdsPowerOnSeqDigonToDe; ///< This item configures panel initialization timing.
+ ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE}
+ IN UINT8 LvdsPowerOnSeqDeToVaryBl; ///< This item configures panel initialization timing.
+ ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL}
+ IN UINT8 LvdsPowerOnSeqDeToDigon; ///< This item configures panel initialization timing.
+ ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON}
+ IN UINT8 LvdsPowerOnSeqVaryBlToDe; ///< This item configures panel initialization timing.
+ ///< @BldCfgItem{BLDCFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE}
+ IN UINT8 LvdsPowerOnSeqOnToOffDelay; ///< This item configures panel initialization timing.
+ ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY}
+ IN UINT8 LvdsPowerOnSeqVaryBlToBlon; ///< This item configures panel initialization timing.
+ ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON}
+ IN UINT8 LvdsPowerOnSeqBlonToVaryBl; ///< This item configures panel initialization timing.
+ ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL}
+ IN UINT16 LvdsMaxPixelClockFreq; ///< This item configures the maximum pixel clock frequency supported.
+ ///< @BldCfgItem{BLDCFG_LVDS_MAX_PIXEL_CLOCK_FREQ}
+ IN UINT32 LcdBitDepthControlValue; ///< This item configures the LCD bit depth control settings.
+ ///< @BldCfgItem{BLDCFG_LCD_BIT_DEPTH_CONTROL_VALUE}
+ IN UINT8 Lvds24bbpPanelMode; ///< This item configures the LVDS 24 BBP mode.
+ ///< @BldCfgItem{BLDCFG_LVDS_24BBP_PANEL_MODE}
+ IN LVDS_MISC_CONTROL LvdsMiscControl;///< This item configures LVDS swap/Hsync/Vsync/BLON
+ IN UINT16 PcieRefClkSpreadSpectrum; ///< Spread spectrum value in 0.01 %
+ ///< @BldCfgItem{BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM}
+ IN BOOLEAN GnbRemoteDisplaySupport; ///< This item enables Wireless Display Support
+ ///< @li TRUE = Enable Wireless Display Support
+ ///< @li FALSE = Disable Wireless Display Support
+ ///< @BldCfgItem{BLDCFG_REMOTE_DISPLAY_SUPPORT}
+ IN UINT8 LvdsMiscVoltAdjustment; ///< Register LVDS_CTRL_4 to adjust LVDS output voltage
+ ///< @BldCfgItem{BLDCFG_LVDS_MISC_VOL_ADJUSTMENT}
+ IN DISPLAY_MISC_CONTROL DisplayMiscControl;///< This item configures display misc control
+ IN DP_FIXED_VOLT_SWING_TYPE DpFixedVoltSwingType;///< To indicate fixed voltage swing value
+ ///< @BldCfgItem{BLDCFG_DP_FIXED_VOLT_SWING}
+} GNB_ENV_CONFIGURATION;
+
+/// Configuration settings for GNB.
+typedef struct {
+ IN UINT8 iGpuVgaMode; ///< VGA resources decoding configuration for iGPU
+ ///< @li 0 = iGPU decode all VGA resources (must be primary VGA adapter)
+ ///< @li 1 = iGPU will not decode any VGA resources (must be secondary graphics adapter)
+ IN UINT8 PcieAcsCapability; ///< Pcie ACS Capability support
+ ///< @li 0 = Disabled
+ ///< @li 1 = Enabled
+ IN UINT64 GnbIoapicAddress; ///< GNB IOAPIC Base Address(NULL if platform configured)
+ ///< @BldCfgItem{BLDCFG_GNB_IOAPIC_ADDRESS}
+} GNB_MID_CONFIGURATION;
+
+/// GNB configuration info
+typedef struct {
+ IN PCIe_COMPLEX_DESCRIPTOR *PcieComplexList; /**< Pointer to array of structures describe PCIe topology on each processor package or NULL.
+ * Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST
+ * Example of topology definition for single socket system:
+ * @code
+ * PCIe_PORT_DESCRIPTOR PortList [] = {
+ * // Initialize Port descriptor (PCIe port, Lanes 8:15, PCI Device Number 2, ...)
+ * {
+ * 0, //Descriptor flags
+ * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 15),
+ * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0)
+ * },
+ * // Initialize Port descriptor (PCIe port, Lanes 16:19, PCI Device Number 3, ...)
+ * {
+ * 0, //Descriptor flags
+ * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 16, 19),
+ * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 3, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0)
+ * },
+ * // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...)
+ * {
+ * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
+ * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4),
+ * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0)
+ * }
+ * };
+ * PCIe_PORT_DESCRIPTOR DdiList [] = {
+ * // Initialize Ddi descriptor (DDI interface Lanes 24:27, Display Port Connector, ...)
+ * {
+ * 0, //Descriptor flags
+ * PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 24, 27),
+ * PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1, 0)
+ * },
+ * // Initialize Ddi descriptor (DDI interface Lanes 28:31, HDMI, ...)
+ * {
+ * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
+ * PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 28, 31),
+ * PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2, 0)
+ * }
+ * };
+ * PCIe_COMPLEX_DESCRIPTOR PlatformTopology = {
+ * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate complexes list
+ * 0, //Socket ID
+ * &PortList[0],
+ * &DdiList[0],
+ * }
+ * @endcode
+ */
+ IN UINT8 PsppPolicy; /**< PSPP (PCIe Speed Power Policy)
+ * @li @b 0 - Disabled
+ * @li @b 1 - Performance
+ * @li @b 2 - Balance-High
+ * @li @b 3 - Balance-Low
+ * @li @b 4 - Power Saving
+ */
+
+} GNB_CONFIGURATION;
+
+/// Late Configuration settings for GNB.
+typedef struct {
+ IN BOOLEAN DockedTdpHeadroom; ///< Docked TDP headroom
+ ///< @li TRUE = Enable docked TDP headroom
+ ///< @li FALSE = Disable docked TDP headroom
+ ///< @BldCfgItem{BLDCFG_DOCKED_TDP_HEADROOM}
+} GNB_LATE_CONFIGURATION;
+
+//
+// MEMORY-SPECIFIC DATA STRUCTURES
+//
+//
+//
+//
+// AGESA MAXIMIUM VALUES
+//
+// These Max values are used to define array sizes and associated loop
+// counts in the code. They reflect the maximum values that AGESA
+// currently supports and does not necessarily reflect the hardware
+// capabilities of configuration.
+//
+
+#define MAX_SOCKETS_SUPPORTED 8 ///< Max number of sockets in system
+#define MAX_CHANNELS_PER_SOCKET 4 ///< Max Channels per sockets
+#define MAX_DIMMS_PER_CHANNEL 4 ///< Max DIMMs on a memory channel (independent of platform)
+#define NUMBER_OF_DELAY_TABLES 9 ///< Number of tables defined in CH_DEF_STRUCT.
+ ///< Eg: UINT16 *RcvEnDlys;
+ ///< UINT8 *WrDqsDlys;
+ ///< UINT8 *RdDqsDlys;
+ ///< UINT8 *WrDatDlys;
+ ///< UINT8 *RdDqsMinDlys;
+ ///< UINT8 *RdDqsMaxDlys;
+ ///< UINT8 *WrDatMinDlys;
+ ///< UINT8 *WrDatMaxDlys;
+#define NUMBER_OF_FAILURE_MASK_TABLES 1 ///< Number of failure mask tables
+
+#define MAX_PLATFORM_TYPES 16 ///< Platform types per system
+
+#define MCT_TRNG_KEEPOUT_START 0x00004000ul ///< base [39:8]
+#define MCT_TRNG_KEEPOUT_END 0x00007FFFul ///< base [39:8]
+#define DATAEYE_VREF_RANGE 31 ///< Number of VREF steps in Data Eye Bitmap
+
+#define UMA_ATTRIBUTE_INTERLEAVE 0x80000000ul ///< Uma Region is interleaved
+#define UMA_ATTRIBUTE_ON_DCT0 0x40000000ul ///< UMA resides on memory that belongs to DCT0
+#define UMA_ATTRIBUTE_ON_DCT1 0x20000000ul ///< UMA resides on memory that belongs to DCT1
+#define UMA_ATTRIBUTE_ON_DCT2 0x10000000ul ///< UMA resides on memory that belongs to DCT2
+#define UMA_ATTRIBUTE_ON_DCT3 0x08000000ul ///< UMA resides on memory that belongs to DCT3
+
+typedef UINT8 PSO_TABLE; ///< Platform Configuration Table
+
+// AGESA DEFINITIONS
+//
+// Many of these are derived from the platform and hardware specific definitions
+
+/// EccSymbolSize override value
+#define ECCSYMBOLSIZE_USE_BKDG 0 ///< Use BKDG Recommended Value
+#define ECCSYMBOLSIZE_FORCE_X4 4 ///< Force to x4
+#define ECCSYMBOLSIZE_FORCE_X8 8 ///< Force to x8
+/// CPU Package Type
+#define PT_L1 0 ///< L1 Package type
+#define PT_M2 1 ///< AM Package type
+#define PT_S1 2 ///< S1 Package type
+
+/// Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT
+#define DDR400_FREQUENCY 200 ///< DDR 400
+#define DDR533_FREQUENCY 266 ///< DDR 533
+#define DDR667_FREQUENCY 333 ///< DDR 667
+#define DDR800_FREQUENCY 400 ///< DDR 800
+#define DDR1066_FREQUENCY 533 ///< DDR 1066
+#define DDR1333_FREQUENCY 667 ///< DDR 1333
+#define DDR1600_FREQUENCY 800 ///< DDR 1600
+#define DDR1866_FREQUENCY 933 ///< DDR 1866
+#define DDR2100_FREQUENCY 1050 ///< DDR 2100
+#define DDR2133_FREQUENCY 1066 ///< DDR 2133
+#define DDR2400_FREQUENCY 1200 ///< DDR 2400
+#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency
+
+/// Build Configuration values for BLDCFG_TIMING_MODE_SELECT
+#define TIMING_MODE_AUTO 0 ///< Use best rate possible
+#define TIMING_MODE_LIMITED 1 ///< Set user top limit
+#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed
+
+/// Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE
+#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM
+#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM
+
+/// Build Configuration values for BLDCFG_POWER_DOWN_MODE
+#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode
+#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode
+#define POWER_DOWN_MODE_AUTO 2 ///< AGESA to select power down mode
+
+/// Structures use to pass system Logical CPU-ID
+typedef struct {
+ IN OUT UINT64 Family; ///< Indicates logical ID Family
+ IN OUT UINT64 Revision; ///< Indicates logical ID Family
+} CPU_LOGICAL_ID;
+
+/// Structures use to report AMP status
+typedef struct {
+ OUT BOOLEAN AmpVoltageValid; ///< Indicates if Amp voltage is valid
+ OUT BOOLEAN AmpSupportDetectedButNotEnabled; ///< Indicates if Amp support is detected but not enabled
+ OUT BOOLEAN AmpSelectedButNotEnabled; ///< Indicates if Amp is selected but not enabled
+} AMP_STATUS;
+
+/// Normalized Critical Composite Data Eye
+/// Bit 15 represents trained eye Center
+/// Bit 0 represents eye center -15 delay steps
+/// Bit 31 represents eye center +16 delay steps
+/// Offset 0 represents +15 Vref Steps
+/// Offset 31 represents -15 Vref Steps
+typedef UINT32 COMPOSITE_DATAEYE[DATAEYE_VREF_RANGE];
+
+/// Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE
+typedef enum {
+ AMD_PLATFORM_SERVER = 0x8000, ///< Server
+ AMD_PLATFORM_DESKTOP = 0x10000, ///< Desktop
+ AMD_PLATFORM_MOBILE = 0x20000, ///< Mobile
+} AMD_PLATFORM_TYPE;
+
+/// Dram technology type
+typedef enum {
+ DDR2_TECHNOLOGY, ///< DDR2 technology
+ DDR3_TECHNOLOGY, ///< DDR3 technology
+ STUB_TECHNOLOGY, ///<
+ UNSUPPORTED_TECHNOLOGY, ///< Unsupported technology
+} TECHNOLOGY_TYPE;
+
+/// Low voltage support
+typedef enum {
+ VOLT_INITIAL, ///< Initial value for VDDIO
+ VOLT1_5, ///< 1.5 Volt
+ VOLT1_35, ///< 1.35 Volt
+ VOLT1_25, ///< 1.25 Volt
+ VOLT_UNSUPPORTED = 0xFF ///< No common voltage found
+} DIMM_VOLTAGE;
+
+/// AMP voltage support
+typedef enum {
+ AMP_VOLT_RSVD, ///< Reserved
+ AMP_VOLT1_5, ///< 1.5 Volt
+ AMP_VOLT1_55, ///< 1.55 Volt
+ AMP_VOLT1_6, ///< 1.6 Volt
+ AMP_VOLT1_65, ///< 1.65 Volt
+ AMP_VOLT1_7, ///< 1.7 Volt
+ AMP_VOLT1_75, ///< 1.75 Volt
+ AMP_VOLT1_8, ///< 1.8 Volt
+ AMP_VOLT1_85, ///< 1.85 Volt
+ AMP_VOLT1_9, ///< 1.9 Volt
+ AMP_VOLT1_45 = 0x10, ///< 1.45 Volt
+ AMP_VOLT1_4 = 0x20, ///< 1.4 Volt
+ AMP_VOLT1_35 = 0x30, ///< 1.35 Volt
+ AMP_VOLT1_3 = 0x40, ///< 1.3 Volt
+ AMP_VOLT1_25 = 0x50, ///< 1.25 Volt
+ AMP_VOLT1_2 = 0x60 ///< 1.2 Volt
+} AMP_DIMM_VOLTAGE;
+
+/// UMA Mode
+typedef enum {
+ UMA_NONE = 0, ///< UMA None
+ UMA_SPECIFIED = 1, ///< UMA Specified
+ UMA_AUTO = 2 ///< UMA Auto
+} UMA_MODE;
+
+/// Force Training Mode
+typedef enum {
+ FORCE_TRAIN_1D = 0, ///< 1D Training only
+ FORCE_TRAIN_AUTO = 2 ///< Auto - 1D or 2D depending on configuration
+} FORCE_TRAIN_MODE;
+
+/// The possible DRAM prefetch mode settings.
+typedef enum {
+ DRAM_PREFETCHER_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled.
+ DISABLE_DRAM_PREFETCH_FOR_IO, ///< Disable DRAM prefetching for I/O requests only.
+ DISABLE_DRAM_PREFETCH_FOR_CPU, ///< Disable DRAM prefetching for requests from processor cores only.
+ DISABLE_DRAM_PREFETCHER, ///< Disable DRAM prefetching.
+ MAX_DRAM_FREFETCH_MODE ///< Not a DRAM prefetch mode, use for limit checking.
+} DRAM_PREFETCH_MODE;
+
+/// Build Configuration values for BLDCFG_UMA_ALIGNMENT
+typedef enum {
+ NO_UMA_ALIGNED = 0x00FFFFFF, ///< NO UMA aligned
+ UMA_4MB_ALIGNED = 0x00FFFFC0, ///< UMA 4MB aligned
+ UMA_128MB_ALIGNED = 0x00FFF800, ///< UMA 128MB aligned
+ UMA_256MB_ALIGNED = 0x00FFF000, ///< UMA 256MB aligned
+ UMA_512MB_ALIGNED = 0x00FFE000, ///< UMA 512MB aligned
+} UMA_ALIGNMENT;
+
+///
+/// Global MCT Configuration Status Word (GStatus)
+///
+typedef enum {
+ GsbMTRRshort, ///< Ran out of MTRRs while mapping memory
+ GsbAllECCDimms, ///< All banks of all Nodes are ECC capable
+ GsbDramECCDis, ///< Dram ECC requested but not enabled.
+ GsbSoftHole, ///< A Node Base gap was created
+ GsbHWHole, ///< A HW dram remap was created
+ GsbNodeIntlv, ///< Node Memory interleaving was enabled
+ GsbSpIntRemapHole, ///< Special condition for Node Interleave and HW remapping
+ GsbEnDIMMSpareNW, ///< Indicates that DIMM Spare can be used without a warm reset
+
+ GsbEOL ///< End of list
+} GLOBAL_STATUS_FIELD;
+
+///
+/// Local Error Status (DIE_STRUCT.ErrStatus[31:0])
+///
+typedef enum {
+ EsbNoDimms, ///< No DIMMs
+ EsbSpdChkSum, ///< SPD Checksum fail
+ EsbDimmMismatchM, ///< dimm module type(buffer) mismatch
+ EsbDimmMismatchT, ///< dimm CL/T mismatch
+ EsbDimmMismatchO, ///< dimm organization mismatch (128-bit)
+ EsbNoTrcTrfc, ///< SPD missing Trc or Trfc info
+ EsbNoCycTime, ///< SPD missing byte 23 or 25
+ EsbBkIntDis, ///< Bank interleave requested but not enabled
+ EsbDramECCDis, ///< Dram ECC requested but not enabled
+ EsbSpareDis, ///< Online spare requested but not enabled
+ EsbMinimumMode, ///< Running in Minimum Mode
+ EsbNoRcvrEn, ///< No DQS Receiver Enable pass window found
+ EsbSmallRcvr, ///< DQS Rcvr En pass window too small (far right of dynamic range)
+ EsbNoDqsPos, ///< No DQS-DQ passing positions
+ EsbSmallDqs, ///< DQS-DQ passing window too small
+ EsbDCBKScrubDis, ///< DCache scrub requested but not enabled
+
+ EsbEMPNotSupported, ///< Processor is not capable for EMP.
+ EsbEMPConflict, ///< EMP requested but cannot be enabled since
+ ///< channel interleaving, bank interleaving, or bank swizzle is enabled.
+ EsbEMPDis, ///< EMP requested but cannot be enabled since
+ ///< memory size of each DCT is not a power of two.
+
+ EsbEOL ///< End of list
+} ERROR_STATUS_FIELD;
+
+///
+/// Local Configuration Status (DIE_STRUCT.Status[31:0])
+///
+typedef enum {
+ SbRegistered, ///< All DIMMs are Registered
+ SbEccDimms, ///< All banks ECC capable
+ SbParDimms, ///< All banks Addr/CMD Parity capable
+ SbDiagClks, ///< Jedec ALL slots clock enable diag mode
+ Sb128bitmode, ///< DCT in 128-bit mode operation
+ Sb64MuxedMode, ///< DCT in 64-bit mux'ed mode.
+ Sb2TMode, ///< 2T CMD timing mode is enabled.
+ SbSWNodeHole, ///< Remapping of Node Base on this Node to create a gap.
+ SbHWHole, ///< Memory Hole created on this Node using HW remapping.
+ SbOver400Mhz, ///< DCT freq greater than or equal to 400MHz flag
+ SbDQSPosPass2, ///< Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz
+ SbDQSRcvLimit, ///< Used for DQSRcvEnTrain to know we have reached the upper bound.
+ SbExtConfig, ///< Indicate the default setting for extended PCI configuration support
+ SbLrdimms, ///< All DIMMs are LRDIMMs
+
+ SbEOL ///< End of list
+} LOCAL_STATUS_FIELD;
+
+
+///< CPU MSR Register definitions ------------------------------------------
+#define SYS_CFG 0xC0010010ul
+#ifndef TOP_MEM
+#define TOP_MEM 0xC001001Aul
+#endif
+#ifndef TOP_MEM2
+#define TOP_MEM2 0xC001001Dul
+#endif
+#define HWCR 0xC0010015ul
+#define NB_CFG 0xC001001Ful
+
+#define FS_BASE 0xC0000100ul
+#define IORR0_BASE 0xC0010016ul
+#define IORR0_MASK 0xC0010017ul
+#define BU_CFG 0xC0011023ul
+#define BU_CFG2 0xC001102Aul
+#define COFVID_STAT 0xC0010071ul
+#define TSC 0x10
+
+//-----------------------------------------------------------------------------
+///
+/// SPD Data for each DIMM.
+///
+typedef struct _SPD_DEF_STRUCT {
+ IN BOOLEAN DimmPresent; ///< Indicates that the DIMM is present and Data is valid
+ IN UINT8 Data[256]; ///< Buffer for 256 Bytes of SPD data from DIMM
+} SPD_DEF_STRUCT;
+
+///
+/// Channel Definition Structure.
+/// This data structure defines entries that are specific to the channel initialization
+///
+typedef struct _CH_DEF_STRUCT {
+ OUT UINT8 ChannelID; ///< Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D)
+ OUT TECHNOLOGY_TYPE TechType; ///< Technology type of this channel
+ OUT UINT8 ChDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is present.
+ ///< DIMM# Select Signal
+ ///< 0 MA0_CS_L[0, 1]
+ ///< 1 MB0_CS_L[0, 1]
+ ///< 2 MA1_CS_L[0, 1]
+ ///< 3 MB1_CS_L[0, 1]
+ ///< 4 MA2_CS_L[0, 1]
+ ///< 5 MB2_CS_L[0, 1]
+ ///< 6 MA3_CS_L[0, 1]
+ ///< 7 MB3_CS_L[0, 1]
+
+ OUT struct _DCT_STRUCT *DCTPtr; ///< Pointer to the DCT data of this channel.
+ OUT struct _DIE_STRUCT *MCTPtr; ///< Pointer to the node data of this channel.
+ OUT SPD_DEF_STRUCT *SpdPtr; ///< Pointer to the SPD data for this channel. (Setup by NB Constructor)
+ OUT SPD_DEF_STRUCT *DimmSpdPtr[MAX_DIMMS_PER_CHANNEL]; ///< Array of pointers to
+ ///< SPD Data for each Dimm. (Setup by Tech Block Constructor)
+ OUT UINT8 ChDimmValid; ///< For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved.
+ ///<
+ OUT UINT8 RegDimmPresent; ///< For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved.
+ OUT UINT8 LrDimmPresent; ///< For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved.
+ OUT UINT8 SODimmPresent; ///< For each bit n 0..3, 1 = DIMM n is a SO-DIMM, where 4..7 are reserved.
+ OUT UINT8 Loads; ///< Number of devices loading bus
+ OUT UINT8 Dimms; ///< Number of DIMMs loading Channel
+ OUT UINT8 Ranks; ///< Number of ranks loading Channel DATA
+ OUT BOOLEAN SlowMode; ///< 1T or 2T CMD mode (slow access mode)
+ ///< FALSE = 1T
+ ///< TRUE = 2T
+ ///< The following pointers will be pointed to dynamically allocated buffers.
+ ///< Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below.
+ ///< Example: If DIMM and Byte based training, then
+ ///< XX is a value in Hex
+ ///< BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE
+ ///< Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX
+ ///< Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX
+ OUT UINT16 *RcvEnDlys; ///< DQS Receiver Enable Delays
+ OUT UINT8 *WrDqsDlys; ///< Write DQS delays (only valid for DDR3)
+ OUT UINT8 *RdDqsDlys; ///< Read Dqs delays
+ OUT UINT8 *WrDatDlys; ///< Write Data delays
+ OUT UINT8 *RdDqs2dDlys; ///< 2d Read DQS data
+ OUT UINT8 *RdDqsMinDlys; ///< Minimum Window for Read DQS
+ OUT UINT8 *RdDqsMaxDlys; ///< Maximum Window for Read DQS
+ OUT UINT8 *WrDatMinDlys; ///< Minimum Window for Write data
+ OUT UINT8 *WrDatMaxDlys; ///< Maximum Window for Write data
+ OUT UINT16 *RcvEnDlysMemPs1; ///< DQS Receiver Enable Delays for Mem Pstate 1
+ OUT UINT8 *WrDqsDlysMemPs1; ///< Write DQS delays (only valid for DDR3) for Mem Pstate 1
+ OUT UINT8 *RdDqsDlysMemPs1; ///< Read Dqs delays for Memory Pstate 1
+ OUT UINT8 *WrDatDlysMemPs1; ///< Write Data delays for Memory Pstate 1
+ OUT UINT8 *RdDqs2dDlysMemPs1; ///< 2d Read DQS data for Memory Pstate 1
+ OUT UINT8 *RdDqsMinDlysMemPs1; ///< Minimum Window for Read DQS for Memory Pstate 1
+ OUT UINT8 *RdDqsMaxDlysMemPs1; ///< Maximum Window for Read DQS for Memory Pstate 1
+ OUT UINT8 *WrDatMinDlysMemPs1; ///< Minimum Window for Write data for Memory Pstate 1
+ OUT UINT8 *WrDatMaxDlysMemPs1; ///< Maximum Window for Write data for Memory Pstate 1
+ OUT UINT8 RowCount; ///< Number of rows of the allocated buffer.
+ OUT UINT8 ColumnCount; ///< Number of columns of the allocated buffer.
+ OUT UINT8 *FailingBitMask; ///< Table of masks to Track Failing bits
+ OUT UINT8 *FailingBitMaskMemPs1; ///< Table of masks to Track Failing bits for Memory Pstate 1
+ OUT VOID *RdDataEyes; ///< Pointer to Read Data Eye Bitmaps
+ OUT VOID *WrDataEyes; ///< Pointer to Write Data Eye Bitmaps
+ OUT UINT32 DctOdcCtl; ///< Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h)
+ OUT UINT32 DctAddrTmg; ///< Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h)
+ OUT UINT32 PhyRODTCSLow; ///< Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 230h)
+ OUT UINT32 PhyRODTCSHigh; ///< Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 234h)
+ OUT UINT32 PhyWODTCSLow; ///< Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 238h)
+ OUT UINT32 PhyWODTCSHigh; ///< Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 23Ch)
+ OUT UINT8 PhyWLODT[4]; ///< Write Levelization ODT Pattern for Dimm 0-3 or CS 0-7(see BKDG FN2:Offset 9Ch, index 0x8[11:8])
+ OUT UINT16 DctEccDqsLike; ///< DCT DQS ECC UINT8 like...
+ OUT UINT8 DctEccDqsScale; ///< DCT DQS ECC UINT8 scale
+ OUT UINT16 PtrPatternBufA; ///< Ptr on stack to aligned DQS testing pattern
+ OUT UINT16 PtrPatternBufB; ///< Ptr on stack to aligned DQS testing pattern
+ OUT UINT8 ByteLane; ///< Current UINT8 Lane (0..7)
+ OUT UINT8 Direction; ///< Current DQS-DQ training write direction (0=read, 1=write)
+ OUT UINT8 Pattern; ///< Current pattern
+ OUT UINT8 DqsDelay; ///< Current DQS delay value
+ OUT UINT16 HostBiosSrvc1; ///< UINT16 sized general purpose field for use by host BIOS. Scratch space.
+ OUT UINT32 HostBiosSrvc2; ///< UINT32 sized general purpose field for use by host BIOS. Scratch space.
+ OUT UINT16 DctMaxRdLat[4]; ///< Max Read Latency (ns) for the DCT
+ ///< DctMaxRdLat [i] is for NBPstate i
+ OUT UINT8 DIMMValidCh; ///< DIMM# in CH
+ OUT UINT8 MaxCh; ///< Max number of CH in system
+ OUT UINT8 Dct; ///< Dct pointer
+ OUT UINT8 WrDatGrossH; ///< Write Data Gross delay high value
+ OUT UINT8 DqsRcvEnGrossL; ///< DQS Receive Enable Gross Delay low
+
+ OUT UINT8 TrwtWB; ///< Non-SPD timing value for TrwtWB
+ OUT UINT8 CurrRcvrDctADelay; ///< for keep current RcvrEnDly
+ OUT UINT16 T1000; ///< get the T1000 figure (cycle time (ns) * 1K)
+ OUT UINT8 DqsRcvEnPass; ///< for TrainRcvrEn UINT8 lane pass flag
+ OUT UINT8 DqsRcvEnSaved; ///< for TrainRcvrEn UINT8 lane saved flag
+ OUT UINT8 SeedPass1Remainder; ///< for Phy assisted DQS receiver enable training
+
+ OUT UINT8 ClToNbFlag; ///< is used to restore ClLinesToNbDis bit after memory
+ OUT UINT32 NodeSysBase; ///< for channel interleave usage
+ OUT UINT8 RefRawCard[MAX_DIMMS_PER_CHANNEL]; ///< Array of rawcards detected
+ OUT UINT8 CtrlWrd02[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 2 values per DIMM
+ OUT UINT8 CtrlWrd03[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 3 values per DIMM
+ OUT UINT8 CtrlWrd04[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 4 values per DIMM
+ OUT UINT8 CtrlWrd05[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 5 values per DIMM
+ OUT UINT8 CtrlWrd08[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 8 values per DIMM
+
+ OUT UINT16 CsPresentDCT; ///< For each bit n 0..7, 1 = Chip-select n is present
+ OUT UINT8 DimmMirrorPresent; ///< For each bit n 0..3, 1 = DIMM n is OnDimmMirror capable where 4..7 are reserved.
+ OUT UINT8 DimmSpdCse; ///< For each bit n 0..3, 1 = DIMM n SPD checksum error where 4..7 are reserved.
+ OUT UINT8 DimmExclude; ///< For each bit n 0..3, 1 = DIMM n gets excluded where 4..7 are reserved.
+ OUT UINT8 DimmYr06; ///< Bitmap indicating which Dimms have a manufacturer's year code <= 2006
+ OUT UINT8 DimmWk2406; ///< Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June)
+ OUT UINT8 DimmPlPresent; ///< Bitmap indicating that Planar (1) or Stacked (0) Dimms are present.
+ OUT UINT8 DimmQrPresent; ///< QuadRank DIMM present?
+ OUT UINT8 DimmDrPresent; ///< Bitmap indicating that Dual Rank Dimms are present
+ OUT UINT8 DimmSRPresent; ///< Bitmap indicating that Single Rank Dimms are present
+ OUT UINT8 Dimmx4Present; ///< For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved.
+ OUT UINT8 Dimmx8Present; ///< For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved.
+ OUT UINT8 Dimmx16Present; ///< For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved.
+ OUT UINT8 LrdimmPhysicalRanks[MAX_DIMMS_PER_CHANNEL];///< Number of Physical Ranks for LRDIMMs
+ OUT UINT8 LrDimmLogicalRanks[MAX_DIMMS_PER_CHANNEL];///< Number of LRDIMM Logical ranks in this configuration
+ OUT UINT8 LrDimmRankMult[MAX_DIMMS_PER_CHANNEL];///< Rank Multipication factor per dimm.
+ OUT UINT8 DimmNibbleAccess; ///< For each bit n 0..3, 1 = DIMM n will use nibble signaling. Where 4..7 are reserved.
+ OUT UINT8 *MemClkDisMap; ///< This pointer will be set to point to an array that describes
+ ///< the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will
+ ///< base on this array to disable unused MemClk to save power.
+ ///<
+ ///< The array must have 8 entries. Each entry, which associates with
+ ///< one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to.
+
+ OUT UINT8 *CKETriMap; ///< This pointer will be set to point to an array that describes
+ ///< the routing of CKE pins to the DIMMs' ranks.
+ ///< The array must have 2 entries. Each entry, which associates with
+ ///< one CKE pin, is a bitmap of 8 CS that that CKE is routed to.
+ ///< AGESA will base on this array to disable unused CKE pins to save power.
+
+ OUT UINT8 *ODTTriMap; ///< This pointer will be set to point to an array that describes
+ ///< the routing of ODT pins to the DIMMs' ranks.
+ ///< The array must have 4 entries. Each entry, which associates with
+ ///< one ODT pin, is a bitmap of 8 CS that that ODT is routed to.
+ ///< AGESA will base on this array to disable unused ODT pins to save power.
+
+ OUT UINT8 *ChipSelTriMap; ///< This pointer will be set to point to an array that describes
+ ///< the routing of chip select pins to the DIMMs' ranks.
+ ///< The array must have 8 entries. Each entry is a bitmap of 8 CS.
+ ///< AGESA will base on this array to disable unused Chip select pins to save power.
+
+ OUT BOOLEAN ExtendTmp; ///< If extended temperature is supported on all dimms on a channel.
+
+ OUT UINT8 MaxVref; ///< Maximum Vref Value for channel
+
+ OUT UINT8 Reserved[100]; ///< Reserved
+} CH_DEF_STRUCT;
+
+///
+/// DCT Channel Timing Parameters.
+/// This data structure sets timings that are specific to the channel.
+///
+typedef struct _CH_TIMING_STRUCT {
+ OUT UINT16 DctDimmValid; ///< For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved.
+ OUT UINT16 DimmMirrorPresent; ///< For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved.
+ OUT UINT16 DimmSpdCse; ///< For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved.
+ OUT UINT16 DimmExclude; ///< For each bit n 0..3, 1 = DIMM n gets excluded where 4..7 are reserved.
+ OUT UINT16 CsPresent; ///< For each bit n 0..7, 1=Chip-select n is present
+ OUT UINT16 CsEnabled; ///< For each bit n 0..7, 1=Chip-select n is enabled
+ OUT UINT16 CsTestFail; ///< For each bit n 0..7, 1=Chip-select n is present but disabled
+ OUT UINT16 CsTrainFail; ///< Bitmap showing which chipselects failed training
+ OUT UINT16 DIMM1KPage; ///< For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved
+ OUT UINT16 DimmQrPresent; ///< QuadRank DIMM present?
+ OUT UINT16 DimmDrPresent; ///< Bitmap indicating that Dual Rank Dimms are present , where 4..7 are reserved
+ OUT UINT8 DimmSRPresent; ///< Bitmap indicating that Single Rank Dimms are present, where 4..7 are reserved
+ OUT UINT16 Dimmx4Present; ///< For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved
+ OUT UINT16 Dimmx8Present; ///< For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved
+ OUT UINT16 Dimmx16Present; ///< For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved
+
+ OUT UINT16 DIMMTrcd; ///< Minimax Trcd*40 (ns) of DIMMs
+ OUT UINT16 DIMMTrp; ///< Minimax Trp*40 (ns) of DIMMs
+ OUT UINT16 DIMMTrtp; ///< Minimax Trtp*40 (ns) of DIMMs
+ OUT UINT16 DIMMTras; ///< Minimax Tras*40 (ns) of DIMMs
+ OUT UINT16 DIMMTrc; ///< Minimax Trc*40 (ns) of DIMMs
+ OUT UINT16 DIMMTwr; ///< Minimax Twr*40 (ns) of DIMMs
+ OUT UINT16 DIMMTrrd; ///< Minimax Trrd*40 (ns) of DIMMs
+ OUT UINT16 DIMMTwtr; ///< Minimax Twtr*40 (ns) of DIMMs
+ OUT UINT16 DIMMTfaw; ///< Minimax Tfaw*40 (ns) of DIMMs
+ OUT UINT16 TargetSpeed; ///< Target DRAM bus speed in MHz
+ OUT UINT16 Speed; ///< DRAM bus speed in MHz
+ ///< 400 (MHz)
+ ///< 533 (MHz)
+ ///< 667 (MHz)
+ ///< 800 (MHz)
+ ///< and so on...
+ OUT UINT8 CasL; ///< CAS latency DCT setting (busclocks)
+ OUT UINT8 Trcd; ///< DCT Trcd (busclocks)
+ OUT UINT8 Trp; ///< DCT Trp (busclocks)
+ OUT UINT8 Trtp; ///< DCT Trtp (busclocks)
+ OUT UINT8 Tras; ///< DCT Tras (busclocks)
+ OUT UINT8 Trc; ///< DCT Trc (busclocks)
+ OUT UINT8 Twr; ///< DCT Twr (busclocks)
+ OUT UINT8 Trrd; ///< DCT Trrd (busclocks)
+ OUT UINT8 Twtr; ///< DCT Twtr (busclocks)
+ OUT UINT8 Tfaw; ///< DCT Tfaw (busclocks)
+ OUT UINT8 Trfc0; ///< DCT Logical DIMM0 Trfc
+ ///< 0 = 75ns (for 256Mb devs)
+ ///< 1 = 105ns (for 512Mb devs)
+ ///< 2 = 127.5ns (for 1Gb devs)
+ ///< 3 = 195ns (for 2Gb devs)
+ ///< 4 = 327.5ns (for 4Gb devs)
+ OUT UINT8 Trfc1; ///< DCT Logical DIMM1 Trfc (see Trfc0 for format)
+ OUT UINT8 Trfc2; ///< DCT Logical DIMM2 Trfc (see Trfc0 for format)
+ OUT UINT8 Trfc3; ///< DCT Logical DIMM3 Trfc (see Trfc0 for format)
+ OUT UINT32 DctMemSize; ///< Base[47:16], total DRAM size controlled by this DCT.
+ ///<
+ OUT BOOLEAN SlowMode; ///< 1T or 2T CMD mode (slow access mode)
+ ///< FALSE = 1T
+ ///< TRUE = 2T
+ OUT UINT8 TrwtTO; ///< DCT TrwtTO (busclocks)
+ OUT UINT8 Twrrd; ///< DCT Twrrd (busclocks)
+ OUT UINT8 Twrwr; ///< DCT Twrwr (busclocks)
+ OUT UINT8 Trdrd; ///< DCT Trdrd (busclocks)
+ OUT UINT8 TrwtWB; ///< DCT TrwtWB (busclocks)
+ OUT UINT8 TrdrdSD; ///< DCT TrdrdSD (busclocks)
+ OUT UINT8 TwrwrSD; ///< DCT TwrwrSD (busclocks)
+ OUT UINT8 TwrrdSD; ///< DCT TwrrdSD (busclocks)
+ OUT UINT16 MaxRdLat; ///< Max Read Latency
+ OUT UINT8 WrDatGrossH; ///< Temporary variables must be removed
+ OUT UINT8 DqsRcvEnGrossL; ///< Temporary variables must be removed
+} CH_TIMING_STRUCT;
+
+///
+/// Data for each DCT.
+/// This data structure defines data used to configure each DRAM controller.
+///
+typedef struct _DCT_STRUCT {
+ OUT UINT8 Dct; ///< Current Dct
+ OUT CH_TIMING_STRUCT Timings; ///< Channel Timing structure
+ OUT CH_TIMING_STRUCT *TimingsMemPs1; ///< Pointed to channel timing structure for memory Pstate 1
+ OUT CH_DEF_STRUCT *ChData; ///< Pointed to a dynamically allocated array of Channel structures
+ OUT UINT8 ChannelCount; ///< Number of channel per this DCT
+ OUT BOOLEAN BkIntDis; ///< Bank interleave requested but not enabled on current DCT
+ OUT UINT8 BankAddrMap; ///< Bank Address Mapping
+ OUT UINT8 EnabledChipSels; ///< Number of enabled chip selects on current DCT
+} DCT_STRUCT;
+
+
+///
+/// Data Structure defining each Die.
+/// This data structure contains information that is used to configure each Die.
+///
+typedef struct _DIE_STRUCT {
+
+ /// Advanced:
+
+ OUT UINT8 NodeId; ///< Node ID of current controller
+ OUT UINT8 SocketId; ///< Socket ID of this Die
+ OUT UINT8 DieId; ///< ID of this die relative to the socket
+ OUT PCI_ADDR PciAddr; ///< Pci bus and device number of this controller.
+ OUT AGESA_STATUS ErrCode; ///< Current error condition of Node
+ ///< 0x0 = AGESA_SUCCESS
+ ///< 0x1 = AGESA_UNSUPPORTED
+ ///< 0x2 = AGESA_BOUNDS_CHK
+ ///< 0x3 = AGESA_ALERT
+ ///< 0x4 = AGESA_WARNING
+ ///< 0x5 = AGESA_ERROR
+ ///< 0x6 = AGESA_CRITICAL
+ ///< 0x7 = AGESA_FATAL
+ ///<
+ OUT BOOLEAN ErrStatus[EsbEOL]; ///< Error Status bit Field
+ ///<
+ OUT BOOLEAN Status[SbEOL]; ///< Status bit Field
+ ///<
+ OUT UINT32 NodeMemSize; ///< Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node.
+ ///<
+ OUT UINT32 NodeSysBase; ///< Base[47:16] (system address) DRAM base address of this Node.
+ ///<
+ OUT UINT32 NodeHoleBase; ///< If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node
+ ///<
+ OUT UINT32 NodeSysLimit; ///< Base[47:16] (system address) DRAM limit address of this Node.
+ ///<
+ OUT UINT32 DimmPresent; ///< For each bit n 0..7, 1 = DIMM n is present.
+ ///< DIMM# Select Signal
+ ///< 0 MA0_CS_L[0, 1]
+ ///< 1 MB0_CS_L[0, 1]
+ ///< 2 MA1_CS_L[0, 1]
+ ///< 3 MB1_CS_L[0, 1]
+ ///< 4 MA2_CS_L[0, 1]
+ ///< 5 MB2_CS_L[0, 1]
+ ///< 6 MA3_CS_L[0, 1]
+ ///< 7 MB3_CS_L[0, 1]
+ ///<
+ OUT UINT32 DimmValid; ///< For each bit n 0..7, 1 = DIMM n is valid and is / will be configured
+ OUT UINT32 RegDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is registered DIMM
+ OUT UINT32 LrDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is Load Reduced DIMM
+ OUT UINT32 DimmEccPresent; ///< For each bit n 0..7, 1 = DIMM n is ECC capable.
+ OUT UINT32 DimmParPresent; ///< For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable.
+ ///<
+ OUT UINT16 DimmTrainFail; ///< Bitmap showing which dimms failed training
+ OUT UINT16 ChannelTrainFail; ///< Bitmap showing the channel information about failed Chip Selects
+ ///< 0 in any bit field indicates Channel 0
+ ///< 1 in any bit field indicates Channel 1
+ OUT UINT8 Dct; ///< Need to be removed
+ ///< DCT pointer
+ OUT BOOLEAN GangedMode; ///< Ganged mode
+ ///< 0 = disabled
+ ///< 1 = enabled
+ OUT CPU_LOGICAL_ID LogicalCpuid; ///< The logical CPUID of the node
+ ///<
+ OUT UINT16 HostBiosSrvc1; ///< UINT16 sized general purpose field for use by host BIOS. Scratch space.
+ ///<
+ OUT UINT32 HostBiosSrvc2; ///< UINT32 sized general purpose field for use by host BIOS. Scratch space.
+ ///<
+ OUT UINT8 MLoad; ///< Need to be removed
+ ///< Number of devices loading MAA bus
+ ///<
+ OUT UINT8 MaxAsyncLat; ///< Legacy wrapper
+ ///<
+ OUT UINT8 ChbD3Rcvrdly; ///< Legacy wrapper
+ ///<
+ OUT UINT16 ChaMaxRdLat; ///< Max Read Latency (ns) for DCT 0
+ ///<
+ OUT UINT8 ChbD3BcRcvrdly; ///< CHB DIMM 3 Check UINT8 Receiver Enable Delay
+
+ OUT DCT_STRUCT *DctData; ///< Pointed to a dynamically allocated array of DCT_STRUCTs
+ OUT UINT8 DctCount; ///< Number of DCTs per this Die
+ OUT UINT8 Reserved[16]; ///< Reserved
+} DIE_STRUCT;
+
+/**********************************************************************
+ * S3 Support structure
+ **********************************************************************/
+/// AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure
+typedef struct {
+ OUT UINT32 Signature; ///< "ASTR" for AMD Suspend-To-RAM
+ OUT UINT16 Version; ///< S3 Params version number
+ IN OUT UINT32 Flags; ///< Indicates operation
+ IN OUT VOID *NvStorage; ///< Pointer to memory critical save state data
+ IN OUT UINT32 NvStorageSize; ///< Size in bytes of the NvStorage region
+ IN OUT VOID *VolatileStorage; ///< Pointer to remaining AMD save state data
+ IN OUT UINT32 VolatileStorageSize; ///< Size in bytes of the VolatileStorage region
+} AMD_S3_PARAMS;
+
+///===============================================================================
+/// MEM_PARAMETER_STRUCT
+/// This data structure is used to pass wrapper parameters to the memory configuration code
+///
+typedef struct _MEM_PARAMETER_STRUCT {
+
+ // Basic (Return parameters)
+ // (This section contains the outbound parameters from the memory init code)
+
+ OUT BOOLEAN GStatus[GsbEOL]; ///< Global Status bitfield.
+ ///<
+ OUT UINT32 HoleBase; ///< If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping.
+ ///<
+ OUT UINT32 Sub4GCacheTop; ///< If not zero, the 32-bit top of cacheable memory.
+ ///<
+ OUT UINT32 Sub1THoleBase; ///< If not zero Base[47:16] (system address) of sub 1TB dram hole.
+ ///<
+ OUT UINT32 SysLimit; ///< Limit[47:16] (system address).
+ ///<
+ OUT DIMM_VOLTAGE DDR3Voltage; ///< Find support voltage and send back to platform BIOS.
+ ///<
+ OUT UINT8 ExternalVrefValue; ///< Target reference voltage for external Vref for 2D training
+ ///<
+ OUT struct _MEM_DATA_STRUCT *MemData; ///< Access to global memory init data.
+
+ // Advanced (Optional parameters)
+ // Optional (all defaults values will be initialized by the
+ // 'AmdMemInitDataStructDef' based on AMD defaults. It is up
+ // to the IBV/OEM to change the defaults after initialization
+ // but prior to the main entry to the memory code):
+
+ // Memory Map/Mgt.
+
+ IN UINT16 BottomIo; ///< Bottom of 32-bit IO space (8-bits).
+ ///< NV_BOTTOM_IO[7:0]=Addr[31:24]
+ ///<
+ IN BOOLEAN MemHoleRemapping; ///< Memory Hole Remapping (1-bit).
+ ///< FALSE = disable
+ ///< TRUE = enable
+ ///<
+ IN BOOLEAN LimitMemoryToBelow1Tb;///< Limit memory address space to below 1 TB
+ ///< FALSE = disable
+ ///< TRUE = enable
+ ///<
+ ///< @BldCfgItem{BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB}
+
+
+ // Dram Timing
+
+ IN UINT32 UserTimingMode; ///< User Memclock Mode.
+ ///< @BldCfgItem{BLDCFG_TIMING_MODE_SELECT}
+
+ IN UINT32 MemClockValue; ///< Memory Clock Value.
+ ///< @BldCfgItem{BLDCFG_MEMORY_CLOCK_SELECT}
+
+
+ // Dram Configuration
+
+ IN BOOLEAN EnableBankIntlv; ///< Dram Bank (chip-select) Interleaving (1-bit).
+ ///< - FALSE =disable (default)
+ ///< - TRUE = enable
+ ///<
+ ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING}
+
+ IN BOOLEAN EnableNodeIntlv; ///< Node Memory Interleaving (1-bit).
+ ///< - FALSE = disable (default)
+ ///< - TRUE = enable
+ ///<
+ ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING}
+
+ IN BOOLEAN EnableChannelIntlv; ///< Channel Interleaving (1-bit).
+ ///< - FALSE = disable (default)
+ ///< - TRUE = enable
+ ///<
+ ///< @BldCfgItem{BLDCFG_MEMORY_CHANNEL_INTERLEAVING}
+ // ECC
+
+ IN BOOLEAN EnableEccFeature; ///< enable ECC error to go into MCE.
+ ///< - FALSE = disable (default)
+ ///< - TRUE = enable
+ ///<
+ ///< @BldCfgItem{BLDCFG_ENABLE_ECC_FEATURE}
+ // Dram Power
+
+ IN BOOLEAN EnablePowerDown; ///< CKE based power down mode (1-bit).
+ ///< - FALSE =disable (default)
+ ///< - TRUE =enable
+ ///<
+ ///< @BldCfgItem{BLDCFG_MEMORY_POWER_DOWN}
+
+ // Online Spare
+
+ IN BOOLEAN EnableOnLineSpareCtl; ///< Chip Select Spare Control bit 0.
+ ///< - FALSE = disable Spare (default)
+ ///< - TRUE = enable Spare
+ ///<
+ ///< @BldCfgItem{BLDCFG_ONLINE_SPARE}
+
+ IN UINT8 *TableBasedAlterations; ///< Desired modifications to register settings.
+
+ IN PSO_TABLE *PlatformMemoryConfiguration;
+ ///< A table that contains platform specific settings.
+ ///< For example, MemClk routing, the number of DIMM slots per channel, ....
+ ///< AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that
+ ///< contains default conservative settings. Platform BIOS can either tweak
+ ///< DefaultPlatformMemoryConfiguration or reassign this pointer to its own table.
+ ///<
+ IN BOOLEAN EnableParity; ///< Parity control.
+ ///< - TRUE = enable
+ ///< - FALSE = disable (default)
+ ///<
+ ///< @BldCfgItem{BLDCFG_MEMORY_PARITY_ENABLE}
+
+ IN BOOLEAN EnableBankSwizzle; ///< BankSwizzle control.
+ ///< - FALSE = disable
+ ///< - TRUE = enable (default)
+ ///<
+ ///< @BldCfgItem{BLDCFG_BANK_SWIZZLE}
+
+ ///<
+
+ IN BOOLEAN EnableMemClr; ///< Memory Clear functionality control.
+ ///< - FALSE = disable
+ ///< - TRUE = enable (default)
+ ///<
+
+ // Uma Configuration
+
+ IN UMA_MODE UmaMode; ///< Uma Mode
+ ///< 0 = None
+ ///< 1 = Specified
+ ///< 2 = Auto
+ IN OUT UINT32 UmaSize; ///< The size of shared graphics dram (16-bits)
+ ///< NV_UMA_Size[31:0]=Addr[47:16]
+ ///<
+ OUT UINT32 UmaBase; ///< The allocated Uma base address (32-bits)
+ ///< NV_UMA_Base[31:0]=Addr[47:16]
+ ///<
+
+ /// Memory Restore Feature
+
+ IN BOOLEAN MemRestoreCtl; ///< Memory context restore control
+ ///< FALSE = perform memory init as normal (AMD default)
+ ///< TRUE = restore memory context and skip training. This requires
+ ///< MemContext is valid before AmdInitPost
+ ///<
+ IN BOOLEAN SaveMemContextCtl; ///< Control switch to save memory context at the end of MemAuto
+ ///< TRUE = AGESA will setup MemContext block before exit AmdInitPost
+ ///< FALSE = AGESA will not setup MemContext block. Platform is
+ ///< expected to call S3Save later in POST if it wants to
+ ///< use memory context restore feature.
+ ///<
+ IN OUT AMD_S3_PARAMS MemContext; ///< Memory context block describes the data that platform needs to
+ ///< save and restore for memory context restore feature to work.
+ ///< It uses the subset of S3Save block to save/restore. Hence platform
+ ///< may save only S3 block and uses it for both S3 resume and
+ ///< memory context restore.
+ ///< - If MemRestoreCtl is TRUE, platform needs to pass in MemContext
+ ///< before AmdInitPost.
+ ///< - If SaveMemContextCtl is TRUE, platform needs to save MemContext
+ ///< right after AmdInitPost.
+ ///<
+ IN BOOLEAN IsCapsuleMode; ///< Capsule reboot control
+ ///< FALSE = This is not a capsule reboot.
+ ///< TRUE = This is a capsule reboot.
+ ///<
+ IN BOOLEAN ExternalVrefCtl; ///< Control the use of external Vref
+ ///< TRUE = AGESA will use the function defined in "AGESA_EXTERNAL_VREF_CHANGE" in function list
+ ///< to change the vref
+ ///< FALSE = AGESA will will use the internal vref control.
+ ///< @BldCfgItem{BLDCFG_ENABLE_EXTERNAL_VREF_FEATURE}
+ ///<
+ IN FORCE_TRAIN_MODE ForceTrainMode; ///< Training Mode
+ ///< 0 = Force 1D Training for all configurations
+ ///< 1 = Force 2D Training for all configurations
+ ///< 2 = Auto - AGESA will control 1D or 2D
+ IN TECHNOLOGY_TYPE DimmTypeUsedInMixedConfig; ///< Select the preferred technology type that AGESA will enable
+ ///< when it is mixed with other technology types.
+ ///< DDR3_TECHNOLOGY = Use DDR3 DIMMs
+ ///< @BldCfgItem{BLDCFG_DIMM_TYPE_USED_IN_MIXED_CONFIG}
+ IN BOOLEAN AmpEnable; ///< AMP functionality control
+ ///< TRUE = Enable, platform BIOS requests to enable memory overclocking function, and AGESA
+ ///< detects if memory is capable of it
+ ///< FALSE = Disable, there is no request to enable memory overclocking function
+ ///<
+ IN BOOLEAN AmpWarningMsgEnable; ///< AMP warning messages control
+ ///< TRUE = Enable to log the warning messages of AMP
+ ///< FALSE = Disable
+ ///<
+ OUT AMP_STATUS AmpStatus; ///< AMP status allows platform BIOS to check which voltage or warning message it should
+ ///< use/apply.
+ ///<
+ ///< AmpVoltageValid :
+ ///< TRUE - AGESA does enable AMP function, so use AmpVoltage for voltage adjustment
+ ///< FALSE - AGESA does not enable AMP function, so use DDR3Voltage for voltage adjustment
+ ///<
+ ///< AmpSupportDetectedButNotEnabled :
+ ///< TRUE - Display warning message of "AMP support detected but not enabled"
+ ///< FALSE - No corresponding message should be displayed
+ ///<
+ ///< AmpSelectedButNotEnabled :
+ ///< TRUE - Display warning message of "AMP selected but not enabled"
+ ///< FALSE - No corresponding message should be displayed
+ ///<
+ ///< Note that both of warning message status reports are controlled by AmpWarningMsgEnable
+ ///<
+ OUT AMP_DIMM_VOLTAGE AmpVoltage; ///< AMP voltage which will be sent back to platform BIOS, and
+ ///< the value in AmpVoltage is valid only if AmpStatus is TRUE returned
+ IN BOOLEAN DataEyeEn; ///< Get 2D training data eye
+ ///< TRUE = Enable to get the 2D data eye
+ ///< FALSE = The 2D data eye is not enabled
+ ///< @BldCfgItem{BLDCFG_ENABLE_DATA_EYE}
+ IN BOOLEAN DramDoubleRefreshRate;///< Specify the average time between refresh requests to all DRAM devices.
+ ///< TRUE = 2x refresh rate.
+ ///< FALSE = 1x refresh rate.
+ ///< @BldCfgItem{BLDCFG_DRAM_DOUBLE_REFRESH_RATE}
+} MEM_PARAMETER_STRUCT;
+
+
+///
+/// Function definition.
+/// This data structure passes function pointers to the memory configuration code.
+/// The wrapper can use this structure with customized versions.
+///
+typedef struct _MEM_FUNCTION_STRUCT {
+
+ // PUBLIC required Internal functions
+
+ IN OUT BOOLEAN (*amdMemGetPsCfgU) ( VOID *pMemData); ///< Proc for Unbuffered DIMMs, platform specific
+ IN OUT BOOLEAN (*amdMemGetPsCfgR) (VOID *pMemData); ///< Proc for Registered DIMMs, platform specific
+
+ // PUBLIC optional functions
+
+ IN OUT VOID (*amdMemEccInit) (VOID *pMemData); ///< NB proc for ECC feature
+ IN OUT VOID (*amdMemChipSelectInterleaveInit) (VOID *pMemData); ///< NB proc for CS interleave feature
+ IN OUT VOID (*amdMemDctInterleavingInit) (VOID *pMemData); ///< NB proc for Channel interleave feature
+ IN OUT VOID (*amdMemMctInterleavingInit) (VOID *pMemData); ///< NB proc for Node interleave feature
+ IN OUT VOID (*amdMemParallelTraining) (VOID *pMemData); ///< NB proc for parallel training feature
+ IN OUT VOID (*amdMemEarlySampleSupport) (VOID *pMemData); ///< NB code for early sample support feature
+ IN OUT VOID (*amdMemMultiPartInitSupport) (VOID *pMemData); ///< NB code for 'multi-part'
+ IN OUT VOID (*amdMemOnlineSpareSupport) (VOID *pMemData); ///< NB code for On-Line Spare feature
+ IN OUT VOID (*amdMemUDimmInit) (VOID *pMemData); ///< NB code for UDIMMs
+ IN OUT VOID (*amdMemRDimmInit) (VOID *pMemData); ///< NB code for RDIMMs
+ IN OUT VOID (*amdMemLrDimmInit) (VOID *pMemData); ///< NB code for LRDIMMs
+ IN OUT UINT32 Reserved[100]; ///< Reserved for later function definition
+} MEM_FUNCTION_STRUCT;
+
+///
+/// Socket Structure
+///
+///
+typedef struct _MEM_SOCKET_STRUCT {
+ OUT VOID *ChannelPtr[MAX_CHANNELS_PER_SOCKET]; ///< Pointers to each channels training data
+
+ OUT VOID *TimingsPtr[MAX_CHANNELS_PER_SOCKET]; ///< Pointers to each channels timing data
+} MEM_SOCKET_STRUCT;
+
+///
+/// Contains all data relevant to Memory Initialization.
+///
+typedef struct _MEM_DATA_STRUCT {
+ IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+
+ IN MEM_PARAMETER_STRUCT *ParameterListPtr; ///< List of input Parameters
+
+ OUT MEM_FUNCTION_STRUCT FunctionList; ///< List of function Pointers
+
+ IN OUT AGESA_STATUS (*GetPlatformCfg[MAX_PLATFORM_TYPES]) (struct _MEM_DATA_STRUCT *MemData, UINT8 SocketID, CH_DEF_STRUCT *CurrentChannel); ///< look-up platform info
+
+ IN OUT BOOLEAN (*ErrorHandling)(struct _DIE_STRUCT *MCTPtr, UINT8 DCT, UINT16 ChipSelMask, AMD_CONFIG_PARAMS *StdHeader); ///< Error Handling
+
+
+ OUT MEM_SOCKET_STRUCT SocketList[MAX_SOCKETS_SUPPORTED]; ///< Socket list for memory code.
+ ///< SocketList is a shortcut for IBVs to retrieve training
+ ///< and timing data for each channel indexed by socket/channel,
+ ///< eliminating their need to parse die/dct/channel etc.
+ ///< It contains pointers to the populated data structures for
+ ///< each channel and skips the channel structures that are
+ ///< unpopulated. In the case of channels sharing the same DCT,
+ ///< the pTimings pointers will point to the same DCT Timing data.
+
+ OUT DIE_STRUCT *DiesPerSystem; ///< Pointed to an array of DIE_STRUCTs
+ OUT UINT8 DieCount; ///< Number of MCTs in the system.
+
+ IN SPD_DEF_STRUCT *SpdDataStructure; ///< Pointer to SPD Data structure
+
+ IN OUT struct _PLATFORM_CONFIGURATION *PlatFormConfig; ///< Platform profile/build option config structure
+
+ IN OUT BOOLEAN IsFlowControlSupported; ///< Indicates if flow control is supported
+
+ OUT UINT32 TscRate; ///< The rate at which the TSC increments in megahertz.
+
+} MEM_DATA_STRUCT;
+
+///
+/// Uma Structure
+///
+///
+typedef struct _UMA_INFO {
+ OUT UINT64 UmaBase; ///< UmaBase[63:0] = Addr[63:0]
+ OUT UINT32 UmaSize; ///< UmaSize[31:0] = Addr[31:0]
+ OUT UINT32 UmaAttributes; ///< Indicate the attribute of Uma
+ OUT UINT8 UmaMode; ///< Indicate the mode of Uma
+ OUT UINT16 MemClock; ///< Indicate memory running speed in MHz
+ OUT UINT8 MemType; ///< Indicate the DRAM technology type that is being used
+ OUT UINT8 Reserved[2]; ///< Reserved for future usage
+} UMA_INFO;
+
+/// Bitfield for ID
+typedef struct {
+ OUT UINT16 SocketId:8; ///< Socket ID
+ OUT UINT16 ModuleId:8; ///< Module ID
+} ID_FIELD;
+///
+/// Union for ID of socket and module that will be passed out in call out
+///
+typedef union {
+ OUT ID_FIELD IdField; ///< Bitfield for ID
+ OUT UINT16 IdInformation; ///< ID information for call out
+} ID_INFO;
+
+// AGESA MEMORY ERRORS
+
+// AGESA_SUCCESS memory events
+#define MEM_EVENT_CAPSULE_IN_EFFECT 0x04013600ul ///< Capsule is in effect
+#define MEM_EVENT_CONTEXT_RESTORE_IN_EFFECT 0x04023600ul ///< Context restore is in effect
+
+// AGESA_ALERT Memory Errors
+#define MEM_ALERT_USER_TMG_MODE_OVERRULED 0x04010000ul ///< TIMING_MODE_SPECIFIC is requested but
+ ///< cannot be applied to current configurations.
+#define MEM_ALERT_ORG_MISMATCH_DIMM 0x04010100ul ///< DIMM organization miss-match
+#define MEM_ALERT_BK_INT_DIS 0x04010200ul ///< Bank interleaving disable for internal issue
+
+// AGESA_ERROR Memory Errors
+#define MEM_ERROR_NO_DQS_POS_RD_WINDOW 0x04010300ul ///< No DQS Position window for RD DQS
+#define MEM_ERROR_SMALL_DQS_POS_RD_WINDOW 0x04020300ul ///< Small DQS Position window for RD DQS
+#define MEM_ERROR_NO_DQS_POS_WR_WINDOW 0x04030300ul ///< No DQS Position window for WR DQS
+#define MEM_ERROR_SMALL_DQS_POS_WR_WINDOW 0x04040300ul ///< Small DQS Position window for WR DQS
+#define MEM_ERROR_DIMM_SPARING_NOT_ENABLED 0x04010500ul ///< DIMM sparing has not been enabled for an internal issues
+#define MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE 0x04050300ul ///< Receive Enable value is too large
+#define MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW 0x04060300ul ///< There is no DQS receiver enable window
+#define MEM_ERROR_DRAM_ENABLED_TIME_OUT 0x04010600ul ///< Time out when polling DramEnabled bit
+#define MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT 0x04010700ul ///< Time out when polling DctAccessDone bit
+#define MEM_ERROR_SEND_CTRL_WORD_TIME_OUT 0x04010800ul ///< Time out when polling SendCtrlWord bit
+#define MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT 0x04010900ul ///< Time out when polling PrefDramTrainMode bit
+#define MEM_ERROR_ENTER_SELF_REF_TIME_OUT 0x04010A00ul ///< Time out when polling EnterSelfRef bit
+#define MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT 0x04010B00ul ///< Time out when polling FreqChgInProg bit
+#define MEM_ERROR_EXIT_SELF_REF_TIME_OUT 0x04020A00ul ///< Time out when polling ExitSelfRef bit
+#define MEM_ERROR_SEND_MRS_CMD_TIME_OUT 0x04010C00ul ///< Time out when polling SendMrsCmd bit
+#define MEM_ERROR_SEND_ZQ_CMD_TIME_OUT 0x04010D00ul ///< Time out when polling SendZQCmd bit
+#define MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT 0x04010E00ul ///< Time out when polling DctExtraAccessDone bit
+#define MEM_ERROR_MEM_CLR_BUSY_TIME_OUT 0x04010F00ul ///< Time out when polling MemClrBusy bit
+#define MEM_ERROR_MEM_CLEARED_TIME_OUT 0x04020F00ul ///< Time out when polling MemCleared bit
+#define MEM_ERROR_FLUSH_WR_TIME_OUT 0x04011000ul ///< Time out when polling FlushWr bit
+#define MEM_ERROR_NBPSTATE_TRANSITION_TIME_OUT 0x04012600ul ///< Time out when polling CurNBPstate bit
+#define MEM_ERROR_MAX_LAT_NO_WINDOW 0x04070300ul ///< Fail to find pass during Max Rd Latency training
+#define MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL 0x04080300ul ///< Fail to launch training code on an AP
+#define MEM_ERROR_PARALLEL_TRAINING_TIME_OUT 0x04090300ul ///< Fail to finish parallel training
+#define MEM_ERROR_NO_ADDRESS_MAPPING 0x04011100ul ///< No address mapping found for a dimm
+#define MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT 0x040A0300ul ///< There is no DQS receiver enable window and the value is equal to the largest value
+#define MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE 0x040B0300ul ///< Receive Enable value is too large and is 1 less than limit
+#define MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR 0x04011200ul ///< SPD Checksum error for NV_SPDCHK_RESTRT
+#define MEM_ERROR_NO_CHIPSELECT 0x04011300ul ///< No chipselects found
+#define MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM 0x04011500ul ///< Unbuffered dimm is not supported at 333MHz
+#define MEM_ERROR_WL_PRE_OUT_OF_RANGE 0x040C0300ul ///< Returned PRE value during write levelizzation was out of range
+#define MEM_ERROR_NO_2D_RDDQS_WINDOW 0x040D0300ul ///< No 2D RdDqs Window
+#define MEM_ERROR_NO_2D_RDDQS_HEIGHT 0x040E0300ul ///< No 2D RdDqs Height
+#define MEM_ERROR_2D_DQS_ERROR 0x040F0300ul ///< 2d RdDqs Error
+#define MEM_ERROR_INVALID_2D_RDDQS_VALUE 0x04022400ul ///< 2d RdDqs invalid value found
+#define MEM_ERROR_2D_DQS_VREF_MARGIN_ERROR 0x04023400ul ///< 2d RdDqs Vef Margin error found
+#define MEM_ERROR_LR_IBT_NOT_FOUND 0x04013500ul ///< No LR dimm IBT value is found
+#define MEM_ERROR_MR0_NOT_FOUND 0x04023500ul ///< No MR0 value is found
+#define MEM_ERROR_ODT_PATTERN_NOT_FOUND 0x04033500ul ///< No odt pattern value is found
+#define MEM_ERROR_RC2_IBT_NOT_FOUND 0x04043500ul ///< No RC2 IBT value is found
+#define MEM_ERROR_RC10_OP_SPEED_NOT_FOUND 0x04053500ul ///< No RC10 op speed is found
+#define MEM_ERROR_RTT_NOT_FOUND 0x04063500ul ///< No RTT value is found
+#define MEM_ERROR_P2D_NOT_FOUND 0x04073500ul ///< No 2D training config value is found
+#define MEM_ERROR_SAO_NOT_FOUND 0x04083500ul ///< No slow access mode, Address timing and Output driver compensation value is found
+#define MEM_ERROR_CLK_DIS_MAP_NOT_FOUND 0x04093500ul ///< No CLK disable map is found
+#define MEM_ERROR_CKE_TRI_MAP_NOT_FOUND 0x040A3500ul ///< No CKE tristate map is found
+#define MEM_ERROR_ODT_TRI_MAP_NOT_FOUND 0x040B3500ul ///< No ODT tristate map is found
+#define MEM_ERROR_CS_TRI_MAP_NOT_FOUND 0x040C3500ul ///< No CS tristate map is found
+#define MEM_ERROR_TRAINING_SEED_NOT_FOUND 0x040D3500ul ///< No training seed is found
+#define MEM_ERROR_NO_2D_WRDAT_WINDOW 0x040D0400ul ///< No 2D WrDat Window
+#define MEM_ERROR_NO_2D_WRDAT_HEIGHT 0x040E0400ul ///< No 2D WrDat Height
+#define MEM_ERROR_2D_WRDAT_ERROR 0x040F0400ul ///< 2d WrDat Error
+#define MEM_ERROR_INVALID_2D_WRDAT_VALUE 0x04100400ul ///< 2d WrDat invalid value found
+#define MEM_ERROR_2D_WRDAT_VREF_MARGIN_ERROR 0x04110400ul ///< 2d WrDat Vef Margin error found
+
+// AGESA_WARNING Memory Errors
+#define MEM_WARNING_UNSUPPORTED_QRDIMM 0x04011600ul ///< QR DIMMs detected but not supported
+#define MEM_WARNING_UNSUPPORTED_UDIMM 0x04021600ul ///< U DIMMs detected but not supported
+#define MEM_WARNING_UNSUPPORTED_SODIMM 0x04031600ul ///< SO-DIMMs detected but not supported
+#define MEM_WARNING_UNSUPPORTED_X4DIMM 0x04041600ul ///< x4 DIMMs detected but not supported
+#define MEM_WARNING_UNSUPPORTED_RDIMM 0x04051600ul ///< R DIMMs detected but not supported
+#define MEM_WARNING_UNSUPPORTED_LRDIMM 0x04061600ul ///< LR DIMMs detected but not supported
+#define MEM_WARNING_EMP_NOT_SUPPORTED 0x04011700ul ///< Processor is not capable for EMP
+#define MEM_WARNING_EMP_CONFLICT 0x04021700ul ///< EMP cannot be enabled if channel interleaving,
+#define MEM_WARNING_EMP_NOT_ENABLED 0x04031700ul ///< Memory size is not power of two.
+#define MEM_WARNING_ECC_DIS 0x04041700ul ///< ECC has been disabled as a result of an internal issue
+#define MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED 0x04011800ul ///< Performance has been enabled, but battery life is preferred.
+ ///< bank interleaving, or bank swizzle is enabled.
+#define MEM_WARNING_NO_SPDTRC_FOUND 0x04011900ul ///< No Trc timing value found in SPD of a dimm.
+#define MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED 0x04012000ul ///< Node Interleaveing Requested, but could not be enabled
+#define MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED 0x04012100ul ///< Channel Interleaveing Requested, but could not be enabled
+#define MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED 0x04012200ul ///< Bank Interleaveing Requested, but could not be enabled
+#define MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED 0x04012300ul ///< Voltage 1.35 determined, but could not be supported
+#define MEM_WARNING_INITIAL_DDR3VOLT_NONZERO 0x04012400ul ///< DDR3 voltage initial value is not 0
+#define MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO 0x04012500ul ///< Cannot find a commonly supported VDDIO
+#define MEM_WARNING_AMP_SUPPORT_DETECTED_BUT_NOT_ENABLED 0x04012900ul ///< AMP support detected but not enabled
+#define MEM_WARNING_AMP_SELECTED_BUT_NOT_ENABLED 0x04022900ul ///< AMP selected but not enabled
+
+// AGESA_FATAL Memory Errors
+#define MEM_ERROR_MINIMUM_MODE 0x04011A00ul ///< Running in minimum mode
+#define MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM 0x04011B00ul ///< DIMM modules are miss-matched
+#define MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM 0x04011C00ul ///< No DIMMs have been found
+#define MEM_ERROR_MISMATCH_DIMM_CLOCKS 0x04011D00ul ///< DIMM clocks miss-matched
+#define MEM_ERROR_NO_CYC_TIME 0x04011E00ul ///< No cycle time found
+#define MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS 0x04011F00ul ///< Heap allocation error with dynamic storing of trained timings
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs 0x04021F00ul ///< Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV 0x04031F00ul ///< Heap allocation error with REMOTE_TRAINING_ENV
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_SPD 0x04041F00ul ///< Heap allocation error for SPD data
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA 0x04051F00ul ///< Heap allocation error for RECEIVED_DATA during parallel training
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS 0x04061F00ul ///< Heap allocation error for S3 "SPECIAL_CASE_REGISTER"
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA 0x04071F00ul ///< Heap allocation error for Training Data
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK 0x04081F00ul ///< Heap allocation error for DIMM Identify "MEM_NB_BLOCK
+#define MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM 0x04022300ul ///< No Constructor for DIMM Identify
+#define MEM_ERROR_VDDIO_UNSUPPORTED 0x04022500ul ///< VDDIO of the dimms on the board is not supported
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_2D 0x040B1F00ul ///< Heap allocation error for 2D training data
+#define MEM_ERROR_HEAP_DEALLOCATE_FOR_2D 0x040C1F00ul ///< Heap de-allocation error for 2D training data
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_DATAEYE 0x040F1F00ul ///< Heap allocation error for DATAEYE Storage
+#define MEM_ERROR_HEAP_DEALLOCATE_FOR_DATAEYE 0x040E1F00ul ///< Heap de-allocation error for DATAEYE Storage
+
+// AGESA_CRITICAL Memory Errors
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 0x04091F00ul ///< Heap allocation error for DMI table for DDR3
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 0x040A1F00ul ///< Heap allocation error for DMI table for DDR2
+#define MEM_ERROR_UNSUPPORTED_DIMM_CONFIG 0x04011400ul ///< Dimm population is not supported
+#define MEM_ERROR_HEAP_ALLOCATE_FOR_CRAT_MEM_AFFINITY 0x040D1F00ul ///< Heap allocation error for CRAT memory affinity info
+
+
+
+/*----------------------------------------------------------------------------
+ *
+ * END OF MEMORY-SPECIFIC DATA STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+
+/*----------------------------------------------------------------------------
+ *
+ * CPU RELATED DEFINITIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+// CPU Event definitions.
+
+// Defines used to filter CPU events based on functional blocks
+#define CPU_EVENT_PM_EVENT_MASK 0xFF00FF00ul
+#define CPU_EVENT_PM_EVENT_CLASS 0x08000400ul
+
+//================================================================
+// CPU General events
+// Heap allocation (AppFunction = 01h)
+#define CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT 0x08000100ul
+#define CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED 0x08010100ul
+#define CPU_ERROR_HEAP_IS_FULL 0x08020100ul
+#define CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED 0x08030100ul
+#define CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT 0x08040100ul
+// BrandId (AppFunction = 02h)
+#define CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE 0x08000200ul
+// Micro code patch (AppFunction = 03h)
+#define CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED 0x08000300ul
+// Power management (AppFunction = 04h)
+#define CPU_EVENT_PM_PSTATE_OVERCURRENT 0x08000400ul
+#define CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT 0x08010400ul
+#define CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE 0x08020400ul
+#define CPU_ERROR_PM_NB_PSTATE_MISMATCH 0x08030400ul
+// TDP Limiting
+#define CPU_EVENT_TDP_LIMIT_FORCE_TO_50_PERCENTAGE 0x08060100ul
+#define CPU_ERROR_TDP_LIMIT_SAVE_PSTATE_FAIL 0x08060200ul
+#define CPU_ERROR_TDP_LIMIT_RESTORE_PSTATE_FAIL 0x08060201ul
+#define CPU_ERROR_TDP_LIMIT_TDP2WATT_IS_ZERO 0x08060202ul
+#define CPU_ERROR_TDP_LIMIT_INVALID_INPUT 0x08060203ul
+// Other CPU events (AppFunction = 05h)
+#define CPU_EVENT_BIST_ERROR 0x08000500ul
+#define CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY 0x08010500ul
+#define CPU_EVENT_STACK_REENTRY 0x08020500ul
+#define CPU_EVENT_CORE_NOT_IDENTIFIED 0x08030500ul
+
+//=================================================================
+// CPU Feature events
+// Execution cache (AppFunction = 21h)
+// AGESA_CACHE_SIZE_REDUCED 2101
+// AGESA_CACHE_REGIONS_ACROSS_1MB 2102
+// AGESA_CACHE_REGIONS_ACROSS_4GB 2103
+// AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104
+// AGESA_CACHE_START_ADDRESS_LESS_D0000 2105
+// AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106
+// AGESA_DEALLOCATE_CACHE_REGIONS 2107
+#define CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR 0x08002100ul
+// Core Leveling (AppFunction = 22h)
+#define CPU_WARNING_ADJUSTED_LEVELING_MODE 0x08002200ul
+// HT Assist (AppFunction = 23h)
+#define CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG 0x08002300ul
+// SCS initialization (AppFunction = 24h)
+// AGESA_SCS_HEAP_ENTRY_MISSING 2401
+// AGESA_SCS_BUFFER_EMPTY 2402
+// AGESA_SCS_WEIGHTS_MISMATCH 2403
+#define CPU_EVENT_SCS_INITIALIZATION_ERROR 0x08002400ul
+
+// CPU Build Configuration structures and definitions
+
+/// Build Configuration structure for BLDCFG_AP_MTRR_SETTINGS
+typedef struct {
+ IN UINT32 MsrAddr; ///< Fixed-Sized MTRR address
+ IN UINT64 MsrData; ///< MTRR Settings
+} AP_MTRR_SETTINGS;
+
+#define AMD_AP_MTRR_FIX64k_00000 0x00000250ul
+#define AMD_AP_MTRR_FIX16k_80000 0x00000258ul
+#define AMD_AP_MTRR_FIX16k_A0000 0x00000259ul
+#define AMD_AP_MTRR_FIX4k_C0000 0x00000268ul
+#define AMD_AP_MTRR_FIX4k_C8000 0x00000269ul
+#define AMD_AP_MTRR_FIX4k_D0000 0x0000026Aul
+#define AMD_AP_MTRR_FIX4k_D8000 0x0000026Bul
+#define AMD_AP_MTRR_FIX4k_E0000 0x0000026Cul
+#define AMD_AP_MTRR_FIX4k_E8000 0x0000026Dul
+#define AMD_AP_MTRR_FIX4k_F0000 0x0000026Eul
+#define AMD_AP_MTRR_FIX4k_F8000 0x0000026Ful
+#define CPU_LIST_TERMINAL 0xFFFFFFFFul
+
+/// Data structure for the Mapping Item between Unified ID for IDS Setup Option
+/// and the option value.
+///
+typedef struct {
+ IN UINT16 IdsNvId; ///< Unified ID for IDS Setup Option.
+ OUT UINT16 IdsNvValue; ///< The value of IDS Setup Option.
+} IDS_NV_ITEM;
+
+/// Data Structure for IDS CallOut Function
+typedef struct {
+ IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN IDS_NV_ITEM *IdsNvPtr; ///< Memory Pointer of IDS NV Table
+ IN OUT UINTN Reserved; ///< reserved
+} IDS_CALLOUT_STRUCT;
+
+/************************************************************************
+ *
+ * AGESA interface Call-Out function parameter structures
+ *
+ ***********************************************************************/
+
+/// Parameters structure for interface call-out AgesaAllocateBuffer
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN OUT UINT32 BufferLength; ///< Size of buffer to allocate
+ IN UINT32 BufferHandle; ///< Identifier or name for the buffer
+ OUT VOID *BufferPointer; ///< location of the created buffer
+} AGESA_BUFFER_PARAMS;
+
+/// Parameters structure for interface call-out AgesaRunCodeOnAp
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN UINT32 FunctionNumber; ///< Index of the procedure to execute
+ IN VOID *RelatedDataBlock; ///< Location of data structure the procedure will use
+ IN UINT32 RelatedBlockLength; ///< Size of the related data block
+} AP_EXE_PARAMS;
+
+/// Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN UINT8 SocketId; ///< Address of SPD - socket ID
+ IN UINT8 MemChannelId; ///< Address of SPD - memory channel ID
+ IN UINT8 DimmId; ///< Address of SPD - DIMM ID
+ IN OUT UINT8 *Buffer; ///< Location where to place the SPD content
+ IN OUT MEM_DATA_STRUCT *MemData; ///< Location of the MemData structure, for reference
+} AGESA_READ_SPD_PARAMS;
+
+/// VoltageType values
+typedef enum {
+ VTYPE_CPU_VREF, ///< Cpu side Vref
+ VTYPE_DIMM_VREF, ///< Dimm Side Vref
+ VTYPE_VDDIO ///< Vddio
+} VTYPE;
+
+/// Parameters structure for the interface call-out AgesaExternalVoltageAdjust
+typedef struct _VOLTAGE_ADJUST {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN OUT MEM_DATA_STRUCT *MemData; ///< Location of the MemData structure, for reference
+ IN VTYPE VoltageType; ///< Which Voltage Type to adjust
+ IN INT8 AdjustValue; ///< Positive/Negative Adjust Value
+} VOLTAGE_ADJUST;
+
+/// Buffer Handles
+typedef enum {
+ AMD_DMI_INFO_BUFFER_HANDLE = 0x000D000, ///< Assign 0x000D000 buffer handle to DMI function
+ AMD_PSTATE_DATA_BUFFER_HANDLE, ///< Assign 0x000D001 buffer handle to Pstate data
+ AMD_PSTATE_ACPI_BUFFER_HANDLE, ///< Assign 0x000D002 buffer handle to Pstate table
+ AMD_BRAND_ID_BUFFER_HANDLE, ///< Assign 0x000D003 buffer handle to Brand ID
+ AMD_ACPI_SLIT_BUFFER_HANDLE, ///< Assign 0x000D004 buffer handle to SLIT function
+ AMD_SRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000D005 buffer handle to SRAT function
+ AMD_WHEA_BUFFER_HANDLE, ///< Assign 0x000D006 buffer handle to WHEA function
+ AMD_S3_INFO_BUFFER_HANDLE, ///< Assign 0x000D007 buffer handle to S3 function
+ AMD_S3_NB_INFO_BUFFER_HANDLE, ///< Assign 0x000D008 buffer handle to S3 NB device info
+ AMD_ACPI_ALIB_BUFFER_HANDLE, ///< Assign 0x000D009 buffer handle to ALIB SSDT table
+ AMD_ACPI_IVRS_BUFFER_HANDLE, ///< Assign 0x000D00A buffer handle to IOMMU IVRS table
+ AMD_CRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000D00B buffer handle to CRAT function
+ AMD_ACPI_CDIT_BUFFER_HANDLE ///< Assign 0x000D00C buffer handle to CDIT function
+} AMD_BUFFER_HANDLE;
+
+
+/************************************************************************
+ *
+ * AGESA interface Call-Out function prototypes
+ *
+ ***********************************************************************/
+
+VOID
+AgesaDoReset (
+ IN UINTN ResetType,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+AgesaAllocateBuffer (
+ IN UINTN FcnData,
+ IN OUT AGESA_BUFFER_PARAMS *AllocParams
+ );
+
+AGESA_STATUS
+AgesaDeallocateBuffer (
+ IN UINTN FcnData,
+ IN OUT AGESA_BUFFER_PARAMS *DeallocParams
+ );
+
+AGESA_STATUS
+AgesaLocateBuffer (
+ IN UINTN FcnData,
+ IN OUT AGESA_BUFFER_PARAMS *LocateParams
+ );
+
+AGESA_STATUS
+AgesaReadSpd (
+ IN UINTN FcnData,
+ IN OUT AGESA_READ_SPD_PARAMS *ReadSpd
+ );
+
+AGESA_STATUS
+AgesaReadSpdRecovery (
+ IN UINTN FcnData,
+ IN OUT AGESA_READ_SPD_PARAMS *ReadSpd
+ );
+
+AGESA_STATUS
+AgesaHookBeforeDramInitRecovery (
+ IN UINTN FcnData,
+ IN OUT MEM_DATA_STRUCT *MemData
+ );
+
+AGESA_STATUS
+AgesaRunFcnOnAp (
+ IN UINTN ApicIdOfCore,
+ IN AP_EXE_PARAMS *LaunchApParams
+ );
+
+AGESA_STATUS
+AgesaHookBeforeDramInit (
+ IN UINTN SocketIdModuleId,
+ IN OUT MEM_DATA_STRUCT *MemData
+ );
+
+AGESA_STATUS
+AgesaHookBeforeDQSTraining (
+ IN UINTN SocketIdModuleId,
+ IN OUT MEM_DATA_STRUCT *MemData
+ );
+
+AGESA_STATUS
+AgesaHookBeforeExitSelfRefresh (
+ IN UINTN FcnData,
+ IN OUT MEM_DATA_STRUCT *MemData
+ );
+
+AGESA_STATUS
+AgesaPcieSlotResetControl (
+ IN UINTN FcnData,
+ IN PCIe_SLOT_RESET_INFO *ResetInfo
+ );
+
+AGESA_STATUS
+AgesaGetVbiosImage (
+ IN UINTN FcnData,
+ IN OUT GFX_VBIOS_IMAGE_INFO *VbiosImageInfo
+ );
+
+AGESA_STATUS
+AgesaFchOemCallout (
+ IN VOID *FchData
+ );
+
+AGESA_STATUS
+AgesaExternal2dTrainVrefChange (
+ IN UINTN SocketIdModuleId,
+ IN OUT MEM_DATA_STRUCT *MemData
+ );
+
+AGESA_STATUS
+AgesaGetIdsData (
+ IN UINTN Data,
+ IN OUT IDS_CALLOUT_STRUCT *IdsCalloutData
+ );
+
+AGESA_STATUS
+AgesaExternalVoltageAdjust (
+ IN UINTN SocketIdModuleId,
+ IN OUT VOLTAGE_ADJUST *AdjustValue
+ );
+/************************************************************************
+ *
+ * AGESA interface structure definition and function prototypes
+ *
+ ***********************************************************************/
+
+/**********************************************************************
+ * Platform Configuration: The parameters in boot branch function
+ **********************************************************************/
+
+/// The possible platform control flow settings.
+typedef enum {
+ Nfcm, ///< Normal Flow Control Mode.
+ UmaDr, ///< UMA using Display Refresh flow control.
+ UmaIfcm, ///< UMA using Isochronous Flow Control.
+ Ifcm, ///< Isochronous Flow Control Mode (other than for UMA).
+ Iommu, ///< An IOMMU is in use in the system.
+ MaxControlFlow ///< Not a control flow mode, use for limit checking.
+} PLATFORM_CONTROL_FLOW;
+
+/// Platform Deemphasis Levels.
+///
+/// The deemphasis level is set for the receiver, based on link characterization. The DCV level is
+/// set based on the level of the far transmitter.
+typedef enum {
+ DeemphasisLevelNone, ///< No Deemphasis.
+ DeemphasisLevelMinus3, ///< Minus 3 db deemphasis.
+ DeemphasisLevelMinus6, ///< Minus 6 db deemphasis.
+ DeemphasisLevelMinus8, ///< Minus 8 db deemphasis.
+ DeemphasisLevelMinus11, ///< Minus 11 db deemphasis.
+ DeemphasisLevelMinus11pre8, ///< Minus 11, Minus 8 precursor db deemphasis.
+ DcvLevelNone = 16, ///< No DCV Deemphasis.
+ DcvLevelMinus2, ///< Minus 2 db DCV deemphasis.
+ DcvLevelMinus3, ///< Minus 3 db DCV deemphasis.
+ DcvLevelMinus5, ///< Minus 5 db DCV deemphasis.
+ DcvLevelMinus6, ///< Minus 6 db DCV deemphasis.
+ DcvLevelMinus7, ///< Minus 7 db DCV deemphasis.
+ DcvLevelMinus8, ///< Minus 8 db DCV deemphasis.
+ DcvLevelMinus9, ///< Minus 9 db DCV deemphasis.
+ DcvLevelMinus11, ///< Minus 11 db DCV deemphasis.
+ MaxPlatformDeemphasisLevel ///< Not a deemphasis level, use for limit checking.
+} PLATFORM_DEEMPHASIS_LEVEL;
+
+/// Provide Deemphasis Levels for HT Links.
+///
+/// For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will
+/// be checked for a match. The item matches for a Socket, Link if the link frequency is
+/// is in the inclusive range HighFreq:LoFreq.
+/// AGESA does not set deemphasis in IO devices, only in processors.
+
+typedef struct {
+ // Match fields
+ IN UINT8 Socket; ///< One Socket on which this Link is located
+ IN UINT8 Link; ///< The Link on this Processor.
+ IN UINT8 LoFreq; ///< If the link is set to this frequency or greater, apply these levels, and
+ IN UINT8 HighFreq; ///< If the link is set to this frequency or less, apply these levels.
+ // Value fields
+ IN PLATFORM_DEEMPHASIS_LEVEL ReceiverDeemphasis; ///< The deemphasis level for this link
+ IN PLATFORM_DEEMPHASIS_LEVEL DcvDeemphasis; ///< The DCV, or far transmitter deemphasis level.
+} CPU_HT_DEEMPHASIS_LEVEL;
+
+
+/// The possible hardware prefetch mode settings.
+typedef enum {
+ HARDWARE_PREFETCHER_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled.
+ DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES, ///< Use the recommended setting for the hardware prefetcher, but disable training on software prefetches.
+ DISABLE_L1_PREFETCHER, ///< Use the recommended settings for the hardware prefetcher, but disable L1 prefetching and above.
+ DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES, ///< (deprecated) - This setting is deprecated; it has the same effect as DISABLE_L1_PREFETCHER
+ DISABLE_L2_STRIDE_PREFETCHER, ///< Use the recommended settings for the hardware prefetcher, but disable the L2 stride prefetcher and above
+ DISABLE_HARDWARE_PREFETCH, ///< Disable hardware prefetching.
+ MAX_HARDWARE_PREFETCH_MODE ///< Not a hardware prefetch mode, use for limit checking.
+} HARDWARE_PREFETCH_MODE;
+
+/// The possible software prefetch mode settings.
+typedef enum {
+ SOFTWARE_PREFETCHES_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled.
+ DISABLE_SOFTWARE_PREFETCHES, ///< Disable software prefetches (convert software prefetch instructions to NOP).
+ MAX_SOFTWARE_PREFETCH_MODE ///< Not a software prefetch mode, use for limit checking.
+} SOFTWARE_PREFETCH_MODE;
+
+/// Advanced performance tunings, prefetchers.
+/// These settings provide for performance tuning to optimize for specific workloads.
+typedef struct {
+ IN HARDWARE_PREFETCH_MODE HardwarePrefetchMode; ///< This value provides for advanced performance tuning by controlling the hardware prefetcher setting.
+ IN SOFTWARE_PREFETCH_MODE SoftwarePrefetchMode; ///< This value provides for advanced performance tuning by controlling the software prefetch instructions.
+ IN DRAM_PREFETCH_MODE DramPrefetchMode; ///< This value provides for advanced performance tuning by controlling the DRAM prefetcher setting.
+} ADVANCED_PERFORMANCE_PROFILE;
+
+/// The possible platform power policy settings.
+typedef enum {
+ Performance, ///< Optimize for performance.
+ BatteryLife, ///< Optimize for battery life.
+ MaxPowerPolicy ///< Not a power policy mode, use for limit checking.
+} PLATFORM_POWER_POLICY;
+
+/// Platform performance settings for optimized settings.
+/// Several configuration settings for the processor depend upon other parts and
+/// general designer choices for the system. The determination of these data points
+/// is not standard for all platforms, so the host environment needs to provide these
+/// to specify how the system is to be configured.
+typedef struct {
+ IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode; ///< The platform's control flow mode for optimum platform performance.
+ ///< @BldCfgItem{BLDCFG_PLATFORM_CONTROL_FLOW_MODE}
+ IN BOOLEAN UseHtAssist; ///< HyperTransport link traffic optimization.
+ ///< @BldCfgItem{BLDCFG_USE_HT_ASSIST}
+ IN BOOLEAN UseAtmMode; ///< HyperTransport link traffic optimization.
+ ///< @BldCfgItem{BLDCFG_USE_ATM_MODE}
+ IN BOOLEAN UseNeighborCache; ///< Neighbor cache mode.
+ ///< @BldCfgItem{BLDCFG_USE_NEIGHBOR_CACHE}
+ IN BOOLEAN Use32ByteRefresh; ///< Display Refresh traffic generates 32 byte requests.
+ ///< @BldCfgItem{BLDCFG_USE_32_BYTE_REFRESH}
+ IN BOOLEAN UseVariableMctIsocPriority; ///< The Memory controller will be set to Variable Isoc Priority.
+ ///< @BldCfgItem{BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY}
+ IN ADVANCED_PERFORMANCE_PROFILE AdvancedPerformanceProfile; ///< The advanced platform performance settings.
+ IN PLATFORM_POWER_POLICY PlatformPowerPolicy; ///< The platform's desired power policy
+ ///< @BldCfgItem{BLDCFG_PLATFORM_POWER_POLICY_MODE}
+ IN BOOLEAN NbPstatesSupported; ///< The Nb-Pstates is supported or not
+ ///< @BldCfgItem{BLDCFG_NB_PSTATES_SUPPORTED}
+} PERFORMANCE_PROFILE;
+
+/// Platform settings that describe the voltage regulator modules of the system.
+/// Many power management settings are dependent upon the characteristics of the
+/// on-board voltage regulator module (VRM). The host environment needs to provide
+/// these to specify how the system is to be configured.
+typedef struct {
+ IN UINT32 CurrentLimit; ///< Vrm Current Limit.
+ ///< @BldCfgItem{BLDCFG_VRM_CURRENT_LIMIT}
+ ///< @BldCfgItem{BLDCFG_VRM_NB_CURRENT_LIMIT}
+ IN UINT32 LowPowerThreshold; ///< Vrm Low Power Threshold.
+ ///< @BldCfgItem{BLDCFG_VRM_LOW_POWER_THRESHOLD}
+ ///< @BldCfgItem{BLDCFG_VRM_NB_LOW_POWER_THRESHOLD}
+ IN UINT32 SlewRate; ///< Vrm Slew Rate.
+ ///< @BldCfgItem{BLDCFG_VRM_SLEW_RATE}
+ ///< @BldCfgItem{BLDCFG_VRM_NB_SLEW_RATE}
+ IN BOOLEAN HiSpeedEnable; ///< Select high speed VRM.
+ ///< @BldCfgItem{BLDCFG_VRM_HIGH_SPEED_ENABLE}
+ ///< @BldCfgItem{BLDCFG_VRM_NB_HIGH_SPEED_ENABLE}
+ IN UINT32 MaximumCurrentLimit; ///< Vrm Maximum Current Limit.
+ ///< @BldCfgItem{BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT}
+ ///< @BldCfgItem{BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT}
+ IN UINT32 SviOcpLevel; ///< SVI OCP Level.
+ ///< @BldCfgItem{BLDCFG_VRM_SVI_OCP_LEVEL}
+ ///< @BldCfgItem{BLDCFG_VRM_NB_SVI_OCP_LEVEL}
+} PLATFORM_VRM_CONFIGURATION;
+
+/// The VRM types to characterize.
+typedef enum {
+ CoreVrm, ///< VDD plane.
+ NbVrm, ///< VDDNB plane.
+ MaxVrmType ///< Not a valid VRM type, use for limit checking.
+} PLATFORM_VRM_TYPE;
+
+
+/// FCH Platform Configuration Policy
+typedef struct {
+ IN UINT16 CfgSmbus0BaseAddress; ///< SMBUS0 Controller Base Address
+ IN UINT16 CfgSmbus1BaseAddress; ///< SMBUS1 Controller Base Address
+ IN UINT16 CfgSioPmeBaseAddress; ///< I/O base address for LPC I/O target range
+ IN UINT16 CfgAcpiPm1EvtBlkAddr; ///< I/O base address of ACPI power management Event Block
+ IN UINT16 CfgAcpiPm1CntBlkAddr; ///< I/O base address of ACPI power management Control Block
+ IN UINT16 CfgAcpiPmTmrBlkAddr; ///< I/O base address of ACPI power management Timer Block
+ IN UINT16 CfgCpuControlBlkAddr; ///< I/O base address of ACPI power management CPU Control Block
+ IN UINT16 CfgAcpiGpe0BlkAddr; ///< I/O base address of ACPI power management General Purpose Event Block
+ IN UINT16 CfgSmiCmdPortAddr; ///< I/O base address of ACPI SMI Command Block
+ IN UINT16 CfgAcpiPmaCntBlkAddr; ///< I/O base address of ACPI power management additional control block
+ IN UINT32 CfgGecShadowRomBase; ///< 32-bit base address to the GEC shadow ROM
+ IN UINT32 CfgWatchDogTimerBase; ///< Watchdog Timer base address
+ IN UINT32 CfgSpiRomBaseAddress; ///< Base address for the SPI ROM controller
+ IN UINT32 CfgHpetBaseAddress; ///< HPET MMIO base address
+ IN UINT32 CfgAzaliaSsid;
+ IN UINT32 CfgSmbusSsid; ///< Subsystem ID of SMBUS controller
+ IN UINT32 CfgIdeSsid; ///< Subsystem ID of IDE controller
+ IN UINT32 CfgSataAhciSsid; ///< Subsystem ID of SATA controller in AHCI mode
+ IN UINT32 CfgSataIdeSsid; ///< Subsystem ID of SATA controller in IDE mode
+ IN UINT32 CfgSataRaid5Ssid; ///< Subsystem ID of SATA controller in RAID5 mode
+ IN UINT32 CfgSataRaidSsid; ///< Subsystem ID of SATA controller in RAID mode
+ IN UINT32 CfgEhciSsid; ///< Subsystem ID of EHCI
+ IN UINT32 CfgOhciSsid; ///< Subsystem ID of OHCI
+ IN UINT32 CfgLpcSsid; ///< Subsystem ID of LPC ISA Bridge
+ IN UINT32 CfgSdSsid; ///< Subsystem ID of SecureDigital controller
+ IN UINT32 CfgXhciSsid; ///< Subsystem ID of XHCI
+ IN BOOLEAN CfgFchPort80BehindPcib; ///< Is port80 cycle going to the PCI bridge
+ IN BOOLEAN CfgFchEnableAcpiSleepTrap; ///< ACPI sleep SMI enable/disable
+ IN GPP_LINKMODE CfgFchGppLinkConfig; ///< GPP link configuration
+ IN BOOLEAN CfgFchGppPort0Present; ///< Is FCH GPP port 0 present
+ IN BOOLEAN CfgFchGppPort1Present; ///< Is FCH GPP port 1 present
+ IN BOOLEAN CfgFchGppPort2Present; ///< Is FCH GPP port 2 present
+ IN BOOLEAN CfgFchGppPort3Present; ///< Is FCH GPP port 3 present
+ IN BOOLEAN CfgFchGppPort0HotPlug; ///< Is FCH GPP port 0 hotplug capable
+ IN BOOLEAN CfgFchGppPort1HotPlug; ///< Is FCH GPP port 1 hotplug capable
+ IN BOOLEAN CfgFchGppPort2HotPlug; ///< Is FCH GPP port 2 hotplug capable
+ IN BOOLEAN CfgFchGppPort3HotPlug; ///< Is FCH GPP port 3 hotplug capable
+
+ IN UINT8 CfgFchEsataPortBitMap; ///< ESATA Port definition, eg: [0]=1, means port 0 is ESATA capable
+ IN UINT8 CfgFchIrPinControl; ///< Register bitfield describing Infrared Pin Control:
+ ///< [0] - IR Enable 0
+ ///< [1] - IR Enable 1
+ ///< [2] - IR Tx0
+ ///< [3] - IR Tx1
+ ///< [4] - IR Open Drain
+ ///< [5] - IR Enable LED
+ IN SD_CLOCK_CONTROL CfgFchSdClockControl; ///< FCH SD Clock Control
+ IN SCI_MAP_CONTROL *CfgFchSciMapControl; ///< FCH SCI Mapping Control
+ IN SATA_PHY_CONTROL *CfgFchSataPhyControl; ///< FCH SATA PHY Control
+ IN GPIO_CONTROL *CfgFchGpioControl; ///< FCH GPIO Control
+} FCH_PLATFORM_POLICY;
+
+
+/// Build Option/Configuration Boolean Structure.
+typedef struct {
+ IN AMD_CODE_HEADER VersionString; ///< AMD embedded code version string
+
+ //Build Option Area
+ IN BOOLEAN OptionUDimms; ///< @ref BLDOPT_REMOVE_UDIMMS_SUPPORT "BLDOPT_REMOVE_UDIMMS_SUPPORT"
+ IN BOOLEAN OptionRDimms; ///< @ref BLDOPT_REMOVE_RDIMMS_SUPPORT "BLDOPT_REMOVE_RDIMMS_SUPPORT"
+ IN BOOLEAN OptionLrDimms; ///< @ref BLDOPT_REMOVE_LRDIMMS_SUPPORT "BLDOPT_REMOVE_LRDIMMS_SUPPORT"
+ IN BOOLEAN OptionEcc; ///< @ref BLDOPT_REMOVE_ECC_SUPPORT "BLDOPT_REMOVE_ECC_SUPPORT"
+ IN BOOLEAN OptionBankInterleave; ///< @ref BLDOPT_REMOVE_BANK_INTERLEAVE "BLDOPT_REMOVE_BANK_INTERLEAVE"
+ IN BOOLEAN OptionDctInterleave; ///< @ref BLDOPT_REMOVE_DCT_INTERLEAVE "BLDOPT_REMOVE_DCT_INTERLEAVE"
+ IN BOOLEAN OptionNodeInterleave; ///< @ref BLDOPT_REMOVE_NODE_INTERLEAVE "BLDOPT_REMOVE_NODE_INTERLEAVE"
+ IN BOOLEAN OptionParallelTraining; ///< @ref BLDOPT_REMOVE_PARALLEL_TRAINING "BLDOPT_REMOVE_PARALLEL_TRAINING"
+ IN BOOLEAN OptionOnlineSpare; ///< @ref BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT "BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT"
+ IN BOOLEAN OptionMemRestore; ///< @ref BLDOPT_REMOVE_MEM_RESTORE_SUPPORT "BLDOPT_REMOVE_MEM_RESTORE_SUPPORT"
+ IN BOOLEAN OptionMultisocket; ///< @ref BLDOPT_REMOVE_MULTISOCKET_SUPPORT "BLDOPT_REMOVE_MULTISOCKET_SUPPORT"
+ IN BOOLEAN OptionAcpiPstates; ///< @ref BLDOPT_REMOVE_ACPI_PSTATES "BLDOPT_REMOVE_ACPI_PSTATES"
+ IN BOOLEAN OptionPStatesInHpcMode; ///< @ref BLDCFG_PSTATE_HPC_MODE "BLDCFG_PSTATE_HPC_MODE"
+ IN BOOLEAN OptionCrat; ///< @ref BLDOPT_REMOVE_CRAT "BLDOPT_REMOVE_CRAT"
+ IN BOOLEAN OptionCdit; ///< @ref BLDOPT_REMOVE_CDIT "BLDOPT_REMOVE_CDIT"
+ IN BOOLEAN OptionSrat; ///< @ref BLDOPT_REMOVE_SRAT "BLDOPT_REMOVE_SRAT"
+ IN BOOLEAN OptionSlit; ///< @ref BLDOPT_REMOVE_SLIT "BLDOPT_REMOVE_SLIT"
+ IN BOOLEAN OptionWhea; ///< @ref BLDOPT_REMOVE_WHEA "BLDOPT_REMOVE_WHEA"
+ IN BOOLEAN OptionDmi; ///< @ref BLDOPT_REMOVE_DMI "BLDOPT_REMOVE_DMI"
+ IN BOOLEAN OptionEarlySamples; ///< @ref BLDOPT_REMOVE_EARLY_SAMPLES "BLDOPT_REMOVE_EARLY_SAMPLES"
+ IN BOOLEAN OptionAddrToCsTranslator; ///< ADDR_TO_CS_TRANSLATOR
+
+ //Build Configuration Area
+ IN UINT64 CfgPciMmioAddress; ///< Pci Mmio Base Address to use for PCI Config accesses.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCI_MMIO_BASE}
+ IN UINT32 CfgPciMmioSize; ///< Pci Mmio region Size.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCI_MMIO_SIZE}
+ IN PLATFORM_VRM_CONFIGURATION CfgPlatVrmCfg[MaxVrmType]; ///< Several configuration settings for the voltage regulator modules.
+ IN UINT32 CfgPlatNumIoApics; ///< The number of IO APICS for the platform.
+ IN UINT32 CfgMemInitPstate; ///< Memory Init Pstate.
+ IN PLATFORM_C1E_MODES CfgPlatformC1eMode; ///< Select the C1e Mode that will used.
+ IN UINT32 CfgPlatformC1eOpData; ///< An IO port or additional C1e setup data, depends on C1e mode.
+ IN UINT32 CfgPlatformC1eOpData1; ///< An IO port or additional C1e setup data, depends on C1e mode.
+ IN UINT32 CfgPlatformC1eOpData2; ///< An IO port or additional C1e setup data, depends on C1e mode.
+ IN UINT32 CfgPlatformC1eOpData3; ///< An IO port or additional C1e setup data, depends on C1e mode.
+ IN PLATFORM_CSTATE_MODES CfgPlatformCStateMode; ///< Select the C-State Mode that will used.
+ IN UINT32 CfgPlatformCStateOpData; ///< An IO port or additional C-State setup data, depends on C-State mode.
+ IN UINT16 CfgPlatformCStateIoBaseAddress; ///< Specifies I/O ports that can be used to allow CPU to enter CStates
+ IN PLATFORM_CPB_MODES CfgPlatformCpbMode; ///< Enable or disable core performance boost
+ IN PLATFORM_LOW_POWER_PSTATE_MODES CfgLowPowerPstateForProcHot; ///< Low power Pstate for PROCHOT mode
+ IN UINT32 CfgCoreLevelingMode; ///< Apply any downcoring or core count leveling as specified.
+ IN PERFORMANCE_PROFILE CfgPerformanceProfile; ///< The platform's control flow mode and platform performance settings.
+ IN CPU_HT_DEEMPHASIS_LEVEL *CfgPlatformDeemphasisList; ///< Deemphasis levels for the platform's HT links.
+
+ IN UINT32 CfgAmdPlatformType; ///< Designate the platform as a Server, Desktop, or Mobile.
+ IN UINT32 CfgAmdPowerCeiling; ///< PowerCeiling, specifies a maximum power usage limit for the platform
+ IN UINT16 CfgHtcTemperatureLimit; ///< Hardware Thermal Control temperature limit in tenths of degrees Celsius.
+ IN UINT16 CfgLhtcTemperatureLimit; ///< Local Hardware Thermal Control temperature limit in tenths of degrees Celsius.
+
+ IN UINT32 CfgMemoryBusFrequencyLimit; ///< Memory Bus Frequency Limit.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT}
+ IN BOOLEAN CfgMemoryModeUnganged; ///< Memory Mode Unganged.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_MODE_UNGANGED}
+ IN BOOLEAN CfgMemoryQuadRankCapable; ///< Memory Quad Rank Capable.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUAD_RANK_CAPABLE}
+ IN UINT32 CfgMemoryQuadrankType; ///< Memory Quadrank Type.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUADRANK_TYPE}
+ IN BOOLEAN CfgMemoryRDimmCapable; ///< Memory RDIMM Capable.
+ IN BOOLEAN CfgMemoryLRDimmCapable; ///< Memory LRDIMM Capable.
+ IN BOOLEAN CfgMemoryUDimmCapable; ///< Memory UDIMM Capable.
+ IN BOOLEAN CfgMemorySODimmCapable; ///< Memory SODimm Capable.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_SODIMM_CAPABLE}
+ IN BOOLEAN CfgLimitMemoryToBelow1Tb; ///< Limit memory address space to below 1TB
+ IN BOOLEAN CfgMemoryEnableBankInterleaving; ///< Memory Enable Bank Interleaving.
+ IN BOOLEAN CfgMemoryEnableNodeInterleaving; ///< Memory Enable Node Interleaving.
+ IN BOOLEAN CfgMemoryChannelInterleaving; ///< Memory Channel Interleaving.
+ IN BOOLEAN CfgMemoryPowerDown; ///< Memory Power Down.
+ IN UINT32 CfgPowerDownMode; ///< Power Down Mode.
+ IN BOOLEAN CfgOnlineSpare; ///< Online Spare.
+ IN BOOLEAN CfgMemoryParityEnable; ///< Memory Parity Enable.
+ IN BOOLEAN CfgBankSwizzle; ///< Bank Swizzle.
+ IN UINT32 CfgTimingModeSelect; ///< Timing Mode Select.
+ IN UINT32 CfgMemoryClockSelect; ///< Memory Clock Select.
+ IN BOOLEAN CfgDqsTrainingControl; ///< Dqs Training Control.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_DQS_TRAINING_CONTROL}
+ IN BOOLEAN CfgIgnoreSpdChecksum; ///< Ignore Spd Checksum.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGNORE_SPD_CHECKSUM}
+ IN BOOLEAN CfgUseBurstMode; ///< Use Burst Mode.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_USE_BURST_MODE}
+ IN BOOLEAN CfgMemoryAllClocksOn; ///< Memory All Clocks On.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_ALL_CLOCKS_ON}
+ IN BOOLEAN CfgEnableEccFeature; ///< Enable ECC Feature.
+ IN BOOLEAN CfgEccRedirection; ///< ECC Redirection.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_REDIRECTION}
+ IN UINT16 CfgScrubDramRate; ///< Scrub Dram Rate.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DRAM_RATE}
+ IN UINT16 CfgScrubL2Rate; ///< Scrub L2Rate.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L2_RATE}
+ IN UINT16 CfgScrubL3Rate; ///< Scrub L3Rate.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L3_RATE}
+ IN UINT16 CfgScrubIcRate; ///< Scrub Ic Rate.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_IC_RATE}
+ IN UINT16 CfgScrubDcRate; ///< Scrub Dc Rate.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DC_RATE}
+ IN BOOLEAN CfgEccSyncFlood; ///< ECC Sync Flood.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYNC_FLOOD}
+ IN UINT16 CfgEccSymbolSize; ///< ECC Symbol Size.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYMBOL_SIZE}
+ IN UINT64 CfgHeapDramAddress; ///< Heap contents will be temporarily stored in this address during the transition.
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_HEAP_DRAM_ADDRESS}
+ IN BOOLEAN CfgNodeMem1GBAlign; ///< Node Mem 1GB boundary Alignment
+ IN BOOLEAN CfgS3LateRestore; ///< S3 Late Restore
+ IN BOOLEAN CfgAcpiPstateIndependent; ///< PSD method dependent/Independent
+ IN UINT32 CfgAcpiPstatesPsdPolicy; ///< PSD policy
+ IN AP_MTRR_SETTINGS *CfgApMtrrSettingsList; ///< The AP's MTRR settings before final halt
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_AP_MTRR_SETTINGS_LIST}
+ IN UMA_MODE CfgUmaMode; ///< Uma Mode
+ IN UINT32 CfgUmaSize; ///< Uma Size [31:0]=Addr[47:16]
+ IN BOOLEAN CfgUmaAbove4G; ///< Uma Above 4G Support
+ IN UMA_ALIGNMENT CfgUmaAlignment; ///< Uma alignment
+ IN BOOLEAN CfgProcessorScopeInSb; ///< ACPI Processor Object in \\_SB scope
+ IN CHAR8 CfgProcessorScopeName0; ///< OEM specific 1st character of processor scope name.
+ IN CHAR8 CfgProcessorScopeName1; ///< OEM specific 2nd character of processor scope name.
+ IN UINT8 CfgGnbHdAudio; ///< GNB HD Audio
+ IN UINT8 CfgAbmSupport; ///< Abm Support
+ IN UINT8 CfgDynamicRefreshRate; ///< DRR Dynamic Refresh Rate
+ IN UINT16 CfgLcdBackLightControl; ///< LCD Backlight Control
+ IN UINT8 CfgGnb3dStereoPinIndex; ///< 3D Stereo Pin ID.
+ IN UINT32 CfgTempPcieMmioBaseAddress; ///< Temp pcie MMIO base Address
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_TEMP_PCIE_MMIO_BASE_ADDRESS}
+ IN UINT32 CfgGnbIGPUSSID; ///< Gnb internal GPU SSID
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGPU_SUBSYSTEM_ID}
+ IN UINT32 CfgGnbHDAudioSSID; ///< Gnb HD Audio SSID
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID}
+ IN UINT32 CfgGnbPcieSSID; ///< Gnb PCIe SSID
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_APU_PCIE_PORTS_SUBSYSTEM_ID}
+ IN UINT16 CfgLvdsSpreadSpectrum; ///< Lvds Spread Spectrum
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM}
+ IN UINT16 CfgLvdsSpreadSpectrumRate; ///< Lvds Spread Spectrum Rate
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE}
+ IN FCH_PLATFORM_POLICY *FchBldCfg; ///< FCH platform build configuration policy
+
+ IN BOOLEAN CfgIommuSupport; ///< IOMMU support
+ IN UINT8 CfgLvdsPowerOnSeqDigonToDe; ///< Panel initialization timing
+ IN UINT8 CfgLvdsPowerOnSeqDeToVaryBl; ///< Panel initialization timing
+ IN UINT8 CfgLvdsPowerOnSeqDeToDigon; ///< Panel initialization timing
+ IN UINT8 CfgLvdsPowerOnSeqVaryBlToDe; ///< Panel initialization timing
+ IN UINT8 CfgLvdsPowerOnSeqOnToOffDelay; ///< Panel initialization timing
+ IN UINT8 CfgLvdsPowerOnSeqVaryBlToBlon; ///< Panel initialization timing
+ IN UINT8 CfgLvdsPowerOnSeqBlonToVaryBl; ///< Panel initialization timing
+ IN UINT16 CfgLvdsMaxPixelClockFreq; ///< The maximum pixel clock frequency supported
+ IN UINT32 CfgLcdBitDepthControlValue; ///< The LCD bit depth control settings
+ IN UINT8 CfgLvds24bbpPanelMode; ///< The LVDS 24 BBP mode
+ IN LVDS_MISC_CONTROL CfgLvdsMiscControl; ///< THe LVDS Misc control
+ IN UINT16 CfgPcieRefClkSpreadSpectrum; ///< PCIe Reference Clock Spread Spectrum
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM}
+ IN BOOLEAN CfgExternalVrefCtlFeature; ///< External Vref control
+ IN FORCE_TRAIN_MODE CfgForceTrainMode; ///< Force Train Mode
+ IN BOOLEAN CfgGnbRemoteDisplaySupport; ///< Wireless Display Support
+ IN IOMMU_EXCLUSION_RANGE_DESCRIPTOR *CfgIvrsExclusionRangeList;
+ IN BOOLEAN CfgGnbSyncFloodPinAsNmi; ///< @ref BLDCFG_USE_SYNCFLOOD_AS_NMI "BLDCFG_USE_SYNCFLOOD_AS_NMI"
+ IN UINT8 CfgIgpuEnableDisablePolicy; ///< This item defines the iGPU Enable/Disable policy
+ ///< @li 0 = Auto - use current default
+ ///< @li 2 = Disable iGPU if ANY PCI or PCIe Graphics card is present
+ ///< @BldCfgItem{BLDCFG_IGPU_ENABLE_DISABLE_POLICY}
+ IN UINT8 CfgGnbSwTjOffset; ///< Software-writeable TjOffset to account for changes in junction temperature
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_GNB_THERMAL_SENSOR_CORRECTION}
+ IN UINT8 CfgLvdsMiscVoltAdjustment; ///< Register LVDS_CTRL_4 to adjust LVDS output voltage
+ ///< Build-time customizable only - @BldCfgItem{BLDCFG_LVDS_MISC_VOL_ADJUSTMENT}
+ IN DISPLAY_MISC_CONTROL CfgDisplayMiscControl; ///< The Display Misc control
+ IN DP_FIXED_VOLT_SWING_TYPE CfgDpFixedVoltSwingType;///< To indicate fixed voltage swing value
+ ///< @BldCfgItem{BLDCFG_DP_FIXED_VOLT_SWING}
+ IN TECHNOLOGY_TYPE CfgDimmTypeUsedInMixedConfig; ///< Select the preferred technology type that AGESA will enable
+ ///< when it is mixed with other technology types.
+ IN BOOLEAN CfgHybridBoostEnable; ///< HyBrid Boost support
+ ///< @BldCfgItem{BLDCFG_HYBRID_BOOST_ENABLE}
+ IN UINT64 CfgGnbIoapicAddress; ///< GNB IOAPIC Base Address(NULL if platform configured)
+ ///< @BldCfgItem{BLDCFG_GNB_IOAPIC_ADDRESS}
+ IN BOOLEAN CfgDataEyeEn; ///< Enable get 2D Data Eye
+ IN BOOLEAN CfgDockedTdpHeadroom; ///< @BldCfgItem{BLDCFG_DOCKED_TDP_HEADROOM}
+ IN BOOLEAN CfgDramDoubleRefreshRateEn; ///< Double DRAM refresh rate
+ IN BOOLEAN Reserved; ///< reserved...
+} BUILD_OPT_CFG;
+
+/// A structure containing platform specific operational characteristics. This
+/// structure is initially populated by the initializer with a copy of the same
+/// structure that was created at build time using the build configuration controls.
+typedef struct _PLATFORM_CONFIGURATION {
+ IN PERFORMANCE_PROFILE PlatformProfile; ///< Several configuration settings for the processor.
+ IN CPU_HT_DEEMPHASIS_LEVEL *PlatformDeemphasisList; ///< Deemphasis levels for the platform's HT links.
+ ///< @BldCfgItem{BLDCFG_PLATFORM_DEEMPHASIS_LIST}.
+ ///< @n @e Examples: See @ref DeemphasisExamples "Deemphasis List Examples".
+ IN UINT8 CoreLevelingMode; ///< Indicates how to balance the number of cores per processor.
+ ///< @BldCfgItem{BLDCFG_CORE_LEVELING_MODE}
+ IN PLATFORM_C1E_MODES C1eMode; ///< Specifies the method of C1e enablement - Disabled, HW, or message based.
+ ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_MODE}
+ IN UINT32 C1ePlatformData; ///< If C1eMode is HW, specifies the P_LVL3 I/O port of the platform.
+ ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_OPDATA}
+ IN UINT32 C1ePlatformData1; ///< If C1eMode is SW, specifies the address of chipset's SMI command port.
+ ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_OPDATA1}
+ IN UINT32 C1ePlatformData2; ///< If C1eMode is SW, specifies the unique number used by the SMI handler to identify SMI source.
+ ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_OPDATA2}
+ IN UINT32 C1ePlatformData3; ///< If C1eMode is Auto, specifies the P_LVL3 I/O port of the platform for HW C1e
+ ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_OPDATA3}
+ IN PLATFORM_CSTATE_MODES CStateMode; ///< Specifies the method of C-State enablement - Disabled, or C6.
+ ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_MODE}
+ IN UINT32 CStatePlatformData; ///< This element specifies some pertinent data needed for the operation of the Cstate feature
+ ///< If CStateMode is CStateModeC6, this item is reserved
+ ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_OPDATA}
+ IN UINT16 CStateIoBaseAddress; ///< This item specifies a free block of 8 consecutive bytes of I/O ports that
+ ///< can be used to allow the CPU to enter Cstates.
+ ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS}
+ IN PLATFORM_CPB_MODES CpbMode; ///< Specifies the method of core performance boost enablement - Disabled, or Auto.
+ ///< @BldCfgItem{BLDCFG_PLATFORM_CPB_MODE}
+ IN BOOLEAN UserOptionDmi; ///< When set to TRUE, the DMI data table is generated.
+ IN BOOLEAN UserOptionPState; ///< When set to TRUE, the PState data tables are generated.
+ IN BOOLEAN UserOptionCrat; ///< When set to TRUE, the CRAT data table is generated.
+ IN BOOLEAN UserOptionCdit; ///< When set to TRUE, the CDIT data table is generated.
+ IN BOOLEAN UserOptionSrat; ///< When set to TRUE, the SRAT data table is generated.
+ IN BOOLEAN UserOptionSlit; ///< When set to TRUE, the SLIT data table is generated.
+ IN BOOLEAN UserOptionWhea; ///< When set to TRUE, the WHEA data table is generated.
+ IN PLATFORM_LOW_POWER_PSTATE_MODES LowPowerPstateForProcHot; ///< Specifies the method of low power Pstate for PROCHOT enablement - Disabled, or Auto.
+ IN UINT32 PowerCeiling; ///< P-State Ceiling Enabling Deck - Max power milli-watts.
+ IN BOOLEAN ForcePstateIndependent; ///< Deprecated in favor of PstatesPsdPolicy.
+ ///< P-State _PSD is forced independent.
+ ///< @BldCfgItem{BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT}
+ IN UINT32 PstatesPsdPolicy; ///< PSD policy
+ ///< @BldCfgItem{BLDCFG_ACPI_PSTATES_PSD_POLICY}
+ IN BOOLEAN PStatesInHpcMode; ///< @BldCfgItem{BLDCFG_PSTATE_HPC_MODE}
+ IN UINT32 NumberOfIoApics; ///< Number of I/O APICs in the system
+ ///< @BldCfgItem{BLDCFG_PLATFORM_NUM_IO_APICS}
+ IN PLATFORM_VRM_CONFIGURATION VrmProperties[MaxVrmType]; ///< Several configuration settings for the voltage regulator modules.
+ IN BOOLEAN ProcessorScopeInSb; ///< ACPI Processor Object in \\_SB scope
+ ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_IN_SB}
+ IN CHAR8 ProcessorScopeName0; ///< OEM specific 1st character of processor scope name.
+ ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_NAME0}
+ IN CHAR8 ProcessorScopeName1; ///< OEM specific 2nd character of processor scope name.
+ ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_NAME1}
+ IN UINT8 GnbHdAudio; ///< Control GFX HD Audio controller(Used for HDMI and DP display output),
+ ///< essentially it enables function 1 of graphics device.
+ ///< @li 0 = HD Audio disable
+ ///< @li 1 = HD Audio enable
+ ///< @BldCfgItem{BLDCFG_CFG_GNB_HD_AUDIO}
+ IN UINT8 AbmSupport; ///< Automatic adjust LVDS/eDP Back light level support.It is
+ ///< characteristic specific to display panel which used by platform design.
+ ///< @li 0 = ABM support disabled
+ ///< @li 1 = ABM support enabled
+ ///< @BldCfgItem{BLDCFG_CFG_ABM_SUPPORT}
+ IN UINT8 DynamicRefreshRate; ///< Adjust refresh rate on LVDS/eDP.
+ ///< @BldCfgItem{BLDCFG_CFG_DYNAMIC_REFRESH_RATE}
+ IN UINT16 LcdBackLightControl; ///< The PWM frequency to LCD backlight control.
+ ///< If equal to 0 backlight not controlled by iGPU
+ ///< @BldCfgItem{BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL}
+ IN UINT16 HtcTemperatureLimit; ///< The Hardware Thermal Control temperature limit in tenths of degrees Celsius.
+ ///< If equal to 0, use hardware defaults.
+ ///< @BldCfgItem{BLDCFG_HTC_TEMPERATURE_LIMIT}
+ IN UINT16 LhtcTemperatureLimit; ///< The Local Hardware Thermal Control temperature limit in tenths of degrees Celsius.
+ ///< If equal to 0, use hardware defaults.
+ ///< @BldCfgItem{BLDCFG_LHTC_TEMPERATURE_LIMIT}
+} PLATFORM_CONFIGURATION;
+
+
+/**********************************************************************
+ * Structures for: AmdInitLate
+ **********************************************************************/
+#define PROC_VERSION_LENGTH 48
+#define MAX_DIMMS_PER_SOCKET 16
+#define PROC_MANU_LENGTH 29
+
+/* Interface Parameter Structures */
+/// DMI Type4 - Processor ID
+typedef struct {
+ OUT UINT32 ProcIdLsd; ///< Lower half of 64b ID
+ OUT UINT32 ProcIdMsd; ///< Upper half of 64b ID
+} TYPE4_PROC_ID;
+
+/// DMI Type 4 - Processor information
+typedef struct {
+ OUT UINT8 T4ProcType; ///< CPU Type
+ OUT UINT8 T4ProcFamily; ///< Family 1
+ OUT TYPE4_PROC_ID T4ProcId; ///< Id
+ OUT UINT8 T4Voltage; ///< Voltage
+ OUT UINT16 T4ExternalClock; ///< External clock
+ OUT UINT16 T4MaxSpeed; ///< Max speed
+ OUT UINT16 T4CurrentSpeed; ///< Current speed
+ OUT UINT8 T4Status; ///< Status
+ OUT UINT8 T4ProcUpgrade; ///< Up grade
+ OUT UINT8 T4CoreCount; ///< Core count
+ OUT UINT8 T4CoreEnabled; ///< Core Enable
+ OUT UINT8 T4ThreadCount; ///< Thread count
+ OUT UINT16 T4ProcCharacteristics; ///< Characteristics
+ OUT UINT16 T4ProcFamily2; ///< Family 2
+ OUT CHAR8 T4ProcVersion[PROC_VERSION_LENGTH]; ///< Cpu version
+ OUT CHAR8 T4ProcManufacturer[PROC_MANU_LENGTH]; ///< Manufacturer
+} TYPE4_DMI_INFO;
+
+/// DMI Type 7 - Cache information
+typedef struct _TYPE7_DMI_INFO {
+ OUT UINT16 T7CacheCfg; ///< Cache cfg
+ OUT UINT16 T7MaxCacheSize; ///< Max size
+ OUT UINT16 T7InstallSize; ///< Install size
+ OUT UINT16 T7SupportedSramType; ///< Supported Sram Type
+ OUT UINT16 T7CurrentSramType; ///< Current type
+ OUT UINT8 T7CacheSpeed; ///< Speed
+ OUT UINT8 T7ErrorCorrectionType; ///< ECC type
+ OUT UINT8 T7SystemCacheType; ///< Cache type
+ OUT UINT8 T7Associativity; ///< Associativity
+} TYPE7_DMI_INFO;
+
+/// DMI Type 16 offset 04h - Location
+typedef enum {
+ OtherLocation = 0x01, ///< Assign 01 to Other
+ UnknownLocation, ///< Assign 02 to Unknown
+ SystemboardOrMotherboard, ///< Assign 03 to systemboard or motherboard
+ IsaAddonCard, ///< Assign 04 to ISA add-on card
+ EisaAddonCard, ///< Assign 05 to EISA add-on card
+ PciAddonCard, ///< Assign 06 to PCI add-on card
+ McaAddonCard, ///< Assign 07 to MCA add-on card
+ PcmciaAddonCard, ///< Assign 08 to PCMCIA add-on card
+ ProprietaryAddonCard, ///< Assign 09 to proprietary add-on card
+ NuBus, ///< Assign 0A to NuBus
+ Pc98C20AddonCard, ///< Assign 0A0 to PC-98/C20 add-on card
+ Pc98C24AddonCard, ///< Assign 0A1 to PC-98/C24 add-on card
+ Pc98EAddoncard, ///< Assign 0A2 to PC-98/E add-on card
+ Pc98LocalBusAddonCard ///< Assign 0A3 to PC-98/Local bus add-on card
+} DMI_T16_LOCATION;
+
+/// DMI Type 16 offset 05h - Memory Error Correction
+typedef enum {
+ OtherUse = 0x01, ///< Assign 01 to Other
+ UnknownUse, ///< Assign 02 to Unknown
+ SystemMemory, ///< Assign 03 to system memory
+ VideoMemory, ///< Assign 04 to video memory
+ FlashMemory, ///< Assign 05 to flash memory
+ NonvolatileRam, ///< Assign 06 to non-volatile RAM
+ CacheMemory ///< Assign 07 to cache memory
+} DMI_T16_USE;
+
+/// DMI Type 16 offset 07h - Maximum Capacity
+typedef enum {
+ Dmi16OtherErrCorrection = 0x01, ///< Assign 01 to Other
+ Dmi16UnknownErrCorrection, ///< Assign 02 to Unknown
+ Dmi16NoneErrCorrection, ///< Assign 03 to None
+ Dmi16Parity, ///< Assign 04 to parity
+ Dmi16SingleBitEcc, ///< Assign 05 to Single-bit ECC
+ Dmi16MultiBitEcc, ///< Assign 06 to Multi-bit ECC
+ Dmi16Crc ///< Assign 07 to CRC
+} DMI_T16_ERROR_CORRECTION;
+
+/// DMI Type 16 - Physical Memory Array
+typedef struct {
+ OUT DMI_T16_LOCATION Location; ///< The physical location of the Memory Array,
+ ///< whether on the system board or an add-in board.
+ OUT DMI_T16_USE Use; ///< Identifies the function for which the array
+ ///< is used.
+ OUT DMI_T16_ERROR_CORRECTION MemoryErrorCorrection; ///< The primary hardware error correction or
+ ///< detection method supported by this memory array.
+ OUT UINT32 MaximumCapacity; ///< The maximum memory capacity, in kilobytes,
+ ///< for the array.
+ OUT UINT16 NumberOfMemoryDevices; ///< The number of slots or sockets available
+ ///< for memory devices in this array.
+ OUT UINT64 ExtMaxCapacity; ///< The maximum memory capacity, in bytes,
+ ///< for this array.
+} TYPE16_DMI_INFO;
+
+/// DMI Type 17 offset 0Eh - Form Factor
+typedef enum {
+ OtherFormFactor = 0x01, ///< Assign 01 to Other
+ UnknowFormFactor, ///< Assign 02 to Unknown
+ SimmFormFactor, ///< Assign 03 to SIMM
+ SipFormFactor, ///< Assign 04 to SIP
+ ChipFormFactor, ///< Assign 05 to Chip
+ DipFormFactor, ///< Assign 06 to DIP
+ ZipFormFactor, ///< Assign 07 to ZIP
+ ProprietaryCardFormFactor, ///< Assign 08 to Proprietary Card
+ DimmFormFactorFormFactor, ///< Assign 09 to DIMM
+ TsopFormFactor, ///< Assign 10 to TSOP
+ RowOfChipsFormFactor, ///< Assign 11 to Row of chips
+ RimmFormFactor, ///< Assign 12 to RIMM
+ SodimmFormFactor, ///< Assign 13 to SODIMM
+ SrimmFormFactor, ///< Assign 14 to SRIMM
+ FbDimmFormFactor ///< Assign 15 to FB-DIMM
+} DMI_T17_FORM_FACTOR;
+
+/// DMI Type 17 offset 12h - Memory Type
+typedef enum {
+ OtherMemType = 0x01, ///< Assign 01 to Other
+ UnknownMemType, ///< Assign 02 to Unknown
+ DramMemType, ///< Assign 03 to DRAM
+ EdramMemType, ///< Assign 04 to EDRAM
+ VramMemType, ///< Assign 05 to VRAM
+ SramMemType, ///< Assign 06 to SRAM
+ RamMemType, ///< Assign 07 to RAM
+ RomMemType, ///< Assign 08 to ROM
+ FlashMemType, ///< Assign 09 to Flash
+ EepromMemType, ///< Assign 10 to EEPROM
+ FepromMemType, ///< Assign 11 to FEPROM
+ EpromMemType, ///< Assign 12 to EPROM
+ CdramMemType, ///< Assign 13 to CDRAM
+ ThreeDramMemType, ///< Assign 14 to 3DRAM
+ SdramMemType, ///< Assign 15 to SDRAM
+ SgramMemType, ///< Assign 16 to SGRAM
+ RdramMemType, ///< Assign 17 to RDRAM
+ DdrMemType, ///< Assign 18 to DDR
+ Ddr2MemType, ///< Assign 19 to DDR2
+ Ddr2FbdimmMemType, ///< Assign 20 to DDR2 FB-DIMM
+ Ddr3MemType = 0x18, ///< Assign 24 to DDR3
+ Fbd2MemType ///< Assign 25 to FBD2
+} DMI_T17_MEMORY_TYPE;
+
+/// DMI Type 17 offset 13h - Type Detail
+typedef struct {
+ OUT UINT16 Reserved1:1; ///< Reserved
+ OUT UINT16 Other:1; ///< Other
+ OUT UINT16 Unknown:1; ///< Unknown
+ OUT UINT16 FastPaged:1; ///< Fast-Paged
+ OUT UINT16 StaticColumn:1; ///< Static column
+ OUT UINT16 PseudoStatic:1; ///< Pseudo-static
+ OUT UINT16 Rambus:1; ///< RAMBUS
+ OUT UINT16 Synchronous:1; ///< Synchronous
+ OUT UINT16 Cmos:1; ///< CMOS
+ OUT UINT16 Edo:1; ///< EDO
+ OUT UINT16 WindowDram:1; ///< Window DRAM
+ OUT UINT16 CacheDram:1; ///< Cache Dram
+ OUT UINT16 NonVolatile:1; ///< Non-volatile
+ OUT UINT16 Registered:1; ///< Registered (Buffered)
+ OUT UINT16 Unbuffered:1; ///< Unbuffered (Unregistered)
+ OUT UINT16 Reserved2:1; ///< Reserved
+} DMI_T17_TYPE_DETAIL;
+
+/// DMI Type 17 - Memory Device
+typedef struct {
+ OUT UINT16 Handle; ///< The temporary handle, or instance number, associated with the structure
+ OUT UINT16 TotalWidth; ///< Total Width, in bits, of this memory device, including any check or error-correction bits.
+ OUT UINT16 DataWidth; ///< Data Width, in bits, of this memory device.
+ OUT UINT16 MemorySize; ///< The size of the memory device.
+ OUT DMI_T17_FORM_FACTOR FormFactor; ///< The implementation form factor for this memory device.
+ OUT UINT8 DeviceSet; ///< Identifies when the Memory Device is one of a set of
+ ///< Memory Devices that must be populated with all devices of
+ ///< the same type and size, and the set to which this device belongs.
+ OUT CHAR8 DeviceLocator[8]; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located.
+ OUT CHAR8 BankLocator[10]; ///< The string number of the string that identifies the physically labeled bank where the memory device is located.
+ OUT DMI_T17_MEMORY_TYPE MemoryType; ///< The type of memory used in this device.
+ OUT DMI_T17_TYPE_DETAIL TypeDetail; ///< Additional detail on the memory device type
+ OUT UINT16 Speed; ///< Identifies the speed of the device, in megahertz (MHz).
+ OUT UINT64 ManufacturerIdCode; ///< Manufacturer ID code.
+ OUT CHAR8 SerialNumber[9]; ///< Serial Number.
+ OUT CHAR8 PartNumber[19]; ///< Part Number.
+ OUT UINT8 Attributes; ///< Bits 7-4: Reserved, Bits 3-0: rank.
+ OUT UINT32 ExtSize; ///< Extended Size.
+ OUT UINT16 ConfigSpeed; ///< Configured memory clock speed
+} TYPE17_DMI_INFO;
+
+/// Memory DMI Type 17 - for memory use
+typedef struct {
+ OUT UINT8 Socket:3; ///< Socket ID
+ OUT UINT8 Channel:2; ///< Channel ID
+ OUT UINT8 Dimm:2; ///< DIMM ID
+ OUT UINT8 DimmPresent:1; ///< Dimm Present
+ OUT UINT16 Handle; ///< The temporary handle, or instance number, associated with the structure
+ OUT UINT16 TotalWidth; ///< Total Width, in bits, of this memory device, including any check or error-correction bits.
+ OUT UINT16 DataWidth; ///< Data Width, in bits, of this memory device.
+ OUT UINT16 MemorySize; ///< The size of the memory device.
+ OUT DMI_T17_FORM_FACTOR FormFactor; ///< The implementation form factor for this memory device.
+ OUT UINT8 DeviceLocator; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located.
+ OUT UINT8 BankLocator; ///< The string number of the string that identifies the physically labeled bank where the memory device is located.
+ OUT UINT16 Speed; ///< Identifies the speed of the device, in megahertz (MHz).
+ OUT UINT64 ManufacturerIdCode; ///< Manufacturer ID code.
+ OUT UINT8 SerialNumber[4]; ///< Serial Number.
+ OUT UINT8 PartNumber[18]; ///< Part Number.
+ OUT UINT8 Attributes; ///< Bits 7-4: Reserved, Bits 3-0: rank.
+ OUT UINT32 ExtSize; ///< Extended Size.
+ OUT UINT16 ConfigSpeed; ///< Configured memory clock speed
+} MEM_DMI_PHYSICAL_DIMM_INFO;
+
+/// Memory DMI Type 20 - for memory use
+typedef struct {
+ OUT UINT8 Socket:3; ///< Socket ID
+ OUT UINT8 Channel:2; ///< Channel ID
+ OUT UINT8 Dimm:2; ///< DIMM ID
+ OUT UINT8 DimmPresent:1; ///< Dimm Present
+ OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, of a range
+ ///< of memory mapped to the referenced Memory Device.
+ OUT UINT32 EndingAddr; ///< The handle, or instance number, associated with
+ ///< the Memory Device structure to which this address
+ ///< range is mapped.
+ OUT UINT16 MemoryDeviceHandle; ///< The handle, or instance number, associated with
+ ///< the Memory Device structure to which this address
+ ///< range is mapped.
+ OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of
+ ///< memory mapped to the referenced Memory Device.
+ OUT UINT64 ExtEndingAddr; ///< The physical ending address, in bytes, of the last of
+ ///< a range of addresses mapped to the referenced Memory Device.
+} MEM_DMI_LOGICAL_DIMM_INFO;
+
+/// DMI Type 19 - Memory Array Mapped Address
+typedef struct {
+ OUT UINT32 StartingAddr; ///< The physical address, in kilobytes,
+ ///< of a range of memory mapped to the
+ ///< specified physical memory array.
+ OUT UINT32 EndingAddr; ///< The physical ending address of the
+ ///< last kilobyte of a range of addresses
+ ///< mapped to the specified physical memory array.
+ OUT UINT16 MemoryArrayHandle; ///< The handle, or instance number, associated
+ ///< with the physical memory array to which this
+ ///< address range is mapped.
+ OUT UINT8 PartitionWidth; ///< Identifies the number of memory devices that
+ ///< form a single row of memory for the address
+ ///< partition defined by this structure.
+ OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of
+ ///< memory mapped to the specified Physical Memory Array.
+ OUT UINT64 ExtEndingAddr; ///< The physical address, in bytes, of a range of
+ ///< memory mapped to the specified Physical Memory Array.
+} TYPE19_DMI_INFO;
+
+///DMI Type 20 - Memory Device Mapped Address
+typedef struct {
+ OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, of a range
+ ///< of memory mapped to the referenced Memory Device.
+ OUT UINT32 EndingAddr; ///< The handle, or instance number, associated with
+ ///< the Memory Device structure to which this address
+ ///< range is mapped.
+ OUT UINT16 MemoryDeviceHandle; ///< The handle, or instance number, associated with
+ ///< the Memory Device structure to which this address
+ ///< range is mapped.
+ OUT UINT16 MemoryArrayMappedAddressHandle; ///< The handle, or instance number, associated
+ ///< with the Memory Array Mapped Address structure to
+ ///< which this device address range is mapped.
+ OUT UINT8 PartitionRowPosition; ///< Identifies the position of the referenced Memory
+ ///< Device in a row of the address partition.
+ OUT UINT8 InterleavePosition; ///< The position of the referenced Memory Device in
+ ///< an interleave.
+ OUT UINT8 InterleavedDataDepth; ///< The maximum number of consecutive rows from the
+ ///< referenced Memory Device that are accessed in a
+ ///< single interleaved transfer.
+ OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of
+ ///< memory mapped to the referenced Memory Device.
+ OUT UINT64 ExtEndingAddr; ///< The physical ending address, in bytes, of the last of
+ ///< a range of addresses mapped to the referenced Memory Device.
+} TYPE20_DMI_INFO;
+
+/// Collection of pointers to the DMI records
+typedef struct {
+ OUT TYPE4_DMI_INFO T4[MAX_SOCKETS_SUPPORTED]; ///< Type 4 struc
+ OUT TYPE7_DMI_INFO T7L1[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 1
+ OUT TYPE7_DMI_INFO T7L2[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 2
+ OUT TYPE7_DMI_INFO T7L3[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 3
+ OUT TYPE16_DMI_INFO T16; ///< Type 16 struc
+ OUT TYPE17_DMI_INFO T17[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL]; ///< Type 17 struc
+ OUT TYPE19_DMI_INFO T19; ///< Type 19 struc
+ OUT TYPE20_DMI_INFO T20[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL]; ///< Type 20 struc
+} DMI_INFO;
+
+/**********************************************************************
+ * Interface call: AllocateExecutionCache
+ **********************************************************************/
+#define MAX_CACHE_REGIONS 3
+
+/// AllocateExecutionCache sub param structure for cached memory region
+typedef struct {
+ IN OUT UINT32 ExeCacheStartAddr; ///< Start address
+ IN OUT UINT32 ExeCacheSize; ///< Size
+} EXECUTION_CACHE_REGION;
+
+/**********************************************************************
+ * Interface call: AmdGetAvailableExeCacheSize
+ **********************************************************************/
+/// Get available Cache remain
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ OUT UINT32 AvailableExeCacheSize; ///< Remain size
+} AMD_GET_EXE_SIZE_PARAMS;
+
+AGESA_STATUS
+AmdGetAvailableExeCacheSize (
+ IN OUT AMD_GET_EXE_SIZE_PARAMS *AmdGetExeSizeParams
+ );
+
+/// Selection type for core leveling
+typedef enum {
+ CORE_LEVEL_LOWEST, ///< Level to lowest common denominator
+ CORE_LEVEL_TWO, ///< Level to 2 cores
+ CORE_LEVEL_POWER_OF_TWO, ///< Level to 1,2,4 or 8
+ CORE_LEVEL_NONE, ///< Do no leveling
+ CORE_LEVEL_COMPUTE_UNIT, ///< Level cores to one core per compute unit
+ CORE_LEVEL_COMPUTE_UNIT_TWO, ///< Level cores to two cores per compute unit
+ CORE_LEVEL_COMPUTE_UNIT_THREE, ///< Level cores to three cores per compute unit
+ CORE_LEVEL_ONE, ///< Level to 1 core
+ CORE_LEVEL_THREE, ///< Level to 3 cores
+ CORE_LEVEL_FOUR, ///< Level to 4 cores
+ CORE_LEVEL_FIVE, ///< Level to 5 cores
+ CORE_LEVEL_SIX, ///< Level to 6 cores
+ CORE_LEVEL_SEVEN, ///< Level to 7 cores
+ CORE_LEVEL_EIGHT, ///< Level to 8 cores
+ CORE_LEVEL_NINE, ///< Level to 9 cores
+ CORE_LEVEL_TEN, ///< Level to 10 cores
+ CORE_LEVEL_ELEVEN, ///< Level to 11 cores
+ CORE_LEVEL_TWELVE, ///< Level to 12 cores
+ CORE_LEVEL_THIRTEEN, ///< Level to 13 cores
+ CORE_LEVEL_FOURTEEN, ///< Level to 14 cores
+ CORE_LEVEL_FIFTEEN, ///< Level to 15 cores
+ CoreLevelModeMax ///< Used for bounds checking
+} CORE_LEVELING_TYPE;
+
+
+
+
+
+/************************************************************************
+ *
+ * AGESA Basic Level interface structure definition and function prototypes
+ *
+ ***********************************************************************/
+
+/**********************************************************************
+ * Interface call: AmdCreateStruct
+ **********************************************************************/
+AGESA_STATUS
+AmdCreateStruct (
+ IN OUT AMD_INTERFACE_PARAMS *InterfaceParams
+ );
+
+/**********************************************************************
+ * Interface call: AmdReleaseStruct
+ **********************************************************************/
+AGESA_STATUS
+AmdReleaseStruct (
+ IN OUT AMD_INTERFACE_PARAMS *InterfaceParams
+ );
+
+/**********************************************************************
+ * Interface call: AmdInitReset
+ **********************************************************************/
+/// AmdInitReset param structure
+typedef struct {
+ IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< The cached memory region
+ IN AMD_HT_RESET_INTERFACE HtConfig; ///< The interface for Ht Recovery
+ IN FCH_RESET_INTERFACE FchInterface; ///< Interface for FCH configuration
+} AMD_RESET_PARAMS;
+
+AGESA_STATUS
+AmdInitReset (
+ IN OUT AMD_RESET_PARAMS *ResetParams
+ );
+
+
+/**********************************************************************
+ * Interface call: AmdInitEarly
+ **********************************************************************/
+/// InitEarly param structure
+///
+/// Provide defaults or customizations to each service performed in AmdInitEarly.
+///
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< Execution Map Interface
+ IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics.
+ IN AMD_HT_INTERFACE HtConfig; ///< HyperTransport Interface
+ IN GNB_CONFIGURATION GnbConfig; ///< GNB configuration
+} AMD_EARLY_PARAMS;
+
+AGESA_STATUS
+AmdInitEarly (
+ IN OUT AMD_EARLY_PARAMS *EarlyParams
+ );
+
+
+/**********************************************************************
+ * Interface call: AmdInitPost
+ **********************************************************************/
+/// AmdInitPost param structure
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics.
+ IN MEM_PARAMETER_STRUCT MemConfig; ///< Memory post param
+ IN GNB_POST_CONFIGURATION GnbPostConfig; ///< GNB post param
+} AMD_POST_PARAMS;
+
+AGESA_STATUS
+AmdInitPost (
+ IN OUT AMD_POST_PARAMS *PostParams ///< Amd Cpu init param
+ );
+
+
+/**********************************************************************
+ * Interface call: AmdInitEnv
+ **********************************************************************/
+/// AmdInitEnv param structure
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics.
+ IN GNB_ENV_CONFIGURATION GnbEnvConfiguration; ///< GNB configuration
+ IN FCH_INTERFACE FchInterface; ///< FCH configuration
+} AMD_ENV_PARAMS;
+
+AGESA_STATUS
+AmdInitEnv (
+ IN OUT AMD_ENV_PARAMS *EnvParams
+ );
+
+
+/**********************************************************************
+ * Interface call: AmdInitMid
+ **********************************************************************/
+/// AmdInitMid param structure
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics.
+ IN GNB_MID_CONFIGURATION GnbMidConfiguration; ///< GNB configuration
+ IN FCH_INTERFACE FchInterface; ///< FCH configuration
+} AMD_MID_PARAMS;
+
+AGESA_STATUS
+AmdInitMid (
+ IN OUT AMD_MID_PARAMS *MidParams
+ );
+
+
+/**********************************************************************
+ * Interface call: AmdInitLate
+ **********************************************************************/
+/// AmdInitLate param structure
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics.
+ IN IOMMU_EXCLUSION_RANGE_DESCRIPTOR *IvrsExclusionRangeList; ///< Pointer to array of exclusion ranges
+ OUT DMI_INFO *DmiTable; ///< DMI Interface
+ OUT VOID *AcpiPState; ///< Acpi Pstate SSDT Table
+ OUT VOID *AcpiSrat; ///< SRAT Table
+ OUT VOID *AcpiSlit; ///< SLIT Table
+ OUT VOID *AcpiWheaMce; ///< WHEA MCE Table
+ OUT VOID *AcpiWheaCmc; ///< WHEA CMC Table
+ OUT VOID *AcpiAlib; ///< ACPI SSDT table with ALIB implementation
+ OUT VOID *AcpiIvrs; ///< IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table
+ OUT VOID *AcpiCrat; ///< Component Resource Affinity Table table
+ OUT VOID *AcpiCdit; ///< Component Locality Distance Information table
+ IN GNB_LATE_CONFIGURATION GnbLateConfiguration; ///< GNB configuration
+} AMD_LATE_PARAMS;
+
+AGESA_STATUS
+AmdInitLate (
+ IN OUT AMD_LATE_PARAMS *LateParams
+ );
+
+/**********************************************************************
+ * Interface call: AmdInitRecovery
+ **********************************************************************/
+/// CPU Recovery Parameters
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics.
+} AMD_CPU_RECOVERY_PARAMS;
+
+/// AmdInitRecovery param structure
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN MEM_PARAMETER_STRUCT MemConfig; ///< Memory post param
+ IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< The cached memory region. And the max cache region is 3
+ IN AMD_CPU_RECOVERY_PARAMS CpuRecoveryParams; ///< Params for CPU related recovery init.
+} AMD_RECOVERY_PARAMS;
+
+AGESA_STATUS
+AmdInitRecovery (
+ IN OUT AMD_RECOVERY_PARAMS *RecoveryParams
+ );
+
+/**********************************************************************
+ * Interface call: AmdInitResume
+ **********************************************************************/
+/// AmdInitResume param structure
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN PLATFORM_CONFIGURATION PlatformConfig; ///< Platform operational characteristics
+ IN AMD_S3_PARAMS S3DataBlock; ///< Save state data
+} AMD_RESUME_PARAMS;
+
+AGESA_STATUS
+AmdInitResume (
+ IN AMD_RESUME_PARAMS *ResumeParams
+ );
+
+
+/**********************************************************************
+ * Interface call: AmdS3LateRestore
+ **********************************************************************/
+/// AmdS3LateRestore param structure
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics.
+ IN AMD_S3_PARAMS S3DataBlock; ///< Save state data
+} AMD_S3LATE_PARAMS;
+
+AGESA_STATUS
+AmdS3LateRestore (
+ IN OUT AMD_S3LATE_PARAMS *S3LateParams
+ );
+
+
+/**********************************************************************
+ * Interface call: AmdS3Save
+ **********************************************************************/
+/// AmdS3Save param structure
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics.
+ OUT AMD_S3_PARAMS S3DataBlock; ///< Standard header
+ IN FCH_INTERFACE FchInterface; ///< FCH configuration
+} AMD_S3SAVE_PARAMS;
+
+AGESA_STATUS
+AmdS3Save (
+ IN OUT AMD_S3SAVE_PARAMS *AmdS3SaveParams
+ );
+
+
+/**********************************************************************
+ * Interface call: AmdLateRunApTask
+ **********************************************************************/
+/**
+ * Entry point for AP tasking.
+ */
+AGESA_STATUS
+AmdLateRunApTask (
+ IN AP_EXE_PARAMS *AmdApExeParams
+);
+
+//
+// General Services API
+//
+
+/**********************************************************************
+ * Interface service call: AmdGetApicId
+ **********************************************************************/
+/// Request the APIC ID of a particular core.
+
+typedef struct {
+ IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN UINT8 Socket; ///< The Core's Socket.
+ IN UINT8 Core; ///< The Core id.
+ OUT BOOLEAN IsPresent; ///< The Core is present, and ApicAddress is valid.
+ OUT UINT8 ApicAddress; ///< The Core's APIC ID.
+} AMD_APIC_PARAMS;
+
+/**
+ * Get a specified Core's APIC ID.
+ */
+AGESA_STATUS
+AmdGetApicId (
+ IN OUT AMD_APIC_PARAMS *AmdParamApic
+);
+
+/**********************************************************************
+ * Interface service call: AmdGetPciAddress
+ **********************************************************************/
+/// Request the PCI Address of a Processor Module (that is, its Northbridge)
+
+typedef struct {
+ IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN UINT8 Socket; ///< The Processor's socket
+ IN UINT8 Module; ///< The Module in that Processor
+ OUT BOOLEAN IsPresent; ///< The Core is present, and PciAddress is valid.
+ OUT PCI_ADDR PciAddress; ///< The Processor's PCI Config Space address (Function 0, Register 0)
+} AMD_GET_PCI_PARAMS;
+
+/**
+ * Get Processor Module's PCI Config Space address.
+ */
+AGESA_STATUS
+AmdGetPciAddress (
+ IN OUT AMD_GET_PCI_PARAMS *AmdParamGetPci
+);
+
+/**********************************************************************
+ * Interface service call: AmdIdentifyCore
+ **********************************************************************/
+/// Request the identity (Socket, Module, Core) of the current Processor Core
+
+typedef struct {
+ IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ OUT UINT8 Socket; ///< The current Core's Socket
+ OUT UINT8 Module; ///< The current Core's Processor Module
+ OUT UINT8 Core; ///< The current Core's core id.
+} AMD_IDENTIFY_PARAMS;
+
+/**
+ * "Who am I" for the current running core.
+ */
+AGESA_STATUS
+AmdIdentifyCore (
+ IN OUT AMD_IDENTIFY_PARAMS *AmdParamIdentify
+);
+
+/**********************************************************************
+ * Interface service call: AmdReadEventLog
+ **********************************************************************/
+/// An Event Log Entry.
+typedef struct {
+ IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ OUT UINT32 EventClass; ///< The severity of this event, matches AGESA_STATUS.
+ OUT UINT32 EventInfo; ///< The unique event identifier, zero means "no event".
+ OUT UINT32 DataParam1; ///< Data specific to the Event.
+ OUT UINT32 DataParam2; ///< Data specific to the Event.
+ OUT UINT32 DataParam3; ///< Data specific to the Event.
+ OUT UINT32 DataParam4; ///< Data specific to the Event.
+} EVENT_PARAMS;
+
+/**
+ * Read an Event from the Event Log.
+ */
+AGESA_STATUS
+AmdReadEventLog (
+ IN EVENT_PARAMS *Event
+);
+
+/**********************************************************************
+ * Interface service call: AmdIdentifyDimm
+ **********************************************************************/
+/// Request the identity of dimm from system address
+
+typedef struct {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN UINT64 MemoryAddress; ///< System Address that needs to be translated to dimm identification.
+ OUT UINT8 SocketId; ///< The socket on which the targeted address locates.
+ OUT UINT8 MemChannelId; ///< The channel on which the targeted address locates.
+ OUT UINT8 DimmId; ///< The dimm on which the targeted address locates.
+} AMD_IDENTIFY_DIMM;
+
+/**
+ * Get the dimm identification for the address.
+ */
+AGESA_STATUS
+AmdIdentifyDimm (
+ IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify
+);
+
+AGESA_STATUS
+AmdIdsRunApTaskLate (
+ IN AP_EXE_PARAMS *AmdApExeParams
+ );
+
+/// Request the 2D Data Eye Training Data
+#define RD_DATAEYE 0
+#define WR_DATAEYE 1
+
+/**********************************************************************
+ * Interface service call: AmdGet2DDataEye
+ **********************************************************************/
+/// Request the training data eye on Socket, Channel, Dimm.
+
+typedef struct _AMD_GET_DATAEYE {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN OUT AMD_POST_PARAMS *PostParamsPtr; ///< Pointer to AMD_POST_PARAMS
+ IN UINT8 SocketId; ///< The socket number to get the 2D data eye
+ IN UINT8 MemChannelId; ///< The channel number to get the 2D data eye
+ IN UINT8 DimmId; ///< The dimm number to get the 2D data eye
+ IN UINT8 DataEyeType; ///< Get the 2D data eye on read or write training
+ OUT UINT8* DataEyeBuffer; ///< The buffer to stores the 2D data eye
+} AMD_GET_DATAEYE;
+
+AGESA_STATUS
+AmdGet2DDataEye (
+ IN OUT AMD_GET_DATAEYE *AmdGetDataEye
+ );
+
+#define AGESA_IDS_DFT_VAL 0xFFFF ///< Default value of every uninitlized NV item, the action for it will be ignored
+#define AGESA_IDS_NV_END 0xFFFF ///< Flag specify end of option structure
+/// WARNING: Don't change the comment below, it used as signature for script
+/// AGESA IDS NV ID Definitions
+typedef enum {
+ AGESA_IDS_EXT_ID_START = 0x0000,///< 0x0000 specify the start of external NV id
+
+ AGESA_IDS_NV_UCODE, ///< 0x0001 Enable or disable microcode patching
+
+ AGESA_IDS_NV_TARGET_PSTATE, ///< 0x0002 Set the P-state required to be activated
+ AGESA_IDS_NV_POSTPSTATE, ///< 0x0003 Set the P-state required to be activated through POST
+
+ AGESA_IDS_NV_BANK_INTERLEAVE, ///< 0x0004 Enable or disable Bank Interleave
+ AGESA_IDS_NV_CHANNEL_INTERLEAVE, ///< 0x0005 Enable or disable Channel Interleave
+ AGESA_IDS_NV_NODE_INTERLEAVE, ///< 0x0006 Enable or disable Node Interleave
+ AGESA_IDS_NV_MEMHOLE, ///< 0x0007 Enables or disable memory hole
+
+ AGESA_IDS_NV_SCRUB_REDIRECTION, ///< 0x0008 Enable or disable a write to dram with corrected data
+ AGESA_IDS_NV_DRAM_SCRUB, ///< 0x0009 Set the rate of background scrubbing for DRAM
+ AGESA_IDS_NV_DCACHE_SCRUB, ///< 0x000A Set the rate of background scrubbing for the DCache.
+ AGESA_IDS_NV_L2_SCRUB, ///< 0x000B Set the rate of background scrubbing for the L2 cache
+ AGESA_IDS_NV_L3_SCRUB, ///< 0x000C Set the rate of background scrubbing for the L3 cache
+ AGESA_IDS_NV_ICACHE_SCRUB, ///< 0x000D Set the rate of background scrubbing for the Icache
+ AGESA_IDS_NV_SYNC_ON_ECC_ERROR, ///< 0x000E Enable or disable the sync flood on un-correctable ECC error
+ AGESA_IDS_NV_ECC_SYMBOL_SIZE, ///< 0x000F Set ECC symbol size
+
+ AGESA_IDS_NV_ALL_MEMCLKS, ///< 0x0010 Enable or disable all memory clocks enable
+ AGESA_IDS_NV_DCT_GANGING_MODE, ///< 0x0011 Set the Ganged mode
+ AGESA_IDS_NV_DRAM_BURST_LENGTH32, ///< 0x0012 Set the DRAM Burst Length 32
+ AGESA_IDS_NV_MEMORY_POWER_DOWN, ///< 0x0013 Enable or disable Memory power down mode
+ AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE, ///< 0x0014 Set the Memory power down mode
+ AGESA_IDS_NV_DLL_SHUT_DOWN, ///< 0x0015 Enable or disable DLLShutdown
+ AGESA_IDS_NV_ONLINE_SPARE, ///< 0x0016 Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap
+
+ AGESA_IDS_NV_HT_ASSIST, ///< 0x0017 Enable or Disable HT Assist
+ AGESA_IDS_NV_ATMMODE, ///< 0x0018 Enable or Disable ATM mode
+
+ AGESA_IDS_NV_HDTOUT, ///< 0x0019 Enable or disable HDTOUT feature
+
+ AGESA_IDS_NV_HTLINKSOCKET, ///< 0x001A HT Link Socket
+ AGESA_IDS_NV_HTLINKPORT, ///< 0x001B HT Link Port
+ AGESA_IDS_NV_HTLINKFREQ, ///< 0x001C HT Link Frequency
+ AGESA_IDS_NV_HTLINKWIDTHIN, ///< 0x001D HT Link In Width
+ AGESA_IDS_NV_HTLINKWIDTHOUT, ///< 0x001E HT Link Out Width
+
+ AGESA_IDS_NV_GNBHDAUDIOEN, ///< 0x001F Enable or disable GNB HD Audio
+
+ AGESA_IDS_NV_CPB_EN, ///< 0x0020 Core Performance Boost
+
+ AGESA_IDS_NV_HTC_EN, ///< 0x0021 HTC Enable
+ AGESA_IDS_NV_HTC_OVERRIDE, ///< 0x0022 HTC Override
+ AGESA_IDS_NV_HTC_PSTATE_LIMIT, ///< 0x0023 HTC P-state limit select
+ AGESA_IDS_NV_HTC_TEMP_HYS, ///< 0x0024 HTC Temperature Hysteresis
+ AGESA_IDS_NV_HTC_ACT_TEMP, ///< 0x0025 HTC Activation Temp
+
+ AGESA_IDS_NV_POWER_POLICY, ///< 0x0026 Select Platform Power Policy
+ AGESA_IDS_NV_DRAMCON, ///< 0x0027 Specify the mode for controller initialization
+ AGESA_IDS_EXT_ID_END, ///< 0x0028 specify the end of external NV ID
+} IDS_EX_NV_ID;
+
+
+#define IDS_NUM_EXT_NV_ITEM (AGESA_IDS_EXT_ID_END - AGESA_IDS_EXT_ID_START + 1)
+
+
+#endif // _AGESA_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/AMD.h b/src/vendorcode/amd/agesa/f16kb/AMD.h
new file mode 100644
index 0000000..bfce993
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/AMD.h
@@ -0,0 +1,476 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Agesa structures and definitions
+ *
+ * Contains AMD AGESA core interface
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Include
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+
+#ifndef _AMD_H_
+#define _AMD_H_
+
+#define AGESA_REVISION "Arch2008"
+#define AGESA_ID "AGESA"
+
+#define Int16FromChar(a,b) ((a) << 0 | (b) << 8)
+#define Int32FromChar(a,b,c,d) ((a) << 0 | (b) << 8 | (c) << 16 | (d) << 24)
+// AGESA Types and Definitions
+//
+//
+#define LAST_ENTRY 0xFFFFFFFFul
+#define IMAGE_SIGNATURE Int32FromChar ('$', 'A', 'M', 'D')
+#define IOCF8 0xCF8
+#define IOCFC 0xCFC
+
+/// The return status for all AGESA public services.
+///
+/// Services return the most severe status of any logged event. Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK
+/// will have log entries with more detail.
+///
+typedef enum {
+ AGESA_SUCCESS = 0, ///< The service completed normally. Info may be logged.
+ AGESA_UNSUPPORTED, ///< The dispatcher or create struct had an unimplemented function requested.
+ ///< Not logged.
+ AGESA_BOUNDS_CHK, ///< A dynamic parameter was out of range and the service was not provided.
+ ///< Example, memory address not installed, heap buffer handle not found.
+ ///< Not Logged.
+ // AGESA_STATUS of greater severity (the ones below this line), always have a log entry available.
+ AGESA_ALERT, ///< An observed condition, but no loss of function.
+ ///< See log. Example, HT CRC.
+ AGESA_WARNING, ///< Possible or minor loss of function. See Log.
+ AGESA_ERROR, ///< Significant loss of function, boot may be possible. See Log.
+ AGESA_CRITICAL, ///< Continue boot only to notify user. See Log.
+ AGESA_FATAL, ///< Halt booting. See Log, however Fatal errors pertaining to heap problems
+ ///< may not be able to reliably produce log events.
+ AgesaStatusMax ///< Not a status, for limit checking.
+} AGESA_STATUS;
+
+/// For checking whether a status is at or above the mandatory log level.
+#define AGESA_STATUS_LOG_LEVEL AGESA_ALERT
+
+/**
+ * Callout method to the host environment.
+ *
+ * Callout using a dispatch with appropriate thunk layer, which is determined by the host environment.
+ *
+ * @param[in] Function The specific callout function being invoked.
+ * @param[in] FcnData Function specific data item.
+ * @param[in,out] ConfigPtr Reference to Callout params.
+ */
+typedef AGESA_STATUS (*CALLOUT_ENTRY) (
+ IN UINT32 Function,
+ IN UINTN FcnData,
+ IN OUT VOID *ConfigPtr
+ );
+
+typedef AGESA_STATUS (*IMAGE_ENTRY) (VOID *ConfigPtr);
+typedef AGESA_STATUS (*MODULE_ENTRY) (VOID *ConfigPtr);
+
+///This allocation type is used by the AmdCreateStruct entry point
+typedef enum {
+ PreMemHeap = 0, ///< Create heap in cache.
+ PostMemDram, ///< Create heap in memory.
+ ByHost ///< Create heap by Host.
+} ALLOCATION_METHOD;
+
+/// These width descriptors are used by the library function, and others, to specify the data size
+typedef enum ACCESS_WIDTH {
+ AccessWidth8 = 1, ///< Access width is 8 bits.
+ AccessWidth16, ///< Access width is 16 bits.
+ AccessWidth32, ///< Access width is 32 bits.
+ AccessWidth64, ///< Access width is 64 bits.
+
+ AccessS3SaveWidth8 = 0x81, ///< Save 8 bits data.
+ AccessS3SaveWidth16, ///< Save 16 bits data.
+ AccessS3SaveWidth32, ///< Save 32 bits data.
+ AccessS3SaveWidth64, ///< Save 64 bits data.
+} ACCESS_WIDTH;
+
+/// AGESA struct name
+typedef enum {
+ // AGESA BASIC FUNCTIONS
+ AMD_INIT_RECOVERY = 0x00020000, ///< AmdInitRecovery entry point handle
+ AMD_CREATE_STRUCT, ///< AmdCreateStruct handle
+ AMD_INIT_EARLY, ///< AmdInitEarly entry point handle
+ AMD_INIT_ENV, ///< AmdInitEnv entry point handle
+ AMD_INIT_LATE, ///< AmdInitLate entry point handle
+ AMD_INIT_MID, ///< AmdInitMid entry point handle
+ AMD_INIT_POST, ///< AmdInitPost entry point handle
+ AMD_INIT_RESET, ///< AmdInitReset entry point handle
+ AMD_INIT_RESUME, ///< AmdInitResume entry point handle
+ AMD_RELEASE_STRUCT, ///< AmdReleaseStruct handle
+ AMD_S3LATE_RESTORE, ///< AmdS3LateRestore entry point handle
+ AMD_S3_SAVE, ///< AmdS3Save entry point handle
+ AMD_GET_APIC_ID, ///< AmdGetApicId entry point handle
+ AMD_GET_PCI_ADDRESS, ///< AmdGetPciAddress entry point handle
+ AMD_IDENTIFY_CORE, ///< AmdIdentifyCore general service handle
+ AMD_READ_EVENT_LOG, ///< AmdReadEventLog general service handle
+ AMD_GET_EXECACHE_SIZE, ///< AmdGetAvailableExeCacheSize general service handle
+ AMD_LATE_RUN_AP_TASK, ///< AmdLateRunApTask entry point handle
+ AMD_IDENTIFY_DIMMS, ///< AmdIdentifyDimm general service handle
+ AMD_GET_2D_DATA_EYE ///< AmdGet2DDataEye general service handle
+} AGESA_STRUCT_NAME;
+
+ /* ResetType constant values */
+#define WARM_RESET_WHENEVER 1
+#define COLD_RESET_WHENEVER 2
+#define WARM_RESET_IMMEDIATELY 3
+#define COLD_RESET_IMMEDIATELY 4
+
+
+// AGESA Structures
+
+/// The standard header for all AGESA services.
+/// For internal AGESA naming conventions, see @ref amdconfigparamname .
+typedef struct {
+ IN UINT32 ImageBasePtr; ///< The AGESA Image base address.
+ IN UINT32 Func; ///< The service desired
+ IN UINT32 AltImageBasePtr; ///< Alternate Image location
+ IN CALLOUT_ENTRY CalloutPtr; ///< For Callout from AGESA
+ IN UINT8 HeapStatus; ///< For heap status from boot time slide.
+ IN UINT64 HeapBasePtr; ///< Location of the heap
+ IN OUT UINT8 Reserved[7]; ///< This space is reserved for future use.
+} AMD_CONFIG_PARAMS;
+
+
+/// Create Struct Interface.
+typedef struct {
+ IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header
+ IN AGESA_STRUCT_NAME AgesaFunctionName; ///< The service to init
+ IN ALLOCATION_METHOD AllocationMethod; ///< How to handle buffer allocation
+ IN OUT UINT32 NewStructSize; ///< The size of the allocated data, in for ByHost, else out only.
+ IN OUT VOID *NewStructPtr; ///< The struct for the service.
+ ///< The struct to init for ByHost allocation,
+ ///< the initialized struct on return.
+} AMD_INTERFACE_PARAMS;
+
+#define FUNC_0 0 // bit-placed for PCI address creation
+#define FUNC_1 1
+#define FUNC_2 2
+#define FUNC_3 3
+#define FUNC_4 4
+#define FUNC_5 5
+#define FUNC_6 6
+#define FUNC_7 7
+
+/// AGESA Binary module header structure
+typedef struct {
+ IN UINT32 Signature; ///< Binary Signature
+ IN CHAR8 CreatorID[8]; ///< 8 characters ID
+ IN CHAR8 Version[12]; ///< 12 characters version
+ IN UINT32 ModuleInfoOffset; ///< Offset of module
+ IN UINT32 EntryPointAddress; ///< Entry address
+ IN UINT32 ImageBase; ///< Image base
+ IN UINT32 RelocTableOffset; ///< Relocate Table offset
+ IN UINT32 ImageSize; ///< Size
+ IN UINT16 Checksum; ///< Checksum
+ IN UINT8 ImageType; ///< Type
+ IN UINT8 V_Reserved; ///< Reserved
+} AMD_IMAGE_HEADER;
+/// AGESA Binary module header structure
+typedef struct _AMD_MODULE_HEADER {
+ IN UINT32 ModuleHeaderSignature; ///< Module signature
+ IN CHAR8 ModuleIdentifier[8]; ///< 8 characters ID
+ IN CHAR8 ModuleVersion[12]; ///< 12 characters version
+ IN VOID *ModuleDispatcher; ///< A pointer point to dispatcher
+ IN struct _AMD_MODULE_HEADER *NextBlock; ///< Next module header link
+} AMD_MODULE_HEADER;
+
+// AMD_CODE_HEADER Signatures.
+#define AGESA_CODE_SIGNATURE {'!', '!', '!', 'A', 'G', 'E', 'S', 'A'}
+
+/// AGESA_CODE_SIGNATURE
+typedef struct {
+ IN CHAR8 Signature[8]; ///< code header Signature
+ IN CHAR8 ComponentName[16]; ///< 16 character name of the code module
+ IN CHAR8 Version[12]; ///< 12 character version string
+ IN CHAR8 TerminatorNull; ///< null terminated string
+ IN CHAR8 VerReserved[7]; ///< reserved space
+} AMD_CODE_HEADER;
+
+/// Extended PCI address format
+typedef struct {
+ IN OUT UINT32 Register:12; ///< Register offset
+ IN OUT UINT32 Function:3; ///< Function number
+ IN OUT UINT32 Device:5; ///< Device number
+ IN OUT UINT32 Bus:8; ///< Bus number
+ IN OUT UINT32 Segment:4; ///< Segment
+} EXT_PCI_ADDR;
+
+/// Union type for PCI address
+typedef union _PCI_ADDR {
+ IN UINT32 AddressValue; ///< Formal address
+ IN EXT_PCI_ADDR Address; ///< Extended address
+} PCI_ADDR;
+
+// SBDFO - Segment Bus Device Function Offset
+// 31:28 Segment (4-bits)
+// 27:20 Bus (8-bits)
+// 19:15 Device (5-bits)
+// 14:12 Function(3-bits)
+// 11:00 Offset (12-bits)
+
+#define MAKE_SBDFO(Seg, Bus, Dev, Fun, Off) ((((UINT32) (Seg)) << 28) | (((UINT32) (Bus)) << 20) | \
+ (((UINT32)(Dev)) << 15) | (((UINT32)(Fun)) << 12) | ((UINT32)(Off)))
+#define ILLEGAL_SBDFO 0xFFFFFFFFul
+
+/// CPUID data received registers format
+typedef struct {
+ OUT UINT32 EAX_Reg; ///< CPUID instruction result in EAX
+ OUT UINT32 EBX_Reg; ///< CPUID instruction result in EBX
+ OUT UINT32 ECX_Reg; ///< CPUID instruction result in ECX
+ OUT UINT32 EDX_Reg; ///< CPUID instruction result in EDX
+} CPUID_DATA;
+
+/// HT frequency for external callbacks
+typedef enum {
+ HT_FREQUENCY_200M = 0, ///< HT speed 200 for external callbacks
+ HT_FREQUENCY_400M = 2, ///< HT speed 400 for external callbacks
+ HT_FREQUENCY_600M = 4, ///< HT speed 600 for external callbacks
+ HT_FREQUENCY_800M = 5, ///< HT speed 800 for external callbacks
+ HT_FREQUENCY_1000M = 6, ///< HT speed 1000 for external callbacks
+ HT_FREQUENCY_1200M = 7, ///< HT speed 1200 for external callbacks
+ HT_FREQUENCY_1400M = 8, ///< HT speed 1400 for external callbacks
+ HT_FREQUENCY_1600M = 9, ///< HT speed 1600 for external callbacks
+ HT_FREQUENCY_1800M = 10, ///< HT speed 1800 for external callbacks
+ HT_FREQUENCY_2000M = 11, ///< HT speed 2000 for external callbacks
+ HT_FREQUENCY_2200M = 12, ///< HT speed 2200 for external callbacks
+ HT_FREQUENCY_2400M = 13, ///< HT speed 2400 for external callbacks
+ HT_FREQUENCY_2600M = 14, ///< HT speed 2600 for external callbacks
+ HT_FREQUENCY_2800M = 17, ///< HT speed 2800 for external callbacks
+ HT_FREQUENCY_3000M = 18, ///< HT speed 3000 for external callbacks
+ HT_FREQUENCY_3200M = 19, ///< HT speed 3200 for external callbacks
+ HT_FREQUENCY_MAX ///< Limit check.
+} HT_FREQUENCIES;
+// The minimum HT3 frequency
+#define HT3_FREQUENCY_MIN HT_FREQUENCY_1200M
+
+#ifndef BIT0
+ #define BIT0 0x0000000000000001ull
+#endif
+#ifndef BIT1
+ #define BIT1 0x0000000000000002ull
+#endif
+#ifndef BIT2
+ #define BIT2 0x0000000000000004ull
+#endif
+#ifndef BIT3
+ #define BIT3 0x0000000000000008ull
+#endif
+#ifndef BIT4
+ #define BIT4 0x0000000000000010ull
+#endif
+#ifndef BIT5
+ #define BIT5 0x0000000000000020ull
+#endif
+#ifndef BIT6
+ #define BIT6 0x0000000000000040ull
+#endif
+#ifndef BIT7
+ #define BIT7 0x0000000000000080ull
+#endif
+#ifndef BIT8
+ #define BIT8 0x0000000000000100ull
+#endif
+#ifndef BIT9
+ #define BIT9 0x0000000000000200ull
+#endif
+#ifndef BIT10
+ #define BIT10 0x0000000000000400ull
+#endif
+#ifndef BIT11
+ #define BIT11 0x0000000000000800ull
+#endif
+#ifndef BIT12
+ #define BIT12 0x0000000000001000ull
+#endif
+#ifndef BIT13
+ #define BIT13 0x0000000000002000ull
+#endif
+#ifndef BIT14
+ #define BIT14 0x0000000000004000ull
+#endif
+#ifndef BIT15
+ #define BIT15 0x0000000000008000ull
+#endif
+#ifndef BIT16
+ #define BIT16 0x0000000000010000ull
+#endif
+#ifndef BIT17
+ #define BIT17 0x0000000000020000ull
+#endif
+#ifndef BIT18
+ #define BIT18 0x0000000000040000ull
+#endif
+#ifndef BIT19
+ #define BIT19 0x0000000000080000ull
+#endif
+#ifndef BIT20
+ #define BIT20 0x0000000000100000ull
+#endif
+#ifndef BIT21
+ #define BIT21 0x0000000000200000ull
+#endif
+#ifndef BIT22
+ #define BIT22 0x0000000000400000ull
+#endif
+#ifndef BIT23
+ #define BIT23 0x0000000000800000ull
+#endif
+#ifndef BIT24
+ #define BIT24 0x0000000001000000ull
+#endif
+#ifndef BIT25
+ #define BIT25 0x0000000002000000ull
+#endif
+#ifndef BIT26
+ #define BIT26 0x0000000004000000ull
+#endif
+#ifndef BIT27
+ #define BIT27 0x0000000008000000ull
+#endif
+#ifndef BIT28
+ #define BIT28 0x0000000010000000ull
+#endif
+#ifndef BIT29
+ #define BIT29 0x0000000020000000ull
+#endif
+#ifndef BIT30
+ #define BIT30 0x0000000040000000ull
+#endif
+#ifndef BIT31
+ #define BIT31 0x0000000080000000ull
+#endif
+#ifndef BIT32
+ #define BIT32 0x0000000100000000ull
+#endif
+#ifndef BIT33
+ #define BIT33 0x0000000200000000ull
+#endif
+#ifndef BIT34
+ #define BIT34 0x0000000400000000ull
+#endif
+#ifndef BIT35
+ #define BIT35 0x0000000800000000ull
+#endif
+#ifndef BIT36
+ #define BIT36 0x0000001000000000ull
+#endif
+#ifndef BIT37
+ #define BIT37 0x0000002000000000ull
+#endif
+#ifndef BIT38
+ #define BIT38 0x0000004000000000ull
+#endif
+#ifndef BIT39
+ #define BIT39 0x0000008000000000ull
+#endif
+#ifndef BIT40
+ #define BIT40 0x0000010000000000ull
+#endif
+#ifndef BIT41
+ #define BIT41 0x0000020000000000ull
+#endif
+#ifndef BIT42
+ #define BIT42 0x0000040000000000ull
+#endif
+#ifndef BIT43
+ #define BIT43 0x0000080000000000ull
+#endif
+#ifndef BIT44
+ #define BIT44 0x0000100000000000ull
+#endif
+#ifndef BIT45
+ #define BIT45 0x0000200000000000ull
+#endif
+#ifndef BIT46
+ #define BIT46 0x0000400000000000ull
+#endif
+#ifndef BIT47
+ #define BIT47 0x0000800000000000ull
+#endif
+#ifndef BIT48
+ #define BIT48 0x0001000000000000ull
+#endif
+#ifndef BIT49
+ #define BIT49 0x0002000000000000ull
+#endif
+#ifndef BIT50
+ #define BIT50 0x0004000000000000ull
+#endif
+#ifndef BIT51
+ #define BIT51 0x0008000000000000ull
+#endif
+#ifndef BIT52
+ #define BIT52 0x0010000000000000ull
+#endif
+#ifndef BIT53
+ #define BIT53 0x0020000000000000ull
+#endif
+#ifndef BIT54
+ #define BIT54 0x0040000000000000ull
+#endif
+#ifndef BIT55
+ #define BIT55 0x0080000000000000ull
+#endif
+#ifndef BIT56
+ #define BIT56 0x0100000000000000ull
+#endif
+#ifndef BIT57
+ #define BIT57 0x0200000000000000ull
+#endif
+#ifndef BIT58
+ #define BIT58 0x0400000000000000ull
+#endif
+#ifndef BIT59
+ #define BIT59 0x0800000000000000ull
+#endif
+#ifndef BIT60
+ #define BIT60 0x1000000000000000ull
+#endif
+#ifndef BIT61
+ #define BIT61 0x2000000000000000ull
+#endif
+#ifndef BIT62
+ #define BIT62 0x4000000000000000ull
+#endif
+#ifndef BIT63
+ #define BIT63 0x8000000000000000ull
+#endif
+
+#endif // _AMD_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Dispatcher.h b/src/vendorcode/amd/agesa/f16kb/Dispatcher.h
new file mode 100644
index 0000000..eecdd0e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Dispatcher.h
@@ -0,0 +1,51 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Pushhigh Interface
+ *
+ * Contains interface to Pushhigh entry
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Legacy
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ */
+
+#ifndef _DISPATCHER_H_
+#define _DISPATCHER_H_
+
+// AGESA function prototypes
+AGESA_STATUS CALLCONV AmdAgesaDispatcher ( IN OUT VOID *ConfigPtr );
+AGESA_STATUS CALLCONV AmdAgesaCallout ( IN UINT32 Func, IN UINT32 Data, IN OUT VOID *ConfigPtr );
+
+#endif // _DISPATCHER_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/AdvancedApi.h b/src/vendorcode/amd/agesa/f16kb/Include/AdvancedApi.h
new file mode 100644
index 0000000..43794e3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/AdvancedApi.h
@@ -0,0 +1,166 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Advanced API Interface for HT, Memory and CPU
+ *
+ * Contains additional declarations need to use HT, Memory and CPU Advanced interface, such as
+ * would be required by the basic interface implementations.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Include
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+
+#ifndef _ADVANCED_API_H_
+#define _ADVANCED_API_H_
+
+/*----------------------------------------------------------------------------
+ * HT FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * A constructor for the HyperTransport input structure.
+ *
+ * Sets inputs to valid, basic level, defaults.
+ *
+ * @param[in] StdHeader Opaque handle to standard config header
+ * @param[in] AmdHtInterface HT Interface structure to initialize.
+ *
+ * @retval AGESA_SUCCESS Constructors are not allowed to fail
+*/
+AGESA_STATUS
+AmdHtInterfaceConstructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_HT_INTERFACE *AmdHtInterface
+ );
+
+/**
+ * The top level external interface for Hypertransport Initialization.
+ *
+ * Create our initial internal state, initialize the coherent fabric,
+ * initialize the non-coherent chains, and perform any required fabric tuning or
+ * optimization.
+ *
+ * @param[in] StdHeader Opaque handle to standard config header
+ * @param[in] PlatformConfiguration The platform configuration options.
+ * @param[in] AmdHtInterface HT Interface structure.
+ *
+ * @retval AGESA_SUCCESS Only information events logged.
+ * @retval AGESA_ALERT Sync Flood or CRC error logged.
+ * @retval AGESA_WARNING Example: expected capability not found
+ * @retval AGESA_ERROR logged events indicating some devices may not be available
+ * @retval AGESA_FATAL Mixed Family or MP capability mismatch
+ *
+ */
+AGESA_STATUS
+AmdHtInitialize (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfiguration,
+ IN AMD_HT_INTERFACE *AmdHtInterface
+ );
+
+/*----------------------------------------------------------------------------
+ * HT Recovery FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * A constructor for the HyperTransport input structure.
+ *
+ */
+AGESA_STATUS
+AmdHtResetConstructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_HT_RESET_INTERFACE *AmdHtResetInterface
+ );
+
+/**
+ * Initialize HT at Reset for both Normal and Recovery.
+ *
+ */
+AGESA_STATUS
+AmdHtInitReset (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_HT_RESET_INTERFACE *AmdHtResetInterface
+ );
+
+/**
+ * Initialize the Node and Socket maps for an AP Core.
+ *
+ */
+AGESA_STATUS
+AmdHtInitRecovery (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+///----------------------------------------------------------------------------
+/// MEMORY FUNCTIONS PROTOTYPE
+///
+///----------------------------------------------------------------------------
+
+AGESA_STATUS
+AmdMemRecovery (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+AGESA_STATUS
+AmdMemAuto (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+VOID
+AmdMemInitDataStructDef (
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN OUT PLATFORM_CONFIGURATION *PlatFormConfig
+ );
+
+VOID
+memDefRet ( VOID );
+
+BOOLEAN
+memDefTrue ( VOID );
+
+BOOLEAN
+memDefFalse ( VOID );
+
+VOID
+MemRecDefRet ( VOID );
+
+BOOLEAN
+MemRecDefTrue ( VOID );
+
+#endif // _ADVANCED_API_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/CommonReturns.h b/src/vendorcode/amd/agesa/f16kb/Include/CommonReturns.h
new file mode 100644
index 0000000..539acbc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/CommonReturns.h
@@ -0,0 +1,159 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Common Return routines.
+ *
+ * Routines which do nothing, returning a result (preferably some version of zero) which
+ * is consistent with "do nothing" or "default". Useful for function pointer tables.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Common
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _COMMON_RETURNS_H_
+#define _COMMON_RETURNS_H_
+
+
+/**
+* Return True
+*
+* @retval True Default case, no special action
+*/
+BOOLEAN
+CommonReturnTrue ( VOID );
+
+/**
+* Return False.
+*
+* @retval FALSE Default case, no special action
+*/
+BOOLEAN
+CommonReturnFalse ( VOID );
+
+/**
+ * Return (UINT8)zero.
+ *
+ *
+ * @retval zero None, or only case zero.
+ */
+UINT8
+CommonReturnZero8 ( VOID );
+
+/**
+ * Return (UINT32)zero.
+ *
+ *
+ * @retval zero None, or only case zero.
+ */
+UINT32
+CommonReturnZero32 ( VOID );
+
+/**
+ * Return (UINT64)zero.
+ *
+ *
+ * @retval zero None, or only case zero.
+ */
+UINT64
+CommonReturnZero64 ( VOID );
+
+/**
+ * Return (UINT8)one.
+ *
+ *
+ * @retval one None, or only case one.
+ */
+UINT8
+CommonReturnOne8 ( VOID );
+
+/**
+ * Return (UINT32)one.
+ *
+ *
+ * @retval one None, or only case one.
+ */
+UINT32
+CommonReturnOne32 ( VOID );
+
+/**
+ * Return (UINT64)one.
+ *
+ *
+ * @retval one None, or only case one.
+ */
+UINT64
+CommonReturnOne64 ( VOID );
+
+/**
+ * Return NULL
+ *
+ * @retval NULL pointer to nothing
+ */
+VOID *
+CommonReturnNULL ( VOID );
+
+/**
+* Return AGESA_SUCCESS.
+*
+* @retval AGESA_SUCCESS Success.
+*/
+AGESA_STATUS
+CommonReturnAgesaSuccess ( VOID );
+
+/**
+* Return AGESA_ERROR.
+*
+* @retval AGESA_ERROR Error.
+*/
+AGESA_STATUS
+CommonReturnAgesaError ( VOID );
+
+/**
+ * Do Nothing.
+ *
+ */
+VOID
+CommonVoid ( VOID );
+
+/**
+ * ASSERT if this routine is called.
+ *
+ */
+VOID
+CommonAssert ( VOID );
+
+#endif // _COMMON_RETURNS_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/Filecode.h b/src/vendorcode/amd/agesa/f16kb/Include/Filecode.h
new file mode 100644
index 0000000..a3b3472
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/Filecode.h
@@ -0,0 +1,581 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Collectively assign unique filecodes for assert and debug to each source file.
+ *
+ * Publish values for decorated filenames, which can be used for
+ * ASSERT and debug support using a preprocessor define like:
+ * @n <tt> \#define FILECODE MY_C_FILENAME_FILECODE </tt> @n
+ * This file serves as a reference for debugging to associate the code and filename.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Include
+ * @e \$Revision: 86079 $ @e \$Date: 2013-01-16 00:59:04 -0600 (Wed, 16 Jan 2013) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _FILECODE_H_
+#define _FILECODE_H_
+
+#define UNASSIGNED_FILE_FILECODE (0xFFFF)
+
+/// For debug use in any Platform's options C file.
+/// Can be reused for platforms and image builds, since only one options file can be built.
+#define PLATFORM_SPECIFIC_OPTIONS_FILECODE (0xBBBB)
+
+
+#define PROC_GNB_COMMON_GNBLIBFEATURES_FILECODE (0xA001)
+#define PROC_GNB_GNBINITATEARLY_FILECODE (0xA017)
+#define PROC_GNB_GNBINITATENV_FILECODE (0xA020)
+#define PROC_GNB_GNBINITATLATE_FILECODE (0xA021)
+#define PROC_GNB_GNBINITATMID_FILECODE (0xA022)
+#define PROC_GNB_GNBINITATPOST_FILECODE (0xA023)
+#define PROC_GNB_GNBINITATRESET_FILECODE (0xA024)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIB_FILECODE (0xA025)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBCPUACC_FILECODE (0xA026)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBHEAP_FILECODE (0xA027)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBIOACC_FILECODE (0xA028)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBMEMACC_FILECODE (0xA029)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBPCI_FILECODE (0xA02A)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBPCIACC_FILECODE (0xA030)
+#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXCARDINFO_FILECODE (0xA031)
+#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXENUMCONNECTORS_FILECODE (0xA032)
+#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXPOWERPLAYTABLE_FILECODE (0xA033)
+#define PROC_GNB_MODULES_GNBNBINITLIBV1_GNBNBINITLIBV1_FILECODE (0xA034)
+#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIECONFIGDATA_FILECODE (0xA036)
+#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIECONFIGLIB_FILECODE (0xA037)
+#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIEINPUTPARSER_FILECODE (0xA038)
+#define PROC_GNB_MODULES_GNBPCIECONFIG_PCIEMAPTOPOLOGY_FILECODE (0xA039)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEASPMBLACKLIST_FILECODE (0xA03B)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEASPMEXITLATENCY_FILECODE (0xA03C)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPHYSERVICES_FILECODE (0xA03D)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPIFSERVICES_FILECODE (0xA03E)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPORTREGACC_FILECODE (0xA03F)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPORTSERVICES_FILECODE (0xA041)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPOWERMGMT_FILECODE (0xA043)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIESILICONSERVICES_FILECODE (0xA045)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIETIMER_FILECODE (0xA046)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIETOPOLOGYSERVICES_FILECODE (0xA047)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEUTILITYLIB_FILECODE (0xA048)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEWRAPPERREGACC_FILECODE (0xA049)
+
+#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGENV_FILECODE (0xA08E)
+#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGPOST_FILECODE (0xA08F)
+#define PROC_GNB_MODULES_GNBTABLE_GNBTABLE_FILECODE (0xA090)
+#define PROC_GNB_MODULES_GNBGFXINITLIBV1_GNBGFXINITLIBV1_FILECODE (0xA091)
+#define PROC_GNB_MODULES_GNBIVRSLIB_GNBIVRSLIB_FILECODE (0xA0A8)
+#define PROC_GNB_MODULES_GNBNBINITLIBV4_GNBNBINITLIBV4_FILECODE (0xA0A9)
+#define PROC_GNB_MODULES_GNBFAMTRANSLATION_GNBPCIETRANSLATION_FILECODE (0xA0AA)
+
+#define PROC_GNB_MODULES_GNBSBLIB_GNBSBPCIE_FILECODE (0xA0BA)
+#define PROC_GNB_MODULES_GNBSBLIB_GNBSBLIB_FILECODE (0xA0BB)
+#define PROC_GNB_MODULES_GNBCOMMONLIB_GNBTIMERLIB_FILECODE (0xA0BD)
+#define PROC_GNB_MODULES_GNBPCIECONFIG_GNBHANDLELIB_FILECODE (0xA0C0)
+#define PROC_GNB_MODULES_GNBPCIEASPM_PCIEASPM_FILECODE (0xA0C2)
+
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPHYSERVICESV5_FILECODE (0xA0C5)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPIFSERVICESV5_FILECODE (0xA0C6)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPORTSERVICESV5_FILECODE (0xA0C7)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPOWERMGMTV5_FILECODE (0xA0C8)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIESILICONSERVICESV5_FILECODE (0xA0C9)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEWRAPPERSERVICESV5_FILECODE (0xA0CA)
+#define PROC_GNB_MODULES_GNBNBINITLIBV5_GNBNBINITLIBV5_FILECODE (0xA0CB)
+
+
+#define PROC_GNB_MODULES_GNBFAMTRANSLATION_GNBTRANSLATION_FILECODE (0xA0DB)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEPOWERMGMTV4_FILECODE (0xA0DC)
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEPORTSERVICESV4_FILECODE (0xA0DD)
+
+#define PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGMID_FILECODE (0xA0E0)
+
+#define PROC_GNB_MODULES_GNBIOAPIC_GNBIOAPIC_FILECODE (0xA0EE)
+
+#define PROC_GNB_MODULES_GNBPCIEMAXPAYLOAD_PCIEMAXPAYLOAD_FILECODE (0xA0F4)
+#define PROC_GNB_MODULES_GNBPCIECLKPM_PCIECLKPM_FILECODE (0xA0F5)
+
+#define PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIETOPOLOGYSERVICESV5_FILECODE (0xA100)
+#define PROC_GNB_MODULES_GNBPCIETRAININGV2_PCIETRAININGV2_FILECODE (0xA101)
+#define PROC_GNB_MODULES_GNBPCIETRAININGV2_PCIEWORKAROUNDSV2_FILECODE (0xA102)
+
+#define PROC_RECOVERY_GNB_GNBRECOVERY_FILECODE (0xAE01)
+#define PROC_RECOVERY_GNB_NBINITRECOVERY_FILECODE (0xAE02)
+#define PROC_GNB_GNBINITATS3SAVE_FILECODE (0xAE03)
+#define PROC_GNB_MODULES_GNBSVIEW_GNBSVIEW_FILECODE (0xAE04)
+
+
+#define PROC_GNB_MODULES_GNBINITKB_GFXENVINITKB_FILECODE (0xAE20)
+#define PROC_GNB_MODULES_GNBINITKB_GFXINTEGRATEDINFOTABLEKB_FILECODE (0xAE21)
+#define PROC_GNB_MODULES_GNBINITKB_GFXMIDINITKB_FILECODE (0xAE22)
+#define PROC_GNB_MODULES_GNBINITKB_GFXPOSTINITKB_FILECODE (0xAE23)
+#define PROC_GNB_MODULES_GNBINITKB_GFXLIBKB_FILECODE (0xAE24)
+#define PROC_GNB_MODULES_GNBINITKB_GNBEARLYINITKB_FILECODE (0xAE25)
+#define PROC_GNB_MODULES_GNBINITKB_GNBENVINITKB_FILECODE (0xAE26)
+#define PROC_GNB_MODULES_GNBINITKB_GNBMIDINITKB_FILECODE (0xAE27)
+#define PROC_GNB_MODULES_GNBINITKB_GNBPOSTINITKB_FILECODE (0xAE28)
+#define PROC_GNB_MODULES_GNBINITKB_GNBREGISTERACCKB_FILECODE (0xAE29)
+#define PROC_GNB_MODULES_GNBINITKB_PCIECOMPLEXDATAKB_FILECODE (0xAE2A)
+#define PROC_GNB_MODULES_GNBINITKB_PCIECONFIGKB_FILECODE (0xAE2B)
+#define PROC_GNB_MODULES_GNBINITKB_PCIEEARLYINITKB_FILECODE (0xAE2C)
+#define PROC_GNB_MODULES_GNBINITKB_PCIEENVINITKB_FILECODE (0xAE2D)
+#define PROC_GNB_MODULES_GNBINITKB_PCIEMIDINITKB_FILECODE (0xAE2F)
+#define PROC_GNB_MODULES_GNBINITKB_PCIEPOSTINITKB_FILECODE (0xAE30)
+#define PROC_GNB_MODULES_GNBINITKB_PCIELIBKB_FILECODE (0xAE31)
+#define PROC_GNB_MODULES_GNBINITKB_GFXGMCINITKB_FILECODE (0xAE32)
+#define PROC_GNB_MODULES_GNBPCIEALIBV2_PCIEALIBV2_FILECODE (0xAE33)
+#define PROC_GNB_MODULES_GNBINITKV_ALIBKVD_FILECODE (0xAE34)
+#define PROC_GNB_MODULES_GNBINITKV_GNBREGISTERXLATKV_FILECODE (0xAE37)
+#define PROC_GNB_MODULES_GNBINITKV_GNBFUSETABLEKV_FILECODE (0xAE39)
+#define PROC_GNB_MODULES_GNBINITKV_GNBURAKV_FILECODE (0xAE3B)
+#define PROC_GNB_MODULES_GNBINITKB_GNBURATOKENMAPKB_FILECODE (0xAE3E)
+#define PROC_GNB_MODULES_GNBINITBK_GNBURABK_FILECODE (0xAE3F)
+#define PROC_GNB_MODULES_GNBGFXINTTABLEV3_GFXINTEGRATEDINFOTABLE_FILECODE (0xAE42)
+#define PROC_GNB_MODULES_GNBGFXINTTABLEV3_GFXPWRPLAYTABLE_FILECODE (0xAE43)
+#define PROC_GNB_MODULES_GNBSCSLIBV1_GNBSCSLIBV1_FILECODE (0xAE44)
+#define PROC_GNB_MODULES_GNBINITKB_GFXSAMUINITKB_FILECODE (0xAE45)
+
+#define PROC_GNB_MODULES_GNBINITML_GFXENVINITML_FILECODE (0xAE50)
+
+// FCH
+#define PROC_FCH_AZALIA_AZALIARESET_FILECODE (0xB001)
+#define PROC_FCH_AZALIA_AZALIAENV_FILECODE (0xB002)
+#define PROC_FCH_AZALIA_AZALIAMID_FILECODE (0xB003)
+#define PROC_FCH_AZALIA_AZALIALATE_FILECODE (0xB004)
+#define PROC_FCH_COMMON_ACPILIB_FILECODE (0xB010)
+#define PROC_FCH_COMMON_FCHLIB_FILECODE (0xB011)
+#define PROC_FCH_COMMON_FCHCOMMON_FILECODE (0xB012)
+#define PROC_FCH_COMMON_FCHCOMMONSMM_FILECODE (0xB013)
+#define PROC_FCH_COMMON_MEMLIB_FILECODE (0xB014)
+#define PROC_FCH_COMMON_PCILIB_FILECODE (0xB015)
+#define PROC_FCH_COMMON_FCHPELIB_FILECODE (0xB016)
+#define PROC_FCH_GEC_GECRESET_FILECODE (0xB020)
+#define PROC_FCH_GEC_GECENV_FILECODE (0xB021)
+#define PROC_FCH_GEC_GECMID_FILECODE (0xB022)
+#define PROC_FCH_GEC_GECLATE_FILECODE (0xB023)
+#define PROC_FCH_GEC_FAMILY_YANGTZE_YANGTZEGECSERVICE_FILECODE (0xB028)
+#define PROC_FCH_GEC_FAMILY_YANGTZE_YANGTZEGECENVSERVICE_FILECODE (0xB029)
+#define PROC_FCH_HWACPI_HWACPIRESET_FILECODE (0xB030)
+#define PROC_FCH_HWACPI_HWACPIENV_FILECODE (0xB031)
+#define PROC_FCH_HWACPI_HWACPIMID_FILECODE (0xB032)
+#define PROC_FCH_HWACPI_HWACPILATE_FILECODE (0xB033)
+#define PROC_FCH_HWACPI_FAMILY_YANGTZE_YANGTZEHWACPIENVSERVICE_FILECODE (0xB03C)
+#define PROC_FCH_HWACPI_FAMILY_YANGTZE_YANGTZEHWACPIMIDSERVICE_FILECODE (0xB03D)
+#define PROC_FCH_HWACPI_FAMILY_YANGTZE_YANGTZEHWACPILATESERVICE_FILECODE (0xB03E)
+#define PROC_FCH_HWACPI_FAMILY_YANGTZE_YANGTZESSSERVICE_FILECODE (0xB03F)
+#define PROC_FCH_HWM_HWMRESET_FILECODE (0xB050)
+#define PROC_FCH_HWM_HWMENV_FILECODE (0xB051)
+#define PROC_FCH_HWM_HWMMID_FILECODE (0xB052)
+#define PROC_FCH_HWM_HWMLATE_FILECODE (0xB053)
+#define PROC_FCH_HWM_FAMILY_YANGTZE_YANGTZEHWMENVSERVICE_FILECODE (0xB05A)
+#define PROC_FCH_HWM_FAMILY_YANGTZE_YANGTZEHWMMIDSERVICE_FILECODE (0xB05B)
+#define PROC_FCH_HWM_FAMILY_YANGTZE_YANGTZEHWMLATESERVICE_FILECODE (0xB05C)
+#define PROC_FCH_IMC_IMCENV_FILECODE (0xB060)
+#define PROC_FCH_IMC_IMCMID_FILECODE (0xB061)
+#define PROC_FCH_IMC_IMCLATE_FILECODE (0xB062)
+#define PROC_FCH_IMC_IMCLIB_FILECODE (0xB063)
+#define PROC_FCH_IMC_IMCRESET_FILECODE (0xB064)
+#define PROC_FCH_IMC_FCHECENV_FILECODE (0xB065)
+#define PROC_FCH_IMC_FCHECMID_FILECODE (0xB066)
+#define PROC_FCH_IMC_FCHECLATE_FILECODE (0xB067)
+#define PROC_FCH_IMC_FCHECRESET_FILECODE (0xB068)
+#define PROC_FCH_IMC_FAMILY_HUDSON2_HUDSON2IMCSERVICE_FILECODE (0xB069)
+#define PROC_FCH_IMC_FAMILY_YUBA_YUBAIMCSERVICE_FILECODE (0xB06A)
+#define PROC_FCH_IMC_FAMILY_YANGTZE_YANGTZEIMCSERVICE_FILECODE (0xB06B)
+#define PROC_FCH_IMC_FAMILY_AVALON_AVALONIMCSERVICE_FILECODE (0xB36B)
+#define PROC_FCH_IDE_IDEENV_FILECODE (0xB06D)
+#define PROC_FCH_IDE_IDEMID_FILECODE (0xB06E)
+#define PROC_FCH_IDE_IDELATE_FILECODE (0xB06F)
+#define PROC_FCH_INTERFACE_INITRESETDEF_FILECODE (0xB070)
+#define PROC_FCH_INTERFACE_INITENVDEF_FILECODE (0xB071)
+#define PROC_FCH_INTERFACE_FCHINITRESET_FILECODE (0xB072)
+#define PROC_FCH_INTERFACE_FCHINITENV_FILECODE (0xB073)
+#define PROC_FCH_INTERFACE_FCHINITLATE_FILECODE (0xB074)
+#define PROC_FCH_INTERFACE_FCHINITMID_FILECODE (0xB075)
+#define PROC_FCH_INTERFACE_FCHINITS3_FILECODE (0xB076)
+#define PROC_FCH_INTERFACE_FCHTASKLAUNCHER_FILECODE (0xB077)
+#define PROC_FCH_IR_IRENV_FILECODE (0xB080)
+#define PROC_FCH_IR_IRMID_FILECODE (0xB081)
+#define PROC_FCH_IR_IRLATE_FILECODE (0xB082)
+#define PROC_FCH_PCIB_PCIBRESET_FILECODE (0xB090)
+#define PROC_FCH_PCIB_PCIBENV_FILECODE (0xB091)
+#define PROC_FCH_PCIB_PCIBMID_FILECODE (0xB092)
+#define PROC_FCH_PCIB_PCIBLATE_FILECODE (0xB093)
+#define PROC_FCH_PCIE_ABRESET_FILECODE (0xB0A0)
+#define PROC_FCH_PCIE_ABENV_FILECODE (0xB0A1)
+#define PROC_FCH_PCIE_ABMID_FILECODE (0xB0A2)
+#define PROC_FCH_PCIE_ABLATE_FILECODE (0xB0A3)
+#define PROC_FCH_PCIE_GPPHP_FILECODE (0xB0A4)
+#define PROC_FCH_PCIE_GPPLIB_FILECODE (0xB0A5)
+#define PROC_FCH_PCIE_GPPRESET_FILECODE (0xB0A6)
+#define PROC_FCH_PCIE_GPPENV_FILECODE (0xB0A7)
+#define PROC_FCH_PCIE_GPPMID_FILECODE (0xB0A8)
+#define PROC_FCH_PCIE_GPPLATE_FILECODE (0xB0A9)
+#define PROC_FCH_PCIE_PCIERESET_FILECODE (0xB0AA)
+#define PROC_FCH_PCIE_PCIEENV_FILECODE (0xB0AB)
+#define PROC_FCH_PCIE_PCIEMID_FILECODE (0xB0AC)
+#define PROC_FCH_PCIE_PCIELATE_FILECODE (0xB0AD)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2ABRESETSERVICE_FILECODE (0xB0AE)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2ABENVSERVICE_FILECODE (0xB0AF)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2ABSERVICE_FILECODE (0xB0B0)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2GPPRESETSERVICE_FILECODE (0xB0B1)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2GPPSERVICE_FILECODE (0xB0B2)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2PCIEENVSERVICE_FILECODE (0xB0B3)
+#define PROC_FCH_PCIE_FAMILY_HUDSON2_HUDSON2PCIESERVICE_FILECODE (0xB0B4)
+#define PROC_FCH_PCIE_FAMILY_YUBA_YUBAABRESETSERVICE_FILECODE (0xB0B5)
+#define PROC_FCH_PCIE_FAMILY_YUBA_YUBAABENVSERVICE_FILECODE (0xB0B6)
+#define PROC_FCH_PCIE_FAMILY_YUBA_YUBAABSERVICE_FILECODE (0xB0B7)
+#define PROC_FCH_PCIE_FAMILY_YANGTZE_YANGTZEABRESETSERVICE_FILECODE (0xB0B8)
+#define PROC_FCH_PCIE_FAMILY_YANGTZE_YANGTZEABENVSERVICE_FILECODE (0xB0B9)
+#define PROC_FCH_PCIE_FAMILY_YANGTZE_YANGTZEABSERVICE_FILECODE (0xB0BA)
+#define PROC_FCH_PCIE_FAMILY_AVALON_AVALONABRESETSERVICE_FILECODE (0xB3B8)
+#define PROC_FCH_PCIE_FAMILY_AVALON_AVALONABENVSERVICE_FILECODE (0xB3B9)
+#define PROC_FCH_PCIE_FAMILY_AVALON_AVALONABSERVICE_FILECODE (0xB3BA)
+#define PROC_FCH_SATA_AHCIENV_FILECODE (0xB0C0)
+#define PROC_FCH_SATA_AHCIMID_FILECODE (0xB0C1)
+#define PROC_FCH_SATA_AHCILATE_FILECODE (0xB0C2)
+#define PROC_FCH_SATA_AHCILIB_FILECODE (0xB0C3)
+#define PROC_FCH_SATA_IDE2AHCIENV_FILECODE (0xB0C4)
+#define PROC_FCH_SATA_IDE2AHCIMID_FILECODE (0xB0C5)
+#define PROC_FCH_SATA_IDE2AHCILATE_FILECODE (0xB0C6)
+#define PROC_FCH_SATA_IDE2AHCILIB_FILECODE (0xB0C7)
+#define PROC_FCH_SATA_RAIDENV_FILECODE (0xB0C8)
+#define PROC_FCH_SATA_RAIDMID_FILECODE (0xB0C9)
+#define PROC_FCH_SATA_RAIDLATE_FILECODE (0xB0CA)
+#define PROC_FCH_SATA_RAIDLIB_FILECODE (0xB0CB)
+#define PROC_FCH_SATA_SATAENV_FILECODE (0xB0CC)
+#define PROC_FCH_SATA_SATAENVLIB_FILECODE (0xB0CD)
+#define PROC_FCH_SATA_SATAIDEENV_FILECODE (0xB0CE)
+#define PROC_FCH_SATA_SATAIDEMID_FILECODE (0xB0CF)
+#define PROC_FCH_SATA_SATAIDELATE_FILECODE (0xB0D0)
+#define PROC_FCH_SATA_SATAIDELIB_FILECODE (0xB0D1)
+#define PROC_FCH_SATA_SATAMID_FILECODE (0xB0D2)
+#define PROC_FCH_SATA_SATALATE_FILECODE (0xB0D3)
+#define PROC_FCH_SATA_SATALIB_FILECODE (0xB0D4)
+#define PROC_FCH_SATA_SATARESET_FILECODE (0xB0D5)
+#define PROC_FCH_SATA_FAMILY_HUDSON2_HUDSON2SATARESETSERVICE_FILECODE (0xB0D6)
+#define PROC_FCH_SATA_FAMILY_HUDSON2_HUDSON2SATAENVSERVICE_FILECODE (0xB0D7)
+#define PROC_FCH_SATA_FAMILY_HUDSON2_HUDSON2SATASERVICE_FILECODE (0xB0D8)
+#define PROC_FCH_SATA_FAMILY_YUBA_YUBASATARESETSERVICE_FILECODE (0xB0D9)
+#define PROC_FCH_SATA_FAMILY_YUBA_YUBASATAENVSERVICE_FILECODE (0xB0DA)
+#define PROC_FCH_SATA_FAMILY_YUBA_YUBASATASERVICE_FILECODE (0xB0DB)
+#define PROC_FCH_SATA_FAMILY_YANGTZE_YANGTZESATARESETSERVICE_FILECODE (0xB0DC)
+#define PROC_FCH_SATA_FAMILY_YANGTZE_YANGTZESATAENVSERVICE_FILECODE (0xB0DD)
+#define PROC_FCH_SATA_FAMILY_YANGTZE_YANGTZESATASERVICE_FILECODE (0xB0DE)
+#define PROC_FCH_SD_SDENV_FILECODE (0xB0E0)
+#define PROC_FCH_SD_SDMID_FILECODE (0xB0E1)
+#define PROC_FCH_SD_SDLATE_FILECODE (0xB0E2)
+#define PROC_FCH_SD_FAMILY_YANGTZE_YANGTZESDSERVICE_FILECODE (0xB0E9)
+#define PROC_FCH_SD_FAMILY_YANGTZE_YANGTZESDRESETSERVICE_FILECODE (0xB0EA)
+#define PROC_FCH_SD_FAMILY_YANGTZE_YANGTZESDENVSERVICE_FILECODE (0xB0EB)
+#define PROC_FCH_SPI_LPCRESET_FILECODE (0xB0F0)
+#define PROC_FCH_SPI_LPCENV_FILECODE (0xB0F1)
+#define PROC_FCH_SPI_LPCMID_FILECODE (0xB0F2)
+#define PROC_FCH_SPI_LPCLATE_FILECODE (0xB0F3)
+#define PROC_FCH_SPI_SPIRESET_FILECODE (0xB0F4)
+#define PROC_FCH_SPI_SPIENV_FILECODE (0xB0F5)
+#define PROC_FCH_SPI_SPIMID_FILECODE (0xB0F6)
+#define PROC_FCH_SPI_SPILATE_FILECODE (0xB0F7)
+#define PROC_FCH_SPI_FAMILY_YANGTZE_YANGTZELPCENVSERVICE_FILECODE (0xB0FE)
+#define PROC_FCH_SPI_FAMILY_YANGTZE_YANGTZELPCRESETSERVICE_FILECODE (0xB0FF)
+#define PROC_FCH_USB_EHCIRESET_FILECODE (0xB100)
+#define PROC_FCH_USB_EHCIENV_FILECODE (0xB101)
+#define PROC_FCH_USB_EHCIMID_FILECODE (0xB102)
+#define PROC_FCH_USB_EHCILATE_FILECODE (0xB103)
+#define PROC_FCH_USB_OHCIRESET_FILECODE (0xB104)
+#define PROC_FCH_USB_OHCIENV_FILECODE (0xB105)
+#define PROC_FCH_USB_OHCIMID_FILECODE (0xB106)
+#define PROC_FCH_USB_OHCILATE_FILECODE (0xB107)
+#define PROC_FCH_USB_USBRESET_FILECODE (0xB108)
+#define PROC_FCH_USB_USBENV_FILECODE (0xB109)
+#define PROC_FCH_USB_USBMID_FILECODE (0xB10A)
+#define PROC_FCH_USB_USBLATE_FILECODE (0xB10B)
+#define PROC_FCH_USB_XHCIRESET_FILECODE (0xB10C)
+#define PROC_FCH_USB_XHCIENV_FILECODE (0xB10D)
+#define PROC_FCH_USB_XHCIMID_FILECODE (0xB10E)
+#define PROC_FCH_USB_XHCILATE_FILECODE (0xB10F)
+#define PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEEHCIENVSERVICE_FILECODE (0xB124)
+#define PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEEHCIMIDSERVICE_FILECODE (0xB125)
+#define PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEEHCILATESERVICE_FILECODE (0xB126)
+#define PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEOHCIENVSERVICE_FILECODE (0xB127)
+#define PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEOHCIMIDSERVICE_FILECODE (0xB128)
+#define PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEOHCILATESERVICE_FILECODE (0xB129)
+#define PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEXHCIRESETSERVICE_FILECODE (0xB12A)
+#define PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEXHCIENVSERVICE_FILECODE (0xB12B)
+#define PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEXHCIMIDSERVICE_FILECODE (0xB12C)
+#define PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEXHCILATESERVICE_FILECODE (0xB12D)
+#define PROC_FCH_USB_XHCIRECOVERY_FILECODE (0xB12E)
+#define PROC_FCH_PCIE_GPPPORTINIT_FILECODE (0xB12F)
+#define PROC_FCH_PCIE_GPPALLINONE_FILECODE (0xB2C0)
+
+#define LIB_AMDLIB_FILECODE (0xC001)
+
+#define LEGACY_PROC_AGESACALLOUTS_FILECODE (0xC010)
+#define LEGACY_PROC_HOBTRANSFER_FILECODE (0xC011)
+#define LEGACY_PROC_DISPATCHER_FILECODE (0xC012)
+
+
+#define PROC_COMMON_AMDINITEARLY_FILECODE (0xC020)
+#define PROC_COMMON_AMDINITENV_FILECODE (0xC021)
+#define PROC_COMMON_AMDINITLATE_FILECODE (0xC022)
+#define PROC_COMMON_AMDINITMID_FILECODE (0xC023)
+#define PROC_COMMON_AMDINITPOST_FILECODE (0xC024)
+#define PROC_COMMON_AMDINITRECOVERY_FILECODE (0xC025)
+#define PROC_COMMON_AMDINITRESET_FILECODE (0xC026)
+#define PROC_COMMON_AMDINITRESUME_FILECODE (0xC027)
+#define PROC_COMMON_AMDS3LATERESTORE_FILECODE (0xC028)
+#define PROC_COMMON_AMDS3SAVE_FILECODE (0xC029)
+#define PROC_COMMON_AMDLATERUNAPTASK_FILECODE (0xC02A)
+
+#define PROC_COMMON_COMMONRETURNS_FILECODE (0xC0C0)
+#define PROC_COMMON_CREATESTRUCT_FILECODE (0xC0D0)
+#define PROC_COMMON_COMMONINITS_FILECODE (0xC0F0)
+#define PROC_COMMON_S3RESTORESTATE_FILECODE (0xC0F8)
+#define PROC_COMMON_S3SAVESTATE_FILECODE (0xC0F9)
+
+#define PROC_CPU_CPUAPICUTILITIES_FILECODE (0xC401)
+#define PROC_CPU_TABLE_FILECODE (0xC403)
+#define PROC_CPU_TABLEHT_FILECODE (0xC404)
+#define PROC_CPU_CPUEARLYINIT_FILECODE (0xC405)
+#define PROC_CPU_CPUEVENTLOG_FILECODE (0xC406)
+#define PROC_CPU_CPUFAMILYTRANSLATION_FILECODE (0xC407)
+#define PROC_CPU_CPUGENERALSERVICES_FILECODE (0xC408)
+#define PROC_CPU_CPULATEINIT_FILECODE (0xC40A)
+#define PROC_CPU_CPUMICROCODEPATCH_FILECODE (0xC40B)
+#define PROC_CPU_CPUWARMRESET_FILECODE (0xC40C)
+#define PROC_CPU_HEAPMANAGER_FILECODE (0xC40D)
+#define PROC_CPU_CPUBIST_FILECODE (0xC40E)
+#define PROC_CPU_MMIOMAPMANAGER_FILECODE (0xC40F)
+
+#define PROC_CPU_CPUPOSTINIT_FILECODE (0xC420)
+#define PROC_CPU_CPUPOWERMGMT_FILECODE (0xC430)
+#define PROC_CPU_CPUPOWERMGMTMULTISOCKET_FILECODE (0xC431)
+#define PROC_CPU_CPUPOWERMGMTSINGLESOCKET_FILECODE (0xC432)
+#define PROC_CPU_S3_FILECODE (0xC460)
+
+// Family 15h
+
+
+
+// Family 16h
+#define PROC_CPU_FAMILY_0X16_CPUF16BRANDID_FILECODE (0xCC00)
+#define PROC_CPU_FAMILY_0X16_CPUF16UTILITIES_FILECODE (0xCC01)
+#define PROC_CPU_FAMILY_0X16_CPUF16WHEAINITDATATABLES_FILECODE (0xCC02)
+#define PROC_CPU_FAMILY_0X16_CPUF16CACHEDEFAULTS_FILECODE (0xCC03)
+#define PROC_CPU_FAMILY_0X16_CPUF16DMI_FILECODE (0xCC04)
+#define PROC_CPU_FAMILY_0X16_CPUF16PCIUNKNOWNTABLES_FILECODE (0xCC05)
+#define PROC_CPU_FAMILY_0X16_CPUF16MSRUNKNOWNTABLES_FILECODE (0xCC06)
+#define PROC_CPU_FAMILY_0X16_CPUF16PSTATEHPCMODE_FILECODE (0xCC07)
+#define PROC_CPU_FAMILY_0X16_CPUF16MMIOMAP_FILECODE (0xCC08)
+#define PROC_CPU_FAMILY_0X16_CPUF16PREFETCHMODE_FILECODE (0xCC09)
+#define PROC_CPU_FAMILY_0X16_CPUF16APM_FILECODE (0xCC0A)
+#define PROC_CPU_FAMILY_0X16_CPUF16CRAT_FILECODE (0xCC0B)
+
+#define PROC_CPU_FAMILY_0X16_KB_F16KBLOGICALIDTABLES_FILECODE (0xCC20)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBINITEARLYTABLE_FILECODE (0xCC21)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBEQUIVALENCETABLE_FILECODE (0xCC22)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBMICROCODEPATCHTABLES_FILECODE (0xCC23)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBPCITABLES_FILECODE (0xCC24)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBMSRTABLES_FILECODE (0xCC25)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBSHAREDMSRTABLE_FILECODE (0xCC26)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBUTILITIES_FILECODE (0xCC27)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBC6STATE_FILECODE (0xCC28)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBCOREAFTERRESET_FILECODE (0xCC29)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBCPB_FILECODE (0xCC2A)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBDMI_FILECODE (0xCC2B)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBIOCSTATE_FILECODE (0xCC2C)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBNBAFTERRESET_FILECODE (0xCC2D)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBPOWERCHECK_FILECODE (0xCC2E)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBPSTATE_FILECODE (0xCC2F)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBPSI_FILECODE (0xCC30)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBHTC_FILECODE (0xCC31)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBPOWERMGMTSYSTEMTABLES_FILECODE (0xCC32)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBSCS_FILECODE (0xCC33)
+#define PROC_CPU_FAMILY_0X16_KB_F16KBCACHEFLUSHONHALT_FILECODE (0xCC34)
+
+
+#define PROC_CPU_FEATURE_CPUCACHEFLUSHONHALT_FILECODE (0xDC01)
+#define PROC_CPU_FEATURE_CPUCACHEINIT_FILECODE (0xDC02)
+#define PROC_CPU_FEATURE_CPUDMI_FILECODE (0xDC10)
+#define PROC_CPU_FEATURE_CPUFEATURELEVELING_FILECODE (0xDC20)
+#define PROC_CPU_FEATURE_CPUL3FEATURES_FILECODE (0xDC30)
+#define PROC_CPU_FEATURE_CPUPSTATEGATHER_FILECODE (0xDC41)
+#define PROC_CPU_FEATURE_CPUPSTATELEVELING_FILECODE (0xDC42)
+#define PROC_CPU_FEATURE_CPUPSTATETABLES_FILECODE (0xDC43)
+#define PROC_CPU_FEATURE_CPUSLIT_FILECODE (0xDC50)
+#define PROC_CPU_FEATURE_CPUSRAT_FILECODE (0xDC60)
+#define PROC_CPU_FEATURE_CPUWHEA_FILECODE (0xDC70)
+#define PROC_CPU_FEATURE_CPUC6STATE_FILECODE (0xDC82)
+#define PROC_CPU_FEATURE_CPUCPB_FILECODE (0xDC83)
+#define PROC_CPU_FEATURE_CPULOWPWRPSTATE_FILECODE (0xDC84)
+#define PROC_CPU_FEATURE_CPUIOCSTATE_FILECODE (0xDC85)
+#define PROC_CPU_FEATURE_CPUPSTATEHPCMODE_FILECODE (0xDC86)
+#define PROC_CPU_FEATURE_CPUAPM_FILECODE (0xDC87)
+#define PROC_CPU_FEATURE_CPUFEATURES_FILECODE (0xDC90)
+#define PROC_CPU_FEATURE_CPUMSGBASEDC1E_FILECODE (0xDCA0)
+#define PROC_CPU_FEATURE_CPUCORELEVELING_FILECODE (0xDCB0)
+#define PROC_CPU_FEATURE_PRESERVEMAILBOX_FILECODE (0xDCC0)
+#define PROC_CPU_FEATURE_CPUPSI_FILECODE (0xDCC1)
+#define PROC_CPU_FEATURE_CPUHTC_FILECODE (0xDCC2)
+#define PROC_CPU_FEATURE_CPUCRAT_FILECODE (0xDCD0)
+#define PROC_CPU_FEATURE_CPUCDIT_FILECODE (0xDCD1)
+#define PROC_CPU_FEATURE_CPUTDPLIMITING_FILECODE (0xDCD2)
+#define PROC_CPU_FEATURE_CPUPREFETCHMODE_FILECODE (0xDCD3)
+#define PROC_CPU_FEATURE_CPUSCS_FILECODE (0xDCD4)
+
+
+#define PROC_IDS_CONTROL_IDSCTRL_FILECODE (0xE801)
+#define PROC_IDS_LIBRARY_IDSLIB_FILECODE (0xE802)
+#define PROC_IDS_DEBUG_IDSDEBUG_FILECODE (0xE803)
+#define PROC_IDS_PERF_IDSPERF_FILECODE (0xE804)
+#define PROC_IDS_LIBRARY_IDSREGACC_FILECODE (0xE810)
+#define PROC_IDS_DEBUG_IDSDPHDTOUT_FILECODE (0xE811)
+#define PROC_IDS_DEBUG_IDSDEBUGPRINT_FILECODE (0xE812)
+#define PROC_IDS_DEBUG_IDSDPSERIAL_FILECODE (0xE813)
+#define PROC_IDS_DEBUG_IDSDPREDIRECTIO_FILECODE (0xE814)
+#define PROC_IDS_DEBUG_IDSDPRAM_FILECODE (0xE815)
+
+#define PROC_IDS_DEBUG_IDSIDTTABLE_FILECODE (0xE81E)
+#define PROC_IDS_CONTROL_IDSNVTOCMOS_FILECODE (0xE81F)
+#define PROC_IDS_FAMILY_0X16_KB_IDSF16KBALLSERVICE_FILECODE (0xE821)
+
+///0xE820 ~ 0xE840 is reserved for ids extend module
+
+#define PROC_MEM_ARDK_MA_FILECODE (0xF001)
+
+#define PROC_MEM_FEAT_CHINTLV_MFCHI_FILECODE (0xF081)
+#define PROC_MEM_FEAT_CSINTLV_MFCSI_FILECODE (0xF082)
+#define PROC_MEM_FEAT_ECC_MFECC_FILECODE (0xF083)
+#define PROC_MEM_FEAT_ECC_MFEMP_FILECODE (0xF085)
+#define PROC_MEM_FEAT_EXCLUDIMM_MFDIMMEXCLUD_FILECODE (0xF086)
+#define PROC_MEM_FEAT_IDENDIMM_MFIDENDIMM_FILECODE (0xF088)
+#define PROC_MEM_FEAT_LVDDR3_MFLVDDR3_FILECODE (0xF08A)
+#define PROC_MEM_FEAT_MEMCLR_MFMEMCLR_FILECODE (0xF08B)
+#define PROC_MEM_FEAT_ODTHERMAL_MFODTHERMAL_FILECODE (0xF08D)
+#define PROC_MEM_FEAT_PARTRN_MFPARALLELTRAINING_FILECODE (0xF08F)
+#define PROC_MEM_FEAT_PARTRN_MFSTANDARDTRAINING_FILECODE (0xF091)
+#define PROC_MEM_FEAT_S3_MFS3_FILECODE (0xF092)
+#define PROC_MEM_FEAT_TABLE_MFTDS_FILECODE (0xF093)
+#define PROC_MEM_FEAT_CRAT_MFCRAT_FILECODE (0xF095)
+#define PROC_MEM_FEAT_DATAEYE_MF2DDATAEYE_FILECODE (0xF097)
+#define PROC_MEM_FEAT_RDWR2DTRAINING_MFWRDAT2DTRAINING_FILECODE (0xF098)
+#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DEYERIMSEARCH_FILECODE (0xF099)
+#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDDQS2DTRAINING_FILECODE (0xF09A)
+#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DTRAINING_FILECODE (0xF09B)
+#define PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DPATTERNGENERATION_FILECODE (0xF09C)
+#define PROC_MEM_FEAT_RDWR2DTRAINING_KB_MFRDWR2DKB_FILECODE (0xF09D)
+#define PROC_MEM_FEAT_RDWR2DTRAINING_ML_MFRDWR2DML_FILECODE (0xF09E)
+#define PROC_MEM_FEAT_AGGRESSOR_MFAGGRESSOR_FILECODE (0xF09F)
+
+#define PROC_MEM_MAIN_MDEF_FILECODE (0xF101)
+#define PROC_MEM_MAIN_MINIT_FILECODE (0xF102)
+#define PROC_MEM_MAIN_MM_FILECODE (0xF103)
+#define PROC_MEM_FEAT_DMI_MFDMI_FILECODE (0xF104)
+#define PROC_MEM_MAIN_MMECC_FILECODE (0xF105)
+#define PROC_MEM_MAIN_MMEXCLUDEDIMM_FILECODE (0xF106)
+#define PROC_MEM_MAIN_MMNODEINTERLEAVE_FILECODE (0xF10B)
+#define PROC_MEM_MAIN_MMONLINESPARE_FILECODE (0xF10C)
+#define PROC_MEM_MAIN_MMPARALLELTRAINING_FILECODE (0xF10D)
+#define PROC_MEM_MAIN_MMSTANDARDTRAINING_FILECODE (0xF10E)
+#define PROC_MEM_MAIN_MUC_FILECODE (0xF10F)
+#define PROC_MEM_MAIN_MMMEMCLR_FILECODE (0xF110)
+#define PROC_MEM_MAIN_MMFLOW_FILECODE (0xF112)
+#define PROC_MEM_MAIN_MERRHDL_FILECODE (0xF113)
+#define PROC_MEM_MAIN_MMLVDDR3_FILECODE (0xF115)
+#define PROC_MEM_MAIN_MMUMAALLOC_FILECODE (0xF116)
+#define PROC_MEM_MAIN_MMMEMRESTORE_FILECODE (0xF117)
+#define PROC_MEM_MAIN_MMCONDITIONALPSO_FILECODE (0xF118)
+#define PROC_MEM_MAIN_MMAGGRESSOR_FILECODE (0xF119)
+#define PROC_MEM_MAIN_KB_MMFLOWKB_FILECODE (0xF124)
+
+#define PROC_MEM_NB_MN_FILECODE (0XF27C)
+#define PROC_MEM_NB_MNDCT_FILECODE (0XF27D)
+#define PROC_MEM_NB_MNPHY_FILECODE (0XF27E)
+#define PROC_MEM_NB_MNMCT_FILECODE (0XF27F)
+#define PROC_MEM_NB_MNS3_FILECODE (0XF280)
+#define PROC_MEM_NB_MNFLOW_FILECODE (0XF281)
+#define PROC_MEM_NB_MNFEAT_FILECODE (0XF282)
+#define PROC_MEM_NB_MNTRAIN3_FILECODE (0XF284)
+#define PROC_MEM_NB_MNREG_FILECODE (0XF285)
+#define PROC_MEM_NB_MNPMU_FILECODE (0xF2B7)
+#define PROC_MEM_NB_KB_MNREGKB_FILECODE (0XF2B8)
+#define PROC_MEM_NB_KB_MNKB_FILECODE (0XF2B9)
+#define PROC_MEM_NB_KB_MNMCTKB_FILECODE (0XF2BA)
+#define PROC_MEM_NB_KB_MNOTKB_FILECODE (0XF2BB)
+#define PROC_MEM_NB_KB_MNDCTKB_FILECODE (0XF2BC)
+#define PROC_MEM_NB_KB_MNPHYKB_FILECODE (0XF2BD)
+#define PROC_MEM_NB_KB_MNS3KB_FILECODE (0XF2BE)
+#define PROC_MEM_NB_KB_MNIDENDIMMKB_FILECODE (0XF2BF)
+#define PROC_MEM_NB_KB_MNFLOWKB_FILECODE (0XF2C0)
+#define PROC_MEM_NB_KB_MNPROTOKB_FILECODE (0XF2C1)
+
+
+#define PROC_MEM_PS_MP_FILECODE (0XF401)
+#define PROC_MEM_PS_MPRTT_FILECODE (0XF422)
+#define PROC_MEM_PS_MPMAXFREQ_FILECODE (0XF423)
+#define PROC_MEM_PS_MPODTPAT_FILECODE (0XF424)
+#define PROC_MEM_PS_MPSAO_FILECODE (0XF425)
+#define PROC_MEM_PS_MPMR0_FILECODE (0XF426)
+#define PROC_MEM_PS_MPRC2IBT_FILECODE (0XF427)
+#define PROC_MEM_PS_MPRC10OPSPD_FILECODE (0XF428)
+#define PROC_MEM_PS_MPLRIBT_FILECODE (0XF429)
+#define PROC_MEM_PS_MPLRNPR_FILECODE (0XF42A)
+#define PROC_MEM_PS_MPLRNLR_FILECODE (0XF42B)
+#define PROC_MEM_PS_MPS2D_FILECODE (0XF436)
+#define PROC_MEM_PS_MPSEEDS_FILECODE (0XF437)
+#define PROC_MEM_PS_KB_MPSKB3_FILECODE (0XF438)
+#define PROC_MEM_PS_KB_MPKB3_FILECODE (0XF439)
+#define PROC_MEM_PS_KB_MPUKB3_FILECODE (0XF43A)
+#define PROC_MEM_PS_KB_FT3_MPSKBFT3_FILECODE (0XF43B)
+#define PROC_MEM_PS_MPCADCFG_FILECODE (0XF43C)
+#define PROC_MEM_PS_MPDATACFG_FILECODE (0XF43D)
+
+#define PROC_MEM_TECH_MT_FILECODE (0XF501)
+#define PROC_MEM_TECH_MTHDI_FILECODE (0XF502)
+#define PROC_MEM_TECH_MTTDIMBT_FILECODE (0XF504)
+#define PROC_MEM_TECH_MTTECC_FILECODE (0XF505)
+#define PROC_MEM_TECH_MTTHRC_FILECODE (0XF506)
+#define PROC_MEM_TECH_MTTML_FILECODE (0XF507)
+#define PROC_MEM_TECH_MTTOPTSRC_FILECODE (0XF509)
+#define PROC_MEM_TECH_MTTSRC_FILECODE (0XF50B)
+#define PROC_MEM_TECH_MTTEDGEDETECT_FILECODE (0XF50C)
+#define PROC_MEM_TECH_DDR3_MT3_FILECODE (0XF581)
+#define PROC_MEM_TECH_DDR3_MTOT3_FILECODE (0XF583)
+#define PROC_MEM_TECH_DDR3_MTRCI3_FILECODE (0XF584)
+#define PROC_MEM_TECH_DDR3_MTSDI3_FILECODE (0XF585)
+#define PROC_MEM_TECH_DDR3_MTSPD3_FILECODE (0XF586)
+#define PROC_MEM_TECH_DDR3_MTTWL3_FILECODE (0XF587)
+#define PROC_MEM_TECH_DDR3_MTTECC3_FILECODE (0XF588)
+#define PROC_MEM_TECH_DDR3_MTLRDIMM3_FILECODE (0XF589)
+#define PROC_MEM_TECH_MTTHRCSEEDTRAIN_FILECODE (0XF58A)
+#define PROC_MEM_TECH_MTTRDDQS2DTRAINING_FILECODE (0XF58B)
+#define PROC_MEM_TECH_MTTRDDQS2DEYERIMSEARCH_FILECODE (0XF58C)
+
+#endif // _FILECODE_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/GeneralServices.h b/src/vendorcode/amd/agesa/f16kb/Include/GeneralServices.h
new file mode 100644
index 0000000..d07db77
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/GeneralServices.h
@@ -0,0 +1,201 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * General Services
+ *
+ * Provides Services similar to the external General Services API, except
+ * suited to use within AGESA components. Socket, Core and PCI identification.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Common
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _GENERAL_SERVICES_H_
+#define _GENERAL_SERVICES_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define NUMBER_OF_EVENT_DATA_PARAMS 4
+
+/**
+ * AMD Device id for MMIO check.
+ */
+#define AMD_DEV_VEN_ID 0x1022
+#define AMD_DEV_VEN_ID_ADDRESS 0
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * An AGESA Event Log entry.
+ */
+typedef struct {
+ AGESA_STATUS EventClass; ///< The severity of the event, its associated AGESA_STATUS.
+ UINT32 EventInfo; ///< Uniquely identifies the event.
+ UINT32 DataParam1; ///< Event specific additional data
+ UINT32 DataParam2; ///< Event specific additional data
+ UINT32 DataParam3; ///< Event specific additional data
+ UINT32 DataParam4; ///< Event specific additional data
+} AGESA_EVENT;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Get a specified Core's APIC ID.
+ *
+ * @param[in] StdHeader Header for library and services.
+ * @param[in] Socket The Core's Socket.
+ * @param[in] Core The Core id.
+ * @param[out] ApicAddress The Core's APIC ID.
+ * @param[out] AgesaStatus Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ * @retval TRUE The core is present, APIC Id valid
+ * @retval FALSE The core is not present, APIC Id not valid.
+ */
+BOOLEAN
+GetApicId (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT32 Socket,
+ IN UINT32 Core,
+ OUT UINT8 *ApicAddress,
+ OUT AGESA_STATUS *AgesaStatus
+);
+
+/**
+ * Get Processor Module's PCI Config Space address.
+ *
+ * @param[in] StdHeader Header for library and services.
+ * @param[in] Socket The Core's Socket.
+ * @param[in] Module The Module in that Processor
+ * @param[out] PciAddress The Processor's PCI Config Space address (Function 0, Register 0)
+ * @param[out] AgesaStatus Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ * @retval TRUE The core is present, PCI Address valid
+ * @retval FALSE The core is not present, PCI Address not valid.
+ */
+BOOLEAN
+GetPciAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT32 Socket,
+ IN UINT32 Module,
+ OUT PCI_ADDR *PciAddress,
+ OUT AGESA_STATUS *AgesaStatus
+);
+
+/**
+ * "Who am I" for the current running core.
+ *
+ * @param[in] StdHeader Header for library and services.
+ * @param[out] Socket The current Core's Socket
+ * @param[out] Module The current Core's Processor Module
+ * @param[out] Core The current Core's core id.
+ * @param[out] AgesaStatus Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ */
+VOID
+IdentifyCore (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT UINT32 *Socket,
+ OUT UINT32 *Module,
+ OUT UINT32 *Core,
+ OUT AGESA_STATUS *AgesaStatus
+);
+
+/**
+ * A boolean function determine executed CPU is BSP core.
+ */
+BOOLEAN
+IsBsp (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ OUT AGESA_STATUS *AgesaStatus
+ );
+
+/**
+ * This function logs AGESA events into the event log.
+ */
+VOID
+PutEventLog (
+ IN AGESA_STATUS EventClass,
+ IN UINT32 EventInfo,
+ IN UINT32 DataParam1,
+ IN UINT32 DataParam2,
+ IN UINT32 DataParam3,
+ IN UINT32 DataParam4,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * This function gets event logs from the circular buffer.
+ */
+AGESA_STATUS
+GetEventLog (
+ OUT AGESA_EVENT *EventRecord,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * This function gets event logs from the circular buffer without flushing the entry.
+ */
+BOOLEAN
+PeekEventLog (
+ OUT AGESA_EVENT *EventRecord,
+ IN UINT16 Index,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This routine programs the registers necessary to get the PCI MMIO mechanism
+ * up and functioning.
+ */
+VOID
+InitializePciMmio (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _GENERAL_SERVICES_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/GnbInterface.h b/src/vendorcode/amd/agesa/f16kb/Include/GnbInterface.h
new file mode 100644
index 0000000..314383d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/GnbInterface.h
@@ -0,0 +1,123 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB API definition.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84514 $ @e \$Date: 2012-12-17 10:44:17 -0600 (Mon, 17 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBINTERFACE_H_
+#define _GNBINTERFACE_H_
+
+AGESA_STATUS
+GnbInitAtReset (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GnbInitAtEarly (
+ IN OUT AMD_EARLY_PARAMS *EarlyParamsPtr
+ );
+
+VOID
+GnbInitDataStructAtPostDef (
+ IN OUT GNB_POST_CONFIGURATION *GnbPostConfigPtr,
+ IN AMD_POST_PARAMS *PostParamsPtr
+ );
+
+AGESA_STATUS
+GnbInitAtPost (
+ IN OUT AMD_POST_PARAMS *PostParamsPtr
+ );
+
+VOID
+GnbInitDataStructAtEnvDef (
+ IN OUT GNB_ENV_CONFIGURATION *GnbEnvConfigPtr,
+ IN AMD_ENV_PARAMS *EnvParamsPtr
+ );
+
+VOID
+GnbInitDataStructAtMidDef (
+ IN OUT GNB_MID_CONFIGURATION *GnbMidConfigPtr,
+ IN AMD_MID_PARAMS *MidParamsPtr
+ );
+
+VOID
+GnbInitDataStructAtLateDef (
+ IN OUT GNB_LATE_CONFIGURATION *GnbLateConfigPtr,
+ IN AMD_LATE_PARAMS *LateParamsPtr
+ );
+
+AGESA_STATUS
+GnbInitAtEnv (
+ IN AMD_ENV_PARAMS *EnvParamsPtr
+ );
+
+AGESA_STATUS
+GnbInitAtMid (
+ IN OUT AMD_MID_PARAMS *MidParamsPtr
+ );
+
+AGESA_STATUS
+GnbInitAtLate (
+ IN OUT AMD_LATE_PARAMS *LateParamsPtr
+ );
+
+AGESA_STATUS
+GnbInitAtPostAfterDram (
+ IN OUT AMD_POST_PARAMS *PostParamsPtr
+ );
+
+AGESA_STATUS
+AmdGnbRecovery (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GnbInitAtEarlier (
+ IN OUT AMD_EARLY_PARAMS *EarlyParamsPtr
+ );
+
+AGESA_STATUS
+GnbInitAtS3Save (
+ IN OUT AMD_S3SAVE_PARAMS *AmdS3SaveParams
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/Ids.h b/src/vendorcode/amd/agesa/f16kb/Include/Ids.h
new file mode 100644
index 0000000..69bb6da
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/Ids.h
@@ -0,0 +1,1426 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD IDS Routines
+ *
+ * Contains AMD AGESA Integrated Debug Macros
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 87651 $ @e \$Date: 2013-02-06 13:31:52 -0600 (Wed, 06 Feb 2013) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+ /* Macros to aid debugging */
+ /* These definitions expand to zero (0) bytes of code when disabled */
+
+#ifndef _IDS_H_
+#define _IDS_H_
+
+#undef FALSE
+#undef TRUE
+#define FALSE 0
+#define TRUE 1
+// Proto type for optionsids.h
+typedef UINT32 IDS_STATUS; ///< Status of IDS function.
+#define IDS_SUCCESS ((IDS_STATUS) 0x00000000ul) ///< IDS Function is Successful.
+#define IDS_UNSUPPORTED ((IDS_STATUS) 0xFFFFFFFFul) ///< IDS Function is not existed.
+
+#define IDS_STRINGIZE(a) #a ///< for define stringize macro
+#ifndef IDS_DEADLOOP
+ #define IDS_DEADLOOP() { volatile UINTN __i; __i = 1; while (__i); }
+#endif
+/**
+ * IDS Option Hook Points
+ *
+ * These are the values to indicate hook point in AGESA for IDS Options.
+ *
+ */
+typedef enum { //vv- for debug reference only
+ IDS_INIT_EARLY_BEFORE, ///< 00 Option Hook Point before AGESA function AMD_INIT_EARLY.
+ ///< IDS Object is initialized.
+ ///< Override CPU Core Leveling Mode.
+ ///< Set P-State in Post
+ IDS_INIT_EARLY_AFTER, ///< 01 Option Hook Point after AGESA function AMD_INIT_EARLY.
+ IDS_INIT_LATE_BEFORE, ///< 02 Option Hook Point before AGESA function AMD_INIT_LATE.
+ ///< It will be used to control the following tables.
+ ///< ACPI P-State Table (_PSS, XPSS, _PCT, _PSD, _PPC)
+ ///< ACPI SRAT Table
+ ///< ACPI SLIT Table
+ ///< ACPI WHEA Table
+ ///< DMI Table
+ IDS_INIT_LATE_AFTER, ///< 03 Option Hook Point after AGESA function AMD_INIT_LATE.
+ IDS_INIT_MID_BEFORE, ///< 04 Option Hook Point before AGESA function AMD_INIT_MID.
+ IDS_INIT_MID_AFTER, ///< 05 Option Hook Point after AGESA function AMD_INIT_MID.
+ IDS_INIT_POST_BEFORE, ///< 06 Option Hook Point before AGESA function AMD_INIT_POST.
+ ///< Control Interleaving and DRAM memory hole
+ ///< Override the setting of ECC Control
+ ///< Override the setting of Online Spare Rank
+ IDS_INIT_POST_AFTER, ///< 07 Option Hook Point after AGESA function AMD_INIT_POST.
+ IDS_INIT_RESET_BEFORE, ///< 08 Option Hook Point before AGESA function AMD_INIT_RESET.
+ IDS_INIT_RESET_AFTER, ///< 09 Option Hook Point after AGESA function AMD_INIT_RESET.
+ IDS_INIT_POST_MID, ///< 0a Option Hook Point after AGESA function AMD_INIT_POST.
+ IDS_BEFORE_S3_SAVE, ///< 0b override any settings before S3 save.
+ IDS_BEFORE_S3_RESTORE, ///< 0c override any settings before S3 restore
+ IDS_AFTER_S3_SAVE, ///< 0d Override any settings after S3 save
+ IDS_AFTER_S3_RESTORE, ///< 0e Override any settings after S3 restore
+ IDS_BEFORE_DQS_TRAINING, ///< 0f override any settings before DQS training
+ IDS_BEFORE_DRAM_INIT, ///< 10 override any settings before Dram initialization
+ IDS_BEFORE_MEM_FREQ_CHG, ///< 11 override settings before MemClk frequency change
+ IDS_BEFORE_WARM_RESET , ///< 12 Override PCI or MSR Registers Before Warm Reset
+ IDS_BEFORE_PCI_INIT, ///< 13 Override PCI or MSR Registers Before PCI Init
+ IDS_BEFORE_AP_EARLY_HALT, ///< 14 Option Hook Point before AP early halt
+ IDS_BEFORE_S3_RESUME, ///< 15 Option Hook Point before s3 resume
+ IDS_AFTER_S3_RESUME, ///< 16 Option Hook Point after s3 resume
+ IDS_BEFORE_PM_INIT, ///< 17 Option Hook Point Before Pm Init
+
+ IDS_MT_BASE = 0x20, ///< 0x20 ~ 0x38 24 time points reserved for MTTime
+
+ IDS_PLATFORM_RSVD1 = 0x38, ///< from 0x38 to 0x3f will reserved for platform used
+ IDS_PLATFORM_RSVD2 = 0x39, ///< from 0x38 to 0x3f will reserved for platform used
+ IDS_PLATFORM_RSVD3 = 0x3a, ///< from 0x38 to 0x3f will reserved for platform used
+ IDS_PLATFORM_RSVD4 = 0x3b, ///< from 0x38 to 0x3f will reserved for platform used
+ IDS_PLATFORM_RSVD5 = 0x3c, ///< from 0x38 to 0x3f will reserved for platform used
+ IDS_PLATFORM_RSVD6 = 0x3d, ///< from 0x38 to 0x3f will reserved for platform used
+ IDS_PLATFORM_RSVD7 = 0x3e, ///< from 0x38 to 0x3f will reserved for platform used
+ IDS_PLATFORM_RSVD8 = 0x3f, ///< from 0x38 to 0x3f will reserved for platform used
+
+ IDS_HT_CONTROL, ///< 40 Override the setting of HT Link Control
+ IDS_HT_TRISTATE, ///< 41 Enable or Disable HT Tri-state during an LDTSTP#
+ IDS_INIT_DRAM_TABLE, ///< 42 Generate override table for Dram Timing
+ ///< Dram Controller, Drive Strength and DQS Timing
+ IDS_GET_DRAM_TABLE, ///< 43 Generate override table for Dram Timing
+ IDS_GANGING_MODE, ///< 44 override Memory Mode Unganged
+ IDS_POWERDOWN_MODE, ///< 45 override Power Down Mode
+ IDS_BURST_LENGTH32, ///< 46 override Burst Length32
+ IDS_ALL_MEMORY_CLOCK, ///< 47 override All Memory Clks Enable
+ IDS_ECC, ///< 48 override ECC parameter
+ IDS_ECCSYMBOLSIZE, ///< 49 override ECC symbol size
+ IDS_CPU_Early_Override, ///< 4a override CPU early parameter
+ IDS_CACHE_FLUSH_HLT, ///< 4b override Cache Flush Hlt
+ IDS_CHANNEL_INTERLEAVE, ///< 4c override Channel Interleave
+ IDS_MEM_ERROR_RECOVERY, ///< 4d override memory error recovery
+ IDS_MEM_RETRAIN_TIMES, ///< 4e override memory retrain times
+ IDS_MEM_SIZE_OVERLAY, ///< 4f Override the syslimit
+ IDS_HT_ASSIST, ///< 50 Override Probe Filter
+ IDS_CHECK_NEGATIVE_WL, ///< 51 Check for negative write leveling result
+ IDS_DLL_SHUT_DOWN, ///< 52 Check for Dll Shut Down
+ IDS_POR_MEM_FREQ, ///< 53 Entry to enable/disable MemClk frequency enforcement
+ IDS_PHY_DLL_STANDBY_CTRL, ///< 54 Enable/Disable Phy DLL standby feature
+ IDS_PLATFORMCFG_OVERRIDE, ///< 55 Hook for Override PlatformConfig structure
+ IDS_LOADCARD_ERROR_RECOVERY, ///< 56 Special error handling for load card support
+ IDS_MEM_IGNORE_ERROR, ///< 57 Ignore error and do not do fatal exit in memory
+ IDS_GNB_SMU_SERVICE_CONFIG, ///< 58 Config GNB SMU service
+ IDS_GNB_ORBDYNAMIC_WAKE, ///< 59 config GNB dynamic wake
+ IDS_GNB_PLATFORMCFG_OVERRIDE, ///< 5a override ids gnb platform config
+ IDS_GNB_LCLK_DPM_EN, ///< 5b override GNB LCLK DPM configuration
+ IDS_GNB_LCLK_DEEP_SLEEP, ///< 5c override GNB LCLK DPM deep sleep
+ IDS_GNB_CLOCK_GATING, ///< 5d Override GNB Clock gating config
+ IDS_NB_PSTATE_DIDVID, ///< 5e Override NB P-state settings
+ IDS_CPB_CTRL, ///< 5f Config the Core peformance boost feature
+ IDS_HTC_CTRL, ///< 60 Hook for Hardware Thermal Control
+ IDS_RESERVED_1, ///< 61
+ IDS_MEM_MR0, ///< 62 Hook for override Memory Mr0 register
+ IDS_TRAP_TABLE, ///< 63 Hook for add IDS register table to the loop
+ IDS_NBBUFFERALLOCATIONATEARLY, ///< 64 Hook for override North bridge bufer allocation
+ IDS_BEFORE_S3_SPECIAL, ///< 65 Hook to bypass S3 special functions
+ IDS_SET_PCI_REGISTER_ENTRY, ///< 66 Hook to SetRegisterForPciEntry
+ IDS_RESERVED_2, ///< 67
+ IDS_BEFORE_MEMCLR, ///< 68 Hook before set Memclr bit
+ IDS_OVERRIDE_IO_CSTATE, ///< 69 Hook for override io C-state setting
+ IDS_NBPSDIS_OVERRIDE, ///< 6a Hook for override NB pstate disable setting
+ IDS_NBPS_REG_OVERRIDE, ///< 6b Hook for override Memory NBps reg
+ IDS_LOW_POWER_PSTATE, ///< 6c Hook for disable Low power_Pstates feature
+ IDS_CST_CREATE, ///< 6d Hook for create _CST
+ IDS_CST_SIZE, ///< 6e Hook for get _CST size
+ IDS_ENFORCE_VDDIO, ///< 6f Hook to override VDDIO
+ IDS_STRETCH_FREQUENCY_LIMIT, ///< 70 Hook for enforcing memory stretch frequency limit
+ IDS_INIT_MEM_REG_TABLE, ///< 71 Hook for init memory register table
+ IDS_STUB1, ///< 72 Hook to skip fused max rate cap
+ IDS_FCH_INIT_AT_RESET, ///< 73 Hook for FCH reset parameter
+ IDS_FCH_INIT_AT_ENV, ///< 74 Hook for FCH ENV parameter
+ IDS_ENFORCE_PLAT_TABLES, ///< 75 Hook to enforce platform specific tables
+ IDS_NBPS_MIN_FREQ, ///< 76 Hook for override MIN nb ps freq
+ IDS_GNB_FORCE_CABLESAFE, ///< 77 Hook for override Force Cable Safe
+ IDS_SKIP_PM_TRANSITION_STEP, ///< 78 Hook for provide IDS ability to skip this PM step
+ IDS_GNB_PROPERTY, ///< 79 Hook for GNB Property
+ IDS_GNB_PCIE_POWER_GATING, ///< 7A Hook for GNB PCIe Power Gating
+ IDS_MEM_DYN_DRAM_TERM, ///< 7B Hook for Override Dynamic Dram Term
+ IDS_MEM_DRAM_TERM, ///< 7C Hook for Override Dram Term
+ IDS_HT_TRACE_MODE, ///< 7D Trace Mode
+ IDS_GNB_ALTVDDNB, ///< 7E Hook for Override AltVddNB
+ IDS_UCODE, ///< 7F Enable or Disable microcode patching
+ dummy210,
+ IDS_MEMORY_POWER_POLICY, ///< 81 Memory power policy
+ IDS_GET_STRETCH_FREQUENCY_LIMIT, ///< 82 Hook for enforcing memory stretch frequency limit
+ IDS_CPU_FEAT, ///< 83 Hook for runtime force cpu feature disable
+ IDS_AFTER_DCT_PHY_ACCESS, ///< 84 Hook for DctAccessDone check
+ IDS_FORCE_PHY_TO_M0, ///< 85 Hook to bypass M0 enforcement
+ IDS_GNB_PMM_SWTJOFFSET, ///< 86 Hook to GNBSWTJOFFSET
+ IDS_LOCK_DRAM_CFG, ///< 87 Hook to BFLockDramCfg
+ IDS_BEFORE_GEN2_INIT, ///< 88 Hook to Before Gen2 Init
+ IDS_BEFORE_GPP_TRAINING, ///< 89 Hook to Before Gpp training
+ IDS_BEFORE_RECONFIGURATION, ///< 8A Hook to Before Reconfiguration
+ IDS_BEFORE_GEN3_INIT, ///< 8B Hook to Before Gen3 Init
+ IDS_BEFORE_POWER_GATING, ///< 8C Hook to Before Power Gating
+ IDS_AFTER_EARLY_INIT_ONCORE, ///< 8D Hook to after EarlyInit On Core
+ IDS_GNB_PCIE_PORT_REMAP, ///< 8E Hook to change mapping of PCIe devices
+ IDS_ECC_CONTROL, ///< 8F Enable/Disable ECC feature
+ IDS_GNB_PCIE_PHY_ISOLATION, ///< 90 Enable/Disable PCIE PHY ISOLATION
+ IDS_AFTER_RESTORING_PCI_REG, ///< 91 Hook after restoring PCI register during S3 resume
+ IDS_MSR_ACCESS_OVERRIDE, ///< 92 Hook to disable MSR access
+ IDS_REPORT_SMU_FW_VERSION, ///< 93 Hook to report SMU firmware version
+ IDS_GNB_LOAD_SAMU_PATCH, ///< 94 Hook to Load SAMU patch
+ IDS_DLLSTAGGERDLY_OVERRIDE, ///< 95 Hook to skip Dll Stagger Delay
+ IDS_CSAMPLE_TIMER, ///< 96 Hook to override CSampleTimer
+ IDS_GNB_PMM_NATIVEGEN1PLL, ///< 97 Enable/Disable Native Gen1 PLL
+ IDS_BEFORE_PLAT_TABLES, ///< 98 Hook before processing platform specific tables
+ IDS_GNB_PCIE_MASTERPLL_SELECTION, ///< 99 Hook to override PCIe Master PLL selection
+ IDS_OPTION_END, ///< 100 End of IDS option
+} AGESA_IDS_OPTION;
+
+#include "OptionsIds.h"
+#include "Filecode.h"
+#include "IdsPerf.h"
+
+/* Initialize IDS controls */
+#ifndef IDSOPT_IDS_ENABLED
+ #define IDSOPT_IDS_ENABLED FALSE
+#endif
+
+#ifndef IDSOPT_CONTROL_ENABLED
+ #define IDSOPT_CONTROL_ENABLED FALSE
+#endif
+
+#ifndef IDSOPT_CONTROL_NV_TO_CMOS
+ #define IDSOPT_CONTROL_NV_TO_CMOS FALSE
+#endif
+
+#ifndef IDSOPT_TRACING_ENABLED
+ #define IDSOPT_TRACING_ENABLED FALSE
+#endif
+
+#ifndef IDSOPT_TRACE_USER_OPTIONS
+ #define IDSOPT_TRACE_USER_OPTIONS TRUE
+#endif
+
+#ifndef IDSOPT_PERF_ANALYSIS
+ #define IDSOPT_PERF_ANALYSIS FALSE
+#endif
+
+#ifndef IDSOPT_HEAP_CHECKING
+ #define IDSOPT_HEAP_CHECKING FALSE
+#endif
+
+#ifndef IDSOPT_ASSERT_ENABLED
+ #define IDSOPT_ASSERT_ENABLED FALSE
+#endif
+
+#ifndef IDSOPT_ERROR_TRAP_ENABLED
+ #define IDSOPT_ERROR_TRAP_ENABLED FALSE
+#endif
+
+#ifndef IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE
+#endif
+
+#ifndef IDSOPT_DEBUG_CODE_ENABLED
+ #define IDSOPT_DEBUG_CODE_ENABLED FALSE
+#endif
+
+#ifndef IDSOPT_IDT_EXCEPTION_TRAP
+ #define IDSOPT_IDT_EXCEPTION_TRAP FALSE
+#endif
+
+#ifndef IDSOPT_C_OPTIMIZATION_DISABLED
+ #define IDSOPT_C_OPTIMIZATION_DISABLED FALSE
+#endif
+
+#ifndef IDSOPT_TRACING_CONSOLE_HDTOUT
+ #define IDSOPT_TRACING_CONSOLE_HDTOUT TRUE
+#endif
+
+#ifndef IDSOPT_TRACING_CONSOLE_SERIALPORT
+ #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE
+#endif
+
+#ifndef IDSOPT_TRACING_CONSOLE_REDIRECT_IO
+ #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE
+#endif
+
+#ifndef IDSOPT_TRACING_CONSOLE_RAM
+ #define IDSOPT_TRACING_CONSOLE_RAM FALSE
+#endif
+
+#if IDSOPT_IDS_ENABLED == FALSE
+ #undef IDSOPT_CONTROL_ENABLED
+ #undef IDSOPT_TRACING_ENABLED
+ #undef IDSOPT_PERF_ANALYSIS
+ #undef IDSOPT_HEAP_CHECKING
+ #undef IDSOPT_ASSERT_ENABLED
+ #undef IDSOPT_ERROR_TRAP_ENABLED
+ #undef IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ #undef IDSOPT_DEBUG_CODE_ENABLED
+ #undef IDSOPT_TRACE_USER_OPTIONS
+ #undef IDSOPT_TRACING_CONSOLE_HDTOUT
+ #undef IDSOPT_TRACING_CONSOLE_SERIALPORT
+ #undef IDSOPT_TRACING_CONSOLE_REDIRECT_IO
+ #undef IDSOPT_TRACING_CONSOLE_RAM
+
+ #define IDSOPT_CONTROL_ENABLED FALSE
+ #define IDSOPT_TRACING_ENABLED FALSE
+ #define IDSOPT_PERF_ANALYSIS FALSE
+ #define IDSOPT_HEAP_CHECKING FALSE
+ #define IDSOPT_ASSERT_ENABLED FALSE
+ #define IDSOPT_ERROR_TRAP_ENABLED FALSE
+ #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE
+ #define IDSOPT_DEBUG_CODE_ENABLED FALSE
+ #define IDSOPT_TRACE_USER_OPTIONS FALSE
+ #define IDSOPT_TRACING_CONSOLE_HDTOUT FALSE
+ #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE
+ #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE
+ #define IDSOPT_TRACING_CONSOLE_RAM FALSE
+#endif
+
+//Disable when master token Tracing is set to FALSE
+#if (IDSOPT_TRACING_ENABLED == FALSE) || (defined (IDSOPT_CUSTOMIZE_TRACING_SERVICE))
+ #undef IDSOPT_TRACING_CONSOLE_HDTOUT
+ #define IDSOPT_TRACING_CONSOLE_HDTOUT FALSE
+
+ #undef IDSOPT_TRACING_CONSOLE_SERIALPORT
+ #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE
+
+ #undef IDSOPT_TRACING_CONSOLE_REDIRECT_IO
+ #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE
+
+ #undef IDSOPT_TRACING_CONSOLE_RAM
+ #define IDSOPT_TRACING_CONSOLE_RAM FALSE
+#endif
+
+//Disable Tracing if all support HW layer set to FALSE
+#if ((IDSOPT_TRACING_CONSOLE_HDTOUT == FALSE) && (IDSOPT_TRACING_CONSOLE_SERIALPORT == FALSE) && (IDSOPT_TRACING_CONSOLE_REDIRECT_IO == FALSE) && (IDSOPT_TRACING_CONSOLE_RAM == FALSE))
+ #ifndef IDSOPT_CUSTOMIZE_TRACING_SERVICE
+ #undef IDSOPT_TRACING_ENABLED
+ #define IDSOPT_TRACING_ENABLED FALSE
+ #endif
+#endif
+/**
+ * Make a Progress Report to the User.
+ *
+ * This Macro is always enabled. The default action is to write the TestPoint value
+ * to an I/O port. The I/O port is 8 bits in size and the default address is 0x80.
+ * IBVs can change AGESA's default port by defining IDS_DEBUG_PORT to desired port
+ * in OptionsIds.h in their build tip.
+ *
+ * @param[in] TestPoint The value for display indicating progress
+ * @param[in,out] StdHeader Pointer of AMD_CONFIG_PARAMS
+ *
+ **/
+
+#define AGESA_TESTPOINT(TestPoint, StdHeader) IdsAgesaTestPoint ((TestPoint), (StdHeader))
+
+#ifndef IDS_DEBUG_PORT
+ #define IDS_DEBUG_PORT 0x80
+#endif
+
+/**
+ * @def STOP_HERE
+ * (macro) - Causes program to halt. This is @b only for use during active debugging .
+ *
+ * Causes the program to halt and display the file number of the source of the
+ * halt (displayed in decimal).
+ *
+ **/
+#if IDSOPT_IDS_ENABLED == TRUE
+ #ifdef STOP_CODE
+ #undef STOP_CODE
+ #endif
+ #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \
+ ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \
+ (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000))
+ #define STOP_HERE IdsErrorStop (STOP_CODE);
+#else
+ #define STOP_HERE STOP_HERE_Needs_To_Be_Removed //"WARNING: Debug code needs to be removed for production builds."
+#endif
+
+/**
+ * @def ASSERT
+ * Test an assertion that the given statement is True.
+ *
+ * The statement is evaluated to a boolean value. If the statement is True,
+ * then no action is taken (no error). If the statement is False, a error stop
+ * is generated to halt the program. Used for testing for fatal errors that
+ * must be resolved before production. This is used to do parameter checks,
+ * bounds checking, range checks and 'sanity' checks.
+ *
+ * @param[in] conditional Assert that evaluating this conditional results in TRUE.
+ *
+ **/
+#ifndef ASSERT
+ #if IDSOPT_ASSERT_ENABLED == TRUE
+ #ifdef STOP_CODE
+ #undef STOP_CODE
+ #endif
+ #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \
+ ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \
+ (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000))
+
+ #define ASSERT(conditional) ((conditional) ? 0 : IdsAssert (STOP_CODE));
+ #else
+ #define ASSERT(conditional)
+ #endif
+#endif
+
+#if IDSOPT_CAR_CORRUPTION_CHECK_ENABLED == TRUE
+ #undef IDSOPT_ERROR_TRAP_ENABLED
+ #define IDSOPT_ERROR_TRAP_ENABLED TRUE
+ #define IDS_CAR_CORRUPTION_CHECK(StdHeader) IdsCarCorruptionCheck(StdHeader)
+#else
+ #define IDS_CAR_CORRUPTION_CHECK(StdHeader)
+#endif
+/**
+ * @def DEBUG_CODE
+ * Make the code active when IDSOPT_DEBUG_CODE_ENABLED enable
+ *
+ */
+#ifndef DEBUG_CODE
+ #if IDSOPT_DEBUG_CODE_ENABLED == TRUE
+ #define DEBUG_CODE(Code) Code
+ #else
+ #define DEBUG_CODE(Code)
+ #endif
+#endif
+
+/**
+ * @def IDS_ERROR_TRAP
+ * Trap AGESA Error events with stop code display.
+ *
+ * Works similarly to use of "ASSERT (FALSE);"
+ *
+ */
+#if IDSOPT_ERROR_TRAP_ENABLED == TRUE
+ #ifdef STOP_CODE
+ #undef STOP_CODE
+ #endif
+ #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \
+ ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \
+ (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000))
+
+ #define IDS_ERROR_TRAP IdsErrorStop (STOP_CODE)
+#else
+ #define IDS_ERROR_TRAP
+#endif
+
+///give the extended Macro default value
+#ifndef __IDS_EXTENDED__
+ #define IDS_EXTENDED_HOOK(idsoption, dataptr, idsnvptr, stdheader) IDS_SUCCESS
+ #define IDS_TRACE_DEFAULT (0)
+ #define IDS_INITIAL_F16_KB_PM_STEP
+ #define IDS_F16_KB_PM_CUSTOM_STEP
+ #define IDS_EXTENDED_GET_DATA_EARLY(data, StdHeader)
+ #define IDS_EXTENDED_GET_DATA_LATE(data, StdHeader)
+ #define IDS_EXTENDED_HEAP_SIZE 0
+ #define IDS_EXT_INCLUDE_F15(file)
+ #define IDS_EXT_INCLUDE(file)
+ #define IDS_PAD_4K
+ #define IDS_EXTENDED_CODE(code)
+ #define SMU_FIRMWARE_PADS_1K
+#endif
+
+#ifndef IDS_NUM_NV_ITEM
+ #define IDS_NUM_NV_ITEM (IDS_NUM_EXT_NV_ITEM)
+#endif
+
+#define IDS_CMOS_INDEX_PORT 0x70
+#define IDS_CMOS_DATA_PORT 0x71
+#define IDS_CMOS_REGION_START 0x20
+#define IDS_CMOS_REGION_END 0x7F
+#define IDS_AP_GET_NV_FROM_CMOS(x) FALSE
+
+#if IDSOPT_CONTROL_ENABLED == TRUE
+ #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader) \
+ AmdIdsCtrlDispatcher ((IdsOption), (DataPtr), (StdHeader))
+
+ #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) \
+ IdsOptionCallout ((CallOutId), (DataPtr), (StdHeader))
+ #if IDSOPT_CONTROL_NV_TO_CMOS == TRUE
+ #undef IDS_AP_GET_NV_FROM_CMOS
+ #define IDS_AP_GET_NV_FROM_CMOS(x) AmdIdsApGetNvFromCmos(x)
+ #ifdef IDS_OPT_CMOS_INDEX_PORT
+ #undef IDS_CMOS_INDEX_PORT
+ #define IDS_CMOS_INDEX_PORT IDS_OPT_CMOS_INDEX_PORT
+ #endif
+
+ #ifdef IDS_OPT_CMOS_DATA_PORT
+ #undef IDS_CMOS_DATA_PORT
+ #define IDS_CMOS_DATA_PORT IDS_OPT_CMOS_DATA_PORT
+ #endif
+
+ #ifdef IDS_OPT_CMOS_REGION_START
+ #undef IDS_CMOS_REGION_START
+ #define IDS_CMOS_REGION_START IDS_OPT_CMOS_REGION_START
+ #endif
+
+ #ifdef IDS_OPT_CMOS_REGION_END
+ #undef IDS_CMOS_REGION_END
+ #define IDS_CMOS_REGION_END IDS_OPT_CMOS_REGION_END
+ #endif
+ #endif
+#else
+ #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader)
+
+ #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) //AGESA_SUCCESS
+#endif
+
+/**
+ * Macro to add a *skip* hook for IDS options
+ *
+ * The default minimal action is to do nothing and there is no any code to increase.
+ * For debug environments, IDS dispatcher function will be called to perform
+ * the detailed action and to skip AGESA code if necessary.
+ *
+ * @param[in] IdsOption IDS Option ID for this hook point
+ * @param[in, out] DataPtr Data Pointer to override
+ * @param[in, out] StdHeader Pointer of AMD_CONFIG_PARAMS
+ *
+ *
+ **/
+
+#if IDSOPT_CONTROL_ENABLED == TRUE
+ #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader) \
+ if (AmdIdsCtrlDispatcher (IdsOption, DataPtr, StdHeader) == IDS_SUCCESS)
+#else
+ #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader)
+#endif
+
+/**
+ * Macro to add a heap manager routine
+ *
+ * when memory is allocated the heap manager actually allocates two extra dwords of data,
+ * one dword buffer before the actual memory, and one dword afterwards.
+ * a complete heap walk and check to be performed at any time.
+ * it would ASSERT if the heap is corrupt
+ *
+ * @param[in] StdHeader Pointer of AMD_CONFIG_PARAMS
+ *
+ *
+ **/
+
+// Heap debug feature
+#define SENTINEL_BEFORE_VALUE 0x64616548ul // "Head"
+#define SENTINEL_AFTER_VALUE 0x6C696154ul // "Tail"
+#if IDSOPT_IDS_ENABLED == TRUE
+ #if IDSOPT_HEAP_CHECKING == TRUE
+ #define SIZE_OF_SENTINEL 4
+ #define NUM_OF_SENTINEL 2 // Before ("Head") and After ("Tail")
+ #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + AlignTo16Byte) = SENTINEL_BEFORE_VALUE);
+ #define SET_SENTINEL_AFTER(NodePtr) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + NodePtr->BufferSize - SIZE_OF_SENTINEL) = SENTINEL_AFTER_VALUE);
+ #define Heap_Check(stdheader) AmdHeapIntactCheck(stdheader)
+ #else
+ #define SIZE_OF_SENTINEL 0
+ #define NUM_OF_SENTINEL 0
+ #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte)
+ #define SET_SENTINEL_AFTER(NodePtr)
+ #define Heap_Check(stdheader)
+ #endif
+#else
+ #define SIZE_OF_SENTINEL 0
+ #define NUM_OF_SENTINEL 0
+ #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte)
+ #define SET_SENTINEL_AFTER(NodePtr)
+ #define Heap_Check(stdheader)
+#endif
+
+/**
+ * Macro to add IDT for debugging exception.
+ *
+ * A debug feature. Adding a 'jmp $' into every exception handler.
+ * So debugger could use HDT to skip 'jmp $' and execute the iret,
+ * then they could find which instruction cause the exception.
+ *
+ * @param[in] FunctionId IDS Function ID for this hook point
+ * @param[in, out] DataPtr Data Pointer to override
+ * @param[in, out] StdHeader Pointer of AMD_CONFIG_PARAMS
+ *
+ *
+ **/
+#if IDSOPT_IDS_ENABLED == TRUE
+ #if IDSOPT_IDT_EXCEPTION_TRAP == TRUE
+ #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) IdsExceptionTrap (FunctionId, DataPtr, StdHeader)
+ #else
+ #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader)
+ #endif
+#else
+ #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader)
+#endif
+
+
+ //Note a is from 0 to 63
+#define DEBUG_PRINT_SHIFT(a) ((UINT64)1 << a)
+//Memory Masks
+#define MEM_SETREG DEBUG_PRINT_SHIFT (0)
+#define MEM_GETREG DEBUG_PRINT_SHIFT (1)
+#define MEM_FLOW DEBUG_PRINT_SHIFT (2)
+#define MEM_STATUS DEBUG_PRINT_SHIFT (3)
+#define MEM_UNDEF_BF DEBUG_PRINT_SHIFT (4)
+#define MEMORY_TRACE_RSV2 DEBUG_PRINT_SHIFT (5)
+#define MEMORY_TRACE_RSV3 DEBUG_PRINT_SHIFT (6)
+#define MEMORY_TRACE_RSV4 DEBUG_PRINT_SHIFT (7)
+#define MEMORY_TRACE_RSV5 DEBUG_PRINT_SHIFT (8)
+#define MEMORY_TRACE_RSV6 DEBUG_PRINT_SHIFT (9)
+
+//CPU Masks
+#define CPU_TRACE DEBUG_PRINT_SHIFT (10)
+#define CPU_TRACE_RSV1 DEBUG_PRINT_SHIFT (11)
+#define CPU_TRACE_RSV2 DEBUG_PRINT_SHIFT (12)
+#define CPU_TRACE_RSV3 DEBUG_PRINT_SHIFT (13)
+#define CPU_TRACE_RSV4 DEBUG_PRINT_SHIFT (14)
+#define CPU_TRACE_RSV5 DEBUG_PRINT_SHIFT (15)
+#define CPU_TRACE_RSV6 DEBUG_PRINT_SHIFT (16)
+#define CPU_TRACE_RSV7 DEBUG_PRINT_SHIFT (17)
+#define CPU_TRACE_RSV8 DEBUG_PRINT_SHIFT (18)
+#define CPU_TRACE_RSV9 DEBUG_PRINT_SHIFT (19)
+
+//GNB Masks
+#define GNB_TRACE DEBUG_PRINT_SHIFT (20)
+#define PCIE_MISC DEBUG_PRINT_SHIFT (21)
+#define PCIE_PORTREG_TRACE DEBUG_PRINT_SHIFT (22)
+#define PCIE_HOSTREG_TRACE DEBUG_PRINT_SHIFT (23)
+#define GNB_TRACE_RSV2 DEBUG_PRINT_SHIFT (24)
+#define NB_MISC DEBUG_PRINT_SHIFT (25)
+#define GNB_TRACE_RSV3 DEBUG_PRINT_SHIFT (26)
+#define GFX_MISC DEBUG_PRINT_SHIFT (27)
+#define NB_SMUREG_TRACE DEBUG_PRINT_SHIFT (28)
+#define GNB_TRACE_RSV1 DEBUG_PRINT_SHIFT (29)
+
+//HT Masks
+#define HT_TRACE DEBUG_PRINT_SHIFT (30)
+#define HT_TRACE_RSV1 DEBUG_PRINT_SHIFT (31)
+#define HT_TRACE_RSV2 DEBUG_PRINT_SHIFT (32)
+#define HT_TRACE_RSV3 DEBUG_PRINT_SHIFT (33)
+#define HT_TRACE_RSV4 DEBUG_PRINT_SHIFT (34)
+#define HT_TRACE_RSV5 DEBUG_PRINT_SHIFT (35)
+#define HT_TRACE_RSV6 DEBUG_PRINT_SHIFT (36)
+#define HT_TRACE_RSV7 DEBUG_PRINT_SHIFT (37)
+#define HT_TRACE_RSV8 DEBUG_PRINT_SHIFT (38)
+#define HT_TRACE_RSV9 DEBUG_PRINT_SHIFT (39)
+
+//FCH Masks
+#define FCH_TRACE DEBUG_PRINT_SHIFT (40)
+#define FCH_TRACE_RSV1 DEBUG_PRINT_SHIFT (41)
+#define FCH_TRACE_RSV2 DEBUG_PRINT_SHIFT (42)
+#define FCH_TRACE_RSV3 DEBUG_PRINT_SHIFT (43)
+#define FCH_TRACE_RSV4 DEBUG_PRINT_SHIFT (44)
+#define FCH_TRACE_RSV5 DEBUG_PRINT_SHIFT (45)
+#define FCH_TRACE_RSV6 DEBUG_PRINT_SHIFT (46)
+#define FCH_TRACE_RSV7 DEBUG_PRINT_SHIFT (47)
+#define FCH_TRACE_RSV8 DEBUG_PRINT_SHIFT (48)
+#define FCH_TRACE_RSV9 DEBUG_PRINT_SHIFT (49)
+
+//Other Masks
+#define MAIN_FLOW DEBUG_PRINT_SHIFT (50)
+#define EVENT_LOG DEBUG_PRINT_SHIFT (51)
+#define PERFORMANCE_ANALYSE DEBUG_PRINT_SHIFT (52)
+
+//Ids Masks
+#define IDS_TRACE DEBUG_PRINT_SHIFT (53)
+#define IDS_TRACE_RSV2 DEBUG_PRINT_SHIFT (55)
+#define IDS_TRACE_RSV3 DEBUG_PRINT_SHIFT (56)
+
+//S3
+#define S3_TRACE DEBUG_PRINT_SHIFT (57)
+
+//Library function to read/write PCI/MSR registers
+#define LIB_PCI_RD DEBUG_PRINT_SHIFT (58)
+#define LIB_PCI_WR DEBUG_PRINT_SHIFT (59)
+
+//AGESA test points
+#define TEST_POINT DEBUG_PRINT_SHIFT (60)
+
+//Reserved for platform log
+#define PLAT_RSV1 DEBUG_PRINT_SHIFT (61)
+#define PLAT_RSV2 DEBUG_PRINT_SHIFT (62)
+#define PLAT_RSV3 DEBUG_PRINT_SHIFT (63)
+
+#define GNB_TRACE_DEFAULT\
+ (\
+ GNB_TRACE | PCIE_MISC | NB_MISC | GFX_MISC \
+ )
+
+#define GNB_TRACE_REG\
+ (\
+ PCIE_PORTREG_TRACE | PCIE_HOSTREG_TRACE | \
+ NB_SMUREG_TRACE | GNB_TRACE_RSV1 \
+ )
+
+#define GNB_TRACE_ALL\
+ (\
+ GNB_TRACE_DEFAULT | GNB_TRACE_REG \
+ )
+
+#define CPU_TRACE_ALL\
+ (\
+ CPU_TRACE | CPU_TRACE_RSV1 | CPU_TRACE_RSV2 | CPU_TRACE_RSV3 | \
+ CPU_TRACE_RSV4 | CPU_TRACE_RSV5 | CPU_TRACE_RSV6 | CPU_TRACE_RSV7 | \
+ CPU_TRACE_RSV8 | CPU_TRACE_RSV9\
+ )
+
+#define MEMORY_TRACE_ALL\
+ (\
+ MEM_FLOW | MEM_GETREG | MEM_SETREG | MEM_STATUS | \
+ MEMORY_TRACE_RSV1 | MEMORY_TRACE_RSV2 | MEMORY_TRACE_RSV3 | MEMORY_TRACE_RSV4 | \
+ MEMORY_TRACE_RSV5 | MEMORY_TRACE_RSV6\
+ )
+
+#define HT_TRACE_ALL\
+ (\
+ HT_TRACE | HT_TRACE_RSV1 | HT_TRACE_RSV2 | HT_TRACE_RSV3 | \
+ HT_TRACE_RSV4 | HT_TRACE_RSV5 | HT_TRACE_RSV6 | HT_TRACE_RSV7 | \
+ HT_TRACE_RSV8 | HT_TRACE_RSV9\
+ )
+
+#define FCH_TRACE_ALL\
+ (\
+ FCH_TRACE | FCH_TRACE_RSV1 | FCH_TRACE_RSV2 | FCH_TRACE_RSV3 | \
+ FCH_TRACE_RSV4 | FCH_TRACE_RSV5 | FCH_TRACE_RSV6 | FCH_TRACE_RSV7 | \
+ FCH_TRACE_RSV8 | FCH_TRACE_RSV9\
+ )
+
+#define IDS_TRACE_ALL\
+ (\
+ IDS_TRACE | IDS_TRACE_RSV2 | IDS_TRACE_RSV3\
+ )
+
+#define OTHER_TRACE_ALL\
+ (\
+ MAIN_FLOW | EVENT_LOG | PERFORMANCE_ANALYSE\
+ )
+
+
+#define TRACE_MASK_ALL (0xFFFFFFFFFFFFFFFFull)
+#ifndef IDS_DEBUG_PRINT_MASK
+ #define IDS_DEBUG_PRINT_MASK (GNB_TRACE_DEFAULT | CPU_TRACE_ALL | MEM_FLOW | MEM_STATUS | HT_TRACE_ALL | FCH_TRACE_ALL | MAIN_FLOW | IDS_TRACE_DEFAULT | TEST_POINT)
+#endif
+
+/// if no specific define INIT & EXIT will be NULL
+#define IDS_HDT_CONSOLE_INIT(x)
+#define IDS_HDT_CONSOLE_EXIT(x)
+
+/// AGESA tracing service
+#if IDSOPT_TRACING_ENABLED == TRUE
+ #ifdef VA_ARGS_SUPPORTED
+ #if IDSOPT_C_OPTIMIZATION_DISABLED == TRUE
+ #define IDS_HDT_CONSOLE(f, s, ...) AmdIdsDebugPrint (f, s, __VA_ARGS__)
+ #else
+ #pragma warning(disable: 4127)
+ #define IDS_HDT_CONSOLE(f, s, ...) if (f == MEM_FLOW) AmdIdsDebugPrintMem (s, __VA_ARGS__); \
+ else if (f == CPU_TRACE) AmdIdsDebugPrintCpu (s, __VA_ARGS__); \
+ else if (f == HT_TRACE) AmdIdsDebugPrintHt (s, __VA_ARGS__); \
+ else if (f == GNB_TRACE) AmdIdsDebugPrintGnb (s, __VA_ARGS__); \
+ else AmdIdsDebugPrint (f, s, __VA_ARGS__)
+ #endif
+ #else
+ #define IDS_HDT_CONSOLE AmdIdsDebugPrint
+ #endif
+ #define CONSOLE AmdIdsDebugPrintAll
+ #define IDS_HDT_CONSOLE_DEBUG_CODE(Code) Code
+ #define IDS_TIMEOUT_CTL(t) IdsMemTimeOut (t)
+#else
+ #define IDS_HDT_CONSOLE 1 ? (VOID) 0 : AmdIdsDebugPrint
+ #define IDS_HDT_CONSOLE_DEBUG_CODE(Code)
+ #define CONSOLE CONSOLE_Needs_To_Be_Removed_For_Production_Build //"WARNING: CONSOLE needs to be removed for production builds."
+ #define IDS_TIMEOUT_CTL(t)
+#endif
+
+/// Macros for serial port tracing
+#ifdef IDSOPT_SERIAL_PORT
+ #define IDS_SERIAL_PORT IDSOPT_SERIAL_PORT
+#endif
+
+#ifndef IDS_SERIAL_PORT
+ #define IDS_SERIAL_PORT 0x3F8
+#endif
+
+// Macros for redirect IO tracing
+#ifdef IDSOPT_DEBUG_PRINT_IO_PORT
+ #define IDS_DEBUG_PRINT_IO_PORT IDSOPT_DEBUG_PRINT_IO_PORT
+#endif
+
+#ifndef IDS_DEBUG_PRINT_IO_PORT
+ #define IDS_DEBUG_PRINT_IO_PORT 0x80
+#endif
+
+#define IDS_DPRAM_BASE 0
+#define IDS_DPRAM_SIZE 0
+///Default policy, shift the old data when buffer full
+#define IDS_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL FALSE
+#if IDSOPT_TRACING_CONSOLE_RAM == TRUE
+ #ifdef IDSOPT_DPRAM_BASE
+ #undef IDS_DPRAM_BASE
+ #define IDS_DPRAM_BASE IDSOPT_DPRAM_BASE
+ #else
+ #error "Debug Print Ram Base not specified, please define IDSOPT_DPRAM_BASE in optionsids.h"
+ #endif
+
+ #ifdef IDSOPT_DPRAM_SIZE
+ #undef IDS_DPRAM_SIZE
+ #define IDS_DPRAM_SIZE IDSOPT_DPRAM_SIZE
+ #else
+ #error "Debug Print Ram size not specified, please define IDSOPT_DPRAM_SIZE in optionsids.h"
+ #endif
+
+ #ifdef IDSOPT_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL
+ #define IDS_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL IDSOPT_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL
+ #endif
+#endif
+/**
+ * Macros to add HDT OUT
+ *
+ * The default minimal action is to do nothing and there is no any code to increase.
+ * For debug environments, the debug information can be displayed in HDT or other
+ * devices.
+ *
+ **/
+#if IDSOPT_TRACING_CONSOLE_HDTOUT == TRUE
+ #undef IDS_HDT_CONSOLE_INIT
+ #undef IDS_HDT_CONSOLE_EXIT
+ #define IDS_HDT_CONSOLE_INIT(x) AmdIdsHdtOutInit (x)
+ #define IDS_HDT_CONSOLE_EXIT(x) AmdIdsHdtOutExit (x)
+ #define IDS_HDT_CONSOLE_S3_EXIT(x) AmdIdsHdtOutS3Exit (x)
+ #define IDS_HDT_CONSOLE_S3_AP_EXIT(x) AmdIdsHdtOutS3ApExit (x)
+
+ #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x) AmdIdsHdtOutBufferFlush (x)
+ #define IDS_HDT_CONSOLE_ASSERT(x) AmdIdsDebugPrintAssert (x)
+ #define IDS_FUNCLIST_ADDR ScriptFuncList
+ #define IDS_FUNCLIST_EXTERN() extern SCRIPT_FUNCTION ScriptFuncList[]
+#else
+ #define IDS_HDT_CONSOLE_S3_EXIT(x)
+ #define IDS_HDT_CONSOLE_S3_AP_EXIT(x)
+ #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x)
+ #define IDS_HDT_CONSOLE_ASSERT(x)
+ #define IDS_FUNCLIST_ADDR NULL
+ #define IDS_FUNCLIST_EXTERN()
+#endif
+
+#if IDSOPT_TRACING_ENABLED == TRUE
+ #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE
+ #undef IDS_HDT_CONSOLE
+ #define IDS_HDT_CONSOLE IDSOPT_CUSTOMIZE_TRACING_SERVICE
+ #endif
+ #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT
+ #undef IDS_HDT_CONSOLE_INIT
+ #define IDS_HDT_CONSOLE_INIT(x) IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT (x)
+ #endif
+ #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT
+ #undef IDS_HDT_CONSOLE_EXIT
+ #define IDS_HDT_CONSOLE_EXIT(x) IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT (x)
+ #endif
+#endif
+
+#define IDS_TRACE_SHOW_BLD_OPT_CFG IDSOPT_TRACE_USER_OPTIONS
+
+#if IDSOPT_PERF_ANALYSIS == TRUE
+ #include "IdsPerf.h"
+ #ifdef STOP_CODE
+ #undef STOP_CODE
+ #endif
+ #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \
+ ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \
+ (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000))
+
+ #define IDS_PERF_TIMESTAMP(ID, StdHeader) IdsPerfTimestamp (STOP_CODE, ID, (StdHeader))
+ #define IDS_PERF_ANALYSE(StdHeader) IdsPerfAnalyseTimestamp (StdHeader)
+#else
+ #define IDS_PERF_TIMESTAMP(ID, StdHeader)
+ #define IDS_PERF_ANALYSE(StdHeader)
+#endif
+
+///For IDS feat use
+#define IDS_FAMILY_ALL 0xFFFFFFFFFFFFFFFFull
+#define IDS_BSP_ONLY TRUE
+#define IDS_ALL_CORES FALSE
+
+#define IDS_LATE_RUN_AP_TASK_ID PROC_IDS_LIBRARY_IDSLIB_FILECODE
+
+#define IDS_CALLOUT_INIT 0x01 ///< The function data of IDS callout function of initialization.
+
+#define IDS_CALLOUT_GNB_INTEGRATED_TABLE_CONFIG 0x84 ///< The function data of IDS callout function of GNB integrated table.
+#define IDS_CALLOUT_GNB_NB_POWERGATE_CONFIG 0x85 ///< The function data of IDS callout function of GNB NB power gate config.
+#define IDS_CALLOUT_GNB_PCIE_POWERGATE_CONFIG 0x86 ///< The function data of IDS callout function of GNB PCIE power gateconfig.
+#define IDS_CALLOUT_GNB_PCIE_PLATFORM_CONFIG 0x87 ///< The function data of IDS callout function of GNB pcie platform config.
+#define IDS_CALLOUT_GNB_PCIE_PHY_CONFIG 0x88 ///< The function data of IDS callout function of GNB pcie PHY config.
+#define IDS_CALLOUT_GNB_GMM_REGISTER_OVERRIDE 0x89 ///< The function data of IDS callout function of GNB GMM register override
+#define IDS_CALLOUT_MTC1E_PLATFORM_CONFIG 0x8A ///< The function data of IDS callout function of Message Triggered C1e platform config.
+#define IDS_CALLOUT_FCH_INIT_RESET 0x8B ///< The function data of IDS callout function of FchInitReset
+#define IDS_CALLOUT_FCH_INIT_ENV 0x8C ///< The function data of IDS callout function of FchInitEnv.
+#define IDS_CALLOUT_GET_PERF_BUFFER 0x8E ///< The function data of IDS callout function of get platform performance buffer.
+#define IDS_CALLOUT_SMU_PORT80_LOGGING_BUFFER 0x90 ///< The function data of IDS callout function of SMU port80 logging buffer.
+#define IDS_CALLOUT_GNB_BEFORE_EARLY_INIT 0x91 ///< The function data of IDS callout function of GNB before early init.
+
+/// Function entry for HDT script to call
+typedef struct _SCRIPT_FUNCTION {
+ UINT32 FuncAddr; ///< Function address in ROM
+ CHAR8 FuncName[40]; ///< Function name
+} SCRIPT_FUNCTION;
+
+/// Data Structure for Mem ECC parameter override
+typedef struct {
+ IN BOOLEAN CfgEccRedirection; ///< ECC Redirection
+ IN UINT16 CfgScrubDramRate; ///< Scrub Dram Rate
+ IN UINT16 CfgScrubL2Rate; ///< Scrub L2Rate
+ IN UINT16 CfgScrubL3Rate; ///< Scrub L3Rate
+ IN UINT16 CfgScrubIcRate; ///< Scrub Ic Rate
+ IN UINT16 CfgScrubDcRate; ///< Scrub Dc Rate
+ IN BOOLEAN CfgEccSyncFlood; ///< ECC Sync Flood
+} ECC_OVERRIDE_STRUCT;
+
+
+
+
+/**
+ * AGESA Test Points
+ *
+ * These are the values displayed to the user to indicate progress through boot.
+ * These can be used in a debug environment to stop the debugger at a specific
+ * test point:
+ * For SimNow!, this command
+ * bi 81 w vb 49
+ * will stop the debugger on one of the TracePoints (49 is the TP value in this example).
+ *
+ */
+typedef enum {
+ StartProcessorTestPoints, ///< 00 Entry used for range testing for @b Processor related TPs
+
+ // Memory test points
+ TpProcMemBeforeMemDataInit, ///< 01 .. Memory structure initialization (Public interface)
+ TpProcMemBeforeSpdProcessing, ///< 02 .. SPD Data processing (Public interface)
+ TpProcMemAmdMemAuto, ///< 03 .. Memory configuration (Public interface)
+ TpProcMemDramInit, ///< 04 .. DRAM initialization
+ TpProcMemSPDChecking, ///< 05 ..
+ TpProcMemModeChecking, ///< 06 ..
+ TpProcMemSpeedTclConfig, ///< 07 .. Speed and TCL configuration
+ TpProcMemSpdTiming, ///< 08 ..
+ TpProcMemDramMapping, ///< 09 ..
+ TpProcMemPlatformSpecificConfig, ///< 0A ..
+ TPProcMemPhyCompensation, ///< 0B ..
+ TpProcMemStartDcts, ///< 0C ..
+ TpProcMemBeforeDramInit, ///< 0D .. (Public interface)
+ TpProcMemPhyFenceTraining, ///< 0E ..
+ TpProcMemSynchronizeDcts, ///< 0F ..
+ TpProcMemSystemMemoryMapping, ///< 10 ..
+ TpProcMemMtrrConfiguration, ///< 11 ..
+ TpProcMemDramTraining, ///< 12 ..
+ TpProcMemBeforeAnyTraining, ///< 13 .. (Public interface)
+ TpProcMemWriteLevelizationTraining, ///< 14 ..
+ TpProcMemWlFirstPass, ///< 15 .. Below 800Mhz first pass start
+ TpProcMemWlSecondPass, ///< 16 .. Above 800Mhz second pass start
+ TpProcMemWlTrainTargetDimm, ///< 17 .. Target DIMM configured
+ TpProcMemWlPrepDimms, ///< 18 .. Prepare DIMMS for WL
+ TpProcMemWlConfigDimms, ///< 19 .. Configure DIMMS for WL
+ TpProcMemReceiverEnableTraining, ///< 1A ..
+ TpProcMemRcvrStartSweep, ///< 1B .. Start sweep loop
+ TpProcMemRcvrSetDelay, ///< 1C .. Set receiver Delay
+ TpProcMemRcvrWritePattern, ///< 1D .. Write test pattern
+ TpProcMemRcvrReadPattern, ///< 1E .. Read test pattern
+ TpProcMemRcvrTestPattern, ///< 1F .. Compare test pattern
+ TpProcMemRcvrCalcLatency, ///< 20 .. Calculate MaxRdLatency per channel
+ TpProcMemReceiveDqsTraining, ///< 21 ..
+ TpProcMemRcvDqsSetDelay, ///< 22 .. Set Write Data delay
+ TpProcMemRcvDqsWritePattern, ///< 23 .. Write test pattern
+ TpProcMemRcvDqsStartSweep, ///< 24 .. Start read sweep
+ TpProcMemRcvDqsSetRcvDelay, ///< 25 .. Set Receive DQS delay
+ TpProcMemRcvDqsReadPattern, ///< 26 .. Read Test pattern
+ TpProcMemRcvDqsTstPattern, ///< 27 .. Compare Test pattern
+ TpProcMemRcvDqsResults, ///< 28 .. Update results
+ TpProcMemRcvDqsFindWindow, ///< 29 .. Start Find passing window
+ TpProcMemTransmitDqsTraining, ///< 2A ..
+ TpProcMemTxDqStartSweep, ///< 2B .. Start write sweep
+ TpProcMemTxDqSetDelay, ///< 2C .. Set Transmit DQ delay
+ TpProcMemTxDqWritePattern, ///< 2D .. Write test pattern
+ TpProcMemTxDqReadPattern, ///< 2E .. Read Test pattern
+ TpProcMemTxDqTestPattern, ///< 2F .. Compare Test pattern
+ TpProcMemTxDqResults, ///< 30 .. Update results
+ TpProcMemTxDqFindWindow, ///< 31 .. Start Find passing window
+ TpProcMemMaxRdLatencyTraining, ///< 32 ..
+ TpProcMemMaxRdLatStartSweep, ///< 33 .. Start sweep
+ TpProcMemMaxRdLatSetDelay, ///< 34 .. Set delay
+ TpProcMemMaxRdLatWritePattern, ///< 35 .. Write test pattern
+ TpProcMemMaxRdLatReadPattern, ///< 36 .. Read Test pattern
+ TpProcMemMaxRdLatTestPattern, ///< 37 .. Compare Test pattern
+ TpProcMemOnlineSpareInit, ///< 38 .. Online Spare init
+ TpProcMemBankInterleaveInit, ///< 39 .. Bank Interleave Init
+ TpProcMemNodeInterleaveInit, ///< 3A .. Node Interleave Init
+ TpProcMemChannelInterleaveInit, ///< 3B .. Channel Interleave Init
+ TpProcMemEccInitialization, ///< 3C .. ECC initialization
+ TpProcMemPlatformSpecificInit, ///< 3D .. Platform Specific Init
+ TpProcMemBeforeAgesaReadSpd, ///< 3E .. Before callout for "AgesaReadSpd"
+ TpProcMemAfterAgesaReadSpd, ///< 3F .. After callout for "AgesaReadSpd"
+ TpProcMemBeforeAgesaHookBeforeDramInit, ///< 40 .. Before optional callout "AgesaHookBeforeDramInit"
+ TpProcMemAfterAgesaHookBeforeDramInit, ///< 41 .. After optional callout "AgesaHookBeforeDramInit"
+ TpProcMemBeforeAgesaHookBeforeDQSTraining, ///< 42 .. Before optional callout "AgesaHookBeforeDQSTraining"
+ TpProcMemAfterAgesaHookBeforeDQSTraining, ///< 43 .. After optional callout "AgesaHookBeforeDQSTraining"
+ TpProcMemBeforeAgesaHookBeforeExitSelfRef, ///< 44 .. Before optional callout "AgesaHookBeforeDramInit"
+ TpProcMemAfterAgesaHookBeforeExitSelfRef, ///< 45 .. After optional callout "AgesaHookBeforeDramInit"
+ TpProcMemAfterMemDataInit, ///< 46 .. After MemDataInit
+ TpProcMemInitializeMCT, ///< 47 .. Before InitializeMCT
+ TpProcMemLvDdr3, ///< 48 .. Before LV DDR3
+ TpProcMemInitMCT, ///< 49 .. Before InitMCT
+ TpProcMemOtherTiming, ///< 4A.. Before OtherTiming
+ TpProcMemUMAMemTyping, ///< 4B .. Before UMAMemTyping
+ TpProcMemSetDqsEccTmgs, ///< 4C .. Before SetDqsEccTmgs
+ TpProcMemMemClr, ///< 4D .. Before MemClr
+ TpProcMemOnDimmThermal, ///< 4E .. Before On DIMM Thermal
+ TpProcMemDmi, ///< 4F .. Before DMI
+ TpProcMemEnd, ///< 50 .. End of memory code
+
+ // CPU test points
+ TpProcCpuEntryDmi, ///< 51 .. Entry point CreateDmiRecords
+ TpProcCpuEntryPstate, ///< 52 .. Entry point GenerateSsdt
+ TpProcCpuEntryPstateLeveling, ///< 53 .. Entry point PStateLeveling
+ TpProcCpuEntryPstateGather, ///< 54 .. Entry point PStateGatherData
+ TpProcCpuEntryWhea, ///< 55 .. Entry point CreateAcpiWhea
+ TpProcCpuEntrySrat, ///< 56 .. Entry point CreateAcpiSrat
+ TpProcCpuEntrySlit, ///< 57 .. Entry point CreateAcpiSlit
+ TpProcCpuProcessRegisterTables, ///< 58 .. Register table processing
+ TpProcCpuSetBrandID, ///< 59 .. Set brand ID
+ TpProcCpuLocalApicInit, ///< 5A .. Initialize local APIC
+ TpProcCpuLoadUcode, ///< 5B .. Load microcode patch
+ TpProcCpuBeforePMFeatureInit, ///< 5C .. BeforePM feature dispatch point
+ TpProcCpuPowerMgmtInit, ///< 5D .. Power Management table processing
+ TpProcCpuEarlyFeatureInit, ///< 5E .. Early feature dispatch point
+ TpProcCpuCoreLeveling, ///< 5F .. Core Leveling
+ TpProcCpuApMtrrSync, ///< 60 .. AP MTRR sync up
+ TpProcCpuPostFeatureInit, ///< 61 .. POST feature dispatch point
+ TpProcCpuFeatureLeveling, ///< 62 .. CPU Feature Leveling
+ TpProcCpuBeforeRelinquishAPsFeatureInit, ///< 63 .. Before Relinquishing control of APs feature dispatch point
+ TpProcCpuBeforeAllocateWheaBuffer, ///< 64 .. Before the WHEA init code calls out to allocate a buffer
+ TpProcCpuAfterAllocateWheaBuffer, ///< 65 .. After the WHEA init code calls out to allocate a buffer
+ TpProcCpuBeforeAllocateSratBuffer, ///< 66 .. Before the SRAT init code calls out to allocate a buffer
+ TpProcCpuAfterAllocateSratBuffer, ///< 67 .. After the SRAT init code calls out to allocate a buffer
+ TpProcCpuBeforeLocateSsdtBuffer, ///< 68 .. Before the P-state init code calls out to locate a buffer
+ TpProcCpuAfterLocateSsdtBuffer, ///< 69 .. After the P-state init code calls out to locate a buffer
+ TpProcCpuBeforeAllocateSsdtBuffer, ///< 6A .. Before the P-state init code calls out to allocate a buffer
+ TpProcCpuAfterAllocateSsdtBuffer, ///< 6B .. After the P-state init code calls out to allocate a buffer
+ TpProcCpuEntryCrat, ///< 6C .. Entry point CreateAcpiCrat
+ TpProcCpuEntryCdit, ///< 6D .. Entry point CreateAcpiCdit
+ TpProcCpuEntryScs, ///< 6E .. Entry point InitializeScsFeature
+
+ // HT test points
+ TpProcHtEntry = 0x71, ///< 71 .. Coherent Discovery begin (Public interface)
+ TpProcHtTopology, ///< 72 .. Topology match, routing, begin
+ TpProcHtManualNc, ///< 73 .. Manual Non-coherent Init begin
+ TpProcHtAutoNc, ///< 74 .. Automatic Non-coherent init begin
+ TpProcHtOptGather, ///< 75 .. Optimization: Gather begin
+ TpProcHtOptRegang, ///< 76 .. Optimization: Regang begin
+ TpProcHtOptLinks, ///< 77 .. Optimization: Link Begin
+ TpProcHtOptSubLinks, ///< 78 .. Optimization: Sublinks begin
+ TpProcHtOptFinish, ///< 79 .. Optimization: Set begin
+ TpProcHtTrafficDist, ///< 7A .. Traffic Distribution begin
+ TpProcHtTuning, ///< 7B .. Misc Tuning Begin
+ TpProcHtDone, ///< 7C .. HT Init complete
+ TpProcHtApMapEntry, ///< 7D .. AP HT: Init Maps begin
+ TpProcHtApMapDone, ///< 7E .. AP HT: Complete
+
+ // Extended memory test point
+ TpProcMemSendMRS2 = 0x80, ///< 80 .. Sending MRS2
+ TpProcMemSendMRS3, ///< 81 .. Sedding MRS3
+ TpProcMemSendMRS1, ///< 82 .. Sending MRS1
+ TpProcMemSendMRS0, ///< 83 .. Sending MRS0
+ TpProcMemContinPatternGenRead, ///< 84 .. Continuous Pattern Read
+ TpProcMemContinPatternGenWrite, ///< 85 .. Continuous Pattern Write
+ TpProcMem2dRdDqsTraining, ///< 86 .. Mem: 2d RdDqs Training begin
+ TpProcMemBefore2dTrainExtVrefChange,///< 87 .. Mem: Before optional callout to platform BIOS to change External Vref during 2d Training
+ TpProcMemAfter2dTrainExtVrefChange, ///< 88 .. Mem: After optional callout to platform BIOS to change External Vref during 2d Training
+ TpProcMemConfigureDCTForGeneral, ///< 89 .. Configure DCT For General use begin
+ TpProcMemProcConfigureDCTForTraining, ///< 8A .. Configure DCT For training begin
+ TpProcMemConfigureDCTNonExplicitSeq,///< 8B .. Configure DCT For Non-Explicit
+ TpProcMemSynchronizeChannels, ///< 8C .. Configure to Sync channels
+ TpProcMemC6StorageAllocation, ///< 8D .. Allocate C6 Storage
+
+ // Gnb Earlier init
+ TpGnbEarlierPcieConfigurationInit = 0x90, ///< 90 .. GNB earlier PCIE configuration init
+ TpGnbEarlierInterface = 0x91, ///< 91 .. GNB earlier interface
+ // Gnb Early init
+ TpGnbEarlyInterface = 0x92, ///< 92 .. GNB early interface
+ TpNbSmuInitFeatureAtEarly, ///< 93 .. GNB early SMU service init
+ TpGnbPcieConfigurationMap, ///< 94 .. GNB early PCIE configuration map
+ TpGnbPcieEarlyInterface, ///< 95 .. GNB early PCIE interface
+ //Gnb post init
+ TpGnbPciePostEarlyInterface = 0x96, ///< 96 .. GNB post early interface
+ TpGnbGfxConfigPostInterface, ///< 97 .. GNB post GFX config interface
+ TpGnbGfxPostInterface, ///< 98 .. GNB post GFX interface
+ // Gnb post after DRAM init
+ TpGnbPostInterface = 0x99, ///< 99 .. GNB post after DRAM interface
+ TpGnbPciePostInterface, ///< 9A .. GNB post after DRAM PCIE interface
+ // Gnb Env init
+ TpNbF1Feature = 0x9B, ///< 9B
+ TpGnbEnvInterface, ///< 9C .. GNB Env Nb interface
+ TpGnbPcieEnvInterface, ///< 9D .. GNB Env PCIE interface
+ TpGnbGfxConfigEnvInterface, ///< 9E .. GNB Env GFX Config interface
+ TpGnbGfxEnvInterface, ///< 9F .. GNB Env GFX interface
+ TpNbPowerGateFeature, ///< A0 .. GNB Env NB power gating feature
+ // Gnb Mid init
+ TpGnbGfxConfigMidInterface = 0xA1, ///< A1 .. GNB Mid GFX config interface
+ TpGnbGfxMidInterface, ///< A2 .. GNB Mid GFX interface
+ TpGnbCableSafeEntry, ///< A3 .. GNB Mid cable safe
+ TpPcieMidInterface, ///< A4 .. GNB Mid PCIE interface
+ TpGnbMidInterface, ///< A5 .. GNB Mid interface
+ TpNbLclkFeature, ///< A6 .. GNB Mid Nclk feature
+ TpPciePowerGateFeature, ///< A7 .. GNB Mid pcie power gate feature
+ TpGnbPcieMaxPayloadInterface, ///< A8 .. GNB Mid pcie max payload interface
+ TpGnbPcieClkPmInterface, ///< A8 .. GNB Mid pcie clk pm port interface
+ TpGnbPcieAspmInterface, ///< A9 .. GNB Mid pcie ASPM interface
+ TpGnbNbIoapicInterface, ///< AA .. GNB Mid IOAPIC interface
+ // Gnb Late init
+ TpGnbPcieAlibFeature = 0xAB, ///< AB .. GNB Late pcie ALIB feature
+ TpGnbIommuIvrsTable, ///< AC .. GNB Late pcie IOMMU
+ // Gnb S3 Save
+ TpGnbGfxInitSview = 0xAD, ///< AD .. GNB S3SAVE GFX sview init
+
+ EndGnbTestPoints = 0xAF, ///< AF End of TP range for GNB
+
+ StartFchTestPoints = 0xB0, ///< B0 Entry used for range testing for @b FCH related TPs
+ TpFchInitResetDispatching, ///< B1 .. FCH InitReset dispatch point
+ TpFchGppBeforePortTraining, ///< B2 .. Before FCH GPP port training
+ TpFchGppGen1PortPolling, ///< B3 .. FCH GPP port polling with GEN1 speed
+ TpFchGppGen2PortPolling, ///< B4 .. FCH GPP port polling with GEN2 speed
+ TpFchGppAfterPortTraining, ///< B5 .. After FCH GPP port training
+ TpFchInitEnvDispatching, ///< B6 .. FCH InitEnv dispatch point
+ TpFchInitMidDispatching, ///< B7 .. FCH InitMid dispatch point
+ TpFchInitLateDispatching, ///< B8 .. FCH InitLate dispatch point
+ TpFchGppHotPlugging, ///< B9 .. FCH GPP hot plug event
+ TpFchGppHotUnplugging, ///< BA .. AFCH GPP hot unplug event
+ TpFchInitS3EarlyDispatching, ///< BB .. FCH InitS3Early dispatch point
+ TpFchInitS3LateDispatching, ///< BC .. FCH InitS3Late dispatch point
+ EndFchTestPoints, ///< BF End of TP range for FCH
+
+ // Interface test points
+ TpIfAmdInitResetEntry = 0xC0, ///< C0 .. Entry to AmdInitReset
+ TpIfAmdInitResetExit, ///< C1 .. Exiting from AmdInitReset
+ TpIfAmdInitRecoveryEntry, ///< C2 .. Entry to AmdInitRecovery
+ TpIfAmdInitRecoveryExit, ///< C3 .. Exiting from AmdInitRecovery
+ TpIfAmdInitEarlyEntry, ///< C4 .. Entry to AmdInitEarly
+ TpIfAmdInitEarlyExit, ///< C5 .. Exiting from AmdInitEarly
+ TpIfAmdInitPostEntry, ///< C6 .. Entry to AmdInitPost
+ TpIfAmdInitPostExit, ///< C7 .. Exiting from AmdInitPost
+ TpIfAmdInitEnvEntry, ///< C8 .. Entry to AmdInitEnv
+ TpIfAmdInitEnvExit, ///< C9 .. Exiting from AmdInitEnv
+ TpIfAmdInitMidEntry, ///< CA .. Entry to AmdInitMid
+ TpIfAmdInitMidExit, ///< CB .. Exiting from AmdInitMid
+ TpIfAmdInitLateEntry, ///< CC .. Entry to AmdInitLate
+ TpIfAmdInitLateExit, ///< CD .. Exiting from AmdInitLate
+ TpIfAmdS3SaveEntry, ///< CE .. Entry to AmdS3Save
+ TpIfAmdS3SaveExit, ///< CF .. Exiting from AmdS3Save
+ TpIfAmdInitResumeEntry, ///< D0 .. Entry to AmdInitResume
+ TpIfAmdInitResumeExit, ///< D1 .. Exiting from AmdInitResume
+ TpIfAmdS3LateRestoreEntry, ///< D2 .. Entry to AmdS3LateRestore
+ TpIfAmdS3LateRestoreExit, ///< D3 .. Exiting from AmdS3LateRestore
+ TpIfAmdLateRunApTaskEntry, ///< D4 .. Entry to AmdS3LateRestore
+ TpIfAmdLateRunApTaskExit, ///< D5 .. Exiting from AmdS3LateRestore
+ TpIfAmdReadEventLogEntry, ///< D6 .. Entry to AmdReadEventLog
+ TpIfAmdReadEventLogExit, ///< D7 .. Exiting from AmdReadEventLog
+ TpIfAmdGetApicIdEntry, ///< D8 .. Entry to AmdGetApicId
+ TpIfAmdGetApicIdExit, ///< D9 .. Exiting from AmdGetApicId
+ TpIfAmdGetPciAddressEntry, ///< DA .. Entry to AmdGetPciAddress
+ TpIfAmdGetPciAddressExit, ///< DB .. Exiting from AmdGetPciAddress
+ TpIfAmdIdentifyCoreEntry, ///< DC .. Entry to AmdIdentifyCore
+ TpIfAmdIdentifyCoreExit, ///< DD .. Exiting from AmdIdentifyCore
+ TpIfBeforeRunApFromIds, ///< DE .. After IDS calls out to run code on an AP
+ TpIfAfterRunApFromIds, ///< DF .. After IDS calls out to run code on an AP
+ TpIfBeforeGetIdsData, ///< E0 .. Before IDS calls out to get IDS data
+ TpIfAfterGetIdsData, ///< E1 .. After IDS calls out to get IDS data
+ TpIfBeforeAllocateHeapBuffer, ///< E2 .. Before the heap manager calls out to allocate a buffer
+ TpIfAfterAllocateHeapBuffer, ///< E3 .. After the heap manager calls out to allocate a buffer
+ TpIfBeforeDeallocateHeapBuffer, ///< E4 .. Before the heap manager calls out to deallocate a buffer
+ TpIfAfterDeallocateHeapBuffer, ///< E5 .. After the heap manager calls out to deallocate a buffer
+ TpIfBeforeLocateHeapBuffer, ///< E6 .. Before the heap manager calls out to locate a buffer
+ TpIfAfterLocateHeapBuffer, ///< E7 .. After the heap manager calls out to locate a buffer
+ TpIfBeforeRunApFromAllAps, ///< E8 .. Before the BSP calls out to run code on an AP
+ TpIfAfterRunApFromAllAps, ///< E9 .. After the BSP calls out to run code on an AP
+ TpIfBeforeRunApFromAllCore0s, ///< EA .. Before the BSP calls out to run code on an AP
+ TpIfAfterRunApFromAllCore0s, ///< EB .. After the BSP calls out to run code on an AP
+ TpIfBeforeAllocateS3SaveBuffer, ///< EC .. Before the S3 save code calls out to allocate a buffer
+ TpIfAfterAllocateS3SaveBuffer, ///< ED .. After the S3 save code calls out to allocate a buffer
+ TpIfBeforeAllocateMemoryS3SaveBuffer, ///< EE .. Before the memory S3 save code calls out to allocate a buffer
+ TpIfAfterAllocateMemoryS3SaveBuffer, ///< EF .. After the memory S3 save code calls out to allocate a buffer
+ TpIfBeforeLocateS3PciBuffer, ///< F0 .. Before the memory code calls out to locate a buffer
+ TpIfAfterLocateS3PciBuffer, ///< F1 .. After the memory code calls out to locate a buffer
+ TpIfBeforeLocateS3CPciBuffer, ///< F2 .. Before the memory code calls out to locate a buffer
+ TpIfAfterLocateS3CPciBuffer, ///< F3 .. After the memory code calls out to locate a buffer
+ TpIfBeforeLocateS3MsrBuffer, ///< F4 .. Before the memory code calls out to locate a buffer
+ TpIfAfterLocateS3MsrBuffer, ///< F5 .. After the memory code calls out to locate a buffer
+ TpIfBeforeLocateS3CMsrBuffer, ///< F6 .. Before the memory code calls out to locate a buffer
+ TpIfAfterLocateS3CMsrBuffer, ///< F7 .. After the memory code calls out to locate a buffer
+ TpReadyToBoot, ///< F8 .. Ready to boot event
+ EndAgesaTps = 0xFF, ///< Last defined AGESA TP
+} AGESA_TP;
+
+///Ids Feat description
+typedef enum {
+ IDS_FEAT_UCODE_UPDATE = 0x0000, ///< Feat for Ucode Update
+ IDS_FEAT_TARGET_PSTATE, ///< Feat for Target Pstate
+ IDS_FEAT_POSTPSTATE, ///< Feat for Post Pstate
+ IDS_FEAT_ECC_CTRL, ///< Feat for Ecc Control
+ IDS_FEAT_ECC_SYMBOL_SIZE, ///< Feat for Ecc symbol size
+ IDS_FEAT_DCT_ALLMEMCLK, ///< Feat for all memory clock
+ IDS_FEAT_DCT_GANGMODE, ///< Feat for Dct gang mode
+ IDS_FEAT_DCT_BURSTLENGTH, ///< Feat for dct burst length
+ IDS_FEAT_DCT_POWERDOWN, ///< Feat for dct power down
+ IDS_FEAT_DCT_DLLSHUTDOWN, ///< Feat for dct dll shut down
+ IDS_FEAT_PROBE_FILTER, ///< Feat for probe filter
+ IDS_FEAT_HDTOUT, ///< Feat for hdt out
+ IDS_FEAT_HT_SETTING, ///< Feat for Ht setting
+ IDS_FEAT_GNB_PLATFORMCFG, ///< Feat for override GNB platform config
+ IDS_FEAT_CPB_CTRL, ///< Feat for Config the Core peformance boost feature
+ IDS_FEAT_HTC_CTRL, ///< Feat for Hardware Thermal Control
+ IDS_FEAT_MEMORY_MAPPING, ///< Feat for Memory Mapping
+ IDS_FEAT_POWER_POLICY, ///< Feat for Power Policy
+ IDS_FEAT_NV_TO_CMOS, ///< Feat for Save BSP Nv to CMOS
+ IDS_FEAT_COMMON, ///< Common Feat
+ IDS_FEAT_END = 0xFF ///< End of Common feat
+} IDS_FEAT;
+
+///Ids IDT table function ID
+typedef enum {
+ IDS_IDT_REPLACE_IDTR_FOR_BSC = 0x0000, ///< Function ID for saving IDTR for BSC
+ IDS_IDT_RESTORE_IDTR_FOR_BSC, ///< Function ID for restoring IDTR for BSC
+ IDS_IDT_UPDATE_EXCEPTION_VECTOR_FOR_AP, ///< Function ID for updating exception vector
+} IDS_IDT_FUNC_ID;
+
+typedef IDS_STATUS IDS_COMMON_FUNC (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ );
+
+typedef IDS_COMMON_FUNC *PIDS_COMMON_FUNC;
+
+/// Data Structure of IDS Feature block
+typedef struct _IDS_FAMILY_FEAT_STRUCT {
+ IDS_FEAT IdsFeat; ///< Ids Feat ID
+ BOOLEAN IsBsp; ///< swith for Bsp check
+ AGESA_IDS_OPTION IdsOption; ///< IDS option
+ UINT64 CpuFamily; ///<
+ PIDS_COMMON_FUNC pf_idsoption; ///<pointer to function
+} IDS_FAMILY_FEAT_STRUCT;
+
+
+/// Data Structure of IDS option
+typedef struct _IDS_OPTION_STRUCT {
+ AGESA_IDS_OPTION idsoption; ///< IDS option
+ PIDS_COMMON_FUNC pf_idsoption; ///<pointer to function
+} IDS_OPTION_STRUCT;
+
+/// Data Structure of IDS option table
+typedef struct _IDS_OPTION_STRUCT_TBL {
+ UINT8 version; ///<Version of IDS option table
+ UINT16 size; ///<Size of IDS option table
+ CONST IDS_OPTION_STRUCT *pIdsOptionStruct; ///<pointer to array of structure
+} IDS_OPTION_STRUCT_TBL;
+
+#define IDS_NV_TO_CMOS_LEN_BYTE 1
+#define IDS_NV_TO_CMOS_LEN_WORD 2
+#define IDS_NV_TO_CMOS_LEN_END 0xFF
+#define IDS_NV_TO_CMOS_ID_END 0xFFFF
+
+/// Data struct of set/get NV to/from CMOS
+typedef struct _IDS_NV_TO_CMOS {
+ UINT8 Length; ///< Length of NV
+ UINT16 IDS_NV_ID; ///< IDS id
+} IDS_NV_TO_CMOS;
+
+IDS_STATUS
+AmdIdsCtrlDispatcher (
+ IN AGESA_IDS_OPTION IdsOption,
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+IdsOptionCallout (
+ IN UINTN CallOutId,
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+AmdIdsHdtOutInit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+AmdIdsHdtOutExit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+AmdIdsHdtOutS3Exit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+AmdIdsHdtOutS3ApExit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+AmdIdsDebugPrint (
+ IN UINT64 Flag,
+ IN CONST CHAR8 *Format,
+ IN ...
+ );
+
+VOID
+AmdIdsDebugPrintHt (
+ IN CHAR8 *Format,
+ IN ...
+ );
+
+VOID
+AmdIdsDebugPrintCpu (
+ IN CHAR8 *Format,
+ IN ...
+ );
+
+VOID
+AmdIdsDebugPrintMem (
+ IN CHAR8 *Format,
+ IN ...
+ );
+
+VOID
+AmdIdsDebugPrintGnb (
+ IN CHAR8 *Format,
+ IN ...
+ );
+
+VOID
+AmdIdsDebugPrintAll (
+ IN CHAR8 *Format,
+ IN ...
+ );
+
+VOID
+AmdIdsHdtOutBufferFlush (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+IdsMemTimeOut (
+ IN OUT VOID *DataPtr
+ );
+
+VOID
+IdsAgesaTestPoint (
+ IN AGESA_TP TestPoint,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * IDS Backend Function for ASSERT
+ *
+ * Halt execution with stop code display. Stop Code is displayed on port 80, with rotation so that
+ * it is visible on 8, 16, or 32 bit display. The stop code is alternated with 0xDEAD on the display,
+ * to help distinguish the stop code from a post code loop.
+ * Additional features may be available if using simulation.
+ *
+ * @param[in] FileCode File code(define in FILECODE.h) mix with assert Line num.
+ *
+ * @retval TRUE No error
+**/
+BOOLEAN
+IdsAssert (
+ IN UINT32 FileCode
+ );
+
+/**
+ * The engine code for ASSERT MACRO
+ *
+ * Halt execution with stop code display. Stop Code is displayed on port 80, with rotation so that
+ * it is visible on 8, 16, or 32 bit display. The stop code is alternated with 0xDEAD on the display,
+ * to help distinguish the stop code from a post code loop.
+ * Additional features may be available if using simulation.
+ *
+ * @param[in] FileCode File code(define in FILECODE.h) mix with assert Line num.
+ *
+ */
+BOOLEAN
+IdsErrorStop (
+ IN UINT32 FileCode
+ );
+
+VOID
+IdsDelay (
+VOID);
+
+BOOLEAN
+AmdHeapIntactCheck (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+IdsCarCorruptionCheck (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+IDS_STATUS
+IdsExceptionTrap (
+ IN IDS_IDT_FUNC_ID IdsIdtFuncId,
+ IN VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+IdsPerfTimestamp (
+ IN UINT32 LineInFile,
+ IN UINT32 Description,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+IdsPerfAnalyseTimestamp (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+#if IDSOPT_IDS_ENABLED == FALSE
+ #undef IEM_SKIP_CODE
+ #undef IEM_INSERT_CODE
+#endif
+#ifndef IEM_SKIP_CODE
+ #define IEM_SKIP_CODE(L)
+#endif
+#ifndef IEM_INSERT_CODE
+ #define IEM_INSERT_CODE(L, Fn, Parm)
+#endif
+
+#endif // _IDS_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/IdsHt.h b/src/vendorcode/amd/agesa/f16kb/Include/IdsHt.h
new file mode 100644
index 0000000..1d597c6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/IdsHt.h
@@ -0,0 +1,123 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD IDS HyperTransport Definitions
+ *
+ * Contains AMD AGESA Integrated Debug HT related items.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _IDS_HT_H_
+#define _IDS_HT_H_
+
+// Frequency equates for call backs which take an actual frequency setting
+#define HT_FREQUENCY_200M 0
+#define HT_FREQUENCY_400M 2
+#define HT_FREQUENCY_600M 4
+#define HT_FREQUENCY_800M 5
+#define HT_FREQUENCY_1000M 6
+#define HT_FREQUENCY_1200M 7
+#define HT_FREQUENCY_1400M 8
+#define HT_FREQUENCY_1600M 9
+#define HT_FREQUENCY_1800M 10
+#define HT_FREQUENCY_2000M 11
+#define HT_FREQUENCY_2200M 12
+#define HT_FREQUENCY_2400M 13
+#define HT_FREQUENCY_2600M 14
+#define HT_FREQUENCY_2800M 17
+#define HT_FREQUENCY_3000M 18
+#define HT_FREQUENCY_3200M 19
+#define HT_FREQUENCY_3600M 20
+
+/**
+ * HT IDS: HT Link Port Override params.
+ *
+ * Provide an absolute override of HT Link Port settings. No checking is done that
+ * the settings obey limits or capabilities, this responsibility rests with the user.
+ *
+ * Rules for values of structure items:
+ * - Socket
+ * - HT_LIST_TERMINAL == end of port override list, rest of item is not accessed
+ * - HT_LIST_MATCH_ANY == Match Any Socket
+ * - 0 .. 7 == The matching socket
+ * - Link
+ * - HT_LIST_MATCH_ANY == Match Any package link (that is not the internal links)
+ * - HT_LIST_MATCH_INTERNAL_LINK == Match the internal links
+ * - 0 .. 7 == The matching package link. 0 .. 3 are the ganged links or sublink 0's, 4 .. 7 are the sublink1's.
+ * - Frequency
+ * - HT_LIST_TERMINAL == Do not override the frequency, AUTO setting
+ * - HT_FREQUENCY_200M .. HT_FREQUENCY_3600M = The frequency value to use
+ * - Widthin
+ * - HT_LIST_TERMINAL == Do not override the width, AUTO setting
+ * - 2, 4, 8, 16, 32 == The width value to use
+ * - Widthout
+ * - HT_LIST_TERMINAL == Do not override the width, AUTO setting
+ * - 2, 4, 8, 16, 32 == The width value to use
+ */
+typedef struct {
+ // Match Fields
+ UINT8 Socket; ///< The Socket which this port is on.
+ UINT8 Link; ///< The port for this package link on that socket.
+ // Override fields
+ UINT8 Frequency; ///< Absolutely override the port's frequency.
+ UINT8 WidthIn; ///< Absolutely override the port's width.
+ UINT8 WidthOut; ///< Absolutely override the port's width.
+} HTIDS_PORT_OVERRIDE;
+
+/**
+ * A list of port overrides to search.
+ */
+typedef HTIDS_PORT_OVERRIDE *HTIDS_PORT_OVERRIDE_LIST;
+VOID
+HtIdsGetPortOverride (
+ IN BOOLEAN IsSourcePort,
+ IN OUT PORT_DESCRIPTOR *Port0,
+ IN OUT PORT_DESCRIPTOR *Port1,
+ IN OUT HTIDS_PORT_OVERRIDE_LIST *PortOverrideList,
+ IN STATE_DATA *State
+ );
+
+typedef
+VOID
+F_HtIdsGetPortOverride (
+ IN BOOLEAN IsSourcePort,
+ IN OUT PORT_DESCRIPTOR *Port0,
+ IN OUT PORT_DESCRIPTOR *Port1,
+ IN OUT HTIDS_PORT_OVERRIDE_LIST *PortOverrideList,
+ IN STATE_DATA *State
+ );
+typedef F_HtIdsGetPortOverride* PF_HtIdsGetPortOverride;
+#endif // _IDS_HT_H
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/IdsPerf.h b/src/vendorcode/amd/agesa/f16kb/Include/IdsPerf.h
new file mode 100644
index 0000000..12820850
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/IdsPerf.h
@@ -0,0 +1,139 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Integrated Debug Routines for performance analysis
+ *
+ * Contains AMD AGESA debug macros and functions for performance analysis
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+#ifndef _IDS_PERFORMANCE_DATA_POINT
+
+ #define _IDS_PERFORMANCE_DATA_POINT
+ #define IDS_PERF_VERSION 0x00010000ul //version number 0.1.0.0
+/// Time points performance function used
+ typedef enum {
+ TP_BEGINPROCAMDINITEARLY = 0x100, ///< BeginProcAmdInitEarly
+ TP_ENDPROCAMDINITEARLY = 0x101, ///< EndProcAmdInitEarly
+ TP_BEGINAMDHTINITIALIZE = 0x102, ///< BeginAmdHtInitialize
+ TP_ENDAMDHTINITIALIZE = 0x103, ///< EndAmdHtInitialize
+ TP_BEGINGNBINITATEARLIER = 0x104, ///< BeginGnbInitAtEarlier
+ TP_ENDGNBINITATEARLIER = 0x105, ///< EndGnbInitAtEarlier
+ TP_BEGINAMDCPUEARLY = 0x106, ///< BeginAmdCpuEarly
+ TP_ENDAMDCPUEARLY = 0x107, ///< EndAmdCpuEarly
+ TP_BEGINGNBINITATEARLY = 0x108, ///< BeginGnbInitAtEarly
+ TP_ENDGNBINITATEARLY = 0x109, ///< EndGnbInitAtEarly
+ TP_BEGINPROCAMDINITENV = 0x10A, ///< BeginProcAmdInitEnv
+ TP_ENDPROCAMDINITENV = 0x10B, ///< EndProcAmdInitEnv
+ TP_BEGININITENV = 0x10C, ///< BeginInitEnv
+ TP_ENDINITENV = 0x10D, ///< EndInitEnv
+ TP_BEGINGNBINITATENV = 0x10E, ///< BeginGnbInitAtEnv
+ TP_ENDGNBINITATENV = 0x10F, ///< EndGnbInitAtEnv
+ TP_BEGINPROCAMDINITLATE = 0x110, ///< BeginProcAmdInitLate
+ TP_ENDPROCAMDINITLATE = 0x111, ///< EndProcAmdInitLate
+ TP_BEGINCREATSYSTEMTABLE = 0x112, ///< BeginCreatSystemTable
+ TP_ENDCREATSYSTEMTABLE = 0x113, ///< EndCreatSystemTable
+ TP_BEGINDISPATCHCPUFEATURESLATE = 0x114, ///< BeginDispatchCpuFeaturesLate
+ TP_ENDDISPATCHCPUFEATURESLATE = 0x115, ///< EndDispatchCpuFeaturesLate
+ TP_BEGINAMDCPULATE = 0x116, ///< BeginAmdCpuLate
+ TP_ENDAMDCPULATE = 0x117, ///< EndAmdCpuLate
+ TP_BEGINGNBINITATLATE = 0x118, ///< BeginGnbInitAtLate
+ TP_ENDGNBINITATLATE = 0x119, ///< EndGnbInitAtLate
+ TP_BEGINPROCAMDINITMID = 0x11A, ///< BeginProcAmdInitMid
+ TP_ENDPROCAMDINITMID = 0x11B, ///< EndProcAmdInitMid
+ TP_BEGINDISPATCHCPUFEATURESMID = 0x11C, ///< BeginDispatchCpuFeaturesMid
+ TP_ENDDISPATCHCPUFEATURESMID = 0x11D, ///< EndDispatchCpuFeaturesMid
+ TP_BEGININITMID = 0x11E, ///< BeginInitMid
+ TP_ENDINITMID = 0x11F, ///< EndInitMid
+ TP_BEGINGNBINITATMID = 0x120, ///< BeginGnbInitAtMid
+ TP_ENDGNBINITATMID = 0x121, ///< EndGnbInitAtMid
+ TP_BEGINPROCAMDINITPOST = 0x122, ///< BeginProcAmdInitPost
+ TP_ENDPROCAMDINITPOST = 0x123, ///< EndProcAmdInitPost
+ TP_BEGINGNBINITATPOST = 0x124, ///< BeginGnbInitAtPost
+ TP_ENDGNBINITATPOST = 0x125, ///< EndGnbInitAtPost
+ TP_BEGINAMDMEMAUTO = 0x126, ///< BeginAmdMemAuto
+ TP_ENDAMDMEMAUTO = 0x127, ///< EndAmdMemAuto
+ TP_BEGINAMDCPUPOST = 0x128, ///< BeginAmdCpuPost
+ TP_ENDAMDCPUPOST = 0x129, ///< EndAmdCpuPost
+ TP_BEGINGNBINITATPOSTAFTERDRAM = 0x12A, ///< BeginGnbInitAtPostAfterDram
+ TP_ENDGNBINITATPOSTAFTERDRAM = 0x12B, ///< EndGnbInitAtPostAfterDram
+ TP_BEGINPROCAMDINITRESET = 0x12C, ///< BeginProcAmdInitReset
+ TP_ENDPROCAMDINITRESET = 0x12D, ///< EndProcAmdInitReset
+ TP_BEGININITRESET = 0x12E, ///< BeginInitReset
+ TP_ENDINITRESET = 0x12F, ///< EndInitReset
+ TP_BEGINHTINITRESET = 0x130, ///< BeginHtInitReset
+ TP_ENDHTINITRESET = 0x131, ///< EndHtInitReset
+ TP_BEGINPROCAMDINITRESUME = 0x132, ///< BeginProcAmdInitResume
+ TP_ENDPROCAMDINITRESUME = 0x133, ///< EndProcAmdInitResume
+ TP_BEGINAMDMEMS3RESUME = 0x134, ///< BeginAmdMemS3Resume
+ TP_ENDAMDMEMS3RESUME = 0x135, ///< EndAmdMemS3Resume
+ TP_BEGINDISPATCHCPUFEATURESS3RESUME = 0x136, ///< BeginDispatchCpuFeaturesS3Resume
+ TP_ENDDISPATCHCPUFEATURESS3RESUME = 0x137, ///< EndDispatchCpuFeaturesS3Resume
+ TP_BEGINSETCORESTSCFREQSEL = 0x138, ///< BeginSetCoresTscFreqSel
+ TP_ENDSETCORESTSCFREQSEL = 0x139, ///< EndSetCoresTscFreqSel
+ TP_BEGINMEMFMCTMEMCLR_INIT = 0x13A, ///< BeginMemFMctMemClr_Init
+ TP_ENDNMEMFMCTMEMCLR_INIT = 0x13B, ///< EndnMemFMctMemClr_Init
+ TP_BEGINMEMBEFOREMEMDATAINIT = 0x13C, ///< BeginMemBeforeMemDataInit
+ TP_ENDMEMBEFOREMEMDATAINIT = 0x13D, ///< EndMemBeforeMemDataInit
+ TP_BEGINPROCAMDMEMAUTO = 0x13E, ///< BeginProcAmdMemAuto
+ TP_ENDPROCAMDMEMAUTO = 0x13F, ///< EndProcAmdMemAuto
+ TP_BEGINMEMMFLOWC32 = 0x140, ///< BeginMemMFlowC32
+ TP_ENDMEMMFLOWC32 = 0x141, ///< EndMemMFlowC32
+ TP_BEGINMEMINITIALIZEMCT = 0x142, ///< BeginMemInitializeMCT
+ TP_ENDMEMINITIALIZEMCT = 0x143, ///< EndMemInitializeMCT
+ TP_BEGINMEMSYSTEMMEMORYMAPPING = 0x144, ///< BeginMemSystemMemoryMapping
+ TP_ENDMEMSYSTEMMEMORYMAPPING = 0x145, ///< EndMemSystemMemoryMapping
+ TP_BEGINMEMDRAMTRAINING = 0x146, ///< BeginMemDramTraining
+ TP_ENDMEMDRAMTRAINING = 0x147, ///< EndMemDramTraining
+ TP_BEGINMEMOTHERTIMING = 0x148, ///< BeginMemOtherTiming
+ TP_ENDMEMOTHERTIMING = 0x149, ///< EndMemOtherTiming
+ TP_BEGINMEMUMAMEMTYPING = 0x14A, ///< BeginMemUMAMemTyping
+ TP_ENDMEMUMAMEMTYPING = 0x14B, ///< EndMemUMAMemTyping
+ TP_BEGINMEMMEMCLR = 0x14C, ///< BeginMemMemClr
+ TP_ENDMEMMEMCLR = 0x14D, ///< EndMemMemClr
+ TP_BEGINMEMMFLOWTN = 0x14E, ///< BeginMemMFlowTN
+ TP_ENDMEMMFLOWTN = 0x14F, ///< EndMemMFlowTN
+ TP_BEGINAGESAHOOKBEFOREDRAMINIT = 0x150, ///< BeginAgesaHookBeforeDramInit
+ TP_ENDAGESAHOOKBEFOREDRAMINIT = 0x151, ///< EndAgesaHookBeforeDramInit
+ TP_BEGINPROCMEMDRAMTRAINING = 0x152, ///< BeginProcMemDramTraining
+ TP_ENDPROCMEMDRAMTRAINING = 0x153, ///< EndProcMemDramTraining
+ TP_BEGINGNBINITATS3SAVE = 0x154, ///< BeginGnbInitAtS3Save
+ TP_ENDGNBINITATS3SAVE = 0x155, ///< EndGnbInitAtS3Save
+ TP_BEGINGNBLOADSCSDATA = 0x156, ///< BeginGnbLoadScsData
+ TP_ENDGNBLOADSCSDATA = 0x157, ///< EndGnbLoadScsData
+ TP_BEGINGNBPCIETRAINING = 0x158, ///< BeginGnbPcieTraining
+ TP_ENDGNBPCIETRAINING = 0x159, ///< EndGnbPcieTraining
+ IDS_TP_END ///< End of IDS TP list
+ } IDS_PERF_DATA;
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/KeralaInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/KeralaInstall.h
new file mode 100644
index 0000000..6b16a6c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/KeralaInstall.h
@@ -0,0 +1,143 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build options for a Kerala platform solution
+ *
+ * This file generates the defaults tables for the "Kerala" platform solution
+ * set of processors. The documented build options are imported from a user
+ * controlled file for processing.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 69377 $ @e \$Date: 2012-05-08 03:52:23 -0500 (Tue, 08 May 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFeatures.h"
+#include "Table.h"
+#include "CommonReturns.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "GnbInterface.h"
+
+/*****************************************************************************
+ * Define the RELEASE VERSION string
+ *
+ * The Release Version string should identify the next planned release.
+ * When a branch is made in preparation for a release, the release manager
+ * should change/confirm that the branch version of this file contains the
+ * string matching the desired version for the release. The trunk version of
+ * the file should always contain a trailing 'X'. This will make sure that a
+ * development build from trunk will not be confused for a released version.
+ * The release manager will need to remove the trailing 'X' and update the
+ * version string as appropriate for the release. The trunk copy of this file
+ * should also be updated/incremented for the next expected version, + trailing 'X'
+ ****************************************************************************/
+ // This is the delivery package title, "KabiniPI "
+ // This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING {'K', 'a', 'b', 'i', 'n', 'i', 'P', 'I'}
+
+ // This is the release version number of the AGESA component
+ // This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '1', '.', '0', ' ', ' ', ' ', ' '}
+
+
+// The Kerala solution is defined to be family 0x16 models 0x00 - 0x0F in the FT3 sockets.
+#define INSTALL_FT3_SOCKET_SUPPORT TRUE
+#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT TRUE
+
+#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT
+ #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE
+ #undef INSTALL_FT3_SOCKET_SUPPORT
+ #define INSTALL_FT3_SOCKET_SUPPORT FALSE
+ #endif
+#endif
+
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file. The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE (0)
+#define DFLT_SCRUB_L2_RATE (0)
+#define DFLT_SCRUB_L3_RATE (0)
+#define DFLT_SCRUB_IC_RATE (0)
+#define DFLT_SCRUB_DC_RATE (0)
+#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define DFLT_VRM_SLEW_RATE (5000)
+
+
+#define DFLT_SMBUS0_BASE_ADDRESS 0xB00
+#define DFLT_SMBUS1_BASE_ADDRESS 0xB20
+#define DFLT_SIO_PME_BASE_ADDRESS 0xE00
+#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400
+#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404
+#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x408
+#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410
+#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x420
+#define DFLT_SPI_BASE_ADDRESS 0xFEC10000ul
+#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0ul
+#define DFLT_HPET_BASE_ADDRESS 0xFED00000ul
+#define DFLT_SMI_CMD_PORT 0xB0
+#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00
+#define DFLT_GEC_BASE_ADDRESS 0xFED61000ul
+#define DFLT_AZALIA_SSID 0x780D1022ul
+#define DFLT_SMBUS_SSID 0x780B1022ul
+#define DFLT_IDE_SSID 0x780C1022ul
+#define DFLT_SATA_AHCI_SSID 0x78011022ul
+#define DFLT_SATA_IDE_SSID 0x78001022ul
+#define DFLT_SATA_RAID5_SSID 0x78031022ul
+#define DFLT_SATA_RAID_SSID 0x78021022ul
+#define DFLT_EHCI_SSID 0x78081022ul
+#define DFLT_OHCI_SSID 0x78071022ul
+#define DFLT_LPC_SSID 0x780E1022ul
+#define DFLT_SD_SSID 0x78061022ul
+#define DFLT_XHCI_SSID 0x78121022ul
+#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE
+#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
+#define DFLT_FCH_GPP_LINK_CONFIG PortA4
+#define DFLT_FCH_GPP_PORT0_PRESENT FALSE
+#define DFLT_FCH_GPP_PORT1_PRESENT FALSE
+#define DFLT_FCH_GPP_PORT2_PRESENT FALSE
+#define DFLT_FCH_GPP_PORT3_PRESENT FALSE
+#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE
+// Instantiate all solution relevant data.
+#include "PlatformInstall.h"
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionApmInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionApmInstall.h
new file mode 100644
index 0000000..1624859e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionApmInstall.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Application Power Management (APM).
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_APM_INSTALL_H_
+#define _OPTION_APM_INSTALL_H_
+
+#include "cpuApm.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_CPU_APM_FEAT
+#define F16_APM_SUPPORT
+
+#if OPTION_CPU_APM == TRUE
+ #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ // Family 16H
+ #ifdef OPTION_FAMILY16H
+ #if OPTION_FAMILY16H == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureApm;
+ #undef OPTION_CPU_APM_FEAT
+ #define OPTION_CPU_APM_FEAT &CpuFeatureApm,
+ extern CONST APM_FAMILY_SERVICES ROMDATA F16ApmSupport;
+ #undef F16_APM_SUPPORT
+ #define F16_APM_SUPPORT {AMD_FAMILY_16, &F16ApmSupport},
+ #endif
+ #endif
+ #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA ApmFamilyServiceArray[] =
+{
+ F16_APM_SUPPORT
+ {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA ApmFamilyServiceTable =
+{
+ (sizeof (ApmFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &ApmFamilyServiceArray[0]
+};
+
+#endif // _OPTION_APM_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionC6Install.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionC6Install.h
new file mode 100644
index 0000000..53256ed
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionC6Install.h
@@ -0,0 +1,101 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: C6 C-state
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_C6_STATE_INSTALL_H_
+#define _OPTION_C6_STATE_INSTALL_H_
+
+#include "cpuC6State.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_C6_STATE_FEAT
+#define F15_TN_C6_STATE_SUPPORT
+#define F16_KB_C6_STATE_SUPPORT
+
+#if OPTION_C6_STATE == TRUE
+ #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ #ifdef OPTION_FAMILY15H
+ #if OPTION_FAMILY15H == TRUE
+ #if (OPTION_FAMILY15H_TN == TRUE)
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureC6State;
+ #undef OPTION_C6_STATE_FEAT
+ #define OPTION_C6_STATE_FEAT &CpuFeatureC6State,
+ extern CONST C6_FAMILY_SERVICES ROMDATA F15TnC6Support;
+ #undef F15_TN_C6_STATE_SUPPORT
+ #define F15_TN_C6_STATE_SUPPORT {AMD_FAMILY_15_TN, &F15TnC6Support},
+ #endif
+
+ #endif
+ #endif
+
+ #ifdef OPTION_FAMILY16H
+ #if OPTION_FAMILY16H == TRUE
+ #if OPTION_FAMILY16H_KB == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureC6State;
+ #undef OPTION_C6_STATE_FEAT
+ #define OPTION_C6_STATE_FEAT &CpuFeatureC6State,
+ extern CONST C6_FAMILY_SERVICES ROMDATA F16KbC6Support;
+ #undef F16_KB_C6_STATE_SUPPORT
+ #define F16_KB_C6_STATE_SUPPORT {AMD_FAMILY_16_KB, &F16KbC6Support},
+ #endif
+ #endif
+ #endif
+ #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA C6FamilyServiceArray[] =
+{
+ F15_TN_C6_STATE_SUPPORT
+ F16_KB_C6_STATE_SUPPORT
+ {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA C6FamilyServiceTable =
+{
+ (sizeof (C6FamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &C6FamilyServiceArray[0]
+};
+
+#endif // _OPTION_C6_STATE_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionCdit.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionCdit.h
new file mode 100644
index 0000000..19afc75
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionCdit.h
@@ -0,0 +1,89 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CDIT option API.
+ *
+ * Contains structures and values used to control the CDIT option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_CDIT_H_
+#define _OPTION_CDIT_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Create the ACPI Component Locality Distance Information Table.
+ *
+ */
+typedef AGESA_STATUS OPTION_CDIT_FEATURE (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT VOID **CditPtr
+ );
+
+#define CDIT_STRUCT_VERSION 0x01
+
+/// The Option Configuration of CDIT
+typedef struct {
+ UINT16 OptCditVersion; ///< The version number of CDIT
+ OPTION_CDIT_FEATURE *CditFeature; ///< The Option Feature of CDIT
+ UINT8 OemIdString[6]; ///< Configurable OEM Id
+ UINT8 OemTableIdString[8]; ///< Configurable OEM Table Id
+} OPTION_CDIT_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif // _OPTION_CDIT_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionCditInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionCditInstall.h
new file mode 100644
index 0000000..96ee782
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionCditInstall.h
@@ -0,0 +1,74 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: CDIT
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_CDIT_INSTALL_H_
+#define _OPTION_CDIT_INSTALL_H_
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+
+OPTION_CDIT_FEATURE GetAcpiCditStub;
+#define USER_CDIT_OPTION &GetAcpiCditStub
+
+#if AGESA_ENTRY_INIT_LATE == TRUE
+ #ifndef OPTION_CDIT
+ #error BLDOPT: Option not defined: "OPTION_CDIT"
+ #endif
+ #if OPTION_CDIT == TRUE
+ OPTION_CDIT_FEATURE GetAcpiCditMain;
+ #undef USER_CDIT_OPTION
+ #define USER_CDIT_OPTION &GetAcpiCditMain
+ #endif
+#endif
+
+/* Declare the instance of the CDIT option configuration structure */
+CONST OPTION_CDIT_CONFIGURATION ROMDATA OptionCditConfiguration = {
+ CDIT_STRUCT_VERSION,
+ USER_CDIT_OPTION,
+ {CFG_ACPI_SET_OEM_ID},
+ {CFG_ACPI_SET_OEM_TABLE_ID}
+};
+
+#endif // _OPTION_CDIT_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionCpbInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpbInstall.h
new file mode 100644
index 0000000..42a9ff5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpbInstall.h
@@ -0,0 +1,105 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Core Performance Boost
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_CPB_INSTALL_H_
+#define _OPTION_CPB_INSTALL_H_
+
+#include "cpuCpb.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_CPB_FEAT
+#define F15_TN_CPB_SUPPORT
+#define F16_KB_CPB_SUPPORT
+
+#if OPTION_CPB == TRUE
+ #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE)
+ // Family 15h
+ #ifdef OPTION_FAMILY15H
+ #if OPTION_FAMILY15H == TRUE
+ #if (OPTION_FAMILY15H_TN == TRUE)
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCpb;
+ #undef OPTION_CPB_FEAT
+ #define OPTION_CPB_FEAT &CpuFeatureCpb,
+ extern CONST CPB_FAMILY_SERVICES ROMDATA F15TnCpbSupport;
+ #undef F15_TN_CPB_SUPPORT
+ #define F15_TN_CPB_SUPPORT {AMD_FAMILY_15_TN, &F15TnCpbSupport},
+ #endif
+
+ #endif
+ #endif
+
+
+ // Family 16h
+ #ifdef OPTION_FAMILY16H
+ #if OPTION_FAMILY16H == TRUE
+ #if OPTION_FAMILY16H_KB == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCpb;
+ #undef OPTION_CPB_FEAT
+ #define OPTION_CPB_FEAT &CpuFeatureCpb,
+ extern CONST CPB_FAMILY_SERVICES ROMDATA F16KbCpbSupport;
+ #undef F16_KB_CPB_SUPPORT
+ #define F16_KB_CPB_SUPPORT {AMD_FAMILY_16_KB, &F16KbCpbSupport},
+ #endif
+ #endif
+ #endif
+
+ #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA CpbFamilyServiceArray[] =
+{
+ F15_TN_CPB_SUPPORT
+ F16_KB_CPB_SUPPORT
+ {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA CpbFamilyServiceTable =
+{
+ (sizeof (CpbFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &CpbFamilyServiceArray[0]
+};
+
+#endif // _OPTION_CPB_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuCacheFlushOnHaltInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuCacheFlushOnHaltInstall.h
new file mode 100644
index 0000000..9e094ec
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuCacheFlushOnHaltInstall.h
@@ -0,0 +1,102 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: CPU Cache Flush On Halt
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_CPU_CACHEFLUSHONHALT_INSTALL_H_
+#define _OPTION_CPU_CACHEFLUSHONHALT_INSTALL_H_
+
+#include "cpuPostInit.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_CPU_CACHE_FLUSH_ON_HALT_FEAT
+#define F15_TN_CPU_CFOH_SUPPORT
+#define F16_KB_CPU_CFOH_SUPPORT
+
+#if OPTION_CPU_CFOH == TRUE
+ #if (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE)
+ #ifdef OPTION_FAMILY15H
+ #if OPTION_FAMILY15H == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCacheFlushOnHalt;
+ #undef OPTION_CPU_CACHE_FLUSH_ON_HALT_FEAT
+ #define OPTION_CPU_CACHE_FLUSH_ON_HALT_FEAT &CpuFeatureCacheFlushOnHalt,
+
+ #if OPTION_FAMILY15H_TN == TRUE
+ extern CONST CPU_CFOH_FAMILY_SERVICES ROMDATA F15TnCacheFlushOnHalt;
+ #undef F15_TN_CPU_CFOH_SUPPORT
+ #define F15_TN_CPU_CFOH_SUPPORT {AMD_FAMILY_15_TN, &F15TnCacheFlushOnHalt},
+ #endif
+
+ #endif
+ #endif
+
+ #ifdef OPTION_FAMILY16H
+ #if OPTION_FAMILY16H == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCacheFlushOnHalt;
+ #undef OPTION_CPU_CACHE_FLUSH_ON_HALT_FEAT
+ #define OPTION_CPU_CACHE_FLUSH_ON_HALT_FEAT &CpuFeatureCacheFlushOnHalt,
+
+ #if OPTION_FAMILY16H_KB == TRUE
+ extern CONST CPU_CFOH_FAMILY_SERVICES ROMDATA F16KbCacheFlushOnHalt;
+ #undef F16_KB_CPU_CFOH_SUPPORT
+ #define F16_KB_CPU_CFOH_SUPPORT {AMD_FAMILY_16_KB, &F16KbCacheFlushOnHalt},
+ #endif
+ #endif
+ #endif
+ #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA CacheFlushOnHaltFamilyServiceArray[] =
+{
+ F16_KB_CPU_CFOH_SUPPORT
+ F15_TN_CPU_CFOH_SUPPORT
+ {0, NULL}
+};
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA CacheFlushOnHaltFamilyServiceTable =
+{
+ (sizeof (CacheFlushOnHaltFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &CacheFlushOnHaltFamilyServiceArray[0]
+};
+
+#endif // _OPTION_CPU_CACHEFLUSHONHALT_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuCoreLevelingInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuCoreLevelingInstall.h
new file mode 100644
index 0000000..4b29b73
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuCoreLevelingInstall.h
@@ -0,0 +1,100 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: CPU Core Leveling
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_CPU_CORELEVELING_INSTALL_H_
+#define _OPTION_CPU_CORELEVELING_INSTALL_H_
+
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_CPU_CORE_LEVELING_FEAT
+#define F15_TN_CPU_CORELEVELING_SUPPORT
+#define F16_KB_CPU_CORELEVELING_SUPPORT
+
+#if OPTION_CPU_CORELEVELING == TRUE
+ #if (AGESA_ENTRY_INIT_EARLY == TRUE)
+ // Family 15h
+ #if OPTION_FAMILY15H == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCoreLeveling;
+ #undef OPTION_CPU_CORE_LEVELING_FEAT
+ #define OPTION_CPU_CORE_LEVELING_FEAT &CpuFeatureCoreLeveling,
+
+ #if (OPTION_FAMILY15H_TN == TRUE)
+ extern CONST CPU_CORE_LEVELING_FAMILY_SERVICES ROMDATA F15TnCoreLeveling;
+ #undef F15_TN_CPU_CORELEVELING_SUPPORT
+ #define F15_TN_CPU_CORELEVELING_SUPPORT {AMD_FAMILY_15_TN, &F15TnCoreLeveling},
+ #endif
+
+ #endif
+
+ // Family 16h
+ #if OPTION_FAMILY16H == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCoreLeveling;
+ #undef OPTION_CPU_CORE_LEVELING_FEAT
+ #define OPTION_CPU_CORE_LEVELING_FEAT &CpuFeatureCoreLeveling,
+
+ #if (OPTION_FAMILY16H_KB == TRUE)
+ extern CONST CPU_CORE_LEVELING_FAMILY_SERVICES ROMDATA F16KbCoreLeveling;
+ #undef F16_KB_CPU_CORELEVELING_SUPPORT
+ #define F16_KB_CPU_CORELEVELING_SUPPORT {AMD_FAMILY_16_KB, &F16KbCoreLeveling},
+ #endif
+ #endif
+
+ #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA CoreLevelingFamilyServiceArray[] =
+{
+ F16_KB_CPU_CORELEVELING_SUPPORT
+ F15_TN_CPU_CORELEVELING_SUPPORT
+ {0, NULL}
+};
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA CoreLevelingFamilyServiceTable =
+{
+ (sizeof (CoreLevelingFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &CoreLevelingFamilyServiceArray[0]
+};
+
+#endif // _OPTION_CPU_CORELEVELING_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuFamiliesInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuFamiliesInstall.h
new file mode 100644
index 0000000..8e61eff
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuFamiliesInstall.h
@@ -0,0 +1,228 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of all appropriate CPU family specific support.
+ *
+ * This file generates the defaults tables for all family specific
+ * combinations.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+/* Default all CPU Specific Service members to off. They
+ will be enabled as needed by cross referencing families
+ with entry points in the family / model install files. */
+#define USES_REGISTER_TABLES FALSE
+#define BASE_FAMILY_PCI FALSE
+#define MODEL_SPECIFIC_PCI FALSE
+#define BASE_FAMILY_MSR FALSE
+#define MODEL_SPECIFIC_MSR FALSE
+#define BASE_FAMILY_HT_PCI FALSE
+#define MODEL_SPECIFIC_HT_PCI FALSE
+#define BASE_FAMILY_WORKAROUNDS FALSE
+
+/*
+ * Pull in family specific services based on entry point
+ */
+#if AGESA_ENTRY_INIT_RESET == TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_RECOVERY == TRUE
+ #undef USES_REGISTER_TABLES
+ #define USES_REGISTER_TABLES TRUE
+ #undef BASE_FAMILY_PCI
+ #define BASE_FAMILY_PCI TRUE
+ #undef MODEL_SPECIFIC_PCI
+ #define MODEL_SPECIFIC_PCI TRUE
+ #undef BASE_FAMILY_MSR
+ #define BASE_FAMILY_MSR TRUE
+ #undef MODEL_SPECIFIC_MSR
+ #define MODEL_SPECIFIC_MSR TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ #undef USES_REGISTER_TABLES
+ #define USES_REGISTER_TABLES TRUE
+ #undef BASE_FAMILY_PCI
+ #define BASE_FAMILY_PCI TRUE
+ #undef MODEL_SPECIFIC_PCI
+ #define MODEL_SPECIFIC_PCI TRUE
+ #undef BASE_FAMILY_MSR
+ #define BASE_FAMILY_MSR TRUE
+ #undef MODEL_SPECIFIC_MSR
+ #define MODEL_SPECIFIC_MSR TRUE
+ #undef BASE_FAMILY_HT_PCI
+ #define BASE_FAMILY_HT_PCI TRUE
+ #undef MODEL_SPECIFIC_HT_PCI
+ #define MODEL_SPECIFIC_HT_PCI TRUE
+ #undef BASE_FAMILY_WORKAROUNDS
+ #define BASE_FAMILY_WORKAROUNDS TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_POST == TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_ENV == TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_MID == TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_LATE == TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_S3SAVE == TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_RESUME == TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_LATE_RESTORE == TRUE
+#endif
+
+#if AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE
+#endif
+
+/*
+ * Initialize PCI MMIO mask to 0
+ */
+#define FAMILY_MMIO_BASE_MASK (0ull)
+
+
+/*
+ * Initialize all families to disabled
+ */
+#define OPT_F15_TABLE
+#define OPT_F16_TABLE
+
+#define OPT_F15_ID_TABLE
+#define OPT_F16_ID_TABLE
+
+
+/*
+ * Install family specific support
+ */
+#if (OPTION_FAMILY15H_TN == TRUE)
+ #include "OptionFamily15hInstall.h"
+#endif
+
+#if (OPTION_FAMILY16H_KB == TRUE)
+ #include "OptionFamily16hInstall.h"
+#endif
+/*
+ * Process PCI MMIO mask
+ */
+
+// If size is 0, but base is not, break the build.
+#if (CFG_PCI_MMIO_BASE != 0) && (CFG_PCI_MMIO_SIZE == 0)
+ #error BLDCFG: Invalid PCI MMIO size -- acceptable values are 1, 2, 4, 8, 16, 32, 64, 128, and 256
+#endif
+
+// If base is 0, but size is not, break the build.
+#if (CFG_PCI_MMIO_BASE == 0) && (CFG_PCI_MMIO_SIZE != 0)
+ #error BLDCFG: Invalid PCI MMIO base -- must be 8MB or greater
+#endif
+
+#if (CFG_PCI_MMIO_BASE != 0) && (CFG_PCI_MMIO_SIZE != 0)
+ // Both are non-zero, begin further processing.
+
+ // Heap runs from 4MB to 8MB. Disallow any addresses below 8MB.
+ #if (CFG_PCI_MMIO_BASE < 0x800000)
+ #error BLDCFG: Invalid PCI MMIO base -- must be 8MB or greater
+ #endif
+
+ // Break the build if the address is too high for the enabled families.
+ #if ((CFG_PCI_MMIO_BASE & FAMILY_MMIO_BASE_MASK) != 0)
+ #error BLDCFG: Invalid PCI MMIO base address for the installed CPU families
+ #endif
+
+ // If the size parameter is not valid, break the build.
+ #if (CFG_PCI_MMIO_SIZE != 1) && (CFG_PCI_MMIO_SIZE != 2) && (CFG_PCI_MMIO_SIZE != 4) && (CFG_PCI_MMIO_SIZE != 8) && (CFG_PCI_MMIO_SIZE != 16)
+ #if (CFG_PCI_MMIO_SIZE != 32) && (CFG_PCI_MMIO_SIZE != 64) && (CFG_PCI_MMIO_SIZE != 128) && (CFG_PCI_MMIO_SIZE != 256)
+ #error BLDCFG: Invalid PCI MMIO size -- acceptable values are 1, 2, 4, 8, 16, 32, 64, 128, and 256
+ #endif
+ #endif
+
+ #define PCI_MMIO_ALIGNMENT ((0x100000ul * CFG_PCI_MMIO_SIZE) - 1)
+ // If the base is not aligned according to size, break the build.
+ #if ((CFG_PCI_MMIO_BASE & PCI_MMIO_ALIGNMENT) != 0)
+ #error BLDCFG: Invalid PCI MMIO base -- must be properly aligned according to MMIO size
+ #endif
+ #undef PCI_MMIO_ALIGNMENT
+#endif
+
+/*
+ * Process sockets / modules
+ */
+#ifndef ADVCFG_PLATFORM_SOCKETS
+ #error BLDOPT Set Family supported sockets.
+#endif
+#ifndef ADVCFG_PLATFORM_MODULES
+ #error BLDOPT Set Family supported modules.
+#endif
+
+CONST OPTIONS_CONFIG_TOPOLOGY ROMDATA TopologyConfiguration =
+{
+ ADVCFG_PLATFORM_SOCKETS,
+ ADVCFG_PLATFORM_MODULES
+};
+
+/*
+ * Instantiate global data needed for processor identification
+ */
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA CpuSupportedFamiliesArray[] =
+{
+ OPT_F15_TABLE
+ OPT_F16_TABLE
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA CpuSupportedFamiliesTable =
+{
+ (sizeof (CpuSupportedFamiliesArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &CpuSupportedFamiliesArray[0]
+};
+
+
+CONST CPU_LOGICAL_ID_FAMILY_XLAT ROMDATA CpuSupportedFamilyIdArray[] =
+{
+ OPT_F15_ID_TABLE
+ OPT_F16_ID_TABLE
+};
+
+CONST CPU_FAMILY_ID_XLAT_TABLE ROMDATA CpuSupportedFamilyIdTable =
+{
+ (sizeof (CpuSupportedFamilyIdArray) / sizeof (CPU_LOGICAL_ID_FAMILY_XLAT)),
+ CpuSupportedFamilyIdArray
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuFeaturesInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuFeaturesInstall.h
new file mode 100644
index 0000000..61c750a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuFeaturesInstall.h
@@ -0,0 +1,83 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of multiple CPU features.
+ *
+ * Aggregates enabled CPU features into a list for the dispatcher to process.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_CPU_FEATURES_INSTALL_H_
+#define _OPTION_CPU_FEATURES_INSTALL_H_
+
+#include "OptionMsgBasedC1eInstall.h"
+#include "OptionL3FeaturesInstall.h"
+#include "OptionCpuCoreLevelingInstall.h"
+#include "OptionIoCstateInstall.h"
+#include "OptionC6Install.h"
+#include "OptionCpbInstall.h"
+#include "OptionApmInstall.h"
+#include "OptionCpuCacheFlushOnHaltInstall.h"
+#include "OptionPstateHpcModeInstall.h"
+#include "OptionLowPwrPstateInstall.h"
+#include "OptionTdpLimitingInstall.h"
+#include "OptionPsiInstall.h"
+#include "OptionHtcInstall.h"
+#include "OptionPrefetchModeInstall.h"
+#include "OptionPreserveMailboxInstall.h"
+
+CONST CPU_FEATURE_DESCRIPTOR* ROMDATA SupportedCpuFeatureList[] =
+{
+ OPTION_MSG_BASED_C1E_FEAT
+ OPTION_L3_FEAT
+ OPTION_CPU_CORE_LEVELING_FEAT
+ OPTION_IO_CSTATE_FEAT
+ OPTION_C6_STATE_FEAT
+ OPTION_CPU_APM_FEAT
+ OPTION_CPB_FEAT
+ OPTION_TDP_LIMIT_FEAT
+ OPTION_CPU_CACHE_FLUSH_ON_HALT_FEAT
+ OPTION_CPU_PSTATE_HPC_MODE_FEAT // this function should be run before low power pstate for prochot
+ OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT_FEAT // this function should be run before creating ACPI objects and after Pstate initialization
+ OPTION_CPU_PSI_FEAT
+ OPTION_CPU_HTC_FEAT
+ OPTION_PREFETCH_MODE_FEAT
+ OPTION_PRESERVE_MAILBOX_FEAT
+ NULL
+};
+
+
+#endif // _OPTION_CPU_FEATURES_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuSpecificServicesInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuSpecificServicesInstall.h
new file mode 100644
index 0000000..987677e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuSpecificServicesInstall.h
@@ -0,0 +1,1297 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of CPU specific services support
+ *
+ * This file generates the CPU specific services tables.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Include
+ * @e \$Revision: 85962 $ @e \$Date: 2013-01-14 20:12:29 -0600 (Mon, 14 Jan 2013) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+
+/*
+
+NOTE:
+
+1. This file is designed to be included multiple times in one file. So there's no includsion guard like below.
+
+#ifndef _OPTION_CPU_FAMILY_SERVICE_INSTALL_DEFAULT_H_
+#define _OPTION_CPU_FAMILY_SERVICE_INSTALL_DEFAULT_H_
+#endif // _OPTION_CPU_FAMILY_SERVICE_INSTALL_DEFAULT_H_
+
+
+2. This file is designed to be included in below form.
+
+//
+// 1st family model specific definitions
+//
+#include "OptionCpuSpecificServicesInstallReset.h"
+#define CpuSrvcTableName cpuFamilyModelServices
+// Put your service definitions "CpuSrvc<ServiceName>" here.
+#define CpuSrvcDisablePstate cpuF1stM1stDisablePstate
+#include "OptionCpuSpecificServicesInstall.h"
+INSTALL_CPU_SPECIFIC_SERVICES_TABLE (CpuSrvcTableName);
+
+//
+// 2nd family model specific definitions
+//
+#include "OptionCpuSpecificServicesInstallReset.h"
+#define CpuSrvcTableName cpuFamilyModelServices
+// Put your service definitions "CpuSrvc<ServiceName>" here.
+#define CpuSrvcDisablePstate cpuF2ndM2ndDisablePstate
+#include "OptionCpuSpecificServicesInstall.h"
+INSTALL_CPU_SPECIFIC_SERVICES_TABLE (CpuSrvcTableName);
+
+
+Example of CPU specific services definitions:
+
+NOTE: Members with type casting should use OvrdDfltCpuSrvc<ServiceName> instead due to automatical "extern" limitation.
+
+#define CpuSrvcRevision (UINT16) Revision
+#define CpuSrvcDisablePstate (PF_CPU_DISABLE_PSTATE) DisablePstate
+#define CpuSrvcTransitionPstate (PF_CPU_TRANSITION_PSTATE) TransitionPstate
+#define CpuSrvcGetProcIddMax (PF_CPU_GET_IDD_MAX) GetProcIddMax
+#define CpuSrvcGetTscRate (PF_CPU_GET_TSC_RATE) GetTscRate
+#define CpuSrvcGetCurrentNbFrequency (PF_CPU_GET_NB_FREQ) GetCurrentNbFrequency
+#define CpuSrvcGetMinMaxNbFrequency (PF_CPU_GET_MIN_MAX_NB_FREQ) GetMinMaxNbFrequency
+#define CpuSrvcGetNbPstateInfo (PF_CPU_GET_NB_PSTATE_INFO) GetNbPstateInfo
+#define CpuSrvcIsNbCofInitNeeded (PF_CPU_IS_NBCOF_INIT_NEEDED) IsNbCofInitNeeded
+#define CpuSrvcGetNbIddMax (PF_CPU_GET_NB_IDD_MAX) GetNbIddMax
+#define CpuSrvcLaunchApCore (PF_CPU_AP_INITIAL_LAUNCH) LaunchApCore
+#define CpuSrvcGetNumberOfPhysicalCores (PF_CPU_NUMBER_OF_PHYSICAL_CORES) GetNumberOfPhysicalCores
+#define CpuSrvcGetApMailboxFromHardware (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) GetApMailboxFromHardware
+#define CpuSrvcSetApCoreNumber (PF_CPU_SET_AP_CORE_NUMBER) SetApCoreNumber
+#define CpuSrvcGetApCoreNumber (PF_CPU_GET_AP_CORE_NUMBER) GetApCoreNumber
+#define CpuSrvcTransferApCoreNumber (PF_CPU_TRANSFER_AP_CORE_NUMBER) TransferApCoreNumber
+#define CpuSrvcGetStoredNodeNumber (PF_CPU_GET_STORED_NODE_NUMBER) GetStoredNodeNumber
+#define CpuSrvcCoreIdPositionInInitialApicId (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CoreIdPositionInInitialApicId
+#define CpuSrvcSaveFeatures (PF_CPU_SAVE_FEATURES) SaveFeatures
+#define CpuSrvcWriteFeatures (PF_CPU_WRITE_FEATURES) WriteFeatures
+#define CpuSrvcSetWarmResetFlag (PF_CPU_SET_WARM_RESET_FLAG) SetWarmResetFlag
+#define CpuSrvcGetWarmResetFlag (PF_CPU_GET_WARM_RESET_FLAG) GetWarmResetFlag
+#define CpuSrvcGetBrandString1 (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetBrandString1
+#define CpuSrvcGetBrandString2 (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetBrandString2
+#define CpuSrvcGetMicroCodePatchesStruct (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetMicroCodePatchesStruct
+#define CpuSrvcGetMicrocodeEquivalenceTable (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetMicrocodeEquivalenceTable
+#define CpuSrvcGetCacheInfo (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetCacheInfo
+#define CpuSrvcGetSysPmTableStruct (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetSysPmTableStruct
+#define CpuSrvcGetWheaInitData (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetWheaInitData
+#define CpuSrvcGetPlatformTypeSpecificInfo (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) GetPlatformTypeSpecificInfo
+#define CpuSrvcIsNbPstateEnabled (PF_IS_NB_PSTATE_ENABLED) IsNbPstateEnabled
+#define CpuSrvcNextLinkHasHtPhyFeats (PF_NEXT_LINK_HAS_HTFPY_FEATS) NextLinkHasHtPhyFeats
+#define CpuSrvcSetHtPhyRegister (PF_SET_HT_PHY_REGISTER) SetHtPhyRegister
+#define CpuSrvcGetNextHtLinkFeatures (PF_GET_NEXT_HT_LINK_FEATURES) GetNextHtLinkFeatures
+#define CpuSrvcRegisterTableList (REGISTER_TABLE **) RegisterTableList
+#define CpuSrvcTableEntryTypeDescriptors (TABLE_ENTRY_TYPE_DESCRIPTOR *) TableEntryTypeDescriptors
+#define CpuSrvcPackageLinkMap (PACKAGE_HTLINK_MAP) PackageLinkMap
+#define CpuSrvcComputeUnitMap (COMPUTE_UNIT_MAP *) ComputeUnitMap
+#define CpuSrvcInitCacheDisabled (FAMILY_CACHE_INIT_POLICY) InitCacheDisabled
+#define CpuSrvcGetEarlyBeforeApLaunchInitOnCoreTable (PF_GET_EARLY_INIT_TABLE) GetEarlyInitBeforeApLaunchOnCoreTable
+#define CpuSrvcGetEarlyAfterApLaunchInitOnCoreTable (PF_GET_EARLY_INIT_TABLE) GetEarlyInitAfterApLaunchOnCoreTable
+#define CpuSrvcPatchLoaderIsSharedByCU (BOOLEAN) TRUE
+
+ USAGE MODEL:
+
+ //
+ // If BUILD_CONFIG_SWITCH = TRUE
+ // If override service is defined, use it as the final service definition.
+ // If override service is not define, use default service (DlftCpuSrvc) as the final service definition.
+ //
+ // If BUILD_CONFIG_SWITCH = FALSE
+ // Use default assert service (AssertCpuSrvc) as the final service definition for making a assertion when unsupported service is called.
+ //
+ // "extern" will be used for function pointer (exclude data) type serive members automatically when CpuSrvc<ServiceName> is defined.
+ //
+
+// Member: (MEMBER_TYPE) ServiceName
+#if BUILD_CONFIG_SWITCH == TRUE
+ #ifdef CpuSrvcServiceName
+ #define FinalCpuSrvcServiceName CpuSrvcServiceName
+ extern MEMBER_TYPE FinalCpuSrvcServiceName;
+ #else
+ #define FinalCpuSrvcServiceName DfltCpuSrvcServiceName
+ #pragma message( STRING_MACRO_DEFAULT_USED(CpuSrvcServiceName) )
+ #endif
+#else
+ #define FinalCpuSrvcServiceName DfltAssertCpuSrvcServiceName
+ #pragma message( STRING_MACRO_DEFAULT_ASSERT_USED(CpuSrvcServiceName) )
+#endif
+
+*/
+
+
+#define STRING2(x) #x
+#define STRING(x) STRING2(x)
+#define CAT_STRING(a, b) a##b
+#define STRING_ARROW " --> "
+
+//
+// Verbose control for messaging CPU services at build time
+//
+#ifndef VERBOSE_CPU_SERVICES
+ #define VERBOSE_CPU_SERVICES 1 // 0 - disable messaging, 1 - enable debugging.
+#endif
+
+#if VERBOSE_CPU_SERVICES
+ #define STRING_MACRO_VALUE(Name) " " #Name " = " STRING(Name)
+ #define STRING_OVERRIDE_MACRO_VALUE(Name) " OVERRIDE: " #Name " : " STRING(Name) STRING_ARROW STRING(Ovrd##Name)
+ #define STRING_MACRO_DEFAULT_USED(Name) " NOT DEFINED: " #Name STRING_ARROW " DEFAULT: " STRING(FinalDflt##Name)
+ #define STRING_MACRO_DEFAULT_ASSERT_USED(Name) " DISABLED: " #Name ", assertion is used."
+
+ #define STRING_SEPARATOR1 "-----------------------------------------------------------------------------------------------"
+ #define STRING_SEPARATOR2 "==============================================================================================="
+ #define STRING_SEPARATOR_POUND "###############################################################################################"
+#else // VERBOSE_CPU_SERVICES
+ #define STRING_MACRO_VALUE(Name) NULL_STRING
+ #define STRING_OVERRIDE_MACRO_VALUE(Name) NULL_STRING
+ #define STRING_MACRO_DEFAULT_USED(Name) NULL_STRING
+ #define STRING_MACRO_DEFAULT_ASSERT_USED(Name) NULL_STRING
+
+
+ #define NULL_STRING ""
+ #define STRING_SEPARATOR1 NULL_STRING
+ #define STRING_SEPARATOR2 NULL_STRING
+ #define STRING_SEPARATOR_POUND NULL_STRING
+#endif // VERBOSE_CPU_SERVICES
+
+//
+// Handle override definitions on DfltAssertCpuSrvc<ServiceName>
+//
+
+#ifdef OvrdDfltAssertCpuSrvcRevision
+ #define FinalDfltAssertCpuSrvcRevision OvrdDfltAssertCpuSrvcRevision
+#else
+ #define FinalDfltAssertCpuSrvcRevision DfltAssertCpuSrvcRevision
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcDisablePstate
+ #define FinalDfltAssertCpuSrvcDisablePstate OvrdDfltAssertCpuSrvcDisablePstate
+#else
+ #define FinalDfltAssertCpuSrvcDisablePstate DfltAssertCpuSrvcDisablePstate
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcTransitionPstate
+ #define FinalDfltAssertCpuSrvcTransitionPstate OvrdDfltAssertCpuSrvcTransitionPstate
+#else
+ #define FinalDfltAssertCpuSrvcTransitionPstate DfltAssertCpuSrvcTransitionPstate
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetProcIddMax
+ #define FinalDfltAssertCpuSrvcGetProcIddMax OvrdDfltAssertCpuSrvcGetProcIddMax
+#else
+ #define FinalDfltAssertCpuSrvcGetProcIddMax DfltAssertCpuSrvcGetProcIddMax
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetTscRate
+ #define FinalDfltAssertCpuSrvcGetTscRate OvrdDfltAssertCpuSrvcGetTscRate
+#else
+ #define FinalDfltAssertCpuSrvcGetTscRate DfltAssertCpuSrvcGetTscRate
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetCurrentNbFrequency
+ #define FinalDfltAssertCpuSrvcGetCurrentNbFrequency OvrdDfltAssertCpuSrvcGetCurrentNbFrequency
+#else
+ #define FinalDfltAssertCpuSrvcGetCurrentNbFrequency DfltAssertCpuSrvcGetCurrentNbFrequency
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetMinMaxNbFrequency
+ #define FinalDfltAssertCpuSrvcGetMinMaxNbFrequency OvrdDfltAssertCpuSrvcGetMinMaxNbFrequency
+#else
+ #define FinalDfltAssertCpuSrvcGetMinMaxNbFrequency DfltAssertCpuSrvcGetMinMaxNbFrequency
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetNbPstateInfo
+ #define FinalDfltAssertCpuSrvcGetNbPstateInfo OvrdDfltAssertCpuSrvcGetNbPstateInfo
+#else
+ #define FinalDfltAssertCpuSrvcGetNbPstateInfo DfltAssertCpuSrvcGetNbPstateInfo
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcIsNbCofInitNeeded
+ #define FinalDfltAssertCpuSrvcIsNbCofInitNeeded OvrdDfltAssertCpuSrvcIsNbCofInitNeeded
+#else
+ #define FinalDfltAssertCpuSrvcIsNbCofInitNeeded DfltAssertCpuSrvcIsNbCofInitNeeded
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetNbIddMax
+ #define FinalDfltAssertCpuSrvcGetNbIddMax OvrdDfltAssertCpuSrvcGetNbIddMax
+#else
+ #define FinalDfltAssertCpuSrvcGetNbIddMax DfltAssertCpuSrvcGetNbIddMax
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcLaunchApCore
+ #define FinalDfltAssertCpuSrvcLaunchApCore OvrdDfltAssertCpuSrvcLaunchApCore
+#else
+ #define FinalDfltAssertCpuSrvcLaunchApCore DfltAssertCpuSrvcLaunchApCore
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetNumberOfPhysicalCores
+ #define FinalDfltAssertCpuSrvcGetNumberOfPhysicalCores OvrdDfltAssertCpuSrvcGetNumberOfPhysicalCores
+#else
+ #define FinalDfltAssertCpuSrvcGetNumberOfPhysicalCores DfltAssertCpuSrvcGetNumberOfPhysicalCores
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetApMailboxFromHardware
+ #define FinalDfltAssertCpuSrvcGetApMailboxFromHardware OvrdDfltAssertCpuSrvcGetApMailboxFromHardware
+#else
+ #define FinalDfltAssertCpuSrvcGetApMailboxFromHardware DfltAssertCpuSrvcGetApMailboxFromHardware
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcSetApCoreNumber
+ #define FinalDfltAssertCpuSrvcSetApCoreNumber OvrdDfltAssertCpuSrvcSetApCoreNumber
+#else
+ #define FinalDfltAssertCpuSrvcSetApCoreNumber DfltAssertCpuSrvcSetApCoreNumber
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetApCoreNumber
+ #define FinalDfltAssertCpuSrvcGetApCoreNumber OvrdDfltAssertCpuSrvcGetApCoreNumber
+#else
+ #define FinalDfltAssertCpuSrvcGetApCoreNumber DfltAssertCpuSrvcGetApCoreNumber
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcTransferApCoreNumber
+ #define FinalDfltAssertCpuSrvcTransferApCoreNumber OvrdDfltAssertCpuSrvcTransferApCoreNumber
+#else
+ #define FinalDfltAssertCpuSrvcTransferApCoreNumber DfltAssertCpuSrvcTransferApCoreNumber
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetStoredNodeNumber
+ #define FinalDfltAssertCpuSrvcGetStoredNodeNumber OvrdDfltAssertCpuSrvcGetStoredNodeNumber
+#else
+ #define FinalDfltAssertCpuSrvcGetStoredNodeNumber DfltAssertCpuSrvcGetStoredNodeNumber
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcCoreIdPositionInInitialApicId
+ #define FinalDfltAssertCpuSrvcCoreIdPositionInInitialApicId OvrdDfltAssertCpuSrvcCoreIdPositionInInitialApicId
+#else
+ #define FinalDfltAssertCpuSrvcCoreIdPositionInInitialApicId DfltAssertCpuSrvcCoreIdPositionInInitialApicId
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcSaveFeatures
+ #define FinalDfltAssertCpuSrvcSaveFeatures OvrdDfltAssertCpuSrvcSaveFeatures
+#else
+ #define FinalDfltAssertCpuSrvcSaveFeatures DfltAssertCpuSrvcSaveFeatures
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcWriteFeatures
+ #define FinalDfltAssertCpuSrvcWriteFeatures OvrdDfltAssertCpuSrvcWriteFeatures
+#else
+ #define FinalDfltAssertCpuSrvcWriteFeatures DfltAssertCpuSrvcWriteFeatures
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcSetWarmResetFlag
+ #define FinalDfltAssertCpuSrvcSetWarmResetFlag OvrdDfltAssertCpuSrvcSetWarmResetFlag
+#else
+ #define FinalDfltAssertCpuSrvcSetWarmResetFlag DfltAssertCpuSrvcSetWarmResetFlag
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetWarmResetFlag
+ #define FinalDfltAssertCpuSrvcGetWarmResetFlag OvrdDfltAssertCpuSrvcGetWarmResetFlag
+#else
+ #define FinalDfltAssertCpuSrvcGetWarmResetFlag DfltAssertCpuSrvcGetWarmResetFlag
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetBrandString1
+ #define FinalDfltAssertCpuSrvcGetBrandString1 OvrdDfltAssertCpuSrvcGetBrandString1
+#else
+ #define FinalDfltAssertCpuSrvcGetBrandString1 DfltAssertCpuSrvcGetBrandString1
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetBrandString2
+ #define FinalDfltAssertCpuSrvcGetBrandString2 OvrdDfltAssertCpuSrvcGetBrandString2
+#else
+ #define FinalDfltAssertCpuSrvcGetBrandString2 DfltAssertCpuSrvcGetBrandString2
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetMicroCodePatchesStruct
+ #define FinalDfltAssertCpuSrvcGetMicroCodePatchesStruct OvrdDfltAssertCpuSrvcGetMicroCodePatchesStruct
+#else
+ #define FinalDfltAssertCpuSrvcGetMicroCodePatchesStruct DfltAssertCpuSrvcGetMicroCodePatchesStruct
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetMicrocodeEquivalenceTable
+ #define FinalDfltAssertCpuSrvcGetMicrocodeEquivalenceTable OvrdDfltAssertCpuSrvcGetMicrocodeEquivalenceTable
+#else
+ #define FinalDfltAssertCpuSrvcGetMicrocodeEquivalenceTable DfltAssertCpuSrvcGetMicrocodeEquivalenceTable
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetCacheInfo
+ #define FinalDfltAssertCpuSrvcGetCacheInfo OvrdDfltAssertCpuSrvcGetCacheInfo
+#else
+ #define FinalDfltAssertCpuSrvcGetCacheInfo DfltAssertCpuSrvcGetCacheInfo
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetSysPmTableStruct
+ #define FinalDfltAssertCpuSrvcGetSysPmTableStruct OvrdDfltAssertCpuSrvcGetSysPmTableStruct
+#else
+ #define FinalDfltAssertCpuSrvcGetSysPmTableStruct DfltAssertCpuSrvcGetSysPmTableStruct
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetWheaInitData
+ #define FinalDfltAssertCpuSrvcGetWheaInitData OvrdDfltAssertCpuSrvcGetWheaInitData
+#else
+ #define FinalDfltAssertCpuSrvcGetWheaInitData DfltAssertCpuSrvcGetWheaInitData
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetPlatformTypeSpecificInfo
+ #define FinalDfltAssertCpuSrvcGetPlatformTypeSpecificInfo OvrdDfltAssertCpuSrvcGetPlatformTypeSpecificInfo
+#else
+ #define FinalDfltAssertCpuSrvcGetPlatformTypeSpecificInfo DfltAssertCpuSrvcGetPlatformTypeSpecificInfo
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcIsNbPstateEnabled
+ #define FinalDfltAssertCpuSrvcIsNbPstateEnabled OvrdDfltAssertCpuSrvcIsNbPstateEnabled
+#else
+ #define FinalDfltAssertCpuSrvcIsNbPstateEnabled DfltAssertCpuSrvcIsNbPstateEnabled
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcNextLinkHasHtPhyFeats
+ #define FinalDfltAssertCpuSrvcNextLinkHasHtPhyFeats OvrdDfltAssertCpuSrvcNextLinkHasHtPhyFeats
+#else
+ #define FinalDfltAssertCpuSrvcNextLinkHasHtPhyFeats DfltAssertCpuSrvcNextLinkHasHtPhyFeats
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcSetHtPhyRegister
+ #define FinalDfltAssertCpuSrvcSetHtPhyRegister OvrdDfltAssertCpuSrvcSetHtPhyRegister
+#else
+ #define FinalDfltAssertCpuSrvcSetHtPhyRegister DfltAssertCpuSrvcSetHtPhyRegister
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetNextHtLinkFeatures
+ #define FinalDfltAssertCpuSrvcGetNextHtLinkFeatures OvrdDfltAssertCpuSrvcGetNextHtLinkFeatures
+#else
+ #define FinalDfltAssertCpuSrvcGetNextHtLinkFeatures DfltAssertCpuSrvcGetNextHtLinkFeatures
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcRegisterTableList
+ #define FinalDfltAssertCpuSrvcRegisterTableList OvrdDfltAssertCpuSrvcRegisterTableList
+#else
+ #define FinalDfltAssertCpuSrvcRegisterTableList DfltAssertCpuSrvcRegisterTableList
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcTableEntryTypeDescriptors
+ #define FinalDfltAssertCpuSrvcTableEntryTypeDescriptors OvrdDfltAssertCpuSrvcTableEntryTypeDescriptors
+#else
+ #define FinalDfltAssertCpuSrvcTableEntryTypeDescriptors DfltAssertCpuSrvcTableEntryTypeDescriptors
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcPackageLinkMap
+ #define FinalDfltAssertCpuSrvcPackageLinkMap OvrdDfltAssertCpuSrvcPackageLinkMap
+#else
+ #define FinalDfltAssertCpuSrvcPackageLinkMap DfltAssertCpuSrvcPackageLinkMap
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcComputeUnitMap
+ #define FinalDfltAssertCpuSrvcComputeUnitMap OvrdDfltAssertCpuSrvcComputeUnitMap
+#else
+ #define FinalDfltAssertCpuSrvcComputeUnitMap DfltAssertCpuSrvcComputeUnitMap
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcInitCacheDisabled
+ #define FinalDfltAssertCpuSrvcInitCacheDisabled OvrdDfltAssertCpuSrvcInitCacheDisabled
+#else
+ #define FinalDfltAssertCpuSrvcInitCacheDisabled DfltAssertCpuSrvcInitCacheDisabled
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+ #define FinalDfltAssertCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable OvrdDfltAssertCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#else
+ #define FinalDfltAssertCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable DfltAssertCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+ #define FinalDfltAssertCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable OvrdDfltAssertCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#else
+ #define FinalDfltAssertCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable DfltAssertCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#endif
+
+#ifdef OvrdDfltAssertCpuSrvcPatchLoaderIsSharedByCU
+ #define FinalDfltAssertCpuSrvcPatchLoaderIsSharedByCU OvrdDfltAssertCpuSrvcPatchLoaderIsSharedByCU
+#else
+ #define FinalDfltAssertCpuSrvcPatchLoaderIsSharedByCU DfltAssertCpuSrvcPatchLoaderIsSharedByCU
+#endif
+
+//
+// Handle override definitions on DfltCpuSrvc<ServiceName>
+//
+
+#ifdef OvrdDfltCpuSrvcRevision
+ #define FinalDfltCpuSrvcRevision OvrdDfltCpuSrvcRevision
+#else
+ #define FinalDfltCpuSrvcRevision DfltCpuSrvcRevision
+#endif
+
+#ifdef OvrdDfltCpuSrvcDisablePstate
+ #define FinalDfltCpuSrvcDisablePstate OvrdDfltCpuSrvcDisablePstate
+#else
+ #define FinalDfltCpuSrvcDisablePstate DfltCpuSrvcDisablePstate
+#endif
+
+#ifdef OvrdDfltCpuSrvcTransitionPstate
+ #define FinalDfltCpuSrvcTransitionPstate OvrdDfltCpuSrvcTransitionPstate
+#else
+ #define FinalDfltCpuSrvcTransitionPstate DfltCpuSrvcTransitionPstate
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetProcIddMax
+ #define FinalDfltCpuSrvcGetProcIddMax OvrdDfltCpuSrvcGetProcIddMax
+#else
+ #define FinalDfltCpuSrvcGetProcIddMax DfltCpuSrvcGetProcIddMax
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetTscRate
+ #define FinalDfltCpuSrvcGetTscRate OvrdDfltCpuSrvcGetTscRate
+#else
+ #define FinalDfltCpuSrvcGetTscRate DfltCpuSrvcGetTscRate
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetCurrentNbFrequency
+ #define FinalDfltCpuSrvcGetCurrentNbFrequency OvrdDfltCpuSrvcGetCurrentNbFrequency
+#else
+ #define FinalDfltCpuSrvcGetCurrentNbFrequency DfltCpuSrvcGetCurrentNbFrequency
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetMinMaxNbFrequency
+ #define FinalDfltCpuSrvcGetMinMaxNbFrequency OvrdDfltCpuSrvcGetMinMaxNbFrequency
+#else
+ #define FinalDfltCpuSrvcGetMinMaxNbFrequency DfltCpuSrvcGetMinMaxNbFrequency
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetNbPstateInfo
+ #define FinalDfltCpuSrvcGetNbPstateInfo OvrdDfltCpuSrvcGetNbPstateInfo
+#else
+ #define FinalDfltCpuSrvcGetNbPstateInfo DfltCpuSrvcGetNbPstateInfo
+#endif
+
+#ifdef OvrdDfltCpuSrvcIsNbCofInitNeeded
+ #define FinalDfltCpuSrvcIsNbCofInitNeeded OvrdDfltCpuSrvcIsNbCofInitNeeded
+#else
+ #define FinalDfltCpuSrvcIsNbCofInitNeeded DfltCpuSrvcIsNbCofInitNeeded
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetNbIddMax
+ #define FinalDfltCpuSrvcGetNbIddMax OvrdDfltCpuSrvcGetNbIddMax
+#else
+ #define FinalDfltCpuSrvcGetNbIddMax DfltCpuSrvcGetNbIddMax
+#endif
+
+#ifdef OvrdDfltCpuSrvcLaunchApCore
+ #define FinalDfltCpuSrvcLaunchApCore OvrdDfltCpuSrvcLaunchApCore
+#else
+ #define FinalDfltCpuSrvcLaunchApCore DfltCpuSrvcLaunchApCore
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetNumberOfPhysicalCores
+ #define FinalDfltCpuSrvcGetNumberOfPhysicalCores OvrdDfltCpuSrvcGetNumberOfPhysicalCores
+#else
+ #define FinalDfltCpuSrvcGetNumberOfPhysicalCores DfltCpuSrvcGetNumberOfPhysicalCores
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetApMailboxFromHardware
+ #define FinalDfltCpuSrvcGetApMailboxFromHardware OvrdDfltCpuSrvcGetApMailboxFromHardware
+#else
+ #define FinalDfltCpuSrvcGetApMailboxFromHardware DfltCpuSrvcGetApMailboxFromHardware
+#endif
+
+#ifdef OvrdDfltCpuSrvcSetApCoreNumber
+ #define FinalDfltCpuSrvcSetApCoreNumber OvrdDfltCpuSrvcSetApCoreNumber
+#else
+ #define FinalDfltCpuSrvcSetApCoreNumber DfltCpuSrvcSetApCoreNumber
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetApCoreNumber
+ #define FinalDfltCpuSrvcGetApCoreNumber OvrdDfltCpuSrvcGetApCoreNumber
+#else
+ #define FinalDfltCpuSrvcGetApCoreNumber DfltCpuSrvcGetApCoreNumber
+#endif
+
+#ifdef OvrdDfltCpuSrvcTransferApCoreNumber
+ #define FinalDfltCpuSrvcTransferApCoreNumber OvrdDfltCpuSrvcTransferApCoreNumber
+#else
+ #define FinalDfltCpuSrvcTransferApCoreNumber DfltCpuSrvcTransferApCoreNumber
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetStoredNodeNumber
+ #define FinalDfltCpuSrvcGetStoredNodeNumber OvrdDfltCpuSrvcGetStoredNodeNumber
+#else
+ #define FinalDfltCpuSrvcGetStoredNodeNumber DfltCpuSrvcGetStoredNodeNumber
+#endif
+
+#ifdef OvrdDfltCpuSrvcCoreIdPositionInInitialApicId
+ #define FinalDfltCpuSrvcCoreIdPositionInInitialApicId OvrdDfltCpuSrvcCoreIdPositionInInitialApicId
+#else
+ #define FinalDfltCpuSrvcCoreIdPositionInInitialApicId DfltCpuSrvcCoreIdPositionInInitialApicId
+#endif
+
+#ifdef OvrdDfltCpuSrvcSaveFeatures
+ #define FinalDfltCpuSrvcSaveFeatures OvrdDfltCpuSrvcSaveFeatures
+#else
+ #define FinalDfltCpuSrvcSaveFeatures DfltCpuSrvcSaveFeatures
+#endif
+
+#ifdef OvrdDfltCpuSrvcWriteFeatures
+ #define FinalDfltCpuSrvcWriteFeatures OvrdDfltCpuSrvcWriteFeatures
+#else
+ #define FinalDfltCpuSrvcWriteFeatures DfltCpuSrvcWriteFeatures
+#endif
+
+#ifdef OvrdDfltCpuSrvcSetWarmResetFlag
+ #define FinalDfltCpuSrvcSetWarmResetFlag OvrdDfltCpuSrvcSetWarmResetFlag
+#else
+ #define FinalDfltCpuSrvcSetWarmResetFlag DfltCpuSrvcSetWarmResetFlag
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetWarmResetFlag
+ #define FinalDfltCpuSrvcGetWarmResetFlag OvrdDfltCpuSrvcGetWarmResetFlag
+#else
+ #define FinalDfltCpuSrvcGetWarmResetFlag DfltCpuSrvcGetWarmResetFlag
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetBrandString1
+ #define FinalDfltCpuSrvcGetBrandString1 OvrdDfltCpuSrvcGetBrandString1
+#else
+ #define FinalDfltCpuSrvcGetBrandString1 DfltCpuSrvcGetBrandString1
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetBrandString2
+ #define FinalDfltCpuSrvcGetBrandString2 OvrdDfltCpuSrvcGetBrandString2
+#else
+ #define FinalDfltCpuSrvcGetBrandString2 DfltCpuSrvcGetBrandString2
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetMicroCodePatchesStruct
+ #define FinalDfltCpuSrvcGetMicroCodePatchesStruct OvrdDfltCpuSrvcGetMicroCodePatchesStruct
+#else
+ #define FinalDfltCpuSrvcGetMicroCodePatchesStruct DfltCpuSrvcGetMicroCodePatchesStruct
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetMicrocodeEquivalenceTable
+ #define FinalDfltCpuSrvcGetMicrocodeEquivalenceTable OvrdDfltCpuSrvcGetMicrocodeEquivalenceTable
+#else
+ #define FinalDfltCpuSrvcGetMicrocodeEquivalenceTable DfltCpuSrvcGetMicrocodeEquivalenceTable
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetCacheInfo
+ #define FinalDfltCpuSrvcGetCacheInfo OvrdDfltCpuSrvcGetCacheInfo
+#else
+ #define FinalDfltCpuSrvcGetCacheInfo DfltCpuSrvcGetCacheInfo
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetSysPmTableStruct
+ #define FinalDfltCpuSrvcGetSysPmTableStruct OvrdDfltCpuSrvcGetSysPmTableStruct
+#else
+ #define FinalDfltCpuSrvcGetSysPmTableStruct DfltCpuSrvcGetSysPmTableStruct
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetWheaInitData
+ #define FinalDfltCpuSrvcGetWheaInitData OvrdDfltCpuSrvcGetWheaInitData
+#else
+ #define FinalDfltCpuSrvcGetWheaInitData DfltCpuSrvcGetWheaInitData
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetPlatformTypeSpecificInfo
+ #define FinalDfltCpuSrvcGetPlatformTypeSpecificInfo OvrdDfltCpuSrvcGetPlatformTypeSpecificInfo
+#else
+ #define FinalDfltCpuSrvcGetPlatformTypeSpecificInfo DfltCpuSrvcGetPlatformTypeSpecificInfo
+#endif
+
+#ifdef OvrdDfltCpuSrvcIsNbPstateEnabled
+ #define FinalDfltCpuSrvcIsNbPstateEnabled OvrdDfltCpuSrvcIsNbPstateEnabled
+#else
+ #define FinalDfltCpuSrvcIsNbPstateEnabled DfltCpuSrvcIsNbPstateEnabled
+#endif
+
+#ifdef OvrdDfltCpuSrvcNextLinkHasHtPhyFeats
+ #define FinalDfltCpuSrvcNextLinkHasHtPhyFeats OvrdDfltCpuSrvcNextLinkHasHtPhyFeats
+#else
+ #define FinalDfltCpuSrvcNextLinkHasHtPhyFeats DfltCpuSrvcNextLinkHasHtPhyFeats
+#endif
+
+#ifdef OvrdDfltCpuSrvcSetHtPhyRegister
+ #define FinalDfltCpuSrvcSetHtPhyRegister OvrdDfltCpuSrvcSetHtPhyRegister
+#else
+ #define FinalDfltCpuSrvcSetHtPhyRegister DfltCpuSrvcSetHtPhyRegister
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetNextHtLinkFeatures
+ #define FinalDfltCpuSrvcGetNextHtLinkFeatures OvrdDfltCpuSrvcGetNextHtLinkFeatures
+#else
+ #define FinalDfltCpuSrvcGetNextHtLinkFeatures DfltCpuSrvcGetNextHtLinkFeatures
+#endif
+
+#ifdef OvrdDfltCpuSrvcRegisterTableList
+ #define FinalDfltCpuSrvcRegisterTableList OvrdDfltCpuSrvcRegisterTableList
+#else
+ #define FinalDfltCpuSrvcRegisterTableList DfltCpuSrvcRegisterTableList
+#endif
+
+#ifdef OvrdDfltCpuSrvcTableEntryTypeDescriptors
+ #define FinalDfltCpuSrvcTableEntryTypeDescriptors OvrdDfltCpuSrvcTableEntryTypeDescriptors
+#else
+ #define FinalDfltCpuSrvcTableEntryTypeDescriptors DfltCpuSrvcTableEntryTypeDescriptors
+#endif
+
+#ifdef OvrdDfltCpuSrvcPackageLinkMap
+ #define FinalDfltCpuSrvcPackageLinkMap OvrdDfltCpuSrvcPackageLinkMap
+#else
+ #define FinalDfltCpuSrvcPackageLinkMap DfltCpuSrvcPackageLinkMap
+#endif
+
+#ifdef OvrdDfltCpuSrvcComputeUnitMap
+ #define FinalDfltCpuSrvcComputeUnitMap OvrdDfltCpuSrvcComputeUnitMap
+#else
+ #define FinalDfltCpuSrvcComputeUnitMap DfltCpuSrvcComputeUnitMap
+#endif
+
+#ifdef OvrdDfltCpuSrvcInitCacheDisabled
+ #define FinalDfltCpuSrvcInitCacheDisabled OvrdDfltCpuSrvcInitCacheDisabled
+#else
+ #define FinalDfltCpuSrvcInitCacheDisabled DfltCpuSrvcInitCacheDisabled
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+ #define FinalDfltCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable OvrdDfltCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#else
+ #define FinalDfltCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable DfltCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#endif
+
+#ifdef OvrdDfltCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+ #define FinalDfltCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable OvrdDfltCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#else
+ #define FinalDfltCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable DfltCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#endif
+
+#ifdef OvrdDfltCpuSrvcPatchLoaderIsSharedByCU
+ #define FinalDfltCpuSrvcPatchLoaderIsSharedByCU OvrdDfltCpuSrvcPatchLoaderIsSharedByCU
+#else
+ #define FinalDfltCpuSrvcPatchLoaderIsSharedByCU DfltCpuSrvcPatchLoaderIsSharedByCU
+#endif
+
+
+//
+// Make final service definition with considerations of below:
+// 1. Common build config swich control
+// 2. Override service definition
+//
+
+// Member: (UINT16) Revision
+#ifdef CpuSrvcRevision
+ #define FinalCpuSrvcRevision CpuSrvcRevision
+#else
+ #define FinalCpuSrvcRevision FinalDfltCpuSrvcRevision
+#endif
+
+// Member: (PF_CPU_DISABLE_PSTATE) DisablePstate
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ #ifdef CpuSrvcDisablePstate
+ #define FinalCpuSrvcDisablePstate CpuSrvcDisablePstate
+ #ifndef EXTERN_FINALCPUSRVCDISABLEPSTATE
+ #define EXTERN_FINALCPUSRVCDISABLEPSTATE
+ extern F_CPU_DISABLE_PSTATE FinalCpuSrvcDisablePstate;
+ #endif
+ #else
+ #define FinalCpuSrvcDisablePstate FinalDfltCpuSrvcDisablePstate
+ #endif
+#else
+ #define FinalCpuSrvcDisablePstate FinalDfltAssertCpuSrvcDisablePstate
+#endif
+
+// Member: (PF_CPU_TRANSITION_PSTATE) TransitionPstate
+#if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ #ifdef CpuSrvcTransitionPstate
+ #define FinalCpuSrvcTransitionPstate CpuSrvcTransitionPstate
+ #ifndef EXTERN_FINALCPUSRVCTRANSITIONPSTATE
+ #define EXTERN_FINALCPUSRVCTRANSITIONPSTATE
+ extern F_CPU_TRANSITION_PSTATE FinalCpuSrvcTransitionPstate;
+ #endif
+ #else
+ #define FinalCpuSrvcTransitionPstate FinalDfltCpuSrvcTransitionPstate
+ #endif
+#else
+ #define FinalCpuSrvcTransitionPstate FinalDfltAssertCpuSrvcTransitionPstate
+#endif
+
+// Member: (PF_CPU_GET_IDD_MAX) GetProcIddMax
+#if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE)
+ #ifdef CpuSrvcGetProcIddMax
+ #define FinalCpuSrvcGetProcIddMax CpuSrvcGetProcIddMax
+ extern F_CPU_GET_IDD_MAX FinalCpuSrvcGetProcIddMax;
+ #else
+ #define FinalCpuSrvcGetProcIddMax FinalDfltCpuSrvcGetProcIddMax
+ #endif
+#else
+ #define FinalCpuSrvcGetProcIddMax FinalDfltAssertCpuSrvcGetProcIddMax
+#endif
+
+// Member: (PF_CPU_GET_TSC_RATE) GetTscRate
+#if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ #ifdef CpuSrvcGetTscRate
+ #define FinalCpuSrvcGetTscRate CpuSrvcGetTscRate
+ #ifndef EXTERN_FINALCPUSRVCGETTSCRATE
+ #define EXTERN_FINALCPUSRVCGETTSCRATE
+ extern F_CPU_GET_TSC_RATE FinalCpuSrvcGetTscRate;
+ #endif
+ #else
+ #define FinalCpuSrvcGetTscRate FinalDfltCpuSrvcGetTscRate
+ #endif
+#else
+ #define FinalCpuSrvcGetTscRate FinalDfltAssertCpuSrvcGetTscRate
+#endif
+
+// Member: (PF_CPU_GET_NB_FREQ) GetCurrentNbFrequency
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ #ifdef CpuSrvcGetCurrentNbFrequency
+ #define FinalCpuSrvcGetCurrentNbFrequency CpuSrvcGetCurrentNbFrequency
+ extern F_CPU_GET_NB_FREQ FinalCpuSrvcGetCurrentNbFrequency;
+ #else
+ #define FinalCpuSrvcGetCurrentNbFrequency FinalDfltCpuSrvcGetCurrentNbFrequency
+ #endif
+#else
+ #define FinalCpuSrvcGetCurrentNbFrequency FinalDfltAssertCpuSrvcGetCurrentNbFrequency
+#endif
+
+
+// Member: (PF_CPU_GET_MIN_MAX_NB_FREQ) GetMinMaxNbFrequency
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ #ifdef CpuSrvcGetMinMaxNbFrequency
+ #define FinalCpuSrvcGetMinMaxNbFrequency CpuSrvcGetMinMaxNbFrequency
+ extern F_CPU_GET_MIN_MAX_NB_FREQ FinalCpuSrvcGetMinMaxNbFrequency;
+ #else
+ #define FinalCpuSrvcGetMinMaxNbFrequency FinalDfltCpuSrvcGetMinMaxNbFrequency
+ #endif
+#else
+ #define FinalCpuSrvcGetMinMaxNbFrequency FinalDfltAssertCpuSrvcGetMinMaxNbFrequency
+#endif
+
+// Member: (PF_CPU_GET_NB_PSTATE_INFO) GetNbPstateInfo
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ #ifdef CpuSrvcGetNbPstateInfo
+ #define FinalCpuSrvcGetNbPstateInfo CpuSrvcGetNbPstateInfo
+ extern F_CPU_GET_NB_PSTATE_INFO FinalCpuSrvcGetNbPstateInfo;
+ #else
+ #define FinalCpuSrvcGetNbPstateInfo FinalDfltCpuSrvcGetNbPstateInfo
+ #endif
+#else
+ #define FinalCpuSrvcGetNbPstateInfo FinalDfltAssertCpuSrvcGetNbPstateInfo
+#endif
+
+// Member: (PF_CPU_IS_NBCOF_INIT_NEEDED) IsNbCofInitNeeded
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ #ifdef CpuSrvcIsNbCofInitNeeded
+ #define FinalCpuSrvcIsNbCofInitNeeded CpuSrvcIsNbCofInitNeeded
+ extern F_CPU_IS_NBCOF_INIT_NEEDED FinalCpuSrvcIsNbCofInitNeeded;
+ #else
+ #define FinalCpuSrvcIsNbCofInitNeeded FinalDfltCpuSrvcIsNbCofInitNeeded
+ #endif
+#else
+ #define FinalCpuSrvcIsNbCofInitNeeded FinalDfltAssertCpuSrvcIsNbCofInitNeeded
+#endif
+
+// Member: (PF_CPU_GET_NB_IDD_MAX) GetNbIddMax
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ #ifdef CpuSrvcGetNbIddMax
+ #define FinalCpuSrvcGetNbIddMax CpuSrvcGetNbIddMax
+ extern F_CPU_GET_NB_IDD_MAX FinalCpuSrvcGetNbIddMax;
+ #else
+ #define FinalCpuSrvcGetNbIddMax FinalDfltCpuSrvcGetNbIddMax
+ #endif
+#else
+ #define FinalCpuSrvcGetNbIddMax FinalDfltAssertCpuSrvcGetNbIddMax
+#endif
+
+// Member: (PF_CPU_AP_INITIAL_LAUNCH) LaunchApCore
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ #ifdef CpuSrvcLaunchApCore
+ #define FinalCpuSrvcLaunchApCore CpuSrvcLaunchApCore
+ #ifndef EXTERN_FINALCPUSRVCLAUNCHAPCORE
+ #define EXTERN_FINALCPUSRVCLAUNCHAPCORE
+ extern F_CPU_AP_INITIAL_LAUNCH FinalCpuSrvcLaunchApCore;
+ #endif
+ #else
+ #define FinalCpuSrvcLaunchApCore FinalDfltCpuSrvcLaunchApCore
+ #endif
+#else
+ #define FinalCpuSrvcLaunchApCore FinalDfltAssertCpuSrvcLaunchApCore
+#endif
+
+// Member:(PF_CPU_NUMBER_OF_PHYSICAL_CORES) GetNumberOfPhysicalCores
+#if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ #ifdef CpuSrvcGetNumberOfPhysicalCores
+ #define FinalCpuSrvcGetNumberOfPhysicalCores CpuSrvcGetNumberOfPhysicalCores
+ extern F_CPU_NUMBER_OF_PHYSICAL_CORES FinalCpuSrvcGetNumberOfPhysicalCores;
+ #else
+ #define FinalCpuSrvcGetNumberOfPhysicalCores FinalDfltCpuSrvcGetNumberOfPhysicalCores
+ #endif
+#else
+ #define FinalCpuSrvcGetNumberOfPhysicalCores FinalDfltAssertCpuSrvcGetNumberOfPhysicalCores
+#endif
+
+// Member: (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) GetApMailboxFromHardware
+#if (AGESA_ENTRY_INIT_RESET == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE)
+ #ifdef CpuSrvcGetApMailboxFromHardware
+ #define FinalCpuSrvcGetApMailboxFromHardware CpuSrvcGetApMailboxFromHardware
+ extern F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE FinalCpuSrvcGetApMailboxFromHardware;
+ #else
+ #define FinalCpuSrvcGetApMailboxFromHardware FinalDfltCpuSrvcGetApMailboxFromHardware
+ #endif
+#else
+ #define FinalCpuSrvcGetApMailboxFromHardware FinalDfltAssertCpuSrvcGetApMailboxFromHardware
+#endif
+
+// Member: (PF_CPU_SET_AP_CORE_NUMBER) SetApCoreNumber
+#if (AGESA_ENTRY_INIT_RESET == TRUE) || (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE)
+ #ifdef CpuSrvcSetApCoreNumber
+ #define FinalCpuSrvcSetApCoreNumber CpuSrvcSetApCoreNumber
+ extern F_CPU_SET_AP_CORE_NUMBER FinalCpuSrvcSetApCoreNumber;
+ #else
+ #define FinalCpuSrvcSetApCoreNumber FinalDfltCpuSrvcSetApCoreNumber
+ #endif
+#else
+ #define FinalCpuSrvcSetApCoreNumber FinalDfltAssertCpuSrvcSetApCoreNumber
+#endif
+
+// Member: (PF_CPU_GET_AP_CORE_NUMBER) GetApCoreNumber
+#if (AGESA_ENTRY_INIT_RESET == TRUE) || (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE) || \
+ (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ #ifdef CpuSrvcGetApCoreNumber
+ #define FinalCpuSrvcGetApCoreNumber CpuSrvcGetApCoreNumber
+ extern F_CPU_GET_AP_CORE_NUMBER FinalCpuSrvcGetApCoreNumber;
+ #else
+ #define FinalCpuSrvcGetApCoreNumber FinalDfltCpuSrvcGetApCoreNumber
+ #endif
+#else
+ #define FinalCpuSrvcGetApCoreNumber FinalDfltAssertCpuSrvcGetApCoreNumber
+#endif
+
+// Member: (PF_CPU_TRANSFER_AP_CORE_NUMBER) TransferApCoreNumber
+#if (AGESA_ENTRY_INIT_RESET == TRUE) || (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE)
+ #ifdef CpuSrvcTransferApCoreNumber
+ #define FinalCpuSrvcTransferApCoreNumber CpuSrvcTransferApCoreNumber
+ extern F_CPU_TRANSFER_AP_CORE_NUMBER FinalCpuSrvcTransferApCoreNumber;
+ #else
+ #define FinalCpuSrvcTransferApCoreNumber FinalDfltCpuSrvcTransferApCoreNumber
+ #endif
+#else
+ #define FinalCpuSrvcTransferApCoreNumber FinalDfltAssertCpuSrvcTransferApCoreNumber
+#endif
+
+// Member: (PF_CPU_GET_STORED_NODE_NUMBER) GetStoredNodeNumber
+#if (AGESA_ENTRY_INIT_RESET == TRUE) || (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE) || \
+ (AGESA_ENTRY_INIT_ENV == TRUE) || (AGESA_ENTRY_INIT_MID == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || \
+ (AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE) || \
+ (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE) || (AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE)
+ #ifdef CpuSrvcGetStoredNodeNumber
+ #define FinalCpuSrvcGetStoredNodeNumber CpuSrvcGetStoredNodeNumber
+ extern F_CPU_GET_STORED_NODE_NUMBER FinalCpuSrvcGetStoredNodeNumber;
+ #else
+ #define FinalCpuSrvcGetStoredNodeNumber FinalDfltCpuSrvcGetStoredNodeNumber
+ #endif
+#else
+ #define FinalCpuSrvcGetStoredNodeNumber FinalDfltAssertCpuSrvcGetStoredNodeNumber
+#endif
+
+// Member: (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CoreIdPositionInInitialApicId
+#if (AGESA_ENTRY_INIT_RESET == TRUE) || (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE) || \
+ (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE)
+ #ifdef CpuSrvcCoreIdPositionInInitialApicId
+ #define FinalCpuSrvcCoreIdPositionInInitialApicId CpuSrvcCoreIdPositionInInitialApicId
+ #ifndef EXTERN_FINALCPUSRVCCOREIDPOSITIONININITIALAPICID
+ #define EXTERN_FINALCPUSRVCCOREIDPOSITIONININITIALAPICID
+ extern F_CORE_ID_POSITION_IN_INITIAL_APIC_ID FinalCpuSrvcCoreIdPositionInInitialApicId;
+ #endif
+ #else
+ #define FinalCpuSrvcCoreIdPositionInInitialApicId FinalDfltCpuSrvcoreIdPositionInInitialApicId
+ #endif
+#else
+ #define FinalCpuSrvcCoreIdPositionInInitialApicId FinalDfltAssertCpuSrvcCoreIdPositionInInitialApicId
+#endif
+
+// Member: (PF_CPU_SAVE_FEATURES) SaveFeatures
+#if (AGESA_ENTRY_INIT_POST == TRUE)
+ #ifdef CpuSrvcSaveFeatures
+ #define FinalCpuSrvcSaveFeatures CpuSrvcSaveFeatures
+ extern F_CPU_SAVE_FEATURES FinalCpuSrvcSaveFeatures;
+ #else
+ #define FinalCpuSrvcSaveFeatures FinalDfltCpuSrvcSaveFeatures
+ #endif
+#else
+ #define FinalCpuSrvcSaveFeatures FinalDfltAssertCpuSrvcSaveFeatures
+#endif
+
+// Member: (PF_CPU_WRITE_FEATURES) WriteFeatures
+#if (AGESA_ENTRY_INIT_POST == TRUE)
+ #ifdef CpuSrvcWriteFeatures
+ #define FinalCpuSrvcWriteFeatures CpuSrvcWriteFeatures
+ extern F_CPU_WRITE_FEATURES FinalCpuSrvcWriteFeatures;
+ #else
+ #define FinalCpuSrvcWriteFeatures FinalDfltCpuSrvcWriteFeatures
+ #endif
+#else
+ #define FinalCpuSrvcWriteFeatures FinalDfltAssertCpuSrvcWriteFeatures
+#endif
+
+// Member: (PF_CPU_SET_WARM_RESET_FLAG) SetWarmResetFlag
+#if (AGESA_ENTRY_INIT_RESET == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE)
+ #ifdef CpuSrvcSetWarmResetFlag
+ #define FinalCpuSrvcSetWarmResetFlag CpuSrvcSetWarmResetFlag
+ #ifndef EXTERN_FINALCPUSRVCSETWARMRESETFLAG
+ #define EXTERN_FINALCPUSRVCSETWARMRESETFLAG
+ extern F_CPU_SET_WARM_RESET_FLAG FinalCpuSrvcSetWarmResetFlag;
+ #endif
+ #else
+ #define FinalCpuSrvcSetWarmResetFlag FinalDfltCpuSrvcSetWarmResetFlag
+ #endif
+#else
+ #define FinalCpuSrvcSetWarmResetFlag FinalDfltAssertCpuSrvcSetWarmResetFlag
+#endif
+
+// Member: (PF_CPU_GET_WARM_RESET_FLAG) GetWarmResetFlag
+#if (AGESA_ENTRY_INIT_RESET == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE)
+ #ifdef CpuSrvcGetWarmResetFlag
+ #define FinalCpuSrvcGetWarmResetFlag CpuSrvcGetWarmResetFlag
+ #ifndef EXTERN_FINALCPUSRVCGETWARMRESETFLAG
+ #define EXTERN_FINALCPUSRVCGETWARMRESETFLAG
+ extern F_CPU_GET_WARM_RESET_FLAG FinalCpuSrvcGetWarmResetFlag;
+ #endif
+ #else
+ #define FinalCpuSrvcGetWarmResetFlag FinalDfltCpuSrvcGetWarmResetFlag
+ #endif
+#else
+ #define FinalCpuSrvcGetWarmResetFlag FinalDfltAssertCpuSrvcGetWarmResetFlag
+#endif
+
+// Member: (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetBrandString1
+#if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ #ifdef CpuSrvcGetBrandString1
+ #define FinalCpuSrvcGetBrandString1 CpuSrvcGetBrandString1
+ extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY FinalCpuSrvcGetBrandString1;
+ #else
+ #define FinalCpuSrvcGetBrandString1 FinalDfltCpuSrvcGetBrandString1
+ #endif
+#else
+ #define FinalCpuSrvcGetBrandString1 FinalDfltAssertCpuSrvcGetBrandString1
+#endif
+
+// Member: (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetBrandString2
+#if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ #ifdef CpuSrvcGetBrandString2
+ #define FinalCpuSrvcGetBrandString2 CpuSrvcGetBrandString2
+ extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY FinalCpuSrvcGetBrandString2;
+ #else
+ #define FinalCpuSrvcGetBrandString2 FinalDfltCpuSrvcGetBrandString2
+ #endif
+#else
+ #define FinalCpuSrvcGetBrandString2 FinalDfltAssertCpuSrvcGetBrandString2
+#endif
+
+// Member: (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetMicroCodePatchesStruct
+#if (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE)
+ #ifdef CpuSrvcGetMicroCodePatchesStruct
+ #define FinalCpuSrvcGetMicroCodePatchesStruct CpuSrvcGetMicroCodePatchesStruct
+ #ifndef EXTERN_FINALCPUSRVCGETMICROCODEPATCHESSTRUCT
+ #define EXTERN_FINALCPUSRVCGETMICROCODEPATCHESSTRUCT
+ extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY FinalCpuSrvcGetMicroCodePatchesStruct;
+ #endif
+ #else
+ #define FinalCpuSrvcGetMicroCodePatchesStruct FinalDfltCpuSrvcGetMicroCodePatchesStruct
+ #endif
+#else
+ #define FinalCpuSrvcGetMicroCodePatchesStruct FinalDfltAssertCpuSrvcGetMicroCodePatchesStruct
+#endif
+
+// Member: (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetMicrocodeEquivalenceTable
+#if (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE)
+ #ifdef CpuSrvcGetMicrocodeEquivalenceTable
+ #define FinalCpuSrvcGetMicrocodeEquivalenceTable CpuSrvcGetMicrocodeEquivalenceTable
+ #ifndef EXTERN_FINALCPUSRVCGETMICROCODEEQUIVALENCETABLE
+ #define EXTERN_FINALCPUSRVCGETMICROCODEEQUIVALENCETABLE
+ extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY FinalCpuSrvcGetMicrocodeEquivalenceTable;
+ #endif
+ #else
+ #define FinalCpuSrvcGetMicrocodeEquivalenceTable FinalDfltCpuSrvcGetMicrocodeEquivalenceTable
+ #endif
+#else
+ #define FinalCpuSrvcGetMicrocodeEquivalenceTable FinalDfltAssertCpuSrvcGetMicrocodeEquivalenceTable
+#endif
+
+// Member: (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetCacheInfo
+#if (AGESA_ENTRY_INIT_RESET == TRUE) || (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE)
+ #ifdef CpuSrvcGetCacheInfo
+ #define FinalCpuSrvcGetCacheInfo CpuSrvcGetCacheInfo
+ extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY FinalCpuSrvcGetCacheInfo;
+ #else
+ #define FinalCpuSrvcGetCacheInfo FinalDfltCpuSrvcGetCacheInfo
+ #endif
+#else
+ #define FinalCpuSrvcGetCacheInfo FinalDfltAssertCpuSrvcGetCacheInfo
+#endif
+
+// Member: (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetSysPmTableStruct
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ #ifdef CpuSrvcGetSysPmTableStruct
+ #define FinalCpuSrvcGetSysPmTableStruct CpuSrvcGetSysPmTableStruct
+ extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY FinalCpuSrvcGetSysPmTableStruct;
+ #else
+ #define FinalCpuSrvcGetSysPmTableStruct FinalDfltCpuSrvcGetSysPmTableStruct
+ #endif
+#else
+ #define FinalCpuSrvcGetSysPmTableStruct FinalDfltAssertCpuSrvcGetSysPmTableStruct
+#endif
+
+// Member: (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetWheaInitData
+#if AGESA_ENTRY_INIT_LATE == TRUE
+ #ifdef CpuSrvcGetWheaInitData
+ #define FinalCpuSrvcGetWheaInitData CpuSrvcGetWheaInitData
+ #ifndef EXTERN_FINALCPUSRVCGETWHEAINITDATA
+ #define EXTERN_FINALCPUSRVCGETWHEAINITDATA
+ extern F_CPU_GET_FAMILY_SPECIFIC_ARRAY FinalCpuSrvcGetWheaInitData;
+ #endif
+ #else
+ #define FinalCpuSrvcGetWheaInitData FinalDfltCpuSrvcGetWheaInitData
+ #endif
+#else
+ #define FinalCpuSrvcGetWheaInitData FinalDfltAssertCpuSrvcGetWheaInitData
+#endif
+
+// Member: (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) GetPlatformTypeSpecificInfo
+#if (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ #ifdef CpuSrvcGetPlatformTypeSpecificInfo
+ #define FinalCpuSrvcGetPlatformTypeSpecificInfo CpuSrvcGetPlatformTypeSpecificInfo
+ extern F_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO FinalCpuSrvcGetPlatformTypeSpecificInfo;
+ #else
+ #define FinalCpuSrvcGetPlatformTypeSpecificInfo FinalDfltCpuSrvcGetPlatformTypeSpecificInfo
+ #endif
+#else
+ #define FinalCpuSrvcGetPlatformTypeSpecificInfo FinalDfltAssertCpuSrvcGetPlatformTypeSpecificInfo
+#endif
+
+// Member: (PF_IS_NB_PSTATE_ENABLED) IsNbPstateEnabled
+#if (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE)
+ #ifdef CpuSrvcIsNbPstateEnabled
+ #define FinalCpuSrvcIsNbPstateEnabled CpuSrvcIsNbPstateEnabled
+ extern F_IS_NB_PSTATE_ENABLED FinalCpuSrvcIsNbPstateEnabled;
+ #else
+ #define FinalCpuSrvcIsNbPstateEnabled FinalDfltCpuSrvcIsNbPstateEnabled
+ #endif
+#else
+ #define FinalCpuSrvcIsNbPstateEnabled FinalDfltAssertCpuSrvcIsNbPstateEnabled
+#endif
+
+// Member: (PF_NEXT_LINK_HAS_HTFPY_FEATS) NextLinkHasHtPhyFeats
+#if BASE_FAMILY_HT_PCI == TRUE
+ #ifdef CpuSrvcNextLinkHasHtPhyFeats
+ #define FinalCpuSrvcNextLinkHasHtPhyFeats CpuSrvcNextLinkHasHtPhyFeats
+ extern F_NEXT_LINK_HAS_HTPHY_FEATS FinalCpuSrvcNextLinkHasHtPhyFeats;
+ #else
+ #define FinalCpuSrvcNextLinkHasHtPhyFeats FinalDfltCpuSrvcNextLinkHasHtPhyFeats
+ #endif
+#else
+ #define FinalCpuSrvcNextLinkHasHtPhyFeats FinalDfltAssertCpuSrvcNextLinkHasHtPhyFeats
+#endif
+
+// Member: (PF_SET_HT_PHY_REGISTER) SetHtPhyRegister
+#if BASE_FAMILY_HT_PCI == TRUE
+ #ifdef CpuSrvcSetHtPhyRegister
+ #define FinalCpuSrvcSetHtPhyRegister CpuSrvcSetHtPhyRegister
+ extern F_SET_HT_PHY_REGISTER FinalCpuSrvcSetHtPhyRegister;
+ #else
+ #define FinalCpuSrvcSetHtPhyRegister FinalDfltCpuSrvcSetHtPhyRegister
+ #endif
+#else
+ #define FinalCpuSrvcSetHtPhyRegister FinalDfltAssertCpuSrvcSetHtPhyRegister
+#endif
+
+// Member: (PF_GET_NEXT_HT_LINK_FEATURES) GetNextHtLinkFeatures
+#if BASE_FAMILY_PCI == TRUE
+ #ifdef CpuSrvcGetNextHtLinkFeatures
+ #define FinalCpuSrvcGetNextHtLinkFeatures CpuSrvcGetNextHtLinkFeatures
+ extern F_GET_NEXT_HT_LINK_FEATURES FinalCpuSrvcGetNextHtLinkFeatures;
+ #else
+ #define FinalCpuSrvcGetNextHtLinkFeatures FinalDfltCpuSrvcGetNextHtLinkFeatures
+ #endif
+#else
+ #define FinalCpuSrvcGetNextHtLinkFeatures FinalDfltAssertCpuSrvcGetNextHtLinkFeatures
+#endif
+
+// Member: (REGISTER_TABLE **) RegisterTableList
+#if USES_REGISTER_TABLES == TRUE // (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE)
+ #ifdef CpuSrvcRegisterTableList
+ #define FinalCpuSrvcRegisterTableList CpuSrvcRegisterTableList
+ #else
+ #define FinalCpuSrvcRegisterTableList FinalDfltCpuSrvcRegisterTableList
+ #endif
+#else
+ #define FinalCpuSrvcRegisterTableList FinalDfltAssertCpuSrvcRegisterTableList
+#endif
+
+// Member: (TABLE_ENTRY_TYPE_DESCRIPTOR *) TableEntryTypeDescriptors
+#if USES_REGISTER_TABLES == TRUE // (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE)
+ #ifdef CpuSrvcTableEntryTypeDescriptors
+ #define FinalCpuSrvcTableEntryTypeDescriptors CpuSrvcTableEntryTypeDescriptors
+ #else
+ #define FinalCpuSrvcTableEntryTypeDescriptors FinalDfltCpuSrvcTableEntryTypeDescriptors
+ #endif
+#else
+ #define FinalCpuSrvcTableEntryTypeDescriptors FinalDfltAssertCpuSrvcTableEntryTypeDescriptors
+#endif
+
+// Member: (PACKAGE_HTLINK_MAP) PackageLinkMap
+#if MODEL_SPECIFIC_HT_PCI == TRUE
+ #ifdef CpuSrvcPackageLinkMap
+ #define FinalCpuSrvcPackageLinkMap CpuSrvcPackageLinkMap
+ #else
+ #define FinalCpuSrvcPackageLinkMap FinalDfltCpuSrvcPackageLinkMap
+ #endif
+#else
+ #define FinalCpuSrvcPackageLinkMap FinalDfltAssertCpuSrvcPackageLinkMap
+#endif
+
+// Member: (COMPUTE_UNIT_MAP *) ComputeUnitMap
+#ifdef CpuSrvcComputeUnitMap
+ #define FinalCpuSrvcComputeUnitMap CpuSrvcComputeUnitMap
+#else
+ #define FinalCpuSrvcComputeUnitMap FinalDfltCpuSrvcComputeUnitMap
+#endif
+
+// Member: (FAMILY_CACHE_INIT_POLICY) InitCacheDisabled
+#ifdef CpuSrvcInitCacheDisabled
+ #define FinalCpuSrvcInitCacheDisabled CpuSrvcInitCacheDisabled
+#else
+ #define FinalCpuSrvcInitCacheDisabled FinalDfltCpuSrvcInitCacheDisabled
+#endif
+
+// Member: (PF_GET_EARLY_INIT_TABLE) GetEarlyInitBeforeApLaunchOnCoreTable
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ #ifdef CpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+ #define FinalCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable CpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+ extern F_GET_EARLY_INIT_TABLE FinalCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable;
+ #else
+ #define FinalCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable FinalDfltCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+ #endif
+#else
+ #define FinalCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable FinalDfltAssertCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#endif
+
+// Member: (PF_GET_EARLY_INIT_TABLE) GetEarlyInitAfterApLaunchOnCoreTable
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ #ifdef CpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+ #define FinalCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable CpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+ extern F_GET_EARLY_INIT_TABLE FinalCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable;
+ #else
+ #define FinalCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable FinalDfltCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+ #endif
+#else
+ #define FinalCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable FinalDfltAssertCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#endif
+
+// Member: (BOOLEAN) PatchLoaderIsSharedByCU
+#if (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE)
+ #ifdef CpuSrvcPatchLoaderIsSharedByCU
+ #define FinalCpuSrvcPatchLoaderIsSharedByCU CpuSrvcPatchLoaderIsSharedByCU
+ #else
+ #define FinalCpuSrvcPatchLoaderIsSharedByCU FinalDfltCpuSrvcPatchLoaderIsSharedByCU
+ #endif
+#else
+ #define FinalCpuSrvcPatchLoaderIsSharedByCU FinalDfltAssertCpuSrvcPatchLoaderIsSharedByCU
+#endif
+
+//
+// NOTE: All CPU family specific service members should be all defined now.
+//
+
+//
+// Define CPU specific services installation macro
+//
+#ifndef _INSTALL_CPU_SPECIFIC_SERVICES_TABLE_NAME_
+ #define _INSTALL_CPU_SPECIFIC_SERVICES_TABLE_NAME_
+
+ #define INSTALL_CPU_SPECIFIC_SERVICES_TABLE_NAME(MacroPrefix, TableName) \
+ CONST CPU_SPECIFIC_SERVICES ROMDATA TableName = \
+ { \
+ MacroPrefix##CpuSrvcRevision, \
+ MacroPrefix##CpuSrvcDisablePstate, \
+ MacroPrefix##CpuSrvcTransitionPstate, \
+ MacroPrefix##CpuSrvcGetProcIddMax, \
+ MacroPrefix##CpuSrvcGetTscRate, \
+ MacroPrefix##CpuSrvcGetCurrentNbFrequency, \
+ MacroPrefix##CpuSrvcGetMinMaxNbFrequency, \
+ MacroPrefix##CpuSrvcGetNbPstateInfo, \
+ MacroPrefix##CpuSrvcIsNbCofInitNeeded, \
+ MacroPrefix##CpuSrvcGetNbIddMax, \
+ MacroPrefix##CpuSrvcLaunchApCore, \
+ MacroPrefix##CpuSrvcGetNumberOfPhysicalCores, \
+ MacroPrefix##CpuSrvcGetApMailboxFromHardware, \
+ MacroPrefix##CpuSrvcSetApCoreNumber, \
+ MacroPrefix##CpuSrvcGetApCoreNumber, \
+ MacroPrefix##CpuSrvcTransferApCoreNumber, \
+ MacroPrefix##CpuSrvcGetStoredNodeNumber, \
+ MacroPrefix##CpuSrvcCoreIdPositionInInitialApicId, \
+ MacroPrefix##CpuSrvcSaveFeatures, \
+ MacroPrefix##CpuSrvcWriteFeatures, \
+ MacroPrefix##CpuSrvcSetWarmResetFlag, \
+ MacroPrefix##CpuSrvcGetWarmResetFlag, \
+ MacroPrefix##CpuSrvcGetBrandString1, \
+ MacroPrefix##CpuSrvcGetBrandString2, \
+ MacroPrefix##CpuSrvcGetMicroCodePatchesStruct, \
+ MacroPrefix##CpuSrvcGetMicrocodeEquivalenceTable, \
+ MacroPrefix##CpuSrvcGetCacheInfo, \
+ MacroPrefix##CpuSrvcGetSysPmTableStruct, \
+ MacroPrefix##CpuSrvcGetWheaInitData, \
+ MacroPrefix##CpuSrvcGetPlatformTypeSpecificInfo, \
+ MacroPrefix##CpuSrvcIsNbPstateEnabled, \
+ MacroPrefix##CpuSrvcNextLinkHasHtPhyFeats, \
+ MacroPrefix##CpuSrvcSetHtPhyRegister, \
+ MacroPrefix##CpuSrvcGetNextHtLinkFeatures, \
+ MacroPrefix##CpuSrvcRegisterTableList, \
+ MacroPrefix##CpuSrvcTableEntryTypeDescriptors, \
+ MacroPrefix##CpuSrvcPackageLinkMap, \
+ MacroPrefix##CpuSrvcComputeUnitMap, \
+ MacroPrefix##CpuSrvcInitCacheDisabled, \
+ MacroPrefix##CpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable, \
+ MacroPrefix##CpuSrvcGetEarlyInitAfterApLaunchOnCoreTable, \
+ MacroPrefix##CpuSrvcPatchLoaderIsSharedByCU \
+ }
+#endif // _INSTALL_CPU_SPECIFIC_SERVICES_TABLE_NAME_
+
+#ifndef _INSTALL_CPU_SPECIFIC_SERVICES_TABLE_
+ #define _INSTALL_CPU_SPECIFIC_SERVICES_TABLE_
+
+ #define INSTALL_CPU_SPECIFIC_SERVICES_TABLE(TableName) \
+ INSTALL_CPU_SPECIFIC_SERVICES_TABLE_NAME (Final, TableName)
+#endif // _INSTALL_CPU_SPECIFIC_SERVICES_TABLE_
+
+//
+// Message out the final table definitions
+//
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuSpecificServicesInstallReset.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuSpecificServicesInstallReset.h
new file mode 100644
index 0000000..923b621
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionCpuSpecificServicesInstallReset.h
@@ -0,0 +1,545 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of CPU specific services support
+ *
+ * This file resets and generates default services of CPU specific services.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Include
+ * @e \$Revision: 85962 $ @e \$Date: 2013-01-14 20:12:29 -0600 (Mon, 14 Jan 2013) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+//
+// Undefine service table name
+//
+#undef CpuSrvcTableName
+
+//
+// Definitions types of a service to undefine
+//
+// * CpuSrvc<ServiceName>
+// * DfltCpuSrvc<ServiceName>
+// * DfltAssertCpuSrvc<ServiceName>
+// * OvrdDfltCpuSrvc<ServiceName>
+// * OvrdDfltAssertCpuSrvc<ServiceName>
+// * FinalDfltCpuSrvc<ServiceName>
+// * FinalDfltAssertCpuSrvc<ServiceName>
+// * FinalCpuSrvc<ServiceName>
+//
+
+//
+// Reset default services definitions
+//
+#undef CpuSrvcRevision
+#undef CpuSrvcDisablePstate
+#undef CpuSrvcTransitionPstate
+#undef CpuSrvcGetProcIddMax
+#undef CpuSrvcGetTscRate
+#undef CpuSrvcGetCurrentNbFrequency
+#undef CpuSrvcGetMinMaxNbFrequency
+#undef CpuSrvcGetNbPstateInfo
+#undef CpuSrvcIsNbCofInitNeeded
+#undef CpuSrvcGetNbIddMax
+#undef CpuSrvcLaunchApCore
+#undef CpuSrvcGetNumberOfPhysicalCores
+#undef CpuSrvcGetApMailboxFromHardware
+#undef CpuSrvcSetApCoreNumber
+#undef CpuSrvcGetApCoreNumber
+#undef CpuSrvcTransferApCoreNumber
+#undef CpuSrvcGetStoredNodeNumber
+#undef CpuSrvcCoreIdPositionInInitialApicId
+#undef CpuSrvcSaveFeatures
+#undef CpuSrvcWriteFeatures
+#undef CpuSrvcSetWarmResetFlag
+#undef CpuSrvcGetWarmResetFlag
+#undef CpuSrvcGetBrandString1
+#undef CpuSrvcGetBrandString2
+#undef CpuSrvcGetMicroCodePatchesStruct
+#undef CpuSrvcGetMicrocodeEquivalenceTable
+#undef CpuSrvcGetCacheInfo
+#undef CpuSrvcGetSysPmTableStruct
+#undef CpuSrvcGetWheaInitData
+#undef CpuSrvcGetPlatformTypeSpecificInfo
+#undef CpuSrvcIsNbPstateEnabled
+#undef CpuSrvcNextLinkHasHtPhyFeats
+#undef CpuSrvcSetHtPhyRegister
+#undef CpuSrvcGetNextHtLinkFeatures
+#undef CpuSrvcRegisterTableList
+#undef CpuSrvcTableEntryTypeDescriptors
+#undef CpuSrvcPackageLinkMap
+#undef CpuSrvcComputeUnitMap
+#undef CpuSrvcInitCacheDisabled
+#undef CpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#undef CpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#undef CpuSrvcPatchLoaderIsSharedByCU
+
+#undef DfltCpuSrvcRevision
+#undef DfltCpuSrvcDisablePstate
+#undef DfltCpuSrvcTransitionPstate
+#undef DfltCpuSrvcGetProcIddMax
+#undef DfltCpuSrvcGetTscRate
+#undef DfltCpuSrvcGetCurrentNbFrequency
+#undef DfltCpuSrvcGetMinMaxNbFrequency
+#undef DfltCpuSrvcGetNbPstateInfo
+#undef DfltCpuSrvcIsNbCofInitNeeded
+#undef DfltCpuSrvcGetNbIddMax
+#undef DfltCpuSrvcLaunchApCore
+#undef DfltCpuSrvcGetNumberOfPhysicalCores
+#undef DfltCpuSrvcGetApMailboxFromHardware
+#undef DfltCpuSrvcSetApCoreNumber
+#undef DfltCpuSrvcGetApCoreNumber
+#undef DfltCpuSrvcTransferApCoreNumber
+#undef DfltCpuSrvcGetStoredNodeNumber
+#undef DfltCpuSrvcCoreIdPositionInInitialApicId
+#undef DfltCpuSrvcSaveFeatures
+#undef DfltCpuSrvcWriteFeatures
+#undef DfltCpuSrvcSetWarmResetFlag
+#undef DfltCpuSrvcGetWarmResetFlag
+#undef DfltCpuSrvcGetBrandString1
+#undef DfltCpuSrvcGetBrandString2
+#undef DfltCpuSrvcGetMicroCodePatchesStruct
+#undef DfltCpuSrvcGetMicrocodeEquivalenceTable
+#undef DfltCpuSrvcGetCacheInfo
+#undef DfltCpuSrvcGetSysPmTableStruct
+#undef DfltCpuSrvcGetWheaInitData
+#undef DfltCpuSrvcGetPlatformTypeSpecificInfo
+#undef DfltCpuSrvcIsNbPstateEnabled
+#undef DfltCpuSrvcNextLinkHasHtPhyFeats
+#undef DfltCpuSrvcSetHtPhyRegister
+#undef DfltCpuSrvcGetNextHtLinkFeatures
+#undef DfltCpuSrvcRegisterTableList
+#undef DfltCpuSrvcTableEntryTypeDescriptors
+#undef DfltCpuSrvcPackageLinkMap
+#undef DfltCpuSrvcComputeUnitMap
+#undef DfltCpuSrvcInitCacheDisabled
+#undef DfltCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#undef DfltCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#undef DfltCpuSrvcPatchLoaderIsSharedByCU
+
+#undef DfltAssertCpuSrvcRevision
+#undef DfltAssertCpuSrvcDisablePstate
+#undef DfltAssertCpuSrvcTransitionPstate
+#undef DfltAssertCpuSrvcGetProcIddMax
+#undef DfltAssertCpuSrvcGetTscRate
+#undef DfltAssertCpuSrvcGetCurrentNbFrequency
+#undef DfltAssertCpuSrvcGetMinMaxNbFrequency
+#undef DfltAssertCpuSrvcGetNbPstateInfo
+#undef DfltAssertCpuSrvcIsNbCofInitNeeded
+#undef DfltAssertCpuSrvcGetNbIddMax
+#undef DfltAssertCpuSrvcLaunchApCore
+#undef DfltAssertCpuSrvcGetNumberOfPhysicalCores
+#undef DfltAssertCpuSrvcGetApMailboxFromHardware
+#undef DfltAssertCpuSrvcSetApCoreNumber
+#undef DfltAssertCpuSrvcGetApCoreNumber
+#undef DfltAssertCpuSrvcTransferApCoreNumber
+#undef DfltAssertCpuSrvcGetStoredNodeNumber
+#undef DfltAssertCpuSrvcCoreIdPositionInInitialApicId
+#undef DfltAssertCpuSrvcSaveFeatures
+#undef DfltAssertCpuSrvcWriteFeatures
+#undef DfltAssertCpuSrvcSetWarmResetFlag
+#undef DfltAssertCpuSrvcGetWarmResetFlag
+#undef DfltAssertCpuSrvcGetBrandString1
+#undef DfltAssertCpuSrvcGetBrandString2
+#undef DfltAssertCpuSrvcGetMicroCodePatchesStruct
+#undef DfltAssertCpuSrvcGetMicrocodeEquivalenceTable
+#undef DfltAssertCpuSrvcGetCacheInfo
+#undef DfltAssertCpuSrvcGetSysPmTableStruct
+#undef DfltAssertCpuSrvcGetWheaInitData
+#undef DfltAssertCpuSrvcGetPlatformTypeSpecificInfo
+#undef DfltAssertCpuSrvcIsNbPstateEnabled
+#undef DfltAssertCpuSrvcNextLinkHasHtPhyFeats
+#undef DfltAssertCpuSrvcSetHtPhyRegister
+#undef DfltAssertCpuSrvcGetNextHtLinkFeatures
+#undef DfltAssertCpuSrvcRegisterTableList
+#undef DfltAssertCpuSrvcTableEntryTypeDescriptors
+#undef DfltAssertCpuSrvcPackageLinkMap
+#undef DfltAssertCpuSrvcComputeUnitMap
+#undef DfltAssertCpuSrvcInitCacheDisabled
+#undef DfltAssertCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#undef DfltAssertCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#undef DfltAssertCpuSrvcPatchLoaderIsSharedByCU
+
+#undef OvrdDfltCpuSrvcRevision
+#undef OvrdDfltCpuSrvcDisablePstate
+#undef OvrdDfltCpuSrvcTransitionPstate
+#undef OvrdDfltCpuSrvcGetProcIddMax
+#undef OvrdDfltCpuSrvcGetTscRate
+#undef OvrdDfltCpuSrvcGetCurrentNbFrequency
+#undef OvrdDfltCpuSrvcGetMinMaxNbFrequency
+#undef OvrdDfltCpuSrvcGetNbPstateInfo
+#undef OvrdDfltCpuSrvcIsNbCofInitNeeded
+#undef OvrdDfltCpuSrvcGetNbIddMax
+#undef OvrdDfltCpuSrvcLaunchApCore
+#undef OvrdDfltCpuSrvcGetNumberOfPhysicalCores
+#undef OvrdDfltCpuSrvcGetApMailboxFromHardware
+#undef OvrdDfltCpuSrvcSetApCoreNumber
+#undef OvrdDfltCpuSrvcGetApCoreNumber
+#undef OvrdDfltCpuSrvcTransferApCoreNumber
+#undef OvrdDfltCpuSrvcGetStoredNodeNumber
+#undef OvrdDfltCpuSrvcCoreIdPositionInInitialApicId
+#undef OvrdDfltCpuSrvcSaveFeatures
+#undef OvrdDfltCpuSrvcWriteFeatures
+#undef OvrdDfltCpuSrvcSetWarmResetFlag
+#undef OvrdDfltCpuSrvcGetWarmResetFlag
+#undef OvrdDfltCpuSrvcGetBrandString1
+#undef OvrdDfltCpuSrvcGetBrandString2
+#undef OvrdDfltCpuSrvcGetMicroCodePatchesStruct
+#undef OvrdDfltCpuSrvcGetMicrocodeEquivalenceTable
+#undef OvrdDfltCpuSrvcGetCacheInfo
+#undef OvrdDfltCpuSrvcGetSysPmTableStruct
+#undef OvrdDfltCpuSrvcGetWheaInitData
+#undef OvrdDfltCpuSrvcGetPlatformTypeSpecificInfo
+#undef OvrdDfltCpuSrvcIsNbPstateEnabled
+#undef OvrdDfltCpuSrvcNextLinkHasHtPhyFeats
+#undef OvrdDfltCpuSrvcSetHtPhyRegister
+#undef OvrdDfltCpuSrvcGetNextHtLinkFeatures
+#undef OvrdDfltCpuSrvcRegisterTableList
+#undef OvrdDfltCpuSrvcTableEntryTypeDescriptors
+#undef OvrdDfltCpuSrvcPackageLinkMap
+#undef OvrdDfltCpuSrvcComputeUnitMap
+#undef OvrdDfltCpuSrvcInitCacheDisabled
+#undef OvrdDfltCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#undef OvrdDfltCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#undef OvrdDfltCpuSrvcPatchLoaderIsSharedByCU
+
+#undef OvrdDfltAssertCpuSrvcRevision
+#undef OvrdDfltAssertCpuSrvcDisablePstate
+#undef OvrdDfltAssertCpuSrvcTransitionPstate
+#undef OvrdDfltAssertCpuSrvcGetProcIddMax
+#undef OvrdDfltAssertCpuSrvcGetTscRate
+#undef OvrdDfltAssertCpuSrvcGetCurrentNbFrequency
+#undef OvrdDfltAssertCpuSrvcGetMinMaxNbFrequency
+#undef OvrdDfltAssertCpuSrvcGetNbPstateInfo
+#undef OvrdDfltAssertCpuSrvcIsNbCofInitNeeded
+#undef OvrdDfltAssertCpuSrvcGetNbIddMax
+#undef OvrdDfltAssertCpuSrvcLaunchApCore
+#undef OvrdDfltAssertCpuSrvcGetNumberOfPhysicalCores
+#undef OvrdDfltAssertCpuSrvcGetApMailboxFromHardware
+#undef OvrdDfltAssertCpuSrvcSetApCoreNumber
+#undef OvrdDfltAssertCpuSrvcGetApCoreNumber
+#undef OvrdDfltAssertCpuSrvcTransferApCoreNumber
+#undef OvrdDfltAssertCpuSrvcGetStoredNodeNumber
+#undef OvrdDfltAssertCpuSrvcCoreIdPositionInInitialApicId
+#undef OvrdDfltAssertCpuSrvcSaveFeatures
+#undef OvrdDfltAssertCpuSrvcWriteFeatures
+#undef OvrdDfltAssertCpuSrvcSetWarmResetFlag
+#undef OvrdDfltAssertCpuSrvcGetWarmResetFlag
+#undef OvrdDfltAssertCpuSrvcGetBrandString1
+#undef OvrdDfltAssertCpuSrvcGetBrandString2
+#undef OvrdDfltAssertCpuSrvcGetMicroCodePatchesStruct
+#undef OvrdDfltAssertCpuSrvcGetMicrocodeEquivalenceTable
+#undef OvrdDfltAssertCpuSrvcGetCacheInfo
+#undef OvrdDfltAssertCpuSrvcGetSysPmTableStruct
+#undef OvrdDfltAssertCpuSrvcGetWheaInitData
+#undef OvrdDfltAssertCpuSrvcGetPlatformTypeSpecificInfo
+#undef OvrdDfltAssertCpuSrvcIsNbPstateEnabled
+#undef OvrdDfltAssertCpuSrvcNextLinkHasHtPhyFeats
+#undef OvrdDfltAssertCpuSrvcSetHtPhyRegister
+#undef OvrdDfltAssertCpuSrvcGetNextHtLinkFeatures
+#undef OvrdDfltAssertCpuSrvcRegisterTableList
+#undef OvrdDfltAssertCpuSrvcTableEntryTypeDescriptors
+#undef OvrdDfltAssertCpuSrvcPackageLinkMap
+#undef OvrdDfltAssertCpuSrvcComputeUnitMap
+#undef OvrdDfltAssertCpuSrvcInitCacheDisabled
+#undef OvrdDfltAssertCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#undef OvrdDfltAssertCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#undef OvrdDfltAssertCpuSrvcPatchLoaderIsSharedByCU
+
+#undef FinalDfltCpuSrvcRevision
+#undef FinalDfltCpuSrvcDisablePstate
+#undef FinalDfltCpuSrvcTransitionPstate
+#undef FinalDfltCpuSrvcGetProcIddMax
+#undef FinalDfltCpuSrvcGetTscRate
+#undef FinalDfltCpuSrvcGetCurrentNbFrequency
+#undef FinalDfltCpuSrvcGetMinMaxNbFrequency
+#undef FinalDfltCpuSrvcGetNbPstateInfo
+#undef FinalDfltCpuSrvcIsNbCofInitNeeded
+#undef FinalDfltCpuSrvcGetNbIddMax
+#undef FinalDfltCpuSrvcLaunchApCore
+#undef FinalDfltCpuSrvcGetNumberOfPhysicalCores
+#undef FinalDfltCpuSrvcGetApMailboxFromHardware
+#undef FinalDfltCpuSrvcSetApCoreNumber
+#undef FinalDfltCpuSrvcGetApCoreNumber
+#undef FinalDfltCpuSrvcTransferApCoreNumber
+#undef FinalDfltCpuSrvcGetStoredNodeNumber
+#undef FinalDfltCpuSrvcCoreIdPositionInInitialApicId
+#undef FinalDfltCpuSrvcSaveFeatures
+#undef FinalDfltCpuSrvcWriteFeatures
+#undef FinalDfltCpuSrvcSetWarmResetFlag
+#undef FinalDfltCpuSrvcGetWarmResetFlag
+#undef FinalDfltCpuSrvcGetBrandString1
+#undef FinalDfltCpuSrvcGetBrandString2
+#undef FinalDfltCpuSrvcGetMicroCodePatchesStruct
+#undef FinalDfltCpuSrvcGetMicrocodeEquivalenceTable
+#undef FinalDfltCpuSrvcGetCacheInfo
+#undef FinalDfltCpuSrvcGetSysPmTableStruct
+#undef FinalDfltCpuSrvcGetWheaInitData
+#undef FinalDfltCpuSrvcGetPlatformTypeSpecificInfo
+#undef FinalDfltCpuSrvcIsNbPstateEnabled
+#undef FinalDfltCpuSrvcNextLinkHasHtPhyFeats
+#undef FinalDfltCpuSrvcSetHtPhyRegister
+#undef FinalDfltCpuSrvcGetNextHtLinkFeatures
+#undef FinalDfltCpuSrvcRegisterTableList
+#undef FinalDfltCpuSrvcTableEntryTypeDescriptors
+#undef FinalDfltCpuSrvcPackageLinkMap
+#undef FinalDfltCpuSrvcComputeUnitMap
+#undef FinalDfltCpuSrvcInitCacheDisabled
+#undef FinalDfltCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#undef FinalDfltCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#undef FinalDfltCpuSrvcPatchLoaderIsSharedByCU
+
+#undef FinalDfltAssertCpuSrvcRevision
+#undef FinalDfltAssertCpuSrvcDisablePstate
+#undef FinalDfltAssertCpuSrvcTransitionPstate
+#undef FinalDfltAssertCpuSrvcGetProcIddMax
+#undef FinalDfltAssertCpuSrvcGetTscRate
+#undef FinalDfltAssertCpuSrvcGetCurrentNbFrequency
+#undef FinalDfltAssertCpuSrvcGetMinMaxNbFrequency
+#undef FinalDfltAssertCpuSrvcGetNbPstateInfo
+#undef FinalDfltAssertCpuSrvcIsNbCofInitNeeded
+#undef FinalDfltAssertCpuSrvcGetNbIddMax
+#undef FinalDfltAssertCpuSrvcLaunchApCore
+#undef FinalDfltAssertCpuSrvcGetNumberOfPhysicalCores
+#undef FinalDfltAssertCpuSrvcGetApMailboxFromHardware
+#undef FinalDfltAssertCpuSrvcSetApCoreNumber
+#undef FinalDfltAssertCpuSrvcGetApCoreNumber
+#undef FinalDfltAssertCpuSrvcTransferApCoreNumber
+#undef FinalDfltAssertCpuSrvcGetStoredNodeNumber
+#undef FinalDfltAssertCpuSrvcCoreIdPositionInInitialApicId
+#undef FinalDfltAssertCpuSrvcSaveFeatures
+#undef FinalDfltAssertCpuSrvcWriteFeatures
+#undef FinalDfltAssertCpuSrvcSetWarmResetFlag
+#undef FinalDfltAssertCpuSrvcGetWarmResetFlag
+#undef FinalDfltAssertCpuSrvcGetBrandString1
+#undef FinalDfltAssertCpuSrvcGetBrandString2
+#undef FinalDfltAssertCpuSrvcGetMicroCodePatchesStruct
+#undef FinalDfltAssertCpuSrvcGetMicrocodeEquivalenceTable
+#undef FinalDfltAssertCpuSrvcGetCacheInfo
+#undef FinalDfltAssertCpuSrvcGetSysPmTableStruct
+#undef FinalDfltAssertCpuSrvcGetWheaInitData
+#undef FinalDfltAssertCpuSrvcGetPlatformTypeSpecificInfo
+#undef FinalDfltAssertCpuSrvcIsNbPstateEnabled
+#undef FinalDfltAssertCpuSrvcNextLinkHasHtPhyFeats
+#undef FinalDfltAssertCpuSrvcSetHtPhyRegister
+#undef FinalDfltAssertCpuSrvcGetNextHtLinkFeatures
+#undef FinalDfltAssertCpuSrvcRegisterTableList
+#undef FinalDfltAssertCpuSrvcTableEntryTypeDescriptors
+#undef FinalDfltAssertCpuSrvcPackageLinkMap
+#undef FinalDfltAssertCpuSrvcComputeUnitMap
+#undef FinalDfltAssertCpuSrvcInitCacheDisabled
+#undef FinalDfltAssertCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#undef FinalDfltAssertCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#undef FinalDfltAssertCpuSrvcPatchLoaderIsSharedByCU
+
+#undef FinalCpuSrvcRevision
+#undef FinalCpuSrvcDisablePstate
+#undef FinalCpuSrvcTransitionPstate
+#undef FinalCpuSrvcGetProcIddMax
+#undef FinalCpuSrvcGetTscRate
+#undef FinalCpuSrvcGetCurrentNbFrequency
+#undef FinalCpuSrvcGetMinMaxNbFrequency
+#undef FinalCpuSrvcGetNbPstateInfo
+#undef FinalCpuSrvcIsNbCofInitNeeded
+#undef FinalCpuSrvcGetNbIddMax
+#undef FinalCpuSrvcLaunchApCore
+#undef FinalCpuSrvcGetNumberOfPhysicalCores
+#undef FinalCpuSrvcGetApMailboxFromHardware
+#undef FinalCpuSrvcSetApCoreNumber
+#undef FinalCpuSrvcGetApCoreNumber
+#undef FinalCpuSrvcTransferApCoreNumber
+#undef FinalCpuSrvcGetStoredNodeNumber
+#undef FinalCpuSrvcCoreIdPositionInInitialApicId
+#undef FinalCpuSrvcSaveFeatures
+#undef FinalCpuSrvcWriteFeatures
+#undef FinalCpuSrvcSetWarmResetFlag
+#undef FinalCpuSrvcGetWarmResetFlag
+#undef FinalCpuSrvcGetBrandString1
+#undef FinalCpuSrvcGetBrandString2
+#undef FinalCpuSrvcGetMicroCodePatchesStruct
+#undef FinalCpuSrvcGetMicrocodeEquivalenceTable
+#undef FinalCpuSrvcGetCacheInfo
+#undef FinalCpuSrvcGetSysPmTableStruct
+#undef FinalCpuSrvcGetWheaInitData
+#undef FinalCpuSrvcGetPlatformTypeSpecificInfo
+#undef FinalCpuSrvcIsNbPstateEnabled
+#undef FinalCpuSrvcNextLinkHasHtPhyFeats
+#undef FinalCpuSrvcSetHtPhyRegister
+#undef FinalCpuSrvcGetNextHtLinkFeatures
+#undef FinalCpuSrvcRegisterTableList
+#undef FinalCpuSrvcTableEntryTypeDescriptors
+#undef FinalCpuSrvcPackageLinkMap
+#undef FinalCpuSrvcComputeUnitMap
+#undef FinalCpuSrvcInitCacheDisabled
+#undef FinalCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#undef FinalCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#undef FinalCpuSrvcPatchLoaderIsSharedByCU
+
+//
+// Define null CPU specific services - no redefinition is expected.
+//
+#define NullCpuSrvcRevision (UINT16) 0
+#define NullCpuSrvcDisablePstate (PF_CPU_DISABLE_PSTATE) CommonReturnAgesaSuccess
+#define NullCpuSrvcTransitionPstate (PF_CPU_TRANSITION_PSTATE) CommonReturnAgesaSuccess
+#define NullCpuSrvcGetProcIddMax (PF_CPU_GET_IDD_MAX) CommonReturnFalse
+#define NullCpuSrvcGetTscRate (PF_CPU_GET_TSC_RATE) CommonReturnAgesaSuccess
+#define NullCpuSrvcGetCurrentNbFrequency (PF_CPU_GET_NB_FREQ) CommonReturnAgesaError
+#define NullCpuSrvcGetMinMaxNbFrequency (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonReturnAgesaError
+#define NullCpuSrvcGetNbPstateInfo (PF_CPU_GET_NB_PSTATE_INFO) CommonReturnFalse
+#define NullCpuSrvcIsNbCofInitNeeded (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonReturnAgesaSuccess
+#define NullCpuSrvcGetNbIddMax (PF_CPU_GET_NB_IDD_MAX) CommonReturnFalse
+#define NullCpuSrvcLaunchApCore (PF_CPU_AP_INITIAL_LAUNCH) CommonReturnFalse
+#define NullCpuSrvcGetNumberOfPhysicalCores (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonReturnZero8
+#define NullCpuSrvcGetApMailboxFromHardware (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonReturnAgesaSuccess
+#define NullCpuSrvcSetApCoreNumber (PF_CPU_SET_AP_CORE_NUMBER) CommonVoid
+#define NullCpuSrvcGetApCoreNumber (PF_CPU_GET_AP_CORE_NUMBER) CommonReturnOne32
+#define NullCpuSrvcTransferApCoreNumber (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonVoid
+#define NullCpuSrvcGetStoredNodeNumber (PF_CPU_GET_STORED_NODE_NUMBER) CommonReturnZero32
+#define NullCpuSrvcCoreIdPositionInInitialApicId (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonReturnAgesaSuccess
+#define NullCpuSrvcSaveFeatures (PF_CPU_SAVE_FEATURES) CommonVoid
+#define NullCpuSrvcWriteFeatures (PF_CPU_WRITE_FEATURES) CommonVoid
+#define NullCpuSrvcSetWarmResetFlag (PF_CPU_SET_WARM_RESET_FLAG) CommonReturnAgesaSuccess
+#define NullCpuSrvcGetWarmResetFlag (PF_CPU_GET_WARM_RESET_FLAG) CommonReturnAgesaSuccess
+#define NullCpuSrvcGetBrandString1 (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetEmptyArray
+#define NullCpuSrvcGetBrandString2 (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetEmptyArray
+#define NullCpuSrvcGetMicroCodePatchesStruct (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetEmptyArray
+#define NullCpuSrvcGetMicrocodeEquivalenceTable (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetEmptyArray
+#define NullCpuSrvcGetCacheInfo (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetEmptyArray
+#define NullCpuSrvcGetSysPmTableStruct (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetEmptyArray
+#define NullCpuSrvcGetWheaInitData (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) GetEmptyArray
+#define NullCpuSrvcGetPlatformTypeSpecificInfo (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonReturnAgesaSuccess
+#define NullCpuSrvcIsNbPstateEnabled (PF_IS_NB_PSTATE_ENABLED) CommonReturnFalse
+#define NullCpuSrvcNextLinkHasHtPhyFeats (PF_NEXT_LINK_HAS_HTPHY_FEATS) CommonReturnFalse
+#define NullCpuSrvcSetHtPhyRegister (PF_SET_HT_PHY_REGISTER) CommonVoid
+#define NullCpuSrvcGetNextHtLinkFeatures (PF_GET_NEXT_HT_LINK_FEATURES) CommonVoid
+#define NullCpuSrvcRegisterTableList (REGISTER_TABLE **) NULL
+#define NullCpuSrvcTableEntryTypeDescriptors (TABLE_ENTRY_TYPE_DESCRIPTOR *) NULL
+#define NullCpuSrvcPackageLinkMap (PACKAGE_HTLINK_MAP) NULL
+#define NullCpuSrvcComputeUnitMap (COMPUTE_UNIT_MAP *) NULL
+#define NullCpuSrvcInitCacheDisabled (FAMILY_CACHE_INIT_POLICY) InitCacheDisabled
+#define NullCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable (PF_GET_EARLY_INIT_TABLE) CommonVoid
+#define NullCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable (PF_GET_EARLY_INIT_TABLE) CommonVoid
+#define NullCpuSrvcPatchLoaderIsSharedByCU (BOOLEAN) FALSE
+//
+// Define default cpu specific services assertion if possible
+//
+#define DfltAssertCpuSrvcRevision NullCpuSrvcRevision
+#define DfltAssertCpuSrvcDisablePstate (PF_CPU_DISABLE_PSTATE) CommonAssert
+#define DfltAssertCpuSrvcTransitionPstate (PF_CPU_TRANSITION_PSTATE) CommonAssert
+#define DfltAssertCpuSrvcGetProcIddMax (PF_CPU_GET_IDD_MAX) CommonAssert
+#define DfltAssertCpuSrvcGetTscRate (PF_CPU_GET_TSC_RATE) CommonAssert
+#define DfltAssertCpuSrvcGetCurrentNbFrequency (PF_CPU_GET_NB_FREQ) CommonAssert
+#define DfltAssertCpuSrvcGetMinMaxNbFrequency (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonAssert
+#define DfltAssertCpuSrvcGetNbPstateInfo (PF_CPU_GET_NB_PSTATE_INFO) CommonAssert
+#define DfltAssertCpuSrvcIsNbCofInitNeeded (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonAssert
+#define DfltAssertCpuSrvcGetNbIddMax (PF_CPU_GET_NB_IDD_MAX) CommonAssert
+#define DfltAssertCpuSrvcLaunchApCore (PF_CPU_AP_INITIAL_LAUNCH) CommonAssert
+#define DfltAssertCpuSrvcGetNumberOfPhysicalCores (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonAssert
+#define DfltAssertCpuSrvcGetApMailboxFromHardware (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonAssert
+#define DfltAssertCpuSrvcSetApCoreNumber (PF_CPU_SET_AP_CORE_NUMBER) CommonAssert
+#define DfltAssertCpuSrvcGetApCoreNumber (PF_CPU_GET_AP_CORE_NUMBER) CommonAssert
+#define DfltAssertCpuSrvcTransferApCoreNumber (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonAssert
+#define DfltAssertCpuSrvcGetStoredNodeNumber (PF_CPU_GET_STORED_NODE_NUMBER) CommonAssert
+#define DfltAssertCpuSrvcCoreIdPositionInInitialApicId (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonAssert
+#define DfltAssertCpuSrvcSaveFeatures (PF_CPU_SAVE_FEATURES) CommonAssert
+#define DfltAssertCpuSrvcWriteFeatures (PF_CPU_WRITE_FEATURES) CommonAssert
+#define DfltAssertCpuSrvcSetWarmResetFlag (PF_CPU_SET_WARM_RESET_FLAG) CommonAssert
+#define DfltAssertCpuSrvcGetWarmResetFlag (PF_CPU_GET_WARM_RESET_FLAG) CommonAssert
+#define DfltAssertCpuSrvcGetBrandString1 (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert
+#define DfltAssertCpuSrvcGetBrandString2 (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert
+#define DfltAssertCpuSrvcGetMicroCodePatchesStruct (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert
+#define DfltAssertCpuSrvcGetMicrocodeEquivalenceTable (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert
+#define DfltAssertCpuSrvcGetCacheInfo (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert
+#define DfltAssertCpuSrvcGetSysPmTableStruct (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert
+#define DfltAssertCpuSrvcGetWheaInitData (PF_CPU_GET_FAMILY_SPECIFIC_ARRAY) CommonAssert
+#define DfltAssertCpuSrvcGetPlatformTypeSpecificInfo (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonAssert
+#define DfltAssertCpuSrvcIsNbPstateEnabled (PF_IS_NB_PSTATE_ENABLED) CommonAssert
+#define DfltAssertCpuSrvcNextLinkHasHtPhyFeats (PF_NEXT_LINK_HAS_HTPHY_FEATS) CommonAssert
+#define DfltAssertCpuSrvcSetHtPhyRegister (PF_SET_HT_PHY_REGISTER) CommonAssert
+#define DfltAssertCpuSrvcGetNextHtLinkFeatures (PF_GET_NEXT_HT_LINK_FEATURES) CommonAssert
+#define DfltAssertCpuSrvcRegisterTableList NullCpuSrvcRegisterTableList
+#define DfltAssertCpuSrvcTableEntryTypeDescriptors NullCpuSrvcTableEntryTypeDescriptors
+#define DfltAssertCpuSrvcPackageLinkMap NullCpuSrvcPackageLinkMap
+#define DfltAssertCpuSrvcComputeUnitMap NullCpuSrvcComputeUnitMap
+#define DfltAssertCpuSrvcInitCacheDisabled (FAMILY_CACHE_INIT_POLICY) InitCacheDisabled
+#define DfltAssertCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable (PF_GET_EARLY_INIT_TABLE) CommonAssert
+#define DfltAssertCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable (PF_GET_EARLY_INIT_TABLE) CommonAssert
+#define DfltAssertCpuSrvcPatchLoaderIsSharedByCU NullCpuSrvcPatchLoaderIsSharedByCU
+
+//
+// Define family specific services default when feature is enabled in the build
+//
+#define DfltCpuSrvcRevision NullCpuSrvcRevision
+#define DfltCpuSrvcDisablePstate DfltAssertCpuSrvcDisablePstate
+#define DfltCpuSrvcTransitionPstate DfltAssertCpuSrvcTransitionPstate
+#define DfltCpuSrvcGetProcIddMax NullCpuSrvcGetProcIddMax
+#define DfltCpuSrvcGetTscRate DfltAssertCpuSrvcGetTscRate
+#define DfltCpuSrvcGetCurrentNbFrequency DfltAssertCpuSrvcGetCurrentNbFrequency
+#define DfltCpuSrvcGetMinMaxNbFrequency NullCpuSrvcGetMinMaxNbFrequency
+#define DfltCpuSrvcGetNbPstateInfo NullCpuSrvcGetNbPstateInfo
+#define DfltCpuSrvcIsNbCofInitNeeded (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonReturnFalse
+#define DfltCpuSrvcGetNbIddMax DfltAssertCpuSrvcGetNbIddMax
+#define DfltCpuSrvcLaunchApCore NullCpuSrvcLaunchApCore
+#define DfltCpuSrvcGetNumberOfPhysicalCores (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonReturnOne8
+#define DfltCpuSrvcGetApMailboxFromHardware DfltAssertCpuSrvcGetApMailboxFromHardware
+#define DfltCpuSrvcSetApCoreNumber NullCpuSrvcSetApCoreNumber
+#define DfltCpuSrvcGetApCoreNumber NullCpuSrvcGetApCoreNumber
+#define DfltCpuSrvcTransferApCoreNumber NullCpuSrvcTransferApCoreNumber
+#define DfltCpuSrvcGetStoredNodeNumber NullCpuSrvcGetStoredNodeNumber
+#define DfltCpuSrvcCoreIdPositionInInitialApicId (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonReturnOne32
+#define DfltCpuSrvcSaveFeatures NullCpuSrvcSaveFeatures
+#define DfltCpuSrvcWriteFeatures NullCpuSrvcWriteFeatures
+#define DfltCpuSrvcSetWarmResetFlag (PF_CPU_SET_WARM_RESET_FLAG) CommonVoid
+#define DfltCpuSrvcGetWarmResetFlag DfltAssertCpuSrvcGetWarmResetFlag
+#define DfltCpuSrvcGetBrandString1 NullCpuSrvcGetBrandString1
+#define DfltCpuSrvcGetBrandString2 NullCpuSrvcGetBrandString2
+#define DfltCpuSrvcGetMicroCodePatchesStruct NullCpuSrvcGetMicroCodePatchesStruct
+#define DfltCpuSrvcGetMicrocodeEquivalenceTable NullCpuSrvcGetMicrocodeEquivalenceTable
+#define DfltCpuSrvcGetCacheInfo NullCpuSrvcGetCacheInfo
+#define DfltCpuSrvcGetSysPmTableStruct NullCpuSrvcGetSysPmTableStruct
+#define DfltCpuSrvcGetWheaInitData NullCpuSrvcGetWheaInitData
+#define DfltCpuSrvcGetPlatformTypeSpecificInfo NullCpuSrvcGetPlatformTypeSpecificInfo
+#define DfltCpuSrvcIsNbPstateEnabled NullCpuSrvcIsNbPstateEnabled
+#define DfltCpuSrvcNextLinkHasHtPhyFeats NullCpuSrvcNextLinkHasHtPhyFeats
+#define DfltCpuSrvcSetHtPhyRegister NullCpuSrvcSetHtPhyRegister
+#define DfltCpuSrvcGetNextHtLinkFeatures (PF_GET_NEXT_HT_LINK_FEATURES) CommonReturnFalse
+#define DfltCpuSrvcRegisterTableList NullCpuSrvcRegisterTableList
+#define DfltCpuSrvcTableEntryTypeDescriptors NullCpuSrvcTableEntryTypeDescriptors
+#define DfltCpuSrvcPackageLinkMap NullCpuSrvcPackageLinkMap
+#define DfltCpuSrvcComputeUnitMap NullCpuSrvcComputeUnitMap
+// NOTE: From CPUs with compute units and moving forward, we use InitCacheEnabled.
+#define DfltCpuSrvcInitCacheDisabled (FAMILY_CACHE_INIT_POLICY) InitCacheEnabled
+#define DfltCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable NullCpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable
+#define DfltCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable NullCpuSrvcGetEarlyInitAfterApLaunchOnCoreTable
+#define DfltCpuSrvcPatchLoaderIsSharedByCU NullCpuSrvcPatchLoaderIsSharedByCU
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionCrat.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionCrat.h
new file mode 100644
index 0000000..db5588d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionCrat.h
@@ -0,0 +1,193 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CRAT option API.
+ *
+ * Contains structures and values used to control the CRAT option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_CRAT_H_
+#define _OPTION_CRAT_H_
+
+#include "cpuLateInit.h"
+#include "cpuCrat.h"
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef AGESA_STATUS OPTION_CRAT_FEATURE (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **CratPtr
+ );
+
+#define CRAT_STRUCT_VERSION 0x01
+
+/// The Option Configuration of CRAT
+typedef struct {
+ UINT16 OptCratVersion; ///< The version number of CRAT
+ OPTION_CRAT_FEATURE *CratFeature; ///< The Option Feature of CRAT
+ UINT8 OemIdString[6]; ///< Configurable OEM Id
+ UINT8 OemTableIdString[8]; ///< Configurable OEM Table Id
+} OPTION_CRAT_CONFIGURATION;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to generat CRAT cache affinity structure.
+ *
+ * @param[in] CratHeaderStructPtr CRAT header pointer
+ * @param[in, out] TableEnd The end of CRAT
+ * @param[in, out] StdHeader Standard Head Pointer
+ *
+ *
+ */
+
+typedef VOID F_GENERATE_CRAT_CACHE (
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_GENERATE_CRAT_CACHE *PF_GENERATE_CRAT_CACHE;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to generat CRAT TLB affinity structure.
+ *
+ * @param[in] CratHeaderStructPtr CRAT header pointer
+ * @param[in, out] TableEnd The end of CRAT
+ * @param[in, out] StdHeader Standard Head Pointer
+ *
+ *
+ */
+
+typedef VOID F_GENERATE_CRAT_TLB (
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_GENERATE_CRAT_TLB *PF_GENERATE_CRAT_TLB;
+
+/**
+ * Provide the interface to the CRAT Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+typedef struct _CRAT_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_GENERATE_CRAT_CACHE generateCratCacheEntry; ///< Method: Family specific call to generat CRAT cache affinity structure
+ PF_GENERATE_CRAT_TLB generateCratTLBEntry; ///< Method: Family specific call to generat CRAT TLB affinity structure
+
+} CRAT_FAMILY_SERVICES;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+MakeHSAProcUnitEntry (
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+MakeMemoryEntry (
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+MakeCacheEntry (
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+MakeTLBEntry (
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// @todo
+//VOID
+//MakeFPUEntry (
+// IN CRAT_HEADER *CratHeaderStructPtr,
+// IN OUT UINT8 **TableEnd,
+// IN OUT AMD_CONFIG_PARAMS *StdHeader
+// );
+
+/// @todo
+//VOID
+//MakeIOEntry (
+// IN CRAT_HEADER *CratHeaderStructPtr,
+// IN OUT UINT8 **TableEnd,
+// IN OUT AMD_CONFIG_PARAMS *StdHeader
+// );
+
+UINT8 *
+AddOneCratEntry (
+ IN CRAT_ENTRY_TYPE CratEntryType,
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _OPTION_CRAT_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionCratInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionCratInstall.h
new file mode 100644
index 0000000..2b47e15
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionCratInstall.h
@@ -0,0 +1,127 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: CRAT
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_CRAT_INSTALL_H_
+#define _OPTION_CRAT_INSTALL_H_
+
+OPTION_CRAT_FEATURE GetAcpiCratStub;
+#define USER_CRAT_OPTION &GetAcpiCratStub
+
+#define F15_CRAT_SUPPORT
+#define F16_CRAT_SUPPORT
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#if AGESA_ENTRY_INIT_LATE == TRUE
+ #ifndef OPTION_CRAT
+ #error BLDOPT: Option not defined: "OPTION_CRAT"
+ #endif
+ #if OPTION_CRAT == TRUE
+ OPTION_CRAT_FEATURE GetAcpiCratMain;
+ #undef USER_CRAT_OPTION
+ #define USER_CRAT_OPTION &GetAcpiCratMain
+ /*
+ * Family service start
+ */
+ #ifdef OPTION_FAMILY15H
+ #if OPTION_FAMILY15H == TRUE
+ #if ((OPTION_FAMILY15H_TN == TRUE)
+ extern CONST CRAT_FAMILY_SERVICES ROMDATA F15CratSupport;
+ #undef F15_CRAT_SUPPORT
+ #define F15_CRAT_SUPPORT {AMD_FAMILY_15, &F15CratSupport},
+ #endif
+ #endif
+ #endif
+
+ #ifdef OPTION_FAMILY16H
+ #if OPTION_FAMILY16H == TRUE
+ extern CONST CRAT_FAMILY_SERVICES ROMDATA F16CratSupport;
+ #undef F16_CRAT_SUPPORT
+ #define F16_CRAT_SUPPORT {AMD_FAMILY_16, &F16CratSupport},
+ #endif
+ #endif
+ /*
+ * Family service end
+ */
+ #endif
+#endif
+
+/* Declare the instance of the CRAT option configuration structure */
+CONST OPTION_CRAT_CONFIGURATION ROMDATA OptionCratConfiguration = {
+ CRAT_STRUCT_VERSION,
+ USER_CRAT_OPTION,
+ {CFG_ACPI_SET_OEM_ID},
+ {CFG_ACPI_SET_OEM_TABLE_ID}
+};
+
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA CratFamilyServiceArray[] =
+{
+ F16_CRAT_SUPPORT
+ F15_CRAT_SUPPORT
+ {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA CratFamilyServiceTable =
+{
+ (sizeof (CratFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &CratFamilyServiceArray[0]
+};
+
+
+/// All entries that CRAT needs
+CONST S_MAKE_CRAT_ENTRY ROMDATA MakeCratEntryTable[] =
+{
+ {MakeHSAProcUnitEntry},
+ {MakeMemoryEntry},
+ {MakeCacheEntry},
+ {MakeTLBEntry},
+ /// @todo
+ //MakeFPUEntry,
+ //MakeIOEntry,
+ {NULL}
+};
+#endif // _OPTION_CRAT_INSTALL_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionDmi.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionDmi.h
new file mode 100644
index 0000000..9fbc889
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionDmi.h
@@ -0,0 +1,89 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD DMI option API.
+ *
+ * Contains structures and values used to control the DMI option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_DMI_H_
+#define _OPTION_DMI_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef AGESA_STATUS OPTION_DMI_FEATURE (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT DMI_INFO **DmiPtr
+ );
+
+typedef AGESA_STATUS OPTION_DMI_RELEASE_BUFFER (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#define DMI_STRUCT_VERSION 0x01
+
+/// DMI option configuration. Determine the item of structure when compiling.
+typedef struct {
+ UINT16 OptDmiVersion; ///< Dmi version.
+ OPTION_DMI_FEATURE *DmiFeature; ///< Feature main routine, otherwise dummy.
+ OPTION_DMI_RELEASE_BUFFER *DmiReleaseBuffer; ///< Release buffer
+ UINT16 NumEntries; ///< Number of entry.
+ VOID *((*FamilyList)[]); ///< Family service.
+} OPTION_DMI_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif // _OPTION_DMI_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionDmiInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionDmiInstall.h
new file mode 100644
index 0000000..ce8ef06
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionDmiInstall.h
@@ -0,0 +1,125 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: DMI
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_DMI_INSTALL_H_
+#define _OPTION_DMI_INSTALL_H_
+
+#include "cpuLateInit.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+OPTION_DMI_FEATURE GetDmiInfoStub;
+OPTION_DMI_RELEASE_BUFFER ReleaseDmiBufferStub;
+#define USER_DMI_OPTION GetDmiInfoStub
+#define USER_DMI_RELEASE_BUFFER ReleaseDmiBufferStub
+#define CPU_DMI_AP_GET_TYPE4_TYPE7
+
+#define FAM15_TN_DMI_TABLE
+#define FAM16_KB_DMI_TABLE
+
+#ifndef OPTION_DMI
+ #error BLDOPT: Option not defined: "OPTION_DMI"
+#endif
+
+#if OPTION_DMI == TRUE
+ #if AGESA_ENTRY_INIT_LATE == TRUE
+ OPTION_DMI_FEATURE GetDmiInfoMain;
+ OPTION_DMI_RELEASE_BUFFER ReleaseDmiBuffer;
+ #undef USER_DMI_OPTION
+ #define USER_DMI_OPTION &GetDmiInfoMain
+ #undef USER_DMI_RELEASE_BUFFER
+ #define USER_DMI_RELEASE_BUFFER &ReleaseDmiBuffer
+
+ // This additional check keeps AP launch routines from being unnecessarily included
+ // in single socket systems.
+ #if OPTION_MULTISOCKET == TRUE
+ #undef AGESA_ENTRY_LATE_RUN_AP_TASK
+ #define AGESA_ENTRY_LATE_RUN_AP_TASK TRUE
+ #undef CPU_DMI_AP_GET_TYPE4_TYPE7
+ #define CPU_DMI_AP_GET_TYPE4_TYPE7 {AP_LATE_TASK_GET_TYPE4_TYPE7, (IMAGE_ENTRY) GetType4Type7Info},
+ #endif
+
+ // Family 15
+ #ifdef OPTION_FAMILY15H
+ #if OPTION_FAMILY15H == TRUE
+ #if OPTION_FAMILY15H_TN == TRUE
+ extern PROC_FAMILY_TABLE ProcFamily15TnDmiTable;
+ #undef FAM15_TN_DMI_TABLE
+ #define FAM15_TN_DMI_TABLE &ProcFamily15TnDmiTable,
+ #endif
+ #endif
+ #endif
+
+ // Family 16
+ #ifdef OPTION_FAMILY16H
+ #if OPTION_FAMILY16H == TRUE
+ #if OPTION_FAMILY16H_KB
+ extern PROC_FAMILY_TABLE ProcFamily16KbDmiTable;
+ #undef FAM16_KB_DMI_TABLE
+ #define FAM16_KB_DMI_TABLE &ProcFamily16KbDmiTable,
+ #endif
+ #endif
+ #endif
+ #endif
+#endif
+
+/* Declare the Family List. An array of pointers to tables that each describe a family */
+CONST PROC_FAMILY_TABLE ROMDATA *ProcTables[] = {
+ FAM15_TN_DMI_TABLE
+ FAM16_KB_DMI_TABLE
+ NULL
+};
+
+/* Declare the instance of the DMI option configuration structure */
+CONST OPTION_DMI_CONFIGURATION ROMDATA OptionDmiConfiguration = {
+ DMI_STRUCT_VERSION,
+ USER_DMI_OPTION,
+ USER_DMI_RELEASE_BUFFER,
+ ((sizeof (ProcTables) / sizeof (PROC_FAMILY_TABLE *)) - 1), // Including 'NULL' in above ProcTables would
+ // cause one more entry is counted.
+ (VOID *((*)[])) &ProcTables // Compiler says array size must match struct decl
+};
+
+#endif // _OPTION_DMI_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionFamily16hEarlySample.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionFamily16hEarlySample.h
new file mode 100644
index 0000000..2c424c0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionFamily16hEarlySample.h
@@ -0,0 +1,75 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Family 16h 'early sample' support
+ *
+ * This file defines the required structures for family 16h pre-production processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_FAMILY_16H_EARLY_SAMPLE_H_
+#define _OPTION_FAMILY_16H_EARLY_SAMPLE_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*
+ * Install family 16h model 0x00 - 0x0F Early Sample support
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+
+#endif // _OPTION_FAMILY_16H_EARLY_SAMPLE_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionFamily16hInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionFamily16hInstall.h
new file mode 100644
index 0000000..92dae54
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionFamily16hInstall.h
@@ -0,0 +1,332 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of family 16h support
+ *
+ * This file generates the defaults tables for family 16h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 87264 $ @e \$Date: 2013-01-31 09:26:23 -0600 (Thu, 31 Jan 2013) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_FAMILY_16H_INSTALL_H_
+#define _OPTION_FAMILY_16H_INSTALL_H_
+
+#include "OptionFamily16hEarlySample.h"
+#include "cpuFamilyTranslation.h"
+
+
+/*
+ * Pull in family specific services based on entry point
+ */
+
+/*
+ * Common Family 16h routines
+ */
+
+/*
+ * Install family 16h model 00h - 0Fh support
+ */
+#ifdef OPTION_FAMILY16H_KB
+ #if OPTION_FAMILY16H_KB == TRUE
+ extern CONST REGISTER_TABLE ROMDATA F16KbPciRegisterTableBeforeApLaunch;
+ extern CONST REGISTER_TABLE ROMDATA F16KbPciRegisterTableAfterApLaunch;
+ extern CONST REGISTER_TABLE ROMDATA F16KbPciWorkaroundTable;
+ extern CONST REGISTER_TABLE ROMDATA F16KbMsrRegisterTable;
+ extern CONST REGISTER_TABLE ROMDATA F16KbMsrWorkaroundTable;
+ extern CONST REGISTER_TABLE ROMDATA F16KbSharedMsrRegisterTable;
+ extern CONST REGISTER_TABLE ROMDATA F16KbSharedMsrWorkaroundTable;
+
+ /**
+ * Compute unit and Compute unit primary determination table.
+ *
+ * The four fields from the compute unit status hardware register can be used to determine whether
+ * even number cores are primary or all cores are primary. It can be extended if it is
+ * decided to have other configs as well. The other logically possible value sets are BitMapMapping,
+ * but they are currently not supported by the processor.
+ */
+ CONST COMPUTE_UNIT_MAP ROMDATA HtFam16KbComputeUnitMapping[] =
+ {
+ {1, 'x', 'x', 1, QuadCoresMapping}, ///< 1 Compute Unit with 4 Cores
+ {1, 'x', 1, 0, TripleCoresMapping}, ///< 1 Compute Unit with 3 Cores
+ {1, 1, 0, 0, EvenCoresMapping}, ///< 1 Compute Unit with 2 cores
+ {1, 0, 0, 0, AllCoresMapping}, ///< 1 Compute Unit with 1 Cores
+ {HT_LIST_TERMINAL, HT_LIST_TERMINAL, HT_LIST_TERMINAL, HT_LIST_TERMINAL, MaxComputeUnitMapping} ///< End
+ };
+
+
+ #if USES_REGISTER_TABLES == TRUE
+ CONST REGISTER_TABLE ROMDATA *F16KbRegisterTables[] =
+ {
+ #if MODEL_SPECIFIC_PCI == TRUE
+ &F16KbPciRegisterTableBeforeApLaunch,
+ &F16KbPciRegisterTableAfterApLaunch,
+ &F16KbPciWorkaroundTable,
+ #endif
+ #if MODEL_SPECIFIC_MSR == TRUE
+ &F16KbMsrRegisterTable,
+ &F16KbMsrWorkaroundTable,
+ &F16KbSharedMsrRegisterTable,
+ &F16KbSharedMsrWorkaroundTable,
+ #endif
+ // the end.
+ NULL
+ };
+ #endif
+
+ #if USES_REGISTER_TABLES == TRUE
+ CONST TABLE_ENTRY_TYPE_DESCRIPTOR ROMDATA F16KbTableEntryTypeDescriptors[] =
+ {
+ {MsrRegister, SetRegisterForMsrEntry},
+ {PciRegister, SetRegisterForPciEntry},
+ {FamSpecificWorkaround, SetRegisterForFamSpecificWorkaroundEntry},
+ {ProfileFixup, SetRegisterForPerformanceProfileEntry},
+ {CoreCountsPciRegister, SetRegisterForCoreCountsPerformanceEntry},
+ // End
+ {TableEntryTypeMax, (PF_DO_TABLE_ENTRY)CommonVoid}
+ };
+ #endif
+
+ /**
+ * Early Init Tables
+ *
+ */
+ extern F_PERFORM_EARLY_INIT_ON_CORE SetRegistersFromTablesBeforeApLaunch;
+ extern F_PERFORM_EARLY_INIT_ON_CORE SetRegistersFromTablesAfterApLaunch;
+ extern F_PERFORM_EARLY_INIT_ON_CORE F16SetBrandIdRegistersAtEarly;
+ extern F_PERFORM_EARLY_INIT_ON_CORE LocalApicInitializationAtEarly;
+ extern F_PERFORM_EARLY_INIT_ON_CORE LoadMicrocodePatchAtEarly;
+
+ CONST S_PERFORM_EARLY_INIT_ON_CORE ROMDATA F16KbEarlyInitBeforeApLaunchOnCoreTable[] =
+ {
+ {SetRegistersFromTablesBeforeApLaunch, PERFORM_EARLY_ANY_CONDITION},
+ {LocalApicInitializationAtEarly, PERFORM_EARLY_ANY_CONDITION},
+ #if OPTION_EARLY_SAMPLES == TRUE
+ {LoadMicrocodePatchAtEarly, PERFORM_EARLY_ANY_CONDITION},
+ #endif
+ {NULL, 0}
+ };
+
+ CONST S_PERFORM_EARLY_INIT_ON_CORE ROMDATA F16KbEarlyInitAfterApLaunchOnCoreTable[] =
+ {
+ {SetRegistersFromTablesAfterApLaunch, PERFORM_EARLY_ANY_CONDITION},
+ {F16SetBrandIdRegistersAtEarly, PERFORM_EARLY_ANY_CONDITION},
+ #if OPTION_EARLY_SAMPLES == FALSE
+ {LoadMicrocodePatchAtEarly, PERFORM_EARLY_ANY_CONDITION},
+ #endif
+ {NULL, 0}
+ };
+
+ #include "OptionCpuSpecificServicesInstallReset.h"
+ #define CpuSrvcTableName cpuF16KbServices
+
+ #define CpuSrvcDisablePstate F16DisablePstate
+ #define CpuSrvcTransitionPstate F16TransitionPstate
+ #define CpuSrvcGetProcIddMax F16KbGetProcIddMax
+ #define CpuSrvcGetTscRate F16GetTscRate
+ #define CpuSrvcGetCurrentNbFrequency F16KbGetCurrentNbFrequency
+ #define CpuSrvcGetMinMaxNbFrequency F16KbGetMinMaxNbFrequency
+ #define CpuSrvcGetNbPstateInfo F16KbGetNbPstateInfo
+ #define CpuSrvcIsNbCofInitNeeded F16GetNbCofVidUpdate
+ #define CpuSrvcGetNbIddMax F16KbGetNbIddMax
+ #define CpuSrvcLaunchApCore F16LaunchApCore
+ #define CpuSrvcGetNumberOfPhysicalCores F16KbGetNumberOfPhysicalCores
+ #define CpuSrvcGetApMailboxFromHardware F16KbGetApMailboxFromHardware
+ #define CpuSrvcGetApCoreNumber F16KbGetApCoreNumber
+ #define CpuSrvcCoreIdPositionInInitialApicId F16CpuAmdCoreIdPositionInInitialApicId
+ #define CpuSrvcSetWarmResetFlag F16SetAgesaWarmResetFlag
+ #define CpuSrvcGetWarmResetFlag F16GetAgesaWarmResetFlag
+ #define CpuSrvcGetMicroCodePatchesStruct GetF16KbMicroCodePatchesStruct
+ #define CpuSrvcGetMicrocodeEquivalenceTable GetF16KbMicrocodeEquivalenceTable
+ #define CpuSrvcGetCacheInfo GetF16CacheInfo
+ #define CpuSrvcGetSysPmTableStruct GetF16KbSysPmTable
+ #define CpuSrvcGetWheaInitData GetF16WheaInitData
+ #define CpuSrvcIsNbPstateEnabled F16KbIsNbPstateEnabled
+ #define CpuSrvcRegisterTableList (REGISTER_TABLE **) F16KbRegisterTables
+ #define CpuSrvcTableEntryTypeDescriptors (TABLE_ENTRY_TYPE_DESCRIPTOR *) F16KbTableEntryTypeDescriptors
+ #define CpuSrvcComputeUnitMap (COMPUTE_UNIT_MAP *) &HtFam16KbComputeUnitMapping
+ #define CpuSrvcInitCacheDisabled InitCacheEnabled
+ #define CpuSrvcGetEarlyInitBeforeApLaunchOnCoreTable GetF16KbEarlyInitBeforeApLaunchOnCoreTable
+ #define CpuSrvcGetEarlyInitAfterApLaunchOnCoreTable GetF16KbEarlyInitAfterApLaunchOnCoreTable
+ #define CpuSrvcPatchLoaderIsSharedByCU FALSE
+
+ #include "OptionCpuSpecificServicesInstall.h"
+ INSTALL_CPU_SPECIFIC_SERVICES_TABLE (CpuSrvcTableName);
+
+ #define KB_SOCKETS 1
+ #define KB_MODULES 1
+ #define KB_RECOVERY_SOCKETS 1
+ #define KB_RECOVERY_MODULES 1
+ extern F_CPU_GET_SUBFAMILY_ID_ARRAY GetF16KbLogicalIdAndRev;
+ #define OPT_F16_KB_ID (PF_CPU_GET_SUBFAMILY_ID_ARRAY) GetF16KbLogicalIdAndRev,
+ #ifndef ADVCFG_PLATFORM_SOCKETS
+ #define ADVCFG_PLATFORM_SOCKETS KB_SOCKETS
+ #else
+ #if ADVCFG_PLATFORM_SOCKETS < KB_SOCKETS
+ #undef ADVCFG_PLATFORM_SOCKETS
+ #define ADVCFG_PLATFORM_SOCKETS KB_SOCKETS
+ #endif
+ #endif
+ #ifndef ADVCFG_PLATFORM_MODULES
+ #define ADVCFG_PLATFORM_MODULES KB_MODULES
+ #else
+ #if ADVCFG_PLATFORM_MODULES < KB_MODULES
+ #undef ADVCFG_PLATFORM_MODULES
+ #define ADVCFG_PLATFORM_MODULES KB_MODULES
+ #endif
+ #endif
+
+ #if (AGESA_ENTRY_INIT_RECOVERY == TRUE) || (AGESA_ENTRY_INIT_EARLY == TRUE)
+ #define F16_KB_UCODE_002A
+ #define F16_KB_UCODE_0106
+
+ #if AGESA_ENTRY_INIT_EARLY == TRUE
+ #if OPTION_EARLY_SAMPLES == TRUE
+ #endif
+ extern CONST UINT8 ROMDATA arr1[];
+ #undef F16_KB_UCODE_002A
+ #define F16_KB_UCODE_002A arr1,
+
+ extern CONST UINT8 ROMDATA arr2[];
+ #undef F16_KB_UCODE_0106
+ #define F16_KB_UCODE_0106 arr2,
+ #endif
+
+ CONST UINT8 ROMDATA *CpuF16KbMicroCodePatchArray[] =
+ {
+ F16_KB_UCODE_0106
+ F16_KB_UCODE_002A
+ NULL
+ };
+
+ CONST UINT8 ROMDATA CpuF16KbNumberOfMicrocodePatches = (UINT8) ((sizeof (CpuF16KbMicroCodePatchArray) / sizeof (CpuF16KbMicroCodePatchArray[0])) - 1);
+ #endif
+
+ #define OPT_F16_KB_CPU {AMD_FAMILY_16_KB, &cpuF16KbServices},
+
+ #else // OPTION_FAMILY16H_KB == TRUE
+ #define OPT_F16_KB_CPU
+ #define OPT_F16_KB_ID
+ #endif // OPTION_FAMILY16H_KB == TRUE
+#else // defined (OPTION_FAMILY16H_KB)
+ #define OPT_F16_KB_CPU
+ #define OPT_F16_KB_ID
+#endif // defined (OPTION_FAMILY16H_KB)
+
+
+/*
+ * Install unknown family 16h support
+ */
+
+
+#if USES_REGISTER_TABLES == TRUE
+ extern CONST REGISTER_TABLE ROMDATA F16PciUnknownRegisterTable;
+ extern CONST REGISTER_TABLE ROMDATA F16MsrUnknownRegisterTable;
+ CONST REGISTER_TABLE ROMDATA *F16UnknownRegisterTables[] =
+ {
+ &F16PciUnknownRegisterTable,
+ &F16MsrUnknownRegisterTable
+ // the end.
+ };
+#endif
+
+#if USES_REGISTER_TABLES == TRUE
+ CONST TABLE_ENTRY_TYPE_DESCRIPTOR ROMDATA F16UnknownTableEntryTypeDescriptors[] =
+ {
+ {MsrRegister, SetRegisterForMsrEntry},
+ {PciRegister, SetRegisterForPciEntry},
+ // End
+ {TableEntryTypeMax, (PF_DO_TABLE_ENTRY)CommonVoid}
+ };
+#endif
+
+
+
+#include "OptionCpuSpecificServicesInstallReset.h"
+#define CpuSrvcTableName cpuF16UnknownServices
+
+#define CpuSrvcDisablePstate F16DisablePstate
+#define CpuSrvcTransitionPstate F16TransitionPstate
+#define CpuSrvcGetTscRate F16GetTscRate
+#define CpuSrvcLaunchApCore F16LaunchApCore
+#define CpuSrvcCoreIdPositionInInitialApicId F16CpuAmdCoreIdPositionInInitialApicId
+#define CpuSrvcSetWarmResetFlag F16SetAgesaWarmResetFlag
+#define CpuSrvcGetWarmResetFlag F16GetAgesaWarmResetFlag
+#define CpuSrvcGetMicroCodePatchesStruct GetEmptyArray
+#define CpuSrvcGetMicrocodeEquivalenceTable GetEmptyArray
+#define CpuSrvcGetWheaInitData GetF16WheaInitData
+#define CpuSrvcIsNbPstateEnabled F16IsNbPstateEnabled
+#define CpuSrvcRegisterTableList (REGISTER_TABLE **) F16UnknownRegisterTables
+#define CpuSrvcTableEntryTypeDescriptors (TABLE_ENTRY_TYPE_DESCRIPTOR *) F16UnknownTableEntryTypeDescriptors
+#define CpuSrvcInitCacheDisabled InitCacheEnabled
+#define CpuSrvcPatchLoaderIsSharedByCU FALSE
+
+#include "OptionCpuSpecificServicesInstall.h"
+INSTALL_CPU_SPECIFIC_SERVICES_TABLE (CpuSrvcTableName);
+
+// Family 16h maximum base address is 40 bits. Limit BLDCFG to 40 bits, if appropriate.
+
+#if (FAMILY_MMIO_BASE_MASK < 0xFFFFFF0000000000ull)
+
+ #undef FAMILY_MMIO_BASE_MASK
+
+ #define FAMILY_MMIO_BASE_MASK (0xFFFFFF0000000000ull)
+
+#endif
+
+
+
+#undef OPT_F16_ID_TABLE
+
+#define OPT_F16_ID_TABLE {0x16, {AMD_FAMILY_16, AMD_F16_UNKNOWN}, F16LogicalIdTable, (sizeof (F16LogicalIdTable) / sizeof (F16LogicalIdTable[0]))},
+
+#define OPT_F16_UNKNOWN_CPU {AMD_FAMILY_16, &cpuF16UnknownServices},
+
+
+#undef OPT_F16_TABLE
+
+#define OPT_F16_TABLE OPT_F16_KB_CPU OPT_F16_UNKNOWN_CPU
+
+
+
+CONST PF_CPU_GET_SUBFAMILY_ID_ARRAY ROMDATA F16LogicalIdTable[] =
+
+{
+
+ OPT_F16_KB_ID
+
+};
+
+
+#endif // _OPTION_FAMILY_16H_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionFchInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionFchInstall.h
new file mode 100644
index 0000000..4c927af
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionFchInstall.h
@@ -0,0 +1,1026 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of family 15h support
+ *
+ * This file generates the defaults tables for family 15h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+
+#ifndef _OPTION_FCH_INSTALL_H_
+#define _OPTION_FCH_INSTALL_H_
+
+#include "AmdFch.h"
+
+#ifndef FCH_SUPPORT
+ #define FCH_SUPPORT FALSE
+#endif
+
+
+/* ACPI block register offset definitions */
+#define PM1_STATUS_OFFSET 0x00
+#define PM1_ENABLE_OFFSET 0x02
+#define PM_CONTROL_OFFSET 0x04
+#define PM_TIMER_OFFSET 0x08
+#define CPU_CONTROL_OFFSET 0x10
+#define EVENT_STATUS_OFFSET 0x20
+#define EVENT_ENABLE_OFFSET 0x24
+
+
+#if FCH_SUPPORT == TRUE
+ /*
+ * FCH subfunctions
+ */
+ #ifdef AGESA_ENTRY_INIT_RESET
+ #if AGESA_ENTRY_INIT_RESET == TRUE
+ extern FCH_TASK_ENTRY FchInitResetHwAcpiP;
+ extern FCH_TASK_ENTRY FchInitResetHwAcpi;
+ extern FCH_TASK_ENTRY FchInitResetAb;
+ extern FCH_TASK_ENTRY FchInitResetSpi;
+ extern FCH_TASK_ENTRY FchInitResetGec;
+ extern FCH_TASK_ENTRY FchInitResetSata;
+ extern FCH_TASK_ENTRY FchInitResetLpc;
+ extern FCH_TASK_ENTRY FchInitResetPcib;
+ extern FCH_TASK_ENTRY FchInitResetPcie;
+ extern FCH_TASK_ENTRY FchInitResetGpp;
+ extern FCH_TASK_ENTRY FchInitAllinoneGpp;
+ extern FCH_TASK_ENTRY FchInitResetUsb;
+ extern FCH_TASK_ENTRY FchInitResetEhci;
+ extern FCH_TASK_ENTRY FchInitResetOhci;
+ extern FCH_TASK_ENTRY FchInitResetXhci;
+ extern FCH_TASK_ENTRY FchInitResetImc;
+ #endif
+ #endif
+
+ #ifdef AGESA_ENTRY_INIT_ENV
+ #if AGESA_ENTRY_INIT_ENV == TRUE
+ extern FCH_TASK_ENTRY FchInitEnvUsbXhci;
+ extern FCH_TASK_ENTRY FchInitEnvUsbOhci;
+ extern FCH_TASK_ENTRY FchInitEnvUsbEhci;
+ extern FCH_TASK_ENTRY FchInitEnvUsb;
+ extern FCH_TASK_ENTRY FchInitEnvAb;
+ extern FCH_TASK_ENTRY FchInitEnvGpp;
+ extern FCH_TASK_ENTRY FchInitEnvGppPhaseII;
+ extern FCH_TASK_ENTRY FchInitEnvPcie;
+ extern FCH_TASK_ENTRY FchInitEnvPcib;
+ extern FCH_TASK_ENTRY FchInitEnvHwAcpiP;
+ extern FCH_TASK_ENTRY FchInitEnvHwAcpi;
+ extern FCH_TASK_ENTRY FchInitEnvAbSpecial;
+ extern FCH_TASK_ENTRY FchInitEnvSpi;
+ extern FCH_TASK_ENTRY FchInitEnvGec;
+ extern FCH_TASK_ENTRY FchInitEnvSata;
+ extern FCH_TASK_ENTRY FchInitEnvIde;
+ extern FCH_TASK_ENTRY FchInitEnvSd;
+ extern FCH_TASK_ENTRY FchInitEnvIr;
+ extern FCH_TASK_ENTRY FchInitEnvAzalia;
+ extern FCH_TASK_ENTRY FchInitEnvHwm;
+ extern FCH_TASK_ENTRY FchInitEnvImc;
+ #endif
+ #endif
+
+ #ifdef AGESA_ENTRY_INIT_MID
+ #if AGESA_ENTRY_INIT_MID == TRUE
+ extern FCH_TASK_ENTRY FchInitMidHwm;
+ extern FCH_TASK_ENTRY FchInitMidAzalia;
+ extern FCH_TASK_ENTRY FchInitMidGec;
+ extern FCH_TASK_ENTRY FchInitMidSata;
+ extern FCH_TASK_ENTRY FchInitMidIde;
+ extern FCH_TASK_ENTRY FchInitMidAb;
+ extern FCH_TASK_ENTRY FchInitMidUsb;
+ extern FCH_TASK_ENTRY FchInitMidUsbEhci;
+ extern FCH_TASK_ENTRY FchInitMidUsbOhci;
+ extern FCH_TASK_ENTRY FchInitMidUsbXhci;
+ extern FCH_TASK_ENTRY FchInitMidImc;
+ #endif
+ #endif
+
+ #ifdef AGESA_ENTRY_INIT_LATE
+ #if AGESA_ENTRY_INIT_LATE == TRUE
+ extern FCH_TASK_ENTRY FchInitLateHwAcpi;
+ extern FCH_TASK_ENTRY FchInitLateSpi;
+ extern FCH_TASK_ENTRY FchInitLateGec;
+ extern FCH_TASK_ENTRY FchInitLateSata;
+ extern FCH_TASK_ENTRY FchInitLateIde;
+ extern FCH_TASK_ENTRY FchInitLatePcib;
+ extern FCH_TASK_ENTRY FchInitLateAb;
+ extern FCH_TASK_ENTRY FchInitLatePcie;
+ extern FCH_TASK_ENTRY FchInitLateGpp;
+ extern FCH_TASK_ENTRY FchInitLateUsb;
+ extern FCH_TASK_ENTRY FchInitLateUsbEhci;
+ extern FCH_TASK_ENTRY FchInitLateUsbOhci;
+ extern FCH_TASK_ENTRY FchInitLateUsbXhci;
+ extern FCH_TASK_ENTRY FchInitLateImc;
+ extern FCH_TASK_ENTRY FchInitLateAzalia;
+ extern FCH_TASK_ENTRY FchInitLateHwm;
+ #endif
+ #endif
+
+ extern FCH_TASK_ENTRY FchTaskDummy;
+ extern FCH_TASK_ENTRY FchGppHotplugSmiCallback;
+ /* FCH Interface entries */
+ extern FCH_INIT CommonFchInitStub;
+
+ /* FCH Interface entries */
+ #ifdef AGESA_ENTRY_INIT_RESET
+ #if AGESA_ENTRY_INIT_RESET == TRUE
+ extern FCH_INIT FchInitReset;
+ extern FCH_INIT FchResetConstructor;
+
+ #define FP_FCH_INIT_RESET &FchInitReset
+ #define FP_FCH_INIT_RESET_CONSTRUCT &FchResetConstructor
+ #else
+ #define FP_FCH_INIT_RESET &CommonFchInitStub
+ #define FP_FCH_INIT_RESET_CONSTRUCT &CommonFchInitStub
+ #endif
+ #endif
+
+ #ifdef AGESA_ENTRY_INIT_ENV
+ #if AGESA_ENTRY_INIT_ENV == TRUE
+ extern FCH_INIT FchInitEnv;
+ extern FCH_INIT FchEnvConstructor;
+
+ #define FP_FCH_INIT_ENV &FchInitEnv
+ #define FP_FCH_INIT_ENV_CONSTRUCT &FchEnvConstructor
+ #else
+ #define FP_FCH_INIT_ENV &CommonFchInitStub
+ #define FP_FCH_INIT_ENV_CONSTRUCT &CommonFchInitStub
+ #endif
+ #endif
+
+ #ifdef AGESA_ENTRY_INIT_MID
+ #if AGESA_ENTRY_INIT_MID == TRUE
+ extern FCH_INIT FchInitMid;
+ extern FCH_INIT FchMidConstructor;
+
+ #define FP_FCH_INIT_MID &FchInitMid
+ #define FP_FCH_INIT_MID_CONSTRUCT &FchMidConstructor
+ #else
+ #define FP_FCH_INIT_MID &CommonFchInitStub
+ #define FP_FCH_INIT_MID_CONSTRUCT &CommonFchInitStub
+ #endif
+ #endif
+
+ #ifdef AGESA_ENTRY_INIT_LATE
+ #if AGESA_ENTRY_INIT_LATE == TRUE
+ extern FCH_INIT FchInitLate;
+ extern FCH_INIT FchLateConstructor;
+
+ #define FP_FCH_INIT_LATE &FchInitLate
+ #define FP_FCH_INIT_LATE_CONSTRUCT &FchLateConstructor
+ #else
+ #define FP_FCH_INIT_LATE &CommonFchInitStub
+ #define FP_FCH_INIT_LATE_CONSTRUCT &CommonFchInitStub
+ #endif
+ #endif
+
+ /* FCH subcomponent build options */
+ #undef FCH_NO_HWACPI_SUPPORT
+ #undef FCH_NO_AB_SUPPORT
+ #undef FCH_NO_SPI_SUPPORT
+ #undef FCH_NO_GEC_SUPPORT
+ #undef FCH_NO_SATA_SUPPORT
+ #undef FCH_NO_IDE_SUPPORT
+ #undef FCH_NO_LPC_SUPPORT
+ #undef FCH_NO_PCIB_SUPPORT
+ #undef FCH_NO_PCIE_SUPPORT
+ #undef FCH_NO_GPP_SUPPORT
+ #undef FCH_NO_USB_SUPPORT
+ #undef FCH_NO_EHCI_SUPPORT
+ #undef FCH_NO_OHCI_SUPPORT
+ #undef FCH_NO_XHCI_SUPPORT
+ #undef FCH_NO_IMC_SUPPORT
+ #undef FCH_NO_SD_SUPPORT
+ #undef FCH_NO_IR_SUPPORT
+ #undef FCH_NO_AZALIA_SUPPORT
+ #undef FCH_NO_HWM_SUPPORT
+
+ #define FCH_NO_GEC_SUPPORT TRUE
+
+ // Following are determined by silicon characteristics
+ #if (FALSE)
+ #define FCH_NO_GPP_SUPPORT TRUE
+ #define FCH_NO_PCIB_SUPPORT TRUE
+ #define FCH_NO_PCIE_SUPPORT TRUE
+
+ //#define FCH_NO_GEC_SUPPORT TRUE
+ #elif (OPTION_FAMILY15H_TN == TRUE)
+ //#define FCH_NO_GEC_SUPPORT TRUE
+ #elif (OPTION_FAMILY16H_MODEL_0x == TRUE)
+ #define FCH_NO_GPP_SUPPORT TRUE
+ #define FCH_NO_PCIB_SUPPORT TRUE
+ #define FCH_NO_PCIE_SUPPORT TRUE
+ #else
+ #error FCH_SUPPORT: No chip type selected.
+ #endif
+
+
+ //
+ // Installable blocks depending on build switches
+ //
+ #ifndef FCH_NO_HWACPI_SUPPORT
+ #define BLOCK_HWACPI_SIZE sizeof (FCH_ACPI)
+ #define InstallFchInitResetHwAcpiP &FchInitResetHwAcpiP
+ #define InstallFchInitResetHwAcpi &FchInitResetHwAcpi
+ #define InstallFchInitEnvHwAcpiP &FchInitEnvHwAcpiP
+ #define InstallFchInitEnvHwAcpi &FchInitEnvHwAcpi
+ #define InstallFchInitMidHwAcpi &FchTaskDummy
+ #define InstallFchInitLateHwAcpi &FchInitLateHwAcpi
+ #else
+ #define BLOCK_HWACPI_SIZE 0
+ #define InstallFchInitResetHwAcpiP &FchTaskDummy
+ #define InstallFchInitResetHwAcpi &FchTaskDummy
+ #define InstallFchInitEnvHwAcpi &FchTaskDummy
+ #define InstallFchInitMidHwAcpi &FchTaskDummy
+ #define InstallFchInitLateHwAcpi &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_AB_SUPPORT
+ #define BLOCK_AB_SIZE sizeof (FCH_AB)
+ #define InstallFchInitResetAb &FchInitResetAb
+ #define InstallFchInitEnvAb &FchInitEnvAb
+ #define InstallFchInitEnvAbS &FchInitEnvAbSpecial
+ #define InstallFchInitMidAb &FchInitMidAb
+ #define InstallFchInitLateAb &FchInitLateAb
+ #else
+ #define BLOCK_AB_SIZE 0
+ #define InstallFchInitResetAb &FchTaskDummy
+ #define InstallFchInitEnvAb &FchTaskDummy
+ #define InstallFchInitEnvAbS &FchTaskDummy
+ #define InstallFchInitMidAb &FchTaskDummy
+ #define InstallFchInitLateAb &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_SPI_SUPPORT
+ #define BLOCK_SPI_SIZE sizeof (FCH_SPI)
+ #define InstallFchInitResetSpi &FchInitResetSpi
+ #define InstallFchInitEnvSpi &FchInitEnvSpi
+ #define InstallFchInitMidSpi &FchTaskDummy
+ #define InstallFchInitLateSpi &FchInitLateSpi
+ #else
+ #define BLOCK_SPI_SIZE 0
+ #define InstallFchInitResetSpi &FchTaskDummy
+ #define InstallFchInitEnvSpi &FchTaskDummy
+ #define InstallFchInitMidSpi &FchTaskDummy
+ #define InstallFchInitLateSpi &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_GEC_SUPPORT
+ #define BLOCK_GEC_SIZE sizeof (FCH_GEC)
+ #define InstallFchInitResetGec &FchInitResetGec
+ #define InstallFchInitEnvGec &FchInitEnvGec
+ #define InstallFchInitMidGec &FchInitMidGec
+ #define InstallFchInitLateGec &FchInitLateGec
+ #else
+ #define BLOCK_GEC_SIZE 0
+ #define InstallFchInitResetGec &FchTaskDummy
+ #define InstallFchInitEnvGec &FchTaskDummy
+ #define InstallFchInitMidGec &FchTaskDummy
+ #define InstallFchInitLateGec &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_SATA_SUPPORT
+ #define BLOCK_SATA_SIZE sizeof (FCH_SATA)
+ #define InstallFchInitResetSata &FchInitResetSata
+ #define InstallFchInitEnvSata &FchInitEnvSata
+ #define InstallFchInitMidSata &FchInitMidSata
+ #define InstallFchInitLateSata &FchInitLateSata
+ #else
+ #define BLOCK_SATA_SIZE 0
+ #define InstallFchInitResetSata &FchTaskDummy
+ #define InstallFchInitEnvSata &FchTaskDummy
+ #define InstallFchInitMidSata &FchTaskDummy
+ #define InstallFchInitLateSata &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_IDE_SUPPORT
+ #define BLOCK_IDE_SIZE sizeof (FCH_IDE)
+ #define InstallFchInitResetIde &FchTaskDummy
+ #define InstallFchInitEnvIde &FchInitEnvIde
+ #define InstallFchInitMidIde &FchInitMidIde
+ #define InstallFchInitLateIde &FchInitLateIde
+ #else
+ #define BLOCK_IDE_SIZE 0
+ #define InstallFchInitResetIde &FchTaskDummy
+ #define InstallFchInitEnvIde &FchTaskDummy
+ #define InstallFchInitMidIde &FchTaskDummy
+ #define InstallFchInitLateIde &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_LPC_SUPPORT
+ #define BLOCK_LPC_SIZE sizeof (FCH_LPC)
+ #define InstallFchInitResetLpc &FchInitResetLpc
+ #define InstallFchInitEnvLpc &FchTaskDummy
+ #define InstallFchInitMidLpc &FchTaskDummy
+ #define InstallFchInitLateLpc &FchTaskDummy
+ #else
+ #define BLOCK_LPC_SIZE 0
+ #define InstallFchInitResetLpc &FchTaskDummy
+ #define InstallFchInitEnvLpc &FchTaskDummy
+ #define InstallFchInitMidLpc &FchTaskDummy
+ #define InstallFchInitLateLpc &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_PCIB_SUPPORT
+ #define BLOCK_PCIB_SIZE sizeof (FCH_PCIB)
+ #define InstallFchInitResetPcib &FchInitResetPcib
+ #define InstallFchInitEnvPcib &FchInitEnvPcib
+ #define InstallFchInitMidPcib &FchTaskDummy
+ #define InstallFchInitLatePcib &FchInitLatePcib
+ #else
+ #define BLOCK_PCIB_SIZE 0
+ #define InstallFchInitResetPcib &FchTaskDummy
+ #define InstallFchInitEnvPcib &FchTaskDummy
+ #define InstallFchInitMidPcib &FchTaskDummy
+ #define InstallFchInitLatePcib &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_PCIE_SUPPORT
+ #define InstallFchInitResetPcie &FchInitResetPcie
+ #define InstallFchInitEnvPcie &FchInitEnvPcie
+ #define InstallFchInitMidPcie &FchTaskDummy
+ #define InstallFchInitLatePcie &FchInitLatePcie
+ #else
+ #define InstallFchInitResetPcie &FchTaskDummy
+ #define InstallFchInitEnvPcie &FchTaskDummy
+ #define InstallFchInitMidPcie &FchTaskDummy
+ #define InstallFchInitLatePcie &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_GPP_SUPPORT
+ #define BLOCK_GPP_SIZE sizeof (FCH_GPP)
+ #define InstallFchInitResetGpp &FchInitResetGpp
+ #define InstallFchInitAllinoneGPP &FchTaskDummy
+ #define InstallFchInitEnvGpp &FchInitEnvGpp
+ #define InstallFchInitEnvGppPhaseII &FchInitEnvGppPhaseII
+ #define InstallFchInitMidGpp &FchTaskDummy
+ #define InstallFchInitLateGpp &FchInitLateGpp
+ #define InstallHpSmiCallback &FchGppHotplugSmiCallback
+ #else
+ #define BLOCK_GPP_SIZE 0
+ #define InstallFchInitResetGpp &FchTaskDummy
+ #define InstallFchInitAllinoneGPP &FchTaskDummy
+ #define InstallFchInitEnvGpp &FchTaskDummy
+ #define InstallFchInitEnvGppPhaseII &FchTaskDummy
+ #define InstallFchInitMidGpp &FchTaskDummy
+ #define InstallFchInitLateGpp &FchTaskDummy
+ #define InstallHpSmiCallback &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_USB_SUPPORT
+ #define BLOCK_USB_SIZE sizeof (FCH_USB)
+ #define InstallFchInitResetUsb &FchInitResetUsb
+ #define InstallFchInitEnvUsb &FchInitEnvUsb
+ #define InstallFchInitMidUsb &FchInitMidUsb
+ #define InstallFchInitLateUsb &FchInitLateUsb
+ #else
+ #define BLOCK_USB_SIZE 0
+ #define InstallFchInitResetUsb &FchTaskDummy
+ #define InstallFchInitEnvUsb &FchTaskDummy
+ #define InstallFchInitMidUsb &FchTaskDummy
+ #define InstallFchInitLateUsb &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_EHCI_SUPPORT
+ #define InstallFchInitResetUsbEhci &FchInitResetEhci
+ #define InstallFchInitEnvUsbEhci &FchInitEnvUsbEhci
+ #define InstallFchInitMidUsbEhci &FchInitMidUsbEhci
+ #define InstallFchInitLateUsbEhci &FchInitLateUsbEhci
+ #else
+ #define InstallFchInitResetUsbEhci &FchTaskDummy
+ #define InstallFchInitEnvUsbEhci &FchTaskDummy
+ #define InstallFchInitMidUsbEhci &FchTaskDummy
+ #define InstallFchInitLateUsbEhci &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_OHCI_SUPPORT
+ #define InstallFchInitResetUsbOhci &FchInitResetOhci
+ #define InstallFchInitEnvUsbOhci &FchInitEnvUsbOhci
+ #define InstallFchInitMidUsbOhci &FchInitMidUsbOhci
+ #define InstallFchInitLateUsbOhci &FchInitLateUsbOhci
+ #else
+ #define InstallFchInitResetUsbOhci &FchTaskDummy
+ #define InstallFchInitEnvUsbOhci &FchTaskDummy
+ #define InstallFchInitMidUsbOhci &FchTaskDummy
+ #define InstallFchInitLateUsbOhci &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_XHCI_SUPPORT
+ #define InstallFchInitResetUsbXhci &FchInitResetXhci
+ #define InstallFchInitEnvUsbXhci &FchInitEnvUsbXhci
+ #define InstallFchInitMidUsbXhci &FchInitMidUsbXhci
+ #define InstallFchInitLateUsbXhci &FchInitLateUsbXhci
+ #else
+ #define InstallFchInitResetUsbXhci &FchTaskDummy
+ #define InstallFchInitEnvUsbXhci &FchTaskDummy
+ #define InstallFchInitMidUsbXhci &FchTaskDummy
+ #define InstallFchInitLateUsbXhci &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_IMC_SUPPORT
+ #define BLOCK_IMC_SIZE sizeof (FCH_IMC)
+ #define InstallFchInitResetImc &FchInitResetImc
+ #define InstallFchInitEnvImc &FchInitEnvImc
+ #define InstallFchInitMidImc &FchInitMidImc
+ #define InstallFchInitLateImc &FchInitLateImc
+ #else
+ #define BLOCK_IMC_SIZE 0
+ #define InstallFchInitResetImc &FchTaskDummy
+ #define InstallFchInitEnvImc &FchTaskDummy
+ #define InstallFchInitMidImc &FchTaskDummy
+ #define InstallFchInitLateImc &FchTaskDummy
+ #endif
+
+
+ #ifndef FCH_NO_SD_SUPPORT
+ #define BLOCK_SD_SIZE sizeof (FCH_SD)
+ #define InstallFchInitResetSd &FchTaskDummy
+ #define InstallFchInitEnvSd &FchInitEnvSd
+ #define InstallFchInitMidSd &FchTaskDummy
+ #define InstallFchInitLateSd &FchTaskDummy
+ #else
+ #define BLOCK_SD_SIZE 0
+ #define InstallFchInitResetSd &FchTaskDummy
+ #define InstallFchInitEnvSd &FchTaskDummy
+ #define InstallFchInitMidSd &FchTaskDummy
+ #define InstallFchInitLateSd &FchTaskDummy
+ #endif
+
+ #define BLOCK_IR_SIZE 0
+ #define InstallFchInitResetIr &FchTaskDummy
+ #define InstallFchInitEnvIr &FchTaskDummy
+ #define InstallFchInitMidIr &FchTaskDummy
+ #define InstallFchInitLateIr &FchTaskDummy
+
+ #ifndef FCH_NO_AZALIA_SUPPORT
+ #define BLOCK_AZALIA_SIZE sizeof (FCH_AZALIA)
+ #define InstallFchInitResetAzalia &FchTaskDummy
+ #define InstallFchInitEnvAzalia &FchInitEnvAzalia
+ #define InstallFchInitMidAzalia &FchInitMidAzalia
+ #define InstallFchInitLateAzalia &FchInitLateAzalia
+ #else
+ #define BLOCK_AZALIA_SIZE 0
+ #define InstallFchInitResetAzalia &FchTaskDummy
+ #define InstallFchInitEnvAzalia &FchTaskDummy
+ #define InstallFchInitMidAzalia &FchTaskDummy
+ #define InstallFchInitLateAzalia &FchTaskDummy
+ #endif
+
+ #ifndef FCH_NO_HWM_SUPPORT
+ #define BLOCK_HWM_SIZE sizeof (FCH_HWM)
+ #define InstallFchInitResetHwm &FchTaskDummy
+ #define InstallFchInitEnvHwm &FchTaskDummy
+ #define InstallFchInitMidHwm &FchTaskDummy
+ #define InstallFchInitLateHwm &FchInitLateHwm
+ #else
+ #define InstallFchInitResetHwm &FchTaskDummy
+ #define InstallFchInitEnvHwm &FchTaskDummy
+ #define InstallFchInitMidHwm &FchTaskDummy
+ #define InstallFchInitLateHwm &FchTaskDummy
+ #endif
+
+
+ #define BLOCK_SMBUS_SIZE sizeof (FCH_SMBUS)
+ #define BLOCK_HPET_SIZE sizeof (FCH_HPET)
+ #define BLOCK_GCPU_SIZE sizeof (FCH_GCPU)
+ #define BLOCK_SDB_SIZE sizeof (FCH_SERIALDB)
+ #define BLOCK_MISC_SIZE sizeof (FCH_MISC)
+
+
+ // Optionally declare OEM hooks after each phase
+ #ifndef FCH_INIT_RESET_HOOK
+ #define InstallFchInitResetHook FchTaskDummy
+ #else
+ #define InstallFchInitResetHook OemFchInitResetHook
+ #endif
+
+
+ //
+ // Define FCH build time options and configurations
+ //
+ #ifdef BLDCFG_SMBUS0_BASE_ADDRESS
+ #define CFG_SMBUS0_BASE_ADDRESS BLDCFG_SMBUS0_BASE_ADDRESS
+ #else
+ #define CFG_SMBUS0_BASE_ADDRESS DFLT_SMBUS0_BASE_ADDRESS
+ #endif
+
+ #ifdef BLDCFG_SMBUS1_BASE_ADDRESS
+ #define CFG_SMBUS1_BASE_ADDRESS BLDCFG_SMBUS1_BASE_ADDRESS
+ #else
+ #define CFG_SMBUS1_BASE_ADDRESS DFLT_SMBUS1_BASE_ADDRESS
+ #endif
+
+ #ifdef BLDCFG_SIO_PME_BASE_ADDRESS
+ #define CFG_SIO_PME_BASE_ADDRESS BLDCFG_SIO_PME_BASE_ADDRESS
+ #else
+ #define CFG_SIO_PME_BASE_ADDRESS DFLT_SIO_PME_BASE_ADDRESS
+ #endif
+
+ #ifdef BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS
+ #define CFG_ACPI_PM1_EVT_BLOCK_ADDRESS BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS
+ #else
+ #define CFG_ACPI_PM1_EVT_BLOCK_ADDRESS DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS
+ #endif
+ #ifdef BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS
+ #define CFG_ACPI_PM1_CNT_BLOCK_ADDRESS BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS
+ #else
+ #define CFG_ACPI_PM1_CNT_BLOCK_ADDRESS DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS
+ #endif
+ #ifdef BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS
+ #define CFG_ACPI_PM_TMR_BLOCK_ADDRESS BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS
+ #else
+ #define CFG_ACPI_PM_TMR_BLOCK_ADDRESS DFLT_ACPI_PM_TMR_BLOCK_ADDRESS
+ #endif
+ #ifdef BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS
+ #define CFG_ACPI_CPU_CNT_BLOCK_ADDRESS BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS
+ #else
+ #define CFG_ACPI_CPU_CNT_BLOCK_ADDRESS DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS
+ #endif
+ #ifdef BLDCFG_ACPI_GPE0_BLOCK_ADDRESS
+ #define CFG_ACPI_GPE0_BLOCK_ADDRESS BLDCFG_ACPI_GPE0_BLOCK_ADDRESS
+ #else
+ #define CFG_ACPI_GPE0_BLOCK_ADDRESS DFLT_ACPI_GPE0_BLOCK_ADDRESS
+ #endif
+
+
+ #ifdef BLDCFG_WATCHDOG_TIMER_BASE
+ #define CFG_WATCHDOG_TIMER_BASE BLDCFG_WATCHDOG_TIMER_BASE
+ #else
+ #define CFG_WATCHDOG_TIMER_BASE DFLT_WATCHDOG_TIMER_BASE_ADDRESS
+ #endif
+
+ #ifdef BLDCFG_ACPI_PMA_BLK_ADDRESS
+ #define CFG_ACPI_PMA_CNTBLK_ADDRESS BLDCFG_ACPI_PMA_BLK_ADDRESS
+ #else
+ #define CFG_ACPI_PMA_CNTBLK_ADDRESS DFLT_ACPI_PMA_CNT_BLK_ADDRESS
+ #endif
+
+ #ifdef BLDCFG_SMI_CMD_PORT_ADDRESS
+ #define CFG_SMI_CMD_PORT_ADDRESS BLDCFG_SMI_CMD_PORT_ADDRESS
+ #else
+ #define CFG_SMI_CMD_PORT_ADDRESS DFLT_SMI_CMD_PORT
+ #endif
+
+ #ifdef BLDCFG_ROM_BASE_ADDRESS
+ #define CFG_SPI_ROM_BASE_ADDRESS BLDCFG_ROM_BASE_ADDRESS
+ #else
+ #define CFG_SPI_ROM_BASE_ADDRESS DFLT_SPI_BASE_ADDRESS
+ #endif
+
+ #ifdef BLDCFG_GEC_SHADOW_ROM_BASE
+ #define CFG_GEC_SHADOW_ROM_BASE BLDCFG_GEC_SHADOW_ROM_BASE
+ #else
+ #define CFG_GEC_SHADOW_ROM_BASE DFLT_GEC_BASE_ADDRESS
+ #endif
+
+ #ifdef BLDCFG_HPET_BASE_ADDRESS
+ #define CFG_HPET_BASE_ADDRESS BLDCFG_HPET_BASE_ADDRESS
+ #else
+ #define CFG_HPET_BASE_ADDRESS DFLT_HPET_BASE_ADDRESS
+ #endif
+
+ #ifdef BLDCFG_AZALIA_SSID
+ #define CFG_AZALIA_SSID BLDCFG_AZALIA_SSID
+ #else
+ #define CFG_AZALIA_SSID DFLT_AZALIA_SSID
+ #endif
+
+ #ifdef BLDCFG_SMBUS_SSID
+ #define CFG_SMBUS_SSID BLDCFG_SMBUS_SSID
+ #else
+ #define CFG_SMBUS_SSID DFLT_SMBUS_SSID
+ #endif
+
+ #ifdef BLDCFG_IDE_SSID
+ #define CFG_IDE_SSID BLDCFG_IDE_SSID
+ #else
+ #define CFG_IDE_SSID DFLT_IDE_SSID
+ #endif
+
+ #ifdef BLDCFG_SATA_AHCI_SSID
+ #define CFG_SATA_AHCI_SSID BLDCFG_SATA_AHCI_SSID
+ #else
+ #define CFG_SATA_AHCI_SSID DFLT_SATA_AHCI_SSID
+ #endif
+
+ #ifdef BLDCFG_SATA_IDE_SSID
+ #define CFG_SATA_IDE_SSID BLDCFG_SATA_IDE_SSID
+ #else
+ #define CFG_SATA_IDE_SSID DFLT_SATA_IDE_SSID
+ #endif
+
+ #ifdef BLDCFG_SATA_RAID5_SSID
+ #define CFG_SATA_RAID5_SSID BLDCFG_SATA_RAID5_SSID
+ #else
+ #define CFG_SATA_RAID5_SSID DFLT_SATA_RAID5_SSID
+ #endif
+
+ #ifdef BLDCFG_SATA_RAID_SSID
+ #define CFG_SATA_RAID_SSID BLDCFG_SATA_RAID_SSID
+ #else
+ #define CFG_SATA_RAID_SSID DFLT_SATA_RAID_SSID
+ #endif
+
+ #ifdef BLDCFG_EHCI_SSID
+ #define CFG_EHCI_SSID BLDCFG_EHCI_SSID
+ #else
+ #define CFG_EHCI_SSID DFLT_EHCI_SSID
+ #endif
+
+ #ifdef BLDCFG_OHCI_SSID
+ #define CFG_OHCI_SSID BLDCFG_OHCI_SSID
+ #else
+ #define CFG_OHCI_SSID DFLT_OHCI_SSID
+ #endif
+
+ #ifdef BLDCFG_LPC_SSID
+ #define CFG_LPC_SSID BLDCFG_LPC_SSID
+ #else
+ #define CFG_LPC_SSID DFLT_LPC_SSID
+ #endif
+
+ #ifdef BLDCFG_SD_SSID
+ #define CFG_SD_SSID BLDCFG_SD_SSID
+ #else
+ #define CFG_SD_SSID DFLT_SD_SSID
+ #endif
+
+ #ifdef BLDCFG_XHCI_SSID
+ #define CFG_XHCI_SSID BLDCFG_XHCI_SSID
+ #else
+ #define CFG_XHCI_SSID DFLT_XHCI_SSID
+ #endif
+
+ #ifdef BLDCFG_FCH_PORT80_BEHIND_PCIB
+ #define CFG_FCH_PORT80_BEHIND_PCIB BLDCFG_FCH_PORT80_BEHIND_PCIB
+ #else
+ #define CFG_FCH_PORT80_BEHIND_PCIB DFLT_FCH_PORT80_BEHIND_PCIB
+ #endif
+
+ #ifdef BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP
+ #define CFG_FCH_ENABLE_ACPI_SLEEP_TRAP BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP
+ #else
+ #define CFG_FCH_ENABLE_ACPI_SLEEP_TRAP DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP
+ #endif
+
+ #ifdef BLDCFG_FCH_GPP_LINK_CONFIG
+ #define CFG_FCH_GPP_LINK_CONFIG BLDCFG_FCH_GPP_LINK_CONFIG
+ #else
+ #define CFG_FCH_GPP_LINK_CONFIG DFLT_FCH_GPP_LINK_CONFIG
+ #endif
+
+ #ifdef BLDCFG_FCH_GPP_PORT0_PRESENT
+ #define CFG_FCH_GPP_PORT0_PRESENT BLDCFG_FCH_GPP_PORT0_PRESENT
+ #else
+ #define CFG_FCH_GPP_PORT0_PRESENT DFLT_FCH_GPP_PORT0_PRESENT
+ #endif
+
+ #ifdef BLDCFG_FCH_GPP_PORT1_PRESENT
+ #define CFG_FCH_GPP_PORT1_PRESENT BLDCFG_FCH_GPP_PORT1_PRESENT
+ #else
+ #define CFG_FCH_GPP_PORT1_PRESENT DFLT_FCH_GPP_PORT1_PRESENT
+ #endif
+
+ #ifdef BLDCFG_FCH_GPP_PORT2_PRESENT
+ #define CFG_FCH_GPP_PORT2_PRESENT BLDCFG_FCH_GPP_PORT2_PRESENT
+ #else
+ #define CFG_FCH_GPP_PORT2_PRESENT DFLT_FCH_GPP_PORT2_PRESENT
+ #endif
+
+ #ifdef BLDCFG_FCH_GPP_PORT3_PRESENT
+ #define CFG_FCH_GPP_PORT3_PRESENT BLDCFG_FCH_GPP_PORT3_PRESENT
+ #else
+ #define CFG_FCH_GPP_PORT3_PRESENT DFLT_FCH_GPP_PORT3_PRESENT
+ #endif
+
+ #ifdef BLDCFG_FCH_GPP_PORT0_HOTPLUG
+ #define CFG_FCH_GPP_PORT0_HOTPLUG BLDCFG_FCH_GPP_PORT0_HOTPLUG
+ #else
+ #define CFG_FCH_GPP_PORT0_HOTPLUG DFLT_FCH_GPP_PORT0_HOTPLUG
+ #endif
+
+ #ifdef BLDCFG_FCH_GPP_PORT1_HOTPLUG
+ #define CFG_FCH_GPP_PORT1_HOTPLUG BLDCFG_FCH_GPP_PORT1_HOTPLUG
+ #else
+ #define CFG_FCH_GPP_PORT1_HOTPLUG DFLT_FCH_GPP_PORT1_HOTPLUG
+ #endif
+
+ #ifdef BLDCFG_FCH_GPP_PORT2_HOTPLUG
+ #define CFG_FCH_GPP_PORT2_HOTPLUG BLDCFG_FCH_GPP_PORT2_HOTPLUG
+ #else
+ #define CFG_FCH_GPP_PORT2_HOTPLUG DFLT_FCH_GPP_PORT2_HOTPLUG
+ #endif
+
+ #ifdef BLDCFG_FCH_GPP_PORT3_HOTPLUG
+ #define CFG_FCH_GPP_PORT3_HOTPLUG BLDCFG_FCH_GPP_PORT3_HOTPLUG
+ #else
+ #define CFG_FCH_GPP_PORT3_HOTPLUG DFLT_FCH_GPP_PORT3_HOTPLUG
+ #endif
+
+ #ifdef BLDCFG_FCH_ESATA_PORT_BITMAP
+ #define CFG_FCH_ESATA_PORT_BITMAP BLDCFG_FCH_ESATA_PORT_BITMAP
+ #else
+ #define CFG_FCH_ESATA_PORT_BITMAP 0
+ #endif
+
+ #ifdef BLDCFG_FCH_IR_PIN_CONTROL
+ #define CFG_FCH_IR_PIN_CONTROL BLDCFG_FCH_IR_PIN_CONTROL
+ #else
+ #define CFG_FCH_IR_PIN_CONTROL (BIT5 | BIT1 | BIT0)
+ #endif
+
+ #ifdef BLDCFG_FCH_SD_CLOCK_CONTROL
+ #define CFG_FCH_SD_CLOCK_CONTROL BLDCFG_FCH_SD_CLOCK_CONTROL
+ #else
+ #define CFG_FCH_SD_CLOCK_CONTROL Sd50MhzTraceCableLengthWithinSixInches
+ #endif
+
+ #ifdef BLDCFG_FCH_SCI_MAP_LIST
+ #define CFG_FCH_SCI_MAP_LIST BLDCFG_FCH_SCI_MAP_LIST
+ #else
+ #define CFG_FCH_SCI_MAP_LIST NULL
+ #endif
+
+ #ifdef BLDCFG_FCH_SATA_PHY_LIST
+ #define CFG_FCH_SATA_PHY_LIST BLDCFG_FCH_SATA_PHY_LIST
+ #else
+ #define CFG_FCH_SATA_PHY_LIST NULL
+ #endif
+
+ #ifdef BLDCFG_FCH_GPIO_CONTROL_LIST
+ #define CFG_FCH_GPIO_CONTROL_LIST BLDCFG_FCH_GPIO_CONTROL_LIST
+ #else
+ #define CFG_FCH_GPIO_CONTROL_LIST NULL
+ #endif
+
+
+ #ifdef AGESA_ENTRY_INIT_RESET
+ #if AGESA_ENTRY_INIT_RESET == TRUE
+ //
+ // Define task list for InitReset phase
+ //
+ FCH_TASK_ENTRY ROMDATA *FchInitResetTaskTable[] = {
+ InstallFchInitResetHwAcpiP,
+ InstallFchInitResetAb,
+ InstallFchInitResetSpi,
+ InstallFchInitResetGec,
+ InstallFchInitResetHwAcpi,
+ InstallFchInitResetSata,
+ InstallFchInitResetLpc,
+ InstallFchInitResetPcib,
+ InstallFchInitResetPcie,
+ InstallFchInitResetGpp,
+ InstallFchInitAllinoneGPP,
+ InstallFchInitResetUsb,
+ InstallFchInitResetUsbEhci,
+ InstallFchInitResetUsbOhci,
+ InstallFchInitResetUsbXhci,
+ InstallFchInitResetImc,
+ NULL
+ };
+ #endif
+ #endif
+
+ #ifdef AGESA_ENTRY_INIT_ENV
+ #if AGESA_ENTRY_INIT_ENV == TRUE
+ //
+ // Define task list for InitEnv phase
+ //
+ FCH_TASK_ENTRY ROMDATA *FchInitEnvTaskTable[] = {
+ InstallFchInitEnvHwAcpiP,
+ InstallFchInitEnvPcib,
+ InstallFchInitEnvPcie,
+ InstallFchInitEnvGpp,
+ InstallFchInitEnvIr,
+ InstallFchInitEnvHwAcpi,
+ InstallFchInitEnvSpi,
+ InstallFchInitEnvSd,
+ InstallFchInitEnvImc,
+ InstallFchInitEnvUsb,
+ InstallFchInitEnvUsbEhci,
+ InstallFchInitEnvUsbOhci,
+ InstallFchInitEnvUsbXhci,
+ InstallFchInitEnvSata,
+ InstallFchInitEnvIde,
+ InstallFchInitEnvGec,
+ InstallFchInitEnvAzalia,
+ InstallFchInitEnvAb,
+ InstallFchInitEnvHwm,
+ InstallFchInitEnvGppPhaseII,
+ InstallFchInitEnvAbS,
+ NULL
+ };
+ #endif
+ #endif
+
+
+ #ifdef AGESA_ENTRY_INIT_MID
+ #if AGESA_ENTRY_INIT_MID == TRUE
+ //
+ // Define task list for InitMid phase
+ //
+ FCH_TASK_ENTRY ROMDATA *FchInitMidTaskTable[] = {
+ InstallFchInitMidImc,
+ InstallFchInitMidUsb,
+ InstallFchInitMidUsbEhci,
+ InstallFchInitMidUsbOhci,
+ InstallFchInitMidUsbXhci,
+ InstallFchInitMidSata,
+ InstallFchInitMidIde,
+ InstallFchInitMidGec,
+ InstallFchInitMidAzalia,
+ InstallFchInitMidHwm,
+ NULL
+ };
+ #endif
+ #endif
+
+ #ifdef AGESA_ENTRY_INIT_LATE
+ #if AGESA_ENTRY_INIT_LATE == TRUE
+ //
+ // Define task list for InitLate phase
+ //
+ FCH_TASK_ENTRY ROMDATA *FchInitLateTaskTable[] = {
+ InstallFchInitLatePcie,
+ InstallFchInitLatePcib,
+ InstallFchInitLateSpi,
+ InstallFchInitLateUsb,
+ InstallFchInitLateUsbEhci,
+ InstallFchInitLateUsbOhci,
+ InstallFchInitLateUsbXhci,
+ InstallFchInitLateSata,
+ InstallFchInitLateIde,
+ InstallFchInitLateGec,
+ InstallFchInitLateAzalia,
+ InstallFchInitLateImc,
+ InstallFchInitLateHwm,
+ InstallFchInitLateGpp,
+ InstallFchInitLateHwAcpi,
+ NULL
+ };
+ #endif
+ #endif
+
+
+ #ifdef AGESA_ENTRY_INIT_ENV
+ #if AGESA_ENTRY_INIT_ENV == TRUE
+ //
+ // Define task list for S3 resume before PCI phase
+ //
+ FCH_TASK_ENTRY ROMDATA *FchInitS3EarlyTaskTable[] = {
+ InstallFchInitEnvPcie,
+ InstallFchInitEnvPcib,
+ InstallFchInitEnvGpp,
+ InstallFchInitEnvIr,
+ InstallFchInitEnvHwAcpi,
+ InstallFchInitEnvSpi,
+ InstallFchInitEnvSd,
+ InstallFchInitEnvUsb,
+ InstallFchInitEnvUsbXhci,
+ InstallFchInitEnvSata,
+ InstallFchInitEnvIde,
+ InstallFchInitEnvGec,
+ InstallFchInitEnvAzalia,
+ InstallFchInitEnvAb,
+ InstallFchInitEnvGppPhaseII,
+ InstallFchInitEnvAbS,
+ NULL
+ };
+ #endif
+ #endif
+
+ #ifdef AGESA_ENTRY_INIT_LATE
+ #if AGESA_ENTRY_INIT_LATE == TRUE
+ //
+ // Define task list for S3 resume after PCI phase
+ //
+ FCH_TASK_ENTRY ROMDATA *FchInitS3LateTaskTable[] = {
+ InstallFchInitLatePcie,
+ InstallFchInitLatePcib,
+ InstallFchInitLateSpi,
+ InstallFchInitLateUsb,
+ InstallFchInitLateUsbEhci,
+ InstallFchInitLateUsbOhci,
+ InstallFchInitLateUsbXhci,
+ InstallFchInitMidSata,
+ InstallFchInitMidIde,
+ InstallFchInitMidGec,
+ InstallFchInitMidAzalia,
+ InstallFchInitLateSata,
+ InstallFchInitLateIde,
+ InstallFchInitLateHwAcpi,
+ InstallFchInitLateGpp,
+ InstallFchInitEnvHwm,
+ InstallFchInitLateGpp,
+ InstallFchInitLateHwm,
+ NULL
+ };
+ #endif
+ #endif
+ FCH_TASK_ENTRY *FchGppHotplugSmiCallbackPtr = InstallHpSmiCallback;
+
+
+#else // FCH_SUPPORT == FALSE
+ /* FCH Interface entries */
+ extern FCH_INIT CommonFchInitStub;
+
+ #define FP_FCH_INIT_RESET &CommonFchInitStub
+ #define FP_FCH_INIT_RESET_CONSTRUCT &CommonFchInitStub
+ #define FP_FCH_INIT_ENV &CommonFchInitStub
+ #define FP_FCH_INIT_ENV_CONSTRUCT &CommonFchInitStub
+ #define FP_FCH_INIT_MID &CommonFchInitStub
+ #define FP_FCH_INIT_MID_CONSTRUCT &CommonFchInitStub
+ #define FP_FCH_INIT_LATE &CommonFchInitStub
+ #define FP_FCH_INIT_LATE_CONSTRUCT &CommonFchInitStub
+
+ #define CFG_SMBUS0_BASE_ADDRESS 0
+ #define CFG_SMBUS1_BASE_ADDRESS 0
+ #define CFG_SIO_PME_BASE_ADDRESS 0
+ #define CFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0
+ #define CFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0
+ #define CFG_ACPI_PM_TMR_BLOCK_ADDRESS 0
+ #define CFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0
+ #define CFG_ACPI_GPE0_BLOCK_ADDRESS 0
+ #define CFG_SPI_ROM_BASE_ADDRESS 0
+ #define CFG_WATCHDOG_TIMER_BASE 0
+ #define CFG_HPET_BASE_ADDRESS 0
+ #define CFG_SMI_CMD_PORT_ADDRESS 0
+ #define CFG_ACPI_PMA_CNTBLK_ADDRESS 0
+ #define CFG_GEC_SHADOW_ROM_BASE 0
+ #define CFG_AZALIA_SSID 0
+ #define CFG_SMBUS_SSID 0
+ #define CFG_IDE_SSID 0
+ #define CFG_SATA_AHCI_SSID 0
+ #define CFG_SATA_IDE_SSID 0
+ #define CFG_SATA_RAID5_SSID 0
+ #define CFG_SATA_RAID_SSID 0
+ #define CFG_EHCI_SSID 0
+ #define CFG_OHCI_SSID 0
+ #define CFG_LPC_SSID 0
+ #define CFG_SD_SSID 0
+ #define CFG_XHCI_SSID 0
+ #define CFG_FCH_PORT80_BEHIND_PCIB 0
+ #define CFG_FCH_ENABLE_ACPI_SLEEP_TRAP 0
+ #define CFG_FCH_GPP_LINK_CONFIG 0
+ #define CFG_FCH_GPP_PORT0_PRESENT 0
+ #define CFG_FCH_GPP_PORT1_PRESENT 0
+ #define CFG_FCH_GPP_PORT2_PRESENT 0
+ #define CFG_FCH_GPP_PORT3_PRESENT 0
+ #define CFG_FCH_GPP_PORT0_HOTPLUG 0
+ #define CFG_FCH_GPP_PORT1_HOTPLUG 0
+ #define CFG_FCH_GPP_PORT2_HOTPLUG 0
+ #define CFG_FCH_GPP_PORT3_HOTPLUG 0
+
+ #define CFG_FCH_ESATA_PORT_BITMAP 0
+ #define CFG_FCH_IR_PIN_CONTROL 0
+ #define CFG_FCH_SD_CLOCK_CONTROL 0
+ #define CFG_FCH_SCI_MAP_LIST 0
+ #define CFG_FCH_SATA_PHY_LIST 0
+ #define CFG_FCH_GPIO_CONTROL_LIST 0
+
+#endif
+
+
+CONST BLDOPT_FCH_FUNCTION ROMDATA BldoptFchFunction = {
+ FP_FCH_INIT_RESET,
+ FP_FCH_INIT_RESET_CONSTRUCT,
+ FP_FCH_INIT_ENV,
+ FP_FCH_INIT_ENV_CONSTRUCT,
+ FP_FCH_INIT_MID,
+ FP_FCH_INIT_MID_CONSTRUCT,
+ FP_FCH_INIT_LATE,
+ FP_FCH_INIT_LATE_CONSTRUCT,
+};
+
+#endif // _OPTION_FCH_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionGfxRecovery.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionGfxRecovery.h
new file mode 100644
index 0000000..1d96113
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionGfxRecovery.h
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD GFX Recovery option API.
+ *
+ * Contains structures and values used to control the GfxRecovery option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_GFX_RECOVERY_H_
+#define _OPTION_GFX_RECOVERY_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef AGESA_STATUS OPTION_GFX_RECOVERY_FEATURE (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#define GFX_RECOVERY_STRUCT_VERSION 0x01
+
+/// The Option Configuration of GFX Recovery
+typedef struct {
+ UINT16 OptGfxRecoveryVersion; ///< The version number of GFX Recovery
+ OPTION_GFX_RECOVERY_FEATURE *GfxRecoveryFeature; ///< The Option Feature of GFX Recovery
+} OPTION_GFX_RECOVERY_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif // _OPTION_GFX_RECOVERY_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionGfxRecoveryInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionGfxRecoveryInstall.h
new file mode 100644
index 0000000..75ae37e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionGfxRecoveryInstall.h
@@ -0,0 +1,53 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: GfxRecovery
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_GFX_RECOVERY_INSTALL_H_
+#define _OPTION_GFX_RECOVERY_INSTALL_H_
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+
+
+#endif // _OPTION_GFX_RECOVERY_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionGnb.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionGnb.h
new file mode 100644
index 0000000..a1b9166
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionGnb.h
@@ -0,0 +1,134 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD ALIB option API.
+ *
+ * Contains structures and values used to control the ALIB option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 86709 $ @e \$Date: 2013-01-24 17:39:09 -0600 (Thu, 24 Jan 2013) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_GNB_H_
+#define _OPTION_GNB_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+typedef AGESA_STATUS OPTION_GNB_FEATURE (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef AGESA_STATUS F_ALIB_UPDATE (
+ IN OUT VOID *AlibSsdtBuffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef VOID* F_ALIB_GET (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// The Option Configuration
+typedef struct {
+ UINT64 Type; ///< Type
+ OPTION_GNB_FEATURE *GnbFeature; ///< The GNB Feature
+ UINT8 TestPoint; ///< The post code for each entry
+} OPTION_GNB_CONFIGURATION;
+
+/// The Build time options configuration
+typedef struct {
+ BOOLEAN IgfxModeAsPcieEp; ///< Itegrated Gfx mode Pcie EP or Legacy
+ BOOLEAN LclkDeepSleepEn; ///< Default for LCLK deep sleep
+ BOOLEAN LclkDpmEn; ///< Default for LCLK DPM
+ UINT8 GmcPowerGating; ///< Control GMC power gating
+ BOOLEAN SmuSclkClockGatingEnable; ///< Control SMU SCLK gating
+ BOOLEAN PcieAspmBlackListEnable; ///< Control Pcie Aspm Black List
+ BOOLEAN IvrsRelativeAddrNamesSupport; ///< Support for relative address names
+ BOOLEAN GnbLoadRealF1Table;
+ UINT32 CfgGnbLinkReceiverDetectionPooling; ///< Receiver pooling detection time in us.
+ UINT32 CfgGnbLinkL0Pooling; ///< Pooling for link to get to L0 in us
+ UINT32 CfgGnbLinkGpioResetAssertionTime; ///< Gpio reset assertion time in us
+ UINT32 CfgGnbLinkResetToTrainingTime; ///< Time duration between deassert GPIO reset and release training in us
+ UINT8 CfgGnbTrainingAlgorithm; ///< distribution of training across interface calls
+ BOOLEAN CfgForceCableSafeOff; ///< Force cable safe off
+ BOOLEAN CfgOrbClockGatingEnable; ///< Control ORB clock gating
+ UINT8 CfgPciePowerGatingFlags; ///< Pcie Power gating flags
+ BOOLEAN CfgStub;
+ BOOLEAN CfgIocSclkClockGatingEnable; ///< Control IOC SCLK clock gating
+ BOOLEAN CfgIommuL1ClockGatingEnable; ///< Control IOMMU L1 clock gating
+ BOOLEAN CfgIommuL2ClockGatingEnable; ///< Control IOMMU L2 clock gating
+ BOOLEAN CfgAltVddNb; ///< AltVDDNB support
+ BOOLEAN CfgBapmSupport; ///< BAPM support
+ BOOLEAN CfgUnusedSimdPowerGatingEnable; ///< Control unused SIMD power gate
+ BOOLEAN CfgUnusedRbPowerGatingEnable; ///< Control unused SIMD power gate
+ BOOLEAN CfgNbdpmEnable; ///< NBDPM refers to dynamically reprogramming High and Low NB Pstates under different system usage scenarios
+ BOOLEAN CfgGmcClockGating; ///< Control GMC clock power gate
+ BOOLEAN CfgMaxPayloadEnable; ///< Enables configuration of Max_Payload_Size in PCIe device links
+ BOOLEAN CfgOrbDynWakeEnable; ///< Enables ORB Dynamic wake up
+ BOOLEAN CfgLoadlineEnable; ///< Enable Loadline Optimization
+ BOOLEAN CfgPciePhyIsolationEnable; ///< Enable Pcie Phy Isolation
+ BOOLEAN CfgLhtcSupport; ///< LHTC support
+ UINT8 CfgSviRevision; ///< SVI revision
+ BOOLEAN CfgScsSupport; ///< Scs support
+ BOOLEAN CfgSamuPatchEnabled;
+ UINT8 OemIdString[6]; ///< Configurable ACPI OEM Id
+ UINT8 OemTableIdString[8]; ///< Configurable ACPI OEM Table Id
+ BOOLEAN CfgTdcSupport; ///< TDC tracking support
+ BOOLEAN CfgPkgPowerTrackingSupport; ///< Package Power tracking
+ BOOLEAN CfgNativeGen1PLL; ///< Control Native Gen1 PLL
+ UINT8 CfgUmaSteering; ///< Configurable UMA Steering
+} GNB_BUILD_OPTIONS;
+
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _OPTION_GNB_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionGnbInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionGnbInstall.h
new file mode 100644
index 0000000..a648cc4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionGnbInstall.h
@@ -0,0 +1,932 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: GNB
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 87849 $ @e \$Date: 2013-02-11 15:37:58 -0600 (Mon, 11 Feb 2013) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_GNB_INSTALL_H_
+#define _OPTION_GNB_INSTALL_H_
+
+#include "S3SaveState.h"
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+
+//---------------------------------------------------------------------------------------------------
+// Family installation
+//---------------------------------------------------------------------------------------------------
+
+
+
+#define GNB_TYPE_TN FALSE
+#define GNB_TYPE_BK FALSE
+#define GNB_TYPE_KV FALSE
+#define GNB_TYPE_KB FALSE
+#define GNB_TYPE_BK FALSE
+#define GNB_TYPE_ML FALSE
+
+#if (OPTION_FAMILY15H_TN == TRUE)
+ #undef GNB_TYPE_TN
+ #define GNB_TYPE_TN TRUE
+#endif
+
+
+#if (OPTION_FAMILY16H_KB == TRUE)
+ #undef GNB_TYPE_KB
+ #define GNB_TYPE_KB TRUE
+#endif
+
+
+#if (GNB_TYPE_KB == TRUE || GNB_TYPE_TN == TRUE)
+//---------------------------------------------------------------------------------------------------
+// Service installation
+//---------------------------------------------------------------------------------------------------
+
+ #include "Gnb.h"
+ #include "GnbPcie.h"
+ #include "GnbGfx.h"
+
+ #define SERVICES_POINTER NULL
+ #if (GNB_TYPE_TN == TRUE)
+ #include "GnbInitTNInstall.h"
+ #endif
+ #if (GNB_TYPE_KB == TRUE)
+ #include "GnbInitKBInstall.h"
+ #endif
+ GNB_SERVICE *ServiceTable = SERVICES_POINTER;
+
+//---------------------------------------------------------------------------------------------------
+// BUILD options
+//---------------------------------------------------------------------------------------------------
+
+ #ifndef CFG_IGFX_AS_PCIE_EP
+ #define CFG_IGFX_AS_PCIE_EP TRUE
+ #endif
+
+ #ifndef CFG_LCLK_DEEP_SLEEP_EN
+ #if (GNB_TYPE_TN == TRUE)
+ #define CFG_LCLK_DEEP_SLEEP_EN FALSE
+ #else
+ #define CFG_LCLK_DEEP_SLEEP_EN TRUE
+ #endif
+ #endif
+
+ #ifndef CFG_LCLK_DPM_EN
+ #define CFG_LCLK_DPM_EN TRUE
+ #endif
+
+ #ifndef CFG_GMC_POWER_GATING
+ #if ((GNB_TYPE_TN == TRUE) || (GNB_TYPE_KB == TRUE))
+ #define CFG_GMC_POWER_GATING GmcPowerGatingWithStutter
+ #else
+ #define CFG_GMC_POWER_GATING GmcPowerGatingDisabled
+ #endif
+ #endif
+
+ #ifndef CFG_SMU_SCLK_CLOCK_GATING_ENABLE
+ #if (GNB_TYPE_TN == TRUE)
+ #define CFG_SMU_SCLK_CLOCK_GATING_ENABLE TRUE
+ #else
+ #define CFG_SMU_SCLK_CLOCK_GATING_ENABLE FALSE
+ #endif
+ #endif
+
+ #ifndef CFG_PCIE_ASPM_BLACK_LIST_ENABLE
+ #define CFG_PCIE_ASPM_BLACK_LIST_ENABLE TRUE
+ #endif
+
+ #ifndef CFG_GNB_IVRS_RELATIVE_ADDR_NAMES_SUPPORT
+ #define CFG_GNB_IVRS_RELATIVE_ADDR_NAMES_SUPPORT FALSE
+ #endif
+
+ #ifndef CFG_GNB_LOAD_REAL_FUSE
+ #define CFG_GNB_LOAD_REAL_FUSE TRUE
+ #endif
+
+ #ifndef CFG_GNB_PCIE_LINK_RECEIVER_DETECTION_POOLING
+ #define CFG_GNB_PCIE_LINK_RECEIVER_DETECTION_POOLING (60 * 1000)
+ #endif
+
+ #ifndef CFG_GNB_PCIE_LINK_L0_POOLING
+ #define CFG_GNB_PCIE_LINK_L0_POOLING (60 * 1000)
+ #endif
+
+ #ifndef CFG_GNB_PCIE_LINK_GPIO_RESET_ASSERT_TIME
+ #define CFG_GNB_PCIE_LINK_GPIO_RESET_ASSERT_TIME (2 * 1000)
+ #endif
+
+ #ifndef CFG_GNB_PCIE_LINK_RESET_TO_TRAINING_TIME
+ #define CFG_GNB_PCIE_LINK_RESET_TO_TRAINING_TIME (2 * 1000)
+ #endif
+
+ #ifdef BLDCFG_PCIE_TRAINING_ALGORITHM
+ #define CFG_GNB_PCIE_TRAINING_ALGORITHM BLDCFG_PCIE_TRAINING_ALGORITHM
+ #else
+ #define CFG_GNB_PCIE_TRAINING_ALGORITHM PcieTrainingStandard
+ #endif
+
+ #ifndef CFG_GNB_FORCE_CABLESAFE_OFF
+ #define CFG_GNB_FORCE_CABLESAFE_OFF FALSE
+ #endif
+
+ #ifndef CFG_ORB_CLOCK_GATING_ENABLE
+ #define CFG_ORB_CLOCK_GATING_ENABLE TRUE
+ #endif
+
+ #ifndef CFG_GNB_PCIE_POWERGATING_FLAGS
+ #define CFG_GNB_PCIE_POWERGATING_FLAGS 0x0
+ #endif
+
+
+ #ifndef CFG_IOC_SCLK_CLOCK_GATING_ENABLE
+ #if (GNB_TYPE_TN == TRUE)
+ #define CFG_IOC_SCLK_CLOCK_GATING_ENABLE TRUE
+ #else
+ #define CFG_IOC_SCLK_CLOCK_GATING_ENABLE FALSE
+ #endif
+ #endif
+
+ #ifndef CFG_IOMMU_L1_CLOCK_GATING_ENABLE
+ #if (GNB_TYPE_TN == TRUE)
+ #define CFG_IOMMU_L1_CLOCK_GATING_ENABLE TRUE
+ #else
+ #define CFG_IOMMU_L1_CLOCK_GATING_ENABLE FALSE
+ #endif
+ #endif
+
+ #ifndef CFG_IOMMU_L2_CLOCK_GATING_ENABLE
+ #if (GNB_TYPE_TN == TRUE)
+ #define CFG_IOMMU_L2_CLOCK_GATING_ENABLE TRUE
+ #else
+ #define CFG_IOMMU_L2_CLOCK_GATING_ENABLE FALSE
+ #endif
+ #endif
+
+ #ifndef CFG_GNB_ALTVDDNB_SUPPORT
+ #define CFG_GNB_ALTVDDNB_SUPPORT TRUE
+ #endif
+
+ #ifndef CFG_GNB_BAPM_SUPPORT
+ #if ((GNB_TYPE_TN == TRUE) || (GNB_TYPE_KB == TRUE))
+ #define CFG_GNB_BAPM_SUPPORT TRUE
+ #else
+ #define CFG_GNB_BAPM_SUPPORT FALSE
+ #endif
+ #endif
+
+ #ifndef CFG_GNB_LHTC_SUPPORT
+ #if (GNB_TYPE_KB == TRUE)
+ #define CFG_GNB_LHTC_SUPPORT TRUE
+ #else
+ #define CFG_GNB_LHTC_SUPPORT FALSE
+ #endif
+ #endif
+
+ #ifndef CFG_UNUSED_SIMD_POWERGATING_ENABLE
+ #define CFG_UNUSED_SIMD_POWERGATING_ENABLE TRUE
+ #endif
+
+ #ifndef CFG_UNUSED_RB_POWERGATING_ENABLE
+ #define CFG_UNUSED_RB_POWERGATING_ENABLE FALSE
+ #endif
+
+ #ifndef CFG_NBDPM_ENABLE
+ #if ((GNB_TYPE_KB == TRUE))
+ #define CFG_NBDPM_ENABLE FALSE
+ #else
+ #define CFG_NBDPM_ENABLE TRUE
+ #endif
+ #endif
+
+ #ifndef CFG_MAX_PAYLOAD_ENABLE
+ #define CFG_MAX_PAYLOAD_ENABLE TRUE
+ #endif
+
+
+ #ifndef CFG_ORB_DYN_WAKE_ENABLE
+ #if (GNB_TYPE_TN == TRUE || GNB_TYPE_KB == TRUE)
+ #define CFG_ORB_DYN_WAKE_ENABLE TRUE
+ #else
+ #define CFG_ORB_DYN_WAKE_ENABLE TRUE
+ #endif
+ #endif
+
+ #ifndef CFG_LOADLINE_ENABLE
+ #define CFG_LOADLINE_ENABLE TRUE
+ #endif
+
+ #ifndef CFG_PCIE_PHY_ISOLATION_SUPPORT
+ #if (GNB_TYPE_KB == TRUE)
+ #define CFG_PCIE_PHY_ISOLATION_SUPPORT TRUE
+ #else
+ #define CFG_PCIE_PHY_ISOLATION_SUPPORT FALSE
+ #endif
+ #endif
+
+ #ifndef CFG_SVI_REVISION
+ #if (GNB_TYPE_KB == TRUE || GNB_TYPE_TN == TRUE)
+ #define CFG_SVI_REVISION 2
+ #else
+ #define CFG_SVI_REVISION 1
+ #endif
+ #endif
+
+ #ifndef CFG_SCS_SUPPORT
+ #if ((GNB_TYPE_KB == TRUE))
+ #define CFG_SCS_SUPPORT TRUE
+ #else
+ #define CFG_SCS_SUPPORT FALSE
+ #endif
+ #endif
+
+ #ifndef CFG_SAMU_PATCH_ENABLED
+ #define CFG_SAMU_PATCH_ENABLED TRUE
+ #endif
+
+ #ifndef CFG_GNB_TDC_SUPPORT
+ #define CFG_GNB_TDC_SUPPORT TRUE
+ #endif
+ #ifndef CFG_NATIVE_GEN1_PLL_ENABLE
+ #define CFG_NATIVE_GEN1_PLL_ENABLE TRUE
+ #endif
+
+ #ifndef CFG_UMA_STEERING
+ #define CFG_UMA_STEERING 0
+ #endif
+
+ GNB_BUILD_OPTIONS ROMDATA GnbBuildOptions = {
+ CFG_IGFX_AS_PCIE_EP,
+ CFG_LCLK_DEEP_SLEEP_EN,
+ CFG_LCLK_DPM_EN,
+ CFG_GMC_POWER_GATING,
+ CFG_SMU_SCLK_CLOCK_GATING_ENABLE,
+ CFG_PCIE_ASPM_BLACK_LIST_ENABLE,
+ CFG_GNB_IVRS_RELATIVE_ADDR_NAMES_SUPPORT,
+ CFG_GNB_LOAD_REAL_FUSE,
+ CFG_GNB_PCIE_LINK_RECEIVER_DETECTION_POOLING,
+ CFG_GNB_PCIE_LINK_L0_POOLING,
+ CFG_GNB_PCIE_LINK_GPIO_RESET_ASSERT_TIME,
+ CFG_GNB_PCIE_LINK_RESET_TO_TRAINING_TIME,
+ CFG_GNB_PCIE_TRAINING_ALGORITHM,
+ CFG_GNB_FORCE_CABLESAFE_OFF,
+ CFG_ORB_CLOCK_GATING_ENABLE,
+ CFG_GNB_PCIE_POWERGATING_FLAGS,
+ TRUE,
+ CFG_IOC_SCLK_CLOCK_GATING_ENABLE,
+ CFG_IOMMU_L1_CLOCK_GATING_ENABLE,
+ CFG_IOMMU_L2_CLOCK_GATING_ENABLE,
+ CFG_GNB_ALTVDDNB_SUPPORT,
+ CFG_GNB_BAPM_SUPPORT,
+ CFG_UNUSED_SIMD_POWERGATING_ENABLE,
+ CFG_UNUSED_RB_POWERGATING_ENABLE,
+ CFG_NBDPM_ENABLE,
+ TRUE,
+ CFG_MAX_PAYLOAD_ENABLE,
+ CFG_ORB_DYN_WAKE_ENABLE,
+ CFG_LOADLINE_ENABLE,
+ CFG_PCIE_PHY_ISOLATION_SUPPORT,
+ CFG_GNB_LHTC_SUPPORT,
+ CFG_SVI_REVISION,
+ CFG_SCS_SUPPORT,
+ CFG_SAMU_PATCH_ENABLED,
+ {CFG_ACPI_SET_OEM_ID},
+ {CFG_ACPI_SET_OEM_TABLE_ID},
+ CFG_GNB_TDC_SUPPORT,
+ TRUE,
+ CFG_NATIVE_GEN1_PLL_ENABLE,
+ CFG_UMA_STEERING
+ };
+
+ //---------------------------------------------------------------------------------------------------
+ // SMU Firmware
+ //---------------------------------------------------------------------------------------------------
+
+
+
+ //---------------------------------------------------------------------------------------------------
+ // Module entries
+ //---------------------------------------------------------------------------------------------------
+
+ #if (AGESA_ENTRY_INIT_EARLY == TRUE)
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_NB_EARLY_INIT
+ #define OPTION_NB_EARLY_INIT TRUE
+ #endif
+ #if (OPTION_NB_EARLY_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE GnbEarlyInterfaceTN;
+ #define OPTION_GNBEARLYINTERFACETN_ENTRY {AMD_FAMILY_TN, GnbEarlyInterfaceTN, TpGnbEarlyInterface},
+ #else
+ #define OPTION_GNBEARLYINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_NB_EARLY_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GnbEarlyInterfaceKB;
+ #define OPTION_GNBEARLYINTERFACEKB_ENTRY {AMD_FAMILY_KB, GnbEarlyInterfaceKB, TpGnbEarlyInterface},
+ #else
+ #define OPTION_GNBEARLYINTERFACEKB_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_PCIE_CONFIG_MAP
+ #define OPTION_PCIE_CONFIG_MAP TRUE
+ #endif
+ #if (OPTION_PCIE_CONFIG_MAP == TRUE) && (GNB_TYPE_TN == TRUE || GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE PcieConfigurationMap;
+ #define OPTION_PCIECONFIGURATIONMAP_ENTRY {AMD_FAMILY_TN | AMD_FAMILY_KB, PcieConfigurationMap, TpGnbPcieConfigurationMap},
+ #else
+ #define OPTION_PCIECONFIGURATIONMAP_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_PCIE_EARLY_INIT
+ #define OPTION_PCIE_EARLY_INIT TRUE
+ #endif
+ #if (OPTION_PCIE_EARLY_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE PcieEarlyInterfaceTN;
+ #define OPTION_PCIEEARLYINTERFACETN_ENTRY {AMD_FAMILY_TN, PcieEarlyInterfaceTN, TpGnbPcieEarlyInterface},
+ #else
+ #define OPTION_PCIEEARLYINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_PCIE_EARLY_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE PcieEarlyInterfaceKB;
+ #define OPTION_PCIEEARLYINTERFACEKB_ENTRY {AMD_FAMILY_KB, PcieEarlyInterfaceKB, TpGnbPcieEarlyInterface},
+ #else
+ #define OPTION_PCIEEARLYINTERFACEKB_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ OPTION_GNB_CONFIGURATION GnbEarlyFeatureTable[] = {
+ OPTION_GNBEARLYINTERFACETN_ENTRY
+ OPTION_GNBEARLYINTERFACEKB_ENTRY
+ OPTION_PCIECONFIGURATIONMAP_ENTRY
+ OPTION_PCIEEARLYINTERFACETN_ENTRY
+ OPTION_PCIEEARLYINTERFACEKB_ENTRY
+ {0, NULL, EndGnbTestPoints}
+ };
+
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_PCIE_CONFIG_INIT
+ #define OPTION_PCIE_CONFIG_INIT TRUE
+ #endif
+ #if (OPTION_PCIE_CONFIG_INIT == TRUE) && (GNB_TYPE_TN == TRUE || GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE PcieConfigurationInit;
+ #define OPTION_PCIECONFIGURATIONINIT_ENTRY {AMD_FAMILY_TN | AMD_FAMILY_KB, PcieConfigurationInit, TpGnbEarlierPcieConfigurationInit},
+ #else
+ #define OPTION_PCIECONFIGURATIONINIT_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_NB_EARLIER_INIT
+ #define OPTION_NB_EARLIER_INIT TRUE
+ #endif
+ #if (OPTION_NB_EARLIER_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE GnbEarlierInterfaceTN;
+ #define OPTION_GNBEARLIERINTERFACETN_ENTRY {AMD_FAMILY_TN, GnbEarlierInterfaceTN, TpGnbEarlierInterface},
+ #else
+ #define OPTION_GNBEARLIERINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_NB_EARLIER_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GnbEarlierInterfaceKB;
+ #define OPTION_GNBEARLIERINTERFACEKB_ENTRY {AMD_FAMILY_KB, GnbEarlierInterfaceKB, TpGnbEarlierInterface},
+ #else
+ #define OPTION_GNBEARLIERINTERFACEKB_ENTRY
+ #endif
+
+ #if (OPTION_NB_EARLIER_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE OptionGnbInstall581;
+ #define OPTION_GNBSCSINTERFACEKB_ENTRY {AMD_FAMILY_KB, OptionGnbInstall581, TpGnbEarlierInterface},
+ #else
+ #define OPTION_GNBSCSINTERFACEKB_ENTRY
+ #endif
+
+
+ OPTION_GNB_CONFIGURATION GnbEarlierFeatureTable[] = {
+ OPTION_PCIECONFIGURATIONINIT_ENTRY
+ OPTION_GNBEARLIERINTERFACETN_ENTRY
+ OPTION_GNBEARLIERINTERFACEKB_ENTRY
+ OPTION_GNBSCSINTERFACEKB_ENTRY
+ {0, NULL, EndGnbTestPoints}
+ };
+ #endif
+
+ #if (AGESA_ENTRY_INIT_POST == TRUE)
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_GFX_CONFIG_POST_INIT
+ #define OPTION_GFX_CONFIG_POST_INIT TRUE
+ #endif
+ #if (OPTION_GFX_CONFIG_POST_INIT == TRUE) && (GNB_TYPE_TN == TRUE || GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GfxConfigPostInterface;
+ #define OPTION_GFXCONFIGPOSTINTERFACE_ENTRY {AMD_FAMILY_TN | AMD_FAMILY_KB, GfxConfigPostInterface, TpGnbGfxConfigPostInterface},
+ #else
+ #define OPTION_GFXCONFIGPOSTINTERFACE_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_GFX_POST_INIT
+ #define OPTION_GFX_POST_INIT TRUE
+ #endif
+ #if (OPTION_GFX_POST_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE GfxPostInterfaceTN;
+ #define OPTION_GFXPOSTINTERFACETN_ENTRY {AMD_FAMILY_TN, GfxPostInterfaceTN, TpGnbGfxPostInterface},
+ #else
+ #define OPTION_GFXPOSTINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_GFX_POST_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GfxPostInterfaceKB;
+ #define OPTION_GFXPOSTINTERFACEKB_ENTRY {AMD_FAMILY_KB, GfxPostInterfaceKB, TpGnbGfxPostInterface},
+ #else
+ #define OPTION_GFXPOSTINTERFACEKB_ENTRY
+ #endif
+
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_NB_POST_INIT
+ #define OPTION_NB_POST_INIT TRUE
+ #endif
+ #if (OPTION_NB_POST_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE GnbPostInterfaceTN;
+ #define OPTION_GNBPOSTINTERFACETN_ENTRY {AMD_FAMILY_TN, GnbPostInterfaceTN, TpGnbPostInterface},
+ #else
+ #define OPTION_GNBPOSTINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_NB_POST_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GnbPostInterfaceKB;
+ #define OPTION_GNBPOSTINTERFACEKB_ENTRY {AMD_FAMILY_KB, GnbPostInterfaceKB, TpGnbPostInterface},
+ #else
+ #define OPTION_GNBPOSTINTERFACEKB_ENTRY
+ #endif
+
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_PCIE_POST_EARLY_INIT
+ #define OPTION_PCIE_POST_EARLY_INIT TRUE
+ #endif
+ #if (OPTION_PCIE_POST_EARLY_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE PciePostEarlyInterfaceTN;
+ #define OPTION_PCIEPOSTEARLYINTERFACETN_ENTRY {AMD_FAMILY_TN, PciePostEarlyInterfaceTN, TpGnbPciePostEarlyInterface},
+ #else
+ #define OPTION_PCIEPOSTEARLYINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_PCIE_POST_EARLY_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE PciePostEarlyInterfaceKB;
+ #define OPTION_PCIEPOSTEARLYINTERFACEKB_ENTRY {AMD_FAMILY_KB, PciePostEarlyInterfaceKB, TpGnbPciePostEarlyInterface},
+ #else
+ #define OPTION_PCIEPOSTEARLYINTERFACEKB_ENTRY
+ #endif
+
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_PCIE_POST_INIT
+ #define OPTION_PCIE_POST_INIT TRUE
+ #endif
+ #if (OPTION_PCIE_POST_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE PciePostInterfaceTN;
+ #define OPTION_PCIEPOSTINTERFACETN_ENTRY {AMD_FAMILY_TN, PciePostInterfaceTN, TpGnbPciePostInterface},
+ #else
+ #define OPTION_PCIEPOSTINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_PCIE_POST_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE PciePostInterfaceKB;
+ #define OPTION_PCIEPOSTINTERFACEKB_ENTRY {AMD_FAMILY_KB, PciePostInterfaceKB, TpGnbPciePostInterface},
+ #else
+ #define OPTION_PCIEPOSTINTERFACEKB_ENTRY
+ #endif
+
+ //---------------------------------------------------------------------------------------------------
+ OPTION_GNB_CONFIGURATION GnbPostFeatureTable[] = {
+ OPTION_PCIEPOSTEARLYINTERFACETN_ENTRY
+ OPTION_PCIEPOSTEARLYINTERFACEKB_ENTRY
+ OPTION_GFXCONFIGPOSTINTERFACE_ENTRY
+ OPTION_GFXPOSTINTERFACETN_ENTRY
+ OPTION_GFXPOSTINTERFACEKB_ENTRY
+ {0, NULL, EndGnbTestPoints}
+ };
+
+ OPTION_GNB_CONFIGURATION GnbPostAfterDramFeatureTable[] = {
+ OPTION_GNBPOSTINTERFACETN_ENTRY
+ OPTION_GNBPOSTINTERFACEKB_ENTRY
+ OPTION_PCIEPOSTINTERFACETN_ENTRY
+ OPTION_PCIEPOSTINTERFACEKB_ENTRY
+ {0, NULL, EndGnbTestPoints}
+ };
+ #endif
+
+ #if (AGESA_ENTRY_INIT_ENV == TRUE)
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_NB_ENV_INIT
+ #define OPTION_NB_ENV_INIT TRUE
+ #endif
+ #if (OPTION_NB_ENV_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE GnbEnvInterfaceTN;
+ #define OPTION_GNBENVINTERFACETN_ENTRY {AMD_FAMILY_TN, GnbEnvInterfaceTN, TpGnbEnvInterface},
+ #else
+ #define OPTION_GNBENVINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_NB_ENV_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GnbEnvInterfaceKB;
+ #define OPTION_GNBENVINTERFACEKB_ENTRY {AMD_FAMILY_KB, GnbEnvInterfaceKB, TpGnbEnvInterface},
+ #else
+ #define OPTION_GNBENVINTERFACEKB_ENTRY
+ #endif
+
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_GFX_CONFIG_ENV_INIT
+ #define OPTION_GFX_CONFIG_ENV_INIT TRUE
+ #endif
+ #if (OPTION_GFX_CONFIG_ENV_INIT == TRUE) && (GNB_TYPE_TN == TRUE || GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GfxConfigEnvInterface;
+ #define OPTION_GFXCONFIGENVINTERFACE_ENTRY {AMD_FAMILY_TN | AMD_FAMILY_KB, GfxConfigEnvInterface, TpGnbGfxConfigEnvInterface},
+ #else
+ #define OPTION_GFXCONFIGENVINTERFACE_ENTRY
+ #endif
+
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_GFX_ENV_INIT
+ #define OPTION_GFX_ENV_INIT TRUE
+ #endif
+ #if (OPTION_GFX_ENV_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE GfxEnvInterfaceTN;
+ #define OPTION_GFXENVINTERFACETN_ENTRY {AMD_FAMILY_TN, GfxEnvInterfaceTN, TpGnbGfxEnvInterface},
+ #else
+ #define OPTION_GFXENVINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_GFX_ENV_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GfxEnvInterfaceKB;
+ #define OPTION_GFXENVINTERFACEKB_ENTRY {AMD_FAMILY_KB, GfxEnvInterfaceKB, TpGnbGfxEnvInterface},
+ #else
+ #define OPTION_GFXENVINTERFACEKB_ENTRY
+ #endif
+
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_PCIE_ENV_INIT
+ #define OPTION_PCIE_ENV_INIT TRUE
+ #endif
+ #if (OPTION_PCIE_ENV_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE PcieEnvInterfaceTN;
+ #define OPTION_PCIEENVINTERFACETN_ENTRY {AMD_FAMILY_TN, PcieEnvInterfaceTN, TpGnbPcieEnvInterface},
+ #else
+ #define OPTION_PCIEENVINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_PCIE_ENV_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE PcieEnvInterfaceKB;
+ #define OPTION_PCIEENVINTERFACEKB_ENTRY {AMD_FAMILY_KB, PcieEnvInterfaceKB, TpGnbPcieEnvInterface},
+ #else
+ #define OPTION_PCIEENVINTERFACEKB_ENTRY
+ #endif
+
+ //---------------------------------------------------------------------------------------------------
+
+ OPTION_GNB_CONFIGURATION GnbEnvFeatureTable[] = {
+ OPTION_GNBENVINTERFACETN_ENTRY
+ OPTION_GNBENVINTERFACEKB_ENTRY
+ OPTION_PCIEENVINTERFACETN_ENTRY
+ OPTION_PCIEENVINTERFACEKB_ENTRY
+ OPTION_GFXCONFIGENVINTERFACE_ENTRY
+ OPTION_GFXENVINTERFACETN_ENTRY
+ OPTION_GFXENVINTERFACEKB_ENTRY
+ {0, NULL, EndGnbTestPoints}
+ };
+ #endif
+
+ #if (AGESA_ENTRY_INIT_MID == TRUE)
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_GFX_MID_INIT
+ #define OPTION_GFX_MID_INIT TRUE
+ #endif
+ #if (OPTION_GFX_MID_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE GfxMidInterfaceTN;
+ #define OPTION_GFXMIDINTERFACETN_ENTRY {AMD_FAMILY_TN, GfxMidInterfaceTN, TpGnbGfxMidInterface},
+ #else
+ #define OPTION_GFXMIDINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_GFX_MID_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GfxMidInterfaceKB;
+ #define OPTION_GFXMIDINTERFACEKB_ENTRY {AMD_FAMILY_KB, GfxMidInterfaceKB, TpGnbGfxMidInterface},
+ #else
+ #define OPTION_GFXMIDINTERFACEKB_ENTRY
+ #endif
+
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_GFX_INTEGRATED_TABLE_INIT
+ #define OPTION_GFX_INTEGRATED_TABLE_INIT TRUE
+ #endif
+ #if (OPTION_GFX_INTEGRATED_TABLE_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE GfxIntInfoTableInterfaceTN;
+ #define OPTION_GFXINTINFOTABLEINTERFACETN_ENTRY {AMD_FAMILY_TN, GfxIntInfoTableInterfaceTN},
+ #else
+ #define OPTION_GFXINTINFOTABLEINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_GFX_INTEGRATED_TABLE_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GfxIntInfoTableInterfaceKB;
+ #define OPTION_GFXINTINFOTABLEINTERFACEKB_ENTRY {AMD_FAMILY_KB, GfxIntInfoTableInterfaceKB},
+ #else
+ #define OPTION_GFXINTINFOTABLEINTERFACEKB_ENTRY
+ #endif
+
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_PCIe_MID_INIT
+ #define OPTION_PCIe_MID_INIT TRUE
+ #endif
+ #if (OPTION_PCIe_MID_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE PcieMidInterfaceTN;
+ #define OPTION_PCIEMIDINTERFACETN_ENTRY {AMD_FAMILY_TN, PcieMidInterfaceTN, TpPcieMidInterface},
+ #else
+ #define OPTION_PCIEMIDINTERFACETN_ENTRY
+ #endif
+ #if (OPTION_PCIe_MID_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE PcieMidInterfaceKB;
+ #define OPTION_PCIEMIDINTERFACEKB_ENTRY {AMD_FAMILY_KB, PcieMidInterfaceKB, TpPcieMidInterface},
+ #else
+ #define OPTION_PCIEMIDINTERFACEKB_ENTRY
+ #endif
+
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_NB_MID_INIT
+ #define OPTION_NB_MID_INIT TRUE
+ #endif
+ #if (OPTION_NB_MID_INIT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE GnbMidInterfaceTN;
+ #define OPTION_GNBMIDINTERFACETN_ENTRY {AMD_FAMILY_TN, GnbMidInterfaceTN, TpGnbMidInterface},
+ #else
+ #define OPTION_GNBMIDINTERFACETN_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_GFX_CONFIG_POST_INIT
+ #define OPTION_GFX_CONFIG_POST_INIT TRUE
+ #endif
+ #if (OPTION_GFX_CONFIG_POST_INIT == TRUE) && (GNB_TYPE_TN == TRUE || GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GfxConfigMidInterface;
+ #define OPTION_GFXCONFIGMIDINTERFACE_ENTRY {AMD_FAMILY_TN | AMD_FAMILY_KB, GfxConfigMidInterface, TpGnbGfxConfigMidInterface},
+ #else
+ #define OPTION_GFXCONFIGMIDINTERFACE_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ #if (OPTION_NB_MID_INIT == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GnbMidInterfaceKB;
+ #define OPTION_GNBMIDINTERFACEKB_ENTRY {AMD_FAMILY_KB, GnbMidInterfaceKB, TpGnbMidInterface},
+ #else
+ #define OPTION_GNBMIDINTERFACEKB_ENTRY
+ #endif
+
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_PCIE_MAXPAYLOAD_INTERFACE
+ #define OPTION_PCIE_MAXPAYLOAD_INTERFACE TRUE
+ #endif
+ #if (OPTION_PCIE_MAXPAYLOAD_INTERFACE == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE PcieMaxPayloadInterface;
+ #define OPTION_PCIEMAXPAYLOADINTERFACE_ENTRY {AMD_FAMILY_TN | AMD_FAMILY_KB, PcieMaxPayloadInterface, TpGnbPcieMaxPayloadInterface},
+ #else
+ #define OPTION_PCIEMAXPAYLOADINTERFACE_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_PCIE_CLK_PM_INTERFACE
+ #define OPTION_PCIE_CLK_PM_INTERFACE FALSE
+ #if (GNB_TYPE_TN == TRUE && (OPTION_FS1_SOCKET_SUPPORT == TRUE || OPTION_FP1_SOCKET_SUPPORT == TRUE))
+ #undef OPTION_PCIE_CLK_PM_INTERFACE
+ #define OPTION_PCIE_CLK_PM_INTERFACE TRUE
+ #endif
+ #if (GNB_TYPE_KB == TRUE)
+ #undef OPTION_PCIE_CLK_PM_INTERFACE
+ #define OPTION_PCIE_CLK_PM_INTERFACE TRUE
+ #endif
+ #endif
+
+ #if (OPTION_PCIE_CLK_PM_INTERFACE == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE PcieClkPmInterface;
+ #define OPTION_PCIECLKPMINTERFACE_ENTRY {AMD_FAMILY_TN | AMD_FAMILY_KB, PcieClkPmInterface, TpGnbPcieClkPmInterface},
+ #else
+ #define OPTION_PCIECLKPMINTERFACE_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_PCIE_ASPM_INTERFACE
+ #define OPTION_PCIE_ASPM_INTERFACE TRUE
+ #endif
+ #if (OPTION_PCIE_ASPM_INTERFACE == TRUE) && (GNB_TYPE_TN == TRUE || GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE PcieAspmInterface;
+ #define OPTION_PCIEASPMINTERFACE_ENTRY {AMD_FAMILY_TN | AMD_FAMILY_KB, PcieAspmInterface, TpGnbPcieAspmInterface},
+ #else
+ #define OPTION_PCIEASPMINTERFACE_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_GNB_IOAPIC_INTERFACE
+ #define OPTION_GNB_IOAPIC_INTERFACE TRUE
+ #endif
+ #if (OPTION_GNB_IOAPIC_INTERFACE == TRUE) && (GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GnbNbIoapicInterface;
+ #define OPTION_GNBNBIOAPICINTERFACE_ENTRY {AMD_FAMILY_KB, GnbNbIoapicInterface, TpGnbNbIoapicInterface},
+ #else
+ #define OPTION_GNBNBIOAPICINTERFACE_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ OPTION_GNB_CONFIGURATION GnbMidFeatureTable[] = {
+ OPTION_GFXCONFIGMIDINTERFACE_ENTRY
+ OPTION_GFXMIDINTERFACETN_ENTRY
+ OPTION_GFXMIDINTERFACEKB_ENTRY
+ OPTION_GFXINTINFOTABLEINTERFACETN_ENTRY
+ OPTION_GFXINTINFOTABLEINTERFACEKB_ENTRY
+ OPTION_PCIEMIDINTERFACETN_ENTRY
+ OPTION_PCIEMIDINTERFACEKB_ENTRY
+ OPTION_GNBMIDINTERFACETN_ENTRY
+ OPTION_GNBMIDINTERFACEKB_ENTRY
+ OPTION_PCIEMAXPAYLOADINTERFACE_ENTRY
+ OPTION_PCIECLKPMINTERFACE_ENTRY
+ OPTION_PCIEASPMINTERFACE_ENTRY
+ OPTION_GNBNBIOAPICINTERFACE_ENTRY
+ {0, NULL, EndGnbTestPoints}
+ };
+ #endif
+
+ #if (AGESA_ENTRY_INIT_LATE == TRUE)
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_ALIB
+ #define OPTION_ALIB FALSE
+ #endif
+ #if (OPTION_ALIB == TRUE) && (GNB_TYPE_TN == TRUE || GNB_TYPE_KB == TRUE)
+ #define ALIB_CALL_TABLE
+ #define ALIB_CALL_TABLEV2
+ #if (GNB_TYPE_TN == TRUE)
+ #if ((OPTION_FM2_SOCKET_SUPPORT == TRUE) || (OPTION_FM2r2_SOCKET_SUPPORT == TRUE))
+ extern F_ALIB_UPDATE PcieAlibUpdatePcieMmioInfo;
+ extern F_ALIB_GET PcieAlibGetBaseTableTNFM2;
+ F_ALIB_GET *AlibGetBaseTable = PcieAlibGetBaseTableTNFM2;
+ #undef ALIB_CALL_TABLE
+ #define ALIB_CALL_TABLE PcieAlibUpdatePcieMmioInfo,
+ #else
+ extern F_ALIB_UPDATE PcieAlibUpdatePcieMmioInfo;
+ extern F_ALIB_GET PcieAlibGetBaseTableTNFS1;
+ F_ALIB_GET *AlibGetBaseTable = PcieAlibGetBaseTableTNFS1;
+ extern F_ALIB_UPDATE PcieAlibUpdateVoltageInfo;
+ extern F_ALIB_UPDATE PcieAlibUpdatePcieInfo;
+ #undef ALIB_CALL_TABLE
+ #define ALIB_CALL_TABLE PcieAlibUpdatePcieMmioInfo, \
+ PcieAlibUpdateVoltageInfo, \
+ PcieAlibUpdatePcieInfo,
+
+ #endif
+ #endif
+
+
+ #if (GNB_TYPE_KB == TRUE)
+ extern F_ALIB_GET PcieAlibGetBaseTableKB;
+ F_ALIB_GET *AlibGetBaseTableV2 = PcieAlibGetBaseTableKB;
+ extern F_ALIB_UPDATE PcieAlibUpdateVoltageData;
+ extern F_ALIB_UPDATE PcieAlibUpdatePcieData;
+ #undef ALIB_CALL_TABLEV2
+ #define ALIB_CALL_TABLEV2 PcieAlibUpdateVoltageData, \
+ PcieAlibUpdatePcieData,
+ #endif
+
+
+ F_ALIB_UPDATE* AlibDispatchTable [] = {
+ ALIB_CALL_TABLE
+ NULL
+ };
+ F_ALIB_UPDATE* AlibDispatchTableV2 [] = {
+ ALIB_CALL_TABLEV2
+ NULL
+ };
+ #if (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE PcieAlibFeature;
+ #define OPTION_PCIEALIBFEATURE_ENTRY {AMD_FAMILY_TN, PcieAlibFeature, TpGnbPcieAlibFeature},
+ #endif
+ #if ((GNB_TYPE_KB == TRUE))
+ OPTION_GNB_FEATURE PcieAlibV2Feature;
+ #define OPTION_PCIEALIBV2FEATURE_ENTRY {AMD_FAMILY_KB, PcieAlibV2Feature, TpGnbPcieAlibFeature},
+ #endif
+ #else
+ F_ALIB_GET *AlibGetBaseTable = NULL;
+ F_ALIB_GET *AlibGetBaseTableV2 = NULL;
+ F_ALIB_UPDATE* AlibDispatchTable [] = {
+ NULL
+ };
+ F_ALIB_UPDATE* AlibDispatchTableV2 [] = {
+ NULL
+ };
+ #define OPTION_PCIEALIBFEATURE_ENTRY
+ #define OPTION_PCIEALIBV2FEATURE_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_IOMMU_ACPI_IVRS
+ #if (CFG_IOMMU_SUPPORT == TRUE)
+ #define OPTION_IOMMU_ACPI_IVRS TRUE
+ #else
+ #define OPTION_IOMMU_ACPI_IVRS FALSE
+ #endif
+ #endif
+ #if (OPTION_IOMMU_ACPI_IVRS == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE GnbIommuIvrsTable;
+ #define OPTIONIOMMUACPIIVRSLATE_ENTRY {AMD_FAMILY_TN, GnbIommuIvrsTable},
+ #else
+ #define OPTIONIOMMUACPIIVRSLATE_ENTRY
+ #endif
+ #if (CFG_IOMMU_SUPPORT == TRUE) && (GNB_TYPE_TN == TRUE)
+ OPTION_GNB_FEATURE GnbIommuScratchMemoryRangeInterface;
+ #define OPTIONIOMMUSCRATCHMEMORYLATE_ENTRY {AMD_FAMILY_TN, GnbIommuScratchMemoryRangeInterface, TpGnbIommuIvrsTable},
+ #else
+ #define OPTIONIOMMUSCRATCHMEMORYLATE_ENTRY
+ #endif
+ //---------------------------------------------------------------------------------------------------
+ OPTION_GNB_CONFIGURATION GnbLateFeatureTable[] = {
+ #if (GNB_TYPE_TN == TRUE)
+ OPTION_PCIEALIBFEATURE_ENTRY
+ #endif
+ #if ((GNB_TYPE_KB == TRUE))
+ OPTION_PCIEALIBV2FEATURE_ENTRY
+ #endif
+ OPTIONIOMMUSCRATCHMEMORYLATE_ENTRY
+ OPTIONIOMMUACPIIVRSLATE_ENTRY
+ {0, NULL, EndGnbTestPoints}
+ };
+ #endif
+
+ #if (AGESA_ENTRY_INIT_S3SAVE == TRUE)
+ //---------------------------------------------------------------------------------------------------
+ #ifndef OPTION_GFX_INIT_SVIEW
+ #define OPTION_GFX_INIT_SVIEW TRUE
+ #endif
+ #if (OPTION_GFX_INIT_SVIEW == TRUE) && (GNB_TYPE_TN == TRUE || GNB_TYPE_KB == TRUE)
+ OPTION_GNB_FEATURE GfxInitSview;
+ #define OPTION_GFXINITSVIEW_ENTRY {AMD_FAMILY_TN | AMD_FAMILY_KB, GfxInitSview},
+ #else
+ #define OPTION_GFXINITSVIEW_ENTRY
+ #endif
+
+ OPTION_GNB_CONFIGURATION GnbS3SaveFeatureTable[] = {
+ OPTION_GFXINITSVIEW_ENTRY
+ {0, NULL, EndGnbTestPoints}
+ };
+ #endif
+
+ #if (GNB_TYPE_TN == TRUE || GNB_TYPE_KB == TRUE)
+ #define GNBS3RESTOREV4
+ #define GNBS3RESTOREV7
+ #if (GNB_TYPE_TN == TRUE)
+ S3_DISPATCH_FUNCTION GnbSmuServiceRequestV4S3Script;
+ #undef GNBS3RESTOREV4
+ #define GNBS3RESTOREV4 {GnbSmuServiceRequestV4S3Script_ID, GnbSmuServiceRequestV4S3Script},
+ #endif
+ #if (GNB_TYPE_KB == TRUE)
+ S3_DISPATCH_FUNCTION GnbSmuServiceRequestV7S3Script;
+ #undef GNBS3RESTOREV7
+ #define GNBS3RESTOREV7 {GnbSmuServiceRequestV7S3Script_ID, GnbSmuServiceRequestV7S3Script},
+ #endif
+ S3_DISPATCH_FUNCTION GnbLibStallS3Script;
+ #define PCIELATERESTORETN
+ #define PCIELATERESTOREKB
+ #define GFXSCLKRESTORETN
+ #if (GNB_TYPE_TN == TRUE)
+ S3_DISPATCH_FUNCTION PcieLateRestoreInitTNS3Script;
+ S3_DISPATCH_FUNCTION GfxRequestSclkTNS3Script;
+ #undef PCIELATERESTORETN
+ #define PCIELATERESTORETN {PcieLateRestoreTNS3Script_ID, PcieLateRestoreInitTNS3Script},
+ #undef GFXSCLKRESTORETN
+ #define GFXSCLKRESTORETN {GfxRequestSclkTNS3Script_ID, GfxRequestSclkTNS3Script },
+ #endif
+ #if (GNB_TYPE_KB == TRUE)
+ S3_DISPATCH_FUNCTION PcieLateRestoreInitKBS3Script;
+ #undef PCIELATERESTOREKB
+ #define PCIELATERESTOREKB {PcieLateRestoreKBS3Script_ID, PcieLateRestoreInitKBS3Script},
+ #endif
+ #define GNB_S3_DISPATCH_FUNCTION_TABLE \
+ GNBS3RESTOREV4 \
+ GNBS3RESTOREV7 \
+ PCIELATERESTORETN \
+ GFXSCLKRESTORETN \
+ PCIELATERESTOREKB \
+ {GnbLibStallS3Script_ID, GnbLibStallS3Script},
+
+
+
+#endif
+
+#endif
+#endif // _OPTION_GNB_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionHtInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionHtInstall.h
new file mode 100644
index 0000000..06c5463
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionHtInstall.h
@@ -0,0 +1,244 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Ht
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84154 $ @e \$Date: 2012-12-12 17:02:37 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_HT_INSTALL_H_
+#define _OPTION_HT_INSTALL_H_
+
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNb.h"
+#include "htTopologies.h"
+/*
+ * Advanced Option only, hardware socket naming is the preferred method.
+ */
+#ifdef BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP
+ #define CFG_SYSTEM_PHYSICAL_SOCKET_MAP (BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP)
+#else
+ #define CFG_SYSTEM_PHYSICAL_SOCKET_MAP (NULL)
+#endif
+
+/*
+ * OPTION_IS_RECOVERY_HT is true if Basic API is being used.
+ */
+#ifndef OPTION_IS_RECOVERY_HT
+ #define OPTION_IS_RECOVERY_HT TRUE
+#endif
+
+/*
+ * Macros will generate the correct item reference based on options
+ */
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ // Select the interface and features
+ #if ((OPTION_FAMILY15H_TN == TRUE) || (OPTION_FAMILY16H_KB == TRUE))
+ #define INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES NULL
+ #define INTERNAL_HT_OPTION_FEATURES &HtFeaturesNone
+ #define INTERNAL_HT_OPTION_INTERFACE &HtInterfaceMapsOnly
+ #endif
+ // Select Northbridge components
+ #if OPTION_FAMILY15H == TRUE
+ #if OPTION_FAMILY15H_TN == TRUE
+ #define INTERNAL_HT_OPTION_FAM15TN_NB &HtFam15Mod1xNb,
+ #else
+ #define INTERNAL_HT_OPTION_FAM15TN_NB
+ #endif
+ #else
+ #define INTERNAL_HT_OPTION_FAM15TN_NB
+ #endif
+
+ #if OPTION_FAMILY16H == TRUE
+ #if OPTION_FAMILY16H_KB == TRUE
+ #define INTERNAL_HT_OPTION_FAM16KB_NB &HtFam16Nb,
+ #else
+ #define INTERNAL_HT_OPTION_FAM16KB_NB
+ #endif
+ #else
+ #define INTERNAL_HT_OPTION_FAM16KB_NB
+ #endif
+
+ #define INTERNAL_ONLY_NB_LIST_ITEM INTERNAL_ONLY_HT_OPTION_SUPPORTED_NBS,
+ #ifndef INTERNAL_ONLY_HT_OPTION_SUPPORTED_NBS
+ #undef INTERNAL_ONLY_NB_LIST_ITEM
+ #define INTERNAL_ONLY_NB_LIST_ITEM
+ #endif
+
+ /* Install the correct set of northbridge implementations. Each item provides its own comma, the last item
+ * is ok to have a comma because the final item (NULL) is added below.
+ */
+ #define INTERNAL_HT_OPTION_SUPPORTED_NBS \
+ INTERNAL_ONLY_NB_LIST_ITEM \
+ INTERNAL_HT_OPTION_FAM15TN_NB \
+ INTERNAL_HT_OPTION_FAM16KB_NB
+
+
+
+
+#else
+ // Not Init Early
+ #define INTERNAL_HT_OPTION_FEATURES NULL
+ #define INTERNAL_HT_OPTION_INTERFACE NULL
+ #define INTERNAL_HT_OPTION_SUPPORTED_NBS NULL
+ #define HT_OPTIONS_PLATFORM NULL
+ #define INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES NULL
+#endif
+
+#ifdef AGESA_ENTRY_INIT_EARLY
+ #if AGESA_ENTRY_INIT_EARLY == TRUE
+
+ extern HT_FEATURES HtFeaturesDefault;
+ extern HT_FEATURES HtFeaturesCoherentOnly;
+ extern HT_FEATURES HtFeaturesNone;
+ extern HT_INTERFACE HtInterfaceDefault;
+ extern HT_INTERFACE HtInterfaceCoherentOnly;
+ extern HT_INTERFACE HtInterfaceMapsOnly;
+ extern HT_INTERFACE HtInterfaceNone;
+ extern NORTHBRIDGE HtFam15Mod4xNb;
+ extern NORTHBRIDGE HtFam15Mod1xNb;
+ extern NORTHBRIDGE HtFam16Nb;
+
+ CONST VOID * CONST ROMDATA HtInstalledFamilyNorthbridgeList[] = {
+ INTERNAL_HT_OPTION_SUPPORTED_NBS
+ NULL
+ };
+
+ STATIC CONST AMD_HT_INTERFACE ROMDATA HtOptionsPlatform =
+ {
+ CFG_STARTING_BUSNUM, CFG_MAXIMUM_BUSNUM, CFG_ALLOCATED_BUSNUM,
+ (MANUAL_BUID_SWAP_LIST *)CFG_BUID_SWAP_LIST,
+ (DEVICE_CAP_OVERRIDE *)CFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST,
+ (CPU_TO_CPU_PCB_LIMITS *)CFG_HTFABRIC_LIMITS_LIST,
+ (IO_PCB_LIMITS *)CFG_HTCHAIN_LIMITS_LIST,
+ (OVERRIDE_BUS_NUMBERS *)CFG_BUS_NUMBERS_LIST,
+ (IGNORE_LINK *)CFG_IGNORE_LINK_LIST,
+ (SKIP_REGANG *)CFG_LINK_SKIP_REGANG_LIST,
+ (UINT8 **)CFG_ADDITIONAL_TOPOLOGIES_LIST,
+ (SYSTEM_PHYSICAL_SOCKET_MAP *)CFG_SYSTEM_PHYSICAL_SOCKET_MAP
+ };
+ #ifndef HT_OPTIONS_PLATFORM
+ #define HT_OPTIONS_PLATFORM &HtOptionsPlatform
+ #endif
+
+ /**
+ * A list of all the supported topologies.
+ *
+ */
+ #ifndef INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES
+ CONST UINT8 *CONST ROMDATA AmdTopolist[] =
+ {
+ amdHtTopologySingleNode,
+ amdHtTopologyDualNode,
+ amdHtTopologyThreeLine,
+ amdHtTopologyTriangle,
+ amdHtTopologyFourLine,
+ amdHtTopologyFourStar,
+ amdHtTopologyFourDegenerate,
+ amdHtTopologyFourSquare,
+ amdHtTopologyFourKite,
+ amdHtTopologyFourFully,
+ amdHtTopologyFiveFully,
+ amdHtTopologyFiveTwistedLadder,
+ amdHtTopologySixFully,
+ amdHtTopologySixDoubloonLower,
+ amdHtTopologySixDoubloonUpper,
+ amdHtTopologySixTwistedLadder,
+ amdHtTopologySevenFully,
+ amdHtTopologySevenTwistedLadder,
+ amdHtTopologyEightFully,
+ amdHtTopologyEightDoubloon,
+ amdHtTopologyEightTwistedLadder,
+ amdHtTopologyEightStraightLadder,
+ amdHtTopologySixTwinTriangles,
+ amdHtTopologyEightTwinFullyFourWays,
+ NULL
+ };
+ #define INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES AmdTopolist
+ #endif
+
+ /**
+ * Declare the instance of the Ht option configuration structure
+ */
+ CONST OPTION_HT_CONFIGURATION ROMDATA OptionHtConfiguration = {
+ OPTION_IS_RECOVERY_HT,
+ CFG_SET_HTCRC_SYNC_FLOOD,
+ CFG_USE_UNIT_ID_CLUMPING,
+ HT_OPTIONS_PLATFORM,
+ INTERNAL_HT_OPTION_INTERFACE,
+ INTERNAL_HT_OPTION_FEATURES,
+ &HtInstalledFamilyNorthbridgeList,
+ INTERNAL_HT_OPTION_BUILTIN_TOPOLOGIES
+ };
+
+ #endif
+#endif
+
+#ifndef OPTION_HT_INIIT_RESET_ENTRY
+
+ #define OPTION_HT_INIIT_RESET_ENTRY AmdHtInitReset
+ #define OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY AmdHtResetConstructor
+
+ #if ((OPTION_FAMILY15H_TN == TRUE) || (OPTION_FAMILY16H == TRUE))
+ #undef OPTION_HT_INIIT_RESET_ENTRY
+ #undef OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY
+ #define OPTION_HT_INIIT_RESET_ENTRY NULL
+ #define OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY NULL
+ #endif
+
+#endif
+
+#ifdef AGESA_ENTRY_INIT_RESET
+ #if AGESA_ENTRY_INIT_RESET == TRUE
+
+ CONST AMD_HT_RESET_INTERFACE ROMDATA HtOptionResetDefaults = {
+ (MANUAL_BUID_SWAP_LIST *)CFG_BUID_SWAP_LIST,
+ 0 // Unused by options
+ };
+
+ CONST OPTION_HT_INIT_RESET ROMDATA HtOptionInitReset = {
+ OPTION_HT_INIIT_RESET_ENTRY,
+ OPTION_HT_INIIT_RESET_CONSTRUCTOR_ENTRY
+ };
+ #endif
+
+#endif
+
+#endif // _OPTION_HT_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionHtcInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionHtcInstall.h
new file mode 100644
index 0000000..8f5079c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionHtcInstall.h
@@ -0,0 +1,102 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Hardware Thermal Control (HTC).
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_HTC_INSTALL_H_
+#define _OPTION_HTC_INSTALL_H_
+
+#include "cpuHtc.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_CPU_HTC_FEAT
+#define F15_TN_HTC_SUPPORT
+#define F16_KB_HTC_SUPPORT
+
+#if OPTION_CPU_HTC == TRUE
+ #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ // Family 15h
+ #ifdef OPTION_FAMILY15H
+ #if OPTION_FAMILY15H == TRUE
+ #if OPTION_FAMILY15H_TN == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureHtc;
+ #undef OPTION_CPU_HTC_FEAT
+ #define OPTION_CPU_HTC_FEAT &CpuFeatureHtc,
+ extern CONST HTC_FAMILY_SERVICES ROMDATA F15TnHtcSupport;
+ #undef F15_TN_HTC_SUPPORT
+ #define F15_TN_HTC_SUPPORT {AMD_FAMILY_15_TN, &F15TnHtcSupport},
+ #endif
+ #endif
+ #endif
+
+ // Family 16h
+ #ifdef OPTION_FAMILY16H
+ #if OPTION_FAMILY16H == TRUE
+ #if OPTION_FAMILY16H_KB == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureHtc;
+ #undef OPTION_CPU_HTC_FEAT
+ #define OPTION_CPU_HTC_FEAT &CpuFeatureHtc,
+ extern CONST HTC_FAMILY_SERVICES ROMDATA F16KbHtcSupport;
+ #undef F16_KB_HTC_SUPPORT
+ #define F16_KB_HTC_SUPPORT {AMD_FAMILY_16_KB, &F16KbHtcSupport},
+ #endif
+ #endif
+ #endif
+ #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA HtcFamilyServiceArray[] =
+{
+ F15_TN_HTC_SUPPORT
+ F16_KB_HTC_SUPPORT
+ {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA HtcFamilyServiceTable =
+{
+ (sizeof (HtcFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &HtcFamilyServiceArray[0]
+};
+
+#endif // _OPTION_HTC_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionIdsInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionIdsInstall.h
new file mode 100644
index 0000000..b5a566f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionIdsInstall.h
@@ -0,0 +1,506 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * IDS Option Install File
+ *
+ * This file generates the defaults tables for family 10h model 5 processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+#ifndef _OPTION_IDS_INSTALL_H_
+#define _OPTION_IDS_INSTALL_H_
+#include "Ids.h"
+#include "IdsHt.h"
+#include "IdsLib.h"
+#include "IdsDebugPrint.h"
+#ifdef __IDS_EXTENDED__
+ #include OPTION_IDS_EXT_INSTALL_FILE
+#endif
+
+#define IDS_LATE_RUN_AP_TASK
+
+#define M_HTIDS_PORT_OVERRIDE_HOOK (PF_HtIdsGetPortOverride)CommonVoid
+#if (IDSOPT_IDS_ENABLED == TRUE)
+ #if (IDSOPT_CONTROL_ENABLED == TRUE)
+ // Check for all families which include HT Features.To add new family support replace FALSE
+ #if (FALSE) && (AGESA_ENTRY_INIT_POST == TRUE)
+ #undef M_HTIDS_PORT_OVERRIDE_HOOK
+ #define M_HTIDS_PORT_OVERRIDE_HOOK HtIdsGetPortOverride
+ #endif
+ #endif
+#endif // OPTION_IDS_LEVEL
+CONST PF_HtIdsGetPortOverride ROMDATA pf_HtIdsGetPortOverride = M_HTIDS_PORT_OVERRIDE_HOOK;
+
+#if (IDSOPT_IDS_ENABLED == TRUE)
+ #if (AGESA_ENTRY_INIT_LATE == TRUE)
+ #undef IDS_LATE_RUN_AP_TASK
+ #define IDS_LATE_RUN_AP_TASK {IDS_LATE_RUN_AP_TASK_ID, (IMAGE_ENTRY)AmdIdsRunApTaskLate},
+ #endif
+#endif // OPTION_IDS_LEVEL
+
+#if (IDSOPT_TRACING_ENABLED == TRUE)
+ #if (AGESA_ENTRY_INIT_POST == TRUE)
+ #include <mu.h>
+ CONST SCRIPT_FUNCTION ROMDATA ScriptFuncList[] = {
+ { (UINT32) MemUWriteCachelines, "WriteCl(PhyAddrLo,BufferAddr,ClCnt)"},
+ { (UINT32) MemUReadCachelines, "ReadCl(BufferAddr,PhyAddrLo,ClCnt)"},
+ { (UINT32) MemUFlushPattern, "FlushCl(PhyAddrLo,ClCnt)"}
+ };
+ #elif (AGESA_ENTRY_INIT_RECOVERY == TRUE)
+ #include <mru.h>
+ CONST SCRIPT_FUNCTION ROMDATA ScriptFuncList[] = {
+ { (UINT32) (UINT64) MemRecUWrite1CL, "Write1Cl(PhyAddrLo,BufferAddr)"},
+ { (UINT32) (UINT64) MemRecURead1CL, "Read1Cl(BufferAddr,PhyAddrLo)"},
+ { (UINT32) (UINT64) MemRecUFlushPattern, "Flush1Cl(PhyAddrLo)"}
+ };
+ #else
+ CONST SCRIPT_FUNCTION ROMDATA ScriptFuncList[] = {
+ { (UINT32) (UINT64) CommonReturnFalse, "DefRet()"},
+ { (UINT32) (UINT64) CommonReturnFalse, "DefRet()"},
+ { (UINT32) (UINT64) CommonReturnFalse, "DefRet()"}
+ };
+ #endif
+#else
+ CONST SCRIPT_FUNCTION ROMDATA ScriptFuncList[] = {
+ { (UINT32) CommonReturnFalse, "DefRet()"},
+ { (UINT32) CommonReturnFalse, "DefRet()"},
+ { (UINT32) CommonReturnFalse, "DefRet()"}
+ };
+#endif
+
+
+#define NV_TO_CMOS(Len, NV_ID) {Len, NV_ID},
+#define OPTION_IDS_NV_TO_CMOS_END NV_TO_CMOS (IDS_NV_TO_CMOS_LEN_END, IDS_NV_TO_CMOS_ID_END)
+#if (IDSOPT_IDS_ENABLED == TRUE)
+ #if ((IDSOPT_CONTROL_ENABLED == TRUE) && \
+ ((AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_ENV == TRUE) || \
+ (AGESA_ENTRY_INIT_MID == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || \
+ (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE)))
+ #if (IDSOPT_CONTROL_NV_TO_CMOS == TRUE)
+ #define OPTION_IDS_NV_TO_CMOS_COMMON
+
+ //Family 15h TN
+ #ifdef OPTION_FAMILY15H_TN
+ #if OPTION_FAMILY15H_TN == TRUE
+ #define OPTION_IDS_NV_TO_CMOS_F15_TN\
+ {IDS_NV_TO_CMOS_LEN_BYTE, AGESA_IDS_NV_UCODE},
+ #endif
+ #endif
+
+ #ifndef OPTION_IDS_NV_TO_CMOS_F15_TN
+ #define OPTION_IDS_NV_TO_CMOS_F15_TN
+ #endif
+
+
+ //Family 16h KB
+ #ifdef OPTION_FAMILY16H_KB
+ #if OPTION_FAMILY16H_KB == TRUE
+ #define OPTION_IDS_NV_TO_CMOS_F16_KB\
+ {IDS_NV_TO_CMOS_LEN_BYTE, AGESA_IDS_NV_UCODE},
+ #endif
+ #endif
+
+ #ifndef OPTION_IDS_NV_TO_CMOS_F16_KB
+ #define OPTION_IDS_NV_TO_CMOS_F16_KB
+ #endif
+
+ #ifndef OPTION_IDS_NV_TO_CMOS_EXTEND
+ #define OPTION_IDS_NV_TO_CMOS_EXTEND
+ #endif
+
+ IDS_NV_TO_CMOS gIdsNVToCmos[] = {
+ OPTION_IDS_NV_TO_CMOS_COMMON
+ OPTION_IDS_NV_TO_CMOS_F15_TN
+ OPTION_IDS_NV_TO_CMOS_F16_KB
+ OPTION_IDS_NV_TO_CMOS_EXTEND
+ OPTION_IDS_NV_TO_CMOS_END
+ };
+ #else
+ IDS_NV_TO_CMOS gIdsNVToCmos[] = {
+ OPTION_IDS_NV_TO_CMOS_END
+ };
+ #endif
+ #else
+ IDS_NV_TO_CMOS gIdsNVToCmos[] = {
+ OPTION_IDS_NV_TO_CMOS_END
+ };
+ #endif
+#else
+ IDS_NV_TO_CMOS gIdsNVToCmos[] = {
+ OPTION_IDS_NV_TO_CMOS_END
+ };
+#endif
+
+///Ids Feat Options
+#if ((IDSOPT_IDS_ENABLED == TRUE) && \
+ ((AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_ENV == TRUE) || \
+ (AGESA_ENTRY_INIT_MID == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || \
+ (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE)))
+ #if (IDSOPT_CONTROL_ENABLED == TRUE)
+ #ifndef OPTION_IDS_EXTEND_FEATS
+ #define OPTION_IDS_EXTEND_FEATS
+ #endif
+
+ #define OPTION_IDS_FEAT_ECCCTRL
+
+ #define OPTION_IDS_FEAT_GNB_PLATFORMCFG\
+ OPTION_IDS_FEAT_GNB_PLATFORMCFGF15TN \
+ OPTION_IDS_FEAT_GNB_PLATFORMCFGF16KB
+
+
+ #define OPTION_IDS_FEAT_CPB_CTRL
+
+ #define OPTION_IDS_FEAT_HTC_CTRL\
+ OPTION_IDS_FEAT_HTC_CTRL_F15_TN \
+ OPTION_IDS_FEAT_HTC_CTRL_F16_KB
+
+
+ #define OPTION_IDS_FEAT_MEMORY_MAPPING\
+ OPTION_IDS_FEAT_MEMORY_MAPPING_F15_TN \
+ OPTION_IDS_FEAT_MEMORY_MAPPING_F16_KB
+
+
+ #define OPTION_IDS_FEAT_HT_ASSIST
+
+/*----------------------------------------------------------------------------
+ * Family 15 TN feat blocks
+ *
+ *----------------------------------------------------------------------------
+ */
+ #define OPTION_IDS_FEAT_HTC_CTRL_F15_TN
+ #define OPTION_IDS_FEAT_MEMORY_MAPPING_F15_TN
+ #define OPTION_IDS_FEAT_GNB_PLATFORMCFGF15TN
+ #ifdef OPTION_FAMILY15H_TN
+ #if OPTION_FAMILY15H_TN == TRUE
+ extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatHtcControlBlockF15Tn;
+ #undef OPTION_IDS_FEAT_HTC_CTRL_F15_TN
+ #define OPTION_IDS_FEAT_HTC_CTRL_F15_TN\
+ &IdsFeatHtcControlBlockF15Tn,
+
+ extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatMemoryMappingPostBeforeBlockF15Tn;
+ extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatMemoryMappingChIntlvBlockF15Tn;
+ #undef OPTION_IDS_FEAT_MEMORY_MAPPING_F15_TN
+ #define OPTION_IDS_FEAT_MEMORY_MAPPING_F15_TN\
+ &IdsFeatMemoryMappingPostBeforeBlockF15Tn,\
+ &IdsFeatMemoryMappingChIntlvBlockF15Tn,
+
+ extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatGnbPlatformCfgBlockF15Tn;
+ #undef OPTION_IDS_FEAT_GNB_PLATFORMCFGF15TN
+ #define OPTION_IDS_FEAT_GNB_PLATFORMCFGF15TN &IdsFeatGnbPlatformCfgBlockF15Tn,
+ #endif
+ #endif
+
+
+/*----------------------------------------------------------------------------
+ * Family 16 KB feat blocks
+ *
+ *----------------------------------------------------------------------------
+ */
+ #define OPTION_IDS_FEAT_HTC_CTRL_F16_KB
+ #define OPTION_IDS_FEAT_MEMORY_MAPPING_F16_KB
+ #define OPTION_IDS_FEAT_GNB_PLATFORMCFGF16KB
+ #ifdef OPTION_FAMILY16H_KB
+ #if OPTION_FAMILY16H_KB == TRUE
+ extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatHtcControlBlockF16Kb;
+ #undef OPTION_IDS_FEAT_HTC_CTRL_F16_KB
+ #define OPTION_IDS_FEAT_HTC_CTRL_F16_KB\
+ &IdsFeatHtcControlBlockF16Kb,
+
+ extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatMemoryMappingPostBeforeBlockF16Kb;
+ #undef OPTION_IDS_FEAT_MEMORY_MAPPING_F16_KB
+ #define OPTION_IDS_FEAT_MEMORY_MAPPING_F16_KB\
+ &IdsFeatMemoryMappingPostBeforeBlockF16Kb,
+
+ extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatGnbPlatformCfgBlockF16Kb;
+ #undef OPTION_IDS_FEAT_GNB_PLATFORMCFGF16KB
+ #define OPTION_IDS_FEAT_GNB_PLATFORMCFGF16KB &IdsFeatGnbPlatformCfgBlockF16Kb,
+ #endif
+ #endif
+
+ #define OPTION_IDS_FEAT_NV_TO_CMOS
+ #if IDSOPT_CONTROL_NV_TO_CMOS == TRUE
+ #undef OPTION_IDS_FEAT_NV_TO_CMOS
+ extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatNvToCmosSaveBlock;
+ extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatNvToCmosRestoreBlock;
+ #define OPTION_IDS_FEAT_NV_TO_CMOS\
+ &IdsFeatNvToCmosSaveBlock, \
+ &IdsFeatNvToCmosRestoreBlock,
+
+ #endif
+
+ CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatUcodeBlock =
+ {
+ IDS_FEAT_UCODE_UPDATE,
+ IDS_ALL_CORES,
+ IDS_UCODE,
+ IDS_FAMILY_ALL,
+ IdsSubUCode
+ };
+
+ CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatPowerPolicyBlock =
+ {
+ IDS_FEAT_POWER_POLICY,
+ IDS_ALL_CORES,
+ IDS_PLATFORMCFG_OVERRIDE,
+ IDS_FAMILY_ALL,
+ IdsSubPowerPolicyOverride
+ };
+
+ CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatTargetPstateBlock =
+ {
+ IDS_FEAT_TARGET_PSTATE,
+ IDS_BSP_ONLY,
+ IDS_INIT_LATE_AFTER,
+ IDS_FAMILY_ALL,
+ IdsSubTargetPstate
+ };
+
+ CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatPostPstateBlock =
+ {
+ IDS_FEAT_POSTPSTATE,
+ IDS_ALL_CORES,
+ IDS_CPU_Early_Override,
+ IDS_FAMILY_ALL,
+ IdsSubPostPState
+ };
+
+ //Dram controller Features
+ CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatDctAllMemClkBlock =
+ {
+ IDS_FEAT_DCT_ALLMEMCLK,
+ IDS_BSP_ONLY,
+ IDS_ALL_MEMORY_CLOCK,
+ IDS_FAMILY_ALL,
+ IdsSubAllMemClkEn
+ };
+
+ CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatDctGangModeBlock =
+ {
+ IDS_FEAT_DCT_GANGMODE,
+ IDS_BSP_ONLY,
+ IDS_GANGING_MODE,
+ IDS_FAMILY_ALL,
+ IdsSubGangingMode
+ };
+
+ CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatDctPowerDownCtrlBlock =
+ {
+ IDS_FEAT_DCT_POWERDOWN,
+ IDS_BSP_ONLY,
+ IDS_INIT_POST_BEFORE,
+ IDS_FAMILY_ALL,
+ IdsSubPowerDownCtrl
+ };
+
+ CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatDctPowerDownModeBlock =
+ {
+ IDS_FEAT_DCT_POWERDOWN,
+ IDS_BSP_ONLY,
+ IDS_POWERDOWN_MODE,
+ IDS_FAMILY_ALL,
+ IdsSubPowerDownMode
+ };
+
+ CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatHdtOutBlock =
+ {
+ IDS_FEAT_HDTOUT,
+ IDS_BSP_ONLY,
+ IDS_INIT_EARLY_BEFORE,
+ IDS_FAMILY_ALL,
+ IdsSubHdtOut
+ };
+
+ CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatHtSettingBlock =
+ {
+ IDS_FEAT_HT_SETTING,
+ IDS_BSP_ONLY,
+ IDS_HT_CONTROL,
+ IDS_FAMILY_ALL,
+ IdsSubHtLinkControl
+ };
+
+ CONST IDS_FAMILY_FEAT_STRUCT* ROMDATA IdsControlFeats[] =
+ {
+ &IdsFeatUcodeBlock,
+ &IdsFeatPowerPolicyBlock,
+
+ &IdsFeatTargetPstateBlock,
+
+ &IdsFeatPostPstateBlock,
+
+ OPTION_IDS_FEAT_NV_TO_CMOS
+
+ OPTION_IDS_FEAT_ECCCTRL
+
+ &IdsFeatDctAllMemClkBlock,
+
+ &IdsFeatDctGangModeBlock,
+
+ &IdsFeatDctPowerDownCtrlBlock,
+
+ &IdsFeatDctPowerDownModeBlock,
+
+ &IdsFeatDctPowerDownModeBlock,
+
+ OPTION_IDS_FEAT_HT_ASSIST
+
+ &IdsFeatHdtOutBlock,
+
+ &IdsFeatHtSettingBlock,
+
+ OPTION_IDS_FEAT_GNB_PLATFORMCFG
+
+ OPTION_IDS_FEAT_CPB_CTRL
+
+ OPTION_IDS_FEAT_HTC_CTRL
+
+ OPTION_IDS_FEAT_MEMORY_MAPPING
+
+ OPTION_IDS_EXTEND_FEATS
+
+ NULL
+ };
+ #else
+ CONST IDS_FAMILY_FEAT_STRUCT* ROMDATA IdsControlFeats[] =
+ {
+ NULL
+ };
+ #endif//IDSOPT_CONTROL_ENABLED
+
+ #define OPTION_IDS_FAM_REGACC_F15TN
+ #ifdef OPTION_FAMILY15H_TN
+ #if OPTION_FAMILY15H_TN == TRUE
+ extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatRegGmmxF15Tn;
+ #undef OPTION_IDS_FAM_REGACC_F15TN
+ #define OPTION_IDS_FAM_REGACC_F15TN \
+ &IdsFeatRegGmmxF15Tn,
+ #endif
+ #endif
+
+
+ #define OPTION_IDS_FAM_REGACC_F16KB
+ #ifdef OPTION_FAMILY16H_KB
+ #if OPTION_FAMILY16H_KB == TRUE
+ extern CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatRegGmmxF16Kb;
+ #undef OPTION_IDS_FAM_REGACC_F16KB
+ #define OPTION_IDS_FAM_REGACC_F16KB \
+ &IdsFeatRegGmmxF16Kb,
+ #endif
+ #endif
+
+ CONST IDS_FAMILY_FEAT_STRUCT* ROMDATA IdsRegAccessTbl[] =
+ {
+ OPTION_IDS_FAM_REGACC_F15TN
+ OPTION_IDS_FAM_REGACC_F16KB
+ NULL
+ };
+
+/*----------------------------------------------------------------------------
+ * IDS TRACING SERVICES
+ *
+ *----------------------------------------------------------------------------
+ */
+ #if IDSOPT_TRACING_ENABLED == TRUE
+ #define IDS_TRACING_CONSOLE_HDTOUT
+ #define IDS_TRACING_CONSOLE_SERIALPORT
+ #define IDS_TRACING_CONSOLE_REDIRECT_IO
+ #define IDS_TRACING_CONSOLE_RAM
+
+ #ifdef IDSOPT_TRACING_CONSOLE_HDTOUT
+ #if IDSOPT_TRACING_CONSOLE_HDTOUT == TRUE
+ #undef IDS_TRACING_CONSOLE_HDTOUT
+ extern CONST IDS_DEBUG_PRINT ROMDATA IdsDebugPrintHdtoutInstance;
+ #define IDS_TRACING_CONSOLE_HDTOUT &IdsDebugPrintHdtoutInstance,
+ #endif
+ #endif
+
+ #ifdef IDSOPT_TRACING_CONSOLE_SERIALPORT
+ #if IDSOPT_TRACING_CONSOLE_SERIALPORT == TRUE
+ #undef IDS_TRACING_CONSOLE_SERIALPORT
+ extern CONST IDS_DEBUG_PRINT ROMDATA IdsDebugPrintSerialInstance;
+ #define IDS_TRACING_CONSOLE_SERIALPORT &IdsDebugPrintSerialInstance,
+ #endif
+ #endif
+
+ #ifdef IDSOPT_TRACING_CONSOLE_REDIRECT_IO
+ #if IDSOPT_TRACING_CONSOLE_REDIRECT_IO == TRUE
+ #undef IDS_TRACING_CONSOLE_REDIRECT_IO
+ extern CONST IDS_DEBUG_PRINT ROMDATA IdsDebugPrintRedirectIoInstance;
+ #define IDS_TRACING_CONSOLE_REDIRECT_IO &IdsDebugPrintRedirectIoInstance,
+ #endif
+ #endif
+
+ #ifdef IDSOPT_TRACING_CONSOLE_RAM
+ #if IDSOPT_TRACING_CONSOLE_RAM == TRUE
+ #undef IDS_TRACING_CONSOLE_RAM
+ extern CONST IDS_DEBUG_PRINT ROMDATA IdsDebugPrintRamInstance;
+ #define IDS_TRACING_CONSOLE_RAM &IdsDebugPrintRamInstance,
+ #endif
+ #endif
+
+
+ CONST IDS_DEBUG_PRINT* ROMDATA IdsDebugPrint[] =
+ {
+ IDS_TRACING_CONSOLE_SERIALPORT
+ IDS_TRACING_CONSOLE_HDTOUT
+ IDS_TRACING_CONSOLE_REDIRECT_IO
+ IDS_TRACING_CONSOLE_RAM
+ NULL
+ };
+ #else
+ CONST IDS_DEBUG_PRINT* ROMDATA IdsDebugPrint[] =
+ {
+ NULL
+ };
+ #endif
+
+#else
+ CONST IDS_FAMILY_FEAT_STRUCT* ROMDATA IdsControlFeats[] =
+ {
+ NULL
+ };
+
+ CONST IDS_FAMILY_FEAT_STRUCT* ROMDATA IdsRegAccessTbl[] =
+ {
+ NULL
+ };
+
+ CONST IDS_DEBUG_PRINT* ROMDATA IdsDebugPrint[] =
+ {
+ NULL
+ };
+#endif// IDSOPT_IDS_ENABLED
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionIoCstateInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionIoCstateInstall.h
new file mode 100644
index 0000000..e466c9e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionIoCstateInstall.h
@@ -0,0 +1,103 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: IO C-state
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_IO_CSTATE_INSTALL_H_
+#define _OPTION_IO_CSTATE_INSTALL_H_
+
+#include "cpuIoCstate.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+
+#define OPTION_IO_CSTATE_FEAT
+#define F15_TN_IO_CSTATE_SUPPORT
+#define F16_KB_IO_CSTATE_SUPPORT
+
+#if OPTION_IO_CSTATE == TRUE
+ #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ #ifdef OPTION_FAMILY15H
+ #if OPTION_FAMILY15H == TRUE
+ #if OPTION_FAMILY15H_TN == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureIoCstate;
+ #undef OPTION_IO_CSTATE_FEAT
+ #define OPTION_IO_CSTATE_FEAT &CpuFeatureIoCstate,
+ extern CONST IO_CSTATE_FAMILY_SERVICES ROMDATA F15TnIoCstateSupport;
+ #undef F15_TN_IO_CSTATE_SUPPORT
+ #define F15_TN_IO_CSTATE_SUPPORT {AMD_FAMILY_15_TN, &F15TnIoCstateSupport},
+ #endif
+
+ #endif
+ #endif
+
+ #ifdef OPTION_FAMILY16H
+ #if OPTION_FAMILY16H == TRUE
+ #if OPTION_FAMILY16H_KB == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureIoCstate;
+ #undef OPTION_IO_CSTATE_FEAT
+ #define OPTION_IO_CSTATE_FEAT &CpuFeatureIoCstate,
+ extern CONST IO_CSTATE_FAMILY_SERVICES ROMDATA F16KbIoCstateSupport;
+ #undef F16_KB_IO_CSTATE_SUPPORT
+ #define F16_KB_IO_CSTATE_SUPPORT {AMD_FAMILY_16_KB, &F16KbIoCstateSupport},
+ #endif
+ #endif
+ #endif
+
+ #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA IoCstateFamilyServiceArray[] =
+{
+ F15_TN_IO_CSTATE_SUPPORT
+ F16_KB_IO_CSTATE_SUPPORT
+ {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA IoCstateFamilyServiceTable =
+{
+ (sizeof (IoCstateFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &IoCstateFamilyServiceArray[0]
+};
+
+#endif // _OPTION_IO_CSTATE_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionL3FeaturesInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionL3FeaturesInstall.h
new file mode 100644
index 0000000..8d34603
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionL3FeaturesInstall.h
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: L3 Dependent Features
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_L3_FEATURES_INSTALL_H_
+#define _OPTION_L3_FEATURES_INSTALL_H_
+
+#include "cpuL3Features.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_L3_FEAT
+#define L3_FEAT_AP_DISABLE_CACHE
+#define L3_FEAT_AP_ENABLE_CACHE
+
+#if (OPTION_HT_ASSIST == TRUE || OPTION_ATM_MODE == TRUE || OPTION_NBR_CACHE == TRUE)
+ #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_MID == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE)
+
+ #undef AGESA_ENTRY_LATE_RUN_AP_TASK
+ #define AGESA_ENTRY_LATE_RUN_AP_TASK TRUE
+ #undef L3_FEAT_AP_DISABLE_CACHE
+ #define L3_FEAT_AP_DISABLE_CACHE {AP_LATE_TASK_DISABLE_CACHE, (IMAGE_ENTRY) DisableAllCaches},
+ #undef L3_FEAT_AP_ENABLE_CACHE
+ #define L3_FEAT_AP_ENABLE_CACHE {AP_LATE_TASK_ENABLE_CACHE, (IMAGE_ENTRY) EnableAllCaches},
+ #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA L3FeatureFamilyServiceArray[] =
+{
+ {0, NULL}
+};
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA L3FeatureFamilyServiceTable =
+{
+ (sizeof (L3FeatureFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &L3FeatureFamilyServiceArray[0]
+};
+
+#endif // _OPTION_L3_FEATURES_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionLowPwrPstateInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionLowPwrPstateInstall.h
new file mode 100644
index 0000000..3834bd4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionLowPwrPstateInstall.h
@@ -0,0 +1,55 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Low Power Pstate for PROCHOT_L Throttling.
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_LOW_PWR_PSTATE_INSTALL_H_
+#define _OPTION_LOW_PWR_PSTATE_INSTALL_H_
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT_FEAT
+#define F15_OR_LOW_PWR_PSTATE_SUPPORT
+
+
+#endif // _OPTION_LOW_PWR_PSTATE_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionMemory.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionMemory.h
new file mode 100644
index 0000000..23b5109
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionMemory.h
@@ -0,0 +1,365 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Memory option API.
+ *
+ * Contains structures and values used to control the Memory option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 85859 $ @e \$Date: 2013-01-14 02:57:14 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_MEMORY_H_
+#define _OPTION_MEMORY_H_
+
+/* Memory Includes */
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "ma.h"
+#include "mp.h"
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+#define MAX_FF_TYPES 6 ///< Maximum number of DDR Form factors (UDIMMs, RDIMMMs, SODIMMS) supported
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*
+* STANDARD MEMORY FEATURE FUNCTION POINTER
+*/
+
+typedef BOOLEAN OPTION_MEM_FEATURE_NB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+typedef BOOLEAN MEM_TECH_FEAT (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+typedef UINT8 MEM_TABLE_FEAT (
+ IN OUT MEM_TABLE_ALIAS **MTPtr
+ );
+
+#define MEM_FEAT_BLOCK_NB_STRUCT_VERSION 0x01
+
+/**
+ * MEMORY FEATURE BLOCK - This structure serves as a vector table for standard
+ * memory feature implementation functions. It contains vectors for all of the
+ * features that are supported by the various Northbridge devices supported by
+ * AGESA.
+ */
+typedef struct _MEM_FEAT_BLOCK_NB {
+ UINT16 OptMemFeatVersion; ///< Version of memory feature block.
+ OPTION_MEM_FEATURE_NB *OnlineSpare; ///< Online spare support.
+ OPTION_MEM_FEATURE_NB *InterleaveBanks; ///< Bank (Chip select) interleaving support.
+ OPTION_MEM_FEATURE_NB *UndoInterleaveBanks; ///< Undo Bank (Chip Select) interleaving.
+ OPTION_MEM_FEATURE_NB *CheckInterleaveNodes; ///< Check for Node interleaving support.
+ OPTION_MEM_FEATURE_NB *InterleaveNodes; ///< Node interleaving support.
+ OPTION_MEM_FEATURE_NB *InterleaveChannels; ///< Channel interleaving support.
+ OPTION_MEM_FEATURE_NB *InterleaveRegion; ///< Interleave Region support.
+ OPTION_MEM_FEATURE_NB *CheckEcc; ///< Check for ECC support.
+ OPTION_MEM_FEATURE_NB *InitEcc; ///< ECC support.
+ OPTION_MEM_FEATURE_NB *Training; ///< Choose the type of training (Parallel, standard or hardcoded).
+ OPTION_MEM_FEATURE_NB *LvDdr3; ///< Low voltage DDR3 dimm support
+ OPTION_MEM_FEATURE_NB *OnDimmThermal; ///< On-Dimm thermal management
+ MEM_TECH_FEAT *DramInit; ///< Choose the type of Dram init (hardware based or software based).
+ OPTION_MEM_FEATURE_NB *ExcludeDIMM; ///< Exclude a dimm.
+ OPTION_MEM_FEATURE_NB *InitEarlySampleSupport; ///< Initialize early sample support.
+ OPTION_MEM_FEATURE_NB *InitCPG; ///< Continuous pattern generation.
+ OPTION_MEM_FEATURE_NB *InitHwRxEn; ///< Hardware Receiver Enable Training Initilization.
+ OPTION_MEM_FEATURE_NB *InitAMP; ///< AMP initialization.
+ OPTION_MEM_FEATURE_NB *DataEye; ///< Get 2D training data eye.
+ OPTION_MEM_FEATURE_NB *InitRdWr2DTraining; ///< Initialize Read and/or Write 2D Training Feature.
+ OPTION_MEM_FEATURE_NB *AggressorInit; ///< Aggressor initialization.
+} MEM_FEAT_BLOCK_NB;
+
+typedef AGESA_STATUS MEM_MAIN_FLOW_CONTROL (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+typedef BOOLEAN OPTION_MEM_FEATURE_MAIN (
+ IN MEM_MAIN_DATA_BLOCK *MMPtr
+ );
+
+typedef BOOLEAN MEM_NB_CONSTRUCTOR (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN MEM_FEAT_BLOCK_NB *FeatPtr,
+ IN MEM_SHARED_DATA *mmSharedPtr, ///< Pointer to Memory scratchpad
+ IN UINT8 NodeID
+ );
+
+typedef BOOLEAN MEM_TECH_CONSTRUCTOR (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+typedef VOID MEM_INITIALIZER (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+typedef AGESA_STATUS MEM_PLATFORM_CFG (
+ IN struct _MEM_DATA_STRUCT *MemData,
+ IN UINT8 SocketID,
+ IN CH_DEF_STRUCT *CurrentChannel
+ );
+
+typedef BOOLEAN MEM_IDENDIMM_CONSTRUCTOR (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN UINT8 NodeID
+ );
+
+typedef VOID MEM_TECH_TRAINING_FEAT (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Pass
+ );
+
+typedef BOOLEAN MEM_RESUME_CONSTRUCTOR (
+ IN OUT VOID *S3NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN UINT8 NodeID
+ );
+
+typedef AGESA_STATUS MEM_PLAT_SPEC_CFG (
+ IN struct _MEM_DATA_STRUCT *MemData,
+ IN OUT CH_DEF_STRUCT *CurrentChannel,
+ IN OUT MEM_PS_BLOCK *PsPtr
+ );
+
+typedef AGESA_STATUS MEM_FLOW_CFG (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemData
+ );
+
+#define MEM_FEAT_BLOCK_MAIN_STRUCT_VERSION 0x01
+
+/**
+ * MAIN FEATURE BLOCK - This structure serves as vector table for memory features
+ * that shared between all northbridge devices.
+ */
+typedef struct _MEM_FEAT_BLOCK_MAIN {
+ UINT16 OptMemFeatVersion; ///< Version of main feature block.
+ OPTION_MEM_FEATURE_MAIN *Training; ///< Training features.
+ OPTION_MEM_FEATURE_MAIN *ExcludeDIMM; ///< Exclude a dimm.
+ OPTION_MEM_FEATURE_MAIN *OnlineSpare; ///< On-line spare.
+ OPTION_MEM_FEATURE_MAIN *InterleaveNodes; ///< Node interleave.
+ OPTION_MEM_FEATURE_MAIN *InitEcc; ///< Initialize ECC on all nodes if they all support it.
+ OPTION_MEM_FEATURE_MAIN *MemClr; ///< Memory Clear.
+ OPTION_MEM_FEATURE_MAIN *MemDmi; ///< Memory DMI Support.
+ OPTION_MEM_FEATURE_MAIN *MemCrat; ///< Memory CRAT Support.
+ OPTION_MEM_FEATURE_MAIN *LvDDR3; ///< Low voltage DDR3 support.
+ OPTION_MEM_FEATURE_MAIN *UmaAllocation; ///< Uma Allocation.
+ OPTION_MEM_FEATURE_MAIN *MemSave; ///< Memory Context Save
+ OPTION_MEM_FEATURE_MAIN *MemRestore; ///< Memory Context Restore
+ OPTION_MEM_FEATURE_MAIN *MemS3Save; ///< Memory S3 Save
+ OPTION_MEM_FEATURE_MAIN *AggressorDetermination; ///< Aggressor Chipselects for all DCTs on all nodes.
+} MEM_FEAT_BLOCK_MAIN;
+
+#define MEM_NB_SUPPORT_STRUCT_VERSION 0x01
+#define MEM_TECH_FEAT_BLOCK_STRUCT_VERSION 0x01
+#define MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION 0x01
+#define MEM_TECH_LRDIMM_STRUCT_VERSION 0x01
+/**
+ * MEMORY TECHNOLOGY FEATURE BLOCK - This structure serves as a vector table for standard
+ * memory feature implementation functions. It contains vectors for all of the
+ * features that are supported by the various Technology features supported by
+ * AGESA.
+ */
+typedef struct _MEM_TECH_FEAT_BLOCK {
+ UINT16 OptMemTechFeatVersion; ///< Version of memory Tech feature block.
+ MEM_TECH_FEAT *EnterHardwareTraining; ///<Enter HW WL Training
+ MEM_TECH_FEAT *SwWLTraining; ///<SW Write Levelization training
+ MEM_TECH_FEAT *HwBasedWLTrainingPart1; ///<HW based write levelization Training Part 1
+ MEM_TECH_FEAT *HwBasedDQSReceiverEnableTrainingPart1; ///<HW based DQS receiver Enabled Training Part 1
+ MEM_TECH_FEAT *HwBasedWLTrainingPart2; ///<HW based write levelization Training Part 2
+ MEM_TECH_FEAT *HwBasedDQSReceiverEnableTrainingPart2; ///<HW based DQS receiver Enabled Training Part 2
+ MEM_TECH_FEAT *TrainExitHwTrn; ///<Exit HW WL Training
+ MEM_TECH_FEAT *NonOptimizedSWDQSRecEnTrainingPart1; ///< Non-Optimized Software based receiver Enable Training part 1
+ MEM_TECH_FEAT *OptimizedSwDqsRecEnTrainingPart1; ///< Optimized Software based receiver Enable Training part 1
+ MEM_TECH_FEAT *NonOptimizedSRdWrPosTraining; ///< Non-Optimized Rd Wr Position training
+ MEM_TECH_FEAT *OptimizedSRdWrPosTraining; ///< Optimized Rd Wr Position training
+ MEM_TECH_FEAT *MaxRdLatencyTraining; ///< MaxReadLatency Training
+ MEM_TECH_FEAT *RdPosTraining; ///< HW Rx En Seed Training
+ MEM_TECH_FEAT *RdDqs2DTraining; ///< 2D Rd DQS Training
+} MEM_TECH_FEAT_BLOCK;
+
+/**
+ * MEMORY TECHNOLOGY LRDIMM BLOCK - This structure serves as a vector table for standard
+ * memory feature implementation functions. It contains vectors for all of the
+ * features that are supported by the various LRDIMM features supported by
+ * AGESA.
+ */
+typedef struct _MEM_TECH_LRDIMM {
+ UINT16 OptMemTechLrdimmVersion; ///< Version of memory Tech feature block.
+ MEM_TECH_FEAT *MemTInitializeLrdimm; ///< LRDIMM initialization
+} MEM_TECH_LRDIMM;
+
+/**
+ * MEMORY NORTHBRIDGE SUPPORT STRUCT - This structure groups the Northbridge dependent
+ * options together in a list to provide a single access point for all code to use
+ * and to ensure that everything corresponding to the same NB type is grouped together.
+ *
+ * The Technology Block pointers are not included in this structure because DRAM technology
+ * needs to be decoupled from the northbridge type.
+ *
+ */
+typedef struct _MEM_NB_SUPPORT {
+ UINT16 MemNBSupportVersion; ///< Version of northbridge support.
+ MEM_NB_CONSTRUCTOR *MemConstructNBBlock; ///< NorthBridge block constructor.
+ MEM_INITIALIZER *MemNInitDefaults; ///< Default value initialization for MEM_DATA_STRUCT.
+ MEM_FEAT_BLOCK_NB *MemFeatBlock; ///< Memory feature block.
+ MEM_RESUME_CONSTRUCTOR *MemS3ResumeConstructNBBlock; ///< S3 memory initialization northbridge block constructor.
+ MEM_IDENDIMM_CONSTRUCTOR *MemIdentifyDimmConstruct; ///< Constructor for address to dimm identification.
+} MEM_NB_SUPPORT;
+
+/*
+ * MEMORY Non-Training FEATURES - This structure serves as a vector table for standard
+ * memory non-training feature implementation functions. It contains vectors for all of the
+ * features that are supported by the various Technology devices supported by
+ * AGESA.
+ */
+
+/**
+ * MAIN TRAINING SEQUENCE LIST - This structure serves as vector table for memory features
+ * that shared between all northbridge devices.
+ */
+typedef struct _MEM_FEAT_TRAIN_SEQ {
+ UINT16 OptMemTrainingSequenceListVersion; ///< Version of main feature block.
+ OPTION_MEM_FEATURE_NB *TrainingSequence; ///< Training Sequence function.
+ OPTION_MEM_FEATURE_NB *TrainingSequenceEnabled; ///< Enable function.
+ MEM_TECH_FEAT_BLOCK *MemTechFeatBlock; ///< Memory feature block.
+} MEM_FEAT_TRAIN_SEQ;
+
+/**
+ * PLATFORM SPECIFIC CONFIGURATION BLOCK - This structure groups various PSC table
+ * entries which are used by PSC engine
+ */
+typedef struct _MEM_PSC_TABLE_BLOCK {
+ PSC_TBL_ENTRY **TblEntryOfMaxFreq; ///< Table entry of MaxFreq.
+ PSC_TBL_ENTRY **TblEntryOfDramTerm; ///< Table entry of Dram Term.
+ PSC_TBL_ENTRY **TblEntryOfODTPattern; ///< Table entry of ODT Pattern.
+ PSC_TBL_ENTRY **TblEntryOfSAO; ///< Table entry of Slow access mode, AddrTmg and ODC..
+ PSC_TBL_ENTRY **TblEntryOfMR0WR; ///< Table entry of MR0[WR].
+ PSC_TBL_ENTRY **TblEntryOfMR0CL; ///< Table entry of MR0[CL].
+ PSC_TBL_ENTRY **TblEntryOfRC2IBT; ///< Table entry of RC2 IBT.
+ PSC_TBL_ENTRY **TblEntryOfRC10OpSpeed; ///< Table entry of RC10[operating speed].
+ PSC_TBL_ENTRY **TblEntryOfLRIBT;///< Table entry of LRDIMM IBT
+ PSC_TBL_ENTRY **TblEntryOfLRNPR; ///< Table entry of LRDIMM F0RC13[NumPhysicalRanks].
+ PSC_TBL_ENTRY **TblEntryOfLRNLR; ///< Table entry of LRDIMM F0RC13[NumLogicalRanks].
+ PSC_TBL_ENTRY **TblEntryOfGen; ///< Table entry of CLKDis map and CKE, ODT as well as ChipSel tri-state map.
+ PSC_TBL_ENTRY **TblEntryOfS2D; ///< Table entry of 2D training configs
+ PSC_TBL_ENTRY **TblEntryOfWLSeed; ///< Table entry of WL seed
+ PSC_TBL_ENTRY **TblEntryOfHWRxENSeed; ///< Table entry of HW RxEN seed
+} MEM_PSC_TABLE_BLOCK;
+
+typedef BOOLEAN MEM_PSC_FLOW (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ );
+
+/**
+ * PLATFORM SPECIFIC CONFIGURATION FLOW BLOCK - Pointers to the sub-engines of platform
+ * specific configuration.
+ */
+typedef struct _MEM_PSC_FLOW_BLOCK {
+ MEM_PSC_TABLE_BLOCK *EntryOfTables; ///<Entry of NB specific MEM_PSC_TABLE_BLOCK
+ MEM_PSC_FLOW *MaxFrequency; ///< Sub-engine which performs "Max Frequency" value extraction.
+ MEM_PSC_FLOW *DramTerm; ///< Sub-engine which performs "Dram Term" value extraction.
+ MEM_PSC_FLOW *ODTPattern; ///< Sub-engine which performs "ODT Pattern" value extraction.
+ MEM_PSC_FLOW *SAO; ///< Sub-engine which performs "Slow access mode, AddrTmg and ODC" value extraction.
+ MEM_PSC_FLOW *MR0WrCL; ///< Sub-engine which performs "MR0[WR] and MR0[CL]" value extraction.
+ MEM_PSC_FLOW *RC2IBT; ///< Sub-engine "RC2 IBT" value extraction.
+ MEM_PSC_FLOW *RC10OpSpeed; ///< Sub-engine "RC10[operating speed]" value extraction.
+ MEM_PSC_FLOW *LRIBT; ///< Sub-engine "LRDIMM IBT" value extraction.
+ MEM_PSC_FLOW *LRNPR; ///< Sub-engine "LRDIMM F0RC13[NumPhysicalRanks]" value extraction.
+ MEM_PSC_FLOW *LRNLR; ///< Sub-engine "LRDIMM F0RC13[NumLogicalRanks]" value extraction.
+ MEM_PSC_FLOW *S2D; ///< Sub-engine which performs 2D training configuration checking
+ MEM_PSC_FLOW *TrainingSeedVal; ///< Sub-engine for WL and HW RxEn pass1 seed value extraction
+} MEM_PSC_FLOW_BLOCK;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+/* Feature Default Return */
+BOOLEAN MemFDefRet (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN MemMDefRet (
+ IN MEM_MAIN_DATA_BLOCK *MMPtr
+ );
+
+BOOLEAN MemMDefRetFalse (
+ IN MEM_MAIN_DATA_BLOCK *MMPtr
+ );
+
+/* Table Feature Default Return */
+UINT8 MemFTableDefRet (
+ IN OUT MEM_TABLE_ALIAS **MTPtr
+ );
+/* S3 Feature Default Return */
+BOOLEAN MemFS3DefConstructorRet (
+ IN OUT VOID *S3NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN UINT8 NodeID
+ );
+
+BOOLEAN MemNIdentifyDimmConstructorRetDef (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN UINT8 NodeID
+ );
+
+BOOLEAN
+MemProcessConditionalOverrides (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 PsoAction,
+ IN UINT8 Dimm
+ );
+
+#endif // _OPTION_MEMORY_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionMemoryInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionMemoryInstall.h
new file mode 100644
index 0000000..07becd2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionMemoryInstall.h
@@ -0,0 +1,1629 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Memory
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 85859 $ @e \$Date: 2013-01-14 02:57:14 -0600 (Mon, 14 Jan 2013) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_MEMORY_INSTALL_H_
+#define _OPTION_MEMORY_INSTALL_H_
+
+/* Memory Includes */
+#include "OptionMemory.h"
+
+/*-------------------------------------------------------------------------------
+ * This option file is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+
+/*----------------------------------------------------------------------------------
+ * FEATURE BLOCK FUNCTIONS
+ *
+ * This section defines function names that depend upon options that are selected
+ * in the platform solution install file.
+ */
+BOOLEAN MemFDefRet (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ return FALSE;
+}
+
+BOOLEAN MemMDefRet (
+ IN MEM_MAIN_DATA_BLOCK *MMPtr
+ )
+{
+ return TRUE;
+}
+
+BOOLEAN MemMDefRetFalse (
+ IN MEM_MAIN_DATA_BLOCK *MMPtr
+ )
+{
+ return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes the northbridge block for dimm identification translator
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT
+ * @param[in,out] NodeID - ID of current node to construct
+ * @return TRUE - This is the correct constructor for the targeted node.
+ * @return FALSE - This isn't the correct constructor for the targeted node.
+ */
+BOOLEAN MemNIdentifyDimmConstructorRetDef (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN UINT8 NodeID
+ )
+{
+ return FALSE;
+}
+/*----------------------------------------------------------------------------------
+ * TABLE FEATURE BLOCK FUNCTIONS
+ *
+ * This section defines function names that depend upon options that are selected
+ * in the platform solution install file.
+ */
+UINT8 MemFTableDefRet (
+ IN OUT MEM_TABLE_ALIAS **MTPtr
+ )
+{
+ return 0;
+}
+/*----------------------------------------------------------------------------------
+ * FEATURE S3 BLOCK FUNCTIONS
+ *
+ * This section defines function names that depend upon options that are selected
+ * in the platform solution install file.
+ */
+BOOLEAN MemFS3DefConstructorRet (
+ IN OUT VOID *S3NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN UINT8 NodeID
+ )
+{
+ return TRUE;
+}
+
+#if (OPTION_MEMCTLR_TN == TRUE)
+ #if ((AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE) || ((AGESA_ENTRY_INIT_POST) && (OPTION_S3_MEM_SUPPORT == TRUE)))
+ #if (OPTION_S3_MEM_SUPPORT == TRUE)
+ extern MEM_RESUME_CONSTRUCTOR MemS3ResumeConstructNBBlockTN;
+ #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_TN MemS3ResumeConstructNBBlockTN
+ #if ((AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE))
+ extern OPTION_MEM_FEATURE_MAIN MemMS3Save;
+ #define MEM_MAIN_FEATURE_MEM_S3_SAVE MemMS3Save
+ #else
+ #define MEM_MAIN_FEATURE_MEM_S3_SAVE MemMDefRet
+ #endif
+ #else
+ #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_TN MemFS3DefConstructorRet
+ #define MEM_MAIN_FEATURE_MEM_S3_SAVE MemMDefRet
+ #endif
+ #else
+ #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_TN MemFS3DefConstructorRet
+ #define MEM_MAIN_FEATURE_MEM_S3_SAVE MemMDefRet
+ #endif
+ #if (AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE)
+ extern MEM_IDENDIMM_CONSTRUCTOR MemNIdentifyDimmConstructorTN;
+ #define MEM_IDENDIMM_TN MemNIdentifyDimmConstructorTN
+ #else
+ #define MEM_IDENDIMM_TN MemNIdentifyDimmConstructorRetDef
+ #endif
+#endif
+
+
+#if (OPTION_MEMCTLR_KB == TRUE)
+ #if ((AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE) || ((AGESA_ENTRY_INIT_POST) && (OPTION_S3_MEM_SUPPORT == TRUE)))
+ #if (OPTION_S3_MEM_SUPPORT == TRUE)
+ extern MEM_RESUME_CONSTRUCTOR MemS3ResumeConstructNBBlockKB;
+ #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_KB MemS3ResumeConstructNBBlockKB
+ #if ((AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_S3SAVE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE))
+ extern OPTION_MEM_FEATURE_MAIN MemMS3Save;
+ #define MEM_MAIN_FEATURE_MEM_S3_SAVE MemMS3Save
+ #else
+ #define MEM_MAIN_FEATURE_MEM_S3_SAVE MemMDefRet
+ #endif
+ #else
+ #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_KB MemFS3DefConstructorRet
+ #define MEM_MAIN_FEATURE_MEM_S3_SAVE MemMDefRet
+ #endif
+ #else
+ #define MEM_FEATURE_S3_RESUME_CONSTRUCTOR_KB MemFS3DefConstructorRet
+ #define MEM_MAIN_FEATURE_MEM_S3_SAVE MemMDefRet
+ #endif
+ #if (AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE)
+ extern MEM_IDENDIMM_CONSTRUCTOR MemNIdentifyDimmConstructorKB;
+ #define MEM_IDENDIMM_KB MemNIdentifyDimmConstructorKB
+ #else
+ #define MEM_IDENDIMM_KB MemNIdentifyDimmConstructorRetDef
+ #endif
+#endif
+
+
+
+/*----------------------------------------------------------------------------------
+ * NORTHBRIDGE BLOCK CONSTRUCTOR AND INITIALIZER FUNCTION DEFAULT ASSIGNMENTS
+ *
+ *----------------------------------------------------------------------------------
+*/
+#define MEM_NB_SUPPORT_TN
+#define MEM_NB_SUPPORT_KB
+#define MEM_NB_SUPPORT_END { MEM_NB_SUPPORT_STRUCT_VERSION, 0, 0, 0, 0, 0 }
+
+#if (AGESA_ENTRY_INIT_POST == TRUE)
+ /*----------------------------------------------------------------------------------
+ * FLOW CONTROL FUNCTION
+ *
+ * This section selects the function that controls the memory initialization sequence
+ * based upon the number of processor families that the BIOS will support.
+ */
+ extern MEM_FLOW_CFG MemMFlowDef;
+
+ #if (OPTION_MEMCTLR_TN == TRUE)
+ extern MEM_FLOW_CFG MemMFlowTN;
+ #define MEM_MAIN_FLOW_CONTROL_PTR_TN MemMFlowTN,
+ #else
+ #define MEM_MAIN_FLOW_CONTROL_PTR_TN MemMFlowDef,
+ #endif
+
+
+ #if (OPTION_MEMCTLR_KB == TRUE)
+ extern MEM_FLOW_CFG MemMFlowKB;
+ #define MEM_MAIN_FLOW_CONTROL_PTR_KB MemMFlowKB,
+ #else
+ extern MEM_FLOW_CFG MemMFlowDef;
+ #define MEM_MAIN_FLOW_CONTROL_PTR_KB MemMFlowDef,
+ #endif
+
+
+ MEM_FLOW_CFG* memFlowControlInstalled[] = {
+ MEM_MAIN_FLOW_CONTROL_PTR_TN
+ MEM_MAIN_FLOW_CONTROL_PTR_KB
+ NULL
+ };
+
+ #if (OPTION_ONLINE_SPARE == TRUE)
+ extern OPTION_MEM_FEATURE_MAIN MemMOnlineSpare;
+ #define MEM_MAIN_FEATURE_ONLINE_SPARE MemMOnlineSpare
+ extern OPTION_MEM_FEATURE_NB MemFOnlineSpare;
+ #define MEM_FEATURE_ONLINE_SPARE MemFOnlineSpare
+ #else
+ #define MEM_MAIN_FEATURE_ONLINE_SPARE MemMDefRet
+ #define MEM_FEATURE_ONLINE_SPARE MemFDefRet
+ #endif
+
+ #if (OPTION_MEM_RESTORE == TRUE)
+ extern OPTION_MEM_FEATURE_MAIN MemMContextSave;
+ extern OPTION_MEM_FEATURE_MAIN MemMContextRestore;
+ #define MEM_MAIN_FEATURE_MEM_SAVE MemMContextSave
+ #define MEM_MAIN_FEATURE_MEM_RESTORE MemMContextRestore
+ #else
+ #define MEM_MAIN_FEATURE_MEM_SAVE MemMDefRet
+ #define MEM_MAIN_FEATURE_MEM_RESTORE MemMDefRetFalse
+ #endif
+
+ #if (OPTION_BANK_INTERLEAVE == TRUE)
+ extern OPTION_MEM_FEATURE_NB MemFInterleaveBanks;
+ #define MEM_FEATURE_BANK_INTERLEAVE MemFInterleaveBanks
+ extern OPTION_MEM_FEATURE_NB MemFUndoInterleaveBanks;
+ #define MEM_FEATURE_UNDO_BANK_INTERLEAVE MemFUndoInterleaveBanks
+ #else
+ #define MEM_FEATURE_BANK_INTERLEAVE MemFDefRet
+ #define MEM_FEATURE_UNDO_BANK_INTERLEAVE MemFDefRet
+ #endif
+
+ #if (OPTION_NODE_INTERLEAVE == TRUE)
+ extern OPTION_MEM_FEATURE_MAIN MemMInterleaveNodes;
+ #define MEM_MAIN_FEATURE_NODE_INTERLEAVE MemMInterleaveNodes
+ extern OPTION_MEM_FEATURE_NB MemFCheckInterleaveNodes;
+ extern OPTION_MEM_FEATURE_NB MemFInterleaveNodes;
+ #define MEM_FEATURE_NODE_INTERLEAVE_CHECK MemFCheckInterleaveNodes
+ #define MEM_FEATURE_NODE_INTERLEAVE MemFInterleaveNodes
+ #else
+ #define MEM_FEATURE_NODE_INTERLEAVE_CHECK MemFDefRet
+ #define MEM_FEATURE_NODE_INTERLEAVE MemFDefRet
+ #define MEM_MAIN_FEATURE_NODE_INTERLEAVE MemMDefRet
+ #endif
+
+ #if (OPTION_DCT_INTERLEAVE == TRUE)
+ extern OPTION_MEM_FEATURE_NB MemFInterleaveChannels;
+ #define MEM_FEATURE_CHANNEL_INTERLEAVE MemFInterleaveChannels
+ #else
+ #define MEM_FEATURE_CHANNEL_INTERLEAVE MemFDefRet
+ #endif
+
+ #if (OPTION_ECC == TRUE)
+ extern OPTION_MEM_FEATURE_MAIN MemMEcc;
+ #define MEM_MAIN_FEATURE_ECC MemMEcc
+ extern OPTION_MEM_FEATURE_NB MemFCheckECC;
+ extern OPTION_MEM_FEATURE_NB MemFInitECC;
+ #define MEM_FEATURE_CK_ECC MemFCheckECC
+ #define MEM_FEATURE_ECC MemFInitECC
+ #define MEM_FEATURE_ECCX8 MemMDefRet
+ #else
+ #define MEM_MAIN_FEATURE_ECC MemMDefRet
+ #define MEM_FEATURE_CK_ECC MemFDefRet
+ #define MEM_FEATURE_ECC MemFDefRet
+ #define MEM_FEATURE_ECCX8 MemMDefRet
+ #endif
+
+ extern OPTION_MEM_FEATURE_MAIN MemMMctMemClr;
+ #define MEM_MAIN_FEATURE_MEM_CLEAR MemMMctMemClr
+
+ #if (OPTION_AGGRESSOR == TRUE)
+ extern OPTION_MEM_FEATURE_MAIN MemMAggressor;
+ #define MEM_MAIN_FEATURE_AGGRESSOR MemMAggressor
+ extern OPTION_MEM_FEATURE_NB MemFAggressorInit;
+ #define MEM_FEATURE_AGGRESSOR MemFAggressorInit
+ #else //#if (OPTION_AGGRESSOR == FALSE)
+ #define MEM_MAIN_FEATURE_AGGRESSOR MemMDefRet
+ #define MEM_FEATURE_AGGRESSOR MemFDefRet
+ #endif
+
+ #if (OPTION_DMI == TRUE)
+ #if (OPTION_DDR3 == TRUE)
+ extern OPTION_MEM_FEATURE_MAIN MemFDMISupport3;
+ #define MEM_MAIN_FEATURE_MEM_DMI MemFDMISupport3
+ #else
+ #define MEM_MAIN_FEATURE_MEM_DMI MemMDefRet
+ #endif
+ #else
+ #define MEM_MAIN_FEATURE_MEM_DMI MemMDefRet
+ #endif
+
+ #if (OPTION_CRAT == TRUE)
+ extern OPTION_MEM_FEATURE_MAIN MemFCratSupport;
+ #define MEM_MAIN_FEATURE_MEM_CRAT MemFCratSupport
+ #else
+ #define MEM_MAIN_FEATURE_MEM_CRAT MemMDefRet
+ #endif
+
+ #if (OPTION_DDR3 == TRUE)
+ extern OPTION_MEM_FEATURE_NB MemFOnDimmThermal;
+ extern OPTION_MEM_FEATURE_MAIN MemMLvDdr3;
+ extern OPTION_MEM_FEATURE_NB MemFLvDdr3;
+ #define MEM_FEATURE_ONDIMMTHERMAL MemFOnDimmThermal
+ #define MEM_MAIN_FEATURE_LVDDR3 MemMLvDdr3
+ #define MEM_FEATURE_LVDDR3 MemFLvDdr3
+ #else
+ #define MEM_FEATURE_ONDIMMTHERMAL MemFDefRet
+ #define MEM_MAIN_FEATURE_LVDDR3 MemMDefRet
+ #define MEM_FEATURE_LVDDR3 MemFDefRet
+ #endif
+
+ extern OPTION_MEM_FEATURE_NB MemFInterleaveRegion;
+ #define MEM_FEATURE_REGION_INTERLEAVE MemFInterleaveRegion
+
+ extern OPTION_MEM_FEATURE_MAIN MemMUmaAlloc;
+ #define MEM_MAIN_FEATURE_UMAALLOC MemMUmaAlloc
+
+ #if (OPTION_PARALLEL_TRAINING == TRUE)
+ extern OPTION_MEM_FEATURE_MAIN MemMParallelTraining;
+ #define MEM_MAIN_FEATURE_TRAINING MemMParallelTraining
+ #else
+ #ifndef EXTERN_MEMMSTANDARDTRAINING
+ #define EXTERN_MEMMSTANDARDTRAINING
+ extern OPTION_MEM_FEATURE_MAIN MemMStandardTraining;
+ #endif
+ #define MEM_MAIN_FEATURE_TRAINING MemMStandardTraining
+ #endif
+
+ #if (OPTION_DIMM_EXCLUDE == TRUE)
+ extern OPTION_MEM_FEATURE_MAIN MemMRASExcludeDIMM;
+ #define MEM_MAIN_FEATURE_DIMM_EXCLUDE MemMRASExcludeDIMM
+ extern OPTION_MEM_FEATURE_NB MemFRASExcludeDIMM;
+ #define MEM_FEATURE_DIMM_EXCLUDE MemFRASExcludeDIMM
+ #else
+ #define MEM_FEATURE_DIMM_EXCLUDE MemFDefRet
+ #define MEM_MAIN_FEATURE_DIMM_EXCLUDE MemMDefRet
+ #endif
+
+ #if (OPTION_AMP == TRUE)
+ extern OPTION_MEM_FEATURE_NB MemFAMP;
+ #define MEM_FEATURE_AMP MemFAMP
+ #else
+ #define MEM_FEATURE_AMP MemFDefRet
+ #endif
+
+ #if (OPTION_DATA_EYE == TRUE)
+ extern OPTION_MEM_FEATURE_NB MemF2DDataEyeInit;
+ #define MEM_FEATURE_DATA_EYE MemF2DDataEyeInit
+ #else //#if (OPTION_DATA_EYE == FALSE)
+ #define MEM_FEATURE_DATA_EYE MemFDefRet
+ #endif
+
+ /*----------------------------------------------------------------------------------
+ * TECHNOLOGY BLOCK CONSTRUCTOR FUNCTION ASSIGNMENTS
+ *
+ *----------------------------------------------------------------------------------
+ */
+ #if OPTION_DDR2 == TRUE
+ extern MEM_TECH_CONSTRUCTOR MemConstructTechBlock2;
+ #define MEM_TECH_CONSTRUCTOR_DDR2 MemConstructTechBlock2,
+ #if (OPTION_HW_DRAM_INIT == TRUE)
+ extern MEM_TECH_FEAT MemTDramInitHw;
+ #define MEM_TECH_FEATURE_HW_DRAMINIT MemTDramInitHw
+ #else
+ #define MEM_TECH_FEATURE_HW_DRAMINIT MemTFeatDef
+ #endif
+ #if (OPTION_SW_DRAM_INIT == TRUE)
+ #define MEM_TECH_FEATURE_SW_DRAMINIT MemTFeatDef
+ #else
+ #define MEM_TECH_FEATURE_SW_DRAMINIT MemTFeatDef
+#endif
+ #else
+ #define MEM_TECH_CONSTRUCTOR_DDR2
+ #endif
+ #if OPTION_DDR3 == TRUE
+ extern MEM_TECH_CONSTRUCTOR MemConstructTechBlock3;
+ #define MEM_TECH_CONSTRUCTOR_DDR3 MemConstructTechBlock3,
+ #if (OPTION_HW_DRAM_INIT == TRUE)
+ extern MEM_TECH_FEAT MemTDramInitHw;
+ #define MEM_TECH_FEATURE_HW_DRAMINIT MemTDramInitHw
+ #else
+ #define MEM_TECH_FEATURE_HW_DRAMINIT MemTFeatDef
+ #endif
+ #if (OPTION_SW_DRAM_INIT == TRUE)
+ #define MEM_TECH_FEATURE_SW_DRAMINIT MemTDramInitSw3
+ #else
+ #define MEM_TECH_FEATURE_SW_DRAMINIT MemTFeatDef
+ #endif
+ #else
+ #define MEM_TECH_CONSTRUCTOR_DDR3
+ #endif
+
+ /*---------------------------------------------------------------------------------------------------
+ * FEATURE BLOCKS
+ *
+ * This section instantiates a feature block structure for each memory controller installed
+ * by the platform solution install file.
+ *---------------------------------------------------------------------------------------------------
+ */
+
+
+ /*---------------------------------------------------------------------------------------------------
+ * TRINITY FEATURE BLOCK
+ *---------------------------------------------------------------------------------------------------
+ */
+ #if (OPTION_MEMCTLR_TN == TRUE)
+ #if OPTION_DDR2
+ #undef MEM_TECH_FEATURE_DRAMINIT
+ #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_HW_DRAMINIT
+ #endif
+ #if OPTION_DDR3
+ #undef MEM_MAIN_FEATURE_LVDDR3
+ extern OPTION_MEM_FEATURE_MAIN MemMLvDdr3PerformanceEnhPre;
+ #define MEM_MAIN_FEATURE_LVDDR3 MemMLvDdr3PerformanceEnhPre
+ #undef MEM_TECH_FEATURE_DRAMINIT
+ #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_SW_DRAMINIT
+ #endif
+
+ #if (OPTION_EARLY_SAMPLES == TRUE)
+ extern OPTION_MEM_FEATURE_NB MemNInitEarlySampleSupportTN;
+ #define MEM_EARLY_SAMPLE_SUPPORT MemNInitEarlySampleSupportTN
+ #else
+ #define MEM_EARLY_SAMPLE_SUPPORT MemFDefRet
+ #endif
+
+ #if (OPTION_CONTINOUS_PATTERN_GENERATION == TRUE)
+ extern OPTION_MEM_FEATURE_NB MemNInitCPGUnb;
+ #undef MEM_TECH_FEATURE_CPG
+ #define MEM_TECH_FEATURE_CPG MemNInitCPGUnb
+ #else
+ #undef MEM_TECH_FEATURE_CPG
+ #define MEM_TECH_FEATURE_CPG MemFDefRet
+ #endif
+
+ #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+ #undef MEM_TECH_FEATURE_HWRXEN
+ #define MEM_TECH_FEATURE_HWRXEN MemNInitDqsTrainRcvrEnHwNb
+ #else
+ extern OPTION_MEM_FEATURE_NB MemNDisableDqsTrainRcvrEnHwNb;
+ #undef MEM_TECH_FEATURE_HWRXEN
+ #define MEM_TECH_FEATURE_HWRXEN MemNDisableDqsTrainRcvrEnHwNb
+ #endif
+
+
+ #undef MEM_MAIN_FEATURE_TRAINING
+ #undef MEM_FEATURE_TRAINING
+ #if (OPTION_RDDQS_2D_TRAINING == TRUE)
+ extern OPTION_MEM_FEATURE_MAIN MemMStandardTrainingUsingAdjacentDies;
+ #define MEM_MAIN_FEATURE_TRAINING MemMStandardTrainingUsingAdjacentDies
+ #else
+ extern OPTION_MEM_FEATURE_MAIN MemMStandardTraining;
+ #define MEM_MAIN_FEATURE_TRAINING MemMStandardTraining
+ #endif
+ #define MEM_FEATURE_TRAINING MemFStandardTraining
+
+ MEM_FEAT_BLOCK_NB MemFeatBlockTN = {
+ MEM_FEAT_BLOCK_NB_STRUCT_VERSION,
+ MEM_FEATURE_ONLINE_SPARE,
+ MEM_FEATURE_BANK_INTERLEAVE,
+ MEM_FEATURE_UNDO_BANK_INTERLEAVE,
+ MemFDefRet,
+ MemFDefRet,
+ MEM_FEATURE_CHANNEL_INTERLEAVE,
+ MEM_FEATURE_REGION_INTERLEAVE,
+ MEM_FEATURE_CK_ECC,
+ MEM_FEATURE_ECC,
+ MEM_FEATURE_TRAINING,
+ MEM_FEATURE_LVDDR3,
+ MEM_FEATURE_ONDIMMTHERMAL,
+ MEM_TECH_FEATURE_DRAMINIT,
+ MEM_FEATURE_DIMM_EXCLUDE,
+ MEM_EARLY_SAMPLE_SUPPORT,
+ MEM_TECH_FEATURE_CPG,
+ MEM_TECH_FEATURE_HWRXEN,
+ MEM_FEATURE_AMP,
+ MemFDefRet,
+ MemFDefRet,
+ MemFDefRet
+ };
+
+ #undef MEM_NB_SUPPORT_TN
+ extern MEM_NB_CONSTRUCTOR MemConstructNBBlockTN;
+ extern MEM_INITIALIZER MemNInitDefaultsTN;
+ #define MEM_NB_SUPPORT_TN { MEM_NB_SUPPORT_STRUCT_VERSION, MemConstructNBBlockTN, MemNInitDefaultsTN, &MemFeatBlockTN, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_TN, MEM_IDENDIMM_TN },
+ #endif // OPTION_MEMCTRL_TN
+
+
+ /*---------------------------------------------------------------------------------------------------
+ * KABINI FEATURE BLOCK
+ *---------------------------------------------------------------------------------------------------
+ */
+ #if (OPTION_MEMCTLR_KB == TRUE)
+ #if OPTION_DDR2
+ #undef MEM_TECH_FEATURE_DRAMINIT
+ #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_HW_DRAMINIT
+ #endif
+ #if OPTION_DDR3
+ #undef MEM_MAIN_FEATURE_LVDDR3
+ extern OPTION_MEM_FEATURE_MAIN MemMLvDdr3PerformanceEnhPre;
+ #define MEM_MAIN_FEATURE_LVDDR3 MemMLvDdr3PerformanceEnhPre
+ #undef MEM_TECH_FEATURE_DRAMINIT
+ #define MEM_TECH_FEATURE_DRAMINIT MEM_TECH_FEATURE_SW_DRAMINIT
+ #endif
+
+ #if (OPTION_EARLY_SAMPLES == TRUE)
+ extern OPTION_MEM_FEATURE_NB MemNInitEarlySampleSupportKB;
+ #define MEM_EARLY_SAMPLE_SUPPORT MemNInitEarlySampleSupportKB
+ #else
+ #define MEM_EARLY_SAMPLE_SUPPORT MemFDefRet
+ #endif
+
+ #if (OPTION_CONTINOUS_PATTERN_GENERATION == TRUE)
+ extern OPTION_MEM_FEATURE_NB MemNInitCPGUnb;
+ #undef MEM_TECH_FEATURE_CPG
+ #define MEM_TECH_FEATURE_CPG MemNInitCPGUnb
+ #else
+ #undef MEM_TECH_FEATURE_CPG
+ #define MEM_TECH_FEATURE_CPG MemFDefRet
+ #endif
+
+ #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+ extern OPTION_MEM_FEATURE_NB MemNInitDqsTrainRcvrEnHwNb;
+ #undef MEM_TECH_FEATURE_HWRXEN
+ #define MEM_TECH_FEATURE_HWRXEN MemNInitDqsTrainRcvrEnHwNb
+ #else
+ extern OPTION_MEM_FEATURE_NB MemNDisableDqsTrainRcvrEnHwNb;
+ #undef MEM_TECH_FEATURE_HWRXEN
+ #define MEM_TECH_FEATURE_HWRXEN MemNDisableDqsTrainRcvrEnHwNb
+ #endif
+
+
+ #undef MEM_MAIN_FEATURE_TRAINING
+ #undef MEM_FEATURE_TRAINING
+ #if (OPTION_RDDQS_2D_TRAINING == TRUE)
+ extern OPTION_MEM_FEATURE_MAIN MemMStandardTrainingUsingAdjacentDies;
+ #define MEM_MAIN_FEATURE_TRAINING MemMStandardTrainingUsingAdjacentDies
+ extern OPTION_MEM_FEATURE_NB MemFRdWr2DTrainingInitKB;
+ #define MEM_FEATURE_RDWR_2D_TRAINING MemFRdWr2DTrainingInitKB
+ #else
+ #ifndef EXTERN_MEMMSTANDARDTRAINING
+ #define EXTERN_MEMMSTANDARDTRAINING
+ extern OPTION_MEM_FEATURE_MAIN MemMStandardTraining;
+ #endif
+ #define MEM_MAIN_FEATURE_TRAINING MemMStandardTraining
+ #define MEM_FEATURE_RDWR_2D_TRAINING MemFDefRet
+ #endif
+ extern OPTION_MEM_FEATURE_NB MemFStandardTraining;
+ #define MEM_FEATURE_TRAINING MemFStandardTraining
+
+ MEM_FEAT_BLOCK_NB MemFeatBlockKB = {
+ MEM_FEAT_BLOCK_NB_STRUCT_VERSION,
+ MEM_FEATURE_ONLINE_SPARE,
+ MEM_FEATURE_BANK_INTERLEAVE,
+ MEM_FEATURE_UNDO_BANK_INTERLEAVE,
+ MemFDefRet,
+ MemFDefRet,
+ MemFDefRet,
+ MemFDefRet,
+ MEM_FEATURE_CK_ECC,
+ MEM_FEATURE_ECC,
+ MEM_FEATURE_TRAINING,
+ MEM_FEATURE_LVDDR3,
+ MEM_FEATURE_ONDIMMTHERMAL,
+ MEM_TECH_FEATURE_DRAMINIT,
+ MEM_FEATURE_DIMM_EXCLUDE,
+ MEM_EARLY_SAMPLE_SUPPORT,
+ MEM_TECH_FEATURE_CPG,
+ MEM_TECH_FEATURE_HWRXEN,
+ MemFDefRet,
+ MemFDefRet,
+ MEM_FEATURE_RDWR_2D_TRAINING,
+ MemFDefRet
+ };
+
+ #undef MEM_NB_SUPPORT_KB
+ extern MEM_NB_CONSTRUCTOR MemConstructNBBlockKB;
+ extern MEM_INITIALIZER MemNInitDefaultsKB;
+ #define MEM_NB_SUPPORT_KB { MEM_NB_SUPPORT_STRUCT_VERSION, MemConstructNBBlockKB, MemNInitDefaultsKB, &MemFeatBlockKB, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_KB, MEM_IDENDIMM_KB },
+ #endif // OPTION_MEMCTRL_KB
+
+
+ /*---------------------------------------------------------------------------------------------------
+ * MAIN FEATURE BLOCK
+ *---------------------------------------------------------------------------------------------------
+ */
+ MEM_FEAT_BLOCK_MAIN MemFeatMain = {
+ MEM_FEAT_BLOCK_MAIN_STRUCT_VERSION,
+ MEM_MAIN_FEATURE_TRAINING,
+ MEM_MAIN_FEATURE_DIMM_EXCLUDE,
+ MEM_MAIN_FEATURE_ONLINE_SPARE,
+ MEM_MAIN_FEATURE_NODE_INTERLEAVE,
+ MEM_MAIN_FEATURE_ECC,
+ MEM_MAIN_FEATURE_MEM_CLEAR,
+ MEM_MAIN_FEATURE_MEM_DMI,
+ MEM_MAIN_FEATURE_MEM_CRAT,
+ MEM_MAIN_FEATURE_LVDDR3,
+ MEM_MAIN_FEATURE_UMAALLOC,
+ MEM_MAIN_FEATURE_MEM_SAVE,
+ MEM_MAIN_FEATURE_MEM_RESTORE,
+ MEM_MAIN_FEATURE_MEM_S3_SAVE,
+ MEM_MAIN_FEATURE_AGGRESSOR
+ };
+
+
+ /*---------------------------------------------------------------------------------------------------
+ * Technology Training SPECIFIC CONFIGURATION
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ #define MEM_TECH_TRAINING_FEAT_NULL_TERNMIATOR 0
+
+ #if OPTION_MEMCTLR_TN
+ extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceTN;
+ #define TECH_TRAIN_ENTER_HW_TRN_DDR2 MemTFeatDef
+ #define TECH_TRAIN_EXIT_HW_TRN_DDR2 MemTFeatDef
+ #define TECH_TRAIN_HW_WL_P1_DDR2 MemTFeatDef
+ #define TECH_TRAIN_HW_WL_P2_DDR2 MemTFeatDef
+ #define TECH_TRAIN_SW_WL_DDR2 MemTFeatDef
+ #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+ #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2 MemTFeatDef
+ #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+ #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+ #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+ #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+ #define TECH_TRAIN_MAX_RD_LAT_DDR2 MemTFeatDef
+ #define NB_TRAIN_FLOW_DDR2 (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+ #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_TN { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+ #if OPTION_DDR3
+ #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+ #define TECH_TRAIN_ENTER_HW_TRN_DDR3 MemTPreparePhyAssistedTraining
+ #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+ #define TECH_TRAIN_EXIT_HW_TRN_DDR3 MemTExitPhyAssistedTraining
+ #if (OPTION_HW_WRITE_LEV_TRAINING == TRUE)
+ #define TECH_TRAIN_HW_WL_P1_DDR3 MemTWriteLevelizationHw3Pass1
+ #define TECH_TRAIN_HW_WL_P2_DDR3 MemTWriteLevelizationHw3Pass2
+ #else
+ #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+ #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+ #endif
+ #if (OPTION_SW_WRITE_LEV_TRAINING == TRUE)
+ #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+ #else
+ #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+ #endif
+ #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+ #ifdef TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3
+ #undef TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3
+ #endif
+ #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTDqsTrainRcvrEnHwPass1
+ #ifdef TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3
+ #undef TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3
+ #endif
+ #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTDqsTrainRcvrEnHwPass2
+ #if (OPTION_HW_DQS_REC_EN_SEED_TRAINING == TRUE)
+ #undef TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3
+ extern MEM_TECH_FEAT MemNRdPosTrnTN;
+ #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemNRdPosTrnTN
+ #else
+ #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+ #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTTrainDQSEdgeDetect
+ #else
+ #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+ #endif
+ #endif
+ #else
+ #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+ #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+ #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTTrainDQSEdgeDetect
+ #else
+ #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+ #endif
+ #endif
+ #if (OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+ #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #else
+ #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #endif
+ #undef TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3
+ #if (OPTION_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+ #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #else
+ #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #endif
+ #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+ #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTTrainDQSEdgeDetectSw
+ #else
+ #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+ #endif
+ #undef TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3
+ #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+ #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTTrainDQSEdgeDetectSw
+ #else
+ #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+ #endif
+ #if (OPTION_MAX_RD_LAT_TRAINING == TRUE)
+ #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTTrainMaxLatency
+ #else
+ #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+ #endif
+ #if (OPTION_RDDQS_2D_TRAINING == TRUE)
+ #undef TECH_TRAIN_DQS_2D_DDR3
+ #define TECH_TRAIN_DQS_2D_DDR3 MemTAmdRdDqs2DTraining
+ #else
+ #undef TECH_TRAIN_DQS_2D_DDR3
+ #define TECH_TRAIN_DQS_2D_DDR3 MemTFeatDef
+ #endif
+ MEM_TECH_FEAT_BLOCK memTechTrainingFeatSequenceDDR3TN = {
+ MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+ TECH_TRAIN_ENTER_HW_TRN_DDR3,
+ TECH_TRAIN_SW_WL_DDR3,
+ TECH_TRAIN_HW_WL_P1_DDR3,
+ TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3,
+ TECH_TRAIN_HW_WL_P2_DDR3,
+ TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3,
+ TECH_TRAIN_EXIT_HW_TRN_DDR3,
+ TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3,
+ TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3,
+ TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3,
+ TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3,
+ TECH_TRAIN_MAX_RD_LAT_DDR3,
+ TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3,
+ TECH_TRAIN_DQS_2D_DDR3
+ };
+ #define NB_TRAIN_FLOW_DDR3 MemNDQSTiming3Nb
+ #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_TN {MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION,memNSequenceDDR3Nb, memNEnableTrainSequenceTN, &memTechTrainingFeatSequenceDDR3TN },
+ #else
+ #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+ #define TECH_TRAIN_ENTER_HW_TRN_DDR3 MemTFeatDef
+ #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+ #define TECH_TRAIN_EXIT_HW_TRN_DDR3 MemTFeatDef
+ #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+ #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+ #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+ #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+ #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+ #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+ #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+ #define NB_TRAIN_FLOW_DDR3 (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+ #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_TN { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+ #endif
+ #else
+ #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_TN { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+ #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_TN { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+ #endif
+
+
+ #if OPTION_MEMCTLR_KB
+ extern OPTION_MEM_FEATURE_NB memNEnableTrainSequenceKB;
+ #define TECH_TRAIN_ENTER_HW_TRN_DDR2 MemTFeatDef
+ #define TECH_TRAIN_EXIT_HW_TRN_DDR2 MemTFeatDef
+ #define TECH_TRAIN_HW_WL_P1_DDR2 MemTFeatDef
+ #define TECH_TRAIN_HW_WL_P2_DDR2 MemTFeatDef
+ #define TECH_TRAIN_SW_WL_DDR2 MemTFeatDef
+ #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+ #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR2 MemTFeatDef
+ #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+ #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR2 MemTFeatDef
+ #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+ #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR2 MemTFeatDef
+ #define TECH_TRAIN_MAX_RD_LAT_DDR2 MemTFeatDef
+ #define NB_TRAIN_FLOW_DDR2 (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+ #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_KB { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+ #if OPTION_DDR3
+ #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+ #define TECH_TRAIN_ENTER_HW_TRN_DDR3 MemTPreparePhyAssistedTraining
+ #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+ #define TECH_TRAIN_EXIT_HW_TRN_DDR3 MemTExitPhyAssistedTraining
+ #if (OPTION_HW_WRITE_LEV_TRAINING == TRUE)
+ #define TECH_TRAIN_HW_WL_P1_DDR3 MemTWriteLevelizationHw3Pass1
+ #define TECH_TRAIN_HW_WL_P2_DDR3 MemTWriteLevelizationHw3Pass2
+ #else
+ #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+ #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+ #endif
+ #if (OPTION_SW_WRITE_LEV_TRAINING == TRUE)
+ #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+ #else
+ #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+ #endif
+ #if (OPTION_HW_DQS_REC_EN_TRAINING == TRUE)
+ #ifdef TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3
+ #undef TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3
+ #endif
+ #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTDqsTrainRcvrEnHwPass1
+ #ifdef TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3
+ #undef TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3
+ #endif
+ #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTDqsTrainRcvrEnHwPass2
+ #if (OPTION_HW_DQS_REC_EN_SEED_TRAINING == TRUE)
+ #undef TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3
+ extern MEM_TECH_FEAT MemNRdPosTrnKB;
+ #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemNRdPosTrnKB
+ #else
+ #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+ #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTTrainDQSEdgeDetect
+ #else
+ #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+ #endif
+ #endif
+ #else
+ #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+ #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE || OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+ #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTTrainDQSEdgeDetect
+ #else
+ #define TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3 MemTFeatDef
+ #endif
+ #endif
+ #if (OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+ #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #else
+ #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #endif
+ #undef TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3
+ #if (OPTION_OPT_SW_DQS_REC_EN_TRAINING == TRUE)
+ #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #else
+ #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #endif
+ #if (OPTION_NON_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+ #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTTrainDQSEdgeDetectSw
+ #else
+ #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+ #endif
+ #undef TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3
+ #if (OPTION_OPT_SW_RD_WR_POS_TRAINING == TRUE)
+ #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTTrainDQSEdgeDetectSw
+ #else
+ #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+ #endif
+ #if (OPTION_MAX_RD_LAT_TRAINING == TRUE)
+ #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTTrainMaxLatency
+ #else
+ #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+ #endif
+ #if (OPTION_RDDQS_2D_TRAINING == TRUE)
+ extern MEM_TECH_FEAT MemFAmdRdDqs2DTraining;
+ #undef TECH_TRAIN_DQS_2D_DDR3
+ #define TECH_TRAIN_DQS_2D_DDR3 MemFAmdRdDqs2DTraining
+ #else
+ #undef TECH_TRAIN_DQS_2D_DDR3
+ #define TECH_TRAIN_DQS_2D_DDR3 MemTFeatDef
+ #endif
+ MEM_TECH_FEAT_BLOCK memTechTrainingFeatSequenceDDR3KB = {
+ MEM_TECH_FEAT_BLOCK_STRUCT_VERSION,
+ TECH_TRAIN_ENTER_HW_TRN_DDR3,
+ TECH_TRAIN_SW_WL_DDR3,
+ TECH_TRAIN_HW_WL_P1_DDR3,
+ TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3,
+ TECH_TRAIN_HW_WL_P2_DDR3,
+ TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3,
+ TECH_TRAIN_EXIT_HW_TRN_DDR3,
+ TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3,
+ TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3,
+ TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3,
+ TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3,
+ TECH_TRAIN_MAX_RD_LAT_DDR3,
+ TECH_TRAIN_HW_DQS_REC_EN_SEED_DDR3,
+ TECH_TRAIN_DQS_2D_DDR3
+ };
+ #define NB_TRAIN_FLOW_DDR3 MemNDQSTiming3Nb
+ #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_KB {MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION,memNSequenceDDR3Nb, memNEnableTrainSequenceKB, &memTechTrainingFeatSequenceDDR3KB },
+ #else
+ #undef TECH_TRAIN_ENTER_HW_TRN_DDR3
+ #define TECH_TRAIN_ENTER_HW_TRN_DDR3 MemTFeatDef
+ #undef TECH_TRAIN_EXIT_HW_TRN_DDR3
+ #define TECH_TRAIN_EXIT_HW_TRN_DDR3 MemTFeatDef
+ #define TECH_TRAIN_HW_WL_P1_DDR3 MemTFeatDef
+ #define TECH_TRAIN_HW_WL_P2_DDR3 MemTFeatDef
+ #define TECH_TRAIN_SW_WL_DDR3 MemTFeatDef
+ #define TECH_TRAIN_HW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #define TECH_TRAIN_HW_DQS_REC_EN_P2_DDR3 MemTFeatDef
+ #define TECH_TRAIN_NON_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #define TECH_TRAIN_OPT_SW_DQS_REC_EN_P1_DDR3 MemTFeatDef
+ #define TECH_TRAIN_NON_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+ #define TECH_TRAIN_OPT_SW_RD_WR_POS_DDR3 MemTFeatDef
+ #define TECH_TRAIN_MAX_RD_LAT_DDR3 MemTFeatDef
+ #define NB_TRAIN_FLOW_DDR3 (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue
+ #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_KB { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+ #endif
+ #else
+ #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_KB { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+ #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_KB { MEM_TECH_TRAIN_SEQUENCE_STRUCT_VERSION, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefTrue, (BOOLEAN (*) (MEM_NB_BLOCK*)) memDefFalse, 0 },
+ #endif
+
+
+
+ #define MEM_TECH_ENABLE_TRAINING_SEQUENCE_END { MEM_NB_SUPPORT_STRUCT_VERSION, 0, 0, 0 }
+ MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR2[] = {
+ MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_TN
+ MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR2_KB
+ MEM_TECH_ENABLE_TRAINING_SEQUENCE_END
+ };
+
+ MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR3[] = {
+ MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_TN
+ MEM_TECH_ENABLE_TRAINING_SEQUENCE_DDR3_KB
+ MEM_TECH_ENABLE_TRAINING_SEQUENCE_END
+ };
+ /*---------------------------------------------------------------------------------------------------
+ * NB TRAINING FLOW CONTROL
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ OPTION_MEM_FEATURE_NB* memNTrainFlowControl[] = { // Training flow control
+ NB_TRAIN_FLOW_DDR2,
+ NB_TRAIN_FLOW_DDR3,
+ };
+ /*---------------------------------------------------------------------------------------------------
+ * TECHNOLOGY BLOCK
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ MEM_TECH_CONSTRUCTOR* memTechInstalled[] = { // Types of technology installed
+ MEM_TECH_CONSTRUCTOR_DDR2
+ MEM_TECH_CONSTRUCTOR_DDR3
+ NULL
+ };
+ /*---------------------------------------------------------------------------------------------------
+ * PLATFORM SPECIFIC BLOCK FORM FACTOR DEFINITION
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+
+ /*---------------------------------------------------------------------------------------------------
+ * PLATFORM-SPECIFIC CONFIGURATION
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+
+ /*----------------------------------------------------------------------
+ * DEFAULT PSCFG DEFINITIONS
+ *
+ *----------------------------------------------------------------------
+ */
+
+ MEM_PLATFORM_CFG* memPlatformTypeInstalled[] = {
+ NULL
+ };
+ CONST UINTN SIZE_OF_PLATFORM = (sizeof (memPlatformTypeInstalled) / sizeof (MEM_PLATFORM_CFG*));
+
+ /*---------------------------------------------------------------------------------------------------
+ * EXTRACTABLE PLATFORM SPECIFIC CONFIGURATION
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ #define MEM_PSC_FLOW_BLOCK_END NULL
+ #define PSC_TBL_END NULL
+ #define MEM_PSC_FLOW_DEFTRUE (BOOLEAN (*) (MEM_NB_BLOCK*, MEM_PSC_TABLE_BLOCK *)) memDefTrue
+
+ #define PSC_TBL_TN_UDIMM3_S2D_FM2
+ #define PSC_TBL_TN_SODIMM3_S2D_FS1
+ #define PSC_TBL_TN_SODIMM3_S2D_FP2
+ #define PSC_TBL_TN_SODIMM3_S2D_FM2
+ #if OPTION_MEMCTLR_TN
+ #if OPTION_FS1_SOCKET_SUPPORT
+ extern PSC_TBL_ENTRY TNClkDisMapEntSOFS1;
+ #define PSC_TBL_TN_CLK_DIS_FS1 &TNClkDisMapEntSOFS1,
+ extern PSC_TBL_ENTRY TNSODdr3ODTTriEntFS1;
+ #define PSC_TBL_TN_ODT_TRI_FS1 &TNSODdr3ODTTriEntFS1,
+ extern PSC_TBL_ENTRY TNSODdr3CSTriEntFS1;
+ #define PSC_TBL_TN_CS_TRI_FS1 &TNSODdr3CSTriEntFS1,
+ #endif
+ #if (OPTION_FM2_SOCKET_SUPPORT || OPTION_FM2r2_SOCKET_SUPPORT)
+ extern PSC_TBL_ENTRY TNClkDisMapEntUFM2;
+ #define PSC_TBL_TN_CLK_DIS_FM2 &TNClkDisMapEntUFM2,
+ extern PSC_TBL_ENTRY TNUDdr3ODTTriEntFM2;
+ #define PSC_TBL_TN_ODT_TRI_FM2 &TNUDdr3ODTTriEntFM2,
+ extern PSC_TBL_ENTRY TNUDdr3CSTriEntFM2;
+ #define PSC_TBL_TN_CS_TRI_FM2 &TNUDdr3CSTriEntFM2,
+ #endif
+ #if OPTION_FP2_SOCKET_SUPPORT
+ extern PSC_TBL_ENTRY TNClkDisMapEntSOFP2;
+ #define PSC_TBL_TN_CLK_DIS_FP2 &TNClkDisMapEntSOFP2,
+ extern PSC_TBL_ENTRY TNSODdr3ODTTriEntFP2;
+ #define PSC_TBL_TN_ODT_TRI_FP2 &TNSODdr3ODTTriEntFP2,
+ extern PSC_TBL_ENTRY TNSODdr3CSTriEntFP2;
+ #define PSC_TBL_TN_CS_TRI_FP2 &TNSODdr3CSTriEntFP2,
+ #endif
+ #if OPTION_UDIMMS
+ extern PSC_TBL_ENTRY TNMaxFreqTblEntU;
+ #define PSC_TBL_TN_UDIMM3_MAX_FREQ &TNMaxFreqTblEntU,
+ extern PSC_TBL_ENTRY RLMaxFreqTblEntU;
+ #define PSC_TBL_RL_UDIMM3_MAX_FREQ &RLMaxFreqTblEntU,
+ extern PSC_TBL_ENTRY TNDramTermTblEntU;
+ #define PSC_TBL_TN_UDIMM3_DRAM_TERM &TNDramTermTblEntU,
+ extern PSC_TBL_ENTRY TNSAOTblEntU3;
+ #define PSC_TBL_TN_UDIMM3_SAO &TNSAOTblEntU3,
+ #if (OPTION_FM2_SOCKET_SUPPORT || OPTION_FM2r2_SOCKET_SUPPORT)
+ extern PSC_TBL_ENTRY TNMaxFreqTblEntUFM2;
+ #define PSC_TBL_TN_UDIMM3_MAX_FREQ_FM2 &TNMaxFreqTblEntUFM2,
+ extern PSC_TBL_ENTRY RLMaxFreqTblEntUFM2;
+ #define PSC_TBL_RL_UDIMM3_MAX_FREQ_FM2 &RLMaxFreqTblEntUFM2,
+ #undef PSC_TBL_TN_UDIMM3_S2D_FM2
+ extern PSC_TBL_ENTRY S2DTblEntUFM2;
+ #define PSC_TBL_TN_UDIMM3_S2D_FM2 &S2DTblEntUFM2,
+ #endif
+ #endif
+ #if OPTION_SODIMMS
+ extern PSC_TBL_ENTRY TNSAOTblEntSO3;
+ #define PSC_TBL_TN_SODIMM3_SAO &TNSAOTblEntSO3,
+ extern PSC_TBL_ENTRY TNDramTermTblEntSO;
+ #define PSC_TBL_TN_SODIMM3_DRAM_TERM &TNDramTermTblEntSO,
+ #if OPTION_FS1_SOCKET_SUPPORT
+ extern PSC_TBL_ENTRY TNMaxFreqTblEntSOFS1;
+ #define PSC_TBL_TN_SODIMM3_MAX_FREQ_FS1 &TNMaxFreqTblEntSOFS1,
+ #undef PSC_TBL_TN_SODIMM3_S2D_FS1
+ #define PSC_TBL_TN_SODIMM3_S2D_FS1
+ #endif
+ #if (OPTION_FM2_SOCKET_SUPPORT || OPTION_FM2r2_SOCKET_SUPPORT)
+ extern PSC_TBL_ENTRY TNMaxFreqTblEntSO;
+ #define PSC_TBL_TN_SODIMM3_MAX_FREQ &TNMaxFreqTblEntSO,
+ #undef PSC_TBL_TN_SODIMM3_S2D_FM2
+ extern PSC_TBL_ENTRY S2DTblEntUFM2;
+ #define PSC_TBL_TN_SODIMM3_S2D_FM2 &S2DTblEntUFM2,
+ #endif
+ #if OPTION_FP2_SOCKET_SUPPORT
+ extern PSC_TBL_ENTRY TNSAOTblEntSODWNSO3;
+ #define PSC_TBL_TN_SODWN_SODIMM3_SAO &TNSAOTblEntSODWNSO3,
+ extern PSC_TBL_ENTRY TNDramTermTblEntSODWNSO;
+ #define PSC_TBL_TN_SODWN_SODIMM3_DRAM_TERM &TNDramTermTblEntSODWNSO,
+ extern PSC_TBL_ENTRY TNMaxFreqTblEntSODWNSO;
+ #define PSC_TBL_TN_SODWN_SODIMM3_MAX_FREQ &TNMaxFreqTblEntSODWNSO,
+ extern PSC_TBL_ENTRY TNMaxFreqTblEntSOFP2;
+ #define PSC_TBL_TN_SODIMM3_MAX_FREQ_FP2 &TNMaxFreqTblEntSOFP2,
+ extern PSC_TBL_ENTRY RLMaxFreqTblEntSOFP2;
+ #define PSC_TBL_RL_SODIMM3_MAX_FREQ_FP2 &RLMaxFreqTblEntSOFP2,
+ #undef PSC_TBL_TN_SODIMM3_S2D_FP2
+ #define PSC_TBL_TN_SODIMM3_S2D_FP2
+ #endif
+ #endif
+ extern PSC_TBL_ENTRY TNMR0WrTblEntry;
+ extern PSC_TBL_ENTRY TNMR0CLTblEntry;
+ extern PSC_TBL_ENTRY TNDdr3CKETriEnt;
+ extern PSC_TBL_ENTRY TNOdtPatTblEnt;
+
+
+ #ifndef PSC_TBL_TN_SODIMM3_MAX_FREQ
+ #define PSC_TBL_TN_SODIMM3_MAX_FREQ
+ #endif
+ #ifndef PSC_TBL_TN_SODIMM3_MAX_FREQ_FS1
+ #define PSC_TBL_TN_SODIMM3_MAX_FREQ_FS1
+ #endif
+ #ifndef PSC_TBL_TN_SODIMM3_MAX_FREQ_FP2
+ #define PSC_TBL_TN_SODIMM3_MAX_FREQ_FP2
+ #endif
+ #ifndef PSC_TBL_RL_SODIMM3_MAX_FREQ_FP2
+ #define PSC_TBL_RL_SODIMM3_MAX_FREQ_FP2
+ #endif
+ #ifndef PSC_TBL_TN_SODWN_SODIMM3_MAX_FREQ
+ #define PSC_TBL_TN_SODWN_SODIMM3_MAX_FREQ
+ #endif
+ #ifndef PSC_TBL_TN_UDIMM3_MAX_FREQ
+ #define PSC_TBL_TN_UDIMM3_MAX_FREQ
+ #endif
+ #ifndef PSC_TBL_RL_UDIMM3_MAX_FREQ
+ #define PSC_TBL_RL_UDIMM3_MAX_FREQ
+ #endif
+ #ifndef PSC_TBL_TN_UDIMM3_MAX_FREQ_FM2
+ #define PSC_TBL_TN_UDIMM3_MAX_FREQ_FM2
+ #endif
+ #ifndef PSC_TBL_RL_UDIMM3_MAX_FREQ_FM2
+ #define PSC_TBL_RL_UDIMM3_MAX_FREQ_FM2
+ #endif
+ #ifndef PSC_TBL_TN_UDIMM3_DRAM_TERM
+ #define PSC_TBL_TN_UDIMM3_DRAM_TERM
+ #endif
+ #ifndef PSC_TBL_TN_SODIMM3_DRAM_TERM
+ #define PSC_TBL_TN_SODIMM3_DRAM_TERM
+ #endif
+ #ifndef PSC_TBL_TN_SODWN_SODIMM3_DRAM_TERM
+ #define PSC_TBL_TN_SODWN_SODIMM3_DRAM_TERM
+ #endif
+ #ifndef PSC_TBL_TN_SODIMM3_SAO
+ #define PSC_TBL_TN_SODIMM3_SAO
+ #endif
+ #ifndef PSC_TBL_TN_SODWN_SODIMM3_SAO
+ #define PSC_TBL_TN_SODWN_SODIMM3_SAO
+ #endif
+ #ifndef PSC_TBL_TN_UDIMM3_SAO
+ #define PSC_TBL_TN_UDIMM3_SAO
+ #endif
+ #ifndef PSC_TBL_TN_CLK_DIS_FM2
+ #define PSC_TBL_TN_CLK_DIS_FM2
+ #endif
+ #ifndef PSC_TBL_TN_ODT_TRI_FM2
+ #define PSC_TBL_TN_ODT_TRI_FM2
+ #endif
+ #ifndef PSC_TBL_TN_CS_TRI_FM2
+ #define PSC_TBL_TN_CS_TRI_FM2
+ #endif
+ #ifndef PSC_TBL_TN_CLK_DIS_FS1
+ #define PSC_TBL_TN_CLK_DIS_FS1
+ #endif
+ #ifndef PSC_TBL_TN_ODT_TRI_FS1
+ #define PSC_TBL_TN_ODT_TRI_FS1
+ #endif
+ #ifndef PSC_TBL_TN_CS_TRI_FS1
+ #define PSC_TBL_TN_CS_TRI_FS1
+ #endif
+ #ifndef PSC_TBL_TN_CLK_DIS_FP2
+ #define PSC_TBL_TN_CLK_DIS_FP2
+ #endif
+ #ifndef PSC_TBL_TN_ODT_TRI_FP2
+ #define PSC_TBL_TN_ODT_TRI_FP2
+ #endif
+ #ifndef PSC_TBL_TN_CS_TRI_FP2
+ #define PSC_TBL_TN_CS_TRI_FP2
+ #endif
+
+ PSC_TBL_ENTRY* memPSCTblMaxFreqArrayTN[] = {
+ PSC_TBL_TN_SODIMM3_MAX_FREQ_FS1
+ PSC_TBL_TN_SODIMM3_MAX_FREQ_FP2
+ PSC_TBL_RL_SODIMM3_MAX_FREQ_FP2
+ PSC_TBL_TN_SODIMM3_MAX_FREQ
+ PSC_TBL_TN_SODWN_SODIMM3_MAX_FREQ
+ PSC_TBL_TN_UDIMM3_MAX_FREQ_FM2
+ PSC_TBL_RL_UDIMM3_MAX_FREQ_FM2
+ PSC_TBL_TN_UDIMM3_MAX_FREQ
+ PSC_TBL_RL_UDIMM3_MAX_FREQ
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblDramTermArrayTN[] = {
+ PSC_TBL_TN_UDIMM3_DRAM_TERM
+ PSC_TBL_TN_SODIMM3_DRAM_TERM
+ PSC_TBL_TN_SODWN_SODIMM3_DRAM_TERM
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblODTPatArrayTN[] = {
+ &TNOdtPatTblEnt,
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblSAOArrayTN[] = {
+ PSC_TBL_TN_SODIMM3_SAO
+ PSC_TBL_TN_SODWN_SODIMM3_SAO
+ PSC_TBL_TN_UDIMM3_SAO
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblMR0WRArrayTN[] = {
+ &TNMR0WrTblEntry,
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblMR0CLArrayTN[] = {
+ &TNMR0CLTblEntry,
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblGenArrayTN[] = {
+ &TNDdr3CKETriEnt,
+ PSC_TBL_TN_CLK_DIS_FM2
+ PSC_TBL_TN_ODT_TRI_FM2
+ PSC_TBL_TN_CS_TRI_FM2
+ PSC_TBL_TN_CLK_DIS_FS1
+ PSC_TBL_TN_ODT_TRI_FS1
+ PSC_TBL_TN_CS_TRI_FS1
+ PSC_TBL_TN_CLK_DIS_FP2
+ PSC_TBL_TN_ODT_TRI_FP2
+ PSC_TBL_TN_CS_TRI_FP2
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblS2DArrayTN[] = {
+ PSC_TBL_TN_UDIMM3_S2D_FM2
+ PSC_TBL_TN_SODIMM3_S2D_FS1
+ PSC_TBL_TN_SODIMM3_S2D_FP2
+ PSC_TBL_TN_SODIMM3_S2D_FM2
+ PSC_TBL_END
+ };
+
+ MEM_PSC_TABLE_BLOCK memPSCTblBlockTN = {
+ (PSC_TBL_ENTRY **)&memPSCTblMaxFreqArrayTN,
+ (PSC_TBL_ENTRY **)&memPSCTblDramTermArrayTN,
+ (PSC_TBL_ENTRY **)&memPSCTblODTPatArrayTN,
+ (PSC_TBL_ENTRY **)&memPSCTblSAOArrayTN,
+ (PSC_TBL_ENTRY **)&memPSCTblMR0WRArrayTN,
+ (PSC_TBL_ENTRY **)&memPSCTblMR0CLArrayTN,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ (PSC_TBL_ENTRY **)&memPSCTblGenArrayTN,
+ (PSC_TBL_ENTRY **)&memPSCTblS2DArrayTN,
+ NULL,
+ NULL
+ };
+
+ extern MEM_PSC_FLOW MemPGetMaxFreqSupported;
+ extern MEM_PSC_FLOW MemPGetRttNomWr;
+ extern MEM_PSC_FLOW MemPGetODTPattern;
+ extern MEM_PSC_FLOW MemPGetSAO;
+ extern MEM_PSC_FLOW MemPGetMR0WrCL;
+ extern MEM_PSC_FLOW MemPGetS2D;
+
+ MEM_PSC_FLOW_BLOCK memPlatSpecFlowTN = {
+ &memPSCTblBlockTN,
+ MemPGetMaxFreqSupported,
+ MemPGetRttNomWr,
+ MemPGetODTPattern,
+ MemPGetSAO,
+ MemPGetMR0WrCL,
+ MEM_PSC_FLOW_DEFTRUE,
+ MEM_PSC_FLOW_DEFTRUE,
+ MEM_PSC_FLOW_DEFTRUE,
+ MEM_PSC_FLOW_DEFTRUE,
+ MEM_PSC_FLOW_DEFTRUE,
+ MemPGetS2D,
+ MEM_PSC_FLOW_DEFTRUE
+ };
+ #define MEM_PSC_FLOW_BLOCK_TN &memPlatSpecFlowTN,
+ #else
+ #define MEM_PSC_FLOW_BLOCK_TN
+ #endif
+
+
+ #define PSC_TBL_KB_UDIMM3_S2D_FT3
+ #define PSC_TBL_KB_SODIMM3_S2D_FT3
+ #if OPTION_MEMCTLR_KB
+ #if OPTION_FT3_SOCKET_SUPPORT
+ extern PSC_TBL_ENTRY KBClkDisMapEntSOFT3;
+ #define PSC_TBL_KB_CLK_DIS_FT3 &KBClkDisMapEntSOFT3,
+ extern PSC_TBL_ENTRY KBSODdr3ODTTriEntFT3;
+ #define PSC_TBL_KB_ODT_TRI_FT3 &KBSODdr3ODTTriEntFT3,
+ extern PSC_TBL_ENTRY KBSODdr3CSTriEntFT3;
+ #define PSC_TBL_KB_CS_TRI_FT3 &KBSODdr3CSTriEntFT3,
+ #endif
+ #if OPTION_UDIMMS
+ extern PSC_TBL_ENTRY KBMaxFreqTblEntU;
+ #define PSC_TBL_KB_UDIMM3_MAX_FREQ &KBMaxFreqTblEntU,
+ extern PSC_TBL_ENTRY KBDramTermTblEntU;
+ #define PSC_TBL_KB_UDIMM3_DRAM_TERM &KBDramTermTblEntU,
+ extern PSC_TBL_ENTRY KBSAOTblEntU3;
+ #define PSC_TBL_KB_UDIMM3_SAO &KBSAOTblEntU3,
+ #undef PSC_TBL_KB_UDIMM3_S2D_FT3
+ extern PSC_TBL_ENTRY S2DTblEntUFT3;
+ #define PSC_TBL_KB_UDIMM3_S2D_FT3 &S2DTblEntUFT3,
+ #endif
+ #if OPTION_SODIMMS
+ #if OPTION_FT3_SOCKET_SUPPORT
+ extern PSC_TBL_ENTRY KBSAOTblEntSO3;
+ #define PSC_TBL_KB_SODIMM3_SAO &KBSAOTblEntSO3,
+ extern PSC_TBL_ENTRY KBSAOTblEntSoDwnPlusSODIMM3;
+ #define PSC_TBL_KB_SODWN_PLUS_SODIMM3_SAO &KBSAOTblEntSoDwnPlusSODIMM3,
+ extern PSC_TBL_ENTRY KBSAOTblEntSoDwn3;
+ #define PSC_TBL_KB_SODWN_SAO &KBSAOTblEntSoDwn3,
+ extern PSC_TBL_ENTRY KBDramTermTblEntSO3;
+ #define PSC_TBL_KB_SODIMM3_DRAM_TERM &KBDramTermTblEntSO3,
+ extern PSC_TBL_ENTRY KBDramTermTblEntSoDwnPlusSODIMM3;
+ #define PSC_TBL_KB_SODWN_PLUS_SODIMM3_DRAM_TERM &KBDramTermTblEntSoDwnPlusSODIMM3,
+ extern PSC_TBL_ENTRY KBDramTermTblEntSoDwn3;
+ #define PSC_TBL_KB_SODWN_DRAM_TERM &KBDramTermTblEntSoDwn3,
+ extern PSC_TBL_ENTRY KBMaxFreqTblEntSO6L;
+ #define PSC_TBL_KB_SODIMM3_MAX_FREQ_6L &KBMaxFreqTblEntSO6L,
+ extern PSC_TBL_ENTRY KBMaxFreqTblEntSO4L;
+ #define PSC_TBL_KB_SODIMM3_MAX_FREQ_4L &KBMaxFreqTblEntSO4L,
+ extern PSC_TBL_ENTRY KBMaxFreqTblEntSoDwnPlusSODIMM6L;
+ #define PSC_TBL_KB_SODWN_PLUS_SODIMM3_MAX_FREQ_6L &KBMaxFreqTblEntSoDwnPlusSODIMM6L,
+ extern PSC_TBL_ENTRY KBMaxFreqTblEntSoDwnPlusSODIMM4L;
+ #define PSC_TBL_KB_SODWN_PLUS_SODIMM3_MAX_FREQ_4L &KBMaxFreqTblEntSoDwnPlusSODIMM6L,
+ extern PSC_TBL_ENTRY KBMaxFreqTblEntSoDwn;
+ #define PSC_TBL_KB_SODWN_MAX_FREQ &KBMaxFreqTblEntSoDwn,
+ extern PSC_TBL_ENTRY KBMaxFreqTblEntU6L;
+ #define PSC_TBL_KB_UDIMM3_MAX_FREQ_6L &KBMaxFreqTblEntU6L,
+ extern PSC_TBL_ENTRY KBMaxFreqTblEntU4L;
+ #define PSC_TBL_KB_UDIMM3_MAX_FREQ_4L &KBMaxFreqTblEntU4L,
+ #undef PSC_TBL_KB_SODIMM3_S2D_FT3
+ #define PSC_TBL_KB_SODIMM3_S2D_FT3
+ #endif
+ #endif
+ extern PSC_TBL_ENTRY KBMR0WrTblEntry;
+ extern PSC_TBL_ENTRY KBMR0CLTblEntry;
+ extern PSC_TBL_ENTRY KBDdr3CKETriEnt;
+ extern PSC_TBL_ENTRY KB1DOdtPatTblEnt;
+ extern PSC_TBL_ENTRY KB2DOdtPatTblEnt;
+
+ #ifndef PSC_TBL_KB_SODIMM3_MAX_FREQ_6L
+ #define PSC_TBL_KB_SODIMM3_MAX_FREQ_6L
+ #endif
+ #ifndef PSC_TBL_KB_SODIMM3_MAX_FREQ_4L
+ #define PSC_TBL_KB_SODIMM3_MAX_FREQ_4L
+ #endif
+ #ifndef PSC_TBL_KB_SODWN_PLUS_SODIMM3_MAX_FREQ_6L
+ #define PSC_TBL_KB_SODWN_PLUS_SODIMM3_MAX_FREQ_6L
+ #endif
+ #ifndef PSC_TBL_KB_SODWN_PLUS_SODIMM3_MAX_FREQ_4L
+ #define PSC_TBL_KB_SODWN_PLUS_SODIMM3_MAX_FREQ_4L
+ #endif
+ #ifndef PSC_TBL_KB_SODWN_MAX_FREQ
+ #define PSC_TBL_KB_SODWN__MAX_FREQ
+ #endif
+ #ifndef PSC_TBL_KB_UDIMM3_MAX_FREQ_6L
+ #define PSC_TBL_KB_UDIMM3_MAX_FREQ_6L
+ #endif
+ #ifndef PSC_TBL_KB_UDIMM3_MAX_FREQ_4L
+ #define PSC_TBL_KB_UDIMM3_MAX_FREQ_4L
+ #endif
+ #ifndef PSC_TBL_KB_UDIMM3_DRAM_TERM
+ #define PSC_TBL_KB_UDIMM3_DRAM_TERM
+ #endif
+ #ifndef PSC_TBL_KB_SODIMM3_DRAM_TERM
+ #define PSC_TBL_KB_SODIMM3_DRAM_TERM
+ #endif
+ #ifndef PSC_TBL_KB_SODWN_PLUS_SODIMM3_DRAM_TERM
+ #define PSC_TBL_KB_SODWN_PLUS_SODIMM3_DRAM_TERM
+ #endif
+ #ifndef PSC_TBL_KB_SODWN_DRAM_TERM
+ #define PSC_TBL_KB_SODWN_DRAM_TERM
+ #endif
+ #ifndef PSC_TBL_KB_SODIMM3_SAO
+ #define PSC_TBL_KB_SODIMM3_SAO
+ #endif
+ #ifndef PSC_TBL_KB_SODWN_PLUS_SODIMM3_SAO
+ #define PSC_TBL_KB_SODWN_PLUS_SODIMM3_SAO
+ #endif
+ #ifndef PSC_TBL_KB_SODWN_SAO
+ #define PSC_TBL_KB_SODWN_SAO
+ #endif
+ #ifndef PSC_TBL_KB_UDIMM3_SAO
+ #define PSC_TBL_KB_UDIMM3_SAO
+ #endif
+ #ifndef PSC_TBL_KB_CLK_DIS_FT3
+ #define PSC_TBL_KB_CLK_DIS_FT3
+ #endif
+ #ifndef PSC_TBL_KB_ODT_TRI_FT3
+ #define PSC_TBL_KB_ODT_TRI_FT3
+ #endif
+ #ifndef PSC_TBL_KB_CS_TRI_FT3
+ #define PSC_TBL_KB_CS_TRI_FT3
+ #endif
+
+ PSC_TBL_ENTRY* memPSCTblMaxFreqArrayKB[] = {
+ // 4 layer tables block
+ PSC_TBL_KB_SODIMM3_MAX_FREQ_4L
+ PSC_TBL_KB_SODWN_PLUS_SODIMM3_MAX_FREQ_4L
+ PSC_TBL_KB_SODWN_MAX_FREQ
+ PSC_TBL_KB_UDIMM3_MAX_FREQ_4L
+ PSC_TBL_END,
+ // 6 layer tables block
+ PSC_TBL_KB_SODIMM3_MAX_FREQ_6L
+ PSC_TBL_KB_SODWN_PLUS_SODIMM3_MAX_FREQ_6L
+ PSC_TBL_KB_SODWN_MAX_FREQ
+ PSC_TBL_KB_UDIMM3_MAX_FREQ_6L
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblDramTermArrayKB[] = {
+ PSC_TBL_KB_UDIMM3_DRAM_TERM
+ PSC_TBL_KB_SODIMM3_DRAM_TERM
+ PSC_TBL_KB_SODWN_PLUS_SODIMM3_DRAM_TERM
+ PSC_TBL_KB_SODWN_DRAM_TERM
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblODTPatArrayKB[] = {
+ &KB1DOdtPatTblEnt,
+ &KB2DOdtPatTblEnt,
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblSAOArrayKB[] = {
+ PSC_TBL_KB_SODIMM3_SAO
+ PSC_TBL_KB_SODWN_PLUS_SODIMM3_SAO
+ PSC_TBL_KB_SODWN_SAO
+ PSC_TBL_KB_UDIMM3_SAO
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblMR0WRArrayKB[] = {
+ &KBMR0WrTblEntry,
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblMR0CLArrayKB[] = {
+ &KBMR0CLTblEntry,
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblGenArrayKB[] = {
+ &KBDdr3CKETriEnt,
+ PSC_TBL_KB_CLK_DIS_FT3
+ PSC_TBL_KB_ODT_TRI_FT3
+ PSC_TBL_KB_CS_TRI_FT3
+ PSC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memPSCTblS2DArrayKB[] = {
+ PSC_TBL_KB_UDIMM3_S2D_FT3
+ PSC_TBL_KB_SODIMM3_S2D_FT3
+ PSC_TBL_END
+ };
+
+ MEM_PSC_TABLE_BLOCK memPSCTblBlockKB = {
+ (PSC_TBL_ENTRY **)&memPSCTblMaxFreqArrayKB,
+ (PSC_TBL_ENTRY **)&memPSCTblDramTermArrayKB,
+ (PSC_TBL_ENTRY **)&memPSCTblODTPatArrayKB,
+ (PSC_TBL_ENTRY **)&memPSCTblSAOArrayKB,
+ (PSC_TBL_ENTRY **)&memPSCTblMR0WRArrayKB,
+ (PSC_TBL_ENTRY **)&memPSCTblMR0CLArrayKB,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ (PSC_TBL_ENTRY **)&memPSCTblGenArrayKB,
+ (PSC_TBL_ENTRY **)&memPSCTblS2DArrayKB,
+ NULL,
+ NULL
+ };
+
+ extern MEM_PSC_FLOW MemPGetMaxFreqSupported;
+ extern MEM_PSC_FLOW MemPGetRttNomWr;
+ extern MEM_PSC_FLOW MemPGetODTPattern;
+ extern MEM_PSC_FLOW MemPGetSAO;
+ extern MEM_PSC_FLOW MemPGetMR0WrCL;
+ extern MEM_PSC_FLOW MemPGetS2D;
+
+ MEM_PSC_FLOW_BLOCK memPlatSpecFlowKB = {
+ &memPSCTblBlockKB,
+ MemPGetMaxFreqSupported,
+ MemPGetRttNomWr,
+ MemPGetODTPattern,
+ MemPGetSAO,
+ MemPGetMR0WrCL,
+ MEM_PSC_FLOW_DEFTRUE,
+ MEM_PSC_FLOW_DEFTRUE,
+ MEM_PSC_FLOW_DEFTRUE,
+ MEM_PSC_FLOW_DEFTRUE,
+ MEM_PSC_FLOW_DEFTRUE,
+ MemPGetS2D,
+ MEM_PSC_FLOW_DEFTRUE
+ };
+ #define MEM_PSC_FLOW_BLOCK_KB &memPlatSpecFlowKB,
+ #else
+ #define MEM_PSC_FLOW_BLOCK_KB
+ #endif
+
+
+ MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[] = {
+ MEM_PSC_FLOW_BLOCK_TN
+ MEM_PSC_FLOW_BLOCK_KB
+ MEM_PSC_FLOW_BLOCK_END
+ };
+
+ /*---------------------------------------------------------------------------------------------------
+ *
+ * LRDIMM CONTROL
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ #if (OPTION_LRDIMMS == TRUE)
+ #if (OPTION_MEMCTLR_BK == TRUE)
+ #define MEM_TECH_FEATURE_LRDIMM_INIT &MemTLrdimmConstructor3
+ #else
+ #define MEM_TECH_FEATURE_LRDIMM_INIT MemTFeatDef
+ #endif
+ #else //#if (OPTION_LRDIMMS == FALSE)
+ #define MEM_TECH_FEATURE_LRDIMM_INIT MemTFeatDef
+ #endif
+ MEM_TECH_LRDIMM memLrdimmSupported = {
+ MEM_TECH_LRDIMM_STRUCT_VERSION,
+ MEM_TECH_FEATURE_LRDIMM_INIT
+ };
+#else
+ /*---------------------------------------------------------------------------------------------------
+ * MAIN FLOW CONTROL
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ MEM_FLOW_CFG* memFlowControlInstalled[] = {
+ NULL
+ };
+ /*---------------------------------------------------------------------------------------------------
+ * NB TRAINING FLOW CONTROL
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ OPTION_MEM_FEATURE_NB* memNTrainFlowControl[] = { // Training flow control
+ NULL
+ };
+ /*---------------------------------------------------------------------------------------------------
+ * DEFAULT TECHNOLOGY BLOCK
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ MEM_TECH_CONSTRUCTOR* memTechInstalled[] = { // Types of technology installed
+ NULL
+ };
+
+ /*---------------------------------------------------------------------------------------------------
+ * DEFAULT TECHNOLOGY MAP
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ UINT8 MemoryTechnologyMap[MAX_SOCKETS_SUPPORTED] = {0, 0, 0, 0, 0, 0, 0, 0};
+
+ /*---------------------------------------------------------------------------------------------------
+ * DEFAULT MAIN FEATURE BLOCK
+ *---------------------------------------------------------------------------------------------------
+ */
+ MEM_FEAT_BLOCK_MAIN MemFeatMain = {
+ NULL
+ };
+
+ /*---------------------------------------------------------------------------------------------------
+ * DEFAULT NORTHBRIDGE SUPPORT LIST
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ #if (OPTION_MEMCTLR_TN == TRUE)
+ #undef MEM_NB_SUPPORT_TN
+ #define MEM_NB_SUPPORT_TN { MEM_NB_SUPPORT_STRUCT_VERSION, NULL, NULL, NULL, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_TN, MEM_IDENDIMM_TN },
+ #endif
+ #if (OPTION_MEMCTLR_KB == TRUE)
+ #undef MEM_NB_SUPPORT_KB
+ #define MEM_NB_SUPPORT_KB { MEM_NB_SUPPORT_STRUCT_VERSION, NULL, NULL, NULL, MEM_FEATURE_S3_RESUME_CONSTRUCTOR_KB, MEM_IDENDIMM_KB },
+ #endif
+ /*---------------------------------------------------------------------------------------------------
+ * DEFAULT Technology Training
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ #if OPTION_DDR2
+ MEM_TECH_FEAT_BLOCK memTechTrainingFeatDDR2 = {
+ NULL
+ };
+ MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR2[] = {
+ NULL
+ };
+ #endif
+ #if OPTION_DDR3
+ MEM_TECH_FEAT_BLOCK memTechTrainingFeatDDR3 = {
+ NULL
+ };
+ MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR3[] = {
+ NULL
+ };
+ #endif
+ /*---------------------------------------------------------------------------------------------------
+ * DEFAULT Platform Specific list
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ /*----------------------------------------------------------------------
+ * DEFAULT PSCFG DEFINITIONS
+ *
+ *----------------------------------------------------------------------
+ */
+ MEM_PLATFORM_CFG* memPlatformTypeInstalled[] = {
+ NULL
+ };
+
+ /*----------------------------------------------------------------------
+ * EXTRACTABLE PLATFORM SPECIFIC CONFIGURATION
+ *
+ *----------------------------------------------------------------------
+ */
+ MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[] = {
+ NULL
+ };
+
+ MEM_TECH_LRDIMM memLrdimmSupported = {
+ MEM_TECH_LRDIMM_STRUCT_VERSION,
+ NULL
+ };
+#endif
+
+/*---------------------------------------------------------------------------------------------------
+ * NORTHBRIDGE SUPPORT LIST
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+MEM_NB_SUPPORT memNBInstalled[] = {
+ MEM_NB_SUPPORT_TN
+ MEM_NB_SUPPORT_KB
+ MEM_NB_SUPPORT_END
+};
+
+UINT8 SizeOfNBInstalledTable = sizeof (memNBInstalled) / sizeof (memNBInstalled[0]);
+
+
+#endif // _OPTION_MEMORY_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionMemoryRecovery.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionMemoryRecovery.h
new file mode 100644
index 0000000..79f7796
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionMemoryRecovery.h
@@ -0,0 +1,62 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Memory option API.
+ *
+ * Contains structures and values used to control the Memory option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_MEMORY_RECOVERY_H_
+#define _OPTION_MEMORY_RECOVERY_H_
+
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+
+typedef BOOLEAN MEM_REC_NB_CONSTRUCTOR (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN UINT8 NodeID
+ );
+
+typedef VOID MEM_REC_TECH_CONSTRUCTOR (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+#endif // _OPTION_MEMORY_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionMemoryRecoveryInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionMemoryRecoveryInstall.h
new file mode 100644
index 0000000..0ed16d5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionMemoryRecoveryInstall.h
@@ -0,0 +1,231 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Memory
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_MEMORY_RECOVERY_INSTALL_H_
+#define _OPTION_MEMORY_RECOVERY_INSTALL_H_
+
+#if (AGESA_ENTRY_INIT_RECOVERY == TRUE)
+
+ #if (OPTION_MEMCTLR_TN == TRUE)
+ extern MEM_REC_NB_CONSTRUCTOR MemRecConstructNBBlockTN;
+ #define MEM_REC_NB_SUPPORT_TN MemRecConstructNBBlockTN,
+ #else
+ #define MEM_REC_NB_SUPPORT_TN
+ #endif
+
+ MEM_REC_NB_CONSTRUCTOR* MemRecNBInstalled[] = {
+ MEM_REC_NB_SUPPORT_TN
+ NULL
+ };
+
+ #define MEM_REC_TECH_CONSTRUCTOR_DDR2
+ #if (OPTION_DDR3 == TRUE)
+ extern MEM_REC_TECH_CONSTRUCTOR MemRecConstructTechBlock3;
+ #define MEM_REC_TECH_CONSTRUCTOR_DDR3 MemRecConstructTechBlock3,
+ #else
+ #define MEM_REC_TECH_CONSTRUCTOR_DDR3
+ #endif
+
+ MEM_REC_TECH_CONSTRUCTOR* MemRecTechInstalled[] = {
+ MEM_REC_TECH_CONSTRUCTOR_DDR3
+ MEM_REC_TECH_CONSTRUCTOR_DDR2
+ NULL
+ };
+
+ MEM_PLATFORM_CFG* memRecPlatformTypeInstalled[] = {
+ NULL
+ };
+
+ /*---------------------------------------------------------------------------------------------------
+ * EXTRACTABLE PLATFORM SPECIFIC CONFIGURATION
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ #define MEM_PSC_REC_FLOW_BLOCK_END NULL
+ #define PSC_REC_TBL_END NULL
+ #define MEM_REC_PSC_FLOW_DEFTRUE (BOOLEAN (*) (MEM_NB_BLOCK*, MEM_PSC_TABLE_BLOCK *)) MemRecDefTrue
+
+ #if OPTION_MEMCTLR_TN
+ #if OPTION_UDIMMS
+ extern PSC_TBL_ENTRY RecTNDramTermTblEntU;
+ #define PSC_REC_TBL_TN_UDIMM3_DRAM_TERM &RecTNDramTermTblEntU,
+ extern PSC_TBL_ENTRY RecTNSAOTblEntU3;
+ #define PSC_REC_TBL_TN_UDIMM3_SAO &RecTNSAOTblEntU3,
+ #endif
+ #if OPTION_SODIMMS
+ extern PSC_TBL_ENTRY RecTNSAOTblEntSO3;
+ #define PSC_REC_TBL_TN_SODIMM3_SAO &RecTNSAOTblEntSO3,
+ extern PSC_TBL_ENTRY RecTNDramTermTblEntSO;
+ #define PSC_REC_TBL_TN_SODIMM3_DRAM_TERM &RecTNDramTermTblEntSO,
+ #endif
+ extern PSC_TBL_ENTRY RecTNMR0WrTblEntry;
+ extern PSC_TBL_ENTRY RecTNMR0CLTblEntry;
+ extern PSC_TBL_ENTRY RecTNDdr3CKETriEnt;
+ extern PSC_TBL_ENTRY RecTNOdtPatTblEnt;
+
+ #ifndef PSC_REC_TBL_TN_UDIMM3_DRAM_TERM
+ #define PSC_REC_TBL_TN_UDIMM3_DRAM_TERM
+ #endif
+ #ifndef PSC_REC_TBL_TN_SODIMM3_DRAM_TERM
+ #define PSC_REC_TBL_TN_SODIMM3_DRAM_TERM
+ #endif
+ #ifndef PSC_REC_TBL_TN_SODIMM3_SAO
+ #define PSC_REC_TBL_TN_SODIMM3_SAO
+ #endif
+ #ifndef PSC_REC_TBL_TN_UDIMM3_SAO
+ #define PSC_REC_TBL_TN_UDIMM3_SAO
+ #endif
+
+ PSC_TBL_ENTRY* memRecPSCTblDramTermArrayTN[] = {
+ PSC_REC_TBL_TN_UDIMM3_DRAM_TERM
+ PSC_REC_TBL_TN_SODIMM3_DRAM_TERM
+ PSC_REC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memRecPSCTblODTPatArrayTN[] = {
+ &RecTNOdtPatTblEnt,
+ PSC_REC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memRecPSCTblSAOArrayTN[] = {
+ PSC_REC_TBL_TN_SODIMM3_SAO
+ PSC_REC_TBL_TN_UDIMM3_SAO
+ PSC_REC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memRecPSCTblMR0WRArrayTN[] = {
+ &RecTNMR0WrTblEntry,
+ PSC_REC_TBL_END
+ };
+
+ PSC_TBL_ENTRY* memRecPSCTblMR0CLArrayTN[] = {
+ &RecTNMR0CLTblEntry,
+ PSC_REC_TBL_END
+ };
+
+ MEM_PSC_TABLE_BLOCK memRecPSCTblBlockTN = {
+ NULL,
+ (PSC_TBL_ENTRY **)&memRecPSCTblDramTermArrayTN,
+ (PSC_TBL_ENTRY **)&memRecPSCTblODTPatArrayTN,
+ (PSC_TBL_ENTRY **)&memRecPSCTblSAOArrayTN,
+ (PSC_TBL_ENTRY **)&memRecPSCTblMR0WRArrayTN,
+ (PSC_TBL_ENTRY **)&memRecPSCTblMR0CLArrayTN,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL
+ };
+ extern MEM_PSC_FLOW MemPRecGetRttNomWr;
+ #define PSC_REC_FLOW_TN_DRAM_TERM MemPRecGetRttNomWr
+ extern MEM_PSC_FLOW MemPRecGetODTPattern;
+ #define PSC_REC_FLOW_TN_ODT_PATTERN MemPRecGetODTPattern
+ extern MEM_PSC_FLOW MemPRecGetSAO;
+ #define PSC_REC_FLOW_TN_SAO MemPRecGetSAO
+ extern MEM_PSC_FLOW MemPRecGetMR0WrCL;
+ #define PSC_REC_FLOW_TN_MR0_WRCL MemPRecGetMR0WrCL
+
+ MEM_PSC_FLOW_BLOCK memRecPlatSpecFlowTN = {
+ &memRecPSCTblBlockTN,
+ MEM_REC_PSC_FLOW_DEFTRUE,
+ PSC_REC_FLOW_TN_DRAM_TERM,
+ PSC_REC_FLOW_TN_ODT_PATTERN,
+ PSC_REC_FLOW_TN_SAO,
+ PSC_REC_FLOW_TN_MR0_WRCL,
+ MEM_REC_PSC_FLOW_DEFTRUE,
+ MEM_REC_PSC_FLOW_DEFTRUE,
+ MEM_REC_PSC_FLOW_DEFTRUE,
+ MEM_REC_PSC_FLOW_DEFTRUE,
+ MEM_REC_PSC_FLOW_DEFTRUE,
+ MEM_REC_PSC_FLOW_DEFTRUE
+ };
+ #define MEM_PSC_REC_FLOW_BLOCK_TN &memRecPlatSpecFlowTN,
+ #else
+ #define MEM_PSC_REC_FLOW_BLOCK_TN
+ #endif
+
+ MEM_PSC_FLOW_BLOCK* memRecPlatSpecFlowArray[] = {
+ MEM_PSC_REC_FLOW_BLOCK_TN
+ MEM_PSC_REC_FLOW_BLOCK_END
+ };
+
+#else
+ /*---------------------------------------------------------------------------------------------------
+ * DEFAULT TECHNOLOGY BLOCK
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ MEM_TECH_CONSTRUCTOR* MemRecTechInstalled[] = { // Types of technology installed
+ NULL
+ };
+ /*---------------------------------------------------------------------------------------------------
+ * DEFAULT NORTHBRIDGE SUPPORT LIST
+ *
+ *
+ *---------------------------------------------------------------------------------------------------
+ */
+ MEM_REC_NB_CONSTRUCTOR* MemRecNBInstalled[] = {
+ NULL
+ };
+ /*----------------------------------------------------------------------
+ * DEFAULT PSCFG DEFINITIONS
+ *
+ *----------------------------------------------------------------------
+ */
+ MEM_PLATFORM_CFG* memRecPlatformTypeInstalled[] = {
+ NULL
+ };
+ /*----------------------------------------------------------------------
+ * EXTRACTABLE PLATFORM SPECIFIC CONFIGURATION
+ *
+ *----------------------------------------------------------------------
+ */
+ MEM_PSC_FLOW_BLOCK* memRecPlatSpecFlowArray[] = {
+ NULL
+ };
+#endif
+#endif // _OPTION_MEMORY_RECOVERY_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionMmioMapInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionMmioMapInstall.h
new file mode 100644
index 0000000..0150c1b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionMmioMapInstall.h
@@ -0,0 +1,93 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: MMIO map manager
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_MMIO_MAP_INSTALL_H_
+#define _OPTION_MMIO_MAP_INSTALL_H_
+
+#include "mmioMapManager.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+
+#define F15_MMIO_MAP_SUPPORT
+#define F16_MMIO_MAP_SUPPORT
+
+#if ((AGESA_ENTRY_INIT_ENV == TRUE) || (AGESA_ENTRY_INIT_MID == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE))
+ // Family 15h
+ #ifdef OPTION_FAMILY15H
+ #if OPTION_FAMILY15H == TRUE
+ extern CONST MMIO_MAP_FAMILY_SERVICES ROMDATA F15MmioMapSupport;
+ #undef F15_MMIO_MAP_SUPPORT
+ #define F15_MMIO_MAP_SUPPORT {AMD_FAMILY_15, &F15MmioMapSupport},
+ #endif
+ #endif
+
+ // Family 16h
+ #ifdef OPTION_FAMILY16H
+ #if OPTION_FAMILY16H == TRUE
+ extern CONST MMIO_MAP_FAMILY_SERVICES ROMDATA F16MmioMapSupport;
+ #undef F16_MMIO_MAP_SUPPORT
+ #define F16_MMIO_MAP_SUPPORT {AMD_FAMILY_16, &F16MmioMapSupport},
+ #endif
+ #endif
+
+#endif
+
+
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA MmioMapFamilyServiceArray[] =
+{
+ F15_MMIO_MAP_SUPPORT
+ F16_MMIO_MAP_SUPPORT
+ {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA MmioMapFamilyServiceTable =
+{
+ (sizeof (MmioMapFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &MmioMapFamilyServiceArray[0]
+};
+
+#endif // _OPTION_MMIO_MAP_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionMsgBasedC1eInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionMsgBasedC1eInstall.h
new file mode 100644
index 0000000..d99bb7c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionMsgBasedC1eInstall.h
@@ -0,0 +1,70 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Message-Based C1e
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_MSG_BASED_C1E_INSTALL_H_
+#define _OPTION_MSG_BASED_C1E_INSTALL_H_
+
+#include "cpuMsgBasedC1e.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_MSG_BASED_C1E_FEAT
+#define F15_BK_MSG_BASED_C1E_SUPPORT
+#if OPTION_MSG_BASED_C1E == TRUE
+ #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE)
+
+
+ CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA MsgBasedC1eFamilyServiceArray[] =
+ {
+ {0, NULL}
+ };
+ CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA MsgBasedC1eFamilyServiceTable =
+ {
+ (sizeof (MsgBasedC1eFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &MsgBasedC1eFamilyServiceArray[0]
+ };
+ #endif
+#endif
+#endif // _OPTION_MSG_BASED_C1E_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionMultiSocket.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionMultiSocket.h
new file mode 100644
index 0000000..c266aad
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionMultiSocket.h
@@ -0,0 +1,215 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Multi-socket option API.
+ *
+ * Contains structures and values used to control the multi-socket option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_MULTISOCKET_H_
+#define _OPTION_MULTISOCKET_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * This function loops through all possible socket locations, gathering the number
+ * of power management steps each populated socket requires, and returns the
+ * highest number.
+ *
+ * @param[out] NumSystemSteps Maximum number of system steps required
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+typedef VOID OPTION_MULTISOCKET_PM_STEPS (
+ OUT UINT8 *NumSystemSteps,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * This function loops through all possible socket locations, starting core 0 of
+ * each populated socket to perform the passed in AP_TASK. After starting all
+ * other core 0s, the BSC will perform the AP_TASK as well. This must be run by
+ * the system BSC only.
+ *
+ * @param[in] TaskPtr Function descriptor
+ * @param[in] StdHeader Config handle for library and services
+ * @param[in] ConfigParams AMD entry point's CPU parameter structure
+ *
+ * @return The most severe error code from AP_TASK
+ *
+ */
+typedef AGESA_STATUS OPTION_MULTISOCKET_PM_CORE0_TASK (
+ IN VOID *TaskPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN VOID *ConfigParams
+ );
+
+/**
+ * This function loops through all possible socket locations, comparing the
+ * maximum NB frequencies to determine the slowest. This function also
+ * determines if all coherent NB frequencies are equivalent.
+ *
+ * @param[in] NbPstate NB P-state number to check (0 = fastest)
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[out] SystemNbCofNumerator NB frequency numerator for the system in MHz
+ * @param[out] SystemNbCofDenominator NB frequency denominator for the system
+ * @param[out] SystemNbCofsMatch Whether or not all NB frequencies are equivalent
+ * @param[out] NbPstateIsEnabledOnAllCPUs Whether or not NbPstate is valid on all CPUs
+ * @param[in] StdHeader Config handle for library and services
+ *
+ * @retval TRUE At least one processor has NbPstate enabled.
+ * @retval FALSE NbPstate is disabled on all CPUs
+ */
+typedef BOOLEAN OPTION_MULTISOCKET_PM_NB_COF (
+ IN UINT32 NbPstate,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT UINT32 *SystemNbCofNumerator,
+ OUT UINT32 *SystemNbCofDenominator,
+ OUT BOOLEAN *SystemNbCofsMatch,
+ OUT BOOLEAN *NbPstateIsEnabledOnAllCPUs,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * This function loops through all possible socket locations, checking whether
+ * any populated sockets require NB COF VID programming.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+typedef BOOLEAN OPTION_MULTISOCKET_PM_NB_COF_UPDATE (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * This function loops through all possible socket locations, collecting any
+ * power management initialization errors that may have occurred. These errors
+ * are transferred from the core 0s of the socket in which the errors occurred
+ * to the BSC's heap. The BSC's heap is then searched for the most severe error
+ * that occurred, and returns it. This function must be called by the BSC only.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+typedef AGESA_STATUS OPTION_MULTISOCKET_PM_GET_EVENTS (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * This function loops through all possible socket locations and Nb Pstates,
+ * comparing the NB frequencies to determine the slowest NB P0 and NB Pmin in
+ * the system.
+ *
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[out] MinSysNbFreq NB frequency numerator for the system in MHz
+ * @param[out] MinP0NbFreq NB frequency numerator for P0 in MHz
+ * @param[in] StdHeader Config handle for library and services
+ */
+typedef VOID OPTION_MULTISOCKET_PM_NB_MIN_COF (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT UINT32 *MinSysNbFreq,
+ OUT UINT32 *MinP0NbFreq,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * This function returns the current running core's PCI Config Space address.
+ *
+ * @param[out] PciAddress The Processor's PCI Config Space address (Function 0, Register 0)
+ * @param[in] StdHeader Header for library and services.
+ */
+typedef BOOLEAN OPTION_MULTISOCKET_GET_PCI_ADDRESS (
+ OUT PCI_ADDR *PciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * This function writes to all nodes on the executing core's socket.
+ *
+ * @param[in] PciAddress The Function and Register to update
+ * @param[in] Mask The bitwise AND mask to apply to the current register value
+ * @param[in] Data The bitwise OR mask to apply to the current register value
+ * @param[in] StdHeader Header for library and services.
+ *
+ */
+typedef VOID OPTION_MULTISOCKET_MODIFY_CURR_SOCKET_PCI (
+ IN PCI_ADDR *PciAddress,
+ IN UINT32 Mask,
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#define MULTISOCKET_STRUCT_VERSION 0x01
+
+/**
+ * Provide build configuration of cpu multi-socket or single socket support.
+ *
+ */
+typedef struct {
+ UINT16 OptMultiSocketVersion; ///< Table version
+ OPTION_MULTISOCKET_PM_STEPS *GetNumberOfSystemPmSteps; ///< Method: Get number of power mgt tasks
+ OPTION_MULTISOCKET_PM_CORE0_TASK *BscRunCodeOnAllSystemCore0s; ///< Method: Perform tasks on Core 0 of each processor
+ OPTION_MULTISOCKET_PM_NB_COF *GetSystemNbPstateSettings; ///< Method: Find the Northbridge frequency for the specified Nb Pstate in the system.
+ OPTION_MULTISOCKET_PM_NB_COF_UPDATE *GetSystemNbCofVidUpdate; ///< Method: Determine if any Northbridges in the system need to update their COF/VID.
+ OPTION_MULTISOCKET_PM_GET_EVENTS *BscRetrievePmEarlyInitErrors; ///< Method: Gathers error information from all Core 0s.
+ OPTION_MULTISOCKET_PM_NB_MIN_COF *GetMinNbCof; ///< Method: Get the minimum system and minimum P0 Northbridge frequency.
+ OPTION_MULTISOCKET_GET_PCI_ADDRESS *GetCurrPciAddr; ///< Method: Get PCI Config Space Address for the current running core.
+ OPTION_MULTISOCKET_MODIFY_CURR_SOCKET_PCI *ModifyCurrSocketPci; ///< Method: Writes to all nodes on the executing core's socket.
+} OPTION_MULTISOCKET_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif // _OPTION_MULTISOCKET_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionMultiSocketInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionMultiSocketInstall.h
new file mode 100644
index 0000000..cc79ceb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionMultiSocketInstall.h
@@ -0,0 +1,104 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Multiple Socket Support
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_MULTISOCKET_INSTALL_H_
+#define _OPTION_MULTISOCKET_INSTALL_H_
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#ifndef OPTION_MULTISOCKET
+ #error BLDOPT: Option not defined: "OPTION_MULTISOCKET"
+#endif
+
+#if OPTION_MULTISOCKET == TRUE
+ OPTION_MULTISOCKET_PM_STEPS GetNumberOfSystemPmStepsPtrMulti;
+ #define GET_NUM_PM_STEPS GetNumberOfSystemPmStepsPtrMulti
+ OPTION_MULTISOCKET_PM_CORE0_TASK RunCodeOnAllSystemCore0sMulti;
+ #define CORE0_PM_TASK RunCodeOnAllSystemCore0sMulti
+ OPTION_MULTISOCKET_PM_NB_COF GetSystemNbCofMulti;
+ #define GET_SYS_NB_COF GetSystemNbCofMulti
+ OPTION_MULTISOCKET_PM_NB_COF_UPDATE GetSystemNbCofVidUpdateMulti;
+ #define GET_SYS_NB_COF_UPDATE GetSystemNbCofVidUpdateMulti
+ OPTION_MULTISOCKET_PM_GET_EVENTS GetEarlyPmErrorsMulti;
+ #define GET_EARLY_PM_ERRORS GetEarlyPmErrorsMulti
+ OPTION_MULTISOCKET_PM_NB_MIN_COF GetMinNbCofMulti;
+ #define GET_MIN_NB_COF GetMinNbCofMulti
+ OPTION_MULTISOCKET_GET_PCI_ADDRESS GetCurrPciAddrMulti;
+ #define GET_PCI_ADDRESS GetCurrPciAddrMulti
+ OPTION_MULTISOCKET_MODIFY_CURR_SOCKET_PCI ModifyCurrSocketPciMulti;
+ #define MODIFY_CURR_SOCKET_PCI ModifyCurrSocketPciMulti
+#else
+ OPTION_MULTISOCKET_PM_STEPS GetNumberOfSystemPmStepsPtrSingle;
+ #define GET_NUM_PM_STEPS GetNumberOfSystemPmStepsPtrSingle
+ OPTION_MULTISOCKET_PM_CORE0_TASK RunCodeOnAllSystemCore0sSingle;
+ #define CORE0_PM_TASK RunCodeOnAllSystemCore0sSingle
+ OPTION_MULTISOCKET_PM_NB_COF GetSystemNbCofSingle;
+ #define GET_SYS_NB_COF GetSystemNbCofSingle
+ OPTION_MULTISOCKET_PM_NB_COF_UPDATE GetSystemNbCofVidUpdateSingle;
+ #define GET_SYS_NB_COF_UPDATE GetSystemNbCofVidUpdateSingle
+ OPTION_MULTISOCKET_PM_GET_EVENTS GetEarlyPmErrorsSingle;
+ #define GET_EARLY_PM_ERRORS GetEarlyPmErrorsSingle
+ OPTION_MULTISOCKET_PM_NB_MIN_COF GetMinNbCofSingle;
+ #define GET_MIN_NB_COF GetMinNbCofSingle
+ OPTION_MULTISOCKET_GET_PCI_ADDRESS GetCurrPciAddrSingle;
+ #define GET_PCI_ADDRESS GetCurrPciAddrSingle
+ OPTION_MULTISOCKET_MODIFY_CURR_SOCKET_PCI ModifyCurrSocketPciSingle;
+ #define MODIFY_CURR_SOCKET_PCI ModifyCurrSocketPciSingle
+#endif
+
+/* Declare the instance of the multisocket option configuration structure */
+OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration = {
+ MULTISOCKET_STRUCT_VERSION,
+ GET_NUM_PM_STEPS,
+ CORE0_PM_TASK,
+ GET_SYS_NB_COF,
+ GET_SYS_NB_COF_UPDATE,
+ GET_EARLY_PM_ERRORS,
+ GET_MIN_NB_COF,
+ GET_PCI_ADDRESS,
+ MODIFY_CURR_SOCKET_PCI
+};
+
+#endif // _OPTION_MULTISOCKET_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionPrefetchModeInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionPrefetchModeInstall.h
new file mode 100644
index 0000000..aa510aa
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionPrefetchModeInstall.h
@@ -0,0 +1,107 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Prefetch Mode
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_PREFETCH_MODE_INSTALL_H_
+#define _OPTION_PREFETCH_MODE_INSTALL_H_
+
+#include "cpuPrefetchMode.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_PREFETCH_MODE_FEAT
+#define CPU_PREFETCH_MODE_AP_TASK
+#define F15_PREFETCH_MODE_SUPPORT
+#define F16_PREFETCH_MODE_SUPPORT
+
+#if OPTION_PREFETCH_MODE == TRUE
+ #if (AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_LATE_RESTORE == TRUE)
+ #undef AGESA_ENTRY_LATE_RUN_AP_TASK
+ #define AGESA_ENTRY_LATE_RUN_AP_TASK TRUE
+ #undef CPU_PREFETCH_MODE_AP_TASK
+ #define CPU_PREFETCH_MODE_AP_TASK {AP_LATE_TASK_CPU_PREFETCH_MODE, (IMAGE_ENTRY) CpuPrefetchModeApTask},
+
+ // Family 15h
+ #ifdef OPTION_FAMILY15H
+ #if OPTION_FAMILY15H == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeaturePrefetchMode;
+ #undef OPTION_PREFETCH_MODE_FEAT
+ #define OPTION_PREFETCH_MODE_FEAT &CpuFeaturePrefetchMode,
+ extern CONST PREFETCH_MODE_FAMILY_SERVICES ROMDATA F15PrefetchModeSupport;
+ #undef F15_PREFETCH_MODE_SUPPORT
+ #define F15_PREFETCH_MODE_SUPPORT {AMD_FAMILY_15, &F15PrefetchModeSupport},
+ #endif
+ #endif
+
+
+ ///@todo
+ // Family 16h
+ //#ifdef OPTION_FAMILY16H
+ // #if OPTION_FAMILY16H == TRUE
+ // extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeaturePrefetchMode;
+ // #undef OPTION_PREFETCH_MODE_FEAT
+ // #define OPTION_PREFETCH_MODE_FEAT &CpuFeaturePrefetchMode,
+ // extern CONST PREFETCH_MODE_FAMILY_SERVICES ROMDATA F16PrefetchModeSupport;
+ // #undef F16_PREFETCH_MODE_SUPPORT
+ // #define F16_PREFETCH_MODE_SUPPORT {AMD_FAMILY_16, &F16PrefetchModeSupport},
+ // #endif
+ //#endif
+
+ #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA PrefetchModeFamilyServiceArray[] =
+{
+ F15_PREFETCH_MODE_SUPPORT
+ F16_PREFETCH_MODE_SUPPORT
+ {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA PrefetchModeFamilyServiceTable =
+{
+ (sizeof (PrefetchModeFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &PrefetchModeFamilyServiceArray[0]
+};
+
+#endif // _OPTION_PREFETCH_MODE_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionPreserveMailboxInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionPreserveMailboxInstall.h
new file mode 100644
index 0000000..1f32fee
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionPreserveMailboxInstall.h
@@ -0,0 +1,57 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Preserve Mailbox
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_PRESERVE_MAILBOX_INSTALL_H_
+#define _OPTION_PRESERVE_MAILBOX_INSTALL_H_
+
+#include "PreserveMailbox.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_PRESERVE_MAILBOX_FEAT
+#define F15_PRESERVE_MAILBOX_SUPPORT
+
+
+#endif // _OPTION_PRESERVE_MAILBOX_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionPsiInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionPsiInstall.h
new file mode 100644
index 0000000..8e89107
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionPsiInstall.h
@@ -0,0 +1,103 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Power Status Indicator (PSI).
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_PSI_INSTALL_H_
+#define _OPTION_PSI_INSTALL_H_
+
+#include "cpuPsi.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_CPU_PSI_FEAT
+#define F15_TN_PSI_SUPPORT
+#define F16_KB_PSI_SUPPORT
+
+#if OPTION_CPU_PSI == TRUE
+ #if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_RESUME == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ // Family 15h
+ #ifdef OPTION_FAMILY15H
+ #if OPTION_FAMILY15H == TRUE
+ #if OPTION_FAMILY15H_TN == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeaturePsi;
+ #undef OPTION_CPU_PSI_FEAT
+ #define OPTION_CPU_PSI_FEAT &CpuFeaturePsi,
+ extern CONST PSI_FAMILY_SERVICES ROMDATA F15TnPsiSupport;
+ #undef F15_TN_PSI_SUPPORT
+ #define F15_TN_PSI_SUPPORT {AMD_FAMILY_15_TN, &F15TnPsiSupport},
+ #endif
+ #endif
+ #endif
+
+ // Family 16h
+ #ifdef OPTION_FAMILY16H
+ #if OPTION_FAMILY16H == TRUE
+ #if OPTION_FAMILY16H_KB == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeaturePsi;
+ #undef OPTION_CPU_PSI_FEAT
+ #define OPTION_CPU_PSI_FEAT &CpuFeaturePsi,
+ extern CONST PSI_FAMILY_SERVICES ROMDATA F16KbPsiSupport;
+ #undef F16_KB_PSI_SUPPORT
+ #define F16_KB_PSI_SUPPORT {AMD_FAMILY_16_KB, &F16KbPsiSupport},
+ #endif
+ #endif
+ #endif
+
+ #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA PsiFamilyServiceArray[] =
+{
+ F15_TN_PSI_SUPPORT
+ F16_KB_PSI_SUPPORT
+ {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA PsiFamilyServiceTable =
+{
+ (sizeof (PsiFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &PsiFamilyServiceArray[0]
+};
+
+#endif // _OPTION_PSI_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionPstate.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionPstate.h
new file mode 100644
index 0000000..683af0a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionPstate.h
@@ -0,0 +1,117 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD ACPI PState option API.
+ *
+ * Contains structures and values used to control the PStates option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_PSTATE_H_
+#define _OPTION_PSTATE_H_
+
+#include "cpuPstateTables.h"
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef AGESA_STATUS OPTION_SSDT_FEATURE (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT VOID **AcpiPstatePtr
+ );
+
+typedef UINT32 OPTION_ACPI_FEATURE (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PSTATE_LEVELING *PStateLevelingBuffer,
+ IN OUT VOID **AcpiPStatePtr,
+ IN UINT8 LocalApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef AGESA_STATUS OPTION_PSTATE_GATHER (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr
+ );
+
+typedef AGESA_STATUS OPTION_PSTATE_LEVELING (
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#define PSTATE_STRUCT_VERSION 0x01
+
+/// Indirection vectors for POST/PEI PState code
+typedef struct {
+ UINT16 OptPstateVersion; ///< revision of this structure
+ OPTION_PSTATE_GATHER *PstateGather; ///< vector for data gathering routine
+ OPTION_PSTATE_LEVELING *PstateLeveling; ///< vector for leveling routine
+} OPTION_PSTATE_POST_CONFIGURATION;
+
+/// Indirection vectors for LATE/DXE PState code
+typedef struct {
+ UINT16 OptPstateVersion; ///< revision of this structure
+ OPTION_SSDT_FEATURE *SsdtFeature; ///< vector for routine to generate SSDT
+ OPTION_ACPI_FEATURE *PstateFeature; ///< vector for routine to generate ACPI PState Objects
+ OPTION_ACPI_FEATURE *CstateFeature; ///< vector for routine to generate ACPI CState Objects
+ BOOLEAN CfgPstatePpc; ///< boolean for creating _PPC method
+ BOOLEAN CfgPstatePct; ///< boolean for creating _PCT method
+ BOOLEAN CfgPstatePsd; ///< boolean for creating _PSD method
+ BOOLEAN CfgPstatePss; ///< boolean for creating _PSS method
+ BOOLEAN CfgPstateXpss; ///< boolean for creating _XPSS method
+ UINT8 OemIdString[6]; ///< Configurable OEM Id
+ UINT8 OemTableIdString[8]; ///< Configurable OEM Table Id
+} OPTION_PSTATE_LATE_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _OPTION_PSTATE_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionPstateHpcModeInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionPstateHpcModeInstall.h
new file mode 100644
index 0000000..58699e6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionPstateHpcModeInstall.h
@@ -0,0 +1,57 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: Pstate HPC mode.
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_PSTATE_HPC_MODE_INSTALL_H_
+#define _OPTION_PSTATE_HPC_MODE_INSTALL_H_
+
+#include "cpuPstateHpcMode.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_CPU_PSTATE_HPC_MODE_FEAT
+#define F15_PSTATE_HPC_MODE_SUPPORT
+
+
+#endif // _OPTION_PSTATE_HPC_MODE_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionPstateInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionPstateInstall.h
new file mode 100644
index 0000000..a3c5fa3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionPstateInstall.h
@@ -0,0 +1,230 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: PState
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_PSTATE_INSTALL_H_
+#define _OPTION_PSTATE_INSTALL_H_
+
+#include "cpuPstateTables.h"
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+
+#define F15_TN_PSTATE_SERVICE_SUPPORT
+#define F16_KB_PSTATE_SERVICE_SUPPORT
+
+#if ((AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE))
+ //
+ //Define Pstate CPU Family service
+ //
+ #ifdef OPTION_FAMILY15H
+ #if OPTION_FAMILY15H == TRUE
+ #ifdef OPTION_FAMILY15H_TN
+ #if OPTION_FAMILY15H_TN == TRUE
+ extern CONST PSTATE_CPU_FAMILY_SERVICES ROMDATA F15TnPstateServices;
+ #undef F15_TN_PSTATE_SERVICE_SUPPORT
+ #define F15_TN_PSTATE_SERVICE_SUPPORT {AMD_FAMILY_15_TN, &F15TnPstateServices},
+ #endif
+ #endif
+ #endif
+ #endif
+
+ #ifdef OPTION_FAMILY16H
+ #if OPTION_FAMILY16H == TRUE
+ #ifdef OPTION_FAMILY16H_KB
+ #if OPTION_FAMILY16H_KB == TRUE
+ extern CONST PSTATE_CPU_FAMILY_SERVICES ROMDATA F16KbPstateServices;
+ #undef F16_KB_PSTATE_SERVICE_SUPPORT
+ #define F16_KB_PSTATE_SERVICE_SUPPORT {AMD_FAMILY_16_KB, &F16KbPstateServices},
+ #endif
+ #endif
+ #endif
+ #endif
+ //
+ //Define ACPI Pstate objects.
+ //
+ #ifndef OPTION_ACPI_PSTATES
+ #error BLDOPT: Option not defined: "OPTION_ACPI_PSTATES"
+ #endif
+ #if (OPTION_ACPI_PSTATES == TRUE)
+ OPTION_SSDT_FEATURE GenerateSsdt;
+ #define USER_SSDT_MAIN GenerateSsdt
+ #ifndef OPTION_MULTISOCKET
+ #error BLDOPT: Option not defined: "OPTION_MULTISOCKET"
+ #endif
+
+ OPTION_ACPI_FEATURE CreatePStateAcpiTables;
+ OPTION_PSTATE_GATHER PStateGatherMain;
+ #if ((OPTION_MULTISOCKET == TRUE) && (AGESA_ENTRY_INIT_POST == TRUE))
+ OPTION_PSTATE_LEVELING PStateLevelingMain;
+ #define USER_PSTATE_OPTION_LEVEL PStateLevelingMain
+ #else
+ OPTION_PSTATE_LEVELING PStateLevelingStub;
+ #define USER_PSTATE_OPTION_LEVEL PStateLevelingStub
+ #endif
+ #if AGESA_ENTRY_INIT_LATE == TRUE
+ #define USER_PSTATE_OPTION_MAIN CreatePStateAcpiTables
+ #else
+ OPTION_ACPI_FEATURE CreateAcpiTablesStub;
+ #define USER_PSTATE_OPTION_MAIN CreateAcpiTablesStub
+ #endif
+ #if AGESA_ENTRY_INIT_POST == TRUE
+ #define USER_PSTATE_OPTION_GATHER PStateGatherMain
+ #else
+ OPTION_PSTATE_GATHER PStateGatherStub;
+ #define USER_PSTATE_OPTION_GATHER PStateGatherStub
+ #endif
+ #if CFG_ACPI_PSTATES_PPC == TRUE
+ #define USER_PSTATE_CFG_PPC TRUE
+ #else
+ #define USER_PSTATE_CFG_PPC FALSE
+ #endif
+ #if CFG_ACPI_PSTATES_PCT == TRUE
+ #define USER_PSTATE_CFG_PCT TRUE
+ #else
+ #define USER_PSTATE_CFG_PCT FALSE
+ #endif
+ #if CFG_ACPI_PSTATES_PSD == TRUE
+ #define USER_PSTATE_CFG_PSD TRUE
+ #else
+ #define USER_PSTATE_CFG_PSD FALSE
+ #endif
+ #if CFG_ACPI_PSTATES_PSS == TRUE
+ #define USER_PSTATE_CFG_PSS TRUE
+ #else
+ #define USER_PSTATE_CFG_PSS FALSE
+ #endif
+ #if CFG_ACPI_PSTATES_XPSS == TRUE
+ #define USER_PSTATE_CFG_XPSS TRUE
+ #else
+ #define USER_PSTATE_CFG_XPSS FALSE
+ #endif
+
+ #if OPTION_IO_CSTATE == TRUE
+ OPTION_ACPI_FEATURE CreateCStateAcpiTables;
+ #define USER_CSTATE_OPTION_MAIN CreateCStateAcpiTables
+ #else
+ OPTION_ACPI_FEATURE CreateAcpiTablesStub;
+ #define USER_CSTATE_OPTION_MAIN CreateAcpiTablesStub
+ #endif
+ #else
+ OPTION_SSDT_FEATURE GenerateSsdtStub;
+ OPTION_ACPI_FEATURE CreateAcpiTablesStub;
+ OPTION_PSTATE_GATHER PStateGatherStub;
+ OPTION_PSTATE_LEVELING PStateLevelingStub;
+ #define USER_SSDT_MAIN GenerateSsdtStub
+ #define USER_PSTATE_OPTION_MAIN CreateAcpiTablesStub
+ #define USER_CSTATE_OPTION_MAIN CreateAcpiTablesStub
+ #define USER_PSTATE_OPTION_GATHER PStateGatherStub
+ #define USER_PSTATE_OPTION_LEVEL PStateLevelingStub
+ #define USER_PSTATE_CFG_PPC FALSE
+ #define USER_PSTATE_CFG_PCT FALSE
+ #define USER_PSTATE_CFG_PSD FALSE
+ #define USER_PSTATE_CFG_PSS FALSE
+ #define USER_PSTATE_CFG_XPSS FALSE
+
+ // If ACPI Objects are disabled for PStates, we still need to check
+ // whether ACPI Objects are enabled for CStates
+ #if OPTION_IO_CSTATE == TRUE
+ OPTION_SSDT_FEATURE GenerateSsdt;
+ OPTION_PSTATE_GATHER PStateGatherMain;
+ OPTION_ACPI_FEATURE CreateCStateAcpiTables;
+ #undef USER_SSDT_MAIN
+ #define USER_SSDT_MAIN GenerateSsdt
+ #undef USER_PSTATE_OPTION_GATHER
+ #define USER_PSTATE_OPTION_GATHER PStateGatherMain
+ #undef USER_CSTATE_OPTION_MAIN
+ #define USER_CSTATE_OPTION_MAIN CreateCStateAcpiTables
+ #endif
+ #endif
+#else
+ OPTION_SSDT_FEATURE GenerateSsdtStub;
+ OPTION_ACPI_FEATURE CreateAcpiTablesStub;
+ OPTION_PSTATE_GATHER PStateGatherStub;
+ OPTION_PSTATE_LEVELING PStateLevelingStub;
+ #define USER_SSDT_MAIN GenerateSsdtStub
+ #define USER_PSTATE_OPTION_MAIN CreateAcpiTablesStub
+ #define USER_CSTATE_OPTION_MAIN CreateAcpiTablesStub
+ #define USER_PSTATE_OPTION_GATHER PStateGatherStub
+ #define USER_PSTATE_OPTION_LEVEL PStateLevelingStub
+ #define USER_PSTATE_CFG_PPC FALSE
+ #define USER_PSTATE_CFG_PCT FALSE
+ #define USER_PSTATE_CFG_PSD FALSE
+ #define USER_PSTATE_CFG_PSS FALSE
+ #define USER_PSTATE_CFG_XPSS FALSE
+#endif
+
+/* Declare the instance of the PSTATE option configuration structure */
+OPTION_PSTATE_POST_CONFIGURATION OptionPstatePostConfiguration = {
+ PSTATE_STRUCT_VERSION,
+ USER_PSTATE_OPTION_GATHER,
+ USER_PSTATE_OPTION_LEVEL
+};
+
+OPTION_PSTATE_LATE_CONFIGURATION OptionPstateLateConfiguration = {
+ PSTATE_STRUCT_VERSION,
+ USER_SSDT_MAIN,
+ USER_PSTATE_OPTION_MAIN,
+ USER_CSTATE_OPTION_MAIN,
+ USER_PSTATE_CFG_PPC,
+ USER_PSTATE_CFG_PCT,
+ USER_PSTATE_CFG_PSD,
+ USER_PSTATE_CFG_PSS,
+ USER_PSTATE_CFG_XPSS,
+ {CFG_ACPI_SET_OEM_ID},
+ {CFG_ACPI_SET_OEM_TABLE_ID}
+};
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA PstateCpuFamilyServiceArray[] =
+{
+ F15_TN_PSTATE_SERVICE_SUPPORT
+ F16_KB_PSTATE_SERVICE_SUPPORT
+ {0, NULL}
+};
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA PstateFamilyServiceTable =
+{
+ (sizeof (PstateCpuFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &PstateCpuFamilyServiceArray[0]
+};
+#endif // _OPTION_PSTATE_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionS3ScriptInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionS3ScriptInstall.h
new file mode 100644
index 0000000..d36004f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionS3ScriptInstall.h
@@ -0,0 +1,91 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: S3SCRIPT
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_S3SCRIPT_INSTALL_H_
+#define _OPTION_S3SCRIPT_INSTALL_H_
+
+#include "S3SaveState.h"
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#ifndef OPTION_S3SCRIPT
+ #define OPTION_S3SCRIPT FALSE //if not define assume PI not use script
+#endif
+
+#if (AGESA_ENTRY_INIT_LATE == TRUE) || (AGESA_ENTRY_INIT_ENV == TRUE) || (AGESA_ENTRY_INIT_MID == TRUE)
+ #if OPTION_S3SCRIPT == TRUE
+ #define P_S3_SCRIPT_INIT S3ScriptInitState
+ #endif
+#endif
+
+#if AGESA_ENTRY_INIT_LATE_RESTORE == TRUE
+ #if OPTION_S3SCRIPT == TRUE
+ #define P_S3_SCRIPT_RESTORE S3ScriptRestoreState
+ #endif
+#endif
+
+#ifndef P_S3_SCRIPT_INIT
+ #define P_S3_SCRIPT_INIT S3ScriptInitStateStub
+#endif
+
+#ifndef P_S3_SCRIPT_RESTORE
+ #define P_S3_SCRIPT_RESTORE S3ScriptInitStateStub
+ #undef GNB_S3_DISPATCH_FUNCTION_TABLE
+#endif
+
+#ifndef GNB_S3_DISPATCH_FUNCTION_TABLE
+ #define GNB_S3_DISPATCH_FUNCTION_TABLE
+#endif
+
+/* Declare the instance of the S3SCRIPT option configuration structure */
+S3_SCRIPT_CONFIGURATION OptionS3ScriptConfiguration = {
+ P_S3_SCRIPT_INIT,
+ P_S3_SCRIPT_RESTORE
+};
+
+S3_DISPATCH_FUNCTION_ENTRY S3DispatchFunctionTable [] = {
+ GNB_S3_DISPATCH_FUNCTION_TABLE
+ {0, NULL}
+};
+#endif // _OPTION_S3SCRIPT_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionSlit.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionSlit.h
new file mode 100644
index 0000000..8ee229a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionSlit.h
@@ -0,0 +1,98 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD SLIT option API.
+ *
+ * Contains structures and values used to control the SLIT option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_SLIT_H_
+#define _OPTION_SLIT_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Create the ACPI System Locality Distance Information Table.
+ *
+ */
+typedef AGESA_STATUS OPTION_SLIT_FEATURE (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT VOID **SlitPtr
+ );
+
+/**
+ * Clean up DRAM used during SLIT creation.
+ *
+ */
+typedef AGESA_STATUS OPTION_SLIT_RELEASE_BUFFER (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#define SLIT_STRUCT_VERSION 0x01
+
+/// The Option Configuration of SLIT
+typedef struct {
+ UINT16 OptSlitVersion; ///< The version number of SLIT
+ OPTION_SLIT_FEATURE *SlitFeature; ///< The Option Feature of SLIT
+ OPTION_SLIT_RELEASE_BUFFER *SlitReleaseBuffer; ///< Release buffer
+ UINT8 OemIdString[6]; ///< Configurable OEM Id
+ UINT8 OemTableIdString[8]; ///< Configurable OEM Table Id
+} OPTION_SLIT_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif // _OPTION_SLIT_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionSlitInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionSlitInstall.h
new file mode 100644
index 0000000..2e42384
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionSlitInstall.h
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: SLIT
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_SLIT_INSTALL_H_
+#define _OPTION_SLIT_INSTALL_H_
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#if AGESA_ENTRY_INIT_LATE == TRUE
+ #ifndef OPTION_SLIT
+ #error BLDOPT: Option not defined: "OPTION_SLIT"
+ #endif
+ #if OPTION_SLIT == TRUE
+ OPTION_SLIT_FEATURE GetAcpiSlitMain;
+ OPTION_SLIT_RELEASE_BUFFER ReleaseSlitBuffer;
+ #define USER_SLIT_OPTION GetAcpiSlitMain
+ #define USER_SLIT_RELEASE_BUFFER ReleaseSlitBuffer
+ #else
+ OPTION_SLIT_FEATURE GetAcpiSlitStub;
+ OPTION_SLIT_RELEASE_BUFFER ReleaseSlitBufferStub;
+ #define USER_SLIT_OPTION GetAcpiSlitStub
+ #define USER_SLIT_RELEASE_BUFFER ReleaseSlitBufferStub
+ #endif
+#else
+ OPTION_SLIT_FEATURE GetAcpiSlitStub;
+ OPTION_SLIT_RELEASE_BUFFER ReleaseSlitBufferStub;
+ #define USER_SLIT_OPTION GetAcpiSlitStub
+ #define USER_SLIT_RELEASE_BUFFER ReleaseSlitBufferStub
+#endif
+/* Declare the instance of the SLIT option configuration structure */
+OPTION_SLIT_CONFIGURATION OptionSlitConfiguration = {
+ SLIT_STRUCT_VERSION,
+ USER_SLIT_OPTION,
+ USER_SLIT_RELEASE_BUFFER,
+ {CFG_ACPI_SET_OEM_ID},
+ {CFG_ACPI_SET_OEM_TABLE_ID}
+};
+
+#endif // _OPTION_SLIT_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionSrat.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionSrat.h
new file mode 100644
index 0000000..4bce6a4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionSrat.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD SRAT option API.
+ *
+ * Contains structures and values used to control the SRAT option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_SRAT_H_
+#define _OPTION_SRAT_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef AGESA_STATUS OPTION_SRAT_FEATURE (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **SratPtr
+ );
+
+#define SRAT_STRUCT_VERSION 0x01
+
+/// The Option Configuration of SRAT
+typedef struct {
+ UINT16 OptSratVersion; ///< The version number of SRAT
+ OPTION_SRAT_FEATURE *SratFeature; ///< The Option Feature of SRAT
+ UINT8 OemIdString[6]; ///< Configurable OEM Id
+ UINT8 OemTableIdString[8]; ///< Configurable OEM Table Id
+} OPTION_SRAT_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif // _OPTION_SRAT_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionSratInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionSratInstall.h
new file mode 100644
index 0000000..0e3fb29
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionSratInstall.h
@@ -0,0 +1,75 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: SRAT
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_SRAT_INSTALL_H_
+#define _OPTION_SRAT_INSTALL_H_
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#if AGESA_ENTRY_INIT_LATE == TRUE
+ #ifndef OPTION_SRAT
+ #error BLDOPT: Option not defined: "OPTION_SRAT"
+ #endif
+ #if OPTION_SRAT == TRUE
+ OPTION_SRAT_FEATURE GetAcpiSratMain;
+ #define USER_SRAT_OPTION GetAcpiSratMain
+ #else
+ OPTION_SRAT_FEATURE GetAcpiSratStub;
+ #define USER_SRAT_OPTION GetAcpiSratStub
+ #endif
+#else
+ OPTION_SRAT_FEATURE GetAcpiSratStub;
+ #define USER_SRAT_OPTION GetAcpiSratStub
+#endif
+
+/* Declare the instance of the WHEA option configuration structure */
+OPTION_SRAT_CONFIGURATION OptionSratConfiguration = {
+ SRAT_STRUCT_VERSION,
+ USER_SRAT_OPTION,
+ {CFG_ACPI_SET_OEM_ID},
+ {CFG_ACPI_SET_OEM_TABLE_ID}
+};
+
+#endif // _OPTION_WHEA_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionTdpLimitingInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionTdpLimitingInstall.h
new file mode 100644
index 0000000..843bd85
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionTdpLimitingInstall.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: TDP Limiting.
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_TDP_LIMITING_INSTALL_H_
+#define _OPTION_TDP_LIMITING_INSTALL_H_
+
+#include "cpuTdpLimiting.h"
+
+/* This option is designed to be included into the CPU features install
+ * file. The CPU features install file will define the options status.
+ * Check to validate the definition
+ */
+#define OPTION_TDP_LIMIT_FEAT
+#define F15_TDP_LIMIT_SUPPORT
+
+#if OPTION_CPU_TDP_LIMITING == TRUE
+ #if (AGESA_ENTRY_INIT_EARLY == TRUE)
+ // Family 15h
+ #ifdef OPTION_FAMILY15H
+ #if OPTION_FAMILY15H == TRUE
+ extern CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureTdpLimit;
+ #undef OPTION_TDP_LIMIT_FEAT
+ #define OPTION_TDP_LIMIT_FEAT &CpuFeatureTdpLimit,
+ extern CONST TDP_LIMIT_FAMILY_SERVICES ROMDATA F15TdpLimitSupport;
+ #undef F15_TDP_LIMIT_SUPPORT
+ #define F15_TDP_LIMIT_SUPPORT {AMD_FAMILY_15, &F15TdpLimitSupport},
+ #endif
+ #endif
+ #endif
+#endif
+
+CONST CPU_SPECIFIC_SERVICES_XLAT ROMDATA TdpLimitFamilyServiceArray[] =
+{
+ F15_TDP_LIMIT_SUPPORT
+ {0, NULL}
+};
+
+CONST CPU_FAMILY_SUPPORT_TABLE ROMDATA TdpLimitFamilyServiceTable =
+{
+ (sizeof (TdpLimitFamilyServiceArray) / sizeof (CPU_SPECIFIC_SERVICES_XLAT)),
+ &TdpLimitFamilyServiceArray[0]
+};
+
+#endif // _OPTION_TDP_LIMITING_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionWhea.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionWhea.h
new file mode 100644
index 0000000..7f5d0d8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionWhea.h
@@ -0,0 +1,83 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD WHEA option API.
+ *
+ * Contains structures and values used to control the WHEA option code.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_WHEA_H_
+#define _OPTION_WHEA_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef AGESA_STATUS OPTION_WHEA_FEATURE (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **WheaMcePtr,
+ IN OUT VOID **WheaCmcPtr
+ );
+
+#define WHEA_STRUCT_VERSION 0x01
+
+/// The Option Configuration of WHEA
+typedef struct {
+ UINT16 OptWheaVersion; ///< The version number of WHEA
+ OPTION_WHEA_FEATURE *WheaFeature; ///< The Option Feature of WHEA
+} OPTION_WHEA_CONFIGURATION;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#endif // _OPTION_WHEA_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionWheaInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionWheaInstall.h
new file mode 100644
index 0000000..afbd325
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionWheaInstall.h
@@ -0,0 +1,74 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build option: WHEA
+ *
+ * Contains AMD AGESA install macros and test conditions. Output is the
+ * defaults tables reflecting the User's build options selection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Options
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _OPTION_WHEA_INSTALL_H_
+#define _OPTION_WHEA_INSTALL_H_
+
+/* This option is designed to be included into the platform solution install
+ * file. The platform solution install file will define the options status.
+ * Check to validate the definition
+ */
+#if AGESA_ENTRY_INIT_LATE == TRUE
+ #ifndef OPTION_WHEA
+ #error BLDOPT: Option not defined: "OPTION_WHEA"
+ #endif
+ #if OPTION_WHEA == TRUE
+ OPTION_WHEA_FEATURE GetAcpiWheaMain;
+ #define USER_WHEA_OPTION GetAcpiWheaMain
+ #else
+ OPTION_WHEA_FEATURE GetAcpiWheaStub;
+ #define USER_WHEA_OPTION GetAcpiWheaStub
+ #endif
+
+#else
+ OPTION_WHEA_FEATURE GetAcpiWheaStub;
+ #define USER_WHEA_OPTION GetAcpiWheaStub
+#endif
+
+/* Declare the instance of the WHEA option configuration structure */
+OPTION_WHEA_CONFIGURATION OptionWheaConfiguration = {
+ WHEA_STRUCT_VERSION,
+ USER_WHEA_OPTION
+};
+
+#endif // _OPTION_WHEA_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/Options.h b/src/vendorcode/amd/agesa/f16kb/Include/Options.h
new file mode 100644
index 0000000..19e161c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/Options.h
@@ -0,0 +1,68 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AGESA options structures
+ *
+ * Contains options control structures for the AGESA build options
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+
+#ifndef _OPTIONS_H_
+#define _OPTIONS_H_
+
+/**
+ * Provide topology limits for loops and runtime, based on supported families.
+ */
+typedef struct {
+ UINT32 PlatformNumberOfSockets; ///< The limit to the number of processors based on
+ ///< supported families and other build options.
+ UINT32 PlatformNumberOfModules; ///< The limit to the number of modules in a processor, based
+ ///< on supported families.
+} OPTIONS_CONFIG_TOPOLOGY;
+
+/**
+ * Dispatch Table.
+ *
+ * The push high dispatcher uses this table to find what entries are currently in the build image.
+ */
+typedef struct {
+ UINT32 FunctionId; ///< The function id specified.
+ IMAGE_ENTRY EntryPoint; ///< The corresponding entry point to call.
+} DISPATCH_TABLE;
+
+
+#endif // _OPTIONS_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/OptionsHt.h b/src/vendorcode/amd/agesa/f16kb/Include/OptionsHt.h
new file mode 100644
index 0000000..51f056d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/OptionsHt.h
@@ -0,0 +1,109 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD HyperTransport option API.
+ *
+ * Contains option pre-compile logic. This file is used by the options
+ * installer and internally by the HT code initializers.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _OPTION_HT_H_
+#define _OPTION_HT_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Provide HT build option results
+ */
+typedef struct {
+ CONST BOOLEAN IsUsingRecoveryHt; ///< Manual BUID Swap List processing should assume that HT Recovery was used.
+ CONST BOOLEAN IsSetHtCrcFlood; ///< Enable setting of HT CRC Flood.
+ ///< Build-time only customizable - @BldCfgItem{BLDCFG_SET_HTCRC_SYNC_FLOOD}
+ CONST BOOLEAN IsUsingUnitIdClumping; ///< Enable automatically HT Spec compliant Unit Id Clumping.
+ ///< Build-time only customizable - @BldCfgItem{BLDCFG_USE_UNIT_ID_CLUMPING}
+ CONST AMD_HT_INTERFACE *HtOptionPlatformDefaults; ///< A set of build time options for HT constructor.
+ CONST VOID *HtOptionInternalInterface; ///< Use this internal interface initializer.
+ CONST VOID *HtOptionInternalFeatures; ///< Use this internal feature set initializer.
+ CONST VOID *HtOptionFamilyNorthbridgeList; ///< Use this list of northbridge initializers.
+ CONST UINT8 *CONST *HtOptionBuiltinTopologies; ///< Use this list of built-in topologies.
+} OPTION_HT_CONFIGURATION;
+
+typedef AGESA_STATUS
+F_OPTION_HT_INIT_RESET (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_HT_RESET_INTERFACE *AmdHtResetInterface
+ );
+
+typedef F_OPTION_HT_INIT_RESET *PF_OPTION_HT_INIT_RESET;
+
+typedef AGESA_STATUS
+F_OPTION_HT_RESET_CONSTRUCTOR (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_HT_RESET_INTERFACE *AmdHtResetInterface
+ );
+
+typedef F_OPTION_HT_RESET_CONSTRUCTOR *PF_OPTION_HT_RESET_CONSTRUCTOR;
+
+/**
+ * Provide HT reset initialization build option results
+ */
+typedef struct {
+ PF_OPTION_HT_INIT_RESET HtInitReset; ///< Method: HT reset initialization.
+ PF_OPTION_HT_RESET_CONSTRUCTOR HtResetConstructor; ///< Method: HT reset initialization.
+} OPTION_HT_INIT_RESET;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _OPTION_HT_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/PlatformInstall.h b/src/vendorcode/amd/agesa/f16kb/Include/PlatformInstall.h
new file mode 100644
index 0000000..136b0f4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/PlatformInstall.h
@@ -0,0 +1,2361 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Install of build options for a combination of package type, processor, and features.
+ *
+ * This file generates the defaults tables for the all platform solution
+ * combinations. The documented build options are imported from a user
+ * controlled file for processing.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 85818 $ @e \$Date: 2013-01-11 17:04:21 -0600 (Fri, 11 Jan 2013) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+/*****************************************************************************
+ *
+ * Start processing the user options: First, set default settings
+ *
+ ****************************************************************************/
+
+/* Available options for image builds.
+ *
+ * As part of the image build for each image, define the options below to select the
+ * AGESA entry points included in that image. Turn these on in your option c file, not
+ * here.
+ */
+// #define AGESA_ENTRY_INIT_RESET TRUE
+// #define AGESA_ENTRY_INIT_RECOVERY TRUE
+// #define AGESA_ENTRY_INIT_EARLY TRUE
+// #define AGESA_ENTRY_INIT_POST TRUE
+// #define AGESA_ENTRY_INIT_ENV TRUE
+// #define AGESA_ENTRY_INIT_MID TRUE
+// #define AGESA_ENTRY_INIT_LATE TRUE
+// #define AGESA_ENTRY_INIT_S3SAVE TRUE
+// #define AGESA_ENTRY_INIT_RESUME TRUE
+// #define AGESA_ENTRY_INIT_LATE_RESTORE TRUE
+// #define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE
+
+/* Defaults for private/internal build control settings */
+/* Available options for image builds.
+ *
+ * As part of the image build for each image, define the options below to select the
+ * AGESA entry points included in that image.
+ */
+
+VOLATILE AMD_MODULE_HEADER mCpuModuleID = {
+ //ModuleHeaderSignature
+ // Remove 'DOM$' as temp solution before update BinUtil.exe ,
+ Int32FromChar ('0', '0', '0', '0'),
+ //ModuleIdentifier[8]
+ AGESA_ID,
+ //ModuleVersion[12]
+ AGESA_VERSION_STRING,
+ //ModuleDispatcher
+ NULL,//(VOID *)(UINT64)((MODULE_ENTRY)AmdAgesaDispatcher),
+ //NextBlock
+ NULL
+};
+
+/* Process user desired AGESA entry points */
+#ifndef AGESA_ENTRY_INIT_RESET
+ #define AGESA_ENTRY_INIT_RESET FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_RECOVERY
+ #define AGESA_ENTRY_INIT_RECOVERY FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_EARLY
+ #define AGESA_ENTRY_INIT_EARLY FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_POST
+ #define AGESA_ENTRY_INIT_POST FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_ENV
+ #define AGESA_ENTRY_INIT_ENV FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_MID
+ #define AGESA_ENTRY_INIT_MID FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_LATE
+ #define AGESA_ENTRY_INIT_LATE FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_S3SAVE
+ #define AGESA_ENTRY_INIT_S3SAVE FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_RESUME
+ #define AGESA_ENTRY_INIT_RESUME FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_LATE_RESTORE
+ #define AGESA_ENTRY_INIT_LATE_RESTORE FALSE
+#endif
+
+#ifndef AGESA_ENTRY_INIT_GENERAL_SERVICES
+ #define AGESA_ENTRY_INIT_GENERAL_SERVICES FALSE
+#endif
+
+/* Default the late AP entry point to off. It can be enabled
+ by any family that may need the late AP functionality, or
+ by any feature code that may need it. The IBVs no longer
+ have control over this entry point. */
+#ifdef AGESA_ENTRY_LATE_RUN_AP_TASK
+ #undef AGESA_ENTRY_LATE_RUN_AP_TASK
+#endif
+#define AGESA_ENTRY_LATE_RUN_AP_TASK FALSE
+
+
+
+/* Process solution defined socket / family installations
+ *
+ * As part of the release package for each image, define the options below to select the
+ * AGESA processor support included in that image.
+ */
+
+/* Default sockets to off */
+#define OPTION_FT3_SOCKET_SUPPORT FALSE
+
+/* Default families to off */
+#define OPTION_FAMILY15H_MODEL_1x FALSE
+#define OPTION_FAMILY16H_MODEL_0x FALSE
+
+
+/* Enable the appropriate socket support */
+
+#ifdef INSTALL_FT3_SOCKET_SUPPORT
+ #if INSTALL_FT3_SOCKET_SUPPORT == TRUE
+ #undef OPTION_FT3_SOCKET_SUPPORT
+ #define OPTION_FT3_SOCKET_SUPPORT TRUE
+ #endif
+#endif
+
+
+
+// F16_0x is supported in FT3
+#ifdef INSTALL_FAMILY_16_MODEL_0x_SUPPORT
+ #if INSTALL_FAMILY_16_MODEL_0x_SUPPORT == TRUE
+ #undef OPTION_FAMILY16H
+ #define OPTION_FAMILY16H TRUE
+ #undef OPTION_FAMILY16H_MODEL_0x
+ #define OPTION_FAMILY16H_MODEL_0x TRUE
+ #endif
+#endif
+
+/* Turn off families not required by socket designations */
+#if (OPTION_FAMILY15H_MODEL_1x == FALSE)
+ #undef OPTION_FAMILY15H
+ #define OPTION_FAMILY15H FALSE
+#endif
+
+#if (OPTION_FAMILY16H_MODEL_0x == TRUE)
+ #if (OPTION_FT3_SOCKET_SUPPORT == FALSE)
+ #undef OPTION_FAMILY16H_MODEL_0x
+ #define OPTION_FAMILY16H_MODEL_0x FALSE
+ #endif
+#endif
+
+
+#if (OPTION_FAMILY16H_MODEL_0x == FALSE)
+ #undef OPTION_FAMILY16H
+ #define OPTION_FAMILY16H FALSE
+#endif
+
+
+#if (OPTION_FT3_SOCKET_SUPPORT == TRUE)
+ #if (OPTION_FAMILY16H_MODEL_0x == FALSE) && (OPTION_FAMILY16H_MODEL_3x == FALSE)
+ #error No FT3 supported families included in the build
+ #endif
+#endif
+
+
+/* Process AGESA private data
+ *
+ * Turn on appropriate CPU models and memory controllers,
+ * as well as some other memory controls.
+ */
+
+/* Default all models to off */
+#define OPTION_FAMILY15H_TN FALSE
+#define OPTION_FAMILY16H_KB FALSE
+#define OPTION_FAMILY15H_UNKNOWN FALSE
+
+/* Default all memory controllers to off */
+#define OPTION_MEMCTLR_TN FALSE
+#define OPTION_MEMCTLR_KB FALSE
+
+/* Default all memory controls to off */
+#define OPTION_HW_WRITE_LEV_TRAINING FALSE
+#define OPTION_SW_WRITE_LEV_TRAINING FALSE
+#define OPTION_CONTINOUS_PATTERN_GENERATION FALSE
+#define OPTION_HW_DQS_REC_EN_TRAINING FALSE
+#define OPTION_NON_OPT_SW_DQS_REC_EN_TRAINING FALSE
+#define OPTION_OPT_SW_DQS_REC_EN_TRAINING FALSE
+#define OPTION_NON_OPT_SW_RD_WR_POS_TRAINING FALSE
+#define OPTION_OPT_SW_RD_WR_POS_TRAINING FALSE
+#define OPTION_MAX_RD_LAT_TRAINING FALSE
+#define OPTION_HW_DRAM_INIT FALSE
+#define OPTION_SW_DRAM_INIT FALSE
+#define OPTION_S3_MEM_SUPPORT FALSE
+#define OPTION_ADDR_TO_CS_TRANSLATOR FALSE
+#define OPTION_HW_DQS_REC_EN_SEED_TRAINING FALSE
+#define OPTION_RDDQS_2D_TRAINING FALSE
+#define OPTION_PRE_MEM_INIT FALSE
+#define OPTION_POST_MEM_INIT FALSE
+
+/* Defaults for public user options */
+#define OPTION_UDIMMS FALSE
+#define OPTION_RDIMMS FALSE
+#define OPTION_SODIMMS FALSE
+#define OPTION_LRDIMMS FALSE
+#define OPTION_DDR2 FALSE
+#define OPTION_DDR3 FALSE
+#define OPTION_ECC FALSE
+#define OPTION_BANK_INTERLEAVE FALSE
+#define OPTION_DCT_INTERLEAVE FALSE
+#define OPTION_NODE_INTERLEAVE FALSE
+#define OPTION_PARALLEL_TRAINING FALSE
+#define OPTION_ONLINE_SPARE FALSE
+#define OPTION_MEM_RESTORE FALSE
+#define OPTION_DIMM_EXCLUDE FALSE
+#define OPTION_AMP FALSE
+#define OPTION_DATA_EYE FALSE
+#define OPTION_AGGRESSOR FALSE
+
+/* Default all CPU controls to off */
+#define OPTION_MULTISOCKET FALSE
+#define OPTION_CRAT FALSE
+#define OPTION_CDIT FALSE
+#define OPTION_SRAT FALSE
+#define OPTION_SLIT FALSE
+#define OPTION_HT_ASSIST FALSE
+#define OPTION_ATM_MODE FALSE
+#define OPTION_NBR_CACHE FALSE
+#define OPTION_CPU_CORELEVELING FALSE
+#define OPTION_MSG_BASED_C1E FALSE
+#define OPTION_CPU_CFOH FALSE
+#define OPTION_C6_STATE FALSE
+#define OPTION_IO_CSTATE FALSE
+#define OPTION_CPB FALSE
+#define OPTION_CPU_APM FALSE
+#define OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT FALSE
+#define OPTION_CPU_PSTATE_HPC_MODE FALSE
+#define OPTION_CPU_TDP_LIMITING FALSE
+#define OPTION_CPU_PSI FALSE
+#define OPTION_CPU_HTC FALSE
+#define OPTION_S3SCRIPT FALSE
+#define OPTION_GFX_RECOVERY FALSE
+#define OPTION_CPU_SCS FALSE
+#define OPTION_PREFETCH_MODE FALSE
+
+/* Default FCH controls to off */
+#define FCH_SUPPORT FALSE
+
+/* Enable all private controls based on socket/family enables */
+
+#if (OPTION_FT3_SOCKET_SUPPORT == TRUE)
+ #if (OPTION_FAMILY16H_MODEL_0x == TRUE)
+ #undef FCH_SUPPORT
+ #define FCH_SUPPORT TRUE
+ #undef OPTION_FAMILY16H_KB
+ #define OPTION_FAMILY16H_KB TRUE
+ #undef OPTION_MEMCTLR_KB
+ #define OPTION_MEMCTLR_KB TRUE
+ #undef OPTION_HW_WRITE_LEV_TRAINING
+ #define OPTION_HW_WRITE_LEV_TRAINING TRUE
+ #undef OPTION_CONTINOUS_PATTERN_GENERATION
+ #define OPTION_CONTINOUS_PATTERN_GENERATION TRUE
+ #undef OPTION_HW_DQS_REC_EN_TRAINING
+ #define OPTION_HW_DQS_REC_EN_TRAINING TRUE
+ #undef OPTION_HW_DQS_REC_EN_SEED_TRAINING
+ #define OPTION_HW_DQS_REC_EN_SEED_TRAINING TRUE
+ #undef OPTION_OPT_SW_RD_WR_POS_TRAINING
+ #define OPTION_OPT_SW_RD_WR_POS_TRAINING TRUE
+ #undef OPTION_RDDQS_2D_TRAINING
+ #define OPTION_RDDQS_2D_TRAINING TRUE
+ #undef OPTION_MAX_RD_LAT_TRAINING
+ #define OPTION_MAX_RD_LAT_TRAINING TRUE
+ #undef OPTION_SW_DRAM_INIT
+ #define OPTION_SW_DRAM_INIT TRUE
+ #undef OPTION_S3_MEM_SUPPORT
+ #define OPTION_S3_MEM_SUPPORT TRUE
+ #undef OPTION_GFX_RECOVERY
+ #define OPTION_GFX_RECOVERY TRUE
+ #undef OPTION_CPU_CORELEVELING
+ #define OPTION_CPU_CORELEVELING TRUE
+ #undef OPTION_C6_STATE
+ #define OPTION_C6_STATE TRUE
+ #undef OPTION_IO_CSTATE
+ #define OPTION_IO_CSTATE TRUE
+ #undef OPTION_CPU_CFOH
+ #define OPTION_CPU_CFOH TRUE
+ #undef OPTION_CPU_APM
+ #define OPTION_CPU_APM TRUE
+ #undef OPTION_CPB
+ #define OPTION_CPB TRUE
+ #undef OPTION_CPU_HTC
+ #define OPTION_CPU_HTC TRUE
+ #undef OPTION_CPU_PSI
+ #define OPTION_CPU_PSI TRUE
+ #undef OPTION_CDIT
+ #define OPTION_CDIT TRUE
+ #undef OPTION_CRAT
+ #define OPTION_CRAT TRUE
+ #undef OPTION_CPU_SCS
+ #define OPTION_CPU_SCS TRUE
+ #undef OPTION_S3SCRIPT
+ #define OPTION_S3SCRIPT TRUE
+ ///@todo
+ //#undef OPTION_PREFETCH_MODE
+ //#define OPTION_PREFETCH_MODE TRUE
+ #undef OPTION_UDIMMS
+ #define OPTION_UDIMMS TRUE
+ #undef OPTION_SODIMMS
+ #define OPTION_SODIMMS TRUE
+ #undef OPTION_DDR3
+ #define OPTION_DDR3 TRUE
+ #undef OPTION_ECC
+ #define OPTION_ECC TRUE
+ #undef OPTION_BANK_INTERLEAVE
+ #define OPTION_BANK_INTERLEAVE TRUE
+ #undef OPTION_DCT_INTERLEAVE
+ #define OPTION_DCT_INTERLEAVE TRUE
+ #undef OPTION_MEM_RESTORE
+ #define OPTION_MEM_RESTORE TRUE
+ #undef OPTION_DIMM_EXCLUDE
+ #define OPTION_DIMM_EXCLUDE TRUE
+ #endif
+#endif
+
+
+#if (OPTION_FAMILY16H_KB == TRUE)
+ #undef GNB_SUPPORT
+ #define GNB_SUPPORT TRUE
+#endif
+
+#define OPTION_ACPI_PSTATES TRUE
+#define OPTION_WHEA TRUE
+#define OPTION_DMI TRUE
+#define OPTION_EARLY_SAMPLES FALSE
+#define CFG_ACPI_PSTATES_PPC TRUE
+#define CFG_ACPI_PSTATES_PCT TRUE
+#define CFG_ACPI_PSTATES_PSD TRUE
+#define CFG_ACPI_PSTATES_PSS TRUE
+#define CFG_ACPI_PSTATES_XPSS TRUE
+#define CFG_ACPI_PSTATE_PSD_INDPX FALSE
+#define CFG_VRM_HIGH_SPEED_ENABLE FALSE
+#define CFG_VRM_NB_HIGH_SPEED_ENABLE FALSE
+#define OPTION_ALIB TRUE
+/*---------------------------------------------------------------------------
+ * Processing the options: Second, process the user's selections
+ *--------------------------------------------------------------------------*/
+#ifdef BLDOPT_REMOVE_DDR3_SUPPORT
+ #if BLDOPT_REMOVE_DDR3_SUPPORT == TRUE
+ #undef OPTION_DDR3
+ #define OPTION_DDR3 FALSE
+ #endif
+#endif
+#if ((OPTION_DDR3 == FALSE))
+ #error BLDOPT: No DIMM type support selected. BLDOPT_REMOVE_DDR3_SUPPORT must be FALSE.
+#endif
+#ifdef BLDOPT_REMOVE_MULTISOCKET_SUPPORT
+ #if BLDOPT_REMOVE_MULTISOCKET_SUPPORT == TRUE
+ #undef OPTION_MULTISOCKET
+ #define OPTION_MULTISOCKET FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_ECC_SUPPORT
+ #if BLDOPT_REMOVE_ECC_SUPPORT == TRUE
+ #undef OPTION_ECC
+ #define OPTION_ECC FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_UDIMMS_SUPPORT
+ #if BLDOPT_REMOVE_UDIMMS_SUPPORT == TRUE
+ #undef OPTION_UDIMMS
+ #define OPTION_UDIMMS FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_RDIMMS_SUPPORT
+ #if BLDOPT_REMOVE_RDIMMS_SUPPORT == TRUE
+ #undef OPTION_RDIMMS
+ #define OPTION_RDIMMS FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_SODIMMS_SUPPORT
+ #if BLDOPT_REMOVE_SODIMMS_SUPPORT == TRUE
+ #undef OPTION_SODIMMS
+ #define OPTION_SODIMMS FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_LRDIMMS_SUPPORT
+ #if BLDOPT_REMOVE_LRDIMMS_SUPPORT == TRUE
+ #undef OPTION_LRDIMMS
+ #define OPTION_LRDIMMS FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_BANK_INTERLEAVE
+ #if BLDOPT_REMOVE_BANK_INTERLEAVE == TRUE
+ #undef OPTION_BANK_INTERLEAVE
+ #define OPTION_BANK_INTERLEAVE FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_DCT_INTERLEAVE
+ #if BLDOPT_REMOVE_DCT_INTERLEAVE == TRUE
+ #undef OPTION_DCT_INTERLEAVE
+ #define OPTION_DCT_INTERLEAVE FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_NODE_INTERLEAVE
+ #if BLDOPT_REMOVE_NODE_INTERLEAVE == TRUE
+ #undef OPTION_NODE_INTERLEAVE
+ #define OPTION_NODE_INTERLEAVE FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_PARALLEL_TRAINING
+ #if BLDOPT_REMOVE_PARALLEL_TRAINING == TRUE
+ #undef OPTION_PARALLEL_TRAINING
+ #define OPTION_PARALLEL_TRAINING FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT
+ #if BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT == TRUE
+ #undef OPTION_ONLINE_SPARE
+ #define OPTION_ONLINE_SPARE FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_MEM_RESTORE_SUPPORT
+ #if BLDOPT_REMOVE_MEM_RESTORE_SUPPORT == TRUE
+ #undef OPTION_MEM_RESTORE
+ #define OPTION_MEM_RESTORE FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_HW_DQS_REC_EN_SEED_TRAINING
+ #if BLDOPT_REMOVE_HW_DQS_REC_EN_SEED_TRAINING == TRUE
+ #undef OPTION_HW_DQS_REC_EN_SEED_TRAINING
+ #define OPTION_HW_DQS_REC_EN_SEED_TRAINING FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_ACPI_PSTATES
+ #if BLDOPT_REMOVE_ACPI_PSTATES == TRUE
+ #undef OPTION_ACPI_PSTATES
+ #define OPTION_ACPI_PSTATES FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_CRAT
+ #if BLDOPT_REMOVE_CRAT == TRUE
+ #undef OPTION_CRAT
+ #define OPTION_CRAT FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_CDIT
+ #if BLDOPT_REMOVE_CDIT == TRUE
+ #undef OPTION_CDIT
+ #define OPTION_CDIT FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_SRAT
+ #if BLDOPT_REMOVE_SRAT == TRUE
+ #undef OPTION_SRAT
+ #define OPTION_SRAT FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_SLIT
+ #if BLDOPT_REMOVE_SLIT == TRUE
+ #undef OPTION_SLIT
+ #define OPTION_SLIT FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_WHEA
+ #if BLDOPT_REMOVE_WHEA == TRUE
+ #undef OPTION_WHEA
+ #define OPTION_WHEA FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_DMI
+ #if BLDOPT_REMOVE_DMI == TRUE
+ #undef OPTION_DMI
+ #define OPTION_DMI FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_ADDR_TO_CS_TRANSLATOR
+ #if BLDOPT_REMOVE_ADDR_TO_CS_TRANSLATOR == TRUE
+ #undef OPTION_ADDR_TO_CS_TRANSLATOR
+ #define OPTION_ADDR_TO_CS_TRANSLATOR FALSE
+ #endif
+#endif
+#ifdef BLDOPT_REMOVE_AMP_SUPPORT
+ #if BLDOPT_REMOVE_AMP_SUPPORT == TRUE
+ #undef OPTION_AMP
+ #define OPTION_AMP FALSE
+ #endif
+#endif
+
+#ifdef OPTION_RDDQS_2D_TRAINING
+ #if OPTION_RDDQS_2D_TRAINING == FALSE
+ #undef OPTION_DATA_EYE
+ #define OPTION_DATA_EYE FALSE
+ #else
+ #ifdef BLDOPT_REMOVE_DATA_EYE
+ #if BLDOPT_REMOVE_DATA_EYE == TRUE
+ #undef OPTION_DATA_EYE
+ #define OPTION_DATA_EYE FALSE
+ #endif
+ #endif
+ #endif
+#else
+ #undef OPTION_DATA_EYE
+ #define OPTION_DATA_EYE FALSE
+#endif
+
+#ifdef BLDOPT_REMOVE_HT_ASSIST
+ #if BLDOPT_REMOVE_HT_ASSIST == TRUE
+ #undef OPTION_HT_ASSIST
+ #define OPTION_HT_ASSIST FALSE
+ #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_ATM_MODE
+ #if BLDOPT_REMOVE_ATM_MODE == TRUE
+ #undef OPTION_ATM_MODE
+ #define OPTION_ATM_MODE FALSE
+ #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_NEIGHBOR_CACHE
+ #if BLDOPT_REMOVE_NEIGHBOR_CACHE == TRUE
+ #undef OPTION_NBR_CACHE
+ #define OPTION_NBR_CACHE FALSE
+ #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_MSG_BASED_C1E
+ #if BLDOPT_REMOVE_MSG_BASED_C1E == TRUE
+ #undef OPTION_MSG_BASED_C1E
+ #define OPTION_MSG_BASED_C1E FALSE
+ #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_C6_STATE
+ #if BLDOPT_REMOVE_C6_STATE == TRUE
+ #undef OPTION_C6_STATE
+ #define OPTION_C6_STATE FALSE
+ #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_GFX_RECOVERY
+ #if BLDOPT_REMOVE_GFX_RECOVERY == TRUE
+ #undef OPTION_GFX_RECOVERY
+ #define OPTION_GFX_RECOVERY FALSE
+ #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_HW_RDDQS_2D_TRAINING
+ #if BLDOPT_REMOVE_HW_RDDQS_2D_TRAINING == TRUE
+ #undef OPTION_RDDQS_2D_TRAINING
+ #define OPTION_RDDQS_2D_TRAINING FALSE
+ #endif
+#endif
+
+#ifdef BLDCFG_REMOVE_ACPI_PSTATES_PPC
+ #if BLDCFG_REMOVE_ACPI_PSTATES_PPC == TRUE
+ #undef CFG_ACPI_PSTATES_PPC
+ #define CFG_ACPI_PSTATES_PPC FALSE
+ #endif
+#endif
+
+#ifdef BLDCFG_REMOVE_ACPI_PSTATES_PCT
+ #if BLDCFG_REMOVE_ACPI_PSTATES_PCT == TRUE
+ #undef CFG_ACPI_PSTATES_PCT
+ #define CFG_ACPI_PSTATES_PCT FALSE
+ #endif
+#endif
+
+#ifdef BLDCFG_REMOVE_ACPI_PSTATES_PSD
+ #if BLDCFG_REMOVE_ACPI_PSTATES_PSD == TRUE
+ #undef CFG_ACPI_PSTATES_PSD
+ #define CFG_ACPI_PSTATES_PSD FALSE
+ #endif
+#endif
+
+#ifdef BLDCFG_REMOVE_ACPI_PSTATES_PSS
+ #if BLDCFG_REMOVE_ACPI_PSTATES_PSS == TRUE
+ #undef CFG_ACPI_PSTATES_PSS
+ #define CFG_ACPI_PSTATES_PSS FALSE
+ #endif
+#endif
+
+#ifdef BLDCFG_REMOVE_ACPI_PSTATES_XPSS
+ #if BLDCFG_REMOVE_ACPI_PSTATES_XPSS == TRUE
+ #undef CFG_ACPI_PSTATES_XPSS
+ #define CFG_ACPI_PSTATES_XPSS FALSE
+ #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT
+ #if BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT == TRUE
+ #undef OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT
+ #define OPTION_CPU_LOW_PWR_PSTATE_FOR_PROCHOT FALSE
+ #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_AGGRESSOR
+ #if BLDOPT_REMOVE_AGGRESSOR == TRUE
+ #undef OPTION_AGGRESSOR
+ #define OPTION_AGGRESSOR FALSE
+ #endif
+#endif
+
+#ifdef BLDCFG_PSTATE_HPC_MODE
+ #if BLDCFG_PSTATE_HPC_MODE == TRUE
+ #undef OPTION_CPU_PSTATE_HPC_MODE
+ #define OPTION_CPU_PSTATE_HPC_MODE TRUE
+ #endif
+#endif
+
+#ifdef BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT
+ #if BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT == TRUE
+ #undef CFG_ACPI_PSTATE_PSD_INDPX
+ #define CFG_ACPI_PSTATE_PSD_INDPX TRUE
+ #endif
+#endif
+
+#ifdef BLDCFG_ACPI_PSTATES_PSD_POLICY
+ #define CFG_ACPI_PSTATES_PSD_POLICY (BLDCFG_ACPI_PSTATES_PSD_POLICY)
+#else
+ #define CFG_ACPI_PSTATES_PSD_POLICY PsdPolicyProcessorDefault
+#endif
+
+#ifdef BLDCFG_VRM_HIGH_SPEED_ENABLE
+ #if BLDCFG_VRM_HIGH_SPEED_ENABLE == TRUE
+ #undef CFG_VRM_HIGH_SPEED_ENABLE
+ #define CFG_VRM_HIGH_SPEED_ENABLE TRUE
+ #endif
+#endif
+
+#ifdef BLDCFG_VRM_NB_HIGH_SPEED_ENABLE
+ #if BLDCFG_VRM_NB_HIGH_SPEED_ENABLE == TRUE
+ #undef CFG_VRM_NB_HIGH_SPEED_ENABLE
+ #define CFG_VRM_NB_HIGH_SPEED_ENABLE TRUE
+ #endif
+#endif
+
+#ifdef BLDCFG_STARTING_BUSNUM
+ #define CFG_STARTING_BUSNUM (BLDCFG_STARTING_BUSNUM)
+#else
+ #define CFG_STARTING_BUSNUM (0)
+#endif
+
+#ifdef BLDCFG_AMD_PLATFORM_TYPE
+ #define CFG_AMD_PLATFORM_TYPE BLDCFG_AMD_PLATFORM_TYPE
+#else
+ #define CFG_AMD_PLATFORM_TYPE 0
+#endif
+
+CONST UINT32 ROMDATA AmdPlatformTypeCgf = CFG_AMD_PLATFORM_TYPE;
+
+#ifdef BLDCFG_MAXIMUM_BUSNUM
+ #define CFG_MAXIMUM_BUSNUM (BLDCFG_MAXIMUM_BUSNUM)
+#else
+ #define CFG_MAXIMUM_BUSNUM (0xF8)
+#endif
+
+#ifdef BLDCFG_ALLOCATED_BUSNUM
+ #define CFG_ALLOCATED_BUSNUM (BLDCFG_ALLOCATED_BUSNUM)
+#else
+ #define CFG_ALLOCATED_BUSNUM (0x20)
+#endif
+
+#ifdef BLDCFG_BUID_SWAP_LIST
+ #define CFG_BUID_SWAP_LIST (BLDCFG_BUID_SWAP_LIST)
+#else
+ #define CFG_BUID_SWAP_LIST (NULL)
+#endif
+
+#ifdef BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST
+ #define CFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST (BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST)
+#else
+ #define CFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST (NULL)
+#endif
+
+#ifdef BLDCFG_HTFABRIC_LIMITS_LIST
+ #define CFG_HTFABRIC_LIMITS_LIST (BLDCFG_HTFABRIC_LIMITS_LIST)
+#else
+ #define CFG_HTFABRIC_LIMITS_LIST (NULL)
+#endif
+
+#ifdef BLDCFG_HTCHAIN_LIMITS_LIST
+ #define CFG_HTCHAIN_LIMITS_LIST (BLDCFG_HTCHAIN_LIMITS_LIST)
+#else
+ #define CFG_HTCHAIN_LIMITS_LIST (NULL)
+#endif
+
+#ifdef BLDCFG_BUS_NUMBERS_LIST
+ #define CFG_BUS_NUMBERS_LIST (BLDCFG_BUS_NUMBERS_LIST)
+#else
+ #define CFG_BUS_NUMBERS_LIST (NULL)
+#endif
+
+#ifdef BLDCFG_IGNORE_LINK_LIST
+ #define CFG_IGNORE_LINK_LIST (BLDCFG_IGNORE_LINK_LIST)
+#else
+ #define CFG_IGNORE_LINK_LIST (NULL)
+#endif
+
+#ifdef BLDCFG_LINK_SKIP_REGANG_LIST
+ #define CFG_LINK_SKIP_REGANG_LIST (BLDCFG_LINK_SKIP_REGANG_LIST)
+#else
+ #define CFG_LINK_SKIP_REGANG_LIST (NULL)
+#endif
+
+#ifdef BLDCFG_SET_HTCRC_SYNC_FLOOD
+ #define CFG_SET_HTCRC_SYNC_FLOOD (BLDCFG_SET_HTCRC_SYNC_FLOOD)
+#else
+ #define CFG_SET_HTCRC_SYNC_FLOOD (FALSE)
+#endif
+
+#ifdef BLDCFG_USE_UNIT_ID_CLUMPING
+ #define CFG_USE_UNIT_ID_CLUMPING (BLDCFG_USE_UNIT_ID_CLUMPING)
+#else
+ #define CFG_USE_UNIT_ID_CLUMPING (FALSE)
+#endif
+
+#ifdef BLDCFG_ADDITIONAL_TOPOLOGIES_LIST
+ #define CFG_ADDITIONAL_TOPOLOGIES_LIST (BLDCFG_ADDITIONAL_TOPOLOGIES_LIST)
+#else
+ #define CFG_ADDITIONAL_TOPOLOGIES_LIST (NULL)
+#endif
+
+#ifdef BLDCFG_USE_HT_ASSIST
+ #define CFG_USE_HT_ASSIST (BLDCFG_USE_HT_ASSIST)
+#else
+ #define CFG_USE_HT_ASSIST (TRUE)
+#endif
+
+#ifdef BLDCFG_USE_ATM_MODE
+ #define CFG_USE_ATM_MODE (BLDCFG_USE_ATM_MODE)
+#else
+ #define CFG_USE_ATM_MODE (TRUE)
+#endif
+
+#ifdef BLDCFG_USE_NEIGHBOR_CACHE
+ #define CFG_USE_NBR_CACHE (BLDCFG_USE_NEIGHBOR_CACHE)
+#else
+ #define CFG_USE_NBR_CACHE (TRUE)
+#endif
+
+#ifdef BLDCFG_PLATFORM_CONTROL_FLOW_MODE
+ #define CFG_PLATFORM_CONTROL_FLOW_MODE (BLDCFG_PLATFORM_CONTROL_FLOW_MODE)
+#else
+ #define CFG_PLATFORM_CONTROL_FLOW_MODE (Nfcm)
+#endif
+
+#ifdef BLDCFG_PERFORMANCE_HARDWARE_PREFETCHER
+ #define CFG_PERFORMANCE_HARDWARE_PREFETCHER (BLDCFG_PERFORMANCE_HARDWARE_PREFETCHER)
+#else
+ #define CFG_PERFORMANCE_HARDWARE_PREFETCHER (HARDWARE_PREFETCHER_AUTO)
+#endif
+
+#ifdef BLDCFG_PERFORMANCE_SOFTWARE_PREFETCHES
+ #define CFG_PERFORMANCE_SOFTWARE_PREFETCHES (BLDCFG_PERFORMANCE_SOFTWARE_PREFETCHES)
+#else
+ #define CFG_PERFORMANCE_SOFTWARE_PREFETCHES (SOFTWARE_PREFETCHES_AUTO)
+#endif
+
+#ifdef BLDCFG_PERFORMANCE_DRAM_PREFETCHER
+ #define CFG_PERFORMANCE_DRAM_PREFETCHER (BLDCFG_PERFORMANCE_DRAM_PREFETCHER)
+#else
+ #define CFG_PERFORMANCE_DRAM_PREFETCHER (DRAM_PREFETCHER_AUTO)
+#endif
+
+#ifdef BLDCFG_PLATFORM_DEEMPHASIS_LIST
+ #define CFG_PLATFORM_DEEMPHASIS_LIST (BLDCFG_PLATFORM_DEEMPHASIS_LIST)
+#else
+ #define CFG_PLATFORM_DEEMPHASIS_LIST (NULL)
+#endif
+
+#ifdef BLDCFG_VRM_CURRENT_LIMIT
+ #define CFG_VRM_CURRENT_LIMIT BLDCFG_VRM_CURRENT_LIMIT
+#else
+ #define CFG_VRM_CURRENT_LIMIT 0
+#endif
+
+#ifdef BLDCFG_VRM_LOW_POWER_THRESHOLD
+ #define CFG_VRM_LOW_POWER_THRESHOLD BLDCFG_VRM_LOW_POWER_THRESHOLD
+#else
+ #define CFG_VRM_LOW_POWER_THRESHOLD 0
+#endif
+
+#ifdef BLDCFG_VRM_SLEW_RATE
+ #define CFG_VRM_SLEW_RATE BLDCFG_VRM_SLEW_RATE
+#else
+ #define CFG_VRM_SLEW_RATE DFLT_VRM_SLEW_RATE
+#endif
+
+#ifdef BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT
+ #define CFG_VRM_MAXIMUM_CURRENT_LIMIT BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT
+#else
+ #define CFG_VRM_MAXIMUM_CURRENT_LIMIT (0)
+#endif
+
+#ifdef BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT
+ #define CFG_VRM_NB_MAXIMUM_CURRENT_LIMIT BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT
+#else
+ #define CFG_VRM_NB_MAXIMUM_CURRENT_LIMIT (0)
+#endif
+
+#ifdef BLDCFG_VRM_SVI_OCP_LEVEL
+ #define CFG_VRM_SVI_OCP_LEVEL BLDCFG_VRM_SVI_OCP_LEVEL
+#else
+ #define CFG_VRM_SVI_OCP_LEVEL 0
+#endif
+
+#ifdef BLDCFG_VRM_NB_SVI_OCP_LEVEL
+ #define CFG_VRM_NB_SVI_OCP_LEVEL BLDCFG_VRM_NB_SVI_OCP_LEVEL
+#else
+ #define CFG_VRM_NB_SVI_OCP_LEVEL 0
+#endif
+
+#ifdef BLDCFG_VRM_NB_CURRENT_LIMIT
+ #define CFG_VRM_NB_CURRENT_LIMIT BLDCFG_VRM_NB_CURRENT_LIMIT
+#else
+ #define CFG_VRM_NB_CURRENT_LIMIT (0)
+#endif
+
+#ifdef BLDCFG_VRM_NB_LOW_POWER_THRESHOLD
+ #define CFG_VRM_NB_LOW_POWER_THRESHOLD BLDCFG_VRM_NB_LOW_POWER_THRESHOLD
+#else
+ #define CFG_VRM_NB_LOW_POWER_THRESHOLD (0)
+#endif
+
+#ifdef BLDCFG_VRM_NB_SLEW_RATE
+ #define CFG_VRM_NB_SLEW_RATE BLDCFG_VRM_NB_SLEW_RATE
+#else
+ #define CFG_VRM_NB_SLEW_RATE DFLT_VRM_SLEW_RATE
+#endif
+
+#ifdef BLDCFG_PLAT_NUM_IO_APICS
+ #define CFG_PLAT_NUM_IO_APICS BLDCFG_PLAT_NUM_IO_APICS
+#else
+ #define CFG_PLAT_NUM_IO_APICS 0
+#endif
+
+#ifdef BLDCFG_MEM_INIT_PSTATE
+ #define CFG_MEM_INIT_PSTATE BLDCFG_MEM_INIT_PSTATE
+#else
+ #define CFG_MEM_INIT_PSTATE 0
+#endif
+
+#ifdef BLDCFG_PLATFORM_C1E_MODE
+ #define CFG_C1E_MODE BLDCFG_PLATFORM_C1E_MODE
+#else
+ #define CFG_C1E_MODE C1eModeDisabled
+#endif
+
+#ifdef BLDCFG_PLATFORM_C1E_OPDATA
+ #define CFG_C1E_OPDATA BLDCFG_PLATFORM_C1E_OPDATA
+#else
+ #define CFG_C1E_OPDATA 0
+#endif
+
+#ifdef BLDCFG_PLATFORM_C1E_OPDATA1
+ #define CFG_C1E_OPDATA1 BLDCFG_PLATFORM_C1E_OPDATA1
+#else
+ #define CFG_C1E_OPDATA1 0
+#endif
+
+#ifdef BLDCFG_PLATFORM_C1E_OPDATA2
+ #define CFG_C1E_OPDATA2 BLDCFG_PLATFORM_C1E_OPDATA2
+#else
+ #define CFG_C1E_OPDATA2 0
+#endif
+
+#ifdef BLDCFG_PLATFORM_C1E_OPDATA3
+ #define CFG_C1E_OPDATA3 BLDCFG_PLATFORM_C1E_OPDATA3
+#else
+ #define CFG_C1E_OPDATA3 0
+#endif
+
+#ifdef BLDCFG_PLATFORM_CSTATE_MODE
+ #define CFG_CSTATE_MODE BLDCFG_PLATFORM_CSTATE_MODE
+#else
+ #define CFG_CSTATE_MODE CStateModeC6
+#endif
+
+#ifdef BLDCFG_PLATFORM_CSTATE_OPDATA
+ #define CFG_CSTATE_OPDATA BLDCFG_PLATFORM_CSTATE_OPDATA
+#else
+ #define CFG_CSTATE_OPDATA 0
+#endif
+
+#ifdef BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS
+ #define CFG_CSTATE_IO_BASE_ADDRESS BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS
+#else
+ #define CFG_CSTATE_IO_BASE_ADDRESS 0
+#endif
+
+#ifdef BLDCFG_PLATFORM_CPB_MODE
+ #define CFG_CPB_MODE BLDCFG_PLATFORM_CPB_MODE
+#else
+ #define CFG_CPB_MODE CpbModeAuto
+#endif
+
+#ifdef BLDCFG_CORE_LEVELING_MODE
+ #define CFG_CORE_LEVELING_MODE BLDCFG_CORE_LEVELING_MODE
+#else
+ #define CFG_CORE_LEVELING_MODE 0
+#endif
+
+#ifdef BLDCFG_AMD_TDP_LIMIT
+ #define CFG_AMD_POWER_CEILING BLDCFG_AMD_TDP_LIMIT
+#else
+ #define CFG_AMD_POWER_CEILING 0
+#endif
+
+#ifdef BLDCFG_HEAP_DRAM_ADDRESS
+ #define CFG_HEAP_DRAM_ADDRESS BLDCFG_HEAP_DRAM_ADDRESS
+#else
+ #define CFG_HEAP_DRAM_ADDRESS AMD_HEAP_RAM_ADDRESS
+#endif
+
+#ifdef BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT
+ #define CFG_MEMORY_BUS_FREQUENCY_LIMIT BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT
+#else
+ #define CFG_MEMORY_BUS_FREQUENCY_LIMIT DDR800_FREQUENCY
+#endif
+
+#ifdef BLDCFG_MEMORY_MODE_UNGANGED
+ #define CFG_MEMORY_MODE_UNGANGED BLDCFG_MEMORY_MODE_UNGANGED
+#else
+ #define CFG_MEMORY_MODE_UNGANGED TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_QUAD_RANK_CAPABLE
+ #define CFG_MEMORY_QUAD_RANK_CAPABLE BLDCFG_MEMORY_QUAD_RANK_CAPABLE
+#else
+ #define CFG_MEMORY_QUAD_RANK_CAPABLE TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_QUADRANK_TYPE
+ #define CFG_MEMORY_QUADRANK_TYPE BLDCFG_MEMORY_QUADRANK_TYPE
+#else
+ #define CFG_MEMORY_QUADRANK_TYPE DFLT_MEMORY_QUADRANK_TYPE
+#endif
+
+#ifdef BLDCFG_MEMORY_RDIMM_CAPABLE
+ #define CFG_MEMORY_RDIMM_CAPABLE BLDCFG_MEMORY_RDIMM_CAPABLE
+#else
+ #define CFG_MEMORY_RDIMM_CAPABLE TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_LRDIMM_CAPABLE
+ #define CFG_MEMORY_LRDIMM_CAPABLE BLDCFG_MEMORY_LRDIMM_CAPABLE
+#else
+ #define CFG_MEMORY_LRDIMM_CAPABLE TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_UDIMM_CAPABLE
+ #define CFG_MEMORY_UDIMM_CAPABLE BLDCFG_MEMORY_UDIMM_CAPABLE
+#else
+ #define CFG_MEMORY_UDIMM_CAPABLE TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_SODIMM_CAPABLE
+ #define CFG_MEMORY_SODIMM_CAPABLE BLDCFG_MEMORY_SODIMM_CAPABLE
+#else
+ #define CFG_MEMORY_SODIMM_CAPABLE FALSE
+#endif
+
+#ifdef BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB
+ #define CFG_LIMIT_MEMORY_TO_BELOW_1TB BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB
+#else
+ #define CFG_LIMIT_MEMORY_TO_BELOW_1TB TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING
+ #define CFG_MEMORY_ENABLE_BANK_INTERLEAVING BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING
+#else
+ #define CFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING
+ #define CFG_MEMORY_ENABLE_NODE_INTERLEAVING BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING
+#else
+ #define CFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE
+#endif
+
+#ifdef BLDCFG_MEMORY_CHANNEL_INTERLEAVING
+ #define CFG_MEMORY_CHANNEL_INTERLEAVING BLDCFG_MEMORY_CHANNEL_INTERLEAVING
+#else
+ #define CFG_MEMORY_CHANNEL_INTERLEAVING TRUE
+#endif
+
+#ifdef BLDCFG_MEMORY_POWER_DOWN
+ #define CFG_MEMORY_POWER_DOWN BLDCFG_MEMORY_POWER_DOWN
+#else
+ #define CFG_MEMORY_POWER_DOWN FALSE
+#endif
+
+#ifdef BLDCFG_POWER_DOWN_MODE
+ #define CFG_POWER_DOWN_MODE BLDCFG_POWER_DOWN_MODE
+#else
+ #define CFG_POWER_DOWN_MODE POWER_DOWN_MODE_AUTO
+#endif
+
+#ifdef BLDCFG_ONLINE_SPARE
+ #define CFG_ONLINE_SPARE BLDCFG_ONLINE_SPARE
+#else
+ #define CFG_ONLINE_SPARE FALSE
+#endif
+
+#ifdef BLDCFG_MEMORY_PARITY_ENABLE
+ #define CFG_MEMORY_PARITY_ENABLE BLDCFG_MEMORY_PARITY_ENABLE
+#else
+ #define CFG_MEMORY_PARITY_ENABLE FALSE
+#endif
+
+#ifdef BLDCFG_BANK_SWIZZLE
+ #define CFG_BANK_SWIZZLE BLDCFG_BANK_SWIZZLE
+#else
+ #define CFG_BANK_SWIZZLE TRUE
+#endif
+
+#ifdef BLDCFG_TIMING_MODE_SELECT
+ #define CFG_TIMING_MODE_SELECT BLDCFG_TIMING_MODE_SELECT
+#else
+ #define CFG_TIMING_MODE_SELECT TIMING_MODE_AUTO
+#endif
+
+#ifdef BLDCFG_MEMORY_CLOCK_SELECT
+ #define CFG_MEMORY_CLOCK_SELECT BLDCFG_MEMORY_CLOCK_SELECT
+#else
+ #define CFG_MEMORY_CLOCK_SELECT DDR800_FREQUENCY
+#endif
+
+#ifdef BLDCFG_DQS_TRAINING_CONTROL
+ #define CFG_DQS_TRAINING_CONTROL BLDCFG_DQS_TRAINING_CONTROL
+#else
+ #define CFG_DQS_TRAINING_CONTROL TRUE
+#endif
+
+#ifdef BLDCFG_IGNORE_SPD_CHECKSUM
+ #define CFG_IGNORE_SPD_CHECKSUM BLDCFG_IGNORE_SPD_CHECKSUM
+#else
+ #define CFG_IGNORE_SPD_CHECKSUM FALSE
+#endif
+
+#ifdef BLDCFG_USE_BURST_MODE
+ #define CFG_USE_BURST_MODE BLDCFG_USE_BURST_MODE
+#else
+ #define CFG_USE_BURST_MODE FALSE
+#endif
+
+#ifdef BLDCFG_MEMORY_ALL_CLOCKS_ON
+ #define CFG_MEMORY_ALL_CLOCKS_ON BLDCFG_MEMORY_ALL_CLOCKS_ON
+#else
+ #define CFG_MEMORY_ALL_CLOCKS_ON FALSE
+#endif
+
+#ifdef BLDCFG_ENABLE_ECC_FEATURE
+ #define CFG_ENABLE_ECC_FEATURE BLDCFG_ENABLE_ECC_FEATURE
+#else
+ #define CFG_ENABLE_ECC_FEATURE TRUE
+#endif
+
+#ifdef BLDCFG_ECC_REDIRECTION
+ #define CFG_ECC_REDIRECTION BLDCFG_ECC_REDIRECTION
+#else
+ #define CFG_ECC_REDIRECTION FALSE
+#endif
+
+#ifdef BLDCFG_SCRUB_DRAM_RATE
+ #define CFG_SCRUB_DRAM_RATE BLDCFG_SCRUB_DRAM_RATE
+#else
+ #define CFG_SCRUB_DRAM_RATE DFLT_SCRUB_DRAM_RATE
+#endif
+
+#ifdef BLDCFG_SCRUB_L2_RATE
+ #define CFG_SCRUB_L2_RATE BLDCFG_SCRUB_L2_RATE
+#else
+ #define CFG_SCRUB_L2_RATE DFLT_SCRUB_L2_RATE
+#endif
+
+#ifdef BLDCFG_SCRUB_L3_RATE
+ #define CFG_SCRUB_L3_RATE BLDCFG_SCRUB_L3_RATE
+#else
+ #define CFG_SCRUB_L3_RATE DFLT_SCRUB_L3_RATE
+#endif
+
+#ifdef BLDCFG_SCRUB_IC_RATE
+ #define CFG_SCRUB_IC_RATE BLDCFG_SCRUB_IC_RATE
+#else
+ #define CFG_SCRUB_IC_RATE DFLT_SCRUB_IC_RATE
+#endif
+
+#ifdef BLDCFG_SCRUB_DC_RATE
+ #define CFG_SCRUB_DC_RATE BLDCFG_SCRUB_DC_RATE
+#else
+ #define CFG_SCRUB_DC_RATE DFLT_SCRUB_DC_RATE
+#endif
+
+#ifdef BLDCFG_ECC_SYNC_FLOOD
+ #define CFG_ECC_SYNC_FLOOD BLDCFG_ECC_SYNC_FLOOD
+#else
+ #define CFG_ECC_SYNC_FLOOD TRUE
+#endif
+
+#ifdef BLDCFG_ECC_SYMBOL_SIZE
+ #define CFG_ECC_SYMBOL_SIZE BLDCFG_ECC_SYMBOL_SIZE
+#else
+ #define CFG_ECC_SYMBOL_SIZE 0
+#endif
+
+#ifdef BLDCFG_1GB_ALIGN
+ #define CFG_1GB_ALIGN BLDCFG_1GB_ALIGN
+#else
+ #define CFG_1GB_ALIGN FALSE
+#endif
+
+#ifdef BLDCFG_UMA_ALLOCATION_MODE
+ #define CFG_UMA_MODE BLDCFG_UMA_ALLOCATION_MODE
+#else
+ #define CFG_UMA_MODE UMA_AUTO
+#endif
+
+#ifdef BLDCFG_FORCE_TRAINING_MODE
+ #define CFG_FORCE_TRAIN_MODE BLDCFG_FORCE_TRAINING_MODE
+#else
+ #define CFG_FORCE_TRAIN_MODE FORCE_TRAIN_AUTO
+#endif
+
+#ifdef BLDCFG_UMA_ALLOCATION_SIZE
+ #define CFG_UMA_SIZE BLDCFG_UMA_ALLOCATION_SIZE
+#else
+ #define CFG_UMA_SIZE 0
+#endif
+
+#ifdef BLDCFG_UMA_ABOVE4G_SUPPORT
+ #define CFG_UMA_ABOVE4G BLDCFG_UMA_ABOVE4G_SUPPORT
+#else
+ #define CFG_UMA_ABOVE4G FALSE
+#endif
+
+#ifdef BLDCFG_UMA_ALIGNMENT
+ #define CFG_UMA_ALIGNMENT BLDCFG_UMA_ALIGNMENT
+#else
+ #define CFG_UMA_ALIGNMENT NO_UMA_ALIGNED
+#endif
+
+#ifdef BLDCFG_DIMM_TYPE_USED_IN_MIXED_CONFIG
+ #define CFG_DIMM_TYPE_USED_IN_MIXED_CONFIG BLDCFG_DIMM_TYPE_USED_IN_MIXED_CONFIG
+#else
+ #define CFG_DIMM_TYPE_USED_IN_MIXED_CONFIG DDR3_TECHNOLOGY
+#endif
+
+#ifdef BLDCFG_PROCESSOR_SCOPE_IN_SB
+ #define CFG_PROCESSOR_SCOPE_IN_SB BLDCFG_PROCESSOR_SCOPE_IN_SB
+#else
+ #define CFG_PROCESSOR_SCOPE_IN_SB FALSE
+#endif
+
+#ifdef BLDCFG_S3_LATE_RESTORE
+ #define CFG_S3_LATE_RESTORE BLDCFG_S3_LATE_RESTORE
+#else
+ #define CFG_S3_LATE_RESTORE TRUE
+#endif
+
+#ifdef BLDCFG_USE_32_BYTE_REFRESH
+ #define CFG_USE_32_BYTE_REFRESH (BLDCFG_USE_32_BYTE_REFRESH)
+#else
+ #define CFG_USE_32_BYTE_REFRESH (FALSE)
+#endif
+
+#ifdef BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY
+ #define CFG_USE_VARIABLE_MCT_ISOC_PRIORITY (BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY)
+#else
+ #define CFG_USE_VARIABLE_MCT_ISOC_PRIORITY (FALSE)
+#endif
+
+#ifdef BLDCFG_PROCESSOR_SCOPE_NAME0
+ #define CFG_PROCESSOR_SCOPE_NAME0 BLDCFG_PROCESSOR_SCOPE_NAME0
+#else
+ #define CFG_PROCESSOR_SCOPE_NAME0 SCOPE_NAME_VALUE
+#endif
+
+#ifdef BLDCFG_PROCESSOR_SCOPE_NAME1
+ #define CFG_PROCESSOR_SCOPE_NAME1 BLDCFG_PROCESSOR_SCOPE_NAME1
+#else
+ #define CFG_PROCESSOR_SCOPE_NAME1 SCOPE_NAME_VALUE1
+#endif
+
+#ifdef BLDCFG_CFG_GNB_HD_AUDIO
+ #define CFG_GNB_HD_AUDIO BLDCFG_CFG_GNB_HD_AUDIO
+#else
+ #define CFG_GNB_HD_AUDIO TRUE
+#endif
+
+#ifdef BLDCFG_CFG_ABM_SUPPORT
+ #define CFG_ABM_SUPPORT BLDCFG_CFG_ABM_SUPPORT
+#else
+ #define CFG_ABM_SUPPORT FALSE
+#endif
+
+#ifdef BLDCFG_CFG_DYNAMIC_REFRESH_RATE
+ #define CFG_DYNAMIC_REFRESH_RATE BLDCFG_CFG_DYNAMIC_REFRESH_RATE
+#else
+ #define CFG_DYNAMIC_REFRESH_RATE 0
+#endif
+
+#ifdef BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL
+ #define CFG_LCD_BACK_LIGHT_CONTROL BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL
+#else
+ #define CFG_LCD_BACK_LIGHT_CONTROL 200
+#endif
+
+#ifdef BLDCFG_STEREO_3D_PINOUT
+ #define CFG_GNB_STEREO_3D_PINOUT BLDCFG_STEREO_3D_PINOUT
+#else
+ #define CFG_GNB_STEREO_3D_PINOUT 0
+#endif
+
+#ifdef BLDCFG_REMOTE_DISPLAY_SUPPORT
+ #define CFG_GNB_REMOTE_DISPLAY_SUPPORT BLDCFG_REMOTE_DISPLAY_SUPPORT
+#else
+ #define CFG_GNB_REMOTE_DISPLAY_SUPPORT FALSE
+#endif
+
+// Define pin configuration for SYNCFLOOD
+// Default to FALSE (Use pin as SYNCFLOOD)
+#ifdef BLDCFG_USE_SYNCFLOOD_AS_NMI
+ #define CFG_GNB_SYNCFLOOD_PIN_AS_NMI BLDCFG_USE_SYNCFLOOD_AS_NMI
+#else
+ #define CFG_GNB_SYNCFLOOD_PIN_AS_NMI FALSE
+#endif
+
+#ifdef BLDCFG_GNB_THERMAL_SENSOR_CORRECTION
+ #define CFG_GNB_THERMAL_SENSOR_CORRECTION BLDCFG_GNB_THERMAL_SENSOR_CORRECTION
+#else
+ #define CFG_GNB_THERMAL_SENSOR_CORRECTION 0
+#endif
+
+#ifdef BLDCFG_IGPU_SUBSYSTEM_ID
+ #define CFG_GNB_IGPU_SSID BLDCFG_IGPU_SUBSYSTEM_ID
+#else
+ #define CFG_GNB_IGPU_SSID 0
+#endif
+
+#ifdef BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID
+ #define CFG_GNB_HDAUDIO_SSID BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID
+#else
+ #define CFG_GNB_HDAUDIO_SSID 0
+#endif
+
+#ifdef BLDCFG_IGPU_ENABLE_DISABLE_POLICY
+ #define CFG_IGPU_ENABLE_DISABLE_POLICY BLDCFG_IGPU_ENABLE_DISABLE_POLICY
+#else
+ #define CFG_IGPU_ENABLE_DISABLE_POLICY IGPU_DISABLE_AUTO
+#endif
+
+#ifdef BLDCFG_APU_PCIE_PORTS_SUBSYSTEM_ID
+ #define CFG_GNB_PCIE_SSID BLDCFG_APU_PCIE_PORTS_SUBSYSTEM_ID
+#else
+ #define CFG_GNB_PCIE_SSID 0x12341022ul
+#endif
+
+#ifdef BLDCFG_GFX_LVDS_SPREAD_SPECTRUM
+ #define CFG_GFX_LVDS_SPREAD_SPECTRUM BLDCFG_GFX_LVDS_SPREAD_SPECTRUM
+#else
+ #define CFG_GFX_LVDS_SPREAD_SPECTRUM 0
+#endif
+
+#ifdef BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE
+ #define CFG_GFX_LVDS_SPREAD_SPECTRUM_RATE BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE
+#else
+ #define CFG_GFX_LVDS_SPREAD_SPECTRUM_RATE 0
+#endif
+
+#ifdef BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM
+ #define CFG_PCIE_REFCLK_SPREAD_SPECTRUM BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM
+#else
+ #define CFG_PCIE_REFCLK_SPREAD_SPECTRUM 0
+#endif
+
+#ifdef BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS
+ #define CFG_TEMP_PCIE_MMIO_BASE_ADDRESS BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS
+#else
+ #define CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000ul
+#endif
+
+#ifdef BLDCFG_ENABLE_EXTERNAL_VREF_FEATURE
+ #define CFG_ENABLE_EXTERNAL_VREF BLDCFG_ENABLE_EXTERNAL_VREF_FEATURE
+#else
+ #define CFG_ENABLE_EXTERNAL_VREF FALSE
+#endif
+
+#ifdef BLDOPT_REMOVE_EARLY_SAMPLES
+ #if BLDOPT_REMOVE_EARLY_SAMPLES == TRUE
+ #undef OPTION_EARLY_SAMPLES
+ #define OPTION_EARLY_SAMPLES FALSE
+ #else
+ #undef OPTION_EARLY_SAMPLES
+ #define OPTION_EARLY_SAMPLES TRUE
+ #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_ALIB
+ #if BLDOPT_REMOVE_ALIB == TRUE
+ #undef OPTION_ALIB
+ #define OPTION_ALIB FALSE
+ #else
+ #undef OPTION_ALIB
+ #define OPTION_ALIB TRUE
+ #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_FCH_COMPONENT
+ #if BLDOPT_REMOVE_FCH_COMPONENT == TRUE
+ #undef FCH_SUPPORT
+ #define FCH_SUPPORT FALSE
+ #endif
+#endif
+
+#ifdef BLDCFG_IOMMU_SUPPORT
+ #define CFG_IOMMU_SUPPORT BLDCFG_IOMMU_SUPPORT
+#else
+ #define CFG_IOMMU_SUPPORT TRUE
+#endif
+
+#ifdef BLDCFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE
+ #define CFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE BLDCFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE
+#else
+ #define CFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE 0
+#endif
+
+#ifdef BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL
+ #define CFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL
+#else
+ #define CFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL 0
+#endif
+
+#ifdef BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON
+ #define CFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON
+#else
+ #define CFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON 0
+#endif
+
+#ifdef BLDCFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE
+ #define CFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE BLDCFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE
+#else
+ #define CFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE 0
+#endif
+
+#ifdef BLDCFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY
+ #define CFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY BLDCFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY
+#else
+ #define CFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY 0
+#endif
+
+#ifdef BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON
+ #define CFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON
+#else
+ #define CFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 0
+#endif
+
+#ifdef BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL
+ #define CFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL
+#else
+ #define CFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 0
+#endif
+
+#ifdef BLDCFG_LVDS_MAX_PIXEL_CLOCK_FREQ
+ #define CFG_LVDS_MAX_PIXEL_CLOCK_FREQ BLDCFG_LVDS_MAX_PIXEL_CLOCK_FREQ
+#else
+ #define CFG_LVDS_MAX_PIXEL_CLOCK_FREQ 0
+#endif
+
+#ifdef BLDCFG_LCD_BIT_DEPTH_CONTROL_VALUE
+ #define CFG_LCD_BIT_DEPTH_CONTROL_VALUE BLDCFG_LCD_BIT_DEPTH_CONTROL_VALUE
+#else
+ #define CFG_LCD_BIT_DEPTH_CONTROL_VALUE 0
+#endif
+
+
+// BLDCFG_LVDS_24BBP_PANEL_MODE
+// This specifies the LVDS 24 BBP mode.
+// 0 - Use LDI mode (default).
+// 1 - Use FPDI mode.
+#ifdef BLDCFG_LVDS_24BBP_PANEL_MODE
+ #define CFG_LVDS_24BBP_PANEL_MODE BLDCFG_LVDS_24BBP_PANEL_MODE
+#else
+ #define CFG_LVDS_24BBP_PANEL_MODE 0
+#endif
+
+#ifdef BLDCFG_LVDS_MISC_888_FPDI_MODE
+ #define CFG_LVDS_MISC_888_FPDI_MODE BLDCFG_LVDS_MISC_888_FPDI_MODE
+#else
+ #define CFG_LVDS_MISC_888_FPDI_MODE FALSE
+#endif
+
+#ifdef BLDCFG_LVDS_MISC_DL_CH_SWAP
+ #define CFG_LVDS_MISC_DL_CH_SWAP BLDCFG_LVDS_MISC_DL_CH_SWAP
+#else
+ #define CFG_LVDS_MISC_DL_CH_SWAP FALSE
+#endif
+
+#ifdef BLDCFG_LVDS_MISC_VSYNC_ACTIVE_LOW
+ #define CFG_LVDS_MISC_VSYNC_ACTIVE_LOW BLDCFG_LVDS_MISC_VSYNC_ACTIVE_LOW
+#else
+ #define CFG_LVDS_MISC_VSYNC_ACTIVE_LOW FALSE
+#endif
+
+#ifdef BLDCFG_LVDS_MISC_HSYNC_ACTIVE_LOW
+ #define CFG_LVDS_MISC_HSYNC_ACTIVE_LOW BLDCFG_LVDS_MISC_HSYNC_ACTIVE_LOW
+#else
+ #define CFG_LVDS_MISC_HSYNC_ACTIVE_LOW FALSE
+#endif
+
+#ifdef BLDCFG_LVDS_MISC_BLON_ACTIVE_LOW
+ #define CFG_LVDS_MISC_BLON_ACTIVE_LOW BLDCFG_LVDS_MISC_BLON_ACTIVE_LOW
+#else
+ #define CFG_LVDS_MISC_BLON_ACTIVE_LOW FALSE
+#endif
+
+#ifdef BLDCFG_LVDS_MISC_VOLT_OVERWRITE_ENABLE
+ #define CFG_LVDS_MISC_VOLT_OVERWRITE_ENABLE BLDCFG_LVDS_MISC_VOLT_OVERWRITE_ENABLE
+#else
+ #define CFG_LVDS_MISC_VOLT_OVERWRITE_ENABLE FALSE
+#endif
+
+#ifdef BLDCFG_LVDS_MISC_VOLT_ADJUSTMENT
+ #define CFG_LVDS_MISC_VOLT_ADJUSTMENT BLDCFG_LVDS_MISC_VOLT_ADJUSTMENT
+#else
+ #define CFG_LVDS_MISC_VOLT_ADJUSTMENT 0
+#endif
+
+#ifdef BLDCFG_DISPLAY_MISC_VBIOS_FAST_BOOT_ENABLE
+ #define CFG_DISPLAY_MISC_VBIOS_FAST_BOOT_ENABLE BLDCFG_DISPLAY_MISC_VBIOS_FAST_BOOT_ENABLE
+#else
+ #define CFG_DISPLAY_MISC_VBIOS_FAST_BOOT_ENABLE FALSE
+#endif
+
+#ifdef BLDCFG_DP_FIXED_VOLT_SWING
+ #define CFG_DP_FIXED_VOLT_SWING BLDCFG_DP_FIXED_VOLT_SWING
+#else
+ #define CFG_DP_FIXED_VOLT_SWING 0
+#endif
+
+#ifdef BLDCFG_PLATFORM_POWER_POLICY_MODE
+ #define CFG_PLATFORM_POWER_POLICY_MODE (BLDCFG_PLATFORM_POWER_POLICY_MODE)
+#else
+ #define CFG_PLATFORM_POWER_POLICY_MODE (Performance)
+#endif
+
+#ifdef BLDCFG_NB_PSTATES_SUPPORTED
+ #define CFG_NB_PSTATES_SUPPORTED (BLDCFG_NB_PSTATES_SUPPORTED)
+#else
+ #define CFG_NB_PSTATES_SUPPORTED (TRUE)
+#endif
+
+#ifdef BLDCFG_HTC_TEMPERATURE_LIMIT
+ #define CFG_HTC_TEMPERATURE_LIMIT (BLDCFG_HTC_TEMPERATURE_LIMIT)
+#else
+ #define CFG_HTC_TEMPERATURE_LIMIT (0)
+#endif
+
+#ifdef BLDCFG_LHTC_TEMPERATURE_LIMIT
+ #define CFG_LHTC_TEMPERATURE_LIMIT (BLDCFG_LHTC_TEMPERATURE_LIMIT)
+#else
+ #define CFG_LHTC_TEMPERATURE_LIMIT (0)
+#endif
+
+#ifdef BLDCFG_PCI_MMIO_BASE
+ #define CFG_PCI_MMIO_BASE (BLDCFG_PCI_MMIO_BASE)
+#else
+ #define CFG_PCI_MMIO_BASE (0)
+#endif
+
+#ifdef BLDCFG_PCI_MMIO_SIZE
+ #define CFG_PCI_MMIO_SIZE (BLDCFG_PCI_MMIO_SIZE)
+#else
+ #define CFG_PCI_MMIO_SIZE (0)
+#endif
+
+#ifdef BLDCFG_AP_MTRR_SETTINGS_LIST
+ #define CFG_AP_MTRR_SETTINGS_LIST (BLDCFG_AP_MTRR_SETTINGS_LIST)
+#else
+ #define CFG_AP_MTRR_SETTINGS_LIST (NULL)
+#endif
+
+#ifdef BLDCFG_IOMMU_EXCLUSION_RANGE_LIST
+ #define CFG_IOMMU_EXCLUSION_RANGE_LIST (BLDCFG_IOMMU_EXCLUSION_RANGE_LIST)
+#else
+ #define CFG_IOMMU_EXCLUSION_RANGE_LIST (NULL)
+#endif
+
+#ifdef BLDCFG_HYBRID_BOOST_ENABLE
+ #define CFG_HYBRID_BOOST_ENABLE BLDCFG_HYBRID_BOOST_ENABLE
+#else
+ #define CFG_HYBRID_BOOST_ENABLE TRUE
+#endif
+
+#ifdef BLDCFG_GNB_IOAPIC_ADDRESS
+ #define CFG_GNB_IOAPIC_ADDRESS BLDCFG_GNB_IOAPIC_ADDRESS
+#else
+ #define CFG_GNB_IOAPIC_ADDRESS NULL
+#endif
+
+#ifdef BLDCFG_GNB_IOMMU_ADDRESS
+ #define CFG_GNB_IOMMU_ADDRESS BLDCFG_GNB_IOMMU_ADDRESS
+#else
+ #define CFG_GNB_IOMMU_ADDRESS NULL
+#endif
+
+#ifdef BLDCFG_ENABLE_DATA_EYE
+ #define CFG_ENABLE_DATA_EYE BLDCFG_ENABLE_DATA_EYE
+#else
+ #define CFG_ENABLE_DATA_EYE TRUE
+#endif
+
+#ifdef BLDCFG_ACPI_SET_OEM_ID
+ #define CFG_ACPI_SET_OEM_ID BLDCFG_ACPI_SET_OEM_ID
+#else
+ #define CFG_ACPI_SET_OEM_ID 'A','M','D',' ',' ',' '
+#endif
+
+#ifdef BLDCFG_ACPI_SET_OEM_TABLE_ID
+ #define CFG_ACPI_SET_OEM_TABLE_ID BLDCFG_ACPI_SET_OEM_TABLE_ID
+#else
+ #define CFG_ACPI_SET_OEM_TABLE_ID 'A','G','E','S','A',' ',' ',' '
+#endif
+
+#ifdef BLDCFG_DOCKED_TDP_HEADROOM
+ #define CFG_DOCKED_TDP_HEADROOM BLDCFG_DOCKED_TDP_HEADROOM
+#else
+ #define CFG_DOCKED_TDP_HEADROOM TRUE
+#endif
+
+#ifdef BLDCFG_DRAM_DOUBLE_REFRESH_RATE
+ #define CFG_DRAM_DOUBLE_REFRESH_RATE BLDCFG_DRAM_DOUBLE_REFRESH_RATE
+#else
+ #define CFG_DRAM_DOUBLE_REFRESH_RATE FALSE
+#endif
+
+/*---------------------------------------------------------------------------
+ * Processing the options: Third, perform the option cross checks
+ *--------------------------------------------------------------------------*/
+// Assure that at least one type of memory support is included
+#if OPTION_UDIMMS == FALSE
+ #if OPTION_RDIMMS == FALSE
+ #if OPTION_SODIMMS == FALSE
+ #if OPTION_LRDIMMS == FALSE
+ #error BLDOPT: No DIMM support selected. Either BLDOPT_REMOVE_UDIMMS_SUPPORT or BLDOPT_REMOVE_RDIMMS_SUPPORT or BLDOPT_REMOVE_SODIMMS_SUPPORT or BLDOPT_REMOVE_LRDIMMS_SUPPORT must be FALSE.
+ #endif
+ #endif
+ #endif
+#endif
+// Ensure at least one dimm type is capable
+#if CFG_MEMORY_RDIMM_CAPABLE == FALSE
+ #if CFG_MEMORY_UDIMM_CAPABLE == FALSE
+ #if CFG_MEMORY_SODIMM_CAPABLE == FALSE
+ #if CFG_MEMORY_LRDIMM_CAPABLE == FALSE
+ #error BLDCFG: No dimm type is capable
+ #endif
+ #endif
+ #endif
+#endif
+// Check LRDIMM CODE and LRDIMM CFG item
+#if CFG_MEMORY_LRDIMM_CAPABLE == FALSE
+ #if BLDOPT_REMOVE_LRDIMMS_SUPPORT == TRUE
+ #error Warning: LRDIMM capability is false, but LRIDMM support code included
+ #endif
+#endif
+// Turn off multi-socket based features if only one node...
+#if OPTION_MULTISOCKET == FALSE
+ #undef OPTION_PARALLEL_TRAINING
+ #define OPTION_PARALLEL_TRAINING FALSE
+ #undef OPTION_NODE_INTERLEAVE
+ #define OPTION_NODE_INTERLEAVE FALSE
+#endif
+// Ensure the frequency limit is valid
+#if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR2133_FREQUENCY)
+ #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR1866_FREQUENCY)
+ #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR1600_FREQUENCY)
+ #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR1333_FREQUENCY)
+ #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR1066_FREQUENCY)
+ #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR800_FREQUENCY)
+ #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR667_FREQUENCY)
+ #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR533_FREQUENCY)
+ #if (CFG_MEMORY_BUS_FREQUENCY_LIMIT != DDR400_FREQUENCY)
+ #error BLDCFG: Unsupported memory bus frequency
+ #endif
+ #endif
+ #endif
+ #endif
+ #endif
+ #endif
+ #endif
+ #endif
+#endif
+// Ensure timing mode is valid
+#if CFG_TIMING_MODE_SELECT != TIMING_MODE_SPECIFIC
+ #if CFG_TIMING_MODE_SELECT != TIMING_MODE_LIMITED
+ #if CFG_TIMING_MODE_SELECT != TIMING_MODE_AUTO
+ #error BLDCFG: Invalid timing mode is set
+ #endif
+ #endif
+#endif
+// Ensure the scrub rate is valid
+#if ((CFG_SCRUB_DRAM_RATE > 0x16) && (CFG_SCRUB_DRAM_RATE != 0xFF))
+ #error BLDCFG: Unsupported dram scrub rate set
+#endif
+#if CFG_SCRUB_L2_RATE > 0x16
+ #error BLDCFG: Unsupported L2 scrubber rate set
+#endif
+#if CFG_SCRUB_L3_RATE > 0x16
+ #error BLDCFG: unsupported L3 scrubber rate set
+#endif
+#if CFG_SCRUB_IC_RATE > 0x16
+ #error BLDCFG: Unsupported Instruction cache scrub rate set
+#endif
+#if CFG_SCRUB_DC_RATE > 0x16
+ #error BLDCFG: Unsupported Dcache scrub rate set
+#endif
+// Ensure Quad rank dimm type is valid
+#if CFG_MEMORY_QUADRANK_TYPE != QUADRANK_UNBUFFERED
+ #if CFG_MEMORY_QUADRANK_TYPE != QUADRANK_REGISTERED
+ #error BLDCFG: Invalid quad rank dimm type set
+ #endif
+#endif
+// Ensure ECC symbol size is valid
+#if CFG_ECC_SYMBOL_SIZE != ECCSYMBOLSIZE_USE_BKDG
+ #if CFG_ECC_SYMBOL_SIZE != ECCSYMBOLSIZE_FORCE_X4
+ #if CFG_ECC_SYMBOL_SIZE != ECCSYMBOLSIZE_FORCE_X8
+ #error BLDCFG: Invalid Ecc symbol size set
+ #endif
+ #endif
+#endif
+// Ensure power down mode is valid
+#if CFG_POWER_DOWN_MODE != POWER_DOWN_BY_CHIP_SELECT
+ #if CFG_POWER_DOWN_MODE != POWER_DOWN_BY_CHANNEL
+ #if AGESA_ENTRY_INIT_POST == TRUE
+ #error BLDCFG: Invalid power down mode set
+ #endif
+ #endif
+#endif
+
+// Ensure P-state dependence settings do not conflict
+#if (CFG_ACPI_PSTATES_PSD_POLICY == PsdPolicyDependent) && (CFG_ACPI_PSTATE_PSD_INDPX == TRUE)
+ #error BLDCFG: Conflict P-state dependency settings between BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT and BLDCFG_ACPI_PSTATES_PSD_POLICY.
+#endif
+
+#if ((CFG_HTC_TEMPERATURE_LIMIT == 0) && (CFG_LHTC_TEMPERATURE_LIMIT != 0))
+ #error BLDCFG: Cannot define BLDCFG_LHTC_TEMPERATURE_LIMIT unless BLDCFG_HTC_TEMPERATURE_LIMIT is also not zero.
+#endif
+
+#if ((CFG_LHTC_TEMPERATURE_LIMIT == 0) && (CFG_HTC_TEMPERATURE_LIMIT != 0))
+ #error BLDCFG: Cannot define BLDCFG_HTC_TEMPERATURE_LIMIT unless BLDCFG_LHTC_TEMPERATURE_LIMIT is also not zero.
+#endif
+
+
+
+/*****************************************************************************
+ *
+ * Process the option logic, setting local control variables
+ *
+ ****************************************************************************/
+#if OPTION_ACPI_PSTATES == TRUE
+ #define OPTFCN_ACPI_TABLES CreateAcpiTablesMain
+ #define OPTFCN_GATHER_DATA PStateGatherData
+ #if OPTION_MULTISOCKET == TRUE
+ #define OPTFCN_PSTATE_LEVELING PStateLeveling
+ #else
+ #define OPTFCN_PSTATE_LEVELING CommonReturnAgesaSuccess
+ #endif
+#else
+ #define OPTFCN_ACPI_TABLES CommonReturnAgesaSuccess
+ #define OPTFCN_GATHER_DATA CommonReturnAgesaSuccess
+ #define OPTFCN_PSTATE_LEVELING CommonReturnAgesaSuccess
+#endif
+
+// Consolidate P-state dependence setings
+#if (CFG_ACPI_PSTATES_PSD_POLICY == PsdPolicyProcessorDefault) && (CFG_ACPI_PSTATE_PSD_INDPX == TRUE)
+ #undef CFG_ACPI_PSTATES_PSD_POLICY
+ #define CFG_ACPI_PSTATES_PSD_POLICY PsdPolicyIndependent
+#endif
+
+/*****************************************************************************
+ *
+ * Include the structure definitions for the defaults table structures
+ *
+ ****************************************************************************/
+#include "Options.h"
+#include "OptionCpuFamiliesInstall.h"
+#include "OptionsHt.h"
+#include "OptionHtInstall.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "OptionMemoryInstall.h"
+#include "OptionMemoryRecovery.h"
+#include "OptionMemoryRecoveryInstall.h"
+#include "OptionCpuFeaturesInstall.h"
+#include "OptionDmi.h"
+#include "OptionDmiInstall.h"
+#include "OptionPstate.h"
+#include "OptionPstateInstall.h"
+#include "OptionWhea.h"
+#include "OptionWheaInstall.h"
+#include "OptionCrat.h"
+#include "OptionCratInstall.h"
+#include "OptionCdit.h"
+#include "OptionCditInstall.h"
+#include "OptionSrat.h"
+#include "OptionSratInstall.h"
+#include "OptionSlit.h"
+#include "OptionSlitInstall.h"
+#include "OptionMultiSocket.h"
+#include "OptionMultiSocketInstall.h"
+#include "OptionIdsInstall.h"
+#include "OptionGfxRecovery.h"
+#include "OptionGfxRecoveryInstall.h"
+#include "OptionGnb.h"
+#include "OptionGnbInstall.h"
+#include "OptionS3ScriptInstall.h"
+#include "OptionFchInstall.h"
+#include "OptionMmioMapInstall.h"
+#include "OptionPrefetchModeInstall.h"
+
+
+/*****************************************************************************
+ *
+ * Generate the output structures (defaults tables)
+ *
+ ****************************************************************************/
+
+FCH_PLATFORM_POLICY FchUserOptions = {
+ CFG_SMBUS0_BASE_ADDRESS, // CfgSmbus0BaseAddress
+ CFG_SMBUS1_BASE_ADDRESS, // CfgSmbus1BaseAddress
+ CFG_SIO_PME_BASE_ADDRESS, // CfgSioPmeBaseAddress
+ CFG_ACPI_PM1_EVT_BLOCK_ADDRESS, // CfgAcpiPm1EvtBlkAddr
+ CFG_ACPI_PM1_CNT_BLOCK_ADDRESS, // CfgAcpiPm1CntBlkAddr
+ CFG_ACPI_PM_TMR_BLOCK_ADDRESS, // CfgAcpiPmTmrBlkAddr
+ CFG_ACPI_CPU_CNT_BLOCK_ADDRESS, // CfgCpuControlBlkAddr
+ CFG_ACPI_GPE0_BLOCK_ADDRESS, // CfgAcpiGpe0BlkAddr
+ CFG_SMI_CMD_PORT_ADDRESS, // CfgSmiCmdPortAddr
+ CFG_ACPI_PMA_CNTBLK_ADDRESS, // CfgAcpiPmaCntBlkAddr
+ CFG_GEC_SHADOW_ROM_BASE, // CfgGecShadowRomBase
+ CFG_WATCHDOG_TIMER_BASE, // CfgWatchDogTimerBase
+ CFG_SPI_ROM_BASE_ADDRESS, // CfgSpiRomBaseAddress
+ CFG_HPET_BASE_ADDRESS, // CfgHpetBaseAddress
+ 0x780D1022ul,
+ CFG_SMBUS_SSID, // CfgSmbusSsid
+ CFG_IDE_SSID, // CfgIdeSsid
+ CFG_SATA_AHCI_SSID, // CfgSataAhciSsid
+ CFG_SATA_IDE_SSID, // CfgSataIdeSsid
+ CFG_SATA_RAID5_SSID, // CfgSataRaid5Ssid
+ CFG_SATA_RAID_SSID, // CfgSataRaidSsid
+ CFG_EHCI_SSID, // CfgEhcidSsid
+ CFG_OHCI_SSID, // CfgOhcidSsid
+ CFG_LPC_SSID, // CfgLpcSsid
+ CFG_SD_SSID, // CfgSdSsid
+ CFG_XHCI_SSID, // CfgXhciSsid
+ CFG_FCH_PORT80_BEHIND_PCIB, // CfgFchPort80BehindPcib
+ CFG_FCH_ENABLE_ACPI_SLEEP_TRAP, // CfgFchEnableAcpiSleepTrap
+ CFG_FCH_GPP_LINK_CONFIG, // CfgFchGppLinkConfig
+ CFG_FCH_GPP_PORT0_PRESENT, // CfgFchGppPort0Present
+ CFG_FCH_GPP_PORT1_PRESENT, // CfgFchGppPort1Present
+ CFG_FCH_GPP_PORT2_PRESENT, // CfgFchGppPort2Present
+ CFG_FCH_GPP_PORT3_PRESENT, // CfgFchGppPort3Present
+ CFG_FCH_GPP_PORT0_HOTPLUG, // CfgFchGppPort0HotPlug
+ CFG_FCH_GPP_PORT1_HOTPLUG, // CfgFchGppPort1HotPlug
+ CFG_FCH_GPP_PORT2_HOTPLUG, // CfgFchGppPort2HotPlug
+ CFG_FCH_GPP_PORT3_HOTPLUG, // CfgFchGppPort3HotPlug
+
+ CFG_FCH_ESATA_PORT_BITMAP, // CfgFchEsataPortBitMap
+ CFG_FCH_IR_PIN_CONTROL, // CfgFchIrPinControl
+ CFG_FCH_SD_CLOCK_CONTROL, // CfgFchSdClockControl
+ CFG_FCH_SCI_MAP_LIST, // *CfgFchSciMapControl
+ CFG_FCH_SATA_PHY_LIST, // *CfgFchSataPhyControl
+ CFG_FCH_GPIO_CONTROL_LIST // *CfgFchGpioControl
+};
+
+BUILD_OPT_CFG UserOptions = {
+ { // AGESA version string
+ AGESA_CODE_SIGNATURE, // code header Signature
+ AGESA_PACKAGE_STRING, // 16 character ID
+ AGESA_VERSION_STRING, // 12 character version string
+ 0 // null string terminator
+ },
+ //Build Option Area
+ OPTION_UDIMMS, //UDIMMS
+ OPTION_RDIMMS, //RDIMMS
+ OPTION_LRDIMMS, //LRDIMMS
+ OPTION_ECC, //ECC
+ OPTION_BANK_INTERLEAVE, //BANK_INTERLEAVE
+ OPTION_DCT_INTERLEAVE, //DCT_INTERLEAVE
+ OPTION_NODE_INTERLEAVE, //NODE_INTERLEAVE
+ OPTION_PARALLEL_TRAINING, //PARALLEL_TRAINING
+ OPTION_ONLINE_SPARE, //ONLINE_SPARE
+ OPTION_MEM_RESTORE, //MEM CONTEXT RESTORE
+ OPTION_MULTISOCKET, //MULTISOCKET
+ OPTION_ACPI_PSTATES, //ACPI_PSTATES
+ OPTION_CPU_PSTATE_HPC_MODE, //High Preformace Computing (HPC) mode
+ OPTION_CRAT, //CRAT
+ OPTION_CDIT, //CDIT
+ OPTION_SRAT, //SRAT
+ OPTION_SLIT, //SLIT
+ OPTION_WHEA, //WHEA
+ OPTION_DMI, //DMI
+ OPTION_EARLY_SAMPLES, //EARLY_SAMPLES
+ OPTION_ADDR_TO_CS_TRANSLATOR, //ADDR_TO_CS_TRANSLATOR
+
+ //Build Configuration Area
+ CFG_PCI_MMIO_BASE,
+ CFG_PCI_MMIO_SIZE,
+ {
+ // CoreVrm
+ {
+ CFG_VRM_CURRENT_LIMIT, // VrmCurrentLimit
+ CFG_VRM_LOW_POWER_THRESHOLD, // VrmLowPowerThershold
+ CFG_VRM_SLEW_RATE, // VrmSlewRate
+ CFG_VRM_HIGH_SPEED_ENABLE, // VrmHiSpeedEnable
+ CFG_VRM_MAXIMUM_CURRENT_LIMIT, // VrmMaximumCurrentLimit
+ CFG_VRM_SVI_OCP_LEVEL // VrmSviOcpLevel
+ },
+ // NbVrm
+ {
+ CFG_VRM_NB_CURRENT_LIMIT, // VrmNbCurrentLimit
+ CFG_VRM_NB_LOW_POWER_THRESHOLD, // VrmNbLowPowerThershold
+ CFG_VRM_NB_SLEW_RATE, // VrmNbSlewRate
+ CFG_VRM_NB_HIGH_SPEED_ENABLE, // VrmNbHiSpeedEnable
+ CFG_VRM_NB_MAXIMUM_CURRENT_LIMIT, // VrmNbMaximumCurrentLimit
+ CFG_VRM_NB_SVI_OCP_LEVEL // VrmNbSviOcpLevel
+ }
+ },
+ CFG_PLAT_NUM_IO_APICS, //PlatformApicIoNumber
+ CFG_MEM_INIT_PSTATE, //MemoryInitPstate
+ CFG_C1E_MODE, //C1eMode
+ CFG_C1E_OPDATA, //C1ePlatformData
+ CFG_C1E_OPDATA1, //C1ePlatformData1
+ CFG_C1E_OPDATA2, //C1ePlatformData2
+ CFG_C1E_OPDATA3, //C1ePlatformData3
+ CFG_CSTATE_MODE, //CStateMode
+ CFG_CSTATE_OPDATA, //CStatePlatformData
+ CFG_CSTATE_IO_BASE_ADDRESS, //CStateIoBaseAddress
+ CFG_CPB_MODE, //CpbMode
+ LOW_POWER_PSTATE_FOR_PROCHOT_AUTO, //Low power Pstate for PROCHOT, it's always set to 'AUTO'
+ CFG_CORE_LEVELING_MODE, //CoreLevelingCofig
+ {
+ CFG_PLATFORM_CONTROL_FLOW_MODE, // The platform's control flow mode.
+ CFG_USE_HT_ASSIST, // CfgUseHtAssist
+ CFG_USE_ATM_MODE, // CfgUseAtmMode
+ CFG_USE_NBR_CACHE, // CfgUseNbrCache
+ CFG_USE_32_BYTE_REFRESH, // Display Refresh uses 32 byte packets.
+ CFG_USE_VARIABLE_MCT_ISOC_PRIORITY, // The Memory controller will be set to Variable Isoc Priority.
+ // ADVANCED_PERFORMANCE_PROFILE
+ {
+ CFG_PERFORMANCE_HARDWARE_PREFETCHER, // Hardware prefetcher mode
+ CFG_PERFORMANCE_SOFTWARE_PREFETCHES, // Software prefetcher mode
+ CFG_PERFORMANCE_DRAM_PREFETCHER // Dram prefetcher mode
+ },
+ CFG_PLATFORM_POWER_POLICY_MODE, // The platform's power policy mode.
+ CFG_NB_PSTATES_SUPPORTED // The Nb-Pstates is supported or not
+ },
+ (CPU_HT_DEEMPHASIS_LEVEL *)CFG_PLATFORM_DEEMPHASIS_LIST, // Deemphasis settings
+ CFG_AMD_PLATFORM_TYPE, // CfgAmdPlatformType
+ CFG_AMD_POWER_CEILING, // CfgAmdPowerCeiling
+ CFG_HTC_TEMPERATURE_LIMIT, // CfgHtcTemperatureLimit
+ CFG_LHTC_TEMPERATURE_LIMIT, // CfgLhtcTemperatureLimit
+
+ CFG_MEMORY_BUS_FREQUENCY_LIMIT, // CfgMemoryBusFrequencyLimit
+ CFG_MEMORY_MODE_UNGANGED, // CfgMemoryModeUnganged
+ CFG_MEMORY_QUAD_RANK_CAPABLE, // CfgMemoryQuadRankCapable
+ CFG_MEMORY_QUADRANK_TYPE, // CfgMemoryQuadrankType
+ CFG_MEMORY_RDIMM_CAPABLE, // CfgMemoryRDimmCapable
+ CFG_MEMORY_LRDIMM_CAPABLE, // CfgMemoryLRDimmCapable
+ CFG_MEMORY_UDIMM_CAPABLE, // CfgMemoryUDimmCapable
+ CFG_MEMORY_SODIMM_CAPABLE, // CfgMemorySodimmCapable
+ CFG_LIMIT_MEMORY_TO_BELOW_1TB, // CfgLimitMemoryToBelow1Tb
+ CFG_MEMORY_ENABLE_BANK_INTERLEAVING, // CfgMemoryEnableBankInterleaving
+ CFG_MEMORY_ENABLE_NODE_INTERLEAVING, // CfgMemoryEnableNodeInterleaving
+ CFG_MEMORY_CHANNEL_INTERLEAVING, // CfgMemoryChannelInterleaving
+ CFG_MEMORY_POWER_DOWN, // CfgMemoryPowerDown
+ CFG_POWER_DOWN_MODE, // CfgPowerDownMode
+ CFG_ONLINE_SPARE, // CfgOnlineSpare
+ CFG_MEMORY_PARITY_ENABLE, // CfgMemoryParityEnable
+ CFG_BANK_SWIZZLE, // CfgBankSwizzle
+ CFG_TIMING_MODE_SELECT, // CfgTimingModeSelect
+ CFG_MEMORY_CLOCK_SELECT, // CfgMemoryClockSelect
+ CFG_DQS_TRAINING_CONTROL, // CfgDqsTrainingControl
+ CFG_IGNORE_SPD_CHECKSUM, // CfgIgnoreSpdChecksum
+ CFG_USE_BURST_MODE, // CfgUseBurstMode
+ CFG_MEMORY_ALL_CLOCKS_ON, // CfgMemoryAllClocksOn
+ CFG_ENABLE_ECC_FEATURE, // CfgEnableEccFeature
+ CFG_ECC_REDIRECTION, // CfgEccRedirection
+ CFG_SCRUB_DRAM_RATE, // CfgScrubDramRate
+ CFG_SCRUB_L2_RATE, // CfgScrubL2Rate
+ CFG_SCRUB_L3_RATE, // CfgScrubL3Rate
+ CFG_SCRUB_IC_RATE, // CfgScrubIcRate
+ CFG_SCRUB_DC_RATE, // CfgScrubDcRate
+ CFG_ECC_SYNC_FLOOD, // CfgEccSyncFlood
+ CFG_ECC_SYMBOL_SIZE, // CfgEccSymbolSize
+ CFG_HEAP_DRAM_ADDRESS, // CfgHeapDramAddress
+ CFG_1GB_ALIGN, // CfgNodeMem1GBAlign
+ CFG_S3_LATE_RESTORE, // CfgS3LateRestore
+ CFG_ACPI_PSTATE_PSD_INDPX, // CfgAcpiPstateIndependent
+ CFG_ACPI_PSTATES_PSD_POLICY, // CfgAcpiPstatesPsdPolicy
+ (AP_MTRR_SETTINGS *) CFG_AP_MTRR_SETTINGS_LIST, // CfgApMtrrSettingsList
+ CFG_UMA_MODE, // CfgUmaMode
+ CFG_UMA_SIZE, // CfgUmaSize
+ CFG_UMA_ABOVE4G, // CfgUmaAbove4G
+ CFG_UMA_ALIGNMENT, // CfgUmaAlignment
+ CFG_PROCESSOR_SCOPE_IN_SB, // CfgProcessorScopeInSb
+ CFG_PROCESSOR_SCOPE_NAME0, // CfgProcessorScopeName0
+ CFG_PROCESSOR_SCOPE_NAME1, // CfgProcessorScopeName1
+ CFG_GNB_HD_AUDIO, // CfgGnbHdAudio
+ CFG_ABM_SUPPORT, // CfgAbmSupport
+ CFG_DYNAMIC_REFRESH_RATE, // CfgDynamicRefreshRate
+ CFG_LCD_BACK_LIGHT_CONTROL, // CfgLcdBackLightControl
+ CFG_GNB_STEREO_3D_PINOUT, // CfgGnb3dStereoPinIndex
+ CFG_TEMP_PCIE_MMIO_BASE_ADDRESS, // CfgTempPcieMmioBaseAddress
+ CFG_GNB_IGPU_SSID, // CfgGnbIGPUSSID
+ CFG_GNB_HDAUDIO_SSID, // CfgGnbHDAudioSSID
+ CFG_GNB_PCIE_SSID, // CfgGnbPcieSSID
+ CFG_GFX_LVDS_SPREAD_SPECTRUM, // CfgLvdsSpreadSpectrum
+ CFG_GFX_LVDS_SPREAD_SPECTRUM_RATE, // CfgLvdsSpreadSpectrumRate
+
+ &FchUserOptions, // FchBldCfg
+
+ CFG_IOMMU_SUPPORT, // CfgIommuSupport
+ CFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE, // CfgLvdsPowerOnSeqDigonToDe
+ CFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL, // CfgLvdsPowerOnSeqDeToVaryBl
+ CFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON, // CfgLvdsPowerOnSeqDeToDigon
+ CFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE, // CfgLvdsPowerOnSeqVaryBlToDe
+ CFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY,// CfgLvdsPowerOnSeqOnToOffDelay
+ CFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON,// CfgLvdsPowerOnSeqVaryBlToBlon
+ CFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL,// CfgLvdsPowerOnSeqBlonToVaryBl
+ CFG_LVDS_MAX_PIXEL_CLOCK_FREQ, // CfgLvdsMaxPixelClockFreq
+ CFG_LCD_BIT_DEPTH_CONTROL_VALUE, // CfgLcdBitDepthControlValue
+ CFG_LVDS_24BBP_PANEL_MODE, // CfgLvds24bbpPanelMode
+ {{
+ CFG_LVDS_MISC_888_FPDI_MODE, // CfgLvdsMiscControl
+ CFG_LVDS_MISC_DL_CH_SWAP, // CfgLvdsMiscControl
+ CFG_LVDS_MISC_VSYNC_ACTIVE_LOW, // CfgLvdsMiscControl
+ CFG_LVDS_MISC_HSYNC_ACTIVE_LOW, // CfgLvdsMiscControl
+ CFG_LVDS_MISC_BLON_ACTIVE_LOW, // CfgLvdsMiscControl
+ CFG_LVDS_MISC_VOLT_OVERWRITE_ENABLE, // CfgLvdsMiscControl
+ }},
+ CFG_PCIE_REFCLK_SPREAD_SPECTRUM, // CfgPcieRefClkSpreadSpectrum
+ CFG_ENABLE_EXTERNAL_VREF, // CfgExternalVrefCtlFeature
+ CFG_FORCE_TRAIN_MODE, // CfgForceTrainMode
+ CFG_GNB_REMOTE_DISPLAY_SUPPORT, // CfgGnbRemoteDisplaySupport
+ (IOMMU_EXCLUSION_RANGE_DESCRIPTOR *) CFG_IOMMU_EXCLUSION_RANGE_LIST, // CfgIvrsExclusionRangeList
+ CFG_GNB_SYNCFLOOD_PIN_AS_NMI, // CfgGnbSyncFloodPinAsNmi
+ CFG_IGPU_ENABLE_DISABLE_POLICY, // CfgIgpuEnableDisablePolicy
+ CFG_GNB_THERMAL_SENSOR_CORRECTION, // CfgGnbSwTjOffset
+ CFG_LVDS_MISC_VOLT_ADJUSTMENT, // CfgLvdsMiscVoltAdjustment
+ {{
+ 0, // Reserved
+ CFG_DISPLAY_MISC_VBIOS_FAST_BOOT_ENABLE, // CfgDisplayMiscControl.VbiosFastBootEn
+ 0, // Reserved
+ }},
+ CFG_DP_FIXED_VOLT_SWING, // CfgDpFixedVoltSwingType
+ CFG_DIMM_TYPE_USED_IN_MIXED_CONFIG, // CfgDimmTypeUsedInMixedConfig
+ CFG_HYBRID_BOOST_ENABLE, // CfgHybridBoostEnable
+ CFG_GNB_IOAPIC_ADDRESS, // CfgGnbIoapicAddress
+ CFG_ENABLE_DATA_EYE, // CfgDataEyeEn
+ CFG_DOCKED_TDP_HEADROOM, // CfgDockedTdpHeadroom
+ CFG_DRAM_DOUBLE_REFRESH_RATE, // CfgDramDoubleRefreshRateEn
+ 0, //reserved...
+};
+
+CONST FUNCTION_PARAMS_INFO ROMDATA FuncParamsInfo[] =
+{
+ #if AGESA_ENTRY_INIT_RESET == TRUE
+ { AMD_INIT_RESET,
+ sizeof (AMD_RESET_PARAMS),
+ (PF_AGESA_FUNCTION) AmdInitResetConstructor,
+ (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+ AMD_INIT_RESET_HANDLE
+ },
+ #endif
+
+ #if AGESA_ENTRY_INIT_RECOVERY == TRUE
+ { AMD_INIT_RECOVERY,
+ sizeof (AMD_RECOVERY_PARAMS),
+ (PF_AGESA_FUNCTION) AmdInitRecoveryInitializer,
+ (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+ AMD_INIT_POST_HANDLE
+ },
+ #endif
+
+ #if AGESA_ENTRY_INIT_EARLY == TRUE
+ { AMD_INIT_EARLY,
+ sizeof (AMD_EARLY_PARAMS),
+ (PF_AGESA_FUNCTION) AmdInitEarlyInitializer,
+ (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+ AMD_INIT_EARLY_HANDLE
+ },
+ #endif
+
+ #if AGESA_ENTRY_INIT_ENV == TRUE
+ { AMD_INIT_ENV,
+ sizeof (AMD_ENV_PARAMS),
+ (PF_AGESA_FUNCTION) AmdInitEnvInitializer,
+ (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+ AMD_INIT_ENV_HANDLE
+ },
+ #endif
+
+ #if AGESA_ENTRY_INIT_LATE == TRUE
+ { AMD_INIT_LATE,
+ sizeof (AMD_LATE_PARAMS),
+ (PF_AGESA_FUNCTION) AmdInitLateInitializer,
+ (PF_AGESA_DESTRUCTOR) AmdInitLateDestructor,
+ AMD_INIT_LATE_HANDLE
+ },
+ #endif
+
+ #if AGESA_ENTRY_INIT_MID == TRUE
+ { AMD_INIT_MID,
+ sizeof (AMD_MID_PARAMS),
+ (PF_AGESA_FUNCTION) AmdInitMidInitializer,
+ (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+ AMD_INIT_MID_HANDLE
+ },
+ #endif
+
+ #if AGESA_ENTRY_INIT_POST == TRUE
+ { AMD_INIT_POST,
+ sizeof (AMD_POST_PARAMS),
+ (PF_AGESA_FUNCTION) AmdInitPostInitializer,
+ (PF_AGESA_DESTRUCTOR) AmdInitPostDestructor,
+ AMD_INIT_POST_HANDLE
+ },
+ #endif
+
+ #if AGESA_ENTRY_INIT_RESUME == TRUE
+ { AMD_INIT_RESUME,
+ sizeof (AMD_RESUME_PARAMS),
+ (PF_AGESA_FUNCTION) AmdInitResumeInitializer,
+ (PF_AGESA_DESTRUCTOR) AmdInitResumeDestructor,
+ AMD_INIT_RESUME_HANDLE
+ },
+ #endif
+
+ #if AGESA_ENTRY_INIT_LATE_RESTORE == TRUE
+ { AMD_S3LATE_RESTORE,
+ sizeof (AMD_S3LATE_PARAMS),
+ (PF_AGESA_FUNCTION) AmdS3LateRestoreInitializer,
+ (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+ AMD_S3_LATE_RESTORE_HANDLE
+ },
+ #endif
+
+ #if AGESA_ENTRY_INIT_S3SAVE == TRUE
+ { AMD_S3_SAVE,
+ sizeof (AMD_S3SAVE_PARAMS),
+ (PF_AGESA_FUNCTION) AmdS3SaveInitializer,
+ (PF_AGESA_DESTRUCTOR) AmdS3SaveDestructor,
+ AMD_S3_SAVE_HANDLE
+ },
+ #endif
+
+ #if AGESA_ENTRY_LATE_RUN_AP_TASK == TRUE
+ { AMD_LATE_RUN_AP_TASK,
+ sizeof (AP_EXE_PARAMS),
+ (PF_AGESA_FUNCTION) AmdLateRunApTaskInitializer,
+ (PF_AGESA_DESTRUCTOR) CommonReturnAgesaSuccess,
+ AMD_LATE_RUN_AP_TASK_HANDLE
+ },
+ #endif
+ { 0, 0, NULL, NULL, 0 }
+};
+
+CONST UINTN InitializerCount = ((sizeof (FuncParamsInfo)) / (sizeof (FuncParamsInfo[0])));
+
+CONST DISPATCH_TABLE ROMDATA DispatchTable[] =
+{
+ { AMD_CREATE_STRUCT, (IMAGE_ENTRY)AmdCreateStruct },
+ { AMD_RELEASE_STRUCT, (IMAGE_ENTRY)AmdReleaseStruct },
+
+ #if AGESA_ENTRY_INIT_RESET == TRUE
+ { AMD_INIT_RESET, (IMAGE_ENTRY)AmdInitReset },
+ #endif
+
+ #if AGESA_ENTRY_INIT_RECOVERY == TRUE
+ { AMD_INIT_RECOVERY, (IMAGE_ENTRY)AmdInitRecovery },
+ #endif
+
+ #if AGESA_ENTRY_INIT_EARLY == TRUE
+ { AMD_INIT_EARLY, (IMAGE_ENTRY)AmdInitEarly },
+ #endif
+
+ #if AGESA_ENTRY_INIT_POST == TRUE
+ { AMD_INIT_POST, (IMAGE_ENTRY)AmdInitPost },
+ #if OPTION_DATA_EYE == TRUE
+ { AMD_GET_2D_DATA_EYE, (IMAGE_ENTRY)AmdGet2DDataEye },
+ #endif
+ #endif
+
+ #if AGESA_ENTRY_INIT_ENV == TRUE
+ { AMD_INIT_ENV, (IMAGE_ENTRY)AmdInitEnv },
+ #endif
+
+ #if AGESA_ENTRY_INIT_MID == TRUE
+ { AMD_INIT_MID, (IMAGE_ENTRY)AmdInitMid },
+ #endif
+
+ #if AGESA_ENTRY_INIT_LATE == TRUE
+ { AMD_INIT_LATE, (IMAGE_ENTRY)AmdInitLate },
+ #endif
+
+ #if AGESA_ENTRY_INIT_S3SAVE == TRUE
+ { AMD_S3_SAVE, (IMAGE_ENTRY)AmdS3Save },
+ #endif
+
+ #if AGESA_ENTRY_INIT_RESUME == TRUE
+ { AMD_INIT_RESUME, (IMAGE_ENTRY)AmdInitResume },
+ #endif
+
+ #if AGESA_ENTRY_INIT_LATE_RESTORE == TRUE
+ { AMD_S3LATE_RESTORE, (IMAGE_ENTRY)AmdS3LateRestore },
+ #endif
+
+ #if AGESA_ENTRY_INIT_GENERAL_SERVICES == TRUE
+ { AMD_GET_APIC_ID, (IMAGE_ENTRY)AmdGetApicId },
+ { AMD_GET_PCI_ADDRESS, (IMAGE_ENTRY)AmdGetPciAddress },
+ { AMD_IDENTIFY_CORE, (IMAGE_ENTRY)AmdIdentifyCore },
+ { AMD_READ_EVENT_LOG, (IMAGE_ENTRY)AmdReadEventLog },
+ { AMD_IDENTIFY_DIMMS, (IMAGE_ENTRY)AmdIdentifyDimm },
+ { AMD_GET_EXECACHE_SIZE, (IMAGE_ENTRY)AmdGetAvailableExeCacheSize },
+ #endif
+
+ #if AGESA_ENTRY_LATE_RUN_AP_TASK == TRUE
+ { AMD_LATE_RUN_AP_TASK, (IMAGE_ENTRY)AmdLateRunApTask },
+ #endif
+ { 0, NULL }
+};
+
+CONST DISPATCH_TABLE ROMDATA ApDispatchTable[] =
+{
+ IDS_LATE_RUN_AP_TASK
+ // Get DMI info
+ CPU_DMI_AP_GET_TYPE4_TYPE7
+ // Probe filter enable
+ L3_FEAT_AP_DISABLE_CACHE
+ L3_FEAT_AP_ENABLE_CACHE
+ // Cpu Prefetch Mode
+ CPU_PREFETCH_MODE_AP_TASK
+ { 0, NULL }
+};
+
+#if AGESA_ENTRY_INIT_EARLY == TRUE
+ #if IDSOPT_IDS_ENABLED == TRUE
+ #if IDSOPT_TRACING_ENABLED == TRUE
+ #define MAKE_DBG_STR(x, y) MAKE_AS_A_STRING(x : y)
+ CONST CHAR8 *BldOptDebugOutput[] = {
+ #if IDS_TRACE_SHOW_BLD_OPT_CFG == TRUE
+ //Build Option Area
+ MAKE_DBG_STR (\nOptUDIMM, OPTION_UDIMMS)
+ MAKE_DBG_STR (\nOptRDIMM, OPTION_RDIMMS)
+ MAKE_DBG_STR (\nOptLRDIMM, OPTION_LRDIMMS)
+ MAKE_DBG_STR (\nOptECC, OPTION_ECC)
+ MAKE_DBG_STR (\nOptCsIntlv, OPTION_BANK_INTERLEAVE)
+ MAKE_DBG_STR (\nOptDctIntlv, OPTION_DCT_INTERLEAVE)
+ MAKE_DBG_STR (\nOptNodeIntlv, OPTION_NODE_INTERLEAVE)
+ //MAKE_DBG_STR (\nOptParallelTraining, OPTION_PARALLEL_TRAINING)
+ MAKE_DBG_STR (\nOptOnlineSpare, OPTION_ONLINE_SPARE)
+ MAKE_DBG_STR (\nOptAddr2CsTranslator, OPTION_ADDR_TO_CS_TRANSLATOR)
+ MAKE_DBG_STR (\nOptMemRestore, OPTION_MEM_RESTORE)
+ MAKE_DBG_STR (\nOptMultiSocket, OPTION_MULTISOCKET)
+ MAKE_DBG_STR (\nOptPstates, OPTION_ACPI_PSTATES)
+ MAKE_DBG_STR (\nOptSRAT, OPTION_SRAT)
+ MAKE_DBG_STR (\nOptSLIT, OPTION_SLIT)
+ MAKE_DBG_STR (\nOptWHEA, OPTION_WHEA)
+ MAKE_DBG_STR (\nOptDMI, OPTION_DMI)
+ MAKE_DBG_STR (\nOptEarlySamples, OPTION_EARLY_SAMPLES),
+
+ //Build Configuration Area
+ // CoreVrm
+ MAKE_DBG_STR (\nVrmCurrentLimit , CFG_VRM_CURRENT_LIMIT)
+ MAKE_DBG_STR (\nVrmLowPowerThreshold , CFG_VRM_LOW_POWER_THRESHOLD)
+ MAKE_DBG_STR (\nVrmSlewRate , CFG_VRM_SLEW_RATE)
+ MAKE_DBG_STR (\nVrmHiSpeedEnable , CFG_VRM_HIGH_SPEED_ENABLE)
+ MAKE_DBG_STR (\nVrmMaximumCurrentLimit, CFG_VRM_MAXIMUM_CURRENT_LIMIT)
+ MAKE_DBG_STR (\nVrmSviOcpLevel, CFG_VRM_SVI_OCP_LEVEL)
+ // NbVrm
+ MAKE_DBG_STR (\nNbVrmCurrentLimit , CFG_VRM_NB_CURRENT_LIMIT)
+ MAKE_DBG_STR (\nNbVrmLowPowerThreshold , CFG_VRM_NB_LOW_POWER_THRESHOLD)
+ MAKE_DBG_STR (\nNbVrmSlewRate , CFG_VRM_NB_SLEW_RATE)
+ MAKE_DBG_STR (\nNbVrmHiSpeedEnable , CFG_VRM_NB_HIGH_SPEED_ENABLE)
+ MAKE_DBG_STR (\nNbVrmMaximumCurrentLimit, CFG_VRM_NB_MAXIMUM_CURRENT_LIMIT),
+ MAKE_DBG_STR (\nNbVrmSviOcpLevel, CFG_VRM_NB_SVI_OCP_LEVEL)
+
+ MAKE_DBG_STR (\nNumIoApics , CFG_PLAT_NUM_IO_APICS)
+ MAKE_DBG_STR (\nMemInitPstate , CFG_MEM_INIT_PSTATE)
+ MAKE_DBG_STR (\nC1eMode , CFG_C1E_MODE)
+ MAKE_DBG_STR (\nC1eOpData , CFG_C1E_OPDATA)
+ MAKE_DBG_STR (\nC1eOpdata1 , CFG_C1E_OPDATA1)
+ MAKE_DBG_STR (\nC1eOpdata2 , CFG_C1E_OPDATA2)
+ MAKE_DBG_STR (\nC1eOpdata3 , CFG_C1E_OPDATA3)
+ MAKE_DBG_STR (\nCStateMode , CFG_CSTATE_MODE)
+ MAKE_DBG_STR (\nCStateOpData , CFG_CSTATE_OPDATA)
+ MAKE_DBG_STR (\nCStateIoBaseAddr , CFG_CSTATE_IO_BASE_ADDRESS)
+ MAKE_DBG_STR (\nCpbMode , CFG_CPB_MODE)
+ MAKE_DBG_STR (\nCoreLevelingMode , CFG_CORE_LEVELING_MODE),
+
+ MAKE_DBG_STR (\nControlFlowMode , CFG_PLATFORM_CONTROL_FLOW_MODE)
+ MAKE_DBG_STR (\nUseHtAssist , CFG_USE_HT_ASSIST)
+ MAKE_DBG_STR (\nUseAtmMode , CFG_USE_ATM_MODE)
+ MAKE_DBG_STR (\nUse32ByteRefresh , CFG_USE_32_BYTE_REFRESH)
+ MAKE_DBG_STR (\nUseVarMctIsocPriority , CFG_USE_VARIABLE_MCT_ISOC_PRIORITY)
+ MAKE_DBG_STR (\nPowerPolicy , CFG_PLATFORM_POWER_POLICY_MOD)
+
+ MAKE_DBG_STR (\nDeemphasisList , CFG_PLATFORM_DEEMPHASIS_LIST)
+
+ MAKE_DBG_STR (\nPciMmioAddr , CFG_PCI_MMIO_BASE)
+ MAKE_DBG_STR (\nPciMmioSize , CFG_PCI_MMIO_SIZE)
+ MAKE_DBG_STR (\nPlatformType , CFG_AMD_PLATFORM_TYPE)
+ MAKE_DBG_STR (\nPowerCeiling , CFG_AMD_POWER_CEILING),
+ MAKE_DBG_STR (\nHtcTempLimit , CFG_HTC_TEMPERATURE_LIMIT)
+ MAKE_DBG_STR (\nLhtcTempLimit , CFG_LHTC_TEMPERATURE_LIMIT)
+
+ MAKE_DBG_STR (\nMemBusFreqLimit , CFG_MEMORY_BUS_FREQUENCY_LIMIT)
+ MAKE_DBG_STR (\nTimingModeSelect , CFG_TIMING_MODE_SELECT)
+ MAKE_DBG_STR (\nMemoryClockSelect , CFG_MEMORY_CLOCK_SELECT)
+
+ MAKE_DBG_STR (\nMemUnganged , CFG_MEMORY_MODE_UNGANGED)
+ MAKE_DBG_STR (\nQRCap , CFG_MEMORY_QUAD_RANK_CAPABLE)
+ MAKE_DBG_STR (\nQRType , CFG_MEMORY_QUADRANK_TYPE)
+ MAKE_DBG_STR (\nRDimmCap , CFG_MEMORY_RDIMM_CAPABLE)
+ MAKE_DBG_STR (\nLRDimmCap , CFG_MEMORY_LRDIMM_CAPABLE)
+ MAKE_DBG_STR (\nUDimmCap , CFG_MEMORY_UDIMM_CAPABLE)
+ MAKE_DBG_STR (\nSODimmCap , CFG_MEMORY_SODIMM_CAPABLE)
+ MAKE_DBG_STR (\nDqsTrainingControl , CFG_DQS_TRAINING_CONTROL)
+ MAKE_DBG_STR (\nIgnoreSpdChecksum , CFG_IGNORE_SPD_CHECKSUM)
+ MAKE_DBG_STR (\nUseBurstMode , CFG_USE_BURST_MODE)
+ MAKE_DBG_STR (\nAllMemClkOn , CFG_MEMORY_ALL_CLOCKS_ON),
+
+ MAKE_DBG_STR (\nPowerDownEn , CFG_MEMORY_POWER_DOWN)
+ MAKE_DBG_STR (\nPowerDownMode , CFG_POWER_DOWN_MODE)
+ MAKE_DBG_STR (\nOnlineSpare , CFG_ONLINE_SPARE)
+ MAKE_DBG_STR (\nAddrParityEn , CFG_MEMORY_PARITY_ENABLE)
+ MAKE_DBG_STR (\nBankSwizzle , CFG_BANK_SWIZZLE)
+ MAKE_DBG_STR (\nLimitBelow1TB , CFG_LIMIT_MEMORY_TO_BELOW_1TB)
+ MAKE_DBG_STR (\nCsIntlvEn , CFG_MEMORY_ENABLE_BANK_INTERLEAVING)
+ MAKE_DBG_STR (\nNodeIntlvEn , CFG_MEMORY_ENABLE_NODE_INTERLEAVING)
+ MAKE_DBG_STR (\nDctIntlvEn , CFG_MEMORY_CHANNEL_INTERLEAVING),
+
+ MAKE_DBG_STR (\nUmaMode , CFG_UMA_MODE)
+ MAKE_DBG_STR (\nUmaSize , CFG_UMA_SIZE)
+ MAKE_DBG_STR (\nUmaAbove4G , CFG_UMA_ABOVE4G)
+ MAKE_DBG_STR (\nUmaAlignment , CFG_UMA_ALIGNMENT)
+
+ MAKE_DBG_STR (\nEccEn , CFG_ENABLE_ECC_FEATURE)
+ MAKE_DBG_STR (\nEccRedirect , CFG_ECC_REDIRECTION)
+ MAKE_DBG_STR (\nScrubDramRate , CFG_SCRUB_DRAM_RATE)
+ MAKE_DBG_STR (\nScrubL2Rate , CFG_SCRUB_L2_RATE)
+ MAKE_DBG_STR (\nScrubL3Rate , CFG_SCRUB_L3_RATE)
+ MAKE_DBG_STR (\nScrubIcRate , CFG_SCRUB_IC_RATE)
+ MAKE_DBG_STR (\nScrubDcRate , CFG_SCRUB_DC_RATE)
+ MAKE_DBG_STR (\nEccSyncFlood , CFG_ECC_SYNC_FLOOD)
+ MAKE_DBG_STR (\nEccSymbolSize , CFG_ECC_SYMBOL_SIZE)
+ MAKE_DBG_STR (\nHeapDramAddress , CFG_HEAP_DRAM_ADDRESS)
+ MAKE_DBG_STR (\nNodeMem1GBAlign , CFG_1GB_ALIGN),
+
+ MAKE_DBG_STR (\nS3LateRestore , CFG_S3_LATE_RESTORE)
+ MAKE_DBG_STR (\nAcpiPstateIndependent , CFG_ACPI_PSTATE_PSD_INDPX)
+ MAKE_DBG_STR (\nAcpiPstatesPsdPolicy , CFG_ACPI_PSTATES_PSD_POLICY)
+
+ MAKE_DBG_STR (\nApMtrrSettingsList , CFG_AP_MTRR_SETTINGS_LIST)
+
+ MAKE_DBG_STR (\nProcessorScopeInSb , CFG_PROCESSOR_SCOPE_IN_SB)
+ MAKE_DBG_STR (\nProcessorScopeName0 , CFG_PROCESSOR_SCOPE_NAME0)
+ MAKE_DBG_STR (\nProcessorScopeName1 , CFG_PROCESSOR_SCOPE_NAME1)
+ MAKE_DBG_STR (\nGnbHdAudio , CFG_GNB_HD_AUDIO)
+ MAKE_DBG_STR (\nAbmSupport , CFG_ABM_SUPPORT)
+ MAKE_DBG_STR (\nDynamicRefreshRate , CFG_DYNAMIC_REFRESH_RATE)
+ MAKE_DBG_STR (\nLcdBackLightControl , CFG_LCD_BACK_LIGHT_CONTROL)
+ MAKE_DBG_STR (\nGnb3dStereoPinIndex , CFG_GNB_STEREO_3D_PINOUT)
+ MAKE_DBG_STR (\nTempPcieMmioBaseAddress, CFG_TEMP_PCIE_MMIO_BASE_ADDRESS),
+ MAKE_DBG_STR (\nCfgGnbIGPUSSID , CFG_GNB_IGPU_SSID)
+ MAKE_DBG_STR (\nCfgGnbHDAudioSSID , CFG_GNB_HDAUDIO_SSID)
+ MAKE_DBG_STR (\nCfgGnbPcieSSID , CFG_GNB_PCIE_SSID)
+ MAKE_DBG_STR (\nCfgIommuSupport , CFG_IOMMU_SUPPORT)
+ MAKE_DBG_STR (\nCfgLvdsSpreadSpectrum , CFG_GFX_LVDS_SPREAD_SPECTRUM)
+ MAKE_DBG_STR (\nCfgLvdsSpreadSpectrumRate , CFG_GFX_LVDS_SPREAD_SPECTRUM_RATE)
+ MAKE_DBG_STR (\nCfgLvdsPowerOnSeqDigonToDe , CFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE)
+ MAKE_DBG_STR (\nCfgLvdsPowerOnSeqDeToVaryBl , CFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL)
+ MAKE_DBG_STR (\nCfgLvdsPowerOnSeqDeToDigon , CFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON)
+ MAKE_DBG_STR (\nCfgLvdsPowerOnSeqVaryBlToDe , CFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE)
+ MAKE_DBG_STR (\nCfgLvdsPowerOnSeqOnToOffDelay , CFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY)
+ MAKE_DBG_STR (\nCfgLvdsPowerOnSeqVaryBlToBlon , CFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON)
+ MAKE_DBG_STR (\nCfgLvdsPowerOnSeqBlonToVaryBl , CFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL)
+ MAKE_DBG_STR (\nCfgLvdsMaxPixelClockFreq , CFG_LVDS_MAX_PIXEL_CLOCK_FREQ)
+ MAKE_DBG_STR (\nCfgLcdBitDepthControlValue , CFG_LCD_BIT_DEPTH_CONTROL_VALUE)
+ MAKE_DBG_STR (\nCfgLvds24bbpPanelMode , CFG_LVDS_24BBP_PANEL_MODE),
+ MAKE_DBG_STR (\nCfgLvdsMiscControl.FpdiMode , CFG_LVDS_MISC_888_FPDI_MODE),
+ MAKE_DBG_STR (\nCfgLvdsMiscControl.DlChSwap , CFG_LVDS_MISC_DL_CH_SWAP),
+ MAKE_DBG_STR (\nCfgLvdsMiscControl.VsyncActiveLow , CFG_LVDS_MISC_VSYNC_ACTIVE_LOW),
+ MAKE_DBG_STR (\nCfgLvdsMiscControl.HsyncActiveLow , CFG_LVDS_MISC_HSYNC_ACTIVE_LOW),
+ MAKE_DBG_STR (\nCfgLvdsMiscControl.BLONActiveLow , CFG_LVDS_MISC_BLON_ACTIVE_LOW),
+ MAKE_DBG_STR (\nCfgPcieRefClkSpreadSpectrum , CFG_PCIE_REFCLK_SPREAD_SPECTRUM),
+ MAKE_DBG_STR (\nCfgExtVref , CFG_ENABLE_EXTERNAL_VREF),
+ MAKE_DBG_STR (\nCfgForceTrainMode , CFG_FORCE_TRAIN_MODE),
+ MAKE_DBG_STR (\nCfgGnbRemoteDisplaySupport , CFG_GNB_REMOTE_DISPLAY_CONFIG),
+ MAKE_DBG_STR (\nCfgIvrsExclusionRangeList , CFG_IOMMU_EXCLUSION_RANGE_LIST),
+ MAKE_DBG_STR (\nCfgGnbSyncFloodPinAsNmi , CFG_GNB_SYNCFLOOD_PIN_AS_NMI),
+ MAKE_DBG_STR (\nCfgIgpuEnableDisablePolicy , CFG_IGPU_ENABLE_DISABLE_POLICY),
+ MAKE_DBG_STR (\nCfgGnbSwTjOffset , CFG_GNB_THERMAL_SENSOR_CORRECTION),
+ MAKE_DBG_STR (\nCfgDisplayMiscControl.VbiosFastBootEn , CFG_DISPLAY_MISC_VBIOS_FAST_BOOT_ENABLE),
+ MAKE_DBG_STR (\nCfgDimmTypeUsedInMixedConfig , CFG_DIMM_TYPE_USED_IN_MIXED_CONFIG),
+ MAKE_DBG_STR (\nCfgDataEyeEn , CFG_ENABLE_DATA_EYE),
+ MAKE_DBG_STR (\nCfgDramDoubleRefreshRateEn , CFG_DRAM_DOUBLE_REFRESH_RATE),
+ #endif
+ NULL
+ };
+ #endif
+ #endif
+#endif
+
+// Needed for floating point support, linker expects this symbol to be defined.
+#if (OPTION_CPU_SCS == TRUE) || (CFG_GNB_BAPM_SUPPORT == TRUE)
+ CONST INT32 _fltused = 0;
+#endif
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/PlatformMemoryConfiguration.h b/src/vendorcode/amd/agesa/f16kb/Include/PlatformMemoryConfiguration.h
new file mode 100644
index 0000000..4ab6a0c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/PlatformMemoryConfiguration.h
@@ -0,0 +1,516 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Platform Specific Memory Configuration
+ *
+ * Contains Definitions and Macros for control of AGESA Memory code on a per platform basis
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: OPTION
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _PLATFORM_MEMORY_CONFIGURATION_H_
+#define _PLATFORM_MEMORY_CONFIGURATION_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+#ifndef PSO_ENTRY
+ #define PSO_ENTRY UINT8
+#endif
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------------------
+ * PLATFORM SPECIFIC MEMORY DEFINITIONS
+ *----------------------------------------------------------------------------------------
+ */
+///
+/// Memory Speed and DIMM Population Masks
+///
+///< DDR Speed Masks
+///< Specifies the DDR Speed on a memory channel
+///
+#define ANY_SPEED 0xFFFFFFFFul
+#define DDR400 ((UINT32) 1 << (DDR400_FREQUENCY / 66))
+#define DDR533 ((UINT32) 1 << (DDR533_FREQUENCY / 66))
+#define DDR667 ((UINT32) 1 << (DDR667_FREQUENCY / 66))
+#define DDR800 ((UINT32) 1 << (DDR800_FREQUENCY / 66))
+#define DDR1066 ((UINT32) 1 << (DDR1066_FREQUENCY / 66))
+#define DDR1333 ((UINT32) 1 << (DDR1333_FREQUENCY / 66))
+#define DDR1600 ((UINT32) 1 << (DDR1600_FREQUENCY / 66))
+#define DDR1866 ((UINT32) 1 << (DDR1866_FREQUENCY / 66))
+#define DDR2133 ((UINT32) 1 << (DDR2133_FREQUENCY / 66))
+#define DDR2400 ((UINT32) 1 << (DDR2400_FREQUENCY / 66))
+///
+///< DIMM POPULATION MASKS
+///< Specifies the DIMM Population on a channel (can be added together to specify configuration).
+///< ex. SR_DIMM0 + SR_DIMM1 : Single Rank Dimm in slot 0 AND Slot 1
+///< SR_DIMM0 + DR_DIMM0 + SR_DIMM1 +DR_DIMM1 : Single OR Dual rank in Slot 0 AND Single OR Dual rank in Slot 1
+///
+#define ANY_ 0xFF ///< Any dimm configuration the current channel
+#define SR_DIMM0 0x0001 ///< Single rank dimm in slot 0 on the current channel
+#define SR_DIMM1 0x0010 ///< Single rank dimm in slot 1 on the current channel
+#define SR_DIMM2 0x0100 ///< Single rank dimm in slot 2 on the current channel
+#define SR_DIMM3 0x1000 ///< Single rank dimm in slot 3 on the current channel
+#define DR_DIMM0 0x0002 ///< Dual rank dimm in slot 0 on the current channel
+#define DR_DIMM1 0x0020 ///< Dual rank dimm in slot 1 on the current channel
+#define DR_DIMM2 0x0200 ///< Dual rank dimm in slot 2 on the current channel
+#define DR_DIMM3 0x2000 ///< Dual rank dimm in slot 3 on the current channel
+#define QR_DIMM0 0x0004 ///< Quad rank dimm in slot 0 on the current channel
+#define QR_DIMM1 0x0040 ///< Quad rank dimm in slot 1 on the current channel
+#define QR_DIMM2 0x0400 ///< Quad rank dimm in slot 2 on the current channel
+#define QR_DIMM3 0x4000 ///< Quad rank dimm in slot 3 on the current channel
+#define LR_DIMM0 0x0001 ///< Lrdimm in slot 0 on the current channel
+#define LR_DIMM1 0x0010 ///< Lrdimm in slot 1 on the current channel
+#define LR_DIMM2 0x0100 ///< Lrdimm in slot 2 on the current channel
+#define LR_DIMM3 0x1000 ///< Lrdimm in slot 3 on the current channel
+#define ANY_DIMM0 0x000F ///< Any Dimm combination in slot 0 on the current channel
+#define ANY_DIMM1 0x00F0 ///< Any Dimm combination in slot 1 on the current channel
+#define ANY_DIMM2 0x0F00 ///< Any Dimm combination in slot 2 on the current channel
+#define ANY_DIMM3 0xF000 ///< Any Dimm combination in slot 3 on the current channel
+///
+///< CS POPULATION MASKS
+///< Specifies the CS Population on a channel (can be added together to specify configuration).
+///< ex. CS0 + CS1 : CS0 and CS1 apply to the setting
+///
+#define CS_ANY_ 0xFF ///< Any CS configuration
+#define CS0_ 0x01 ///< CS0 bit map mask
+#define CS1_ 0x02 ///< CS1 bit map mask
+#define CS2_ 0x04 ///< CS2 bit map mask
+#define CS3_ 0x08 ///< CS3 bit map mask
+#define CS4_ 0x10 ///< CS4 bit map mask
+#define CS5_ 0x20 ///< CS5 bit map mask
+#define CS6_ 0x40 ///< CS6 bit map mask
+#define CS7_ 0x80 ///< CS7 bit map mask
+///
+///< Number of Dimms on the current channel
+///< This is a mask used to indicate the number of dimms in a channel
+///< They can be added to indicate multiple conditions (i.e 1 OR 2 Dimms)
+///
+#define ANY_NUM 0xFF ///< Any number of Dimms
+#define NO_DIMM 0x00 ///< No Dimms present
+#define ONE_DIMM 0x01 ///< One dimm Poulated on the current channel
+#define TWO_DIMM 0x02 ///< Two dimms Poulated on the current channel
+#define THREE_DIMM 0x04 ///< Three dimms Poulated on the current channel
+#define FOUR_DIMM 0x08 ///< Four dimms Poulated on the current channel
+
+///
+///< DIMM VOLTAGE MASKS
+///
+#define VOLT_ANY_ 0xFF ///< Any voltage configuration
+#define VOLT1_5_ 0x01 ///< Voltage 1.5V bit map mask
+#define VOLT1_35_ 0x02 ///< Voltage 1.35V bit map mask
+#define VOLT1_25_ 0x04 ///< Voltage 1.25V bit map mask
+
+//
+// < Not applicable
+//
+#define NA_ 0 ///< Not applicable
+
+/*----------------------------------------------------------------------------------------
+ *
+ * Platform Specific Override Definitions for Socket, Channel and Dimm
+ * This indicates where a platform override will be applied.
+ *
+ *----------------------------------------------------------------------------------------
+ */
+///
+///< SOCKET MASKS
+///< Indicates associated processor sockets to apply override settings
+///
+#define ANY_SOCKET 0xFF ///< Apply to all sockets
+#define SOCKET0 0x01 ///< Apply to socket 0
+#define SOCKET1 0x02 ///< Apply to socket 1
+#define SOCKET2 0x04 ///< Apply to socket 2
+#define SOCKET3 0x08 ///< Apply to socket 3
+#define SOCKET4 0x10 ///< Apply to socket 4
+#define SOCKET5 0x20 ///< Apply to socket 5
+#define SOCKET6 0x40 ///< Apply to socket 6
+#define SOCKET7 0x80 ///< Apply to socket 7
+///
+///< CHANNEL MASKS
+///< Indicates Memory channels where override should be applied
+///
+#define ANY_CHANNEL 0xFF ///< Apply to all Memory channels
+#define CHANNEL_A 0x01 ///< Apply to Channel A
+#define CHANNEL_B 0x02 ///< Apply to Channel B
+#define CHANNEL_C 0x04 ///< Apply to Channel C
+#define CHANNEL_D 0x08 ///< Apply to Channel D
+///
+/// DIMM MASKS
+/// Indicates Dimm Slots where override should be applied
+///
+#define ALL_DIMMS 0xFF ///< Apply to all dimm slots
+#define DIMM0 0x01 ///< Apply to Dimm Slot 0
+#define DIMM1 0x02 ///< Apply to Dimm Slot 1
+#define DIMM2 0x04 ///< Apply to Dimm Slot 2
+#define DIMM3 0x08 ///< Apply to Dimm Slot 3
+///
+/// REGISTER ACCESS MASKS
+/// Not supported as an at this time
+///
+#define ACCESS_NB0 0x0
+#define ACCESS_NB1 0x1
+#define ACCESS_NB2 0x2
+#define ACCESS_NB3 0x3
+#define ACCESS_NB4 0x4
+#define ACCESS_PHY 0x5
+#define ACCESS_DCT_XT 0x6
+///
+/// MOTHER BOARD DESIGN LAYERS MASKS
+/// Indicates the layer design of mother board
+///
+#define LAYERS_4 0x0
+#define LAYERS_6 0x1
+/*----------------------------------------------------------------------------------------
+ *
+ * Platform Specific Overriding Table Definitions
+ *
+ *----------------------------------------------------------------------------------------
+ */
+
+#define PSO_END 0 ///< Table End
+#define PSO_CKE_TRI 1 ///< CKE Tristate Map
+#define PSO_ODT_TRI 2 ///< ODT Tristate Map
+#define PSO_CS_TRI 3 ///< CS Tristate Map
+#define PSO_MAX_DIMMS 4 ///< Max Dimms per channel
+#define PSO_CLK_SPEED 5 ///< Clock Speed
+#define PSO_DIMM_TYPE 6 ///< Dimm Type
+#define PSO_MEMCLK_DIS 7 ///< MEMCLK Disable Map
+#define PSO_MAX_CHNLS 8 ///< Max Channels per Socket
+#define PSO_BUS_SPEED 9 ///< Max Memory Bus Speed
+#define PSO_MAX_CHIPSELS 10 ///< Max Chipsel per Channel
+#define PSO_MEM_TECH 11 ///< Channel Memory Type
+#define PSO_WL_SEED 12 ///< DDR3 Write Levelization Seed delay
+#define PSO_RXEN_SEED 13 ///< Hardwared based RxEn seed
+#define PSO_NO_LRDIMM_CS67_ROUTING 14 ///< CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs
+#define PSO_SOLDERED_DOWN_SODIMM_TYPE 15 ///< Soldered down SODIMM type
+#define PSO_LVDIMM_VOLT1_5_SUPPORT 16 ///< Force LvDimm voltage to 1.5V
+#define PSO_MIN_RD_WR_DATAEYE_WIDTH 17 ///< Min RD/WR dataeye width
+#define PSO_CPU_FAMILY_TO_OVERRIDE 18 ///< CPU family signature to tell following PSO macros are CPU family dependent
+#define PSO_MAX_SOLDERED_DOWN_DIMMS 19 ///< Max Soldered-down Dimms per channel
+#define PSO_MEMORY_POWER_POLICY 20 ///< Memory power policy override
+#define PSO_MOTHER_BOARD_LAYERS 21 ///< Mother board layer design
+
+/*----------------------------------
+ * CONDITIONAL PSO SPECIFIC ENTRIES
+ *---------------------------------*/
+// Condition Types
+#define CONDITIONAL_PSO_MIN 100 ///< Start of Conditional Entry Types
+#define PSO_CONDITION_AND 100 ///< And Block - Start of Conditional block
+#define PSO_CONDITION_LOC 101 ///< Location - Specify Socket, Channel, Dimms to be affected
+#define PSO_CONDITION_SPD 102 ///< SPD - Specify a specific SPD value on a Dimm on the channel
+#define PSO_CONDITION_REG 103 // Reserved
+#define PSO_CONDITION_MAX 103 ///< End Of Condition Entry Types
+// Action Types
+#define PSO_ACTION_MIN 120 ///< Start of Action Entry Types
+#define PSO_ACTION_ODT 120 ///< ODT values to override
+#define PSO_ACTION_ADDRTMG 121 ///< Address/Timing values to override
+#define PSO_ACTION_ODCCONTROL 122 ///< ODC Control values to override
+#define PSO_ACTION_SLEWRATE 123 ///< Slew Rate value to override
+#define PSO_ACTION_REG 124 // Reserved
+#define PSO_ACTION_SPEEDLIMIT 125 ///< Memory Bus speed Limit based on configuration
+#define PSO_ACTION_MAX 125 ///< End of Action Entry Types
+#define CONDITIONAL_PSO_MAX 139 ///< End of Conditional Entry Types
+
+/*----------------------------------
+ * TABLE DRIVEN PSO SPECIFIC ENTRIES
+ *---------------------------------*/
+// Condition descriptor
+#define PSO_TBLDRV_CONFIG 200 ///< Configuration Descriptor
+
+// Overriding entry types
+#define PSO_TBLDRV_START 210 ///< Start of Table Driven Overriding Entry Types
+#define PSO_TBLDRV_SPEEDLIMIT 210 ///< Speed Limit
+#define PSO_TBLDRV_ODT_RTTNOM 211 ///< RttNom
+#define PSO_TBLDRV_ODT_RTTWR 212 ///< RttWr
+#define PSO_TBLDRV_ODTPATTERN 213 ///< Odt Patterns
+#define PSO_TBLDRV_ADDRTMG 214 ///< Address/Timing values
+#define PSO_TBLDRV_ODCCTRL 215 ///< ODC Control values
+#define PSO_TBLDRV_SLOWACCMODE 216 ///< Slow Access Mode
+#define PSO_TBLDRV_MR0_CL 217 ///< MR0[CL]
+#define PSO_TBLDRV_MR0_WR 218 ///< MR0[WR]
+#define PSO_TBLDRV_RC2_IBT 219 ///< RC2[IBT]
+#define PSO_TBLDRV_RC10_OPSPEED 220 ///< RC10[Opearting Speed]
+#define PSO_TBLDRV_LRDIMM_IBT 221 ///< LrDIMM IBT
+#define PSO_TBLDRV_2D_TRAINING 222 ///< 2D training
+#define PSO_TBLDRV_INVALID_TYPE 223 ///< Invalid Type
+#define PSO_TBLDRV_END 223 ///< End of Table Driven Overriding Entry Types
+
+/*----------------------------------------------------------------------------------------
+ * CONDITIONAL OVERRIDE TABLE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+#define CPU_FAMILY_TO_OVERRIDE(CpuFamilyRevision) \
+ PSO_CPU_FAMILY_TO_OVERRIDE, 4, \
+ ((CpuFamilyRevision) & 0x0FF), (((CpuFamilyRevision) >> 8)& 0x0FF), (((CpuFamilyRevision) >> 16)& 0x0FF), (((CpuFamilyRevision) >> 24)& 0x0FF)
+
+#define MEMCLK_DIS_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \
+ PSO_MEMCLK_DIS, 11, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map \
+ , Bit7Map
+
+#define CKE_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map) \
+ PSO_CKE_TRI, 7, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map
+
+#define ODT_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map) \
+ PSO_ODT_TRI, 7, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map
+
+#define CS_TRI_MAP(SocketID, ChannelID, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map) \
+ PSO_CS_TRI, 11, SocketID, ChannelID, ALL_DIMMS, Bit0Map, Bit1Map, Bit2Map, Bit3Map, Bit4Map, Bit5Map, Bit6Map, Bit7Map
+
+#define NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) \
+ PSO_MAX_DIMMS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfDimmSlotsPerChannel
+
+#define NUMBER_OF_SOLDERED_DOWN_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfSolderedDownDimmsPerChannel) \
+ PSO_MAX_SOLDERED_DOWN_DIMMS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfSolderedDownDimmsPerChannel
+
+#define NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) \
+ PSO_MAX_CHIPSELS, 4, SocketID, ChannelID, ALL_DIMMS, NumberOfChipSelectsPerChannel
+
+#define NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) \
+ PSO_MAX_CHNLS, 4, SocketID, ANY_CHANNEL, ALL_DIMMS, NumberOfChannelsPerSocket
+
+#define OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, TimingMode, BusSpeed) \
+ PSO_BUS_SPEED, 11, SocketID, ChannelID, ALL_DIMMS, TimingMode, (TimingMode >> 8), (TimingMode >> 16), (TimingMode >> 24), \
+ BusSpeed, (BusSpeed >> 8), (BusSpeed >> 16), (BusSpeed >> 24)
+
+#define DRAM_TECHNOLOGY(SocketID, MemTechType) \
+ PSO_MEM_TECH, 7, SocketID, ANY_CHANNEL, ALL_DIMMS, MemTechType, (MemTechType >> 8), (MemTechType >> 16), (MemTechType >> 24)
+
+#define WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \
+ Byte6Seed, Byte7Seed, ByteEccSeed) \
+ PSO_WL_SEED, 12, SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \
+ Byte6Seed, Byte7Seed, ByteEccSeed
+
+#define HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, \
+ Byte6Seed, Byte7Seed, ByteEccSeed) \
+ PSO_RXEN_SEED, 21, SocketID, ChannelID, DimmID, Byte0Seed, (Byte0Seed >> 8), Byte1Seed, (Byte1Seed >> 8), Byte2Seed, (Byte2Seed >> 8), \
+ Byte3Seed, (Byte3Seed >> 8), Byte4Seed, (Byte4Seed >> 8), Byte5Seed, (Byte5Seed >> 8), Byte6Seed, (Byte6Seed >> 8), \
+ Byte7Seed, (Byte7Seed >> 8), ByteEccSeed, (ByteEccSeed >> 8)
+
+#define NO_LRDIMM_CS67_ROUTING(SocketID, ChannelID) \
+ PSO_NO_LRDIMM_CS67_ROUTING, 4, SocketID, ChannelID, ALL_DIMMS, TRUE
+
+#define SOLDERED_DOWN_SODIMM_TYPE(SocketID, ChannelID) \
+ PSO_SOLDERED_DOWN_SODIMM_TYPE, 4, SocketID, ChannelID, ALL_DIMMS, TRUE
+
+#define LVDIMM_FORCE_VOLT1_5_FOR_D0 \
+ PSO_LVDIMM_VOLT1_5_SUPPORT, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, TRUE
+
+#define MIN_RD_WR_DATAEYE_WIDTH(SocketID, ChannelID, MinRdDataeyeWidth, MinWrDataeyeWidth) \
+ PSO_MIN_RD_WR_DATAEYE_WIDTH, 5, SocketID, ChannelID, ALL_DIMMS, MinRdDataeyeWidth, MinWrDataeyeWidth
+
+#define MEMORY_POWER_POLICY_OVERRIDE(PowerPolicy) \
+ PSO_MEMORY_POWER_POLICY, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, PowerPolicy
+
+#define MOTHER_BOARD_LAYERS(Layers) \
+ PSO_MOTHER_BOARD_LAYERS, 4, ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, Layers
+
+/*----------------------------------------------------------------------------------------
+ * CONDITIONAL OVERRIDE TABLE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+#define CONDITION_AND \
+ PSO_CONDITION_AND, 0
+
+#define COND_LOC(SocketMsk, ChannelMsk, DimmMsk) \
+ PSO_CONDITION_LOC, 3, SocketMsk, ChannelMsk, DimmMsk
+
+#define COND_SPD(Byte, Mask, Value) \
+ PSO_CONDITION_SPD, 3, Byte, Mask, Value
+
+#define COND_REG(Access, Offset, Mask, Value) \
+ PSO_CONDITION_REG, 11, Access, (Offset & 0x0FF), (Offset >> 8), \
+ ((Mask) & 0x0FF), (((Mask) >> 8) & 0x0FF), (((Mask) >> 16) & 0x0FF), (((Mask) >> 24) & 0x0FF), \
+ ((Value) & 0x0FF), (((Value) >> 8) & 0x0FF), (((Value) >> 16) & 0x0FF), (((Value) >> 24) & 0x0FF)
+
+#define ACTION_ODT(Frequency, Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt) \
+ PSO_ACTION_ODT, 9, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), ((Frequency >> 24)& 0x0FF), \
+ Dimms, QrDimms, DramOdt, QrDramOdt, DramDynOdt
+
+#define ACTION_ADDRTMG(Frequency, DimmConfig, AddrTmg) \
+ PSO_ACTION_ADDRTMG, 10, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+ ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \
+ (AddrTmg & 0x0FF), ((AddrTmg >> 8)& 0x0FF), ((AddrTmg >> 16)& 0x0FF), ((AddrTmg >> 24)& 0x0FF)
+
+#define ACTION_ODCCTRL(Frequency, DimmConfig, OdcCtrl) \
+ PSO_ACTION_ODCCONTROL, 10, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+ ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \
+ (OdcCtrl & 0x0FF), ((OdcCtrl >> 8)& 0x0FF), ((OdcCtrl >> 16)& 0x0FF), ((OdcCtrl >> 24)& 0x0FF)
+
+#define ACTION_SLEWRATE(Frequency, DimmConfig, SlewRate) \
+ PSO_ACTION_SLEWRATE, 10, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+ ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \
+ (SlewRate & 0x0FF), ((SlewRate >> 8)& 0x0FF), ((SlewRate >> 16)& 0x0FF), ((SlewRate >> 24)& 0x0FF)
+
+#define ACTION_SPEEDLIMIT(DimmConfig, Dimms, SpeedLimit15, SpeedLimit135, SpeedLimit125) \
+ PSO_ACTION_SPEEDLIMIT, 9, \
+ ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), Dimms, \
+ (SpeedLimit15 & 0x0FF), ((SpeedLimit15 >> 8)& 0x0FF), \
+ (SpeedLimit135 & 0x0FF), ((SpeedLimit135 >> 8)& 0x0FF), \
+ (SpeedLimit125 & 0x0FF), ((SpeedLimit125 >> 8)& 0x0FF)
+
+/*----------------------------------------------------------------------------------------
+ * END OF CONDITIONAL OVERRIDE TABLE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------------------
+ * TABLE DRIVEN OVERRIDE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+/// Configuration sub-descriptors
+typedef enum {
+ CONFIG_GENERAL, ///< CONFIG_GENERAL
+ CONFIG_SPEEDLIMIT, ///< CONFIG_SPEEDLIMIT
+ CONFIG_RC2IBT, ///< CONFIG_RC2IBT
+ CONFIG_DONT_CARE, ///< CONFIG_DONT_CARE
+} Config_Type;
+
+// ====================
+// Configuration Macros
+// ====================
+#define TBLDRV_CONFIG_TO_OVERRIDE(DimmPerCH, Frequency, DimmVolt, DimmConfig) \
+ PSO_TBLDRV_CONFIG, 9, \
+ CONFIG_GENERAL, \
+ DimmPerCH, DimmVolt, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+ ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF)
+
+#define TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE(DimmPerCH, Dimms, NumOfSR, NumOfDR, NumOfQR, NumOfLRDimm) \
+ PSO_TBLDRV_CONFIG, 7, \
+ CONFIG_SPEEDLIMIT, \
+ DimmPerCH, Dimms, NumOfSR, NumOfDR, NumOfQR, NumOfLRDimm
+
+#define TBLDRV_RC2IBT_CONFIG_TO_OVERRIDE(DimmPerCH, Frequency, DimmVolt, DimmConfig, NumOfReg) \
+ PSO_TBLDRV_CONFIG, 10, \
+ CONFIG_RC2IBT, \
+ DimmPerCH, DimmVolt, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+ ((DimmConfig) & 0x0FF), (((DimmConfig) >> 8) & 0x0FF), \
+ NumOfReg
+
+//==================
+// Overriding Macros
+//==================
+#define TBLDRV_CONFIG_ENTRY_SPEEDLIMIT(SpeedLimit1_5, SpeedLimit1_35, SpeedLimit1_25) \
+ PSO_TBLDRV_SPEEDLIMIT, 6, \
+ (SpeedLimit1_5 & 0x0FF), ((SpeedLimit1_5 >> 8)& 0x0FF), \
+ (SpeedLimit1_35 & 0x0FF), ((SpeedLimit1_35 >> 8)& 0x0FF), \
+ (SpeedLimit1_25 & 0x0FF), ((SpeedLimit1_25 >> 8)& 0x0FF)
+
+#define TBLDRV_CONFIG_ENTRY_ODT_RTTNOM(TgtCS, RttNom) \
+ PSO_TBLDRV_ODT_RTTNOM, 2, \
+ TgtCS, RttNom
+
+#define TBLDRV_CONFIG_ENTRY_ODT_RTTWR(TgtCS, RttWr) \
+ PSO_TBLDRV_ODT_RTTWR, 2, \
+ TgtCS, RttWr
+
+#define TBLDRV_CONFIG_ENTRY_ODTPATTERN(RdODTCSHigh, RdODTCSLow, WrODTCSHigh, WrODTCSLow) \
+ PSO_TBLDRV_ODTPATTERN, 16, \
+ ((RdODTCSHigh) & 0x0FF), (((RdODTCSHigh) >> 8)& 0x0FF), (((RdODTCSHigh) >> 16)& 0x0FF), (((RdODTCSHigh) >> 24)& 0x0FF), \
+ ((RdODTCSLow) & 0x0FF), (((RdODTCSLow) >> 8)& 0x0FF), (((RdODTCSLow) >> 16)& 0x0FF), (((RdODTCSLow) >> 24)& 0x0FF), \
+ ((WrODTCSHigh) & 0x0FF), (((WrODTCSHigh) >> 8)& 0x0FF), (((WrODTCSHigh) >> 16)& 0x0FF), (((WrODTCSHigh) >> 24)& 0x0FF), \
+ ((WrODTCSLow) & 0x0FF), (((WrODTCSLow) >> 8)& 0x0FF), (((WrODTCSLow) >> 16)& 0x0FF), (((WrODTCSLow) >> 24)& 0x0FF)
+
+#define TBLDRV_CONFIG_ENTRY_ADDRTMG(AddrTmg) \
+ PSO_TBLDRV_ADDRTMG, 4, \
+ ((AddrTmg) & 0x0FF), (((AddrTmg) >> 8)& 0x0FF), (((AddrTmg) >> 16)& 0x0FF), (((AddrTmg) >> 24)& 0x0FF)
+
+#define TBLDRV_CONFIG_ENTRY_ODCCTRL(OdcCtrl) \
+ PSO_TBLDRV_ODCCTRL, 4, \
+ ((OdcCtrl) & 0x0FF), (((OdcCtrl) >> 8)& 0x0FF), (((OdcCtrl) >> 16)& 0x0FF), (((OdcCtrl) >> 24)& 0x0FF)
+
+#define TBLDRV_CONFIG_ENTRY_SLOWACCMODE(SlowAccMode) \
+ PSO_TBLDRV_SLOWACCMODE, 1, \
+ SlowAccMode
+
+#define TBLDRV_CONFIG_ENTRY_RC2_IBT(TgtDimm, IBT) \
+ PSO_TBLDRV_RC2_IBT, 2, \
+ TgtDimm, IBT
+
+#define TBLDRV_OVERRIDE_MR0_CL(RegValOfTcl, MR0CL13, MR0CL0) \
+ PSO_TBLDRV_CONFIG, 1, \
+ CONFIG_DONT_CARE, \
+ PSO_TBLDRV_MR0_CL, 3, \
+ RegValOfTcl, MR0CL13, MR0CL0
+
+#define TBLDRV_OVERRIDE_MR0_WR(RegValOfTwr, MR0WR) \
+ PSO_TBLDRV_CONFIG, 1, \
+ CONFIG_DONT_CARE, \
+ PSO_TBLDRV_MR0_WR, 2, \
+ RegValOfTwr, MR0WR
+
+#define TBLDRV_OVERRIDE_RC10_OPSPEED(Frequency, MR10OPSPEED) \
+ PSO_TBLDRV_CONFIG, 1, \
+ CONFIG_DONT_CARE, \
+ PSO_TBLDRV_RC10_OPSPEED, 5, \
+ ((Frequency) & 0x0FF), (((Frequency) >> 8)& 0x0FF), (((Frequency) >> 16)& 0x0FF), (((Frequency) >> 24)& 0x0FF), \
+ MR10OPSPEED
+
+#define TBLDRV_CONFIG_ENTRY_LRDMM_IBT(F0RC8, F1RC0, F1RC1, F1RC2) \
+ PSO_TBLDRV_LRDIMM_IBT, 4, \
+ F0RC8, F1RC0, F1RC1, F1RC2
+
+#define TBLDRV_CONFIG_ENTRY_2D_TRAINING(Training2dMode) \
+ PSO_TBLDRV_2D_TRAINING, 1, \
+ Training2dMode
+
+//============================
+// Macros for removing entries
+//============================
+#define INVALID_CONFIG_FLAG 0x8000
+
+#define TBLDRV_INVALID_CONFIG \
+ PSO_TBLDRV_INVALID_TYPE, 0
+
+/*----------------------------------------------------------------------------------------
+ * END OF TABLE DRIVEN OVERRIDE MACROS
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _PLATFORM_MEMORY_CONFIGURATION_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/Topology.h b/src/vendorcode/amd/agesa/f16kb/Include/Topology.h
new file mode 100644
index 0000000..2afed20
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/Topology.h
@@ -0,0 +1,164 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Topology interface definitions.
+ *
+ * Contains AMD AGESA internal interface for topology related data which
+ * is consumed by code other than HyperTransport init (and produced by
+ * HyperTransport init.)
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _TOPOLOGY_H_
+#define _TOPOLOGY_H_
+
+// Defines for limiting data structure maximum allocation and limit checking.
+#define MAX_NODES 8
+#define MAX_SOCKETS MAX_NODES
+#define MAX_DIES 2
+
+// Defines useful with package link
+#define HT_LIST_MATCH_INTERNAL_LINK_0 0xFA
+#define HT_LIST_MATCH_INTERNAL_LINK_1 0xFB
+#define HT_LIST_MATCH_INTERNAL_LINK_2 0xFC
+
+/**
+ * Hop Count Table.
+ * This is a heap data structure. The Hops array is filled as a size x size matrix.
+ * The unused space, if any, is all at the end.
+ */
+typedef struct {
+ UINT8 Size; ///< The row and column size of actual hop count data */
+ UINT8 Hops[MAX_NODES * MAX_NODES]; ///< Room for a dynamic two dimensional array of [size][size] */
+} HOP_COUNT_TABLE;
+
+/**
+ * Socket and Module to Node Map Item.
+ * Provide the Node Id and core id range for each module in each processor.
+ */
+typedef struct {
+ UINT8 Node; ///< The module's Node id.
+ UINT8 LowCore; ///< The lowest processor core id for this module.
+ UINT8 HighCore; ///< The highest processor core id for this module.
+ UINT8 EnabledComputeUnits; ///< The value of Enabled for this processor module.
+ UINT8 DualCoreComputeUnits; ///< The value of DualCore for this processor module.
+ UINT8 TripleCoreComputeUnits;///< The value of TripleCore for this processor module.
+ UINT8 QuadCoreComputeUnits; ///< The value of QuadCore for this processor module.
+} SOCKET_DIE_TO_NODE_ITEM;
+
+/**
+ * Socket and Module to Node Map.
+ * This type is a pointer to the actual map, it can be used for a struct item or
+ * for typecasting a heap buffer pointer.
+ */
+typedef SOCKET_DIE_TO_NODE_ITEM (*SOCKET_DIE_TO_NODE_MAP)[MAX_SOCKETS][MAX_DIES];
+
+/**
+ * Node id to Socket Die Map Item.
+ */
+typedef struct {
+ UINT8 Socket; ///< socket of the processor containing the Node.
+ UINT8 Die; ///< the module in the processor which is Node.
+} NODE_TO_SOCKET_DIE_ITEM;
+
+/**
+ * Node id to Socket Die Map.
+ */
+typedef NODE_TO_SOCKET_DIE_ITEM (*NODE_TO_SOCKET_DIE_MAP)[MAX_NODES];
+
+/**
+ * Provide AP core with socket and node context at start up.
+ * This information is posted to the AP cores using a register as a mailbox.
+ */
+typedef struct {
+ UINT32 Node:4; ///< The node id of Core's node.
+ UINT32 Socket:4; ///< The socket of this Core's node.
+ UINT32 Module:2; ///< The internal module number for Core's node.
+ UINT32 ModuleType:2; ///< Single Module = 0, Multi-module = 1.
+ UINT32 :20; ///< Reserved
+} AP_MAIL_INFO_FIELDS;
+
+/**
+ * AP info fields can be written and read to a register.
+ */
+typedef union {
+ UINT32 Info; ///< Just a number for register access, or opaque passing.
+ AP_MAIL_INFO_FIELDS Fields; ///< access to the info fields.
+} AP_MAIL_INFO;
+
+/**
+ * Provide AP core with system degree and system core number at start up.
+ * This information is posted to the AP cores using a register as a mailbox.
+ */
+typedef struct {
+ UINT32 SystemDegree:3; ///< The number of connected links
+ UINT32 :3; ///< Reserved
+ UINT32 HeapIndex:6; ///< The zero-based system core number
+ UINT32 :20; ///< Reserved
+} AP_MAIL_EXT_INFO_FIELDS;
+
+/**
+ * AP info fields can be written and read to a register.
+ */
+typedef union {
+ UINT32 Info; ///< Just a number for register access, or opaque passing.
+ AP_MAIL_EXT_INFO_FIELDS Fields; ///< access to the info fields.
+} AP_MAIL_EXT_INFO;
+
+/**
+ * AP Info mailbox set.
+ */
+typedef struct {
+ AP_MAIL_INFO ApMailInfo; ///< The AP mail info
+ AP_MAIL_EXT_INFO ApMailExtInfo; ///< The extended AP mail info
+} AP_MAILBOXES;
+
+/**
+ * Provide a northbridge to package mapping for link assignments.
+ *
+ */
+typedef struct {
+ UINT8 Link; ///< The Node's link
+ UINT8 Module; ///< The internal module position of Node
+ UINT8 PackageLink; ///< The corresponding package link
+} PACKAGE_HTLINK_MAP_ITEM;
+
+/**
+ * A Processor's complete set of link assignments
+ */
+typedef PACKAGE_HTLINK_MAP_ITEM (*PACKAGE_HTLINK_MAP)[];
+
+#endif // _TOPOLOGY_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Include/gcc-intrin.h b/src/vendorcode/amd/agesa/f16kb/Include/gcc-intrin.h
new file mode 100644
index 0000000..ea80746
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Include/gcc-intrin.h
@@ -0,0 +1,624 @@
+/*
+ * Copyright (c) 2011, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#if defined (__GNUC__)
+
+/* I/O intrin functions. */
+static __inline__ __attribute__((always_inline)) unsigned char __inbyte(unsigned short Port)
+{
+ unsigned char value;
+
+ __asm__ __volatile__ (
+ "in %%dx, %%al"
+ : "=a" (value)
+ : "d" (Port)
+ );
+
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned short __inword(unsigned short Port)
+{
+ unsigned short value;
+
+ __asm__ __volatile__ (
+ "in %%dx, %%ax"
+ : "=a" (value)
+ : "d" (Port)
+ );
+
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __indword(unsigned short Port)
+{
+ unsigned long value;
+
+ __asm__ __volatile__ (
+ "in %%dx, %%eax"
+ : "=a" (value)
+ : "d" (Port)
+ );
+ return value;
+
+}
+
+static __inline__ __attribute__((always_inline)) void __outbyte(unsigned short Port,unsigned char Data)
+{
+ __asm__ __volatile__ (
+ "out %%al, %%dx"
+ :
+ : "a" (Data), "d" (Port)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __outword(unsigned short Port,unsigned short Data)
+{
+ __asm__ __volatile__ (
+ "out %%ax, %%dx"
+ :
+ : "a" (Data), "d" (Port)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __outdword(unsigned short Port,unsigned long Data)
+{
+ __asm__ __volatile__ (
+ "out %%eax, %%dx"
+ :
+ : "a" (Data), "d" (Port)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __inbytestring(unsigned short Port,unsigned char *Buffer,unsigned long Count)
+{
+ __asm__ __volatile__ (
+ "cld ; rep ; insb "
+ : "=D" (Buffer), "=c" (Count)
+ : "d"(Port), "0"(Buffer), "1" (Count)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __inwordstring(unsigned short Port,unsigned short *Buffer,unsigned long Count)
+{
+ __asm__ __volatile__ (
+ "cld ; rep ; insw "
+ : "=D" (Buffer), "=c" (Count)
+ : "d"(Port), "0"(Buffer), "1" (Count)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __indwordstring(unsigned short Port,unsigned long *Buffer,unsigned long Count)
+{
+ __asm__ __volatile__ (
+ "cld ; rep ; insl "
+ : "=D" (Buffer), "=c" (Count)
+ : "d"(Port), "0"(Buffer), "1" (Count)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __outbytestring(unsigned short Port,unsigned char *Buffer,unsigned long Count)
+{
+ __asm__ __volatile__ (
+ "cld ; rep ; outsb "
+ : "=S" (Buffer), "=c" (Count)
+ : "d"(Port), "0"(Buffer), "1" (Count)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __outwordstring(unsigned short Port,unsigned short *Buffer,unsigned long Count)
+{
+ __asm__ __volatile__ (
+ "cld ; rep ; outsw "
+ : "=S" (Buffer), "=c" (Count)
+ : "d"(Port), "0"(Buffer), "1" (Count)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __outdwordstring(unsigned short Port,unsigned long *Buffer,unsigned long Count)
+{
+ __asm__ __volatile__ (
+ "cld ; rep ; outsl "
+ : "=S" (Buffer), "=c" (Count)
+ : "d"(Port), "0"(Buffer), "1" (Count)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readdr0(void)
+{
+ unsigned long value;
+ __asm__ __volatile__ (
+ "mov %%dr0, %[value]"
+ : [value] "=a" (value)
+ );
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readdr1(void)
+{
+ unsigned long value;
+ __asm__ __volatile__ (
+ "mov %%dr1, %[value]"
+ : [value] "=a" (value)
+ );
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readdr2(void)
+{
+ unsigned long value;
+ __asm__ __volatile__ (
+ "mov %%dr2, %[value]"
+ : [value] "=a" (value)
+ );
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readdr3(void)
+{
+ unsigned long value;
+ __asm__ __volatile__ (
+ "mov %%dr3, %[value]"
+ : [value] "=a" (value)
+ );
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readdr7(void)
+{
+ unsigned long value;
+ __asm__ __volatile__ (
+ "mov %%dr7, %[value]"
+ : [value] "=a" (value)
+ );
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readdr(unsigned long reg)
+{
+ switch (reg){
+ case 0:
+ return __readdr0 ();
+ break;
+
+ case 1:
+ return __readdr1 ();
+ break;
+
+ case 2:
+ return __readdr2 ();
+ break;
+
+ case 3:
+ return __readdr3 ();
+ break;
+
+ case 7:
+ return __readdr7 ();
+ break;
+
+ default:
+ return -1;
+ }
+}
+
+static __inline__ __attribute__((always_inline)) void __writedr0(unsigned long Data)
+{
+ __asm__ __volatile__ (
+ "mov %%eax, %%dr0"
+ :
+ : "a" (Data)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __writedr1(unsigned long Data)
+{
+ __asm__ __volatile__ (
+ "mov %%eax, %%dr1"
+ :
+ : "a" (Data)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __writedr2(unsigned long Data)
+{
+ __asm__ __volatile__ (
+ "mov %%eax, %%dr2"
+ :
+ : "a" (Data)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __writedr3(unsigned long Data)
+{
+ __asm__ __volatile__ (
+ "mov %%eax, %%dr3"
+ :
+ : "a" (Data)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __writedr7(unsigned long Data)
+{
+ __asm__ __volatile__ (
+ "mov %%eax, %%dr7"
+ :
+ : "a" (Data)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __writedr(unsigned long reg, unsigned long Data)
+{
+ switch (reg){
+ case 0:
+ __writedr0 (Data);
+ break;
+
+ case 1:
+ __writedr1 (Data);
+ break;
+
+ case 2:
+ __writedr2 (Data);
+ break;
+
+ case 3:
+ __writedr3 (Data);
+ break;
+
+ case 7:
+ __writedr7 (Data);
+ break;
+
+ default:
+ ;
+ }
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readcr0(void)
+{
+ unsigned long value;
+ __asm__ __volatile__ (
+ "mov %%cr0, %[value]"
+ : [value] "=a" (value));
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readcr2(void)
+{
+ unsigned long value;
+ __asm__ __volatile__ (
+ "mov %%cr2, %[value]"
+ : [value] "=a" (value));
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readcr3(void)
+{
+ unsigned long value;
+ __asm__ __volatile__ (
+ "mov %%cr3, %[value]"
+ : [value] "=a" (value));
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readcr4(void)
+{
+ unsigned long value;
+ __asm__ __volatile__ (
+ "mov %%cr4, %[value]"
+ : [value] "=a" (value));
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readcr8(void)
+{
+ unsigned long value;
+ __asm__ __volatile__ (
+ "mov %%cr8, %[value]"
+ : [value] "=a" (value));
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long __readcr(unsigned long reg)
+{
+ switch (reg){
+ case 0:
+ return __readcr0 ();
+ break;
+
+ case 2:
+ return __readcr2 ();
+ break;
+
+ case 3:
+ return __readcr3 ();
+ break;
+
+ case 4:
+ return __readcr4 ();
+ break;
+
+ case 8:
+ return __readcr8 ();
+ break;
+
+ default:
+ return -1;
+ }
+}
+
+static __inline__ __attribute__((always_inline)) void __writecr0(unsigned long Data)
+{
+ __asm__ __volatile__ (
+ "mov %%eax, %%cr0"
+ :
+ : "a" (Data)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __writecr2(unsigned long Data)
+{
+ __asm__ __volatile__ (
+ "mov %%eax, %%cr2"
+ :
+ : "a" (Data)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __writecr3(unsigned long Data)
+{
+ __asm__ __volatile__ (
+ "mov %%eax, %%cr3"
+ :
+ : "a" (Data)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __writecr4(unsigned long Data)
+{
+ __asm__ __volatile__ (
+ "mov %%eax, %%cr4"
+ :
+ : "a" (Data)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __writecr8(unsigned long Data)
+{
+ __asm__ __volatile__ (
+ "mov %%eax, %%cr8"
+ :
+ : "a" (Data)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __writecr(unsigned long reg, unsigned long Data)
+{
+ switch (reg){
+ case 0:
+ __writecr0 (Data);
+ break;
+
+ case 2:
+ __writecr2 (Data);
+ break;
+
+ case 3:
+ __writecr3 (Data);
+ break;
+
+ case 4:
+ __writecr4 (Data);
+ break;
+
+ case 8:
+ __writecr8 (Data);
+ break;
+
+ default:
+ ;
+ }
+}
+
+static __inline__ __attribute__((always_inline)) UINT64 __readmsr(UINT32 msr)
+{
+ UINT64 retval;
+ __asm__ __volatile__(
+ "rdmsr\n\t"
+ : "=A" (retval)
+ : "c" (msr)
+ );
+ return retval;
+}
+
+static __inline__ __attribute__((always_inline)) void __writemsr (UINT32 msr, UINT64 Value)
+{
+ __asm__ __volatile__ (
+ "wrmsr\n\t"
+ :
+ : "c" (msr), "A" (Value)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) UINT64 __rdtsc(void)
+{
+ UINT64 retval;
+ __asm__ __volatile__ (
+ "rdtsc"
+ : "=A" (retval));
+ return retval;
+}
+
+static __inline__ __attribute__((always_inline)) void __cpuid(int CPUInfo[], const int InfoType)
+{
+ __asm__ __volatile__(
+ "cpuid"
+ :"=a" (CPUInfo[0]), "=b" (CPUInfo[1]), "=c" (CPUInfo[2]), "=d" (CPUInfo[3])
+ : "a" (InfoType)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void _disable(void)
+{
+ __asm__ __volatile__ ("cli");
+}
+
+static __inline__ __attribute__((always_inline)) void _enable(void)
+{
+ __asm__ __volatile__ ("sti");
+}
+
+static __inline__ __attribute__((always_inline)) void __halt(void)
+{
+ __asm__ __volatile__ ("hlt");
+}
+
+static __inline__ __attribute__((always_inline)) void __debugbreak(void)
+{
+ __asm__ __volatile__ ("int3");
+}
+
+static __inline__ __attribute__((always_inline)) void __wbinvd(void)
+{
+ __asm__ __volatile__ ("wbinvd");
+}
+
+static __inline__ __attribute__((always_inline)) void __lidt(void *Source)
+{
+ __asm__ __volatile__("lidt %0" : : "m"(*(short*)Source));
+}
+
+static __inline__ __attribute__((always_inline)) void __writefsbyte(const unsigned long Offset, const unsigned char Data)
+{
+ __asm__("movb %b[Data], %%fs:%a[Offset]" : : [Offset] "ir" (Offset), [Data] "iq" (Data));
+}
+
+static __inline__ __attribute__((always_inline)) void __writefsword(const unsigned long Offset, const unsigned short Data)
+{
+ __asm__("movw %w[Data], %%fs:%a[Offset]" : : [Offset] "ir" (Offset), [Data] "iq" (Data));
+}
+
+static __inline__ __attribute__((always_inline)) void __writefsdword(const unsigned long Offset, const unsigned long Data)
+{
+ __asm__("movl %k[Data], %%fs:%a[Offset]" : : [Offset] "ir" (Offset), [Data] "iq" (Data));
+}
+
+static __inline__ __attribute__((always_inline)) unsigned char __readfsbyte(const unsigned long Offset)
+{
+ unsigned char value;
+ __asm__("movb %%fs:%a[Offset], %b[value]" : [value] "=q" (value) : [Offset] "irm" (Offset));
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned short __readfsword(const unsigned long Offset)
+{
+ unsigned short value;
+ __asm__("movw %%fs:%a[Offset], %w[value]" : [value] "=q" (value) : [Offset] "irm" (Offset));
+ return value;
+}
+
+static __inline__ __attribute__((always_inline)) unsigned long long __readfsdword(unsigned long long Offset)
+{
+ unsigned long long value;
+ __asm__("movl %%fs:%a[Offset], %k[value]" : [value] "=q" (value) : [Offset] "irm" (Offset));
+ return value;
+}
+
+#ifdef __SSE3__
+typedef long long __v2di __attribute__ ((__vector_size__ (16)));
+typedef long long __m128i __attribute__ ((__vector_size__ (16), __may_alias__));
+
+static __inline__ __attribute__((always_inline)) void _mm_stream_si128_fs2 (void *__A, __m128i __B)
+{
+ __asm__(".byte 0x64"); // fs prefix
+ __builtin_ia32_movntdq ((__v2di *)__A, (__v2di)__B);
+}
+
+static __inline__ __attribute__((always_inline)) void _mm_stream_si128_fs (void *__A, void *__B)
+{
+ __m128i data;
+ data = (__m128i) __builtin_ia32_lddqu ((char const *)__B);
+ _mm_stream_si128_fs2 (__A, data);
+}
+
+static __inline__ __attribute__((always_inline)) void _mm_clflush_fs (void *__A)
+{
+ __asm__(".byte 0x64"); // fs prefix
+ __builtin_ia32_clflush (__A);
+}
+
+static __inline __attribute__(( __always_inline__)) void _mm_mfence (void)
+{
+ __builtin_ia32_mfence ();
+}
+
+static __inline __attribute__(( __always_inline__)) void _mm_sfence (void)
+{
+ __builtin_ia32_sfence ();
+}
+#endif
+
+static __inline__ __attribute__((always_inline)) void __stosb(unsigned char *dest, unsigned char data, size_t count)
+{
+ __asm__ __volatile__ (
+ "cld ; rep ; stosb "
+ : "=D" (dest), "=c" (count)
+ : "a"(data), "0"(dest), "1" (count)
+ );
+}
+
+static __inline__ __attribute__((always_inline)) void __movsb(unsigned char *dest, unsigned char *data, size_t count)
+{
+ __asm__ __volatile__ (
+ "cld ; rep ; movsb "
+ : "=D" (dest), "=S"(data), "=c" (count)
+ : "S"(data), "0"(dest), "1" (count)
+ );
+}
+
+static __inline__ __attribute__((always_inline))
+void debug_point ( unsigned short Port, unsigned long Data )
+{
+ __outdword (Port, Data);
+ __asm__ __volatile__ (".word 0xfeeb");
+
+}
+
+static __inline__ __attribute__((always_inline))
+void delay_point ( unsigned short Port, unsigned long Data, unsigned long delayTime )
+{
+ UINTN Index;
+ Index = 0;
+ __outdword (Port, Data);
+ while (Index < delayTime * 600000) {
+ __outdword (0xE0, 0);
+ Index ++;
+ }
+}
+#endif // defined (__GNUC__)
diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/PlatformMemoryConfiguration.inc b/src/vendorcode/amd/agesa/f16kb/Legacy/PlatformMemoryConfiguration.inc
new file mode 100644
index 0000000..d75d04f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Legacy/PlatformMemoryConfiguration.inc
@@ -0,0 +1,701 @@
+; ****************************************************************************
+; *
+; * @file
+; *
+; * AMD Platform Specific Memory Configuration
+; *
+; * Contains AMD AGESA Memory Configuration Override Interface
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project: AGESA
+; * @e sub-project: Include
+; * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+;
+; ****************************************************************************
+; *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; *
+; **************************************************************************
+IFNDEF PSO_ENTRY
+ PSO_ENTRY TEXTEQU <UINT8>; < Platform Configuration Table Entry
+ENDIF
+; *****************************************************************************************
+; *
+; * PLATFORM SPECIFIC MEMORY DEFINITIONS
+; *
+; *****************************************************************************************
+; */
+;
+; < Memory Speed and DIMM Population Masks
+;
+; < DDR Speed Masks
+;
+ANY_SPEED EQU 0FFFFFFFFh
+DDR400 EQU ( 1 SHL (DDR400_FREQUENCY / 66))
+DDR533 EQU ( 1 SHL (DDR533_FREQUENCY / 66))
+DDR667 EQU ( 1 SHL (DDR667_FREQUENCY / 66))
+DDR800 EQU ( 1 SHL (DDR800_FREQUENCY / 66))
+DDR1066 EQU ( 1 SHL (DDR1066_FREQUENCY / 66))
+DDR1333 EQU ( 1 SHL (DDR1333_FREQUENCY / 66))
+DDR1600 EQU ( 1 SHL (DDR1600_FREQUENCY / 66))
+DDR1866 EQU ( 1 SHL (DDR1866_FREQUENCY / 66))
+DDR2133 EQU ( 1 SHL (DDR2133_FREQUENCY / 66))
+DDR2400 EQU ( 1 SHL (DDR2400_FREQUENCY / 66))
+; <
+; < DIMM POPULATION MASKS
+;
+ANY_ EQU 0FFh
+SR_DIMM0 EQU 0001h
+SR_DIMM1 EQU 0010h
+SR_DIMM2 EQU 0100h
+SR_DIMM3 EQU 1000h
+DR_DIMM0 EQU 0002h
+DR_DIMM1 EQU 0020h
+DR_DIMM2 EQU 0200h
+DR_DIMM3 EQU 2000h
+QR_DIMM0 EQU 0004h
+QR_DIMM1 EQU 0040h
+QR_DIMM2 EQU 0400h
+QR_DIMM3 EQU 4000h
+LR_DIMM0 EQU 0001h
+LR_DIMM1 EQU 0010h
+LR_DIMM2 EQU 0100h
+LR_DIMM3 EQU 1000h
+ANY_DIMM0 EQU 000Fh
+ANY_DIMM1 EQU 00F0h
+ANY_DIMM2 EQU 0F00h
+ANY_DIMM3 EQU 0F000h
+; <
+; < CS POPULATION MASKS
+;
+CS_ANY_ EQU 0FFh
+CS0_ EQU 01h
+CS1_ EQU 02h
+CS2_ EQU 04h
+CS3_ EQU 08h
+CS4_ EQU 10h
+CS5_ EQU 20h
+CS6_ EQU 40h
+CS7_ EQU 80h
+;
+; Number of Dimms
+;
+ANY_NUM EQU 0FFh
+NO_DIMM EQU 00h
+ONE_DIMM EQU 01h
+TWO_DIMM EQU 02h
+THREE_DIMM EQU 04h
+FOUR_DIMM EQU 08h
+;
+; DIMM VOLTAGE MASK
+;
+VOLT_ANY_ EQU 0FFh
+VOLT1_5_ EQU 01h
+VOLT1_35_ EQU 02h
+VOLT1_25_ EQU 04h
+;
+; NOT APPLICIABLE
+;
+NA_ EQU 00h
+; *****************************************************************************************
+; *
+; * Platform Specific Override Definitions for Socket, Channel and Dimm
+; * This indicates where a platform override will be applied.
+; *
+; *****************************************************************************************
+;
+; SOCKET MASKS
+;
+ANY_SOCKET EQU 0FFh
+SOCKET0 EQU 01h
+SOCKET1 EQU 02h
+SOCKET2 EQU 04h
+SOCKET3 EQU 08h
+SOCKET4 EQU 10h
+SOCKET5 EQU 20h
+SOCKET6 EQU 40h
+SOCKET7 EQU 80h
+;
+; CHANNEL MASKS
+;
+ANY_CHANNEL EQU 0FFh
+CHANNEL_A EQU 01h
+CHANNEL_B EQU 02h
+CHANNEL_C EQU 04h
+CHANNEL_D EQU 08h
+;
+; DIMM MASKS
+;
+ALL_DIMMS EQU 0FFh
+DIMM0 EQU 01h
+DIMM1 EQU 02h
+DIMM2 EQU 04h
+DIMM3 EQU 08h
+;
+; REGISTER ACCESS MASKS
+;
+ACCESS_NB0 EQU 0h
+ACCESS_NB1 EQU 01h
+ACCESS_NB2 EQU 02h
+ACCESS_NB3 EQU 03h
+ACCESS_NB4 EQU 04h
+ACCESS_PHY EQU 05h
+ACCESS_DCT_XT EQU 06h
+;
+; MOTHER BOARD DESIGN LAYERS MASKS
+; Indicates the layer design of mother board
+;
+LAYERS_4 EQU 0h
+LAYERS_6 EQU 01h
+; *****************************************************************************************
+; *
+; * Platform Specific Overriding Table Definitions
+; *
+; *****************************************************************************************
+PSO_END EQU 0 ; < Table End
+PSO_CKE_TRI EQU 1 ; < CKE Tristate Map
+PSO_ODT_TRI EQU 2 ; < ODT Tristate Map
+PSO_CS_TRI EQU 3 ; < CS Tristate Map
+PSO_MAX_DIMMS EQU 4 ; < Max Dimms per channel
+PSO_CLK_SPEED EQU 5 ; < Clock Speed
+PSO_DIMM_TYPE EQU 6 ; < Dimm Type
+PSO_MEMCLK_DIS EQU 7 ; < MEMCLK Disable Map
+PSO_MAX_CHNLS EQU 8 ; < Max Channels per Socket
+PSO_BUS_SPEED EQU 9 ; < Max Memory Bus Speed
+PSO_MAX_CHIPSELS EQU 10 ; < Max Chipsel per Channel
+PSO_MEM_TECH EQU 11 ; < Channel Memory Type
+PSO_WL_SEED EQU 12 ; < DDR3 Write Levelization Seed delay
+PSO_RXEN_SEED EQU 13 ; < Hardwared based RxEn seed
+PSO_NO_LRDIMM_CS67_ROUTING EQU 14 ; < CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs
+PSO_SOLDERED_DOWN_SODIMM_TYPE EQU 15 ; < Soldered down SODIMM type
+PSO_LVDIMM_VOLT1_5_SUPPORT EQU 16 ; < Force LvDimm voltage to 1.5V
+PSO_MIN_RD_WR_DATAEYE_WIDTH EQU 17 ; < Min RD/WR dataeye width
+PSO_CPU_FAMILY_TO_OVERRIDE EQU 18 ; < CPU family signature to tell following PSO macros are CPU family dependent
+PSO_MAX_SOLDERED_DOWN_DIMMS EQU 19 ; < Max Soldered-down Dimms per channel
+PSO_MEMORY_POWER_POLICY EQU 20 ; < Memory power policy override
+PSO_MOTHER_BOARD_LAYERS EQU 21 ; < Mother board layer design
+; **********************************
+; * CONDITIONAL PSO SPECIFIC ENTRIES
+; **********************************
+; Condition Types
+CONDITIONAL_PSO_MIN EQU 100 ; < Start of Conditional Entry Types
+PSO_CONDITION_AND EQU 100 ; < And Block - Start of Conditional block
+PSO_CONDITION_LOC EQU 101 ; < Location - Specify Socket, Channel, Dimms to be affected
+PSO_CONDITION_SPD EQU 102 ; < SPD - Specify a specific SPD value on a Dimm on the channel
+PSO_CONDITION_REG EQU 103 ; Reserved
+PSO_CONDITION_MAX EQU 103 ; < End Of Condition Entry Types
+; Action Types
+PSO_ACTION_MIN EQU 120 ; < Start of Action Entry Types
+PSO_ACTION_ODT EQU 120 ; < ODT values to override
+PSO_ACTION_ADDRTMG EQU 121 ; < Address/Timing values to override
+PSO_ACTION_ODCCONTROL EQU 122 ; < ODC Control values to override
+PSO_ACTION_SLEWRATE EQU 123 ; < Slew Rate value to override
+PSO_ACTION_REG EQU 124 ; Reserved
+PSO_ACTION_SPEEDLIMIT EQU 125 ; < Memory Bus speed Limit based on configuration
+PSO_ACTION_MAX EQU 125 ; < End of Action Entry Types
+CONDITIONAL_PSO_MAX EQU 139 ; < End of Conditional Entry Types
+; **********************************
+; * TABLE DRIVEN PSO SPECIFIC ENTRIES
+; **********************************
+; Condition descriptor
+PSO_TBLDRV_CONFIG EQU 200 ; < Configuration Descriptor
+
+; Overriding entry types
+PSO_TBLDRV_START EQU 210 ; < Start of Table Driven Overriding Entry Types
+PSO_TBLDRV_SPEEDLIMIT EQU 210 ; < Speed Limit
+PSO_TBLDRV_ODT_RTTNOM EQU 211 ; < RttNom
+PSO_TBLDRV_ODT_RTTWR EQU 212 ; < RttWr
+PSO_TBLDRV_ODTPATTERN EQU 213 ; < Odt Patterns
+PSO_TBLDRV_ADDRTMG EQU 214 ; < Address/Timing values
+PSO_TBLDRV_ODCCTRL EQU 215 ; < ODC Control values
+PSO_TBLDRV_SLOWACCMODE EQU 216 ; < Slow Access Mode
+PSO_TBLDRV_MR0_CL EQU 217 ; < MR0[CL]
+PSO_TBLDRV_MR0_WR EQU 218 ; < MR0[WR]
+PSO_TBLDRV_RC2_IBT EQU 219 ; < RC2[IBT]
+PSO_TBLDRV_RC10_OPSPEED EQU 220 ; < RC10[Opearting Speed]
+PSO_TBLDRV_LRDIMM_IBT EQU 221 ; < LrDIMM IBT
+PSO_TBLDRV_2D_TRAINING EQU 222 ; < 2D training
+PSO_TBLDRV_INVALID_TYPE EQU 223 ; < Invalid Type
+PSO_TBLDRV_END EQU 223 ; < End of Table Driven Overriding Entry Types
+
+
+; *****************************************************************************************
+; *
+; * CONDITIONAL OVERRIDE TABLE MACROS
+; *
+; *****************************************************************************************
+CPU_FAMILY_TO_OVERRIDE MACRO CpuFamilyRevision:REQ
+ DB PSO_CPU_FAMILY_TO_OVERRIDE
+ DB 4
+ DD CpuFamilyRevision
+ENDM
+
+MEMCLK_DIS_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ
+ DB PSO_MEMCLK_DIS
+ DB 11
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB Bit0Map
+ DB Bit1Map
+ DB Bit2Map
+ DB Bit3Map
+ DB Bit4Map
+ DB Bit5Map
+ DB Bit6Map
+ DB Bit7Map
+ENDM
+
+CKE_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ
+ DB PSO_CKE_TRI
+ DB 5
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB Bit0Map
+ DB Bit1Map
+ENDM
+
+ODT_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ
+ DB PSO_ODT_TRI
+ DB 7
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB Bit0Map
+ DB Bit1Map
+ DB Bit2Map
+ DB Bit3Map
+ENDM
+
+CS_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ
+ DB PSO_CS_TRI
+ DB 11
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB Bit0Map
+ DB Bit1Map
+ DB Bit2Map
+ DB Bit3Map
+ DB Bit4Map
+ DB Bit5Map
+ DB Bit6Map
+ DB Bit7Map
+ENDM
+
+NUMBER_OF_DIMMS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfDimmSlotsPerChannel:REQ
+ DB PSO_MAX_DIMMS
+ DB 4
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB NumberOfDimmSlotsPerChannel
+ENDM
+
+NUMBER_OF_SOLDERED_DOWN_DIMMS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfSolderedDownDimmsPerChannel:REQ
+ DB PSO_MAX_SOLDERED_DOWN_DIMMS
+ DB 4
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB NumberOfSolderedDownDimmsPerChannel
+ENDM
+
+NUMBER_OF_CHIP_SELECTS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfChipSelectsPerChannel:REQ
+ DB PSO_MAX_CHIPSELS
+ DB 4
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB NumberOfChipSelectsPerChannel
+ENDM
+
+NUMBER_OF_CHANNELS_SUPPORTED MACRO SocketID:REQ, NumberOfChannelsPerSocket:REQ
+ DB PSO_MAX_CHNLS
+ DB 4
+ DB SocketID
+ DB ANY_CHANNEL
+ DB ALL_DIMMS
+ DB NumberOfChannelsPerSocket
+ENDM
+
+OVERRIDE_DDR_BUS_SPEED MACRO SocketID:REQ, ChannelID:REQ, TimingMode:REQ, BusSpeed:REQ
+ PSO_BUS_SPEED
+ DB 11
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DD TimingMode
+ DD BusSpeed
+ENDM
+
+DRAM_TECHNOLOGY MACRO SocketID:REQ, MemTechType:REQ
+ DB PSO_MEM_TECH
+ DB 7
+ DB SocketID
+ DB ANY_CHANNEL
+ DB ALL_DIMMS
+ DD MemTechType
+ENDM
+
+WRITE_LEVELING_SEED MACRO SocketID:REQ, ChannelID:REQ, DimmID:REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \
+Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ
+ DB PSO_WL_SEED
+ DB 12
+ DB SocketID
+ DB ChannelID
+ DB DimmID
+ DB Byte0Seed
+ DB Byte1Seed
+ DB Byte2Seed
+ DB Byte3Seed
+ DB Byte4Seed
+ DB Byte5Seed
+ DB Byte6Seed
+ DB Byte7Seed
+ DB ByteEccSeed
+ENDM
+
+HW_RXEN_SEED MACRO SocketID:REQ, ChannelID:REQ, DimmID: REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \
+Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ
+ DB PSO_RXEN_SEED
+ DB 21
+ DB SocketID
+ DB ChannelID
+ DB DimmID
+ DW Byte0Seed
+ DW Byte1Seed
+ DW Byte2Seed
+ DW Byte3Seed
+ DW Byte4Seed
+ DW Byte5Seed
+ DW Byte6Seed
+ DW Byte7Seed
+ DW ByteEccSeed
+ENDM
+
+NO_LRDIMM_CS67_ROUTING MACRO SocketID:REQ, ChannelID:REQ
+ DB PSO_NO_LRDIMM_CS67_ROUTING
+ DB 4
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB 1
+ENDM
+
+SOLDERED_DOWN_SODIMM_TYPE MACRO SocketID:REQ, ChannelID:REQ
+ DB PSO_SOLDERED_DOWN_SODIMM_TYPE
+ DB 4
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB 1
+ENDM
+
+LVDIMM_FORCE_VOLT1_5_FOR_D0 MACRO
+ DB PSO_LVDIMM_VOLT1_5_SUPPORT
+ DB 4
+ DB ANY_SOCKET
+ DB ANY_CHANNEL
+ DB ALL_DIMMS
+ DB 1
+ENDM
+
+MIN_RD_WR_DATAEYE_WIDTH MACRO SocketID:REQ, ChannelID:REQ, MinRdDataeyeWidth:REQ, MinWrDataeyeWidth:REQ
+ DB PSO_MIN_RD_WR_DATAEYE_WIDTH
+ DB 5
+ DB SocketID
+ DB ChannelID
+ DB ALL_DIMMS
+ DB MinRdDataeyeWidth
+ DB MinWrDataeyeWidth
+ENDM
+
+MEMORY_POWER_POLICY_OVERRIDE MACRO PowerPolicy:REQ
+ DB PSO_MEMORY_POWER_POLICY
+ DB 4
+ DB ANY_SOCKET
+ DB ANY_CHANNEL
+ DB ALL_DIMMS
+ DB PowerPolicy
+ENDM
+
+MOTHER_RBOARD_LAYERS MACRO Layers:REQ
+ DB PSO_MOTHER_BOARD_LAYERS
+ DB 1
+ DB Layers
+ENDM
+; *****************************************************************************************
+; *
+; * CONDITIONAL OVERRIDE TABLE MACROS
+; *
+; *****************************************************************************************
+CONDITION_AND MACRO
+ DB PSO_CONDITION_AND
+ DB 0
+ENDM
+
+COND_LOC MACRO SocketMsk:REQ, ChannelMsk:REQ, DimmMsk:REQ
+ DB PSO_CONDITION_LOC
+ DB 3
+ DB SocketMsk
+ DB ChannelMsk
+ DB DimmMsk
+ENDM
+
+COND_SPD MACRO Byte:REQ, Mask:REQ, Value:REQ
+ DB PSO_CONDITION_SPD
+ DB 3
+ DB Byte
+ DB Mask
+ DB Value
+ENDM
+
+COND_REG MACRO Access:REQ, Offset:REQ, Mask:REQ, Value:REQ
+ DB PSO_CONDITION_REG
+ DB 11
+ DB Access
+ DW Offset
+ DD Mask
+ DD Value
+ENDM
+
+ACTION_ODT MACRO Frequency:REQ, Dimms:REQ, QrDimms:REQ, DramOdt:REQ, QrDramOdt:REQ, DramDynOdt:REQ
+ DB PSO_ACTION_ODT
+ DB 9
+ DD Frequency
+ DB Dimms
+ DB QrDimms
+ DB DramOdt
+ DB QrDramOdt
+ DB DramDynOdt
+ENDM
+
+ACTION_ADDRTMG MACRO Frequency:REQ, DimmConfig:REQ, AddrTmg:REQ
+ DB PSO_ACTION_ADDRTMG
+ DB 10
+ DD Frequency
+ DW DimmConfig
+ DD AddrTmg
+ENDM
+
+ACTION_ODCCTRL MACRO Frequency:REQ, DimmConfig:REQ, OdcCtrl:REQ
+ DB PSO_ACTION_ODCCONTROL
+ DB 10
+ DD Frequency
+ DW DimmConfig
+ DD OdcCtrl
+ENDM
+
+ACTION_SLEWRATE MACRO Frequency:REQ, DimmConfig:REQ, SlewRate:REQ
+ DB PSO_ACTION_SLEWRATE
+ DB 10
+ DD Frequency
+ DW DimmConfig
+ DD SlewRate
+ENDM
+
+ACTION_SPEEDLIMIT MACRO DimmConfig:REQ, Dimms:REQ, SpeedLimit15:REQ, SpeedLimit135:REQ, SpeedLimit125:REQ
+ DB PSO_ACTION_SPEEDLIMIT
+ DB 9
+ DW DimmConfig
+ DB Dimms
+ DW SpeedLimit15
+ DW SpeedLimit135
+ DW SpeedLimit125
+ENDM
+
+; *****************************************************************************************
+; *
+; * END OF CONDITIONAL OVERRIDE TABLE MACROS
+; *
+; *****************************************************************************************
+; *****************************************************************************************
+; *
+; * TABLE DRIVEN OVERRIDE MACROS
+; *
+; *****************************************************************************************
+; Configuration sub-descriptors
+CONFIG_GENERAL EQU 0
+CONFIG_SPEEDLIMIT EQU 1
+CONFIG_RC2IBT EQU 2
+CONFIG_DONT_CARE EQU 3
+Config_Type TEXTEQU <DWORD>
+;
+; Configuration Macros
+;
+TBLDRV_CONFIG_TO_OVERRIDE MACRO DimmPerCH:REQ, Frequency:REQ, DimmVolt:REQ, DimmConfig:REQ
+ DB PSO_TBLDRV_CONFIG
+ DB 9
+ DB CONFIG_GENERAL
+ DB DimmPerCH
+ DB DimmVolt
+ DD Frequency
+ DW DimmConfig
+ENDM
+
+TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE MACRO DimmPerCH:REQ, Dimms:REQ, NumOfSR:REQ, NumOfDR:REQ, NumOfQR:REQ, NumOfLRDimm:REQ
+ DB PSO_TBLDRV_CONFIG
+ DB 7
+ DB CONFIG_SPEEDLIMIT
+ DB DimmPerCH
+ DB Dimms
+ DB NumOfSR
+ DB NumOfDR
+ DB NumOfQR
+ DB NumOfLRDimm
+ENDM
+
+TBLDRV_RC2IBT_CONFIG_TO_OVERRIDE MACRO DimmPerCH:REQ, Frequency:REQ, DimmVolt:REQ, DimmConfig:REQ, NumOfReg:REQ
+ DB PSO_TBLDRV_CONFIG
+ DB 10
+ DB CONFIG_RC2IBT
+ DB DimmPerCH
+ DB DimmVolt
+ DD Frequency
+ DW DimmConfig
+ DB NumOfReg
+ENDM
+;
+; Overriding Macros
+;
+TBLDRV_CONFIG_ENTRY_SPEEDLIMIT MACRO SpeedLimit1_5:REQ, SpeedLimit1_35:REQ, SpeedLimit1_25:REQ
+ DB PSO_TBLDRV_SPEEDLIMIT
+ DB 6
+ DW SpeedLimit1_5
+ DW SpeedLimit1_35
+ DW SpeedLimit1_25
+ENDM
+
+TBLDRV_CONFIG_ENTRY_ODT_RTTNOM MACRO TgtCS:REQ, RttNom:REQ
+ DB PSO_TBLDRV_ODT_RTTNOM
+ DB 2
+ DB TgtCS
+ DB RttNom
+ENDM
+
+TBLDRV_CONFIG_ENTRY_ODT_RTTWR MACRO TgtCS:REQ, RttWr:REQ
+ DB PSO_TBLDRV_ODT_RTTWR
+ DB 2
+ DB TgtCS
+ DB RttWr
+ENDM
+
+TBLDRV_CONFIG_ENTRY_ODTPATTERN MACRO RdODTCSHigh:REQ, RdODTCSLow:REQ, WrODTCSHigh:REQ, WrODTCSLow:REQ
+ DB PSO_TBLDRV_ODTPATTERN
+ DB 16
+ DD RdODTCSHigh
+ DD RdODTCSLow
+ DD WrODTCSHigh
+ DD WrODTCSLow
+ENDM
+
+TBLDRV_CONFIG_ENTRY_ADDRTMG MACRO AddrTmg:REQ
+ DB PSO_TBLDRV_ADDRTMG
+ DB 4
+ DD AddrTmg
+ENDM
+
+TBLDRV_CONFIG_ENTRY_ODCCTRL MACRO OdcCtrl:REQ
+ DB PSO_TBLDRV_ODCCTRL
+ DB 4
+ DD OdcCtrl
+ENDM
+
+TBLDRV_CONFIG_ENTRY_SLOWACCMODE MACRO SlowAccMode:REQ
+ DB PSO_TBLDRV_SLOWACCMODE
+ DB 1
+ DB SlowAccMode
+ENDM
+
+TBLDRV_CONFIG_ENTRY_RC2_IBT MACRO TgtDimm:REQ, IBT:REQ
+ DB PSO_TBLDRV_RC2_IBT
+ DB 2
+ DB TgtDimm
+ DB IBT
+ENDM
+
+TBLDRV_OVERRIDE_MR0_CL MACRO RegValOfTcl:REQ, MR0CL13:REQ, MR0CL0:REQ
+ DB PSO_TBLDRV_CONFIG
+ DB 1
+ DB CONFIG_DONT_CARE
+ DB PSO_TBLDRV_MR0_CL
+ DB 3
+ DB RegValOfTcl
+ DB MR0CL13
+ DB MR0CL0
+ENDM
+
+TBLDRV_OVERRIDE_MR0_WR MACRO RegValOfTwr:REQ, MR0WR:REQ
+ DB PSO_TBLDRV_CONFIG
+ DB 1
+ DB CONFIG_DONT_CARE
+ DB PSO_TBLDRV_MR0_WR
+ DB 2
+ DB RegValOfTcl
+ DB MR0WR
+ENDM
+
+TBLDRV_OVERRIDE_RC10_OPSPEED MACRO Frequency:REQ, MR10OPSPEED:REQ
+ DB PSO_TBLDRV_CONFIG
+ DB 1
+ DB CONFIG_DONT_CARE
+ DB PSO_TBLDRV_RC10_OPSPEED
+ DB 5
+ DD Frequency
+ DB MR10OPSPEED
+ENDM
+
+TBLDRV_CONFIG_ENTRY_LRDMM_IBT MACRO F0RC8:REQ, F1RC0:REQ, F1RC1:REQ, F1RC2:REQ
+ DB PSO_TBLDRV_LRDIMM_IBT
+ DB 4
+ DB F0RC8
+ DB F1RC0
+ DB F1RC1
+ DB F1RC2
+ENDM
+
+TBLDRV_CONFIG_ENTRY_2D_TRAINING MACRO Training2dMode:REQ
+ DB PSO_TBLDRV_2D_TRAINING
+ DB 1
+ DB Training2dMode
+ENDM
+
+;
+; Macros for removing entries
+;
+INVALID_CONFIG_FLAG EQU 8000h
+
+TBLDRV_INVALID_CONFIG MACRO
+ DB PSO_TBLDRV_INVALID_TYPE
+ DB 0
+ENDM
+; *****************************************************************************************
+; *
+; * END OF TABLE DRIVEN OVERRIDE MACROS
+; *
+; *****************************************************************************************
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/Dispatcher.c b/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/Dispatcher.c
new file mode 100644
index 0000000..6cb789e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/Dispatcher.c
@@ -0,0 +1,158 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD binary block interface
+ *
+ * Contains the block entry function dispatcher
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Legacy
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Dispatcher.h"
+#include "Options.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE LEGACY_PROC_DISPATCHER_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST DISPATCH_TABLE DispatchTable[];
+extern AMD_MODULE_HEADER mCpuModuleID;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * The Dispatcher is the entry point into the AGESA software. It takes a function
+ * number as entry parameter in order to invoke the published function
+ *
+ * @param[in,out] ConfigPtr
+ *
+ * @return AGESA Status.
+ *
+ */
+AGESA_STATUS
+CALLCONV
+AmdAgesaDispatcher (
+ IN OUT VOID *ConfigPtr
+ )
+{
+ AGESA_STATUS Status;
+ IMAGE_ENTRY ImageEntry;
+ MODULE_ENTRY ModuleEntry;
+ DISPATCH_TABLE *Entry;
+ UINT32 ImageStart;
+ UINT32 ImageEnd;
+ AMD_IMAGE_HEADER* AltImagePtr;
+
+ Status = AGESA_UNSUPPORTED;
+ ImageEntry = NULL;
+ ModuleEntry = NULL;
+ ImageStart = 0xFFF00000;
+ ImageEnd = 0xFFFFFFFF;
+ AltImagePtr = NULL;
+
+ Entry = (DISPATCH_TABLE *) DispatchTable;
+ while (Entry->FunctionId != 0) {
+ if ((((AMD_CONFIG_PARAMS *) ConfigPtr)->Func) == Entry->FunctionId) {
+ Status = Entry->EntryPoint (ConfigPtr);
+ break;
+ }
+ Entry++;
+ }
+
+ // 2. Try next dispatcher if possible, and we have not already got status back
+ if ((mCpuModuleID.NextBlock != NULL) && (Status == AGESA_UNSUPPORTED)) {
+ ModuleEntry = (MODULE_ENTRY) (UINT32) mCpuModuleID.NextBlock->ModuleDispatcher;
+ if (ModuleEntry != NULL) {
+ Status = (*ModuleEntry) (ConfigPtr);
+ }
+ }
+
+ // 3. If not this image specific function, see if we can find alternative image instead
+ if (Status == AGESA_UNSUPPORTED) {
+ if ((((AMD_CONFIG_PARAMS *)ConfigPtr)->AltImageBasePtr != 0xFFFFFFFF ) || (((AMD_CONFIG_PARAMS *)ConfigPtr)->AltImageBasePtr != 0)) {
+ ImageStart = ((AMD_CONFIG_PARAMS *)ConfigPtr)->AltImageBasePtr;
+ ImageEnd = ImageStart + 4;
+ // Locate/test image base that matches this component
+ AltImagePtr = LibAmdLocateImage ((VOID *) (UINT32)ImageStart, (VOID *) (UINT32)ImageEnd, 4096, (CHAR8 *) AGESA_ID);
+ if (AltImagePtr != NULL) {
+ //Invoke alternative Image
+ ImageEntry = (IMAGE_ENTRY) ((UINT32) AltImagePtr + AltImagePtr->EntryPointAddress);
+ Status = (*ImageEntry) (ConfigPtr);
+ }
+ }
+ }
+
+ return (Status);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * The host environment interface of callout.
+ *
+ * @param[in] Func
+ * @param[in] Data
+ * @param[in,out] ConfigPtr
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+CALLCONV
+AmdAgesaCallout (
+ IN UINT32 Func,
+ IN UINT32 Data,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT32 Result;
+ Result = AGESA_UNSUPPORTED;
+ if (((AMD_CONFIG_PARAMS *) ConfigPtr)->CalloutPtr == NULL) {
+ return Result;
+ }
+
+ Result = (((AMD_CONFIG_PARAMS *) ConfigPtr)->CalloutPtr) (Func, Data, ConfigPtr);
+ return (Result);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/agesaCallouts.c b/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/agesaCallouts.c
new file mode 100644
index 0000000..990c0a7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/agesaCallouts.c
@@ -0,0 +1,486 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU AGESA Callout Functions
+ *
+ * Contains code to set / get useful platform information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Common
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ * AMD Generic Encapsulated Software Architecture
+ *
+ * Description: agesaCallouts.c - AGESA Call out functions
+ *
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Dispatcher.h"
+#include "cpuServices.h"
+#include "Ids.h"
+#include "FchPlatform.h"
+#include "Filecode.h"
+#include "FchPlatform.h"
+
+#define FILECODE LEGACY_PROC_AGESACALLOUTS_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S - (AGESA ONLY)
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Call the host environment interface to do the warm or cold reset.
+ *
+ * @param[in] ResetType Warm or Cold Reset is requested
+ * @param[in,out] StdHeader Config header
+ *
+ */
+VOID
+AgesaDoReset (
+ IN UINTN ResetType,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ WARM_RESET_REQUEST Request;
+
+ // Clear warm request bit and set state bits to the current post stage
+ GetWarmResetFlag (StdHeader, &Request);
+ Request.RequestBit = FALSE;
+ Request.StateBits = Request.PostStage;
+ SetWarmResetFlag (StdHeader, &Request);
+
+ Status = AmdAgesaCallout (AGESA_DO_RESET, (UINT32)ResetType, (VOID *) StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Call the host environment interface to allocate buffer in main system memory.
+ *
+ * @param[in] FcnData
+ * @param[in,out] AllocParams Heap manager parameters
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaAllocateBuffer (
+ IN UINTN FcnData,
+ IN OUT AGESA_BUFFER_PARAMS *AllocParams
+ )
+{
+ AGESA_STATUS Status;
+
+ Status = AmdAgesaCallout (AGESA_ALLOCATE_BUFFER, (UINT32)FcnData, (VOID *) AllocParams);
+
+ return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to deallocate buffer in main system memory.
+ *
+ * @param[in] FcnData
+ * @param[in,out] DeallocParams Heap Manager parameters
+ *
+ * @return The AGESA Status returned from the callout.
+ */
+AGESA_STATUS
+AgesaDeallocateBuffer (
+ IN UINTN FcnData,
+ IN OUT AGESA_BUFFER_PARAMS *DeallocParams
+ )
+{
+ AGESA_STATUS Status;
+
+ Status = AmdAgesaCallout (AGESA_DEALLOCATE_BUFFER, (UINT32)FcnData, (VOID *) DeallocParams);
+
+ return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Call the host environment interface to Locate buffer Pointer in main system memory
+ *
+ * @param[in] FcnData
+ * @param[in,out] LocateParams Heap manager parameters
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaLocateBuffer (
+ IN UINTN FcnData,
+ IN OUT AGESA_BUFFER_PARAMS *LocateParams
+ )
+{
+ AGESA_STATUS Status;
+
+ Status = AmdAgesaCallout (AGESA_LOCATE_BUFFER, (UINT32)FcnData, (VOID *) LocateParams);
+
+ return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to launch APs
+ *
+ * @param[in] ApicIdOfCore
+ * @param[in,out] LaunchApParams
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaRunFcnOnAp (
+ IN UINTN ApicIdOfCore,
+ IN AP_EXE_PARAMS *LaunchApParams
+ )
+{
+ AGESA_STATUS Status;
+
+ Status = AmdAgesaCallout (AGESA_RUNFUNC_ONAP, (UINT32)ApicIdOfCore, (VOID *) LaunchApParams);
+
+ return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to read an SPD's content.
+ *
+ * @param[in] FcnData
+ * @param[in,out] ReadSpd
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaReadSpd (
+ IN UINTN FcnData,
+ IN OUT AGESA_READ_SPD_PARAMS *ReadSpd
+ )
+{
+ AGESA_STATUS Status;
+
+ Status = AmdAgesaCallout (AGESA_READ_SPD, (UINT32)FcnData, ReadSpd);
+
+ return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to read an SPD's content.
+ *
+ * @param[in] FcnData
+ * @param[in,out] ReadSpd
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaReadSpdRecovery (
+ IN UINTN FcnData,
+ IN OUT AGESA_READ_SPD_PARAMS *ReadSpd
+ )
+{
+ AGESA_STATUS Status;
+
+ Status = AmdAgesaCallout (AGESA_READ_SPD_RECOVERY, (UINT32)FcnData, ReadSpd);
+
+ return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to provide a user hook opportunity.
+ *
+ * @param[in] FcnData
+ * @param[in,out] MemData
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaHookBeforeDramInitRecovery (
+ IN UINTN FcnData,
+ IN OUT MEM_DATA_STRUCT *MemData
+ )
+{
+ AGESA_STATUS Status;
+
+ Status = AmdAgesaCallout (AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, (UINT32)FcnData, MemData);
+
+ return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to provide a user hook opportunity.
+ *
+ * @param[in] SocketIdModuleId - (SocketID << 8) | ModuleId
+ * @param[in,out] MemData
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaHookBeforeDramInit (
+ IN UINTN SocketIdModuleId,
+ IN OUT MEM_DATA_STRUCT *MemData
+ )
+{
+ AGESA_STATUS Status;
+
+ Status = AmdAgesaCallout (AGESA_HOOKBEFORE_DRAM_INIT, (UINT32)SocketIdModuleId, MemData);
+
+ return Status;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to provide a user hook opportunity.
+ *
+ * @param[in] SocketIdModuleId - (SocketID << 8) | ModuleId
+ * @param[in,out] MemData
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaHookBeforeDQSTraining (
+ IN UINTN SocketIdModuleId,
+ IN OUT MEM_DATA_STRUCT *MemData
+ )
+{
+ AGESA_STATUS Status;
+
+ Status = AmdAgesaCallout (AGESA_HOOKBEFORE_DQS_TRAINING, (UINT32)SocketIdModuleId, MemData);
+
+ return Status;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to provide a user hook opportunity.
+ *
+ * @param[in] FcnData
+ * @param[in,out] MemData
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaHookBeforeExitSelfRefresh (
+ IN UINTN FcnData,
+ IN OUT MEM_DATA_STRUCT *MemData
+ )
+{
+ AGESA_STATUS Status;
+
+ Status = AmdAgesaCallout (AGESA_HOOKBEFORE_EXIT_SELF_REF, (UINT32)FcnData, MemData);
+
+ return Status;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call the host environment interface to provide a user hook opportunity.
+ *
+ * @param[in] Data
+ * @param[in,out] IdsCalloutData
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+
+
+AGESA_STATUS
+AgesaGetIdsData (
+ IN UINTN Data,
+ IN OUT IDS_CALLOUT_STRUCT *IdsCalloutData
+ )
+{
+ AGESA_STATUS Status;
+
+ Status = AmdAgesaCallout (AGESA_GET_IDS_INIT_DATA, (UINT32)Data, IdsCalloutData);
+
+ return Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PCIE slot reset control
+ *
+ *
+ *
+ * @param[in] FcnData Function data
+ * @param[in] ResetInfo Reset information
+ * @retval Status Agesa status
+ */
+
+AGESA_STATUS
+AgesaPcieSlotResetControl (
+ IN UINTN FcnData,
+ IN PCIe_SLOT_RESET_INFO *ResetInfo
+ )
+{
+ AGESA_STATUS Status;
+ Status = AmdAgesaCallout (AGESA_GNB_PCIE_SLOT_RESET, (UINT32) FcnData, ResetInfo);
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get VBIOS image
+ *
+ *
+ *
+ * @param[in] FcnData Function data
+ * @param[in] VbiosImageInfo VBIOS image info
+ * @retval Status Agesa status
+ */
+
+AGESA_STATUS
+AgesaGetVbiosImage (
+ IN UINTN FcnData,
+ IN OUT GFX_VBIOS_IMAGE_INFO *VbiosImageInfo
+ )
+{
+ AGESA_STATUS Status;
+ Status = AmdAgesaCallout (AGESA_GNB_GFX_GET_VBIOS_IMAGE, (UINT32) FcnData, VbiosImageInfo);
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * OEM callout function for FCH data override
+ *
+ *
+ * @param[in] FchData FCH data pointer
+ * @retval Status This feature is not supported
+ */
+
+AGESA_STATUS
+AgesaFchOemCallout (
+ IN VOID *FchData
+ )
+{
+ AGESA_STATUS Status;
+ Status = AmdAgesaCallout(AGESA_FCH_OEM_CALLOUT, (UINT32)FchData, ((FCH_DATA_BLOCK *)FchData)->StdHeader);
+ return Status;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Optional call to the host environment interface to change the external Vref for 2D Training.
+ *
+ * @param[in] SocketIdModuleId - (SocketID << 8) | ModuleId
+ * @param[in,out] MemData
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaExternal2dTrainVrefChange (
+ IN UINTN SocketIdModuleId,
+ IN OUT MEM_DATA_STRUCT *MemData
+ )
+{
+ AGESA_STATUS Status = AGESA_UNSUPPORTED;
+
+
+ return Status;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Call to the host environment interface to change an external Voltage
+ *
+ * @param[in] SocketIdModuleId - (SocketID << 8) | ModuleId
+ * @param[in,out] *AdjustValue - Pointer to VOLTAGE_ADJUST structure
+ *
+ * @return The AGESA Status returned from the callout.
+ *
+ */
+AGESA_STATUS
+AgesaExternalVoltageAdjust (
+ IN UINTN SocketIdModuleId,
+ IN OUT VOLTAGE_ADJUST *AdjustValue
+ )
+{
+ AGESA_STATUS Status;
+
+ Status = AmdAgesaCallout (AGESA_EXTERNAL_VOLTAGE_ADJUST, (UINT32)SocketIdModuleId, AdjustValue);
+
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/arch2008.asm b/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/arch2008.asm
new file mode 100644
index 0000000..a3932c1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/arch2008.asm
@@ -0,0 +1,2676 @@
+;*****************************************************************************
+; AMD Generic Encapsulated Software Architecture
+;
+; Workfile: arch2008.asm $Revision: 84150 $ $Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+;
+; Description: ARCH2008.ASM - AGESA Architecture 2008 Wrapper Template
+;
+;*****************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*****************************************************************************
+
+ .XLIST
+ INCLUDE agesa.inc
+ INCLUDE acwrapg.inc ; Necessary support file as part of wrapper, including but not limited to segment start/end macros.
+ INCLUDE acwrap.inc ; IBVs may specify host BIOS-specific include files required when building.
+ INCLUDE cpcarmac.inc
+ INCLUDE bridge32.inc
+ .LIST
+ .586p
+ .mmx
+
+
+;----------------------------------------------------------------------------
+; Local definitions
+;----------------------------------------------------------------------------
+
+sOemCallout STRUCT
+ FuncName DD ? ; Call out function name
+ FuncPtr DW ? ; Call out function pointer
+sOemCallout ENDS
+
+sOemEventHandler STRUCT
+ ClassCode DD ? ; AGESA event log sub-class code
+ FuncPtr DW ? ; Event handler function pointer
+sOemEventHandler ENDS
+
+;; A typical legacy BIOS implementation may require the E000 and F000 segments
+;; to be cached.
+EXE_CACHE_REGION_BASE_0 EQU 0E0000h
+EXE_CACHE_REGION_SIZE_0 EQU 20000h
+
+;; In this sample implementation, the B1 and B2 images are placed next to each
+;; other in the BIOS ROM to help with the maximization of cached code.
+EXE_CACHE_REGION_BASE_1 EQU AGESA_B1_ADDRESS
+EXE_CACHE_REGION_SIZE_1 EQU 40000h
+
+;; The third region is not needed in our example.
+EXE_CACHE_REGION_BASE_2 EQU 0
+EXE_CACHE_REGION_SIZE_2 EQU 0
+
+
+;----------------------------------------------------------------------------
+; PERSISTENT SEGMENT
+; This segment is required to be present throughout all BIOS execution.
+;----------------------------------------------------------------------------
+
+AMD_PERSISTENT_START
+
+
+;----------------------------------------------------------------------------
+; Instantiate the global descriptor table
+;----------------------------------------------------------------------------
+
+AMD_BRIDGE_32_GDT AMD_GDT ; Instantiate the global descriptor table
+ ; required by the push-high mechanism.
+
+
+;----------------------------------------------------------------------------
+; Declare the external routines required in the persistent segment
+;----------------------------------------------------------------------------
+
+;+-------------------------------------------------------------------------
+;
+; AmdDfltRet
+;
+; Entry:
+; None
+;
+; Exit:
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; Near stub procedure. Simply perform a retn instruction.
+;
+EXTERN AmdDfltRet:NEAR
+
+
+;+-------------------------------------------------------------------------
+;
+; AmdDfltRetFar
+;
+; Entry:
+; None
+;
+; Exit:
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; Far stub procedure. Simply perform a retf instruction.
+;
+EXTERN AmdDfltRetFar:FAR
+
+
+;----------------------------------------------------------------------------
+; Declare the optional external routines in the persistent segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+; myModuleTypeMismatchHandler (Example)
+;
+; Entry:
+; ESI - Pointer to the EVENT_PARAMS structure of the failure.
+; [ESI].DataParam1 - Socket
+; [ESI].DataParam2 - DCT
+; [ESI].DataParam3 - Channel
+; [ESI].DataParam4 - 0x00000000
+;
+; Exit:
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; This procedure can be used to react to a memory module type
+; mismatch error discovered by the AGESA code. Actions taken
+; may include, but are not limited to:
+; Logging the event to NV for display later
+; Reset, excluding the mismatch on subsequent reboot
+; Do nothing
+;
+; Dependencies:
+; None
+;
+EXTERN myModuleTypeMismatchHandler(AmdDfltRet):NEAR
+
+;+---------------------------------------------------------------------------
+;
+; oemPlatformConfigInit (Optional)
+;
+; Entry:
+; EDI - 32-bit flat pointer to the PLATFORM_CONFIGURATION to be
+; passed in to the next AGESA entry point.
+;
+; typedef struct {
+; IN PERFORMANCE_PROFILE PlatformProfile;
+; IN CPU_HT_DEEMPHASIS_LEVEL *PlatformDeemphasisList;
+; IN UINT8 CoreLevelingMode;
+; IN PLATFORM_C1E_MODES C1eMode;
+; IN UINT32 C1ePlatformData;
+; IN UINT32 C1ePlatformData1;
+; IN UINT32 C1ePlatformData2;
+; IN UINT32 C1ePlatformData3;
+; IN BOOLEAN UserOptionDmi;
+; IN BOOLEAN UserOptionPState;
+; IN BOOLEAN UserOptionSrat;
+; IN BOOLEAN UserOptionSlit;
+; IN BOOLEAN UserOptionWhea;
+; IN UINT32 PowerCeiling;
+; IN BOOLEAN PstateIndependent;
+; } PLATFORM_CONFIGURATION;
+;
+; typedef struct {
+; IN UINT8 Socket;
+; IN UINT8 Link;
+; IN UINT8 LoFreq;
+; IN UINT8 HighFreq;
+; IN PLATFORM_DEEMPHASIS_LEVEL ReceiverDeemphasis;
+; IN PLATFORM_DEEMPHASIS_LEVEL DcvDeemphasis;
+; } CPU_HT_DEEMPHASIS_LEVEL;
+;
+; typedef struct {
+; IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode;
+; IN BOOLEAN UseHtAssist;
+; IN BOOLEAN UseAtmMode;
+; IN BOOLEAN UseNbrCache;
+; IN BOOLEAN Use32ByteRefresh;
+; IN BOOLEAN UseVariableMctIsocPriority;
+; } PERFORMANCE_PROFILE;
+;
+; Exit:
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; Provide a single hook routine to modify the parameters of a
+; PLATFORM_CONFIGURATION structure before any entry point that
+; has such a structure as an input.
+;
+; Dependencies:
+; None
+;
+; Example:
+; If your platform is running in UMA mode, the following code
+; may be added:
+; mov (PLATFORM_CONFIGURATION PTR [edi]).PlatformProfile.PlatformControlFlowMode, UmaDr
+;
+EXTERN oemPlatformConfigInit(AmdDfltRetFar):FAR
+
+;+---------------------------------------------------------------------------
+;
+; oemCallout (Optional)
+;
+; Entry:
+; ECX - Callout function number
+; EDX - Function-specific UINTN
+; ESI - Pointer to function specific data
+;
+; Exit:
+; EAX - Contains the AGESA_STATUS return code.
+;
+; Modified:
+; None
+;
+; Purpose:
+; The default call out router function which resides in the same
+; segment as the push-high bridge code.
+;
+; Dependencies:
+; None
+;
+EXTERN oemCallout(AmdDfltRet):NEAR
+
+
+;----------------------------------------------------------------------------
+; Define the sample wrapper routines for the persistent segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+; AmdBridge32
+;
+; Entry:
+; EDX - A Real Mode FAR pointer using seg16:Offset16 format that
+; points to a local host environment call-out router. If
+; this pointer is not equal to zero, then this pointer is
+; used as the call-out router instead of the standard
+; OemCallout. This may be useful when the call-out router
+; is not located in the same segment as the AmdBridge32 and
+; AmdCallout16 routines.
+; ESI - A Flat Mode pointer (32-bit address) that points to the
+; configuration block (AMD_CONFIG_PARAMS) for the AGESA
+; software function.
+;
+; Exit:
+; EAX - Contains the AGESA_STATUS return code.
+;
+; Modified:
+; None
+;
+; Purpose:
+; Execute an AGESA software function through the Push-High interface.
+;
+; Dependencies:
+; This procedure requires a stack. The host environment must use the
+; provided service function to establish the stack environment prior
+; to making the call to this procedure.
+;
+AmdBridge32 PROC FAR PUBLIC
+ AMD_BRIDGE_32 AMD_GDT ; use the macro for the body
+ ret
+AmdBridge32 ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdEnableStack
+;
+; Entry:
+; BX - Return address
+;
+; Exit:
+; EAX - Contains the AGESA_STATUS return code.
+; SS:ESP - Points to the private stack location for this processor core.
+; ECX - Upon success, contains this processor core's stack size in bytes.
+;
+; Modified:
+; EAX, ECX, EDX, EDI, ESI, ESP, DS, ES
+;
+; Purpose:
+; This procedure is used to establish the stack within the host environment.
+;
+; Dependencies:
+; The host environment must use this procedure and not rely on any other
+; sources to create the stack region.
+;
+AmdEnableStack PROC NEAR PUBLIC
+ AMD_ENABLE_STACK
+ ;; EAX = AGESA_SUCCESS, The stack space has been allocated for this core.
+ ;; EAX = AGESA_WARNING, The stack has already been set up. SS:ESP is set
+ ;; to stack top, and ECX is the stack size in bytes.
+ jmp bx
+AmdEnableStack ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdDisableStack
+;
+; Entry:
+; BX - Return address
+;
+; Exit:
+; EAX - Contains the AGESA_STATUS return code.
+;
+; Modified:
+; EAX, ECX, EDX, ESI, ESP
+;
+; Purpose:
+; This procedure is used to remove the pre-memory stack from within the
+; host environment.
+; The exit state for the BSP is described as follows:
+; Memory region 00000-9FFFF MTRRS are set as WB memory.
+; Processor Cache is enabled (CD bit is cleared).
+; MTRRs used for execution cache are kept.
+; Cache content is flushed (invalidated without write-back).
+; Any family-specific clean-up done.
+; The exit state for the APs is described as follows:
+; Memory region 00000-9FFFF MTRRS are set as WB memory.
+; Memory region A0000-DFFFF MTRRS are set as UC IO.
+; Memory region E0000-FFFFF MTRRS are set as UC memory.
+; MTRRs used for execution cache are cleared.
+; Processor Cache is disabled (CD bit is set).
+; Top-of-Memory (TOM) set to the system top of memory as determined
+; by the memory initialization routines.
+; System lock command is enabled.
+; Any family-specific clean-up done.
+;
+; Dependencies:
+; The host environment must use this procedure and not rely on any other
+; sources to break down the stack region.
+; If executing in 16-bit code, the host environment must establish the
+; "Big Real" mode of 32-bit addressing of data.
+;
+AmdDisableStack PROC NEAR PUBLIC
+ AMD_DISABLE_STACK
+ ;; EAX = AGESA_SUCCESS, The stack space has been disabled for this core.
+ jmp bx
+AmdDisableStack ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdCallout16
+;
+; Entry:
+; [esp+8] - Func
+; [esp+12] - Data
+; [esp+16] - Configuration Block
+; [esp+4] - Return address to AGESA
+;
+; Exit:
+; EAX - Contains the AGESA_STATUS return code.
+;
+; Modified:
+; None
+;
+; Purpose:
+; Execute callback from the push-high interface.
+;
+; Dependencies:
+; None
+;
+AmdCallout16 PROC FAR PUBLIC ; declare the procedure
+ AMD_CALLOUT_16 oemCallout ; use the macro for the body
+ ret
+AmdCallout16 ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdProcessAgesaErrors (Optional)
+;
+; Entry:
+; AL - Heap status of the AGESA entry point that was just invoked.
+; EBX - AGESA image base address.
+; EDX - Segment / Offset of the appropriate callout router function.
+;
+; Exit:
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; This procedure is used to handle any errors that may have occurred
+; during an AGESA entry point.
+;
+; Dependencies:
+; None
+;
+AmdProcessAgesaErrors PROC FAR PUBLIC
+ LOCAL localCpuInterfaceBlock:EVENT_PARAMS
+
+ pushad
+ xor edi, edi
+ mov di, ss
+ shl edi, 4
+ lea esi, localCpuInterfaceBlock
+ add esi, edi
+
+ ; Fill default config block
+ mov (EVENT_PARAMS PTR [esi]).StdHeader.Func, AMD_READ_EVENT_LOG
+ mov (EVENT_PARAMS PTR [esi]).StdHeader.ImageBasePtr, ebx
+ mov (EVENT_PARAMS PTR [esi]).StdHeader.AltImageBasePtr, 0
+ mov (EVENT_PARAMS PTR [esi]).StdHeader.HeapStatus, al
+ mov edi, SEG AmdCallout16
+ shl edi, 4
+ add edi, OFFSET AmdCallout16
+ mov (EVENT_PARAMS PTR [esi]).StdHeader.CalloutPtr, edi
+
+ ; Flush the event log searching for, and handling all monitored events
+ xor eax, eax
+ .while (eax == 0)
+ push edx
+ call AmdBridge32
+ pop edx
+ .if (eax == AGESA_SUCCESS)
+ mov eax, (EVENT_PARAMS PTR [esi]).EventInfo
+ .if (eax != 0)
+ lea di, cs:AgesaEventTable
+
+loopThruTable:
+ cmp di, OFFSET cs:AgesaEventTableEnd
+ jae unhandledEvent
+
+ cmp eax, cs:[di].sOemEventHandler.ClassCode
+ je FoundMatch
+ add di, SIZEOF sOemEventHandler
+ jmp loopThruTable
+
+FoundMatch:
+ mov bx, cs:[di].sOemEventHandler.FuncPtr
+ call bx
+
+unhandledEvent:
+ xor eax, eax
+ .else
+ mov al, 1
+ .endif
+ .endif
+ .endw
+ popad
+ ret
+
+AmdProcessAgesaErrors ENDP
+
+
+;----------------------------------------------------------------------------
+; Define the error handler table
+;----------------------------------------------------------------------------
+
+AgesaEventTable LABEL BYTE
+ ;; Add entries as desired
+ ;;---------
+ ;; EXAMPLE
+ ;;---------
+ sOemEventHandler <MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, OFFSET myModuleTypeMismatchHandler>
+AgesaEventTableEnd LABEL BYTE
+
+
+AMD_PERSISTENT_END
+
+
+
+
+;----------------------------------------------------------------------------
+; RECOVERY SEGMENT
+; This segment resides in the classic 'boot-block,' and is used
+; for recovery.
+;----------------------------------------------------------------------------
+
+AMD_RECOVERY_START
+
+
+;----------------------------------------------------------------------------
+; Declare the external routines required in the recovery segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+; myReadSPDRecovery (Required for proper recovery mode operation)
+;
+; Entry:
+; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure.
+;
+; typedef struct {
+; IN OUT AMD_CONFIG_PARAMS StdHeader;
+; IN UINT8 SocketId;
+; IN UINT8 MemChannelId;
+; IN UINT8 DimmId;
+; IN OUT UINT8 *Buffer;
+; IN OUT MEM_DATA_STRUCT *MemData;
+; } AGESA_READ_SPD_PARAMS;
+;
+; Exit:
+; EAX - Contains the AGESA_STATUS return code.
+; AGESA_SUCCESS Indicates the SPD block for the indicated
+; DIMM was read successfully.
+; AGESA_BOUNDS_CHK The specified DIMM is not present.
+; AGESA_UNSUPPORTED This is a required function, so this
+; value being returned causes a critical
+; error response value from the AGESA
+; software function and no memory initialized.
+; AGESA_ERROR The DIMM SPD read process has generated
+; communication errors.
+;
+; Modified:
+; None
+;
+; Purpose:
+; This call out reads a block of memory SPD data and places it
+; into the provided buffer.
+;
+; Dependencies:
+; None
+;
+EXTERN myReadSPDRecovery:NEAR
+
+
+;----------------------------------------------------------------------------
+; Define the sample wrapper routines for the recovery segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+; AmdInitResetWrapper
+;
+; Entry:
+; DS - 0000 with 4 gigabyte access
+; ES - 0000 with 4 gigabyte access
+;
+; Exit:
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; A minimal initialization of the processor core is performed. This
+; procedure must be called by all processor cores. The code path
+; separates the BSP from the APs and performs a separate and appropriate
+; list of tasks for each class of core.
+; For the BSP, the following actions are performed:
+; Internal heap sub-system initialization
+; Primary non-coherent HyperTransportT link initialization
+; Return to the host environment to test for Recovery Mode.
+; The AP processor cores do not participate in the recovery process.
+; However, they execute this routine after being released to execute
+; by the BSP during the main boot process. Their actions include the
+; following:
+; Internal heap sub-system initialization
+; Proceed to a wait loop waiting for commands from the BSP
+;
+; For the cache regions, up to three regions of execution cache can be
+; allocated following the following rules:
+; 1. Once a region is allocated, it cannot be de-allocated. However, it
+; can be expanded.
+; 2. At most, two of the three regions can be located above 1 MByte. A
+; region failing this rule is ignored.
+; 3. All region addresses must be at or above the 0x000D0000 linear
+; address. A region failing this rule is ignored.
+; 4. The address is aligned on a 32-KByte boundary. Starting addresses
+; is rounded down to the nearest 32-Kbyte boundary.
+; 5. The execution cache size must be a multiple of 32 KByte. Size is
+; rounded up to the next multiple of 32 KByte.
+; 6. A region must not span either the 1-MByte boundary or the 4-GByte
+; boundary. Allocated size is truncated to not span the boundary.
+; 7. The granted cached execution regions, address, and size are calculated
+; based on the available cache resources of the processor core.
+; Allocations are made up to the limit of cache available on the
+; installed processor.
+; Warning: Enabling instruction cache outside of this interface can cause
+; data corruption.
+;
+; Dependencies:
+; This procedure is expected to be executed soon after a system reset
+; for the main boot path or resume path of execution.
+;
+; This procedure requires a stack.
+;
+; Because the heap system is not yet operational at the point of the
+; interface call, the host environment must allocate the storage for
+; the AMD_RESET_PARAMS structure before making the first call to
+; AmdCreateStruct. This is the ByHost method of allocation.
+;
+AmdInitResetWrapper PROC NEAR PUBLIC
+ local localCfgBlock:AMD_INTERFACE_PARAMS
+ local localResetParams:AMD_RESET_PARAMS
+
+ pushad
+
+ ; Prepare for the call to initialize the input parameters for AmdInitReset
+ xor eax, eax
+ mov ax, ss
+ shl eax, 4
+ lea esi, localCfgBlock
+ add esi, eax
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+ mov edx, SEG AmdCallout16
+ shl edx, 4
+ add edx, OFFSET AmdCallout16
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+ ; Use the 'ByHost' allocation method because the heap has not been initialized as of yet.
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESET
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, ByHost
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, sizeof AMD_RESET_PARAMS
+ lea edx, localResetParams
+ add edx, eax
+ push edx
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr, edx
+ mov dx, SEG AmdCalloutRouterRecovery
+ shl edx, 16
+ mov dx, OFFSET AmdCalloutRouterRecovery
+ push edx
+ call AmdBridge32
+ pop edx
+ pop esi
+
+ ; The structure has been initialized. Now modify the default settings as desired.
+
+ ; Allocate the execution cache to maximize the amount of code in ROM that is cached.
+ ; Placing the B1 and B2 images near one another is a good way to ensure the AGESA code
+ ; is cached.
+ mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_0
+ mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_0
+ mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_1
+ mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_1
+ mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_2
+ mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_2
+
+ ; Call in to the AmdInitReset entry point
+ push edx
+ call AmdBridge32
+ pop edx
+
+ ;; EAX = AGESA_STATUS
+ ;; AGESA_SUCCESS Early initialization completed successfully.
+ ;; AGESA_WARNING One or more of the execution cache allocation
+ ;; rules were violated, but an adjustment was made
+ ;; and space was allocated.
+ ;; AGESA_ERROR One or more of the execution cache allocation rules
+ ;; were violated, which resulted in a requested cache
+ ;; region to not be allocated.
+ ;; The storage space allocated for the AMD_RESET_PARAMS
+ ;; structure is insufficient.
+
+ .if (eax != AGESA_SUCCESS)
+ mov al, (AMD_RESET_PARAMS ptr [esi]).StdHeader.HeapStatus
+ mov ebx, AGESA_B1_ADDRESS
+ call AmdProcessAgesaErrors
+ .endif
+
+
+ ;; Here are what the MTRRs should look like based off of the CacheRegions specified above:
+
+ ;; Fixed-Range MTRRs
+ ;; Name Address Value
+ ;; ---------------- -------- ----------------
+ ;; MTRRfix4k_E0000 0000026C 0505050505050505
+ ;; MTRRfix4k_E8000 0000026D 0505050505050505
+ ;; MTRRfix4k_F0000 0000026E 0505050505050505
+ ;; MTRRfix4k_F8000 0000026F 0505050505050505
+ ;; MTRRdefType 000002FF 0000000000000C00
+ ;;
+ ;; Variable-Range MTRRs and IO Range
+ ;; MTRRphysBase(n) MTRRphysMask(n)
+ ;; ----------------- -----------------
+ ;; n=0 0000000000000000 0000000000000000
+ ;; n=1 0000000000000000 0000000000000000
+ ;; n=2 0000000000000000 0000000000000000
+ ;; n=3 0000000000000000 0000000000000000
+ ;; n=4 0000000000000000 0000000000000000
+ ;; n=5 Heap Base (Varies by core) 0000FFFFFFFF0800
+ ;; n=6 AGESA_B1_ADDRESS | 6 0000FFFFFFFC0800
+ ;; n=7 0000000000000000 0000000000000000
+
+
+ ;; Because the allocation method is 'ByHost,' the call to AMD_RELEASE_STRUCT is
+ ;; not necessary. Stack space reclamation is left up to the host BIOS.
+
+ popad
+ ret
+
+
+AmdInitResetWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdInitRecoveryWrapper
+;
+; Entry:
+; DS - 0000 with 4 gigabyte access
+; ES - 0000 with 4 gigabyte access
+;
+; Exit:
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; Perform a minimum initialization of the processor and memory to
+; support a recovery mode flash ROM update.
+; For the BSP, the following actions are performed:
+; Configuration of CPU core for recovery process
+; Minimal initialization of some memory
+; The AP processor cores do not participate in the recovery process.
+; No actions or tasks are performed by the AP cores for this time point.
+;
+; Dependencies:
+; This procedure requires a stack. The host environment must use one of
+; the provided service functions to establish the stack environment prior
+; to making the call to this procedure.
+;
+AmdInitRecoveryWrapper PROC NEAR PUBLIC
+ local localCfgBlock:AMD_INTERFACE_PARAMS
+
+ pushad
+
+ ; Prepare for the call to create and initialize the input parameters for AmdInitRecovery
+ xor eax, eax
+ mov ax, ss
+ shl eax, 4
+ lea esi, localCfgBlock
+ add esi, eax
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+ mov edx, SEG AmdCallout16
+ shl edx, 4
+ add edx, OFFSET AmdCallout16
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RECOVERY
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+ push esi
+ mov dx, SEG AmdCalloutRouterRecovery
+ shl edx, 16
+ mov dx, OFFSET AmdCalloutRouterRecovery
+ push edx
+ call AmdBridge32
+ pop edx
+
+ mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+ ; The structure has been initialized. Now modify the default settings as desired.
+
+
+ ; Call in to the AmdInitRecovery entry point
+ push edx
+ call AmdBridge32
+ pop edx
+
+ ;; EAX = AGESA_STATUS
+ ;; AGESA_SUCCESS The function has completed successfully.
+ ;; AGESA_WARNING One or more of the allocation rules were violated,
+ ;; but an adjustment was made and space was allocated.
+ ;; AGESA_ERROR One or more of the allocation rules were violated,
+ ;; which resulted in a requested cache region to not be
+ ;; allocated.
+ ;; AGESA_FATAL No memory was found in the system.
+
+ .if (eax != AGESA_SUCCESS)
+ mov al, (AMD_RECOVERY_PARAMS ptr [esi]).StdHeader.HeapStatus
+ mov ebx, AGESA_B1_ADDRESS
+ call AmdProcessAgesaErrors
+ .endif
+
+ ; Allow AGESA to free the space used by AmdInitRecovery
+ pop esi
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+ call AmdBridge32
+
+ popad
+ ret
+AmdInitRecoveryWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdCalloutRouterRecovery
+;
+; Entry:
+; ECX - Callout function number
+; EDX - Function-specific UINTN
+; ESI - Pointer to function specific data
+;
+; Exit:
+; EAX - Contains the AGESA_STATUS return code.
+;
+; Modified:
+; None
+;
+; Purpose:
+; The call out router function for AmdInitReset and
+; AmdInitRecovery.
+;
+; Dependencies:
+; None
+;
+AmdCalloutRouterRecovery PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES
+ xor ax, ax
+ mov ds, ax
+ mov es, ax
+ lea di, cs:CalloutRouterTableRecovery
+ mov eax, AGESA_UNSUPPORTED
+
+loopThruTable:
+ cmp di, OFFSET cs:CalloutRouterTableRecoveryEnd
+ jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED
+ cmp ecx, cs:[di].sOemCallout.FuncName
+ je FoundMatch
+ add di, SIZEOF sOemCallout
+ jmp loopThruTable
+
+FoundMatch:
+ mov bx, cs:[di].sOemCallout.FuncPtr
+ call bx
+
+amdCpuCalloutExit:
+ ret
+AmdCalloutRouterRecovery ENDP
+
+
+;----------------------------------------------------------------------------
+; Define the callout dispatch table for the recovery segment
+;----------------------------------------------------------------------------
+
+CalloutRouterTableRecovery LABEL BYTE
+ ;; Standard B1 implementations only need the SPD reader call out function to be implemented.
+ sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDRecovery>
+CalloutRouterTableRecoveryEnd LABEL BYTE
+
+
+AMD_RECOVERY_END
+
+
+
+;----------------------------------------------------------------------------
+; PRE-MEMORY SEGMENT
+; This segment must be uncompressed in the ROM image.
+;----------------------------------------------------------------------------
+
+AMD_PREMEM_START
+
+
+;----------------------------------------------------------------------------
+; Declare the external routines required in the recovery segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+; myReadSPDPremem (Required)
+;
+; Entry:
+; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure
+;
+; typedef struct {
+; IN OUT AMD_CONFIG_PARAMS StdHeader;
+; IN UINT8 SocketId;
+; IN UINT8 MemChannelId;
+; IN UINT8 DimmId;
+; IN OUT UINT8 *Buffer;
+; IN OUT MEM_DATA_STRUCT *MemData;
+; } AGESA_READ_SPD_PARAMS;
+;
+; Exit:
+; EAX - Contains the AGESA_STATUS return code.
+; AGESA_SUCCESS Indicates the SPD block for the indicated
+; DIMM was read successfully.
+; AGESA_BOUNDS_CHK The specified DIMM is not present.
+; AGESA_UNSUPPORTED This is a required function, so this
+; value being returned causes a critical
+; error response value from the AGESA
+; software function and no memory initialized.
+; AGESA_ERROR The DIMM SPD read process has generated
+; communication errors.
+;
+; Modified:
+; None
+;
+; Purpose:
+; This call out reads a block of memory SPD data and places it
+; into the provided buffer.
+;
+; Dependencies:
+; None
+;
+EXTERN myReadSPDPremem:NEAR
+
+;+-------------------------------------------------------------------------
+;
+; AmdDfltRetPremem
+;
+; Entry:
+; None
+;
+; Exit:
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; Near stub procedure in the prememory segment. Simply perform a
+; retn instruction.
+;
+EXTERN AmdDfltRetPremem:NEAR
+
+;+---------------------------------------------------------------------------
+;
+; myDoReset (Required)
+;
+; Entry:
+; EDX - Reset type
+; 1 - Warm reset whenever
+; 2 - Cold reset whenever
+; 3 - Warm reset immediately
+; 4 - Cold reset immediately
+; ESI - Pointer to an AMD_CONFIG_PARAMS structure.
+;
+; Exit:
+; EAX - Contains the AGESA_STATUS return code.
+; AGESA_SUCCESS The function has completed successfully.
+; AGESA_UNSUPPORTED This is a required function, so this
+; value being returned causes a critical
+; error response value from the AGESA
+; software function.
+;
+; Modified:
+; None
+;
+; Purpose:
+; This host environment function must initiate the specified type
+; of system reset.
+;
+; Implementation of this function by the host environment is
+; REQUIRED. Some host environments may record this as a request
+; allowing other elements in the system to perform some additional
+; tasks before the actual reset is issued.
+;
+; Dependencies:
+; The AMD processor contains 3 bits (BiosRstDet[2:0]) in a PCI
+; register (F0x6C Link Initialization Control Register) that
+; indicate the reset status. These bits are reserved for use by
+; the AGESA software and should not be modified by the host
+; environment.
+;
+EXTERN myDoReset:NEAR
+
+
+;+---------------------------------------------------------------------------
+;
+; myGetNonVolatileS3Context (Required for proper S3 operation)
+;
+; Entry:
+; None
+;
+; Exit:
+; EBX - Pointer to the non-volatile S3 context block
+; ECX - Size in bytes of the non-volatile S3 context block
+;
+; Modified:
+; None
+;
+; Purpose:
+; The host environment must return the pointer to the data
+; saved during the mySaveNonVolatileS3Context routine.
+;
+; Dependencies:
+; None
+;
+EXTERN myGetNonVolatileS3Context:NEAR
+
+
+;----------------------------------------------------------------------------
+; Declare the optional external routines in the prememory segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+; myAgesaHookBeforeExitSelfRefresh (Optional)
+;
+; Entry:
+; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 44h
+; ESI - Pointer to a data structure containing the memory information
+;
+; Exit:
+; After returning control to AGESA, AGESA will display: - AGESA_TESTPOINT - 45h
+; EAX - Contains the AGESA_STATUS return code
+; AGESA_SUCCESS The function has completed successfully
+; AGESA_UNSUPPORTED This function is not implemented by the host environment
+; AGESA_WARNING A non-critical issue has occued in the host environment
+;
+; Modified:
+; None
+;
+; Purpose:
+; General purpose hook called before the exiting self refresh
+; This procedure is called once per channel
+;
+; Implementation of this function is optional for the host environment
+; This call-out is an opportunity for the host environment to make dynamic
+; modifications to the memory timing settings specific to the board or host
+; environment before exiting self refresh on S3 resume
+;
+; Dependencies:
+; This procedure is called before the exit self refresh bit is set in the resume
+; sequence. The host environment must initiate the OS restart process. This procedure
+; requires a stack. The host environment must establish the stack environment prior
+; to making the call to this procedure
+;
+EXTERN myAgesaHookBeforeExitSelfRefresh(AmdDfltRetPremem):NEAR
+
+
+;+---------------------------------------------------------------------------
+;
+; myHookBeforeDramInit (Optional)
+;
+; Entry:
+; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 40h
+; ESI - Pointer to a data structure containing the memory information
+;
+; Exit:
+; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 41h
+; EAX - Contains the AGESA_STATUS return code.
+; AGESA_SUCCESS The function has completed successfully.
+; AGESA_UNSUPPORTED This function is not implemented by the host environment
+;
+; Modified:
+; None
+;
+; Purpose:
+; General-purpose hook called before the DRAM_Init bit is set. Called
+; once per MCT
+;
+; Implementation of this function is optional for the host environment
+; This call-out is an opportunity for the host environment to make
+; dynamic modifications to the memory timing settings specific to the
+; board or host environment
+;
+; Dependencies:
+; None
+;
+EXTERN myHookBeforeDramInit(AmdDfltRetPremem):NEAR
+
+
+;+---------------------------------------------------------------------------
+;
+; myHookBeforeDQSTraining (Optional)
+;
+; Entry:
+; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 42h
+; ESI - Pointer to a data structure containing the memory information.
+;
+; Exit:
+; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 43h
+; EAX - Contains the AGESA_STATUS return code.
+; AGESA_SUCCESS The function has completed successfully.
+; AGESA_UNSUPPORTED This function is not implemented by the
+; host environment.
+;
+; Modified:
+; None
+;
+; Purpose:
+; General-purpose hook called just before the memory training processes
+; begin. Called once per MCT.
+;
+; Implementation of this function is optional for the host environment.
+; This call-out is an opportunity for the host environment to make
+; dynamic modifications to the memory timing settings specific to the
+; board or host environment.
+;
+; The host environment may also use this call-out for some board-
+; specific features that should be activated at this time point,
+; such as:
+; Low voltage DIMMs-the host environment should set the recommended
+; voltages found in the memory data structure for each memory
+; channel. This needs to occur before training begins.
+;
+; Dependencies:
+; None
+;
+EXTERN myHookBeforeDQSTraining(AmdDfltRetPremem):NEAR
+
+
+;----------------------------------------------------------------------------
+; Define the sample wrapper routines for the prememory segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+; AmdInitEarlyWrapper
+;
+; Entry:
+; On Entry to "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C4h
+; DS - 0000 with 4 gigabyte access
+; ES - 0000 with 4 gigabyte access
+;
+; Exit:
+; On Exit from "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C5h
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; A full initialization of the processor is performed. Action details
+; differ for the BSP and AP processor cores.
+; For the BSP, the following actions are performed:
+; Full HyperTransportT link initialization, coherent and non-coherent
+; Processor register loading
+; Microcode patch load
+; Errata workaround processing
+; Launch all processor cores
+; Configure the processor power management capabilities
+; Request a warm reset if needed
+; For the AP, the following actions are performed:
+; Processor register loading
+; Microcode patch load
+; Errata workaround processing
+; Configure the processor power management capabilities
+;
+; Dependencies:
+; This procedure is expected to be called before main memory initialization
+; and before the system warm reset. Prior to this, the basic configuration
+; done by the AmdInitReset routine must be completed.
+;
+; This procedure requires a stack. The host environment must use one of the
+; provided service functions to establish the stack environment prior to
+; making the call to this procedure.
+;
+; The processes performed at this time point require communication between
+; processor cores.
+;
+; The host environment must recognize that all processor cores are running
+; in parallel and avoid activities that might interfere with the core-to-core
+; communication, such as modifying the MTRR settings or writing to the APIC
+; registers.
+;
+AmdInitEarlyWrapper PROC NEAR PUBLIC
+ local localCfgBlock:AMD_INTERFACE_PARAMS
+
+ pushad
+
+ ; Prepare for the call to create and initialize the input parameters for AmdInitEarly
+ xor eax, eax
+ mov ax, ss
+ shl eax, 4
+ lea esi, localCfgBlock
+ add esi, eax
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+ mov edx, SEG AmdCallout16
+ shl edx, 4
+ add edx, OFFSET AmdCallout16
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_EARLY
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+ push esi
+ mov dx, SEG AmdCalloutRouterPremem
+ shl edx, 16
+ mov dx, OFFSET AmdCalloutRouterPremem
+ push edx
+ call AmdBridge32
+ pop edx
+
+ mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+ ; The structure has been initialized. Now modify the default settings as desired.
+
+ mov edi, esi
+ add edi, (SIZEOF AMD_CONFIG_PARAMS + (3 * (SIZEOF EXECUTION_CACHE_REGION)))
+ call oemPlatformConfigInit
+
+ ; Call in to the AmdInitEarly entry point
+ push edx
+ call AmdBridge32
+ pop edx
+
+ ;; EAX = AGESA_STATUS
+ ;; AGESA_SUCCESS The function has completed successfully.
+ ;; AGESA_ALERT An HyperTransportT link CRC error was observed.
+ ;; AGESA_WARNING One of more of the allocation rules were violated,
+ ;; but an adjustment was made and space was allocated.
+ ;; Or a HyperTransport device does not have the expected
+ ;; capabilities, or unusable redundant HyperTransport
+ ;; links were found.
+ ;; AGESA_ERROR One or more of the allocation rules were violated, which
+ ;; resulted in a requested cache region to not be allocated.
+ ;; Or, a HyperTransport device failed to initialize.
+ ;; AGESA_CRITICAL An illegal or unsupported mixture of processor types was
+ ;; found, or the processors installed were found to have an
+ ;; insufficient MP capability rating for this platform.
+
+ .if (eax != AGESA_SUCCESS)
+ mov al, (AMD_EARLY_PARAMS ptr [esi]).StdHeader.HeapStatus
+ mov ebx, AGESA_B2_ADDRESS
+ call AmdProcessAgesaErrors
+ .endif
+
+ ; Allow AGESA to free the space used by AmdInitEarly
+ pop esi
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+ call AmdBridge32
+
+
+ popad
+ ret
+AmdInitEarlyWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdInitPostWrapper
+;
+; Entry:
+; On Entry to "AmdInitPost" AGESA will display AGESA_TESTPOINT - C6h
+; DS - 0000 with 4 gigabyte access
+; ES - 0000 with 4 gigabyte access
+;
+; Exit:
+; On Exit from "AmdInitPost" AGESA will display AGESA_TESTPOINT - C7h
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; The main system memory is located, initialized, and brought on-line.
+; The processor(s) are prepared for full operation and control by the
+; host environment. Action details differ for the BSP and AP processor
+; cores.
+; For the BSP, the following actions are performed:
+; Full memory initialization and configuration. BSP is the master for
+; this process and may delegate some tasks to APs.
+; AP collection of data for use later.
+; Transfer the HOBs including the artifact data out of the pre-memory
+; cache storage into a temporary holding buffer in the main memory.
+; Check the BIST status of the BSP
+; Shut down the APs.
+; Prepare for the host environment to begin main boot activity.
+; Disable the pre-memory stack.
+; For the APs, the following actions are performed:
+; Report core identity information.
+; Execute indicated memory initialization processes as directed.
+; Check the BIST status of the AP
+; Disable the pre-memory stack.
+; Prepare to halt, giving control to host environment.
+; The entire range of system memory is enabled for Write-Back cache.
+; The fixed MTRRs and the variable MTRRs[7:6] are not changed in order
+; to leave in place any flash ROM region currently set for Write-Protect
+; execution cache.
+;
+; Dependencies:
+; This procedure is called after the host environment has determined that
+; a normal boot to operating system should be performed after any system
+; warm reset is completed and after the configuration done by AmdInitEarly
+; has completed.
+;
+; This procedure requires a stack. The host environment must use one of the
+; provided service functions to establish the stack environment prior to
+; making the call to this procedure.
+;
+; The processes performed at this time point require communication between
+; processor cores. The host environment must recognize that all processor
+; cores are running in parallel and avoid activities that might interfere
+; with the core-to-core communication, such as modifying the MTRR settings
+; or writing to the APIC registers.
+;
+AmdInitPostWrapper PROC NEAR PUBLIC
+ local localCfgBlock:AMD_INTERFACE_PARAMS
+
+ pushad
+
+ ; Prepare for the call to create and initialize the input parameters for AmdInitPost
+ xor eax, eax
+ mov ax, ss
+ shl eax, 4
+ lea esi, localCfgBlock
+ add esi, eax
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+ mov edx, SEG AmdCallout16
+ shl edx, 4
+ add edx, OFFSET AmdCallout16
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_POST
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+ push esi
+ mov dx, SEG AmdCalloutRouterPremem
+ shl edx, 16
+ mov dx, OFFSET AmdCalloutRouterPremem
+ push edx
+ call AmdBridge32
+ pop edx
+
+ mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+ ; The structure has been initialized. Now modify the default settings as desired.
+
+ mov edi, esi
+ add edi, SIZEOF AMD_CONFIG_PARAMS
+ call oemPlatformConfigInit
+
+ ; Call in to the AmdInitPost entry point
+ push edx
+ call AmdBridge32
+ pop edx
+
+ ;; EAX = AGESA_STATUS
+ ;; AGESA_SUCCESS The function has completed successfully.
+ ;; AGESA_ALERT A BIST error was found on one of the cores.
+ ;; AGESA_WARNING HT Assist feature is running sub-optimally.
+ ;; AGESA_FATAL Memory initialization failed.
+
+ .if (eax != AGESA_SUCCESS)
+ mov al, (AMD_POST_PARAMS ptr [esi]).StdHeader.HeapStatus
+ mov ebx, AGESA_B2_ADDRESS
+ call AmdProcessAgesaErrors
+ .endif
+
+ ; Allow AGESA to free the space used by AmdInitPost
+ pop esi
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+ call AmdBridge32
+
+
+ popad
+ ret
+AmdInitPostWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdInitResumeWrapper
+;
+; Entry:
+; On Entry to "AmdInitResume" AGESA will display AGESA_TESTPOINT - D0h
+; DS - 0000 with 4 gigabyte access
+; ES - 0000 with 4 gigabyte access
+;
+; Exit:
+; On Exit from "AmdInitResume" AGESA will display AGESA_TESTPOINT - D1h
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; This procedure initializes or re-initializes the silicon components
+; for the resume boot path. For the processor, main memory is brought
+; out of self-refresh mode. This procedure will use the context data
+; in the NvStorage area of the input structure to re-start the main
+; memory. The host environment must fill the AMD_S3_PARAMS NvStorage
+; and VolatileStorage pointers and related size elements to describe
+; the location of the context data. Note that for this procedure, the
+; two data areas do not need to be contained in one buffer zone, they
+; can be anywhere in the accessible memory address space. If the host
+; environment uses a non-volatile storage device accessed on the system
+; address bus such as flashROM, then the context data does not need to
+; be moved prior to this call. If the host environment uses a non-
+; volatile storage device not located on the system address bus (e.g.
+; CMOS or SSEPROM) then the host environment must transfer the context
+; data to a buffer in main memory prior to calling this procedure.
+;
+; Dependencies:
+; The host environment must have determined that the system should take
+; the resume path prior to calling this procedure. The configuration
+; done by AmdInitEarly and any necessary warm reset must be complete.
+; After this procedure, execution proceeds to general system restoration.
+;
+; This procedure requires a stack. The host environment must use one of
+; the provided service functions to establish the stack environment prior
+; to making the call to this procedure.
+;
+AmdInitResumeWrapper PROC NEAR PUBLIC
+ local localCfgBlock:AMD_INTERFACE_PARAMS
+
+ pushad
+
+ ; Prepare for the call to create and initialize the input parameters for AmdInitResume
+ xor eax, eax
+ mov ax, ss
+ shl eax, 4
+ lea esi, localCfgBlock
+ add esi, eax
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+ mov edx, SEG AmdCallout16
+ shl edx, 4
+ add edx, OFFSET AmdCallout16
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESUME
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+ push esi
+ mov dx, SEG AmdCalloutRouterPremem
+ shl edx, 16
+ mov dx, OFFSET AmdCalloutRouterPremem
+ push edx
+ call AmdBridge32
+ pop edx
+
+ mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+ ; The structure has been initialized. Now modify the default settings as desired.
+
+ mov edi, esi
+ add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS)
+ call oemPlatformConfigInit
+
+ call myGetNonVolatileS3Context
+ mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorage, ebx
+ mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorageSize, ecx
+
+ ; Call in to the AmdInitResume entry point
+ push edx
+ call AmdBridge32
+ pop edx
+
+ ;; EAX = AGESA_STATUS
+ ;; AGESA_SUCCESS Re-initialization has been completed successfully.
+ .if (eax != AGESA_SUCCESS)
+ mov al, (AMD_RESUME_PARAMS ptr [esi]).StdHeader.HeapStatus
+ mov ebx, AGESA_B2_ADDRESS
+ call AmdProcessAgesaErrors
+ .endif
+
+
+ ; Allow AGESA to free the space used by AmdInitResume
+ pop esi
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+ call AmdBridge32
+
+
+ popad
+ ret
+AmdInitResumeWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdCalloutRouterPremem
+;
+; Entry:
+; ECX - Callout function number
+; EDX - Function-specific UINTN
+; ESI - Pointer to function specific data
+;
+; Exit:
+; EAX - Contains the AGESA_STATUS return code.
+;
+; Modified:
+; None
+;
+; Purpose:
+; The call out router function for AmdInitEarly,
+; AmdInitPost, and AmdInitResume.
+;
+; Dependencies:
+; None
+;
+AmdCalloutRouterPremem PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES
+ xor ax, ax
+ mov ds, ax
+ mov es, ax
+ lea di, cs:CalloutRouterTablePremem
+ mov eax, AGESA_UNSUPPORTED
+
+loopThruTable:
+ cmp di, OFFSET cs:CalloutRouterTablePrememEnd
+ jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED
+ cmp ecx, cs:[di].sOemCallout.FuncName
+ je FoundMatch
+ add di, SIZEOF sOemCallout
+ jmp loopThruTable
+
+FoundMatch:
+ mov bx, cs:[di].sOemCallout.FuncPtr
+ call bx
+
+amdCpuCalloutExit:
+ ret
+AmdCalloutRouterPremem ENDP
+
+
+;----------------------------------------------------------------------------
+; Define the callout dispatch table for the prememory segment
+;----------------------------------------------------------------------------
+
+CalloutRouterTablePremem LABEL BYTE
+ ;; Add entries as desired.
+ sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDPremem>
+ sOemCallout <AGESA_HOOKBEFORE_DRAM_INIT, OFFSET myHookBeforeDramInit>
+ sOemCallout <AGESA_HOOKBEFORE_DQS_TRAINING, OFFSET myHookBeforeDQSTraining>
+ sOemCallout <AGESA_HOOKBEFORE_EXIT_SELF_REF, OFFSET myAgesaHookBeforeExitSelfRefresh>
+ sOemCallout <AGESA_DO_RESET, OFFSET myDoReset>
+ sOemCallout <AGESA_EXTERNAL_2D_TRAIN_VREF_CHANGE, OFFSET my2DTrainVrefChange>
+CalloutRouterTablePrememEnd LABEL BYTE
+
+
+
+AMD_PREMEM_END
+
+
+;----------------------------------------------------------------------------
+; POST SEGMENT
+; This segment may be decompressed and run from system RAM.
+;----------------------------------------------------------------------------
+
+AMD_POST_START
+
+
+;----------------------------------------------------------------------------
+; Declare the external routines required in the POST segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+; myAllocateBuffer (Required)
+;
+; Entry:
+; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E2h
+; ESI - Pointer to an AGESA_BUFFER_PARAMS structure.
+;
+; typedef struct {
+; IN OUT AMD_CONFIG_PARAMS StdHeader;
+; IN UINT32 BufferLength;
+; IN UINT32 BufferHandle;
+; OUT VOID *BufferPointer;
+; } AGESA_BUFFER_PARAMS;
+;
+; Exit:
+; After this hook, AGESA will display - AGESA_TESTPOINT - E3h
+; EAX - Contains the AGESA_STATUS return code.
+; AGESA_SUCCESS The requested size of memory has been
+; successfully allocated.
+; AGESA_UNSUPPORTED This is a required function, so this
+; value being returned causes a critical
+; error response value from the AGESA
+; software function.
+; AGESA_ERROR Less than the requested amount of memory
+; was allocated.
+;
+; Modified:
+; EAX
+;
+; Purpose:
+; This function is used after main memory has been initialized
+; and the host environment has taken control of memory allocation.
+; This function must allocate a buffer of the requested size or
+; larger. This function is required to be implemented by the host
+; environment.
+;
+; Dependencies:
+; The following call-outs must work together in the host system.
+; Parameters of the same name have the same function and must be
+; treated the same in each function:
+; AgesaAllocateBuffer
+; AgesaDeallocateBuffer
+; AgesaLocateBuffer
+; AgesaRunFcnOnAp
+; The host environment may need to reserve a location in the buffer
+; to store any host environment specific value(s). The returned
+; pointer must not include this reserved space. The host environment
+; on the AgesaDeallocateBuffer call needs to account for the reserved
+; space. This reserved space may be an identifier or the "handle"
+; used to identify the specific memory block.
+;
+EXTERN myAllocateBuffer:NEAR
+
+;+---------------------------------------------------------------------------
+;
+; myDeallocateBuffer (Required)
+;
+; Entry:
+; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E4h
+; ESI - Pointer to an AGESA_BUFFER_PARAMS structure.
+;
+; typedef struct {
+; IN OUT AMD_CONFIG_PARAMS StdHeader;
+; IN UINT32 BufferLength;
+; IN UINT32 BufferHandle;
+; OUT VOID *BufferPointer;
+; } AGESA_BUFFER_PARAMS;
+;
+; Exit:
+; After this hook, AGESA will display - AGESA_TESTPOINT - E5h
+; EAX - Contains the AGESA_STATUS return code.
+; AGESA_SUCCESS The function has completed successfully.
+; AGESA_BOUNDS_CHK The BufferHandle is invalid. The AGESA
+; software continues with its function.
+; AGESA_UNSUPPORTED This is a required function, so this
+; value being returned causes a critical
+; error response value from the AGESA
+; software function.
+;
+; Modified:
+; EAX
+;
+; Purpose:
+; This function is used after main memory has been initialized
+; and the host environment has taken control of memory allocation.
+; This function releases a valid working buffer. This function is
+; required for the host environment to implement.
+;
+; Dependencies:
+; The following call-outs must work together in the host system.
+; Parameters of the same name have the same function and must be
+; treated the same in each function:
+; AgesaAllocateBuffer
+; AgesaDeallocateBuffer
+; AgesaLocateBuffer
+; AgesaRunFcnOnAp
+;
+EXTERN myDeallocateBuffer:NEAR
+
+;+---------------------------------------------------------------------------
+;
+; myLocateBuffer (Required)
+;
+; Entry:
+; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E6h
+; ESI - Pointer to an AGESA_BUFFER_PARAMS structure.
+;
+; typedef struct {
+; IN OUT AMD_CONFIG_PARAMS StdHeader;
+; IN UINT32 BufferLength;
+; IN UINT32 BufferHandle;
+; OUT VOID *BufferPointer;
+; } AGESA_BUFFER_PARAMS;
+;
+; Exit:
+; After this hook, AGESA will display - AGESA_TESTPOINT - E7h
+; EAX - Contains the AGESA_STATUS return code.
+; AGESA_SUCCESS The function has completed successfully.
+; AGESA_BOUNDS_CHK The presented handle is invalid or the
+; buffer could not be located.
+;
+; Modified:
+; EAX
+;
+; Purpose:
+; This function is used after main memory has been initialized
+; and the host environment has taken control of memory allocation.
+; This function must locate the buffer related to the indicated
+; handle and return the address of the buffer and its length.
+; This function is required to be implemented in the host
+; environment.
+;
+; Dependencies:
+; The following call-outs must work together in the host system.
+; Parameters of the same name have the same function and must be
+; treated the same in each function:
+; AgesaAllocateBuffer
+; AgesaDeallocateBuffer
+; AgesaLocateBuffer
+; AgesaRunFcnOnAp
+;
+EXTERN myLocateBuffer:NEAR
+
+
+;+---------------------------------------------------------------------------
+;
+; myRunFuncOnAp (Required)
+;
+; Entry:
+; EDX - Local APIC ID of the target core.
+;
+; Exit:
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; The host environment must route execution to the target AP and
+; have that AP call the AmdLateRunApTaskWrapper routine defined
+; above.
+;
+; Dependencies:
+; None
+;
+EXTERN myRunFuncOnAp:NEAR
+
+;+---------------------------------------------------------------------------
+;
+; mySaveNonVolatileS3Context (Required for proper S3 operation)
+;
+; Entry:
+; EBX - Pointer to the non-volatile S3 context block
+; ECX - Size in bytes of the non-volatile S3 context block
+;
+; Exit:
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; The host environment must save the non-volatile data to an area
+; that will not lose context while in the ACPI S3 sleep state, but
+; cannot be placed in system RAM. This data will need to be
+; available during the call to AmdInitResume.
+;
+; Dependencies:
+; None
+;
+EXTERN mySaveNonVolatileS3Context:NEAR
+
+;+---------------------------------------------------------------------------
+;
+; mySaveVolatileS3Context (Required for proper S3 operation)
+;
+; Entry:
+; EBX - Pointer to the volatile S3 context block
+; ECX - Size in bytes of the volatile S3 context block
+;
+; Exit:
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; The host environment must save the volatile data to an area
+; that will not lose context while in the ACPI S3 sleep state.
+; This data will need to be available during the call to
+; AmdS3LateRestore.
+;
+; Dependencies:
+; None
+;
+EXTERN mySaveVolatileS3Context:NEAR
+
+;+---------------------------------------------------------------------------
+;
+; myGetVolatileS3Context (Required for proper S3 operation)
+;
+; Entry:
+; None
+;
+; Exit:
+; EBX - Pointer to the volatile S3 context block
+; ECX - Size in bytes of the volatile S3 context block
+;
+; Modified:
+; None
+;
+; Purpose:
+; The host environment must return the pointer to the data
+; saved during the mySaveVolatileS3Context routine.
+;
+; Dependencies:
+; None
+;
+EXTERN myGetVolatileS3Context:NEAR
+
+
+;----------------------------------------------------------------------------
+; Define the sample wrapper routines for the POST segment
+;----------------------------------------------------------------------------
+
+;+---------------------------------------------------------------------------
+;
+; AmdInitEnvWrapper
+;
+; Entry:
+; On Entry to "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C8h
+; DS - 0000 with 4 gigabyte access
+; ES - 0000 with 4 gigabyte access
+;
+; Exit:
+; On Exit from "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C9h
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; This procedure uses the AgesaAllocateBuffer call-out to acquire
+; permanent buffer space for the UEFI Hand-Off Blocks (HOBs). This
+; is also known as, or includes, artifact data being used by the
+; AGESA software. Upon entry to this procedure, the data is being
+; held in a temporary memory location and it must be moved to a
+; location controlled and protected by the host environment.
+;
+; These actions are performed by the BSP. The APs are not assigned
+; any tasks at this time point.
+;
+; Dependencies:
+; This procedure must be called after full memory is initialized and
+; the host environment has taken control of main memory allocation.
+; This procedure should be called before the PCI enumeration takes
+; place and as soon as possible after the host environment memory
+; allocation sub-system has started.
+;
+; This procedure requires a stack. The host environment must use one
+; of the provided service functions to establish the stack environment
+; prior to making the call to this procedure.
+;
+AmdInitEnvWrapper PROC NEAR PUBLIC
+ local localCfgBlock:AMD_INTERFACE_PARAMS
+
+ pushad
+
+ ; Prepare for the call to create and initialize the input parameters for AmdInitEnv
+ xor eax, eax
+ mov ax, ss
+ shl eax, 4
+ lea esi, localCfgBlock
+ add esi, eax
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+ mov edx, SEG AmdCallout16
+ shl edx, 4
+ add edx, OFFSET AmdCallout16
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_ENV
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+ push esi
+ mov dx, SEG AmdCalloutRouterPost
+ shl edx, 16
+ mov dx, OFFSET AmdCalloutRouterPost
+ push edx
+ call AmdBridge32
+ pop edx
+
+ mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+ ; The structure has been initialized. Now modify the default settings as desired.
+
+ mov edi, esi
+ add edi, SIZEOF AMD_CONFIG_PARAMS
+ call oemPlatformConfigInit
+
+ ; Call in to the AmdInitEnv entry point
+ push edx
+ call AmdBridge32
+ pop edx
+
+ ;; EAX = AGESA_STATUS
+ ;; AGESA_SUCCESS The function has completed successfully.
+ ;; AGESA_ERROR The artifact data could not be found or the host
+ ;; environment failed to allocate sufficient buffer space.
+
+ .if (eax != AGESA_SUCCESS)
+ mov al, (AMD_ENV_PARAMS ptr [esi]).StdHeader.HeapStatus
+ mov ebx, AGESA_B2_ADDRESS
+ call AmdProcessAgesaErrors
+ .endif
+
+ ; Allow AGESA to free the space used by AmdInitEnv
+ pop esi
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+ call AmdBridge32
+
+
+ popad
+ ret
+AmdInitEnvWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdInitMidWrapper
+;
+; Entry:
+; On Entry to "AmdInitMid" AGESA will display AGESA_TESTPOINT - CAh
+; DS - 0000 with 4 gigabyte access
+; ES - 0000 with 4 gigabyte access
+;
+; Exit:
+; On Exit from "AmdInitMid" AGESA will display AGESA_TESTPOINT - CBh
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; This procedure call performs special configuration requirements for
+; the graphics display hardware.
+;
+; These actions are performed by the BSP. The APs are not assigned any
+; tasks at this time point.
+;
+; Dependencies:
+; This procedure must be called after PCI enumeration has allocated
+; resources, but before the video BIOS call is performed.
+;
+; This procedure requires a stack. The host environment must use one
+; of the provided service functions to establish the stack environment
+; prior to making the call to this procedure.
+;
+AmdInitMidWrapper PROC NEAR PUBLIC
+ local localCfgBlock:AMD_INTERFACE_PARAMS
+
+ pushad
+
+ ; Prepare for the call to create and initialize the input parameters for AmdInitMid
+ xor eax, eax
+ mov ax, ss
+ shl eax, 4
+ lea esi, localCfgBlock
+ add esi, eax
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+ mov edx, SEG AmdCallout16
+ shl edx, 4
+ add edx, OFFSET AmdCallout16
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_MID
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+ push esi
+ mov dx, SEG AmdCalloutRouterPost
+ shl edx, 16
+ mov dx, OFFSET AmdCalloutRouterPost
+ push edx
+ call AmdBridge32
+ pop edx
+
+ mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+ ; The structure has been initialized. Now modify the default settings as desired.
+
+ mov edi, esi
+ add edi, SIZEOF AMD_CONFIG_PARAMS
+ call oemPlatformConfigInit
+
+ ; Call in to the AmdInitMid entry point
+ push edx
+ call AmdBridge32
+ pop edx
+
+ ;; EAX = AGESA_STATUS
+ ;; AGESA_SUCCESS The function has completed successfully.
+
+ .if (eax != AGESA_SUCCESS)
+ mov al, (AMD_MID_PARAMS ptr [esi]).StdHeader.HeapStatus
+ mov ebx, AGESA_B2_ADDRESS
+ call AmdProcessAgesaErrors
+ .endif
+
+ ; Allow AGESA to free the space used by AmdInitMid
+ pop esi
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+ call AmdBridge32
+
+
+ popad
+ ret
+
+AmdInitMidWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdInitLateWrapper
+;
+; Entry:
+; On Entry to "AmdInitLate" AGESA will display AGESA_TESTPOINT - CCh
+; DS - 0000 with 4 gigabyte access
+; ES - 0000 with 4 gigabyte access
+;
+; Exit:
+; On Exit from "AmdInitLate" AGESA will display AGESA_TESTPOINT - CDh
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; The main purpose of this function is to generate informational
+; data tables used by the operating system. The individual tables
+; can be selected for generation through the user selection entries
+; on the input parameters.
+;
+; This routine uses the Call-Out AgesaAllocateBuffer to allocate a
+; buffer of the proper size to contain the data.
+;
+; The code path separates the BSP from the APs and perform a separate
+; and appropriate list of tasks for each class of core.
+; For the BSP, the following actions are performed:
+; Allocate buffer space for the tables.
+; Generate the table contents.
+; Make sure that the CPU is in a known good power state before
+; proceeding to boot the OS.
+; For the APs, the following actions are performed:
+; Final register settings preparing for entry to OS.
+; Establish the final PState for entry to OS.
+;
+; Dependencies:
+; This routine is expected to be executed late in the boot sequence
+; after main memory has been initialized, after PCI enumeration has
+; completed, after the host environment ACPI sub-system has started,
+; after the host environment has taken control of the APs, but just
+; before the start of OS boot.
+;
+; The host environment must provide the required call-outs listed in
+; the "Required Call-Out Procedures" section of the AGESA interface
+; specification to provide the buffer space in main memory and execute
+; code on the APs. The host environment must register the created ACPI
+; table in the main ACPI pointer tables. This may require moving the
+; generated tables to another location in memory.
+;
+; This procedure requires a stack. The host environment must establish
+; the stack environment prior to making the call to this procedure.
+; Some functions depend upon the preservation of the heap data across
+; the shift from pre-memory environment to a post-memory environment.
+; If that data was not preserved, then those functions cannot complete
+; and an error is returned.
+;
+AmdInitLateWrapper PROC NEAR PUBLIC
+ local localCfgBlock:AMD_INTERFACE_PARAMS
+
+ pushad
+
+ ; Prepare for the call to create and initialize the input parameters for AmdInitLate
+ xor eax, eax
+ mov ax, ss
+ shl eax, 4
+ lea esi, localCfgBlock
+ add esi, eax
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+ mov edx, SEG AmdCallout16
+ shl edx, 4
+ add edx, OFFSET AmdCallout16
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_LATE
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+ push esi
+ mov dx, SEG AmdCalloutRouterPost
+ shl edx, 16
+ mov dx, OFFSET AmdCalloutRouterPost
+ push edx
+ call AmdBridge32
+ pop edx
+
+ mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+ ; The structure has been initialized. Now modify the default settings as desired.
+
+ mov edi, esi
+ add edi, SIZEOF AMD_CONFIG_PARAMS
+ call oemPlatformConfigInit
+
+ ; Call in to the AmdInitLate entry point
+ push edx
+ call AmdBridge32
+ pop edx
+
+ ;; EAX = AGESA_STATUS
+ ;; AGESA_SUCCESS The function has completed successfully.
+ ;; AGESA_ALERT
+ ;; AGESA_ERROR The system could not allocate the needed amount of
+ ;; buffer space; or could not locate the artifact data block in
+ ;; memory. Likely cause: the host environment may not have preserved
+ ;; the data properly.
+
+ .if (eax != AGESA_SUCCESS)
+ mov al, (AMD_LATE_PARAMS ptr [esi]).StdHeader.HeapStatus
+ mov ebx, AGESA_B2_ADDRESS
+ call AmdProcessAgesaErrors
+ .endif
+
+ push es
+ mov ax, SEG AmdAcpiSratPointer
+ mov es, ax
+
+ mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSrat
+ mov es:AmdAcpiSratPointer, ebx
+ mov eax, DWORD PTR [ebx + 4]
+ mov es:AmdAcpiSratSize, eax
+
+ mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSlit
+ mov es:AmdAcpiSlitPointer, ebx
+ mov eax, DWORD PTR [ebx + 4]
+ mov es:AmdAcpiSlitSize, eax
+
+ mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiPState
+ mov es:AmdAcpiSsdtPointer, ebx
+ mov eax, DWORD PTR [ebx + 4]
+ mov es:AmdAcpiSsdtSize, eax
+
+ xor eax, eax
+
+ mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce
+ mov es:AmdAcpiWheaMcePointer, ebx
+ mov ax, WORD PTR [ebx]
+ mov es:AmdAcpiWheaMceSize, eax
+
+ mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce
+ mov es:AmdAcpiWheaCmcPointer, ebx
+ mov ax, WORD PTR [ebx]
+ mov es:AmdAcpiWheaCmcSize, eax
+
+ mov eax, (AMD_LATE_PARAMS ptr [esi]).DmiTable
+ mov es:AmdDmiInfoPointer, eax
+ pop es
+
+
+ ; Allow AGESA to free the space used by AmdInitLate
+ pop esi
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+ call AmdBridge32
+
+ popad
+ ret
+
+AmdInitLateWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdS3SaveWrapper
+;
+; Entry:
+; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CEh
+; DS - 0000 with 4 gigabyte access
+; ES - 0000 with 4 gigabyte access
+;
+; Exit:
+; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CFh
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; This procedure saves critical registers and/or configuration
+; information for preservation across a system suspend mode. All
+; actions needed to prepare the processor for suspend mode is
+; performed, however this procedure does NOT initiate the suspend
+; process. The host environment is expected to perform that duty.
+;
+; These actions are performed by the BSP. The APs are not assigned
+; any tasks at this time point.
+;
+; The initializer routine will NULL out the save area pointers and
+; sizes. This procedure will determine the size of storage needed
+; for all the processor context, and make a call out to the environment
+; for allocation of one buffer to store all of the data. Upon exit, the
+; pointers and sizes within the AMD_S3_PARAMS structure will be updated
+; with the appropriate addresses within the buffer that was allocated.
+; The host environment is expected to then transfer the data pointed to
+; by NvStorage to a non-volatile storage area, and the data pointed to
+; by VolatileStorage to either a non-volatile storage area or system
+; RAM that retains its content across suspend.
+;
+; Dependencies:
+; The host environment must initiate the suspend process.
+;
+; This procedure requires a stack. The host environment must establish
+; the stack environment prior to making the call to this procedure.
+;
+AmdS3SaveWrapper PROC NEAR PUBLIC
+ local localCfgBlock:AMD_INTERFACE_PARAMS
+
+ pushad
+
+ ; Prepare for the call to create and initialize the input parameters for AmdS3Save
+ xor eax, eax
+ mov ax, ss
+ shl eax, 4
+ lea esi, localCfgBlock
+ add esi, eax
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+ mov edx, SEG AmdCallout16
+ shl edx, 4
+ add edx, OFFSET AmdCallout16
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3_SAVE
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+ push esi
+ mov dx, SEG AmdCalloutRouterPost
+ shl edx, 16
+ mov dx, OFFSET AmdCalloutRouterPost
+ push edx
+ call AmdBridge32
+ pop edx
+
+ mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+ ; The structure has been initialized. Now modify the default settings as desired.
+
+ mov edi, esi
+ add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS)
+ call oemPlatformConfigInit
+
+ ; Call in to the AmdS3Save entry point
+ push edx
+ call AmdBridge32
+ pop edx
+
+ ;; EAX = AGESA_STATUS
+ ;; AGESA_SUCCESS All suspend duties have been completed successfully.
+
+ .if (eax != AGESA_SUCCESS)
+ mov al, (AMD_S3SAVE_PARAMS ptr [esi]).StdHeader.HeapStatus
+ mov ebx, AGESA_B2_ADDRESS
+ call AmdProcessAgesaErrors
+ .endif
+
+ mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorageSize
+ .if (ecx != 0)
+ mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorage
+ call mySaveNonVolatileS3Context
+ .endif
+
+ mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize
+ .if (ecx != 0)
+ mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage
+ call mySaveVolatileS3Context
+ .endif
+
+ ; Allow AGESA to free the space used by AmdS3Save
+ pop esi
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+ call AmdBridge32
+
+ popad
+ ret
+
+AmdS3SaveWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdS3LateRestoreWrapper
+;
+; Entry:
+; On Entry to "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D2h
+; DS - 0000 with 4 gigabyte access
+; ES - 0000 with 4 gigabyte access
+;
+; Exit:
+; On Exit from "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D3h
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; This procedure restores the processor state, reloads critical
+; silicon component registers, and performs any re-initialization
+; required by the silicon. This procedure will use the context data
+; in the VolatileStorage area of the input structure to restore the
+; processor registers.
+;
+; The host environment must fill the AMD_S3_PARAMS NvStorage and
+; VolatileStorage pointers and related size elements to describe
+; the location of the context data. Note that for this procedure,
+; the two data areas do not need to be contained in one buffer zone,
+; they can be anywhere in the accessible memory address space. If
+; the host environment uses a non-volatile storage device accessed
+; on the system address bus such as flashROM, then the context data
+; does not need to be moved prior to this call. If the host
+; environment uses a non-volatile storage device not located on the
+; system address bus (e.g. CMOS or SSEPROM) then the host environment
+; must transfer the context data to a buffer in main memory prior to
+; calling this procedure.
+;
+; These actions are performed by the BSP. The APs are not assigned
+; any tasks at this time point.
+;
+; Dependencies:
+; This procedure is called late in the resume sequence, after the
+; PCI control space is restored and just before resuming operating
+; system execution.
+;
+; The host environment must initiate the OS restart process.
+;
+; This procedure requires a stack. The host environment must establish
+; the stack environment prior to making the call to this procedure.
+;
+AmdS3LateRestoreWrapper PROC NEAR PUBLIC
+ local localCfgBlock:AMD_INTERFACE_PARAMS
+
+ pushad
+
+ ; Prepare for the call to create and initialize the input parameters for AmdS3LateRestore
+ xor eax, eax
+ mov ax, ss
+ shl eax, 4
+ lea esi, localCfgBlock
+ add esi, eax
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+ mov edx, SEG AmdCallout16
+ shl edx, 4
+ add edx, OFFSET AmdCallout16
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3LATE_RESTORE
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+ push esi
+ mov dx, SEG AmdCalloutRouterPost
+ shl edx, 16
+ mov dx, OFFSET AmdCalloutRouterPost
+ push edx
+ call AmdBridge32
+ pop edx
+
+ mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+ ; The structure has been initialized. Now modify the default settings as desired.
+
+ mov edi, esi
+ add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS)
+ call oemPlatformConfigInit
+
+ call myGetVolatileS3Context
+ mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage, ebx
+ mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize, ecx
+
+ ; Call in to the AmdS3LateRestore entry point
+ push edx
+ call AmdBridge32
+ pop edx
+
+ ;; EAX = AGESA_STATUS
+ ;; AGESA_SUCCESS All resume processes have been completed successfully.
+
+ .if (eax != AGESA_SUCCESS)
+ mov al, (AMD_S3LATE_PARAMS ptr [esi]).StdHeader.HeapStatus
+ mov ebx, AGESA_B2_ADDRESS
+ call AmdProcessAgesaErrors
+ .endif
+
+ ; Allow AGESA to free the space used by AmdS3LateRestore
+ pop esi
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+ call AmdBridge32
+
+ popad
+ ret
+AmdS3LateRestoreWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdLateRunApTaskWrapper
+;
+; Entry:
+; Prior to this hook, AGESA will display - AGESA_TESTPOINT - D4h
+; DS - 0000 with 4 gigabyte access
+; ES - 0000 with 4 gigabyte access
+;
+; Exit:
+; After this hook, AGESA will display - AGESA_TESTPOINT - D5h
+; None
+;
+; Modified:
+; None
+;
+; Purpose:
+; This entry point is tightly connected with the "AgesaRunFcnOnAp"
+; call out. The AGESA software will call the call-out "AgesaRunFcnOnAp";
+; the host environment will then call this entry point to have the AP
+; execute the requested function. This is needed late in the Post and
+; Resume branches for running an AP task since the AGESA software has
+; relinquished control of the APs to the host environment.
+;
+; Dependencies:
+; The host environment must implement the"AgesaRunFcnOnAp" call-out
+; and route execution to the target AP.
+;
+AmdLateRunApTaskWrapper PROC NEAR PUBLIC
+ local localCfgBlock:AMD_INTERFACE_PARAMS
+
+ pushad
+
+ ; Prepare for the call to create and initialize the input parameters for AmdLateRunApTask
+ xor eax, eax
+ mov ax, ss
+ shl eax, 4
+ lea esi, localCfgBlock
+ add esi, eax
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0
+ mov edx, SEG AmdCallout16
+ shl edx, 4
+ add edx, OFFSET AmdCallout16
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx
+
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_LATE_RUN_AP_TASK
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0
+ push esi
+ mov dx, SEG AmdCalloutRouterPost
+ shl edx, 16
+ mov dx, OFFSET AmdCalloutRouterPost
+ push edx
+ call AmdBridge32
+ pop edx
+
+ mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr
+
+ ; The structure has been initialized. Now modify the default settings as desired.
+
+ push es
+ mov ax, SEG AmdRunCodeOnApDataPointer
+ mov es, ax
+ mov eax, es:AmdRunCodeOnApDataPointer
+ mov (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock, eax
+ mov eax, es:AmdRunCodeOnApDataSize
+ mov (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength, eax
+ mov eax, es:AmdRunCodeOnApFunction
+ mov (AP_EXE_PARAMS PTR [esi]).FunctionNumber, eax
+ pop es
+
+ ; Call in to the AmdLateRunApTask dispatcher
+ push edx
+ call AmdBridge32
+ pop edx
+
+ ;; EAX = AGESA_STATUS
+ push es
+ mov bx, SEG AmdRunCodeOnApStatus
+ mov es, bx
+ mov es:AmdRunCodeOnApStatus, eax
+ pop es
+
+ ; Allow AGESA to free the space used by AmdLateRunApTask
+ pop esi
+ mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT
+ call AmdBridge32
+
+ popad
+ ret
+
+AmdLateRunApTaskWrapper ENDP
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdRunFuncOnAp (Required)
+;
+; Entry:
+; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E8h
+; EDX - Local APIC ID of the target core.
+; ESI - Pointer to an AP_EXE_PARAMS structure.
+;
+; typedef struct {
+; IN OUT AMD_CONFIG_PARAMS StdHeader;
+; IN UINT32 FunctionNumber;
+; IN VOID *RelatedDataBlock;
+; IN UINT32 RelatedDataBlockLength;
+; } AP_EXE_PARAMS;
+;
+; Exit:
+; After this hook, AGESA will display - AGESA_TESTPOINT - E9h
+; EAX - Contains the AGESA_STATUS return code.
+; AGESA_SUCCESS The function has completed successfully.
+; AGESA_UNSUPPORTED This is a required function, so this value
+; being returned causes a critical error
+; response value from the AGESAT software
+; function and no memory initialized.
+; AGESA_WARNING The AP did not respond.
+;
+; Modified:
+; EAX
+;
+; Purpose:
+; This function is used after main memory has been initialized
+; and the host environment has taken control of AP task dispatching.
+; This function must cause the indicated function code to be executed
+; upon the specified Application Processor. This procedure must be
+; executed in 32-bit mode. This function is required to be implemented
+; in the host environment.
+;
+; Dependencies:
+; The host environment must route execution to the target AP and
+; have that AP call the"AmdLateRunApTask" entry point.
+;
+AmdRunFuncOnAp PROC NEAR PUBLIC
+
+ push es
+ mov ax, SEG AmdRunCodeOnApDataPointer
+ mov es, ax
+ mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock
+ mov es:AmdRunCodeOnApDataPointer, eax
+ mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength
+ mov es:AmdRunCodeOnApDataSize, eax
+ mov eax, (AP_EXE_PARAMS PTR [esi]).FunctionNumber
+ mov es:AmdRunCodeOnApFunction, eax
+ mov eax, AGESA_UNSUPPORTED
+ mov es:AmdRunCodeOnApStatus, eax
+ pop es
+
+ call myRunFuncOnAp
+
+ push es
+ mov ax, SEG AmdRunCodeOnApStatus
+ mov es, ax
+ mov eax, es:AmdRunCodeOnApStatus
+ pop es
+ ret
+AmdRunFuncOnAp ENDP
+
+
+
+;+---------------------------------------------------------------------------
+;
+; AmdCalloutRouterPost
+;
+; Entry:
+; ECX - Callout function number
+; EDX - Function-specific UINTN
+; ESI - Pointer to function specific data
+;
+; Exit:
+; EAX - Contains the AGESA_STATUS return code.
+;
+; Modified:
+; None
+;
+; Purpose:
+; The call out router function for AmdInitEnv,
+; AmdInitMid, AmdInitLate, AmdS3Save, and
+; AmdS3LateRestore.
+;
+; Dependencies:
+; None
+;
+AmdCalloutRouterPost PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES
+ xor ax, ax
+ mov ds, ax
+ mov es, ax
+ lea di, cs:CalloutRouterTablePost
+ mov eax, AGESA_UNSUPPORTED
+
+loopThruTable:
+ cmp di, OFFSET cs:CalloutRouterTablePostEnd
+ jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED
+ cmp ecx, cs:[di].sOemCallout.FuncName
+ je FoundMatch
+ add di, SIZEOF sOemCallout
+ jmp loopThruTable
+
+FoundMatch:
+ mov bx, cs:[di].sOemCallout.FuncPtr
+ call bx
+
+amdCpuCalloutExit:
+ ret
+AmdCalloutRouterPost ENDP
+
+
+;----------------------------------------------------------------------------
+; Define the callout dispatch table for the POST segment
+;----------------------------------------------------------------------------
+
+CalloutRouterTablePost LABEL BYTE
+ ;; Add entries as desired.
+ sOemCallout <AGESA_ALLOCATE_BUFFER, OFFSET myAllocateBuffer>
+ sOemCallout <AGESA_DEALLOCATE_BUFFER, OFFSET myDeallocateBuffer>
+ sOemCallout <AGESA_LOCATE_BUFFER, OFFSET myLocateBuffer>
+ sOemCallout <AGESA_RUNFUNC_ONAP, OFFSET AmdRunFuncOnAp>
+CalloutRouterTablePostEnd LABEL BYTE
+
+AMD_POST_END
+
+
+;----------------------------------------------------------------------------
+; CPU DATA SEGMENT
+; This segment must be writable, and present at the time that
+; AmdInitLate is run.
+;----------------------------------------------------------------------------
+
+CPU_DATASEG_START
+
+ ;; Data used to store pointers for later use by the host environment.
+ PUBLIC AmdAcpiSratPointer
+ PUBLIC AmdAcpiSratSize
+ PUBLIC AmdAcpiSlitPointer
+ PUBLIC AmdAcpiSlitSize
+ PUBLIC AmdAcpiSsdtPointer
+ PUBLIC AmdAcpiSsdtSize
+ PUBLIC AmdAcpiWheaMcePointer
+ PUBLIC AmdAcpiWheaMceSize
+ PUBLIC AmdAcpiWheaCmcPointer
+ PUBLIC AmdAcpiWheaCmcSize
+ PUBLIC AmdDmiInfoPointer
+ AmdAcpiSratPointer DWORD ?
+ AmdAcpiSratSize DWORD ?
+ AmdAcpiSlitPointer DWORD ?
+ AmdAcpiSlitSize DWORD ?
+ AmdAcpiSsdtPointer DWORD ?
+ AmdAcpiSsdtSize DWORD ?
+ AmdAcpiWheaMcePointer DWORD ?
+ AmdAcpiWheaMceSize DWORD ?
+ AmdAcpiWheaCmcPointer DWORD ?
+ AmdAcpiWheaCmcSize DWORD ?
+ AmdDmiInfoPointer DWORD ?
+
+ ;; Data used for communication between the AP and the BSP.
+ PUBLIC AmdRunCodeOnApDataPointer
+ PUBLIC AmdRunCodeOnApDataSize
+ PUBLIC AmdRunCodeOnApFunction
+ PUBLIC AmdRunCodeOnApStatus
+ AmdRunCodeOnApDataPointer DWORD ?
+ AmdRunCodeOnApDataSize DWORD ?
+ AmdRunCodeOnApFunction DWORD ?
+ AmdRunCodeOnApStatus DWORD ?
+
+CPU_DATASEG_END
+
+
+END
diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/hobTransfer.c b/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/hobTransfer.c
new file mode 100644
index 0000000..7f03e13
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Legacy/Proc/hobTransfer.c
@@ -0,0 +1,421 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Hob Transfer functions.
+ *
+ * Contains code that copy Heap to temp memory or main memory.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Legacy/Proc
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuCacheInit.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "cpuLateInit.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE LEGACY_PROC_HOBTRANSFER_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT64
+HeapGetBaseAddressInTempMem (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * P U B L I C F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * CopyHeapToTempRamAtPost
+ *
+ * This function copies BSP heap content to RAM
+ *
+ * @param[in,out] StdHeader - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ * @retval AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+CopyHeapToTempRamAtPost (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *BaseAddressInCache;
+ UINT8 *BaseAddressInTempMem;
+ UINT8 *Source;
+ UINT8 *Destination;
+ UINT8 AlignTo16ByteInCache;
+ UINT8 AlignTo16ByteInTempMem;
+ UINT8 Ignored;
+ UINT32 SizeOfNodeData;
+ UINT32 TotalSize;
+ UINT32 HeapRamFixMtrr;
+ UINT32 HeapRamVariableMtrr;
+ UINT32 HeapInCacheOffset;
+ UINT64 MsrData;
+ UINT64 VariableMtrrBase;
+ UINT64 VariableMtrrMask;
+ UINTN AmdHeapRamAddress;
+ AGESA_STATUS IgnoredStatus;
+ BUFFER_NODE *HeapInCache;
+ BUFFER_NODE *HeapInTempMem;
+ HEAP_MANAGER *HeapManagerInCache;
+ HEAP_MANAGER *HeapManagerInTempMem;
+ CACHE_INFO *CacheInfoPtr;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ AmdHeapRamAddress = (UINTN) UserOptions.CfgHeapDramAddress;
+ //
+ //If the user define address above 1M, Mem Init has already set
+ //whole available memory as WB cacheable.
+ //
+ if (AmdHeapRamAddress < 0x100000) {
+ // Region below 1MB
+ // Fixed MTTR region
+ // turn on modification bit
+ LibAmdMsrRead (MSR_SYS_CFG, &MsrData, StdHeader);
+ MsrData |= 0x80000;
+ LibAmdMsrWrite (MSR_SYS_CFG, &MsrData, StdHeader);
+
+ if (AmdHeapRamAddress >= 0xC0000) {
+ //
+ // 0xC0000 ~ 0xFFFFF
+ //
+ HeapRamFixMtrr = (UINT32) (AMD_MTRR_FIX4k_C0000 + (((AmdHeapRamAddress >> 16) & 0x3) * 2));
+ MsrData = AMD_MTRR_FIX4K_UC_DRAM;
+ LibAmdMsrWrite (HeapRamFixMtrr, &MsrData, StdHeader);
+ LibAmdMsrWrite ((HeapRamFixMtrr + 1), &MsrData, StdHeader);
+ } else if (AmdHeapRamAddress >= 0x80000) {
+ //
+ // 0x80000~0xBFFFF
+ //
+ HeapRamFixMtrr = (UINT32) (AMD_MTRR_FIX16k_80000 + ((AmdHeapRamAddress >> 17) & 0x1));
+ MsrData = AMD_MTRR_FIX16K_UC_DRAM;
+ LibAmdMsrWrite (HeapRamFixMtrr, &MsrData, StdHeader);
+ } else {
+ //
+ // 0x0 ~ 0x7FFFF
+ //
+ LibAmdMsrRead (AMD_MTRR_FIX64k_00000, &MsrData, StdHeader);
+ MsrData = MsrData & (~(0xFF << (8 * ((AmdHeapRamAddress >> 16) & 0x7))));
+ MsrData = MsrData | (AMD_MTRR_FIX64K_UC_DRAM << (8 * ((AmdHeapRamAddress >> 16) & 0x7)));
+ LibAmdMsrWrite (AMD_MTRR_FIX64k_00000, &MsrData, StdHeader);
+ }
+
+ // Turn on MTTR enable bit and turn off modification bit
+ LibAmdMsrRead (MSR_SYS_CFG, &MsrData, StdHeader);
+ MsrData |= 0x40000;
+ MsrData &= 0xFFFFFFFFFFF7FFFF;
+ LibAmdMsrWrite (MSR_SYS_CFG, &MsrData, StdHeader);
+ } else {
+ // Region above 1MB
+ // Variable MTTR region
+ // Get family specific cache Info
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &Ignored, StdHeader);
+
+ // Find an empty MTRRphysBase/MTRRphysMask
+ for (HeapRamVariableMtrr = AMD_MTRR_VARIABLE_HEAP_BASE;
+ HeapRamVariableMtrr >= AMD_MTRR_VARIABLE_BASE0;
+ HeapRamVariableMtrr--) {
+ LibAmdMsrRead (HeapRamVariableMtrr, &VariableMtrrBase, StdHeader);
+ LibAmdMsrRead ((HeapRamVariableMtrr + 1), &VariableMtrrMask, StdHeader);
+ if ((VariableMtrrBase == 0) && (VariableMtrrMask == 0)) {
+ break;
+ }
+ }
+ if (HeapRamVariableMtrr < AMD_MTRR_VARIABLE_BASE0) {
+ // All variable MTRR is used.
+ ASSERT (FALSE);
+ }
+
+ // Set variable MTRR base and mask
+ // If the address ranges of two or more MTRRs overlap
+ // and if at least one of the memory types is UC, the UC memory type is used.
+ VariableMtrrBase = (UINT64) (AmdHeapRamAddress & CacheInfoPtr->HeapBaseMask);
+ VariableMtrrMask = CacheInfoPtr->VariableMtrrHeapMask & AMD_HEAP_MTRR_MASK;
+ LibAmdMsrWrite (HeapRamVariableMtrr, &VariableMtrrBase, StdHeader);
+ LibAmdMsrWrite ((HeapRamVariableMtrr + 1), &VariableMtrrMask, StdHeader);
+ }
+ // Copying Heap content
+ if (IsBsp (StdHeader, &IgnoredStatus)) {
+ TotalSize = sizeof (HEAP_MANAGER);
+ SizeOfNodeData = 0;
+ AlignTo16ByteInTempMem = 0;
+ BaseAddressInCache = (UINT8 *)(UINT32) StdHeader->HeapBasePtr;
+ HeapManagerInCache = (HEAP_MANAGER *) BaseAddressInCache;
+ HeapInCacheOffset = HeapManagerInCache->FirstActiveBufferOffset;
+ HeapInCache = (BUFFER_NODE *) (BaseAddressInCache + HeapInCacheOffset);
+
+ BaseAddressInTempMem = (UINT8 *) (UINTN) UserOptions.CfgHeapDramAddress;
+ HeapManagerInTempMem = (HEAP_MANAGER *) BaseAddressInTempMem;
+ HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + TotalSize);
+
+ // copy heap from cache to temp memory.
+ // only heap with persist great than HEAP_LOCAL_CACHE will be copied.
+ // Note: Only copy heap with persist greater than HEAP_LOCAL_CACHE.
+ while (HeapInCacheOffset != AMD_HEAP_INVALID_HEAP_OFFSET) {
+ if (HeapInCache->Persist > HEAP_LOCAL_CACHE) {
+ AlignTo16ByteInCache = HeapInCache->PadSize;
+ AlignTo16ByteInTempMem = (UINT8) ((0x10 - (((UINTN) (VOID *) HeapInTempMem + sizeof (BUFFER_NODE) + SIZE_OF_SENTINEL) & 0xF)) & 0xF);
+ SizeOfNodeData = HeapInCache->BufferSize - AlignTo16ByteInCache;
+ TotalSize = (UINT32) (TotalSize + sizeof (BUFFER_NODE) + SizeOfNodeData + AlignTo16ByteInTempMem);
+ Source = (UINT8 *) HeapInCache + sizeof (BUFFER_NODE) + AlignTo16ByteInCache;
+ Destination = (UINT8 *) HeapInTempMem + sizeof (BUFFER_NODE) + AlignTo16ByteInTempMem;
+ LibAmdMemCopy (HeapInTempMem, HeapInCache, sizeof (BUFFER_NODE), StdHeader);
+ LibAmdMemCopy (Destination, Source, SizeOfNodeData, StdHeader);
+ HeapInTempMem->OffsetOfNextNode = TotalSize;
+ HeapInTempMem->BufferSize = SizeOfNodeData + AlignTo16ByteInTempMem;
+ HeapInTempMem->PadSize = AlignTo16ByteInTempMem;
+ HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + TotalSize);
+ }
+ HeapInCacheOffset = HeapInCache->OffsetOfNextNode;
+ HeapInCache = (BUFFER_NODE *) (BaseAddressInCache + HeapInCacheOffset);
+ }
+ // initialize heap manager
+ if (TotalSize == sizeof (HEAP_MANAGER)) {
+ // heap is empty
+ HeapManagerInTempMem->UsedSize = sizeof (HEAP_MANAGER);
+ HeapManagerInTempMem->FirstActiveBufferOffset = AMD_HEAP_INVALID_HEAP_OFFSET;
+ HeapManagerInTempMem->FirstFreeSpaceOffset = sizeof (HEAP_MANAGER);
+ } else {
+ // heap is NOT empty
+ HeapManagerInTempMem->UsedSize = TotalSize;
+ HeapManagerInTempMem->FirstActiveBufferOffset = sizeof (HEAP_MANAGER);
+ HeapManagerInTempMem->FirstFreeSpaceOffset = TotalSize;
+ HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + TotalSize - SizeOfNodeData - AlignTo16ByteInTempMem - sizeof (BUFFER_NODE));
+ HeapInTempMem->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+ HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + TotalSize);
+ }
+ // heap signature
+ HeapManagerInCache->Signature = 0x00000000;
+ HeapManagerInTempMem->Signature = HEAP_SIGNATURE_VALID;
+ // Free space node
+ HeapInTempMem->BufferSize = (UINT32) (AMD_HEAP_SIZE_PER_CORE - TotalSize);
+ HeapInTempMem->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+ }
+
+ StdHeader->HeapStatus = HEAP_TEMP_MEM;
+ StdHeader->HeapBasePtr = HeapGetBaseAddressInTempMem (StdHeader);
+
+ return AGESA_SUCCESS;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * CopyHeapToMainRamAtPost
+ *
+ * This function copies Temp Ram heap content to Main Ram
+ *
+ * @param[in,out] StdHeader - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ * @retval AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+CopyHeapToMainRamAtPost (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *BaseAddressInTempMem;
+ UINT8 *BaseAddressInMainMem;
+ UINT8 *Source;
+ UINT8 *Destination;
+ UINT8 AlignTo16ByteInTempMem;
+ UINT8 AlignTo16ByteInMainMem;
+ UINT8 Ignored;
+ UINT32 SizeOfNodeData;
+ UINT32 TotalSize;
+ UINT32 HeapInTempMemOffset;
+ UINT32 HeapRamVariableMtrr;
+ UINT64 VariableMtrrBase;
+ UINT64 VariableMtrrMask;
+ AGESA_STATUS IgnoredStatus;
+ BUFFER_NODE *HeapInTempMem;
+ BUFFER_NODE *HeapInMainMem;
+ HEAP_MANAGER *HeapManagerInTempMem;
+ HEAP_MANAGER *HeapManagerInMainMem;
+ AGESA_BUFFER_PARAMS AgesaBuffer;
+ CACHE_INFO *CacheInfoPtr;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ if (IsBsp (StdHeader, &IgnoredStatus)) {
+ TotalSize = sizeof (HEAP_MANAGER);
+ SizeOfNodeData = 0;
+ AlignTo16ByteInMainMem = 0;
+ BaseAddressInTempMem = (UINT8 *)(UINT32) StdHeader->HeapBasePtr;
+ HeapManagerInTempMem = (HEAP_MANAGER *)(UINT32) StdHeader->HeapBasePtr;
+ HeapInTempMemOffset = HeapManagerInTempMem->FirstActiveBufferOffset;
+ HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + HeapInTempMemOffset);
+
+ AgesaBuffer.StdHeader = *StdHeader;
+ AgesaBuffer.BufferHandle = AMD_HEAP_IN_MAIN_MEMORY_HANDLE;
+ AgesaBuffer.BufferLength = AMD_HEAP_SIZE_PER_CORE;
+ if (AgesaAllocateBuffer (0, &AgesaBuffer) != AGESA_SUCCESS) {
+ return AGESA_ERROR;
+ }
+ BaseAddressInMainMem = (UINT8 *) AgesaBuffer.BufferPointer;
+ HeapManagerInMainMem = (HEAP_MANAGER *) BaseAddressInMainMem;
+ HeapInMainMem = (BUFFER_NODE *) (BaseAddressInMainMem + TotalSize);
+ LibAmdMemFill (BaseAddressInMainMem, 0x00, AMD_HEAP_SIZE_PER_CORE, StdHeader);
+ // copy heap from temp memory to main memory.
+ // only heap with persist great than HEAP_TEMP_MEM will be copied.
+ // Note: Only copy heap buffers with persist greater than HEAP_TEMP_MEM.
+ while (HeapInTempMemOffset != AMD_HEAP_INVALID_HEAP_OFFSET) {
+ if (HeapInTempMem->Persist > HEAP_TEMP_MEM) {
+ AlignTo16ByteInTempMem = HeapInTempMem->PadSize;
+ AlignTo16ByteInMainMem = (UINT8) ((0x10 - (((UINTN) (VOID *) HeapInMainMem + sizeof (BUFFER_NODE) + SIZE_OF_SENTINEL) & 0xF)) & 0xF);
+ SizeOfNodeData = HeapInTempMem->BufferSize - AlignTo16ByteInTempMem;
+ TotalSize = (UINT32) (TotalSize + sizeof (BUFFER_NODE) + SizeOfNodeData + AlignTo16ByteInMainMem);
+ Source = (UINT8 *) HeapInTempMem + sizeof (BUFFER_NODE) + AlignTo16ByteInTempMem;
+ Destination = (UINT8 *) HeapInMainMem + sizeof (BUFFER_NODE) + AlignTo16ByteInMainMem;
+ LibAmdMemCopy (HeapInMainMem, HeapInTempMem, sizeof (BUFFER_NODE), StdHeader);
+ LibAmdMemCopy (Destination, Source, SizeOfNodeData, StdHeader);
+ HeapInMainMem->OffsetOfNextNode = TotalSize;
+ HeapInMainMem->BufferSize = SizeOfNodeData + AlignTo16ByteInMainMem;
+ HeapInMainMem->PadSize = AlignTo16ByteInMainMem;
+ HeapInMainMem = (BUFFER_NODE *) (BaseAddressInMainMem + TotalSize);
+ }
+ HeapInTempMemOffset = HeapInTempMem->OffsetOfNextNode;
+ HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + HeapInTempMemOffset);
+ }
+ // initialize heap manager
+ if (TotalSize == sizeof (HEAP_MANAGER)) {
+ // heap is empty
+ HeapManagerInMainMem->UsedSize = sizeof (HEAP_MANAGER);
+ HeapManagerInMainMem->FirstActiveBufferOffset = AMD_HEAP_INVALID_HEAP_OFFSET;
+ HeapManagerInMainMem->FirstFreeSpaceOffset = sizeof (HEAP_MANAGER);
+ } else {
+ // heap is NOT empty
+ HeapManagerInMainMem->UsedSize = TotalSize;
+ HeapManagerInMainMem->FirstActiveBufferOffset = sizeof (HEAP_MANAGER);
+ HeapManagerInMainMem->FirstFreeSpaceOffset = TotalSize;
+ HeapInMainMem = (BUFFER_NODE *) (BaseAddressInMainMem + TotalSize - SizeOfNodeData - AlignTo16ByteInMainMem - sizeof (BUFFER_NODE));
+ HeapInMainMem->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+ HeapInMainMem = (BUFFER_NODE *) (BaseAddressInMainMem + TotalSize);
+ }
+ // heap signature
+ HeapManagerInTempMem->Signature = 0x00000000;
+ HeapManagerInMainMem->Signature = HEAP_SIGNATURE_VALID;
+ // Free space node
+ HeapInMainMem->BufferSize = AMD_HEAP_SIZE_PER_CORE - TotalSize;
+ HeapInMainMem->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+ }
+ // if address of heap in temp memory is above 1M, then we must used one variable MTRR.
+ if ( (UINTN) StdHeader->HeapBasePtr >= 0x100000) {
+ // Find out which variable MTRR was used in CopyHeapToTempRamAtPost.
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &Ignored, StdHeader);
+ for (HeapRamVariableMtrr = AMD_MTRR_VARIABLE_HEAP_BASE;
+ HeapRamVariableMtrr >= AMD_MTRR_VARIABLE_BASE0;
+ HeapRamVariableMtrr--) {
+ LibAmdMsrRead (HeapRamVariableMtrr, &VariableMtrrBase, StdHeader);
+ LibAmdMsrRead ((HeapRamVariableMtrr + 1), &VariableMtrrMask, StdHeader);
+ if ((VariableMtrrBase == (UINT64) (UINTN) (StdHeader->HeapBasePtr & CacheInfoPtr->HeapBaseMask)) &&
+ (VariableMtrrMask == (UINT64) (CacheInfoPtr->VariableMtrrHeapMask & AMD_HEAP_MTRR_MASK))) {
+ break;
+ }
+ }
+ if (HeapRamVariableMtrr >= AMD_MTRR_VARIABLE_BASE0) {
+ // Clear variable MTRR which set in CopyHeapToTempRamAtPost.
+ VariableMtrrBase = 0;
+ VariableMtrrMask = 0;
+ LibAmdMsrWrite (HeapRamVariableMtrr, &VariableMtrrBase, StdHeader);
+ LibAmdMsrWrite ((HeapRamVariableMtrr + 1), &VariableMtrrMask, StdHeader);
+ }
+ }
+ return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * HeapGetBaseAddressInTempMem
+ *
+ * This function gets heap base address in HEAP_TEMP_MEM phase
+ *
+ * @param[in] StdHeader - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ * @retval UINT64 - Heap base address in HEAP_TEMP_MEM phase
+ *
+ */
+UINT64
+HeapGetBaseAddressInTempMem (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return UserOptions.CfgHeapDramAddress;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/agesa.inc b/src/vendorcode/amd/agesa/f16kb/Legacy/agesa.inc
new file mode 100644
index 0000000..010db87
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Legacy/agesa.inc
@@ -0,0 +1,3299 @@
+; ****************************************************************************
+; *
+; * @file
+; *
+; * Agesa structures and definitions
+; *
+; * Contains AMD AGESA core interface
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project: AGESA
+; * @e sub-project: Include
+; * @e \$Revision: 85818 $ @e \$Date: 2013-01-11 17:04:21 -0600 (Fri, 11 Jan 2013) $
+;
+; ****************************************************************************
+; *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; *
+; **************************************************************************
+
+INCLUDE amd.inc
+UINT64 TEXTEQU <QWORD>
+UINT32 TEXTEQU <DWORD>
+UINT16 TEXTEQU <WORD>
+UINT8 TEXTEQU <BYTE>
+INT8 TEXTEQU <BYTE>
+CHAR8 TEXTEQU <BYTE>
+BOOLEAN TEXTEQU <BYTE>
+POINTER TEXTEQU <DWORD>
+
+ ; AGESA Types and Definitions
+
+
+
+ ; AGESA BASIC CALLOUTS
+ AGESA_MEM_RELEASE EQU 00028000h
+
+ ; AGESA ADVANCED CALLOUTS, Processor
+ AGESA_CHECK_UMA EQU 00028100h
+ AGESA_DO_RESET EQU 00028101h
+ AGESA_ALLOCATE_BUFFER EQU 00028102h
+ AGESA_DEALLOCATE_BUFFER EQU 00028103h
+ AGESA_LOCATE_BUFFER EQU 00028104h
+ AGESA_RUNFUNC_ONAP EQU 00028105h
+
+ ; AGESA ADVANCED CALLOUTS, HyperTransport
+
+ ; AGESA ADVANCED CALLOUTS, Memory
+ AGESA_READ_SPD EQU 00028140h
+ AGESA_HOOKBEFORE_DRAM_INIT EQU 00028141h
+ AGESA_HOOKBEFORE_DQS_TRAINING EQU 00028142h
+ AGESA_READ_SPD_RECOVERY EQU 00028143h
+ AGESA_HOOKBEFORE_EXIT_SELF_REF EQU 00028144h
+ AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY EQU 00028145h
+ AGESA_EXTERNAL_2D_TRAIN_VREF_CHANGE EQU 00028146h
+ AGESA_EXTERNAL_VOLTAGE_ADJUST EQU 00028147h
+
+ ; AGESA IDS CALLOUTS
+ AGESA_GET_IDS_INIT_DATA EQU 00028200h
+
+ ; AGESA GNB CALLOUTS
+ AGESA_GNB_PCIE_SLOT_RESET EQU 00028301h
+ AGESA_GNB_GFX_GET_VBIOS_IMAGE EQU 00028302h
+
+ ; AGESA FCH CALLOUTS
+ AGESA_FCH_OEM_CALLOUT EQU 00028401h
+
+; ------------------------------------------------------------------------
+
+ ; HyperTransport Interface
+
+
+
+; -----------------------------------------------------------------------------
+ ; HT DEFINITIONS AND MACROS
+
+; -----------------------------------------------------------------------------
+
+
+ ; Width equates for call backs
+ HT_WIDTH_8_BITS EQU 8
+ HT_WIDTH_16_BITS EQU 16
+ HT_WIDTH_4_BITS EQU 4
+ HT_WIDTH_2_BITS EQU 2
+ HT_WIDTH_NO_LIMIT EQU HT_WIDTH_16_BITS
+
+ ; Frequency Limit equates for call backs which take a frequency supported mask.
+ HT_FREQUENCY_LIMIT_200M EQU 1
+ HT_FREQUENCY_LIMIT_400M EQU 7
+ HT_FREQUENCY_LIMIT_600M EQU 1Fh
+ HT_FREQUENCY_LIMIT_800M EQU 3Fh
+ HT_FREQUENCY_LIMIT_1000M EQU 7Fh
+ HT_FREQUENCY_LIMIT_HT1_ONLY EQU 7Fh
+ HT_FREQUENCY_LIMIT_1200M EQU 0FFh
+ HT_FREQUENCY_LIMIT_1400M EQU 1FFh
+ HT_FREQUENCY_LIMIT_1600M EQU 3FFh
+ HT_FREQUENCY_LIMIT_1800M EQU 7FFh
+ HT_FREQUENCY_LIMIT_2000M EQU 0FFFh
+ HT_FREQUENCY_LIMIT_2200M EQU 1FFFh
+ HT_FREQUENCY_LIMIT_2400M EQU 3FFFh
+ HT_FREQUENCY_LIMIT_2600M EQU 7FFFh
+ HT_FREQUENCY_LIMIT_2800M EQU 27FFFh
+ HT_FREQUENCY_LIMIT_3000M EQU 67FFFh
+ HT_FREQUENCY_LIMIT_3200M EQU 0E7FFFh
+ HT_FREQUENCY_LIMIT_3600M EQU 1E7FFFh
+ HT_FREQUENCY_LIMIT_MAX EQU HT_FREQUENCY_LIMIT_3600M
+ HT_FREQUENCY_NO_LIMIT EQU 0FFFFFFFFh
+
+ ; Unit ID Clumping special values
+ HT_CLUMPING_DISABLE EQU 00000000h
+ HT_CLUMPING_NO_LIMIT EQU 0FFFFFFFFh
+
+ HT_LIST_TERMINAL EQU 0FFh
+ HT_LIST_MATCH_ANY EQU 0FEh
+ HT_LIST_MATCH_INTERNAL_LINK EQU 0FDh
+
+ ; Event Notify definitions
+
+ ; Event definitions.
+
+ ; Coherent subfunction events
+ HT_EVENT_COH_EVENTS EQU 10001000h
+ HT_EVENT_COH_NO_TOPOLOGY EQU 10011000h
+ HT_EVENT_COH_OBSOLETE000 EQU 10021000h
+ HT_EVENT_COH_PROCESSOR_TYPE_MIX EQU 10031000h
+ HT_EVENT_COH_NODE_DISCOVERED EQU 10041000h
+ HT_EVENT_COH_MPCAP_MISMATCH EQU 10051000h
+
+ ; Non-coherent subfunction events
+ HT_EVENT_NCOH_EVENTS EQU 10002000h
+ HT_EVENT_NCOH_BUID_EXCEED EQU 10012000h
+ HT_EVENT_NCOH_OBSOLETE000 EQU 10022000h
+ HT_EVENT_NCOH_BUS_MAX_EXCEED EQU 10032000h
+ HT_EVENT_NCOH_CFG_MAP_EXCEED EQU 10042000h
+ HT_EVENT_NCOH_DEVICE_FAILED EQU 10052000h
+ HT_EVENT_NCOH_AUTO_DEPTH EQU 10062000h
+
+ ; Optimization subfunction events
+ HT_EVENT_OPT_EVENTS EQU 10003000h
+ HT_EVENT_OPT_REQUIRED_CAP_RETRY EQU 10013000h
+ HT_EVENT_OPT_REQUIRED_CAP_GEN3 EQU 10023000h
+ HT_EVENT_OPT_UNUSED_LINKS EQU 10033000h
+ HT_EVENT_OPT_LINK_PAIR_EXCEED EQU 10043000h
+
+ ; HW Fault events
+ HT_EVENT_HW_EVENTS EQU 10004000h
+ HT_EVENT_HW_SYNCFLOOD EQU 10014000h
+ HT_EVENT_HW_HTCRC EQU 10024000h
+
+ ; The Recovery HT component uses 0x10005000 for events.
+ ; For consistency, we avoid that range here.
+
+ HT_MAX_NC_BUIDS EQU 32
+; ----------------------------------------------------------------------------
+ ; HT TYPEDEFS, STRUCTURES, ENUMS
+
+; ----------------------------------------------------------------------------
+MATCHED EQU 0 ; < The link matches the requested customization.
+POWERED_OFF EQU 1 ; < Power the link off.
+UNMATCHED EQU 2 ; < The link should be processed according to normal defaults.
+MaxFinalLinkState EQU 3 ; < Not a final link state, use for limit checking.
+FINAL_LINK_STATE TEXTEQU <DWORD>
+
+ ; Swap a device from its current id to a new one.
+
+BUID_SWAP_ITEM STRUCT
+ FromId UINT8 ? ; < The device responding to FromId,
+ ToId UINT8 ? ; < will be moved to ToId.
+BUID_SWAP_ITEM ENDS
+
+
+ ; Each Non-coherent chain may have a list of device swaps. After performing the swaps,
+ ; the final in order list of device ids is provided. (There can be more swaps than devices.)
+ ; The unused entries in both are filled with 0xFF.
+
+BUID_SWAP_LIST STRUCT
+ Swaps BUID_SWAP_ITEM (HT_MAX_NC_BUIDS) DUP ({}) ; < The BUID Swaps to perform
+ FinalIds UINT8 (HT_MAX_NC_BUIDS) DUP (?) ; < The ordered final BUIDs, resulting from the swaps
+BUID_SWAP_LIST ENDS
+
+
+ ; Control Manual Initialization of Non-Coherent Chains
+
+ ; This interface is checked every time a non-coherent chain is
+ ; processed. BUID assignment may be controlled explicitly on a
+ ; non-coherent chain. Provide a swap list. Swaps controls the
+ ; BUID assignment and FinalIds provides the device to device
+ ; Linking. Device orientation can be detected automatically, or
+ ; explicitly. See interface documentation for more details.
+
+ ; If a manual swap list is not supplied,
+ ; automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially
+ ; based on each device's unit count.
+
+MANUAL_BUID_SWAP_LIST STRUCT
+ ; Match fields
+ Socket UINT8 ? ; < The Socket on which this chain is located
+ Link UINT8 ? ; < The Link on the host for this chain
+ ; Override fields
+ SwapList BUID_SWAP_LIST {} ; < The swap list
+MANUAL_BUID_SWAP_LIST ENDS
+
+
+ ; Override options for DEVICE_CAP_OVERRIDE.
+
+ ; Specify which override actions should be performed. For Checks, 1 means to check the item
+ ; and 0 means to skip the check. For the override options, 1 means to apply the override and
+ ; 0 means to ignore the override.
+
+DEVICE_CAP_OVERRIDE_OPTIONS STRUCT
+ IsCheckDevVenId UINT32 ?
+; IN UINT32 IsCheckDevVenId:1; ; < Check Match on Device/Vendor id
+; IN UINT32 IsCheckRevision:1; ; < Check Match on device Revision
+; IN UINT32 IsOverrideWidthIn:1; ; < Override Width In
+; IN UINT32 IsOverrideWidthOut:1; ; < Override Width Out
+; IN UINT32 IsOverrideFreq:1; ; < Override Frequency
+; IN UINT32 IsOverrideClumping:1; ; < Override Clumping
+; IN UINT32 IsDoCallout:1; ; < Make the optional callout
+DEVICE_CAP_OVERRIDE_OPTIONS ENDS
+
+ ; Override capabilities of a device.
+
+ ; This interface is checked once for every Link on every IO device.
+ ; Provide the width and frequency capability if needed for this device.
+ ; This is used along with device capabilities, the limit interfaces, and northbridge
+ ; limits to compute the default settings. The components of the device's PCI config
+ ; address are provided, so its settings can be consulted if need be.
+ ; The optional callout is a catch all.
+
+DEVICE_CAP_OVERRIDE STRUCT
+ ; Match fields
+ HostSocket UINT8 ? ; < The Socket on which this chain is located.
+ HostLink UINT8 ? ; < The Link on the host for this chain.
+ Depth UINT8 ? ; < The Depth in the I/O chain from the Host.
+ DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00).
+ Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08).
+ Link UINT8 ? ; < The Device's Link number (0 or 1).
+ Options DEVICE_CAP_OVERRIDE_OPTIONS {} ; < The options for this device override.
+ ; Override fields
+ LinkWidthIn UINT8 ? ; < modify to change the Link Width In.
+ LinkWidthOut UINT8 ? ; < modify to change the Link Width Out.
+ FreqCap UINT32 ? ; < modify to change the Link's frequency capability.
+ Clumping UINT32 ? ; < modify to change Unit ID clumping support.
+ Callout CALLOUT_ENTRY ? ; < optional call for really complex cases, or NULL.
+DEVICE_CAP_OVERRIDE ENDS
+
+ ; Callout param struct for override capabilities of a device.
+
+ ; If the optional callout is implemented this param struct is passed to it.
+
+DEVICE_CAP_CALLOUT_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < The header
+ ; Match fields
+ HostSocket UINT8 ? ; < The Socket on which this chain is located.
+ HostLink UINT8 ? ; < The Link on the host for this chain.
+ Depth UINT8 ? ; < The Depth in the I/O chain from the Host.
+ DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00).
+ Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08).
+ Link UINT8 ? ; < The Device's Link number (0 or 1).
+ PciAddress PCI_ADDR {} ; < The Device's PCI Address.
+ ; Override fields
+ LinkWidthIn POINTER ? ; < modify to change the Link Width In.
+ LinkWidthOut POINTER ? ; < modify to change the Link Width Out.
+ FreqCap POINTER ? ; < modify to change the Link's frequency capability.
+ Clumping POINTER ? ; < modify to change Unit ID clumping support.
+DEVICE_CAP_CALLOUT_PARAMS ENDS
+
+ ; Limits for CPU to CPU Links.
+
+ ; For each coherent connection this interface is checked once.
+ ; Provide the frequency and width if needed for this Link (usually based on board
+ ; restriction). This is used with CPU device capabilities and northbridge limits
+ ; to compute the default settings.
+
+CPU_TO_CPU_PCB_LIMITS STRUCT
+ ; Match fields
+ SocketA UINT8 ? ; < One Socket on which this Link is located
+ LinkA UINT8 ? ; < The Link on this Node
+ SocketB UINT8 ? ; < The other Socket on which this Link is located
+ LinkB UINT8 ? ; < The Link on that Node
+ ; Limit fields
+ ABLinkWidthLimit UINT8 ? ; < modify to change the Link Width A->B
+ BALinkWidthLimit UINT8 ? ; < modify to change the Link Width B-<A
+ PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability
+CPU_TO_CPU_PCB_LIMITS ENDS
+
+ ; Get limits for non-coherent Links.
+
+ ; For each non-coherent connection this interface is checked once.
+ ; Provide the frequency and width if needed for this Link (usually based on board
+ ; restriction). This is used with device capabilities, device overrides, and northbridge limits
+ ; to compute the default settings.
+
+IO_PCB_LIMITS STRUCT
+ ; Match fields
+ HostSocket UINT8 ? ; < The Socket on which this Link is located
+ HostLink UINT8 ? ; < The Link about to be initialized
+ Depth UINT8 ? ; < The Depth in the I/O chain from the Host
+ ; Limit fields
+ DownstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width going away from processor
+ UpstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width moving toward processor
+ PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability
+IO_PCB_LIMITS ENDS
+
+ ; Manually control bus number assignment.
+
+ ; This interface is checked every time a non-coherent chain is processed.
+ ; If a system can not use the auto Bus numbering feature for non-coherent chain bus
+ ; assignments, this interface can provide explicit control. For each chain, provide
+ ; the bus number range to use.
+
+OVERRIDE_BUS_NUMBERS STRUCT
+ ; Match fields
+ Socket UINT8 ? ; < The Socket on which this chain is located
+ Link UINT8 ? ; < The Link on the host for this chain
+ ; Override fields
+ SecBus UINT8 ? ; < Secondary Bus number for this non-coherent chain
+ SubBus UINT8 ? ; < Subordinate Bus number
+OVERRIDE_BUS_NUMBERS ENDS
+
+
+ ; Ignore a Link.
+
+ ; This interface is checked every time a coherent Link is found and then every
+ ; time a non-coherent Link from a CPU is found.
+ ; Any coherent or non-coherent Link from a CPU can be ignored and not used
+ ; for discovery or initialization. Useful for connection based systems.
+ ; (Note: not checked for IO device to IO Device Links.)
+
+IGNORE_LINK STRUCT
+ ; Match fields
+ Socket UINT8 ? ; < The Socket on which this Link is located
+ Link UINT8 ? ; < The Link about to be initialized
+ ; Customization fields
+ LinkState FINAL_LINK_STATE ? ; < The link may be left unitialized, or powered off.
+IGNORE_LINK ENDS
+
+
+ ; Skip reganging of subLinks.
+
+ ; This interface is checked whenever two subLinks are both connected to the same CPUs.
+ ; Normally, unganged sublinks between the same two CPUs are reganged.
+ ; Provide a matching structure to leave the Links unganged.
+
+SKIP_REGANG STRUCT
+ ; Match fields
+ SocketA UINT8 ? ; < One Socket on which this Link is located
+ LinkA UINT8 ? ; < The Link on this Node
+ SocketB UINT8 ? ; < The other Socket on which this Link is located
+ LinkB UINT8 ? ; < The Link on that Node
+ ; Customization fields
+ LinkState FINAL_LINK_STATE ? ; < The paired sublink may be active, or powered off.
+SKIP_REGANG ENDS
+
+ ; The System Socket layout, which sockets are physically connected.
+
+ ; The hardware method for Socket naming is preferred. Use this software method only
+ ; if required.
+
+SYSTEM_PHYSICAL_SOCKET_MAP STRUCT
+ CurrentSocket UINT8 ? ; < The socket from which this connection originates.
+ CurrentLink UINT8 ? ; < The Link from the source socket connects to another socket.
+ TargetSocket UINT8 ? ; < The target socket which is connected on that link.
+SYSTEM_PHYSICAL_SOCKET_MAP ENDS
+
+; ----------------------------------------------------------------------------
+
+ ; This is the input structure for AmdHtInitialize.
+
+AMD_HT_INTERFACE STRUCT
+ ; Basic level customization
+ AutoBusStart UINT8 ? ; < For automatic bus number assignment, starting bus number usually zero.
+ AutoBusMax UINT8 ? ; < For automatic bus number assignment, do not assign above max.
+ AutoBusIncrement UINT8 ? ; < For automatic bus number assignment, each chain gets this many busses.
+
+ ; Advanced Level Customization
+ ManualBuidSwapList POINTER ? ; < Provide Manual Swap List, if any.
+ DeviceCapOverrideList POINTER ? ; < Provide Device Overrides, if any.
+ CpuToCpuPcbLimitsList POINTER ? ; < Provide CPU PCB Limits, if any.
+ IoPcbLimitsList POINTER ? ; < Provide IO PCB Limits, if any.
+ OverrideBusNumbersList POINTER ? ; < Provide manual Bus Number assignment, if any.
+ ; < Use either auto bus numbering or override bus
+ ; < numbers, not both.
+
+ IgnoreLinkList POINTER ? ; < Provide links to ignore, if any.
+ SkipRegangList POINTER ? ; < Provide links to remain unganged, if any.
+
+ ; Expert Level Customization
+ Topolist POINTER ? ; < Use this topology list in addition to the built in, if not NULL.
+ SystemPhysicalSocketMap POINTER ?
+ ; < The hardware socket naming method is preferred,
+ ; < If it can't be used, this provides a software method.
+AMD_HT_INTERFACE ENDS
+
+; -----------------------------------------------------------------------------
+
+ ; HT Recovery Interface
+
+
+
+; -----------------------------------------------------------------------------
+; * HT Recovery DEFINITIONS AND MACROS
+; *
+; *-----------------------------------------------------------------------------
+;
+
+ ; BBHT subfunction events
+ HT_EVENT_BB_EVENTS EQU 10005000h
+ HT_EVENT_BB_BUID_EXCEED EQU 10015000h
+ HT_EVENT_BB_DEVICE_FAILED EQU 10055000h
+ HT_EVENT_BB_AUTO_DEPTH EQU 10065000h
+
+; ----------------------------------------------------------------------------
+; * HT Recovery TYPEDEFS, STRUCTURES, ENUMS
+; *
+; *----------------------------------------------------------------------------
+;
+
+
+ ; The Interface structure to Recovery HT.
+
+AMD_HT_RESET_INTERFACE STRUCT
+ ManualBuidSwapList POINTER ? ; < Option to manually control SB link init
+ Depth UINT32 ? ; < If auto init was used this is set to the depth of the chain,
+ ; < else, for manual init unmodified.
+AMD_HT_RESET_INTERFACE ENDS
+
+
+;-----------------------------------------------------------------------------
+; FCH DEFINITIONS AND MACROS
+;
+;-----------------------------------------------------------------------------
+
+; Configuration values for SdConfig
+ SdDisable EQU 0 ; Disabled
+ SdAmda EQU 1 ; AMDA, set 24,18,16, default
+ SdDma EQU 2 ; DMA clear 24, 16, set 18
+ SdPio EQU 3 ; PIO clear 24,18,16
+SD_MODE TEXTEQU <DWORD>
+
+; Configuration values for SdClockControl
+ Sd50MhzTraceCableLengthWithinSixInches EQU 4 ; 50Mhz, default
+ Sd40MhzTraceCableLengthSix2ElevenInches EQU 6 ; 40Mhz
+ Sd25MhzTraceCableLengthEleven2TwentyfourInches EQU 7 ; 25Mhz
+SD_CLOCK_CONTROL TEXTEQU <DWORD>
+
+; Configuration values for AzaliaController
+ AzAuto EQU 0 ; Auto - Detect Azalia controller automatically
+ AzDisable EQU 1 ; Diable - Disable Azalia controller
+ AzEnable EQU 2 ; Enable - Enable Azalia controller
+HDA_CONFIG TEXTEQU <DWORD>
+
+; Configuration values for IrConfig
+ IrDisable EQU 0 ; Disable
+ IrRxTx0 EQU 1 ; Rx and Tx0
+ IrRxTx1 EQU 2 ; Rx and Tx1
+ IrRxTx0Tx1 EQU 3 ; Rx and both Tx0,Tx1
+IR_CONFIG TEXTEQU <DWORD>
+
+; Configuration values for SataClass
+ SataNativeIde EQU 0 ; Native IDE mode
+ SataRaid EQU 1 ; RAID mode
+ SataAhci EQU 2 ; AHCI mode
+ SataLegacyIde EQU 3 ; Legacy IDE mode
+ SataIde2Ahci EQU 4 ; IDE->AHCI mode
+ SataAhci7804 EQU 5 ; AHCI mode as 7804 ID (AMD driver)
+ SataIde2Ahci7804 EQU 6 ; IDE->AHCI mode as 7804 ID (AMD driver)
+SATA_CLASS TEXTEQU <DWORD>
+
+; Configuration values for GppLinkConfig
+ PortA4 EQU 0 ; 4:0:0:0
+ PortA2B2 EQU 2 ; 2:2:0:0
+ PortA2B1C1 EQU 3 ; 2:1:1:0
+ PortA1B1C1D1 EQU 4 ; 1:1:1:1
+GPP_LINKMODE TEXTEQU <DWORD>
+
+; Configuration values for FchPowerFail
+ AlwaysOff EQU 0 ; Always power off after power resumes
+ AlwaysOn EQU 1 ; Always power on after power resumes
+ UsePrevious EQU 3 ; Resume to same setting when power fails
+POWER_FAIL TEXTEQU <DWORD>
+
+; Configuration values for SATA Link Speed
+ Gen1 EQU 1 ; SATA port GEN1 speed
+ Gen2 EQU 2 ; SATA port GEN2 speed
+ Gen3 EQU 3 ; SATA port GEN3 speed
+SATA_SPEED TEXTEQU <DWORD>
+
+; Configuration values for GPIO function
+ Function0 EQU 0 ; GPIO Function 1
+ Function1 EQU 1 ; GPIO Function 1
+ Function2 EQU 2 ; GPIO Function 2
+ Function3 EQU 3 ; GPIO Function 3
+GPIO_FUN TEXTEQU <DWORD>
+
+; Configuration values for GPIO_CFG
+ OwnedByEc EQU 1 ; This bit can only be written by EC
+ OwnedByHost EQU 2 ; This bit can only be written by host (BIOS)
+ Sticky EQU 4 ; If set, [6:3] are sticky
+ PullUpB EQU 8 ; 0: Pullup enable; 1: Pullup disabled
+ PullDown EQU 16 ; 0: Pulldown disabled; 1: Pulldown enable
+ GpioOutEnB EQU 32 ; 0: Output enable; 1: Output disable
+ GpioOut EQU 64 ; Output state when GpioOutEnB is 0
+ GpioIn EQU 128 ; This bit is read only - current pin state
+CFG_BYTE TEXTEQU <DWORD>
+
+; FCH GPIO CONTROL
+GPIO_CONTROL STRUCT
+ GpioPin UINT8 ? ; Gpio Pin, valid range: 0-67, 128-150, 160-228
+ PinFunction GPIO_FUN ? ; Multi-function selection
+ CfgByte CFG_BYTE ? ; GPIO Register value
+GPIO_CONTROL ENDS
+
+; FCH SCI MAP CONTROL
+SCI_MAP_CONTROL STRUCT
+ InputPin UINT8 ? ; Input Pin, valid range 0-63
+ GpeMap UINT8 ? ; Gpe Map, valid range 0-31
+SCI_MAP_CONTROL ENDS
+
+; FCH SATA PHY CONTROL
+SATA_PHY_CONTROL STRUCT
+ CommonPhy BOOLEAN ? ; Common PHY or not
+ Gen SATA_SPEED ? ; SATA speed
+ Port UINT8 ? ; Port number, valid range: 0-7
+ PhyData UINT32 ? ; SATA PHY data, valid range: 0-0xFFFFFFFF
+SATA_PHY_CONTROL ENDS
+
+;
+; FCH Component Data Structure in InitReset stage
+;
+FCH_RESET_INTERFACE STRUCT
+ UmiGen2 BOOLEAN ? ; Enable Gen2 data rate of UMI
+ ; FALSE - Disable Gen2
+ ; TRUE - Enable Gen2
+
+ SataEnable BOOLEAN ? ; SATA controller function
+ ; FALSE - SATA controller is disabled
+ ; TRUE - SATA controller is enabled
+
+ IdeEnable BOOLEAN ? ; SATA IDE controller mode enabled/disabled
+ ; FALSE - IDE controller is disabled
+ ; TRUE - IDE controller is enabled
+
+ GppEnable BOOLEAN ? ; Master switch of GPP function
+ ; FALSE - GPP disabled
+ ; TRUE - GPP enabled
+
+ Xhci0Enable BOOLEAN ? ; XHCI0 controller function
+ ; FALSE - XHCI0 controller disabled
+ ; TRUE - XHCI0 controller enabled
+
+ Xhci1Enable BOOLEAN ? ; XHCI1 controller function
+ ; FALSE - XHCI1 controller disabled
+ ; TRUE - XHCI1 controller enabled
+
+FCH_RESET_INTERFACE ENDS
+
+
+;
+; FCH Component Data Structure from InitEnv stage
+;
+FCH_INTERFACE STRUCT
+ SdConfig SD_MODE ? ; Secure Digital (SD) controller mode
+ AzaliaController HDA_CONFIG ? ; Azalia HD Audio Controller
+ IrConfig IR_CONFIG ? ; Infrared (IR) Configuration
+ UmiGen2 BOOLEAN ? ; Enable Gen2 data rate of UMI
+ ; FALSE - Disable Gen2
+ ; TRUE - Enable Gen2
+ SataClass SATA_CLASS ? ; SATA controller mode
+ SataEnable BOOLEAN ? ; SATA controller function
+ ; FALSE - SATA controller is disabled
+ ; TRUE - SATA controller is enabled
+ IdeEnable BOOLEAN ? ; SATA IDE controller mode enabled/disabled
+ ; FALSE - IDE controller is disabled
+ ; TRUE - IDE controller is enabled
+ SataIdeMode BOOLEAN ? ; Native mode of SATA IDE controller
+ ; FALSE - Legacy IDE mode
+ ; TRUE - Native IDE mode
+ Ohci1Enable BOOLEAN ? ; OHCI controller #1 Function
+ ; FALSE - OHCI1 is disabled
+ ; TRUE - OHCI1 is enabled
+ Ohci2Enable BOOLEAN ? ; OHCI controller #2 Function
+ ; FALSE - OHCI2 is disabled
+ ; TRUE - OHCI2 is enabled
+ Ohci3Enable BOOLEAN ? ; OHCI controller #3 Function
+ ; FALSE - OHCI3 is disabled
+ ; TRUE - OHCI3 is enabled
+ Ohci4Enable BOOLEAN ? ; OHCI controller #4 Function
+ ; FALSE - OHCI4 is disabled
+ ; TRUE - OHCI4 is enabled
+ XhciSwitch BOOLEAN ? ; XHCI controller Function
+ ; FALSE - XHCI is disabled
+ ; TRUE - XHCI is enabled
+ GppEnable BOOLEAN ? ; Master switch of GPP function
+ ; FALSE - GPP disabled
+ ; TRUE - GPP enabled
+ FchPowerFail POWER_FAIL ? ; FCH power failure option
+FCH_INTERFACE ENDS
+
+
+; ---------------------------------------------------------------------------
+; CPU Feature related info
+; ---------------------------------------------------------------------------
+ ; Build Configuration values for BLDCFG_PLATFORM_C1E_MODE
+ C1eModeDisabled EQU 0 ; < Disabled
+ C1eModeAuto EQU 1 ; < Auto mode enables the best C1e method for the
+ ; < currently installed processor
+ C1eModeHardware EQU 2 ; < Hardware method
+ C1eModeMsgBased EQU 3 ; < Message-based method
+ C1eModeSoftwareDeprecated EQU 4 ; < Deprecated software SMI method
+ C1eModeHardwareSoftwareDeprecated EQU 5 ; < Hardware or Deprecated software SMI method
+ MaxC1eMode EQU 6 ; < Not a valid value, used for verifying input
+PLATFORM_C1E_MODES TEXTEQU <DWORD>
+
+ ; Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE
+ CStateModeDisabled EQU 0 ; < Disabled
+ CStateModeC6 EQU 1 ; < C6 State
+ MaxCStateMode EQU 2 ; < Not a valid value, used for verifying input
+PLATFORM_CSTATE_MODES TEXTEQU <DWORD>
+
+ ; Build Configuration values for BLDCFG_PLATFORM_CPB_MODE
+ CpbModeAuto EQU 0 ; < Auto
+ CpbModeDisabled EQU 1 ; < Disabled
+ MaxCpbMode EQU 2 ; < Not a valid value, used for verifying input
+PLATFORM_CPB_MODES TEXTEQU <DWORD>
+
+ ; Build Configuration values for BLDCFG_LOW_POWER_PSTATE_FOR_PROCHOT_MODE
+ LOW_POWER_PSTATE_FOR_PROCHOT_AUTO EQU 0 ; < Auto
+ LOW_POWER_PSTATE_FOR_PROCHOT_DISABLE EQU 1 ; < Disabled
+ MAX_LOW_POWER_PSTATE_FOR_PROCHOT_MODE EQU 2 ; < Not a valid value, used for verifying input
+PLATFORM_LOW_POWER_PSTATE_MODES TEXTEQU <DWORD>
+
+ ; Build Configuration values for BLDCFG_ACPI_PSTATES_PSD_POLICY
+ PsdPolicyProcessorDefault EQU 0 ; PSD is dependent or independent per processor default
+ PsdPolicyDependent EQU 1 ; PSD is forced dependent
+ PsdPolicyIndependent EQU 2 ; PSD is forced independent
+ PsdPolicyMax EQU 3 ; Not a valid value, used for verifying input
+
+
+;----------------------------------------------------------------------------
+; GNB PCIe configuration info
+;----------------------------------------------------------------------------
+
+GNB_EVENT_INVALID_CONFIGURATION EQU 20010000h ; User configuration invalid
+GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION EQU 20010001h ; Requested lane allocation for PCIe port can not be supported
+GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION EQU 20010002h ; Requested incorrect PCIe port device address
+GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION EQU 20010003h ; Incorrect parameter in DDI link configuration
+GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION EQU 20010004h ; Invalid with for PCIe port or DDI link
+GNB_EVENT_INVALID_LANES_CONFIGURATION EQU 20010005h ; Lane double subscribe lanes
+GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION EQU 20010006h ; Requested lane allocation for DDI link(s) can not be supported
+GNB_EVENT_LINK_TRAINING_FAIL EQU 20020000h ; PCIe Link training fail
+GNB_EVENT_BROKEN_LANE_RECOVERY EQU 20030000h ; Broken lane workaround applied to recover link training
+GNB_EVENT_GEN2_SUPPORT_RECOVERY EQU 20040000h ; Scale back to GEN1 to recover link training
+
+DESCRIPTOR_TERMINATE_LIST EQU 80000000h
+DESCRIPTOR_IGNORE EQU 40000000h
+
+; PCIe link initialization
+
+EndpointDetect EQU 0 ;Detect endpoint presence
+EndpointNotPresent EQU 1 ;Endpoint not present (or connected). Used in case there is alternative way to determine
+ ;if device present on board or in slot. For example GPIO can be used to determine device presence.
+PCIE_ENDPOINT_STATUS TEXTEQU <DWORD>
+
+PCIe_PORT_MISC_CONTROL STRUCT
+ LinkComplianceMode UINT8 ?
+ ;IN UINT8 LinkComplianceMode :1; ;< Force port into compliance mode (device will not be trained, port output compliance pattern)
+PCIe_PORT_MISC_CONTROL ENDS
+
+APIC_DEVICE_INFO STRUCT
+ GroupMap UINT8 ? ; < Group mapping for slot or endpoint device (connected to PCIE port) interrupts .
+ ; 0 - IGNORE THIS STRUCTURE and use recommended settings
+ ; 1 - mapped to Grp 0 (Interrupts 0..3 of IO APIC redirection table)
+ ; 2 - mapped to Grp 1 (Interrupts 4..7 of IO APIC redirection table)
+ ; ...
+ ; 8 - mapped to Grp 7 (Interrupts 28..31 of IO APIC redirection table)
+ Swizzle UINT8 ? ;< Swizzle interrupt in the Group.
+ ; 0 - ABCD
+ ; 1 - BCDA
+ ; 2 - CDAB
+ ; 3 - DABC
+ BridgeInt UINT8 ? ; < IOAPIC redirection table entry for PCIE bridge interrupt
+ ; 0 - Entry 0 of IO APIC redirection table
+ ; 1 - Entry 1 of IO APIC redirection table
+ ; ...
+ ; 31 - Entry 31 of IO APIC redirection table
+APIC_DEVICE_INFO ENDS
+
+PCIe_PORT_DATA STRUCT
+ PortPresent UINT8 ? ; < Enable PCIe port for initialization.
+ ChannelType UINT8 ? ; < Channel type.
+ ; 0 - "lowLoss",
+ ; 1 - "highLoss",
+ ; 2 - "mob0db",
+ ; 3 - "mob3db",
+ ; 4 - "extnd6db"
+ ; 5 - "extnd8db"
+ ;
+ DeviceNumber UINT8 ? ; < Device number for port. Available device numbers may very on different CPUs.
+ FunctionNumber UINT8 ? ; < Reserved for future use
+ LinkSpeedCapability UINT8 ? ; < Advertised Gen Capability
+ ; 0 - Maximum supported by silicon
+ ; 1 - Gen1
+ ; 2 - Gen2
+ ; 3 - Gen3
+ ;
+ LinkAspm UINT8 ? ; < ASPM control. (see OemPcieLinkAspm for additional option to control ASPM)
+ ; 0 - Disabled
+ ; 1 - L0s only
+ ; 2 - L1 only
+ ; 2 - L0s and L1
+ ;
+ LinkHotplug UINT8 ? ; < Hotplug control.
+ ; 0 - Disabled
+ ; 1 - Basic
+ ; 2 - Server
+ ; 3 - Enhanced
+ ;
+ ResetId UINT8 ? ; < Arbitrary number greater than 0 assigned by platform firmware for GPIO
+ ; identification which control reset for given port.
+ ; Each port with unique GPIO should have unique ResetId assigned.
+ ; All ports use same GPIO to control reset should have same ResetId assigned.
+ ; see AgesaPcieSlotResetControl
+ ;
+ MiscControls PCIe_PORT_MISC_CONTROL {} ; < Misc extended controls
+ ApicDeviceInfo APIC_DEVICE_INFO {} ; < IOAPIC device programming info
+ EndpointStatus PCIE_ENDPOINT_STATUS ? ; < PCIe endpoint status
+PCIe_PORT_DATA ENDS
+
+;DDI channel lane mapping
+
+CHANNEL_MAPPING STRUCT ;
+ Lane0 UINT8 ? ;
+ ;IN UINT8 Lane0 :2; ;
+ ;IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping")
+ ;IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping")
+ ;IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping")
+CHANNEL_MAPPING ENDS ;
+
+CONN_CHANNEL_MAPPING UNION
+ ChannelMappingValue UINT8 ? ; < Raw lane mapping
+ ChannelMapping CHANNEL_MAPPING {} ;
+CONN_CHANNEL_MAPPING ENDS ;
+
+; DDI Configuration
+PCIe_DDI_DATA STRUCT
+ ConnectorType UINT8 ? ; < Display Connector Type
+ ; 0 - DP
+ ; 1 - eDP
+ ; 2 - Single Link DVI
+ ; 3 - Dual Link DVI
+ ; 4 - HDMI
+ ; 5 - DP-to-VGA
+ ; 6 - DP-to-LVDS
+ ; 7 - Hudson-2 NutMeg DP-to-VGA
+ ; 8 - Single Link DVI-I
+ ; 9 - CRT (VGA)
+ ; 10 - LVDS
+ ; 11 - VBIOS auto detect connector type
+ AuxIndex UINT8 ? ; < Indicates which AUX or DDC Line is used
+ ; 0 - AUX1
+ ; 1 - AUX2
+ ; 2 - AUX3
+ ; 3 - AUX4
+ ; 4 - AUX5
+ ; 5 - AUX6
+ ;
+ HdpIndex UINT8 ? ; < Indicates which HDP pin is used
+ ; 0 - HDP1
+ ; 1 - HDP2
+ ; 2 - HDP3
+ ; 3 - HDP4
+ ; 4 - HDP5
+ ; 5 - HDP6
+ Mapping CONN_CHANNEL_MAPPING (2) DUP ({}) ;< Set specific mapping of lanes to connector pins
+ ;Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane
+ ;Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only
+ ;applicable for Dual DDI link)
+ ;if Mapping[x] set to 0 than default mapping assumed
+ LanePnInversionMask UINT8 ? ; < Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port
+ ; 0 - Do not invert (default)
+ ; 1 - Invert P and N on this lane
+ Flags UINT8 ? ; < Capabilities flags
+ ; Flags bit[0] DDI_DATA_FLAGS_DP1_1_ONLY Selects downgrade PHY link to DP1.1
+ ; Flags bit[7:1] Reserved
+ ;
+PCIe_DDI_DATA ENDS
+
+
+; Engine Configuration
+PCIe_ENGINE_DATA STRUCT
+ EngineType UINT8 ? ; < Engine type
+ ; 0 - Ignore engine configuration
+ ; 1 - PCIe port
+ ; 2 - DDI
+ StartLane UINT16 ? ; < Start lane number (in reversed configuration StartLane > EndLane).
+ EndLane UINT16 ? ; < End lane number (in reversed configuration StartLane > EndLane).
+PCIe_ENGINE_DATA ENDS
+
+; PCIe port descriptor
+PCIe_PORT_DESCRIPTOR STRUCT
+ Flags UINT32 ? ; < Descriptor flags
+ ; Bit31 - last descriptor in complex
+ EngineData PCIe_ENGINE_DATA {} ; < Engine data
+ Port PCIe_PORT_DATA {} ; < PCIe port specific configuration info
+PCIe_PORT_DESCRIPTOR ENDS
+
+; DDI descriptor
+PCIe_DDI_DESCRIPTOR STRUCT
+ Flags UINT32 ? ; < Descriptor flags
+ EngineData PCIe_ENGINE_DATA {} ; < Engine data
+ Ddi PCIe_DDI_DATA {} ; < DDI port specific configuration info
+PCIe_DDI_DESCRIPTOR ENDS
+
+; Slot Reset Info
+PCIe_SLOT_RESET_INFO STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header
+ ResetId UINT8 ? ; < Slot reset ID as specified in PCIe_PORT_DESCRIPTOR
+ ResetControl UINT8 ? ; < Reset control as defined by PCIE_RESET_CONTROL
+PCIe_SLOT_RESET_INFO ENDS
+
+GFX_VBIOS_IMAGE_FLAG_SPECIAL_POST EQU 001h
+
+; VBIOS image info
+GFX_VBIOS_IMAGE_INFO STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard configuration header
+ ImagePtr POINTER ? ; < Pointer to VBIOS image
+ GfxPciAddress PCI_ADDR {} ; < PCI address of integrated graphics controller
+ Flags UINT32 ? ; < BIT[0] - special repost requred
+GFX_VBIOS_IMAGE_INFO ENDS
+
+; PCIe Complex descriptor
+PCIe_COMPLEX_DESCRIPTOR STRUCT
+ Flags UINT32 ? ; < Descriptor flags
+ ; Bit31 - last descriptor in topology
+ ;
+ ;
+ SocketId UINT32 ? ; < Socket Id
+ PciePortList POINTER ? ;< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST).
+ DdiLinkList POINTER ? ;< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST).
+ Reserved POINTER ? ;< Reserved for future use
+PCIe_COMPLEX_DESCRIPTOR ENDS
+
+ AssertSlotReset EQU 0
+ DeassertSlotReset EQU 1
+PCIE_RESET_CONTROL TEXTEQU <DWORD>
+
+ PcieUnusedEngine EQU 0
+ PciePortEngine EQU 1
+ PcieDdiEngine EQU 2
+ MaxPcieEngine EQU 3 ; < Not a valid value, used for verifying input
+PCIE_ENGINE_TYPE TEXTEQU <DWORD>
+
+ PcieGenMaxSupported EQU 0
+ PcieGen1 EQU 1
+ PcieGen2 EQU 2
+ PcieGen3 EQU 3
+ MaxPcieGen EQU 4 ; < Not a valid value, used for verifying input
+PCIE_LINK_SPEED_CAP TEXTEQU <DWORD>
+
+ PsppDisabled EQU 0
+ PsppPerformance EQU 1
+ PsppBalanceHigh EQU 2
+ PsppBalanceLow EQU 3
+ PsppPowerSaving EQU 4
+ MaxPspp EQU 5 ; < Not a valid value, used for verifying input
+PCIE_PSPP_POLICY TEXTEQU <DWORD>
+
+ ConnectorTypeDP EQU 0
+ ConnectorTypeEDP EQU 1
+ ConnectorTypeSingleLinkDVI EQU 2
+ ConnectorTypeDualLinkDVI EQU 3
+ ConnectorTypeHDMI EQU 4
+ ConnectorTypeDpToVga EQU 5
+ ConnectorTypeDpToLvds EQU 6
+ ConnectorTypeNutmegDpToVga EQU 7
+ ConnectorTypeSingleLinkDviI EQU 8
+ ConnectorTypeCrt EQU 9
+ ConnectorTypeLvds EQU 10
+ ConnectorTypeEDPToLvds EQU 11
+ ConnectorTypeEDPToLvdsSwInit EQU 12
+ ConnectorTypeAutoDetect EQU 13
+ MaxConnectorType EQU 14 ; < Not a valid value, used for verifying input
+PCIE_CONNECTOR_TYPE TEXTEQU <DWORD>
+
+ ChannelTypeLowLoss EQU 0
+ ChannelTypeHighLoss EQU 1
+ ChannelTypeMob0db EQU 2
+ ChannelTypeMob3db EQU 3
+ ChannelTypeExt6db EQU 4
+ ChannelTypeExt8db EQU 5
+ MaxChannelType EQU 6 ; < Not a valid value, used for verifying input
+PCIE_CHANNEL_TYPE TEXTEQU <DWORD>
+
+ AspmDisabled EQU 0
+ AspmL0s EQU 1
+ AspmL1 EQU 2
+ AspmL0sL1 EQU 3
+ MaxAspm EQU 4 ; < Not a valid value, used for verifying input
+PCIE_ASPM_TYPE TEXTEQU <DWORD>
+
+ HotplugDisabled EQU 0
+ HotplugBasic EQU 1
+ HotplugServer EQU 2
+ HotplugEnhanced EQU 3
+ HotplugInboard EQU 4
+ MaxHotplug EQU 5 ; < Not a valid value, used for verifying input
+PCIE_HOTPLUG_TYPE TEXTEQU <DWORD>
+
+ PortDisabled EQU 0
+ PortEnabled EQU 1
+PCIE_PORT_ENABLE TEXTEQU <DWORD>
+
+ PcieAcsDisabled EQU 0
+ PcieAcsEnabled EQU 1
+PCIE_ACS_CAP TEXTEQU <DWORD>
+
+ ClkPmSupportDisabled EQU 0
+ ClkPmSupportEnabled EQU 1
+CLKPM_SUPPORT_ENABLE TEXTEQU <DWORD>
+
+ Aux1 EQU 0
+ Aux2 EQU 1
+ Aux3 EQU 2
+ Aux4 EQU 3
+ Aux5 EQU 4
+ Aux6 EQU 5
+ MaxAux EQU 6 ; < Not a valid value, used for verifying input
+PCIE_AUX_TYPE TEXTEQU <DWORD>
+
+ Hdp1 EQU 0
+ Hdp2 EQU 1
+ Hdp3 EQU 2
+ Hdp4 EQU 3
+ Hdp5 EQU 4
+ Hdp6 EQU 5
+ MaxHdp EQU 6 ; < Not a valid value, used for verifying input
+PCIE_HDP_TYPE TEXTEQU <DWORD>
+
+;PCIe_DDI_DATA.Flags definitions
+DDI_DATA_FLAGS_DP1_1_ONLY EQU 01h ; < BIT[0] Selects downgrade PHY link to DP1.1
+EXT_DISPLAY_PATH_CAPS_DP_FIXED_VS_EN EQU 02h ; < BIT[1] VBIOS will always output fixed voltage swing during DP link training
+
+;DP receiver definitions with fixed voltage swing
+DP_VS_0_4V_0DB EQU 00h ; < 0x00
+DP_VS_0_6V_0DB EQU 01h ; < 0x01
+DP_VS_0_8V_0DB EQU 02h ; < 0x02
+DP_VS_1_2V_0DB EQU 03h ; < 0x03
+DP_VS_0_4V_3_5DB EQU 08h ; < 0x08
+DP_VS_0_6V_3_5DB EQU 09h ; < 0x09
+DP_VS_0_8V_3_5DB EQU 0Ah ; < 0x0a
+DP_VS_0_4V_6DB EQU 10h ; < 0x10
+DP_VS_0_6V_6DB EQU 11h ; < 0x11
+DP_VS_0_4V_9_5DB EQU 18h ; < 0x18
+DP_FIXED_VOLT_SWING_TYPE TEXTEQU <DWORD>
+
+;IOMMU requestor ID
+IOMMU_REQUESTOR_ID STRUCT
+ Bus UINT16 ? ; <[15:8] - Bus number, [7:3] - Device number, [2:0] - Function number
+IOMMU_REQUESTOR_ID ENDS
+
+;IVMD exclusion range descriptor
+IOMMU_EXCLUSION_RANGE_DESCRIPTOR STRUCT
+ Flags UINT32 ? ; Descriptor flags
+ ; @li @b Flags[31] - Terminate descriptor array.
+ ; @li @b Flags[30] - Ignore descriptor.
+ RequestorIdStart IOMMU_REQUESTOR_ID {} ; Requestor ID start
+ RequestorIdEnd IOMMU_REQUESTOR_ID {} ; Requestor ID end (use same as start for single ID)
+ RangeBaseAddress UINT64 ? ; Phisical base address of exclusion range
+ RangeLength UINT64 ? ; Length of exclusion range in bytes
+IOMMU_EXCLUSION_RANGE_DESCRIPTOR ENDS
+
+;----------------------------------------------------------------------------
+; GNB configuration info
+;----------------------------------------------------------------------------
+;
+
+; LVDS Misc Control Field
+LVDS_MISC_CONTROL_FIELD STRUCT
+ FpdiMode UINT8 ?
+ ;IN UINT8 FpdiMode:1;
+ ;IN UINT8 DlChSwap:1;
+ ;IN UINT8 VsyncActiveLow:1;
+ ;IN UINT8 HsyncActiveLow:1;
+ ;IN UINT8 BLONActiveLow:1;
+ ;IN UINT8 LvdsVolOverwriteEn:1;
+ ;IN UINT8 Reserved:2;
+LVDS_MISC_CONTROL_FIELD ENDS
+
+; LVDS Misc Control
+LVDS_MISC_CONTROL UNION
+ Field LVDS_MISC_CONTROL_FIELD {}
+ Value UINT8 ?
+LVDS_MISC_CONTROL ENDS
+
+; Display Misc Control Field
+DISPLAY_MISC_CONTROL_FIELD STRUCT
+ Reserved1 UINT8 ?
+ ;IN UINT8 Reserved1:3;
+ ;IN UINT8 VbiosFastBootEn:1;
+ ;IN UINT8 Reserved2:4;
+DISPLAY_MISC_CONTROL_FIELD ENDS
+
+; Display Misc Control
+DISPLAY_MISC_CONTROL UNION
+ Field DISPLAY_MISC_CONTROL_FIELD {}
+ Value UINT8 ?
+DISPLAY_MISC_CONTROL ENDS
+
+; Configuration settings for GNB.
+GNB_POST_CONFIGURATION STRUCT
+ IgpuEnableDisablePolicy UINT8 ? ; This item defines the iGPU Enable/Disable policy
+ ; @li 0 = Auto - use existing default -
+ ; @li 1 = Disable iGPU if any PCIe/PCI graphics card present
+GNB_POST_CONFIGURATION ENDS
+
+ IGPU_DISABLE_AUTO EQU 0 ; Auto setting - disable iGPU if ANY PCI graphics or non-AMD PCIe graphics
+ IGPU_DISABLE_ANY_PCIE EQU 1 ; Disable iGPU if any PCI or PCIE graphics card is present
+
+
+; Configuration settings for GNB.
+GNB_ENV_CONFIGURATION STRUCT
+ Gnb3dStereoPinIndex UINT8 ? ;< 3D Stereo Pin ID.
+ ; @li 0 = Stereo 3D is disabled (default).
+ ; @li 1 = Use processor pin HPD1.
+ ; @li 2 = Use processor pin HPD2
+ ; @li 3 = Use processor pin HPD3
+ ; @li 4 = Use processor pin HPD4
+ ; @li 5 = Use processor pin HPD5
+ ; @li 6 = Use processor pin HPD6
+ IommuSupport BOOLEAN ? ; IOMMU support.
+ ; TRUE = Disable and hide IOMMU device.
+ ; FLASE = Initialize IOMMU subsystem. Generate ACPI IVRS table.
+ LvdsSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 %
+ LvdsSpreadSpectrumRate UINT16 ? ; Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz
+ LvdsPowerOnSeqDigonToDe UINT8 ? ; This item configures panel initialization timing.
+ LvdsPowerOnSeqDeToVaryBl UINT8 ? ; This item configures panel initialization timing.
+ LvdsPowerOnSeqDeToDigon UINT8 ? ; This item configures panel initialization timing.
+ LvdsPowerOnSeqVaryBlToDe UINT8 ? ; This item configures panel initialization timing.
+ LvdsPowerOnSeqOnToOffDelay UINT8 ? ; This item configures panel initialization timing.
+ LvdsPowerOnSeqVaryBlToBlon UINT8 ? ; This item configures panel initialization timing.
+ LvdsPowerOnSeqBlonToVaryBl UINT8 ? ; This item configures panel initialization timing.
+ LvdsMaxPixelClockFreq UINT16 ? ; This item configures the maximum pixel clock frequency supported.
+ LcdBitDepthControlValue UINT32 ? ; This item configures the LCD bit depth control settings.
+ Lvds24bbpPanelMode UINT8 ? ; This item configures the LVDS 24 BBP mode.
+ LvdsMiscControl LVDS_MISC_CONTROL {} ; This item configures LVDS swap/Hsync/Vsync/BLON
+ PcieRefClkSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 %
+ GnbRemoteDisplaySupport BOOLEAN ? ; This item enables Wireless Display Support
+ LvdsMiscVoltAdjustment UINT8 ? ; Register LVDS_CTRL_4 to adjust LVDS output voltage
+ DisplayMiscControl DISPLAY_MISC_CONTROL {} ; This item configures display misc control
+ DpFixedVoltSwingType DP_FIXED_VOLT_SWING_TYPE ? ; To indicate fixed voltage swing value
+GNB_ENV_CONFIGURATION ENDS
+
+; Configuration settings for GNB.
+GNB_MID_CONFIGURATION STRUCT
+ iGpuVgaMode UINT8 ? ; < VGA resources decoding configuration for iGPU
+ ; < @li 0 = iGPU decode all VGA resources (must be promary VGA adapter)
+ ; < @li 1 = iGPU will not decode any VGA resources (must be secondary graphics adapter)
+ PcieAcsCapability UINT8 ? ; < Pcie ACS Capability support
+ ; < @li 0 = Disabled
+ ; < @li 1 = Enabled
+ GnbIoapicAddress UINT64 ? ; < GNB IOAPIC Base Address(NULL if platform configured)
+GNB_MID_CONFIGURATION ENDS
+
+; GNB configuration info
+GNB_CONFIGURATION STRUCT
+ PcieComplexList POINTER ? ; Pointer to array of PCIe_COMPLEX_DESCRIPTOR structures describe PCIe topology on each processor package or NULL.
+ ; Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST
+ ;
+ ;
+ ;
+ ; Topology organization definition assume PCIe_COMPLEX_DESCRIPTOR defined first following
+ ; PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR for given PCIe_COMPLEX_DESCRIPTOR
+ ; defined in arbitrary sequence:
+ ; Example of topology definition for single socket system:
+ ; platformTopology LABEL DWORD
+ ;
+ ; Port0_2 PCIe_PORT_DESCRIPTOR <>;
+ ; Port0_3 PCIe_PORT_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST> ;
+ ; ...
+ ; Ddi0_A PCIe_DDI_DESCRIPTOR <>;
+ ; Ddi0_B PCIe_DDI_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST,>;
+ ; ...
+ ; Cpu0 PCIe_COMPLEX_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST, 0, Port0_2, Ddi0_A>
+ ;
+ ;
+ PsppPolicy UINT8 ? ;< PSPP (PCIe Speed Power Policy)
+ ; @li @b 0 - Disabled
+ ; @li @b 1 - Performance
+ ; @li @b 2 - Balance-High
+ ; @li @b 3 - Balance-Low
+ ; @li @b 4 - Power Saving
+ ;
+GNB_CONFIGURATION ENDS
+
+GNB_LATE_CONFIGURATION STRUCT ;
+ DockedTdpHeadroom BOOLEAN ? ; This item enables docked Tdp headroom.
+GNB_LATE_CONFIGURATION ENDS ;
+
+; ---------------------------------------------------------------------------
+
+; MEMORY-SPECIFIC DATA STRUCTURES
+
+; ---------------------------------------------------------------------------
+
+
+ ; AGESA MAXIMIUM VALUES
+
+ ; These Max values are used to define array sizes and associated loop
+ ; counts in the code. They reflect the maximum values that AGESA
+ ; currently supports and does not necessarily reflect the hardware
+ ; capabilities of configuration.
+
+
+ MAX_SOCKETS_SUPPORTED EQU 8 ; < Max number of sockets in system
+ MAX_CHANNELS_PER_SOCKET EQU 4 ; < Max Channels per sockets
+ MAX_DIMMS_PER_CHANNEL EQU 4 ; < Max DIMMs on a memory channel (independent of platform)
+ NUMBER_OF_DELAY_TABLES EQU 9 ; < Number of tables defined in CH_DEF_STRUCT.
+ ; < Eg: UINT16 *RcvEnDlys;
+ ; < UINT8 *WrDqsDlys;
+ ; < UINT8 *RdDqsDlys;
+ ; < UINT8 *WrDatDlys;
+ ; < UINT8 *RdDqsMinDlys;
+ ; < UINT8 *RdDqsMaxDlys;
+ ; < UINT8 *WrDatMinDlys;
+ ; < UINT8 *WrDatMaxDlys;
+ NUMBER_OF_FAILURE_MASK_TABLES EQU 1 ; < Number of failure mask tables
+ MAX_PLATFORM_TYPES EQU 16 ; < Platform types per system
+ DATAEYE_VREF_RANGE EQU 31 ; < Number of VREF steps in Data Eye Bitmap
+ MCT_TRNG_KEEPOUT_START EQU 00004000h ; < base [39:8]
+ MCT_TRNG_KEEPOUT_END EQU 00007FFFh ; < base [39:8]
+
+ UMA_ATTRIBUTE_INTERLEAVE EQU 80000000h ; < Uma Region is interleaved
+ UMA_ATTRIBUTE_ON_DCT0 EQU 40000000h ; < UMA resides on memory that belongs to DCT0
+ UMA_ATTRIBUTE_ON_DCT1 EQU 20000000h ; < UMA resides on memory that belongs to DCT1
+ UMA_ATTRIBUTE_ON_DCT2 EQU 10000000h ; < UMA resides on memory that belongs to DCT2
+ UMA_ATTRIBUTE_ON_DCT3 EQU 08000000h ; < UMA resides on memory that belongs to DCT3
+
+ PSO_TABLE TEXTEQU <UINT8>; < Platform Configuration Table
+
+ ; AGESA DEFINITIONS
+
+ ; Many of these are derived from the platform and hardware specific definitions
+
+ ; EccSymbolSize override value
+ ECCSYMBOLSIZE_USE_BKDG EQU 0 ; < Use BKDG Recommended Value
+ ECCSYMBOLSIZE_FORCE_X4 EQU 4 ; < Force to x4
+ ECCSYMBOLSIZE_FORCE_X8 EQU 8 ; < Force to x8
+ ; CPU Package Type
+ PT_L1 EQU 0 ; < L1 Package type
+ PT_M2 EQU 1 ; < AM Package type
+ PT_S1 EQU 2 ; < S1 Package type
+
+ ; Structures use to pass system Logical CPU-ID
+CPU_LOGICAL_ID STRUCT
+ Family UINT64 ? ; < Indicates logical ID Family
+ Revision UINT64 ? ; < Indicates logical ID Family
+CPU_LOGICAL_ID ENDS
+
+ ; Structures use to report AMP status
+AMP_STATUS STRUCT
+ AmpVoltageValid BOOLEAN ? ; < Indicates if Amp voltage is valid
+ AmpSupportDetectedButNotEnabled BOOLEAN ? ; < Indicates if Amp support is detected but not enabled
+ AmpSelectedButNotEnabled BOOLEAN ? ; < Indicates if Amp is selected but not enabled
+AMP_STATUS ENDS
+
+ ; Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE
+
+ AMD_PLATFORM_SERVER EQU 8000h ; < Server
+ AMD_PLATFORM_DESKTOP EQU 10000h ; < Desktop
+ AMD_PLATFORM_MOBILE EQU 20000h ; < Mobile
+AMD_PLATFORM_TYPE TEXTEQU <DWORD>
+
+ ; Dram technology type
+
+ DDR2_TECHNOLOGY EQU 0 ; < DDR2 technology
+ DDR3_TECHNOLOGY EQU 1 ; < DDR3 technology
+ GDDR5_TECHNOLOGY EQU 2 ; < GDDR5 technology
+ UNSUPPORTED_TECHNOLOGY EQU 3 ; < Unsupported technology
+TECHNOLOGY_TYPE TEXTEQU <DWORD>
+
+ ; Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT
+
+ DDR400_FREQUENCY EQU 200 ; < DDR 400
+ DDR533_FREQUENCY EQU 266 ; < DDR 533
+ DDR667_FREQUENCY EQU 333 ; < DDR 667
+ DDR800_FREQUENCY EQU 400 ; < DDR 800
+ DDR1066_FREQUENCY EQU 533 ; < DDR 1066
+ DDR1333_FREQUENCY EQU 667 ; < DDR 1333
+ DDR1600_FREQUENCY EQU 800 ; < DDR 1600
+ DDR1866_FREQUENCY EQU 933 ; < DDR 1866
+ DDR2100_FREQUENCY EQU 1050 ; < DDR 2100
+ DDR2133_FREQUENCY EQU 1066 ; < DDR 2133
+ DDR2400_FREQUENCY EQU 1200 ; < DDR 2400
+ UNSUPPORTED_DDR_FREQUENCY EQU 1201 ; < Highest limit of DDR frequency
+
+ ; Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE
+
+ QUADRANK_REGISTERED EQU 0
+ QUADRANK_UNBUFFERED EQU 1
+
+ ; Build Configuration values for BLDCFG_TIMING_MODE_SELECT
+
+ TIMING_MODE_AUTO EQU 0 ; < Use best rate possible
+ TIMING_MODE_LIMITED EQU 1 ; < Set user top limit
+ TIMING_MODE_SPECIFIC EQU 2 ; < Set user specified speed
+
+ ; Build Configuration values for BLDCFG_POWER_DOWN_MODE
+
+ POWER_DOWN_BY_CHANNEL EQU 0
+ POWER_DOWN_BY_CHIP_SELECT EQU 1
+ POWER_DOWN_MODE_AUTO EQU 2
+
+ ; Low voltage support
+
+ VOLT_INITIAL EQU 0 ; < Initial value for VDDIO
+ VOLT1_5 EQU 1 ; < 1.5 Volt
+ VOLT1_35 EQU 2 ; < 1.35 Volt
+ VOLT1_25 EQU 3 ; < 1.25 Volt
+ VOLT_UNSUPPORTED EQU 0FFh ; < No common voltage found
+DIMM_VOLTAGE TEXTEQU <DWORD>
+
+ ; AMP voltage support
+
+ AMP_VOLT_RSVD EQU 0 ;< Reserved
+ AMP_VOLT1_5 EQU 1 ;< 1.5 Volt
+ AMP_VOLT1_55 EQU 2 ;< 1.55 Volt
+ AMP_VOLT1_6 EQU 3 ;< 1.6 Volt
+ AMP_VOLT1_65 EQU 4 ;< 1.65 Volt
+ AMP_VOLT1_7 EQU 5 ;< 1.7 Volt
+ AMP_VOLT1_75 EQU 6 ;< 1.75 Volt
+ AMP_VOLT1_8 EQU 7 ;< 1.8 Volt
+ AMP_VOLT1_85 EQU 8 ;< 1.85 Volt
+ AMP_VOLT1_9 EQU 9 ;< 1.9 Volt
+ AMP_VOLT1_45 EQU 10h ;< 1.45 Volt
+ AMP_VOLT1_4 EQU 20h ;< 1.4 Volt
+ AMP_VOLT1_35 EQU 30h ;< 1.35 Volt
+ AMP_VOLT1_3 EQU 40h ;< 1.3 Volt
+ AMP_VOLT1_25 EQU 50h ;< 1.25 Volt
+ AMP_VOLT1_2 EQU 60h ;< 1.2 Volt
+AMP_DIMM_VOLTAGE TEXTEQU <DWORD>
+
+ ; UMA Mode
+
+ UMA_NONE EQU 0 ; < UMA None
+ UMA_SPECIFIED EQU 1 ; < UMA Specified
+ UMA_AUTO EQU 2 ; < UMA Auto
+UMA_MODE TEXTEQU <DWORD>
+
+ ; Force Training Mode
+
+ FORCE_TRAIN_1D EQU 0 ; < 1D Training only
+ FORCE_TRAIN_2D EQU 1 ; < 2D Training only
+ FORCE_TRAIN_AUTO EQU 2 ; < Auto - 1D or 2D depending on configuration
+FORCE_TRAIN_MODE TEXTEQU <DWORD>
+
+; The possible DRAM prefetch mode settings.
+ DRAM_PREFETCHER_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled.
+ DISABLE_DRAM_PREFETCH_FOR_IO EQU 1 ; Disable DRAM prefetching for I/O requests only.
+ DISABLE_DRAM_PREFETCH_FOR_CPU EQU 2 ; Disable DRAM prefetching for requests from processor cores only.
+ DISABLE_DRAM_PREFETCHER EQU 3 ; Disable DRAM prefetching.
+ MAX_DRAM_FREFETCH_MODE EQU 4 ; Not a DRAM prefetch mode, use for limit checking.
+DRAM_PREFETCH_MODE TEXTEQU <DWORD>
+
+ ; Build Configuration values for BLDCFG_UMA_ALIGNMENT
+
+ NO_UMA_ALIGNED EQU 00FFFFFFh
+ UMA_4MB_ALIGNED EQU 00FFFFC0h
+ UMA_128MB_ALIGNED EQU 00FFF800h
+ UMA_256MB_ALIGNED EQU 00FFF000h
+ UMA_512MB_ALIGNED EQU 00FFE000h
+UMA_ALIGNMENT TEXTEQU <DWORD>
+ ; ===============================================================================
+ ; Global MCT Configuration Status Word (GStatus)
+ ; ===============================================================================
+
+ GsbMTRRshort EQU 0 ; < Ran out of MTRRs while mapping memory
+ GsbAllECCDimms EQU 1 ; < All banks of all Nodes are ECC capable
+ GsbDramECCDis EQU 2 ; < Dram ECC requested but not enabled.
+ GsbSoftHole EQU 3 ; < A Node Base gap was created
+ GsbHWHole EQU 4 ; < A HW dram remap was created
+ GsbNodeIntlv EQU 5 ; < Node Memory interleaving was enabled
+ GsbSpIntRemapHole EQU 6 ; < Special condition for Node Interleave and HW remapping
+ GsbEnDIMMSpareNW EQU 7 ; < Indicates that DIMM Spare can be used without a warm reset
+
+ GsbEOL EQU 8 ; < End of list
+GLOBAL_STATUS_FIELD TEXTEQU <DWORD>
+
+; ===============================================================================
+ ; Local Error Status (DIE_STRUCT.ErrStatus[31:0])
+; ===============================================================================
+
+ EsbNoDimms EQU 0 ; < No DIMMs
+ EsbSpdChkSum EQU 1 ; < SPD Checksum fail
+ EsbDimmMismatchM EQU 2 ; < dimm module type(buffer) mismatch
+ EsbDimmMismatchT EQU 3 ; < dimm CL/T mismatch
+ EsbDimmMismatchO EQU 4 ; < dimm organization mismatch (128-bit)
+ EsbNoTrcTrfc EQU 5 ; < SPD missing Trc or Trfc info
+ EsbNoCycTime EQU 6 ; < SPD missing byte 23 or 25
+ EsbBkIntDis EQU 7 ; < Bank interleave requested but not enabled
+ EsbDramECCDis EQU 8 ; < Dram ECC requested but not enabled
+ EsbSpareDis EQU 9 ; < Online spare requested but not enabled
+ EsbMinimumMode EQU 10 ; < Running in Minimum Mode
+ EsbNoRcvrEn EQU 11 ; < No DQS Receiver Enable pass window found
+ EsbSmallRcvr EQU 12 ; < DQS Rcvr En pass window too small (far right of dynamic range)
+ EsbNoDqsPos EQU 13 ; < No DQS-DQ passing positions
+ EsbSmallDqs EQU 14 ; < DQS-DQ passing window too small
+ EsbDCBKScrubDis EQU 15 ; < DCache scrub requested but not enabled
+
+ EsbEMPNotSupported EQU 16 ; < Processor is not capable for EMP.
+ EsbEMPConflict EQU 17 ; < EMP requested but cannot be enabled since
+ ; < channel interleaving, bank interleaving, or bank swizzle is enabled.
+ EsbEMPDis EQU 18 ; < EMP requested but cannot be enabled since
+ ; < memory size of each DCT is not a power of two.
+
+ EsbEOL EQU 19 ; < End of list
+ERROR_STATUS_FIELD TEXTEQU <DWORD>
+
+; ===============================================================================
+ ; Local Configuration Status (DIE_STRUCT.Status[31:0])
+; ===============================================================================
+
+ SbRegistered EQU 0 ; < All DIMMs are Registered
+ SbEccDimms EQU 1 ; < All banks ECC capable
+ SbParDimms EQU 2 ; < All banks Addr/CMD Parity capable
+ SbDiagClks EQU 3 ; < Jedec ALL slots clock enable diag mode
+ Sb128bitmode EQU 4 ; < DCT in 128-bit mode operation
+ Sb64MuxedMode EQU 5 ; < DCT in 64-bit mux'ed mode.
+ Sb2TMode EQU 6 ; < 2T CMD timing mode is enabled.
+ SbSWNodeHole EQU 7 ; < Remapping of Node Base on this Node to create a gap.
+ SbHWHole EQU 8 ; < Memory Hole created on this Node using HW remapping.
+ SbOver400Mhz EQU 9 ; < DCT freq greater than or equal to 400MHz flag
+ SbDQSPosPass2 EQU 10 ; < Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz
+ SbDQSRcvLimit EQU 11 ; < Used for DQSRcvEnTrain to know we have reached the upper bound.
+ SbExtConfig EQU 12 ; < Indicate the default setting for extended PCI configuration support
+ SbLrdimms EQU 13 ; < All DIMMs are LRDIMMs
+ SbEOL EQU 14 ; < End of list
+LOCAL_STATUS_FIELD TEXTEQU <DWORD>
+
+
+; < CPU MSR Register definitions ------------------------------------------
+ SYS_CFG EQU 0C0010010h
+ TOP_MEM EQU 0C001001Ah
+ TOP_MEM2 EQU 0C001001Dh
+ HWCR EQU 0C0010015h
+ NB_CFG EQU 0C001001Fh
+
+ FS_BASE EQU 0C0000100h
+ IORR0_BASE EQU 0C0010016h
+ IORR0_MASK EQU 0C0010017h
+ BU_CFG EQU 0C0011023h
+ BU_CFG2 EQU 0C001102Ah
+ COFVID_STAT EQU 0C0010071h
+ TSC EQU 10h
+
+; ===============================================================================
+ ; SPD Data for each DIMM
+; ===============================================================================
+SPD_DEF_STRUCT STRUCT
+ DimmPresent BOOLEAN ? ; < Indicates that the DIMM is present and Data is valid
+ Data UINT8 (256) DUP (?) ; < Buffer for 256 Bytes of SPD data from DIMM
+SPD_DEF_STRUCT ENDS
+
+; ===============================================================================
+ ; Channel Definition Structure
+ ; This data structure defines entries that are specific to the channel initialization
+; ===============================================================================
+CH_DEF_STRUCT STRUCT
+ ChannelID UINT8 ? ; < Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D)
+ TechType TECHNOLOGY_TYPE ? ; < Technology type of this channel
+ ChDimmPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is present.
+ ; < DIMM# Select Signal
+ ; < 0 MA0_CS_L[0, 1]
+ ; < 1 MB0_CS_L[0, 1]
+ ; < 2 MA1_CS_L[0, 1]
+ ; < 3 MB1_CS_L[0, 1]
+ ; < 4 MA2_CS_L[0, 1]
+ ; < 5 MB2_CS_L[0, 1]
+ ; < 6 MA3_CS_L[0, 1]
+ ; < 7 MB3_CS_L[0, 1]
+
+ DCTPtr POINTER ? ; < Pointer to the DCT data of this channel.
+ MCTPtr POINTER ? ; < Pointer to the node data of this channel.
+ SpdPtr POINTER ? ; < Pointer to the SPD data for this channel. (Setup by NB Constructor)
+ DimmSpdPtr POINTER (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of pointers to
+ ; < SPD Data for each Dimm. (Setup by Tech Block Constructor)
+ ChDimmValid UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved.
+ RegDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved.
+ LrDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved.
+ SODimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a SO-DIMM where 4..7 are reserved.
+ Loads UINT8 ? ; < Number of devices loading bus
+ Dimms UINT8 ? ; < Number of DIMMs loading Channel
+ Ranks UINT8 ? ; < Number of ranks loading Channel DATA
+ SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode)
+ ; < FALSE = 1T
+ ; < TRUE = 2T
+ ; < The following pointers will be pointed to dynamically allocated buffers.
+ ; < Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below.
+ ; < Example: If DIMM and Byte based training, then
+ ; < XX is a value in Hex
+ ; < BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE
+ ; < Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX
+ ; < Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX
+ RcvEnDlys POINTER ? ; < DQS Receiver Enable Delays
+ WrDqsDlys POINTER ? ; < Write DQS delays (only valid for DDR3)
+ RdDqsDlys POINTER ? ; < Read Dqs delays
+ WrDatDlys POINTER ? ; < Write Data delays
+ RdDqs2dDlys POINTER ? ; < 2d Read DQS data
+ RdDqsMinDlys POINTER ? ; < Minimum Window for Read DQS
+ RdDqsMaxDlys POINTER ? ; < Maximum Window for Read DQS
+ WrDatMinDlys POINTER ? ; < Minimum Window for Write data
+ WrDatMaxDlys POINTER ? ; < Maximum Window for Write data
+ RcvEnDlysMemPs1 POINTER ? ; < DQS Receiver Enable Delays for Memory Pstate 1
+ WrDqsDlysMemPs1 POINTER ? ; < Write DQS delays for Memory Pstate 1 (only valid for DDR3)
+ RdDqsDlysMemPs1 POINTER ? ; < Read Dqs delays for Memory Pstate 1
+ WrDatDlysMemPs1 POINTER ? ; < Write Data delays for Memory Pstate 1
+ RdDqs2dDlysMemPs1 POINTER ? ; < 2d Read DQS data for Memory Pstate 1
+ RdDqsMinDlysMemPs1 POINTER ? ; < Minimum Window for Read DQS for Memory Pstate 1
+ RdDqsMaxDlysMemPs1 POINTER ? ; < Maximum Window for Read DQS for Memory Pstate 1
+ WrDatMinDlysMemPs1 POINTER ? ; < Minimum Window for Write data for Memory Pstate 1
+ WrDatMaxDlysMemPs1 POINTER ? ; < Maximum Window for Write data for Memory Pstate 1
+ RowCount UINT8 ? ; < Number of rows of the allocated buffer.
+ ColumnCount UINT8 ? ; < Number of columns of the allocated buffer.
+
+ FailingBitMask POINTER ? ; < Table of masks to Track Failing bits
+ FailingBitMaskMemPs1 POINTER ? ; < Table of masks to Track Failing bits for Memory Pstate 1
+ RdDataEyes POINTER ? ; < Pointer to Read Data Eye Bitmaps
+ WrDataEyes POINTER ? ; < Pointer to Write Data Eye Bitmaps
+ DctOdcCtl UINT32 ? ; < Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h)
+ DctAddrTmg UINT32 ? ; < Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h)
+ PhyRODTCSLow UINT32 ? ; < Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h)
+ PhyRODTCSHigh UINT32 ? ; < Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h)
+ PhyWODTCSLow UINT32 ? ; < Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h)
+ PhyWODTCSHigh UINT32 ? ; < Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183)
+ PhyWLODT UINT8 (4) DUP (?) ; < Write Levelization ODT Pattern for Dimm 0-3 or CS 0-7(see BKDG FN2:Offset 9Ch, index 0x8[11:8])
+ DctEccDqsLike UINT16 ? ; < DCT DQS ECC UINT8 like...
+ DctEccDqsScale UINT8 ? ; < DCT DQS ECC UINT8 scale
+ PtrPatternBufA UINT16 ? ; < Ptr on stack to aligned DQS testing pattern
+ PtrPatternBufB UINT16 ? ; < Ptr on stack to aligned DQS testing pattern
+ ByteLane UINT8 ? ; < Current UINT8 Lane (0..7)
+ Direction UINT8 ? ; < Current DQS-DQ training write direction (0=read, 1=write)
+ Pattern UINT8 ? ; < Current pattern
+ DqsDelay UINT8 ? ; < Current DQS delay value
+ HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space.
+ HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space.
+ DctMaxRdLat UINT16 (4) DUP (?) ; < Max Read Latency (ns) for the DCT
+ ; < DctMaxRdLat [i] is for NBPstate i DIMMValidCh UINT8 ? ; < DIMM# in CH
+ DIMMValidCh UINT8 ? ; < DIMM# in CH
+ MaxCh UINT8 ? ; < Max number of CH in system
+ Dct UINT8 ? ; < Dct pointer
+ WrDatGrossH UINT8 ? ; < Write Data Gross delay high value
+ DqsRcvEnGrossL UINT8 ? ; < DQS Receive Enable Gross Delay low
+
+ TrwtWB UINT8 ? ; < Non-SPD timing value for TrwtWB
+ CurrRcvrDctADelay UINT8 ? ; < for keep current RcvrEnDly
+ T1000 UINT16 ? ; < get the T1000 figure (cycle time (ns) * 1K)
+ DqsRcvEnPass UINT8 ? ; < for TrainRcvrEn UINT8 lane pass flag
+ DqsRcvEnSaved UINT8 ? ; < for TrainRcvrEn UINT8 lane saved flag
+ SeedPass1Remainder UINT8 ? ; < for Phy assisted DQS receiver enable training
+
+ ClToNbFlag UINT8 ? ; < is used to restore ClLinesToNbDis bit after memory
+ NodeSysBase UINT32 ? ; < for channel interleave usage
+ RefRawCard UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of rawcards detected
+ CtrlWrd02 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 2 values per DIMM
+ CtrlWrd03 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 3 values per DIMM
+ CtrlWrd04 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 4 values per DIMM
+ CtrlWrd05 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 5 values per DIMM
+ CtrlWrd08 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 8 values per DIMM
+
+ CsPresentDCT UINT16 ? ; < For each bit n 0..7, 1 = Chip-select n is present
+ DimmMirrorPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is OnDimmMirror capable
+ DimmSpdCse UINT8 ? ; < For each bit n 0..7, 1 = DIMM n SPD checksum error
+ DimmExclude UINT8 ? ; < For each bit n 0..7, 1 = DIMM n gets excluded
+ DimmYr06 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's year code <= 2006
+ DimmWk2406 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June)
+ DimmPlPresent UINT8 ? ; < Bitmap indicating that Planar (1) or Stacked (0) Dimms are present.
+ DimmQrPresent UINT8 ? ; < QuadRank DIMM present?
+ DimmDrPresent UINT8 ? ; < Bitmap indicating that Dual Rank Dimms are present
+ DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present
+ Dimmx4Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved.
+ Dimmx8Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved.
+ Dimmx16Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved.
+ LrdimmPhysicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of Physical Ranks for LRDIMMs
+ LrDimmLogicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of LRDIMM Logical ranks in this configuration
+ LrDimmRankMult UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Rank Multipication factor per dimm.
+ DimmNibbleAccess UINT8 ? ; < For each bit n 0..3, 1 = DIMM n will use nibble signaling. Where 4..7 are reserved.
+ MemClkDisMap POINTER ? ; < This pointer will be set to point to an array that describes
+ ; < the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will
+ ; < base on this array to disable unused MemClk to save power.
+ ; <
+ ; < The array must have 8 entries. Each entry, which associates with
+ ; < one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to.
+ ; < Example:
+ ; < BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package
+ ; < is like below:
+ ; < Bit AM3/S1g3 pin name
+ ; < 0 M[B,A]_CLK_H/L[0]
+ ; < 1 M[B,A]_CLK_H/L[1]
+ ; < 2 M[B,A]_CLK_H/L[2]
+ ; < 3 M[B,A]_CLK_H/L[3]
+ ; < 4 M[B,A]_CLK_H/L[4]
+ ; < 5 M[B,A]_CLK_H/L[5]
+ ; < 6 M[B,A]_CLK_H/L[6]
+ ; < 7 M[B,A]_CLK_H/L[7]
+ ; < And platform has the following routing:
+ ; < CS0 M[B,A]_CLK_H/L[4]
+ ; < CS1 M[B,A]_CLK_H/L[2]
+ ; < CS2 M[B,A]_CLK_H/L[3]
+ ; < CS3 M[B,A]_CLK_H/L[5]
+ ; < Then MemClkDisMap should be pointed to the following array:
+ ; < CLK_2 CLK_3 CLK_4 CLK_5
+ ; < 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00
+ ; < Each entry of the array is the bitmask of 8 chip selects.
+
+ CKETriMap POINTER ? ; < This pointer will be set to point to an array that describes
+ ; < the routing of CKE pins to the DIMMs' ranks.
+ ; < The array must have 2 entries. Each entry, which associates with
+ ; < one CKE pin, is a bitmap of 8 CS that that CKE is routed to.
+ ; < AGESA will base on this array to disable unused CKE pins to save power.
+
+ ODTTriMap POINTER ? ; < This pointer will be set to point to an array that describes
+ ; < the routing of ODT pins to the DIMMs' ranks.
+ ; < The array must have 4 entries. Each entry, which associates with
+ ; < one ODT pin, is a bitmap of 8 CS that that ODT is routed to.
+ ; < AGESA will base on this array to disable unused ODT pins to save power.
+
+ ChipSelTriMap POINTER ? ; < This pointer will be set to point to an array that describes
+ ; < the routing of chip select pins to the DIMMs' ranks.
+ ; < The array must have 8 entries. Each entry is a bitmap of 8 CS.
+ ; < AGESA will base on this array to disable unused Chip select pins to save power.
+
+ ExtendTmp BOOLEAN ? ; < If extended temperature is supported on all dimms on a channel.
+
+ MaxVref UINT8 ? ; < Maximum Vref Value for channel
+
+ Reserved UINT8 (100) DUP (?) ; < Reserved
+CH_DEF_STRUCT ENDS
+
+; ===============================================================================
+ ; DCT Channel Timing Parameters
+ ; This data structure sets timings that are specific to the channel
+; ===============================================================================
+CH_TIMING_STRUCT STRUCT
+ DctDimmValid UINT16 ? ; < For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved.
+ DimmMirrorPresent UINT16 ? ; < For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved.
+ DimmSpdCse UINT16 ? ; < For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved.
+ DimmExclude UINT16 ? ; < For each bit n 0..3, 1 = DIMM n gets excluded because of no common voltage is found
+ CsPresent UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present
+ CsEnabled UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is enabled
+ CsTestFail UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present but disabled
+ CsTrainFail UINT16 ? ; < Bitmap showing which chipselects failed training
+ DIMM1KPage UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved.
+ DimmQrPresent UINT16 ? ; < QuadRank DIMM present?
+ DimmDrPresent UINT16 ? ; < Bitmap indicating that Dual Rank Dimms are present
+ DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present
+ Dimmx4Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved.
+ Dimmx8Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved.
+ Dimmx16Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved.
+
+ DIMMTrcd UINT16 ? ; < Minimax Trcd*40 (ns) of DIMMs
+ DIMMTrp UINT16 ? ; < Minimax Trp*40 (ns) of DIMMs
+ DIMMTrtp UINT16 ? ; < Minimax Trtp*40 (ns) of DIMMs
+ DIMMTras UINT16 ? ; < Minimax Tras*40 (ns) of DIMMs
+ DIMMTrc UINT16 ? ; < Minimax Trc*40 (ns) of DIMMs
+ DIMMTwr UINT16 ? ; < Minimax Twr*40 (ns) of DIMMs
+ DIMMTrrd UINT16 ? ; < Minimax Trrd*40 (ns) of DIMMs
+ DIMMTwtr UINT16 ? ; < Minimax Twtr*40 (ns) of DIMMs
+ DIMMTfaw UINT16 ? ; < Minimax Tfaw*40 (ns) of DIMMs
+ TargetSpeed UINT16 ? ; < Target DRAM bus speed in MHz
+ Speed UINT16 ? ; < DRAM bus speed in MHz
+ ; < 400 (MHz)
+ ; < 533 (MHz)
+ ; < 667 (MHz)
+ ; < 800 (MHz)
+ ; < and so on...
+ CasL UINT8 ? ; < CAS latency DCT setting (busclocks)
+ Trcd UINT8 ? ; < DCT Trcd (busclocks)
+ Trp UINT8 ? ; < DCT Trp (busclocks)
+ Trtp UINT8 ? ; < DCT Trtp (busclocks)
+ Tras UINT8 ? ; < DCT Tras (busclocks)
+ Trc UINT8 ? ; < DCT Trc (busclocks)
+ Twr UINT8 ? ; < DCT Twr (busclocks)
+ Trrd UINT8 ? ; < DCT Trrd (busclocks)
+ Twtr UINT8 ? ; < DCT Twtr (busclocks)
+ Tfaw UINT8 ? ; < DCT Tfaw (busclocks)
+ Trfc0 UINT8 ? ; < DCT Logical DIMM0 Trfc
+ ; < 0 = 75ns (for 256Mb devs)
+ ; < 1 = 105ns (for 512Mb devs)
+ ; < 2 = 127.5ns (for 1Gb devs)
+ ; < 3 = 195ns (for 2Gb devs)
+ ; < 4 = 327.5ns (for 4Gb devs)
+ Trfc1 UINT8 ? ; < DCT Logical DIMM1 Trfc (see Trfc0 for format)
+ Trfc2 UINT8 ? ; < DCT Logical DIMM2 Trfc (see Trfc0 for format)
+ Trfc3 UINT8 ? ; < DCT Logical DIMM3 Trfc (see Trfc0 for format)
+ DctMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by this DCT.
+ SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode)
+ ; < FALSE = 1T
+ ; < TRUE = 2T
+ TrwtTO UINT8 ? ; < DCT TrwtTO (busclocks)
+ Twrrd UINT8 ? ; < DCT Twrrd (busclocks)
+ Twrwr UINT8 ? ; < DCT Twrwr (busclocks)
+ Trdrd UINT8 ? ; < DCT Trdrd (busclocks)
+ TrwtWB UINT8 ? ; < DCT TrwtWB (busclocks)
+ TrdrdSD UINT8 ? ; < DCT TrdrdSD (busclocks)
+ TwrwrSD UINT8 ? ; < DCT TwrwrSD (busclocks)
+ TwrrdSD UINT8 ? ; < DCT TwrrdSD (busclocks)
+ MaxRdLat UINT16 ? ; < Max Read Latency
+ WrDatGrossH UINT8 ? ; < Temporary variables must be removed
+ DqsRcvEnGrossL UINT8 ? ; < Temporary variables must be removed
+CH_TIMING_STRUCT ENDS
+
+; ===============================================================================
+ ; Data for each DCT
+ ; This data structure defines data used to configure each DRAM controller
+; ===============================================================================
+DCT_STRUCT STRUCT
+ Dct UINT8 ? ; < Current Dct
+ Timings CH_TIMING_STRUCT {} ; < Channel Timing structure
+ TimingsMemPs1 POINTER ? ; < Pointed to channel timing structure for Memory Pstate 1
+ ChData POINTER ? ; < Pointed to a dynamically allocated array of Channel structures
+ ChannelCount UINT8 ? ; < Number of channel per this DCT
+ BkIntDis BOOLEAN ? ; < Bank interleave requested but not enabled on current DCT
+ BankAddrMap UINT8 ? ; < Bank Address Mapping
+ EnabledChipSels UINT8 ? ; < Number of enabled chip selects on current DCT
+DCT_STRUCT ENDS
+
+
+; ===============================================================================
+ ; Data Structure defining each Die
+ ; This data structure contains information that is used to configure each Die
+; ===============================================================================
+DIE_STRUCT STRUCT
+
+ ; Advanced:
+
+ NodeId UINT8 ? ; < Node ID of current controller
+ SocketId UINT8 ? ; < Socket ID of this Die
+ DieId UINT8 ? ; < ID of this die relative to the socket
+ PciAddr PCI_ADDR {} ; < Pci bus and device number of this controller.
+ ErrCode AGESA_STATUS ? ; < Current error condition of Node
+ ; < 0x0 = AGESA_SUCCESS
+ ; < 0x1 = AGESA_UNSUPPORTED
+ ; < 0x2 = AGESA_BOUNDS_CHK
+ ; < 0x3 = AGESA_ALERT
+ ; < 0x4 = AGESA_WARNING
+ ; < 0x5 = AGESA_ERROR
+ ; < 0x6 = AGESA_CRITICAL
+ ; < 0x7 = AGESA_FATAL
+ ; <
+ ErrStatus BOOLEAN (EsbEOL) DUP (?) ; < Error Status bit Field
+ Status BOOLEAN (SbEOL) DUP (?) ; < Status bit Field
+ NodeMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node.
+ NodeSysBase UINT32 ? ; < Base[47:16] (system address) DRAM base address of this Node.
+ NodeHoleBase UINT32 ? ; < If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node
+ NodeSysLimit UINT32 ? ; < Base[47:16] (system address) DRAM limit address of this Node.
+ DimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is present.
+ ; < DIMM# Select Signal
+ ; < 0 MA0_CS_L[0, 1]
+ ; < 1 MB0_CS_L[0, 1]
+ ; < 2 MA1_CS_L[0, 1]
+ ; < 3 MB1_CS_L[0, 1]
+ ; < 4 MA2_CS_L[0, 1]
+ ; < 5 MB2_CS_L[0, 1]
+ ; < 6 MA3_CS_L[0, 1]
+ ; < 7 MB3_CS_L[0, 1]
+ DimmValid UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is valid and is / will be configured
+ RegDimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is registered DIMM
+ LrDimmPresent UINT32 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved.
+ DimmEccPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ECC capable.
+ DimmParPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable.
+ DimmTrainFail UINT16 ? ; < Bitmap showing which dimms failed training
+ ChannelTrainFail UINT16 ? ; < Bitmap showing the channel information about failed Chip Selects
+ ; < 0 in any bit field indicates Channel 0
+ ; < 1 in any bit field indicates Channel 1
+ Dct UINT8 ? ; < Need to be removed
+ ; < DCT pointer
+ GangedMode BOOLEAN ? ; < Ganged mode
+ ; < 0 = disabled
+ ; < 1 = enabled
+ LogicalCpuid CPU_LOGICAL_ID {} ; < The logical CPUID of the node
+ HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space.
+ HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space.
+ MLoad UINT8 ? ; < Need to be removed
+ ; < Number of devices loading MAA bus
+ MaxAsyncLat UINT8 ? ; < Legacy wrapper
+ ChbD3Rcvrdly UINT8 ? ; < Legacy wrapper
+ ChaMaxRdLat UINT16 ? ; < Max Read Latency (ns) for DCT 0
+ ChbD3BcRcvrdly UINT8 ? ; < CHB DIMM 3 Check UINT8 Receiver Enable Delay
+
+ DctData POINTER ? ; < Pointed to a dynamically allocated array of DCT_STRUCTs
+ DctCount UINT8 ? ; < Number of DCTs per this Die
+ Reserved UINT8 (16) DUP (?) ; < Reserved
+DIE_STRUCT ENDS
+
+; *********************************************************************
+; * S3 Support structure
+; *********************************************************************
+ ; AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure
+AMD_S3_PARAMS STRUCT
+ Signature UINT32 ? ; < "ASTR" for AMD Suspend-To-RAM
+ Version UINT16 ? ; < S3 Params version number
+ Flags UINT32 ? ; < Indicates operation
+ NvStorage POINTER ? ; < Pointer to memory critical save state data
+ NvStorageSize UINT32 ? ; < Size in bytes of the NvStorage region
+ VolatileStorage POINTER ? ; < Pointer to remaining AMD save state data
+ VolatileStorageSize UINT32 ? ; < Size in bytes of the VolatileStorage region
+AMD_S3_PARAMS ENDS
+
+; ===============================================================================
+ ; MEM_PARAMETER_STRUCT
+ ; This data structure is used to pass wrapper parameters to the memory configuration code
+; ===============================================================================
+MEM_PARAMETER_STRUCT STRUCT
+
+ ; Basic (Return parameters)
+ ; (This section contains the outbound parameters from the memory init code)
+
+ GStatus BOOLEAN (GsbEOL) DUP (?) ; < Global Status bitfield
+ HoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping.
+ Sub4GCacheTop UINT32 ? ; < If not zero, the 32-bit top of cacheable memory.
+ Sub1THoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 1TB dram hole.
+ SysLimit UINT32 ? ; < Limit[47:16] (system address)
+ DDR3Voltage DIMM_VOLTAGE ? ; < Find support voltage and send back to platform BIOS.
+ ExternalVrefValue UINT8 ? ; < Target reference voltage for external Vref for 2D training
+ MemData POINTER ? ; < Pointer to MEM_DATA_STRUCT
+ ; Advanced (Optional parameters)
+ ; Optional (all defaults values will be initialized by the
+ ; 'AmdMemInitDataStructDef' based on AMD defaults. It is up
+ ; to the IBV/OEM to change the defaults after initialization
+ ; but prior to the main entry to the memory code):
+
+ ; Memory Map/Mgt.
+
+ BottomIo UINT16 ? ; < Bottom of 32-bit IO space (8-bits)
+ ; < NV_BOTTOM_IO[7:0]=Addr[31:24]
+ MemHoleRemapping BOOLEAN ? ; < Memory Hole Remapping (1-bit)
+ ; < FALSE = disable
+ ; < TRUE = enable
+ LimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1 TB
+ ; < FALSE = disable
+ ; < TRUE = enable
+ ; Dram Timing
+
+ UserTimingMode UINT32 ? ; < User Memclock Mode
+
+ MemClockValue UINT32 ? ; < Memory Clock Value
+
+ ; Dram Configuration
+
+ EnableBankIntlv BOOLEAN ? ; < Dram Bank (chip-select) Interleaving (1-bit)
+ ; < FALSE =disable (AMD default)
+ ; < TRUE =enable
+ EnableNodeIntlv BOOLEAN ? ; < Node Memory Interleaving (1-bit)
+ ; < FALSE = disable (AMD default)
+ ; < TRUE = enable
+ EnableChannelIntlv BOOLEAN ? ; < Channel Interleaving (1-bit)
+ ; < FALSE = disable (AMD default)
+ ; < TRUE = enable
+ ; ECC
+
+ EnableEccFeature BOOLEAN ? ; < enable ECC error to go into MCE
+ ; < FALSE = disable (AMD default)
+ ; < TRUE = enable
+ ; Dram Power
+
+ EnablePowerDown BOOLEAN ? ; < CKE based power down mode (1-bit)
+ ; < FALSE =disable (AMD default)
+ ; < TRUE =enable
+ ; Online Spare
+
+ EnableOnLineSpareCtl BOOLEAN ? ; < Chip Select Spare Control bit 0:
+ ; < FALSE = disable Spare (AMD default)
+ ; < TRUE = enable Spare
+ TableBasedAlterations POINTER ? ; < Point to an array of data bytes describing desired modifications to register settings.
+
+ PlatformMemoryConfiguration POINTER ?
+ ; < Points to a table that contains platform specific settings
+ ; < (i.e. MemClk routing, the number of DIMM slots per channel,...)
+ ; < AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that
+ ; < contains default conservative settings. Platform BIOS can either tweak
+ ; < DefaultPlatformMemoryConfiguration or reassign this pointer to its own table.
+ ; <
+ EnableParity BOOLEAN ? ; < Parity control
+ ; < TRUE = enable
+ ; < FALSE = disable (AMD default)
+ EnableBankSwizzle BOOLEAN ? ; < BankSwizzle control
+ ; < FALSE = disable
+ ; < TRUE = enable (AMD default)
+ EnableMemClr BOOLEAN ? ; < Memory Clear functionality control
+ ; < FALSE = disable
+ ; < TRUE = enable (AMD default)
+ ; Uma Configuration
+
+ UmaMode UMA_MODE ? ; < Uma Mode
+ ; < 0 = None
+ ; < 1 = Specified
+ ; < 2 = Auto
+ UmaSize UINT32 ? ; < The size of shared graphics dram (16-bits)
+ ; < NV_UMA_Size[31:0]=Addr[47:16]
+ ; <
+ UmaBase UINT32 ? ; < The allocated Uma base address (32-bits)
+ ; < NV_UMA_Base[31:0]=Addr[47:16]
+ ; <
+
+ ; Memory Restore Feature
+
+ MemRestoreCtl BOOLEAN ? ; < Memory context restore control
+ ; < FALSE = perform memory init as normal (AMD default)
+ ; < TRUE = restore memory context and skip training. This requires
+ ; < MemContext is valid before AmdInitPost
+ SaveMemContextCtl BOOLEAN ? ; < Control switch to save memory context at the end of MemAuto
+ ; < TRUE = AGESA will setup MemContext block before exit AmdInitPost
+ ; < FALSE = AGESA will not setup MemContext block. Platform is
+ ; < expected to call S3Save later in POST if it wants to
+ ; < use memory context restore feature.
+ MemContext AMD_S3_PARAMS {} ; < Memory context block describes the data that platform needs to
+ ; < save and restore for memory context restore feature to work.
+ ; < It uses the subset of S3Save block to save/restore. Hence platform
+ ; < may save only S3 block and uses it for both S3 resume and
+ ; < memory context restore.
+ ; < - If MemRestoreCtl is TRUE, platform needs to pass in MemContext
+ ; < before AmdInitPost.
+ ; < - If SaveMemContextCtl is TRUE, platform needs to save MemContext
+ ; < right after AmdInitPost.
+ IsCapsuleMode BOOLEAN ? ;< Capsule reboot control
+ ; < FALSE = This is not a capsule reboot.
+ ; < TRUE = This is a capsule reboot.
+ ; <
+ ExternalVrefCtl BOOLEAN ? ; < Control the use of external Vref
+ ; < TRUE = AGESA will use the function defined in "AGESA_EXTERNAL_2D_TRAIN_VREF_CHANGE" in function list
+ ; < to change the vref
+ ; < FALSE = AGESA will will use the internal vref control.
+ ForceTrainMode FORCE_TRAIN_MODE ? ; < Training Mode
+ ; < 0 = Force 1D Training for all configurations
+ ; < 1 = Force 2D Training for all configurations
+ ; < 2 = Auto - AGESA will control 1D or 2D
+ DimmTypeUsedInMixedConfig TECHNOLOGY_TYPE ? ; < Select the preferred technology type that AGESA will enable
+ ; < when it is mixed with other technology types.
+ ; < DDR3_TECHNOLOGY = Use DDR3 DIMMs
+ ; < GDDR5_TECHNOLOGY = Use GDDR5 DIMMs
+ ; < UNSUPPORTED_TECHNOLOGY = Exit with fatal error when DDR3 and GDDR5 DIMMs
+ ; < are installed on the same system
+ AmpEnable BOOLEAN ? ; < AMP functionality control
+ ; < TRUE = Enable, platform BIOS requests to enable memory overclocking function, and AGESA
+ ; < detects if memory is capable of it
+ ; < FALSE = Disable, there is no request to enable memory overclocking function
+ ; <
+ AmpWarningMsgEnable BOOLEAN ? ; < AMP warning messages control
+ ; < TRUE = Enable to log the warning messages of AMP
+ ; < FALSE = Disable
+ ; <
+ AmpStatus AMP_STATUS {} ; < AMP status allows platform BIOS to check which voltage or warning message it should
+ ; < use/apply.
+ ; <
+ ; < AmpVoltageValid :
+ ; < TRUE - AGESA does enable AMP function, so use AmpVoltage for voltage adjustment
+ ; < FALSE - AGESA does not enable AMP function, so use DDR3Voltage for voltage adjustment
+ ; <
+ ; < AmpSupportDetectedButNotEnabled :
+ ; < TRUE - Display warning message of "AMP support detected but not enabled"
+ ; < FALSE - No corresponding message should be displayed
+ ; <
+ ; < AmpSelectedButNotEnabled :
+ ; < TRUE - Display warning message of "AMP selected but not enabled"
+ ; < FALSE - No corresponding message should be displayed
+ ; <
+ ; < Note that both of warning message status reports are controlled by AmpWarningMsgEnable
+ ; <
+ AmpVoltage AMP_DIMM_VOLTAGE ? ; < AMP voltage which will be sent back to platform BIOS, and
+ ; < the value in AmpVoltage is valid only if AmpStatus is TRUE returned
+ DataEyeEn BOOLEAN ? ; < Get 2D training data eye.
+ ; < TRUE = Enable to get the 2D data eye.
+ ; < FALSE = The 2D data eye is not enabled.
+ ; <
+ DramDoubleRefreshRate BOOLEAN ? ; < Specify the average time between refresh requests to all DRAM devices.
+ ; < TRUE = 2x refresh rate (3.9us)
+ ; < FALSE = 1x refresh rate (7.8us)
+MEM_PARAMETER_STRUCT ENDS
+
+
+; ===============================================================================
+ ; Function definition
+ ; This data structure passes function pointers to the memory configuration code.
+ ; The wrapper can use this structure with customized versions
+; ================================================================================
+MEM_FUNCTION_STRUCT STRUCT
+
+ ; PUBLIC required Internal functions
+
+ amdMemGetPsCfgU POINTER ? ; < Proc for Unbuffered DIMMs, platform specific
+ amdMemGetPsCfgR POINTER ? ; < Proc for Registered DIMMs, platform specific
+
+ ; PUBLIC optional functions
+
+ amdMemEccInit POINTER ? ; < NB proc for ECC feature
+ amdMemChipSelectInterleaveInit POINTER ? ; < NB proc for CS interleave feature
+ amdMemDctInterleavingInit POINTER ? ; < NB proc for Channel interleave feature
+ amdMemMctInterleavingInit POINTER ? ; < NB proc for Node interleave feature
+ amdMemParallelTraining POINTER ? ; < NB proc for parallel training feature
+ amdMemEarlySampleSupport POINTER ? ; < NB code for early sample support feature
+ amdMemMultiPartInitSupport POINTER ? ; < NB code for 'multi-part'
+ amdMemOnlineSpareSupport POINTER ? ; < NB code for On-Line Spare feature
+ amdMemUDimmInit POINTER ? ; < NB code for UDIMMs
+ amdMemRDimmInit POINTER ? ; < NB code for RDIMMs
+ amdMemLrDimmInit POINTER ? ; < NB code for LRDIMMs
+ Reserved UINT32 (100) DUP (?) ; < Reserved for later function definition
+MEM_FUNCTION_STRUCT ENDS
+
+; ===============================================================================
+ ; Socket Structure
+
+; ===============================================================================
+MEM_SOCKET_STRUCT STRUCT
+ ChannelPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels training data
+
+ TimingsPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels timing data
+
+MEM_SOCKET_STRUCT ENDS
+
+; ===============================================================================
+ ; MEM_DATA_STRUCT
+; ===============================================================================
+MEM_DATA_STRUCT STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header
+
+ ParameterListPtr POINTER ? ; < List of input Parameters
+
+ FunctionList MEM_FUNCTION_STRUCT {} ; < List of function Pointers
+
+ GetPlatformCfg POINTER (MAX_PLATFORM_TYPES) DUP (?) ; < look-up platform info
+
+ ErrorHandling POINTER ? ; < Error Handling
+
+ ; SocketList is a shortcut for IBVs to retrieve training
+ ; and timing data for each channel indexed by socket/channel,
+ ; eliminating their need to parse die/dct/channel etc.
+ ; It contains pointers to the populated data structures for
+ ; each channel and skips the channel structures that are
+ ; unpopulated. In the case of channels sharing the same DCT,
+ ; the pTimings pointers will point to the same DCT Timing data.
+
+ SocketList MEM_SOCKET_STRUCT (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Socket list for memory code
+
+ DiesPerSystem POINTER ? ; < Pointed to an array of DIE_STRUCTs
+ DieCount UINT8 ? ; < Number of MCTs in the system.
+
+ SpdDataStructure POINTER ? ; < Pointer to SPD Data structure
+
+ PlatFormConfig POINTER ? ; < Pointer to Platform profile/build option config structure
+
+ IsFlowControlSupported BOOLEAN ? ; < Indicates if flow control is supported
+
+ TscRate UINT32 ? ; < The rate at which the TSC increments in megahertz.
+
+MEM_DATA_STRUCT ENDS
+
+; ===============================================================================
+; UMA_INFO_STRUCT
+; ===============================================================================
+UMA_INFO STRUCT
+ UmaBase UINT64 ? ; < UmaBase[63:0] = Addr[63:0]
+ UmaSize UINT32 ? ; < UmaSize[31:0] = Addr[31:0]
+ UmaAttributes UINT32 ? ; < Indicate the attribute of Uma
+ UmaMode UINT8 ? ; < Indicate the mode of Uma
+ MemClock UINT16 ? ; < Indicate memory running speed in MHz
+ MemType UINT8 ? ; < Indicate the DRAM technology type that is being used
+ Reserved UINT8 (2) DUP (?) ; < Reserved for future usage
+UMA_INFO ENDS
+
+; ===============================================================================
+; Bitfield for ID
+; ===============================================================================
+ID_FIELD STRUCT
+ SocketId UINT16 ?
+; OUT UINT16 SocketId:8; ; < Socket ID
+; OUT UINT16 ModuleId:8; ; < Module ID
+ID_FIELD ENDS
+
+; ===============================================================================
+; Union for ID of socket and module that will be passed out in call out
+; ===============================================================================
+ID_INFO UNION
+ IdField ID_FIELD {} ; < Bitfield for ID
+ IdInformation UINT16 ? ; < ID information for call out
+ID_INFO ENDS
+
+ ; AGESA MEMORY ERRORS
+
+ ; AGESA_SUCCESS memory events
+MEM_EVENT_CAPSULE_IN_EFFECT EQU 04013600h ; < Capsule is in effect
+MEM_EVENT_CONTEXT_RESTORE_IN_EFFECT EQU 04023600h ; < Context restore is in effect
+
+ ; AGESA_ALERT Memory Errors
+MEM_ALERT_USER_TMG_MODE_OVERRULED EQU 04010000h ; < TIMING_MODE_SPECIFIC is requested but
+ ; < cannot be applied to current configurations.
+MEM_ALERT_ORG_MISMATCH_DIMM EQU 04010100h ; < DIMM organization miss-match
+MEM_ALERT_BK_INT_DIS EQU 04010200h ; < Bank interleaving disable for internal issue
+
+ ; AGESA_ERROR Memory Errors
+MEM_ERROR_NO_DQS_POS_RD_WINDOW EQU 04010300h ; < No DQS Position window for RD DQS
+MEM_ERROR_SMALL_DQS_POS_RD_WINDOW EQU 04020300h ; < Small DQS Position window for RD DQS
+MEM_ERROR_NO_DQS_POS_WR_WINDOW EQU 04030300h ; < No DQS Position window for WR DQS
+MEM_ERROR_SMALL_DQS_POS_WR_WINDOW EQU 04040300h ; < Small DQS Position window for WR DQS
+MEM_ERROR_ECC_DIS EQU 04010400h ; < ECC has been disabled as a result of an internal issue
+MEM_ERROR_DIMM_SPARING_NOT_ENABLED EQU 04010500h ; < DIMM sparing has not been enabled for an internal issues
+MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE EQU 04050300h ; < Receive Enable value is too large
+MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW EQU 04060300h ; < There is no DQS receiver enable window
+MEM_ERROR_DRAM_ENABLED_TIME_OUT EQU 04010600h ; < Time out when polling DramEnabled bit
+MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT EQU 04010700h ; < Time out when polling DctAccessDone bit
+MEM_ERROR_SEND_CTRL_WORD_TIME_OUT EQU 04010800h ; < Time out when polling SendCtrlWord bit
+MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT EQU 04010900h ; < Time out when polling PrefDramTrainMode bit
+MEM_ERROR_ENTER_SELF_REF_TIME_OUT EQU 04010A00h ; < Time out when polling EnterSelfRef bit
+MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT EQU 04010B00h ; < Time out when polling FreqChgInProg bit
+MEM_ERROR_EXIT_SELF_REF_TIME_OUT EQU 04020A00h ; < Time out when polling ExitSelfRef bit
+MEM_ERROR_SEND_MRS_CMD_TIME_OUT EQU 04010C00h ; < Time out when polling SendMrsCmd bit
+MEM_ERROR_SEND_ZQ_CMD_TIME_OUT EQU 04010D00h ; < Time out when polling SendZQCmd bit
+MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT EQU 04010E00h ; < Time out when polling DctExtraAccessDone bit
+MEM_ERROR_MEM_CLR_BUSY_TIME_OUT EQU 04010F00h ; < Time out when polling MemClrBusy bit
+MEM_ERROR_MEM_CLEARED_TIME_OUT EQU 04020F00h ; < Time out when polling MemCleared bit
+MEM_ERROR_FLUSH_WR_TIME_OUT EQU 04011000h ; < Time out when polling FlushWr bit
+MEM_ERROR_NBPSTATE_TRANSITION_TIME_OUT EQU 04012600h ; < Time out when polling CurNBPstate bit
+MEM_ERROR_MAX_LAT_NO_WINDOW EQU 04070300h ; < Fail to find pass during Max Rd Latency training
+MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL EQU 04080300h ; < Fail to launch training code on an AP
+MEM_ERROR_PARALLEL_TRAINING_TIME_OUT EQU 04090300h ; < Fail to finish parallel training
+MEM_ERROR_NO_ADDRESS_MAPPING EQU 04011100h ; < No address mapping found for a dimm
+MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT EQU 040A0300h ; < There is no DQS receiver enable window and the value is equal to the largest value
+MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE EQU 040B0300h ; < Receive Enable value is too large and is 1 less than limit
+MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR EQU 04011200h ; < SPD Checksum error for NV_SPDCHK_RESTRT
+MEM_ERROR_NO_CHIPSELECT EQU 04011300h ; < No chipselects found
+MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM EQU 04011500h ; < Unbuffered dimm is not supported at 333MHz
+MEM_ERROR_WL_PRE_OUT_OF_RANGE EQU 040C0300h ; < Returned PRE value during write levelization was out of range
+MEM_ERROR_NO_2D_RDDQS_WINDOW EQU 040D0300h ; < No 2D RdDqs Window
+MEM_ERROR_NO_2D_RDDQS_HEIGHT EQU 040E0300h ; < No 2D RdDqs Height
+MEM_ERROR_2D_DQS_ERROR EQU 040F0300h ; < 2D RdDqs Error
+MEM_ERROR_INVALID_2D_RDDQS_VALUE EQU 04022400h ; < 2d RdDqs invalid value found
+MEM_ERROR_2D_DQS_VREF_MARGIN_ERROR EQU 04023400h ; < 2d RdDqs Vef Margin error found
+MEM_ERROR_LR_IBT_NOT_FOUND EQU 04013500h ; < No LR dimm IBT value is found
+MEM_ERROR_MR0_NOT_FOUND EQU 04023500h ; < No MR0 value is found
+MEM_ERROR_ODT_PATTERN_NOT_FOUND EQU 04033500h ; < No odt pattern value is found
+MEM_ERROR_RC2_IBT_NOT_FOUND EQU 04043500h ; < No RC2 IBT value is found
+MEM_ERROR_RC10_OP_SPEED_NOT_FOUND EQU 04053500h ; < No RC10 op speed is found
+MEM_ERROR_RTT_NOT_FOUND EQU 04063500h ; < No RTT value is found
+MEM_ERROR_P2D_NOT_FOUND EQU 04073500h ; < No 2D training config value is found
+MEM_ERROR_SAO_NOT_FOUND EQU 04083500h ; < No slow access mode, Address timing and Output driver compensation value is found
+MEM_ERROR_CLK_DIS_MAP_NOT_FOUND EQU 04093500h ; < No CLK disable map is found
+MEM_ERROR_CKE_TRI_MAP_NOT_FOUND EQU 040A3500h ; < No CKE tristate map is found
+MEM_ERROR_ODT_TRI_MAP_NOT_FOUND EQU 040B3500h ; < No ODT tristate map is found
+MEM_ERROR_CS_TRI_MAP_NOT_FOUND EQU 040C3500h ; < No CS tristate map is found
+MEM_ERROR_TRAINING_SEED_NOT_FOUND EQU 040D3500h ; < No training seed is found
+MEM_ERROR_NO_2D_WRDAT_WINDOW EQU 040D0400h ; < No 2D WrDat Window
+MEM_ERROR_NO_2D_WRDAT_HEIGHT EQU 040E0400h ; < No 2D WrDat Height
+MEM_ERROR_2D_WRDAT_ERROR EQU 040F0400h ; < 2d WrDat Error
+MEM_ERROR_INVALID_2D_WRDAT_VALUE EQU 04100400h ; < 2d WrDat invalid value found
+MEM_ERROR_2D_WRDAT_VREF_MARGIN_ERROR EQU 04110400h ; < 2d WrDat Vef Margin error found
+
+ ; AGESA_WARNING Memory Errors
+ MEM_WARNING_UNSUPPORTED_QRDIMM EQU 04011600h ; < QR DIMMs detected but not supported
+ MEM_WARNING_UNSUPPORTED_UDIMM EQU 04021600h ; < U DIMMs detected but not supported
+ MEM_WARNING_UNSUPPORTED_SODIMM EQU 04031600h ; < SO-DIMMs detected but not supported
+ MEM_WARNING_UNSUPPORTED_X4DIMM EQU 04041600h ; < x4 DIMMs detected but not supported
+ MEM_WARNING_UNSUPPORTED_RDIMM EQU 04051600h ; < R DIMMs detected but not supported
+ MEM_WARNING_UNSUPPORTED_LRDIMM EQU 04061600h ; < LR DIMMs detected but not supported
+
+ MEM_WARNING_EMP_NOT_SUPPORTED EQU 04011700h ; < Processor is not capable for EMP
+ MEM_WARNING_EMP_CONFLICT EQU 04021700h ; < EMP cannot be enabled if channel interleaving,
+ ; < bank interleaving, or bank swizzle is enabled.
+ MEM_WARNING_EMP_NOT_ENABLED EQU 04031700h ; < Memory size is not power of two.
+ MEM_WARNING_ECC_DIS EQU 04041700h ; < ECC has been disabled as a result of an internal issue
+ MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED EQU 04011800h ; < Performance has been enabled, but battery life is preferred.
+ MEM_WARNING_NO_SPDTRC_FOUND EQU 04011900h ; < No Trc timing value found in SPD of a dimm.
+ MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED EQU 04012000h ; < Node Interleaveing Requested, but could not be enabled
+ MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED EQU 04012100h ; < Channel Interleaveing Requested, but could not be enabled
+ MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED EQU 04012200h ; < Bank Interleaveing Requested, but could not be enabled
+ MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED EQU 04012300h ; < Voltage 1.35 determined, but could not be supported
+ MEM_WARNING_INITIAL_DDR3VOLT_NONZERO EQU 04012400h ; < DDR3 voltage initial value is not 0
+ MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO EQU 04012500h ; < Cannot find a commonly supported VDDIO
+ MEM_WARNING_AMP_SUPPORT_DETECTED_BUT_NOT_ENABLED EQU 04012900h ; < AMP support detected but not enabled
+ MEM_WARNING_AMP_SELECTED_BUT_NOT_ENABLED EQU 04022900h ; < AMP selected but not enabled
+
+
+ ; AGESA_FATAL Memory Errors
+ MEM_ERROR_MINIMUM_MODE EQU 04011A00h ; < Running in minimum mode
+ MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM EQU 04011B00h ; < DIMM modules are miss-matched
+ MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM EQU 04011C00h ; < No DIMMs have been found on system
+ MEM_ERROR_MISMATCH_DIMM_CLOCKS EQU 04011D00h ; < DIMM clocks miss-matched
+ MEM_ERROR_NO_CYC_TIME EQU 04011E00h ; < No cycle time found
+ MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS EQU 04011F00h ; < Heap allocation error with dynamic storing of trained timings
+ MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs EQU 04021F00h ; < Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT
+ MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV EQU 04031F00h ; < Heap allocation error with REMOTE_TRAINING_ENV
+ MEM_ERROR_HEAP_ALLOCATE_FOR_SPD EQU 04041F00h ; < Heap allocation error for SPD data
+ MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA EQU 04051F00h ; < Heap allocation error for RECEIVED_DATA during parallel training
+ MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS EQU 04061F00h ; < Heap allocation error for S3 "SPECIAL_CASE_REGISTER"
+ MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA EQU 04071F00h ; < Heap allocation error for Training Data
+ MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK EQU 04081F00h ; < Heap allocation error for DIMM Identify "MEM_NB_BLOCK
+ MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM EQU 04022300h ; < No Constructor for DIMM Identify
+ MEM_ERROR_VDDIO_UNSUPPORTED EQU 04022500h ; < VDDIO of the dimms on the board is not supported
+ MEM_ERROR_HEAP_ALLOCATE_FOR_2D EQU 040B1F00h ; < Heap allocation error for 2D training data
+ MEM_ERROR_HEAP_DEALLOCATE_FOR_2D EQU 040C1F00h ; < Heap de-allocation error for 2D training data
+ MEM_ERROR_HEAP_ALLOCATE_FOR_DATAEYE EQU 040F1F00h ; < Heap allocation error for DATAEYE Storage
+ MEM_ERROR_HEAP_DEALLOCATE_FOR_DATAEYE EQU 040E1F00h ; < Heap de-allocation error for DATAEYE Storage
+
+ ; AGESA_CRITICAL Memory Errors
+ MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 EQU 04091F00h ; < Heap allocation error for DMI table for DDR3
+ MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 EQU 040A1F00h ; < Heap allocation error for DMI table for DDR2
+ MEM_ERROR_UNSUPPORTED_DIMM_CONFIG EQU 04011400h ; < Dimm population is not supported
+ MEM_ERROR_HEAP_ALLOCATE_FOR_CRAT_MEM_AFFINITY EQU 040D1F00h ;< Heap allocation error for CRAT memory affinity info
+
+; ----------------------------------------------------------------------------
+; *
+; * END OF MEMORY-SPECIFIC DATA STRUCTURES
+; *
+; *----------------------------------------------------------------------------
+;
+
+
+; ----------------------------------------------------------------------------
+; *
+; * CPU RELATED DEFINITIONS
+; *
+; *----------------------------------------------------------------------------
+;
+
+; CPU Event definitions.
+
+; Defines used to filter CPU events based on functional blocks
+CPU_EVENT_PM_EVENT_MASK EQU 0FF00FF00h
+CPU_EVENT_PM_EVENT_CLASS EQU 008000400h
+
+;================================================================
+; CPU General events
+; Heap allocation (AppFunction = 01h)
+CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT EQU 008000100h
+CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED EQU 008010100h
+CPU_ERROR_HEAP_IS_FULL EQU 008020100h
+CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED EQU 008030100h
+CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT EQU 008040100h
+; BrandId (AppFunction = 02h)
+CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE EQU 008000200h
+; Micro code patch (AppFunction = 03h)
+CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED EQU 008000300h
+; Power management (AppFunction = 04h)
+CPU_EVENT_PM_PSTATE_OVERCURRENT EQU 008000400h
+CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT EQU 008010400h
+CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE EQU 008020400h
+CPU_ERROR_PM_NB_PSTATE_MISMATCH EQU 008030400h
+; TDP Limiting
+CPU_EVENT_TDP_LIMIT_FORCE_TO_50_PERCENTAGE EQU 008060100h
+CPU_ERROR_TDP_LIMIT_SAVE_PSTATE_FAIL EQU 008060200h
+CPU_ERROR_TDP_LIMIT_RESTORE_PSTATE_FAIL EQU 008060201h
+CPU_ERROR_TDP_LIMIT_TDP2WATT_IS_ZERO EQU 008060202h
+CPU_ERROR_TDP_LIMIT_INVALID_INPUT EQU 008060203h
+; Other CPU events (AppFunction = 05h)
+CPU_EVENT_BIST_ERROR EQU 008000500h
+CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY EQU 008010500h
+CPU_EVENT_STACK_REENTRY EQU 008020500h
+CPU_EVENT_CORE_NOT_IDENTIFIED EQU 008030500h
+;=================================================================
+; CPU Feature events
+; Execution cache (AppFunction = 21h)
+; AGESA_CACHE_SIZE_REDUCED 2101
+; AGESA_CACHE_REGIONS_ACROSS_1MB 2102
+; AGESA_CACHE_REGIONS_ACROSS_4GB 2103
+; AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104
+; AGESA_CACHE_START_ADDRESS_LESS_D0000 2105
+; AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106
+; AGESA_DEALLOCATE_CACHE_REGIONS 2107
+CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR EQU 008002100h
+; Core Leveling (AppFunction = 22h)
+CPU_WARNING_ADJUSTED_LEVELING_MODE EQU 008002200h
+; HT Assist (AppFunction = 23h)
+CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG EQU 008002300h
+; SCS initialization (AppFunction = 24h)
+; AGESA_SCS_HEAP_ENTRY_MISSING 2401
+; AGESA_SCS_BUFFER_EMPTY 2402
+; AGESA_SCS_WEIGHTS_MISMATCH 2403
+CPU_EVENT_SCS_INITIALIZATION_ERROR EQU 008002400h
+
+; CPU Build Configuration structures and definitions
+
+; Build Configuration values for BLDGCFG_AP_MTRR_SETTINGS
+AP_MTRR_SETTINGS STRUCT
+ MsrAddr UINT32 ? ; < Fixed-Sized MTRR address
+ MsrData UINT64 ? ; < MTRR Settings
+AP_MTRR_SETTINGS ENDS
+
+AMD_AP_MTRR_FIX64k_00000 EQU 000000250h
+AMD_AP_MTRR_FIX16k_80000 EQU 000000258h
+AMD_AP_MTRR_FIX16k_A0000 EQU 000000259h
+AMD_AP_MTRR_FIX4k_C0000 EQU 000000268h
+AMD_AP_MTRR_FIX4k_C8000 EQU 000000269h
+AMD_AP_MTRR_FIX4k_D0000 EQU 00000026Ah
+AMD_AP_MTRR_FIX4k_D8000 EQU 00000026Bh
+AMD_AP_MTRR_FIX4k_E0000 EQU 00000026Ch
+AMD_AP_MTRR_FIX4k_E8000 EQU 00000026Dh
+AMD_AP_MTRR_FIX4k_F0000 EQU 00000026Eh
+AMD_AP_MTRR_FIX4k_F8000 EQU 00000026Fh
+CPU_LIST_TERMINAL EQU 0FFFFFFFFh
+
+; ***********************************************************************
+; *
+; * AGESA interface Call-Out function parameter structures
+; *
+; **********************************************************************
+
+ ; Parameters structure for interface call-out AgesaAllocateBuffer
+AGESA_BUFFER_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard header
+ BufferLength UINT32 ? ; < Size of buffer to allocate
+ BufferHandle UINT32 ? ; < Identifier or name for the buffer
+ BufferPointer POINTER ? ; < location of the created buffer
+AGESA_BUFFER_PARAMS ENDS
+
+ ; Parameters structure for interface call-out AgesaRunCodeOnAp
+AP_EXE_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard header
+ FunctionNumber UINT32 ? ; < Index of the procedure to execute
+ RelatedDataBlock POINTER ? ; < Location of data structure the procedure will use
+ RelatedBlockLength UINT32 ? ; < Size of the related data block
+AP_EXE_PARAMS ENDS
+
+ ; Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery
+AGESA_READ_SPD_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < standard header
+ SocketId UINT8 ? ; < Address of SPD - socket ID
+ MemChannelId UINT8 ? ; < Address of SPD - memory channel ID
+ DimmId UINT8 ? ; < Address of SPD - DIMM ID
+ Buffer POINTER ? ; < Location where to place the SPD content
+ MemData POINTER ? ; < Location of the MemData structure, for reference
+AGESA_READ_SPD_PARAMS ENDS
+
+; VoltageType values
+ VTYPE_CPU_VREF EQU 0 ; < Cpu side Vref
+ VTYPE_DIMM_VREF EQU 1 ; < Dimm Side Vref
+ VTYPE_VDDIO EQU 2 ; < Vddio
+VTYPE TEXTEQU <DWORD>
+
+; Parameters structure for the interface call-out AgesaExternalVoltageAdjust
+VOLTAGE_ADJUST STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard configuration header
+ MemData POINTER ? ; < Location of the MemData structure, for reference
+ VoltageType VTYPE ? ; < Which Voltage Type to adjust
+ AdjustValue INT8 ? ; < Positive/Negative Ajdust Value
+VOLTAGE_ADJUST ENDS
+
+ ; Buffer Handles
+ AMD_DMI_INFO_BUFFER_HANDLE EQU 000D000h ; < Assign 0x000D000 buffer handle to DMI function
+ AMD_PSTATE_DATA_BUFFER_HANDLE EQU 000D001h ; < Assign 0x000D001 buffer handle to Pstate data
+ AMD_PSTATE_ACPI_BUFFER_HANDLE EQU 000D002h ; < Assign 0x000D002 buffer handle to Pstate table
+ AMD_BRAND_ID_BUFFER_HANDLE EQU 000D003h ; < Assign 0x000D003 buffer handle to Brand ID
+ AMD_ACPI_SLIT_BUFFER_HANDLE EQU 000D004h ; < Assign 0x000D004 buffer handle to SLIT function
+ AMD_SRAT_INFO_BUFFER_HANDLE EQU 000D005h ; < Assign 0x000D005 buffer handle to SRAT function
+ AMD_WHEA_BUFFER_HANDLE EQU 000D006h ; < Assign 0x000D006 buffer handle to WHEA function
+ AMD_S3_INFO_BUFFER_HANDLE EQU 000D007h ; < Assign 0x000D007 buffer handle to S3 function
+ AMD_S3_NB_INFO_BUFFER_HANDLE EQU 000D008h ; < Assign 0x000D008 buffer handle to S3 NB device info
+ AMD_ACPI_ALIB_BUFFER_HANDLE EQU 000D009h ; < Assign 0x000D009 buffer handle to ALIB SSDT table
+ AMD_ACPI_IVRS_BUFFER_HANDLE EQU 000D00Ah ; < Assign 0x000D00A buffer handle to IOMMU IVRS table
+ AMD_CRAT_INFO_BUFFER_HANDLE EQU 000D00Bh ; < Assign 0x000D00B buffer handle to CRAT function
+ AMD_ACPI_CDIT_BUFFER_HANDLE EQU 000D00Ch ; < Assign 0x000D00C buffer handle to CDIT function
+AMD_BUFFER_HANDLE TEXTEQU <DWORD>
+; ***********************************************************************
+; *
+; * AGESA interface Call-Out function prototypes
+; *
+; **********************************************************************
+
+; ***********************************************************************
+; *
+; * AGESA interface structure definition and function prototypes
+; *
+; **********************************************************************
+
+; *********************************************************************
+; * Platform Configuration: The parameters in boot branch function
+; *********************************************************************
+
+; The possible platform control flow settings.
+ Nfcm EQU 0 ; < Normal Flow Control Mode.
+ UmaDr EQU 1 ; < UMA using Display Refresh flow control.
+ UmaIfcm EQU 2 ; < UMA using Isochronous Flow Control.
+ Ifcm EQU 3 ; < Isochronous Flow Control Mode (other than for UMA).
+ Iommu EQU 4 ; < An IOMMU is in use in the system.
+ MaxControlFlow EQU 5 ; < Not a control flow mode, use for limit checking.
+PLATFORM_CONTROL_FLOW TEXTEQU <DWORD>
+
+; Platform Deemphasis Levels.
+ DeemphasisLevelNone EQU 0 ; < No Deemphasis.
+ DeemphasisLevelMinus3 EQU 1 ; < Minus 3 db deemphasis.
+ DeemphasisLevelMinus6 EQU 2 ; < Minus 6 db deemphasis.
+ DeemphasisLevelMinus8 EQU 3 ; < Minus 8 db deemphasis.
+ DeemphasisLevelMinus11 EQU 4 ; < Minus 11 db deemphasis.
+ DeemphasisLevelMinus11pre8 EQU 5 ; < Minus 11, Minus 8 precursor db deemphasis.
+ DcvLevelNone EQU 16 ; < No DCV Deemphasis.
+ DcvLevelMinus2 EQU 17 ; < Minus 2 db DCV deemphasis.
+ DcvLevelMinus3 EQU 18 ; < Minus 3 db DCV deemphasis.
+ DcvLevelMinus5 EQU 19 ; < Minus 5 db DCV deemphasis.
+ DcvLevelMinus6 EQU 20 ; < Minus 6 db DCV deemphasis.
+ DcvLevelMinus7 EQU 21 ; < Minus 7 db DCV deemphasis.
+ DcvLevelMinus8 EQU 22 ; < Minus 8 db DCV deemphasis.
+ DcvLevelMinus9 EQU 23 ; < Minus 9 db DCV deemphasis.
+ DcvLevelMinus11 EQU 24 ; < Minus 11 db DCV deemphasis.
+ MaxPlatformDeemphasisLevel EQU 25 ; < Not a deemphasis level, use for limit checking.
+PLATFORM_DEEMPHASIS_LEVEL TEXTEQU <DWORD>
+
+; Provide Deemphasis Levels for HT Links.
+;
+; For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will
+; be checked for a match. The item matches for a Socket, Link if the link frequency is
+; is in the inclusive range HighFreq:LoFreq.
+; AGESA does not set deemphasis in IO devices, only in processors.
+
+CPU_HT_DEEMPHASIS_LEVEL STRUCT
+ ; Match fields
+ Socket UINT8 ? ; < One Socket on which this Link is located
+ Link UINT8 ? ; < The Link on this Processor.
+ LoFreq UINT8 ? ; < If the link is set to this frequency or greater, apply these levels, and
+ HighFreq UINT8 ? ; < If the link is set to this frequency or less, apply these levels.
+ ; Value fields
+ ReceiverDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The deemphasis level for this link
+ DcvDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The DCV, or far transmitter deemphasis level.
+CPU_HT_DEEMPHASIS_LEVEL ENDS
+
+; The possible hardware prefetch mode settings.
+ HARDWARE_PREFETCHER_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled.
+ DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES EQU 1 ; Use the recommended setting for the hardware prefetcher, but disable training on software prefetches.
+ DISABLE_L1_PREFETCHER EQU 2 ; Use the recommended settings for the hardware prefetcher, but disable L1 prefetching and above.
+ DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES EQU 3 ; (deprecated) - This setting is deprecated; it has the same effect as DISABLE_L1_PREFETCHER
+ DISABLE_L2_STRIDE_PREFETCHER EQU 4 ; Use the recommended settings for the hardware prefetcher, but disable the L2 stride prefetcher and above
+ DISABLE_HARDWARE_PREFETCH EQU 5 ; Disable hardware prefetching.
+ MAX_HARDWARE_PREFETCH_MODE EQU 6 ; Not a hardware prefetch mode, use for limit checking.
+HARDWARE_PREFETCH_MODE TEXTEQU <DWORD>
+
+; The possible software prefetch mode settings.
+ SOFTWARE_PREFETCHES_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled.
+ DISABLE_SOFTWARE_PREFETCHES EQU 1 ; Disable software prefetches (convert software prefetch instructions to NOP).
+ MAX_SOFTWARE_PREFETCH_MODE EQU 2 ; Not a software prefetch mode, use for limit checking.
+SOFTWARE_PREFETCH_MODE TEXTEQU <DWORD>
+
+; Advanced performance tunings, prefetchers.
+; These settings provide for performance tuning to optimize for specific workloads.
+ADVANCED_PERFORMANCE_PROFILE STRUCT
+ HardwarePrefetchMode HARDWARE_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the hardware prefetcher setting.
+ SoftwarePrefetchMode SOFTWARE_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the software prefetch instructions.
+ DramPrefetchMode DRAM_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the DRAM prefetcher setting.
+ADVANCED_PERFORMANCE_PROFILE ENDS
+
+; The possible platform power policy settings.
+ Performance EQU 0 ; < Optimize for performance.
+ BatteryLife EQU 1 ; < Optimize for battery life.
+ MaxPowerPolicy EQU 2 ; < Not a power policy mode, use for limit checking.
+PLATFORM_POWER_POLICY TEXTEQU <DWORD>
+
+; Platform performance settings for optimized settings.
+; Several configuration settings for the processor depend upon other parts and
+; general designer choices for the system. The determination of these data points
+; is not standard for all platforms, so the host environment needs to provide these
+; to specify how the system is to be configured.
+PERFORMANCE_PROFILE STRUCT
+ PlatformControlFlowMode PLATFORM_CONTROL_FLOW ? ; < The platform's control flow mode for optimum platform performance.
+ UseHtAssist BOOLEAN ? ; < HyperTransport link traffic optimization.
+ UseAtmMode BOOLEAN ? ; < HyperTransport link traffic optimization.
+ UseNeighborCache BOOLEAN ? ; < Neighbor cache mode
+ Use32ByteRefresh BOOLEAN ? ; < Display Refresh traffic generates 32 byte requests.
+ UseVariableMctIsocPriority BOOLEAN ? ; < The Memory controller will be set to Variable Isoc Priority.
+ AdvancedPerformanceProfile ADVANCED_PERFORMANCE_PROFILE {} ; < The advanced platform performance settings.
+ PlatformPowerPolicy PLATFORM_POWER_POLICY ? ; < The platform's desired power policy
+ NbPstatesSupported BOOLEAN ? ; < The Nb-Pstates is supported or not
+PERFORMANCE_PROFILE ENDS
+
+; Platform settings that describe the voltage regulator modules of the system.
+; Many power management settings are dependent upon the characteristics of the
+; on-board voltage regulator module (VRM). The host environment needs to provide
+; these to specify how the system is to be configured.
+PLATFORM_VRM_CONFIGURATION STRUCT
+ CurrentLimit UINT32 ? ; < Vrm Current Limit.
+ LowPowerThreshold UINT32 ? ; < Vrm Low Power Threshold.
+ SlewRate UINT32 ? ; < Vrm Slew Rate.
+ HiSpeedEnable BOOLEAN ? ; < Select high speed VRM.
+ MaximumCurrentLimit UINT32 ? ; < Vrm Maximum Current Limit.
+ SviOcpLevel UINT32 ? ; < Vrm SVI OCP Level.
+PLATFORM_VRM_CONFIGURATION ENDS
+
+; The VRM types to characterize.
+ CoreVrm EQU 0 ; < VDD plane.
+ NbVrm EQU 1 ; < VDDNB plane.
+ MaxVrmType EQU 2 ; < Not a valid VRM type, use for limit checking.
+PLATFORM_VRM_TYPE TEXTEQU <DWORD>
+
+; FCH Platform Configuration Policy
+FCH_PLATFORM_POLICY STRUCT
+ CfgSmbus0BaseAddress UINT16 ? ; SMBUS0 Controller Base Address
+ CfgSmbus1BaseAddress UINT16 ? ; SMBUS1 Controller Base Address
+ CfgSioPmeBaseAddress UINT16 ? ; I/O base address for LPC I/O target range
+ CfgAcpiPm1EvtBlkAddr UINT16 ? ; I/O base address of ACPI power management Event Block
+ CfgAcpiPm1CntBlkAddr UINT16 ? ; I/O base address of ACPI power management Control Block
+ CfgAcpiPmTmrBlkAddr UINT16 ? ; I/O base address of ACPI power management Timer Block
+ CfgCpuControlBlkAddr UINT16 ? ; I/O base address of ACPI power management CPU Control Block
+ CfgAcpiGpe0BlkAddr UINT16 ? ; I/O base address of ACPI power management General Purpose Event Block
+ CfgSmiCmdPortAddr UINT16 ? ; I/O base address of ACPI SMI Command Block
+ CfgAcpiPmaCntBlkAddr UINT16 ? ; I/O base address of ACPI power management additional control block
+ CfgGecShadowRomBase UINT32 ? ; 32-bit base address to the GEC shadow ROM
+ CfgWatchDogTimerBase UINT32 ? ; Watchdog Timer base address
+ CfgSpiRomBaseAddress UINT32 ? ; Base address for the SPI ROM controller
+ CfgHpetBaseAddress UINT32 ? ; HPET MMIO base address
+ CfgAzaliaSsid UINT32 ? ; Subsystem ID of HD Audio controller
+ CfgSmbusSsid UINT32 ? ; Subsystem ID of SMBUS controller
+ CfgIdeSsid UINT32 ? ; Subsystem ID of IDE controller
+ CfgSataAhciSsid UINT32 ? ; Subsystem ID of SATA controller in AHCI mode
+ CfgSataIdeSsid UINT32 ? ; Subsystem ID of SATA controller in IDE mode
+ CfgSataRaid5Ssid UINT32 ? ; Subsystem ID of SATA controller in RAID5 mode
+ CfgSataRaidSsid UINT32 ? ; Subsystem ID of SATA controller in RAID mode
+ CfgEhciSsid UINT32 ? ; Subsystem ID of EHCI
+ CfgOhciSsid UINT32 ? ; Subsystem ID of OHCI
+ CfgLpcSsid UINT32 ? ; Subsystem ID of LPC ISA Bridge
+ CfgSdSsid UINT32 ? ; Subsystem ID of SecureDigital controller
+ CfgXhciSsid UINT32 ? ; Subsystem ID of XHCI
+ CfgFchPort80BehindPcib BOOLEAN ? ; Is port80 cycle going to the PCI bridge
+ CfgFchEnableAcpiSleepTrap BOOLEAN ? ; ACPI sleep SMI enable/disable
+ CfgFchGppLinkConfig GPP_LINKMODE ? ; FCH GPP link configuration
+ CfgFchGppPort0Present BOOLEAN ? ; Is FCH GPP port 0 present
+ CfgFchGppPort1Present BOOLEAN ? ; Is FCH GPP port 1 present
+ CfgFchGppPort2Present BOOLEAN ? ; Is FCH GPP port 2 present
+ CfgFchGppPort3Present BOOLEAN ? ; Is FCH GPP port 3 present
+ CfgFchGppPort0HotPlug BOOLEAN ? ; Is FCH GPP port 0 hotplug capable
+ CfgFchGppPort1HotPlug BOOLEAN ? ; Is FCH GPP port 1 hotplug capable
+ CfgFchGppPort2HotPlug BOOLEAN ? ; Is FCH GPP port 2 hotplug capable
+ CfgFchGppPort3HotPlug BOOLEAN ? ; Is FCH GPP port 3 hotplug capable
+
+ CfgFchEsataPortBitMap UINT8 ? ; ESATA Port definition, eg: [0]=1, means port 0 is ESATA capable
+ CfgFchIrPinControl UINT8 ? ; Register bitfield describing Infrared Pin Control:
+ CfgFchSdClockControl SD_CLOCK_CONTROL ? ; FCH SD Clock Control
+ CfgFchSciMapControl POINTER ? ; FCH SCI Mapping Control
+ CfgFchSataPhyControl POINTER ? ; FCH SATA PHY Control
+ CfgFchGpioControl POINTER ? ; FCH GPIO Control
+FCH_PLATFORM_POLICY ENDS
+
+
+; Build Option/Configuration Boolean Structure
+BUILD_OPT_CFG STRUCT
+ ; Build Option Area
+ VersionString AMD_CODE_HEADER {} ; < AMD embedded code version string
+ OptionUDimms BOOLEAN ? ; < UDIMMS
+ OptionRDimms BOOLEAN ? ; < RDIMMS
+ OptionLrDimms BOOLEAN ? ; < LRDIMMS
+ OptionEcc BOOLEAN ? ; < ECC
+ OptionBankInterleave BOOLEAN ? ; < BANK_INTERLEAVE
+ OptionDctInterleave BOOLEAN ? ; < DCT_INTERLEAVE
+ OptionNodeInterleave BOOLEAN ? ; < NODE_INTERLEAVE
+ OptionParallelTraining BOOLEAN ? ; < PARALLEL_TRAINING
+ OptionOnlineSpare BOOLEAN ? ; < ONLINE_SPARE
+ OptionMemRestore BOOLEAN ? ; < MEM CONTEXT RESTORE
+ OptionMultisocket BOOLEAN ? ; < MULTISOCKET
+ OptionAcpiPstates BOOLEAN ? ; < ACPI_PSTATES
+ OptionPStatesInHpcMode BOOLEAN ? ; < PSTATES_HPC_MODE
+ OptionCrat BOOLEAN ? ; < CRAT
+ OptionCdit BOOLEAN ? ; < CDIT
+ OptionSrat BOOLEAN ? ; < SRAT
+ OptionSlit BOOLEAN ? ; < SLIT
+ OptionWhea BOOLEAN ? ; < WHEA
+ OptionDmi BOOLEAN ? ; < DMI
+ OptionEarlySamples BOOLEAN ? ; < EARLY_SAMPLES
+ OptionAddrToCsTranslator BOOLEAN ? ; < ADDR_TO_CS_TRANSLATOR
+
+ ; Build Configuration Area
+ CfgPciMmioAddress UINT64 ? ; < PciMmioBase
+ CfgPciMmioSize UINT32 ? ; < PciMmioSize
+ CfgPlatVrmCfg PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules.
+ CfgPlatNumIoApics UINT32 ? ; < PlatformApicIoNumber
+ CfgMemInitPstate UINT32 ? ; < MemoryInitPstate
+ CfgPlatformC1eMode PLATFORM_C1E_MODES ? ; < PlatformC1eMode
+ CfgPlatformC1eOpData UINT32 ? ; < PlatformC1eOpData
+ CfgPlatformC1eOpData1 UINT32 ? ; < PlatformC1eOpData1
+ CfgPlatformC1eOpData2 UINT32 ? ; < PlatformC1eOpData2
+ CfgPlatformC1eOpData3 UINT32 ? ; < PlatformC1eOpData3
+ CfgPlatformCStateMode PLATFORM_CSTATE_MODES ? ; < PlatformCStateMode
+ CfgPlatformCStateOpData UINT32 ? ; < PlatformCStateOpData
+ CfgPlatformCStateIoBaseAddress UINT16 ? ; < PlatformCStateIoBaseAddress
+ CfgPlatformCpbMode PLATFORM_CPB_MODES ? ; < PlatformCpbMode
+ CfgLowPowerPstateForProcHot PLATFORM_LOW_POWER_PSTATE_MODES ? ; < Low power Pstate for PROCHOT mode
+ CfgCoreLevelingMode UINT32 ? ; < CoreLevelingCofig
+ CfgPerformanceProfile PERFORMANCE_PROFILE {} ; < The platform's control flow mode and platform performance settings.
+ CfgPlatformDeemphasisList POINTER ? ; < HT Deemphasis
+ CfgAmdPlatformType UINT32 ? ; < AmdPlatformType
+ CfgAmdPowerCeiling UINT32 ? ; < PowerCeiling, specifies a maximum power usage limit for the platform
+ CfgHtcTemperatureLimit UINT16 ? ; < Hardware Thermal Control temperature limit in tenths of degrees Celsius.
+ CfgLhtcTemperatureLimit UINT16 ? ; < Local Hardware Thermal Control temperature limit in tenths of degrees Celsius.
+
+ CfgMemoryBusFrequencyLimit UINT32 ? ; < Memory Bus Frequency Limit
+ CfgMemoryModeUnganged BOOLEAN ? ; < Memory Mode Unganged
+ CfgMemoryQuadRankCapable BOOLEAN ? ; < Memory Quad Rank Capable
+ CfgMemoryQuadrankType UINT32 ? ; < Memory Quadrank Type
+ CfgMemoryRDimmCapable BOOLEAN ? ; < Memory RDIMM Capable
+ CfgMemoryLRDimmCapable BOOLEAN ? ; < Memory LRDIMM Capable
+ CfgMemoryUDimmCapable BOOLEAN ? ; < Memory UDIMM Capable
+ CfgMemorySODimmCapable BOOLEAN ? ; < Memory SODimm Capable
+ CfgLimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1TB
+ CfgMemoryEnableBankInterleaving BOOLEAN ? ; < Memory Enable Bank Interleaving
+ CfgMemoryEnableNodeInterleaving BOOLEAN ? ; < Memory Enable Node Interleaving
+ CfgMemoryChannelInterleaving BOOLEAN ? ; < Memory Channel Interleaving
+ CfgMemoryPowerDown BOOLEAN ? ; < Memory Power Down
+ CfgPowerDownMode UINT32 ? ; < Power Down Mode
+ CfgOnlineSpare BOOLEAN ? ; < Online Spare
+ CfgMemoryParityEnable BOOLEAN ? ; < Memory Parity Enable
+ CfgBankSwizzle BOOLEAN ? ; < Bank Swizzle
+ CfgTimingModeSelect UINT32 ? ; < Timing Mode Select
+ CfgMemoryClockSelect UINT32 ? ; < Memory Clock Select
+ CfgDqsTrainingControl BOOLEAN ? ; < Dqs Training Control
+ CfgIgnoreSpdChecksum BOOLEAN ? ; < Ignore Spd Checksum
+ CfgUseBurstMode BOOLEAN ? ; < Use Burst Mode
+ CfgMemoryAllClocksOn BOOLEAN ? ; < Memory All Clocks On
+ CfgEnableEccFeature BOOLEAN ? ; < Enable ECC Feature
+ CfgEccRedirection BOOLEAN ? ; < ECC Redirection
+ CfgScrubDramRate UINT16 ? ; < Scrub Dram Rate
+ CfgScrubL2Rate UINT16 ? ; < Scrub L2Rate
+ CfgScrubL3Rate UINT16 ? ; < Scrub L3Rate
+ CfgScrubIcRate UINT16 ? ; < Scrub Ic Rate
+ CfgScrubDcRate UINT16 ? ; < Scrub Dc Rate
+ CfgEccSyncFlood BOOLEAN ? ; < ECC Sync Flood
+ CfgEccSymbolSize UINT16 ? ; < ECC Symbol Size
+ CfgHeapDramAddress UINT64 ? ; < Heap contents will be temporarily stored in this address during the transition
+ CfgNodeMem1GBAlign BOOLEAN ? ; < Node Mem 1GB boundary Alignment
+ CfgS3LateRestore BOOLEAN ? ; < S3 Late Restore
+ CfgAcpiPstateIndependent BOOLEAN ? ; < PSD method dependent/Independent
+ CfgAcpiPstatesPsdPolicy UINT32 ? ; < PSD policy
+ CfgApMtrrSettingsList POINTER ? ; < The AP's MTRR settings before final halt
+ CfgUmaMode UMA_MODE ? ; < Uma Mode
+ CfgUmaSize UINT32 ? ; < Uma Size [31:0]=Addr[47:16]
+ CfgUmaAbove4G BOOLEAN ? ; < Uma Above 4G Support
+ CfgUmaAlignment UMA_ALIGNMENT ? ; < Uma alignment
+ CfgProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope
+ CfgProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name.
+ CfgProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name.
+ CfgGnbHdAudio UINT8 ? ; < Gnb HD Audio Enable
+ CfgAbmSupport UINT8 ? ; < ABM support
+ CfgDynamicRefreshRate UINT8 ? ; < Dynamic refresh rate
+ CfgLcdBackLightControl UINT16 ? ; < Lcd back light control
+ CfgGnb3dStereoPinIndex UINT8 ? ; < 3D Stereo Pin ID
+ CfgTempPcieMmioBaseAddress UINT32 ? ; < Temp pcie MMIO base address
+ CfgGnbIGPUSSID UINT32 ? ; < Gnb internal GPU SSID
+ CfgGnbHDAudioSSID UINT32 ? ; < Gnb HD Audio SSID
+ CfgGnbPcieSSID UINT32 ? ; < Gnb PCIe SSID
+ CfgLvdsSpreadSpectrum UINT16 ? ; < Lvds Spread Spectrum. Build-time customizable only
+ CfgLvdsSpreadSpectrumRate UINT16 ? ; < Lvds Spread Spectrum Rate. Build-time customizable only
+ FchBldCfg POINTER ? ; < FCH platform build configuration policy
+ CfgIommuSupport BOOLEAN ? ; IOMMU support
+ CfgLvdsPowerOnSeqDigonToDe UINT8 ? ; Panel initialization timing
+ CfgLvdsPowerOnSeqDeToVaryBl UINT8 ? ; Panel initialization timing
+ CfgLvdsPowerOnSeqDeToDigon UINT8 ? ; Panel initialization timing
+ CfgLvdsPowerOnSeqVaryBlToDe UINT8 ? ; Panel initialization timing
+ CfgLvdsPowerOnSeqOnToOffDelay UINT8 ? ; Panel initialization timing
+ CfgLvdsPowerOnSeqVaryBlToBlon UINT8 ? ; Panel initialization timing
+ CfgLvdsPowerOnSeqBlonToVaryBl UINT8 ? ; Panel initialization timing
+ CfgLvdsMaxPixelClockFreq UINT16 ? ; The maximum pixel clock frequency supported
+ CfgLcdBitDepthControlValue UINT32 ? ; The LCD bit depth control settings
+ CfgLvds24bbpPanelMode UINT8 ? ; The LVDS 24 BBP mode
+ CfgLvdsMiscControl LVDS_MISC_CONTROL {}; THe LVDS Misc control
+ CfgPcieRefClkSpreadSpectrum UINT16 ? ; PCIe Reference Clock Spread Spectrum
+ CfgExternalVrefCtlFeature BOOLEAN ? ; External Vref control
+ CfgForceTrainMode FORCE_TRAIN_MODE ? ; < Force Train Mode
+ CfgGnbRemoteDisplaySupport BOOLEAN ? ; Wireless Display Support
+ CfgIvrsExclusionRangeList POINTER ? ; IOMMU Exclusion Range List
+ CfgGnbSyncFloodPinAsNmi BOOLEAN ? ; Define function of NMI_SYNCFLOOD as NMI
+ CfgIgpuEnableDisablePolicy UINT8 ? ; This item defines the iGPU Enable/Disable policy
+ CfgGnbSwTjOffset UINT8 ? ; Software-writeable TjOffset
+ CfgLvdsMiscVoltAdjustment UINT8 ? ; Register LVDS_CTRL_4 to adjust LVDS output voltage
+ CfgDisplayMiscControl DISPLAY_MISC_CONTROL {}; The Display Misc control
+ CfgDpFixedVoltSwingType DP_FIXED_VOLT_SWING_TYPE ? ;To indicate fixed voltage swing value
+ CfgDimmTypeUsedInMixedConfig TECHNOLOGY_TYPE ? ; Select the preferred technology type that AGESA will enable
+ ; when it is mixed with other technology types.
+ CfgHybridBoostEnable BOOLEAN ? ; HyBrid Boost support
+ CfgGnbIoapicAddress UINT64 ? ; GNB IOAPIC Base Address(NULL if platform configured)
+ CfgDataEyeEn BOOLEAN ? ; Enable get 2D data eye
+ CfgDockedTdpHeadroom BOOLEAN ? ; Configure Docked Tdp Headroom.
+ CfgDramDoubleRefreshRateEn BOOLEAN ? ; Double DRAM refresh rate
+ Reserved BOOLEAN ? ; < reserved...
+BUILD_OPT_CFG ENDS
+
+ ; A structure containing platform specific operational characteristics. This
+ ; structure is initially populated by the initializer with a copy of the same
+ ; structure that was created at build time using the build configuration controls.
+PLATFORM_CONFIGURATION STRUCT
+ PlatformProfile PERFORMANCE_PROFILE {} ; < Several configuration settings for the processor.
+ PlatformDeemphasisList POINTER ? ; < Deemphasis levels for the platform's HT links.
+ CoreLevelingMode UINT8 ? ; < Indicates how to balance the number of cores per processor.
+ C1eMode PLATFORM_C1E_MODES ? ; < Specifies the method of C1e enablement - Disabled, HW, or message based.
+ C1ePlatformData UINT32 ? ; < If C1eMode is HW, specifies the P_LVL3 I/O port of the platform.
+ C1ePlatformData1 UINT32 ? ; < If C1eMode is SW, specifies the address of chipset's SMI command port.
+ C1ePlatformData2 UINT32 ? ; < If C1eMode is SW, specifies the unique number used by the SMI handler to identify SMI source.
+ C1ePlatformData3 UINT32 ? ; < If C1eMode is Auto, specifies the P_LVL3 I/O port of the platform for HW C1e
+ CStateMode PLATFORM_CSTATE_MODES ? ; < Specifies the method of C-State enablement - Disabled, or C6.
+ CStatePlatformData UINT32 ? ; < This element specifies some pertinent data needed for the operation of the Cstate feature
+ ; < If CStateMode is CStateModeC6, this item is reserved
+ CStateIoBaseAddress UINT16 ? ; < This item specifies a free block of 8 consecutive bytes of I/O ports that
+ ; < can be used to allow the CPU to enter Cstates.
+ CpbMode PLATFORM_CPB_MODES ? ; < Specifies the method of core performance boost enablement - Disabled, or Auto.
+ UserOptionDmi BOOLEAN ? ; < When set to TRUE, the DMI data table is generated.
+ UserOptionPState BOOLEAN ? ; < When set to TRUE, the PState data tables are generated.
+ UserOptionCrat BOOLEAN ? ; < When set to TRUE, the CRAT data table is generated.
+ UserOptionCdit BOOLEAN ? ; < When set to TRUE, the CDIT data table is generated.
+ UserOptionSrat BOOLEAN ? ; < When set to TRUE, the SRAT data table is generated.
+ UserOptionSlit BOOLEAN ? ; < When set to TRUE, the SLIT data table is generated.
+ UserOptionWhea BOOLEAN ? ; < When set to TRUE, the WHEA data table is generated.
+ LowPowerPstateForProcHot PLATFORM_LOW_POWER_PSTATE_MODES ? ; < Specifies the method of low power Pstate for PROCHOT enablement - Disabled, or Auto.
+ PowerCeiling UINT32 ? ; < P-State Ceiling Enabling Deck - Max power milli-watts.
+ ForcePstateIndependent BOOLEAN ? ; < Deprecated in favor of PstatesPsdPolicy.
+ ; < P-State _PSD is forced independent.
+ PstatesPsdPolicy UINT32 ? ; < P-State _PSD policy
+ PStatesInHpcMode BOOLEAN ? ; < High performance computing (HPC) mode
+ NumberOfIoApics UINT32 ? ; < Number of I/O APICs in the system
+ VrmProperties PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules.
+ ProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope
+ ProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name.
+ ProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name.
+ GnbHdAudio UINT8 ? ; < Control GFX HD Audio controller(Used for HDMI and DP display output),
+ ; < essentially it enables function 1 of graphics device.
+ ; < @li 0 = HD Audio disable
+ ; < @li 1 = HD Audio enable
+ AbmSupport UINT8 ? ; < Automatic adjust LVDS/eDP Back light level support.It is
+ ; < characteristic specific to display panel which used by platform design.
+ ; < @li 0 = ABM support disabled
+ ; < @li 1 = ABM support enabled
+ DynamicRefreshRate UINT8 ? ; < Adjust refresh rate on LVDS/eDP.
+ LcdBackLightControl UINT16 ? ; < The PWM frequency to LCD backlight control.
+ ; < If equal to 0 backlight not controlled by iGPU.
+ HtcTemperatureLimit UINT16 ? ; < The Hardware Thermal Control temperature limit in tenths of degrees Celsius.
+ ; < If equal to 0, use hardware defaults.
+ LhtcTemperatureLimit UINT16 ? ; < The Local Hardware Thermal Control temperature limit in tenths of degrees Celsius.
+ ; < If equal to 0, use hardware defaults.
+PLATFORM_CONFIGURATION ENDS
+
+
+; *********************************************************************
+; * Structures for: AmdInitLate
+; *********************************************************************
+ PROC_VERSION_LENGTH EQU 48
+ MAX_DIMMS_PER_SOCKET EQU 16
+ PROC_MANU_LENGTH EQU 29
+
+ ; Interface Parameter Structures
+ ; DMI Type4 - Processor ID
+TYPE4_PROC_ID STRUCT
+ ProcIdLsd UINT32 ? ; < Lower half of 64b ID
+ ProcIdMsd UINT32 ? ; < Upper half of 64b ID
+TYPE4_PROC_ID ENDS
+
+ ; DMI Type 4 - Processor information
+TYPE4_DMI_INFO STRUCT
+ T4ProcType UINT8 ? ; < CPU Type
+ T4ProcFamily UINT8 ? ; < Family 1
+ T4ProcId TYPE4_PROC_ID {} ; < Id
+ T4Voltage UINT8 ? ; < Voltage
+ T4ExternalClock UINT16 ? ; < External clock
+ T4MaxSpeed UINT16 ? ; < Max speed
+ T4CurrentSpeed UINT16 ? ; < Current speed
+ T4Status UINT8 ? ; < Status
+ T4ProcUpgrade UINT8 ? ; < Up grade
+ T4CoreCount UINT8 ? ; < Core count
+ T4CoreEnabled UINT8 ? ; < Core Enable
+ T4ThreadCount UINT8 ? ; < Thread count
+ T4ProcCharacteristics UINT16 ? ; < Characteristics
+ T4ProcFamily2 UINT16 ? ; < Family 2
+ T4ProcVersion CHAR8 (PROC_VERSION_LENGTH) DUP (?) ; < Cpu version
+ T4ProcManufacturer CHAR8 (PROC_MANU_LENGTH) DUP (?) ; < Manufacturer
+TYPE4_DMI_INFO ENDS
+
+ ; DMI Type 7 - Cache information
+TYPE7_DMI_INFO STRUCT
+ T7CacheCfg UINT16 ? ; < Cache cfg
+ T7MaxCacheSize UINT16 ? ; < Max size
+ T7InstallSize UINT16 ? ; < Install size
+ T7SupportedSramType UINT16 ? ; < Supported Sram Type
+ T7CurrentSramType UINT16 ? ; < Current type
+ T7CacheSpeed UINT8 ? ; < Speed
+ T7ErrorCorrectionType UINT8 ? ; < ECC type
+ T7SystemCacheType UINT8 ? ; < Cache type
+ T7Associativity UINT8 ? ; < Associativity
+TYPE7_DMI_INFO ENDS
+
+ ; DMI Type 16 offset 04h - Location
+
+ OtherLocation EQU 01h ; < Assign 01 to Other
+ UnknownLocation EQU 2 ; < Assign 02 to Unknown
+ SystemboardOrMotherboard EQU 3 ; < Assign 03 to systemboard or motherboard
+ IsaAddonCard EQU 4 ; < Assign 04 to ISA add-on card
+ EisaAddonCard EQU 5 ; < Assign 05 to EISA add-on card
+ PciAddonCard EQU 6 ; < Assign 06 to PCI add-on card
+ McaAddonCard EQU 7 ; < Assign 07 to MCA add-on card
+ PcmciaAddonCard EQU 8 ; < Assign 08 to PCMCIA add-on card
+ ProprietaryAddonCard EQU 9 ; < Assign 09 to proprietary add-on card
+ NuBus EQU 10 ; < Assign 0A to NuBus
+ Pc98C20AddonCard EQU 11 ; < Assign 0A0 to PC-98/C20 add-on card
+ Pc98C24AddonCard EQU 12 ; < Assign 0A1 to PC-98/C24 add-on card
+ Pc98EAddoncard EQU 13 ; < Assign 0A2 to PC-98/E add-on card
+ Pc98LocalBusAddonCard EQU 14 ; < Assign 0A3 to PC-98/Local bus add-on card
+DMI_T16_LOCATION TEXTEQU <DWORD> ;} DMI_T16_LOCATION;
+
+ ; DMI Type 16 offset 05h - Memory Error Correction
+
+ OtherUse EQU 01h ; < Assign 01 to Other
+ UnknownUse EQU 2 ; < Assign 02 to Unknown
+ SystemMemory EQU 3 ; < Assign 03 to system memory
+ VideoMemory EQU 4 ; < Assign 04 to video memory
+ FlashMemory EQU 5 ; < Assign 05 to flash memory
+ NonvolatileRam EQU 6 ; < Assign 06 to non-volatile RAM
+ CacheMemory EQU 7 ; < Assign 07 to cache memory
+DMI_T16_USE TEXTEQU <DWORD> ;} DMI_T16_USE;
+
+ ; DMI Type 16 offset 07h - Maximum Capacity
+
+ Dmi16OtherErrCorrection EQU 01h ; < Assign 01 to Other
+ Dmi16UnknownErrCorrection EQU 2 ; < Assign 02 to Unknown
+ Dmi16NoneErrCorrection EQU 3 ; < Assign 03 to None
+ Dmi16Parity EQU 4 ; < Assign 04 to parity
+ Dmi16SingleBitEcc EQU 5 ; < Assign 05 to Single-bit ECC
+ Dmi16MultiBitEcc EQU 6 ; < Assign 06 to Multi-bit ECC
+ Dmi16Crc EQU 7 ; < Assign 07 to CRC
+DMI_T16_ERROR_CORRECTION TEXTEQU <DWORD> ;} DMI_T16_ERROR_CORRECTION;
+
+ ; DMI Type 16 - Physical Memory Array
+TYPE16_DMI_INFO STRUCT
+ Location DMI_T16_LOCATION ? ; < The physical location of the Memory Array,
+ ; < whether on the system board or an add-in board.
+ Use DMI_T16_USE ? ; < Identifies the function for which the array
+ ; < is used.
+ MemoryErrorCorrection DMI_T16_ERROR_CORRECTION ? ; < The primary hardware error correction or
+ ; < detection method supported by this memory array.
+ MaximumCapacity UINT32 ? ; < The maximum memory capacity, in kilobytes,
+ ; < for the array.
+ NumberOfMemoryDevices UINT16 ? ; < The number of slots or sockets available
+ ; < for memory devices in this array.
+ ExtMaxCapacity UINT64 ? ; < The maximum memory capacity, in bytes,
+ ; < for this array.
+TYPE16_DMI_INFO ENDS
+
+ ; DMI Type 17 offset 0Eh - Form Factor
+ OtherFormFactor EQU 01h ; < Assign 01 to Other
+ UnknowFormFactor EQU 2 ; < Assign 02 to Unknown
+ SimmFormFactor EQU 3 ; < Assign 03 to SIMM
+ SipFormFactor EQU 4 ; < Assign 04 to SIP
+ ChipFormFactor EQU 5 ; < Assign 05 to Chip
+ DipFormFactor EQU 6 ; < Assign 06 to DIP
+ ZipFormFactor EQU 7 ; < Assign 07 to ZIP
+ ProprietaryCardFormFactor EQU 8 ; < Assign 08 to Proprietary Card
+ DimmFormFactorFormFactor EQU 9 ; < Assign 09 to DIMM
+ TsopFormFactor EQU 10 ; < Assign 10 to TSOP
+ RowOfChipsFormFactor EQU 11 ; < Assign 11 to Row of chips
+ RimmFormFactor EQU 12 ; < Assign 12 to RIMM
+ SodimmFormFactor EQU 13 ; < Assign 13 to SODIMM
+ SrimmFormFactor EQU 14 ; < Assign 14 to SRIMM
+ FbDimmFormFactor EQU 15 ; < Assign 15 to FB-DIMM
+DMI_T17_FORM_FACTOR TEXTEQU <DWORD>
+
+ ; DMI Type 17 offset 12h - Memory Type
+ OtherMemType EQU 01h ; < Assign 01 to Other
+ UnknownMemType EQU 2 ; < Assign 02 to Unknown
+ DramMemType EQU 3 ; < Assign 03 to DRAM
+ EdramMemType EQU 4 ; < Assign 04 to EDRAM
+ VramMemType EQU 5 ; < Assign 05 to VRAM
+ SramMemType EQU 6 ; < Assign 06 to SRAM
+ RamMemType EQU 7 ; < Assign 07 to RAM
+ RomMemType EQU 8 ; < Assign 08 to ROM
+ FlashMemType EQU 9 ; < Assign 09 to Flash
+ EepromMemType EQU 10 ; < Assign 10 to EEPROM
+ FepromMemType EQU 11 ; < Assign 11 to FEPROM
+ EpromMemType EQU 12 ; < Assign 12 to EPROM
+ CdramMemType EQU 13 ; < Assign 13 to CDRAM
+ ThreeDramMemType EQU 14 ; < Assign 14 to 3DRAM
+ SdramMemType EQU 15 ; < Assign 15 to SDRAM
+ SgramMemType EQU 16 ; < Assign 16 to SGRAM
+ RdramMemType EQU 17 ; < Assign 17 to RDRAM
+ DdrMemType EQU 18 ; < Assign 18 to DDR
+ Ddr2MemType EQU 19 ; < Assign 19 to DDR2
+ Ddr2FbdimmMemType EQU 20 ; < Assign 20 to DDR2 FB-DIMM
+ Ddr3MemType EQU 24 ; < Assign 24 to DDR3
+ Fbd2MemType EQU 25 ; < Assign 25 to FBD2
+DMI_T17_MEMORY_TYPE TEXTEQU <DWORD>
+
+ ; DMI Type 17 offset 13h - Type Detail
+DMI_T17_TYPE_DETAIL STRUCT
+ Reserved1 UINT16 ?
+; OUT UINT16 Reserved1:1; ; < Reserved
+; OUT UINT16 Other:1; ; < Other
+; OUT UINT16 Unknown:1; ; < Unknown
+; OUT UINT16 FastPaged:1; ; < Fast-Paged
+; OUT UINT16 StaticColumn:1; ; < Static column
+; OUT UINT16 PseudoStatic:1; ; < Pseudo-static
+; OUT UINT16 Rambus:1; ; < RAMBUS
+; OUT UINT16 Synchronous:1; ; < Synchronous
+; OUT UINT16 Cmos:1; ; < CMOS
+; OUT UINT16 Edo:1; ; < EDO
+; OUT UINT16 WindowDram:1; ; < Window DRAM
+; OUT UINT16 CacheDram:1; ; < Cache Dram
+; OUT UINT16 NonVolatile:1; ; < Non-volatile
+; OUT UINT16 Registered:1; ; < Registered (Buffered)
+; OUT UINT16 Unbuffered:1; ; < Unbuffered (Unregistered)
+; OUT UINT16 Reserved2:1; ; < Reserved
+DMI_T17_TYPE_DETAIL ENDS
+
+ ; DMI Type 17 - Memory Device
+TYPE17_DMI_INFO STRUCT
+ Handle UINT16 ? ; < The temporary handle, or instance number, associated with the structure
+ TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits.
+ DataWidth UINT16 ? ; < Data Width, in bits, of this memory device.
+ MemorySize UINT16 ? ; < The size of the memory device.
+ FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device.
+ DeviceSet UINT8 ? ; < Identifies when the Memory Device is one of a set of
+ ; < Memory Devices that must be populated with all devices of
+ ; < the same type and size, and the set to which this device belongs.
+ DeviceLocator CHAR8 (8) DUP (?) ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located.
+ BankLocator CHAR8 (10) DUP (?) ; < The string number of the string that identifies the physically labeled bank where the memory device is located.
+ MemoryType DMI_T17_MEMORY_TYPE ? ; < The type of memory used in this device.
+ TypeDetail DMI_T17_TYPE_DETAIL {} ; < Additional detail on the memory device type
+ Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz).
+ ManufacturerIdCode UINT64 ? ; < Manufacturer ID code.
+ SerialNumber CHAR8 (9) DUP (?) ; < Serial Number.
+ PartNumber CHAR8 (19) DUP (?) ; < Part Number.
+ Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank.
+ ExtSize UINT32 ? ; < Extended Size.
+ ConfigSpeed UINT16 ? ; < Configured memory clock speed
+TYPE17_DMI_INFO ENDS
+
+ ; Memory DMI Type 17 - for memory use
+MEM_DMI_PHYSICAL_DIMM_INFO STRUCT
+ Socket UINT8 ?
+; OUT UINT8 Socket:3 ; < Socket ID
+; OUT UINT8 Channel:2 ; < Channel ID
+; OUT UINT8 Dimm:2 ; < DIMM ID
+; OUT UINT8 DimmPresent:1 ; < Dimm Present
+ Handle UINT16 ? ; < The temporary handle, or instance number, associated with the structure
+ TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits.
+ DataWidth UINT16 ? ; < Data Width, in bits, of this memory device.
+ MemorySize UINT16 ? ; < The size of the memory device.
+ FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device.
+ DeviceLocator UINT8 ? ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located.
+ BankLocator UINT8 ? ; < The string number of the string that identifies the physically labeled bank where the memory device is located.
+ Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz).
+ ManufacturerIdCode UINT64 ? ; < Manufacturer ID code.
+ SerialNumber UINT8 (4) DUP (?) ; < Serial Number.
+ PartNumber UINT8 (18) DUP (?) ; < Part Number.
+ Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank.
+ ExtSize UINT32 ? ; < Extended Size.
+ ConfigSpeed UINT16 ? ; < Configured memory clock speed
+MEM_DMI_PHYSICAL_DIMM_INFO ENDS
+
+ ; Memory DMI Type 20 - for memory use
+MEM_DMI_LOGICAL_DIMM_INFO STRUCT
+ Socket UINT8 ?
+; OUT UINT8 Socket:3 ; < Socket ID
+; OUT UINT8 Channel:2 ; < Channel ID
+; OUT UINT8 Dimm:2 ; < DIMM ID
+; OUT UINT8 DimmPresent:1 ; < Dimm Present
+ StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range
+ ; < of memory mapped to the referenced Memory Device.
+ EndingAddr UINT32 ? ; < The handle, or instance number, associated with
+ ; < the Memory Device structure to which this address
+ ; < range is mapped.
+ MemoryDeviceHandle UINT16 ? ; < The handle, or instance number, associated with
+ ; < the Memory Device structure to which this address
+ ; < range is mapped.
+ ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of
+ ; < memory mapped to the referenced Memory Device.
+ ExtEndingAddr UINT64 ? ; < The physical ending address, in bytes, of the last of
+ ; < a range of addresses mapped to the referenced Memory Device.
+MEM_DMI_LOGICAL_DIMM_INFO ENDS
+
+ ; DMI Type 19 - Memory Array Mapped Address
+TYPE19_DMI_INFO STRUCT
+ StartingAddr UINT32 ? ; < The physical address, in kilobytes,
+ ; < of a range of memory mapped to the
+ ; < specified physical memory array.
+ EndingAddr UINT32 ? ; < The physical ending address of the
+ ; < last kilobyte of a range of addresses
+ ; < mapped to the specified physical memory array.
+ MemoryArrayHandle UINT16 ? ; < The handle, or instance number, associated
+ ; < with the physical memory array to which this
+ ; < address range is mapped.
+ PartitionWidth UINT8 ? ; < Identifies the number of memory devices that
+ ; < form a single row of memory for the address
+ ; < partition defined by this structure.
+ ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of
+ ; < memory mapped to the specified Physical Memory Array.
+ ExtEndingAddr UINT64 ? ; < The physical address, in bytes, of a range of
+ ; < memory mapped to the specified Physical Memory Array.
+TYPE19_DMI_INFO ENDS
+
+; DMI Type 20 - Memory Device Mapped Address
+TYPE20_DMI_INFO STRUCT
+ StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range
+ ; < of memory mapped to the referenced Memory Device.
+ EndingAddr UINT32 ? ; < The handle, or instance number, associated with
+ ; < the Memory Device structure to which this address
+ ; < range is mapped.
+ MemoryDeviceHandle UINT16 ? ; < The handle, or instance number, associated with
+ ; < the Memory Device structure to which this address
+ ; < range is mapped.
+ MemoryArrayMappedAddressHandle UINT16 ? ; < The handle, or instance number, associated
+ ; < with the Memory Array Mapped Address structure to
+ ; < which this device address range is mapped.
+ PartitionRowPosition UINT8 ? ; < Identifies the position of the referenced Memory
+ ; < Device in a row of the address partition.
+ InterleavePosition UINT8 ? ; < The position of the referenced Memory Device in
+ ; < an interleave.
+ InterleavedDataDepth UINT8 ? ; < The maximum number of consecutive rows from the
+ ; < referenced Memory Device that are accessed in a
+ ; < single interleaved transfer.
+ ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of
+ ; < memory mapped to the referenced Memory Device.
+ ExtEndingAddr UINT64 ? ; < The physical ending address, in bytes, of the last of
+ ; < a range of addresses mapped to the referenced Memory Device.
+TYPE20_DMI_INFO ENDS
+
+ ; Collection of pointers to the DMI records
+DMI_INFO STRUCT
+ T4 TYPE4_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 4 struc
+ T7L1 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 1
+ T7L2 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 2
+ T7L3 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 3
+ T16 TYPE16_DMI_INFO {} ; < Type 16 struc
+ T17 TYPE17_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 17 struc
+ T19 TYPE19_DMI_INFO {} ; < Type 19 struc
+ T20 TYPE20_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 20 struc
+DMI_INFO ENDS
+
+
+
+; *********************************************************************
+; * Interface call: AllocateExecutionCache
+; *********************************************************************
+ MAX_CACHE_REGIONS EQU 3
+
+ ; AllocateExecutionCache sub param structure for cached memory region
+EXECUTION_CACHE_REGION STRUCT
+ ExeCacheStartAddr UINT32 ? ; < Start address
+ ExeCacheSize UINT32 ? ; < Size
+EXECUTION_CACHE_REGION ENDS
+
+; *********************************************************************
+; * Interface call: AmdGetAvailableExeCacheSize
+; *********************************************************************
+ ; Get available Cache remain
+AMD_GET_EXE_SIZE_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard header
+ AvailableExeCacheSize UINT32 ? ; < Remain size
+AMD_GET_EXE_SIZE_PARAMS ENDS
+
+
+
+
+
+
+ ; Selection type for core leveling
+ CORE_LEVEL_LOWEST EQU 0 ; < Level to lowest common denominator
+ CORE_LEVEL_TWO EQU 1 ; < Level to 2 cores
+ CORE_LEVEL_POWER_OF_TWO EQU 2 ; < Level to 1,2,4 or 8
+ CORE_LEVEL_NONE EQU 3 ; < Do no leveling
+ CORE_LEVEL_COMPUTE_UNIT EQU 4 ; < Level cores to one core per compute unit
+ CORE_LEVEL_COMPUTE_UNIT_TWO EQU 5 ; < Level cores to two cores per compute unit
+ CORE_LEVEL_COMPUTE_UNIT_THREE EQU 6 ; < Level cores to three cores per compute unit
+ CORE_LEVEL_ONE EQU 7 ; < Level to 1 core
+ CORE_LEVEL_THREE EQU 8 ; < Level to 3 cores
+ CORE_LEVEL_FOUR EQU 9 ; < Level to 4 cores
+ CORE_LEVEL_FIVE EQU 10 ; < Level to 5 cores
+ CORE_LEVEL_SIX EQU 11 ; < Level to 6 cores
+ CORE_LEVEL_SEVEN EQU 12 ; < Level to 7 cores
+ CORE_LEVEL_EIGHT EQU 13 ; < Level to 8 cores
+ CORE_LEVEL_NINE EQU 14 ; < Level to 9 cores
+ CORE_LEVEL_TEN EQU 15 ; < Level to 10 cores
+ CORE_LEVEL_ELEVEN EQU 16 ; < Level to 11 cores
+ CORE_LEVEL_TWELVE EQU 17 ; < Level to 12 cores
+ CORE_LEVEL_THIRTEEN EQU 18 ; < Level to 13 cores
+ CORE_LEVEL_FOURTEEN EQU 19 ; < Level to 14 cores
+ CORE_LEVEL_FIFTEEN EQU 20 ; < Level to 15 cores
+ CoreLevelModeMax EQU 21 ; < Used for bounds checking
+CORE_LEVELING_TYPE TEXTEQU <DWORD>
+
+
+; ***********************************************************************
+; *
+; * AGESA Basic Level interface structure definition and function prototypes
+; *
+; **********************************************************************
+
+; *********************************************************************
+; * Interface call: AmdCreateStruct
+; *********************************************************************
+
+; *********************************************************************
+; * Interface call: AmdReleaseStruct
+; *********************************************************************
+
+; *********************************************************************
+; * Interface call: AmdInitReset
+; *********************************************************************
+ ; AmdInitReset param structure
+AMD_RESET_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard header
+ CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region
+ HtConfig AMD_HT_RESET_INTERFACE {} ; < The interface for Ht Recovery
+ FchInterface FCH_RESET_INTERFACE {} ; Interface for FCH configuration
+AMD_RESET_PARAMS ENDS
+
+; *********************************************************************
+; * Interface call: AmdInitEarly
+; *********************************************************************
+ ; InitEarly param structure
+
+ ; Provide defaults or customizations to each service performed in AmdInitEarly.
+
+AMD_EARLY_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < The standard header
+ CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < Execution Map Interface
+ PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics.
+ HtConfig AMD_HT_INTERFACE {} ; < HyperTransport Interface
+ GnbConfig GNB_CONFIGURATION {} ; < GNB configuration
+AMD_EARLY_PARAMS ENDS
+
+; *********************************************************************
+; * Interface call: AmdInitPost
+; *********************************************************************
+ ; AmdInitPost param structure
+AMD_POST_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard header
+ PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics.
+ MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param
+ GnbPostConfig GNB_POST_CONFIGURATION {}
+AMD_POST_PARAMS ENDS
+
+; *********************************************************************
+; * Interface call: AmdInitEnv
+; *********************************************************************
+ ; AmdInitEnv param structure
+AMD_ENV_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard header
+ PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics.
+ GnbEnvConfiguration GNB_ENV_CONFIGURATION {} ; < GNB configuration
+ FchInterface FCH_INTERFACE {} ; FCH configuration
+AMD_ENV_PARAMS ENDS
+
+; *********************************************************************
+; * Interface call: AmdInitMid
+; *********************************************************************
+ ; AmdInitMid param structure
+AMD_MID_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard header
+ PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics
+ GnbMidConfiguration GNB_MID_CONFIGURATION {} ; < GNB configuration
+ FchInterface FCH_INTERFACE {} ; FCH configuration
+AMD_MID_PARAMS ENDS
+
+; *********************************************************************
+; * Interface call: AmdInitLate
+; *********************************************************************
+ ; AmdInitLate param structure
+AMD_LATE_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard header
+ PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics.
+ IvrsExclusionRangeList POINTER ? ; < IVMD exclusion range descriptor
+ DmiTable POINTER ? ; < DMI Interface
+ AcpiPState POINTER ? ; < Acpi Pstate SSDT Table
+ AcpiSrat POINTER ? ; < SRAT Table
+ AcpiSlit POINTER ? ; < SLIT Table
+ AcpiWheaMce POINTER ? ; < WHEA MCE Table
+ AcpiWheaCmc POINTER ? ; < WHEA CMC Table
+ AcpiAlib POINTER ? ; < ALIB Table
+ AcpiIvrs POINTER ? ; < IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table
+ AcpiCrat POINTER ? ; < Component Resource Affinity Table table
+ AcpiCdit POINTER ? ; < Component Locality Distance Information table
+ GnbLateConfiguration GNB_LATE_CONFIGURATION {} ; < GNB configuration
+AMD_LATE_PARAMS ENDS
+
+; *********************************************************************
+; * Interface call: AmdInitRecovery
+; *********************************************************************
+ ; CPU Recovery Parameters
+AMD_CPU_RECOVERY_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard Header
+ PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics
+AMD_CPU_RECOVERY_PARAMS ENDS
+
+ ; AmdInitRecovery param structure
+AMD_RECOVERY_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard header
+ MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param
+ CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region. And the max cache region is 3
+ CpuRecoveryParams AMD_CPU_RECOVERY_PARAMS {} ; < Params for CPU related recovery init.
+AMD_RECOVERY_PARAMS ENDS
+
+
+; *********************************************************************
+; * Interface call: AmdInitResume
+; *********************************************************************
+ ; AmdInitResume param structure
+AMD_RESUME_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard header
+ PlatformConfig PLATFORM_CONFIGURATION {} ; < Platform operational characteristics
+ S3DataBlock AMD_S3_PARAMS {} ; < Save state data
+AMD_RESUME_PARAMS ENDS
+
+; *********************************************************************
+; * Interface call: AmdS3LateRestore
+; *********************************************************************
+ ; AmdS3LateRestore param structure
+AMD_S3LATE_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard header
+ PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics.
+ S3DataBlock AMD_S3_PARAMS {} ; < Save state data
+AMD_S3LATE_PARAMS ENDS
+
+; *********************************************************************
+; * Interface call: AmdS3Save
+; *********************************************************************
+ ; AmdS3Save param structure
+AMD_S3SAVE_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Standard header
+ PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics.
+ S3DataBlock AMD_S3_PARAMS {} ; < Standard header
+ FchInterface FCH_INTERFACE {} ; FCH configuration
+AMD_S3SAVE_PARAMS ENDS
+
+ ; General Services API
+
+
+; *********************************************************************
+; * Interface service call: AmdGetApicId
+; *********************************************************************
+ ; Request the APIC ID of a particular core.
+
+AMD_APIC_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services.
+ Socket UINT8 ? ; < The Core's Socket.
+ Core UINT8 ? ; < The Core id.
+ IsPresent BOOLEAN ? ; < The Core is present, and ApicAddress is valid.
+ ApicAddress UINT8 ? ; < The Core's APIC ID.
+AMD_APIC_PARAMS ENDS
+
+; *********************************************************************
+; * Interface service call: AmdGetPciAddress
+; *********************************************************************
+ ; Request the PCI Address of a Processor Module (that is, its Northbridge)
+
+AMD_GET_PCI_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services.
+ Socket UINT8 ? ; < The Processor's socket
+ Module UINT8 ? ; < The Module in that Processor
+ IsPresent BOOLEAN ? ; < The Core is present, and PciAddress is valid.
+ PciAddress PCI_ADDR {} ; < The Processor's PCI Config Space address (Function 0, Register 0)
+AMD_GET_PCI_PARAMS ENDS
+
+; *********************************************************************
+; * Interface service call: AmdIdentifyCore
+; *********************************************************************
+ ; Request the identity (Socket, Module, Core) of the current Processor Core
+
+AMD_IDENTIFY_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services.
+ Socket UINT8 ? ; < The current Core's Socket
+ Module UINT8 ? ; < The current Core's Processor Module
+ Core UINT8 ? ; < The current Core's core id.
+AMD_IDENTIFY_PARAMS ENDS
+
+; *********************************************************************
+; * Interface service call: AmdReadEventLog
+; *********************************************************************
+ ; An Event Log Entry.
+EVENT_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services.
+ EventClass UINT32 ? ; < The severity of this event, matches AGESA_STATUS.
+ EventInfo UINT32 ? ; < The unique event identifier, zero means "no event".
+ DataParam1 UINT32 ? ; < Data specific to the Event.
+ DataParam2 UINT32 ? ; < Data specific to the Event.
+ DataParam3 UINT32 ? ; < Data specific to the Event.
+ DataParam4 UINT32 ? ; < Data specific to the Event.
+EVENT_PARAMS ENDS
+
+; *********************************************************************
+; * Interface service call: AmdIdentifyDimm
+; *********************************************************************
+ ; Request the identity of dimm from system address
+
+AMD_IDENTIFY_DIMM STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services.
+ MemoryAddress UINT64 ? ; < System Address that needs to be translated to dimm identification.
+ SocketId UINT8 ? ; < The socket on which the targeted address locates.
+ MemChannelId UINT8 ? ; < The channel on which the targeted address locates.
+ DimmId UINT8 ? ; < The dimm on which the targeted address locates.
+AMD_IDENTIFY_DIMM ENDS
+
+; *********************************************************************
+; * Interface service call: AmdGet2DDataEye
+; *********************************************************************
+ ; Get 2D training data eye.
+ RD_DATAEYE EQU 0 ; < Request read 2D data eye training
+ WR_DATAEYE EQU 1 ; < Request write 2D data eye training
+
+AMD_GET_DATAEYE STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services.
+ PostParamsPtr POINTER ? ; < Post parameters structure.
+ SocketId UINT8 ? ; < The socket on which the targeted address locates.
+ MemChannelId UINT8 ? ; < The channel on which the targeted address locates.
+ DimmId UINT8 ? ; < The dimm on which the targeted address locates.
+ DataEyeType UINT8 ? ; < The data eye type of training read/write.
+ DataEyeBuffer POINTER ? ; < Buffer to store data eye.
+AMD_GET_DATAEYE ENDS
+
+ ; Data structure for the Mapping Item between Unified ID for IDS Setup Option
+ ; and the option value.
+
+IDS_NV_ITEM STRUCT
+ IdsNvId UINT16 ? ; < Unified ID for IDS Setup Option.
+ IdsNvValue UINT16 ? ; < The value of IDS Setup Option.
+IDS_NV_ITEM ENDS
+
+ ; Data Structure for IDS CallOut Function
+IDS_CALLOUT_STRUCT STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < The Standard Header for AGESA Service
+ IdsNvPtr POINTER ? ; < Memory Pointer of IDS NV Table
+ Reserved UINT32 ? ; < reserved
+IDS_CALLOUT_STRUCT ENDS
+
+ AGESA_IDS_DFT_VAL EQU 0FFFFh; < Default value of every uninitlized NV item, the action for it will be ignored
+ AGESA_IDS_NV_END EQU 0FFFFh; < Flag specify end of option structure
+; WARNING: Don't change the comment below, it used as signature for script
+; AGESA IDS NV ID Definitions
+ AGESA_IDS_EXT_ID_START EQU 0000h; < specify the start of external NV id
+
+ AGESA_IDS_NV_UCODE EQU 0001h; < Enable or disable microcode patching
+
+ AGESA_IDS_NV_TARGET_PSTATE EQU 0002h; < Set the P-state required to be activated
+ AGESA_IDS_NV_POSTPSTATE EQU 0003h; < Set the P-state required to be activated through POST
+
+ AGESA_IDS_NV_BANK_INTERLEAVE EQU 0004h; < Enable or disable Bank Interleave
+ AGESA_IDS_NV_CHANNEL_INTERLEAVE EQU 0005h; < Enable or disable Channel Interleave
+ AGESA_IDS_NV_NODE_INTERLEAVE EQU 0006h; < Enable or disable Node Interleave
+ AGESA_IDS_NV_MEMHOLE EQU 0007h; < Enables or disable memory hole
+
+ AGESA_IDS_NV_SCRUB_REDIRECTION EQU 0008h; < Enable or disable a write to dram with corrected data
+ AGESA_IDS_NV_DRAM_SCRUB EQU 0009h; < Set the rate of background scrubbing for DRAM
+ AGESA_IDS_NV_DCACHE_SCRUB EQU 000Ah; < Set the rate of background scrubbing for the DCache.
+ AGESA_IDS_NV_L2_SCRUB EQU 000Bh; < Set the rate of background scrubbing for the L2 cache
+ AGESA_IDS_NV_L3_SCRUB EQU 000Ch; < Set the rate of background scrubbing for the L3 cache
+ AGESA_IDS_NV_ICACHE_SCRUB EQU 000Dh; < Set the rate of background scrubbing for the Icache
+ AGESA_IDS_NV_SYNC_ON_ECC_ERROR EQU 000Eh; < Enable or disable the sync flood on un-correctable ECC error
+ AGESA_IDS_NV_ECC_SYMBOL_SIZE EQU 000Fh; < Set ECC symbol size
+
+ AGESA_IDS_NV_ALL_MEMCLKS EQU 0010h; < Enable or disable all memory clocks enable
+ AGESA_IDS_NV_DCT_GANGING_MODE EQU 0011h; < Set the Ganged mode
+ AGESA_IDS_NV_DRAM_BURST_LENGTH32 EQU 0012h; < Set the DRAM Burst Length 32
+ AGESA_IDS_NV_MEMORY_POWER_DOWN EQU 0013h; < Enable or disable Memory power down mode
+ AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE EQU 0014h; < Set the Memory power down mode
+ AGESA_IDS_NV_DLL_SHUT_DOWN EQU 0015h; < Enable or disable DLLShutdown
+ AGESA_IDS_NV_ONLINE_SPARE EQU 0016h; < Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap
+
+ AGESA_IDS_NV_HT_ASSIST EQU 0017h; < Enable or Disable HT Assist
+ AGESA_IDS_NV_ATMMODE EQU 0018h; < Enable or Disable ATM mode
+
+ AGESA_IDS_NV_HDTOUT EQU 0019h; < Enable or disable HDTOUT feature
+
+ AGESA_IDS_NV_HTLINKSOCKET EQU 001Ah; < HT Link Socket
+ AGESA_IDS_NV_HTLINKPORT EQU 001Bh; < HT Link Port
+ AGESA_IDS_NV_HTLINKFREQ EQU 001Ch; < HT Link Frequency
+ AGESA_IDS_NV_HTLINKWIDTHIN EQU 001Dh; < HT Link In Width
+ AGESA_IDS_NV_HTLINKWIDTHOUT EQU 001Eh; < HT Link Out Width
+
+ AGESA_IDS_NV_GNBHDAUDIOEN EQU 001Fh; < Enable or disable GNB HD Audio
+
+ AGESA_IDS_NV_CPB_EN EQU 0020h; < Core Performance Boost
+
+ AGESA_IDS_NV_HTC_EN EQU 0021h; < HTC Enable
+ AGESA_IDS_NV_HTC_OVERRIDE EQU 0022h; < HTC Override
+ AGESA_IDS_NV_HTC_PSTATE_LIMIT EQU 0023h; < HTC P-state limit select
+ AGESA_IDS_NV_HTC_TEMP_HYS EQU 0024h; < HTC Temperature Hysteresis
+ AGESA_IDS_NV_HTC_ACT_TEMP EQU 0025h; < HTC Activation Temp
+
+ AGESA_IDS_NV_POWER_POLICY EQU 0026h; < Select Platform Power Policy
+ AGESA_IDS_NV_DRAMCON EQU 0027h; < Specify the mode for controller initialization
+ AGESA_IDS_EXT_ID_END EQU 0028h; < specify the end of external NV ID
+
+ IDS_EX_NV_ID TEXTEQU <DWORD>
diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/amd.inc b/src/vendorcode/amd/agesa/f16kb/Legacy/amd.inc
new file mode 100644
index 0000000..9d2870b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Legacy/amd.inc
@@ -0,0 +1,462 @@
+; ****************************************************************************
+; *
+; * @file
+; *
+; * Agesa structures and definitions
+; *
+; * Contains AMD AGESA core interface
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project: AGESA
+; * @e sub-project: Include
+; * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+;
+; ****************************************************************************
+; *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; *
+; **************************************************************************
+
+
+UINT64 TEXTEQU <QWORD>
+UINT32 TEXTEQU <DWORD>
+UINT16 TEXTEQU <WORD>
+UINT8 TEXTEQU <BYTE>
+CHAR8 TEXTEQU <BYTE>
+BOOLEAN TEXTEQU <BYTE>
+POINTER TEXTEQU <DWORD>
+
+ ; AGESA Types and Definitions
+
+ AGESA_REVISION EQU "Arch2008"
+ AGESA_ID EQU "AGESA"
+
+ LAST_ENTRY EQU 0FFFFFFFFh
+ IMAGE_SIGNATURE EQU 'DMA$'
+ IOCF8 EQU 0CF8h
+ IOCFC EQU 0CFCh
+
+ ; The return status for all AGESA public services.
+
+ ; Services return the most severe status of any logged event. Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK
+ ; will have log entries with more detail.
+
+ AGESA_SUCCESS EQU 0 ; < The service completed normally. Info may be logged.
+ AGESA_UNSUPPORTED EQU 1 ; < The dispatcher or create struct had an unimplemented function requested.
+ ; < Not logged.
+ AGESA_BOUNDS_CHK EQU 2 ; < A dynamic parameter was out of range and the service was not provided.
+ ; < Example, memory address not installed, heap buffer handle not found.
+ ; < Not Logged.
+ ; AGESA_STATUS of greater severity (the ones below this line), always have a log entry available.
+ AGESA_ALERT EQU 3 ; < An observed condition, but no loss of function.
+ ; < See log. Example, HT CRC.
+ AGESA_WARNING EQU 4 ; < Possible or minor loss of function. See Log.
+ AGESA_ERROR EQU 5 ; < Significant loss of function, boot may be possible. See Log.
+ AGESA_CRITICAL EQU 6 ; < Continue boot only to notify user. See Log.
+ AGESA_FATAL EQU 7 ; < Halt booting. See Log.
+ AgesaStatusMax EQU 8 ; < Not a status, use for limit checking.
+AGESA_STATUS TEXTEQU <DWORD>
+
+; For checking whether a status is at or above the mandatory log level.
+AGESA_STATUS_LOG_LEVEL EQU AGESA_ALERT
+
+ CALLOUT_ENTRY TEXTEQU <POINTER>
+ IMAGE_ENTRY TEXTEQU <POINTER>
+ MODULE_ENTRY TEXTEQU <POINTER>
+
+; This allocation type is used by the AmdCreateStruct entry point
+ PreMemHeap EQU 0 ; < Create heap in cache.
+ PostMemDram EQU 1 ; < Create heap in memory.
+ ByHost EQU 2 ; < Create heap by Host.
+ALLOCATION_METHOD TEXTEQU <DWORD>
+
+ ; These width descriptors are used by the library function, and others, to specify the data size
+ AccessWidth8 EQU 1 ; < Access width is 8 bits.
+ AccessWidth16 EQU 2 ; < Access width is 16 bits.
+ AccessWidth32 EQU 3 ; < Access width is 32 bits.
+ AccessWidth64 EQU 4 ; < Access width is 64 bits.
+
+ AccessS3SaveWidth8 EQU 81h ; < Save 8 bits data.
+ AccessS3SaveWidth16 EQU 130 ; < Save 16 bits data.
+ AccessS3SaveWidth32 EQU 131 ; < Save 32 bits data.
+ AccessS3SaveWidth64 EQU 132 ; < Save 64 bits data.
+ACCESS_WIDTH TEXTEQU <DWORD>
+
+ ; AGESA struct name
+
+ ; AGESA BASIC FUNCTIONS
+ AMD_INIT_RECOVERY EQU 00020000h
+ AMD_CREATE_STRUCT EQU 00020001h
+ AMD_INIT_EARLY EQU 00020002h
+ AMD_INIT_ENV EQU 00020003h
+ AMD_INIT_LATE EQU 00020004h
+ AMD_INIT_MID EQU 00020005h
+ AMD_INIT_POST EQU 00020006h
+ AMD_INIT_RESET EQU 00020007h
+ AMD_INIT_RESUME EQU 00020008h
+ AMD_RELEASE_STRUCT EQU 00020009h
+ AMD_S3LATE_RESTORE EQU 0002000Ah
+ AMD_S3_SAVE EQU 0002000Bh
+ AMD_GET_APIC_ID EQU 0002000Ch
+ AMD_GET_PCI_ADDRESS EQU 0002000Dh
+ AMD_IDENTIFY_CORE EQU 0002000Eh
+ AMD_READ_EVENT_LOG EQU 0002000Fh
+ AMD_GET_EXECACHE_SIZE EQU 00020010h
+ AMD_LATE_RUN_AP_TASK EQU 00020011h
+ AMD_IDENTIFY_DIMMS EQU 00020012h
+ AMD_GET_2D_DATA_EYE EQU 00020013h
+AGESA_STRUCT_NAME TEXTEQU <DWORD>
+
+
+ ; ResetType constant values
+ WARM_RESET_WHENEVER EQU 1
+ COLD_RESET_WHENEVER EQU 2
+ WARM_RESET_IMMEDIATELY EQU 3
+ COLD_RESET_IMMEDIATELY EQU 4
+
+
+ ; AGESA Structures
+
+ ; The standard header for all AGESA services.
+AMD_CONFIG_PARAMS STRUCT
+ ImageBasePtr UINT32 ? ; < The AGESA Image base address.
+ Func UINT32 ? ; < The service desired, @sa dispatch.h.
+ AltImageBasePtr UINT32 ? ; < Alternate Image location
+ CalloutPtr CALLOUT_ENTRY ? ; < For Callout from AGESA
+ HeapStatus UINT8 ? ; < For heap status from boot time slide.
+ HeapBasePtr UINT64 ? ; < Location of the heap
+ Reserved UINT8 (7) DUP (?) ; < This space is reserved for future use.
+AMD_CONFIG_PARAMS ENDS
+
+
+ ; Create Struct Interface.
+AMD_INTERFACE_PARAMS STRUCT
+ StdHeader AMD_CONFIG_PARAMS {} ; < Config header
+ AgesaFunctionName AGESA_STRUCT_NAME ? ; < The service to init, @sa dispatch.h
+ AllocationMethod ALLOCATION_METHOD ? ; < How to handle buffer allocation
+ NewStructSize UINT32 ? ; < The size of the allocated data, in for ByHost, else out only.
+ NewStructPtr POINTER ? ; < The struct for the service.
+ ; < The struct to init for ByHost allocation,
+ ; < the initialized struct on return.
+AMD_INTERFACE_PARAMS ENDS
+
+ FUNC_0 EQU 0 ; bit-placed for PCI address creation
+ FUNC_1 EQU 1
+ FUNC_2 EQU 2
+ FUNC_3 EQU 3
+ FUNC_4 EQU 4
+ FUNC_5 EQU 5
+ FUNC_6 EQU 6
+ FUNC_7 EQU 7
+
+ ; AGESA Binary module header structure
+AMD_IMAGE_HEADER STRUCT
+ Signature UINT32 ? ; < Binary Signature
+ CreatorID CHAR8 (8) DUP (?) ; < 8 characters ID
+ Version CHAR8 (12) DUP (?) ; < 12 characters version
+ ModuleInfoOffset UINT32 ? ; < Offset of module
+ EntryPointAddress UINT32 ? ; < Entry address
+ ImageBase UINT32 ? ; < Image base
+ RelocTableOffset UINT32 ? ; < Relocate Table offset
+ ImageSize UINT32 ? ; < Size
+ Checksum UINT16 ? ; < Checksum
+ ImageType UINT8 ? ; < Type
+ V_Reserved UINT8 ? ; < Reserved
+AMD_IMAGE_HEADER ENDS
+ ; AGESA Binary module header structure
+AMD_MODULE_HEADER STRUCT
+ ModuleHeaderSignature UINT32 ? ; < Module signature
+ ModuleIdentifier CHAR8 (8) DUP (?) ; < 8 characters ID
+ ModuleVersion CHAR8 (12) DUP (?) ; < 12 characters version
+ ModuleDispatcher POINTER ? ; < A pointer point to dispatcher
+ NextBlock POINTER ? ; < Next module header link
+AMD_MODULE_HEADER ENDS
+
+; AMD_CODE_HEADER Signatures.
+AGESA_CODE_SIGNATURE TEXTEQU <'!', '!', '!', 'A', 'G', 'E', 'S', 'A'>
+CIMXNB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'>
+CIMXSB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'>
+
+; AGESA_CODE_SIGNATURE
+AMD_CODE_HEADER STRUCT
+ Signature CHAR8 (8) DUP (?) ; < code header Signature
+ ComponentName CHAR8 (16) DUP (?) ; < 16 character name of the code module
+ Version CHAR8 (12) DUP (?) ; < 12 character version string
+ TerminatorNull CHAR8 ? ; < null terminated string
+ VerReserved CHAR8 (7) DUP (?) ; < reserved space
+AMD_CODE_HEADER ENDS
+
+ ; Extended PCI address format
+EXT_PCI_ADDR STRUCT
+ Register UINT32 ?
+; IN OUT UINT32 Register:12; ; < Register offset
+; IN OUT UINT32 Function:3; ; < Function number
+; IN OUT UINT32 Device:5; ; < Device number
+; IN OUT UINT32 Bus:8; ; < Bus number
+; IN OUT UINT32 Segment:4; ; < Segment
+EXT_PCI_ADDR ENDS
+
+ ; Union type for PCI address
+PCI_ADDR UNION
+ AddressValue UINT32 ? ; < Formal address
+ Address EXT_PCI_ADDR {} ; < Extended address
+PCI_ADDR ENDS
+
+ ; SBDFO - Segment Bus Device Function Offset
+ ; 31:28 Segment (4-bits)
+ ; 27:20 Bus (8-bits)
+ ; 19:15 Device (5-bits)
+ ; 14:12 Function(3-bits)
+ ; 11:00 Offset (12-bits)
+
+
+
+ ILLEGAL_SBDFO EQU 0FFFFFFFFh
+
+ ; CPUID data received registers format
+CPUID_DATA STRUCT
+ EAX_Reg UINT32 ? ; < CPUID instruction result in EAX
+ EBX_Reg UINT32 ? ; < CPUID instruction result in EBX
+ ECX_Reg UINT32 ? ; < CPUID instruction result in ECX
+ EDX_Reg UINT32 ? ; < CPUID instruction result in EDX
+CPUID_DATA ENDS
+
+ ; HT frequency for external callbacks
+;typedef enum {
+ HT_FREQUENCY_200M EQU 0 ; < HT speed 200 for external callbacks
+ HT_FREQUENCY_400M EQU 2 ; < HT speed 400 for external callbacks
+ HT_FREQUENCY_600M EQU 4 ; < HT speed 600 for external callbacks
+ HT_FREQUENCY_800M EQU 5 ; < HT speed 800 for external callbacks
+ HT_FREQUENCY_1000M EQU 6 ; < HT speed 1000 for external callbacks
+ HT_FREQUENCY_1200M EQU 7 ; < HT speed 1200 for external callbacks
+ HT_FREQUENCY_1400M EQU 8 ; < HT speed 1400 for external callbacks
+ HT_FREQUENCY_1600M EQU 9 ; < HT speed 1600 for external callbacks
+ HT_FREQUENCY_1800M EQU 10 ; < HT speed 1800 for external callbacks
+ HT_FREQUENCY_2000M EQU 11 ; < HT speed 2000 for external callbacks
+ HT_FREQUENCY_2200M EQU 12 ; < HT speed 2200 for external callbacks
+ HT_FREQUENCY_2400M EQU 13 ; < HT speed 2400 for external callbacks
+ HT_FREQUENCY_2600M EQU 14 ; < HT speed 2600 for external callbacks
+ HT_FREQUENCY_2800M EQU 17 ; < HT speed 2800 for external callbacks
+ HT_FREQUENCY_3000M EQU 18 ; < HT speed 3000 for external callbacks
+ HT_FREQUENCY_3200M EQU 19 ; < HT speed 3200 for external callbacks
+ HT_FREQUENCY_MAX EQU 20 ; < Limit Check.
+HT_FREQUENCIES TEXTEQU <DWORD> ;} HT_FREQUENCIES;
+
+HT3_FREQUENCY_MIN EQU HT_FREQUENCY_1200M
+
+IFNDEF BIT0
+ BIT0 EQU 0000000000000001h
+ENDIF
+IFNDEF BIT1
+ BIT1 EQU 0000000000000002h
+ENDIF
+IFNDEF BIT2
+ BIT2 EQU 0000000000000004h
+ENDIF
+IFNDEF BIT3
+ BIT3 EQU 0000000000000008h
+ENDIF
+IFNDEF BIT4
+ BIT4 EQU 0000000000000010h
+ENDIF
+IFNDEF BIT5
+ BIT5 EQU 0000000000000020h
+ENDIF
+IFNDEF BIT6
+ BIT6 EQU 0000000000000040h
+ENDIF
+IFNDEF BIT7
+ BIT7 EQU 0000000000000080h
+ENDIF
+IFNDEF BIT8
+ BIT8 EQU 0000000000000100h
+ENDIF
+IFNDEF BIT9
+ BIT9 EQU 0000000000000200h
+ENDIF
+IFNDEF BIT10
+ BIT10 EQU 0000000000000400h
+ENDIF
+IFNDEF BIT11
+ BIT11 EQU 0000000000000800h
+ENDIF
+IFNDEF BIT12
+ BIT12 EQU 0000000000001000h
+ENDIF
+IFNDEF BIT13
+ BIT13 EQU 0000000000002000h
+ENDIF
+IFNDEF BIT14
+ BIT14 EQU 0000000000004000h
+ENDIF
+IFNDEF BIT15
+ BIT15 EQU 0000000000008000h
+ENDIF
+IFNDEF BIT16
+ BIT16 EQU 0000000000010000h
+ENDIF
+IFNDEF BIT17
+ BIT17 EQU 0000000000020000h
+ENDIF
+IFNDEF BIT18
+ BIT18 EQU 0000000000040000h
+ENDIF
+IFNDEF BIT19
+ BIT19 EQU 0000000000080000h
+ENDIF
+IFNDEF BIT20
+ BIT20 EQU 0000000000100000h
+ENDIF
+IFNDEF BIT21
+ BIT21 EQU 0000000000200000h
+ENDIF
+IFNDEF BIT22
+ BIT22 EQU 0000000000400000h
+ENDIF
+IFNDEF BIT23
+ BIT23 EQU 0000000000800000h
+ENDIF
+IFNDEF BIT24
+ BIT24 EQU 0000000001000000h
+ENDIF
+IFNDEF BIT25
+ BIT25 EQU 0000000002000000h
+ENDIF
+IFNDEF BIT26
+ BIT26 EQU 0000000004000000h
+ENDIF
+IFNDEF BIT27
+ BIT27 EQU 0000000008000000h
+ENDIF
+IFNDEF BIT28
+ BIT28 EQU 0000000010000000h
+ENDIF
+IFNDEF BIT29
+ BIT29 EQU 0000000020000000h
+ENDIF
+IFNDEF BIT30
+ BIT30 EQU 0000000040000000h
+ENDIF
+IFNDEF BIT31
+ BIT31 EQU 0000000080000000h
+ENDIF
+IFNDEF BIT32
+ BIT32 EQU 0000000100000000h
+ENDIF
+IFNDEF BIT33
+ BIT33 EQU 0000000200000000h
+ENDIF
+IFNDEF BIT34
+ BIT34 EQU 0000000400000000h
+ENDIF
+IFNDEF BIT35
+ BIT35 EQU 0000000800000000h
+ENDIF
+IFNDEF BIT36
+ BIT36 EQU 0000001000000000h
+ENDIF
+IFNDEF BIT37
+ BIT37 EQU 0000002000000000h
+ENDIF
+IFNDEF BIT38
+ BIT38 EQU 0000004000000000h
+ENDIF
+IFNDEF BIT39
+ BIT39 EQU 0000008000000000h
+ENDIF
+IFNDEF BIT40
+ BIT40 EQU 0000010000000000h
+ENDIF
+IFNDEF BIT41
+ BIT41 EQU 0000020000000000h
+ENDIF
+IFNDEF BIT42
+ BIT42 EQU 0000040000000000h
+ENDIF
+IFNDEF BIT43
+ BIT43 EQU 0000080000000000h
+ENDIF
+IFNDEF BIT44
+ BIT44 EQU 0000100000000000h
+ENDIF
+IFNDEF BIT45
+ BIT45 EQU 0000200000000000h
+ENDIF
+IFNDEF BIT46
+ BIT46 EQU 0000400000000000h
+ENDIF
+IFNDEF BIT47
+ BIT47 EQU 0000800000000000h
+ENDIF
+IFNDEF BIT48
+ BIT48 EQU 0001000000000000h
+ENDIF
+IFNDEF BIT49
+ BIT49 EQU 0002000000000000h
+ENDIF
+IFNDEF BIT50
+ BIT50 EQU 0004000000000000h
+ENDIF
+IFNDEF BIT51
+ BIT51 EQU 0008000000000000h
+ENDIF
+IFNDEF BIT52
+ BIT52 EQU 0010000000000000h
+ENDIF
+IFNDEF BIT53
+ BIT53 EQU 0020000000000000h
+ENDIF
+IFNDEF BIT54
+ BIT54 EQU 0040000000000000h
+ENDIF
+IFNDEF BIT55
+ BIT55 EQU 0080000000000000h
+ENDIF
+IFNDEF BIT56
+ BIT56 EQU 0100000000000000h
+ENDIF
+IFNDEF BIT57
+ BIT57 EQU 0200000000000000h
+ENDIF
+IFNDEF BIT58
+ BIT58 EQU 0400000000000000h
+ENDIF
+IFNDEF BIT59
+ BIT59 EQU 0800000000000000h
+ENDIF
+IFNDEF BIT60
+ BIT60 EQU 1000000000000000h
+ENDIF
+IFNDEF BIT61
+ BIT61 EQU 2000000000000000h
+ENDIF
+IFNDEF BIT62
+ BIT62 EQU 4000000000000000h
+ENDIF
+IFNDEF BIT63
+ BIT63 EQU 8000000000000000h
+ENDIF
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Legacy/bridge32.inc b/src/vendorcode/amd/agesa/f16kb/Legacy/bridge32.inc
new file mode 100644
index 0000000..4e55a57
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Legacy/bridge32.inc
@@ -0,0 +1,576 @@
+; ****************************************************************************
+; *
+; * @file
+; *
+; * Agesa structures and definitions
+; *
+; * Contains AMD AGESA core interface
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project: AGESA
+; * @e sub-project: Include
+; * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+;
+; ****************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*****************************************************************************
+
+PARAM1 textequ <[bp+8]>
+PARAM2 textequ <[bp+12]>
+PARAM3 textequ <[bp+16]>
+RETAddress textequ <[bp+4]>
+
+AMD_PRIVATE_PARAMS STRUCT
+ Gate16_CS DW ? ; Segment of AMD_BRIDGE_32 and AMD_CALLOUT_16
+ Gate16_SS DW ? ; RM stack segment
+ Router_Seg DW ? ; Segment of oem router
+ Router_Off DW ? ; Offset of oem router
+AMD_PRIVATE_PARAMS ENDS
+
+; OEM may pre-define the GDT and selector offsets. If they do not, use our defaults.
+IFNDEF AGESA_SELECTOR_GDT
+ AGESA_SELECTOR_GDT EQU 00h
+ENDIF
+IFNDEF AGESA_SELECTOR_CODE16
+ AGESA_SELECTOR_CODE16 EQU 08h
+ENDIF
+IFNDEF AGESA_SELECTOR_DATA16
+ AGESA_SELECTOR_DATA16 EQU 10h
+ENDIF
+IFNDEF AGESA_SELECTOR_CODE32
+ AGESA_SELECTOR_CODE32 EQU 18h
+ENDIF
+IFNDEF AGESA_SELECTOR_DATA32
+ AGESA_SELECTOR_DATA32 EQU 20h
+ENDIF
+
+
+AMD_BRIDGE_32_GDT MACRO GDT_Name:REQ
+
+ GDT_Name LABEL BYTE
+ DD 000000000h, 000000000h ; NULL descriptor
+ DD 00000ffffh, 000009b00h ; 16-bit code, fixed up
+ DD 00000ffffh, 000009300h ; 16-bit data, fixed up
+ DD 00000ffffh, 000CF9B00h ; 32-bit protected mode code
+ DD 00000ffffh, 000CF9300h ; 32-bit protected mode data
+ GDT_Length EQU ($-GDT_Name)
+
+ENDM
+
+;+-------------------------------------------------------------------------
+;
+; AMD_BRIDGE_32 - Execute Agesa through Pushhigh interface
+;
+; Processing:
+; The following steps are taken:
+; 1) Enter 32bit Protected Mode (PM32)
+; 2) Run AGESA code
+; 3) Restore Real Mode (RM)
+;
+; Entry:
+; [big real mode] : ds, es set to base 0 limit 4G segment
+; EDX - if not 0, provides a FAR PTR to oem router (Seg | Offset)
+; ESI - configuration block pointer
+;
+; Exit:
+; EAX - return value
+; ESI - configuration block pointer
+; ds, es, fs, gs - Set to 4GB segment limit for Big Real Mode
+;
+; Modified:
+; None
+;
+
+AMD_BRIDGE_32 MACRO GDT_Name
+
+ local copyGDT
+ local flushTo16PM
+ local agesaReturnAddress
+ local leave32bitPM
+ local flush2RM
+
+ push gs
+ push fs
+ push ebx
+ push ecx
+ push edi
+ mov eax, esp
+ push eax
+ movzx esp, sp
+;
+; Do not use any locals here, BP will be changed frequently during RM->PM32->RM
+;
+ pushf
+ cli ; Disable interrupts during AGESA
+ cld ; Need known direction flag during AGESA
+
+;
+; Save the FAR PTR input parameter
+;
+ mov gs, dx ; Offset
+ shr edx, 16
+ mov fs, dx ; Segment
+;
+; Determine where our binary file is and get entry point
+;
+ mov edx, (AMD_CONFIG_PARAMS PTR [esi]).ImageBasePtr
+ add edx, (AMD_IMAGE_HEADER PTR [edx]).EntryPointAddress
+;
+; Figure out the return address we will use after calling AGESA
+; and store it in ebx until we have our stack set up properly
+;
+ mov ebx, cs
+ shl ebx, 4
+ add ebx, OFFSET agesaReturnAddress
+;
+; Save our current RM stack AND entry EBP
+;
+ push ebp
+; push esp
+ push ss
+
+;
+; BEGIN --- STACK MUST BE BALANCED AT THIS POINT --- BEGIN
+;
+; Copy the GDT onto the stack for modification
+;
+ mov cx, GDT_Length
+ sub sp, cx
+ mov bp, sp
+ lea di, GDT_Name
+copyGDT:
+ mov al, cs:[di]
+ mov [bp], al
+ inc di
+ inc bp
+ loop copyGDT
+;
+; Patch 16-bit code and data descriptors on stack. We will
+; fix up CS and SS for PM16 during the callout if applicable.
+;
+ mov bp, sp
+
+ mov eax, cs
+ shl eax, 4
+ mov [bp+AGESA_SELECTOR_CODE16+2], ax
+ shr eax, 16
+ mov [bp+AGESA_SELECTOR_CODE16+4], al
+
+ mov eax, ss
+ shl eax, 4
+ mov [bp+AGESA_SELECTOR_DATA16+2], ax
+ shr eax, 16
+ mov [bp+AGESA_SELECTOR_DATA16+4], al
+;
+; Need to place Length and Address on GDT
+;
+ mov eax, ss
+ shl eax, 4
+ add eax, esp
+ push eax
+ push WORD PTR (GDT_Length-1)
+;
+; Load the GDT
+;
+ mov bp, sp
+ lgdt FWORD PTR [bp]
+;
+; TABLE 1
+;
+; Place PRIVATE DATA on stack DIRECTLY following GDT
+; During this routine, stack data is critical. If
+; order is changed or additional added, bad things
+; will happen!
+;
+; HIGHEST PHYSICAL ADDRESS
+;
+; | ... |
+; ------------------------
+; | old RM SP |
+; | old RM SS |
+; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS + (SIZEOF GDT_LENGTH + 6 {size, address})
+; | GDT_DATA32 |
+; | ... |
+; | GDT_NULL |
+; | GDT Addr, Length |
+; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS
+; | Priv.Gate16_SS |
+; | Priv.Gate16_CS |
+; ------------------------ sp
+; ------ THEN PUSH -------
+; | Return to 16-bit CS |
+; | Return to 16-bit Off |
+; | ... |
+;
+; LOWEST PHYSICAL ADDRESS
+;
+ mov edi, esp
+ sub edi, SIZEOF AMD_PRIVATE_PARAMS
+ mov ax, cs
+ mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS, ax
+ mov ax, ss
+ mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS, ax
+ mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off, gs
+ mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg, fs
+
+ mov esp, edi
+;
+; Save an address for returning to 16 bit real mode on stack,
+; we'll use it in a far ret after turning off CR0.PE so that
+; we can take our address off and force a far jump. Be sure
+; no unexpected data is on the stack after this!
+;
+ mov ax, cs
+ push cs
+ lea ax, flush2RM
+ push ax
+;
+; Convert ss:esp to "flat"
+;
+
+ mov ax, sp
+ push ax
+ mov eax, ss
+ shl eax, 4
+ add eax, esp
+ mov esp, eax ; Load the zero based ESP
+
+;
+; Set CR0.PE
+;
+ mov eax, CR0 ; Get CPU control word 0
+ or al, 01 ; Enable CPU protected mode
+ mov CR0, eax ; Write back to CPU control word 0
+ jmp flushTo16PM
+
+flushTo16PM:
+;
+; 16-bit protected mode
+;
+ mov ax, AGESA_SELECTOR_DATA32
+ mov ds, ax
+ mov es, ax
+ mov fs, ax
+ mov gs, ax
+ mov ss, ax
+;
+; Push our parameters RIGHT TO LEFT, and then return address
+;
+ push esi ; AGESA configuration block pointer (data)
+ push ebx ; after AGESA return offset (32PM flat) - consumed by dispatcher ret
+ pushd AGESA_SELECTOR_CODE32 ; AGESA entry selector (32PM flat)
+ push edx ; AGESA entry point (32PM flat)
+
+ DB 066h
+ retf ; <><><> Enter AGESA 32-bit code!!! <><><>
+
+agesaReturnAddress:
+;
+; Returns from the Agesa 32-bit code still PM32
+;
+ DB 0EAh
+ DD OFFSET leave32bitPM
+ DW AGESA_SELECTOR_CODE16
+
+leave32bitPM:
+;
+; Now in 16-bit PM
+;
+ add esp, 4 ; +4 to remove our config block pointer
+;
+; Eax reserve AGESA_STATUS return code, save it
+;
+ mov ebx, eax
+;
+; Turn off CR0.PE, restore 64K stack limit
+;
+ pop ax
+ mov sp, ax
+ mov ax, AGESA_SELECTOR_DATA16
+ mov ss, ax
+
+ mov eax, CR0
+ and al, NOT 1 ; Disable protected mode
+ mov CR0, eax ; Write back CR0.PE
+;
+; Jump far to enter RM, we saved this address on the stack
+; already. Hopefully stack is balanced through AGESA
+; nor were any params added by pushing them on the stack and
+; not removing them between BEGIN-END comments.
+;
+ retf
+
+flush2RM:
+;
+; Set segments registers for big real mode before returning
+;
+ xor ax, ax
+ mov ds, ax
+ mov es, ax
+ mov fs, ax
+ mov gs, ax
+;
+; Discard GDT, +6 for GDT pointer/size, privates
+;
+ add esp, GDT_Length + 6 + SIZEOF AMD_PRIVATE_PARAMS
+;
+; Restore real mode stack and entry EBP
+;
+ pop cx
+; mov esp, [esp]
+ mov ss, cx
+ pop ebp
+;
+; Restore AGESA_STATUS return code to eax
+;
+ mov eax, ebx
+;
+; END --- STACK MUST BE BALANCED TO THIS POINT --- END
+;
+
+ popf
+ pop ebx
+ mov esp, ebx
+ pop edi
+ pop ecx
+ pop ebx
+ pop fs
+ pop gs
+ ; EXIT AMD_BRIDGE_32
+ENDM
+;+-------------------------------------------------------------------------
+;
+; AMD_CALLOUT_16 - Execute Callback from Pushhigh interface
+;
+; Processing:
+; The following steps are taken:
+; 1) Enter PM16
+; 2) Setup stack, get private params
+; 3) Enter RM
+; 4) Get 3 params
+; 5) Call oemCallout OR oem router
+; 6) Enter PM32
+; 7) Return to Agesa PH
+;
+; Entry:
+; [32-bit protected mode]
+; [esp+8] Func
+; [esp+12] Data
+; [esp+16] Configuration Block
+; [esp+4] return address to Agesa
+;
+; Exit:
+; [32-bit protected mode]
+;
+; Modified:
+; None
+;
+AMD_CALLOUT_16 MACRO LocalOemCalloutRouter
+;
+; Note that we are still PM32, so MASM may work strangely
+;
+
+ push bp ; Save our original SP to access params
+ mov bp, sp
+ push bx
+ push si
+ push di
+ push cx
+ push dx
+ push di
+
+ DB 066h, 0EAh
+ DW OFFSET PM16Entry
+ DW AGESA_SELECTOR_CODE16
+
+PM16Entry:
+;
+; PM16 CS, but still PM32 SS, as we need to access our private params
+; before we enter RM.
+;
+; Note: we are working below the stack temporarily, and and it will
+; not affect our ability to get entry params
+;
+ xor ecx, ecx
+ xor edx, edx
+;
+; SGDT will give us the original location of the GDT on our CAS stack.
+; We need this value because our private parameters are located just
+; below the GDT.
+;
+ mov edi, esp
+ sub edi, GDT_Length + 6
+ sgdt FWORD PTR [edi] ; [edi] = word size, dword address
+ mov edi, DWORD PTR [edi+2] ; Get the PM32 address only
+ sub edi, SIZEOF AMD_PRIVATE_PARAMS + 6
+;
+; cx = code segment of this code in RM
+; dx = stack segment of CAS in RM
+; fs = code segment of oem router (save for later)
+; gs = offset of oem router (save for later)
+; fs and gs are loaded after switch to real mode because we can't
+; use them as scratch pad registers in protected mode
+;
+ mov cx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS
+ mov dx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS
+
+ mov eax, edi ; Save edi in eax for after RM switch
+ mov edi, esp ; Save our current ESP for RM
+
+ movzx ebx, dx
+ shl ebx, 4
+ sub esp, ebx
+
+;
+; We had been accessing the stack in PM32, we will now change to PM16 so we
+; will make the stack segment 64KB limit so SP needs to be fixed made PM16
+; compatible.
+;
+ mov bx, AGESA_SELECTOR_DATA16
+ mov ss, bx
+
+;
+; Save the RM segment and RM offset of the jump we will need to make in
+; order to enter RM so that code in this segment is relocatable.
+;
+; BEGIN --- Don't unbalance the stack --- BEGIN
+;
+ push cx
+ pushw OFFSET RMEntry
+
+ mov ebx, CR0
+ and bl, NOT 1
+ mov CR0, ebx ; CR0.PE cleared
+;
+; Far jump to clear segment descriptor cache and enter RM
+;
+ retf
+
+RMEntry:
+;
+; We are in RM, setup RM stack
+;
+ movzx ebx, dx ; Get RM SS in ebx
+ shl ebx, 4 ; Get our stack top on entry in EBP to
+ sub ebp, ebx ; access our entry parameters
+ sub eax, ebx ; save copy of parameters address
+ mov ss, dx ; Set stack segment
+;
+; We are going to figure out the address to use when we return
+; and have to go back into PM32 while we have access to it
+;
+ movzx ebx, cx ; Get original CS in ebx
+ shl ebx, 4
+ add ebx, OFFSET PM32Entry
+;
+; Now we put our data, func, block params into calling convention
+; for our hook
+;
+; ECX = Func
+; EDX = Data
+; ESI = config pointer
+;
+ mov ecx, PARAM1 ; Func
+ mov edx, PARAM2 ; Data
+ mov esi, PARAM3 ; pointer
+
+ push ebx ; Save PM32 mode switch address
+ push edi ; Save PM32 stack pointer
+ pushf
+;
+; Get Router Function Address
+;
+ mov edi, eax
+ mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg
+ mov fs, ax
+ mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off
+ mov gs, ax
+
+ mov eax, AGESA_UNSUPPORTED ; Default return value
+;
+; If AMD_BRIDGE_32 EDX == 0 call oemCallout
+; otherwise call FAR PTR EDX
+;
+; Critical:
+; sp+2 - EDI aka PM32 stack address
+; sp+4 - address of PM32Entry in PM32
+;
+ mov bx, fs
+ shl ebx, 16
+ mov bx, gs
+
+ .if (ebx == 0)
+ call LocalOemCalloutRouter
+ .else
+;
+; Make far call to Router function
+;
+ push cs
+ push offset CalloutReturn
+ push ebx
+ retf
+CalloutReturn:
+ .endif
+;
+; Restore PM32 esp from RM stack
+;
+ popf
+ pop edi ; Our PM32 stack pointer
+ pop edx ; Our PM32 mode switch address
+
+ mov ebx, CR0
+ or bl, 1 ; CR0.PE set
+ mov CR0, ebx
+
+ mov ebx, AGESA_SELECTOR_DATA32
+ pushd AGESA_SELECTOR_CODE32 ; PM32 selector
+ push edx ; PM32 entry point
+
+ DB 066h
+ retf ; Far jump to enter PM32
+
+PM32Entry:
+;
+; END --- Don't unbalance the stack --- END
+; We are now PM32, so remember MASM is assembling in 16-bit again
+;
+ mov ss, bx
+ mov ds, bx
+ mov es, bx
+ mov fs, bx
+ mov gs, bx
+
+ mov sp, di
+ pop di
+ pop dx
+ pop cx
+ pop di
+ pop si
+ pop bx
+ pop bp
+ ; EXIT AMD_CALLOUT_16
+ENDM
diff --git a/src/vendorcode/amd/agesa/f16kb/Lib/amdlib.c b/src/vendorcode/amd/agesa/f16kb/Lib/amdlib.c
new file mode 100644
index 0000000..515f999
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Lib/amdlib.c
@@ -0,0 +1,1360 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Library
+ *
+ * Contains interface to the AMD AGESA library
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Lib
+ * @e \$Revision: 48409 $ @e \$Date: 2011-03-08 11:19:40 -0600 (Tue, 08 Mar 2011) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "amdlib.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE LIB_AMDLIB_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+GetPciMmioAddress (
+ OUT UINT64 *MmioAddress,
+ OUT UINT32 *MmioSize,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+LibAmdGetDataFromPtr (
+ IN ACCESS_WIDTH AccessWidth,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ OUT UINT32 *TemData,
+ OUT UINT32 *TempDataMask
+ );
+VOID
+IdsOutPort (
+ IN UINT32 Addr,
+ IN UINT32 Value,
+ IN UINT32 Flag
+ );
+
+VOID
+CpuidRead (
+ IN UINT32 CpuidFcnAddress,
+ OUT CPUID_DATA *Value
+ );
+
+UINT8
+ReadNumberOfCpuCores(
+ VOID
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT8
+ReadIo8 (
+ IN UINT16 Address
+ )
+{
+ return __inbyte (Address);
+}
+UINT16
+ReadIo16 (
+ IN UINT16 Address
+ )
+{
+ return __inword (Address);
+}
+UINT32
+ReadIo32 (
+ IN UINT16 Address
+ )
+{
+ return __indword (Address);
+}
+VOID
+WriteIo8 (
+ IN UINT16 Address,
+ IN UINT8 Data
+ )
+{
+ __outbyte (Address, Data);
+}
+VOID
+WriteIo16 (
+ IN UINT16 Address,
+ IN UINT16 Data
+ )
+{
+ __outword (Address, Data);
+}
+VOID
+WriteIo32 (
+ IN UINT16 Address,
+ IN UINT32 Data
+ )
+{
+ __outdword (Address, Data);
+}
+STATIC
+UINT64 SetFsBase (
+ UINT64 address
+ )
+{
+ UINT64 hwcr;
+ hwcr = __readmsr (0xC0010015);
+ __writemsr (0xC0010015, hwcr | 1 << 17);
+ __writemsr (0xC0000100, address);
+ return hwcr;
+}
+STATIC
+VOID
+RestoreHwcr (
+ UINT64
+ value
+ )
+{
+ __writemsr (0xC0010015, value);
+}
+UINT8
+Read64Mem8 (
+ IN UINT64 Address
+ )
+{
+ UINT8 dataRead;
+ UINT64 hwcrSave;
+ if ((Address >> 32) == 0) {
+ return *(volatile UINT8 *) (UINTN) Address;
+ }
+ hwcrSave = SetFsBase (Address);
+ dataRead = __readfsbyte (0);
+ RestoreHwcr (hwcrSave);
+ return dataRead;
+}
+UINT16
+Read64Mem16 (
+ IN UINT64 Address
+ )
+{
+ UINT16 dataRead;
+ UINT64 hwcrSave;
+ if ((Address >> 32) == 0) {
+ return *(volatile UINT16 *) (UINTN) Address;
+ }
+ hwcrSave = SetFsBase (Address);
+ dataRead = __readfsword (0);
+ RestoreHwcr (hwcrSave);
+ return dataRead;
+}
+UINT32
+Read64Mem32 (
+ IN UINT64 Address
+ )
+{
+ UINT32 dataRead;
+ UINT64 hwcrSave;
+ if ((Address >> 32) == 0) {
+ return *(volatile UINT32 *) (UINTN) Address;
+ }
+ hwcrSave = SetFsBase (Address);
+ dataRead = __readfsdword (0);
+ RestoreHwcr (hwcrSave);
+ return dataRead;
+ }
+VOID
+Write64Mem8 (
+ IN UINT64 Address,
+ IN UINT8 Data
+ )
+{
+ if ((Address >> 32) == 0){
+ *(volatile UINT8 *) (UINTN) Address = Data;
+ }
+ else {
+ UINT64 hwcrSave;
+ hwcrSave = SetFsBase (Address);
+ __writefsbyte (0, Data);
+ RestoreHwcr (hwcrSave);
+ }
+}
+VOID
+Write64Mem16 (
+ IN UINT64 Address,
+ IN UINT16 Data
+ )
+{
+ if ((Address >> 32) == 0){
+ *(volatile UINT16 *) (UINTN) Address = Data;
+ }
+ else {
+ UINT64 hwcrSave;
+ hwcrSave = SetFsBase (Address);
+ __writefsword (0, Data);
+ RestoreHwcr (hwcrSave);
+ }
+}
+VOID
+Write64Mem32 (
+ IN UINT64 Address,
+ IN UINT32 Data
+ )
+{
+ if ((Address >> 32) == 0){
+ *(volatile UINT32 *) (UINTN) Address = Data;
+ }
+ else {
+ UINT64 hwcrSave;
+ hwcrSave = SetFsBase (Address);
+ __writefsdword (0, Data);
+ RestoreHwcr (hwcrSave);
+ }
+}
+VOID
+LibAmdReadCpuReg (
+ IN UINT8 RegNum,
+ OUT UINT32 *Value
+ )
+{
+ *Value = 0;
+ switch (RegNum){
+ case CR4_REG:
+ *Value = __readcr4 ();
+ break;
+ case DR0_REG:
+ *Value = __readdr (0);
+ break;
+ case DR1_REG:
+ *Value = __readdr (1);
+ break;
+ case DR2_REG:
+ *Value = __readdr (2);
+ break;
+ case DR3_REG:
+ *Value = __readdr (3);
+ break;
+ case DR7_REG:
+ *Value = __readdr (7);
+ break;
+ default:
+ *Value = -1;
+ }
+}
+VOID
+LibAmdWriteCpuReg (
+ IN UINT8 RegNum,
+ IN UINT32 Value
+ )
+{
+ switch (RegNum){
+ case CR4_REG:
+ __writecr4 (Value);
+ break;
+ case DR0_REG:
+ __writedr (0, Value);
+ break;
+ case DR1_REG:
+ __writedr (1, Value);
+ break;
+ case DR2_REG:
+ __writedr (2, Value);
+ break;
+ case DR3_REG:
+ __writedr (3, Value);
+ break;
+ case DR7_REG:
+ __writedr (7, Value);
+ break;
+ default:
+ ;
+ }
+}
+VOID
+LibAmdWriteBackInvalidateCache (
+ IN VOID
+ )
+{
+ __wbinvd ();
+}
+VOID
+LibAmdHDTBreakPoint (
+ VOID
+ )
+{
+ __writemsr (0xC001100A, __readmsr (0xC001100A) | 1);
+ __debugbreak (); // do you really need icebp? If so, go back to asm code
+}
+UINT8
+LibAmdBitScanForward (
+ IN UINT32 value
+ )
+{
+ UINTN Index;
+ for (Index = 0; Index < 32; Index++){
+ if (value & (1 << Index)) break;
+ }
+ return (UINT8) Index;
+}
+UINT8
+LibAmdBitScanReverse (
+ IN UINT32 value
+)
+{
+ UINTN Index;
+ for (Index = 31; Index >= 0; Index--){
+ if (value & (1 << Index)) break;
+ }
+ return (UINT8) Index;
+}
+VOID
+LibAmdMsrRead (
+ IN UINT32 MsrAddress,
+ OUT UINT64 *Value,
+ IN OUT AMD_CONFIG_PARAMS *ConfigPtr
+ )
+{
+ *Value = __readmsr (MsrAddress);
+}
+VOID
+LibAmdMsrWrite (
+ IN UINT32 MsrAddress,
+ IN UINT64 *Value,
+ IN OUT AMD_CONFIG_PARAMS *ConfigPtr
+ )
+{
+ __writemsr (MsrAddress, *Value);
+}
+void LibAmdCpuidRead (
+ IN UINT32 CpuidFcnAddress,
+ OUT CPUID_DATA* Value,
+ IN OUT AMD_CONFIG_PARAMS *ConfigPtr
+ )
+{
+ __cpuid ((int *)Value, CpuidFcnAddress);
+}
+UINT64
+ReadTSC (
+ VOID
+ )
+{
+ return __rdtsc ();
+}
+VOID
+LibAmdSimNowEnterDebugger (
+ VOID
+ )
+{
+ STATIC CONST UINT8 opcode [] = {0x60, // pushad
+ 0xBB, 0x02, 0x00, 0x00, 0x00, // mov ebx, 2
+ 0xB8, 0x0B, 0xD0, 0xCC, 0xBA, // mov eax, 0xBACCD00B
+ 0x0F, 0xA2, // cpuid
+ 0x61, // popad
+ 0xC3 // ret
+ };
+ ((VOID (*)(VOID)) (size_t) opcode) (); // call the function
+}
+#if 0
+VOID F10RevDProbeFilterCritical (
+ IN PCI_ADDR PciAddress,
+ IN UINT32 PciRegister
+ )
+{
+ UINT64 msrsave;
+ msrsave = __readmsr (0xC001001F);
+ __writemsr (0xC001001F, msrsave | 1ULL << 46); // EnableCf8ExtCfg
+ _mm_mfence ();
+ __outdword (0xCF8, PciAddress.AddressValue);
+ _mm_mfence ();
+ __outdword (0xCFC, PciRegister | 2);
+ _mm_mfence ();
+ __writemsr (0xC001001F, msrsave);
+}
+#endif
+VOID
+IdsOutPort (
+ IN UINT32 Addr,
+ IN UINT32 Value,
+ IN UINT32 Flag
+ )
+{
+ __outdword ((UINT16) Addr, Value);
+}
+VOID
+StopHere (
+ VOID
+ )
+{
+ VOLATILE UINTN x = 1;
+ while (x);
+}
+VOID
+LibAmdCLFlush (
+ IN UINT64 Address,
+ IN UINT8 Count
+ )
+{
+ UINT64 hwcrSave;
+ UINT8 *address32;
+ UINTN Index;
+ address32 = 0;
+ hwcrSave = SetFsBase (Address);
+ for (Index = 0; Index < Count; Index++){
+ _mm_mfence ();
+ _mm_clflush_fs (&address32 [Index * 64]);
+ }
+ RestoreHwcr (hwcrSave);
+}
+
+VOID
+LibAmdFinit()
+{
+ /* TODO: finit */
+ __asm__ volatile ("finit");
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Read IO port
+ *
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] IoAddress IO port address
+ * @param[in] Value Pointer to save data
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+LibAmdIoRead (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT16 IoAddress,
+ OUT VOID *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ switch (AccessWidth) {
+ case AccessWidth8:
+ case AccessS3SaveWidth8:
+ *(UINT8 *) Value = ReadIo8 (IoAddress);
+ break;
+ case AccessWidth16:
+ case AccessS3SaveWidth16:
+ *(UINT16 *) Value = ReadIo16 (IoAddress);
+ break;
+ case AccessWidth32:
+ case AccessS3SaveWidth32:
+ *(UINT32 *) Value = ReadIo32 (IoAddress);
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Write IO port
+ *
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] IoAddress IO port address
+ * @param[in] Value Pointer to data
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+LibAmdIoWrite (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT16 IoAddress,
+ IN VOID *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ switch (AccessWidth) {
+ case AccessWidth8:
+ case AccessS3SaveWidth8:
+ WriteIo8 (IoAddress, *(UINT8 *) Value);
+ break;
+ case AccessWidth16:
+ case AccessS3SaveWidth16:
+ WriteIo16 (IoAddress, *(UINT16 *) Value);
+ break;
+ case AccessWidth32:
+ case AccessS3SaveWidth32:
+ WriteIo32 (IoAddress, *(UINT32 *) Value);
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * IO read modify write
+ *
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] IoAddress IO address
+ * @param[in] Data OR data
+ * @param[in] DataMask Mask to be used before data write back to register.
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+LibAmdIoRMW (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT16 IoAddress,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 TempData;
+ UINT32 TempMask;
+ UINT32 Value;
+ LibAmdGetDataFromPtr (AccessWidth, Data, DataMask, &TempData, &TempMask);
+ LibAmdIoRead (AccessWidth, IoAddress, &Value, StdHeader);
+ Value = (Value & (~TempMask)) | TempData;
+ LibAmdIoWrite (AccessWidth, IoAddress, &Value, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Poll IO register
+ *
+ * Poll register until (RegisterValue & DataMask) == Data
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] IoAddress IO address
+ * @param[in] Data Data to compare
+ * @param[in] DataMask And mask
+ * @param[in] Delay Poll for time in 100ns (not supported)
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+LibAmdIoPoll (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT16 IoAddress,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN UINT64 Delay,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 TempData;
+ UINT32 TempMask;
+ UINT32 Value;
+ LibAmdGetDataFromPtr (AccessWidth, Data, DataMask, &TempData, &TempMask);
+ do {
+ LibAmdIoRead (AccessWidth, IoAddress, &Value, StdHeader);
+ } while (TempData != (Value & TempMask));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Read memory/MMIO
+ *
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] MemAddress Memory address
+ * @param[in] Value Pointer to data
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+LibAmdMemRead (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT64 MemAddress,
+ OUT VOID *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ switch (AccessWidth) {
+ case AccessWidth8:
+ case AccessS3SaveWidth8:
+ *(UINT8 *) Value = Read64Mem8 (MemAddress);
+ break;
+ case AccessWidth16:
+ case AccessS3SaveWidth16:
+ *(UINT16 *) Value = Read64Mem16 (MemAddress);
+ break;
+ case AccessWidth32:
+ case AccessS3SaveWidth32:
+ *(UINT32 *) Value = Read64Mem32 (MemAddress);
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Write memory/MMIO
+ *
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] MemAddress Memory address
+ * @param[in] Value Pointer to data
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+LibAmdMemWrite (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT64 MemAddress,
+ IN VOID *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ switch (AccessWidth) {
+ case AccessWidth8:
+ case AccessS3SaveWidth8:
+ Write64Mem8 (MemAddress, *((UINT8 *) Value));
+ break;
+ case AccessWidth16:
+ case AccessS3SaveWidth16:
+ Write64Mem16 (MemAddress, *((UINT16 *) Value));
+ break;
+ case AccessWidth32:
+ case AccessS3SaveWidth32:
+ Write64Mem32 (MemAddress, *((UINT32 *) Value));
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Memory/MMIO read modify write
+ *
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] MemAddress Memory address
+ * @param[in] Data OR data
+ * @param[in] DataMask Mask to be used before data write back to register.
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+LibAmdMemRMW (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT64 MemAddress,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 TempData;
+ UINT32 TempMask;
+ UINT32 Value;
+ LibAmdGetDataFromPtr (AccessWidth, Data, DataMask, &TempData, &TempMask);
+ LibAmdMemRead (AccessWidth, MemAddress, &Value, StdHeader);
+ Value = (Value & (~TempMask)) | TempData;
+ LibAmdMemWrite (AccessWidth, MemAddress, &Value, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Poll Mmio
+ *
+ * Poll register until (RegisterValue & DataMask) == Data
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] MemAddress Memory address
+ * @param[in] Data Data to compare
+ * @param[in] DataMask AND mask
+ * @param[in] Delay Poll for time in 100ns (not supported)
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+LibAmdMemPoll (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT64 MemAddress,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN UINT64 Delay,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 TempData = 0;
+ UINT32 TempMask = 0;
+ UINT32 Value;
+ LibAmdGetDataFromPtr (AccessWidth, Data, DataMask, &TempData, &TempMask);
+ do {
+ LibAmdMemRead (AccessWidth, MemAddress, &Value, StdHeader);
+ } while (TempData != (Value & TempMask));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Read PCI config space
+ *
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] PciAddress Pci address
+ * @param[in] Value Pointer to data
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+LibAmdPciRead (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR PciAddress,
+ OUT VOID *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 LegacyPciAccess;
+ UINT32 MMIOSize;
+ UINT64 RMWrite;
+ UINT64 RMWritePrevious;
+ UINT64 MMIOAddress;
+
+ ASSERT (StdHeader != NULL);
+ ASSERT (PciAddress.AddressValue != ILLEGAL_SBDFO);
+ if (!GetPciMmioAddress (&MMIOAddress, &MMIOSize, StdHeader)) {
+ // We need to convert our "portable" PCI address into a "real" PCI access
+ LegacyPciAccess = ((1 << 31) + (PciAddress.Address.Register & 0xFC) + (PciAddress.Address.Function << 8) + (PciAddress.Address.Device << 11) + (PciAddress.Address.Bus << 16) + ((PciAddress.Address.Register & 0xF00) << (24 - 8)));
+ if (PciAddress.Address.Register <= 0xFF) {
+ LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
+ LibAmdIoRead (AccessWidth, IOCFC + (UINT16) (PciAddress.Address.Register & 0x3), Value, StdHeader);
+ } else {
+ LibAmdMsrRead (NB_CFG, &RMWritePrevious, StdHeader);
+ RMWrite = RMWritePrevious | 0x0000400000000000;
+ LibAmdMsrWrite (NB_CFG, &RMWrite, StdHeader);
+ LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
+ LibAmdIoRead (AccessWidth, IOCFC + (UINT16) (PciAddress.Address.Register & 0x3), Value, StdHeader);
+ LibAmdMsrWrite (NB_CFG, &RMWritePrevious, StdHeader);
+ }
+ //IDS_HDT_CONSOLE (LIB_PCI_RD, "~PCI RD %08x = %08x\n", LegacyPciAccess, *(UINT32 *)Value);
+ } else {
+ // Setup the MMIO address
+ ASSERT ((MMIOAddress + MMIOSize) > (MMIOAddress + (PciAddress.AddressValue & 0x0FFFFFFF)));
+ MMIOAddress += (PciAddress.AddressValue & 0x0FFFFFFF);
+ LibAmdMemRead (AccessWidth, MMIOAddress, Value, StdHeader);
+ //IDS_HDT_CONSOLE (LIB_PCI_RD, "~MMIO RD %08x = %08x\n", (UINT32) MMIOAddress, *(UINT32 *)Value);
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Write PCI config space
+ *
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] PciAddress Pci address
+ * @param[in] Value Pointer to data
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+LibAmdPciWrite (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR PciAddress,
+ IN VOID *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 LegacyPciAccess;
+ UINT32 MMIOSize;
+ UINT64 RMWrite;
+ UINT64 RMWritePrevious;
+ UINT64 MMIOAddress;
+
+ ASSERT (StdHeader != NULL);
+ ASSERT (PciAddress.AddressValue != ILLEGAL_SBDFO);
+ if (!GetPciMmioAddress (&MMIOAddress, &MMIOSize, StdHeader)) {
+ // We need to convert our "portable" PCI address into a "real" PCI access
+ LegacyPciAccess = ((1 << 31) + (PciAddress.Address.Register & 0xFC) + (PciAddress.Address.Function << 8) + (PciAddress.Address.Device << 11) + (PciAddress.Address.Bus << 16) + ((PciAddress.Address.Register & 0xF00) << (24 - 8)));
+ if (PciAddress.Address.Register <= 0xFF) {
+ LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
+ LibAmdIoWrite (AccessWidth, IOCFC + (UINT16) (PciAddress.Address.Register & 0x3), Value, StdHeader);
+ } else {
+ LibAmdMsrRead (NB_CFG, &RMWritePrevious, StdHeader);
+ RMWrite = RMWritePrevious | 0x0000400000000000;
+ LibAmdMsrWrite (NB_CFG, &RMWrite, StdHeader);
+ LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
+ LibAmdIoWrite (AccessWidth, IOCFC + (UINT16) (PciAddress.Address.Register & 0x3), Value, StdHeader);
+ LibAmdMsrWrite (NB_CFG, &RMWritePrevious, StdHeader);
+ }
+ //IDS_HDT_CONSOLE (LIB_PCI_WR, "~PCI WR %08x = %08x\n", LegacyPciAccess, *(UINT32 *)Value);
+ //printk(BIOS_DEBUG, "~PCI WR %08x = %08x\n", LegacyPciAccess, *(UINT32 *)Value);;
+ //printk(BIOS_DEBUG, "LibAmdPciWrite\n");
+ } else {
+ // Setup the MMIO address
+ ASSERT ((MMIOAddress + MMIOSize) > (MMIOAddress + (PciAddress.AddressValue & 0x0FFFFFFF)));
+ MMIOAddress += (PciAddress.AddressValue & 0x0FFFFFFF);
+ LibAmdMemWrite (AccessWidth, MMIOAddress, Value, StdHeader);
+ //IDS_HDT_CONSOLE (LIB_PCI_WR, "~MMIO WR %08x = %08x\n", (UINT32) MMIOAddress, *(UINT32 *)Value);
+ //printk(BIOS_DEBUG, "~MMIO WR %08x = %08x\n", (UINT32) MMIOAddress, *(UINT32 *)Value);
+ //printk(BIOS_DEBUG, "LibAmdPciWrite mmio\n");
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * PCI read modify write
+ *
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] PciAddress Pci address
+ * @param[in] Data OR Data
+ * @param[in] DataMask Mask to be used before data write back to register.
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+LibAmdPciRMW (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR PciAddress,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 TempData = 0;
+ UINT32 TempMask = 0;
+ UINT32 Value;
+ LibAmdGetDataFromPtr (AccessWidth, Data, DataMask, &TempData, &TempMask);
+ LibAmdPciRead (AccessWidth, PciAddress, &Value, StdHeader);
+ Value = (Value & (~TempMask)) | TempData;
+ LibAmdPciWrite (AccessWidth, PciAddress, &Value, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Poll PCI config space register
+ *
+ * Poll register until (RegisterValue & DataMask) == Data
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] PciAddress Pci address
+ * @param[in] Data Data to compare
+ * @param[in] DataMask AND mask
+ * @param[in] Delay Poll for time in 100ns (not supported)
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+LibAmdPciPoll (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR PciAddress,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN UINT64 Delay,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 TempData = 0;
+ UINT32 TempMask = 0;
+ UINT32 Value;
+ LibAmdGetDataFromPtr (AccessWidth, Data, DataMask, &TempData, &TempMask);
+ do {
+ LibAmdPciRead (AccessWidth, PciAddress, &Value, StdHeader);
+ } while (TempData != (Value & TempMask));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get MMIO base address for PCI accesses
+ *
+ * @param[out] MmioAddress PCI MMIO base address
+ * @param[out] MmioSize Size of region in bytes
+ * @param[in] StdHeader Standard configuration header
+ *
+ * @retval TRUE MmioAddress/MmioSize are valid
+ */
+BOOLEAN
+STATIC
+GetPciMmioAddress (
+ OUT UINT64 *MmioAddress,
+ OUT UINT32 *MmioSize,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BOOLEAN MmioIsEnabled;
+ UINT32 EncodedSize;
+ UINT64 LocalMsrRegister;
+
+ ASSERT (StdHeader != NULL);
+
+ MmioIsEnabled = FALSE;
+ LibAmdMsrRead (MSR_MMIO_Cfg_Base, &LocalMsrRegister, StdHeader);
+ if ((LocalMsrRegister & BIT0) != 0) {
+ *MmioAddress = LocalMsrRegister & 0xFFFFFFFFFFF00000;
+ EncodedSize = (UINT32) ((LocalMsrRegister & 0x3C) >> 2);
+ *MmioSize = ((1 << EncodedSize) * 0x100000);
+ MmioIsEnabled = TRUE;
+ }
+ return MmioIsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Read field of PCI config register.
+ *
+ *
+ *
+ * @param[in] Address Pci address (register must be DWORD aligned)
+ * @param[in] Highbit High bit position of the field in DWORD
+ * @param[in] Lowbit Low bit position of the field in DWORD
+ * @param[out] Value Pointer to data
+ * @param[in] StdHeader Standard configuration header
+ */
+VOID
+LibAmdPciReadBits (
+ IN PCI_ADDR Address,
+ IN UINT8 Highbit,
+ IN UINT8 Lowbit,
+ OUT UINT32 *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ ASSERT (Highbit < 32 && Lowbit < 32 && Highbit >= Lowbit && (Address.AddressValue & 3) == 0);
+
+ LibAmdPciRead (AccessWidth32, Address, Value, StdHeader);
+ *Value >>= Lowbit; // Shift
+
+ // A 1 << 32 == 1 << 0 due to x86 SHL instruction, so skip if that is the case
+
+ if ((Highbit - Lowbit) != 31) {
+ *Value &= (((UINT32) 1 << (Highbit - Lowbit + 1)) - 1);
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Write field of PCI config register.
+ *
+ *
+ *
+ * @param[in] Address Pci address (register must be DWORD aligned)
+ * @param[in] Highbit High bit position of the field in DWORD
+ * @param[in] Lowbit Low bit position of the field in DWORD
+ * @param[in] Value Pointer to data
+ * @param[in] StdHeader Standard configuration header
+ */
+VOID
+LibAmdPciWriteBits (
+ IN PCI_ADDR Address,
+ IN UINT8 Highbit,
+ IN UINT8 Lowbit,
+ IN UINT32 *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Temp;
+ UINT32 Mask;
+
+ ASSERT (Highbit < 32 && Lowbit < 32 && Highbit >= Lowbit && (Address.AddressValue & 3) == 0);
+
+ // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+
+ if ((Highbit - Lowbit) != 31) {
+ Mask = (((UINT32) 1 << (Highbit - Lowbit + 1)) - 1);
+ } else {
+ Mask = (UINT32) 0xFFFFFFFF;
+ }
+
+ LibAmdPciRead (AccessWidth32, Address, &Temp, StdHeader);
+ Temp &= ~(Mask << Lowbit);
+ Temp |= (*Value & Mask) << Lowbit;
+ LibAmdPciWrite (AccessWidth32, Address, &Temp, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Locate next capability pointer
+ *
+ * Given a SBDFO this routine will find the next PCI capabilities list entry.
+ * if the end of the list is reached, or if a problem is detected, then ILLEGAL_SBDFO is
+ * returned.
+ * To start a new search from the head of the list, specify a SBDFO with an offset of zero.
+ *
+ * @param[in,out] Address Pci address
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+LibAmdPciFindNextCap (
+ IN OUT PCI_ADDR *Address,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR Base;
+ UINT32 Offset;
+ UINT32 Temp;
+ PCI_ADDR TempAddress;
+
+ ASSERT (Address != NULL);
+ ASSERT (*(UINT32 *) Address != ILLEGAL_SBDFO);
+
+ Base.AddressValue = Address->AddressValue;
+ Offset = Base.Address.Register;
+ Base.Address.Register = 0;
+
+ Address->AddressValue = (UINT32) ILLEGAL_SBDFO;
+
+ // Verify that the SBDFO points to a valid PCI device SANITY CHECK
+ LibAmdPciRead (AccessWidth32, Base, &Temp, StdHeader);
+ if (Temp == 0xFFFFFFFF) {
+ ASSERT (FALSE);
+ return; // There is no device at this address
+ }
+
+ // Verify that the device supports a capability list
+ TempAddress.AddressValue = Base.AddressValue + 0x04;
+ LibAmdPciReadBits (TempAddress, 20, 20, &Temp, StdHeader);
+ if (Temp == 0) {
+ return; // This PCI device does not support capability lists
+ }
+
+ if (Offset != 0) {
+ // If we are continuing on an existing list
+ TempAddress.AddressValue = Base.AddressValue + Offset;
+ LibAmdPciReadBits (TempAddress, 15, 8, &Temp, StdHeader);
+ } else {
+ // We are starting on a new list
+ TempAddress.AddressValue = Base.AddressValue + 0x34;
+ LibAmdPciReadBits (TempAddress, 7, 0, &Temp, StdHeader);
+ }
+
+ if (Temp == 0) {
+ return; // We have reached the end of the capabilities list
+ }
+
+ // Error detection and recovery- The statement below protects against
+ // PCI devices with broken PCI capabilities lists. Detect a pointer
+ // that is not uint32 aligned, points into the first 64 reserved DWORDs
+ // or points back to itself.
+ if (((Temp & 3) != 0) || (Temp == Offset) || (Temp < 0x40)) {
+ ASSERT (FALSE);
+ return;
+ }
+
+ Address->AddressValue = Base.AddressValue + Temp;
+ return;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set memory with value
+ *
+ *
+ * @param[in,out] Destination Pointer to memory range
+ * @param[in] Value Value to set memory with
+ * @param[in] FillLength Size of the memory range
+ * @param[in] StdHeader Standard configuration header (Optional)
+ */
+VOID
+LibAmdMemFill (
+ IN VOID *Destination,
+ IN UINT8 Value,
+ IN UINTN FillLength,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *Dest;
+ ASSERT (StdHeader != NULL);
+ Dest = Destination;
+ while ((FillLength--) != 0) {
+ *Dest++ = Value;
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Copy memory
+ *
+ *
+ * @param[in,out] Destination Pointer to destination buffer
+ * @param[in] Source Pointer to source buffer
+ * @param[in] CopyLength buffer length
+ * @param[in] StdHeader Standard configuration header (Optional)
+ */
+VOID
+LibAmdMemCopy (
+ IN VOID *Destination,
+ IN VOID *Source,
+ IN UINTN CopyLength,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *Dest;
+ UINT8 *SourcePtr;
+ ASSERT (StdHeader != NULL);
+ Dest = Destination;
+ SourcePtr = Source;
+ while ((CopyLength--) != 0) {
+ *Dest++ = *SourcePtr++;
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Verify checksum of binary image (B1/B2/B3)
+ *
+ *
+ * @param[in] ImagePtr Pointer to image start
+ * @retval TRUE Checksum valid
+ * @retval FALSE Checksum invalid
+ */
+BOOLEAN
+LibAmdVerifyImageChecksum (
+ IN VOID *ImagePtr
+ )
+{
+ // Assume ImagePtr points to the binary start ($AMD)
+ // Checksum is on an even boundary in AMD_IMAGE_HEADER
+
+ UINT16 Sum;
+ UINT32 i;
+
+ Sum = 0;
+
+ i = ((AMD_IMAGE_HEADER*) ImagePtr)->ImageSize;
+
+ while (i > 1) {
+ Sum = Sum + *((UINT16 *)ImagePtr);
+ ImagePtr = (VOID *) ((UINT8 *)ImagePtr + 2);
+ i = i - 2;
+ }
+ if (i > 0) {
+ Sum = Sum + *((UINT8 *) ImagePtr);
+ }
+
+ return (Sum == 0)?TRUE:FALSE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Locate AMD binary image that contain specific module
+ *
+ *
+ * @param[in] StartAddress Pointer to start range
+ * @param[in] EndAddress Pointer to end range
+ * @param[in] Alignment Image address alignment
+ * @param[in] ModuleSignature Module signature.
+ * @retval NULL if image not found
+ * @retval pointer to image header
+ */
+VOID *
+LibAmdLocateImage (
+ IN VOID *StartAddress,
+ IN VOID *EndAddress,
+ IN UINT32 Alignment,
+ IN CHAR8 ModuleSignature[8]
+ )
+
+{
+ UINT8 *CurrentPtr;
+ AMD_MODULE_HEADER *ModuleHeaderPtr;
+ UINT64 *SearchStr;
+ UINT64 *InputStr;
+
+ CurrentPtr = StartAddress;
+ InputStr = (UINT64 *)ModuleSignature;
+
+ // Search from start to end incrementing by alignment
+ while ((CurrentPtr >= (UINT8 *) StartAddress) && (CurrentPtr < (UINT8 *) EndAddress)) {
+ // First find a binary image
+ if (*((UINT32 *) CurrentPtr) == IMAGE_SIGNATURE) {
+ if (LibAmdVerifyImageChecksum (CurrentPtr)) {
+ // If we have a valid image, search module linked list for a match
+ ModuleHeaderPtr = (AMD_MODULE_HEADER*) ((UINT8 *)CurrentPtr + ((AMD_IMAGE_HEADER *) CurrentPtr)->ModuleInfoOffset);
+ while (ModuleHeaderPtr != NULL) {
+ SearchStr = (UINT64 *)&ModuleHeaderPtr->ModuleIdentifier;
+ if (*InputStr == *SearchStr) {
+ return CurrentPtr;
+ }
+ ModuleHeaderPtr = (AMD_MODULE_HEADER *)ModuleHeaderPtr->NextBlock;
+ }
+ }
+ }
+ CurrentPtr += Alignment;
+ }
+ return NULL;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the package type mask for the processor
+ *
+ *
+ * @param[in] StdHeader Standard configuration header (Optional)
+ */
+
+// Returns the package type mask for the processor
+UINT32
+LibAmdGetPackageType (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 ProcessorPackageType;
+ CPUID_DATA CpuId;
+
+ LibAmdCpuidRead (0x80000001, &CpuId, StdHeader);
+ ProcessorPackageType = (UINT32) (CpuId.EBX_Reg >> 28) & 0xF; // bit 31:28
+ return (UINT32) (1 << ProcessorPackageType);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the package type mask for the processor
+ *
+ *
+ * @param[in] AccessWidth Access width
+ * @param[in] Data data
+ * @param[in] DataMask data
+ * @param[out] TemData typecast data
+ * @param[out] TempDataMask typecast data
+ */
+
+VOID
+STATIC
+LibAmdGetDataFromPtr (
+ IN ACCESS_WIDTH AccessWidth,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ OUT UINT32 *TemData,
+ OUT UINT32 *TempDataMask
+ )
+{
+ switch (AccessWidth) {
+ case AccessWidth8:
+ case AccessS3SaveWidth8:
+ *TemData = (UINT32)*(UINT8 *) Data;
+ *TempDataMask = (UINT32)*(UINT8 *) DataMask;
+ break;
+ case AccessWidth16:
+ case AccessS3SaveWidth16:
+ *TemData = (UINT32)*(UINT16 *) Data;
+ *TempDataMask = (UINT32)*(UINT16 *) DataMask;
+ break;
+ case AccessWidth32:
+ case AccessS3SaveWidth32:
+ *TemData = *(UINT32 *) Data;
+ *TempDataMask = *(UINT32 *) DataMask;
+ break;
+ default:
+ IDS_ERROR_TRAP;
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the package type mask for the processor
+ *
+ *
+ * @param[in] AccessWidth Access width
+ * @retval Width in number of bytes
+ */
+
+UINT8
+LibAmdAccessWidth (
+ IN ACCESS_WIDTH AccessWidth
+ )
+{
+ UINT8 Width;
+
+ switch (AccessWidth) {
+ case AccessWidth8:
+ case AccessS3SaveWidth8:
+ Width = 1;
+ break;
+ case AccessWidth16:
+ case AccessS3SaveWidth16:
+ Width = 2;
+ break;
+ case AccessWidth32:
+ case AccessS3SaveWidth32:
+ Width = 4;
+ break;
+ case AccessWidth64:
+ case AccessS3SaveWidth64:
+ Width = 8;
+ break;
+ default:
+ Width = 0;
+ IDS_ERROR_TRAP;
+ }
+ return Width;
+}
+
+VOID
+CpuidRead (
+ IN UINT32 CpuidFcnAddress,
+ OUT CPUID_DATA *Value
+ )
+{
+ __cpuid ((int *)Value, CpuidFcnAddress);
+}
+
+UINT8
+ReadNumberOfCpuCores(
+ VOID
+ )
+{
+ CPUID_DATA Value;
+ CpuidRead (0x80000008, &Value);
+ return Value.ECX_Reg & 0xff;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Lib/amdlib.h b/src/vendorcode/amd/agesa/f16kb/Lib/amdlib.h
new file mode 100644
index 0000000..7ddcbd0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Lib/amdlib.h
@@ -0,0 +1,384 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Library
+ *
+ * Contains interface to the AMD AGESA library
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Lib
+ * @e \$Revision: 85030 $ @e \$Date: 2012-12-26 00:20:10 -0600 (Wed, 26 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ **/
+
+#ifndef _AMD_LIB_H_
+#define _AMD_LIB_H_
+
+#define IOCF8 0xCF8
+#define IOCFC 0xCFC
+
+// Reg Values for ReadCpuReg and WriteCpuReg
+#define CR4_REG 0x04
+#define DR0_REG 0x10
+#define DR1_REG 0x11
+#define DR2_REG 0x12
+#define DR3_REG 0x13
+#define DR7_REG 0x17
+
+// PROTOTYPES FOR amdlib32.asm
+UINT8
+ReadIo8 (
+ IN UINT16 Address
+ );
+
+UINT16
+ReadIo16 (
+ IN UINT16 Address
+ );
+
+UINT32
+ReadIo32 (
+ IN UINT16 Address
+ );
+
+VOID
+WriteIo8 (
+ IN UINT16 Address,
+ IN UINT8 Data
+ );
+
+VOID
+WriteIo16 (
+ IN UINT16 Address,
+ IN UINT16 Data
+ );
+
+VOID
+WriteIo32 (
+ IN UINT16 Address,
+ IN UINT32 Data
+ );
+
+UINT8
+Read64Mem8 (
+ IN UINT64 Address
+ );
+
+UINT16
+Read64Mem16 (
+ IN UINT64 Address
+ );
+
+UINT32
+Read64Mem32 (
+ IN UINT64 Address
+ );
+
+VOID
+Write64Mem8 (
+ IN UINT64 Address,
+ IN UINT8 Data
+ );
+
+VOID
+Write64Mem16 (
+ IN UINT64 Address,
+ IN UINT16 Data
+ );
+
+VOID
+Write64Mem32 (
+ IN UINT64 Address,
+ IN UINT32 Data
+ );
+
+UINT64
+ReadTSC (
+ VOID);
+
+// MSR
+VOID
+LibAmdMsrRead (
+ IN UINT32 MsrAddress,
+ OUT UINT64 *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdMsrWrite (
+ IN UINT32 MsrAddress,
+ IN UINT64 *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+// IO
+VOID
+LibAmdIoRead (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT16 IoAddress,
+ OUT VOID *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdIoWrite (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT16 IoAddress,
+ IN VOID *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdIoRMW (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT16 IoAddress,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdIoPoll (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT16 IoAddress,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN UINT64 Delay,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+// Memory or MMIO
+VOID
+LibAmdMemRead (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT64 MemAddress,
+ OUT VOID *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdMemWrite (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT64 MemAddress,
+ IN VOID *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdMemRMW (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT64 MemAddress,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdMemPoll (
+ IN ACCESS_WIDTH AccessWidth,
+ IN UINT64 MemAddress,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN UINT64 Delay,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+// PCI
+VOID
+LibAmdPciRead (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR PciAddress,
+ OUT VOID *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdPciWrite (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR PciAddress,
+ IN VOID *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdPciRMW (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR PciAddress,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdPciPoll (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR PciAddress,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN UINT64 Delay,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdPciReadBits (
+ IN PCI_ADDR Address,
+ IN UINT8 Highbit,
+ IN UINT8 Lowbit,
+ OUT UINT32 *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdPciWriteBits (
+ IN PCI_ADDR Address,
+ IN UINT8 Highbit,
+ IN UINT8 Lowbit,
+ IN UINT32 *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdPciFindNextCap (
+ IN OUT PCI_ADDR *Address,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+// CPUID
+VOID
+LibAmdCpuidRead (
+ IN UINT32 CpuidFcnAddress,
+ OUT CPUID_DATA *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+// Utility Functions
+VOID
+LibAmdMemFill (
+ IN VOID *Destination,
+ IN UINT8 Value,
+ IN UINTN FillLength,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LibAmdMemCopy (
+ IN VOID *Destination,
+ IN VOID *Source,
+ IN UINTN CopyLength,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID *
+LibAmdLocateImage (
+ IN VOID *StartAddress,
+ IN VOID *EndAddress,
+ IN UINT32 Alignment,
+ IN CHAR8 ModuleSignature[8]
+ );
+
+UINT32
+LibAmdGetPackageType (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+LibAmdVerifyImageChecksum (
+ IN VOID *ImagePtr
+ );
+
+UINT8
+LibAmdBitScanReverse (
+ IN UINT32 value
+ );
+UINT8
+LibAmdBitScanForward (
+ IN UINT32 value
+ );
+
+VOID
+LibAmdReadCpuReg (
+ IN UINT8 RegNum,
+ OUT UINT32 *Value
+ );
+VOID
+LibAmdWriteCpuReg (
+ IN UINT8 RegNum,
+ IN UINT32 Value
+ );
+
+VOID
+LibAmdWriteBackInvalidateCache (
+ IN VOID
+ );
+
+VOID
+LibAmdSimNowEnterDebugger (VOID);
+
+VOID
+LibAmdHDTBreakPoint (VOID);
+
+UINT8
+LibAmdAccessWidth (
+ IN ACCESS_WIDTH AccessWidth
+ );
+
+VOID
+LibAmdCLFlush (
+ IN UINT64 Address,
+ IN UINT8 Count
+ );
+
+VOID
+StopHere (
+ VOID
+ );
+
+VOID
+LibAmdFinit (
+ VOID);
+
+VOID
+LibAmdFnclex (
+ VOID);
+
+VOID
+LibAmdReadMxcsr (
+ OUT UINT32 *Value
+ );
+VOID
+LibAmdWriteMxcsr (
+ IN UINT32 *Value
+ );
+
+#endif // _AMD_LIB_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Lib/helper.c b/src/vendorcode/amd/agesa/f16kb/Lib/helper.c
new file mode 100644
index 0000000..2c5de90
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Lib/helper.c
@@ -0,0 +1,68 @@
+/*
+ *****************************************************************************
+ *
+ * Copyright (c) 2011, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+// helper.c - these functions are compiled separately because they redefine
+// functions invoked directly by the compiler code generator.
+// The Microsoft tools do not allow such functions to be compiled
+// with the "Enable link-time code generation (/GL)" option. Compile
+// this module without /GL to avoid a build failure LNK1237.
+//
+
+#if defined (_MSC_VER)
+
+#include "Porting.h"
+
+//---------------------------------------------------------------------------
+void *memcpy (void *dest, const void *src, size_t bytes)
+ {
+ // Rep movsb is faster than a byte loop, but still quite slow
+ // for large operations. However, it is a good choice here because
+ // this function is intended for use by the compiler only. For
+ // large copy operations, call LibAmdMemCopy.
+ __movsb (dest, src, bytes);
+ return dest;
+ }
+
+//---------------------------------------------------------------------------
+
+void *memset (void *dest, int value, size_t bytes)
+ {
+ // Rep stosb is faster than a byte loop, but still quite slow
+ // for large operations. However, it is a good choice here because
+ // this function is intended for use by the compiler only. For
+ // large fill operations, call LibAmdMemFill.
+ __stosb (dest, value, bytes);
+ return dest;
+ }
+//---------------------------------------------------------------------------
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Makefile.inc b/src/vendorcode/amd/agesa/f16kb/Makefile.inc
new file mode 100644
index 0000000..0e68895
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Makefile.inc
@@ -0,0 +1,102 @@
+#*****************************************************************************
+#
+# Copyright (c) 2012, Advanced Micro Devices, Inc.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# * Neither the name of Advanced Micro Devices, Inc. nor the names of
+# its contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#*****************************************************************************
+
+# AGESA V5 Files
+AGESA_ROOT = src/vendorcode/amd/agesa/f16kb
+
+AGESA_INC = -Isrc/mainboard/$(MAINBOARDDIR)
+AGESA_INC += -I$(AGESA_ROOT)
+AGESA_INC += -I$(AGESA_ROOT)/Include
+AGESA_INC += -I$(AGESA_ROOT)/Lib
+AGESA_INC += -I$(AGESA_ROOT)/Legacy
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Common
+AGESA_INC += -I$(AGESA_ROOT)/Proc/HT
+AGESA_INC += -I$(AGESA_ROOT)/Proc/CPU
+AGESA_INC += -I$(AGESA_ROOT)/Proc/CPU/Feature
+AGESA_INC += -I$(AGESA_ROOT)/Proc/CPU/Family
+AGESA_INC += -I$(AGESA_ROOT)/Proc/CPU/Family/0x16
+AGESA_INC += -I$(AGESA_ROOT)/Proc/CPU/Family/0x16/KB
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/NB/KB
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Family
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Family/0x16
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Common
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Nb
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Nb/Family
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Nb/Family/0x16
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Nb/Feature
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/PCIe
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/PCIe/Family
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/PCIe/Family/0x16
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/PCIe/Feature
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Gfx
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Gfx/Family
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbGfxConfig
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbPcieConfig
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbGfxInitLibV1
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbPcieInitLibV1
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbNbInitLibV1
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbInitKB
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbSbLib
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbPcieTrainingV1
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Family/0x16/KB
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbCommonLib
+AGESA_INC += -I$(AGESA_ROOT)/Proc/HT/NbCommon
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/Main
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Library
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbNbInitLibV4
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbIommuIvrs
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbIvrsLib
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbSbIommuLib
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbTable
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbPcieInitLibV4
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Fch
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Fch/Common
+AGESA_INC += -I$(AGESA_ROOT)/Proc/IDS/Debug
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbPcieAspm
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Include/Library
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbSmuLibV7
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbNbInitLibV5
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbPcieTrainingV2
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbPcieInitLibV5
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/Feat/CRAT
+AGESA_INC += -I$(AGESA_ROOT)/Proc/GNB/Modules/GnbGfxIntTableV3
+AGESA_INC += -I$(AGESA_ROOT)/Proc/Mem/Feat/RDWR2DTRAINING
+
+AGESA_INC += -I$(src)/southbridge/amd/agesa/hudson
+
+AGESA_CFLAGS =-march=k8-sse3 -mtune=k8-sse3 -fno-zero-initialized-in-bss -fno-strict-aliasing
+
+export AGESA_ROOT := $(AGESA_ROOT)
+export AGESA_INC := $(AGESA_INC)
+export AGESA_CFLAGS := $(AGESA_CFLAGS)
+CC := $(CC) $(AGESA_INC) $(AGESA_CFLAGS)
+#######################################################################
diff --git a/src/vendorcode/amd/agesa/f16kb/Porting.h b/src/vendorcode/amd/agesa/f16kb/Porting.h
new file mode 100644
index 0000000..da78fb8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Porting.h
@@ -0,0 +1,282 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Describes compiler dependencies - to support several compile time environments
+ *
+ * Contains compiler environment porting descriptions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Includes
+ * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 03:16:51 -0600 (Wed, 22 Dec 2010) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _PORTING_H_
+#define _PORTING_H_
+
+#if defined (_MSC_VER)
+ #include <intrin.h>
+ void _disable (void);
+ void _enable (void);
+ #pragma warning(disable: 4103 4001 4733)
+ #pragma intrinsic (_disable, _enable)
+ #pragma warning(push)
+ // -----------------------------------------------------------------------
+ // Define a code_seg MACRO
+ //
+ #define MAKE_AS_A_STRING(arg) #arg
+
+ #define CODE_GROUP(arg) __pragma (code_seg (MAKE_AS_A_STRING (.t##arg)))
+
+ #define RDATA_GROUP(arg) __pragma (const_seg (MAKE_AS_A_STRING (.d##arg)))
+ #define FUNC_ATTRIBUTE(arg) __declspec(arg)
+ //#include <intrin.h> // MS has built-in functions
+
+ #if _MSC_VER < 900
+ // -----------------------------------------------------------------------
+ // Assume MSVC 1.52C (16-bit)
+ //
+ // NOTE: When using MSVC 1.52C use the following command line:
+ //
+ // CL.EXE /G3 /AL /O1i /Fa <FILENAME.C>
+ //
+ // This will produce 32-bit code in USE16 segment that is optimized for code
+ // size.
+ typedef void VOID;
+
+ // Create the universal 32, 16, and 8-bit data types
+ typedef unsigned long UINTN;
+ typedef long INT32;
+ typedef unsigned long UINT32;
+ typedef int INT16;
+ typedef unsigned int UINT16;
+ typedef char INT8;
+ typedef unsigned char UINT8;
+ typedef char CHAR8;
+ typedef unsigned short CHAR16;
+
+ /// struct for 16-bit environment handling of 64-bit value
+ typedef struct _UINT64 {
+ IN OUT UINT32 lo; ///< lower 32-bits of 64-bit value
+ IN OUT UINT32 hi; ///< highest 32-bits of 64-bit value
+ } UINT64;
+
+ // Create the Boolean type
+ #define TRUE 1
+ #define FALSE 0
+ typedef unsigned char BOOLEAN;
+
+ #define CONST const
+ #define STATIC static
+ #define VOLATILE volatile
+ #define CALLCONV __pascal
+ #define ROMDATA __based( __segname( "_CODE" ) )
+ #define _16BYTE_ALIGN __declspec(align(16))
+
+ // Force tight packing of structures
+ // Note: Entire AGESA (Project / Solution) will be using pragma pack 1
+ #pragma warning( disable : 4103 ) // Disable '#pragma pack' in .h warning
+ #pragma pack(1)
+
+ // Disable WORD->BYTE automatic conversion warnings. Example:
+ // BYTE LocalByte;
+ // void MyFunc(BYTE val);
+ //
+ // MyFunc(LocalByte*2+1); // Warning, automatic conversion
+ //
+ // The problem is any time math is performed on a BYTE, it is converted to a
+ // WORD by MSVC 1.52c, and then when it is converted back to a BYTE, a warning
+ // is generated. Disable warning C4761
+ #pragma warning( disable : 4761 )
+
+ #else
+ // -----------------------------------------------------------------------
+ // Assume a 32-bit MSVC++
+ //
+ // Disable the following warnings:
+ // 4100 - 'identifier' : unreferenced formal parameter
+ // 4276 - 'function' : no prototype provided; assumed no parameters
+ // 4214 - non standard extension used : bit field types other than int
+ // 4001 - nonstandard extension 'single line comment' was used
+ // 4142 - benign redefinition of type for following declaration
+ // - typedef char INT8
+ #if defined (_M_IX86)
+ #pragma warning (disable: 4100 4276 4214 4001 4142 4305 4306)
+
+ #ifndef VOID
+ typedef void VOID;
+ #endif
+ // Create the universal 32, 16, and 8-bit data types
+ #ifndef UINTN
+ typedef unsigned __w64 UINTN;
+ #endif
+ typedef __int64 INT64;
+ typedef unsigned __int64 UINT64;
+ typedef int INT32;
+ typedef unsigned int UINT32;
+ typedef short INT16;
+ typedef unsigned short UINT16;
+ typedef char INT8;
+ typedef unsigned char UINT8;
+ typedef char CHAR8;
+ typedef unsigned short CHAR16;
+
+ // Create the Boolean type
+ #ifndef TRUE
+ #define TRUE 1
+ #endif
+ #ifndef FALSE
+ #define FALSE 0
+ #endif
+ typedef unsigned char BOOLEAN;
+
+ // Force tight packing of structures
+ // Note: Entire AGESA (Project / Solution) will be using pragma pack 1
+ #pragma pack(1)
+
+ #define CONST const
+ #define STATIC static
+ #define VOLATILE volatile
+ #define CALLCONV
+ #define ROMDATA
+ #define _16BYTE_ALIGN __declspec(align(64))
+ // 64 bit of compiler
+ #else
+ #pragma warning (disable: 4100 4276 4214 4001 4142 4305 4306 4366)
+
+ #ifndef VOID
+ typedef void VOID;
+ #endif
+ // Create the universal 32, 16, and 8-bit data types
+ #ifndef UINTN
+ typedef unsigned __int64 UINTN;
+ #endif
+ typedef __int64 INT64;
+ typedef unsigned __int64 UINT64;
+ typedef int INT32;
+ typedef unsigned int UINT32;
+ typedef short INT16;
+ typedef unsigned short UINT16;
+ typedef char INT8;
+ typedef unsigned char UINT8;
+ typedef char CHAR8;
+ typedef unsigned short CHAR16;
+
+ // Create the Boolean type
+ #ifndef TRUE
+ #define TRUE 1
+ #endif
+ #ifndef FALSE
+ #define FALSE 0
+ #endif
+ typedef unsigned char BOOLEAN;
+
+ // Force tight packing of structures
+ // Note: Entire AGESA (Project / Solution) will be using pragma pack 1
+ #pragma pack(1)
+
+ #define CONST const
+ #define STATIC static
+ #define VOLATILE volatile
+ #define CALLCONV
+ #define ROMDATA
+ #endif
+ #endif
+ // -----------------------------------------------------------------------
+ // End of MS compiler versions
+
+#elif defined __GNUC__
+
+ #define IN
+ #define OUT
+ #define STATIC static
+ #define VOLATILE volatile
+ #define TRUE 1
+ #define FALSE 0
+// #undef CONST
+ #define CONST const
+ #define ROMDATA
+ #define CALLCONV
+ #define _16BYTE_ALIGN __attribute__ ((aligned (16)))
+
+ typedef unsigned char BOOLEAN;
+ typedef signed char INT8;
+ typedef signed short INT16;
+ typedef signed long INT32;
+ typedef char CHAR8;
+ typedef unsigned char UINT8;
+ typedef unsigned short UINT16;
+ typedef unsigned long UINT32;
+ typedef unsigned long UINTN;
+ typedef unsigned long long UINT64;
+ typedef long long INT64;
+ typedef void VOID;
+ //typedef unsigned long size_t;
+
+ //#include <intrin.h> // MingW-w64 library header
+#pragma pack(1)
+
+#define CODE_GROUP(arg)
+#define RDATA_GROUP(arg)
+
+#define FUNC_ATTRIBUTE(arg) __attribute__((arg))
+#define MAKE_AS_A_STRING(arg) #arg
+#include <stddef.h>
+#include "gcc-intrin.h"
+
+#include <assert.h>
+#include <console/console.h>
+#include <console/loglevel.h>
+
+#ifndef NULL
+ #define NULL (void *)0
+#endif
+
+#else
+ // -----------------------------------------------------------------------
+ // Unknown or unsupported compiler
+ //
+ #error "Unknown compiler in use"
+#endif
+
+// -----------------------------------------------------------------------
+// Common definitions for all compilers
+//
+
+//Support forward reference construct
+#define AGESA_FORWARD_DECLARATION(x) typedef struct _##x x
+
+// The following are use in conformance to the UEFI style guide
+#define IN
+#define OUT
+
+#endif // _PORTING_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbC6State.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbC6State.c
new file mode 100644
index 0000000..b923fec
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbC6State.c
@@ -0,0 +1,198 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini C6 C-state feature support functions.
+ *
+ * Provides the functions necessary to initialize the C6 feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/F16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFeatures.h"
+#include "cpuC6State.h"
+#include "cpuApicUtilities.h"
+#include "cpuF16PowerMgmt.h"
+#include "F16KbPowerMgmt.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBC6STATE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+F16KbIsC6Supported (
+ IN C6_FAMILY_SERVICES *C6Services,
+ IN UINT32 Socket,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+STATIC
+F16KbInitializeC6 (
+ IN C6_FAMILY_SERVICES *C6Services,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Is C6 supported on this CPU
+ *
+ * @param[in] C6Services Pointer to this CPU's C6 family services.
+ * @param[in] Socket This core's zero-based socket number.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE C6 state is supported.
+ * @retval FALSE C6 state is not supported.
+ *
+ */
+BOOLEAN
+STATIC
+F16KbIsC6Supported (
+ IN C6_FAMILY_SERVICES *C6Services,
+ IN UINT32 Socket,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return (IsFeatureEnabled (IoCstate, PlatformConfig, StdHeader));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Enable C6 on a family 16h Kabini CPU.
+ *
+ * @param[in] C6Services Pointer to this CPU's C6 family services.
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return AGESA_SUCCESS Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F16KbInitializeC6 (
+ IN C6_FAMILY_SERVICES *C6Services,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+ CSTATE_CTRL1_REGISTER CstateCtrl1;
+ POPUP_PSTATE_REGISTER PopDownPstate;
+ CLK_PWR_TIMING_CTRL2_REGISTER ClkPwrTimingCtrl2;
+
+ if ((EntryPoint & CPU_FEAT_AFTER_PM_INIT) != 0) {
+ // Initialize F4x118
+ PciAddress.AddressValue = CSTATE_CTRL1_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &CstateCtrl1, StdHeader);
+ // Set C-state Action Field 0
+ // bits[8] PwrGateEnCstAct0 = 0x1
+ // bits[9] PwrOffEnCstAct0 = 0x1
+ CstateCtrl1.PwrGateEnCstAct0 = 1;
+ CstateCtrl1.PwrOffEnCstAct0 = 1;
+ // Set C-state Action Field 1
+ // bits[24] PwrGateEnCstAct1 = 0x1
+ // bits[25] PwrOffEnCstAct1 = 0x1
+ CstateCtrl1.PwrGateEnCstAct1 = 1;
+ CstateCtrl1.PwrOffEnCstAct1 = 1;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &CstateCtrl1, StdHeader);
+
+ // Initialize F3xA8[PopDownPstate] = F3xDC[HwPstateMaxVal]
+ PciAddress.AddressValue = CPTC2_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &ClkPwrTimingCtrl2, StdHeader);
+ PciAddress.AddressValue = POPUP_PSTATE_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &PopDownPstate, StdHeader);
+ PopDownPstate.PopDownPstate = ClkPwrTimingCtrl2.HwPstateMaxVal;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PopDownPstate, StdHeader);
+ } else if ((EntryPoint & (CPU_FEAT_AFTER_RESUME_MTRR_SYNC | CPU_FEAT_BEFORE_RELINQUISH_AP)) != 0) {
+ // Initialize F4x118
+ PciAddress.AddressValue = CSTATE_CTRL1_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &CstateCtrl1, StdHeader);
+ // Set C-state Action Field 0
+ // bits[1] CacheFlushEnCstAct0 = 0x1
+ CstateCtrl1.CacheFlushEnCstAct0 = 1;
+ // Set C-state Action Field 1
+ // bits[17] CacheFlushEnCstAct1 = 0x1
+ CstateCtrl1.CacheFlushEnCstAct1 = 1;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &CstateCtrl1, StdHeader);
+ }
+ return AGESA_SUCCESS;
+}
+
+CONST C6_FAMILY_SERVICES ROMDATA F16KbC6Support =
+{
+ 0,
+ F16KbIsC6Supported,
+ F16KbInitializeC6,
+ ReloadMicrocodePatchAfterMemInit
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbCacheFlushOnHalt.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbCacheFlushOnHalt.c
new file mode 100644
index 0000000..95c3a5a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbCacheFlushOnHalt.c
@@ -0,0 +1,150 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Cache Flush On Halt Function for Family 16h Kabini.
+ *
+ * Contains code to initialize Cache Flush On Halt feature for Family 16h Kabini.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPostInit.h"
+#include "cpuF16PowerMgmt.h"
+#include "F16KbPowerMgmt.h"
+#include "cpuFeatures.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBCACHEFLUSHONHALT_FILECODE
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+SetF16KbCacheFlushOnHaltRegister (
+ IN CPU_CFOH_FAMILY_SERVICES *FamilySpecificServices,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * P U B L I C F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * Enable Cpu Cache Flush On Halt Function
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ */
+VOID
+SetF16KbCacheFlushOnHaltRegister (
+ IN CPU_CFOH_FAMILY_SERVICES *FamilySpecificServices,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+ CSTATE_CTRL1_REGISTER CstateCtrl1;
+
+ if ((EntryPoint & (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC)) != 0) {
+ // Set F4x118
+ PciAddress.AddressValue = CSTATE_CTRL1_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &CstateCtrl1, StdHeader);
+ // Set C-state Action Field 0
+ // bits[11] NbClkGate0 = 0x1
+ // bits[12] SelfRefr0 = 0x1
+ CstateCtrl1.NbClkGate0 = 1;
+ CstateCtrl1.SelfRefr0 = 1;
+ // Set C-state Action Field 1
+ // bits[27] NbClkGate1 = 0x1
+ // bits[28] SelfRefr1 = 0x1
+ CstateCtrl1.NbClkGate1 = 1;
+ CstateCtrl1.SelfRefr1 = 1;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &CstateCtrl1, StdHeader);
+
+ //Override the default setting
+ IDS_OPTION_HOOK (IDS_CACHE_FLUSH_HLT, NULL, StdHeader);
+ }
+
+}
+
+CONST CPU_CFOH_FAMILY_SERVICES ROMDATA F16KbCacheFlushOnHalt =
+{
+ 0,
+ SetF16KbCacheFlushOnHaltRegister
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbCoreAfterReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbCoreAfterReset.c
new file mode 100644
index 0000000..0ae46c6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbCoreAfterReset.c
@@ -0,0 +1,250 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini after warm reset sequence for core P-states
+ *
+ * Performs the "Core Minimum P-State Transition Sequence After Warm Reset"
+ * as described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuF16PowerMgmt.h"
+#include "F16KbPowerMgmt.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "F16KbCoreAfterReset.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBCOREAFTERRESET_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F16KbPmCoreAfterResetPhase1OnCore (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+F16KbPmCoreAfterResetPhase2OnCore (
+ IN VOID *HwPsMaxVal,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 16h Kabini core 0 entry point for performing the necessary steps for core
+ * P-states after a warm reset has occurred.
+ *
+ * The steps are as follows:
+ * 1. Write 0 to MSRC001_0062[PstateCmd] on all cores in the processor.
+ * 2. Wait for MSRC001_0071[CurCpuFid, CurCpuDid] = [CpuFid, CpuDid] from
+ * MSRC001_00[6B:64] indexed by MSRC001_0071[CurPstateLimit].
+ * 3. Write MSRC001_0061[PstateMaxVal] to MSRC001_0062[PstateCmd] on all
+ * cores in the processor.
+ * 4. Wait for MSRC001_0071[CurCpuFid, CurCpuDid] = [CpuFid, CpuDid] from
+ * MSRC001_00[6B:64] indexed by MSRC001_0061[PstateMaxVal].
+ * 5. If MSRC001_0071[CurPstateLimit] != MSRC001_0071[CurPstate], wait for
+ * MSRC001_0071[CurCpuVid] = [CpuVid] from MSRC001_00[6B:64] indexed by
+ * MSRC001_0061[PstateMaxVal].
+ * 6. Wait for MSRC001_0063[CurPstate] = MSRC001_0062[PstateCmd].
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] CpuEarlyParamsPtr Service parameters
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+F16KbPmCoreAfterReset (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Core;
+ UINT32 HwPsMaxVal;
+ PCI_ADDR PciAddress;
+ AP_TASK TaskPtr;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbPmCoreAfterReset\n");
+
+ GetCurrentCore (&Core, StdHeader);
+ ASSERT (Core == 0);
+
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 24, FUNC_3, CPTC2_REG);
+ LibAmdPciRead (AccessWidth32, PciAddress, &HwPsMaxVal, StdHeader);
+ HwPsMaxVal = ((CLK_PWR_TIMING_CTRL2_REGISTER *) &HwPsMaxVal)->HwPstateMaxVal;
+
+ // Launch each local core to perform steps 1 through 3.
+ TaskPtr.FuncAddress.PfApTask = F16KbPmCoreAfterResetPhase1OnCore;
+ TaskPtr.DataTransfer.DataSizeInDwords = 0;
+ TaskPtr.ExeFlags = WAIT_FOR_CORE;
+ ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+
+ // Launch each local core to perform steps 4 through 6.
+ TaskPtr.FuncAddress.PfApTaskI = F16KbPmCoreAfterResetPhase2OnCore;
+ TaskPtr.DataTransfer.DataSizeInDwords = 1;
+ TaskPtr.DataTransfer.DataPtr = &HwPsMaxVal;
+ TaskPtr.DataTransfer.DataTransferFlags = 0;
+ TaskPtr.ExeFlags = WAIT_FOR_CORE;
+ ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+}
+
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F16KbPmCoreAfterReset to perform MSR initialization on all
+ * cores of a family 16h socket.
+ *
+ * This function implements steps 1 - 3 on each core.
+ *
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F16KbPmCoreAfterResetPhase1OnCore (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 CofvidSts;
+ UINT64 LocalMsrRegister;
+ UINT64 PstateCtrl;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbPmCoreAfterResetPhase1OnCore\n");
+
+ // 1. Write 0 to MSRC001_0062[PstateCmd] on all cores in the processor.
+ PstateCtrl = 0;
+ LibAmdMsrWrite (MSR_PSTATE_CTL, &PstateCtrl, StdHeader);
+
+ // 2. Wait for MSRC001_0071[CurCpuFid, CurCpuDid] = [CpuFid, CpuDid] from
+ // MSRC001_00[6B:64] indexed by MSRC001_0071[CurPstateLimit].
+ do {
+ LibAmdMsrRead (MSR_COFVID_STS, &CofvidSts, StdHeader);
+ LibAmdMsrRead ((UINT32) (MSR_PSTATE_0 + (UINT32) (((COFVID_STS_MSR *) &CofvidSts)->CurPstateLimit)), &LocalMsrRegister, StdHeader);
+ } while ((((COFVID_STS_MSR *) &CofvidSts)->CurCpuFid != ((PSTATE_MSR *) &LocalMsrRegister)->CpuFid) ||
+ (((COFVID_STS_MSR *) &CofvidSts)->CurCpuDid != ((PSTATE_MSR *) &LocalMsrRegister)->CpuDid));
+
+ // 3. Write MSRC001_0061[PstateMaxVal] to MSRC001_0062[PstateCmd] on all
+ // cores in the processor.
+ LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &LocalMsrRegister, StdHeader);
+ ((PSTATE_CTRL_MSR *) &PstateCtrl)->PstateCmd = ((PSTATE_CURLIM_MSR *) &LocalMsrRegister)->PstateMaxVal;
+ LibAmdMsrWrite (MSR_PSTATE_CTL, &PstateCtrl, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F16KbPmCoreAfterReset to perform MSR initialization on all
+ * cores of a family 16h socket.
+ *
+ * This function implements steps 4 - 6 on each core.
+ *
+ * @param[in] HwPsMaxVal Index of the highest enabled HW P-state.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F16KbPmCoreAfterResetPhase2OnCore (
+ IN VOID *HwPsMaxVal,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 TargetPsMsr;
+ UINT64 LocalMsrRegister;
+ UINT64 PstateCtrl;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbPmCoreAfterResetPhase2OnCore\n");
+
+ // 4. Wait for MSRC001_0071[CurCpuFid, CurCpuDid] = [CpuFid, CpuDid] from
+ // MSRC001_00[6B:64] indexed by D18F3xDC[PstateMaxVal].
+ LibAmdMsrRead ((*(UINT32 *) HwPsMaxVal) + MSR_PSTATE_0, &TargetPsMsr, StdHeader);
+ do {
+ LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+ } while ((((COFVID_STS_MSR *) &LocalMsrRegister)->CurCpuFid != ((PSTATE_MSR *) &TargetPsMsr)->CpuFid) ||
+ (((COFVID_STS_MSR *) &LocalMsrRegister)->CurCpuDid != ((PSTATE_MSR *) &TargetPsMsr)->CpuDid));
+
+ // 5. If MSRC001_0071[CurPstateLimit] != MSRC001_0071[CurPstate], wait for
+ // MSRC001_0071[CurCpuVid] = [CpuVid] from MSRC001_00[6B:64] indexed by
+ // MSRC001_0061[PstateMaxVal].
+ if (((COFVID_STS_MSR *) &LocalMsrRegister)->CurPstateLimit != ((COFVID_STS_MSR *) &LocalMsrRegister)->CurPstate) {
+ do {
+ LibAmdMsrRead (MSR_COFVID_STS, &LocalMsrRegister, StdHeader);
+ } while (GetF16KbCurCpuVid (&LocalMsrRegister) != GetF16KbCpuVid (&TargetPsMsr));
+ }
+
+ // 6. Wait for MSRC001_0063[CurPstate] = MSRC001_0062[PstateCmd].
+ LibAmdMsrRead (MSR_PSTATE_CTL, &PstateCtrl, StdHeader);
+ do {
+ LibAmdMsrRead (MSR_PSTATE_STS, &LocalMsrRegister, StdHeader);
+ } while (((PSTATE_STS_MSR *) &LocalMsrRegister)->CurPstate != ((PSTATE_CTRL_MSR *) &PstateCtrl)->PstateCmd);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbCoreAfterReset.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbCoreAfterReset.h
new file mode 100644
index 0000000..2f98628
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbCoreAfterReset.h
@@ -0,0 +1,78 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini after warm reset sequence for core P-states
+ *
+ * Contains code that provide power management functionality
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _F16_KB_CORE_AFTER_RESET_H_
+#define _F16_KB_CORE_AFTER_RESET_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F16KbPmCoreAfterReset (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _F16_KB_CORE_AFTER_RESET_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbCpb.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbCpb.c
new file mode 100644
index 0000000..db00c58
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbCpb.c
@@ -0,0 +1,195 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 CPB Initialization
+ *
+ * Enables core performance boost.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF16PowerMgmt.h"
+#include "F16KbPowerMgmt.h"
+#include "cpuFeatures.h"
+#include "cpuCpb.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBCPB_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+F16KbIsCpbSupported (
+ IN CPB_FAMILY_SERVICES *CpbServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+STATIC
+F16KbInitializeCpb (
+ IN CPB_FAMILY_SERVICES *CpbServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN UINT64 EntryPoint,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * BSC entry point for checking whether or not CPB is supported.
+ *
+ * @param[in] CpbServices The current CPU's family services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] Socket Zero based socket number to check.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ * @retval TRUE CPB is supported.
+ * @retval FALSE CPB is not supported.
+ *
+ */
+BOOLEAN
+STATIC
+F16KbIsCpbSupported (
+ IN CPB_FAMILY_SERVICES *CpbServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 MsrData;
+ BOOLEAN CpbSupported;
+ CPB_CTRL_REGISTER CpbControl;
+ PCI_ADDR PciAddress;
+
+ CpbSupported = FALSE;
+
+ PciAddress.AddressValue = CPB_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &CpbControl, StdHeader);
+ if (CpbControl.NumBoostStates != 0) {
+ LibAmdMsrRead (MSR_PSTATE_0, &MsrData, StdHeader);
+ if (((PSTATE_MSR *) &MsrData)->PsEnable == 1) {
+ CpbSupported = TRUE;
+ }
+ }
+ return CpbSupported;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * BSC entry point for for enabling Core Performance Boost.
+ *
+ * Set up D18F4x15C[BoostSrc] and start the PDMs according to the BKDG.
+ *
+ * @param[in] CpbServices The current CPU's family services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] EntryPoint Current CPU feature dispatch point.
+ * @param[in] Socket Zero based socket number to check.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F16KbInitializeCpb (
+ IN CPB_FAMILY_SERVICES *CpbServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN UINT64 EntryPoint,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPB_CTRL_REGISTER CpbControl;
+ PCI_ADDR PciAddress;
+ F16_PSTATE_MSR PstateMsrData;
+ UINT32 Pbx;
+
+ if ((EntryPoint & (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC)) != 0) {
+ PciAddress.AddressValue = CPB_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &CpbControl, StdHeader);
+ if ((CpbControl.BoostSrc == 0) && (CpbControl.NumBoostStates != 0)) {
+ // If any boosted P-state is still enabled, set BoostSrc = 1.
+ for (Pbx = 0; Pbx < CpbControl.NumBoostStates; Pbx++) {
+ LibAmdMsrRead (PS_REG_BASE + Pbx, (UINT64 *)&PstateMsrData, StdHeader);
+ if (PstateMsrData.PsEnable == 1) {
+ CpbControl.BoostSrc = 1;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &CpbControl, StdHeader);
+ break;
+ }
+ }
+ }
+ }
+ return AGESA_SUCCESS;
+}
+
+CONST CPB_FAMILY_SERVICES ROMDATA F16KbCpbSupport =
+{
+ 0,
+ F16KbIsCpbSupported,
+ F16KbInitializeCpb
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbDmi.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbDmi.c
new file mode 100644
index 0000000..37d0aa0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbDmi.c
@@ -0,0 +1,369 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD DMI Record Creation API, and related functions for Family16h Kabini.
+ *
+ * Contains code that produce the DMI related information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 87400 $ @e \$Date: 2013-02-01 12:14:44 -0600 (Fri, 01 Feb 2013) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "cpuLateInit.h"
+#include "cpuF16Dmi.h"
+#include "cpuF16PowerMgmt.h"
+#include "F16KbPowerMgmt.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBDMI_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE PstateFamilyServiceTable;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ * Processor Family Table
+ *
+ *-------------------------------------------------------------------------------------*/
+CONST CHAR8 ROMDATA str_A6[] = "AMD A6-";
+CONST CHAR8 ROMDATA str_A4[] = "AMD A4-";
+CONST CHAR8 ROMDATA str_E2[] = "AMD E2-";
+CONST CHAR8 ROMDATA str_E1[] = "AMD E1-";
+CONST CHAR8 ROMDATA str_GX[] = "AMD GX-";
+/*---------------------------------------------------------------------------------------
+ * Processor Family Table
+ *
+ * 047h = "E-Series"
+ * 048h = "A-Series"
+ * 049h = "GX-Series"
+ *-------------------------------------------------------------------------------------*/
+CONST CPU_T4_PROC_FAMILY ROMDATA F16KbFT3T4ProcFamily[] =
+{
+ {str_A6, 0x48},
+ {str_A4, 0x48},
+ {str_E2, 0x47},
+ {str_E1, 0x47},
+ {str_GX, 0x49},
+};
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+DmiF16KbGetInfo (
+ IN OUT CPU_TYPE_INFO *CpuInfoPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+DmiF16KbGetT4ProcFamily (
+ IN OUT UINT8 *T4ProcFamily,
+ IN PROC_FAMILY_TABLE *CpuDmiProcFamilyTable,
+ IN CPU_TYPE_INFO *CpuInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+DmiF16KbGetVoltage (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+DmiF16KbGetMemInfo (
+ IN OUT CPU_GET_MEM_INFO *CpuGetMemInfoPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT16
+DmiF16KbGetExtClock (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * DmiF16KbGetInfo
+ *
+ * Get CPU type information
+ *
+ * @param[in,out] CpuInfoPtr Pointer to CPU_TYPE_INFO struct.
+ * @param[in] StdHeader Standard Head Pointer
+ *
+ */
+VOID
+DmiF16KbGetInfo (
+ IN OUT CPU_TYPE_INFO *CpuInfoPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPUID_DATA CpuId;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ LibAmdCpuidRead (AMD_CPUID_FMF, &CpuId, StdHeader);
+ CpuInfoPtr->ExtendedFamily = (UINT8) (CpuId.EAX_Reg >> 20) & 0xFF; // bit 27:20
+ CpuInfoPtr->ExtendedModel = (UINT8) (CpuId.EAX_Reg >> 16) & 0xF; // bit 19:16
+ CpuInfoPtr->BaseFamily = (UINT8) (CpuId.EAX_Reg >> 8) & 0xF; // bit 11:8
+ CpuInfoPtr->BaseModel = (UINT8) (CpuId.EAX_Reg >> 4) & 0xF; // bit 7:4
+ CpuInfoPtr->Stepping = (UINT8) (CpuId.EAX_Reg & 0xF); // bit 3:0
+
+ CpuInfoPtr->PackageType = (UINT8) (CpuId.EBX_Reg >> 28) & 0xF; // bit 31:28
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ CpuInfoPtr->TotalCoreNumber = FamilySpecificServices->GetNumberOfPhysicalCores (FamilySpecificServices, StdHeader);
+ CpuInfoPtr->TotalCoreNumber--;
+
+ LibAmdCpuidRead (AMD_CPUID_ASIZE_PCCOUNT, &CpuId, StdHeader);
+ CpuInfoPtr->EnabledCoreNumber = (UINT8) (CpuId.ECX_Reg & 0xFF); // bit 7:0
+
+ switch (CpuInfoPtr->PackageType) {
+ case KB_SOCKET_FT3:
+ /// Use 'NONE' for BGA package
+ CpuInfoPtr->ProcUpgrade = P_UPGRADE_NONE;
+ break;
+ default:
+ CpuInfoPtr->ProcUpgrade = P_UPGRADE_UNKNOWN;
+ break;
+ }
+
+ // L1 Size & Associativity
+ LibAmdCpuidRead (AMD_CPUID_TLB_L1Cache, &CpuId, StdHeader);
+ CpuInfoPtr->CacheInfo.L1CacheSize = (UINT32) (((CpuId.ECX_Reg >> 24) + (CpuId.EDX_Reg >> 24)) * (CpuInfoPtr->TotalCoreNumber + 1));
+
+ CpuInfoPtr->CacheInfo.L1CacheAssoc = DMI_ASSOCIATIVE_2_WAY; // Per the BKDG, this is hard-coded to 2-Way.
+
+ // L2 Size & Associativity
+ LibAmdCpuidRead (AMD_CPUID_L2L3Cache_L2TLB, &CpuId, StdHeader);
+ CpuInfoPtr->CacheInfo.L2CacheSize = (UINT32) (CpuId.ECX_Reg >> 16);
+
+ CpuInfoPtr->CacheInfo.L2CacheAssoc = DMI_ASSOCIATIVE_16_WAY; // Per the BKDG, this is hard-coded to 16-Way.
+
+ // L3 Size & Associativity
+ CpuInfoPtr->CacheInfo.L3CacheSize = 0;
+ CpuInfoPtr->CacheInfo.L3CacheAssoc = DMI_ASSOCIATIVE_UNKNOWN;
+ }
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * DmiF16KbGetT4ProcFamily
+ *
+ * Get type 4 processor family information
+ *
+ * @param[in,out] T4ProcFamily Pointer to type 4 processor family information.
+ * @param[in] *CpuDmiProcFamilyTable Pointer to DMI family special service
+ * @param[in] *CpuInfo Pointer to CPU_TYPE_INFO struct
+ * @param[in] StdHeader Standard Head Pointer
+ *
+ */
+VOID
+DmiF16KbGetT4ProcFamily (
+ IN OUT UINT8 *T4ProcFamily,
+ IN PROC_FAMILY_TABLE *CpuDmiProcFamilyTable,
+ IN CPU_TYPE_INFO *CpuInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CHAR8 NameString[49];
+ CONST CHAR8 *DmiString;
+ CONST VOID *DmiStringTable;
+ UINT8 NumberOfDmiString;
+ UINT8 i;
+
+ // Get name string from MSR_C001_00[30:35]
+ GetNameString (NameString, StdHeader);
+ // Get DMI String
+ DmiStringTable = NULL;
+ switch (CpuInfo->PackageType) {
+ case KB_SOCKET_FT3:
+ DmiStringTable = (CONST VOID *) &F16KbFT3T4ProcFamily[0];
+ NumberOfDmiString = sizeof (F16KbFT3T4ProcFamily) / sizeof (CPU_T4_PROC_FAMILY);
+ break;
+ default:
+ DmiStringTable = NULL;
+ NumberOfDmiString = 0;
+ break;
+ }
+
+ // Find out which DMI string matches current processor's name string
+ *T4ProcFamily = P_FAMILY_UNKNOWN;
+ if ((DmiStringTable != NULL) && (NumberOfDmiString != 0)) {
+ for (i = 0; i < NumberOfDmiString; i++) {
+ DmiString = (((CPU_T4_PROC_FAMILY *) DmiStringTable)[i]).Stringstart;
+ if (IsSourceStrContainTargetStr (NameString, DmiString, StdHeader)) {
+ *T4ProcFamily = (((CPU_T4_PROC_FAMILY *) DmiStringTable)[i]).T4ProcFamilySetting;
+ break;
+ }
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * DmiF16KbGetVoltage
+ *
+ * Get the voltage value according to SMBIOS SPEC's requirement.
+ *
+ * @param[in] StdHeader Standard Head Pointer
+ *
+ * @retval Voltage - CPU Voltage.
+ *
+ */
+UINT8
+DmiF16KbGetVoltage (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 MaxVid;
+ UINT8 Voltage;
+ UINT8 NumberBoostStates;
+ UINT64 MsrData;
+ PCI_ADDR TempAddr;
+ CPB_CTRL_REGISTER CpbCtrl;
+
+ // Voltage = 0x80 + (voltage at boot time * 10)
+ TempAddr.AddressValue = CPB_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, TempAddr, &CpbCtrl, StdHeader); // F4x15C
+ NumberBoostStates = (UINT8) CpbCtrl.NumBoostStates;
+
+ LibAmdMsrRead ((MSR_PSTATE_0 + NumberBoostStates), &MsrData, StdHeader);
+ MaxVid = (UINT8) (((PSTATE_MSR *)&MsrData)->CpuVid);
+
+ if ((MaxVid >= 0xF8) && (MaxVid <= 0xFF)) {
+ Voltage = 0;
+ } else {
+ Voltage = (UINT8) ((155000L - (625 * MaxVid) + 5000) / 10000);
+ }
+
+ Voltage += 0x80;
+ return (Voltage);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * DmiF16KbGetMemInfo
+ *
+ * Get memory information.
+ *
+ * @param[in,out] CpuGetMemInfoPtr Pointer to CPU_GET_MEM_INFO struct.
+ * @param[in] StdHeader Standard Head Pointer
+ *
+ */
+VOID
+DmiF16KbGetMemInfo (
+ IN OUT CPU_GET_MEM_INFO *CpuGetMemInfoPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 PciData;
+ PCI_ADDR PciAddress;
+
+ CpuGetMemInfoPtr->EccCapable = FALSE;
+
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_2, 0x90);
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+ // Check if F2x90[DimmEccEn] is set
+ if ((PciData & 0x00080000) != 0) {
+ CpuGetMemInfoPtr->EccCapable = TRUE;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * DmiF16KbGetExtClock
+ *
+ * Get the external clock Speed
+ *
+ * @param[in] StdHeader Standard Head Pointer
+ *
+ * @retval ExtClock - CPU external clock Speed.
+ *
+ */
+UINT16
+DmiF16KbGetExtClock (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return (EXTERNAL_CLOCK_DFLT);
+}
+
+/* -----------------------------------------------------------------------------*/
+CONST PROC_FAMILY_TABLE ROMDATA ProcFamily16KbDmiTable =
+{
+// This table is for Processor family 16h Kabini
+ AMD_FAMILY_16_KB, // ID for Family 16h Kabini
+ DmiF16KbGetInfo, // Transfer vectors for family
+ DmiF16KbGetT4ProcFamily, // Get type 4 processor family information
+ DmiF16KbGetVoltage, // specific routines (above)
+ DmiF16GetMaxSpeed,
+ DmiF16KbGetExtClock,
+ DmiF16KbGetMemInfo, // Get memory information
+ 0,
+ NULL
+};
+
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbEquivalenceTable.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbEquivalenceTable.c
new file mode 100644
index 0000000..02e5df9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbEquivalenceTable.c
@@ -0,0 +1,120 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini Equivalence Table related data
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBEQUIVALENCETABLE_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF16KbMicrocodeEquivalenceTable (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **KbEquivalenceTablePtr,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST UINT16 ROMDATA stu1[] =
+{
+ 0x7001, 0x7001,
+ 0x7000, 0x7000
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the appropriate microcode patch equivalent ID table.
+ *
+ * @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] KbEquivalenceTablePtr Points to the first entry in the table.
+ * @param[out] NumberOfElements Number of valid entries in the table.
+ * @param[in] StdHeader Header for library and services.
+ *
+ */
+VOID
+GetF16KbMicrocodeEquivalenceTable (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **KbEquivalenceTablePtr,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 MsrDeCfg;
+
+ LibAmdMsrRead (0xC0011029, &MsrDeCfg, StdHeader);
+ if ((MsrDeCfg & BIT12) == 0) {
+ } else {
+ *NumberOfElements = ((sizeof (stu1) / sizeof (UINT16)) / 2);
+ *KbEquivalenceTablePtr = stu1;
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbHtc.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbHtc.c
new file mode 100644
index 0000000..9b93e45
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbHtc.c
@@ -0,0 +1,178 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini thermal initialization
+ *
+ * Performs processor thermal initialization.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 85817 $ @e \$Date: 2013-01-11 16:58:12 -0600 (Fri, 11 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "CommonReturns.h"
+#include "cpuFeatures.h"
+#include "cpuHtc.h"
+#include "cpuF16PowerMgmt.h"
+#include "F16KbPowerMgmt.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbRegistersKB.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbHandleLib.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBHTC_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+STATIC
+F16KbInitializeHtc (
+ IN HTC_FAMILY_SERVICES *HtcServices,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for initializing the Thermal Control
+ * safety net feature.
+ *
+ * This must be run by all Family 16h Kabini core 0s in the system.
+ *
+ * @param[in] HtcServices The current CPU's family services.
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F16KbInitializeHtc (
+ IN HTC_FAMILY_SERVICES *HtcServices,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 HtcTempLimit;
+ NB_CAPS_REGISTER NbCaps;
+ HTC_REGISTER HtcReg;
+ CLK_PWR_TIMING_CTRL2_REGISTER Cptc2;
+ POPUP_PSTATE_REGISTER PopUpPstate;
+ PCI_ADDR PciAddress;
+ UINT32 D0F0xBC_xC0107097;
+
+ if ((EntryPoint & (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC)) != 0) {
+ PciAddress.AddressValue = NB_CAPS_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbCaps, StdHeader);
+ if (NbCaps.HtcCapable == 1) {
+ // Enable HTC
+ PciAddress.Address.Register = HTC_REG;
+ LibAmdPciRead (AccessWidth32, PciAddress, &HtcReg, StdHeader);
+ GnbRegisterReadKB (GnbGetHandle (StdHeader), 0x4, 0xC0107097, &D0F0xBC_xC0107097, 0, StdHeader);
+ HtcReg.HtcTmpLmt = (D0F0xBC_xC0107097 >> 3) & 0x7F;
+ if (HtcReg.HtcTmpLmt != 0) {
+ // Enable HTC
+ HtcReg.HtcEn = 1;
+ PciAddress.Address.Register = CPTC2_REG;
+ LibAmdPciRead (AccessWidth32, PciAddress, &Cptc2, StdHeader);
+ if (HtcReg.HtcPstateLimit > Cptc2.HwPstateMaxVal) {
+ // F3xDC[HwPstateMaxVal] = F3x64[HtcPstateLimit]
+ Cptc2.HwPstateMaxVal = HtcReg.HtcPstateLimit;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &Cptc2, StdHeader);
+ // F3xA8[PopDownPstate] = F3xDC[HwPstateMaxVal]
+ PciAddress.Address.Register = POPUP_PSTATE_REG;
+ LibAmdPciRead (AccessWidth32, PciAddress, &PopUpPstate, StdHeader);
+ PopUpPstate.PopDownPstate = Cptc2.HwPstateMaxVal;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PopUpPstate, StdHeader);
+ }
+ if ((PlatformConfig->HtcTemperatureLimit >= 520) && (PlatformConfig->LhtcTemperatureLimit != 0)) {
+ HtcTempLimit = ((PlatformConfig->HtcTemperatureLimit - 520) / 5);
+ if (HtcTempLimit < HtcReg.HtcTmpLmt) {
+ HtcReg.HtcTmpLmt = HtcTempLimit;
+ }
+ }
+ } else {
+ // Disable HTC
+ HtcReg.HtcEn = 0;
+ }
+ PciAddress.Address.Register = HTC_REG;
+ IDS_OPTION_HOOK (IDS_HTC_CTRL, &HtcReg, StdHeader);
+ LibAmdPciWrite (AccessWidth32, PciAddress, &HtcReg, StdHeader);
+ }
+ }
+ return AGESA_SUCCESS;
+}
+
+CONST HTC_FAMILY_SERVICES ROMDATA F16KbHtcSupport =
+{
+ 0,
+ (PF_HTC_IS_SUPPORTED) CommonReturnTrue,
+ F16KbInitializeHtc
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbInitEarlyTable.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbInitEarlyTable.c
new file mode 100644
index 0000000..9c0e54b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbInitEarlyTable.c
@@ -0,0 +1,143 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize the Family 16h Kabini specific way of running early initialization.
+ *
+ * Returns the table of initialization steps to perform at
+ * AmdInitEarly.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/FAMILY/0x16/KB
+ * @e \$Revision: 86705 $ @e \$Date: 2013-01-24 17:34:21 -0600 (Thu, 24 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBINITEARLYTABLE_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST S_PERFORM_EARLY_INIT_ON_CORE ROMDATA F16KbEarlyInitBeforeApLaunchOnCoreTable[];
+extern CONST S_PERFORM_EARLY_INIT_ON_CORE ROMDATA F16KbEarlyInitAfterApLaunchOnCoreTable[];
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GetF16KbEarlyInitBeforeApLaunchOnCoreTable (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ OUT CONST S_PERFORM_EARLY_INIT_ON_CORE **Table,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GetF16KbEarlyInitAfterApLaunchOnCoreTable (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ OUT CONST S_PERFORM_EARLY_INIT_ON_CORE **Table,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initializer routine that may be invoked at AmdCpuEarly (Before AP launch) to return the steps that a
+ * processor that uses the standard initialization steps should take.
+ *
+ * @CpuServiceMethod{::F_GET_EARLY_INIT_TABLE}.
+ *
+ * @param[in] FamilyServices The current Family Specific Services.
+ * @param[out] Table Table of appropriate init steps for the executing core.
+ * @param[in] EarlyParams Service Interface structure to initialize.
+ * @param[in] StdHeader Opaque handle to standard config header.
+ *
+ */
+VOID
+GetF16KbEarlyInitBeforeApLaunchOnCoreTable (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ OUT CONST S_PERFORM_EARLY_INIT_ON_CORE **Table,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *Table = F16KbEarlyInitBeforeApLaunchOnCoreTable;
+}
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initializer routine that may be invoked at AmdCpuEarly (After AP launch) to return the steps that a
+ * processor that uses the standard initialization steps should take.
+ *
+ * @CpuServiceMethod{::F_GET_EARLY_INIT_TABLE}.
+ *
+ * @param[in] FamilyServices The current Family Specific Services.
+ * @param[out] Table Table of appropriate init steps for the executing core.
+ * @param[in] EarlyParams Service Interface structure to initialize.
+ * @param[in] StdHeader Opaque handle to standard config header.
+ *
+ */
+VOID
+GetF16KbEarlyInitAfterApLaunchOnCoreTable (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ OUT CONST S_PERFORM_EARLY_INIT_ON_CORE **Table,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *Table = F16KbEarlyInitAfterApLaunchOnCoreTable;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbIoCstate.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbIoCstate.c
new file mode 100644
index 0000000..d3923d6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbIoCstate.c
@@ -0,0 +1,371 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini IO C-state feature support functions.
+ *
+ * Provides the functions necessary to initialize the IO C-state feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFeatures.h"
+#include "cpuIoCstate.h"
+#include "cpuF16PowerMgmt.h"
+#include "F16KbPowerMgmt.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "CommonReturns.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBIOCSTATE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F16KbInitializeIoCstateOnCore (
+ IN VOID *CstateBaseMsr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+F16KbIsCsdObjGenerated (
+ IN IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE IoCstateFamilyServiceTable;
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Enable IO Cstate on a family 16h Kabini CPU.
+ * Implement BIOS Requirements for Initialization of C-states
+ *
+ * @param[in] IoCstateServices Pointer to this CPU's IO Cstate family services.
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return AGESA_SUCCESS Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F16KbInitializeIoCstate (
+ IN IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 LocalMsrRegister;
+ AP_TASK TaskPtr;
+ PCI_ADDR PciAddress;
+ CSTATE_POLICY_CTRL1_REGISTER CstatePolicyCtrl1;
+
+ if ((EntryPoint & CPU_FEAT_AFTER_PM_INIT) != 0) {
+ // Initialize F4x128
+ // bit[4:2] HaltCstateIndex = 0
+ PciAddress.AddressValue = CSTATE_POLICY_CTRL1_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &CstatePolicyCtrl1, StdHeader);
+ CstatePolicyCtrl1.HaltCstateIndex = 0;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &CstatePolicyCtrl1, StdHeader);
+
+ // Initialize MSRC001_0073[CstateAddr] on each core to a region of
+ // the IO address map with 8 consecutive available addresses.
+ LocalMsrRegister = 0;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " Init IO C-state Base at 0x%x\n", PlatformConfig->CStateIoBaseAddress);
+ ((CSTATE_ADDRESS_MSR *) &LocalMsrRegister)->CstateAddr = PlatformConfig->CStateIoBaseAddress;
+
+ TaskPtr.FuncAddress.PfApTaskI = F16KbInitializeIoCstateOnCore;
+ TaskPtr.DataTransfer.DataSizeInDwords = 2;
+ TaskPtr.DataTransfer.DataPtr = &LocalMsrRegister;
+ TaskPtr.DataTransfer.DataTransferFlags = 0;
+ TaskPtr.ExeFlags = WAIT_FOR_CORE;
+ ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, NULL);
+ }
+ return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Enable CState on a family 16h Kabini core.
+ *
+ * @param[in] CstateBaseMsr MSR value to write to C001_0073 as determined by core 0.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F16KbInitializeIoCstateOnCore (
+ IN VOID *CstateBaseMsr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ // Initialize MSRC001_0073[CstateAddr] on each core
+ LibAmdMsrWrite (MSR_CSTATE_ADDRESS, (UINT64 *) CstateBaseMsr, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the size of CST object
+ *
+ * @param[in] IoCstateServices IO Cstate services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval CstObjSize Size of CST Object
+ *
+ */
+UINT32
+STATIC
+F16KbGetAcpiCstObj (
+ IN IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BOOLEAN GenerateCsdObj;
+ UINT32 CStateAcpiObjSize;
+ IO_CSTATE_FAMILY_SERVICES *FamilyServices;
+ ACPI_CST_GET_INPUT CstGetInput;
+
+ CstGetInput.IoCstateServices = IoCstateServices;
+ CstGetInput.PlatformConfig = PlatformConfig;
+ CstGetInput.CStateAcpiObjSizePtr = &CStateAcpiObjSize;
+
+ IDS_SKIP_HOOK (IDS_CST_SIZE, &CstGetInput, StdHeader) {
+ CStateAcpiObjSize = CST_HEADER_SIZE + CST_BODY_SIZE;
+
+ // If CSD Object is generated, add the size of CSD Object to the total size of
+ // CState ACPI Object size
+ GetFeatureServicesOfCurrentCore (&IoCstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+ GenerateCsdObj = FamilyServices->IsCsdObjGenerated (FamilyServices, StdHeader);
+
+ if (GenerateCsdObj) {
+ CStateAcpiObjSize += CSD_HEADER_SIZE + CSD_BODY_SIZE;
+ }
+ }
+ return CStateAcpiObjSize;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Routine to generate the C-State ACPI objects
+ *
+ * @param[in] IoCstateServices IO Cstate services.
+ * @param[in] LocalApicId Local Apic Id for each core.
+ * @param[in, out] **PstateAcpiBufferPtr Pointer to the Acpi Buffer Pointer.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+VOID
+STATIC
+F16KbCreateAcpiCstObj (
+ IN IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+ IN UINT8 LocalApicId,
+ IN OUT VOID **PstateAcpiBufferPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 MsrData;
+ BOOLEAN GenerateCsdObj;
+ CST_HEADER_STRUCT *CstHeaderPtr;
+ CST_BODY_STRUCT *CstBodyPtr;
+ CSD_HEADER_STRUCT *CsdHeaderPtr;
+ CSD_BODY_STRUCT *CsdBodyPtr;
+ IO_CSTATE_FAMILY_SERVICES *FamilyServices;
+ ACPI_CST_CREATE_INPUT CstInput;
+
+ CstInput.IoCstateServices = IoCstateServices;
+ CstInput.LocalApicId = LocalApicId;
+ CstInput.PstateAcpiBufferPtr = PstateAcpiBufferPtr;
+
+ IDS_SKIP_HOOK (IDS_CST_CREATE, &CstInput, StdHeader) {
+ // Read from MSR C0010073 to obtain CstateAddr
+ LibAmdMsrRead (MSR_CSTATE_ADDRESS, &MsrData, StdHeader);
+
+ // Typecast the pointer
+ CstHeaderPtr = (CST_HEADER_STRUCT *) *PstateAcpiBufferPtr;
+
+ // Set CST Header
+ CstHeaderPtr->NameOpcode = NAME_OPCODE;
+ CstHeaderPtr->CstName_a__ = CST_NAME__;
+ CstHeaderPtr->CstName_a_C = CST_NAME_C;
+ CstHeaderPtr->CstName_a_S = CST_NAME_S;
+ CstHeaderPtr->CstName_a_T = CST_NAME_T;
+
+ // Typecast the pointer
+ CstHeaderPtr++;
+ CstBodyPtr = (CST_BODY_STRUCT *) CstHeaderPtr;
+
+ // Set CST Body
+ CstBodyPtr->PkgOpcode = PACKAGE_OPCODE;
+ CstBodyPtr->PkgLength = CST_LENGTH;
+ CstBodyPtr->PkgElements = CST_NUM_OF_ELEMENTS;
+ CstBodyPtr->BytePrefix = BYTE_PREFIX_OPCODE;
+ CstBodyPtr->Count = CST_COUNT;
+ CstBodyPtr->PkgOpcode2 = PACKAGE_OPCODE;
+ CstBodyPtr->PkgLength2 = CST_PKG_LENGTH;
+ CstBodyPtr->PkgElements2 = CST_PKG_ELEMENTS;
+ CstBodyPtr->BufferOpcode = BUFFER_OPCODE;
+ CstBodyPtr->BufferLength = CST_SUBPKG_LENGTH;
+ CstBodyPtr->BufferElements = CST_SUBPKG_ELEMENTS;
+ CstBodyPtr->BufferOpcode2 = BUFFER_OPCODE;
+ CstBodyPtr->GdrOpcode = GENERIC_REG_DESCRIPTION;
+ CstBodyPtr->GdrLength = CST_GDR_LENGTH;
+ CstBodyPtr->AddrSpaceId = GDR_ASI_SYSTEM_IO;
+ CstBodyPtr->RegBitWidth = 0x08;
+ CstBodyPtr->RegBitOffset = 0x00;
+ CstBodyPtr->AddressSize = GDR_ASZ_BYTE_ACCESS;
+ CstBodyPtr->RegisterAddr = ((CSTATE_ADDRESS_MSR *) &MsrData)->CstateAddr + 1;
+ CstBodyPtr->EndTag = 0x0079;
+ CstBodyPtr->BytePrefix2 = BYTE_PREFIX_OPCODE;
+ CstBodyPtr->Type = CST_C2_TYPE;
+ CstBodyPtr->WordPrefix = WORD_PREFIX_OPCODE;
+ CstBodyPtr->Latency = 400;
+ CstBodyPtr->DWordPrefix = DWORD_PREFIX_OPCODE;
+ CstBodyPtr->Power = 0;
+
+ CstBodyPtr++;
+ //Update the pointer
+ *PstateAcpiBufferPtr = CstBodyPtr;
+
+
+ // Check whether CSD object should be generated
+ GetFeatureServicesOfCurrentCore (&IoCstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+ GenerateCsdObj = FamilyServices->IsCsdObjGenerated (FamilyServices, StdHeader);
+
+ if (GenerateCsdObj) {
+ CsdHeaderPtr = (CSD_HEADER_STRUCT *) *PstateAcpiBufferPtr;
+
+ // Set CSD Header
+ CsdHeaderPtr->NameOpcode = NAME_OPCODE;
+ CsdHeaderPtr->CsdName_a__ = CST_NAME__;
+ CsdHeaderPtr->CsdName_a_C = CST_NAME_C;
+ CsdHeaderPtr->CsdName_a_S = CST_NAME_S;
+ CsdHeaderPtr->CsdName_a_D = CSD_NAME_D;
+
+ CsdHeaderPtr++;
+ CsdBodyPtr = (CSD_BODY_STRUCT *) CsdHeaderPtr;
+
+ // Set CSD Body
+ CsdBodyPtr->PkgOpcode = PACKAGE_OPCODE;
+ CsdBodyPtr->PkgLength = CSD_BODY_SIZE - 1;
+ CsdBodyPtr->PkgElements = 1;
+ CsdBodyPtr->PkgOpcode2 = PACKAGE_OPCODE;
+ CsdBodyPtr->PkgLength2 = CSD_BODY_SIZE - 4; // CSD_BODY_SIZE - Package() - Package Opcode
+ CsdBodyPtr->PkgElements2 = 6;
+ CsdBodyPtr->BytePrefix = BYTE_PREFIX_OPCODE;
+ CsdBodyPtr->NumEntries = 6;
+ CsdBodyPtr->BytePrefix2 = BYTE_PREFIX_OPCODE;
+ CsdBodyPtr->Revision = 0;
+ CsdBodyPtr->DWordPrefix = DWORD_PREFIX_OPCODE;
+ CsdBodyPtr->Domain = (LocalApicId & 0xFE) >> 1;
+ CsdBodyPtr->DWordPrefix2 = DWORD_PREFIX_OPCODE;
+ CsdBodyPtr->CoordType = CSD_COORD_TYPE_HW_ALL;
+ CsdBodyPtr->DWordPrefix3 = DWORD_PREFIX_OPCODE;
+ CsdBodyPtr->NumProcessors = 0x2;
+ CsdBodyPtr->DWordPrefix4 = DWORD_PREFIX_OPCODE;
+ CsdBodyPtr->Index = 0x0;
+
+ CsdBodyPtr++;
+
+ // Update the pointer
+ *PstateAcpiBufferPtr = CsdBodyPtr;
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Routine to check whether CSD object should be created.
+ *
+ * @param[in] IoCstateServices IO Cstate services.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE CSD Object should be created.
+ * @retval FALSE CSD Object should not be created.
+ *
+ */
+BOOLEAN
+F16KbIsCsdObjGenerated (
+ IN IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ // CSD Object should only be created when there are two cores per compute unit
+ if (GetComputeUnitMapping (StdHeader) == EvenCoresMapping) {
+ return TRUE;
+ }
+ return FALSE;
+}
+
+CONST IO_CSTATE_FAMILY_SERVICES ROMDATA F16KbIoCstateSupport =
+{
+ 0,
+ (PF_IO_CSTATE_IS_SUPPORTED) CommonReturnTrue,
+ F16KbInitializeIoCstate,
+ F16KbGetAcpiCstObj,
+ F16KbCreateAcpiCstObj,
+ F16KbIsCsdObjGenerated
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbLogicalIdTables.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbLogicalIdTables.c
new file mode 100644
index 0000000..97affa0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbLogicalIdTables.c
@@ -0,0 +1,107 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini Logical ID Table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBLOGICALIDTABLES_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF16KbLogicalIdAndRev (
+ OUT CONST CPU_LOGICAL_ID_XLAT **KbIdPtr,
+ OUT UINT8 *NumberOfElements,
+ OUT UINT64 *LogicalFamily,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+STATIC CONST CPU_LOGICAL_ID_XLAT ROMDATA CpuF16KbLogicalIdAndRevArray[] =
+{
+ {
+ 0x7001,
+ AMD_F16_KB_A1
+ },
+ {
+ 0x7000,
+ AMD_F16_KB_A0
+ },
+};
+
+VOID
+GetF16KbLogicalIdAndRev (
+ OUT CONST CPU_LOGICAL_ID_XLAT **KbIdPtr,
+ OUT UINT8 *NumberOfElements,
+ OUT UINT64 *LogicalFamily,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *NumberOfElements = (sizeof (CpuF16KbLogicalIdAndRevArray) / sizeof (CPU_LOGICAL_ID_XLAT));
+ *KbIdPtr = CpuF16KbLogicalIdAndRevArray;
+ *LogicalFamily = AMD_FAMILY_16_KB;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbMicrocodePatch0700002A_Enc.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbMicrocodePatch0700002A_Enc.c
new file mode 100644
index 0000000..5a010ae
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbMicrocodePatch0700002A_Enc.c
@@ -0,0 +1,3539 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD F16Kb Microcode patch.
+ *
+ * F16Kb Microcode Patch rev 0700002A for 7000 or equivalent.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84798 $ @e \$Date: 2012-12-19 21:26:23 -0600 (Wed, 19 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+// Encrypt Patch code 0700002A for 7000 and equivalent
+
+CONST UINT8 ROMDATA arr1 [IDS_PAD_4K] =
+{
+ 0x12,
+ 0x20,
+ 0x18,
+ 0x12,
+ 0x2a,
+ 0x00,
+ 0x00,
+ 0x07,
+ 0x03,
+ 0x80,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x70,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0xaa,
+ 0xaa,
+ 0xaa,
+ 0x49,
+ 0x98,
+ 0x47,
+ 0x92,
+ 0x9e,
+ 0x94,
+ 0x1c,
+ 0x90,
+ 0x43,
+ 0x82,
+ 0xfb,
+ 0x61,
+ 0x5c,
+ 0xc3,
+ 0x8a,
+ 0xb1,
+ 0xd7,
+ 0x77,
+ 0xc5,
+ 0x2f,
+ 0xe2,
+ 0x32,
+ 0x8e,
+ 0xa2,
+ 0xfe,
+ 0x17,
+ 0x86,
+ 0x8b,
+ 0xea,
+ 0xf8,
+ 0x9c,
+ 0x9a,
+ 0xdb,
+ 0x75,
+ 0x44,
+ 0x1c,
+ 0x12,
+ 0xd5,
+ 0x0f,
+ 0x64,
+ 0x9f,
+ 0x29,
+ 0x38,
+ 0x9c,
+ 0xec,
+ 0xfd,
+ 0x20,
+ 0xb9,
+ 0x5c,
+ 0x11,
+ 0xfa,
+ 0xac,
+ 0xde,
+ 0xa7,
+ 0xaf,
+ 0xb2,
+ 0x71,
+ 0x1b,
+ 0x5d,
+ 0x8d,
+ 0x0a,
+ 0x84,
+ 0xff,
+ 0xae,
+ 0x77,
+ 0xef,
+ 0xee,
+ 0xe8,
+ 0xb9,
+ 0xe4,
+ 0x4c,
+ 0xcf,
+ 0x43,
+ 0x69,
+ 0xda,
+ 0x62,
+ 0x85,
+ 0x56,
+ 0x75,
+ 0xf4,
+ 0xa9,
+ 0x9e,
+ 0x2a,
+ 0x63,
+ 0x6d,
+ 0xdd,
+ 0xcb,
+ 0x04,
+ 0x18,
+ 0xeb,
+ 0xa5,
+ 0xab,
+ 0x8d,
+ 0xd7,
+ 0x03,
+ 0x48,
+ 0x71,
+ 0x18,
+ 0x18,
+ 0x3e,
+ 0xff,
+ 0x33,
+ 0x60,
+ 0xb0,
+ 0x43,
+ 0x6c,
+ 0xa3,
+ 0xc6,
+ 0x78,
+ 0x0a,
+ 0xc8,
+ 0x88,
+ 0x0b,
+ 0x85,
+ 0x34,
+ 0x41,
+ 0x72,
+ 0xe7,
+ 0x2f,
+ 0xac,
+ 0x22,
+ 0x75,
+ 0x9c,
+ 0xe3,
+ 0x58,
+ 0xa0,
+ 0xf4,
+ 0xa7,
+ 0x39,
+ 0x42,
+ 0x6c,
+ 0x39,
+ 0xe6,
+ 0x8e,
+ 0xd2,
+ 0xbc,
+ 0x6d,
+ 0xea,
+ 0x84,
+ 0xb6,
+ 0x83,
+ 0xdf,
+ 0xfa,
+ 0x39,
+ 0xf8,
+ 0x22,
+ 0x55,
+ 0xd4,
+ 0x69,
+ 0x89,
+ 0x6a,
+ 0xcd,
+ 0xb0,
+ 0x3d,
+ 0xdc,
+ 0x2e,
+ 0x16,
+ 0xcd,
+ 0xd6,
+ 0xeb,
+ 0x66,
+ 0x67,
+ 0x74,
+ 0xc1,
+ 0x3c,
+ 0x7c,
+ 0xed,
+ 0xce,
+ 0x4c,
+ 0x15,
+ 0xdf,
+ 0x64,
+ 0x80,
+ 0xbc,
+ 0x7f,
+ 0xee,
+ 0x45,
+ 0x2f,
+ 0xa2,
+ 0x64,
+ 0x3b,
+ 0xed,
+ 0x26,
+ 0xdd,
+ 0xb5,
+ 0xb7,
+ 0xef,
+ 0xa2,
+ 0x7d,
+ 0x9b,
+ 0x05,
+ 0x67,
+ 0xbe,
+ 0x6e,
+ 0xbd,
+ 0xb4,
+ 0x7d,
+ 0x22,
+ 0x9f,
+ 0xea,
+ 0x5b,
+ 0xe5,
+ 0xf2,
+ 0x4b,
+ 0x5c,
+ 0xfa,
+ 0xad,
+ 0xcc,
+ 0x41,
+ 0x10,
+ 0x63,
+ 0x1a,
+ 0xc3,
+ 0x7a,
+ 0x8a,
+ 0x1e,
+ 0xc2,
+ 0x41,
+ 0x3f,
+ 0xde,
+ 0x82,
+ 0x7c,
+ 0xa9,
+ 0x49,
+ 0x43,
+ 0xd2,
+ 0x05,
+ 0x83,
+ 0xe6,
+ 0x2c,
+ 0x3f,
+ 0xb1,
+ 0x61,
+ 0xac,
+ 0x78,
+ 0x8a,
+ 0x03,
+ 0xe9,
+ 0xda,
+ 0x54,
+ 0xfd,
+ 0x80,
+ 0x93,
+ 0x32,
+ 0x84,
+ 0xf6,
+ 0xee,
+ 0xb1,
+ 0x5b,
+ 0xa4,
+ 0x3e,
+ 0x0d,
+ 0x7a,
+ 0x6a,
+ 0x53,
+ 0x85,
+ 0x61,
+ 0x29,
+ 0x17,
+ 0xb6,
+ 0xd3,
+ 0xaa,
+ 0x02,
+ 0x2e,
+ 0xef,
+ 0x99,
+ 0x23,
+ 0x88,
+ 0x70,
+ 0xa8,
+ 0xfa,
+ 0xbf,
+ 0x0a,
+ 0xac,
+ 0x41,
+ 0x1f,
+ 0x38,
+ 0x03,
+ 0x12,
+ 0x9f,
+ 0x87,
+ 0xd8,
+ 0x74,
+ 0xdb,
+ 0xf5,
+ 0x51,
+ 0x53,
+ 0xb0,
+ 0x57,
+ 0x74,
+ 0x1d,
+ 0xcd,
+ 0x21,
+ 0x0e,
+ 0xa8,
+ 0x0f,
+ 0x3e,
+ 0x0c,
+ 0x40,
+ 0x09,
+ 0xd2,
+ 0x1d,
+ 0xd7,
+ 0xb1,
+ 0x85,
+ 0x0d,
+ 0x1f,
+ 0x47,
+ 0x3e,
+ 0x59,
+ 0x67,
+ 0x09,
+ 0x95,
+ 0xbb,
+ 0x05,
+ 0x52,
+ 0x7f,
+ 0xf3,
+ 0xc2,
+ 0xf5,
+ 0x1a,
+ 0x80,
+ 0x6d,
+ 0x31,
+ 0x18,
+ 0x9d,
+ 0xc4,
+ 0x47,
+ 0xb4,
+ 0x5f,
+ 0x3c,
+ 0xbb,
+ 0x20,
+ 0x51,
+ 0x02,
+ 0x5a,
+ 0x32,
+ 0x13,
+ 0x8d,
+ 0x25,
+ 0x99,
+ 0x8d,
+ 0xa1,
+ 0x87,
+ 0x53,
+ 0xff,
+ 0x0b,
+ 0x74,
+ 0x68,
+ 0x85,
+ 0x34,
+ 0x3a,
+ 0x56,
+ 0xfd,
+ 0x68,
+ 0x0c,
+ 0x15,
+ 0xd2,
+ 0x67,
+ 0x4b,
+ 0x45,
+ 0xa5,
+ 0x1b,
+ 0x5c,
+ 0x5b,
+ 0xc9,
+ 0x08,
+ 0x73,
+ 0x99,
+ 0xd4,
+ 0xbb,
+ 0xca,
+ 0x5c,
+ 0x96,
+ 0x39,
+ 0x9c,
+ 0xbb,
+ 0xfe,
+ 0x1d,
+ 0xff,
+ 0x70,
+ 0xe1,
+ 0xdd,
+ 0xfb,
+ 0xb7,
+ 0x5a,
+ 0xce,
+ 0x1f,
+ 0x16,
+ 0xc8,
+ 0x2b,
+ 0x2d,
+ 0xa5,
+ 0xdc,
+ 0xbf,
+ 0x08,
+ 0xfe,
+ 0x8a,
+ 0xf8,
+ 0xd6,
+ 0xd7,
+ 0xf5,
+ 0x0e,
+ 0x5e,
+ 0xcf,
+ 0xb1,
+ 0x0f,
+ 0xf8,
+ 0x0c,
+ 0x89,
+ 0xb4,
+ 0x36,
+ 0xd3,
+ 0x81,
+ 0xe4,
+ 0xd5,
+ 0x16,
+ 0x23,
+ 0xe3,
+ 0x1c,
+ 0xb3,
+ 0xe1,
+ 0x82,
+ 0x41,
+ 0x81,
+ 0xd4,
+ 0x6b,
+ 0xc2,
+ 0x51,
+ 0xfb,
+ 0x26,
+ 0x59,
+ 0x9c,
+ 0x01,
+ 0xc2,
+ 0xc7,
+ 0xc1,
+ 0x60,
+ 0xf9,
+ 0xe0,
+ 0xfc,
+ 0x46,
+ 0xc0,
+ 0xd1,
+ 0xf7,
+ 0xc7,
+ 0xe1,
+ 0x44,
+ 0x23,
+ 0x3c,
+ 0x9d,
+ 0xec,
+ 0xbb,
+ 0x6e,
+ 0x88,
+ 0xae,
+ 0x2c,
+ 0xec,
+ 0xfb,
+ 0x5f,
+ 0xf4,
+ 0x12,
+ 0x35,
+ 0xff,
+ 0x09,
+ 0x81,
+ 0x66,
+ 0x81,
+ 0x56,
+ 0xcd,
+ 0xee,
+ 0x62,
+ 0x61,
+ 0x4d,
+ 0xc3,
+ 0xb7,
+ 0x45,
+ 0xa4,
+ 0xec,
+ 0x07,
+ 0xca,
+ 0x49,
+ 0xce,
+ 0x34,
+ 0x56,
+ 0x33,
+ 0xdf,
+ 0xaa,
+ 0xcb,
+ 0xf4,
+ 0xf8,
+ 0x00,
+ 0x29,
+ 0x2f,
+ 0x30,
+ 0xf4,
+ 0xb9,
+ 0x7a,
+ 0x5b,
+ 0x1b,
+ 0xb5,
+ 0xe4,
+ 0x14,
+ 0x78,
+ 0x04,
+ 0x04,
+ 0xb6,
+ 0x51,
+ 0xd2,
+ 0xf6,
+ 0xf1,
+ 0xf4,
+ 0x09,
+ 0xca,
+ 0x66,
+ 0xe5,
+ 0x79,
+ 0xda,
+ 0xff,
+ 0xbd,
+ 0x23,
+ 0x3e,
+ 0xb9,
+ 0xcb,
+ 0x81,
+ 0x4b,
+ 0x32,
+ 0xff,
+ 0x3d,
+ 0x64,
+ 0x5b,
+ 0xf3,
+ 0x78,
+ 0xe7,
+ 0x91,
+ 0x40,
+ 0x89,
+ 0xf4,
+ 0xdc,
+ 0x50,
+ 0xa7,
+ 0xd7,
+ 0x2c,
+ 0xd1,
+ 0x93,
+ 0x4d,
+ 0x7f,
+ 0x35,
+ 0xa7,
+ 0xd1,
+ 0xd1,
+ 0x17,
+ 0x99,
+ 0x63,
+ 0xae,
+ 0x8a,
+ 0x4c,
+ 0x5a,
+ 0x50,
+ 0x47,
+ 0xa7,
+ 0x15,
+ 0x5e,
+ 0xbc,
+ 0x09,
+ 0xce,
+ 0x7f,
+ 0x54,
+ 0x70,
+ 0xfc,
+ 0x22,
+ 0xef,
+ 0x86,
+ 0x57,
+ 0xa7,
+ 0x68,
+ 0x01,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x2a,
+ 0x00,
+ 0x00,
+ 0x07,
+ 0x0c,
+ 0x1b,
+ 0xae,
+ 0x1d,
+ 0x63,
+ 0x04,
+ 0x5d,
+ 0x04,
+ 0x05,
+ 0x1a,
+ 0xd4,
+ 0x06,
+ 0xa0,
+ 0x0d,
+ 0x0e,
+ 0x13,
+ 0xec,
+ 0x0f,
+ 0x1b,
+ 0x10,
+ 0xe7,
+ 0x13,
+ 0x40,
+ 0x1f,
+ 0x70,
+ 0x10,
+ 0x3e,
+ 0x11,
+ 0xe2,
+ 0x13,
+ 0x93,
+ 0x07,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0xff,
+ 0xf7,
+ 0x7f,
+ 0x22,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x43,
+ 0x0c,
+ 0xfe,
+ 0x00,
+ 0xe1,
+ 0xcf,
+ 0x43,
+ 0xd7,
+ 0xf1,
+ 0xa4,
+ 0x06,
+ 0x00,
+ 0x65,
+ 0xd1,
+ 0x38,
+ 0x80,
+ 0xc1,
+ 0x1f,
+ 0x10,
+ 0xe0,
+ 0xf7,
+ 0xff,
+ 0xff,
+ 0x80,
+ 0xe1,
+ 0x1b,
+ 0x8a,
+ 0xfa,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xff,
+ 0xbf,
+ 0x2e,
+ 0xe0,
+ 0x9f,
+ 0xab,
+ 0xff,
+ 0xff,
+ 0x7f,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xcf,
+ 0xbf,
+ 0xf8,
+ 0xb9,
+ 0x06,
+ 0x00,
+ 0x5a,
+ 0x5c,
+ 0x39,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xdf,
+ 0xff,
+ 0xff,
+ 0x2e,
+ 0xe0,
+ 0x1f,
+ 0xab,
+ 0xfa,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x9d,
+ 0x4b,
+ 0xe1,
+ 0x0a,
+ 0xa0,
+ 0x06,
+ 0x00,
+ 0x8e,
+ 0xff,
+ 0xff,
+ 0x00,
+ 0xe1,
+ 0xcf,
+ 0x43,
+ 0xd7,
+ 0x70,
+ 0x5c,
+ 0x39,
+ 0x00,
+ 0xc0,
+ 0x1f,
+ 0xd0,
+ 0xeb,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xa3,
+ 0xdb,
+ 0x38,
+ 0x00,
+ 0xc1,
+ 0xdf,
+ 0xd9,
+ 0xeb,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xda,
+ 0xb8,
+ 0x06,
+ 0x00,
+ 0x00,
+ 0xff,
+ 0xff,
+ 0x3c,
+ 0xe1,
+ 0x5f,
+ 0xeb,
+ 0xfe,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xdb,
+ 0x7a,
+ 0x00,
+ 0xc0,
+ 0x1f,
+ 0xdb,
+ 0xeb,
+ 0xf4,
+ 0x01,
+ 0x39,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0x4d,
+ 0xa0,
+ 0x06,
+ 0x00,
+ 0x5b,
+ 0xd4,
+ 0x38,
+ 0x00,
+ 0x80,
+ 0x1f,
+ 0xc0,
+ 0xff,
+ 0x9f,
+ 0xfa,
+ 0xff,
+ 0xac,
+ 0xe1,
+ 0x1f,
+ 0xeb,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xf8,
+ 0xff,
+ 0xff,
+ 0x2c,
+ 0xe1,
+ 0x1f,
+ 0xeb,
+ 0xfe,
+ 0xe2,
+ 0xff,
+ 0xff,
+ 0x2e,
+ 0xe1,
+ 0x9f,
+ 0xab,
+ 0xfa,
+ 0x27,
+ 0xb9,
+ 0x06,
+ 0x00,
+ 0x0d,
+ 0xdd,
+ 0x38,
+ 0xc0,
+ 0xa1,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x26,
+ 0xb9,
+ 0x06,
+ 0x00,
+ 0xfd,
+ 0xff,
+ 0xff,
+ 0x2c,
+ 0xe0,
+ 0x9f,
+ 0x6b,
+ 0xf1,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xf3,
+ 0xb8,
+ 0x06,
+ 0x00,
+ 0xf0,
+ 0x58,
+ 0x39,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xf0,
+ 0x5c,
+ 0x39,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x43,
+ 0xdc,
+ 0x38,
+ 0x00,
+ 0xc0,
+ 0x1f,
+ 0xd0,
+ 0xeb,
+ 0x3f,
+ 0xdc,
+ 0x38,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0x1f,
+ 0xa3,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0x7f,
+ 0xff,
+ 0x2e,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x8d,
+ 0xdf,
+ 0x38,
+ 0x00,
+ 0xc1,
+ 0x1f,
+ 0x10,
+ 0xe0,
+ 0xff,
+ 0xbd,
+ 0x07,
+ 0x00,
+ 0x38,
+ 0xdd,
+ 0x38,
+ 0xc0,
+ 0xa1,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xb1,
+ 0xfe,
+ 0x38,
+ 0xc0,
+ 0xa1,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xe6,
+ 0x2f,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x56,
+ 0x5f,
+ 0x06,
+ 0x00,
+ 0xf8,
+ 0xff,
+ 0xff,
+ 0x2d,
+ 0xe1,
+ 0x5f,
+ 0xeb,
+ 0xfe,
+ 0xf0,
+ 0xff,
+ 0xff,
+ 0x2e,
+ 0xe1,
+ 0x9f,
+ 0xeb,
+ 0xfe,
+ 0x56,
+ 0xb8,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0xdd,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x5d,
+ 0x8b,
+ 0xfe,
+ 0xff,
+ 0xdb,
+ 0x7f,
+ 0x2e,
+ 0xe1,
+ 0x8f,
+ 0x6b,
+ 0xcb,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x67,
+ 0xd9,
+ 0x3a,
+ 0x00,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x42,
+ 0xa0,
+ 0x06,
+ 0x00,
+ 0x9d,
+ 0xf1,
+ 0xef,
+ 0x2b,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xe0,
+ 0xff,
+ 0xff,
+ 0x2f,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xac,
+ 0xdf,
+ 0xfb,
+ 0xff,
+ 0x2c,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x2c,
+ 0xa0,
+ 0x06,
+ 0x00,
+ 0xf7,
+ 0x63,
+ 0x3f,
+ 0x00,
+ 0xc0,
+ 0x9f,
+ 0xd9,
+ 0xeb,
+ 0xef,
+ 0x61,
+ 0x3f,
+ 0x00,
+ 0xc0,
+ 0x9f,
+ 0xd9,
+ 0xeb,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xd7,
+ 0x7a,
+ 0x00,
+ 0xc0,
+ 0xdf,
+ 0xda,
+ 0xeb,
+ 0xe7,
+ 0xff,
+ 0xff,
+ 0x00,
+ 0xe0,
+ 0xdd,
+ 0x0a,
+ 0xf9,
+ 0x81,
+ 0xaf,
+ 0x06,
+ 0x00,
+ 0xef,
+ 0x56,
+ 0x39,
+ 0x00,
+ 0xc0,
+ 0x1f,
+ 0xd0,
+ 0xeb,
+ 0xdf,
+ 0xff,
+ 0xff,
+ 0x2f,
+ 0xe0,
+ 0xdf,
+ 0xab,
+ 0xfa,
+ 0x80,
+ 0xaf,
+ 0x06,
+ 0x00,
+ 0x7f,
+ 0xfd,
+ 0x38,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0x67,
+ 0xf9,
+ 0x38,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0x0d,
+ 0xa0,
+ 0x06,
+ 0x00,
+ 0x77,
+ 0xd5,
+ 0x38,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xff,
+ 0xd9,
+ 0x7f,
+ 0x3f,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x6f,
+ 0xd7,
+ 0x3a,
+ 0x00,
+ 0xc0,
+ 0x9f,
+ 0xdb,
+ 0xeb,
+ 0xff,
+ 0x57,
+ 0x7f,
+ 0x29,
+ 0xa0,
+ 0x9f,
+ 0xc9,
+ 0xe7,
+ 0x0c,
+ 0xa0,
+ 0x06,
+ 0x00,
+ 0x67,
+ 0xd9,
+ 0x3a,
+ 0x00,
+ 0xc0,
+ 0x9f,
+ 0xdb,
+ 0xeb,
+ 0xc0,
+ 0xff,
+ 0xff,
+ 0x28,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xac,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xf9,
+ 0xff,
+ 0xff,
+ 0x2d,
+ 0xe1,
+ 0x9f,
+ 0xaf,
+ 0xfe,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x6b,
+ 0xb8,
+ 0x06,
+ 0x00,
+ 0xf5,
+ 0xff,
+ 0xff,
+ 0x28,
+ 0xe1,
+ 0x9f,
+ 0xaf,
+ 0xfe,
+ 0x90,
+ 0xff,
+ 0xff,
+ 0x29,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x0b,
+ 0xd0,
+ 0x38,
+ 0x00,
+ 0xc0,
+ 0x1f,
+ 0xd0,
+ 0xeb,
+ 0x7b,
+ 0xfa,
+ 0xff,
+ 0xa8,
+ 0xe1,
+ 0x1f,
+ 0xea,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xdb,
+ 0x7a,
+ 0x00,
+ 0xc1,
+ 0x1f,
+ 0x1a,
+ 0xe0,
+ 0x00,
+ 0xff,
+ 0xff,
+ 0x2d,
+ 0xe1,
+ 0x5b,
+ 0xeb,
+ 0xfe,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x07,
+ 0xd0,
+ 0x38,
+ 0x00,
+ 0xc0,
+ 0x1f,
+ 0xd0,
+ 0xeb,
+ 0x6f,
+ 0xfc,
+ 0xff,
+ 0xa8,
+ 0xe1,
+ 0x1f,
+ 0xea,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xd9,
+ 0x7a,
+ 0x00,
+ 0xc1,
+ 0x1f,
+ 0x1a,
+ 0xe0,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xac,
+ 0xe1,
+ 0x1f,
+ 0xeb,
+ 0xe1,
+ 0x5b,
+ 0x92,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0xd9,
+ 0x7f,
+ 0x2d,
+ 0xe1,
+ 0x5f,
+ 0xab,
+ 0xfe,
+ 0xa1,
+ 0xdb,
+ 0x38,
+ 0x00,
+ 0xa1,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xf9,
+ 0xff,
+ 0xff,
+ 0x2f,
+ 0xe1,
+ 0xdf,
+ 0xab,
+ 0xfa,
+ 0xfc,
+ 0xff,
+ 0xff,
+ 0x2f,
+ 0xe1,
+ 0xdf,
+ 0xeb,
+ 0xfe,
+ 0x1e,
+ 0xa0,
+ 0x06,
+ 0x00,
+ 0xfe,
+ 0xff,
+ 0xff,
+ 0x00,
+ 0xe1,
+ 0xdb,
+ 0x8b,
+ 0xfe,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0x00,
+ 0xe1,
+ 0xd7,
+ 0xc3,
+ 0xd6,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xfb,
+ 0xff,
+ 0x26,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xa3,
+ 0xdf,
+ 0x38,
+ 0x00,
+ 0xc1,
+ 0x9f,
+ 0xd9,
+ 0xeb,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xe7,
+ 0xff,
+ 0xff,
+ 0x2f,
+ 0xe1,
+ 0xdf,
+ 0xeb,
+ 0xfa,
+ 0xf7,
+ 0xff,
+ 0xff,
+ 0x2f,
+ 0xe1,
+ 0xdf,
+ 0xeb,
+ 0xff,
+ 0x1e,
+ 0xa0,
+ 0x06,
+ 0x00,
+ 0xef,
+ 0xdf,
+ 0x3a,
+ 0x00,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xd5,
+ 0x7a,
+ 0x00,
+ 0xc1,
+ 0x1f,
+ 0xdb,
+ 0xeb,
+ 0x81,
+ 0xff,
+ 0xff,
+ 0x2c,
+ 0xe1,
+ 0x9f,
+ 0xea,
+ 0xfe,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xf7,
+ 0xff,
+ 0xff,
+ 0x2c,
+ 0xe1,
+ 0x1f,
+ 0xeb,
+ 0xff,
+ 0xf8,
+ 0xff,
+ 0xff,
+ 0x2a,
+ 0xe1,
+ 0x9f,
+ 0xaa,
+ 0xfa,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xfe,
+ 0xff,
+ 0xff,
+ 0x2a,
+ 0xe1,
+ 0x9f,
+ 0xea,
+ 0xfe,
+ 0xff,
+ 0xd5,
+ 0x7f,
+ 0x2c,
+ 0xe1,
+ 0x1f,
+ 0xab,
+ 0xfa,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe0,
+ 0x1f,
+ 0x4b,
+ 0xe6,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe0,
+ 0xdf,
+ 0x79,
+ 0xe4,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xab,
+ 0xdb,
+ 0x38,
+ 0x00,
+ 0xc0,
+ 0x5f,
+ 0x9a,
+ 0xfc,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x2a,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe2,
+ 0xff,
+ 0xcf,
+ 0x7f,
+ 0x27,
+ 0xe0,
+ 0x5f,
+ 0x6b,
+ 0xe3,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xdc,
+ 0xff,
+ 0xff,
+ 0x27,
+ 0xe0,
+ 0xdd,
+ 0xa9,
+ 0xfa,
+ 0xe2,
+ 0xff,
+ 0xff,
+ 0x2a,
+ 0xe0,
+ 0x9f,
+ 0xea,
+ 0xfa,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xd5,
+ 0x7f,
+ 0x2c,
+ 0xe0,
+ 0xcf,
+ 0x69,
+ 0xff,
+ 0x4f,
+ 0xd8,
+ 0x38,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x2e,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe2,
+ 0xff,
+ 0xd9,
+ 0x7f,
+ 0x2c,
+ 0xe0,
+ 0x9f,
+ 0x6b,
+ 0xe3,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xdf,
+ 0xff,
+ 0xff,
+ 0x2c,
+ 0xe0,
+ 0x1d,
+ 0xab,
+ 0xfa,
+ 0xdf,
+ 0xff,
+ 0xff,
+ 0x2e,
+ 0xe0,
+ 0x9f,
+ 0xeb,
+ 0xfa,
+ 0xef,
+ 0xa5,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0xdd,
+ 0x7f,
+ 0x2c,
+ 0xe0,
+ 0x0f,
+ 0x6b,
+ 0xff,
+ 0x2b,
+ 0xce,
+ 0x38,
+ 0x00,
+ 0xc0,
+ 0x1f,
+ 0xd0,
+ 0xeb,
+ 0x94,
+ 0xbb,
+ 0x06,
+ 0x00,
+ 0xdf,
+ 0xfb,
+ 0xff,
+ 0x2c,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0xdf,
+ 0x7a,
+ 0x2c,
+ 0xc0,
+ 0x9f,
+ 0xdb,
+ 0xeb,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xf7,
+ 0x5f,
+ 0x3f,
+ 0x00,
+ 0xa0,
+ 0x9f,
+ 0xc9,
+ 0xe7,
+ 0xf7,
+ 0xdf,
+ 0x3a,
+ 0x2c,
+ 0xc0,
+ 0x9f,
+ 0xdb,
+ 0xeb,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xef,
+ 0x5f,
+ 0x3f,
+ 0x00,
+ 0xa0,
+ 0x9f,
+ 0xc9,
+ 0xe7,
+ 0x2f,
+ 0xcc,
+ 0x38,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xf7,
+ 0xdf,
+ 0x3a,
+ 0x2c,
+ 0xc0,
+ 0x9f,
+ 0xdb,
+ 0xeb,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0x00,
+ 0xe1,
+ 0xdd,
+ 0x0b,
+ 0xf9,
+ 0xfe,
+ 0xff,
+ 0xff,
+ 0x2d,
+ 0xe1,
+ 0x4b,
+ 0x6b,
+ 0xcb,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x5b,
+ 0x7f,
+ 0x00,
+ 0xa0,
+ 0x9f,
+ 0xc9,
+ 0xe7,
+ 0xe7,
+ 0xff,
+ 0xff,
+ 0x26,
+ 0xe0,
+ 0x9f,
+ 0xe9,
+ 0xff,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xf3,
+ 0xff,
+ 0xff,
+ 0x00,
+ 0xe1,
+ 0xd7,
+ 0xc3,
+ 0xd6,
+ 0x7f,
+ 0x5e,
+ 0x3f,
+ 0x00,
+ 0xa0,
+ 0x9f,
+ 0xc9,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xff,
+ 0xbf,
+ 0x2d,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x0f,
+ 0xff,
+ 0xfe,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xcf,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xdb,
+ 0x7f,
+ 0x2d,
+ 0xe0,
+ 0xdf,
+ 0x6b,
+ 0xf1,
+ 0xcc,
+ 0xff,
+ 0xff,
+ 0x2b,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xac,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xe0,
+ 0xff,
+ 0xff,
+ 0x28,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xac,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xd7,
+ 0x7f,
+ 0x2d,
+ 0xe0,
+ 0x5f,
+ 0xab,
+ 0xff,
+ 0xf7,
+ 0xdb,
+ 0x3a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xd1,
+ 0x7a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0xfe,
+ 0x2b,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x00,
+ 0x00,
+ 0xfe,
+ 0x2d,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x49,
+ 0x9d,
+ 0x06,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0xbf,
+ 0x2a,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x00,
+ 0x80,
+ 0xff,
+ 0x7f,
+ 0x80,
+ 0x3e,
+ 0xce,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xdf,
+ 0xbf,
+ 0x2a,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0x5d,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xcf,
+ 0xbf,
+ 0x49,
+ 0x3d,
+ 0x06,
+ 0x00,
+ 0xb0,
+ 0xff,
+ 0xff,
+ 0x2b,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xc0,
+ 0xff,
+ 0xff,
+ 0x2a,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xac,
+ 0x49,
+ 0x3d,
+ 0x06,
+ 0x00,
+ 0x2f,
+ 0xd4,
+ 0x38,
+ 0x00,
+ 0xc0,
+ 0x1f,
+ 0xd0,
+ 0xeb,
+ 0x67,
+ 0x5e,
+ 0x3f,
+ 0x00,
+ 0xc0,
+ 0x9f,
+ 0xda,
+ 0xeb,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xdf,
+ 0xfb,
+ 0xff,
+ 0x2c,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xf7,
+ 0xdf,
+ 0x3a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xd1,
+ 0x7a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x2f,
+ 0xd4,
+ 0x38,
+ 0x00,
+ 0xc0,
+ 0x1f,
+ 0xd0,
+ 0xeb,
+ 0xf7,
+ 0x5f,
+ 0x3f,
+ 0x00,
+ 0xc0,
+ 0x9f,
+ 0xda,
+ 0xeb,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xef,
+ 0x5b,
+ 0x3f,
+ 0x00,
+ 0xc0,
+ 0x9f,
+ 0xda,
+ 0xeb,
+ 0x00,
+ 0xff,
+ 0xff,
+ 0x2f,
+ 0xe1,
+ 0xdf,
+ 0xeb,
+ 0xfe,
+ 0x48,
+ 0xba,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0xdf,
+ 0x7a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xf7,
+ 0xdb,
+ 0x3a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0x47,
+ 0xba,
+ 0x06,
+ 0x00,
+ 0xe7,
+ 0xff,
+ 0xff,
+ 0x26,
+ 0xe0,
+ 0x9f,
+ 0xe9,
+ 0xff,
+ 0xf4,
+ 0xff,
+ 0xff,
+ 0x00,
+ 0xe1,
+ 0xcf,
+ 0x03,
+ 0xd7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xf7,
+ 0x81,
+ 0x3a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0xdf,
+ 0x7a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x2b,
+ 0xe0,
+ 0xdf,
+ 0xeb,
+ 0xf3,
+ 0x00,
+ 0x00,
+ 0xfe,
+ 0x2d,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x49,
+ 0x9d,
+ 0x06,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0xbf,
+ 0x2a,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x00,
+ 0x80,
+ 0xff,
+ 0x7f,
+ 0x80,
+ 0x3e,
+ 0xce,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xdf,
+ 0xbf,
+ 0x2a,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0x5d,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xcf,
+ 0xbf,
+ 0x49,
+ 0x3d,
+ 0x06,
+ 0x00,
+ 0xb0,
+ 0xff,
+ 0xff,
+ 0x2b,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xc0,
+ 0xff,
+ 0xff,
+ 0x2a,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xac,
+ 0x49,
+ 0x3d,
+ 0x06,
+ 0x00,
+ 0xcc,
+ 0xff,
+ 0xff,
+ 0x2d,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xac,
+ 0xff,
+ 0xe5,
+ 0x7f,
+ 0x2a,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x67,
+ 0x5e,
+ 0x3f,
+ 0x00,
+ 0xc0,
+ 0x9f,
+ 0xda,
+ 0xeb,
+ 0xff,
+ 0xdb,
+ 0x7f,
+ 0x2d,
+ 0xe0,
+ 0xdf,
+ 0xab,
+ 0xff,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xfe,
+ 0xff,
+ 0xff,
+ 0x2a,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0xd5,
+ 0x7f,
+ 0x2d,
+ 0xe0,
+ 0x5f,
+ 0x6b,
+ 0xf1,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xdf,
+ 0xfb,
+ 0xff,
+ 0x2c,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xe0,
+ 0xff,
+ 0xff,
+ 0x29,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xac,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xf7,
+ 0xdb,
+ 0x3a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0xd3,
+ 0x7a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xf7,
+ 0xdf,
+ 0x3a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0xd3,
+ 0x7a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x00,
+ 0xff,
+ 0xff,
+ 0x31,
+ 0xe1,
+ 0x5f,
+ 0xec,
+ 0xfe,
+ 0xff,
+ 0xe3,
+ 0x7a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xc3,
+ 0xb2,
+ 0x06,
+ 0x00,
+ 0xf7,
+ 0xe1,
+ 0x3a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xc2,
+ 0xb2,
+ 0x06,
+ 0x00,
+ 0x0a,
+ 0x02,
+ 0xff,
+ 0x2e,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x7f,
+ 0xfd,
+ 0xff,
+ 0x2c,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xfa,
+ 0x3a,
+ 0x06,
+ 0x00,
+ 0x39,
+ 0x1f,
+ 0xfe,
+ 0x00,
+ 0xe1,
+ 0xcf,
+ 0x03,
+ 0xd7,
+ 0xe7,
+ 0xff,
+ 0xff,
+ 0x2e,
+ 0xe0,
+ 0x9f,
+ 0xeb,
+ 0xfa,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xee,
+ 0xff,
+ 0xff,
+ 0x2d,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xac,
+ 0xff,
+ 0xdb,
+ 0x7a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x2b,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x2d,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x11,
+ 0x20,
+ 0x06,
+ 0x00,
+ 0x17,
+ 0xfc,
+ 0xbf,
+ 0x2d,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xcf,
+ 0xbf,
+ 0x11,
+ 0x80,
+ 0x06,
+ 0x00,
+ 0xfc,
+ 0xff,
+ 0xff,
+ 0x2b,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xe3,
+ 0xff,
+ 0xff,
+ 0x2b,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xee,
+ 0xff,
+ 0xff,
+ 0x2d,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x11,
+ 0x20,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0xff,
+ 0xbf,
+ 0x2d,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0xff,
+ 0xef,
+ 0xff,
+ 0xaa,
+ 0xff,
+ 0xcf,
+ 0xbf,
+ 0x11,
+ 0x80,
+ 0x06,
+ 0x00,
+ 0xf1,
+ 0xff,
+ 0xff,
+ 0x2b,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xff,
+ 0xbf,
+ 0x2d,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0xff,
+ 0x9f,
+ 0xef,
+ 0xd5,
+ 0xfe,
+ 0xcf,
+ 0xbf,
+ 0x11,
+ 0x80,
+ 0x06,
+ 0x00,
+ 0xf0,
+ 0xff,
+ 0xff,
+ 0x2b,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x2b,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xfe,
+ 0xff,
+ 0xff,
+ 0x2d,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0x11,
+ 0x20,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x56,
+ 0x5f,
+ 0x06,
+ 0x00,
+ 0x0a,
+ 0x02,
+ 0xff,
+ 0x2e,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xe7,
+ 0xff,
+ 0xff,
+ 0x2e,
+ 0xe0,
+ 0x9f,
+ 0xeb,
+ 0xfa,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xe0,
+ 0xff,
+ 0xff,
+ 0x29,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xac,
+ 0xdf,
+ 0xfb,
+ 0xff,
+ 0x2c,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xd7,
+ 0x7f,
+ 0x2b,
+ 0xe1,
+ 0x5f,
+ 0xaa,
+ 0xff,
+ 0xf7,
+ 0xdb,
+ 0x3a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xfb,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xd7,
+ 0x7a,
+ 0x2c,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xdb,
+ 0xf7,
+ 0xff,
+ 0x3e,
+ 0xe0,
+ 0x1f,
+ 0x2b,
+ 0xfb,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xe6,
+ 0x58,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0xd1,
+ 0x7f,
+ 0x28,
+ 0xe0,
+ 0x1f,
+ 0x6b,
+ 0xf1,
+ 0x67,
+ 0xd1,
+ 0x3a,
+ 0x00,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0x46,
+ 0xa1,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x45,
+ 0xa1,
+ 0x06,
+ 0x00,
+ 0xf8,
+ 0xff,
+ 0xff,
+ 0x00,
+ 0xe1,
+ 0x9d,
+ 0x0b,
+ 0xf9,
+ 0xfe,
+ 0xff,
+ 0xff,
+ 0x00,
+ 0xe1,
+ 0xcf,
+ 0x43,
+ 0xd7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x2b,
+ 0xce,
+ 0x38,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x97,
+ 0x5b,
+ 0x02,
+ 0x00,
+ 0x57,
+ 0xdc,
+ 0x38,
+ 0x00,
+ 0xc0,
+ 0xdf,
+ 0xdb,
+ 0xeb,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x9b,
+ 0x5b,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xbc,
+ 0xa8,
+ 0x3e,
+ 0x11,
+ 0x69,
+ 0xce,
+ 0x06,
+ 0x3f,
+ 0xb9,
+ 0x87,
+ 0xd7,
+ 0xdd,
+ 0xc6,
+ 0x12,
+ 0xb6,
+ 0xe2,
+ 0xc2,
+ 0x53,
+ 0x20,
+ 0xfb,
+ 0xea,
+ 0x71,
+ 0x72,
+ 0xb5,
+ 0xe1,
+ 0xa6,
+ 0xd8,
+ 0xee,
+ 0x9d,
+ 0x97,
+ 0xe6,
+ 0x72,
+ 0x3f,
+ 0x73,
+ 0x88,
+ 0xed,
+ 0x14,
+ 0x8c,
+ 0xdf,
+ 0x5d,
+ 0x8f,
+ 0x0d,
+ 0xd0,
+ 0x70,
+ 0x64,
+ 0x1c,
+ 0x06,
+ 0x7f,
+ 0x59,
+ 0x93,
+ 0x32,
+ 0x55,
+ 0x2a,
+ 0x10,
+ 0x61,
+ 0xde,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+};
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbMicrocodePatch07000106_Enc.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbMicrocodePatch07000106_Enc.c
new file mode 100644
index 0000000..85bdc4e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbMicrocodePatch07000106_Enc.c
@@ -0,0 +1,3539 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD F16Kb Microcode patch.
+ *
+ * F16Kb Microcode Patch rev 07000106 for 7001 or equivalent.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 86822 $ @e \$Date: 2013-01-28 00:17:14 -0500 (Mon, 28 Jan 2013) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+// Encrypt Patch code 07000106 for 7001 and equivalent
+
+CONST UINT8 ROMDATA arr2 [IDS_PAD_4K] =
+{
+ 0x13,
+ 0x20,
+ 0x22,
+ 0x01,
+ 0x06,
+ 0x01,
+ 0x00,
+ 0x07,
+ 0x03,
+ 0x80,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x01,
+ 0x70,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0xaa,
+ 0xaa,
+ 0xaa,
+ 0x49,
+ 0x66,
+ 0xa8,
+ 0x8e,
+ 0x7a,
+ 0x20,
+ 0xc7,
+ 0xae,
+ 0xe4,
+ 0xf4,
+ 0xb4,
+ 0x4a,
+ 0x32,
+ 0x58,
+ 0xbb,
+ 0x8b,
+ 0x60,
+ 0x57,
+ 0x0e,
+ 0x35,
+ 0x36,
+ 0xda,
+ 0x53,
+ 0x69,
+ 0xb7,
+ 0xaf,
+ 0x84,
+ 0xe0,
+ 0x66,
+ 0x54,
+ 0x71,
+ 0x2a,
+ 0xef,
+ 0x0f,
+ 0xf0,
+ 0x0e,
+ 0x9d,
+ 0x5a,
+ 0xbe,
+ 0xbe,
+ 0x19,
+ 0x2a,
+ 0xe1,
+ 0x53,
+ 0xdf,
+ 0x30,
+ 0x15,
+ 0xe9,
+ 0x9e,
+ 0xa2,
+ 0xb4,
+ 0x74,
+ 0x0f,
+ 0xfa,
+ 0x38,
+ 0x6e,
+ 0x5c,
+ 0x08,
+ 0xa5,
+ 0xe5,
+ 0xd7,
+ 0xc3,
+ 0x24,
+ 0x04,
+ 0x5c,
+ 0x6e,
+ 0xf5,
+ 0x57,
+ 0xb6,
+ 0x2e,
+ 0x41,
+ 0x1d,
+ 0x5d,
+ 0xa2,
+ 0x62,
+ 0x9c,
+ 0xce,
+ 0x79,
+ 0xfb,
+ 0xd8,
+ 0xda,
+ 0x01,
+ 0x36,
+ 0xfe,
+ 0xcf,
+ 0x18,
+ 0x78,
+ 0xcd,
+ 0x8b,
+ 0x49,
+ 0x92,
+ 0x0a,
+ 0x59,
+ 0x40,
+ 0x8f,
+ 0xc9,
+ 0x3e,
+ 0xf6,
+ 0xd7,
+ 0xea,
+ 0x78,
+ 0x89,
+ 0xc1,
+ 0xea,
+ 0xf8,
+ 0x2e,
+ 0x35,
+ 0xf8,
+ 0xfb,
+ 0x15,
+ 0x48,
+ 0x8f,
+ 0x07,
+ 0xd4,
+ 0x3f,
+ 0x1f,
+ 0x85,
+ 0x38,
+ 0x87,
+ 0x17,
+ 0x38,
+ 0x23,
+ 0x9b,
+ 0xcc,
+ 0x4a,
+ 0xea,
+ 0xfd,
+ 0x49,
+ 0x5a,
+ 0xfe,
+ 0xb6,
+ 0x11,
+ 0x21,
+ 0xa6,
+ 0x5d,
+ 0x26,
+ 0x5a,
+ 0x2e,
+ 0xc9,
+ 0x49,
+ 0x4a,
+ 0x2a,
+ 0x5b,
+ 0xc7,
+ 0x8f,
+ 0xde,
+ 0x65,
+ 0x27,
+ 0xfd,
+ 0x9d,
+ 0x59,
+ 0x02,
+ 0xf9,
+ 0xad,
+ 0x13,
+ 0x4a,
+ 0x19,
+ 0xb9,
+ 0x63,
+ 0x1b,
+ 0x94,
+ 0xd8,
+ 0x24,
+ 0x87,
+ 0xd2,
+ 0xfc,
+ 0x1d,
+ 0x4f,
+ 0xa2,
+ 0xf1,
+ 0xf1,
+ 0x4e,
+ 0x1a,
+ 0x8e,
+ 0x7a,
+ 0xbd,
+ 0xaf,
+ 0xd4,
+ 0x24,
+ 0x07,
+ 0x3b,
+ 0x43,
+ 0x2d,
+ 0xe3,
+ 0xbf,
+ 0xc3,
+ 0x03,
+ 0x4c,
+ 0x81,
+ 0x9b,
+ 0xec,
+ 0x8a,
+ 0x91,
+ 0x7b,
+ 0x1c,
+ 0xe0,
+ 0x70,
+ 0xa4,
+ 0x3f,
+ 0x83,
+ 0x4d,
+ 0xa5,
+ 0x4b,
+ 0x9d,
+ 0xbe,
+ 0xfe,
+ 0xdf,
+ 0xed,
+ 0xb8,
+ 0xa9,
+ 0x0e,
+ 0xe1,
+ 0x11,
+ 0x71,
+ 0x4d,
+ 0xfa,
+ 0x27,
+ 0x32,
+ 0x5c,
+ 0xd1,
+ 0xe9,
+ 0x84,
+ 0xbb,
+ 0xeb,
+ 0x65,
+ 0x19,
+ 0x09,
+ 0xc9,
+ 0x2f,
+ 0x0c,
+ 0x80,
+ 0x14,
+ 0x3f,
+ 0x94,
+ 0x1f,
+ 0xcd,
+ 0xaf,
+ 0x29,
+ 0x51,
+ 0x7c,
+ 0x88,
+ 0x36,
+ 0xf3,
+ 0xcb,
+ 0x41,
+ 0x20,
+ 0xcb,
+ 0x4c,
+ 0x1c,
+ 0x4b,
+ 0xb2,
+ 0xaa,
+ 0x6c,
+ 0x2c,
+ 0xab,
+ 0x37,
+ 0x5b,
+ 0x2a,
+ 0x58,
+ 0x44,
+ 0x53,
+ 0xdf,
+ 0x59,
+ 0xbc,
+ 0x14,
+ 0xe3,
+ 0x7f,
+ 0xd6,
+ 0x4a,
+ 0xd6,
+ 0x98,
+ 0x59,
+ 0x8c,
+ 0xbb,
+ 0xce,
+ 0xe6,
+ 0x86,
+ 0xdb,
+ 0x66,
+ 0xbd,
+ 0xeb,
+ 0x51,
+ 0xf1,
+ 0xce,
+ 0x80,
+ 0x0f,
+ 0xd9,
+ 0x83,
+ 0x86,
+ 0x17,
+ 0xed,
+ 0x78,
+ 0x3e,
+ 0x5d,
+ 0xac,
+ 0xd1,
+ 0x13,
+ 0xfa,
+ 0x01,
+ 0x58,
+ 0x35,
+ 0xe9,
+ 0x66,
+ 0x16,
+ 0x5d,
+ 0xa8,
+ 0x70,
+ 0x08,
+ 0x0e,
+ 0xa3,
+ 0xab,
+ 0x3b,
+ 0xd1,
+ 0x75,
+ 0xbf,
+ 0x2f,
+ 0xb2,
+ 0x9a,
+ 0x7c,
+ 0xd8,
+ 0x84,
+ 0x66,
+ 0x1a,
+ 0x07,
+ 0x00,
+ 0xe0,
+ 0x04,
+ 0xbf,
+ 0x0e,
+ 0x04,
+ 0xaa,
+ 0x0e,
+ 0x91,
+ 0x6f,
+ 0xb4,
+ 0xb8,
+ 0xff,
+ 0xfa,
+ 0xad,
+ 0xb0,
+ 0xd8,
+ 0x41,
+ 0x65,
+ 0xf5,
+ 0xd5,
+ 0x0d,
+ 0x12,
+ 0x15,
+ 0xbf,
+ 0x40,
+ 0x5b,
+ 0xed,
+ 0xeb,
+ 0x81,
+ 0x2a,
+ 0x1f,
+ 0x48,
+ 0x00,
+ 0x5b,
+ 0xf7,
+ 0x08,
+ 0x35,
+ 0x86,
+ 0x8d,
+ 0xe4,
+ 0x15,
+ 0x52,
+ 0x40,
+ 0x1b,
+ 0x88,
+ 0x5a,
+ 0x8f,
+ 0xd0,
+ 0x4f,
+ 0xb5,
+ 0xbc,
+ 0xdb,
+ 0x45,
+ 0x30,
+ 0xc5,
+ 0x89,
+ 0x32,
+ 0x98,
+ 0xf9,
+ 0xa7,
+ 0x18,
+ 0x27,
+ 0xf1,
+ 0x0b,
+ 0xc7,
+ 0x6d,
+ 0xeb,
+ 0x7f,
+ 0x39,
+ 0xd2,
+ 0x25,
+ 0x99,
+ 0x6d,
+ 0x3a,
+ 0x1b,
+ 0x24,
+ 0xa4,
+ 0xc5,
+ 0x7c,
+ 0xdf,
+ 0x33,
+ 0x3d,
+ 0x7c,
+ 0x43,
+ 0x40,
+ 0x5b,
+ 0x8d,
+ 0xd1,
+ 0xec,
+ 0x0c,
+ 0xca,
+ 0x76,
+ 0xd9,
+ 0x1a,
+ 0x32,
+ 0xee,
+ 0x45,
+ 0xee,
+ 0xb6,
+ 0x30,
+ 0x21,
+ 0xf8,
+ 0x66,
+ 0xb5,
+ 0xbf,
+ 0xfb,
+ 0x66,
+ 0x13,
+ 0x9c,
+ 0xf0,
+ 0xcf,
+ 0xae,
+ 0xca,
+ 0x54,
+ 0xbc,
+ 0xf1,
+ 0xce,
+ 0x76,
+ 0x57,
+ 0x8d,
+ 0xf5,
+ 0xee,
+ 0x02,
+ 0x14,
+ 0xc0,
+ 0x62,
+ 0x3f,
+ 0xa1,
+ 0xad,
+ 0x9d,
+ 0xbb,
+ 0x83,
+ 0x3d,
+ 0x8f,
+ 0xf2,
+ 0xe9,
+ 0x41,
+ 0x42,
+ 0xca,
+ 0x04,
+ 0xf9,
+ 0xf7,
+ 0x4f,
+ 0xf7,
+ 0xc6,
+ 0x77,
+ 0xf0,
+ 0x0e,
+ 0x8c,
+ 0xea,
+ 0xb6,
+ 0x6c,
+ 0x47,
+ 0xae,
+ 0xd1,
+ 0x1b,
+ 0x2c,
+ 0x89,
+ 0xbf,
+ 0x4b,
+ 0x61,
+ 0xdc,
+ 0x2d,
+ 0x06,
+ 0x6d,
+ 0x79,
+ 0x5c,
+ 0x5e,
+ 0x82,
+ 0xc0,
+ 0x4f,
+ 0x54,
+ 0x5d,
+ 0x68,
+ 0x55,
+ 0x5b,
+ 0x1c,
+ 0x75,
+ 0xb6,
+ 0xcc,
+ 0x4b,
+ 0xb6,
+ 0x3e,
+ 0x2b,
+ 0xec,
+ 0x30,
+ 0xa7,
+ 0x90,
+ 0xd8,
+ 0x99,
+ 0x44,
+ 0x85,
+ 0xe7,
+ 0x21,
+ 0x33,
+ 0x00,
+ 0x48,
+ 0xf3,
+ 0xbb,
+ 0x92,
+ 0xe9,
+ 0x48,
+ 0x99,
+ 0x45,
+ 0x66,
+ 0xd5,
+ 0xe6,
+ 0xd9,
+ 0x9e,
+ 0x92,
+ 0x8b,
+ 0x42,
+ 0x94,
+ 0xa3,
+ 0x2f,
+ 0x44,
+ 0xb1,
+ 0x5e,
+ 0x07,
+ 0xd7,
+ 0x0a,
+ 0xb4,
+ 0x7b,
+ 0x49,
+ 0x7e,
+ 0x15,
+ 0xab,
+ 0x34,
+ 0x6b,
+ 0xff,
+ 0x1f,
+ 0xcf,
+ 0x84,
+ 0x7f,
+ 0x57,
+ 0x6c,
+ 0xdb,
+ 0xc3,
+ 0x3e,
+ 0xc1,
+ 0xef,
+ 0x05,
+ 0xea,
+ 0x39,
+ 0xe0,
+ 0xe6,
+ 0x15,
+ 0x4f,
+ 0x9a,
+ 0xdd,
+ 0x93,
+ 0x01,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x06,
+ 0x01,
+ 0x00,
+ 0x07,
+ 0xe2,
+ 0x13,
+ 0xe7,
+ 0x13,
+ 0x93,
+ 0x07,
+ 0x66,
+ 0x04,
+ 0x60,
+ 0x04,
+ 0xd7,
+ 0x19,
+ 0x04,
+ 0x07,
+ 0xf0,
+ 0x0c,
+ 0xf0,
+ 0x0c,
+ 0xf0,
+ 0x0c,
+ 0xf0,
+ 0x0c,
+ 0xf0,
+ 0x0c,
+ 0xf0,
+ 0x0c,
+ 0xf0,
+ 0x0c,
+ 0xf0,
+ 0x0c,
+ 0xf0,
+ 0x0c,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x6f,
+ 0xd7,
+ 0x3a,
+ 0x00,
+ 0xc0,
+ 0x9f,
+ 0xdb,
+ 0xeb,
+ 0xff,
+ 0x57,
+ 0x7f,
+ 0x29,
+ 0xa0,
+ 0x9f,
+ 0xc9,
+ 0xe7,
+ 0x55,
+ 0xa0,
+ 0x06,
+ 0x00,
+ 0x67,
+ 0xd9,
+ 0x3a,
+ 0x00,
+ 0xc0,
+ 0x9f,
+ 0xdb,
+ 0xeb,
+ 0xc0,
+ 0xff,
+ 0xff,
+ 0x28,
+ 0xe0,
+ 0x1f,
+ 0xe0,
+ 0xac,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x67,
+ 0xd9,
+ 0x3a,
+ 0x00,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x17,
+ 0xac,
+ 0x06,
+ 0x00,
+ 0x9d,
+ 0xf1,
+ 0xef,
+ 0x2b,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x16,
+ 0xac,
+ 0x06,
+ 0x00,
+ 0xf9,
+ 0xff,
+ 0xff,
+ 0x2d,
+ 0xe1,
+ 0x9f,
+ 0xaf,
+ 0xfe,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x6b,
+ 0xb8,
+ 0x06,
+ 0x00,
+ 0xf5,
+ 0xff,
+ 0xff,
+ 0x28,
+ 0xe1,
+ 0x9f,
+ 0xaf,
+ 0xfe,
+ 0x90,
+ 0xff,
+ 0xff,
+ 0x29,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xdf,
+ 0xff,
+ 0xff,
+ 0x2e,
+ 0xe0,
+ 0x1f,
+ 0xab,
+ 0xfa,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x9d,
+ 0x4b,
+ 0xe1,
+ 0x53,
+ 0xa0,
+ 0x06,
+ 0x00,
+ 0xd9,
+ 0xff,
+ 0xff,
+ 0x00,
+ 0xe1,
+ 0xcf,
+ 0x43,
+ 0xd7,
+ 0x70,
+ 0x5c,
+ 0x39,
+ 0x00,
+ 0xc0,
+ 0x1f,
+ 0xd0,
+ 0xeb,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xa3,
+ 0xdb,
+ 0x38,
+ 0x00,
+ 0xc1,
+ 0xdf,
+ 0xd9,
+ 0xeb,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xd7,
+ 0xb8,
+ 0x06,
+ 0x00,
+ 0x00,
+ 0xff,
+ 0xff,
+ 0x3c,
+ 0xe1,
+ 0x5f,
+ 0xeb,
+ 0xfe,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xdd,
+ 0x7f,
+ 0x2c,
+ 0xe0,
+ 0x0f,
+ 0x6b,
+ 0xff,
+ 0x4b,
+ 0xd8,
+ 0x38,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0x91,
+ 0xbb,
+ 0x06,
+ 0x00,
+ 0x2b,
+ 0xce,
+ 0x38,
+ 0x00,
+ 0xc0,
+ 0x1f,
+ 0xd0,
+ 0xeb,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x90,
+ 0xbb,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x29,
+ 0xe1,
+ 0x4f,
+ 0x2a,
+ 0xca,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x2d,
+ 0xe1,
+ 0x4f,
+ 0x2b,
+ 0xca,
+ 0xfa,
+ 0xb8,
+ 0x06,
+ 0x00,
+ 0xfb,
+ 0xff,
+ 0xff,
+ 0x2d,
+ 0xe1,
+ 0xdf,
+ 0xab,
+ 0xfe,
+ 0x23,
+ 0xd3,
+ 0x38,
+ 0x00,
+ 0xc1,
+ 0x1d,
+ 0x00,
+ 0xf9,
+ 0x19,
+ 0xa1,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x76,
+ 0x5e,
+ 0x39,
+ 0x00,
+ 0xc0,
+ 0x1f,
+ 0xd0,
+ 0xeb,
+ 0xf5,
+ 0xff,
+ 0xff,
+ 0x2e,
+ 0xe1,
+ 0x1f,
+ 0xe0,
+ 0xac,
+ 0x93,
+ 0xbf,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0xdd,
+ 0x7f,
+ 0x2f,
+ 0xe0,
+ 0xdf,
+ 0xab,
+ 0xff,
+ 0x76,
+ 0x5e,
+ 0x39,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0xd1,
+ 0x7f,
+ 0x28,
+ 0xe0,
+ 0x1f,
+ 0x6b,
+ 0xf1,
+ 0x67,
+ 0xd1,
+ 0x3a,
+ 0x00,
+ 0xa0,
+ 0x9f,
+ 0xcb,
+ 0xe7,
+ 0x33,
+ 0xa1,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x32,
+ 0xa1,
+ 0x06,
+ 0x00,
+ 0xf8,
+ 0xff,
+ 0xff,
+ 0x00,
+ 0xe1,
+ 0x9d,
+ 0x0b,
+ 0xf9,
+ 0xfe,
+ 0xff,
+ 0xff,
+ 0x00,
+ 0xe1,
+ 0xcf,
+ 0x43,
+ 0xd7,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x2b,
+ 0xce,
+ 0x38,
+ 0x00,
+ 0xa0,
+ 0x1f,
+ 0xc0,
+ 0xe7,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x94,
+ 0x5b,
+ 0x02,
+ 0x00,
+ 0x57,
+ 0xdc,
+ 0x38,
+ 0x00,
+ 0xc0,
+ 0xdf,
+ 0xdb,
+ 0xeb,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0x98,
+ 0x5b,
+ 0x06,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0x81,
+ 0x7f,
+ 0x00,
+ 0xe1,
+ 0x1f,
+ 0xc0,
+ 0xbf,
+ 0xff,
+ 0xbf,
+ 0x07,
+ 0x00,
+ 0x13,
+ 0x42,
+ 0x99,
+ 0xf4,
+ 0x9c,
+ 0x43,
+ 0x10,
+ 0xb9,
+ 0x93,
+ 0x17,
+ 0x40,
+ 0x75,
+ 0x1b,
+ 0x3d,
+ 0x9e,
+ 0xa9,
+ 0x4f,
+ 0xbf,
+ 0xac,
+ 0x60,
+ 0x92,
+ 0x6b,
+ 0xbb,
+ 0x51,
+ 0x50,
+ 0x1a,
+ 0x56,
+ 0xc0,
+ 0x34,
+ 0x59,
+ 0xb6,
+ 0x4a,
+ 0x30,
+ 0x0a,
+ 0x21,
+ 0xa2,
+ 0x14,
+ 0x1f,
+ 0x8d,
+ 0x89,
+ 0xc4,
+ 0x82,
+ 0xb0,
+ 0x5c,
+ 0x8d,
+ 0x49,
+ 0x3d,
+ 0xb8,
+ 0x34,
+ 0x7a,
+ 0x54,
+ 0xb2,
+ 0xc2,
+ 0x0e,
+ 0x5b,
+ 0xbc,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+};
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbMicrocodePatchTables.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbMicrocodePatchTables.c
new file mode 100644
index 0000000..4790709
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbMicrocodePatchTables.c
@@ -0,0 +1,111 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini microcode patches
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBMICROCODEPATCHTABLES_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST MICROCODE_PATCHES_4K ROMDATA *CpuF16KbMicroCodePatchArray[];
+extern CONST UINT8 ROMDATA CpuF16KbNumberOfMicrocodePatches;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF16KbMicroCodePatchesStruct (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **KbUcodePtr,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns a table containing the appropriate microcode patches.
+ *
+ * @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] KbUcodePtr Points to the first entry in the table.
+ * @param[out] NumberOfElements Number of valid entries in the table.
+ * @param[in] StdHeader Header for library and services.
+ *
+ */
+VOID
+GetF16KbMicroCodePatchesStruct (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **KbUcodePtr,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *NumberOfElements = CpuF16KbNumberOfMicrocodePatches;
+ *KbUcodePtr = &CpuF16KbMicroCodePatchArray[0];
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbMsrTables.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbMsrTables.c
new file mode 100644
index 0000000..12dd300
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbMsrTables.c
@@ -0,0 +1,264 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 KB MSR tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/FAMILY/0x16/KB
+ * @e \$Revision: 87267 $ @e \$Date: 2013-01-31 09:34:00 -0600 (Thu, 31 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "F16KbPowerMgmt.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBMSRTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+NbMcaLock (
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+// M S R T a b l e s
+// ----------------------
+
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F16KbMsrRegisters[] =
+{
+// MSR_TOM2 (0xC001001D)
+// bits[39:23] TOP_MEM2 = 0x0
+ {
+ MsrRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MSR_TOM2, // Address
+ 0x0000000000000000, // RegData
+ 0xFFFFFFFFFF800000, // RegMask
+ }}
+ },
+
+// MSR_SYS_CFG (0xC0010010)
+// bits[21] MtrrTom2En = 0x1
+ {
+ MsrRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MSR_SYS_CFG, // Address
+ (1 << 21), // RegData
+ (1 << 21), // RegMask
+ }}
+ },
+// MC4_MISC_1 (0xC0000408)
+// Clear to 0
+ {
+ MsrRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ 0xC0000408, // Address
+ 0x0000000000000000, // RegData
+ 0xFF0FFFFFFFFFFFFF, // RegMask
+ }}
+ },
+// MSR_LS_CFG (C0011020)
+// bits[26] = 0x1
+ {
+ MsrRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MSR_LS_CFG, // Address
+ 0x0000000004000000, // RegData
+ 0x0000000004000000, // RegMask
+ }}
+ },
+// MSR_IC_CFG (C0011021)
+// bits[26] DIS_WIDEREAD_PWR_SAVE = 0x1
+ {
+ MsrRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MSR_IC_CFG, // Address
+ 0x0000000004000000, // RegData
+ 0x0000000004000000, // RegMask
+ }}
+ },
+// Processor Feedback Constants 0 (C0011090)
+// bits[15:8] RefCountScale = 0x64
+// bits[7:0] ActualCountScale = 0xA5
+ {
+ MsrRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ 0xC0011090, // Address
+ 0x00000000000064A5, // RegData
+ 0x000000000000FFFF, // RegMask
+ }}
+ },
+// MSR_L2I_CFG (C00110A0)
+// bits[56:45] L2ScrubberInterval = 0x100
+// bits[44] PbDisObeysThrottleNb = 0x1
+// bits[43:40] ThrottleNbInterface = 0x0
+// bits[19] McaToMstCoreEn = 0x1
+ {
+ MsrRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MSR_L2I_CFG, // Address
+ 0x0020100000080000, // RegData
+ 0x01FFFF0000080000, // RegMask
+ }}
+ },
+};
+
+// MSR with Special Programming Requirements Table
+// ----------------------
+
+STATIC CONST FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_INITIALIZER ROMDATA F16KbMsrWorkarounds[] =
+{
+// MSR_0000_0413
+ {
+ FamSpecificWorkaround,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ NbMcaLock, // Function call
+ 0x00000000, // Data
+ }}
+ },
+};
+
+CONST REGISTER_TABLE ROMDATA F16KbMsrRegisterTable = {
+ AllCores,
+ PERFORM_TP_AFTER_AP_LAUNCH,
+ (sizeof (F16KbMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+ (TABLE_ENTRY_FIELDS *) &F16KbMsrRegisters,
+};
+
+CONST REGISTER_TABLE ROMDATA F16KbMsrWorkaroundTable = {
+ AllCores,
+ PERFORM_TP_AFTER_AP_LAUNCH,
+ (sizeof (F16KbMsrWorkarounds) / sizeof (TABLE_ENTRY_FIELDS)),
+ (TABLE_ENTRY_FIELDS *) F16KbMsrWorkarounds,
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * MSR special programming requirements for MSR_0000_0413
+ *
+ *
+ * @param[in] Data The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+NbMcaLock (
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ MC4_MISC0_MSR Mc4Misc0;
+
+ LibAmdMsrRead (MSR_MC4_MISC, (UINT64 *) &Mc4Misc0, StdHeader);
+
+ if (Mc4Misc0.IntType == 0x2) {
+ Mc4Misc0.Locked = 1;
+ } else {
+ Mc4Misc0.Locked = 0;
+ }
+ LibAmdMsrWrite (MSR_MC4_MISC, (UINT64 *) &Mc4Misc0, StdHeader);
+
+ return;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbNbAfterReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbNbAfterReset.c
new file mode 100644
index 0000000..0ab9896
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbNbAfterReset.c
@@ -0,0 +1,365 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini after warm reset sequence for NB P-states
+ *
+ * Performs the "NB COF and VID Transition Sequence After Warm Reset"
+ * as described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuF16PowerMgmt.h"
+#include "F16KbPowerMgmt.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "F16KbNbAfterReset.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbHandleLib.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbRegistersKB.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBNBAFTERRESET_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F16KbPmNbAfterResetOnCore (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+TransitionToNbLow (
+ IN PCI_ADDR PciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+TransitionToNbHigh (
+ IN PCI_ADDR PciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+WaitForNbTransitionToComplete (
+ IN PCI_ADDR PciAddress,
+ IN UINT32 PstateIndex,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 16h Kabini core 0 entry point for performing the necessary steps after
+ * a warm reset has occurred.
+ *
+ * The steps are as follows:
+ *
+ * 1. Temp1=D18F5x170[SwNbPstateLoDis].
+ * 2. Temp2=D18F5x170[NbPstateDisOnP0].
+ * 3. Temp3=D18F5x170[NbPstateThreshold].
+ * 4. Temp4=D18F5x170[NbPstateGnbSlowDis].
+ * 5. If MSRC001_0070[NbPstate]=0, go to step 6. If MSRC001_0070[NbPstate]=1, go to step 11.
+ * 6. Write 1 to D18F5x170[NbPstateGnbSlowDis].
+ * 7. Write 0 to D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold].
+ * 8. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateLo] and D18F5x174[CurNbFid, CurNb-
+ * Did]=[NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateLo].
+ * 9. Set D18F5x170[SwNbPstateLoDis]=1.
+ * 10. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateHi] and D18F5x174[CurNbFid, CurNb-
+ * Did]=[NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateHi]. Go to step 15.
+ * 11. Write 1 to D18F5x170[SwNbPstateLoDis].
+ * 12. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateHi] and D18F5x174[CurNbFid, CurNb-
+ * Did]=[NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateHi].
+ * 13. Write 0 to D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold].
+ * 14. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateLo] and D18F5x174[CurNbFid, CurNb-
+ * Did]=[NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateLo].
+ * 15. Set D18F5x170[SwNbPstateLoDis]=Temp1, D18F5x170[NbPstateDisOnP0]=Temp2, D18F5x170[NbP-
+ * stateThreshold]=Temp3, and D18F5x170[NbPstateGnbSlowDis]=Temp4.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] CpuEarlyParamsPtr Service parameters
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+F16KbPmNbAfterReset (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 Core;
+ UINT32 TaskedCore;
+ UINT32 Ignored;
+ AP_TASK TaskPtr;
+ AGESA_STATUS IgnoredSts;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbPmNbAfterReset\n");
+
+ IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+
+ ASSERT (Core == 0);
+
+ // Launch one core per node.
+ TaskPtr.FuncAddress.PfApTask = F16KbPmNbAfterResetOnCore;
+ TaskPtr.DataTransfer.DataSizeInDwords = 0;
+ TaskPtr.ExeFlags = WAIT_FOR_CORE;
+ for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+ if (GetGivenModuleCoreRange (Socket, Module, &TaskedCore, &Ignored, StdHeader)) {
+ if (TaskedCore != 0) {
+ ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) TaskedCore, &TaskPtr, StdHeader);
+ }
+ }
+ }
+ ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, (VOID *) CpuEarlyParamsPtr);
+}
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F16KbPmNbAfterReset to perform MSR initialization on one
+ * core of each die in a family 16h socket.
+ *
+ * This function implements steps 1 - 15 on each core.
+ *
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F16KbPmNbAfterResetOnCore (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 NbPsCtrlOnEntry;
+ UINT32 NbPsCtrlOnExit;
+ UINT64 LocalMsrRegister;
+ PCI_ADDR PciAddress;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbPmNbAfterResetOnCore\n");
+
+ // 1. Temp1 = D18F5x170[SwNbPstateLoDis].
+ // 2. Temp2 = D18F5x170[NbPstateDisOnP0].
+ // 3. Temp3 = D18F5x170[NbPstateThreshold].
+ // 4. Temp4 = D18F5x170[NbPstateGnbSlowDis].
+ PciAddress.AddressValue = NB_PSTATE_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrlOnEntry, StdHeader);
+
+ // Check if NB P-states were disabled, and if so, prevent any changes from occurring.
+ if (((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnEntry)->SwNbPstateLoDis == 0) {
+ // 5. If MSRC001_0070[NbPstate] = 1, go to step 11
+ LibAmdMsrRead (MSR_COFVID_CTL, &LocalMsrRegister, StdHeader);
+ if (((COFVID_CTRL_MSR *) &LocalMsrRegister)->NbPstate == 0) {
+ // 6. Write 1 to D18F5x170[NbPstateGnbSlowDis].
+ PciAddress.AddressValue = NB_PSTATE_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrlOnExit, StdHeader);
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnExit)->NbPstateGnbSlowDis = 1;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrlOnExit, StdHeader);
+
+ // 7. Write 0 to D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold].
+ // 8. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateLo] and D18F5x174[CurNbFid,
+ // CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateLo].
+ TransitionToNbLow (PciAddress, StdHeader);
+
+ // 9. Set D18F5x170[SwNbPstateLoDis] = 1.
+ // 10. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateHi] and D18F5x174[CurNbFid,
+ // CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateHi].
+ // Go to step 15.
+ TransitionToNbHigh (PciAddress, StdHeader);
+ } else {
+ // 11. Set D18F5x170[SwNbPstateLoDis] = 1.
+ // 12. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateHi] and D18F5x174[CurNbFid,
+ // CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateHi].
+ TransitionToNbHigh (PciAddress, StdHeader);
+
+ // 13. Write 0 to D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold].
+ // 14. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateLo] and D18F5x174[CurNbFid,
+ // CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateLo].
+ TransitionToNbLow (PciAddress, StdHeader);
+ }
+
+ // 15. Set D18F5x170[SwNbPstateLoDis]=Temp1, D18F5x170[NbPstateDisOnP0]=Temp2, D18F5x170[NbP-
+ // stateThreshold]=Temp3, and D18F5x170[NbPstateGnbSlowDis]=Temp4.
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrlOnExit, StdHeader);
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnExit)->SwNbPstateLoDis = ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnEntry)->SwNbPstateLoDis;
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnExit)->NbPstateDisOnP0 = ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnEntry)->NbPstateDisOnP0;
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnExit)->NbPstateThreshold = ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnEntry)->NbPstateThreshold;
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnExit)->NbPstateGnbSlowDis = ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOnEntry)->NbPstateGnbSlowDis;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrlOnExit, StdHeader);
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F16KbPmNbAfterResetOnCore to transition to the low NB P-state.
+ *
+ * This function implements steps 7, 8, 13, and 14 as needed.
+ *
+ * @param[in] PciAddress Segment, bus, device number of the node to transition.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+TransitionToNbLow (
+ IN PCI_ADDR PciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ NB_PSTATE_CTRL_REGISTER NbPsCtrl;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " TransitionToNbLow\n");
+
+ // 7/13. Write 0 to D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateThreshold].
+ PciAddress.AddressValue = NB_PSTATE_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+ NbPsCtrl.SwNbPstateLoDis = 0;
+ NbPsCtrl.NbPstateDisOnP0 = 0;
+ NbPsCtrl.NbPstateThreshold = 0;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+
+ // 8/14. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateLo] and D18F5x174[CurNbFid,
+ // CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateLo].
+ WaitForNbTransitionToComplete (PciAddress, NbPsCtrl.NbPstateLo, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F16KbPmNbAfterResetOnCore to transition to the high NB P-state.
+ *
+ * This function implements steps 9, 10, 11, and 12 as needed.
+ *
+ * @param[in] PciAddress Segment, bus, device number of the node to transition.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+TransitionToNbHigh (
+ IN PCI_ADDR PciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ NB_PSTATE_CTRL_REGISTER NbPsCtrl;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " TransitionToNbHigh\n");
+
+ // 9/10. Set D18F5x170[SwNbPstateLoDis] = 1.
+ PciAddress.AddressValue = NB_PSTATE_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+ NbPsCtrl.SwNbPstateLoDis = 1;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+
+ // 11/12. Wait for D18F5x174[CurNbPstate] = D18F5x170[NbPstateHi] and D18F5x174[CurNbFid,
+ // CurNbDid] = [NbFid, NbDid] from D18F5x1[6C:60] indexed by D18F5x170[NbPstateHi].
+ WaitForNbTransitionToComplete (PciAddress, NbPsCtrl.NbPstateHi, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Support routine for F16KbPmAfterResetCore to wait for NB FID and DID to
+ * match a specific P-state.
+ *
+ * This function implements steps 8, 10, 12, and 14 as needed.
+ *
+ * @param[in] PciAddress Segment, bus, device number of the node to transition.
+ * @param[in] PstateIndex P-state settings to match.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+WaitForNbTransitionToComplete (
+ IN PCI_ADDR PciAddress,
+ IN UINT32 PstateIndex,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ NB_PSTATE_REGISTER TargetNbPs;
+ NB_PSTATE_STS_REGISTER NbPsSts;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " WaitForNbTransitionToComplete\n");
+
+ PciAddress.Address.Function = FUNC_5;
+ PciAddress.Address.Register = NB_PSTATE_0 + (PstateIndex << 2);
+ LibAmdPciRead (AccessWidth32, PciAddress, &TargetNbPs, StdHeader);
+ PciAddress.Address.Register = NB_PSTATE_STATUS;
+ do {
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPsSts, StdHeader);
+ } while ((NbPsSts.CurNbPstate != PstateIndex ||
+ (NbPsSts.CurNbFid != TargetNbPs.NbFid)) ||
+ (NbPsSts.CurNbDid != TargetNbPs.NbDid));
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbNbAfterReset.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbNbAfterReset.h
new file mode 100644
index 0000000..0d2c7bc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbNbAfterReset.h
@@ -0,0 +1,78 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini after warm reset sequence for NB P-states
+ *
+ * Contains code that provide power management functionality
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F16_KB_NB_AFTER_RESET_H_
+#define _CPU_F16_KB_NB_AFTER_RESET_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F16KbPmNbAfterReset (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _CPU_F16_KB_NB_AFTER_RESET_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPciTables.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPciTables.c
new file mode 100644
index 0000000..4cd445e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPciTables.c
@@ -0,0 +1,1147 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 KB PCI tables with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/FAMILY/0x16/KB
+ * @e \$Revision: 86705 $ @e \$Date: 2013-01-24 17:34:21 -0600 (Thu, 24 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "F16KbPowerMgmt.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBPCITABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+SetDisCstateBoostBlockPstateUp (
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+ScalingApmParamBaseOnCSampleTimer (
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+SetTdpLimitDis (
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+// P C I T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F16KbPciRegistersAfterApLaunch[] =
+{
+// D18F0x6C - Link Initialization Control
+// bits[0] RouteTblDis = 0x0
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x6C), // Address
+ 0x00000000, // RegData
+ 0x00000001, // RegMask
+ }}
+ },
+// D18F0x84 - Link Control
+// bits[12] IsocEn = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x84), // Address
+ 0x00001000, // RegData
+ 0x00001000, // RegMask
+ }}
+ },
+// D18F0x90 - Link Base Channel Buffer Count
+// bits[30] PReq[3] = 0x0
+// bits[29:28] NpReqData[3:2] = 0x0
+// bits[27:25] FreeData = 0x0
+// bits[24:20] FreeCmd = 0x0
+// bits[19:18] RspData = 0x1
+// bits[17:16] NpReqData[1:0] = 0x1
+// bits[15:12] ProbeCmd = 0x0
+// bits[11:8] RspCmd = 0x1
+// bits[7:5] PReq[2:0] = 0x5
+// bits[4:0] NpReqCmd = 0x5
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x90), // Address
+ 0x000501A5, // RegData
+ 0x7FFFFFFF, // RegMask
+ }}
+ },
+// D18F0x94 - Link Isochronous Channel Buffer Count
+// bits[28:27] IsocRspData = 0x0
+// bits[26:25] IsocNpReqData = 0x1
+// bits[24:22] IsocRspCmd = 0x0
+// bits[21:19] IsocPReq = 0x0
+// bits[18:16] IsocNpReqCmd = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x94), // Address
+ 0x02010000, // RegData
+ 0x1FFF0000,
+ }}
+ },
+// D18F0x90 - Link Base Channel Buffer Count
+// bit [31] LockBc = 0x1
+//
+// NOTE: The entry is intended to be programmed after other bits of D18F0x[90, 94] is programmed.
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x90), // Address
+ 0x80000000, // regData
+ 0x80000000, // regMask
+ }}
+ },
+// D18F0x110 - Link Clumping Enable
+// bits [31:1] ClumpEn = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x110), // Address
+ 0x00000002, // regData
+ 0xFFFFFFFE, // regMask
+ }}
+ },
+// D18F0x168 - Extended Link Transaction Control
+// bits[20] = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x168), // Address
+ 0x00100000, // RegData
+ 0x00100000, // RegMask
+ }}
+ },
+
+// D18F2x118 - Memory Controller Configuration Low
+// bits[31:28] MctVarPriCntLmt = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_2, 0x118), // Address
+ 0x10000000, // RegData
+ 0xF0000000, // RegMask
+ }}
+ },
+// D18F3x44 - MCA NB Configuration
+// bits[30] SyncFloodOnDramAdrParErr = 0x1
+// bits[27] NbMcaToMstCpuEn = 0x1
+// bits[21] SyncFloodOnAnyUcErr = 0x1
+// bits[20] SyncFloodOnWDT = 0x1
+// bits[6] CpuErrDis = 0x1
+// bits[4] SyncPktPropDis = 0x0
+// bits[3] SyncPktGenDis = 0x0
+// bits[2] SyncFloodOnDramUcEcc = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x44), // Address
+ 0x48300044, // RegData
+ 0x4830005C, // RegMask
+ }}
+ },
+// D18F3x6C - Data Buffer Count
+// bits[30:28] IsocRspDBC = 0x1
+// bits[18:16] UpRspDBC = 0x1
+// bits[7:6] DnRspDBC = 0x1
+// bits[5:4] DnReqDBC = 0x1
+// bits[2:0] UpReqDBC = 0x2
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x6C), // Address
+ 0x10010052, // RegData
+ 0x700700F7, // RegMask
+ }}
+ },
+// D18F3x70 - SRI to XBAR Command Buffer Count
+// bits[30:28] IsocRspCBC = 0x1
+// bits[26:24] IsocPreqCBC = 0x0
+// bits[22:20] IsocReqCBC = 0x1
+// bits[18:16] UpRspCBC = 0x3
+// bits[14:12] DnPreqCBC = 0x1
+// bits[10:8] UpPreqCBC = 0x1
+// bits[7:6] DnRspCBC = 0x1
+// bits[5:4] DnReqCBC = 0x1
+// bits[2:0] UpReqCBC = 0x3
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x70), // Address
+ 0x10131153, // RegData
+ 0x777777F7, // RegMask
+ }}
+ },
+// D18F3x74 - XBAR to SRI Command Buffer Count
+// bits[31:28] DRReqCBC = 0x0
+// bits[26:24] IsocPreqCBC = 0x1
+// bits[23:20] IsocReqCBC = 0x1
+// bits[19:16] ProbeCBC = 0xC
+// bits[14:12] DnPreqCBC = 0x0
+// bits[10:8] UpPreqCBC = 0x1
+// bits[6:4] DnReqCBC = 0x0
+// bits[2:0] UpReqCBC = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x74), // Address
+ 0x011C0101, // RegData
+ 0xF7FF7777, // RegMask
+ }}
+ },
+// D18F3x78 - MCT to XBAR Buffer Count
+// bits[12:8] ProbeCBC = 0x8
+// bits[5:0] RspCBC = 0x10
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x78), // Address
+ 0x00000810, // RegData
+ 0x00001F3F, // RegMask
+ }}
+ },
+
+// D18F3x7C - Free List Buffer Count
+// bits[22:20] Sri2XbarFreeRspDBC = 0x0
+// bits[19:16] Sri2XbarFreeXreqDBC = 0x5
+// bits[15:12] Sri2XbarFreeRspCBC = 0x0
+// bits[11:8] Sri2XbarFreeXreqCBC = 0x6
+// bits[5:0] Xbar2SriFreeListCBC = 0x1B
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x7C), // Address
+ 0x0005061B, // RegData
+ 0x007FFF3F, // RegMask
+ }}
+ },
+// D18F3x84 - ACPI Power State Control High
+// bits[1] NbLowPwrEnSmafAct4 = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x84), // Address
+ 0x00000002, // RegData
+ 0x00000002, // RegMask
+ }}
+ },
+// D18F3xA0 - Power Control Miscellaneous
+// bits[13:11] PllLockTime = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA0), // Address
+ 0x00000800, // RegData
+ 0x00003800, // RegMask
+ }}
+ },
+// D18F3xA0 - Power Control Miscellaneous
+// bits[14] Svi2HighFreqSel = 0x1, if PERFORMANCE_VRM_HIGH_SPEED_ENABLE == TRUE
+ {
+ ProfileFixup,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // platformFeatures
+ {{
+ PERFORMANCE_VRM_HIGH_SPEED_ENABLE, // PerformanceFeatures
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA0), // Address
+ 0x00004000, // regData
+ 0x00004000, // regMask
+ }}
+ },
+// D18F3xA4 - Reported Temperature Control
+// bits[12:8] PerStepTimeDn = 0xF
+// bits[7] TmpSlewDnEn = 0x1
+// bits[6:5] TmpMaxDiffUp = 0x3
+// bits[4:0] PerStepTimeUp = 0xF
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA4), // Address
+ 0x00000FEF, // RegData
+ 0x00001FFF, // RegMask
+ }}
+ },
+// D18F3xD4 - Clock Power/Timing Control 0
+// bits[31] NbClkDivApplyAll = 0x1
+// bits[30:28] NbClkDiv = 0x1
+// bits[27:24] PowerStepUp = 0x8
+// bits[23:20] PowerStepDown = 0x8
+// bits[11:8] ClkRampHystSel = 0xF
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0xD4), // Address
+ 0x98800F00, // RegData
+ 0xFFF00F00, // RegMask
+ }}
+ },
+// D18F3xD8 - Clock Power/Timing Control 1
+// bits[6:4] VSRampSlamTime = 0x4
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0xD8), // Address
+ 0x00000040, // RegData
+ 0x00000070, // RegMask
+ }}
+ },
+// D18F3xDC - Clock Power/Timing Control 2
+// bits[29:27] NbsynPtrAdjLo = 0x5
+// bits[26] IgnCpuPrbEn = 0x0
+// bits[25:19] CacheFlushOnHaltTmr = 0xF
+// bits[18:16] CacheFlushOnHaltCtl = 0x0
+// bits[14:12] NbsynPtrAdj = 0x6
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0xDC), // Address
+ 0x28786000, // RegData
+ 0x3FFF7000, // RegMask
+ }}
+ },
+// D18F3x140 - SRI to XCS Token Count
+// bits[24:20] FreeTok = 0xF
+// bits[17:16] IsocRspTok = 0x1
+// bits[15:14] IsocPreqTok = 0x0
+// bits[13:12] IsocReqTok = 0x1
+// bits[11:10] DnRspTok = 0x1
+// bits[9:8] UpRspTok = 0x1
+// bits[7:6] DnPreqTok = 0x1
+// bits[5:4] UpPreqTok = 0x2
+// bits[3:2] DnReqTok = 0x1
+// bits[1:0] UpReqTok = 0x2
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x140), // Address
+ 0x00F11566, // RegData
+ 0x01F3FFFF, // RegMask
+ }}
+ },
+// D18F3x144 - MCT to XCS Token Count
+// bits[7:4] ProbeTok = 0x4
+// bits[3:0] RspTok = 0x7
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x144), // Address
+ 0x00000047, // RegData
+ 0x000000FF, // RegMask
+ }}
+ },
+// D18F3x148 - Link to XCS Token Count - Link 0
+// bits[31:30] FreeTok[3:2] = 0x0
+// bits[28] IsocRspTok1 = 0x0
+// bits[26] IsocPreqTok1 = 0x0
+// bits[24] IsocReqTok1 = 0x0
+// bits[23:22] ProbeTok1 = 0x0
+// bits[21:20] RspTok1 = 0x0
+// bits[19:18] PReqTok1 = 0x0
+// bits[17:16] ReqTok1 = 0x0
+// bits[15:14] FreeTok[1:0] = 0x0
+// bits[13:12] IsocRspTok0 = 0x0
+// bits[11:10] IsocPreqTok0 = 0x1
+// bits[9:8] IsocReqTok0 = 0x1
+// bits[7:6] ProbeTok0 = 0x0
+// bits[5:4] RspTok0 = 0x2
+// bits[3:2] PReqTok0 = 0x2
+// bits[1:0] ReqTok0 = 0x2
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x148), // Address
+ 0x0000052A, // RegData
+ 0xD5FFFFFF, // RegMask
+ }}
+ },
+// D18F3x160 - NB Machine Check Misc (DRAM Thresholding) 0 (MC4_MISC0)
+// bits[23:20] LvtOffset = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x160), // Address
+ 0x00100000, // RegData
+ 0x00F00000, // RegMask
+ }}
+ },
+// D18F3x168 - NB Machine Check Misc (Link Thresholding) 1 (MC4_MISC1)
+// bits[23:20] LvtOffset = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x168), // Address
+ 0x00100000, // RegData
+ 0x00F00000, // RegMask
+ }}
+ },
+// D18F3x17C - Extended Freelist Buffer Count
+// bits[3:0] SPQPrbFreeCBC = 0x8
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x17C), // Address
+ 0x00000008, // RegData
+ 0x0000000F, // RegMask
+ }}
+ },
+// D18F3x180 - Extended NB MCA Configuration
+// bits[28] SyncFloodOnCC6DramUcErr = 0x1
+// bits[24] McaLogErrAddrWdtErr = 0x1
+// bits[21] SyncFloodOnCpuLeakErr = 0x1
+// bits[17] SyncFloodOnDeferErrToIO = 0x1
+// bits[9] SyncFloodOnUCNbAry = 0x1
+// bits[8] SyncFloodOnProtErr = 0x1
+// bits[7] SyncFloodOnTgtAbortErr = 0x1
+// bits[6] SyncFloodOnDatErr = 0x1
+// bits[5] DisPciCfgCpuMstAbortRsp = 0x1
+// bits[1] SyncFloodOnUsPwDatErr = 0x1
+// bits[0] McaLogUsPwDatErrEn = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x180), // Address
+ 0x112203E3, // RegData
+ 0x112203E3, // RegMask
+ }}
+ },
+// bits[9] = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x188), // Address
+ 0x00000200, // RegData
+ 0x00000200, // RegMask
+ }}
+ },
+// D18F3x1A0 - Core Interface Buffer Count
+// bits[18:16] CpuToNbFreeBufCnt = 0x3
+// bits[2:0] CpuCmdBufCnt = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1A0), // Address
+ 0x00030001, // RegData
+ 0x00070007, // RegMask
+ }}
+ },
+// D18F3x1CC - IBS Control
+// bits[8] LvtOffsetVal = 0x1
+// bits[3:0] LvtOffset = 0x0
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1CC), // Address
+ 0x00000100, // RegData
+ 0x0000010F, // RegMask
+ }}
+ },
+// D18F3x1E4 - SBI Control
+// bits[11:8] LvtOffset = 0x3
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1E4), // Address
+ 0x00000300, // RegData
+ 0x00000F00, // RegMask
+ }}
+ },
+// D18F0x6C - Link Initialization Control
+// bit [30] RlsLnkFullTokCntImm = 0x1
+// bit [28] RlsIntFullTokCntImm = 0x1
+//
+// NOTE: The entry is intended to be after D18F0x[90, 94] and D18F3x[6C, 70, 74, 78, 7C, 140, 144, 148, 14C, 17C, 1A0] are programmed.
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x6C), // Address
+ 0x50000000, // RegData
+ 0x50000000, // RegMask
+ }}
+ },
+// D18F0x6C - Link Initialization Control
+// bits[27] ApplyIsocModeEnNow = 0x1
+//
+// NOTE: The entry is intended to be after RlsLnkFullTokCntImm and RlsIntFullTokCntImm have been set.
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x6C), // Address
+ 0x08000000, // RegData
+ 0x08000000, // RegMask
+ }}
+ },
+// D18F3x200 - Performance Mode Control Register
+// bits[3] EnMcqPrbPickThrottle = 0x1
+// bits[2] EnDctOddToNcLnkDatXfr = 0x1
+// bits[1] EnDctEvnToNcLnkDatXfr = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x200), // Address
+ 0x0000000E, // RegData
+ 0x0000000E, // RegMask
+ }}
+ },
+// D18F4x118 - C-state Control 1
+// bits[23:21] ClkDivisorCstAct1 = 0x0
+// bits[19:18] CacheFlushTmrSelCstAct1 = 0x2
+// bits[16] CpuPrbEnCstAct1 = 0x1
+// bits[7:5] ClkDivisorCstAct0 = 0x0
+// bits[3:2] CacheFlushTmrSelCstAct0 = 0x2
+// bits[0] CpuPrbEnCstAct0 = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_4, 0x118), // Address
+ 0x00090009, // RegData
+ 0x00ED00ED, // RegMask
+ }}
+ },
+// D18F4x128 - C-state Policy Control 1
+// bits[24:23] CacheFlushSucMonMispredictAct = 0x1
+// bits[22:21] CacheFlushSucMonTmrSel = 0x1
+// bits[20:18] CacheFlushSucMonThreshold = 0x4
+// bits[11:5] CacheFlushTmr = 0x7F
+// bits[4:2] HaltCstateIndex = 0x0
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_4, 0x128), // Address
+ 0x00B00FE0, // RegData
+ 0x01FC0FFC, // RegMask
+ }}
+ },
+// D18F4x15C - Core Performance Boost Control
+// bits[8] CstatePowerEn = 0x1
+// bits[1:0] BoostSrc = 0x0
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_4, 0x15C), // Address
+ 0x00000100, // RegData
+ 0x00000103, // RegMask
+ }}
+ },
+// D18F4x16C - APM TDP Control
+// bits[14] CacUpC1 = 0x0
+// bits[4] ApmTdpLimitIntEn = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_4, 0x16C), // Address
+ 0x00000010, // RegData
+ 0x00004010, // RegMask
+ }}
+ },
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_4, 0x210), // Address
+ 0x0000B41F, // RegData
+ 0x0000F7FF, // RegMask
+ }}
+ },
+// D18F5x88 - NB Configuration 4 (NB_CFG4)
+// bits[24] DisHbNpReqBusLock = 0x1
+// bits[0] CC6PstateWakeUpDis = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_5, 0x88), // Address
+ 0x01000001, // RegData
+ 0x01000001, // RegMask
+ }}
+ },
+// D18F5x8C
+// bits[15] = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_5, 0x8C), // Address
+ 0x00008000, // RegData
+ 0x00008000, // RegMask
+ }}
+ },
+// D18F5xE0 - Processor TDP Running Average
+// bits[3:0] RunAvgRange = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_5, 0xE0), // Address
+ 0x00000001, // RegData
+ 0x0000000F, // RegMask
+ }}
+ },
+// D18F5x128 - Clock Power/Timing Control 3
+// bits[13:12] PwrGateTmr = 0x0
+// bits[9] FastSlamTimeDown = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_5, 0x128), // Address
+ 0x00000200, // RegData
+ 0x00003200, // RegMask
+ }}
+ },
+// D18F5x12C - Clock Power/Timing Control 4
+// bits[5] CorePsi1En = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_5, 0x12C), // Address
+ 0x00000020, // RegData
+ 0x00000020, // RegMask
+ }}
+ },
+// D18F5x170 - Northbridge P-state Control
+// bits[12:9] NbPstateThreshold = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_5, 0x170), // Address
+ 0x00000200, // RegData
+ 0x00001E00, // RegMask
+ }}
+ },
+// D18F5x178 - Northbridge Fusion Configuration
+// bits[18] CstateFusionHsDis = 0x1
+// bits[17] = 0x1
+// bits[16] ProcHotToGnbEn = 0x1
+// bits[11] = 0x1
+// bits[10] = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_5, 0x178), // Address
+ 0x00070C00, // RegData
+ 0x00070C00, // RegMask
+ }}
+ },
+};
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F16KbPciRegistersBeforeApLaunch[] =
+{
+// D18F0x68 - Link Transaction Control
+// bits[22:21] DsNpReqLmt = 0x2
+// bits[19] ApicExtSpur = 0x1
+// bits[18] ApicExtId = 0x1
+// bits[17] ApicExtBrdCst = 0x1
+// bits[15] LimitCldtCfg = 0x1
+// bits[11] RespPassPW = 0x1
+// bits[10] DisFillP = 0x0
+// bits[4] DisMTS = 0x1
+// bits[3] DisWrDwP = 0x1
+// bits[2] DisWrBP = 0x1
+// bits[1] DisRdDwP = 0x1
+// bits[0] DisRdBP = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68), // Address
+ 0x004E881F, // RegData
+ 0x006E8C1F, // RegMask
+ }}
+ },
+// D18F3x8C - NB Configuration 1 High (NB_CFG1_HI)
+// bits[30] MSRC001_001F[DisStpClkAbortFlush] = 0x1
+// bits[23] MSRC001_001F[EnaDiv1CpuLowPwr] = 0x1
+// bits[22] MSRC001_001F[InitApicIdCpuIdLo] = 0x1
+// bits[19] MSRC001_001F[DisDatFwdVic] = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x8C), // Address
+ 0x40C80000, // RegData
+ 0x40C80000, // RegMask
+ }}
+ },
+};
+
+// PCI with Special Programming Requirements Table
+// ----------------------
+
+STATIC CONST FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_INITIALIZER ROMDATA F16KbPciWorkarounds[] =
+{
+// D18F3x88
+ {
+ FamSpecificWorkaround,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // platformFeatures
+ {{
+ SetDisCstateBoostBlockPstateUp, // function call
+ 0x00000000, // data
+ }}
+ },
+// D18F4x110
+ {
+ FamSpecificWorkaround,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // platformFeatures
+ {{
+ ScalingApmParamBaseOnCSampleTimer, // function call
+ 0x00000000, // data
+ }}
+ },
+// D18F4x16C
+ {
+ FamSpecificWorkaround,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_KB_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // platformFeatures
+ {{
+ SetTdpLimitDis, // function call
+ 0x00000000, // data
+ }}
+ },
+};
+
+CONST REGISTER_TABLE ROMDATA F16KbPciRegisterTableAfterApLaunch = {
+ PrimaryCores,
+ PERFORM_TP_AFTER_AP_LAUNCH,
+ (sizeof (F16KbPciRegistersAfterApLaunch) / sizeof (TABLE_ENTRY_FIELDS)),
+ (TABLE_ENTRY_FIELDS *) F16KbPciRegistersAfterApLaunch,
+};
+
+CONST REGISTER_TABLE ROMDATA F16KbPciRegisterTableBeforeApLaunch = {
+ PrimaryCores,
+ PERFORM_TP_BEFORE_AP_LAUNCH,
+ (sizeof (F16KbPciRegistersBeforeApLaunch) / sizeof (TABLE_ENTRY_FIELDS)),
+ (TABLE_ENTRY_FIELDS *) F16KbPciRegistersBeforeApLaunch,
+};
+
+CONST REGISTER_TABLE ROMDATA F16KbPciWorkaroundTable = {
+ PrimaryCores,
+ PERFORM_TP_AFTER_AP_LAUNCH,
+ (sizeof (F16KbPciWorkarounds) / sizeof (TABLE_ENTRY_FIELDS)),
+ (TABLE_ENTRY_FIELDS *) F16KbPciWorkarounds,
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Workaround for Kabini processors.
+ *
+ *
+ * @param[in] Data The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetDisCstateBoostBlockPstateUp (
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+ NB_CFG1_LOW_REG_REGISTER NbCfg1Low;
+ NB_CFG_4_REGISTER NbCfg4;
+
+ PciAddress.AddressValue = NB_CFG_REG4_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, (VOID *)&NbCfg4, StdHeader);
+
+ PciAddress.AddressValue = NB_CFG1_LOW_REG_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, (VOID *)&NbCfg1Low, StdHeader);
+
+ NbCfg1Low.DisCstateBoostBlockPstateUp = NbCfg4.EnCstateBoostBlockCC6Exit;
+ LibAmdPciWrite (AccessWidth32, PciAddress, (VOID *)&NbCfg1Low, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Workaround for Kabini processors.
+ *
+ * AGESA should program F4x110[11:0][CSampleTimer] to 2, and update below registers as:
+ * The following should be ROUNDED-NEAREST:
+ *
+ * @param[in] Data The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+ScalingApmParamBaseOnCSampleTimer (
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+ pmgmt_str0 var0;
+ pmgmt_str1 var1;
+ SAMPLE_RESIDENCY_TIMER_REGISTER SampleResidencyTimer;
+
+ PciAddress.AddressValue = SAMPLE_RESIDENCY_TIMER_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, (VOID *)&SampleResidencyTimer, StdHeader);
+
+ SampleResidencyTimer.CSampleTimer = 20;
+ IDS_OPTION_HOOK (IDS_CSAMPLE_TIMER, (VOID *) (&SampleResidencyTimer), StdHeader);
+ ASSERT (SampleResidencyTimer.CSampleTimer != 0);
+ LibAmdPciWrite (AccessWidth32, PciAddress, (VOID *)&SampleResidencyTimer, StdHeader);
+
+ // The following should be ROUNDED-NEAREST:
+ // F5xB8[19:0] = F5xB8[19:0] * 2 / F4x110[CSampleTimer]
+ // F5xBC[19:0] = F5xBC[19:0] * 2 / F4x110[CSampleTimer]
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, FUNC_5, 0xB8);
+ LibAmdPciRead (AccessWidth32, PciAddress, (VOID *)&var0, StdHeader);
+ var0.Bits_19_0 = ((var0.Bits_19_0 * 2) + (SampleResidencyTimer.CSampleTimer / 2)) / SampleResidencyTimer.CSampleTimer;
+ LibAmdPciWrite (AccessWidth32, PciAddress, (VOID *)&var0, StdHeader);
+
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, FUNC_5, 0xBC);
+ LibAmdPciRead (AccessWidth32, PciAddress, (VOID *)&var1, StdHeader);
+ var1.Bits_19_0 = ((var1.Bits_19_0 * 2) + (SampleResidencyTimer.CSampleTimer / 2)) / SampleResidencyTimer.CSampleTimer;
+ LibAmdPciWrite (AccessWidth32, PciAddress, (VOID *)&var1, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Workaround for Kabini processors.
+ *
+ * AGESA should program F4x16C[TdpLimitDis] in some case
+ *
+ * @param[in] Data The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetTdpLimitDis (
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 PciData;
+ PCI_ADDR PciAddress;
+
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, FUNC_0, 0xB8);
+ PciData = 0xC010408C;
+ LibAmdPciWrite (AccessWidth32, PciAddress, (VOID *)&PciData, StdHeader);
+ PciAddress.Address.Register = 0xBC;
+ LibAmdPciRead (AccessWidth32, PciAddress, (VOID *)&PciData, StdHeader);
+
+ if ((PciData & BIT2) == BIT2) {
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, FUNC_4, 0x16C);
+ LibAmdPciRead (AccessWidth32, PciAddress, (VOID *)&PciData, StdHeader);
+ PciData |= BIT3;
+ LibAmdPciWrite (AccessWidth32, PciAddress, (VOID *)&PciData, StdHeader);
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPowerCheck.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPowerCheck.c
new file mode 100644
index 0000000..2017f8b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPowerCheck.c
@@ -0,0 +1,500 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 P-State power check
+ *
+ * Performs the "Processor-Systemboard Power Delivery Compatibility Check" as
+ * described in the BKDG.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 86879 $ @e \$Date: 2013-01-28 11:11:12 -0600 (Mon, 28 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuF16PowerMgmt.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "F16KbPowerCheck.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFeatures.h"
+#include "cpuApicUtilities.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBPOWERCHECK_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F16KbPmPwrCheckErrorHandler (
+ IN VOID *ErrorData,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+F16KbPmPwrChkCopyPstate (
+ IN UINT8 Dest,
+ IN UINT8 Src,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+F16KbTransitionPstateCore (
+ IN VOID *StateNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family 16h Kabini core 0 entry point for performing the family 16h Processor-
+ * Systemboard Power Delivery Check.
+ *
+ * The steps are as follows:
+ * 1. Starting with P0, loop through all P-states until a passing state is
+ * found. A passing state is one in which the current required by the
+ * CPU is less than the maximum amount of current that the system can
+ * provide to the CPU. If P0 is under the limit, no further action is
+ * necessary.
+ * 2. If at least one P-State is under the limit & at least one P-State is
+ * over the limit, the BIOS must:
+ * a. If the processor's current P-State is disabled by the power check,
+ * then the BIOS must request a transition to an enabled P-state
+ * using MSRC001_0062[PstateCmd] and wait for MSRC001_0063[CurPstate]
+ * to reflect the new value.
+ * b. Copy the contents of the enabled P-state MSRs to the highest
+ * performance P-state locations.
+ * c. Request a P-state transition to the P-state MSR containing the
+ * COF/VID values currently applied.
+ * d. If a subset of boosted P-states are disabled, then copy the contents
+ * of the highest performance boosted P-state still enabled to the
+ * boosted P-states that have been disabled.
+ * e. If all boosted P-states are disabled, then program D18F4x15C[BoostSrc]
+ * to zero.
+ * f. Adjust the following P-state parameters affected by the P-state
+ * MSR copy by subtracting the number of P-states that are disabled
+ * by the power check.
+ * 1. F3x64[HtcPstateLimit]
+ * 2. F3x68[SwPstateLimit]
+ * 3. F3xDC[PstateMaxVal]
+ * 3. If all P-States are over the limit, the BIOS must:
+ * a. If the processor's current P-State is !=F3xDC[PstateMaxVal], then
+ * write F3xDC[PstateMaxVal] to MSRC001_0062[PstateCmd] and wait for
+ * MSRC001_0063[CurPstate] to reflect the new value.
+ * b. If MSRC001_0061[PstateMaxVal]!=000b, copy the contents of the P-state
+ * MSR pointed to by F3xDC[PstateMaxVal] to the software P0 MSR.
+ * Write 000b to MSRC001_0062[PstateCmd] and wait for MSRC001_0063
+ * [CurPstate] to reflect the new value.
+ * c. Adjust the following P-state parameters to zero:
+ * 1. F3x64[HtcPstateLimit]
+ * 2. F3x68[SwPstateLimit]
+ * 3. F3xDC[PstateMaxVal]
+ * d. Program D18F4x15C[BoostSrc] to zero.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] CpuEarlyParams Service parameters
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+F16KbPmPwrCheck (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 DisPsNum;
+ UINT8 PsMaxVal;
+ UINT8 Pstate;
+ UINT32 ProcIddMax;
+ UINT32 LocalPciRegister;
+ UINT32 PstateLimit;
+ UINT32 SwPstateAdjust;
+ PCI_ADDR PciAddress;
+ UINT64 LocalMsrRegister;
+ PWRCHK_ERROR_DATA ErrorData;
+
+ ErrorData.SocketNumber = 0;
+ // get the Max P-state value
+ for (PsMaxVal = NM_PS_REG - 1; PsMaxVal != 0; --PsMaxVal) {
+ LibAmdMsrRead (PS_REG_BASE + PsMaxVal, &LocalMsrRegister, StdHeader);
+ if (((F16_PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1) {
+ break;
+ }
+ }
+
+ ErrorData.HwPstateNumber = (UINT8) (PsMaxVal + 1);
+
+ // Starting with P0, loop through all P-states until a passing state is
+ // found. A passing state is one in which the current required by the
+ // CPU is less than the maximum amount of current that the system can
+ // provide to the CPU. If P0 is under the limit, no further action is
+ // necessary.
+ DisPsNum = 0;
+ for (Pstate = 0; Pstate < ErrorData.HwPstateNumber; Pstate++) {
+ if (FamilySpecificServices->GetProcIddMax (FamilySpecificServices, Pstate, &ProcIddMax, StdHeader)) {
+ if (ProcIddMax > CpuEarlyParams->PlatformConfig.VrmProperties[CoreVrm].MaximumCurrentLimit) {
+ // Add to event log the Pstate that exceeded the current limit
+ PutEventLog (AGESA_WARNING,
+ CPU_EVENT_PM_PSTATE_OVERCURRENT,
+ 0, Pstate, 0, 0, StdHeader);
+ DisPsNum++;
+ } else {
+ break;
+ }
+ }
+ }
+
+ ErrorData.AllowablePstateNumber = ((PsMaxVal + 1) - DisPsNum);
+
+ if (ErrorData.AllowablePstateNumber == 0) {
+ PutEventLog (AGESA_FATAL,
+ CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT,
+ 0, 0, 0, 0, StdHeader);
+ }
+
+ if (DisPsNum != 0) {
+ PciAddress.AddressValue = CPB_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F4x15C
+ ErrorData.NumberOfBoostStates = (UINT8) ((F16_CPB_CTRL_REGISTER *) &LocalPciRegister)->NumBoostStates;
+
+ if (DisPsNum >= ErrorData.NumberOfBoostStates) {
+ // If all boosted P-states are disabled, then program D18F4x15C[BoostSrc] to zero.
+ LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+ ((F16_CPB_CTRL_REGISTER *) (&LocalPciRegister))->BoostSrc = 0;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+ // Update the result of isFeatureEnabled in heap.
+ UpdateFeatureStatusInHeap (CoreBoost, FALSE, StdHeader);
+
+ ErrorData.NumberOfSwPstatesDisabled = DisPsNum - ErrorData.NumberOfBoostStates;
+ } else {
+ ErrorData.NumberOfSwPstatesDisabled = 0;
+ }
+
+ PciAddress.AddressValue = HTC_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3x64
+ ErrorData.HtcPstate = (UINT8) (((HTC_REGISTER *) (&LocalPciRegister))->HtcPstateLimit);
+
+ F16KbPmPwrCheckErrorHandler (&ErrorData, StdHeader);
+
+ // Final Step
+ // F3x64[HtcPstatelimit] -= disPsNum
+ // F3x68[SwPstateLimit] -= disPsNum
+ // F3xDC[HwPstateMaxVal] -= disPsNum
+ if (ErrorData.NumberOfSwPstatesDisabled != 0) {
+ PstateLimit = ((HTC_REGISTER *) &LocalPciRegister)->HtcPstateLimit;
+ if (PstateLimit > PsMaxVal) {
+ SwPstateAdjust = PstateLimit - PsMaxVal;
+ } else {
+ SwPstateAdjust = 0;
+ }
+ if (PstateLimit > ErrorData.NumberOfSwPstatesDisabled) {
+ PstateLimit -= ErrorData.NumberOfSwPstatesDisabled;
+ } else {
+ PstateLimit = ErrorData.NumberOfBoostStates;
+ }
+ if (PstateLimit <= ErrorData.NumberOfBoostStates) {
+ PstateLimit = ErrorData.NumberOfBoostStates + SwPstateAdjust;
+ }
+ ((HTC_REGISTER *) (&LocalPciRegister))->HtcPstateLimit = PstateLimit;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+ PciAddress.Address.Register = SW_PS_LIMIT_REG;
+ LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3x68
+ PstateLimit = ((SW_PS_LIMIT_REGISTER *) &LocalPciRegister)->SwPstateLimit;
+ if (PstateLimit > PsMaxVal) {
+ SwPstateAdjust = PstateLimit - PsMaxVal;
+ } else {
+ SwPstateAdjust = 0;
+ }
+ if (PstateLimit > ErrorData.NumberOfSwPstatesDisabled) {
+ PstateLimit -= ErrorData.NumberOfSwPstatesDisabled;
+ } else {
+ PstateLimit = ErrorData.NumberOfBoostStates;
+ }
+ if (PstateLimit <= ErrorData.NumberOfBoostStates) {
+ PstateLimit = ErrorData.NumberOfBoostStates + SwPstateAdjust;
+ }
+ ((SW_PS_LIMIT_REGISTER *) (&LocalPciRegister))->SwPstateLimit = PstateLimit;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+ PciAddress.Address.Register = CPTC2_REG;
+ LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F3xDC
+ PstateLimit = ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->HwPstateMaxVal;
+ if (PstateLimit > ErrorData.NumberOfSwPstatesDisabled) {
+ PstateLimit -= ErrorData.NumberOfSwPstatesDisabled;
+ } else {
+ PstateLimit = ErrorData.NumberOfBoostStates;
+ }
+ if (PstateLimit < ErrorData.NumberOfBoostStates) {
+ PstateLimit = ErrorData.NumberOfBoostStates;
+ }
+
+ ((CLK_PWR_TIMING_CTRL2_REGISTER *) (&LocalPciRegister))->HwPstateMaxVal = PstateLimit;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+ }
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Error handler called if any p-states were determined to be out
+ * of range for the mother board.
+ *
+ * This function implements steps 2a-c and 3a-c on each core.
+ *
+ * @param[in] ErrorData Details about the error condition.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F16KbPmPwrCheckErrorHandler (
+ IN VOID *ErrorData,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+ UINT8 HwPsMaxVal;
+ UINT8 SwPsMaxVal;
+ UINT8 HwDisPsNum;
+ UINT8 CurrentSwPs;
+ UINT8 ShiftIndex;
+ UINT8 PsDisableCount;
+ UINT8 NewSwP0;
+ UINT8 StateNumber;
+ UINT8 Core;
+ UINT32 ActiveCores;
+ UINT64 LocalMsrRegister;
+ BOOLEAN DisableAllBoostPstates;
+ AP_TASK ApTask;
+ AGESA_STATUS IgnoreStatus;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ if (IsBsp (StdHeader, &IgnoreStatus)) {
+ // P-state MSRs are shared, so only BSC needs to perform this
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ GetActiveCoresInCurrentSocket (&ActiveCores, StdHeader);
+
+ HwPsMaxVal = (((PWRCHK_ERROR_DATA *) ErrorData)->HwPstateNumber - 1);
+ HwDisPsNum = (((PWRCHK_ERROR_DATA *) ErrorData)->HwPstateNumber -
+ ((PWRCHK_ERROR_DATA *) ErrorData)->AllowablePstateNumber);
+
+ LibAmdMsrRead (MSR_PSTATE_STS, &LocalMsrRegister, StdHeader);
+ CurrentSwPs = (UINT8) (((PSTATE_STS_MSR *) &LocalMsrRegister)->CurPstate);
+ LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &LocalMsrRegister, StdHeader);
+ SwPsMaxVal = (UINT8) (((PSTATE_CURLIM_MSR *) &LocalMsrRegister)->PstateMaxVal);
+ PsDisableCount = 0;
+ if (((PWRCHK_ERROR_DATA *) ErrorData)->HtcPstate > HwPsMaxVal) {
+ ShiftIndex = ((PWRCHK_ERROR_DATA *) ErrorData)->HtcPstate;
+ } else {
+ ShiftIndex = HwPsMaxVal;
+ }
+
+ DisableAllBoostPstates = FALSE;
+
+ // Prepare ApTask
+ ApTask.FuncAddress.PfApTaskI = F16KbTransitionPstateCore;
+ ApTask.DataTransfer.DataSizeInDwords = 1;
+ ApTask.DataTransfer.DataPtr = &StateNumber;
+ ApTask.DataTransfer.DataTransferFlags = 0;
+ ApTask.ExeFlags = 0;
+ if (((PWRCHK_ERROR_DATA *) ErrorData)->AllowablePstateNumber == 0) {
+ // All P-States are over the limit.
+
+ // Step 1
+ // Transition to Pstate Max if not there already
+ if (CurrentSwPs != SwPsMaxVal) {
+ StateNumber = SwPsMaxVal;
+ for (Core = 1; Core < (UINT8) ActiveCores; ++Core) {
+ ApUtilRunCodeOnSocketCore (0, Core, &ApTask, StdHeader);
+ }
+ ApUtilTaskOnExecutingCore (&ApTask, StdHeader, (VOID *) NULL);
+ }
+
+ // Step 2
+ // If Pstate Max is not P0, copy Pstate max contents to P0 and switch
+ // to P0.
+ for (i = 0; i <= (ShiftIndex - HwPsMaxVal); i++) {
+ F16KbPmPwrChkCopyPstate ((((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfBoostStates + i), (HwPsMaxVal + i), StdHeader);
+ }
+ StateNumber = 0;
+ for (Core = 1; Core < (UINT8) ActiveCores; ++Core) {
+ ApUtilRunCodeOnSocketCore (0, Core, &ApTask, StdHeader);
+ }
+ ApUtilTaskOnExecutingCore (&ApTask, StdHeader, (VOID *) NULL);
+
+
+ // Disable all SW P-states except P0
+ PsDisableCount = ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled - 1;
+
+ // Set a flag to disable all boost P-states
+ DisableAllBoostPstates = TRUE;
+ } else {
+ // At least one P-State is under the limit & at least one P-State is
+ // over the limit.
+ if (((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfBoostStates > HwDisPsNum) {
+ // A subset of boosted P-states are disabled. Copy the contents of the
+ // highest performance boosted P-state still enabled to the boosted
+ // P-states that have been disabled.
+ for (i = 0; i < HwDisPsNum; i++) {
+ F16KbPmPwrChkCopyPstate (i, HwDisPsNum, StdHeader);
+ }
+ } else {
+ // Set a flag to disable all boost P-states
+ DisableAllBoostPstates = TRUE;
+
+ if (((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled != 0) {
+ // Move remaining P-state register(s) up
+ // Step 1
+ // Transition to a valid Pstate if current Pstate has been disabled
+ if (CurrentSwPs < ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled) {
+ StateNumber = ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled;
+ for (Core = 1; Core < (UINT8) ActiveCores; ++Core) {
+ ApUtilRunCodeOnSocketCore (0, Core, &ApTask, StdHeader);
+ }
+ ApUtilTaskOnExecutingCore (&ApTask, StdHeader, (VOID *) NULL);
+
+ CurrentSwPs = ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled;
+ }
+
+ // Step 2
+ // Move enabled Pstates up and disable the remainder
+ NewSwP0 = ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfBoostStates + ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled;
+ for (i = 0; i <= (ShiftIndex - NewSwP0); i++) {
+ F16KbPmPwrChkCopyPstate ((i + ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfBoostStates), (i + NewSwP0), StdHeader);
+ }
+
+ // Step 3
+ // Transition to current COF/VID at shifted location
+ CurrentSwPs = (CurrentSwPs - ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled);
+ StateNumber = CurrentSwPs;
+ for (Core = 1; Core < (UINT8) ActiveCores; ++Core) {
+ ApUtilRunCodeOnSocketCore (0, Core, &ApTask, StdHeader);
+ }
+ ApUtilTaskOnExecutingCore (&ApTask, StdHeader, (VOID *) NULL);
+
+ // Disable the appropriate number of P-states
+ PsDisableCount = ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfSwPstatesDisabled;
+ }
+ }
+ }
+ // Disable all boost P-states
+ if (DisableAllBoostPstates) {
+ for (i = 0; i < ((PWRCHK_ERROR_DATA *) ErrorData)->NumberOfBoostStates; i++) {
+ FamilySpecificServices->DisablePstate (FamilySpecificServices, i, StdHeader);
+ }
+ }
+ // Disable the appropriate P-states if any, starting from HW Pmin
+ for (i = 0; i < PsDisableCount; i++) {
+ FamilySpecificServices->DisablePstate (FamilySpecificServices, (HwPsMaxVal - i), StdHeader);
+ }
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Copies the contents of one P-State MSR to another.
+ *
+ * @param[in] Dest Destination p-state number
+ * @param[in] Src Source p-state number
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+VOID
+STATIC
+F16KbPmPwrChkCopyPstate (
+ IN UINT8 Dest,
+ IN UINT8 Src,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 LocalMsrRegister;
+
+ LibAmdMsrRead ((UINT32) (PS_REG_BASE + Src), &LocalMsrRegister, StdHeader);
+ LibAmdMsrWrite ((UINT32) (PS_REG_BASE + Dest), &LocalMsrRegister, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Core-level transition Pstate
+ *
+ * Transitions the executing core to the desired P-state.
+ *
+ * @param[in] StateNumber The new P-State to make effective.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F16KbTransitionPstateCore (
+ IN VOID *StateNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+ FamilySpecificServices->TransitionPstate (FamilySpecificServices, *((UINT8 *) StateNumber), (BOOLEAN) TRUE, StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPowerCheck.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPowerCheck.h
new file mode 100644
index 0000000..078a539
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPowerCheck.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini Power related functions and structures
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _F16_KB_POWER_CHECK_H_
+#define _F16_KB_POWER_CHECK_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+/// Power Check Error Data
+typedef struct {
+ UINT8 SocketNumber; ///< Socket Number
+ UINT8 HwPstateNumber; ///< Number of hardware P-states
+ UINT8 AllowablePstateNumber; ///< Number of allowable P-states
+ UINT8 NumberOfBoostStates; ///< Number of boosted P-states
+ UINT8 NumberOfSwPstatesDisabled; ///< Number of software P-states disabled
+ UINT8 HtcPstate; ///< HTC Pstate Limit Pstate
+} PWRCHK_ERROR_DATA;
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+F16KbPmPwrCheck (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _F16_KB_POWER_CHECK_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPowerMgmt.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPowerMgmt.h
new file mode 100644
index 0000000..497b4d4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPowerMgmt.h
@@ -0,0 +1,535 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini Power Management related registers defination
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F16_KB_POWERMGMT_H_
+#define _CPU_F16_KB_POWERMGMT_H_
+
+/*
+ * Family 16h Kabini CPU Power Management MSR definitions
+ *
+ */
+
+
+/* NB Machine Check Misc 4 MSR Register 0x00000413 */
+#define MC4_MISC0 0x00000413ul
+
+/// Interrupt Pending and CMP-Halt MSR Register
+typedef struct {
+ UINT64 :24; ///< Reserved
+ UINT64 BlkPtr:8; ///< Block pointer for additional MISC registers
+ UINT64 ErrCnt:12; ///< Error counter
+ UINT64 :4; ///< Reserved
+ UINT64 Ovrflw:1; ///< Overflow
+ UINT64 IntType:2; ///< Interrupt type
+ UINT64 CntEn:1; ///< Counter enable
+ UINT64 LvtOffset:4; ///< LVT offset
+ UINT64 :5; ///< Reserved
+ UINT64 Locked:1; ///< Locked
+ UINT64 CntP:1; ///< Counter present
+ UINT64 Valid:1; ///< Valid
+} MC4_MISC0_MSR;
+
+/* P-state Registers 0xC00100[6B:64] */
+
+/// P-state MSR
+typedef struct {
+ UINT64 CpuFid:6; ///< CpuFid
+ UINT64 CpuDid:3; ///< CpuDid
+ UINT64 CpuVid:8; ///< CpuVid
+ UINT64 :5; ///< Reserved
+ UINT64 NbPstate:1; ///< NbPstate
+ UINT64 :9; ///< Reserved
+ UINT64 IddValue:8; ///< IddValue
+ UINT64 IddDiv:2; ///< IddDiv
+ UINT64 :21; ///< Reserved
+ UINT64 PsEnable:1; ///< Pstate Enable
+} PSTATE_MSR;
+
+#define GetF16KbCpuVid(PstateMsr) (((PSTATE_MSR *) PstateMsr)->CpuVid)
+
+
+/* VID operation related macros */
+#define ConvertVidInuV(Vid) (1550000 - (6250 * Vid)) ///< Convert VID in uV.
+
+/* COFVID Control Register 0xC0010070 */
+#define MSR_COFVID_CTL 0xC0010070ul
+
+/// COFVID Control MSR Register
+typedef struct {
+ UINT64 CpuFid:6; ///< CpuFid
+ UINT64 CpuDid:3; ///< CpuDid
+ UINT64 CpuVid_6_0:7; ///< CpuVid[6:0]
+ UINT64 PstateId:3; ///< Pstate ID
+ UINT64 :1; ///< Reserved
+ UINT64 CpuVid_7:1; ///< CpuVid[7]
+ UINT64 :1; ///< Reserved
+ UINT64 NbPstate:1; ///< Northbridge P-state
+ UINT64 :1; ///< Reserved
+ UINT64 NbVid:8; ///< NbVid
+ UINT64 :32; ///< Reserved
+} COFVID_CTRL_MSR;
+
+#define COFVID_CTRL_MSR_CurCpuVid_6_0_OFFSET 9
+#define COFVID_CTRL_MSR_CurCpuVid_6_0_WIDTH 7
+#define COFVID_CTRL_MSR_CurCpuVid_6_0_MASK 0xfe00
+#define COFVID_CTRL_MSR_CurCpuVid_7_OFFSET 20
+#define COFVID_CTRL_MSR_CurCpuVid_7_WIDTH 1
+#define COFVID_CTRL_MSR_CurCpuVid_7_MASK 0x100000ul
+
+/* SVI VID Encoding */
+
+///< Union structure of VID in SVI1/SVI2 modes
+typedef union {
+ UINT32 RawVid; ///< Raw VID value
+ struct { ///< SVI2 mode VID structure
+ UINT32 Vid_6_0:7; ///< Vid[6:0] of SVI2 mode
+ UINT32 Vid_7:1; ///< Vid[7] of SVI2 mode
+ } SVI2;
+ struct { ///< SVI1 mode VID structure
+ UINT32 Vid_LSB_Ignore:1; ///< Ignored LSB of 8bit VID encoding in SVI1 mode
+ UINT32 Vid_6_0:1; ///< Vid[6:0] of SVI mode
+ } SVI1;
+} SVI_VID;
+
+
+#define SetF16KbCpuVid(CofVidStsMsr, NewCpuVid) ( \
+ ((COFVID_CTRL_MSR *) CofVidStsMsr)->CurCpuVid_6_0) = ((SVI_VID *) NewCpuVid)->SVI2.Vid_6_0; \
+ ((COFVID_CTRL_MSR *) CofVidStsMsr)->CurCpuVid_7) = ((SVI_VID *) NewCpuVid)->SVI2.Vid_7; \
+)
+
+
+/* COFVID Status Register 0xC0010071 */
+#define MSR_COFVID_STS 0xC0010071ul
+
+/// COFVID Status MSR Register
+typedef struct {
+ UINT64 CurCpuFid:6; ///< Current CpuFid
+ UINT64 CurCpuDid:3; ///< Current CpuDid
+ UINT64 CurCpuVid_6_0:7; ///< Current CpuVid[6:0]
+ UINT64 CurPstate:3; ///< Current Pstate
+ UINT64 :1; ///< Reserved
+ UINT64 CurCpuVid_7:1; ///< Current CpuVid[7]
+ UINT64 :2; ///< Reserved
+ UINT64 NbPstateDis:1; ///< NbPstate Disable
+ UINT64 :8;
+ UINT64 StartupPstate:3; ///< Startup Pstate
+ UINT64 :14; ///< Reserved
+ UINT64 MaxCpuCof:6; ///< MaxCpuCof
+ UINT64 :1; ///< Reserved
+ UINT64 CurPstateLimit:3; ///< Current Pstate Limit
+ UINT64 MaxNbCof:5; ///< MaxNbCof
+} COFVID_STS_MSR;
+
+#define COFVID_STS_MSR_CurCpuVid_6_0_OFFSET 9
+#define COFVID_STS_MSR_CurCpuVid_6_0_WIDTH 7
+#define COFVID_STS_MSR_CurCpuVid_6_0_MASK 0xfe00
+#define COFVID_STS_MSR_CurCpuVid_7_OFFSET 20
+#define COFVID_STS_MSR_CurCpuVid_7_WIDTH 1
+#define COFVID_STS_MSR_CurCpuVid_7_MASK 0x100000ul
+
+#define GetF16KbCurCpuVid(CofVidStsMsr) ( \
+ (((COFVID_STS_MSR *) CofVidStsMsr)->CurCpuVid_7 << COFVID_STS_MSR_CurCpuVid_6_0_WIDTH) \
+ | ((COFVID_STS_MSR *) CofVidStsMsr)->CurCpuVid_6_0)
+
+
+/*
+ * Family 16h Kabini CPU Power Management PCI definitions
+ *
+ */
+/* Link Initialization Status D18F0x1A0 */
+#define LINK_INIT_STATUS_REG 0x1A0
+#define LINK_INIT_STATUS_REG_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_0, LINK_INIT_STATUS_REG))
+
+/// Link Initialization Status
+typedef struct {
+ UINT32 InitComplete0:2; ///< Initialization complete for link 0
+ UINT32 InitComplete1:2; ///< Initialization complete for link 1
+ UINT32 :20; ///< Reserved
+ UINT32 IntNbExtCap:4; ///< Internal NB extneded capability
+ UINT32 :3; ///< Reserved
+ UINT32 InitStatusValid:1; ///< Initialization status valid
+} LINK_INIT_STATUS_REGISTER;
+
+/* NB Configuration 1 Low F3x88 */
+#define NB_CFG1_LOW_REG 0x88
+#define NB_CFG1_LOW_REG_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, NB_CFG1_LOW_REG))
+
+/// Power Control Miscellaneous PCI Register
+typedef struct {
+ UINT32 :18; ///< Reserved
+ UINT32 DisCstateBoostBlockPstateUp:1; ///< DisCstateBoostBlockPstateUp
+ UINT32 :12; ///< Reserved
+ UINT32 DisCohLdtCfg:1; ///< Disable coherent link configuration accesses
+} NB_CFG1_LOW_REG_REGISTER;
+
+/* Power Control Miscellaneous Register F3xA0 */
+#define PW_CTL_MISC_REG 0xA0
+#define PW_CTL_MISC_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, PW_CTL_MISC_REG))
+
+/// Power Control Miscellaneous PCI Register
+typedef struct {
+ UINT32 PsiVid:7; ///< PSI_L VID threshold VID[6:0]
+ UINT32 PsiVidEn:1; ///< PSI_L VID enable
+ UINT32 PsiVid_7:1; ///< PSI_L VID threshold VID[7]
+ UINT32 :1; ///< Reserved
+ UINT32 IdleExitEn:1; ///< Idle exit enable
+ UINT32 PllLockTime:3; ///< PLL synchronization lock time
+ UINT32 Svi2HighFreqSel:1; ///< SVI2 high frequency select
+ UINT32 :1; ///< Reserved
+ UINT32 ConfigId:12; ///< Configuration ID
+ UINT32 :3; ///< Reserved
+ UINT32 CofVidProg:1; ///< COF and VID of Pstate programmed
+} POWER_CTRL_MISC_REGISTER;
+
+
+/* Clock Power/Timing Control 0 Register F3xD4 */
+#define CPTC0_REG 0xD4
+#define CPTC0_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, CPTC0_REG))
+
+/// Clock Power Timing Control PCI Register
+typedef struct {
+ UINT32 MaxSwPstateCpuCof:6; ///< Maximum software P-state core COF
+ UINT32 :2; ///< Reserved
+ UINT32 ClkRampHystSel:4; ///< Clock Ramp Hysteresis Select
+ UINT32 ClkRampHystCtl:1; ///< Clock Ramp Hysteresis Control
+ UINT32 :1; ///< Reserved
+ UINT32 CacheFlushImmOnAllHalt:1; ///< Cache Flush Immediate on All Halt
+ UINT32 :5; ///< Reserved
+ UINT32 PowerStepDown:4; ///< Power Step Down
+ UINT32 PowerStepUp:4; ///< Power Step Up
+ UINT32 NbClkDiv:3; ///< NbClkDiv
+ UINT32 NbClkDivApplyAll:1; ///< NbClkDivApplyAll
+} CLK_PWR_TIMING_CTRL_REGISTER;
+
+
+/* Clock Power/Timing Control 1 Register F3xD8 */
+#define CPTC1_REG 0xD8
+#define CPTC1_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, CPTC1_REG))
+
+/// Clock Power Timing Control 1 PCI Register
+typedef struct {
+ UINT32 :4; ///< Reserved
+ UINT32 VSRampSlamTime:3; ///< Voltage stabilization ramp time
+ UINT32 :25; ///< Reserved
+} CLK_PWR_TIMING_CTRL1_REGISTER;
+
+
+/* Northbridge Capabilities Register F3xE8 */
+#define NB_CAPS_REG 0xE8
+#define NB_CAPS_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, NB_CAPS_REG))
+
+/// Northbridge Capabilities PCI Register
+typedef struct {
+ UINT32 :1; ///< Reserved
+ UINT32 DualNode:1; ///< Dual-node multi-processor capable
+ UINT32 EightNode:1; ///< Eight-node multi-processor capable
+ UINT32 Ecc:1; ///< ECC capable
+ UINT32 Chipkill:1; ///< Chipkill ECC capable
+ UINT32 :3; ///< Reserved
+ UINT32 MctCap:1; ///< Memory controller capable
+ UINT32 SvmCapable:1; ///< SVM capable
+ UINT32 HtcCapable:1; ///< HTC capable
+ UINT32 :3; ///< Reserved
+ UINT32 MultVidPlane:1; ///< Multiple VID plane capable
+ UINT32 :4; ///< Reserved
+ UINT32 x2Apic:1; ///< x2Apic capability
+ UINT32 :4; ///< Reserved
+ UINT32 MemPstateCap:1; ///< Memory P-state capable
+ UINT32 :3; ///< Reserved
+ UINT32 Succor:1; ///< SUCCOR
+ UINT32 :3; ///< Reserved
+} NB_CAPS_REGISTER;
+
+/* Sample and Residency Timers Register D18F4x110 */
+#define SAMPLE_RESIDENCY_TIMER_REG 0x110
+#define SAMPLE_RESIDENCY_TIMER_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_4, SAMPLE_RESIDENCY_TIMER_REG))
+
+/// Sample and Residency Timers Register
+typedef struct {
+ UINT32 CSampleTimer:12; ///< CSampleTimer
+ UINT32 FastCSampleTimer:1; ///< FastCSampleTimer
+ UINT32 MinResTmr:8; ///< Minimum residency timer
+ UINT32 :11; ///< Reserved
+} SAMPLE_RESIDENCY_TIMER_REGISTER;
+
+/* C-state Control 1 Register D18F4x118 */
+#define CSTATE_CTRL1_REG 0x118
+#define CSTATE_CTRL1_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_4, CSTATE_CTRL1_REG))
+
+/// C-state Control 1 Register
+typedef struct {
+ UINT32 CpuPrbEnCstAct0:1; ///< Core direct probe enable
+ UINT32 CacheFlushEnCstAct0:1; ///< Cache flush enable
+ UINT32 CacheFlushTmrSelCstAct0:2; ///< Cache flush timer select
+ UINT32 :1; ///< Reserved
+ UINT32 ClkDivisorCstAct0:3; ///< Clock divisor
+ UINT32 PwrGateEnCstAct0:1; ///< Power gate enable
+ UINT32 PwrOffEnCstAct0:1; ///< C-state action field 3
+ UINT32 NbPwrGate0:1; ///< NB power-gating 0
+ UINT32 NbClkGate0:1; ///< NB clock-gating 0
+ UINT32 SelfRefr0:1; ///< Self-refresh 0
+ UINT32 SelfRefrEarly0:1; ///< Allow early self-refresh 0
+ UINT32 :2; ///< Reserved
+ UINT32 CpuPrbEnCstAct1:1; ///< Core direct probe enable
+ UINT32 CacheFlushEnCstAct1:1; ///< Cache flush eable
+ UINT32 CacheFlushTmrSelCstAct1:2; ///< Cache flush timer select
+ UINT32 :1; ///< Reserved
+ UINT32 ClkDivisorCstAct1:3; ///< Clock divisor
+ UINT32 PwrGateEnCstAct1:1; ///< Power gate enable
+ UINT32 PwrOffEnCstAct1:1; ///< C-state action field 3
+ UINT32 NbPwrGate1:1; ///< NB power-gating 1
+ UINT32 NbClkGate1:1; ///< NB clock-gating 1
+ UINT32 SelfRefr1:1; ///< Self-refresh 1
+ UINT32 SelfRefrEarly1:1; ///< Allow early self-refresh 1
+ UINT32 :2; ///< Reserved
+} CSTATE_CTRL1_REGISTER;
+
+
+/* C-state Control 2 Register D18F4x11C */
+#define CSTATE_CTRL2_REG 0x11C
+#define CSTATE_CTRL2_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_4, CSTATE_CTRL2_REG))
+
+/// C-state Control 2 Register
+typedef struct {
+ UINT32 CpuPrbEnCstAct2:1; ///< Core direct probe enable
+ UINT32 CacheFlushEnCstAct2:1; ///< Cache flush eable
+ UINT32 CacheFlushTmrSelCstAct2:2; ///< Cache flush timer select
+ UINT32 :1; ///< Reserved
+ UINT32 ClkDivisorCstAct2:3; ///< Clock divisor
+ UINT32 PwrGateEnCstAct2:1; ///< Power gate enable
+ UINT32 PwrOffEnCstAct2:1; ///< C-state action field 3
+ UINT32 NbPwrGate2:1; ///< NB power-gating 2
+ UINT32 NbClkGate2:1; ///< NB clock-gating 2
+ UINT32 SelfRefr2:1; ///< Self-refresh 2
+ UINT32 SelfRefrEarly2:1; ///< Allow early self-refresh 2
+ UINT32 :18; ///< Reserved
+} CSTATE_CTRL2_REGISTER;
+
+
+/* Cstate Policy Control 1 Register D18F4x128 */
+#define CSTATE_POLICY_CTRL1_REG 0x128
+#define CSTATE_POLICY_CTRL1_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_4, CSTATE_POLICY_CTRL1_REG))
+
+/// Cstate Policy Control 1 Register
+typedef struct {
+ UINT32 :2; ///< Reserved
+ UINT32 HaltCstateIndex:3; ///< Specifies the IO-based C-state that is invoked by a HLT instruction
+ UINT32 CacheFlushTmr:7; ///< Cache flush timer
+ UINT32 :6; ///< Reserved
+ UINT32 CacheFlushSucMonThreshold:3; ///< Cache flush success monitor threshold
+ UINT32 CacheFlushSucMonTmrSel:2; ///< Cache flush success monitor timer select
+ UINT32 CacheFlushSucMonMispredictAct:2; ///< Cache flush success monitor mispredict action
+ UINT32 :6; ///< Reserved
+ UINT32 CstateMsgDis:1; ///< C-state messaging disable
+} CSTATE_POLICY_CTRL1_REGISTER;
+
+
+/* Core Performance Boost Control Register D18F4x15C */
+
+/// Core Performance Boost Control Register
+typedef struct {
+ UINT32 BoostSrc:2; ///< Boost source
+ UINT32 NumBoostStates:3; ///< Number of boosted states
+ UINT32 :2; ///< Reserved
+ UINT32 ApmMasterEn:1; ///< APM master enable
+ UINT32 CstatePowerEn:1; ///< C-state Power Enable
+ UINT32 :22; ///< Reserved
+ UINT32 BoostLock:1; ///<
+} CPB_CTRL_REGISTER;
+
+
+/* Northbridge Capabilities 2 F5x84*/
+#define NB_CAPS_REG2 0x84
+#define NB_CAPS_REG2_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_CAPS_REG2))
+
+/// Northbridge Capabilities 2 PCI Register
+typedef struct {
+ UINT32 CmpCap:8; ///< CMP capable
+ UINT32 :4; ///< Reserved
+ UINT32 DctEn:4; ///< DCT enabled
+ UINT32 DdrMaxRate:5; ///< maximum DDR rate
+ UINT32 :3; ///< Reserved
+ UINT32 DdrMaxRateEnf:5; ///< enforced maximum DDR rate:
+ UINT32 :3; ///< Reserved
+} NB_CAPS_2_REGISTER;
+
+/* Northbridge Configuration 4 F5x88*/
+#define NB_CFG_REG4 0x88
+#define NB_CFG_REG4_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_CFG_REG4))
+
+/// Northbridge Configuration 4 PCI Register
+typedef struct {
+ UINT32 CC6PstateWakeUpDis:1; ///< CC6PstateWakeUpDis
+ UINT32 :17; ///< Reserved
+ UINT32 EnCstateBoostBlockCC6Exit:1;///< EnCstateBoostBlockCC6Exit
+ UINT32 :5; ///< Reserved
+ UINT32 DisHbNpReqBusLock:1; ///< DisHbNpReqBusLock
+ UINT32 :7; ///< Reserved
+} NB_CFG_4_REGISTER;
+
+typedef struct {
+ UINT32 Bits_19_0:20; ///< Bits[19:0]
+ UINT32 Bits_31_20:12; ///< Reserved
+} pmgmt_str0;
+
+typedef struct {
+ UINT32 Bits_19_0:20; ///< Bits[19:0]
+ UINT32 Bits_31_20:12; ///< Reserved
+} pmgmt_str1;
+
+/* Northbridge P-state [3:0] F5x1[6C:60] */
+
+/// Northbridge P-state Register
+typedef struct {
+ UINT32 NbPstateEn:1; ///< NB P-state enable
+ UINT32 NbFid:6; ///< NB frequency ID
+ UINT32 NbDid:1; ///< NB divisor ID
+ UINT32 :2; ///< Reserved
+ UINT32 NbVid_6_0:7; ///< NB VID[6:0]
+ UINT32 :1; ///< Reserved
+ UINT32 MemPstate:1; ///< Memory P-State
+ UINT32 :2; ///< Reserved
+ UINT32 NbVid_7:1; ///< NB VID[7]
+ UINT32 NbIddDiv:2; ///< northbridge current divisor
+ UINT32 NbIddValue:8; ///< northbridge current value
+} NB_PSTATE_REGISTER;
+
+#define NB_PSTATE_REGISTER_NbVid_6_0_OFFSET 10
+#define NB_PSTATE_REGISTER_NbVid_6_0_WIDTH 7
+#define NB_PSTATE_REGISTER_NbVid_6_0_MASK 0x0001FC00ul
+#define NB_PSTATE_REGISTER_NbVid_7_OFFSET 21
+#define NB_PSTATE_REGISTER_NbVid_7_WIDTH 1
+#define NB_PSTATE_REGISTER_NbVid_7_MASK 0x00200000ul
+
+#define GetF16KbNbVid(NbPstateRegister) ( \
+ (((NB_PSTATE_REGISTER *) NbPstateRegister)->NbVid_7 << NB_PSTATE_REGISTER_NbVid_6_0_WIDTH) \
+ | ((NB_PSTATE_REGISTER *) NbPstateRegister)->NbVid_6_0)
+
+#define SetF16KbNbVid(NbPstateRegister, NewNbVid) { \
+ ((NB_PSTATE_REGISTER *) NbPstateRegister)->NbVid_6_0 = ((SVI_VID *) NewNbVid)->SVI2.Vid_6_0; \
+ ((NB_PSTATE_REGISTER *) NbPstateRegister)->NbVid_7 = ((SVI_VID *) NewNbVid)->SVI2.Vid_7; \
+}
+
+/* Northbridge P-state Status */
+#define NB_PSTATE_CTRL 0x170
+#define NB_PSTATE_CTRL_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_PSTATE_CTRL))
+
+/// Northbridge P-state Control Register
+typedef struct {
+ UINT32 NbPstateMaxVal:2; ///< NB P-state maximum value
+ UINT32 :1; ///< Reserved
+ UINT32 NbPstateLo:2; ///< NB P-state low
+ UINT32 :1; ///< Reserved
+ UINT32 NbPstateHi:2; ///< NB P-state high
+ UINT32 :1; ///< Reserved
+ UINT32 NbPstateThreshold:4; ///< NB P-state threshold
+ UINT32 NbPstateDisOnP0:1; ///< NB P-state disable on P0
+ UINT32 SwNbPstateLoDis:1; ///< Software NB P-state low disable
+ UINT32 :8; ///< Reserved
+ UINT32 NbPstateGnbSlowDis:1; ///< NbPstateGnbSlowDis
+ UINT32 NbPstateLoRes:3; ///< NB P-state low residency timer
+ UINT32 NbPstateHiRes:3; ///< NB P-state high residency timer
+ UINT32 NbPstateFidVidSbcEn:1; ///< NbPstateFidVidSbcEn
+ UINT32 MemPstateDis:1; ///< Memory P-state disable
+} NB_PSTATE_CTRL_REGISTER;
+
+
+/* Northbridge P-state Status */
+#define NB_PSTATE_STATUS 0x174
+#define NB_PSTATE_STATUS_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_PSTATE_STATUS))
+
+/// Northbridge P-state Status Register
+typedef struct {
+ UINT32 NbPstateDis:1; ///< Nb pstate disable
+ UINT32 StartupNbPstate:2; ///< startup northbridge Pstate number
+ UINT32 CurNbFid:6; ///< Current NB FID
+ UINT32 CurNbDid:1; ///< Current NB DID
+ UINT32 :2; ///< Reserved
+ UINT32 CurNbVid_6_0:7; ///< Current NB VID[6:0]
+ UINT32 CurNbPstate:2; ///< Current NB Pstate
+ UINT32 :1; ///< Reserved
+ UINT32 CurNbPstateLo:1; ///< Current NB Pstate maps to Lo or Hi
+ UINT32 CurNbVid_7:1; ///< Current NB VID[7]
+ UINT32 CurMemPstate:1; ///< Current memory P-state
+ UINT32 :7; ///< Reserved
+} NB_PSTATE_STS_REGISTER;
+
+#define NB_PSTATE_STS_REGISTER_CurNbVid_6_0_OFFSET 12
+#define NB_PSTATE_STS_REGISTER_CurNbVid_6_0_WIDTH 7
+#define NB_PSTATE_STS_REGISTER_CurNbVid_6_0_MASK 0x0007F000ul
+#define NB_PSTATE_STS_REGISTER_CurNbVid_7_OFFSET 23
+#define NB_PSTATE_STS_REGISTER_CurNbVid_7_WIDTH 1
+#define NB_PSTATE_STS_REGISTER_CurNbVid_7_MASK 0x00800000ul
+
+#define GetF16KbCurNbVid(NbPstateStsRegister) ( \
+ (((NB_PSTATE_STS_REGISTER *) NbPstateStsRegister)->CurNbVid_7 << NB_PSTATE_STS_REGISTER_CurNbVid_6_0_WIDTH) \
+ | ((NB_PSTATE_STS_REGISTER *) NbPstateStsRegister)->CurNbVid_6_0)
+
+/* Miscellaneous Voltages */
+#define MISC_VOLTAGES 0x17C
+#define MISC_VOLTAGES_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, MISC_VOLTAGES))
+
+/// Miscellaneous Voltages Register
+typedef struct {
+ UINT32 MaxVid:8; ///< Maximum Voltage
+ UINT32 :2; ///< Reserved
+ UINT32 MinVid:8; ///< Minimum Voltage
+ UINT32 :5; ///< Reserved
+ UINT32 NbPsi0Vid:8; ///< Northbridge PSI0_L VID threshold
+ UINT32 NbPsi0VidEn:1; ///< Northbridge PSI0_L VID enable
+} MISC_VOLTAGE_REGISTER;
+
+
+/* Clock Power/Timing Control 5 Register F5x188 */
+#define CPTC5_REG 0x188
+#define CPTC5_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, CPTC5_REG))
+
+/// Clock Power Timing Control 5 Register
+typedef struct {
+ UINT32 NbOffsetTrim:2; ///< Northbridge offset trim
+ UINT32 NbLoadLineTrim:3; ///< Northbridge load line trim
+ UINT32 NbPsi1:1; ///< Northbridge PSI1_L
+ UINT32 :1; ///< Northbridge telemetry functionality.
+ UINT32 :25; ///< Reserved
+} CLK_PWR_TIMING_CTRL_5_REGISTER;
+
+#endif /* _CPU_F16_KB_POWERMGMT_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPowerMgmtSystemTables.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPowerMgmtSystemTables.c
new file mode 100644
index 0000000..fac2288
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPowerMgmtSystemTables.c
@@ -0,0 +1,153 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Models 0x00 - 0x0F Kabini Power Management related initialization table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPowerMgmtSystemTables.h"
+#include "F16KbUtilities.h"
+#include "F16KbCoreAfterReset.h"
+#include "F16KbNbAfterReset.h"
+#include "F16KbPowerCheck.h"
+#include "IdsF16KbAllService.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBPOWERMGMTSYSTEMTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF16KbSysPmTable (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **SysPmTblPtr,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* Family 16h Kabini Only Table */
+/* ---------------------- */
+CONST SYS_PM_TBL_STEP ROMDATA CpuF16KbSysPmTableArray[] =
+{
+ /// @todo
+ IDS_INITIAL_F16_KB_PM_STEP
+ // Step 1 - Configure F3x[84:80]. Handled by PCI register table.
+
+ // Step 2 - Disable NB Pstate, if required
+ // Execute both cold & warm
+ {
+ 0, // ExeFlags
+ F16KbNbPstateDis // Function Pointer
+ },
+
+ // Step 3 - Core Minimum P-state Transition Sequence After Warm Reset
+ // Execute only after warm reset
+ {
+ PM_EXEFLAGS_WARM_ONLY, // ExeFlags
+ F16KbPmCoreAfterReset // Function Pointer
+ },
+
+ // Step 4 - NB P-state COF and VID Synchronization After Warm Reset
+ // Execute only after warm reset
+ {
+ PM_EXEFLAGS_WARM_ONLY, // ExeFlags
+ F16KbPmNbAfterReset // Function Pointer
+ },
+
+ // Step 5 - Power Check
+ // Execute only after warm reset
+ {
+ 0, // ExeFlags
+ F16KbPmPwrCheck // Function Pointer
+ },
+
+ IDS_F16_KB_PM_CUSTOM_STEP
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the appropriate table of steps to perform to initialize the power management
+ * subsystem.
+ *
+ * @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] SysPmTblPtr Points to the first entry in the table.
+ * @param[out] NumberOfElements Number of valid entries in the table.
+ * @param[in] StdHeader Header for library and services.
+ *
+ */
+VOID
+GetF16KbSysPmTable (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **SysPmTblPtr,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *NumberOfElements = (sizeof (CpuF16KbSysPmTableArray) / sizeof (SYS_PM_TBL_STEP));
+ *SysPmTblPtr = CpuF16KbSysPmTableArray;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPsi.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPsi.c
new file mode 100644
index 0000000..7d9d4d2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPsi.c
@@ -0,0 +1,278 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini PSI Initialization
+ *
+ * Enables Power Status Indicator (PSI) feature
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuF16PowerMgmt.h"
+#include "F16KbPowerMgmt.h"
+#include "cpuFeatures.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "CommonReturns.h"
+#include "cpuPsi.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBPSI_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+F16KbPmVrmLowPowerModeEnable (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PCI_ADDR PciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Entry point for enabling Power Status Indicator
+ *
+ * This function must be run after all P-State routines have been executed
+ *
+ * @param[in] PsiServices The current CPU's family services.
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+F16KbInitializePsi (
+ IN PSI_FAMILY_SERVICES *PsiServices,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ if ((EntryPoint & (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC)) != 0) {
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+ // Configure PsiVid
+ F16KbPmVrmLowPowerModeEnable (FamilySpecificServices, PlatformConfig, PciAddress, StdHeader);
+ }
+
+ return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Sets up PSI_L operation.
+ *
+ * This function implements the LowPowerThreshold parameter.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] PciAddress Segment, bus, device number of the node to transition.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+F16KbPmVrmLowPowerModeEnable (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PCI_ADDR PciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PSTATE_MSR PstateMsr;
+ CLK_PWR_TIMING_CTRL2_REGISTER ClkPwrTimingCtrl2;
+ POWER_CTRL_MISC_REGISTER PwrCtrlMisc;
+ UINT32 CoreVrmLowPowerThreshold;
+ UINT32 Pstate;
+ UINT32 HwPstateMaxVal;
+ UINT32 PstateCurrent;
+ UINT32 NextPstateCurrent;
+ UINT32 PreviousVid;
+ UINT32 CurrentVid;
+
+ NB_PSTATE_REGISTER NbPstateReg;
+ NB_PSTATE_CTRL_REGISTER NbPsCtrl;
+ MISC_VOLTAGE_REGISTER MiscVoltageReg;
+ UINT32 NbVrmLowPowerThreshold;
+ UINT32 NbPstate;
+ UINT32 NbPstateMaxVal;
+ UINT32 NbPstateCurrent;
+ UINT32 NextNbPstateCurrent;
+ UINT32 PreviousNbVid;
+ UINT32 CurrentNbVid;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbPmVrmLowPowerModeEnable\n");
+
+ if (PlatformConfig->VrmProperties[CoreVrm].LowPowerThreshold != 0) {
+ // Set up PSI0_L for VDD
+ CoreVrmLowPowerThreshold = PlatformConfig->VrmProperties[CoreVrm].LowPowerThreshold;
+ IDS_HDT_CONSOLE (CPU_TRACE, " Core VRM - LowPowerThreshold: %d\n", CoreVrmLowPowerThreshold);
+ PreviousVid = 0xFF;
+ CurrentVid = 0xFF;
+
+ PciAddress.AddressValue = CPTC2_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &ClkPwrTimingCtrl2, StdHeader);
+ HwPstateMaxVal = ClkPwrTimingCtrl2.HwPstateMaxVal;
+ ASSERT (HwPstateMaxVal < NM_PS_REG);
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " HwPstateMaxVal %d\n", HwPstateMaxVal);
+ // Check P-state from P0 to HwPstateMaxVal
+ for (Pstate = 0; Pstate <= HwPstateMaxVal; Pstate++) {
+ FamilySpecificServices->GetProcIddMax (FamilySpecificServices, (UINT8) Pstate, &PstateCurrent, StdHeader);
+
+ LibAmdMsrRead ((UINT32) (Pstate + PS_REG_BASE), (UINT64 *) &PstateMsr, StdHeader);
+ CurrentVid = (UINT32) PstateMsr.CpuVid;
+
+ if (Pstate == HwPstateMaxVal) {
+ NextPstateCurrent = 0;
+ } else {
+ // Check P-state from P1 to HwPstateMaxVal
+ FamilySpecificServices->GetProcIddMax (FamilySpecificServices, (UINT8) (Pstate + 1), &NextPstateCurrent, StdHeader);
+ }
+
+ if ((PstateCurrent <= CoreVrmLowPowerThreshold) &&
+ (NextPstateCurrent <= CoreVrmLowPowerThreshold) &&
+ (CurrentVid != PreviousVid)) {
+ // Program PsiVid and PsiVidEn if PSI state is found and stop searching.
+ PciAddress.AddressValue = PW_CTL_MISC_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &PwrCtrlMisc, StdHeader);
+ PwrCtrlMisc.PsiVid = CurrentVid;
+ PwrCtrlMisc.PsiVidEn = 1;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PwrCtrlMisc, StdHeader);
+ IDS_HDT_CONSOLE (CPU_TRACE, " PsiVid is enabled at P-state %d. PsiVid: %d\n", Pstate, CurrentVid);
+ break;
+ } else {
+ PstateCurrent = NextPstateCurrent;
+ PreviousVid = CurrentVid;
+ }
+ }
+ }
+
+ if (PlatformConfig->VrmProperties[NbVrm].LowPowerThreshold != 0) {
+ // Set up NBPSI0_L for VDDNB
+ NbVrmLowPowerThreshold = PlatformConfig->VrmProperties[NbVrm].LowPowerThreshold;
+ IDS_HDT_CONSOLE (CPU_TRACE, " NB VRM - LowPowerThreshold: %d\n", NbVrmLowPowerThreshold);
+ PreviousNbVid = 0xFF;
+ CurrentNbVid = 0xFF;
+
+ PciAddress.AddressValue = NB_PSTATE_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+ NbPstateMaxVal = NbPsCtrl.NbPstateMaxVal;
+ ASSERT (NbPstateMaxVal < NM_NB_PS_REG);
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " NbPstateMaxVal %d\n", NbPstateMaxVal);
+ for (NbPstate = 0; NbPstate <= NbPstateMaxVal; NbPstate++) {
+ // Check only valid NB P-state
+ if (FamilySpecificServices->GetNbIddMax (FamilySpecificServices, (UINT8) NbPstate, &NbPstateCurrent, StdHeader) != TRUE) {
+ continue;
+ }
+
+ PciAddress.Address.Register = (NB_PSTATE_0 + (sizeof (NB_PSTATE_REGISTER) * NbPstate));
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPstateReg, StdHeader);
+ CurrentNbVid = (UINT32) GetF16KbNbVid (&NbPstateReg);
+
+ if (NbPstate == NbPstateMaxVal) {
+ NextNbPstateCurrent = 0;
+ } else {
+ // Check only valid NB P-state
+ if (FamilySpecificServices->GetNbIddMax (FamilySpecificServices, (UINT8) (NbPstate + 1), &NextNbPstateCurrent, StdHeader) != TRUE) {
+ continue;
+ }
+ }
+
+ if ((NbPstateCurrent <= NbVrmLowPowerThreshold) &&
+ (NextNbPstateCurrent <= NbVrmLowPowerThreshold) &&
+ (CurrentNbVid != PreviousNbVid)) {
+ // Program NbPsi0Vid and NbPsi0VidEn if PSI state is found and stop searching.
+ PciAddress.AddressValue = MISC_VOLTAGES_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &MiscVoltageReg, StdHeader);
+ MiscVoltageReg.NbPsi0Vid = CurrentNbVid;
+ MiscVoltageReg.NbPsi0VidEn = 1;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &MiscVoltageReg, StdHeader);
+ IDS_HDT_CONSOLE (CPU_TRACE, " NbPsi0Vid is enabled at NB P-state %d. NbPsi0Vid: %d\n", NbPstate, CurrentNbVid);
+ break;
+ } else {
+ PreviousNbVid = CurrentNbVid;
+ }
+ }
+ }
+}
+
+
+CONST PSI_FAMILY_SERVICES ROMDATA F16KbPsiSupport =
+{
+ 0,
+ (PF_PSI_IS_SUPPORTED) CommonReturnTrue,
+ F16KbInitializePsi
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPstate.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPstate.c
new file mode 100644
index 0000000..38913c1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbPstate.c
@@ -0,0 +1,613 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini Pstate feature support functions.
+ *
+ * Provides the functions necessary to initialize the Pstate feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuPstateTables.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFamRegisters.h"
+#include "cpuF16Utilities.h"
+#include "F16KbUtilities.h"
+#include "cpuF16PowerMgmt.h"
+#include "F16KbPowerMgmt.h"
+#include "CommonReturns.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBPSTATE_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+F16KbGetPowerStepValueInTime (
+ IN OUT UINT32 *PowerStepPtr
+ );
+
+VOID
+STATIC
+F16KbGetPllValueInTime (
+ IN OUT UINT32 *PllLockTimePtr
+ );
+
+
+AGESA_STATUS
+F16KbGetPstateTransLatency (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN PSTATE_LEVELING *PStateLevelingBufferStructPtr,
+ IN PCI_ADDR *PciAddress,
+ OUT UINT32 *TransitionLatency,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+F16KbGetPstateFrequency (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN UINT8 StateNumber,
+ OUT UINT32 *FrequencyInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+F16KbGetPstatePower (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN UINT8 StateNumber,
+ OUT UINT32 *PowerInMw,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+F16KbGetPstateMaxState (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ OUT UINT32 *MaxPStateNumber,
+ OUT UINT8 *NumberOfBoostStates,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+F16KbGetPstateRegisterInfo (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN UINT32 PState,
+ OUT BOOLEAN *PStateEnabled,
+ IN OUT UINT32 *IddVal,
+ IN OUT UINT32 *IddDiv,
+ OUT UINT32 *SwPstateNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if Pstate PSD is dependent.
+ *
+ * @param[in] PstateCpuServices Pstate CPU services.
+ * @param[in,out] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE PSD is dependent.
+ * @retval FALSE PSD is independent.
+ *
+ */
+BOOLEAN
+STATIC
+F16KbIsPstatePsdDependent (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbIsPstatePsdDependent\n");
+ // Family 16h KB defaults to independent PSD
+ IDS_HDT_CONSOLE (CPU_TRACE, " P-state PSD is independent.\n");
+ return FALSE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to get Pstate Transition Latency.
+ *
+ * Calculate TransitionLatency by power step value and pll value.
+ *
+ * @param[in] PstateCpuServices Pstate CPU services.
+ * @param[in] PStateLevelingBufferStructPtr Pstate row data buffer pointer
+ * @param[in] PciAddress Pci address
+ * @param[out] TransitionLatency The transition latency.
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F16KbGetPstateTransLatency (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN PSTATE_LEVELING *PStateLevelingBufferStructPtr,
+ IN PCI_ADDR *PciAddress,
+ OUT UINT32 *TransitionLatency,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 CpuFid;
+ UINT32 HwP0CpuFid;
+ UINT32 PowerStepDown;
+ UINT32 PowerStepUp;
+ UINT32 PllLockTime;
+ UINT32 LocalPciRegister;
+ UINT32 k;
+ UINT32 PStateMaxValueOnCurrentCore;
+ UINT32 TransAndBusMastLatency;
+ UINT64 MsrData;
+ BOOLEAN CpuFidSameFlag;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetPstateTransLatency\n");
+
+ CpuFidSameFlag = TRUE;
+ HwP0CpuFid = 0;
+
+ // Get PStateMaxValue
+ PciAddress->Address.Register = CPTC2_REG;
+ PciAddress->Address.Function = FUNC_3;
+ LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+ PStateMaxValueOnCurrentCore = ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->HwPstateMaxVal;
+
+ //
+ //Check if MSRC001_00[6B:64][CpuFid] is the same value for all P-states
+ //
+ for (k = 0; k <= PStateMaxValueOnCurrentCore; k++) {
+ LibAmdMsrRead ((MSR_PSTATE_0 + k), &MsrData, StdHeader);
+ CpuFid = (UINT32) (((PSTATE_MSR *) &MsrData)->CpuFid);
+ if (k == 0) {
+ HwP0CpuFid = CpuFid;
+ }
+ if (HwP0CpuFid != CpuFid) {
+ CpuFidSameFlag = FALSE;
+ break;
+ }
+ }
+
+ PciAddress->Address.Register = CPTC0_REG;
+ PciAddress->Address.Function = FUNC_3;
+ LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+
+ // PowerStepDown - Bits 20:23
+ PowerStepDown = ((CLK_PWR_TIMING_CTRL_REGISTER *) &LocalPciRegister)->PowerStepDown;
+
+ // PowerStepUp - Bits 24:27
+ PowerStepUp = ((CLK_PWR_TIMING_CTRL_REGISTER *) &LocalPciRegister)->PowerStepUp;
+
+ // Convert the raw numbers in TempVar8_a and TempVar8_b into time
+ F16KbGetPowerStepValueInTime (&PowerStepDown);
+ F16KbGetPowerStepValueInTime (&PowerStepUp);
+
+ //
+ //(15 * (F3xD4[PowerStepDown] + F3xD4[PowerStepUp]) /1000) us
+ //
+ TransAndBusMastLatency =
+ (15 * (PowerStepDown + PowerStepUp) + 999) / 1000;
+
+ if (!CpuFidSameFlag) {
+ //
+ //+ F3xA0[PllLockTime]
+ //
+ PciAddress->Address.Register = PW_CTL_MISC_REG;
+ LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+
+ PllLockTime = ((POWER_CTRL_MISC_REGISTER *) &LocalPciRegister)->PllLockTime;
+ F16KbGetPllValueInTime (&PllLockTime);
+ TransAndBusMastLatency += PllLockTime;
+ }
+
+ *TransitionLatency = TransAndBusMastLatency;
+
+ return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to calculates the frequency in megahertz of the desired P-state.
+ *
+ * @param[in] PstateCpuServices Pstate CPU services.
+ * @param[in] StateNumber The P-State to analyze.
+ * @param[out] FrequencyInMHz The P-State's frequency in MegaHertz
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ */
+AGESA_STATUS
+F16KbGetPstateFrequency (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN UINT8 StateNumber,
+ OUT UINT32 *FrequencyInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 TempValue;
+ UINT32 CpuDid;
+ UINT32 CpuFid;
+ UINT64 LocalMsrRegister;
+ PCI_ADDR PciAddress;
+ HTC_REGISTER HtcReg;
+ CLK_PWR_TIMING_CTRL2_REGISTER ClkPwrTimingCtrl2;
+
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetPstateFrequency - P%d\n", StateNumber);
+
+ PciAddress.AddressValue = CPTC2_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &ClkPwrTimingCtrl2, StdHeader);
+
+ PciAddress.AddressValue = HTC_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &HtcReg, StdHeader);
+
+ ASSERT ((StateNumber <= ClkPwrTimingCtrl2.HwPstateMaxVal) || ((StateNumber == HtcReg.HtcPstateLimit)));
+
+ LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &LocalMsrRegister, StdHeader);
+
+ CpuDid = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->CpuDid);
+ CpuFid = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->CpuFid);
+
+ switch (CpuDid) {
+ case 0:
+ TempValue = 1;
+ break;
+ case 1:
+ TempValue = 2;
+ break;
+ case 2:
+ TempValue = 4;
+ break;
+ case 3:
+ TempValue = 8;
+ break;
+ case 4:
+ TempValue = 16;
+ break;
+ default:
+ // CpuDid is set to an undefined value. This is due to either a misfused CPU, or
+ // an invalid P-state MSR write.
+ ASSERT (FALSE);
+ TempValue = 1;
+ break;
+ }
+ *FrequencyInMHz = (100 * (CpuFid + 0x10) / TempValue);
+ IDS_HDT_CONSOLE (CPU_TRACE, " FrequencyInMHz=%d, CpuFid=%d, CpuDid=%d\n", *FrequencyInMHz, CpuFid, CpuDid);
+
+ return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to calculates the power in milliWatts of the desired P-state.
+ *
+ * @param[in] PstateCpuServices Pstate CPU services.
+ * @param[in] StateNumber Which P-state to analyze
+ * @param[out] PowerInMw The Power in milliWatts of that P-State
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F16KbGetPstatePower (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN UINT8 StateNumber,
+ OUT UINT32 *PowerInMw,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 CpuVid;
+ UINT32 IddValue;
+ UINT32 IddDiv;
+ UINT32 V_x100000;
+ UINT32 Power;
+ UINT64 LocalMsrRegister;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetPstatePower - P%d\n", StateNumber);
+
+ ASSERT (StateNumber < NM_PS_REG);
+ LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &LocalMsrRegister, StdHeader);
+ ASSERT (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1);
+ CpuVid = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->CpuVid);
+ IddValue = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->IddValue);
+ IddDiv = (UINT32) (((PSTATE_MSR *) &LocalMsrRegister)->IddDiv);
+
+ if (CpuVid >= 0xF8) {
+ V_x100000 = 0;
+ } else {
+ V_x100000 = 155000L - (625L * CpuVid);
+ }
+
+ Power = V_x100000 * IddValue;
+
+ switch (IddDiv) {
+ case 0:
+ *PowerInMw = Power / 100L;
+ break;
+ case 1:
+ *PowerInMw = Power / 1000L;
+ break;
+ case 2:
+ *PowerInMw = Power / 10000L;
+ break;
+ default:
+ // IddDiv is set to an undefined value. This is due to either a misfused CPU, or
+ // an invalid P-state MSR write.
+ ASSERT (FALSE);
+ *PowerInMw = 0;
+ break;
+ }
+ IDS_HDT_CONSOLE (CPU_TRACE, " PowerInMw=%d, CpuVid=%d, IddValue=%d, IddDiv=%d\n", *PowerInMw, CpuVid, IddValue, IddDiv);
+
+ return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to get CPU pstate max state.
+ *
+ * @param[in] PstateCpuServices Pstate CPU services.
+ * @param[out] MaxPStateNumber The max hw pstate value on the current socket.
+ * @param[out] NumberOfBoostStates The number of boosted P-states on the current socket.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F16KbGetPstateMaxState (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ OUT UINT32 *MaxPStateNumber,
+ OUT UINT8 *NumberOfBoostStates,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 NumBoostStates;
+ UINT64 MsrValue;
+ UINT32 LocalPciRegister;
+ PCI_ADDR PciAddress;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetPstateMaxState\n");
+
+ LocalPciRegister = 0;
+
+ // For F16 Kabini CPU, skip boosted p-state. The boosted p-state number = F4x15C[NumBoostStates].
+ PciAddress.AddressValue = CPB_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F4x15C
+
+ NumBoostStates = ((CPB_CTRL_REGISTER *) &LocalPciRegister)->NumBoostStates;
+ *NumberOfBoostStates = (UINT8) NumBoostStates;
+
+ //
+ // Read PstateMaxVal [6:4] from MSR C001_0061
+ // So, we will know the max pstate state in this socket.
+ //
+ LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &MsrValue, StdHeader);
+ *MaxPStateNumber = (UINT32) (((PSTATE_CURLIM_MSR *) &MsrValue)->PstateMaxVal) + NumBoostStates;
+ IDS_HDT_CONSOLE (CPU_TRACE, " MaxPStateNumber=%d, NumBoostStates=%d\n", *MaxPStateNumber, NumBoostStates);
+
+ return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to get CPU pstate register information.
+ *
+ * @param[in] PstateCpuServices Pstate CPU services.
+ * @param[in] PState Input Pstate number for query.
+ * @param[out] PStateEnabled Boolean flag return pstate enable.
+ * @param[in,out] IddVal Pstate current value.
+ * @param[in,out] IddDiv Pstate current divisor.
+ * @param[out] SwPstateNumber Software P-state number.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F16KbGetPstateRegisterInfo (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN UINT32 PState,
+ OUT BOOLEAN *PStateEnabled,
+ IN OUT UINT32 *IddVal,
+ IN OUT UINT32 *IddDiv,
+ OUT UINT32 *SwPstateNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 LocalPciRegister;
+ UINT64 LocalMsrRegister;
+ PCI_ADDR PciAddress;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetPstateRegisterInfo - P%d\n", PState);
+
+ ASSERT (PState < NM_PS_REG);
+
+ // For F16 Kabini CPU, skip boosted p-state. The boosted p-state number = F4x15C[NumBoostStates].
+ PciAddress.AddressValue = CPB_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); // F4x15C
+
+ // Read PSTATE MSRs
+ LibAmdMsrRead (PS_REG_BASE + (UINT32) PState, &LocalMsrRegister, StdHeader);
+
+ *SwPstateNumber = PState;
+
+ if (((PSTATE_MSR *) &LocalMsrRegister)->PsEnable == 1) {
+ // PState enable = bit 63
+ *PStateEnabled = TRUE;
+ //
+ // Check input pstate belongs to Boosted-Pstate, if yes, return *PStateEnabled = FALSE.
+ //
+ if (PState < ((CPB_CTRL_REGISTER *) &LocalPciRegister)->NumBoostStates) {
+ *PStateEnabled = FALSE;
+ } else {
+ *SwPstateNumber = PState - ((CPB_CTRL_REGISTER *) &LocalPciRegister)->NumBoostStates;
+ }
+ IDS_HDT_CONSOLE (CPU_TRACE, " Pstate %d is enabled. SwPstateNumber=%d\n", PState, *SwPstateNumber);
+ } else {
+ *PStateEnabled = FALSE;
+ }
+
+ // Bits 39:32 (high 32 bits [7:0])
+ *IddVal = (UINT32) ((PSTATE_MSR *) &LocalMsrRegister)->IddValue;
+ // Bits 41:40 (high 32 bits [9:8])
+ *IddDiv = (UINT32) ((PSTATE_MSR *) &LocalMsrRegister)->IddDiv;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " IddVal=%d, IddDiv=%d\n", *IddVal, *IddDiv);
+ return (AGESA_SUCCESS);
+}
+
+
+CONST PSTATE_CPU_FAMILY_SERVICES ROMDATA F16KbPstateServices =
+{
+ 0,
+ (PF_PSTATE_PSD_IS_NEEDED) CommonReturnTrue,
+ F16KbIsPstatePsdDependent,
+ F16KbGetPstateTransLatency,
+ F16KbGetPstateFrequency,
+ (PF_CPU_SET_PSTATE_LEVELING_REG) CommonReturnAgesaSuccess,
+ F16KbGetPstatePower,
+ F16KbGetPstateMaxState,
+ F16KbGetPstateRegisterInfo
+};
+
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ * F16KbGetPowerStepValueInTime
+ *
+ * Description:
+ * Convert power step value in time
+ *
+ * Parameters:
+ * @param[out] *PowerStepPtr
+ *
+ * @retval VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+STATIC
+F16KbGetPowerStepValueInTime (
+ IN OUT UINT32 *PowerStepPtr
+ )
+{
+ UINT32 TempVar_a;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetPowerStepValueInTime\n");
+
+ TempVar_a = *PowerStepPtr;
+
+ if (TempVar_a < 0x4) {
+ *PowerStepPtr = 400 - (TempVar_a * 100);
+ } else if (TempVar_a < 0x9) {
+ *PowerStepPtr = 130 - (TempVar_a * 10);
+ } else {
+ *PowerStepPtr = 90 - (TempVar_a * 5);
+ }
+ IDS_HDT_CONSOLE (CPU_TRACE, " PowerStepPtr=%d\n", *PowerStepPtr);
+}
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ * F16KbGetPllValueInTime
+ *
+ * Description:
+ * Convert PLL Value in time
+ *
+ * Parameters:
+ * @param[out] *PllLockTimePtr
+ *
+ * @retval VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+STATIC
+F16KbGetPllValueInTime (
+ IN OUT UINT32 *PllLockTimePtr
+ )
+{
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetPllValueInTime\n");
+
+ if (*PllLockTimePtr < 4) {
+ *PllLockTimePtr = *PllLockTimePtr + 1;
+ } else if (*PllLockTimePtr == 4) {
+ *PllLockTimePtr = 8;
+ } else if (*PllLockTimePtr == 5) {
+ *PllLockTimePtr = 16;
+ } else
+ *PllLockTimePtr = 0;
+ IDS_HDT_CONSOLE (CPU_TRACE, " PllLockTimePtr=%d\n", *PllLockTimePtr);
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbSharedMsrTable.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbSharedMsrTable.c
new file mode 100644
index 0000000..a953793
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbSharedMsrTable.c
@@ -0,0 +1,112 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini Shared MSR table with values as defined in BKDG
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 86705 $ @e \$Date: 2013-01-24 17:34:21 -0600 (Thu, 24 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBSHAREDMSRTABLE_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+// M S R T a b l e s
+// ----------------------
+
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F16KbSharedMsrRegisters[] =
+{
+ // When there's a entry, change the number of entries below from 0 to (sizeof (F16KbSharedMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS))
+ {0},
+};
+
+// Shared MSRs with Special Programming Requirements Table
+// ----------------------
+STATIC CONST FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_INITIALIZER ROMDATA F16KbSharedMsrWorkarounds[] =
+{
+ // When there's a entry, change the number of entries below from 0 to (sizeof (F16KbSharedMsrWorkarounds) / sizeof (TABLE_ENTRY_FIELDS))
+ {0},
+};
+
+
+CONST REGISTER_TABLE ROMDATA F16KbSharedMsrRegisterTable = {
+ ComputeUnitPrimary,
+ PERFORM_TP_AFTER_AP_LAUNCH,
+ 0,
+ //(sizeof (F16KbSharedMsrRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+ (TABLE_ENTRY_FIELDS *) &F16KbSharedMsrRegisters,
+};
+
+CONST REGISTER_TABLE ROMDATA F16KbSharedMsrWorkaroundTable = {
+ ComputeUnitPrimary,
+ PERFORM_TP_AFTER_AP_LAUNCH,
+ 0,
+ //(sizeof (F16KbSharedMsrWorkarounds) / sizeof (TABLE_ENTRY_FIELDS)),
+ (TABLE_ENTRY_FIELDS *) &F16KbSharedMsrWorkarounds,
+};
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbUtilities.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbUtilities.c
new file mode 100644
index 0000000..ed94e79
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbUtilities.c
@@ -0,0 +1,1015 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 models 00h - 0Fh Kabini specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 16h Kabini.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF16PowerMgmt.h"
+#include "F16KbPowerMgmt.h"
+#include "cpuEarlyInit.h"
+#include "GeneralServices.h"
+#include "F16KbUtilities.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X16_KB_F16KBUTILITIES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+F16KbNbPstateDisCore (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+F16KbGetNbFreqNumeratorInMHz (
+ IN UINT32 NbFid,
+ OUT UINT32 *FreqNumeratorInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+F16KbGetNbFreqDivisor (
+ IN UINT32 NbDid,
+ OUT UINT32 *FreqDivisor,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+STATIC
+F16KbCalculateNbFrequencyInMHz (
+ IN UINT32 NbFid,
+ IN UINT32 NbDid,
+ OUT UINT32 *FrequencyInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+F16KbCovertVidInuV (
+ IN UINT32 Vid,
+ OUT UINT32 *VoltageInuV,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+F16KbCmnGetIddDivisor (
+ IN UINT32 IddDiv,
+ OUT UINT32 *IddDivisor,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+F16KbCmnCalculateCurrentInmA (
+ IN UINT32 IddValue,
+ IN UINT32 IddDiv,
+ OUT UINT32 *CurrentInmA,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+F16KbSetDownCoreRegister (
+ IN CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices,
+ IN UINT32 *Socket,
+ IN UINT32 *Module,
+ IN UINT32 *LeveledCores,
+ IN CORE_LEVELING_TYPE CoreLevelMode,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get CPU pstate current.
+ *
+ * @CpuServiceMethod{::F_CPU_GET_IDD_MAX}.
+ *
+ * This function returns the ProcIddMax.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] Pstate The P-state to check.
+ * @param[out] ProcIddMax P-state current in mA.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval TRUE P-state is enabled
+ * @retval FALSE P-state is disabled
+ */
+BOOLEAN
+F16KbGetProcIddMax (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT8 Pstate,
+ OUT UINT32 *ProcIddMax,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 MsrAddress;
+ PSTATE_MSR PstateMsr;
+ BOOLEAN IsPstateEnabled;
+ PCI_ADDR PciAddress;
+ NB_CAPS_2_REGISTER NbCap2;
+ UINT32 ProcIddMaxPerCore;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetProcIddMax - P%d\n", Pstate);
+
+ IsPstateEnabled = FALSE;
+
+ MsrAddress = (UINT32) (Pstate + PS_REG_BASE);
+ ASSERT (MsrAddress <= PS_MAX_REG);
+
+ LibAmdMsrRead (MsrAddress, (UINT64 *) &PstateMsr, StdHeader);
+ F16KbCmnCalculateCurrentInmA ((UINT32) PstateMsr.IddValue, (UINT32) PstateMsr.IddDiv, &ProcIddMaxPerCore, StdHeader);
+ PciAddress.AddressValue = NB_CAPS_REG2_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbCap2, StdHeader);
+ *ProcIddMax = (UINT32) ProcIddMaxPerCore * (NbCap2.CmpCap + 1);
+ IDS_HDT_CONSOLE (CPU_TRACE, " Pstate %d ProcIddMax %d CmpCap %d\n", Pstate, *ProcIddMax, NbCap2.CmpCap);
+
+ if (PstateMsr.PsEnable == 1) {
+ IsPstateEnabled = TRUE;
+ }
+ return IsPstateEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set down core register on Kabini
+ *
+ * This function set F3x190 Downcore Control Register[5:0]
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] Socket Socket ID.
+ * @param[in] Module Module ID in socket.
+ * @param[in] LeveledCores Number of core.
+ * @param[in] CoreLevelMode Core level mode.
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @retval TRUE Down Core register is updated.
+ * @retval FALSE Down Core register is not updated.
+ */
+BOOLEAN
+F16KbSetDownCoreRegister (
+ IN CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices,
+ IN UINT32 *Socket,
+ IN UINT32 *Module,
+ IN UINT32 *LeveledCores,
+ IN CORE_LEVELING_TYPE CoreLevelMode,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 NumOfComputeUnit;
+ UINT8 CoresPerComputeUnit;
+ UINT32 LocalPciRegister;
+ UINT32 CoreDisableBits;
+ UINT32 TempVar32_a;
+ PCI_ADDR PciAddress;
+ BOOLEAN IsUpdated;
+ AGESA_STATUS AgesaStatus;
+
+ IsUpdated = FALSE;
+ CoreDisableBits = 0;
+ TempVar32_a = 1;
+ CoresPerComputeUnit = 1;
+
+ switch (CoreLevelMode) {
+ // There's no 'break' except 'case CORE_LEVEL_COMPUTE_UNIT'.
+ // It's for generating CoreDisableBits and CoresPerComputeUnit
+ case CORE_LEVEL_COMPUTE_UNIT_THREE:
+ TempVar32_a = TempVar32_a << 1;
+ CoresPerComputeUnit++;
+ case CORE_LEVEL_COMPUTE_UNIT_TWO:
+ TempVar32_a = TempVar32_a << 1;
+ CoresPerComputeUnit++;
+ case CORE_LEVEL_COMPUTE_UNIT:
+ TempVar32_a = (TempVar32_a << 1) - 1;
+ TempVar32_a = FOUR_CORE_COMPUTE_UNIT_BITMAP & (~TempVar32_a);
+ NumOfComputeUnit = (UINT8) ((*LeveledCores) / CoresPerComputeUnit);
+ for (CoreDisableBits = 0; NumOfComputeUnit > 0; NumOfComputeUnit--) {
+ CoreDisableBits <<= FOUR_CORE_COMPUTE_UNIT_BITWIDTH;
+ CoreDisableBits |= TempVar32_a;
+ }
+ break;
+ default:
+ TempVar32_a = *LeveledCores;
+ if (TempVar32_a == 1) {
+ CoreDisableBits = DOWNCORE_MASK_SINGLE;
+ } else {
+ CoreDisableBits = ALL_CORES_DISABLE_BITMAP;
+ TempVar32_a = ((1 << TempVar32_a) - 1);
+ CoreDisableBits &= ~TempVar32_a;
+ }
+ }
+
+ if (CoreDisableBits != 0) {
+ if (GetPciAddress (StdHeader, (UINT8) *Socket, (UINT8) *Module, &PciAddress, &AgesaStatus)) {
+ PciAddress.Address.Function = FUNC_5;
+ PciAddress.Address.Register = NORTH_BRIDGE_CAPABILITIES_2_REG;
+ LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+ LocalPciRegister = (LocalPciRegister & 0xFF) + 1;
+ LocalPciRegister = (1 << LocalPciRegister) - 1;
+ CoreDisableBits &= LocalPciRegister;
+
+ PciAddress.Address.Function = FUNC_3;
+ PciAddress.Address.Register = DOWNCORE_CTRL;
+ LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+ if ((LocalPciRegister | CoreDisableBits) != LocalPciRegister) {
+ LocalPciRegister |= CoreDisableBits;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+ IsUpdated = TRUE;
+ }
+ }
+ }
+
+ return IsUpdated;
+}
+
+
+CONST CPU_CORE_LEVELING_FAMILY_SERVICES ROMDATA F16KbCoreLeveling =
+{
+ 0,
+ F16KbSetDownCoreRegister
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determines the NB clock on the desired node.
+ *
+ * @CpuServiceMethod{::F_CPU_GET_NB_FREQ}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] FrequencyInMHz Northbridge clock frequency in MHz.
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @return AGESA_SUCCESS FrequencyInMHz is valid.
+ */
+AGESA_STATUS
+F16KbGetCurrentNbFrequency (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT UINT32 *FrequencyInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ NB_PSTATE_STS_REGISTER NbPstateStsReg;
+ PCI_ADDR PciAddress;
+ AGESA_STATUS ReturnCode;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetCurrentNbFrequency\n");
+
+ PciAddress.AddressValue = NB_PSTATE_STATUS_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPstateStsReg, StdHeader);
+ ReturnCode = F16KbCalculateNbFrequencyInMHz (
+ NbPstateStsReg.CurNbFid,
+ NbPstateStsReg.CurNbDid,
+ FrequencyInMHz,
+ StdHeader
+ );
+ return ReturnCode;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the node's minimum and maximum northbridge frequency.
+ *
+ * @CpuServiceMethod{::F_CPU_GET_MIN_MAX_NB_FREQ}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] PciAddress The segment, bus, and device numbers of the CPU in question.
+ * @param[out] MaxFreqInMHz The node's maximum northbridge frequency.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval AGESA_SUCCESS Northbridge frequency is valid
+ */
+AGESA_STATUS
+F16KbGetMinMaxNbFrequency (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PCI_ADDR *PciAddress,
+ OUT UINT32 *var3,
+ OUT UINT32 *MaxFreqInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ INT8 NbPsMaxVal;
+ UINT8 i;
+ UINT32 LocalPciRegister;
+ AGESA_STATUS AgesaStatus;
+
+ AgesaStatus = AGESA_ERROR;
+
+ // Obtain the max NB frequency on the node
+ PciAddress->Address.Function = FUNC_5;
+ PciAddress->Address.Register = NB_PSTATE_CTRL;
+ LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+ NbPsMaxVal = (INT8) ((NB_PSTATE_CTRL_REGISTER *) &LocalPciRegister)->NbPstateMaxVal;
+
+ // Starting from NB Pmax
+ for (i = 0; i <= NbPsMaxVal; i++) {
+ PciAddress->Address.Function = FUNC_5;
+ PciAddress->Address.Register = (NB_PSTATE_0 + (4 * i));
+ LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+
+ // Ensure that the NB Pstate is enabled
+ if (((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbPstateEn == 1) {
+ AgesaStatus = F16KbCalculateNbFrequencyInMHz (((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbFid,
+ ((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbDid,
+ MaxFreqInMHz,
+ StdHeader);
+ break;
+ }
+ }
+ // If all of NbPstates are disabled, get MaxFreqInMHz from CurNbPstate
+ if (i > NbPsMaxVal) {
+ PciAddress->Address.Register = NB_PSTATE_STATUS;
+ LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+ F16KbCalculateNbFrequencyInMHz (((NB_PSTATE_STS_REGISTER *) &LocalPciRegister)->CurNbFid,
+ ((NB_PSTATE_STS_REGISTER *) &LocalPciRegister)->CurNbDid,
+ MaxFreqInMHz,
+ StdHeader);
+ *var3 = *MaxFreqInMHz;
+ ASSERT (FALSE);
+ } else {
+ // If platform configuration disable NB P-states, return the NB P0 frequency
+ // as both the min and max frequency on the node.
+ if (PlatformConfig->PlatformProfile.PlatformPowerPolicy == Performance) {
+ *var3 = *MaxFreqInMHz;
+ } else {
+ PciAddress->Address.Function = FUNC_5;
+ PciAddress->Address.Register = NB_PSTATE_CTRL;
+ LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+ NbPsMaxVal = (INT8) ((NB_PSTATE_CTRL_REGISTER *) &LocalPciRegister)->NbPstateMaxVal;
+
+ // Obtain the min NB frequency on the node, starting from NB Pmin
+ for (; NbPsMaxVal >= 0; NbPsMaxVal--) {
+ PciAddress->Address.Function = FUNC_5;
+ PciAddress->Address.Register = (NB_PSTATE_0 + (4 * NbPsMaxVal));
+ LibAmdPciRead (AccessWidth32, *PciAddress, &LocalPciRegister, StdHeader);
+
+ // Ensure that the NB Pstate is enabled
+ if (((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbPstateEn == 1) {
+ AgesaStatus = F16KbCalculateNbFrequencyInMHz (((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbFid,
+ ((NB_PSTATE_REGISTER *) &LocalPciRegister)->NbDid,
+ var3,
+ StdHeader);
+ break;
+ }
+ }
+ }
+ }
+ IDS_OPTION_HOOK (IDS_NBPS_MIN_FREQ, var3, StdHeader);
+
+ return AgesaStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determines the NB clock on the desired node.
+ *
+ * @CpuServiceMethod{::F_CPU_GET_NB_PSTATE_INFO}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] PciAddress The segment, bus, and device numbers of the CPU in question.
+ * @param[in] NbPstate The NB P-state number to check.
+ * @param[out] FreqNumeratorInMHz The desired node's frequency numerator in megahertz.
+ * @param[out] FreqDivisor The desired node's frequency divisor.
+ * @param[out] VoltageInuV The desired node's voltage in microvolts.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval TRUE NbPstate is valid
+ * @retval FALSE NbPstate is disabled or invalid
+ */
+BOOLEAN
+F16KbGetNbPstateInfo (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PCI_ADDR *PciAddress,
+ IN UINT32 NbPstate,
+ OUT UINT32 *FreqNumeratorInMHz,
+ OUT UINT32 *FreqDivisor,
+ OUT UINT32 *VoltageInuV,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 NbVid;
+ BOOLEAN PstateIsValid;
+ NB_PSTATE_CTRL_REGISTER NbPstateCtrlReg;
+ NB_PSTATE_REGISTER NbPstateReg;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetNbPstateInfo - NB P%d\n", NbPstate);
+
+ ASSERT ((PciAddress->Address.Segment == 0) && (PciAddress->Address.Bus == 0) && (PciAddress->Address.Device == 0x18));
+
+ PstateIsValid = FALSE;
+
+ // If NB P1, P2, or P3 is requested, make sure that NB Pstate is enabled
+ if ((NbPstate == 0) || (FamilySpecificServices->IsNbPstateEnabled (FamilySpecificServices, PlatformConfig, StdHeader))) {
+ PciAddress->AddressValue = NB_PSTATE_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, *PciAddress, &NbPstateCtrlReg, StdHeader);
+
+ ASSERT ((NbPstate < NM_NB_PS_REG) && (NbPstateCtrlReg.NbPstateMaxVal < NM_NB_PS_REG));
+ if (NbPstate <= NbPstateCtrlReg.NbPstateMaxVal) {
+ PciAddress->Address.Register = (NB_PSTATE_0 + (sizeof (NB_PSTATE_REGISTER) * NbPstate));
+ LibAmdPciRead (AccessWidth32, *PciAddress, &NbPstateReg, StdHeader);
+ IDS_HDT_CONSOLE (CPU_TRACE, " En:%d Fid:%x Did:%x Vid:%x\n", NbPstateReg.NbPstateEn, NbPstateReg.NbFid, NbPstateReg.NbDid, GetF16KbNbVid (&NbPstateReg));
+
+ // Check if at least NB P0 is enabled.
+ ASSERT ((NbPstate == 0) ? (NbPstateReg.NbPstateEn == 1) : TRUE);
+ // Ensure that requested NbPstate is enabled
+ if (NbPstateReg.NbPstateEn == 1) {
+ F16KbGetNbFreqNumeratorInMHz (NbPstateReg.NbFid, FreqNumeratorInMHz, StdHeader);
+ F16KbGetNbFreqDivisor (NbPstateReg.NbDid, FreqDivisor, StdHeader);
+
+ NbVid = GetF16KbNbVid (&NbPstateReg);
+ F16KbCovertVidInuV (NbVid, VoltageInuV, StdHeader);
+ PstateIsValid = TRUE;
+ }
+ }
+ }
+ return PstateIsValid;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get NB pstate current.
+ *
+ * @CpuServiceMethod{::F_CPU_GET_NB_IDD_MAX}.
+ *
+ * This function returns the NbIddMax.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] NbPstate The NB P-state to check.
+ * @param[out] NbIddMax NB P-state current in mA.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval TRUE NB P-state is enabled, and NbIddMax is valid.
+ * @retval FALSE NB P-state is disabled
+ */
+BOOLEAN
+F16KbGetNbIddMax (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT8 NbPstate,
+ OUT UINT32 *NbIddMax,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BOOLEAN IsNbPsEnabled;
+ PCI_ADDR PciAddress;
+ NB_PSTATE_CTRL_REGISTER NbPstateCtrlReg;
+ NB_PSTATE_REGISTER NbPstateReg;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetNbIddMax - NB P%d\n", NbPstate);
+
+ IsNbPsEnabled = FALSE;
+
+ PciAddress.AddressValue = NB_PSTATE_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPstateCtrlReg, StdHeader);
+
+ ASSERT (NbPstate < NM_NB_PS_REG);
+ if (NbPstate <= NbPstateCtrlReg.NbPstateMaxVal) {
+ PciAddress.Address.Register = (NB_PSTATE_0 + (sizeof (NB_PSTATE_REGISTER) * NbPstate));
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPstateReg, StdHeader);
+
+ // Ensure that requested NbPstate is enabled
+ if (NbPstateReg.NbPstateEn == 1) {
+ F16KbCmnCalculateCurrentInmA (NbPstateReg.NbIddValue, NbPstateReg.NbIddDiv, NbIddMax, StdHeader);
+ IsNbPsEnabled = TRUE;
+ IDS_HDT_CONSOLE (CPU_TRACE, " NB Pstate %d is Valid. NbIddMax %d\n", NbPstate, *NbIddMax);
+ }
+ }
+ return IsNbPsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the number of physical cores of current processor.
+ *
+ * @CpuServiceMethod{::F_CPU_NUMBER_OF_PHYSICAL_CORES}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @return The number of physical cores.
+ */
+UINT8
+F16KbGetNumberOfPhysicalCores (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPUID_DATA CpuId;
+
+ //
+ //CPUID.80000008h.ECX.NC + 1, 000b = 1, 001b = 2, etc.
+ //
+ LibAmdCpuidRead (CPUID_LONG_MODE_ADDR, &CpuId, StdHeader);
+ return ((UINT8) ((CpuId.ECX_Reg & 0xff) + 1));
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Use the Mailbox Register to get the Ap Mailbox info for the current core.
+ *
+ * @CpuServiceMethod{::F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE}.
+ *
+ * Access the mailbox register used with this NB family. This is valid until the
+ * point that some init code initializes the mailbox register for its normal use.
+ * The Machine Check Misc (Thresholding) register is available as both a PCI config
+ * register and a MSR, so it can be used as a mailbox from HT to other functions.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] ApMailboxInfo The AP Mailbox info
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+F16KbGetApMailboxFromHardware (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT AP_MAILBOXES *ApMailboxInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ // For Family 16h Kabini, we will return socket 0, node 0, module 0, module type 0, and 0 for
+ // the system degree
+ ApMailboxInfo->ApMailInfo.Info = (UINT32) 0x00000000;
+ ApMailboxInfo->ApMailExtInfo.Info = (UINT32) 0x00000000;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get this AP's system core number from hardware.
+ *
+ * @CpuServiceMethod{::F_CPU_GET_AP_CORE_NUMBER}.
+ *
+ * Returns the system core number from the scratch MSR, where
+ * it was saved at heap initialization.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @return The AP's unique core number
+ */
+UINT32
+F16KbGetApCoreNumber (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPUID_DATA Cpuid;
+
+ LibAmdCpuidRead (0x1, &Cpuid, StdHeader);
+ return ((Cpuid.EBX_Reg >> 24) & 0xFF);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Is the Northbridge PState feature enabled?
+ *
+ * @CpuServiceMethod{::F_IS_NB_PSTATE_ENABLED}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval TRUE The NB PState feature is enabled.
+ * @retval FALSE The NB PState feature is not enabled.
+ */
+BOOLEAN
+F16KbIsNbPstateEnabled (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+ BOOLEAN NbPstatesSupported;
+ BOOLEAN SkipHwCfg;
+ NB_PSTATE_STS_REGISTER NbPstateSts;
+ NB_PSTATE_CTRL_REGISTER NbPstateCtrl;
+
+
+ PciAddress.AddressValue = NB_PSTATE_STATUS_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, (VOID *) &NbPstateSts, StdHeader);
+ if (NbPstateSts.NbPstateDis == 1) {
+ return FALSE;
+ }
+
+ SkipHwCfg = FALSE;
+ IDS_OPTION_HOOK (IDS_NBPSDIS_OVERRIDE, &SkipHwCfg, StdHeader);
+
+ // NbPstates is supported by default
+ NbPstatesSupported = TRUE;
+
+ // Get user options
+ if (!PlatformConfig->PlatformProfile.NbPstatesSupported) {
+ NbPstatesSupported = FALSE;
+ }
+
+ PciAddress.AddressValue = NB_PSTATE_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, (VOID *) &NbPstateCtrl, StdHeader);
+ if (((NbPstateCtrl.NbPstateMaxVal != 0) || SkipHwCfg) && (NbPstatesSupported)) {
+ return TRUE;
+ }
+ return FALSE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Disable NB P-state.
+ * - clear F5x1[6C:64]
+ * - clear F5x170[NbPstateMaxVal]
+ * - set F5x170[SwNbPstateLoDis]
+ * - clear MSRC001_00[6B:64][NbPstate]
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services
+ * @param[in] CpuEarlyParamsPtr Service Parameters
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ */
+VOID
+F16KbNbPstateDis (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 i;
+ UINT32 PciData;
+ UINT32 NbPsCtrl;
+ UINT32 NbPsCtrlOrg;
+ BOOLEAN SkipNbPsLoPart;
+ PCI_ADDR PciAddress;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbNbPstateDis\n");
+
+ // D18F5x170[30, NbPstateFidVidSbcEn] = 1
+ PciAddress.AddressValue = NB_PSTATE_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateFidVidSbcEn = 1;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+
+ // Check whether NB P-state is disabled
+ if (!FamilySpecificServices->IsNbPstateEnabled (FamilySpecificServices, &CpuEarlyParamsPtr->PlatformConfig, StdHeader)) {
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " NB Pstates disabled\n");
+
+ PciAddress.AddressValue = NB_PSTATE_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+ NbPsCtrlOrg = NbPsCtrl;
+
+ // If CurNbPstate is not NB P0, get the Pstate pointed to by CurNbPstate and copy it's value to NB P0 to P3 and clear NbPstateHi
+ PciAddress.Address.Register = NB_PSTATE_STATUS;
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+
+ SkipNbPsLoPart = FALSE;
+ if ((((NB_PSTATE_STS_REGISTER *) &PciData)->StartupNbPstate != ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateHi) &&
+ (((NB_PSTATE_STS_REGISTER *) &PciData)->StartupNbPstate != ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateLo)) {
+ SkipNbPsLoPart = TRUE;
+ }
+
+ if (((NB_PSTATE_STS_REGISTER *) &PciData)->CurNbPstate != 0) {
+ PciAddress.Address.Register = NB_PSTATE_0 + (((NB_PSTATE_STS_REGISTER *) &PciData)->CurNbPstate * 4);
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+
+ for (i = 1; i < NM_NB_PS_REG; i++) {
+ PciAddress.Address.Register = NB_PSTATE_0 + (i * 4);
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+ }
+
+ if (!SkipNbPsLoPart) {
+ // Program D18F5x170 to transition the NB P-state:
+ // 1) NbPstateLo = NbPstateMaxVal.
+ // 2) SwNbPstateLoDis = NbPstateDisOnP0 = NbPstateThreshold = 0.
+
+ PciAddress.Address.Register = NB_PSTATE_CTRL;
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateLo = ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateMaxVal;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->SwNbPstateLoDis = 0;
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateDisOnP0 = 0;
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateThreshold = 0;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+
+ // Wait for D18F5x174[CurNbPstate] to equal NbPstateLo.
+ PciAddress.Address.Register = NB_PSTATE_STATUS;
+ do {
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+ } while (((NB_PSTATE_STS_REGISTER *) &PciData)->CurNbPstate != ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateLo);
+ }
+ }
+
+ // Program D18F5x170 to force the NB P-state:
+ // 1) NbPstateHi = target NB P-state.
+ // 2) SwNbPstateLoDis = 1
+ // And clear F5x170[NbPstateMaxVal]
+ PciAddress.Address.Register = NB_PSTATE_CTRL;
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateHi = 0;
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->NbPstateMaxVal = 0;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+ ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrl)->SwNbPstateLoDis = 1;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &NbPsCtrl, StdHeader);
+
+ // Wait for D18F5x174[CurNbPstate] to equal the target NB P-state.
+ PciAddress.Address.Register = NB_PSTATE_STATUS;
+ do {
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+ } while (((NB_PSTATE_STS_REGISTER *) &PciData)->CurNbPstate != 0);
+
+ // Clear F5x1[6C:64]
+ PciData = 0x00000000;
+ for (i = 1; i < NM_NB_PS_REG; i++) {
+ PciAddress.Address.Register = NB_PSTATE_0 + (i * 4);
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+
+ }
+
+ // Clear MSRC001_00[6B:64][NbPstate] on cores
+ F16KbNbPstateDisCore (StdHeader);
+
+ // BIOS performs the following to release the NB P-state force:
+ // 1. Restore the initial D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0, NbPstateLo] values.
+ // 2. Restore the initial D18F5x170[NbPstateThreshold, NbPstateHi] values.
+ PciAddress.Address.Register = NB_PSTATE_CTRL;
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+ ((NB_PSTATE_CTRL_REGISTER *) &PciData)->NbPstateLo = 0;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+ ((NB_PSTATE_CTRL_REGISTER *) &PciData)->SwNbPstateLoDis = ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOrg)->SwNbPstateLoDis;
+ ((NB_PSTATE_CTRL_REGISTER *) &PciData)->NbPstateDisOnP0 = ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOrg)->NbPstateDisOnP0;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+
+ ((NB_PSTATE_CTRL_REGISTER *) &PciData)->NbPstateHi = 0;
+ ((NB_PSTATE_CTRL_REGISTER *) &PciData)->NbPstateMaxVal = 0;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+ ((NB_PSTATE_CTRL_REGISTER *) &PciData)->NbPstateThreshold = ((NB_PSTATE_CTRL_REGISTER *) &NbPsCtrlOrg)->NbPstateThreshold;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Disable NB P-state on core.
+ * - clear MSRC001_00[6B:64][NbPstate].
+ *
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ */
+VOID
+STATIC
+F16KbNbPstateDisCore (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 i;
+ UINT64 MsrData;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbNbPstateDisCore\n");
+
+ // Only one core per compute unit needs to clear NbPstate in P-state MSRs
+ if (IsCoreComputeUnitPrimary (FirstCoreIsComputeUnitPrimary, StdHeader)) {
+ for (i = MSR_PSTATE_0; i <= MSR_PSTATE_7; i++) {
+ LibAmdMsrRead (i, &MsrData, StdHeader);
+ ((PSTATE_MSR *) &MsrData)->NbPstate = 0;
+ LibAmdMsrWrite (i, &MsrData, StdHeader);
+ }
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get NB Frequency Numerator in MHz
+ *
+ * @param[in] NbFid NB Frequency ID to convert
+ * @param[out] FreqNumeratorInMHz The desire NB FID's frequency numerator in megahertz.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ */
+VOID
+STATIC
+F16KbGetNbFreqNumeratorInMHz (
+ IN UINT32 NbFid,
+ OUT UINT32 *FreqNumeratorInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetNbFreqNumeratorInMHz - NbFid=%d\n", NbFid);
+ *FreqNumeratorInMHz = (NbFid + 4) * 100;
+ IDS_HDT_CONSOLE (CPU_TRACE, " FreqNumeratorInMHz=%d\n", *FreqNumeratorInMHz);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get NB Frequency Divisor
+ *
+ * @param[in] NbDid NB Divisor ID to convert.
+ * @param[out] FreqDivisor The desire NB DID's frequency divisor.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ */
+VOID
+STATIC
+F16KbGetNbFreqDivisor (
+ IN UINT32 NbDid,
+ OUT UINT32 *FreqDivisor,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbGetNbFreqDivisor - NbDid=%d\n", NbDid);
+ *FreqDivisor = (1 << NbDid);
+ IDS_HDT_CONSOLE (CPU_TRACE, " FreqDivisor=%d\n", *FreqDivisor);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Calculate NB Frequency in MHz
+ *
+ * @param[in] NbFid NB Frequency ID to convert
+ * @param[in] NbDid NB Divisor ID to convert.
+ * @param[out] FrequencyInMHz The Northbridge clock frequency in megahertz.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @return AGESA_SUCCESS FrequencyInMHz is valid.
+ */
+AGESA_STATUS
+STATIC
+F16KbCalculateNbFrequencyInMHz (
+ IN UINT32 NbFid,
+ IN UINT32 NbDid,
+ OUT UINT32 *FrequencyInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 FreqNumeratorInMHz;
+ UINT32 FreqDivisor;
+ AGESA_STATUS ReturnStatus;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbCalculateNbFrequencyInMHz - NbFid=%x, NbDid=%x\n", NbFid, NbDid);
+
+ ReturnStatus = AGESA_SUCCESS;
+ F16KbGetNbFreqNumeratorInMHz (NbFid, &FreqNumeratorInMHz, StdHeader);
+ F16KbGetNbFreqDivisor (NbDid, &FreqDivisor, StdHeader);
+ *FrequencyInMHz = FreqNumeratorInMHz / FreqDivisor;
+ IDS_HDT_CONSOLE (CPU_TRACE, " FrequencyInMHz=%d\n", *FrequencyInMHz);
+
+ return ReturnStatus;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Convert VID to microvolts(uV)
+ *
+ * @param[in] Vid The voltage ID of SVI2 encoding to be converted.
+ * @param[out] VoltageInuV The voltage in microvolts.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ */
+VOID
+STATIC
+F16KbCovertVidInuV (
+ IN UINT32 Vid,
+ OUT UINT32 *VoltageInuV,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbCovertVidInuV\n");
+ // Maximum 1.55V, 6.25mV per stpe
+ *VoltageInuV = ConvertVidInuV(Vid);
+ IDS_HDT_CONSOLE (CPU_TRACE, " Vid=%x, VoltageInuV=%d\n", Vid, *VoltageInuV);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get Core/NB Idd Divisor
+ *
+ * @param[in] IddDiv Core/NB current divisor to convert.
+ * @param[out] IddDivisor The desire Core/NB current divisor.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+STATIC
+F16KbCmnGetIddDivisor (
+ IN UINT32 IddDiv,
+ OUT UINT32 *IddDivisor,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbCmnGetIddDivisor - IddDiv=%d\n", IddDiv);
+
+ switch (IddDiv) {
+ case 0:
+ *IddDivisor = 1000;
+ break;
+ case 1:
+ *IddDivisor = 100;
+ break;
+ case 2:
+ *IddDivisor = 10;
+ break;
+ default: // IddDiv = 3 is reserved. Use 10
+ *IddDivisor = 10;
+ ASSERT (FALSE);
+ break;
+ }
+ IDS_HDT_CONSOLE (CPU_TRACE, " IddDivisor=%d\n", *IddDivisor);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Calculate Core/NB current in mA
+ *
+ * @param[in] IddValue Core/NB current value.
+ * @param[in] IddDiv Core/NB current divisor.
+ * @param[out] CurrentInmA The Core/NB current in milliampere.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+STATIC
+F16KbCmnCalculateCurrentInmA (
+ IN UINT32 IddValue,
+ IN UINT32 IddDiv,
+ OUT UINT32 *CurrentInmA,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 IddDivisor;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " F16KbCmnCalculateCurrentInmA - IddValue=%x, IddDiv=%x\n", IddValue, IddDiv);
+
+ F16KbCmnGetIddDivisor (IddDiv, &IddDivisor, StdHeader);
+ *CurrentInmA = IddValue * IddDivisor;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " CurrentInmA=%d\n", *CurrentInmA);
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbUtilities.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbUtilities.h
new file mode 100644
index 0000000..4565cce
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/KB/F16KbUtilities.h
@@ -0,0 +1,152 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Kabini specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 16h Kabini.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16/KB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _F16_KB_UTILITES_H_
+#define _F16_KB_UTILITES_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+#define FOUR_CORE_COMPUTE_UNIT_BITMAP 0xF
+#define FOUR_CORE_COMPUTE_UNIT_BITWIDTH 0x4
+#define ALL_CORES_DISABLE_BITMAP 0xFFFFFFFFul
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+UINT8
+F16KbGetNumberOfPhysicalCores (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+F16KbGetApMailboxFromHardware (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT AP_MAILBOXES *ApMailboxInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+F16KbIsNbPstateEnabled (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+F16KbNbPstateDis (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+F16KbGetProcIddMax (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT8 Pstate,
+ OUT UINT32 *ProcIddMax,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+F16KbGetNbIddMax (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT8 NbPstate,
+ OUT UINT32 *NbIddMax,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+F16KbGetCurrentNbFrequency (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT UINT32 *FrequencyInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+F16KbGetMinMaxNbFrequency (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PCI_ADDR *PciAddress,
+ OUT UINT32 *var3,
+ OUT UINT32 *MaxFreqInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+F16KbGetNbPstateInfo (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PCI_ADDR *PciAddress,
+ IN UINT32 NbPstate,
+ OUT UINT32 *FreqNumeratorInMHz,
+ OUT UINT32 *FreqDivisor,
+ OUT UINT32 *VoltageInuV,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+F16KbGetApCoreNumber (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _F16_KB_UTILITES_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Apm.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Apm.c
new file mode 100644
index 0000000..2330f1830
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Apm.c
@@ -0,0 +1,124 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 APM Initialization
+ *
+ * Enables Application Power Management feature
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF16PowerMgmt.h"
+#include "CommonReturns.h"
+#include "cpuApm.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_CPUF16APM_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Entry point for enabling Application Power Management
+ *
+ * This function must be run after all P-State routines have been executed
+ *
+ * @param[in] ApmServices The current CPU's family services.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ *
+ */
+STATIC AGESA_STATUS
+F16InitializeApm (
+ IN APM_FAMILY_SERVICES *ApmServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ F16_CPB_CTRL_REGISTER CpbControl;
+ PCI_ADDR PciAddress;
+
+ PciAddress.AddressValue = CPB_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &CpbControl, StdHeader);
+ if (CpbControl.NumBoostStates == 0) {
+ CpbControl.ApmMasterEn = 0;
+ } else {
+ CpbControl.ApmMasterEn = 1;
+ }
+ LibAmdPciWrite (AccessWidth32, PciAddress, &CpbControl, StdHeader);
+ return AGESA_SUCCESS;
+}
+
+
+
+CONST APM_FAMILY_SERVICES ROMDATA F16ApmSupport =
+{
+ 0,
+ (PF_APM_IS_SUPPORTED) CommonReturnTrue,
+ F16InitializeApm
+};
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16BrandId.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16BrandId.c
new file mode 100644
index 0000000..444315a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16BrandId.c
@@ -0,0 +1,166 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BrandId related functions and structures.
+ *
+ * Contains code that provides CPU BrandId information
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuEarlyInit.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_CPUF16BRANDID_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define NAME_STRING_ADDRESS_PORT 0x194
+#define NAME_STRING_DATA_PORT 0x198
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/// FAM16_BRAND_STRING_MSR
+typedef struct _PROCESSOR_NAME_STRING {
+ UINT32 lo; ///< lower 32-bits of 64-bit value
+ UINT32 hi; ///< highest 32-bits of 64-bit value
+} PROCESSOR_NAME_STRING;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+F16SetBrandIdRegistersAtEarly (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+CONST CHAR8 ROMDATA str_Unprogrammed_Sample[48] = "AMD Unprogrammed Engineering Sample";
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set the Processor Name String register based on F5x194/198
+ *
+ * This function copies F5x198_x[B:0] to MSR_C001_00[35:30]
+ *
+ * @param[in] FamilyServices The current Family Specific Services.
+ * @param[in] EarlyParams Service parameters.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+F16SetBrandIdRegistersAtEarly (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 PciData;
+ UINT32 MsrIndex;
+ UINT64 MsrData;
+ UINT64 *MsrNameStringPtrPtr;
+ PCI_ADDR PciAddress;
+
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 24, FUNC_5, 0);
+ PciAddress.Address.Register = NAME_STRING_ADDRESS_PORT;
+ // check if D18F5x198_x0 is 00000000h.
+ PciData = 0;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+ PciAddress.Address.Register = NAME_STRING_DATA_PORT;
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+ if (PciData != 0) {
+ for (MsrIndex = 0; MsrIndex <= (MSR_CPUID_NAME_STRING5 - MSR_CPUID_NAME_STRING0); MsrIndex++) {
+ PciAddress.Address.Register = NAME_STRING_ADDRESS_PORT;
+ PciData = MsrIndex * 2;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+ PciAddress.Address.Register = NAME_STRING_DATA_PORT;
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+ ((PROCESSOR_NAME_STRING *) (&MsrData))->lo = PciData;
+
+ PciAddress.Address.Register = NAME_STRING_ADDRESS_PORT;
+ PciData = (MsrIndex * 2) + 1;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+ PciAddress.Address.Register = NAME_STRING_DATA_PORT;
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+ ((PROCESSOR_NAME_STRING *) (&MsrData))->hi = PciData;
+
+ LibAmdMsrWrite ((MsrIndex + MSR_CPUID_NAME_STRING0), &MsrData, StdHeader);
+ }
+ } else {
+ // It is unprogrammed (unfused) parts and use a name string of "AMD Unprogrammed Engineering Sample"
+ MsrNameStringPtrPtr = (UINT64 *) str_Unprogrammed_Sample;
+ // Put values into name MSRs, Always write the full 48 bytes
+ for (MsrIndex = MSR_CPUID_NAME_STRING0; MsrIndex <= MSR_CPUID_NAME_STRING5; MsrIndex++) {
+ LibAmdMsrWrite (MsrIndex, MsrNameStringPtrPtr, StdHeader);
+ MsrNameStringPtrPtr++;
+ }
+ }
+ return;
+}
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16CacheDefaults.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16CacheDefaults.c
new file mode 100644
index 0000000..b89daaa
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16CacheDefaults.c
@@ -0,0 +1,129 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 ROM Execution Cache Defaults
+ *
+ * Contains default values for ROM execution cache setup
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuCacheInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_CPUF16CACHEDEFAULTS_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF16CacheInfo (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **CacheInfoPtr,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+#define MEM_TRAINING_BUFFER_SIZE 16384
+#define VAR_MTRR_MASK 0x000000FFFFFFFFFFul
+
+#define HEAP_BASE_MASK 0x000000FFFFFFFFFFul
+
+#define SHARED_MEM_SIZE 0
+
+CONST CACHE_INFO ROMDATA CpuF16CacheInfo =
+{
+ BSP_STACK_SIZE_64K,
+ CORE0_STACK_SIZE,
+ CORE1_STACK_SIZE,
+ MEM_TRAINING_BUFFER_SIZE,
+ SHARED_MEM_SIZE,
+ VAR_MTRR_MASK,
+ VAR_MTRR_MASK,
+ HEAP_BASE_MASK,
+ InfiniteExe
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the family specific properties of the cache, and its usage.
+ *
+ * @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] CacheInfoPtr Points to the cache info properties on exit.
+ * @param[out] NumberOfElements Will be one to indicate one entry.
+ * @param[in] StdHeader Header for library and services.
+ *
+ */
+VOID
+GetF16CacheInfo (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **CacheInfoPtr,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *NumberOfElements = 1;
+ *CacheInfoPtr = &CpuF16CacheInfo;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Dmi.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Dmi.c
new file mode 100644
index 0000000..df81dcd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Dmi.c
@@ -0,0 +1,123 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD DMI Record Creation API, and related functions for Family 16h.
+ *
+ * Contains code that produce the DMI related information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "cpuLateInit.h"
+#include "cpuF16PowerMgmt.h"
+#include "cpuServices.h"
+#include "cpuF16Dmi.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_CPUF16DMI_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE PstateFamilyServiceTable;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * DmiF16GetMaxSpeed
+ *
+ * Get the Max Speed
+ *
+ * @param[in] StdHeader Standard Head Pointer
+ *
+ * @retval MaxSpeed - CPU Max Speed.
+ *
+ */
+UINT16
+DmiF16GetMaxSpeed (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 PP_FUSE_ARRAY_V2_fld36;
+ UINT32 P0Frequency;
+ UINT32 PciData;
+ PCI_ADDR PciAddress;
+ PSTATE_CPU_FAMILY_SERVICES *FamilyServices;
+
+ FamilyServices = NULL;
+ GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_4, 0x15C);
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+ PP_FUSE_ARRAY_V2_fld36 = (UINT8) ((PciData >> 2) & 7);
+
+ FamilyServices->GetPstateFrequency (FamilyServices, PP_FUSE_ARRAY_V2_fld36, &P0Frequency, StdHeader);
+ return ((UINT16) P0Frequency);
+}
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Dmi.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Dmi.h
new file mode 100644
index 0000000..c687c3b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Dmi.h
@@ -0,0 +1,76 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD DMI Record Creation API, and related functions for Family 16h.
+ *
+ * Contains code that produce the DMI related information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F16_DMI_H_
+#define _CPU_F16_DMI_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+UINT16
+DmiF16GetMaxSpeed (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _CPU_F16_DMI_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16MmioMap.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16MmioMap.c
new file mode 100644
index 0000000..cf1d0d8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16MmioMap.c
@@ -0,0 +1,473 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 MMIO map manager
+ *
+ * manage MMIO base/limit registers.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/F16
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "mmioMapManager.h"
+#include "cpuF16MmioMap.h"
+#include "S3SaveState.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_CPUF16MMIOMAP_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST UINT16 ROMDATA MmioBaseLowRegOffset[MMIO_REG_PAIR_NUM] = {0x80, 0x88, 0x90, 0x98, 0xA0, 0xA8, 0xB0, 0xB8, 0x1A0, 0x1A8, 0x1B0, 0x1B8};
+STATIC CONST UINT16 ROMDATA MmioLimitLowRegOffset[MMIO_REG_PAIR_NUM] = {0x84, 0x8C, 0x94, 0x9C, 0xA4, 0xAC, 0xB4, 0xBC, 0x1A4, 0x1AC, 0x1B4, 0x1BC};
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+#define F16_MMIO_ALIGN 0x10000l
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * BSC entry point for for adding MMIO map
+ *
+ * program MMIO base/limit registers
+ *
+ * @param[in] MmioMapServices MMIO map manager services.
+ * @param[in] AmdAddMmioParams Pointer to a data structure containing the parameter information.
+ *
+ * @retval AGESA_STATUS AGESA_ERROR - The requested range could not be added because there are not
+ * enough mapping resources.
+ * AGESA_BOUNDS_CHK - One or more input parameters are invalid. For example, the
+ * TargetAddress does not correspond to any device in the system.
+ * AGESA_SUCCESS - Adding MMIO map succeeds
+ */
+AGESA_STATUS
+STATIC
+cpuF16AddingMmioMap (
+ IN MMIO_MAP_FAMILY_SERVICES *MmioMapServices,
+ IN AMD_ADD_MMIO_PARAMS AmdAddMmioParams
+ )
+{
+ UINT8 i;
+ UINT8 j;
+ UINT8 UnusedMmioPair;
+ UINT8 Socket;
+ UINT8 Module;
+ UINT8 MmioPair;
+ AGESA_STATUS IgnoredSts;
+ PCI_ADDR PciAddress;
+ MMIO_BASE_LOW MmioBaseLow;
+ MMIO_LIMIT_LOW MmioLimitLow;
+ MMIO_RANGE MmioRange[MMIO_REG_PAIR_NUM];
+ MMIO_RANGE MmioRangeTemp;
+ MMIO_RANGE NewMmioRange;
+ MMIO_RANGE FragmentMmioRange;
+ BOOLEAN Overlap;
+ BOOLEAN NewMmioIncluded;
+
+ UnusedMmioPair = 0;
+ // FragmentMMioRange is used for record the MMIO range which is splitted by overriding.
+ FragmentMmioRange.Attribute.MmioReadableRange = 0;
+ FragmentMmioRange.Attribute.MmioWritableRange = 0;
+ FragmentMmioRange.Base = 0;
+ FragmentMmioRange.Limit = F16_MMIO_ALIGN;
+
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, FUNC_1, MmioBaseLowRegOffset[0]);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "MMIO map configuration before merging:\n");
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Base Limit NP RE WE Lock DstNode DstLink DstSubLink\n");
+ for (MmioPair = 0; MmioPair < MMIO_REG_PAIR_NUM; MmioPair++) {
+ // MMIO base low
+ PciAddress.Address.Register = MmioBaseLowRegOffset[MmioPair];
+ LibAmdPciRead (AccessWidth32, PciAddress, &MmioBaseLow, &(AmdAddMmioParams.StdHeader));
+ // MMIO limit low
+ PciAddress.Address.Register = MmioLimitLowRegOffset[MmioPair];
+ LibAmdPciRead (AccessWidth32, PciAddress, &MmioLimitLow, &(AmdAddMmioParams.StdHeader));
+ // get MMIO info
+ MmioRange[MmioPair].Base = (MmioBaseLow.MmioBase << 16);
+ MmioRange[MmioPair].Limit = (MmioLimitLow.MmioLimit << 16) + F16_MMIO_ALIGN;
+ MmioRange[MmioPair].Attribute.MmioPostedRange = (UINT8) MmioLimitLow.NP;
+ MmioRange[MmioPair].Attribute.MmioReadableRange = (UINT8) MmioBaseLow.RE;
+ MmioRange[MmioPair].Attribute.MmioWritableRange = (UINT8) MmioBaseLow.WE;
+ MmioRange[MmioPair].Attribute.MmioSecuredRange = (UINT8) MmioBaseLow.Lock;
+ MmioRange[MmioPair].Destination.DstNode = MmioLimitLow.DstNode;
+ MmioRange[MmioPair].Destination.DstLink = MmioLimitLow.DstLink;
+ MmioRange[MmioPair].Destination.DstSubLink = MmioLimitLow.DstSubLink;
+ MmioRange[MmioPair].RangeNum = MmioPair;
+ MmioRange[MmioPair].Modified = FALSE;
+ if ((MmioRange[MmioPair].Attribute.MmioReadableRange == 0) && (MmioRange[MmioPair].Attribute.MmioWritableRange == 0)) {
+ UnusedMmioPair++;
+ }
+ IDS_HDT_CONSOLE (MAIN_FLOW, " %02d ", MmioPair);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "%08x%08x %08x%08x", (MmioRange[MmioPair].Base >> 32) & 0xFFFFFFFF,
+ MmioRange[MmioPair].Base & 0xFFFFFFFF,
+ (MmioRange[MmioPair].Limit >> 32) & 0xFFFFFFFF,
+ MmioRange[MmioPair].Limit & 0xFFFFFFFF);
+ IDS_HDT_CONSOLE (MAIN_FLOW, " %s %s %s %s", MmioRange[MmioPair].Attribute.MmioPostedRange ? "Y" : "N",
+ MmioRange[MmioPair].Attribute.MmioReadableRange ? "Y" : "N",
+ MmioRange[MmioPair].Attribute.MmioWritableRange ? "Y" : "N",
+ MmioRange[MmioPair].Attribute.MmioSecuredRange ? "Y" : "N");
+ IDS_HDT_CONSOLE (MAIN_FLOW, " %02d %02d %02d\n", MmioRange[MmioPair].Destination.DstNode,
+ MmioRange[MmioPair].Destination.DstLink,
+ MmioRange[MmioPair].Destination.DstSubLink);
+ }
+
+ // parse requirement
+ NewMmioRange.Base = AmdAddMmioParams.BaseAddress;
+ NewMmioRange.Limit = AmdAddMmioParams.BaseAddress + AmdAddMmioParams.Length;
+ NewMmioRange.Attribute = AmdAddMmioParams.Attributes;
+ IDS_HDT_CONSOLE (MAIN_FLOW, "req %08x%08x %08x%08x\n", (NewMmioRange.Base >> 32) & 0xFFFFFFFF,
+ NewMmioRange.Base & 0xFFFFFFFF,
+ (NewMmioRange.Limit >> 32) & 0xFFFFFFFF,
+ NewMmioRange.Limit & 0xFFFFFFFF);
+
+
+ // sort by base address
+ // range0, range1, range2, non used, non used...
+ for (i = 0; i < (MMIO_REG_PAIR_NUM - 1); i++) {
+ for (j = 0; j < (MMIO_REG_PAIR_NUM - i - 1); j++) {
+ if (((MmioRange[j].Base > MmioRange[j + 1].Base) && ((MmioRange[j + 1].Attribute.MmioReadableRange != 0) || (MmioRange[j + 1].Attribute.MmioWritableRange != 0))) ||
+ (((MmioRange[j].Attribute.MmioReadableRange == 0) && (MmioRange[j].Attribute.MmioWritableRange == 0)) &&
+ ((MmioRange[j + 1].Attribute.MmioReadableRange != 0) || (MmioRange[j + 1].Attribute.MmioWritableRange != 0)))) {
+ MmioRangeTemp = MmioRange[j];
+ MmioRange[j] = MmioRange[j + 1];
+ MmioRange[j + 1] = MmioRangeTemp;
+ }
+ }
+ }
+
+ // merge the request to current setting
+ Overlap = FALSE;
+ NewMmioIncluded = FALSE;
+ for (MmioPair = 0; MmioPair < MMIO_REG_PAIR_NUM; MmioPair++) {
+ if (MmioRange[MmioPair].Attribute.MmioReadableRange != 0 || MmioRange[MmioPair].Attribute.MmioWritableRange != 0) {
+ if (((NewMmioRange.Base <= MmioRange[MmioPair].Base) && (NewMmioRange.Limit >= MmioRange[MmioPair].Base)) ||
+ ((MmioRange[MmioPair].Base <= NewMmioRange.Base) && (MmioRange[MmioPair].Limit > NewMmioRange.Base))) {
+ if ((NewMmioRange.Attribute.MmioPostedRange == MmioRange[MmioPair].Attribute.MmioPostedRange) &&
+ (NewMmioRange.Attribute.MmioReadableRange == MmioRange[MmioPair].Attribute.MmioReadableRange) &&
+ (NewMmioRange.Attribute.MmioWritableRange == MmioRange[MmioPair].Attribute.MmioWritableRange) &&
+ (NewMmioRange.Attribute.MmioSecuredRange == MmioRange[MmioPair].Attribute.MmioSecuredRange)) {
+
+// Original sorted MMIO register pair defined ranges:
+// ____________ ________ ____________
+// | | | | | |
+// base0 limit0 base1 limit1 base2 limit2
+// Requested MMIO range:
+// case 1:
+// ((NewMmioRange.Base <= MmioRange[MmioPair].Base) && (NewMmioRange.Limit >= MmioRange[MmioPair].Base))
+// __________
+// | |
+// new base new limit
+// ____________________
+// | |
+// new base new limit
+// case 2:
+// ((MmioRange[MmioPair].Base <= NewMmioRange.Base) && (MmioRange[MmioPair].Limit >= NewMmioRange.Base))
+// ____________
+// | |
+// new base new limit
+
+ MmioRange[MmioPair].Base = (MmioRange[MmioPair].Base <= NewMmioRange.Base) ? MmioRange[MmioPair].Base : NewMmioRange.Base;
+ MmioRange[MmioPair].Modified = TRUE;
+ for (i = 1; NewMmioRange.Limit >= MmioRange[MmioPair + i].Base; i++) {
+ if ((NewMmioRange.Attribute.MmioPostedRange == MmioRange[MmioPair + i].Attribute.MmioPostedRange) &&
+ (NewMmioRange.Attribute.MmioReadableRange == MmioRange[MmioPair + i].Attribute.MmioReadableRange) &&
+ (NewMmioRange.Attribute.MmioWritableRange == MmioRange[MmioPair + i].Attribute.MmioWritableRange) &&
+ (NewMmioRange.Attribute.MmioSecuredRange == MmioRange[MmioPair + i].Attribute.MmioSecuredRange)) {
+ MmioRange[MmioPair].Limit = MmioRange[MmioPair + i].Limit;
+ MmioRange[MmioPair + i].Base = 0;
+ MmioRange[MmioPair + i].Limit = F16_MMIO_ALIGN;
+ MmioRange[MmioPair + i].Attribute.MmioReadableRange = 0;
+ MmioRange[MmioPair + i].Attribute.MmioWritableRange = 0;
+ MmioRange[MmioPair + i].Modified = TRUE;
+ UnusedMmioPair++;
+ } else if (MmioRange[MmioPair + i].Attribute.MmioReadableRange != 0 || MmioRange[MmioPair + i].Attribute.MmioWritableRange != 0) {
+ // Overlapped MMIO regions with different attributes
+ MmioRange[MmioPair].Limit = (MmioRange[MmioPair].Limit >= NewMmioRange.Limit) ? MmioRange[MmioPair].Limit : NewMmioRange.Limit;
+ NewMmioIncluded = TRUE;
+ Overlap = TRUE;
+ break;
+ }
+ }
+ MmioRange[MmioPair].Limit = (MmioRange[MmioPair + i - 1].Limit >= NewMmioRange.Limit) ? MmioRange[MmioPair + i - 1].Limit : NewMmioRange.Limit;
+ break;
+ } else {
+ // Overlapped MMIO regions with different attributes
+ Overlap = TRUE;
+ break;
+ }
+ }
+ } else {
+
+// Original sorted MMIO register pair defined ranges:
+// ____________ ________ ____________
+// | | | | | |
+// base0 limit0 base1 limit1 base2 limit2
+// Requested MMIO range:
+// case 3:
+// No overlapping area with the original ranges
+// ____________
+// | |
+// new base new limit
+// ______________
+// | |
+// new base new limit
+
+ MmioRange[MmioPair].Base = NewMmioRange.Base;
+ MmioRange[MmioPair].Limit = NewMmioRange.Limit;
+ MmioRange[MmioPair].Attribute = NewMmioRange.Attribute;
+ MmioRange[MmioPair].Modified = TRUE;
+
+ break;
+ }
+ }
+
+ if (MmioPair == MMIO_REG_PAIR_NUM) {
+ IDS_HDT_CONSOLE (MAIN_FLOW, " [ERROR] Not enough MMIO register pairs to hold the request.\n");
+ return AGESA_ERROR;
+ }
+
+ if (Overlap) {
+ if (NewMmioRange.Attribute.OverrideExisting) {
+ // First loop, to see which existing MMIO range should be overrided
+ for (MmioPair = 0; MmioPair < MMIO_REG_PAIR_NUM; MmioPair++) {
+ if ((MmioRange[MmioPair].Modified == TRUE) || (NewMmioRange.Limit < MmioRange[MmioPair].Base) || (NewMmioRange.Base > MmioRange[MmioPair].Limit)) {
+ continue;
+ } else {
+ // There's an overlap between NewMmio and MmioRange[MmioPair]
+
+ // ____________________
+ // | |
+ // base0 limit0
+ // __________
+ // | |
+ // new base new limit
+ if ((NewMmioRange.Base >= MmioRange[MmioPair].Base) && (NewMmioRange.Limit <= MmioRange[MmioPair].Limit)) {
+ if ((MmioRange[MmioPair].Limit - NewMmioRange.Limit) >= F16_MMIO_ALIGN) {
+ FragmentMmioRange.Base = NewMmioRange.Limit;
+ FragmentMmioRange.Limit = MmioRange[MmioPair].Limit;
+ FragmentMmioRange.Attribute = MmioRange[MmioPair].Attribute;
+ FragmentMmioRange.Destination = MmioRange[MmioPair].Destination;
+ }
+ if ((NewMmioRange.Base - MmioRange[MmioPair].Base) < F16_MMIO_ALIGN) {
+ MmioRange[MmioPair].Attribute.MmioReadableRange = 0;
+ MmioRange[MmioPair].Attribute.MmioWritableRange = 0;
+ UnusedMmioPair++;
+ }
+ MmioRange[MmioPair].Limit = NewMmioRange.Base;
+ MmioRange[MmioPair].Modified = TRUE;
+ }
+ // ____________________
+ // | |
+ // base0 limit0
+ // ______________
+ // | |
+ // new base new limit
+ if ((NewMmioRange.Base < MmioRange[MmioPair].Base) && (NewMmioRange.Limit <= MmioRange[MmioPair].Limit) && (NewMmioRange.Limit > MmioRange[MmioPair].Base)) {
+ MmioRange[MmioPair].Base = NewMmioRange.Limit;
+ MmioRange[MmioPair].Modified = TRUE;
+ if ((MmioRange[MmioPair].Limit - NewMmioRange.Limit) < F16_MMIO_ALIGN) {
+ MmioRange[MmioPair].Attribute.MmioReadableRange = 0;
+ MmioRange[MmioPair].Attribute.MmioWritableRange = 0;
+ UnusedMmioPair++;
+ }
+ }
+ // ____________________
+ // | |
+ // base0 limit0
+ // ______________
+ // | |
+ // new base new limit
+ if ((NewMmioRange.Base >= MmioRange[MmioPair].Base) && (NewMmioRange.Base < MmioRange[MmioPair].Limit) && (NewMmioRange.Limit > MmioRange[MmioPair].Limit)) {
+ MmioRange[MmioPair].Limit = NewMmioRange.Base;
+ MmioRange[MmioPair].Modified = TRUE;
+ if ((NewMmioRange.Base - MmioRange[MmioPair].Base) < F16_MMIO_ALIGN) {
+ MmioRange[MmioPair].Attribute.MmioReadableRange = 0;
+ MmioRange[MmioPair].Attribute.MmioWritableRange = 0;
+ UnusedMmioPair++;
+ }
+ }
+ // _________
+ // | |
+ // base0 limit0
+ // ___________________
+ // | |
+ // new base new limit
+ if ((NewMmioRange.Base <= MmioRange[MmioPair].Base) && (NewMmioRange.Limit >= MmioRange[MmioPair].Limit)) {
+ MmioRange[MmioPair].Base = 0;
+ MmioRange[MmioPair].Limit = F16_MMIO_ALIGN;
+ MmioRange[MmioPair].Attribute.MmioReadableRange = 0;
+ MmioRange[MmioPair].Attribute.MmioWritableRange = 0;
+ MmioRange[MmioPair].Attribute.MmioPostedRange = 0;
+ MmioRange[MmioPair].Attribute.MmioSecuredRange = 0;
+ MmioRange[MmioPair].Modified = TRUE;
+ UnusedMmioPair++;
+ }
+ }
+ }
+ // Let's see if there's enough MMIO registers for NewMmioRange and FragmentMmioRange
+ if (!NewMmioIncluded) {
+ UnusedMmioPair--;
+ }
+ if ((FragmentMmioRange.Attribute.MmioReadableRange != 0) && (FragmentMmioRange.Attribute.MmioWritableRange != 0)) {
+ UnusedMmioPair--;
+ }
+
+ if ((UnusedMmioPair != 0) && (UnusedMmioPair <= MMIO_REG_PAIR_NUM)) {
+ // Set MMIO for NewMmioRange and FragmentMmioRange
+ for (MmioPair = 0; MmioPair < MMIO_REG_PAIR_NUM; MmioPair++) {
+ if ((MmioRange[MmioPair].Attribute.MmioReadableRange == 0) && (MmioRange[MmioPair].Attribute.MmioWritableRange == 0)) {
+ if (!NewMmioIncluded) {
+ MmioRange[MmioPair].Base = NewMmioRange.Base;
+ MmioRange[MmioPair].Limit = NewMmioRange.Limit;
+ MmioRange[MmioPair].Attribute = NewMmioRange.Attribute;
+ MmioRange[MmioPair].Modified = TRUE;
+ NewMmioIncluded = TRUE;
+ } else if ((FragmentMmioRange.Attribute.MmioReadableRange != 0) && (FragmentMmioRange.Attribute.MmioWritableRange != 0)) {
+ MmioRange[MmioPair].Base = FragmentMmioRange.Base;
+ MmioRange[MmioPair].Limit = FragmentMmioRange.Limit;
+ MmioRange[MmioPair].Attribute = FragmentMmioRange.Attribute;
+ MmioRange[MmioPair].Destination = FragmentMmioRange.Destination;
+ MmioRange[MmioPair].Modified = TRUE;
+ FragmentMmioRange.Attribute.MmioReadableRange = 0;
+ FragmentMmioRange.Attribute.MmioWritableRange = 0;
+ } else {
+ break;
+ }
+ }
+ }
+ } else {
+ // We don't have enough MMIO registers.
+ IDS_HDT_CONSOLE (MAIN_FLOW, " [ERROR] Not enough MMIO register pairs to hold the request.\n");
+ return AGESA_ERROR;
+ }
+ } else {
+ // Overlapped MMIO regions with different attributes
+ // and the caller doesn't want to override existing MMIO setting.
+ IDS_HDT_CONSOLE (MAIN_FLOW, " [ERROR] Overlapped MMIO regions with different attributes.\n");
+ return AGESA_ERROR;
+ }
+ }
+ // write back MMIO base/limit
+ IDS_HDT_CONSOLE (MAIN_FLOW, "MMIO map configuration after merging:\n");
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Base Limit NP RE WE Lock DstNode DstLink DstSubLink\n");
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ if (IsProcessorPresent (Socket, &(AmdAddMmioParams.StdHeader))) {
+ for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+ if (GetPciAddress (&(AmdAddMmioParams.StdHeader), Socket, Module, &PciAddress, &IgnoredSts)) {
+ PciAddress.Address.Function = FUNC_1;
+ for (MmioPair = 0; MmioPair < MMIO_REG_PAIR_NUM; MmioPair++) {
+ IDS_HDT_CONSOLE (MAIN_FLOW, " %02d ", MmioPair);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "%08x%08x %08x%08x", (MmioRange[MmioPair].Base >> 32) & 0xFFFFFFFF,
+ MmioRange[MmioPair].Base & 0xFFFFFFFF,
+ (MmioRange[MmioPair].Limit >> 32) & 0xFFFFFFFF,
+ MmioRange[MmioPair].Limit & 0xFFFFFFFF);
+ IDS_HDT_CONSOLE (MAIN_FLOW, " %s %s %s %s", MmioRange[MmioPair].Attribute.MmioPostedRange ? "Y" : "N",
+ MmioRange[MmioPair].Attribute.MmioReadableRange ? "Y" : "N",
+ MmioRange[MmioPair].Attribute.MmioWritableRange ? "Y" : "N",
+ MmioRange[MmioPair].Attribute.MmioSecuredRange ? "Y" : "N");
+ IDS_HDT_CONSOLE (MAIN_FLOW, " %02d %02d %02d\n", MmioRange[MmioPair].Destination.DstNode,
+ MmioRange[MmioPair].Destination.DstLink,
+ MmioRange[MmioPair].Destination.DstSubLink);
+ if (MmioRange[MmioPair].Modified) {
+ // MMIO base low
+ PciAddress.Address.Register = MmioBaseLowRegOffset[MmioRange[MmioPair].RangeNum];
+ LibAmdPciRead (AccessWidth32, PciAddress, &MmioBaseLow, &(AmdAddMmioParams.StdHeader));
+ if (MmioBaseLow.Lock == 1) {
+ IDS_HDT_CONSOLE (MAIN_FLOW, " [ERROR] MMIO register pair locked.\n");
+ return AGESA_ERROR;
+ }
+ // Disable RE/WE before changing the address range
+ MmioBaseLow.RE = 0;
+ MmioBaseLow.WE = 0;
+ S3_SAVE_PCI_WRITE (&(AmdAddMmioParams.StdHeader), PciAddress, AccessWidth32, &MmioBaseLow);
+ LibAmdPciWrite (AccessWidth32, PciAddress, &MmioBaseLow, &(AmdAddMmioParams.StdHeader));
+
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Reconfiguring offset %X\n", MmioBaseLowRegOffset[MmioRange[MmioPair].RangeNum]);
+ MmioBaseLow.MmioBase = (UINT32) (MmioRange[MmioPair].Base >> 16) & 0xFFFFFFul;
+ MmioBaseLow.RE = MmioRange[MmioPair].Attribute.MmioReadableRange;
+ MmioBaseLow.WE = MmioRange[MmioPair].Attribute.MmioWritableRange;
+ S3_SAVE_PCI_WRITE (&(AmdAddMmioParams.StdHeader), PciAddress, AccessWidth32, &MmioBaseLow);
+ LibAmdPciWrite (AccessWidth32, PciAddress, &MmioBaseLow, &(AmdAddMmioParams.StdHeader));
+
+ // MMIO limit low
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Reconfiguring offset %X\n", MmioLimitLowRegOffset[MmioRange[MmioPair].RangeNum]);
+ PciAddress.Address.Register = MmioLimitLowRegOffset[MmioRange[MmioPair].RangeNum];
+ LibAmdPciRead (AccessWidth32, PciAddress, &MmioLimitLow, &(AmdAddMmioParams.StdHeader));
+ MmioLimitLow.MmioLimit = (UINT32) ((MmioRange[MmioPair].Limit - 1) >> 16) & 0xFFFFFFul;
+ MmioLimitLow.NP = MmioRange[MmioPair].Attribute.MmioPostedRange;
+ MmioLimitLow.DstNode = MmioRange[MmioPair].Destination.DstNode;
+ MmioLimitLow.DstLink = MmioRange[MmioPair].Destination.DstLink;
+ MmioLimitLow.DstSubLink = MmioRange[MmioPair].Destination.DstSubLink;
+ S3_SAVE_PCI_WRITE (&(AmdAddMmioParams.StdHeader), PciAddress, AccessWidth32, &MmioLimitLow);
+ LibAmdPciWrite (AccessWidth32, PciAddress, &MmioLimitLow, &(AmdAddMmioParams.StdHeader));
+ }
+ }
+ }
+ }
+ }
+ }
+ return AGESA_SUCCESS;
+}
+
+CONST MMIO_MAP_FAMILY_SERVICES ROMDATA F16MmioMapSupport =
+{
+ 0,
+ cpuF16AddingMmioMap
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16MmioMap.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16MmioMap.h
new file mode 100644
index 0000000..d202dfb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16MmioMap.h
@@ -0,0 +1,90 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 MMIO map manager
+ *
+ * manage MMIO base/limit registers.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F16_MMIO_MAP_H_
+#define _CPU_F16_MMIO_MAP_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+#define MMIO_REG_PAIR_NUM 12
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+/// MMIO base low
+typedef struct {
+ UINT32 RE:1; ///< Read enable
+ UINT32 WE:1; ///< Write enable
+ UINT32 :1; ///< Reserved
+ UINT32 Lock:1; ///< Lock
+ UINT32 :4; ///< Reserved
+ UINT32 MmioBase:24; ///< MMIO base address register bits[39:16]
+} MMIO_BASE_LOW;
+
+/// MMIO limit low
+typedef struct {
+ UINT32 DstNode:3; ///< Destination node ID bits
+ UINT32 :1; ///< Reserved
+ UINT32 DstLink:2; ///< Destination link ID
+ UINT32 DstSubLink:1; ///< Destination sublink
+ UINT32 NP:1; ///< Non-posted
+ UINT32 MmioLimit:24; ///< MMIO limit address register bits[39:16]
+} MMIO_LIMIT_LOW;
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+#endif // _CPU_F16_MMIO_MAP_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16MsrUnknownTables.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16MsrUnknownTables.c
new file mode 100644
index 0000000..5299228
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16MsrUnknownTables.c
@@ -0,0 +1,104 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 MSR tables for unknown processor
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 85962 $ @e \$Date: 2013-01-14 20:12:29 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_CPUF16MSRUNKNOWNTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+STATIC CONST MSR_TYPE_ENTRY_INITIALIZER ROMDATA F16MsrUnknownRegisters[] =
+{
+// M S R T a b l e s
+// ----------------------
+
+// MSR_NB_CFG1 (C001001F)
+// bits[54] InitApicIdCpuIdLo = 0x1
+ {
+ MsrRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MSR_NB_CFG, // Address
+ 0x0040000000000000, // RegData
+ 0x0040000000000000, // RegMask
+ }}
+ },
+};
+
+CONST REGISTER_TABLE ROMDATA F16MsrUnknownRegisterTable = {
+ AllCores,
+ PERFORM_TP_BEFORE_AP_LAUNCH,
+ (sizeof (F16MsrUnknownRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+ (TABLE_ENTRY_FIELDS *)F16MsrUnknownRegisters,
+};
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16PciUnknownTables.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16PciUnknownTables.c
new file mode 100644
index 0000000..f4bd703
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16PciUnknownTables.c
@@ -0,0 +1,250 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 PCI tables for unknown processor
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 85962 $ @e \$Date: 2013-01-14 20:12:29 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Table.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_CPUF16PCIUNKNOWNTABLES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+// P C I T a b l e s
+// ----------------------
+
+STATIC CONST TABLE_ENTRY_FIELDS ROMDATA F16PciUnknownRegisters[] =
+{
+// D18F0x68 - Link Transaction Control
+// bits[22:21] DsNpReqLmt = 0x2
+// bits[19] ApicExtSpur = 0x1
+// bits[18] ApicExtId = 0x1
+// bits[17] ApicExtBrdCst = 0x1
+// bits[15] LimitCldtCfg = 0x1
+// bits[11] RespPassPW = 0x1
+// bits[10] DisFillP = 0x0
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x68), // Address
+ 0x004E8800, // RegData
+ 0x006E8C00, // RegMask
+ }}
+ },
+// D18F0x6C - Link Initialization Control
+// bits[0] RouteTblDis = 0x0
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x6C), // Address
+ 0x00000000, // RegData
+ 0x00000001, // RegMask
+ }}
+ },
+// D18F0x90 - Upstream Base Channel Buffer Count
+// bits[27:25] FreeData = 0x0
+// bits[24:20] FreeCmd = 0x0
+// bits[19:18] RspData = 0x1
+// bits[17:16] NpReqData = 0x1
+// bits[15:12] ProbeCmd = 0x0
+// bits[11:8] RspCmd = 0x2
+// bits[7:5] PReq = 0x5
+// bits[4:0] NpReqCmd = 0x8
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x90), // Address
+ 0x000502A8, // RegData
+ 0x0FFFFFFF, // RegMask
+ }}
+ },
+// D18F0x94 - Link Isochronous Channel Buffer Count
+// bits[28:27] IsocRspData = 0x0
+// bits[26:25] IsocNpReqData = 0x1
+// bits[24:22] IsocRspCmd = 0x0
+// bits[21:19] IsocPReq = 0x0
+// bits[18:16] IsocNpReqCmd = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_0, 0x94), // Address
+ 0x02010000, // RegData
+ 0x1FFF0000, // RegMask
+ }}
+ },
+// D18F3x6C - Data Buffer Count
+// bits[30:28] IsocRspDBC = 0x1
+// bits[18:16] UpRspDBC = 0x1
+// bits[7:6] DnRspDBC = 0x1
+// bits[5:4] DnReqDBC = 0x1
+// bits[2:0] UpReqDBC = 0x2
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x6C), // Address
+ 0x10010052, // RegData
+ 0x700700F7, // RegMask
+ }}
+ },
+// D18F3xA0 - Power Control Miscellaneous
+// bits[13:11] PllLockTime = 0x1
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA0), // Address
+ 0x00000800, // RegData
+ 0x00003800, // RegMask
+ }}
+ },
+// D18F3xA4 - Reported Temperature Control
+// bits[20] TcenPwrDnCc6En = 0x1
+// bits[12:8] PerStepTimeDn = 0xF
+// bits[7] TmpSlewDnEn = 0x1
+// bits[6:5] TmpMaxDiffUp = 0x3
+// bits[4:0] PerStepTimeUp = 0xF
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0xA4), // Address
+ 0x00100FEF, // RegData
+ 0x00101FFF, // RegMask
+ }}
+ },
+// D18F3x1CC - IBS Control
+// bits[8] LvtOffsetVal = 0x1
+// bits[3:0] LvtOffset = 0x0
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_3, 0x1CC), // Address
+ 0x00000100, // RegData
+ 0x0000010F, // RegMask
+ }}
+ },
+// D18F4x15C - Core Performance Boost Control
+// bits[1:0] BoostSrc = 0
+ {
+ PciRegister,
+ {
+ AMD_FAMILY_16, // CpuFamily
+ AMD_F16_ALL // CpuRevision
+ },
+ {AMD_PF_ALL}, // PlatformFeatures
+ {{
+ MAKE_SBDFO (0, 0, 24, FUNC_4, 0x15C), // Address
+ 0x00000000, // RegData
+ 0x00000003, // RegMask
+ }}
+ },
+};
+
+CONST REGISTER_TABLE ROMDATA F16PciUnknownRegisterTable = {
+ PrimaryCores,
+ PERFORM_TP_BEFORE_AP_LAUNCH,
+ (sizeof (F16PciUnknownRegisters) / sizeof (TABLE_ENTRY_FIELDS)),
+ F16PciUnknownRegisters,
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16PowerMgmt.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16PowerMgmt.h
new file mode 100644
index 0000000..72ca5b8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16PowerMgmt.h
@@ -0,0 +1,294 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 Power Management related registers defination
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPUF16POWERMGMT_H_
+#define _CPUF16POWERMGMT_H_
+
+/*
+ * Family 16h CPU Power Management MSR definitions
+ *
+ */
+
+
+/* Last Branch From IP Register 0x000001DB */
+#define MSR_BR_FROM 0x000001DBul
+
+/* P-state Current Limit Register 0xC0010061 */
+#define MSR_PSTATE_CURRENT_LIMIT 0xC0010061ul // F16 Shared
+
+/// Pstate Current Limit MSR Register
+typedef struct {
+ UINT64 CurPstateLimit:3; ///< Current Pstate Limit
+ UINT64 :1; ///< Reserved
+ UINT64 PstateMaxVal:3; ///< Pstate Max Value
+ UINT64 :57; ///< Reserved
+} PSTATE_CURLIM_MSR;
+
+
+/* P-state Control Register 0xC0010062 */
+#define MSR_PSTATE_CTL 0xC0010062ul // F16 Shared
+
+/// Pstate Control MSR Register
+typedef struct {
+ UINT64 PstateCmd:3; ///< Pstate change command
+ UINT64 :61; ///< Reserved
+} PSTATE_CTRL_MSR;
+
+
+/* P-state Status Register 0xC0010063 */
+#define MSR_PSTATE_STS 0xC0010063ul
+
+/// Pstate Status MSR Register
+typedef struct {
+ UINT64 CurPstate:3; ///< Current Pstate
+ UINT64 :61; ///< Reserved
+} PSTATE_STS_MSR;
+
+
+/* P-state Registers 0xC001006[B:4] */
+#define MSR_PSTATE_0 0xC0010064ul
+#define MSR_PSTATE_1 0xC0010065ul
+#define MSR_PSTATE_2 0xC0010066ul
+#define MSR_PSTATE_3 0xC0010067ul
+#define MSR_PSTATE_4 0xC0010068ul
+#define MSR_PSTATE_5 0xC0010069ul
+#define MSR_PSTATE_6 0xC001006Aul
+#define MSR_PSTATE_7 0xC001006Bul
+
+#define PS_REG_BASE MSR_PSTATE_0 /* P-state Register base */
+#define PS_MAX_REG MSR_PSTATE_7 /* Maximum P-State Register */
+#define PS_MIN_REG MSR_PSTATE_0 /* Minimum P-State Register */
+#define NM_PS_REG 8 /* number of P-state MSR registers */
+
+/// P-state MSR with common field
+typedef struct {
+ UINT64 :63; ///< CpuFid
+ UINT64 PsEnable:1; ///< Pstate Enable
+} F16_PSTATE_MSR;
+
+
+/* C-state Address Register 0xC0010073 */
+#define MSR_CSTATE_ADDRESS 0xC0010073ul
+
+/// C-state Address MSR Register
+typedef struct {
+ UINT64 CstateAddr:16; ///< C-state address
+ UINT64 :48; ///< Reserved
+} CSTATE_ADDRESS_MSR;
+
+
+/*
+ * Family 16h CPU Power Management PCI definitions
+ *
+ */
+
+/* Extended Memory Controller Configuration Low Register F2x1B0 */
+#define EXT_MEMCTRL_CFG_LOW_REG 0x1B0
+
+/// Extended Memory Controller Configuration Low PCI Register
+typedef struct {
+ UINT32 AdapPrefMissRatio:2; ///< Adaptive prefetch miss ratio
+ UINT32 AdapPrefPositiveStep:2; ///< Adaptive prefetch positive step
+ UINT32 AdapPrefNegativeStep:2; ///< Adaptive prefetch negative step
+ UINT32 :2; ///< Reserved
+ UINT32 CohPrefPrbLmt:3; ///< Coherent prefetch probe limit
+ UINT32 DisIoCohPref:1; ///< Disable coherent prefetched for IO
+ UINT32 EnSplitDctLimits:1; ///< Split DCT write limits enable
+ UINT32 :7; ///< Reserved
+ UINT32 DblPrefEn:1; ///< Double prefetch enable
+ UINT32 :1; ///< Reserved
+ UINT32 PrefFourConf:3; ///< Prefetch four-ahead confidence
+ UINT32 PrefFiveConf:3; ///< Prefetch five-ahead confidence
+ UINT32 DcqBwThrotWm:4; ///< Dcq bandwidth throttle watermark
+} EXT_MEMCTRL_CFG_LOW_REGISTER;
+
+
+/* Hardware thermal control register F3x64 */
+#define HTC_REG 0x64
+#define HTC_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, HTC_REG))
+
+/// Hardware Thermal Control PCI Register
+typedef struct {
+ UINT32 HtcEn:1; ///< HTC Enable
+ UINT32 :3; ///< Reserved
+ UINT32 HtcAct:1; ///< HTC Active State
+ UINT32 HtcActSts:1; ///< HTC Active Status
+ UINT32 PslApicHiEn:1; ///< P-state limit higher APIC interrupt enable
+ UINT32 PslApicLoEn:1; ///< P-state limit lower APIC interrupt enable
+ UINT32 :8; ///< Reserved
+ UINT32 HtcTmpLmt:7; ///< HTC temperature limit
+ UINT32 HtcSlewSel:1; ///< HTC slew-controlled temp select
+ UINT32 HtcHystLmt:4; ///< HTC hysteresis
+ UINT32 HtcPstateLimit:3; ///< HTC P-state limit select
+ UINT32 :1; ///< Reserved
+} HTC_REGISTER;
+
+
+/* Software P-state limit register F3x68 */
+#define SW_PS_LIMIT_REG 0x68
+
+/// Software P-state Limit PCI Register
+typedef struct {
+ UINT32 :5; ///< Reserved
+ UINT32 SwPstateLimitEn:1; ///< Software P-state limit enable
+ UINT32 :22; ///< Reserved
+ UINT32 SwPstateLimit:3; ///< HTC P-state limit select
+ UINT32 :1; ///< Reserved
+} SW_PS_LIMIT_REGISTER;
+
+/* ACPI Power State Control Registers F3x84:80 */
+
+/// System Management Action Field (SMAF) Register
+typedef struct {
+ UINT8 CpuPrbEn:1; ///< CPU direct probe enable
+ UINT8 NbLowPwrEn:1; ///< Northbridge low-power enable
+ UINT8 NbGateEn:1; ///< Northbridge gate enable
+ UINT8 Reserved:2; ///< Reserved
+ UINT8 ClkDivisor:3; ///< Clock divisor
+} SMAF_REGISTER;
+
+/// union type for ACPI State SMAF setting
+typedef union {
+ UINT8 SMAFValue; ///< SMAF raw value
+ SMAF_REGISTER SMAF; ///< SMAF structure
+} ACPI_STATE_SMAF;
+
+/// ACPI Power State Control Register F3x80
+typedef struct {
+ ACPI_STATE_SMAF C2; ///< [7:0] SMAF Code 000b - C2
+ ACPI_STATE_SMAF C1eLinkInit; ///< [15:8] SMAF Code 001b - C1e or Link init
+ ACPI_STATE_SMAF SmafAct2; ///< [23:16] SMAF Code 010b
+ ACPI_STATE_SMAF S1; ///< [31:24] SMAF Code 011b - S1
+} ACPI_PSC_0_REGISTER;
+
+/// ACPI Power State Control Register F3x84
+typedef struct {
+ ACPI_STATE_SMAF S3; ///< [7:0] SMAF Code 100b - S3
+ ACPI_STATE_SMAF Throttling; ///< [15:8] SMAF Code 101b - Throttling
+ ACPI_STATE_SMAF S4S5; ///< [23:16] SMAF Code 110b - S4/S5
+ ACPI_STATE_SMAF C1; ///< [31:24] SMAF Code 111b - C1
+} ACPI_PSC_4_REGISTER;
+
+
+/* Popup P-state Register F3xA8 */
+#define POPUP_PSTATE_REG 0xA8
+#define POPUP_PSTATE_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, POPUP_PSTATE_REG))
+
+/// Popup P-state Register
+typedef struct {
+ UINT32 :29; ///< Reserved
+ UINT32 PopDownPstate:3; ///< PopDownPstate
+} POPUP_PSTATE_REGISTER;
+
+
+/* Clock Power/Timing Control 2 Register F3xDC */
+#define CPTC2_REG 0xDC
+#define CPTC2_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_3, CPTC2_REG))
+
+/// Clock Power Timing Control 2 PCI Register
+typedef struct {
+ UINT32 :8; ///< Reserved
+ UINT32 HwPstateMaxVal:3; ///< P-state maximum value
+ UINT32 :1; ///< Reserved
+ UINT32 NbsynPtrAdj:3; ///< NB/Core sync FIFO ptr adjust
+ UINT32 NbSynPtrAdjPstate_0:1; ///< NB/Core synchronization FIFO pointer adjust P-state[0]
+ UINT32 CacheFlushOnHaltCtl:3; ///< Cache flush on halt control
+ UINT32 CacheFlushOnHaltTmr:7; ///< Cache flush on halt timer
+ UINT32 IgnCpuPrbEn:1; ///< ignore CPU probe enable
+ UINT32 NbSynPtrAdjLo:3; ///< NB/core synchronization FIFO pointer adjust low
+ UINT32 NbsynPtrAdjPstate2_1:2; ///< NB/core synchronization FIFO pointer adjust P-state[2:1]
+} CLK_PWR_TIMING_CTRL2_REGISTER;
+
+
+/* Core Performance Boost Control Register D18F4x15C */
+#define CPB_CTRL_REG 0x15C
+#define CPB_CTRL_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_4, CPB_CTRL_REG))
+
+/// Core Performance Boost Control Register of Family 16h common aceess
+typedef struct {
+ UINT32 BoostSrc:2; ///< Boost source
+ UINT32 NumBoostStates:3; ///< Number of boosted states
+ UINT32 :2; ///< Reserved
+ UINT32 ApmMasterEn:1; ///< APM master enable
+ UINT32 CstatePowerEn:1; ///< C-state power enable
+ UINT32 :22; ///< Reserved
+ UINT32 BoostLock:1; ///< Boost source
+} F16_CPB_CTRL_REGISTER;
+
+
+#define NM_NB_PS_REG 4 /* Number of NB P-state registers */
+
+/* Northbridge P-state */
+#define NB_PSTATE_0 0x160
+#define NB_PSTATE_0_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_PSTATE_0))
+
+#define NB_PSTATE_1 0x164
+#define NB_PSTATE_1_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_PSTATE_1))
+
+#define NB_PSTATE_2 0x168
+#define NB_PSTATE_2_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_PSTATE_2))
+
+#define NB_PSTATE_3 0x16C
+#define NB_PSTATE_3_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, NB_PSTATE_3))
+
+
+/* Northbridge P-state Status */
+#define F16_NB_PSTATE_CTRL 0x170
+#define F16_NB_PSTATE_CTRL_PCI_ADDR (MAKE_SBDFO (0, 0, 0x18, FUNC_5, F16_NB_PSTATE_CTRL))
+
+/// Northbridge P-state Control Register
+typedef struct {
+ UINT32 NbPstateMaxVal:2; ///< NB P-state maximum value
+ UINT32 :1; ///< Reserved
+ UINT32 NbPstateLo:2; ///< NB P-state low
+ UINT32 :1; ///< Reserved
+ UINT32 NbPstateHi:2; ///< NB P-state high
+ UINT32 :1; ///< Reserved
+ UINT32 NbPstateThreshold:3; ///< NB P-state threshold
+ UINT32 :1; ///< Reserved
+ UINT32 NbPstateDisOnP0:1; ///< NB P-state disable on P0
+ UINT32 SwNbPstateLoDis:1; ///< Software NB P-state low disable
+ UINT32 :17; ///< Reserved
+} F16_NB_PSTATE_CTRL_REGISTER;
+
+
+#endif /* _CPUF16POWERMGMT_H */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Utilities.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Utilities.c
new file mode 100644
index 0000000..8774824
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Utilities.c
@@ -0,0 +1,417 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 16h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "cpuF16PowerMgmt.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuF16Utilities.h"
+#include "cpuEarlyInit.h"
+#include "cpuPostInit.h"
+#include "cpuFeatures.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FAMILY_0X16_CPUF16UTILITIES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern CPU_FAMILY_SUPPORT_TABLE PstateFamilyServiceTable;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Disables the desired P-state.
+ *
+ * @CpuServiceMethod{::F_CPU_DISABLE_PSTATE}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StateNumber The P-State to disable.
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+F16DisablePstate (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT8 StateNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 LocalMsrRegister;
+
+ ASSERT (StateNumber < NM_PS_REG);
+ LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &LocalMsrRegister, StdHeader);
+ ((F16_PSTATE_MSR *) &LocalMsrRegister)->PsEnable = 0;
+ LibAmdMsrWrite (PS_REG_BASE + (UINT32) StateNumber, &LocalMsrRegister, StdHeader);
+ return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Transitions the executing core to the desired P-state.
+ *
+ * @CpuServiceMethod{::F_CPU_TRANSITION_PSTATE}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StateNumber The new P-State to make effective.
+ * @param[in] WaitForTransition True if the caller wants the transition completed upon return.
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval AGESA_SUCCESS Always Succeeds
+ */
+AGESA_STATUS
+F16TransitionPstate (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT8 StateNumber,
+ IN BOOLEAN WaitForTransition,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 LocalMsrRegister;
+
+ LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &LocalMsrRegister, StdHeader);
+ ASSERT (((PSTATE_CURLIM_MSR *) &LocalMsrRegister)->PstateMaxVal >= StateNumber);
+ LibAmdMsrRead (MSR_PSTATE_CTL, &LocalMsrRegister, StdHeader);
+ ((PSTATE_CTRL_MSR *) &LocalMsrRegister)->PstateCmd = (UINT64) StateNumber;
+ LibAmdMsrWrite (MSR_PSTATE_CTL, &LocalMsrRegister, StdHeader);
+ if (WaitForTransition) {
+ do {
+ LibAmdMsrRead (MSR_PSTATE_STS, &LocalMsrRegister, StdHeader);
+ } while (((PSTATE_STS_MSR *) &LocalMsrRegister)->CurPstate != (UINT64) StateNumber);
+ }
+ return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determines the rate at which the executing core's time stamp counter is
+ * incrementing.
+ *
+ * @CpuServiceMethod{::F_CPU_GET_TSC_RATE}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] FrequencyInMHz TSC actual frequency.
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @return The most severe status of all called services
+ */
+AGESA_STATUS
+F16GetTscRate (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT UINT32 *FrequencyInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 NumBoostStates;
+ UINT32 LocalPciRegister;
+ UINT64 LocalMsrRegister;
+ PCI_ADDR PciAddress;
+ PSTATE_CPU_FAMILY_SERVICES *FamilyServices;
+
+ LibAmdMsrRead (0xC0010015, &LocalMsrRegister, StdHeader);
+ if ((LocalMsrRegister & 0x01000000) != 0) {
+ FamilyServices = NULL;
+ GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 24, FUNC_4, CPB_CTRL_REG);
+ LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+ NumBoostStates = (UINT8) ((F16_CPB_CTRL_REGISTER *) &LocalPciRegister)->NumBoostStates;
+ return (FamilyServices->GetPstateFrequency (FamilyServices, NumBoostStates, FrequencyInMHz, StdHeader));
+ } else {
+ return (FamilySpecificServices->GetCurrentNbFrequency (FamilySpecificServices, FrequencyInMHz, StdHeader));
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initially launches the desired core to run from the reset vector.
+ *
+ * @CpuServiceMethod{::F_CPU_AP_INITIAL_LAUNCH}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] SocketNum The Processor on which the core is to be launched
+ * @param[in] ModuleNum The Module in that processor containing that core
+ * @param[in] CoreNum The Core to launch
+ * @param[in] PrimaryCoreNum The id of the module's primary core.
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval TRUE The core was launched
+ * @retval FALSE The core was previously launched
+ */
+BOOLEAN
+F16LaunchApCore (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT32 SocketNum,
+ IN UINT32 ModuleNum,
+ IN UINT32 CoreNum,
+ IN UINT32 PrimaryCoreNum,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 NodeRelativeCoreNum;
+ UINT32 LocalPciRegister;
+ UINT32 LowCore;
+ UINT32 HighCore;
+ PCI_ADDR PciAddress;
+ BOOLEAN LaunchFlag;
+
+ NodeRelativeCoreNum = CoreNum - PrimaryCoreNum;
+ PciAddress.Address.Bus = 0;
+ PciAddress.Address.Device = 0x18;
+ PciAddress.Address.Function = FUNC_0;
+ PciAddress.Address.Register = CORE_CTRL;
+ LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+
+ GetGivenModuleCoreRange (0, 0, &LowCore, &HighCore, StdHeader);
+ ASSERT ((NodeRelativeCoreNum != 0) || (NodeRelativeCoreNum <= HighCore))
+
+ if ((LocalPciRegister & (1 << NodeRelativeCoreNum)) == 0) {
+ LocalPciRegister |= (1 << NodeRelativeCoreNum);
+ LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+ LaunchFlag = TRUE;
+ } else {
+ LaunchFlag = FALSE;
+ }
+
+ return (LaunchFlag);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns whether or not BIOS is responsible for configuring the NB COFVID.
+ *
+ * @CpuServiceMethod{::F_CPU_IS_NBCOF_INIT_NEEDED}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] PciAddress The northbridge to query by pci base address.
+ * @param[out] NbVidUpdateAll Do all NbVids need to be updated
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval TRUE Perform northbridge frequency and voltage config.
+ * @retval FALSE Do not configure them.
+ */
+BOOLEAN
+F16GetNbCofVidUpdate (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PCI_ADDR *PciAddress,
+ OUT BOOLEAN *NbVidUpdateAll,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *NbVidUpdateAll = FALSE;
+ return FALSE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Is the Northbridge PState feature enabled?
+ *
+ * @CpuServiceMethod{::F_IS_NB_PSTATE_ENABLED}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval TRUE The NB PState feature is enabled.
+ * @retval FALSE The NB PState feature is not enabled.
+ */
+BOOLEAN
+F16IsNbPstateEnabled (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 LocalPciRegister;
+ PCI_ADDR PciAddress;
+ BOOLEAN PowerMode;
+ BOOLEAN SkipHwCfg;
+
+ SkipHwCfg = FALSE;
+
+ IDS_OPTION_HOOK (IDS_NBPSDIS_OVERRIDE, &SkipHwCfg, StdHeader);
+
+ // Defaults to Power Optimized Mode
+ PowerMode = TRUE;
+
+ // If system is optimized for performance, disable NB P-States
+ if (PlatformConfig->PlatformProfile.PlatformPowerPolicy == Performance) {
+ PowerMode = FALSE;
+ }
+
+ PciAddress.AddressValue = F16_NB_PSTATE_CTRL_PCI_ADDR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader);
+ if ((((((F16_NB_PSTATE_CTRL_REGISTER *) &LocalPciRegister)->NbPstateMaxVal != 0) &&
+ (!IsNonCoherentHt1 (StdHeader))) || SkipHwCfg) && (PowerMode)) {
+ return TRUE;
+ }
+ return FALSE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set warm reset status and count
+ *
+ * @CpuServiceMethod{::F_CPU_SET_WARM_RESET_FLAG}.
+ *
+ * This function will use bit9, and bit 10 of register F0x6C as a warm reset status and count.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ * @param[in] Request Indicate warm reset status
+ *
+ */
+VOID
+F16SetAgesaWarmResetFlag (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN WARM_RESET_REQUEST *Request
+ )
+{
+ PCI_ADDR PciAddress;
+ UINT32 PciData;
+
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_0, HT_INIT_CTRL);
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+
+ // bit[5] - indicate a warm reset is or is not required
+ PciData &= ~(HT_INIT_BIOS_RST_DET_0);
+ PciData = PciData | (Request->RequestBit << 5);
+
+ // bit[10,9] - indicate warm reset status and count
+ PciData &= ~(HT_INIT_BIOS_RST_DET_1 | HT_INIT_BIOS_RST_DET_2);
+ PciData |= Request->StateBits << 9;
+
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get warm reset status and count
+ *
+ * @CpuServiceMethod{::F_CPU_GET_WARM_RESET_FLAG}.
+ *
+ * This function will bit9, and bit 10 of register F0x6C as a warm reset status and count.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StdHeader Config handle for library and services
+ * @param[out] Request Indicate warm reset status
+ *
+ */
+VOID
+F16GetAgesaWarmResetFlag (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT WARM_RESET_REQUEST *Request
+ )
+{
+ PCI_ADDR PciAddress;
+ UINT32 PciData;
+
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_0, HT_INIT_CTRL);
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader);
+
+ // bit[5] - indicate a warm reset is or is not required
+ Request->RequestBit = (UINT8) ((PciData & HT_INIT_BIOS_RST_DET_0) >> 5);
+ // bit[10,9] - indicate warm reset status and count
+ Request->StateBits = (UINT8) ((PciData & (HT_INIT_BIOS_RST_DET_1 | HT_INIT_BIOS_RST_DET_2)) >> 9);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Return a number zero or one, based on the Core ID position in the initial APIC Id.
+ *
+ * @CpuServiceMethod{::F_CORE_ID_POSITION_IN_INITIAL_APIC_ID}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval CoreIdPositionZero Core Id is not low
+ * @retval CoreIdPositionOne Core Id is low
+ */
+CORE_ID_POSITION
+F16CpuAmdCoreIdPositionInInitialApicId (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 InitApicIdCpuIdLo;
+
+ // Check bit_54 [InitApicIdCpuIdLo] to find core id position.
+ LibAmdMsrRead (MSR_NB_CFG, &InitApicIdCpuIdLo, StdHeader);
+ InitApicIdCpuIdLo = ((InitApicIdCpuIdLo & BIT54) >> 54);
+ return ((InitApicIdCpuIdLo == 0) ? CoreIdPositionZero : CoreIdPositionOne);
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Utilities.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Utilities.h
new file mode 100644
index 0000000..e635fb0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16Utilities.h
@@ -0,0 +1,144 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 specific utility functions.
+ *
+ * Provides numerous utility functions specific to family 16h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_F16_UTILITES_H_
+#define _CPU_F16_UTILITES_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+/// The structure for Software Initiated NB Voltage Transitions
+typedef struct {
+ UINT32 VidCode; ///< VID code to transition to
+ BOOLEAN SlamMode; ///< Whether voltage is to be slammed, or stepped
+} SW_VOLT_TRANS_NB;
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+F16DisablePstate (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT8 StateNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+F16TransitionPstate (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT8 StateNumber,
+ IN BOOLEAN WaitForTransition,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+F16GetTscRate (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT UINT32 *FrequencyInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+F16LaunchApCore (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT32 SocketNum,
+ IN UINT32 ModuleNum,
+ IN UINT32 CoreNum,
+ IN UINT32 PrimaryCoreNum,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+F16GetNbCofVidUpdate (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PCI_ADDR *PciAddress,
+ OUT BOOLEAN *NbVidUpdateAll,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+F16IsNbPstateEnabled (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+CORE_ID_POSITION
+F16CpuAmdCoreIdPositionInInitialApicId (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+F16SetAgesaWarmResetFlag (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN WARM_RESET_REQUEST *Request
+ );
+
+VOID
+F16GetAgesaWarmResetFlag (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT WARM_RESET_REQUEST *Request
+ );
+
+#endif // _CPU_F16_UTILITES_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16WheaInitDataTables.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16WheaInitDataTables.c
new file mode 100644
index 0000000..ab06fe1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/0x16/cpuF16WheaInitDataTables.c
@@ -0,0 +1,127 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Family_16 WHEA initial Data
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Family/0x16
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuLateInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FAMILY_0X16_CPUF16WHEAINITDATATABLES_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GetF16WheaInitData (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **F16WheaInitDataPtr,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AMD_HEST_BANK_INIT_DATA F16HestBankInitData[] = {
+ {0xFFFFFFFF,0xFFFFFFFF,0x400,0x401,0x402,0x403},
+ {0xFFFFFFFF,0xFFFFFFFF,0x404,0x405,0x406,0x407},
+ {0xFFFFFFFF,0xFFFFFFFF,0x408,0x409,0x40A,0x40B},
+ {0xFFFFFFFF,0xFFFFFFFF,0x410,0x411,0x412,0x413},
+ {0xFFFFFFFF,0xFFFFFFFF,0x414,0x415,0x416,0x417},
+ {0xFFFFFFFF,0xFFFFFFFF,0x418,0x419,0x41A,0x41B},
+};
+
+AMD_WHEA_INIT_DATA F16WheaInitData = {
+ 0x000000000, // AmdGlobCapInitDataLsd
+ 0x000000000, // AmdGlobCapInitDataMsd
+ 0x000000077, // AmdGlobCtrlInitDataLsd
+ 0x000000000, // AmdGlobCtrlInitDataMsd
+ 0x00, // AmdMcbClrStatusOnInit
+ 0x02, // AmdMcbStatusDataFormat
+ 0x00, // AmdMcbConfWriteEn
+ (sizeof (F16HestBankInitData) / sizeof (F16HestBankInitData[0])), // HestBankNum
+ &F16HestBankInitData[0] // Pointer to Initial data of HEST Bank
+};
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the family specific WHEA table properties.
+ *
+ * @CpuServiceMethod{::F_CPU_GET_FAMILY_SPECIFIC_ARRAY}.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] F16WheaInitDataPtr Points to the family 16h WHEA properties.
+ * @param[out] NumberOfElements Will be one to indicate one structure.
+ * @param[in] StdHeader Header for library and services.
+ *
+ */
+VOID
+GetF16WheaInitData (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **F16WheaInitDataPtr,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *NumberOfElements = 1;
+ *F16WheaInitDataPtr = &F16WheaInitData;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/cpuFamRegisters.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/cpuFamRegisters.h
new file mode 100644
index 0000000..cfd0dae
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Family/cpuFamRegisters.h
@@ -0,0 +1,125 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Register Table Related Functions
+ *
+ * Contains the definition of the CPU CPUID MSRs and PCI registers with BKDG recommended values
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_FAM_REGISTERS_H_
+#define _CPU_FAM_REGISTERS_H_
+
+/*
+ *--------------------------------------------------------------
+ *
+ * M O D U L E S U S E D
+ *
+ *---------------------------------------------------------------
+ */
+
+/*
+ *--------------------------------------------------------------
+ *
+ * D E F I N I T I O N S / M A C R O S
+ *
+ *---------------------------------------------------------------
+ */
+
+// This define should be equal to the total number of families
+// in the cpuFamily enum.
+#define MAX_CPU_FAMILIES 64
+#define MAX_CPU_REVISIONS 63 // Max Cpu Revisions Per Family
+
+// CPU_LOGICAL_ID.Family equates
+// Family 15h equates
+#define AMD_FAMILY_15_TN 0x0000000000000200ull
+#define AMD_FAMILY_TN (AMD_FAMILY_15_TN)
+#define AMD_FAMILY_15 (AMD_FAMILY_15_TN)
+
+// Family 16h equates
+#define AMD_FAMILY_16_KB 0x0000000000010000ull
+#define AMD_FAMILY_KB AMD_FAMILY_16_KB
+#define AMD_FAMILY_16 (AMD_FAMILY_KB)
+
+// Family Unknown
+#define AMD_FAMILY_UNKNOWN 0x8000000000000000ull
+
+
+// Family 15h CPU_LOGICAL_ID.Revision equates
+// -------------------------------------
+
+ // Family 15h TN steppings
+#define AMD_F15_TN_A0 0x0000000000000100ull
+#define AMD_F15_TN_A1 0x0000000000000200ull
+ // Family 15h Unknown stepping
+ // * This equate is used to ensure that unknown CPU revisions are *
+ // * identified as the last known revision of the silicon family: *
+ // * - Update AMD_F15_UNKNOWN whenever newer F15h steppings are added *
+#define AMD_F15_UNKNOWN (AMD_FAMILY_UNKNOWN | AMD_F15_TN_A1)
+
+
+#define AMD_F15_TN_Ax (AMD_F15_TN_A0 | AMD_F15_TN_A1)
+#define AMD_F15_TN_GT_A0 (AMD_F15_TN_ALL & ~AMD_F15_TN_A0)
+#define AMD_F15_TN_ONLY (AMD_F15_TN_Ax)
+#define AMD_F15_TN_ALL (AMD_F15_TN_Ax | AMD_F15_RL_ALL)
+
+
+#define AMD_F15_ALL (AMD_F15_TN_ALL)
+
+// Family 16h CPU_LOGICAL_ID.Revision equates
+// -------------------------------------
+
+ // Family 16h KB steppings
+#define AMD_F16_KB_A0 0x0000000000000001ull
+#define AMD_F16_KB_A1 0x0000000000000002ull
+ // Family 16h ML steppings
+ // Family 16h Unknown stepping
+ // * This equate is used to ensure that unknown CPU revisions are *
+ // * identified as the last known revision of the silicon family: *
+ // * - Update AMD_F16_UNKNOWN whenever newer F16h steppings are added *
+#define AMD_F16_UNKNOWN (AMD_FAMILY_UNKNOWN | AMD_F16_KB_A1)
+
+#define AMD_F16_KB_Ax (AMD_F16_KB_A0 | AMD_F16_KB_A1)
+#define AMD_F16_KB_ALL (AMD_F16_KB_Ax)
+
+
+#define AMD_F16_ALL (AMD_F16_KB_ALL)
+
+#endif // _CPU_FAM_REGISTERS_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/PreserveMailbox.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/PreserveMailbox.h
new file mode 100644
index 0000000..9417814
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/PreserveMailbox.h
@@ -0,0 +1,97 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Preserve Registers used for AP Mailbox.
+ *
+ * Save and Restore the normal feature content of the registers being used for
+ * the AP Mailbox.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _PRESERVE_MAILBOX_H_
+#define _PRESERVE_MAILBOX_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+#define MAX_PRESERVE_REGISTER_ENTRIES 2 ///< There is room on the heap for up to this per node.
+
+/// Reference to a save buffer.
+typedef UINT32 (*MAILBOX_REGISTER_SAVE_ENTRY) [MAX_PRESERVE_REGISTER_ENTRIES];
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Family specific mailbox register descriptor.
+ *
+ * Describes a register and bits within the register used as the mailbox.
+ */
+typedef struct {
+ PCI_ADDR Register; ///< The PCI address of a mailbox register.
+ UINT32 Mask; ///< The mask of bits used in Register as the mailbox.
+} PRESERVE_MAILBOX_FAMILY_REGISTER;
+
+/**
+ * Descriptor for family specific save-restore.
+ *
+ * Provide a list of the register offsets to save-restore on each node. Optionally, zero the
+ * register instead of restoring it.
+ */
+typedef struct {
+ UINT16 Revision; ///< Interface version
+ // Public Data.
+ BOOLEAN IsZeroOnCold; ///< On a cold boot, zero the register instead of restore.
+ PRESERVE_MAILBOX_FAMILY_REGISTER *RegisterList; ///< The list of registers, terminated by ILLEGAL_SBDFO.
+} PRESERVE_MAILBOX_FAMILY_SERVICES;
+
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N S P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _PRESERVE_MAILBOX_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuApm.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuApm.c
new file mode 100644
index 0000000..d5b3bd7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuApm.c
@@ -0,0 +1,194 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Application Power Management (APM) feature support code.
+ *
+ * Contains code that declares the AGESA CPU APM related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 85057 $ @e \$Date: 2012-12-27 01:35:49 -0600 (Thu, 27 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuApicUtilities.h"
+#include "cpuFeatures.h"
+#include "cpuApm.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_FEATURE_CPUAPM_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+EnableApmOnSocket (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE ApmFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Should Application Power Management (APM) be enabled
+ *
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE APM is supported.
+ * @retval FALSE APM cannot be enabled.
+ *
+ */
+STATIC BOOLEAN
+IsApmFeatureEnabled (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ BOOLEAN IsEnabled;
+ APM_FAMILY_SERVICES *FamilyServices;
+
+ IsEnabled = FALSE;
+
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ GetFeatureServicesOfSocket (&ApmFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+ if (FamilyServices != NULL) {
+ if (FamilyServices->IsApmSupported (FamilyServices, PlatformConfig, Socket, StdHeader)) {
+ IsEnabled = TRUE;
+ break;
+ }
+ }
+ }
+ }
+ return IsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Enable Application Power Management (APM)
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ *
+ */
+STATIC AGESA_STATUS
+InitializeApmFeature (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 BscSocket;
+ UINT32 Ignored;
+ UINT32 Socket;
+ UINT32 NumberOfSockets;
+ AP_TASK TaskPtr;
+ AGESA_STATUS IgnoredSts;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " APM mode is enabled\n");
+
+ IdentifyCore (StdHeader, &BscSocket, &Ignored, &Ignored, &IgnoredSts);
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+
+ TaskPtr.FuncAddress.PfApTask = EnableApmOnSocket;
+ TaskPtr.DataTransfer.DataSizeInDwords = 0;
+ TaskPtr.ExeFlags = WAIT_FOR_CORE;
+
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ if (Socket != BscSocket) {
+ ApUtilRunCodeOnSocketCore ((UINT8) Socket, 0, &TaskPtr, StdHeader);
+ }
+ }
+ }
+
+ EnableApmOnSocket (StdHeader);
+ return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * AP task to enable APM
+ *
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+VOID
+EnableApmOnSocket (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ APM_FAMILY_SERVICES *FamilyServices;
+
+ GetFeatureServicesOfCurrentCore (&ApmFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+ FamilyServices->EnableApmOnSocket (FamilyServices,
+ StdHeader);
+}
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureApm =
+{
+ CpuApm,
+ (CPU_FEAT_BEFORE_RELINQUISH_AP | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+ IsApmFeatureEnabled,
+ InitializeApmFeature
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuApm.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuApm.h
new file mode 100644
index 0000000..ce418ec
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuApm.h
@@ -0,0 +1,127 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Application Power Management (APM) Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU APM related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_APM_H_
+#define _CPU_APM_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (APM_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if Application Power Management (APM) is supported.
+ *
+ * @param[in] ApmServices APM services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] Socket Zero-based socket number.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE APM is supported.
+ * @retval FALSE APM is not supported.
+ *
+ */
+typedef BOOLEAN F_APM_IS_SUPPORTED (
+ IN APM_FAMILY_SERVICES *CpbServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_APM_IS_SUPPORTED *PF_APM_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to enable APM.
+ *
+ * @param[in] ApmServices APM services.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_APM_INIT (
+ IN APM_FAMILY_SERVICES *ApmServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_APM_INIT *PF_APM_INIT;
+
+/**
+ * Provide the interface to the APM Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _APM_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_APM_IS_SUPPORTED IsApmSupported; ///< Method: Family specific call to check if APM is supported.
+ PF_APM_INIT EnableApmOnSocket; ///< Method: Family specific call to enable APM.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N S P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _CPU_APM_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuC6State.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuC6State.c
new file mode 100644
index 0000000..9a1d937
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuC6State.c
@@ -0,0 +1,260 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU C6 feature support code.
+ *
+ * Contains code that declares the AGESA CPU C6 related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuEarlyInit.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "OptionMultiSocket.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "cpuFeatures.h"
+#include "cpuC6State.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_FEATURE_CPUC6STATE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+EnableC6OnSocket (
+ IN VOID *EntryPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE C6FamilyServiceTable;
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Should C6 be enabled
+ *
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE C6 is supported.
+ * @retval FALSE C6 cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsC6FeatureEnabled (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ BOOLEAN IsEnabled;
+ C6_FAMILY_SERVICES *FamilyServices;
+
+ IsEnabled = FALSE;
+ if (PlatformConfig->CStateMode == CStateModeC6) {
+ IsEnabled = TRUE;
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ GetFeatureServicesOfSocket (&C6FamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+ if ((FamilyServices == NULL) || !FamilyServices->IsC6Supported (FamilyServices, Socket, PlatformConfig, StdHeader)) {
+ IsEnabled = FALSE;
+ break;
+ }
+ }
+ }
+ }
+ return IsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Enable the C6 C-state
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeC6Feature (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 BscSocket;
+ UINT32 Ignored;
+ UINT32 BscCoreNum;
+ UINT32 Core;
+ UINT32 Socket;
+ UINT32 NumberOfSockets;
+ UINT32 NumberOfCores;
+ AP_TASK TaskPtr;
+ AMD_CPU_EARLY_PARAMS CpuEarlyParams;
+ C6_FAMILY_SERVICES *C6FamilyServices;
+ AGESA_STATUS IgnoredSts;
+
+ CpuEarlyParams.PlatformConfig = *PlatformConfig;
+
+ TaskPtr.FuncAddress.PfApTaskIC = EnableC6OnSocket;
+ TaskPtr.DataTransfer.DataSizeInDwords = 2;
+ TaskPtr.DataTransfer.DataPtr = &EntryPoint;
+ TaskPtr.DataTransfer.DataTransferFlags = 0;
+ TaskPtr.ExeFlags = PASS_EARLY_PARAMS;
+ OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, &CpuEarlyParams);
+
+ if ((EntryPoint & (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC)) != 0) {
+ // Load any required microcode patches on both normal boot and resume from S3.
+ IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+ GetFeatureServicesOfSocket (&C6FamilyServiceTable, BscSocket, (CONST VOID **)&C6FamilyServices, StdHeader);
+ if (C6FamilyServices != NULL) {
+ C6FamilyServices->ReloadMicrocodePatchAfterMemInit (StdHeader);
+ }
+
+ // run code on all APs
+ TaskPtr.DataTransfer.DataSizeInDwords = 0;
+ TaskPtr.ExeFlags = 0;
+
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ GetFeatureServicesOfSocket (&C6FamilyServiceTable, Socket, (CONST VOID **)&C6FamilyServices, StdHeader);
+ if (C6FamilyServices != NULL) {
+ // run code on all APs
+ TaskPtr.FuncAddress.PfApTask = C6FamilyServices->ReloadMicrocodePatchAfterMemInit;
+ if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+ for (Core = 0; Core < NumberOfCores; Core++) {
+ if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+ ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * 'Local' core 0 task to enable C6 on it's socket.
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] StdHeader Config Handle for library, services.
+ * @param[in] CpuEarlyParams Service parameters.
+ *
+ */
+VOID
+STATIC
+EnableC6OnSocket (
+ IN VOID *EntryPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ )
+{
+
+ C6_FAMILY_SERVICES *FamilyServices;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " C6 is enabled\n");
+
+ GetFeatureServicesOfCurrentCore (&C6FamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+ FamilyServices->InitializeC6 (FamilyServices,
+ *((UINT64 *) EntryPoint),
+ &CpuEarlyParams->PlatformConfig,
+ StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Reload microcode patch after memory is initialized.
+ *
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+VOID
+ReloadMicrocodePatchAfterMemInit (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ LoadMicrocodePatch (StdHeader);
+}
+
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureC6State =
+{
+ C6Cstate,
+ (CPU_FEAT_AFTER_PM_INIT | CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC | CPU_FEAT_BEFORE_RELINQUISH_AP),
+ IsC6FeatureEnabled,
+ InitializeC6Feature
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuC6State.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuC6State.h
new file mode 100644
index 0000000..1f77ca4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuC6State.h
@@ -0,0 +1,156 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU C6 Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU C6 related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_C6_STATE_H_
+#define _CPU_C6_STATE_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (C6_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if C6 is supported.
+ *
+ * @param[in] C6Services C6 C-state services.
+ * @param[in] Socket Zero-based socket number.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE C6 is supported.
+ * @retval FALSE C6 is not supported.
+ *
+ */
+typedef BOOLEAN F_C6_IS_SUPPORTED (
+ IN C6_FAMILY_SERVICES *C6Services,
+ IN UINT32 Socket,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_C6_IS_SUPPORTED *PF_C6_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to enable C6.
+ *
+ * @param[in] C6Services C6 services.
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_C6_INIT (
+ IN C6_FAMILY_SERVICES *C6Services,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_C6_INIT *PF_C6_INIT;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to reload microcode patch after memory is initialized.
+ *
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+typedef VOID F_C6_RELOAD_MICROCODE_PATCH_AFTER_MEM_INIT (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_C6_RELOAD_MICROCODE_PATCH_AFTER_MEM_INIT *PF_C6_RELOAD_MICROCODE_PATCH_AFTER_MEM_INIT;
+
+/**
+ * Provide the interface to the C6 Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _C6_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_C6_IS_SUPPORTED IsC6Supported; ///< Method: Family specific call to check if C6 is supported.
+ PF_C6_INIT InitializeC6; ///< Method: Family specific call to enable C6.
+ PF_C6_RELOAD_MICROCODE_PATCH_AFTER_MEM_INIT ReloadMicrocodePatchAfterMemInit; ///< Method: Family specific call to reload microcode patch after memory is initialized.
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Reload microcode patch after memory is initialized.
+ *
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+VOID
+ReloadMicrocodePatchAfterMemInit (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N S P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _CPU_C6_STATE_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCacheFlushOnHalt.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCacheFlushOnHalt.c
new file mode 100644
index 0000000..cf7d157
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCacheFlushOnHalt.c
@@ -0,0 +1,199 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Cache Flush On Halt Function.
+ *
+ * Contains code to initialize Cache Flush On Halt feature.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFeatures.h"
+#include "cpuApicUtilities.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_CPU_FEATURE_CPUCACHEFLUSHONHALT_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE CacheFlushOnHaltFamilyServiceTable;
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+EnableCacheFlushOnHaltOnSocket (
+ IN VOID *EntryPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ );
+
+AGESA_STATUS
+InitializeCacheFlushOnHaltFeature (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * P U B L I C F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Should cache flush on halt be enabled
+ *
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE core leveling is supported.
+ * @retval FALSE core leveling cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsCFOHEnabled (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return (TRUE);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * InitializeCacheFlushOnHaltFeature
+ *
+ * CPU feature leveling. Enable Cpu Cache Flush On Halt Function
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in,out] StdHeader Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ * @return The most severe status of any family specific service.
+ */
+AGESA_STATUS
+InitializeCacheFlushOnHaltFeature (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ AP_TASK TaskPtr;
+ AMD_CPU_EARLY_PARAMS CpuEarlyParams;
+
+ CpuEarlyParams.PlatformConfig = *PlatformConfig;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " Cache flush on hlt feature is enabled\n");
+ TaskPtr.FuncAddress.PfApTaskIC = EnableCacheFlushOnHaltOnSocket;
+ TaskPtr.DataTransfer.DataSizeInDwords = 2;
+ TaskPtr.DataTransfer.DataPtr = &EntryPoint;
+ TaskPtr.DataTransfer.DataTransferFlags = 0;
+ TaskPtr.ExeFlags = PASS_EARLY_PARAMS;
+ OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, &CpuEarlyParams);
+
+ return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * 'Local' core 0 task to enable Cache Flush On Halt on it's socket.
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] StdHeader Config Handle for library, services.
+ * @param[in] CpuEarlyParams Service parameters.
+ *
+ */
+VOID
+STATIC
+EnableCacheFlushOnHaltOnSocket (
+ IN VOID *EntryPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ )
+{
+ CPU_CFOH_FAMILY_SERVICES *FamilyServices;
+
+ GetFeatureServicesOfCurrentCore (&CacheFlushOnHaltFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+ if (FamilyServices != NULL) {
+ FamilyServices->SetCacheFlushOnHaltRegister (FamilyServices, *((UINT64 *) EntryPoint), &CpuEarlyParams->PlatformConfig, StdHeader);
+ }
+}
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCacheFlushOnHalt =
+{
+ CacheFlushOnHalt,
+ (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+ IsCFOHEnabled,
+ InitializeCacheFlushOnHaltFeature
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCacheInit.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCacheInit.c
new file mode 100644
index 0000000..b5a38b8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCacheInit.c
@@ -0,0 +1,751 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Execution Cache Allocation functions.
+ *
+ * Contains code for doing Execution Cache Allocation for ROM space
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "Topology.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuCacheInit.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_FEATURE_CPUCACHEINIT_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+// 4G - 1, ~max ROM space
+#define SIZE_INFINITE_EXE_CACHE 0xFFFFFFFFul
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * L2 cache Association to Way translation table
+ *----------------------------------------------------------------------------
+ */
+CONST UINT8 ROMDATA L2AssocToL2WayTranslationTable[] =
+{
+ 0,
+ 1,
+ 2,
+ 0xFF,
+ 4,
+ 0xFF,
+ 8,
+ 0xFF,
+ 16,
+ 0xFF,
+ 32,
+ 48,
+ 64,
+ 96,
+ 128,
+ 0xFF,
+};
+
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+UINT8
+STATIC
+Ceiling (
+ IN UINT32 Divisor,
+ IN UINT32 Dividend
+ );
+
+UINT32
+STATIC
+CalculateOccupiedExeCache (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+CompareRegions (
+ IN EXECUTION_CACHE_REGION ARegion,
+ IN EXECUTION_CACHE_REGION BRegion,
+ IN OUT MERGED_CACHE_REGION *CRegion,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+STATIC
+IsPowerOfTwo (
+ IN UINT32 TestNumber
+ );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will setup ROM execution cache.
+ *
+ * The execution cache regions are passed in, the max number of execution cache regions
+ * is three. Several rules are checked for compliance. If a rule test fails then one of
+ * these error suffixes will be added to the general CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR
+ * in the SubReason field
+ * -1 available cache size is less than requested, the ROM execution cache
+ * region has been reduced or eliminated.
+ * -2 at least one execution cache region crosses the 1MB line, the ROM execution
+ * cache size has been reduced.
+ * -3 at least one execution cache region crosses the 4GB line, the ROM execution
+ * cache size has been reduced.
+ * -4 the start address of a region is not at the boundary of cache size,
+ * the starting address has been adjusted downward
+ * -5 execution cache start address less than D0000, request is ignored
+ * -6 more than 2 execution cache regions are above 1MB, request is ignored
+ * If the start address of all three regions are zero, then no execution cache is allocated.
+ *
+ * @param[in] StdHeader Handle to config for library and services
+ * @param[in] AmdExeAddrMapPtr Pointer to the start of EXECUTION_CACHE_REGION array
+ *
+ * @retval AGESA_SUCCESS No error
+ * @retval AGESA_WARNING AGESA_CACHE_SIZE_REDUCED; AGESA_CACHE_REGIONS_ACROSS_1MB;
+ * AGESA_CACHE_REGIONS_ACROSS_4GB;
+ * @retval AGESA_ERROR AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY;
+ * AGESA_CACHE_START_ADDRESS_LESS_D0000;
+ * AGESA_THREE_CACHE_REGIONS_ABOVE_1MB;
+ *
+ */
+AGESA_STATUS
+AllocateExecutionCache (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN EXECUTION_CACHE_REGION *AmdExeAddrMapPtr
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AMD_GET_EXE_SIZE_PARAMS AmdGetExeSize;
+ UINT32 CurrentAllocatedExeCacheSize;
+ UINT32 RemainingExecutionCacheSize;
+ UINT64 MsrData;
+ UINT64 SecondMsrData;
+ UINT32 RequestStartAddr;
+ UINT32 RequestSize;
+ UINT32 StartFixMtrr;
+ UINT32 CurrentMtrr;
+ UINT32 EndFixMtrr;
+ UINT8 i;
+ UINT8 Ignored;
+ CACHE_INFO *CacheInfoPtr;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ EXECUTION_CACHE_REGION MtrrV6;
+ EXECUTION_CACHE_REGION MtrrV7;
+ MERGED_CACHE_REGION Result;
+
+ //
+ // If start addresses of all three regions are zero, then return early
+ //
+ if (AmdExeAddrMapPtr[0].ExeCacheStartAddr == 0) {
+ if (AmdExeAddrMapPtr[1].ExeCacheStartAddr == 0) {
+ if (AmdExeAddrMapPtr[2].ExeCacheStartAddr == 0) {
+ // No regions defined by the caller
+ return AGESA_SUCCESS;
+ }
+ }
+ }
+
+ // Get available cache size for ROM execution
+ AmdGetExeSize.StdHeader = *StdHeader;
+ AgesaStatus = AmdGetAvailableExeCacheSize (&AmdGetExeSize);
+ CurrentAllocatedExeCacheSize = CalculateOccupiedExeCache (StdHeader);
+ ASSERT (CurrentAllocatedExeCacheSize <= AmdGetExeSize.AvailableExeCacheSize);
+ IDS_HDT_CONSOLE (CPU_TRACE, " Cache size available for execution cache: 0x%x\n", AmdGetExeSize.AvailableExeCacheSize);
+ RemainingExecutionCacheSize = AmdGetExeSize.AvailableExeCacheSize - CurrentAllocatedExeCacheSize;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &Ignored, StdHeader);
+
+ // Process each request entry 0 to 2
+ for (i = 0; i < 3; i++) {
+ // Exit if no more cache available
+ if (RemainingExecutionCacheSize == 0) {
+ break;
+ }
+
+ // Skip the region if ExeCacheSize = 0
+ if (AmdExeAddrMapPtr[i].ExeCacheSize == 0) {
+ continue;
+ }
+
+ // Align starting addresses on 32K boundary
+ AmdExeAddrMapPtr[i].ExeCacheStartAddr =
+ AmdExeAddrMapPtr[i].ExeCacheStartAddr & 0xFFFF8000;
+
+ // Adjust size to multiple of 32K (rounding up)
+ if ((AmdExeAddrMapPtr[i].ExeCacheSize % 0x8000) != 0) {
+ AmdExeAddrMapPtr[i].ExeCacheSize = ((AmdExeAddrMapPtr[i].ExeCacheSize + 0x8000) & 0xFFFF8000);
+ }
+
+ // Boundary alignment check and confirm size is an even power of two
+ if ( !IsPowerOfTwo (AmdExeAddrMapPtr[i].ExeCacheSize) ||
+ ((AmdExeAddrMapPtr[i].ExeCacheStartAddr % AmdExeAddrMapPtr[i].ExeCacheSize) != 0) ) {
+ AgesaStatus = AGESA_ERROR;
+ PutEventLog (AgesaStatus,
+ (CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR + AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY),
+ i, AmdExeAddrMapPtr[i].ExeCacheStartAddr, AmdExeAddrMapPtr[i].ExeCacheSize, 0, StdHeader);
+ break;
+ }
+
+ // Check start address boundary
+ if (AmdExeAddrMapPtr[i].ExeCacheStartAddr < 0xD0000) {
+ AgesaStatus = AGESA_ERROR;
+ PutEventLog (AgesaStatus,
+ (CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR + AGESA_CACHE_START_ADDRESS_LESS_D0000),
+ i, AmdExeAddrMapPtr[i].ExeCacheStartAddr, AmdExeAddrMapPtr[i].ExeCacheSize, 0, StdHeader);
+ break;
+ }
+
+ if (CacheInfoPtr->CarExeType == LimitedByL2Size) {
+ // Verify available execution cache size for region 0 to 2 request
+ if (RemainingExecutionCacheSize < AmdExeAddrMapPtr[i].ExeCacheSize) {
+ // Request is larger than available, reduce the allocation & report the change
+ AmdExeAddrMapPtr[i].ExeCacheSize = RemainingExecutionCacheSize;
+ RemainingExecutionCacheSize = 0;
+ AgesaStatus = AGESA_WARNING;
+ PutEventLog (AgesaStatus,
+ (CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR + AGESA_CACHE_SIZE_REDUCED),
+ i, AmdExeAddrMapPtr[i].ExeCacheStartAddr, AmdExeAddrMapPtr[i].ExeCacheSize, 0, StdHeader);
+ } else {
+ RemainingExecutionCacheSize = RemainingExecutionCacheSize - AmdExeAddrMapPtr[i].ExeCacheSize;
+ }
+ }
+ IDS_HDT_CONSOLE (CPU_TRACE, " Exe cache allocated: Base 0x%x, Size 0x%x\n", AmdExeAddrMapPtr[i].ExeCacheStartAddr, AmdExeAddrMapPtr[i].ExeCacheSize);
+
+ RequestStartAddr = AmdExeAddrMapPtr[i].ExeCacheStartAddr;
+ RequestSize = AmdExeAddrMapPtr[i].ExeCacheSize;
+
+ if (RequestStartAddr < 0x100000) {
+ // Region starts below 1MB - Fixed MTTR region,
+ // turn on modification bit: MtrrFixDramModEn
+ LibAmdMsrRead (MSR_SYS_CFG, &MsrData, StdHeader);
+ MsrData |= 0x80000;
+ LibAmdMsrWrite (MSR_SYS_CFG, &MsrData, StdHeader);
+
+
+ // Check for 1M boundary crossing
+ if ((RequestStartAddr + RequestSize) > 0x100000) {
+ // Request spans the 1M boundary, reduce the size & report the change
+ RequestSize = 0x100000 - RequestStartAddr;
+ AmdExeAddrMapPtr[i].ExeCacheSize = RequestSize;
+ AgesaStatus = AGESA_WARNING;
+ PutEventLog (AgesaStatus,
+ (CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR + AGESA_CACHE_REGIONS_ACROSS_1MB),
+ i, RequestStartAddr, RequestSize, 0, StdHeader);
+ }
+
+ // Find start MTTR and end MTTR for the requested region
+ StartFixMtrr = AMD_MTRR_FIX4K_BASE + ((RequestStartAddr >> 15) & 0x7);
+ EndFixMtrr = AMD_MTRR_FIX4K_BASE + ((((RequestStartAddr + RequestSize) - 1) >> 15) & 0x7);
+
+ //
+ //Check Mtrr before we use it,
+ // if Mtrr has been used, we need to recover the previously allocated size.
+ // (only work in blocks of 32K size - no splitting of ways)
+ for (CurrentMtrr = StartFixMtrr; CurrentMtrr <= EndFixMtrr; CurrentMtrr++) {
+ LibAmdMsrRead (CurrentMtrr, &MsrData, StdHeader);
+ if ((CacheInfoPtr->CarExeType == LimitedByL2Size) && (MsrData != 0)) {
+ // MTRR previously allocated, recover size
+ RemainingExecutionCacheSize = RemainingExecutionCacheSize + 0x8000;
+ } else {
+ // Allocate this MTRR
+ MsrData = WP_IO;
+ LibAmdMsrWrite (CurrentMtrr, &MsrData, StdHeader);
+ }
+ }
+ // Turn off modification bit: MtrrFixDramModEn
+ LibAmdMsrRead (MSR_SYS_CFG, &MsrData, StdHeader);
+ MsrData &= 0xFFFFFFFFFFF7FFFFULL;
+ LibAmdMsrWrite (MSR_SYS_CFG, &MsrData, StdHeader);
+
+
+ } else {
+ // Region above 1MB - Variable MTTR region
+ // Need to check both VarMTRRs for each requested region for match or overlap
+ //
+
+ // Check for 4G boundary crossing (using size-1 to keep in 32bit math range)
+ if ((0xFFFFFFFFUL - RequestStartAddr) < (RequestSize - 1)) {
+ RequestSize = (0xFFFFFFFFUL - RequestStartAddr) + 1;
+ AgesaStatus = AGESA_WARNING;
+ AmdExeAddrMapPtr[i].ExeCacheSize = RequestSize;
+ PutEventLog (AgesaStatus,
+ (CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR + AGESA_CACHE_REGIONS_ACROSS_4GB),
+ i, RequestStartAddr, RequestSize, 0, StdHeader);
+ }
+ LibAmdMsrRead (AMD_MTRR_VARIABLE_BASE6, &MsrData, StdHeader);
+ MtrrV6.ExeCacheStartAddr = ((UINT32) MsrData) & 0xFFFFF000UL;
+ LibAmdMsrRead (AMD_MTRR_VARIABLE_BASE6 + 1, &MsrData, StdHeader);
+ MtrrV6.ExeCacheSize = (0xFFFFFFFFUL - (((UINT32) MsrData) & 0xFFFFF000UL)) + 1;
+
+ LibAmdMsrRead (AMD_MTRR_VARIABLE_BASE7, &MsrData, StdHeader);
+ MtrrV7.ExeCacheStartAddr = ((UINT32) MsrData) & 0xFFFFF000UL;
+ LibAmdMsrRead (AMD_MTRR_VARIABLE_BASE7 + 1, &MsrData, StdHeader);
+ MtrrV7.ExeCacheSize = (0xFFFFFFFFUL - (((UINT32) MsrData) & 0xFFFFF000UL)) + 1;
+
+ CompareRegions (AmdExeAddrMapPtr[i], MtrrV6, &Result, StdHeader);
+ if (Result.OverlapType == EmptySet) {
+ // MTRR6 is empty. Allocate request into MTRR6.
+ // Note: since all merges are moved down to MTRR6, if MTRR6 is empty so should MTRR7 also be empty
+ MtrrV6.ExeCacheStartAddr = AmdExeAddrMapPtr[i].ExeCacheStartAddr;
+ MtrrV6.ExeCacheSize = AmdExeAddrMapPtr[i].ExeCacheSize;
+ } else if ((Result.OverlapType == Disjoint) ||
+ (Result.OverlapType == NotCombinable)) {
+ // MTRR6 is in use, and request does not overlap with MTRR6, check MTRR7
+ CompareRegions (AmdExeAddrMapPtr[i], MtrrV7, &Result, StdHeader);
+ if (Result.OverlapType == EmptySet) {
+ // MTRR7 is empty. Allocate request into MTRR7.
+ MtrrV7.ExeCacheStartAddr = AmdExeAddrMapPtr[i].ExeCacheStartAddr;
+ MtrrV7.ExeCacheSize = AmdExeAddrMapPtr[i].ExeCacheSize;
+ } else if ((Result.OverlapType == Disjoint) ||
+ (Result.OverlapType == NotCombinable)) {
+ // MTRR7 is also in use and request does not overlap - error: 3rd region above 1M
+ AgesaStatus = AGESA_ERROR;
+ PutEventLog (AgesaStatus,
+ (CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR + AGESA_THREE_CACHE_REGIONS_ABOVE_1MB),
+ i, AmdExeAddrMapPtr[i].ExeCacheStartAddr, AmdExeAddrMapPtr[i].ExeCacheSize, 0, StdHeader);
+ break;
+ } else {
+ // Merge request with MTRR7
+ MtrrV7.ExeCacheStartAddr = Result.MergedStartAddr;
+ MtrrV7.ExeCacheSize = Result.MergedSize;
+ if (CacheInfoPtr->CarExeType == LimitedByL2Size) {
+ RemainingExecutionCacheSize += Result.OverlapAmount;
+ }
+ }
+ } else {
+ // Request overlaps with MTRR6, Merge request with MTRR6
+ MtrrV6.ExeCacheStartAddr = Result.MergedStartAddr;
+ MtrrV6.ExeCacheSize = Result.MergedSize;
+ if (CacheInfoPtr->CarExeType == LimitedByL2Size) {
+ RemainingExecutionCacheSize += Result.OverlapAmount;
+ }
+ CompareRegions (MtrrV6, MtrrV7, &Result, StdHeader);
+ if ((Result.OverlapType != Disjoint) &&
+ (Result.OverlapType != EmptySet) &&
+ (Result.OverlapType != NotCombinable)) {
+ // MTRR6 and MTRR7 now overlap, merge them into MTRR6
+ MtrrV6.ExeCacheStartAddr = Result.MergedStartAddr;
+ MtrrV6.ExeCacheSize = Result.MergedSize;
+ MtrrV7.ExeCacheStartAddr = 0;
+ MtrrV7.ExeCacheSize = 0;
+ if (CacheInfoPtr->CarExeType == LimitedByL2Size) {
+ RemainingExecutionCacheSize += Result.OverlapAmount;
+ }
+ }
+ }
+
+ // Set the VarMTRRs. Base first, then size/mask; this allows for expanding the region safely.
+ if (MtrrV6.ExeCacheSize != 0) {
+ MsrData = (UINT64) ( 0xFFFFFFFF00000000ULL | ((0xFFFFFFFFUL - (MtrrV6.ExeCacheSize - 1)) | 0x0800UL));
+ MsrData &= CacheInfoPtr->VariableMtrrMask;
+ SecondMsrData = (UINT64) ( MtrrV6.ExeCacheStartAddr | (WP_IO & 0xFULL));
+ } else {
+ MsrData = 0;
+ SecondMsrData = 0;
+ }
+ LibAmdMsrWrite (AMD_MTRR_VARIABLE_BASE6, &SecondMsrData, StdHeader);
+ LibAmdMsrWrite ((AMD_MTRR_VARIABLE_BASE6 + 1), &MsrData, StdHeader);
+
+ if (MtrrV7.ExeCacheSize != 0) {
+ MsrData = (UINT64) ( 0xFFFFFFFF00000000ULL | ((0xFFFFFFFFUL - (MtrrV7.ExeCacheSize - 1)) | 0x0800UL));
+ MsrData &= CacheInfoPtr->VariableMtrrMask;
+ SecondMsrData = (UINT64) ( MtrrV7.ExeCacheStartAddr | (WP_IO & 0xFULL));
+ } else {
+ MsrData = 0;
+ SecondMsrData = 0;
+ }
+ LibAmdMsrWrite (AMD_MTRR_VARIABLE_BASE7, &SecondMsrData, StdHeader);
+ LibAmdMsrWrite ((AMD_MTRR_VARIABLE_BASE7 + 1), &MsrData, StdHeader);
+ } // endif of MTRR region check
+ } // end of requests For loop
+
+ return AgesaStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function calculates available L2 cache space for ROM execution.
+ *
+ * @param[in] AmdGetExeSizeParams Pointer to the start of AmdGetExeSizeParamsPtr structure
+ *
+ * @retval AGESA_SUCCESS No error
+ * @retval AGESA_ALERT No cache available for execution cache.
+ *
+ */
+AGESA_STATUS
+AmdGetAvailableExeCacheSize (
+ IN OUT AMD_GET_EXE_SIZE_PARAMS *AmdGetExeSizeParams
+ )
+{
+ UINT8 WayUsedForCar;
+ UINT8 L2Assoc;
+ UINT32 L2Size;
+ UINT32 L2WaySize;
+ UINT32 CurrentCoreNum;
+ UINT8 L2Ways;
+ UINT8 Ignored;
+ UINT32 DieNumber;
+ UINT32 TotalCores;
+ CPUID_DATA CpuIdDataStruct;
+ CACHE_INFO *CacheInfoPtr;
+ AP_MAIL_INFO ApMailboxInfo;
+ AGESA_STATUS IgnoredStatus;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &AmdGetExeSizeParams->StdHeader);
+ FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &Ignored, &AmdGetExeSizeParams->StdHeader);
+ // CAR_EXE mode is either "Limited by L2 size" or "Infinite Execution space"
+ ASSERT (CacheInfoPtr->CarExeType < MaxCarExeMode);
+ if (CacheInfoPtr->CarExeType == InfiniteExe) {
+ AmdGetExeSizeParams->AvailableExeCacheSize = SIZE_INFINITE_EXE_CACHE;
+ return AGESA_SUCCESS;
+ }
+
+ // EXE cache size is limited by size of the L2, minus previous allocations for stack, heap, etc.
+ // Check for L2 cache size and way size
+ LibAmdCpuidRead (AMD_CPUID_L2L3Cache_L2TLB, &CpuIdDataStruct, &AmdGetExeSizeParams->StdHeader);
+ L2Assoc = (UINT8) ((CpuIdDataStruct.ECX_Reg >> 12) & 0x0F);
+
+ // get L2Ways from L2 Association to Way translation table
+ L2Ways = L2AssocToL2WayTranslationTable[L2Assoc];
+ ASSERT (L2Ways != 0xFF);
+
+ // get L2Size
+ L2Size = 1024 * ((CpuIdDataStruct.ECX_Reg >> 16) & 0xFFFF);
+
+ // get each L2WaySize
+ L2WaySize = L2Size / L2Ways;
+
+ // Determine the size for execution cache
+ if (IsBsp (&AmdGetExeSizeParams->StdHeader, &IgnoredStatus)) {
+ // BSC (Boot Strap Core)
+ WayUsedForCar = Ceiling (CacheInfoPtr->BspStackSize, L2WaySize) +
+ Ceiling (CacheInfoPtr->MemTrainingBufferSize, L2WaySize) +
+ Ceiling (AMD_HEAP_SIZE_PER_CORE , L2WaySize) +
+ Ceiling (CacheInfoPtr->SharedMemSize, L2WaySize);
+ } else {
+ // AP (Application Processor)
+ GetCurrentCore (&CurrentCoreNum, &AmdGetExeSizeParams->StdHeader);
+
+ GetApMailbox (&ApMailboxInfo.Info, &AmdGetExeSizeParams->StdHeader);
+ DieNumber = (1 << ApMailboxInfo.Fields.ModuleType);
+ GetActiveCoresInCurrentSocket (&TotalCores, &AmdGetExeSizeParams->StdHeader);
+ ASSERT ((TotalCores % DieNumber) == 0);
+ if ((CurrentCoreNum % (TotalCores / DieNumber)) == 0) {
+ WayUsedForCar = Ceiling (CacheInfoPtr->Core0StackSize , L2WaySize) +
+ Ceiling (CacheInfoPtr->MemTrainingBufferSize, L2WaySize) +
+ Ceiling (AMD_HEAP_SIZE_PER_CORE , L2WaySize) +
+ Ceiling (CacheInfoPtr->SharedMemSize, L2WaySize);
+ } else {
+ WayUsedForCar = Ceiling (CacheInfoPtr->Core1StackSize , L2WaySize) +
+ Ceiling (AMD_HEAP_SIZE_PER_CORE , L2WaySize) +
+ Ceiling (CacheInfoPtr->SharedMemSize, L2WaySize);
+ }
+ }
+
+ ASSERT (WayUsedForCar < L2Ways);
+
+ if (WayUsedForCar < L2Ways) {
+ AmdGetExeSizeParams->AvailableExeCacheSize = L2WaySize * (L2Ways - WayUsedForCar);
+ return AGESA_SUCCESS;
+ } else {
+ AmdGetExeSizeParams->AvailableExeCacheSize = 0;
+ return AGESA_ALERT;
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function rounds a quotient up if the remainder is not zero.
+ *
+ * @param[in] Divisor The divisor
+ * @param[in] Dividend The dividend
+ *
+ * @retval Value Rounded quotient
+ *
+ */
+UINT8
+STATIC
+Ceiling (
+ IN UINT32 Divisor,
+ IN UINT32 Dividend
+ )
+{
+ if ((Divisor % Dividend) == 0) {
+ return (UINT8) (Divisor / Dividend);
+ } else {
+ return (UINT8) ((Divisor / Dividend) + 1);
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function calculates the amount of cache that has already been allocated on the
+ * executing core.
+ *
+ * @param[in] StdHeader Handle to config for library and services
+ *
+ * @returns Allocated size in bytes
+ *
+ */
+UINT32
+STATIC
+CalculateOccupiedExeCache (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 OccupExeCacheSize;
+ UINT64 MsrData;
+ UINT8 i;
+
+ MsrData = 0;
+ OccupExeCacheSize = 0;
+
+ //
+ //Calculate Variable MTRR base 6~7
+ //
+ for (i = 0; i < 2; i++) {
+ LibAmdMsrRead ((AMD_MTRR_VARIABLE_BASE6 + (2*i)), &MsrData, StdHeader);
+ if (MsrData != 0) {
+ LibAmdMsrRead ((AMD_MTRR_VARIABLE_BASE6 + (2*i + 1)), &MsrData, StdHeader);
+ OccupExeCacheSize = OccupExeCacheSize + ((~((MsrData & (0xFFFF8000)) - 1))&0xFFFF8000);
+ }
+ }
+
+ //
+ //Calculate Fixed MTRR base D0000~F8000
+ //
+ for (i = 0; i < 6; i++) {
+ LibAmdMsrRead ((AMD_MTRR_FIX4K_BASE + 2 + i), &MsrData, StdHeader);
+ if (MsrData!= 0) {
+ OccupExeCacheSize = OccupExeCacheSize + 0x8000;
+ }
+ }
+
+ return (UINT32)OccupExeCacheSize;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function compares two memory regions for overlap and returns the combined
+ * Base,Size to describe the new combined region.
+ *
+ * There are 13 cases for how two regions may overlap: key: [] region A, ** region B
+ * 1- [ ] *** 9- *** [ ] disjoint regions
+ * 2- [ ]*** 10- ***[ ] adjacent regions
+ * 3- [ ***] 11- **[**] common ending
+ * 4- [ *]** 12- *[** ] extending
+ * 5- [ ** ] 13- *[*]* contained
+ * 6- [*** ] common start, contained
+ * 7- [***] identity
+ * 8- [**]** common start, extending
+ * 0- one of the regions is empty (has base=0)
+ *
+ * @param[in] ARegion pointer to the base,size pair that describes region A
+ * @param[in] BRegion pointer to the base,size pair that describes region B
+ * @param[in,out] CRegion pointer to the base,size pair that describes region C This struct also has the
+ * overlap type and the amount of overlap between the regions.
+ * @param[in] StdHeader Handle to config for library and services
+ *
+ * @returns void, nothing
+ */
+
+VOID
+STATIC
+CompareRegions (
+ IN EXECUTION_CACHE_REGION ARegion,
+ IN EXECUTION_CACHE_REGION BRegion,
+ IN OUT MERGED_CACHE_REGION *CRegion,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ // Use Int64 to handle regions ending at or above the 4G boundary.
+ UINT64 EndOfA;
+ UINT64 EndOfB;
+
+
+ if ((BRegion.ExeCacheStartAddr == 0) ||
+ (ARegion.ExeCacheStartAddr == 0)) {
+ CRegion->MergedStartAddr =
+ CRegion->MergedSize =
+ CRegion->OverlapAmount = 0;
+ CRegion->OverlapType = EmptySet;
+ return;
+ }
+ if (BRegion.ExeCacheStartAddr < ARegion.ExeCacheStartAddr) {
+ //swap regions A & B. this collapses types 9-13 onto 1-5 and reduces the number of tests
+ CRegion->MergedStartAddr = ARegion.ExeCacheStartAddr;
+ CRegion->MergedSize = ARegion.ExeCacheSize;
+ ARegion = BRegion;
+ BRegion.ExeCacheStartAddr = CRegion->MergedStartAddr;
+ BRegion.ExeCacheSize = CRegion->MergedSize;
+ }
+ CRegion->MergedStartAddr =
+ CRegion->MergedSize =
+ CRegion->OverlapType =
+ CRegion->OverlapAmount = 0;
+
+ if (ARegion.ExeCacheStartAddr == BRegion.ExeCacheStartAddr) {
+ // Common start, cases 6,7, or 8
+ if (ARegion.ExeCacheSize == BRegion.ExeCacheSize) {
+ // case 7, identity. Need to recover the overlap size
+ CRegion->MergedStartAddr = ARegion.ExeCacheStartAddr;
+ CRegion->MergedSize = ARegion.ExeCacheSize;
+ CRegion->OverlapAmount = ARegion.ExeCacheSize;
+ CRegion->OverlapType = Identity;
+ } else if (ARegion.ExeCacheSize < BRegion.ExeCacheSize) {
+ // case 8, common start extending
+ CRegion->MergedStartAddr = ARegion.ExeCacheStartAddr;
+ CRegion->MergedSize = BRegion.ExeCacheSize;
+ CRegion->OverlapType = CommonStartExtending;
+ CRegion->OverlapAmount = ARegion.ExeCacheSize;
+ } else {
+ // case 6, common start contained
+ CRegion->MergedStartAddr = ARegion.ExeCacheStartAddr;
+ CRegion->MergedSize = ARegion.ExeCacheSize;
+ CRegion->OverlapType = CommonStartContained;
+ CRegion->OverlapAmount = BRegion.ExeCacheSize;
+ }
+ } else {
+ // A_Base is less than B_Base. check for cases 1-5
+ EndOfA = ((UINT64) ARegion.ExeCacheStartAddr) + ((UINT64) ARegion.ExeCacheSize);
+
+ if (EndOfA < ((UINT64) BRegion.ExeCacheStartAddr)) {
+ // case 1, disjoint
+ CRegion->MergedStartAddr =
+ CRegion->MergedSize =
+ CRegion->OverlapAmount = 0;
+ CRegion->OverlapType = Disjoint;
+
+ } else if (EndOfA == ((UINT64) BRegion.ExeCacheStartAddr)) {
+ // case 2, adjacent
+ CRegion->OverlapType = Adjacent;
+ CRegion->MergedStartAddr = ARegion.ExeCacheStartAddr;
+ CRegion->MergedSize = ARegion.ExeCacheSize + BRegion.ExeCacheSize;
+ CRegion->OverlapAmount = 0;
+ } else {
+ // EndOfA is > B_Base. check for cases 3,4,5
+ EndOfB = ((UINT64) BRegion.ExeCacheStartAddr) + ((UINT64) BRegion.ExeCacheSize);
+
+ if ( EndOfA < EndOfB) {
+ // case 4, extending
+ CRegion->OverlapType = Extending;
+ CRegion->MergedStartAddr = ARegion.ExeCacheStartAddr;
+ CRegion->MergedSize = (UINT32) (EndOfB - ((UINT64) ARegion.ExeCacheStartAddr));
+ CRegion->OverlapAmount = (UINT32) (EndOfA - ((UINT64) BRegion.ExeCacheStartAddr));
+ } else {
+ // case 3, same end; or case 5, contained
+ CRegion->OverlapType = Contained;
+ CRegion->MergedStartAddr = ARegion.ExeCacheStartAddr;
+ CRegion->MergedSize = ARegion.ExeCacheSize;
+ CRegion->OverlapAmount = BRegion.ExeCacheSize;
+ }
+ }
+ } // endif
+ // Once we have combined the regions, they must still obey the MTRR size and boundary rules
+ if ( CRegion->OverlapType != Disjoint ) {
+ if ((!(IsPowerOfTwo (CRegion->MergedSize))) ||
+ ((CRegion->MergedStartAddr % CRegion->MergedSize) != 0) ) {
+ CRegion->OverlapType = NotCombinable;
+ }
+ }
+
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This local function tests the parameter for being an even power of two
+ *
+ * @param[in] TestNumber Number to check
+ *
+ * @retval TRUE - TestNumber is a power of two,
+ * @retval FALSE - TestNumber is not a power of two
+ *
+ */
+BOOLEAN
+STATIC
+IsPowerOfTwo (
+ IN UINT32 TestNumber
+ )
+{
+ UINT32 PowerTwo;
+
+ ASSERT (TestNumber >= 0x8000UL);
+ PowerTwo = 0x8000UL; // Start at 32K
+ while ( TestNumber > PowerTwo ) {
+ PowerTwo = PowerTwo * 2;
+ }
+ return (((TestNumber % PowerTwo) == 0) ? TRUE: FALSE);
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCacheInit.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCacheInit.h
new file mode 100644
index 0000000..24cc757
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCacheInit.h
@@ -0,0 +1,138 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Execution Cache Allocation functions.
+ *
+ * Contains code for doing Execution Cache Allocation for ROM space
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_CACHE_INIT_H_
+#define _CPU_CACHE_INIT_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define BSP_STACK_SIZE_64K 65536
+#define BSP_STACK_SIZE_32K 32768
+
+#define CORE0_STACK_SIZE 16384
+#define CORE1_STACK_SIZE 4096
+
+#define AMD_MTRR_FIX4K_BASE 0x268
+#define AMD_MTRR_VARIABLE_BASE6 0x20C
+#define AMD_MTRR_VARIABLE_BASE7 0x20E
+
+#define WP_IO 0x0505050505050505ull
+
+#define AGESA_CACHE_SIZE_REDUCED 1
+#define AGESA_CACHE_REGIONS_ACROSS_1MB 2
+#define AGESA_CACHE_REGIONS_ACROSS_4GB 3
+#define AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 4
+#define AGESA_CACHE_START_ADDRESS_LESS_D0000 5
+#define AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 6
+#define AGESA_DEALLOCATE_CACHE_REGIONS 7
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/// Cache-As-Ram Executable region allocation modes
+typedef enum {
+ LimitedByL2Size, ///< Execution space must be allocated from L2
+ InfiniteExe, ///< Family can support unlimited Execution space
+ MaxCarExeMode ///< Used as limit or bounds check
+} CAR_EXE_MODE;
+
+/// Cache Information
+typedef struct {
+ IN UINT32 BspStackSize; ///< Stack size of BSP
+ IN UINT32 Core0StackSize; ///< Stack size of primary cores
+ IN UINT32 Core1StackSize; ///< Stack size of all non primary cores
+ IN UINT32 MemTrainingBufferSize; ///< Memory training buffer size
+ IN UINT32 SharedMemSize; ///< Shared memory size
+ IN UINT64 VariableMtrrMask; ///< Mask to apply before variable MTRR writes
+ IN UINT64 VariableMtrrHeapMask; ///< Mask to apply before variable MTRR writes for use in heap init.
+ IN UINT64 HeapBaseMask; ///< Mask used for the heap MTRR settings
+ IN CAR_EXE_MODE CarExeType; ///< Indicates which algorithm to use when allocating EXE space
+} CACHE_INFO;
+
+/// Merged memory region overlap type
+typedef enum {
+ EmptySet, ///< One of the regions is zero length
+ Disjoint, ///< The two regions do not touch
+ Adjacent, ///< one region is next to the other, no gap
+ CommonEnd, ///< regions overlap with a common end point
+ Extending, ///< the 2nd region is extending the size of the 1st
+ Contained, ///< the 2nd region is wholely contained inside the 1st
+ CommonStartContained, ///< the 2nd region is contained in the 1st with a common start
+ Identity, ///< the two regions are the same
+ CommonStartExtending, ///< the 2nd region has same start as 1st, but is larger size
+ NotCombinable ///< the combined regions do not follow the cache block rules
+} OVERLAP_TYPE;
+
+/// Result of merging two memory regions for cache coverage
+typedef struct {
+ IN OUT UINT32 MergedStartAddr; ///< Start address of the merged regions
+ IN OUT UINT32 MergedSize; ///< Size of the merged regions
+ OUT UINT32 OverlapAmount; ///< the size of the overlapping section
+ OUT OVERLAP_TYPE OverlapType; ///< indicates how the two regions overlap
+} MERGED_CACHE_REGION;
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AllocateExecutionCache (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN EXECUTION_CACHE_REGION *AmdExeAddrMapPtr
+ );
+
+#endif // _CPU_CACHE_INIT_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCdit.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCdit.c
new file mode 100644
index 0000000..e02e870
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCdit.c
@@ -0,0 +1,347 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CDIT, ACPI table related API functions.
+ *
+ * Contains code that generates the CDIT table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------
+ * This file provides functions, that will generate SLIT tables
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionCdit.h"
+#include "heapManager.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "Ids.h"
+#include "cpuFeatures.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuL3Features.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FEATURE_CPUCDIT_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern OPTION_CDIT_CONFIGURATION OptionCditConfiguration; // global user config record
+
+STATIC ACPI_TABLE_HEADER ROMDATA CpuCditHdrStruct =
+{
+ {'C','D','I','T'},
+ 0,
+ 1,
+ 0,
+ {0},
+ {0},
+ 1,
+ {'A','M','D',' '},
+ 1
+};
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+AcpiCditHBufferFind (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT8 **SocketTopologyPtr
+ );
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GetAcpiCditStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT VOID **CditPtr
+ );
+
+AGESA_STATUS
+GetAcpiCditMain (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT VOID **CditPtr
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern CPU_FAMILY_SUPPORT_TABLE L3FeatureFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function generates a complete CDIT table into a memory buffer.
+ * After completion, this table must be set by the system BIOS into its
+ * internal ACPI namespace, and linked into the RSDT/XSDT
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[out] CditPtr Point to Cdit Struct including buffer address and length
+ *
+ * @retval UINT32 AGESA_STATUS
+ */
+AGESA_STATUS
+CreateAcpiCdit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT VOID **CditPtr
+ )
+{
+ AGESA_TESTPOINT (TpProcCpuEntryCdit, StdHeader);
+ return ((*(OptionCditConfiguration.CditFeature)) (StdHeader, PlatformConfig, CditPtr));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This is the default routine for use when the CDIT option is NOT requested.
+ *
+ * The option install process will create and fill the transfer vector with
+ * the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[out] CditPtr Point to Cdit Struct including buffer address and length
+ *
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GetAcpiCditStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT VOID **CditPtr
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function generates a complete CDIT table into a memory buffer.
+ * After completion, this table must be set by the system BIOS into its
+ * internal ACPI namespace, and linked into the RSDT/XSDT
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[out] CditPtr Point to Cdit Struct including buffer address and length
+ *
+ * @retval UINT32 AGESA_STATUS
+ */
+AGESA_STATUS
+GetAcpiCditMain (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT VOID **CditPtr
+ )
+{
+ UINT8 MaxHops;
+ UINT8 DomainNum;
+ UINT8 i;
+ UINT8 j;
+ UINT8 *BufferPtr;
+ UINT8 *SocketTopologyDataPtr;
+ UINT8 *SocketTopologyPtr;
+ UINT32 Socket;
+ BOOLEAN IsProbeFilterEnabled;
+ ACPI_TABLE_HEADER *CpuCditHeaderStructPtr;
+ AGESA_STATUS Flag;
+ ALLOCATE_HEAP_PARAMS AllocStruct;
+ L3_FEATURE_FAMILY_SERVICES *FamilyServices;
+
+ MaxHops = 0;
+ SocketTopologyPtr = NULL;
+ Flag = AGESA_ERROR;
+ IsProbeFilterEnabled = FALSE;
+
+ // find out the pointer to the BufferHandle which contains
+ // Node Topology information
+ AcpiCditHBufferFind (StdHeader, &SocketTopologyPtr);
+ if (SocketTopologyPtr == NULL) {
+ return (Flag);
+ }
+
+ DomainNum = *SocketTopologyPtr;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " CDIT is created\n");
+
+ // create a buffer by calling IBV callout routine
+ AllocStruct.RequestedBufferSize = (DomainNum * DomainNum) + AMD_ACPI_CDIT_NUM_DOMAINS_LENGTH + sizeof (ACPI_TABLE_HEADER);
+ AllocStruct.BufferHandle = AMD_ACPI_CDIT_BUFFER_HANDLE;
+ AllocStruct.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocStruct, StdHeader) != AGESA_SUCCESS) {
+ return (Flag);
+ }
+ *CditPtr = AllocStruct.BufferPtr;
+
+ //CDIT header
+ LibAmdMemCopy (*CditPtr, (VOID *) &CpuCditHdrStruct, (UINTN) (sizeof (ACPI_TABLE_HEADER)), StdHeader);
+ CpuCditHeaderStructPtr = (ACPI_TABLE_HEADER *) *CditPtr;
+ CpuCditHeaderStructPtr->TableLength = (UINT32) AllocStruct.RequestedBufferSize;
+ // Update table OEM fields.
+ LibAmdMemCopy ((VOID *) &CpuCditHeaderStructPtr->OemId, (VOID *) &OptionCditConfiguration.OemIdString,
+ sizeof (OptionCditConfiguration.OemIdString), StdHeader);
+ LibAmdMemCopy ((VOID *) &CpuCditHeaderStructPtr->OemTableId, (VOID *) &OptionCditConfiguration.OemTableIdString,
+ sizeof (OptionCditConfiguration.OemTableIdString), StdHeader);
+ BufferPtr = *CditPtr;
+
+ Flag = AGESA_SUCCESS;
+ // CDIT body
+ // Check if Probe Filter is enabled
+ if (IsFeatureEnabled (L3Features, PlatformConfig, StdHeader)) {
+ IsProbeFilterEnabled = TRUE;
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ GetFeatureServicesOfSocket (&L3FeatureFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+ if ((FamilyServices == NULL) || (!FamilyServices->IsHtAssistSupported (FamilyServices, PlatformConfig, StdHeader))) {
+ IsProbeFilterEnabled = FALSE;
+ break;
+ }
+ }
+ }
+ }
+
+
+ if (!IsProbeFilterEnabled) {
+ // probe filter is disabled
+ // get MaxHops
+ SocketTopologyDataPtr = SocketTopologyPtr + sizeof (DomainNum);
+ for (i = 0; i < DomainNum; i++) {
+ for (j = 0; j < DomainNum; j++) {
+ if (*SocketTopologyDataPtr > MaxHops) {
+ MaxHops = *SocketTopologyDataPtr;
+ }
+ SocketTopologyDataPtr++;
+ }
+ }
+
+ // the Max hop entries have a value of 13
+ // and all other entries have 10.
+ SocketTopologyDataPtr = SocketTopologyPtr + sizeof (DomainNum);
+ for (i = 0; i < DomainNum; i++) {
+ for (j = 0; j < DomainNum; j++) {
+ if (*SocketTopologyDataPtr++ == MaxHops) {
+ *(BufferPtr + sizeof (ACPI_TABLE_HEADER) +
+ AMD_ACPI_CDIT_NUM_DOMAINS_LENGTH + (i * DomainNum) + j) = 13;
+ } else {
+ *(BufferPtr + sizeof (ACPI_TABLE_HEADER) +
+ AMD_ACPI_CDIT_NUM_DOMAINS_LENGTH + (i * DomainNum) + j) = 10;
+ }
+ }
+ }
+ } else {
+ // probe filter is enabled
+ // formula : num_hops * 6 + 10
+ SocketTopologyDataPtr = SocketTopologyPtr + sizeof (DomainNum);
+ for (i = 0; i < DomainNum; i++) {
+ for (j = 0; j < DomainNum; j++) {
+ *(BufferPtr + sizeof (ACPI_TABLE_HEADER) +
+ AMD_ACPI_CDIT_NUM_DOMAINS_LENGTH + (i * DomainNum) + j) =
+ ((*SocketTopologyDataPtr++) * 6) + 10;
+ }
+ }
+ }
+
+ BufferPtr += sizeof (ACPI_TABLE_HEADER);
+ *((UINT32 *) BufferPtr) = (UINT32) DomainNum;
+
+ //Update CDIT header Checksum
+ ChecksumAcpiTable ((ACPI_TABLE_HEADER *) *CditPtr, StdHeader);
+
+ return (Flag);
+}
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Find out the pointer to the BufferHandle which contains
+ * Node Topology information
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in] SocketTopologyPtr Point to the address of Socket Topology
+ *
+ */
+VOID
+STATIC
+AcpiCditHBufferFind (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT8 **SocketTopologyPtr
+ )
+{
+ LOCATE_HEAP_PTR LocateBuffer;
+
+ LocateBuffer.BufferHandle = HOP_COUNT_TABLE_HANDLE;
+ if (HeapLocateBuffer (&LocateBuffer, StdHeader) == AGESA_SUCCESS) {
+ *SocketTopologyPtr = (UINT8 *) LocateBuffer.BufferPtr;
+ }
+
+ return;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCoreLeveling.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCoreLeveling.c
new file mode 100644
index 0000000..b00e979
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCoreLeveling.c
@@ -0,0 +1,374 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Core Leveling Function.
+ *
+ * Contains code to Level the number of core in a multi-socket system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "AMD.h"
+#include "Topology.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFeatures.h"
+#include "cpuEarlyInit.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+#define FILECODE PROC_CPU_FEATURE_CPUCORELEVELING_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE CoreLevelingFamilyServiceTable;
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+CoreLevelingAtEarly (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * P U B L I C F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Should core leveling be enabled
+ *
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE core leveling is supported.
+ * @retval FALSE core leveling cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsCoreLevelingEnabled (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CORE_LEVELING_TYPE CoreLevelMode;
+
+ CoreLevelMode = (CORE_LEVELING_TYPE) PlatformConfig->CoreLevelingMode;
+ if (CoreLevelMode != CORE_LEVEL_NONE) {
+ return (TRUE);
+ } else {
+ return (FALSE);
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Performs core leveling for the system.
+ *
+ * This function implements the AMD_CPU_EARLY_PARAMS.CoreLevelingMode parameter.
+ * The possible modes are:
+ * -0 CORE_LEVEL_LOWEST Level to lowest common denominator
+ * -1 CORE_LEVEL_TWO Level to 2 cores
+ * -2 CORE_LEVEL_POWER_OF_TWO Level to 1,2,4 or 8
+ * -3 CORE_LEVEL_NONE Do no leveling
+ * -4 CORE_LEVEL_COMPUTE_UNIT Level cores to one core per compute unit
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the leveling mode parameter
+ * @param[in] StdHeader Config handle for library and services
+ *
+ * @return The most severe status of any family specific service.
+ *
+ */
+AGESA_STATUS
+CoreLevelingAtEarly (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 CoreNumPerComputeUnit;
+ UINT32 MinNumOfComputeUnit;
+ UINT32 EnabledComputeUnit;
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 NumberOfSockets;
+ UINT32 NumberOfModules;
+ UINT32 MinCoreCountOnNode;
+ UINT32 MaxCoreCountOnNode;
+ UINT32 LowCore;
+ UINT32 HighCore;
+ UINT32 LeveledCores;
+ UINT32 RequestedCores;
+ UINT32 TotalEnabledCoresOnNode;
+ BOOLEAN RegUpdated;
+ AP_MAIL_INFO ApMailboxInfo;
+ CORE_LEVELING_TYPE CoreLevelMode;
+ CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices;
+ WARM_RESET_REQUEST Request;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, "CoreLevelingAtEarly\n CoreLevelMode: %d\n", PlatformConfig->CoreLevelingMode);
+
+ MaxCoreCountOnNode = 0;
+ MinCoreCountOnNode = 0xFFFFFFFF;
+ LeveledCores = 0;
+ CoreNumPerComputeUnit = 1;
+ MinNumOfComputeUnit = 0xFF;
+
+ ASSERT (PlatformConfig->CoreLevelingMode < CoreLevelModeMax);
+
+ // Get OEM IO core level mode
+ CoreLevelMode = (CORE_LEVELING_TYPE) PlatformConfig->CoreLevelingMode;
+
+ // Get socket count
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+ GetApMailbox (&ApMailboxInfo.Info, StdHeader);
+ NumberOfModules = ApMailboxInfo.Fields.ModuleType + 1;
+
+ // Collect cpu core info
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ for (Module = 0; Module < NumberOfModules; Module++) {
+ if (GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader)) {
+ // Get the highest and lowest core count in all nodes
+ TotalEnabledCoresOnNode = HighCore - LowCore + 1;
+ if (TotalEnabledCoresOnNode < MinCoreCountOnNode) {
+ MinCoreCountOnNode = TotalEnabledCoresOnNode;
+ }
+ if (TotalEnabledCoresOnNode > MaxCoreCountOnNode) {
+ MaxCoreCountOnNode = TotalEnabledCoresOnNode;
+ }
+ EnabledComputeUnit = TotalEnabledCoresOnNode;
+ switch (GetComputeUnitMapping (StdHeader)) {
+ case AllCoresMapping:
+ // All cores are in their own compute unit.
+ break;
+ case EvenCoresMapping:
+ // Cores are paired in compute units.
+ CoreNumPerComputeUnit = 2;
+ EnabledComputeUnit = (TotalEnabledCoresOnNode / 2);
+ break;
+ case TripleCoresMapping:
+ // Three cores are grouped in compute units.
+ CoreNumPerComputeUnit = 3;
+ EnabledComputeUnit = (TotalEnabledCoresOnNode / 3);
+ break;
+ case QuadCoresMapping:
+ // Four cores are grouped in compute units.
+ CoreNumPerComputeUnit = 4;
+ EnabledComputeUnit = (TotalEnabledCoresOnNode / 4);
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ // Get minimum of compute unit. This will either be the minimum number of cores (AllCoresMapping),
+ // or less (EvenCoresMapping).
+ if (EnabledComputeUnit < MinNumOfComputeUnit) {
+ MinNumOfComputeUnit = EnabledComputeUnit;
+ }
+ IDS_HDT_CONSOLE (CPU_TRACE, " Socket %d Module %d MaxCoreCountOnNode %d MinCoreCountOnNode %d TotalEnabledCoresOnNode %d EnabledComputeUnit %d MinNumOfComputeUnit %d\n", \
+ Socket, Module, MaxCoreCountOnNode, MinCoreCountOnNode, TotalEnabledCoresOnNode, EnabledComputeUnit, MinNumOfComputeUnit);
+ }
+ }
+ }
+ }
+
+ // Get LeveledCores
+ switch (CoreLevelMode) {
+ case CORE_LEVEL_LOWEST:
+ if (MinCoreCountOnNode == MaxCoreCountOnNode) {
+ return (AGESA_SUCCESS);
+ }
+ LeveledCores = (MinCoreCountOnNode / CoreNumPerComputeUnit) * CoreNumPerComputeUnit;
+ break;
+ case CORE_LEVEL_TWO:
+ LeveledCores = 2 / NumberOfModules;
+ if (LeveledCores != 0) {
+ LeveledCores = (LeveledCores <= MinCoreCountOnNode) ? LeveledCores : MinCoreCountOnNode;
+ } else {
+ return (AGESA_WARNING);
+ }
+ if ((LeveledCores * NumberOfModules) != 2) {
+ PutEventLog (
+ AGESA_WARNING,
+ CPU_WARNING_ADJUSTED_LEVELING_MODE,
+ 2, (LeveledCores * NumberOfModules), 0, 0, StdHeader
+ );
+ }
+ break;
+ case CORE_LEVEL_POWER_OF_TWO:
+ // Level to power of 2 (1, 2, 4, 8...)
+ LeveledCores = 1;
+ while (MinCoreCountOnNode >= (LeveledCores * 2)) {
+ LeveledCores = LeveledCores * 2;
+ }
+ break;
+ case CORE_LEVEL_COMPUTE_UNIT:
+ case CORE_LEVEL_COMPUTE_UNIT_TWO:
+ case CORE_LEVEL_COMPUTE_UNIT_THREE:
+ // Level cores to 1~3 core(s) per compute unit, with additional reduction to level
+ // all processors to match the processor with the minimum number of cores.
+ if (CoreNumPerComputeUnit == 1) {
+ // If there is one core per compute unit, this is the same as CORE_LEVEL_LOWEST.
+ if (MinCoreCountOnNode == MaxCoreCountOnNode) {
+ return (AGESA_SUCCESS);
+ }
+ LeveledCores = MinCoreCountOnNode;
+ } else {
+ // If there are more than one core per compute unit, level to the number of compute units * cores per compute unit.
+ LeveledCores = MinNumOfComputeUnit * (CoreLevelMode - CORE_LEVEL_COMPUTE_UNIT + 1);
+ }
+ break;
+ case CORE_LEVEL_ONE:
+ LeveledCores = 1;
+ if (NumberOfModules > 1) {
+ PutEventLog (
+ AGESA_WARNING,
+ CPU_WARNING_ADJUSTED_LEVELING_MODE,
+ 1, NumberOfModules, 0, 0, StdHeader
+ );
+ }
+ break;
+ case CORE_LEVEL_THREE:
+ case CORE_LEVEL_FOUR:
+ case CORE_LEVEL_FIVE:
+ case CORE_LEVEL_SIX:
+ case CORE_LEVEL_SEVEN:
+ case CORE_LEVEL_EIGHT:
+ case CORE_LEVEL_NINE:
+ case CORE_LEVEL_TEN:
+ case CORE_LEVEL_ELEVEN:
+ case CORE_LEVEL_TWELVE:
+ case CORE_LEVEL_THIRTEEN:
+ case CORE_LEVEL_FOURTEEN:
+ case CORE_LEVEL_FIFTEEN:
+ // MCM processors can not have an odd number of cores. For an odd CORE_LEVEL_N, MCM processors will be
+ // leveled as though CORE_LEVEL_N+1 was chosen.
+ // Processors with compute units disable all cores in an entire compute unit at a time, or on an MCM processor,
+ // two compute units at a time. For example, on an SCM processor with two cores per compute unit, the effective
+ // explicit levels are CORE_LEVEL_ONE, CORE_LEVEL_TWO, CORE_LEVEL_FOUR, CORE_LEVEL_SIX, and
+ // CORE_LEVEL_EIGHT. The same example for an MCM processor with two cores per compute unit has effective
+ // explicit levels of CORE_LEVEL_TWO, CORE_LEVEL_FOUR, CORE_LEVEL_EIGHT, and CORE_LEVEL_TWELVE.
+ RequestedCores = CoreLevelMode - CORE_LEVEL_THREE + 3;
+ LeveledCores = (RequestedCores + NumberOfModules - 1) / NumberOfModules;
+ LeveledCores = (LeveledCores / CoreNumPerComputeUnit) * CoreNumPerComputeUnit;
+ LeveledCores = (LeveledCores <= MinCoreCountOnNode) ? LeveledCores : MinCoreCountOnNode;
+ if (LeveledCores != 1) {
+ LeveledCores = (LeveledCores / CoreNumPerComputeUnit) * CoreNumPerComputeUnit;
+ }
+ if ((LeveledCores * NumberOfModules * CoreNumPerComputeUnit) != RequestedCores) {
+ PutEventLog (
+ AGESA_WARNING,
+ CPU_WARNING_ADJUSTED_LEVELING_MODE,
+ RequestedCores, (LeveledCores * NumberOfModules * CoreNumPerComputeUnit), 0, 0, StdHeader
+ );
+ }
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+
+ // Set down core register
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ GetFeatureServicesOfSocket (&CoreLevelingFamilyServiceTable, Socket, (CONST VOID **)&FamilySpecificServices, StdHeader);
+ if (FamilySpecificServices != NULL) {
+ for (Module = 0; Module < NumberOfModules; Module++) {
+ IDS_HDT_CONSOLE (CPU_TRACE, " SetDownCoreRegister: Socket %d Module %d LeveledCores %d CoreLevelMode %d\n", Socket, Module, LeveledCores, CoreLevelMode);
+ RegUpdated = FamilySpecificServices->SetDownCoreRegister (FamilySpecificServices, &Socket, &Module, &LeveledCores, CoreLevelMode, StdHeader);
+ // If the down core register is updated, trigger a warm reset.
+ if (RegUpdated) {
+ GetWarmResetFlag (StdHeader, &Request);
+ Request.RequestBit = TRUE;
+ Request.StateBits = Request.PostStage - 1;
+ IDS_HDT_CONSOLE (CPU_TRACE, " Request a warm reset.\n");
+ SetWarmResetFlag (StdHeader, &Request);
+ }
+ }
+ }
+ }
+ }
+
+ return (AGESA_SUCCESS);
+}
+
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCoreLeveling =
+{
+ CoreLeveling,
+ (CPU_FEAT_AFTER_PM_INIT),
+ IsCoreLevelingEnabled,
+ CoreLevelingAtEarly
+};
+
+/*----------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCpb.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCpb.c
new file mode 100644
index 0000000..0745452
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCpb.c
@@ -0,0 +1,175 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Core performance boost feature support code.
+ *
+ * Contains code that declares the AGESA CPU CPB related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFeatures.h"
+#include "cpuCpb.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_FEATURE_CPUCPB_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE CpbFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Should CPB be enabled
+ *
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE CPB is supported.
+ * @retval FALSE CPB cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsCpbFeatureEnabled (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ BOOLEAN IsEnabled;
+ CPB_FAMILY_SERVICES *FamilyServices;
+
+ IsEnabled = FALSE;
+
+ ASSERT (PlatformConfig->CpbMode < MaxCpbMode);
+
+ if (PlatformConfig->CpbMode == CpbModeAuto) {
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ GetFeatureServicesOfSocket (&CpbFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+ if (FamilyServices != NULL) {
+ if (FamilyServices->IsCpbSupported (FamilyServices, PlatformConfig, Socket, StdHeader)) {
+ IsEnabled = TRUE;
+ break;
+ }
+ }
+ }
+ }
+ }
+ return IsEnabled;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Enable core performance boost
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeCpbFeature (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS CalledStatus;
+ CPB_FAMILY_SERVICES *FamilyServices;
+
+ AgesaStatus = AGESA_SUCCESS;
+ CalledStatus = AGESA_SUCCESS;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " Boost is enabled\n");
+
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ GetFeatureServicesOfSocket (&CpbFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+ if (FamilyServices != NULL) {
+ if (FamilyServices->IsCpbSupported (FamilyServices, PlatformConfig, Socket, StdHeader)) {
+ CalledStatus = FamilyServices->EnableCpbOnSocket (FamilyServices, PlatformConfig, EntryPoint, Socket, StdHeader);
+ if (CalledStatus > AgesaStatus) {
+ AgesaStatus = CalledStatus;
+ }
+ }
+ }
+ }
+ }
+
+ return AgesaStatus;
+}
+
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureCpb =
+{
+ CoreBoost,
+ (CPU_FEAT_AFTER_PM_INIT | CPU_FEAT_INIT_LATE_END | CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_S3_LATE_RESTORE_END | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+ IsCpbFeatureEnabled,
+ InitializeCpbFeature
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCpb.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCpb.h
new file mode 100644
index 0000000..dd3e359
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCpb.h
@@ -0,0 +1,133 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Core Performance Boost Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU CPB related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_CPB_H_
+#define _CPU_CPB_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (CPB_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if CPB is supported.
+ *
+ * @param[in] CpbServices Core Performance Boost services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] Socket Zero-based socket number.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE CPB is supported.
+ * @retval FALSE CPB is not supported.
+ *
+ */
+typedef BOOLEAN F_CPB_IS_SUPPORTED (
+ IN CPB_FAMILY_SERVICES *CpbServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPB_IS_SUPPORTED *PF_CPB_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to enable CPB.
+ *
+ * @param[in] CpbServices Core Performance Boost services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] Socket Zero-based socket number.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_CPB_INIT (
+ IN CPB_FAMILY_SERVICES *CpbServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN UINT64 EntryPoint,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPB_INIT *PF_CPB_INIT;
+
+/**
+ * Provide the interface to the CPB Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _CPB_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_CPB_IS_SUPPORTED IsCpbSupported; ///< Method: Family specific call to check if CPB is supported.
+ PF_CPB_INIT EnableCpbOnSocket; ///< Method: Family specific call to enable CPB.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N S P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _CPU_CPB_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCrat.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCrat.c
new file mode 100644
index 0000000..552713d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCrat.c
@@ -0,0 +1,513 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CRAT, ACPI table related API functions.
+ *
+ * Contains code that Create the APCI CRAT Table after early reset.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/FEATURE
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ***************************************************************************/
+
+
+/*----------------------------------------------------------------------------
+ * This file provides functions, that will generate CRAT tables
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuServices.h"
+#include "OptionCrat.h"
+#include "cpuCrat.h"
+#include "mfCrat.h"
+#include "heapManager.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuLateInit.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FEATURE_CPUCRAT_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_CRAT_CONFIGURATION OptionCratConfiguration; // global user config record
+extern CPU_FAMILY_SUPPORT_TABLE CratFamilyServiceTable;
+extern S_MAKE_CRAT_ENTRY MakeCratEntryTable[];
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GetAcpiCratStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ OUT VOID **CratPtr
+ );
+
+AGESA_STATUS
+GetAcpiCratMain (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ OUT VOID **CratPtr
+ );
+
+/*----------------------------------------------------------------------------
+ * All of the DATA should be defined in _CODE segment.
+ * Use ROMDATA to specify that it belongs to _CODE.
+ *----------------------------------------------------------------------------
+ */
+CONST UINT8 ROMDATA L2L3Associativity[] =
+{
+ 0,
+ 1,
+ 2,
+ 0,
+ 4,
+ 0,
+ 8,
+ 0,
+ 16,
+ 0,
+ 32,
+ 48,
+ 64,
+ 96,
+ 128,
+ 0xFF
+};
+
+STATIC CRAT_HEADER ROMDATA CratHeaderStruct =
+{
+ {'C','R','A','T'},
+ 0,
+ 1,
+ 0,
+ {0},
+ {0},
+ 1,
+ {'A','M','D',' '},
+ 1,
+ 0,
+ 0,
+ {0, 0, 0, 0, 0, 0}
+};
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function will generate a complete Component Resource Affinity Table
+ * i.e. CRAT into a memory buffer. After completion, this table must be set
+ * by the system BIOS into its internal ACPI name space.
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[out] CratPtr Point to Crat Struct including buffer address and length
+ *
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+CreateAcpiCrat (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ OUT VOID **CratPtr
+ )
+{
+ AGESA_TESTPOINT (TpProcCpuEntryCrat, StdHeader);
+ return ((*(OptionCratConfiguration.CratFeature)) (StdHeader, CratPtr));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This is the default routine for use when the CRAT option is NOT requested.
+ *
+ * The option install process will create and fill the transfer vector with
+ * the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[out] CratPtr Point to Crat Struct including buffer address and length
+ *
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GetAcpiCratStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ OUT VOID **CratPtr
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function will generate a complete Component Resource Affinity Table
+ * i.e. CRAT into a memory buffer. After completion, this table must be set
+ * by the system BIOS into its internal ACPI name space.
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[out] CratPtr Point to Crat Struct including buffer address and length
+ *
+ * @retval AGESA_STATUS
+ */
+AGESA_STATUS
+GetAcpiCratMain (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ OUT VOID **CratPtr
+ )
+{
+ UINT8 i;
+ UINT8 *TableEnd;
+ CRAT_HEADER *CratHeaderStructPtr;
+ ALLOCATE_HEAP_PARAMS AllocParams;
+
+ // Allocate a buffer
+ AllocParams.RequestedBufferSize = CRAT_MAX_LENGTH;
+ AllocParams.BufferHandle = AMD_CRAT_INFO_BUFFER_HANDLE;
+ AllocParams.Persist = HEAP_SYSTEM_MEM;
+
+ if (HeapAllocateBuffer (&AllocParams, StdHeader) != AGESA_SUCCESS) {
+ return AGESA_ERROR;
+ }
+ *CratPtr = AllocParams.BufferPtr;
+
+
+ CratHeaderStructPtr = (CRAT_HEADER *) *CratPtr;
+ TableEnd = (UINT8 *) *CratPtr;
+
+ // Copy CratHeaderStruct -> data buffer
+ LibAmdMemCopy ((VOID *) CratHeaderStructPtr, (VOID *) &CratHeaderStruct, (UINTN) (sizeof (CRAT_HEADER)), StdHeader);
+ // Update table OEM fields.
+ LibAmdMemCopy ((VOID *) &CratHeaderStructPtr->OemId, (VOID *) &OptionCratConfiguration.OemIdString,
+ sizeof (OptionCratConfiguration.OemIdString), StdHeader);
+ LibAmdMemCopy ((VOID *) &CratHeaderStructPtr->OemTableId, (VOID *) &OptionCratConfiguration.OemTableIdString,
+ sizeof (OptionCratConfiguration.OemTableIdString), StdHeader);
+
+ TableEnd += sizeof (CRAT_HEADER);
+
+ // Make all CRAT entries.
+ for (i = 0; MakeCratEntryTable[i].MakeCratEntry != NULL; i++) {
+ MakeCratEntryTable[i].MakeCratEntry (CratHeaderStructPtr, &TableEnd, StdHeader);
+
+ }
+
+ // Store size in table (current buffer offset - buffer start offset)
+ CratHeaderStructPtr->Length = (UINT32) (TableEnd - (UINT8 *) CratHeaderStructPtr);
+
+ //Update SSDT header Checksum
+ ChecksumAcpiTable ((ACPI_TABLE_HEADER *) CratHeaderStructPtr, StdHeader);
+ IDS_HDT_CONSOLE (CPU_TRACE, " CRAT is created\n");
+ return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will add HSA Processing Unit entry.
+ *
+ * @param[in] CratHeaderStructPtr CRAT header pointer
+ * @param[in, out] TableEnd The end of CRAT
+ * @param[in, out] StdHeader Standard Head Pointer
+ *
+ */
+VOID
+MakeHSAProcUnitEntry (
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 NodeNum;
+ UINT8 NodeCount;
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 LowCore;
+ UINT32 HighCore;
+ UINT32 RegVal;
+ CRAT_HSA_PROCESSING_UNIT *EntryPtr;
+ AMD_APIC_PARAMS ApicParams;
+ PCI_ADDR PciAddress;
+
+ // Get Node count
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, LOW_NODE_DEVICEID, FUNC_0, 0x60);
+ LibAmdPciRead (AccessWidth32 , PciAddress, &RegVal, StdHeader);
+ NodeCount = (UINT8) (((RegVal >> 4) & 0x7) + 1);
+
+ NodeNum = 0;
+ ApicParams.StdHeader = *StdHeader;
+ while (NodeNum < NodeCount) {
+ GetSocketModuleOfNode ((UINT32) NodeNum, &Socket, &Module, StdHeader);
+ GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader);
+ ApicParams.Socket = (UINT8) Socket;
+ ApicParams.Core = 0;
+ AmdGetApicId (&ApicParams);
+ if (ApicParams.IsPresent) {
+ // Adding one CRAT entry for every node
+ EntryPtr = (CRAT_HSA_PROCESSING_UNIT *) AddOneCratEntry (CRAT_TYPE_HSA_PROC_UNIT, CratHeaderStructPtr, TableEnd, StdHeader);
+
+ EntryPtr->ProximityDomain = NodeNum;
+ EntryPtr->ProcessorIdLow = ApicParams.ApicAddress;
+ EntryPtr->NumCPUCores = (UINT16) (HighCore - LowCore + 1);
+ EntryPtr->Flags.Enabled = 1;
+ EntryPtr->Flags.CpuPresent = 1;
+ }
+ /// @todo SimdCount SimdWidth IoCount
+ CratHeaderStructPtr->NumDomains++;
+ NodeNum++;
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will add memory entry.
+ *
+ * @param[in] CratHeaderStructPtr CRAT header pointer
+ * @param[in, out] TableEnd The end of CRAT
+ * @param[in, out] StdHeader Standard Head Pointer
+ *
+ */
+VOID
+MakeMemoryEntry (
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 EntryNum;
+ UINT8 NumOfMemAffinityInfoEntries;
+ UINT32 Width;
+ AGESA_STATUS AgesaStatus;
+ CRAT_MEMORY *EntryPtr;
+ LOCATE_HEAP_PTR LocateHeapParams;
+ CRAT_MEMORY_AFFINITY_INFO_HEADER *MemAffinityInfoHeaderPtr;
+ CRAT_MEMORY_AFFINITY_INFO_ENTRY *MemAffinityInfoEntryPtr;
+
+ EntryNum = 0;
+
+ // Get the CRAT memory affinity info from heap
+ LocateHeapParams.BufferHandle = AMD_MEM_CRAT_INFO_BUFFER_HANDLE;
+ AgesaStatus = HeapLocateBuffer (&LocateHeapParams, StdHeader);
+ if (AgesaStatus != AGESA_SUCCESS) {
+ ASSERT (FALSE);
+ } else {
+ MemAffinityInfoHeaderPtr = (CRAT_MEMORY_AFFINITY_INFO_HEADER *) (LocateHeapParams.BufferPtr);
+ MemAffinityInfoHeaderPtr ++;
+ MemAffinityInfoEntryPtr = (CRAT_MEMORY_AFFINITY_INFO_ENTRY *) MemAffinityInfoHeaderPtr;
+ MemAffinityInfoHeaderPtr --;
+
+ // Get the number of CRAT memory affinity entries
+ NumOfMemAffinityInfoEntries = MemAffinityInfoHeaderPtr->NumOfMemAffinityInfoEntries;
+ Width = MemAffinityInfoHeaderPtr->MemoryWidth;
+
+ // Create CRAT memory affinity entries
+ IDS_HDT_CONSOLE (MAIN_FLOW, " CRAT memory affinity entries\n");
+ while (EntryNum < NumOfMemAffinityInfoEntries) {
+ // Add one CRAT memory entry
+ EntryPtr = (CRAT_MEMORY *) AddOneCratEntry (CRAT_TYPE_MEMORY, CratHeaderStructPtr, TableEnd, StdHeader);
+ EntryPtr->Flags.Enabled = 1;
+ EntryPtr->ProximityDomain = MemAffinityInfoEntryPtr->Domain;
+ EntryPtr->BaseAddressLow = MemAffinityInfoEntryPtr->BaseAddressLow;
+ EntryPtr->BaseAddressHigh = MemAffinityInfoEntryPtr->BaseAddressHigh;
+ EntryPtr->LengthLow = MemAffinityInfoEntryPtr->LengthLow;
+ EntryPtr->LengthHigh = MemAffinityInfoEntryPtr->LengthHigh;
+ EntryPtr->Width = Width;
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Entry #%d\n", EntryNum);
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Type: 0x%08x\n", EntryPtr->Type);
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Length: 0x%08x\n", EntryPtr->Length);
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Flags: %s %s %s\n", (EntryPtr->Flags.Enabled == 1) ? "Enabled" : "",
+ (EntryPtr->Flags.HotPluggable == 1) ? "EnHotPluggableabled" : "",
+ (EntryPtr->Flags.NonVolatile == 1) ? "NonVolatile" : ""
+ );
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Proximity Domain: 0x%08x\n", EntryPtr->ProximityDomain);
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Base Address Low: 0x%08x\n", EntryPtr->BaseAddressLow);
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Base Address High: 0x%08x\n", EntryPtr->BaseAddressHigh);
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Length Low: 0x%08x\n", EntryPtr->LengthLow);
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Length High: 0x%08x\n", EntryPtr->LengthHigh);
+ IDS_HDT_CONSOLE (MAIN_FLOW, " Width: 0x%08x\n", EntryPtr->Width);
+ MemAffinityInfoEntryPtr ++;
+ EntryNum ++;
+ }
+ HeapDeallocateBuffer ((UINT32) AMD_MEM_CRAT_INFO_BUFFER_HANDLE, StdHeader);
+ }
+
+ return;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will add cache entry.
+ *
+ * @param[in] CratHeaderStructPtr CRAT header pointer
+ * @param[in, out] TableEnd The end of CRAT
+ * @param[in, out] StdHeader Standard Head Pointer
+ *
+ */
+VOID
+MakeCacheEntry (
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CRAT_FAMILY_SERVICES *CratFamilyServices;
+
+ GetFeatureServicesOfSocket (&CratFamilyServiceTable, 0, (CONST VOID **)&CratFamilyServices, StdHeader);
+ CratFamilyServices->generateCratCacheEntry (CratHeaderStructPtr, TableEnd, StdHeader);
+ return;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will add TLB entry.
+ *
+ * @param[in] CratHeaderStructPtr CRAT header pointer
+ * @param[in, out] TableEnd The end of CRAT
+ * @param[in, out] StdHeader Standard Head Pointer
+ *
+ */
+VOID
+MakeTLBEntry (
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CRAT_FAMILY_SERVICES *CratFamilyServices;
+
+ GetFeatureServicesOfSocket (&CratFamilyServiceTable, 0, (CONST VOID **)&CratFamilyServices, StdHeader);
+ CratFamilyServices->generateCratTLBEntry (CratHeaderStructPtr, TableEnd, StdHeader);
+ return;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will add CRAT entry.
+ *
+ * @param[in] CratEntryType CRAT entry type
+ * @param[in] CratHeaderStructPtr CRAT header pointer
+ * @param[in, out] TableEnd The end of CRAT
+ * @param[in, out] StdHeader Standard Head Pointer
+ *
+ */
+UINT8 *
+AddOneCratEntry (
+ IN CRAT_ENTRY_TYPE CratEntryType,
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *CurrentEntry;
+
+ CurrentEntry = *TableEnd;
+ CratHeaderStructPtr->TotalEntries++;
+ switch (CratEntryType) {
+ case CRAT_TYPE_HSA_PROC_UNIT:
+ *TableEnd += sizeof (CRAT_HSA_PROCESSING_UNIT);
+ ASSERT ((*TableEnd - (UINT8 *) CratHeaderStructPtr) <= CRAT_MAX_LENGTH);
+ CratHeaderStructPtr->Length += sizeof (CRAT_HSA_PROCESSING_UNIT);
+ ((CRAT_HSA_PROCESSING_UNIT *) CurrentEntry)->Type = (UINT8) CratEntryType;
+ ((CRAT_HSA_PROCESSING_UNIT *) CurrentEntry)->Length = sizeof (CRAT_HSA_PROCESSING_UNIT);
+ break;
+ case CRAT_TYPE_MEMORY:
+ *TableEnd += sizeof (CRAT_MEMORY);
+ ASSERT ((*TableEnd - (UINT8 *) CratHeaderStructPtr) <= CRAT_MAX_LENGTH);
+ CratHeaderStructPtr->Length += sizeof (CRAT_MEMORY);
+ ((CRAT_MEMORY *) CurrentEntry)->Type = (UINT8) CratEntryType;
+ ((CRAT_MEMORY *) CurrentEntry)->Length = sizeof (CRAT_MEMORY);
+ break;
+ case CRAT_TYPE_CACHE:
+ *TableEnd += sizeof (CRAT_CACHE);
+ ASSERT ((*TableEnd - (UINT8 *) CratHeaderStructPtr) <= CRAT_MAX_LENGTH);
+ CratHeaderStructPtr->Length += sizeof (CRAT_CACHE);
+ ((CRAT_CACHE *) CurrentEntry)->Type = (UINT8) CratEntryType;
+ ((CRAT_CACHE *) CurrentEntry)->Length = sizeof (CRAT_CACHE);
+ break;
+ case CRAT_TYPE_TLB:
+ *TableEnd += sizeof (CRAT_TLB);
+ ASSERT ((*TableEnd - (UINT8 *) CratHeaderStructPtr) <= CRAT_MAX_LENGTH);
+ CratHeaderStructPtr->Length += sizeof (CRAT_TLB);
+ ((CRAT_TLB *) CurrentEntry)->Type = (UINT8) CratEntryType;
+ ((CRAT_TLB *) CurrentEntry)->Length = sizeof (CRAT_TLB);
+ break;
+ case CRAT_TYPE_FPU:
+ *TableEnd += sizeof (CRAT_FPU);
+ ASSERT ((*TableEnd - (UINT8 *) CratHeaderStructPtr) <= CRAT_MAX_LENGTH);
+ CratHeaderStructPtr->Length += sizeof (CRAT_FPU);
+ ((CRAT_FPU *) CurrentEntry)->Type = (UINT8) CratEntryType;
+ ((CRAT_FPU *) CurrentEntry)->Length = sizeof (CRAT_FPU);
+ break;
+ case CRAT_TYPE_IO:
+ *TableEnd += sizeof (CRAT_IO);
+ ASSERT ((*TableEnd - (UINT8 *) CratHeaderStructPtr) <= CRAT_MAX_LENGTH);
+ CratHeaderStructPtr->Length += sizeof (CRAT_IO);
+ ((CRAT_IO *) CurrentEntry)->Type = (UINT8) CratEntryType;
+ ((CRAT_IO *) CurrentEntry)->Length = sizeof (CRAT_IO);
+ break;
+ default:
+ ASSERT (FALSE);
+ break;
+ }
+ return CurrentEntry;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCrat.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCrat.h
new file mode 100644
index 0000000..6b2b9d6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCrat.h
@@ -0,0 +1,85 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU CRAT
+ *
+ * Contains code that declares the AGESA CRAT related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_CRAT_H_
+#define _CPU_CRAT_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Make CRAT entry
+ *
+ * @param[in] CratHeaderStructPtr CRAT header pointer
+ * @param[in, out] TableEnd The end of CRAT
+ * @param[in, out] StdHeader Standard Head Pointer
+ *
+ */
+typedef VOID F_MAKE_CRAT_ENTRY (
+ IN CRAT_HEADER *CratHeaderStructPtr,
+ IN OUT UINT8 **TableEnd,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+/// Reference to a Method.
+typedef F_MAKE_CRAT_ENTRY *PF_MAKE_CRAT_ENTRY;
+
+/**
+ * A struct that contains function pointe
+ */
+typedef struct _S_MAKE_CRAT_ENTRY {
+ PF_MAKE_CRAT_ENTRY MakeCratEntry; ///< Function Pointer, which points to the function which makes CRAT entry.
+} S_MAKE_CRAT_ENTRY;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _CPU_CRAT_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuDmi.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuDmi.c
new file mode 100644
index 0000000..6ff30d2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuDmi.c
@@ -0,0 +1,872 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD DMI Record Creation API, and related functions.
+ *
+ * Contains code that produce the DMI related information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionDmi.h"
+#include "cpuLateInit.h"
+#include "cpuServices.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "heapManager.h"
+#include "Ids.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FEATURE_CPUDMI_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_DMI_CONFIGURATION OptionDmiConfiguration; // global user config record
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+CHAR8 ROMDATA str_ProcManufacturer[] = "Advanced Micro Devices, Inc.";
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT16
+STATIC
+AdjustGranularity (
+ IN UINT32 *CacheSizePtr
+ );
+
+VOID
+STATIC
+IntToString (
+ IN OUT CHAR8 *String,
+ IN UINT8 *Integer,
+ IN UINT8 SizeInByte
+);
+
+AGESA_STATUS
+GetDmiInfoStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT DMI_INFO **DmiTable
+ );
+
+AGESA_STATUS
+GetDmiInfoMain (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT DMI_INFO **DmiTable
+ );
+
+AGESA_STATUS
+ReleaseDmiBufferStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+ReleaseDmiBuffer (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * CreateDmiRecords
+ *
+ * Description:
+ * This function creates DMI/SMBios records pertinent to the processor
+ * SMBIOS type 4, type 7, and type 40.
+ *
+ * Parameters:
+ * @param[in, out] *StdHeader
+ * @param[in, out] **DmiTable
+ *
+ * @retval AGESA_STATUS
+ *
+ */
+
+AGESA_STATUS
+CreateDmiRecords (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT DMI_INFO **DmiTable
+ )
+{
+ AGESA_TESTPOINT (TpProcCpuEntryDmi, StdHeader);
+ return ((*(OptionDmiConfiguration.DmiFeature)) (StdHeader, DmiTable));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * GetDmiInfoStub
+ *
+ * Description:
+ * This is the default routine for use when the DMI option is NOT requested.
+ * The option install process will create and fill the transfer vector with
+ * the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ * Parameters:
+ * @param[in, out] *StdHeader
+ * @param[in, out] **DmiTable
+ *
+ * @retval AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+GetDmiInfoStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT DMI_INFO **DmiTable
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * GetDmiInfoMain
+ *
+ * Description:
+ * This is the common routine for getting Dmi type4 and type7 CPU related information.
+ *
+ * Parameters:
+ * @param[in, out] *StdHeader
+ * @param[in, out] **DmiTable
+ *
+ * @retval AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+GetDmiInfoMain (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT DMI_INFO **DmiTable
+ )
+{
+ UINT8 Socket;
+ UINT8 Channel;
+ UINT8 Dimm;
+ UINT16 Index;
+ UINT16 DimmIndex;
+ UINT8 MaxPhysicalDimms;
+ UINT8 MaxLogicalDimms;
+ UINT32 MaxCapacity;
+ UINT64 MsrData;
+ UINT64 Value64;
+ UINT8 TypeDetail;
+ UINT32 *TotalMemSizePtr;
+ BOOLEAN FamilyNotFound;
+ AGESA_STATUS Flag;
+ AGESA_STATUS CalledStatus;
+ AP_EXE_PARAMS ApParams;
+ UINT8 *MemInfo;
+ DMI_T17_MEMORY_TYPE *DmiType17MemTypePtr;
+ DMI_T17_MEMORY_TYPE MemType;
+ MEM_DMI_PHYSICAL_DIMM_INFO *DmiPhysicalDimmInfoTable;
+ MEM_DMI_LOGICAL_DIMM_INFO *DmiLogicalDimmInfoTable;
+ DMI_INFO *DmiBufferPtr;
+ ALLOCATE_HEAP_PARAMS AllocateHeapParams;
+ LOCATE_HEAP_PTR LocateHeapParams;
+ CPU_LOGICAL_ID LogicalId;
+ PROC_FAMILY_TABLE *ProcData;
+ CPU_GET_MEM_INFO CpuGetMemInfo;
+
+ MsrData = 0;
+ Flag = TRUE;
+ ProcData = NULL;
+ MemInfo = NULL;
+ DmiBufferPtr = *DmiTable;
+ FamilyNotFound = TRUE;
+
+ GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+ for (Index = 0; Index < OptionDmiConfiguration.NumEntries; Index++) {
+ ProcData = (PROC_FAMILY_TABLE *) ((*OptionDmiConfiguration.FamilyList)[Index]);
+ if ((ProcData->ProcessorFamily & LogicalId.Family) != 0) {
+ FamilyNotFound = FALSE;
+ break;
+ }
+ }
+
+ if (FamilyNotFound) {
+ return AGESA_ERROR;
+ }
+
+ if (DmiBufferPtr == NULL) {
+ //
+ // Allocate a buffer by heap function
+ //
+ AllocateHeapParams.BufferHandle = AMD_DMI_INFO_BUFFER_HANDLE;
+ AllocateHeapParams.RequestedBufferSize = sizeof (DMI_INFO);
+ AllocateHeapParams.Persist = HEAP_SYSTEM_MEM;
+
+ if (HeapAllocateBuffer (&AllocateHeapParams, StdHeader) != AGESA_SUCCESS) {
+ return AGESA_ERROR;
+ }
+
+ DmiBufferPtr = (DMI_INFO *) AllocateHeapParams.BufferPtr;
+ *DmiTable = DmiBufferPtr;
+ }
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " DMI is enabled\n");
+
+ // Fill with 0x00
+ LibAmdMemFill (DmiBufferPtr, 0x00, sizeof (DMI_INFO), StdHeader);
+
+ //
+ // Get CPU information
+ //
+
+ // Run GetType4Type7Info on all core0s.
+ ApParams.StdHeader = *StdHeader;
+ ApParams.FunctionNumber = AP_LATE_TASK_GET_TYPE4_TYPE7;
+ ApParams.RelatedDataBlock = (VOID *) DmiBufferPtr;
+ ApParams.RelatedBlockLength = sizeof (DMI_INFO);
+ CalledStatus = RunLateApTaskOnAllCore0s (&ApParams, StdHeader);
+ if (CalledStatus > Flag) {
+ Flag = CalledStatus;
+ }
+ CalledStatus = GetType4Type7Info (&ApParams);
+ if (CalledStatus > Flag) {
+ Flag = CalledStatus;
+ }
+
+ //------------------------------
+ // T Y P E 16 17 19 20
+ //------------------------------
+
+ LocateHeapParams.BufferHandle = AMD_DMI_MEM_DEV_INFO_HANDLE;
+ if (HeapLocateBuffer (&LocateHeapParams, StdHeader) != AGESA_SUCCESS) {
+ if (Flag < AGESA_ERROR) {
+ Flag = AGESA_ERROR;
+ }
+ } else {
+ MemInfo = (UINT8 *) (LocateHeapParams.BufferPtr);
+ // Max number of physical DIMMs
+ MaxPhysicalDimms = *MemInfo;
+ MemInfo ++;
+ // Type Detail;
+ TypeDetail = *MemInfo;
+ MemInfo ++;
+ // Pointer to total memory size
+ TotalMemSizePtr = (UINT32 *) MemInfo;
+ MemInfo += sizeof (UINT32);
+ // Memory Type
+ DmiType17MemTypePtr = (DMI_T17_MEMORY_TYPE *) MemInfo;
+ MemType = *DmiType17MemTypePtr;
+ DmiType17MemTypePtr ++;
+ MemInfo = (UINT8 *) DmiType17MemTypePtr;
+ // Pointer to DMI info of Physical DIMMs
+ DmiPhysicalDimmInfoTable = (MEM_DMI_PHYSICAL_DIMM_INFO *) MemInfo;
+ // TYPE 16
+ DmiBufferPtr->T16.Location = 0x03;
+ DmiBufferPtr->T16.Use = 0x03;
+
+ // Gather memory information
+ ProcData->DmiGetMemInfo (&CpuGetMemInfo, StdHeader);
+
+ if (CpuGetMemInfo.EccCapable) {
+ DmiBufferPtr->T16.MemoryErrorCorrection = Dmi16MultiBitEcc;
+ } else {
+ DmiBufferPtr->T16.MemoryErrorCorrection = Dmi16NoneErrCorrection;
+ }
+
+ MaxCapacity = *TotalMemSizePtr;
+ // For the total size >= 2TB case, we need leave MaximumCapacity (offset 07h) to 80000000h
+ // and fill the size in bytes into ExtMaxCapacity (offset 0Fh).
+ if (MaxCapacity < 0x200000) {
+ DmiBufferPtr->T16.MaximumCapacity = MaxCapacity << 10;
+ DmiBufferPtr->T16.ExtMaxCapacity = 0;
+ } else {
+ DmiBufferPtr->T16.MaximumCapacity = 0x80000000;
+ DmiBufferPtr->T16.ExtMaxCapacity = (UINT64) MaxCapacity << 20;
+ }
+
+ DmiBufferPtr->T16.NumberOfMemoryDevices = (UINT16) MaxPhysicalDimms;
+
+ // TYPE 17 entries are organized by physical DIMMs
+ for (DimmIndex = 0; DimmIndex < MaxPhysicalDimms; DimmIndex ++, DmiPhysicalDimmInfoTable ++) {
+ Socket = DmiPhysicalDimmInfoTable->Socket;
+ Channel = DmiPhysicalDimmInfoTable->Channel;
+ Dimm = DmiPhysicalDimmInfoTable->Dimm;
+
+ DmiBufferPtr->T17[Socket][Channel][Dimm].Handle = DmiPhysicalDimmInfoTable->Handle;
+ DmiBufferPtr->T17[Socket][Channel][Dimm].TotalWidth = DmiPhysicalDimmInfoTable->TotalWidth;
+ DmiBufferPtr->T17[Socket][Channel][Dimm].DataWidth = DmiPhysicalDimmInfoTable->DataWidth;
+ DmiBufferPtr->T17[Socket][Channel][Dimm].MemorySize = DmiPhysicalDimmInfoTable->MemorySize;
+ DmiBufferPtr->T17[Socket][Channel][Dimm].FormFactor = DmiPhysicalDimmInfoTable->FormFactor;
+ DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceSet = 0;
+
+ DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[0] = 'D';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[1] = 'I';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[2] = 'M';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[3] = 'M';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[4] = ' ';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[5] = Dimm + 0x30;
+ DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[6] = '\0';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].DeviceLocator[7] = '\0';
+
+ DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[0] = 'C';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[1] = 'H';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[2] = 'A';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[3] = 'N';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[4] = 'N';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[5] = 'E';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[6] = 'L';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[7] = ' ';
+ DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[8] = Channel + 0x41;
+ DmiBufferPtr->T17[Socket][Channel][Dimm].BankLocator[9] = '\0';
+
+ DmiBufferPtr->T17[Socket][Channel][Dimm].MemoryType = MemType;
+ if (DmiPhysicalDimmInfoTable->MemorySize != 0) {
+ DmiBufferPtr->T17[Socket][Channel][Dimm].TypeDetail.Synchronous = 1;
+ if (TypeDetail == 1) {
+ DmiBufferPtr->T17[Socket][Channel][Dimm].TypeDetail.Registered = 1;
+ } else if (TypeDetail == 2) {
+ DmiBufferPtr->T17[Socket][Channel][Dimm].TypeDetail.Unbuffered = 1;
+ } else {
+ DmiBufferPtr->T17[Socket][Channel][Dimm].TypeDetail.Unknown = 1;
+ }
+ }
+ DmiBufferPtr->T17[Socket][Channel][Dimm].Speed = DmiPhysicalDimmInfoTable->Speed;
+
+ DmiBufferPtr->T17[Socket][Channel][Dimm].ManufacturerIdCode = DmiPhysicalDimmInfoTable->ManufacturerIdCode;
+
+ IntToString (DmiBufferPtr->T17[Socket][Channel][Dimm].SerialNumber, DmiPhysicalDimmInfoTable->SerialNumber, (sizeof DmiBufferPtr->T17[Socket][Channel][Dimm].SerialNumber - 1) / 2);
+
+ LibAmdMemCopy (&DmiBufferPtr->T17[Socket][Channel][Dimm].PartNumber, &DmiPhysicalDimmInfoTable->PartNumber, sizeof (DmiBufferPtr->T17[Socket][Channel][Dimm].PartNumber), StdHeader);
+ DmiBufferPtr->T17[Socket][Channel][Dimm].PartNumber[18] = 0;
+
+ DmiBufferPtr->T17[Socket][Channel][Dimm].Attributes = DmiPhysicalDimmInfoTable->Attributes;
+ DmiBufferPtr->T17[Socket][Channel][Dimm].ExtSize = DmiPhysicalDimmInfoTable->ExtSize;
+ DmiBufferPtr->T17[Socket][Channel][Dimm].ConfigSpeed = DmiPhysicalDimmInfoTable->ConfigSpeed;
+ }
+
+ // Max number of logical DIMMs
+ MemInfo = (UINT8 *) DmiPhysicalDimmInfoTable;
+ MaxLogicalDimms = *MemInfo;
+ MemInfo ++;
+
+ // Pointer to DMI info of Logical DIMMs
+ DmiLogicalDimmInfoTable = (MEM_DMI_LOGICAL_DIMM_INFO *) MemInfo;
+
+ // TYPE 20 entries are organized by logical DIMMs
+ for (DimmIndex = 0; DimmIndex < MaxLogicalDimms; DimmIndex ++, DmiLogicalDimmInfoTable ++) {
+ Socket = DmiLogicalDimmInfoTable->Socket;
+ Channel = DmiLogicalDimmInfoTable->Channel;
+ Dimm = DmiLogicalDimmInfoTable->Dimm;
+ DmiBufferPtr->T20[Socket][Channel][Dimm].PartitionRowPosition = 0xFF;
+ DmiBufferPtr->T20[Socket][Channel][Dimm].InterleavePosition = 0xFF;
+ DmiBufferPtr->T20[Socket][Channel][Dimm].InterleavedDataDepth = 0xFF;
+
+ if (DmiLogicalDimmInfoTable->DimmPresent) {
+ DmiBufferPtr->T20[Socket][Channel][Dimm].MemoryDeviceHandle = DmiLogicalDimmInfoTable->MemoryDeviceHandle;
+ DmiBufferPtr->T20[Socket][Channel][Dimm].StartingAddr = DmiLogicalDimmInfoTable->StartingAddr;
+ DmiBufferPtr->T20[Socket][Channel][Dimm].EndingAddr = DmiLogicalDimmInfoTable->EndingAddr;
+ DmiBufferPtr->T20[Socket][Channel][Dimm].ExtStartingAddr = DmiLogicalDimmInfoTable->ExtStartingAddr;
+ DmiBufferPtr->T20[Socket][Channel][Dimm].ExtEndingAddr = DmiLogicalDimmInfoTable->ExtEndingAddr;
+ }
+ }
+
+ // TYPE 19
+ DmiBufferPtr->T19.StartingAddr = 0;
+ DmiBufferPtr->T19.ExtStartingAddr = 0;
+ DmiBufferPtr->T19.ExtEndingAddr = 0;
+
+ // If Ending Address >= 0xFFFFFFFF, update Starting Address (offset 04h) & Ending Address (offset 08h) to 0xFFFFFFFF,
+ // and use the Extended Starting Address (offset 0Fh) & Extended Ending Address (offset 17h) instead.
+ Value64 = (UINT64) ((MaxCapacity << 10) - 1);
+ // Value64 = EndingAddr = MaxCapacity in KByte - 1
+ if (Value64 >= ((UINT64) 0xFFFFFFFF)) {
+ DmiBufferPtr->T19.StartingAddr = 0xFFFFFFFFUL;
+ DmiBufferPtr->T19.EndingAddr = 0xFFFFFFFFUL;
+ // In Byte
+ DmiBufferPtr->T19.ExtEndingAddr = Value64 << 10;
+ } else {
+ // In KByte
+ DmiBufferPtr->T19.EndingAddr = (UINT32) Value64;
+ }
+
+ DmiBufferPtr->T19.PartitionWidth = 0xFF;
+ }
+ return (Flag);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * GetType4Type7Info
+ *
+ * Description:
+ * This routine should be run on core 0 of every socket. It creates DMI type 4 and type 7 tables.
+ *
+ * Parameters:
+ * @param[in] ApExeParams Handle to config for library and services.
+ *
+ * @retval AGESA_STATUS
+ *
+ * Processing:
+ *
+ */
+AGESA_STATUS
+GetType4Type7Info (
+ IN AP_EXE_PARAMS *ApExeParams
+ )
+{
+ UINT8 ByteIndexInUint64;
+ UINT16 Index;
+ UINT32 SocketNum;
+ UINT32 IgnoredModule;
+ UINT32 IgnoredCore;
+ UINT64 MsrData;
+ DMI_INFO *DmiBufferPtr;
+ AGESA_STATUS IgnoredSts;
+ AGESA_STATUS Flag;
+ BOOLEAN FamilyNotFound;
+ CPUID_DATA CpuId;
+ CPU_TYPE_INFO CpuInfo;
+ PROC_FAMILY_TABLE *ProcData;
+ CPU_LOGICAL_ID LogicalID;
+
+ Flag = TRUE;
+ DmiBufferPtr = (DMI_INFO *) ApExeParams->RelatedDataBlock;
+ GetLogicalIdOfCurrentCore (&LogicalID, &ApExeParams->StdHeader);
+
+ ProcData = NULL;
+ FamilyNotFound = TRUE;
+ for (Index = 0; Index < OptionDmiConfiguration.NumEntries; Index++) {
+ ProcData = (PROC_FAMILY_TABLE *) ((*OptionDmiConfiguration.FamilyList)[Index]);
+ if ((ProcData->ProcessorFamily & LogicalID.Family) != 0) {
+ FamilyNotFound = FALSE;
+ break;
+ }
+ }
+
+ if (FamilyNotFound) {
+ return AGESA_ERROR;
+ }
+
+ ProcData->DmiGetCpuInfo (&CpuInfo, &ApExeParams->StdHeader);
+
+ // ------------------------------
+ // T Y P E 4
+ // ------------------------------
+
+ IdentifyCore (&ApExeParams->StdHeader, &SocketNum, &IgnoredModule, &IgnoredCore, &IgnoredSts);
+
+ // Type 4 Offset 0x05, Processor Type
+ DmiBufferPtr->T4[SocketNum].T4ProcType = CENTRAL_PROCESSOR;
+
+ // Type 4 Offset 0x06, Processor Family
+ ProcData->DmiGetT4ProcFamily (&DmiBufferPtr->T4[SocketNum].T4ProcFamily, ProcData, &CpuInfo, &ApExeParams->StdHeader);
+
+ if (DmiBufferPtr->T4[SocketNum].T4ProcFamily == P_UPGRADE_UNKNOWN) {
+ Flag = AGESA_ERROR;
+ }
+
+ // Type4 Offset 0x08, Processor ID
+ LibAmdCpuidRead (AMD_CPUID_APICID_LPC_BID, &CpuId, &ApExeParams->StdHeader);
+ DmiBufferPtr->T4[SocketNum].T4ProcId.ProcIdLsd = CpuId.EAX_Reg;
+ DmiBufferPtr->T4[SocketNum].T4ProcId.ProcIdMsd = CpuId.EDX_Reg;
+
+ // Type4 Offset 0x11, Voltage
+ DmiBufferPtr->T4[SocketNum].T4Voltage = ProcData->DmiGetVoltage (&ApExeParams->StdHeader);
+
+ // Type4 Offset 0x12, External Clock
+ DmiBufferPtr->T4[SocketNum].T4ExternalClock = ProcData->DmiGetExtClock (&ApExeParams->StdHeader);
+
+ // Type4 Offset 0x14, Max Speed
+ DmiBufferPtr->T4[SocketNum].T4MaxSpeed = ProcData->DmiGetMaxSpeed (&ApExeParams->StdHeader);
+
+ // Type4 Offset 0x16, Current Speed
+ DmiBufferPtr->T4[SocketNum].T4CurrentSpeed = DmiBufferPtr->T4[SocketNum].T4MaxSpeed;
+
+ // Type4 Offset 0x18, Status
+ DmiBufferPtr->T4[SocketNum].T4Status = SOCKET_POPULATED | CPU_STATUS_ENABLED;
+
+ // Type4 Offset 0x19, Processor Upgrade
+ DmiBufferPtr->T4[SocketNum].T4ProcUpgrade = CpuInfo.ProcUpgrade;
+
+ // Type4 Offset 0x23, 0x24 and 0x25, Core Count, Core Enabled and Thread Count
+ DmiBufferPtr->T4[SocketNum].T4CoreCount = CpuInfo.TotalCoreNumber + 1;
+ DmiBufferPtr->T4[SocketNum].T4CoreEnabled = CpuInfo.EnabledCoreNumber + 1;
+ DmiBufferPtr->T4[SocketNum].T4ThreadCount = CpuInfo.EnabledCoreNumber + 1;
+
+ // Type4 Offset 0x26, Processor Characteristics
+ DmiBufferPtr->T4[SocketNum].T4ProcCharacteristics = P_CHARACTERISTICS;
+
+ // Type4 Offset 0x28, Processor Family 2
+ DmiBufferPtr->T4[SocketNum].T4ProcFamily2 = DmiBufferPtr->T4[SocketNum].T4ProcFamily;
+
+ // Type4 ProcVersion
+ for (Index = 0; Index <= 5; Index++) {
+ LibAmdMsrRead ((MSR_CPUID_NAME_STRING0 + Index), &MsrData, &ApExeParams->StdHeader);
+ for (ByteIndexInUint64 = 0; ByteIndexInUint64 <= 7; ByteIndexInUint64++) {
+ DmiBufferPtr->T4[SocketNum].T4ProcVersion[Index * 8 + ByteIndexInUint64] = (UINT8) (MsrData >> (8 * ByteIndexInUint64));
+ }
+ }
+
+ // Type4 Manufacturer
+ ASSERT (PROC_MANU_LENGTH >= sizeof (str_ProcManufacturer));
+ LibAmdMemCopy (DmiBufferPtr->T4[SocketNum].T4ProcManufacturer, str_ProcManufacturer, sizeof (str_ProcManufacturer), &ApExeParams->StdHeader);
+
+ //------------------------------
+ // T Y P E 7
+ //------------------------------
+
+ // Type7 Offset 0x05, Cache Configuration
+ DmiBufferPtr->T7L1[SocketNum].T7CacheCfg = CACHE_CFG_L1;
+ DmiBufferPtr->T7L2[SocketNum].T7CacheCfg = CACHE_CFG_L2;
+ DmiBufferPtr->T7L3[SocketNum].T7CacheCfg = CACHE_CFG_L3;
+
+ // Type7 Offset 0x07 and 09, Maximum Cache Size and Installed Size
+
+ // Maximum L1 cache size
+ DmiBufferPtr->T7L1[SocketNum].T7MaxCacheSize = AdjustGranularity (&CpuInfo.CacheInfo.L1CacheSize);
+
+ // Installed L1 cache size
+ DmiBufferPtr->T7L1[SocketNum].T7InstallSize = DmiBufferPtr->T7L1[SocketNum].T7MaxCacheSize;
+
+ // Maximum L2 cache size
+ DmiBufferPtr->T7L2[SocketNum].T7MaxCacheSize = AdjustGranularity (&CpuInfo.CacheInfo.L2CacheSize);
+
+ // Installed L2 cache size
+ DmiBufferPtr->T7L2[SocketNum].T7InstallSize = DmiBufferPtr->T7L2[SocketNum].T7MaxCacheSize;
+
+ // Maximum L3 cache size
+ DmiBufferPtr->T7L3[SocketNum].T7MaxCacheSize = AdjustGranularity (&CpuInfo.CacheInfo.L3CacheSize);
+
+ // Installed L3 cache size
+ DmiBufferPtr->T7L3[SocketNum].T7InstallSize = DmiBufferPtr->T7L3[SocketNum].T7MaxCacheSize;
+
+ // Type7 Offset 0x0B and 0D, Supported SRAM Type and Current SRAM Type
+ DmiBufferPtr->T7L1[SocketNum].T7SupportedSramType = SRAM_TYPE;
+ DmiBufferPtr->T7L1[SocketNum].T7CurrentSramType = SRAM_TYPE;
+ DmiBufferPtr->T7L2[SocketNum].T7SupportedSramType = SRAM_TYPE;
+ DmiBufferPtr->T7L2[SocketNum].T7CurrentSramType = SRAM_TYPE;
+ DmiBufferPtr->T7L3[SocketNum].T7SupportedSramType = SRAM_TYPE;
+ DmiBufferPtr->T7L3[SocketNum].T7CurrentSramType = SRAM_TYPE;
+
+ // Type7 Offset 0x0F, Cache Speed
+ DmiBufferPtr->T7L1[SocketNum].T7CacheSpeed = 1;
+ DmiBufferPtr->T7L2[SocketNum].T7CacheSpeed = 1;
+ DmiBufferPtr->T7L3[SocketNum].T7CacheSpeed = 1;
+
+ // Type7 Offset 0x10, Error Correction Type
+ DmiBufferPtr->T7L1[SocketNum].T7ErrorCorrectionType = ERR_CORRECT_TYPE;
+ DmiBufferPtr->T7L2[SocketNum].T7ErrorCorrectionType = ERR_CORRECT_TYPE;
+ DmiBufferPtr->T7L3[SocketNum].T7ErrorCorrectionType = ERR_CORRECT_TYPE;
+
+ // Type7 Offset 0x11, System Cache Type
+ DmiBufferPtr->T7L1[SocketNum].T7SystemCacheType = CACHE_TYPE;
+ DmiBufferPtr->T7L2[SocketNum].T7SystemCacheType = CACHE_TYPE;
+ DmiBufferPtr->T7L3[SocketNum].T7SystemCacheType = CACHE_TYPE;
+
+ // Type7 Offset 0x12, Associativity
+ DmiBufferPtr->T7L1[SocketNum].T7Associativity = CpuInfo.CacheInfo.L1CacheAssoc;
+ DmiBufferPtr->T7L2[SocketNum].T7Associativity = CpuInfo.CacheInfo.L2CacheAssoc;
+ DmiBufferPtr->T7L3[SocketNum].T7Associativity = CpuInfo.CacheInfo.L3CacheAssoc;
+
+ return (Flag);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * DmiGetT4ProcFamilyFromBrandId
+ *
+ * Description:
+ * This is the common routine for getting Type 4 processor family information from brand ID
+ *
+ * Parameters:
+ * @param[in, out] *T4ProcFamily Pointer to type 4 processor family information
+ * @param[in] *CpuDmiProcFamilyTable Pointer to DMI family special service
+ * @param[in] *CpuInfo Pointer to CPU_TYPE_INFO struct
+ * @param[in, out] *StdHeader Standard Head Pointer
+ *
+ * @retval AGESA_STATUS
+ *
+ */
+VOID
+DmiGetT4ProcFamilyFromBrandId (
+ IN OUT UINT8 *T4ProcFamily,
+ IN PROC_FAMILY_TABLE *CpuDmiProcFamilyTable,
+ IN CPU_TYPE_INFO *CpuInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 Index;
+ *T4ProcFamily = P_UPGRADE_UNKNOWN;
+ if (CpuInfo->BrandId.Model != P_ENGINEERING_SAMPLE) {
+ for (Index = 0; Index < CpuDmiProcFamilyTable->LenBrandList; Index++) {
+ if ((CpuDmiProcFamilyTable->DmiBrandList[Index].PackageType == 'x' || CpuDmiProcFamilyTable->DmiBrandList[Index].PackageType == CpuInfo->PackageType) &&
+ (CpuDmiProcFamilyTable->DmiBrandList[Index].PgOfBrandId == 'x' || CpuDmiProcFamilyTable->DmiBrandList[Index].PgOfBrandId == CpuInfo->BrandId.Pg) &&
+ (CpuDmiProcFamilyTable->DmiBrandList[Index].NumberOfCores == 'x' || CpuDmiProcFamilyTable->DmiBrandList[Index].NumberOfCores == CpuInfo->TotalCoreNumber) &&
+ (CpuDmiProcFamilyTable->DmiBrandList[Index].String1ofBrandId == 'x' || CpuDmiProcFamilyTable->DmiBrandList[Index].String1ofBrandId == CpuInfo->BrandId.String1)) {
+ *T4ProcFamily = CpuDmiProcFamilyTable->DmiBrandList[Index].ValueSetToDmiTable;
+ break;
+ }
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * GetNameString
+ *
+ * Description:
+ * Get name string from MSR_C001_00[35:30]
+ *
+ * Parameters:
+ * @param[in, out] *String Pointer to name string
+ * @param[in, out] *StdHeader
+ *
+ */
+VOID
+GetNameString (
+ IN OUT CHAR8 *String,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+ UINT8 StringIndex;
+ UINT8 MsrIndex;
+ UINT64 MsrData;
+
+ StringIndex = 0;
+ for (MsrIndex = 0; MsrIndex <= 5; MsrIndex++) {
+ LibAmdMsrRead ((MSR_CPUID_NAME_STRING0 + MsrIndex), &MsrData, StdHeader);
+ for (i = 0; i < 8; i++) {
+ String[StringIndex] = (CHAR8) (MsrData >> (8 * i));
+ StringIndex++;
+ }
+ }
+ String[StringIndex] = '\0';
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * IsSourceStrContainTargetStr
+ *
+ * Description:
+ * check if source string contains target string.
+ *
+ * Parameters:
+ * @param[in, out] *SourceStr Pointer to source CHAR array
+ * @param[in, out] *TargetStr Pointer to target CHAR array
+ * @param[in, out] *StdHeader
+ *
+ * @retval TRUE Target string is contained in the source string
+ * @retval FALSE Target string is not contained in the source string
+ */
+BOOLEAN
+IsSourceStrContainTargetStr (
+ IN OUT CHAR8 *SourceStr,
+ IN OUT CONST CHAR8 *TargetStr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BOOLEAN IsContained;
+ UINT32 SourceStrIndex;
+ UINT32 TargetStrIndex;
+ CHAR8 TargetChar;
+
+ IsContained = FALSE;
+ if ((TargetStr != NULL) && (SourceStr != NULL)) {
+ for (SourceStrIndex = 0; SourceStr[SourceStrIndex] != '\0'; SourceStrIndex++) {
+ // Compare TrgString with SrcString from frist charactor to the '\0'
+ for (TargetStrIndex = 0; TargetStr[TargetStrIndex] != '\0'; TargetStrIndex++) {
+ if (TargetStr[TargetStrIndex] != SourceStr[SourceStrIndex + TargetStrIndex]) {
+ // if it's not match, try to check the upcase/lowcase
+ TargetChar = 0;
+ if (TargetStr[TargetStrIndex] >= 'a' && TargetStr[TargetStrIndex] <= 'z') {
+ TargetChar = TargetStr[TargetStrIndex] - ('a' - 'A');
+ } else if (TargetStr[TargetStrIndex] >= 'A' && TargetStr[TargetStrIndex] <= 'Z') {
+ TargetChar = TargetStr[TargetStrIndex] + ('a' - 'A');
+ }
+ // compare again
+ if (TargetChar != SourceStr[SourceStrIndex + TargetStrIndex]) {
+ break;
+ }
+ }
+ }
+
+ if ((TargetStr[TargetStrIndex] == '\0') && (TargetStrIndex != 0)) {
+ IsContained = TRUE;
+ break;
+ }
+ }
+ }
+ return IsContained;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * AdjustGranularity
+ *
+ * Description:
+ * If cache size is greater than or equal to 32M, then set granularity
+ * to 64K. otherwise, set granularity to 1K
+ *
+ * Parameters:
+ * @param[in] *CacheSizePtr
+ *
+ * @retval CacheSize
+ *
+ * Processing:
+ *
+ */
+UINT16
+STATIC
+AdjustGranularity (
+ IN UINT32 *CacheSizePtr
+ )
+{
+ UINT16 CacheSize;
+
+ if (*CacheSizePtr >= 0x8000) {
+ CacheSize = (UINT16) (*CacheSizePtr / 64);
+ CacheSize |= 0x8000;
+ } else {
+ CacheSize = (UINT16) *CacheSizePtr;
+ }
+
+ return (CacheSize);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * ReleaseDmiBufferStub
+ *
+ * Description:
+ * This is the default routine for use when the DMI option is NOT requested.
+ *
+ * Parameters:
+ * @param[in, out] *StdHeader
+ *
+ * @retval AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+ReleaseDmiBufferStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * ReleaseDmiBuffer
+ *
+ * Description:
+ * Deallocate DMI buffer
+ *
+ * Parameters:
+ * @param[in, out] *StdHeader
+ *
+ * @retval AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+ReleaseDmiBuffer (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ HeapDeallocateBuffer ((UINT32) AMD_DMI_MEM_DEV_INFO_HANDLE, StdHeader);
+
+ return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * IntToString
+ *
+ * Description:
+ * Translate UINT array to CHAR array.
+ *
+ * Parameters:
+ * @param[in, out] *String Pointer to CHAR array
+ * @param[in] *Integer Pointer to UINT array
+ * @param[in] SizeInByte The size of UINT array
+ *
+ * Processing:
+ *
+ */
+VOID
+STATIC
+IntToString (
+ IN OUT CHAR8 *String,
+ IN UINT8 *Integer,
+ IN UINT8 SizeInByte
+ )
+{
+ UINT8 Index;
+
+ for (Index = 0; Index < SizeInByte; Index++) {
+ *(String + Index * 2) = (*(Integer + Index) >> 4) & 0x0F;
+ *(String + Index * 2 + 1) = *(Integer + Index) & 0x0F;
+ }
+ for (Index = 0; Index < (SizeInByte * 2); Index++) {
+ if (*(String + Index) >= 0x0A) {
+ *(String + Index) += 0x37;
+ } else {
+ *(String + Index) += 0x30;
+ }
+ }
+ *(String + SizeInByte * 2) = 0x0;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuFeatureLeveling.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuFeatureLeveling.c
new file mode 100644
index 0000000..6494c69
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuFeatureLeveling.c
@@ -0,0 +1,265 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Feature Leveling Function.
+ *
+ * Contains code to Level the Feature in a multi-socket system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuPostInit.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_FEATURE_CPUFEATURELEVELING_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+SaveFeatures (
+ IN OUT VOID *cpuFeatureListPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+WriteFeatures (
+ IN OUT VOID *cpuFeatureListPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+GetGlobalCpuFeatureListAddress (
+ OUT UINT64 **Address,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * P U B L I C F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * FeatureLeveling
+ *
+ * CPU feature leveling. Set least common features set of all CPUs
+ *
+ * @param[in,out] StdHeader - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ */
+VOID
+FeatureLeveling (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 BscSocket;
+ UINT32 Ignored;
+ UINT32 BscCoreNum;
+ UINT32 Socket;
+ UINT32 Core;
+ UINT32 NumberOfSockets;
+ UINT32 NumberOfCores;
+ BOOLEAN *FirstTime;
+ BOOLEAN *NeedLeveling;
+ AGESA_STATUS IgnoredSts;
+ CPU_FEATURES_LIST *globalCpuFeatureList;
+ AP_TASK TaskPtr;
+
+ ASSERT (IsBsp (StdHeader, &IgnoredSts));
+
+ GetGlobalCpuFeatureListAddress ((UINT64 **) &globalCpuFeatureList, StdHeader);
+ FirstTime = (BOOLEAN *) ((UINT8 *) globalCpuFeatureList + sizeof (CPU_FEATURES_LIST));
+ NeedLeveling = (BOOLEAN *) ((UINT8 *) globalCpuFeatureList + sizeof (CPU_FEATURES_LIST) + sizeof (BOOLEAN));
+
+ *FirstTime = TRUE;
+ *NeedLeveling = FALSE;
+
+ LibAmdMemFill (globalCpuFeatureList, 0xFF, sizeof (CPU_FEATURES_LIST), StdHeader);
+ IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+
+ TaskPtr.FuncAddress.PfApTaskI = SaveFeatures;
+ TaskPtr.DataTransfer.DataSizeInDwords = SIZE_IN_DWORDS (CPU_FEATURES_LIST);
+ TaskPtr.ExeFlags = WAIT_FOR_CORE;
+ TaskPtr.DataTransfer.DataPtr = globalCpuFeatureList;
+ TaskPtr.DataTransfer.DataTransferFlags = DATA_IN_MEMORY;
+
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ if (Socket != BscSocket) {
+ ApUtilRunCodeOnSocketCore ((UINT8)Socket, 0, &TaskPtr, StdHeader);
+ }
+ }
+ }
+ ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, NULL);
+
+ if (*NeedLeveling) {
+ TaskPtr.FuncAddress.PfApTaskI = WriteFeatures;
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+ for (Core = 0; Core < NumberOfCores; Core++) {
+ if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+ ApUtilRunCodeOnSocketCore ((UINT8)Socket, (UINT8)Core, &TaskPtr, StdHeader);
+ }
+ }
+ }
+ }
+ ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, NULL);
+ }
+}
+
+/*----------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * SaveFeatures
+ *
+ * save least common features set of all CPUs
+ *
+ * @param[in,out] cpuFeatureListPtr - Pointer to CPU Feature List.
+ * @param[in,out] StdHeader - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ */
+VOID
+STATIC
+SaveFeatures (
+ IN OUT VOID *cpuFeatureListPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ FamilySpecificServices = NULL;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->SaveFeatures (FamilySpecificServices, cpuFeatureListPtr, StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * WriteFeatures
+ *
+ * Write out least common features set of all CPUs
+ *
+ * @param[in,out] cpuFeatureListPtr - Pointer to CPU Feature List.
+ * @param[in,out] StdHeader - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ */
+VOID
+STATIC
+WriteFeatures (
+ IN OUT VOID *cpuFeatureListPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ FamilySpecificServices = NULL;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->WriteFeatures (FamilySpecificServices, cpuFeatureListPtr, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * GetGlobalCpuFeatureListAddress
+ *
+ * Determines the address in system DRAM that should be used for CPU feature leveling.
+ *
+ * @param[out] Address Address to utilize
+ * @param[in] StdHeader Config handle for library and services
+ *
+ *
+ */
+VOID
+STATIC
+GetGlobalCpuFeatureListAddress (
+ OUT UINT64 **Address,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 AddressValue;
+
+ AddressValue = GLOBAL_CPU_FEATURE_LIST_TEMP_ADDR;
+
+ *Address = (UINT64 *)(UINT32)(AddressValue);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuFeatures.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuFeatures.c
new file mode 100644
index 0000000..d3753cb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuFeatures.c
@@ -0,0 +1,283 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Implement general feature dispatcher.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "GeneralServices.h"
+#include "cpuFeatures.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+#define FILECODE PROC_CPU_FEATURE_CPUFEATURES_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S - External General Services API
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST CPU_FEATURE_DESCRIPTOR* ROMDATA SupportedCpuFeatureList[];
+
+/**
+ * Update the status of a specific feature
+ *
+ * Update the status (is enabled or not) in heap
+ *
+ * @param[in] Feature Indicates the desired feature.
+ * @param[in] IsEnabled Indicates the desired feature
+ * @param[in] StdHeader Standard AMD configuration parameters.
+ *
+ */
+VOID
+UpdateFeatureStatusInHeap (
+ IN DISPATCHABLE_CPU_FEATURES Feature,
+ IN BOOLEAN IsEnabled,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *CpuFeatureIsEnabledHeap;
+ LOCATE_HEAP_PTR LocateHeap;
+
+ ASSERT (Feature < MaxCpuFeature);
+
+ CpuFeatureIsEnabledHeap = NULL;
+ LocateHeap.BufferHandle = AMD_IS_FEATURE_ENABLED;
+ if (HeapLocateBuffer (&LocateHeap, StdHeader) == AGESA_SUCCESS) {
+ CpuFeatureIsEnabledHeap = LocateHeap.BufferPtr;
+ }
+ if (CpuFeatureIsEnabledHeap != NULL) {
+ CpuFeatureIsEnabledHeap[Feature] = (UINT8) IsEnabled;
+ }
+}
+
+/**
+ * Determines if a specific feature is or will be enabled.
+ *
+ * This code traverses the feature list until a match is
+ * found, then invokes the 'IsEnabled' function of the
+ * feature.
+ *
+ * @param[in] Feature Indicates the desired feature.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Standard AMD configuration parameters.
+ *
+ * @retval TRUE Feature is or will be enabled
+ * @retval FALSE Feature is not enabled
+ */
+BOOLEAN
+IsFeatureEnabled (
+ IN DISPATCHABLE_CPU_FEATURES Feature,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *CpuFeatureIsEnabledHeap;
+ UINTN i;
+ LOCATE_HEAP_PTR LocateHeap;
+
+ ASSERT (Feature < MaxCpuFeature);
+
+ CpuFeatureIsEnabledHeap = NULL;
+ LocateHeap.BufferHandle = AMD_IS_FEATURE_ENABLED;
+ if (HeapLocateBuffer (&LocateHeap, StdHeader) == AGESA_SUCCESS) {
+ CpuFeatureIsEnabledHeap = LocateHeap.BufferPtr;
+ }
+ if (CpuFeatureIsEnabledHeap != NULL) {
+ if (CpuFeatureIsEnabledHeap[Feature] != CPU_FEATURE_UNDECIDED) {
+ return ((BOOLEAN) CpuFeatureIsEnabledHeap[Feature]);
+ }
+ }
+
+ for (i = 0; SupportedCpuFeatureList[i] != NULL; i++) {
+ if (SupportedCpuFeatureList[i]->Feature == Feature) {
+ return (SupportedCpuFeatureList[i]->IsEnabled (PlatformConfig, StdHeader));
+ }
+ }
+ return FALSE;
+}
+
+/**
+ * Dispatches all features needing to perform some initialization at
+ * this time point.
+ *
+ * This routine searches the feature table for features needing to
+ * run at this time point, and invokes them.
+ *
+ * @param[in] EntryPoint Timepoint designator
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Standard AMD configuration parameters.
+ *
+ * @return The most severe status of any called service.
+ */
+AGESA_STATUS
+DispatchCpuFeatures (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *CpuFeatureIsEnabledHeap;
+ UINTN i;
+ BOOLEAN FeatureIsEnabled;
+ BOOLEAN ResultDecided;
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS CalledStatus;
+ AGESA_STATUS IgnoredStatus;
+ LOCATE_HEAP_PTR LocateHeap;
+ ALLOCATE_HEAP_PARAMS AllocateHeap;
+
+
+ AgesaStatus = AGESA_SUCCESS;
+
+ CpuFeatureIsEnabledHeap = NULL;
+ LocateHeap.BufferHandle = AMD_IS_FEATURE_ENABLED;
+ if (HeapLocateBuffer (&LocateHeap, StdHeader) == AGESA_SUCCESS) {
+ CpuFeatureIsEnabledHeap = LocateHeap.BufferPtr;
+ } else {
+ AllocateHeap.BufferHandle = AMD_IS_FEATURE_ENABLED;
+ AllocateHeap.RequestedBufferSize = MaxCpuFeature;
+ AllocateHeap.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocateHeap, StdHeader) == AGESA_SUCCESS) {
+ CpuFeatureIsEnabledHeap = AllocateHeap.BufferPtr;
+ // Initialize all feature as NOT_KNOW_YET
+ LibAmdMemFill ((VOID *) CpuFeatureIsEnabledHeap, CPU_FEATURE_UNDECIDED, MaxCpuFeature, StdHeader);
+ }
+ }
+
+ if (IsBsp (StdHeader, &IgnoredStatus)) {
+ for (i = 0; SupportedCpuFeatureList[i] != NULL; i++) {
+ if ((SupportedCpuFeatureList[i]->EntryPoint & EntryPoint) != 0) {
+ ResultDecided = FALSE;
+ FeatureIsEnabled = FALSE;
+ /// @todo IDS need updated
+ IDS_SKIP_HOOK (IDS_CPU_FEAT, (CPU_FEATURE_DESCRIPTOR *) SupportedCpuFeatureList[i], StdHeader) {
+ if (CpuFeatureIsEnabledHeap != NULL) {
+ // Try to get isFeatureEnabled from heap
+ if (CpuFeatureIsEnabledHeap[SupportedCpuFeatureList[i]->Feature] != CPU_FEATURE_UNDECIDED) {
+ FeatureIsEnabled = (BOOLEAN) (CpuFeatureIsEnabledHeap[SupportedCpuFeatureList[i]->Feature]);
+ ResultDecided = TRUE;
+ }
+ }
+ if (!ResultDecided) {
+ // Get isFeatureEnabled by running IsEnabled
+ FeatureIsEnabled = SupportedCpuFeatureList[i]->IsEnabled (PlatformConfig, StdHeader);
+ if (CpuFeatureIsEnabledHeap != NULL) {
+ CpuFeatureIsEnabledHeap[SupportedCpuFeatureList[i]->Feature] = (UINT8) FeatureIsEnabled;
+ }
+ }
+ if (FeatureIsEnabled) {
+ CalledStatus = SupportedCpuFeatureList[i]->InitializeFeature (EntryPoint, PlatformConfig, StdHeader);
+ if (CalledStatus > AgesaStatus) {
+ AgesaStatus = CalledStatus;
+ }
+ }
+ }
+ }
+ }
+ }
+ return AgesaStatus;
+}
+
+/**
+ * This routine checks whether any non-coherent links in the system
+ * runs in HT1 mode; used to determine whether certain features
+ * should be disabled when this routine returns TRUE.
+ *
+ * @param[in] StdHeader Standard AMD configuration parameters.
+ *
+ * @retval TRUE One of the non-coherent links in the
+ * system runs in HT1 mode
+ * @retval FALSE None of the non-coherent links in the
+ * system is running in HT1 mode
+ */
+BOOLEAN
+IsNonCoherentHt1 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINTN Link;
+ UINT32 Socket;
+ UINT32 Module;
+ PCI_ADDR PciAddress;
+ AGESA_STATUS AgesaStatus;
+ HT_HOST_FEATS HtHostFeats;
+ CPU_SPECIFIC_SERVICES *CpuServices;
+
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ GetCpuServicesOfSocket (Socket, (CONST CPU_SPECIFIC_SERVICES **)&CpuServices, StdHeader);
+ for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+ if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &AgesaStatus)) {
+ HtHostFeats.HtHostValue = 0;
+ Link = 0;
+ while (CpuServices->GetNextHtLinkFeatures (CpuServices, &Link, &PciAddress, &HtHostFeats, StdHeader)) {
+ // Return TRUE and exit routine once we find a non-coherent link in HT1
+ if ((HtHostFeats.HtHostFeatures.NonCoherent == 1) && (HtHostFeats.HtHostFeatures.Ht1 == 1)) {
+ return TRUE;
+ }
+ }
+ }
+ }
+ }
+ }
+
+ return FALSE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuFeatures.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuFeatures.h
new file mode 100644
index 0000000..47444ef
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuFeatures.h
@@ -0,0 +1,281 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Generic CPU feature dispatcher and related services.
+ *
+ * Provides a feature processing engine to handle feature in a
+ * more generic way.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Common
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_FEATURES_H_
+#define _CPU_FEATURES_H_
+
+/**
+ * @page cpufeatimpl CPU Generic Feature Implementation Guide
+ *
+ * The CPU generic feature dispatcher provides services which can be used to implement a
+ * wide range of features in a manner that isolates calling code from knowledge about which
+ * families or features are supported in the current build.
+ *
+ * @par Determine if a New Feature is a Suitable Candidate
+ *
+ * A feature must meet the following requirements:
+ * <ul>
+ * <li> Any core in the system must be able to determine if the feature should be enabled or not.
+ *
+ * <ul>
+ * <li> MSRs cannot be read in multisocket systems in the 'IsEnabled' function.
+ *
+ * <li> Cores cannot be launched in the 'IsEnabled' function.
+ * </ul>
+ * </ul>
+ *
+ * @par Determine the Time Point at which the Feature Should be Enabled
+ *
+ * Factors to consider in making this determination:
+ *
+ * <ul>
+ * <li> Determine if there are any dependencies on other settings that require strict ordering.
+ *
+ * <li> Consider the state of the APs that you will need.
+ *
+ * <li> Remember that features enabled during AmdInitEarly will automatically be restored on S3 resume.
+ * </ul>
+ *
+ * @par Implementing a new feature
+ *
+ * Perform the following steps to implement a new feature:
+ *
+ * <ul>
+ * <li> Create a unique equate for your time point, @b if you cannot use an existing time point.
+ *
+ * <li> Create a new value in the DISPATCHABLE_CPU_FEATURES enum for your feature.
+ *
+ * <li> Add a new 'C' file to the Features folder for your feature.
+ *
+ * <ul>
+ * <li> The 'C' file must implement 2 functions -- 'IsEnabled' and 'Initialize'
+ *
+ * <li> The 'C' file must instantiate a CPU_FEATURE_DESCRIPTOR structure.
+ * </ul>
+ *
+ * <li> Add a new 'H' file to the Features folder for your feature.
+ *
+ * <ul>
+ * <li> The 'H' file declares whatever family specific functions required by the feature.
+ *
+ * <li> The 'H' file declares a structure containing all family specific functions. For a reference
+ * example, your feature API should have a set of conventions similar to cpu specific services,
+ * @ref cpuimplfss.
+ * </ul>
+ *
+ * <li> Create 'C' files in all applicable family folders.
+ *
+ * <ul>
+ * <li> Implement the required family specific functions.
+ *
+ * <li> Instantiate a family specific services structure.
+ * </ul>
+ *
+ * <li> Create \<feature name\>Install.h in the include folder.
+ *
+ * <ul>
+ * <li> Add logic to determine when your feature should be included in the build.
+ *
+ * <li> If the feature should be included, define OPTION_\<feature name\> to the address of your
+ * CPU_FEATURE_DESCRIPTOR instantiation. If not, define OPTION_\<feature name\> to be blank.
+ *
+ * <li> Create a family translation table pointing to all applicable instantiations of
+ * family specific function structures.
+ * </ul>
+ *
+ * <li> Modify OptionCpuFeaturesInstall.h in the include folder.
+ *
+ * <ul>
+ * <li> Include \<feature name\>Install.h.
+ *
+ * <li> Add OPTION_\<feature name\> to the SupportedCpuFeatureList array.
+ * </ul>
+ *
+ * <li> If a new time point was created, add a call to DispatchCpuFeatures at the desired location,
+ * passing your new time point equate.
+ * </ul>
+ *
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+#define CPU_FEAT_BEFORE_PM_INIT (0x0000000000000001ull)
+#define CPU_FEAT_AFTER_PM_INIT (0x0000000000000002ull)
+#define CPU_FEAT_AFTER_POST_MTRR_SYNC (0x0000000000000004ull)
+#define CPU_FEAT_INIT_MID_END (0x0000000000000008ull)
+#define CPU_FEAT_INIT_LATE_END (0x0000000000000010ull)
+#define CPU_FEAT_S3_LATE_RESTORE_END (0x0000000000000020ull)
+#define CPU_FEAT_AFTER_RESUME_MTRR_SYNC (0x0000000000000040ull)
+#define CPU_FEAT_AFTER_COHERENT_DISCOVERY (0x0000000000000080ull)
+#define CPU_FEAT_BEFORE_RELINQUISH_AP (0x0000000000000100ull)
+
+#define CPU_FEATURE_UNDECIDED 0xFFul
+#define CPU_FEATURE_DISABLED ((UINT8) FALSE)
+#define CPU_FEATURE_ENABLED ((UINT8) TRUE)
+
+/**
+ * Enumerated list of supported features.
+ */
+typedef enum {
+ L3Features, ///< L3 dependent features
+ MsgBasedC1e, ///< Message-based C1e
+ CoreLeveling, ///< Core Leveling
+ C6Cstate, ///< C6 C-state
+ IoCstate, ///< IO C-state
+ CacheFlushOnHalt, ///< Cache Flush On Halt
+ PreserveAroundMailbox, ///< Save-Restore the registers used for AP mailbox, to preserve their normal function.
+ CpuApm, ///< Application Power Management
+ CoreBoost, ///< Core Performance Boost (CPB)
+ LowPwrPstate, ///< 500 MHz Low Power P-state
+ PstateHpcMode, ///< High performance computing mode
+ CpuPsi, ///< Power Status Indicator
+ CpuHtc, ///< Hardware Thermal Control
+ CpuTdpLimiting, ///< TDP limiting
+ PrefetchMode, ///< CPU Prefetch Mode
+ MaxCpuFeature ///< Not a valid value, used for verifying input
+} DISPATCHABLE_CPU_FEATURES;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Feature specific call to check if it is supported by the system.
+ *
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE Feature is supported.
+ * @retval FALSE Feature is not supported.
+ *
+ */
+typedef BOOLEAN F_CPU_FEATURE_IS_ENABLED (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_FEATURE_IS_ENABLED *PF_CPU_FEATURE_IS_ENABLED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * The feature's main entry point for enablement.
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_CPU_FEATURE_INITIALIZE (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_FEATURE_INITIALIZE *PF_CPU_FEATURE_INITIALIZE;
+
+
+/**
+ * Generic feature descriptor
+ */
+typedef struct {
+ DISPATCHABLE_CPU_FEATURES Feature; ///< Enumerated feature ID
+ UINT64 EntryPoint; ///< Timepoint designator
+ PF_CPU_FEATURE_IS_ENABLED IsEnabled; ///< Pointer to the function that checks if the feature is supported
+ PF_CPU_FEATURE_INITIALIZE InitializeFeature; ///< Pointer to the function that enables the feature
+} CPU_FEATURE_DESCRIPTOR;
+
+/**
+ * Table descriptor for the installed features.
+ */
+typedef struct {
+ UINT8 NumberOfFeats; ///< Number of valid entries in the table.
+ CPU_FEATURE_DESCRIPTOR *FeatureList; ///< Pointer to the first element in the array.
+} CPU_FEATURE_TABLE;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+UpdateFeatureStatusInHeap (
+ IN DISPATCHABLE_CPU_FEATURES Feature,
+ IN BOOLEAN IsEnabled,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+IsFeatureEnabled (
+ IN DISPATCHABLE_CPU_FEATURES Feature,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+DispatchCpuFeatures (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+IsNonCoherentHt1 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _CPU_FEATURES_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuHtc.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuHtc.c
new file mode 100644
index 0000000..9807102
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuHtc.c
@@ -0,0 +1,201 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Hardware Thermal Control (HTC) feature support code.
+ *
+ * Contains code that declares the AGESA CPU HTC related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuApicUtilities.h"
+#include "cpuFeatures.h"
+#include "cpuHtc.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_FEATURE_CPUHTC_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT32
+STATIC
+EnableHtcOnSocket (
+ IN VOID *EntryPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE HtcFamilyServiceTable;
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Should Hardware Thermal Control (HTC) be enabled
+ *
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE HTC is supported.
+ * @retval FALSE HTC cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsHtcFeatureEnabled (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ BOOLEAN IsEnabled;
+ HTC_FAMILY_SERVICES *HtcFamilyServices;
+
+ IsEnabled = TRUE;
+
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ GetFeatureServicesOfSocket (&HtcFamilyServiceTable, Socket, (CONST VOID **)&HtcFamilyServices, StdHeader);
+ if ((HtcFamilyServices == NULL) || (!HtcFamilyServices->IsHtcSupported (HtcFamilyServices, Socket, PlatformConfig, StdHeader))) {
+ IsEnabled = FALSE;
+ break;
+ }
+ }
+ }
+ return IsEnabled;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Enable Hardware Thermal Control (HTC)
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeHtcFeature (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AP_TASK TaskPtr;
+ AGESA_STATUS AgesaStatus;
+ AMD_CPU_EARLY_PARAMS CpuEarlyParams;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " HTC is being initialized\n");
+
+ CpuEarlyParams.PlatformConfig = *PlatformConfig;
+
+ TaskPtr.FuncAddress.PfApTaskIOC = EnableHtcOnSocket;
+ TaskPtr.DataTransfer.DataSizeInDwords = 2;
+ TaskPtr.DataTransfer.DataPtr = &EntryPoint;
+ TaskPtr.DataTransfer.DataTransferFlags = 0;
+ TaskPtr.ExeFlags = PASS_EARLY_PARAMS | TASK_HAS_OUTPUT;
+ AgesaStatus = OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, &CpuEarlyParams);
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " HTC is enabled\n");
+
+ return AgesaStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * AP task to enable HTC
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] StdHeader Config Handle for library, services.
+ * @param[in] CpuEarlyParams Service parameters.
+ *
+ */
+UINT32
+STATIC
+EnableHtcOnSocket (
+ IN VOID *EntryPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ )
+{
+ AGESA_STATUS CalledStatus;
+ HTC_FAMILY_SERVICES *HtcFamilyServices;
+
+ CalledStatus = AGESA_UNSUPPORTED;
+ GetFeatureServicesOfCurrentCore (&HtcFamilyServiceTable, (CONST VOID **)&HtcFamilyServices, StdHeader);
+ if (HtcFamilyServices != NULL) {
+ CalledStatus = HtcFamilyServices->EnableHtcOnSocket (HtcFamilyServices, *((UINT64 *) EntryPoint), &CpuEarlyParams->PlatformConfig, StdHeader);
+ }
+ return (UINT32) CalledStatus;
+}
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureHtc =
+{
+ CpuHtc,
+ (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+ IsHtcFeatureEnabled,
+ InitializeHtcFeature
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuHtc.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuHtc.h
new file mode 100644
index 0000000..913802f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuHtc.h
@@ -0,0 +1,130 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Hardware Thermal Control (HTC) Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU HTC related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_HTC_H_
+#define _CPU_HTC_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (HTC_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if Hardware Thermal Control (HTC) is supported.
+ *
+ * @param[in] HtcServices HTC services.
+ * @param[in] Socket Zero-based socket number.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE HTC is supported.
+ * @retval FALSE HTC is not supported.
+ *
+ */
+typedef BOOLEAN F_HTC_IS_SUPPORTED (
+ IN HTC_FAMILY_SERVICES *HtcServices,
+ IN UINT32 Socket,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_HTC_IS_SUPPORTED *PF_HTC_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to enable HTC.
+ *
+ * @param[in] HtcServices HTC services.
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_HTC_INIT (
+ IN HTC_FAMILY_SERVICES *HtcServices,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_HTC_INIT *PF_HTC_INIT;
+
+/**
+ * Provide the interface to the HTC Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+typedef struct _HTC_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_HTC_IS_SUPPORTED IsHtcSupported; ///< Method: Family specific call to check if HTC is supported.
+ PF_HTC_INIT EnableHtcOnSocket; ///< Method: Family specific call to enable HTC.
+} HTC_FAMILY_SERVICES;
+
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N S P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _CPU_HTC_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuIoCstate.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuIoCstate.c
new file mode 100644
index 0000000..a98f182
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuIoCstate.c
@@ -0,0 +1,207 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU IO Cstate function declarations.
+ *
+ * Contains code that declares the AGESA CPU IO Cstate related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuFeatures.h"
+#include "cpuIoCstate.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuApicUtilities.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_FEATURE_CPUIOCSTATE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+EnableIoCstateOnSocket (
+ IN VOID *EntryPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ );
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE IoCstateFamilyServiceTable;
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Should IO Cstate be enabled
+ * If all processors support IO Cstate, return TRUE. Otherwise, return FALSE
+ *
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE IO Cstate is supported.
+ * @retval FALSE IO Cstate cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsIoCstateFeatureSupported (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ BOOLEAN IsSupported;
+ IO_CSTATE_FAMILY_SERVICES *IoCstateServices;
+
+ IsSupported = FALSE;
+ if ((PlatformConfig->CStateIoBaseAddress != 0) && (PlatformConfig->CStateIoBaseAddress <= 0xFFF8)) {
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ GetFeatureServicesOfSocket (&IoCstateFamilyServiceTable, Socket, (CONST VOID **)&IoCstateServices, StdHeader);
+ if (IoCstateServices != NULL) {
+ if (IoCstateServices->IsIoCstateSupported (IoCstateServices, Socket, StdHeader)) {
+ IsSupported = TRUE;
+ } else {
+ // Stop checking remaining socket(s) once we find one that does not support IO Cstates
+ IsSupported = FALSE;
+ break;
+ }
+ } else {
+ // Exit the for loop if we found a socket that does not have the IO Cstates feature installed
+ IsSupported = FALSE;
+ break;
+ }
+ }
+ }
+ }
+ return IsSupported;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Enable IO Cstate feature
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializeIoCstateFeature (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AP_TASK TaskPtr;
+ AMD_CPU_EARLY_PARAMS CpuEarlyParams;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " IO C-state is enabled\n");
+
+ CpuEarlyParams.PlatformConfig = *PlatformConfig;
+
+ TaskPtr.FuncAddress.PfApTaskIC = EnableIoCstateOnSocket;
+ TaskPtr.DataTransfer.DataSizeInDwords = 2;
+ TaskPtr.DataTransfer.DataPtr = &EntryPoint;
+ TaskPtr.DataTransfer.DataTransferFlags = 0;
+ TaskPtr.ExeFlags = PASS_EARLY_PARAMS;
+ OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, &CpuEarlyParams);
+
+ return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * 'Local' core 0 task to enable IO Cstate on it's socket.
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] StdHeader Config Handle for library, services.
+ * @param[in] CpuEarlyParams Service parameters.
+ *
+ */
+VOID
+STATIC
+EnableIoCstateOnSocket (
+ IN VOID *EntryPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ )
+{
+ IO_CSTATE_FAMILY_SERVICES *FamilyServices;
+
+ GetFeatureServicesOfCurrentCore (&IoCstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+ FamilyServices->InitializeIoCstate (FamilyServices,
+ *((UINT64 *) EntryPoint),
+ &CpuEarlyParams->PlatformConfig,
+ StdHeader);
+}
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeatureIoCstate =
+{
+ IoCstate,
+ (CPU_FEAT_AFTER_PM_INIT),
+ IsIoCstateFeatureSupported,
+ InitializeIoCstateFeature
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuIoCstate.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuIoCstate.h
new file mode 100644
index 0000000..5cd9c82
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuIoCstate.h
@@ -0,0 +1,283 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU IO Cstate feature support code.
+ *
+ * Contains code that declares the AGESA CPU IO Cstate related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_IO_CSTATE_H_
+#define _CPU_IO_CSTATE_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (IO_CSTATE_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+// Defines for ACPI C-State Objects
+#define CST_NAME__ '_'
+#define CST_NAME_C 'C'
+#define CST_NAME_S 'S'
+#define CST_NAME_T 'T'
+#define CST_LENGTH (CST_BODY_SIZE - 1)
+#define CST_NUM_OF_ELEMENTS 0x02
+#define CST_COUNT 0x01
+#define CST_PKG_LENGTH (CST_BODY_SIZE - 6) // CST_BODY_SIZE - PkgHeader - Count Buffer
+#define CST_PKG_ELEMENTS 0x04
+#define CST_SUBPKG_LENGTH 0x14
+#define CST_SUBPKG_ELEMENTS 0x0A
+#define CST_GDR_LENGTH 0x000C
+#define CST_C1_TYPE 0x01
+#define CST_C2_TYPE 0x02
+
+#define CSD_NAME_D 'D'
+#define CSD_COORD_TYPE_HW_ALL 0xFE
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/* AML code definition */
+
+/// CST Header
+typedef struct _CST_HEADER_STRUCT {
+ UINT8 NameOpcode; ///< Name Opcode
+ UINT8 CstName_a__; ///< String "_"
+ UINT8 CstName_a_C; ///< String "C"
+ UINT8 CstName_a_S; ///< String "S"
+ UINT8 CstName_a_T; ///< String "T"
+} CST_HEADER_STRUCT;
+#define CST_HEADER_SIZE 5
+
+/// CST Body
+typedef struct _CST_BODY_STRUCT {
+ UINT8 PkgOpcode; ///< Package Opcode
+ UINT8 PkgLength; ///< Package Length
+ UINT8 PkgElements; ///< Number of Elements
+ UINT8 BytePrefix; ///< Byte Prefix Opcode
+ UINT8 Count; ///< Number of Cstate info packages
+ UINT8 PkgOpcode2; ///< Package Opcode
+ UINT8 PkgLength2; ///< Package Length
+ UINT8 PkgElements2; ///< Number of Elements
+ UINT8 BufferOpcode; ///< Buffer Opcode
+ UINT8 BufferLength; ///< Buffer Length
+ UINT8 BufferElements; ///< Number of Elements
+ UINT8 BufferOpcode2; ///< Buffer Opcode
+ UINT8 GdrOpcode; ///< Generic Register Descriptor Opcode
+ UINT16 GdrLength; ///< Descriptor Length
+ UINT8 AddrSpaceId; ///< Address Space ID
+ UINT8 RegBitWidth; ///< Register Bit Width
+ UINT8 RegBitOffset; ///< Register Bit Offset
+ UINT8 AddressSize; ///< Address Size
+ UINT64 RegisterAddr; ///< Register Address
+ UINT16 EndTag; ///< End Tag Descriptor
+ UINT8 BytePrefix2; ///< Byte Prefix Opcode
+ UINT8 Type; ///< Type
+ UINT8 WordPrefix; ///< Word Prefix Opcode
+ UINT16 Latency; ///< Latency
+ UINT8 DWordPrefix; ///< Dword Prefix Opcode
+ UINT32 Power; ///< Power
+} CST_BODY_STRUCT;
+#define CST_BODY_SIZE 39
+
+/// CSD Header
+typedef struct _CSD_HEADER_STRUCT {
+ UINT8 NameOpcode; ///< Name Opcode
+ UINT8 CsdName_a__; ///< String "_"
+ UINT8 CsdName_a_C; ///< String "C"
+ UINT8 CsdName_a_S; ///< String "S"
+ UINT8 CsdName_a_D; ///< String "D"
+} CSD_HEADER_STRUCT;
+#define CSD_HEADER_SIZE 5
+
+/// CSD Body
+typedef struct _CSD_BODY_STRUCT {
+ UINT8 PkgOpcode; ///< Package Opcode
+ UINT8 PkgLength; ///< Package Length
+ UINT8 PkgElements; ///< Number of Elements
+ UINT8 PkgOpcode2; ///< Package Opcode
+ UINT8 PkgLength2; ///< Package Length
+ UINT8 PkgElements2; ///< Number of Elements
+ UINT8 BytePrefix; ///< Byte Prefix Opcode
+ UINT8 NumEntries; ///< Number of Entries
+ UINT8 BytePrefix2; ///< Byte Prefix Opcode
+ UINT8 Revision; ///< Revision
+ UINT8 DWordPrefix; ///< DWord Prefix Opcode
+ UINT32 Domain; ///< Dependency Domain Number
+ UINT8 DWordPrefix2; ///< DWord Prefix Opcode
+ UINT32 CoordType; ///< Coordination Type
+ UINT8 DWordPrefix3; ///< Dword Prefix Opcode
+ UINT32 NumProcessors; ///< Number of Processors in the Domain
+ UINT8 DWordPrefix4; ///< Dword Prefix Opcode
+ UINT32 Index; ///< Index of C-State entry for which dependency applies
+} CSD_BODY_STRUCT;
+#define CSD_BODY_SIZE 30
+
+/// input for create _CST
+typedef struct _ACPI_CST_CREATE_INPUT {
+ IO_CSTATE_FAMILY_SERVICES *IoCstateServices; ///< Family service of IoCstate
+ UINT8 LocalApicId; ///< Local Apic for create _CST
+ VOID **PstateAcpiBufferPtr; ///< buffer for fill _CST
+} ACPI_CST_CREATE_INPUT ;
+
+/// input for get _CST
+typedef struct _ACPI_CST_GET_INPUT {
+ IO_CSTATE_FAMILY_SERVICES *IoCstateServices; ///< Family service of IoCstate
+ PLATFORM_CONFIGURATION *PlatformConfig; ///< platform config
+ UINT32 *CStateAcpiObjSizePtr; ///< Point to size of _CST
+} ACPI_CST_GET_INPUT ;
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if IO Cstate is supported.
+ *
+ * @param[in] IoCstateServices IO Cstate services.
+ * @param[in] Socket Zero-based socket number.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE IO Cstate is supported.
+ * @retval FALSE IO Cstate is not supported.
+ *
+ */
+typedef BOOLEAN F_IO_CSTATE_IS_SUPPORTED (
+ IN IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to enable IO Cstate.
+ *
+ * @param[in] IoCstateServices IO Cstate services.
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_IO_CSTATE_INIT (
+ IN IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to return the size of ACPI C-State Objects
+ *
+ * @param[in] IoCstateServices IO Cstate services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval Size of ACPI C-State Objects
+ *
+ */
+typedef UINT32 F_IO_CSTATE_GET_CST_SIZE (
+ IN IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to create ACPI C-State Objects
+ *
+ * @param[in] IoCstateServices IO Cstate services.
+ * @param[in] LocalApicId Local Apic Id
+ * @param[in, out] PstateAcpiBufferPtr Pointer to Pstate data buffer
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+typedef VOID F_IO_CSTATE_CREATE_CST (
+ IN IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+ IN UINT8 LocalApicId,
+ IN OUT VOID **PstateAcpiBufferPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check whether CSD object should be created.
+ *
+ * @param[in] IoCstateServices IO Cstate services.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE CSD Object should be created.
+ * @retval FALSE CSD Object should not be created.
+ *
+ */
+typedef BOOLEAN F_IO_CSTATE_IS_CSD_GENERATED (
+ IN IO_CSTATE_FAMILY_SERVICES *IoCstateServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method
+typedef F_IO_CSTATE_IS_SUPPORTED *PF_IO_CSTATE_IS_SUPPORTED;
+typedef F_IO_CSTATE_INIT *PF_IO_CSTATE_INIT;
+typedef F_IO_CSTATE_GET_CST_SIZE *PF_IO_CSTATE_GET_CST_SIZE;
+typedef F_IO_CSTATE_CREATE_CST *PF_IO_CSTATE_CREATE_CST;
+typedef F_IO_CSTATE_IS_CSD_GENERATED *PF_IO_CSTATE_IS_CSD_GENERATED;
+
+/**
+ * Provide the interface to the IO Cstate Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _IO_CSTATE_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_IO_CSTATE_IS_SUPPORTED IsIoCstateSupported; ///< Method: Family specific call to check if IO Cstate is supported.
+ PF_IO_CSTATE_INIT InitializeIoCstate; ///< Method: Family specific call to enable IO Cstate
+ PF_IO_CSTATE_GET_CST_SIZE GetAcpiCstObj; ///< Method: Family specific call to return the size of ACPI CST objects.
+ PF_IO_CSTATE_CREATE_CST CreateAcpiCstObj; ///< Method: Family specific call to create ACPI CST object
+ PF_IO_CSTATE_IS_CSD_GENERATED IsCsdObjGenerated; ///< Method: Family specific call to check whether CSD Object should be created.
+};
+
+#endif // _CPU_IO_CSTATE_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuL3Features.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuL3Features.h
new file mode 100644
index 0000000..d2c1424
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuL3Features.h
@@ -0,0 +1,399 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU L3 Features Initialization functions.
+ *
+ * Contains code that declares the AGESA CPU L3 dependent feature related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_L3_FEATURES_H_
+#define _CPU_L3_FEATIRES_H_
+
+#include "Filecode.h"
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (L3_FEATURE_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define AP_LATE_TASK_DISABLE_CACHE (0x00000000ul | PROC_CPU_FEATURE_CPUL3FEATURES_FILECODE)
+#define AP_LATE_TASK_ENABLE_CACHE (0x00010000ul | PROC_CPU_FEATURE_CPUL3FEATURES_FILECODE)
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+#define L3_SCRUBBER_CONTEXT_ARRAY_SIZE 4
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if L3 Features are supported.
+ *
+ * @param[in] L3FeatureServices L3 Feature family services.
+ * @param[in] Socket Processor socket to check.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE L3 dependent features are supported
+ * @retval FALSE L3 dependent features are not supported
+ *
+ */
+typedef BOOLEAN F_L3_FEATURE_IS_SUPPORTED (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_IS_SUPPORTED *PF_L3_FEATURE_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific hook before L3 features are initialized.
+ *
+ * @param[in] L3FeatureServices L3 Feature family services.
+ * @param[in] Socket Processor socket to check.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+typedef VOID F_L3_FEATURE_BEFORE_INIT (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_BEFORE_INIT *PF_L3_FEATURE_BEFORE_INIT;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to disable cache.
+ *
+ * @param[in] L3FeatureServices L3 Feature family services.
+ * @param[in] HtAssistEnabled Indicates whether Ht Assist is enabled.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+typedef VOID F_L3_FEATURE_DISABLE_CACHE (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN BOOLEAN HtAssistEnabled,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_DISABLE_CACHE *PF_L3_FEATURE_DISABLE_CACHE;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to disable cache.
+ *
+ * @param[in] L3FeatureServices L3 Feature family services.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef VOID F_L3_FEATURE_ENABLE_CACHE (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_ENABLE_CACHE *PF_L3_FEATURE_ENABLE_CACHE;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to Initialize L3 Features
+ *
+ * @param[in] L3FeatureServices L3 Feature family services.
+ * @param[in] Socket Processor socket to enable.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+typedef VOID F_L3_FEATURE_INIT (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_INIT *PF_L3_FEATURE_INIT;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific hook after L3 Features are initialized.
+ *
+ * @param[in] L3FeatureServices L3 Features family services.
+ * @param[in] Socket Processor socket to check.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+typedef VOID F_L3_FEATURE_AFTER_INIT (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_AFTER_INIT *PF_L3_FEATURE_AFTER_INIT;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to save the L3 scrubber.
+ *
+ * @param[in] L3FeatureServices L3 Feature family services.
+ * @param[in] Socket Processor socket to check.
+ * @param[in] ScrubSettings Location to store current L3 scrubber settings.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+typedef VOID F_L3_FEATURE_GET_L3_SCRUB_CTRL (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN UINT32 Socket,
+ IN UINT32 ScrubSettings[L3_SCRUBBER_CONTEXT_ARRAY_SIZE],
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_GET_L3_SCRUB_CTRL *PF_L3_FEATURE_GET_L3_SCRUB_CTRL;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to restore the L3 scrubber.
+ *
+ * @param[in] L3FeatureServices L3 Feature family services.
+ * @param[in] Socket Processor socket to check.
+ * @param[in] ScrubSettings Contains L3 scrubber settings to restore.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+typedef VOID F_L3_FEATURE_SET_L3_SCRUB_CTRL (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN UINT32 Socket,
+ IN UINT32 ScrubSettings[L3_SCRUBBER_CONTEXT_ARRAY_SIZE],
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_L3_FEATURE_SET_L3_SCRUB_CTRL *PF_L3_FEATURE_SET_L3_SCRUB_CTRL;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if HT Assist is supported.
+ *
+ * @param[in] L3FeatureServices L3 Feature family services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE HT Assist is supported.
+ * @retval FALSE HT Assist is not supported.
+ *
+ */
+typedef BOOLEAN F_HT_ASSIST_IS_SUPPORTED (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_HT_ASSIST_IS_SUPPORTED *PF_HT_ASSIST_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to Initialize HT Assist
+ *
+ * @param[in] L3FeatureServices L3 Features family services.
+ * @param[in] Socket Processor socket to enable.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+typedef VOID F_HT_ASSIST_INIT (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_HT_ASSIST_INIT *PF_HT_ASSIST_INIT;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to provide non_optimal HT Assist support
+ *
+ * @param[in] L3FeatureServices L3 Feature family services.
+ * @param[in] Socket Processor socket to check.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return TRUE The system may be running with non-optimal settings.
+ * @return FALSE The system may is running optimally.
+ *
+ */
+typedef BOOLEAN F_HT_ASSIST_IS_NONOPTIMAL (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_HT_ASSIST_IS_NONOPTIMAL *PF_HT_ASSIST_IS_NONOPTIMAL;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if ATM Mode is supported.
+ *
+ * @param[in] L3FeatureServices L3 Features family services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE ATM Mode is supported.
+ * @retval FALSE ATM Mode is not supported.
+ *
+ */
+typedef BOOLEAN F_ATM_MODE_IS_SUPPORTED (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_ATM_MODE_IS_SUPPORTED *PF_ATM_MODE_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to Initialize ATM mode
+ *
+ * @param[in] L3FeatureServices L3 Features family services.
+ * @param[in] Socket Processor socket to enable.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+typedef VOID F_ATM_MODE_INIT (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_ATM_MODE_INIT *PF_ATM_MODE_INIT;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if Neighbor Cache Mode is supported.
+ *
+ * @param[in] L3FeatureServices L3 Features family services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE Neighbor Cache is supported.
+ * @retval FALSE Neighbor Cache is not supported.
+ *
+ */
+typedef BOOLEAN F_NBR_CACHE_IS_SUPPORTED (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_NBR_CACHE_IS_SUPPORTED *PF_NBR_CACHE_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to Initialize Neighbor Cache
+ *
+ * @param[in] L3FeatureServices L3 Features family services.
+ * @param[in] Socket Processor socket to enable.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ */
+typedef VOID F_NBR_CACHE_INIT (
+ IN L3_FEATURE_FAMILY_SERVICES *L3FeatureServices,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_NBR_CACHE_INIT *PF_NBR_CACHE_INIT;
+
+/**
+ * Provide the interface to the L3 dependent features Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _L3_FEATURE_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_L3_FEATURE_IS_SUPPORTED IsL3FeatureSupported; ///< Method: Check if L3 dependent features are supported.
+ PF_L3_FEATURE_GET_L3_SCRUB_CTRL GetL3ScrubCtrl; ///< Method: Save/disable the L3 scrubber.
+ PF_L3_FEATURE_SET_L3_SCRUB_CTRL SetL3ScrubCtrl; ///< Method: Restore the L3 scrubber.
+ PF_L3_FEATURE_BEFORE_INIT HookBeforeInit; ///< Method: Hook before enabling L3 dependent features.
+ PF_L3_FEATURE_AFTER_INIT HookAfterInit; ///< Method: Hook after enabling L3 dependent features.
+ PF_L3_FEATURE_DISABLE_CACHE HookDisableCache; ///< Method: Core hook just before disabling cache.
+ PF_L3_FEATURE_ENABLE_CACHE HookEnableCache; ///< Method: Core hook just after enabling cache.
+ PF_HT_ASSIST_IS_SUPPORTED IsHtAssistSupported; ///< Method: Check if HT Assist is supported.
+ PF_HT_ASSIST_INIT HtAssistInit; ///< Method: Enable HT Assist.
+ PF_HT_ASSIST_IS_NONOPTIMAL IsNonOptimalConfig; ///< Method: Check if HT Assist is running optimally.
+ PF_ATM_MODE_IS_SUPPORTED IsAtmModeSupported; ///< Method: Check if ATM Mode is supported.
+ PF_ATM_MODE_INIT AtmModeInit; ///< Method: Enable ATM Mode.
+ PF_NBR_CACHE_IS_SUPPORTED IsNbrCacheSupported; ///< Method: Check if Neighbor Cache is supported.
+ PF_NBR_CACHE_INIT NbrCacheInit; ///< Method: Enable Neighbor Cache.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N S P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+DisableAllCaches (
+ IN AP_EXE_PARAMS *ApExeParams
+ );
+
+AGESA_STATUS
+EnableAllCaches (
+ IN AP_EXE_PARAMS *ApExeParams
+ );
+
+#endif // _CPU_L3_FEATURES_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuMsgBasedC1e.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuMsgBasedC1e.h
new file mode 100644
index 0000000..0fc252f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuMsgBasedC1e.h
@@ -0,0 +1,127 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Message-based C1e Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU C1e related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_MSG_BASED_C1E_H_
+#define _CPU_MSG_BASED_C1E_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (MSG_BASED_C1E_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if message-based C1e is supported.
+ *
+ * @param[in] MsgBasedC1eServices Contains the runtime modifiable feature input data.
+ * @param[in] Socket Processor socket to check.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE Message-based C1e is supported.
+ * @retval FALSE Message-based C1e is not supported.
+ *
+ */
+typedef BOOLEAN F_MSG_BASED_C1E_IS_SUPPORTED (
+ IN MSG_BASED_C1E_FAMILY_SERVICES *MsgBasedC1eServices,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_MSG_BASED_C1E_IS_SUPPORTED *PF_MSG_BASED_C1E_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to enable hardware C1e.
+ *
+ * @param[in] MsgBasedC1eServices Hardware C1e services.
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_MSG_BASED_C1E_INIT (
+ IN MSG_BASED_C1E_FAMILY_SERVICES *MsgBasedC1eServices,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_MSG_BASED_C1E_INIT *PF_MSG_BASED_C1E_INIT;
+
+/**
+ * Provide the interface to the hardware C1e Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _MSG_BASED_C1E_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_MSG_BASED_C1E_IS_SUPPORTED IsMsgBasedC1eSupported; ///< Method: Family specific call to check if hardware C1e is supported.
+ PF_MSG_BASED_C1E_INIT InitializeMsgBasedC1e; ///< Method: Family specific call to enable hardware C1e.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N S P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _CPU_MSG_BASED_C1E_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPrefetchMode.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPrefetchMode.h
new file mode 100644
index 0000000..1d837f5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPrefetchMode.h
@@ -0,0 +1,110 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Prefetch Mode Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU prefetch mode related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_PREFETCH_MODE_H_
+#define _CPU_PREFETCH_MODE_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (PREFETCH_MODE_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define AP_LATE_TASK_CPU_PREFETCH_MODE (PROC_CPU_FEATURE_CPUPREFETCHMODE_FILECODE)
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to enable prefetch mode.
+ *
+ * @param[in] PrefetchModeServices Prefetch mode services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_PREFETCH_MODE_INIT (
+ IN PREFETCH_MODE_FAMILY_SERVICES *PrefetchModeServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_PREFETCH_MODE_INIT *PF_PREFETCH_MODE_INIT;
+
+/**
+ * Provide the interface to the prefetch mode Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _PREFETCH_MODE_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_PREFETCH_MODE_INIT PrefetchModeControlOnCore; ///< Method: Family specific call to control prefetch mode.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N S P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+CpuPrefetchModeApTask (
+ IN AP_EXE_PARAMS *ApExeParams
+ );
+
+#endif // _CPU_PREFETCH_MODE_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPsi.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPsi.c
new file mode 100644
index 0000000..8977236
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPsi.c
@@ -0,0 +1,213 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Power Status Indicator (PSI) feature support code.
+ *
+ * Contains code that declares the AGESA CPU PSI related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuApicUtilities.h"
+#include "cpuFeatures.h"
+#include "cpuPsi.h"
+#include "OptionMultiSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_FEATURE_CPUPSI_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT32
+STATIC
+EnablePsiOnSocket (
+ IN VOID *EntryPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE PsiFamilyServiceTable;
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Should Power Status Indicator (PSI) be enabled
+ *
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE PSI is supported.
+ * @retval FALSE PSI cannot be enabled.
+ *
+ */
+BOOLEAN
+STATIC
+IsPsiFeatureEnabled (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ BOOLEAN IsEnabled;
+ PSI_FAMILY_SERVICES *PsiFamilyServices;
+ UINT32 VrmType;
+
+ IsEnabled = FALSE;
+
+ for (VrmType = 0; VrmType < MaxVrmType; VrmType++) {
+ if (PlatformConfig->VrmProperties[VrmType].LowPowerThreshold != 0) {
+ IsEnabled = TRUE;
+ break;
+ }
+ }
+
+ if (!IsEnabled) {
+ return FALSE;
+ }
+
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ GetFeatureServicesOfSocket (&PsiFamilyServiceTable, Socket, (CONST VOID **)&PsiFamilyServices, StdHeader);
+ if ((PsiFamilyServices == NULL) || (!PsiFamilyServices->IsPsiSupported (PsiFamilyServices, Socket, PlatformConfig, StdHeader))) {
+ IsEnabled = FALSE;
+ break;
+ }
+ }
+ }
+ return IsEnabled;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Enable Power Status Indicator (PSI)
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ *
+ */
+AGESA_STATUS
+STATIC
+InitializePsiFeature (
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AP_TASK TaskPtr;
+ AGESA_STATUS AgesaStatus;
+ AMD_CPU_EARLY_PARAMS CpuEarlyParams;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " PSI mode is being initialized\n");
+
+ CpuEarlyParams.PlatformConfig = *PlatformConfig;
+
+ TaskPtr.FuncAddress.PfApTaskIOC = EnablePsiOnSocket;
+ TaskPtr.DataTransfer.DataSizeInDwords = 2;
+ TaskPtr.DataTransfer.DataPtr = &EntryPoint;
+ TaskPtr.DataTransfer.DataTransferFlags = 0;
+ TaskPtr.ExeFlags = PASS_EARLY_PARAMS | TASK_HAS_OUTPUT;
+ AgesaStatus = OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, &CpuEarlyParams);
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " PSI mode is enabled\n");
+
+ return AgesaStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * AP task to enable PSI
+ *
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] StdHeader Config Handle for library, services.
+ * @param[in] CpuEarlyParams Service parameters.
+ *
+ */
+UINT32
+STATIC
+EnablePsiOnSocket (
+ IN VOID *EntryPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ )
+{
+ AGESA_STATUS CalledStatus;
+ PSI_FAMILY_SERVICES *PsiFamilyServices;
+
+ CalledStatus = AGESA_UNSUPPORTED;
+ GetFeatureServicesOfCurrentCore (&PsiFamilyServiceTable, (CONST VOID **)&PsiFamilyServices, StdHeader);
+ if (PsiFamilyServices != NULL) {
+ CalledStatus = PsiFamilyServices->EnablePsiOnSocket (PsiFamilyServices, *((UINT64 *) EntryPoint), &CpuEarlyParams->PlatformConfig, StdHeader);
+ }
+ return (UINT32) CalledStatus;
+}
+
+CONST CPU_FEATURE_DESCRIPTOR ROMDATA CpuFeaturePsi =
+{
+ CpuPsi,
+ (CPU_FEAT_AFTER_POST_MTRR_SYNC | CPU_FEAT_AFTER_RESUME_MTRR_SYNC),
+ IsPsiFeatureEnabled,
+ InitializePsiFeature
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPsi.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPsi.h
new file mode 100644
index 0000000..ad2a5e5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPsi.h
@@ -0,0 +1,130 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Power Status Indicator (PSI) Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU PSI related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_PSI_H_
+#define _CPU_PSI_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (PSI_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if Power Status Indicator (PSI) is supported.
+ *
+ * @param[in] PsiServices PSI services.
+ * @param[in] Socket Zero-based socket number.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE PSI is supported.
+ * @retval FALSE PSI is not supported.
+ *
+ */
+typedef BOOLEAN F_PSI_IS_SUPPORTED (
+ IN PSI_FAMILY_SERVICES *PsiServices,
+ IN UINT32 Socket,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_PSI_IS_SUPPORTED *PF_PSI_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to enable PSI.
+ *
+ * @param[in] PsiServices PSI services.
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_PSI_INIT (
+ IN PSI_FAMILY_SERVICES *PsiServices,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_PSI_INIT *PF_PSI_INIT;
+
+/**
+ * Provide the interface to the PSI Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+typedef struct _PSI_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_PSI_IS_SUPPORTED IsPsiSupported; ///< Method: Family specific call to check if PSI is supported.
+ PF_PSI_INIT EnablePsiOnSocket; ///< Method: Family specific call to enable PSI.
+} PSI_FAMILY_SERVICES;
+
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N S P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _CPU_PSI_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateGather.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateGather.c
new file mode 100644
index 0000000..796b455
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateGather.c
@@ -0,0 +1,410 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Pstate Data Gather Function.
+ *
+ * Contains code to collect all the Pstate related information from MSRs, and PCI registers.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionPstate.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuPostInit.h"
+#include "Ids.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "cpuApicUtilities.h"
+#include "cpuFeatures.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_FEATURE_CPUPSTATEGATHER_FILECODE
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_PSTATE_POST_CONFIGURATION OptionPstatePostConfiguration; // global user config record
+extern CPU_FAMILY_SUPPORT_TABLE PstateFamilyServiceTable;
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+PStateGatherStub (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr
+ );
+
+AGESA_STATUS
+PStateGatherMain (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr
+ );
+
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+PStateGather (
+ IN OUT VOID *PStateBuffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ * PStateGatherData
+ *
+ * Description:
+ * This function will gather PState information from the MSRs and fill up the
+ * pStateBuf. This buffer will be used by the PState Leveling, and PState Table
+ * generation code later.
+ *
+ * Parameters:
+ * @param[in] *PlatformConfig
+ * @param[in, out] *PStateStrucPtr
+ * @param[in] *StdHeader
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PStateGatherData (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+
+ AGESA_STATUS AgesaStatus;
+
+ AGESA_TESTPOINT (TpProcCpuEntryPstateGather, StdHeader);
+ AgesaStatus = AGESA_SUCCESS;
+
+ // Gather data for ACPI Tables if ACPI P-States/C-States object generation is enabled.
+ if ((PlatformConfig->UserOptionPState) || (IsFeatureEnabled (IoCstate, PlatformConfig, StdHeader))) {
+ AgesaStatus = (*(OptionPstatePostConfiguration.PstateGather)) (StdHeader, PStateStrucPtr);
+ // Note: Split config struct into PEI/DXE halves. This one is PEI.
+ }
+
+ return AgesaStatus;
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ * PStateGatherStub
+ *
+ * Description:
+ * This is the default routine for use when the PState option is NOT requested.
+ * The option install process will create and fill the transfer vector with
+ * the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ * Parameters:
+ * @param[in] *StdHeader
+ * @param[in, out] *PStateStrucPtr
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PStateGatherStub (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ * PStateGatherMain
+ *
+ * Description:
+ * This is the common routine for BSP gathering the Pstate data.
+ *
+ * Parameters:
+ * @param[in] *StdHeader
+ * @param[in, out] *PStateStrucPtr
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PStateGatherMain (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr
+ )
+{
+ AP_TASK TaskPtr;
+ UINT32 BscSocket;
+ UINT32 Ignored;
+ UINT32 PopulatedSockets;
+ UINT32 NumberOfSockets;
+ UINT32 Socket;
+ AGESA_STATUS IgnoredSts;
+ PSTATE_LEVELING *PStateBufferPtr;
+ PSTATE_CPU_FAMILY_SERVICES *FamilyServices;
+ UINT32 MaxState;
+ UINT8 IgnoredByte;
+
+ ASSERT (IsBsp (StdHeader, &IgnoredSts));
+
+ FamilyServices = NULL;
+ GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+
+ PopulatedSockets = 1;
+ PStateBufferPtr = PStateStrucPtr->PStateLevelingStruc;
+
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+ IdentifyCore (StdHeader, &BscSocket, &Ignored, &Ignored, &IgnoredSts);
+
+ PStateStrucPtr->SizeOfBytes = sizeof (S_CPU_AMD_PSTATE);
+
+ MaxState = 0;
+ FamilyServices->GetPstateMaxState (FamilyServices, &MaxState, &IgnoredByte, StdHeader);
+
+ TaskPtr.FuncAddress.PfApTaskI = PStateGather;
+ //
+ // Calculate max buffer size in dwords that need to pass to ap task.
+ //
+ TaskPtr.DataTransfer.DataSizeInDwords = (UINT16) ((MaxState + 1) * (SIZE_IN_DWORDS (S_PSTATE_VALUES)));
+ TaskPtr.ExeFlags = WAIT_FOR_CORE;
+ TaskPtr.DataTransfer.DataPtr = PStateBufferPtr;
+ TaskPtr.DataTransfer.DataTransferFlags = DATA_IN_MEMORY;
+
+ //
+ //Get P-States and fill the PStateBufferPtr for BSP
+ //
+ ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, NULL);
+
+ //
+ //Calculate next node buffer address
+ //
+ PStateBufferPtr->SocketNumber = (UINT8) BscSocket;
+ PStateBufferPtr->PStateLevelingSizeOfBytes = (UINT16) (sizeof (PSTATE_LEVELING) + (UINT32) (PStateBufferPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+ PStateStrucPtr->SizeOfBytes += (UINT32) (PStateBufferPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES));
+ PStateBufferPtr = (PSTATE_LEVELING *) ((UINT8 *) PStateBufferPtr + (UINTN) sizeof (PSTATE_LEVELING) + (UINTN) (PStateBufferPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+ CpuGetPStateLevelStructure (&PStateBufferPtr, PStateStrucPtr, 1, StdHeader);
+ //
+ //Get CPU P-States and fill the PStateBufferPtr for each node(BSC)
+ //
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (Socket != BscSocket) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ PopulatedSockets++;
+ LibAmdMemFill (PStateBufferPtr, 0, sizeof (PSTATE_LEVELING), StdHeader);
+ TaskPtr.DataTransfer.DataPtr = PStateBufferPtr;
+ ApUtilRunCodeOnSocketCore ((UINT8)Socket, 0, &TaskPtr, StdHeader);
+ PStateBufferPtr->SocketNumber = (UINT8) Socket;
+ //
+ //Calculate next node buffer address
+ //
+ PStateBufferPtr->PStateLevelingSizeOfBytes = (UINT16) (sizeof (PSTATE_LEVELING) + (UINT32) (PStateBufferPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+ PStateStrucPtr->SizeOfBytes += PStateBufferPtr->PStateLevelingSizeOfBytes;
+ PStateBufferPtr = (PSTATE_LEVELING *) ((UINT8 *) PStateBufferPtr + (UINTN) sizeof (PSTATE_LEVELING) + (UINTN) (PStateBufferPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+ }
+ }
+ }
+ PStateStrucPtr->TotalSocketInSystem = PopulatedSockets;
+
+ return AGESA_SUCCESS;
+}
+/**--------------------------------------------------------------------------------------
+ *
+ * PStateGather
+ *
+ * Description:
+ * This is the common routine run on each BSC for gathering Pstate data.
+ *
+ * Parameters:
+ * @param[in,out] *PStateBuffer
+ * @param[in] *StdHeader
+ *
+ * @retval VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+PStateGather (
+ IN OUT VOID *PStateBuffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 k;
+ UINT32 IddVal;
+ UINT32 IddDiv;
+ UINT32 NodeNum;
+ UINT32 CoreNum;
+ UINT32 TempVar_c;
+ UINT32 TotalEnabledPStates;
+ UINT32 SwPstate;
+ UINT8 BoostStates;
+ PCI_ADDR PciAddress;
+ PSTATE_LEVELING *PStateBufferPtr;
+ BOOLEAN PStateEnabled;
+ PSTATE_CPU_FAMILY_SERVICES *FamilyServices;
+ UINT32 Socket;
+ AGESA_STATUS IgnoredSts;
+ CPUID_DATA CpuId;
+
+ PStateBufferPtr = (PSTATE_LEVELING *) PStateBuffer;
+ TotalEnabledPStates = 0;
+ FamilyServices = NULL;
+ PStateEnabled = FALSE;
+
+ GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+
+ //
+ /// Sockets number: code looking at PStateBufferPtr->TotalCoresInNode
+ /// needs to know it is Processor (or socket) core count and NOT a Node Core count.
+ GetActiveCoresInCurrentSocket (&CoreNum, StdHeader);
+ PStateBufferPtr->TotalCoresInNode = (UINT8) CoreNum;
+
+ //
+ // Assume current CoreNum always zero.(BSC)
+ //
+ GetCurrentNodeAndCore (&NodeNum, &CoreNum, StdHeader);
+
+ PStateBufferPtr->CreateAcpiTables = 1;
+
+ //
+ // We need to know the max pstate state in this socket.
+ //
+ FamilyServices->GetPstateMaxState (FamilyServices, &TempVar_c, &BoostStates, StdHeader);
+ PStateBufferPtr->PStateCoreStruct[0].PStateMaxValue = (UINT8) TempVar_c;
+ PStateBufferPtr->PStateCoreStruct[0].NumberOfBoostedStates = BoostStates;
+
+ for (k = 0; k <= TempVar_c; k++) {
+ // Check if PState is enabled
+ FamilyServices->GetPstateRegisterInfo ( FamilyServices,
+ k,
+ &PStateEnabled,
+ &IddVal,
+ &IddDiv,
+ &SwPstate,
+ StdHeader);
+
+ LibAmdMemFill (&(PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k]), 0, sizeof (S_PSTATE_VALUES), StdHeader);
+
+ if (PStateEnabled) {
+ FamilyServices->GetPstateFrequency (
+ FamilyServices,
+ (UINT8) k,
+ &(PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k].CoreFreq),
+ StdHeader);
+
+ FamilyServices->GetPstatePower (
+ FamilyServices,
+ (UINT8) k,
+ &(PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k].Power),
+ StdHeader);
+
+ PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k].IddValue = IddVal;
+ PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k].IddDiv = IddDiv;
+ PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k].SwPstateNumber = SwPstate;
+
+ PStateBufferPtr->PStateCoreStruct[0].PStateStruct[k].PStateEnable = 1;
+ TotalEnabledPStates++;
+ }
+ } // for (k = 0; k < MPPSTATE_MAXIMUM_STATES; k++)
+
+ // Don't create ACPI Tables if there is one or less than one PState is enabled
+ if (TotalEnabledPStates <= 1) {
+ PStateBufferPtr[0].CreateAcpiTables = 0;
+ }
+
+ //--------------------Check Again--------------------------------
+
+ IdentifyCore (StdHeader, &Socket, &NodeNum, &CoreNum, &IgnoredSts);
+ // Get the PCI address of internal die 0 as it is the only die programmed.
+ GetPciAddress (StdHeader, Socket, 0, &PciAddress, &IgnoredSts);
+ PciAddress.Address.Function = FUNC_3;
+ PciAddress.Address.Register = NORTH_BRIDGE_CAPABILITIES_REG;
+ TempVar_c = 0;
+ LibAmdPciRead (AccessWidth32, PciAddress, &TempVar_c, StdHeader);
+ PStateBufferPtr->PStateCoreStruct[0].HtcCapable =
+ (UINT8) ((TempVar_c & 0x00000400) >> 10); // Bit 10
+
+ TempVar_c = 0;
+ PciAddress.Address.Register = HARDWARE_THERMAL_CTRL_REG;
+ LibAmdPciRead (AccessWidth32, PciAddress, &TempVar_c, StdHeader);
+ PStateBufferPtr->PStateCoreStruct[0].HtcPstateLimit =
+ (UINT8) ((TempVar_c & 0x70000000) >> 28); // Bits 30:28
+
+ // Get LocalApicId from CPUID Fn0000_0001_EBX
+ LibAmdCpuidRead (AMD_CPUID_APICID_LPC_BID, &CpuId, StdHeader);
+ PStateBufferPtr->PStateCoreStruct[0].LocalApicId = (UINT8) ((CpuId.EBX_Reg & 0xFF000000) >> 24);
+}
+
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateHpcMode.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateHpcMode.h
new file mode 100644
index 0000000..f8f41bf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateHpcMode.h
@@ -0,0 +1,98 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Pstate HPC mode Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU Pstate HPC mode related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_PSTATE_HPC_MODE_H_
+#define _CPU_PSTATE_HPC_MODE_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_FORWARD_DECLARATION (PSTATE_HPC_MODE_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to enable P-state HPC mode
+ *
+ * @param[in] PstateHpcModeService P-state HPC mode services.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_PSTATE_HPC_MODE_INIT (
+ IN PSTATE_HPC_MODE_FAMILY_SERVICES *PstateHpcModeService,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_PSTATE_HPC_MODE_INIT *PF_PSTATE_HPC_MODE_INIT;
+
+/**
+ * Provide the interface to the P-state HPC mode Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _PSTATE_HPC_MODE_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_PSTATE_HPC_MODE_INIT EnablePstateHpcMode; ///< Method: Family specific call to enable P-state HPC mode.
+};
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N S P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _CPU_PSTATE_HPC_MODE_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateLeveling.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateLeveling.c
new file mode 100644
index 0000000..ab135b9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateLeveling.c
@@ -0,0 +1,1100 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Pstate Leveling Function.
+ *
+ * Contains code to level the Pstates in a multi-socket system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionPstate.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "cpuPostInit.h"
+#include "Ids.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "cpuApicUtilities.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_FEATURE_CPUPSTATELEVELING_FILECODE
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_PSTATE_POST_CONFIGURATION OptionPstatePostConfiguration; // global user config record
+extern CPU_FAMILY_SUPPORT_TABLE PstateFamilyServiceTable;
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+PutAllCoreInPState0 (
+ IN OUT PSTATE_LEVELING *PStateBufferPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+StartPstateMsrModify (
+ IN S_CPU_AMD_PSTATE *CpuAmdPState,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+PutCoreInPState0 (
+ IN VOID *PStateBuffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+PStateLevelingStub (
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+PStateLevelingMain (
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+CorePstateRegModify (
+ IN VOID *CpuAmdPState,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ * PStateLeveling
+ *
+ * Description:
+ * This function will populate the PStateBuffer, after doing the PState Leveling
+ * Note: This function should be called for every core in the system.
+ *
+ * Parameters:
+ * @param[in,out] *PStateStrucPtr
+ * @param[in] *StdHeader
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PStateLeveling (
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_TESTPOINT (TpProcCpuEntryPstateLeveling, StdHeader);
+ return ((*(OptionPstatePostConfiguration.PstateLeveling)) (PStateStrucPtr, StdHeader));
+ // Note: Split config struct into PEI/DXE halves. This one is PEI.
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ * PStateLevelingStub
+ *
+ * Description:
+ * This is the default routine for use when the PState option is NOT requested.
+ * The option install process will create and fill the transfer vector with
+ * the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ * Parameters:
+ * @param[in,out] *PStateStrucPtr
+ * @param[in] *StdHeader
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PStateLevelingStub (
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ * PStateLevelingMain
+ *
+ * Description:
+ * This is the common routine for creating the ACPI information tables.
+ *
+ * Parameters:
+ * @param[in,out] *PStateStrucPtr
+ * @param[in] *StdHeader
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PStateLevelingMain (
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 i;
+ UINT32 k;
+ UINT32 m;
+ UINT32 TotalIterations;
+ UINT32 LogicalSocketCount;
+ UINT32 TempVar_a;
+ UINT32 TempVar_b;
+ UINT32 TempVar_c;
+ UINT32 TempVar_d;
+ UINT32 TempVar_e;
+ UINT32 TempVar_f;
+ PCI_ADDR PciAddress;
+
+ UINT32 TempFreqArray[20];
+ UINT32 TempPowerArray[20];
+ UINT32 TempIddValueArray[20];
+ UINT32 TempIddDivArray[20];
+ UINT32 TempSocketPiArray[20];
+ UINT32 TempSwP0Array[MAX_SOCKETS_SUPPORTED];
+
+ BOOLEAN TempFlag1;
+ BOOLEAN TempFlag2;
+ BOOLEAN TempFlag3;
+ BOOLEAN TempFlag4;
+ BOOLEAN AllCoresHaveHtcCapEquToZeroFlag;
+ BOOLEAN AllCoreHaveMaxOnePStateFlag;
+ BOOLEAN PstateMaxValEquToPstateHtcLimitFlag;
+ BOOLEAN AtLeastOneCoreHasPstateHtcLimitEquToOneFlag;
+ BOOLEAN PstateMaxValMinusHtcPstateLimitLessThan2Flag;
+ PSTATE_LEVELING *PStateBufferPtr;
+ PSTATE_LEVELING *PStateBufferPtrTmp;
+ UINT32 MaxPstateInNode;
+ AGESA_STATUS Status;
+
+ TempFlag1 = FALSE;
+ TempFlag2 = FALSE;
+ TempFlag3 = FALSE;
+ TempFlag4 = FALSE;
+ AllCoresHaveHtcCapEquToZeroFlag = FALSE;
+ AllCoreHaveMaxOnePStateFlag = FALSE;
+ PstateMaxValEquToPstateHtcLimitFlag = FALSE;
+ AtLeastOneCoreHasPstateHtcLimitEquToOneFlag = FALSE;
+ PstateMaxValMinusHtcPstateLimitLessThan2Flag = FALSE;
+ PStateBufferPtr = PStateStrucPtr->PStateLevelingStruc;
+ Status = AGESA_SUCCESS;
+
+ if (PStateBufferPtr[0].SetPState0 == PSTATE_FLAG_1) {
+ PStateBufferPtr[0].AllCpusHaveIdenticalPStates = TRUE;
+ PStateBufferPtr[0].InitStruct = 1;
+ return AGESA_UNSUPPORTED;
+ }
+
+ LogicalSocketCount = PStateStrucPtr->TotalSocketInSystem;
+ ASSERT (LogicalSocketCount <= MAX_SOCKETS_SUPPORTED);
+
+ // This section of code will execute only for "core 0" i.e. BSP
+ // Read P-States of all the cores.
+ if (PStateBufferPtr[0].InitStruct == 0) {
+ // Determine 'software' P0 indices for each socket
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ TempSwP0Array[i] = (UINT32) (PStateBufferPtrTmp->PStateCoreStruct[0].NumberOfBoostedStates);
+ }
+
+ // Check if core frequency and power are same across all sockets.
+ TempFlag1 = FALSE;
+ m = TempSwP0Array[0];
+ for (i = 1; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ if ((PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue != PStateBufferPtr[0].PStateCoreStruct[0].PStateMaxValue)) {
+ TempFlag1 = TRUE;
+ break;
+ }
+ MaxPstateInNode = PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue;
+ for (k = TempSwP0Array[i]; k <= MaxPstateInNode; k++, m++) {
+ if ((PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[m].CoreFreq !=
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].CoreFreq) ||
+ (PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[m].Power !=
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].Power)) {
+ TempFlag1 = TRUE;
+ break; // Come out of the inner FOR loop
+ }
+ }
+ if (TempFlag1) {
+ break; // Come out of the outer FOR loop
+ }
+ }
+
+ if (!TempFlag1) {
+ // No need to do pStateLeveling, or writing to pState MSR registers
+ // if all CPUs have Identical PStates
+ PStateBufferPtr[0].AllCpusHaveIdenticalPStates = TRUE;
+ PStateBufferPtr[0].InitStruct = 1;
+ PutAllCoreInPState0 (PStateBufferPtr, StdHeader);
+ return AGESA_UNSUPPORTED;
+ } else {
+ PStateBufferPtr[0].AllCpusHaveIdenticalPStates = FALSE;
+ }
+
+ // 1_b) & 1_c)
+ TempFlag1 = FALSE;
+ TempFlag2 = FALSE;
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ if (PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue == TempSwP0Array[i]) {
+ TempFlag1 = TRUE;
+ } else {
+ TempFlag2 = TRUE;
+ }
+ if (PStateBufferPtrTmp->PStateCoreStruct[0].HtcCapable == 0) {
+ TempFlag3 = TRUE;
+ } else {
+ TempFlag4 = TRUE;
+ }
+
+ if ((PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue -
+ PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit) < 2) {
+ PstateMaxValMinusHtcPstateLimitLessThan2Flag = TRUE;
+ }
+
+ if (PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue ==
+ PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit) {
+ PstateMaxValEquToPstateHtcLimitFlag = TRUE;
+ }
+
+ if (PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit == 1) {
+ AtLeastOneCoreHasPstateHtcLimitEquToOneFlag = TRUE;
+ }
+ }
+
+ // Do general setup of flags, that we may use later
+ // Implementation of (1_b)
+ if (TempFlag1 && TempFlag2) {
+ //
+ //Processors with only one enabled P-state (F3xDC[PstateMaxVal]=000b) cannot be mixed in a system with
+ //processors with more than one enabled P-state (F3xDC[PstateMaxVal]!=000b).
+ //
+ PStateBufferPtr[0].InitStruct = 1;
+ PStateBufferPtr[0].CreateAcpiTables = 0;
+ PutAllCoreInPState0 (PStateBufferPtr, StdHeader);
+ return AGESA_UNSUPPORTED;
+ } else if (TempFlag1 && !TempFlag2) {
+ //
+ //all processors have only 1 enabled P-state
+ //
+ AllCoreHaveMaxOnePStateFlag = TRUE;
+ PStateBufferPtr[0].OnlyOneEnabledPState = TRUE;
+ }
+
+ // Processors with F3xE8[HTC_CAPABLE] = 1 can not be
+ // mixed in system with processors with F3xE8[HTC_CAPABLE] = 0.
+ if (TempFlag3 && TempFlag4) {
+ PStateBufferPtr[0].InitStruct = 1;
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ PStateBufferPtrTmp[0].CreateAcpiTables = 0;
+ }
+ PutAllCoreInPState0 (PStateBufferPtr, StdHeader);
+ return AGESA_UNSUPPORTED;
+ }
+
+ if (TempFlag3) {
+ //
+ //If code run to here means that all processors do not have HTC_CAPABLE.
+ //
+ AllCoresHaveHtcCapEquToZeroFlag = TRUE;
+ }
+
+ //--------------------------------------------------------------------------------
+ // S T E P - 2
+ //--------------------------------------------------------------------------------
+ // Now run the PState Leveling Algorithm which will create mixed CPU P-State
+ // Tables.
+ // Follow the algorithm in the latest BKDG
+ // -------------------------------------------------------------------------------
+ // Match P0 CPU COF for all CPU cores to the lowest P0 CPU COF value in the
+ // coherent fabric, and match P0 power for all CPU cores to the highest P0 power
+ // value in the coherent fabric.
+ // 2_a) If all processors have only 1 enabled P-State BIOS must write the
+ // appropriate CpuFid value resulting from the matched CPU COF to all
+ // copies of MSRC001_0070[CpuFid], and exit the sequence (No further
+ // steps are executed)
+ //--------------------------------------------------------------------------------
+ // Identify the lowest P0 Frequency and maximum P0 Power
+ TempVar_d = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSwP0Array[0]].CoreFreq;
+ TempVar_e = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSwP0Array[0]].Power;
+ TempVar_a = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSwP0Array[0]].IddValue;
+ TempVar_b = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSwP0Array[0]].IddDiv;
+
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ if (TempVar_d > PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].CoreFreq) {
+ TempVar_d = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].CoreFreq;
+ }
+
+ if (TempVar_e < PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].Power) {
+ TempVar_e = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].Power;
+ TempVar_a = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].IddValue;
+ TempVar_b = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].IddDiv;
+ }
+ }
+
+ // Set P0 Frequency and Power for all CPUs
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].CoreFreq = TempVar_d;
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].Power = TempVar_e;
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].IddValue = TempVar_a;
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSwP0Array[i]].IddDiv = TempVar_b;
+ }
+
+ // 2_a)
+ if (!AllCoreHaveMaxOnePStateFlag) {
+ //--------------------------------------------------------------------------
+ // STEP - 3
+ //--------------------------------------------------------------------------
+ // Match the CPU COF and power for P-states used by HTC. Skip to step 4
+ // is any processor reports F3xE8[HTC_Capable] = 0;
+ // 3_a) Set F3x64[HtcPstateLimit] = 001b and F3x68[StcPstateLimit] = 001b for
+ // processors with F3x64[HtcPstateLimit] = 000b.
+ // 3_b) Identify the lowest CPU COF for all processors in the P-state
+ // pointed to by [The Hardware Thermal Control (HTC) Register]
+ // F3x64[HtcPstateLimit]
+ // 3_c) Modify the CPU COF pointed to by [The Hardware Thermal Control
+ // (HTC) Register] F3x64[HtcPstateLimit] for all processors to the
+ // previously identified lowest CPU COF value.
+ // 3_d) Identify the highest power for all processors in the P-state
+ // pointed to by [The Hardware Thermal Control (HTC) Register]
+ // F3x64[HtcPstateLimit].
+ // 3_e) Modify the power pointed to by [The Hardware Thermal Control (HTC)
+ // Register] F3x64[HtcPstateLimit] to the previously identified
+ // highest power value.
+ if (!AllCoresHaveHtcCapEquToZeroFlag) {
+ // 3_a)
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ if (PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit == 0) {
+ // To Be Done (Set Htc and Stc PstateLimit values)
+ // for this CPU (using PCI address space)
+ for (k = 0; k < (UINT8)GetPlatformNumberOfModules (); k++) {
+ if (GetPciAddress (StdHeader, PStateBufferPtrTmp->SocketNumber, k, &PciAddress, &Status)) {
+ // Set F3x64[HtcPstateLimit] = 001b
+ PciAddress.Address.Function = FUNC_3;
+ PciAddress.Address.Register = HARDWARE_THERMAL_CTRL_REG;
+ LibAmdPciRead (AccessWidth32, PciAddress, &TempVar_d, StdHeader);
+ // Bits 30:28
+ TempVar_d = (TempVar_d & 0x8FFFFFFF) | 0x10000000;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &TempVar_d, StdHeader);
+
+ // Set F3x68[StcPstateLimit] = 001b
+ PciAddress.Address.Register = SOFTWARE_THERMAL_CTRL_REG;
+ LibAmdPciRead (AccessWidth32, PciAddress, &TempVar_d, StdHeader);
+ // Bits 28:30
+ TempVar_d = (TempVar_d & 0x8FFFFFFF) | 0x10000000;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &TempVar_d, StdHeader);
+ }
+ }
+ // Set LocalBuffer
+ PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit = 1;
+ if ((PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue - 1) < 2) {
+ PstateMaxValMinusHtcPstateLimitLessThan2Flag = TRUE;
+ }
+
+ if (PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue == 1) {
+ PstateMaxValEquToPstateHtcLimitFlag = TRUE;
+ }
+ }
+
+ if (PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit == 1) {
+ AtLeastOneCoreHasPstateHtcLimitEquToOneFlag = TRUE;
+ }
+ }
+
+ // 3_b) and 3_d)
+ TempVar_a = PStateBufferPtr[0].PStateCoreStruct[0].HtcPstateLimit;
+ TempVar_d = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].CoreFreq;
+ TempVar_e = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].Power;
+ TempVar_f = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].IddValue;
+ TempVar_c = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].IddDiv;
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ for (k = 0; k < 1; k++) {
+ TempVar_b = PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit;
+ if (TempVar_d > PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].CoreFreq) {
+ TempVar_d = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].CoreFreq;
+ }
+
+ if (TempVar_e < PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].Power) {
+ TempVar_e = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].Power;
+ TempVar_f = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].IddValue;
+ TempVar_c = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].IddDiv;
+ }
+ }
+ }
+
+ // 3_c) and 3_e)
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ TempVar_a = PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit;
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].CoreFreq = TempVar_d;
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].Power = TempVar_e;
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].IddValue = TempVar_f;
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].IddDiv = TempVar_c;
+ }
+ } // if(AllCoresHaveHtcCapEquToZeroFlag)
+
+
+ //--------------------------------------------------------------------------
+ // STEP - 4
+ //--------------------------------------------------------------------------
+ // Match the CPU COF and power for the lowest performance P-state:
+ // 4_a) If F3xDC[PstateMaxVal] = F3x64[HtcPstateLimit] for any processor,
+ // set PstateEn = 0 for all the P-states greater than
+ // F3x64[HtcPstateLimit] for all processors.
+ // 4_b) Identify the lowest CPU COF for all processors in the P-state
+ // pointed to by F3xDC[PstateMaxVal].
+ // 4_c) Modify the CPU COF for all processors in the P-state pointed to by
+ // F3xDC[PstateMaxVal] to the previously identified lowest CPU COF
+ // value.
+ // 4_d) Identify the highest power for all processors in the P-state
+ // pointed to by F3xDC[PstateMaxVal].
+ // 4_e) Modify the power for all processors in the P-state pointed to by
+ // F3xDC[PstateMaxVal] to the previously identified highest power
+ // value.
+
+ // 4_a)
+ if (PstateMaxValEquToPstateHtcLimitFlag) {
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ TempVar_b = PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit + 1;
+ for (k = TempVar_b; k <= PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue; k++) {
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].PStateEnable = 0;
+ }
+ //--------------------------------------------------------------------------
+ // STEP - 5
+ //--------------------------------------------------------------------------
+ // 5_a) Modify F3xDC[PstateMaxVal] to indicate the lowest performance
+ // P-state with PstateEn set for each processor (Step 4 can disable
+ // P-states pointed to by F3xDC[PstateMaxVal])
+
+ // Use this value of HtcPstateLimit to program the
+ // F3xDC[pStateMaxValue]
+ TempVar_e = PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit;
+ TempVar_e <<= 8;
+ // Bits 10:8
+
+ for (m = 0; m < (UINT8)GetPlatformNumberOfModules (); m++) {
+ if (GetPciAddress (StdHeader, PStateBufferPtrTmp->SocketNumber, m, &PciAddress, &Status)) {
+ PciAddress.Address.Function = FUNC_3;
+ PciAddress.Address.Register = CLOCK_POWER_TIMING_CTRL2_REG;
+ LibAmdPciRead (AccessWidth32, PciAddress, &TempVar_d, StdHeader);
+ TempVar_d = (TempVar_d & 0xFFFFF8FF) | TempVar_e;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &TempVar_d, StdHeader);
+ }
+ }//End of step 5
+ }
+ }// End of 4_a)
+
+ // 4_b) and 4_d)
+ TempVar_a = PStateBufferPtr[0].PStateCoreStruct[0].PStateMaxValue;
+ TempVar_d = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].CoreFreq;
+ TempVar_e = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].Power;
+ TempVar_f = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].IddValue;
+ TempVar_c = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempVar_a].IddDiv;
+
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ TempVar_b = PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue;
+ if (TempVar_d >
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].CoreFreq) {
+ TempVar_d =
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].CoreFreq;
+ }
+
+ if (TempVar_e < PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].Power) {
+ TempVar_e = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].Power;
+ TempVar_f = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].IddValue;
+ TempVar_c = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_b].IddDiv;
+ }
+ }
+
+ // 4_c) and 4_e)
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ TempVar_a = PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue;
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].CoreFreq = TempVar_d;
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].Power = TempVar_e;
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].IddValue = TempVar_f;
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempVar_a].IddDiv = TempVar_c;
+ }
+
+
+ //--------------------------------------------------------------------------
+ // STEP - 6
+ //--------------------------------------------------------------------------
+ // Match the CPU COF and power for upper intermediate performance
+ // P-state(s):
+ // Upper intermediate PStates = PStates between (Not including) P0 and
+ // F3x64[HtcPstateLimit]
+ // 6_a) If F3x64[HtcPstateLimit] = 001b for any processor, set PstateEn = 0
+ // for enabled upper intermediate P-states for all processors with
+ // F3x64[HtcPstateLimit] > 001b and skip the remaining actions for
+ // this numbered step.
+ // 6_b) Define each of the available upper intermediate P-states; for each
+ // processor concurrently evaluate the following loop; when any
+ // processor falls out of the loop (runs out of available upper
+ // intermediate Pstates) all other processors have their remaining
+ // upper intermediate P-states invalidated (PstateEn = 0);
+ // for (i = F3x64[HtcPstateLimit] - 1; i > 0; i--)
+ // - Identify the lowest CPU COF for P(i).
+ // - Identify the highest power for P(i).
+ // - Modify P(i) CPU COF for all processors to the previously
+ // identified lowest CPU COF value.
+ // - Modify P(i) power for all processors to the previously
+ // identified highest power value.
+
+ // 6_a)
+ if (AtLeastOneCoreHasPstateHtcLimitEquToOneFlag) {
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ for (k = TempSwP0Array[i] + 1; k < (PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit); k++) {
+ if (PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit > 1) {
+ // Make a function call to clear the
+ // structure values
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].PStateEnable = 0;
+ }
+ }
+ }
+ }
+ // 6_b)
+ else {
+ // Identify Lowest Frequency and Highest Power
+ TotalIterations = 0;
+ TempFlag1 = TRUE;
+
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ TempSocketPiArray[i] = PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit - 1;
+ }
+
+ do {
+ //For first socket, try to find a candidate
+ if (TempSocketPiArray[0] != TempSwP0Array[0]) {
+ while (PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].PStateEnable == 0) {
+ TempSocketPiArray[0] = TempSocketPiArray[0] - 1;
+ if (TempSocketPiArray[0] == TempSwP0Array[0]) {
+ TempFlag1 = FALSE;
+ break;
+ }
+ }
+ } else {
+ TempFlag1 = FALSE;
+ }
+ if (TempFlag1) {
+ TempFreqArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].CoreFreq;
+ TempPowerArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].Power;
+ TempIddValueArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].IddValue;
+ TempIddDivArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].IddDiv;
+
+ //Try to find next candidate
+ for (i = 1; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ if (TempSocketPiArray[i] != TempSwP0Array[i]) {
+ while (PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].PStateEnable == 0) {
+ TempSocketPiArray[i]--;
+ if (TempSocketPiArray[i] == TempSwP0Array[i]) {
+ TempFlag1 = FALSE;
+ break;
+ }
+ }//end while
+ } else {
+ TempFlag1 = FALSE;
+ }
+
+ } //end for LogicalSocketCount
+ }
+
+ if (TempFlag1) {
+ for (i = 0; i < LogicalSocketCount; i++) {
+ //
+ //Compare
+ //
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ if (TempFreqArray[TotalIterations] > PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].CoreFreq) {
+ TempFreqArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].CoreFreq;
+ }
+
+ if (TempPowerArray[TotalIterations] < PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].Power) {
+ TempPowerArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].Power;
+ TempIddValueArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddValue;
+ TempIddDivArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddDiv;
+ }
+ }
+ // Modify (Pi) CPU COF and Power for all the CPUs
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].CoreFreq = TempFreqArray[TotalIterations];
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].Power = TempPowerArray[TotalIterations];
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddValue = TempIddValueArray[TotalIterations];
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddDiv = TempIddDivArray[TotalIterations];
+ TempSocketPiArray[i] = TempSocketPiArray[i] - 1;
+ }
+ } else {
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ for (m = TempSocketPiArray[i]; m > TempSwP0Array[i]; m--) {
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[m].PStateEnable = 0;
+ }
+ }
+ }
+
+ TotalIterations++;
+ } while (TempFlag1);
+
+ } // else
+
+ //--------------------------------------------------------------------------
+ // STEP - 7
+ //--------------------------------------------------------------------------
+ // Match the CPU COF and power for lower intermediate performance P - state(s)
+ // Lower Intermediate Pstates = Pstates between (not including)
+ // F3x64[HtcPstateLimit] and F3xDC[PstateMaxVal]
+ // 7_a) If F3xDC[PstateMaxVal] - F3x64[HtcPstateLimit] < 2 for any
+ // processor, set PstateEn = 0 for enabled lower intermediate P - states
+ // for all processors with (F3xDC[PstateMaxVal] -
+ // F3x64[HtcPstateLimit] > 1) and skip the remaining actions for this
+ // numbered step.
+ // 7_b) Define each of the available lower intermediate P-states; for each
+ // processor concurrently evaluate the following loop; when any
+ // processor falls out of the loop (runs out of available lower
+ // intermediate Pstates) all other processors have their remaining
+ // lower intermediate P-states invalidated (PstateEn = 0);
+ // for (i = F3xDC[PstateMaxVal]-1; i > F3x64[HtcPstateLimit]; i--)
+ // - Identify the lowest CPU COF for P-states between
+ // (not including) F3x64[HtcPstateLimit] and P(i).
+ // - Identify the highest power for P-states between
+ // (not including) F3x64[HtcPstateLimit] and P(i).
+ // - Modify P(i) CPU COF for all processors to the previously
+ // identified lowest CPU COF value.
+ // - Modify P(i) power for all processors to the previously
+ // identified highest power value.
+
+
+ // 7_a)
+ if (PstateMaxValMinusHtcPstateLimitLessThan2Flag) {
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+
+ for (k = PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue - 1;
+ k > PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit;
+ k--) {
+ if ((PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue -
+ PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit) > 1) {
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].PStateEnable = 0;
+ }
+ }
+ }
+ }
+
+ // 7_b)
+ else {
+ // Identify Lowest Frequency and Highest Power
+
+ TotalIterations = 0;
+ TempFlag1 = TRUE;
+
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ TempSocketPiArray[i] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue - 1;
+ }
+
+ do {
+ //For first socket, try to find a candidate
+ if (TempSocketPiArray[0] != PStateBufferPtr[0].PStateCoreStruct[0].HtcPstateLimit) {
+ while (PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].PStateEnable == 0) {
+ TempSocketPiArray[0] = TempSocketPiArray[0] - 1;
+ if (TempSocketPiArray[0] == PStateBufferPtr[0].PStateCoreStruct[0].HtcPstateLimit) {
+ TempFlag1 = FALSE;
+ break;
+ }
+ }
+ } else {
+ TempFlag1 = FALSE;
+ }
+ if (TempFlag1) {
+ TempFreqArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].CoreFreq;
+ TempPowerArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].Power;
+ TempIddValueArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].IddValue;
+ TempIddDivArray[TotalIterations] = PStateBufferPtr[0].PStateCoreStruct[0].PStateStruct[TempSocketPiArray[0]].IddDiv;
+
+ //Try to find next candidate
+ for (i = 1; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ if (TempSocketPiArray[i] != PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit) {
+ while (PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].PStateEnable == 0) {
+ TempSocketPiArray[i]--;
+ if (TempSocketPiArray[i] == PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit) {
+ TempFlag1 = FALSE;
+ break;
+ }
+ }//end while
+ } else {
+ TempFlag1 = FALSE;
+ }
+ } //end for LogicalSocketCount
+ }
+
+ if (TempFlag1) {
+ for (i = 0; i < LogicalSocketCount; i++) {
+ //
+ //Compare
+ //
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ if (TempFreqArray[TotalIterations] > PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].CoreFreq) {
+ TempFreqArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].CoreFreq;
+ }
+ if (TempPowerArray[TotalIterations] < PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].Power) {
+ TempPowerArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].Power;
+ TempIddValueArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddValue;
+ TempIddDivArray[TotalIterations] = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddDiv;
+ }
+ }
+ // Modify (Pi) CPU COF and Power for all the CPUs
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].CoreFreq = TempFreqArray[TotalIterations];
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].Power = TempPowerArray[TotalIterations];
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddValue = TempIddValueArray[TotalIterations];
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[TempSocketPiArray[i]].IddDiv = TempIddDivArray[TotalIterations];
+ TempSocketPiArray[i] = TempSocketPiArray[i] - 1;
+ }
+ } else {
+ for (i = 0; i < LogicalSocketCount; i++) {
+ CpuGetPStateLevelStructure (&PStateBufferPtrTmp, PStateStrucPtr, i, StdHeader);
+ for (m = TempSocketPiArray[i]; m > PStateBufferPtrTmp->PStateCoreStruct[0].HtcPstateLimit; m--) {
+ PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[m].PStateEnable = 0;
+ }
+ }
+ }
+ TotalIterations++;
+ } while (TempFlag1);
+ } // else
+ } // if(!AllCoreHaveMaxOnePStateFlag)
+
+ PStateBufferPtr[0].InitStruct = 1;
+ } // CurrentCore
+
+
+ // Update the pState MSRs
+ // This can be done only by individual core
+ StartPstateMsrModify (PStateStrucPtr, StdHeader);
+
+ //----------------------------------------------------------------------------------
+ // STEP - 8
+ //----------------------------------------------------------------------------------
+ // Place all cores into a valid COF and VID configuration corresponding to an
+ // enabled P-state:
+ // 8_a) Select an enabled P-state != to the P-state pointed to by
+ // MSRC001_0063[CurPstate] for each core.
+ // 8_b) Transition all cores to the selected P-states by writing the Control value
+ // from the_PSS object corresponding to the selected P-state to
+ // MSRC001_0062[PstateCmd].
+ // 8_c) Wait for all cores to report the Status value from the _PSS object
+ // corresponding to the selected P-state in MSRC001_0063[CurPstate].
+ //
+ PutAllCoreInPState0 (PStateBufferPtr, StdHeader);
+
+ return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ * PutAllCoreInPState0
+ *
+ * Description:
+ * This function will put core pstate to p0.
+ *
+ * Parameters:
+ * @param[in,out] *PStateBufferPtr
+ * @param[in] *StdHeader
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+PutAllCoreInPState0 (
+ IN OUT PSTATE_LEVELING *PStateBufferPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AP_TASK TaskPtr;
+ UINT32 BscSocket;
+ UINT32 Ignored;
+ UINT32 BscCoreNum;
+ UINT32 Core;
+ UINT32 Socket;
+ UINT32 NumberOfSockets;
+ UINT32 NumberOfCores;
+ AGESA_STATUS IgnoredSts;
+
+ TaskPtr.FuncAddress.PfApTaskI = PutCoreInPState0;
+ TaskPtr.DataTransfer.DataSizeInDwords = SIZE_IN_DWORDS (PSTATE_LEVELING);
+ TaskPtr.ExeFlags = WAIT_FOR_CORE;
+ TaskPtr.DataTransfer.DataPtr = PStateBufferPtr;
+ TaskPtr.DataTransfer.DataTransferFlags = DATA_IN_MEMORY;
+
+ IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+
+ PutCoreInPState0 (PStateBufferPtr, StdHeader);
+
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+ for (Core = 0; Core < NumberOfCores; Core++) {
+ if ((Socket != (UINT32) BscSocket) || (Core != (UINT32) BscCoreNum)) {
+ ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+ }
+ }
+ }
+ }
+
+ return AGESA_SUCCESS;
+}
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ * CorePstateRegModify
+ *
+ * Description:
+ * This function will setting the Pstate MSR to each APs base on Pstate Buffer.
+ * Note: This function should be called for every core in the system.
+ *
+ * Parameters:
+ * @param[in,out] *CpuAmdPState
+ * @param[in] *StdHeader
+ *
+ * @retval VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+CorePstateRegModify (
+ IN VOID *CpuAmdPState,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PSTATE_CPU_FAMILY_SERVICES *FamilySpecificServices;
+ FamilySpecificServices = NULL;
+
+ GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilySpecificServices, StdHeader);
+ ASSERT (FamilySpecificServices != NULL)
+ FamilySpecificServices->SetPStateLevelReg (FamilySpecificServices, (S_CPU_AMD_PSTATE *) CpuAmdPState, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will set msr on all cores of all nodes.
+ *
+ * @param[in] CpuAmdPState Pointer to S_CPU_AMD_PSTATE.
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @retval AGESA_SUCCESS Always succeeds
+ *
+ */
+AGESA_STATUS
+StartPstateMsrModify (
+ IN S_CPU_AMD_PSTATE *CpuAmdPState,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AP_TASK TaskPtr;
+ UINT32 BscSocket;
+ UINT32 Ignored;
+ UINT32 BscCoreNum;
+ UINT32 Core;
+ UINT32 Socket;
+ UINT32 NumberOfSockets;
+ UINT32 NumberOfCores;
+ AGESA_STATUS IgnoredSts;
+
+ TaskPtr.FuncAddress.PfApTaskI = CorePstateRegModify;
+ TaskPtr.DataTransfer.DataSizeInDwords = (UINT16) (CpuAmdPState->SizeOfBytes / 4 + 1);
+ TaskPtr.ExeFlags = WAIT_FOR_CORE;
+ TaskPtr.DataTransfer.DataPtr = CpuAmdPState;
+ TaskPtr.DataTransfer.DataTransferFlags = DATA_IN_MEMORY;
+
+ IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+
+ CorePstateRegModify (CpuAmdPState, StdHeader);
+
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+ for (Core = 0; Core < NumberOfCores; Core++) {
+ if ((Socket != (UINT32) BscSocket) || (Core != (UINT32) BscCoreNum)) {
+ ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+ }
+ }
+ }
+ }
+
+ return AGESA_SUCCESS;
+}
+
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ * CpuGetPStateLevelStructure
+ *
+ * Description:
+ * Based on the LogicalSocketNumber, this function will return a pointer
+ * point to the accurate offset of the PSTATE_LEVELING structure.
+ *
+ * Parameters:
+ * @param[in,out] *PStateBufferPtr
+ * @param[in] *CpuAmdPState
+ * @param[in] LogicalSocketNumber
+ * @param[in] *StdHeader
+ *
+ * @retval VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+CpuGetPStateLevelStructure (
+ OUT PSTATE_LEVELING **PStateBufferPtr,
+ IN S_CPU_AMD_PSTATE *CpuAmdPState,
+ IN UINT32 LogicalSocketNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PSTATE_LEVELING *PStateBufferPtrTmp;
+ UINT32 i;
+
+ if (LogicalSocketNumber > CpuAmdPState->TotalSocketInSystem) {
+ return AGESA_UNSUPPORTED;
+ }
+
+ PStateBufferPtrTmp = CpuAmdPState->PStateLevelingStruc;
+
+ for (i = 1; i <= LogicalSocketNumber; i++) {
+ PStateBufferPtrTmp = (PSTATE_LEVELING *) ((UINT8 *) PStateBufferPtrTmp + ((UINTN) PStateBufferPtrTmp->PStateLevelingSizeOfBytes));
+ }
+
+ *PStateBufferPtr = PStateBufferPtrTmp;
+
+ return AGESA_SUCCESS;
+}
+
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ * PutCoreInPState0
+ *
+ * Description:
+ * This function will take the CPU core into P0
+ *
+ * Parameters:
+ * @param[in] *PStateBuffer
+ * @param[in] *StdHeader
+ *
+ * @retval VOID
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+STATIC
+PutCoreInPState0 (
+ IN VOID *PStateBuffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ PSTATE_LEVELING *PStateBufferPtr;
+
+ PStateBufferPtr = (PSTATE_LEVELING *) PStateBuffer;
+
+ if ((PStateBufferPtr[0].SetPState0 == PSTATE_FLAG_1 ) ||
+ (PStateBufferPtr[0].SetPState0 == PSTATE_FLAG_2)) {
+ return;
+ }
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+ FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) 0, (BOOLEAN) FALSE, StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateTables.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateTables.c
new file mode 100644
index 0000000..3be6fea
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateTables.c
@@ -0,0 +1,940 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD PSTATE, ACPI table related API functions.
+ *
+ * Contains code that generates the _PSS, _PCT, and other ACPI tables.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionPstate.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "heapManager.h"
+#include "Ids.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+#include "cpuPstateTables.h"
+#include "cpuFeatures.h"
+#include "cpuIoCstate.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FEATURE_CPUPSTATETABLES_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_PSTATE_LATE_CONFIGURATION OptionPstateLateConfiguration; // global user config record
+extern CPU_FAMILY_SUPPORT_TABLE PstateFamilyServiceTable;
+extern CPU_FAMILY_SUPPORT_TABLE IoCstateFamilyServiceTable;
+
+STATIC ACPI_TABLE_HEADER ROMDATA CpuSsdtHdrStruct =
+{
+ {'S','S','D','T'},
+ 0,
+ 1,
+ 0,
+ {0},
+ {0},
+ 1,
+ {'A','M','D',' '},
+ 1
+};
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+UINT32
+STATIC
+CalAcpiTablesSize (
+ IN S_CPU_AMD_PSTATE *AmdPstatePtr,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GenerateSsdtStub (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT VOID **SsdtPtr
+ );
+
+UINT32
+CreateAcpiTablesStub (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PSTATE_LEVELING *PStateLevelingBuffer,
+ IN OUT VOID **SsdtPtr,
+ IN UINT8 LocalApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+CreatePStateAcpiTables (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PSTATE_LEVELING *PStateLevelingBuffer,
+ IN OUT VOID **SsdtPtr,
+ IN UINT8 LocalApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+CreateCStateAcpiTables (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PSTATE_LEVELING *PStateLevelingBuffer,
+ IN OUT VOID **SsdtPtr,
+ IN UINT8 LocalApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GenerateSsdt (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT VOID **SsdtPtr
+ );
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ * CalAcpiTablesSize
+ *
+ * Description:
+ * This function will calculate the size of ACPI PState tables
+ *
+ * Parameters:
+ * @param[in] *AmdPstatePtr
+ * @param[in] *PlatformConfig
+ * @param[in] *StdHeader
+ *
+ * @retval UINT32
+ *
+ *---------------------------------------------------------------------------------------
+ */
+UINT32
+STATIC
+CalAcpiTablesSize (
+ IN S_CPU_AMD_PSTATE *AmdPstatePtr,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 ScopeSize;
+ UINT32 CoreCount;
+ UINT32 SocketCount;
+ UINT32 MaxCoreNumberInCurrentSocket;
+ UINT32 MaxSocketNumberInSystem;
+ UINT32 MaxPstateNumberInCurrentCore;
+ UINT32 CstateAcpiObjSize;
+ PSTATE_LEVELING *PStateLevelingBufferStructPtr;
+ IO_CSTATE_FAMILY_SERVICES *IoCstateFamilyServices;
+
+ ScopeSize = sizeof (ACPI_TABLE_HEADER);
+ CstateAcpiObjSize = 0;
+ IoCstateFamilyServices = NULL;
+
+ PStateLevelingBufferStructPtr = AmdPstatePtr->PStateLevelingStruc;
+ MaxSocketNumberInSystem = AmdPstatePtr->TotalSocketInSystem;
+
+ if (IsFeatureEnabled (IoCstate, PlatformConfig, StdHeader)) {
+ GetFeatureServicesOfCurrentCore (&IoCstateFamilyServiceTable, (CONST VOID **)&IoCstateFamilyServices, StdHeader);
+ if (IoCstateFamilyServices != NULL) {
+ CstateAcpiObjSize = IoCstateFamilyServices->GetAcpiCstObj (IoCstateFamilyServices, PlatformConfig, StdHeader);
+ }
+ }
+
+ for (SocketCount = 0; SocketCount < MaxSocketNumberInSystem; SocketCount++) {
+ MaxCoreNumberInCurrentSocket = PStateLevelingBufferStructPtr->TotalCoresInNode;
+ for (CoreCount = 0; CoreCount < MaxCoreNumberInCurrentSocket; CoreCount++) {
+ MaxPstateNumberInCurrentCore = PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateMaxValue + 1;
+
+ ScopeSize += (SCOPE_STRUCT_SIZE - 1); // Scope size per core
+ ScopeSize += CstateAcpiObjSize; // C-State ACPI objects size per core
+
+ // Add P-State ACPI Objects size per core
+ if ((PStateLevelingBufferStructPtr[0].CreateAcpiTables != 0) && (PlatformConfig->UserOptionPState)) {
+ ScopeSize += (PCT_STRUCT_SIZE +
+ PSS_HEADER_STRUCT_SIZE +
+ (MaxPstateNumberInCurrentCore * PSS_BODY_STRUCT_SIZE) +
+ XPSS_HEADER_STRUCT_SIZE +
+ (MaxPstateNumberInCurrentCore * XPSS_BODY_STRUCT_SIZE) +
+ PSD_HEADER_STRUCT_SIZE +
+ PSD_BODY_STRUCT_SIZE +
+ PPC_HEADER_BODY_STRUCT_SIZE);
+ }
+ }
+ ScopeSize += MaxCoreNumberInCurrentSocket;
+ PStateLevelingBufferStructPtr = (PSTATE_LEVELING *) ((UINT8 *) PStateLevelingBufferStructPtr + (UINTN) sizeof (PSTATE_LEVELING) + (UINTN) (PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+ }
+ AmdPstatePtr->SizeOfBytes = ScopeSize;
+
+ return ScopeSize;
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ * GenerateSsdtStub
+ *
+ * Description:
+ * This is the default routine for use when both PState and CState option is NOT
+ * requested. The option install process will create and fill the transfer vector
+ * with the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ * Parameters:
+ * @param[in] StdHeader Handle to config for library and services
+ * @param[in] PlatformConfig Contains the power cap parameter
+ * @param[in,out] SsdtPtr ACPI SSDT table pointer
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+GenerateSsdtStub (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT VOID **SsdtPtr
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+
+/**
+ *---------------------------------------------------------------------------------------
+ *
+ * GenerateSsdt
+ *
+ * Description:
+ * This function will populate the SSDT with ACPI P-States and C-States Objects, whenever
+ * necessary
+ * This function should be called only from BSP
+ *
+ * Parameters:
+ * @param[in] StdHeader Handle to config for library and services
+ * @param[in] PlatformConfig Contains the power cap parameter
+ * @param[in,out] SsdtPtr ACPI SSDT pointer
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GenerateSsdt (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT VOID **SsdtPtr
+ )
+{
+ UINT32 i;
+ UINT32 j;
+ UINT32 TempVar8_a;
+ UINT32 CurrSize;
+ UINT32 TempVar_a;
+ UINT32 TempVar_b;
+ UINT32 ScopeSize;
+ UINT32 CoreCount;
+ UINT32 SocketCount;
+ UINT32 MaxCorePerNode;
+ UINT8 LocalApicId;
+ UINT8 *IntermediatePtr;
+ AGESA_STATUS AgesaStatus;
+ LOCATE_HEAP_PTR LocateHeapParams;
+ ALLOCATE_HEAP_PARAMS AllocateHeapParams;
+ S_CPU_AMD_PSTATE *AmdPstatePtr;
+ PSTATE_LEVELING *PStateLevelingBufferStructPtr;
+ SCOPE *ScopeAcpiTablesStructPtr;
+ SCOPE *ScopeAcpiTablesStructPtrTemp;
+
+ AGESA_TESTPOINT (TpProcCpuEntryPstate, StdHeader);
+
+ ASSERT (IsBsp (StdHeader, &AgesaStatus));
+
+ // If P-State and C-State ACPI tables do not need to be generated, exit this routine
+ if ((!PlatformConfig->UserOptionPState) && (!IsFeatureEnabled (IoCstate, PlatformConfig, StdHeader))) {
+ AgesaStatus = AGESA_UNSUPPORTED;
+ return AgesaStatus;
+ }
+
+ // Initialize data variables
+ ScopeSize = 0;
+ CoreCount = 0;
+ LocalApicId = 0;
+ CurrSize = 0;
+
+ // Locate P-State data buffer
+ LocateHeapParams.BufferHandle = AMD_PSTATE_DATA_BUFFER_HANDLE;
+ AGESA_TESTPOINT (TpProcCpuBeforeLocateSsdtBuffer, StdHeader);
+ if (HeapLocateBuffer (&LocateHeapParams, StdHeader) != AGESA_SUCCESS) {
+ return AGESA_ERROR;
+ }
+ AGESA_TESTPOINT (TpProcCpuAfterLocateSsdtBuffer, StdHeader);
+
+ AmdPstatePtr = (S_CPU_AMD_PSTATE *) LocateHeapParams.BufferPtr;
+ PStateLevelingBufferStructPtr = AmdPstatePtr->PStateLevelingStruc;
+
+ // Allocate rough buffer for AcpiTable, if SsdtPtr is NULL
+ if (*SsdtPtr == NULL) {
+ //Do not know the actual size.. pre-calculate it.
+ AllocateHeapParams.RequestedBufferSize = CalAcpiTablesSize (AmdPstatePtr, PlatformConfig, StdHeader);
+ AllocateHeapParams.BufferHandle = AMD_PSTATE_ACPI_BUFFER_HANDLE;
+ AllocateHeapParams.Persist = HEAP_SYSTEM_MEM;
+
+ AGESA_TESTPOINT (TpProcCpuBeforeAllocateSsdtBuffer, StdHeader);
+ if (HeapAllocateBuffer (&AllocateHeapParams, StdHeader) != AGESA_SUCCESS) {
+ return AGESA_ERROR;
+ }
+ AGESA_TESTPOINT (TpProcCpuAfterAllocateSsdtBuffer, StdHeader);
+ *SsdtPtr = AllocateHeapParams.BufferPtr;
+ }
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " SSDT is created\n");
+
+ // Copy SSDT header into allocated buffer
+ LibAmdMemCopy (*SsdtPtr, (VOID *) &CpuSsdtHdrStruct, (UINTN) (sizeof (ACPI_TABLE_HEADER)), StdHeader);
+ // Update table OEM fields.
+ LibAmdMemCopy ((VOID *) ((ACPI_TABLE_HEADER *) *SsdtPtr)->OemId, (VOID *) &OptionPstateLateConfiguration.OemIdString,
+ sizeof (OptionPstateLateConfiguration.OemIdString), StdHeader);
+ LibAmdMemCopy ((VOID *) ((ACPI_TABLE_HEADER *) *SsdtPtr)->OemTableId, (VOID *) &OptionPstateLateConfiguration.OemTableIdString,
+ sizeof (OptionPstateLateConfiguration.OemTableIdString), StdHeader);
+ IntermediatePtr = (UINT8 *) *SsdtPtr;
+ ScopeAcpiTablesStructPtr = (SCOPE *) &IntermediatePtr[sizeof (ACPI_TABLE_HEADER)];
+
+ SocketCount = AmdPstatePtr->TotalSocketInSystem;
+
+ // Generate name scope and ACPI objects for every core in the system
+ for (i = 0; i < SocketCount; i++) {
+ MaxCorePerNode = PStateLevelingBufferStructPtr->TotalCoresInNode;
+ for (j = 0; j < MaxCorePerNode; j++) {
+ CoreCount++;
+ // Set Name Scope for CPU0, 1, 2, ..... n
+ // CPU0 to CPUn will name as C000 to Cnnn
+ // -----------------------------------------
+ ScopeAcpiTablesStructPtr->ScopeOpcode = SCOPE_OPCODE;
+ // This value will be filled at the end of this function
+ // Since at this time, we don't know how many Pstates we
+ // would have
+ ScopeAcpiTablesStructPtr->ScopeLength = 0;
+ ScopeAcpiTablesStructPtr->ScopeValue1 = SCOPE_VALUE1;
+ ScopeAcpiTablesStructPtr->ScopeValue2 = SCOPE_VALUE2;
+ ScopeAcpiTablesStructPtr->ScopeNamePt1a__ = SCOPE_NAME__;
+ if (PlatformConfig->ProcessorScopeInSb) {
+ ScopeAcpiTablesStructPtr->ScopeNamePt1a_P = SCOPE_NAME_S;
+ ScopeAcpiTablesStructPtr->ScopeNamePt1a_R = SCOPE_NAME_B;
+ } else {
+ ScopeAcpiTablesStructPtr->ScopeNamePt1a_P = SCOPE_NAME_P;
+ ScopeAcpiTablesStructPtr->ScopeNamePt1a_R = SCOPE_NAME_R;
+ }
+ ScopeAcpiTablesStructPtr->ScopeNamePt1b__ = SCOPE_NAME__;
+ ASSERT ((PlatformConfig->ProcessorScopeName0 >= 'A') && (PlatformConfig->ProcessorScopeName0 <= 'Z'));
+ ASSERT (((PlatformConfig->ProcessorScopeName1 >= 'A') && (PlatformConfig->ProcessorScopeName1 <= 'Z')) || \
+ ((PlatformConfig->ProcessorScopeName1 >= '0') && (PlatformConfig->ProcessorScopeName1 <= '9')) || \
+ (PlatformConfig->ProcessorScopeName1 == '_'));
+
+ ScopeAcpiTablesStructPtr->ScopeNamePt2a_C = PlatformConfig->ProcessorScopeName0;
+ ScopeAcpiTablesStructPtr->ScopeNamePt2a_P = PlatformConfig->ProcessorScopeName1;
+
+ TempVar8_a = ((CoreCount - 1) >> 4) & 0x0F;
+ ScopeAcpiTablesStructPtr->ScopeNamePt2a_U = (UINT8) (SCOPE_NAME_0 + TempVar8_a);
+
+ TempVar8_a = (CoreCount - 1) & 0x0F;
+ if (TempVar8_a < 0xA) {
+ ScopeAcpiTablesStructPtr->ScopeNamePt2a_0 = (UINT8) (SCOPE_NAME_0 + TempVar8_a);
+ } else {
+ ScopeAcpiTablesStructPtr->ScopeNamePt2a_0 = (UINT8) (SCOPE_NAME_A + TempVar8_a - 0xA);
+ }
+ // Increment and typecast the pointer
+ ScopeAcpiTablesStructPtrTemp = ScopeAcpiTablesStructPtr;
+ ScopeAcpiTablesStructPtrTemp++;
+
+ // Get the Local Apic Id for each core
+ LocalApicId = PStateLevelingBufferStructPtr->PStateCoreStruct[0].LocalApicId + (UINT8) j;
+
+ // Create P-State ACPI Objects
+ CurrSize += ((*(OptionPstateLateConfiguration.PstateFeature)) (PlatformConfig, PStateLevelingBufferStructPtr, (VOID *) &ScopeAcpiTablesStructPtrTemp, LocalApicId, StdHeader));
+
+ // Create C-State ACPI Objects
+ CurrSize += ((*(OptionPstateLateConfiguration.CstateFeature)) (PlatformConfig, PStateLevelingBufferStructPtr, (VOID *) &ScopeAcpiTablesStructPtrTemp, LocalApicId, StdHeader));
+
+ // Now update the SCOPE Length field
+ {
+ CurrSize += (SCOPE_STRUCT_SIZE - 1);
+ ScopeSize += CurrSize;
+
+ TempVar_b = ((CurrSize << 4) & 0x0000FF00);
+ TempVar_b |= ((CurrSize & 0x0000000F) | 0x00000040);
+ TempVar_a = TempVar_b;
+ ScopeAcpiTablesStructPtr->ScopeLength = (UINT16) TempVar_a;
+ CurrSize = 0;
+ }
+
+ ScopeAcpiTablesStructPtr = ScopeAcpiTablesStructPtrTemp;
+ }
+ //Calculate next node buffer address
+ PStateLevelingBufferStructPtr = (PSTATE_LEVELING *) ((UINT8 *) PStateLevelingBufferStructPtr + (UINTN) sizeof (PSTATE_LEVELING) + (UINTN) (PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateMaxValue * sizeof (S_PSTATE_VALUES)));
+ }
+ //Update SSDT header Checksum
+ ((ACPI_TABLE_HEADER *) *SsdtPtr)->TableLength = (ScopeSize + CoreCount + sizeof (ACPI_TABLE_HEADER));
+ ChecksumAcpiTable ((ACPI_TABLE_HEADER *) *SsdtPtr, StdHeader);
+
+ return AGESA_SUCCESS;
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ * CreateAcpiTablesStub
+ *
+ * Description:
+ * This is the default routine for use when the P-State or C-State option is NOT
+ * requested. The option install process will create and fill the transfer vector
+ * with the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ * Parameters:
+ * @param[in] PlatformConfig Platform operational characteristics; power cap
+ * @param[in] PStateLevelingBuffer Buffer that contains P-State Leveling information
+ * @param[in,out] SsdtPtr ACPI SSDT table pointer
+ * @param[in] LocalApicId Local Apic Id
+ * @param[in] StdHeader Handle to config for library and services
+ *
+ * @retval Size of generated ACPI objects
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+UINT32
+CreateAcpiTablesStub (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PSTATE_LEVELING *PStateLevelingBuffer,
+ IN OUT VOID **SsdtPtr,
+ IN UINT8 LocalApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return 0;
+}
+
+
+/**--------------------------------------------------------------------------------------
+ *
+ * CreatePStateAcpiTables
+ *
+ * Description:
+ * This is the common routine for creating ACPI P-State objects
+ *
+ * Parameters:
+ * @param[in] PlatformConfig Platform operational characteristics; power cap
+ * @param[in] PStateLevelingBuffer Buffer that contains P-State Leveling information
+ * @param[in,out] SsdtPtr ACPI SSDT table pointer
+ * @param[in] LocalApicId Local Apic Id
+ * @param[in] StdHeader Handle to config for library and services
+ *
+ * @retval Size of generated ACPI P-States objects
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+UINT32
+CreatePStateAcpiTables (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PSTATE_LEVELING *PStateLevelingBuffer,
+ IN OUT VOID **SsdtPtr,
+ IN UINT8 LocalApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 PstateCapLevelSupport;
+ UINT8 PStateMaxValueOnCurrentCore;
+ BOOLEAN PstateCapEnable;
+ BOOLEAN PstateCapLevelSupportDetermined;
+ BOOLEAN IsPsdDependent;
+ UINT32 k;
+ UINT32 TempVar_a;
+ UINT32 TempVar_b;
+ UINT32 TempVar_c;
+ UINT32 PstateCapInputMilliWatts;
+ UINT32 CurrSize;
+ UINT32 PstateCount;
+ UINT32 CoreCount1;
+ UINT32 TransAndBusMastLatency;
+ UINT32 EffectivePstatesPsdPolicy;
+ AGESA_STATUS IgnoredStatus;
+ PCI_ADDR PciAddress;
+ PCT_HEADER_BODY *pPctAcpiTables;
+ PSS_HEADER *pPssHeaderAcpiTables;
+ PSS_BODY *pPssBodyAcpiTables;
+ XPSS_HEADER *pXpssHeaderAcpiTables;
+ XPSS_BODY *pXpssBodyAcpiTables;
+ PSD_HEADER *pPsdHeaderAcpiTables;
+ PSD_BODY *pPsdBodyAcpiTables;
+ PPC_HEADER_BODY *pPpcAcpiTables;
+ PSTATE_CPU_FAMILY_SERVICES *FamilyServices;
+
+ CurrSize = 0;
+ PstateCount = 0;
+ PstateCapEnable = FALSE;
+ PstateCapLevelSupport = DEFAULT_PERF_PRESENT_CAP;
+ PstateCapLevelSupportDetermined = TRUE;
+ PstateCapInputMilliWatts = PlatformConfig->PowerCeiling;
+ ASSERT (PlatformConfig->PstatesPsdPolicy < PsdPolicyMax);
+
+ EffectivePstatesPsdPolicy = PlatformConfig->PstatesPsdPolicy;
+ // Runtime P-state dependence settings conflict check and consolidation
+ if (PlatformConfig->ForcePstateIndependent) {
+ switch (EffectivePstatesPsdPolicy) {
+ case PsdPolicyProcessorDefault:
+ // Consolidate P-state dependence setings
+ EffectivePstatesPsdPolicy = PsdPolicyIndependent;
+ break;
+ case PsdPolicyDependent:
+ // Ensure P-state dependence settings do not conflict
+ IDS_HDT_CONSOLE (CPU_TRACE, " P-state PSD dependence settings conflict between ForcePstateIndependent and PstatesPsdPolicy. PstatesPsdPolicy will take precedence.\n");
+ ASSERT (FALSE);
+ break;
+ case PsdPolicyIndependent:
+ // Do nothing. Two interfaces have the same setting.
+ break;
+ default:
+ // Invalid setting, overrides to processor default.
+ IDS_HDT_CONSOLE (CPU_TRACE, " P-state PSD dependence settings invalid! Override PstatesPsdPolicy to PsdPolicyProcessorDefault.\n");
+ EffectivePstatesPsdPolicy = PsdPolicyProcessorDefault;
+ break;
+ }
+ }
+
+ TransAndBusMastLatency = 0;
+
+ if ((PStateLevelingBuffer[0].CreateAcpiTables != 0) && (PlatformConfig->UserOptionPState)) {
+ pPctAcpiTables = (PCT_HEADER_BODY *) *SsdtPtr;
+
+ //Check Pstate Capability
+ if (PstateCapInputMilliWatts != 0) {
+ PstateCapEnable = TRUE;
+ PstateCapLevelSupportDetermined = FALSE;
+ }
+
+ PStateMaxValueOnCurrentCore = PStateLevelingBuffer->PStateCoreStruct[0].PStateMaxValue;
+ if (OptionPstateLateConfiguration.CfgPstatePct) {
+ // Set _PCT Table
+ // --------------
+ pPctAcpiTables->NameOpcode = NAME_OPCODE;
+ pPctAcpiTables->PctName_a__ = PCT_NAME__;
+ pPctAcpiTables->PctName_a_P = PCT_NAME_P;
+ pPctAcpiTables->PctName_a_C = PCT_NAME_C;
+ pPctAcpiTables->PctName_a_T = PCT_NAME_T;
+ pPctAcpiTables->Value1 = PCT_VALUE1;
+ pPctAcpiTables->Value2 = PCT_VALUE2;
+ pPctAcpiTables->Value3 = PCT_VALUE3;
+ pPctAcpiTables->GenericRegDescription1 = GENERIC_REG_DESCRIPTION;
+ pPctAcpiTables->Length1 = PCT_LENGTH;
+ pPctAcpiTables->AddressSpaceId1 = PCT_ADDRESS_SPACE_ID;
+ pPctAcpiTables->RegisterBitWidth1 = PCT_REGISTER_BIT_WIDTH;
+ pPctAcpiTables->RegisterBitOffset1 = PCT_REGISTER_BIT_OFFSET;
+ pPctAcpiTables->Reserved1 = PCT_RESERVED;
+ pPctAcpiTables->ControlRegAddressLo = PCT_CONTROL_REG_LO;
+ pPctAcpiTables->ControlRegAddressHi = PCT_CONTROL_REG_HI;
+ pPctAcpiTables->Value4 = PCT_VALUE4;
+ pPctAcpiTables->Value5 = PCT_VALUE5;
+ pPctAcpiTables->GenericRegDescription2 = GENERIC_REG_DESCRIPTION;
+ pPctAcpiTables->Length2 = PCT_LENGTH;
+ pPctAcpiTables->AddressSpaceId2 = PCT_ADDRESS_SPACE_ID;
+ pPctAcpiTables->RegisterBitWidth2 = PCT_REGISTER_BIT_WIDTH;
+ pPctAcpiTables->RegisterBitOffset2 = PCT_REGISTER_BIT_OFFSET;
+ pPctAcpiTables->Reserved2 = PCT_RESERVED;
+ pPctAcpiTables->StatusRegAddressLo = PCT_STATUS_REG_LO;
+ pPctAcpiTables->StatusRegAddressHi = PCT_STATUS_REG_HI;
+ pPctAcpiTables->Value6 = PCT_VALUE6;
+
+ // Increment and then typecast the pointer
+ pPctAcpiTables++;
+ CurrSize += PCT_STRUCT_SIZE;
+
+ *SsdtPtr = pPctAcpiTables;
+ } // end of OptionPstateLateConfiguration.CfgPstatePct
+
+ pPssHeaderAcpiTables = (PSS_HEADER *) pPctAcpiTables;
+ pPssBodyAcpiTables = (PSS_BODY *) pPctAcpiTables;
+ if (OptionPstateLateConfiguration.CfgPstatePss) {
+ // Set _PSS Header
+ // Note: Set pssLength and numOfItemsInPss later
+ //---------------------------------------------------
+ pPssHeaderAcpiTables->NameOpcode = NAME_OPCODE;
+ pPssHeaderAcpiTables->PssName_a__ = PSS_NAME__;
+ pPssHeaderAcpiTables->PssName_a_P = PSS_NAME_P;
+ pPssHeaderAcpiTables->PssName_a_S = PSS_NAME_S;
+ pPssHeaderAcpiTables->PssName_b_S = PSS_NAME_S;
+ pPssHeaderAcpiTables->PkgOpcode = PACKAGE_OPCODE;
+
+ pPssHeaderAcpiTables++;
+ pPssBodyAcpiTables = (PSS_BODY *) pPssHeaderAcpiTables;
+ // Restore the pPssHeaderAcpiTables
+ pPssHeaderAcpiTables--;
+
+ // Set _PSS Body
+ //---------------
+ PstateCount = 0;
+
+ // Calculate PCI address for socket only
+ GetPciAddress (StdHeader, (UINT32) PStateLevelingBuffer->SocketNumber, 0, &PciAddress, &IgnoredStatus);
+ TransAndBusMastLatency = 0;
+ GetFeatureServicesOfSocket (&PstateFamilyServiceTable, (UINT32) PStateLevelingBuffer->SocketNumber, (CONST VOID **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+ FamilyServices->GetPstateLatency ( FamilyServices,
+ PStateLevelingBuffer,
+ &PciAddress,
+ &TransAndBusMastLatency,
+ StdHeader);
+
+ for (k = 0; k <= PStateMaxValueOnCurrentCore; k++) {
+ if (PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].PStateEnable != 0) {
+ pPssBodyAcpiTables->PkgOpcode = PACKAGE_OPCODE;
+ pPssBodyAcpiTables->PkgLength = PSS_PKG_LENGTH;
+ pPssBodyAcpiTables->NumOfElements = PSS_NUM_OF_ELEMENTS;
+ pPssBodyAcpiTables->DwordPrefixOpcode1 = DWORD_PREFIX_OPCODE;
+ pPssBodyAcpiTables->Frequency =
+ PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].CoreFreq;
+ pPssBodyAcpiTables->DwordPrefixOpcode2 = DWORD_PREFIX_OPCODE;
+ pPssBodyAcpiTables->Power =
+ PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].Power;
+
+ if (PstateCapEnable && (!PstateCapLevelSupportDetermined) && (PstateCapInputMilliWatts >= pPssBodyAcpiTables->Power)) {
+ PstateCapLevelSupport = (UINT8) PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].SwPstateNumber;
+ PstateCapLevelSupportDetermined = TRUE;
+ }
+
+ pPssBodyAcpiTables->DwordPrefixOpcode3 = DWORD_PREFIX_OPCODE;
+ pPssBodyAcpiTables->TransitionLatency = TransAndBusMastLatency;
+ pPssBodyAcpiTables->DwordPrefixOpcode4 = DWORD_PREFIX_OPCODE;
+ pPssBodyAcpiTables->BusMasterLatency = TransAndBusMastLatency;
+ pPssBodyAcpiTables->DwordPrefixOpcode5 = DWORD_PREFIX_OPCODE;
+ pPssBodyAcpiTables->Control =
+ PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].SwPstateNumber;
+ pPssBodyAcpiTables->DwordPrefixOpcode6 = DWORD_PREFIX_OPCODE;
+ pPssBodyAcpiTables->Status =
+ PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].SwPstateNumber;
+
+ pPssBodyAcpiTables++;
+ PstateCount++;
+ }
+ } // for (k = 0; k < MPPSTATE_MAXIMUM_STATES; k++)
+
+ if (PstateCapEnable && (!PstateCapLevelSupportDetermined)) {
+ PstateCapLevelSupport = PStateMaxValueOnCurrentCore;
+ }
+
+ // Set _PSS Header again
+ // Now Set pssLength and numOfItemsInPss
+ //---------------------------------------
+ TempVar_a = (PstateCount * PSS_BODY_STRUCT_SIZE) + 3;
+ TempVar_b = TempVar_a;
+ TempVar_c = ((TempVar_b << 4) & 0x0000FF00);
+ TempVar_c = TempVar_c | ((TempVar_b & 0x0000000F) | 0x00000040);
+ TempVar_a = (UINT16) TempVar_c;
+
+ pPssHeaderAcpiTables->PssLength = (UINT16) TempVar_a;
+ pPssHeaderAcpiTables->NumOfItemsInPss = (UINT8) PstateCount;
+ CurrSize += (PSS_HEADER_STRUCT_SIZE + (PstateCount * PSS_BODY_STRUCT_SIZE));
+
+ *SsdtPtr = pPssBodyAcpiTables;
+ } // end of PSS Body if OptionPstateLateConfiguration.CfgPstatePss
+
+ // Set XPSS Table
+ //---------------
+ // Typecast the pointer
+ pXpssHeaderAcpiTables = (XPSS_HEADER *) pPssBodyAcpiTables;
+ pXpssBodyAcpiTables = (XPSS_BODY *) pPssBodyAcpiTables;
+ if (OptionPstateLateConfiguration.CfgPstateXpss) {
+ // Set XPSS Header
+ // Note: Set the pssLength and numOfItemsInPss later
+ //---------------------------------------------------
+ pXpssHeaderAcpiTables->NameOpcode = NAME_OPCODE;
+ pXpssHeaderAcpiTables->XpssName_a_X = PSS_NAME_X;
+ pXpssHeaderAcpiTables->XpssName_a_P = PSS_NAME_P;
+ pXpssHeaderAcpiTables->XpssName_a_S = PSS_NAME_S;
+ pXpssHeaderAcpiTables->XpssName_b_S = PSS_NAME_S;
+ pXpssHeaderAcpiTables->PkgOpcode = PACKAGE_OPCODE;
+
+ // Increment and then typecast the pointer
+ pXpssHeaderAcpiTables++;
+ pXpssBodyAcpiTables = (XPSS_BODY *) pXpssHeaderAcpiTables;
+ // Restore the pXpssHeaderAcpiTables
+ pXpssHeaderAcpiTables--;
+
+ // Set XPSS Body
+ //---------------
+ for (k = 0; k <= PStateMaxValueOnCurrentCore; k++) {
+ if (PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].PStateEnable != 0) {
+ pXpssBodyAcpiTables->PkgOpcode = PACKAGE_OPCODE;
+ pXpssBodyAcpiTables->PkgLength = XPSS_PKG_LENGTH;
+ pXpssBodyAcpiTables->NumOfElements = XPSS_NUM_OF_ELEMENTS;
+ pXpssBodyAcpiTables->XpssValueTbd = 04;
+ pXpssBodyAcpiTables->DwordPrefixOpcode1 = DWORD_PREFIX_OPCODE;
+ pXpssBodyAcpiTables->Frequency =
+ PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].CoreFreq;
+ pXpssBodyAcpiTables->DwordPrefixOpcode2 = DWORD_PREFIX_OPCODE;
+ pXpssBodyAcpiTables->Power =
+ PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].Power;
+ pXpssBodyAcpiTables->DwordPrefixOpcode3 = DWORD_PREFIX_OPCODE;
+ pXpssBodyAcpiTables->TransitionLatency = TransAndBusMastLatency;
+ pXpssBodyAcpiTables->DwordPrefixOpcode4 = DWORD_PREFIX_OPCODE;
+ pXpssBodyAcpiTables->BusMasterLatency = TransAndBusMastLatency;
+ pXpssBodyAcpiTables->ControlBuffer = XPSS_ACPI_BUFFER;
+ pXpssBodyAcpiTables->ControlLo =
+ PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].SwPstateNumber;
+ pXpssBodyAcpiTables->ControlHi = 0;
+ pXpssBodyAcpiTables->StatusBuffer = XPSS_ACPI_BUFFER;
+ pXpssBodyAcpiTables->StatusLo =
+ PStateLevelingBuffer->PStateCoreStruct[0].PStateStruct[k].SwPstateNumber;
+ pXpssBodyAcpiTables->StatusHi = 0;
+ pXpssBodyAcpiTables->ControlMaskBuffer = XPSS_ACPI_BUFFER;
+ pXpssBodyAcpiTables->ControlMaskLo = 0;
+ pXpssBodyAcpiTables->ControlMaskHi = 0;
+ pXpssBodyAcpiTables->StatusMaskBuffer = XPSS_ACPI_BUFFER;
+ pXpssBodyAcpiTables->StatusMaskLo = 0;
+ pXpssBodyAcpiTables->StatusMaskHi = 0;
+
+ pXpssBodyAcpiTables++;
+ }
+ } // for (k = 0; k < MPPSTATE_MAXIMUM_STATES; k++)
+
+ // Set XPSS Header again
+ // Now set pssLength and numOfItemsInPss
+ //---------------------------------------
+ TempVar_a = (PstateCount * XPSS_BODY_STRUCT_SIZE) + 3;
+ TempVar_b = TempVar_a;
+ TempVar_c = ((TempVar_b << 4) & 0x0000FF00);
+ TempVar_c = TempVar_c | ((TempVar_b & 0x0000000F) | 0x00000040);
+ TempVar_a = (UINT16) TempVar_c;
+
+ pXpssHeaderAcpiTables->XpssLength = (UINT16) TempVar_a;
+ pXpssHeaderAcpiTables->NumOfItemsInXpss = (UINT8) PstateCount;
+ CurrSize += (XPSS_HEADER_STRUCT_SIZE + (PstateCount * XPSS_BODY_STRUCT_SIZE));
+
+ *SsdtPtr = pXpssBodyAcpiTables;
+ } //end of XPSS Body OptionPstateLateConfiguration.CfgPstateXpss
+
+ // Set _PSD Table
+ //---------------
+ // Typecast the pointer
+ pPsdHeaderAcpiTables = (PSD_HEADER *) pXpssBodyAcpiTables;
+ pPsdBodyAcpiTables = (PSD_BODY *) pXpssBodyAcpiTables;
+ // Get Total Cores Per Node
+ if (GetActiveCoresInGivenSocket ((UINT32) PStateLevelingBuffer->SocketNumber, &CoreCount1, StdHeader)) {
+ GetFeatureServicesOfSocket (&PstateFamilyServiceTable, (UINT32) PStateLevelingBuffer->SocketNumber, (CONST VOID **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+ if ((CoreCount1 != 1) && (OptionPstateLateConfiguration.CfgPstatePsd) &&
+ FamilyServices->IsPstatePsdNeeded (FamilyServices, PlatformConfig, StdHeader)) {
+ // Set _PSD Header
+ //----------------
+ pPsdHeaderAcpiTables->NameOpcode = NAME_OPCODE;
+ pPsdHeaderAcpiTables->PkgOpcode = PACKAGE_OPCODE;
+ pPsdHeaderAcpiTables->PsdLength = PSD_HEADER_LENGTH;
+ pPsdHeaderAcpiTables->Value1 = PSD_VALUE1;
+ pPsdHeaderAcpiTables->PsdName_a__ = PSD_NAME__;
+ pPsdHeaderAcpiTables->PsdName_a_P = PSD_NAME_P;
+ pPsdHeaderAcpiTables->PsdName_a_S = PSD_NAME_S;
+ pPsdHeaderAcpiTables->PsdName_a_D = PSD_NAME_D;
+
+ // Typecast the pointer
+ pPsdHeaderAcpiTables++;
+ CurrSize += PSD_HEADER_STRUCT_SIZE;
+ pPsdBodyAcpiTables = (PSD_BODY *) pPsdHeaderAcpiTables;
+
+ pPsdHeaderAcpiTables--;
+ // Set _PSD Body
+ //--------------
+ pPsdBodyAcpiTables->PkgOpcode = PACKAGE_OPCODE;
+ pPsdBodyAcpiTables->PkgLength = PSD_PKG_LENGTH;
+ pPsdBodyAcpiTables->NumOfEntries = NUM_OF_ENTRIES;
+ pPsdBodyAcpiTables->BytePrefixOpcode1 = BYTE_PREFIX_OPCODE;
+ pPsdBodyAcpiTables->PsdNumOfEntries = PSD_NUM_OF_ENTRIES;
+ pPsdBodyAcpiTables->BytePrefixOpcode2 = BYTE_PREFIX_OPCODE;
+ pPsdBodyAcpiTables->PsdRevision = PSD_REVISION;
+ pPsdBodyAcpiTables->DwordPrefixOpcode1 = DWORD_PREFIX_OPCODE;
+
+ if (EffectivePstatesPsdPolicy == PsdPolicyProcessorDefault) {
+ IsPsdDependent = FamilyServices->IsPstatePsdDependent (FamilyServices, PlatformConfig, StdHeader);
+ } else {
+ if (EffectivePstatesPsdPolicy == PsdPolicyDependent) {
+ IsPsdDependent = TRUE;
+ } else {
+ IsPsdDependent = FALSE;
+ }
+ IDS_HDT_CONSOLE (CPU_TRACE, " P-state PSD is forced by interface choice as dependent: %d\n", IsPsdDependent);
+ }
+
+ if (IsPsdDependent) {
+ pPsdBodyAcpiTables->DependencyDomain = PSD_DEPENDENCY_DOMAIN;
+ pPsdBodyAcpiTables->CoordinationType = PSD_COORDINATION_TYPE_SW_ALL;
+ pPsdBodyAcpiTables->NumOfProcessors = CoreCount1;
+ } else {
+ switch (GetComputeUnitMapping (StdHeader)) {
+ case AllCoresMapping:
+ // All cores are in their own compute unit.
+ pPsdBodyAcpiTables->DependencyDomain = LocalApicId;
+ pPsdBodyAcpiTables->CoordinationType = PSD_COORDINATION_TYPE_SW_ANY;
+ pPsdBodyAcpiTables->NumOfProcessors = PSD_NUM_OF_PROCESSORS;
+ break;
+ case EvenCoresMapping:
+ // Two cores per compute unit.
+ pPsdBodyAcpiTables->DependencyDomain = LocalApicId >> 1;
+ pPsdBodyAcpiTables->CoordinationType = PSD_COORDINATION_TYPE_HW_ALL;
+ pPsdBodyAcpiTables->NumOfProcessors = PSD_TWO_CORES_PER_COMPUTE_UNIT;
+ break;
+ case TripleCoresMapping:
+ // Three cores per compute unit.
+ pPsdBodyAcpiTables->DependencyDomain = LocalApicId / 3;
+ pPsdBodyAcpiTables->CoordinationType = PSD_COORDINATION_TYPE_HW_ALL;
+ pPsdBodyAcpiTables->NumOfProcessors = PSD_THREE_CORES_PER_COMPUTE_UNIT;
+ break;
+ case QuadCoresMapping:
+ // Four cores per compute unit.
+ pPsdBodyAcpiTables->DependencyDomain = LocalApicId >> 2;
+ pPsdBodyAcpiTables->CoordinationType = PSD_COORDINATION_TYPE_HW_ALL;
+ pPsdBodyAcpiTables->NumOfProcessors = PSD_FOUR_CORES_PER_COMPUTE_UNIT;
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ }
+ pPsdBodyAcpiTables->DwordPrefixOpcode2 = DWORD_PREFIX_OPCODE;
+ pPsdBodyAcpiTables->DwordPrefixOpcode3 = DWORD_PREFIX_OPCODE;
+
+ pPsdBodyAcpiTables++;
+ *SsdtPtr = pPsdBodyAcpiTables;
+ CurrSize += PSD_BODY_STRUCT_SIZE;
+ }
+ }// end of PSD Body if (CoreCount1 != 1) || (OptionPstateLateConfiguration.CfgPstatePsd)
+ // Typecast the pointer
+
+ pPpcAcpiTables = (PPC_HEADER_BODY *) pPsdBodyAcpiTables;
+
+ // Set _PPC Table
+ //---------------
+ if (OptionPstateLateConfiguration.CfgPstatePpc) {
+ // Name (PPCV, value)
+ pPpcAcpiTables->NameOpcode = NAME_OPCODE;
+ pPpcAcpiTables->PpcName_a_P = PPC_NAME_P;
+ pPpcAcpiTables->PpcName_b_P = PPC_NAME_P;
+ pPpcAcpiTables->PpcName_a_C = PPC_NAME_C;
+ pPpcAcpiTables->PpcName_a_V = PPC_NAME_V;
+ pPpcAcpiTables->Value1 = PPC_VALUE1;
+ pPpcAcpiTables->DefaultPerfPresentCap = PstateCapLevelSupport;
+ // Method (_PPC) { return (PPCV) }
+ pPpcAcpiTables->MethodOpcode = METHOD_OPCODE;
+ pPpcAcpiTables->PpcLength = PPC_METHOD_LENGTH;
+ pPpcAcpiTables->PpcName_a__ = PPC_NAME__;
+ pPpcAcpiTables->PpcName_c_P = PPC_NAME_P;
+ pPpcAcpiTables->PpcName_d_P = PPC_NAME_P;
+ pPpcAcpiTables->PpcName_b_C = PPC_NAME_C;
+ pPpcAcpiTables->MethodFlags = PPC_METHOD_FLAGS;
+ pPpcAcpiTables->ReturnOpcode = RETURN_OPCODE;
+ pPpcAcpiTables->PpcName_e_P = PPC_NAME_P;
+ pPpcAcpiTables->PpcName_f_P = PPC_NAME_P;
+ pPpcAcpiTables->PpcName_c_C = PPC_NAME_C;
+ pPpcAcpiTables->PpcName_b_V = PPC_NAME_V;
+
+ CurrSize += PPC_HEADER_BODY_STRUCT_SIZE;
+ // Increment and typecast the pointer
+ pPpcAcpiTables++;
+ *SsdtPtr = pPpcAcpiTables;
+ }// end of OptionPstateLateConfiguration.CfgPstatePpc
+ }
+ return CurrSize;
+}
+
+/**--------------------------------------------------------------------------------------
+ *
+ * CreateCStateAcpiTables
+ *
+ * Description:
+ * This is the common routine for creating ACPI C-State objects
+ *
+ * Parameters:
+ * @param[in] PlatformConfig Platform operational characteristics; power cap
+ * @param[in] PStateLevelingBuffer Buffer that contains P-State Leveling information
+ * @param[in,out] SsdtPtr ACPI SSDT table pointer
+ * @param[in] LocalApicId Local Apic Id
+ * @param[in] StdHeader Handle to config for library and services
+ *
+ * @retval Size of ACPI C-States objects generated
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+UINT32
+CreateCStateAcpiTables (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PSTATE_LEVELING *PStateLevelingBuffer,
+ IN OUT VOID **SsdtPtr,
+ IN UINT8 LocalApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 ObjSize;
+ IO_CSTATE_FAMILY_SERVICES *IoCstateFamilyServices;
+
+ ObjSize = 0;
+
+ if (IsFeatureEnabled (IoCstate, PlatformConfig, StdHeader)) {
+ GetFeatureServicesOfCurrentCore (&IoCstateFamilyServiceTable, (CONST VOID **)&IoCstateFamilyServices, StdHeader);
+ if (IoCstateFamilyServices != NULL) {
+ IoCstateFamilyServices->CreateAcpiCstObj (IoCstateFamilyServices, LocalApicId, SsdtPtr, StdHeader);
+ ObjSize = IoCstateFamilyServices->GetAcpiCstObj (IoCstateFamilyServices, PlatformConfig, StdHeader);
+ }
+ }
+ return ObjSize;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateTables.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateTables.h
new file mode 100644
index 0000000..9ccacb4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuPstateTables.h
@@ -0,0 +1,314 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU Pstate Table Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU _PSS related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_PSTATE_TABLES_H_
+#define _CPU_PSTATE_TABLES_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (PSTATE_CPU_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+/// P-state structure for each state
+typedef struct {
+ IN OUT UINT32 PStateEnable; ///< Pstate enable
+ IN OUT UINT32 CoreFreq; ///< MHz
+ IN OUT UINT32 Power; ///< milliWatts
+ IN OUT UINT32 IddValue; ///< Current value field
+ IN OUT UINT32 IddDiv; ///< Current divisor field
+ IN OUT UINT32 SwPstateNumber; ///< Software P-state number
+} S_PSTATE_VALUES;
+
+/// P-state structure for each core
+typedef struct {
+ IN OUT UINT8 PStateMaxValue; ///< Max p-state number in this core
+ IN OUT UINT8 HtcPstateLimit; ///< Htc limit
+ IN OUT UINT8 HtcCapable; ///< Htc capable
+ IN OUT UINT8 LocalApicId; ///< Local Apic Id
+ IN OUT UINT8 NumberOfBoostedStates; ///< Number of boost P-states
+ IN OUT S_PSTATE_VALUES PStateStruct[1]; ///< P state struc
+} S_PSTATE;
+
+/// P-state structure for each node
+typedef struct {
+ IN UINT8 SetPState0; ///< If value = 0x55 (Don't set PState0)
+ IN UINT8 TotalCoresInNode; ///< core number per node
+ IN UINT16 PStateLevelingSizeOfBytes; ///< Size
+ IN BOOLEAN OnlyOneEnabledPState; ///< Only P0
+ IN UINT8 InitStruct; ///< Init struc
+ IN BOOLEAN AllCpusHaveIdenticalPStates; ///< Have Identical p state
+ IN UINT8 CreateAcpiTables; ///< Create table flag
+ IN UINT8 SocketNumber; ///< Physical socket number of this socket
+ IN UINT8 Reserved[2]; ///< Reserved.
+ IN OUT S_PSTATE PStateCoreStruct[1]; ///< P state core struc
+} PSTATE_LEVELING;
+
+/// P-state structure for whole system
+typedef struct {
+ IN OUT UINT32 TotalSocketInSystem; ///< Total node number in system
+ IN OUT UINT32 SizeOfBytes; ///< Structure size
+ IN OUT PSTATE_LEVELING PStateLevelingStruc[1]; ///< P state level structure
+} S_CPU_AMD_PSTATE;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if PSD need to be generated.
+ *
+ * @param[in] PstateCpuFamilyServices Pstate CPU services.
+ * @param[in,out] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE PSD need to be generated
+ * @retval FALSE PSD does NOT need to be generated
+ *
+ */
+typedef BOOLEAN F_PSTATE_PSD_IS_NEEDED (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_PSTATE_PSD_IS_NEEDED *PF_PSTATE_PSD_IS_NEEDED;
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if Pstate PSD is dependent.
+ *
+ * @param[in] PstateCpuFamilyServices Pstate CPU services.
+ * @param[in,out] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE PSD is dependent.
+ * @retval FALSE PSD is independent.
+ *
+ */
+typedef BOOLEAN F_PSTATE_PSD_IS_DEPENDENT (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_PSTATE_PSD_IS_DEPENDENT *PF_PSTATE_PSD_IS_DEPENDENT;
+
+/**
+ * Family specific call to get CPU pstate transition latency for current socket.
+ *
+ * @param[in] PstateCpuFamilyServices Pstate CPU services.
+ * @param[in] PStateLevelingBufferStructPtr Pstate row data buffer pointer.
+ * @param[in] PciAddress Pci address struct.
+ * @param[out] TransitionLatency Pstate Transition latency result.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_PSTATE_TRANSITION_LATENCY (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN PSTATE_LEVELING *PStateLevelingBufferStructPtr,
+ IN PCI_ADDR *PciAddress,
+ OUT UINT32 *TransitionLatency,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_PSTATE_TRANSITION_LATENCY *PF_CPU_PSTATE_TRANSITION_LATENCY;
+
+/**
+ * Family specific call to get the desired P-state's frequency in megahertz.
+ *
+ * @param[in] PstateCpuFamilyServices Pstate CPU services.
+ * @param[in] StateNumber P-state number.
+ * @param[out] PowerInMw P-state frequency in megahertz.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_GET_PSTATE_FREQ (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN UINT8 StateNumber,
+ OUT UINT32 *FreqInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_GET_PSTATE_FREQ *PF_CPU_GET_PSTATE_FREQ;
+
+/**
+ * Family specific call to set the system wide P-state settings on the current core.
+ *
+ * @param[in] PstateCpuFamilyServices Pstate CPU services.
+ * @param[in] CpuAmdPState The current core's P-state data.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_SET_PSTATE_LEVELING_REG (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN S_CPU_AMD_PSTATE *CpuAmdPState,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_SET_PSTATE_LEVELING_REG *PF_CPU_SET_PSTATE_LEVELING_REG;
+
+/**
+ * Family specific call to get the desired P-state's rated power in milliwatts.
+ *
+ * @param[in] PstateCpuFamilyServices Pstate CPU services.
+ * @param[in] StateNumber P-state number.
+ * @param[out] PowerInMw P-state power in milliwatts.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_GET_PSTATE_POWER (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN UINT8 StateNumber,
+ OUT UINT32 *PowerInMw,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_GET_PSTATE_POWER *PF_CPU_GET_PSTATE_POWER;
+
+/**
+ * Family specific call to get CPU Pstate Max State.
+ *
+ * @param[in] PstateCpuFamilyServices Pstate CPU services.
+ * @param[out] MaxPStateNumber The max hw pstate value on the current socket.
+ * @param[out] NumberOfBoostStates The number of boosted P-states on the current socket.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_GET_PSTATE_MAX_STATE (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ OUT UINT32 *MaxPStateNumber,
+ OUT UINT8 *NumberOfBoostStates,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_GET_PSTATE_MAX_STATE *PF_CPU_GET_PSTATE_MAX_STATE;
+
+/**
+ * Family specific call to get CPU pstate register information.
+ *
+ * @param[in] PstateCpuFamilyServices Pstate CPU services.
+ * @param[in] PState Input hardware Pstate number for query.
+ * @param[out] PStateEnabled Boolean flag return pstate enable.
+ * @param[in,out] IddVal Pstate current value.
+ * @param[in,out] IddDiv Pstate current divisor.
+ * @param[out] SwPstateNumber Software P-state number.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_GET_PSTATE_REGISTER_INFO (
+ IN PSTATE_CPU_FAMILY_SERVICES *PstateCpuServices,
+ IN UINT32 PState,
+ OUT BOOLEAN *PStateEnabled,
+ IN OUT UINT32 *IddVal,
+ IN OUT UINT32 *IddDiv,
+ OUT UINT32 *SwPstateNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_GET_PSTATE_REGISTER_INFO *PF_CPU_GET_PSTATE_REGISTER_INFO;
+
+/**
+ * Provide the interface to the Pstate dependent Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _PSTATE_CPU_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_PSTATE_PSD_IS_NEEDED IsPstatePsdNeeded; ///< Method: Family specific call to check if PSD need to be generated.
+ PF_PSTATE_PSD_IS_DEPENDENT IsPstatePsdDependent; ///< Method: Family specific call to check if PSD is dependent.
+ PF_CPU_PSTATE_TRANSITION_LATENCY GetPstateLatency; ///< Method: Family specific call to get pstate transition latency.
+ PF_CPU_GET_PSTATE_FREQ GetPstateFrequency; ///< Method: Family specific call to get the desired P-state's frequency in megahertz.
+ PF_CPU_SET_PSTATE_LEVELING_REG SetPStateLevelReg; ///< Method: Family specific call to set the system wide P-state settings on the current core.
+ PF_CPU_GET_PSTATE_POWER GetPstatePower; ///< Method: Family specific call to get the desired P-state's rated power in milliwatts.
+ PF_CPU_GET_PSTATE_MAX_STATE GetPstateMaxState; ///< Method: Family specific call to get pstate max state number.
+ PF_CPU_GET_PSTATE_REGISTER_INFO GetPstateRegisterInfo; ///< Method: Family specific call to get pstate register information.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N S P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+PStateGatherData (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+PStateLeveling (
+ IN OUT S_CPU_AMD_PSTATE *PStateStrucPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+CpuGetPStateLevelStructure (
+ OUT PSTATE_LEVELING **PStateBufferPtr,
+ IN S_CPU_AMD_PSTATE *CpuAmdPState,
+ IN UINT32 LogicalSocketNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _CPU_PSTATE_TABLES_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuSlit.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuSlit.c
new file mode 100644
index 0000000..cbabf67
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuSlit.c
@@ -0,0 +1,398 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD SLIT, ACPI table related API functions.
+ *
+ * Contains code that generates the SLIT table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------
+ * This file provides functions, that will generate SLIT tables
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionSlit.h"
+#include "heapManager.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "Ids.h"
+#include "cpuFeatures.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuL3Features.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FEATURE_CPUSLIT_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern OPTION_SLIT_CONFIGURATION OptionSlitConfiguration; // global user config record
+
+STATIC ACPI_TABLE_HEADER ROMDATA CpuSlitHdrStruct =
+{
+ {'S','L','I','T'},
+ 0,
+ 1,
+ 0,
+ {0},
+ {0},
+ 1,
+ {'A','M','D',' '},
+ 1
+};
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+AcpiSlitHBufferFind (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT8 **SocketTopologyPtr
+ );
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GetAcpiSlitStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT VOID **SlitPtr
+ );
+
+AGESA_STATUS
+GetAcpiSlitMain (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT VOID **SlitPtr
+ );
+
+AGESA_STATUS
+ReleaseSlitBufferStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+ReleaseSlitBuffer (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern CPU_FAMILY_SUPPORT_TABLE L3FeatureFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function generates a complete SLIT table into a memory buffer.
+ * After completion, this table must be set by the system BIOS into its
+ * internal ACPI namespace, and linked into the RSDT/XSDT
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in, out] SlitPtr Point to Slit Struct including buffer address and length
+ *
+ * @retval UINT32 AGESA_STATUS
+ */
+AGESA_STATUS
+CreateAcpiSlit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT VOID **SlitPtr
+ )
+{
+ AGESA_TESTPOINT (TpProcCpuEntrySlit, StdHeader);
+ return ((*(OptionSlitConfiguration.SlitFeature)) (StdHeader, PlatformConfig, SlitPtr));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This is the default routine for use when the SLIT option is NOT requested.
+ *
+ * The option install process will create and fill the transfer vector with
+ * the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in, out] SlitPtr Point to Slit Struct including buffer address and length
+ *
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GetAcpiSlitStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT VOID **SlitPtr
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function generates a complete SLIT table into a memory buffer.
+ * After completion, this table must be set by the system BIOS into its
+ * internal ACPI namespace, and linked into the RSDT/XSDT
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in, out] SlitPtr Point to Slit Struct including buffer address and length
+ *
+ * @retval UINT32 AGESA_STATUS
+ */
+AGESA_STATUS
+GetAcpiSlitMain (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT VOID **SlitPtr
+ )
+{
+ UINT8 MaxHops;
+ UINT8 SocketNum;
+ UINT8 i;
+ UINT8 j;
+ UINT8 *BufferPtr;
+ UINT8 *SocketTopologyDataPtr;
+ UINT8 *SocketTopologyPtr;
+ UINT32 Socket;
+ BOOLEAN var8;
+ ACPI_TABLE_HEADER *CpuSlitHeaderStructPtr;
+ AGESA_STATUS Flag;
+ ALLOCATE_HEAP_PARAMS AllocStruct;
+ L3_FEATURE_FAMILY_SERVICES *FamilyServices;
+
+ MaxHops = 0;
+ SocketTopologyPtr = NULL;
+ Flag = AGESA_ERROR;
+ var8 = FALSE;
+
+ // find out the pointer to the BufferHandle which contains
+ // Node Topology information
+ AcpiSlitHBufferFind (StdHeader, &SocketTopologyPtr);
+ if (SocketTopologyPtr == NULL) {
+ return (Flag);
+ }
+
+ SocketNum = *SocketTopologyPtr;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " SLIT is created\n");
+
+ // create a buffer by calling IBV callout routine
+ AllocStruct.RequestedBufferSize = (SocketNum * SocketNum) + AMD_ACPI_SLIT_SOCKET_NUM_LENGTH + sizeof (ACPI_TABLE_HEADER);
+ AllocStruct.BufferHandle = AMD_ACPI_SLIT_BUFFER_HANDLE;
+ AllocStruct.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocStruct, StdHeader) != AGESA_SUCCESS) {
+ return (Flag);
+ }
+ *SlitPtr = AllocStruct.BufferPtr;
+
+ //SLIT header
+ LibAmdMemCopy (*SlitPtr, (VOID *) &CpuSlitHdrStruct, (UINTN) (sizeof (ACPI_TABLE_HEADER)), StdHeader);
+ CpuSlitHeaderStructPtr = (ACPI_TABLE_HEADER *) *SlitPtr;
+ CpuSlitHeaderStructPtr->TableLength = (UINT32) AllocStruct.RequestedBufferSize;
+ // Update table OEM fields.
+ LibAmdMemCopy ((VOID *) &CpuSlitHeaderStructPtr->OemId, (VOID *) &OptionSlitConfiguration.OemIdString,
+ sizeof (OptionSlitConfiguration.OemIdString), StdHeader);
+ LibAmdMemCopy ((VOID *) &CpuSlitHeaderStructPtr->OemTableId, (VOID *) &OptionSlitConfiguration.OemTableIdString,
+ sizeof (OptionSlitConfiguration.OemTableIdString), StdHeader);
+ BufferPtr = *SlitPtr;
+
+ Flag = AGESA_SUCCESS;
+ // SLIT body
+ if (IsFeatureEnabled (L3Features, PlatformConfig, StdHeader)) {
+ var8 = TRUE;
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ GetFeatureServicesOfSocket (&L3FeatureFamilyServiceTable, Socket, (CONST VOID **)&FamilyServices, StdHeader);
+ if ((FamilyServices == NULL) || (!FamilyServices->IsHtAssistSupported (FamilyServices, PlatformConfig, StdHeader))) {
+ var8 = FALSE;
+ break;
+ }
+ }
+ }
+ }
+
+
+ if (!var8) {
+ // get MaxHops
+ SocketTopologyDataPtr = SocketTopologyPtr + sizeof (SocketNum);
+ for (i = 0; i < SocketNum; i++) {
+ for (j = 0; j < SocketNum; j++) {
+ if (*SocketTopologyDataPtr > MaxHops) {
+ MaxHops = *SocketTopologyDataPtr;
+ }
+ SocketTopologyDataPtr++;
+ }
+ }
+
+ // the Max hop entries have a value of 13
+ // and all other entries have 10.
+ SocketTopologyDataPtr = SocketTopologyPtr + sizeof (SocketNum);
+ for (i = 0; i < SocketNum; i++) {
+ for (j = 0; j < SocketNum; j++) {
+ if (*SocketTopologyDataPtr++ == MaxHops) {
+ *(BufferPtr + sizeof (ACPI_TABLE_HEADER) +
+ AMD_ACPI_SLIT_SOCKET_NUM_LENGTH + (i * SocketNum) + j) = 13;
+ } else {
+ *(BufferPtr + sizeof (ACPI_TABLE_HEADER) +
+ AMD_ACPI_SLIT_SOCKET_NUM_LENGTH + (i * SocketNum) + j) = 10;
+ }
+ }
+ }
+ } else {
+ // formula : num_hops * 6 + 10
+ SocketTopologyDataPtr = SocketTopologyPtr + sizeof (SocketNum);
+ for (i = 0; i < SocketNum; i++) {
+ for (j = 0; j < SocketNum; j++) {
+ *(BufferPtr + sizeof (ACPI_TABLE_HEADER) +
+ AMD_ACPI_SLIT_SOCKET_NUM_LENGTH + (i * SocketNum) + j) =
+ ((*SocketTopologyDataPtr++) * 6) + 10;
+ }
+ }
+ }
+
+ BufferPtr += sizeof (ACPI_TABLE_HEADER);
+ *((UINT64 *) BufferPtr) = (UINT64) SocketNum;
+
+ //Update SLIT header Checksum
+ ChecksumAcpiTable ((ACPI_TABLE_HEADER *) *SlitPtr, StdHeader);
+
+ return (Flag);
+}
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Find out the pointer to the BufferHandle which contains
+ * Node Topology information
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in] SocketTopologyPtr Point to the address of Socket Topology
+ *
+ */
+VOID
+STATIC
+AcpiSlitHBufferFind (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT8 **SocketTopologyPtr
+ )
+{
+ LOCATE_HEAP_PTR LocateBuffer;
+
+ LocateBuffer.BufferHandle = HOP_COUNT_TABLE_HANDLE;
+ if (HeapLocateBuffer (&LocateBuffer, StdHeader) == AGESA_SUCCESS) {
+ *SocketTopologyPtr = (UINT8 *) LocateBuffer.BufferPtr;
+ }
+
+ return;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * ReleaseSlitBufferStub
+ *
+ * Description:
+ * This is the default routine for use when the SLIT option is NOT requested.
+ *
+ * Parameters:
+ * @param[in, out] *StdHeader
+ *
+ * @retval AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+ReleaseSlitBufferStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * ReleaseSlitBuffer
+ *
+ * Description:
+ * Deallocate SLIT buffer
+ *
+ * Parameters:
+ * @param[in, out] *StdHeader
+ *
+ * @retval AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+ReleaseSlitBuffer (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ HeapDeallocateBuffer ((UINT32) HOP_COUNT_TABLE_HANDLE, StdHeader);
+
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuSrat.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuSrat.c
new file mode 100644
index 0000000..9d6ca3d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuSrat.c
@@ -0,0 +1,618 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD SRAT, ACPI table related API functions.
+ *
+ * Contains code that Create the APCI SRAT Table after early reset.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ***************************************************************************/
+
+
+/*----------------------------------------------------------------------------
+ * This file provides functions, that will generate SRAT tables
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuServices.h"
+#include "OptionSrat.h"
+#include "heapManager.h"
+#include "cpuRegisters.h"
+#include "cpuLateInit.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FEATURE_CPUSRAT_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_SRAT_CONFIGURATION OptionSratConfiguration; // global user config record
+
+#define NodeID 0x60
+#define FOURGB 0x010000ul
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GetAcpiSratStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **SratPtr
+ );
+
+AGESA_STATUS
+GetAcpiSratMain (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **SratPtr
+ );
+
+/*----------------------------------------------------------------------------
+ * All of the DATA should be defined in _CODE segment.
+ * Use ROMDATA to specify that it belongs to _CODE.
+ *----------------------------------------------------------------------------
+ */
+STATIC CPU_SRAT_HEADER ROMDATA CpuSratHdrStruct =
+{
+ {'S','R','A','T'},
+ 0,
+ 2,
+ 0,
+ {0},
+ {0},
+ 1,
+ {'A','M','D',' '},
+ 1,
+ 1,
+ {0, 0, 0, 0, 0, 0, 0, 0}
+};
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT8
+STATIC
+*MakeApicEntry (
+ IN UINT8 ApicId,
+ IN UINT8 Domain,
+ IN UINT8 *BufferLocPtr
+ );
+
+UINT8
+STATIC
+*FillMemoryForCurrentNode (
+ IN UINT8 *PDomain,
+ IN OUT UINT8 *PDomainForBase640K,
+ IN UINT8 Node,
+ IN OUT UINT8 *BufferLocPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+STATIC
+*MakeMemEntry (
+ IN UINT8 PDomain,
+ IN UINT8 Node,
+ IN UINT32 Base,
+ IN UINT32 Size,
+ IN UINT8 *BufferLocPtr
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function will generate a complete Static Resource Affinity Table
+ * i.e. SRAT into a memory buffer. After completion, this table must be set
+ * by the system BIOS into its internal ACPI name space.
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in, out] SratPtr Point to Srat Struct including buffer address and length
+ *
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+CreateAcpiSrat (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **SratPtr
+ )
+{
+ AGESA_TESTPOINT (TpProcCpuEntrySrat, StdHeader);
+ return ((*(OptionSratConfiguration.SratFeature)) (StdHeader, SratPtr));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This is the default routine for use when the SRAT option is NOT requested.
+ *
+ * The option install process will create and fill the transfer vector with
+ * the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in, out] SratPtr Point to Srat Struct including buffer address and length
+ *
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GetAcpiSratStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **SratPtr
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function will generate a complete Static Resource Affinity Table
+ * i.e. SRAT into a memory buffer. After completion, this table must be set
+ * by the system BIOS into its internal ACPI name space.
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in, out] SratPtr Point to Srat Struct including buffer address and length
+ *
+ * @retval AGESA_STATUS
+ */
+AGESA_STATUS
+GetAcpiSratMain (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **SratPtr
+ )
+{
+ UINT8 *BufferPtr;
+ UINT8 NodeNum;
+ UINT8 NodeCount;
+ UINT8 PDomain;
+ UINT8 PDomainForBase640K;
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 LowCore;
+ UINT32 HighCore;
+ UINT32 CoreNum;
+ UINT32 tempVar_32;
+ AMD_APIC_PARAMS ApicParams;
+ CPU_SRAT_HEADER *CpuSratHeaderStructPtr;
+ ALLOCATE_HEAP_PARAMS AllocParams;
+
+ // Get Node count
+ NodeCount = 1;
+ NodeCount = 1;
+
+ // The worst-case buffer size to request is for the SRAT table header, one
+ // entree for special region (base 640k block), two memory
+ // regions per node, and APIC entries for each core in the system.
+ tempVar_32 = (sizeof (CPU_SRAT_HEADER)) + (sizeof (CPU_SRAT_MEMORY_ENTRY))
+ + ((UINT32) NodeCount * (2 * (sizeof (CPU_SRAT_MEMORY_ENTRY))
+ + ((UINT32) GetActiveCoresInCurrentModule (StdHeader) * sizeof (CPU_SRAT_APIC_ENTRY))));
+
+ if (*SratPtr == NULL) {
+ //
+ // Allocate a buffer
+ //
+ AllocParams.RequestedBufferSize = tempVar_32;
+ AllocParams.BufferHandle = AMD_SRAT_INFO_BUFFER_HANDLE;
+ AllocParams.Persist = HEAP_SYSTEM_MEM;
+
+ AGESA_TESTPOINT (TpProcCpuBeforeAllocateSratBuffer, StdHeader);
+ if (HeapAllocateBuffer (&AllocParams, StdHeader) != AGESA_SUCCESS) {
+ return AGESA_ERROR;
+ }
+ AGESA_TESTPOINT (TpProcCpuAfterAllocateSratBuffer, StdHeader);
+
+ *SratPtr = AllocParams.BufferPtr;
+ }
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " SRAT is created\n");
+
+ CpuSratHeaderStructPtr = (CPU_SRAT_HEADER *) *SratPtr;
+ BufferPtr = (UINT8 *) *SratPtr;
+
+ // Copy acpiSRATHeader -> data buffer
+ LibAmdMemCopy (*SratPtr, (VOID *) &CpuSratHdrStruct, (UINTN) (sizeof (CPU_SRAT_HEADER)), StdHeader);
+ // Update table OEM fields.
+ LibAmdMemCopy ((VOID *) &CpuSratHeaderStructPtr->OemId, (VOID *) &OptionSratConfiguration.OemIdString,
+ sizeof (OptionSratConfiguration.OemIdString), StdHeader);
+ LibAmdMemCopy ((VOID *) &CpuSratHeaderStructPtr->OemTableId, (VOID *) &OptionSratConfiguration.OemTableIdString,
+ sizeof (OptionSratConfiguration.OemTableIdString), StdHeader);
+
+ BufferPtr += sizeof (CPU_SRAT_HEADER);
+
+ // Place all memory and IO affinity entries
+ NodeNum = 0;
+ PDomain = 0;
+ PDomainForBase640K = 0xFF;
+ ApicParams.StdHeader = *StdHeader;
+ while (NodeNum < NodeCount) {
+ GetSocketModuleOfNode ((UINT32) NodeNum, &Socket, &Module, StdHeader);
+ GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader);
+ BufferPtr = FillMemoryForCurrentNode (&PDomain, &PDomainForBase640K, NodeNum, BufferPtr, StdHeader);
+ for (CoreNum = LowCore; CoreNum <= HighCore; CoreNum++) {
+ ApicParams.Socket = (UINT8) Socket;
+ ApicParams.Core = (UINT8) CoreNum;
+ AmdGetApicId (&ApicParams);
+ if (ApicParams.IsPresent) {
+ BufferPtr = MakeApicEntry (ApicParams.ApicAddress, PDomain, BufferPtr);
+ }
+ }
+
+ NodeNum++;
+ PDomain = NodeNum;
+ }
+
+ // Store size in table (current buffer offset - buffer start offset)
+ CpuSratHeaderStructPtr->TableLength = (UINT32) (BufferPtr - (UINT8 *) CpuSratHeaderStructPtr);
+
+ //Update SSDT header Checksum
+ ChecksumAcpiTable ((ACPI_TABLE_HEADER *) CpuSratHeaderStructPtr, StdHeader);
+
+ return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function will build Memory entry for current node.
+ * Note that we only create a memory affinity entry if we find one
+ * that matches the current node. This makes an easier to read table
+ * though it is not necessary.
+ *
+ * @param[in] PDomain Proximity Domain
+ * @param[in, out] PDomainForBase640K The PDomain for Base 640K
+ * @param[in] Node The number of Node
+ * @param[in, out] BufferLocPtr Point to the address of buffer
+ * @param[in, out] StdHeader Standard Head Pointer
+ *
+ * @retval UINT8 *(New buffer location ptr)
+ */
+UINT8
+STATIC
+*FillMemoryForCurrentNode (
+ IN UINT8 *PDomain,
+ IN OUT UINT8 *PDomainForBase640K,
+ IN UINT8 Node,
+ IN OUT UINT8 *BufferLocPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 ValueLimit;
+ UINT32 ValueTOM;
+ BOOLEAN isModified;
+ UINT8 Domain;
+ UINT32 RegVal;
+ UINT32 DramLeng;
+ UINT32 DramBase;
+ UINT32 DramLimit;
+ UINT32 OffsetRegs;
+ PCI_ADDR PciAddress;
+ UINT64 MsrValue;
+ UINT32 TopOfMemoryAbove4Gb;
+
+ Domain = *PDomain;
+
+ PciAddress.Address.Segment = 0;
+ PciAddress.Address.Bus = 0;
+ PciAddress.Address.Device = LOW_NODE_DEVICEID;
+ PciAddress.Address.Function = FUNC_1;
+
+ for (OffsetRegs = DRAMBase0; OffsetRegs < MMIOBase0; OffsetRegs += 8) {
+ isModified = FALSE; // FALSE means normal update procedure
+ // Get DRAM Base Address
+ PciAddress.Address.Register = OffsetRegs;
+ LibAmdPciRead (AccessWidth32, PciAddress, &DramBase, StdHeader);
+ if ((DramBase & 3) != 3) {
+ // 0:1 set if memory range enabled
+ // Not set, so we don't have an enabled range
+ continue; // Proceed to next Base register
+ }
+
+ // Get DRAM Limit
+ PciAddress.Address.Register = OffsetRegs + 4;
+ LibAmdPciRead (AccessWidth32, PciAddress, &DramLimit, StdHeader);
+ if (DramLimit == 0xFFFFFFFF) {
+ // Node not installed(all FF's)?
+ continue; // Proceed to next Base register
+ }
+
+ if ((DramLimit & 0xFF) != Node) {
+ // Check if Destination Node ID is current node
+ continue; // Proceed to next Base register
+ }
+
+ // We only add an entry now if detected range belongs to current node/PDomain
+ PciAddress.Address.Register = OffsetRegs + 0x104;
+ LibAmdPciRead (AccessWidth32, PciAddress, &RegVal, StdHeader);
+
+ DramLimit = (((RegVal & 0xFF) << 16) | (DramLimit >> 16)); // Get DRAM Limit addr [47:24]
+ DramLimit++; // Add 1 for potential length
+ DramLimit <<= 8;
+
+ // Get DRAM Base Address
+ PciAddress.Address.Register = OffsetRegs + 0x100;
+ LibAmdPciRead (AccessWidth32, PciAddress, &RegVal, StdHeader);
+ DramBase = ((((RegVal & 0xFF) << 24) | (DramBase >> 8)) & 0xFFFFFF00); // Get DRAM Base Base value [47:24]
+ DramLeng = DramLimit - DramBase; // Subtract base from limit to get length
+
+ // Leave hole for conventional memory (Less than 640K). It must be on CPU 0.
+ if (DramBase == 0) {
+ if (*PDomainForBase640K == 0xFF) {
+ // It is the first time that the range start at 0.
+ // If Yes, then Place 1MB memory gap and save Domain to PDomainForBase640K
+ BufferLocPtr = MakeMemEntry (
+ Domain,
+ Node,
+ 0, // Base = 0
+ 0xA0000 >> 16, // Put it into format used in DRAM regs..
+ BufferLocPtr
+ );
+ DramBase += 0x10; // Add 1MB, so range = 1MB to Top of Region
+ DramLeng -= 0x10; // Also subtract 1MB from the length
+ *PDomainForBase640K = Domain; // Save Domain number for memory Less than 640K
+ } else {
+ // If No, there are more than one memory range less than 640K, it should that
+ // node interleaving is enabled. All nodes have the same memory ranges
+ // and all cores in these nodes belong to the same domain.
+ *PDomain = *PDomainForBase640K;
+ return (BufferLocPtr);
+ }
+ }
+ LibAmdMsrRead (TOP_MEM, &MsrValue, StdHeader);
+ ValueTOM = (UINT32) MsrValue >> 16; // Save it in 39:24 format
+ ValueLimit = DramBase + DramLeng; // We need to know how large region is
+
+ LibAmdMsrRead (SYS_CFG, &MsrValue, StdHeader);
+ if ((MsrValue & BIT21) != 0) {
+ LibAmdMsrRead (TOP_MEM2, &MsrValue, StdHeader);
+ TopOfMemoryAbove4Gb = (UINT32) (MsrValue >> 16); // Save it in 47:16 format
+ } else {
+ TopOfMemoryAbove4Gb = 0xFFFFFFFF;
+ }
+
+ // SPECIAL CASES:
+ //
+ // Several conditions require that we process the values of the memory range differently.
+ // Here are descriptions of the corner cases.
+ //
+ // 1. TRUNCATE LOW - Memory range starts below TOM, ends in TOM (memory hole). For this case,
+ // the range must be truncated to end at TOM.
+ // ******************************* *******************************
+ // * * * -> * *
+ // ******************************* *******************************
+ // 2 TOM 4 2 TOM
+ //
+ // 2. TRUNCATE HIGH - Memory range starts below 4GB, ends above 4GB. This is handled by changing the
+ // start base to 4GB.
+ // **************** **********
+ // * * * -> * *
+ // **************** **********
+ // TOM 3.8 4 6 TOM 3.8 4 6
+ //
+ // 3. Memory range starts below TOM, ends above 4GB. For this case, the range must be truncated
+ // to end at TOM. Note that this scenario creates two ranges, as the second comparison below
+ // will find that it ends above 4GB since base and limit have been restored after first truncation,
+ // and a second range will be written based at 4GB ending at original end address.
+ // ******************************* **************** **********
+ // * * * * -> * * * *
+ // ******************************* **************** **********
+ // 2 TOM 4 6 2 TOM 4 6
+ //
+ // 4. Memory range starts above TOM, ends below or equal to 4GB. This invalid range should simply
+ // be ignored.
+ // *******
+ // * * -> < NULL >
+ // *******
+ // TOM 3.8 4
+ //
+ // 5. Memory range starts below TOM2, and ends beyond TOM2. This range must be truncated to TOM2.
+ // ************************ *******************************
+ // * * * -> * *
+ // ************************ *******************************
+ // 768 TOM2 1024 768 TOM2
+ //
+ // 6. Memory range starts above TOM2. This invalid range should simply be ignored.
+ // ********************
+ // * * -> < NULL >
+ // ********************
+ // TOM2 1024 1280
+
+ if (((DramBase < ValueTOM) && (ValueLimit <= FOURGB) && (ValueLimit > ValueTOM))
+ || ((DramBase < ValueTOM) && (ValueLimit > FOURGB))) {
+ // TRUNCATE LOW!!! Shrink entry below TOM...
+ // Base = DramBase, Size = TOM - DramBase
+ BufferLocPtr = MakeMemEntry (Domain, Node, DramBase, (ValueTOM - DramBase), BufferLocPtr);
+ isModified = TRUE;
+ }
+
+ if ((ValueLimit > FOURGB) && (DramBase < FOURGB)) {
+ // TRUNCATE HIGH!!! Shrink entry above 4GB...
+ // Size = Base + Size - 4GB, Base = 4GB
+ BufferLocPtr = MakeMemEntry (Domain, Node, FOURGB, (DramLeng + DramBase - FOURGB), BufferLocPtr);
+ isModified = TRUE;
+ }
+
+ if ((DramBase >= ValueTOM) && (ValueLimit <= FOURGB)) {
+ // IGNORE!!! Entry located entirely within memory hole
+ isModified = TRUE;
+ }
+
+ if ((DramBase < TopOfMemoryAbove4Gb) && (ValueLimit > TopOfMemoryAbove4Gb)) {
+ // Truncate to TOM2
+ // Base = DramBase, Size = TOM2 - DramBase
+ BufferLocPtr = MakeMemEntry (Domain, Node, DramBase, (TopOfMemoryAbove4Gb - DramBase), BufferLocPtr);
+ isModified = TRUE;
+ }
+
+ if (DramBase >= TopOfMemoryAbove4Gb) {
+ // IGNORE!!! Entry located entirely above TOM2
+ isModified = TRUE;
+ }
+
+ // If special range(isModified), we are done.
+ // If not, finally write the memory entry.
+ if (isModified == FALSE) {
+ // Finally write the memory entry.
+ BufferLocPtr = MakeMemEntry (Domain, Node, DramBase, DramLeng, BufferLocPtr);
+ }
+
+ } // for ( OffsetRegs = DRAMBase0; ... )
+
+ return (BufferLocPtr);
+} // FillMemoryForCurrentNode()
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will add APIC entry.
+ *
+ * @param[in] ApicId APIC ID number
+ * @param[in] Domain Domain number
+ * @param[in] BufferLocPtr Point to the address of buffer
+ *
+ * @retval UINT8 *(New buffer location ptr)
+ */
+UINT8
+STATIC
+*MakeApicEntry (
+ IN UINT8 ApicId,
+ IN UINT8 Domain,
+ IN UINT8 *BufferLocPtr
+ )
+{
+ CPU_SRAT_APIC_ENTRY *psSratApicEntry;
+ UINT8 ReservedBytes;
+
+ psSratApicEntry = (CPU_SRAT_APIC_ENTRY *)BufferLocPtr;
+
+ psSratApicEntry->Type = AE_APIC;
+ psSratApicEntry->Length = (UINT8)sizeof (CPU_SRAT_APIC_ENTRY);
+ psSratApicEntry->Domain = Domain;
+ psSratApicEntry->ApicId = ApicId;
+ psSratApicEntry->Flags = ENABLED;
+ psSratApicEntry->LSApicEid = 0;
+ for (ReservedBytes = 0; ReservedBytes < (UINT8)sizeof (psSratApicEntry->Reserved); ReservedBytes++) {
+ psSratApicEntry->Reserved[ReservedBytes] = 0;
+ }
+ return (BufferLocPtr + (UINT8)sizeof (CPU_SRAT_APIC_ENTRY));
+} // MakeApicEntry
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function will add Memory entry.
+ *
+ * Parameters:
+ * @param[in] PDomain Proximity Domain
+ * @param[in] Node The number of Node
+ * @param[in] Base Memory Base
+ * @param[in] Size Memory Size
+ * @param[in] BufferLocPtr Point to the address of buffer
+ *
+ * @retval UINT8 * (new buffer location ptr)
+ */
+UINT8
+STATIC
+*MakeMemEntry (
+ IN UINT8 PDomain,
+ IN UINT8 Node,
+ IN UINT32 Base,
+ IN UINT32 Size,
+ IN UINT8 *BufferLocPtr
+ )
+{
+ CPU_SRAT_MEMORY_ENTRY *psSratMemEntry;
+ UINT8 ReservedBytes;
+
+ psSratMemEntry = (CPU_SRAT_MEMORY_ENTRY *)BufferLocPtr;
+
+ psSratMemEntry->Type = AE_MEMORY; // [0] = Memory Entry
+ psSratMemEntry->Length = (UINT8)sizeof (CPU_SRAT_MEMORY_ENTRY); // [1] = 40
+ psSratMemEntry->Domain = PDomain; // [2] = Proximity Domain
+
+ // [6-7] = Reserved
+ for (ReservedBytes = 0; ReservedBytes < (UINT8)sizeof (psSratMemEntry->Reserved1); ReservedBytes++) {
+ psSratMemEntry->Reserved1[ReservedBytes] = 0;
+ }
+
+ // [8-11] = Keep 31:0 of address only -> Base Addr Low
+ psSratMemEntry->BaseAddrLow = Base << 16;
+
+ // [12-15] = Keep 39:32 of address only -> Base Addr High
+ psSratMemEntry->BaseAddrHigh = Base >> 16;
+
+ // [16-19] = Keep 31:0 of address only -> Length Low
+ psSratMemEntry->LengthAddrLow = Size << 16;
+
+ // [20-23] = Keep 39:32 of address only -> Length High
+ psSratMemEntry->LengthAddrHigh = Size >> 16;
+
+ // [24-27] = Reserved
+ for (ReservedBytes = 0; ReservedBytes < (UINT8)sizeof (psSratMemEntry->Reserved2); ReservedBytes++) {
+ psSratMemEntry->Reserved2[ReservedBytes] = 0;
+ }
+
+ // [28-31] = Flags
+ psSratMemEntry->Flags = ENABLED;
+
+ // [32-40] = Reserved
+ for (ReservedBytes = 0; ReservedBytes < (UINT8)sizeof (psSratMemEntry->Reserved3); ReservedBytes++) {
+ psSratMemEntry->Reserved3[ReservedBytes] = 0;
+ }
+ return (BufferLocPtr + (UINT8)sizeof (CPU_SRAT_MEMORY_ENTRY));
+} // MakeMemEntry()
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuTdpLimiting.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuTdpLimiting.h
new file mode 100644
index 0000000..91ccd33
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuTdpLimiting.h
@@ -0,0 +1,129 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA CPU TDP limiting Functions declarations.
+ *
+ * Contains code that declares the AGESA CPU TDP limiting related APIs
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Feature
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_TDP_LIMITING_H_
+#define _CPU_TDP_LIMITING_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (TDP_LIMIT_FAMILY_SERVICES);
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to check if TDP limiting is supported.
+ *
+ * @param[in] TdpLimitServices TDP limiting services.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] Socket Zero-based socket number.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @retval TRUE TDP limiting is supported.
+ * @retval FALSE TDP limiting is not supported.
+ *
+ */
+typedef BOOLEAN F_TDP_LIMIT_IS_SUPPORTED (
+ IN TDP_LIMIT_FAMILY_SERVICES *TdpLimitServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_TDP_LIMIT_IS_SUPPORTED *PF_TDP_LIMIT_IS_SUPPORTED;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to enable TDP limiting.
+ *
+ * @param[in] TdpLimitServices TDP limiting services.
+ * @param[in] PowerCeiling Specifies a maximum power usage limit for the platform.
+ * @param[in] StdHeader Config Handle for library, services.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_TDP_LIMIT_INIT (
+ IN TDP_LIMIT_FAMILY_SERVICES *TdpLimitServices,
+ IN UINT32 *PowerCeiling,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_TDP_LIMIT_INIT *PF_TDP_LIMIT_INIT;
+
+/**
+ * Provide the interface to the TDP limiting Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _TDP_LIMIT_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_TDP_LIMIT_IS_SUPPORTED IsTdpLimitSupported; ///< Method: Family specific call to check if TDP limiting is supported.
+ PF_TDP_LIMIT_INIT EnableTdpLimitOnSocket; ///< Method: Family specific call to enable TDP limiting.
+};
+
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N S P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+#endif // _CPU_TDP_LIMITING_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuWhea.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuWhea.c
new file mode 100644
index 0000000..f41dca9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuWhea.c
@@ -0,0 +1,288 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD WHEA Table Creation API, and related functions.
+ *
+ * Contains code that produce the ACPI WHEA related information.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionWhea.h"
+#include "cpuLateInit.h"
+#include "heapManager.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_FEATURE_CPUWHEA_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+extern OPTION_WHEA_CONFIGURATION OptionWheaConfiguration; // global user config record
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+CreateHestBank (
+ IN AMD_HEST_BANK *HestBankPtr,
+ IN UINT8 BankNum,
+ IN AMD_WHEA_INIT_DATA *WheaInitDataPtr
+ );
+
+AGESA_STATUS
+GetAcpiWheaStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **WheaMcePtr,
+ IN OUT VOID **WheaCmcPtr
+ );
+
+AGESA_STATUS
+GetAcpiWheaMain (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **WheaMcePtr,
+ IN OUT VOID **WheaCmcPtr
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * It will create the ACPI table of WHEA and return the pointer to the table.
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in, out] WheaMcePtr Point to Whea Hest Mce table
+ * @param[in, out] WheaCmcPtr Point to Whea Hest Cmc table
+ *
+ * @retval AGESA_STATUS
+ */
+AGESA_STATUS
+CreateAcpiWhea (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **WheaMcePtr,
+ IN OUT VOID **WheaCmcPtr
+ )
+{
+ AGESA_TESTPOINT (TpProcCpuEntryWhea, StdHeader);
+ return ((*(OptionWheaConfiguration.WheaFeature)) (StdHeader, WheaMcePtr, WheaCmcPtr));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This is the default routine for use when the WHEA option is NOT requested.
+ *
+ * The option install process will create and fill the transfer vector with
+ * the address of the proper routine (Main or Stub). The link optimizer will
+ * strip out of the .DLL the routine that is not used.
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in, out] WheaMcePtr Point to Whea Hest Mce table
+ * @param[in, out] WheaCmcPtr Point to Whea Hest Cmc table
+ *
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GetAcpiWheaStub (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **WheaMcePtr,
+ IN OUT VOID **WheaCmcPtr
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * It will create the ACPI tale of WHEA and return the pointer to the table.
+ *
+ * @param[in, out] StdHeader Standard Head Pointer
+ * @param[in, out] WheaMcePtr Point to Whea Hest Mce table
+ * @param[in, out] WheaCmcPtr Point to Whea Hest Cmc table
+ *
+ * @retval UINT32 AGESA_STATUS
+ */
+AGESA_STATUS
+GetAcpiWheaMain (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **WheaMcePtr,
+ IN OUT VOID **WheaCmcPtr
+ )
+{
+ UINT8 BankNum;
+ UINT8 Entries;
+ UINT16 HestMceTableSize;
+ UINT16 HestCmcTableSize;
+ UINT64 MsrData;
+ AMD_HEST_MCE_TABLE *HestMceTablePtr;
+ AMD_HEST_CMC_TABLE *HestCmcTablePtr;
+ AMD_HEST_BANK *HestBankPtr;
+ AMD_WHEA_INIT_DATA *WheaInitDataPtr;
+ ALLOCATE_HEAP_PARAMS AllocParams;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ FamilySpecificServices = NULL;
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " WHEA is created\n");
+
+ // step 1: calculate Hest table size
+ LibAmdMsrRead (MSR_MCG_CAP, &MsrData, StdHeader);
+ BankNum = (UINT8) (((MSR_MCG_CAP_STRUCT *) (&MsrData))->Count);
+ if (BankNum == 0) {
+ return AGESA_ERROR;
+ }
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->GetWheaInitData (FamilySpecificServices, (CONST VOID **) &WheaInitDataPtr, &Entries, StdHeader);
+
+ ASSERT (WheaInitDataPtr != NULL);
+ if (WheaInitDataPtr == NULL) {
+ return AGESA_ERROR;
+ }
+
+ ASSERT (WheaInitDataPtr->HestBankNum <= BankNum);
+
+ HestMceTableSize = sizeof (AMD_HEST_MCE_TABLE) + WheaInitDataPtr->HestBankNum * sizeof (AMD_HEST_BANK);
+ HestCmcTableSize = sizeof (AMD_HEST_CMC_TABLE) + WheaInitDataPtr->HestBankNum * sizeof (AMD_HEST_BANK);
+
+ HestMceTablePtr = (AMD_HEST_MCE_TABLE *) *WheaMcePtr;
+ HestCmcTablePtr = (AMD_HEST_CMC_TABLE *) *WheaCmcPtr;
+
+ // step 2: allocate a buffer by callback function
+ if ((HestMceTablePtr == NULL) || (HestCmcTablePtr == NULL)) {
+ AllocParams.RequestedBufferSize = (UINT32) (HestMceTableSize + HestCmcTableSize);
+ AllocParams.BufferHandle = AMD_WHEA_BUFFER_HANDLE;
+ AllocParams.Persist = HEAP_SYSTEM_MEM;
+
+ AGESA_TESTPOINT (TpProcCpuBeforeAllocateWheaBuffer, StdHeader);
+ if (HeapAllocateBuffer (&AllocParams, StdHeader) != AGESA_SUCCESS) {
+ return AGESA_ERROR;
+ }
+ AGESA_TESTPOINT (TpProcCpuAfterAllocateWheaBuffer, StdHeader);
+
+ HestMceTablePtr = (AMD_HEST_MCE_TABLE *) AllocParams.BufferPtr;
+ HestCmcTablePtr = (AMD_HEST_CMC_TABLE *) ((UINT8 *) (HestMceTablePtr + 1) + (WheaInitDataPtr->HestBankNum * sizeof (AMD_HEST_BANK)));
+ }
+
+ // step 3: fill in Hest MCE table
+ HestMceTablePtr->TblLength = HestMceTableSize;
+ HestMceTablePtr->GlobCapInitDataLSD = WheaInitDataPtr->GlobCapInitDataLSD;
+ HestMceTablePtr->GlobCapInitDataMSD = WheaInitDataPtr->GlobCapInitDataMSD;
+ HestMceTablePtr->GlobCtrlInitDataLSD = WheaInitDataPtr->GlobCtrlInitDataLSD;
+ HestMceTablePtr->GlobCtrlInitDataMSD = WheaInitDataPtr->GlobCtrlInitDataMSD;
+ HestMceTablePtr->NumHWBanks = WheaInitDataPtr->HestBankNum;
+
+ HestBankPtr = (AMD_HEST_BANK *) (HestMceTablePtr + 1);
+ CreateHestBank (HestBankPtr, WheaInitDataPtr->HestBankNum, WheaInitDataPtr);
+
+ // step 4: fill in Hest CMC table
+ HestCmcTablePtr->NumHWBanks = WheaInitDataPtr->HestBankNum;
+ HestCmcTablePtr->TblLength = HestCmcTableSize;
+
+ HestBankPtr = (AMD_HEST_BANK *) (HestCmcTablePtr + 1);
+ CreateHestBank (HestBankPtr, WheaInitDataPtr->HestBankNum, WheaInitDataPtr);
+
+ // step 5: fill in the incoming structure
+ *WheaMcePtr = HestMceTablePtr;
+ *WheaCmcPtr = HestCmcTablePtr;
+
+ return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * It will create Bank structure for Hest table
+ *
+ * @param[in] HestBankPtr Pointer to the Hest Back structure
+ * @param[in] BankNum The number of Bank
+ * @param[in] WheaInitDataPtr Pointer to the AMD_WHEA_INIT_DATA structure
+ *
+ */
+VOID
+STATIC
+CreateHestBank (
+ IN AMD_HEST_BANK *HestBankPtr,
+ IN UINT8 BankNum,
+ IN AMD_WHEA_INIT_DATA *WheaInitDataPtr
+ )
+{
+ UINT8 BankIndex;
+ for (BankIndex = 0; BankIndex < BankNum; BankIndex++) {
+ HestBankPtr->BankNum = BankIndex;
+ HestBankPtr->ClrStatusOnInit = WheaInitDataPtr->ClrStatusOnInit;
+ HestBankPtr->StatusDataFormat = WheaInitDataPtr->StatusDataFormat;
+ HestBankPtr->ConfWriteEn = WheaInitDataPtr->ConfWriteEn;
+ HestBankPtr->CtrlRegMSRAddr = WheaInitDataPtr->HestBankInitData[BankIndex].CtrlRegMSRAddr;
+ HestBankPtr->CtrlInitDataLSD = WheaInitDataPtr->HestBankInitData[BankIndex].CtrlInitDataLSD;
+ HestBankPtr->CtrlInitDataMSD = WheaInitDataPtr->HestBankInitData[BankIndex].CtrlInitDataMSD;
+ HestBankPtr->StatRegMSRAddr = WheaInitDataPtr->HestBankInitData[BankIndex].StatRegMSRAddr;
+ HestBankPtr->AddrRegMSRAddr = WheaInitDataPtr->HestBankInitData[BankIndex].AddrRegMSRAddr;
+ HestBankPtr->MiscRegMSRAddr = WheaInitDataPtr->HestBankInitData[BankIndex].MiscRegMSRAddr;
+ HestBankPtr++;
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/S3.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/S3.c
new file mode 100644
index 0000000..7feb3fa
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/S3.c
@@ -0,0 +1,1274 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * ACPI S3 Support routines
+ *
+ * Contains routines needed for supporting resume from the ACPI S3 sleep state.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Interface
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_S3_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+SaveDeviceContext (
+ IN DEVICE_BLOCK_HEADER *DeviceList,
+ IN CALL_POINTS CallPoint,
+ OUT UINT32 *ActualBufferSize,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+SavePciDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PCI_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT VOID **OrMask
+ );
+
+VOID
+SaveConditionalPciDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT VOID **OrMask
+ );
+
+VOID
+SaveMsrDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN MSR_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT UINT64 **OrMask
+ );
+
+VOID
+SaveConditionalMsrDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT UINT64 **OrMask
+ );
+
+VOID
+RestorePciDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PCI_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT VOID **OrMask
+ );
+
+VOID
+RestoreConditionalPciDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT VOID **OrMask
+ );
+
+VOID
+RestoreMsrDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN MSR_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT UINT64 **OrMask
+ );
+
+VOID
+RestoreConditionalMsrDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT UINT64 **OrMask
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Saves all devices in the given device list.
+ *
+ * This traverses the entire device list twice. In the first pass, we save
+ * all devices identified as Pre ESR. In the second pass, we save devices
+ * marked as post ESR.
+ *
+ * @param[in] DeviceList Beginning of the device list to save.
+ * @param[in] Storage Beginning of the context buffer.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[out] ActualBufferSize Actual size used in saving the device list.
+ * @param[in] StdHeader AMD standard header config param.
+ *
+ */
+VOID
+SaveDeviceListContext (
+ IN DEVICE_BLOCK_HEADER *DeviceList,
+ IN VOID *Storage,
+ IN CALL_POINTS CallPoint,
+ OUT UINT32 *ActualBufferSize,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ // Copy device list over
+ LibAmdMemCopy (Storage,
+ DeviceList,
+ (UINTN) DeviceList->RelativeOrMaskOffset,
+ StdHeader);
+ SaveDeviceContext (Storage, CallPoint, ActualBufferSize, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Saves all devices in the given device list.
+ *
+ * This traverses the entire device list twice. In the first pass, we save
+ * all devices identified as Pre ESR. In the second pass, we save devices
+ * marked as post ESR.
+ *
+ * @param[in,out] DeviceList Beginning of the device list to save.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[out] ActualBufferSize Actual size used in saving the device list.
+ * @param[in] StdHeader AMD standard header config param.
+ *
+ */
+VOID
+SaveDeviceContext (
+ IN DEVICE_BLOCK_HEADER *DeviceList,
+ IN CALL_POINTS CallPoint,
+ OUT UINT32 *ActualBufferSize,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ DEVICE_DESCRIPTORS Device;
+ UINT16 i;
+ UINT64 StartAddress;
+ UINT64 EndAddress;
+ VOID *OrMask;
+
+ StartAddress = (UINT64)(UINT32) DeviceList;
+ Device.CommonDeviceHeader = (DEVICE_DESCRIPTOR *) &DeviceList[1];
+ OrMask = (UINT8 *) DeviceList + DeviceList->RelativeOrMaskOffset;
+
+ // Process Pre ESR List
+ for (i = 0; i < DeviceList->NumDevices; i++) {
+ switch (Device.CommonDeviceHeader->Type) {
+ case DEV_TYPE_PCI_PRE_ESR:
+ SavePciDevice (StdHeader, Device.PciDevice, CallPoint, &OrMask);
+ // Fall through to advance the pointer after saving context
+ case DEV_TYPE_PCI:
+ Device.PciDevice++;
+ break;
+ case DEV_TYPE_CPCI_PRE_ESR:
+ SaveConditionalPciDevice (StdHeader, Device.CPciDevice, CallPoint, &OrMask);
+ // Fall through to advance the pointer after saving context
+ case DEV_TYPE_CPCI:
+ Device.CPciDevice++;
+ break;
+ case DEV_TYPE_MSR_PRE_ESR:
+ SaveMsrDevice (StdHeader, Device.MsrDevice, CallPoint, (UINT64 **) &OrMask);
+ // Fall through to advance the pointer after saving context
+ case DEV_TYPE_MSR:
+ Device.MsrDevice++;
+ break;
+ case DEV_TYPE_CMSR_PRE_ESR:
+ SaveConditionalMsrDevice (StdHeader, Device.CMsrDevice, CallPoint, (UINT64 **) &OrMask);
+ // Fall through to advance the pointer after saving context
+ case DEV_TYPE_CMSR:
+ Device.CMsrDevice++;
+ break;
+ }
+ }
+
+ Device.CommonDeviceHeader = (DEVICE_DESCRIPTOR *) &DeviceList[1];
+ // Process Post ESR List
+ for (i = 0; i < DeviceList->NumDevices; i++) {
+ switch (Device.CommonDeviceHeader->Type) {
+ case DEV_TYPE_PCI:
+ SavePciDevice (StdHeader, Device.PciDevice, CallPoint, &OrMask);
+ // Fall through to advance the pointer after saving context
+ case DEV_TYPE_PCI_PRE_ESR:
+ Device.PciDevice++;
+ break;
+ case DEV_TYPE_CPCI:
+ SaveConditionalPciDevice (StdHeader, Device.CPciDevice, CallPoint, &OrMask);
+ // Fall through to advance the pointer after saving context
+ case DEV_TYPE_CPCI_PRE_ESR:
+ Device.CPciDevice++;
+ break;
+ case DEV_TYPE_MSR:
+ SaveMsrDevice (StdHeader, Device.MsrDevice, CallPoint, (UINT64 **) &OrMask);
+ // Fall through to advance the pointer after saving context
+ case DEV_TYPE_MSR_PRE_ESR:
+ Device.MsrDevice++;
+ break;
+ case DEV_TYPE_CMSR:
+ SaveConditionalMsrDevice (StdHeader, Device.CMsrDevice, CallPoint, (UINT64 **) &OrMask);
+ // Fall through to advance the pointer after saving context
+ case DEV_TYPE_CMSR_PRE_ESR:
+ Device.CMsrDevice++;
+ break;
+ }
+ }
+ EndAddress = (UINT64)(UINT32) OrMask;
+ *ActualBufferSize = (UINT32) (EndAddress - StartAddress);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Saves the context of a PCI device.
+ *
+ * This traverses the provided register list saving PCI registers.
+ *
+ * @param[in] StdHeader AMD standard header config param.
+ * @param[in] Device PCI device to restore.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask Current buffer pointer of raw register values.
+ *
+ */
+VOID
+SavePciDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PCI_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT VOID **OrMask
+ )
+{
+ UINT8 RegSizeInBytes;
+ UINT8 SpecialCaseIndex;
+ UINT8 *IntermediatePtr;
+ UINT16 i;
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 AndMask;
+ ACCESS_WIDTH AccessWidth;
+ AGESA_STATUS IgnoredSts;
+ PCI_ADDR PciAddress;
+ PCI_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+ GetSocketModuleOfNode ((UINT32) Device->Node,
+ &Socket,
+ &Module,
+ StdHeader);
+ GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+
+ if (CallPoint == INIT_RESUME) {
+ MemFS3GetPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ } else {
+ S3GetPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ }
+
+ for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+ PciAddress.Address.Function = RegisterHdr->RegisterList[i].Function;
+ PciAddress.Address.Register = RegisterHdr->RegisterList[i].Offset;
+ RegSizeInBytes = RegisterHdr->RegisterList[i].Type.RegisterSize;
+ switch (RegSizeInBytes) {
+ case 1:
+ AndMask = 0xFFFFFFFF & ((UINT8) RegisterHdr->RegisterList[i].AndMask);
+ AccessWidth = AccessS3SaveWidth8;
+ break;
+ case 2:
+ AndMask = 0xFFFFFFFF & ((UINT16) RegisterHdr->RegisterList[i].AndMask);
+ AccessWidth = AccessS3SaveWidth16;
+ break;
+ case 3:
+ // In this case, we don't need to save a register. We just need to call a special
+ // function to do certain things in the save and resume sequence.
+ // This should not be used in a non-special case.
+ AndMask = 0;
+ RegSizeInBytes = 0;
+ AccessWidth = 0;
+ break;
+ default:
+ AndMask = RegisterHdr->RegisterList[i].AndMask;
+ RegSizeInBytes = 4;
+ AccessWidth = AccessS3SaveWidth32;
+ break;
+ }
+ if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+ ASSERT ((AndMask != 0) && (RegSizeInBytes != 0) && (AccessWidth != 0));
+ LibAmdPciRead (AccessWidth, PciAddress, *OrMask, StdHeader);
+ } else {
+ SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+ RegisterHdr->SpecialCases[SpecialCaseIndex].Save (AccessWidth, PciAddress, *OrMask, StdHeader);
+ }
+ if (AndMask != 0) {
+ // If AndMask is 0, then it is a not-care. Don't need to apply it to the OrMask
+ **((UINT32 **) OrMask) &= AndMask;
+ }
+ if ((RegSizeInBytes == 0) && (**((UINT32 **) OrMask) == RESTART_FROM_BEGINNING_LIST)) {
+ // Restart from the beginning of the register list
+ i = 0xFFFF;
+ }
+ IntermediatePtr = (UINT8 *) *OrMask;
+ *OrMask = &IntermediatePtr[RegSizeInBytes]; // += RegSizeInBytes;
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Saves the context of a 'conditional' PCI device.
+ *
+ * This traverses the provided register list saving PCI registers when appropriate.
+ *
+ * @param[in] StdHeader AMD standard header config param.
+ * @param[in] Device 'conditional' PCI device to restore.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask Current buffer pointer of raw register values.
+ *
+ */
+VOID
+SaveConditionalPciDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT VOID **OrMask
+ )
+{
+ UINT8 RegSizeInBytes;
+ UINT8 SpecialCaseIndex;
+ UINT8 *IntermediatePtr;
+ UINT16 i;
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 AndMask;
+ ACCESS_WIDTH AccessWidth;
+ AGESA_STATUS IgnoredSts;
+ PCI_ADDR PciAddress;
+ CPCI_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+ GetSocketModuleOfNode ((UINT32) Device->Node,
+ &Socket,
+ &Module,
+ StdHeader);
+ GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+
+ if (CallPoint == INIT_RESUME) {
+ MemFS3GetCPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ } else {
+ S3GetCPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ }
+
+ for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+ if (((Device->Mask1 & RegisterHdr->RegisterList[i].Mask1) != 0) &&
+ ((Device->Mask2 & RegisterHdr->RegisterList[i].Mask2) != 0)) {
+ PciAddress.Address.Function = RegisterHdr->RegisterList[i].Function;
+ PciAddress.Address.Register = RegisterHdr->RegisterList[i].Offset;
+ RegSizeInBytes = RegisterHdr->RegisterList[i].Type.RegisterSize;
+ switch (RegSizeInBytes) {
+ case 1:
+ AndMask = 0xFFFFFFFF & ((UINT8) RegisterHdr->RegisterList[i].AndMask);
+ AccessWidth = AccessS3SaveWidth8;
+ break;
+ case 2:
+ AndMask = 0xFFFFFFFF & ((UINT16) RegisterHdr->RegisterList[i].AndMask);
+ AccessWidth = AccessS3SaveWidth16;
+ break;
+ case 3:
+ // In this case, we don't need to save a register. We just need to call a special
+ // function to do certain things in the save and resume sequence.
+ // This should not be used in a non-special case.
+ AndMask = 0;
+ RegSizeInBytes = 0;
+ AccessWidth = 0;
+ break;
+ default:
+ AndMask = RegisterHdr->RegisterList[i].AndMask;
+ RegSizeInBytes = 4;
+ AccessWidth = AccessS3SaveWidth32;
+ break;
+ }
+ if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+ ASSERT ((AndMask != 0) && (RegSizeInBytes != 0) && (AccessWidth != 0));
+ LibAmdPciRead (AccessWidth, PciAddress, *OrMask, StdHeader);
+ } else {
+ SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+ RegisterHdr->SpecialCases[SpecialCaseIndex].Save (AccessWidth, PciAddress, *OrMask, StdHeader);
+ }
+ if (AndMask != 0) {
+ // If AndMask is 0, then it is a not-care. Don't need to apply it to the OrMask
+ **((UINT32 **) OrMask) &= AndMask;
+ }
+ if ((RegSizeInBytes == 0) && (**((UINT32 **) OrMask) == RESTART_FROM_BEGINNING_LIST)) {
+ // Restart from the beginning of the register list
+ i = 0xFFFF;
+ }
+ IntermediatePtr = (UINT8 *) *OrMask;
+ *OrMask = &IntermediatePtr[RegSizeInBytes]; // += RegSizeInBytes;
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Saves the context of an MSR device.
+ *
+ * This traverses the provided register list saving MSRs.
+ *
+ * @param[in] StdHeader AMD standard header config param.
+ * @param[in] Device MSR device to restore.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask Current buffer pointer of raw register values.
+ *
+ */
+VOID
+SaveMsrDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN MSR_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT UINT64 **OrMask
+ )
+{
+ UINT8 SpecialCaseIndex;
+ UINT16 i;
+ MSR_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+ if (CallPoint == INIT_RESUME) {
+ MemFS3GetMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ } else {
+ S3GetMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ }
+
+ for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+ if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+ LibAmdMsrRead (RegisterHdr->RegisterList[i].Address, *OrMask, StdHeader);
+ } else {
+ SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+ RegisterHdr->SpecialCases[SpecialCaseIndex].Save (RegisterHdr->RegisterList[i].Address, *OrMask, StdHeader);
+ }
+ **OrMask &= RegisterHdr->RegisterList[i].AndMask;
+ (*OrMask)++;
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Saves the context of a 'conditional' MSR device.
+ *
+ * This traverses the provided register list saving MSRs when appropriate.
+ *
+ * @param[in] StdHeader AMD standard header config param.
+ * @param[in] Device 'conditional' MSR device to restore.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask Current buffer pointer of raw register values.
+ *
+ */
+VOID
+SaveConditionalMsrDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT UINT64 **OrMask
+ )
+{
+ UINT8 SpecialCaseIndex;
+ UINT16 i;
+ CMSR_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+ if (CallPoint == INIT_RESUME) {
+ MemFS3GetCMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ } else {
+ S3GetCMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ }
+
+ for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+ if (((Device->Mask1 & RegisterHdr->RegisterList[i].Mask1) != 0) &&
+ ((Device->Mask2 & RegisterHdr->RegisterList[i].Mask2) != 0)) {
+ if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+ LibAmdMsrRead (RegisterHdr->RegisterList[i].Address, (UINT64 *) *OrMask, StdHeader);
+ } else {
+ SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+ RegisterHdr->SpecialCases[SpecialCaseIndex].Save (RegisterHdr->RegisterList[i].Address, (UINT64 *) *OrMask, StdHeader);
+ }
+ **OrMask &= RegisterHdr->RegisterList[i].AndMask;
+ (*OrMask)++;
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determines the maximum amount of space required to store all raw register
+ * values for the given device list.
+ *
+ * This traverses the entire device list, and calculates the worst case size
+ * of each device in the device list.
+ *
+ * @param[in] DeviceList Beginning of the device list.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[in] StdHeader AMD standard header config param.
+ *
+ * @retval Size in bytes required for storing all registers.
+ */
+UINT32
+GetWorstCaseContextSize (
+ IN DEVICE_BLOCK_HEADER *DeviceList,
+ IN CALL_POINTS CallPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 WorstCaseSize;
+ DEVICE_DESCRIPTORS Device;
+ UINT16 i;
+ REGISTER_BLOCK_HEADERS RegisterHdr;
+
+ WorstCaseSize = DeviceList->RelativeOrMaskOffset;
+ Device.CommonDeviceHeader = (DEVICE_DESCRIPTOR *) &DeviceList[1];
+
+ // Process Device List
+ for (i = 0; i < DeviceList->NumDevices; i++) {
+ switch (Device.CommonDeviceHeader->Type) {
+ case DEV_TYPE_PCI_PRE_ESR:
+ // PRE_ESR and post ESR take the same amount of space
+ case DEV_TYPE_PCI:
+ if (CallPoint == INIT_RESUME) {
+ MemFS3GetPciDeviceRegisterList (Device.PciDevice, &RegisterHdr.PciRegisters, StdHeader);
+ } else {
+ S3GetPciDeviceRegisterList (Device.PciDevice, &RegisterHdr.PciRegisters, StdHeader);
+ }
+ WorstCaseSize += (RegisterHdr.PciRegisters->NumRegisters * 4);
+ Device.PciDevice++;
+ break;
+ case DEV_TYPE_CPCI_PRE_ESR:
+ // PRE_ESR and post ESR take the same amount of space
+ case DEV_TYPE_CPCI:
+ if (CallPoint == INIT_RESUME) {
+ MemFS3GetCPciDeviceRegisterList (Device.CPciDevice, &RegisterHdr.CPciRegisters, StdHeader);
+ } else {
+ S3GetCPciDeviceRegisterList (Device.CPciDevice, &RegisterHdr.CPciRegisters, StdHeader);
+ }
+ WorstCaseSize += (RegisterHdr.CPciRegisters->NumRegisters * 4);
+ Device.CPciDevice++;
+ break;
+ case DEV_TYPE_MSR_PRE_ESR:
+ // PRE_ESR and post ESR take the same amount of space
+ case DEV_TYPE_MSR:
+ if (CallPoint == INIT_RESUME) {
+ MemFS3GetMsrDeviceRegisterList (Device.MsrDevice, &RegisterHdr.MsrRegisters, StdHeader);
+ } else {
+ S3GetMsrDeviceRegisterList (Device.MsrDevice, &RegisterHdr.MsrRegisters, StdHeader);
+ }
+ WorstCaseSize += (RegisterHdr.MsrRegisters->NumRegisters * 8);
+ Device.MsrDevice++;
+ break;
+ case DEV_TYPE_CMSR_PRE_ESR:
+ // PRE_ESR and post ESR take the same amount of space
+ case DEV_TYPE_CMSR:
+ if (CallPoint == INIT_RESUME) {
+ MemFS3GetCMsrDeviceRegisterList (Device.CMsrDevice, &RegisterHdr.CMsrRegisters, StdHeader);
+ } else {
+ S3GetCMsrDeviceRegisterList (Device.CMsrDevice, &RegisterHdr.CMsrRegisters, StdHeader);
+ }
+ WorstCaseSize += (RegisterHdr.CMsrRegisters->NumRegisters * 8);
+ Device.CMsrDevice++;
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ }
+ return (WorstCaseSize);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores all devices marked as 'before exiting self-refresh.'
+ *
+ * This traverses the entire device list, restoring all devices identified
+ * as Pre ESR.
+ *
+ * @param[in,out] OrMaskPtr Current buffer pointer of raw register values.
+ * @param[in] Storage Beginning of the device list.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[in] StdHeader AMD standard header config param.
+ *
+ */
+VOID
+RestorePreESRContext (
+ OUT VOID **OrMaskPtr,
+ IN VOID *Storage,
+ IN CALL_POINTS CallPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ DEVICE_DESCRIPTORS Device;
+ UINT16 i;
+ DEVICE_BLOCK_HEADER *DeviceList;
+
+ DeviceList = (DEVICE_BLOCK_HEADER *) Storage;
+ Device.CommonDeviceHeader = (DEVICE_DESCRIPTOR *) &DeviceList[1];
+ *OrMaskPtr = (UINT8 *) DeviceList + DeviceList->RelativeOrMaskOffset;
+
+ // Process Pre ESR List
+ for (i = 0; i < DeviceList->NumDevices; i++) {
+ switch (Device.CommonDeviceHeader->Type) {
+ case DEV_TYPE_PCI_PRE_ESR:
+ RestorePciDevice (StdHeader, Device.PciDevice, CallPoint, OrMaskPtr);
+ // Fall through to advance the pointer after restoring context
+ case DEV_TYPE_PCI:
+ Device.PciDevice++;
+ break;
+ case DEV_TYPE_CPCI_PRE_ESR:
+ RestoreConditionalPciDevice (StdHeader, Device.CPciDevice, CallPoint, OrMaskPtr);
+ // Fall through to advance the pointer after restoring context
+ case DEV_TYPE_CPCI:
+ Device.CPciDevice++;
+ break;
+ case DEV_TYPE_MSR_PRE_ESR:
+ RestoreMsrDevice (StdHeader, Device.MsrDevice, CallPoint, (UINT64 **) OrMaskPtr);
+ // Fall through to advance the pointer after restoring context
+ case DEV_TYPE_MSR:
+ Device.MsrDevice++;
+ break;
+ case DEV_TYPE_CMSR_PRE_ESR:
+ RestoreConditionalMsrDevice (StdHeader, Device.CMsrDevice, CallPoint, (UINT64 **) OrMaskPtr);
+ // Fall through to advance the pointer after restoring context
+ case DEV_TYPE_CMSR:
+ Device.CMsrDevice++;
+ break;
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores all devices marked as 'after exiting self-refresh.'
+ *
+ * This traverses the entire device list, restoring all devices identified
+ * as Post ESR.
+ *
+ * @param[in] OrMaskPtr Current buffer pointer of raw register values.
+ * @param[in] Storage Beginning of the device list.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[in] StdHeader AMD standard header config param.
+ *
+ */
+VOID
+RestorePostESRContext (
+ IN VOID *OrMaskPtr,
+ IN VOID *Storage,
+ IN CALL_POINTS CallPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ DEVICE_DESCRIPTORS Device;
+ UINT16 i;
+ DEVICE_BLOCK_HEADER *DeviceList;
+
+ DeviceList = (DEVICE_BLOCK_HEADER *) Storage;
+ Device.CommonDeviceHeader = (DEVICE_DESCRIPTOR *) &DeviceList[1];
+
+ // Process Pre ESR List
+ for (i = 0; i < DeviceList->NumDevices; i++) {
+ switch (Device.CommonDeviceHeader->Type) {
+ case DEV_TYPE_PCI:
+ RestorePciDevice (StdHeader, Device.PciDevice, CallPoint, &OrMaskPtr);
+ // Fall through to advance the pointer after restoring context
+ case DEV_TYPE_PCI_PRE_ESR:
+ Device.PciDevice++;
+ break;
+ case DEV_TYPE_CPCI:
+ RestoreConditionalPciDevice (StdHeader, Device.CPciDevice, CallPoint, &OrMaskPtr);
+ // Fall through to advance the pointer after restoring context
+ case DEV_TYPE_CPCI_PRE_ESR:
+ Device.CPciDevice++;
+ break;
+ case DEV_TYPE_MSR:
+ RestoreMsrDevice (StdHeader, Device.MsrDevice, CallPoint, (UINT64 **) &OrMaskPtr);
+ // Fall through to advance the pointer after restoring context
+ case DEV_TYPE_MSR_PRE_ESR:
+ Device.MsrDevice++;
+ break;
+ case DEV_TYPE_CMSR:
+ RestoreConditionalMsrDevice (StdHeader, Device.CMsrDevice, CallPoint, (UINT64 **) &OrMaskPtr);
+ // Fall through to advance the pointer after restoring context
+ case DEV_TYPE_CMSR_PRE_ESR:
+ Device.CMsrDevice++;
+ break;
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores the context of a PCI device.
+ *
+ * This traverses the provided register list restoring PCI registers.
+ *
+ * @param[in] StdHeader AMD standard header config param.
+ * @param[in] Device 'conditional' PCI device to restore.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask Current buffer pointer of raw register values.
+ *
+ */
+VOID
+RestorePciDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PCI_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT VOID **OrMask
+ )
+{
+ UINT8 RegSizeInBytes;
+ UINT8 SpecialCaseIndex;
+ UINT8 *IntermediatePtr;
+ UINT8 BootMode;
+ UINT16 i;
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 AndMask;
+ UINT32 RegValueRead;
+ UINT32 RegValueWrite;
+ ACCESS_WIDTH AccessWidth;
+ AGESA_STATUS IgnoredSts;
+ PCI_ADDR PciAddress;
+ PCI_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+ GetSocketModuleOfNode ((UINT32) Device->Node,
+ &Socket,
+ &Module,
+ StdHeader);
+ GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+
+ if (CallPoint == INIT_RESUME) {
+ MemFS3GetPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ } else {
+ S3GetPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ }
+
+ BootMode = S3_RESUME_MODE;
+ if (StdHeader->Func == AMD_INIT_POST) {
+ BootMode = RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE;
+ }
+
+ for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+ PciAddress.Address.Function = RegisterHdr->RegisterList[i].Function;
+ PciAddress.Address.Register = RegisterHdr->RegisterList[i].Offset;
+ RegSizeInBytes = RegisterHdr->RegisterList[i].Type.RegisterSize;
+ switch (RegSizeInBytes) {
+ case 1:
+ AndMask = 0xFFFFFFFF & ((UINT8) RegisterHdr->RegisterList[i].AndMask);
+ RegValueWrite = **(UINT8 **)OrMask;
+ AccessWidth = AccessS3SaveWidth8;
+ break;
+ case 2:
+ AndMask = 0xFFFFFFFF & ((UINT16) RegisterHdr->RegisterList[i].AndMask);
+ RegValueWrite = **(UINT16 **)OrMask;
+ AccessWidth = AccessS3SaveWidth16;
+ break;
+ case 3:
+ // In this case, we don't need to restore a register. We just need to call a special
+ // function to do certain things in the save and resume sequence.
+ // This should not be used in a non-special case.
+ AndMask = 0;
+ RegValueWrite = 0;
+ RegSizeInBytes = 0;
+ AccessWidth = 0;
+ break;
+ default:
+ AndMask = RegisterHdr->RegisterList[i].AndMask;
+ RegSizeInBytes = 4;
+ RegValueWrite = **(UINT32 **)OrMask;
+ AccessWidth = AccessS3SaveWidth32;
+ break;
+ }
+ if ((RegisterHdr->RegisterList[i].BootMode == 0) || ((BootMode & RegisterHdr->RegisterList[i].BootMode) != 0)) {
+ // Do not restore the register if not in the right boot mode
+ // Pointer to the saved data buffer still needs to be adjusted as data will be saved regardless of boot mode
+ if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+ ASSERT ((AndMask != 0) && (RegSizeInBytes != 0) && (AccessWidth != 0));
+ LibAmdPciRead (AccessWidth, PciAddress, &RegValueRead, StdHeader);
+ RegValueWrite |= RegValueRead & (~AndMask);
+ LibAmdPciWrite (AccessWidth, PciAddress, &RegValueWrite, StdHeader);
+ } else {
+ SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+ if (AndMask != 0) {
+ RegisterHdr->SpecialCases[SpecialCaseIndex].Save (AccessWidth,
+ PciAddress,
+ &RegValueRead,
+ StdHeader);
+ RegValueWrite |= RegValueRead & (~AndMask);
+ }
+ RegisterHdr->SpecialCases[SpecialCaseIndex].Restore (AccessWidth,
+ PciAddress,
+ &RegValueWrite,
+ StdHeader);
+ }
+ IDS_OPTION_HOOK (IDS_AFTER_RESTORING_PCI_REG, RegisterHdr, StdHeader);
+ }
+ IntermediatePtr = (UINT8 *) *OrMask;
+ *OrMask = &IntermediatePtr[RegSizeInBytes]; // += RegSizeInBytes;
+ if ((RegSizeInBytes == 0) && (RegValueWrite == RESTART_FROM_BEGINNING_LIST)) {
+ // Restart from the beginning of the register list
+ i = 0xFFFF;
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores the context of a 'conditional' PCI device.
+ *
+ * This traverses the provided register list restoring PCI registers when appropriate.
+ *
+ * @param[in] StdHeader AMD standard header config param.
+ * @param[in] Device 'conditional' PCI device to restore.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask Current buffer pointer of raw register values.
+ *
+ */
+VOID
+RestoreConditionalPciDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT VOID **OrMask
+ )
+{
+ UINT8 RegSizeInBytes;
+ UINT8 SpecialCaseIndex;
+ UINT8 *IntermediatePtr;
+ UINT8 BootMode;
+ UINT16 i;
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 RegValueRead;
+ UINT32 RegValueWrite;
+ UINT32 AndMask;
+ ACCESS_WIDTH AccessWidth;
+ AGESA_STATUS IgnoredSts;
+ PCI_ADDR PciAddress;
+ CPCI_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+ GetSocketModuleOfNode ((UINT32) Device->Node,
+ &Socket,
+ &Module,
+ StdHeader);
+ GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts);
+
+ if (CallPoint == INIT_RESUME) {
+ MemFS3GetCPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ } else {
+ S3GetCPciDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ }
+
+ BootMode = S3_RESUME_MODE;
+ if (StdHeader->Func == AMD_INIT_POST) {
+ BootMode = RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE;
+ }
+
+ for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+ if (((Device->Mask1 & RegisterHdr->RegisterList[i].Mask1) != 0) &&
+ ((Device->Mask2 & RegisterHdr->RegisterList[i].Mask2) != 0)) {
+ PciAddress.Address.Function = RegisterHdr->RegisterList[i].Function;
+ PciAddress.Address.Register = RegisterHdr->RegisterList[i].Offset;
+ RegSizeInBytes = RegisterHdr->RegisterList[i].Type.RegisterSize;
+ switch (RegSizeInBytes) {
+ case 1:
+ AndMask = 0xFFFFFFFF & ((UINT8) RegisterHdr->RegisterList[i].AndMask);
+ RegValueWrite = **(UINT8 **)OrMask;
+ AccessWidth = AccessS3SaveWidth8;
+ break;
+ case 2:
+ AndMask = 0xFFFFFFFF & ((UINT16) RegisterHdr->RegisterList[i].AndMask);
+ RegValueWrite = **(UINT16 **)OrMask;
+ AccessWidth = AccessS3SaveWidth16;
+ break;
+ case 3:
+ // In this case, we don't need to restore a register. We just need to call a special
+ // function to do certain things in the save and resume sequence.
+ // This should not be used in a non-special case.
+ AndMask = 0;
+ RegValueWrite = 0;
+ RegSizeInBytes = 0;
+ AccessWidth = 0;
+ break;
+ default:
+ AndMask = RegisterHdr->RegisterList[i].AndMask;
+ RegSizeInBytes = 4;
+ RegValueWrite = **(UINT32 **)OrMask;
+ AccessWidth = AccessS3SaveWidth32;
+ break;
+ }
+ if ((RegisterHdr->RegisterList[i].BootMode == 0) || ((BootMode & RegisterHdr->RegisterList[i].BootMode) != 0)) {
+ // Do not restore the register if not in the right boot mode
+ // Pointer to the saved data buffer still needs to be adjusted as data will be saved regardless of boot mode
+ if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+ LibAmdPciRead (AccessWidth, PciAddress, &RegValueRead, StdHeader);
+ RegValueWrite |= RegValueRead & (~AndMask);
+ LibAmdPciWrite (AccessWidth, PciAddress, &RegValueWrite, StdHeader);
+ } else {
+ SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+ if (AndMask != 0) {
+ RegisterHdr->SpecialCases[SpecialCaseIndex].Save (AccessWidth,
+ PciAddress,
+ &RegValueRead,
+ StdHeader);
+ RegValueWrite |= RegValueRead & (~AndMask);
+ }
+ RegisterHdr->SpecialCases[SpecialCaseIndex].Restore (AccessWidth,
+ PciAddress,
+ &RegValueWrite,
+ StdHeader);
+ }
+ IDS_OPTION_HOOK (IDS_AFTER_RESTORING_PCI_REG, RegisterHdr, StdHeader);
+ }
+ IntermediatePtr = (UINT8 *) *OrMask;
+ *OrMask = &IntermediatePtr[RegSizeInBytes];
+ if ((RegSizeInBytes == 0) && (RegValueWrite == RESTART_FROM_BEGINNING_LIST)) {
+ // Restart from the beginning of the register list
+ i = 0xFFFF;
+ }
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores the context of an MSR device.
+ *
+ * This traverses the provided register list restoring MSRs.
+ *
+ * @param[in] StdHeader AMD standard header config param.
+ * @param[in] Device MSR device to restore.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask Current buffer pointer of raw register values.
+ *
+ */
+VOID
+RestoreMsrDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN MSR_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT UINT64 **OrMask
+ )
+{
+ UINT8 SpecialCaseIndex;
+ UINT8 BootMode;
+ UINT16 i;
+ UINT64 RegValueRead;
+ UINT64 RegValueWrite;
+ MSR_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+ if (CallPoint == INIT_RESUME) {
+ MemFS3GetMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ } else {
+ S3GetMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ }
+
+ BootMode = S3_RESUME_MODE;
+ if (StdHeader->Func == AMD_INIT_POST) {
+ BootMode = RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE;
+ }
+
+ for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+ if ((RegisterHdr->RegisterList[i].BootMode == 0) || ((BootMode & RegisterHdr->RegisterList[i].BootMode) != 0)) {
+ // Do not restore the register if not in the right boot mode
+ // Pointer to the saved data buffer still needs to be adjusted as data will be saved regardless of boot mode
+ RegValueWrite = **OrMask;
+ if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+ LibAmdMsrRead (RegisterHdr->RegisterList[i].Address, &RegValueRead, StdHeader);
+ RegValueWrite |= RegValueRead & (~RegisterHdr->RegisterList[i].AndMask);
+ LibAmdMsrWrite (RegisterHdr->RegisterList[i].Address, &RegValueWrite, StdHeader);
+ } else {
+ SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+ RegisterHdr->SpecialCases[SpecialCaseIndex].Save (RegisterHdr->RegisterList[i].Address,
+ &RegValueRead,
+ StdHeader);
+ RegValueWrite |= RegValueRead & (~RegisterHdr->RegisterList[i].AndMask);
+ RegisterHdr->SpecialCases[SpecialCaseIndex].Restore (RegisterHdr->RegisterList[i].Address,
+ &RegValueWrite,
+ StdHeader);
+ }
+ }
+ (*OrMask)++;
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Restores the context of a 'conditional' MSR device.
+ *
+ * This traverses the provided register list restoring MSRs when appropriate.
+ *
+ * @param[in] StdHeader AMD standard header config param.
+ * @param[in] Device 'conditional' MSR device to restore.
+ * @param[in] CallPoint Indicates whether this is AMD_INIT_RESUME or
+ * AMD_S3LATE_RESTORE.
+ * @param[in,out] OrMask Current buffer pointer of raw register values.
+ *
+ */
+VOID
+RestoreConditionalMsrDevice (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+ IN CALL_POINTS CallPoint,
+ IN OUT UINT64 **OrMask
+ )
+{
+ UINT8 SpecialCaseIndex;
+ UINT8 BootMode;
+ UINT16 i;
+ UINT64 RegValueRead;
+ UINT64 RegValueWrite;
+ CMSR_REGISTER_BLOCK_HEADER *RegisterHdr;
+
+ if (CallPoint == INIT_RESUME) {
+ MemFS3GetCMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ } else {
+ S3GetCMsrDeviceRegisterList (Device, &RegisterHdr, StdHeader);
+ }
+
+ BootMode = S3_RESUME_MODE;
+ if (StdHeader->Func == AMD_INIT_POST) {
+ BootMode = RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE;
+ }
+
+ for (i = 0; i < RegisterHdr->NumRegisters; i++) {
+ if (((Device->Mask1 & RegisterHdr->RegisterList[i].Mask1) != 0) &&
+ ((Device->Mask2 & RegisterHdr->RegisterList[i].Mask2) != 0)) {
+ if ((RegisterHdr->RegisterList[i].BootMode == 0) || ((BootMode & RegisterHdr->RegisterList[i].BootMode) != 0)) {
+ // Do not restore the register if not in the right boot mode
+ // Pointer to the saved data buffer still needs to be adjusted as data will be saved regardless of boot mode
+ RegValueWrite = **OrMask;
+ if (RegisterHdr->RegisterList[i].Type.SpecialCaseFlag == 0) {
+ LibAmdMsrRead (RegisterHdr->RegisterList[i].Address, &RegValueRead, StdHeader);
+ RegValueWrite |= RegValueRead & (~RegisterHdr->RegisterList[i].AndMask);
+ LibAmdMsrWrite (RegisterHdr->RegisterList[i].Address, &RegValueWrite, StdHeader);
+ } else {
+ SpecialCaseIndex = RegisterHdr->RegisterList[i].Type.SpecialCaseIndex;
+ RegisterHdr->SpecialCases[SpecialCaseIndex].Save (RegisterHdr->RegisterList[i].Address,
+ &RegValueRead,
+ StdHeader);
+ RegValueWrite |= RegValueRead & (~RegisterHdr->RegisterList[i].AndMask);
+ RegisterHdr->SpecialCases[SpecialCaseIndex].Restore (RegisterHdr->RegisterList[i].Address,
+ &RegValueWrite,
+ StdHeader);
+ }
+ }
+ (*OrMask)++;
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Unique device ID to PCI register list translator.
+ *
+ * This translates the given device header in storage to the appropriate list
+ * of registers in the AGESA image.
+ *
+ * @param[out] NonMemoryRelatedDeviceList List of devices to save and restore
+ * during S3LateRestore.
+ * @param[in] StdHeader AMD standard header config param.
+ *
+ */
+VOID
+GetNonMemoryRelatedDeviceList (
+ OUT DEVICE_BLOCK_HEADER **NonMemoryRelatedDeviceList,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *NonMemoryRelatedDeviceList = NULL;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Unique device ID to PCI register list translator.
+ *
+ * This translates the given device header in storage to the appropriate list
+ * of registers in the AGESA image.
+ *
+ * @param[in] Device Device header containing the unique ID.
+ * @param[out] RegisterHdr Output PCI register list pointer.
+ * @param[in] StdHeader AMD standard header config param.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+S3GetPciDeviceRegisterList (
+ IN PCI_DEVICE_DESCRIPTOR *Device,
+ OUT PCI_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *RegisterHdr = NULL;
+ return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Unique device ID to 'conditional' PCI register list translator.
+ *
+ * This translates the given device header in storage to the appropriate list
+ * of registers in the AGESA image.
+ *
+ * @param[in] Device Device header containing the unique ID.
+ * @param[out] RegisterHdr Output 'conditional' PCI register list pointer.
+ * @param[in] StdHeader AMD standard header config param.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+S3GetCPciDeviceRegisterList (
+ IN CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+ OUT CPCI_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *RegisterHdr = NULL;
+ return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Unique device ID to MSR register list translator.
+ *
+ * This translates the given device header in storage to the appropriate list
+ * of registers in the AGESA image.
+ *
+ * @param[in] Device Device header containing the unique ID.
+ * @param[out] RegisterHdr Output MSR register list pointer.
+ * @param[in] StdHeader AMD standard header config param.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+S3GetMsrDeviceRegisterList (
+ IN MSR_DEVICE_DESCRIPTOR *Device,
+ OUT MSR_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *RegisterHdr = NULL;
+ return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Unique device ID to 'conditional' MSR register list translator.
+ *
+ * This translates the given device header in storage to the appropriate list
+ * of registers in the AGESA image.
+ *
+ * @param[in] Device Device header containing the unique ID.
+ * @param[out] RegisterHdr Output 'conditional' MSR register list pointer.
+ * @param[in] StdHeader AMD standard header config param.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+S3GetCMsrDeviceRegisterList (
+ IN CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+ OUT CMSR_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *RegisterHdr = NULL;
+ return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Constructor for the AMD_S3_PARAMS structure.
+ *
+ * This routine initializes failsafe values for the AMD_S3_PARAMS structure
+ * to be used by the AMD_INIT_RESUME, AMD_S3_SAVE, and AMD_S3LATE_RESTORE
+ * entry points.
+ *
+ * @param[in,out] S3Params Required input parameter for the AMD_S3_SAVE,
+ * AMD_INIT_RESUME, and AMD_S3_SAVE entry points.
+ *
+ */
+VOID
+AmdS3ParamsInitializer (
+ OUT AMD_S3_PARAMS *S3Params
+ )
+{
+ S3Params->Signature = 0x52545341;
+ S3Params->Version = 0x0000;
+ S3Params->VolatileStorage = NULL;
+ S3Params->VolatileStorageSize = 0x00000000;
+ S3Params->Flags = 0x00000000;
+ S3Params->NvStorage = NULL;
+ S3Params->NvStorageSize = 0x00000000;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/S3.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/S3.h
new file mode 100644
index 0000000..6f776d0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/S3.h
@@ -0,0 +1,399 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * ACPI S3 support definitions.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _S3_H_
+#define _S3_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+#define RESTART_FROM_BEGINNING_LIST 0xFFFFFFFFul
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+/* Device related definitions */
+
+/// Header at the beginning of a context save buffer.
+typedef struct {
+ UINT16 Version; ///< Version of header
+ UINT16 NumDevices; ///< Number of devices in the list
+ UINT16 RelativeOrMaskOffset; ///< Size of device list + header
+ UINT32 NextBlockOffset; ///< Size of the whole device save context
+} DEVICE_BLOCK_HEADER;
+
+/// S3 device types
+typedef enum {
+ DEV_TYPE_PCI_PRE_ESR, ///< PCI device before exiting self-refresh
+ DEV_TYPE_PCI, ///< PCI device after exiting self-refresh
+ DEV_TYPE_CPCI_PRE_ESR, ///< 'conditional' PCI device before exiting self-refresh
+ DEV_TYPE_CPCI, ///< 'conditional' PCI device after exiting self-refresh
+ DEV_TYPE_MSR_PRE_ESR, ///< MSR device before exiting self-refresh
+ DEV_TYPE_MSR, ///< MSR device after exiting self-refresh
+ DEV_TYPE_CMSR_PRE_ESR, ///< 'conditional' MSR device before exiting self-refresh
+ DEV_TYPE_CMSR ///< 'conditional' MSR device after exiting self-refresh
+} S3_DEVICE_TYPES;
+
+/// S3 restoration call points
+typedef enum {
+ INIT_RESUME, ///< AMD_INIT_RESUME
+ S3_LATE_RESTORE ///< AMD_S3LATE_RESTORE
+} CALL_POINTS;
+
+/// S3 device common header
+typedef struct {
+ UINT32 RegisterListID; ///< Unique ID of this device
+ UINT8 Type; ///< Appropriate S3_DEVICE_TYPES type
+} DEVICE_DESCRIPTOR;
+
+/// S3 PCI device header
+typedef struct {
+ UINT32 RegisterListID; ///< Unique ID of this device
+ UINT8 Type; ///< DEV_TYPE_PCI / DEV_TYPE_PCI_PRE_ESR
+ UINT8 Node; ///< Zero-based node number
+} PCI_DEVICE_DESCRIPTOR;
+
+/// S3 'conditional' PCI device header
+typedef struct {
+ UINT32 RegisterListID; ///< Unique ID of this device
+ UINT8 Type; ///< DEV_TYPE_CPCI / DEV_TYPE_CPCI_PRE_ESR
+ UINT8 Node; ///< Zero-based node number
+ UINT8 Mask1; ///< Conditional mask 1
+ UINT8 Mask2; ///< Conditional mask 2
+} CONDITIONAL_PCI_DEVICE_DESCRIPTOR;
+
+/// S3 MSR device header
+typedef struct {
+ UINT32 RegisterListID; ///< Unique ID of this device
+ UINT8 Type; ///< DEV_TYPE_MSR / DEV_TYPE_MSR_PRE_ESR
+} MSR_DEVICE_DESCRIPTOR;
+
+/// S3 'conditional' MSR device header
+typedef struct {
+ UINT32 RegisterListID; ///< Unique ID of this device
+ UINT8 Type; ///< DEV_TYPE_CMSR / DEV_TYPE_CMSR_PRE_ESR
+ UINT8 Mask1; ///< Conditional mask 1
+ UINT8 Mask2; ///< Conditional mask 2
+} CONDITIONAL_MSR_DEVICE_DESCRIPTOR;
+
+/* Special case related definitions */
+
+/**
+ * PCI special case save handler
+ *
+ * @param[in] AccessWidth 8, 16, or 32 bit wide access
+ * @param[in] Address full PCI address of the register to save
+ * @param[out] Value Value read from the register
+ * @param[in] ConfigPtr AMD standard header config parameter
+ *
+ */
+typedef VOID (*PF_S3_SPECIAL_PCI_SAVE) (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ OUT VOID *Value,
+ IN VOID *ConfigPtr
+ );
+
+/**
+ * PCI special case restore handler
+ *
+ * @param[in] AccessWidth 8, 16, or 32 bit wide access
+ * @param[in] Address full PCI address of the register to save
+ * @param[in] Value Value to write to the register
+ * @param[in] ConfigPtr AMD standard header config parameter
+ *
+ */
+typedef VOID (*PF_S3_SPECIAL_PCI_RESTORE) (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR PciAddress,
+ IN VOID *Value,
+ IN VOID *StdHeader
+ );
+
+/**
+ * MSR special case save handler
+ *
+ * @param[in] MsrAddress Address of model specific register to save
+ * @param[out] Value Value read from the register
+ * @param[in] ConfigPtr AMD standard header config parameter
+ *
+ */
+typedef VOID (*PF_S3_SPECIAL_MSR_SAVE) (
+ IN UINT32 MsrAddress,
+ OUT UINT64 *Value,
+ IN VOID *StdHeader
+ );
+
+/**
+ * MSR special case restore handler
+ *
+ * @param[in] MsrAddress Address of model specific register to restore
+ * @param[in] Value Value to write to the register
+ * @param[in] ConfigPtr AMD standard header config parameter
+ *
+ */
+typedef VOID (*PF_S3_SPECIAL_MSR_RESTORE) (
+ IN UINT32 MsrAddress,
+ IN UINT64 *Value,
+ IN VOID *StdHeader
+ );
+
+/// PCI special case save/restore structure.
+typedef struct {
+ PF_S3_SPECIAL_PCI_SAVE Save; ///< Save routine
+ PF_S3_SPECIAL_PCI_RESTORE Restore; ///< Restore routine
+} PCI_SPECIAL_CASE;
+
+/// MSR special case save/restore structure.
+typedef struct {
+ PF_S3_SPECIAL_MSR_SAVE Save; ///< Save routine
+ PF_S3_SPECIAL_MSR_RESTORE Restore; ///< Restore routine
+} MSR_SPECIAL_CASE;
+
+/* Register related definitions */
+/// S3 register type bit fields
+typedef struct {
+ UINT8 SpecialCaseIndex:4; ///< Special Case array index
+ UINT8 RegisterSize:3; ///< For PCI, 1 = byte, 2 = word, else = dword.
+ ///< For MSR, don't care
+ UINT8 SpecialCaseFlag:1; ///< Indicates special case
+} S3_REGISTER_TYPE;
+
+/// S3 PCI register descriptor.
+typedef struct {
+ S3_REGISTER_TYPE Type; ///< Type[7] = special case flag,
+ ///< Type[6:3] = register size in bytes,
+ ///< Type[2:0] = special case index
+ UINT8 Function; ///< PCI function of the register
+ UINT16 Offset; ///< PCI offset of the register
+ UINT32 AndMask; ///< AND mask to be applied to the value before saving
+ UINT8 BootMode; ///< Boot mode
+} PCI_REG_DESCRIPTOR;
+
+/// S3 'conditional' PCI register descriptor.
+typedef struct {
+ S3_REGISTER_TYPE Type; ///< Type[7] = special case flag,
+ ///< Type[6:3] = register size in bytes,
+ ///< Type[2:0] = special case index
+ UINT8 Function; ///< PCI function of the register
+ UINT16 Offset; ///< PCI offset of the register
+ UINT32 AndMask; ///< AND mask to be applied to the value before saving
+ UINT8 Mask1; ///< conditional mask 1
+ UINT8 Mask2; ///< conditional mask 2
+ UINT8 BootMode; ///< Boot mode
+} CONDITIONAL_PCI_REG_DESCRIPTOR;
+
+/// S3 MSR register descriptor.
+typedef struct {
+ S3_REGISTER_TYPE Type; ///< Type[7] = special case flag,
+ ///< Type[6:3] = reserved,
+ ///< Type[2:0] = special case index
+ UINT32 Address; ///< MSR address
+ UINT64 AndMask; ///< AND mask to be applied to the value before saving
+ UINT8 BootMode; ///< Boot mode
+} MSR_REG_DESCRIPTOR;
+
+/// S3 'conditional' MSR register descriptor.
+typedef struct {
+ S3_REGISTER_TYPE Type; ///< Type[7] = special case flag,
+ ///< Type[6:3] = reserved,
+ ///< Type[2:0] = special case index
+ UINT32 Address; ///< MSR address
+ UINT64 AndMask; ///< AND mask to be applied to the value before saving
+ UINT8 Mask1; ///< conditional mask 1
+ UINT8 Mask2; ///< conditional mask 2
+ UINT8 BootMode; ///< Boot mode
+} CONDITIONAL_MSR_REG_DESCRIPTOR;
+
+/// Common header at the beginning of an S3 register list.
+typedef struct {
+ UINT16 Version; ///< Version of header
+ UINT16 NumRegisters; ///< Number of registers in the list
+} REGISTER_BLOCK_HEADER;
+
+/// S3 PCI register list header.
+typedef struct {
+ UINT16 Version; ///< Version of header
+ UINT16 NumRegisters; ///< Number of registers in the list
+ PCI_REG_DESCRIPTOR *RegisterList; ///< Pointer to the first register descriptor
+ PCI_SPECIAL_CASE *SpecialCases; ///< Pointer to array of special case handlers
+} PCI_REGISTER_BLOCK_HEADER;
+
+/// S3 'conditional' PCI register list header.
+typedef struct {
+ UINT16 Version; ///< Version of header
+ UINT16 NumRegisters; ///< Number of registers in the list
+ CONDITIONAL_PCI_REG_DESCRIPTOR *RegisterList; ///< Pointer to the first register descriptor
+ PCI_SPECIAL_CASE *SpecialCases; ///< Pointer to array of special case handlers
+} CPCI_REGISTER_BLOCK_HEADER;
+
+/// S3 MSR register list header.
+typedef struct {
+ UINT16 Version; ///< Version of header
+ UINT16 NumRegisters; ///< Number of registers in the list
+ MSR_REG_DESCRIPTOR *RegisterList; ///< Pointer to the first register descriptor
+ MSR_SPECIAL_CASE *SpecialCases; ///< Pointer to array of special case handlers
+} MSR_REGISTER_BLOCK_HEADER;
+
+/// S3 'conditional' MSR register list header.
+typedef struct {
+ UINT16 Version; ///< Version of header
+ UINT16 NumRegisters; ///< Number of registers in the list
+ CONDITIONAL_MSR_REG_DESCRIPTOR *RegisterList; ///< Pointer to the first register descriptor
+ MSR_SPECIAL_CASE *SpecialCases; ///< Pointer to array of special case handlers
+} CMSR_REGISTER_BLOCK_HEADER;
+
+/// S3 device descriptor pointers for ease of proper pointer advancement.
+typedef union {
+ DEVICE_DESCRIPTOR *CommonDeviceHeader; ///< Common header
+ PCI_DEVICE_DESCRIPTOR *PciDevice; ///< PCI header
+ CONDITIONAL_PCI_DEVICE_DESCRIPTOR *CPciDevice; ///< 'conditional' PCI header
+ MSR_DEVICE_DESCRIPTOR *MsrDevice; ///< MSR header
+ CONDITIONAL_MSR_DEVICE_DESCRIPTOR *CMsrDevice; ///< 'conditional' MSR header
+} DEVICE_DESCRIPTORS;
+
+/// S3 register list header pointers for ease of proper pointer advancement.
+typedef union {
+ DEVICE_DESCRIPTOR *CommonDeviceHeader; ///< Common header
+ PCI_REGISTER_BLOCK_HEADER *PciRegisters; ///< PCI header
+ CPCI_REGISTER_BLOCK_HEADER *CPciRegisters; ///< 'conditional' PCI header
+ MSR_REGISTER_BLOCK_HEADER *MsrRegisters; ///< MSR header
+ CMSR_REGISTER_BLOCK_HEADER *CMsrRegisters; ///< 'conditional' MSR header
+} REGISTER_BLOCK_HEADERS;
+
+/// S3 Volatile Storage Header
+typedef struct {
+ UINT32 HeapOffset; ///< Offset to beginning of heap data
+ UINT32 HeapSize; ///< Size of the heap data
+ UINT32 RegisterDataOffset; ///< Offset to beginning of raw save data
+ UINT32 RegisterDataSize; ///< Size of raw save data
+} S3_VOLATILE_STORAGE_HEADER;
+
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+UINT32
+GetWorstCaseContextSize (
+ IN DEVICE_BLOCK_HEADER *DeviceList,
+ IN CALL_POINTS CallPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+SaveDeviceListContext (
+ IN DEVICE_BLOCK_HEADER *DeviceList,
+ IN VOID *Storage,
+ IN CALL_POINTS CallPoint,
+ OUT UINT32 *ActualBufferSize,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+RestorePreESRContext (
+ OUT VOID **OrMaskPtr,
+ IN VOID *Storage,
+ IN CALL_POINTS CallPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+RestorePostESRContext (
+ IN VOID *OrMaskPtr,
+ IN VOID *Storage,
+ IN CALL_POINTS CallPoint,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+AmdS3ParamsInitializer (
+ OUT AMD_S3_PARAMS *S3Params
+ );
+
+VOID
+GetNonMemoryRelatedDeviceList (
+ OUT DEVICE_BLOCK_HEADER **NonMemoryRelatedDeviceList,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+S3GetPciDeviceRegisterList (
+ IN PCI_DEVICE_DESCRIPTOR *Device,
+ OUT PCI_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+S3GetCPciDeviceRegisterList (
+ IN CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+ OUT CPCI_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+S3GetMsrDeviceRegisterList (
+ IN MSR_DEVICE_DESCRIPTOR *Device,
+ OUT MSR_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+S3GetCMsrDeviceRegisterList (
+ IN CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+ OUT CMSR_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+#endif // _S3_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Table.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Table.c
new file mode 100644
index 0000000..a27140b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Table.c
@@ -0,0 +1,927 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Register Table Related Functions
+ *
+ * Set registers according to a set of register tables
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 85962 $ @e \$Date: 2013-01-14 20:12:29 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "OptionMultiSocket.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Table.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuFeatures.h"
+#include "CommonReturns.h"
+#include "cpuL3Features.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_TABLE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+SetRegistersFromTablesBeforeApLaunch (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+SetRegistersFromTablesAfterApLaunch (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+extern CPU_FAMILY_SUPPORT_TABLE L3FeatureFamilyServiceTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * An iterator for all the Family and Model Register Tables.
+ *
+ * RegisterTableHandle should be set to NULL to begin iteration, the first time the method is
+ * invoked. Register tables can be processed, until this method returns NULL. RegisterTableHandle
+ * should simply be passed back to the method without modification or use by the caller.
+ * The table selector allows the relevant tables for different cores to be iterated, if the family separates
+ * tables. For example, MSRs can be in a table processed by all cores and PCI registers in a table processed by
+ * primary cores.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] Selector Select whether to iterate over tables for either all cores, primary cores, bsp, ....
+ * @param[in] TimePoint Time point designator
+ * @param[in,out] RegisterTableHandle IN: The handle of the current register table, or NULL if Begin.
+ * OUT: The handle of the next register table, if not End.
+ * @param[out] NumberOfEntries The number of entries in the table returned, if not End.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @return The pointer to the next Register Table, or NULL if End.
+ */
+TABLE_ENTRY_FIELDS
+STATIC
+*GetNextRegisterTable (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN TABLE_CORE_SELECTOR Selector,
+ IN UINT32 TimePoint,
+ IN OUT REGISTER_TABLE ***RegisterTableHandle,
+ OUT UINTN *NumberOfEntries,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ REGISTER_TABLE **NextTable;
+ TABLE_ENTRY_FIELDS *Entries;
+
+ ASSERT ((FamilySpecificServices != NULL) && (StdHeader != NULL));
+ ASSERT (Selector < TableCoreSelectorMax);
+
+ NextTable = *RegisterTableHandle;
+ if (NextTable == NULL) {
+ // Begin
+ NextTable = FamilySpecificServices->RegisterTableList;
+ IDS_OPTION_HOOK (IDS_TRAP_TABLE, &NextTable, StdHeader);
+ } else {
+ NextTable++;
+ }
+ // skip if not selected
+ while ((*NextTable != NULL) && (((*NextTable)->Selector != Selector) || (((*NextTable)->TimePoint & TimePoint) == 0))) {
+ NextTable++;
+ }
+ if (*NextTable == NULL) {
+ // End
+ *RegisterTableHandle = NULL;
+ Entries = NULL;
+ } else {
+ // Iterate next table
+ *RegisterTableHandle = NextTable;
+ *NumberOfEntries = (*NextTable)->NumberOfEntries;
+ Entries = (TABLE_ENTRY_FIELDS *) (*NextTable)->Table;
+ }
+ return Entries;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Compare counts to a pair of ranges.
+ *
+ * @param[in] FirstCount The actual count to be compared to the first range.
+ * @param[in] SecondCount The actual count to be compared to the second range.
+ * @param[in] Ranges The ranges which the counts are compared to.
+ *
+ * @retval TRUE Either one, or both, of the counts is in the range given.
+ * @retval FALSE Neither count is in the range given.
+ */
+BOOLEAN
+IsEitherCountInRange (
+ IN UINTN FirstCount,
+ IN UINTN SecondCount,
+ IN COUNT_RANGE_FEATURE Ranges
+ )
+{
+ // Errors: Entire Range value is zero, Min and Max reversed or not <=, ranges overlap (OK if first range is all),
+ // the real counts are too big.
+ ASSERT ((Ranges.Range0Min <= Ranges.Range0Max) &&
+ (Ranges.Range1Min <= Ranges.Range1Max) &&
+ (Ranges.Range0Max != 0) &&
+ (Ranges.Range1Max != 0) &&
+ ((Ranges.Range0Max == COUNT_RANGE_HIGH) || (Ranges.Range0Max < Ranges.Range1Min)) &&
+ ((FirstCount < COUNT_RANGE_HIGH) && (SecondCount < COUNT_RANGE_HIGH)));
+
+ return (BOOLEAN) (((FirstCount <= Ranges.Range0Max) && (FirstCount >= Ranges.Range0Min)) ||
+ ((SecondCount <= Ranges.Range1Max) && (SecondCount >= Ranges.Range1Min)));
+}
+
+/*-------------------------------------------------------------------------------------*/
+/**
+ * Returns the performance profile features list of the currently running processor core.
+ *
+ * @param[out] Features The performance profile features supported by this platform
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in] StdHeader Header for library and services
+ *
+ */
+VOID
+GetPerformanceFeatures (
+ OUT PERFORMANCE_PROFILE_FEATS *Features,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPUID_DATA CpuidDataStruct;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ L3_FEATURE_FAMILY_SERVICES *FeatureFamilyServices;
+
+ Features->PerformanceProfileValue = 0;
+ // Reflect Probe Filter Configuration.
+ Features->PerformanceProfileFeatures.ProbeFilter = 0;
+ if (IsFeatureEnabled (L3Features, PlatformConfig, StdHeader)) {
+ GetFeatureServicesOfCurrentCore (&L3FeatureFamilyServiceTable, (CONST VOID **)&FeatureFamilyServices, StdHeader);
+ if ((FeatureFamilyServices != NULL) &&
+ (FeatureFamilyServices->IsHtAssistSupported (FeatureFamilyServices, PlatformConfig, StdHeader))) {
+ Features->PerformanceProfileFeatures.ProbeFilter = 1;
+ }
+ }
+
+ // Reflect Display Refresh Requests use 32 bytes Configuration.
+ Features->PerformanceProfileFeatures.RefreshRequest32Byte = 0;
+ if (PlatformConfig->PlatformProfile.Use32ByteRefresh) {
+ Features->PerformanceProfileFeatures.RefreshRequest32Byte = 1;
+ }
+ // Reflect Mct Isoc Read Priority set to variable Configuration.
+ Features->PerformanceProfileFeatures.MctIsocVariable = 0;
+ if (PlatformConfig->PlatformProfile.UseVariableMctIsocPriority) {
+ Features->PerformanceProfileFeatures.MctIsocVariable = 1;
+ }
+ // Indicate if this boot is a warm reset.
+ Features->PerformanceProfileFeatures.IsWarmReset = 0;
+ if (IsWarmReset (StdHeader)) {
+ Features->PerformanceProfileFeatures.IsWarmReset = 1;
+ }
+
+ // Get L3 Cache present as indicated by CPUID
+ Features->PerformanceProfileFeatures.L3Cache = 0;
+ Features->PerformanceProfileFeatures.NoL3Cache = 1;
+ LibAmdCpuidRead (AMD_CPUID_L2L3Cache_L2TLB, &CpuidDataStruct, StdHeader);
+ if (((CpuidDataStruct.EDX_Reg & 0xFFFC0000) >> 18) != 0) {
+ Features->PerformanceProfileFeatures.L3Cache = 1;
+ Features->PerformanceProfileFeatures.NoL3Cache = 0;
+ }
+
+ // Get VRM select high speed from build option.
+ Features->PerformanceProfileFeatures.VrmHighSpeed = 0;
+ if (PlatformConfig->VrmProperties[CoreVrm].HiSpeedEnable) {
+ Features->PerformanceProfileFeatures.VrmHighSpeed = 1;
+ }
+
+ // Get some family, model specific performance type info.
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ ASSERT (FamilySpecificServices != NULL);
+
+ // Is the Northbridge P-State feature enabled
+ Features->PerformanceProfileFeatures.NbPstates = 0;
+ if (FamilySpecificServices->IsNbPstateEnabled (FamilySpecificServices, PlatformConfig, StdHeader)) {
+ Features->PerformanceProfileFeatures.NbPstates = 1;
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the MSR Register Entry.
+ *
+ * @TableEntryTypeMethod{::MsrRegister}.
+ *
+ * Read - Modify - Write the MSR, clearing masked bits, and setting the data bits.
+ *
+ * @param[in] Entry The MSR register entry to perform
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForMsrEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 MsrData;
+
+ // Even for only single bit fields, use those in the mask. "Mask nothing" is a bug, even if just by policy.
+ ASSERT (Entry->MsrEntry.Mask != 0);
+
+ LibAmdMsrRead (Entry->MsrEntry.Address, &MsrData, StdHeader);
+ MsrData = MsrData & (~(Entry->MsrEntry.Mask));
+ MsrData = MsrData | Entry->MsrEntry.Data;
+ LibAmdMsrWrite (Entry->MsrEntry.Address, &MsrData, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::PciRegister}.
+ *
+ * Make the current core's PCI address with the function and register for the entry.
+ * Read - Modify - Write the PCI register, clearing masked bits, and setting the data bits.
+ *
+ * @param[in] Entry The PCI register entry to perform
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForPciEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 TempVar32_a;
+ UINT32 MySocket;
+ UINT32 MyModule;
+ UINT32 Ignored;
+ PCI_ADDR MyPciAddress;
+ AGESA_STATUS IgnoredSts;
+ TABLE_ENTRY_DATA PciEntry;
+
+ // Errors: Possible values in unused entry space, extra type features, value range checks.
+ // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+ // Even for only single bit fields, use those in the mask. "Mask nothing" is a bug, even if just by policy.
+ ASSERT ((Entry->InitialValues[4] == 0) &&
+ (Entry->InitialValues[3] == 0) &&
+ (Entry->PciEntry.Mask != 0));
+
+ LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+ PciEntry.PciEntry = Entry->PciEntry;
+
+ IDS_OPTION_HOOK (IDS_SET_PCI_REGISTER_ENTRY, &PciEntry, StdHeader);
+
+ IdentifyCore (StdHeader, &MySocket, &MyModule, &Ignored, &IgnoredSts);
+ GetPciAddress (StdHeader, MySocket, MyModule, &MyPciAddress, &IgnoredSts);
+ MyPciAddress.Address.Function = PciEntry.PciEntry.Address.Address.Function;
+ MyPciAddress.Address.Register = PciEntry.PciEntry.Address.Address.Register;
+ LibAmdPciRead (AccessWidth32, MyPciAddress, &TempVar32_a, StdHeader);
+ TempVar32_a = TempVar32_a & (~(PciEntry.PciEntry.Mask));
+ TempVar32_a = TempVar32_a | PciEntry.PciEntry.Data;
+ LibAmdPciWrite (AccessWidth32, MyPciAddress, &TempVar32_a, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Family Specific Workaround Register Entry.
+ *
+ * @TableEntryTypeMethod{::FamSpecificWorkaround}.
+ *
+ * Call the function, passing the data.
+ *
+ * See if you can use the other entries or make an entry that covers the fix.
+ * After all, the purpose of having a table entry is to @b NOT have code which
+ * isn't generic feature code, but is family/model code specific to one case.
+ *
+ * @param[in] Entry The Family Specific Workaround register entry to perform
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForFamSpecificWorkaroundEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ ASSERT (Entry->FamSpecificEntry.DoAction != NULL);
+
+ Entry->FamSpecificEntry.DoAction (Entry->FamSpecificEntry.Data, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Performance Profile PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::ProfileFixup}.
+ *
+ * Check the entry's performance profile features to the platform's and do the
+ * PCI register entry if they match.
+ *
+ * @param[in] Entry The Performance Profile register entry to perform
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForPerformanceProfileEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PERFORMANCE_PROFILE_FEATS PlatformProfile;
+ TABLE_ENTRY_DATA PciEntry;
+
+ // Errors: Possible values in unused entry space, extra type features, value range checks.
+ // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+ ASSERT (((Entry->TokenPciEntry.TypeFeats.PerformanceProfileValue & ~((PERFORMANCE_PROFILE_ALL) | (PERFORMANCE_AND))) == 0) &&
+ (Entry->InitialValues[4] == 0));
+
+ GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader);
+ if (DoesEntryTypeSpecificInfoMatch (PlatformProfile.PerformanceProfileValue,
+ Entry->FixupEntry.TypeFeats.PerformanceProfileValue)) {
+ LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+ PciEntry.PciEntry = Entry->FixupEntry.PciEntry;
+ SetRegisterForPciEntry (&PciEntry, PlatformConfig, StdHeader);
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Core Counts Performance PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::CoreCountsPciRegister}.
+ *
+ * Check the performance profile.
+ * Check the actual core count to the range pair given, and apply if matched.
+ *
+ * @param[in] Entry The PCI register entry to perform
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForCoreCountsPerformanceEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PERFORMANCE_PROFILE_FEATS PlatformProfile;
+ UINTN ActualCoreCount;
+ TABLE_ENTRY_DATA PciEntry;
+
+ // Errors: Possible values in unused entry space, extra type features, value range checks.
+ // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+ ASSERT (((Entry->CoreCountEntry.TypeFeats.PerformanceProfileValue & ~((PERFORMANCE_PROFILE_ALL) | (PERFORMANCE_AND))) == 0));
+
+ GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader);
+ if (DoesEntryTypeSpecificInfoMatch (PlatformProfile.PerformanceProfileValue, Entry->CoreCountEntry.TypeFeats.PerformanceProfileValue)) {
+ ActualCoreCount = GetActiveCoresInCurrentModule (StdHeader);
+ // Check if the actual core count is in either range.
+ if (IsEitherCountInRange (ActualCoreCount, ActualCoreCount, Entry->CoreCountEntry.CoreCounts.CoreRanges)) {
+ LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+ PciEntry.PciEntry = Entry->CoreCountEntry.PciEntry;
+ SetRegisterForPciEntry (&PciEntry, PlatformConfig, StdHeader);
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Processor Counts PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::ProcCountsPciRegister}.
+ *
+ * Check the performance profile.
+ * Check the actual processor count (not node count!) to the range pair given, and apply if matched.
+ *
+ * @param[in] Entry The PCI register entry to perform
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForProcessorCountsEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PERFORMANCE_PROFILE_FEATS PlatformProfile;
+ UINTN ProcessorCount;
+ TABLE_ENTRY_DATA PciEntry;
+
+ // Errors: Possible values in unused entry space, extra type features, value range checks.
+ // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+ ASSERT (((Entry->ProcCountEntry.TypeFeats.PerformanceProfileValue & ~((PERFORMANCE_PROFILE_ALL) | (PERFORMANCE_AND))) == 0));
+
+ GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader);
+ if (DoesEntryTypeSpecificInfoMatch (PlatformProfile.PerformanceProfileValue, Entry->ProcCountEntry.TypeFeats.PerformanceProfileValue)) {
+ ProcessorCount = GetNumberOfProcessors (StdHeader);
+ // Check if the actual processor count is in either range.
+ if (IsEitherCountInRange (ProcessorCount, ProcessorCount, Entry->ProcCountEntry.ProcessorCounts.ProcessorCountRanges)) {
+ LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+ PciEntry.PciEntry = Entry->ProcCountEntry.PciEntry;
+ SetRegisterForPciEntry (&PciEntry, PlatformConfig, StdHeader);
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Compute Unit Counts PCI Register Entry.
+ *
+ * @TableEntryTypeMethod{::CompUnitCountsPciRegister}.
+ *
+ * Check the entry's performance profile features and the compute unit count
+ * to the platform's and do the PCI register entry if they match.
+ *
+ * @param[in] Entry The PCI register entry to perform
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetRegisterForComputeUnitCountsEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PERFORMANCE_PROFILE_FEATS PlatformProfile;
+ UINTN ComputeUnitCount;
+ TABLE_ENTRY_DATA PciEntry;
+
+ // Errors: Possible values in unused entry space, extra type features, value range checks.
+ // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry.
+ ASSERT (((Entry->CompUnitCountEntry.TypeFeats.PerformanceProfileValue & ~((PERFORMANCE_PROFILE_ALL) | (PERFORMANCE_AND))) == 0));
+
+ GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader);
+ if (DoesEntryTypeSpecificInfoMatch (PlatformProfile.PerformanceProfileValue, Entry->CompUnitCountEntry.TypeFeats.PerformanceProfileValue)) {
+ ComputeUnitCount = GetNumberOfCompUnitsInCurrentModule (StdHeader);
+ // Check if the actual compute unit count is in either range.
+ if (IsEitherCountInRange (ComputeUnitCount, ComputeUnitCount, Entry->CompUnitCountEntry.ComputeUnitCounts.ComputeUnitRanges)) {
+ LibAmdMemFill (&PciEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+ PciEntry.PciEntry = Entry->CompUnitCountEntry.PciEntry;
+ SetRegisterForPciEntry (&PciEntry, PlatformConfig, StdHeader);
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the Compute Unit Counts MSR Register Entry.
+ *
+ * @TableEntryTypeMethod{::CompUnitCountsMsr}.
+ *
+ * Check the entry's compute unit count to the platform's and do the
+ * MSR entry if they match.
+ *
+ * @param[in] Entry The PCI register entry to perform
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetMsrForComputeUnitCountsEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINTN ComputeUnitCount;
+ TABLE_ENTRY_DATA MsrEntry;
+
+ ComputeUnitCount = GetNumberOfCompUnitsInCurrentModule (StdHeader);
+ // Check if the actual compute unit count is in either range.
+ if (IsEitherCountInRange (ComputeUnitCount, ComputeUnitCount, Entry->CompUnitCountMsrEntry.ComputeUnitCounts.ComputeUnitRanges)) {
+ LibAmdMemFill (&MsrEntry, 0, sizeof (TABLE_ENTRY_DATA), StdHeader);
+ MsrEntry.MsrEntry = Entry->CompUnitCountMsrEntry.MsrEntry;
+ SetRegisterForMsrEntry (&MsrEntry, PlatformConfig, StdHeader);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * Returns the platform features list of the currently running processor core.
+ *
+ * @param[out] Features The Features supported by this platform
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in] StdHeader Header for library and services
+ *
+ */
+VOID
+GetPlatformFeatures (
+ OUT PLATFORM_FEATS *Features,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+ UINT32 CapabilityReg;
+ UINT32 Link;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ UINT32 CoreCount;
+
+ // Start with none.
+ Features->PlatformValue = 0;
+
+ switch (PlatformConfig->PlatformProfile.PlatformControlFlowMode) {
+ case Nfcm:
+ Features->PlatformFeatures.PlatformNfcm = 1;
+ break;
+ case UmaDr:
+ Features->PlatformFeatures.PlatformUma = 1;
+ break;
+ case UmaIfcm:
+ Features->PlatformFeatures.PlatformUmaIfcm = 1;
+ break;
+ case Ifcm:
+ Features->PlatformFeatures.PlatformIfcm = 1;
+ break;
+ case Iommu:
+ Features->PlatformFeatures.PlatformIommu = 1;
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ // Check - Single Link?
+ // This is based on the implemented links on the package regardless of their
+ // connection status. All processors must match the BSP, so we only check it and
+ // not the current node. We don't care exactly how many links there are, as soon
+ // as we find more than one we are done.
+ Link = 0;
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, PCI_DEV_BASE, FUNC_0, 0);
+ // Until either all capabilities are done or until the desired link is found,
+ // keep looking for HT Host Capabilities.
+ while (Link < 2) {
+ LibAmdPciFindNextCap (&PciAddress, StdHeader);
+ if (PciAddress.AddressValue != ILLEGAL_SBDFO) {
+ LibAmdPciRead (AccessWidth32, PciAddress, &CapabilityReg, StdHeader);
+ if ((CapabilityReg & 0xE00000FF) == 0x20000008) {
+ Link++;
+ }
+ // A capability other than an HT capability, keep looking.
+ } else {
+ // end of capabilities
+ break;
+ }
+ }
+ if (Link < 2) {
+ Features->PlatformFeatures.PlatformSingleLink = 1;
+ } else {
+ Features->PlatformFeatures.PlatformMultiLink = 1;
+ }
+
+ // Set the legacy core count bits.
+ GetActiveCoresInCurrentSocket (&CoreCount, StdHeader);
+ switch (CoreCount) {
+ case 1:
+ Features->PlatformFeatures.PlatformSingleCore = 1;
+ break;
+ case 2:
+ Features->PlatformFeatures.PlatformDualCore = 1;
+ break;
+ default:
+ Features->PlatformFeatures.PlatformMultiCore = 1;
+ }
+
+ //
+ // Get some specific platform type info, VC...etc.
+ //
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ ASSERT (FamilySpecificServices != NULL);
+ FamilySpecificServices->GetPlatformTypeSpecificInfo (FamilySpecificServices, Features, StdHeader);
+
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Checks if a register table entry applies to the executing core.
+ *
+ * This function uses a combination of logical ID and platform features to
+ * determine whether or not a register table entry applies to the executing core.
+ *
+ * @param[in] CoreCpuRevision The current core's logical ID
+ * @param[in] EntryCpuRevision The entry's desired logical IDs
+ * @param[in] PlatformFeatures The platform features
+ * @param[in] EntryFeatures The entry's desired platform features
+ *
+ * @retval TRUE This entry should be applied
+ * @retval FALSE This entry does not apply
+ *
+ */
+BOOLEAN
+STATIC
+DoesEntryMatchPlatform (
+ IN CPU_LOGICAL_ID CoreCpuRevision,
+ IN CPU_LOGICAL_ID EntryCpuRevision,
+ IN PLATFORM_FEATS PlatformFeatures,
+ IN PLATFORM_FEATS EntryFeatures
+ )
+{
+ BOOLEAN Result;
+
+ Result = FALSE;
+
+ if (((CoreCpuRevision.Family & EntryCpuRevision.Family) != 0) &&
+ ((CoreCpuRevision.Revision & EntryCpuRevision.Revision) != 0)) {
+ if (EntryFeatures.PlatformFeatures.AndPlatformFeats == 0) {
+ // Match if ANY entry feats match a platform feat (an OR test)
+ if ((EntryFeatures.PlatformValue & PlatformFeatures.PlatformValue) != 0) {
+ Result = TRUE;
+ }
+ } else {
+ // Match if ALL entry feats match a platform feat (an AND test)
+ if ((EntryFeatures.PlatformValue & ~(AMD_PF_AND)) ==
+ (EntryFeatures.PlatformValue & PlatformFeatures.PlatformValue)) {
+ Result = TRUE;
+ }
+ }
+ }
+
+ return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Checks register table entry type specific criteria to the platform.
+ *
+ * Entry Data Type implementer methods can use this generically to check their own
+ * specific criteria. The method collects the actual platform characteristics and
+ * provides them along with the table entry's criteria to this service.
+ *
+ * There are a couple considerations for any implementer method using this service.
+ * The criteria value has to be representable as a UINT32. The MSB, Bit 31, has to
+ * be used as a AND test request if set in the entry. (The platform value should never
+ * have that bit set.)
+ *
+ * @param[in] PlatformTypeSpecificFeatures The platform features
+ * @param[in] EntryTypeFeatures The entry's desired platform features
+ *
+ * @retval TRUE This entry should be applied
+ * @retval FALSE This entry does not apply
+ *
+ */
+BOOLEAN
+DoesEntryTypeSpecificInfoMatch (
+ IN UINT32 PlatformTypeSpecificFeatures,
+ IN UINT32 EntryTypeFeatures
+ )
+{
+ BOOLEAN Result;
+
+ Result = FALSE;
+
+ if ((EntryTypeFeatures & BIT31) == 0) {
+ // Match if ANY entry feats match a platform feat (an OR test)
+ if ((EntryTypeFeatures & PlatformTypeSpecificFeatures) != 0) {
+ Result = TRUE;
+ }
+ } else {
+ // Match if ALL entry feats match a platform feat (an AND test)
+ if ((EntryTypeFeatures & ~(BIT31)) == (EntryTypeFeatures & PlatformTypeSpecificFeatures)) {
+ Result = TRUE;
+ }
+ }
+ return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determine this core's Selector matches.
+ *
+ * @param[in] Selector Is the current core this selector type?
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ * @retval TRUE Yes, it is.
+ * @retval FALSE No, it is not.
+ */
+BOOLEAN
+STATIC
+IsCoreSelector (
+ IN TABLE_CORE_SELECTOR Selector,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BOOLEAN Result;
+ AGESA_STATUS CalledStatus;
+
+ Result = TRUE;
+ ASSERT (Selector < TableCoreSelectorMax);
+
+ if ((Selector == PrimaryCores) && !IsCurrentCorePrimary (StdHeader)) {
+ Result = FALSE;
+ }
+ if ((Selector == ComputeUnitPrimary) && !IsCoreComputeUnitPrimary (FirstCoreIsComputeUnitPrimary, StdHeader)) {
+ Result = FALSE;
+ }
+ if ((Selector == BscCore) && (!IsBsp (StdHeader, &CalledStatus))) {
+ Result = FALSE;
+ }
+ return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set the registers for this core based on entries in a list of Register Tables.
+ *
+ * Determine the platform features and this core's logical id. Get the specific table
+ * entry type implementations for the logical model, which may be either generic (the ones
+ * in this file) or specific.
+ *
+ * Scan the tables starting the with ones for all cores and progressively narrowing the selection
+ * based on this core's role (ex. primary core). For a selected table, check for each entry
+ * matching the current core and platform, and call the implementer method to perform the
+ * register set operation if it matches.
+ *
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in] TimePoint Time point designator
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetRegistersFromTables (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN UINT32 TimePoint,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPU_LOGICAL_ID CpuLogicalId;
+ PLATFORM_FEATS PlatformFeatures;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ TABLE_ENTRY_FIELDS *Entries;
+ TABLE_CORE_SELECTOR Selector;
+ TABLE_ENTRY_TYPE EntryType;
+ REGISTER_TABLE **TableHandle;
+ UINTN NumberOfEntries;
+ UINTN CurrentEntryCount;
+ TABLE_ENTRY_TYPE_DESCRIPTOR *TypeImplementer;
+ PF_DO_TABLE_ENTRY DoTableEntry[TableEntryTypeMax];
+
+ // Did you really mean to increase the size of ALL table entries??!!
+ // While it is not necessarily a bug to increase the size of table entries:
+ // - Is this warning a surprise? Please fix it.
+ // - If expected, is this really a feature which is worth the increase? Then let other entries also use the space.
+ ASSERT (sizeof (TABLE_ENTRY_DATA) == (MAX_ENTRY_TYPE_ITEMS32 * sizeof (UINT32)));
+
+ PlatformFeatures.PlatformValue = 0;
+ GetLogicalIdOfCurrentCore (&CpuLogicalId, StdHeader);
+ GetPlatformFeatures (&PlatformFeatures, PlatformConfig, StdHeader);
+ GetCpuServicesFromLogicalId (&CpuLogicalId, (CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+ // Build a non-sparse table of implementer methods, so we don't have to keep searching.
+ // It is a bug to not include a descriptor for a type that is in the table (but the
+ // descriptor can point to a non-assert stub).
+ // Also, it is not a bug to have no register table implementations, but it is a bug to have none and call this routine.
+ for (EntryType = MsrRegister; EntryType < TableEntryTypeMax; EntryType++) {
+ DoTableEntry[EntryType] = (PF_DO_TABLE_ENTRY)CommonAssert;
+ }
+ TypeImplementer = FamilySpecificServices->TableEntryTypeDescriptors;
+ ASSERT (TypeImplementer != NULL);
+ while (TypeImplementer->EntryType < TableEntryTypeMax) {
+ DoTableEntry[TypeImplementer->EntryType] = TypeImplementer->DoTableEntry;
+ TypeImplementer++;
+ }
+
+ for (Selector = AllCores; Selector < TableCoreSelectorMax; Selector++) {
+ if (IsCoreSelector (Selector, StdHeader)) {
+ // If the current core is the selected type of core, work the table list for tables for that type of core.
+ TableHandle = NULL;
+ Entries = GetNextRegisterTable (FamilySpecificServices, Selector, TimePoint, &TableHandle, &NumberOfEntries, StdHeader);
+ while (Entries != NULL) {
+ for (CurrentEntryCount = 0; CurrentEntryCount < NumberOfEntries; CurrentEntryCount++, Entries++) {
+ if (DoesEntryMatchPlatform (CpuLogicalId, Entries->CpuRevision, PlatformFeatures, Entries->Features)) {
+ // The entry matches this config, Do It!
+ // Find the implementer for this entry type and pass the entry data to it.
+ ASSERT (Entries->EntryType < TableEntryTypeMax);
+ DoTableEntry[Entries->EntryType] (&Entries->Entry, PlatformConfig, StdHeader);
+ }
+ }
+ Entries = GetNextRegisterTable (FamilySpecificServices, Selector, TimePoint, &TableHandle, &NumberOfEntries, StdHeader);
+ }
+ } else {
+ // Once a selector does not match the current core, quit looking.
+ break;
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set the registers for this core based on entries in a list of Register Tables.
+ *
+ * This function acts as a wrapper for calling the SetRegistersFromTables
+ * routine at AmdInitEarly.
+ *
+ * @param[in] FamilyServices The current Family Specific Services.
+ * @param[in] EarlyParams Service parameters.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetRegistersFromTablesBeforeApLaunch (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_TESTPOINT (TpProcCpuProcessRegisterTables, StdHeader);
+ SetRegistersFromTables (&EarlyParams->PlatformConfig, PERFORM_TP_BEFORE_AP_LAUNCH, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Set the registers for this core based on entries in a list of Register Tables.
+ *
+ * This function acts as a wrapper for calling the SetRegistersFromTables
+ * routine at AmdInitEarly.
+ *
+ * @param[in] FamilyServices The current Family Specific Services.
+ * @param[in] EarlyParams Service parameters.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+SetRegistersFromTablesAfterApLaunch (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_TESTPOINT (TpProcCpuProcessRegisterTables, StdHeader);
+ SetRegistersFromTables (&EarlyParams->PlatformConfig, PERFORM_TP_AFTER_AP_LAUNCH, StdHeader);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Table.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Table.h
new file mode 100644
index 0000000..1f6341a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/Table.h
@@ -0,0 +1,1314 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Register Table Related Functions
+ *
+ * Contains code to initialize the CPU MSRs and PCI registers with BKDG recommended values
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 85962 $ @e \$Date: 2013-01-14 20:12:29 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_TABLE_H_
+#define _CPU_TABLE_H_
+
+#define MAX_ENTRY_TYPE_ITEMS32 6 // The maximum number of initializer items for UINT32 entry data types.
+
+/**
+ * @page regtableimpl Register Table Implementation Guide
+ *
+ * This register table implementation is modular and extensible, so that support code as
+ * well as table data can be family specific or built out if not needed, and new types
+ * of table entries can be added with low overhead. Because many aspects are now generic,
+ * there can be common implementations for CPU revision and platform feature matching and for
+ * finding and iterating tables.
+ *
+ * @par Adding a new table entry type.
+ *
+ * To add a new table entry type follow these steps.
+ * <ul>
+ * <li> Add a member to the enum TABLE_ENTRY_TYPE which is a descriptive name of the entry's purpose
+ * or distinct characteristics.
+ *
+ * <li> Create an entry data struct with the customized data needed. For example, custom register designations,
+ * data and mask sizes, or feature comparisons. Name your struct by adding "_" and upper-casing the enum name
+ * and adding "_TYPE_ENTRY_DATA" at the end.
+ *
+ * <li> Add the entry data type as a member of the TABLE_ENTRY_DATA union. Be aware of the size of your
+ * entry data struct; all table entries in all tables will share any size increase you introduce!
+ *
+ * <li> If your data entry contains any member types except for UINT32, you can't use the generic first union member
+ * for the initializers that make up the actual tables (it's just UINT32's). The generic MSR entry is
+ * an example. Follow the steps below:
+ *
+ * <ul>
+ * <li> Make a union which has your entry data type as the first member. Use TABLE_ENTRY_DATA as the
+ * second member. Name this with your register followed by "_DATA_INITIALIZER".
+ *
+ * <li> Make a copy of TABLE_ENTRY_FIELDS, and rename it your register "_TYPE_ENTRY_INITIALIZER". Rename
+ * the TABLE_ENTRY_DATA member of that struct to have the type you created in the previous step.
+ * This type can be used to declare an array of entries and make a register table in some family specific
+ * file.
+ * </ul>
+ *
+ * <li> Add the descriptor that will link table entries of your data type to an implementation for it.
+ * <ul>
+ * <li> Find the options file which instantiates the CPU_SPECIFIC_SERVICES for each logical model that will
+ * support the new entry type.
+ *
+ * <li> From there find the instantiation of its TABLE_ENTRY_TYPE_DESCRIPTOR. Add a descriptor to the
+ * to the list for your new type. Provide the name of a function which will implement the
+ * entry data. The function name should reflect that it implements the action for the entry type.
+ * The function must be an instance of F_DO_TABLE_ENTRY.
+ * </ul>
+ *
+ * <li> Implement the function for your entry type data. (If parts of it are family specific add methods to
+ * CPU_SPECIFIC_SERVICES for that and implement them for each family or model required.) @n
+ * The definition of the function must conform to F_DO_TABLE_ENTRY.
+ * In the function preamble, include a cross reference to the entry enum:
+ * @code
+ * *
+ * * @TableEntryTypeMethod{::MyRegister}
+ * *
+ * @endcode
+ *
+ * </ul>
+ *
+ * @par Adding a new Register Table
+ *
+ * To add a new register table for a logical CPU model follow the steps below.
+ *
+ * <ul>
+ * <li> Find the options file which instantiates the CPU_SPECIFIC_SERVICES for the logical model that
+ * should include the table.
+ *
+ * <li> From there find the instantiation of its REGISTER_TABLE list. Add the name of the new register table.
+ * </ul>
+ *
+ */
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * Define the supported table entries.
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * These are the available types of table entries.
+ *
+ * Each type corresponds to:
+ * - a semantics for the type specific data, for example semantics for a Register value,
+ * Data value, and Mask value.
+ * - optionally, including a method for type specific matching criteria
+ * - a method for writing the desired update to the hardware.
+ *
+ * All types share in common a method to match CPU Family and Model and a method to match
+ * platform feature set.
+ *
+ */
+typedef enum {
+ MsrRegister, ///< Processor MSR registers.
+ PciRegister, ///< Processor Config Space registers.
+ FamSpecificWorkaround, ///< Processor Family Specific Workarounds which are @b not practical using the other types.
+ HtPhyRegister, ///< Processor HT Phy registers.
+ HtPhyRangeRegister, ///< Processor HT Phy range of contiguous registers (ex. 40h:48h).
+ DeemphasisRegister, ///< Processor Deemphasis register (HT Phy special case).
+ HtPhyFreqRegister, ///< Processor Frequency dependent HT Phy settings.
+ ProfileFixup, ///< Processor Performance Profile fixups to PCI Config Registers.
+ HtHostPciRegister, ///< Processor Ht Host capability registers (PCI Config).
+ HtHostPerfPciRegister, ///< Processor Ht Host capability registers which depend on performance features.
+ HtTokenPciRegister, ///< Processor Ht Link Token count registers.
+ CoreCountsPciRegister, ///< Processor PCI Config Registers which depend on core counts.
+ ProcCountsPciRegister, ///< Processor PCI Config Registers which depend on processor counts.
+ CompUnitCountsPciRegister, ///< Processor PCI Config Registers which depend on compute unit counts.
+ TokenPciRegister, ///< Processor northbridge Token Count register which may be dependent on connectivity.
+ HtFeatPciRegister, ///< Processor HT Link feature dependant PCI Config Registers.
+ HtPhyProfileRegister, ///< Processor HT Phy registers which depend on performance features.
+ HtLinkPciRegister, ///< Processor HT Link registers (one per link) not part of HT Host capability.
+ CompUnitCountsMsr, ///< Processor MSRs which depend on compute unit counts.
+ TableEntryTypeMax ///< Not a valid entry type, use for limit checking.
+} TABLE_ENTRY_TYPE;
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * Useful types and defines: Selectors, Platform Features, and type specific features.
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * Select tables for the current core.
+ *
+ * This allows more efficient register table processing, by allowing cores to skip
+ * redundantly setting PCI registers, for example. This feature is not intended to
+ * be relied on for function: it is valid to have a single register table with all settings
+ * processed by every core; it's just slower.
+ *
+ */
+typedef enum {
+ AllCores, ///< Select only tables which apply to all cores.
+ ComputeUnitPrimary, ///< Select tables which apply to the primary core of a compute unit (SharedC, SharedNc).
+ PrimaryCores, ///< Select tables which apply to primary cores.
+ BscCore, ///< Select tables which apply to the boot core.
+ TableCoreSelectorMax ///< Not a valid selector, use for limit checking.
+} TABLE_CORE_SELECTOR;
+
+//----------------------------------------------------------------------------
+// CPU PERFORM EARLY INIT ON CORE
+//
+//----------------------------------------------------------------------------
+/// Flag definition.
+
+// Condition
+#define PERFORM_EARLY_WARM_RESET 0x1 // bit 0 --- the related function needs to be run if it's warm reset
+#define PERFORM_EARLY_COLD_BOOT 0x2 // bit 1 --- the related function needs to be run if it's cold boot
+
+// TimePoint
+#define PERFORM_TP_AFTER_AP_LAUNCH 0x40000000ul // bit 30 --- the related function needs to be run after AP launch
+#define PERFORM_TP_BEFORE_AP_LAUNCH 0x80000000ul // bit 31 --- the related function needs to be run before AP launch
+
+#define PERFORM_TP_ALL (PERFORM_TP_AFTER_AP_LAUNCH | PERFORM_TP_BEFORE_AP_LAUNCH)
+
+#define PERFORM_EARLY_ANY_CONDITION (PERFORM_EARLY_WARM_RESET | PERFORM_EARLY_COLD_BOOT)
+
+// Initializer bit pattern values for platform features.
+// Keep in synch with the PLATFORM_FEATURES struct!
+
+// The 5 control flow modes.
+#define AMD_PF_NFCM BIT0
+#define AMD_PF_UMA BIT1 // UMA_DR
+#define AMD_PF_UMA_IFCM BIT2
+#define AMD_PF_IFCM BIT3
+#define AMD_PF_IOMMU BIT4
+// Degree of HT connectivity possible.
+#define AMD_PF_SINGLE_LINK BIT5
+#define AMD_PF_MULTI_LINK BIT6
+// For some legacy MSRs, define a couple core count bits. Do not continue adding
+// core counts to the platform feats, if you need more than this design a table entry type.
+// Here, provide exactly 1, exactly 2, or anything else.
+#define AMD_PF_SINGLE_CORE BIT7
+#define AMD_PF_DUAL_CORE BIT8
+#define AMD_PF_MULTI_CORE BIT9
+
+// Not a platform type, but treat all others as AND
+#define AMD_PF_AND BIT31
+
+#define AMD_PF_ALL (AMD_PF_NFCM | \
+ AMD_PF_UMA | \
+ AMD_PF_UMA_IFCM | \
+ AMD_PF_IFCM | \
+ AMD_PF_IOMMU | \
+ AMD_PF_SINGLE_LINK | \
+ AMD_PF_MULTI_LINK | \
+ AMD_PF_SINGLE_CORE | \
+ AMD_PF_DUAL_CORE | \
+ AMD_PF_MULTI_CORE)
+// Do not include AMD_PF_AND in AMD_PF_ALL !
+
+/**
+ * The current platform features.
+ *
+ * Keep this in sync with defines above that are used in the initializers!
+ *
+ * The comments with the bit number are useful for the computing the reserved member size, but
+ * do not write code that assumes you know what bit number one of these members is.
+ *
+ * These platform features are standard for all logical families and models.
+ */
+typedef struct {
+ UINT32 PlatformNfcm:1; ///< BIT_0 Normal Flow Control Mode.
+ UINT32 PlatformUma:1; ///< BIT_1 UMA (Display Refresh) Flow Control.
+ UINT32 PlatformUmaIfcm:1; ///< BIT_2 UMA using Isochronous Flow Control.
+ UINT32 PlatformIfcm:1; ///< BIT_3 Isochronous Flow Control Mode (not UMA).
+ UINT32 PlatformIommu:1; ///< BIT_4 IOMMU (a special case Isochronous mode).
+ UINT32 PlatformSingleLink:1; ///< BIT_5 The processor is in a package which implements only a single HT Link.
+ UINT32 PlatformMultiLink:1; ///< BIT_6 The processor is in a package which implements more than one HT Link.
+ UINT32 PlatformSingleCore:1; ///< BIT_7 Single Core processor, for legacy entries.
+ UINT32 PlatformDualCore:1; ///< BIT_8 Dual Core processor, for legacy entries.
+ UINT32 PlatformMultiCore:1; ///< BIT_9 More than dual Core processor, for legacy entries.
+ UINT32 :(30 - 9); ///< The possibilities are (not quite) endless.
+ UINT32 AndPlatformFeats:1; ///< BIT_31
+} PLATFORM_FEATURES;
+
+/**
+ * Platform Features
+ */
+typedef union {
+ UINT32 PlatformValue; ///< Describe Platform Features in UINT32.
+ ///< This one goes first, because then initializers use it automatically for the union.
+ PLATFORM_FEATURES PlatformFeatures; ///< Describe Platform Features in structure
+} PLATFORM_FEATS;
+
+// Sublink Types are defined so they can match each attribute against either
+// sublink zero or one. The table entry must contain the correct matching
+// values based on the register. This is available in the BKDG, for each register
+// which sublink it controls. If the register is independent of sublink, OR values
+// together or use HT_LINKTYPE_ALL to match if either sublink matches (ex. E0 - E5).
+// Sublink 0 types, bits 0 thru 14
+#define HTPHY_LINKTYPE_SL0_HT3 BIT0
+#define HTPHY_LINKTYPE_SL0_HT1 BIT1
+#define HTPHY_LINKTYPE_SL0_COHERENT BIT2
+#define HTPHY_LINKTYPE_SL0_NONCOHERENT BIT3
+#define HTPHY_LINKTYPE_SL0_LINK0 BIT4
+#define HTPHY_LINKTYPE_SL0_LINK1 BIT5
+#define HTPHY_LINKTYPE_SL0_LINK2 BIT6
+#define HTPHY_LINKTYPE_SL0_LINK3 BIT7
+#define HTPHY_LINKTYPE_SL0_INTERNAL BIT8
+#define HTPHY_LINKTYPE_SL0_EXTERNAL BIT9
+#define HTPHY_LINKTYPE_SL0_AND BIT15
+
+// SubLink 1 types, bits 16 thru 30
+#define HTPHY_LINKTYPE_SL1_HT3 BIT16
+#define HTPHY_LINKTYPE_SL1_HT1 BIT17
+#define HTPHY_LINKTYPE_SL1_COHERENT BIT18
+#define HTPHY_LINKTYPE_SL1_NONCOHERENT BIT19
+#define HTPHY_LINKTYPE_SL1_LINK4 BIT20
+#define HTPHY_LINKTYPE_SL1_LINK5 BIT21
+#define HTPHY_LINKTYPE_SL1_LINK6 BIT22
+#define HTPHY_LINKTYPE_SL1_LINK7 BIT23
+#define HTPHY_LINKTYPE_SL1_INTERNAL BIT24
+#define HTPHY_LINKTYPE_SL1_EXTERNAL BIT25
+#define HTPHY_LINKTYPE_SL1_AND BIT31
+
+#define HTPHY_LINKTYPE_SL0_ALL (HTPHY_LINKTYPE_SL0_HT3 | \
+ HTPHY_LINKTYPE_SL0_HT1 | \
+ HTPHY_LINKTYPE_SL0_COHERENT | \
+ HTPHY_LINKTYPE_SL0_NONCOHERENT | \
+ HTPHY_LINKTYPE_SL0_LINK0 | \
+ HTPHY_LINKTYPE_SL0_LINK1 | \
+ HTPHY_LINKTYPE_SL0_LINK2 | \
+ HTPHY_LINKTYPE_SL0_LINK3 | \
+ HTPHY_LINKTYPE_SL0_INTERNAL | \
+ HTPHY_LINKTYPE_SL0_EXTERNAL)
+#define HTPHY_LINKTYPE_SL1_ALL (HTPHY_LINKTYPE_SL1_HT3 | \
+ HTPHY_LINKTYPE_SL1_HT1 | \
+ HTPHY_LINKTYPE_SL1_COHERENT | \
+ HTPHY_LINKTYPE_SL1_NONCOHERENT | \
+ HTPHY_LINKTYPE_SL1_LINK4 | \
+ HTPHY_LINKTYPE_SL1_LINK5 | \
+ HTPHY_LINKTYPE_SL1_LINK6 | \
+ HTPHY_LINKTYPE_SL1_LINK7 | \
+ HTPHY_LINKTYPE_SL1_INTERNAL | \
+ HTPHY_LINKTYPE_SL1_EXTERNAL)
+#define HTPHY_LINKTYPE_ALL (HTPHY_LINKTYPE_SL0_ALL | HTPHY_LINKTYPE_SL1_ALL)
+
+#define HTPHY_REGISTER_MAX 0x0000FFFFul
+/**
+ * HT PHY Link Features
+ */
+typedef struct {
+ UINT32 HtPhySL0Ht3:1; ///< Ht Phy Sub-link 0 Ht3
+ UINT32 HtPhySL0Ht1:1; ///< Ht Phy Sub-link 0 Ht1
+ UINT32 HtPhySL0Coh:1; ///< Ht Phy Sub-link 0 Coherent
+ UINT32 HtPhySL0NonCoh:1; ///< Ht Phy Sub-link 0 NonCoherent
+ UINT32 HtPhySL0Link0:1; ///< Ht Phy Sub-link 0 specifically for node link 0.
+ UINT32 HtPhySL0Link1:1; ///< Ht Phy Sub-link 0 specifically for node link 1.
+ UINT32 HtPhySL0Link2:1; ///< Ht Phy Sub-link 0 specifically for node link 2.
+ UINT32 HtPhySL0Link3:1; ///< Ht Phy Sub-link 0 specifically for node link 3.
+ UINT32 HtPhySL0Internal:1; ///< Ht Phy Sub-link 0 is internal link. Intended for IDS support.
+ UINT32 HtPhySL0External:1; ///< Ht Phy Sub-link 0 is external link. Intended for IDS support.
+ UINT32 :(14 - 9); ///< Ht Phy Sub-link 0 Pad
+ UINT32 HtPhySL0And:1; ///< Ht Phy feature match should match all selected features, for sub-link 0.
+ UINT32 HtPhySL1Ht3:1; ///< Ht Phy Sub-link 1 Ht3
+ UINT32 HtPhySL1Ht1:1; ///< Ht Phy Sub-link 1 Ht1
+ UINT32 HtPhySL1Coh:1; ///< Ht Phy Sub-link 1 Coherent
+ UINT32 HtPhySL1NonCoh:1; ///< Ht Phy Sub-link 1 NonCoherent
+ UINT32 HtPhySL1Link4:1; ///< Ht Phy Sub-link 1 specifically for node link 4.
+ UINT32 HtPhySL1Link5:1; ///< Ht Phy Sub-link 1 specifically for node link 5.
+ UINT32 HtPhySL1Link6:1; ///< Ht Phy Sub-link 1 specifically for node link 6.
+ UINT32 HtPhySL1Link7:1; ///< Ht Phy Sub-link 1 specifically for node link 7.
+ UINT32 HtPhySL1Internal:1; ///< Ht Phy Sub-link 1 is internal link. Intended for IDS support.
+ UINT32 HtPhySL1External:1; ///< Ht Phy Sub-link 1 is external link. Intended for IDS support.
+ UINT32 :(30 - 25); ///< Ht Phy Sub-link 1 Pad
+ UINT32 HtPhySL1And:1; ///< Ht Phy feature match should match all selected features, for sub-link 1.
+} HT_PHY_LINK_FEATURES;
+
+/**
+ * Ht Phy Link Features
+ */
+typedef union {
+ UINT32 HtPhyLinkValue; ///< Describe HY Phy Features in UINT32.
+ ///< This one goes first, because then initializers use it automatically for the union.
+ HT_PHY_LINK_FEATURES HtPhyLinkFeatures; ///< Describe HT Phy Features in structure.
+} HT_PHY_LINK_FEATS;
+
+// DB Level for initializing Deemphasis
+// This must be in sync with DEEMPHASIS_FEATURES and PLATFORM_DEEMPHASIS_LEVEL (agesa.h)
+#define DEEMPHASIS_LEVEL_NONE BIT0
+#define DEEMPHASIS_LEVEL__3 BIT1
+#define DEEMPHASIS_LEVEL__6 BIT2
+#define DEEMPHASIS_LEVEL__8 BIT3
+#define DEEMPHASIS_LEVEL__11 BIT4
+#define DEEMPHASIS_LEVEL__11_8 BIT5
+#define DCV_LEVEL_NONE BIT16
+#define DCV_LEVEL__2 BIT17
+#define DCV_LEVEL__3 BIT18
+#define DCV_LEVEL__5 BIT19
+#define DCV_LEVEL__6 BIT20
+#define DCV_LEVEL__7 BIT21
+#define DCV_LEVEL__8 BIT22
+#define DCV_LEVEL__9 BIT23
+#define DCV_LEVEL__11 BIT24
+// Note that an "AND" feature doesn't make any sense, levels are mutually exclusive.
+
+// An error check value.
+#define DEEMPHASIS_LEVELS_ALL (DEEMPHASIS_LEVEL_NONE | \
+ DEEMPHASIS_LEVEL__3 | \
+ DEEMPHASIS_LEVEL__6 | \
+ DEEMPHASIS_LEVEL__8 | \
+ DEEMPHASIS_LEVEL__11 | \
+ DEEMPHASIS_LEVEL__11_8)
+
+#define DCV_LEVELS_ALL (DCV_LEVEL_NONE | \
+ DCV_LEVEL__2 | \
+ DCV_LEVEL__3 | \
+ DCV_LEVEL__5 | \
+ DCV_LEVEL__6 | \
+ DCV_LEVEL__7 | \
+ DCV_LEVEL__8 | \
+ DCV_LEVEL__9 | \
+ DCV_LEVEL__11)
+
+#define VALID_DEEMPHASIS_LEVELS (DEEMPHASIS_LEVELS_ALL | DCV_LEVELS_ALL)
+
+/**
+ * Deemphasis Ht Phy Link Deemphasis.
+ *
+ * This must be in sync with defines above and ::PLATFORM_DEEMPHASIS_LEVEL (agesa.h)
+ */
+typedef struct {
+ UINT32 DeemphasisLevelNone:1; ///< The deemphasis level None.
+ UINT32 DeemphasisLevelMinus3:1; ///< The deemphasis level minus 3 db.
+ UINT32 DeemphasisLevelMinus6:1; ///< The deemphasis level minus 6 db.
+ UINT32 DeemphasisLevelMinus8:1; ///< The deemphasis level minus 8 db.
+ UINT32 DeemphasisLevelMinus11:1; ///< The deemphasis level minus 11 db.
+ UINT32 DeemphasisLevelMinus11w8:1; ///< The deemphasis level minus 11 db, minus 8 precursor.
+ UINT32 :(15 - 5); ///< reserved.
+ UINT32 DcvLevelNone:1; ///< The level for DCV None.
+ UINT32 DcvLevelMinus2:1; ///< The level for DCV minus 2 db.
+ UINT32 DcvLevelMinus3:1; ///< The level for DCV minus 3 db.
+ UINT32 DcvLevelMinus5:1; ///< The level for DCV minus 5 db.
+ UINT32 DcvLevelMinus6:1; ///< The level for DCV minus 6 db.
+ UINT32 DcvLevelMinus7:1; ///< The level for DCV minus 7 db.
+ UINT32 DcvLevelMinus8:1; ///< The level for DCV minus 8 db.
+ UINT32 DcvLevelMinus9:1; ///< The level for DCV minus 9 db.
+ UINT32 DcvLevelMinus11:1; ///< The level for DCV minus 11 db.
+ UINT32 :(15 - 8); ///< reserved.
+} DEEMPHASIS_FEATURES;
+
+/**
+ * Deemphasis Ht Phy Link Features.
+ */
+typedef union {
+ UINT32 DeemphasisValues; ///< Initialize HT Deemphasis in UINT32.
+ DEEMPHASIS_FEATURES DeemphasisLevels; ///< HT Deemphasis levels.
+} DEEMPHASIS_FEATS;
+
+// Initializer bit patterns for PERFORMANCE_PROFILE_FEATS.
+#define PERFORMANCE_REFRESH_REQUEST_32B BIT0
+#define PERFORMANCE_PROBEFILTER BIT1
+#define PERFORMANCE_L3_CACHE BIT2
+#define PERFORMANCE_NO_L3_CACHE BIT3
+#define PERFORMANCE_MCT_ISOC_VARIABLE BIT4
+#define PERFORMANCE_IS_WARM_RESET BIT5
+#define PERFORMANCE_VRM_HIGH_SPEED_ENABLE BIT6
+#define PERFORMANCE_NB_PSTATES_ENABLE BIT7
+#define PERFORMANCE_AND BIT31
+
+#define PERFORMANCE_PROFILE_ALL (PERFORMANCE_REFRESH_REQUEST_32B | \
+ PERFORMANCE_PROBEFILTER | \
+ PERFORMANCE_L3_CACHE | \
+ PERFORMANCE_NO_L3_CACHE | \
+ PERFORMANCE_MCT_ISOC_VARIABLE | \
+ PERFORMANCE_IS_WARM_RESET | \
+ PERFORMANCE_VRM_HIGH_SPEED_ENABLE | \
+ PERFORMANCE_NB_PSTATES_ENABLE)
+
+/**
+ * Performance Profile specific Type Features.
+ *
+ * Register settings for the different control flow modes can have additional dependencies
+ */
+typedef struct {
+ UINT32 RefreshRequest32Byte:1; ///< BIT_0. Display Refresh Requests use 32 bytes (32BE).
+ UINT32 ProbeFilter:1; ///< BIT_1 Probe Filter will be enabled.
+ UINT32 L3Cache:1; ///< BIT_2 L3 Cache is present.
+ UINT32 NoL3Cache:1; ///< BIT_3 L3 Cache is NOT present.
+ UINT32 MctIsocVariable:1; ///< BIT_4 Mct Isoc Read Priority set to variable.
+ UINT32 IsWarmReset:1; ///< BIT_5 This boot is on a warm reset, cold reset pass is already completed.
+ UINT32 VrmHighSpeed:1; ///< BIT_6 Select high speed VRM.
+ UINT32 NbPstates:1; ///< BIT_7 Northbridge PStates are enabled
+ UINT32 :(30 - 7); ///< available for future expansion.
+ UINT32 AndPerformanceFeats:1; ///< BIT_31. AND other selected features.
+} PERFORMANCE_PROFILE_FEATURES;
+
+/**
+ * Performance Profile features.
+ */
+typedef union {
+ UINT32 PerformanceProfileValue; ///< Initializer value.
+ PERFORMANCE_PROFILE_FEATURES PerformanceProfileFeatures; ///< The performance profile features.
+} PERFORMANCE_PROFILE_FEATS;
+
+/**
+ * Package Type Features
+ *
+ */
+typedef struct {
+ UINT32 PkgType0:1; ///< Package Type 0
+ UINT32 PkgType1:1; ///< Package Type 1
+ UINT32 PkgType2:1; ///< Package Type 2
+ UINT32 PkgType3:1; ///< Package Type 3
+ UINT32 PkgType4:1; ///< Package Type 4
+ UINT32 PkgType5:1; ///< Package Type 5
+ UINT32 PkgType6:1; ///< Package Type 6
+ UINT32 PkgType7:1; ///< Package Type 7
+ UINT32 PkgType8:1; ///< Package Type 8
+ UINT32 PkgType9:1; ///< Package Type 9
+ UINT32 PkgType10:1; ///< Package Type 10
+ UINT32 PkgType11:1; ///< Package Type 11
+ UINT32 PkgType12:1; ///< Package Type 12
+ UINT32 PkgType13:1; ///< Package Type 13
+ UINT32 PkgType14:1; ///< Package Type 14
+ UINT32 PkgType15:1; ///< Package Type 15
+ UINT32 Reserved:15; ///< Package Type Reserved
+ UINT32 ReservedAndFeats:1; ///< BIT_31. AND other selected features. Always zero here.
+} PACKAGE_TYPE_FEATURES;
+
+// Initializer Values for Package Type
+#define PACKAGE_TYPE_ALL 0XFFFF ///< Package Type apply all packages
+
+// Initializer Values for Ht Host Pci Config Registers
+#define HT_HOST_FEAT_COHERENT BIT0
+#define HT_HOST_FEAT_NONCOHERENT BIT1
+#define HT_HOST_FEAT_GANGED BIT2
+#define HT_HOST_FEAT_UNGANGED BIT3
+#define HT_HOST_FEAT_HT3 BIT4
+#define HT_HOST_FEAT_HT1 BIT5
+#define HT_HOST_AND BIT31
+
+#define HT_HOST_FEATURES_ALL (HT_HOST_FEAT_COHERENT | \
+ HT_HOST_FEAT_NONCOHERENT | \
+ HT_HOST_FEAT_GANGED | \
+ HT_HOST_FEAT_UNGANGED | \
+ HT_HOST_FEAT_HT3 | \
+ HT_HOST_FEAT_HT1)
+
+/**
+ * HT Host PCI register features.
+ *
+ * Links which are not connected do not match any of these features.
+ */
+typedef struct {
+ UINT32 Coherent:1; ///< BIT_0 Apply to links with a coherent connection.
+ UINT32 NonCoherent:1; ///< BIT_1 Apply to links with a non-coherent connection.
+ UINT32 Ganged:1; ///< BIT_2 Apply to links with a ganged connection.
+ UINT32 UnGanged:1; ///< BIT_3 Apply to links with a unganged connection.
+ UINT32 Ht3:1; ///< BIT_4 Apply to links with HT3 frequency (> 1000 MHz)
+ UINT32 Ht1:1; ///< BIT_5 Apply to links with HT1 frequency (< 1200 MHz)
+ UINT32 :(30 - 5); ///< Future expansion.
+ UINT32 AndHtHostFeats:1; ///< BIT_31. AND other selected features.
+} HT_HOST_FEATURES;
+
+/**
+ * HT Host features for table data.
+ */
+typedef union {
+ UINT32 HtHostValue; ///< Initializer value.
+ HT_HOST_FEATURES HtHostFeatures; ///< The HT Host Features.
+} HT_HOST_FEATS;
+
+// Core Range Initializer values.
+#define COUNT_RANGE_LOW 0ul
+#define COUNT_RANGE_HIGH 0xFFul
+
+// A count range matching none is often useful as the second range, matching will then be
+// based on the first range. A count range all is provided as a first range for default settings.
+#define COUNT_RANGE_NONE ((((COUNT_RANGE_HIGH) << 8) | (COUNT_RANGE_HIGH)) << 16)
+#define COUNT_RANGE_ALL (((COUNT_RANGE_HIGH) << 8) | (COUNT_RANGE_LOW))
+#define IGNORE_FREQ_0 (((COUNT_RANGE_HIGH) << 8) | (COUNT_RANGE_HIGH))
+#define IGNORE_PROCESSOR_0 (((COUNT_RANGE_HIGH) << 8) | (COUNT_RANGE_HIGH))
+
+#define CORE_RANGE_0(min, max) ((((UINT32)(max)) << 8) | (UINT32)(min))
+#define CORE_RANGE_1(min, max) (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16)
+#define PROCESSOR_RANGE_0(min, max) ((((UINT32)(max)) << 8) | (UINT32)(min))
+#define PROCESSOR_RANGE_1(min, max) (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16)
+#define DEGREE_RANGE_0(min, max) ((((UINT32)(max)) << 8) | (UINT32)(min))
+#define DEGREE_RANGE_1(min, max) (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16)
+#define FREQ_RANGE_0(min, max) ((((UINT32)(max)) << 8) | (UINT32)(min))
+#define FREQ_RANGE_1(min, max) (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16)
+#define COMPUTE_UNIT_RANGE_0(min, max) ((((UINT32)(max)) << 8) | (UINT32)(min))
+#define COMPUTE_UNIT_RANGE_1(min, max) (((((UINT32)(max)) << 8) | (UINT32)(min)) << 16)
+
+/**
+ * Count Range Feature, two count ranges for core counts, processor counts, or node counts.
+ */
+typedef struct {
+ UINT32 Range0Min:8; ///< The minimum of the first count range.
+ UINT32 Range0Max:8; ///< The maximum of the first count range.
+ UINT32 Range1Min:8; ///< The minimum of the second count range.
+ UINT32 Range1Max:8; ///< The maximum of the second count range.
+} COUNT_RANGE_FEATURE;
+
+/**
+ * Core Count Ranges for table data.
+ *
+ * Provide a pair of core count ranges. If the actual core count is included in either range (OR),
+ * the feature should be considered a match.
+ */
+typedef union {
+ UINT32 CoreRangeValue; ///< Initializer value.
+ COUNT_RANGE_FEATURE CoreRanges; ///< The Core Counts.
+} CORE_COUNT_RANGES;
+
+/**
+ * Processor count ranges for table data.
+ *
+ * Provide a pair of processor count ranges. If the actual counts are included in either range (OR),
+ * the feature should be considered a match.
+ */
+typedef union {
+ UINT32 ProcessorCountRangeValue; ///< Initializer value.
+ COUNT_RANGE_FEATURE ProcessorCountRanges; ///< The Processor and Node Counts.
+} PROCESSOR_COUNTS;
+
+/**
+ * Compute unit count ranges for table data.
+ *
+ * Provide a pair of compute unit count ranges. If the actual counts are included in either ranges (OR),
+ * the feature should be considered a match.
+ */
+typedef union {
+ UINT32 ComputeUnitRangeValue; ///< Initializer value.
+ COUNT_RANGE_FEATURE ComputeUnitRanges; ///< The Processor and Node Counts.
+} COMPUTE_UNIT_COUNTS;
+
+/**
+ * Connectivity count ranges for table data.
+ *
+ * Provide a processor count range and a system degree range. The degree of a system is
+ * the maximum degree of any node. The degree of a node is the number of nodes to which
+ * it is directly connected (not considering width or redundant links). If both the actual
+ * counts are included in each range (AND), the feature should be considered a match.
+ */
+typedef union {
+ UINT32 ConnectivityCountRangeValue; ///< Initializer value.
+ COUNT_RANGE_FEATURE ConnectivityCountRanges; ///< The Processor and Degree Counts.
+} CONNECTIVITY_COUNT;
+
+/**
+ * HT Frequency Count Range.
+ *
+ * Provide a pair of Frequency count ranges, with the frequency encoded as an HT Frequency value
+ * (such as would be programmed into the HT Host Link Frequency register). By converting a NB freq,
+ * the same count can be applied for it. If the actual value is included in either range
+ */
+typedef union {
+ UINT32 HtFreqCountRangeValue; ///< Initializer value.
+ COUNT_RANGE_FEATURE HtFreqCountRanges; ///< The HT Freq counts.
+} HT_FREQ_COUNTS;
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * The specific data for each table entry.
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * Make an extra type so we can use compilers that don't support designated initializers.
+ *
+ * All the entry type unions are no more than 5 UINT32's in size. For entry types which are a struct of UINT32's,
+ * this type can be used so that initializers can be declared TABLE_ENTRY_FIELDS, instead of a special non-union type.
+ * A non-union type then has to be cast back to TABLE_ENTRY_FIELDS in order to process the table, and you can't mix
+ * entry types with non-union initializers in the same table with any other type.
+ *
+ * If the entry type contains anything but UINT32's, then it must have a non-union initializer type for creating the
+ * actual tables. For example, MSR entry has UINT64 and workaround entry has a function pointer.
+ */
+typedef UINT32 GENERIC_TYPE_ENTRY_INITIALIZER[MAX_ENTRY_TYPE_ITEMS32];
+
+/**
+ * Table Entry Data for MSR Registers.
+ *
+ * Apply data to register after mask, for MSRs.
+ */
+typedef struct {
+ UINT32 Address; ///< MSR address
+ UINT64 Data; ///< Data to set in the MSR
+ UINT64 Mask; ///< Mask to be applied to the MSR. Set every bit of all updated fields.
+} MSR_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Data for PCI Registers.
+ *
+ * Apply data to register after mask, for PCI Config registers.
+ */
+typedef struct {
+ PCI_ADDR Address; ///< Address should contain Function, Offset only. It will apply to all CPUs
+ UINT32 Data; ///< Data to be written into PCI device
+ UINT32 Mask; ///< Mask to be used before data write. Set every bit of all updated fields.
+} PCI_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Data for HT Phy Registers.
+ *
+ * Apply data to register after mask, for HT Phy registers, repeated for all active links.
+ */
+typedef struct {
+ HT_PHY_LINK_FEATS TypeFeats; ///< HT Phy Link Features
+ UINT32 Address; ///< Address of Ht Phy Register
+ UINT32 Data; ///< Data to be written into PCI device
+ UINT32 Mask; ///< Mask to be used before data write. Set every bit of all updated fields.
+} HT_PHY_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Data for HT Phy Register Ranges.
+ *
+ * Apply data to register after mask, for a range of HT Phy registers, repeated for all active links.
+ */
+typedef struct {
+ HT_PHY_LINK_FEATS TypeFeats; ///< HT Phy Link Features
+ UINT32 LowAddress; ///< Low address of Ht Phy Register range.
+ UINT32 HighAddress; ///< High address of register range.
+ UINT32 Data; ///< Data to be written into PCI device.
+ UINT32 Mask; ///< Mask to be used before data write. Set every bit of all updated fields.
+} HT_PHY_RANGE_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Data for HT Phy Deemphasis Registers.
+ *
+ * Apply data to register after mask, for HT Phy registers, repeated for all active links.
+ */
+typedef struct {
+ DEEMPHASIS_FEATS Levels; ///< The DCV and Deemphasis levels to match
+ HT_PHY_TYPE_ENTRY_DATA HtPhyEntry; ///< The HT Phy Entry to set the deemphasis values
+} DEEMPHASIS_HT_PHY_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Date for HT Phy Frequency Count Register updates.
+ *
+ * Compare the NB freq to a range, the HT freq to a range, the link features.
+ * Apply data to register after mask, if all three matched.
+ */
+typedef struct {
+ HT_FREQ_COUNTS HtFreqCounts; ///< Specify the HT Frequency range.
+ HT_FREQ_COUNTS NbFreqCounts; ///< Specify the NB Frequency range.
+ HT_PHY_TYPE_ENTRY_DATA HtPhyEntry; ///< The HT Phy register update to perform.
+} HT_PHY_FREQ_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Data for Profile Fixup Registers.
+ *
+ * If TypeFeats matches current config, apply data to register after mask for PCI Config registers.
+ */
+typedef struct {
+ PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features.
+ PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data.
+} PROFILE_FIXUP_TYPE_ENTRY_DATA;
+
+/**
+ * A variation of PCI register for the HT Host registers.
+ *
+ * A setting to the HT Host buffer counts needs to be made to all the registers for
+ * all the links. There are also link specific criteria to check.
+ */
+typedef struct {
+ HT_HOST_FEATS TypeFeats; ///< Link Features.
+ PCI_ADDR Address; ///< Address of PCI Register to Fixed Up.
+ UINT32 Data; ///< Data to be written into PCI device
+ UINT32 Mask; ///< Mask to be used before data write. Set every bit of all updated fields.
+} HT_HOST_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * A variation of PCI register for the HT Host performance registers.
+ *
+ * A setting to the HT Host buffer counts needs to be made to all the registers for
+ * all the links. There are also link specific criteria to check.
+ */
+typedef struct {
+ PERFORMANCE_PROFILE_FEATS PerformanceFeats; ///< Performance Profile features.
+ HT_HOST_PCI_TYPE_ENTRY_DATA HtHostEntry; ///< Link Features.
+} HT_HOST_PERFORMANCE_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * A variation of HT Host PCI register for the Link Token registers.
+ *
+ * Use Link Features, Performance Fixup features, and processor counts to match entries.
+ * Link Features are iterated through the connected links. All the matching Link Token count
+ * registers are updated.
+ */
+typedef struct {
+ CONNECTIVITY_COUNT ConnectivityCount; ///< Specify Processor count and Degree count range.
+ PERFORMANCE_PROFILE_FEATS PerformanceFeats; ///< Performance Profile features.
+ HT_HOST_FEATS LinkFeats; ///< Link Features.
+ PCI_ADDR Address; ///< Address of PCI Register to Fixed Up.
+ UINT32 Data; ///< Data to be written into PCI device
+ UINT32 Mask; ///< Mask to be used before data write. Set every bit of all updated fields.
+} HT_TOKEN_PCI_REGISTER;
+
+/**
+ * Core Count dependent PCI registers.
+ *
+ */
+typedef struct {
+ PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features.
+ CORE_COUNT_RANGES CoreCounts; ///< Specify up to two core count ranges to match.
+ PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data.
+} CORE_COUNTS_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * Processor Count dependent PCI registers.
+ *
+ */
+typedef struct {
+ PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features.
+ PROCESSOR_COUNTS ProcessorCounts; ///< Specify a processor count range.
+ PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data.
+} PROCESSOR_COUNTS_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * Compute Unit Count dependent PCI registers.
+ *
+ */
+typedef struct {
+ PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features.
+ COMPUTE_UNIT_COUNTS ComputeUnitCounts; ///< Specify a compute unit count range.
+ PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data.
+} COMPUTE_UNIT_COUNTS_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * Compute Unit Count dependent MSR registers.
+ *
+ */
+typedef struct {
+ COMPUTE_UNIT_COUNTS ComputeUnitCounts; ///< Specify a compute unit count range.
+ MSR_TYPE_ENTRY_DATA MsrEntry; ///< The MSR Register entry data.
+} COMPUTE_UNIT_COUNTS_MSR_TYPE_ENTRY_DATA;
+
+/**
+ * System connectivity dependent PCI registers.
+ *
+ * The topology specific recommended settings are based on the different connectivity of nodes
+ * in each configuration: the more connections, the fewer resources each connection gets.
+ * The connectivity criteria translate as:
+ * - 2 Socket, half populated == Degree 1
+ * - 4 Socket, half populated == Degree 2
+ * - 2 Socket, fully populated == Degree 3
+ * - 4 Socket, fully populated == Degree > 3. (4 or 5 if 3P, 6 if 4P)
+ *
+ */
+typedef struct {
+ PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features.
+ CONNECTIVITY_COUNT ConnectivityCount; ///< Specify a system degree range.
+ PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data.
+} CONNECTIVITY_COUNTS_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * A Family Specific Workaround method.
+ *
+ * \@TableTypeFamSpecificInstances.
+ *
+ * When called, the entry's CPU Logical ID and Platform Features matched the current config.
+ * The method must implement any specific criteria checking for the workaround.
+ *
+ * See if you can use the other entries or make an entry specifically for the fix.
+ * After all, the purpose of having a table entry is to @b NOT have code which
+ * isn't generic feature code, but is family/model specific.
+ *
+ * @param[in] Data The table data value, for example to indicate which CPU and Platform types matched.
+ * @param[in] StdHeader Config params for library, services.
+ */
+typedef VOID F_FAM_SPECIFIC_WORKAROUND (
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/// Reference to a method.
+typedef F_FAM_SPECIFIC_WORKAROUND *PF_FAM_SPECIFIC_WORKAROUND;
+
+/**
+ * Table Entry Data for Family Specific Workarounds.
+ *
+ * See if you can use the other entries or make an entry specifically for the fix.
+ * After all, the purpose of having a table entry is to @b NOT have code which
+ * isn't generic feature code, but is family/model specific.
+ *
+ * Call DoAction passing Data.
+ */
+typedef struct {
+ PF_FAM_SPECIFIC_WORKAROUND DoAction; ///< A function implementing the workaround.
+ UINT32 Data; ///< This data is passed to DoAction().
+} FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_DATA;
+
+/**
+ * Package Type Features
+ *
+ * FamilyPackageType are various among CPU families.
+ *
+ */
+typedef union {
+ UINT32 PackageTypeValue; ///< Package Type
+ PACKAGE_TYPE_FEATURES FamilyPackageType; ///< Package Type of CPU family
+} PACKAGE_TYPE_FEATS;
+
+/**
+ * HT Features dependent Global PCI registers.
+ *
+ */
+typedef struct {
+ HT_HOST_FEATS LinkFeats; ///< Link Features.
+ PACKAGE_TYPE_FEATS PackageType; ///< Package Type
+ PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data.
+} HT_FEATURES_PCI_TYPE_ENTRY_DATA;
+
+/**
+ * Table Entry Data for HT Phy Registers which depend on performance profile features.
+ *
+ * Match performance profile features and link features.
+ * Apply data to register after mask, for HT Phy registers, repeated for all active links.
+ */
+typedef struct {
+ PERFORMANCE_PROFILE_FEATS TypeFeats; ///< Profile Fixup Features.
+ HT_PHY_TYPE_ENTRY_DATA HtPhyEntry; ///< The HT Phy Entry to set the deemphasis values
+} PROFILE_HT_PHY_TYPE_ENTRY_DATA;
+
+/**
+ * HT Link PCI registers that are not in the HT Host capability.
+ *
+ * Some HT Link registers have an instance per link, but are just sequential. Specify the base register
+ * in the table register address (link 0 sublink 0).
+ */
+typedef struct {
+ HT_HOST_FEATS LinkFeats; ///< Link Features.
+ PCI_TYPE_ENTRY_DATA PciEntry; ///< The PCI Register entry data.
+} HT_LINK_PCI_TYPE_ENTRY_DATA;
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * A complete register table and table entries.
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * All the available entry data types.
+ */
+typedef union {
+ GENERIC_TYPE_ENTRY_INITIALIZER InitialValues; ///< Not a valid entry type; as the first union item,
+ ///< it can be used with initializers.
+ MSR_TYPE_ENTRY_DATA MsrEntry; ///< Msr entry.
+ PCI_TYPE_ENTRY_DATA PciEntry; ///< PCI entry.
+ FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_DATA FamSpecificEntry; ///< Family Specific Workaround entry.
+ HT_PHY_TYPE_ENTRY_DATA HtPhyEntry; ///< HT Phy entry.
+ HT_PHY_RANGE_TYPE_ENTRY_DATA HtPhyRangeEntry; ///< A range of Ht Phy Registers
+ DEEMPHASIS_HT_PHY_TYPE_ENTRY_DATA DeemphasisEntry; ///< A HT Deemphasis level's settings.
+ HT_PHY_FREQ_TYPE_ENTRY_DATA HtPhyFreqEntry; ///< A frequency dependent Ht Phy Register setting.
+ PROFILE_FIXUP_TYPE_ENTRY_DATA FixupEntry; ///< Profile Fixup entry.
+ HT_HOST_PCI_TYPE_ENTRY_DATA HtHostEntry; ///< HT Host PCI entry.
+ HT_HOST_PERFORMANCE_PCI_TYPE_ENTRY_DATA HtHostPerfEntry; ///< HT Host Performance PCI entry
+ HT_TOKEN_PCI_REGISTER HtTokenEntry; ///< HT Link Token Count entry.
+ CORE_COUNTS_PCI_TYPE_ENTRY_DATA CoreCountEntry; ///< Core count dependent settings.
+ PROCESSOR_COUNTS_PCI_TYPE_ENTRY_DATA ProcCountEntry; ///< Processor count entry.
+ COMPUTE_UNIT_COUNTS_PCI_TYPE_ENTRY_DATA CompUnitCountEntry; ///< Compute unit count dependent entry.
+ CONNECTIVITY_COUNTS_PCI_TYPE_ENTRY_DATA TokenPciEntry; ///< System connectivity dependent Token register.
+ HT_FEATURES_PCI_TYPE_ENTRY_DATA HtFeatPciEntry; ///< HT Features PCI entry.
+ PROFILE_HT_PHY_TYPE_ENTRY_DATA HtPhyProfileEntry; ///< Performance dependent HT Phy register.
+ HT_LINK_PCI_TYPE_ENTRY_DATA HtLinkPciEntry; ///< Per Link, non HT Host, PCI registers.
+ COMPUTE_UNIT_COUNTS_MSR_TYPE_ENTRY_DATA CompUnitCountMsrEntry; ///< Compute unit count dependent MSR entry.
+} TABLE_ENTRY_DATA;
+
+/**
+ * Register Table Entry common fields.
+ *
+ * All the various types of register table entries are subclasses of this object.
+ */
+typedef struct {
+ TABLE_ENTRY_TYPE EntryType; ///< The type of table entry this is.
+ CPU_LOGICAL_ID CpuRevision; ///< Common CPU Logical ID match criteria.
+ PLATFORM_FEATS Features; ///< Common Platform Features match criteria.
+ TABLE_ENTRY_DATA Entry; ///< The type dependent entry data (ex. register, data, mask).
+} TABLE_ENTRY_FIELDS;
+
+/**
+ * An entire register table.
+ */
+typedef struct {
+ TABLE_CORE_SELECTOR Selector; ///< For efficiency, these cores should process this table
+ UINT32 TimePoint; ///< Time Point designator
+ UINTN NumberOfEntries; ///< The number of entries in the table.
+ CONST TABLE_ENTRY_FIELDS *Table; ///< The table entries.
+} REGISTER_TABLE;
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * Describe implementers for table entries.
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * Implement the semantics of a Table Entry Type.
+ *
+ * @TableEntryTypeInstances.
+ *
+ * @param[in] CurrentEntry The type specific entry data to be implemented (that is written).
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in] StdHeader Config params for library, services.
+ */
+typedef VOID F_DO_TABLE_ENTRY (
+ IN TABLE_ENTRY_DATA *CurrentEntry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/// Reference to a method
+typedef F_DO_TABLE_ENTRY *PF_DO_TABLE_ENTRY;
+
+/**
+ * Describe the attributes of a Table Entry Type.
+ */
+typedef struct {
+ TABLE_ENTRY_TYPE EntryType; ///< The type of table entry this describes.
+ PF_DO_TABLE_ENTRY DoTableEntry; ///< Provide all semantics associated with TABLE_ENTRY_DATA
+} TABLE_ENTRY_TYPE_DESCRIPTOR;
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * Non-union initializers for entry data which is not just UINT32.
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * A union of data types, that can be initialized with MSR data.
+ *
+ * This ensures the entry data is the same size as TABLE_ENTRY_DATA.
+ */
+typedef union {
+ MSR_TYPE_ENTRY_DATA MsrInitializer; ///< The data in the table initializer is assigned to this member.
+ TABLE_ENTRY_DATA Reserved; ///< Make sure the size is the same as the real union.
+} MSR_DATA_INITIALIZER;
+
+/**
+ * A type suitable for an initializer for MSR Table entries.
+ */
+typedef struct {
+ TABLE_ENTRY_TYPE Type; ///< The type of table entry this is.
+ CPU_LOGICAL_ID CpuRevision; ///< Common CPU Logical ID match criteria.
+ PLATFORM_FEATS Features; ///< Common Platform Features match criteria.
+ MSR_DATA_INITIALIZER EntryData; ///< The special union which accepts msr data initializer.
+} MSR_TYPE_ENTRY_INITIALIZER;
+
+/**
+ * A union of data types, that can be initialized with MSR CU data.
+ *
+ * This ensures the entry data is the same size as TABLE_ENTRY_DATA.
+ */
+typedef union {
+ COMPUTE_UNIT_COUNTS_MSR_TYPE_ENTRY_DATA MsrInitializer; ///< The data in the table initializer is assigned to this member.
+ TABLE_ENTRY_DATA Reserved; ///< Make sure the size is the same as the real union.
+} MSR_CU_DATA_INITIALIZER;
+
+/**
+ * A type suitable for an initializer for MSR CU count Table entries.
+ */
+typedef struct {
+ TABLE_ENTRY_TYPE Type; ///< The type of table entry this is.
+ CPU_LOGICAL_ID CpuRevision; ///< Common CPU Logical ID match criteria.
+ PLATFORM_FEATS Features; ///< Common Platform Features match criteria.
+ MSR_CU_DATA_INITIALIZER EntryData; ///< The special union which accepts msr data initializer.
+} MSR_CU_TYPE_ENTRY_INITIALIZER;
+
+/**
+ * A union of data types, that can be initialized with Family Specific Workaround data.
+ *
+ * This ensures the entry data is the same size as TABLE_ENTRY_DATA.
+ */
+typedef union {
+ FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_DATA FamSpecificInitializer; ///< The data in the table initializer is assigned to this member.
+ TABLE_ENTRY_DATA Reserved; ///< Make sure the size is the same as the real union.
+} FAM_SPECIFIC_WORKAROUND_DATA_INITIALIZER;
+
+/**
+ * A type suitable for an initializer for Family Specific Workaround Table entries.
+ */
+typedef struct {
+ TABLE_ENTRY_TYPE Type; ///< The type of table entry this is.
+ CPU_LOGICAL_ID CpuRevision; ///< Common CPU Logical ID match criteria.
+ PLATFORM_FEATS Features; ///< Common Platform Features match criteria.
+ FAM_SPECIFIC_WORKAROUND_DATA_INITIALIZER EntryData; ///< Special union accepts family specific workaround data initializer.
+} FAM_SPECIFIC_WORKAROUND_TYPE_ENTRY_INITIALIZER;
+
+/*------------------------------------------------------------------------------------------*/
+/*
+ * Table related function prototypes (many are instance of F_DO_TABLE_ENTRY method).
+ */
+/*------------------------------------------------------------------------------------------*/
+
+/**
+ * Set the registers for this core based on entries in a list of Register Tables.
+ */
+VOID SetRegistersFromTables (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN UINT32 TimePoint,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Find the features of the running platform.
+ */
+VOID
+GetPlatformFeatures (
+ OUT PLATFORM_FEATS *Features,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Checks register table entry type specific criteria to the platform.
+ */
+BOOLEAN
+DoesEntryTypeSpecificInfoMatch (
+ IN UINT32 PlatformTypeSpecificFeatures,
+ IN UINT32 EntryTypeFeatures
+ );
+
+/**
+ * Perform the MSR Register Entry.
+ */
+VOID
+SetRegisterForMsrEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the PCI Register Entry.
+ */
+VOID
+SetRegisterForPciEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the Performance Profile PCI Register Entry.
+ */
+VOID
+SetRegisterForPerformanceProfileEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the HT Host PCI Register Entry.
+ */
+VOID
+SetRegisterForHtHostEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the HT Host Performance PCI Register Entry.
+ */
+VOID
+SetRegisterForHtHostPerfEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Set the HT Link Token Count registers.
+ */
+VOID
+SetRegisterForHtLinkTokenEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the Core Counts Performance PCI Register Entry.
+ */
+VOID
+SetRegisterForCoreCountsPerformanceEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the Processor Counts PCI Register Entry.
+ */
+VOID
+SetRegisterForProcessorCountsEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the Compute Unit Counts PCI Register Entry.
+ */
+VOID
+SetRegisterForComputeUnitCountsEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the Compute Unit Counts MSR Register Entry.
+ */
+VOID
+SetMsrForComputeUnitCountsEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the Family Specific Workaround Register Entry.
+ */
+VOID
+SetRegisterForFamSpecificWorkaroundEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Program HT Phy PCI registers.
+ */
+VOID
+SetRegisterForHtPhyEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Program a range of HT Phy PCI registers.
+ */
+VOID
+SetRegisterForHtPhyRangeEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Program Deemphasis registers, for the platform specified levels.
+ */
+VOID
+SetRegisterForDeemphasisEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Program HT Phy PCI registers which have complex frequency dependencies.
+ */
+VOID
+SetRegisterForHtPhyFreqEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the Processor Token Counts PCI Register Entry.
+ */
+VOID
+SetRegisterForTokenPciEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the HT Link Feature PCI Register Entry.
+ */
+VOID
+SetRegisterForHtFeaturePciEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the HT Phy Performance Profile Register Entry.
+ */
+VOID
+SetRegisterForHtPhyProfileEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Perform the HT Link PCI Register Entry.
+ */
+VOID
+SetRegisterForHtLinkPciEntry (
+ IN TABLE_ENTRY_DATA *Entry,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Compare counts to a pair of ranges.
+ */
+BOOLEAN
+IsEitherCountInRange (
+ IN UINTN FirstCount,
+ IN UINTN SecondCount,
+ IN COUNT_RANGE_FEATURE Ranges
+ );
+
+/**
+ * Returns the performance profile features list of the currently running processor core.
+ */
+VOID
+GetPerformanceFeatures (
+ OUT PERFORMANCE_PROFILE_FEATS *Features,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _CPU_TABLE_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cahalt.asm b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cahalt.asm
new file mode 100644
index 0000000..a6ca517
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cahalt.asm
@@ -0,0 +1,367 @@
+;/**
+; * @file
+; *
+; * Agesa pre-memory miscellaneous support, including ap halt loop.
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project: AGESA
+; * @e sub-project: CPU
+; * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+; */
+;*****************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*****************************************************************************
+
+ .XLIST
+ INCLUDE agesa.inc
+ INCLUDE cpcarmac.inc
+ .LIST
+
+ .586P
+
+;===============================================
+;===============================================
+;==
+;== M E M O R Y A B S E N T S E G M E N T
+;==
+;===============================================
+;===============================================
+ .MODEL flat
+ .CODE
+;======================================================================
+; ExecuteFinalHltInstruction: Disables the stack and performs
+; a hlt instruction on an AP.
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; eax, ebx, ecx, edx, esp
+;
+;======================================================================
+PUBLIC ExecuteFinalHltInstruction
+ExecuteFinalHltInstruction PROC NEAR C USES ESI EDI HaltFlags:DWORD, ApMtrrSettingList:PTR, StandardHeader:PTR
+
+ mov esi, StandardHeader ; The code must reference all parameters to avoid a build warning
+ mov esi, HaltFlags
+ mov edi, ApMtrrSettingList
+ ; Do these special steps in case if the core is part of a compute unit
+ ; Note: The following bits are family specific flags, that gets set during build time,
+ ; and indicates things like "family cache control methodology", etc.
+ ; esi bit0 = 0 -> not a Primary core
+ ; esi bit0 = 1 -> Primary core
+ ; esi bit1 = 0 -> Cache disable
+ ; esi bit1 = 1 -> Cache enable
+ .if (esi & 2h)
+ AMD_CPUID CPUID_MODEL
+ shr eax, 20 ; AL = cpu extended family
+ cmp al, 05h ; Is this family 15h?
+ jne not_fam15_skip_combineCr0Cd ; Branch if not family15h
+
+ ; Set CombineCr0Cd bit
+ mov ecx, CU_CFG3
+ _RDMSR
+ bts edx, (COMBINE_CR0_CD - 32)
+ _WRMSR
+
+not_fam15_skip_combineCr0Cd:
+ ; Clear the CR0.CD bit
+ mov eax, CR0 ; Make sure cache is enabled for all APs
+ btr eax, CR0_CD
+ btr eax, CR0_NW
+ mov CR0, eax ; Write back to CR0
+ .else
+ mov eax, CR0 ; Make sure cache is disabled for all APs
+ bts eax, CR0_CD ; Disable cache
+ bts eax, CR0_NW
+ mov CR0, eax ; Write back to CR0
+ .endif
+
+ .if (esi & 1h)
+ ; This core is a primary core and needs to do all the MTRRs, including shared MTRRs.
+ mov esi, edi ; Get ApMtrrSettingList
+
+ ; Configure the MTRRs on the AP so
+ ; when it runs remote code it will execute
+ ; out of RAM instead of ROM.
+
+ ; Disable MTRRs and turn on modification enable bit
+ mov ecx, MTRR_SYS_CFG
+ _RDMSR
+ btr eax, MTRR_VAR_DRAM_EN ; Disable
+ bts eax, MTRR_FIX_DRAM_MOD_EN ; Enable
+ btr eax, MTRR_FIX_DRAM_EN ; Disable
+ _WRMSR
+
+ ; Setup default values for Fixed-Sized MTRRs
+ ; Set 7FFFh-00000h as WB
+ mov ecx, AMD_AP_MTRR_FIX64k_00000
+ mov eax, 1E1E1E1Eh
+ mov edx, eax
+ _WRMSR
+
+ ; Set 9FFFFh-80000h also as WB
+ mov ecx, AMD_AP_MTRR_FIX16k_80000
+ _WRMSR
+
+ ; Set BFFFFh-A0000h as Uncacheable Memory-mapped IO
+ mov ecx, AMD_AP_MTRR_FIX16k_A0000
+ xor eax, eax
+ xor edx, edx
+ _WRMSR
+
+ ; Set DFFFFh-C0000h as Uncacheable Memory-mapped IO
+ xor eax, eax
+ xor edx, edx
+ mov ecx, AMD_AP_MTRR_FIX4k_C0000
+
+CDLoop:
+ _WRMSR
+ inc ecx
+ cmp ecx, AMD_AP_MTRR_FIX4k_D8000
+ jbe CDLoop
+
+ ; Set FFFFFh-E0000h as Uncacheable Memory
+ mov eax, 18181818h
+ mov edx, eax
+
+ mov ecx, AMD_AP_MTRR_FIX4k_E0000
+
+EFLoop:
+ _WRMSR
+ inc ecx
+ cmp ecx, AMD_AP_MTRR_FIX4k_F8000
+ jbe EFLoop
+
+ ; If IBV provided settings for Fixed-Sized MTRRs,
+ ; overwrite the default settings.
+ .if ((esi != 0) && (esi != 0FFFFFFFFh))
+ mov ecx, (AP_MTRR_SETTINGS ptr [esi]).MsrAddr
+ ; While we are not at the end of the list
+ .while (ecx != CPU_LIST_TERMINAL)
+ ; Ensure that the MSR address is valid for Fixed-Sized MTRRs
+ .if ( ((ecx >= AMD_AP_MTRR_FIX4k_C0000) && (ecx <= AMD_AP_MTRR_FIX4k_F8000)) || \
+ (ecx == AMD_AP_MTRR_FIX64k_00000) || (ecx == AMD_AP_MTRR_FIX16k_80000 ) || (ecx == AMD_AP_MTRR_FIX16k_A0000))
+ mov eax, dword ptr (AP_MTRR_SETTINGS ptr [esi]).MsrData
+ mov edx, dword ptr (AP_MTRR_SETTINGS ptr [esi+4]).MsrData
+ _WRMSR
+ .endif
+ add esi, sizeof (AP_MTRR_SETTINGS)
+ mov ecx, (AP_MTRR_SETTINGS ptr [esi]).MsrAddr
+ .endw
+ .endif
+
+ ; Enable fixed-range and variable-range MTRRs
+ mov ecx, AMD_MTRR_DEFTYPE
+ _RDMSR
+ bts eax, MTRR_DEF_TYPE_EN ; MtrrDefTypeEn
+ bts eax, MTRR_DEF_TYPE_FIX_EN ; MtrrDefTypeFixEn
+ _WRMSR
+
+ ; Enable Top-of-Memory setting
+ ; Enable use of RdMem/WrMem bits attributes
+ mov ecx, MTRR_SYS_CFG
+ _RDMSR
+ bts eax, MTRR_VAR_DRAM_EN ; Enable
+ btr eax, MTRR_FIX_DRAM_MOD_EN ; Disable
+ bts eax, MTRR_FIX_DRAM_EN ; Enable
+ _WRMSR
+
+ mov esi, (1 SHL FLAG_IS_PRIMARY)
+ .else ; end if primary core
+ xor esi, esi
+ .endif
+ ; Make sure not to touch any Shared MSR from this point on
+
+ AMD_DISABLE_STACK_FAMILY_HOOK
+
+ bt esi, FLAG_IS_PRIMARY
+ .if (carry?)
+ ; restore variable MTRR6 and MTRR7 to default states
+ mov ecx, AMD_MTRR_VARIABLE_MASK7 ; clear MTRRPhysBase6 MTRRPhysMask6
+ xor eax, eax ; and MTRRPhysBase7 MTRRPhysMask7
+ xor edx, edx
+ .while (cx >= AMD_MTRR_VARIABLE_BASE6)
+ _WRMSR
+ dec cx
+ .endw
+ .endif
+
+@@:
+ cli
+ hlt
+ jmp @B ;ExecuteHltInstruction
+ ret
+ExecuteFinalHltInstruction ENDP
+
+;======================================================================
+; ExecuteHltInstruction: Performs a hlt instruction.
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; eax, ebx, ecx, edx, esp
+;
+;======================================================================
+PUBLIC ExecuteHltInstruction
+ExecuteHltInstruction PROC NEAR C
+ cli
+ hlt
+ ret
+ExecuteHltInstruction ENDP
+
+;======================================================================
+; NmiHandler: Simply performs an IRET.
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; None
+;
+;======================================================================
+PUBLIC NmiHandler
+NmiHandler PROC NEAR C
+ iretd
+NmiHandler ENDP
+
+;======================================================================
+; GetCsSelector: Returns the current protected mode CS selector.
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; None
+;
+;======================================================================
+PUBLIC GetCsSelector
+GetCsSelector PROC NEAR C, CsSelector:PTR
+ push ax
+ push ebx
+
+ call FarCallGetCs
+ mov ebx, CsSelector
+ mov [ebx], ax
+ pop ebx
+ pop ax
+ ret
+GetCsSelector ENDP
+
+;======================================================================
+; FarCallGetCs:
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; none
+;
+;======================================================================
+FarCallGetCs PROC FAR PRIVATE
+
+ mov ax, ss:[esp + 4]
+ retf
+
+FarCallGetCs ENDP
+
+;======================================================================
+; SetIdtr:
+;
+; In:
+; @param[in] IdtPtr Points to IDT table
+;
+; Out:
+; None
+;
+; Destroyed:
+; none
+;
+;======================================================================
+PUBLIC SetIdtr
+SetIdtr PROC NEAR C USES EBX, IdtPtr:PTR
+ mov ebx, IdtPtr
+ lidt fword ptr ss:[ebx]
+ ret
+SetIdtr ENDP
+
+;======================================================================
+; GetIdtr:
+;
+; In:
+; @param[in] IdtPtr Points to IDT table
+;
+; Out:
+; None
+;
+; Destroyed:
+; none
+;
+;======================================================================
+PUBLIC GetIdtr
+GetIdtr PROC NEAR C USES EBX, IdtPtr:PTR
+ mov ebx, IdtPtr
+ sidt fword ptr ss:[ebx]
+ ret
+GetIdtr ENDP
+
+;======================================================================
+; ExecuteWbinvdInstruction: Performs a wbinvd instruction.
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; None
+;
+;======================================================================
+PUBLIC ExecuteWbinvdInstruction
+ExecuteWbinvdInstruction PROC NEAR C
+ wbinvd ; Write back the cache tag RAMs
+ ret
+ExecuteWbinvdInstruction ENDP
+
+END
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cahalt.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cahalt.c
new file mode 100644
index 0000000..bc80453
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cahalt.c
@@ -0,0 +1,160 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HyperTransport features and sequence implementation.
+ *
+ * Implements the external AmdHtInitialize entry point.
+ * Contains routines for directing the sequence of available features.
+ * Mostly, but not exclusively, AGESA_TESTPOINT invocations should be
+ * contained in this file, and not in the feature code.
+ *
+ * From a build option perspective, it may be that a few lines could be removed
+ * from compilation in this file for certain options. It is considered that
+ * the code savings from this are too small to be of concern and this file
+ * should not have any explicit build option implementation.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 35978 $ @e \$Date: 2010-08-07 02:18:50 +0800 (Sat, 07 Aug 2010) $
+ *
+ */
+/*
+*****************************************************************************
+*
+* Copyright (c) 2011, Advanced Micro Devices, Inc.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+* * Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* * Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in the
+* documentation and/or other materials provided with the distribution.
+* * Neither the name of Advanced Micro Devices, Inc. nor the names of
+* its contributors may be used to endorse or promote products derived
+* from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+* ***************************************************************************
+*
+*/
+
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "Filecode.h"
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+// typedef unsigned int uintptr_t;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+ExecuteFinalHltInstruction (
+ IN UINT32 SharedCore,
+ IN AP_MTRR_SETTINGS *ApMtrrSettingsList,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+NmiHandler (
+ IN OUT AMD_CONFIG_PARAMS *StdHeaderPtr
+ );
+
+VOID
+ExecuteHltInstruction (
+ IN OUT AMD_CONFIG_PARAMS *StdHeaderPtr
+ );
+
+VOID
+ExecuteWbinvdInstruction (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/// Structure needed to load the IDTR using the lidt instruction
+
+VOID
+SetIdtr (
+ IN IDT_BASE_LIMIT *IdtInfo,
+ IN OUT AMD_CONFIG_PARAMS *StdHeaderPtr
+ )
+{
+ __lidt (IdtInfo);
+}
+
+//----------------------------------------------------------------------------
+
+VOID
+GetCsSelector (
+ IN UINT16 *Selector,
+ IN OUT AMD_CONFIG_PARAMS *StdHeaderPtr
+ )
+{
+ static const UINT8 opcode [] = {0x8C, 0xC8, 0xC3}; // mov eax, cs; ret
+ *Selector = ((UINT16 (*)(void)) (size_t) opcode) ();
+}
+
+//----------------------------------------------------------------------------
+
+VOID
+NmiHandler (
+ IN OUT AMD_CONFIG_PARAMS *StdHeaderPtr
+ )
+{
+ static const UINT8 opcode [] = {0xCF}; // iret
+ ((void (*)(void)) (size_t) opcode) ();
+}
+
+//----------------------------------------------------------------------------
+
+VOID
+ExecuteHltInstruction (
+ IN OUT AMD_CONFIG_PARAMS *StdHeaderPtr
+ )
+{
+ _disable ();
+ __halt ();
+}
+
+//---------------------------------------------------------------------------
+
+VOID
+ExecuteWbinvdInstruction (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ __wbinvd ();
+}
+
+//----------------------------------------------------------------------------
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cahalt64.asm b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cahalt64.asm
new file mode 100644
index 0000000..f7a8e3e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cahalt64.asm
@@ -0,0 +1,173 @@
+;/**
+; * @file
+; *
+; * Agesa pre-memory miscellaneous support, including ap halt loop.
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project: AGESA
+; * @e sub-project: CPU
+; * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+; */
+;*****************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*****************************************************************************
+
+ text SEGMENT
+
+
+;======================================================================
+; ExecuteFinalHltInstruction: Performs a hlt instruction.
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; eax, ebx, ecx, edx, esp
+;
+;======================================================================
+ExecuteFinalHltInstruction PROC PUBLIC
+@@:
+ cli
+ hlt
+ jmp @B ;ExecuteHltInstruction
+ExecuteFinalHltInstruction ENDP
+
+;======================================================================
+; ExecuteHltInstruction: Performs a hlt instruction.
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; eax, ebx, ecx, edx, esp
+;
+;======================================================================
+ExecuteHltInstruction PROC PUBLIC
+ cli
+ hlt
+ ret
+ExecuteHltInstruction ENDP
+
+;======================================================================
+; NmiHandler: Simply performs an IRET.
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; None
+;
+;======================================================================
+NmiHandler PROC PUBLIC
+ iretq
+NmiHandler ENDP
+
+;======================================================================
+; GetCsSelector: Returns the current protected mode CS selector.
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; None
+;
+;======================================================================
+GetCsSelector PROC PUBLIC
+ ; This stub function is here to avoid compilation errors.
+ ; At this time, there is no need to provide a 64 bit function.
+ ret
+GetCsSelector ENDP
+
+;======================================================================
+; SetIdtr:
+;
+; In:
+; @param[in] IdtPtr Points to IDT table
+;
+; Out:
+; None
+;
+; Destroyed:
+; none
+;
+;======================================================================
+SetIdtr PROC PUBLIC
+ ; This stub function is here to avoid compilation errors.
+ ; At this time, there is no need to provide a 64 bit function.
+ ret
+SetIdtr ENDP
+
+;======================================================================
+; GetIdtr:
+;
+; In:
+; @param[in] IdtPtr Points to IDT table
+;
+; Out:
+; None
+;
+; Destroyed:
+; none
+;
+;======================================================================
+GetIdtr PROC PUBLIC
+ ; This stub function is here to avoid compilation errors.
+ ; At this time, there is no need to provide a 64 bit function.
+ ret
+GetIdtr ENDP
+
+;======================================================================
+; ExecuteWbinvdInstruction: Performs a wbinvd instruction.
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; None
+;
+;======================================================================
+ExecuteWbinvdInstruction PROC PUBLIC
+ wbinvd ; Write back the cache tag RAMs
+ ret
+ExecuteWbinvdInstruction ENDP
+
+END
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cahaltasm.S b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cahaltasm.S
new file mode 100644
index 0000000..97f6f16
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cahaltasm.S
@@ -0,0 +1,201 @@
+/*
+ * Copyright (c) 2011, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+.include "src/vendorcode/amd/agesa/f16kb/gcccar.inc"
+
+.code32
+.align 4
+.globl ExecuteFinalHltInstruction
+ .type ExecuteFinalHltInstruction, @function
+
+/* This function disables CAR. We don't care about the stack on this CPU */
+ExecuteFinalHltInstruction:
+ movl 4(%esp), %esi /* HaltFlags*/
+ movl 8(%esp), %edi /* ApMtrrSettingList */
+
+/* Do these special steps in case if the core is part of a compute unit
+ * Note: The following bits are family specific flags, that gets set during build time,
+ * and indicates things like "family cache control methodology", etc.
+ * esi bit0 = 0 -> not a Primary core
+ * esi bit0 = 1 -> Primary core
+ * esi bit1 = 0 -> Cache disable
+ * esi bit1 = 1 -> Cache enable
+ */
+
+ bt $1, %esi /* .if (esi & 2h) */
+ jz 0f
+ /* TODO: Set CombineCr0Cd bit */
+ //movl $CU_CFG3, %ecx
+ //rdmsr
+ //bts $(COMBINE_CR0_CD - 32), %edx
+ //wrmsr
+ /* Clear the CR0.CD bit */
+ movl %cr0, %eax /* Make sure cache is enabled for all APs */
+ btr $CR0_CD, %eax
+ btr $CR0_NW, %eax
+ mov %eax, %cr0 /* Write back to CR0 */
+ jmp 1f /* .else */
+0:
+ movl %cr0, %eax /* Make sure cache is disabled for all APs */
+ bts $CR0_CD, %eax /* Disable cache */
+ bts $CR0_NW, %eax
+ movl %eax, %cr0 /* Write back to CR0 */
+1: /* .endif */
+
+ bt $0, %esi /* .if (esi & 1h) */
+ jz 2f
+ /* This core is a primary core and needs to do all the MTRRs, including shared MTRRs. */
+ movl %edi, %esi /* Get ApMtrrSettingList */
+
+ /* Configure the MTRRs on the AP so
+ * when it runs remote code it will execute
+ * out of RAM instead of ROM.
+ */
+
+ /* Disable MTRRs and turn on modification enable bit */
+ movl $MTRR_SYS_CFG, %ecx
+ rdmsr
+ /* TODO: why comment this? */
+ btr $MTRR_VAR_DRAM_EN, %eax /* Disable */
+ bts $MTRR_FIX_DRAM_MOD_EN, %eax /* Enable */
+ btr $MTRR_FIX_DRAM_EN, %eax /* Disable */
+ bts $SYS_UC_LOCK_EN, %eax
+ wrmsr
+
+ /* Setup default values for Fixed-Sized MTRRs */
+ /* Set 7FFFh-00000h as WB */
+ movl $AMD_AP_MTRR_FIX64k_00000, %ecx
+ movl $0x1E1E1E1E, %eax
+ movl %eax, %edx
+ wrmsr
+
+ /* Set 9FFFFh-80000h also as WB */
+ movl $AMD_AP_MTRR_FIX16k_80000, %ecx
+ wrmsr
+
+ /* Set BFFFFh-A0000h as Uncacheable Memory-mapped IO */
+ movl $AMD_AP_MTRR_FIX16k_A0000, %ecx
+ xorl %eax, %eax
+ xorl %edx, %edx
+ wrmsr
+
+ /* Set DFFFFh-C0000h as Uncacheable Memory-mapped IO */
+ xorl %eax, %eax
+ xorl %edx, %edx
+ movl $AMD_AP_MTRR_FIX4k_C0000, %ecx
+
+CDLoop:
+ wrmsr
+ inc %ecx
+ cmp $AMD_AP_MTRR_FIX4k_D8000, %ecx
+ jbe CDLoop
+
+ /* Set FFFFFh-E0000h as Uncacheable Memory */
+ movl $0x18181818, %eax
+ movl %eax, %edx
+
+ mov $AMD_AP_MTRR_FIX4k_E0000, %ecx
+
+EFLoop:
+ wrmsr
+ inc %ecx
+ cmp $AMD_AP_MTRR_FIX4k_F8000, %ecx
+ jbe EFLoop
+
+ /* If IBV provided settings for Fixed-Sized MTRRs,
+ * overwrite the default settings. */
+ cmp $0, %esi /*.if ((esi != 0) && (esi != 0FFFFFFFFh)) */
+ jz 4f
+ cmp $0xFFFFFFFF, %esi
+ jz 4f
+ 5:
+ mov (%esi), %ecx /* (AP_MTRR_SETTINGS ptr [esi]).MsrAddr */
+ /* While we are not at the end of the list */
+ cmp $CPU_LIST_TERMINAL, %ecx /* .while (ecx != CPU_LIST_TERMINAL)*/
+ je 4f
+ /* TODO - coreboot isn't checking for valid data.
+ * Ensure that the MSR address is valid for Fixed-Sized MTRRs */
+ /*.if ( ((ecx >= AMD_AP_MTRR_FIX4k_C0000) && (ecx <= AMD_AP_MTRR_FIX4k_F8000)) || \
+ (ecx == AMD_AP_MTRR_FIX64k_00000) || (ecx == AMD_AP_MTRR_FIX16k_80000 ) || \
+ (ecx == AMD_AP_MTRR_FIX16k_A0000))
+ */
+ mov 4(%esi), %eax /* MsrData */
+ mov 8(%esi), %edx /* MsrData */
+ wrmsr
+ /* .endif */
+ add $12, %esi /* sizeof (AP_MTRR_SETTINGS) */
+ jmp 5b /* .endw */
+ 4: /* .endif */
+
+ /* Enable fixed-range and variable-range MTRRs */
+ mov $AMD_MTRR_DEFTYPE, %ecx
+ rdmsr
+ bts $MTRR_DEF_TYPE_EN, %eax /* MtrrDefTypeEn */
+ bts $MTRR_DEF_TYPE_FIX_EN, %eax /* MtrrDefTypeFixEn */
+ wrmsr
+
+ /* Enable Top-of-Memory setting */
+ /* Enable use of RdMem/WrMem bits attributes */
+ mov $MTRR_SYS_CFG, %ecx
+ rdmsr
+ /* TODO: */
+ bts $MTRR_VAR_DRAM_EN, %eax /* Enable */
+ btr $MTRR_FIX_DRAM_MOD_EN, %eax /* Disable */
+ bts $MTRR_FIX_DRAM_EN, %eax /* Enable */
+ wrmsr
+
+ bts $FLAG_IS_PRIMARY, %esi
+ jmp 3f /* .else ; end if primary core */
+ 2:
+ xor %esi, %esi
+ 3: /* .endif*/
+
+ /* Make sure not to touch any Shared MSR from this point on */
+
+ AMD_DISABLE_STACK_FAMILY_HOOK
+
+ /* restore variable MTTR6 and MTTR7 to default states */
+ bt $FLAG_IS_PRIMARY, %esi /* .if (esi & 1h) */
+ jz 6f
+ movl $AMD_MTRR_VARIABLE_MASK7, %ecx /* clear MTRRPhysBase6 MTRRPhysMask6 */
+ xor %eax, %eax /* and MTRRPhysBase7 MTRRPhysMask7 */
+ xor %edx, %edx
+ cmp $AMD_MTRR_VARIABLE_BASE6, %ecx /* .while (cl < 010h) */
+ jl 6f
+ wrmsr
+ dec %ecx
+ 6: /* .endw */
+
+ xor %eax, %eax
+
+7:
+ cli
+ hlt
+ jmp 7b /* ExecuteHltInstruction */
+
+ .size ExecuteFinalHltInstruction, .-ExecuteFinalHltInstruction
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuApicUtilities.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuApicUtilities.c
new file mode 100644
index 0000000..ac824f3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuApicUtilities.c
@@ -0,0 +1,1453 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU APIC related utility functions.
+ *
+ * Contains code that provides mechanism to invoke and control APIC communication.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuCacheInit.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_CPUAPICUTILITIES_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+/* ApFlags bits */
+#define AP_TASK_HAS_INPUT 0x00000001ul
+#define AP_TASK_HAS_OUTPUT 0x00000002ul
+#define AP_RETURN_PARAMS 0x00000004ul
+#define AP_END_AT_HLT 0x00000008ul
+#define AP_PASS_EARLY_PARAMS 0x00000010ul
+
+#define XFER_ELEMENT_SIZE sizeof (UINT32)
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef VOID F_CPU_AMD_NMI_HANDLER (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+typedef F_CPU_AMD_NMI_HANDLER *PF_CPU_AMD_NMI_HANDLER;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+ApUtilSetupIdtForHlt (
+ IN IDT_DESCRIPTOR *NmiIdtDescPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+STATIC
+ApUtilRemoteRead (
+ IN UINT32 TargetApicId,
+ IN UINT8 RegAddr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+ApUtilLocalWrite (
+ IN UINT32 RegAddr,
+ IN UINT32 Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+STATIC
+ApUtilLocalRead (
+ IN UINT32 RegAddr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+ApUtilGetLocalApicBase (
+ OUT UINT64 *ApicBase,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+STATIC
+ApUtilCalculateUniqueId (
+ IN UINT8 Socket,
+ IN UINT8 Core,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+ApUtilFireDirectedNmi (
+ IN UINT32 TargetApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+ApUtilReceivePointer (
+ IN UINT32 TargetApicId,
+ OUT VOID **ReturnPointer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+ApUtilTransmitPointer (
+ IN UINT32 TargetApicId,
+ IN VOID **Pointer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+PerformFinalHalt (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LocalApicInitialization (
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+LocalApicInitializationAtEarly (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern
+VOID
+ExecuteHltInstruction (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+extern
+VOID
+NmiHandler (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+extern
+VOID
+ExecuteFinalHltInstruction (
+ IN UINT32 SharedCore,
+ IN AP_MTRR_SETTINGS *ApMtrrSettingsList,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+extern BUILD_OPT_CFG UserOptions;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initialize the Local APIC.
+ *
+ * This function determines and programs the appropriate APIC ID value
+ * for the executing core. This code must be run after HT initialization
+ * is complete.
+ *
+ * @param[in] CpuEarlyParamsPtr Service parameters.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+LocalApicInitialization (
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 CurrentCore;
+ UINT32 CurrentNodeNum;
+ UINT32 CoreIdBits;
+ UINT32 Mnc;
+ UINT32 ProcessorCount;
+ UINT32 ProcessorApicIndex;
+ UINT32 IoApicNum;
+ UINT32 StartLocalApicId;
+ UINT64 LocalApicBase;
+ UINT32 TempVar_a;
+ UINT64 MsrData;
+ UINT64 Address;
+ CPUID_DATA CpuidData;
+
+ // Local variables default values
+ IoApicNum = CpuEarlyParamsPtr->PlatformConfig.NumberOfIoApics;
+
+ GetCurrentCore (&CurrentCore, StdHeader);
+ GetCurrentNodeNum (&CurrentNodeNum, StdHeader);
+
+ // Get Mnc
+ LibAmdCpuidRead (AMD_CPUID_ASIZE_PCCOUNT, &CpuidData, StdHeader);
+ CoreIdBits = (CpuidData.ECX_Reg & 0x0000F000) >> 12;
+ Mnc = 1 << (CoreIdBits & 0x000F);
+
+ // Get ProcessorCount in the system
+ ProcessorCount = GetNumberOfProcessors (StdHeader);
+
+ // Get the APIC Index of this processor.
+ ProcessorApicIndex = GetProcessorApicIndex (CurrentNodeNum, StdHeader);
+
+ TempVar_a = (Mnc * ProcessorCount) + IoApicNum;
+ ASSERT (TempVar_a < 255);
+
+ // Apply apic enumeration rules
+ // For systems with >= 16 APICs, put the IO-APICs at 0..n and
+ // put the local-APICs at m..z
+ // For systems with < 16 APICs, put the Local-APICs at 0..n and
+ // put the IO-APICs at (n + 1)..z
+ // This is needed because many IO-APIC devices only have 4 bits
+ // for their APIC id and therefore must reside at 0..15
+ StartLocalApicId = 0;
+ if (TempVar_a >= 16) {
+ if (IoApicNum >= 1) {
+ StartLocalApicId = (IoApicNum - 1) / Mnc;
+ StartLocalApicId = (StartLocalApicId + 1) * Mnc;
+ }
+ }
+
+ // Set local apic id
+ TempVar_a = (ProcessorApicIndex * Mnc) + CurrentCore + StartLocalApicId;
+ IDS_HDT_CONSOLE (CPU_TRACE, " Node %d core %d APIC ID = 0x%x\n", CurrentNodeNum, CurrentCore, TempVar_a);
+ TempVar_a = TempVar_a << APIC20_ApicId;
+
+ // Enable local apic id
+ LibAmdMsrRead (MSR_APIC_BAR, &MsrData, StdHeader);
+ MsrData |= APIC_ENABLE_BIT;
+ LibAmdMsrWrite (MSR_APIC_BAR, &MsrData, StdHeader);
+
+ // Get local apic base Address
+ ApUtilGetLocalApicBase (&LocalApicBase, StdHeader);
+
+ Address = LocalApicBase + APIC_ID_REG;
+ LibAmdMemWrite (AccessWidth32, Address, &TempVar_a, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initialize the Local APIC at the AmdInitEarly entry point.
+ *
+ * This function acts as a wrapper for calling the LocalApicInitialization
+ * routine at AmdInitEarly.
+ *
+ * @param[in] FamilyServices The current Family Specific Services.
+ * @param[in] EarlyParams Service parameters.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+LocalApicInitializationAtEarly (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_TESTPOINT (TpProcCpuLocalApicInit, StdHeader);
+ LocalApicInitialization (EarlyParams, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for all APs in the system.
+ *
+ * This routine puts the AP cores in an infinite loop in which the cores
+ * will poll their masters, waiting to be told to perform a task. At early,
+ * all socket-relative core zeros will receive their tasks from the BSC.
+ * All others will receive their tasks from the core zero of their local
+ * processor. At the end of AmdInitEarly, all cores will switch to receiving
+ * their tasks from the BSC.
+ *
+ * @param[in] StdHeader Handle to config for library and services.
+ * @param[in] CpuEarlyParams AMD_CPU_EARLY_PARAMS pointer.
+ *
+ */
+VOID
+ApEntry (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ )
+{
+ UINT8 RemoteCmd;
+ UINT8 SourceSocket;
+ UINT8 CommandStart;
+ UINT32 ApFlags;
+ UINT32 FuncType;
+ UINT32 ReturnCode;
+ UINT32 CurrentSocket;
+ UINT32 CurrentCore;
+ UINT32 *InputDataPtr;
+ UINT32 BscSocket;
+ UINT32 Ignored;
+ UINT32 TargetApicId;
+ AP_FUNCTION_PTR FuncAddress;
+ IDT_DESCRIPTOR IdtDesc[32];
+ AP_DATA_TRANSFER DataTransferInfo;
+ AGESA_STATUS IgnoredSts;
+
+ ASSERT (!IsBsp (StdHeader, &IgnoredSts));
+
+ // Initialize local variables
+ ReturnCode = 0;
+ DataTransferInfo.DataTransferFlags = 0;
+ InputDataPtr = NULL;
+
+ // Determine the executing core's socket and core numbers
+ IdentifyCore (StdHeader, &CurrentSocket, &Ignored, &CurrentCore, &IgnoredSts);
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " Socket %d core %d begin AP tasking engine\n", CurrentSocket, CurrentCore);
+
+ // Determine the BSC's socket number
+ GetSocketModuleOfNode ((UINT32) 0x00000000, &BscSocket, &Ignored, StdHeader);
+
+ // Setup Interrupt Descriptor Table for sleep mode
+ ApUtilSetupIdtForHlt (&IdtDesc[2], StdHeader);
+
+ // Indicate to the BSC that we have reached the tasking engine
+ ApUtilWriteControlByte (CORE_IDLE, StdHeader);
+
+ if (CurrentCore == 0) {
+ // Core 0s receive their tasks from the BSC
+ SourceSocket = (UINT8) BscSocket;
+ } else {
+ // All non-zero cores receive their tasks from the core 0 of their socket
+ SourceSocket = (UINT8) CurrentSocket;
+ }
+
+ GetLocalApicIdForCore (SourceSocket, 0, &TargetApicId, StdHeader);
+
+ // Determine the unique value that the master will write when it has a task
+ // for this core to perform.
+ CommandStart = ApUtilCalculateUniqueId (
+ (UINT8)CurrentSocket,
+ (UINT8)CurrentCore,
+ StdHeader
+ );
+ for (;;) {
+ RemoteCmd = ApUtilReadRemoteControlByte (TargetApicId, StdHeader);
+ if (RemoteCmd == CommandStart) {
+ ApFlags = ApUtilReadRemoteDataDword (TargetApicId, StdHeader);
+
+ ApUtilReceivePointer (TargetApicId, (VOID **) &FuncAddress, StdHeader);
+
+ FuncType = ApFlags & (UINT32) (AP_TASK_HAS_INPUT | AP_TASK_HAS_OUTPUT | AP_PASS_EARLY_PARAMS);
+ if ((ApFlags & AP_TASK_HAS_INPUT) != 0) {
+ DataTransferInfo.DataSizeInDwords = 0;
+ DataTransferInfo.DataPtr = NULL;
+ DataTransferInfo.DataTransferFlags = 0;
+ if (ApUtilReceiveBuffer (SourceSocket, 0, &DataTransferInfo, StdHeader) == AGESA_ERROR) {
+ // There is not enough space to put the input data on the heap. Undefined behavior is about
+ // to result.
+ IDS_ERROR_TRAP;
+ }
+ InputDataPtr = (UINT32 *) DataTransferInfo.DataPtr;
+ }
+ ApUtilWriteControlByte (CORE_ACTIVE, StdHeader);
+ switch (FuncType) {
+ case 0:
+ FuncAddress.PfApTask (StdHeader);
+ break;
+ case AP_TASK_HAS_INPUT:
+ FuncAddress.PfApTaskI (InputDataPtr, StdHeader);
+ break;
+ case AP_PASS_EARLY_PARAMS:
+ FuncAddress.PfApTaskC (StdHeader, CpuEarlyParams);
+ break;
+ case (AP_TASK_HAS_INPUT | AP_PASS_EARLY_PARAMS):
+ FuncAddress.PfApTaskIC (InputDataPtr, StdHeader, CpuEarlyParams);
+ break;
+ case AP_TASK_HAS_OUTPUT:
+ ReturnCode = FuncAddress.PfApTaskO (StdHeader);
+ break;
+ case (AP_TASK_HAS_INPUT | AP_TASK_HAS_OUTPUT):
+ ReturnCode = FuncAddress.PfApTaskIO (InputDataPtr, StdHeader);
+ break;
+ case (AP_TASK_HAS_OUTPUT | AP_PASS_EARLY_PARAMS):
+ ReturnCode = FuncAddress.PfApTaskOC (StdHeader, CpuEarlyParams);
+ break;
+ case (AP_TASK_HAS_INPUT | AP_TASK_HAS_OUTPUT | AP_PASS_EARLY_PARAMS):
+ ReturnCode = FuncAddress.PfApTaskIOC (InputDataPtr, StdHeader, CpuEarlyParams);
+ break;
+ default:
+ ReturnCode = 0;
+ break;
+ }
+ if (((ApFlags & AP_RETURN_PARAMS) != 0)) {
+ ApUtilTransmitBuffer (SourceSocket, 0, &DataTransferInfo, StdHeader);
+ }
+ if ((ApFlags & AP_TASK_HAS_OUTPUT) != 0) {
+ ApUtilWriteDataDword (ReturnCode, StdHeader);
+ }
+ if ((ApFlags & AP_END_AT_HLT) != 0) {
+ RemoteCmd = CORE_IDLE_HLT;
+ } else {
+ ApUtilWriteControlByte (CORE_IDLE, StdHeader);
+ }
+ }
+ if (RemoteCmd == CORE_IDLE_HLT) {
+ SourceSocket = (UINT8) BscSocket;
+ GetLocalApicIdForCore (SourceSocket, 0, &TargetApicId, StdHeader);
+ ApUtilWriteControlByte (CORE_IDLE_HLT, StdHeader);
+ ExecuteHltInstruction (StdHeader);
+ ApUtilWriteControlByte (CORE_IDLE, StdHeader);
+ }
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Reads the 'control byte' on the designated remote core.
+ *
+ * This function will read the current contents of the control byte
+ * on the designated core using the APIC remote read inter-
+ * processor interrupt sequence.
+ *
+ * @param[in] TargetApicId Local APIC ID of the desired core
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ * @return The current value of the remote cores control byte
+ *
+ */
+UINT8
+ApUtilReadRemoteControlByte (
+ IN UINT32 TargetApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 ControlByte;
+ UINT32 ApicRegister;
+
+ ApicRegister = ApUtilRemoteRead (TargetApicId, APIC_CTRL_DWORD, StdHeader);
+ ControlByte = (UINT8) ((ApicRegister & APIC_CTRL_MASK) >> APIC_CTRL_SHIFT);
+ return (ControlByte);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Writes the 'control byte' on the executing core.
+ *
+ * This function writes data to a local APIC offset used in inter-
+ * processor communication.
+ *
+ * @param[in] Value
+ * @param[in] StdHeader
+ *
+ */
+VOID
+ApUtilWriteControlByte (
+ IN UINT8 Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 ApicRegister;
+
+ ApicRegister = ApUtilLocalRead (APIC_CTRL_REG, StdHeader);
+ ApicRegister = ((ApicRegister & ~APIC_CTRL_MASK) | (UINT32) (Value << APIC_CTRL_SHIFT));
+ ApUtilLocalWrite (APIC_CTRL_REG, ApicRegister, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Reads the 'data dword' on the designated remote core.
+ *
+ * This function will read the current contents of the data dword
+ * on the designated core using the APIC remote read inter-
+ * processor interrupt sequence.
+ *
+ * @param[in] TargetApicId Local APIC ID of the desired core
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ * @return The current value of the remote core's data dword
+ *
+ */
+UINT32
+ApUtilReadRemoteDataDword (
+ IN UINT32 TargetApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return (ApUtilRemoteRead (TargetApicId, APIC_DATA_DWORD, StdHeader));
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Writes the 'data dword' on the executing core.
+ *
+ * This function writes data to a local APIC offset used in inter-
+ * processor communication.
+ *
+ * @param[in] Value Value to write
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ */
+VOID
+ApUtilWriteDataDword (
+ IN UINT32 Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ ApUtilLocalWrite (APIC_DATA_REG, Value, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Runs the given task on the specified local core.
+ *
+ * This function is used to invoke an AP to run a specified AGESA
+ * procedure. It can only be called by cores that have subordinate
+ * APs -- the BSC at POST, or any socket-relative core 0s at Early.
+ *
+ * @param[in] Socket Socket number of the target core
+ * @param[in] Core Core number of the target core
+ * @param[in] TaskPtr Function descriptor
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ * @return Return value of the task that the AP core ran,
+ * or zero if the task was VOID.
+ *
+ */
+UINT32
+ApUtilRunCodeOnSocketCore (
+ IN UINT8 Socket,
+ IN UINT8 Core,
+ IN AP_TASK *TaskPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 CoreId;
+ UINT8 CurrentStatus;
+ UINT8 WaitStatus[3];
+ UINT32 ApFlags;
+ UINT32 ReturnCode;
+ UINT32 TargetApicId;
+ AP_WAIT_FOR_STATUS WaitForStatus;
+
+ ApFlags = 0;
+ ReturnCode = 0;
+
+ CoreId = ApUtilCalculateUniqueId (Socket, Core, StdHeader);
+
+ GetLocalApicIdForCore (Socket, Core, &TargetApicId, StdHeader);
+
+ if (TaskPtr->DataTransfer.DataSizeInDwords != 0) {
+ ApFlags |= AP_TASK_HAS_INPUT;
+ if (((TaskPtr->ExeFlags & RETURN_PARAMS) != 0) &&
+ ((TaskPtr->DataTransfer.DataTransferFlags & DATA_IN_MEMORY) == 0)) {
+ ApFlags |= AP_RETURN_PARAMS;
+ }
+ }
+
+ if ((TaskPtr->ExeFlags & TASK_HAS_OUTPUT) != 0) {
+ ApFlags |= AP_TASK_HAS_OUTPUT;
+ }
+
+ if ((TaskPtr->ExeFlags & END_AT_HLT) != 0) {
+ ApFlags |= AP_END_AT_HLT;
+ }
+
+ if ((TaskPtr->ExeFlags & PASS_EARLY_PARAMS) != 0) {
+ ApFlags |= AP_PASS_EARLY_PARAMS;
+ }
+
+ WaitStatus[0] = CORE_IDLE;
+ WaitStatus[1] = CORE_IDLE_HLT;
+ WaitStatus[2] = CORE_UNAVAILABLE;
+ WaitForStatus.Status = WaitStatus;
+ WaitForStatus.NumberOfElements = 3;
+ WaitForStatus.RetryCount = WAIT_INFINITELY;
+ WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+ CurrentStatus = ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+
+ if (CurrentStatus != CORE_UNAVAILABLE) {
+ ApUtilWriteDataDword (ApFlags, StdHeader);
+ ApUtilWriteControlByte (CoreId, StdHeader);
+
+ if (CurrentStatus == CORE_IDLE_HLT) {
+ ApUtilFireDirectedNmi (TargetApicId, StdHeader);
+ }
+
+ ApUtilTransmitPointer (TargetApicId, (VOID **) &TaskPtr->FuncAddress, StdHeader);
+
+ if ((ApFlags & AP_TASK_HAS_INPUT) != 0) {
+ ApUtilTransmitBuffer (Socket, Core, &TaskPtr->DataTransfer, StdHeader);
+ }
+
+ if ((TaskPtr->ExeFlags & WAIT_FOR_CORE) != 0) {
+ if (((ApFlags & AP_TASK_HAS_INPUT) != 0) &&
+ ((ApFlags & AP_RETURN_PARAMS) != 0) &&
+ ((TaskPtr->DataTransfer.DataTransferFlags & DATA_IN_MEMORY) == 0)) {
+ if (ApUtilReceiveBuffer (Socket, Core, &TaskPtr->DataTransfer, StdHeader) == AGESA_ERROR) {
+ // There is not enough space to put the return data. This should never occur. If it
+ // does, this would point to strange heap corruption.
+ IDS_ERROR_TRAP;
+ }
+ }
+
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ if ((ApFlags & AP_TASK_HAS_OUTPUT) != 0) {
+ ReturnCode = ApUtilReadRemoteDataDword (TargetApicId, StdHeader);
+ }
+ }
+ } else {
+ ReturnCode = 0;
+ }
+ return (ReturnCode);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Waits for a remote core's control byte value to either be equal or
+ * not equal to any number of specified values.
+ *
+ * This function will loop doing remote read IPIs until the remote core's
+ * control byte becomes one of the values in the input array if the input
+ * flags are set for equality. Otherwise, the loop will continue until
+ * the control byte value is not equal to one of the elements in the
+ * array. The caller can also specify an iteration count for timeout
+ * purposes.
+ *
+ * @param[in] TargetApicId Local APIC ID of the desired core
+ * @param[in] WaitParamsPtr Wait parameter structure
+ * @param[in] StdHeader Configuration parameteres pointer
+ *
+ * @return The current value of the remote core's control byte
+ *
+ */
+UINT8
+ApUtilWaitForCoreStatus (
+ IN UINT32 TargetApicId,
+ IN AP_WAIT_FOR_STATUS *WaitParamsPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BOOLEAN IsEqual;
+ UINT8 CoreStatus;
+ UINT8 i;
+ UINT8 j;
+
+ CoreStatus = 0;
+ for (i = 0; (WaitParamsPtr->RetryCount == WAIT_INFINITELY) ||
+ (i < WaitParamsPtr->RetryCount); ++i) {
+ CoreStatus = ApUtilReadRemoteControlByte (TargetApicId, StdHeader);
+ // Determine whether or not the current remote status is equal
+ // to an element in the array.
+ IsEqual = FALSE;
+ for (j = 0; !IsEqual && j < WaitParamsPtr->NumberOfElements; ++j) {
+ if (CoreStatus == WaitParamsPtr->Status[j]) {
+ IsEqual = TRUE;
+ }
+ }
+ if ((((WaitParamsPtr->WaitForStatusFlags & WAIT_STATUS_EQUALITY) != 0) && IsEqual) ||
+ (((WaitParamsPtr->WaitForStatusFlags & WAIT_STATUS_EQUALITY) == 0) && !IsEqual)) {
+ break;
+ }
+ }
+ return (CoreStatus);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Runs the AP task on the executing core.
+ *
+ * @param[in] TaskPtr Function descriptor
+ * @param[in] StdHeader Configuration parameters pointer
+ * @param[in] ConfigParams Entry point CPU parameters pointer
+ *
+ * @return Return value of the task, or zero if the task
+ * was VOID.
+ *
+ */
+UINT32
+ApUtilTaskOnExecutingCore (
+ IN AP_TASK *TaskPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN VOID *ConfigParams
+ )
+{
+ UINT32 InvocationOptions;
+ UINT32 ReturnCode;
+
+ ReturnCode = 0;
+ InvocationOptions = 0;
+
+ if (TaskPtr->DataTransfer.DataSizeInDwords != 0) {
+ InvocationOptions |= AP_TASK_HAS_INPUT;
+ }
+ if ((TaskPtr->ExeFlags & TASK_HAS_OUTPUT) != 0) {
+ InvocationOptions |= AP_TASK_HAS_OUTPUT;
+ }
+ if ((TaskPtr->ExeFlags & PASS_EARLY_PARAMS) != 0) {
+ InvocationOptions |= AP_PASS_EARLY_PARAMS;
+ }
+
+ switch (InvocationOptions) {
+ case 0:
+ TaskPtr->FuncAddress.PfApTask (StdHeader);
+ break;
+ case AP_TASK_HAS_INPUT:
+ TaskPtr->FuncAddress.PfApTaskI (TaskPtr->DataTransfer.DataPtr, StdHeader);
+ break;
+ case AP_PASS_EARLY_PARAMS:
+ TaskPtr->FuncAddress.PfApTaskC (StdHeader, ConfigParams);
+ break;
+ case (AP_TASK_HAS_INPUT | AP_PASS_EARLY_PARAMS):
+ TaskPtr->FuncAddress.PfApTaskIC (TaskPtr->DataTransfer.DataPtr, StdHeader, ConfigParams);
+ break;
+ case AP_TASK_HAS_OUTPUT:
+ ReturnCode = TaskPtr->FuncAddress.PfApTaskO (StdHeader);
+ break;
+ case (AP_TASK_HAS_INPUT | AP_TASK_HAS_OUTPUT):
+ ReturnCode = TaskPtr->FuncAddress.PfApTaskIO (TaskPtr->DataTransfer.DataPtr, StdHeader);
+ break;
+ case (AP_TASK_HAS_OUTPUT | AP_PASS_EARLY_PARAMS):
+ ReturnCode = TaskPtr->FuncAddress.PfApTaskOC (StdHeader, ConfigParams);
+ break;
+ case (AP_TASK_HAS_INPUT | AP_TASK_HAS_OUTPUT | AP_PASS_EARLY_PARAMS):
+ ReturnCode = TaskPtr->FuncAddress.PfApTaskIOC (TaskPtr->DataTransfer.DataPtr, StdHeader, ConfigParams);
+ break;
+ default:
+ ReturnCode = 0;
+ break;
+ }
+ return (ReturnCode);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Sets up the AP's IDT with NMI (INT2) being the only valid descriptor
+ *
+ * This function prepares the executing AP core for recovering from a hlt
+ * instruction by initializing its IDTR.
+ *
+ * @param[in] NmiIdtDescPtr Pointer to a writable IDT entry to
+ * be used for NMIs
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ */
+VOID
+STATIC
+ApUtilSetupIdtForHlt (
+ IN IDT_DESCRIPTOR *NmiIdtDescPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 DescSize;
+ UINT64 HandlerOffset;
+ UINT64 EferRegister;
+ IDT_BASE_LIMIT IdtInfo;
+
+ LibAmdMsrRead (MSR_EXTENDED_FEATURE_EN, &EferRegister, StdHeader);
+ if ((EferRegister & 0x100) != 0) {
+ DescSize = 16;
+ } else {
+ DescSize = 8;
+ }
+
+ HandlerOffset = (UINT64) (UINTN) NmiHandler;
+ NmiIdtDescPtr->OffsetLo = (UINT16) HandlerOffset & 0xFFFF;
+ NmiIdtDescPtr->OffsetHi = (UINT16) (HandlerOffset >> 16);
+ GetCsSelector (&NmiIdtDescPtr->Selector, StdHeader);
+ NmiIdtDescPtr->Flags = IDT_DESC_PRESENT | IDT_DESC_TYPE_INT32;
+ NmiIdtDescPtr->Rsvd = 0;
+ NmiIdtDescPtr->Offset64 = (UINT32) (HandlerOffset >> 32);
+ NmiIdtDescPtr->Rsvd64 = 0;
+ IdtInfo.Limit = (UINT16) ((DescSize * 3) - 1);
+ IdtInfo.Base = (UINT64) (UINTN) NmiIdtDescPtr - (DescSize * 2);
+ IDS_EXCEPTION_TRAP (IDS_IDT_UPDATE_EXCEPTION_VECTOR_FOR_AP, &IdtInfo, StdHeader);
+ SetIdtr (&IdtInfo , StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Calculate the APIC ID for a given core.
+ *
+ * Get the current node's apic id and deconstruct it to the base id of local apic id space.
+ * Then construct the target's apic id using that base.
+ * @b Assumes: The target Socket and Core exist!
+ * Other Notes:
+ * - Must run after HT initialization is complete.
+ * - Code sync: This calculation MUST match the assignment
+ * calculation done above in LocalApicInitializationAtEarly function.
+ * - Assumes family homogeneous population of all sockets.
+ *
+ * @param[in] TargetSocket The socket in which the Core's Processor is installed.
+ * @param[in] TargetCore The Core on that Processor
+ * @param[out] LocalApicId Its APIC Id
+ * @param[in] StdHeader Handle to header for library and services.
+ *
+ */
+VOID
+GetLocalApicIdForCore (
+ IN UINT32 TargetSocket,
+ IN UINT32 TargetCore,
+ OUT UINT32 *LocalApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 CoreIdBits;
+ UINT32 CurrentNode;
+ UINT32 CurrentCore;
+ UINT32 TargetNode;
+ UINT32 MaxCoresInProcessor;
+ UINT32 TotalCores;
+ UINT32 CurrentLocalApicId;
+ UINT64 LocalApicBase;
+ UINT32 TempVar_a;
+ UINT64 Address;
+ UINT32 ProcessorApicIndex;
+ BOOLEAN ReturnResult;
+ CPUID_DATA CpuidData;
+
+ TargetNode = 0;
+
+ // Get local apic base Address
+ ApUtilGetLocalApicBase (&LocalApicBase, StdHeader);
+ Address = LocalApicBase + APIC_ID_REG;
+
+ LibAmdMemRead (AccessWidth32, Address, &TempVar_a, StdHeader);
+
+ // ApicId [7:0]
+ CurrentLocalApicId = (TempVar_a >> APIC20_ApicId) & 0x000000FF;
+
+ GetCurrentNodeAndCore (&CurrentNode, &CurrentCore, StdHeader);
+ LibAmdCpuidRead (AMD_CPUID_ASIZE_PCCOUNT, &CpuidData, StdHeader);
+ CoreIdBits = (CpuidData.ECX_Reg & 0x0000F000) >> 12;
+ MaxCoresInProcessor = (1 << CoreIdBits);
+
+ // Get the APIC Index of this processor.
+ ProcessorApicIndex = GetProcessorApicIndex (CurrentNode, StdHeader);
+
+ TotalCores = (MaxCoresInProcessor * ProcessorApicIndex) + CurrentCore;
+ CurrentLocalApicId -= TotalCores;
+
+ // Use the Node Id of TargetSocket, Module 0. No socket transitions are missed or added,
+ // even if the TargetCore is not on Module 0 in that processor and that's all that matters now.
+ ReturnResult = GetNodeId (TargetSocket, 0, (UINT8 *)&TargetNode, StdHeader);
+ ASSERT (ReturnResult);
+
+ // Get the APIC Index of this processor.
+ ProcessorApicIndex = GetProcessorApicIndex (TargetNode, StdHeader);
+
+ CurrentLocalApicId += ((MaxCoresInProcessor * ProcessorApicIndex) + TargetCore);
+ *LocalApicId = CurrentLocalApicId;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Securely passes a buffer to the designated remote core.
+ *
+ * This function uses a sequence of remote reads to transmit a data
+ * buffer, one UINT32 at a time.
+ *
+ * @param[in] Socket Socket number of the remote core
+ * @param[in] Core Core number of the remote core
+ * @param[in] BufferInfo Information about the buffer to pass, and
+ * how to pass it
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ */
+VOID
+ApUtilTransmitBuffer (
+ IN UINT8 Socket,
+ IN UINT8 Core,
+ IN AP_DATA_TRANSFER *BufferInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 TargetCore;
+ UINT8 MyUniqueId;
+ UINT8 CurrentStatus;
+ UINT32 *CurrentPtr;
+ UINT32 i;
+ UINT32 MyCore;
+ UINT32 MySocket;
+ UINT32 Ignored;
+ UINT32 TargetApicId;
+ AP_WAIT_FOR_STATUS WaitForStatus;
+ AGESA_STATUS IgnoredSts;
+
+ GetLocalApicIdForCore ((UINT32) Socket, (UINT32) Core, &TargetApicId, StdHeader);
+
+ if ((BufferInfo->DataTransferFlags & DATA_IN_MEMORY) != 0) {
+ ApUtilWriteDataDword ((UINT32) 0x00000000, StdHeader);
+ } else {
+ ApUtilWriteDataDword ((UINT32) BufferInfo->DataSizeInDwords, StdHeader);
+ }
+ TargetCore = ApUtilCalculateUniqueId (Socket, Core, StdHeader);
+
+ ApUtilWriteControlByte (TargetCore, StdHeader);
+
+ IdentifyCore (StdHeader, &MySocket, &Ignored, &MyCore, &IgnoredSts);
+
+ MyUniqueId = ApUtilCalculateUniqueId ((UINT8)MySocket, (UINT8)MyCore, StdHeader);
+
+ WaitForStatus.Status = &MyUniqueId;
+ WaitForStatus.NumberOfElements = 1;
+ WaitForStatus.RetryCount = WAIT_INFINITELY;
+ WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ ApUtilWriteDataDword (BufferInfo->DataTransferFlags, StdHeader);
+
+ ApUtilWriteControlByte (CORE_DATA_FLAGS_READY, StdHeader);
+ WaitForStatus.WaitForStatusFlags = 0;
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ if ((BufferInfo->DataTransferFlags & DATA_IN_MEMORY) != 0) {
+ ApUtilTransmitPointer (TargetApicId, (VOID **) &BufferInfo->DataPtr, StdHeader);
+ } else {
+ ApUtilWriteControlByte (CORE_STS_DATA_READY_1, StdHeader);
+ CurrentStatus = CORE_STS_DATA_READY_0;
+ WaitForStatus.Status = &CurrentStatus;
+ WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ WaitForStatus.WaitForStatusFlags = 0;
+ CurrentPtr = (UINT32 *) BufferInfo->DataPtr;
+ for (i = 0; i < BufferInfo->DataSizeInDwords; ++i) {
+ ApUtilWriteDataDword (*CurrentPtr++, StdHeader);
+ ApUtilWriteControlByte (CurrentStatus, StdHeader);
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ CurrentStatus ^= 0x01;
+ }
+ }
+ ApUtilWriteControlByte (CORE_ACTIVE, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Securely receives a buffer from the designated remote core.
+ *
+ * This function uses a sequence of remote reads to receive a data
+ * buffer, one UINT32 at a time.
+ *
+ * @param[in] Socket Socket number of the remote core
+ * @param[in] Core Core number of the remote core
+ * @param[in] BufferInfo Information about where to place the buffer
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ * @retval AGESA_SUCCESS Transaction was successful
+ * @retval AGESA_ALERT The non-NULL desired location to place
+ * the buffer was not used as the buffer
+ * resides in a shared memory space. The
+ * input data pointer has changed.
+ * @retval AGESA_ERROR There is not enough room to receive the
+ * buffer.
+ *
+ */
+AGESA_STATUS
+ApUtilReceiveBuffer (
+ IN UINT8 Socket,
+ IN UINT8 Core,
+ IN OUT AP_DATA_TRANSFER *BufferInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 MyUniqueId;
+ UINT8 SourceUniqueId;
+ UINT8 CurrentStatus;
+ UINT32 i;
+ UINT32 MySocket;
+ UINT32 MyCore;
+ UINT32 Ignored;
+ UINT32 *CurrentPtr;
+ UINT32 TransactionSize;
+ UINT32 TargetApicId;
+ AGESA_STATUS ReturnStatus;
+ ALLOCATE_HEAP_PARAMS HeapMalloc;
+ AP_WAIT_FOR_STATUS WaitForStatus;
+
+ ReturnStatus = AGESA_SUCCESS;
+ IdentifyCore (StdHeader, &MySocket, &Ignored, &MyCore, &ReturnStatus);
+
+ MyUniqueId = ApUtilCalculateUniqueId ((UINT8)MySocket, (UINT8)MyCore, StdHeader);
+
+ GetLocalApicIdForCore ((UINT32) Socket, (UINT32) Core, &TargetApicId, StdHeader);
+
+ WaitForStatus.Status = &MyUniqueId;
+ WaitForStatus.NumberOfElements = 1;
+ WaitForStatus.RetryCount = WAIT_INFINITELY;
+ WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ TransactionSize = ApUtilReadRemoteDataDword (TargetApicId, StdHeader);
+
+ if (BufferInfo->DataPtr == NULL && TransactionSize != 0) {
+ HeapMalloc.BufferHandle = AMD_CPU_AP_TASKING_HANDLE;
+ HeapMalloc.Persist = HEAP_LOCAL_CACHE;
+ // Deallocate the general purpose heap structure, if it exists. Ignore
+ // the status in case it does not exist.
+ HeapDeallocateBuffer (HeapMalloc.BufferHandle, StdHeader);
+ HeapMalloc.RequestedBufferSize = (TransactionSize * XFER_ELEMENT_SIZE);
+ if (HeapAllocateBuffer (&HeapMalloc, StdHeader) == AGESA_SUCCESS) {
+ BufferInfo->DataPtr = (UINT32 *) HeapMalloc.BufferPtr;
+ BufferInfo->DataSizeInDwords = (UINT16) (HeapMalloc.RequestedBufferSize / XFER_ELEMENT_SIZE);
+ } else {
+ BufferInfo->DataSizeInDwords = 0;
+ }
+ }
+
+ if (TransactionSize <= BufferInfo->DataSizeInDwords) {
+ SourceUniqueId = ApUtilCalculateUniqueId (Socket, Core, StdHeader);
+ ApUtilWriteControlByte (SourceUniqueId, StdHeader);
+ CurrentStatus = CORE_DATA_FLAGS_READY;
+ WaitForStatus.Status = &CurrentStatus;
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ BufferInfo->DataTransferFlags = ApUtilReadRemoteDataDword (TargetApicId, StdHeader);
+ ApUtilWriteControlByte (CORE_DATA_FLAGS_ACKNOWLEDGE, StdHeader);
+ if ((BufferInfo->DataTransferFlags & DATA_IN_MEMORY) != 0) {
+ if (BufferInfo->DataPtr != NULL) {
+ ReturnStatus = AGESA_ALERT;
+ }
+ ApUtilReceivePointer (TargetApicId, (VOID **) &BufferInfo->DataPtr, StdHeader);
+ } else {
+ CurrentStatus = CORE_STS_DATA_READY_1;
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ CurrentStatus = CORE_STS_DATA_READY_0;
+ ApUtilWriteControlByte (CurrentStatus, StdHeader);
+ CurrentPtr = BufferInfo->DataPtr;
+ for (i = 0; i < TransactionSize; ++i) {
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ *CurrentPtr++ = ApUtilReadRemoteDataDword (TargetApicId, StdHeader);
+ CurrentStatus ^= 0x01;
+ ApUtilWriteControlByte (CurrentStatus, StdHeader);
+ }
+ }
+ ApUtilWriteControlByte (CORE_ACTIVE, StdHeader);
+ } else {
+ BufferInfo->DataSizeInDwords = (UINT16) TransactionSize;
+ ReturnStatus = AGESA_ERROR;
+ }
+ return (ReturnStatus);
+}
+
+
+VOID
+RelinquishControlOfAllAPs (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 BscSocket;
+ UINT32 Ignored;
+ UINT32 BscCoreNum;
+ UINT32 Core;
+ UINT32 Socket;
+ UINT32 NumberOfSockets;
+ AP_TASK TaskPtr;
+ AGESA_STATUS IgnoredSts;
+
+ ASSERT (IsBsp (StdHeader, &IgnoredSts));
+
+ TaskPtr.FuncAddress.PfApTask = PerformFinalHalt;
+ TaskPtr.DataTransfer.DataSizeInDwords = 0;
+ TaskPtr.ExeFlags = WAIT_FOR_CORE;
+
+ IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (GetActiveCoresInGivenSocket (Socket, &Core, StdHeader)) {
+ while (Core-- > 0) {
+ if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+ ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+ }
+ }
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * The last AGESA code that an AP performs
+ *
+ * This function, run only by APs, breaks down their cache subsystem, sets up
+ * for memory to be present upon wake (from IBV Init/Startup IPIs), and halts.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+VOID
+STATIC
+PerformFinalHalt (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 PrimaryCore;
+ UINT32 HaltFlags;
+ UINT32 CacheEnDis;
+ CPU_SPECIFIC_SERVICES *FamilyServices;
+ CONST CACHE_INFO *CacheInfoPtr;
+ UINT8 NumberOfElements;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+ // CacheEnDis is a family specific flag, that lets the code to decide whether to
+ // keep the cache control bits set or cleared.
+ CacheEnDis = FamilyServices->InitCacheDisabled;
+
+ // Determine if the current core has the primary core role. The first core to execute
+ // in each compute unit has the primary role.
+ PrimaryCore = (UINT32) IsCoreComputeUnitPrimary (FirstCoreIsComputeUnitPrimary, StdHeader);
+
+ // If the core is not PrimaryCore, check if VarMTRRs are not shared among cores in a compute unit,
+ // low 32bits of VarMTRR mask is 0xFFFFFFFF. Treat each AP as primary core for setting MTRRs.
+ if (PrimaryCore != TRUE) {
+ FamilyServices->GetCacheInfo (FamilyServices, (CONST VOID **) &CacheInfoPtr, &NumberOfElements, StdHeader);
+ if (((UINT32) CacheInfoPtr->VariableMtrrHeapMask) == 0xFFFFFFFF) {
+ PrimaryCore = TRUE;
+ }
+ }
+
+ // Aggregate the flags for the halt service.
+ HaltFlags = PrimaryCore | (CacheEnDis << 1);
+
+ ApUtilWriteControlByte (CORE_UNAVAILABLE, StdHeader);
+ ExecuteFinalHltInstruction (HaltFlags, UserOptions.CfgApMtrrSettingsList, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Reads the APIC register on the designated remote core.
+ *
+ * This function uses the remote read inter-processor interrupt protocol
+ * to read an APIC register from the remote core
+ *
+ * @param[in] TargetApicId Local APIC ID of the desired core
+ * @param[in] RegAddr APIC register to read
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ * @return The current value of the remote core's desired APIC register
+ *
+ */
+UINT32
+STATIC
+ApUtilRemoteRead (
+ IN UINT32 TargetApicId,
+ IN UINT8 RegAddr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 ApicRegister;
+ UINT64 ApicBase;
+ UINT64 ApicAddr;
+
+ ApUtilGetLocalApicBase (&ApicBase, StdHeader);
+ TargetApicId <<= LOCAL_APIC_ID;
+
+ do {
+ ApicAddr = ApicBase + APIC_CMD_HI_REG;
+ LibAmdMemWrite (AccessWidth32, ApicAddr, &TargetApicId, StdHeader);
+ ApicAddr = ApicBase + APIC_CMD_LO_REG;
+ ApicRegister = CMD_REG_TO_READ | (UINT32) RegAddr;
+ LibAmdMemWrite (AccessWidth32, ApicAddr, &ApicRegister, StdHeader);
+ do {
+ LibAmdMemRead (AccessWidth32, ApicAddr, &ApicRegister, StdHeader);
+ } while ((ApicRegister & CMD_REG_DELIVERY_STATUS) != 0);
+ while ((ApicRegister & CMD_REG_REMOTE_RD_STS_MSK) == CMD_REG_REMOTE_DELIVERY_PENDING) {
+ LibAmdMemRead (AccessWidth32, ApicAddr, &ApicRegister, StdHeader);
+ }
+ } while ((ApicRegister & CMD_REG_REMOTE_RD_STS_MSK) != CMD_REG_REMOTE_DELIVERY_DONE);
+ ApicAddr = ApicBase + APIC_REMOTE_READ_REG;
+ LibAmdMemRead (AccessWidth32, ApicAddr, &ApicRegister, StdHeader);
+ return (ApicRegister);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Writes an APIC register on the executing core.
+ *
+ * This function gets the base address of the executing core's local APIC,
+ * and writes a UINT32 value to a specified offset.
+ *
+ * @param[in] RegAddr APIC register to write to
+ * @param[in] Value Data to be written to the desired APIC register
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ */
+VOID
+STATIC
+ApUtilLocalWrite (
+ IN UINT32 RegAddr,
+ IN UINT32 Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 ApicAddr;
+
+ ApUtilGetLocalApicBase (&ApicAddr, StdHeader);
+ ApicAddr += RegAddr;
+
+ LibAmdMemWrite (AccessWidth32, ApicAddr, &Value, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Reads an APIC register on the executing core.
+ *
+ * This function gets the base address of the executing core's local APIC,
+ * and reads a UINT32 value from a specified offset.
+ *
+ * @param[in] RegAddr APIC register to read from
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ * @return The current value of the local APIC register
+ *
+ */
+UINT32
+STATIC
+ApUtilLocalRead (
+ IN UINT32 RegAddr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 ApicRegister;
+ UINT64 ApicAddr;
+
+ ApUtilGetLocalApicBase (&ApicAddr, StdHeader);
+ ApicAddr += RegAddr;
+ LibAmdMemRead (AccessWidth32, ApicAddr, &ApicRegister, StdHeader);
+
+ return (ApicRegister);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the 64-bit base address of the executing core's local APIC.
+ *
+ * This function reads the APICBASE MSR and isolates the programmed address.
+ *
+ * @param[out] ApicBase Base address
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ */
+VOID
+STATIC
+ApUtilGetLocalApicBase (
+ OUT UINT64 *ApicBase,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ LibAmdMsrRead (MSR_APIC_BAR, ApicBase, StdHeader);
+ *ApicBase &= LAPIC_BASE_ADDR_MASK;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determines the unique ID of the input Socket/Core.
+ *
+ * This routine converts a socket-core combination to to a number
+ * that will be used to directly address a particular core. This
+ * unique value must be less than 128 because we only have a byte
+ * to use for status. APIC IDs are not guaranteed to be below
+ * 128.
+ *
+ * @param[in] Socket Socket number of the remote core
+ * @param[in] Core Core number of the remote core
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ * @return The unique ID of the desired core
+ *
+ */
+UINT8
+STATIC
+ApUtilCalculateUniqueId (
+ IN UINT8 Socket,
+ IN UINT8 Core,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 UniqueId;
+
+ UniqueId = ((Core << 3) | Socket);
+ ASSERT ((UniqueId & 0x80) == 0);
+ return (UniqueId);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Wakes up a core from the halted state.
+ *
+ * This function sends a directed NMI inter-processor interrupt to
+ * the input Socket/Core.
+ *
+ * @param[in] TargetApicId Local APIC ID of the desired core
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ */
+VOID
+STATIC
+ApUtilFireDirectedNmi (
+ IN UINT32 TargetApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ TargetApicId <<= LOCAL_APIC_ID;
+
+ ApUtilLocalWrite ((UINT32) APIC_CMD_HI_REG, TargetApicId, StdHeader);
+ ApUtilLocalWrite ((UINT32) APIC_CMD_LO_REG, (UINT32) CMD_REG_TO_NMI, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Securely receives a pointer from the designated remote core.
+ *
+ * This function uses a sequence of remote reads to receive a pointer,
+ * one UINT32 at a time.
+ *
+ * @param[in] TargetApicId Local APIC ID of the desired core
+ * @param[out] ReturnPointer Pointer passed from remote core
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ */
+VOID
+STATIC
+ApUtilReceivePointer (
+ IN UINT32 TargetApicId,
+ OUT VOID **ReturnPointer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+ UINT8 WaitStatus;
+ UINT32 *AddressScratchPtr;
+ AP_WAIT_FOR_STATUS WaitForStatus;
+
+ WaitStatus = CORE_STS_DATA_READY_0;
+ WaitForStatus.Status = &WaitStatus;
+ WaitForStatus.NumberOfElements = 1;
+ WaitForStatus.RetryCount = WAIT_INFINITELY;
+ AddressScratchPtr = (UINT32 *) ReturnPointer;
+ for (i = 0; i < SIZE_IN_DWORDS (AddressScratchPtr); ++i) {
+ ApUtilWriteControlByte (CORE_NEEDS_PTR, StdHeader);
+ WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ *AddressScratchPtr++ = ApUtilReadRemoteDataDword (TargetApicId, StdHeader);
+ ApUtilWriteControlByte (CORE_ACTIVE, StdHeader);
+ WaitForStatus.WaitForStatusFlags = 0;
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Securely transmits a pointer to the designated remote core.
+ *
+ * This function uses a sequence of remote reads to transmit a pointer,
+ * one UINT32 at a time.
+ *
+ * @param[in] TargetApicId Local APIC ID of the desired core
+ * @param[out] Pointer Pointer passed from remote core
+ * @param[in] StdHeader Configuration parameters pointer
+ *
+ */
+VOID
+STATIC
+ApUtilTransmitPointer (
+ IN UINT32 TargetApicId,
+ IN VOID **Pointer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+ UINT8 WaitStatus;
+ UINT32 *AddressScratchPtr;
+ AP_WAIT_FOR_STATUS WaitForStatus;
+
+ WaitStatus = CORE_NEEDS_PTR;
+ WaitForStatus.Status = &WaitStatus;
+ WaitForStatus.NumberOfElements = 1;
+ WaitForStatus.RetryCount = WAIT_INFINITELY;
+
+ AddressScratchPtr = (UINT32 *) Pointer;
+
+ for (i = 0; i < SIZE_IN_DWORDS (AddressScratchPtr); i++) {
+ WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ ApUtilWriteDataDword (*AddressScratchPtr++, StdHeader);
+ ApUtilWriteControlByte (CORE_STS_DATA_READY_0, StdHeader);
+ WaitForStatus.WaitForStatusFlags = 0;
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ ApUtilWriteControlByte (CORE_ACTIVE, StdHeader);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuApicUtilities.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuApicUtilities.h
new file mode 100644
index 0000000..ee1a564
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuApicUtilities.h
@@ -0,0 +1,303 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU APIC related utility functions and structures
+ *
+ * Contains code that provides mechanism to invoke and control APIC communication.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_APIC_UTILITIES_H_
+#define _CPU_APIC_UTILITIES_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+#define APIC_CTRL_DWORD 0xF
+#define APIC_CTRL_REG (APIC_CTRL_DWORD << 4)
+#define APIC_CTRL_MASK 0xFF
+#define APIC_CTRL_SHIFT 0
+
+#define APIC_DATA_DWORD 0x38
+#define APIC_DATA_REG (APIC_DATA_DWORD << 4)
+
+#define APIC_REMOTE_READ_REG 0xC0
+#define APIC_CMD_LO_REG 0x300
+#define APIC_CMD_HI_REG 0x310
+
+// APIC_CMD_LO_REG bits
+#define CMD_REG_DELIVERY_STATUS 0x1000
+#define CMD_REG_TO_READ 0x300
+#define CMD_REG_REMOTE_RD_STS_MSK 0x30000ul
+#define CMD_REG_REMOTE_DELIVERY_PENDING 0x10000ul
+#define CMD_REG_REMOTE_DELIVERY_DONE 0x20000ul
+#define CMD_REG_TO_NMI 0x400
+
+// ExeFlags bits
+#define WAIT_FOR_CORE 0x00000001ul
+#define TASK_HAS_OUTPUT 0x00000002ul
+#define RETURN_PARAMS 0x00000004ul
+#define END_AT_HLT 0x00000008ul
+#define PASS_EARLY_PARAMS 0x00000010ul
+
+// Control Byte Values
+// bit 7 indicates the type of message
+// 1 - control message
+// 0 - launch + APIC ID = message to go
+//
+#define CORE_UNAVAILABLE 0xFF
+#define CORE_IDLE 0xFE
+#define CORE_IDLE_HLT 0xFD
+#define CORE_ACTIVE 0xFC
+#define CORE_NEEDS_PTR 0xFB
+#define CORE_NEEDS_DATA_SIZE 0xFA
+#define CORE_STS_DATA_READY_1 0xF9
+#define CORE_STS_DATA_READY_0 0xF8
+#define CORE_DATA_FLAGS_READY 0xF7
+#define CORE_DATA_FLAGS_ACKNOWLEDGE 0xF6
+#define CORE_DATA_PTR_READY 0xF5
+
+// Macro used to determine the number of dwords to transmit to the AP as input
+#define SIZE_IN_DWORDS(sInput) ((UINT32) (((sizeof (sInput)) + 3) >> 2))
+
+// IDT table
+#define IDT_DESC_PRESENT 0x80
+
+#define IDT_DESC_TYPE_LDT 0x02
+#define IDT_DESC_TYPE_CALL16 0x04
+#define IDT_DESC_TYPE_TASK 0x05
+#define IDT_DESC_TYPE_INT16 0x06
+#define IDT_DESC_TYPE_TRAP16 0x07
+#define IDT_DESC_TYPE_CALL32 0x0C
+#define IDT_DESC_TYPE_INT32 0x0E
+#define IDT_DESC_TYPE_TRAP32 0x0F
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+typedef VOID (*PF_AP_TASK) (AMD_CONFIG_PARAMS *StdHeader);
+typedef VOID (*PF_AP_TASK_I) (VOID *, AMD_CONFIG_PARAMS *StdHeader);
+typedef VOID (*PF_AP_TASK_C) (AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *);
+typedef VOID (*PF_AP_TASK_IC) (VOID *, AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *);
+typedef UINT32 (*PF_AP_TASK_O) (AMD_CONFIG_PARAMS *StdHeader);
+typedef UINT32 (*PF_AP_TASK_IO) (VOID *, AMD_CONFIG_PARAMS *StdHeader);
+typedef UINT32 (*PF_AP_TASK_OC) (AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *);
+typedef UINT32 (*PF_AP_TASK_IOC) (VOID *, AMD_CONFIG_PARAMS *StdHeader, AMD_CPU_EARLY_PARAMS *);
+
+/// Function pointer union representing the eight different
+/// types of functions that an AP can be asked to perform.
+typedef union {
+ PF_AP_TASK PfApTask; ///< AMD_CONFIG_PARAMS * input with no output
+ PF_AP_TASK_I PfApTaskI; ///< VOID * + AMD_CONFIG_PARAMS * input with no output
+ PF_AP_TASK_C PfApTaskC; ///< AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with no output
+ PF_AP_TASK_IC PfApTaskIC; ///< VOID * + AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with no output
+ PF_AP_TASK_O PfApTaskO; ///< AMD_CONFIG_PARAMS * input with UINT32 output
+ PF_AP_TASK_IO PfApTaskIO; ///< VOID * + AMD_CONFIG_PARAMS * input with UINT32 output
+ PF_AP_TASK_OC PfApTaskOC; ///< AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with UINT32 output
+ PF_AP_TASK_IOC PfApTaskIOC; ///< VOID * + AMD_CONFIG_PARAMS * + AMD_CPU_EARLY_PARAMS * input with UINT32 output
+} AP_FUNCTION_PTR;
+
+/// Input structure for ApUtilTransmitBuffer and ApUtilReceiveBuffer
+/// containing information about the data transfer from one core
+/// to another.
+typedef struct {
+ IN OUT UINT16 DataSizeInDwords; ///< Size of the data to be transferred rounded up to the nearest dword
+ IN OUT VOID *DataPtr; ///< Pointer to the data
+ IN UINT32 DataTransferFlags; ///< Flags dictating certain aspects of the data transfer
+} AP_DATA_TRANSFER;
+
+/// Input structure for ApUtilRunCodeOnSocketCore.
+typedef struct _AP_TASK {
+ AP_FUNCTION_PTR FuncAddress; ///< Pointer to the function that the AP will run
+ AP_DATA_TRANSFER DataTransfer; ///< Data transfer struct for optionally passing data that the AP should use as input to the function
+ UINT32 ExeFlags; ///< Flags dictating certain aspects of the AP tasking sequence
+} AP_TASK;
+
+/// Input structure for ApUtilWaitForCoreStatus.
+typedef struct {
+ IN UINT8 *Status; ///< Pointer to the 1st element of an array of values to wait for
+ IN UINT8 NumberOfElements; ///< Number of elements in the array
+ IN UINT32 RetryCount; ///< Number of remote read cycles to complete before quitting
+ IN UINT32 WaitForStatusFlags; ///< Flags dictating certain aspects of ApUtilWaitForCoreStatus
+} AP_WAIT_FOR_STATUS;
+
+/// Interrupt Descriptor Table entry
+typedef struct {
+ UINT16 OffsetLo; ///< Lower 16 bits of the interrupt handler routine's offset
+ UINT16 Selector; ///< Interrupt handler routine's selector
+ UINT8 Rsvd; ///< Reserved
+ UINT8 Flags; ///< Interrupt flags
+ UINT16 OffsetHi; ///< Upper 16 bits of the interrupt handler routine's offset
+ UINT32 Offset64; ///< High order 32 bits of the handler's offset needed when in 64 bit mode
+ UINT32 Rsvd64; ///< Reserved
+} IDT_DESCRIPTOR;
+
+/// Structure needed to load the IDTR using the lidt instruction
+typedef struct {
+ UINT16 Limit; ///< Interrupt Descriptor Table size
+ UINT64 Base; ///< Interrupt Descriptor Table base address
+} IDT_BASE_LIMIT;
+
+#define WAIT_STATUS_EQUALITY 0x00000001ul
+#define WAIT_INFINITELY 0
+
+// Data Transfer Flags
+#define DATA_IN_MEMORY 0x00000001ul
+
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+// These are P U B L I C functions, used by AGESA
+UINT8
+ApUtilReadRemoteControlByte (
+ IN UINT32 TargetApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+ApUtilWriteControlByte (
+ IN UINT8 Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+ApUtilReadRemoteDataDword (
+ IN UINT32 TargetApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+ApUtilWriteDataDword (
+ IN UINT32 Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+ApUtilRunCodeOnSocketCore (
+ IN UINT8 Socket,
+ IN UINT8 Core,
+ IN AP_TASK *TaskPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+ApUtilWaitForCoreStatus (
+ IN UINT32 TargetApicId,
+ IN AP_WAIT_FOR_STATUS *WaitParamsPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+ApEntry (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ );
+
+UINT32
+ApUtilTaskOnExecutingCore (
+ IN AP_TASK *TaskPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN VOID *ConfigParams
+ );
+
+VOID
+ApUtilTransmitBuffer (
+ IN UINT8 Socket,
+ IN UINT8 Core,
+ IN AP_DATA_TRANSFER *BufferInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+ApUtilReceiveBuffer (
+ IN UINT8 Socket,
+ IN UINT8 Core,
+ IN OUT AP_DATA_TRANSFER *BufferInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GetLocalApicIdForCore (
+ IN UINT32 TargetSocket,
+ IN UINT32 TargetCore,
+ OUT UINT32 *LocalApicId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+ApUtilRunCodeOnAllLocalCoresAtEarly (
+ IN AP_TASK *TaskPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+ );
+
+VOID
+RelinquishControlOfAllAPs (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GetCsSelector (
+ IN UINT16 *Selector,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+SetIdtr (
+ IN IDT_BASE_LIMIT *IdtInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GetIdtr (
+ IN IDT_BASE_LIMIT *IdtInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif /* _CPU_APIC_UTILITIES_H_ */
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuBist.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuBist.c
new file mode 100644
index 0000000..14dcd05
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuBist.c
@@ -0,0 +1,171 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU BIST Status Check Implementation.
+ *
+ * Implement CPU BIST Status checking
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuApicUtilities.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+#define FILECODE PROC_CPU_CPUBIST_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+UINT32
+STATIC
+GetBistResults (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+ /*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+ /*---------------------------------------------------------------------------------------*/
+ /**
+ *
+ * This function checks the status of BIST and places the error status in the event log
+ * if there are any errors
+ *
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval AGESA_SUCCESS No BIST errors have been logged.
+ * @retval AGESA_ALERT BIST errors have been detected and added to the
+ * event log.
+ */
+AGESA_STATUS
+CheckBistStatus (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ UINT32 Core;
+ UINT32 BscSocket;
+ UINT32 BscCoreNum;
+ UINT32 NumberOfSockets;
+ UINT32 NumberOfCores;
+ UINT32 Ignored;
+ UINT32 ReturnCode;
+ AGESA_STATUS IgnoredSts;
+ AGESA_STATUS AgesaStatus;
+ AP_TASK TaskPtr;
+
+ // Make sure that Standard Header is valid
+ ASSERT (StdHeader != NULL);
+ ASSERT (IsBsp (StdHeader, &IgnoredSts));
+
+ AgesaStatus = AGESA_SUCCESS;
+
+ // Get the BscSocket, BscCoreNum and NumberOfSockets in the system
+ IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+
+ // Setup TaskPtr struct to execute routine on APs
+ TaskPtr.FuncAddress.PfApTaskO = GetBistResults;
+ TaskPtr.DataTransfer.DataSizeInDwords = 0;
+ TaskPtr.ExeFlags = TASK_HAS_OUTPUT | WAIT_FOR_CORE;
+
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+ for (Core = 0; Core < NumberOfCores; Core++) {
+ if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+ ReturnCode = ApUtilRunCodeOnSocketCore ((UINT8)Socket, (UINT8)Core, &TaskPtr, StdHeader);
+ } else {
+ ReturnCode = TaskPtr.FuncAddress.PfApTaskO (StdHeader);
+ }
+
+ // If BIST value is non-zero, add to BSP's event log
+ if (ReturnCode != 0) {
+ IDS_HDT_CONSOLE (CPU_TRACE, " BIST failure: socket %d core %d, status = 0x%x\n", Socket, Core, ReturnCode);
+ AgesaStatus = AGESA_ALERT;
+ PutEventLog (AGESA_ALERT,
+ CPU_EVENT_BIST_ERROR,
+ ReturnCode, Socket, Core, 0, StdHeader);
+ }
+ }
+ }
+ }
+
+ return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+*/
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Reads the lower 32 bits of the BIST register
+ *
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval Value of the BIST register
+*/
+UINT32
+STATIC
+GetBistResults (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 BistResults;
+
+ // Read MSRC001_0060 BIST Results Register
+ LibAmdMsrRead (MSR_BIST, &BistResults, StdHeader);
+
+ return (UINT32) (BistResults & 0xFFFFFFFF);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEarlyInit.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEarlyInit.c
new file mode 100644
index 0000000..832fa7e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEarlyInit.c
@@ -0,0 +1,469 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Reset API, and related functions.
+ *
+ * Contains code that initialized the CPU after early reset.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 85962 $ @e \$Date: 2013-01-14 20:12:29 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "Table.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "Topology.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFeatures.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_CPUEARLYINIT_FILECODE
+
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+GetPerformEarlyFlag (
+ IN OUT UINT32 *PerformEarlyFlag,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+PerformEarlyInitTable (
+ IN S_PERFORM_EARLY_INIT_ON_CORE *EarlyInitTable,
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+McaInitializationAtEarly (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+EarlyTableAfterApLaunch (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ );
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initializer routine that will be invoked by AmdCpuEarly to initialize the input
+ * structure for the Cpu Init @ Early routine.
+ *
+ * @param[in] StdHeader Opaque handle to standard config header
+ * @param[in] PlatformConfig Config handle for platform specific information
+ * @param[in,out] CpuEarlyParamsPtr Service Interface structure to initialize.
+ *
+ * @retval AGESA_SUCCESS Always Succeeds
+ */
+VOID
+AmdCpuEarlyInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+ )
+{
+ ASSERT (CpuEarlyParamsPtr != NULL);
+
+ CpuEarlyParamsPtr->MemInitPState = (UINT8) UserOptions.CfgMemInitPstate;
+ CpuEarlyParamsPtr->PlatformConfig = *PlatformConfig;
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Performs CPU related initialization at the early entry point
+ *
+ * This function performs a large list of initialization items. These items
+ * include:
+ *
+ * -1 local APIC initialization
+ * -2 MSR table initialization
+ * -3 PCI table initialization
+ * -4 HT Phy PCI table initialization
+ * -5 microcode patch loading
+ * -6 namestring determination/programming
+ * -7 AP initialization
+ * -8 power management initialization
+ * -9 core leveling
+ *
+ * This routine must be run by all cores in the system. Please note that
+ * all APs that enter will never exit.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ * @param[in] PlatformConfig Config handle for platform specific information
+ *
+ * @retval AGESA_SUCCESS
+ *
+ */
+AGESA_STATUS
+AmdCpuEarly (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig
+ )
+{
+ UINT8 WaitStatus;
+ UINT8 i;
+ UINT8 StartCore;
+ UINT8 EndCore;
+ UINT32 NodeNum;
+ UINT32 PrimaryCore;
+ UINT32 SocketNum;
+ UINT32 ModuleNum;
+ UINT32 HighCore;
+ UINT32 ApHeapIndex;
+ UINT32 TargetApicId;
+ AP_WAIT_FOR_STATUS WaitForStatus;
+ AGESA_STATUS Status;
+ AGESA_STATUS CalledStatus;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ AMD_CPU_EARLY_PARAMS CpuEarlyParams;
+ S_PERFORM_EARLY_INIT_ON_CORE *EarlyTableOnCore;
+ AP_TASK TaskPtr;
+
+ Status = AGESA_SUCCESS;
+ CalledStatus = AGESA_SUCCESS;
+
+ AmdCpuEarlyInitializer (StdHeader, PlatformConfig, &CpuEarlyParams);
+
+ IDS_OPTION_HOOK (IDS_CPU_Early_Override, &CpuEarlyParams, StdHeader);
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ EarlyTableOnCore = NULL;
+ FamilySpecificServices->GetEarlyInitBeforeApLaunchOnCoreTable (FamilySpecificServices, (CONST S_PERFORM_EARLY_INIT_ON_CORE **)&EarlyTableOnCore, &CpuEarlyParams, StdHeader);
+
+ PerformEarlyInitTable (EarlyTableOnCore, FamilySpecificServices, &CpuEarlyParams, StdHeader);
+
+ IDS_OPTION_HOOK (IDS_AFTER_EARLY_INIT_ONCORE, &CpuEarlyParams, StdHeader);
+
+ // B S P C O D E T O I N I T I A L I Z E A Ps
+ // -------------------------------------------------------
+ // -------------------------------------------------------
+ // IMPORTANT: Here we determine if we are BSP or AP
+ if (IsBsp (StdHeader, &CalledStatus)) {
+ // Clear BSP's Status Byte
+ ApUtilWriteControlByte (CORE_ACTIVE, StdHeader);
+
+ NodeNum = 0;
+ ApHeapIndex = 1;
+ while (NodeNum < MAX_NODES &&
+ GetSocketModuleOfNode (NodeNum, &SocketNum, &ModuleNum, StdHeader)) {
+ GetCpuServicesOfSocket (SocketNum, (CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ GetGivenModuleCoreRange (SocketNum, ModuleNum, &PrimaryCore, &HighCore, StdHeader);
+ if (NodeNum == 0) {
+ StartCore = (UINT8) PrimaryCore + 1;
+ } else {
+ StartCore = (UINT8) PrimaryCore;
+ }
+
+ EndCore = (UINT8) HighCore;
+ for (i = StartCore; i <= EndCore; i++) {
+ FamilySpecificServices->SetApCoreNumber (FamilySpecificServices, SocketNum, ModuleNum, ApHeapIndex, StdHeader);
+ IDS_HDT_CONSOLE (CPU_TRACE, " Launch socket %d core %d\n", SocketNum, i);
+ if (FamilySpecificServices->LaunchApCore (FamilySpecificServices, SocketNum, ModuleNum, i, PrimaryCore, StdHeader)) {
+ IDS_HDT_CONSOLE (CPU_TRACE, " Waiting for socket %d core %d\n", SocketNum, i);
+ GetLocalApicIdForCore (SocketNum, i, &TargetApicId, StdHeader);
+ WaitStatus = CORE_IDLE;
+ WaitForStatus.Status = &WaitStatus;
+ WaitForStatus.NumberOfElements = 1;
+ WaitForStatus.RetryCount = WAIT_INFINITELY;
+ WaitForStatus.WaitForStatusFlags = WAIT_STATUS_EQUALITY;
+ ApUtilWaitForCoreStatus (TargetApicId, &WaitForStatus, StdHeader);
+ ApHeapIndex++;
+ }
+ }
+ NodeNum++;
+ }
+
+ // B S P P h a s e - 1 E N D
+ //
+ // Launch all APs to implment early init table (after AP launch) in parallel
+ //
+ TaskPtr.FuncAddress.PfApTaskC = EarlyTableAfterApLaunch;
+ TaskPtr.DataTransfer.DataSizeInDwords = 0;
+ TaskPtr.ExeFlags = PASS_EARLY_PARAMS;
+ ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, &CpuEarlyParams);
+
+ IDS_OPTION_HOOK (IDS_BEFORE_PM_INIT, &CpuEarlyParams, StdHeader);
+
+ AGESA_TESTPOINT (TpProcCpuBeforePMFeatureInit, StdHeader);
+ IDS_HDT_CONSOLE (CPU_TRACE, " Dispatch CPU features before early power mgmt init\n");
+ CalledStatus = DispatchCpuFeatures (CPU_FEAT_BEFORE_PM_INIT, PlatformConfig, StdHeader);
+ if (CalledStatus > Status) {
+ Status = CalledStatus;
+ }
+
+ AGESA_TESTPOINT (TpProcCpuPowerMgmtInit, StdHeader);
+ CalledStatus = PmInitializationAtEarly (&CpuEarlyParams, StdHeader);
+ if (CalledStatus > Status) {
+ Status = CalledStatus;
+ }
+
+ AGESA_TESTPOINT (TpProcCpuEarlyFeatureInit, StdHeader);
+ IDS_HDT_CONSOLE (CPU_TRACE, " Dispatch CPU features after early power mgmt init\n");
+ CalledStatus = DispatchCpuFeatures (CPU_FEAT_AFTER_PM_INIT, PlatformConfig, StdHeader);
+
+ IDS_OPTION_HOOK (IDS_BEFORE_AP_EARLY_HALT, &CpuEarlyParams, StdHeader);
+
+ // Sleep all APs
+ IDS_HDT_CONSOLE (CPU_TRACE, " Halting all APs\n");
+ ApUtilWriteControlByte (CORE_IDLE_HLT, StdHeader);
+ } else {
+ ApEntry (StdHeader, &CpuEarlyParams);
+ }
+
+ if (CalledStatus > Status) {
+ Status = CalledStatus;
+ }
+
+ return (Status);
+}
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform early init table
+ *
+ * @param[in] EarlyInitTable Early init table.
+ * @param[in] FamilyServices The current Family Specific Services.
+ * @param[in] CpuEarlyParams Service Interface structure to initialize.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+PerformEarlyInitTable (
+ IN S_PERFORM_EARLY_INIT_ON_CORE *EarlyInitTable,
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+ UINT32 CurrentPerformEarlyFlag;
+
+ if (EarlyInitTable != NULL) {
+ GetPerformEarlyFlag (&CurrentPerformEarlyFlag, StdHeader);
+ for (i = 0; EarlyInitTable[i].PerformEarlyInitOnCore != NULL; i++) {
+ if ((EarlyInitTable[i].PerformEarlyInitFlag & CurrentPerformEarlyFlag) != 0) {
+ IDS_HDT_CONSOLE (CPU_TRACE, " Perform core init step %d\n", i);
+ EarlyInitTable[i].PerformEarlyInitOnCore (FamilyServices, CpuEarlyParams, StdHeader);
+ }
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initialize Machine Check Architecture registers
+ *
+ * This function initializes the MCA MSRs. On cold reset, these registers
+ * have an invalid data that must be cleared on all cores.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ *
+ *---------------------------------------------------------------------------------------
+ */
+VOID
+McaInitialization (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 TempVar16_a;
+ UINT32 MsrAddress;
+ UINT64 MsrData;
+ CPUID_DATA CpuIdDataStruct;
+
+ if (!(IsWarmReset (StdHeader))) {
+ // Run CPUID to verify that the processor supports MCE and MCA
+ // i.e. edx[7], and edx[14]
+ // CPUID_MODEL = 1
+ LibAmdCpuidRead (1, &CpuIdDataStruct, StdHeader);
+ if ((CpuIdDataStruct.EDX_Reg & 0x4080) != 0) {
+ // Check to see if the MCG_CTL_P bit is set
+ // MCG = Global Machine Check Exception Reporting Control Register
+ LibAmdMsrRead (MSR_MCG_CAP, &MsrData, StdHeader);
+ if ((MsrData & MCG_CTL_P) != 0) {
+ TempVar16_a = (UINT16) ((MsrData & 0x000000FF) << 2);
+ TempVar16_a += MSR_MC0_CTL;
+
+ // Initialize the data
+ MsrData = 0;
+ for (MsrAddress = MSR_MC0_CTL; MsrAddress < TempVar16_a; MsrAddress++) {
+ LibAmdMsrWrite (MsrAddress, &MsrData, StdHeader);
+ }
+ }
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform early init table after AP launch
+ *
+ * @param[in] StdHeader Config handle for library and services.
+ * @param[in] CpuEarlyParams Service Interface structure to initialize.
+ *
+ */
+VOID
+EarlyTableAfterApLaunch (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_CPU_EARLY_PARAMS *CpuEarlyParams
+ )
+{
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ S_PERFORM_EARLY_INIT_ON_CORE *EarlyTableOnCore;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ EarlyTableOnCore = NULL;
+ FamilySpecificServices->GetEarlyInitAfterApLaunchOnCoreTable (FamilySpecificServices, (CONST S_PERFORM_EARLY_INIT_ON_CORE **)&EarlyTableOnCore, CpuEarlyParams, StdHeader);
+ PerformEarlyInitTable (EarlyTableOnCore, FamilySpecificServices, CpuEarlyParams, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initialize Machine Check Architecture registers
+ *
+ * This function acts as a wrapper for calling the McaInitialization
+ * routine at AmdInitEarly.
+ *
+ * @param[in] FamilyServices The current Family Specific Services.
+ * @param[in] EarlyParams Service parameters.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+McaInitializationAtEarly (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ McaInitialization (StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Runs the given task on all cores (including self) on the socket of the executing
+ * core 0.
+ *
+ * This function is used to invoke all APs on the socket of the executing core 0 to
+ * run a specified AGESA procedure.
+ *
+ * @param[in] TaskPtr Function descriptor
+ * @param[in] StdHeader Config handle for library and services
+ * @param[in] CpuEarlyParamsPtr Required input parameters for early CPU initialization
+ *
+ */
+VOID
+ApUtilRunCodeOnAllLocalCoresAtEarly (
+ IN AP_TASK *TaskPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+ )
+{
+ UINT32 Core;
+ UINT32 Socket;
+ UINT32 IgnoredModule;
+ UINT32 IgnoredCore;
+ UINT32 ActiveCores;
+ AGESA_STATUS IgnoredSts;
+
+ IdentifyCore (StdHeader, &Socket, &IgnoredModule, &IgnoredCore, &IgnoredSts);
+ GetActiveCoresInCurrentSocket (&ActiveCores, StdHeader);
+
+ for (Core = 1; Core < (UINT8) ActiveCores; ++Core) {
+ ApUtilRunCodeOnSocketCore ((UINT8)Socket, (UINT8)Core, TaskPtr, StdHeader);
+ }
+ ApUtilTaskOnExecutingCore (TaskPtr, StdHeader, (VOID *) CpuEarlyParamsPtr);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get current condition, such as warm/cold reset, to determine if related function
+ * need to be performed at early stage
+ *
+ * @param[in, out] PerformEarlyFlag Perform early flag.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+STATIC
+GetPerformEarlyFlag (
+ IN OUT UINT32 *PerformEarlyFlag,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *PerformEarlyFlag = 0;
+ if (IsWarmReset (StdHeader)) {
+ *PerformEarlyFlag |= PERFORM_EARLY_WARM_RESET;
+ } else {
+ *PerformEarlyFlag |= PERFORM_EARLY_COLD_BOOT;
+ }
+ return;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEarlyInit.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEarlyInit.h
new file mode 100644
index 0000000..ddbb571
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEarlyInit.h
@@ -0,0 +1,290 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Reset API, and related functions and structures.
+ *
+ * Contains code that initialized the CPU after early reset.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 85962 $ @e \$Date: 2013-01-14 20:12:29 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_EARLY_INIT_H_
+#define _CPU_EARLY_INIT_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_FORWARD_DECLARATION (CPU_CORE_LEVELING_FAMILY_SERVICES);
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+//----------------------------------------------------------------------------
+// CPU BRAND ID TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+#define CPU_BRAND_ID_LENGTH 48 // Total number of characters supported
+#define LOW_NODE_DEVICEID 24
+#define NB_CAPABILITIES 0xE8 //Function 3 Registers
+//----------------------------------------------------------------------------
+// CPU MICROCODE PATCH TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/* All lengths are in bytes */
+#define MICROCODE_TRIADE_SIZE 28
+#define MICROCODE_HEADER_LENGTH 64
+
+/**
+ * @page ucodeflag Microcode Patches Signature Guide
+ *
+ * We mark patches in the ROM with a signature so that they can be easily found
+ *
+ * @anchor Microcode Patch Signature
+ * @li @e Microcode Patch Signature @n
+ * Microcode patches are marked by adding a signature before patches in the ROM image to
+ * help identify where they are located.
+ * There're two kind of signatures. One is '$UCODE2K', it indicates there's a following patch with 2K size.
+ * The other is '$UCODE4K', it indicates there's a following patch with 4K size.
+ * If you want to know the patch level / equivalent ID, please consult the BKDG for patch header format.
+ *
+ *
+ */
+/// Microcode patch flag for replacement
+typedef struct {
+ IN UINT8 MicrocodePatchesFlag[8]; ///< a flag followed by microcode
+} MICROCODE_PATCHES_FLAG;
+
+#define UCODE_2K_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', '2', 'K'}};
+#define UCODE_4K_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', '4', 'K'}};
+#define UCODE_VS_FLAG(x) STATIC CONST MICROCODE_PATCHES_FLAG ROMDATA UcodeFlag##x = {{'$', 'U', 'C', 'O', 'D', 'E', 'V', 'S'}};
+
+/* Offsets in UCODE PATCH Header */
+/* Note: Header is 64 bytes */
+#define DATE_CODE_OFFSET 0 // 4 bytes
+#define PATCH_ID 4 // 4 bytes
+#define MICROCODE_PATH_DATA_ID 8 // 2 bytes
+#define MICROCODE_PATCH_DATA_LENGTH 10 // 1 byte
+#define MICROCODE_PATCH_DATA_CHECKSUM 12 // 4 bytes
+#define CHIPSET_1_DEVICE_ID 16 // 4 bytes
+#define CHIPSET_2_DEVICE_ID 20 // 4 bytes
+#define PROCESSOR_REV_ID 24 // 2 bytes
+#define CHIPSET_1_REV_ID 26 // 1 byte
+#define CHIPSET_2_REV_ID 27 // 1 byte
+
+#define MICROCODE_PATCH_2K_SIZE 2048
+#define MICROCODE_PATCH_4K_SIZE 4096
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+//----------------------------------------------------------------------------
+// CPU BRAND ID TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// A structure representing BrandId[15:0] from
+/// CPUID Fn8000_0001_EBX
+typedef struct {
+ UINT8 String1:4; ///< An index to a string value used to create the name string
+ UINT8 String2:4; ///< An index to a string value used to create the name string
+ UINT8 Page:1; ///< An index to the appropriate page for the String1, String2, and Model values
+ UINT8 Model:7; ///< A field used to create the model number in the name string
+ UINT8 Socket:4; ///< Specifies the package type
+ UINT8 Cores:4; ///< Identifies how many physical cores are present
+} AMD_CPU_BRAND_DATA;
+
+/// A structure containing string1 and string2 values
+/// as well as information pertaining to their usage
+typedef struct {
+ IN UINT8 Cores; ///< Appropriate number of physical cores
+ IN UINT8 Page; ///< This string's page number
+ IN UINT8 Index; ///< String index
+ IN UINT8 Socket; ///< Package type information
+ IN CONST CHAR8 *Stringstart; ///< The literal string
+ IN UINT8 Stringlength; ///< Number of characters in the string
+} AMD_CPU_BRAND;
+
+/// An entire CPU brand table.
+typedef struct {
+ UINT8 NumberOfEntries; ///< The number of entries in the table.
+ CONST AMD_CPU_BRAND *Table; ///< The table entries.
+} CPU_BRAND_TABLE;
+
+//----------------------------------------------------------------------------
+// CPU MICROCODE PATCH TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// Microcode patch field definitions
+typedef struct {
+ UINT32 DateCode; ///< Date of patch creation
+ UINT32 PatchID; ///< Patch level
+ UINT16 dummy0;
+ UINT8 dummy1;
+ UINT8 dummy2;
+ UINT32 MicrocodePatchDataChecksum; ///< Doubleword sum of data block
+ UINT32 Chipset1DeviceID; ///< Device ID of 1st HT device to match
+ UINT32 Chipset2DeviceID; ///< Device ID of 2nd HT device to match
+ UINT16 ProcessorRevisionID; ///< Equivalent ID
+ UINT8 Chipset1RevisionID; ///< Revision level of 1st HT device to match
+ UINT8 Chipset2RevisionID; ///< Revision level of 2nd HT device to match
+ UINT8 BiosApiRevision; ///< BIOS INT 15 API revision required
+ UINT8 Reserved1[3]; ///< Reserved
+ UINT32 dummy3;
+ UINT32 dummy4;
+ UINT32 dummy5;
+ UINT32 dummy6;
+ UINT32 dummy7;
+ UINT32 dummy8;
+ UINT32 dummy9;
+ UINT32 dummy10;
+ UINT8 PatchDataBlock[896]; ///< Raw patch data
+ UINT8 Reserved2[896]; ///< Reserved
+ UINT8 X86CodePresent; ///< Boolean to determine if executable code exists
+ UINT8 X86CodeEntry[191]; ///< Code to execute if X86CodePresent != 0
+} MICROCODE_PATCH;
+
+/// Two kilobyte array containing the raw
+/// microcode patch binary data
+typedef struct {
+ IN UINT8 MicrocodePatches[MICROCODE_PATCH_2K_SIZE]; ///< 2k UINT8 elements
+} MICROCODE_PATCHES;
+
+/// Four kilobyte array containing the raw
+/// microcode patch binary data
+typedef struct {
+ IN UINT8 MicrocodePatches[MICROCODE_PATCH_4K_SIZE]; ///< 4k UINT8 elements
+} MICROCODE_PATCHES_4K;
+
+/**
+ * Set down core register
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] Socket Socket ID.
+ * @param[in] Module Module ID in socket.
+ * @param[in] LeveledCores Number of core.
+ * @param[in] CoreLevelMode Core level mode.
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @retval TRUE Down Core register is updated.
+ * @retval FALSE Down Core register is not updated.
+ */
+typedef BOOLEAN (F_CPU_SET_DOWN_CORE_REGISTER) (
+ IN CPU_CORE_LEVELING_FAMILY_SERVICES *FamilySpecificServices,
+ IN UINT32 *Socket,
+ IN UINT32 *Module,
+ IN UINT32 *LeveledCores,
+ IN CORE_LEVELING_TYPE CoreLevelMode,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a method
+typedef F_CPU_SET_DOWN_CORE_REGISTER *PF_CPU_SET_DOWN_CORE_REGISTER;
+
+/**
+ * Provide the interface to the Core Leveling Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _CPU_CORE_LEVELING_FAMILY_SERVICES { // See Forward Declaration above
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_CPU_SET_DOWN_CORE_REGISTER SetDownCoreRegister; ///< Method: Set down core register.
+};
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+// These are P U B L I C functions, used by IBVs
+AGESA_STATUS
+AmdCpuEarly (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig
+ );
+
+// These are P U B L I C functions, used by AGESA
+AGESA_STATUS
+PmInitializationAtEarly (
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+LoadMicrocodePatch (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GetPatchEquivalentId (
+ IN OUT UINT16 *ProcessorEquivalentId,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+ValidateMicrocode (
+ IN MICROCODE_PATCH *MicrocodePatchPtr,
+ IN UINT16 ProcessorEquivalentId,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GetMicrocodeVersion (
+ OUT UINT32 *pMicrocodeVersion,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+AmdCpuEarlyInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+ );
+
+VOID
+McaInitialization (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _CPU_EARLY_INIT_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEnvInit.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEnvInit.h
new file mode 100644
index 0000000..9b7b234
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEnvInit.h
@@ -0,0 +1,73 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Env Init API functions Prototypes.
+ *
+ * Contains code for doing any Env CPU initialization
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_ENV_INIT_H_
+#define _CPU_ENV_INIT_H_
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+// HobTransfer
+AGESA_STATUS
+CopyHeapToMainRamAtPost (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _CPU_ENV_INIT_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEventLog.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEventLog.c
new file mode 100644
index 0000000..4b6a9f9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEventLog.c
@@ -0,0 +1,396 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Event (Error) Log APIs, and related functions.
+ *
+ * Contains code that records and returns the events and errors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_CPUEVENTLOG_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define TOTAL_EVENT_LOG_BUFFERS 16
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * A wrapper for each Event Log entry.
+ */
+typedef struct {
+ UINT16 Count; ///< Entry number
+ AGESA_EVENT AgesaEvent; ///< The entry itself.
+} AGESA_EVENT_STRUCT;
+
+/**
+ * The Event Log.
+ */
+typedef struct {
+ UINT16 ReadWriteFlag; ///< Read Write flag.
+ UINT16 Count; ///< The total number of active entries.
+ UINT16 ReadRecordPtr; ///< The next entry to read.
+ UINT16 WriteRecordPtr; ///< The next entry to write.
+ AGESA_EVENT_STRUCT AgesaEventStruct[TOTAL_EVENT_LOG_BUFFERS]; ///< The entries.
+} AGESA_STRUCT_BUFFER;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+GetEventLogHeapPointer (
+ OUT AGESA_STRUCT_BUFFER **EventLog,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * External AGESA interface to read an Event from the Event Log.
+ *
+ * This is the implementation of the external AGESA interface entry, as a thin wrapper
+ * around the internal log services.
+ *
+ * @param[in] Event The event class, id, and any associated data.
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ */
+AGESA_STATUS
+AmdReadEventLog (
+ IN EVENT_PARAMS *Event
+ )
+{
+ AGESA_EVENT LogEvent;
+ AGESA_STATUS Status;
+
+ AGESA_TESTPOINT (TpIfAmdReadEventLogEntry, &Event->StdHeader);
+
+ ASSERT (Event != NULL);
+ Event->StdHeader.HeapBasePtr = HeapGetBaseAddress (&Event->StdHeader);
+ Status = GetEventLog (&LogEvent, &Event->StdHeader);
+
+ Event->EventClass = LogEvent.EventClass;
+ Event->EventInfo = LogEvent.EventInfo;
+ Event->DataParam1 = LogEvent.DataParam1;
+ Event->DataParam2 = LogEvent.DataParam2;
+ Event->DataParam3 = LogEvent.DataParam3;
+ Event->DataParam4 = LogEvent.DataParam4;
+
+ AGESA_TESTPOINT (TpIfAmdReadEventLogExit, &Event->StdHeader);
+ return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function prepares the Event Log for use.
+ *
+ * Allocate the memory for an event log on the heap. Set the read pointer, write pointer,
+ * and count to reflect the log is empty.
+ *
+ * @param[in] StdHeader Our configuration, for passing to services.
+ *
+ * @retval AGESA_SUCCESS The event log is initialized.
+ * @retval AGESA_ERROR Allocate Heap Buffer returned an error.
+ *
+ */
+AGESA_STATUS
+EventLogInitialization (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ ALLOCATE_HEAP_PARAMS AllocateHeapParams;
+ AGESA_STRUCT_BUFFER *AgesaEventAlloc;
+ AGESA_STATUS Status;
+
+ AllocateHeapParams.BufferHandle = EVENT_LOG_BUFFER_HANDLE;
+ AllocateHeapParams.RequestedBufferSize = sizeof (AGESA_STRUCT_BUFFER);
+ AllocateHeapParams.Persist = HEAP_SYSTEM_MEM;
+ Status = HeapAllocateBuffer (&AllocateHeapParams, StdHeader);
+ AgesaEventAlloc = (AGESA_STRUCT_BUFFER *) AllocateHeapParams.BufferPtr;
+ AgesaEventAlloc->Count = 0;
+ AgesaEventAlloc->ReadRecordPtr = 0;
+ AgesaEventAlloc->WriteRecordPtr = 0;
+ AgesaEventAlloc->ReadWriteFlag = 1;
+
+ return Status;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function logs AGESA events into the event log.
+ *
+ * It will put the information in a circular buffer consisting of 16 such log
+ * entries. If the buffer gets full, then the next event log entry will be written
+ * over the oldest event log entry.
+ *
+ * @param[in] EventClass The severity of the event, its associated AGESA_STATUS.
+ * @param[in] EventInfo Uniquely identifies the event.
+ * @param[in] DataParam1 Event specific additional data
+ * @param[in] DataParam2 Event specific additional data
+ * @param[in] DataParam3 Event specific additional data
+ * @param[in] DataParam4 Event specific additional data
+ * @param[in] StdHeader Header for library and services
+ *
+ */
+VOID
+PutEventLog (
+ IN AGESA_STATUS EventClass,
+ IN UINT32 EventInfo,
+ IN UINT32 DataParam1,
+ IN UINT32 DataParam2,
+ IN UINT32 DataParam3,
+ IN UINT32 DataParam4,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 Index;
+ AGESA_STRUCT_BUFFER *AgesaEventAlloc;
+
+ IDS_HDT_CONSOLE (MAIN_FLOW, "\n * %s Event: %08x Data: %x, %x, %x, %x\n\n",
+ (EventClass == AGESA_FATAL) ? "FATAL" :
+ (EventClass == AGESA_CRITICAL) ? "CRITICAL" :
+ (EventClass == AGESA_ERROR) ? "ERROR" :
+ (EventClass == AGESA_WARNING) ? "WARNING" :
+ (EventClass == AGESA_ALERT) ? "ALERT" :
+ (EventClass == AGESA_BOUNDS_CHK) ? "BOUNDS_CHK" :
+ (EventClass == AGESA_UNSUPPORTED) ? "UNSUPPORTED" :
+ "SUCCESS", EventInfo, DataParam1, DataParam2, DataParam3, DataParam4);
+
+ AgesaEventAlloc = NULL;
+ GetEventLogHeapPointer (&AgesaEventAlloc, StdHeader);
+ ASSERT (AgesaEventAlloc != NULL);
+ Index = AgesaEventAlloc->WriteRecordPtr;
+
+ // Add the new event log data into a circular buffer
+ AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.EventClass = EventClass;
+ AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.EventInfo = EventInfo;
+ AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam1 = DataParam1;
+ AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam2 = DataParam2;
+ AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam3 = DataParam3;
+ AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam4 = DataParam4;
+
+ if ((AgesaEventAlloc->WriteRecordPtr == AgesaEventAlloc->ReadRecordPtr) &&
+ (AgesaEventAlloc->ReadWriteFlag == 0)) {
+ AgesaEventAlloc->WriteRecordPtr += 1;
+ AgesaEventAlloc->ReadRecordPtr += 1;
+ if (AgesaEventAlloc->WriteRecordPtr == TOTAL_EVENT_LOG_BUFFERS) {
+ AgesaEventAlloc->WriteRecordPtr = 0;
+ AgesaEventAlloc->ReadRecordPtr = 0;
+ }
+ } else {
+ AgesaEventAlloc->WriteRecordPtr += 1;
+ if (AgesaEventAlloc->WriteRecordPtr == TOTAL_EVENT_LOG_BUFFERS) {
+ AgesaEventAlloc->WriteRecordPtr = 0;
+ }
+ AgesaEventAlloc->ReadWriteFlag = 0;
+ }
+ AgesaEventAlloc->Count = AgesaEventAlloc->Count + 1;
+
+ if (AgesaEventAlloc->Count <= TOTAL_EVENT_LOG_BUFFERS) {
+ AgesaEventAlloc->AgesaEventStruct[Index].Count = Index;
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets event logs from the circular buffer.
+ *
+ * It will read the oldest entry from the circular buffer and place that information to the structure
+ * pointed to by the parameter. The read pointers will be incremented to remove the entry from buffer
+ * so that a subsequent call will return the next entry from the buffer. If the buffer is empty the
+ * returned log event will have EventInfo zero, which is not a valid event id.
+ *
+ * @param[out] EventRecord The next log event.
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ *
+ */
+AGESA_STATUS
+GetEventLog (
+ OUT AGESA_EVENT *EventRecord,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 Index;
+ AGESA_STRUCT_BUFFER *AgesaEventAlloc;
+
+ AgesaEventAlloc = NULL;
+
+ GetEventLogHeapPointer (&AgesaEventAlloc, StdHeader);
+ ASSERT (AgesaEventAlloc != NULL);
+
+ if ((AgesaEventAlloc->ReadRecordPtr == AgesaEventAlloc->WriteRecordPtr) &&
+ (AgesaEventAlloc->ReadWriteFlag == 1)) {
+ // EventInfo == zero, means no more data.
+ LibAmdMemFill (EventRecord, 0, sizeof (AGESA_EVENT), StdHeader);
+ } else {
+ Index = AgesaEventAlloc->ReadRecordPtr;
+ EventRecord->EventClass = AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.EventClass;
+ EventRecord->EventInfo = AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.EventInfo;
+ EventRecord->DataParam1 = AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam1;
+ EventRecord->DataParam2 = AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam2;
+ EventRecord->DataParam3 = AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam3;
+ EventRecord->DataParam4 = AgesaEventAlloc->AgesaEventStruct[Index].AgesaEvent.DataParam4;
+ if (AgesaEventAlloc->ReadRecordPtr == (TOTAL_EVENT_LOG_BUFFERS - 1)) {
+ AgesaEventAlloc->ReadRecordPtr = 0;
+ } else {
+ AgesaEventAlloc->ReadRecordPtr = AgesaEventAlloc->ReadRecordPtr + 1;
+ }
+ if (AgesaEventAlloc->ReadRecordPtr == AgesaEventAlloc->WriteRecordPtr) {
+ AgesaEventAlloc->ReadWriteFlag = 1;
+ }
+ }
+ return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets event logs from the circular buffer without flushing the entry.
+ *
+ * It will read the desired entry from the circular buffer and place that information to the structure
+ * pointed to by the parameter. The read pointers will not be incremented to remove the entry from the
+ * buffer. If the buffer is empty, or the desired entry does not exist, FALSE will be returned.
+ *
+ * @param[out] EventRecord The next log event.
+ * @param[in] Index Zero-based unread entry index
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval TRUE Entry exists
+ * @retval FALSE Entry does not exist
+ *
+ */
+BOOLEAN
+PeekEventLog (
+ OUT AGESA_EVENT *EventRecord,
+ IN UINT16 Index,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 ActualIndex;
+ UINT16 UnreadEntries;
+ AGESA_STRUCT_BUFFER *AgesaEventAlloc;
+
+ AgesaEventAlloc = NULL;
+
+ GetEventLogHeapPointer (&AgesaEventAlloc, StdHeader);
+ ASSERT (AgesaEventAlloc != NULL);
+
+ if ((AgesaEventAlloc->ReadRecordPtr == AgesaEventAlloc->WriteRecordPtr) &&
+ (AgesaEventAlloc->ReadWriteFlag == 1)) {
+ // EventInfo == zero, means no more data.
+ return FALSE;
+ }
+ if (AgesaEventAlloc->ReadRecordPtr < AgesaEventAlloc->WriteRecordPtr) {
+ UnreadEntries = AgesaEventAlloc->WriteRecordPtr - AgesaEventAlloc->ReadRecordPtr;
+ } else {
+ UnreadEntries = TOTAL_EVENT_LOG_BUFFERS - (AgesaEventAlloc->ReadRecordPtr - AgesaEventAlloc->WriteRecordPtr);
+ }
+ if (Index >= UnreadEntries) {
+ return FALSE;
+ }
+ ActualIndex = Index + AgesaEventAlloc->ReadRecordPtr;
+ if (ActualIndex >= TOTAL_EVENT_LOG_BUFFERS) {
+ ActualIndex -= TOTAL_EVENT_LOG_BUFFERS;
+ }
+
+ EventRecord->EventClass = AgesaEventAlloc->AgesaEventStruct[ActualIndex].AgesaEvent.EventClass;
+ EventRecord->EventInfo = AgesaEventAlloc->AgesaEventStruct[ActualIndex].AgesaEvent.EventInfo;
+ EventRecord->DataParam1 = AgesaEventAlloc->AgesaEventStruct[ActualIndex].AgesaEvent.DataParam1;
+ EventRecord->DataParam2 = AgesaEventAlloc->AgesaEventStruct[ActualIndex].AgesaEvent.DataParam2;
+ EventRecord->DataParam3 = AgesaEventAlloc->AgesaEventStruct[ActualIndex].AgesaEvent.DataParam3;
+ EventRecord->DataParam4 = AgesaEventAlloc->AgesaEventStruct[ActualIndex].AgesaEvent.DataParam4;
+
+ return TRUE;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets the Event Log pointer.
+ *
+ * It will locate the Event Log on the heap using the heap locate service. If the Event
+ * Log is not located, NULL is returned.
+ *
+ * @param[out] EventLog Pointer to the Event Log, or NULL.
+ * @param[in] StdHeader Our Configuration, for passing to services.
+ *
+ */
+VOID
+STATIC
+GetEventLogHeapPointer (
+ OUT AGESA_STRUCT_BUFFER **EventLog,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ LOCATE_HEAP_PTR LocateHeapStruct;
+
+ LocateHeapStruct.BufferHandle = EVENT_LOG_BUFFER_HANDLE;
+ LocateHeapStruct.BufferPtr = NULL;
+ if ((HeapLocateBuffer (&LocateHeapStruct, StdHeader)) == AGESA_SUCCESS) {
+ *EventLog = (AGESA_STRUCT_BUFFER *)LocateHeapStruct.BufferPtr;
+ } else {
+ *EventLog = NULL;
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuFamilyTranslation.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuFamilyTranslation.c
new file mode 100644
index 0000000..54eceec
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuFamilyTranslation.c
@@ -0,0 +1,485 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Family Translation functions.
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU/Interface
+ * @e \$Revision: 85962 $ @e \$Date: 2013-01-14 20:12:29 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "CommonReturns.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_CPUFAMILYTRANSLATION_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+CONST CPU_SPECIFIC_SERVICES ROMDATA cpuNullServices =
+{
+ 0,
+ (PF_CPU_DISABLE_PSTATE) CommonReturnAgesaSuccess,
+ (PF_CPU_TRANSITION_PSTATE) CommonReturnAgesaSuccess,
+ (PF_CPU_GET_IDD_MAX) CommonReturnFalse,
+ (PF_CPU_GET_TSC_RATE) CommonReturnAgesaSuccess,
+ (PF_CPU_GET_NB_FREQ) CommonReturnAgesaSuccess,
+ (PF_CPU_GET_MIN_MAX_NB_FREQ) CommonReturnAgesaSuccess,
+ (PF_CPU_GET_NB_PSTATE_INFO) CommonReturnFalse,
+ (PF_CPU_IS_NBCOF_INIT_NEEDED) CommonReturnAgesaSuccess,
+ (PF_CPU_GET_NB_IDD_MAX) CommonReturnFalse,
+ (PF_CPU_AP_INITIAL_LAUNCH) CommonReturnFalse,
+ (PF_CPU_NUMBER_OF_PHYSICAL_CORES) CommonReturnZero8,
+ (PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) CommonReturnAgesaSuccess,
+ (PF_CPU_SET_AP_CORE_NUMBER) CommonVoid,
+ (PF_CPU_GET_AP_CORE_NUMBER) CommonReturnZero32,
+ (PF_CPU_TRANSFER_AP_CORE_NUMBER) CommonVoid,
+ (PF_CPU_GET_STORED_NODE_NUMBER) CommonReturnZero32,
+ (PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID) CommonReturnAgesaSuccess,
+ (PF_CPU_SAVE_FEATURES) CommonReturnAgesaSuccess,
+ (PF_CPU_WRITE_FEATURES) CommonReturnAgesaSuccess,
+ (PF_CPU_SET_WARM_RESET_FLAG) CommonReturnAgesaSuccess,
+ (PF_CPU_GET_WARM_RESET_FLAG) CommonReturnAgesaSuccess,
+ GetEmptyArray,
+ GetEmptyArray,
+ GetEmptyArray,
+ GetEmptyArray,
+ GetEmptyArray,
+ GetEmptyArray,
+ GetEmptyArray,
+ (PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO) CommonReturnAgesaSuccess,
+ (PF_IS_NB_PSTATE_ENABLED) CommonReturnFalse,
+ (PF_NEXT_LINK_HAS_HTPHY_FEATS) CommonReturnFalse,
+ (PF_SET_HT_PHY_REGISTER) CommonVoid,
+ (PF_GET_NEXT_HT_LINK_FEATURES) CommonVoid,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ InitCacheDisabled,
+ (PF_GET_EARLY_INIT_TABLE) CommonVoid,
+ (PF_GET_EARLY_INIT_TABLE) CommonVoid
+};
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+GetCpuServices (
+ IN CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+ IN UINT64 *MatchData,
+ OUT CONST VOID **CpuServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE CpuSupportedFamiliesTable;
+extern CPU_FAMILY_ID_XLAT_TABLE CpuSupportedFamilyIdTable;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Returns the logical ID of the desired processor. This will be obtained by
+ * reading the CPUID and converting it into a "logical ID" which is not package
+ * dependent.
+ *
+ * @param[in] Socket Socket
+ * @param[out] LogicalId The Processor's Logical ID
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetLogicalIdOfSocket (
+ IN UINT32 Socket,
+ OUT CPU_LOGICAL_ID *LogicalId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 RawCpuid;
+ PCI_ADDR PciAddress;
+ AGESA_STATUS AssumedSuccess;
+
+ RawCpuid = 0;
+
+ if (GetPciAddress (StdHeader, (UINT8)Socket, 0, &PciAddress, &AssumedSuccess)) {
+ PciAddress.Address.Function = FUNC_3;
+ PciAddress.Address.Register = CPUID_FMR;
+ LibAmdPciRead (AccessWidth32, PciAddress, &RawCpuid, StdHeader);
+ GetLogicalIdFromCpuid (RawCpuid, LogicalId, StdHeader);
+ } else {
+ LogicalId->Family = 0;
+ LogicalId->Revision = 0;
+ // Logical ID was not found.
+ IDS_ERROR_TRAP;
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Returns the logical ID of the executing core. This will be obtained by reading
+ * the CPUID and converting it into a "logical ID" which is not package dependent.
+ *
+ * @param[out] LogicalId The Processor's Logical ID
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetLogicalIdOfCurrentCore (
+ OUT CPU_LOGICAL_ID *LogicalId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPUID_DATA CpuidDataStruct;
+
+ LibAmdCpuidRead (AMD_CPUID_APICID_LPC_BID, &CpuidDataStruct, StdHeader);
+ GetLogicalIdFromCpuid (CpuidDataStruct.EAX_Reg, LogicalId, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Returns the logical ID of a processor with the given CPUID value. This
+ * will be obtained by converting it into a "logical ID" which is not package
+ * dependent.
+ *
+ * @param[in] RawCpuid The unprocessed CPUID value to be translated
+ * @param[out] LogicalId The Processor's Logical ID
+ * @param[in] StdHeader Handle of Header for calling lib functions and services
+ *
+ */
+VOID
+GetLogicalIdFromCpuid (
+ IN UINT32 RawCpuid,
+ OUT CPU_LOGICAL_ID *LogicalId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+ UINT8 k;
+ UINT8 NumberOfFamiliesSupported;
+ UINT8 NumberOfLogicalSubFamilies;
+ UINT8 LogicalIdEntries;
+ UINT32 j;
+ UINT32 RawFamily;
+ UINT32 CpuModelAndExtendedModel;
+ UINT64 LogicalFamily;
+ BOOLEAN IdNotFound;
+ BOOLEAN FamilyNotFound;
+ CONST PF_CPU_GET_SUBFAMILY_ID_ARRAY *SubFamilyIdPtr;
+ CPU_LOGICAL_ID_XLAT *CpuLogicalIdAndRevPtr;
+ CONST CPU_LOGICAL_ID_FAMILY_XLAT *ImageSupportedId;
+
+ IdNotFound = TRUE;
+ FamilyNotFound = TRUE;
+ CpuLogicalIdAndRevPtr = NULL;
+ ImageSupportedId = CpuSupportedFamilyIdTable.FamilyIdTable;
+ NumberOfFamiliesSupported = CpuSupportedFamilyIdTable.Elements;
+
+ RawFamily = ((RawCpuid & 0xF00) >> 8) + ((RawCpuid & 0xFF00000) >> 20);
+ RawCpuid &= (UINT32) CPU_FMS_MASK;
+ CpuModelAndExtendedModel = (UINT16) ((RawCpuid >> 8) | RawCpuid);
+
+ LogicalId->Family = 0;
+ LogicalId->Revision = 0;
+
+ for (i = 0; i < NumberOfFamiliesSupported && FamilyNotFound; i++) {
+ if (ImageSupportedId[i].Family == RawFamily) {
+ FamilyNotFound = FALSE;
+ LogicalId->Family = ImageSupportedId[i].UnknownRevision.Family;
+ LogicalId->Revision = ImageSupportedId[i].UnknownRevision.Revision;
+
+ NumberOfLogicalSubFamilies = ImageSupportedId[i].Elements;
+ SubFamilyIdPtr = ImageSupportedId[i].SubFamilyIdTable;
+ for (j = 0; j < NumberOfLogicalSubFamilies && IdNotFound; j++) {
+ SubFamilyIdPtr[j] ((CONST CPU_LOGICAL_ID_XLAT **)&CpuLogicalIdAndRevPtr, &LogicalIdEntries, &LogicalFamily, StdHeader);
+ ASSERT (CpuLogicalIdAndRevPtr != NULL);
+ for (k = 0; k < LogicalIdEntries; k++) {
+ if (CpuLogicalIdAndRevPtr[k].RawId == CpuModelAndExtendedModel) {
+ IdNotFound = FALSE;
+ LogicalId->Family = LogicalFamily;
+ LogicalId->Revision = CpuLogicalIdAndRevPtr[k].LogicalId;
+ break;
+ }
+ }
+ }
+ }
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Retrieves a pointer to the desired processor's family specific services structure.
+ *
+ * @param[in] Socket The Processor in this Socket.
+ * @param[out] FunctionTable The Processor's Family Specific services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetCpuServicesOfSocket (
+ IN UINT32 Socket,
+ OUT CONST CPU_SPECIFIC_SERVICES **FunctionTable,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GetFeatureServicesOfSocket (&CpuSupportedFamiliesTable,
+ Socket,
+ (CONST VOID **) FunctionTable,
+ StdHeader);
+ if (*FunctionTable == NULL) {
+ *FunctionTable = (CPU_SPECIFIC_SERVICES *)&cpuNullServices;
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Retrieves a pointer to the desired processor's family specific services structure.
+ *
+ * @param[in] FamilyTable The table to search in.
+ * @param[in] Socket The Processor in this Socket.
+ * @param[out] CpuServices The Processor's Family Specific services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetFeatureServicesOfSocket (
+ IN CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+ IN UINT32 Socket,
+ OUT CONST VOID **CpuServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPU_LOGICAL_ID CpuFamilyRevision;
+
+ GetLogicalIdOfSocket (Socket, &CpuFamilyRevision, StdHeader);
+ GetFeatureServicesFromLogicalId (FamilyTable, &CpuFamilyRevision, CpuServices, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Retrieves a pointer to the executing core's family specific services structure.
+ *
+ * @param[out] FunctionTable The Processor's Family Specific services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetCpuServicesOfCurrentCore (
+ OUT CONST CPU_SPECIFIC_SERVICES **FunctionTable,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GetFeatureServicesOfCurrentCore (&CpuSupportedFamiliesTable,
+ (CONST VOID **) FunctionTable,
+ StdHeader);
+ if (*FunctionTable == NULL) {
+ *FunctionTable = (CPU_SPECIFIC_SERVICES *)&cpuNullServices;
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Retrieves a pointer to the family specific services structure for a processor
+ * with the given logical ID.
+ *
+ * @param[in] FamilyTable The table to search in.
+ * @param[out] CpuServices The Processor's Family Specific services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetFeatureServicesOfCurrentCore (
+ IN CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+ OUT CONST VOID **CpuServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPU_LOGICAL_ID CpuFamilyRevision;
+
+ GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+ GetFeatureServicesFromLogicalId (FamilyTable, &CpuFamilyRevision, CpuServices, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Retrieves a pointer to the family specific services structure for a processor
+ * with the given logical ID.
+ *
+ * @param[in] LogicalId The Processor's logical ID.
+ * @param[out] FunctionTable The Processor's Family Specific services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetCpuServicesFromLogicalId (
+ IN CPU_LOGICAL_ID *LogicalId,
+ OUT CONST CPU_SPECIFIC_SERVICES **FunctionTable,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GetFeatureServicesFromLogicalId (&CpuSupportedFamiliesTable,
+ LogicalId,
+ (CONST VOID **) FunctionTable,
+ StdHeader);
+ if (*FunctionTable == NULL) {
+ *FunctionTable = &cpuNullServices;
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Retrieves a pointer to the family specific services structure for a processor
+ * with the given logical ID.
+ *
+ * @param[in] FamilyTable The table to search in.
+ * @param[in] LogicalId The Processor's logical ID.
+ * @param[out] CpuServices The Processor's Family Specific services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetFeatureServicesFromLogicalId (
+ IN CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+ IN CPU_LOGICAL_ID *LogicalId,
+ OUT CONST VOID **CpuServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GetCpuServices (FamilyTable, &LogicalId->Family, CpuServices, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Finds a family match in the given table, and returns the pointer to the
+ * appropriate table. If no match is found in the table, NULL will be returned.
+ *
+ * @param[in] FamilyTable The table to search in.
+ * @param[in] MatchData Family data that must match.
+ * @param[out] CpuServices The Processor's Family Specific services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+STATIC
+GetCpuServices (
+ IN CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+ IN UINT64 *MatchData,
+ OUT CONST VOID **CpuServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BOOLEAN IsFamily;
+ UINT8 i;
+ UINT8 NumberOfFamiliesSupported;
+ CONST CPU_SPECIFIC_SERVICES_XLAT *ImageSupportedFamiliesPtr;
+
+ ImageSupportedFamiliesPtr = FamilyTable->FamilyTable;
+ NumberOfFamiliesSupported = FamilyTable->Elements;
+ IsFamily = FALSE;
+ for (i = 0; i < NumberOfFamiliesSupported; i++) {
+ if ((ImageSupportedFamiliesPtr[i].Family & *MatchData) != 0) {
+ IsFamily = TRUE;
+ break;
+ }
+ }
+ if (IsFamily) {
+ *CpuServices = ImageSupportedFamiliesPtr[i].TablePtr;
+ } else {
+ *CpuServices = NULL;
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Used to stub out various family specific tables of information.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] Empty NULL, to indicate no data.
+ * @param[out] NumberOfElements Zero, to indicate no data.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+VOID
+GetEmptyArray (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **Empty,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *NumberOfElements = 0;
+ *Empty = NULL;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuFamilyTranslation.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuFamilyTranslation.h
new file mode 100644
index 0000000..309fc18
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuFamilyTranslation.h
@@ -0,0 +1,1052 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Family Translation functions.
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 85962 $ @e \$Date: 2013-01-14 20:12:29 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_FAMILY_TRANSLATION_H_
+#define _CPU_FAMILY_TRANSLATION_H_
+
+/**
+ * @page cpuimplfss CPU Family Specific Services Implementation Guide
+ *
+ * CPU Family Specific Services provides access to supported family service functions and data,
+ * in a manner that isolates calling code from knowledge about particular families or which
+ * families are supported in the current build.
+ *
+ * @par Adding a Method to Family Specific Services
+ *
+ * To add a new method to Family Specific Services, follow these steps.
+ * <ul>
+ * <li> Create a typedef for the Method with the correct parameters and return type.
+ *
+ * <ul>
+ * <li> Name the method typedef (*PF_METHOD_NAME)(), where METHOD_NAME is the same name as the method table item,
+ * but with "_"'s and UPPERCASE, rather than mixed case.
+ * @n <tt> typedef VOID (*PF_METHOD_NAME)(); </tt> @n
+ *
+ * <li> [Optionally make the type F_<name> and provide a separate:
+ * @n <tt> typedef F_METHOD_NAME *PF_METHOD_NAME> </tt> @n
+ * and provide a single line "///" doxygen comment brief description on the PF_ type.]
+ * </ul>
+ *
+ * <li> The first parameter to @b all Family Specific Service Methods is @b required to be a reference to
+ * their Family Service struct.
+ * @n <tt> IN CPU_SPECIFIC_SERVICES *FamilySpecificServices </tt> @n
+ *
+ * <li> Provide a standard doxygen function preamble for the Method typedef. Begin the
+ * detailed description by provide a reference to the method instances page by including
+ * the lines below:
+ * @code
+ * *
+ * * @CpuServiceInstances
+ * *
+ * @endcode
+ * @note It is important to provide documentation for the method type, because the method may not
+ * have an implementation in any families supported by the current package. @n
+ *
+ * <li> Add to the CPU_SPECIFIC_SERVICES struct an item for the Method:
+ * @n <tt> PF_METHOD_NAME MethodName; ///< Method: description. </tt> @n
+ * </ul>
+ *
+ * @par Implementing a Family Specific Instance of the method.
+ *
+ * To implement an instance of a method for a specific family follow these steps.
+ *
+ * - In appropriate files in the family specific directory, implement the method with the return type
+ * and parameters matching the method typedef.
+ *
+ * - Name the function FnnMethodName(), where nn is the family number.
+ *
+ * - Create a doxygen function preamble for the method instance. Begin the detailed description with
+ * an Implements command to reference the method type and add this instance to the Method Instances page.
+ * @code
+ * *
+ * * @CpuServiceMethod{::F_METHOD_NAME}.
+ * *
+ * @endcode
+ *
+ * - To access other family specific services as part of the method implementation, the function
+ * @b must use FamilySpecificServices->OtherMethod(). Do not directly call other family specific
+ * routines, because in the table there may be overrides or this routine may be shared by multiple families.
+ *
+ * - Do @b not call Family translation services from a family specific instance. Use the parameter.
+ *
+ * - Add the instance to the family specific CPU_SPECIFIC_SERVICES instance.
+ *
+ * - If a family does not need an instance of the method use one of the CommonReturns from
+ * CommonReturns.h with the same return type.
+ *
+ * @par Invoking Family Specific Services.
+ *
+ * The following example shows how to invoke a family specific method.
+ * @n @code
+ * CPU_SPECIFIC_SERVICES *FamilyServices;
+ *
+ * GetCpuServicesOfCurrentCore (&FamilyServices, StdHeader);
+ * ASSERT (FamilyServices != NULL);
+ * FamilyServices->MethodName (FamilyServices, StdHeader);
+ * @endcode
+ *
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+#include "cpuPostInit.h"
+#include "cpuEnvInit.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "Table.h"
+#include "Ids.h"
+#include "Topology.h"
+
+// Forward declaration needed for multi-structure mutual references.
+AGESA_FORWARD_DECLARATION (CPU_SPECIFIC_SERVICES);
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+/**
+ * Disable the desired P-state.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StateNumber Hardware P-state number.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_DISABLE_PSTATE (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT8 StateNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_DISABLE_PSTATE *PF_CPU_DISABLE_PSTATE;
+
+/**
+ * Transition the current core to the desired P-state.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StateNumber Software P-state number.
+ * @param[in] WaitForChange Wait/don't wait for P-state change to complete.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_TRANSITION_PSTATE (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT8 StateNumber,
+ IN BOOLEAN WaitForChange,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_TRANSITION_PSTATE *PF_CPU_TRANSITION_PSTATE;
+
+/**
+ * Get the desired P-state's maximum current required in milliamps.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StateNumber The desired hardware P-state number.
+ * @param[out] ProcIddMax The P-state's maximum current.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval TRUE The P-state is enabled, and ProcIddMax is valid.
+ * @retval FALSE The P-state is disabled.
+ *
+ */
+typedef BOOLEAN F_CPU_GET_IDD_MAX (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT8 StateNumber,
+ OUT UINT32 *ProcIddMax,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_GET_IDD_MAX *PF_CPU_GET_IDD_MAX;
+
+
+/**
+ * Returns the rate at which the current core's timestamp counter increments in megahertz.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] FreqInMHz The rate at which the TSC increments in megahertz.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_GET_TSC_RATE (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT UINT32 *FreqInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_GET_TSC_RATE *PF_CPU_GET_TSC_RATE;
+
+/**
+ * Returns the processor north bridge's clock rate in megahertz.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] FreqInMHz The desired node's frequency in megahertz.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval AGESA_SUCCESS FreqInMHz is valid.
+ */
+typedef AGESA_STATUS F_CPU_GET_NB_FREQ (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT UINT32 *FreqInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_GET_NB_FREQ *PF_CPU_GET_NB_FREQ;
+
+/**
+ * Returns the node's minimum and maximum northbridge frequency.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] PciAddress The segment, bus, and device numbers of the CPU in question.
+ * @param[out] MinFreqInMHz The minimum north bridge frequency.
+ * @param[out] MaxFreqInMHz The maximum north bridge frequency.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval AGESA_STATUS Northbridge frequency is valid
+ */
+typedef AGESA_STATUS F_CPU_GET_MIN_MAX_NB_FREQ (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PCI_ADDR *PciAddress,
+ OUT UINT32 *MinFreqInMHz,
+ OUT UINT32 *MaxFreqInMHz,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_GET_MIN_MAX_NB_FREQ *PF_CPU_GET_MIN_MAX_NB_FREQ;
+
+/**
+ * Returns the processor north bridge's P-state settings.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] PciAddress The segment, bus, and device numbers of the CPU in question.
+ * @param[in] NbPstate The NB P-state number to check.
+ * @param[out] FreqNumeratorInMHz The desired node's frequency numerator in megahertz.
+ * @param[out] FreqDivisor The desired node's frequency divisor.
+ * @param[out] VoltageInuV The desired node's voltage in microvolts.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval TRUE NbPstate is valid
+ * @retval FALSE NbPstate is disabled or invalid
+ */
+typedef BOOLEAN F_CPU_GET_NB_PSTATE_INFO (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN PCI_ADDR *PciAddress,
+ IN UINT32 NbPstate,
+ OUT UINT32 *FreqNumeratorInMHz,
+ OUT UINT32 *FreqDivisor,
+ OUT UINT32 *VoltageInuV,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_GET_NB_PSTATE_INFO *PF_CPU_GET_NB_PSTATE_INFO;
+
+/**
+ * Returns whether or not the NB frequency initialization sequence is required
+ * to be performed by the BIOS.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] PciAddress The northbridge to query by pci base address.
+ * @param[out] NbVidUpdateAll Do all NbVids need to be updated as well.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef BOOLEAN F_CPU_IS_NBCOF_INIT_NEEDED (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PCI_ADDR *PciAddress,
+ OUT BOOLEAN *NbVidUpdateAll,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_IS_NBCOF_INIT_NEEDED *PF_CPU_IS_NBCOF_INIT_NEEDED;
+
+/**
+ * Get the desired NB P-state's maximum current required in milliamps.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StateNumber The desired hardware P-state number.
+ * @param[out] NbIddMax The NB P-state's maximum current.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval TRUE The NB P-state is enabled, and NbIddMax is valid.
+ * @retval FALSE The NB P-state is disabled.
+ *
+ */
+typedef BOOLEAN F_CPU_GET_NB_IDD_MAX (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT8 StateNumber,
+ OUT UINT32 *NbIddMax,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_GET_NB_IDD_MAX *PF_CPU_GET_NB_IDD_MAX;
+
+/**
+ * Launches the desired core from the reset vector.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] SocketNumber The desired core's socket number.
+ * @param[in] ModuleNumber The desired core's die number.
+ * @param[in] CoreNumber The desired core's die relative core number.
+ * @param[in] PrimaryCoreNumber SocketNumber / ModuleNumber's primary core number.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval TRUE The core was launched successfully.
+ * @retval FALSE The core was previously launched, or has a problem.
+ */
+typedef BOOLEAN F_CPU_AP_INITIAL_LAUNCH (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT32 SocketNumber,
+ IN UINT32 ModuleNumber,
+ IN UINT32 CoreNumber,
+ IN UINT32 PrimaryCoreNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_AP_INITIAL_LAUNCH *PF_CPU_AP_INITIAL_LAUNCH;
+
+/**
+ * Returns the appropriate number of physical processor cores
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @return One-based number of physical cores on current processor
+ */
+typedef UINT8 F_CPU_NUMBER_OF_PHYSICAL_CORES (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_NUMBER_OF_PHYSICAL_CORES *PF_CPU_NUMBER_OF_PHYSICAL_CORES;
+
+/**
+ * Returns a family specific table of information pointer and size.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] FamilySpecificArray Pointer to the appropriate list for the core.
+ * @param[out] NumberOfElements Number of valid entries FamilySpecificArray.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID F_CPU_GET_FAMILY_SPECIFIC_ARRAY (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **FamilySpecificArray,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_GET_FAMILY_SPECIFIC_ARRAY *PF_CPU_GET_FAMILY_SPECIFIC_ARRAY;
+
+/**
+ * Returns a model specific list of logical IDs.
+ *
+ * @param[out] LogicalIdXlat Installed logical ID table.
+ * @param[out] NumberOfElements Number of entries in the Logical ID translate table.
+ * @param[out] LogicalFamily Base logical family bit mask.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID F_CPU_GET_SUBFAMILY_ID_ARRAY (
+ OUT CONST CPU_LOGICAL_ID_XLAT **LogicalIdXlat,
+ OUT UINT8 *NumberOfElements,
+ OUT UINT64 *LogicalFamily,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a method.
+typedef F_CPU_GET_SUBFAMILY_ID_ARRAY *PF_CPU_GET_SUBFAMILY_ID_ARRAY;
+
+/**
+ * Use the Mailbox Register to get the Ap Mailbox info for the current core.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] ApMailboxInfo The AP Mailbox info
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID (F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE) (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT AP_MAILBOXES *ApMailboxInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a method
+typedef F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE *PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE;
+
+/**
+ * Set the AP core number in the AP's Mailbox.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] Socket The AP's socket
+ * @param[in] Module The AP's module
+ * @param[in] ApCoreNumber The AP's unique core number
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID (F_CPU_SET_AP_CORE_NUMBER) (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN UINT32 Socket,
+ IN UINT32 Module,
+ IN UINT32 ApCoreNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a method
+typedef F_CPU_SET_AP_CORE_NUMBER *PF_CPU_SET_AP_CORE_NUMBER;
+
+/**
+ * Get the AP core number from hardware.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @return The AP's unique core number
+ */
+typedef UINT32 (F_CPU_GET_AP_CORE_NUMBER) (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a method
+typedef F_CPU_GET_AP_CORE_NUMBER *PF_CPU_GET_AP_CORE_NUMBER;
+
+/**
+ * Move the AP's core number from the mailbox to hardware.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @return The AP's unique core number
+ */
+typedef VOID (F_CPU_TRANSFER_AP_CORE_NUMBER) (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a method
+typedef F_CPU_TRANSFER_AP_CORE_NUMBER *PF_CPU_TRANSFER_AP_CORE_NUMBER;
+
+/**
+ * Get the stored node number from hardware.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @return The current core's zero based node number
+ */
+typedef UINT32 (F_CPU_GET_STORED_NODE_NUMBER) (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a method
+typedef F_CPU_GET_STORED_NODE_NUMBER *PF_CPU_GET_STORED_NODE_NUMBER;
+
+/**
+ * Core ID position in the initial APIC ID, reflected as a number zero or one.
+ */
+typedef enum {
+ CoreIdPositionZero, ///< Zero, the Core Id bits are the Most Significant bits.
+ CoreIdPositionOne, ///< One, the Core Id bits are the Least Significant bits.
+ CoreIdPositionMax ///< Limit check.
+} CORE_ID_POSITION;
+
+/**
+ * Return a number zero or one, based on the Core ID position in the initial APIC Id.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval CoreIdPositionZero Core Id is not low
+ * @retval CoreIdPositionOne Core Id is low
+ */
+typedef CORE_ID_POSITION F_CORE_ID_POSITION_IN_INITIAL_APIC_ID (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a method
+typedef F_CORE_ID_POSITION_IN_INITIAL_APIC_ID *PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID;
+
+/**
+ * Get least common features set of all CPUs and save them to CPU_FEATURES_LIST
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in,out] cpuFeatureListPtr The CPU Features List
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID (F_CPU_SAVE_FEATURES) (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN OUT CPU_FEATURES_LIST *cpuFeatureListPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a method
+typedef F_CPU_SAVE_FEATURES *PF_CPU_SAVE_FEATURES;
+
+/**
+ * Get least common features from CPU_FEATURES_LIST and write them to CPU
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in,out] cpuFeatureListPtr The CPU Features List
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID (F_CPU_WRITE_FEATURES) (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN OUT CPU_FEATURES_LIST *cpuFeatureListPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a method
+typedef F_CPU_WRITE_FEATURES *PF_CPU_WRITE_FEATURES;
+
+/**
+ * Set Warm Reset Flag
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StdHeader Header for library and services.
+ * @param[in] Request Value to set the flags to.
+ *
+ */
+typedef VOID (F_CPU_SET_WARM_RESET_FLAG) (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN WARM_RESET_REQUEST *Request
+ );
+
+/// Reference to a method
+typedef F_CPU_SET_WARM_RESET_FLAG *PF_CPU_SET_WARM_RESET_FLAG;
+
+/**
+ * Get Warm Reset Flag
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] StdHeader Header for library and services.
+ * @param[out] BiosRstDet Indicate warm reset status.
+ *
+ */
+typedef VOID (F_CPU_GET_WARM_RESET_FLAG) (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT WARM_RESET_REQUEST *Request
+ );
+
+/// Reference to a method
+typedef F_CPU_GET_WARM_RESET_FLAG *PF_CPU_GET_WARM_RESET_FLAG;
+
+
+/**
+ * Get CPU Specific Platform Type Info.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in,out] FeaturesUnion The Features supported by this platform.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef AGESA_STATUS F_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN OUT PLATFORM_FEATS *FeaturesUnion,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO *PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO;
+
+/**
+ * Is the Northbridge PState feature enabled?
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval TRUE The NB PState feature is enabled.
+ * @retval FALSE The NB PState feature is not enabled.
+ */
+typedef BOOLEAN F_IS_NB_PSTATE_ENABLED (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a method
+typedef F_IS_NB_PSTATE_ENABLED *PF_IS_NB_PSTATE_ENABLED;
+
+/**
+ * Gets the next link with features matching the HT phy register table entry type features.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in,out] HtHostCapability Initially the PCI bus, device, function=0, offset=0;
+ * Each call returns the HT Host Capability function and offset;
+ * Caller may use it to access registers, but must @b not modify it;
+ * Each new call passes the previous value as input.
+ * @param[in,out] Link Initially zero, each call returns the link number; caller passes it back unmodified each call.
+ * @param[in] HtPhyLinkType Link type field from a register table entry to compare against
+ * @param[out] MatchedSublink1 TRUE: It is actually just sublink 1 that matches, FALSE: any other condition.
+ * @param[out] Frequency0 The frequency of sublink0 (200 MHz if not connected).
+ * @param[out] Frequency1 The frequency of sublink1 (200 MHz if not connected).
+ * @param[in] StdHeader Standard Head Pointer
+ *
+ * @retval TRUE Link matches
+ * @retval FALSE No more links
+ *
+ */
+typedef BOOLEAN F_NEXT_LINK_HAS_HTPHY_FEATS (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN OUT PCI_ADDR *HtHostCapability,
+ IN OUT UINT32 *Link,
+ IN HT_PHY_LINK_FEATS *HtPhyLinkType,
+ OUT BOOLEAN *MatchedSublink1,
+ OUT HT_FREQUENCIES *Frequency0,
+ OUT HT_FREQUENCIES *Frequency1,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/// Reference to a Method.
+typedef F_NEXT_LINK_HAS_HTPHY_FEATS *PF_NEXT_LINK_HAS_HTPHY_FEATS;
+
+/**
+ * Applies an HT Phy read-modify-write based on an HT Phy register table entry.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] HtPhyEntry HT Phy register table entry to apply
+ * @param[in] CapabilitySet The link's HT Host base address.
+ * @param[in] Link Zero based, node, link number (not package link), always a sublink0 link.
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+typedef VOID F_SET_HT_PHY_REGISTER (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN HT_PHY_TYPE_ENTRY_DATA *HtPhyEntry,
+ IN PCI_ADDR CapabilitySet,
+ IN UINT32 Link,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/// Reference to a Method.
+typedef F_SET_HT_PHY_REGISTER *PF_SET_HT_PHY_REGISTER;
+
+/**
+ * Performs an early initialization function on the executing core.
+ *
+ * @param[in] FamilyServices The current Family Specific Services.
+ * @param[in] EarlyParams CPU module early paramters.
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+typedef VOID F_PERFORM_EARLY_INIT_ON_CORE (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/// Reference to a Method.
+typedef F_PERFORM_EARLY_INIT_ON_CORE *PF_PERFORM_EARLY_INIT_ON_CORE;
+
+/**
+ * A struct that contains function pointer and function flag
+ *
+ * the flag indicates if the function need to be run.
+ */
+typedef struct _S_PERFORM_EARLY_INIT_ON_CORE {
+ PF_PERFORM_EARLY_INIT_ON_CORE PerformEarlyInitOnCore; ///< Function Pointer, which points to the function need to be run at early stage
+ UINT32 PerformEarlyInitFlag; ///< Function Flag, which indicates if the function need to be run.
+} S_PERFORM_EARLY_INIT_ON_CORE;
+
+/**
+ * Returns the initialization steps that the executing core should
+ * perform at AmdInitEarly.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilyServices The current Family Specific Services.
+ * @param[out] Table Table of appropriate init steps for the executing core.
+ * @param[in] EarlyParams CPU module early paramters.
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+typedef VOID F_GET_EARLY_INIT_TABLE (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ OUT CONST S_PERFORM_EARLY_INIT_ON_CORE **Table,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/// Reference to a Method.
+typedef F_GET_EARLY_INIT_TABLE *PF_GET_EARLY_INIT_TABLE;
+
+/**
+ * Provide the features of the next HT link.
+ *
+ * @CpuServiceInstances
+ *
+ * This method is different than the HT Phy Features method, because for the phy registers
+ * sublink 1 matches and should be programmed if the link is ganged but for PCI config
+ * registers sublink 1 is reserved if the link is ganged.
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in,out] Link The link number, for accessing non-capability set registers.
+ * Zero on initial call, and passed back unmodified on each subsequent call.
+ * @param[in,out] LinkBase IN: initially the node's PCI config base address, passed back on each call.
+ * OUT: the base HT Host capability PCI address for the link.
+ * @param[out] HtHostFeats The link's features.
+ * @param[in] StdHeader Standard Head Pointer
+ *
+ * @retval TRUE Valid link and features found.
+ * @retval FALSE No more links.
+ */
+typedef BOOLEAN F_GET_NEXT_HT_LINK_FEATURES (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN OUT UINTN *Link,
+ IN OUT PCI_ADDR *LinkBase,
+ OUT HT_HOST_FEATS *HtHostFeats,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/// Reference to a Method.
+typedef F_GET_NEXT_HT_LINK_FEATURES *PF_GET_NEXT_HT_LINK_FEATURES;
+
+/// Cache Enable / Disable policy before giving control back to OS.
+typedef enum {
+ InitCacheDisabled, ///<Disable cache CR0.CD bit
+ InitCacheEnabled ///<Enable cache CR0.CD bit
+} FAMILY_CACHE_INIT_POLICY;
+
+
+/**
+ * Returns the cpapbility of internal link extended capability
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[out] Capability Capability bit mask of internal link extneded supported
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] StdHeader Config handle for library and services
+ *
+ * @retval TRUE Internal link extended capability is supported. Capability is valid.
+ * @retval FALSE Internal link extended capability is unsupported. Capability is invalid.
+ *
+ */
+typedef BOOLEAN F_GET_INTERNAL_LINK_EXTENDED_CAPABILITY (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT UINT8 *Capability,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/// Reference to a Method.
+typedef F_GET_INTERNAL_LINK_EXTENDED_CAPABILITY *PF_GET_INTERNAL_LINK_EXTENDED_CAPABILITY;
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Provide the interface to all cpu Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ * See CPU Family Specific Services Implementation Guide for adding new services.
+ */
+struct _CPU_SPECIFIC_SERVICES { // See the Forwaqrd Declaration above
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_CPU_DISABLE_PSTATE DisablePstate; ///< Method: Disable the desired P-state.
+ PF_CPU_TRANSITION_PSTATE TransitionPstate; ///< Method: Transition the current core to the desired P-state.
+ PF_CPU_GET_IDD_MAX GetProcIddMax; ///< Method: Gets P-state maximum current required
+ PF_CPU_GET_TSC_RATE GetTscRate; ///< Method: Returns the rate at which the current core's timestamp counter increments in megahertz.
+ PF_CPU_GET_NB_FREQ GetCurrentNbFrequency; ///< Method: Returns the processor north bridge's clock rate in megahertz.
+ PF_CPU_GET_MIN_MAX_NB_FREQ GetMinMaxNbFrequency; ///< Method: Returns the node's minimum and maximum northbridge frequency.
+ PF_CPU_GET_NB_PSTATE_INFO GetNbPstateInfo; ///< Method: Returns information about the processor north bridge's P-states.
+ PF_CPU_IS_NBCOF_INIT_NEEDED IsNbCofInitNeeded; ///< Method: Returns whether or not the NB frequency initialization sequence is required to be performed by the BIOS.
+ PF_CPU_GET_NB_IDD_MAX GetNbIddMax; ///< Method: Gets NB P-state maximum current required
+ PF_CPU_AP_INITIAL_LAUNCH LaunchApCore; ///< Method: Launches the desired core from the reset vector.
+ PF_CPU_NUMBER_OF_PHYSICAL_CORES GetNumberOfPhysicalCores; ///< Method: Get the number of physical cores of current processor.
+ PF_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE GetApMailboxFromHardware; ///< Method: Get the AP's topology info from the hardware mailbox.
+ PF_CPU_SET_AP_CORE_NUMBER SetApCoreNumber; ///< Method: Set the AP's core number to the hardware mailbox.
+ PF_CPU_GET_AP_CORE_NUMBER GetApCoreNumber; ///< Method: Get the AP's core number from hardware.
+ PF_CPU_TRANSFER_AP_CORE_NUMBER TransferApCoreNumber; ///< Method: Move the AP's core number from the mailbox to hardware.
+ PF_CPU_GET_STORED_NODE_NUMBER GetStoredNodeNumber; ///< Method: Get the stored node number from hardware.
+ PF_CORE_ID_POSITION_IN_INITIAL_APIC_ID CoreIdPositionInInitialApicId; ///< Method: Which bits in initial APIC Id are the Core Id.
+ PF_CPU_SAVE_FEATURES SaveFeatures; ///< Method: Get least common features set of all CPUs and save them to CPU_FEATURES_LIST
+ PF_CPU_WRITE_FEATURES WriteFeatures; ///< Method: Get least common features from CPU_FEATURES_LIST and write them to CPU
+ PF_CPU_SET_WARM_RESET_FLAG SetWarmResetFlag; ///< Method: Set Warm Reset Flag
+ PF_CPU_GET_WARM_RESET_FLAG GetWarmResetFlag; ///< Method: Get Warm Reset Flag
+ PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetBrandString1; ///< Method: Get a Brand String table
+ PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetBrandString2; ///< Method: Get a Brand String table
+ PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetMicroCodePatchesStruct; ///< Method: Get microcode patches
+ PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetMicrocodeEquivalenceTable; ///< Method: Get CPU equivalence for loading microcode patches.
+ PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetCacheInfo; ///< Method: Get setup for cache use and initialization.
+ PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetSysPmTableStruct; ///< Method: Get Power Management settings.
+ PF_CPU_GET_FAMILY_SPECIFIC_ARRAY GetWheaInitData; ///< Method: Get Whea Initial Data.
+ PF_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO GetPlatformTypeSpecificInfo; ///< Method: Get Specific platform Type features.
+ PF_IS_NB_PSTATE_ENABLED IsNbPstateEnabled; ///< Method: Get whether Northbridge PStates feature is enabled.
+ PF_NEXT_LINK_HAS_HTPHY_FEATS NextLinkHasHtPhyFeats; ///< Method: Iterate over HT Links matching features, for HT PHY entries.
+ PF_SET_HT_PHY_REGISTER SetHtPhyRegister; ///< Method: Set an Ht Phy register based on table entry.
+ PF_GET_NEXT_HT_LINK_FEATURES GetNextHtLinkFeatures; ///< Method: Iterate over HT links, returning link features.
+ REGISTER_TABLE **RegisterTableList; ///< Public Data: The available register tables.
+ TABLE_ENTRY_TYPE_DESCRIPTOR *TableEntryTypeDescriptors; ///< Public Data: implemented register table entry types.
+ PACKAGE_HTLINK_MAP PackageLinkMap; ///< Public Data: translate northbridge HT links to package level links, or NULL.
+ COMPUTE_UNIT_MAP *ComputeUnitMap; ///< Public Data: translate compute unit core pairing, or NULL.
+ FAMILY_CACHE_INIT_POLICY InitCacheDisabled; ///< Public Data: Family related information.
+ PF_GET_EARLY_INIT_TABLE GetEarlyInitBeforeApLaunchOnCoreTable; ///< Method: Get the initialization steps needed before AP launch.
+ PF_GET_EARLY_INIT_TABLE GetEarlyInitAfterApLaunchOnCoreTable; ///< Method: Get the initialization steps needed after AP launch.
+ BOOLEAN PatchLoaderIsSharedByCU; ///< Public Data: Indicate if patch loader is shared by Compute Unit
+};
+
+/**
+ * A Family Id and an interface to it's implementations of Family Specific Services.
+ *
+ * Note that this is a logical family id, which may specify family, model (or even stepping).
+ */
+typedef struct {
+ UINT64 Family; ///< The Family to which this interface belongs.
+ CONST VOID *TablePtr; ///< The interface to its Family Specific Services.
+} CPU_SPECIFIC_SERVICES_XLAT;
+
+/**
+ * A collection of Family specific interfaces to Family Specific services.
+ */
+typedef struct {
+ UINT8 Elements; ///< The number of tables to search.
+ CONST CPU_SPECIFIC_SERVICES_XLAT *FamilyTable; ///< The family interfaces.
+} CPU_FAMILY_SUPPORT_TABLE;
+
+/**
+ * Implement the translation of a logical CPU id to an id that can be used to get Family specific services.
+ */
+typedef struct {
+ UINT32 Family; ///< Provide translation for this family
+ CPU_LOGICAL_ID UnknownRevision; ///< In this family, unrecognized models (or steppings) are treated as though they were this model and stepping.
+ CONST PF_CPU_GET_SUBFAMILY_ID_ARRAY *SubFamilyIdTable; ///< Method: Get family specific model (and stepping) resolution.
+ UINT8 Elements; ///< The number of family specific model tables pointed to by SubFamilyIdTable
+} CPU_LOGICAL_ID_FAMILY_XLAT;
+
+/**
+ * A collection of all available family id translations.
+ */
+typedef struct {
+ UINT8 Elements; ///< The number of family translation items to search.
+ CONST CPU_LOGICAL_ID_FAMILY_XLAT *FamilyIdTable; ///< The family translation items.
+} CPU_FAMILY_ID_XLAT_TABLE;
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+/**
+ * Get a logical identifier for the specified processor, based on CPUID, but independent of CPUID formatting.
+ */
+VOID
+GetLogicalIdOfSocket (
+ IN UINT32 Socket,
+ OUT CPU_LOGICAL_ID *LogicalId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Get a logical identifier for the executing core, based on CPUID, but independent of CPUID formatting.
+ */
+VOID
+GetLogicalIdOfCurrentCore (
+ OUT CPU_LOGICAL_ID *LogicalId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Get a logical identifier for the specified CPUID value.
+ */
+VOID
+GetLogicalIdFromCpuid (
+ IN UINT32 RawCpuid,
+ OUT CPU_LOGICAL_ID *LogicalId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Retrieves a pointer to the desired processor's family specific services structure.
+ */
+VOID
+GetCpuServicesOfSocket (
+ IN UINT32 Socket,
+ OUT CONST CPU_SPECIFIC_SERVICES **FunctionTable,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Retrieves a pointer to the desired processor's family specific services structure.
+ */
+VOID
+GetFeatureServicesOfSocket (
+ IN CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+ IN UINT32 Socket,
+ OUT CONST VOID **CpuServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Retrieves a pointer to the executing core's family specific services structure.
+ */
+VOID
+GetCpuServicesOfCurrentCore (
+ OUT CONST CPU_SPECIFIC_SERVICES **FunctionTable,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Retrieves a pointer to the executing core's family specific services structure.
+ */
+VOID
+GetFeatureServicesOfCurrentCore (
+ IN CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+ OUT CONST VOID **CpuServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Retrieves a pointer to the family specific services structure for a processor
+ * with the given logical ID.
+ */
+VOID
+GetCpuServicesFromLogicalId (
+ IN CPU_LOGICAL_ID *LogicalId,
+ OUT CONST CPU_SPECIFIC_SERVICES **FunctionTable,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Retrieves a pointer to the family specific services structure for a processor
+ * with the given logical ID.
+ */
+VOID
+GetFeatureServicesFromLogicalId (
+ IN CPU_FAMILY_SUPPORT_TABLE *FamilyTable,
+ IN CPU_LOGICAL_ID *LogicalId,
+ OUT CONST VOID **CpuServices,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Used by logical families which don't need a certain register setting table or other data array.
+ */
+VOID
+GetEmptyArray (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ OUT CONST VOID **Empty,
+ OUT UINT8 *NumberOfElements,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _CPU_FAMILY_TRANSLATION_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuGeneralServices.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuGeneralServices.c
new file mode 100644
index 0000000..0b3c991
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuGeneralServices.c
@@ -0,0 +1,1286 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Implement External, AGESA Common, and CPU component General Services.
+ *
+ * Contains implementation of the interfaces: General Services API in AGESA.h,
+ * GeneralServices.h, and cpuServices.h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Options.h"
+#include "Topology.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuServices.h"
+#include "heapManager.h"
+#include "cpuApicUtilities.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_CPUGENERALSERVICES_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTIONS_CONFIG_TOPOLOGY TopologyConfiguration;
+extern BUILD_OPT_CFG UserOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S - External General Services API
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * Get a specified Core's APIC ID.
+ *
+ * Invoke corresponding Cpu Service for external user.
+ *
+ * @param[in,out] AmdParamApic Our interface struct
+ *
+ * @return The most severe status of any called service.
+ */
+AGESA_STATUS
+AmdGetApicId (
+ IN OUT AMD_APIC_PARAMS *AmdParamApic
+ )
+{
+ AGESA_STATUS AgesaStatus;
+
+ AGESA_TESTPOINT (TpIfAmdGetApicIdEntry, &AmdParamApic->StdHeader);
+ AmdParamApic->StdHeader.HeapBasePtr = HeapGetBaseAddress (&AmdParamApic->StdHeader);
+
+ AmdParamApic->IsPresent = GetApicId (
+ &AmdParamApic->StdHeader,
+ AmdParamApic->Socket,
+ AmdParamApic->Core,
+ &AmdParamApic->ApicAddress,
+ &AgesaStatus
+ );
+
+ AGESA_TESTPOINT (TpIfAmdGetApicIdExit, &AmdParamApic->StdHeader);
+ return AgesaStatus;
+}
+
+/**
+ * Get Processor Module's PCI Config Space address.
+ *
+ * Invoke corresponding Cpu Service for external user.
+ *
+ * @param[in,out] AmdParamGetPci Our interface struct
+ *
+ * @return The most severe status of any called service.
+ */
+AGESA_STATUS
+AmdGetPciAddress (
+ IN OUT AMD_GET_PCI_PARAMS *AmdParamGetPci
+ )
+{
+ AGESA_STATUS AgesaStatus;
+
+ AGESA_TESTPOINT (TpIfAmdGetPciAddressEntry, &AmdParamGetPci->StdHeader);
+ AmdParamGetPci->StdHeader.HeapBasePtr = HeapGetBaseAddress (&AmdParamGetPci->StdHeader);
+
+ AmdParamGetPci->IsPresent = GetPciAddress (
+ &AmdParamGetPci->StdHeader,
+ AmdParamGetPci->Socket,
+ AmdParamGetPci->Module,
+ &AmdParamGetPci->PciAddress,
+ &AgesaStatus
+ );
+
+ AGESA_TESTPOINT (TpIfAmdGetPciAddressExit, &AmdParamGetPci->StdHeader);
+ return AgesaStatus;
+}
+
+/**
+ * "Who am I" for the current running core.
+ *
+ * Invoke corresponding Cpu Service for external user.
+ *
+ * @param[in,out] AmdParamIdentify Our interface struct
+ *
+ * @return The most severe status of any called service.
+ */
+AGESA_STATUS
+AmdIdentifyCore (
+ IN OUT AMD_IDENTIFY_PARAMS *AmdParamIdentify
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 Core;
+
+ AGESA_TESTPOINT (TpIfAmdIdentifyCoreEntry, &AmdParamIdentify->StdHeader);
+ AmdParamIdentify->StdHeader.HeapBasePtr = HeapGetBaseAddress (&AmdParamIdentify->StdHeader);
+
+ IdentifyCore (
+ &AmdParamIdentify->StdHeader,
+ &Socket,
+ &Module,
+ &Core,
+ &AgesaStatus
+ );
+ AmdParamIdentify->Socket = (UINT8)Socket;
+ AmdParamIdentify->Module = (UINT8)Module;
+ AmdParamIdentify->Core = (UINT8)Core;
+
+ AGESA_TESTPOINT (TpIfAmdIdentifyCoreExit, &AmdParamIdentify->StdHeader);
+ return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S - AGESA common General Services
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get a specified Core's APIC ID.
+ *
+ * Code sync: This calculation MUST match the assignment
+ * calculation done in LocalApicInitializationAtEarly function.
+ *
+ * @param[in] StdHeader Header for library and services.
+ * @param[in] Socket The socket in which the Core's Processor is installed.
+ * @param[in] Core The Core id.
+ * @param[out] ApicAddress The Core's APIC ID.
+ * @param[out] AgesaStatus Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ * @retval TRUE The core is present, APIC Id valid
+ * @retval FALSE The core is not present, APIC Id not valid.
+*/
+BOOLEAN
+GetApicId (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT32 Socket,
+ IN UINT32 Core,
+ OUT UINT8 *ApicAddress,
+ OUT AGESA_STATUS *AgesaStatus
+ )
+{
+ BOOLEAN ReturnValue;
+ UINT32 CoreCount;
+ UINT32 ApicID;
+
+ ReturnValue = FALSE;
+ if (GetActiveCoresInGivenSocket (Socket, &CoreCount, StdHeader)) {
+ if (Core < CoreCount) {
+ ReturnValue = TRUE;
+ GetLocalApicIdForCore (Socket, Core, &ApicID, StdHeader);
+ *ApicAddress = (UINT8) ApicID;
+ }
+ }
+
+ // Always Succeeds.
+ *AgesaStatus = AGESA_SUCCESS;
+
+ return ReturnValue;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get Processor Module's PCI Config Space address.
+ *
+ * @param[in] StdHeader Header for library and services.
+ * @param[in] Socket The Core's Socket.
+ * @param[in] Module The Module in that Processor
+ * @param[out] PciAddress The Processor's PCI Config Space address (Function 0, Register 0)
+ * @param[out] AgesaStatus Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ * @retval TRUE The core is present, PCI Address valid
+ * @retval FALSE The core is not present, PCI Address not valid.
+ */
+BOOLEAN
+GetPciAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT32 Socket,
+ IN UINT32 Module,
+ OUT PCI_ADDR *PciAddress,
+ OUT AGESA_STATUS *AgesaStatus
+ )
+{
+ UINT8 Node;
+ BOOLEAN Result;
+
+ ASSERT (Socket < MAX_SOCKETS);
+ ASSERT (Module < MAX_DIES);
+
+ Result = TRUE;
+ // Always Succeeds.
+ *AgesaStatus = AGESA_SUCCESS;
+
+ if (GetNodeId (Socket, Module, &Node, StdHeader)) {
+ // socket is populated
+ PciAddress->AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+ PciAddress->Address.Device = PciAddress->Address.Device + Node;
+ } else {
+ // socket is not populated
+ PciAddress->AddressValue = ILLEGAL_SBDFO;
+ Result = FALSE;
+ }
+ return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * "Who am I" for the current running core.
+ *
+ * @param[in] StdHeader Header for library and services.
+ * @param[out] Socket The current Core's Socket
+ * @param[out] Module The current Core's Processor Module
+ * @param[out] Core The current Core's core id.
+ * @param[out] AgesaStatus Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ */
+VOID
+IdentifyCore (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT UINT32 *Socket,
+ OUT UINT32 *Module,
+ OUT UINT32 *Core,
+ OUT AGESA_STATUS *AgesaStatus
+ )
+{
+ AP_MAIL_INFO ApMailboxInfo;
+ UINT32 CurrentCore;
+
+ // Always Succeeds.
+ *AgesaStatus = AGESA_SUCCESS;
+
+ GetApMailbox (&ApMailboxInfo.Info, StdHeader);
+ ASSERT (ApMailboxInfo.Fields.Socket < MAX_SOCKETS);
+ ASSERT (ApMailboxInfo.Fields.Module < MAX_DIES);
+ *Socket = (UINT8)ApMailboxInfo.Fields.Socket;
+ *Module = (UINT8)ApMailboxInfo.Fields.Module;
+
+ // Get Core Id
+ GetCurrentCore (&CurrentCore, StdHeader);
+ *Core = (UINT8)CurrentCore;
+}
+
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S - cpu component General Services
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the current Platform's number of Sockets, regardless of how many are populated.
+ *
+ * The Options component can provide how many sockets are available in system.
+ * This can be used to avoid testing presence of Processors in Sockets which don't exist.
+ * The result can be one socket to the maximum possible sockets of any supported processor family.
+ * You cannot assume that all sockets contain a processor or that the sockets have processors
+ * installed in any particular order. Do not convert this number to a number of nodes.
+ *
+ * @return The number of available sockets for the platform.
+ *
+ */
+UINT32
+GetPlatformNumberOfSockets ( VOID )
+{
+ return TopologyConfiguration.PlatformNumberOfSockets;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the number of Modules to check presence in each Processor.
+ *
+ * The Options component can provide how many modules need to be check for presence in each
+ * processor, regardless whether all, or any, processor have that many modules present on this boot.
+ * The result can be one module to the maximum possible modules of any supported processor family.
+ * You cannot assume that Modules are in any particular order, especially with respect to node id.
+ *
+ * @return The maximum number of modules in each processor.
+ *
+ */
+UINT32
+GetPlatformNumberOfModules ( VOID )
+{
+ return TopologyConfiguration.PlatformNumberOfModules;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Is a processor present in Socket?
+ *
+ * Check to see if any possible module of the processor is present. This provides
+ * support for a few cases where a PCI address isn't needed, but code still needs to
+ * iterate by Socket.
+ *
+ * @param[in] Socket The socket which is being tested
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @retval TRUE The socket has a processor installed
+ * @retval FALSE The socket is empty (or the processor is dead).
+ *
+ */
+BOOLEAN
+IsProcessorPresent (
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ SOCKET_DIE_TO_NODE_MAP pSocketDieMap;
+ LOCATE_HEAP_PTR SocketDieHeapDataBlock;
+ BOOLEAN Result;
+ UINT32 Module;
+ AGESA_STATUS Status;
+
+ ASSERT (Socket < MAX_SOCKETS);
+ Result = FALSE;
+ SocketDieHeapDataBlock.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+
+ // Get data block from heap
+ Status = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+ pSocketDieMap = (SOCKET_DIE_TO_NODE_MAP)SocketDieHeapDataBlock.BufferPtr;
+ ASSERT ((pSocketDieMap != NULL) && (Status == AGESA_SUCCESS));
+ for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+ if ((*pSocketDieMap)[Socket][Module].Node != 0xFF) {
+ Result = TRUE;
+ break;
+ }
+ }
+ return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Provide the number of installed processors (not Nodes! and not Sockets!)
+ *
+ * Iterate over the Socket, Module to Node Map, counting the number of present nodes.
+ * Do not use this as a Node Count! Do not use this as the number of Sockets! (This
+ * is for APIC ID utilities.)
+ *
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @return the number of processors installed
+ *
+ */
+UINT32
+GetNumberOfProcessors (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ SOCKET_DIE_TO_NODE_MAP pSocketDieMap;
+ LOCATE_HEAP_PTR SocketDieHeapDataBlock;
+ UINT32 Result;
+ UINT32 Socket;
+ UINT32 Module;
+ AGESA_STATUS Status;
+
+ Result = 0;
+ SocketDieHeapDataBlock.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+
+ // Get data block from heap
+ Status = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+ pSocketDieMap = (SOCKET_DIE_TO_NODE_MAP)SocketDieHeapDataBlock.BufferPtr;
+ ASSERT ((pSocketDieMap != NULL) && (Status == AGESA_SUCCESS));
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+ if ((*pSocketDieMap)[Socket][Module].Node != 0xFF) {
+ Result++;
+ break;
+ }
+ }
+ }
+ return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * For a specific Node, get its Socket and Module ids.
+ *
+ * If asking for the current running Node, read the mailbox socket, module. Specific Node,
+ * locate the Node to Socket/Module Map in heap, and return the ids, if present.
+ *
+ * @param[in] Node What Socket and Module is this Node?
+ * @param[out] Socket The Socket containing that Node.
+ * @param[out] Module The Processor Module of that Node.
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @retval TRUE Node is present, Socket, Module are valid.
+ * @retval FALSE Node is not present, why do you ask?
+ */
+BOOLEAN
+GetSocketModuleOfNode (
+ IN UINT32 Node,
+ OUT UINT32 *Socket,
+ OUT UINT32 *Module,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ NODE_TO_SOCKET_DIE_MAP pNodeMap;
+ LOCATE_HEAP_PTR SocketDieHeapDataBlock;
+ BOOLEAN Result;
+ AGESA_STATUS Status;
+
+ Result = FALSE;
+
+ ASSERT (Node < MAX_NODES);
+
+ // Get Map from heap
+ SocketDieHeapDataBlock.BufferHandle = NODE_ID_MAP_HANDLE;
+ Status = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+ pNodeMap = (NODE_TO_SOCKET_DIE_MAP)SocketDieHeapDataBlock.BufferPtr;
+ ASSERT ((pNodeMap != NULL) && (Status == AGESA_SUCCESS));
+ *Socket = (*pNodeMap)[Node].Socket;
+ *Module = (*pNodeMap)[Node].Die;
+ if ((*pNodeMap)[Node].Socket != 0xFF) {
+ Result = TRUE;
+ }
+ return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the current core's Processor APIC Index.
+ *
+ * The Processor APIC Index is the position of the current processor in the APIC id
+ * assignment. Processors are ordered in node id order. This is not the same, however,
+ * as the node id of the current socket and module or the current socket id.
+ *
+ * @param[in] Node The current desired core's node id (usually the current core).
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @return Processor APIC Index
+ *
+ */
+UINT32
+GetProcessorApicIndex (
+ IN UINT32 Node,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 ProcessorApicIndex;
+ UINT32 PreviousSocket;
+ UINT32 CurrentSocket;
+ UINT32 Ignored;
+ UINT32 i;
+
+ ASSERT (Node < MAX_NODES);
+
+ // Calculate total APIC devices up to Current Node, Core.
+ ProcessorApicIndex = 0;
+ PreviousSocket = 0xFF;
+ for (i = 0; i < (Node + 1); i++) {
+ GetSocketModuleOfNode (i, &CurrentSocket, &Ignored, StdHeader);
+ if (CurrentSocket != PreviousSocket) {
+ ProcessorApicIndex++;
+ PreviousSocket = CurrentSocket;
+ }
+ }
+ // Convert to Index (zero based) from count (one based).
+ ProcessorApicIndex--;
+ return ProcessorApicIndex;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns current node number
+ *
+ * @param[out] Node This Core's Node id
+ * @param[in] StdHeader Header for library and services.
+ *
+ */
+VOID
+GetCurrentNodeNum (
+ OUT UINT32 *Node,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AP_MAIL_INFO ApMailboxInfo;
+
+ // Get the Node Id from the Mailbox.
+ GetApMailbox (&ApMailboxInfo.Info, StdHeader);
+ ASSERT (ApMailboxInfo.Fields.Node < MAX_NODES);
+ *Node = ApMailboxInfo.Fields.Node;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns Total number of active cores in the current socket
+ *
+ * @param[out] CoreCount The cores in this processor.
+ * @param[in] StdHeader Header for library and services.
+ *
+ */
+VOID
+GetActiveCoresInCurrentSocket (
+ OUT UINT32 *CoreCount,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPUID_DATA CpuidDataStruct;
+ UINT32 TotalCoresCount;
+
+ LibAmdCpuidRead (AMD_CPUID_ASIZE_PCCOUNT, &CpuidDataStruct, StdHeader);
+ TotalCoresCount = (CpuidDataStruct.ECX_Reg & 0x000000FF) + 1;
+ *CoreCount = TotalCoresCount;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Provides the Total number of active cores in the current core's node.
+ *
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @return The current node core count
+ */
+UINTN
+GetActiveCoresInCurrentModule (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 Core;
+ UINT32 LowCore;
+ UINT32 HighCore;
+ UINT32 ProcessorCoreCount;
+ AGESA_STATUS AgesaStatus;
+
+ ProcessorCoreCount = 0;
+
+ IdentifyCore (StdHeader, &Socket, &Module, &Core, &AgesaStatus);
+ if (GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader)) {
+ ProcessorCoreCount = ((HighCore - LowCore) + 1);
+ }
+ return ProcessorCoreCount;
+}
+
+/**
+ * Provide the number of compute units on current module.
+ *
+ *
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @return The current compute unit counts.
+ *
+ */
+UINTN
+GetNumberOfCompUnitsInCurrentModule (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 CurrentCore;
+ UINT32 ComputeUnitCount;
+ UINT32 Enabled;
+ COMPUTE_UNIT_MAPPING ComputeUnitMapping;
+ AGESA_STATUS IgnoredSts;
+ LOCATE_HEAP_PTR SocketDieHeapDataBlock;
+ SOCKET_DIE_TO_NODE_MAP pSocketDieMap;
+
+ ComputeUnitCount = 0;
+ ComputeUnitMapping = GetComputeUnitMapping (StdHeader);
+ ASSERT ((ComputeUnitMapping == AllCoresMapping) ||
+ (ComputeUnitMapping == EvenCoresMapping) ||
+ (ComputeUnitMapping == TripleCoresMapping) ||
+ (ComputeUnitMapping == QuadCoresMapping));
+
+ IdentifyCore (StdHeader, &Socket, &Module, &CurrentCore, &IgnoredSts);
+ // Get data block from heap
+ SocketDieHeapDataBlock.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+ IgnoredSts = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+ pSocketDieMap = (SOCKET_DIE_TO_NODE_MAP)SocketDieHeapDataBlock.BufferPtr;
+ ASSERT ((pSocketDieMap != NULL) && (IgnoredSts == AGESA_SUCCESS));
+ // Current Core's socket, module must be present.
+ ASSERT ((*pSocketDieMap)[Socket][Module].Node != 0xFF);
+ // Process compute unit info
+ Enabled = (*pSocketDieMap)[Socket][Module].EnabledComputeUnits;
+
+ while (Enabled > 0) {
+ if ((Enabled & 0x1) != 0) {
+ ComputeUnitCount++;
+ }
+ Enabled >>= 1;
+ }
+
+ return ComputeUnitCount;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Provides the Total number of active cores in the given socket.
+ *
+ * @param[in] Socket Get a core count for the processor in this socket.
+ * @param[out] CoreCount Its core count
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @retval TRUE A processor is present in the Socket and the CoreCount is valid.
+ * @retval FALSE The Socket does not have a Processor
+ */
+BOOLEAN
+GetActiveCoresInGivenSocket (
+ IN UINT32 Socket,
+ OUT UINT32 *CoreCount,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Module;
+ UINT32 LowCore;
+ UINT32 HighCore;
+ UINT32 ProcessorCoreCount;
+ BOOLEAN Result;
+
+ Result = FALSE;
+ ProcessorCoreCount = 0;
+
+ for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+ if (GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader)) {
+ ProcessorCoreCount = ProcessorCoreCount + ((HighCore - LowCore) + 1);
+ Result = TRUE;
+ } else {
+ break;
+ }
+ }
+ *CoreCount = ProcessorCoreCount;
+ return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Provides the range of Cores in a Processor which are in a Module.
+ *
+ * Cores are named uniquely in a processor, 0 to TotalCores. Any module in the processor has
+ * a set of those cores, named from LowCore to HighCore.
+ *
+ * @param[in] Socket Get a core range for the processor in this socket.
+ * @param[in] Module Get a core range for this Module in the processor.
+ * @param[out] LowCore The lowest Processor Core in the Module.
+ * @param[out] HighCore The highest Processor Core in the Module.
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @retval TRUE A processor is present in the Socket and the Core Range is valid.
+ * @retval FALSE The Socket does not have a Processor
+ */
+BOOLEAN
+GetGivenModuleCoreRange (
+ IN UINT32 Socket,
+ IN UINT32 Module,
+ OUT UINT32 *LowCore,
+ OUT UINT32 *HighCore,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ SOCKET_DIE_TO_NODE_MAP pSocketDieMap;
+ LOCATE_HEAP_PTR SocketDieHeapDataBlock;
+ BOOLEAN Result;
+ AGESA_STATUS Status;
+
+ ASSERT (Socket < MAX_SOCKETS);
+ ASSERT (Module < MAX_DIES);
+ Result = FALSE;
+ SocketDieHeapDataBlock.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+
+ // Get data block from heap
+ Status = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+ pSocketDieMap = (SOCKET_DIE_TO_NODE_MAP)SocketDieHeapDataBlock.BufferPtr;
+ ASSERT ((pSocketDieMap != NULL) && (Status == AGESA_SUCCESS));
+ *LowCore = (*pSocketDieMap)[Socket][Module].LowCore;
+ *HighCore = (*pSocketDieMap)[Socket][Module].HighCore;
+ if ((*pSocketDieMap)[Socket][Module].Node != 0xFF) {
+ Result = TRUE;
+ }
+ return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns the current running core number.
+ *
+ * @param[out] Core The core id.
+ * @param[in] StdHeader Header for library and services.
+ *
+ */
+VOID
+GetCurrentCore (
+ OUT UINT32 *Core,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CPUID_DATA CpuidDataStruct;
+ UINT32 LocalApicId;
+ UINT32 ApicIdCoreIdSize;
+ CORE_ID_POSITION InitApicIdCpuIdLo;
+ CPU_SPECIFIC_SERVICES *FamilyServices;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+
+ // Read CPUID ebx[31:24] to get initial APICID
+ LibAmdCpuidRead (AMD_CPUID_APICID_LPC_BID, &CpuidDataStruct, StdHeader);
+ LocalApicId = (CpuidDataStruct.EBX_Reg & 0xFF000000) >> 24;
+
+ // Find the core ID size.
+ LibAmdCpuidRead (AMD_CPUID_ASIZE_PCCOUNT, &CpuidDataStruct, StdHeader);
+ ApicIdCoreIdSize = (CpuidDataStruct.ECX_Reg & 0x0000F000) >> 12;
+
+ InitApicIdCpuIdLo = FamilyServices->CoreIdPositionInInitialApicId (FamilyServices, StdHeader);
+ ASSERT (InitApicIdCpuIdLo < CoreIdPositionMax);
+
+ // Now extract the core ID from the Apic ID by right justifying the id and masking off non-core Id bits.
+ *Core = ((LocalApicId >> ((1 - (UINT32)InitApicIdCpuIdLo) * (MAX_CORE_ID_SIZE - ApicIdCoreIdSize))) &
+ (MAX_CORE_ID_MASK >> (MAX_CORE_ID_SIZE - ApicIdCoreIdSize)));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns current node, and core number.
+ *
+ * @param[out] Node The node id of the current core's node.
+ * @param[out] Core The core id if the current core.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+GetCurrentNodeAndCore (
+ OUT UINT32 *Node,
+ OUT UINT32 *Core,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ // Get Node Id
+ GetCurrentNodeNum (Node, StdHeader);
+
+ // Get Core Id
+ GetCurrentCore (Core, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Is the current core a primary core of it's node?
+ *
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ * @retval TRUE Is Primary Core
+ * @retval FALSE Is not Primary Core
+ *
+ */
+BOOLEAN
+IsCurrentCorePrimary (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BOOLEAN Result;
+ UINT32 Core;
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 PrimaryCore;
+ UINT32 IgnoredCore;
+ AGESA_STATUS IgnoredSts;
+
+ Result = FALSE;
+
+ IdentifyCore (StdHeader, &Socket, &Module, &Core, &IgnoredSts);
+ GetGivenModuleCoreRange (Socket, Module, &PrimaryCore, &IgnoredCore, StdHeader);
+ if (Core == PrimaryCore) {
+ Result = TRUE;
+ }
+ return Result;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Returns node id based on SocketId and ModuleId.
+ *
+ * @param[in] SocketId The socket to look up
+ * @param[in] ModuleId The module in that socket
+ * @param[out] NodeId Provide the corresponding Node Id.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval TRUE The socket is populated
+ * @retval FALSE The socket is not populated
+ *
+ */
+BOOLEAN
+GetNodeId (
+ IN UINT32 SocketId,
+ IN UINT32 ModuleId,
+ OUT UINT8 *NodeId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ SOCKET_DIE_TO_NODE_MAP pSocketDieMap;
+ LOCATE_HEAP_PTR SocketDieHeapDataBlock;
+ BOOLEAN Result;
+ AGESA_STATUS Status;
+
+ Result = FALSE;
+ SocketDieHeapDataBlock.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+
+ // Get data block from heap
+ Status = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+ pSocketDieMap = (SOCKET_DIE_TO_NODE_MAP)SocketDieHeapDataBlock.BufferPtr;
+ ASSERT ((pSocketDieMap != NULL) && (Status == AGESA_SUCCESS));
+ *NodeId = (*pSocketDieMap)[SocketId][ModuleId].Node;
+ if ((*pSocketDieMap)[SocketId][ModuleId].Node != 0xFF) {
+ Result = TRUE;
+ }
+ return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the cached AP Mailbox Info if available, or read the info from the hardware.
+ *
+ * Locate the known AP Mailbox Info Cache buffer in this core's local heap. If it
+ * doesn't exist, read the hardware to get the info.
+ * This routine gets the main AP mailbox, not the system degree.
+ *
+ * @param[out] ApMailboxInfo Provide the info in this AP core's mailbox
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+GetApMailbox (
+ OUT UINT32 *ApMailboxInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Node;
+ BOOLEAN IamBsp;
+ AGESA_STATUS Ignored;
+ AP_MAILBOXES ApMailboxes;
+ LOCATE_HEAP_PTR ApMailboxCache;
+ CPU_SPECIFIC_SERVICES *FamilyServices;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+ IamBsp = IsBsp (StdHeader, &Ignored);
+ ASSERT (FamilyServices != NULL);
+ ApMailboxCache.BufferHandle = AP_MAIL_BOX_CACHE_HANDLE;
+ if (HeapLocateBuffer (&ApMailboxCache, StdHeader) == AGESA_SUCCESS) {
+ // If during HEAP_LOCAL_CACHE stage, we get ApMailbox from the local heap.
+ // If after HEAP_LOCAL_CACHE stage, we get ApMailbox from the BSP's heap (since
+ // it maintains a copy of each Node's mailboxes. Note: All cores on each node
+ // share the same data stored in each node's ApMailbox struct.
+ Node = FamilyServices->GetStoredNodeNumber (FamilyServices, StdHeader);
+ ASSERT (Node < MAX_NODES);
+ *ApMailboxInfo = ((AP_MAILBOXES *) ApMailboxCache.BufferPtr)[Node].ApMailInfo.Info;
+ ASSERT (*ApMailboxInfo != 0xFFFFFFFF);
+ } else if (!IamBsp) {
+ // If this is an AP, the hardware register should be good.
+ ASSERT (StdHeader->HeapStatus == HEAP_LOCAL_CACHE);
+ FamilyServices->GetApMailboxFromHardware (FamilyServices, &ApMailboxes, StdHeader);
+ *ApMailboxInfo = ApMailboxes.ApMailInfo.Info;
+ } else {
+ // This is the BSC. The hardware mailbox has not been set up yet.
+ ASSERT (FALSE);
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Cache the Ap Mailbox info in our local heap for later use.
+ *
+ * This enables us to use the info even after the mailbox register is initialized
+ * with operational values. Get all the AP mailboxes and keep them in one buffer.
+ *
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+CacheApMailbox (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINTN MboxIndex;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ AP_MAILBOXES ApMailboxes;
+ CPU_SPECIFIC_SERVICES *FamilyServices;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+
+ // Get mailbox from hardware.
+ FamilyServices->GetApMailboxFromHardware (FamilyServices, &ApMailboxes, StdHeader);
+
+ // Allocate heap for the info
+ AllocHeapParams.RequestedBufferSize = (sizeof (AP_MAILBOXES)) * MAX_NODES;
+ AllocHeapParams.BufferHandle = AP_MAIL_BOX_CACHE_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+ for (MboxIndex = 0; MboxIndex < MAX_NODES; MboxIndex++) {
+ // Replicate the same data for each entry in this array, just to make sure
+ // each index in this array is initialized...and also to prevent us
+ // from accidentally reading incorrect data.
+ ((AP_MAILBOXES *) AllocHeapParams.BufferPtr)[MboxIndex] = ApMailboxes;
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Cache the mailboxes for all nodes and store them in the BSP's heap
+ *
+ * This enables us to use the info even after the mailbox register is initialized
+ * with operational values. Get all the AP mailboxes and keep them in one buffer.
+ *
+ * @param[in] StdHeader Config handle for library and services.
+ * @param[in] ApMailboxes Pointer to the array which contains the mbox info for ALL
+ * available nodes.
+ * @param[in] NumberOfNodes Number of nodes discovered in the system.
+ *
+ */
+VOID
+CacheBspMailbox (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AP_MAILBOXES *ApMailboxes,
+ IN UINT8 NumberOfNodes
+ )
+{
+ UINTN MboxIndex;
+ UINT32 Socket;
+ UINT32 Module;
+ AP_MAILBOXES InvalidMailbox;
+ AP_MAILBOXES *MailboxInHeap;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ // Even though the bsc does not need to send itself a heap index, this sequence performs other important initialization.
+ // Use '0' as a dummy heap index value.
+ GetSocketModuleOfNode (0, &Socket, &Module, StdHeader);
+ GetCpuServicesOfSocket (Socket, (CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->SetApCoreNumber (FamilySpecificServices, Socket, Module, 0, StdHeader);
+ FamilySpecificServices->TransferApCoreNumber (FamilySpecificServices, StdHeader);
+
+ // Allocate heap for the info
+ AllocHeapParams.RequestedBufferSize = (sizeof (AP_MAILBOXES)) * MAX_NODES;
+ AllocHeapParams.BufferHandle = AP_MAIL_BOX_CACHE_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+ MailboxInHeap = (AP_MAILBOXES *) AllocHeapParams.BufferPtr;
+ // Go through each entry in the Node/Mbox array and write it out to the BSP's heap.
+ for (MboxIndex = 0; MboxIndex < NumberOfNodes; MboxIndex++) {
+ MailboxInHeap[MboxIndex] = ApMailboxes[MboxIndex];
+ }
+ InvalidMailbox.ApMailInfo.Info = 0xFFFFFFFF;
+ InvalidMailbox.ApMailExtInfo.Info = 0xFFFFFFFF;
+ for (; MboxIndex < MAX_NODES; MboxIndex++) {
+ MailboxInHeap[MboxIndex] = InvalidMailbox;
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Compute the degree of the system.
+ *
+ * The degree of a system is the maximum degree of any node. The degree of a node is the
+ * number of nodes to which it is directly connected (not considering width or redundant
+ * links).
+ *
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+UINTN
+GetSystemDegree (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 Node;
+ UINT32 Core;
+ UINT32 Socket;
+ UINT32 Module;
+ BOOLEAN NodeStatus;
+ AGESA_STATUS IdStatus;
+ AP_MAILBOXES *ApMailboxes;
+ LOCATE_HEAP_PTR ApMailboxCache;
+ AGESA_STATUS Status;
+
+ // Identify current core
+ IdentifyCore (StdHeader, &Socket, &Module, &Core, &IdStatus);
+ NodeStatus = GetNodeId (Socket, Module, &Node, StdHeader);
+ // Get data block from heap
+ ApMailboxCache.BufferHandle = AP_MAIL_BOX_CACHE_HANDLE;
+ Status = HeapLocateBuffer (&ApMailboxCache, StdHeader);
+ // non-Success handled by ASSERT not NULL below.
+ ApMailboxes = (AP_MAILBOXES *) ApMailboxCache.BufferPtr;
+ ASSERT ((ApMailboxes != NULL) && (Status == AGESA_SUCCESS) && (IdStatus == AGESA_SUCCESS) && NodeStatus);
+ return ApMailboxes[Node].ApMailExtInfo.Fields.SystemDegree;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Spins until the number of microseconds specified have
+ * expired regardless of CPU operational frequency.
+ *
+ * @param[in] Microseconds Wait time in microseconds
+ * @param[in] StdHeader Header for library and services
+ *
+ */
+VOID
+WaitMicroseconds (
+ IN UINT32 Microseconds,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 TscRateInMhz;
+ UINT64 NumberOfTicks;
+ UINT64 InitialTsc;
+ UINT64 CurrentTsc;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ LibAmdMsrRead (TSC, &InitialTsc, StdHeader);
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->GetTscRate (FamilySpecificServices, &TscRateInMhz, StdHeader);
+ NumberOfTicks = Microseconds * TscRateInMhz;
+ do {
+ LibAmdMsrRead (TSC, &CurrentTsc, StdHeader);
+ } while ((CurrentTsc - InitialTsc) < NumberOfTicks);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * A boolean function determine executed CPU is BSP core.
+ *
+ * @param[in,out] StdHeader Header for library and services
+ * @param[out] AgesaStatus Aggregates AGESA_STATUS for external interface, Always Succeeds.
+ *
+ */
+BOOLEAN
+IsBsp (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ OUT AGESA_STATUS *AgesaStatus
+ )
+{
+ UINT64 MsrData;
+
+ // Always Succeeds.
+ *AgesaStatus = AGESA_SUCCESS;
+
+ // Read APIC_BASE register (0x1B), bit[8] returns 1 for BSP
+ LibAmdMsrRead (MSR_APIC_BAR, &MsrData, StdHeader);
+ if ((MsrData & BIT8) != 0 ) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the compute unit mapping algorithm.
+ *
+ * Look up the compute unit values for the current core's socket/module and find the matching
+ * core pair map item. This will tell us how to determine the core's status.
+ *
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval AllCoresMapping Each core is in a compute unit of its own.
+ * @retval EvenCoresMapping Even/Odd pairs of cores are in each compute unit.
+ */
+COMPUTE_UNIT_MAPPING
+GetComputeUnitMapping (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 CurrentCore;
+ UINT32 Module;
+ UINT32 Socket;
+ UINT8 Enabled;
+ UINT8 DualCore;
+ UINT8 TripleCore;
+ UINT8 QuadCore;
+ AGESA_STATUS IgnoredSts;
+ SOCKET_DIE_TO_NODE_MAP pSocketDieMap;
+ LOCATE_HEAP_PTR SocketDieHeapDataBlock;
+ CPU_SPECIFIC_SERVICES *FamilyServices;
+ COMPUTE_UNIT_MAP *ComputeUnitMap;
+ COMPUTE_UNIT_MAPPING Result;
+
+ // Invalid mapping, unless we find one.
+ Result = MaxComputeUnitMapping;
+
+ IdentifyCore (StdHeader, &Socket, &Module, &CurrentCore, &IgnoredSts);
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+
+ // Get data block from heap
+ SocketDieHeapDataBlock.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+ IgnoredSts = HeapLocateBuffer (&SocketDieHeapDataBlock, StdHeader);
+ pSocketDieMap = (SOCKET_DIE_TO_NODE_MAP)SocketDieHeapDataBlock.BufferPtr;
+ ASSERT ((pSocketDieMap != NULL) && (IgnoredSts == AGESA_SUCCESS));
+ // Current Core's socket, module must be present.
+ ASSERT ((*pSocketDieMap)[Socket][Module].Node != 0xFF);
+
+ // Process compute unit info
+ Enabled = (*pSocketDieMap)[Socket][Module].EnabledComputeUnits;
+ DualCore = (*pSocketDieMap)[Socket][Module].DualCoreComputeUnits;
+ TripleCore = (*pSocketDieMap)[Socket][Module].TripleCoreComputeUnits;
+ QuadCore = (*pSocketDieMap)[Socket][Module].QuadCoreComputeUnits;
+ ComputeUnitMap = FamilyServices->ComputeUnitMap;
+ if ((Enabled != 0) && (ComputeUnitMap != NULL)) {
+ while (ComputeUnitMap->Mapping != MaxComputeUnitMapping) {
+ if ((Enabled == ComputeUnitMap->Enabled) &&
+ ((DualCore == ComputeUnitMap->DualCore) || (ComputeUnitMap->DualCore == 'x')) &&
+ ((TripleCore == ComputeUnitMap->TripleCore) || (ComputeUnitMap->TripleCore == 'x')) &&
+ ((QuadCore == ComputeUnitMap->QuadCore) || (ComputeUnitMap->QuadCore == 'x'))) {
+ break;
+ }
+ ComputeUnitMap++;
+ }
+ // The assert is for finding a processor configured in a way the compute unit map doesn't support.
+ ASSERT (ComputeUnitMap->Mapping != MaxComputeUnitMapping);
+ Result = ComputeUnitMap->Mapping;
+ } else {
+ // Families that don't have compute units act as though each core is in its own compute unit
+ // and all cores are primary
+ Result = AllCoresMapping;
+ }
+ return Result;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Is current core the primary core of its compute unit?
+ *
+ * Get the mapping algorithm and the current core number. Selecting First/Last ordering for
+ * primary @b ASSUMES cores are launched in ascending core number order.
+ *
+ * @param[in] Selector Select whether first or last core has the primary core role.
+ * @param[in] StdHeader Header for library and services
+ *
+ * @retval TRUE This is the primary core of a compute unit.
+ * @retval FALSE This is the second shared core of a compute unit.
+ *
+ */
+BOOLEAN
+IsCoreComputeUnitPrimary (
+ IN COMPUTE_UNIT_PRIMARY_SELECTOR Selector,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BOOLEAN Result;
+ UINT32 CurrentCore;
+ UINT32 Module;
+ UINT32 Socket;
+ AGESA_STATUS IgnoredSts;
+
+ IdentifyCore (StdHeader, &Socket, &Module, &CurrentCore, &IgnoredSts);
+
+ Result = FALSE;
+ switch (GetComputeUnitMapping (StdHeader)) {
+ case AllCoresMapping:
+ // All cores are primaries
+ Result = TRUE;
+ break;
+ case EvenCoresMapping:
+ // Even core numbers are first to execute, odd cores are last to execute
+ if (Selector == FirstCoreIsComputeUnitPrimary) {
+ Result = (BOOLEAN) ((CurrentCore & 1) == 0);
+ } else {
+ Result = (BOOLEAN) ((CurrentCore & 1) != 0);
+ }
+ break;
+ case TripleCoresMapping:
+ if (Selector == FirstCoreIsComputeUnitPrimary) {
+ Result = (BOOLEAN) ((CurrentCore % 3) == 0);
+ } else {
+ Result = (BOOLEAN) ((CurrentCore % 3) == 2);
+ }
+ break;
+ case QuadCoresMapping:
+ if (Selector == FirstCoreIsComputeUnitPrimary) {
+ Result = (BOOLEAN) ((CurrentCore % 4) == 0);
+ } else {
+ Result = (BOOLEAN) ((CurrentCore % 4) == 3);
+ }
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ return Result;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * This routine programs the registers necessary to get the PCI MMIO mechanism
+ * up and functioning.
+ *
+ * @param[in] StdHeader Pointer to structure containing the function call
+ * whose parameter structure is to be created, the
+ * allocation method, and a pointer to the newly
+ * created structure.
+ *
+ */
+VOID
+InitializePciMmio (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 EncodedSize;
+ UINT64 LocalMsrRegister;
+
+ // Make sure that Standard header is valid
+ ASSERT (StdHeader != NULL);
+
+ if ((UserOptions.CfgPciMmioAddress != 0) && (UserOptions.CfgPciMmioSize != 0)) {
+ EncodedSize = LibAmdBitScanForward (UserOptions.CfgPciMmioSize);
+ LocalMsrRegister = ((UserOptions.CfgPciMmioAddress | BIT0) | (EncodedSize << 2));
+ LibAmdMsrWrite (MSR_MMIO_Cfg_Base, &LocalMsrRegister, StdHeader);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuLateInit.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuLateInit.c
new file mode 100644
index 0000000..9e0451d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuLateInit.c
@@ -0,0 +1,289 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Late Init API
+ *
+ * Contains code for doing any late CPU initialization.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_CPU_CPULATEINIT_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+DisableCf8ExtCfg (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Performs CPU related initialization at the late entry point
+ *
+ * This function should be the last function run by the AGESA
+ * CPU module and prepares the processor for the operating system
+ * bootstrap load process.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ *
+ * @retval AGESA_SUCCESS
+ *
+ */
+AGESA_STATUS
+AmdCpuLate (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig
+ )
+{
+ DisableCf8ExtCfg (StdHeader);
+ return (AGESA_SUCCESS);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Clear EnableCf8ExtCfg on all socket
+ *
+ * Clear F3x8C bit 14 EnableCf8ExtCfg
+ *
+ * @param[in] StdHeader Config handle for library and services
+ *
+ *
+ */
+VOID
+DisableCf8ExtCfg (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ PCI_ADDR PciAddress;
+ UINT32 Socket;
+ UINT32 Module;
+ UINT32 PciData;
+ UINT32 LegacyPciAccess;
+
+ ASSERT (IsBsp (StdHeader, &AgesaStatus));
+
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+ if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &AgesaStatus)) {
+ PciAddress.Address.Function = FUNC_3;
+ PciAddress.Address.Register = NB_CFG_HIGH_REG;
+ LegacyPciAccess = ((1 << 31) + (PciAddress.Address.Register & 0xFC) + (PciAddress.Address.Function << 8) + (PciAddress.Address.Device << 11) + (PciAddress.Address.Bus << 16) + ((PciAddress.Address.Register & 0xF00) << (24 - 8)));
+ // read from PCI register
+ LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
+ LibAmdIoRead (AccessWidth32, IOCFC, &PciData, StdHeader);
+ // Disable Cf8ExtCfg
+ PciData &= 0xFFFFBFFF;
+ // write to PCI register
+ LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
+ LibAmdIoWrite (AccessWidth32, IOCFC, &PciData, StdHeader);
+ }
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Calculate an ACPI style checksum
+ *
+ * Computes the checksum and stores the value to the checksum
+ * field of the passed in ACPI table's header.
+ *
+ * @param[in] Table ACPI table to checksum
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+VOID
+ChecksumAcpiTable (
+ IN OUT ACPI_TABLE_HEADER *Table,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *BuffTempPtr;
+ UINT8 Checksum;
+ UINT32 BufferOffset;
+
+ Table->Checksum = 0;
+ Checksum = 0;
+ BuffTempPtr = (UINT8 *) Table;
+ for (BufferOffset = 0; BufferOffset < Table->TableLength; BufferOffset++) {
+ Checksum = Checksum - *(BuffTempPtr + BufferOffset);
+ }
+
+ Table->Checksum = Checksum;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Run code on every AP in the system.
+ *
+ * @param[in] ApParams AP task pointer.
+ * @param[in] StdHeader Handle to config for library and services
+ *
+ * @return The most severe AGESA_STATUS returned by an AP.
+ *
+ */
+AGESA_STATUS
+RunLateApTaskOnAllAPs (
+ IN AP_EXE_PARAMS *ApParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 NumberOfSockets;
+ UINT32 NumberOfCores;
+ UINT8 Socket;
+ UINT8 Core;
+ UINT8 ApicId;
+ UINT32 BscSocket;
+ UINT32 Ignored;
+ UINT32 BscCoreNum;
+ AGESA_STATUS CalledStatus;
+ AGESA_STATUS IgnoredStatus;
+ AGESA_STATUS AgesaStatus;
+
+ ASSERT (IsBsp (StdHeader, &IgnoredStatus));
+
+ AgesaStatus = AGESA_SUCCESS;
+
+ IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredStatus);
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+ for (Core = 0; Core < NumberOfCores; Core++) {
+ if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+ GetApicId (StdHeader, Socket, Core, &ApicId, &IgnoredStatus);
+ AGESA_TESTPOINT (TpIfBeforeRunApFromAllAps, StdHeader);
+ CalledStatus = AgesaRunFcnOnAp ((UINTN) ApicId, ApParams);
+ AGESA_TESTPOINT (TpIfAfterRunApFromAllAps, StdHeader);
+ if (CalledStatus > AgesaStatus) {
+ AgesaStatus = CalledStatus;
+ }
+ }
+ }
+ }
+ }
+ return AgesaStatus;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Run code on core 0 of every socket in the system.
+ *
+ * @param[in] ApParams AP task pointer.
+ * @param[in] StdHeader Handle to config for library and services
+ *
+ * @return The most severe AGESA_STATUS returned by an AP.
+ *
+ */
+AGESA_STATUS
+RunLateApTaskOnAllCore0s (
+ IN AP_EXE_PARAMS *ApParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 NumberOfSockets;
+ UINT8 Socket;
+ UINT8 ApicId;
+ UINT32 BscSocket;
+ UINT32 IgnoredModule;
+ UINT32 IgnoredCore;
+ AGESA_STATUS CalledStatus;
+ AGESA_STATUS IgnoredStatus;
+ AGESA_STATUS AgesaStatus;
+
+ ASSERT (IsBsp (StdHeader, &IgnoredStatus));
+
+ AgesaStatus = AGESA_SUCCESS;
+
+ IdentifyCore (StdHeader, &BscSocket, &IgnoredModule, &IgnoredCore, &IgnoredStatus);
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ if (Socket != BscSocket) {
+ GetApicId (StdHeader, Socket, 0, &ApicId, &IgnoredStatus);
+ AGESA_TESTPOINT (TpIfBeforeRunApFromAllCore0s, StdHeader);
+ CalledStatus = AgesaRunFcnOnAp ((UINTN) ApicId, ApParams);
+ AGESA_TESTPOINT (TpIfAfterRunApFromAllCore0s, StdHeader);
+ if (CalledStatus > AgesaStatus) {
+ AgesaStatus = CalledStatus;
+ }
+ }
+ }
+ }
+ return AgesaStatus;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuLateInit.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuLateInit.h
new file mode 100644
index 0000000..b27ed00
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuLateInit.h
@@ -0,0 +1,1137 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Late Init API functions Prototypes.
+ *
+ * Contains code for doing any late CPU initialization
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_LATE_INIT_H_
+#define _CPU_LATE_INIT_H_
+
+#include "Filecode.h"
+
+// Forward declaration needed for multi-structure mutual references.
+AGESA_FORWARD_DECLARATION (PROC_FAMILY_TABLE);
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+//----------------------------------------------------------------------------
+// DMI DEFINITIONS AND MACROS
+//
+//----------------------------------------------------------------------------
+#define AP_LATE_TASK_GET_TYPE4_TYPE7 (PROC_CPU_FEATURE_CPUDMI_FILECODE)
+// SMBIOS constant definition
+#define CENTRAL_PROCESSOR 0x03
+#define EXTERNAL_CLOCK_DFLT 200
+#define EXTERNAL_CLOCK_100MHZ 100
+#define P_FAMILY_UNKNOWN 0x02
+#define P_ENGINEERING_SAMPLE 0x00
+#define P_CHARACTERISTICS 0x4
+#define CACHE_CFG_L1 0x180
+#define CACHE_CFG_L2 0x181
+#define CACHE_CFG_L3 0x182
+#define SRAM_TYPE 0x10
+#define ERR_CORRECT_TYPE 0x06
+#define CACHE_TYPE 0x05
+#define DMI_ASSOCIATIVE_OTHER 0x01
+#define DMI_ASSOCIATIVE_UNKNOWN 0x02
+#define DMI_ASSOCIATIVE_DIRECT_MAPPED 0x03
+#define DMI_ASSOCIATIVE_2_WAY 0x04
+#define DMI_ASSOCIATIVE_4_WAY 0x05
+#define DMI_ASSOCIATIVE_FULLY 0x06
+#define DMI_ASSOCIATIVE_8_WAY 0x07
+#define DMI_ASSOCIATIVE_16_WAY 0x08
+#define DMI_ASSOCIATIVE_12_WAY 0x09
+#define DMI_ASSOCIATIVE_24_WAY 0x0A
+#define DMI_ASSOCIATIVE_32_WAY 0x0B
+#define DMI_ASSOCIATIVE_48_WAY 0x0C
+#define DMI_ASSOCIATIVE_64_WAY 0x0D
+#define DMI_ASSOCIATIVE_20_WAY 0x0E
+#define SOCKET_POPULATED 0x40
+#define CPU_STATUS_UNKNOWN 0x00
+#define CPU_STATUS_ENABLED 0x01
+
+// Processor Upgrade Definition
+#define P_UPGRADE_UNKNOWN 0x02
+#define P_UPGRADE_NONE 0x06
+#define P_UPGRADE_S1GX 0x16
+#define P_UPGRADE_AM2 0x17
+#define P_UPGRADE_F1207 0x18
+#define P_UPGRADE_G34 0x1A
+#define P_UPGRADE_AM3 0x1B
+#define P_UPGRADE_C32 0x1C
+#define P_UPGRADE_FS1 0x27
+#define P_UPGRADE_FM1 0x29
+#define P_UPGRADE_FM2 0x2A
+
+//----------------------------------------------------------------------------
+// SRAT DEFINITIONS AND MACROS
+//
+//----------------------------------------------------------------------------
+#define NorthbridgeCapabilities 0xE8
+#define DRAMBase0 0x40
+#define MMIOBase0 0x80
+#define TOP_MEM 0xC001001Aul
+#define LOW_NODE_DEVICEID 24
+#define LOW_APICID 0
+
+
+// Miscellaneous AMD related values
+#define MAX_NUMBER_NODES 8
+
+// Flags
+#define ENABLED 1 // Bit 0
+#define DISABLED 0 // Bit 0
+#define HOTPLUGGABLE 2 // Bit 1
+
+// Affinity Entry Structures
+#define AE_APIC 0
+#define AE_MEMORY 1
+
+
+// Memory Types
+#define TYPE_MEMORY 1
+#define TYPE_RESERVED 2
+#define TYPE_ACPI 3
+#define TYPE_NVS 4
+
+//----------------------------------------------------------------------------
+// SLIT DEFINITIONS AND MACROS
+//
+//----------------------------------------------------------------------------
+#define PROBE_FILTER_CTRL_REG 0x1D4
+#define AMD_ACPI_SLIT_SOCKET_NUM_LENGTH 8
+
+//----------------------------------------------------------------------------
+// CDIT DEFINITIONS AND MACROS
+//
+//----------------------------------------------------------------------------
+#define AMD_ACPI_CDIT_NUM_DOMAINS_LENGTH 4 // Num domains is a 4-bytes unsigned integer
+
+
+//----------------------------------------------------------------------------
+// P-STATE DEFINITIONS AND MACROS
+//
+//----------------------------------------------------------------------------
+//-------------------------------------
+// ERROR Codes
+//-------------------------------------
+#define NO_ERROR 0x0
+#define USER_DISABLE_ERROR 0x01 // User disabled SSDT generation
+#define CORES_MISSMATCH_PSS_ERROR 0x02 // No PSS match
+#define PNOW_SUPPORT_ERROR 0x04 // One of the Cores do not support PNOW!
+#define PWR_FREQ_MATCH_ERROR 0x08 // FREQ and PWR mismatch
+#define NO_PSS_SIZE_ERROR 0x10 // Error in PSS Size
+#define INVALID_PSTATE_ERROR 0x20 // Invalid Max or only 1 P-State available
+#define NO_PSS_ENTRY 0x0FFFFul
+#define INVALID_FREQ 0x0FFFFFFFFul
+
+//-------------------------
+// Default definitions
+// AMD BKDG default values
+//-------------------------
+#define DEFAULT_ISOCH_RELIEF_TIME IRT_80uS
+#define DEFAULT_RAMP_VOLTAGE_OFFSET RVO_50mV
+#define DEFAULT_MAX_VOLTAGE_STEP MVS_25mV
+#define DEFAULT_PERF_PRESENT_CAP 0 // default for Desktop
+#define DEFAULT_VOLTAGE_STABLE_TIME (100 / 20) // 100uS
+#define DEFAULT_PLL_LOCK_TIME 2 // 2uS
+#define DEFAULT_TRANSITION_LATENCY 100 // 100uS
+#define DEFAULT_BUS_MASTER_LATENCY 9 // 9uS
+#define DEFAULT_CPU_SCOPE_NUMBER "0UPC"
+
+// Defines for Common ACPI
+// -----------------------------
+#define SCOPE_OPCODE 0x10
+#define NAME_OPCODE 0x08
+#define METHOD_OPCODE 0x14
+#define PACKAGE_OPCODE 0x12
+#define BUFFER_OPCODE 0x11
+#define BYTE_PREFIX_OPCODE 0x0A
+#define WORD_PREFIX_OPCODE 0x0B
+#define DWORD_PREFIX_OPCODE 0x0C
+#define RETURN_OPCODE 0xA4
+#define ACPI_BUFFER 0x080A0B11ul
+
+// Generic Register Descriptor (GDR) Fields
+#define GDR_ASI_SYSTEM_IO 0x01 // Address Space ID
+#define GDR_ASZ_BYTE_ACCESS 0x01 // Address Size
+
+// Defines for ACPI Scope Table
+// ----------------------------
+#define SCOPE_LENGTH (SCOPE_STRUCT_SIZE + \
+ PCT_STRUCT_SIZE + \
+ PSS_HEADER_STRUCT_SIZE + \
+ PSS_BODY_STRUCT_SIZE + \
+ PPC_HEADER_BODY_STRUCT_SIZE)
+#define SCOPE_VALUE1 0x5C
+#define SCOPE_VALUE2 0x2E
+#define SCOPE_NAME__ '_'
+#define SCOPE_NAME_P 'P'
+#define SCOPE_NAME_R 'R'
+#define SCOPE_NAME_S 'S'
+#define SCOPE_NAME_B 'B'
+#define SCOPE_NAME_C 'C'
+#define SCOPE_NAME_U 'U'
+#define SCOPE_NAME_0 '0'
+#define SCOPE_NAME_1 '1'
+#define SCOPE_NAME_2 '2'
+#define SCOPE_NAME_3 '3'
+#define SCOPE_NAME_A 'A'
+
+#ifdef OEM_SCOPE_NAME
+ #if (OEM_SCOPE_NAME > 'Z') || (OEM_SCOPE_NAME < 'A')
+ #error "OEM_SCOPE_NAME: it should be only one char long AND a valid letter (A~Z)"
+ #endif
+ #define SCOPE_NAME_VALUE OEM_SCOPE_NAME
+#else
+ #define SCOPE_NAME_VALUE SCOPE_NAME_C
+#endif // OEM_SCOPE_NAME
+
+#ifdef OEM_SCOPE_NAME1
+ #if (!(((OEM_SCOPE_NAME1 >= 'A') && (OEM_SCOPE_NAME1 <= 'Z')) || \
+ ((OEM_SCOPE_NAME1 >= '0') && (OEM_SCOPE_NAME1 <= '9')) || \
+ (OEM_SCOPE_NAME1 == '_')))
+ #error "OEM_SCOPE_NAME1: it should be only one char long AND a valid letter (0~9, A~F)"
+ #endif
+ #define SCOPE_NAME_VALUE1 OEM_SCOPE_NAME1
+#else
+ #define SCOPE_NAME_VALUE1 SCOPE_NAME_0
+#endif // OEM_SCOPE_NAME
+
+// Defines for PCT Control and Status Table
+// ----------------------------------------
+#define PCT_NAME__ '_'
+#define PCT_NAME_P 'P'
+#define PCT_NAME_C 'C'
+#define PCT_NAME_T 'T'
+#define PCT_VALUE1 0x11022C12ul
+#define PCT_VALUE2 0x0A14
+#define PCT_VALUE3 0x11
+#define GENERIC_REG_DESCRIPTION 0x82
+#define PCT_LENGTH 0x0C
+#define PCT_ADDRESS_SPACE_ID 0x7F
+#define PCT_REGISTER_BIT_WIDTH 0x40
+#define PCT_REGISTER_BIT_OFFSET 0x00
+#define PCT_RESERVED 0x00
+#define PCT_CONTROL_REG_LO 0xC0010062ul
+#define PCT_CONTROL_REG_HI 0x00
+#define PCT_VALUE4 0x14110079ul
+#define PCT_VALUE5 0x110A
+#define PCT_STATUS_REG_LO 0x00
+#define PCT_STATUS_REG_HI 0x00
+#define PCT_VALUE6 0x0079
+
+
+// Defines for PSS Header Table
+// ----------------------------
+#define PSS_NAME__ '_'
+#define PSS_NAME_X 'X'
+#define PSS_NAME_P 'P'
+#define PSS_NAME_S 'S'
+#define PSS_LENGTH (sizeof pssBodyStruct + 3)
+#define NUM_OF_ITEMS_IN_PSS 0x00
+
+
+// Defines for PSS Header Table
+// ----------------------------
+#define PSS_PKG_LENGTH 0x20 // PSS_BODY_STRUCT_SIZE - 1
+#define PSS_NUM_OF_ELEMENTS 0x06
+#define PSS_FREQUENCY 0x00
+#define PSS_POWER 0x00
+#define PSS_TRANSITION_LATENCY DEFAULT_TRANSITION_LATENCY
+#define PSS_BUS_MASTER_LATENCY DEFAULT_BUS_MASTER_LATENCY
+#define PSS_CONTROL ((DEFAULT_ISOCH_RELIEF_TIME << 30) + \
+ (DEFAULT_RAMP_VOLTAGE_OFFSET << 28) + \
+ (DEFAULT_EXT_TYPE << 27) + \
+ (DEFAULT_PLL_LOCK_TIME << 20) + \
+ (DEFAULT_MAX_VOLTAGE_STEP << 18) + \
+ (DEFAULT_VOLTAGE_STABLE_TIME << 11) + \
+ (PSS_VID << 6) + PSS_FID)
+#define PSS_STATUS (DEFAULT_EXTENDED_TYPE << 11) + (PSS_VID << 6) + (PSS_FID)
+
+// Defines for XPSS Header Table
+// ----------------------------
+#define XPSS_PKG_LENGTH 0x47 // XPSS_BODY_STRUCT_SIZE - 1
+#define XPSS_NUM_OF_ELEMENTS 0x08
+#define XPSS_ACPI_BUFFER 0x080A0B11ul
+
+
+// Defines for PPC Header Table
+// ----------------------------
+#define PPC_NAME__ '_'
+#define PPC_NAME_P 'P'
+#define PPC_NAME_C 'C'
+#define PPC_NAME_V 'V'
+#define PPC_METHOD_FLAGS 0x00;
+#define PPC_VALUE1 0x0A;
+
+// Defines for PSD Header Table
+// ----------------------------
+#define PSD_NAME__ '_'
+#define PSD_NAME_P 'P'
+#define PSD_NAME_S 'S'
+#define PSD_NAME_D 'D'
+#define PSD_HEADER_LENGTH (PSD_BODY_STRUCT_SIZE + 2)
+#define PSD_VALUE1 0x01
+
+
+// Defines for PSD Header Table
+// ----------------------------
+#define PSD_PKG_LENGTH (PSD_BODY_STRUCT_SIZE - 1)
+#define NUM_OF_ENTRIES 0x05
+#define PSD_NUM_OF_ENTRIES 0x05
+#define PSD_REVISION 0x00
+#define PSD_DEPENDENCY_DOMAIN 0x00
+#define PSD_COORDINATION_TYPE_HW_ALL 0xFE
+#define PSD_COORDINATION_TYPE_SW_ANY 0xFD
+#define PSD_COORDINATION_TYPE_SW_ALL 0xFC
+#define PSD_NUM_OF_PROCESSORS 0x01
+#define PSD_TWO_CORES_PER_COMPUTE_UNIT 0x02
+#define PSD_THREE_CORES_PER_COMPUTE_UNIT 0x03
+#define PSD_FOUR_CORES_PER_COMPUTE_UNIT 0x04
+
+
+#define CUSTOM_PSTATE_FLAG 0x55
+#define PSTATE_FLAG_1 0x55
+#define TARGET_PSTATE_FLAG 0xAA
+#define PSTATE_FLAG_2 0xAA
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+//----------------------------------------------------------------------------
+// ACPI P-States AML TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+
+//--------------------------------------------
+// AML code definition
+// (Scope)
+//---------------------------------------------
+/// SCOPE
+typedef struct _SCOPE {
+ UINT8 ScopeOpcode; ///< Opcode
+ UINT16 ScopeLength; ///< Scope Length
+ UINT8 ScopeValue1; ///< Value1
+ UINT8 ScopeValue2; ///< Value2
+ UINT8 ScopeNamePt1a__; ///< Name Pointer
+ UINT8 ScopeNamePt1a_P; ///< Name Pointer
+ UINT8 ScopeNamePt1a_R; ///< Name Pointer
+ UINT8 ScopeNamePt1b__; ///< Name Pointer
+ UINT8 ScopeNamePt2a_C; ///< Name Pointer
+ UINT8 ScopeNamePt2a_P; ///< Name Pointer
+ UINT8 ScopeNamePt2a_U; ///< Name Pointer
+ UINT8 ScopeNamePt2a_0; ///< Name Pointer
+} SCOPE;
+#define SCOPE_STRUCT_SIZE 13 // 13 Bytes
+
+//--------------------------------------------
+// AML code definition
+// (PCT Header and Body)
+//---------------------------------------------
+
+///Performance Control Header
+typedef struct _PCT_HEADER_BODY {
+ UINT8 NameOpcode; ///< Opcode
+ UINT8 PctName_a__; ///< String "_"
+ UINT8 PctName_a_P; ///< String "P"
+ UINT8 PctName_a_C; ///< String "C"
+ UINT8 PctName_a_T; ///< String "T"
+ UINT32 Value1; ///< Value1
+ UINT16 Value2; ///< Value2
+ UINT8 Value3; ///< Value3
+ UINT8 GenericRegDescription1; ///< Generic Reg Description
+ UINT16 Length1; ///< Length1
+ UINT8 AddressSpaceId1; ///< PCT Address Space ID
+ UINT8 RegisterBitWidth1; ///< PCT Register Bit Width
+ UINT8 RegisterBitOffset1; ///< PCT Register Bit Offset
+ UINT8 Reserved1; ///< Reserved
+ UINT32 ControlRegAddressLo; ///< Control Register Address Low
+ UINT32 ControlRegAddressHi; ///< Control Register Address High
+ UINT32 Value4; ///< Value4
+ UINT16 Value5; ///< Value 5
+ UINT8 GenericRegDescription2; ///< Generic Reg Description
+ UINT16 Length2; ///< Length2
+ UINT8 AddressSpaceId2; ///< PCT Address Space ID
+ UINT8 RegisterBitWidth2; ///< PCT Register Bit Width
+ UINT8 RegisterBitOffset2; ///< PCT Register Bit Offset
+ UINT8 Reserved2; ///< Reserved
+ UINT32 StatusRegAddressLo; ///< Control Register Address Low
+ UINT32 StatusRegAddressHi; ///< Control Register Address High
+ UINT16 Value6; ///< Values
+} PCT_HEADER_BODY;
+#define PCT_STRUCT_SIZE 50 // 50 Bytes
+
+
+//--------------------------------------------
+// AML code definition
+// (PSS Header)
+//--------------------------------------------
+///Performance Supported States Header
+typedef struct _PSS_HEADER {
+ UINT8 NameOpcode; ///< Opcode
+ UINT8 PssName_a__; ///< String "_"
+ UINT8 PssName_a_P; ///< String "P"
+ UINT8 PssName_a_S; ///< String "S"
+ UINT8 PssName_b_S; ///< String "S"
+ UINT8 PkgOpcode; ///< Package Opcode
+ UINT16 PssLength; ///< PSS Length
+ UINT8 NumOfItemsInPss; ///< Number of Items in PSS
+} PSS_HEADER;
+#define PSS_HEADER_STRUCT_SIZE 9 // 9 Bytes
+
+
+//--------------------------------------------
+// AML code definition
+// (PSS Body)
+//--------------------------------------------
+///Performance Supported States Body
+typedef struct _PSS_BODY {
+ UINT8 PkgOpcode; ///< Package Opcode
+ UINT8 PkgLength; ///< Package Length
+ UINT8 NumOfElements; ///< Number of Elements
+ UINT8 DwordPrefixOpcode1; ///< Prefix Opcode1
+ UINT32 Frequency; ///< Frequency
+ UINT8 DwordPrefixOpcode2; ///< Prefix Opcode2
+ UINT32 Power; ///< Power
+ UINT8 DwordPrefixOpcode3; ///< Prefix Opcode3
+ UINT32 TransitionLatency; ///< Transition Latency
+ UINT8 DwordPrefixOpcode4; ///< Prefix Opcode4
+ UINT32 BusMasterLatency; ///< Bus Master Latency
+ UINT8 DwordPrefixOpcode5; ///< Prefix Opcode5
+ UINT32 Control; ///< Control
+ UINT8 DwordPrefixOpcode6; ///< Prefix Opcode6
+ UINT32 Status; ///< Status
+} PSS_BODY;
+#define PSS_BODY_STRUCT_SIZE 33 // 33 Bytes
+
+
+/*--------------------------------------------
+ * AML code definition
+ * (XPSS Header)
+ *--------------------------------------------
+ */
+/// Extended PSS Header
+typedef struct _XPSS_HEADER {
+ UINT8 NameOpcode; ///< 08h
+ UINT8 XpssName_a_X; ///< String "X"
+ UINT8 XpssName_a_P; ///< String "P"
+ UINT8 XpssName_a_S; ///< String "S"
+ UINT8 XpssName_b_S; ///< String "S"
+ UINT8 PkgOpcode; ///< 12h
+ UINT16 XpssLength; ///< XPSS Length
+ UINT8 NumOfItemsInXpss; ///< Number of Items in XPSS
+} XPSS_HEADER;
+#define XPSS_HEADER_STRUCT_SIZE 9 // 9 Bytes
+
+/*--------------------------------------------
+ * AML code definition
+ * (XPSS Body)
+ *--------------------------------------------
+ */
+/// Extended PSS Body
+typedef struct _XPSS_BODY {
+ UINT8 PkgOpcode; ///< 12h
+ UINT8 PkgLength; ///< Package Length
+ UINT8 XpssValueTbd; ///< XPSS Value
+ UINT8 NumOfElements; ///< Number of Elements
+ UINT8 DwordPrefixOpcode1; ///< Prefix Opcode1
+ UINT32 Frequency; ///< Frequency
+ UINT8 DwordPrefixOpcode2; ///< Prefix Opcode2
+ UINT32 Power; ///< Power
+ UINT8 DwordPrefixOpcode3; ///< Prefix Opcode3
+ UINT32 TransitionLatency; ///< Transition Latency
+ UINT8 DwordPrefixOpcode4; ///< Prefix Opcode4
+ UINT32 BusMasterLatency; ///< Bus Master Latency
+ UINT32 ControlBuffer; ///< Control Buffer
+ UINT32 ControlLo; ///< Control Low
+ UINT32 ControlHi; ///< Control High
+ UINT32 StatusBuffer; ///< Status Buffer
+ UINT32 StatusLo; ///< Status Low
+ UINT32 StatusHi; ///< Status High
+ UINT32 ControlMaskBuffer; ///< Control Mask Buffer
+ UINT32 ControlMaskLo; ///< Control Mask Low
+ UINT32 ControlMaskHi; ///< Control Mask High
+ UINT32 StatusMaskBuffer; ///< Status Mask Buffer
+ UINT32 StatusMaskLo; ///< Status Mask Low
+ UINT32 StatusMaskHi; ///< Status Mask High
+} XPSS_BODY;
+#define XPSS_BODY_STRUCT_SIZE 72 // 72 Bytes
+
+/*--------------------------------------------
+ * AML code definition
+ * (PPC Header and Body)
+ *--------------------------------------------
+ */
+/// Performance Present Capabilities Header
+typedef struct _PPC_HEADER_BODY {
+ UINT8 NameOpcode; ///< Name Opcode
+ UINT8 PpcName_a_P; ///< String "P"
+ UINT8 PpcName_b_P; ///< String "P"
+ UINT8 PpcName_a_C; ///< String "C"
+ UINT8 PpcName_a_V; ///< String "V"
+ UINT8 Value1; ///< Value
+ UINT8 DefaultPerfPresentCap; ///< Default Perf Present Cap
+ UINT8 MethodOpcode; ///< Method Opcode
+ UINT8 PpcLength; ///< Method Length
+ UINT8 PpcName_a__; ///< String "_"
+ UINT8 PpcName_c_P; ///< String "P"
+ UINT8 PpcName_d_P; ///< String "P"
+ UINT8 PpcName_b_C; ///< String "C"
+ UINT8 MethodFlags; ///< Method Flags
+ UINT8 ReturnOpcode; ///< Return Opcoce
+ UINT8 PpcName_e_P; ///< String "P"
+ UINT8 PpcName_f_P; ///< String "P"
+ UINT8 PpcName_c_C; ///< String "C"
+ UINT8 PpcName_b_V; ///< String "V"
+
+} PPC_HEADER_BODY;
+#define PPC_HEADER_BODY_STRUCT_SIZE 19 // 19 Bytes
+#define PPC_METHOD_LENGTH 11 // 11 Bytes
+
+
+/*--------------------------------------------
+ * AML code definition
+ * (PSD Header)
+ *--------------------------------------------
+ */
+/// P-State Dependency Header
+typedef struct _PSD_HEADER {
+ UINT8 NameOpcode; ///< Name Opcode
+ UINT8 PsdName_a__; ///< String "_"
+ UINT8 PsdName_a_P; ///< String "P"
+ UINT8 PsdName_a_S; ///< String "S"
+ UINT8 PsdName_a_D; ///< String "D"
+ UINT8 PkgOpcode; ///< Package Opcode
+ UINT8 PsdLength; ///< PSD Length
+ UINT8 Value1; ///< Value
+} PSD_HEADER;
+#define PSD_HEADER_STRUCT_SIZE 8 // 8 Bytes
+
+/*--------------------------------------------
+ * AML code definition
+ * (PSD Body)
+ *--------------------------------------------
+ */
+/// P-State Dependency Body
+typedef struct _PSD_BODY {
+ UINT8 PkgOpcode; ///< Package Opcode
+ UINT8 PkgLength; ///< Package Length
+ UINT8 NumOfEntries; ///< Number of Entries
+ UINT8 BytePrefixOpcode1; ///< Prefix Opcode1 in Byte
+ UINT8 PsdNumOfEntries; ///< PSD Number of Entries
+ UINT8 BytePrefixOpcode2; ///< Prefix Opcode2 in Byte
+ UINT8 PsdRevision; ///< PSD Revision
+ UINT8 DwordPrefixOpcode1; ///< Prefix Opcode1 in DWord
+ UINT32 DependencyDomain; ///< Dependency Domain
+ UINT8 DwordPrefixOpcode2; ///< Prefix Opcode2 in DWord
+ UINT32 CoordinationType; ///< (0xFC = SW_ALL, 0xFD = SW_ANY, 0xFE = HW_ALL)
+ UINT8 DwordPrefixOpcode3; ///< Prefix Opcode3 in DWord
+ UINT32 NumOfProcessors; ///< Number of Processors
+} PSD_BODY;
+#define PSD_BODY_STRUCT_SIZE 22 // 22 Bytes
+
+//----------------------------------------------------------------------------
+// WHEA TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+
+/// HEST MCE TABLE
+typedef struct _AMD_HEST_MCE_TABLE {
+ UINT16 TblLength; ///< Length, in bytes, of entire AMD_HEST_MCE structure.
+ UINT32 GlobCapInitDataLSD; ///< Holds the value that the OS will program into
+ UINT32 GlobCapInitDataMSD; ///< the machine check global capability register(MCG_CAP).
+ UINT32 GlobCtrlInitDataLSD; ///< Holds the value that the OS will program into
+ UINT32 GlobCtrlInitDataMSD; ///< the machine check global control register(MCG_CTL).
+ UINT8 NumHWBanks; ///< The number of hardware error reporting banks.
+ UINT8 Rsvd[7]; ///< reserve 7 bytes as spec's required
+} AMD_HEST_MCE_TABLE;
+
+/// HEST CMC TABLE
+typedef struct _AMD_HEST_CMC_TABLE {
+ UINT16 TblLength; ///< Length, in bytes, of entire AMD_HEST_CMC structure.
+ UINT8 NumHWBanks; ///< The number of hardware error reporting banks.
+ UINT8 Rsvd[3]; ///< reserve 3 bytes as spec's required
+} AMD_HEST_CMC_TABLE;
+
+/// HEST BANK
+typedef struct _AMD_HEST_BANK {
+ UINT8 BankNum; ///< Zero-based index identifies the machine check error bank.
+ UINT8 ClrStatusOnInit; ///< Indicates if the status information in this machine check bank
+ ///< is to be cleared during system initialization.
+ UINT8 StatusDataFormat; ///< Indicates the format of the data in the status register
+ UINT8 ConfWriteEn; ///< This field indicates whether configuration parameters may be
+ ///< modified by the OS. If the bit for the associated parameter is
+ ///< set, the parameter is writable by the OS.
+ UINT32 CtrlRegMSRAddr; ///< Address of the hardware bank's control MSR. Ignored if zero.
+
+ UINT32 CtrlInitDataLSD; ///< This is the value the OS will program into the machine check
+ UINT32 CtrlInitDataMSD; ///< bank's control register
+ UINT32 StatRegMSRAddr; ///< Address of the hardware bank's MCi_STAT MSR. Ignored if zero.
+ UINT32 AddrRegMSRAddr; ///< Address of the hardware bank's MCi_ADDR MSR. Ignored if zero.
+ UINT32 MiscRegMSRAddr; ///< Address of the hardware bank's MCi_MISC MSR. Ignored if zero.
+} AMD_HEST_BANK;
+
+/// Initial data of AMD_HEST_BANK
+typedef struct _AMD_HEST_BANK_INIT_DATA {
+ UINT32 CtrlInitDataLSD; ///< Initial data of CtrlInitDataLSD
+ UINT32 CtrlInitDataMSD; ///< Initial data of CtrlInitDataMSD
+ UINT32 CtrlRegMSRAddr; ///< Initial data of CtrlRegMSRAddr
+ UINT32 StatRegMSRAddr; ///< Initial data of StatRegMSRAddr
+ UINT32 AddrRegMSRAddr; ///< Initial data of AddrRegMSRAddr
+ UINT32 MiscRegMSRAddr; ///< Initial data of MiscRegMSRAddr
+} AMD_HEST_BANK_INIT_DATA;
+
+/// MSR179 Global Machine Check Capabilities data struct
+typedef struct _MSR_MCG_CAP_STRUCT {
+ UINT64 Count:8; ///< Indicates the number of
+ ///< error-reporting banks visible to each core
+ UINT64 McgCtlP:1; ///< 1=The machine check control registers
+ UINT64 Rsvd:55; ///< reserved
+} MSR_MCG_CAP_STRUCT;
+
+/// Initial data of WHEA
+typedef struct _AMD_WHEA_INIT_DATA {
+ UINT32 GlobCapInitDataLSD; ///< Holds the value that the OS will program into the machine
+ UINT32 GlobCapInitDataMSD; ///< Check global capability register
+ UINT32 GlobCtrlInitDataLSD; ///< Holds the value that the OS will grogram into the machine
+ UINT32 GlobCtrlInitDataMSD; ///< Check global control register
+ UINT8 ClrStatusOnInit; ///< Indicates if the status information in this machine check
+ ///< bank is to be cleared during system initialization
+ UINT8 StatusDataFormat; ///< Indicates the format of the data in the status register
+ UINT8 ConfWriteEn; ///< This field indicates whether configuration parameters may be
+ ///< modified by the OS. If the bit for the associated parameter is
+ ///< set, the parameter is writable by the OS.
+ UINT8 HestBankNum; ///< Number of HEST Bank
+ AMD_HEST_BANK_INIT_DATA *HestBankInitData; ///< Pointer to Initial data of HEST Bank
+} AMD_WHEA_INIT_DATA;
+
+//----------------------------------------------------------------------------
+// DMI TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// DMI brand information
+typedef struct {
+ UINT16 String1:4; ///< String1
+ UINT16 String2:4; ///< String2
+ UINT16 Model:7; ///< Model
+ UINT16 Pg:1; ///< Page
+} BRAND_ID;
+
+/// DMI cache information
+typedef struct {
+ UINT32 L1CacheSize; ///< L1 cache size
+ UINT8 L1CacheAssoc; ///< L1 cache associativity
+ UINT32 L2CacheSize; ///< L2 cache size
+ UINT8 L2CacheAssoc; ///< L2 cache associativity
+ UINT32 L3CacheSize; ///< L3 cache size
+ UINT8 L3CacheAssoc; ///< L3 cache associativity
+} CPU_CACHE_INFO;
+
+/// DMI processor information
+typedef struct {
+ UINT8 ExtendedFamily; ///< Extended Family
+ UINT8 ExtendedModel; ///< Extended Model
+ UINT8 BaseFamily; ///< Base Family
+ UINT8 BaseModel; ///< Base Model
+ UINT8 Stepping; ///< Stepping
+ UINT8 PackageType; ///< PackageType
+ BRAND_ID BrandId; ///< BrandId which contains information about String1, String2, Model and Page
+ UINT8 TotalCoreNumber; ///< Number of total cores
+ UINT8 EnabledCoreNumber; ///< Number of enabled cores
+ UINT8 ProcUpgrade; ///< ProcUpdrade
+ CPU_CACHE_INFO CacheInfo; ///< CPU cache info
+} CPU_TYPE_INFO;
+
+/// A structure containing processor name string and
+/// the value that should be provide to DMI type 4 processor family
+typedef struct {
+ IN CONST CHAR8 *Stringstart; ///< The literal string
+ IN UINT8 T4ProcFamilySetting; ///< The value set to DMI type 4 processor family
+} CPU_T4_PROC_FAMILY;
+
+/// DMI ECC information
+typedef struct {
+ BOOLEAN EccCapable; ///< ECC Capable
+} CPU_GET_MEM_INFO;
+
+/* Transfer vectors for DMI family specific routines */
+typedef VOID OPTION_DMI_GET_CPU_INFO (
+ IN OUT CPU_TYPE_INFO *CpuInfoPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef VOID OPTION_DMI_GET_PROC_FAMILY (
+ IN OUT UINT8 *T4ProcFamily,
+ IN PROC_FAMILY_TABLE *CpuDmiProcFamilyTable,
+ IN CPU_TYPE_INFO *CpuInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef UINT8 OPTION_DMI_GET_VOLTAGE (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef UINT16 OPTION_DMI_GET_MAX_SPEED (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef UINT16 OPTION_DMI_GET_EXT_CLOCK (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef VOID OPTION_DMI_GET_MEM_INFO (
+ IN OUT CPU_GET_MEM_INFO *CpuGetMemInfoPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Brand table entry format
+typedef struct {
+ UINT8 PackageType; ///< Package type
+ UINT8 PgOfBrandId; ///< Page
+ UINT8 NumberOfCores; ///< Number of cores
+ UINT8 String1ofBrandId; ///< String1
+ UINT8 ValueSetToDmiTable; ///< The value which will should be set to DMI table
+} DMI_BRAND_ENTRY;
+
+/// Family specific data table structure
+struct _PROC_FAMILY_TABLE {
+ UINT64 ProcessorFamily; ///< processor
+ OPTION_DMI_GET_CPU_INFO *DmiGetCpuInfo; ///< transfer vectors
+ OPTION_DMI_GET_PROC_FAMILY *DmiGetT4ProcFamily; ///< Get DMI type 4 processor family information
+ OPTION_DMI_GET_VOLTAGE *DmiGetVoltage; ///< vector for reading voltage
+ OPTION_DMI_GET_MAX_SPEED *DmiGetMaxSpeed; ///< vector for reading speed
+ OPTION_DMI_GET_EXT_CLOCK *DmiGetExtClock; ///< vector for reading external clock speed
+ OPTION_DMI_GET_MEM_INFO *DmiGetMemInfo; ///< Get memory information
+ UINT8 LenBrandList; ///< size of brand table
+ CONST DMI_BRAND_ENTRY *DmiBrandList; ///< translate brand info to DMI identifier
+};
+
+//----------------------------------------------------------------------------
+// SLIT TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// Format for SRAT Header
+typedef struct {
+ UINT8 Sign[4]; ///< Signature
+ UINT32 TableLength; ///< Table Length
+ UINT8 Revision; ///< Revision
+ UINT8 Checksum; ///< Checksum
+ UINT8 OemId[6]; ///< OEM ID
+ UINT8 OemTableId[8]; ///< OEM Tabled ID
+ UINT32 OemRev; ///< OEM Revision
+ UINT8 CreatorId[4]; ///< Creator ID
+ UINT32 CreatorRev; ///< Creator Revision
+} ACPI_TABLE_HEADER;
+
+//----------------------------------------------------------------------------
+// SRAT TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// Format for SRAT Header
+typedef struct _CPU_SRAT_HEADER {
+ UINT8 Sign[4]; ///< Signature
+ UINT32 TableLength; ///< Table Length
+ UINT8 Revision; ///< Revision
+ UINT8 Checksum; ///< Checksum
+ UINT8 OemId[6]; ///< OEM ID
+ UINT8 OemTableId[8]; ///< OEM Tabled ID
+ UINT32 OemRev; ///< OEM Revision
+ UINT8 CreatorId[4]; ///< Creator ID
+ UINT32 CreatorRev; ///< Creator Revision
+ UINT32 TableRev; ///< Table Revision
+ UINT8 Reserved[8]; ///< Reserved
+} CPU_SRAT_HEADER;
+
+
+/// Format for SRAT APIC Affinity Entry
+typedef struct _CPU_SRAT_APIC_ENTRY {
+ UINT8 Type; ///< Type
+ UINT8 Length; ///< Length
+ UINT8 Domain; ///< Domain
+ UINT8 ApicId; ///< Apic ID
+ UINT32 Flags; ///< Flags
+ UINT8 LSApicEid; ///< Local SAPIC EID
+ UINT8 Reserved[7]; ///< Reserved
+} CPU_SRAT_APIC_ENTRY;
+
+
+/// Format for SRAT Memory Affinity Entry
+typedef struct _CPU_SRAT_MEMORY_ENTRY {
+ UINT8 Type; ///< 0: Memory affinity = 1
+ UINT8 Length; ///< 1: Length = 40 bytes
+ UINT32 Domain; ///< 2: Proximity domain
+ UINT8 Reserved1[2]; ///< 6: Reserved
+ UINT32 BaseAddrLow; ///< 8: Low 32bits address base
+ UINT32 BaseAddrHigh; ///< 12: High 32bits address base
+ UINT32 LengthAddrLow; ///< 16: Low 32bits address limit
+ UINT32 LengthAddrHigh; ///< 20: High 32bits address limit
+ UINT8 Reserved2[4]; ///< 24: Memory Type
+ UINT32 Flags; ///< 28: Flags
+ UINT8 Reserved3[8]; ///< 32: Reserved
+} CPU_SRAT_MEMORY_ENTRY;
+
+//----------------------------------------------------------------------------
+// CRAT TYPEDEFS, STRUCTURES, ENUMS
+// Component Resource Affinity Table
+//----------------------------------------------------------------------------
+/// Format for CRAT Header
+typedef struct {
+ UINT8 Sign[4]; ///< CRAT, Signature for the Component Resource Affinity Table.
+ UINT32 Length; ///< Length, in bytes, of the entire CRAT
+ UINT8 Revision; ///< 0
+ UINT8 Checksum; ///< Entire table must sum to zero.
+ UINT8 OemId[6]; ///< OEM ID
+ UINT8 OemTableId[8]; ///< OEM Tabled ID
+ UINT32 OemRev; ///< OEM Revision
+ UINT8 CreatorId[4]; ///< Creator ID
+ UINT32 CreatorRev; ///< Creator Revision
+ UINT32 TotalEntries; ///< total number[n] of entries in the CRAT
+ UINT16 NumDomains; ///< Number of HSA proximity domains
+ UINT8 Reserved[6]; ///< Reserved
+} CRAT_HEADER;
+
+/// Flags field of the CRAT HSA Processing Unit Affinity Structure
+typedef struct {
+ UINT32 Enabled:1; ///< Enabled
+ UINT32 HotPluggable:1; ///< Hot Pluggable
+ UINT32 CpuPresent:1; ///< Cpu Present
+ UINT32 GpuPresent:1; ///< Gpu Present
+ UINT32 IommuPresent:1; ///< IOMMU Present
+ UINT32 :27; ///< Reserved
+} CRAT_HSA_PROCESSING_UNIT_FLAG;
+
+/// CRAT HSA Processing Unit Affinity Structure
+typedef struct {
+ UINT8 Type; ///< 0 - CRAT HSA Processing Unit Structure
+ UINT8 Length; ///< 40
+ UINT16 Reserved; ///< Reserved
+ CRAT_HSA_PROCESSING_UNIT_FLAG Flags; ///< Flags - HSA Processing Unit Affinity Structure
+ UINT32 ProximityDomain; ///< Integer that represents the proximity domain to which the node belongs to
+ UINT32 ProcessorIdLow; ///< Low value of the logical processor included in this HSA proximity domain
+ UINT16 NumCPUCores; ///< Indicates count of CCompute execution units present in this APU node.
+ UINT16 NumSIMDCores; ///< Indicates maximum count of HCompute SIMD cores present in this node.
+ UINT16 MaxWavesSIMD; ///< This identifies the max. number of launched waves per SIMD.
+ UINT16 IoCount; ///< Number of discoverable IO Interfaces connecting this node to other components.
+ UINT16 HSACapability; ///< Must be 0
+ UINT16 LDSSizeInKB; ///< Size of LDS memory per SIMD Wavefront
+ UINT8 WaveFrontSize; ///< 64, may be 32 for some FSA based architectures
+ UINT8 NumBanks; ///< Number of Banks or "Shader Engines", typically 1 or 2
+ UINT16 uEngineIdentifier; ///< Identifier (Rev) of the GPU uEngine or firmware
+ UINT8 NumArrays; ///< Number of SIMD Arrays per Engine
+ UINT8 NumCUPerArray; ///< Number of Compute Units (CU) per SIMD Array
+ UINT8 NumSIMDPerCU; ///< Number of SIMD representing a Compute Unit
+ UINT8 MaxSlotsScratchCU; ///< Max. Number of temp. memory ("scratch") wave slots
+ ///< available to access, may be 0 if HW has no restrictions
+ UINT8 Reserved1[4]; ///< Reserved
+} CRAT_HSA_PROCESSING_UNIT;
+
+/// Flags field of the CRAT Memory Affinity Structure
+typedef struct {
+ UINT32 Enabled:1; ///< Enabled
+ UINT32 HotPluggable:1; ///< Hot Pluggable
+ UINT32 NonVolatile:1; ///< If set, the memory region represents Non-Volatile memory
+ UINT32 :29; ///< Reserved
+} CRAT_MEMORY_FLAG;
+
+/// CRAT Memory Affinity Structure
+typedef struct {
+ UINT8 Type; ///< 1 - CRAT Memory Affinity Structure
+ UINT8 Length; ///< 40
+ UINT16 Reserved; ///< Reserved
+ CRAT_MEMORY_FLAG Flags; ///< Flags - Memory Affinity Structure. Indicates whether the region of memory is enabled and can be hot plugged
+ UINT32 ProximityDomain; ///< Integer that represents the proximity domain to which the node belongs to
+ UINT32 BaseAddressLow; ///< Low 32Bits of the Base Address of the memory range
+ UINT32 BaseAddressHigh; ///< High 32Bits of the Base Address of the memory range
+ UINT32 LengthLow; ///< Low 32Bits of the length of the memory range
+ UINT32 LengthHigh; ///< High 32Bits of the length of the memory range
+ UINT32 Width; ///< Memory width - Specifies the number of parallel bits of the memory interface
+ UINT8 Reserved1[8]; ///< Reserved
+} CRAT_MEMORY;
+
+/// Flags field of the CRAT Cache Affinity structure
+typedef struct {
+ UINT32 Enabled:1; ///< Enabled
+ UINT32 DataCache:1; ///< 1 if cache includes data
+ UINT32 InstructionCache:1; ///< 1 if cache includes instructions
+ UINT32 CpuCache:1; ///< 1 if cache is part of CPU functionality
+ UINT32 SimdCache:1; ///< 1 if cache is part of SIMD functionality
+ UINT32 :27; ///< Reserved
+} CRAT_CACHE_FLAG;
+
+/// CRAT Cache Affinity Structure
+typedef struct {
+ UINT8 Type; ///< 2 - CRAT Cache Affinity Structure
+ UINT8 Length; ///< 64
+ UINT16 Reserved; ///< Reserved
+ CRAT_CACHE_FLAG Flags; ///< Flags - Cache Affinity Structure. Indicates whether the region of cache is enabled
+ UINT32 ProcessorIdLow; ///< Low value of a logical processor which includes this component
+ UINT8 SiblingMap[32]; ///< Bitmask of Processor Id sharing this component. 1 bit per logical processor
+ UINT32 CacheSize; ///< Cache size in KB
+ UINT8 CacheLevel; ///< Integer representing level: 1, 2, 3, 4, etc.
+ UINT8 LinesPerTag; ///< Cache Lines per tag
+ UINT16 CacheLineSize; ///< Cache line size in bytes
+ UINT8 Associativity; ///< Cache associativity
+ ///< The associativity fields are encoded as follows:
+ ///< 00h: Reserved.
+ ///< 01h: Direct mapped.
+ ///< 02h-FEh: Associativity. (e.g., 04h = 4-way associative.)
+ ///< FFh: Fully associative
+ UINT8 CacheProperties; ///< Cache Properties bits [2:0] represent Inclusive/Exclusive property encoded.
+ ///< 0: Cache is strictly exclusive to lower level caches.
+ ///< 1: Cache is mostly exclusive to lower level caches.
+ ///< 2: Cache is strictly inclusive to lower level caches.
+ ///< 3: Cache is mostly inclusive to lower level caches.
+ ///< 4: Cache is a "constant cache" (= explicit update)
+ ///< 5: Cache is a "specialty cache" (e.g. Texture cache)
+ ///< 6-7: Reserved
+ ///< CacheProperties bits [7:3] are reserved
+ UINT16 CacheLatency; ///< Cost of time to access cache described in nanoseconds.
+ UINT8 Reserved1[8]; ///< Reserved
+} CRAT_CACHE;
+
+/// Flags field of the CRAT TLB Affinity structure
+typedef struct {
+ UINT32 Enabled:1; ///< Enabled
+ UINT32 DataTLB:1; ///< 1 if TLB includes translation information for data.
+ UINT32 InstructionTLB:1; ///< 1 if TLB includes translation information for instructions.
+ UINT32 CpuTLB:1; ///< 1 if TLB is part of CPU functionality
+ UINT32 SimdTLB:1; ///< 1 if TLB is part of SIMD functionality
+ UINT32 :27; ///< Reserved
+} CRAT_TLB_FLAG;
+
+/// CRAT TLB Affinity Structure
+typedef struct {
+ UINT8 Type; ///< 3 - CRAT TLB Affinity Structure
+ UINT8 Length; ///< 64
+ UINT16 Reserved; ///< Reserved
+ CRAT_TLB_FLAG Flags; ///< Flags - TLB Affinity Structure. Indicates whether the TLB is enabled and defined
+ UINT32 ProcessorIdLow; ///< Low value of a logical processor which includes this component.
+ UINT8 SiblingMap[32]; ///< Bitmask of Processor Id sharing this component. 1 bit per logical processor
+ UINT32 TLBLevel; ///< Integer representing level: 1, 2, 3, 4, etc.
+ UINT8 DataTLBAssociativity2MB; ///< Data TLB associativity for 2MB pages
+ ///< The associativity fields are encoded as follows:
+ ///< 00h: Reserved.
+ ///< 01h: Direct mapped.
+ ///< 02h-FEh: Associativity. (e.g., 04h = 4-way associative.)
+ ///< FFh: Fully associative.
+ UINT8 DataTLBSize2MB; ///< Data TLB number of entries for 2MB.
+ UINT8 InstructionTLBAssoc2MB; ///< Instruction TLB associativity for 2MB pages
+ ///< The associativity fields are encoded as follows:
+ ///< 00h: Reserved.
+ ///< 01h: Direct mapped.
+ ///< 02h-FEh: Associativity. (e.g., 04h = 4-way associative.)
+ ///< FFh: Fully associative.
+ UINT8 InstructionTLBSize2MB; ///< Instruction TLB number of entries for 2MB pages.
+ UINT8 DTLB4KAssoc; ///< Data TLB Associativity for 4KB pages
+ UINT8 DTLB4KSize; ///< Data TLB number of entries for 4KB pages
+ UINT8 ITLB4KAssoc; ///< Instruction TLB Associativity for 4KB pages
+ UINT8 ITLB4KSize; ///< Instruction TLB number of entries for 4KB pages
+ UINT8 DTLB1GAssoc; ///< Data TLB Associativity for 1GB pages
+ UINT8 DTLB1GSize; ///< Data TLB number of entries for 1GB pages
+ UINT8 ITLB1GAssoc; ///< Instruction TLB Associativity for 1GB pages
+ UINT8 ITLB1GSize; ///< Instruction TLB number of entries for 1GB pages
+ UINT8 Reserved1[4]; ///< Reserved
+} CRAT_TLB;
+
+/// Flags field of the CRAT FPU Affinity structure
+typedef struct {
+ UINT32 Enabled:1; ///< Enabled
+ UINT32 :31; ///< Reserved
+} CRAT_FPU_FLAG;
+
+/// CRAT FPU Affinity Structure
+typedef struct {
+ UINT8 Type; ///< 4 - CRAT FPU Affinity Structure
+ UINT8 Length; ///< 64
+ UINT16 Reserved; ///< Reserved
+ CRAT_FPU_FLAG Flags; ///< Flags - FPU Affinity Structure. Indicates whether the region of FPU affinity structure is enabled and defined
+ UINT32 ProcessorIdLow; ///< Low value of a logical processor which includes this component.
+ UINT8 SiblingMap[32]; ///< Bitmask of Processor Id sharing this component. 1 bit per logical processor
+ UINT32 FPUSize; ///< Product specific
+ UINT8 Reserved1[16]; ///< Reserved
+} CRAT_FPU;
+
+/// Flags field of the CRAT IO Affinity structure
+typedef struct {
+ UINT32 Enabled:1; ///< Enabled
+ UINT32 Coherency:1; ///< If set, IO interface supports coherent transactions (natively or through protocol extensions)
+ UINT32 :30; ///< Reserved
+} CRAT_IO_FLAG;
+
+/// CRAT IO Affinity Structure
+typedef struct {
+ UINT8 Type; ///< 5 - CRAT IO Affinity Structure
+ UINT8 Length; ///< 64
+ UINT16 Reserved; ///< Reserved
+ CRAT_IO_FLAG Flags; ///< Flags - IO Affinity Structure. Indicates whether the region of IO affinity structure is enabled and defined.
+ UINT32 ProximityDomainFrom; ///< Integer that represents the proximity domain to which the IO Interface belongs to
+ UINT32 ProximityDomainTo; ///< Integer that represents the other proximity domain to which the IO Interface belongs to
+ UINT8 IoType; ///< IO Interface type. Values defined are
+ ///< 0: Undefined
+ ///< 1: Hypertransport
+ ///< 2: PCI Express
+ ///< 3: Other (e.g. internal)
+ ///< 4-255: Reserved
+ UINT8 VersionMajor; ///< Major version of the Bus interface
+ UINT16 VersionMinor; ///< Minor version of the Bus interface ((optional)
+ UINT32 MinimumLatency; ///< Cost of time to transfer, described in nanoseconds.
+ UINT32 MaximumLatency; ///< Cost of time to transfer, described in nanoseconds.
+ UINT32 MinimumBandwidth; ///< Minimum interface Bandwidth in MB/s
+ UINT32 MaximumBandwidth; ///< Maximum interface Bandwidth in MB/s
+ UINT32 RecommendedTransferSize; ///< Recommended transfer size to reach maximum interface bandwidth in Bytes
+ UINT8 Reserved1[24]; ///< Reserved
+} CRAT_IO;
+
+#define CRAT_MAX_LENGTH 0x400ul ///< Reserve 1K for CRAT
+/// CRAT entry type
+typedef enum {
+ CRAT_TYPE_HSA_PROC_UNIT = 0, ///< 0 - CRAT HSA Processing Unit Structure
+ CRAT_TYPE_MEMORY, ///< 1 - CRAT Memory Affinity Structure
+ CRAT_TYPE_CACHE, ///< 2 - CRAT Cache Affinity Structure
+ CRAT_TYPE_TLB, ///< 3 - CRAT TLB Affinity Structure
+ CRAT_TYPE_FPU, ///< 4 - CRAT FPU Affinity Structure
+ CRAT_TYPE_IO, ///< 5 - CRAT IO Affinity Structure
+} CRAT_ENTRY_TYPE;
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+AmdCpuLate (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig
+ );
+
+AGESA_STATUS
+CreateAcpiWhea (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **WheaMcePtr,
+ IN OUT VOID **WheaCmcPtr
+ );
+
+AGESA_STATUS
+CreateDmiRecords (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT DMI_INFO **DmiTable
+ );
+
+AGESA_STATUS
+GetType4Type7Info (
+ IN AP_EXE_PARAMS *ApExeParams
+ );
+
+VOID
+DmiGetT4ProcFamilyFromBrandId (
+ IN OUT UINT8 *T4ProcFamily,
+ IN PROC_FAMILY_TABLE *CpuDmiProcFamilyTable,
+ IN CPU_TYPE_INFO *CpuInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GetNameString (
+ IN OUT CHAR8 *String,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+IsSourceStrContainTargetStr (
+ IN OUT CHAR8 *SourceStr,
+ IN OUT CONST CHAR8 *TargetStr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+CreateAcpiCrat (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ OUT VOID **CratPtr
+ );
+
+AGESA_STATUS
+CreateAcpiCdit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT VOID **CditPtr
+ );
+
+AGESA_STATUS
+CreateAcpiSrat (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT VOID **SratPtr
+ );
+
+AGESA_STATUS
+CreateAcpiSlit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT VOID **SlitPtr
+ );
+
+VOID
+ChecksumAcpiTable (
+ IN OUT ACPI_TABLE_HEADER *Table,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+RunLateApTaskOnAllAPs (
+ IN AP_EXE_PARAMS *ApParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+RunLateApTaskOnAllCore0s (
+ IN AP_EXE_PARAMS *ApParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _CPU_LATE_INIT_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuMicrocodePatch.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuMicrocodePatch.c
new file mode 100644
index 0000000..b3db886
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuMicrocodePatch.c
@@ -0,0 +1,431 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Microcode Patch Related Functions
+ *
+ * Contains code to program a microcode into the CPU
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*---------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *---------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuEarlyInit.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_CPUMICROCODEPATCH_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+typedef union {
+ UINT64 RawData;
+ PATCH_LOADER_MSR BitFields;
+} PATCH_LOADER;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+LoadMicrocode (
+ IN MICROCODE_PATCH *MicrocodePatchPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+LoadMicrocodePatchAtEarly (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * Update microcode patch in current processor.
+ *
+ * Then reads the patch id, and compare it to the expected, in the Microprocessor
+ * patch block.
+ *
+ * @param[in] StdHeader - Config handle for library and services.
+ *
+ * @retval TRUE - Patch Loaded Successfully.
+ * @retval FALSE - Patch Did Not Get Loaded.
+ *
+ */
+BOOLEAN
+LoadMicrocodePatch (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 PatchNumber;
+ UINT8 TotalPatches;
+ UINT16 ProcessorEquivalentId;
+ BOOLEAN Status;
+ MICROCODE_PATCH **MicrocodePatchPtr;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ MICROCODE_PATCH *ForceLoadMicrocodePatchPtr;
+ Status = FALSE;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+ if ((!(FamilySpecificServices->PatchLoaderIsSharedByCU)) || (IsCoreComputeUnitPrimary (FirstCoreIsComputeUnitPrimary, StdHeader))) {
+ // Get the patch pointer
+ FamilySpecificServices->GetMicroCodePatchesStruct (FamilySpecificServices, (CONST VOID **) &MicrocodePatchPtr, &TotalPatches, StdHeader);
+ ForceLoadMicrocodePatchPtr = NULL;
+ IDS_SKIP_HOOK (IDS_UCODE, &ForceLoadMicrocodePatchPtr, StdHeader) {
+ if (ForceLoadMicrocodePatchPtr == NULL) {
+ // Get the processor microcode path equivalent ID
+ if (GetPatchEquivalentId (&ProcessorEquivalentId, StdHeader)) {
+ // parse the patch table to see if we have one for the current cpu
+ for (PatchNumber = 0; PatchNumber < TotalPatches; PatchNumber++) {
+ if (ValidateMicrocode (MicrocodePatchPtr[PatchNumber], ProcessorEquivalentId, StdHeader)) {
+ if (LoadMicrocode (MicrocodePatchPtr[PatchNumber], StdHeader)) {
+ Status = TRUE;
+ } else {
+ PutEventLog (AGESA_ERROR,
+ CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED,
+ 0, 0, 0, 0, StdHeader);
+ }
+ break; // Once we find a microcode patch that matches the processor, exit the for loop
+ }
+ }
+ }
+ } else {
+ IDS_HDT_CONSOLE (CPU_TRACE, " Force Ucode loaded from offset %x\n", ForceLoadMicrocodePatchPtr);
+ if (LoadMicrocode (ForceLoadMicrocodePatchPtr, StdHeader)) {
+ Status = TRUE;
+ } else {
+ PutEventLog (AGESA_ERROR,
+ CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED,
+ 0, 0, 0, 0, StdHeader);
+ }
+ }
+ }
+ }
+ return Status;
+}
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * LoadMicrocode
+ *
+ * Update microcode patch in current processor, then reads the
+ * patch id, and compare it to the expected, in the Microprocessor
+ * patch block.
+ *
+ * @param[in] MicrocodePatchPtr - Pointer to Microcode Patch.
+ * @param[in,out] StdHeader - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ * @retval TRUE - Patch Loaded Successfully.
+ * @retval FALSE - Patch Did Not Get Loaded.
+ *
+ */
+BOOLEAN
+STATIC
+LoadMicrocode (
+ IN MICROCODE_PATCH *MicrocodePatchPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 MicrocodeVersion;
+ PATCH_LOADER PatchLoaderMsr;
+
+ // Load microcode patch into CPU
+ PatchLoaderMsr.RawData = (UINT64) (UINTN) MicrocodePatchPtr;
+ PatchLoaderMsr.BitFields.SBZ = 0;
+ LibAmdMsrWrite (0xC0010020ul, &PatchLoaderMsr.RawData, StdHeader);
+
+ // Do ucode patch Authentication
+ // Read microcode version back from CPU, determine if
+ // it is the same patch level as contained in the source
+ // microprocessor patch block passed in
+ GetMicrocodeVersion (&MicrocodeVersion, StdHeader);
+ if (MicrocodeVersion == MicrocodePatchPtr->PatchID) {
+ return (TRUE);
+ } else {
+ return (FALSE);
+ }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * GetPatchEquivalentId
+ *
+ * Return the equivalent ID for microcode patching
+ *
+ * @param[in,out] ProcessorEquivalentId - Pointer to Processor Equivalent ID table.
+ * @param[in,out] StdHeader - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ * @retval TRUE - ID Found.
+ * @retval FALSE - ID Not Found.
+ *
+ */
+BOOLEAN
+GetPatchEquivalentId (
+ IN OUT UINT16 *ProcessorEquivalentId,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+ UINT8 EquivalencyEntries;
+ UINT16 ProcessorRevisionId;
+ UINT16 *MicrocodeEquivalenceTable;
+ CPUID_DATA CpuIdData;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ //
+ // compute the processor revision ID
+ //
+ LibAmdCpuidRead (AMD_CPUID_FMF, &CpuIdData, StdHeader);
+ // high byte contains extended model and extended family
+ ProcessorRevisionId = (UINT16) ((CpuIdData.EAX_Reg & (CPU_EMODEL | CPU_EFAMILY)) >> 8);
+ // low byte contains model and family
+ ProcessorRevisionId |= (CpuIdData.EAX_Reg & (CPU_STEPPING | CPU_MODEL));
+
+ //
+ // find the equivalent ID for microcode purpose using the equivalence table
+ //
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+
+ FamilySpecificServices->GetMicrocodeEquivalenceTable (FamilySpecificServices,
+ (CONST VOID **) &MicrocodeEquivalenceTable,
+ &EquivalencyEntries,
+ StdHeader);
+
+ // parse the equivalence table
+ for (i = 0; i < (EquivalencyEntries * 2); i += 2) {
+ // check for equivalence
+ if (ProcessorRevisionId == MicrocodeEquivalenceTable[i]) {
+ *ProcessorEquivalentId = MicrocodeEquivalenceTable[i + 1];
+ return (TRUE);
+ }
+ }
+ // end of table reach, this processor is not supported
+ *ProcessorEquivalentId = 0x0000;
+ return (FALSE);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * ValidateMicrocode
+ *
+ * Determine if the microcode patch block, currently pointed to
+ * is valid, and is appropriate for the current processor
+
+ * @param[in] MicrocodePatchPtr - Pointer to Microcode Patch.
+ * @param[in] ProcessorEquivalentId - Pointer to Processor Equivalent ID table.
+ * @param[in,out] StdHeader - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ * @retval TRUE - Patch Found.
+ * @retval FALSE - Patch Not Found.
+ *
+ */
+BOOLEAN
+ValidateMicrocode (
+ IN MICROCODE_PATCH *MicrocodePatchPtr,
+ IN UINT16 ProcessorEquivalentId,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BOOLEAN Chipset1Matched;
+ BOOLEAN Chipset2Matched;
+ PCI_ADDR PciAddress;
+ UINT32 PciDeviceVidDid;
+ UINT8 PciDeviceRevision;
+ UINT8 DevCount;
+ UINT8 FunCount;
+ UINT32 Chipset1DeviceID;
+ UINT32 Chipset2DeviceID;
+ UINT8 MulitFunction;
+
+ Chipset1Matched = FALSE;
+ Chipset2Matched = FALSE;
+ PciDeviceVidDid = 0;
+ PciDeviceRevision = 0;
+ Chipset1DeviceID = MicrocodePatchPtr->Chipset1DeviceID;
+ Chipset2DeviceID = MicrocodePatchPtr->Chipset2DeviceID;
+ MulitFunction = 0;
+
+ //
+ // parse the supplied microcode to see if it is compatible with the processor
+ //
+ if (MicrocodePatchPtr->ProcessorRevisionID != ProcessorEquivalentId) {
+ return (FALSE);
+ }
+
+ if (Chipset1DeviceID == 0) {
+ Chipset1Matched = TRUE;
+ }
+ if (Chipset2DeviceID == 0) {
+ Chipset2Matched = TRUE;
+ }
+
+ if ((!Chipset1Matched) || (!Chipset2Matched)) {
+ //
+ // Scan all PCI devices in Bus 0, try to find out matched case.
+ //
+ for (DevCount = 0; DevCount < 32; DevCount++) {
+ for (FunCount = 0; FunCount < 8; FunCount++) {
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, DevCount, FunCount, 0);
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciDeviceVidDid, StdHeader);
+ if (PciDeviceVidDid == 0xFFFFFFFF) {
+ if (FunCount == 0) {
+ break;
+ } else {
+ continue;
+ }
+ }
+ PciAddress.Address.Register = 0x8;
+ LibAmdPciRead (AccessWidth8, PciAddress, &PciDeviceRevision, StdHeader);
+ if ((!Chipset1Matched) && (PciDeviceVidDid == Chipset1DeviceID)) {
+ if (PciDeviceRevision == MicrocodePatchPtr->Chipset1RevisionID) {
+ Chipset1Matched = TRUE;
+ }
+ }
+ if ((!Chipset2Matched) && (PciDeviceVidDid == Chipset2DeviceID)) {
+ if (PciDeviceRevision == MicrocodePatchPtr->Chipset2RevisionID) {
+ Chipset2Matched = TRUE;
+ }
+ }
+ if (Chipset1Matched && Chipset2Matched) {
+ break;
+ }
+ //
+ // Check multi-function. If it doesen't exist, we don't have to loop functions to 7.
+ //
+ if (FunCount == 0) {
+ MulitFunction = 0;
+ PciAddress.Address.Register = 0xE;
+ LibAmdPciRead (AccessWidth8, PciAddress, &MulitFunction, StdHeader);
+ if ((MulitFunction & 0x80) == 0) {
+ break;
+ }
+ }
+ } // end FunCount for loop.
+
+ if (Chipset1Matched && Chipset2Matched) {
+ break;
+ }
+ } // end DevCount for loop.
+ }
+
+ return (Chipset1Matched && Chipset2Matched);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * GetMicrocodeVersion
+ *
+ * Return the version of the currently loaded microcode patch, if any.
+ * Read from the patch level MSR, return the value in eax. If no patch
+ * has been loaded, 0 will be returned.
+ *
+ * @param[out] pMicrocodeVersion - Pointer to Microcode Version.
+ * @param[in,out] StdHeader - Pointer to AMD_CONFIG_PARAMS struct.
+ *
+ */
+VOID
+GetMicrocodeVersion (
+ OUT UINT32 *pMicrocodeVersion,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 MsrData;
+
+ MsrData = 0;
+ LibAmdMsrRead (0x0000008Bul, &MsrData, StdHeader);
+
+ *pMicrocodeVersion = (UINT32) MsrData;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Update microcode patch in current processor.
+ *
+ * This function acts as a wrapper for calling the LoadMicrocodePatch
+ * routine at AmdInitEarly.
+ *
+ * @param[in] FamilyServices The current Family Specific Services.
+ * @param[in] EarlyParams Service parameters.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ */
+VOID
+LoadMicrocodePatchAtEarly (
+ IN CPU_SPECIFIC_SERVICES *FamilyServices,
+ IN AMD_CPU_EARLY_PARAMS *EarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_TESTPOINT (TpProcCpuLoadUcode, StdHeader);
+ LoadMicrocodePatch (StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPostInit.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPostInit.c
new file mode 100644
index 0000000..605e0c4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPostInit.c
@@ -0,0 +1,416 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU POST API, and related functions.
+ *
+ * Contains code that initialized the CPU after memory init.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ****************************************************************************
+ * AMD Generic Encapsulated Software Architecture
+ *
+ * Description: cpuPostInit.c - Cpu POST Initialization Functions.
+ *
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Options.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "heapManager.h"
+#include "cpuServices.h"
+#include "cpuFeatures.h"
+#include "GeneralServices.h"
+#include "cpuPostInit.h"
+#include "cpuPstateTables.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+#define FILECODE PROC_CPU_CPUPOSTINIT_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+SyncVariableMTRR (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+extern CPU_FAMILY_SUPPORT_TABLE PstateFamilyServiceTable;
+
+extern
+VOID
+ExecuteWbinvdInstruction (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+PstateCreateHeapInfo (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Performs CPU related initialization at the POST entry point
+ *
+ * This function performs a large list of initialization items. These items
+ * include:
+ *
+ * -1 AP MTRR sync
+ * -2 feature leveling
+ * -3 P-state data gather
+ * -4 P-state leveling
+ * -5 AP cache breakdown & release
+ *
+ * @param[in] StdHeader Config handle for library and services
+ * @param[in] PlatformConfig Config handle for platform specific information
+ *
+ * @retval AGESA_SUCCESS
+ *
+ */
+AGESA_STATUS
+AmdCpuPost (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS CalledStatus;
+
+ AgesaStatus = AGESA_SUCCESS;
+ //
+ // Sync variable MTRR
+ //
+ AGESA_TESTPOINT (TpProcCpuApMtrrSync, StdHeader);
+ SyncVariableMTRR (StdHeader);
+
+ AGESA_TESTPOINT (TpProcCpuPostFeatureInit, StdHeader);
+ IDS_HDT_CONSOLE (CPU_TRACE, " Dispatch CPU features after AP MTRR sync\n");
+ CalledStatus = DispatchCpuFeatures (CPU_FEAT_AFTER_POST_MTRR_SYNC, PlatformConfig, StdHeader);
+ if (CalledStatus > AgesaStatus) {
+ AgesaStatus = CalledStatus;
+ }
+ //
+ // Feature Leveling
+ //
+ AGESA_TESTPOINT (TpProcCpuFeatureLeveling, StdHeader);
+ IDS_HDT_CONSOLE (CPU_TRACE, " Perform feature leveling\n");
+ FeatureLeveling (StdHeader);
+ //
+ // P-state Gathered and set heap info
+ //
+ IDS_HDT_CONSOLE (CPU_TRACE, " Create P-state info in the heap\n");
+ PstateCreateHeapInfo (PlatformConfig, StdHeader);
+
+ // Dispatch CPU features before relinquishing control of APs
+ AGESA_TESTPOINT (TpProcCpuBeforeRelinquishAPsFeatureInit, StdHeader);
+ IDS_HDT_CONSOLE (CPU_TRACE, " Dispatch CPU features before Relinquishing control of APs\n");
+ CalledStatus = DispatchCpuFeatures (CPU_FEAT_BEFORE_RELINQUISH_AP, PlatformConfig, StdHeader);
+ if (CalledStatus > AgesaStatus) {
+ AgesaStatus = CalledStatus;
+ }
+
+ // Relinquish control of all APs to IBV.
+ IDS_HDT_CONSOLE (CPU_TRACE, " Relinquish control of APs\n");
+ RelinquishControlOfAllAPs (StdHeader);
+
+ return (AgesaStatus);
+}
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determines the address in system DRAM that should be used for p-state data
+ * gather and leveling.
+ *
+ * @param[out] Ptr Address to utilize
+ * @param[in] StdHeader Config handle for library and services
+ *
+ * @retval AGESA_SUCCESS
+ *
+ */
+AGESA_STATUS
+GetPstateGatherDataAddressAtPost (
+ OUT UINT64 **Ptr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 AddressValue;
+
+ AddressValue = P_STATE_DATA_GATHER_TEMP_ADDR;
+
+ *Ptr = (UINT64 *)(UINT32)(AddressValue);
+
+ return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * AP task to sync memory subsystem MSRs with the BSC
+ *
+ * This function processes a list of MSRs and the BSC's current values for those
+ * MSRs. This will allow the APs to see system RAM.
+ *
+ * @param[in] MtrrTable Memory related MSR table
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+VOID
+SyncAllApMtrrToBsc (
+ IN VOID *MtrrTable,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+
+ for (i = 0; ((BSC_AP_MSR_SYNC *) MtrrTable)[i].RegisterAddress != 0; i++) {
+ LibAmdMsrWrite (((BSC_AP_MSR_SYNC *) MtrrTable)[i].RegisterAddress,
+ &((BSC_AP_MSR_SYNC *) MtrrTable)[i].RegisterValue,
+ StdHeader);
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Creates p-state information on the heap
+ *
+ * This function gathers p-state information from all processors in the system,
+ * determines a level set of p-states, and places that information into the
+ * heap. This heap data will be used by GenerateSsdt to generate the
+ * final _PSS and XPSS objects.
+ *
+ * @param[in] PlatformConfig Pointer to runtime configuration options
+ * @param[in] StdHeader Config handle for library and services
+ *
+ * @retval AGESA_SUCCESS No error
+ * @retval AGESA_ERROR CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE
+ */
+AGESA_STATUS
+PstateCreateHeapInfo (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ S_CPU_AMD_PSTATE *PStateBufferPtr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ UINT8 *PStateBufferPtrInHeap;
+
+ ASSERT (IsBsp (StdHeader, &AgesaStatus));
+
+ //
+ //Get proper address for gather data pool address
+ //Zero P-state gather data pool
+ //
+ GetPstateGatherDataAddressAtPost ((UINT64 **)&PStateBufferPtr, StdHeader);
+ LibAmdMemFill (PStateBufferPtr, 0, sizeof (S_CPU_AMD_PSTATE), StdHeader);
+
+ //
+ //Get all the CPUs P-States and fill the PStateBufferPtr for each core
+ //
+ AgesaStatus = PStateGatherData (PlatformConfig, PStateBufferPtr, StdHeader);
+ if (AgesaStatus != AGESA_SUCCESS) {
+ return AgesaStatus;
+ }
+
+ //
+ //Do Pstate Leveling for each core if needed.
+ //
+ AgesaStatus = PStateLeveling (PStateBufferPtr, StdHeader);
+
+ //
+ //Create Heap and store p-state data for ACPI table in CpuLate
+ //
+ AllocHeapParams.RequestedBufferSize = PStateBufferPtr->SizeOfBytes;
+ AllocHeapParams.BufferHandle = AMD_PSTATE_DATA_BUFFER_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ AgesaStatus = HeapAllocateBuffer (&AllocHeapParams, StdHeader);
+ if (AgesaStatus == AGESA_SUCCESS) {
+ //
+ // Zero Buffer
+ //
+ PStateBufferPtrInHeap = (UINT8 *) AllocHeapParams.BufferPtr;
+ LibAmdMemFill (PStateBufferPtrInHeap, 0, PStateBufferPtr->SizeOfBytes, StdHeader);
+ LibAmdMemCopy (PStateBufferPtrInHeap, PStateBufferPtr, PStateBufferPtr->SizeOfBytes, StdHeader);
+
+ } else {
+ PutEventLog (AGESA_ERROR,
+ CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE,
+ 0, 0, 0, 0, StdHeader);
+ }
+
+ return AgesaStatus;
+}
+
+VOID
+SyncApMsrsToBsc (
+ IN OUT BSC_AP_MSR_SYNC *ApMsrSync,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AP_TASK TaskPtr;
+ UINT16 i;
+ UINT32 BscSocket;
+ UINT32 Ignored;
+ UINT32 BscCoreNum;
+ UINT32 Core;
+ UINT32 Socket;
+ UINT32 NumberOfSockets;
+ UINT32 NumberOfCores;
+ AGESA_STATUS IgnoredSts;
+
+ ASSERT (IsBsp (StdHeader, &IgnoredSts));
+
+ IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+
+ //
+ //Sync all MTRR settings with BSP
+ //
+ for (i = 0; ApMsrSync[i].RegisterAddress != 0; i++) {
+ LibAmdMsrRead (ApMsrSync[i].RegisterAddress, &ApMsrSync[i].RegisterValue, StdHeader);
+ }
+
+ TaskPtr.FuncAddress.PfApTaskI = SyncAllApMtrrToBsc;
+ TaskPtr.DataTransfer.DataSizeInDwords = (UINT16) ((((sizeof (BSC_AP_MSR_SYNC)) * i) + 4) >> 2);
+ TaskPtr.ExeFlags = WAIT_FOR_CORE;
+ TaskPtr.DataTransfer.DataPtr = ApMsrSync;
+ TaskPtr.DataTransfer.DataTransferFlags = 0;
+
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+ for (Core = 0; Core < NumberOfCores; Core++) {
+ if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+ ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+ }
+ }
+ }
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * SyncVariableMTRR
+ *
+ * Sync variable MTRR
+ *
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+VOID
+STATIC
+SyncVariableMTRR (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BSC_AP_MSR_SYNC ApMsrSync[20];
+
+ ApMsrSync[0].RegisterAddress = SYS_CFG;
+ ApMsrSync[1].RegisterAddress = TOP_MEM;
+ ApMsrSync[2].RegisterAddress = TOP_MEM2;
+ ApMsrSync[3].RegisterAddress = 0x200;
+ ApMsrSync[4].RegisterAddress = 0x201;
+ ApMsrSync[5].RegisterAddress = 0x202;
+ ApMsrSync[6].RegisterAddress = 0x203;
+ ApMsrSync[7].RegisterAddress = 0x204;
+ ApMsrSync[8].RegisterAddress = 0x205;
+ ApMsrSync[9].RegisterAddress = 0x206;
+ ApMsrSync[10].RegisterAddress = 0x207;
+ ApMsrSync[11].RegisterAddress = 0x208;
+ ApMsrSync[12].RegisterAddress = 0x209;
+ ApMsrSync[13].RegisterAddress = 0x20A;
+ ApMsrSync[14].RegisterAddress = 0x20B;
+ ApMsrSync[15].RegisterAddress = 0xC0010016;
+ ApMsrSync[16].RegisterAddress = 0xC0010017;
+ ApMsrSync[17].RegisterAddress = 0xC0010018;
+ ApMsrSync[18].RegisterAddress = 0xC0010019;
+ ApMsrSync[19].RegisterAddress = 0;
+ SyncApMsrsToBsc (ApMsrSync, StdHeader);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * The function suppose to do any thing need to be done at the end of AmdInitPost.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ *
+ * @retval AGESA_SUCCESS
+ *
+ */
+AGESA_STATUS
+FinalizeAtPost (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ //
+ // Execute wbinvd to ensure heap data in cache write back to memory.
+ //
+ ExecuteWbinvdInstruction (StdHeader);
+
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPostInit.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPostInit.h
new file mode 100644
index 0000000..2d192fe
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPostInit.h
@@ -0,0 +1,233 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Reset API, and related functions and structures.
+ *
+ * Contains code that initialized the CPU after early reset.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_POST_INIT_H_
+#define _CPU_POST_INIT_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (CPU_CFOH_FAMILY_SERVICES);
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+#define P_STATE_DATA_GATHER_TEMP_ADDR 0x200000ul ///< Fixed the row data at 2M memory address.
+#define GLOBAL_CPU_FEATURE_LIST_TEMP_ADDR 0x200000ul ///< Fixed the row data at 2M memory address.
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+//----------------------------------------------------------------------------
+// CPU FEATURE LEVELING TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// CPU FEATURE LIST
+typedef struct {
+ UINT8 ABM:1; ///< byte 0 bit 0
+ UINT8 AES:1; ///< byte 0 bit 1
+ UINT8 AltMovCr8:1; ///< byte 0 bit 2
+ UINT8 APIC:1; ///< byte 0 bit 3
+ UINT8 AVX:1; ///< byte 0 bit 4
+ UINT8 CLFSH:1; ///< byte 0 bit 5
+ UINT8 CMOV:1; ///< byte 0 bit 6
+ UINT8 CmpLegacy:1; ///< byte 0 bit 7
+ UINT8 CMPXCHG8B:1; ///< byte 1 bit 0
+ UINT8 CMPXCHG16B:1; ///< byte 1 bit 1
+ UINT8 CVT16:1; ///< byte 1 bit 2
+ UINT8 DE:1; ///< byte 1 bit 3
+ UINT8 ExtApicSpace:1; ///< byte 1 bit 4
+ UINT8 FFXSR:1; ///< byte 1 bit 5
+ UINT8 FMA:1; ///< byte 1 bit 6
+ UINT8 FMA4:1; ///< byte 1 bit 7
+ UINT8 FPU:1; ///< byte 2 bit 0
+ UINT8 FXSR:1; ///< byte 2 bit 1
+ UINT8 HTT:1; ///< byte 2 bit 2
+ UINT8 IBS:1; ///< byte 2 bit 3
+ UINT8 LahfSahf:1; ///< byte 2 bit 4
+ UINT8 LM:1; ///< byte 2 bit 5
+ UINT8 LWP:1; ///< byte 2 bit 6
+ UINT8 MCA:1; ///< byte 2 bit 7
+ UINT8 MCE:1; ///< byte 3 bit 0
+ UINT8 MisAlignSse:1; ///< byte 3 bit 1
+ UINT8 MMX:1; ///< byte 3 bit 2
+ UINT8 MmxExt:1; ///< byte 3 bit 3
+ UINT8 Monitor:1; ///< byte 3 bit 4
+ UINT8 MSR:1; ///< byte 3 bit 5
+ UINT8 MTRR:1; ///< byte 3 bit 6
+ UINT8 NodeId:1; ///< byte 3 bit 7
+ UINT8 NX:1; ///< byte 4 bit 0
+ UINT8 OSVW:1; ///< byte 4 bit 1
+ UINT8 OSXSAVE:1; ///< byte 4 bit 2
+ UINT8 PAE:1; ///< byte 4 bit 3
+ UINT8 Page1GB:1; ///< byte 4 bit 4
+ UINT8 PAT:1; ///< byte 4 bit 5
+ UINT8 PCLMULQDQ:1; ///< byte 4 bit 6
+ UINT8 PGE:1; ///< byte 4 bit 7
+ UINT8 POPCNT:1; ///< byte 5 bit 0
+ UINT8 PSE:1; ///< byte 5 bit 1
+ UINT8 PSE36:1; ///< byte 5 bit 2
+ UINT8 RDTSCP:1; ///< byte 5 bit 3
+ UINT8 SKINIT:1; ///< byte 5 bit 4
+ UINT8 SSE:1; ///< byte 5 bit 5
+ UINT8 SSE2:1; ///< byte 5 bit 6
+ UINT8 SSE3:1; ///< byte 5 bit 7
+ UINT8 SSE4A:1; ///< byte 6 bit 0
+ UINT8 SSE41:1; ///< byte 6 bit 1
+ UINT8 SSE42:1; ///< byte 6 bit 2
+ UINT8 SSE5:1; ///< byte 6 bit 3
+ UINT8 SSSE3:1; ///< byte 6 bit 4
+ UINT8 SVM:1; ///< byte 6 bit 5
+ UINT8 SysCallSysRet:1; ///< byte 6 bit 6
+ UINT8 SysEnterSysExit:1; ///< byte 6 bit 7
+ UINT8 TBM0:1; ///< byte 7 bit 0
+ UINT8 TCE:1; ///< byte 7 bit 1
+ UINT8 ThreeDNow:1; ///< byte 7 bit 2
+ UINT8 ThreeDNowExt:1; ///< byte 7 bit 3
+ UINT8 ThreeDNowPrefetch:1; ///< byte 7 bit 4
+ UINT8 TimeStampCounter:1; ///< byte 7 bit 5
+ UINT8 VME:1; ///< byte 7 bit 6
+ UINT8 WDT:1; ///< byte 7 bit 7
+ UINT8 X2APIC:1; ///< byte 8 bit 0
+ UINT8 XOP:1; ///< byte 8 bit 1
+ UINT8 XSAVE:1; ///< byte 8 bit 2
+ UINT8 Reserve:5; ///< Reserved
+} CPU_FEATURES_LIST;
+
+//----------------------------------------------------------------------------
+// POST INIT TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// BSC to AP MSR sync up
+typedef struct {
+ UINT32 RegisterAddress; ///< MSR Address
+ UINT64 RegisterValue; ///< BSC's MSR Value
+} BSC_AP_MSR_SYNC;
+
+/**
+ * Set Cache Flush On Halt Register.
+ *
+ * @CpuServiceInstances
+ *
+ * @param[in] FamilySpecificServices The current Family Specific Services.
+ * @param[in] EntryPoint Timepoint designator.
+ * @param[in] PlatformConfig Contains the runtime modifiable feature input data.
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ */
+typedef VOID (F_CPU_SET_CFOH_REG) (
+ IN CPU_CFOH_FAMILY_SERVICES *FamilySpecificServices,
+ IN UINT64 EntryPoint,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+ /// Reference to a Method.
+typedef F_CPU_SET_CFOH_REG *PF_CPU_SET_CFOH_REG;
+
+/**
+ * Provide the interface to the Cache Flush On Halt Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _CPU_CFOH_FAMILY_SERVICES { // See forward reference above
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_CPU_SET_CFOH_REG SetCacheFlushOnHaltRegister; ///< Method: Set Cache Flush On Halt register.
+};
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+// These are P U B L I C functions, used by IBVs
+AGESA_STATUS
+AmdCpuPost (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfig
+ );
+
+// These are P U B L I C functions, used by AGESA
+
+VOID
+FeatureLeveling (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+CopyHeapToTempRamAtPost (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+SyncApMsrsToBsc (
+ IN OUT BSC_AP_MSR_SYNC *ApMsrSync,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+FinalizeAtPost (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GetPstateGatherDataAddressAtPost (
+ OUT UINT64 **Ptr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+SyncAllApMtrrToBsc (
+ IN VOID *MtrrTable,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+#endif // _CPU_POST_INIT_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPowerMgmt.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPowerMgmt.c
new file mode 100644
index 0000000..303e8d7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPowerMgmt.c
@@ -0,0 +1,275 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Power Management functions.
+ *
+ * Contains code for doing early power management
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "OptionMultiSocket.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "cpuPowerMgmtSystemTables.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_CPUPOWERMGMT_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+STATIC
+PerformThisPmStep (
+ IN VOID *Step,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+ );
+
+VOID
+STATIC
+GoToMemInitPstateCore0 (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+ );
+
+VOID
+STATIC
+GoToMemInitPstateCore (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform the "BIOS Requirements for P-State Initialization and Transitions."
+ *
+ * This is the generic arbiter code to be executed by the BSC. The system power
+ * management init tables will be traversed. This must be run by the system BSC
+ * only.
+ *
+ * @param[in] CpuEarlyParams Required input parameters for early CPU initialization
+ * @param[in] StdHeader Config handle for library and services
+ *
+ * @return Most severe AGESA_STATUS level that any system processor encountered
+ *
+ */
+AGESA_STATUS
+PmInitializationAtEarly (
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+ UINT8 NumberOfSystemWideSteps;
+ AP_TASK TaskPtr;
+ AGESA_STATUS ReturnCode;
+ WARM_RESET_REQUEST Request;
+
+ // Determine the number of steps to perform
+ OptionMultiSocketConfiguration.GetNumberOfSystemPmSteps (&NumberOfSystemWideSteps, StdHeader);
+
+ // Traverse the PM init table
+ TaskPtr.FuncAddress.PfApTaskIC = PerformThisPmStep;
+ TaskPtr.DataTransfer.DataSizeInDwords = 1;
+ TaskPtr.DataTransfer.DataPtr = &i;
+ TaskPtr.DataTransfer.DataTransferFlags = 0;
+ TaskPtr.ExeFlags = PASS_EARLY_PARAMS;
+ for (i = 0; i < NumberOfSystemWideSteps; ++i) {
+ IDS_HDT_CONSOLE (CPU_TRACE, " Perform PM init step %d\n", i);
+ OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, CpuEarlyParams);
+ }
+
+ // GoToMemInitPstateCore0 only if there is no pending warm reset.
+ GetWarmResetFlag (StdHeader, &Request);
+ if (Request.RequestBit == FALSE) {
+ TaskPtr.FuncAddress.PfApTaskC = GoToMemInitPstateCore0;
+ TaskPtr.DataTransfer.DataSizeInDwords = 0;
+ TaskPtr.ExeFlags = PASS_EARLY_PARAMS;
+ IDS_HDT_CONSOLE (CPU_TRACE, " Transition all cores to POST P-state\n");
+ OptionMultiSocketConfiguration.BscRunCodeOnAllSystemCore0s (&TaskPtr, StdHeader, CpuEarlyParams);
+ }
+
+ // Retrieve/Process any errors
+ ReturnCode = OptionMultiSocketConfiguration.BscRetrievePmEarlyInitErrors (StdHeader);
+
+ return (ReturnCode);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Performs the next step in the executing core 0's family specific power
+ * management table.
+ *
+ * This function determines if the input step is valid, and invokes the power
+ * management step if appropriate. This must be run by processor core 0s only.
+ *
+ * @param[in] Step Zero based step number
+ * @param[in] StdHeader Config handle for library and services
+ * @param[in] CpuEarlyParamsPtr Required input parameters for early CPU initialization
+ *
+ */
+VOID
+STATIC
+PerformThisPmStep (
+ IN VOID *Step,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+ )
+{
+ UINT8 MyNumberOfSteps;
+ UINT32 ExeResetFlags;
+ SYS_PM_TBL_STEP *FamilyTablePtr;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ BOOLEAN ThisIsWarmReset;
+ BOOLEAN NoResetLimit;
+ BOOLEAN NotConflictResetLimit;
+ BOOLEAN WarmResetOnly;
+ BOOLEAN ColdResetOnly;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->GetSysPmTableStruct (FamilySpecificServices, (CONST VOID **) &FamilyTablePtr, &MyNumberOfSteps, StdHeader);
+
+ if (*(UINT8 *)Step < MyNumberOfSteps) {
+ if (FamilyTablePtr[*(UINT8 *)Step].FuncPtr != NULL) {
+ ExeResetFlags = FamilyTablePtr[*(UINT8 *)Step].ExeFlags & (PM_EXEFLAGS_COLD_ONLY | PM_EXEFLAGS_WARM_ONLY);
+ ThisIsWarmReset = IsWarmReset (StdHeader);
+ NoResetLimit = (ExeResetFlags == 0) ? TRUE : FALSE;
+ NotConflictResetLimit = (BOOLEAN) (ExeResetFlags != (PM_EXEFLAGS_COLD_ONLY | PM_EXEFLAGS_WARM_ONLY));
+ WarmResetOnly = (BOOLEAN) ((ExeResetFlags & PM_EXEFLAGS_WARM_ONLY) == PM_EXEFLAGS_WARM_ONLY);
+ ColdResetOnly = (BOOLEAN) ((ExeResetFlags & PM_EXEFLAGS_COLD_ONLY) == PM_EXEFLAGS_COLD_ONLY);
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " \tIsWarmReset = %d.\n", ThisIsWarmReset);
+ IDS_HDT_CONSOLE (CPU_TRACE, " \tNoResetLimit = %d\n", NoResetLimit);
+ IDS_HDT_CONSOLE (CPU_TRACE, " \tNotConflictResetLimit = %d\n", NotConflictResetLimit);
+ IDS_HDT_CONSOLE (CPU_TRACE, " \tWarmResetOnly = %d\n", WarmResetOnly);
+ IDS_HDT_CONSOLE (CPU_TRACE, " \tColdResetOnly = %d\n", ColdResetOnly);
+
+ ASSERT (NotConflictResetLimit);
+
+ if (NoResetLimit ||
+ (NotConflictResetLimit &&
+ ((WarmResetOnly && ThisIsWarmReset) || (ColdResetOnly && !ThisIsWarmReset)))) {
+ FamilyTablePtr[*(UINT8 *)Step].FuncPtr (FamilySpecificServices, CpuEarlyParamsPtr, StdHeader);
+ } else {
+ IDS_HDT_CONSOLE (CPU_TRACE, " \t\tThis PM init step was skipped!\n");
+ }
+ }
+ }
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Transitions the executing processor to the desired P-state.
+ *
+ * This function implements the AMD_CPU_EARLY_PARAMS.MemInitPState parameter, and is
+ * run by all processor core 0s.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ * @param[in] CpuEarlyParamsPtr Required input parameters for early CPU initialization
+ *
+ */
+VOID
+STATIC
+GoToMemInitPstateCore0 (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+ )
+{
+ AP_TASK TaskPtr;
+
+ TaskPtr.FuncAddress.PfApTaskC = GoToMemInitPstateCore;
+ TaskPtr.DataTransfer.DataSizeInDwords = 0;
+ TaskPtr.ExeFlags = WAIT_FOR_CORE | PASS_EARLY_PARAMS;
+ ApUtilRunCodeOnAllLocalCoresAtEarly (&TaskPtr, StdHeader, CpuEarlyParamsPtr);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Transitions the executing core to the desired P-state.
+ *
+ * This function implements the AMD_CPU_EARLY_PARAMS.MemInitPState parameter, and is
+ * run by all system cores.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ * @param[in] CpuEarlyParamsPtr Required input parameters for early CPU initialization
+ *
+ */
+VOID
+STATIC
+GoToMemInitPstateCore (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr
+ )
+{
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->TransitionPstate (FamilySpecificServices, CpuEarlyParamsPtr->MemInitPState, (BOOLEAN) FALSE, StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPowerMgmtSingleSocket.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPowerMgmtSingleSocket.c
new file mode 100644
index 0000000..4009972
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPowerMgmtSingleSocket.c
@@ -0,0 +1,332 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Power Management Single Socket Functions.
+ *
+ * Contains code for doing power management for single socket CPU
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPowerMgmtSystemTables.h"
+#include "cpuPowerMgmtSingleSocket.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_CPUPOWERMGMTSINGLESOCKET_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Single socket BSC call to start all system core 0s to perform a standard AP_TASK.
+ *
+ * This function will simply invoke the task on the executing core. This must be
+ * run by the system BSC only.
+ *
+ * @param[in] TaskPtr Function descriptor
+ * @param[in] StdHeader Config handle for library and services
+ * @param[in] ConfigParams AMD entry point's CPU parameter structure
+ *
+ * @return The severe error code from AP_TASK
+ *
+ */
+AGESA_STATUS
+RunCodeOnAllSystemCore0sSingle (
+ IN AP_TASK *TaskPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN VOID *ConfigParams
+ )
+{
+ AGESA_STATUS CalledStatus;
+
+ CalledStatus = ApUtilTaskOnExecutingCore (TaskPtr, StdHeader, ConfigParams);
+ return CalledStatus;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Single socket BSC call to determine the maximum number of steps that any single
+ * processor needs to execute.
+ *
+ * This function simply returns the number of steps that the BSC needs.
+ *
+ * @param[out] NumSystemSteps Maximum number of system steps required
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+VOID
+GetNumberOfSystemPmStepsPtrSingle (
+ OUT UINT8 *NumSystemSteps,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ SYS_PM_TBL_STEP *Ignored;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->GetSysPmTableStruct (FamilySpecificServices, (CONST VOID **) &Ignored, NumSystemSteps, StdHeader);
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Single socket call to determine the frequency that the northbridges must run.
+ *
+ * This function simply returns the executing core's NB frequency, and that all
+ * NB frequencies are equivalent.
+ *
+ * @param[in] NbPstate NB P-state number to check (0 = fastest)
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[out] SystemNbCofNumerator NB frequency numerator for the system in MHz
+ * @param[out] SystemNbCofDenominator NB frequency denominator for the system
+ * @param[out] SystemNbCofsMatch Whether or not all NB frequencies are equivalent
+ * @param[out] NbPstateIsEnabledOnAllCPUs Whether or not NbPstate is valid on all CPUs
+ * @param[in] StdHeader Config handle for library and services
+ *
+ * @retval TRUE At least one processor has NbPstate enabled.
+ * @retval FALSE NbPstate is disabled on all CPUs
+ *
+ */
+BOOLEAN
+GetSystemNbCofSingle (
+ IN UINT32 NbPstate,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT UINT32 *SystemNbCofNumerator,
+ OUT UINT32 *SystemNbCofDenominator,
+ OUT BOOLEAN *SystemNbCofsMatch,
+ OUT BOOLEAN *NbPstateIsEnabledOnAllCPUs,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Ignored;
+ PCI_ADDR PciAddress;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+ *SystemNbCofsMatch = TRUE;
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ *NbPstateIsEnabledOnAllCPUs = FamilySpecificServices->GetNbPstateInfo (FamilySpecificServices,
+ PlatformConfig,
+ &PciAddress,
+ NbPstate,
+ SystemNbCofNumerator,
+ SystemNbCofDenominator,
+ &Ignored,
+ StdHeader);
+ return *NbPstateIsEnabledOnAllCPUs;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Single socket call to determine if the BIOS is responsible for updating the
+ * northbridge operating frequency and voltage.
+ *
+ * This function simply returns whether or not the executing core needs NB COF
+ * VID programming.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ *
+ * @retval TRUE BIOS needs to set up NB frequency and voltage
+ * @retval FALSE BIOS does not need to set up NB frequency and voltage
+ *
+ */
+BOOLEAN
+GetSystemNbCofVidUpdateSingle (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BOOLEAN Ignored;
+ PCI_ADDR PciAddress;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ return (FamilySpecificServices->IsNbCofInitNeeded (FamilySpecificServices, &PciAddress, &Ignored, StdHeader));
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Single socket call to determine the most severe AGESA_STATUS return value after
+ * processing the power management initialization tables.
+ *
+ * This function searches the event log for the most severe error and returns
+ * the status code. This function must be called by the BSC only.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ *
+ * @return The most severe error code from power management init
+ *
+ */
+AGESA_STATUS
+GetEarlyPmErrorsSingle (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 i;
+ AGESA_EVENT EventLogEntry;
+ AGESA_STATUS ReturnCode;
+
+ ASSERT (IsBsp (StdHeader, &ReturnCode));
+
+ ReturnCode = AGESA_SUCCESS;
+ for (i = 0; PeekEventLog (&EventLogEntry, i, StdHeader); i++) {
+ if ((EventLogEntry.EventInfo & CPU_EVENT_PM_EVENT_MASK) == CPU_EVENT_PM_EVENT_CLASS) {
+ if (EventLogEntry.EventClass > ReturnCode) {
+ ReturnCode = EventLogEntry.EventClass;
+ }
+ }
+ }
+
+ return (ReturnCode);
+}
+
+/**
+ * Single socket call to loop through all Nb Pstates, comparing the NB frequencies
+ * to determine the slowest in the system. This routine also returns the NB P0 frequency.
+ *
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[out] MinSysNbFreq NB frequency numerator for the system in MHz
+ * @param[out] MinP0NbFreq NB frequency numerator for P0 in MHz
+ * @param[in] StdHeader Config handle for library and services
+ */
+VOID
+GetMinNbCofSingle (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT UINT32 *MinSysNbFreq,
+ OUT UINT32 *MinP0NbFreq,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ AGESA_STATUS AgesaStatus;
+
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ AgesaStatus = FamilySpecificServices->GetMinMaxNbFrequency (FamilySpecificServices,
+ PlatformConfig,
+ &PciAddress,
+ MinSysNbFreq,
+ MinP0NbFreq,
+ StdHeader);
+ ASSERT (AgesaStatus == AGESA_SUCCESS);
+ ASSERT ((MinSysNbFreq != 0) && (MinP0NbFreq != 0));
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get PCI Config Space Address for the current running core.
+ *
+ * @param[out] PciAddress The Processor's PCI Config Space address (Function 0, Register 0)
+ * @param[in] StdHeader Header for library and services.
+ *
+ * @retval TRUE The core is present, PCI Address valid
+ * @retval FALSE The core is not present, PCI Address not valid.
+ */
+BOOLEAN
+GetCurrPciAddrSingle (
+ OUT PCI_ADDR *PciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PciAddress->AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+
+ return TRUE;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Writes to all nodes on the executing core's socket.
+ *
+ * @param[in] PciAddress The Function and Register to update
+ * @param[in] Mask The bitwise AND mask to apply to the current register value
+ * @param[in] Data The bitwise OR mask to apply to the current register value
+ * @param[in] StdHeader Header for library and services.
+ *
+ */
+VOID
+ModifyCurrSocketPciSingle (
+ IN PCI_ADDR *PciAddress,
+ IN UINT32 Mask,
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 LocalPciRegister;
+ PCI_ADDR Reg;
+
+ Reg.AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0);
+ Reg.Address.Function = PciAddress->Address.Function;
+ Reg.Address.Register = PciAddress->Address.Register;
+ LibAmdPciRead (AccessWidth32, Reg, &LocalPciRegister, StdHeader);
+ LocalPciRegister &= Mask;
+ LocalPciRegister |= Data;
+ LibAmdPciWrite (AccessWidth32, Reg, &LocalPciRegister, StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPowerMgmtSingleSocket.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPowerMgmtSingleSocket.h
new file mode 100644
index 0000000..0a3024c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPowerMgmtSingleSocket.h
@@ -0,0 +1,127 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Power Management Single Socket Functions.
+ *
+ * Contains code for doing power management for single socket CPU
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_POWER_MGMT_SINGLE_SOCKET_H_
+#define _CPU_POWER_MGMT_SINGLE_SOCKET_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+RunCodeOnAllSystemCore0sSingle (
+ IN AP_TASK *TaskPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN VOID *ConfigParams
+ );
+
+VOID
+GetNumberOfSystemPmStepsPtrSingle (
+ OUT UINT8 *NumSystemSteps,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GetSystemNbCofSingle (
+ IN UINT32 NbPstate,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT UINT32 *SystemNbCofNumerator,
+ OUT UINT32 *SystemNbCofDenominator,
+ OUT BOOLEAN *SystemNbCofsMatch,
+ OUT BOOLEAN *NbPstateIsEnabledOnAllCPUs,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GetSystemNbCofVidUpdateSingle (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GetMinNbCofSingle (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ OUT UINT32 *MinSysNbFreq,
+ OUT UINT32 *MinP0NbFreq,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GetCurrPciAddrSingle (
+ OUT PCI_ADDR *PciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+ModifyCurrSocketPciSingle (
+ IN PCI_ADDR *PciAddress,
+ IN UINT32 Mask,
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GetEarlyPmErrorsSingle (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _CPU_POWER_MGMT_SINGLE_SOCKET_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPowerMgmtSystemTables.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPowerMgmtSystemTables.h
new file mode 100644
index 0000000..64baf46
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuPowerMgmtSystemTables.h
@@ -0,0 +1,93 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Power Management Table declarations.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_POWER_MGMT_SYSTEM_TABLES_H_
+#define _CPU_POWER_MGMT_SYSTEM_TABLES_H_
+
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+#define PM_EXEFLAGS_WARM_ONLY 0x00000001ul /* Skip step if set && cold reset */
+#define PM_EXEFLAGS_COLD_ONLY 0x00000002ul /* Skip step if set && warm reset */
+#define PM_EXEFLAGS_NOT_ON_S3 0x00000004ul /* Skip step if S3 resume */
+#define PM_EXEFLAGS_SYSTEM_TASK 0x00000008ul /* Future use */
+#define PM_EXEFLAGS_SERIAL_EXE 0x00000010ul /* BSC will wait for remote core 0 to complete the step*/
+
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+typedef VOID F_PM_STEP_FUNCTION (
+ IN CPU_SPECIFIC_SERVICES *FamilySpecificServices,
+ IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// Reference to a Method.
+typedef F_PM_STEP_FUNCTION *PF_PM_STEP_FUNCTION;
+
+
+/// A structure representing a step in a power management
+/// initialization process to be invoked at AmdInitEarly
+typedef struct {
+ UINT32 ExeFlags; ///< Execution flags
+ PF_PM_STEP_FUNCTION FuncPtr; ///< Function pointer
+} SYS_PM_TBL_STEP;
+
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+
+#endif // _CPU_POWER_MGMT_SYSTEM_TABLES_H_/
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuRegisters.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuRegisters.h
new file mode 100644
index 0000000..e59bb88
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuRegisters.h
@@ -0,0 +1,498 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Register Table Related Functions
+ *
+ * Contains the definition of the CPU CPUID MSRs and PCI registers with BKDG recommended values
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 85246 $ @e \$Date: 2013-01-04 13:05:13 -0600 (Fri, 04 Jan 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_REGISTERS_H_
+#define _CPU_REGISTERS_H_
+
+#include "cpuFamRegisters.h"
+/*
+ *--------------------------------------------------------------
+ *
+ * M O D U L E S U S E D
+ *
+ *---------------------------------------------------------------
+ */
+
+/*
+ *--------------------------------------------------------------
+ *
+ * D E F I N I T I O N S / M A C R O S
+ *
+ *---------------------------------------------------------------
+ */
+
+#undef BIT0
+#undef BIT1
+#undef BIT2
+#undef BIT3
+#undef BIT4
+#undef BIT5
+#undef BIT6
+#undef BIT7
+#undef BIT8
+#undef BIT9
+#undef BIT10
+#undef BIT10
+#undef BIT11
+#undef BIT12
+#undef BIT13
+#undef BIT14
+#undef BIT15
+#undef BIT16
+#undef BIT17
+#undef BIT18
+#undef BIT19
+#undef BIT20
+#undef BIT21
+#undef BIT22
+#undef BIT23
+#undef BIT24
+#undef BIT25
+#undef BIT26
+#undef BIT27
+#undef BIT28
+#undef BIT29
+#undef BIT30
+#undef BIT31
+#undef BIT32
+#undef BIT33
+#undef BIT34
+#undef BIT35
+#undef BIT36
+#undef BIT37
+#undef BIT38
+#undef BIT39
+#undef BIT40
+#undef BIT41
+#undef BIT42
+#undef BIT43
+#undef BIT44
+#undef BIT45
+#undef BIT46
+#undef BIT47
+#undef BIT48
+#undef BIT49
+#undef BIT40
+#undef BIT41
+#undef BIT42
+#undef BIT43
+#undef BIT44
+#undef BIT45
+#undef BIT46
+#undef BIT47
+#undef BIT48
+#undef BIT49
+#undef BIT50
+#undef BIT51
+#undef BIT52
+#undef BIT53
+#undef BIT54
+#undef BIT55
+#undef BIT56
+#undef BIT57
+#undef BIT58
+#undef BIT59
+#undef BIT60
+#undef BIT61
+#undef BIT62
+#undef BIT63
+
+#define BIT0 0x0000000000000001ull
+#define BIT1 0x0000000000000002ull
+#define BIT2 0x0000000000000004ull
+#define BIT3 0x0000000000000008ull
+#define BIT4 0x0000000000000010ull
+#define BIT5 0x0000000000000020ull
+#define BIT6 0x0000000000000040ull
+#define BIT7 0x0000000000000080ull
+#define BIT8 0x0000000000000100ull
+#define BIT9 0x0000000000000200ull
+#define BIT10 0x0000000000000400ull
+#define BIT11 0x0000000000000800ull
+#define BIT12 0x0000000000001000ull
+#define BIT13 0x0000000000002000ull
+#define BIT14 0x0000000000004000ull
+#define BIT15 0x0000000000008000ull
+#define BIT16 0x0000000000010000ull
+#define BIT17 0x0000000000020000ull
+#define BIT18 0x0000000000040000ull
+#define BIT19 0x0000000000080000ull
+#define BIT20 0x0000000000100000ull
+#define BIT21 0x0000000000200000ull
+#define BIT22 0x0000000000400000ull
+#define BIT23 0x0000000000800000ull
+#define BIT24 0x0000000001000000ull
+#define BIT25 0x0000000002000000ull
+#define BIT26 0x0000000004000000ull
+#define BIT27 0x0000000008000000ull
+#define BIT28 0x0000000010000000ull
+#define BIT29 0x0000000020000000ull
+#define BIT30 0x0000000040000000ull
+#define BIT31 0x0000000080000000ull
+#define BIT32 0x0000000100000000ull
+#define BIT33 0x0000000200000000ull
+#define BIT34 0x0000000400000000ull
+#define BIT35 0x0000000800000000ull
+#define BIT36 0x0000001000000000ull
+#define BIT37 0x0000002000000000ull
+#define BIT38 0x0000004000000000ull
+#define BIT39 0x0000008000000000ull
+#define BIT40 0x0000010000000000ull
+#define BIT41 0x0000020000000000ull
+#define BIT42 0x0000040000000000ull
+#define BIT43 0x0000080000000000ull
+#define BIT44 0x0000100000000000ull
+#define BIT45 0x0000200000000000ull
+#define BIT46 0x0000400000000000ull
+#define BIT47 0x0000800000000000ull
+#define BIT48 0x0001000000000000ull
+#define BIT49 0x0002000000000000ull
+#define BIT50 0x0004000000000000ull
+#define BIT51 0x0008000000000000ull
+#define BIT52 0x0010000000000000ull
+#define BIT53 0x0020000000000000ull
+#define BIT54 0x0040000000000000ull
+#define BIT55 0x0080000000000000ull
+#define BIT56 0x0100000000000000ull
+#define BIT57 0x0200000000000000ull
+#define BIT58 0x0400000000000000ull
+#define BIT59 0x0800000000000000ull
+#define BIT60 0x1000000000000000ull
+#define BIT61 0x2000000000000000ull
+#define BIT62 0x4000000000000000ull
+#define BIT63 0x8000000000000000ull
+
+/// CPUID related registers
+#define AMD_CPUID_FMF 0x80000001ul // Family Model Features information
+#define AMD_CPUID_APICID_LPC_BID 0x00000001ul // Local APIC ID, Logical Processor Count, Brand ID
+#define AMD_CPUID_L2L3Cache_L2TLB 0x80000006ul
+#define CPUID_ASSOCIATIVITY_DISABLED 0x00
+#define CPUID_ASSOCIATIVITY_1_WAY 0x01
+#define CPUID_ASSOCIATIVITY_2_WAY 0x02
+#define CPUID_ASSOCIATIVITY_4_WAY 0x04
+#define CPUID_ASSOCIATIVITY_8_WAY 0x06
+#define CPUID_ASSOCIATIVITY_16_WAY 0x08
+#define CPUID_ASSOCIATIVITY_32_WAY 0x0A
+#define CPUID_ASSOCIATIVITY_48_WAY 0x0B
+#define CPUID_ASSOCIATIVITY_64_WAY 0x0C
+#define CPUID_ASSOCIATIVITY_96_WAY 0x0D
+#define CPUID_ASSOCIATIVITY_128_WAY 0x0E
+#define CPUID_ASSOCIATIVITY_FULLY 0x0F
+#define AMD_CPUID_TLB_L1Cache 0x80000005ul
+#define AMD_CPUID_APM 0x80000007ul
+#define LOCAL_APIC_ID 24
+#define LOGICAL_PROCESSOR_COUNT 16
+#define AMD_CPUID_ASIZE_PCCOUNT 0x80000008ul // Address Size, Physical Core Count
+
+/// CPU Logical ID Transfer
+typedef struct {
+ UINT32 RawId; ///< RawID
+ UINT64 LogicalId; ///< LogicalID
+} CPU_LOGICAL_ID_XLAT;
+
+/// Logical CPU ID Table
+typedef struct {
+ IN UINT32 Elements; ///< Number of Elements
+ IN CPU_LOGICAL_ID_XLAT *LogicalIdTable; ///< CPU Logical ID Transfer table Pointer
+} LOGICAL_ID_TABLE;
+
+// MSRs
+// ------------------------
+#define MCG_CTL_P 0x00000100ul // bit 8 for MCG_CTL_P under MSRR
+#define MSR_MCG_CAP 0x00000179ul
+#define MSR_MC0_CTL 0x00000400ul
+#define MSR_MC0_STATUS 0x00000401ul
+#define MSR_MC4_MISC 0x00000413ul
+#define MSR_MC5_STATUS 0x00000415ul
+
+#define MSR_APIC_BAR 0x0000001Bul
+
+#define CPUID_LONG_MODE_ADDR 0x80000008ul
+
+#define MSR_EXTENDED_FEATURE_EN 0xC0000080ul
+#define MSR_MC_MISC_L3_THRESHOLD 0xC0000409ul
+
+/// Patch Loader Register
+typedef struct {
+ UINT64 PatchBase:32; ///< Linear address of patch header address block
+ UINT64 SBZ:32; ///< Should be zero
+} PATCH_LOADER_MSR;
+
+#define MSR_SYS_CFG 0xC0010010ul // SYSCFG - F15 Shared
+#define MSR_TOM2 0xC001001Dul // TOP_MEM2 - F15 Shared
+#define MSR_MC0_CTL_MASK 0xC0010044ul // MC0 Control Mask
+#define MSR_MC1_CTL_MASK 0xC0010045ul // MC1 Control Mask
+#define MSR_MC2_CTL_MASK 0xC0010046ul // MC2 Control Mask
+#define MSR_MC4_CTL_MASK 0xC0010048ul // MC4 Control Mask
+
+#define MSR_CPUID_FEATS 0xC0011004ul // CPUID Features
+#define MSR_CPUID_EXT_FEATS 0xC0011005ul // CPUID Extended Features
+#define MSR_HWCR 0xC0010015ul
+#define MSR_NB_CFG 0xC001001Ful // NB Config
+#define MSR_CpuWdtCfg 0xC0010074ul // CPU Watchdog Timer
+#define ENABLE_CF8_EXT_CFG 0x00004000ul // [46]
+#define INIT_APIC_CPUID_LO 0x00400000ul // [54]
+#define MSR_LS_CFG 0xC0011020ul
+#define MSR_IC_CFG 0xC0011021ul // ICache Config - F15 Shared
+#define MSR_DC_CFG 0xC0011022ul
+#define MSR_ME_CFG 0xC0011029ul
+#define MSR_BU_CFG 0xC0011023ul
+#define MSR_CU_CFG 0xC0011023ul // F15 Shared
+#define MSR_DE_CFG 0xC0011029ul // F15 Shared
+#define MSR_BU_CFG2 0xC001102Aul
+#define MSR_CU_CFG2 0xC001102Aul // F15 Shared
+#define MSR_BU_CFG3 0xC001102Bul
+#define MSR_CU_CFG3 0xC001102Bul // F15 Shared
+#define MSR_IBS_OP_DATA3 0xC0011037ul
+#define MSR_L2I_CFG 0xC00110A0ul // F16 shared
+
+
+#define MSR_CPUID_NAME_STRING0 0xC0010030ul // First CPUID namestring register
+#define MSR_CPUID_NAME_STRING1 0xC0010031ul
+#define MSR_CPUID_NAME_STRING2 0XC0010032ul
+#define MSR_CPUID_NAME_STRING3 0xC0010033ul
+#define MSR_CPUID_NAME_STRING4 0xC0010034ul
+#define MSR_CPUID_NAME_STRING5 0xC0010035ul // Last CPUID namestring register
+#define MSR_MMIO_Cfg_Base 0xC0010058ul // MMIO Configuration Base Address Register
+#define MSR_BIST 0xC0010060ul // BIST Results register
+#define MSR_OSVW_ID_Length 0xC0010140ul
+#define MSR_OSVW_Status 0xC0010141ul
+#define MSR_NB_PERF_CTL0 0xC0010240ul
+#define MSR_NB_PERF_CTR0 0xC0010241ul
+#define MSR_NB_PERF_CTL1 0xC0010242ul
+#define MSR_NB_PERF_CTR1 0xC0010243ul
+#define MSR_NB_PERF_CTL2 0xC0010244ul
+#define MSR_NB_PERF_CTR2 0xC0010245ul
+#define MSR_NB_PERF_CTL3 0xC0010246ul
+#define MSR_NB_PERF_CTR3 0xC0010247ul
+#define MSR_PERF_CONTROL3 0xC0010003ul // Performance control register number 3
+#define MSR_PERF_COUNTER3 0xC0010007ul // Performance counter register number 3
+#define PERF_RESERVE_BIT_MASK 0x030FFFDFFFFFull // Mask of the Performance control Reserve bits
+#define PERF_CAR_CORRUPTION_EVENT 0x040040F0E2ul // Configure the controller to capture the
+ // CAR Corruption
+// FUNC_0 registers
+// ----------------
+#define HT_LINK_FREQ_OFFSET 8 // Link HT Frequency from capability base
+#define HT_LINK_CONTROL_REG_OFFSET 4
+#define HT_LINK_TYPE_REG_OFFSET 0x18
+#define HT_LINK_EXTENDED_FREQ 0x1C
+#define HT_LINK_HOST_CAP_MAX 0x20 // HT Host Capability offsets are less than its size.
+#define HT_CAPABILITIES_POINTER 0x34
+#define NODE_ID 0x60
+#define HT_INIT_CTRL 0x6C
+#define HT_INIT_CTRL_REQ_DIS 0x02 // [1] = ReqDis
+#define HT_INIT_COLD_RST_DET BIT4
+#define HT_INIT_BIOS_RST_DET_0 BIT5
+#define HT_INIT_BIOS_RST_DET_1 BIT9
+#define HT_INIT_BIOS_RST_DET_2 BIT10
+#define HT_INIT_BIOS_RST_DET BIT9 | BIT10
+#define HT_TRANS_CTRL 0x68
+#define HT_TRANS_CTRL_CPU1_EN 0x00000020ul // [5] = CPU1 Enable
+#define HT_LINK_CONTROL_0 0x84
+#define HT_LINK_FREQ_0 0x88 // Link HT Frequency
+#define EXTENDED_NODE_ID 0x160
+#define ECS_HT_TRANS_CTRL 0x168
+#define ECS_HT_TRANS_CTRL_CPU2_EN 0x00000001ul // [0] = CPU2 Enable
+#define ECS_HT_TRANS_CTRL_CPU3_EN 0x00000002ul // [1] = CPU3 Enable
+#define ECS_HT_TRANS_CTRL_CPU4_EN 0x00000004ul // [2] = CPU4 Enable
+#define ECS_HT_TRANS_CTRL_CPU5_EN 0x00000008ul // [3] = CPU5 Enable
+
+#define CORE_CTRL 0x1DC
+#define CORE_CTRL_CORE1_EN 0x00000002ul
+#define CORE_CTRL_CORE2_EN 0x00000004ul
+#define CORE_CTRL_CORE3_EN 0x00000008ul
+#define CORE_CTRL_CORE4_EN 0x00000010ul
+#define CORE_CTRL_CORE5_EN 0x00000020ul
+#define CORE_CTRL_CORE6_EN 0x00000040ul
+#define CORE_CTRL_CORE7_EN 0x00000080ul
+#define CORE_CTRL_CORE8_EN 0x00000100ul
+#define CORE_CTRL_CORE9_EN 0x00000200ul
+
+// FUNC_3 registers
+// ----------------
+#define HARDWARE_THERMAL_CTRL_REG 0x64
+#define SOFTWARE_THERMAL_CTRL_REG 0x68
+
+#define ACPI_PSC_0_REG 0x80 // ACPI Power State Control Registers
+#define ACPI_PSC_4_REG 0x84
+
+#define NB_CFG_HIGH_REG 0x8C
+#define POWER_CTRL_MISCELLANEOUS_REG 0xA0
+#define CLOCK_POWER_TIMING_CTRL2_REG 0xDC
+#define NORTH_BRIDGE_CAPABILITIES_REG 0xE8
+#define CPUID_FMR 0xFC // Family / Model registers
+#define DOWNCORE_CTRL 0x190 // Downcore Control Register
+
+#define LINK_TO_XCS_TOKEN_COUNT_REG_3X148 0x148
+#define REG_HT4_PHY_OFFSET_BASE_4X180 0x180
+#define REG_HT4_PHY_DATA_PORT_BASE_4X184 0x184
+
+#define HTPHY_OFFSET_MASK 0xE00001FFul
+#define HTPHY_WRITE_CMD 0x40000000ul
+#define HTPHY_IS_COMPLETE_MASK 0x80000000ul
+#define HTPHY_DIRECT_MAP 0x20000000ul
+#define HTPHY_DIRECT_OFFSET_MASK 0x6000FFFFul
+
+// FUNC_5 registers
+// ----------------
+#define COMPUTE_UNIT_STATUS 0x80
+#define NORTH_BRIDGE_CAPABILITIES_2_REG 0x84
+
+
+// Misc. defines.
+#define PCI_DEV_BASE 24
+
+#define CPU_STEPPING 0x0000000Ful
+#define CPU_MODEL 0x000000F0ul
+#define CPU_EMODEL 0x000F0000ul
+#define CPU_EFAMILY 0x00F00000ul
+#define CPU_FMS_MASK CPU_EFAMILY | CPU_EMODEL | CPU_MODEL | CPU_STEPPING
+
+#define HTPHY_SELECT 2
+#define PCI_SELECT 1
+#define MSR_SELECT 0
+
+#define LOGICAL_ID 1
+#define F_SCHEME 0
+#define DR_SCHEME 1
+#define GR_SCHEME 2
+
+#define DR_NO_STRING 0
+#define DR_SOCKET_C32 5
+#define DR_SOCKET_ASB2 4
+#define DR_SOCKET_G34 3
+#define DR_SOCKET_S1G3 2
+#define DR_SOCKET_S1G4 2
+#define DR_SOCKET_AM3 1
+#define DR_SOCKET_1207 0
+#define LN_SOCKET_FM1 2
+#define LN_SOCKET_FS1 1
+#define LN_SOCKET_FP1 0
+#define ON_SOCKET_FT1 0
+#define OR_SOCKET_AM3 1
+#define OR_SOCKET_G34 3
+#define OR_SOCKET_C32 5
+#define TN_SOCKET_FP2 0
+#define TN_SOCKET_FS1 1
+#define TN_SOCKET_FM2 2
+#define KB_SOCKET_FT3 0
+#define SOCKET_IGNORE 0xF
+
+#define LAPIC_BASE_ADDR_MASK 0x0000FFFFFFFFF000ull
+#define APIC_EXT_BRDCST_MASK 0x000E0000ul
+#define APIC_ENABLE_BIT 0x00000800ul
+#ifndef LOCAL_APIC_ADDR
+#define LOCAL_APIC_ADDR 0xFEE00000ul
+#endif
+#define INT_CMD_REG_LO 0x300
+#define INT_CMD_REG_HI 0x310
+#define REMOTE_MSG_REG 0x380
+#define REMOTE_READ_REG 0xC0
+#define APIC_ID_REG 0x20
+#define APIC20_ApicId 24
+
+#define MAX_CORE_ID_SIZE 8
+#define MAX_CORE_ID_MASK ((1 << MAX_CORE_ID_SIZE) - 1)
+
+/*-------------------------
+ * Default definitions
+ *-------------------------
+ */
+#define DOWNCORE_MASK_SINGLE 0xFFFFFFFEul
+#define DOWNCORE_MASK_DUAL 0xFFFFFFFCul
+#define DOWNCORE_MASK_TRI 0xFFFFFFF8ul
+#define DOWNCORE_MASK_FOUR 0xFFFFFFF0ul
+#define DOWNCORE_MASK_FIVE 0xFFFFFFE0ul
+#define DOWNCORE_MASK_SIX 0xFFFFFFC0ul
+#define DOWNCORE_MASK_SEVEN 0xFFFFFF80ul
+#define DOWNCORE_MASK_EIGHT 0xFFFFFF00ul
+#define DOWNCORE_MASK_TEN 0xFFFFFC00ul
+#define DOWNCORE_MASK_TWELVE 0xFFFFF000ul
+#define DOWNCORE_MASK_FOURTEEN 0xFFFFC000ul
+#define DOWNCORE_MASK_DUAL_COMPUTE_UNIT 0xFFFFFFFAul
+#define DOWNCORE_MASK_TRI_COMPUTE_UNIT 0xFFFFFFEAul
+#define DOWNCORE_MASK_FOUR_COMPUTE_UNIT 0xFFFFFFAAul
+#define DOWNCORE_MASK_FIVE_COMPUTE_UNIT 0xFFFFFEAAul
+#define DOWNCORE_MASK_SIX_COMPUTE_UNIT 0xFFFFFAAAul
+#define DOWNCORE_MASK_SEVEN_COMPUTE_UNIT 0xFFFFEAAAul
+#define DOWNCORE_MASK_EIGHT_COMPUTE_UNIT 0xFFFFAAAAul
+
+#define DELIVERY_STATUS BIT13
+#define REMOTE_READ_STAT_MASK 0x00030000ul
+#define REMOTE_DELIVERY_PENDING 0x00010000ul
+#define REMOTE_DELIVERY_DONE 0x00020000ul
+
+/*
+ * --------------------------------------------------------------------------------------
+ *
+ * D E F I N E S / T Y P E D E F S / S T R U C T U R E S
+ *
+ * --------------------------------------------------------------------------------------
+ */
+
+/// CpuEarly param type
+typedef struct {
+ IN UINT8 MemInitPState; ///< Pstate value during memory initial
+ IN PLATFORM_CONFIGURATION PlatformConfig; ///< Runtime configurable user options
+} AMD_CPU_EARLY_PARAMS;
+
+/// Enum - Will be used to access each structure
+/// related to each CPU family
+typedef enum {
+ REVF, ///< NPT, RevF
+ REVG, ///< NPT, RevG
+ DEERHOUND, ///< Family 10h, Deerhound
+ GRIFFIN ///< Family 11h, Griffin
+} CPU_FAMILY;
+
+/// CPUID
+typedef enum {
+ REG_EAX, ///< EAX
+ REG_EBX, ///< EBX
+ REG_ECX, ///< ECX
+ REG_EDX ///< EDX
+} CPUID_REG;
+
+#endif // _CPU_REGISTERS_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuServices.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuServices.h
new file mode 100644
index 0000000..7e68e3f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuServices.h
@@ -0,0 +1,342 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Services
+ *
+ * Related to the General Services API's, but for the CPU component.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CPU_SERVICES_H_
+#define _CPU_SERVICES_H_
+
+#include "Topology.h"
+
+/*----------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+ /// WARM RESET STATE_BITS
+#define WR_STATE_COLD 00
+#define WR_STATE_RESET 01
+#define WR_STATE_EARLY 02
+#define WR_STATE_POST 03
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *----------------------------------------------------------------------------------------
+ */
+
+/**
+ * The role of primary core for each compute unit can be relative to the cores' launch order.
+ *
+ * One core of a compute unit is always given the role as primary. In different feature algorithms
+ * the core performing the primary core role can be designated relative to compute order. In most cases,
+ * the primary core is the first core of a compute unit to execute. However, in some cases the primary core
+ * role is associated with the last core to execute.
+ *
+ * If the launch order is strictly ascending, then first core is the lowest number and last core is highest.
+ * But if the launch order is not ascending, the first and last core follow the launch order, not the numbering order.
+ *
+ * Note that for compute units with only one core (AllCoresMapping), that core is primary for both orderings.
+ * (This includes processors without hardware compute units.)
+ *
+ */
+typedef enum {
+ FirstCoreIsComputeUnitPrimary, ///< the primary core role associates with the first core.
+ LastCoreIsComputeUnitPrimary, ///< the primary core role associates with the last core.
+ MaxComputeUnitPrimarySelector, ///< limit check.
+} COMPUTE_UNIT_PRIMARY_SELECTOR;
+
+/**
+ * The supported Core to Compute unit mappings.
+ */
+typedef enum {
+ AllCoresMapping, ///< All Cores are primary cores
+ EvenCoresMapping, ///< Compute units are even/odd core pairs.
+ TripleCoresMapping, ///< Compute units has three cores enabled.
+ QuadCoresMapping, ///< Compute units has four cores enabled.
+ BitMapMapping, ///< Currently not supported by any family, arbitrary core
+ ///< to compute unit mapping.
+ MaxComputeUnitMapping ///< Not a mapping, use for limit check.
+} COMPUTE_UNIT_MAPPING;
+
+/**
+ * Compute unit status register.
+ */
+
+/**
+ * Compute Unit Map entry.
+ * Provide for interpreting the core pairing for the processor's compute units.
+ *
+ * HT_LIST_TERMINAL as an Enabled value means the end of a list of map structs.
+ * Zero as an Enabled value implies Compute Units are not supported by the processor
+ * and the mapping is assumed to be AllCoresMapping.
+ *
+ */
+typedef struct {
+ UINT8 Enabled; ///< The value of the Enabled Compute Units
+ UINT8 DualCore; ///< The value of the Dual Core Compute Units
+ UINT8 TripleCore; ///< the value of the Triple Core Compute Units
+ UINT8 QuadCore; ///< the value of the Quad Core Compute Units
+ COMPUTE_UNIT_MAPPING Mapping; ///< When the processor module matches these values, use this mapping method.
+} COMPUTE_UNIT_MAP;
+
+//----------------------------------------------------------------------------
+// CPU SYSTEM INFO TYPEDEFS, STRUCTURES, ENUMS
+//
+//----------------------------------------------------------------------------
+/// SYSTEM INFO
+typedef struct _SYSTEM_INFO {
+ UINT32 TotalNumberOfSockets; ///< Total Number of Sockets
+ UINT32 TotalNumberOfCores; ///< Total Number Of Cores
+ UINT32 CurrentSocketNum; ///< Current Socket Number
+ UINT32 CurrentCoreNum; ///< Current Core Number
+ UINT32 CurrentCoreApicId; ///< Current Core Apic ID
+ UINT32 CurrentLogicalCpuId; ///< Current Logical CPU ID
+} SYSTEM_INFO;
+
+/// WARM_RESET_REQUEST
+typedef struct _WARM_RESET_REQUEST {
+ UINT8 RequestBit:1; ///< Request Bit
+ UINT8 StateBits:2; ///< State Bits
+ UINT8 PostStage:2; ///< Post Stage
+ UINT8 Reserved:(8 - 5); ///< Reserved
+} WARM_RESET_REQUEST;
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GetCurrentNodeNum (
+ OUT UINT32 *Node,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Get the current Platform's number of Sockets, regardless of how many are populated.
+ *
+ */
+UINT32
+GetPlatformNumberOfSockets ( VOID );
+
+/**
+ * Get the number of Modules to check presence in each Processor.
+ *
+ */
+UINT32
+GetPlatformNumberOfModules ( VOID );
+
+BOOLEAN
+IsProcessorPresent (
+ IN UINT32 Socket,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * For a specific Node, get its Socket and Module ids.
+ *
+ */
+BOOLEAN
+GetSocketModuleOfNode (
+ IN UINT32 Node,
+ OUT UINT32 *Socket,
+ OUT UINT32 *Module,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Get the current core's Processor APIC Index.
+ */
+UINT32
+GetProcessorApicIndex (
+ IN UINT32 Node,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Provide the number of installed processors (not Nodes! and not Sockets!)
+ */
+UINT32
+GetNumberOfProcessors (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GetActiveCoresInCurrentSocket (
+ OUT UINT32 *CoreCount,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GetActiveCoresInGivenSocket (
+ IN UINT32 Socket,
+ OUT UINT32 *CoreCount,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINTN
+GetActiveCoresInCurrentModule (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINTN
+GetNumberOfCompUnitsInCurrentModule (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GetGivenModuleCoreRange (
+ IN UINT32 Socket,
+ IN UINT32 Module,
+ OUT UINT32 *LowCore,
+ OUT UINT32 *HighCore,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GetCurrentCore (
+ OUT UINT32 *Core,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GetCurrentNodeAndCore (
+ OUT UINT32 *Node,
+ OUT UINT32 *Core,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+IsCurrentCorePrimary (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GetApMailbox (
+ OUT UINT32 *ApMailboxInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+CacheApMailbox (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+CacheBspMailbox (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AP_MAILBOXES *ApMailboxes,
+ IN UINT8 NumberOfNodes
+ );
+
+UINTN
+GetSystemDegree (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GetNodeId (
+ IN UINT32 SocketId,
+ IN UINT32 ModuleId,
+ OUT UINT8 *NodeId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+WaitMicroseconds (
+ IN UINT32 Microseconds,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Get the compute unit mapping algorithm.
+ */
+COMPUTE_UNIT_MAPPING
+GetComputeUnitMapping (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Does the current core have the role of primary core for the compute unit?
+ */
+BOOLEAN
+IsCoreComputeUnitPrimary (
+ IN COMPUTE_UNIT_PRIMARY_SELECTOR Selector,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+SetWarmResetFlag (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN WARM_RESET_REQUEST *Request
+ );
+
+VOID
+GetWarmResetFlag (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT WARM_RESET_REQUEST *Request
+ );
+
+BOOLEAN
+IsWarmReset (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+CheckBistStatus (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+SetWarmResetAtEarly (
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+);
+
+#ifndef CPU_DEADLOOP
+ #define CPU_DEADLOOP() { volatile UINTN __i; __i = 1; while (__i); }
+#endif
+
+#endif // _CPU_SERVICES_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuWarmReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuWarmReset.c
new file mode 100644
index 0000000..6aa5a76
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/cpuWarmReset.c
@@ -0,0 +1,234 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD CPU Warm Reset Implementation.
+ *
+ * Implement Warm Reset Interface.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_CPUWARMRESET_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will set the CPU register warm reset bits.
+ *
+ * Note: This function will be called by UEFI BIOS's
+ * The UEFI wrapper code should register this function, to be called back later point
+ * in time, before the wrapper code does warm reset.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ * @param[in] Request Indicate warm reset status
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+SetWarmResetFlag (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN WARM_RESET_REQUEST *Request
+ )
+{
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ FamilySpecificServices = NULL;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->SetWarmResetFlag (FamilySpecificServices, StdHeader, Request);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will get the CPU register warm reset bits.
+ *
+ * Note: This function will be called by UEFI BIOS's
+ * The UEFI wrapper code should register this function, to be called back later point
+ * in time, before the wrapper code does warm reset.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ * @param[out] Request Indicate warm reset status
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+GetWarmResetFlag (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT WARM_RESET_REQUEST *Request
+ )
+{
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ FamilySpecificServices = NULL;
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->GetWarmResetFlag (FamilySpecificServices, StdHeader, Request);
+
+ switch (StdHeader->Func) {
+ case AMD_INIT_RESET:
+ Request->PostStage = (UINT8) WR_STATE_RESET;
+ break;
+ case AMD_INIT_EARLY:
+ Request->PostStage = (UINT8) WR_STATE_EARLY;
+ break;
+ case AMD_INIT_POST:
+ // Fall through to default case
+ default:
+ Request->PostStage = (UINT8) WR_STATE_POST;
+ break;
+ }
+}
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S - (AGESA ONLY)
+ *----------------------------------------------------------------------------------------
+ */
+
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Is this boot a warm reset?
+ *
+ * This function reads the CPU register warm reset bit that is preserved after a warm reset.
+ * Which in fact gets set before issuing warm reset. We just use the BSP's register always.
+ *
+ * @param[in] StdHeader Config handle for library and services
+ *
+ * @retval TRUE Warm Reset
+ * @retval FALSE Not Warm Reset
+ *
+ */
+BOOLEAN
+IsWarmReset (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 PostStage;
+ WARM_RESET_REQUEST Request;
+ BOOLEAN WarmReset;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ FamilySpecificServices = NULL;
+
+ switch (StdHeader->Func) {
+ case AMD_INIT_RESET:
+ PostStage = WR_STATE_RESET;
+ break;
+ case AMD_INIT_EARLY:
+ PostStage = WR_STATE_EARLY;
+ break;
+ case AMD_INIT_POST:
+ default:
+ PostStage = WR_STATE_POST;
+ break;
+ }
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->GetWarmResetFlag (FamilySpecificServices, StdHeader, &Request);
+
+ if (Request.StateBits >= PostStage) {
+ WarmReset = TRUE;
+ } else {
+ WarmReset = FALSE;
+ }
+
+ return WarmReset;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function will set the CPU register warm reset bits at AmdInitEarly if it is
+ * currently in cold boot. To request for a warm reset, set the RequestBit to TRUE
+ * and the StateBits to (current poststage - 1)
+ *
+ * @param[in] Data The table data value (unused in this routine)
+ * @param[in] StdHeader Config handle for library and services
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+VOID
+SetWarmResetAtEarly (
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ WARM_RESET_REQUEST Request;
+
+ if (!IsWarmReset (StdHeader)) {
+ GetWarmResetFlag (StdHeader, &Request);
+
+ Request.RequestBit = TRUE;
+ Request.StateBits = (Request.PostStage - 1);
+
+ SetWarmResetFlag (StdHeader, &Request);
+ }
+}
+
+/*----------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/heapManager.c b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/heapManager.c
new file mode 100644
index 0000000..42a6afa
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/heapManager.c
@@ -0,0 +1,889 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Heap Manager and Heap Allocation APIs, and related functions.
+ *
+ * Contains code that initialize, maintain, and allocate the heap space.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "heapManager.h"
+#include "cpuCacheInit.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_CPU_HEAPMANAGER_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT64
+STATIC
+HeapGetCurrentBase (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+DeleteFreeSpaceNode (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT32 OffsetOfDeletedNode
+ );
+
+VOID
+STATIC
+InsertFreeSpaceNode (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT32 OffsetOfInsertNode
+ );
+
+/*----------------------------------------------------------------------------------------
+ * P U B L I C F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT64
+HeapGetBaseAddressInTempMem (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function initializes the heap for each CPU core.
+ *
+ * Check for already initialized. If not, determine offset of local heap in CAS and
+ * setup initial heap markers and bookkeeping status. Initialize a couple heap items
+ * all cores need, for convenience. Currently these are caching the AP mailbox info and
+ * an initial event log.
+ *
+ * @param[in] StdHeader Handle of Header for calling lib functions and services.
+ *
+ * @retval AGESA_SUCCESS This core's heap is initialized
+ * @retval AGESA_FATAL This core's heap cannot be initialized due to any reasons below:
+ * - current processor family cannot be identified.
+ *
+ */
+AGESA_STATUS
+HeapManagerInit (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ // First Time Initialization
+ // Note: First 16 bytes of buffer is reserved for Heap Manager use
+ UINT16 HeapAlreadyInitSizeDword;
+ UINT32 HeapAlreadyRead;
+ UINT8 L2LineSize;
+ UINT8 *HeapBufferPtr;
+ UINT8 *HeapInitPtr;
+ UINT32 *HeapDataPtr;
+ UINT64 MsrData;
+ UINT64 MsrMask;
+ UINT8 Ignored;
+ CPUID_DATA CpuId;
+ BUFFER_NODE *FreeSpaceNode;
+ CACHE_INFO *CacheInfoPtr;
+ AGESA_STATUS IgnoredSts;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ CPU_LOGICAL_ID CpuFamilyRevision;
+
+ // Check whether this is a known processor family.
+ GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader);
+ if ((CpuFamilyRevision.Family == 0) && (CpuFamilyRevision.Revision == 0)) {
+ IDS_ERROR_TRAP;
+ return AGESA_FATAL;
+ }
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &Ignored, StdHeader);
+ HeapBufferPtr = (UINT8 *)(UINT32) StdHeader->HeapBasePtr;
+
+ // Check whether the heap manager is already initialized
+ LibAmdMsrRead (AMD_MTRR_VARIABLE_HEAP_MASK, &MsrData, StdHeader);
+ if (MsrData == (CacheInfoPtr->VariableMtrrMask & AMD_HEAP_MTRR_MASK)) {
+ LibAmdMsrRead (AMD_MTRR_VARIABLE_HEAP_BASE, &MsrData, StdHeader);
+ if ((MsrData & CacheInfoPtr->HeapBaseMask) == ((UINT64) (UINTN) HeapBufferPtr & CacheInfoPtr->HeapBaseMask)) {
+ if (((HEAP_MANAGER *) HeapBufferPtr)->Signature == HEAP_SIGNATURE_VALID) {
+ // This is not a bug, there are multiple premem basic entry points,
+ // and each will call heap init to make sure create struct will succeed.
+ // If that is later deemed a problem, there needs to be a reasonable test
+ // for the calling code to make to determine if it needs to init heap or not.
+ // In the mean time, add this to the event log
+ PutEventLog (AGESA_SUCCESS,
+ CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED,
+ 0, 0, 0, 0, StdHeader);
+ return AGESA_SUCCESS;
+ }
+ }
+ }
+
+ // Set variable MTRR base and mask
+ MsrData = ((UINT64) (UINTN) HeapBufferPtr & CacheInfoPtr->HeapBaseMask);
+ MsrMask = CacheInfoPtr->VariableMtrrHeapMask & AMD_HEAP_MTRR_MASK;
+
+ MsrData |= 0x06;
+ LibAmdMsrWrite (AMD_MTRR_VARIABLE_HEAP_BASE, &MsrData, StdHeader);
+ LibAmdMsrWrite (AMD_MTRR_VARIABLE_HEAP_MASK, &MsrMask, StdHeader);
+
+ // Set top of memory to a temp value
+ MsrData = (UINT64) (AMD_TEMP_TOM);
+ LibAmdMsrWrite (TOP_MEM, &MsrData, StdHeader);
+
+ // Enable variable MTTRs
+ LibAmdMsrRead (SYS_CFG, &MsrData, StdHeader);
+ MsrData |= AMD_VAR_MTRR_ENABLE_BIT;
+ LibAmdMsrWrite (SYS_CFG, &MsrData, StdHeader);
+
+ // Initialize Heap Space
+ // BIOS may store to a line only after it has been allocated by a load
+ LibAmdCpuidRead (AMD_CPUID_L2L3Cache_L2TLB, &CpuId, StdHeader);
+ L2LineSize = (UINT8) (CpuId.ECX_Reg);
+ HeapInitPtr = HeapBufferPtr ;
+ for (HeapAlreadyRead = 0; HeapAlreadyRead < AMD_HEAP_SIZE_PER_CORE;
+ (HeapAlreadyRead = HeapAlreadyRead + L2LineSize)) {
+ Ignored = *HeapInitPtr;
+ HeapInitPtr += L2LineSize;
+ }
+
+ HeapDataPtr = (UINT32 *) HeapBufferPtr;
+ for (HeapAlreadyInitSizeDword = 0; HeapAlreadyInitSizeDword < AMD_HEAP_SIZE_DWORD_PER_CORE; HeapAlreadyInitSizeDword++) {
+ *HeapDataPtr = 0;
+ HeapDataPtr++;
+ }
+
+ // Note: We are reserving the first 16 bytes for Heap Manager use
+ // UsedSize indicates the size of heap spaced is used for HEAP_MANAGER, BUFFER_NODE,
+ // Pad for 16-byte alignment, buffer data, and IDS SENTINEL.
+ // FirstActiveBufferOffset is initalized as invalid heap offset, AMD_HEAP_INVALID_HEAP_OFFSET.
+ // FirstFreeSpaceOffset is initalized as the byte right after HEAP_MANAGER header.
+ // Then we set Signature of HEAP_MANAGER header as valid, HEAP_SIGNATURE_VALID.
+ ((HEAP_MANAGER*) HeapBufferPtr)->UsedSize = sizeof (HEAP_MANAGER);
+ ((HEAP_MANAGER*) HeapBufferPtr)->FirstActiveBufferOffset = AMD_HEAP_INVALID_HEAP_OFFSET;
+ ((HEAP_MANAGER*) HeapBufferPtr)->FirstFreeSpaceOffset = sizeof (HEAP_MANAGER);
+ ((HEAP_MANAGER*) HeapBufferPtr)->Signature = HEAP_SIGNATURE_VALID;
+ // Create free space link
+ FreeSpaceNode = (BUFFER_NODE *) (HeapBufferPtr + sizeof (HEAP_MANAGER));
+ FreeSpaceNode->BufferSize = AMD_HEAP_SIZE_PER_CORE - sizeof (HEAP_MANAGER) - sizeof (BUFFER_NODE);
+ FreeSpaceNode->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+
+ StdHeader->HeapStatus = HEAP_LOCAL_CACHE;
+ if (!IsBsp (StdHeader, &IgnoredSts)) {
+ // The BSP's hardware mailbox has not been initialized, so only APs
+ // can do this at this point.
+ CacheApMailbox (StdHeader);
+ }
+ EventLogInitialization (StdHeader);
+ return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Allocates space for a new buffer in the heap
+ *
+ * This function will allocate new buffer either by using internal 'AGESA' heapmanager
+ * or by using externa (IBV) heapmanager. This function will also determine if whether or not
+ * there is enough space for the new structure. If so, it will zero out the buffer,
+ * and return a pointer to the region.
+ *
+ * @param[in,out] AllocateHeapParams structure pointer containing the size of the
+ * desired new region, its handle, and the
+ * return pointer.
+ * @param[in,out] StdHeader Config handle for library and services.
+ *
+ * @retval AGESA_SUCCESS No error
+ * @retval AGESA_BOUNDS_CHK Handle already exists, or not enough
+ * free space
+ * @retval AGESA_UNSUPPORTED Do not support this kind of heap allocation
+ * @retval AGESA_ERROR Heap is invaild
+ *
+ */
+AGESA_STATUS
+HeapAllocateBuffer (
+ IN OUT ALLOCATE_HEAP_PARAMS *AllocateHeapParams,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *BaseAddress;
+ UINT8 AlignTo16Byte;
+ UINT8 CalloutFcnData;
+ UINT32 RemainSize;
+ UINT32 OffsetOfSplitNode;
+ UINT32 OffsetOfNode;
+ HEAP_MANAGER *HeapManager;
+ BUFFER_NODE *FreeSpaceNode;
+ BUFFER_NODE *SplitFreeSpaceNode;
+ BUFFER_NODE *CurrentBufferNode;
+ BUFFER_NODE *NewBufferNode;
+ AGESA_BUFFER_PARAMS AgesaBuffer;
+
+ ASSERT (StdHeader != NULL);
+ if (AllocateHeapParams->Persist == HEAP_RUNTIME_SYSTEM_MEM) {
+ ASSERT (StdHeader->HeapStatus == HEAP_SYSTEM_MEM);
+ if (StdHeader->HeapStatus != HEAP_SYSTEM_MEM) {
+ return AGESA_UNSUPPORTED;
+ }
+ }
+
+ // At this stage we will decide to either use external (IBV) heap manger
+ // or internal (AGESA) heap manager.
+
+ // If (HeapStatus == HEAP_SYSTEM_MEM), then use the call function to call
+ // external heap manager
+ if (StdHeader->HeapStatus == HEAP_SYSTEM_MEM) {
+ AgesaBuffer.StdHeader = *StdHeader;
+ AgesaBuffer.BufferHandle = AllocateHeapParams->BufferHandle;
+ AgesaBuffer.BufferLength = AllocateHeapParams->RequestedBufferSize;
+
+ if (AllocateHeapParams->Persist == HEAP_RUNTIME_SYSTEM_MEM) {
+ CalloutFcnData = HEAP_CALLOUT_RUNTIME;
+ } else {
+ CalloutFcnData = HEAP_CALLOUT_BOOTTIME;
+ }
+ AGESA_TESTPOINT (TpIfBeforeAllocateHeapBuffer, StdHeader);
+ if (AgesaAllocateBuffer (CalloutFcnData, &AgesaBuffer) != AGESA_SUCCESS) {
+ AllocateHeapParams->BufferPtr = NULL;
+ return AGESA_ERROR;
+ }
+ AGESA_TESTPOINT (TpIfAfterAllocateHeapBuffer, StdHeader);
+
+ AllocateHeapParams->BufferPtr = (UINT8 *) (AgesaBuffer.BufferPointer);
+ return AGESA_SUCCESS;
+ }
+
+ // If (StdHeader->HeapStatus != HEAP_SYSTEM_MEM), then allocated buffer
+ // using following AGESA Heap Manager code.
+
+ // Buffer pointer is NULL unless we return a buffer.
+ AlignTo16Byte = 0;
+ AllocateHeapParams->BufferPtr = NULL;
+ AllocateHeapParams->RequestedBufferSize += NUM_OF_SENTINEL * SIZE_OF_SENTINEL;
+
+ // Get base address
+ BaseAddress = (UINT8 *) (UINTN) StdHeader->HeapBasePtr;
+ HeapManager = (HEAP_MANAGER *) BaseAddress;
+
+ // Check Heap database is valid
+ if ((BaseAddress == NULL) || (HeapManager->Signature != HEAP_SIGNATURE_VALID)) {
+ // The base address in StdHeader is incorrect, get base address by itself
+ BaseAddress = (UINT8 *)(UINT32) HeapGetBaseAddress (StdHeader);
+ HeapManager = (HEAP_MANAGER *) BaseAddress;
+ if ((BaseAddress == NULL) || (HeapManager->Signature != HEAP_SIGNATURE_VALID)) {
+ // Heap is not available, ASSERT here
+ ASSERT (FALSE);
+ return AGESA_ERROR;
+ }
+ StdHeader->HeapBasePtr = (UINT64)(UINT32) BaseAddress;
+ }
+
+ // Allocate
+ CurrentBufferNode = (BUFFER_NODE *) (BaseAddress + sizeof (HEAP_MANAGER));
+ // If there already has been a heap with the incoming BufferHandle, we return AGESA_BOUNDS_CHK.
+ if (HeapManager->FirstActiveBufferOffset != AMD_HEAP_INVALID_HEAP_OFFSET) {
+ CurrentBufferNode = (BUFFER_NODE *) (BaseAddress + HeapManager->FirstActiveBufferOffset);
+ while (CurrentBufferNode->OffsetOfNextNode != AMD_HEAP_INVALID_HEAP_OFFSET) {
+ if (CurrentBufferNode->BufferHandle == AllocateHeapParams->BufferHandle) {
+ PutEventLog (AGESA_BOUNDS_CHK,
+ CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED,
+ AllocateHeapParams->BufferHandle, 0, 0, 0, StdHeader);
+ return AGESA_BOUNDS_CHK;
+ } else {
+ CurrentBufferNode = (BUFFER_NODE *) (BaseAddress + CurrentBufferNode->OffsetOfNextNode);
+ }
+ }
+ if (CurrentBufferNode->BufferHandle == AllocateHeapParams->BufferHandle) {
+ PutEventLog (AGESA_BOUNDS_CHK,
+ CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED,
+ AllocateHeapParams->BufferHandle, 0, 0, 0, StdHeader);
+ return AGESA_BOUNDS_CHK;
+ }
+ }
+
+ // Find the buffer size that first matches the requested buffer size (i.e. the first free buffer of greater size).
+ OffsetOfNode = HeapManager->FirstFreeSpaceOffset;
+ FreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfNode);
+ while (OffsetOfNode != AMD_HEAP_INVALID_HEAP_OFFSET) {
+ AlignTo16Byte = (UINT8) ((0x10 - (((UINTN) (VOID *) FreeSpaceNode + sizeof (BUFFER_NODE) + SIZE_OF_SENTINEL) & 0xF)) & 0xF);
+ AllocateHeapParams->RequestedBufferSize = (UINT32) (AllocateHeapParams->RequestedBufferSize + AlignTo16Byte);
+ if (FreeSpaceNode->BufferSize >= AllocateHeapParams->RequestedBufferSize) {
+ break;
+ }
+ AllocateHeapParams->RequestedBufferSize = (UINT32) (AllocateHeapParams->RequestedBufferSize - AlignTo16Byte);
+ OffsetOfNode = FreeSpaceNode->OffsetOfNextNode;
+ FreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfNode);
+ }
+ if (OffsetOfNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+ // We don't find any free space buffer that matches the requested buffer size.
+ PutEventLog (AGESA_BOUNDS_CHK,
+ CPU_ERROR_HEAP_IS_FULL,
+ AllocateHeapParams->BufferHandle, 0, 0, 0, StdHeader);
+ return AGESA_BOUNDS_CHK;
+ } else {
+ // We find one matched free space buffer.
+ DeleteFreeSpaceNode (StdHeader, OffsetOfNode);
+ NewBufferNode = FreeSpaceNode;
+ // Add new buffer node to the buffer chain
+ if (HeapManager->FirstActiveBufferOffset == AMD_HEAP_INVALID_HEAP_OFFSET) {
+ HeapManager->FirstActiveBufferOffset = sizeof (HEAP_MANAGER);
+ } else {
+ CurrentBufferNode->OffsetOfNextNode = OffsetOfNode;
+ }
+ // New buffer size
+ RemainSize = FreeSpaceNode->BufferSize - AllocateHeapParams->RequestedBufferSize;
+ if (RemainSize > sizeof (BUFFER_NODE)) {
+ NewBufferNode->BufferSize = AllocateHeapParams->RequestedBufferSize;
+ OffsetOfSplitNode = OffsetOfNode + sizeof (BUFFER_NODE) + NewBufferNode->BufferSize;
+ SplitFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfSplitNode);
+ SplitFreeSpaceNode->BufferSize = RemainSize - sizeof (BUFFER_NODE);
+ InsertFreeSpaceNode (StdHeader, OffsetOfSplitNode);
+ } else {
+ // Remain size is less than BUFFER_NODE, we use whole size instead of requested size.
+ NewBufferNode->BufferSize = FreeSpaceNode->BufferSize;
+ }
+ }
+
+ // Initialize BUFFER_NODE structure of NewBufferNode
+ NewBufferNode->BufferHandle = AllocateHeapParams->BufferHandle;
+ if ((AllocateHeapParams->Persist == HEAP_TEMP_MEM) || (AllocateHeapParams->Persist == HEAP_SYSTEM_MEM)) {
+ NewBufferNode->Persist = AllocateHeapParams->Persist;
+ } else {
+ NewBufferNode->Persist = HEAP_LOCAL_CACHE;
+ }
+ NewBufferNode->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+ NewBufferNode->PadSize = AlignTo16Byte;
+
+ // Clear to 0x00
+ LibAmdMemFill ((VOID *) ((UINT8 *) NewBufferNode + sizeof (BUFFER_NODE)), 0x00, NewBufferNode->BufferSize, StdHeader);
+
+ // Debug feature
+ SET_SENTINEL_BEFORE (NewBufferNode, AlignTo16Byte);
+ SET_SENTINEL_AFTER (NewBufferNode);
+
+ // Update global variables
+ HeapManager->UsedSize += NewBufferNode->BufferSize + sizeof (BUFFER_NODE);
+
+ // Now fill in the incoming structure
+ AllocateHeapParams->BufferPtr = (UINT8 *) ((UINT8 *) NewBufferNode + sizeof (BUFFER_NODE) + SIZE_OF_SENTINEL + AlignTo16Byte);
+ AllocateHeapParams->RequestedBufferSize -= (NUM_OF_SENTINEL * SIZE_OF_SENTINEL + AlignTo16Byte);
+
+ return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Deallocates a previously allocated buffer in the heap
+ *
+ * This function will deallocate buffer either by using internal 'AGESA' heapmanager
+ * or by using externa (IBV) heapmanager.
+ *
+ * @param[in] BufferHandle Handle of the buffer to free.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ * @retval AGESA_SUCCESS No error
+ * @retval AGESA_BOUNDS_CHK Handle does not exist on the heap
+ *
+ */
+AGESA_STATUS
+HeapDeallocateBuffer (
+ IN UINT32 BufferHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *BaseAddress;
+ UINT32 NodeSize;
+ UINT32 OffsetOfFreeSpaceNode;
+ UINT32 OffsetOfPreviousNode;
+ UINT32 OffsetOfCurrentNode;
+ BOOLEAN HeapLocateFlag;
+ HEAP_MANAGER *HeapManager;
+ BUFFER_NODE *CurrentNode;
+ BUFFER_NODE *PreviousNode;
+ BUFFER_NODE *FreeSpaceNode;
+ AGESA_BUFFER_PARAMS AgesaBuffer;
+
+ ASSERT (StdHeader != NULL);
+
+ HeapLocateFlag = TRUE;
+ BaseAddress = (UINT8 *) (UINTN) StdHeader->HeapBasePtr;
+ HeapManager = (HEAP_MANAGER *) BaseAddress;
+
+ // Check Heap database is valid
+ if ((BaseAddress == NULL) || (HeapManager->Signature != HEAP_SIGNATURE_VALID)) {
+ // The base address in StdHeader is incorrect, get base address by itself
+ BaseAddress = (UINT8 *)(UINT32) HeapGetBaseAddress (StdHeader);
+ HeapManager = (HEAP_MANAGER *) BaseAddress;
+ if ((BaseAddress == NULL) || (HeapManager->Signature != HEAP_SIGNATURE_VALID)) {
+ // Heap is not available, ASSERT here
+ ASSERT (FALSE);
+ return AGESA_ERROR;
+ }
+ StdHeader->HeapBasePtr = (UINT64)(UINT32) BaseAddress;
+ }
+
+ OffsetOfPreviousNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+ OffsetOfCurrentNode = HeapManager->FirstActiveBufferOffset;
+ CurrentNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+
+ // Locate heap
+ if ((BaseAddress != NULL) && (HeapManager->Signature == HEAP_SIGNATURE_VALID)) {
+ if (OffsetOfCurrentNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+ HeapLocateFlag = FALSE;
+ } else {
+ while (CurrentNode->BufferHandle != BufferHandle) {
+ if (CurrentNode->OffsetOfNextNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+ HeapLocateFlag = FALSE;
+ break;
+ } else {
+ OffsetOfPreviousNode = OffsetOfCurrentNode;
+ OffsetOfCurrentNode = CurrentNode->OffsetOfNextNode;
+ CurrentNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+ }
+ }
+ }
+ } else {
+ HeapLocateFlag = FALSE;
+ }
+
+ if (HeapLocateFlag == TRUE) {
+ // CurrentNode points to the buffer which wanted to be deallocated.
+ // Remove deallocated heap from active buffer chain.
+ if (OffsetOfPreviousNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+ HeapManager->FirstActiveBufferOffset = CurrentNode->OffsetOfNextNode;
+ } else {
+ PreviousNode = (BUFFER_NODE *) (BaseAddress + OffsetOfPreviousNode);
+ PreviousNode->OffsetOfNextNode = CurrentNode->OffsetOfNextNode;
+ }
+ // Now, CurrentNode become a free space node.
+ HeapManager->UsedSize -= CurrentNode->BufferSize + sizeof (BUFFER_NODE);
+ // Loop free space chain to see if any free space node is just before/after CurrentNode, then merge them.
+ OffsetOfFreeSpaceNode = HeapManager->FirstFreeSpaceOffset;
+ FreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfFreeSpaceNode);
+ while (OffsetOfFreeSpaceNode != AMD_HEAP_INVALID_HEAP_OFFSET) {
+ if ((OffsetOfFreeSpaceNode + sizeof (BUFFER_NODE) + FreeSpaceNode->BufferSize) == OffsetOfCurrentNode) {
+ DeleteFreeSpaceNode (StdHeader, OffsetOfFreeSpaceNode);
+ NodeSize = FreeSpaceNode->BufferSize + CurrentNode->BufferSize + sizeof (BUFFER_NODE);
+ OffsetOfCurrentNode = OffsetOfFreeSpaceNode;
+ CurrentNode = FreeSpaceNode;
+ CurrentNode->BufferSize = NodeSize;
+ } else if (OffsetOfFreeSpaceNode == (OffsetOfCurrentNode + sizeof (BUFFER_NODE) + CurrentNode->BufferSize)) {
+ DeleteFreeSpaceNode (StdHeader, OffsetOfFreeSpaceNode);
+ NodeSize = FreeSpaceNode->BufferSize + CurrentNode->BufferSize + sizeof (BUFFER_NODE);
+ CurrentNode->BufferSize = NodeSize;
+ }
+ OffsetOfFreeSpaceNode = FreeSpaceNode->OffsetOfNextNode;
+ FreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfFreeSpaceNode);
+ }
+ InsertFreeSpaceNode (StdHeader, OffsetOfCurrentNode);
+ return AGESA_SUCCESS;
+ } else {
+ // If HeapStatus == HEAP_SYSTEM_MEM, try callout function
+ if (StdHeader->HeapStatus == HEAP_SYSTEM_MEM) {
+ AgesaBuffer.StdHeader = *StdHeader;
+ AgesaBuffer.BufferHandle = BufferHandle;
+
+ AGESA_TESTPOINT (TpIfBeforeDeallocateHeapBuffer, StdHeader);
+ if (AgesaDeallocateBuffer (0, &AgesaBuffer) != AGESA_SUCCESS) {
+ return AGESA_ERROR;
+ }
+ AGESA_TESTPOINT (TpIfAfterDeallocateHeapBuffer, StdHeader);
+
+ return AGESA_SUCCESS;
+ }
+ // If we are still unable to locate the buffer handle, return AGESA_BOUNDS_CHK
+ if ((BaseAddress != NULL) && (HeapManager->Signature == HEAP_SIGNATURE_VALID)) {
+ PutEventLog (AGESA_BOUNDS_CHK,
+ CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT,
+ BufferHandle, 0, 0, 0, StdHeader);
+ } else {
+ ASSERT (FALSE);
+ }
+ return AGESA_BOUNDS_CHK;
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Locates a previously allocated buffer on the heap.
+ *
+ * This function searches the heap for a buffer with the desired handle, and
+ * returns a pointer to the buffer.
+ *
+ * @param[in,out] LocateHeap Structure containing the buffer's handle,
+ * and the return pointer.
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ * @retval AGESA_SUCCESS No error
+ * @retval AGESA_BOUNDS_CHK Handle does not exist on the heap
+ *
+ */
+AGESA_STATUS
+HeapLocateBuffer (
+ IN OUT LOCATE_HEAP_PTR *LocateHeap,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *BaseAddress;
+ UINT8 AlignTo16Byte;
+ UINT32 OffsetOfCurrentNode;
+ BOOLEAN HeapLocateFlag;
+ HEAP_MANAGER *HeapManager;
+ BUFFER_NODE *CurrentNode;
+ AGESA_BUFFER_PARAMS AgesaBuffer;
+
+ ASSERT (StdHeader != NULL);
+
+ HeapLocateFlag = TRUE;
+ BaseAddress = (UINT8 *) (UINTN) StdHeader->HeapBasePtr;
+ HeapManager = (HEAP_MANAGER *) BaseAddress;
+
+ // Check Heap database is valid
+ if ((BaseAddress == NULL) || (HeapManager->Signature != HEAP_SIGNATURE_VALID)) {
+ // The base address in StdHeader is incorrect, get base address by itself
+ BaseAddress = (UINT8 *)(UINT32) HeapGetBaseAddress (StdHeader);
+ HeapManager = (HEAP_MANAGER *) BaseAddress;
+ if ((BaseAddress == NULL) || (HeapManager->Signature != HEAP_SIGNATURE_VALID)) {
+ // Heap is not available, ASSERT here
+ ASSERT (FALSE);
+ return AGESA_ERROR;
+ }
+ StdHeader->HeapBasePtr = (UINT64)(UINT32) BaseAddress;
+ }
+ OffsetOfCurrentNode = HeapManager->FirstActiveBufferOffset;
+ CurrentNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+
+ // Find buffer using internal heap manager
+ // Locate the heap using handle = LocateHeap-> BufferHandle
+ // If HeapStatus != HEAP_SYSTEM_ MEM
+ if ((BaseAddress != NULL) && (HeapManager->Signature == HEAP_SIGNATURE_VALID)) {
+ if (OffsetOfCurrentNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+ HeapLocateFlag = FALSE;
+ } else {
+ while (CurrentNode->BufferHandle != LocateHeap->BufferHandle) {
+ if (CurrentNode->OffsetOfNextNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+ HeapLocateFlag = FALSE;
+ break;
+ } else {
+ OffsetOfCurrentNode = CurrentNode->OffsetOfNextNode;
+ CurrentNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+ }
+ }
+ }
+ } else {
+ HeapLocateFlag = FALSE;
+ }
+
+ if (HeapLocateFlag) {
+ AlignTo16Byte = CurrentNode->PadSize;
+ LocateHeap->BufferPtr = (UINT8 *) ((UINT8 *) CurrentNode + sizeof (BUFFER_NODE) + SIZE_OF_SENTINEL + AlignTo16Byte);
+ LocateHeap->BufferSize = CurrentNode->BufferSize - NUM_OF_SENTINEL * SIZE_OF_SENTINEL - AlignTo16Byte;
+ return AGESA_SUCCESS;
+ } else {
+ // If HeapStatus == HEAP_SYSTEM_MEM, try callout function
+ if (StdHeader->HeapStatus == HEAP_SYSTEM_MEM) {
+ AgesaBuffer.StdHeader = *StdHeader;
+ AgesaBuffer.BufferHandle = LocateHeap->BufferHandle;
+
+ AGESA_TESTPOINT (TpIfBeforeLocateHeapBuffer, StdHeader);
+ if (AgesaLocateBuffer (0, &AgesaBuffer) != AGESA_SUCCESS) {
+ LocateHeap->BufferPtr = NULL;
+ return AGESA_ERROR;
+ }
+ LocateHeap->BufferSize = AgesaBuffer.BufferLength;
+ AGESA_TESTPOINT (TpIfAfterLocateHeapBuffer, StdHeader);
+
+ LocateHeap->BufferPtr = (UINT8 *) (AgesaBuffer.BufferPointer);
+ return AGESA_SUCCESS;
+ }
+
+ // If we are still unable to deallocate the buffer handle, return AGESA_BOUNDS_CHK
+ LocateHeap->BufferPtr = NULL;
+ LocateHeap->BufferSize = 0;
+ if ((BaseAddress != NULL) && (HeapManager->Signature == HEAP_SIGNATURE_VALID)) {
+ PutEventLog (AGESA_BOUNDS_CHK,
+ CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT,
+ LocateHeap->BufferHandle, 0, 0, 0, StdHeader);
+ } else {
+ ASSERT (FALSE);
+ }
+ return AGESA_BOUNDS_CHK;
+ }
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Get the heap base address
+ *
+ * This function will try to locate heap from cache, temp memory, main memory.
+ * The heap signature will be checked for validity on each possible location.
+ * Firstly, try if heap base is in cache by calling the function HeapGetCurrentBase.
+ * Secondly, try if heap base is temp memory by UserOptoions.CfgHeapDramAddress.
+ * Thirdly, try if heap base is in main memory by doing a buffer locate with buffer handle
+ * AMD_HEAP_IN_MAIN_MEMORY_HANDLE.
+ * If no valid heap signature is found in each possible location above, a NULL pointer is returned.
+ *
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ * @return Heap base address of the executing core's heap.
+ *
+ */
+UINT64
+HeapGetBaseAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 BaseAddress;
+ HEAP_MANAGER *HeapManager;
+ AGESA_BUFFER_PARAMS AgesaBuffer;
+
+ // Firstly, we try to see if heap is in cache
+ BaseAddress = HeapGetCurrentBase (StdHeader);
+ HeapManager = (HEAP_MANAGER *) (UINTN) BaseAddress;
+
+ if (HeapManager->Signature != HEAP_SIGNATURE_VALID) {
+ if ((StdHeader->HeapStatus != HEAP_DO_NOT_EXIST_YET) &&
+ (StdHeader->HeapStatus != HEAP_LOCAL_CACHE)) {
+ // Secondly, we try to see if heap is in temp memory
+ BaseAddress = HeapGetBaseAddressInTempMem (StdHeader);
+ HeapManager = (HEAP_MANAGER *) (UINTN) BaseAddress;
+ if (HeapManager->Signature != HEAP_SIGNATURE_VALID) {
+ // Thirdly, we try to see if heap in main memory
+ // by locating with external buffer manager (IBV)
+ AgesaBuffer.StdHeader = *StdHeader;
+ AgesaBuffer.BufferHandle = AMD_HEAP_IN_MAIN_MEMORY_HANDLE;
+ if (AgesaLocateBuffer (0, &AgesaBuffer) == AGESA_SUCCESS) {
+ BaseAddress = (UINT64) (UINTN) AgesaBuffer.BufferPointer;
+ HeapManager = (HEAP_MANAGER *) (UINTN) BaseAddress;
+ if (HeapManager->Signature != HEAP_SIGNATURE_VALID) {
+ // No valid heap signature ever found, return a NULL pointer
+ BaseAddress = (UINT64) (UINTN) NULL;
+ }
+ } else {
+ // No heap buffer is allocated by external manager (IBV), return a NULL pointer
+ BaseAddress = (UINT64) (UINTN) NULL;
+ }
+ }
+ } else if (StdHeader->HeapStatus == HEAP_LOCAL_CACHE) {
+ BaseAddress = (UINT64) (UINTN) NULL;
+ }
+ }
+ return BaseAddress;
+}
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * DeleteFreeSpaceNode
+ *
+ * Description:
+ * Delete a free space node from free space chain
+ *
+ * Parameters:
+ * @param[in] StdHeader Config handle for library and services.
+ * @param[in] OffsetOfDeletedNode Offset of deleted node.
+ *
+ * Processing:
+ *
+ */
+VOID
+STATIC
+DeleteFreeSpaceNode (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT32 OffsetOfDeletedNode
+ )
+{
+ UINT8 *BaseAddress;
+ UINT32 OffsetOfPreviousNode;
+ UINT32 OffsetOfCurrentNode;
+ HEAP_MANAGER *HeapManager;
+ BUFFER_NODE *CurrentFreeSpaceNode;
+ BUFFER_NODE *PreviousFreeSpaceNode;
+
+
+ BaseAddress = (UINT8 *) (UINTN) StdHeader->HeapBasePtr;
+ HeapManager = (HEAP_MANAGER *) BaseAddress;
+
+ OffsetOfPreviousNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+ OffsetOfCurrentNode = HeapManager->FirstFreeSpaceOffset;
+ //
+ // After AmdInitEnv, there is no free space provided for HeapAllocateBuffer.
+ // Hence if the FirstFreeSpaceOffset is AMD_HEAP_INVALID_HEAP_OFFSET, then
+ // no need to do more on delete node.
+ //
+ if (OffsetOfCurrentNode != AMD_HEAP_INVALID_HEAP_OFFSET) {
+ CurrentFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+ while ((OffsetOfCurrentNode != AMD_HEAP_INVALID_HEAP_OFFSET) && (OffsetOfCurrentNode != OffsetOfDeletedNode)) {
+ OffsetOfPreviousNode = OffsetOfCurrentNode;
+ OffsetOfCurrentNode = CurrentFreeSpaceNode->OffsetOfNextNode;
+ CurrentFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+ }
+ if (OffsetOfCurrentNode != AMD_HEAP_INVALID_HEAP_OFFSET) {
+ if (OffsetOfPreviousNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+ HeapManager->FirstFreeSpaceOffset = CurrentFreeSpaceNode->OffsetOfNextNode;
+ } else {
+ PreviousFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfPreviousNode);
+ PreviousFreeSpaceNode->OffsetOfNextNode = CurrentFreeSpaceNode->OffsetOfNextNode;
+ }
+ }
+ }
+ return;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * InsertFreeSpaceNode
+ *
+ * Description:
+ * Insert a free space node to free space chain, size order
+ *
+ * Parameters:
+ * @param[in] StdHeader Config handle for library and services.
+ * @param[in] OffsetOfInsertNode Offset of inserted node.
+ *
+ * Processing:
+ *
+ */
+VOID
+STATIC
+InsertFreeSpaceNode (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT32 OffsetOfInsertNode
+ )
+{
+ UINT8 *BaseAddress;
+ UINT32 OffsetOfPreviousNode;
+ UINT32 OffsetOfCurrentNode;
+ HEAP_MANAGER *HeapManager;
+ BUFFER_NODE *CurrentFreeSpaceNode;
+ BUFFER_NODE *PreviousFreeSpaceNode;
+ BUFFER_NODE *InsertedFreeSpaceNode;
+
+ BaseAddress = (UINT8 *) (UINTN) StdHeader->HeapBasePtr;
+ HeapManager = (HEAP_MANAGER *) BaseAddress;
+
+ OffsetOfPreviousNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+ OffsetOfCurrentNode = HeapManager->FirstFreeSpaceOffset;
+ CurrentFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+ InsertedFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfInsertNode);
+ while ((OffsetOfCurrentNode != AMD_HEAP_INVALID_HEAP_OFFSET) &&
+ (CurrentFreeSpaceNode->BufferSize < InsertedFreeSpaceNode->BufferSize)) {
+ OffsetOfPreviousNode = OffsetOfCurrentNode;
+ OffsetOfCurrentNode = CurrentFreeSpaceNode->OffsetOfNextNode;
+ CurrentFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfCurrentNode);
+ }
+ InsertedFreeSpaceNode->OffsetOfNextNode = OffsetOfCurrentNode;
+ if (OffsetOfPreviousNode == AMD_HEAP_INVALID_HEAP_OFFSET) {
+ HeapManager->FirstFreeSpaceOffset = OffsetOfInsertNode;
+ } else {
+ PreviousFreeSpaceNode = (BUFFER_NODE *) (BaseAddress + OffsetOfPreviousNode);
+ PreviousFreeSpaceNode->OffsetOfNextNode = OffsetOfInsertNode;
+ }
+ return;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Determines the base address of the executing core's heap.
+ *
+ * This function uses the executing core's socket/core numbers to determine
+ * where it's heap should be located.
+ *
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ * @return A pointer to the executing core's heap.
+ *
+ */
+UINT64
+STATIC
+HeapGetCurrentBase (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 SystemCoreNumber;
+ UINT64 ReturnPtr;
+ AGESA_STATUS IgnoredStatus;
+ CPU_SPECIFIC_SERVICES *FamilyServices;
+
+ if (IsBsp (StdHeader, &IgnoredStatus)) {
+ ReturnPtr = AMD_HEAP_START_ADDRESS;
+ } else {
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+
+ SystemCoreNumber = FamilyServices->GetApCoreNumber (FamilyServices, StdHeader);
+ ASSERT (SystemCoreNumber != 0);
+ ASSERT (SystemCoreNumber < 64);
+ ReturnPtr = ((SystemCoreNumber * AMD_HEAP_SIZE_PER_CORE) + AMD_HEAP_START_ADDRESS);
+ }
+ ASSERT (ReturnPtr <= ((AMD_HEAP_REGION_END_ADDRESS + 1) - AMD_HEAP_SIZE_PER_CORE));
+ return ReturnPtr;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/heapManager.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/heapManager.h
new file mode 100644
index 0000000..a57c0d2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/heapManager.h
@@ -0,0 +1,258 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Heap Manager and Heap Allocation APIs, and related functions.
+ *
+ * Contains code that initialize, maintain, and allocate the heap space.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _HEAP_MANAGER_H_
+#define _HEAP_MANAGER_H_
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+#define AMD_MTRR_VARIABLE_BASE0 0x200
+#define AMD_MTRR_VARIABLE_HEAP_BASE 0x20A
+#define AMD_MTRR_VARIABLE_HEAP_MASK (AMD_MTRR_VARIABLE_HEAP_BASE + 1)
+
+#define AMD_HEAP_START_ADDRESS 0x400000ul
+#define AMD_HEAP_REGION_END_ADDRESS 0xBFFFFFul
+#define AMD_HEAP_SIZE_PER_CORE 0x010000ul
+#define AMD_HEAP_INVALID_HEAP_OFFSET 0xFFFFFFFFul
+#define AMD_HEAP_MTRR_MASK ((0xFFFFFFFFFFFFF800ull & (((UINT64)AMD_HEAP_SIZE_PER_CORE ^ (-1)) + 1)) | 0x800)
+#define AMD_HEAP_SIZE_DWORD_PER_CORE (AMD_HEAP_SIZE_PER_CORE / 4)
+
+#define AMD_TEMP_TOM 0x20000000ul // Set TOM to 512 MB (temporary value)
+#define AMD_VAR_MTRR_ENABLE_BIT 0x100000ul // bit 20
+
+#define AMD_HEAP_RAM_ADDRESS 0xB0000ul
+
+#define HEAP_SIGNATURE_VALID 0x50414548ul // Signature: 'HEAP'
+#define HEAP_SIGNATURE_INVALID 0x00000000ul // Signature cleared
+
+///Heap Manager Life cycle
+#define HEAP_DO_NOT_EXIST_YET 1
+#define HEAP_LOCAL_CACHE 2
+#define HEAP_TEMP_MEM 3
+#define HEAP_SYSTEM_MEM 4
+#define HEAP_DO_NOT_EXIST_ANYMORE 5
+#define HEAP_S3_RESUME 6
+#define HEAP_RUNTIME_SYSTEM_MEM 7
+
+///Heap callout
+#define HEAP_CALLOUT_BOOTTIME 0
+#define HEAP_CALLOUT_RUNTIME 1
+
+#define AMD_MTRR_FIX64k_00000 0x250
+#define AMD_MTRR_FIX16k_80000 0x258
+#define AMD_MTRR_FIX16k_A0000 0x259
+#define AMD_MTRR_FIX4k_C0000 0x268
+#define AMD_MTRR_FIX4k_C8000 0x269
+#define AMD_MTRR_FIX4k_D0000 0x26A
+#define AMD_MTRR_FIX4k_D8000 0x26B
+#define AMD_MTRR_FIX4k_E0000 0x26C
+#define AMD_MTRR_FIX4k_E8000 0x26D
+#define AMD_MTRR_FIX4k_F0000 0x26E
+#define AMD_MTRR_FIX4k_F8000 0x26F
+
+#define AMD_MTRR_FIX64K_WB_DRAM 0x1E
+#define AMD_MTRR_FIX64K_WT_DRAM 0x1C
+#define AMD_MTRR_FIX64K_UC_DRAM 0x18
+#define AMD_MTRR_FIX16K_WB_DRAM 0x1E1E1E1E1E1E1E1Eull
+#define AMD_MTRR_FIX16K_WT_DRAM 0x1C1C1C1C1C1C1C1Cull
+#define AMD_MTRR_FIX16K_UC_DRAM 0x1818181818181818ull
+#define AMD_MTRR_FIX4K_WB_DRAM 0x1E1E1E1E1E1E1E1Eull
+#define AMD_MTRR_FIX4K_WT_DRAM 0x1C1C1C1C1C1C1C1Cull
+#define AMD_MTRR_FIX4K_UC_DRAM 0x1818181818181818ull
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+/// Allocate Heap Parameters
+typedef struct _ALLOCATE_HEAP_PARAMS {
+ UINT32 RequestedBufferSize; ///< Size of buffer.
+ UINT32 BufferHandle; ///< An unique ID of buffer.
+ UINT8 Persist; ///< A flag. If marked, to be stored and passed to AmdInitLate.
+ UINT8 *BufferPtr; ///< Pointer to buffer.
+} ALLOCATE_HEAP_PARAMS;
+
+/// Locate Heap Parameters
+typedef struct _LOCATE_HEAP_PTR {
+ UINT32 BufferHandle; ///< An unique ID of buffer.
+ UINT32 BufferSize; ///< Data buffer size.
+ UINT8 *BufferPtr; ///< Pointer to buffer.
+} LOCATE_HEAP_PTR;
+
+/// Heap Node Header
+typedef struct _BUFFER_NODE {
+ UINT32 BufferHandle; ///< An unique ID of buffer.
+ UINT32 BufferSize; ///< Size of buffer.
+ UINT8 Persist; ///< A flag. If marked, to be stored and passed to AmdInitLate.
+ UINT8 PadSize; ///< Size of pad.
+ UINT32 OffsetOfNextNode; ///< Offset of next node (relative to the base).
+} BUFFER_NODE;
+
+/// Heap Manager
+typedef struct _HEAP_MANAGER {
+ UINT32 Signature; ///< a signature to indicate if the heap is valid.
+ UINT32 UsedSize; ///< Used size of heap.
+ UINT32 FirstActiveBufferOffset; ///< Offset of the first active buffer.
+ UINT32 FirstFreeSpaceOffset; ///< Offset of the first free space.
+} HEAP_MANAGER;
+
+/// AGESA Buffer Handles (These are reserved)
+typedef enum {
+ AMD_INIT_RESET_HANDLE = 0x000A000, ///< Assign 0x000A000 buffer handle to AmdInitReset routine.
+ AMD_INIT_EARLY_HANDLE, ///< Assign 0x000A001 buffer handle to AmdInitEarly routine.
+ AMD_INIT_POST_HANDLE, ///< Assign 0x000A002 buffer handle to AmdInitPost routine.
+ AMD_INIT_ENV_HANDLE, ///< Assign 0x000A003 buffer handle to AmdInitEnv routine.
+ AMD_INIT_MID_HANDLE, ///< Assign 0x000A004 buffer handle to AmdInitMid routine.
+ AMD_INIT_LATE_HANDLE, ///< Assign 0x000A005 buffer handle to AmdInitLate routine.
+ AMD_INIT_RESUME_HANDLE, ///< Assign 0x000A006 buffer handle to AmdInitResume routine.
+ AMD_LATE_RUN_AP_TASK_HANDLE, ///< Assign 0x000A007 buffer handle to AmdLateRunApTask routine.
+ AMD_S3_SAVE_HANDLE, ///< Assign 0x000A008 buffer handle to AmdS3Save routine.
+ AMD_S3_LATE_RESTORE_HANDLE, ///< Assign 0x000A009 buffer handle to AmdS3LateRestore routine.
+ AMD_S3_SCRIPT_SAVE_TABLE_HANDLE, ///< Assign 0x000A00A buffer handle to be used for S3 save table
+ AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE, ///< Assign 0x000A00B buffer handle to be used for S3 save table
+ AMD_CPU_AP_TASKING_HANDLE, ///< Assign 0x000A00C buffer handle to AP tasking input parameters.
+ AMD_REC_MEM_SOCKET_HANDLE, ///< Assign 0x000A00D buffer handle to save socket with memory in memory recovery mode.
+ AMD_MEM_AUTO_HANDLE, ///< Assign 0x000A00E buffer handle to AmdMemAuto routine.
+ AMD_MEM_SPD_HANDLE, ///< Assign 0x000A00F buffer handle to AmdMemSpd routine.
+ AMD_MEM_DATA_HANDLE, ///< Assign 0x000A010 buffer handle to MemData
+ AMD_MEM_TRAIN_BUFFER_HANDLE, ///< Assign 0x000A011 buffer handle to allocate buffer for training
+ AMD_MEM_S3_DATA_HANDLE, ///< Assign 0x000A012 buffer handle to special case register for S3
+ AMD_MEM_S3_NB_HANDLE, ///< Assign 0x000A013 buffer handle to NB block for S3
+ AMD_MEM_S3_MR0_DATA_HANDLE, ///< Assign 0x000A014 buffer handle to MR0 data block for S3
+ AMD_UMA_INFO_HANDLE, ///< Assign 0x000A015 buffer handle to be used for Uma information
+ AMD_DMI_MEM_DEV_INFO_HANDLE, ///< Assign 0x000A016 buffer handle to DMI Type16 17 19 20 information
+ HT_STATE_DATA_HANDLE, ///< Assign 0x000A017 buffer handle to HT State Data
+ PRESERVE_MAIL_BOX_HANDLE, ///< Assign 0x000A018 buffer handle for Preserve Mailbox Feature.
+ EVENT_LOG_BUFFER_HANDLE, ///< Assign 0x000A019 buffer handle to Event Log
+ IDS_CONTROL_HANDLE, ///< Assign 0x000A01A buffer handle to AmdIds routine.
+ IDS_HT_DATA_HANDLE, ///< Assign 0x000A01B buffer handle to Ht IDS control
+ IDS_HDT_OUT_BUFFER_HANDLE, ///< Assign 0x000A01C buffer handle to be used for HDTOUT support.
+ IDS_CHECK_POINT_PERF_HANDLE, ///< Assign 0x000A01D buffer handle to Performance analysis
+ AMD_PCIE_COMPLEX_DATA_HANDLE, ///< Assign 0x000A01E buffer handle to be used for PCIe support
+ AMD_MEM_SYS_DATA_HANDLE, ///< Assign 0x000A01F buffer handle to be used for memory data structure
+ AMD_GNB_SMU_CONFIG_HANDLE, ///< Assign 0x000A020 buffer handle to be used for GNB SMU configuration
+ AMD_PP_F1_TABLE_HANDLE, ///< Assign 0x000A021
+ AMD_GFX_PLATFORM_CONFIG_HANDLE, ///< Assign 0x000A022 buffer handle to be used for Gfx platform configuration
+ AMD_GNB_TEMP_DATA_HANDLE, ///< Assign 0x000A023 buffer handle for GNB general purpose data block
+ AMD_MEM_2D_RDQS_HANDLE, ///< Assign 0x000A024 buffer handle for 2D training
+ AMD_MEM_2D_RD_WR_HANDLE, ///< Assign 0x000A025 buffer handle for 2D Read/Write training
+ AMD_GNB_IOMMU_SCRATCH_MEM_HANDLE, ///< Assign 0x000A026 buffer handle to be used for GNB IOMMU scratch memory
+ AMD_MEM_S3_SAVE_HANDLE, ///< Assign 0x000A027 buffer handle for memory data saved right after memory init
+ AMD_MEM_2D_RDQS_RIM_HANDLE, ///< Assign 0x000A028 buffer handle for 2D training Eye RIM Search
+ AMD_MEM_2D_RD_WR_RIM_HANDLE, ///< Assign 0x000A029 buffer handle for 2D Read/Write training Eye RIM Search
+ AMD_TDP_LIMIT_SAVED_PSTATE, ///< Assign 0x000A02A buffer handle for TDP limiting feature to save Pstate
+ AMD_CPU_NB_PSTATE_FIXUP_HANDLE, ///< Assign 0x000A02B buffer handle for an NB P-state workaround
+ AMD_MEM_CRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000A02C buffer handle for CRAT Memory affinity component structure
+ AMD_SKIP_MEM_S3_SAVE, ///< Assign 0x000A02D buffer handle for the flag to skip memory S3 save
+ AMD_SCS_SMU_RAM_INFO, ///< Assign 0x000A02E buffer handle for keeping the result of SMU SCS service
+ AMD_SCS_HWP0_FREQ, ///< Assign 0x000A02F buffer handler for keeping frequency of HWP0
+ AMD_IS_FEATURE_ENABLED, ///< Assign 0x000A030 buffer handle for keeping the result of IsFeatureEnabled
+ AMD_MEM_DATAEYE_WORK_AREA_HANDLE, ///< Assign 0x000A031 buffer handle for Composite Data Eye Compression Work Area
+ AMD_GNB_SAMU_PATCH_HANDLE, ///< Assign 0x000A032 buffer handle for Samu patch buffer
+ AMD_GNB_SAMU_BOOT_CONTROL_HANDLE, ///< Assign 0x000A033 buffer handle for Samu boot control buffer
+ AMD_MEM_MISC_HANDLES_START = 0x1000000, ///< Reserve 0x1000000 to 0x1FFFFFF buffer handle
+ AMD_MEM_MISC_HANDLES_END = 0x1FFFFFF, ///< miscellaneous memory init tasks' buffers.
+ AMD_HEAP_IN_MAIN_MEMORY_HANDLE = 0x8000000, ///< Assign 0x8000000 to AMD_HEAP_IN_MAIN_MEMORY_HANDLE.
+ SOCKET_DIE_MAP_HANDLE = 0x534F4B54, ///< 'sokt'
+ NODE_ID_MAP_HANDLE = 0x4E4F4445, ///< 'node'
+ HOP_COUNT_TABLE_HANDLE = 0x484F5053, ///< 'hops'
+ AP_MAIL_BOX_CACHE_HANDLE = 0x414D4258, ///< 'ambx'
+ AMD_FCH_RESET_DATA_BLOCK_HANDLE = 0x46434852, ///< 'FCHR' Buffer handle for FCH private data block at InitReset
+ AMD_FCH_DATA_BLOCK_HANDLE = 0x46434845, ///< 'FCHE' Buffer handle for FCH private data block at InitEnv
+ IDS_TRAP_TABLE_HANDLE = 0x49524547, ///< 'IREG' Handle for IDS register table
+ IDS_SAVE_IDTR_HANDLE = 0x49445452, ///< 'IDTR'
+ IDS_BSC_IDT_HANDLE = 0x42534349, ///< 'BSCI' BSC Idt table
+ IDS_NV_TO_CMOS_HANDLE = 0x534D4349, ///< 'ICMS' Handle for IDS CMOS save
+ IDS_GRA_HANDLE = 0x41524749, ///< 'IGRA' Handle for IDS GRA save
+ IDS_EXTEND_HANDLE = 0x54584549, ///< 'IEXT' Handle for IDS extend module
+ IDS_TEMP_DATA_HANDLE = 0x504D5459, ///< 'ITMP' Handle for IDS temp data
+} AGESA_BUFFER_HANDLE;
+
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+HeapManagerInit (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+HeapAllocateBuffer (
+ IN OUT ALLOCATE_HEAP_PARAMS *AllocateHeapParams,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+HeapDeallocateBuffer (
+ IN UINT32 BufferHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+HeapLocateBuffer (
+ IN OUT LOCATE_HEAP_PTR *LocateHeap,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT64
+HeapGetBaseAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+EventLogInitialization (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+#endif // _HEAP_MANAGER_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/CPU/mmioMapManager.h b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/mmioMapManager.h
new file mode 100644
index 0000000..542faa6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/CPU/mmioMapManager.h
@@ -0,0 +1,143 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD MMIO Map Manager APIs, and related functions.
+ *
+ * Contains code that manage MMIO base/limit registers
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: CPU
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _MMIO_MAP_MANAGER_H_
+#define _MMIO_MAP_MANAGER_H_
+
+/*---------------------------------------------------------------------------------------
+ * M I X E D (Definitions And Macros / Typedefs, Structures, Enums)
+ *---------------------------------------------------------------------------------------
+ */
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (MMIO_MAP_FAMILY_SERVICES);
+
+/*---------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *---------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ * T Y P E D E F S, S T R U C T U R E S, E N U M S
+ *---------------------------------------------------------------------------------------
+ */
+/// MMIO attribute
+typedef struct _AMD_MMIO_ATTRIBUTE {
+ UINT8 MmioReadableRange:1; ///< Indicator whether the range is readable
+ UINT8 MmioWritableRange:1; ///< Indicator whether the range is writable
+ UINT8 MmioPostedRange:1; ///< Indicator whether the range is posted
+ UINT8 MmioSecuredRange:1; ///< Indicator whether the range is locked
+ UINT8 :3; ///< Reserved
+ UINT8 OverrideExisting:1; ///< Indicator whether to override the existing MMIO map configurations
+} AMD_MMIO_ATTRIBUTE;
+
+/// MMIO destination
+typedef struct _AMD_MMIO_DST {
+ UINT32 DstNode:3; ///< Destination node ID bits
+ UINT32 DstLink:2; ///< Destination link ID
+ UINT32 DstSubLink:1; ///< Destination sublink
+} AMD_MMIO_DST;
+
+/// MMIO range
+typedef struct _MMIO_RANGE {
+ UINT64 Base; ///< Base
+ UINT64 Limit; ///< Limit
+ AMD_MMIO_ATTRIBUTE Attribute; ///< Attribute
+ AMD_MMIO_DST Destination; ///< Destination
+ UINT8 RangeNum; ///< Range No.
+ BOOLEAN Modified; ///< if this MMIO base/limit registers need to be updated
+} MMIO_RANGE;
+
+/// AMD_ADD_MMIO_PARAMS
+typedef struct _AMD_ADD_MMIO_PARAMS {
+ AMD_CONFIG_PARAMS StdHeader; ///< Config Handle for library, services.
+ UINT64 BaseAddress; ///< This is the starting address of the requested MMIO range.
+ UINT64 Length; ///< This is the length of the range to allocate, in bytes.
+ PCI_ADDR TargetAddress; ///< This is the PCIe address of the device for which this range is allocated, and it
+ ///< provides the bus, device, and function of the target device.
+ AMD_MMIO_ATTRIBUTE Attributes;///< This indicates the attributes of the requested range.
+} AMD_ADD_MMIO_PARAMS;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Family specific call to MMIO map manager.
+ *
+ * @param[in] MmioMapServices MMIO map manager services.
+ * @param[in] AmdAddMmioParams Pointer to a data structure containing the parameter information.
+ *
+ * @return Family specific error value.
+ *
+ */
+typedef AGESA_STATUS F_MMIO_MAP_ADDING_MAP (
+ IN MMIO_MAP_FAMILY_SERVICES *MmioMapServices,
+ IN AMD_ADD_MMIO_PARAMS AmdAddMmioParams
+ );
+
+/// Reference to a Method.
+typedef F_MMIO_MAP_ADDING_MAP *PF_MMIO_MAP_ADDING_MAP;
+
+/**
+ * Provide the interface to the MMIO map manager Family Specific Services.
+ *
+ * Use the methods or data in this struct to adapt the feature code to a specific cpu family or model (or stepping!).
+ * Each supported Family must provide an implementation for all methods in this interface, even if the
+ * implementation is a CommonReturn().
+ */
+struct _MMIO_MAP_FAMILY_SERVICES {
+ UINT16 Revision; ///< Interface version
+ // Public Methods.
+ PF_MMIO_MAP_ADDING_MAP addingMmioMap; ///< Method: Family specific call to adding MMIO map.
+};
+
+/*---------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *---------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+AmdAddMmioMapping (
+ IN AMD_ADD_MMIO_PARAMS AmdAddMmioParams
+ );
+
+#endif // _MMIO_MAP_MANAGER_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdFch.h b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdFch.h
new file mode 100644
index 0000000..adef011
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdFch.h
@@ -0,0 +1,65 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD FCH Component
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _AMD_FCH_H_
+#define _AMD_FCH_H_
+
+typedef AGESA_STATUS FCH_INIT (IN VOID *DataPtr);
+typedef VOID FCH_TASK_ENTRY (IN VOID *FchCfg);
+
+
+/// FCH API build options
+typedef struct {
+ FCH_INIT *InitReset; ///< InitReset
+ FCH_INIT *InitResetConstructor; ///< InitResetConstructor
+ FCH_INIT *InitEnv; ///< InitEnv
+ FCH_INIT *InitEnvConstructor; ///< InitEnvConstructor
+ FCH_INIT *InitMid; ///< InitMid
+ FCH_INIT *InitMidConstructor; ///< InitMidConstructor
+ FCH_INIT *InitLate; ///< InitLate
+ FCH_INIT *InitLateConstructor; ///< InitLateConstructor
+} BLDOPT_FCH_FUNCTION;
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitEarly.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitEarly.c
new file mode 100644
index 0000000..ebefda7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitEarly.c
@@ -0,0 +1,323 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Interface
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuCacheInit.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "AdvancedApi.h"
+#include "cpuServices.h"
+#include "CommonInits.h"
+#include "GnbInterface.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_COMMON_AMDINITEARLY_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+EXECUTION_CACHE_REGION InitExeCacheMap[] =
+{
+ {0x00000000, 0x00000000},
+ {0x00000000, 0x00000000},
+ {0x00000000, 0x00000000}
+};
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdEarlyPlatformConfigInit (
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+AllocateExecutionCacheInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN EXECUTION_CACHE_REGION *AmdExeAddrMapPtr
+ );
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initialize AmdInitEarly stage platform profile and user option input.
+ *
+ * @param[in,out] PlatformConfig Platform profile/build option config structure
+ * @param[in,out] StdHeader AMD standard header config param
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdEarlyPlatformConfigInit (
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CommonPlatformConfigInit (PlatformConfig, StdHeader);
+
+ return AGESA_SUCCESS;
+}
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initializer routine that will be invoked by the wrapper to initialize the input
+ * structure for the AllocateExecutionCache.
+ *
+ * @param[in] StdHeader Opaque handle to standard config header
+ * @param[in] AmdExeAddrMapPtr Our Service interface struct
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AllocateExecutionCacheInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN EXECUTION_CACHE_REGION *AmdExeAddrMapPtr
+ )
+{
+ UINT8 i;
+ ASSERT (AmdExeAddrMapPtr != NULL);
+
+ for (i = 0; i < MAX_CACHE_REGIONS; ++i) {
+ AmdExeAddrMapPtr[i].ExeCacheStartAddr = InitExeCacheMap[i].ExeCacheStartAddr;
+ AmdExeAddrMapPtr[i].ExeCacheSize = InitExeCacheMap[i].ExeCacheSize;
+ }
+
+ return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *
+ * Initializer routine that will be invoked by the wrapper to initialize the input
+ * structure for the AmdInitEarly.
+ *
+ * @param[in] StdHeader AMD standard header config param.
+ * @param[in,out] EarlyParams The service interface struct to initialize.
+ *
+ * @retval AGESA_SUCCESS Always succeeds.
+ */
+AGESA_STATUS
+AmdInitEarlyInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_EARLY_PARAMS *EarlyParams
+ )
+{
+ ASSERT (StdHeader != NULL);
+ ASSERT (EarlyParams != NULL);
+
+ EarlyParams->StdHeader = *StdHeader;
+
+ // We don't check any AGESA_STATUS from the called constructors, since they MUST all SUCCEED.
+ //
+
+ AllocateExecutionCacheInitializer (&EarlyParams->StdHeader, &EarlyParams->CacheRegion[0]);
+
+ AmdHtInterfaceConstructor (&EarlyParams->StdHeader, &EarlyParams->HtConfig);
+
+ AmdEarlyPlatformConfigInit (&EarlyParams->PlatformConfig, &EarlyParams->StdHeader);
+
+ return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Perform initialization services required at the Early Init POST time point.
+ *
+ * Execution Cache, HyperTransport, and AP Init advanced services are performed.
+ *
+ * @param[in] EarlyParams The interface struct for all early services
+ *
+ * @return The most severe AGESA_STATUS returned by any called service.
+ *
+ */
+AGESA_STATUS
+AmdInitEarly (
+ IN OUT AMD_EARLY_PARAMS *EarlyParams
+ )
+{
+ AGESA_STATUS CalledAgesaStatus;
+ AGESA_STATUS EarlyInitStatus;
+ WARM_RESET_REQUEST Request;
+ UINT8 PrevRequestBit;
+ UINT8 PrevStateBits;
+
+ IDS_PERF_TIMESTAMP (TP_BEGINPROCAMDINITEARLY, &EarlyParams->StdHeader);
+
+ AGESA_TESTPOINT (TpIfAmdInitEarlyEntry, &EarlyParams->StdHeader);
+
+ EarlyInitStatus = AGESA_SUCCESS;
+
+ // Setup ROM execution cache
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AllocateExecutionCache: Start\n");
+ CalledAgesaStatus = AllocateExecutionCache (&EarlyParams->StdHeader, &EarlyParams->CacheRegion[0]);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AllocateExecutionCache: End\n");
+ if (CalledAgesaStatus > EarlyInitStatus) {
+ EarlyInitStatus = CalledAgesaStatus;
+ }
+
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ {
+ extern CHAR8 *BldOptDebugOutput[];
+
+ UINT8 i;
+ for (i = 0; BldOptDebugOutput[i] != NULL; i++) {
+ IDS_HDT_CONSOLE (MAIN_FLOW, "\t%s\n", BldOptDebugOutput[i]);
+ }
+ }
+ )
+
+ //
+ // WARNING: AGESA's own IDT is at heap which would be moved from one place to another
+ // so we MUST restore IDT every time before moving heap.
+ //
+ IDS_EXCEPTION_TRAP (IDS_IDT_REPLACE_IDTR_FOR_BSC, NULL, &EarlyParams->StdHeader);
+ ASSERT (EarlyParams != NULL);
+ PrevRequestBit = FALSE;
+ PrevStateBits = WR_STATE_COLD;
+ IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitEarly: Start %x \n\n", PrevStateBits);
+ // If a previously requested warm reset cannot be triggered in the
+ // current stage, store the previous state of request and reset the
+ // request struct to the current post stage
+ GetWarmResetFlag (&EarlyParams->StdHeader, &Request);
+ if (Request.RequestBit == TRUE) {
+ if (Request.StateBits >= Request.PostStage) {
+ PrevRequestBit = Request.RequestBit;
+ PrevStateBits = Request.StateBits;
+ Request.RequestBit = FALSE;
+ Request.StateBits = Request.PostStage - 1;
+ SetWarmResetFlag (&EarlyParams->StdHeader, &Request);
+ }
+ }
+
+ IDS_OPTION_HOOK (IDS_INIT_EARLY_BEFORE, EarlyParams, &EarlyParams->StdHeader);
+
+ // Full Hypertransport Initialization
+ // IMPORTANT: All AP cores call Ht Init. HT Init handles full init for the BSC, and map init for APs.
+ IDS_PERF_TIMESTAMP (TP_BEGINAMDHTINITIALIZE, &EarlyParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdHtInitialize: Start\n");
+ CalledAgesaStatus = AmdHtInitialize (&EarlyParams->StdHeader, &EarlyParams->PlatformConfig, &EarlyParams->HtConfig);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdHtInitialize: End\n");
+ IDS_PERF_TIMESTAMP (TP_ENDAMDHTINITIALIZE, &EarlyParams->StdHeader);
+ if (CalledAgesaStatus > EarlyInitStatus) {
+ EarlyInitStatus = CalledAgesaStatus;
+ }
+
+ IDS_PERF_TIMESTAMP (TP_BEGINGNBINITATEARLIER, &EarlyParams->StdHeader);
+ CalledAgesaStatus = GnbInitAtEarlier (EarlyParams);
+ IDS_PERF_TIMESTAMP (TP_ENDGNBINITATEARLIER, &EarlyParams->StdHeader);
+ if (CalledAgesaStatus > EarlyInitStatus) {
+ EarlyInitStatus = CalledAgesaStatus;
+ }
+
+ // AP launch
+ IDS_PERF_TIMESTAMP (TP_BEGINAMDCPUEARLY, &EarlyParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdCpuEarly: Start\n");
+ CalledAgesaStatus = AmdCpuEarly (&EarlyParams->StdHeader, &EarlyParams->PlatformConfig);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdCpuEarly: End\n");
+ IDS_PERF_TIMESTAMP (TP_ENDAMDCPUEARLY, &EarlyParams->StdHeader);
+ if (CalledAgesaStatus > EarlyInitStatus) {
+ EarlyInitStatus = CalledAgesaStatus;
+ }
+
+ // Warm Reset, should be at the end of AmdInitEarly
+ GetWarmResetFlag (&EarlyParams->StdHeader, &Request);
+ // If a warm reset is requested in the current post stage, trigger the
+ // warm reset and ignore the previous request
+ if (Request.RequestBit == TRUE) {
+ if (Request.StateBits < Request.PostStage) {
+ AgesaDoReset (WARM_RESET_WHENEVER, &EarlyParams->StdHeader);
+ }
+ } else {
+ // Otherwise, if there's a previous request, restore it
+ // so that the subsequent post stage can trigger the warm reset
+ if (PrevRequestBit == TRUE) {
+ Request.RequestBit = PrevRequestBit;
+ Request.StateBits = PrevStateBits;
+ SetWarmResetFlag (&EarlyParams->StdHeader, &Request);
+ }
+ }
+
+ IDS_PERF_TIMESTAMP (TP_BEGINGNBINITATEARLY, &EarlyParams->StdHeader);
+ CalledAgesaStatus = GnbInitAtEarly (EarlyParams);
+ IDS_PERF_TIMESTAMP (TP_ENDGNBINITATEARLY, &EarlyParams->StdHeader);
+ if (CalledAgesaStatus > EarlyInitStatus) {
+ EarlyInitStatus = CalledAgesaStatus;
+ }
+ // Check for Cache As Ram Corruption
+ IDS_CAR_CORRUPTION_CHECK (&EarlyParams->StdHeader);
+
+ IDS_OPTION_HOOK (IDS_INIT_EARLY_AFTER, EarlyParams, &EarlyParams->StdHeader);
+ AGESA_TESTPOINT (TpIfAmdInitEarlyExit, &EarlyParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitEarly: End\n\n");
+
+ // Flush out all debug contents in case warm reset is triggered after this point
+ IDS_HDT_CONSOLE_FLUSH_BUFFER (&EarlyParams->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_ENDPROCAMDINITEARLY, &EarlyParams->StdHeader);
+
+ return EarlyInitStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitEnv.c
new file mode 100644
index 0000000..83de69b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitEnv.c
@@ -0,0 +1,188 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Interface
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuEnvInit.h"
+#include "heapManager.h"
+#include "GnbInterface.h"
+#include "CommonInits.h"
+#include "AmdFch.h"
+#include "S3SaveState.h"
+#include "Filecode.h"
+#include "CreateStruct.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_COMMON_AMDINITENV_FILECODE
+
+extern BLDOPT_FCH_FUNCTION BldoptFchFunction;
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*
+ *---------------------------------------------------------------------------------------
+ *
+ * Initializer routine that will be invoked by the wrapper
+ * to initialize the input structure for the AmdInitEnv
+ *
+ * @param[in,out] EnvParamsPtr Newly created interface parameters for AmdInitEnv
+ *
+ * @retval AGESA_SUCCESS Always succeeds
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitEnvInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_ENV_PARAMS *EnvParamsPtr
+ )
+{
+ ASSERT (StdHeader != NULL);
+ ASSERT (EnvParamsPtr != NULL);
+
+ EnvParamsPtr->StdHeader = *StdHeader;
+
+ CommonPlatformConfigInit (&EnvParamsPtr->PlatformConfig, &EnvParamsPtr->StdHeader);
+ BldoptFchFunction.InitEnvConstructor (EnvParamsPtr);
+ GnbInitDataStructAtEnvDef (&EnvParamsPtr->GnbEnvConfiguration, EnvParamsPtr);
+
+ return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_INIT_ENV function.
+ *
+ * This entry point is responsible for copying the heap contents from the
+ * temp RAM area to main memory.
+ *
+ * @param[in,out] EnvParams Required input parameters for the AMD_INIT_ENV
+ * entry point.
+ *
+ * @return Aggregated status across all internal AMD env calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdInitEnv (
+ IN OUT AMD_ENV_PARAMS *EnvParams
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS AmdInitEnvStatus;
+
+ AGESA_TESTPOINT (TpIfAmdInitEnvEntry, &EnvParams->StdHeader);
+
+ ASSERT (EnvParams != NULL);
+ AmdInitEnvStatus = AGESA_SUCCESS;
+
+
+ //Copy Temp Ram heap content to Main Ram
+ AgesaStatus = CopyHeapToMainRamAtPost (&(EnvParams->StdHeader));
+ if (AgesaStatus > AmdInitEnvStatus) {
+ AmdInitEnvStatus = AgesaStatus;
+ }
+ EnvParams->StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ EnvParams->StdHeader.HeapBasePtr = HeapGetBaseAddress (&EnvParams->StdHeader);
+ // Any heap allocate/deallocate/locate buffer should be used after heap is rebuilt from here.
+ // After persistent heaps are transferred and rebuilt, HeapLocateBuffer can start to be used in IDS hook.
+
+ //Heap have been relocated, so Debug Print need be init again to get new address
+ IDS_PERF_TIMESTAMP (TP_BEGINPROCAMDINITENV, &EnvParams->StdHeader);
+ IDS_HDT_CONSOLE_INIT (&EnvParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "Heap transfer End\n");
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdInitEnv: Start\n\n");
+ IDS_OPTION_HOOK (IDS_PLATFORMCFG_OVERRIDE, &EnvParams->PlatformConfig, &(EnvParams->StdHeader));
+ IDS_OPTION_HOOK (IDS_BEFORE_PCI_INIT, EnvParams, &(EnvParams->StdHeader));
+
+ AgesaStatus = S3ScriptInit (&EnvParams->StdHeader);
+ if (AgesaStatus > AmdInitEnvStatus) {
+ AmdInitEnvStatus = AgesaStatus;
+ }
+
+ IDS_PERF_TIMESTAMP (TP_BEGININITENV, &EnvParams->StdHeader);
+ AgesaStatus = BldoptFchFunction.InitEnv (EnvParams);
+ AmdInitEnvStatus = (AgesaStatus > AmdInitEnvStatus) ? AgesaStatus : AmdInitEnvStatus;
+ IDS_PERF_TIMESTAMP (TP_ENDINITENV, &EnvParams->StdHeader);
+
+ IDS_PERF_TIMESTAMP (TP_BEGINGNBINITATENV, &EnvParams->StdHeader);
+ AgesaStatus = GnbInitAtEnv (EnvParams);
+ if (AgesaStatus > AmdInitEnvStatus) {
+ AmdInitEnvStatus = AgesaStatus;
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDGNBINITATENV, &EnvParams->StdHeader);
+
+ AGESA_TESTPOINT (TpIfAmdInitEnvExit, &EnvParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitEnv: End\n");
+ IDS_PERF_TIMESTAMP (TP_ENDPROCAMDINITENV, &EnvParams->StdHeader);
+ IDS_HDT_CONSOLE_FLUSH_BUFFER (&EnvParams->StdHeader);
+ return AmdInitEnvStatus;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitLate.c
new file mode 100644
index 0000000..92aeb47
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitLate.c
@@ -0,0 +1,323 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Interface
+ * @e \$Revision: 84514 $ @e \$Date: 2012-12-17 10:44:17 -0600 (Mon, 17 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionDmi.h"
+#include "OptionSlit.h"
+#include "cpuLateInit.h"
+#include "cpuFeatures.h"
+#include "CommonInits.h"
+#include "GnbInterface.h"
+#include "OptionPstate.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_COMMON_AMDINITLATE_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_DMI_CONFIGURATION OptionDmiConfiguration; // global user config record
+extern OPTION_SLIT_CONFIGURATION OptionSlitConfiguration; // global user config record
+extern OPTION_PSTATE_LATE_CONFIGURATION OptionPstateLateConfiguration;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdLatePlatformConfigInit (
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initialize AmdInitLate stage platform profile and user option input.
+ *
+ * @param[in,out] PlatformConfig Platform profile/build option config structure
+ * @param[in,out] StdHeader AMD standard header config param
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdLatePlatformConfigInit (
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CommonPlatformConfigInit (PlatformConfig, StdHeader);
+
+ return AGESA_SUCCESS;
+}
+
+/*
+ *---------------------------------------------------------------------------------------
+ *
+ * AmdInitLateInitializer
+ *
+ * Initializer routine that will be invoked by the wrapper
+ * to initialize the input structure for the AmdInitLate
+ *
+ * @param[in, out] IN OUT AMD_LATE_PARAMS *LateParamsPtr
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitLateInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_LATE_PARAMS *LateParamsPtr
+ )
+{
+ ASSERT (StdHeader != NULL);
+ ASSERT (LateParamsPtr != NULL);
+
+ LateParamsPtr->StdHeader = *StdHeader;
+
+ AmdLatePlatformConfigInit (&LateParamsPtr->PlatformConfig, &LateParamsPtr->StdHeader);
+ GnbInitDataStructAtLateDef (&LateParamsPtr->GnbLateConfiguration, LateParamsPtr);
+
+ LateParamsPtr->AcpiSlit = NULL;
+
+ LateParamsPtr->AcpiSrat = NULL;
+
+ LateParamsPtr->AcpiWheaMce = NULL;
+ LateParamsPtr->AcpiWheaCmc = NULL;
+
+ LateParamsPtr->AcpiPState = NULL;
+
+ LateParamsPtr->DmiTable = NULL;
+
+ LateParamsPtr->AcpiAlib = NULL;
+
+ LateParamsPtr->IvrsExclusionRangeList = UserOptions.CfgIvrsExclusionRangeList;
+
+ return AGESA_SUCCESS;
+}
+
+/*
+ *---------------------------------------------------------------------------------------
+ *
+ * AmdInitLateDestructor
+ *
+ * Destruct routine that provide a chance if something need to be done
+ * before the end of AmdInitLate.
+ *
+ * @param[in] StdHeader The standard header.
+ * @param[in] LateParamsPtr AMD init late param.
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitLateDestructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_LATE_PARAMS *LateParamsPtr
+ )
+{
+
+ ASSERT (LateParamsPtr != NULL);
+
+ (*(OptionDmiConfiguration.DmiReleaseBuffer)) (StdHeader);
+ (*(OptionSlitConfiguration.SlitReleaseBuffer)) (StdHeader);
+
+ return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_INIT_LATE function.
+ *
+ * This entry point is responsible for creating any desired ACPI tables, providing
+ * information for DMI, and to prepare the processors for the operating system
+ * bootstrap load process.
+ *
+ * @param[in,out] LateParams Required input parameters for the AMD_INIT_LATE
+ * entry point.
+ *
+ * @return Aggregated status across all internal AMD late calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdInitLate (
+ IN OUT AMD_LATE_PARAMS *LateParams
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS AmdInitLateStatus;
+
+ IDS_PERF_TIMESTAMP (TP_BEGINPROCAMDINITLATE, &LateParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdInitLate: Start\n\n");
+ AGESA_TESTPOINT (TpIfAmdInitLateEntry, &LateParams->StdHeader);
+
+ ASSERT (LateParams != NULL);
+ AmdInitLateStatus = AGESA_SUCCESS;
+
+ IDS_OPTION_HOOK (IDS_INIT_LATE_BEFORE, LateParams, &LateParams->StdHeader);
+
+ IDS_PERF_TIMESTAMP (TP_BEGINCREATSYSTEMTABLE, &LateParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "CreatSystemTable: Start\n");
+ // _PSS, XPSS, _PCT, _PSD, _PPC, _CST, _CSD Tables
+ if ((LateParams->PlatformConfig.UserOptionPState) || (IsFeatureEnabled (IoCstate, &LateParams->PlatformConfig, &LateParams->StdHeader))) {
+ AgesaStatus = ((*(OptionPstateLateConfiguration.SsdtFeature)) (&LateParams->StdHeader, &LateParams->PlatformConfig, &LateParams->AcpiPState));
+ if (AgesaStatus > AmdInitLateStatus) {
+ AmdInitLateStatus = AgesaStatus;
+ }
+ }
+
+ // CRAT Table Generation
+ if (LateParams->PlatformConfig.UserOptionCrat) {
+ AgesaStatus = CreateAcpiCrat (&LateParams->StdHeader, &LateParams->AcpiCrat);
+ if (AgesaStatus > AmdInitLateStatus) {
+ AmdInitLateStatus = AgesaStatus;
+ }
+ }
+
+ // CDIT Table Generation
+ if (LateParams->PlatformConfig.UserOptionCdit) {
+ AgesaStatus = CreateAcpiCdit (&LateParams->StdHeader, &LateParams->PlatformConfig, &LateParams->AcpiCdit);
+ if (AgesaStatus > AmdInitLateStatus) {
+ AmdInitLateStatus = AgesaStatus;
+ }
+ }
+
+ // SRAT Table Generation
+ if (LateParams->PlatformConfig.UserOptionSrat) {
+ AgesaStatus = CreateAcpiSrat (&LateParams->StdHeader, &LateParams->AcpiSrat);
+ if (AgesaStatus > AmdInitLateStatus) {
+ AmdInitLateStatus = AgesaStatus;
+ }
+ }
+
+ // SLIT Table Generation
+ if (LateParams->PlatformConfig.UserOptionSlit) {
+ AgesaStatus = CreateAcpiSlit (&LateParams->StdHeader, &LateParams->PlatformConfig, &LateParams->AcpiSlit);
+ if (AgesaStatus > AmdInitLateStatus) {
+ AmdInitLateStatus = AgesaStatus;
+ }
+ }
+
+ // WHEA Table Generation
+ if (LateParams->PlatformConfig.UserOptionWhea) {
+ AgesaStatus = CreateAcpiWhea (&LateParams->StdHeader, &LateParams->AcpiWheaMce, &LateParams->AcpiWheaCmc);
+ if (AgesaStatus > AmdInitLateStatus) {
+ AmdInitLateStatus = AgesaStatus;
+ }
+ }
+
+ // DMI Table Generation
+ if (LateParams->PlatformConfig.UserOptionDmi) {
+ AgesaStatus = CreateDmiRecords (&LateParams->StdHeader, &LateParams->DmiTable);
+ if (AgesaStatus > AmdInitLateStatus) {
+ AmdInitLateStatus = AgesaStatus;
+ }
+ }
+ IDS_HDT_CONSOLE (MAIN_FLOW, "CreatSystemTable: End\n");
+ IDS_PERF_TIMESTAMP (TP_ENDCREATSYSTEMTABLE, &LateParams->StdHeader);
+
+ // Cpu Features
+ IDS_PERF_TIMESTAMP (TP_BEGINDISPATCHCPUFEATURESLATE, &LateParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "DispatchCpuFeatures: LateStart\n");
+ AgesaStatus = DispatchCpuFeatures (CPU_FEAT_INIT_LATE_END, &LateParams->PlatformConfig, &LateParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "DispatchCpuFeatures: LateEnd\n");
+ if (AgesaStatus > AmdInitLateStatus) {
+ AmdInitLateStatus = AgesaStatus;
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDDISPATCHCPUFEATURESLATE, &LateParams->StdHeader);
+
+ // It is the last function run by the AGESA CPU module and prepares the processor
+ // for the operating system bootstrap load process.
+ IDS_PERF_TIMESTAMP (TP_BEGINAMDCPULATE, &LateParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdCpuLate: Start\n");
+ AgesaStatus = AmdCpuLate (&LateParams->StdHeader, &LateParams->PlatformConfig);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdCpuLate: End\n");
+ if (AgesaStatus > AmdInitLateStatus) {
+ AmdInitLateStatus = AgesaStatus;
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDAMDCPULATE, &LateParams->StdHeader);
+
+ IDS_PERF_TIMESTAMP (TP_BEGINGNBINITATLATE, &LateParams->StdHeader);
+ AgesaStatus = GnbInitAtLate (LateParams);
+ if (AgesaStatus > AmdInitLateStatus) {
+ AmdInitLateStatus = AgesaStatus;
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDGNBINITATLATE, &LateParams->StdHeader);
+
+ IDS_OPTION_HOOK (IDS_INIT_LATE_AFTER, LateParams, &LateParams->StdHeader);
+ AGESA_TESTPOINT (TpIfAmdInitLateExit, &LateParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitLate: End\n\n");
+ AGESA_TESTPOINT (EndAgesaTps, &LateParams->StdHeader);
+//End Debug Print Service
+ IDS_HDT_CONSOLE_EXIT (&LateParams->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_ENDPROCAMDINITLATE, &LateParams->StdHeader);
+ IDS_PERF_ANALYSE (&LateParams->StdHeader);
+
+ return AmdInitLateStatus;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitMid.c
new file mode 100644
index 0000000..2bd4034
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitMid.c
@@ -0,0 +1,178 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Interface
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuFeatures.h"
+#include "CommonInits.h"
+#include "GnbInterface.h"
+#include "AmdFch.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_COMMON_AMDINITMID_FILECODE
+
+extern BLDOPT_FCH_FUNCTION BldoptFchFunction;
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*
+ *---------------------------------------------------------------------------------------
+ *
+ * Initializer routine that will be invoked by the wrapper
+ * to initialize the input structure for the AmdInitMid
+ *
+ * @param[in,out] MidParamsPtr Newly created interface parameters for AmdInitMid
+ *
+ * @retval AGESA_SUCCESS Always succeeds
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitMidInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_MID_PARAMS *MidParamsPtr
+ )
+{
+ ASSERT (StdHeader != NULL);
+ ASSERT (MidParamsPtr != NULL);
+
+ MidParamsPtr->StdHeader = *StdHeader;
+ CommonPlatformConfigInit (&MidParamsPtr->PlatformConfig, &MidParamsPtr->StdHeader);
+ BldoptFchFunction.InitMidConstructor (MidParamsPtr);
+ GnbInitDataStructAtMidDef (&MidParamsPtr->GnbMidConfiguration, MidParamsPtr);
+
+ return AGESA_SUCCESS;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_INIT_MID function.
+ *
+ * This entry point is responsible for performing any necessary functions needed
+ * after PCI bus enumeration and just before control is passed to the video option ROM.
+ *
+ * @param[in,out] MidParams Required input parameters for the AMD_INIT_MID
+ * entry point.
+ *
+ * @return Aggregated status across all internal AMD mid calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdInitMid (
+ IN OUT AMD_MID_PARAMS *MidParams
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS CalledStatus;
+
+ IDS_PERF_TIMESTAMP (TP_BEGINPROCAMDINITMID, &MidParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdInitMid: Start\n\n");
+ AGESA_TESTPOINT (TpIfAmdInitMidEntry, &MidParams->StdHeader);
+
+ AgesaStatus = AGESA_SUCCESS;
+
+ ASSERT (MidParams != NULL);
+ IDS_OPTION_HOOK (IDS_INIT_MID_BEFORE, MidParams, &MidParams->StdHeader);
+
+ IDS_PERF_TIMESTAMP (TP_BEGINDISPATCHCPUFEATURESMID, &MidParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "DispatchCpuFeatures: MidStart\n");
+ CalledStatus = DispatchCpuFeatures (CPU_FEAT_INIT_MID_END, &MidParams->PlatformConfig, &MidParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "DispatchCpuFeatures: MidEnd\n");
+ if (CalledStatus > AgesaStatus) {
+ AgesaStatus = CalledStatus;
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDDISPATCHCPUFEATURESMID, &MidParams->StdHeader);
+
+ IDS_PERF_TIMESTAMP (TP_BEGININITMID, &MidParams->StdHeader);
+ CalledStatus = BldoptFchFunction.InitMid (MidParams);
+ AgesaStatus = (CalledStatus > AgesaStatus) ? CalledStatus : AgesaStatus;
+ IDS_PERF_TIMESTAMP (TP_ENDINITMID, &MidParams->StdHeader);
+
+ IDS_PERF_TIMESTAMP (TP_BEGINGNBINITATMID, &MidParams->StdHeader);
+ CalledStatus = GnbInitAtMid (MidParams);
+ if (CalledStatus > AgesaStatus) {
+ AgesaStatus = CalledStatus;
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDGNBINITATMID, &MidParams->StdHeader);
+
+ IDS_OPTION_HOOK (IDS_INIT_MID_AFTER, MidParams, &MidParams->StdHeader);
+
+ AGESA_TESTPOINT (TpIfAmdInitMidExit, &MidParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitMid: End\n\n");
+ IDS_HDT_CONSOLE_FLUSH_BUFFER (&MidParams->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_ENDPROCAMDINITMID, &MidParams->StdHeader);
+
+ return AgesaStatus;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitPost.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitPost.c
new file mode 100644
index 0000000..842b159
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitPost.c
@@ -0,0 +1,349 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Interface
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mm.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuPostInit.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CommonInits.h"
+#include "cpuServices.h"
+#include "GnbInterface.h"
+#include "Filecode.h"
+#include "CreateStruct.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_COMMON_AMDINITPOST_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdPostPlatformConfigInit (
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initialize AmdInitPost stage platform profile and user option input.
+ *
+ * @param[in,out] PlatformConfig Platform profile/build option config structure
+ * @param[in,out] StdHeader AMD standard header config param
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdPostPlatformConfigInit (
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CommonPlatformConfigInit (PlatformConfig, StdHeader);
+
+ return AGESA_SUCCESS;
+}
+
+/*
+ *---------------------------------------------------------------------------------------
+ *
+ * AmdInitPostInitializer
+ *
+ * Initializer routine that will be invoked by the wrapper
+ * to initialize the input structure for the AmdInitPost
+ *
+ * @param[in, out] IN OUT AMD_POST_PARAMS *PostParamsPtr
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitPostInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_POST_PARAMS *PostParamsPtr
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ ASSERT (StdHeader != NULL);
+ ASSERT (PostParamsPtr != NULL);
+
+ PostParamsPtr->StdHeader = *StdHeader;
+
+ AllocHeapParams.RequestedBufferSize = sizeof (MEM_DATA_STRUCT);
+ AllocHeapParams.BufferHandle = AMD_MEM_DATA_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ AgesaStatus = HeapAllocateBuffer (&AllocHeapParams, &PostParamsPtr->StdHeader);
+
+ if (AgesaStatus == AGESA_SUCCESS) {
+ PostParamsPtr->MemConfig.MemData = (MEM_DATA_STRUCT *) AllocHeapParams.BufferPtr;
+ PostParamsPtr->MemConfig.MemData->ParameterListPtr = &(PostParamsPtr->MemConfig);
+ AmdPostPlatformConfigInit (&PostParamsPtr->PlatformConfig, &PostParamsPtr->StdHeader);
+ AmdMemInitDataStructDef (PostParamsPtr->MemConfig.MemData, &PostParamsPtr->PlatformConfig);
+ GnbInitDataStructAtPostDef (&PostParamsPtr->GnbPostConfig, PostParamsPtr);
+ }
+ return AgesaStatus;
+}
+
+/*
+ *---------------------------------------------------------------------------------------
+ *
+ * AmdInitPostDestructor
+ *
+ * Destruct routine that provide a chance if something need to be done
+ * before the end of AmdInitPost.
+ *
+ * @param[in] StdHeader The standard header.
+ * @param[in] PostParamsPtr AMD init post param.
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitPostDestructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_POST_PARAMS *PostParamsPtr
+ )
+{
+
+ ASSERT (PostParamsPtr != NULL);
+
+ PostParamsPtr->StdHeader = *StdHeader;
+ PostParamsPtr->MemConfig.MemData->StdHeader = *StdHeader;
+
+ //
+ // AmdMemAuto completed. Here, release heap space which is used for memory init.
+ //
+ MemAmdFinalize (PostParamsPtr->MemConfig.MemData);
+ HeapDeallocateBuffer (AMD_MEM_DATA_HANDLE, StdHeader);
+
+ //
+ // AmdCpuPost completed.
+ //
+ if (PostParamsPtr->MemConfig.SysLimit != 0) {
+ // WBINVD can only be executed when memory is available
+ FinalizeAtPost (StdHeader);
+ }
+
+ return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_INIT_POST function.
+ *
+ * This entry point is responsible for initializing all system memory,
+ * gathering important data out of the pre-memory cache storage into a
+ * temporary holding buffer in main memory. After that APs will be
+ * shutdown in preparation for the host environment to take control.
+ * Note: pre-memory stack will be disabled also.
+ *
+ * @param[in,out] PostParams Required input parameters for the AMD_INIT_POST
+ * entry point.
+ *
+ * @return Aggregated status across all internal AMD POST calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdInitPost (
+ IN OUT AMD_POST_PARAMS *PostParams
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS AmdInitPostStatus;
+ WARM_RESET_REQUEST Request;
+ UINT8 PrevRequestBit;
+ UINT8 PrevStateBits;
+
+ IDS_PERF_TIMESTAMP (TP_BEGINPROCAMDINITPOST, &PostParams->StdHeader);
+ AGESA_TESTPOINT (TpIfAmdInitPostEntry, &PostParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdInitPost: Start\n\n");
+
+ ASSERT (PostParams != NULL);
+ AmdInitPostStatus = AGESA_SUCCESS;
+ PrevRequestBit = FALSE;
+ PrevStateBits = WR_STATE_COLD;
+
+ IDS_OPTION_HOOK (IDS_INIT_POST_BEFORE, PostParams, &PostParams->StdHeader);
+
+ // If a previously requested warm reset cannot be triggered in the
+ // current stage, store the previous state of request and reset the
+ // request struct to the current post stage
+ GetWarmResetFlag (&PostParams->StdHeader, &Request);
+ if (Request.RequestBit == TRUE) {
+ if (Request.StateBits >= Request.PostStage) {
+ PrevRequestBit = Request.RequestBit;
+ PrevStateBits = Request.StateBits;
+ Request.RequestBit = FALSE;
+ Request.StateBits = Request.PostStage - 1;
+ SetWarmResetFlag (&PostParams->StdHeader, &Request);
+ }
+ }
+
+ IDS_PERF_TIMESTAMP (TP_BEGINGNBINITATPOST, &PostParams->StdHeader);
+ AgesaStatus = GnbInitAtPost (PostParams);
+ if (AgesaStatus > AmdInitPostStatus) {
+ AmdInitPostStatus = AgesaStatus;
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDGNBINITATPOST, &PostParams->StdHeader);
+
+ IDS_PERF_TIMESTAMP (TP_BEGINAMDMEMAUTO, &PostParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdMemAuto: Start\n");
+ PostParams->MemConfig.MemData->StdHeader = PostParams->StdHeader;
+ AgesaStatus = AmdMemAuto (PostParams->MemConfig.MemData);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdMemAuto: End\n");
+ if (AgesaStatus > AmdInitPostStatus) {
+ AmdInitPostStatus = AgesaStatus;
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDAMDMEMAUTO, &PostParams->StdHeader);
+
+ if (AgesaStatus != AGESA_FATAL) {
+ // Check BIST status
+ AgesaStatus = CheckBistStatus (&PostParams->StdHeader);
+ if (AgesaStatus > AmdInitPostStatus) {
+ AmdInitPostStatus = AgesaStatus;
+ }
+
+ //
+ // P-State data gathered, then, Relinquish APs
+ //
+ IDS_PERF_TIMESTAMP (TP_BEGINAMDCPUPOST, &PostParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdCpuPost: Start\n");
+ AgesaStatus = AmdCpuPost (&PostParams->StdHeader, &PostParams->PlatformConfig);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdCpuPost: End\n");
+ if (AgesaStatus > AmdInitPostStatus) {
+ AmdInitPostStatus = AgesaStatus;
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDAMDCPUPOST, &PostParams->StdHeader);
+
+ // Warm Reset
+ GetWarmResetFlag (&PostParams->StdHeader, &Request);
+ // If a warm reset is requested in the current post stage, trigger the
+ // warm reset and ignore the previous request
+ if (Request.RequestBit == TRUE) {
+ if (Request.StateBits < Request.PostStage) {
+ AgesaDoReset (WARM_RESET_WHENEVER, &PostParams->StdHeader);
+ }
+ } else {
+ // Otherwise, if there's a previous request, restore it
+ // so that the subsequent post stage can trigger the warm reset
+ if (PrevRequestBit == TRUE) {
+ Request.RequestBit = PrevRequestBit;
+ Request.StateBits = PrevStateBits;
+ SetWarmResetFlag (&PostParams->StdHeader, &Request);
+ }
+ }
+
+ IDS_PERF_TIMESTAMP (TP_BEGINGNBINITATPOSTAFTERDRAM, &PostParams->StdHeader);
+ AgesaStatus = GnbInitAtPostAfterDram (PostParams);
+ if (AgesaStatus > AmdInitPostStatus) {
+ AmdInitPostStatus = AgesaStatus;
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDGNBINITATPOSTAFTERDRAM, &PostParams->StdHeader);
+
+ IDS_OPTION_HOOK (IDS_INIT_POST_AFTER, PostParams, &PostParams->StdHeader);
+
+ AGESA_TESTPOINT (TpIfAmdInitPostExit, &PostParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitPost: End\n\n");
+ IDS_HDT_CONSOLE (MAIN_FLOW, "Heap transfer Start ...\n\n");
+
+ //For Heap will be relocate to new address in next stage, flush out debug print buffer if needed
+ IDS_HDT_CONSOLE_FLUSH_BUFFER (&PostParams->StdHeader);
+
+ // WARNING: IDT will be moved from local cache to temp memory, so restore IDTR for BSP here
+ IDS_EXCEPTION_TRAP (IDS_IDT_RESTORE_IDTR_FOR_BSC, NULL, &PostParams->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_ENDPROCAMDINITPOST, &PostParams->StdHeader);
+
+ // Copies BSP heap content to RAM, and it should be at the end of AmdInitPost
+ AgesaStatus = CopyHeapToTempRamAtPost (&(PostParams->StdHeader));
+ if (AgesaStatus > AmdInitPostStatus) {
+ AmdInitPostStatus = AgesaStatus;
+ }
+ PostParams->StdHeader.HeapStatus = HEAP_TEMP_MEM;
+ }
+ // Check for Cache As Ram Corruption
+ IDS_CAR_CORRUPTION_CHECK (&PostParams->StdHeader);
+
+ // At the end of AmdInitPost, set StateBits to POST to allow any warm reset that occurs outside
+ // of AGESA to be recognized by IsWarmReset()
+ GetWarmResetFlag (&PostParams->StdHeader, &Request);
+ Request.StateBits = Request.PostStage;
+ SetWarmResetFlag (&PostParams->StdHeader, &Request);
+
+ return AmdInitPostStatus;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitReset.c
new file mode 100644
index 0000000..30e194e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitReset.c
@@ -0,0 +1,257 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Interface
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuCacheInit.h"
+#include "cpuServices.h"
+#include "AdvancedApi.h"
+#include "GeneralServices.h"
+#include "OptionsHt.h"
+#include "AmdFch.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_COMMON_AMDINITRESET_FILECODE
+
+extern BLDOPT_FCH_FUNCTION BldoptFchFunction;
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST OPTION_HT_INIT_RESET HtOptionInitReset;
+extern BUILD_OPT_CFG UserOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdInitResetExecutionCacheAllocateInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN EXECUTION_CACHE_REGION *AmdExeAddrMapPtr
+ );
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initializer routine that will be invoked by the wrapper to initialize the input
+ * structure for the AllocateExecutionCache.
+ *
+ * Parameters:
+ * @param[in] StdHeader Opaque handle to standard config header
+ * @param[in] AmdExeAddrMapPtr Our Service interface struct
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdInitResetExecutionCacheAllocateInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN EXECUTION_CACHE_REGION *AmdExeAddrMapPtr
+ )
+{
+ ASSERT (AmdExeAddrMapPtr != NULL);
+
+ LibAmdMemFill (AmdExeAddrMapPtr, 0, sizeof (EXECUTION_CACHE_REGION) * MAX_CACHE_REGIONS, StdHeader);
+
+ return AGESA_SUCCESS;
+}
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_INIT_RESET function.
+ *
+ * This entry point is responsible for establishing the HT links to the program
+ * ROM and for performing basic processor initialization.
+ *
+ * @param[in,out] ResetParams Required input parameters for the AMD_INIT_RESET
+ * entry point.
+ *
+ * @return Aggregated status across all internal AMD reset calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdInitReset (
+ IN OUT AMD_RESET_PARAMS *ResetParams
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS CalledAgesaStatus;
+ WARM_RESET_REQUEST Request;
+ UINT8 PrevRequestBit;
+ UINT8 PrevStateBits;
+
+ IDS_PERF_TIMESTAMP (TP_BEGINPROCAMDINITRESET, &ResetParams->StdHeader);
+ AgesaStatus = AGESA_SUCCESS;
+
+ // Setup ROM execution cache
+ CalledAgesaStatus = AllocateExecutionCache (&ResetParams->StdHeader, &ResetParams->CacheRegion[0]);
+ if (CalledAgesaStatus > AgesaStatus) {
+ AgesaStatus = CalledAgesaStatus;
+ }
+
+
+ // Init Debug Print function
+ IDS_HDT_CONSOLE_INIT (&ResetParams->StdHeader);
+
+ IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitReset: Start\n\n");
+
+ IDS_HDT_CONSOLE (MAIN_FLOW, "\n*** %s ***\n\n", &UserOptions.VersionString);
+
+ AGESA_TESTPOINT (TpIfAmdInitResetEntry, &ResetParams->StdHeader);
+ ASSERT (ResetParams != NULL);
+
+ PrevRequestBit = FALSE;
+ PrevStateBits = WR_STATE_COLD;
+
+ IDS_PERF_TIMESTAMP (TP_BEGININITRESET, &ResetParams->StdHeader);
+ if (IsBsp (&ResetParams->StdHeader, &AgesaStatus)) {
+ CalledAgesaStatus = BldoptFchFunction.InitReset (ResetParams);
+ AgesaStatus = (CalledAgesaStatus > AgesaStatus) ? CalledAgesaStatus : AgesaStatus;
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDINITRESET, &ResetParams->StdHeader);
+
+ // If a previously requested warm reset cannot be triggered in the
+ // current stage, store the previous state of request and reset the
+ // request struct to the current post stage
+ GetWarmResetFlag (&ResetParams->StdHeader, &Request);
+ if (Request.RequestBit == TRUE) {
+ if (Request.StateBits >= Request.PostStage) {
+ PrevRequestBit = Request.RequestBit;
+ PrevStateBits = Request.StateBits;
+ Request.RequestBit = FALSE;
+ Request.StateBits = Request.PostStage - 1;
+ SetWarmResetFlag (&ResetParams->StdHeader, &Request);
+ }
+ }
+
+ // Initialize the PCI MMIO access mechanism
+ InitializePciMmio (&ResetParams->StdHeader);
+
+ IDS_PERF_TIMESTAMP (TP_BEGINHTINITRESET, &ResetParams->StdHeader);
+ // Initialize Hyper Transport Registers
+ if (HtOptionInitReset.HtInitReset != NULL) {
+ IDS_HDT_CONSOLE (MAIN_FLOW, "HtInitReset: Start\n");
+ CalledAgesaStatus = HtOptionInitReset.HtInitReset (&ResetParams->StdHeader, &ResetParams->HtConfig);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "HtInitReset: End\n");
+ if (CalledAgesaStatus > AgesaStatus) {
+ AgesaStatus = CalledAgesaStatus;
+ }
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDHTINITRESET, &ResetParams->StdHeader);
+
+ // Warm Reset, should be at the end of AmdInitReset
+ GetWarmResetFlag (&ResetParams->StdHeader, &Request);
+ // If a warm reset is requested in the current post stage, trigger the
+ // warm reset and ignore the previous request
+ if (Request.RequestBit == TRUE) {
+ if (Request.StateBits < Request.PostStage) {
+ AgesaDoReset (WARM_RESET_WHENEVER, &ResetParams->StdHeader);
+ }
+ } else {
+ // Otherwise, if there's a previous request, restore it
+ // so that the subsequent post stage can trigger the warm reset
+ if (PrevRequestBit == TRUE) {
+ Request.RequestBit = PrevRequestBit;
+ Request.StateBits = PrevStateBits;
+ SetWarmResetFlag (&ResetParams->StdHeader, &Request);
+ }
+ }
+ // Check for Cache As Ram Corruption
+ IDS_CAR_CORRUPTION_CHECK (&ResetParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdInitReset: End\n\n");
+
+ AGESA_TESTPOINT (TpIfAmdInitResetExit, &ResetParams->StdHeader);
+
+ IDS_PERF_TIMESTAMP (TP_ENDPROCAMDINITRESET, &ResetParams->StdHeader);
+
+ return AgesaStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Initialize defaults and options for Amd Init Reset.
+ *
+ * @param[in] StdHeader Header
+ * @param[in] AmdResetParams The Reset Init interface to initialize.
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ */
+AGESA_STATUS
+AmdInitResetConstructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_RESET_PARAMS *AmdResetParams
+ )
+{
+ ASSERT (AmdResetParams != NULL);
+
+ AmdResetParams->StdHeader = *StdHeader;
+
+ AmdInitResetExecutionCacheAllocateInitializer (&AmdResetParams->StdHeader, &AmdResetParams->CacheRegion[0]);
+ // Initialize Hyper Transport input structure
+ if (HtOptionInitReset.HtResetConstructor != NULL) {
+ HtOptionInitReset.HtResetConstructor (&AmdResetParams->StdHeader, &AmdResetParams->HtConfig);
+ }
+ BldoptFchFunction.InitResetConstructor (AmdResetParams);
+
+ return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitResume.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitResume.c
new file mode 100644
index 0000000..77dfdfc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitResume.c
@@ -0,0 +1,245 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Interface
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "Filecode.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "cpuPostInit.h"
+#include "CommonInits.h"
+#include "cpuFeatures.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_COMMON_AMDINITRESUME_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_INIT_RESUME function.
+ *
+ * This entry point is responsible for performing silicon device and memory
+ * re-initialization for the resume boot path.
+ *
+ * @param[in] ResumeParams Required input parameters for the AMD_INIT_RESUME
+ * entry point.
+ *
+ * @return Aggregated status across all internal AMD resume calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdInitResume (
+ IN AMD_RESUME_PARAMS *ResumeParams
+ )
+{
+ VOID *OrMaskPtr;
+ AGESA_STATUS ReturnStatus;
+ AGESA_STATUS AmdInitResumeStatus;
+ BSC_AP_MSR_SYNC ApMsrSync[4];
+
+ IDS_PERF_TIMESTAMP (TP_BEGINPROCAMDINITRESUME, &ResumeParams->StdHeader);
+ AGESA_TESTPOINT (TpIfAmdInitResumeEntry, &ResumeParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdInitResume Start\n");
+
+ AmdInitResumeStatus = AGESA_SUCCESS;
+
+ ASSERT (ResumeParams != NULL);
+
+ if (ResumeParams->S3DataBlock.NvStorage != NULL) {
+ IDS_PERF_TIMESTAMP (TP_BEGINAMDMEMS3RESUME, &ResumeParams->StdHeader);
+
+ MemS3ResumeInitNB (&ResumeParams->StdHeader);
+
+ // Restore registers before exiting self refresh
+ RestorePreESRContext (&OrMaskPtr,
+ ResumeParams->S3DataBlock.NvStorage,
+ INIT_RESUME,
+ &ResumeParams->StdHeader);
+ // Exit self refresh
+ ReturnStatus = AmdMemS3Resume (&ResumeParams->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_ENDAMDMEMS3RESUME, &ResumeParams->StdHeader);
+ if (ReturnStatus > AmdInitResumeStatus) {
+ AmdInitResumeStatus = ReturnStatus;
+ }
+ if (ReturnStatus == AGESA_SUCCESS) {
+
+ // Restore registers after exiting self refresh
+ RestorePostESRContext (OrMaskPtr,
+ ResumeParams->S3DataBlock.NvStorage,
+ INIT_RESUME,
+ &ResumeParams->StdHeader);
+
+ ApMsrSync[0].RegisterAddress = SYS_CFG;
+ ApMsrSync[1].RegisterAddress = TOP_MEM;
+ ApMsrSync[2].RegisterAddress = TOP_MEM2;
+ ApMsrSync[3].RegisterAddress = 0;
+ SyncApMsrsToBsc (ApMsrSync, &ResumeParams->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_BEGINDISPATCHCPUFEATURESS3RESUME, &ResumeParams->StdHeader);
+
+ IDS_HDT_CONSOLE (CPU_TRACE, " Dispatch CPU features after S3 AP MTRR sync\n");
+ ReturnStatus = DispatchCpuFeatures (CPU_FEAT_AFTER_RESUME_MTRR_SYNC, &ResumeParams->PlatformConfig, &ResumeParams->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_ENDDISPATCHCPUFEATURESS3RESUME, &ResumeParams->StdHeader);
+ if (ReturnStatus > AmdInitResumeStatus) {
+ AmdInitResumeStatus = ReturnStatus;
+ }
+ }
+ }
+
+ IDS_OPTION_HOOK (IDS_AFTER_S3_RESUME, NULL, &ResumeParams->StdHeader);
+
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdInitResume End\n");
+
+ // HDT out of All Aps
+ IDS_HDT_CONSOLE_FLUSH_BUFFER (&ResumeParams->StdHeader);
+ // Relinquish control of all APs to IBV
+ RelinquishControlOfAllAPs (&ResumeParams->StdHeader);
+
+ // Restore IDT
+ IDS_EXCEPTION_TRAP (IDS_IDT_RESTORE_IDTR_FOR_BSC, NULL, &ResumeParams->StdHeader);
+ AGESA_TESTPOINT (TpIfAmdInitResumeExit, &ResumeParams->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_ENDPROCAMDINITRESUME, &ResumeParams->StdHeader);
+ IDS_PERF_ANALYSE (&ResumeParams->StdHeader);
+
+ return (AmdInitResumeStatus);
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Constructor for the AMD_INIT_RESUME function.
+ *
+ * This routine is responsible for setting default values for the
+ * input parameters needed by the AMD_INIT_RESUME entry point.
+ *
+ * @param[in] StdHeader The standard header.
+ * @param[in,out] ResumeParams Required input parameters for the AMD_INIT_RESUME
+ * entry point.
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdInitResumeInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_RESUME_PARAMS *ResumeParams
+ )
+{
+ ASSERT (StdHeader != NULL);
+ ASSERT (ResumeParams != NULL);
+
+ ResumeParams->StdHeader = *StdHeader;
+
+ AmdS3ParamsInitializer (&ResumeParams->S3DataBlock);
+ CommonPlatformConfigInit (&ResumeParams->PlatformConfig, &ResumeParams->StdHeader);
+
+ return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Destructor for the AMD_INIT_RESUME function.
+ *
+ * This routine is responsible for deallocation of heap space allocated during
+ * AMD_INIT_RESUME entry point.
+ *
+ * @param[in] StdHeader The standard header.
+ * @param[in,out] ResumeParams Required input parameters for the AMD_INIT_RESUME
+ * entry point.
+ *
+ * @retval AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+AmdInitResumeDestructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_RESUME_PARAMS *ResumeParams
+ )
+{
+ AGESA_STATUS ReturnStatus;
+ AGESA_STATUS RetVal;
+
+ ASSERT (ResumeParams != NULL);
+
+ ReturnStatus = AGESA_SUCCESS;
+
+ // Deallocate heap space allocated during memory S3 resume
+ RetVal = MemS3Deallocate (&ResumeParams->StdHeader);
+ if (RetVal > ReturnStatus) {
+ ReturnStatus = RetVal;
+ }
+
+ return ReturnStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdLateRunApTask.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdLateRunApTask.c
new file mode 100644
index 0000000..b7e125e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdLateRunApTask.c
@@ -0,0 +1,159 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Interface
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Options.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_COMMON_AMDLATERUNAPTASK_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST DISPATCH_TABLE ApDispatchTable[];
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Application Processor perform a function as directed by the BSC.
+ *
+ * This is needed for an AP task that must run after AGESA has relinquished control
+ * of the APs to the IBV.
+ *
+ * @param[in] AmdApExeParams The interface struct for any required routine.
+ *
+ * @return The most severe AGESA_STATUS returned by any called service. Note
+ * that this will be the return value passed back to the BSC as the
+ * return value for the call out.
+ *
+ */
+AGESA_STATUS
+AmdLateRunApTask (
+ IN AP_EXE_PARAMS *AmdApExeParams
+ )
+{
+ AGESA_STATUS CalledAgesaStatus;
+ AGESA_STATUS ApLateTaskStatus;
+ DISPATCH_TABLE *Entry;
+
+ AGESA_TESTPOINT (TpIfAmdLateRunApTaskEntry, &AmdApExeParams->StdHeader);
+
+ ASSERT (AmdApExeParams != NULL);
+ ApLateTaskStatus = AGESA_SUCCESS;
+ CalledAgesaStatus = AGESA_UNSUPPORTED;
+
+ // Dispatch, if valid
+ Entry = (DISPATCH_TABLE *) ApDispatchTable;
+ while (Entry->FunctionId != 0) {
+ if (AmdApExeParams->FunctionNumber == Entry->FunctionId) {
+ CalledAgesaStatus = Entry->EntryPoint (AmdApExeParams);
+ break;
+ }
+ Entry++;
+ }
+
+ if (CalledAgesaStatus > ApLateTaskStatus) {
+ ApLateTaskStatus = CalledAgesaStatus;
+ }
+
+ AGESA_TESTPOINT (TpIfAmdLateRunApTaskExit, &AmdApExeParams->StdHeader);
+ return ApLateTaskStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Constructor for the AMD_LATE_RUN_AP_TASK function.
+ *
+ * This routine is responsible for setting default values for the
+ * input parameters needed by the AMD_S3_SAVE entry point.
+ *
+ * @param[in] StdHeader The standard header.
+ * @param[in,out] AmdApExeParams Required input parameters for the AMD_LATE_RUN_AP_TASK
+ * entry point.
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdLateRunApTaskInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AP_EXE_PARAMS *AmdApExeParams
+ )
+{
+ ASSERT (StdHeader != NULL);
+ ASSERT (AmdApExeParams != NULL);
+
+ AmdApExeParams->StdHeader = *StdHeader;
+ AmdApExeParams->FunctionNumber = 0;
+ AmdApExeParams->RelatedDataBlock = NULL;
+ AmdApExeParams->RelatedBlockLength = 0;
+ return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdS3LateRestore.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdS3LateRestore.c
new file mode 100644
index 0000000..5b30e55
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdS3LateRestore.c
@@ -0,0 +1,217 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Interface
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "S3.h"
+#include "cpuFeatures.h"
+#include "S3SaveState.h"
+#include "CommonInits.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_COMMON_AMDS3LATERESTORE_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdS3LateRestorePlatformConfigInit (
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_S3LATE_RESTORE function.
+ *
+ * This entry point is responsible for restoring saved registers and preparing the
+ * silicon components for OS restart.
+ *
+ * @param[in,out] S3LateParams Required input parameters for the AMD_S3LATE_RESTORE
+ * entry point.
+ *
+ * @return Aggregated status across all internal AMD S3 late restore calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdS3LateRestore (
+ IN OUT AMD_S3LATE_PARAMS *S3LateParams
+ )
+{
+ UINT8 *BufferPointer;
+ VOID *OrMaskPtr;
+ VOID *LateContextPtr;
+ AGESA_STATUS ReturnStatus;
+ AGESA_STATUS CalledStatus;
+
+ AGESA_TESTPOINT (TpIfAmdS3LateRestoreEntry, &S3LateParams->StdHeader);
+
+ ReturnStatus = AGESA_SUCCESS;
+
+ ASSERT (S3LateParams != NULL);
+
+ BufferPointer = (UINT8 *) S3LateParams->S3DataBlock.VolatileStorage;
+ S3LateParams->StdHeader.HeapBasePtr = (UINT32) &BufferPointer[((S3_VOLATILE_STORAGE_HEADER *) S3LateParams->S3DataBlock.VolatileStorage)->HeapOffset];
+ ASSERT (S3LateParams->StdHeader.HeapBasePtr != 0);
+
+ IDS_HDT_CONSOLE_INIT (&S3LateParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "AmdS3LateRestore: Start\n\n");
+
+ IDS_OPTION_HOOK (IDS_PLATFORMCFG_OVERRIDE, &S3LateParams->PlatformConfig, &S3LateParams->StdHeader);
+ IDS_OPTION_HOOK (IDS_BEFORE_S3_RESTORE, S3LateParams, &(S3LateParams->StdHeader));
+
+ if (((S3_VOLATILE_STORAGE_HEADER *) S3LateParams->S3DataBlock.VolatileStorage)->RegisterDataSize != 0) {
+ LateContextPtr = &BufferPointer[((S3_VOLATILE_STORAGE_HEADER *) S3LateParams->S3DataBlock.VolatileStorage)->RegisterDataOffset];
+ // Restore registers before exiting self refresh
+ RestorePreESRContext (&OrMaskPtr,
+ LateContextPtr,
+ S3_LATE_RESTORE,
+ &S3LateParams->StdHeader);
+ // Restore registers after exiting self refresh
+ RestorePostESRContext (OrMaskPtr,
+ LateContextPtr,
+ S3_LATE_RESTORE,
+ &S3LateParams->StdHeader);
+ }
+
+ // Dispatch any features needing to run at this time point
+ IDS_HDT_CONSOLE (CPU_TRACE, " Dispatch CPU features at S3 late restore end\n");
+ CalledStatus = DispatchCpuFeatures (CPU_FEAT_S3_LATE_RESTORE_END,
+ &S3LateParams->PlatformConfig,
+ &S3LateParams->StdHeader);
+ if (CalledStatus > ReturnStatus) {
+ ReturnStatus = CalledStatus;
+ }
+
+ CalledStatus = S3ScriptRestore (&S3LateParams->StdHeader);
+ if (CalledStatus > ReturnStatus) {
+ ReturnStatus = CalledStatus;
+ }
+
+ IDS_OPTION_HOOK (IDS_AFTER_S3_RESTORE, S3LateParams, &S3LateParams->StdHeader);
+ AGESA_TESTPOINT (TpIfAmdS3LateRestoreExit, &S3LateParams->StdHeader);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "\nAmdS3LateRestore: End\n\n");
+ IDS_HDT_CONSOLE_S3_EXIT (&S3LateParams->StdHeader);
+ return ReturnStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Constructor for the AMD_S3LATE_RESTORE function.
+ *
+ * This routine is responsible for setting default values for the
+ * input parameters needed by the AMD_S3LATE_RESTORE entry point.
+ *
+ * @param[in] StdHeader AMD standard header config param.
+ * @param[in,out] S3LateParams Required input parameters for the
+ * AMD_S3LATE_RESTORE entry point.
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdS3LateRestoreInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_S3LATE_PARAMS *S3LateParams
+ )
+{
+ ASSERT (StdHeader != NULL);
+ ASSERT (S3LateParams != NULL);
+
+ S3LateParams->StdHeader = *StdHeader;
+
+ AmdS3ParamsInitializer (&S3LateParams->S3DataBlock);
+
+ AmdS3LateRestorePlatformConfigInit (&S3LateParams->PlatformConfig, &S3LateParams->StdHeader);
+
+ return AGESA_SUCCESS;
+}
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initialize AmdS3LateRestore stage platform profile and user option input.
+ *
+ * @param[in,out] PlatformConfig Platform profile/build option config structure
+ * @param[in,out] StdHeader AMD standard header config param
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdS3LateRestorePlatformConfigInit (
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CommonPlatformConfigInit (PlatformConfig, StdHeader);
+
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdS3Save.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdS3Save.c
new file mode 100644
index 0000000..7c5964c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdS3Save.c
@@ -0,0 +1,424 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Basic Level Public APIs
+ *
+ * Contains basic Level Initialization routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Interface
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "CommonInits.h"
+#include "AmdFch.h"
+#include "GnbInterface.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_COMMON_AMDS3SAVE_FILECODE
+
+extern BLDOPT_FCH_FUNCTION BldoptFchFunction;
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+CONST UINT32 ROMDATA S3LateHeapTable[] =
+{
+ EVENT_LOG_BUFFER_HANDLE,
+ SOCKET_DIE_MAP_HANDLE,
+ NODE_ID_MAP_HANDLE,
+ AP_MAIL_BOX_CACHE_HANDLE,
+ IDS_CONTROL_HANDLE,
+ AMD_S3_SCRIPT_SAVE_TABLE_HANDLE,
+ AMD_PCIE_COMPLEX_DATA_HANDLE
+};
+
+#define S3LATE_TABLE_SIZE (sizeof (S3LateHeapTable) / sizeof (UINT32)) //(sizeof (S3LateHeapTable) / sizeof (S3LATE_HEAP_ELEMENT))
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdS3SavePlatformConfigInit (
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Main entry point for the AMD_S3_SAVE function.
+ *
+ * This entry point is responsible for saving silicon component registers to the
+ * SMM save area in preparation of entering system suspend-to-RAM mode.
+ *
+ * @param[in,out] AmdS3SaveParams Required input parameters for the AMD_S3_SAVE
+ * entry point.
+ *
+ * @return Aggregated status across all internal AMD S3 save calls invoked.
+ *
+ */
+AGESA_STATUS
+AmdS3Save (
+ IN OUT AMD_S3SAVE_PARAMS *AmdS3SaveParams
+ )
+{
+ UINTN i;
+ UINT32 EarlyBufferSize;
+ UINT32 LateBufferSize;
+ UINT32 LateContextSize;
+ UINT32 HeapSize;
+ UINT8 *BufferPointer;
+ UINT8 HeapStatus;
+ ALLOCATE_HEAP_PARAMS HeapParams;
+ LOCATE_HEAP_PTR LocateHeap;
+ BUFFER_NODE *FreeSpaceNode;
+ ALLOCATE_HEAP_PARAMS AllocParams;
+ DEVICE_BLOCK_HEADER *MemoryRelatedDeviceList;
+ DEVICE_BLOCK_HEADER *NonMemoryRelatedDeviceList;
+ AGESA_STATUS ReturnStatus;
+ AGESA_STATUS AgesaStatus;
+ VOID *HeapPtrs[S3LATE_TABLE_SIZE];
+ UINT32 HeapSizes[S3LATE_TABLE_SIZE];
+ UINT32 HeapBuffersPresent;
+ HEAP_MANAGER *HeapPtr;
+ VOID *MemDataPointer;
+
+ AGESA_TESTPOINT (TpIfAmdS3SaveEntry, &AmdS3SaveParams->StdHeader);
+
+ ASSERT (AmdS3SaveParams != NULL);
+
+ HeapBuffersPresent = 0;
+ EarlyBufferSize = 0;
+ LateBufferSize = 0;
+ LateContextSize = 0;
+ HeapSize = 0;
+ NonMemoryRelatedDeviceList = NULL;
+ MemoryRelatedDeviceList = NULL;
+ ReturnStatus = AGESA_SUCCESS;
+ MemDataPointer = NULL;
+
+ IDS_SKIP_HOOK (IDS_BEFORE_S3_SAVE, AmdS3SaveParams, &(AmdS3SaveParams->StdHeader)) {
+ IDS_PERF_TIMESTAMP (TP_BEGINGNBINITATS3SAVE, &(AmdS3SaveParams->StdHeader));
+ AgesaStatus = GnbInitAtS3Save (AmdS3SaveParams);
+ IDS_PERF_TIMESTAMP (TP_ENDGNBINITATS3SAVE, &(AmdS3SaveParams->StdHeader));
+ if (AgesaStatus > ReturnStatus) {
+ ReturnStatus = AgesaStatus;
+ }
+
+ LocateHeap.BufferHandle = AMD_SKIP_MEM_S3_SAVE;
+ if (HeapLocateBuffer (&LocateHeap, &AmdS3SaveParams->StdHeader) == AGESA_SUCCESS) {
+ EarlyBufferSize = 0;
+ } else {
+ LocateHeap.BufferHandle = AMD_MEM_S3_SAVE_HANDLE;
+ if (HeapLocateBuffer (&LocateHeap, &AmdS3SaveParams->StdHeader) == AGESA_SUCCESS) {
+ // Memory data has been saved and stored in the heap.
+ // Just copy data from heap.
+ // First 4 bytes in the heap store the size of the saved memory data.
+ EarlyBufferSize = *(UINT32 *) LocateHeap.BufferPtr;
+ MemDataPointer = LocateHeap.BufferPtr + 4;
+ } else {
+ // Get memory device list
+ MemFS3GetDeviceList (&MemoryRelatedDeviceList, &AmdS3SaveParams->StdHeader);
+ if (MemoryRelatedDeviceList != NULL) {
+ // Determine size needed
+ EarlyBufferSize = GetWorstCaseContextSize (MemoryRelatedDeviceList, INIT_RESUME, &AmdS3SaveParams->StdHeader);
+ }
+ }
+ }
+
+ if (UserOptions.CfgS3LateRestore) {
+ for (i = 0; i < S3LATE_TABLE_SIZE; i++) {
+ LocateHeap.BufferHandle = S3LateHeapTable[i];
+ if (HeapLocateBuffer (&LocateHeap, &AmdS3SaveParams->StdHeader) == AGESA_SUCCESS) {
+ HeapBuffersPresent++;
+ HeapSize += LocateHeap.BufferSize;
+ HeapPtrs[i] = LocateHeap.BufferPtr;
+ HeapSizes[i] = LocateHeap.BufferSize;
+ } else {
+ HeapPtrs[i] = NULL;
+ HeapSizes[i] = 0;
+ }
+ }
+
+ // Determine heap data size requirements
+ if (HeapBuffersPresent != 0) {
+ HeapSize += ((sizeof (HEAP_MANAGER)) + (HeapBuffersPresent * ((sizeof (BUFFER_NODE)) + (NUM_OF_SENTINEL * SIZE_OF_SENTINEL) + 0xF))); // reserve 0xF per buffer node for 16 byte alignment
+ }
+
+ // Get non memory device list
+ GetNonMemoryRelatedDeviceList (&NonMemoryRelatedDeviceList, &AmdS3SaveParams->StdHeader);
+
+ if (NonMemoryRelatedDeviceList != NULL) {
+ // Determine size needed
+ LateContextSize = GetWorstCaseContextSize (NonMemoryRelatedDeviceList, S3_LATE_RESTORE, &AmdS3SaveParams->StdHeader);
+ }
+ LateBufferSize = HeapSize + LateContextSize;
+ if (LateBufferSize != 0) {
+ LateBufferSize += sizeof (S3_VOLATILE_STORAGE_HEADER);
+ }
+ }
+
+ if ((EarlyBufferSize != 0) || (LateBufferSize != 0)) {
+ //
+ // Allocate a buffer
+ //
+ AllocParams.RequestedBufferSize = EarlyBufferSize + LateBufferSize;
+ AllocParams.BufferHandle = AMD_S3_INFO_BUFFER_HANDLE;
+ AllocParams.Persist = 0;
+ AGESA_TESTPOINT (TpIfBeforeAllocateS3SaveBuffer, &AmdS3SaveParams->StdHeader);
+ if (HeapAllocateBuffer (&AllocParams, &AmdS3SaveParams->StdHeader) != AGESA_SUCCESS) {
+ if (AGESA_ERROR > ReturnStatus) {
+ ReturnStatus = AGESA_ERROR;
+ }
+ }
+ AGESA_TESTPOINT (TpIfAfterAllocateS3SaveBuffer, &AmdS3SaveParams->StdHeader);
+
+ if (EarlyBufferSize != 0) {
+ AmdS3SaveParams->S3DataBlock.NvStorage = AllocParams.BufferPtr;
+ if (MemDataPointer != NULL) {
+ LibAmdMemCopy (AmdS3SaveParams->S3DataBlock.NvStorage,
+ MemDataPointer,
+ EarlyBufferSize,
+ &AmdS3SaveParams->StdHeader);
+ } else {
+ SaveDeviceListContext (MemoryRelatedDeviceList,
+ AmdS3SaveParams->S3DataBlock.NvStorage,
+ INIT_RESUME,
+ &EarlyBufferSize,
+ &AmdS3SaveParams->StdHeader);
+ }
+ }
+ AmdS3SaveParams->S3DataBlock.NvStorageSize = EarlyBufferSize;
+
+ if (LateBufferSize != 0) {
+ BufferPointer = AllocParams.BufferPtr;
+ AmdS3SaveParams->S3DataBlock.VolatileStorage = &(BufferPointer[EarlyBufferSize]);
+
+ ((S3_VOLATILE_STORAGE_HEADER *) AmdS3SaveParams->S3DataBlock.VolatileStorage)->HeapOffset = 0;
+ ((S3_VOLATILE_STORAGE_HEADER *) AmdS3SaveParams->S3DataBlock.VolatileStorage)->HeapSize = HeapSize;
+ ((S3_VOLATILE_STORAGE_HEADER *) AmdS3SaveParams->S3DataBlock.VolatileStorage)->RegisterDataOffset = 0;
+ ((S3_VOLATILE_STORAGE_HEADER *) AmdS3SaveParams->S3DataBlock.VolatileStorage)->RegisterDataSize = LateContextSize;
+
+ if (HeapSize != 0) {
+ // Transfer heap contents
+ ((S3_VOLATILE_STORAGE_HEADER *) AmdS3SaveParams->S3DataBlock.VolatileStorage)->HeapOffset = sizeof (S3_VOLATILE_STORAGE_HEADER);
+ HeapPtr = (HEAP_MANAGER *) &BufferPointer[EarlyBufferSize + sizeof (S3_VOLATILE_STORAGE_HEADER)];
+ HeapPtr->UsedSize = sizeof (HEAP_MANAGER);
+ HeapPtr->Signature = HEAP_SIGNATURE_VALID;
+ HeapPtr->FirstActiveBufferOffset = AMD_HEAP_INVALID_HEAP_OFFSET;
+ HeapPtr->FirstFreeSpaceOffset = sizeof (HEAP_MANAGER);
+ FreeSpaceNode = (BUFFER_NODE *) ((UINT8 *) HeapPtr + sizeof (HEAP_MANAGER));
+ FreeSpaceNode->BufferSize = HeapSize - sizeof (HEAP_MANAGER) - sizeof (BUFFER_NODE);
+ FreeSpaceNode->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET;
+
+ HeapStatus = AmdS3SaveParams->StdHeader.HeapStatus;
+ AmdS3SaveParams->StdHeader.HeapStatus = HEAP_S3_RESUME;
+ AmdS3SaveParams->StdHeader.HeapBasePtr = (UINT64) (UINTN) HeapPtr;
+
+ for (i = 0; i < S3LATE_TABLE_SIZE; i++) {
+ if (HeapPtrs[i] != NULL) {
+ HeapParams.RequestedBufferSize = HeapSizes[i]; // S3LateHeapTable[i].BufferLength;
+ HeapParams.BufferHandle = S3LateHeapTable[i];
+ HeapParams.Persist = HEAP_S3_RESUME;
+ if (HeapAllocateBuffer (&HeapParams, &AmdS3SaveParams->StdHeader) == AGESA_SUCCESS) {
+ LibAmdMemCopy ((VOID *) HeapParams.BufferPtr, HeapPtrs[i], HeapSizes[i], &AmdS3SaveParams->StdHeader);
+ }
+ }
+ }
+
+ AmdS3SaveParams->StdHeader.HeapStatus = HeapStatus;
+ }
+
+
+ if (LateContextSize != 0) {
+
+ ((S3_VOLATILE_STORAGE_HEADER *) AmdS3SaveParams->S3DataBlock.VolatileStorage)->RegisterDataOffset = HeapSize + sizeof (S3_VOLATILE_STORAGE_HEADER);
+
+ SaveDeviceListContext (NonMemoryRelatedDeviceList,
+ &(BufferPointer[EarlyBufferSize + HeapSize + sizeof (S3_VOLATILE_STORAGE_HEADER)]),
+ S3_LATE_RESTORE,
+ &LateContextSize,
+ &AmdS3SaveParams->StdHeader);
+ }
+
+ AmdS3SaveParams->S3DataBlock.VolatileStorageSize = HeapSize + LateContextSize + sizeof (S3_VOLATILE_STORAGE_HEADER);
+ }
+ }
+ }
+
+ AgesaStatus = BldoptFchFunction.InitLate (AmdS3SaveParams);
+ if (AgesaStatus > ReturnStatus) {
+ ReturnStatus = AgesaStatus;
+ }
+ IDS_OPTION_HOOK (IDS_AFTER_S3_SAVE, AmdS3SaveParams, &AmdS3SaveParams->StdHeader);
+ AGESA_TESTPOINT (TpIfAmdS3SaveExit, &AmdS3SaveParams->StdHeader);
+ return ReturnStatus;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Constructor for the AMD_S3_SAVE function.
+ *
+ * This routine is responsible for setting default values for the
+ * input parameters needed by the AMD_S3_SAVE entry point.
+ *
+ * @param[in] StdHeader The standard header.
+ * @param[in,out] S3SaveParams Required input parameters for the AMD_S3_SAVE
+ * entry point.
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdS3SaveInitializer (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_S3SAVE_PARAMS *S3SaveParams
+ )
+{
+ ASSERT (StdHeader != NULL);
+ ASSERT (S3SaveParams != NULL);
+
+ S3SaveParams->StdHeader = *StdHeader;
+
+ AmdS3ParamsInitializer (&S3SaveParams->S3DataBlock);
+
+ AmdS3SavePlatformConfigInit (&S3SaveParams->PlatformConfig, &S3SaveParams->StdHeader);
+ BldoptFchFunction.InitLateConstructor (S3SaveParams);
+
+ return AGESA_SUCCESS;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Destructor for the AMD_S3_SAVE function.
+ *
+ * This routine is responsible for deallocation of heap space allocated during
+ * AMD_S3_SAVE entry point.
+ *
+ * @param[in] StdHeader The standard header.
+ * @param[in,out] S3SaveParams Required input parameters for the AMD_INIT_RESUME
+ * entry point.
+ *
+ * @retval AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+AmdS3SaveDestructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_S3SAVE_PARAMS *S3SaveParams
+ )
+{
+ AGESA_STATUS ReturnStatus;
+ AGESA_STATUS RetVal;
+ LOCATE_HEAP_PTR LocateHeap;
+
+ ASSERT (S3SaveParams != NULL);
+
+ ReturnStatus = AGESA_SUCCESS;
+
+ // Deallocate heap space allocated during memory S3 save
+ LocateHeap.BufferHandle = AMD_MEM_S3_SAVE_HANDLE;
+ if (HeapLocateBuffer (&LocateHeap, StdHeader) == AGESA_SUCCESS) {
+ RetVal = HeapDeallocateBuffer (AMD_MEM_S3_SAVE_HANDLE, StdHeader);
+ } else {
+ RetVal = MemS3Deallocate (&S3SaveParams->StdHeader);
+ }
+ if (RetVal > ReturnStatus) {
+ ReturnStatus = RetVal;
+ }
+
+ RetVal = HeapDeallocateBuffer (AMD_S3_NB_INFO_BUFFER_HANDLE, StdHeader);
+ if (RetVal > ReturnStatus) {
+ ReturnStatus = RetVal;
+ }
+
+ RetVal = HeapDeallocateBuffer (AMD_S3_INFO_BUFFER_HANDLE, StdHeader);
+ if (RetVal > ReturnStatus) {
+ ReturnStatus = RetVal;
+ }
+
+ return ReturnStatus;
+}
+
+/*------------------------------------------------------------------------------------*/
+/**
+ * Initialize AmdS3Save stage platform profile and user option input.
+ *
+ * @param[in,out] PlatformConfig Platform profile/build option config structure
+ * @param[in,out] StdHeader AMD standard header config param
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+AmdS3SavePlatformConfigInit (
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ CommonPlatformConfigInit (PlatformConfig, StdHeader);
+
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/CommonInits.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/CommonInits.c
new file mode 100644
index 0000000..8947137
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/CommonInits.c
@@ -0,0 +1,143 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Common initialization routines.
+ *
+ * Contains common initialization routines across AGESA entries of phases.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Common
+ * @e \$Revision: 85430 $ @e \$Date: 2013-01-07 20:52:33 -0600 (Mon, 07 Jan 2013) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "CommonInits.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_COMMON_COMMONINITS_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------------*/
+
+/**
+ * Common routine to initialize PLATFORM_CONFIGURATION.
+ *
+ * @param[in,out] PlatformConfig Platform profile/build option config structure
+ * @param[in,out] StdHeader AMD standard header config param
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+CommonPlatformConfigInit (
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINTN i;
+
+ PlatformConfig->PlatformProfile = UserOptions.CfgPerformanceProfile;
+ PlatformConfig->PlatformDeemphasisList = UserOptions.CfgPlatformDeemphasisList;
+ PlatformConfig->CoreLevelingMode = (UINT8) UserOptions.CfgCoreLevelingMode;
+ PlatformConfig->C1eMode = UserOptions.CfgPlatformC1eMode;
+ PlatformConfig->C1ePlatformData = UserOptions.CfgPlatformC1eOpData;
+ PlatformConfig->C1ePlatformData1 = UserOptions.CfgPlatformC1eOpData1;
+ PlatformConfig->C1ePlatformData2 = UserOptions.CfgPlatformC1eOpData2;
+ PlatformConfig->C1ePlatformData3 = UserOptions.CfgPlatformC1eOpData3;
+ PlatformConfig->CStateMode = UserOptions.CfgPlatformCStateMode;
+ PlatformConfig->CStatePlatformData = UserOptions.CfgPlatformCStateOpData;
+ PlatformConfig->CStateIoBaseAddress = UserOptions.CfgPlatformCStateIoBaseAddress;
+ PlatformConfig->CpbMode = UserOptions.CfgPlatformCpbMode;
+ PlatformConfig->UserOptionDmi = UserOptions.OptionDmi;
+ PlatformConfig->UserOptionPState = UserOptions.OptionAcpiPstates;
+ PlatformConfig->UserOptionCrat = UserOptions.OptionCrat;
+ PlatformConfig->UserOptionCdit = UserOptions.OptionCdit;
+ PlatformConfig->UserOptionSrat = UserOptions.OptionSrat;
+ PlatformConfig->UserOptionSlit = UserOptions.OptionSlit;
+ PlatformConfig->UserOptionWhea = UserOptions.OptionWhea;
+ PlatformConfig->LowPowerPstateForProcHot = UserOptions.CfgLowPowerPstateForProcHot;
+ PlatformConfig->PowerCeiling = UserOptions.CfgAmdPowerCeiling;
+ PlatformConfig->HtcTemperatureLimit = UserOptions.CfgHtcTemperatureLimit;
+ PlatformConfig->LhtcTemperatureLimit = UserOptions.CfgLhtcTemperatureLimit;
+ PlatformConfig->ForcePstateIndependent = UserOptions.CfgAcpiPstateIndependent;
+ PlatformConfig->PstatesPsdPolicy = UserOptions.CfgAcpiPstatesPsdPolicy;
+ PlatformConfig->PStatesInHpcMode = UserOptions.OptionPStatesInHpcMode;
+ PlatformConfig->NumberOfIoApics = UserOptions.CfgPlatNumIoApics;
+ for (i = 0; i < MaxVrmType; i++) {
+ PlatformConfig->VrmProperties[i] = UserOptions.CfgPlatVrmCfg[i];
+ }
+ PlatformConfig->ProcessorScopeInSb = UserOptions.CfgProcessorScopeInSb;
+ PlatformConfig->ProcessorScopeName0 = UserOptions.CfgProcessorScopeName0;
+ PlatformConfig->ProcessorScopeName1 = UserOptions.CfgProcessorScopeName1;
+ PlatformConfig->GnbHdAudio = UserOptions.CfgGnbHdAudio;
+ PlatformConfig->AbmSupport = UserOptions.CfgAbmSupport;
+ PlatformConfig->DynamicRefreshRate = UserOptions.CfgDynamicRefreshRate;
+ PlatformConfig->LcdBackLightControl = UserOptions.CfgLcdBackLightControl;
+ if ((StdHeader->HeapStatus == HEAP_LOCAL_CACHE) ||
+ (StdHeader->HeapStatus == HEAP_TEMP_MEM) ||
+ (StdHeader->HeapStatus == HEAP_SYSTEM_MEM)) {
+ IDS_OPTION_HOOK (IDS_PLATFORMCFG_OVERRIDE, PlatformConfig, StdHeader);
+ }
+ return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/CommonInits.h b/src/vendorcode/amd/agesa/f16kb/Proc/Common/CommonInits.h
new file mode 100644
index 0000000..d08cbf8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/CommonInits.h
@@ -0,0 +1,65 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Common initialization routines.
+ *
+ * Contains common initialization routines across AGESA entries of phases.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Common
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _COMMON_INITS_H_
+#define _COMMON_INITS_H_
+
+/**
+ * Common routine to initialize PLATFORM_CONFIGURATION.
+ *
+ * @param[in,out] PlatformConfig Platform profile/build option config structure
+ * @param[in,out] StdHeader AMD standard header config param
+ *
+ * @retval AGESA_SUCCESS Always Succeeds.
+ *
+ */
+AGESA_STATUS
+CommonPlatformConfigInit (
+ IN OUT PLATFORM_CONFIGURATION *PlatformConfig,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif // _COMMON_INITS_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/CommonReturns.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/CommonReturns.c
new file mode 100644
index 0000000..ec1dadf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/CommonReturns.c
@@ -0,0 +1,262 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Common Return routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Common
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "Filecode.h"
+#include "CommonReturns.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_COMMON_COMMONRETURNS_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+CommonFchInitStub (
+ IN VOID *DataPtr
+ );
+
+VOID
+FchTaskDummy (
+ IN VOID *DataPtr
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+* Return TRUE.
+*
+* @retval TRUE Default case, no special action
+*/
+BOOLEAN
+CommonReturnTrue ( VOID )
+{
+ return TRUE;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+* Return False.
+*
+* @retval FALSE Default case, no special action
+*/
+BOOLEAN
+CommonReturnFalse ( VOID )
+{
+ return FALSE;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return (UINT8)zero.
+ *
+ *
+ * @retval zero None, or only case zero.
+ */
+UINT8
+CommonReturnZero8 ( VOID )
+{
+ return 0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return (UINT32)zero.
+ *
+ *
+ * @retval zero None, or only case zero.
+ */
+UINT32
+CommonReturnZero32 ( VOID )
+{
+ return 0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return (UINT64)zero.
+ *
+ *
+ * @retval zero None, or only case zero.
+ */
+UINT64
+CommonReturnZero64 ( VOID )
+{
+ return 0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return (UINT8)one.
+ *
+ *
+ * @retval one None, or only case one.
+ */
+UINT8
+CommonReturnOne8 ( VOID )
+{
+ return 1;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return (UINT32)one.
+ *
+ *
+ * @retval one None, or only case one.
+ */
+UINT32
+CommonReturnOne32 ( VOID )
+{
+ return 1;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return (UINT64)one.
+ *
+ *
+ * @retval one None, or only case one.
+ */
+UINT64
+CommonReturnOne64 ( VOID )
+{
+ return 1;
+}
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return NULL
+ *
+ * @retval NULL pointer to nothing
+ */
+VOID *
+CommonReturnNULL ( VOID )
+{
+ return NULL;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+* Return AGESA_SUCCESS.
+*
+* @retval AGESA_SUCCESS Success.
+*/
+AGESA_STATUS
+CommonReturnAgesaSuccess ( VOID )
+{
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+* Return AGESA_ERROR.
+*
+* @retval AGESA_ERROR Error.
+*/
+AGESA_STATUS
+CommonReturnAgesaError ( VOID )
+{
+ return AGESA_ERROR;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Do Nothing.
+ *
+ */
+VOID
+CommonVoid ( VOID )
+{
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * ASSERT if this routine is called.
+ *
+ */
+VOID
+CommonAssert ( VOID )
+{
+ ASSERT (FALSE);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+* Return AGESA_SUCCESS.
+*
+* @retval AGESA_SUCCESS Success.
+*/
+AGESA_STATUS
+CommonFchInitStub (
+ IN VOID *DataPtr
+ )
+{
+ return AGESA_SUCCESS;
+}
+
+
+VOID
+FchTaskDummy (
+ IN VOID *DataPtr
+ )
+{
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/CreateStruct.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/CreateStruct.c
new file mode 100644
index 0000000..8468d3b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/CreateStruct.c
@@ -0,0 +1,313 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Input Structure Creation
+ *
+ * Contains AGESA input structure creation support.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Common
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "GeneralServices.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_COMMON_CREATESTRUCT_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern CONST FUNCTION_PARAMS_INFO FuncParamsInfo[];
+extern CONST UINTN InitializerCount;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Allocate and initialize Config headers and Service Interface structures.
+ *
+ * This function will be called for each AGESA public APIs.
+ * This function will do the following:
+ * -# Locate the AGESA API structure parameters initializer function information.
+ * -# Find the size of the structure that gets passed to each public APIs as
+ * the entry parameter. Allocate heap space using the size for PreMemHeap, callout for
+ * memory allocation for PostMemDram, and just set the config and service interface
+ * pointers for ByHost.
+ * -# If the allocation is not ByHost, copy the AmdConfigParams into the newly created AmdConfigParams.
+ * For ByHost, we're using the caller's existing config params.
+ * -# Call the initializer function, and pass a reference to the Config params and to
+ * the Service Interface struct. On return the constructor will have filled the
+ * remaining structure with default values.
+ * -# Fill the remaining info in the newly created structure on heap in AMD_CONFIG_PARAMS
+ * area (i.e. Fill *newStructPtr with the pointer to the newly created structure)
+ * -# Set the appropriate AGESA function number in the StdHeader member of the input
+ * parameter structure.
+ *
+ * @param[in,out] InterfaceParams Pointer to structure containing the function call
+ * whose parameter structure is to be created, the
+ * allocation method, and a pointer to the newly
+ * created structure.
+ *
+ * @retval AGESA_SUCCESS The interface struct is allocated and initialized.
+ * @retval AGESA_UNSUPPORTED The Service is not supported.
+ *
+ */
+AGESA_STATUS
+AmdCreateStruct (
+ IN OUT AMD_INTERFACE_PARAMS *InterfaceParams
+ )
+{
+ UINTN ServiceIndex;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ AMD_CONFIG_PARAMS *NewlyCreatedConfig;
+ VOID *NewlyCreatedServiceInterface;
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS TempStatus;
+ AGESA_STATUS IgnoredSts;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ AgesaStatus = AGESA_SUCCESS;
+
+ ASSERT (InterfaceParams != NULL);
+
+ switch (InterfaceParams->AgesaFunctionName) {
+ case AMD_INIT_RESET:
+ if (!IsBsp (&InterfaceParams->StdHeader, &IgnoredSts)) {
+ // APs must transfer their system core number from the mailbox to
+ // a local register while it is still valid.
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &InterfaceParams->StdHeader);
+ FamilySpecificServices->TransferApCoreNumber (FamilySpecificServices, &InterfaceParams->StdHeader);
+ }
+ InterfaceParams->StdHeader.HeapStatus = HEAP_DO_NOT_EXIST_YET;
+ break;
+ case AMD_INIT_EARLY:
+ case AMD_INIT_RECOVERY:
+ case AMD_INIT_RESUME:
+ case AMD_INIT_POST:
+ InterfaceParams->StdHeader.HeapStatus = HEAP_LOCAL_CACHE;
+ break;
+ case AMD_INIT_ENV:
+ InterfaceParams->StdHeader.HeapStatus = HEAP_TEMP_MEM;
+ break;
+ case AMD_INIT_LATE:
+ case AMD_INIT_MID:
+ case AMD_S3_SAVE:
+ case AMD_LATE_RUN_AP_TASK:
+ InterfaceParams->StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ break;
+ case AMD_S3LATE_RESTORE:
+ InterfaceParams->StdHeader.HeapStatus = HEAP_S3_RESUME;
+ break;
+ default:
+ ASSERT (FALSE);
+ InterfaceParams->StdHeader.HeapStatus = HEAP_LOCAL_CACHE;
+ break;
+ }
+
+ InterfaceParams->StdHeader.HeapBasePtr = HeapGetBaseAddress (&InterfaceParams->StdHeader);
+
+ if (InterfaceParams->AgesaFunctionName == AMD_INIT_RESET) {
+ AgesaStatus = HeapManagerInit (&InterfaceParams->StdHeader);
+ }
+
+ // Step 1
+ for (ServiceIndex = 0; ServiceIndex < InitializerCount; ServiceIndex++) {
+ if (FuncParamsInfo[ServiceIndex].AgesaFunctionName == InterfaceParams->AgesaFunctionName) {
+ break;
+ }
+ }
+ if (ServiceIndex >= InitializerCount) {
+ // A call was made to AGESA with an invalid function number. This wrapper error may be due to the build target
+ // not containing the desired entry point.
+ return AGESA_UNSUPPORTED;
+ }
+
+ // Step 2
+ LibAmdMemFill (&AllocHeapParams, 0, (UINTN) (sizeof (ALLOCATE_HEAP_PARAMS)), &InterfaceParams->StdHeader);
+
+ if (InterfaceParams->AllocationMethod < ByHost) {
+ // Allocate one buffer to contain the config params and the service struct.
+ // The service struct begins immediately after the config params.
+ AllocHeapParams.RequestedBufferSize = FuncParamsInfo[ServiceIndex].CreateStructSize + sizeof (AMD_CONFIG_PARAMS);
+ AllocHeapParams.BufferHandle = FuncParamsInfo[ServiceIndex].BufferHandle;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ TempStatus = HeapAllocateBuffer (&AllocHeapParams, &(InterfaceParams->StdHeader));
+ AgesaStatus = ((AgesaStatus > TempStatus) ? AgesaStatus : TempStatus);
+ NewlyCreatedConfig = (AMD_CONFIG_PARAMS *)AllocHeapParams.BufferPtr;
+ NewlyCreatedConfig++;
+ NewlyCreatedServiceInterface = NewlyCreatedConfig;
+ NewlyCreatedConfig = (AMD_CONFIG_PARAMS *)AllocHeapParams.BufferPtr;
+ } else {
+ // The caller (example, agesa basic interface implementation) already has a buffer to use.
+ NewlyCreatedConfig = (AMD_CONFIG_PARAMS *)InterfaceParams;
+ NewlyCreatedServiceInterface = InterfaceParams->NewStructPtr;
+ ASSERT (InterfaceParams->NewStructSize >= FuncParamsInfo[ServiceIndex].CreateStructSize);
+ }
+ ASSERT (NewlyCreatedConfig != NULL);
+ ASSERT (NewlyCreatedServiceInterface != NULL);
+
+ // Step 3
+ if (InterfaceParams->AllocationMethod != ByHost) {
+ *NewlyCreatedConfig = InterfaceParams->StdHeader;
+ }
+
+ // Step 4
+ TempStatus = FuncParamsInfo[ServiceIndex].AgesaFunction (NewlyCreatedConfig, NewlyCreatedServiceInterface);
+ AgesaStatus = ((AgesaStatus > TempStatus) ? AgesaStatus : TempStatus);
+
+ // Step 5
+ if (InterfaceParams->AllocationMethod != ByHost) {
+ InterfaceParams->NewStructPtr = (VOID *) NewlyCreatedServiceInterface;
+ InterfaceParams->NewStructSize = FuncParamsInfo[ServiceIndex].CreateStructSize;
+ }
+
+ // Step 6
+ ((AMD_CONFIG_PARAMS *) InterfaceParams->NewStructPtr)->Func = InterfaceParams->AgesaFunctionName;
+ return AgesaStatus;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Clears storage space from allocation for a parameter block of an
+ * AGESA software call entry.
+ *
+ * @param[in,out] InterfaceParams Pointer to structure containing the function call
+ * whose parameter structure is to be deallocated.
+ *
+ * @retval AGESA_STATUS
+ *
+ *---------------------------------------------------------------------------------------
+ **/
+AGESA_STATUS
+AmdReleaseStruct (
+ IN OUT AMD_INTERFACE_PARAMS *InterfaceParams
+ )
+{
+ UINT8 i;
+ UINT8 *BufferPtr;
+ VOID *ServicePtr;
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS TempStatus;
+ LOCATE_HEAP_PTR LocHeap;
+
+ AgesaStatus = AGESA_SUCCESS;
+
+ switch (InterfaceParams->AgesaFunctionName) {
+ case AMD_INIT_RESET:
+ case AMD_INIT_EARLY:
+ case AMD_INIT_RECOVERY:
+ case AMD_INIT_RESUME:
+ InterfaceParams->StdHeader.HeapStatus = HEAP_LOCAL_CACHE;
+ break;
+ case AMD_INIT_POST:
+ InterfaceParams->StdHeader.HeapStatus = HEAP_TEMP_MEM;
+ break;
+ case AMD_INIT_ENV:
+ case AMD_INIT_LATE:
+ case AMD_INIT_MID:
+ case AMD_S3_SAVE:
+ case AMD_LATE_RUN_AP_TASK:
+ InterfaceParams->StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ break;
+ case AMD_S3LATE_RESTORE:
+ InterfaceParams->StdHeader.HeapStatus = HEAP_S3_RESUME;
+ break;
+ default:
+ ASSERT (FALSE);
+ InterfaceParams->StdHeader.HeapStatus = HEAP_LOCAL_CACHE;
+ break;
+ }
+
+ InterfaceParams->StdHeader.HeapBasePtr = HeapGetBaseAddress (&InterfaceParams->StdHeader);
+
+// Step 1
+ for (i = 0; i < InitializerCount; i++) {
+ if (FuncParamsInfo[i].AgesaFunctionName == InterfaceParams->AgesaFunctionName) {
+ break;
+ }
+ }
+ if (i >= InitializerCount) {
+ return AGESA_BOUNDS_CHK;
+ }
+
+ // Step 2
+ if (InterfaceParams->AllocationMethod < ByHost) {
+ LocHeap.BufferHandle = FuncParamsInfo[i].BufferHandle;
+ if (HeapLocateBuffer (&LocHeap, &(InterfaceParams->StdHeader)) == AGESA_SUCCESS) {
+ BufferPtr = (UINT8 *) LocHeap.BufferPtr;
+ ServicePtr = &BufferPtr[sizeof (AMD_CONFIG_PARAMS)];
+ TempStatus = FuncParamsInfo[i].AgesaDestructor (&(InterfaceParams->StdHeader), ServicePtr);
+ AgesaStatus = ((AgesaStatus > TempStatus) ? AgesaStatus : TempStatus);
+ }
+ }
+
+ // Step 3
+ if (InterfaceParams->AllocationMethod < ByHost) {
+ TempStatus = HeapDeallocateBuffer (FuncParamsInfo[i].BufferHandle, &(InterfaceParams->StdHeader));
+ AgesaStatus = ((AgesaStatus > TempStatus) ? AgesaStatus : TempStatus);
+ } else {
+ // Unless we define service specific destructors, nothing to do for ByHost.
+ return AGESA_SUCCESS;
+ }
+ return AgesaStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/CreateStruct.h b/src/vendorcode/amd/agesa/f16kb/Proc/Common/CreateStruct.h
new file mode 100644
index 0000000..6b67f5f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/CreateStruct.h
@@ -0,0 +1,195 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD AGESA Input Structure Creation
+ *
+ * Contains AGESA input creation structures.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Common
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+#ifndef _CREATE_STRUCT_H_
+#define _CREATE_STRUCT_H_
+
+/**
+ * A constructor method.
+ *
+ * Sets inputs to valid, basic level, defaults for the specific service instance.
+ * Constructors should avoid using the header, since these routines should not
+ * do operations which may fail or require status back to the user. The constructor
+ * should always SUCCEED.
+ *
+ * @param[in] StdHeader Opaque handle to standard config header
+ * @param[in] ServiceInterface Service Interface structure to initialize.
+ *
+ * @retval AGESA_SUCCESS Constructors are not allowed to fail
+*/
+typedef AGESA_STATUS
+F_AGESA_FUNCTION (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN VOID *ServiceInterface
+ );
+
+/// Reference to a Method.
+typedef F_AGESA_FUNCTION *PF_AGESA_FUNCTION;
+
+/**
+ * A Destructor method.
+ *
+ * Sets inputs to valid, basic level, defaults for the specific service instance.
+ * The constructor should always SUCCEED.
+ *
+ * @param[in] StdHeader Opaque handle to standard config header.
+ * @param[in] ServiceInterface Service Interface structure to initialize.
+ *
+ * @retval AGESA_SUCCESS Constructors are not allowed to fail
+*/
+typedef AGESA_STATUS
+F_AGESA_DESTRUCTOR (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN VOID *ServiceInterface
+ );
+
+/// Reference to a Method.
+typedef F_AGESA_DESTRUCTOR *PF_AGESA_DESTRUCTOR;
+
+/**
+ * Provide the information needed to invoke each service constructor.
+ */
+typedef struct {
+ IN AGESA_STRUCT_NAME AgesaFunctionName; ///< Identifies the service
+ IN UINT16 CreateStructSize; ///< The service's input struct size.
+ /// Do NOT include a config params header!
+ OUT PF_AGESA_FUNCTION AgesaFunction; ///< The constructor function
+ OUT PF_AGESA_DESTRUCTOR AgesaDestructor; ///< The destructor function.
+ IN AGESA_BUFFER_HANDLE BufferHandle; ///< The buffer handle id for the service.
+} FUNCTION_PARAMS_INFO;
+
+/**
+ * All available services have their constructor info here.
+ */
+AGESA_STATUS
+AmdInitResetConstructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_RESET_PARAMS *AmdResetParams
+ );
+
+AGESA_STATUS
+AmdInitRecoveryInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_RECOVERY_PARAMS *AmdRecoveryParamsPtr
+ );
+
+AGESA_STATUS
+AmdInitEarlyInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_EARLY_PARAMS *EarlyParams
+ );
+
+AGESA_STATUS
+AmdInitPostInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_POST_PARAMS *PostParamsPtr
+ );
+
+AGESA_STATUS
+AmdInitPostDestructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_POST_PARAMS *PostParamsPtr
+ );
+
+AGESA_STATUS
+AmdInitEnvInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_ENV_PARAMS *EnvParamsPtr
+ );
+
+AGESA_STATUS
+AmdInitMidInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_MID_PARAMS *MidParamsPtr
+ );
+
+AGESA_STATUS
+AmdInitLateInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_LATE_PARAMS *LateParamsPtr
+ );
+
+AGESA_STATUS
+AmdInitLateDestructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_LATE_PARAMS *LateParamsPtr
+ );
+
+AGESA_STATUS
+AmdInitResumeInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_RESUME_PARAMS *ResumeParams
+ );
+
+AGESA_STATUS
+AmdInitResumeDestructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_RESUME_PARAMS *ResumeParams
+ );
+
+AGESA_STATUS
+AmdS3SaveInitializer (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_S3SAVE_PARAMS *S3SaveParams
+ );
+
+AGESA_STATUS
+AmdS3SaveDestructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_S3SAVE_PARAMS *S3SaveParams
+ );
+
+AGESA_STATUS
+AmdS3LateRestoreInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AMD_S3LATE_PARAMS *S3LateParams
+ );
+
+AGESA_STATUS
+AmdLateRunApTaskInitializer (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT AP_EXE_PARAMS *AmdApExeParams
+ );
+#endif // _CREATE_STRUCT_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/S3RestoreState.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/S3RestoreState.c
new file mode 100644
index 0000000..9da575c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/S3RestoreState.c
@@ -0,0 +1,441 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * S3 save/restore script
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "Porting.h"
+#include "AMD.h"
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "S3SaveState.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_COMMON_S3RESTORESTATE_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern S3_SCRIPT_CONFIGURATION OptionS3ScriptConfiguration;
+extern S3_DISPATCH_FUNCTION_ENTRY S3DispatchFunctionTable[];
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+AGESA_STATUS
+STATIC
+S3RestoreStateFromTable (
+ IN S3_SAVE_TABLE_HEADER *S3SaveTablePtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ */
+AGESA_STATUS
+S3ScriptRestore (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return OptionS3ScriptConfiguration.Restore (StdHeader);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ */
+AGESA_STATUS
+S3ScriptRestoreStateStub (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ */
+AGESA_STATUS
+S3ScriptRestoreState (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ S3_SAVE_TABLE_HEADER *S3SaveTablePtr;
+ Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr);
+ if (Status != AGESA_SUCCESS) {
+ IDS_ERROR_TRAP;
+ return AGESA_FATAL;
+ }
+ S3SaveTablePtr->Locked = TRUE;
+ Status = S3RestoreStateFromTable (S3SaveTablePtr, StdHeader);
+ return Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] S3SaveTablePtr Pointer to S3 Save Table
+ * @param[in] StdHeader Pointer to standard header
+ */
+AGESA_STATUS
+STATIC
+S3RestoreStateFromTable (
+ IN S3_SAVE_TABLE_HEADER *S3SaveTablePtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ VOID *S3SaveTableRecordPtr;
+ PCI_ADDR PciAddress;
+ UINTN Index;
+ S3SaveTableRecordPtr = (UINT8 *) S3SaveTablePtr + sizeof (S3_SAVE_TABLE_HEADER);
+ IDS_HDT_CONSOLE (S3_TRACE, "Start S3 restore\n", ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address);
+ while ((UINT8 *) S3SaveTableRecordPtr < ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset)) {
+ switch (*(UINT16 *) S3SaveTableRecordPtr) {
+ case SAVE_STATE_IO_WRITE_OPCODE:
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address);
+ S3SaveDebugPrintHexArray (StdHeader, (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_WRITE_OP_HEADER), 1, ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+ IDS_HDT_CONSOLE (S3_TRACE, "\n");
+ );
+ LibAmdIoWrite (
+ ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+ (UINT16) ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_WRITE_OP_HEADER),
+ StdHeader
+ );
+ S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+ sizeof (S3_WRITE_OP_HEADER) +
+ LibAmdAccessWidth (((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+ break;
+ case SAVE_STATE_IO_READ_WRITE_OPCODE:
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_READ_WRITE_OP_HEADER*) S3SaveTableRecordPtr)->Address);
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+ 1,
+ ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+ );
+ IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER) + LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+ 1,
+ ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+ );
+ IDS_HDT_CONSOLE (S3_TRACE, "\n");
+ );
+ LibAmdIoRMW (
+ ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+ (UINT16) ((S3_READ_WRITE_OP_HEADER*) S3SaveTableRecordPtr)->Address,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER) + LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+ StdHeader
+ );
+ S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+ sizeof (S3_READ_WRITE_OP_HEADER) +
+ 2 * LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+ break;
+ case SAVE_STATE_MEM_WRITE_OPCODE:
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address);
+ S3SaveDebugPrintHexArray (StdHeader, (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_WRITE_OP_HEADER), 1, ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+ IDS_HDT_CONSOLE (S3_TRACE, "\n");
+ );
+ LibAmdMemWrite (
+ ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+ ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_WRITE_OP_HEADER),
+ StdHeader
+ );
+ S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+ sizeof (S3_WRITE_OP_HEADER) +
+ LibAmdAccessWidth (((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+ break;
+ case SAVE_STATE_MEM_READ_WRITE_OPCODE:
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_READ_WRITE_OP_HEADER*) S3SaveTableRecordPtr)->Address);
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+ 1,
+ ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+ );
+ IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER) + LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+ 1,
+ ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+ );
+ IDS_HDT_CONSOLE (S3_TRACE, "\n");
+ );
+ LibAmdMemRMW (
+ ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+ ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER) + LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER*) S3SaveTableRecordPtr)->Width),
+ StdHeader
+ );
+ S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+ sizeof (S3_READ_WRITE_OP_HEADER) +
+ 2 * LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+ break;
+ case SAVE_STATE_PCI_CONFIG_WRITE_OPCODE:
+ PciAddress.AddressValue = (UINT32) ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address;
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address);
+ S3SaveDebugPrintHexArray (StdHeader, (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_WRITE_OP_HEADER), 1, ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+ IDS_HDT_CONSOLE (S3_TRACE, "\n");
+ );
+ LibAmdPciWrite (
+ ((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+ PciAddress,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_WRITE_OP_HEADER),
+ StdHeader
+ );
+ S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+ sizeof (S3_WRITE_OP_HEADER) +
+ LibAmdAccessWidth (((S3_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+ break;
+ case SAVE_STATE_PCI_CONFIG_READ_WRITE_OPCODE:
+ PciAddress.AddressValue = (UINT32) ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Address;
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_READ_WRITE_OP_HEADER*) S3SaveTableRecordPtr)->Address);
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+ 1,
+ ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+ );
+ IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER) + LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+ 1,
+ ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+ );
+ IDS_HDT_CONSOLE (S3_TRACE, "\n");
+ );
+ LibAmdPciRMW (
+ ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+ PciAddress,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_READ_WRITE_OP_HEADER) + LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+ StdHeader
+ );
+ S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+ sizeof (S3_READ_WRITE_OP_HEADER) +
+ 2 * LibAmdAccessWidth (((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+ break;
+ case SAVE_STATE_STALL_OPCODE:
+ break;
+ case SAVE_STATE_INFORMATION_OPCODE:
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Restore: Info: [%s]\n", (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_INFO_OP_HEADER));
+ S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+ sizeof (S3_INFO_OP_HEADER) +
+ ((S3_INFO_OP_HEADER*) S3SaveTableRecordPtr)->Length;
+ break;
+ case SAVE_STATE_DISPATCH_OPCODE:
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Restore: %s Function Id: 0x%02x, Context: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), ((S3_DISPATCH_OP_HEADER*) S3SaveTableRecordPtr)->FunctionId);
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (VOID*)((UINT8*) S3SaveTableRecordPtr + sizeof (S3_DISPATCH_OP_HEADER)),
+ ((S3_DISPATCH_OP_HEADER*) S3SaveTableRecordPtr)->Length,
+ AccessWidth8);
+ IDS_HDT_CONSOLE (S3_TRACE, "\n");
+ );
+ Index = 0;
+ while (S3DispatchFunctionTable[Index].FunctionId != 0) {
+ if (S3DispatchFunctionTable[Index].FunctionId == ((S3_DISPATCH_OP_HEADER*) S3SaveTableRecordPtr)->FunctionId) {
+ (S3DispatchFunctionTable[Index].Function) (
+ StdHeader,
+ ((S3_DISPATCH_OP_HEADER*) S3SaveTableRecordPtr)->Length,
+ (VOID*)((UINT8*) S3SaveTableRecordPtr + sizeof (S3_DISPATCH_OP_HEADER))
+ );
+ break;
+ }
+ Index++;
+ }
+ ASSERT (S3DispatchFunctionTable[Index].FunctionId != 0);
+ S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+ sizeof (S3_DISPATCH_OP_HEADER) +
+ ((S3_DISPATCH_OP_HEADER*) S3SaveTableRecordPtr)->Length;
+ break;
+
+ case SAVE_STATE_IO_POLL_OPCODE:
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Restore: %s Address: 0x%04x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT16) ((S3_POLL_OP_HEADER*) S3SaveTableRecordPtr)->Address);
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER),
+ 1,
+ ((S3_READ_WRITE_OP_HEADER *) S3SaveTableRecordPtr)->Width
+ );
+ IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER) + LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+ 1,
+ ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width
+ );
+ )
+ LibAmdIoPoll (
+ ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+ (UINT16) ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Address,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER),
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER) + LibAmdAccessWidth (((S3_POLL_OP_HEADER*) S3SaveTableRecordPtr)->Width),
+ ((S3_POLL_OP_HEADER*) S3SaveTableRecordPtr)->Delay,
+ StdHeader
+ );
+ S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+ sizeof (S3_POLL_OP_HEADER) +
+ 2 * LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+ break;
+ case SAVE_STATE_MEM_POLL_OPCODE:
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT32) ((S3_POLL_OP_HEADER*) S3SaveTableRecordPtr)->Address);
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER),
+ 1,
+ ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width
+ );
+ IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER) + LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+ 1,
+ ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width
+ );
+ )
+ LibAmdMemPoll (
+ ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+ ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Address,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER),
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER) + LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+ ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Delay,
+ StdHeader
+ );
+ S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+ sizeof (S3_POLL_OP_HEADER) +
+ 2 * LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+ break;
+ case SAVE_STATE_PCI_CONFIG_POLL_OPCODE:
+ PciAddress.AddressValue = (UINT32) ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Address;
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Restore: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, *(UINT16 *) S3SaveTableRecordPtr), (UINT32) ((S3_POLL_OP_HEADER*) S3SaveTableRecordPtr)->Address);
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER),
+ 1,
+ ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width
+ );
+ IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+ S3SaveDebugPrintHexArray (
+ StdHeader,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER) + LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+ 1,
+ ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width
+ );
+ )
+ LibAmdPciPoll (
+ ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width,
+ PciAddress,
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER),
+ (UINT8 *) S3SaveTableRecordPtr + sizeof (S3_POLL_OP_HEADER) + LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width),
+ ((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Delay,
+ StdHeader
+ );
+ S3SaveTableRecordPtr = (UINT8 *) S3SaveTableRecordPtr +
+ sizeof (S3_POLL_OP_HEADER) +
+ 2 * LibAmdAccessWidth (((S3_POLL_OP_HEADER *) S3SaveTableRecordPtr)->Width);
+ break;
+ default:
+ IDS_HDT_CONSOLE (S3_TRACE, " ERROR!!! Invalid S3 restore opcode\n");
+ ASSERT (FALSE);
+ return AGESA_ERROR;
+ }
+ }
+ IDS_HDT_CONSOLE (S3_TRACE, " End S3 Restore \n");
+ return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/S3SaveState.c b/src/vendorcode/amd/agesa/f16kb/Proc/Common/S3SaveState.c
new file mode 100644
index 0000000..c81c877
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/S3SaveState.c
@@ -0,0 +1,651 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * S3 save/restore script
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "Porting.h"
+#include "AMD.h"
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "S3SaveState.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_COMMON_S3SAVESTATE_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+extern S3_SCRIPT_CONFIGURATION OptionS3ScriptConfiguration;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+S3SaveStateExtendTableLenth (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT S3_SAVE_TABLE_HEADER **S3SaveTable
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ */
+AGESA_STATUS
+S3ScriptInit (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return OptionS3ScriptConfiguration.Init (StdHeader);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ */
+AGESA_STATUS
+S3ScriptInitStateStub (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ */
+AGESA_STATUS
+S3ScriptInitState (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ AllocHeapParams.RequestedBufferSize = S3_TABLE_LENGTH;
+ AllocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader);
+ if (Status == AGESA_SUCCESS) {
+ ((S3_SAVE_TABLE_HEADER *) AllocHeapParams.BufferPtr)->TableLength = S3_TABLE_LENGTH;
+ ((S3_SAVE_TABLE_HEADER *) AllocHeapParams.BufferPtr)->SaveOffset = sizeof (S3_SAVE_TABLE_HEADER);
+ ((S3_SAVE_TABLE_HEADER *) AllocHeapParams.BufferPtr)->Locked = FALSE;
+ }
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ * @param[in,out] S3SaveTable S3 save table header
+ */
+AGESA_STATUS
+S3SaveStateExtendTableLenth (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN OUT S3_SAVE_TABLE_HEADER **S3SaveTable
+ )
+{
+ AGESA_STATUS Status;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ VOID *TempBuffer;
+ UINT16 NewTableLength;
+ UINT16 CurrentTableLength;
+ //Allocate temporary buffer
+ NewTableLength = (*S3SaveTable)->TableLength + S3_TABLE_LENGTH_INCREMENT;
+ AllocHeapParams.RequestedBufferSize = NewTableLength;
+ AllocHeapParams.BufferHandle = AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE;
+ AllocHeapParams.Persist = StdHeader->HeapStatus;
+ Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ //Save current table length
+ CurrentTableLength = (*S3SaveTable)->TableLength;
+ //Update table length
+ (*S3SaveTable)->TableLength = NewTableLength;
+ //Copy S3 save toable to temporary location
+ LibAmdMemCopy (AllocHeapParams.BufferPtr, *S3SaveTable, CurrentTableLength, StdHeader);
+ //Save pointer to temp buffer
+ TempBuffer = AllocHeapParams.BufferPtr;
+ // Free original S3 save buffer
+ HeapDeallocateBuffer (AMD_S3_SCRIPT_SAVE_TABLE_HANDLE, StdHeader);
+
+ AllocHeapParams.RequestedBufferSize = NewTableLength;
+ AllocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE;
+ AllocHeapParams.Persist = StdHeader->HeapStatus;
+ Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ LibAmdMemCopy (AllocHeapParams.BufferPtr, TempBuffer, AllocHeapParams.RequestedBufferSize, StdHeader);
+ *S3SaveTable = (S3_SAVE_TABLE_HEADER*) AllocHeapParams.BufferPtr;
+ HeapDeallocateBuffer (AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE, StdHeader);
+ return Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize S3 Script framework
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ * @param[out] S3SaveTable S3 save table header
+ */
+AGESA_STATUS
+S3ScriptGetS3SaveTable (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT S3_SAVE_TABLE_HEADER **S3SaveTable
+ )
+{
+ AGESA_STATUS Status;
+ LOCATE_HEAP_PTR LocHeapParams;
+ LocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE;
+ Status = HeapLocateBuffer (&LocHeapParams, StdHeader);
+ if (Status != AGESA_SUCCESS) {
+ *S3SaveTable = NULL;
+ return Status;
+ }
+ *S3SaveTable = (S3_SAVE_TABLE_HEADER *) LocHeapParams.BufferPtr;
+ return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 write opcode
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ * @param[in] OpCode Operation opcode
+ * @param[in] Width Width
+ * @param[in] Address Register address
+ * @param[in] Count Number of register writes
+ * @param[in] Buffer Pointer to write buffer
+ */
+AGESA_STATUS
+S3SaveStateSaveWriteOp (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 OpCode,
+ IN ACCESS_WIDTH Width,
+ IN UINT64 Address,
+ IN UINT32 Count,
+ IN VOID *Buffer
+ )
+{
+ S3_SAVE_TABLE_HEADER *S3SaveTablePtr;
+ S3_WRITE_OP_HEADER *SaveOffsetPtr;
+ UINT32 OpCodeLength;
+ UINT32 WidthLength;
+ AGESA_STATUS Status;
+
+ Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ if (S3SaveTablePtr->Locked) {
+ return AGESA_UNSUPPORTED;
+ }
+ WidthLength = LibAmdAccessWidth (Width);
+ OpCodeLength = sizeof (S3_WRITE_OP_HEADER) + WidthLength * Count;
+ if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) {
+ Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ }
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Save: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, OpCode), Address);
+ S3SaveDebugPrintHexArray (StdHeader, Buffer, Count, Width);
+ IDS_HDT_CONSOLE (S3_TRACE, "\n");
+ );
+ SaveOffsetPtr = (S3_WRITE_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset);
+ SaveOffsetPtr->OpCode = OpCode;
+ SaveOffsetPtr->Width = Width;
+ SaveOffsetPtr->Count = Count;
+ SaveOffsetPtr->Address = Address;
+ LibAmdMemCopy (
+ (UINT8 *) SaveOffsetPtr + sizeof (S3_WRITE_OP_HEADER),
+ Buffer,
+ WidthLength * Count,
+ StdHeader
+ );
+ S3SaveTablePtr->SaveOffset += OpCodeLength;
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 write opcode
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ * @param[in] OpCode Operation opcode
+ * @param[in] Width Width
+ * @param[in] Address Register address
+ * @param[in] Data Pointer to data
+ * @param[in] DataMask Pointer data mask
+ */
+AGESA_STATUS
+S3SaveStateSaveReadWriteOp (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 OpCode,
+ IN ACCESS_WIDTH Width,
+ IN UINT64 Address,
+ IN VOID *Data,
+ IN VOID *DataMask
+ )
+{
+
+ S3_SAVE_TABLE_HEADER *S3SaveTablePtr;
+ S3_READ_WRITE_OP_HEADER *SaveOffsetPtr;
+ UINT32 OpCodeLength;
+ UINT32 WidthLength;
+ AGESA_STATUS Status;
+
+ Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ if (S3SaveTablePtr->Locked) {
+ return AGESA_UNSUPPORTED;
+ }
+ WidthLength = LibAmdAccessWidth (Width);
+ OpCodeLength = sizeof (S3_READ_WRITE_OP_HEADER) + WidthLength * 2;
+ if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) {
+ Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ }
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Save: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, OpCode), Address);
+ S3SaveDebugPrintHexArray (StdHeader, Data, 1, Width);
+ IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+ S3SaveDebugPrintHexArray (StdHeader, DataMask, 1, Width);
+ IDS_HDT_CONSOLE (S3_TRACE, "\n");
+ );
+ SaveOffsetPtr = (S3_READ_WRITE_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset);
+ SaveOffsetPtr->OpCode = OpCode;
+ SaveOffsetPtr->Width = Width;
+ SaveOffsetPtr->Address = Address;
+
+ LibAmdMemCopy (
+ (UINT8 *) SaveOffsetPtr + sizeof (S3_READ_WRITE_OP_HEADER),
+ Data,
+ WidthLength,
+ StdHeader
+ );
+ LibAmdMemCopy (
+ (UINT8 *) SaveOffsetPtr + sizeof (S3_READ_WRITE_OP_HEADER) + WidthLength,
+ DataMask,
+ WidthLength,
+ StdHeader
+ );
+ S3SaveTablePtr->SaveOffset += OpCodeLength;
+ return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 poll opcode
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ * @param[in] OpCode Operation opcode
+ * @param[in] Width Width
+ * @param[in] Address Register address
+ * @param[in] Data Pointer to data
+ * @param[in] DataMask Pointer data mask
+ * @param[in] Delay Time delay for poll
+ */
+AGESA_STATUS
+S3SaveStateSavePollOp (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 OpCode,
+ IN ACCESS_WIDTH Width,
+ IN UINT64 Address,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN UINT64 Delay
+ )
+{
+
+ S3_SAVE_TABLE_HEADER *S3SaveTablePtr;
+ S3_POLL_OP_HEADER *SaveOffsetPtr;
+ UINT32 OpCodeLength;
+ UINT32 WidthLength;
+ AGESA_STATUS Status;
+
+ Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ if (S3SaveTablePtr->Locked) {
+ return AGESA_UNSUPPORTED;
+ }
+ WidthLength = LibAmdAccessWidth (Width);
+ OpCodeLength = sizeof (S3_POLL_OP_HEADER) + WidthLength * 2;
+ if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) {
+ Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ }
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Save: %s Address: 0x%08x Data: ", S3SaveDebugOpcodeString (StdHeader, OpCode), Address);
+ S3SaveDebugPrintHexArray (StdHeader, Data, 1, Width);
+ IDS_HDT_CONSOLE (S3_TRACE, " Mask: ");
+ S3SaveDebugPrintHexArray (StdHeader, DataMask, 1, Width);
+ IDS_HDT_CONSOLE (S3_TRACE, "\n");
+ );
+ SaveOffsetPtr = (S3_POLL_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset);
+ SaveOffsetPtr->OpCode = OpCode;
+ SaveOffsetPtr->Width = Width;
+ SaveOffsetPtr->Delay = Delay;
+ SaveOffsetPtr->Address = Address;
+
+ LibAmdMemCopy (
+ (UINT8 *) SaveOffsetPtr + sizeof (S3_POLL_OP_HEADER),
+ Data,
+ WidthLength,
+ StdHeader
+ );
+ LibAmdMemCopy (
+ (UINT8 *) SaveOffsetPtr + sizeof (S3_POLL_OP_HEADER) + WidthLength,
+ DataMask,
+ WidthLength,
+ StdHeader
+ );
+ S3SaveTablePtr->SaveOffset += OpCodeLength;
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 info opcode
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ * @param[in] OpCode Operation opcode
+ * @param[in] InformationLength Info length
+ * @param[in] Information Pointer to information
+ */
+AGESA_STATUS
+S3SaveStateSaveInfoOp (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 OpCode,
+ IN UINT32 InformationLength,
+ IN VOID *Information
+ )
+{
+
+ S3_SAVE_TABLE_HEADER *S3SaveTablePtr;
+ S3_INFO_OP_HEADER *SaveOffsetPtr;
+ UINT32 OpCodeLength;
+
+ AGESA_STATUS Status;
+
+ Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ if (S3SaveTablePtr->Locked) {
+ return AGESA_UNSUPPORTED;
+ }
+ OpCodeLength = sizeof (S3_INFO_OP_HEADER) + InformationLength;
+ if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) {
+ Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ }
+ SaveOffsetPtr = (S3_INFO_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset);
+ SaveOffsetPtr->OpCode = OpCode;
+ SaveOffsetPtr->Length = InformationLength;
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Save: Info: %s \n", Information);
+ );
+ LibAmdMemCopy (
+ (UINT8 *) SaveOffsetPtr + sizeof (S3_INFO_OP_HEADER),
+ Information,
+ InformationLength,
+ StdHeader
+ );
+ S3SaveTablePtr->SaveOffset += OpCodeLength;
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 dispatch opcode
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ * @param[in] OpCode Operation opcode
+ * @param[in] FunctionId Function ID
+ * @param[in] ContextLength Context length
+ * @param[in] Context Pointer to Context
+ */
+AGESA_STATUS
+S3SaveStateSaveDispatchOp (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 OpCode,
+ IN UINT16 FunctionId,
+ IN UINT16 ContextLength,
+ IN VOID *Context
+ )
+{
+
+ S3_SAVE_TABLE_HEADER *S3SaveTablePtr;
+ S3_DISPATCH_OP_HEADER *SaveOffsetPtr;
+ UINT32 OpCodeLength;
+ AGESA_STATUS Status;
+
+ Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ if (S3SaveTablePtr->Locked) {
+ return AGESA_UNSUPPORTED;
+ }
+ OpCodeLength = sizeof (S3_DISPATCH_OP_HEADER) + ContextLength;
+ if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) {
+ Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ }
+ S3_SCRIPT_DEBUG_CODE (
+ IDS_HDT_CONSOLE (S3_TRACE, " S3 Save: %s Function Id: 0x%02x, Context: ", S3SaveDebugOpcodeString (StdHeader, OpCode), FunctionId);
+ S3SaveDebugPrintHexArray (StdHeader, Context, ContextLength, AccessWidth8);
+ IDS_HDT_CONSOLE (S3_TRACE, "\n");
+ );
+ SaveOffsetPtr = (S3_DISPATCH_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset);
+ SaveOffsetPtr->OpCode = OpCode;
+ SaveOffsetPtr->Length = ContextLength;
+ SaveOffsetPtr->FunctionId = FunctionId;
+ LibAmdMemCopy (
+ (UINT8 *) SaveOffsetPtr + sizeof (S3_DISPATCH_OP_HEADER),
+ Context,
+ ContextLength,
+ StdHeader
+ );
+
+ S3SaveTablePtr->SaveOffset += OpCodeLength;
+ return AGESA_SUCCESS;
+}
+
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 debug support
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ * @param[in] Op Opcode
+ */
+CHAR8*
+S3SaveDebugOpcodeString (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 Op
+ )
+{
+ switch (Op) {
+ case SAVE_STATE_IO_WRITE_OPCODE:
+ return (CHAR8 *)"IO WR";
+ case SAVE_STATE_IO_READ_WRITE_OPCODE:
+ return (CHAR8 *)"IO RD/WR";
+ case SAVE_STATE_IO_POLL_OPCODE:
+ return (CHAR8 *)"IO POLL";
+ case SAVE_STATE_MEM_WRITE_OPCODE:
+ return (CHAR8 *)"MEM WR";
+ case SAVE_STATE_MEM_READ_WRITE_OPCODE:
+ return (CHAR8 *)"MEM RD/WR";
+ case SAVE_STATE_MEM_POLL_OPCODE:
+ return (CHAR8 *)"MEM POLL";
+ case SAVE_STATE_PCI_CONFIG_WRITE_OPCODE:
+ return (CHAR8 *)"PCI WR";
+ case SAVE_STATE_PCI_CONFIG_READ_WRITE_OPCODE:
+ return (CHAR8 *)"PCI RD/WR";
+ case SAVE_STATE_PCI_CONFIG_POLL_OPCODE:
+ return (CHAR8 *)"PCI POLL";
+ case SAVE_STATE_STALL_OPCODE:
+ return (CHAR8 *)"STALL";
+ case SAVE_STATE_DISPATCH_OPCODE:
+ return (CHAR8 *)"DISPATCH";
+ default:
+ IDS_ERROR_TRAP;
+ }
+ return (CHAR8 *)"!!! Unrecognize opcode !!!";
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save S3 debug support
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to standard header
+ * @param[in] Array Array
+ * @param[in] Count Count of element in array
+ * @param[in] Width Array Element width
+ */
+VOID
+S3SaveDebugPrintHexArray (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN VOID *Array,
+ IN UINT32 Count,
+ IN ACCESS_WIDTH Width
+ )
+{
+ UINTN Index;
+
+ for (Index = 0; Index < Count; Index++) {
+ switch (Width) {
+ case AccessWidth8:
+ case AccessS3SaveWidth8:
+ IDS_HDT_CONSOLE (S3_TRACE, "0x%02x", *((UINT8*)Array + Index));
+ break;
+ case AccessWidth16:
+ case AccessS3SaveWidth16:
+ IDS_HDT_CONSOLE (S3_TRACE, "0x%04x", *((UINT16*)Array + Index));
+ break;
+ case AccessWidth32:
+ case AccessS3SaveWidth32:
+ IDS_HDT_CONSOLE (S3_TRACE, "0x%08x", *((UINT32*)Array + Index));
+ break;
+ case AccessWidth64:
+ case AccessS3SaveWidth64:
+ IDS_HDT_CONSOLE (S3_TRACE, "0x%08x%08x", ((UINT32*) ((UINT64*)Array + Index))[1], ((UINT32*) ((UINT64*)Array + Index))[0]);
+ break;
+ default:
+ IDS_ERROR_TRAP;
+ }
+ if (Index < (Count - 1)) {
+ IDS_HDT_CONSOLE (S3_TRACE, ", ");
+ }
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Common/S3SaveState.h b/src/vendorcode/amd/agesa/f16kb/Proc/Common/S3SaveState.h
new file mode 100644
index 0000000..1801ef9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Common/S3SaveState.h
@@ -0,0 +1,365 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Various PCI service routines.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _S3SAVESTATE_H_
+#define _S3SAVESTATE_H_
+
+#pragma pack (push, 1)
+
+#ifndef S3_SCRIPT_DEBUG_CODE
+ #define S3_SCRIPT_DEBUG_CODE(Code) Code
+#endif
+
+/// Dispatch function ID repository
+typedef enum {
+ NbSmuIndirectWriteS3Script_ID = 1, ///< GNB SMU service request function ID.
+ NbSmuServiceRequestS3Script_ID, ///< GNB PCIe late restore function ID.
+ PcieLateRestoreS3Script_ID, ///< GNB SMU indirect write.
+ GnbSmuServiceRequestV4S3Script_ID, ///< SMU service request
+ GnbLibStallS3Script_ID, ///< Stall request
+ PcieLateRestoreTNS3Script_ID, ///< GNB PCIe late restore TN
+ PcieLateRestoreXXS3Script_ID_RSV1,
+ PcieLateRestoreXXS3Script_ID_RSV2,
+ PcieLateRestoreKBS3Script_ID, ///< GNB PCIe late restore KB
+ PcieLateRestoreXXS3Script_ID_RSV3,
+ GfxRequestSclkTNS3Script_ID, ///< SCLk setting
+ GnbSmuServiceRequestV7S3Script_ID ///< SMU service request
+} S3_DISPATCH_FUNCTION_ID;
+
+#define SAVE_STATE_IO_WRITE_OPCODE 0x00
+#define SAVE_STATE_IO_READ_WRITE_OPCODE 0x01
+#define SAVE_STATE_MEM_WRITE_OPCODE 0x02
+#define SAVE_STATE_MEM_READ_WRITE_OPCODE 0x03
+#define SAVE_STATE_PCI_CONFIG_WRITE_OPCODE 0x04
+#define SAVE_STATE_PCI_CONFIG_READ_WRITE_OPCODE 0x05
+#define SAVE_STATE_STALL_OPCODE 0x07
+#define SAVE_STATE_INFORMATION_OPCODE 0x0A
+#define SAVE_STATE_IO_POLL_OPCODE 0x0D
+#define SAVE_STATE_MEM_POLL_OPCODE 0x0E
+#define SAVE_STATE_PCI_CONFIG_POLL_OPCODE 0x0F
+#define SAVE_STATE_DISPATCH_OPCODE 0x20
+#define SAVE_STATE_BREAKPOINT_OPCODE 0x21
+
+
+#define S3_TABLE_LENGTH 8 * 1024
+#define S3_TABLE_LENGTH_INCREMENT 1 * 1024
+
+/// S3 Save Table
+typedef struct {
+ UINT16 TableLength; ///< Table Length
+ UINT32 SaveOffset; ///< Save Location
+ BOOLEAN Locked; ///< Locked
+} S3_SAVE_TABLE_HEADER;
+
+/// S3 write operation header
+typedef struct {
+ UINT16 OpCode; ///< Opcode
+ ACCESS_WIDTH Width; ///< Data width (byte, word, dword)
+ UINT64 Address; ///< Register address
+ UINT32 Count; ///< Write count
+} S3_WRITE_OP_HEADER;
+
+/// S3 Read and Write Operation header
+typedef struct {
+ UINT16 OpCode; ///< Opcode
+ ACCESS_WIDTH Width; ///< Data width (byte, word, dword)
+ UINT64 Address; ///< Register Address
+} S3_READ_WRITE_OP_HEADER;
+
+/// S3 Poll operation header
+typedef struct {
+ UINT16 OpCode; ///< Opcode
+ ACCESS_WIDTH Width; ///< Data width (byte, word, dword)
+ UINT64 Address; ///< Register address
+ UINT64 Delay; ///< Time delay
+} S3_POLL_OP_HEADER;
+
+/// Information operation header
+typedef struct {
+ UINT16 OpCode; ///< Opcode
+ UINT32 Length; ///< Length of info
+} S3_INFO_OP_HEADER;
+
+/// Dispatch operation header
+typedef struct {
+ UINT16 OpCode; ///< Opcode
+ UINT16 FunctionId; ///< Function ID
+ UINT16 Length; ///< Length in bytes of the context
+} S3_DISPATCH_OP_HEADER;
+
+
+typedef VOID S3_DISPATCH_FUNCTION (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 ContextLength,
+ IN VOID *Context
+ );
+
+/// Dispatch function table entry
+typedef struct {
+ UINT16 FunctionId; ///<Function ID
+ S3_DISPATCH_FUNCTION *Function; ///<Function pointer
+} S3_DISPATCH_FUNCTION_ENTRY;
+
+typedef AGESA_STATUS (*S3_SCRIPT_INIT) (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef AGESA_STATUS (*S3_SCRIPT_RESTORE) (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// S3 Script Configuration
+typedef struct {
+ S3_SCRIPT_INIT Init; ///< Script initialization
+ S3_SCRIPT_RESTORE Restore; ///< Script restore
+} S3_SCRIPT_CONFIGURATION;
+
+AGESA_STATUS
+S3ScriptInit (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+S3ScriptInitState (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+S3ScriptInitStateStub (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+S3ScriptRestore (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+S3ScriptRestoreState (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+S3ScriptRestoreStateStub (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+S3ScriptGetS3SaveTable (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT S3_SAVE_TABLE_HEADER **S3SaveTable
+ );
+
+VOID
+S3SaveDebugPrintHexArray (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN VOID *Array,
+ IN UINT32 Count,
+ IN ACCESS_WIDTH Width
+ );
+
+CHAR8*
+S3SaveDebugOpcodeString (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 Op
+ );
+
+AGESA_STATUS
+S3SaveStateSaveWriteOp (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 OpCode,
+ IN ACCESS_WIDTH Width,
+ IN UINT64 Address,
+ IN UINT32 Count,
+ IN VOID *Buffer
+ );
+
+AGESA_STATUS
+S3SaveStateSaveReadWriteOp (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 OpCode,
+ IN ACCESS_WIDTH Width,
+ IN UINT64 Address,
+ IN VOID *Data,
+ IN VOID *DataMask
+ );
+
+AGESA_STATUS
+S3SaveStateSavePollOp (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 OpCode,
+ IN ACCESS_WIDTH Width,
+ IN UINT64 Address,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN UINT64 Delay
+ );
+
+AGESA_STATUS
+S3SaveStateSaveInfoOp (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 OpCode,
+ IN UINT32 InformationLength,
+ IN VOID *Information
+ );
+
+AGESA_STATUS
+S3SaveStateSaveDispatchOp (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 OpCode,
+ IN UINT16 FunctionId,
+ IN UINT16 ContextLength,
+ IN VOID *Context
+ );
+
+//PCI write
+#define S3_SAVE_PCI_WRITE(StdHeader, Address, Width, DataPtr) \
+ S3SaveStateSaveWriteOp ( \
+ StdHeader, \
+ SAVE_STATE_PCI_CONFIG_WRITE_OPCODE, \
+ Width, \
+ Address.AddressValue, \
+ 1, \
+ DataPtr \
+ )
+
+//PCI read modify write
+#define S3_SAVE_PCI_RMW (StdHeader, Address, Width, DataPtr, DataMaskPtr) \
+ S3SaveStateSaveWriteOp ( \
+ StdHeader, \
+ SAVE_STATE_PCI_CONFIG_READ_WRITE_OPCODE, \
+ Width, \
+ Address.AddressValue, \
+ DataPtr, \
+ DataMask \
+ )
+
+//PCI read modify write
+#define S3_SAVE_PCI_POLL(StdHeader, Address, Width, DataPtr, DataMaskPtr, Delay) \
+ S3SaveStateSavePollOp ( \
+ StdHeader, \
+ SAVE_STATE_PCI_CONFIG_POLL_OPCODE, \
+ Width, \
+ Address.AddressValue, \
+ DataPtr, \
+ DataMask, \
+ Delay \
+ )
+
+//Memory/MMIO write
+#define S3_SAVE_MEM_WRITE(StdHeader, Address, Width, DataPtr) \
+ S3SaveStateSaveWriteOp ( \
+ StdHeader, \
+ SAVE_STATE_MEM_WRITE_OPCODE, \
+ Width, \
+ Address, \
+ 1, \
+ DataPtr \
+ )
+
+//Memory/MMIO read modify write
+#define S3_SAVE_MEM_RMW(StdHeader, Address, Width, DataPtr, DataMaskPtr) \
+ S3SaveStateSaveWriteOp ( \
+ StdHeader, \
+ SAVE_STATE_MEM_READ_WRITE_OPCODE, \
+ Width, \
+ Address, \
+ DataPtr, \
+ DataMask \
+ )
+
+//Memory/MMIO read modify write
+#define S3_SAVE_MEM_POLL(StdHeader, Address, Width, DataPtr, DataMaskPtr, Delay) \
+ S3SaveStateSavePollOp ( \
+ StdHeader, \
+ SAVE_STATE_MEM_POLL_OPCODE, \
+ Width, \
+ Address, \
+ DataPtr, \
+ DataMask, \
+ Delay \
+ )
+
+// I/O write
+#define S3_SAVE_IO_WRITE(StdHeader, Address, Width, DataPtr) \
+ S3SaveStateSaveWriteOp ( \
+ StdHeader, \
+ SAVE_STATE_IO_WRITE_OPCODE, \
+ Width, \
+ Address, \
+ 1, \
+ DataPtr \
+ )
+
+// Save information
+#define S3_SAVE_INFORMATION(StdHeader, InformationLength, Information) \
+ S3SaveStateSaveInfoOp ( \
+ StdHeader, \
+ SAVE_STATE_INFORMATION_OPCODE, \
+ InformationLength, \
+ Information \
+ )
+
+// Save information string S3_SAVE_INFORMATION_STRING (StdHeader, "Message")
+#define S3_SAVE_INFORMATION_STRING(StdHeader, Information) \
+ S3SaveStateSaveInfoOp ( \
+ StdHeader, \
+ SAVE_STATE_INFORMATION_OPCODE, \
+ sizeof (Information), \
+ Information \
+ )
+
+// Save dispatch function
+#define S3_SAVE_DISPATCH(StdHeader, FunctionId, ContextLength, Context) \
+ S3SaveStateSaveDispatchOp ( \
+ StdHeader, \
+ SAVE_STATE_DISPATCH_OPCODE, \
+ FunctionId, \
+ ContextLength, \
+ Context \
+ )
+
+#pragma pack (pop)
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Azalia/AzaliaEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Azalia/AzaliaEnv.c
new file mode 100644
index 0000000..2474a77
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Azalia/AzaliaEnv.c
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config FCH HD Audio Controller
+ *
+ * Init Azalia Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_AZALIA_AZALIAENV_FILECODE
+//
+// Declaration of local functions
+//
+
+/**
+ * FchInitEnvAzalia - Config Azalia controller before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvAzalia (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ if ( LocalCfgPtr->Azalia.AzaliaEnable == 1 ) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEB, AccessWidth8, (UINT32)~BIT0, 0);
+ } else {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEB, AccessWidth8, (UINT32)~BIT0, BIT0);
+ RwPci ((AZALIA_BUS_DEV_FUN << 16) + 0x4C, AccessWidth8, (UINT32)~BIT0, BIT0, StdHeader);
+
+ if ( LocalCfgPtr->Azalia.AzaliaMsiEnable) {
+ RwPci ((AZALIA_BUS_DEV_FUN << 16) + FCH_AZ_REG44, AccessWidth32, (UINT32)~BIT8, BIT8, StdHeader);
+ }
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Azalia/AzaliaLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Azalia/AzaliaLate.c
new file mode 100644
index 0000000..fa7c5bd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Azalia/AzaliaLate.c
@@ -0,0 +1,59 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config FCH HD Audio Controller
+ *
+ * Init Azalia Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_AZALIA_AZALIALATE_FILECODE
+
+/**
+ * FchInitLateAzalia - Prepare Azalia controller to boot to OS.
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateAzalia (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Azalia/AzaliaMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Azalia/AzaliaMid.c
new file mode 100644
index 0000000..2472893
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Azalia/AzaliaMid.c
@@ -0,0 +1,509 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config FCH HD Audio Controller
+ *
+ * Init Azalia Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_AZALIA_AZALIAMID_FILECODE
+//
+// Declaration of local functions
+//
+VOID
+ConfigureAzaliaPinCmd (
+ IN FCH_DATA_BLOCK *FchDataPtr,
+ IN UINT32 BAR0,
+ IN UINT8 ChannelNum
+ );
+
+VOID
+ConfigureAzaliaSetConfigD4Dword (
+ IN CODEC_ENTRY *TempAzaliaCodecEntryPtr,
+ IN UINT32 ChannelNumDword,
+ IN UINT32 BAR0,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * FchInitMidAzalia - Config Azalia controller after PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidAzalia (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 Index;
+ BOOLEAN EnableAzalia;
+ UINT32 PinRouting;
+ UINT8 ChannelNum;
+ UINT8 AzaliaTempVariableByte;
+ UINT16 AzaliaTempVariableWord;
+ UINT32 BAR0;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ EnableAzalia = FALSE;
+ ChannelNum = 0;
+ AzaliaTempVariableByte = 0;
+ AzaliaTempVariableWord = 0;
+ BAR0 = 0;
+
+ if ( LocalCfgPtr->Azalia.AzaliaEnable == 1 ) {
+ return;
+ } else {
+ RwPci ((AZALIA_BUS_DEV_FUN << 16) + FCH_AZ_REG04, AccessWidth8, (UINT32)~BIT1, BIT1, StdHeader);
+
+ if ( LocalCfgPtr->Azalia.AzaliaSsid != 0 ) {
+ RwPci ((AZALIA_BUS_DEV_FUN << 16) + FCH_AZ_REG2C, AccessWidth32, 0x00, LocalCfgPtr->Azalia.AzaliaSsid, StdHeader);
+ }
+
+ ReadPci ((AZALIA_BUS_DEV_FUN << 16) + FCH_AZ_REG10, AccessWidth32, &BAR0, StdHeader);
+
+ if ( BAR0 != 0 ) {
+ if ( BAR0 != 0xFFFFFFFF ) {
+ BAR0 &= ~(0x03FFF);
+ EnableAzalia = TRUE;
+ }
+ }
+ }
+
+ if ( EnableAzalia ) {
+ //
+ // Get SDIN Configuration
+ //
+ if ( LocalCfgPtr->Azalia.AzaliaConfig.AzaliaSdin0 == 2 ) {
+ RwMem (ACPI_MMIO_BASE + GPIO_BASE + 0xA7, AccessWidth8, 0, 0x3E);
+ RwMem (ACPI_MMIO_BASE + IOMUX_BASE + 0xA7, AccessWidth8, 0, 0x00);
+ } else {
+ RwMem (ACPI_MMIO_BASE + GPIO_BASE + 0xA7, AccessWidth8, 0, 0x0);
+ RwMem (ACPI_MMIO_BASE + IOMUX_BASE + 0xA7, AccessWidth8, 0, 0x01);
+ }
+
+ if ( LocalCfgPtr->Azalia.AzaliaConfig.AzaliaSdin1 == 2 ) {
+ RwMem (ACPI_MMIO_BASE + GPIO_BASE + 0xA8, AccessWidth8, 0, 0x3E);
+ RwMem (ACPI_MMIO_BASE + IOMUX_BASE + 0xA8, AccessWidth8, 0, 0x00);
+ } else {
+ RwMem (ACPI_MMIO_BASE + GPIO_BASE + 0xA8, AccessWidth8, 0, 0x0);
+ RwMem (ACPI_MMIO_BASE + IOMUX_BASE + 0xA8, AccessWidth8, 0, 0x01);
+ }
+
+ if ( LocalCfgPtr->Azalia.AzaliaConfig.AzaliaSdin2 == 2 ) {
+ RwMem (ACPI_MMIO_BASE + GPIO_BASE + 0xA9, AccessWidth8, 0, 0x3E);
+ RwMem (ACPI_MMIO_BASE + IOMUX_BASE + 0xA9, AccessWidth8, 0, 0x00);
+ } else {
+ RwMem (ACPI_MMIO_BASE + GPIO_BASE + 0xA9, AccessWidth8, 0, 0x0);
+ RwMem (ACPI_MMIO_BASE + IOMUX_BASE + 0xA9, AccessWidth8, 0, 0x01);
+ }
+
+ if ( LocalCfgPtr->Azalia.AzaliaConfig.AzaliaSdin3 == 2 ) {
+ RwMem (ACPI_MMIO_BASE + GPIO_BASE + 0xAA, AccessWidth8, 0, 0x3E);
+ RwMem (ACPI_MMIO_BASE + IOMUX_BASE + 0xAA, AccessWidth8, 0, 0x00);
+ } else {
+ RwMem (ACPI_MMIO_BASE + GPIO_BASE + 0xAA, AccessWidth8, 0, 0x0);
+ RwMem (ACPI_MMIO_BASE + IOMUX_BASE + 0xAA, AccessWidth8, 0, 0x01);
+ }
+
+ Index = 11;
+ do {
+ ReadMem ( BAR0 + FCH_AZ_BAR_REG08, AccessWidth8, &AzaliaTempVariableByte);
+ AzaliaTempVariableByte |= BIT0;
+ WriteMem (BAR0 + FCH_AZ_BAR_REG08, AccessWidth8, &AzaliaTempVariableByte);
+ FchStall (1000, StdHeader);
+ ReadMem (BAR0 + FCH_AZ_BAR_REG08, AccessWidth8, &AzaliaTempVariableByte);
+ Index--;
+ } while ((! (AzaliaTempVariableByte & BIT0)) && (Index > 0) );
+
+ if ( Index == 0 ) {
+ return;
+ }
+
+ FchStall (1000, StdHeader);
+ ReadMem ( BAR0 + FCH_AZ_BAR_REG0E, AccessWidth16, &AzaliaTempVariableWord);
+ if ( AzaliaTempVariableWord & 0x0F ) {
+
+ //
+ //at least one azalia codec found
+ //
+ //PinRouting = LocalCfgPtr->Azalia.AZALIA_CONFIG.AzaliaSdinPin;
+ //new structure need make up PinRouting
+ //need adjust later!!!
+ //
+ PinRouting = 0;
+ PinRouting = (UINT32 )LocalCfgPtr->Azalia.AzaliaConfig.AzaliaSdin3;
+ PinRouting <<= 8;
+ PinRouting |= (UINT32 )LocalCfgPtr->Azalia.AzaliaConfig.AzaliaSdin2;
+ PinRouting <<= 8;
+ PinRouting |= (UINT32 )LocalCfgPtr->Azalia.AzaliaConfig.AzaliaSdin1;
+ PinRouting <<= 8;
+ PinRouting |= (UINT32 )LocalCfgPtr->Azalia.AzaliaConfig.AzaliaSdin0;
+
+ do {
+ if ( ( ! (PinRouting & BIT0) ) && (PinRouting & BIT1) ) {
+ ConfigureAzaliaPinCmd (LocalCfgPtr, BAR0, ChannelNum);
+ }
+ PinRouting >>= 8;
+ ChannelNum++;
+ } while ( ChannelNum != 4 );
+ } else {
+ //
+ //No Azalia codec found
+ //
+ if ( LocalCfgPtr->Azalia.AzaliaEnable != 2 ) {
+ EnableAzalia = FALSE;
+ }
+ }
+ }
+
+ if ( EnableAzalia ) {
+ if ( LocalCfgPtr->Azalia.AzaliaSnoop == 1 ) {
+ RwPci ((AZALIA_BUS_DEV_FUN << 16) + 0x42, AccessWidth8, 0xFF, BIT1 + BIT0, StdHeader);
+ }
+ RwPci ((AZALIA_BUS_DEV_FUN << 16) + FCH_AZ_REG44 + 1, AccessWidth8, 0xFB, BIT2, StdHeader);
+ } else {
+ //
+ //disable Azalia controller
+ //
+ RwPci ((AZALIA_BUS_DEV_FUN << 16) + FCH_AZ_REG04, AccessWidth16, 0, 0, StdHeader);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEB, AccessWidth8, (UINT32)~BIT0, 0);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEB, AccessWidth8, (UINT32)~BIT0, 0);
+ }
+}
+
+/**
+ * Pin Config for ALC880, ALC882 and ALC883.
+ *
+ *
+ *
+ */
+CODEC_ENTRY AzaliaCodecAlc882Table[] =
+{
+ {0x14, 0x01014010},
+ {0x15, 0x01011012},
+ {0x16, 0x01016011},
+ {0x17, 0x01012014},
+ {0x18, 0x01A19030},
+ {0x19, 0x411111F0},
+ {0x1a, 0x01813080},
+ {0x1b, 0x411111F0},
+ {0x1C, 0x411111F0},
+ {0x1d, 0x411111F0},
+ {0x1e, 0x01441150},
+ {0x1f, 0x01C46160},
+ {0xff, 0xffffffff}
+};
+
+/**
+ * Pin Config for ALC0262.
+ *
+ *
+ *
+ */
+CODEC_ENTRY AzaliaCodecAlc262Table[] =
+{
+ {0x14, 0x01014010},
+ {0x15, 0x411111F0},
+ {0x16, 0x411111F0},
+ {0x18, 0x01A19830},
+ {0x19, 0x02A19C40},
+ {0x1a, 0x01813031},
+ {0x1b, 0x02014C20},
+ {0x1c, 0x411111F0},
+ {0x1d, 0x411111F0},
+ {0x1e, 0x0144111E},
+ {0x1f, 0x01C46150},
+ {0xff, 0xffffffff}
+};
+
+/**
+ * Pin Config for ALC0269.
+ *
+ *
+ *
+ */
+CODEC_ENTRY AzaliaCodecAlc269Table[] =
+{
+ {0x12, 0x99A308F0},
+ {0x14, 0x99130010},
+ {0x15, 0x0121101F},
+ {0x16, 0x99036120},
+ {0x18, 0x01A19850},
+ {0x19, 0x99A309F0},
+ {0x1a, 0x01813051},
+ {0x1b, 0x0181405F},
+ {0x1d, 0x40134601},
+ {0x1e, 0x01442130},
+ {0x11, 0x99430140},
+ {0x20, 0x0030FFFF},
+ {0xff, 0xffffffff}
+};
+
+/**
+ * Pin Config for ALC0861.
+ *
+ *
+ *
+ */
+CODEC_ENTRY AzaliaCodecAlc861Table[] =
+{
+ {0x01, 0x8086C601},
+ {0x0B, 0x01014110},
+ {0x0C, 0x01813140},
+ {0x0D, 0x01A19941},
+ {0x0E, 0x411111F0},
+ {0x0F, 0x02214420},
+ {0x10, 0x02A1994E},
+ {0x11, 0x99330142},
+ {0x12, 0x01451130},
+ {0x1F, 0x411111F0},
+ {0x20, 0x411111F0},
+ {0x23, 0x411111F0},
+ {0xff, 0xffffffff}
+};
+
+/**
+ * Pin Config for ALC0889.
+ *
+ *
+ *
+ */
+CODEC_ENTRY AzaliaCodecAlc889Table[] =
+{
+ {0x11, 0x411111F0},
+ {0x14, 0x01014010},
+ {0x15, 0x01011012},
+ {0x16, 0x01016011},
+ {0x17, 0x01013014},
+ {0x18, 0x01A19030},
+ {0x19, 0x411111F0},
+ {0x1a, 0x411111F0},
+ {0x1b, 0x411111F0},
+ {0x1C, 0x411111F0},
+ {0x1d, 0x411111F0},
+ {0x1e, 0x01442150},
+ {0x1f, 0x01C42160},
+ {0xff, 0xffffffff}
+};
+
+/**
+ * Pin Config for ADI1984.
+ *
+ *
+ *
+ */
+CODEC_ENTRY AzaliaCodecAd1984Table[] =
+{
+ {0x11, 0x0221401F},
+ {0x12, 0x90170110},
+ {0x13, 0x511301F0},
+ {0x14, 0x02A15020},
+ {0x15, 0x50A301F0},
+ {0x16, 0x593301F0},
+ {0x17, 0x55A601F0},
+ {0x18, 0x55A601F0},
+ {0x1A, 0x91F311F0},
+ {0x1B, 0x014511A0},
+ {0x1C, 0x599301F0},
+ {0xff, 0xffffffff}
+};
+
+/**
+ * FrontPanel Config table list
+ *
+ *
+ *
+ */
+CODEC_ENTRY FrontPanelAzaliaCodecTableList[] =
+{
+ {0x19, 0x02A19040},
+ {0x1b, 0x02214020},
+ {0xff, 0xffffffff}
+};
+
+/**
+ * Current HD Audio support codec list
+ *
+ *
+ *
+ */
+CODEC_TBL_LIST AzaliaCodecTableList[] =
+{
+ {0x010ec0880, &AzaliaCodecAlc882Table[0]},
+ {0x010ec0882, &AzaliaCodecAlc882Table[0]},
+ {0x010ec0883, &AzaliaCodecAlc882Table[0]},
+ {0x010ec0885, &AzaliaCodecAlc882Table[0]},
+ {0x010ec0889, &AzaliaCodecAlc889Table[0]},
+ {0x010ec0262, &AzaliaCodecAlc262Table[0]},
+ {0x010ec0269, &AzaliaCodecAlc269Table[0]},
+ {0x010ec0861, &AzaliaCodecAlc861Table[0]},
+ {0x011d41984, &AzaliaCodecAd1984Table[0]},
+ { (UINT32) 0x0FFFFFFFF, (CODEC_ENTRY*) (UINTN)0x0FFFFFFFF}
+};
+
+/**
+ * ConfigureAzaliaPinCmd - Configuration HD Audio PIN Command
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ * @param[in] BAR0 HD Audio BAR0 base address.
+ * @param[in] ChannelNum Channel Number.
+ *
+ */
+VOID
+ConfigureAzaliaPinCmd (
+ IN FCH_DATA_BLOCK *FchDataPtr,
+ IN UINT32 BAR0,
+ IN UINT8 ChannelNum
+ )
+{
+ UINT32 AzaliaTempVariable;
+ UINT32 ChannelNumDword;
+ CODEC_TBL_LIST *TempAzaliaOemCodecTablePtr;
+ CODEC_ENTRY *TempAzaliaCodecEntryPtr;
+
+ if ( (FchDataPtr->Azalia.AzaliaPinCfg) != 1 ) {
+ return;
+ }
+
+ ChannelNumDword = ChannelNum << 28;
+ AzaliaTempVariable = 0xF0000;
+ AzaliaTempVariable |= ChannelNumDword;
+
+ WriteMem (BAR0 + FCH_AZ_BAR_REG60, AccessWidth32, &AzaliaTempVariable);
+ FchStall (600, FchDataPtr->StdHeader);
+ ReadMem (BAR0 + FCH_AZ_BAR_REG64, AccessWidth32, &AzaliaTempVariable);
+
+ if ( ((FchDataPtr->Azalia.AzaliaOemCodecTablePtr) == NULL) || ((FchDataPtr->Azalia.AzaliaOemCodecTablePtr) == ((CODEC_TBL_LIST*) (UINTN)0xFFFFFFFF))) {
+ TempAzaliaOemCodecTablePtr = (CODEC_TBL_LIST*) (&AzaliaCodecTableList[0]);
+ } else {
+ TempAzaliaOemCodecTablePtr = (CODEC_TBL_LIST*) FchDataPtr->Azalia.AzaliaOemCodecTablePtr;
+ }
+
+ while ( TempAzaliaOemCodecTablePtr->CodecId != 0xFFFFFFFF ) {
+ if ( TempAzaliaOemCodecTablePtr->CodecId == AzaliaTempVariable ) {
+ break;
+ } else {
+ ++TempAzaliaOemCodecTablePtr;
+ }
+ }
+
+ if ( TempAzaliaOemCodecTablePtr->CodecId != 0xFFFFFFFF ) {
+ TempAzaliaCodecEntryPtr = (CODEC_ENTRY*) TempAzaliaOemCodecTablePtr->CodecTablePtr;
+ if ( ((FchDataPtr->Azalia.AzaliaOemCodecTablePtr) == NULL) || ((FchDataPtr->Azalia.AzaliaOemCodecTablePtr) == ((CODEC_TBL_LIST*) (UINTN)0xFFFFFFFF)) ) {
+ TempAzaliaCodecEntryPtr = (CODEC_ENTRY*) (TempAzaliaCodecEntryPtr);
+ }
+
+ ConfigureAzaliaSetConfigD4Dword (TempAzaliaCodecEntryPtr, ChannelNumDword, BAR0, FchDataPtr->StdHeader);
+
+ if ( FchDataPtr->Azalia.AzaliaFrontPanel != 1 ) {
+ if ( (FchDataPtr->Azalia.AzaliaFrontPanel == 2) || (FchDataPtr->Azalia.FrontPanelDetected == 1) ) {
+ if ( ((FchDataPtr->Azalia.AzaliaOemFpCodecTablePtr) == NULL) || ((FchDataPtr->Azalia.AzaliaOemFpCodecTablePtr) == (VOID*) (UINTN)0xFFFFFFFF) ) {
+ TempAzaliaCodecEntryPtr = (CODEC_ENTRY*) (&FrontPanelAzaliaCodecTableList[0]);
+ } else {
+ TempAzaliaCodecEntryPtr = (CODEC_ENTRY*) FchDataPtr->Azalia.AzaliaOemFpCodecTablePtr;
+ }
+
+ ConfigureAzaliaSetConfigD4Dword (TempAzaliaCodecEntryPtr, ChannelNumDword, BAR0, FchDataPtr->StdHeader);
+ }
+ }
+ }
+}
+
+/**
+ * ConfigureAzaliaSetConfigD4Dword - Configuration HD Audio Codec table
+ *
+ *
+ * @param[in] TempAzaliaCodecEntryPtr HD Audio Codec table structure pointer.
+ * @param[in] ChannelNumDword HD Audio Channel Number.
+ * @param[in] BAR0 HD Audio BAR0 base address.
+ * @param[in] StdHeader
+ *
+ */
+VOID
+ConfigureAzaliaSetConfigD4Dword (
+ IN CODEC_ENTRY *TempAzaliaCodecEntryPtr,
+ IN UINT32 ChannelNumDword,
+ IN UINT32 BAR0,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 TempByte1;
+ UINT8 TempByte2;
+ UINT8 Index;
+ UINT32 TempDword1;
+ UINT32 TempDword2;
+
+ TempDword1 = 0;
+ TempDword2 = 0;
+
+ while ( (TempAzaliaCodecEntryPtr->Nid) != 0xFF ) {
+ TempByte1 = 0x20;
+ if ( (TempAzaliaCodecEntryPtr->Nid) == 0x1 ) {
+ TempByte1 = 0x24;
+ }
+
+ TempDword1 = TempAzaliaCodecEntryPtr->Nid;
+ TempDword1 &= 0xff;
+ TempDword1 <<= 20;
+ TempDword1 |= ChannelNumDword;
+ TempDword1 |= (0x700 << 8);
+
+ for ( Index = 4; Index > 0; Index-- ) {
+ do {
+ ReadMem (BAR0 + FCH_AZ_BAR_REG68, AccessWidth32, &TempDword2);
+ } while ( (TempDword2 & BIT0) != 0 );
+
+ TempByte2 = (UINT8) (( (TempAzaliaCodecEntryPtr->Byte40) >> ((4 - Index) * 8 ) ) & 0xff);
+ TempDword1 = (TempDword1 & 0xFFFF0000) + ((TempByte1 - Index) << 8) + TempByte2;
+ WriteMem (BAR0 + FCH_AZ_BAR_REG60, AccessWidth32, &TempDword1);
+ FchStall (60, StdHeader);
+ }
+
+ ++TempAzaliaCodecEntryPtr;
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Azalia/AzaliaReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Azalia/AzaliaReset.c
new file mode 100644
index 0000000..0966e9f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Azalia/AzaliaReset.c
@@ -0,0 +1,61 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config FCH HD Audio Controller
+ *
+ * Init Azalia Controller features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_AZALIA_AZALIARESET_FILECODE
+
+/**
+ * FchInitResetAzalia - Config Azalia controller during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr
+ *
+ */
+VOID
+FchInitResetF1 (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/AcpiLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/AcpiLib.c
new file mode 100644
index 0000000..905025f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/AcpiLib.c
@@ -0,0 +1,242 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH ACPI lib
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_COMMON_ACPILIB_FILECODE
+//
+//
+// Routine Description:
+//
+// Locate ACPI table
+//
+// Arguments:
+//
+// Signature - table signature
+//
+//Returns:
+//
+// pointer to ACPI table
+//
+//
+VOID*
+AcpiLocateTable (
+ IN UINT32 Signature
+ )
+{
+ UINT32 Index;
+ UINT32 *RsdPtr;
+ UINT32 *Rsdt;
+ UINTN TableOffset;
+ DESCRIPTION_HEADER *CurrentTable;
+
+ RsdPtr = (UINT32*) (UINTN) FCHOEM_ACPI_TABLE_RANGE_LOW;
+ Rsdt = NULL;
+ do {
+ if ( *RsdPtr == Int32FromChar('R','S','D',' ') && *(RsdPtr + 1) == Int32FromChar('P','T','R',' ') ) { /* ' DSR' & ' RTP' */
+ Rsdt = (UINT32*) (UINTN) ((RSDP_HEADER*)RsdPtr)->RsdtAddress;
+ break;
+ }
+ RsdPtr += 4;
+ } while ( RsdPtr <= (UINT32*) (UINTN) FCHOEM_ACPI_TABLE_RANGE_HIGH );
+
+ if ( Rsdt != NULL && AcpiGetTableCheckSum (Rsdt) == 0 ) {
+ for ( Index = 0; Index < (((DESCRIPTION_HEADER*)Rsdt)->Length - sizeof (DESCRIPTION_HEADER)) / 4; Index++ ) {
+ TableOffset = *(UINTN*) ((UINT8*)Rsdt + sizeof (DESCRIPTION_HEADER) + Index * 4);
+ CurrentTable = (DESCRIPTION_HEADER*)TableOffset;
+ if ( CurrentTable->Signature == Signature ) {
+ return CurrentTable;
+ }
+ }
+ }
+ return NULL;
+}
+
+//
+//
+// Routine Description:
+//
+// Update table CheckSum
+//
+// Arguments:
+//
+// TablePtr - table pointer
+//
+// Returns:
+//
+// none
+//
+//
+VOID
+AcpiSetTableCheckSum (
+ IN VOID *TablePtr
+ )
+{
+ UINT8 CheckSum;
+
+ CheckSum = 0;
+ ((DESCRIPTION_HEADER*)TablePtr)->CheckSum = 0;
+ CheckSum = AcpiGetTableCheckSum (TablePtr);
+ ((DESCRIPTION_HEADER*)TablePtr)->CheckSum = (UINT8) (FCHOEM_ACPI_BYTE_CHECHSUM - CheckSum);
+}
+
+//
+//
+// Routine Description:
+//
+// Get table CheckSum - Get ACPI table checksum
+//
+// Arguments:
+//
+// TablePtr - table pointer
+//
+// Returns:
+//
+// none
+//
+//
+UINT8
+AcpiGetTableCheckSum (
+ IN VOID *TablePtr
+ )
+{
+ return GetByteSum (TablePtr, ((DESCRIPTION_HEADER*)TablePtr)->Length);
+}
+
+
+//
+//
+// Routine Description:
+//
+// GetByteSum - Get BYTE checksum value
+//
+// Arguments:
+//
+// DataPtr - table pointer
+// Length - table length
+//
+// Returns:
+//
+// CheckSum - CheckSum value
+//
+//
+UINT8
+GetByteSum (
+ IN VOID *DataPtr,
+ IN UINT32 Length
+ )
+{
+ UINT32 Index;
+ UINT8 CheckSum;
+
+ CheckSum = 0;
+ for ( Index = 0; Index < Length; Index++ ) {
+ CheckSum = CheckSum + (*((UINT8*)DataPtr + Index));
+ }
+ return CheckSum;
+}
+
+//
+//
+// Routine Description:
+//
+// GetFchAcpiMmioBase - Get FCH HwAcpi MMIO Base Address
+//
+// Arguments:
+//
+// AcpiMmioBase - HwAcpi MMIO Base Address
+// StdHeader - Amd Stand Header
+//
+// Returns:
+//
+// AcpiMmioBase - HwAcpi MMIO Base Address
+//
+//
+VOID
+GetFchAcpiMmioBase (
+ OUT UINT32 *AcpiMmioBase,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 AcpiMmioBaseAddressDword;
+
+ ReadPmio (FCH_PMIOA_REG24 + 2, AccessWidth16, &AcpiMmioBaseAddressDword, StdHeader);
+ *AcpiMmioBase = AcpiMmioBaseAddressDword << 16;
+}
+
+//
+//
+// Routine Description:
+//
+// GetFchAcpiPmBase - Get FCH HwAcpi PM Base Address
+//
+// Arguments:
+//
+// AcpiPmBase - HwAcpi PM Base Address
+// StdHeader - Amd Stand Header
+//
+// Returns:
+//
+// AcpiPmBase - HwAcpi PM Base Address
+//
+//
+VOID
+GetFchAcpiPmBase (
+ OUT UINT16 *AcpiPmBase,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ ReadPmio (FCH_PMIOA_REG60, AccessWidth16, AcpiPmBase, StdHeader);
+}
+
+
+UINT8
+ReadFchSleepType (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 Value16;
+ ReadPmio (FCH_PMIOA_REG62, AccessWidth16, &Value16, StdHeader);
+ LibAmdIoRead (AccessWidth16, Value16, &Value16, StdHeader);
+ return (UINT8) ((Value16 >> 10) & 7);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/AcpiLib.h b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/AcpiLib.h
new file mode 100644
index 0000000..5c7f375
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/AcpiLib.h
@@ -0,0 +1,91 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH ACPI lib
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#ifndef _FCH_ACPILIB_H_
+#define _FCH_ACPILIB_H_
+///
+/// RSDP - ACPI 2.0 table RSDP
+///
+typedef struct _RSDP_HEADER {
+ UINT64 Signature; ///< RSDP signature "RSD PTR"
+ UINT8 CheckSum; ///< checksum of the first 20 bytes
+ UINT8 OEMID[6]; ///< OEM ID
+ UINT8 Revision; ///< 0 for APCI 1.0, 2 for ACPI 2.0
+ UINT32 RsdtAddress; ///< physical address of RSDT
+ UINT32 Length; ///< total length of RSDP (including extended part)
+ UINT64 XsdtAddress; ///< physical address of XSDT
+ UINT8 ExtendedCheckSum; ///< chechsum of whole table
+ UINT8 Reserved[3]; ///< Reserved
+} RSDP_HEADER;
+
+///
+/// DESCRIPTION_HEADER - ACPI common table header
+///
+typedef struct _DESCRIPTION_HEADER {
+ UINT32 Signature; ///< ACPI signature (4 ASCII characters)
+ UINT32 Length; ///< Length of table, in bytes, including header
+ UINT8 Revision; ///< ACPI Specification minor version #
+ UINT8 CheckSum; ///< To make sum of entire table == 0
+ UINT8 OemId[6]; ///< OEM identification
+ UINT8 OemTableId[8]; ///< OEM table identification
+ UINT32 OemRevision; ///< OEM revision number
+ UINT32 CreatorId; ///< ASL compiler vendor ID
+ UINT32 CreatorRevision; ///< ASL compiler revision number
+} DESCRIPTION_HEADER;
+
+///
+/// _AcpiRegWrite - ACPI MMIO register R/W structure
+///
+typedef struct _ACPI_REG_WRITE {
+ UINT8 MmioBase; /// MmioBase: Index of Fch block (For instance GPIO_BASE:0x01 SMI_BASE:0x02)
+ UINT8 MmioReg; /// MmioReg : Register index
+ UINT8 DataAndMask; /// DataANDMask : AND Register Data
+ UINT8 DataOrMask; /// DataOrMask : Or Register Data
+} ACPI_REG_WRITE;
+
+VOID* AcpiLocateTable (IN UINT32 Signature);
+VOID AcpiSetTableCheckSum (IN VOID *TablePtr);
+UINT8 AcpiGetTableCheckSum (IN VOID *TablePtr);
+UINT8 GetByteSum (IN VOID *DataPtr, IN UINT32 Length);
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchBiosRamUsage.h b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchBiosRamUsage.h
new file mode 100644
index 0000000..60e40d6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchBiosRamUsage.h
@@ -0,0 +1,67 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH BIOS Ram usage
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#ifndef _FCH_BIOS_RAM_USAGE_H_
+#define _FCH_BIOS_RAM_USAGE_H_
+
+#define RESTORE_MEMORY_CONTROLLER_START 0
+#define XHCI_REGISTER_BAR00 0xD0
+#define XHCI_REGISTER_BAR01 0xD1
+#define XHCI_REGISTER_BAR02 0xD2
+#define XHCI_REGISTER_BAR03 0xD3
+#define XHCI_REGISTER_04H 0xD4
+#define XHCI_REGISTER_0CH 0xD5
+#define XHCI_REGISTER_3CH 0xD6
+#define XHCI1_REGISTER_BAR00 0xE0
+#define XHCI1_REGISTER_BAR01 0xE1
+#define XHCI1_REGISTER_BAR02 0xE2
+#define XHCI1_REGISTER_BAR03 0xE3
+#define XHCI1_REGISTER_04H 0xE4
+#define XHCI1_REGISTER_0CH 0xE5
+#define XHCI1_REGISTER_3CH 0xE6
+#define RTC_WORKAROUND_DATA_START 0xF0
+#define BOOT_TIME_FLAG_SEC 0xF8
+#define BOOT_TIME_FLAG_INT19 0xFC
+
+#endif
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchCommon.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchCommon.c
new file mode 100644
index 0000000..c8f948d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchCommon.c
@@ -0,0 +1,47 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH common
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "heapManager.h"
+#define FILECODE PROC_FCH_COMMON_FCHCOMMON_FILECODE
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchCommonCfg.h b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchCommonCfg.h
new file mode 100644
index 0000000..7376a96
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchCommonCfg.h
@@ -0,0 +1,1219 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH Function Support Definition
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#ifndef _FCH_COMMON_CFG_H_
+#define _FCH_COMMON_CFG_H_
+
+#pragma pack (push, 1)
+
+//-----------------------------------------------------------------------------
+// FCH DEFINITIONS AND MACROS
+//-----------------------------------------------------------------------------
+
+//
+// FCH Component Data Structure Definitions
+//
+
+/// PCI_ADDRESS - PCI access structure
+#define PCI_ADDRESS(bus, dev, func, reg) \
+ (UINT32) ( (((UINT32)bus) << 24) + (((UINT32)dev) << 19) + (((UINT32)func) << 16) + ((UINT32)reg) )
+
+#define CPUID_FMF 0x80000001ul // Family Model Features information
+///
+/// - Byte Register R/W structure
+///
+typedef struct _REG8_MASK {
+ UINT8 RegIndex; /// RegIndex - Reserved
+ UINT8 AndMask; /// AndMask - Reserved
+ UINT8 OrMask; /// OrMask - Reserved
+} REG8_MASK;
+
+
+///
+/// PCIE Reset Block
+///
+typedef enum {
+ NbBlock, ///< Reset for NB PCIE
+ FchBlock ///< Reset for FCH GPP
+} RESET_BLOCK;
+
+///
+/// PCIE Reset Operation
+///
+typedef enum {
+ DeassertReset, ///< DeassertRese - Deassert reset
+ AssertReset ///< AssertReset - Assert reset
+} RESET_OP;
+
+
+///
+/// SD structure
+///
+typedef struct {
+ SD_MODE SdConfig; ///< SD Mode configuration
+ /// @li <b>00</b> - Disabled
+ /// @li <b>00</b> - AMDA
+ /// @li <b>01</b> - DMA
+ /// @li <b>10</b> - PIO
+ ///
+ UINT8 SdSpeed; ///< SD Speed
+ /// @li <b>0</b> - Low speed
+ /// @li <b>1</b> - High speed
+ ///
+ UINT8 SdBitWidth; ///< SD Bit Width
+ /// @li <b>0</b> - 32BIT clear 23
+ /// @li <b>1</b> - 64BIT, set 23,default
+ ///
+ UINT32 SdSsid; ///< SD Subsystem ID
+ SD_CLOCK_CONTROL SdClockControl; ///< SD Clock Control
+ BOOLEAN SdClockMultiplier; ///< SD Clock Multiplier enable/disable
+ UINT8 SdReTuningMode; ///< SD Re-tuning modes select
+ /// @li <b>0</b> - mode 1
+ /// @li <b>1</b> - mode 2
+ /// @li <b>2</b> - mode 3
+ UINT8 SdHostControllerVersion; ///< SD controller Version
+ /// @li <b>1</b> - SD 2.0
+ /// @li <b>2</b> - SD 3.0
+ UINT8 SdrCapabilities; ///< SDR Capability mode select
+ /// @li <b>00</b> - SDR25/15
+ /// @li <b>01</b> - SDR50
+ /// @li <b>11</b> - SDR104
+} FCH_SD;
+
+///
+/// CODEC_ENTRY - Fch HD Audio OEM Codec structure
+///
+typedef struct _CODEC_ENTRY {
+ UINT8 Nid; /// Nid - Reserved
+ UINT32 Byte40; /// Byte40 - Reserved
+} CODEC_ENTRY;
+
+///
+/// CODEC_TBL_LIST - Fch HD Audio Codec table list
+///
+typedef struct _CODEC_TBL_LIST {
+ UINT32 CodecId; /// CodecID - Codec ID
+ CODEC_ENTRY* CodecTablePtr; /// CodecTablePtr - Codec table pointer
+} CODEC_TBL_LIST;
+
+///
+/// AZALIA_PIN - HID Azalia or GPIO define structure.
+///
+typedef struct _AZALIA_PIN {
+ UINT8 AzaliaSdin0; ///< AzaliaSdin0
+ /// @par
+ /// @li <b>00</b> - GPIO PIN
+ /// @li <b>10</b> - As a Azalia SDIN pin
+
+ UINT8 AzaliaSdin1; ///< AzaliaSdin1
+ /// @par
+ /// SDIN1 is define at BIT2 & BIT3
+ /// @li <b>00</b> - GPIO PIN
+ /// @li <b>10</b> - As a Azalia SDIN pin
+
+ UINT8 AzaliaSdin2; ///< AzaliaSdin2
+ /// @par
+ /// SDIN2 is define at BIT4 & BIT5
+ /// @li <b>00</b> - GPIO PIN
+ /// @li <b>10</b> - As a Azalia SDIN pin
+
+ UINT8 AzaliaSdin3; ///< AzaliaSdin3
+ /// @par
+ /// SDIN3 is define at BIT6 & BIT7
+ /// @li <b>00</b> - GPIO PIN
+ /// @li <b>10</b> - As a Azalia SDIN pin
+} AZALIA_PIN;
+
+///
+/// Azalia structure
+///
+typedef struct {
+ UINT8 AzaliaEnable; ///< AzaliaEnable - Azalia function configuration
+ BOOLEAN AzaliaMsiEnable; ///< AzaliaMsiEnable - Azalia MSI capability
+ UINT32 AzaliaSsid; ///< AzaliaSsid - Azalia Subsystem ID
+ UINT8 AzaliaPinCfg; ///< AzaliaPinCfg - Azalia Controller SDIN pin Configuration
+ /// @par
+ /// @li <b>0</b> - disable
+ /// @li <b>1</b> - enable
+
+ UINT8 AzaliaFrontPanel; ///< AzaliaFrontPanel - Azalia Controller Front Panel Configuration
+ /// @par
+ /// Support Front Panel configuration
+ /// @li <b>0</b> - Auto
+ /// @li <b>1</b> - disable
+ /// @li <b>2</b> - enable
+
+ UINT8 FrontPanelDetected; ///< FrontPanelDetected - Force Azalia Controller Front Panel Configuration
+ /// @par
+ /// Force Front Panel configuration
+ /// @li <b>0</b> - Not Detected
+ /// @li <b>1</b> - Detected
+
+ UINT8 AzaliaSnoop; ///< AzaliaSnoop - Azalia Controller Snoop feature Configuration
+ /// @par
+ /// Azalia Controller Snoop feature Configuration
+ /// @li <b>0</b> - disable
+ /// @li <b>1</b> - enable
+
+ UINT8 AzaliaDummy; /// AzaliaDummy - Reserved */
+
+ AZALIA_PIN AzaliaConfig; /// AzaliaConfig - Azaliz Pin Configuration
+
+///
+/// AZOEMTBL - Azalia Controller OEM Codec Table Pointer
+///
+ CODEC_TBL_LIST *AzaliaOemCodecTablePtr; /// AzaliaOemCodecTablePtr - Oem Azalia Codec Table Pointer
+
+///
+/// AZOEMFPTBL - Azalia Controller Front Panel OEM Table Pointer
+///
+ VOID *AzaliaOemFpCodecTablePtr; /// AzaliaOemFpCodecTablePtr - Oem Front Panel Codec Table Pointer
+} FCH_AZALIA;
+
+///
+/// _SPI_DEVICE_PROFILE Spi Device Profile structure
+///
+typedef struct _SPI_DEVICE_PROFILE {
+ UINT32 JEDEC_ID; /// JEDEC ID
+ UINT32 RomSize; /// ROM Size
+ UINT32 SectorSize; /// Sector Size
+ UINT16 MaxNormalSpeed; /// Max Normal Speed
+ UINT16 MaxFastSpeed; /// Max Fast Speed
+ UINT16 MaxDualSpeed; /// Max Dual Speed
+ UINT16 MaxQuadSpeed; /// Max Quad Speed
+ UINT8 QeReadRegister; /// QE Read Register
+ UINT8 QeWriteRegister; /// QE Write Register
+ UINT8 QeOperateSize; /// QE Operate Size 1byte/2bytes
+ UINT16 QeLocation; // QE Location in the register
+} SPI_DEVICE_PROFILE;
+
+///
+/// _SPI_CONTROLLER_PROFILE Spi Device Profile structure
+///
+typedef struct _SPI_CONTROLLER_PROFILE {
+// UINT32 SPI_CONTROLLER_ID; /// SPI Controller ID
+ UINT16 FifoSize; /// FIFO Size
+ UINT16 MaxNormalSpeed; /// Max Normal Speed
+ UINT16 MaxFastSpeed; /// Max Fast Speed
+ UINT16 MaxDualSpeed; /// Max Dual Speed
+ UINT16 MaxQuadSpeed; /// Max Quad Speed
+} SPI_CONTROLLER_PROFILE;
+
+///
+/// SPI structure
+///
+typedef struct {
+ BOOLEAN LpcMsiEnable; ///< LPC MSI capability
+ UINT32 LpcSsid; ///< LPC Subsystem ID
+ UINT32 RomBaseAddress; ///< SpiRomBaseAddress
+ /// @par
+ /// SPI ROM BASE Address
+ ///
+ UINT8 SpiSpeed; ///< SpiSpeed - Spi Frequency
+ /// @par
+ /// SPI Speed [1.0] - the clock speed for non-fast read command
+ /// @li <b>00</b> - 66Mhz
+ /// @li <b>01</b> - 33Mhz
+ /// @li <b>10</b> - 22Mhz
+ /// @li <b>11</b> - 16.5Mhz
+ ///
+ UINT8 SpiFastSpeed; ///< FastSpeed - Spi Fast Speed feature
+ /// SPIFastSpeed [1.0] - the clock speed for Fast Speed Feature
+ /// @li <b>00</b> - 66Mhz
+ /// @li <b>01</b> - 33Mhz
+ /// @li <b>10</b> - 22Mhz
+ /// @li <b>11</b> - 16.5Mhz
+ ///
+ UINT8 WriteSpeed; ///< WriteSpeed - Spi Write Speed
+ /// @par
+ /// WriteSpeed [1.0] - the clock speed for Spi write command
+ /// @li <b>00</b> - 66Mhz
+ /// @li <b>01</b> - 33Mhz
+ /// @li <b>10</b> - 22Mhz
+ /// @li <b>11</b> - 16.5Mhz
+ ///
+ UINT8 SpiMode; ///< SpiMode - Spi Mode Setting
+ /// @par
+ /// @li <b>101</b> - Qual-io 1-4-4
+ /// @li <b>100</b> - Dual-io 1-2-2
+ /// @li <b>011</b> - Qual-io 1-1-4
+ /// @li <b>010</b> - Dual-io 1-1-2
+ /// @li <b>111</b> - FastRead
+ /// @li <b>110</b> - Normal
+ ///
+ UINT8 AutoMode; ///< AutoMode - Spi Auto Mode
+ /// @par
+ /// SPI Auto Mode
+ /// @li <b>0</b> - Disabled
+ /// @li <b>1</b> - Enabled
+ ///
+ UINT8 SpiBurstWrite; ///< SpiBurstWrite - Spi Burst Write Mode
+ /// @par
+ /// SPI Burst Write
+ /// @li <b>0</b> - Disabled
+ /// @li <b>1</b> - Enabled
+ BOOLEAN LpcClk0; ///< Lclk0En - LPCCLK0
+ /// @par
+ /// LPC Clock 0 mode
+ /// @li <b>0</b> - forced to stop
+ /// @li <b>1</b> - functioning with CLKRUN protocol
+ BOOLEAN LpcClk1; ///< Lclk1En - LPCCLK1
+ /// @par
+ /// LPC Clock 1 mode
+ /// @li <b>0</b> - forced to stop
+ /// @li <b>1</b> - functioning with CLKRUN protocol
+// UINT32 SPI100_RX_Timing_Config_Register_38; ///< SPI100_RX_Timing_Config_Register_38
+// UINT16 SPI100_RX_Timing_Config_Register_3C; ///< SPI100_RX_Timing_Config_Register_3C
+// UINT8 SpiProtectEn0_1d_34; ///
+ UINT8 SPI100_Enable; ///
+ SPI_DEVICE_PROFILE SpiDeviceProfile; /// Spi Device Profile
+} FCH_SPI;
+
+
+///
+/// IDE structure
+///
+typedef struct {
+ BOOLEAN IdeEnable; ///< IDE function switch
+ BOOLEAN IdeMsiEnable; ///< IDE MSI capability
+ UINT32 IdeSsid; ///< IDE controller Subsystem ID
+} FCH_IDE;
+
+///
+/// IR Structure
+///
+typedef struct {
+ IR_CONFIG IrConfig; ///< IrConfig
+ UINT8 IrPinControl; ///< IrPinControl
+} FCH_IR;
+
+
+///
+/// PCI Bridge Structure
+///
+typedef struct {
+ BOOLEAN PcibMsiEnable; ///< PCI-PCI Bridge MSI capability
+ UINT32 PcibSsid; ///< PCI-PCI Bridge Subsystem ID
+ UINT8 PciClks; ///< 33MHz PCICLK0/1/2/3 Enable, bits [0:3] used
+ /// @li <b>0</b> - disable
+ /// @li <b>1</b> - enable
+ ///
+ UINT16 PcibClkStopOverride; ///< PCIB_CLK_Stop Override
+ BOOLEAN PcibClockRun; ///< Enable the auto clkrun functionality
+ /// @li <b>0</b> - disable
+ /// @li <b>1</b> - enable
+ ///
+} FCH_PCIB;
+
+
+///
+/// - SATA Phy setting structure
+///
+typedef struct _SATA_PHY_SETTING {
+ UINT16 PhyCoreControlWord; /// PhyCoreControlWord - Reserved
+ UINT32 PhyFineTuneDword; /// PhyFineTuneDword - Reserved
+} SATA_PHY_SETTING;
+
+///
+/// SATA main setting structure
+///
+typedef struct _SATA_ST {
+ UINT8 SataModeReg; ///< SataModeReg - Sata Controller Mode
+ BOOLEAN SataEnable; ///< SataEnable - Sata Controller Function
+ /// @par
+ /// Sata Controller
+ /// @li <b>0</b> - disable
+ /// @li <b>1</b> - enable
+ ///
+ UINT8 Sata6AhciCap; ///< Sata6AhciCap - Reserved */
+ BOOLEAN SataSetMaxGen2; ///< SataSetMaxGen2 - Set Sata Max Gen2 mode
+ /// @par
+ /// Sata Controller Set to Max Gen2 mode
+ /// @li <b>0</b> - disable
+ /// @li <b>1</b> - enable
+ ///
+ BOOLEAN IdeEnable; ///< IdeEnable - Ide Controller Mode
+ /// @par
+ /// Sata IDE Controller set to Combined Mode
+ /// @li <b>0</b> - disable
+ /// @li <b>1</b> - enable
+ ///
+ UINT8 SataClkMode; /// SataClkMode - Reserved
+} SATA_ST;
+
+///
+/// SATA_PORT_ST - SATA PORT structure
+///
+typedef struct _SATA_PORT_ST {
+ UINT8 SataPortReg; ///< SATA Port bit map - bits[0:7] for ports 0 ~ 7
+ /// @li <b>0</b> - disable
+ /// @li <b>1</b> - enable
+ ///
+ BOOLEAN Port0; ///< PORT0 - 0:disable, 1:enable
+ BOOLEAN Port1; ///< PORT1 - 0:disable, 1:enable
+ BOOLEAN Port2; ///< PORT2 - 0:disable, 1:enable
+ BOOLEAN Port3; ///< PORT3 - 0:disable, 1:enable
+ BOOLEAN Port4; ///< PORT4 - 0:disable, 1:enable
+ BOOLEAN Port5; ///< PORT5 - 0:disable, 1:enable
+ BOOLEAN Port6; ///< PORT6 - 0:disable, 1:enable
+ BOOLEAN Port7; ///< PORT7 - 0:disable, 1:enable
+} SATA_PORT_ST;
+
+///
+///< _SATA_PORT_MD - Force Each PORT to GEN1/GEN2 mode
+///
+typedef struct _SATA_PORT_MD {
+ UINT16 SataPortMode; ///< SATA Port GEN1/GEN2 mode bit map - bits [0:15] for ports 0 ~ 7
+ UINT8 Port0; ///< PORT0 - set BIT0 to GEN1, BIT1 - PORT0 set to GEN2
+ UINT8 Port1; ///< PORT1 - set BIT2 to GEN1, BIT3 - PORT1 set to GEN2
+ UINT8 Port2; ///< PORT2 - set BIT4 to GEN1, BIT5 - PORT2 set to GEN2
+ UINT8 Port3; ///< PORT3 - set BIT6 to GEN1, BIT7 - PORT3 set to GEN2
+ UINT8 Port4; ///< PORT4 - set BIT8 to GEN1, BIT9 - PORT4 set to GEN2
+ UINT8 Port5; ///< PORT5 - set BIT10 to GEN1, BIT11 - PORT5 set to GEN2
+ UINT8 Port6; ///< PORT6 - set BIT12 to GEN1, BIT13 - PORT6 set to GEN2
+ UINT8 Port7; ///< PORT7 - set BIT14 to GEN1, BIT15 - PORT7 set to GEN2
+} SATA_PORT_MD;
+///
+/// SATA structure
+///
+typedef struct {
+ BOOLEAN SataMsiEnable; ///< SATA MSI capability
+ UINT32 SataIdeSsid; ///< SATA IDE mode SSID
+ UINT32 SataRaidSsid; ///< SATA RAID mode SSID
+ UINT32 SataRaid5Ssid; ///< SATA RAID 5 mode SSID
+ UINT32 SataAhciSsid; ///< SATA AHCI mode SSID
+
+ SATA_ST SataMode; /// SataMode - Reserved
+ SATA_CLASS SataClass; ///< SataClass - SATA Controller mode [2:0]
+ UINT8 SataIdeMode; ///< SataIdeMode - Sata IDE Controller mode
+ /// @par
+ /// @li <b>0</b> - Legacy IDE mode
+ /// @li <b>1</b> - Native IDE mode
+ ///
+ UINT8 SataDisUnusedIdePChannel; ///< SataDisUnusedIdePChannel-Disable Unused IDE Primary Channel
+ /// @par
+ /// @li <b>0</b> - Channel Enable
+ /// @li <b>1</b> - Channel Disable
+ ///
+ UINT8 SataDisUnusedIdeSChannel; ///< SataDisUnusedIdeSChannel - Disable Unused IDE Secondary Channel
+ /// @par
+ /// @li <b>0</b> - Channel Enable
+ /// @li <b>1</b> - Channel Disable
+ ///
+ UINT8 IdeDisUnusedIdePChannel; ///< IdeDisUnusedIdePChannel-Disable Unused IDE Primary Channel
+ /// @par
+ /// @li <b>0</b> - Channel Enable
+ /// @li <b>1</b> - Channel Disable
+ ///
+ UINT8 IdeDisUnusedIdeSChannel; ///< IdeDisUnusedIdeSChannel-Disable Unused IDE Secondary Channel
+ /// @par
+ /// @li <b>0</b> - Channel Enable
+ /// @li <b>1</b> - Channel Disable
+ ///
+ UINT8 SataOptionReserved; /// SataOptionReserved - Reserved
+
+ SATA_PORT_ST SataEspPort; ///< SataEspPort - SATA port is external accessible on a signal only connector (eSATA:)
+
+ SATA_PORT_ST SataPortPower; ///< SataPortPower - Port Power configuration
+
+ SATA_PORT_MD SataPortMd; ///< SataPortMd - Port Mode
+
+ UINT8 SataAggrLinkPmCap; /// SataAggrLinkPmCap - 0:OFF 1:ON
+ UINT8 SataPortMultCap; /// SataPortMultCap - 0:OFF 1:ON
+ UINT8 SataClkAutoOff; /// SataClkAutoOff - AutoClockOff 0:Disabled, 1:Enabled
+ UINT8 SataPscCap; /// SataPscCap 1:Enable PSC, 0:Disable PSC capability
+ UINT8 BiosOsHandOff; /// BiosOsHandOff - Reserved
+ UINT8 SataFisBasedSwitching; /// SataFisBasedSwitching - Reserved
+ UINT8 SataCccSupport; /// SataCccSupport - Reserved
+ UINT8 SataSscCap; /// SataSscCap - 1:Enable, 0:Disable SSC capability
+ UINT8 SataMsiCapability; /// SataMsiCapability 0:Hidden 1:Visible
+ UINT8 SataForceRaid; /// SataForceRaid 0:No function 1:Force RAID
+ UINT8 SataInternal100Spread; /// SataInternal100Spread - Reserved
+ UINT8 SataDebugDummy; /// SataDebugDummy - Reserved
+ UINT8 SataTargetSupport8Device; /// SataTargetSupport8Device - Reserved
+ UINT8 SataDisableGenericMode; /// SataDisableGenericMode - Reserved
+ BOOLEAN SataAhciEnclosureManagement; /// SataAhciEnclosureManagement - Reserved
+ UINT8 SataSgpio0; /// SataSgpio0 - Reserved
+ UINT8 SataSgpio1; /// SataSgpio1 - Reserved
+ UINT8 SataPhyPllShutDown; /// SataPhyPllShutDown - Reserved
+ BOOLEAN SataHotRemovalEnh; /// SataHotRemovalEnh - Reserved
+
+ SATA_PORT_ST SataHotRemovalEnhPort; ///< SataHotRemovalEnhPort - Hot Remove
+
+ BOOLEAN SataOobDetectionEnh; /// SataOobDetectionEnh - TRUE
+ BOOLEAN SataPowerSavingEnh; /// SataPowerSavingEnh - TRUE
+ UINT8 SataMemoryPowerSaving; /// SataMemoryPowerSaving - 0-3 Default [3]
+ BOOLEAN SataRasSupport; /// SataRasSupport - Support RAS function TRUE: Enable FALSE: Disable
+ BOOLEAN SataAhciDisPrefetchFunction; /// SataAhciDisPrefetchFunction - Disable AHCI Prefetch Function Support
+ BOOLEAN SataDevSlpPort0; /// SataDevSlpPort0 - Reserved
+ BOOLEAN SataDevSlpPort1; /// SataDevSlpPort1 - Reserved
+ UINT32 TempMmio; /// TempMmio - Reserved
+} FCH_SATA;
+
+
+//
+// IMC Message Register Software Interface
+//
+#define CPU_MISC_BUS_DEV_FUN ((0x18 << 3) + 3)
+
+#define MSG_SYS_TO_IMC 0x80
+#define Fun_80 0x80
+#define Fun_81 0x81
+#define Fun_82 0x82
+#define Fun_83 0x83
+#define Fun_84 0x84
+#define Fun_85 0x85
+#define Fun_86 0x86
+#define Fun_87 0x87
+#define Fun_88 0x88
+#define Fun_89 0x89
+#define Fun_90 0x90
+#define MSG_IMC_TO_SYS 0x81
+#define MSG_REG0 0x82
+#define MSG_REG1 0x83
+#define MSG_REG2 0x84
+#define MSG_REG3 0x85
+#define MSG_REG4 0x86
+#define MSG_REG5 0x87
+#define MSG_REG6 0x88
+#define MSG_REG7 0x89
+#define MSG_REG8 0x8A
+#define MSG_REG9 0x8B
+#define MSG_REGA 0x8C
+#define MSG_REGB 0x8D
+#define MSG_REGC 0x8E
+#define MSG_REGD 0x8F
+
+#define DISABLED 0
+#define ENABLED 1
+
+
+
+///
+/// EC structure
+///
+typedef struct _FCH_EC {
+ UINT8 MsgFun81Zone0MsgReg0; ///<Thermal zone
+ UINT8 MsgFun81Zone0MsgReg1; ///<Thermal zone
+ UINT8 MsgFun81Zone0MsgReg2; ///<Thermal zone control byte 1
+ UINT8 MsgFun81Zone0MsgReg3; ///<Thermal zone control byte 2
+ UINT8 MsgFun81Zone0MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius.
+ UINT8 MsgFun81Zone0MsgReg5; ///<Hysteresis information
+ UINT8 MsgFun81Zone0MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032
+ UINT8 MsgFun81Zone0MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located.
+ UINT8 MsgFun81Zone0MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage
+ UINT8 MsgFun81Zone0MsgReg9; ///<Fan PWM ramping rate in 5ms unit
+//
+// EC LDN9 function 81 zone 1
+//
+ UINT8 MsgFun81Zone1MsgReg0; ///<Thermal zone
+ UINT8 MsgFun81Zone1MsgReg1; ///<Thermal zone
+ UINT8 MsgFun81Zone1MsgReg2; ///<Thermal zone control byte 1
+ UINT8 MsgFun81Zone1MsgReg3; ///<Thermal zone control byte 2
+ UINT8 MsgFun81Zone1MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius.
+ UINT8 MsgFun81Zone1MsgReg5; ///<Hysteresis information
+ UINT8 MsgFun81Zone1MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032
+ UINT8 MsgFun81Zone1MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located.
+ UINT8 MsgFun81Zone1MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage
+ UINT8 MsgFun81Zone1MsgReg9; ///<Fan PWM ramping rate in 5ms unit
+//
+//EC LDN9 function 81 zone 2
+//
+ UINT8 MsgFun81Zone2MsgReg0; ///<Thermal zone
+ UINT8 MsgFun81Zone2MsgReg1; ///<Thermal zone
+ UINT8 MsgFun81Zone2MsgReg2; ///<Thermal zone control byte 1
+ UINT8 MsgFun81Zone2MsgReg3; ///<Thermal zone control byte 2
+ UINT8 MsgFun81Zone2MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius.
+ UINT8 MsgFun81Zone2MsgReg5; ///<Hysteresis information
+ UINT8 MsgFun81Zone2MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032
+ UINT8 MsgFun81Zone2MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located.
+ UINT8 MsgFun81Zone2MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage
+ UINT8 MsgFun81Zone2MsgReg9; ///<Fan PWM ramping rate in 5ms unit
+//
+//EC LDN9 function 81 zone 3
+//
+ UINT8 MsgFun81Zone3MsgReg0; ///<Thermal zone
+ UINT8 MsgFun81Zone3MsgReg1; ///<Thermal zone
+ UINT8 MsgFun81Zone3MsgReg2; ///<Thermal zone control byte 1
+ UINT8 MsgFun81Zone3MsgReg3; ///<Thermal zone control byte 2
+ UINT8 MsgFun81Zone3MsgReg4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius.
+ UINT8 MsgFun81Zone3MsgReg5; ///<Hysteresis information
+ UINT8 MsgFun81Zone3MsgReg6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032
+ UINT8 MsgFun81Zone3MsgReg7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located.
+ UINT8 MsgFun81Zone3MsgReg8; ///<Fan PWM stepping rate in unit of PWM level percentage
+ UINT8 MsgFun81Zone3MsgReg9; ///<Fan PWM ramping rate in 5ms unit
+//
+//EC LDN9 function 83 zone 0
+//
+ UINT8 MsgFun83Zone0MsgReg0; ///<Thermal zone
+ UINT8 MsgFun83Zone0MsgReg1; ///<Thermal zone
+ UINT8 MsgFun83Zone0MsgReg2; ///<_AC0
+ UINT8 MsgFun83Zone0MsgReg3; ///<_AC1
+ UINT8 MsgFun83Zone0MsgReg4; ///<_AC2
+ UINT8 MsgFun83Zone0MsgReg5; ///<_AC3
+ UINT8 MsgFun83Zone0MsgReg6; ///<_AC4
+ UINT8 MsgFun83Zone0MsgReg7; ///<_AC5
+ UINT8 MsgFun83Zone0MsgReg8; ///<_AC6
+ UINT8 MsgFun83Zone0MsgReg9; ///<_AC7
+ UINT8 MsgFun83Zone0MsgRegA; ///<_CRT
+ UINT8 MsgFun83Zone0MsgRegB; ///<_PSV
+//
+//EC LDN9 function 83 zone 1
+//
+ UINT8 MsgFun83Zone1MsgReg0; ///<Thermal zone
+ UINT8 MsgFun83Zone1MsgReg1; ///<Thermal zone
+ UINT8 MsgFun83Zone1MsgReg2; ///<_AC0
+ UINT8 MsgFun83Zone1MsgReg3; ///<_AC1
+ UINT8 MsgFun83Zone1MsgReg4; ///<_AC2
+ UINT8 MsgFun83Zone1MsgReg5; ///<_AC3
+ UINT8 MsgFun83Zone1MsgReg6; ///<_AC4
+ UINT8 MsgFun83Zone1MsgReg7; ///<_AC5
+ UINT8 MsgFun83Zone1MsgReg8; ///<_AC6
+ UINT8 MsgFun83Zone1MsgReg9; ///<_AC7
+ UINT8 MsgFun83Zone1MsgRegA; ///<_CRT
+ UINT8 MsgFun83Zone1MsgRegB; ///<_PSV
+//
+//EC LDN9 function 83 zone 2
+//
+ UINT8 MsgFun83Zone2MsgReg0; ///<Thermal zone
+ UINT8 MsgFun83Zone2MsgReg1; ///<Thermal zone
+ UINT8 MsgFun83Zone2MsgReg2; ///<_AC0
+ UINT8 MsgFun83Zone2MsgReg3; ///<_AC1
+ UINT8 MsgFun83Zone2MsgReg4; ///<_AC2
+ UINT8 MsgFun83Zone2MsgReg5; ///<_AC3
+ UINT8 MsgFun83Zone2MsgReg6; ///<_AC4
+ UINT8 MsgFun83Zone2MsgReg7; ///<_AC5
+ UINT8 MsgFun83Zone2MsgReg8; ///<_AC6
+ UINT8 MsgFun83Zone2MsgReg9; ///<_AC7
+ UINT8 MsgFun83Zone2MsgRegA; ///<_CRT
+ UINT8 MsgFun83Zone2MsgRegB; ///<_PSV
+//
+//EC LDN9 function 83 zone 3
+//
+ UINT8 MsgFun83Zone3MsgReg0; ///<Thermal zone
+ UINT8 MsgFun83Zone3MsgReg1; ///<Thermal zone
+ UINT8 MsgFun83Zone3MsgReg2; ///<_AC0
+ UINT8 MsgFun83Zone3MsgReg3; ///<_AC1
+ UINT8 MsgFun83Zone3MsgReg4; ///<_AC2
+ UINT8 MsgFun83Zone3MsgReg5; ///<_AC3
+ UINT8 MsgFun83Zone3MsgReg6; ///<_AC4
+ UINT8 MsgFun83Zone3MsgReg7; ///<_AC5
+ UINT8 MsgFun83Zone3MsgReg8; ///<_AC6
+ UINT8 MsgFun83Zone3MsgReg9; ///<_AC7
+ UINT8 MsgFun83Zone3MsgRegA; ///<_CRT
+ UINT8 MsgFun83Zone3MsgRegB; ///<_PSV
+//
+//EC LDN9 function 85 zone 0
+//
+ UINT8 MsgFun85Zone0MsgReg0; ///<Thermal zone
+ UINT8 MsgFun85Zone0MsgReg1; ///<Thermal zone
+ UINT8 MsgFun85Zone0MsgReg2; ///<AL0 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone0MsgReg3; ///<AL1 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone0MsgReg4; ///<AL2 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone0MsgReg5; ///<AL3 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone0MsgReg6; ///<AL4 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone0MsgReg7; ///<AL5 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone0MsgReg8; ///<AL6 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone0MsgReg9; ///<AL7 PWM level in percentage (0 - 100%)
+//
+//EC LDN9 function 85 zone 1
+//
+ UINT8 MsgFun85Zone1MsgReg0; ///<Thermal zone
+ UINT8 MsgFun85Zone1MsgReg1; ///<Thermal zone
+ UINT8 MsgFun85Zone1MsgReg2; ///<AL0 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone1MsgReg3; ///<AL1 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone1MsgReg4; ///<AL2 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone1MsgReg5; ///<AL3 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone1MsgReg6; ///<AL4 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone1MsgReg7; ///<AL5 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone1MsgReg8; ///<AL6 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone1MsgReg9; ///<AL7 PWM level in percentage (0 - 100%)
+//
+//EC LDN9 function 85 zone 2
+//
+ UINT8 MsgFun85Zone2MsgReg0; ///<Thermal zone
+ UINT8 MsgFun85Zone2MsgReg1; ///<Thermal zone
+ UINT8 MsgFun85Zone2MsgReg2; ///<AL0 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone2MsgReg3; ///<AL1 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone2MsgReg4; ///<AL2 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone2MsgReg5; ///<AL3 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone2MsgReg6; ///<AL4 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone2MsgReg7; ///<AL5 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone2MsgReg8; ///<AL6 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone2MsgReg9; ///<AL7 PWM level in percentage (0 - 100%)
+//
+//EC LDN9 function 85 zone 3
+//
+ UINT8 MsgFun85Zone3MsgReg0; ///<Thermal zone
+ UINT8 MsgFun85Zone3MsgReg1; ///<Thermal zone
+ UINT8 MsgFun85Zone3MsgReg2; ///<AL0 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone3MsgReg3; ///<AL1 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone3MsgReg4; ///<AL2 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone3MsgReg5; ///<AL3 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone3MsgReg6; ///<AL4 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone3MsgReg7; ///<AL5 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone3MsgReg8; ///<AL6 PWM level in percentage (0 - 100%)
+ UINT8 MsgFun85Zone3MsgReg9; ///<AL7 PWM level in percentage (0 - 100%)
+//
+//EC LDN9 function 89 TEMPIN channel 0
+//
+ UINT8 MsgFun89Zone0MsgReg0; ///<Thermal zone
+ UINT8 MsgFun89Zone0MsgReg1; ///<Thermal zone
+ UINT8 MsgFun89Zone0MsgReg2; ///<At DWORD bit 0-7
+ UINT8 MsgFun89Zone0MsgReg3; ///<At DWORD bit 15-8
+ UINT8 MsgFun89Zone0MsgReg4; ///<At DWORD bit 23-16
+ UINT8 MsgFun89Zone0MsgReg5; ///<At DWORD bit 31-24
+ UINT8 MsgFun89Zone0MsgReg6; ///<Ct DWORD bit 0-7
+ UINT8 MsgFun89Zone0MsgReg7; ///<Ct DWORD bit 15-8
+ UINT8 MsgFun89Zone0MsgReg8; ///<Ct DWORD bit 23-16
+ UINT8 MsgFun89Zone0MsgReg9; ///<Ct DWORD bit 31-24
+ UINT8 MsgFun89Zone0MsgRegA; ///<Mode bit 0-7
+//
+//EC LDN9 function 89 TEMPIN channel 1
+//
+ UINT8 MsgFun89Zone1MsgReg0; ///<Thermal zone
+ UINT8 MsgFun89Zone1MsgReg1; ///<Thermal zone
+ UINT8 MsgFun89Zone1MsgReg2; ///<At DWORD bit 0-7
+ UINT8 MsgFun89Zone1MsgReg3; ///<At DWORD bit 15-8
+ UINT8 MsgFun89Zone1MsgReg4; ///<At DWORD bit 23-16
+ UINT8 MsgFun89Zone1MsgReg5; ///<At DWORD bit 31-24
+ UINT8 MsgFun89Zone1MsgReg6; ///<Ct DWORD bit 0-7
+ UINT8 MsgFun89Zone1MsgReg7; ///<Ct DWORD bit 15-8
+ UINT8 MsgFun89Zone1MsgReg8; ///<Ct DWORD bit 23-16
+ UINT8 MsgFun89Zone1MsgReg9; ///<Ct DWORD bit 31-24
+ UINT8 MsgFun89Zone1MsgRegA; ///<Mode bit 0-7
+//
+//EC LDN9 function 89 TEMPIN channel 2
+//
+ UINT8 MsgFun89Zone2MsgReg0; ///<Thermal zone
+ UINT8 MsgFun89Zone2MsgReg1; ///<Thermal zone
+ UINT8 MsgFun89Zone2MsgReg2; ///<At DWORD bit 0-7
+ UINT8 MsgFun89Zone2MsgReg3; ///<At DWORD bit 15-8
+ UINT8 MsgFun89Zone2MsgReg4; ///<At DWORD bit 23-16
+ UINT8 MsgFun89Zone2MsgReg5; ///<At DWORD bit 31-24
+ UINT8 MsgFun89Zone2MsgReg6; ///<Ct DWORD bit 0-7
+ UINT8 MsgFun89Zone2MsgReg7; ///<Ct DWORD bit 15-8
+ UINT8 MsgFun89Zone2MsgReg8; ///<Ct DWORD bit 23-16
+ UINT8 MsgFun89Zone2MsgReg9; ///<Ct DWORD bit 31-24
+ UINT8 MsgFun89Zone2MsgRegA; ///<Mode bit 0-7
+//
+//EC LDN9 function 89 TEMPIN channel 3
+//
+ UINT8 MsgFun89Zone3MsgReg0; ///<Thermal zone
+ UINT8 MsgFun89Zone3MsgReg1; ///<Thermal zone
+ UINT8 MsgFun89Zone3MsgReg2; ///<At DWORD bit 0-7
+ UINT8 MsgFun89Zone3MsgReg3; ///<At DWORD bit 15-8
+ UINT8 MsgFun89Zone3MsgReg4; ///<At DWORD bit 23-16
+ UINT8 MsgFun89Zone3MsgReg5; ///<At DWORD bit 31-24
+ UINT8 MsgFun89Zone3MsgReg6; ///<Ct DWORD bit 0-7
+ UINT8 MsgFun89Zone3MsgReg7; ///<Ct DWORD bit 15-8
+ UINT8 MsgFun89Zone3MsgReg8; ///<Ct DWORD bit 23-16
+ UINT8 MsgFun89Zone3MsgReg9; ///<Ct DWORD bit 31-24
+ UINT8 MsgFun89Zone3MsgRegA; ///<Mode bit 0-7
+//
+// FLAG for Fun83/85/89 support
+//
+ UINT16 IMCFUNSupportBitMap; ///< Bit0=81FunZone0 support(1=On;0=Off); bit1-3=81FunZone1-Zone3;Bit4-7=83FunZone0-Zone3;Bit8-11=85FunZone0-Zone3;Bit11-15=89FunZone0-Zone3;
+} FCH_EC;
+
+///
+/// IMC structure
+///
+typedef struct _FCH_IMC {
+ UINT8 ImcEnable; ///< ImcEnable - IMC Enable
+ UINT8 ImcEnabled; ///< ImcEnabled - IMC Enable
+ UINT8 ImcSureBootTimer; ///< ImcSureBootTimer - IMc SureBootTimer function
+ FCH_EC EcStruct; ///< EC structure
+ UINT8 ImcEnableOverWrite; ///< OverWrite IMC with the EC structure
+ /// @li <b>00</b> - by default strapping
+ /// @li <b>01</b> - enable
+ /// @li <b>10</b> - disable
+ ///
+} FCH_IMC;
+
+
+///
+/// Hpet structure
+///
+typedef struct {
+ BOOLEAN HpetEnable; ///< HPET function switch
+
+ BOOLEAN HpetMsiDis; ///< HpetMsiDis - South Bridge HPET MSI Configuration
+ /// @par
+ /// @li <b>1</b> - disable
+ /// @li <b>0</b> - enable
+
+ UINT32 HpetBase; ///< HpetBase
+ /// @par
+ /// HPET Base address
+} FCH_HPET;
+
+
+///
+/// GCPU related parameters
+///
+typedef struct {
+ UINT8 AcDcMsg; ///< Send a message to CPU to indicate the power mode (AC vs battery)
+ /// @li <b>1</b> - disable
+ /// @li <b>0</b> - enable
+
+ UINT8 TimerTickTrack; ///< Send a message to CPU to indicate the latest periodic timer interval
+ /// @li <b>1</b> - disable
+ /// @li <b>0</b> - enable
+
+ UINT8 ClockInterruptTag; ///< Mark the periodic timer interrupt
+ /// @li <b>1</b> - disable
+ /// @li <b>0</b> - enable
+
+ UINT8 OhciTrafficHanding; ///< Cause CPU to break out from C state when USB OHCI has pending traffic
+ /// @li <b>1</b> - disable
+ /// @li <b>0</b> - enable
+
+ UINT8 EhciTrafficHanding; ///< Cause CPU to break out from C state when USB EHCI has pending traffic
+ /// @li <b>1</b> - disable
+ /// @li <b>0</b> - enable
+
+ UINT8 GcpuMsgCMultiCore; ///< Track of CPU C state by monitoring each core's C state message
+ /// @li <b>1</b> - disable
+ /// @li <b>0</b> - enable
+
+ UINT8 GcpuMsgCStage; ///< Enable the FCH C state coordination logic
+ /// @li <b>1</b> - disable
+ /// @li <b>0</b> - enable
+} FCH_GCPU;
+
+
+///
+/// Timer
+///
+typedef struct {
+ BOOLEAN Enable; ///< Whether to register timer SMI in POST
+ BOOLEAN StartNow; ///< Whether to start the SMI immediately during registration
+ UINT16 CycleDuration; ///< [14:0] - Actual cycle duration = CycleDuration + 1
+} TIMER_SMI;
+
+
+///
+/// MISC structure
+///
+typedef struct {
+ BOOLEAN NativePcieSupport; /// PCIe NativePcieSupport - Debug function. 1:Enabled, 0:Disabled
+ BOOLEAN S3Resume; /// S3Resume - Flag of ACPI S3 Resume.
+ BOOLEAN RebootRequired; /// RebootRequired - Flag of Reboot system is required.
+ UINT8 FchVariant; /// FchVariant - FCH Variant value.
+ UINT8 Cg2Pll; ///< CG2 PLL - 0:disable, 1:enable
+ TIMER_SMI LongTimer; ///< Long Timer SMI
+ TIMER_SMI ShortTimer; ///< Short Timer SMI
+ UINT32 FchCpuId; ///< Saving CpuId for FCH Module.
+} FCH_MISC;
+
+
+///
+/// SMBus structure
+///
+typedef struct {
+ UINT32 SmbusSsid; ///< SMBUS controller Subsystem ID
+} FCH_SMBUS;
+
+
+///
+/// Acpi structure
+///
+typedef struct {
+ UINT16 Smbus0BaseAddress; ///< Smbus0BaseAddress
+ /// @par
+ /// Smbus BASE Address
+ ///
+ UINT16 Smbus1BaseAddress; ///< Smbus1BaseAddress
+ /// @par
+ /// Smbus1 (ASF) BASE Address
+ ///
+ UINT16 SioPmeBaseAddress; ///< SioPmeBaseAddress
+ /// @par
+ /// SIO PME BASE Address
+ ///
+ UINT32 WatchDogTimerBase; ///< WatchDogTimerBase
+ /// @par
+ /// Watch Dog Timer Address
+ ///
+ UINT16 AcpiPm1EvtBlkAddr; ///< AcpiPm1EvtBlkAddr
+ /// @par
+ /// ACPI PM1 event block Address
+ ///
+ UINT16 AcpiPm1CntBlkAddr; ///< AcpiPm1CntBlkAddr
+ /// @par
+ /// ACPI PM1 Control block Address
+ ///
+ UINT16 AcpiPmTmrBlkAddr; ///< AcpiPmTmrBlkAddr
+ /// @par
+ /// ACPI PM timer block Address
+ ///
+ UINT16 CpuControlBlkAddr; ///< CpuControlBlkAddr
+ /// @par
+ /// ACPI CPU control block Address
+ ///
+ UINT16 AcpiGpe0BlkAddr; ///< AcpiGpe0BlkAddr
+ /// @par
+ /// ACPI GPE0 block Address
+ ///
+ UINT16 SmiCmdPortAddr; ///< SmiCmdPortAddr
+ /// @par
+ /// SMI command port Address
+ ///
+ UINT16 AcpiPmaCntBlkAddr; ///< AcpiPmaCntBlkAddr
+ /// @par
+ /// ACPI PMA Control block Address
+ ///
+ BOOLEAN AnyHt200MhzLink; ///< AnyHt200MhzLink
+ /// @par
+ /// HT Link Speed on 200MHz option for each CPU specific LDTSTP# (Force enable)
+ ///
+ BOOLEAN SpreadSpectrum; ///< SpreadSpectrum
+ /// @par
+ /// Spread Spectrum function
+ /// @li <b>0</b> - disable
+ /// @li <b>1</b> - enable
+ ///
+ POWER_FAIL PwrFailShadow; ///< PwrFailShadow = PM_Reg: 5Bh [3:0]
+ /// @par
+ /// @li <b>00</b> - Always off
+ /// @li <b>01</b> - Always on
+ /// @li <b>11</b> - Use previous
+ ///
+ UINT8 StressResetMode; ///< StressResetMode 01-10
+ /// @li <b>00</b> - Disabed
+ /// @li <b>01</b> - Io Write 0x64 with 0xfe
+ /// @li <b>10</b> - Io Write 0xcf9 with 0x06
+ /// @li <b>11</b> - Io Write 0xcf9 with 0x0e
+ ///
+ BOOLEAN MtC1eEnable; /// MtC1eEnable - Enable MtC1e
+ VOID* OemProgrammingTablePtr; /// Pointer of ACPI OEM table
+ UINT8 SpreadSpectrumOptions; /// SpreadSpectrumOptions - Spread Spectrum Option
+} FCH_ACPI;
+
+
+///
+/// HWM temp parameter structure
+///
+typedef struct _FCH_HWM_TEMP_PAR {
+ UINT16 At; ///< At
+ UINT16 Ct; ///< Ct
+ UINT8 Mode; ///< Mode BIT0:HiRatio BIT1:HiCurrent
+} FCH_HWM_TEMP_PAR;
+
+///
+/// HWM Current structure
+///
+typedef struct _FCH_HWM_CUR {
+ UINT16 FanSpeed[5]; ///< FanSpeed - fan Speed
+ UINT16 Temperature[5]; ///< Temperature - temperature
+ UINT16 Voltage[8]; ///< Voltage - voltage
+} FCH_HWM_CUR;
+
+///
+/// HWM fan control structure
+///
+typedef struct _FCH_HWM_FAN_CTR {
+ UINT8 InputControlReg00; /// Fan Input Control register, PM2 offset [0:4]0
+ UINT8 ControlReg01; /// Fan control register, PM2 offset [0:4]1
+ UINT8 FreqReg02; /// Fan frequency register, PM2 offset [0:4]2
+ UINT8 LowDutyReg03; /// Low Duty register, PM2 offset [0:4]3
+ UINT8 MedDutyReg04; /// Med Duty register, PM2 offset [0:4]4
+ UINT8 MultiplierReg05; /// Multiplier register, PM2 offset [0:4]5
+ UINT16 LowTempReg06; /// Low Temp register, PM2 offset [0:4]6
+ UINT16 MedTempReg08; /// Med Temp register, PM2 offset [0:4]8
+ UINT16 HighTempReg0A; /// High Temp register, PM2 offset [0:4]A
+ UINT8 LinearRangeReg0C; /// Linear Range register, PM2 offset [0:4]C
+ UINT8 LinearHoldCountReg0D; /// Linear Hold Count register, PM2 offset [0:4]D
+} FCH_HWM_FAN_CTR;
+
+///
+/// Hwm structure
+///
+typedef struct _FCH_HWM {
+ UINT8 HwMonitorEnable; ///< HwMonitorEnable
+ UINT32 HwmControl; ///< hwmControl
+ /// @par
+ /// HWM control configuration
+ /// @li <b>0</b> - HWM is Enabled
+ /// @li <b>1</b> - IMC is Enabled
+ ///
+ UINT8 FanSampleFreqDiv; ///< Sampling rate of Fan Speed
+ /// @li <b>00</b> - Base(22.5KHz)
+ /// @li <b>01</b> - Base(22.5KHz)/2
+ /// @li <b>10</b> - Base(22.5KHz)/4
+ /// @li <b>11</b> - Base(22.5KHz)/8
+ ///
+ UINT8 HwmFchtsiAutoPoll; ///< TSI Auto Polling
+ /// @li <b>0</b> - disable
+ /// @li <b>1</b> - enable
+ ///
+ UINT8 HwmFchtsiAutoPollStarted; ///< HwmSbtsiAutoPollStarted
+ UINT8 FanLinearEnhanceEn; ///< FanLinearEnhanceEn
+ UINT8 FanLinearHoldFix; ///< FanLinearHoldFix
+ UINT8 FanLinearRangeOutLimit; ///< FanLinearRangeOutLimit
+ UINT16 HwmCalibrationFactor; /// Calibration Factor
+ FCH_HWM_CUR HwmCurrent; /// HWM Current structure
+ FCH_HWM_CUR HwmCurrentRaw; /// HWM Current Raw structure
+ FCH_HWM_TEMP_PAR HwmTempPar[5]; /// HWM Temp parameter structure
+ FCH_HWM_FAN_CTR HwmFanControl[5]; /// HWM Fan Control structure
+ FCH_HWM_FAN_CTR HwmFanControlCooked[5]; /// HWM Fan Control structure
+} FCH_HWM;
+
+
+///
+/// Gec structure
+///
+typedef struct {
+ BOOLEAN Enable; ///< GecEnable - GEC function switch
+} FCH_F1;
+
+
+///
+/// _ABTblEntry - AB link register table R/W structure
+///
+typedef struct _AB_TBL_ENTRY {
+ UINT8 RegType; /// RegType : AB Register Type (ABCFG, AXCFG and so on)
+ UINT32 RegIndex; /// RegIndex : AB Register Index
+ UINT32 RegMask; /// RegMask : AB Register Mask
+ UINT32 RegData; /// RegData : AB Register Data
+} AB_TBL_ENTRY;
+
+///
+/// AB structure
+///
+typedef struct {
+ BOOLEAN AbMsiEnable; ///< ABlink MSI capability
+ UINT8 ALinkClkGateOff; /// Alink Clock Gate-Off function - 0:disable, 1:enable *KR
+ UINT8 BLinkClkGateOff; /// Blink Clock Gate-Off function - 0:disable, 1:enable *KR
+ UINT8 AbClockGating; /// AB Clock Gating - 0:disable, 1:enable *KR
+ UINT8 GppClockGating; /// GPP Clock Gating - 0:disable, 1:enable
+ UINT8 UmiL1TimerOverride; /// UMI L1 inactivity timer overwrite value
+ UINT8 UmiLinkWidth; /// UMI Link Width
+ UINT8 UmiDynamicSpeedChange; /// UMI Dynamic Speed Change - 0:disable, 1:enable
+ UINT8 PcieRefClockOverClocking; /// PCIe Ref Clock OverClocking value
+ UINT8 UmiGppTxDriverStrength; /// UMI GPP TX Driver Strength
+ BOOLEAN NbSbGen2; /// UMI link Gen2 - 0:Gen1, 1:Gen2
+ UINT8 PcieOrderRule; /// PCIe Order Rule - 0:disable, 1:enable *KR AB Posted Pass Non-Posted
+ UINT8 SlowSpeedAbLinkClock; /// Slow Speed AB Link Clock - 0:disable, 1:enable *KR
+ BOOLEAN ResetCpuOnSyncFlood; /// Reset Cpu On Sync Flood - 0:disable, 1:enable *KR
+ BOOLEAN AbDmaMemoryWrtie3264B; /// AB DMA Memory Write 32/64 BYTE Support *KR only
+ BOOLEAN AbMemoryPowerSaving; /// AB Memory Power Saving *KR only
+ BOOLEAN SbgDmaMemoryWrtie3264ByteCount; /// SBG DMA Memory Write 32/64 BYTE Count Support *KR only
+ BOOLEAN SbgMemoryPowerSaving; /// SBG Memory Power Saving *KR only
+} FCH_AB;
+
+
+/**
+ * PCIE_CAP_ID - PCIe Cap ID
+ *
+ */
+#define PCIE_CAP_ID 0x10
+
+///
+/// FCH_GPP_PORT_CONFIG - Fch GPP port config structure
+///
+typedef struct {
+ BOOLEAN PortPresent; ///< Port connection
+ /// @par
+ /// @li <b>0</b> - Port doesn't have slot. No need to train the link
+ /// @li <b>1</b> - Port connection defined and needs to be trained
+ ///
+ BOOLEAN PortDetected; ///< Link training status
+ /// @par
+ /// @li <b>0</b> - EP not detected
+ /// @li <b>1</b> - EP detected
+ ///
+ BOOLEAN PortIsGen2; ///< Port link speed configuration
+ /// @par
+ /// @li <b>00</b> - Auto
+ /// @li <b>01</b> - Forced GEN1
+ /// @li <b>10</b> - Forced GEN2
+ /// @li <b>11</b> - Reserved
+ ///
+ BOOLEAN PortHotPlug; ///< Support hot plug?
+ /// @par
+ /// @li <b>0</b> - No support
+ /// @li <b>1</b> - support
+ ///
+ UINT8 PortMisc; /// PortMisc - Reserved
+} FCH_GPP_PORT_CONFIG;
+
+///
+/// GPP structure
+///
+typedef struct {
+ FCH_GPP_PORT_CONFIG PortCfg[4]; /// GPP port configuration structure
+ GPP_LINKMODE GppLinkConfig; ///< GppLinkConfig - PCIE_GPP_Enable[3:0]
+ /// @li <b>0000</b> - Port ABCD -> 4:0:0:0
+ /// @li <b>0010</b> - Port ABCD -> 2:2:0:0
+ /// @li <b>0011</b> - Port ABCD -> 2:1:1:0
+ /// @li <b>0100</b> - Port ABCD -> 1:1:1:1
+ ///
+ BOOLEAN GppFunctionEnable; ///< GPP Function - 0:disable, 1:enable
+ BOOLEAN GppToggleReset; ///< Toggle GPP core reset
+ UINT8 GppHotPlugGeventNum; ///< Hotplug GEVENT # - valid value 0-31
+ UINT8 GppFoundGfxDev; ///< Gpp Found Gfx Device
+ /// @li <b>0</b> - Not found
+ /// @li <b>1</b> - Found
+ ///
+ BOOLEAN GppGen2; ///< GPP Gen2 - 0:disable, 1:enable
+ UINT8 GppGen2Strap; ///< GPP Gen2 Strap - 0:disable, 1:enable, FCH itself uses this
+ BOOLEAN GppMemWrImprove; ///< GPP Memory Write Improve - 0:disable, 1:enable
+ BOOLEAN GppUnhidePorts; ///< GPP Unhide Ports - 0:disable, 1:enable
+ UINT8 GppPortAspm; ///< GppPortAspm - ASPM state for all GPP ports
+ /// @li <b>01</b> - Disabled
+ /// @li <b>01</b> - L0s
+ /// @li <b>10</b> - L1
+ /// @li <b>11</b> - L0s + L1
+ ///
+ BOOLEAN GppLaneReversal; ///< GPP Lane Reversal - 0:disable, 1:enable
+ BOOLEAN GppPhyPllPowerDown; ///< GPP PHY PLL Power Down - 0:disable, 1:enable
+ BOOLEAN GppDynamicPowerSaving; ///< GPP Dynamic Power Saving - 0:disable, 1:enable
+ BOOLEAN PcieAer; ///< PcieAer - Advanced Error Report: 0/1-disable/enable
+ BOOLEAN PcieRas; ///< PCIe RAS - 0:disable, 1:enable
+ BOOLEAN PcieCompliance; ///< PCIe Compliance - 0:disable, 1:enable
+ BOOLEAN PcieSoftwareDownGrade; ///< PCIe Software Down Grade
+ BOOLEAN UmiPhyPllPowerDown; ///< UMI PHY PLL Power Down - 0:disable, 1:enable
+ BOOLEAN SerialDebugBusEnable; ///< Serial Debug Bus Enable
+ UINT8 GppHardwareDownGrade; ///< GppHardwareDownGrade - Gpp HW Down Grade function 0:Disable, 1-4: portA-D
+ UINT8 GppL1ImmediateAck; ///< GppL1ImmediateAck - Gpp L1 Immediate ACK 0: enable, 1: disable
+ BOOLEAN NewGppAlgorithm; ///< NewGppAlgorithm - New GPP procedure
+ UINT8 HotPlugPortsStatus; ///< HotPlugPortsStatus - Save Hot-Plug Ports Status
+ UINT8 FailPortsStatus; ///< FailPortsStatus - Save Failure Ports Status
+ UINT8 GppPortMinPollingTime; ///< GppPortMinPollingTime - Min. Polling time for Gpp Port Training
+ BOOLEAN IsCapsuleMode; ///< IsCapsuleMode - Support Capsule Mode in FCH
+} FCH_GPP;
+
+
+///
+/// FCH USB sturcture
+///
+typedef struct {
+ BOOLEAN Ohci1Enable; ///< OHCI1 controller enable
+ BOOLEAN Ohci2Enable; ///< OHCI2 controller enable
+ BOOLEAN Ohci3Enable; ///< OHCI3 controller enable
+ BOOLEAN Ohci4Enable; ///< OHCI4 controller enable
+ BOOLEAN Ehci1Enable; ///< EHCI1 controller enable
+ BOOLEAN Ehci2Enable; ///< EHCI2 controller enable
+ BOOLEAN Ehci3Enable; ///< EHCI3 controller enable
+ BOOLEAN Xhci0Enable; ///< XHCI0 controller enable
+ BOOLEAN Xhci1Enable; ///< XHCI1 controller enable
+ BOOLEAN UsbMsiEnable; ///< USB MSI capability
+ UINT32 OhciSsid; ///< OHCI SSID
+ UINT32 Ohci4Ssid; ///< OHCI 4 SSID
+ UINT32 EhciSsid; ///< EHCI SSID
+ UINT32 XhciSsid; ///< XHCI SSID
+ BOOLEAN UsbPhyPowerDown; ///< USB PHY Power Down - 0:disable, 1:enable
+ UINT32 UserDefineXhciRomAddr; ///< XHCI ROM address define by platform BIOS
+ UINT8 Ehci1Phy[5]; ///< EHCI1 USB PHY Driving Strength value table
+ UINT8 Ehci2Phy[5]; ///< EHCI2 USB PHY Driving Strength value table
+ UINT8 Ehci3Phy[4]; ///< EHCI3 USB PHY Driving Strength value table
+ UINT8 Xhci20Phy[4]; ///< XHCI USB 2.0 PHY Driving Strength value table
+} FCH_USB;
+
+
+/// Private: FCH_DATA_BLOCK_RESET
+typedef struct _FCH_RESET_DATA_BLOCK {
+ AMD_CONFIG_PARAMS *StdHeader; ///< Header structure
+ FCH_RESET_INTERFACE FchReset; ///< Reset interface
+
+ UINT8 FastSpeed; ///< SPI FastSpeed: 1-66MHz, 2-33MHz, 3-22MHz, 4-16.5MHz, 5-100Mhz
+ UINT8 WriteSpeed; ///< SPI Write Speed: 1-66MHz, 2-33MHz, 3-22MHz, 4-16.5MHz, 5-100Mhz
+ UINT8 Mode; ///< SPI Mode
+ /// @li <b>101</b> - Qual-io 1-4-4
+ /// @li <b>100</b> - Dual-io 1-2-2
+ /// @li <b>011</b> - Qual-io 1-1-4
+ /// @li <b>010</b> - Dual-io 1-1-2
+ /// @li <b>111</b> - FastRead
+ /// @li <b>110</b> - Normal
+ ///
+ UINT8 AutoMode; ///< SPI Auto Mode - 0:disable, 1:enable
+ UINT8 BurstWrite; ///< SPI Burst Write - 0:disable, 1:enable
+ BOOLEAN Sata6AhciCap; ///< SATA 6 AHCI Capability - TRUE:enable, FALSE:disable
+ UINT8 Cg2Pll; ///< CG2 PLL - 0:disable, 1:enable
+ BOOLEAN EcKbd; ///< EC KBD - 0:disable, 1:enable
+ BOOLEAN LegacyFree; ///< Legacy Free - 0:disable, 1:enable
+ BOOLEAN SataSetMaxGen2; ///< SATA enable maximum GEN2
+ UINT8 SataClkMode; ///< SATA reference clock selector and divider
+ UINT8 SataModeReg; ///< Output: SATAConfig PMIO:0xDA
+ BOOLEAN SataInternal100Spread; ///< SATA internal 100MHz spread ON/OFF
+ UINT8 SpiSpeed; ///< SPI NormSpeed: 1-66MHz, 2-33MHz, 3-22MHz, 4-16.5MHz, 5-100Mhz
+// UINT32 SPI100_RX_Timing_Config_Register_38; ///< SPI100_RX_Timing_Config_Register_38
+// UINT16 SPI100_RX_Timing_Config_Register_3C; ///< SPI100_RX_Timing_Config_Register_3C
+// UINT8 SpiProtectEn0_1d_34; ///
+ UINT8 SPI100_Enable; ///
+ BOOLEAN EcChannel0; ///< Enable EC channel 0
+ FCH_GPP Gpp; ///< GPP subsystem
+ FCH_SPI Spi; ///< SPI subsystem
+ BOOLEAN QeEnabled; /// Quad Mode Enabled
+// VOID* OemSpiDeviceTable; /// Pointer of OEM Spi Device table
+ VOID* OemResetProgrammingTablePtr; /// Pointer of ACPI OEM table
+} FCH_RESET_DATA_BLOCK;
+
+
+/// Private: FCH_DATA_BLOCK
+typedef struct _FCH_DATA_BLOCK {
+ AMD_CONFIG_PARAMS *StdHeader; ///< Header structure
+
+ FCH_ACPI HwAcpi; ///< ACPI structure
+ FCH_AB Ab; ///< AB structure
+ FCH_GPP Gpp; ///< GPP structure
+ FCH_USB Usb; ///< USB structure
+ FCH_SATA Sata; ///< SATA structure
+ FCH_SMBUS Smbus; ///< SMBus structure
+ FCH_IDE Ide; ///< IDE structure
+ FCH_AZALIA Azalia;
+ FCH_SPI Spi; ///< SPI structure
+ FCH_PCIB Pcib; ///< PCIB structure
+ FCH_F1 F1; ///< GEC structure
+ FCH_SD Sd; ///< SD structure
+ FCH_HWM Hwm; ///< Hardware Moniter structure
+ FCH_IR Ir; ///< IR structure
+ FCH_HPET Hpet; ///< HPET structure
+ FCH_GCPU Gcpu; ///< GCPU structure
+ FCH_IMC Imc; ///< IMC structure
+ FCH_MISC Misc; ///< MISC structure
+} FCH_DATA_BLOCK;
+
+#pragma pack (pop)
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchDef.h b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchDef.h
new file mode 100644
index 0000000..1d717e4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchDef.h
@@ -0,0 +1,438 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH routine definition
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#ifndef _FCH_DEF_H_
+#define _FCH_DEF_H_
+
+
+UINT32 ReadAlink (IN UINT32 Index, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID WriteAlink (IN UINT32 Index, IN UINT32 Data, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID RwAlink (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID ReadMem (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *ValuePtr);
+VOID WriteMem (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *ValuePtr);
+VOID RwMem (IN UINT32 Address, IN UINT8 OpFlag, IN UINT32 Mask, IN UINT32 Data);
+VOID ReadPci (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID WritePci (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID RwPci (IN UINT32 Address, IN UINT8 OpFlag, IN UINT32 Mask, IN UINT32 Data, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID ProgramPciByteTable (IN REG8_MASK* pPciByteTable, IN UINT16 dwTableSize, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID ProgramFchAcpiMmioTbl (IN ACPI_REG_WRITE *pAcpiTbl, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID ProgramFchSciMapTbl (IN SCI_MAP_CONTROL *pSciMapTbl, IN FCH_RESET_DATA_BLOCK *FchResetDataBlock);
+VOID ProgramFchGpioTbl (IN GPIO_CONTROL *pGpioTbl, IN FCH_RESET_DATA_BLOCK *FchResetDataBlock);
+VOID ProgramFchSataPhyTbl (IN SATA_PHY_CONTROL *pSataPhyTbl, IN FCH_RESET_DATA_BLOCK *FchResetDataBlock);
+VOID GetChipSysMode (IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader);
+BOOLEAN IsImcEnabled (IN AMD_CONFIG_PARAMS *StdHeader);
+VOID ReadPmio (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID WritePmio (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID RwPmio (IN UINT8 Address, IN UINT8 OpFlag, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID ReadPmio2 (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID WritePmio2 (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID RwPmio2 (IN UINT8 Address, IN UINT8 OpFlag, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID ReadBiosram (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID WriteBiosram (IN UINT8 Address, IN UINT8 OpFlag, IN VOID *Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID GetFchAcpiMmioBase (OUT UINT32 *AcpiMmioBase, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID GetFchAcpiPmBase (OUT UINT16 *AcpiPmBase, IN AMD_CONFIG_PARAMS *StdHeader);
+UINT8 ReadFchSleepType (IN AMD_CONFIG_PARAMS *StdHeader);
+
+///
+/// Fch Ab Routines
+///
+/// Pei Phase
+///
+VOID FchInitResetAb (IN VOID* FchDataPtr);
+VOID FchProgramAbPowerOnReset (IN VOID* FchDataPtr);
+///
+/// Dxe Phase
+///
+VOID FchInitEnvAb (IN VOID* FchDataPtr);
+VOID FchInitEnvAbSpecial (IN VOID* FchDataPtr);
+VOID FchInitMidAb (IN VOID* FchDataPtr);
+VOID FchInitLateAb (IN VOID* FchDataPtr);
+///
+/// Other Public Routines
+///
+VOID FchInitEnvAbLinkInit (IN VOID* FchDataPtr);
+BOOLEAN IsUmiOneLaneGen1Mode (IN AMD_CONFIG_PARAMS *StdHeader);
+VOID FchAbLateProgram (IN VOID* FchDataPtr);
+
+///
+/// Fch Pcie Routines
+///
+/// Pei Phase
+///
+VOID FchInitResetPcie (IN VOID* FchDataPtr);
+///
+/// Dxe Phase
+///
+VOID FchInitEnvPcie (IN VOID* FchDataPtr);
+VOID FchInitMidPcie (IN VOID* FchDataPtr);
+VOID FchInitLatePcie (IN VOID* FchDataPtr);
+VOID ProgramPcieNativeMode (IN VOID* FchDataPtr);
+
+///
+/// Fch Gpp Routines
+///
+/// Pei Phase
+///
+VOID FchInitResetGpp (IN VOID* FchDataPtr);
+VOID ProgramFchGppInitReset (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID FchResetPcie (IN RESET_BLOCK ResetBlock, IN RESET_OP ResetOp, IN AMD_CONFIG_PARAMS *StdHeader);
+
+///
+/// Dxe Phase
+///
+VOID FchInitEnvGpp (IN VOID* FchDataPtr);
+VOID FchInitMidGpp (IN VOID* FchDataPtr);
+VOID FchInitLateGpp (IN VOID* FchDataPtr);
+
+///
+/// Common Gpp Routines
+///
+VOID ProgramGppTogglePcieReset (IN BOOLEAN DoToggling, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID FchGppForceGen1 (IN FCH_GPP *FchGpp, IN CONST UINT8 ActivePorts, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID FchGppForceGen2 (IN FCH_GPP *FchGpp, IN CONST UINT8 ActivePorts, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID FchGppDynamicPowerSaving (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader);
+UINT8 GppPortPollingLtssm (IN FCH_GPP *FchGpp, IN UINT8 ActivePorts, IN BOOLEAN IsGen2, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID GppGen2Workaround (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader);
+UINT8 FchFindPciCap (IN UINT32 PciAddress, IN UINT8 TargetCapId, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID FchGppPortInit (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID FchGppPortInitPhaseII (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID FchGppPortInitS3Phase (IN FCH_GPP *FchGpp, IN AMD_CONFIG_PARAMS *StdHeader);
+UINT32 GppGetFchTempBus (IN AMD_CONFIG_PARAMS *StdHeader);
+
+///
+/// Fch Azalia Routines
+///
+/// Pei Phase
+///
+VOID FchInitResetF1 (IN VOID *FchDataPtr);
+///
+/// Dxe Phase
+///
+VOID FchInitEnvAzalia (IN VOID *FchDataPtr);
+VOID FchInitMidAzalia (IN VOID *FchDataPtr);
+VOID FchInitLateAzalia (IN VOID *FchDataPtr);
+
+
+/// Other Public Routines
+///
+VOID FchInitGecController (IN VOID* FchDataPtr);
+VOID FchSwInitGecBootRom (IN VOID* FchDataPtr);
+
+///
+/// Fch HwAcpi Routines
+///
+/// Pei Phase
+///
+VOID FchInitResetHwAcpiP (IN VOID *FchDataPtr);
+VOID FchInitResetHwAcpi (IN VOID *FchDataPtr);
+VOID ProgramFchHwAcpiResetP (IN VOID *FchDataPtr);
+///
+/// Dxe Phase
+///
+VOID FchInitEnvHwAcpiP (IN VOID *FchDataPtr);
+VOID FchInitEnvHwAcpi (IN VOID *FchDataPtr);
+VOID ProgramEnvPFchAcpiMmio (IN VOID *FchDataPtr);
+VOID ProgramFchEnvHwAcpiPciReg (IN VOID *FchDataPtr);
+VOID ProgramSpecificFchInitEnvAcpiMmio (IN VOID *FchDataPtr);
+VOID ProgramFchEnvSpreadSpectrum (IN VOID *FchDataPtr);
+VOID FchInitMidHwAcpi (IN VOID *FchDataPtr);
+VOID FchInitLateHwAcpi (IN VOID *FchDataPtr);
+
+///
+/// Other Public Routines
+///
+VOID HpetInit (IN VOID *FchDataPtr);
+VOID C3PopupSetting (IN VOID *FchDataPtr);
+VOID MtC1eEnable (IN VOID *FchDataPtr);
+VOID GcpuRelatedSetting (IN VOID *FchDataPtr);
+VOID StressResetModeLate (IN VOID *FchDataPtr);
+
+///
+/// Fch Hwm Routines
+///
+/// Pei Phase
+///
+///
+/// Dxe Phase
+///
+///
+/// Other Public Routines
+///
+VOID HwmInitRegister (IN VOID* FchDataPtr);
+VOID FchECfancontrolservice (IN VOID* FchDataPtr);
+
+
+///
+/// Fch Ide Routines
+///
+VOID FchInitEnvIde (IN VOID* FchDataPtr);
+VOID FchInitMidIde (IN VOID* FchDataPtr);
+VOID FchInitLateIde (IN VOID* FchDataPtr);
+
+
+///
+/// Fch Imc Routines
+///
+/// Pei Phase
+///
+VOID FchInitResetImc (IN VOID *FchDataPtr);
+///
+/// Dxe Phase
+///
+VOID FchInitEnvImc (IN VOID *FchDataPtr);
+VOID FchInitMidImc (IN VOID *FchDataPtr);
+VOID FchInitLateImc (IN VOID *FchDataPtr);
+VOID FchInitEnvEc (IN VOID *FchDataPtr);
+VOID FchInitMidEc (IN VOID *FchDataPtr);
+VOID FchInitLateEc (IN VOID *FchDataPtr);
+///
+/// Other Public Routines
+///
+VOID EnterEcConfig (IN AMD_CONFIG_PARAMS *StdHeader);
+VOID ExitEcConfig (IN AMD_CONFIG_PARAMS *StdHeader);
+VOID ReadEc8 (IN UINT8 Address, IN UINT8* Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID WriteEc8 (IN UINT8 Address, IN UINT8* Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID RwEc8 (IN UINT8 Address, IN UINT8 AndMask, IN UINT8 OrMask, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID WriteECmsg (IN UINT8 Address, IN UINT8 OpFlag, IN VOID* Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID ReadECmsg (IN UINT8 Address, IN UINT8 OpFlag, OUT VOID* Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID WaitForEcLDN9MailboxCmdAck (IN AMD_CONFIG_PARAMS *StdHeader);
+
+VOID ImcSleep (IN VOID *FchDataPtr);
+VOID ImcEnableSurebootTimer (IN VOID *FchDataPtr);
+VOID ImcDisarmSurebootTimer (IN VOID *FchDataPtr);
+VOID ImcDisableSurebootTimer (IN VOID *FchDataPtr);
+VOID ImcWakeup (IN VOID *FchDataPtr);
+VOID ImcIdle (IN VOID *FchDataPtr);
+BOOLEAN ValidateImcFirmware (IN VOID *FchDataPtr);
+VOID SoftwareToggleImcStrapping (IN VOID *FchDataPtr);
+
+
+///
+/// Fch Ir Routines
+///
+/// Dxe Phase
+///
+
+///
+/// Fch Pcib Routines
+///
+/// Pei Phase
+///
+VOID FchInitResetPcib (IN VOID* FchDataPtr);
+VOID FchInitResetPcibPort80Enable (IN VOID* FchDataPtr);
+
+
+
+///
+/// Fch SATA Routines
+///
+/// Pei Phase
+///
+VOID FchInitResetSata (IN VOID *FchDataPtr);
+VOID FchInitResetSataProgram (IN VOID *FchDataPtr);
+///
+/// Dxe Phase
+///
+VOID FchInitMidSata (IN VOID *FchDataPtr);
+VOID FchInitEnvSata (IN VOID *FchDataPtr);
+VOID FchInitEnvProgramSataPciRegs (IN VOID *FchDataPtr);
+VOID FchInitMidProgramSataRegs (IN VOID *FchDataPtr);
+VOID FchInitLateProgramSataRegs (IN VOID *FchDataPtr);
+
+VOID FchInitLateSata (IN VOID *FchDataPtr);
+VOID FchInitEnvSataIde (IN VOID *FchDataPtr);
+VOID FchInitMidSataIde (IN VOID *FchDataPtr);
+VOID FchInitLateSataIde (IN VOID *FchDataPtr);
+VOID FchInitEnvSataAhci (IN VOID *FchDataPtr);
+VOID FchInitMidSataAhci (IN VOID *FchDataPtr);
+VOID FchInitLateSataAhci (IN VOID *FchDataPtr);
+VOID FchInitEnvSataRaid (IN VOID *FchDataPtr);
+VOID FchInitMidSataRaid (IN VOID *FchDataPtr);
+VOID FchInitLateSataRaid (IN VOID *FchDataPtr);
+VOID FchInitEnvSataIde2Ahci (IN VOID *FchDataPtr);
+VOID FchInitMidSataIde2Ahci (IN VOID *FchDataPtr);
+VOID FchInitLateSataIde2Ahci (IN VOID *FchDataPtr);
+
+VOID SataAhciSetDeviceNumMsi (IN VOID *FchDataPtr);
+VOID SataRaidSetDeviceNumMsi (IN VOID *FchDataPtr);
+VOID SataIde2AhciSetDeviceNumMsi (IN VOID *FchDataPtr);
+VOID SataSetIrqIntResource (IN VOID *FchDataPtr, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID SataBar5setting (IN VOID *FchDataPtr, IN UINT32 *Bar5Ptr);
+VOID SataEnableWriteAccess (IN AMD_CONFIG_PARAMS *StdHeader);
+VOID SataDisableWriteAccess (IN AMD_CONFIG_PARAMS *StdHeader);
+VOID SataSetDeviceNumMsi (IN VOID *FchDataPtr);
+VOID FchSataSetDeviceNumMsi (IN VOID *FchDataPtr);
+VOID ShutdownUnconnectedSataPortClock (IN VOID *FchDataPtr, IN UINT32 Bar5);
+VOID FchShutdownUnconnectedSataPortClock (IN VOID *FchDataPtr, IN UINT32 Bar5);
+VOID SataDriveDetection (IN VOID *FchDataPtr, IN UINT32 *Bar5Ptr);
+VOID FchSataDriveDetection (IN VOID *FchDataPtr, IN UINT32 *Bar5Ptr);
+VOID FchSataGpioInitial (IN VOID *FchDataPtr);
+VOID SataBar5RegSet (IN VOID *FchDataPtr);
+VOID SataSetPortGenMode (IN VOID *FchDataPtr);
+VOID FchSataSetPortGenMode (IN VOID *FchDataPtr);
+VOID FchProgramSataPhy (IN AMD_CONFIG_PARAMS *StdHeader);
+VOID FchSataDriveFpga (IN VOID *FchDataPtr);
+
+///
+/// FCH USB Controller Public Function
+///
+/// Pei Phase
+///
+VOID FchInitResetUsb (IN VOID *FchDataPtr);
+VOID FchInitResetOhci (IN VOID *FchDataPtr);
+VOID FchInitResetEhci (IN VOID *FchDataPtr);
+VOID FchInitResetXhci (IN VOID *FchDataPtr);
+VOID FchInitResetXhciProgram (IN VOID *FchDataPtr);
+///
+/// Dxe Phase
+///
+VOID FchInitEnvUsb (IN VOID *FchDataPtr);
+VOID FchInitMidUsb (IN VOID *FchDataPtr);
+VOID FchInitLateUsb (IN VOID *FchDataPtr);
+VOID FchInitEnvUsbOhci (IN VOID *FchDataPtr);
+VOID FchInitMidUsbOhci (IN VOID *FchDataPtr);
+VOID FchInitLateUsbOhci (IN VOID *FchDataPtr);
+VOID FchInitEnvUsbEhci (IN VOID *FchDataPtr);
+VOID FchInitMidUsbEhci (IN VOID *FchDataPtr);
+VOID FchInitLateUsbEhci (IN VOID *FchDataPtr);
+VOID FchInitEnvUsbXhci (IN VOID *FchDataPtr);
+VOID FchInitMidUsbXhci (IN VOID *FchDataPtr);
+VOID FchInitLateUsbXhci (IN VOID *FchDataPtr);
+VOID FchInitMidUsbOhci1 (IN VOID *FchDataPtr);
+VOID FchInitMidUsbOhci2 (IN VOID *FchDataPtr);
+VOID FchInitMidUsbOhci3 (IN VOID *FchDataPtr);
+VOID FchInitMidUsbOhci4 (IN VOID *FchDataPtr);
+VOID FchInitMidUsbEhci1 (IN FCH_DATA_BLOCK *FchDataPtr);
+VOID FchInitMidUsbEhci2 (IN FCH_DATA_BLOCK *FchDataPtr);
+VOID FchInitMidUsbEhci3 (IN FCH_DATA_BLOCK *FchDataPtr);
+///
+/// Other Public Routines
+///
+VOID FchSetUsbEnableReg (IN FCH_DATA_BLOCK *FchDataPtr);
+VOID FchOhciInitAfterPciInit (IN UINT32 Value, IN FCH_DATA_BLOCK* FchDataPtr);
+VOID FchEhciInitAfterPciInit (IN UINT32 Value, IN FCH_DATA_BLOCK* FchDataPtr);
+VOID FchXhciInitBeforePciInit (IN FCH_DATA_BLOCK* FchDataPtr);
+VOID FchXhciInitIndirectReg (IN FCH_DATA_BLOCK* FchDataPtr);
+VOID FchInitLateUsbXhciProgram (IN VOID *FchDataPtr);
+VOID FchXhciUsbPhyCalibrated (IN FCH_DATA_BLOCK* FchDataPtr);
+
+
+///
+/// Fch Sd Routines
+///
+VOID FchInitEnvSd (IN VOID *FchDataPtr);
+VOID FchInitMidSd (IN VOID *FchDataPtr);
+VOID FchInitLateSd (IN VOID *FchDataPtr);
+
+///
+/// Other Public Routines
+///
+
+VOID FchInitEnvSdProgram (IN VOID *FchDataPtr);
+
+///
+/// Fch Spi Routines
+///
+/// Pei Phase
+///
+VOID FchInitResetSpi (IN VOID *FchDataPtr);
+VOID FchInitResetLpc (IN VOID *FchDataPtr);
+VOID FchInitResetLpcProgram (IN VOID *FchDataPtr);
+///
+/// Dxe Phase
+///
+VOID FchInitEnvSpi (IN VOID *FchDataPtr);
+VOID FchInitMidSpi (IN VOID *FchDataPtr);
+VOID FchInitLateSpi (IN VOID *FchDataPtr);
+VOID FchInitEnvLpc (IN VOID *FchDataPtr);
+VOID FchInitMidLpc (IN VOID *FchDataPtr);
+VOID FchInitLateLpc (IN VOID *FchDataPtr);
+VOID FchInitEnvLpcProgram (IN VOID *FchDataPtr);
+///
+/// Other Public Routines
+///
+VOID FchSpiUnlock (IN VOID *FchDataPtr);
+VOID FchSpiLock (IN VOID *FchDataPtr);
+
+/*--------------------------- Documentation Pages ---------------------------*/
+VOID FchStall (IN UINT32 uSec, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID CimFchStall (IN UINT32 uSec, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID FchPciReset (IN AMD_CONFIG_PARAMS *StdHeader);
+VOID OutPort80 (IN UINT32 pcode, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID TurnOffCG2 (OUT VOID);
+VOID BackUpCG2 (OUT VOID);
+VOID FchCopyMem (IN VOID* pDest, IN VOID* pSource, IN UINTN Length);
+VOID* GetRomSigPtr (IN UINTN* RomSigPtr, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID RwXhciIndReg (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID RwXhci0IndReg (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID RwXhci1IndReg (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID ReadXhci0Phy (IN UINT32 Port, IN UINT32 Address, IN UINT32 *Value, IN AMD_CONFIG_PARAMS *StdHeader);
+VOID AcLossControl (IN UINT8 AcLossControlValue);
+VOID FchVgaInit (OUT VOID);
+VOID RecordFchConfigPtr (IN UINT32 FchConfigPtr);
+VOID ValidateFchVariant (IN VOID *FchDataPtr);
+VOID RecordSmiStatus (IN AMD_CONFIG_PARAMS *StdHeader);
+BOOLEAN IsGCPU (IN VOID *FchDataPtr);
+BOOLEAN IsExternalClockMode (IN VOID *FchDataPtr);
+VOID SbSleepTrapControl (IN BOOLEAN SleepTrap);
+
+AGESA_STATUS
+FchSpiTransfer (
+ IN UINT8 PrefixCode,
+ IN UINT8 Opcode,
+ IN OUT UINT8 *DataPtr,
+ IN UINT8 *AddressPtr,
+ IN UINT8 Length,
+ IN BOOLEAN WriteFlag,
+ IN BOOLEAN AddressFlag,
+ IN BOOLEAN DataFlag,
+ IN BOOLEAN FinishedFlag
+ );
+
+BOOLEAN
+FchPlatformSpiQe (
+ IN VOID *FchDataPtr
+ );
+
+#endif
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchLib.c
new file mode 100644
index 0000000..091552a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchLib.c
@@ -0,0 +1,598 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH IO access common routine
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_COMMON_FCHLIB_FILECODE
+
+/**< FchStall - Reserved */
+VOID
+FchStall (
+ IN UINT32 uSec,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 timerAddr;
+ UINT32 startTime;
+ UINT32 elapsedTime;
+
+ LibAmdMemRead (AccessWidth16, (UINT64) (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG64), &timerAddr, StdHeader);
+ if ( timerAddr == 0 ) {
+ uSec = uSec / 2;
+ while ( uSec != 0 ) {
+ LibAmdIoRead (AccessWidth8, FCHOEM_IO_DELAY_PORT, (UINT8 *) (&startTime), StdHeader);
+ uSec--;
+ }
+ } else {
+ LibAmdIoRead (AccessWidth32, timerAddr, &startTime, StdHeader);
+ for ( ;; ) {
+ LibAmdIoRead (AccessWidth32, timerAddr, &elapsedTime, StdHeader);
+ if ( elapsedTime < startTime ) {
+ elapsedTime = elapsedTime + FCH_MAX_TIMER - startTime;
+ } else {
+ elapsedTime = elapsedTime - startTime;
+ }
+ if ( (elapsedTime * FCHOEM_ELAPSED_TIME_UNIT / FCHOEM_ELAPSED_TIME_DIVIDER) > uSec ) {
+ break;
+ }
+ }
+ }
+}
+
+/**< cimFchStall - Reserved */
+VOID
+CimFchStall (
+ IN UINT32 uSec,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 timerAddr;
+ UINT32 startTime;
+ UINT32 elapsedTime;
+
+ LibAmdMemRead (AccessWidth16, (UINT64) (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG64), &timerAddr, StdHeader);
+ if ( timerAddr == 0 ) {
+ uSec = uSec / 2;
+ while ( uSec != 0 ) {
+ LibAmdIoRead (AccessWidth8, FCHOEM_IO_DELAY_PORT, (UINT8*)&elapsedTime, StdHeader);
+ uSec--;
+ }
+ } else {
+ LibAmdIoRead (AccessWidth32, timerAddr, &startTime, StdHeader);
+ for ( ;; ) {
+ LibAmdIoRead (AccessWidth32, timerAddr, &elapsedTime, StdHeader);
+ if ( elapsedTime < startTime ) {
+ elapsedTime = elapsedTime + FCH_MAX_TIMER - startTime;
+ } else {
+ elapsedTime = elapsedTime - startTime;
+ }
+ if ( (elapsedTime * FCHOEM_ELAPSED_TIME_UNIT / FCHOEM_ELAPSED_TIME_DIVIDER) > uSec ) {
+ break;
+ }
+ }
+ }
+}
+
+/**< FchReset - Reserved */
+VOID
+FchPciReset (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 PciRstValue;
+
+ PciRstValue = 0x06;
+ LibAmdIoWrite (AccessWidth8, FCH_PCIRST_BASE_IO, &PciRstValue, StdHeader);
+}
+
+/**< outPort80 - Reserved */
+VOID
+OutPort80 (
+ IN UINT32 pcode,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ LibAmdIoWrite (AccessWidth8, FCHOEM_OUTPUT_DEBUG_PORT, &pcode, StdHeader);
+ return;
+}
+
+/**< FchCopyMem - Reserved */
+VOID
+FchCopyMem (
+ IN VOID* pDest,
+ IN VOID* pSource,
+ IN UINTN Length
+ )
+{
+ UINTN i;
+ UINT8 *Ptr;
+ UINT8 *Source;
+ Ptr = (UINT8*)pDest;
+ Source = (UINT8*)pSource;
+ for (i = 0; i < Length; i++) {
+ *Ptr = *Source;
+ Source++;
+ Ptr++;
+ }
+}
+
+/** GetRomSigPtr - Reserved **/
+VOID*
+GetRomSigPtr (
+ IN UINTN *RomSigPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 RomPtr;
+ UINT32 RomSig;
+ UINT16 MswAddr;
+
+ *RomSigPtr = 0;
+ MswAddr = 0xFFF0;
+ do {
+ RomPtr = (MswAddr << 16) + FCH_ROMSIG_BASE_IO;
+ LibAmdMemRead (AccessWidth32, (UINT64) RomPtr, &RomSig, StdHeader);
+ if (RomSig == FCH_ROMSIG_SIGNATURE) {
+ *RomSigPtr = RomPtr;
+ break;
+ }
+ MswAddr <<= 1;
+ } while (MswAddr != 0xFE00);
+ return RomSigPtr;
+}
+
+/** RwXhciIndReg - Reserved **/
+VOID
+RwXhciIndReg (
+ IN UINT32 Index,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 RevReg;
+ PCI_ADDR PciAddress;
+
+ PciAddress.AddressValue = (USB_XHCI_BUS_DEV_FUN << 12) + 0x48;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &Index, StdHeader);
+ PciAddress.AddressValue = (USB_XHCI_BUS_DEV_FUN << 12) + 0x4C;
+ RevReg = ~AndMask;
+ LibAmdPciRMW (AccessWidth32, PciAddress, &OrMask, &RevReg, StdHeader);
+
+ PciAddress.AddressValue = (USB_XHCI1_BUS_DEV_FUN << 12) + 0x48;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &Index, StdHeader);
+ PciAddress.AddressValue = (USB_XHCI1_BUS_DEV_FUN << 12) + 0x4C;
+ RevReg = ~AndMask;
+ LibAmdPciRMW (AccessWidth32, PciAddress, &OrMask, &RevReg, StdHeader);
+}
+
+/** RwXhci0IndReg - Reserved **/
+VOID
+RwXhci0IndReg (
+ IN UINT32 Index,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 RevReg;
+ PCI_ADDR PciAddress;
+
+ PciAddress.AddressValue = (USB_XHCI_BUS_DEV_FUN << 12) + 0x48;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &Index, StdHeader);
+ PciAddress.AddressValue = (USB_XHCI_BUS_DEV_FUN << 12) + 0x4C;
+ RevReg = ~AndMask;
+ LibAmdPciRMW (AccessWidth32, PciAddress, &OrMask, &RevReg, StdHeader);
+}
+
+
+/** ReadXhci0Phy - Reserved **/
+VOID
+ReadXhci0Phy (
+ IN UINT32 Port,
+ IN UINT32 Address,
+ IN UINT32 *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 RegIndex;
+ UINT32 RegValue;
+ PCI_ADDR PciAddress;
+
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + BIT12 + Address, StdHeader);
+
+ RegIndex = FCH_XHCI_IND60_REG04;
+ PciAddress.AddressValue = (USB_XHCI_BUS_DEV_FUN << 12) + 0x48;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &RegIndex, StdHeader);
+ PciAddress.AddressValue = (USB_XHCI_BUS_DEV_FUN << 12) + 0x4C;
+ LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader);
+
+ (*Value) = ( RegValue >> (Port * 8)) & 0x000000FF;
+}
+
+
+/** AcLossControl - Reserved **/
+VOID
+AcLossControl (
+ IN UINT8 AcLossControlValue
+ )
+{
+ AcLossControlValue &= 0x03;
+ AcLossControlValue |= BIT2;
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG5B, AccessWidth8, 0xF0, AcLossControlValue);
+}
+
+/** RecordFchConfigPtr - Reserved **/
+VOID
+RecordFchConfigPtr (
+ IN UINT32 FchConfigPtr
+ )
+{
+ RwMem (ACPI_MMIO_BASE + CMOS_RAM_BASE + 0x08, AccessWidth8, 0, (UINT8) ((FchConfigPtr >> 0) & 0xFF) );
+ RwMem (ACPI_MMIO_BASE + CMOS_RAM_BASE + 0x09, AccessWidth8, 0, (UINT8) ((FchConfigPtr >> 8) & 0xFF) );
+ RwMem (ACPI_MMIO_BASE + CMOS_RAM_BASE + 0x0A, AccessWidth8, 0, (UINT8) ((FchConfigPtr >> 16) & 0xFF) );
+ RwMem (ACPI_MMIO_BASE + CMOS_RAM_BASE + 0x0B, AccessWidth8, 0, (UINT8) ((FchConfigPtr >> 24) & 0xFF) );
+}
+
+/** ReadAlink - Reserved **/
+UINT32
+ReadAlink (
+ IN UINT32 Index,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Data;
+ LibAmdIoWrite (AccessWidth32, ALINK_ACCESS_INDEX, &Index, StdHeader);
+ LibAmdIoRead (AccessWidth32, ALINK_ACCESS_DATA, &Data, StdHeader);
+ //Clear Index
+ Index = 0;
+ LibAmdIoWrite (AccessWidth32, ALINK_ACCESS_INDEX, &Index, StdHeader);
+ return Data;
+}
+
+/** WriteAlink - Reserved **/
+VOID
+WriteAlink (
+ IN UINT32 Index,
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ LibAmdIoWrite (AccessWidth32, ALINK_ACCESS_INDEX, &Index, StdHeader);
+ LibAmdIoWrite (AccessWidth32, ALINK_ACCESS_DATA, &Data, StdHeader);
+ //Clear Index
+ Index = 0;
+ LibAmdIoWrite (AccessWidth32, ALINK_ACCESS_INDEX, &Index, StdHeader);
+}
+
+/** RwAlink - Reserved **/
+VOID
+RwAlink (
+ IN UINT32 Index,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 AccessType;
+
+ AccessType = Index & 0xE0000000;
+ if (AccessType == (0 << 29)) {
+ WriteAlink ((0x30 | AccessType), Index & 0x1FFFFFFF, StdHeader);
+ Index = 0x34 | AccessType;
+ } else if (AccessType == (2 << 29)) {
+ WriteAlink ((0x38 | AccessType), Index & 0x1FFFFFFF, StdHeader);
+ Index = 0x3C | AccessType;
+ }
+ WriteAlink (Index, (ReadAlink (Index, StdHeader) & AndMask) | OrMask, StdHeader);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read PMIO
+ *
+ *
+ *
+ * @param[in] Address - PMIO Offset value
+ * @param[in] OpFlag - Access sizes
+ * @param[in] Value - Read Data Buffer
+ * @param[in] StdHeader
+ *
+ */
+VOID
+ReadPmio (
+ IN UINT8 Address,
+ IN UINT8 OpFlag,
+ IN VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+
+ OpFlag = OpFlag & 0x7f;
+ OpFlag = 1 << (OpFlag - 1);
+ for (i = 0; i < OpFlag; i++) {
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD6, &Address, StdHeader);
+ Address++;
+ LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGCD7, (UINT8 *)Value + i, StdHeader);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write PMIO
+ *
+ *
+ *
+ * @param[in] Address - PMIO Offset value
+ * @param[in] OpFlag - Access sizes
+ * @param[in] Value - Write Data Buffer
+ * @param[in] StdHeader
+ *
+ */
+VOID
+WritePmio (
+ IN UINT8 Address,
+ IN UINT8 OpFlag,
+ IN VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+
+ OpFlag = OpFlag & 0x7f;
+ OpFlag = 1 << (OpFlag - 1);
+ for (i = 0; i < OpFlag; i++) {
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD6, &Address, StdHeader);
+ Address++;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD7, (UINT8 *)Value + i, StdHeader);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * RwPmio - Read/Write PMIO
+ *
+ *
+ *
+ * @param[in] Address - PMIO Offset value
+ * @param[in] OpFlag - Access sizes
+ * @param[in] AndMask - Data And Mask 32 bits
+ * @param[in] OrMask - Data OR Mask 32 bits
+ * @param[in] StdHeader
+ *
+ */
+VOID
+RwPmio (
+ IN UINT8 Address,
+ IN UINT8 OpFlag,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Result;
+
+ ReadPmio (Address, OpFlag, &Result, StdHeader);
+ Result = (Result & AndMask) | OrMask;
+ WritePmio (Address, OpFlag, &Result, StdHeader);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read PMIO2
+ *
+ *
+ *
+ * @param[in] Address - PMIO2 Offset value
+ * @param[in] OpFlag - Access sizes
+ * @param[in] Value - Read Data Buffer
+ * @param[in] StdHeader
+ *
+ */
+VOID
+ReadPmio2 (
+ IN UINT8 Address,
+ IN UINT8 OpFlag,
+ IN VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+
+ OpFlag = OpFlag & 0x7f;
+ OpFlag = 1 << (OpFlag - 1);
+ for ( i = 0; i < OpFlag; i++ ) {
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD0, &Address, StdHeader);
+ Address++;
+ LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGCD1, (UINT8 *) Value + i, StdHeader);
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write PMIO 2
+ *
+ *
+ *
+ * @param[in] Address - PMIO2 Offset value
+ * @param[in] OpFlag - Access sizes
+ * @param[in] Value - Write Data Buffer
+ * @param[in] StdHeader
+ *
+ */
+VOID
+WritePmio2 (
+ IN UINT8 Address,
+ IN UINT8 OpFlag,
+ IN VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+
+ OpFlag = OpFlag & 0x7f;
+ OpFlag = 1 << (OpFlag - 1);
+
+ for ( i = 0; i < OpFlag; i++ ) {
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD0, &Address, StdHeader);
+ Address++;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD1, (UINT8 *) Value + i, StdHeader);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * RwPmio2 - Read/Write PMIO2
+ *
+ *
+ *
+ * @param[in] Address - PMIO2 Offset value
+ * @param[in] OpFlag - Access sizes
+ * @param[in] AndMask - Data And Mask 32 bits
+ * @param[in] OrMask - Data OR Mask 32 bits
+ * @param[in] StdHeader
+ *
+ */
+VOID
+RwPmio2 (
+ IN UINT8 Address,
+ IN UINT8 OpFlag,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Result;
+
+ ReadPmio2 (Address, OpFlag, &Result, StdHeader);
+ Result = (Result & AndMask) | OrMask;
+ WritePmio2 (Address, OpFlag, &Result, StdHeader);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read BIOSRAM
+ *
+ *
+ *
+ * @param[in] Address - BIOSRAM Offset value
+ * @param[in] OpFlag - Access sizes
+ * @param[in] Value - Read Data Buffer
+ * @param[in] StdHeader
+ *
+ */
+VOID
+ReadBiosram (
+ IN UINT8 Address,
+ IN UINT8 OpFlag,
+ IN VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+
+ OpFlag = OpFlag & 0x7f;
+ OpFlag = 1 << (OpFlag - 1);
+ for (i = 0; i < OpFlag; i++) {
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD4, &Address, StdHeader);
+ Address++;
+ LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGCD5, (UINT8 *)Value + i, StdHeader);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write BIOSRAM
+ *
+ *
+ *
+ * @param[in] Address - BIOSRAM Offset value
+ * @param[in] OpFlag - Access sizes
+ * @param[in] Value - Write Data Buffer
+ * @param[in] StdHeader
+ *
+ */
+VOID
+WriteBiosram (
+ IN UINT8 Address,
+ IN UINT8 OpFlag,
+ IN VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+
+ OpFlag = OpFlag & 0x7f;
+ OpFlag = 1 << (OpFlag - 1);
+ for (i = 0; i < OpFlag; i++) {
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD4, &Address, StdHeader);
+ Address++;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGCD5, (UINT8 *)Value + i, StdHeader);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Record SMI Status
+ *
+ *
+ * @param[in] StdHeader
+ *
+ */
+VOID
+RecordSmiStatus (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINTN Index;
+ UINT8 SwSmiValue;
+
+ ACPIMMIO8 (0xfed80320) |= 0x01;
+ for ( Index = 0; Index < 20; Index++ ) {
+ ACPIMMIO8 (0xfed10020 + Index) = ACPIMMIO8 (0xfed80280 + Index);
+ }
+ LibAmdIoRead (AccessWidth8, 0xB0, &SwSmiValue, StdHeader);
+ ACPIMMIO8 (0xfed10040) = SwSmiValue;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchPeLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchPeLib.c
new file mode 100644
index 0000000..0905557
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/FchPeLib.c
@@ -0,0 +1,260 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH IO access common routine
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_COMMON_FCHPELIB_FILECODE
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * ProgramPciByteTable - Program PCI register by table (8 bits data)
+ *
+ *
+ *
+ * @param[in] pPciByteTable - Table data pointer
+ * @param[in] dwTableSize - Table length
+ * @param[in] StdHeader
+ *
+ */
+VOID
+ProgramPciByteTable (
+ IN REG8_MASK *pPciByteTable,
+ IN UINT16 dwTableSize,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+ UINT8 dbBusNo;
+ UINT8 dbDevFnNo;
+ UINT8 Or8;
+ UINT8 Mask8;
+ PCI_ADDR PciAddress;
+
+ dbBusNo = pPciByteTable->RegIndex;
+ dbDevFnNo = pPciByteTable->AndMask;
+ pPciByteTable++;
+
+ for ( i = 1; i < dwTableSize; i++ ) {
+ if ( (pPciByteTable->RegIndex == 0xFF) && (pPciByteTable->AndMask == 0xFF) && (pPciByteTable->OrMask == 0xFF) ) {
+ pPciByteTable++;
+ dbBusNo = pPciByteTable->RegIndex;
+ dbDevFnNo = pPciByteTable->AndMask;
+ pPciByteTable++;
+ i++;
+ } else {
+ PciAddress.AddressValue = (dbBusNo << 20) + (dbDevFnNo << 12) + pPciByteTable->RegIndex;
+ Or8 = pPciByteTable->OrMask;
+ Mask8 = ~pPciByteTable->AndMask;
+ LibAmdPciRMW (AccessWidth8, PciAddress, &Or8, &Mask8, StdHeader);
+ pPciByteTable++;
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * ProgramFchAcpiMmioTbl - Program FCH ACPI MMIO register by table (8 bits data)
+ *
+ *
+ *
+ * @param[in] pAcpiTbl - Table data pointer
+ * @param[in] StdHeader
+ *
+ */
+VOID
+ProgramFchAcpiMmioTbl (
+ IN ACPI_REG_WRITE *pAcpiTbl,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+ UINT8 Or8;
+ UINT8 Mask8;
+ UINT32 ddtempVar;
+
+ if (pAcpiTbl != NULL) {
+ if ((pAcpiTbl->MmioReg == 0) && (pAcpiTbl->MmioBase == 0) && (pAcpiTbl->DataAndMask == 0xB0) && (pAcpiTbl->DataOrMask == 0xAC)) {
+ // Signature Checking
+ pAcpiTbl++;
+ for ( i = 1; pAcpiTbl->MmioBase < 0x1D; i++ ) {
+ ddtempVar = ACPI_MMIO_BASE | (pAcpiTbl->MmioBase) << 8 | pAcpiTbl->MmioReg;
+ Or8 = pAcpiTbl->DataOrMask;
+ Mask8 = ~pAcpiTbl->DataAndMask;
+ LibAmdMemRMW (AccessWidth8, (UINT64) ddtempVar, &Or8, &Mask8, StdHeader);
+ pAcpiTbl++;
+ }
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * ProgramFchGpioTbl - Program FCH Gpio table (8 bits data)
+ *
+ *
+ *
+ * @param[in] pGpioTbl - Table data pointer
+ * @param[in] FchResetDataBlock
+ *
+ */
+VOID
+ProgramFchGpioTbl (
+ IN GPIO_CONTROL *pGpioTbl,
+ IN FCH_RESET_DATA_BLOCK *FchResetDataBlock
+ )
+{
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ UINT32 ddtempVar;
+ StdHeader = FchResetDataBlock->StdHeader;
+
+ if (pGpioTbl != NULL) {
+ while (pGpioTbl->GpioPin != 0xFF) {
+ ddtempVar = ACPI_MMIO_BASE | IOMUX_BASE | pGpioTbl->GpioPin;
+ LibAmdMemWrite (AccessWidth8, (UINT64) ddtempVar, &pGpioTbl->PinFunction, StdHeader);
+ ddtempVar = ACPI_MMIO_BASE | GPIO_BASE | pGpioTbl->GpioPin;
+ LibAmdMemWrite (AccessWidth8, (UINT64) ddtempVar, &pGpioTbl->CfgByte, StdHeader);
+ pGpioTbl++;
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * ProgramSataPhyTbl - Program FCH Sata Phy table (8 bits data)
+ *
+ *
+ *
+ * @param[in] pSataPhyTbl - Table data pointer
+ * @param[in] FchResetDataBlock
+ *
+ */
+VOID
+ProgramFchSataPhyTbl (
+ IN SATA_PHY_CONTROL *pSataPhyTbl,
+ IN FCH_RESET_DATA_BLOCK *FchResetDataBlock
+ )
+{
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ //UINT32 ddtempVar;
+ StdHeader = FchResetDataBlock->StdHeader;
+
+ if (pSataPhyTbl != NULL) {
+ while (pSataPhyTbl->PhyData != 0xFFFFFFFF) {
+ //to be implemented
+ pSataPhyTbl++;
+ }
+ }
+}
+
+/**
+ * GetChipSysMode - Get Chip status
+ *
+ *
+ * @param[in] Value - Return Chip strap status
+ * StrapStatus [15.0] - Hudson-2 chip Strap Status
+ * @li <b>0001</b> - Not USED FWH
+ * @li <b>0002</b> - Not USED LPC ROM
+ * @li <b>0004</b> - EC enabled
+ * @li <b>0008</b> - Reserved
+ * @li <b>0010</b> - Internal Clock mode
+ * @param[in] StdHeader
+ *
+ */
+VOID
+GetChipSysMode (
+ IN VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ LibAmdMemRead (AccessWidth8, (UINT64) (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG80), Value, StdHeader);
+}
+
+/**
+ * IsImcEnabled - Is IMC Enabled
+ * @retval TRUE for IMC Enabled; FALSE for IMC Disabled
+ */
+BOOLEAN
+IsImcEnabled (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 dbSysConfig;
+ GetChipSysMode (&dbSysConfig, StdHeader);
+ if (dbSysConfig & ChipSysEcEnable) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * SbSleepTrapControl - SB Sleep Trap Control
+ *
+ *
+ *
+ * @param[in] SleepTrap - Whether sleep trap is enabled
+ *
+ */
+VOID
+SbSleepTrapControl (
+ IN BOOLEAN SleepTrap
+ )
+{
+ if (SleepTrap) {
+ ACPIMMIO32 (ACPI_MMIO_BASE + SMI_BASE + FCH_SMI_REGB0) &= ~(BIT2 + BIT3);
+ ACPIMMIO32 (ACPI_MMIO_BASE + SMI_BASE + FCH_SMI_REGB0) |= BIT2;
+
+ ACPIMMIO8 (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGBE) &= ~ (BIT5);
+ ACPIMMIO8 (ACPI_MMIO_BASE + PMIO_BASE + 0xB) &= ~ (BIT0 + BIT1);
+ ACPIMMIO8 (ACPI_MMIO_BASE + PMIO_BASE + 0xB) |= BIT1;
+ } else {
+ ACPIMMIO8 (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGBE) |= BIT5;
+ ACPIMMIO8 (ACPI_MMIO_BASE + PMIO_BASE + 0xB) &= ~ (BIT0 + BIT1);
+ ACPIMMIO8 (ACPI_MMIO_BASE + PMIO_BASE + 0xB) |= BIT0;
+
+ ACPIMMIO32 (ACPI_MMIO_BASE + SMI_BASE + FCH_SMI_REGB0) &= ~(BIT2 + BIT3);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/MemLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/MemLib.c
new file mode 100644
index 0000000..08bd0f9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/MemLib.c
@@ -0,0 +1,145 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH memory access lib
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Ids.h"
+#define FILECODE PROC_FCH_COMMON_MEMLIB_FILECODE
+
+
+/**
+ * ReadMem - Read FCH BAR Memory
+ *
+ * @param[in] Address - Memory BAR address
+ * @param[in] OpFlag - Access width
+ * @param[in] *ValuePtr - In/Out value pointer
+ *
+ */
+VOID
+ReadMem (
+ IN UINT32 Address,
+ IN UINT8 OpFlag,
+ IN VOID *ValuePtr
+ )
+{
+ OpFlag = OpFlag & 0x7f;
+
+ switch ( OpFlag ) {
+ case AccessWidth8:
+ *((UINT8*)ValuePtr) = *((UINT8*) ((UINTN)Address));
+ break;
+
+ case AccessWidth16:
+ *((UINT16*)ValuePtr) = *((UINT16*) ((UINTN)Address));
+ break;
+
+ case AccessWidth32:
+ *((UINT32*)ValuePtr) = *((UINT32*) ((UINTN)Address));
+ break;
+
+ default:
+ ASSERT (FALSE);
+ break;
+ }
+}
+
+/**
+ * WriteMem - Write FCH BAR Memory
+ *
+ * @param[in] Address - Memory BAR address
+ * @param[in] OpFlag - Access width
+ * @param[in] *ValuePtr - In/Out Value pointer
+ *
+ */
+VOID
+WriteMem (
+ IN UINT32 Address,
+ IN UINT8 OpFlag,
+ IN VOID *ValuePtr
+ )
+{
+ OpFlag = OpFlag & 0x7f;
+
+ switch ( OpFlag ) {
+ case AccessWidth8 :
+ *((UINT8*) ((UINTN)Address)) = *((UINT8*)ValuePtr);
+ break;
+
+ case AccessWidth16:
+ *((UINT16*) ((UINTN)Address)) = *((UINT16*)ValuePtr);
+ break;
+
+ case AccessWidth32:
+ *((UINT32*) ((UINTN)Address)) = *((UINT32*)ValuePtr);
+ break;
+
+ default:
+ ASSERT (FALSE);
+ break;
+ }
+}
+
+/**
+ * RwMem - Read & Write FCH BAR Memory
+ *
+ * @param[in] Address - Memory BAR address
+ * @param[in] OpFlag - Access width
+ * @param[in] Mask - Mask Value of data
+ * @param[in] Data - Write data
+ *
+ */
+VOID
+RwMem (
+ IN UINT32 Address,
+ IN UINT8 OpFlag,
+ IN UINT32 Mask,
+ IN UINT32 Data
+ )
+{
+ UINT32 Result;
+
+ ReadMem (Address, OpFlag, &Result);
+ Result = (Result & Mask) | Data;
+ WriteMem (Address, OpFlag, &Result);
+ ReadMem (Address, OpFlag, &Result);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/PciLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/PciLib.c
new file mode 100644
index 0000000..6ef1bd0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Common/PciLib.c
@@ -0,0 +1,94 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH PCI access lib
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_COMMON_PCILIB_FILECODE
+
+VOID
+ReadPci (
+ IN UINT32 Address,
+ IN UINT8 OpFlag,
+ IN VOID* Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+
+ PciAddress.AddressValue = ((Address >> 4) & ~0xFFF) + (Address & 0xFFF);
+ LibAmdPciRead ((ACCESS_WIDTH) OpFlag, PciAddress, Value, StdHeader);
+}
+
+
+VOID
+WritePci (
+ IN UINT32 Address,
+ IN UINT8 OpFlag,
+ IN VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+
+ PciAddress.AddressValue = ((Address >> 4) & ~0xFFF) + (Address & 0xFFF);
+ LibAmdPciWrite ((ACCESS_WIDTH) OpFlag, PciAddress, Value, StdHeader);
+}
+
+
+VOID
+RwPci (
+ IN UINT32 Address,
+ IN UINT8 OpFlag,
+ IN UINT32 Mask,
+ IN UINT32 Data,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+ UINT32 rMask;
+
+ PciAddress.AddressValue = ((Address >> 4) & ~0xFFF) + (Address & 0xFFF);
+ rMask = ~Mask;
+ LibAmdPciRMW ((ACCESS_WIDTH) OpFlag, PciAddress, &Data, &rMask, StdHeader);
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Fch.h b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Fch.h
new file mode 100644
index 0000000..a67439a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Fch.h
@@ -0,0 +1,1624 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH registers definition
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87830 $ @e \$Date: 2013-02-11 12:48:20 -0600 (Mon, 11 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#define FCH_REVISION "0.0.5.0"
+#define FCH_ID "FCH_A05"
+#define FCH_VERSION 0x0000
+
+/**
+ * @page fchinitguide FCH implement phase in AGESA
+ *
+ * FCH provides below access to supported FCH service functions
+ * and data.
+ * - @subpage fchreset "FCH_INIT_RESET"
+ * - @subpage fchenv "FCH_INIT_ENV"
+ * - @subpage fchmid "FCH_INIT_MID"
+ * - @subpage fchlate "FCH_INIT_LATE"
+ * - @subpage fchs3early "FCH_INIT_S3_EARLY_RESTORE"
+ * - @subpage fchs3late "FCH_INIT_S3_LATE_RESTORE"
+ * - @subpage fchsmm "FCH_SMM_SERVICE"
+ * - @subpage fchsmmacpion "FCH_SMM_ACPION"
+ */
+
+/*--------------------------- Documentation Pages ---------------------------*/
+/**
+ * @page fchreset FCH_INIT_RESET
+ * @section FCH_INIT_RESET Interface Call
+ * @par
+ * Initialize structure referenced by FCH_RESET_DATA_BLOCK to default recommended value.
+ * @subsection FCH_INIT_RESET_CallIn Call Prototype
+ * @par
+ * AGESA_STATUS FchInitReset (IN AMD_RESET_PARAMS *ResetParams);
+ * @subsection FCH_INIT_RESET_CallOut Prepare for Callout
+ * @par
+ * Not Applicable (Not necessary for the current implementation)
+ * @subsection FCH_INIT_RESET_Config Prepare for Configuration Data.
+ * @par
+ * <TABLE border="0">
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSmbus0BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSmbus1BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSioPmeBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgWatchDogTimerBase </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPm1EvtBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPm1CntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiPmTmrBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgCpuControlBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgAcpiGpe0BlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSmiCmdPortAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_RESET_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_RESET_INTERFACE::IdeEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * </TABLE>
+ *
+ */
+
+/*--------------------------- Documentation Pages ---------------------------*/
+/**
+ * @page fchenv FCH_INIT_ENV
+ * @section FCH_INIT_ENV Interface Call
+ * @par
+ * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value.
+ * @subsection FCH_INIT_ENV_CallIn Call Prototype
+ * @par
+ * AGESA_STATUS FchInitEnv (IN AMD_ENV_PARAMS *EnvParams);
+ * @subsection FCH_INIT_ENV_CallOut Prepare for Callout
+ * @par
+ * Not Applicable (Not necessary for the current implementation)
+ * @subsection FCH_INIT_ENV_Config Prepare for Configuration Data.
+ * @par
+ * <TABLE border="0">
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SdConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IrConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataIdeMode </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci1Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci2Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci3Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci4Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::XhciSwitch </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * </TABLE>
+ *
+ */
+
+/*--------------------------- Documentation Pages ---------------------------*/
+/**
+ * @page fchmid FCH_INIT_MID
+ * @section FCH_INIT_MID Interface Call
+ * @par
+ * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value.
+ * @subsection FCH_INIT_MID_CallIn Call Prototype
+ * @par
+ * AGESA_STATUS FchInitMid (IN AMD_MID_PARAMS *MidParams);
+ * @subsection FCH_INIT_MID_CallOut Prepare for Callout
+ * @par
+ * Not Applicable (Not necessary for the current implementation)
+ * @subsection FCH_INIT_MID_Config Prepare for Configuration Data.
+ * @par
+ * <TABLE border="0">
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IdeEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::XhciSwitch </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * </TABLE>
+ *
+ */
+
+/*--------------------------- Documentation Pages ---------------------------*/
+/**
+ * @page fchlate FCH_INIT_LATE
+ * @section FCH_INIT_LATE Interface Call
+ * @par
+ * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value.
+ * @subsection FCH_INIT_LATE_CallIn Call Prototype
+ * @par
+ * AGESA_STATUS FchInitLate (IN AMD_S3SAVE_PARAMS *LateParams);
+ * @subsection FCH_INIT_LATE_CallOut Prepare for Callout
+ * @par
+ * Not Applicable (Not necessary for the current implementation)
+ * @subsection FCH_INIT_LATE_Config Prepare for Configuration Data.
+ * @par
+ * <TABLE border="0">
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::XhciSwitch </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+ * </TABLE>
+ *
+ */
+
+/*--------------------------- Documentation Pages ---------------------------*/
+/**
+ * @page fchs3early FCH_INIT_S3_EARLY_RESTORE
+ * @section FCH_INIT_S3_EARLY_RESTORE Interface Call
+ * @par
+ * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value.
+ * @subsection FCH_INIT_S3_EARLY_RESTORE_CallIn Call Prototype
+ * @par
+ * VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr);
+ * @subsection FCH_INIT_S3_EARLY_RESTORE_CallOut Prepare for Callout
+ * @par
+ * Not Applicable (Not necessary for the current implementation)
+ * @subsection FCH_INIT_S3_EARLY_RESTORE_Config Prepare for Configuration Data.
+ * @par
+ * <TABLE border="0">
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SdConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IrConfig </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataIdeMode </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci1Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci2Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci3Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::Ohci4Enable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::XhciSwitch </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * </TABLE>
+ *
+ */
+
+/*--------------------------- Documentation Pages ---------------------------*/
+/**
+ * @page fchs3late FCH_INIT_S3_LATE_RESTORE
+ * @section FCH_INIT_S3_LATE_RESTORE Interface Call
+ * @par
+ * Initialize structure referenced by FCH_DATA_BLOCK to default recommended value.
+ * @subsection FCH_INIT_S3_LATE_RESTORE_CallIn Call Prototype
+ * @par
+ * VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr);
+ * @subsection FCH_INIT_S3_LATE_RESTORE_CallOut Prepare for Callout
+ * @par
+ * Not Applicable (Not necessary for the current implementation)
+ * @subsection FCH_INIT_S3_LATE_RESTORE_Config Prepare for Configuration Data.
+ * @par
+ * <TABLE border="0">
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::AzaliaController </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataClass </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::SataEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::IdeEnable </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> FCH_INTERFACE::XhciSwitch </TD><TD class="indexvalue"><B>Optional </B></TD></TR>
+ * <TR><TD class="indexkey" width=380> BUILD_OPT_CFG::CfgSpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
+ * </TABLE>
+ *
+ */
+
+/*--------------------------- Documentation Pages ---------------------------*/
+/**
+ * @page fchsmm FCH_SMM_SERVICE
+ * @section FCH_SMM_SERVICE Interface Call
+ * Initialize structure referenced by FCHCFG to default recommended value.
+ * @subsection FCH_SMM_SERVICE_CallIn Call Prototype
+ * @par
+ * FchSmmService ((FCHCFG*)pConfig) (Followed PH Interface)
+ * @subsection FCH_SMM_SERVICE_CallID Service ID
+ * @par
+ * <TABLE border="0">
+ * <TR><TD class="indexkey" width=380> FCH_SMM_SERVICE --> 0x00010060 </TD></TR>
+ * </TABLE>
+ * @subsection FCH_SMM_SERVICE_CallOut Prepare for Callout
+ * @par
+ * Not Applicable (Not necessary for the current implementation)
+ * @subsection FCH_SMM_SERVICE_Config Prepare for Configuration Data.
+ * @par
+ * Not necessary on current implementation
+ *
+ */
+#define FCH_SMM_SERVICE 0x00010060ul
+/*--------------------------- Documentation Pages ---------------------------*/
+/**
+ * @page fchsmmacpion FCH_SMM_ACPION
+ * @section FCH_SMM_ACPION Interface Call
+ * Initialize structure referenced by FCHCFG to default recommended value.
+ * @subsection FCH_SMM_ACPION_CallIn Call Prototype
+ * @par
+ * FchSmmAcpiOn ((FCHCFG*)pConfig) (Followed PH Interface)
+ * @subsection FCH_SMM_ACPION_CallID Service ID
+ * @par
+ * <TABLE border="0">
+ * <TR><TD class="indexkey" width=380> FCH_SMM_ACPION --> 0x00010061 </TD></TR>
+ * </TABLE>
+ * @subsection FCH_SMM_ACPION_CallOut Prepare for Callout
+ * @par
+ * Not Applicable (Not necessary for the current implementation)
+ * @subsection FCH_SMM_ACPION_Config Prepare for Configuration Data.
+ * @par
+ * Not necessary on current implementation
+ *
+ */
+#define FCH_SMM_ACPION 0x00010061ul
+
+#ifndef OEM_CALLBACK_BASE
+ #define OEM_CALLBACK_BASE 0x00010100ul
+#endif
+
+//0x00 - 0x0F callback functions are reserved for bootblock
+#define SATA_PHY_PROGRAMMING OEM_CALLBACK_BASE + 0x10
+#define PULL_UP_PULL_DOWN_SETTINGS OEM_CALLBACK_BASE + 0x20
+/*--------------------------- Documentation Pages ---------------------------*/
+/**
+ * @page CB_SBGPP_RESET_ASSERT_Page CB_SBGPP_RESET_ASSERT
+ * @section CB_SBGPP_RESET_ASSERT Interface Call
+ * Initialize structure referenced by FCHCFG to default recommended value.
+ * @subsection CB_SBGPP_RESET_ASSERT_CallID Service ID
+ * @par
+ * <TABLE border="0">
+ * <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_ASSERT --> 0x00010130 </TD></TR>
+ * </TABLE>
+ * @subsection CB_SBGPP_RESET_ASSERT_Config Prepare for Configuration Data.
+ * @par
+ * Not necessary on current implementation
+ *
+ */
+#define CB_SBGPP_RESET_ASSERT OEM_CALLBACK_BASE + 0x30
+/*--------------------------- Documentation Pages ---------------------------*/
+/**
+ * @page CB_SBGPP_RESET_DEASSERT_Page CB_SBGPP_RESET_DEASSERT
+ * @section CB_SBGPP_RESET_DEASSERT Interface Call
+ * Initialize structure referenced by FCHCFG to default recommended value.
+ * @subsection CB_SBGPP_RESET_DEASSERT _CallID Service ID
+ * @par
+ * <TABLE border="0">
+ * <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_DEASSERT --> 0x00010131 </TD></TR>
+ * </TABLE>
+ * @subsection CB_SBGPP_RESET_DEASSERT _Config Prepare for Configuration Data.
+ * @par
+ * Not necessary on current implementation
+ *
+ */
+#define CB_SBGPP_RESET_DEASSERT OEM_CALLBACK_BASE + 0x31
+
+#define CFG_ADDR_PORT 0xCF8
+#define CFG_DATA_PORT 0xCFC
+
+#define ALINK_ACCESS_INDEX 0x0CD8
+#define ALINK_ACCESS_DATA ALINK_ACCESS_INDEX + 4
+
+/*------------------------------------------------------------------
+; I/O Base Address - Should be set by host BIOS
+;------------------------------------------------------------------ */
+#define DELAY_PORT 0x0E0
+
+#define FCH_8259_CONTROL_REG_MASTER 0x20
+#define FCH_8259_MASK_REG_MASTER 0x21
+
+/*------------------------------------------------------------------
+; DEBUG_PORT = 8-bit I/O Port Address for POST Code Display
+;------------------------------------------------------------------ */
+// ASIC VendorID and DeviceIDs
+#define AMD_FCH_VID 0x1022
+#define FCH_DEVICE_ID 0x780B
+#define FCH_SATA_VID AMD_FCH_VID // Dev 17 Func 0
+#define FCH_SATA_DID 0x7800
+#define FCH_SATA_AHCI_DID 0x7801
+#define FCH_SATA_RAID_DID 0x7802
+#define FCH_SATA_RAID5_DID 0x7803
+#define FCH_SATA_AMDAHCI_DID 0x7804
+#define FCH_SATA_RAID_DOTHILL_DID 0x7805
+#define FCH_SATA_RAID5_DOTHILL_DID 0x780A
+#define FCH_USB_OHCI_VID AMD_FCH_VID // Dev 18 Func 0,
+#define FCH_USB_OHCI_DID 0x7807
+#define FCH_USB_EHCI_VID AMD_FCH_VID // Dev 18 Func 2,
+#define FCH_USB_EHCI_DID 0x7808
+#define FCH_USB_XHCI_VID AMD_FCH_VID // Dev 10 Func 0
+#define FCH_USB_XHCI_DID 0x7812
+#define FCH_SMBUS_VID AMD_FCH_VID // Dev 20 Func 0
+#define FCH_SMBUS_DID 0x780B
+#define FCH_IDE_VID AMD_FCH_VID // Dev 20 Func 1
+#define FCH_IDE_DID 0x780C
+#define FCH_AZALIA_VID AMD_FCH_VID // Dev 20 Func 2
+#define FCH_AZALIA_DID 0x780D
+#define FCH_LPC_VID AMD_FCH_VID // Dev 20 Func 3
+#define FCH_LPC_DID 0x780E
+#define FCH_PCIB_VID AMD_FCH_VID // Dev 20 Func 4
+#define FCH_PCIB_DID 0x780F
+#define FCH_USB_OHCIF_VID AMD_FCH_VID // dev 20 Func 5
+#define FCH_USB_OHCIF_DID 0x7809
+#define FCH_NIC_VID 0x14E4 // Dev 20 Func 6
+#define FCH_NIC_DID 0x1699
+#define FCH_SD_VID AMD_FCH_VID // Dev 20 Func 7
+#define FCH_SD_DID 0x7806
+
+
+#define FCH_YANGTZE 0x39
+//Misc
+#define R_FCH_ACPI_PM1_STATUS 0x00
+#define R_FCH_ACPI_PM1_ENABLE 0x02
+#define R_FCH_ACPI_PM_CONTROL 0x04
+#define R_FCH_ACPI_EVENT_STATUS 0x20
+#define R_FCH_ACPI_EVENT_ENABLE 0x24
+#define R_FCH_PM_ACPI_PMA_CNT_BLK_LO 0x2C
+
+// ACPI Sleep Type
+#define ACPI_SLPTYP_S0 0
+#define ACPI_SLPTYP_S1 1
+#define ACPI_SLPTYP_S3 3
+#define ACPI_SLPTYP_S4 4
+#define ACPI_SLPTYP_S5 5
+
+//#define SATA_BUS_DEV_FUN_FPGA 0x228
+#define SATA_BUS_DEV_FUN ((0x11 << 3) + 0)
+#define FCH_SATA1_BUS 0
+#define FCH_SATA1_DEV 17
+#define FCH_SATA1_FUNC 0
+
+#define FC_BUS_DEV_FUN ((0x11 << 3) + 1)
+#define FCH_XHCI_BUS 0
+#define FCH_XHCI_DEV 16
+#define FCH_XHCI_FUNC 0
+#define USB_XHCI_BUS_DEV_FUN ((FCH_XHCI_DEV << 3) + FCH_XHCI_FUNC)
+#define FCH_XHCI1_BUS 0
+#define FCH_XHCI1_DEV 16
+#define FCH_XHCI1_FUNC 1
+#define USB_XHCI1_BUS_DEV_FUN ((FCH_XHCI1_DEV << 3) + FCH_XHCI1_FUNC)
+#define USB1_OHCI_BUS_DEV_FUN ((0x12 << 3) + 0) // PORT 0-4
+#define FCH_OHCI1_BUS 0
+#define FCH_OHCI1_DEV 18
+#define FCH_OHCI1_FUNC 0
+#define USB2_OHCI_BUS_DEV_FUN ((0x13 << 3) + 0) // PORT 5-9
+#define FCH_OHCI2_BUS 0
+#define FCH_OHCI2_DEV 19
+#define FCH_OHCI2_FUNC 0
+#define USB3_OHCI_BUS_DEV_FUN ((0x16 << 3) + 0) // PORT 10-13
+#define FCH_OHCI3_BUS 0
+#define FCH_OHCI3_DEV 22
+#define FCH_OHCI3_FUNC 0
+#define USB1_EHCI_BUS_DEV_FUN ((0x12 << 3) + 2) // PORT 0-4
+#define FCH_EHCI1_BUS 0
+#define FCH_EHCI1_DEV 18
+#define FCH_EHCI1_FUNC 2
+#define USB2_EHCI_BUS_DEV_FUN ((0x13 << 3) + 2) // PORT 5-9
+#define FCH_EHCI2_BUS 0
+#define FCH_EHCI2_DEV 19
+#define FCH_EHCI2_FUNC 2
+#define USB3_EHCI_BUS_DEV_FUN ((0x16 << 3) + 2) // PORT 10-13
+#define FCH_EHCI3_BUS 0
+#define FCH_EHCI3_DEV 22
+#define FCH_EHCI3_FUNC 2
+#define SMBUS_BUS_DEV_FUN ((0x14 << 3) + 0)
+#define FCH_ISA_BUS 0
+#define FCH_ISA_DEV 20
+#define FCH_ISA_FUNC 0
+#define IDE_BUS_DEV_FUN ((0x14 << 3) + 1)
+#define FCH_IDE_BUS 0
+#define FCH_IDE_DEV 20
+#define FCH_IDE_FUNC 1
+#define AZALIA_BUS_DEV_FUN ((0x14 << 3) + 2)
+#define FCH_AZALIA_BUS 0
+#define FCH_AZALIA_DEV 20
+#define FCH_AZALIA_FUNC 2
+#define LPC_BUS_DEV_FUN ((0x14 << 3) + 3)
+#define FCH_LPC_BUS 0
+#define FCH_LPC_DEV 20
+#define FCH_LPC_FUNC 3
+#define FCH_PCI_BUS 0
+#define FCH_PCI_DEV 20
+#define FCH_PCI_FUNC 4
+#define USB4_OHCI_BUS_DEV_FUN ((0x14 << 3) + 5) // PORT FL0 - FL1
+#define FCH_OHCI4_BUS 0
+#define FCH_OHCI4_DEV 20
+#define FCH_OHCI4_FUNC 5
+//Gigabyte Ethernet Controller
+#define GEC_BUS_DEV_FUN ((0x14 << 3) + 6)
+#define FCH_GBEC_BUS 0
+#define FCH_GBEC_DEV 20
+#define FCH_GBEC_FUNC 6
+
+#define SD_BUS_DEV_FUN ((0x14 << 3) + 7) // SD Controller
+#define SD_PCI_BUS 0
+#define SD_PCI_DEV 20
+#define SD_PCI_FUNC 7
+
+
+#define ACPI_MMIO_BASE 0xFED80000ul
+#define FCH_CFG_BASE 0x000 // DWORD
+#define GPIO_BASE 0x100 // BYTE
+#define SMI_BASE 0x200 // DWORD
+#define PMIO_BASE 0x300 // DWORD
+#define PMIO2_BASE 0x400 // BYTE
+#define BIOS_RAM_BASE 0x500 // BYTE
+#define CMOS_RAM_BASE 0x600 // BYTE
+#define CMOS_BASE 0x700 // BYTE
+#define ASF_BASE 0x900 // DWORD
+#define SMBUS_BASE 0xA00 // DWORD
+#define WATCHDOG_BASE 0xB00 //
+#define HPET_BASE 0xC00 // DWORD
+#define IOMUX_BASE 0xD00 // BYTE
+#define MISC_BASE 0xE00
+#define SERIAL_DEBUG_BASE 0x1000
+#define GFX_DAC_BASE 0x1400
+//#define CEC_BASE 0x1800
+#define XHCI_BASE 0x1C00
+
+
+// Chip type definition
+#define CHIPTYPE_HUDSON2 (1 << 0)
+
+//
+// ROM SIG type definition
+//
+#define NUM_OF_ROMSIG_FILED 0x04
+#define XHCI_FILED_NUM 0x03
+#define ROMSIG_CFG_MASK 0x07
+#define XHCI_BOOT_RAM_OFFSET 0x8000
+#define INSTRUCTION_RAM_SIG 0x55AA
+#define ROMSIG_SIG 0x55AA55AAul
+
+// RegSpace field (AB_INDEX[31:29]
+#define ABCFG 6 // ABCFG
+
+#define GPP_DEV_NUM 21 //
+#define MAX_GPP_PORTS 4
+
+//
+// ABCFG Registers
+//
+#define FCH_ABCFG_REG54 0x54 // MISCCTL_54
+#define FCH_ABCFG_REG58 0x58 // BL RAB CONTROL
+
+
+#define FCH_ABCFG_REG80 0x80 // BL DMA PREFETCH CONTROL
+#define FCH_ABCFG_REG90 0x90 // BIF CONTROL 0
+#define FCH_ABCFG_REG94 0x94 // MSI CONTROL
+#define FCH_ABCFG_REG10054 0x10054ul // AL_ARB_CTL
+#define FCH_ABCFG_REG10090 0x10090ul // BIF CONTROL 0
+
+
+
+//
+// AXINDC Registers
+//
+
+#define FCH_AB_REG04 0x04
+#define FCH_AB_REG40 0x40
+
+//Sata Port Configuration
+#define SIX_PORTS 0
+#define FOUR_PORTS 1
+
+
+
+
+// USB ports
+#define NUM_USB1_PORTS 5
+#define NUM_USB2_PORTS 5
+#define NUM_USB3_PORTS 4
+#define NUM_USB4_PORTS 2
+#define NUM_XHC0_PORTS 2
+#define NUM_XHC1_PORTS 2
+
+
+//
+// USB OHCI Device 0x7807
+// Device 18 (0x12)/Device 19 (0x13)/Device 22 (0x16) Func 0
+// Device 20 (0x14) Func 5 (FL) 0x7809
+//
+#define FCH_OHCI_REG00 0x00 // Device/Vendor ID - R (0x43971002ul)
+#define FCH_OHCI_REG04 0x04 // Command - RW
+#define FCH_OHCI_REG06 0x06 // Status - R
+#define FCH_OHCI_REG08 0x08 // Revision ID/Class Code - R
+#define FCH_OHCI_REG0C 0x0C // Miscellaneous - RW
+#define FCH_OHCI_REG10 0x10 // Bar_OCI - RW
+#define FCH_OHCI_REG2C 0x2C // Subsystem Vendor ID/ Subsystem ID - RW
+#define FCH_OHCI_REG34 0x34 // Capability Pointer - R
+#define FCH_OHCI_REG3C 0x3C // Interrupt Line - RW
+#define FCH_OHCI_REG3D 0x3D // Interrupt Line - RW
+#define FCH_OHCI_REG40 0x40 // Config Timers - RW
+#define FCH_OHCI_REG42 0x42 // Port Disable Control - RW (800)
+#define FCH_OHCI_REG48 0x48 // Port Force Reset - RW (800)
+#define FCH_OHCI_REG58 0x58 // Over Current Control - RW
+#define FCH_OHCI_REG68 0x68 // Over Current PME Enable - RW
+#define FCH_OHCI_REG74 0x74 // Target Timeout Control - RW
+#define FCH_OHCI_REG80 0x80 //
+#define FCH_OHCI_REGD0 0x0D0 // MSI Control - RW
+#define FCH_OHCI_REGD4 0x0D4 // MSI Address - RW
+#define FCH_OHCI_REGD8 0x0D8 // MSI Data - RW
+#define FCH_OHCI_REGE4 0x0E4 // HT MSI Support
+#define FCH_OHCI_REGF0 0x0F0 // Function Level Reset Capability
+#define FCH_OHCI_REGF4 0x0F4 // Function Level Reset Control
+
+#define FCH_OHCI_BAR_REG00 0x00 // cRevision - R
+#define FCH_OHCI_BAR_REG04 0x04 // cControl
+#define FCH_OHCI_BAR_REG08 0x08 // cCommandStatus
+#define FCH_OHCI_BAR_REG0C 0x0C // cInterruptStatus RW
+#define FCH_OHCI_BAR_REG10 0x10 // cInterruptEnable
+#define FCH_OHCI_BAR_REG14 0x14 // cInterruptDisable
+#define FCH_OHCI_BAR_REG18 0x18 // HcCCA
+#define FCH_OHCI_BAR_REG1C 0x1C // cPeriodCurrentED
+#define FCH_OHCI_BAR_REG20 0x20 // HcControleadED
+#define FCH_OHCI_BAR_REG24 0x24 // cControlCurrentED RW
+#define FCH_OHCI_BAR_REG28 0x28 // HcBulkeadED
+#define FCH_OHCI_BAR_REG2C 0x2C // cBulkCurrentED- RW
+#define FCH_OHCI_BAR_REG30 0x30 // HcDoneead
+#define FCH_OHCI_BAR_REG34 0x34 // cFmInterval
+#define FCH_OHCI_BAR_REG38 0x38 // cFmRemaining
+#define FCH_OHCI_BAR_REG3C 0x3C // cFmNumber
+#define FCH_OHCI_BAR_REG40 0x40 // cPeriodicStart
+#define FCH_OHCI_BAR_REG44 0x44 // HcLSThresold
+#define FCH_OHCI_BAR_REG48 0x48 // HcRDescriptorA
+#define FCH_OHCI_BAR_REG4C 0x4C // HcRDescriptorB
+#define FCH_OHCI_BAR_REG50 0x50 // HcRStatus
+#define FCH_OHCI_BAR_REG54 0x54 // HcRhPortStatus (800)
+#define FCH_OHCI_BAR_REG58 0x58 // HcRhPortStatus NPD (800)
+#define FCH_OHCI_BAR_REGF0 0xF0 // OHCI Loop Back feature Support (800)
+
+//
+// USB EHCI Device 0x7808
+// Device 18 (0x12)/Device 19 (0x13)/Device 22 (0x16) Func 2
+//
+#define FCH_EHCI_REG00 0x00 // DEVICE/VENDOR ID - R
+#define FCH_EHCI_REG04 0x04 // Command - RW
+#define FCH_EHCI_REG06 0x06 // Status - R
+#define FCH_EHCI_REG08 0x08 // Revision ID/Class Code - R
+#define FCH_EHCI_REG0C 0x0C // Miscellaneous - RW
+#define FCH_EHCI_REG10 0x10 // BAR - RW
+#define FCH_EHCI_REG2C 0x2C // Subsystem ID/Subsystem Vendor ID - RW
+#define FCH_EHCI_REG34 0x34 // Capability Pointer - R
+#define FCH_EHCI_REG3C 0x3C // Interrupt Line - RW
+#define FCH_EHCI_REG3D 0x3D // Interrupt Line - RW
+#define FCH_EHCI_REG54 0x54 // EHCI Misc Control - RW
+#define FCH_EHCI_REG60 0x60 // SBRN - R
+#define FCH_EHCI_REG61 0x61 // FLADJ - RW
+#define FCH_EHCI_REGC0 0x0C0 // PME control - RW (800)
+#define FCH_EHCI_REGC4 0x0C4 // PME Data /Status - RW (800)
+#define FCH_EHCI_REGD0 0x0D0 // MSI Control - RW
+#define FCH_EHCI_REGD4 0x0D4 // MSI Address - RW
+#define FCH_EHCI_REGD8 0x0D8 // MSI Data - RW
+#define FCH_EHCI_REGF0 0x0F0 // Function Level Reset Capability - R (800)
+#define FCH_EHCI_REGF4 0x0F4 // Function Level Reset Capability - R (800)
+
+#define FCH_EHCI_BAR_REG00 0x00 // CAPLENGT - R
+#define FCH_EHCI_BAR_REG02 0x002
+#define FCH_EHCI_BAR_REG04 0x004
+#define FCH_EHCI_BAR_REG08 0x008
+
+#define FCH_EHCI_BAR_REG20 0x020
+#define FCH_EHCI_BAR_REG24 0x024
+#define FCH_EHCI_BAR_REG28 0x028
+#define FCH_EHCI_BAR_REG2C 0x02C
+#define FCH_EHCI_BAR_REG30 0x030
+#define FCH_EHCI_BAR_REG34 0x034
+#define FCH_EHCI_BAR_REG38 0x038
+#define FCH_EHCI_BAR_REG60 0x060
+#define FCH_EHCI_BAR_REG64 0x064
+#define FCH_EHCI_BAR_REGA4 0x0A4
+#define FCH_EHCI_BAR_REGA8 0x0A8
+#define FCH_EHCI_BAR_REGAC 0x0AC
+#define FCH_EHCI_BAR_REGB4 0x0B4
+#define FCH_EHCI_BAR_REGB8 0x0B8
+#define FCH_EHCI_BAR_REGBC 0x0BC
+#define FCH_EHCI_BAR_REGC0 0x0C0
+#define FCH_EHCI_BAR_REGC4 0x0C4
+#define FCH_EHCI_BAR_REGC8 0x0C8
+#define FCH_EHCI_BAR_REGD0 0x0D0
+#define FCH_EHCI_BAR_REGD4 0x0D4
+
+//
+// USB XHCI Device 0x7812/0x7814
+// Device 16 (0x10) Func 0
+//
+#define FCH_XHCI_REG00 0x00 // DEVICE/VENDOR ID - R
+#define FCH_XHCI_REG04 0x04 // Command - RW
+#define FCH_XHCI_REG10 0x10 // Bar0
+#define FCH_XHCI_REG2C 0x2C // Sub System ID
+#define FCH_XHCI_REG40 0x40 // Index0
+#define FCH_XHCI_REG44 0x44 // Data0
+#define FCH_XHCI_REG48 0x48 // Index1
+#define FCH_XHCI_REG4C 0x4C // Data0
+#define FCH_XHCI_REG54 0x54 // PME Control/Status
+
+//
+// FCH CFG device 0x780B
+// Device 20 (0x14) Func 0
+//
+#define FCH_CFG_REG00 0x000 // VendorID - R
+#define FCH_CFG_REG02 0x002 // DeviceID - R
+#define FCH_CFG_REG04 0x004 // Command- RW
+#define FCH_CFG_REG05 0x005 // Command- RW
+#define FCH_CFG_REG06 0x006 // STATUS- RW
+#define FCH_CFG_REG08 0x008 // Revision ID/Class Code- R
+#define FCH_CFG_REG0A 0x00A //
+#define FCH_CFG_REG0B 0x00B //
+#define FCH_CFG_REG0C 0x00C // Cache Line Size- R
+#define FCH_CFG_REG0D 0x00D // Latency Timer- R
+#define FCH_CFG_REG0E 0x00E // Header Type- R
+#define FCH_CFG_REG0F 0x00F // BIST- R
+#define FCH_CFG_REG10 0x010 // Base Address 0- R
+#define FCH_CFG_REG11 0x011 //;
+#define FCH_CFG_REG12 0x012 //;
+#define FCH_CFG_REG13 0x013 //;
+#define FCH_CFG_REG14 0x014 // Base Address 1- R
+#define FCH_CFG_REG18 0x018 // Base Address 2- R
+#define FCH_CFG_REG1C 0x01C // Base Address 3- R
+#define FCH_CFG_REG20 0x020 // Base Address 4- R
+#define FCH_CFG_REG24 0x024 // Base Address 5- R
+#define FCH_CFG_REG28 0x028 // Cardbus CIS Pointer- R
+#define FCH_CFG_REG2C 0x02C // Subsystem Vendor ID- W
+#define FCH_CFG_REG2E 0x02E // Subsystem ID- W
+#define FCH_CFG_REG30 0x030 // Expansion ROM Base Address - R
+#define FCH_CFG_REG34 0x034 // Capability Pointer - R (800) default changed as 0x00
+#define FCH_CFG_REG3C 0x03C // Interrupt Line - R
+#define FCH_CFG_REG3D 0x03D // Interrupt Pin - R
+#define FCH_CFG_REG3E 0x03E // Min_Gnt - R
+#define FCH_CFG_REG3F 0x03F // Max_Lat - R
+#define FCH_CFG_REG90 0x090 // Smbus Base Address - R
+#define FCH_CFG_REG9C 0x09C // SBResourceMMIO_BASE
+
+//
+// FCH AZALIA device 0x780D
+// Device 20 (0x14) Func 2
+//
+
+#define FCH_AZ_REG00 0x00 // Vendor ID - R
+#define FCH_AZ_REG02 0x02 // Device ID - R/W
+#define FCH_AZ_REG04 0x04 // PCI Command
+#define FCH_AZ_REG06 0x06 // PCI Status - R/W
+#define FCH_AZ_REG08 0x08 // Revision ID
+#define FCH_AZ_REG09 0x09 // Programming Interface
+#define FCH_AZ_REG0A 0x0A // Sub Class Code
+#define FCH_AZ_REG0B 0x0B // Base Class Code
+#define FCH_AZ_REG0C 0x0C // Cache Line Size - R/W
+#define FCH_AZ_REG0D 0x0D // Latency Timer
+#define FCH_AZ_REG0E 0x0E // Header Type
+#define FCH_AZ_REG0F 0x0F // BIST
+#define FCH_AZ_REG10 0x10 // Lower Base Address Register
+#define FCH_AZ_REG14 0x14 // Upper Base Address Register
+#define FCH_AZ_REG2C 0x2C // Subsystem Vendor ID
+#define FCH_AZ_REG34 0x34 // Capabilities Pointer
+#define FCH_AZ_REG3C 0x3C // Interrupt Line
+#define FCH_AZ_REG3D 0x3D // Interrupt Pin
+#define FCH_AZ_REG3E 0x3E // Minimum Grant
+#define FCH_AZ_REG3F 0x3F // Maximum Latency
+#define FCH_AZ_REG40 0x40 // Misc Control 1
+#define FCH_AZ_REG44 0x44 // Interrupt Pin Control Register
+#define FCH_AZ_REG50 0x50 // Power Management Capability ID
+#define FCH_AZ_REG54 0x54 // Power Management Control/Status
+#define FCH_AZ_REG60 0x60 // MSI Capability ID
+#define FCH_AZ_REG64 0x64 // MSI Message Lower Address
+#define FCH_AZ_REG68 0x68 // MSI Message Upper Address
+#define FCH_AZ_REG6C 0x6C // MSI Message Data
+
+#define FCH_AZ_BAR_REG00 0x00 // Global Capabilities - R
+#define FCH_AZ_BAR_REG02 0x02 // Minor Version - R
+#define FCH_AZ_BAR_REG03 0x03 // Major Version - R
+#define FCH_AZ_BAR_REG04 0x04 // Output Payload Capability - R
+#define FCH_AZ_BAR_REG06 0x06 // Input Payload Capability - R
+#define FCH_AZ_BAR_REG08 0x08 // Global Control - R/W
+#define FCH_AZ_BAR_REG0C 0x0C // Wake Enable - R/W
+#define FCH_AZ_BAR_REG0E 0x0E // State Change Status - R/W
+#define FCH_AZ_BAR_REG10 0x10 // Global Status - R/W
+#define FCH_AZ_BAR_REG18 0x18 // Output Stream Payload Capability - R
+#define FCH_AZ_BAR_REG1A 0x1A // Input Stream Payload Capability - R
+#define FCH_AZ_BAR_REG20 0x20 // Interrupt Control - R/W
+#define FCH_AZ_BAR_REG24 0x24 // Interrupt Status - R/W
+#define FCH_AZ_BAR_REG30 0x30 // Wall Clock Counter - R
+#define FCH_AZ_BAR_REG38 0x38 // Stream Synchronization - R/W
+#define FCH_AZ_BAR_REG40 0x40 // CORB Lower Base Address - R/W
+#define FCH_AZ_BAR_REG44 0x44 // CORB Upper Base Address - RW
+#define FCH_AZ_BAR_REG48 0x48 // CORB Write Pointer - R/W
+#define FCH_AZ_BAR_REG4A 0x4A // CORB Read Pointer - R/W
+#define FCH_AZ_BAR_REG4C 0x4C // CORB Control - R/W
+#define FCH_AZ_BAR_REG4D 0x4D // CORB Status - R/W
+#define FCH_AZ_BAR_REG4E 0x4E // CORB Size - R/W
+#define FCH_AZ_BAR_REG50 0x50 // RIRB Lower Base Address - RW
+#define FCH_AZ_BAR_REG54 0x54 // RIRB Upper Address - RW
+#define FCH_AZ_BAR_REG58 0x58 // RIRB Write Pointer - RW
+#define FCH_AZ_BAR_REG5A 0x5A // RIRB Response Interrupt Count - R/W
+#define FCH_AZ_BAR_REG5C 0x5C // RIRB Control - R/W
+#define FCH_AZ_BAR_REG5D 0x5D // RIRB Status - R/W
+#define FCH_AZ_BAR_REG5E 0x5E // RIRB Size - R/W
+#define FCH_AZ_BAR_REG60 0x60 // Immediate Command Output Interface - R/W
+#define FCH_AZ_BAR_REG64 0x64 // Immediate Command Input Interface - R/W
+#define FCH_AZ_BAR_REG68 0x68 // Immediate Command Input Interface - R/W
+#define FCH_AZ_BAR_REG70 0x70 // DMA Position Lower Base Address - R/W
+#define FCH_AZ_BAR_REG74 0x74 // DMA Position Upper Base Address - R/W
+#define FCH_AZ_BAR_REG2030 0x2030 // Wall Clock Counter Alias - R
+
+//
+// FCH LPC Device 0x780E
+// Device 20 (0x14) Func 3
+//
+#define FCH_LPC_REG00 0x00 // VID- R
+#define FCH_LPC_REG02 0x02 // DID- R
+#define FCH_LPC_REG04 0x04 // CMD- RW
+#define FCH_LPC_REG06 0x06 // STATUS- RW
+#define FCH_LPC_REG08 0x08 // Revision ID/Class Code - R
+#define FCH_LPC_REG0C 0x0C // Cache Line Size - R
+#define FCH_LPC_REG0D 0x0D // Latency Timer - R
+#define FCH_LPC_REG0E 0x0E // Header Type - R
+#define FCH_LPC_REG0F 0x0F // BIST- R
+#define FCH_LPC_REG10 0x10 // Base Address Reg 0- RW*
+#define FCH_LPC_REG2C 0x2C // Subsystem ID & Subsystem Vendor ID - Wo/Ro
+#define FCH_LPC_REG34 0x34 // Capabilities Pointer - Ro
+#define FCH_LPC_REG40 0x40 // PCI Control - RW
+#define FCH_LPC_REG44 0x44 // IO Port Decode Enable Register 1- RW
+#define FCH_LPC_REG45 0x45 // IO Port Decode Enable Register 2- RW
+#define FCH_LPC_REG46 0x46 // IO Port Decode Enable Register 3- RW
+#define FCH_LPC_REG47 0x47 // IO Port Decode Enable Register 4- RW
+#define FCH_LPC_REG48 0x48 // IO/Mem Port Decode Enable Register 5- RW
+#define FCH_LPC_REG4C 0x4C // Memory Range Register - RW
+#define FCH_LPC_REG50 0x50 // Rom Protect 0 - RW
+#define FCH_LPC_REG54 0x54 // Rom Protect 1 - RW
+#define FCH_LPC_REG58 0x58 // Rom Protect 2 - RW
+#define FCH_LPC_REG5C 0x5C // Rom Protect 3 - RW
+#define FCH_LPC_REG60 0x60 // PCI Memory Start Address of LPC Target Cycles -
+#define FCH_LPC_REG62 0x62 // PCI Memory End Address of LPC Target Cycles -
+#define FCH_LPC_REG64 0x64 // PCI IO base Address of Wide Generic Port - RW
+#define FCH_LPC_REG68 0x68 // LPC ROM Address Range 1 (Start Address) - RW
+#define FCH_LPC_REG6C 0x6C // LPC ROM Address Range 2 (Start Address)- RW
+#define FCH_LPC_REG74 0x74 // Alternative Wide IO Range Enable- W/R
+#define FCH_LPC_REG7C 0x7C // TPM (trusted plant form module) reg- W/R
+#define FCH_LPC_REGA0 0x0A0 // SPI base address
+#define FCH_LPC_REGA4 0x0A4
+#define FCH_LPC_REGB8 0x0B8
+#define FCH_LPC_REGBA 0x0BA
+#define FCH_LPC_REGBB 0x0BB
+#define FCH_LPC_REGC8 0x0C8
+#define FCH_LPC_REGCC 0x0CC // AutoRomCfg
+#define FCH_LPC_REGD0 0x0D0
+
+//
+// FCH GEC 0x14E4 0x1699
+// Device 20 (0x14) Func 6
+//
+
+//
+// FCH SD
+// Device 20 (0x14) Func 7
+//
+#define SD_PCI_REG10 0x10
+#define SD_PCI_REG2C 0x2C
+#define SD_PCI_REGA4 0xA4
+#define SD_PCI_REGA8 0xA8
+#define SD_PCI_REGB0 0xB0
+#define SD_PCI_REGBC 0xBC
+#define SD_PCI_REGD0 0xD0
+#define SD_PCI_REGF0 0xF0
+#define SD_PCI_REGF4 0xF4
+#define SD_PCI_REGF8 0xF8
+#define SD_PCI_REGFC 0xFC
+#define FCH_SD_BAR_REG28 0x28
+#define SD_CARD_PRESENT BIT0
+#define FCH_SD_BAR_REG2C 0x2C
+#define FCH_SD_FREQUENCY_SLT BIT2
+#define FCH_SD_BAR_REG3C 0x3C
+#define FCH_SD_1_8V BIT3
+
+//
+// FCH MMIO Base (SMI)
+// offset : 0x200
+//
+#define FCH_SMI_REG00 0x00 // EventStatus
+#define FCH_SMI_REG04 0x04 // EventEnable
+#define FCH_SMI_REG08 0x08 // SciTrig
+#define FCH_SMI_REG0C 0x0C // SciLevl
+#define FCH_SMI_REG10 0x10 // SmiSciStatus
+#define FCH_SMI_REG14 0x14 // SmiSciEn
+#define FCH_SMI_REG18 0x18 // ForceSciEn
+#define FCH_SMI_REG1C 0x1C // SciRwData
+#define FCH_SMI_REG3C 0x3C // DataErrorStatus
+#define FCH_SMI_REG20 0x20 // SciS0En
+#define FCH_SMI_Gevent0 0x40 // SciMap0
+#define FCH_SMI_Gevent1 0x41 // SciMap1
+#define FCH_SMI_Gevent2 0x42 // SciMap2
+#define FCH_SMI_Gevent3 0x43 // SciMap3
+#define FCH_SMI_Gevent4 0x44 // SciMap4
+#define FCH_SMI_Gevent5 0x45 // SciMap5
+#define FCH_SMI_Gevent6 0x46 // SciMap6
+#define FCH_SMI_Gevent7 0x47 // SciMap7
+#define FCH_SMI_Gevent8 0x48 // SciMap8
+#define FCH_SMI_Gevent9 0x49 // SciMap9
+#define FCH_SMI_Gevent10 0x4A // SciMap10
+#define FCH_SMI_Gevent11 0x4B // SciMap11
+#define FCH_SMI_Gevent12 0x4C // SciMap12
+#define FCH_SMI_Gevent13 0x4D // SciMap13
+#define FCH_SMI_Gevent14 0x4E // SciMap14
+#define FCH_SMI_Gevent15 0x4F // SciMap15
+#define FCH_SMI_Gevent16 0x50 // SciMap16
+#define FCH_SMI_Gevent17 0x51 // SciMap17
+#define FCH_SMI_Gevent18 0x52 // SciMap18
+#define FCH_SMI_Gevent19 0x53 // SciMap19
+#define FCH_SMI_Gevent20 0x54 // SciMap20
+#define FCH_SMI_Gevent21 0x55 // SciMap21
+#define FCH_SMI_Gevent22 0x56 // SciMap22
+#define FCH_SMI_Gevent23 0x57 // SciMap23
+#define FCH_SMI_Usbwakup0 0x58 // SciMap24
+#define FCH_SMI_Usbwakup1 0x59 // SciMap25
+#define FCH_SMI_Usbwakup2 0x5A // SciMap26
+#define FCH_SMI_Usbwakup3 0x5B // SciMap27
+#define FCH_SMI_SBGppPme0 0x5C // SciMap28
+#define FCH_SMI_SBGppPme1 0x5D // SciMap29
+#define FCH_SMI_SBGppPme2 0x5E // SciMap30
+#define FCH_SMI_SBGppPme3 0x5F // SciMap31
+#define FCH_SMI_SBGppHp0 0x60 // SciMap32
+#define FCH_SMI_SBGppHp1 0x61 // SciMap33
+#define FCH_SMI_SBGppHp2 0x62 // SciMap34
+#define FCH_SMI_SBGppHp3 0x63 // SciMap35
+#define FCH_SMI_AzaliaPme 0x64 // SciMap36
+#define FCH_SMI_SataGevent0 0x65 // SciMap37
+#define FCH_SMI_SataGevent1 0x66 // SciMap38
+#define FCH_SMI_GecPme 0x67 // SciMap39
+#define FCH_SMI_IMCGevent0 0x68 // SciMap40
+#define FCH_SMI_IMCGevent1 0x69 // SciMap41
+#define FCH_SMI_CIRPme 0x6A // SciMap42
+#define FCH_SMI_WakePinGevent 0x6B // SciMap43
+#define FCH_SMI_FanThGevent 0x6C // SciMap44 //FanThermalGevent
+#define FCH_SMI_ASFMasterIntr 0x6D // SciMap45
+#define FCH_SMI_ASFSlaveIntr 0x6E // SciMap46
+#define FCH_SMI_SMBUS0 0x6F // SciMap47
+#define FCH_SMI_TWARN 0x70 // SciMap48
+#define FCH_SMI_TMI 0x71 // SciMap49 // TrafficMonitorIntr
+#define FCH_SMI_iLLB 0x72 // SciMap50
+#define FCH_SMI_PowerButton 0x73 // SciMap51
+#define FCH_SMI_ProcHot 0x74 // SciMap52
+#define FCH_SMI_APUHwAssertion 0x75 // SciMap53
+#define FCH_SMI_APUSciAssertion 0x76 // SciMap54
+#define FCH_SMI_RAS 0x77 // SciMap55
+#define FCH_SMI_xHC0Pme 0x78 // SciMap56
+#define FCH_SMI_xHC1Pme 0x79 // SciMap57
+
+// Empty from 0x72-0x7F
+//#Define FCH_SMI_REG7C 0x7F // SciMap63 ***
+
+#define FCH_SMI_REG80 0x80 // SmiStatus0
+#define FCH_SMI_REG84 0x84 // SmiStatus1
+#define FCH_SMI_REG88 0x88 // SmiStatus2
+#define FCH_SMI_REG8C 0x8C // SmiStatus3
+#define FCH_SMI_REG90 0x90 // SmiStatus4
+#define FCH_SMI_REG94 0x94 // SmiPointer
+#define FCH_SMI_REG96 0x96 // SmiTimer
+#define FCH_SMI_REG98 0x98 // SmiTrig
+#define FCH_SMI_REG9C 0x9C // SmiTrig
+#define FCH_SMI_REGA0 0xA0
+#define FCH_SMI_REGA1 0xA1
+#define FCH_SMI_REGA2 0xA2
+#define FCH_SMI_REGA3 0xA3
+#define FCH_SMI_REGA4 0xA4
+#define FCH_SMI_REGA5 0xA5
+#define FCH_SMI_REGA6 0xA6
+#define FCH_SMI_REGA7 0xA7
+#define FCH_SMI_REGA8 0xA8
+#define FCH_SMI_REGA9 0xA9
+#define FCH_SMI_REGAA 0xAA
+#define FCH_SMI_REGAB 0xAB
+#define FCH_SMI_REGAC 0xAC
+#define FCH_SMI_REGAD 0xAD
+#define FCH_SMI_REGAE 0xAE
+#define FCH_SMI_REGAF 0xAF
+#define FCH_SMI_REGB0 0xB0
+#define FCH_SMI_REGB1 0xB1
+#define FCH_SMI_REGB2 0xB2
+#define FCH_SMI_REGB3 0xB3
+#define FCH_SMI_REGB4 0xB4
+#define FCH_SMI_REGB5 0xB5
+#define FCH_SMI_REGB6 0xB6
+#define FCH_SMI_REGB7 0xB7
+#define FCH_SMI_REGB8 0xB8
+#define FCH_SMI_REGB9 0xB9
+#define FCH_SMI_REGBA 0xBA
+#define FCH_SMI_REGBB 0xBB
+#define FCH_SMI_REGBC 0xBC
+#define FCH_SMI_REGBD 0xBD
+#define FCH_SMI_REGBE 0xBE
+#define FCH_SMI_REGBF 0xBF
+#define FCH_SMI_REGC0 0xC0
+#define FCH_SMI_REGC1 0xC1
+#define FCH_SMI_REGC2 0xC2
+#define FCH_SMI_REGC3 0xC3
+#define FCH_SMI_REGC4 0xC4
+#define FCH_SMI_REGC5 0xC5
+#define FCH_SMI_REGC6 0xC6
+#define FCH_SMI_REGC7 0xC7
+#define FCH_SMI_REGC8 0xC8
+#define FCH_SMI_REGCA 0xCA // IoTrapping1
+#define FCH_SMI_REGCC 0xCC // IoTrapping2
+#define FCH_SMI_REGCE 0xCE // IoTrapping3
+#define FCH_SMI_TRAPPING_WRITE 0x01
+#define FCH_SMI_REGD0 0xD0 // MemTrapping0
+#define FCH_SMI_REGD4 0xD4 // MemRdOvrData0
+#define FCH_SMI_REGD8 0xD8 // MemTrapping1
+#define FCH_SMI_REGDC 0xDC // MemRdOvrData1
+#define FCH_SMI_REGE0 0xE0 // MemTrapping2
+#define FCH_SMI_REGE4 0xE4 // MemRdOvrData2
+#define FCH_SMI_REGE8 0xE8 // MemTrapping3
+#define FCH_SMI_REGEC 0xEC // MemRdOvrData3
+#define FCH_SMI_REGF0 0xF0 // CfgTrapping0
+#define FCH_SMI_REGF4 0xF4 // CfgTrapping1
+#define FCH_SMI_REGF8 0xF8 // CfgTrapping2
+#define FCH_SMI_REGFC 0xFC // CfgTrapping3
+
+//
+// FCH MMIO Base (PMIO)
+// offset : 0x300
+//
+#define FCH_PMIOA_REG00 0x00
+#define FCH_PMIOA_REG04 0x04
+#define FCH_PMIOA_REG08 0x08
+#define FCH_PMIOA_REG0C 0x0C
+#define FCH_PMIOA_REG10 0x10
+#define FCH_PMIOA_REG14 0x14
+#define FCH_PMIOA_REG20 0x20
+#define FCH_PMIOA_REG24 0x24
+#define FCH_PMIOA_REG28 0x28
+#define FCH_PMIOA_REG2C 0x2C
+#define FCH_PMIOA_REG2E 0x2E
+#define FCH_PMIOA_REG34 0x34
+#define FCH_PMIOA_REG3C 0x3C
+#define FCH_PMIOA_REG44 0x44
+#define FCH_PMIOA_REG48 0x48
+#define FCH_PMIOA_REG4C 0x4C
+#define FCH_PMIOA_REG50 0x50
+#define FCH_PMIOA_REG54 0x54
+#define FCH_PMIOA_REG56 0x56
+#define FCH_PMIOA_REG58 0x58
+#define FCH_PMIOA_REG59 0x59
+#define FCH_PMIOA_REG5B 0x5B
+#define FCH_PMIOA_REG5C 0x5C
+#define FCH_PMIOA_REG5E 0x5E
+#define FCH_PMIOA_REG5F 0x5F
+#define FCH_PMIOA_REG60 0x60
+#define FCH_PMIOA_REG62 0x62
+#define FCH_PMIOA_REG64 0x64
+#define FCH_PMIOA_REG66 0x66
+#define FCH_PMIOA_REG68 0x68
+#define FCH_PMIOA_REG6A 0x6A
+#define FCH_PMIOA_REG6C 0x6C
+#define FCH_PMIOA_REG6E 0x6E
+#define FCH_PMIOA_REG74 0x74
+#define FCH_PMIOA_REG78 0x78
+#define FCH_PMIOA_REG7A 0x7A
+#define FCH_PMIOA_REG7C 0x7C
+#define FCH_PMIOA_REG7E 0x7E
+#define FCH_PMIOA_REG7F 0x7F
+#define FCH_PMIOA_REG84 0x84
+#define FCH_PMIOA_REG88 0x88
+#define FCH_PMIOA_REG8C 0x8C
+#define FCH_PMIOA_REG8E 0x8E
+#define FCH_PMIOA_REG94 0x94
+#define FCH_PMIOA_REG98 0x98
+#define FCH_PMIOA_REG9C 0x9C
+#define FCH_PMIOA_REG9D 0x9D
+#define FCH_PMIOA_REGA0 0xA0
+#define FCH_PMIOA_REGA4 0xA4
+#define FCH_PMIOA_REGA8 0xA8
+#define FCH_PMIOA_REGAA 0xAA
+#define FCH_PMIOA_REGAC 0xAC
+#define FCH_PMIOA_REGAE 0xAE
+#define FCH_PMIOA_REGB0 0xB0
+#define FCH_PMIOA_REGB4 0xB4
+#define FCH_PMIOA_REGB8 0xB8
+#define FCH_PMIOA_REGB9 0xB9
+#define FCH_PMIOA_REGBA 0xBA
+#define FCH_PMIOA_REGBB 0xBB
+#define FCH_PMIOA_REGBC 0xBC
+#define FCH_PMIOA_REGBE 0xBE
+#define FCH_PMIOA_REGC0 0xC0
+#define FCH_PMIOA_REGC2 0xC2
+#define FCH_PMIOA_REGC4 0xC4
+#define FCH_PMIOA_REGC5 0xC5
+#define FCH_PMIOA_REGC8 0xC8
+#define FCH_PMIOA_REGCC 0xCC
+#define FCH_PMIOA_REGD0 0xD0
+#define FCH_PMIOA_REGD2 0xD2
+#define FCH_PMIOA_REGD3 0xD3
+#define FCH_PMIOA_REGD6 0xD6
+#define FCH_PMIOA_REGD7 0xD7
+#define FCH_PMIOA_REGE0 0xE0
+#define FCH_PMIOA_REGE8 0xE8
+#define FCH_PMIOA_REGEB 0xEB
+#define FCH_PMIOA_REGEC 0xEC
+#define FCH_PMIOA_REGED 0xED
+#define FCH_PMIOA_REGEE 0xEE
+#define FCH_PMIOA_REGEF 0xEF
+#define FCH_PMIOA_REGF0 0xF0
+#define FCH_PMIOA_REGF2 0xF2
+#define FCH_PMIOA_REGF4 0xF4
+#define FCH_PMIOA_REGF8 0xF8
+
+//
+// FCH MMIO Base (PMIO2)
+// offset : 0x400
+//
+#define FCH_PMIO2_REG00 0x00
+#define FCH_PMIO2_REG01 0x01
+#define FCH_PMIO2_REG02 0x02
+#define FCH_PMIO2_REG03 0x03
+#define FCH_PMIO2_REG04 0x04
+
+
+#define FCH_PMIO2_REG63 0x63
+#define FCH_PMIO2_REG69 0x69
+
+#define FCH_PMIO2_REG92 0x92
+
+
+
+//
+// FCH MMIO Base (GPIO/IoMux)
+// offset : 0x100/0xD00
+//
+/*
+GPIO from 0 ~ 67, (GEVENT 0-23) 128 ~ 150, 160 ~ 226.
+*/
+#define FCH_GPIO_REG00 0x00
+#define FCH_GPIO_REG06 0x06
+#define FCH_GPIO_REG09 0x09
+#define FCH_GPIO_REG10 0x0A
+#define FCH_GPIO_REG17 0x11
+#define FCH_GPIO_REG21 0x15
+#define FCH_GPIO_REG28 0x1C
+#define FCH_GPIO_REG32 0x20
+#define FCH_GPIO_REG33 0x21
+#define FCH_GPIO_REG34 0x22
+#define FCH_GPIO_REG35 0x23
+#define FCH_GPIO_REG36 0x24
+#define FCH_GPIO_REG37 0x25
+#define FCH_GPIO_REG38 0x26
+#define FCH_GPIO_REG39 0x27
+#define FCH_GPIO_REG40 0x28
+#define FCH_GPIO_REG41 0x29
+#define FCH_GPIO_REG42 0x2A
+#define FCH_GPIO_REG43 0x2B
+#define FCH_GPIO_REG44 0x2C
+#define FCH_GPIO_REG45 0x2D
+#define FCH_GPIO_REG46 0x2E
+#define FCH_GPIO_REG47 0x2F
+#define FCH_GPIO_REG48 0x30
+#define FCH_GPIO_REG49 0x31
+#define FCH_GPIO_REG50 0x32
+#define FCH_GPIO_REG51 0x33
+#define FCH_GPIO_REG52 0x34
+#define FCH_GPIO_REG53 0x35
+#define FCH_GPIO_REG54 0x36
+#define FCH_GPIO_REG55 0x37
+#define FCH_GPIO_REG56 0x38
+#define FCH_GPIO_REG57 0x39
+#define FCH_GPIO_REG58 0x3A
+#define FCH_GPIO_REG59 0x3B
+#define FCH_GPIO_REG60 0x3C
+#define FCH_GPIO_REG61 0x3D
+#define FCH_GPIO_REG62 0x3E
+#define FCH_GPIO_REG63 0x3F
+#define FCH_GPIO_REG64 0x40
+#define FCH_GPIO_REG65 0x41
+#define FCH_GPIO_REG66 0x42
+#define FCH_GPIO_REG67 0x43
+#define FCH_GPIO_REG68 0x44
+#define FCH_GPIO_REG69 0x45
+#define FCH_GPIO_REG70 0x46
+#define FCH_GPIO_REG71 0x47
+#define FCH_GPIO_REG72 0x48
+#define FCH_GPIO_REG73 0x49
+#define FCH_GPIO_REG74 0x4A
+#define FCH_GPIO_REG75 0x4B
+#define FCH_GPIO_REG76 0x4C
+#define FCH_GPIO_REG77 0x4D
+#define FCH_GPIO_REG78 0x4E
+#define FCH_GPIO_REG79 0x4F
+#define FCH_GPIO_REG80 0x50
+
+// S5-DOMAIN GPIO
+
+//
+// FCH MMIO Base (SMBUS)
+// offset : 0xA00
+//
+#define FCH_SMBUS_REG12 0x12 // I2CbusConfig
+
+//
+// FCH MMIO Base (MISC)
+// offset : 0xE00
+//
+#define FCH_MISC_REG00 0x00 // ClkCntrl0
+/*
+FCH_MISC_REG00 EQU 000h
+ ClkCntrl0 EQU 0FFFFFFFFh
+*/
+#define FCH_MISC_REG04 0x04 // ClkCntrl1
+/*
+FCH_MISC_REG04 EQU 004h
+ ClkCntrl1 EQU 0FFFFFFFFh
+*/
+#define FCH_MISC_REG08 0x08 // ClkCntrl2
+/*
+FCH_MISC_REG08 EQU 008h
+ ClkCntrl2 EQU 0FFFFFFFFh
+*/
+#define FCH_MISC_REG0C 0x0C // ClkCntrl3
+/*
+FCH_MISC_REG0C EQU 00Ch
+ ClkCntrl3 EQU 0FFFFFFFFh
+*/
+#define FCH_MISC_REG10 0x10 // ClkCntrl4
+/*
+FCH_MISC_REG10 EQU 010h
+ ClkCntrl4 EQU 0FFFFFFFFh
+*/
+#define FCH_MISC_REG14 0x14 // ClkCntrl5
+/*
+FCH_MISC_REG14 EQU 014h
+ ClkCntrl5 EQU 0FFFFFFFFh
+*/
+#define FCH_MISC_REG18 0x18 // ClkCntrl6
+/*
+FCH_MISC_REG18 EQU 018h
+ ClkCntrl6 EQU 0FFFFFFFFh
+*/
+#define FCH_MISC_REG1C 0x1C
+#define FCH_MISC_REG30 0x30 // OscFreqCounter
+/*
+FCH_MISC_REG30 EQU 030h
+ OscCounter EQU 0FFFFFFFFh ; The 32bit register shows the number of OSC clock per second.
+*/
+#define FCH_MISC_REG34 0x34 // HpetClkPeriod
+/*
+FCH_MISC_REG34 EQU 034h
+ HpetClkPeriod EQU 0FFFFFFFFh ; default - 0x429B17Eh (14.31818M).
+*/
+#define FCH_MISC_REG28 0x28 // ClkDrvSth2
+#define FCH_MISC_REG2C 0x2C
+#define FCH_MISC_REG40 0x40 // MiscCntrl for clock only
+#define FCH_MISC_REG50 0x50 //
+#define FCH_MISC_REG6C 0x6C
+/*
+FCH_MISC_REG40 EQU 040h
+*/
+
+#define FCH_MISC_REG80 0x80
+
+#define ChipSysNotUseFWHRom 0x0001 // EcPwm3 pad
+#define ChipSysNotUseLpcRom 0x0002 // Inverted version from EcPwm2 pad (default - 1)
+ // Note: Both EcPwm3 and EcPwm2 straps pins are used to select boot ROM type.
+#define ChipSysEcEnable 0x0004 // Enable Embedded Controller (EC)
+#define ChipSysBootFailTmrEn 0x0008 // Enable Watchdog function
+#define ChipSysIntClkGen 0x0010 // Select 25Mhz crystal clock or 100Mhz PCI-E clock **
+
+/*
+FCH_MISC_REG84 EQU 084h
+ Override FWHDisableStrap EQU BIT0 ; Override FWHDiableStrap value from external pin.
+ Override UseLpcRomStrap EQU BIT1 ; Override UseLpcRomStrap value from external pin.
+ Override EcEnableStrap EQU BIT2 ; Override EcEnableStrap value from external pin.
+ Override BootFailTmrEnStrap EQU BIT3 ; Override BootFailTmrEnStrap value from external pin.
+ Override DefaultModeStrap EQU BIT5 ; Override DefaultModeStrap value from external pin.
+ Override I2CRomStrap EQU BIT7 ; Override I2CRomStrap value from external pin.
+ Override ILAAutorunEnBStrap EQU BIT8 ; Override ILAAutorunEnBStrap value from external pin.
+ Override FcPllBypStrap EQU BIT9 ; Override FcPllBypStrap value from external pin.
+ Override PciPllBypStrap EQU BIT10 ; Override PciPllBypStrap value from external pin.
+ Override ShortResetStrap EQU BIT11 ; Override ShortResetStrap value from external pin.
+ Override FastBif2ClkStrap EQU BIT13 ; Override FastBif2ClkStrap value from external pin
+ PciRomBootStrap EQU BIT15 ; Override PCI Rom Boot Strap value from external pin
+ BlinkSlowModestrap EQU BIT16 ; Override Blink Slow mode (100Mhz) from external pin
+ ClkGenStrap EQU BIT17 ; Override CLKGEN from external pin.
+ BIF_GEN2_COMPL_Strap EQU BIT18 ; Override BIF_ GEN2_COMPLIANCE strap from external pin.
+ StrapOverrideEn EQU BIT31 ; Enable override strapping feature.
+*/
+#define FCH_MISC_REGC0 0xC0 // CPU_Pstate0
+/*
+FCH_MISC_REGC0 EQU 0C0h
+ Core0_PState EQU BIT0+BIT1+BIT2 ; 000: P0 001: P1 010: P2 011: P3 100: P4 101: P5 110: P6 111: P7
+ Core1_PState EQU BIT4+BIT5+BIT6
+ Core2_PState EQU BIT8+BIT9+BIT10
+ Core3_PState EQU BIT12+BIT13+BIT14
+ Core4_PState EQU BIT16++BIT17+BIT18
+ Core5_PState EQU BIT20+BIT21+BIT22
+ Core6_PState EQU BIT24+BIT25+BIT26
+ Core7_PState EQU BIT28+BIT29+BIT30
+*/
+#define FCH_MISC_REGC4 0xC4 // CPU_Pstate1
+/*
+FCH_MISC_REGC4 EQU 0C4h
+ Core8_PState EQU BIT0+BIT1+BIT2 ; 000: P0 001: P1 010: P2 011: P3 100: P4 101: P5 110: P6 111: P7
+ Core9_PState EQU BIT4+BIT5+BIT6
+ Core10_PState EQU BIT8+BIT9+BIT10
+ Core11_PState EQU BIT12+BIT13+BIT14
+ Core12_PState EQU BIT16++BIT17+BIT18
+ Core13_PState EQU BIT20+BIT21+BIT22
+ Core14_PState EQU BIT24+BIT25+BIT26
+ Core15_PState EQU BIT28+BIT29+BIT30
+*/
+#define FCH_MISC_REGD0 0xD0 // CPU_Cstate0
+/*
+FCH_MISC_REGD0 EQU 0D0h
+ Core0_CState EQU BIT0+BIT1+BIT2 ; 000: C0 001: C1 010: C2 011: C3 100: C4 101: C5 110: C6 111: C7
+ Core1_CState EQU BIT4+BIT5+BIT6
+ Core2_CState EQU BIT8+BIT9+BIT10
+ Core3_CState EQU BIT12+BIT13+BIT14
+ Core4_CState EQU BIT16++BIT17+BIT18
+ Core5_CState EQU BIT20+BIT21+BIT22
+ Core6_CState EQU BIT24+BIT25+BIT26
+ Core7_CState EQU BIT28+BIT29+BIT30
+*/
+#define FCH_MISC_REGD4 0xD4 // CPU_Cstate1
+/*
+FCH_MISC_REGD4 EQU 0D4h
+ Core8_CState EQU BIT0+BIT1+BIT2 ; 000: C0 001: C1 010: C2 011: C3 100: C4 101: C5 110: C6 111: C7
+ Core9_CState EQU BIT4+BIT5+BIT6
+ Core10_CState EQU BIT8+BIT9+BIT10
+ Core11_CState EQU BIT12+BIT13+BIT14
+ Core12_CState EQU BIT16++BIT17+BIT18
+ Core13_CState EQU BIT20+BIT21+BIT22
+ Core14_CState EQU BIT24+BIT25+BIT26
+ Core15_CState EQU BIT28+BIT29+BIT30
+*/
+#define FCH_MISC_REGF0 0xF0 // SataPortSts
+/*
+FCH_MISC_REGF0 EQU 0F0h
+ Port0Sts EQU BIT0 ; The selected status of Port 0.
+ Port1Sts EQU BIT1 ; The selected status of Port 1
+ Port2Sts EQU BIT2 ; The selected status of Port 2.
+ Port3Sts EQU BIT3 ; The selected status of Port 3
+ Port4Sts EQU BIT4 ; The selected status of Port 4.
+ Port5Sts EQU BIT5 ; The selected status of Port 5
+ SataPortSel EQU BIT24+BIT25 ; 00 - Select "led" for Port 0 to 5
+ ; 01 - Select "delete" for Port 0 to 5
+ ; 10 - Select "err" for Port 0 to 5
+ ; 11 - Select "led" for Port 0 to 5
+*/
+
+//
+// FCH MMIO Base (SERIAL_DEBUG_BASE)
+// offset : 0x1000
+//
+
+#define FCH_RTC_REG00 0x00 // Seconds - RW
+#define FCH_RTC_REG01 0x01 // Seconds Alarm - RW
+#define FCH_RTC_REG02 0x02 // Minutes - RW
+#define FCH_RTC_REG03 0x03 // Minutes Alarm - RW
+#define FCH_RTC_REG04 0x04 // ours - RW
+#define FCH_RTC_REG05 0x05 // ours Alarm- RW
+#define FCH_RTC_REG06 0x06 // Day of Week - RW
+#define FCH_RTC_REG07 0x07 // Date of Mont - RW
+#define FCH_RTC_REG08 0x08 // Mont - RW
+#define FCH_RTC_REG09 0x09 // Year - RW
+#define FCH_RTC_REG0A 0x0A // Register A - RW
+#define FCH_RTC_REG0B 0x0B // Register B - RW
+#define FCH_RTC_REG0C 0x0C // Register C - R
+#define FCH_RTC_REG0D 0x0D // DateAlarm - RW
+#define FCH_RTC_REG32 0x32 // AltCentury - RW
+#define FCH_RTC_REG48 0x48 // Century - RW
+#define FCH_RTC_REG50 0x50 // Extended RAM Address Port - RW
+#define FCH_RTC_REG53 0x53 // Extended RAM Data Port - RW
+#define FCH_RTC_REG7E 0x7E // RTC Time Clear - RW
+#define FCH_RTC_REG7F 0x7F // RTC RAM Enable - RW
+
+
+#define FCH_IOMAP_REG00 0x000 // Dma_C 0
+#define FCH_IOMAP_REG02 0x002 // Dma_C 1
+#define FCH_IOMAP_REG04 0x004 // Dma_C 2
+#define FCH_IOMAP_REG06 0x006 // Dma_C 3
+#define FCH_IOMAP_REG08 0x008 // Dma_Status
+#define FCH_IOMAP_REG09 0x009 // Dma_WriteRest
+#define FCH_IOMAP_REG0A 0x00A // Dma_WriteMask
+#define FCH_IOMAP_REG0B 0x00B // Dma_WriteMode
+#define FCH_IOMAP_REG0C 0x00C // Dma_Clear
+#define FCH_IOMAP_REG0D 0x00D // Dma_MasterClr
+#define FCH_IOMAP_REG0E 0x00E // Dma_ClrMask
+#define FCH_IOMAP_REG0F 0x00F // Dma_AllMask
+#define FCH_IOMAP_REG20 0x020 // IntrCntrlReg1
+#define FCH_IOMAP_REG21 0x021 // IntrCntrlReg2
+#define FCH_IOMAP_REG40 0x040 // TimerC0
+#define FCH_IOMAP_REG41 0x041 // TimerC1
+#define FCH_IOMAP_REG42 0x042 // TimerC2
+#define FCH_IOMAP_REG43 0x043 // Tmr1CntrlWord
+#define FCH_IOMAP_REG61 0x061 // Nmi_Status
+#define FCH_IOMAP_REG70 0x070 // Nmi_Enable
+#define FCH_IOMAP_REG71 0x071 // RtcDataPort
+#define FCH_IOMAP_REG72 0x072 // AlternatRtcAddrPort
+#define FCH_IOMAP_REG73 0x073 // AlternatRtcDataPort
+#define FCH_IOMAP_REG80 0x080 // Dma_Page_Reserved0
+#define FCH_IOMAP_REG81 0x081 // Dma_PageC2
+#define FCH_IOMAP_REG82 0x082 // Dma_PageC3
+#define FCH_IOMAP_REG83 0x083 // Dma_PageC1
+#define FCH_IOMAP_REG84 0x084 // Dma_Page_Reserved1
+#define FCH_IOMAP_REG85 0x085 // Dma_Page_Reserved2
+#define FCH_IOMAP_REG86 0x086 // Dma_Page_Reserved3
+#define FCH_IOMAP_REG87 0x087 // Dma_PageC0
+#define FCH_IOMAP_REG88 0x088 // Dma_Page_Reserved4
+#define FCH_IOMAP_REG89 0x089 // Dma_PageC6
+#define FCH_IOMAP_REG8A 0x08A // Dma_PageC7
+#define FCH_IOMAP_REG8B 0x08B // Dma_PageC5
+#define FCH_IOMAP_REG8C 0x08C // Dma_Page_Reserved5
+#define FCH_IOMAP_REG8D 0x08D // Dma_Page_Reserved6
+#define FCH_IOMAP_REG8E 0x08E // Dma_Page_Reserved7
+#define FCH_IOMAP_REG8F 0x08F // Dma_Refres
+#define FCH_IOMAP_REG92 0x092 // FastInit
+#define FCH_IOMAP_REGA0 0x0A0 // IntrCntrl2Reg1
+#define FCH_IOMAP_REGA1 0x0A1 // IntrCntrl2Reg2
+#define FCH_IOMAP_REGC0 0x0C0 // Dma2_C4Addr
+#define FCH_IOMAP_REGC2 0x0C2 // Dma2_C4Cnt
+#define FCH_IOMAP_REGC4 0x0C4 // Dma2_C5Addr
+#define FCH_IOMAP_REGC6 0x0C6 // Dma2_C5Cnt
+#define FCH_IOMAP_REGC8 0x0C8 // Dma2_C6Addr
+#define FCH_IOMAP_REGCA 0x0CA // Dma2_C6Cnt
+#define FCH_IOMAP_REGCC 0x0CC // Dma2_C7Addr
+#define FCH_IOMAP_REGCE 0x0CE // Dma2_C7Cnt
+#define FCH_IOMAP_REGD0 0x0D0 // Dma_Status
+#define FCH_IOMAP_REGD2 0x0D2 // Dma_WriteRest
+#define FCH_IOMAP_REGD4 0x0D4 // Dma_WriteMask
+#define FCH_IOMAP_REGD6 0x0D6 // Dma_WriteMode
+#define FCH_IOMAP_REGD8 0x0D8 // Dma_Clear
+#define FCH_IOMAP_REGDA 0x0DA // Dma_Clear
+#define FCH_IOMAP_REGDC 0x0DC // Dma_ClrMask
+#define FCH_IOMAP_REGDE 0x0DE // Dma_ClrMask
+#define FCH_IOMAP_REGF0 0x0F0 // NCP_Error
+#define FCH_IOMAP_REGC00 0x0C00 // Pci_Intr_Index
+#define FCH_IOMAP_REGC01 0x0C01 // Pci_Intr_Data
+#define FCH_IOMAP_REGC14 0x0C14 // Pci_Error
+#define FCH_IOMAP_REGCD0 0x0CD0 // PMio2_Index
+#define FCH_IOMAP_REGCD1 0x0CD1 // PMio2_Data
+#define FCH_IOMAP_REGCD4 0x0CD4 // BIOSRAM_Index
+#define FCH_IOMAP_REGCD5 0x0CD5 // BIOSRAM_Data
+#define FCH_IOMAP_REGCD6 0x0CD6 // PM_Index
+#define FCH_IOMAP_REGCD7 0x0CD7 // PM_Data
+#define FCH_IOMAP_REGCF9 0x0CF9 // CF9Rst reg
+
+#define FCH_IRQ_INTA 0x00 // INTA#
+#define FCH_IRQ_INTB 0x01 // INTB#
+#define FCH_IRQ_INTC 0x02 // INTC#
+#define FCH_IRQ_INTD 0x03 // INTD#
+#define FCH_IRQ_INTE 0x04 // INTE#
+#define FCH_IRQ_INTF 0x05 // INTF#
+#define FCH_IRQ_INTG 0x06 // INTG#
+#define FCH_IRQ_INTH 0x07 // INTH#
+#define FCH_IRQ_SCI 0x10 // SCI
+#define FCH_IRQ_SMBUS0 0x11 // SMBUS0
+#define FCH_IRQ_ASF 0x12 // ASF
+#define FCH_IRQ_HDAUDIO 0x13 // HD Audio
+#define FCH_IRQ_FC 0x14 // FC
+#define FCH_IRQ_GEC 0x15 // GEC
+#define FCH_IRQ_SD 0x17 // SD
+#define FCH_IRQ_IMCINT0 0x20 // IMC INT0
+#define FCH_IRQ_IMCINT1 0x21 // IMC INT1
+#define FCH_IRQ_IMCINT2 0x22 // IMC INT2
+#define FCH_IRQ_IMCINT3 0x23 // IMC INT3
+#define FCH_IRQ_IMCINT4 0x24 // IMC INT4
+#define FCH_IRQ_IMCINT5 0x25 // IMC INT5
+#define FCH_IRQ_USB18INTA 0x30 // Dev 18 (USB) INTA#
+#define FCH_IRQ_USB18INTB 0x31 // Dev 18 (USB) INTB#
+#define FCH_IRQ_USB19INTA 0x32 // Dev 19 (USB) INTA#
+#define FCH_IRQ_USB19INTB 0x33 // Dev 19 (USB) INTB#
+#define FCH_IRQ_USB22INTA 0x34 // Dev 22 (USB) INTA#
+#define FCH_IRQ_USB22INTB 0x35 // Dev 22 (USB) INTB#
+#define FCH_IRQ_USB20INTC 0x36 // Dev 20 (USB) INTC#
+#define FCH_IRQ_IDE 0x40 // IDE pci interrupt
+#define FCH_IRQ_SATA 0x41 // SATA pci interrupt
+#define FCH_IRQ_GPPINT0 0x50 // Gpp Int0
+#define FCH_IRQ_GPPINT1 0x51 // Gpp Int1
+#define FCH_IRQ_GPPINT2 0x52 // Gpp Int2
+#define FCH_IRQ_GPPINT3 0x53 // Gpp Int3
+#define FCH_IRQ_IOAPIC 0x80 // Select IRQ routing to IoApic mode
+#define FCH_IRQ_PIC 0x00 // Select IRQ routing to PIC mode
+
+#define FCH_SPI_MMIO_REG00 0x00 //SPI_
+#define FCH_SPI_OPCODE 0x000000FFl //
+#define FCH_SPI_TX_COUNT 0x00000F00l //
+#define FCH_SPI_RX_COUNT 0x0000F000l //
+#define FCH_SPI_EXEC_OPCODE 0x00010000l //
+#define FCH_SPI_FIFO_PTR_CRL 0x00100000l //
+#define FCH_SPI_FIFO_PTR_INC 0x00200000l //
+#define FCH_SPI_BUSY 0x80000000l //
+#define FCH_SPI_MMIO_REG0C 0x0C //SPI_Cntrl1 Register
+#define FCH_SPI_PARAMETER 0x000000FFl //
+#define FCH_SPI_FIFO_PTR 0x00000700l //
+#define FCH_SPI_BYTE_PROGRAM 0xFF000000l //
+#define FCH_SPI_MMIO_REG1C 0x1C //
+#define FCH_SPI_RETRY_TIMES 0x3 //
+
+#define FCH_SPI_MMIO_REG1D 0x1D //
+#define FCH_SPI_MMIO_REG1E 0x1E //
+#define FCH_SPI_MMIO_REG1F 0x1F //
+
+#define FCH_SPI_MMIO_REG1F_X05_TX_BYTE_COUNT 0x05 //
+#define FCH_SPI_MMIO_REG1F_X06_RX_BYTE_COUNT 0x06 //
+
+#define FCH_SPI_MMIO_REG20 0x20 //
+#define FCH_SPI_MMIO_REG22 0x22 //
+
+#define FCH_SPI_MMIO_REG45_CMDCODE 0x45 //
+#define FCH_SPI_MMIO_REG47_CMDTRIGGER 0x47 //
+#define FCH_SPI_MMIO_REG48_TXBYTECOUNT 0x48 //
+#define FCH_SPI_MMIO_REG4B_RXBYTECOUNT 0x4B //
+#define FCH_SPI_MMIO_REG4C_SPISTATUS 0x4C //
+#define FCH_SPI_MMIO_REG80_FIFO 0x80 //
+
+#define FCH_SPI_MODE_FAST 0x7 //
+#define FCH_SPI_MODE_NORMAL 0x6 //
+#define FCH_SPI_MODE_QUAL_144 0x5 //
+#define FCH_SPI_MODE_QUAL_122 0x4 //
+#define FCH_SPI_MODE_QUAL_114 0x3 //
+#define FCH_SPI_MODE_QUAL_112 0x2 //
+
+#define FCH_SPI_DEVICE_MODE_DIS 0x7 //
+#define FCH_SPI_DEVICE_MODE_144 0x4 //
+#define FCH_SPI_DEVICE_MODE_114 0x3 //
+#define FCH_SPI_DEVICE_MODE_122 0x2 //
+#define FCH_SPI_DEVICE_MODE_112 0x1 //
+#define FCH_SPI_DEVICE_MODE_FAST 0x0 //
+
+#define FCH_SPI_SPEED_16M 0x4 //
+#define FCH_SPI_SPEED_22M 0x3 //
+#define FCH_SPI_SPEED_33M 0x2 //
+#define FCH_SPI_SPEED_66M 0x1 //
+#define FCH_SPI_SPEED_100M 0x5 //
+
+#define AMD_NB_REG78 0x78
+#define AMD_NB_SCRATCH AMD_NB_REG78
+#define MailBoxPort 0x3E
+
+#define MAX_LT_POLLINGS 0x4000
+#define SMI_TIMER_ENABLE BIT15
+
+
+#define ACPIMMIO32(x) (*(volatile UINT32*)(UINTN)(x))
+#define ACPIMMIO16(x) (*(volatile UINT16*)(UINTN)(x))
+#define ACPIMMIO8(x) (*(volatile UINT8*)(UINTN)(x))
+
+#define U3PLL_LOCK BIT7
+#define U3PLL_RESET BIT8
+#define U3PHY_RESET BIT9
+#define U3CORE_RESET BIT10
+#define XHC0_FUNC_RESET BIT11
+#define XHC1_FUNC_RESET BIT12
+
+#define XHCI_ACPI_MMIO_AMD_REG00 0x00
+#define XHCI_ACPI_MMIO_AMD_REG04 0x04
+#define XHCI_ACPI_MMIO_AMD_REG08 0x08
+#define XHCI_ACPI_MMIO_AMD_REG10 0x10
+#define XHCI_ACPI_MMIO_AMD_REG14 0x14
+#define XHCI_ACPI_MMIO_AMD_REG20 0x20
+#define XHCI_ACPI_MMIO_AMD_REG24 0x24
+#define XHCI_ACPI_MMIO_AMD_REG30 0x30
+#define XHCI_ACPI_MMIO_AMD_REG40 0x40
+#define XHCI_ACPI_MMIO_AMD_REG48 0x48 // USB3.0_Ind_REG Index
+#define XHCI_ACPI_MMIO_AMD_REG4C 0x4C // USB2.0_Ind_REG Data
+#define XHCI_ACPI_MMIO_AMD_REG8C 0x8C
+#define XHCI_ACPI_MMIO_AMD_REG90 0x90 // adaptation timer settings
+#define XHCI_ACPI_MMIO_AMD_REGA0 0xA0 // BAR 0
+#define XHCI_ACPI_MMIO_AMD_REGA4 0xA4 // BAR 1
+#define XHCI_ACPI_MMIO_AMD_REGA8 0xA8 // BAR 2
+#define XHCI_ACPI_MMIO_AMD_REGB0 0xB0 // SPI_Valid_Base.
+#define XHCI_ACPI_MMIO_AMD_REGC0 0xC0 // Firmware starting offset for coping
+#define XHCI_ACPI_MMIO_AMD_REGB4 0xB4
+#define XHCI_ACPI_MMIO_AMD_REGD0 0xD0
+
+#define FCH_XHCI_REG48 0x48 // XHCI IND_REG Index registers
+#define FCH_XHCI_REG4C 0x4C // XHCI IND_REG Data registers
+
+#define FCH_XHCI_IND60_BASE 0x40000000ul //
+
+#define FCH_XHCI_IND60_REG00 FCH_XHCI_IND60_BASE + 0x00 //
+#define FCH_XHCI_IND60_REG04 FCH_XHCI_IND60_BASE + 0x04 //
+#define FCH_XHCI_IND60_REG08 FCH_XHCI_IND60_BASE + 0x08 //
+#define FCH_XHCI_IND60_REG0C FCH_XHCI_IND60_BASE + 0x0C //
+#define FCH_XHCI_IND60_REG18 FCH_XHCI_IND60_BASE + 0x18 //
+#define FCH_XHCI_IND60_REG48 FCH_XHCI_IND60_BASE + 0x48 //
+#define FCH_XHCI_IND60_REG50 FCH_XHCI_IND60_BASE + 0x50 //
+#define FCH_XHCI_IND60_REG54 FCH_XHCI_IND60_BASE + 0x54 //
+
+#define FCH_XHCI_IND_REG00 0x00
+#define FCH_XHCI_IND_REG04 0x04
+#define FCH_XHCI_IND_REG48 0x48
+#define FCH_XHCI_IND_REG54 0x54
+#define FCH_XHCI_IND_REG88 0x88
+#define FCH_XHCI_IND_REG94 0x94
+#define FCH_XHCI_IND_REG98 0x98
+#define FCH_XHCI_IND_REGC8 0xC8
+#define FCH_XHCI_IND_REGD4 0xD4
+#define FCH_XHCI_IND_REGD8 0xD8
+#define FCH_XHCI_IND_REG100 0x100
+#define FCH_XHCI_IND_REG120 0x120
+#define FCH_XHCI_IND_REG128 0x128
+#define MAX_XHCI_PORTS 0x04
+
+//SMBUS
+#define FCH_SMB_IOREG00 0x00 // SMBusStatus
+#define FCH_SMB_IOREG01 0x01 // SMBusSlaveStatus
+#define FCH_SMB_IOREG02 0x02 // SMBusControl
+#define FCH_SMB_IOREG03 0x03 // SMBusHostCmd
+#define FCH_SMB_IOREG04 0x04 // SMBusAddress
+#define FCH_SMB_IOREG05 0x05 // SMBusData0
+#define FCH_SMB_IOREG06 0x06 // SMBusData1
+#define FCH_SMB_IOREG07 0x07 // SMBusBlockData
+#define FCH_SMB_IOREG08 0x08 // SMBusSlaveControl
+#define FCH_SMB_IOREG14 0x14 // SMBusAutoPoll
+#define FCH_SMB_IOREG16 0x16 // SMBusPausePoll
+#define FCH_SMB_IOREG17 0x17 // SMBusHostCmd2
+
+#define FCH_SMB_CMD_QUICK 0x00 << 2 // Quick Read or Write
+#define FCH_SMB_CMD_BYTE 0x01 << 2 // Byte Read or Write
+#define FCH_SMB_CMD_BYTE_DATA 0x02 << 2 // Byte Data Read or Write
+#define FCH_SMB_CMD_WORD_DATA 0x03 << 2 // Word Data Read or Write
+#define FCH_SMB_CMD_BLOCK 0x05 << 2 // Block Read or Write
+
+#define FCH_SMB_ALL_HOST_STATUS 0x1f // HostBusy+SMBInterrupt+DeviceErr+BusCollision+Failed
+#define FCH_SMB_CMD_BYTE_DATA_START 0x48 // Byte Data Read or Write
+#define FCH_SMB_CMD_START BIT6
+#define FCH_SMB_READ_ENABLE BIT0
+#define FCH_SMB_AUTO_POLL_EN BIT0
+#define FCH_SMB_POLL2BYTE BIT7
+
+
+#define FCH_EC_ENTER_CONFIG 0X5A
+#define FCH_EC_EXIT_CONFIG 0XA5
+#define FCH_EC_REG07 0X07
+#define FCH_EC_REG30 0X30
+#define FCH_EC_REG60 0X60
+#define FCH_EC_REG61 0X61
+
+#define FCH_IMC_ROMSIG 0x55aa55aaul
+
+#define SPI_HEAD_LENGTH 0x0E
+#define SPI_BAR0_VLD 0x01
+#define SPI_BASE0 (0x00 << 7)
+#define SPI_BAR1_VLD (0x01 << 8)
+#define SPI_BASE1 (SPI_HEAD_LENGTH << 10)
+#define SPI_BAR2_VLD (0x01 << 16)
+#define SPI_BASE2(x) ((SPI_HEAD_LENGTH + ACPIMMIO16(x)) << 18)
+
+#define FW_TO_SIGADDR_OFFSET 0x0C
+#define BCD_ADDR_OFFSET 0x02
+#define BCD_SIZE_OFFSET 0x04
+#define FW_ADDR_OFFSET 0x06
+#define FW_SIZE_OFFSET 0x08
+#define ACD_ADDR_OFFSET 0x0A
+#define ACD_SIZE_OFFSET 0x0C
+#define XHC_BOOT_RAM_SIZE 0x8000
+
+#define PKT_DATA_REG ACPI_MMIO_BASE + GFX_DAC_BASE + 0x00
+#define PKT_LEN_REG ACPI_MMIO_BASE + GFX_DAC_BASE + 0x14
+#define PKT_CTRL_REG ACPI_MMIO_BASE + GFX_DAC_BASE + 0x15
+#define EFUS_DAC_ADJUSTMENT_CONTROL 0x850A8ul
+#define BGADJ 0x1F
+#define DACADJ 0x1B
+#define EFUS_DAC_ADJUSTMENT_CONTROL_DATA (BGADJ + (DACADJ << 8) + BIT16 )
+
+#define KABINI_OSC_OUT_CLOCK_SEL_48MHz 0x02
+#define KABINI_OSC_OUT_CLOCK_SEL_25MHz 0x01
+
+#ifndef FCH_DEADLOOP
+ #define FCH_DEADLOOP() { volatile UINTN __i; __i = 1; while (__i); }
+#endif
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/FchPlatform.h b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/FchPlatform.h
new file mode 100644
index 0000000..ebf7599
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/FchPlatform.h
@@ -0,0 +1,117 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH platform definition
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#ifndef _FCH_PLATFORM_H_
+#define _FCH_PLATFORM_H_
+
+#define MAX_SATA_PORTS 8
+
+#include "AGESA.h"
+
+#ifndef FCHOEM_ACPI_RESTORE_SWSMI
+ #define FCHOEM_BEFORE_PCI_RESTORE_SWSMI 0xD3
+ #define FCHOEM_AFTER_PCI_RESTORE_SWSMI 0xD4
+ #define FCHOEM_ENABLE_ACPI_SWSMI 0xA0
+ #define FCHOEM_DISABLE_ACPI_SWSMI 0xA1
+ #define FCHOEM_START_TIMER_SMI 0xBC
+ #define FCHOEM_STOP_TIMER_SMI 0xBD
+#endif
+
+#ifndef FCHOEM_SPI_UNLOCK_SWSMI
+ #define FCHOEM_SPI_UNLOCK_SWSMI 0xAA
+#endif
+#ifndef FCHOEM_SPI_LOCK_SWSMI
+ #define FCHOEM_SPI_LOCK_SWSMI 0xAB
+#endif
+
+#ifndef FCHOEM_ACPI_TABLE_RANGE_LOW
+ #define FCHOEM_ACPI_TABLE_RANGE_LOW 0xE0000ul
+#endif
+
+#ifndef FCHOEM_ACPI_TABLE_RANGE_HIGH
+ #define FCHOEM_ACPI_TABLE_RANGE_HIGH 0xFFFF0ul
+#endif
+
+#ifndef FCHOEM_ACPI_BYTE_CHECHSUM
+ #define FCHOEM_ACPI_BYTE_CHECHSUM 0x100
+#endif
+
+#ifndef FCHOEM_IO_DELAY_PORT
+ #define FCHOEM_IO_DELAY_PORT 0x80
+#endif
+
+#ifndef FCHOEM_OUTPUT_DEBUG_PORT
+ #define FCHOEM_OUTPUT_DEBUG_PORT 0x80
+#endif
+
+#define FCH_PCIRST_BASE_IO 0xCF9
+#define FCH_PCI_RESET_COMMAND06 0x06
+#define FCH_PCI_RESET_COMMAND0E 0x0E
+#define FCH_KBDRST_BASE_IO 0x64
+#define FCH_KBC_RESET_COMMAND 0xFE
+#define FCH_ROMSIG_BASE_IO 0x20000l
+#define FCH_ROMSIG_SIGNATURE 0x55AA55AAul
+#define FCH_MAX_TIMER 0xFFFFFFFFul
+#define FCH_HPET_REG_MASK 0xFFFFF800ul
+#define FCH_FAKE_USB_BAR_ADDRESS 0x58830000ul
+
+
+#ifndef FCHOEM_ELAPSED_TIME_UNIT
+ #define FCHOEM_ELAPSED_TIME_UNIT 28
+#endif
+
+#ifndef FCHOEM_ELAPSED_TIME_DIVIDER
+ #define FCHOEM_ELAPSED_TIME_DIVIDER 100
+#endif
+
+#include "Fch.h"
+#include "amdlib.h"
+#include "FchCommonCfg.h"
+#include "AcpiLib.h"
+#include "FchDef.h"
+#include "FchBiosRamUsage.h"
+#include "AmdFch.h"
+
+extern BUILD_OPT_CFG UserOptions;
+
+#endif // _FCH_PLATFORM_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/Family/Yangtze/YangtzeHwAcpiEnvService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/Family/Yangtze/YangtzeHwAcpiEnvService.c
new file mode 100644
index 0000000..a035a72
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/Family/Yangtze/YangtzeHwAcpiEnvService.c
@@ -0,0 +1,485 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch HwAcpi controller
+ *
+ * Init HwAcpi Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87262 $ @e \$Date: 2013-01-31 09:13:43 -0600 (Thu, 31 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "amdlib.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_HWACPI_FAMILY_YANGTZE_YANGTZEHWACPIENVSERVICE_FILECODE
+
+#define AMD_CPUID_APICID_LPC_BID 0x00000001ul // Local APIC ID, Logical Processor Count, Brand ID
+
+ACPI_REG_WRITE FchYangtzeInitEnvSpecificHwAcpiMmioTable[] =
+{
+ {00, 00, 0xB0, 0xAC},
+ {PMIO_BASE >> 8, FCH_PMIOA_REG28, (UINT8)~(BIT0 + BIT2), BIT0}, // Set ASF SMBUS master function enabled here (temporary)
+#ifdef ACPI_SLEEP_TRAP
+ {SMI_BASE >> 8, FCH_SMI_REGB0, (UINT8)~(BIT2 + BIT3), BIT2}, // Set SLP_TYPE as SMI event
+ {PMIO_BASE >> 8, FCH_PMIOA_REGBE, (UINT8)~BIT5, 0x00}, // Disabled SLP function for S1/S3/S4/S5
+ {PMIO_BASE >> 8, 0x08 + 3, (UINT8)~(BIT0 + BIT1), BIT1}, // Set S state transition disabled (BIT0) force ACPI to
+ // send SMI message when writing to SLP_TYP Acpi register. (BIT1)
+ {SMI_BASE >> 8, FCH_SMI_REG98 + 3, (UINT8)~BIT7, 0x00}, // Enabled Global Smi ( BIT7 clear as 0 to enable )
+#endif
+ {PMIO_BASE >> 8, 0x80 + 1, (UINT8)~(BIT3 + BIT4), BIT3 + BIT4},
+ {0xFF, 0xFF, 0xFF, 0xFF},
+};
+
+
+/**
+ * FchInitEnvHwAcpiMmioTable - Fch ACPI MMIO initial
+ * during POST.
+ *
+ */
+ACPI_REG_WRITE FchYangtzeInitEnvHwAcpiMmioTable[] =
+{
+ {00, 00, 0xB0, 0xAC}, /// Signature
+
+ //
+ // HPET workaround
+ //
+ {PMIO_BASE >> 8, FCH_PMIOA_REG54 + 2, 0x7F, BIT7},
+ {PMIO_BASE >> 8, FCH_PMIOA_REG54 + 2, 0x7F, 0x00},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGC4, (UINT8)~BIT2, BIT2},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGC0, 0, 0x3D},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGC0 + 1, 0x0, 0x04},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGC2, 0x20, 0x58},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGC2 + 1, 0, 0x40},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGC2, (UINT8)~(BIT4), BIT4},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGCC, 0xF8, 0x07},
+ {PMIO_BASE >> 8, FCH_PMIOA_REG74, 0x00, BIT0 + BIT1 + BIT2 + BIT4},
+ {PMIO_BASE >> 8, 0x74 + 3, (UINT8)~BIT5, 0},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGBA, (UINT8)~BIT3, BIT3},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGBA + 1, (UINT8)~BIT6, BIT6},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGBC, (UINT8)~BIT1, BIT1},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGED, (UINT8)~(BIT0 + BIT1), 0},
+ {PMIO_BASE >> 8, 0xDC, 0x7C, BIT1},
+
+ {SMI_BASE >> 8, FCH_SMI_Gevent1, 0, 1},
+ {SMI_BASE >> 8, FCH_SMI_Gevent3, 0, 3},
+ {SMI_BASE >> 8, FCH_SMI_Gevent4, 0, 4},
+ {SMI_BASE >> 8, FCH_SMI_Gevent5, 0, 5},
+ {SMI_BASE >> 8, FCH_SMI_Gevent6, 0, 6},
+ {SMI_BASE >> 8, FCH_SMI_Gevent23, 0, 23},
+ {SMI_BASE >> 8, FCH_SMI_xHC0Pme, 0, 11},
+ {SMI_BASE >> 8, FCH_SMI_xHC1Pme, 0, 11},
+ {SMI_BASE >> 8, FCH_SMI_Usbwakup0, 0, 11},
+ {SMI_BASE >> 8, FCH_SMI_Usbwakup1, 0, 11},
+ {SMI_BASE >> 8, FCH_SMI_Usbwakup2, 0, 11},
+ {SMI_BASE >> 8, FCH_SMI_Usbwakup3, 0, 11},
+ {SMI_BASE >> 8, FCH_SMI_IMCGevent0, 0, 12},
+ {SMI_BASE >> 8, FCH_SMI_FanThGevent, 0, 13},
+ {SMI_BASE >> 8, FCH_SMI_SBGppPme0, 0, 15},
+ {SMI_BASE >> 8, FCH_SMI_SBGppPme1, 0, 16},
+ {SMI_BASE >> 8, FCH_SMI_SBGppPme2, 0, 17},
+ {SMI_BASE >> 8, FCH_SMI_SBGppPme3, 0, 18},
+ {SMI_BASE >> 8, FCH_SMI_GecPme, 0, 19},
+ {SMI_BASE >> 8, FCH_SMI_CIRPme, 0, 28},
+ {SMI_BASE >> 8, FCH_SMI_Gevent8, 0, 24},
+// {SMI_BASE >> 8, FCH_SMI_AzaliaPme, 0, 27},
+ {SMI_BASE >> 8, FCH_SMI_SataGevent0, 0, 30},
+ {SMI_BASE >> 8, FCH_SMI_SataGevent1, 0, 31},
+ {SMI_BASE >> 8, FCH_SMI_REG08, 0xE7, 0},
+ {SMI_BASE >> 8, FCH_SMI_REG0C + 2, (UINT8)~BIT3, BIT3},
+ {SMI_BASE >> 8, FCH_SMI_TWARN, 0, 9},
+ {0xFF, 0xFF, 0xFF, 0xFF},
+};
+
+/**
+ * FchYangtzeInitEnvHwAcpiPciTable - PCI device registers initial
+ * during early POST.
+ *
+ */
+REG8_MASK FchYangtzeInitEnvHwAcpiPciTable[] =
+{
+ //
+ // SMBUS Device (Bus 0, Dev 20, Func 0)
+ //
+ {0x00, SMBUS_BUS_DEV_FUN, 0},
+ {FCH_CFG_REG10, 0X00, (FCH_VERSION & 0xFF)}, ///Program the version information
+ {FCH_CFG_REG11, 0X00, (FCH_VERSION >> 8)},
+ {0xFF, 0xFF, 0xFF},
+};
+
+
+/**
+ * ProgramEnvPFchAcpiMmio - Config HwAcpi MMIO registers
+ * Acpi S3 resume won't execute this procedure (POST only)
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+ProgramEnvPFchAcpiMmio (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ ProgramFchAcpiMmioTbl ((ACPI_REG_WRITE*) (&FchYangtzeInitEnvHwAcpiMmioTable[0]), StdHeader);
+}
+
+/**
+ * ProgramFchEnvHwAcpiPciReg - Config HwAcpi PCI controller
+ * before PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+ProgramFchEnvHwAcpiPciReg (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ //
+ //Early post initialization of pci config space
+ //
+ ProgramPciByteTable ((REG8_MASK*) (&FchYangtzeInitEnvHwAcpiPciTable[0]), sizeof (FchYangtzeInitEnvHwAcpiPciTable) / sizeof (REG8_MASK), StdHeader);
+
+ if ( LocalCfgPtr->Smbus.SmbusSsid != 0 ) {
+ RwPci ((SMBUS_BUS_DEV_FUN << 16) + FCH_CFG_REG2C, AccessWidth32, 0x00, LocalCfgPtr->Smbus.SmbusSsid, StdHeader);
+ }
+ ProgramPcieNativeMode (FchDataPtr);
+}
+
+/**
+ * FchVgaInit - Config VGA CODEC
+ *
+ * @param[in] VOID empty
+ *
+ */
+VOID
+FchVgaInit (
+ OUT VOID
+ )
+{
+}
+
+/**
+ * ProgramSpecificFchInitEnvAcpiMmio - Config HwAcpi MMIO before
+ * PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+ProgramSpecificFchInitEnvAcpiMmio (
+ IN VOID *FchDataPtr
+ )
+{
+ CPUID_DATA CpuId;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ ProgramFchAcpiMmioTbl ((ACPI_REG_WRITE*) (&FchYangtzeInitEnvSpecificHwAcpiMmioTable[0]), StdHeader);
+
+ LibAmdCpuidRead (AMD_CPUID_APICID_LPC_BID, &CpuId, StdHeader);
+
+ if ((LocalCfgPtr->HwAcpi.AnyHt200MhzLink) || ((CpuId.EAX_Reg & 0x00ff00f0) == 0x100080) || ((CpuId.EAX_Reg & 0x00ff00f0) == 0x100090) || ((CpuId.EAX_Reg & 0x00ff00f0) == 0x1000A0)) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG94, AccessWidth8, 0, 0x0A);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0x80 + 3, AccessWidth8, 0xFE, 0x28);
+ } else {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG94, AccessWidth8, 0, 0x01);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0x80 + 3, AccessWidth8, 0xFE, 0x20);
+ }
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG6C + 2, AccessWidth8, 0x5F, 0xA0);
+ //
+ // Ac Loss Control
+ //
+ AcLossControl ((UINT8) LocalCfgPtr->HwAcpi.PwrFailShadow);
+ //
+ // FCH VGA Init
+ //
+ FchVgaInit ();
+
+ //
+ // Set ACPIMMIO by OEM Input table
+ //
+ ProgramFchAcpiMmioTbl ((ACPI_REG_WRITE *) (LocalCfgPtr->HwAcpi.OemProgrammingTablePtr), StdHeader);
+}
+
+/**
+ * ValidateFchVariant - Validate FCH Variant
+ *
+ *
+ *
+ * @param[in] FchDataPtr
+ *
+ */
+VOID
+ValidateFchVariant (
+ IN VOID *FchDataPtr
+ )
+{
+ CPUID_DATA CpuId;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+ LibAmdCpuidRead (CPUID_FMF, &CpuId, StdHeader);
+ LocalCfgPtr->Misc.FchCpuId = ( UINT32 ) (CpuId.EAX_Reg & 0xFFFFFFFF);
+}
+
+/**
+ * IsExternalClockMode - Is External Clock Mode?
+ *
+ *
+ * @retval TRUE or FALSE
+ *
+ */
+BOOLEAN
+IsExternalClockMode (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 MISC80;
+ ReadMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG80 + 2, AccessWidth8, &MISC80);
+ return ( (BOOLEAN) ((MISC80 & BIT1) == 0) );
+}
+
+
+/**
+ * ProgramFchEnvSpreadSpectrum - Config SpreadSpectrum before
+ * PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+ProgramFchEnvSpreadSpectrum (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 PortStatus;
+ UINT8 FchSpreadSpectrum;
+
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ FchSpreadSpectrum = LocalCfgPtr->HwAcpi.SpreadSpectrum;
+
+ if ( FchSpreadSpectrum ) {
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG08, AccessWidth8, 0xFE, 0x00);
+ if ( LocalCfgPtr->HwAcpi.SpreadSpectrumOptions == 0 ) {
+ /// -0.362%
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG18 + 1, AccessWidth8, 0xF0, 0x01);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG14 + 2, AccessWidth16, 0, 0xCF5C);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG14, AccessWidth16, 0, 0x0137);
+ }
+ if ( LocalCfgPtr->HwAcpi.SpreadSpectrumOptions == 1 ) {
+ /// -0.375%
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG18 + 1, AccessWidth8, 0xF0, 0x01);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG14 + 2, AccessWidth16, 0, 0xE000);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG14, AccessWidth16, 0, 0x0142);
+ }
+ if ( LocalCfgPtr->HwAcpi.SpreadSpectrumOptions == 2 ) {
+ /// -0.4%
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG18 + 1, AccessWidth8, 0xF0, 0x02);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG14 + 2, AccessWidth16, 0, 0);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG14, AccessWidth16, 0, 0x0158);
+ }
+ if ( LocalCfgPtr->HwAcpi.SpreadSpectrumOptions == 3 ) {
+ /// -0.425%
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG18 + 1, AccessWidth8, 0xF0, 0x02);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG14 + 2, AccessWidth16, 0, 0x1FFF);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG14, AccessWidth16, 0, 0x016D);
+ }
+ if ( LocalCfgPtr->HwAcpi.SpreadSpectrumOptions == 4 ) {
+ /// -0.45%
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG18 + 1, AccessWidth8, 0xF0, 0x02);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG14 + 2, AccessWidth16, 0, 0x4000);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG14, AccessWidth16, 0, 0x0183);
+ }
+ if ( LocalCfgPtr->HwAcpi.SpreadSpectrumOptions == 5 ) {
+ /// -0.475%
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG18 + 1, AccessWidth8, 0xF0, 0x02);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG14 + 2, AccessWidth16, 0, 0x6000);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG14, AccessWidth16, 0, 0x0198);
+ }
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG08, AccessWidth8, 0xFE, BIT0);
+ } else {
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG08, AccessWidth8, 0xFE, 0x00);
+ }
+
+ //
+ // PLL 100Mhz Reference Clock Buffer setting for internal clock generator mode (BIT5)
+ // OSC Clock setting for internal clock generator mode (BIT6)
+ //
+ GetChipSysMode (&PortStatus, StdHeader);
+ if ( ((PortStatus & ChipSysIntClkGen) == ChipSysIntClkGen) ) {
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG04 + 1, AccessWidth8, (UINT32)~(BIT5 + BIT6), BIT5 + BIT6);
+ }
+}
+
+/**
+ * TurnOffCG2
+ *
+ *
+ * @retval VOID
+ *
+ */
+VOID
+TurnOffCG2 (
+ OUT VOID
+ )
+{
+}
+
+/**
+ * BackUpCG2
+ *
+ *
+ * @retval VOID
+ *
+ */
+VOID
+BackUpCG2 (
+ OUT VOID
+ )
+{
+}
+
+/**
+ * HpetInit - Program Fch HPET function
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+HpetInit (
+ IN VOID *FchDataPtr
+ )
+{
+ DESCRIPTION_HEADER *HpetTable;
+ UINT8 FchHpetTimer;
+ UINT8 FchHpetMsiDis;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ FchHpetTimer = (UINT8) LocalCfgPtr->Hpet.HpetEnable;
+ FchHpetMsiDis = (UINT8) LocalCfgPtr->Hpet.HpetMsiDis;
+
+ HpetTable = NULL;
+ if ( FchHpetTimer == TRUE ) {
+ //
+ //Program the HPET BAR address
+ //
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG50, AccessWidth32, FCH_HPET_REG_MASK, LocalCfgPtr->Hpet.HpetBase);
+
+ //
+ //Enabling decoding of HPET MMIO
+ //Enable HPET MSI support
+ //Enable High Precision Event Timer (also called Multimedia Timer) interrupt
+ //
+ if ( FchHpetMsiDis == FALSE ) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG50, AccessWidth32, FCH_HPET_REG_MASK, BIT0 + BIT1 + BIT2 + BIT3 + BIT4);
+#ifdef FCH_TIMER_TICK_INTERVAL_WA
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG50, AccessWidth32, FCH_HPET_REG_MASK, BIT0 + BIT1);
+#endif
+ } else {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG50, AccessWidth32, FCH_HPET_REG_MASK, BIT0 + BIT1);
+ }
+
+ } else {
+ if ( ! (LocalCfgPtr->Misc.S3Resume) ) {
+ HpetTable = (DESCRIPTION_HEADER*) AcpiLocateTable (Int32FromChar('H','P','E','T'));//'TEPH'
+ }
+ if ( HpetTable != NULL ) {
+ HpetTable->Signature = Int32FromChar('T','E','P','H');//'HPET'
+ }
+ }
+}
+
+/**
+ * ProgramPcieNativeMode - Config Pcie Native Mode
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+ProgramPcieNativeMode (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 FchNativepciesupport;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ FchNativepciesupport = (UINT8) LocalCfgPtr->Misc.NativePcieSupport;
+
+ //
+ // PCIE Native setting
+ //
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGBA + 1, AccessWidth8, (UINT32)~BIT6, 0);
+ if ( FchNativepciesupport == 1) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0x74 + 3, AccessWidth8, (UINT32)~(BIT3 + BIT1 + BIT0), BIT3 + BIT0);
+ } else {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0x74 + 3, AccessWidth8, (UINT32)~(BIT3 + BIT1 + BIT0), BIT3);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/Family/Yangtze/YangtzeHwAcpiLateService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/Family/Yangtze/YangtzeHwAcpiLateService.c
new file mode 100644
index 0000000..2913e6f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/Family/Yangtze/YangtzeHwAcpiLateService.c
@@ -0,0 +1,152 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch HwAcpi controller
+ *
+ * Init HwAcpi Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_HWACPI_FAMILY_YANGTZE_YANGTZEHWACPILATESERVICE_FILECODE
+
+#define AMD_CPUID_APICID_LPC_BID 0x00000001ul // Local APIC ID, Logical Processor Count, Brand ID
+
+
+/**
+ * GcpuRelatedSetting - Program Gcpu C related function
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+GcpuRelatedSetting (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 FchAcDcMsg;
+ UINT8 FchTimerTickTrack;
+ UINT8 FchClockInterruptTag;
+ UINT8 FchOhciTrafficHanding;
+ UINT8 FchEhciTrafficHanding;
+ UINT8 FchGcpuMsgCMultiCore;
+ UINT8 FchGcpuMsgCStage;
+ UINT32 Value;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ FchAcDcMsg = (UINT8) LocalCfgPtr->Gcpu.AcDcMsg;
+ FchTimerTickTrack = (UINT8) LocalCfgPtr->Gcpu.TimerTickTrack;
+ FchClockInterruptTag = (UINT8) LocalCfgPtr->Gcpu.ClockInterruptTag;
+ FchOhciTrafficHanding = (UINT8) LocalCfgPtr->Gcpu.OhciTrafficHanding;
+ FchEhciTrafficHanding = (UINT8) LocalCfgPtr->Gcpu.EhciTrafficHanding;
+ FchGcpuMsgCMultiCore = (UINT8) LocalCfgPtr->Gcpu.GcpuMsgCMultiCore;
+ FchGcpuMsgCStage = (UINT8) LocalCfgPtr->Gcpu.GcpuMsgCStage;
+
+ ReadMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGA0, AccessWidth32, &Value);
+ Value = Value & 0xC07F00A0;
+
+ if ( FchAcDcMsg ) {
+ Value = Value | BIT0;
+ }
+
+ if ( FchTimerTickTrack ) {
+ Value = Value | BIT1;
+ }
+
+ if ( FchClockInterruptTag ) {
+ Value = Value | BIT10;
+ }
+
+ if ( FchOhciTrafficHanding ) {
+ Value = Value | BIT13;
+ }
+
+ if ( FchEhciTrafficHanding ) {
+ Value = Value | BIT15;
+ }
+
+ if ( FchGcpuMsgCMultiCore ) {
+ Value = Value | BIT23;
+ }
+
+ if ( FchGcpuMsgCMultiCore ) {
+ Value = (Value | (BIT6 + BIT4 + BIT3 + BIT2));
+ }
+
+ WriteMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGA0, AccessWidth32, &Value);
+}
+
+/**
+ * StressResetModeLate - Stress Reset Mode
+ *
+ *
+ *
+ * @param[in] FchDataPtr
+ *
+ */
+VOID
+StressResetModeLate (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ switch ( LocalCfgPtr->HwAcpi.StressResetMode ) {
+ case 0:
+ return;
+ default:
+ ASSERT (FALSE);
+ return;
+ }
+ while (LocalCfgPtr->HwAcpi.StressResetMode) {
+ }
+}
+
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/Family/Yangtze/YangtzeHwAcpiMidService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/Family/Yangtze/YangtzeHwAcpiMidService.c
new file mode 100644
index 0000000..394e77d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/Family/Yangtze/YangtzeHwAcpiMidService.c
@@ -0,0 +1,48 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch HwAcpi controller
+ *
+ * Init HwAcpi Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "amdlib.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_HWACPI_FAMILY_YANGTZE_YANGTZEHWACPIMIDSERVICE_FILECODE
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/Family/Yangtze/YangtzeSSService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/Family/Yangtze/YangtzeSSService.c
new file mode 100644
index 0000000..3db2cbe
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/Family/Yangtze/YangtzeSSService.c
@@ -0,0 +1,124 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch HwAcpi controller
+ *
+ * Init Spread Spectrum features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 86067 $ @e \$Date: 2013-01-15 19:48:08 -0600 (Tue, 15 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "amdlib.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_HWACPI_FAMILY_YANGTZE_YANGTZESSSERVICE_FILECODE
+
+/**
+ * FchInitResetAcpiMmioTable - Fch ACPI MMIO initial
+ * during the power on stage.
+ *
+ *
+ *
+ *
+ */
+ACPI_REG_WRITE FchInitResetAcpiMmioTable[] =
+{
+ {00, 00, 0xB0, 0xAC},
+ //
+ // Supported Yuba RPR / KR BKDG spread-spectrum setting.
+ //
+ {MISC_BASE >> 8, FCH_MISC_REG40 + 1, 0x0F, 0x40},
+ {MISC_BASE >> 8, FCH_MISC_REG40, 0xEF, 0x00},
+ {PMIO_BASE >> 8, 0x5D, 0xFC, BIT1},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGD2, 0xCF, 0x00},
+ {SMBUS_BASE >> 8, FCH_SMBUS_REG12, 0x00, BIT0},
+ {PMIO_BASE >> 8, FCH_PMIOA_REG44 + 3, 0x67, 0},
+ {PMIO_BASE >> 8, FCH_PMIOA_REG48, 0xFF, BIT0},
+ {PMIO_BASE >> 8, FCH_PMIOA_REG00, 0xFF, 0x0E},
+ {PMIO_BASE >> 8, FCH_PMIOA_REG00 + 2, 0xFF, 0x40},
+ {PMIO_BASE >> 8, FCH_PMIOA_REG00 + 3, 0xFF, 0x08},
+ {PMIO_BASE >> 8, FCH_PMIOA_REG34, 0xEF, BIT0 + BIT1},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGEC, 0xF9, BIT1 + BIT2},
+ {PMIO_BASE >> 8, FCH_PMIOA_REG08, 0xFE, BIT2 + BIT4},
+ {PMIO_BASE >> 8, FCH_PMIOA_REG08 + 1, 0xFF, BIT0},
+ {PMIO_BASE >> 8, FCH_PMIOA_REG54, 0x00, BIT4 + BIT6 + BIT7},
+ {PMIO_BASE >> 8, 0x74, 0xF6, BIT0 + BIT3},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGF0, (UINT8)~BIT2, 0x00},
+
+ {PMIO_BASE >> 8, FCH_PMIOA_REGF8, 0x00, 0x6C},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGF8 + 1, 0x00, 0x07},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGF8 + 2, 0x00, 0x00},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGC4, 0xee, 0x04},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGC0 + 2, 0xBF, 0x40},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGBE, 0xDF, BIT5},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGBB, 0xFF, BIT2},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGD0, 0xFF, 0},
+ {PMIO_BASE >> 8, FCH_PMIOA_REGD7, 0xFD, 0},
+ {MISC_BASE >> 8, FCH_MISC_REG6C + 2, 0x7F, BIT7},
+ {MISC_BASE >> 8, FCH_MISC_REG6C + 3, 0xF7, BIT3}, // MISC 0x6C BIT27
+ {MISC_BASE >> 8, FCH_MISC_REG1C + 0x03, 0xDF, 0x00},
+ {MISC_BASE >> 8, FCH_MISC_REG1C + 0x02, 0x9F, 0x60},
+ {MISC_BASE >> 8, FCH_MISC_REG1C + 0x03, 0xFA, 0x05},
+ {0xFF, 0xFF, 0xFF, 0xFF},
+};
+
+/**
+ * ProgramFchHwAcpiResetP - Config SpreadSpectrum before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+ProgramFchHwAcpiResetP (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_RESET_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr;
+ StdHeader = &((AMD_RESET_PARAMS *)FchDataPtr)->StdHeader;
+
+ RwPmio (FCH_PMIOA_REGD3, AccessWidth8, (UINT32)~BIT4, 0, StdHeader);
+ RwPmio (FCH_PMIOA_REGD3, AccessWidth8, (UINT32)~BIT4, BIT4, StdHeader);
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGC8 + 3, AccessWidth8, 0x7F, BIT7, StdHeader);
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/HwAcpiEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/HwAcpiEnv.c
new file mode 100644
index 0000000..c8c878f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/HwAcpiEnv.c
@@ -0,0 +1,102 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch HwAcpi controller
+ *
+ * Init HwAcpi Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "amdlib.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_HWACPI_HWACPIENV_FILECODE
+
+/**
+ * FchInitEnvHwAcpiP - Config HwAcpi controller preliminary
+ * (Special)
+ * Acpi S3 resume won't execute this procedure (POST only)
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvHwAcpiP (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ RecordFchConfigPtr ( (UINT32) ((UINTN) (LocalCfgPtr)));
+
+ ValidateFchVariant (LocalCfgPtr);
+
+ ProgramEnvPFchAcpiMmio (FchDataPtr);
+
+ ProgramFchEnvSpreadSpectrum (FchDataPtr);
+}
+
+/**
+ * FchInitEnvHwAcpi - Config HwAcpi controller before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvHwAcpi (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ ProgramFchEnvHwAcpiPciReg (FchDataPtr);
+ //
+ // FCH Specific Function programming
+ //
+ ProgramSpecificFchInitEnvAcpiMmio (FchDataPtr);
+ HpetInit (LocalCfgPtr);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/HwAcpiLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/HwAcpiLate.c
new file mode 100644
index 0000000..db46136b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/HwAcpiLate.c
@@ -0,0 +1,167 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch HwAcpi controller
+ *
+ * Init HwAcpi Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "amdlib.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_HWACPI_HWACPILATE_FILECODE
+
+#define AMD_CPUID_APICID_LPC_BID 0x00000001ul // Local APIC ID, Logical Processor Count, Brand ID
+
+
+
+///
+/// PCI_IRQ_REG_BLOCK- FCH PCI IRQ registers block
+///
+typedef struct _PCI_IRQ_REG_BLOCK {
+ UINT8 PciIrqIndex; // PciIrqIndex - selects which PCI interrupt to map
+ UINT8 PciIrqData; // PciIrqData - Interrupt #
+} PCI_IRQ_REG_BLOCK;
+
+STATIC PCI_IRQ_REG_BLOCK FchInternalDeviceIrqForApicMode[] = {
+ { (FCH_IRQ_INTA | FCH_IRQ_IOAPIC), 0x10},
+ { (FCH_IRQ_INTB | FCH_IRQ_IOAPIC), 0x11},
+ { (FCH_IRQ_INTC | FCH_IRQ_IOAPIC), 0x12},
+ { (FCH_IRQ_INTD | FCH_IRQ_IOAPIC), 0x13},
+ { (FCH_IRQ_INTE | FCH_IRQ_IOAPIC), 0x14},
+ { (FCH_IRQ_INTF | FCH_IRQ_IOAPIC), 0x15},
+ { (FCH_IRQ_INTG | FCH_IRQ_IOAPIC), 0x16},
+ { (FCH_IRQ_INTH | FCH_IRQ_IOAPIC), 0x17},
+ { (FCH_IRQ_HDAUDIO | FCH_IRQ_IOAPIC), 0x10},
+ { (FCH_IRQ_GEC | FCH_IRQ_IOAPIC), 0x10},
+ { (FCH_IRQ_SD | FCH_IRQ_IOAPIC), 0x10},
+ { (FCH_IRQ_GPPINT0 | FCH_IRQ_IOAPIC), 0x10},
+ { (FCH_IRQ_IDE | FCH_IRQ_IOAPIC), 0x11},
+ { (FCH_IRQ_USB18INTB | FCH_IRQ_IOAPIC), 0x11},
+ { (FCH_IRQ_USB19INTB | FCH_IRQ_IOAPIC), 0x11},
+ { (FCH_IRQ_USB22INTB | FCH_IRQ_IOAPIC), 0x11},
+ { (FCH_IRQ_GPPINT1 + FCH_IRQ_IOAPIC), 0x11},
+ { (FCH_IRQ_USB18INTA | FCH_IRQ_IOAPIC), 0x12},
+ { (FCH_IRQ_USB19INTA | FCH_IRQ_IOAPIC), 0x12},
+ { (FCH_IRQ_USB22INTA | FCH_IRQ_IOAPIC), 0x12},
+ { (FCH_IRQ_USB20INTC | FCH_IRQ_IOAPIC), 0x12},
+ { (FCH_IRQ_GPPINT2 | FCH_IRQ_IOAPIC), 0x12},
+ { (FCH_IRQ_SATA | FCH_IRQ_IOAPIC), 0x13},
+ { (FCH_IRQ_GPPINT3 | FCH_IRQ_IOAPIC), 0x13},
+ };
+
+#define NUM_OF_DEVICE_FOR_APICIRQ sizeof (FchInternalDeviceIrqForApicMode) / sizeof (PCI_IRQ_REG_BLOCK)
+
+/**
+ * FchInitLateHwAcpi - Prepare HwAcpi controller to boot to OS.
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateHwAcpi (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+ UINT8 i;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ if ( IsGCPU (LocalCfgPtr) ) {
+ GcpuRelatedSetting (LocalCfgPtr);
+ } else {
+ }
+
+ // Mt C1E Enable
+
+
+ StressResetModeLate (LocalCfgPtr);
+ SbSleepTrapControl (FALSE);
+ for (i = 0; i < NUM_OF_DEVICE_FOR_APICIRQ; i++) {
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &FchInternalDeviceIrqForApicMode[i].PciIrqIndex, StdHeader);
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, &FchInternalDeviceIrqForApicMode[i].PciIrqData, StdHeader);
+ }
+}
+
+/**
+ * IsGCPU - Is Gcpu Cpu?
+ *
+ *
+ * @retval TRUE or FALSE
+ *
+ */
+BOOLEAN
+IsGCPU (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 ExtendedFamily;
+ UINT8 ExtendedModel;
+ UINT8 BaseFamily;
+ UINT8 BaseModel;
+ UINT8 Stepping;
+ UINT8 Family;
+ UINT8 Model;
+ CPUID_DATA CpuId;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ LibAmdCpuidRead (AMD_CPUID_APICID_LPC_BID, &CpuId, StdHeader);
+
+ ExtendedFamily = (UINT8) ((CpuId.EAX_Reg >> 20) & 0xff);
+ ExtendedModel = (UINT8) ((CpuId.EAX_Reg >> 16) & 0xf);
+ BaseFamily = (UINT8) ((CpuId.EAX_Reg >> 8) & 0xf);
+ BaseModel = (UINT8) ((CpuId.EAX_Reg >> 4) & 0xf);
+ Stepping = (UINT8) ((CpuId.EAX_Reg >> 0) & 0xf);
+ Family = BaseFamily + ExtendedFamily;
+ Model = (ExtendedModel << 4) + BaseModel;
+
+ if ( Family == 0x16 ) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/HwAcpiMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/HwAcpiMid.c
new file mode 100644
index 0000000..2f7656c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/HwAcpiMid.c
@@ -0,0 +1,64 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch HwAcpi controller
+ *
+ * Init HwAcpi Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "amdlib.h"
+#include "cpuServices.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_HWACPI_HWACPIMID_FILECODE
+
+/**
+ * FchInitMidHwAcpi - Config HwAcpi controller after PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidHwAcpi (
+ IN VOID *FchDataPtr
+ )
+{
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/HwAcpiReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/HwAcpiReset.c
new file mode 100644
index 0000000..5a3833e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/HwAcpi/HwAcpiReset.c
@@ -0,0 +1,213 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch HwAcpi controller
+ *
+ * Init HwAcpi Controller features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87999 $ @e \$Date: 2013-02-14 10:48:03 -0600 (Thu, 14 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_HWACPI_HWACPIRESET_FILECODE
+
+extern ACPI_REG_WRITE FchInitResetAcpiMmioTable[];
+
+/**
+ * FchInitResetHwAcpiP - Config HwAcpi controller ( Preliminary
+ * ) during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetHwAcpiP (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_RESET_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr;
+
+ StdHeader = &((AMD_RESET_PARAMS *)FchDataPtr)->StdHeader;
+
+ //
+ // Enabled (Mmio_mem_enable)
+ //
+ RwPmio (FCH_PMIOA_REG24, AccessWidth8, 0xFF, BIT0, StdHeader);
+
+ ProgramFchHwAcpiResetP (FchDataPtr);
+ RwPmio (0xD2, AccessWidth8, (UINT32)~BIT6, 0, StdHeader);
+}
+
+/**
+ * FchInitResetHwAcpi - Config HwAcpi controller during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetHwAcpi (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT16 SmbusBase;
+ UINT8 Value;
+ UINT16 AsfPort;
+ UINT32 GeventEnableBits;
+ UINT32 GeventValue;
+ FCH_RESET_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ //
+ // Set Build option into SB
+ //
+ WritePci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG64, AccessWidth16, &(UserOptions.FchBldCfg->CfgSioPmeBaseAddress), StdHeader);
+
+ //
+ // Enabled SMBUS0/SMBUS1 (ASF) Base Address
+ //
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG2C, AccessWidth16, 06, (UserOptions.FchBldCfg->CfgSmbus0BaseAddress) + BIT0); ///protect BIT[2:1]
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG28, AccessWidth16, 06, (UserOptions.FchBldCfg->CfgSmbus1BaseAddress) + BIT0);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG60, AccessWidth16, 00, (UserOptions.FchBldCfg->CfgAcpiPm1EvtBlkAddr));
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG62, AccessWidth16, 00, (UserOptions.FchBldCfg->CfgAcpiPm1CntBlkAddr));
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG64, AccessWidth16, 00, (UserOptions.FchBldCfg->CfgAcpiPmTmrBlkAddr));
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG66, AccessWidth16, 00, (UserOptions.FchBldCfg->CfgCpuControlBlkAddr));
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG68, AccessWidth16, 00, (UserOptions.FchBldCfg->CfgAcpiGpe0BlkAddr));
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG6A, AccessWidth16, 00, (UserOptions.FchBldCfg->CfgSmiCmdPortAddr));
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG6E, AccessWidth16, 00, (UserOptions.FchBldCfg->CfgSmiCmdPortAddr) + 8);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG48, AccessWidth32, 00, (UserOptions.FchBldCfg->CfgWatchDogTimerBase));
+
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG2E, AccessWidth8, (UINT32)~(BIT1 + BIT2), 0); ///clear BIT[2:1]
+ SmbusBase = (UINT16) (UserOptions.FchBldCfg->CfgSmbus0BaseAddress);
+ Value = 0x00;
+ LibAmdIoWrite (AccessWidth8, SmbusBase + 0x14, &Value, StdHeader);
+
+ ProgramFchAcpiMmioTbl ((ACPI_REG_WRITE*) (&FchInitResetAcpiMmioTable[0]), StdHeader);
+
+
+ if (UserOptions.FchBldCfg->CfgFchGpioControl != NULL) {
+ ProgramFchGpioTbl ((UserOptions.FchBldCfg->CfgFchGpioControl), LocalCfgPtr);
+ }
+
+ if (UserOptions.FchBldCfg->CfgFchSataPhyControl != NULL) {
+ ProgramFchSataPhyTbl ((UserOptions.FchBldCfg->CfgFchSataPhyControl), LocalCfgPtr);
+ }
+
+ //
+ // Prevent RTC error
+ //
+ Value = 0x0A;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REG70, &Value, StdHeader);
+ LibAmdIoRead (AccessWidth8, FCH_IOMAP_REG71, &Value, StdHeader);
+ Value &= 0xEF;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REG71, &Value, StdHeader);
+
+ Value = 0x08;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &Value, StdHeader);
+ LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGC01, &Value, StdHeader);
+ if ( !LocalCfgPtr->EcKbd ) {
+ //
+ // Route SIO IRQ1/IRQ12 to USB IRQ1/IRQ12 input
+ //
+ Value = Value | 0x0A;
+ }
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, &Value, StdHeader);
+
+ Value = 0x09;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &Value, StdHeader);
+ LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGC01, &Value, StdHeader);
+ if ( !LocalCfgPtr->EcKbd ) {
+ //
+ // Route SIO IRQ1/IRQ12 to USB IRQ1/IRQ12 input
+ //
+ Value = Value & 0xF9;
+ }
+
+ if ( LocalCfgPtr->LegacyFree ) {
+ //
+ // Disable IRQ1/IRQ12 filter enable for Legacy free with USB KBC emulation.
+ //
+ Value = Value & 0x9F;
+ }
+ //
+ // Enabled IRQ input
+ //
+ Value = Value | BIT4;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, &Value, StdHeader);
+
+ AsfPort = ((UINT16) UserOptions.FchBldCfg->CfgSmbus1BaseAddress & 0xFFF0);
+ if ( AsfPort != 0 ) {
+ UINT8 dbValue;
+ dbValue = 0x70;
+ LibAmdIoWrite (AccessWidth8, AsfPort + 0x0E, &dbValue, StdHeader);
+ dbValue = 0x2F;
+ LibAmdIoWrite (AccessWidth8, AsfPort + 0x0A, &dbValue, StdHeader);
+ }
+ //
+ // PciExpWakeStatus workaround
+ //
+ ReadMem (ACPI_MMIO_BASE + SMI_BASE + FCH_SMI_REG04, AccessWidth32, &GeventEnableBits);
+ ReadMem (ACPI_MMIO_BASE + SMI_BASE + FCH_SMI_REG00, AccessWidth32, &GeventValue);
+ if ( (GeventValue & GeventEnableBits) != 0 ) {
+ Value = 0x40;
+ LibAmdIoWrite (AccessWidth8, AsfPort, &Value, StdHeader);
+ }
+ ReadMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG60, AccessWidth16, &AsfPort);
+ AsfPort++;
+ LibAmdIoRead (AccessWidth8, AsfPort, &Value, StdHeader);
+ if ((Value & (BIT2 + BIT0)) != 0) {
+ Value = 0x40;
+ LibAmdIoWrite (AccessWidth8, AsfPort, &Value, StdHeader);
+ }
+ //
+ // Set ACPIMMIO by OEM Input table
+ //
+ if ( LocalCfgPtr->OemResetProgrammingTablePtr != NULL ) {
+ ProgramFchAcpiMmioTbl ((ACPI_REG_WRITE *) (LocalCfgPtr->OemResetProgrammingTablePtr), StdHeader);
+ }
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Hwm/Family/Yangtze/YangtzeHwmEnvService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Hwm/Family/Yangtze/YangtzeHwmEnvService.c
new file mode 100644
index 0000000..ea4ee73
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Hwm/Family/Yangtze/YangtzeHwmEnvService.c
@@ -0,0 +1,87 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config FCH Hwm controller
+ *
+ * Init Hwm Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_HWM_FAMILY_YANGTZE_YANGTZEHWMENVSERVICE_FILECODE
+
+
+/**
+ * HwmInitRegister - Init Hardware Monitor Register.
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+HwmInitRegister (
+ IN VOID *FchDataPtr
+ )
+{
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0xB2, AccessWidth8, 0, 0x55);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0xB3, AccessWidth8, 0, 0x55);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0x91, AccessWidth8, 0, 0x55);
+
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0x00, AccessWidth8, 0, 0x06);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0x10, AccessWidth8, 0, 0x06);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0x20, AccessWidth8, 0, 0x06);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0x30, AccessWidth8, 0, 0x06);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0x40, AccessWidth8, 0, 0x06);
+
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0x66, AccessWidth8, 0, 0x01);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0x6B, AccessWidth8, 0, 0x01);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0x70, AccessWidth8, 0, 0x01);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0x75, AccessWidth8, 0, 0x01);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0x7A, AccessWidth8, 0, 0x01);
+
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0xE6, AccessWidth8, 0xff, 0x02);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0xF8, AccessWidth8, 0, 0x05);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0xF9, AccessWidth8, 0, 0x06);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0xFF, AccessWidth8, 0, 0x42);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0xE9, AccessWidth8, 0, 0xFF);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0xEB, AccessWidth8, 0, 0x1F);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0xEF, AccessWidth8, 0, 0x04);
+ RwMem (ACPI_MMIO_BASE + PMIO2_BASE + 0xFB, AccessWidth8, 0, 0x00);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0xB6, AccessWidth8, 0x0F, 0x00);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Hwm/Family/Yangtze/YangtzeHwmLateService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Hwm/Family/Yangtze/YangtzeHwmLateService.c
new file mode 100644
index 0000000..f26dfc9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Hwm/Family/Yangtze/YangtzeHwmLateService.c
@@ -0,0 +1,189 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config FCH Hwm controller
+ *
+ * Init Hwm Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_HWM_FAMILY_YANGTZE_YANGTZEHWMLATESERVICE_FILECODE
+
+/**
+ * Table for Function Number
+ *
+ *
+ *
+ *
+ */
+STATIC UINT8 FunctionNumber[] =
+{
+ Fun_81,
+ Fun_83,
+ Fun_85,
+ Fun_89,
+};
+
+/**
+ * Table for Max Thermal Zone
+ *
+ *
+ *
+ *
+ */
+UINT8 MaxZone[] =
+{
+ 4,
+ 4,
+ 4,
+ 4,
+};
+
+
+/**
+ * Table for Max Register
+ *
+ *
+ *
+ *
+ */
+UINT8 MaxRegister[] =
+{
+ MSG_REG9,
+ MSG_REGB,
+ MSG_REG9,
+ MSG_REGA,
+};
+
+/*-------------------------------------------------------------------------------
+;Procedure: IsZoneFuncEnable
+;
+;Description: This routine will check every zone support function with BitMap from user define
+;
+;
+;Exit: None
+;
+;Modified: None
+;
+;-----------------------------------------------------------------------------
+*/
+STATIC BOOLEAN
+IsZoneFuncEnable (
+ IN UINT16 Flag,
+ IN UINT8 func,
+ IN UINT8 Zone
+ )
+{
+ return (BOOLEAN) (((Flag >> (func *4)) & 0xF) & ((UINT8 )1 << Zone));
+}
+
+/*-------------------------------------------------------------------------------
+;Procedure: FchECfancontrolservice
+;
+;Description: This routine service EC fan policy
+;
+;
+;Exit: None
+;
+;Modified: None
+;
+;-----------------------------------------------------------------------------
+*/
+VOID
+FchECfancontrolservice (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 ZoneNum;
+ UINT8 FunNum;
+ UINT8 RegNum;
+ UINT8 *CurPoint;
+ UINT8 FunIndex;
+ BOOLEAN IsSendEcMsg;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ if (!IsImcEnabled (StdHeader)) {
+ return; //IMC is not enabled
+ }
+
+ CurPoint = &LocalCfgPtr->Imc.EcStruct.MsgFun81Zone0MsgReg0 + MaxZone[0] * (MaxRegister[0] - MSG_REG0 + 1);
+
+ for ( FunIndex = 1; FunIndex <= 3; FunIndex++ ) {
+ FunNum = FunctionNumber[FunIndex];
+ for ( ZoneNum = 0; ZoneNum < MaxZone[FunIndex]; ZoneNum++ ) {
+ IsSendEcMsg = IsZoneFuncEnable (LocalCfgPtr->Imc.EcStruct.IMCFUNSupportBitMap, FunIndex, ZoneNum);
+ if (IsSendEcMsg) {
+ for ( RegNum = MSG_REG0; RegNum <= MaxRegister[FunIndex]; RegNum++ ) {
+ WriteECmsg (RegNum, AccessWidth8, CurPoint, StdHeader);
+ CurPoint += 1;
+ }
+ WriteECmsg (MSG_SYS_TO_IMC, AccessWidth8, &FunNum, StdHeader); // function number
+ WaitForEcLDN9MailboxCmdAck (StdHeader);
+ } else {
+ CurPoint += (MaxRegister[FunIndex] - MSG_REG0 + 1);
+ }
+ }
+ }
+
+ CurPoint = &LocalCfgPtr->Imc.EcStruct.MsgFun81Zone0MsgReg0;
+ for ( FunIndex = 0; FunIndex <= 0; FunIndex++ ) {
+ FunNum = FunctionNumber[FunIndex];
+ for ( ZoneNum = 0; ZoneNum < MaxZone[FunIndex]; ZoneNum++ ) {
+ IsSendEcMsg = IsZoneFuncEnable (LocalCfgPtr->Imc.EcStruct.IMCFUNSupportBitMap, FunIndex, ZoneNum);
+ if (IsSendEcMsg) {
+ for ( RegNum = MSG_REG0; RegNum <= MaxRegister[FunIndex]; RegNum++ ) {
+ if (RegNum == MSG_REG2) {
+ *CurPoint &= 0xFE;
+ }
+ WriteECmsg (RegNum, AccessWidth8, CurPoint, StdHeader);
+ CurPoint += 1;
+ }
+ WriteECmsg (MSG_SYS_TO_IMC, AccessWidth8, &FunNum, StdHeader); // function number
+ WaitForEcLDN9MailboxCmdAck (StdHeader);
+ } else {
+ CurPoint += (MaxRegister[FunIndex] - MSG_REG0 + 1);
+ }
+ }
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Hwm/HwmLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Hwm/HwmLate.c
new file mode 100644
index 0000000..0adfd48
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Hwm/HwmLate.c
@@ -0,0 +1,74 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config FCH Hwm controller
+ *
+ * Init Hwm Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87213 $ @e \$Date: 2013-01-30 15:37:54 -0600 (Wed, 30 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_HWM_HWMLATE_FILECODE
+
+
+/**
+ * FchInitLateHwm - Prepare Hwm controller to boot to OS.
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateHwm (
+ IN VOID *FchDataPtr
+ );
+
+VOID
+FchInitLateHwm (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ HwmInitRegister (LocalCfgPtr);
+ ImcWakeup (LocalCfgPtr);
+ FchECfancontrolservice (LocalCfgPtr);
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Ide/IdeEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Ide/IdeEnv.c
new file mode 100644
index 0000000..16d9eff
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Ide/IdeEnv.c
@@ -0,0 +1,63 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch IDE controller
+ *
+ * Init IDE Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_IDE_IDEENV_FILECODE
+
+/**
+ * FchInitEnvIde - Config Ide controller before PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvIde (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Ide/IdeLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Ide/IdeLate.c
new file mode 100644
index 0000000..2e2099d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Ide/IdeLate.c
@@ -0,0 +1,59 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch IDE controller
+ *
+ * Init IDE Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_IDE_IDELATE_FILECODE
+/**
+ * FchInitLateIde - Prepare IDE controller to boot to OS.
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateIde (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Ide/IdeMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Ide/IdeMid.c
new file mode 100644
index 0000000..cc4e088
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Ide/IdeMid.c
@@ -0,0 +1,61 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch IDE controller
+ *
+ * Init IDE Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_IDE_IDEMID_FILECODE
+
+/**
+ * FchInitMidIde - Config IDE controller after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidIde (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/Family/Yangtze/YangtzeImcService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/Family/Yangtze/YangtzeImcService.c
new file mode 100644
index 0000000..c176d1e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/Family/Yangtze/YangtzeImcService.c
@@ -0,0 +1,97 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Imc controller
+ *
+ * Init Imc Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87213 $ @e \$Date: 2013-01-30 15:37:54 -0600 (Wed, 30 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_IMC_FAMILY_YANGTZE_YANGTZEIMCSERVICE_FILECODE
+
+//
+// Declaration of local functions
+//
+
+
+/**
+ * SoftwareToggleImcStrapping - Software Toggle IMC Firmware Strapping.
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+SoftwareToggleImcStrapping (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 ValueByte;
+ AMD_CONFIG_PARAMS *StdHeader;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ StdHeader = ((FCH_DATA_BLOCK *) FchDataPtr)->StdHeader;
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ if ( LocalCfgPtr->Imc.ImcEnableOverWrite == 1 ) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGD6 + 1, AccessWidth8, 0x7F, BIT7);
+
+ ValueByte = 0x0;
+ while (ValueByte == 0) {
+ FchStall (10000, StdHeader);
+ ReadPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG40, AccessWidth8, &ValueByte, StdHeader);
+ ValueByte &= 0x80;
+ };
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGC4, AccessWidth8, 0xF7, 0x08);
+
+ EnterEcConfig (StdHeader);
+ RwEc8 (FCH_EC_REG07, 0x00, 0x09, StdHeader); ///switch to device 9 (Mailbox)
+ RwEc8 (FCH_EC_REG60, 0x00, (MailBoxPort >> 8), StdHeader); ///set MSB of Mailbox port
+ RwEc8 (FCH_EC_REG61, 0x00, (MailBoxPort & 0xFF), StdHeader); ///set LSB of Mailbox port
+ RwEc8 (FCH_EC_REG30, 0x00, 0x01, StdHeader); ///;Enable Mailbox Registers Interface, bit0=1
+
+ RwMem (ACPI_MMIO_BASE + SMI_BASE + FCH_SMI_REGB3, AccessWidth8, (UINT32)~BIT6, BIT6);
+ ExitEcConfig (StdHeader);
+
+ ImcSleep (FchDataPtr);
+ } else {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGD6 + 1, AccessWidth8, 0x7F, 0);
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/FchEcEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/FchEcEnv.c
new file mode 100644
index 0000000..e187900
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/FchEcEnv.c
@@ -0,0 +1,185 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH Embedded Controller
+ *
+ * Init Ec Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_IMC_FCHECENV_FILECODE
+
+
+/**
+ * FchInitEnvEc - Config Ec controller before PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvEc (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * EnterEcConfig - Force EC into Config mode
+ *
+ *
+ *
+ *
+ */
+VOID
+EnterEcConfig (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 EcIndexPortDword;
+ UINT8 FchEcData8;
+
+ ReadPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGA4, AccessWidth16, &EcIndexPortDword, StdHeader);
+ EcIndexPortDword &= ~(BIT0);
+ FchEcData8 = FCH_EC_ENTER_CONFIG;
+ LibAmdIoWrite (AccessWidth8, EcIndexPortDword, &FchEcData8, StdHeader);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * ExitEcConfig - Force EC exit Config mode
+ *
+ *
+ *
+ *
+ */
+VOID
+ExitEcConfig (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 EcIndexPortDword;
+ UINT8 FchEcData8;
+
+ ReadPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGA4, AccessWidth16, &EcIndexPortDword, StdHeader);
+ EcIndexPortDword &= ~(BIT0);
+ FchEcData8 = FCH_EC_EXIT_CONFIG;
+ LibAmdIoWrite (AccessWidth8, EcIndexPortDword, &FchEcData8, StdHeader);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * ReadEc8 - Read EC register data
+ *
+ *
+ *
+ * @param[in] Address - EC Register Offset Value
+ * @param[in] Value - Read Data Buffer
+ * @param[in] StdHeader
+ *
+ */
+VOID
+ReadEc8 (
+ IN UINT8 Address,
+ IN UINT8 *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 EcIndexPortDword;
+
+ ReadPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGA4, AccessWidth16, &EcIndexPortDword, StdHeader);
+ EcIndexPortDword &= ~(BIT0);
+ LibAmdIoWrite (AccessWidth8, EcIndexPortDword, &Address, StdHeader);
+ LibAmdIoRead (AccessWidth8, EcIndexPortDword + 1, Value, StdHeader);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * RwEc8 - Read/Write EC register
+ *
+ *
+ *
+ * @param[in] Address - EC Register Offset Value
+ * @param[in] AndMask - Data And Mask 8 bits
+ * @param[in] OrMask - Data OR Mask 8 bits
+ * @param[in] StdHeader
+ *
+ */
+VOID
+RwEc8 (
+ IN UINT8 Address,
+ IN UINT8 AndMask,
+ IN UINT8 OrMask,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 Result;
+
+ ReadEc8 (Address, &Result, StdHeader);
+ Result = (Result & AndMask) | OrMask;
+ WriteEc8 (Address, &Result, StdHeader);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * WriteEc8 - Write date into EC register
+ *
+ *
+ *
+ * @param[in] Address - EC Register Offset Value
+ * @param[in] Value - Write Data Buffer
+ * @param[in] StdHeader
+ *
+ */
+VOID
+WriteEc8 (
+ IN UINT8 Address,
+ IN UINT8 *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 EcIndexPortDword;
+
+ ReadPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGA4, AccessWidth16, &EcIndexPortDword, StdHeader);
+ EcIndexPortDword &= ~(BIT0);
+ LibAmdIoWrite (AccessWidth8, EcIndexPortDword, &Address, StdHeader);
+ LibAmdIoWrite (AccessWidth8, EcIndexPortDword + 1, Value, StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/FchEcLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/FchEcLate.c
new file mode 100644
index 0000000..8bdb4c2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/FchEcLate.c
@@ -0,0 +1,61 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH Embedded Controller
+ *
+ * Init Ec Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_IMC_FCHECLATE_FILECODE
+
+/**
+ * FchInitLateEc - Prepare Ec controller to boot to OS.
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateEc (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/FchEcMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/FchEcMid.c
new file mode 100644
index 0000000..c1a7ecd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/FchEcMid.c
@@ -0,0 +1,61 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH Embedded Controller
+ *
+ * Init Ec Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_IMC_FCHECMID_FILECODE
+
+/**
+ * FchInitMidIde - Config Ec controller after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidEc (
+ IN VOID *FchDataPtr
+ )
+{
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcEnv.c
new file mode 100644
index 0000000..73d12c0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcEnv.c
@@ -0,0 +1,140 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Imc controller
+ *
+ * Init Imc Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87213 $ @e \$Date: 2013-01-30 15:37:54 -0600 (Wed, 30 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_IMC_IMCENV_FILECODE
+
+
+//
+// Declaration of local functions
+//
+
+
+/**
+ * FchInitEnvImc - Config Imc controller before PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvImc (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ SoftwareToggleImcStrapping (LocalCfgPtr);
+ FchInitEnvEc (LocalCfgPtr);
+}
+
+/**
+ * ValidateImcFirmware - Validate IMC Firmware.
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ * @retval TRUE Pass
+ * @retval FALSE Failed
+ */
+BOOLEAN
+ValidateImcFirmware (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 ImcSig;
+ UINT32 ImcSigAddr;
+ UINT32 ImcAddr;
+ UINT32 CurAddr;
+ UINT32 ImcBinSig0;
+ UINT32 ImcBinSig1;
+ UINT16 ImcBinSig2;
+ UINT8 IMCChecksumeByte;
+ UINT8 IMCByte;
+
+ ImcAddr = 0;
+
+ //
+ // Software IMC enable
+ //
+ ImcSigAddr = 0x80000; /// start from 512k to 64M
+ ImcSig = 0x0;
+
+ while ( ( ImcSig != FCH_IMC_ROMSIG ) && ( ImcSigAddr <= 0x4000000 ) ) {
+ CurAddr = 0xffffffff - ImcSigAddr + 0x20001;
+ ReadMem (CurAddr, AccessWidth32, &ImcSig);
+ ReadMem ((CurAddr + 4), AccessWidth32, &ImcAddr);
+ ImcSigAddr <<= 1;
+ }
+
+ IMCChecksumeByte = 0xff;
+
+ if ( ImcSig == FCH_IMC_ROMSIG ) {
+ //
+ // "_AMD_IMC_C" at offset 0x2000 of the binary
+ //
+ ReadMem ((ImcAddr + 0x2000), AccessWidth32, &ImcBinSig0);
+ ReadMem ((ImcAddr + 0x2004), AccessWidth32, &ImcBinSig1);
+ ReadMem ((ImcAddr + 0x2008), AccessWidth16, &ImcBinSig2);
+
+ if ((ImcBinSig0 == 0x444D415F) && (ImcBinSig1 == 0x434D495F) && (ImcBinSig2 == 0x435F) ) {
+ IMCChecksumeByte = 0;
+
+ for ( CurAddr = ImcAddr; CurAddr < ImcAddr + 0x10000; CurAddr++ ) {
+ ReadMem (CurAddr, AccessWidth8, &IMCByte);
+ IMCChecksumeByte = IMCChecksumeByte + IMCByte;
+ }
+ }
+ }
+
+ if ( IMCChecksumeByte ) {
+ return FALSE;
+ } else {
+ return TRUE;
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcLate.c
new file mode 100644
index 0000000..340da0f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcLate.c
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Imc controller
+ *
+ * Init Imc Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_IMC_IMCLATE_FILECODE
+
+/**
+ * FchInitLateImc - Prepare Imc controller to boot to OS.
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateImc (
+ IN VOID *FchDataPtr
+ )
+{
+ FchInitLateEc (FchDataPtr);
+}
+
+/**
+ * ImcDisarmSurebootTimer - IMC Disarm Sureboot Timer.
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+ImcDisarmSurebootTimer (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ ImcDisableSurebootTimer (LocalCfgPtr);
+ LocalCfgPtr->Imc.ImcSureBootTimer = 0;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcLib.c
new file mode 100644
index 0000000..44fe2cd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcLib.c
@@ -0,0 +1,314 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH IMC lib
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87213 $ @e \$Date: 2013-01-30 15:37:54 -0600 (Wed, 30 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_IMC_IMCLIB_FILECODE
+
+/**
+ * WriteECmsg
+ *
+ *
+ *
+ * @param[in] Address - Address
+ * @param[in] OpFlag - Access width
+ * @param[in] *Value - Out Value pointer
+ * @param[in] StdHeader
+ *
+ */
+VOID
+WriteECmsg (
+ IN UINT8 Address,
+ IN UINT8 OpFlag,
+ IN VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 Index;
+
+ OpFlag = OpFlag & 0x7f;
+ if (OpFlag == 0x02) {
+ OpFlag = 0x03;
+ }
+
+ for (Index = 0; Index <= OpFlag; Index++) {
+ /// EC_LDN9_MAILBOX_BASE_ADDRESS
+ LibAmdIoWrite (AccessWidth8, MailBoxPort, &Address, StdHeader);
+ Address++;
+ /// EC_LDN9_MAILBOX_BASE_ADDRESS
+ LibAmdIoWrite (AccessWidth8, MailBoxPort + 1, (UINT8 *)Value + Index, StdHeader);
+ }
+}
+
+/**
+ * ReadECmsg
+ *
+ *
+ *
+ * @param[in] Address - Address
+ * @param[in] OpFlag - Access width
+ * @param[out] *Value - Out Value pointer
+ * @param[in] StdHeader
+ *
+ */
+VOID
+ReadECmsg (
+ IN UINT8 Address,
+ IN UINT8 OpFlag,
+ OUT VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 Index;
+
+ OpFlag = OpFlag & 0x7f;
+ if (OpFlag == 0x02) {
+ OpFlag = 0x03;
+ }
+
+ for (Index = 0; Index <= OpFlag; Index++) {
+ /// EC_LDN9_MAILBOX_BASE_ADDRESS
+ LibAmdIoWrite (AccessWidth8, MailBoxPort, &Address, StdHeader);
+ Address++;
+ /// EC_LDN9_MAILBOX_BASE_ADDRESS
+ LibAmdIoRead (AccessWidth8, MailBoxPort + 1, (UINT8 *)Value + Index, StdHeader);
+ }
+}
+
+/**
+ * WaitForEcLDN9MailboxCmdAck
+ *
+ *
+ * @param[in] StdHeader
+ *
+ */
+VOID
+WaitForEcLDN9MailboxCmdAck (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 Msgdata;
+ UINT16 Delaytime;
+
+ Msgdata = 0;
+
+ for (Delaytime = 0; Delaytime < 0xFFFF; Delaytime++) {
+ ReadECmsg (MSG_REG0, AccessWidth8, &Msgdata, StdHeader);
+ if ( Msgdata == 0xfa) {
+ break;
+ }
+
+ FchStall (5, StdHeader); /// Wait for 1ms
+ }
+}
+
+/**
+ * ImcSleep - IMC Sleep.
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+ImcSleep (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 Msgdata;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ if (!(IsImcEnabled (StdHeader)) ) {
+ return; ///IMC is not enabled
+ }
+
+ Msgdata = 0x00;
+ WriteECmsg (MSG_REG0, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0xB4;
+ WriteECmsg (MSG_REG1, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0x00;
+ WriteECmsg (MSG_REG2, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0x96;
+ WriteECmsg (MSG_SYS_TO_IMC, AccessWidth8, &Msgdata, StdHeader);
+ WaitForEcLDN9MailboxCmdAck (StdHeader);
+}
+
+
+/**
+ * ImcEnableSurebootTimer - IMC Enable Sureboot Timer.
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+ImcEnableSurebootTimer (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 Msgdata;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ ImcDisableSurebootTimer (LocalCfgPtr);
+
+ Msgdata = 0x00;
+
+ if (!(IsImcEnabled (StdHeader)) || (LocalCfgPtr->Imc.ImcSureBootTimer == 0)) {
+ return; ///IMC is not enabled
+ }
+
+ ImcWakeup (FchDataPtr);
+ WriteECmsg (MSG_REG0, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0x01;
+ WriteECmsg (MSG_REG1, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = ( (LocalCfgPtr->Imc.ImcSureBootTimer) << 6) -1;
+ WriteECmsg (MSG_REG2, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0x94;
+ WriteECmsg (MSG_SYS_TO_IMC, AccessWidth8, &Msgdata, StdHeader);
+ WaitForEcLDN9MailboxCmdAck (StdHeader);
+ ImcSleep (FchDataPtr);
+}
+
+/**
+ * ImcDisableSurebootTimer - IMC Disable Sureboot Timer.
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+ImcDisableSurebootTimer (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 Msgdata;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ StdHeader = ((FCH_DATA_BLOCK *) FchDataPtr)->StdHeader;
+
+ if (!(IsImcEnabled (StdHeader)) ) {
+ return; ///IMC is not enabled
+ }
+
+ ImcWakeup (FchDataPtr);
+ Msgdata = 0x00;
+ WriteECmsg (MSG_REG0, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0x01;
+ WriteECmsg (MSG_REG1, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0x00;
+ WriteECmsg (MSG_REG2, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0x94;
+ WriteECmsg (MSG_SYS_TO_IMC, AccessWidth8, &Msgdata, StdHeader);
+ WaitForEcLDN9MailboxCmdAck (StdHeader);
+ ImcSleep (FchDataPtr);
+}
+
+/**
+ * ImcWakeup - IMC Wakeup.
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+ImcWakeup (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 Msgdata;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ StdHeader = ((FCH_DATA_BLOCK *) FchDataPtr)->StdHeader;
+ if (!(IsImcEnabled (StdHeader)) ) {
+ return; ///IMC is not enabled
+ }
+
+ Msgdata = 0x00;
+ WriteECmsg (MSG_REG0, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0xB5;
+ WriteECmsg (MSG_REG1, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0x00;
+ WriteECmsg (MSG_REG2, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0x96;
+ WriteECmsg (MSG_SYS_TO_IMC, AccessWidth8, &Msgdata, StdHeader);
+ WaitForEcLDN9MailboxCmdAck (StdHeader);
+}
+
+/**
+ * ImcIdle - IMC Idle.
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+ImcIdle (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 Msgdata;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ StdHeader = ((FCH_DATA_BLOCK *) FchDataPtr)->StdHeader;
+
+ if (!(IsImcEnabled (StdHeader)) ) {
+ return; ///IMC is not enabled
+ }
+
+ Msgdata = 0x00;
+ WriteECmsg (MSG_REG0, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0x01;
+ WriteECmsg (MSG_REG1, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0x00;
+ WriteECmsg (MSG_REG2, AccessWidth8, &Msgdata, StdHeader);
+ Msgdata = 0x98;
+ WriteECmsg (MSG_SYS_TO_IMC, AccessWidth8, &Msgdata, StdHeader);
+ WaitForEcLDN9MailboxCmdAck (StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcMid.c
new file mode 100644
index 0000000..6374c42
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcMid.c
@@ -0,0 +1,62 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Imc controller
+ *
+ * Init Imc Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_IMC_IMCMID_FILECODE
+
+/**
+ * FchInitMidImc - Config Imc controller after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidImc (
+ IN VOID *FchDataPtr
+ )
+{
+ FchInitMidEc (FchDataPtr);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcReset.c
new file mode 100644
index 0000000..b9aee7b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Imc/ImcReset.c
@@ -0,0 +1,67 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Imc controller
+ *
+ * Init Imc Controller features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87213 $ @e \$Date: 2013-01-30 15:37:54 -0600 (Wed, 30 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_IMC_IMCRESET_FILECODE
+
+/**
+ * FchInitResetImc - Config Imc controller during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetImc (
+ IN VOID *FchDataPtr
+ )
+{
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ StdHeader = &((AMD_RESET_PARAMS *)FchDataPtr)->StdHeader;
+ if ((ReadFchSleepType (StdHeader) != ACPI_SLPTYP_S3)) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGD6 + 1, AccessWidth8, 0x7F, 0);
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/Family/Yangtze/EnvDefYangtze.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/Family/Yangtze/EnvDefYangtze.c
new file mode 100644
index 0000000..888b83c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/Family/Yangtze/EnvDefYangtze.c
@@ -0,0 +1,359 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Graphics Controller family specific service procedure
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 79969 $ @e \$Date: 2012-10-16 00:17:15 -0500 (Tue, 16 Oct 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "FchPlatform.h"
+#include "Filecode.h"
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * Default FCH interface settings at InitEnv phase.
+ *----------------------------------------------------------------------------------------
+ */
+CONST FCH_INTERFACE ROMDATA FchInterfaceDefault = {
+ SdAmda, // SdConfig
+ 2,
+ IrRxTx0Tx1, // IrConfig
+ TRUE, // UmiGen2
+ SataAhci, //SataNativeIde, //simnow, // SataClass
+ TRUE, // SataEnable
+ TRUE, // IdeEnable
+ TRUE, // SataIdeMode
+ TRUE, // Ohci1Enable
+ TRUE, // Ohci2Enable
+ TRUE, // Ohci3Enable
+ TRUE, // Ohci4Enable
+ TRUE, // XhciSwitch
+ FALSE, // GppEnable
+ AlwaysOff // FchPowerFail
+};
+
+
+/*----------------------------------------------------------------
+ * InitEnv Phase Data Block Default (Failsafe)
+ *----------------------------------------------------------------
+ */
+FCH_DATA_BLOCK InitEnvCfgDefault = {
+ NULL, // StdHeader
+
+ { // FCH_ACPI
+ 0xB00, // Smbus0BaseAddress
+ 0xB20, // Smbus1BaseAddress
+ 0xE00, // SioPmeBaseAddress
+ 0xFEC000F0, // WatchDogTimerBase
+ 0x800, // AcpiPm1EvtBlkAddr
+ 0x804, // AcpiPm1CntBlkAddr
+ 0x808, // AcpiPmTmrBlkAddr
+ 0x810, // CpuControlBlkAddr
+ 0x820, // AcpiGpe0BlkAddr
+ 0x00B0, // SmiCmdPortAddr
+ 0xFE00, // AcpiPmaCntBlkAddr
+ TRUE, // AnyHt200MhzLink
+ TRUE, // SpreadSpectrum
+ AlwaysOff, // PwrFailShadow
+ 0, // StressResetMode
+ FALSE, // MtC1eEnable
+ NULL // OemProgrammingTablePtr
+ },
+
+ { // FCH_AB
+ TRUE, // AbMsiEnable
+ 0, // ALinkClkGateOff
+ 0, // BLinkClkGateOff
+ 0, // AbClockGating
+ 0, // GppClockGating
+ 0, // UmiL1TimerOverride
+ 0, // UmiLinkWidth
+ 0, // UmiDynamicSpeedChange
+ 0, // PcieRefClockOverClocking
+ 0, // UmiGppTxDriverStrength
+ TRUE, // NbSbGen2
+ 0, // FchPcieOrderRule
+ 0, // SlowSpeedAbLinkClock
+ 0, // ResetCpuOnSyncFlood
+ FALSE, // AbDmaMemoryWrtie3264B
+ FALSE, // AbMemoryPowerSaving
+ FALSE, // SbgDmaMemoryWrtie3264ByteCount
+ FALSE // SbgMemoryPowerSaving
+ },
+
+ {{{0}}}, // FCH_GPP
+
+ { // FCH_USB
+ TRUE, // Ohci1Enable
+ TRUE, // Ohci2Enable
+ TRUE, // Ohci3Enable
+ TRUE, // Ohci4Enable
+ TRUE, // Ehci1Enable
+ TRUE, // Ehci2Enable
+ TRUE, // Ehci3Enable
+ TRUE, // Xhci0Enable
+ TRUE, // Xhci1Enable
+ TRUE, // UsbMsiEnable
+ 0, // OhciSsid
+ 0, // Ohci4Ssid
+ 0, // EhciSsid
+ 0, // XhciSsid
+ FALSE, // UsbPhyPowerDown
+ 0, // UserDefineXhciRomAddr
+ {0x21, 0x21, 0x21, 0x21, 0x22}, // Ehci18Phy
+ {0x22, 0x22, 0x22, 0x21, 0x21}, // Ehci19Phy
+ {0x21, 0x21, 0x21, 0x21}, // Ehci22Phy
+ {0x24, 0x24, 0x21, 0x21} // Xhci20Phy
+ },
+
+ { // FCH_SATA
+ FALSE, // SataMsiEnable
+ 0x00000000, // SataIdeSsid
+ 0x00000000, // SataRaidSsid
+ 0x00000000, // SataRaid5Ssid
+ 0x00000000, // SataAhciSsid
+ { // SATA_ST
+ 0, // SataModeReg
+ TRUE, // SataEnable
+ 0, // Sata6AhciCap
+ TRUE, // SataSetMaxGen2
+ FALSE, // IdeEnable
+ 01, // SataClkMode
+ },
+ SataAhci, // SataClass
+ 1, // SataIdeMode
+ 0, // SataDisUnusedIdePChannel
+ 0, // SataDisUnusedIdeSChannel
+ 0, // IdeDisUnusedIdePChannel
+ 0, // IdeDisUnusedIdeSChannel
+ 0, // SataOptionReserved
+ { // SATA_PORT_ST
+ 0, // SataPortReg
+ FALSE, // Port0
+ FALSE, // Port1
+ FALSE, // Port2
+ FALSE, // Port3
+ FALSE, // Port4
+ FALSE, // Port5
+ FALSE, // Port6
+ FALSE, // Port7
+ },
+ { // SATA_PORT_ST
+ 0, // SataPortReg
+ FALSE, // Port0
+ FALSE, // Port1
+ FALSE, // Port2
+ FALSE, // Port3
+ FALSE, // Port4
+ FALSE, // Port5
+ FALSE, // Port6
+ FALSE, // Port7
+ },
+ { // SATA_PORT_MD
+ 0, // SataPortMode
+ 0, // Port0
+ 0, // Port1
+ 0, // Port2
+ 0, // Port3
+ 0, // Port4
+ 0, // Port5
+ 0, // Port6
+ 0, // Port7
+ },
+ 0, // SataAggrLinkPmCap
+ 1, // SataPortMultCap
+ 0, // SataClkAutoOff
+ 0, // SataPscCap
+ 0, // BiosOsHandOff
+ 0, // SataFisBasedSwitching
+ 0, // SataCccSupport
+ 0, // SataSscCap
+ 0, // SataMsiCapability
+ 0, // SataForceRaid
+ 0, // SataInternal100Spread
+ 0, // SataDebugDummy
+ 0, // SataTargetSupport8Device
+ 0, // SataDisableGenericMode
+ FALSE, // SataAhciEnclosureManagement
+ 0, // SataSgpio0
+ 0, // SataSgpio1
+ 0, // SataPhyPllShutDown
+ TRUE, // SataHotRemovalEnh
+ { // SATA_PORT_ST
+ 0, // SataPortReg
+ FALSE, // Port0
+ FALSE, // Port1
+ FALSE, // Port2
+ FALSE, // Port3
+ FALSE, // Port4
+ FALSE, // Port5
+ FALSE, // Port6
+ FALSE, // Port7
+ },
+ FALSE, // SataOobDetectionEnh
+ FALSE, // SataPowerSavingEnh
+ 0, // SataMemoryPowerSaving
+ FALSE, // SataRasSupport
+ FALSE, // SataAhciDisPrefetchFunction
+ TRUE, // SataDevSlpPort0
+ TRUE, // SataDevSlpPort1
+ 0 // TempMmio
+ },
+
+ { // FCH_SMBUS
+ 0x00000000 // SmbusSsid
+ },
+
+ { // FCH_IDE
+ TRUE, // IdeEnable
+ FALSE, // IdeMsiEnable
+ 0x00000000 // IdeSsid
+ },
+
+ { // FCH_AZALIA
+ 2, // AzaliaEnable
+ TRUE, // AzaliaMsiEnable
+ 0x00000000, // AzaliaSsid
+ 1, // AzaliaPinCfg
+ 0, // AzaliaFrontPanel
+ 0, // FrontPanelDetected
+ 0, // AzaliaSnoop
+ 0, // AzaliaDummy
+ { // AZALIA_PIN
+ 2, // AzaliaSdin0
+ 2, // AzaliaSdin1
+ 2, // AzaliaSdin2
+ 2, // AzaliaSdin3
+ },
+ NULL, // *AzaliaOemCodecTablePtr
+ NULL, // *AzaliaOemFpCodecTablePtr
+ },
+
+ { // FCH_SPI
+ TRUE, // LpcMsiEnable
+ 0x00000000, // LpcSsid
+ 0, // RomBaseAddress
+ 0, // Speed
+ 0, // FastSpeed
+ 0, // WriteSpeed
+ 0, // Mode
+ 0, // AutoMode
+ 0, // BurstWrite
+ TRUE, // LpcClk0
+ TRUE, // LpcClk1
+ },
+
+ { // FCH_PCIB
+ FALSE, // PcibMsiEnable
+ 0x00000000, // PcibSsid
+ 0x0F, // PciClks
+ 0, // PcibClkStopOverride
+ FALSE, // PcibClockRun
+ },
+
+ { // FCH_F1
+ FALSE, // GecEnable
+ },
+
+ { // FCH_SD
+ SdDisable, // SdConfig
+ 0, // Speed
+ 0, // BitWidth
+ 0x00000000, // SdSsid
+ Sd50MhzTraceCableLengthWithinSixInches, // SdClockControl
+ FALSE,
+ 0,
+ 1,
+ 0
+ },
+
+ {0}, // FCH_HWM
+
+ {0, // FCH_IR
+ 0x23, // IrPinControl
+ },
+
+ { // FCH_HPET
+ TRUE, // HpetEnable
+ TRUE, // HpetMsiDis
+ 0xFED00000 // HpetBase
+ },
+
+ { // FCH_GCPU
+ 0, // AcDcMsg
+ 1, // TimerTickTrack
+ 1, // ClockInterruptTag
+ 0, // OhciTrafficHanding
+ 0, // EhciTrafficHanding
+ 0, // GcpuMsgCMultiCore
+ 0, // GcpuMsgCStage
+ },
+
+ {0}, // FCH_IMC
+
+ { // FCH_MISC
+ FALSE, // NativePcieSupport
+ FALSE, // S3Resume
+ FALSE, // RebootRequired
+ 0, // FchVariant
+ 0, // CG2PLL
+ { // TIMER_SMI-LongTimer
+ FALSE, // Enable
+ FALSE, // StartNow
+ 1000 // CycleDuration
+ },
+ { // TIMER_SMI-ShortTimer
+ FALSE, // Enable
+ FALSE, // StartNow
+ 0x7FFF // CycleDuration
+ }
+ }
+};
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/Family/Yangtze/ResetDefYangtze.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/Family/Yangtze/ResetDefYangtze.c
new file mode 100644
index 0000000..77cb199
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/Family/Yangtze/ResetDefYangtze.c
@@ -0,0 +1,185 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Graphics Controller family specific service procedure
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 85510 $ @e \$Date: 2013-01-08 16:26:41 -0600 (Tue, 08 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "FchPlatform.h"
+#include "Filecode.h"
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------------------
+ * Default FCH interface settings at InitReset phase.
+ *----------------------------------------------------------------------------------------
+ */
+CONST FCH_RESET_INTERFACE ROMDATA FchResetInterfaceDefault = {
+ TRUE, // UmiGen2
+ TRUE, // SataEnable
+ TRUE, // IdeEnable
+ TRUE, // GppEnable
+ TRUE, // Xhci0Enable
+ TRUE // Xhci1Enable
+};
+
+
+/*----------------------------------------------------------------
+ * InitReset Phase Data Block Default (Failsafe)
+ *----------------------------------------------------------------
+ */
+FCH_RESET_DATA_BLOCK InitResetCfgDefault = {
+ NULL, // StdHeader
+ { TRUE,
+ TRUE,
+ FALSE,
+ FALSE,
+ TRUE,
+ TRUE
+ }, // FchReset
+
+ 1, // FastSpeed
+ 3, // WriteSpeed
+ 5, // Mode
+ 0, // AutoMode
+ 0, // BurstWrite
+ FALSE, // SataIdeCombMdPriSecOpt
+ 0, // Cg2Pll
+ FALSE, // EcKbd
+ FALSE, // LegacyFree
+ FALSE, // SataSetMaxGen2
+ 1, // SataClkMode
+ 0, // SataModeReg
+ FALSE, // SataInternal100Spread
+ 2, // SpiSpeed
+// 0xFCFCFCFC, // 38
+// 0x88FC, // 3c
+// 0, // 1d_34
+ 1, // 20_0
+ FALSE, // EcChannel0
+
+ { // FCH_GPP
+ { // Array of FCH_GPP_PORT_CONFIG PortCfg[4]
+ {
+ FALSE, // PortPresent
+ FALSE, // PortDetected
+ FALSE, // PortIsGen2
+ FALSE, // PortHotPlug
+ 0, // PortMisc
+ },
+ {
+ FALSE, // PortPresent
+ FALSE, // PortDetected
+ FALSE, // PortIsGen2
+ FALSE, // PortHotPlug
+ 0, // PortMisc
+ },
+ {
+ FALSE, // PortPresent
+ FALSE, // PortDetected
+ FALSE, // PortIsGen2
+ FALSE, // PortHotPlug
+ 0, // PortMisc
+ },
+ {
+ FALSE, // PortPresent
+ FALSE, // PortDetected
+ FALSE, // PortIsGen2
+ FALSE, // PortHotPlug
+ 0, // PortMisc
+ },
+ },
+ PortA1B1C1D1, // GppLinkConfig
+ FALSE, // GppFunctionEnable
+ FALSE, // GppToggleReset
+ 0, // GppHotPlugGeventNum
+ 0, // GppFoundGfxDev
+ FALSE, // GppGen2
+ 0, // GppGen2Strap
+ FALSE, // GppMemWrImprove
+ FALSE, // GppUnhidePorts
+ 0, // GppPortAspm
+ FALSE, // GppLaneReversal
+ FALSE, // GppPhyPllPowerDown
+ FALSE, // GppDynamicPowerSaving
+ FALSE, // PcieAer
+ FALSE, // PcieRas
+ FALSE, // PcieCompliance
+ FALSE, // PcieSoftwareDownGrade
+ FALSE, // UmiPhyPllPowerDown
+ FALSE, // SerialDebugBusEnable
+ 0, // GppHardwareDownGrade
+ 0, // GppL1ImmediateAck
+ FALSE, // NewGppAlgorithm
+ 0, // HotPlugPortsStatus
+ 0, // FailPortsStatus
+ 40, // GppPortMinPollingTime
+ FALSE, // IsCapsuleMode
+ },
+ { // FCH_SPI
+ FALSE, // LpcMsiEnable
+ 0x00000000, // LpcSsid
+ 0, // RomBaseAddress
+ 0, // Speed
+ 0, // FastSpeed
+ 0, // WriteSpeed
+ 0, // Mode
+ 0, // AutoMode
+ 0, // BurstWrite
+ TRUE, // LpcClk0
+ TRUE, // LpcClk1
+ 0, // SPI100_Enable
+ {0} // SpiDeviceProfile
+ },
+ FALSE, // QeEnabled
+ NULL // OemResetProgrammingTablePtr
+};
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitEnv.c
new file mode 100644
index 0000000..f1ce3ab
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitEnv.c
@@ -0,0 +1,114 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH Initialization.
+ *
+ * Init IOAPIC/IOMMU/Misc NB features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+
+#include "FchPlatform.h"
+#include "FchTaskLauncher.h"
+#include "heapManager.h"
+#include "Ids.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_INTERFACE_FCHINITENV_FILECODE
+
+extern FCH_TASK_ENTRY *FchInitEnvTaskTable[];
+extern FCH_INTERFACE FchInterfaceDefault;
+
+FCH_DATA_BLOCK*
+FchInitEnvCreatePrivateData (
+ IN AMD_ENV_PARAMS *EnvParams
+ );
+AGESA_STATUS
+FchInitEnv (
+ IN AMD_ENV_PARAMS *EnvParams
+ );
+
+AGESA_STATUS
+FchEnvConstructor (
+ IN AMD_ENV_PARAMS *EnvParams
+ );
+/*----------------------------------------------------------------------------------------*/
+/**
+ * FchInitEnv - Config Fch before PCI emulation
+ *
+ *
+ *
+ * @param[in] EnvParams
+ *
+ */
+AGESA_STATUS
+FchInitEnv (
+ IN AMD_ENV_PARAMS *EnvParams
+ )
+{
+ FCH_DATA_BLOCK *FchParams;
+ AGESA_STATUS Status;
+
+ IDS_HDT_CONSOLE (FCH_TRACE, " FchInitEnv Enter... \n");
+ FchParams = FchInitEnvCreatePrivateData (EnvParams);
+
+ // Override internal data with IDS (Optional, internal build only)
+ IDS_OPTION_CALLOUT (IDS_CALLOUT_FCH_INIT_ENV, FchParams, FchParams->StdHeader);
+
+ AgesaFchOemCallout (FchParams);
+ Status = FchTaskLauncher (&FchInitEnvTaskTable[0], FchParams, TpFchInitEnvDispatching);
+ IDS_HDT_CONSOLE (FCH_TRACE, " FchInitEnv Exit... Status = [0x%x]\n", Status);
+ return Status;
+}
+
+
+/**
+ * A constructor for FCH build parameter structure at InitEnv stage
+ *
+ * Sets inputs to valid, basic level, defaults.
+ *
+ * @param[in,out] EnvParams InitEnv configuration data block
+ *
+ * @retval AGESA_SUCCESS Constructors are not allowed to fail
+*/
+AGESA_STATUS
+FchEnvConstructor (
+ IN AMD_ENV_PARAMS *EnvParams
+ )
+{
+ EnvParams->FchInterface = FchInterfaceDefault;
+ return AGESA_SUCCESS;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitLate.c
new file mode 100644
index 0000000..1f1bdc1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitLate.c
@@ -0,0 +1,101 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH Initialization.
+ *
+ * Init IOAPIC/IOMMU/Misc NB features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+
+#include "FchPlatform.h"
+#include "FchTaskLauncher.h"
+#include "heapManager.h"
+#include "Ids.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_INTERFACE_FCHINITLATE_FILECODE
+
+extern FCH_TASK_ENTRY *FchInitLateTaskTable[];
+
+AGESA_STATUS
+FchInitLate (
+ IN AMD_S3SAVE_PARAMS *LateParams
+ );
+
+AGESA_STATUS
+FchLateConstructor (
+ IN AMD_LATE_PARAMS *LateParams
+ );
+/*----------------------------------------------------------------------------------------*/
+/**
+ * FchInitLate - Prepare Fch to boot to OS.
+ *
+ *
+ *
+ * @param[in] LateParams
+ *
+ */
+AGESA_STATUS
+FchInitLate (
+ IN AMD_S3SAVE_PARAMS *LateParams
+ )
+{
+ FCH_DATA_BLOCK *FchParams;
+ AGESA_STATUS Status;
+
+ IDS_HDT_CONSOLE (FCH_TRACE, " FchInitLate Enter... \n");
+ FchParams = FchInitLoadDataBlock (&LateParams->FchInterface, &LateParams->StdHeader);
+ Status = FchTaskLauncher (&FchInitLateTaskTable[0], FchParams, TpFchInitLateDispatching);
+ IDS_HDT_CONSOLE (FCH_TRACE, " FchInitLate Exit... Status = [0x%x]\n", Status);
+ return Status;
+}
+
+
+/**
+ * A constructor for FCH build parameter structure at InitLate stage
+ *
+ * Sets inputs to valid, basic level, defaults.
+ *
+ * @param[in,out] LateParams
+ *
+ * @retval AGESA_SUCCESS Constructors are not allowed to fail
+*/
+AGESA_STATUS
+FchLateConstructor (
+ IN AMD_LATE_PARAMS *LateParams
+ )
+{
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitMid.c
new file mode 100644
index 0000000..50a0849
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitMid.c
@@ -0,0 +1,100 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH Initialization.
+ *
+ * Init IOAPIC/IOMMU/Misc NB features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+
+#include "FchPlatform.h"
+#include "FchTaskLauncher.h"
+#include "heapManager.h"
+#include "Ids.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_INTERFACE_FCHINITMID_FILECODE
+
+extern FCH_TASK_ENTRY *FchInitMidTaskTable[];
+
+AGESA_STATUS
+FchInitMid (
+ IN AMD_MID_PARAMS *MidParams
+ );
+
+AGESA_STATUS
+FchMidConstructor (
+ IN AMD_MID_PARAMS *MidParams
+ );
+/**
+ * FchInitMid - Config Fch after PCI emulation
+ *
+ *
+ *
+ * @param[in] MidParams Fch configuration structure pointer.
+ *
+ */
+AGESA_STATUS
+FchInitMid (
+ IN AMD_MID_PARAMS *MidParams
+ )
+{
+ FCH_DATA_BLOCK *FchParams;
+ AGESA_STATUS Status;
+
+ IDS_HDT_CONSOLE (FCH_TRACE, " FchInitMid Enter... \n");
+ FchParams = FchInitLoadDataBlock (&MidParams->FchInterface, &MidParams->StdHeader);
+ Status = FchTaskLauncher (&FchInitMidTaskTable[0], FchParams, TpFchInitMidDispatching);
+ IDS_HDT_CONSOLE (FCH_TRACE, " FchInitMid Exit... Status = [0x%x]\n", Status);
+ return Status;
+}
+
+
+/**
+ * A constructor for FCH build parameter structure at InitEnv stage
+ *
+ * Sets inputs to valid, basic level, defaults.
+ *
+ * @param[in] MidParams
+ *
+ * @retval AGESA_SUCCESS Constructors are not allowed to fail
+*/
+AGESA_STATUS
+FchMidConstructor (
+ IN AMD_MID_PARAMS *MidParams
+ )
+{
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitReset.c
new file mode 100644
index 0000000..97f60dd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitReset.c
@@ -0,0 +1,115 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH Init during Power-On Reset
+ *
+ * Prepare FCH environment during power on stage
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+
+#include "FchPlatform.h"
+#include "FchTaskLauncher.h"
+#include "heapManager.h"
+#include "Ids.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_INTERFACE_FCHINITRESET_FILECODE
+
+extern FCH_TASK_ENTRY *FchInitResetTaskTable[];
+extern FCH_RESET_INTERFACE FchResetInterfaceDefault;
+
+FCH_RESET_DATA_BLOCK*
+FchInitResetLoadPrivateDefault (
+ IN AMD_RESET_PARAMS *ResetParams
+ );
+
+AGESA_STATUS
+FchInitReset (
+ IN AMD_RESET_PARAMS *ResetParams
+ );
+
+AGESA_STATUS
+FchResetConstructor (
+ IN AMD_RESET_PARAMS *ResetParams
+ );
+/**
+ * FchInitReset - Config Fch during power on stage.
+ *
+ *
+ *
+ * @param[in] ResetParams
+ *
+ */
+AGESA_STATUS
+FchInitReset (
+ IN AMD_RESET_PARAMS *ResetParams
+ )
+{
+ FCH_RESET_DATA_BLOCK *FchParams;
+
+ // Load private data block with default
+ FchParams = FchInitResetLoadPrivateDefault (ResetParams);
+
+ // Override external data with input parameters
+ FchParams->StdHeader = &ResetParams->StdHeader;
+ FchParams->FchReset = ResetParams->FchInterface;
+ FchParams->Gpp.GppFunctionEnable = ResetParams->FchInterface.GppEnable;
+
+ // Override internal data with IDS (Optional, internal build only)
+ IDS_OPTION_CALLOUT (IDS_CALLOUT_FCH_INIT_RESET, FchParams, &ResetParams->StdHeader);
+
+ AgesaFchOemCallout (FchParams);
+ return FchTaskLauncher (&FchInitResetTaskTable[0], FchParams, TpFchInitResetDispatching);
+}
+
+
+/**
+ * A constructor for FCH build parameter structure at InitReset stage
+ *
+ * Sets inputs to valid, basic level, defaults.
+ *
+ * @param[in] ResetParams
+ *
+ * @retval AGESA_SUCCESS Constructors are not allowed to fail
+*/
+AGESA_STATUS
+FchResetConstructor (
+ IN AMD_RESET_PARAMS *ResetParams
+ )
+{
+ ResetParams->FchInterface = FchResetInterfaceDefault;
+ return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitS3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitS3.c
new file mode 100644
index 0000000..e47611d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchInitS3.c
@@ -0,0 +1,102 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH Initialization.
+ *
+ * Init IOAPIC/IOMMU/Misc NB features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+
+#include "FchPlatform.h"
+#include "FchTaskLauncher.h"
+#define FILECODE PROC_FCH_INTERFACE_FCHINITS3_FILECODE
+
+extern FCH_TASK_ENTRY *FchInitS3EarlyTaskTable[];
+extern FCH_TASK_ENTRY *FchInitS3LateTaskTable[];
+
+VOID
+FchInitS3EarlyRestore (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ );
+
+VOID
+FchInitS3LateRestore (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ );
+/*----------------------------------------------------------------------------------------*/
+/**
+ * FchInitS3EarlyRestore - Config Fch before ACPI S3 resume PCI config device restore
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+
+VOID
+FchInitS3EarlyRestore (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ AGESA_STATUS AgesaStatus;
+
+ FchDataPtr->Misc.S3Resume = 1;
+ AgesaStatus = FchTaskLauncher (&FchInitS3EarlyTaskTable[0], FchDataPtr, TpFchInitS3EarlyDispatching);
+ FchDataPtr->Misc.S3Resume = 0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * FchInitS3LateRestore - Config Fch after ACPI S3 resume PCI config device restore
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+
+VOID
+FchInitS3LateRestore (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ AGESA_STATUS AgesaStatus;
+
+ FchDataPtr->Misc.S3Resume = 1;
+ AgesaStatus = FchTaskLauncher (&FchInitS3LateTaskTable[0], FchDataPtr, TpFchInitS3LateDispatching);
+ FchDataPtr->Misc.S3Resume = 0;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchTaskLauncher.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchTaskLauncher.c
new file mode 100644
index 0000000..cbf2dc79
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchTaskLauncher.c
@@ -0,0 +1,69 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH task launcher
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Ids.h"
+#define FILECODE PROC_FCH_INTERFACE_FCHTASKLAUNCHER_FILECODE
+
+AGESA_STATUS
+FchTaskLauncher (
+ IN FCH_TASK_ENTRY **TaskPtr,
+ IN VOID *FchCfg,
+ IN AGESA_TP TestPoint
+ );
+
+AGESA_STATUS
+FchTaskLauncher (
+ IN FCH_TASK_ENTRY **TaskPtr,
+ IN VOID *FchCfg,
+ IN AGESA_TP TestPoint
+ )
+{
+ AGESA_TESTPOINT (TestPoint, *(AMD_CONFIG_PARAMS **) FchCfg);
+ while (*TaskPtr != NULL) {
+ (*TaskPtr) (FchCfg);
+ TaskPtr++;
+ }
+ return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchTaskLauncher.h b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchTaskLauncher.h
new file mode 100644
index 0000000..776e603
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/FchTaskLauncher.h
@@ -0,0 +1,62 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * FCH task launcher
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#ifndef _FCH_TASK_LAUNCHER_H_
+#define _FCH_TASK_LAUNCHER_H_
+
+#include "Ids.h"
+
+FCH_DATA_BLOCK*
+FchInitLoadDataBlock (
+ IN FCH_INTERFACE *FchInterface,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+FchTaskLauncher (
+ IN FCH_TASK_ENTRY **TaskPtr,
+ IN VOID *FchCfg,
+ IN AGESA_TP TestPoint
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/InitEnvDef.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/InitEnvDef.c
new file mode 100644
index 0000000..4bea9fb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/InitEnvDef.c
@@ -0,0 +1,196 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Fch Init during POWER-ON
+ *
+ * Prepare Fch environment during power on stage.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+
+#include "FchPlatform.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_INTERFACE_INITENVDEF_FILECODE
+
+extern FCH_DATA_BLOCK InitEnvCfgDefault;
+
+FCH_DATA_BLOCK*
+FchInitEnvCreatePrivateData (
+ IN AMD_ENV_PARAMS *EnvParams
+ );
+
+FCH_DATA_BLOCK*
+FchInitLoadDataBlock (
+ IN FCH_INTERFACE *FchInterface,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+FCH_DATA_BLOCK*
+FchInitLoadDataBlock (
+ IN FCH_INTERFACE *FchInterface,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ FCH_DATA_BLOCK *FchParams;
+ LOCATE_HEAP_PTR LocHeapPtr;
+ AMD_CONFIG_PARAMS TempStdHeader;
+ AGESA_STATUS AgesaStatus;
+
+ TempStdHeader = *StdHeader;
+ TempStdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+
+ // Locate the internal data block via heap manager
+ LocHeapPtr.BufferHandle = AMD_FCH_DATA_BLOCK_HANDLE;
+ AgesaStatus = HeapLocateBuffer (&LocHeapPtr, &TempStdHeader);
+ ASSERT (!AgesaStatus);
+
+ FchParams = (FCH_DATA_BLOCK *) LocHeapPtr.BufferPtr;
+ ASSERT (FchParams != NULL);
+ FchParams->StdHeader = StdHeader;
+ return FchParams;
+}
+
+
+STATIC VOID
+RetrieveDataBlockFromInitReset (
+ IN FCH_DATA_BLOCK *FchParams
+ )
+{
+ LOCATE_HEAP_PTR LocHeapPtr;
+ FCH_RESET_DATA_BLOCK *ResetDb;
+ AGESA_STATUS AgesaStatus;
+
+ LocHeapPtr.BufferHandle = AMD_FCH_RESET_DATA_BLOCK_HANDLE;
+ AgesaStatus = HeapLocateBuffer (&LocHeapPtr, FchParams->StdHeader);
+ if (AgesaStatus == AGESA_SUCCESS) {
+ ASSERT (LocHeapPtr.BufferPtr != NULL);
+ ResetDb = (FCH_RESET_DATA_BLOCK *) (LocHeapPtr.BufferPtr - sizeof (ResetDb) + sizeof (UINT32));
+ // Override FchParams with contents in ResetDb
+
+ FchParams->Usb.Xhci0Enable = ResetDb->FchReset.Xhci0Enable;
+ FchParams->Usb.Xhci1Enable = ResetDb->FchReset.Xhci1Enable;
+ FchParams->Spi.SpiFastSpeed = ResetDb->FastSpeed;
+ FchParams->Spi.WriteSpeed = ResetDb->WriteSpeed;
+ FchParams->Spi.SpiMode = ResetDb->Mode;
+ FchParams->Spi.AutoMode = ResetDb->AutoMode;
+ FchParams->Spi.SpiBurstWrite = ResetDb->BurstWrite;
+ FchParams->Sata.SataMode.Sata6AhciCap = (UINT8) ResetDb->Sata6AhciCap;
+ FchParams->Misc.Cg2Pll = ResetDb->Cg2Pll;
+ FchParams->Sata.SataMode.SataSetMaxGen2 = ResetDb->SataSetMaxGen2;
+ FchParams->Sata.SataMode.SataClkMode = ResetDb->SataClkMode;
+ FchParams->Sata.SataMode.SataModeReg = ResetDb->SataModeReg;
+ FchParams->Sata.SataInternal100Spread = (UINT8) ResetDb->SataInternal100Spread;
+ FchParams->Spi.SpiSpeed = ResetDb->SpiSpeed;
+ FchParams->Gpp = ResetDb->Gpp;
+ }
+}
+
+
+FCH_DATA_BLOCK*
+FchInitEnvCreatePrivateData (
+ IN AMD_ENV_PARAMS *EnvParams
+ )
+{
+ FCH_DATA_BLOCK *FchParams;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ AGESA_STATUS AgesaStatus;
+
+ // First allocate internal data block via heap manager
+ AllocHeapParams.RequestedBufferSize = sizeof (FCH_DATA_BLOCK);
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ AllocHeapParams.BufferHandle = AMD_FCH_DATA_BLOCK_HANDLE;
+ AgesaStatus = HeapAllocateBuffer (&AllocHeapParams, &EnvParams->StdHeader);
+ ASSERT (!AgesaStatus);
+
+ FchParams = (FCH_DATA_BLOCK *) AllocHeapParams.BufferPtr;
+ ASSERT (FchParams != NULL);
+ IDS_HDT_CONSOLE (FCH_TRACE, " FCH Data Block Allocation: [0x%x], Ptr = 0x%08x\n", AgesaStatus, FchParams);
+
+ // Load private data block with default
+ *FchParams = InitEnvCfgDefault;
+ FchParams->StdHeader = &EnvParams->StdHeader;
+
+ RetrieveDataBlockFromInitReset (FchParams);
+
+ // Update with external parameters
+ FchParams->Sd.SdConfig = EnvParams->FchInterface.SdConfig;
+ FchParams->Azalia.AzaliaEnable = EnvParams->FchInterface.AzaliaController;
+ FchParams->Ir.IrConfig = EnvParams->FchInterface.IrConfig;
+ FchParams->Ab.NbSbGen2 = EnvParams->FchInterface.UmiGen2;
+ FchParams->Sata.SataClass = EnvParams->FchInterface.SataClass;
+ FchParams->Sata.SataMode.SataEnable = EnvParams->FchInterface.SataEnable;
+ FchParams->Sata.SataMode.IdeEnable = EnvParams->FchInterface.IdeEnable;
+ FchParams->Sata.SataIdeMode = EnvParams->FchInterface.SataIdeMode;
+ FchParams->Usb.Ohci1Enable = EnvParams->FchInterface.Ohci1Enable;
+ FchParams->Usb.Ehci1Enable = EnvParams->FchInterface.Ohci1Enable;
+ FchParams->Usb.Ohci2Enable = EnvParams->FchInterface.Ohci2Enable;
+ FchParams->Usb.Ehci2Enable = EnvParams->FchInterface.Ohci2Enable;
+ FchParams->Usb.Ohci3Enable = EnvParams->FchInterface.Ohci3Enable;
+ FchParams->Usb.Ehci3Enable = EnvParams->FchInterface.Ohci3Enable;
+ FchParams->Usb.Ohci4Enable = EnvParams->FchInterface.Ohci4Enable;
+ FchParams->HwAcpi.PwrFailShadow = EnvParams->FchInterface.FchPowerFail;
+ FchParams->HwAcpi.Smbus0BaseAddress = UserOptions.FchBldCfg->CfgSmbus0BaseAddress;
+ FchParams->HwAcpi.Smbus1BaseAddress = UserOptions.FchBldCfg->CfgSmbus1BaseAddress;
+ FchParams->HwAcpi.SioPmeBaseAddress = UserOptions.FchBldCfg->CfgSioPmeBaseAddress;
+ FchParams->HwAcpi.AcpiPm1EvtBlkAddr = UserOptions.FchBldCfg->CfgAcpiPm1EvtBlkAddr;
+ FchParams->HwAcpi.AcpiPm1CntBlkAddr = UserOptions.FchBldCfg->CfgAcpiPm1CntBlkAddr;
+ FchParams->HwAcpi.AcpiPmTmrBlkAddr = UserOptions.FchBldCfg->CfgAcpiPmTmrBlkAddr;
+ FchParams->HwAcpi.CpuControlBlkAddr = UserOptions.FchBldCfg->CfgCpuControlBlkAddr;
+ FchParams->HwAcpi.AcpiGpe0BlkAddr = UserOptions.FchBldCfg->CfgAcpiGpe0BlkAddr;
+ FchParams->HwAcpi.SmiCmdPortAddr = UserOptions.FchBldCfg->CfgSmiCmdPortAddr;
+ FchParams->HwAcpi.AcpiPmaCntBlkAddr = UserOptions.FchBldCfg->CfgAcpiPmaCntBlkAddr;
+ FchParams->HwAcpi.WatchDogTimerBase = UserOptions.FchBldCfg->CfgWatchDogTimerBase;
+ FchParams->Sata.SataRaid5Ssid = UserOptions.FchBldCfg->CfgSataRaid5Ssid;
+ FchParams->Sata.SataRaidSsid = UserOptions.FchBldCfg->CfgSataRaidSsid;
+ FchParams->Sata.SataAhciSsid = UserOptions.FchBldCfg->CfgSataAhciSsid;
+ FchParams->Sata.SataIdeSsid = UserOptions.FchBldCfg->CfgSataIdeSsid;
+ FchParams->Spi.RomBaseAddress = UserOptions.FchBldCfg->CfgSpiRomBaseAddress;
+ FchParams->Sd.SdSsid = UserOptions.FchBldCfg->CfgSdSsid;
+ FchParams->Spi.LpcSsid = UserOptions.FchBldCfg->CfgLpcSsid;
+ FchParams->Hpet.HpetBase = UserOptions.FchBldCfg->CfgHpetBaseAddress;
+ FchParams->Azalia.AzaliaSsid = UserOptions.FchBldCfg->CfgAzaliaSsid;
+ FchParams->Smbus.SmbusSsid = UserOptions.FchBldCfg->CfgSmbusSsid;
+ FchParams->Ide.IdeSsid = UserOptions.FchBldCfg->CfgIdeSsid;
+ FchParams->Usb.EhciSsid = UserOptions.FchBldCfg->CfgEhciSsid;
+ FchParams->Usb.OhciSsid = UserOptions.FchBldCfg->CfgOhciSsid;
+ FchParams->Usb.XhciSsid = UserOptions.FchBldCfg->CfgXhciSsid;
+ FchParams->Ir.IrPinControl = UserOptions.FchBldCfg->CfgFchIrPinControl;
+ FchParams->Sd.SdClockControl = UserOptions.FchBldCfg->CfgFchSdClockControl;
+ return FchParams;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/InitResetDef.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/InitResetDef.c
new file mode 100644
index 0000000..9cbffd7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Interface/InitResetDef.c
@@ -0,0 +1,90 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Fch Init during POWER-ON
+ *
+ * Prepare Fch environment during power on stage.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+
+#include "FchPlatform.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_INTERFACE_INITRESETDEF_FILECODE
+
+extern FCH_RESET_DATA_BLOCK InitResetCfgDefault;
+
+FCH_RESET_DATA_BLOCK*
+FchInitResetLoadPrivateDefault (
+ IN AMD_RESET_PARAMS *ResetParams
+ );
+
+FCH_RESET_DATA_BLOCK*
+FchInitResetLoadPrivateDefault (
+ IN AMD_RESET_PARAMS *ResetParams
+ )
+{
+ FCH_RESET_DATA_BLOCK *FchParams;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ AGESA_STATUS AgesaStatus;
+
+ // First allocate internal data block via heap manager
+ AllocHeapParams.RequestedBufferSize = sizeof (FCH_RESET_DATA_BLOCK);
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ AllocHeapParams.BufferHandle = AMD_FCH_RESET_DATA_BLOCK_HANDLE;
+ AgesaStatus = HeapAllocateBuffer (&AllocHeapParams, &ResetParams->StdHeader);
+ ASSERT (!AgesaStatus);
+
+ FchParams = (FCH_RESET_DATA_BLOCK *) AllocHeapParams.BufferPtr;
+ ASSERT (FchParams != NULL);
+ IDS_HDT_CONSOLE (FCH_TRACE, " FCH Reset Data Block Allocation: [0x%x], Ptr = 0x%08x\n", AgesaStatus, FchParams);
+
+ *FchParams = InitResetCfgDefault;
+
+ FchParams->Gpp.GppLinkConfig = UserOptions.FchBldCfg->CfgFchGppLinkConfig;
+ FchParams->Gpp.PortCfg[0].PortPresent = UserOptions.FchBldCfg->CfgFchGppPort0Present;
+ FchParams->Gpp.PortCfg[1].PortPresent = UserOptions.FchBldCfg->CfgFchGppPort1Present;
+ FchParams->Gpp.PortCfg[2].PortPresent = UserOptions.FchBldCfg->CfgFchGppPort2Present;
+ FchParams->Gpp.PortCfg[3].PortPresent = UserOptions.FchBldCfg->CfgFchGppPort3Present;
+ FchParams->Gpp.PortCfg[0].PortHotPlug = UserOptions.FchBldCfg->CfgFchGppPort0HotPlug;
+ FchParams->Gpp.PortCfg[1].PortHotPlug = UserOptions.FchBldCfg->CfgFchGppPort1HotPlug;
+ FchParams->Gpp.PortCfg[2].PortHotPlug = UserOptions.FchBldCfg->CfgFchGppPort2HotPlug;
+ FchParams->Gpp.PortCfg[3].PortHotPlug = UserOptions.FchBldCfg->CfgFchGppPort3HotPlug;
+
+ return FchParams;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/AbEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/AbEnv.c
new file mode 100644
index 0000000..f8afabc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/AbEnv.c
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Ab Bridge
+ *
+ * Init Ab Bridge features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_PCIE_ABENV_FILECODE
+
+/**
+ * FchInitEnvAb - Config Ab Bridge before PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvAb (
+ IN VOID *FchDataPtr
+ )
+{
+ FchInitEnvAbLinkInit (FchDataPtr);
+}
+
+/**
+ * FchInitEnvAbSpecial - Config Ab Bridge special timing
+ *
+ * This routine must separate with FchInitEnvAb and give Ab
+ * bridge little time to get ready
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvAbSpecial (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/AbLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/AbLate.c
new file mode 100644
index 0000000..7cbd3a3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/AbLate.c
@@ -0,0 +1,67 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Ab Bridge
+ *
+ * Init Ab Bridge features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_PCIE_ABLATE_FILECODE
+
+/**
+ * FchInitLateAb - Prepare Ab Bridge to boot to OS.
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateAb (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ FchAbLateProgram (FchDataPtr);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/AbMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/AbMid.c
new file mode 100644
index 0000000..ee53b58
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/AbMid.c
@@ -0,0 +1,62 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Ab Bridge
+ *
+ * Init Ab Bridge features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_PCIE_ABMID_FILECODE
+
+/**
+ * FchInitMidAb - Config Ab Bridge after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidAb (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/AbReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/AbReset.c
new file mode 100644
index 0000000..0b96daf0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/AbReset.c
@@ -0,0 +1,64 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Ab Bridge
+ *
+ * Init Ab Bridge features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#include "FchDef.h"
+#define FILECODE PROC_FCH_PCIE_ABRESET_FILECODE
+
+/**
+ * FchInitResetAb - Config Ab Bridge during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetAb (
+ IN VOID *FchDataPtr
+ )
+{
+ FchProgramAbPowerOnReset (FchDataPtr);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/Family/Yangtze/YangtzeAbEnvService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/Family/Yangtze/YangtzeAbEnvService.c
new file mode 100644
index 0000000..c274849
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/Family/Yangtze/YangtzeAbEnvService.c
@@ -0,0 +1,253 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config YANGTZE AB
+ *
+ * Init AB bridge.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87890 $ @e \$Date: 2013-02-12 13:09:22 -0600 (Tue, 12 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_PCIE_FAMILY_YANGTZE_YANGTZEABENVSERVICE_FILECODE
+
+//
+// Declaration of local functions
+//
+VOID AbCfgTbl (IN AB_TBL_ENTRY *ABTbl, IN AMD_CONFIG_PARAMS *StdHeader);
+
+/**
+ * YangtzeInitEnvAbTable - AB-Link Configuration Table for Yangtze
+ *
+ */
+AB_TBL_ENTRY YangtzeInitEnvAbTable[] =
+{
+ //
+ // Controls the USB OHCI controller prefetch used for enhancing performance of ISO out devices.
+ // Setting B-Link Prefetch Mode (ABCFG 0x80 [18:17] = 11)
+ //
+ {ABCFG, FCH_ABCFG_REG80, BIT0 + BIT17 + BIT18, BIT0 + BIT17 + BIT18},
+
+ //
+ // Enabled SMI ordering enhancement. ABCFG 0x90[21]
+ // USB Delay A-Link Express L1 State. ABCFG 0x90[17]
+ //
+ {ABCFG, FCH_ABCFG_REG90, BIT21, BIT21},
+
+ //
+ // Enabling Detection of Upstream Interrupts ABCFG 0x94 [20] = 1
+ // ABCFG 0x94 [19:0] = cpu interrupt delivery address [39:20]
+ //
+ {ABCFG, FCH_ABCFG_REG94, BIT20, BIT20 + 0x00FEE},
+
+ //
+ // Programming cycle delay for AB and BIF clock gating
+ // Enable the AB and BIF clock-gating logic.
+ // Enable the A-Link int_arbiter enhancement to allow the A-Link bandwidth to be used more efficiently
+ //
+ {ABCFG, FCH_ABCFG_REG10054, 0x00FFFFFF, 0x000007FF},
+ {ABCFG, 0x98, 0x0003FF00, 0x00034700},
+
+ //
+ // Host Outstanding Completion Clock Gating
+ //
+ {ABCFG, 0x208, 0xFFFFFFEF, 0x00081000},
+
+ //
+ // SD ALink prefetch
+ //
+ {ABCFG, 0x10060ul, 0xFBFFFFFF, 0},
+
+ {ABCFG, FCH_ABCFG_REG10090, BIT16, BIT16},
+ {ABCFG, 0, 0, (UINT8) 0xFF}, /// This dummy entry is to clear ab index
+ { (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF},
+};
+
+/**
+ * FchInitEnvAbLinkInit - Set ABCFG registers before PCI
+ * emulation.
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvAbLinkInit (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT16 AbTempVar;
+ UINT8 AbValue8;
+ AB_TBL_ENTRY *AbTblPtr;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ //
+ // AB CFG programming
+ //
+ if ( LocalCfgPtr->Ab.SlowSpeedAbLinkClock ) {
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40, AccessWidth8, (UINT32)~BIT1, BIT1);
+ } else {
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40, AccessWidth8, (UINT32)~BIT1, 0);
+ }
+
+ //
+ // Read Arbiter address, Arbiter address is in PMIO 6Ch
+ //
+ ReadMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG6C, AccessWidth16, &AbTempVar);
+ /// Write 0 to enable the arbiter
+ AbValue8 = 0;
+ LibAmdIoWrite (AccessWidth8, AbTempVar, &AbValue8, StdHeader);
+
+ AbTblPtr = (AB_TBL_ENTRY *) (&YangtzeInitEnvAbTable[0]);
+ AbCfgTbl (AbTblPtr, StdHeader);
+
+ if ( LocalCfgPtr->Ab.ResetCpuOnSyncFlood ) {
+ RwAlink (0x10050ul | (UINT32) (ABCFG << 29), (UINT32)~BIT2, BIT2, StdHeader);
+ }
+
+ if ( LocalCfgPtr->Ab.AbClockGating ) {
+ RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 4), (UINT32) (0x1 << 4), StdHeader);
+ RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 24), (UINT32) (0x1 << 24), StdHeader);
+ RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 20), (UINT32) (0x1 << 20), StdHeader);
+ RwAlink (FCH_ABCFG_REG10054 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x3 << 24), (UINT32) (0x3 << 24), StdHeader);
+ RwAlink (FCH_ABCFG_REG10054 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 20), (UINT32) (0x1 << 20), StdHeader);
+ } else {
+ RwAlink (FCH_ABCFG_REG10054 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 20), 0, StdHeader);
+ RwAlink (FCH_ABCFG_REG10054 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x3 << 24), 0, StdHeader);
+ RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 20), 0, StdHeader);
+ RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 24), 0, StdHeader);
+ RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 4), 0, StdHeader);
+ }
+
+ if ( LocalCfgPtr->Ab.AbDmaMemoryWrtie3264B ) {
+ RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 0), (UINT32) (0x0 << 0), StdHeader);
+ RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 2), (UINT32) (0x1 << 2), StdHeader);
+ } else {
+ RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 0), (UINT32) (0x1 << 0), StdHeader);
+ RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 2), (UINT32) 0x0, StdHeader);
+ }
+
+ if ( LocalCfgPtr->Ab.AbMemoryPowerSaving ) {
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + 0x68, AccessWidth8, 0xFB, 0x00);
+ RwAlink (FCH_ABCFG_REG58 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 29), (UINT32) (0x1 << 29), StdHeader);
+ RwAlink (FCH_ABCFG_REG58 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 31), (UINT32) (0x1 << 31), StdHeader);
+ } else {
+ RwAlink (FCH_ABCFG_REG58 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x5 << 29), (UINT32) 0x0, StdHeader);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + 0x68, AccessWidth8, 0xFB, 0x04);
+ }
+
+ //
+ // A/B Clock Gate-OFF
+ //
+ if ( LocalCfgPtr->Ab.ALinkClkGateOff ) {
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG2C + 2, AccessWidth8, 0xFE, BIT0);
+ } else {
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG2C + 2, AccessWidth8, 0xFE, 0);
+ }
+ if ( LocalCfgPtr->Ab.BLinkClkGateOff ) {
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG2C + 2, AccessWidth8, 0xFD, BIT1);
+ } else {
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG2C + 2, AccessWidth8, 0xFD, 0);
+ }
+ if ( LocalCfgPtr->Ab.ALinkClkGateOff | LocalCfgPtr->Ab.BLinkClkGateOff ) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG04 + 2, AccessWidth8, 0xFE, BIT0);
+ } else {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG04 + 2, AccessWidth8, 0xFE, 0);
+ }
+
+}
+
+/**
+ * AbCfgTbl - Program ABCFG by input table.
+ *
+ *
+ * @param[in] ABTbl ABCFG config table.
+ * @param[in] StdHeader
+ *
+ */
+VOID
+AbCfgTbl (
+ IN AB_TBL_ENTRY *ABTbl,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 AbValue;
+
+ while ( (ABTbl->RegType) != 0xFF ) {
+ if ( ABTbl->RegType == 0 ) {
+ AbValue = 0x30 | (ABTbl->RegType << 29);
+ WriteAlink (AbValue, (ABTbl->RegIndex & 0x00FFFFFF), StdHeader);
+ AbValue = 0x34 | (ABTbl->RegType << 29);
+ WriteAlink (AbValue, ((ReadAlink (AbValue, StdHeader)) & (0xFFFFFFFF^ (ABTbl->RegMask))) | ABTbl->RegData, StdHeader);
+ } else if ( ABTbl->RegType == 2 ) {
+ AbValue = 0x38 | (ABTbl->RegType << 29);
+ WriteAlink (AbValue, (ABTbl->RegIndex & 0x00FFFFFF), StdHeader);
+ AbValue = 0x3C | (ABTbl->RegType << 29);
+ WriteAlink (AbValue, ((ReadAlink (AbValue, StdHeader)) & (0xFFFFFFFF^ (ABTbl->RegMask))) | ABTbl->RegData, StdHeader);
+ } else {
+ AbValue = ABTbl->RegIndex | (ABTbl->RegType << 29);
+ WriteAlink (AbValue, ((ReadAlink (AbValue, StdHeader)) & (0xFFFFFFFF^ (ABTbl->RegMask))) | ABTbl->RegData, StdHeader);
+ }
+
+ ++ABTbl;
+ }
+
+ //
+ //Clear ALink Access Index
+ //
+ AbValue = 0;
+ LibAmdIoWrite (AccessWidth32, ALINK_ACCESS_INDEX, &AbValue, StdHeader);
+}
+
+/**
+ * Is UMI One Lane GEN1 Mode?
+ *
+ *
+ * @retval TRUE or FALSE
+ *
+ */
+BOOLEAN
+IsUmiOneLaneGen1Mode (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return (TRUE);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/Family/Yangtze/YangtzeAbResetService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/Family/Yangtze/YangtzeAbResetService.c
new file mode 100644
index 0000000..506521d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/Family/Yangtze/YangtzeAbResetService.c
@@ -0,0 +1,71 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze AB
+ *
+ * Init AB bridge.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_PCIE_FAMILY_YANGTZE_YANGTZEABRESETSERVICE_FILECODE
+
+
+/**
+ * FchProgramAbPowerOnReset - Config Ab Bridge during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchProgramAbPowerOnReset (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_RESET_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGE0, AccessWidth32, 00, ALINK_ACCESS_INDEX);
+
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/Family/Yangtze/YangtzeAbService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/Family/Yangtze/YangtzeAbService.c
new file mode 100644
index 0000000..bc29f4f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/Family/Yangtze/YangtzeAbService.c
@@ -0,0 +1,68 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze AB
+ *
+ * Init AB bridge.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_PCIE_FAMILY_YANGTZE_YANGTZEABSERVICE_FILECODE
+
+VOID
+FchGppDynamicPowerSaving (
+ IN FCH_GPP *FchGpp,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+}
+
+/**
+ * FchAbLateProgram - Set ABCFG registers during late POST
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchAbLateProgram (
+ IN VOID *FchDataPtr
+ )
+{
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/PcieEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/PcieEnv.c
new file mode 100644
index 0000000..b77d2ee
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/PcieEnv.c
@@ -0,0 +1,67 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Pcie controller
+ *
+ * Init Pcie Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#include "FchDef.h"
+#define FILECODE PROC_FCH_PCIE_PCIEENV_FILECODE
+
+/**
+ * FchInitEnvPcie - Config Pcie before PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvPcie (
+ IN VOID *FchDataPtr
+ )
+{
+ //
+ // PCIE Native setting
+ //
+ ProgramPcieNativeMode (FchDataPtr);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/PcieLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/PcieLate.c
new file mode 100644
index 0000000..a3639c7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/PcieLate.c
@@ -0,0 +1,61 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Pcie controller
+ *
+ * Init Pcie Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_PCIE_PCIELATE_FILECODE
+
+/**
+ * FchInitLatePcie - Prepare Pcie to boot to OS.
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLatePcie (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/PcieMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/PcieMid.c
new file mode 100644
index 0000000..12b8298
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/PcieMid.c
@@ -0,0 +1,61 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Pcie controller
+ *
+ * Init Pcie Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_PCIE_PCIEMID_FILECODE
+
+/**
+ * FchInitMidPcie - Config Pcie after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidPcie (
+ IN VOID *FchDataPtr
+ )
+{
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/PcieReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/PcieReset.c
new file mode 100644
index 0000000..e874420
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Pcie/PcieReset.c
@@ -0,0 +1,63 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Pcie Component
+ *
+ * Init Pcie features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_PCIE_PCIERESET_FILECODE
+
+/**
+ * FchInitResetPcie - Config Pcie controller during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetPcie (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/AhciEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/AhciEnv.c
new file mode 100644
index 0000000..0109f58
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/AhciEnv.c
@@ -0,0 +1,86 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA controller (AHCI mode)
+ *
+ * Init SATA AHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_AHCIENV_FILECODE
+
+/**
+ * FchInitEnvSataAhci - Config SATA Ahci controller before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvSataAhci (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ //
+ // Class code
+ //
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x08), AccessWidth32, 0, 0x01060140, StdHeader);
+ //
+ // Device ID
+ //
+ if ( LocalCfgPtr->Sata.SataClass == SataAhci7804 ) {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x02), AccessWidth16, 0, FCH_SATA_AMDAHCI_DID, StdHeader);
+ } else {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x02), AccessWidth16, 0, FCH_SATA_AHCI_DID, StdHeader);
+ }
+ //
+ // SSID
+ //
+ if (LocalCfgPtr->Sata.SataAhciSsid != 0 ) {
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x2C, AccessWidth32, 0x00, LocalCfgPtr->Sata.SataAhciSsid, StdHeader);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/AhciLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/AhciLate.c
new file mode 100644
index 0000000..73dc4f7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/AhciLate.c
@@ -0,0 +1,67 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA controller (AHCI mode)
+ *
+ * Init SATA AHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_AHCILATE_FILECODE
+
+/**
+ * FchInitLateSataAhci - Prepare SATA AHCI controller to boot to
+ * OS.
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateSataAhci (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 Bar5;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ SataBar5setting (LocalCfgPtr, &Bar5);
+ ShutdownUnconnectedSataPortClock (LocalCfgPtr, Bar5);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/AhciLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/AhciLib.c
new file mode 100644
index 0000000..60f0899
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/AhciLib.c
@@ -0,0 +1,68 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Fch SATA AHCI controller Library
+ *
+ * SATA AHCI Library
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_AHCILIB_FILECODE
+
+/**
+ * sataAhciSetDeviceNumMsi - Program AHCI controller support
+ * device number cap & MSI cap
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+SataAhciSetDeviceNumMsi (
+ IN VOID *FchDataPtr
+ )
+{
+
+ FCH_INTERFACE *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_INTERFACE *)FchDataPtr;
+
+ SataSetDeviceNumMsi (LocalCfgPtr);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/AhciMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/AhciMid.c
new file mode 100644
index 0000000..dcffca5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/AhciMid.c
@@ -0,0 +1,67 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA controller (AHCI mode)
+ *
+ * Init SATA AHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_AHCIMID_FILECODE
+
+/**
+ * FchInitMidSataAhci - Config SATA Ahci controller after PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidSataAhci (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ SataAhciSetDeviceNumMsi (LocalCfgPtr);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Family/Yangtze/YangtzeSataEnvService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Family/Yangtze/YangtzeSataEnvService.c
new file mode 100644
index 0000000..8abcac0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Family/Yangtze/YangtzeSataEnvService.c
@@ -0,0 +1,224 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * SATA Controller family specific service procedure
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 86583 $ @e \$Date: 2013-01-23 12:31:06 -0600 (Wed, 23 Jan 2013) $
+ *
+ */
+
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*/
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_FAMILY_YANGTZE_YANGTZESATAENVSERVICE_FILECODE
+
+
+SATA_PHY_SETTING SataPhyTable[] =
+{
+ {0x0030, 0x0040F407},
+ {0x0120, 0x00403204},
+ {0x0110, 0x00403103},
+
+ {0x0031, 0x0040F407},
+ {0x0121, 0x00403204},
+ {0x0111, 0x00403103},
+
+};
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+//
+// Local Routine
+//
+VOID FchSataCombineControlDataByte (IN UINT8 *ControlReg);
+VOID FchSataCombineControlDataWord (IN UINT16 *ControlReg);
+
+
+/**
+ * FchInitEnvProgramSataPciRegs - Sata Pci Configuration Space
+ * register setting
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvProgramSataPciRegs (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 *PortRegByte;
+ UINT16 *PortRegWord;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+ //
+ //Caculate SataPortReg for SATA_ESP_PORT
+ //
+ PortRegByte = &(LocalCfgPtr->Sata.SataEspPort.SataPortReg);
+ FchSataCombineControlDataByte (PortRegByte);
+ PortRegByte = &(LocalCfgPtr->Sata.SataPortPower.SataPortReg);
+ FchSataCombineControlDataByte (PortRegByte);
+ PortRegWord = &(LocalCfgPtr->Sata.SataPortMd.SataPortMode);
+ FchSataCombineControlDataWord (PortRegWord);
+ PortRegByte = &(LocalCfgPtr->Sata.SataHotRemovalEnhPort.SataPortReg);
+ FchSataCombineControlDataByte (PortRegByte);
+
+ //
+ // Set Sata PCI Configuration Space Write enable
+ //
+ SataEnableWriteAccess (StdHeader);
+
+ // *
+ // Enables the SATA watchdog timer register prior to the SATA BIOS post
+ //
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x44), AccessWidth8, 0xff, BIT0, StdHeader);
+
+ // *
+ // SATA PCI Watchdog timer setting
+ // Set timer out to 0x20 to fix IDE to SATA Bridge dropping drive issue.
+ //
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x44 + 2), AccessWidth8, 0, 0x20, StdHeader);
+
+ //
+ // BIT4: Enable fast boot (SpeedupXPBoot)
+ //
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040), AccessWidth8, 0xef, 0, StdHeader);
+
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x48 + 3), AccessWidth8, 0xff, BIT7, StdHeader);
+
+ //
+ // Unused SATA Ports Disabled
+ //
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040 + 2), AccessWidth8, 0, LocalCfgPtr->Sata.SataPortPower.SataPortReg, StdHeader);
+
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x084), AccessWidth32, (UINT32) (~ (0x01 << 31)), (UINT32) (0x00 << 31), StdHeader);
+}
+
+/**
+ * FchSataCombineControlDataByte - Combine port control options
+ * to one control byte.
+ *
+ *
+ * @param[in] *ControlReg - Data pointer for control byte.
+ *
+ */
+VOID
+FchSataCombineControlDataByte (
+ IN UINT8 *ControlReg
+ )
+{
+ UINT8 Index;
+ UINT8 PortControl;
+
+ *ControlReg = 0;
+ for ( Index = 0; Index < 8; Index++ ) {
+ PortControl = *( ControlReg + 1 + Index );
+ *ControlReg |= PortControl << Index;
+ }
+}
+/**
+ * FchSataCombineControlDataWord - Combine port control options
+ * to one control Word.
+ *
+ *
+ * @param[in] *ControlReg - Data pointer for control byte.
+ *
+ */
+VOID
+FchSataCombineControlDataWord (
+ IN UINT16 *ControlReg
+ )
+{
+ UINT8 Index;
+ UINT8 PortControl;
+
+ *ControlReg = 0;
+ for ( Index = 0; Index < 8; Index++ ) {
+ PortControl = *( (UINT8 *)ControlReg + 2 + Index );
+ *ControlReg |= PortControl << (Index * 2);
+ }
+}
+
+/**
+ * FchProgramSataPhy - Program Sata PHY registers
+ *
+ * @param[in] StdHeader
+ *
+ */
+VOID
+FchProgramSataPhy (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ SATA_PHY_SETTING *PhyTablePtr;
+ UINT16 Index;
+ UINT32 SquelchValue[2];
+ UINT8 PortNum;
+
+ PhyTablePtr = &SataPhyTable[0];
+
+ for (Index = 0; Index < (sizeof (SataPhyTable) / sizeof (SATA_PHY_SETTING)); Index++) {
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x080, AccessWidth16, 0xFC00, PhyTablePtr->PhyCoreControlWord, StdHeader);
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x98, AccessWidth32, 0x00, PhyTablePtr->PhyFineTuneDword, StdHeader);
+ ++PhyTablePtr;
+ }
+ SquelchValue[0] = (0x07 << 9);
+ SquelchValue[1] = (0x07 << 9);
+ for (PortNum = 0; PortNum < 2; PortNum ++) {
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x080, AccessWidth16, 0x00, ( 0x130 + PortNum), StdHeader);
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x09C, AccessWidth32, (UINT32) (~(0x7 << 9)), SquelchValue[PortNum], StdHeader);
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x09C, AccessWidth32, (UINT32) (~(0x7 << 13)), (UINT32) (0x0 << 13), StdHeader);
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x080, AccessWidth16, 0x00, ( 0x120 + PortNum), StdHeader);
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x09C, AccessWidth32, (UINT32) (~(0x7 << 9)), SquelchValue[PortNum], StdHeader);
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x080, AccessWidth16, 0x00, ( 0x110 + PortNum), StdHeader);
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x09C, AccessWidth32, (UINT32) (~(0x7 << 9)), SquelchValue[PortNum], StdHeader);
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x080, AccessWidth16, 0x00, 0x010, StdHeader);
+ }
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Family/Yangtze/YangtzeSataResetService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Family/Yangtze/YangtzeSataResetService.c
new file mode 100644
index 0000000..9b14467
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Family/Yangtze/YangtzeSataResetService.c
@@ -0,0 +1,125 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Sata controller
+ *
+ * Init Sata Controller features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 86582 $ @e \$Date: 2013-01-23 12:25:55 -0600 (Wed, 23 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_FAMILY_YANGTZE_YANGTZESATARESETSERVICE_FILECODE
+
+/**
+ * FchInitResetSataProgram - Config Sata controller during
+ * Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetSataProgram (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 FchSataMode;
+ UINT8 FchSataClkMode;
+
+ FCH_RESET_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ //
+ //New structure need calculate Sata Register value
+ //
+ FchSataMode = 0;
+ if ( LocalCfgPtr->FchReset.SataEnable ) {
+ FchSataMode |= 0x01;
+ }
+ if ( LocalCfgPtr->SataSetMaxGen2 ) {
+ FchSataMode |= 0x04;
+ }
+ FchSataMode |= 0x04;
+
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x0A0), AccessWidth8, (UINT32)~(BIT2 + BIT3 + BIT4 + BIT5 + BIT6), 0, StdHeader);
+ FchSataClkMode = LocalCfgPtr->SataClkMode;
+ //
+ // Sata Setting for clock mode only
+ //
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0xDA, AccessWidth8, 0, FchSataMode);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0xDA, AccessWidth8, 0x0F, (FchSataClkMode << 4));
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x084 + 3), AccessWidth8, (UINT32)~BIT2, BIT2, StdHeader);
+
+ //
+ // For Yangtze design (reference board) is connected both external and internal clock.
+ // Sata clock mode will set by AGESA FCH (FCH_RESET_DATA_BLOCK) SataClkMode.
+ //
+ switch ( FchSataClkMode ) {
+ case 0:
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x08C), AccessWidth32, 0xFFFFFF00, 0xF0, StdHeader);
+ break;
+ case 1:
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x08C), AccessWidth32, 0xFFFFFF00, 0x7D, StdHeader);
+ break;
+ case 9:
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x08C), AccessWidth32, 0xFFFFFF00, 0xF0, StdHeader);
+ break;
+ }
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x088), AccessWidth32, 0x0FFFFFFF, 0x20000000, StdHeader);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0xDC + 2, AccessWidth8, 0xFE, 0x01);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x084), AccessWidth32, 0xFFFFFFFB, 0x00, StdHeader);
+ FchStall (1000, StdHeader);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x084), AccessWidth32, 0xFFFFFFFF, 0x04, StdHeader);
+ if ( LocalCfgPtr->FchReset.SataEnable ) {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x04C), AccessWidth32, 0xFDFDFCFE, 0x02020301, StdHeader);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040), AccessWidth32, (UINT32) (~ (0x3 << 1)), (UINT32) (0x00 << 1), StdHeader);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x48), AccessWidth32, 0x00, 0xC0070800, StdHeader);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040), AccessWidth32, (UINT32) (~ (0x3 << 1)), (UINT32) (0x01 << 1), StdHeader);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x48), AccessWidth32, 0x00, 0x2188, StdHeader);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040), AccessWidth32, (UINT32) (~ (0x3 << 1)), (UINT32) (0x02 << 1), StdHeader);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x48), AccessWidth32, 0x00, 0x10EA, StdHeader);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040), AccessWidth32, (UINT32) (~ (0x1 << 13)), (UINT32) (0x01 << 13), StdHeader);
+
+ }
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Family/Yangtze/YangtzeSataService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Family/Yangtze/YangtzeSataService.c
new file mode 100644
index 0000000..ab3bbab
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Family/Yangtze/YangtzeSataService.c
@@ -0,0 +1,699 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Graphics Controller family specific service procedure
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87699 $ @e \$Date: 2013-02-07 12:51:09 -0600 (Thu, 07 Feb 2013) $
+ *
+ */
+
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*/
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_FAMILY_YANGTZE_YANGTZESATASERVICE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+UINT8 NumOfSataPorts = 2;
+
+/**
+ * FchSataGpioInitial - Sata GPIO function Procedure
+ *
+ * - Private function
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchSataGpioInitial (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 Bar5;
+ UINT32 FchSataBarRegDword;
+ UINT32 EMb;
+ UINT32 SataEMbVariableDword;
+ UINT8 FchSataSgpio0;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ Bar5 = 0;
+ EMb = 0;
+ FchSataSgpio0 = (UINT8) LocalCfgPtr->Sata.SataSgpio0;
+
+ SataBar5setting (LocalCfgPtr, &Bar5);
+ ReadMem (Bar5 + 0x1C , AccessWidth32, &FchSataBarRegDword);
+ EMb = (Bar5 + (( FchSataBarRegDword & 0xFFFF0000) >> 14));
+
+ if ( EMb ) {
+ SataEMbVariableDword = 0x03040C00;
+ WriteMem ( Bar5 + EMb, AccessWidth32, &SataEMbVariableDword);
+ SataEMbVariableDword = 0x00C08240;
+ WriteMem ( Bar5 + EMb + 4, AccessWidth32, &SataEMbVariableDword);
+ SataEMbVariableDword = 0x00000001;
+ WriteMem ( Bar5 + EMb + 8, AccessWidth32, &SataEMbVariableDword);
+
+ if ( FchSataSgpio0 ) {
+ SataEMbVariableDword = 0x00000060;
+ } else {
+ SataEMbVariableDword = 0x00000061;
+ }
+
+ WriteMem ( Bar5 + EMb + 0x0C, AccessWidth32, &SataEMbVariableDword);
+ RwMem ((Bar5 + 0x20), AccessWidth16, (UINT32)~(BIT8), BIT8);
+
+ do {
+ ReadMem (Bar5 + 0x20 , AccessWidth32, &FchSataBarRegDword);
+ FchSataBarRegDword = FchSataBarRegDword & BIT8;
+ } while ( FchSataBarRegDword != 0 );
+
+ SataEMbVariableDword = 0x03040F00;
+ WriteMem ( Bar5 + EMb, AccessWidth32, &SataEMbVariableDword);
+ SataEMbVariableDword = 0x00008240;
+ WriteMem ( Bar5 + EMb + 4, AccessWidth32, &SataEMbVariableDword);
+ SataEMbVariableDword = 0x00000002;
+ WriteMem ( Bar5 + EMb + 8, AccessWidth32, &SataEMbVariableDword);
+ SataEMbVariableDword = 0x00800000;
+ WriteMem ( Bar5 + EMb + 0x0C, AccessWidth32, &SataEMbVariableDword);
+ SataEMbVariableDword = 0x0F003700;
+ WriteMem ( Bar5 + EMb + 0x0C, AccessWidth32, &SataEMbVariableDword);
+ RwMem ((Bar5 + 0x20), AccessWidth16, (UINT32)~(BIT8), BIT8);
+
+ do {
+ ReadMem (Bar5 + 0x20 , AccessWidth32, &FchSataBarRegDword);
+ FchSataBarRegDword = FchSataBarRegDword & BIT8;
+ } while ( FchSataBarRegDword != 0 );
+ }
+}
+
+/**
+ * FchInitMidProgramSataRegs - Sata Pci Configuration Space
+ * register setting
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidProgramSataRegs (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 FchSataMsiCapability;
+ UINT8 FchSataTargetSupport8Device;
+ UINT8 FchSataDisableGenericMode;
+ UINT8 FchSataSgpio0;
+ UINT8 FchSataSgpio1;
+ UINT8 FchSataPhyPllShutDown;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ FchSataMsiCapability = (UINT8) LocalCfgPtr->Sata.SataMsiCapability;
+ FchSataTargetSupport8Device = (UINT8) LocalCfgPtr->Sata.SataTargetSupport8Device;
+ FchSataDisableGenericMode = (UINT8) LocalCfgPtr->Sata.SataDisableGenericMode;
+ FchSataSgpio0 = (UINT8) LocalCfgPtr->Sata.SataSgpio0;
+ FchSataSgpio1 = (UINT8) LocalCfgPtr->Sata.SataSgpio1;
+ FchSataPhyPllShutDown = (UINT8) LocalCfgPtr->Sata.SataPhyPllShutDown;
+
+ if ((LocalCfgPtr->Sata.SataClass == SataNativeIde) || (LocalCfgPtr->Sata.SataClass == SataLegacyIde)) {
+ FchSataMsiCapability = 0;
+ }
+ //
+ // Enabled SATA MSI capability
+ // SATA MSI and D3 Power State Capability MMC 0x2
+ //
+ if ( !FchSataMsiCapability ) {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x70 + 1), AccessWidth8, 0, 0, StdHeader);
+ }
+
+ //
+ // Sata Target Support 8 devices function
+ //
+ if ( FchSataTargetSupport8Device ) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0xDA, AccessWidth16, (UINT32)~BIT12, BIT12);
+ } else {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0xDA, AccessWidth16, (UINT32)~BIT12, 0x00);
+ }
+
+ //
+ // Sata Generic Mode setting
+ //
+ if ( FchSataDisableGenericMode ) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0xDA, AccessWidth16, (UINT32)~BIT13, BIT13);
+ } else {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0xDA, AccessWidth16, (UINT32)~BIT13, 0x00);
+ }
+
+ //
+ // Sata GPIO Initial
+ //
+ if ( FchSataSgpio0 ) {
+ FchSataGpioInitial ( LocalCfgPtr );
+ }
+
+ if ( FchSataSgpio1 ) {
+ FchSataGpioInitial ( LocalCfgPtr );
+ }
+
+ //
+ // Sata Phy Pll Shutdown setting
+ //
+ if ( FchSataPhyPllShutDown ) {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x87), AccessWidth8, (UINT32)~(BIT6), BIT6, StdHeader);
+ } else {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x87), AccessWidth8, (UINT32)~(BIT6), 0x00, StdHeader);
+ }
+
+ //RwPci (((SATA_BUS_DEV_FUN << 16) + 0x4C), AccessWidth32, (UINT32) (~ (0xF8 << 26)), (UINT32) (0xF8 << 26), StdHeader);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x084), AccessWidth32, (UINT32) ((UINT32)~ (0x01 << 31)), (UINT32) (0x00 << 31), StdHeader);
+
+ //
+ // OOB Detection Enhancement
+ //
+ if ( LocalCfgPtr->Sata.SataOobDetectionEnh ) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0xDC + 1, AccessWidth8, 0xFE, 0x01);
+ } else {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0xDC + 1, AccessWidth8, 0xFE, 0);
+ }
+
+ //
+ // E-Sata Power Saving Enhancement
+ //
+ //if ( LocalCfgPtr->Sata.SataPowerSavingEnh ) {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x04C + 3), AccessWidth8, (UINT32)~(BIT5), BIT5, StdHeader);
+ //} else {
+ // RwPci (((SATA_BUS_DEV_FUN << 16) + 0x4C + 3), AccessWidth8, (UINT32)~(BIT5), 0, StdHeader);
+ //}
+
+ //
+ // Sata Memory Power Saving
+ //
+ switch ( LocalCfgPtr->Sata.SataMemoryPowerSaving ) {
+ case 0:
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + 0x68 + 2, AccessWidth8, 0xFD, 0);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x04C), AccessWidth32, (UINT32) (~ (0x1801)), (UINT32) 0x0001, StdHeader);
+ break;
+ case 1:
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + 0x68 + 2, AccessWidth8, 0xFD, 0);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x04C), AccessWidth32, (UINT32) (~ (0x1801)), (UINT32) 0x0800, StdHeader);
+ break;
+ case 2:
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + 0x68 + 2, AccessWidth8, 0xFD, 0);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x04C), AccessWidth32, (UINT32) (~ (0x1801)), (UINT32) 0x0801, StdHeader);
+ break;
+ case 3:
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + 0x68 + 2, AccessWidth8, 0xFD, BIT1);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x04C), AccessWidth32, (UINT32) (~ (0x1801)), (UINT32) 0x0000, StdHeader);
+ }
+}
+
+
+/**
+ * FchInitLateProgramSataRegs - Sata Pci Configuration Space
+ * register setting
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateProgramSataRegs (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 PortNumByte;
+ UINT32 Bar5;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ SataBar5setting (LocalCfgPtr, &Bar5);
+ //
+ //Clear error status
+ //
+ RwMem ((Bar5 + 0x130), AccessWidth32, 0xFFFFFFFF, 0xFFFFFFFF);
+ RwMem ((Bar5 + 0x1B0), AccessWidth32, 0xFFFFFFFF, 0xFFFFFFFF);
+
+ for ( PortNumByte = 0; PortNumByte < NumOfSataPorts; PortNumByte++ ) {
+ RwMem ((Bar5 + 0x110 + (PortNumByte * 0x80)), AccessWidth32, 0xFFFFFFFF, 0x00);
+ }
+ if ( LocalCfgPtr->Sata.SataDevSlpPort0 ) {
+ RwMem (ACPI_MMIO_BASE + GPIO_BASE + FCH_GPIO_REG55, AccessWidth8, 0, 0x3E);
+ RwMem (ACPI_MMIO_BASE + IOMUX_BASE + FCH_GPIO_REG55, AccessWidth8, 0, 0x01);
+ RwMem ((Bar5 + 0x0F4), AccessWidth32, 0xFFFFFEEF, BIT4 + BIT8);
+ } else {
+ RwMem (ACPI_MMIO_BASE + IOMUX_BASE + FCH_GPIO_REG55, AccessWidth8, 0, 0x00);
+ RwMem ((Bar5 + 0x0F4), AccessWidth32, 0xFFFFFEFF, 0);
+ if ( !LocalCfgPtr->Sata.SataDevSlpPort1 ) {
+ RwMem ((Bar5 + 0x0F4), AccessWidth32, 0xFFFFFFEF, 0);
+ }
+ }
+ if ( LocalCfgPtr->Sata.SataDevSlpPort1 ) {
+ RwMem (ACPI_MMIO_BASE + GPIO_BASE + FCH_GPIO_REG59, AccessWidth8, 0, 0x3E);
+ RwMem (ACPI_MMIO_BASE + IOMUX_BASE + FCH_GPIO_REG59, AccessWidth8, 0, 0x01);
+ RwMem ((Bar5 + 0x0F4), AccessWidth32, 0xFFFFFDEF, BIT4 + BIT9);
+ } else {
+ RwMem (ACPI_MMIO_BASE + IOMUX_BASE + FCH_GPIO_REG59, AccessWidth8, 0, 0x00);
+ RwMem ((Bar5 + 0x0F4), AccessWidth32, 0xFFFFFDFF, 0);
+ if ( !LocalCfgPtr->Sata.SataDevSlpPort0 ) {
+ RwMem ((Bar5 + 0x0F4), AccessWidth32, 0xFFFFFFEF, 0);
+ }
+ }
+ if ( LocalCfgPtr->Sata.SataAhciDisPrefetchFunction ) {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040), AccessWidth32, (UINT32) (~ (0x01 << 13)), (UINT32) (0x01 << 13), StdHeader);
+ } else {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040), AccessWidth32, (UINT32) (~ (0x01 << 13)), 0, StdHeader);
+ }
+}
+
+/**
+ * sataBar5RegSet - Sata Bar5 register setting
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+SataBar5RegSet (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 AndMaskDword;
+ UINT32 OrMaskDword;
+ UINT32 Bar5;
+ UINT8 FchSataAggrLinkPmCap;
+ UINT8 FchSataPortMultCap;
+ UINT8 FchSataPscCap;
+ UINT8 FchSataSscCap;
+ UINT8 FchSataFisBasedSwitching;
+ UINT8 FchSataCccSupport;
+ UINT8 FchSataAhciEnclosureManagement;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ FchSataAggrLinkPmCap = (UINT8) LocalCfgPtr->Sata.SataAggrLinkPmCap;
+ FchSataPortMultCap = (UINT8) LocalCfgPtr->Sata.SataPortMultCap;
+ FchSataPscCap = (UINT8) LocalCfgPtr->Sata.SataPscCap;
+ FchSataSscCap = (UINT8) LocalCfgPtr->Sata.SataSscCap;
+ FchSataFisBasedSwitching = (UINT8) LocalCfgPtr->Sata.SataFisBasedSwitching;
+ FchSataCccSupport = (UINT8) LocalCfgPtr->Sata.SataCccSupport;
+ FchSataAhciEnclosureManagement = (UINT8) LocalCfgPtr->Sata.SataAhciEnclosureManagement;
+
+ AndMaskDword = 0;
+ OrMaskDword = 0;
+ Bar5 = 0;
+
+ SataBar5setting (LocalCfgPtr, &Bar5);
+
+ if ( !FchSataPortMultCap ) {
+ AndMaskDword |= BIT12;
+ }
+
+ if ( FchSataFisBasedSwitching ) {
+ AndMaskDword |= BIT10;
+ } else {
+ AndMaskDword |= BIT10;
+ }
+
+ if ( FchSataAggrLinkPmCap ) {
+ OrMaskDword |= BIT11;
+ } else {
+ AndMaskDword |= BIT11;
+ }
+
+ if ( FchSataPscCap ) {
+ OrMaskDword |= BIT1;
+ } else {
+ AndMaskDword |= BIT1;
+ }
+
+ if ( FchSataSscCap ) {
+ OrMaskDword |= BIT26;
+ } else {
+ AndMaskDword |= BIT26;
+ }
+
+ //
+ // Disabling CCC (Command Completion Coalescing) support.
+ //
+ if ( FchSataCccSupport ) {
+ OrMaskDword |= BIT19;
+ } else {
+ AndMaskDword |= BIT19;
+ }
+
+ if ( FchSataAhciEnclosureManagement ) {
+ OrMaskDword |= BIT27;
+ } else {
+ AndMaskDword |= BIT27;
+ }
+
+ RwMem ((Bar5 + 0x0FC), AccessWidth32, ~AndMaskDword, OrMaskDword);
+
+ //
+ // SATA ESP port setting
+ // These config bits are set for SATA driver to identify which ports are external SATA ports and need to
+ // support hotplug. If a port is set as an external SATA port and need to support hotplug, then driver will
+ // not enable power management (HIPM & DIPM) for these ports.
+ //
+ if ( LocalCfgPtr->Sata.SataEspPort.SataPortReg != 0 ) {
+ RwMem ((Bar5 + 0x0F8), AccessWidth32, ~(LocalCfgPtr->Sata.SataEspPort.SataPortReg), 0);
+ RwMem ((Bar5 + 0x0F8), AccessWidth32, 0xFF00FF00, (LocalCfgPtr->Sata.SataEspPort.SataPortReg << 16));
+ //
+ // External SATA Port Indication Registers
+ // If any of the ports was programmed as an external port, HCAP.SXS should also be set
+ //
+ RwMem ((Bar5 + 0x0FC), AccessWidth32, (UINT32)~(BIT20), BIT20);
+ } else {
+ //
+ // External SATA Port Indication Registers
+ // If any of the ports was programmed as an external port, HCAP.SXS should also be set (Clear for no ESP port)
+ //
+ RwMem ((Bar5 + 0x0F8), AccessWidth32, 0xFF00FF00, 0x00);
+ RwMem ((Bar5 + 0x0FC), AccessWidth32, (UINT32)~(BIT20), 0x00);
+ }
+
+ if ( FchSataFisBasedSwitching ) {
+ RwMem ((Bar5 + 0x0F8), AccessWidth32, 0x00FFFFFF, 0x00);
+ } else {
+ RwMem ((Bar5 + 0x0F8), AccessWidth32, 0x00FFFFFF, 0x00);
+ }
+
+ if ( LocalCfgPtr->Sata.BiosOsHandOff == 1 ) {
+ RwMem ((Bar5 + 0x24), AccessWidth8, (UINT32)~BIT0, BIT0);
+ } else {
+ RwMem ((Bar5 + 0x24), AccessWidth8, (UINT32)~BIT0, 0x00);
+ }
+}
+
+/**
+ * FchSataSetDeviceNumMsi - Program Sata controller support
+ * device number cap & MSI cap
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchSataSetDeviceNumMsi (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
+
+/**
+ * FchSataDriveDetection - Sata drive detection
+ *
+ * - Sata Ide & Sata Ide to Ahci only
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ * @param[in] *Bar5Ptr Sata BAR5 base address.
+ *
+ */
+VOID
+FchSataDriveDetection (
+ IN VOID *FchDataPtr,
+ IN UINT32 *Bar5Ptr
+ )
+{
+ UINT32 SataBarInfo;
+ UINT8 PortNumByte;
+ UINT8 SataPortType;
+ UINT16 IoBaseWord;
+ UINT32 SataLoopVarDWord;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ for ( PortNumByte = 0; PortNumByte < 4; PortNumByte++ ) {
+
+ ReadMem (*Bar5Ptr + 0x128 + PortNumByte * 0x80, AccessWidth32, &SataBarInfo);
+
+ if ( ( SataBarInfo & 0x0F ) == 0x03 ) {
+ if ( PortNumByte & BIT0 ) {
+ //
+ //this port belongs to secondary channel
+ //
+ ReadPci (((UINT32) (SATA_BUS_DEV_FUN << 16) + 0x18), AccessWidth16, &IoBaseWord, StdHeader);
+ } else {
+ //
+ //this port belongs to primary channel
+ //
+ ReadPci (((UINT32) (SATA_BUS_DEV_FUN << 16) + 0x10), AccessWidth16, &IoBaseWord, StdHeader);
+ }
+
+ //
+ //if legacy ide mode, then the bar registers don't contain the correct values. So we need to hardcode them
+ //
+ if ( LocalCfgPtr->Sata.SataClass == SataLegacyIde ) {
+ IoBaseWord = ( (0x170) | ((UINT16) ( (~((UINT8) (PortNumByte & BIT0) << 7)) & 0x80 )) );
+ }
+
+ if ( PortNumByte & BIT1 ) {
+ //
+ //this port is slave
+ //
+ SataPortType = 0xB0;
+ } else {
+ //
+ //this port is master
+ //
+ SataPortType = 0xA0;
+ }
+
+ IoBaseWord &= 0xFFF8;
+ LibAmdIoWrite (AccessWidth8, IoBaseWord + 6, &SataPortType, StdHeader);
+
+ //
+ //Wait in loop for 30s for the drive to become ready
+ //
+ for ( SataLoopVarDWord = 0; SataLoopVarDWord < 300000; SataLoopVarDWord++ ) {
+ LibAmdIoRead (AccessWidth8, IoBaseWord + 7, &SataPortType, StdHeader);
+ if ( (SataPortType & 0x88) == 0 ) {
+ break;
+ }
+ FchStall (100, StdHeader);
+ }
+ }
+ }
+}
+
+/**
+ * FchShutdownUnconnectedSataPortClock - Shutdown unconnected
+ * Sata port clock
+ *
+ * - Sata Ide & Sata Ide to Ahci only
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ * @param[in] Bar5 Sata BAR5 base address.
+ *
+ */
+VOID
+FchShutdownUnconnectedSataPortClock (
+ IN VOID *FchDataPtr,
+ IN UINT32 Bar5
+ )
+{
+ UINT8 PortNumByte;
+ UINT8 PortSataStatusByte;
+ UINT8 NumOfPorts;
+ UINT8 FchSataClkAutoOff;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+ UINT8 SaveLocation;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+ FchSataClkAutoOff = (UINT8) LocalCfgPtr->Sata.SataClkAutoOff;
+
+ NumOfPorts = 0;
+ //
+ // Enable SATA auto clock control by default
+ //
+ if ( FchSataClkAutoOff ) {
+ if ((ReadFchSleepType (StdHeader) != ACPI_SLPTYP_S3)) {
+ for ( PortNumByte = 0; PortNumByte < NumOfSataPorts; PortNumByte++ ) {
+ ReadMem (Bar5 + 0x128 + (PortNumByte * 0x80), AccessWidth8, &PortSataStatusByte);
+ //
+ // Shutdown the clock for the port and do the necessary port reporting changes.
+ // Error port status should be 1 not 3
+ //
+ if ( ((PortSataStatusByte & 0x0F) != 0x03) && (! ((LocalCfgPtr->Sata.SataEspPort.SataPortReg) & (1 << PortNumByte))) ) {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040 + 2), AccessWidth8, 0xFF, (1 << PortNumByte), StdHeader);
+ RwMem (Bar5 + 0x0C, AccessWidth8, ~(1 << PortNumByte), 00);
+ }
+ } ///end of for (PortNumByte=0;PortNumByte<6;PortNumByte++)
+ SaveLocation = 0;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REG72, &SaveLocation, StdHeader);
+ ReadPci (((SATA_BUS_DEV_FUN << 16) + 0x040 + 2), AccessWidth8, &PortSataStatusByte, StdHeader);
+ SaveLocation = 1;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REG73, &PortSataStatusByte, StdHeader);
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REG72, &SaveLocation, StdHeader);
+ ReadMem (Bar5 + 0x0C, AccessWidth8, &PortSataStatusByte);
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REG73, &PortSataStatusByte, StdHeader);
+ } else {
+ SaveLocation = 0;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REG72, &SaveLocation, StdHeader);
+ LibAmdIoRead (AccessWidth8, FCH_IOMAP_REG73, &PortSataStatusByte, StdHeader);
+ WritePci (((SATA_BUS_DEV_FUN << 16) + 0x040 + 2), AccessWidth8, &PortSataStatusByte, StdHeader);
+ SaveLocation = 1;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REG72, &SaveLocation, StdHeader);
+ LibAmdIoRead (AccessWidth8, FCH_IOMAP_REG73, &PortSataStatusByte, StdHeader);
+ RwMem (Bar5 + 0x0C, AccessWidth8, 0, PortSataStatusByte);
+ }
+ }
+
+ ReadMem (Bar5 + 0x0C, AccessWidth8, &PortSataStatusByte);
+
+ //
+ //if all ports are in disabled state, report at least one port
+ //
+ if ( (PortSataStatusByte & 0xFF) == 0) {
+ RwMem (Bar5 + 0x0C, AccessWidth8, (UINT32) ~(0xFF), 01);
+ }
+
+ ReadMem (Bar5 + 0x0C, AccessWidth8, &PortSataStatusByte);
+
+ for (PortNumByte = 0; PortNumByte < NumOfSataPorts; PortNumByte ++) {
+ if (PortSataStatusByte & (1 << PortNumByte)) {
+ NumOfPorts++;
+ }
+ }
+
+ if ( NumOfPorts == 0) {
+ NumOfPorts = 0x01;
+ }
+
+ RwMem (Bar5 + 0x00, AccessWidth8, 0xE0, NumOfPorts - 1);
+}
+
+/**
+ * FchSataSetPortGenMode - Set Sata port mode (each) for
+ * Gen1/Gen2/Gen3
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchSataSetPortGenMode (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 Bar5;
+ UINT8 PortNumByte;
+ UINT8 PortModeByte;
+ UINT16 SataPortMode;
+ BOOLEAN FchSataHotRemovalEnh;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ FchSataHotRemovalEnh = LocalCfgPtr->Sata.SataHotRemovalEnh;
+
+ SataBar5setting (LocalCfgPtr, &Bar5);
+ SataPortMode = (UINT16)LocalCfgPtr->Sata.SataPortMd.SataPortMode;
+ PortNumByte = 0;
+
+ while ( PortNumByte < 8 ) {
+ PortModeByte = (UINT8) (SataPortMode & 3);
+ if ( (PortModeByte == BIT0) || (PortModeByte == BIT1) ) {
+ if ( PortModeByte == BIT0 ) {
+ //
+ // set GEN 1
+ //
+ RwMem (Bar5 + 0x12C + PortNumByte * 0x80, AccessWidth8, 0x0F, 0x10);
+ }
+
+ if ( PortModeByte == BIT1 ) {
+ //
+ // set GEN2 (default is GEN3)
+ //
+ RwMem (Bar5 + 0x12C + PortNumByte * 0x80, AccessWidth8, 0x0F, 0x20);
+ }
+
+ RwMem (Bar5 + 0x12C + PortNumByte * 0x80, AccessWidth8, 0xFF, 0x01);
+ }
+
+ SataPortMode >>= 2;
+ PortNumByte ++;
+ }
+
+ FchStall (1000, StdHeader);
+ SataPortMode = (UINT16)LocalCfgPtr->Sata.SataPortMd.SataPortMode;
+ PortNumByte = 0;
+
+ while ( PortNumByte < 8 ) {
+ PortModeByte = (UINT8) (SataPortMode & 3);
+
+ if ( (PortModeByte == BIT0) || (PortModeByte == BIT1) ) {
+ RwMem (Bar5 + 0x12C + PortNumByte * 0x80, AccessWidth8, 0xFE, 0x00);
+ }
+
+ PortNumByte ++;
+ SataPortMode >>= 2;
+ }
+
+ //
+ // Sata Hot Removal Enhance setting
+ //
+ if ( FchSataHotRemovalEnh ) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + 0xDC, AccessWidth8, 0x7F, 0x80);
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Ide2AhciEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Ide2AhciEnv.c
new file mode 100644
index 0000000..517bec0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Ide2AhciEnv.c
@@ -0,0 +1,82 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA controller (Ide2Ahci mode)
+ *
+ * Init SATA Ide2Ahci features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_IDE2AHCIENV_FILECODE
+
+/**
+ * FchInitEnvSataIde2Ahci - Config SATA Ide2Ahci controller
+ * before PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvSataIde2Ahci (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ //
+ // Class code
+ //
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x08), AccessWidth32, 0, 0x01018F40, StdHeader);
+ //
+ // Device ID
+ //
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x02), AccessWidth16, 0, FCH_SATA_DID, StdHeader);
+ //
+ // SSID
+ //
+ if (LocalCfgPtr->Sata.SataAhciSsid != 0 ) {
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x2C, AccessWidth32, 0x00, LocalCfgPtr->Sata.SataAhciSsid, StdHeader);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Ide2AhciLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Ide2AhciLate.c
new file mode 100644
index 0000000..2d11bc0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Ide2AhciLate.c
@@ -0,0 +1,89 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA controller (Ide2Ahci mode)
+ *
+ * Init SATA Ide2Ahci features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_IDE2AHCILATE_FILECODE
+
+/**
+ * FchInitLateSataIde2Ahci - Prepare SATA Ide2Ahci controller to
+ * boot to OS.
+ *
+ * - Set class ID to Ide2Ahci (if set to Ide2Ahci * Mode)
+ * - Enable Ide2Ahci interrupt
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateSataIde2Ahci (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 Bar5;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ //
+ //program the AHCI class code
+ //
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x08), AccessWidth32, 0, 0x01060100, StdHeader);
+ //
+ // Device ID
+ //
+ if ( LocalCfgPtr->Sata.SataClass == SataIde2Ahci7804 ) {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x02), AccessWidth16, 0, FCH_SATA_AMDAHCI_DID, StdHeader);
+ } else {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x02), AccessWidth16, 0, FCH_SATA_AHCI_DID, StdHeader);
+ }
+ SataBar5setting (LocalCfgPtr, &Bar5);
+
+ //
+ //Set interrupt enable bit
+ //
+ RwMem ((Bar5 + 0x04), AccessWidth8, (UINT32)~0, BIT1);
+ ShutdownUnconnectedSataPortClock (LocalCfgPtr, Bar5);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Ide2AhciLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Ide2AhciLib.c
new file mode 100644
index 0000000..dd57198
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Ide2AhciLib.c
@@ -0,0 +1,67 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Fch SATA Ide2Ahci controller Library
+ *
+ * SATA Ide2Ahci Library
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_IDE2AHCILIB_FILECODE
+
+/**
+ * sataIde2AhciSetDeviceNumMsi - Program Ide2Ahci controller support
+ * device number cap & MSI cap
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+SataIde2AhciSetDeviceNumMsi (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_INTERFACE *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_INTERFACE *)FchDataPtr;
+
+ SataSetDeviceNumMsi (LocalCfgPtr);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Ide2AhciMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Ide2AhciMid.c
new file mode 100644
index 0000000..c4eb4ce
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/Ide2AhciMid.c
@@ -0,0 +1,76 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA controller (Ide2Ahci mode)
+ *
+ * Init SATA Ide2Ahci features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_IDE2AHCIMID_FILECODE
+
+/**
+ * FchInitMidSataIde2Ahci - Config SATA Ide2Ahci controller
+ * after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidSataIde2Ahci (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 Bar5;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ SataIde2AhciSetDeviceNumMsi (LocalCfgPtr);
+
+ SataBar5setting (LocalCfgPtr, &Bar5);
+ //
+ //If this is not S3 resume and also if SATA set to one of IDE mode, them implement drive detection workaround.
+ //
+ if ( ! (LocalCfgPtr->Misc.S3Resume) ) {
+ SataDriveDetection (LocalCfgPtr, &Bar5);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/RaidEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/RaidEnv.c
new file mode 100644
index 0000000..d91a572
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/RaidEnv.c
@@ -0,0 +1,74 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA controller (Raid mode)
+ *
+ * Init SATA Raid features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_RAIDENV_FILECODE
+
+
+//
+// Declaration of local functions
+//
+
+/**
+ * FchInitEnvSataRaid - Config SATA Raid controller before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvSataRaid (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/RaidLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/RaidLate.c
new file mode 100644
index 0000000..0de856d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/RaidLate.c
@@ -0,0 +1,65 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA controller (Raid mode)
+ *
+ * Init SATA Raid features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_RAIDLATE_FILECODE
+//
+// Declaration of local functions
+//
+
+/**
+ * FchInitLateSataRaid - Prepare SATA Raid controller to boot to
+ * OS.
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateSataRaid (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/RaidLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/RaidLib.c
new file mode 100644
index 0000000..26daf80
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/RaidLib.c
@@ -0,0 +1,69 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Fch SATA AHCI/RAID controller Library
+ *
+ * SATA AHCI/RAID Library
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_RAIDLIB_FILECODE
+
+/**
+ * sataRaidSetDeviceNumMsi - Program RAID controller support
+ * device number cap & MSI cap
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+SataRaidSetDeviceNumMsi (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_INTERFACE *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_INTERFACE *)FchDataPtr;
+
+ SataSetDeviceNumMsi (LocalCfgPtr);
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/RaidMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/RaidMid.c
new file mode 100644
index 0000000..68af1ba
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/RaidMid.c
@@ -0,0 +1,74 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA controller (Raid mode)
+ *
+ * Init SATA Raid features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_RAIDMID_FILECODE
+//
+// Declaration of local functions
+//
+
+/**
+ * FchInitMidSataRaid - Config SATA Raid controller after PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidSataRaid (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 Bar5;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ SataRaidSetDeviceNumMsi (LocalCfgPtr);
+ SataBar5setting (LocalCfgPtr, &Bar5);
+ ShutdownUnconnectedSataPortClock (LocalCfgPtr, Bar5);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataEnv.c
new file mode 100644
index 0000000..a5d83cf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataEnv.c
@@ -0,0 +1,104 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA controller
+ *
+ * Init SATA features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_SATAENV_FILECODE
+
+
+/**
+ * FchInitEnvSata - Config SATA controller before PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvSata (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ if ( LocalCfgPtr->Sata.SataMode.SataEnable == 0 ) {
+ return; //return if SATA controller is disabled.
+ }
+
+ FchInitEnvProgramSataPciRegs (FchDataPtr);
+ //
+ // Call Sub-function for each Sata mode
+ //
+ if (( LocalCfgPtr->Sata.SataClass == SataAhci7804) || (LocalCfgPtr->Sata.SataClass == SataAhci )) {
+ FchInitEnvSataAhci ( LocalCfgPtr );
+ }
+
+ if (( LocalCfgPtr->Sata.SataClass == SataIde2Ahci) || (LocalCfgPtr->Sata.SataClass == SataIde2Ahci7804 )) {
+ FchInitEnvSataIde2Ahci ( LocalCfgPtr );
+ }
+
+ if (( LocalCfgPtr->Sata.SataClass == SataNativeIde) || (LocalCfgPtr->Sata.SataClass == SataLegacyIde )) {
+ FchInitEnvSataIde ( LocalCfgPtr );
+ }
+
+ if ( LocalCfgPtr->Sata.SataClass == SataRaid) {
+ FchInitEnvSataRaid ( LocalCfgPtr );
+ }
+
+ //
+ // SATA IRQ Resource
+ //
+ SataSetIrqIntResource (LocalCfgPtr, StdHeader);
+
+ //
+ // SATA PHY Programming Sequence
+ //
+ FchProgramSataPhy (StdHeader);
+
+ SataDisableWriteAccess (StdHeader);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataEnvLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataEnvLib.c
new file mode 100644
index 0000000..7c6f7aa
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataEnvLib.c
@@ -0,0 +1,88 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Fch SATA controller Library
+ *
+ * SATA Library
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_SATAENVLIB_FILECODE
+
+/**
+ * sataSetIrqIntResource - Config SATA IRQ/INT# resource
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ * @param[in] StdHeader
+ *
+ */
+VOID
+SataSetIrqIntResource (
+ IN VOID *FchDataPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 ValueByte;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ //
+ // IRQ14/IRQ15 come from IDE or SATA
+ //
+ ValueByte = 0x08;
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &ValueByte, StdHeader);
+ LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGC01, &ValueByte, StdHeader);
+ ValueByte = ValueByte & 0x0F;
+
+ if (LocalCfgPtr->Sata.SataClass == SataLegacyIde) {
+ ValueByte = ValueByte | 0x50;
+ } else {
+ if (LocalCfgPtr->Sata.SataIdeMode == 1) {
+ //
+ // Both IDE & SATA set to Native mode
+ //
+ ValueByte = ValueByte | 0xF0;
+ }
+ }
+
+ LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, &ValueByte, StdHeader);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataIdeEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataIdeEnv.c
new file mode 100644
index 0000000..11303a0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataIdeEnv.c
@@ -0,0 +1,100 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA (IDE mode) controller
+ *
+ * Init SATA IDE (Native IDE) mode features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_SATAIDEENV_FILECODE
+
+/**
+ * FchInitEnvSataIde - Config SATA IDE controller before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvSataIde (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 ChannelByte;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ //
+ // Class code
+ //
+ if ( LocalCfgPtr->Sata.SataClass == SataLegacyIde ) {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x08), AccessWidth32, 0, 0x01018A40, StdHeader);
+ } else {
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x08), AccessWidth32, 0, 0x01018F40, StdHeader);
+ }
+ //
+ // Device ID
+ //
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x02), AccessWidth16, 0, FCH_SATA_DID, StdHeader);
+ //
+ // SSID
+ //
+ if (LocalCfgPtr->Sata.SataIdeSsid != 0 ) {
+ RwPci ((SATA_BUS_DEV_FUN << 16) + 0x2C, AccessWidth32, 0x00, LocalCfgPtr->Sata.SataIdeSsid, StdHeader);
+ }
+ ChannelByte = 0x00;
+ ReadPci (((SATA_BUS_DEV_FUN << 16) + 0x48 + 3), AccessWidth8, &ChannelByte, StdHeader);
+ ChannelByte &= 0xCF;
+
+ if ( LocalCfgPtr->Sata.SataDisUnusedIdePChannel ) {
+ ChannelByte |= 0x10;
+ }
+
+ if ( LocalCfgPtr->Sata.SataDisUnusedIdeSChannel ) {
+ ChannelByte |= 0x20;
+ }
+
+ WritePci (((SATA_BUS_DEV_FUN << 16) + 0x48 + 3), AccessWidth8, &ChannelByte, StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataIdeLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataIdeLate.c
new file mode 100644
index 0000000..0366ea4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataIdeLate.c
@@ -0,0 +1,71 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA (IDE mode) controller
+ *
+ * Init SATA IDE (Native IDE) mode features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_SATAIDELATE_FILECODE
+
+/**
+ * FchInitLateSataIde - Prepare SATA controller to boot to OS.
+ *
+ * - Set class ID to AHCI (if set to AHCI * Mode)
+ * - Enable AHCI interrupt
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateSataIde (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 Bar5;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ SataBar5setting (LocalCfgPtr, &Bar5);
+ ShutdownUnconnectedSataPortClock (LocalCfgPtr, Bar5);
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataIdeLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataIdeLib.c
new file mode 100644
index 0000000..24e18ac
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataIdeLib.c
@@ -0,0 +1,46 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Fch SATA Ide controller Library
+ *
+ * SATA Ide2Ahci Library
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_SATAIDELIB_FILECODE
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataIdeMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataIdeMid.c
new file mode 100644
index 0000000..6be38a5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataIdeMid.c
@@ -0,0 +1,75 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA (IDE mode) controller
+ *
+ * Init SATA IDE (Native IDE) mode features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_SATAIDEMID_FILECODE
+
+/**
+ * FchInitMidSataIde - Config SATA controller after PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidSataIde (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 Bar5;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ Bar5 = 0;
+ SataBar5setting (LocalCfgPtr, &Bar5);
+ //
+ //If this is not S3 resume and also if SATA set to one of IDE mode, them implement drive detection workaround.
+ //
+ if ( ! (LocalCfgPtr->Misc.S3Resume) ) {
+ SataDriveDetection (LocalCfgPtr, &Bar5);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataLate.c
new file mode 100644
index 0000000..b732baa
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataLate.c
@@ -0,0 +1,116 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA controller
+ *
+ * Init SATA features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_SATALATE_FILECODE
+
+/**
+ * FchInitLateSata - Prepare SATA controller to boot to OS.
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateSata (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 SataPciCommandByte;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ //
+ //Return immediately is sata controller is not enabled
+ //
+ if ( LocalCfgPtr->Sata.SataMode.SataEnable == 0 ) {
+ return;
+ }
+
+ //
+ // Set Sata PCI Configuration Space Write enable
+ //
+ SataEnableWriteAccess (StdHeader);
+
+ //
+ // Set Sata Controller Memory & IO access enable
+ //
+ ReadPci (((SATA_BUS_DEV_FUN << 16) + 0x04), AccessWidth8, &SataPciCommandByte, StdHeader);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x04), AccessWidth8, 0xFF, 0x03, StdHeader);
+
+ //
+ // Call Sub-function for each Sata mode
+ //
+ if (( LocalCfgPtr->Sata.SataClass == SataAhci7804) || (LocalCfgPtr->Sata.SataClass == SataAhci )) {
+ FchInitLateSataAhci ( LocalCfgPtr );
+ }
+
+ if (( LocalCfgPtr->Sata.SataClass == SataIde2Ahci) || (LocalCfgPtr->Sata.SataClass == SataIde2Ahci7804 )) {
+ FchInitLateSataIde2Ahci ( LocalCfgPtr );
+ }
+
+ if (( LocalCfgPtr->Sata.SataClass == SataNativeIde) || (LocalCfgPtr->Sata.SataClass == SataLegacyIde )) {
+ FchInitLateSataIde ( LocalCfgPtr );
+ }
+
+ if ( LocalCfgPtr->Sata.SataClass == SataRaid) {
+ FchInitLateSataRaid ( LocalCfgPtr );
+ }
+
+ FchInitLateProgramSataRegs ( LocalCfgPtr );
+
+ //
+ // Restore Sata Controller Memory & IO access status
+ //
+ WritePci (((SATA_BUS_DEV_FUN << 16) + 0x04), AccessWidth8, &SataPciCommandByte, StdHeader);
+
+ //
+ // Set Sata PCI Configuration Space Write disable
+ //
+ SataDisableWriteAccess (StdHeader);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataLib.c
new file mode 100644
index 0000000..0b88aa7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataLib.c
@@ -0,0 +1,258 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Fch SATA controller Library
+ *
+ * SATA Library
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84857 $ @e \$Date: 2012-12-20 16:43:46 -0600 (Thu, 20 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_SATALIB_FILECODE
+
+/**
+ * sataBar5setting - Config SATA BAR5
+ *
+ *
+ * @param[in] FchDataPtr - Fch configuration structure pointer.
+ * @param[in] *Bar5Ptr - SATA BAR5 buffer.
+ *
+ */
+VOID
+SataBar5setting (
+ IN VOID *FchDataPtr,
+ IN UINT32 *Bar5Ptr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ //
+ //Get BAR5 value
+ //
+ ReadPci (((SATA_BUS_DEV_FUN << 16) + 0x24), AccessWidth32, Bar5Ptr, StdHeader);
+
+ //
+ //Assign temporary BAR if is not already assigned
+ //
+ if ( (*Bar5Ptr == 0) || (*Bar5Ptr == - 1) ) {
+ //
+ //assign temporary BAR5
+ //
+ if ( (LocalCfgPtr->Sata.TempMmio == 0) || (LocalCfgPtr->Sata.TempMmio == - 1) ) {
+ *Bar5Ptr = 0xFEC01000;
+ } else {
+ *Bar5Ptr = LocalCfgPtr->Sata.TempMmio;
+ }
+ WritePci (((SATA_BUS_DEV_FUN << 16) + 0x24), AccessWidth32, Bar5Ptr, StdHeader);
+ }
+
+ //
+ //Clear Bits 9:0
+ //
+ *Bar5Ptr = *Bar5Ptr & 0xFFFFFC00;
+}
+
+/**
+ * sataEnableWriteAccess - Enable Sata PCI configuration space
+ *
+ * @param[in] StdHeader
+ *
+ */
+VOID
+SataEnableWriteAccess (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ //
+ // BIT0 Enable write access to PCI header
+ //
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040), AccessWidth8, 0xff, BIT0, StdHeader);
+}
+
+/**
+ * sataDisableWriteAccess - Disable Sata PCI configuration space
+ *
+ * @param[in] StdHeader
+ *
+ */
+VOID
+SataDisableWriteAccess (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ //
+ // Disable write access to PCI header
+ //
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x040), AccessWidth8, (UINT32)~BIT0, 0, StdHeader);
+}
+
+
+
+#ifdef SATA_BUS_DEV_FUN_FPGA
+
+/**
+ * FchSataBar5settingFpga
+ *
+ * @param[in] LocalCfgPtr
+ * @param[in] Bar5
+ *
+ */
+VOID
+FchSataBar5settingFpga (
+ IN FCH_DATA_BLOCK *LocalCfgPtr,
+ IN UINT32 *Bar5
+ )
+{
+ UINT8 Value;
+
+ //Get BAR5 value
+ ReadPci (((SATA_BUS_DEV_FUN_FPGA << 16) + 0x24), AccWidthUint32, Bar5);
+
+ //Assign temporary BAR if is not already assigned
+ if ( (*Bar5 == 0) || (*Bar5 == - 1) ) {
+ //assign temporary BAR5
+ if ( (LocalCfgPtr->Sata.TempMMIO == 0) || (LocalCfgPtr->Sata.TempMMIO == - 1) ) {
+ *Bar5 = 0xFEC01000;
+ } else {
+ *Bar5 = LocalCfgPtr->Sata.TempMMIO;
+ }
+ WritePci (((SATA_BUS_DEV_FUN_FPGA << 16) + 0x24), AccWidthUint32, Bar5);
+ }
+
+ //Clear Bits 9:0
+ *Bar5 = *Bar5 & 0xFFFFFC00;
+ Value = 0x07;
+ WritePci (((SATA_BUS_DEV_FUN_FPGA << 16) + 0x04), AccWidthUint8, &Value);
+ WritePci (((PCIB_BUS_DEV_FUN << 16) + 0x04), AccWidthUint8, &Value);
+}
+
+/**
+ * FchSataDriveDetectionFpga
+ *
+ * @param[in] LocalCfgPtr
+ * @param[in] Bar5
+ *
+ */
+VOID
+FchSataDriveDetectionFpga (
+ IN FCH_DATA_BLOCK *LocalCfgPtr,
+ IN UINT32 *Bar5
+ )
+{
+ UINT32 SataBarFpgaInfo;
+ UINT8 PortNum;
+ UINT8 SataFpaPortType;
+ UINT16 IoBase;
+ UINT32 SataFpgaLoopVarWord;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ TRACE ((DMSG_FCH_TRACE, "FCH - Entering sata drive detection procedure\n\n"));
+ TRACE ((DMSG_FCH_TRACE, "SATA BAR5 is %X \n", *pBar5));
+
+ for ( PortNum = 0; PortNum < 4; PortNum++ ) {
+ ReadMem (*Bar5 + FCH_SATA_BAR5_REG128 + PortNum * 0x80, AccWidthUint32, &SataBarFpgaInfo);
+ if ( ( SataBarFpgaInfo & 0x0F ) == 0x03 ) {
+ if ( PortNum & BIT0 ) {
+ //this port belongs to secondary channel
+ ReadPci (((UINT32) (SATA_BUS_DEV_FUN_FPGA << 16) + 0x18), AccWidthUint16, &IoBase);
+ } else {
+ //this port belongs to primary channel
+ ReadPci (((UINT32) (SATA_BUS_DEV_FUN_FPGA << 16) + 0x10), AccWidthUint16, &IoBase);
+ }
+
+ //if legacy ide mode, then the bar registers don't contain the correct values. So we need to hardcode them
+ if ( LocalCfgPtr->Sata.SataClass == SataLegacyIde ) {
+ IoBase = ( (0x170) | ((UINT16) ( (~((UINT8) (PortNum & BIT0) << 7)) & 0x80 )) );
+ }
+
+ if ( PortNum & BIT1 ) {
+ //this port is slave
+ SataFpaPortType = 0xB0;
+ } else {
+ //this port is master
+ SataFpaPortType = 0xA0;
+ }
+
+ IoBase &= 0xFFF8;
+ LibAmdIoWrite (AccessWidth8, IoBase + 6, &SataFpaPortType, StdHeader);
+
+ //Wait in loop for 30s for the drive to become ready
+ for ( SataFpgaLoopVarWord = 0; SataFpgaLoopVarWord < 300000; SataFpgaLoopVarWord++ ) {
+ LibAmdIoRead (AccessWidth8, IoBase + 7, &SataFpaPortType, StdHeader);
+ if ( (SataFpaPortType & 0x88) == 0 ) {
+ break;
+ }
+ FchStall (100, StdHeader);
+ }
+ }
+ }
+}
+
+/**
+ * FchSataDriveFpga -
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchSataDriveFpga (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 Bar5;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ Bar5 = 0;
+ SataBar5setting (LocalCfgPtr, &Bar5);
+
+ FchSataBar5settingFpga (LocalCfgPtr, &Bar5);
+ FchSataDriveDetectionFpga (LocalCfgPtr, &Bar5);
+}
+
+#endif
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataMid.c
new file mode 100644
index 0000000..7a13a1c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataMid.c
@@ -0,0 +1,196 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SATA controller
+ *
+ * Init SATA features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_SATAMID_FILECODE
+
+/**
+ * FchInitMidSata - Config SATA controller after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidSata (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 SataPciCommandByte;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ if ( LocalCfgPtr->Sata.SataMode.SataEnable == 0 ) {
+ return; ///return if SATA controller is disabled.
+ }
+
+ //
+ // Set Sata PCI Configuration Space Write enable
+ //
+ SataEnableWriteAccess (StdHeader);
+
+ //
+ // Set Sata Controller Memory & IO access enable
+ //
+ ReadPci (((SATA_BUS_DEV_FUN << 16) + 0x04), AccessWidth8, &SataPciCommandByte, StdHeader);
+ RwPci (((SATA_BUS_DEV_FUN << 16) + 0x04), AccessWidth8, 0xFF, 0x03, StdHeader);
+
+ //
+ // Sata Bar5 register setting for Index 0xFC
+ //
+ SataBar5RegSet ( LocalCfgPtr );
+
+ FchInitMidProgramSataRegs ( LocalCfgPtr );
+
+ //
+ // Set Sata port mode (each) for Gen1/Gen2/Gen3
+ //
+ SataSetPortGenMode ( LocalCfgPtr );
+
+ //
+ // Call Sub-function for each Sata mode
+ //
+ if (( LocalCfgPtr->Sata.SataClass == SataAhci7804) || (LocalCfgPtr->Sata.SataClass == SataAhci )) {
+ FchInitMidSataAhci ( LocalCfgPtr );
+ }
+
+ if (( LocalCfgPtr->Sata.SataClass == SataIde2Ahci) || (LocalCfgPtr->Sata.SataClass == SataIde2Ahci7804 )) {
+ FchInitMidSataIde2Ahci ( LocalCfgPtr );
+ }
+
+ if (( LocalCfgPtr->Sata.SataClass == SataNativeIde) || (LocalCfgPtr->Sata.SataClass == SataLegacyIde )) {
+ FchInitMidSataIde ( LocalCfgPtr );
+ }
+
+ if ( LocalCfgPtr->Sata.SataClass == SataRaid) {
+ FchInitMidSataRaid ( LocalCfgPtr );
+ }
+
+#ifdef SATA_BUS_DEV_FUN_FPGA
+ FchSataDriveFpga ( LocalCfgPtr );
+#endif
+
+ //
+ // Restore Sata Controller Memory & IO access status
+ //
+ WritePci (((SATA_BUS_DEV_FUN << 16) + 0x04), AccessWidth8, &SataPciCommandByte, StdHeader);
+
+ //
+ // Set Sata PCI Configuration Space Write disable
+ //
+ SataDisableWriteAccess (StdHeader);
+}
+
+/**
+ * SataSetDeviceNumMsi - Program Sata controller support device
+ * number cap & MSI cap
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+SataSetDeviceNumMsi (
+ IN VOID *FchDataPtr
+ )
+{
+ FchSataSetDeviceNumMsi ( FchDataPtr );
+}
+
+/**
+ * SataDriveDetection - Sata drive detection
+ *
+ * - Sata Ide & Sata Ide to Ahci only
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ * @param[in] *Bar5Ptr Sata BAR5 base address.
+ *
+ */
+VOID
+SataDriveDetection (
+ IN VOID *FchDataPtr,
+ IN UINT32 *Bar5Ptr
+ )
+{
+ FchSataDriveDetection ( FchDataPtr, Bar5Ptr );
+}
+
+/**
+ * shutdownUnconnectedSataPortClock - Shutdown unconnected Sata port clock
+ *
+ * - Sata Ide & Sata Ide to Ahci only
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ * @param[in] Bar5 Sata BAR5 base address.
+ *
+ */
+VOID
+ShutdownUnconnectedSataPortClock (
+ IN VOID *FchDataPtr,
+ IN UINT32 Bar5
+ )
+{
+ FchShutdownUnconnectedSataPortClock ( FchDataPtr, Bar5);
+}
+
+/**
+ * SataSetPortGenMode - Set Sata port mode (each) for
+ * Gen1/Gen2/Gen3
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+SataSetPortGenMode (
+ IN VOID *FchDataPtr
+ )
+{
+ FchSataSetPortGenMode ( FchDataPtr );
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataReset.c
new file mode 100644
index 0000000..70452dc
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sata/SataReset.c
@@ -0,0 +1,63 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Sata controller
+ *
+ * Init Sata Controller features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SATA_SATARESET_FILECODE
+
+/**
+ * FchInitResetSata - Config Sata controller during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetSata (
+ IN VOID *FchDataPtr
+ )
+{
+ FchInitResetSataProgram ( FchDataPtr );
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/Family/Yangtze/YangtzeSdEnvService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/Family/Yangtze/YangtzeSdEnvService.c
new file mode 100644
index 0000000..e9ded68
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/Family/Yangtze/YangtzeSdEnvService.c
@@ -0,0 +1,129 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze SD
+ *
+ * Init SD Controller.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 88054 $ @e \$Date: 2013-02-15 10:57:15 -0600 (Fri, 15 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SD_FAMILY_YANGTZE_YANGTZESDENVSERVICE_FILECODE
+/**
+ * FchInitEnvSdProgram - Config SD controller before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvSdProgram (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 SdData32;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+ UINT32 Sd30Control;
+ UINT8 ApuStepping;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+ ApuStepping = (UINT8) LocalCfgPtr->Misc.FchCpuId;
+ //
+ // SD Configuration
+ //
+ if ( LocalCfgPtr->Sd.SdConfig != SdDisable) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGE8, AccessWidth8, 0xFE, BIT0);
+ Sd30Control = 0;
+ SdData32 = 0x30FE00B2;
+ ReadPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGA4, AccessWidth32, &SdData32, StdHeader);
+ SdData32 &= 0xEFDF00FF;
+ SdData32 |= BIT19 + BIT22 + BIT20; ///ADMA
+
+ if ( LocalCfgPtr->Sd.SdConfig == SdDma) {
+ SdData32 &= ~(BIT20 + BIT19); ///DMA
+ } else if ( LocalCfgPtr->Sd.SdConfig == SdPio) {
+ SdData32 &= ~(BIT20 + BIT22 + BIT19); ///PIO
+ }
+ SdData32 |= (LocalCfgPtr->Sd.SdSpeed << 21) + (LocalCfgPtr->Sd.SdBitWidth << 28);
+ SdData32 |= BIT24;
+ if ( LocalCfgPtr->Sd.SdHostControllerVersion == 1) {
+ SdData32 |= 0x3200;
+ if ( (ApuStepping & 0x0F) == 0) {
+ SdData32 &= ~BIT21;
+ }
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGB0, AccessWidth32, (UINT32) (~ (0x03 << 24)), (UINT32) (0x01 << 24), StdHeader);
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGB0, AccessWidth32, (UINT32) (~ (0xFF)), (UINT32) 0x19, StdHeader);
+ } else {
+ if ( LocalCfgPtr->Sd.SdHostControllerVersion == 2) {
+ SdData32 |= 0xC800;
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGB0, AccessWidth32, (UINT32) (~ (0x03 << 24)), (UINT32) (0x02 << 24), StdHeader);
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGB0, AccessWidth32, (UINT32) (~ (0xFF)), (UINT32) 0x19, StdHeader);
+ }
+ }
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGA4, AccessWidth32, 0, SdData32, StdHeader);
+
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGB0, AccessWidth32, (UINT32) (~ (0x03 << 10)), (UINT32) (0x03 << 10), StdHeader);
+ if (LocalCfgPtr->Sd.SdSsid != 0 ) {
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REG2C, AccessWidth32, 0, LocalCfgPtr->Sd.SdSsid, StdHeader);
+ }
+ if ( LocalCfgPtr->Sd.SdClockMultiplier ) {
+ Sd30Control |= (BIT16 + BIT17);
+ }
+ Sd30Control &= ~(BIT0 + BIT1);
+ Sd30Control |= LocalCfgPtr->Sd.SdrCapabilities;
+ Sd30Control |= LocalCfgPtr->Sd.SdReTuningMode << 14;
+ if ( LocalCfgPtr->Sd.SdHostControllerVersion == 2) {
+ Sd30Control &= 0xFFFF00FF;
+ Sd30Control |= ( BIT4 + BIT5 + BIT6 + BIT8 + BIT10 + BIT13 );
+ }
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGD0 + 1, AccessWidth8, 0xFD, BIT1, StdHeader);
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGA8, AccessWidth32, 0x3FFC, Sd30Control, StdHeader);
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGB0 + 3, AccessWidth8, 0, LocalCfgPtr->Sd.SdHostControllerVersion, StdHeader);
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGBC, AccessWidth32, 0, 0x0044CC98, StdHeader);
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGF0, AccessWidth32, 0, 0x000400FA, StdHeader);
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGF4, AccessWidth32, 0, 0x00040002, StdHeader);
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGF8, AccessWidth32, 0, 0x00010002, StdHeader);
+ RwPci ((SD_BUS_DEV_FUN << 16) + SD_PCI_REGFC, AccessWidth32, 0, 0x00014000, StdHeader);
+ } else {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGD3, AccessWidth8, 0xBF, 0x00);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/Family/Yangtze/YangtzeSdResetService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/Family/Yangtze/YangtzeSdResetService.c
new file mode 100644
index 0000000..a56100a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/Family/Yangtze/YangtzeSdResetService.c
@@ -0,0 +1,47 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze SD
+ *
+ * Init SD Controller.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SD_FAMILY_YANGTZE_YANGTZESDRESETSERVICE_FILECODE
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/Family/Yangtze/YangtzeSdService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/Family/Yangtze/YangtzeSdService.c
new file mode 100644
index 0000000..8f2d9ad
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/Family/Yangtze/YangtzeSdService.c
@@ -0,0 +1,47 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze SD
+ *
+ * Init SD Controller.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SD_FAMILY_YANGTZE_YANGTZESDSERVICE_FILECODE
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/SdEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/SdEnv.c
new file mode 100644
index 0000000..c959d5b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/SdEnv.c
@@ -0,0 +1,65 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SD controller
+ *
+ * Init SD Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_SD_SDENV_FILECODE
+
+/**
+ * FchInitEnvSd - Config SD controller before PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvSd (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ FchInitEnvSdProgram (FchDataPtr);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/SdLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/SdLate.c
new file mode 100644
index 0000000..bb14e01
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/SdLate.c
@@ -0,0 +1,60 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SD controller
+ *
+ * Init SD Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_SD_SDLATE_FILECODE
+
+/**
+ * FchInitLateSd - Prepare SD controller to boot to OS.
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateSd (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/SdMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/SdMid.c
new file mode 100644
index 0000000..b5cd869
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Sd/SdMid.c
@@ -0,0 +1,61 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch SD controller
+ *
+ * Init SD Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_SD_SDMID_FILECODE
+
+/**
+ * FchInitMidSd - Config SD controller after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidSd (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/Family/Yangtze/YangtzeLpcEnvService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/Family/Yangtze/YangtzeLpcEnvService.c
new file mode 100644
index 0000000..e2f37bb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/Family/Yangtze/YangtzeLpcEnvService.c
@@ -0,0 +1,89 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch LPC controller
+ *
+ * Init LPC Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_SPI_FAMILY_YANGTZE_YANGTZELPCENVSERVICE_FILECODE
+
+/**
+ * FchInitYangtzeEnvLpcPciTable - PCI device registers initial
+ * during early POST.
+ *
+ */
+REG8_MASK FchInitYangtzeEnvLpcPciTable[] =
+{
+ //
+ // LPC Device (Bus 0, Dev 20, Func 3)
+ //
+ {0x00, LPC_BUS_DEV_FUN, 0},
+ {FCH_LPC_REG40, (UINT8)~BIT2, BIT2},
+ {FCH_LPC_REG48, 0x00, BIT0 + BIT1 + BIT2},
+ {0x78, 0xFC, 00},
+ {FCH_LPC_REGBB, 0xF2, BIT0 + BIT2 + BIT3},
+ {0xFF, 0xFF, 0xFF},
+};
+
+/**
+ * FchInitEnvLpcProgram - Config LPC controller before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvLpcProgram (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ ProgramPciByteTable ((REG8_MASK*) (&FchInitYangtzeEnvLpcPciTable[0]), sizeof (FchInitYangtzeEnvLpcPciTable) / sizeof (REG8_MASK), StdHeader);
+
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG28, AccessWidth32, (UINT32)~(BIT21 + BIT20 + BIT19), 0);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/Family/Yangtze/YangtzeLpcResetService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/Family/Yangtze/YangtzeLpcResetService.c
new file mode 100644
index 0000000..eb0f54f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/Family/Yangtze/YangtzeLpcResetService.c
@@ -0,0 +1,790 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch LPC controller
+ *
+ * Init LPC Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87493 $ @e \$Date: 2013-02-04 11:56:12 -0600 (Mon, 04 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_FCH_SPI_FAMILY_YANGTZE_YANGTZELPCRESETSERVICE_FILECODE
+#define SPI_BASE UserOptions.FchBldCfg->CfgSpiRomBaseAddress
+
+SPI_CONTROLLER_PROFILE SpiControllerProfile[4] = {
+ {128, 100, 100, 100, 100},
+ {128, 66, 66, 66, 66},
+ {128, 33, 33, 33, 33},
+ {128, 16, 16, 16, 16},
+ };
+SPI_DEVICE_PROFILE DefaultSpiDeviceTable[] = {
+ //JEDEC_ID,RomSize,SecSize;MaxNormal;MaxFast;MaxDual;MaxQuad;QeReadReg;QeWriteReg;QeRegSize;QeLocation;
+ {0x001524C2, 2 << 20, 4096, 33, 108, 150, 300, 0x05, 0x01, 0x1, 0x0040}, //Macronix_MX25L1635D
+ {0x001525C2, 2 << 20, 4096, 33, 108, 160, 432, 0x05, 0x01, 0x1, 0x0040}, //Macronix_MX25L1635E
+ {0x00165EC2, 4 << 20, 4096, 33, 104, 208, 400, 0x05, 0x01, 0x1, 0x0040}, //Macronix_MX25L3235D
+// {0x003625C2, 4 << 20, 4096, 33, 104, 168, 432, 0x05, 0x01, 0x1, 0x0040}, //Macronix_MX25U3235F
+ {0x001720C2, 8 << 20, 4096, 33, 104, 208, 400, 0x05, 0x01, 0x1, 0x0040}, //Macronix_MX25L6436E
+ {0x003725C2, 8 << 20, 4096, 33, 104, 168, 432, 0x05, 0x01, 0x1, 0x0040}, //Macronix_MX25U6435F
+
+ {0x0046159D, 4 << 20, 4096, 33, 104, 208, 400, 0x05, 0x01, 0x1, 0x0040}, //PFLASH Pm25LQ032C
+
+ {0x001540EF, 2 << 20, 4096, 33, 104, 208, 416, 0x35, 0x01, 0x2, 0x0200}, //Wnbond_W25Q16CV
+ {0x001640EF, 4 << 20, 4096, 33, 104, 208, 320, 0x35, 0x01, 0x2, 0x0200}, //Wnbond_W25Q32BV
+ {0x001740EF, 8 << 20, 4096, 104, 104, 208, 416, 0x35, 0x01, 0x2, 0x0200}, //Wnbond_W25Q64
+
+ {0x004326BF, 8 << 20, 4096, 40, 104, 160, 416, 0x35, 0x01, 0x2, 0x0200}, //SST26VF064BA
+
+ {0x001640C8, 4 << 20, 4096, 33, 100, 160, 320, 0x35, 0x01, 0x2, 0x0200}, //GigaDecice GD25Q32BSIGR
+
+ {0x00164037, 4 << 20, 4096, 33, 100, 200, 400, 0x35, 0x01, 0x2, 0x0200}, //AMIC A25LQ32B
+
+ {0x00000000, 4 << 20, 4096, 33, 33, 33, 33, 0x05, 0x01, 0x1, 0x0040}
+};
+
+
+/**
+ * FchInitYangtzeResetLpcPciTable - Lpc (Spi) device registers
+ * initial during the power on stage.
+ *
+ *
+ *
+ *
+ */
+REG8_MASK FchInitYangtzeResetLpcPciTable[] =
+{
+ //
+ // LPC Device (Bus 0, Dev 20, Func 3)
+ //
+ {0x00, LPC_BUS_DEV_FUN, 0},
+
+ {FCH_LPC_REG48, 0x00, BIT0 + BIT1 + BIT2},
+ {FCH_LPC_REG7C, 0x00, BIT0 + BIT2},
+ {0x78, 0xF0, BIT2 + BIT3}, /// Enable LDRQ pin
+ {FCH_LPC_REGBA, 0x9F, BIT5 + BIT6},
+ // Force EC_PortActive to 1 to fix possible IR non function issue when NO_EC_SUPPORT is defined
+ {FCH_LPC_REGA4, (UINT8)~ BIT0, BIT0},
+ {0xFF, 0xFF, 0xFF},
+};
+
+/**
+ * FchInitResetLpcProgram - Config Lpc controller during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetLpcProgram (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_RESET_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+ //
+ // enable prefetch on Host, set LPC cfg 0xBB bit 0 to 1
+ //
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGBA, AccessWidth16, 0xFFFF, BIT8, StdHeader);
+
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG6C, AccessWidth32, 0xFFFFFF00, 0, StdHeader);
+
+ ProgramPciByteTable ( (REG8_MASK*) (&FchInitYangtzeResetLpcPciTable[0]), sizeof (FchInitYangtzeResetLpcPciTable) / sizeof (REG8_MASK), StdHeader);
+
+ if ( LocalCfgPtr->Spi.LpcClk0 ) {
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGD0 + 1, AccessWidth8, 0xDF, 0x20, StdHeader);
+ } else {
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGD0 + 1, AccessWidth8, 0xDF, 0, StdHeader);
+ }
+ if ( LocalCfgPtr->Spi.LpcClk1 ) {
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGD0 + 1, AccessWidth8, 0xBF, 0x40, StdHeader);
+ } else {
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGD0 + 1, AccessWidth8, 0xBF, 0, StdHeader);
+ }
+ if ( LocalCfgPtr->LegacyFree ) {
+ RwPci (((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG44), AccessWidth32, 00, 0x0003C000, StdHeader);
+ } else {
+ RwPci (((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG44), AccessWidth32, 00, 0xFF03FFD5, StdHeader);
+ }
+}
+
+/**
+ * FchWriteSpiExtReg - Write SPI Extension Register
+ *
+ *
+ *
+ * @param[in] SpiExtRegIndex - Extension Register Index.
+ * @param[in] SpiExtRegData - Extension Register Data.
+ *
+ */
+STATIC VOID
+FchWriteSpiExtReg (
+ IN UINT8 SpiExtRegIndex,
+ IN UINT8 SpiExtRegData
+ )
+{
+ ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG1E) = SpiExtRegIndex;
+ ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG1F) = SpiExtRegData;
+}
+/**
+ * FchSetSpiCounter - Set SPI RX/TX Counters
+ *
+ *
+ *
+ * @param[in] TxCounter - Transfer Counter.
+ * @param[in] RxCounter - Receive Counter.
+ *
+ */
+STATIC VOID
+FchSetSpiCounter (
+ IN UINT8 TxCounter,
+ IN UINT8 RxCounter
+ )
+{
+ FchWriteSpiExtReg (FCH_SPI_MMIO_REG1F_X05_TX_BYTE_COUNT, TxCounter);
+ FchWriteSpiExtReg (FCH_SPI_MMIO_REG1F_X06_RX_BYTE_COUNT, RxCounter);
+}
+/**
+ * FchSpiControllerNotBusy - SPI Conroller Not Busy
+ *
+ *
+ *
+ *
+ */
+STATIC VOID
+FchSpiControllerNotBusy (
+ VOID)
+{
+ UINT32 SpiReg00;
+ SpiReg00 = FCH_SPI_BUSY + FCH_SPI_EXEC_OPCODE;
+ do {
+ SpiReg00 = ACPIMMIO32 (SPI_BASE + FCH_SPI_MMIO_REG00);
+ } while ((SpiReg00 & (FCH_SPI_BUSY + FCH_SPI_EXEC_OPCODE)));
+}
+/**
+ * FchResetFifo - Reset SPI FIFO
+ *
+ *
+ *
+ *
+ */
+STATIC VOID
+FchResetFifo (
+ VOID)
+{
+ ACPIMMIO32 (SPI_BASE + FCH_SPI_MMIO_REG00) |= BIT20;
+}
+/**
+ * WaitForSpiDeviceWriteEnabled -
+ *
+ *
+ *
+ *
+ */
+STATIC BOOLEAN
+WaitForSpiDeviceWriteEnabled (
+ VOID)
+{
+ UINT8 bStatus;
+ bStatus = 0;
+ do
+ {
+ FchSpiTransfer (
+ 0, //IN UINT8 PrefixCode,
+ 0x05,//IN UINT8 Opcode,
+ &bStatus,//IN OUT UINT8 *DataPtr,
+ NULL,//IN UINT8 *AddressPtr,
+ 0,//IN UINT8 Length,
+ FALSE,//IN BOOLEAN WriteFlag,
+ FALSE,//IN BOOLEAN AddressFlag,
+ TRUE,//IN BOOLEAN DataFlag,
+ FALSE //IN BOOLEAN FinishedFlag
+ );
+ } while ((bStatus & 2) == 0);
+ return TRUE;
+}
+/**
+ * WaitForSpiDeviceComplete -
+ *
+ *
+ *
+ *
+ */
+STATIC BOOLEAN
+WaitForSpiDeviceComplete (
+ VOID)
+{
+ UINT8 bStatus;
+ bStatus = 1;
+ do
+ {
+ FchSpiTransfer (
+ 0, //IN UINT8 PrefixCode,
+ 0x05,//IN UINT8 Opcode,
+ &bStatus,//IN OUT UINT8 *DataPtr,
+ NULL,//IN UINT8 *AddressPtr,
+ 0,//IN UINT8 Length,
+ FALSE,//IN BOOLEAN WriteFlag,
+ FALSE,//IN BOOLEAN AddressFlag,
+ TRUE,//IN BOOLEAN DataFlag,
+ FALSE //IN BOOLEAN FinishedFlag
+ );
+ } while (bStatus & 1);
+ return TRUE;
+}
+/**
+ * FchSpiTransfer - FCH Spi Transfer
+ *
+ *
+ *
+ * @param[in] PrefixCode - Prefix code.
+ * @param[in] Opcode - Opcode.
+ * @param[in] DataPtr - Data Pointer.
+ * @param[in] AddressPtr - Address Pointer.
+ * @param[in] Length - Read/Write Length.
+ * @param[in] WriteFlag - Write Flag.
+ * @param[in] AddressFlag - Address Flag.
+ * @param[in] DataFlag - Data Flag.
+ * @param[in] FinishedFlag - Finished Flag.
+ *
+ */
+//static
+AGESA_STATUS
+FchSpiTransfer (
+ IN UINT8 PrefixCode,
+ IN UINT8 Opcode,
+ IN OUT UINT8 *DataPtr,
+ IN UINT8 *AddressPtr,
+ IN UINT8 Length,
+ IN BOOLEAN WriteFlag,
+ IN BOOLEAN AddressFlag,
+ IN BOOLEAN DataFlag,
+ IN BOOLEAN FinishedFlag
+ )
+{
+ UINTN Addr;
+ UINTN Retry;
+ UINTN i;
+ UINTN index;
+ UINT8 WriteCount;
+ UINT8 ReadCount;
+ //UINT8 Dummy;
+ //UINT8 CurrFifoIndex;
+
+ if (!((Opcode == 0x9f) && (!DataFlag))) {
+ if (PrefixCode) {
+ Retry = 0;
+ do {
+ ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG00 + 0) = PrefixCode;
+ //ACPIMMIO8(SPI_BASE + FCH_SPI_MMIO_REG00 + 1) = 0;
+ FchSetSpiCounter (0, 0);
+ ACPIMMIO32 (SPI_BASE + FCH_SPI_MMIO_REG00) |= FCH_SPI_EXEC_OPCODE;
+ FchSpiControllerNotBusy ();
+
+ if (FinishedFlag) {
+ if (WaitForSpiDeviceWriteEnabled ()) {
+ Retry = 0;
+ } else {
+ Retry ++;
+ if (Retry >= FCH_SPI_RETRY_TIMES) {
+ return AGESA_ERROR;
+ }
+ }
+ }
+ } while (Retry);
+ }
+ Retry = 0;
+ do {
+ WriteCount = 0;
+ ReadCount = 0;
+ //
+ // Reset Fifo Ptr
+ //
+ FchResetFifo ();
+ //
+ // Check Address Mode
+ //
+ index = 0;
+ Addr = (UINTN) AddressPtr;
+ if (AddressFlag) {
+ //for (i = 16, Addr = (UINTN) AddressPtr; i >= 0; i -= 8) {
+ for (i = 0; i < 3; i ++) {
+ //ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG0C + 0) = (UINT8) ((Addr >> i) & 0xff);
+ ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG80_FIFO + index) = (UINT8) ((Addr >> (16 - i * 8)) & 0xff);
+ index ++;
+ }
+ WriteCount += 3;
+ }
+ if (DataFlag) {
+ //
+ // Check Read/Write Mode
+ //
+ if (WriteFlag) {
+ WriteCount += Length + 1;
+ for (i = 0; i < (UINTN) (Length + 1); i ++) {
+ //ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG0C + 0) = DataPtr[i];
+ ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG80_FIFO + index) = DataPtr[i];
+ index ++;
+ }
+ } else {
+ //
+ // Read operation must plus extra 1 byte
+ //
+ ReadCount += Length + 2;
+ }
+ }
+ ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG00 + 0) = Opcode;
+ //ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG00 + 1) = (ReadCount << 4) + WriteCount;
+ FchSetSpiCounter (WriteCount, ReadCount);
+ ACPIMMIO32 (SPI_BASE + FCH_SPI_MMIO_REG00) |= FCH_SPI_EXEC_OPCODE;
+ FchSpiControllerNotBusy ();
+
+ if (FinishedFlag) {
+ if (WaitForSpiDeviceComplete ()) {
+ Retry = 0;
+ } else {
+ Retry ++;
+ if (Retry >= FCH_SPI_RETRY_TIMES) {
+ return AGESA_ERROR;
+ }
+ }
+ }
+ } while (Retry);
+ if (DataFlag && ReadCount) {
+ //
+ // Reset Fifo Ptr
+ //
+ FchResetFifo ();
+ //while (DataFlag && ReadCount) {
+ // CurrFifoIndex = ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG4E + 1) & 0x07;
+ // if (CurrFifoIndex != WriteCount) {
+ // Dummy = ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG0C + 0);
+ // } else break;
+ //}
+ for (i = 0; i < (UINTN) (Length + 1); i ++) {
+ //DataPtr[i] = ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG0C + 0);
+ DataPtr[i] = ACPIMMIO8 (SPI_BASE + FCH_SPI_MMIO_REG80_FIFO + WriteCount + i);
+ }
+ }
+ }
+ return AGESA_SUCCESS;
+}
+
+/**
+ *
+ *
+ *
+ * @param[in] SpiQualMode- Spi Qual Mode.
+ * @param[in] StdHeader - Standard Header.
+ *
+ */
+STATIC VOID
+FchSetQualMode (
+ IN UINT32 SpiQualMode,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ RwMem (ACPI_MMIO_BASE + GPIO_BASE + 0x69, AccessWidth8, (UINT32)~BIT3, BIT3);
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGBB, AccessWidth8, (UINT32)~ BIT0, BIT0, StdHeader);
+ RwMem (SPI_BASE + FCH_SPI_MMIO_REG00, AccessWidth32, (UINT32)~( BIT18 + BIT29 + BIT30), ((SpiQualMode & 1) << 18) + ((SpiQualMode & 6) << 28));
+
+}
+
+/**
+ * FchInitResetSpi - Config Spi controller during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetSpi (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 SpiModeByte;
+ FCH_RESET_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ //
+ // Set Spi ROM Base Address
+ //
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGA0, AccessWidth32, 0x001F, SPI_BASE, StdHeader);
+
+ RwMem (SPI_BASE + FCH_SPI_MMIO_REG00, AccessWidth32, 0xFFFFFFFF, (BIT19 + BIT24 + BIT25 + BIT26));
+ RwMem (SPI_BASE + FCH_SPI_MMIO_REG0C, AccessWidth32, 0xFFC0FFFF, 0 );
+
+ RwMem (SPI_BASE + FCH_SPI_MMIO_REG20, AccessWidth8, 0xFE, (UINT8) ((LocalCfgPtr->SPI100_Enable) << 0));
+
+ if (LocalCfgPtr->SpiSpeed) {
+ RwMem (SPI_BASE + FCH_SPI_MMIO_REG22, AccessWidth32, ~((UINT32) (0xF << 12)), ((LocalCfgPtr->SpiSpeed - 1 ) << 12));
+ }
+
+ if (LocalCfgPtr->FastSpeed) {
+ RwMem (SPI_BASE + FCH_SPI_MMIO_REG22, AccessWidth32, ~((UINT32) (0xF << 8)), ((LocalCfgPtr->FastSpeed - 1 ) << 8));
+ }
+
+ RwMem (SPI_BASE + FCH_SPI_MMIO_REG1C, AccessWidth32, (UINT32)~(BIT10), ((LocalCfgPtr->BurstWrite) << 10));
+
+ SpiModeByte = LocalCfgPtr->Mode;
+ if (LocalCfgPtr->Mode) {
+ if ((SpiModeByte == FCH_SPI_MODE_QUAL_114) || (SpiModeByte == FCH_SPI_MODE_QUAL_144)) {
+ if (FchPlatformSpiQe (FchDataPtr)) {
+ FchSetQualMode (SpiModeByte, StdHeader);
+ }
+ } else {
+ RwMem (SPI_BASE + FCH_SPI_MMIO_REG00, AccessWidth32, (UINT32)~( BIT18 + BIT29 + BIT30), ((LocalCfgPtr->Mode & 1) << 18) + ((LocalCfgPtr->Mode & 6) << 28));
+ }
+ } else {
+ if (FchPlatformSpiQe (FchDataPtr)) {
+ SpiModeByte = FCH_SPI_MODE_QUAL_144;
+ }
+ }
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGBA, AccessWidth16, 0xFFFF, BIT8, StdHeader);
+
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGBA, AccessWidth16, 0xFFFF, BIT7, StdHeader);
+}
+
+
+
+STATIC UINT32
+FchReadSpiId (
+ IN BOOLEAN Flag
+ )
+{
+ UINT32 DeviceID;
+ UINT8 *DeviceIdPtr;
+ DeviceID = 0;
+ DeviceIdPtr = (UINT8 *) (((UINTN) (&DeviceID)));
+ if (Flag) {
+ FchSpiTransfer (
+ 0, //IN UINT8 PrefixCode,
+ 0x9F,//IN UINT8 Opcode,
+ DeviceIdPtr,//IN OUT UINT8 *DataPtr,
+ (UINT8 *) (NULL),//IN UINT8 *AddressPtr,
+ 2,//IN UINT8 Length,
+ FALSE,//IN BOOLEAN WriteFlag,
+ FALSE,//IN BOOLEAN AddressFlag,
+ TRUE,//IN BOOLEAN DataFlag,
+ FALSE //IN BOOLEAN FinishedFlag
+ );
+ } else {
+ FchSpiTransfer (
+ 0, //IN UINT8 PrefixCode,
+ 0x9F,//IN UINT8 Opcode,
+ DeviceIdPtr,//IN OUT UINT8 *DataPtr,
+ (UINT8 *) (NULL),//IN UINT8 *AddressPtr,
+ 2,//IN UINT8 Length,
+ FALSE,//IN BOOLEAN WriteFlag,
+ FALSE,//IN BOOLEAN AddressFlag,
+ FALSE,//IN BOOLEAN DataFlag,
+ FALSE //IN BOOLEAN FinishedFlag
+ );
+ }
+ return DeviceID;
+}
+/**
+ * FchReadSpiQe - Read SPI Qual Enable
+ *
+ *
+ *
+ * @param[in] SpiDeviceProfilePtr - Spi Device Profile Pointer
+ * @param[in] SpiQeRegValue - Spi QuadEnable Register Value
+ *
+ */
+STATIC BOOLEAN
+FchReadSpiQe (
+ IN OUT SPI_DEVICE_PROFILE *SpiDeviceProfilePtr,
+ IN UINT16 SpiQeRegValue
+ )
+{
+ UINT16 Value16;
+ SpiQeRegValue = 0;
+ Value16 = 0;
+
+ FchSpiTransfer (
+ 0, //IN UINT8 PrefixCode,
+ SpiDeviceProfilePtr->QeReadRegister,//IN UINT8 Opcode,
+ (UINT8 *)(&SpiQeRegValue),//IN OUT UINT8 *DataPtr,
+ NULL,//IN UINT8 *AddressPtr,
+ 0,//IN UINT8 Length,
+ FALSE,//IN BOOLEAN WriteFlag,
+ FALSE,//IN BOOLEAN AddressFlag,
+ TRUE,//IN BOOLEAN DataFlag,
+ FALSE //IN BOOLEAN FinishedFlag
+ );
+ if (SpiDeviceProfilePtr->QeOperateSize == 2) {
+ FchSpiTransfer (
+ 0, //IN UINT8 PrefixCode,
+ 0x05,//IN UINT8 Opcode,
+ (UINT8 *)(&SpiQeRegValue),//IN OUT UINT8 *DataPtr,
+ NULL,//IN UINT8 *AddressPtr,
+ 0,//IN UINT8 Length,
+ FALSE,//IN BOOLEAN WriteFlag,
+ FALSE,//IN BOOLEAN AddressFlag,
+ TRUE,//IN BOOLEAN DataFlag,
+ FALSE //IN BOOLEAN FinishedFlag
+ );
+ FchSpiTransfer (
+ 0, //IN UINT8 PrefixCode,
+ SpiDeviceProfilePtr->QeReadRegister,//IN UINT8 Opcode,
+ (UINT8 *)(&Value16),//IN OUT UINT8 *DataPtr,
+ NULL,//IN UINT8 *AddressPtr,
+ 0,//IN UINT8 Length,
+ FALSE,//IN BOOLEAN WriteFlag,
+ FALSE,//IN BOOLEAN AddressFlag,
+ TRUE,//IN BOOLEAN DataFlag,
+ FALSE //IN BOOLEAN FinishedFlag
+ );
+ SpiQeRegValue |= (Value16 << 8);
+ }
+
+ if (SpiDeviceProfilePtr->QeLocation & SpiQeRegValue) {
+ return TRUE;
+ }
+ SpiQeRegValue |= SpiDeviceProfilePtr->QeLocation;
+ return FALSE;
+}
+/**
+ * FchWriteSpiQe - Write SPI Qual Enable
+ *
+ *
+ *
+ * @param[in] SpiDeviceProfilePtr - Spi Device Profile Pointer
+ * @param[in] SpiQeRegValue - Spi QuadEnable Register Value
+ *
+ */
+STATIC VOID
+FchWriteSpiQe (
+ IN OUT SPI_DEVICE_PROFILE *SpiDeviceProfilePtr,
+ IN UINT16 SpiQeRegValue
+ )
+{
+
+ SpiQeRegValue |= SpiDeviceProfilePtr->QeLocation;
+ FchSpiTransfer (
+ 0x06, //IN UINT8 PrefixCode,
+ SpiDeviceProfilePtr->QeWriteRegister,//IN UINT8 Opcode,
+ (UINT8 *)(&SpiQeRegValue),//IN OUT UINT8 *DataPtr,
+ NULL,//IN UINT8 *AddressPtr,
+ SpiDeviceProfilePtr->QeOperateSize - 1,//IN UINT8 Length,
+ TRUE,//IN BOOLEAN WriteFlag,
+ FALSE,//IN BOOLEAN AddressFlag,
+ TRUE,//IN BOOLEAN DataFlag,
+ TRUE //IN BOOLEAN FinishedFlag
+ );
+}
+
+/**
+ * FchFindSpiDeviceProfile - Find SPI Device Profile
+ *
+ *
+ *
+ * @param[in] DeviceID - Device ID
+ * @param[in] SpiDeviceProfilePtr - Spi Device Profile Pointer
+ *
+ */
+STATIC BOOLEAN
+FchFindSpiDeviceProfile (
+ IN UINT32 DeviceID,
+ IN OUT SPI_DEVICE_PROFILE *SpiDeviceProfilePtr
+ )
+{
+ SPI_DEVICE_PROFILE *CurrentSpiDeviceProfilePtr;
+ UINT16 SpiQeRegValue;
+ SpiQeRegValue = 0;
+ CurrentSpiDeviceProfilePtr = SpiDeviceProfilePtr;
+ do {
+ if (CurrentSpiDeviceProfilePtr->JEDEC_ID == DeviceID) {
+ SpiDeviceProfilePtr = CurrentSpiDeviceProfilePtr;
+ if (!(FchReadSpiQe (SpiDeviceProfilePtr, SpiQeRegValue))) {
+ FchWriteSpiQe (SpiDeviceProfilePtr, SpiQeRegValue);
+ if (!(FchReadSpiQe (SpiDeviceProfilePtr, SpiQeRegValue))) {
+ return FALSE;
+ }
+ }
+ return TRUE;
+ }
+ CurrentSpiDeviceProfilePtr++;
+ } while (CurrentSpiDeviceProfilePtr->JEDEC_ID != 0);
+ return FALSE;
+}
+
+/**
+ * FchConfigureSpiDeviceDummyCycle - Configure Spi Device Dummy
+ * Cycle
+ *
+ *
+ *
+ * @param[in] DeviceID - Device ID
+ * @param[in] FchDataPtr - FchData Pointer.
+ *
+ */
+STATIC BOOLEAN
+FchConfigureSpiDeviceDummyCycle (
+ IN UINT32 DeviceID,
+ IN OUT FCH_RESET_DATA_BLOCK *FchDataPtr
+ )
+{
+ UINT16 Mode16;
+ UINT16 Value16;
+ UINT16 DummyValue16;
+ UINT16 CurrentDummyValue16;
+ UINT16 CurrentMode16;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ StdHeader = FchDataPtr->StdHeader;
+ Value16 = 0;
+ DummyValue16 = 8;
+
+ switch (DeviceID) {
+ case 0x17BA20:
+
+ FchSpiTransfer (
+ 0, //IN UINT8 PrefixCode,
+ 0xB5,//IN UINT8 Opcode,
+ (UINT8 *)(&Value16),//IN OUT UINT8 *DataPtr,
+ NULL,//IN UINT8 *AddressPtr,
+ 1,//IN UINT8 Length,
+ FALSE,//IN BOOLEAN WriteFlag,
+ FALSE,//IN BOOLEAN AddressFlag,
+ TRUE,//IN BOOLEAN DataFlag,
+ FALSE //IN BOOLEAN FinishedFlag
+ );
+ CurrentDummyValue16 = Value16 >> 12;
+ CurrentMode16 = (Value16 >> 9) & 7;
+
+ switch (FchDataPtr->Mode) {
+ case FCH_SPI_MODE_QUAL_144:
+ DummyValue16 = 6;
+ Mode16 = FCH_SPI_DEVICE_MODE_144;
+ break;
+ case FCH_SPI_MODE_QUAL_114:
+ DummyValue16 = 8;
+ Mode16 = FCH_SPI_DEVICE_MODE_114;
+ Mode16 = 7;
+ break;
+ case FCH_SPI_MODE_QUAL_122:
+ DummyValue16 = 4;
+ Mode16 = FCH_SPI_DEVICE_MODE_122;
+ break;
+ case FCH_SPI_MODE_QUAL_112:
+ DummyValue16 = 8;
+ Mode16 = FCH_SPI_DEVICE_MODE_112;
+ break;
+ case FCH_SPI_MODE_FAST:
+ DummyValue16 = 8;
+ Mode16 = FCH_SPI_DEVICE_MODE_FAST;
+ break;
+ default:
+ DummyValue16 = 15;
+ Mode16 = 7;
+ break;
+ }
+ if ((CurrentDummyValue16 != DummyValue16) || (CurrentMode16 != Mode16)) {
+ //FCH_DEADLOOP();
+ Value16 &= ~ (0x7f << 9);
+ Value16 |= (DummyValue16 << 12);
+ Value16 |= (Mode16 << 9);
+ FchSpiTransfer (
+ 0x06, //IN UINT8 PrefixCode,
+ 0xB1,//IN UINT8 Opcode,
+ (UINT8 *)(&Value16),//IN OUT UINT8 *DataPtr,
+ NULL,//IN UINT8 *AddressPtr,
+ 1,//IN UINT8 Length,
+ TRUE,//IN BOOLEAN WriteFlag,
+ FALSE,//IN BOOLEAN AddressFlag,
+ TRUE,//IN BOOLEAN DataFlag,
+ TRUE //IN BOOLEAN FinishedFlag
+ );
+ FchStall (1000, StdHeader);
+ WriteIo8 ((UINT16) (0xCF9), 0x0E);
+ }
+ return TRUE;
+ default:
+ return FALSE;
+ }
+}
+/**
+ * FchPlatformSpiQe - Platform SPI Qual Enable
+ *
+ *
+ *
+ * @param[in] FchDataPtr - FchData Pointer.
+ *
+ */
+BOOLEAN
+FchPlatformSpiQe (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 DeviceID;
+ SPI_DEVICE_PROFILE *LocalSpiDeviceProfilePtr;
+ FCH_RESET_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+ LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr;
+ if (LocalCfgPtr->QeEnabled) {
+ return TRUE;
+ }
+ StdHeader = LocalCfgPtr->StdHeader;
+ FchReadSpiId (FALSE);
+ DeviceID = FchReadSpiId (TRUE);
+// if (LocalCfgPtr->OemSpiDeviceTable != NULL) {
+// LocalSpiDeviceProfilePtr = LocalCfgPtr->OemSpiDeviceTable;
+// if (FchFindSpiDeviceProfile (DeviceID, LocalSpiDeviceProfilePtr)) {
+// return TRUE;
+// }
+// }
+ LocalSpiDeviceProfilePtr = (SPI_DEVICE_PROFILE *) (&DefaultSpiDeviceTable);
+ if (FchConfigureSpiDeviceDummyCycle (DeviceID, LocalCfgPtr)) {
+ return TRUE;
+ }
+ if (FchFindSpiDeviceProfile (DeviceID, LocalSpiDeviceProfilePtr)) {
+ return TRUE;
+ }
+ return FALSE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/LpcEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/LpcEnv.c
new file mode 100644
index 0000000..4ddbe59
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/LpcEnv.c
@@ -0,0 +1,94 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch LPC controller
+ *
+ * Init LPC Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_SPI_LPCENV_FILECODE
+
+
+/**
+ * FchInitEnvLpc - Config LPC controller before PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvLpc (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ //
+ // LPC CFG programming
+ //
+ //
+ // Turn on and configure LPC clock (48MHz)
+ //
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG28, AccessWidth32, (UINT32)~(BIT21 + BIT20 + BIT19), 2 << 19);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40, AccessWidth8, (UINT32)~BIT7, 0);
+
+ //
+ // Initialization of pci config space
+ //
+ FchInitEnvLpcProgram (FchDataPtr);
+
+ //
+ // SSID for LPC Controller
+ //
+ if (LocalCfgPtr->Spi.LpcSsid != 0 ) {
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG2C, AccessWidth32, 0x00, LocalCfgPtr->Spi.LpcSsid, StdHeader);
+ }
+ //
+ // LPC MSI
+ //
+ if ( LocalCfgPtr->Spi.LpcMsiEnable ) {
+ RwPci ((LPC_BUS_DEV_FUN << 16) + 0x78, AccessWidth32, (UINT32)~BIT1, BIT1, StdHeader);
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/LpcLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/LpcLate.c
new file mode 100644
index 0000000..44ac896
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/LpcLate.c
@@ -0,0 +1,58 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch LPC controller
+ *
+ * Init LPC Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_SPI_LPCLATE_FILECODE
+
+/**
+ * FchInitLateLpc - Prepare Ir controller to boot to OS.
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateLpc (
+ IN VOID *FchDataPtr
+ )
+{
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/LpcMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/LpcMid.c
new file mode 100644
index 0000000..cc1fbbb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/LpcMid.c
@@ -0,0 +1,60 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch LPC controller
+ *
+ * Init LPC Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_SPI_LPCMID_FILECODE
+
+/**
+ * FchInitMidLpc - Config Lpc controller after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidLpc (
+ IN VOID *FchDataPtr
+ )
+{
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/LpcReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/LpcReset.c
new file mode 100644
index 0000000..8cbd8eb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/LpcReset.c
@@ -0,0 +1,70 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch LPC controller
+ *
+ * Init LPC Controller features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_SPI_LPCRESET_FILECODE
+
+
+/**
+ * FchInitResetLpc - Config Lpc controller during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetLpc (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_RESET_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ FchInitResetLpcProgram (FchDataPtr);
+
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/SpiEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/SpiEnv.c
new file mode 100644
index 0000000..ad7cdfb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/SpiEnv.c
@@ -0,0 +1,61 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Spi (Lpc) controller
+ *
+ * Init Spi (Lpc) Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_SPI_SPIENV_FILECODE
+
+/**
+ * FchInitEnvSpi - Config Spi controller before PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvSpi (
+ IN VOID *FchDataPtr
+ )
+{
+ FchInitEnvLpc (FchDataPtr);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/SpiLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/SpiLate.c
new file mode 100644
index 0000000..f143452
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/SpiLate.c
@@ -0,0 +1,113 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Spi (Lpc) controller
+ *
+ * Init Spi (Lpc) Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_SPI_SPILATE_FILECODE
+
+/**
+ * FchInitLateSpi - Prepare Spi controller to boot to OS.
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateSpi (
+ IN VOID *FchDataPtr
+ )
+{
+ FchInitLateLpc (FchDataPtr);
+}
+
+/**
+ * FchSpiUnlock - Fch SPI Unlock
+ *
+ *
+ * @param[in] FchDataPtr
+ *
+ */
+VOID
+FchSpiUnlock (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 SpiRomBase;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+ SpiRomBase = LocalCfgPtr->Spi.RomBaseAddress;
+
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG50, AccessWidth32, (UINT32)~(BIT0 + BIT1), 0, StdHeader);
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG54, AccessWidth32, (UINT32)~(BIT0 + BIT1), 0, StdHeader);
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG58, AccessWidth32, (UINT32)~(BIT0 + BIT1), 0, StdHeader);
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG5C, AccessWidth32, (UINT32)~(BIT0 + BIT1), 0, StdHeader);
+ RwMem (SpiRomBase + FCH_SPI_MMIO_REG00, AccessWidth32, (UINT32)~(BIT22 + BIT23), (BIT22 + BIT23));
+}
+
+/**
+ * FchSpiLock - Fch SPI lock
+ *
+ *
+ * @param[in] FchDataPtr
+ *
+ */
+VOID
+FchSpiLock (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 SpiRomBase;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+ SpiRomBase = LocalCfgPtr->Spi.RomBaseAddress;
+
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG50, AccessWidth32, (UINT32)~(BIT0 + BIT1), (BIT0 + BIT1), StdHeader);
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG54, AccessWidth32, (UINT32)~(BIT0 + BIT1), (BIT0 + BIT1), StdHeader);
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG58, AccessWidth32, (UINT32)~(BIT0 + BIT1), (BIT0 + BIT1), StdHeader);
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG5C, AccessWidth32, (UINT32)~(BIT0 + BIT1), (BIT0 + BIT1), StdHeader);
+ RwMem (SpiRomBase + FCH_SPI_MMIO_REG00, AccessWidth32, (UINT32)~(BIT22 + BIT23), 0);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/SpiMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/SpiMid.c
new file mode 100644
index 0000000..4f8b883
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/SpiMid.c
@@ -0,0 +1,61 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Spi (Lpc) controller
+ *
+ * Init Spi (Lpc) Controller features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_SPI_SPIMID_FILECODE
+
+/**
+ * FchInitMidSpi - Config Spi controller after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidSpi (
+ IN VOID *FchDataPtr
+ )
+{
+ FchInitMidLpc (FchDataPtr);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/SpiReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/SpiReset.c
new file mode 100644
index 0000000..dad50a8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Spi/SpiReset.c
@@ -0,0 +1,45 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Spi controller
+ *
+ * Init Spi Controller features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#define FILECODE PROC_FCH_SPI_SPIRESET_FILECODE
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/EhciEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/EhciEnv.c
new file mode 100644
index 0000000..d78370b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/EhciEnv.c
@@ -0,0 +1,60 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch USB EHCI controller
+ *
+ * Init USB EHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_EHCIENV_FILECODE
+
+/**
+ * FchInitEnvUsbEhci - Config USB EHCI controller before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvUsbEhci (
+ IN VOID *FchDataPtr
+ )
+{
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/EhciLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/EhciLate.c
new file mode 100644
index 0000000..88f672f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/EhciLate.c
@@ -0,0 +1,60 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch USB EHCI controller
+ *
+ * Init USB EHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_EHCILATE_FILECODE
+
+/**
+ * FchInitLateUsbEhci - Config USB EHCI controller before OS
+ * boot
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateUsbEhci (
+ IN VOID *FchDataPtr
+ )
+{
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/EhciMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/EhciMid.c
new file mode 100644
index 0000000..dca9dc4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/EhciMid.c
@@ -0,0 +1,158 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch USB EHCI controller
+ *
+ * Init USB EHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_EHCIMID_FILECODE
+
+//
+// Declaration of local functions
+//
+/**
+ * EhciInitAfterPciInit - Config USB controller after PCI emulation
+ *
+ * @param[in] Value Controller PCI config address (bus# + device# + function#)
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ */
+VOID EhciInitAfterPciInit (IN UINT32 Value, IN FCH_DATA_BLOCK* FchDataPtr);
+
+/**
+ * FchInitMidUsbEhci - Config USB EHCI controller after PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidUsbEhci (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+
+ FchInitMidUsbEhci1 (LocalCfgPtr);
+ FchInitMidUsbEhci2 (LocalCfgPtr);
+ FchInitMidUsbEhci3 (LocalCfgPtr);
+}
+
+/**
+ * FchInitMidUsbEhci1 - Config USB1 EHCI controller after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidUsbEhci1 (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ UINT32 DeviceId;
+
+ DeviceId = (USB1_EHCI_BUS_DEV_FUN << 16);
+ EhciInitAfterPciInit (DeviceId, FchDataPtr);
+
+}
+
+/**
+ * FchInitMidUsbEhci2 - Config USB2 EHCI controller after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidUsbEhci2 (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ UINT32 DeviceId;
+
+ DeviceId = (USB2_EHCI_BUS_DEV_FUN << 16);
+ EhciInitAfterPciInit (DeviceId, FchDataPtr);
+
+}
+
+/**
+ * FchInitMidUsbEhci3 - Config USB3 EHCI controller after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+
+VOID
+FchInitMidUsbEhci3 (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ UINT32 DeviceId;
+
+ DeviceId = (USB3_EHCI_BUS_DEV_FUN << 16);
+ EhciInitAfterPciInit (DeviceId, FchDataPtr);
+
+}
+
+/**
+ * EhciInitAfterPciInit - Config EHCI controller after PCI
+ * emulation
+ *
+ *
+ * @param[in] Value EHCI Controler info.
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+EhciInitAfterPciInit (
+ IN UINT32 Value,
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ FchEhciInitAfterPciInit ( Value, FchDataPtr);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/EhciReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/EhciReset.c
new file mode 100644
index 0000000..d716606
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/EhciReset.c
@@ -0,0 +1,62 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Ehci controller
+ *
+ * Init Ehci Controller features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_EHCIRESET_FILECODE
+
+/**
+ * FchInitResetEhci - Config Ehci controller during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetEhci (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeEhciEnvService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeEhciEnvService.c
new file mode 100644
index 0000000..e3f8ca8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeEhciEnvService.c
@@ -0,0 +1,44 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze FCH USB EHCI controller
+ *
+ * Init USB EHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEEHCIENVSERVICE_FILECODE
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeEhciLateService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeEhciLateService.c
new file mode 100644
index 0000000..785064f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeEhciLateService.c
@@ -0,0 +1,47 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze FCH USB EHCI controller
+ *
+ * Init USB EHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEEHCILATESERVICE_FILECODE
+//
+// Declaration of local functions
+//
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeEhciMidService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeEhciMidService.c
new file mode 100644
index 0000000..977ee0e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeEhciMidService.c
@@ -0,0 +1,188 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze FCH USB EHCI controller
+ *
+ * Init USB EHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87830 $ @e \$Date: 2013-02-11 12:48:20 -0600 (Mon, 11 Feb 2013) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEEHCIMIDSERVICE_FILECODE
+//
+// Declaration of local functions
+//
+
+/**
+ * FchEhciInitAfterPciInit - Config USB controller after PCI emulation
+ *
+ * @param[in] Value Controller PCI config address (bus# + device# + function#)
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ */
+VOID
+FchEhciInitAfterPciInit (
+ IN UINT32 Value,
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ UINT8 Index;
+ UINT32 BarAddress;
+ UINT32 Var;
+ UINT8 UsbS3WakeResumeOnlyDisable;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+ UINT32 PortNum;
+ UINT32 DrivingStrength;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+ //
+ //Get BAR address
+ //
+ ReadPci ((UINT32) Value + FCH_EHCI_REG10, AccessWidth32, &BarAddress, StdHeader);
+ if ( (BarAddress != - 1) && (BarAddress != 0) ) {
+ //
+ //Enable Memory access
+ //
+ RwPci ((UINT32) Value + FCH_EHCI_REG04, AccessWidth8, 0, BIT1, StdHeader);
+ if (FchDataPtr->Usb.EhciSsid != 0 ) {
+ RwPci ((UINT32) Value + FCH_EHCI_REG2C, AccessWidth32, 0x00, FchDataPtr->Usb.EhciSsid, StdHeader);
+ }
+ RwMem (BarAddress + FCH_EHCI_BAR_REGA4, AccessWidth32, 0xFF00FF00, 0x00400040);
+ RwMem (BarAddress + FCH_EHCI_BAR_REGBC, AccessWidth32, (UINT32)~( BIT12 + BIT14), BIT12 + BIT14);
+ RwMem (BarAddress + 0x0B0, AccessWidth32, (UINT32)~BIT5, BIT5);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth16, (UINT32)~BIT12, BIT12);
+ for (PortNum = 0; PortNum < 5; PortNum ++) {
+ if (Value == (USB1_EHCI_BUS_DEV_FUN << 16)) {
+ DrivingStrength = (UINT32) (LocalCfgPtr->Usb.Ehci1Phy[PortNum]);
+ } else if (Value == (USB2_EHCI_BUS_DEV_FUN << 16)) {
+ DrivingStrength = (UINT32) (LocalCfgPtr->Usb.Ehci2Phy[PortNum]);
+ } else if ((Value == (USB3_EHCI_BUS_DEV_FUN << 16)) && (PortNum < 4)) {
+ DrivingStrength = (UINT32) (LocalCfgPtr->Usb.Ehci3Phy[PortNum]);
+ } else {
+ break;
+ }
+ RwMem (BarAddress + FCH_EHCI_BAR_REGB4, AccessWidth32, 0xFFFE0000, (PortNum << 13) + DrivingStrength);
+ RwMem (BarAddress + FCH_EHCI_BAR_REGB4, AccessWidth32, (UINT32)~BIT12, BIT12);
+ DrivingStrength = 0x302;
+ RwMem (BarAddress + FCH_EHCI_BAR_REGB4, AccessWidth32, 0xFFFFC000, (PortNum << 13) + BIT12 + DrivingStrength);
+ Index = 0;
+ do {
+ ReadMem ( BarAddress + FCH_EHCI_BAR_REGB4, AccessWidth32, &Var);
+ Index++;
+ FchStall (10, StdHeader);
+ } while (( Var & BIT17) && (Index < 10 ));
+ Index = 0;
+ RwMem (BarAddress + FCH_EHCI_BAR_REGB4, AccessWidth32, 0xFFFFC000, (PortNum << 13) + DrivingStrength);
+ do {
+ ReadMem ( BarAddress + FCH_EHCI_BAR_REGB4, AccessWidth32, &Var);
+ Index++;
+ FchStall (10, StdHeader);
+ } while (( Var & BIT17) && (Index < 10 ));
+ RwMem (BarAddress + FCH_EHCI_BAR_REGB4, AccessWidth32, 0xFFFFC000, (PortNum << 13) + BIT12 + DrivingStrength);
+ }
+ // Step3
+ RwMem (BarAddress + FCH_EHCI_BAR_REGD0, AccessWidth32, ~((UINT32) (0x0F)), (UINT32) (0x6));
+ RwMem (BarAddress + FCH_EHCI_BAR_REGC4, AccessWidth32, (UINT32) (~ 0xff00ffff), 0x90001221);
+ RwMem (BarAddress + FCH_EHCI_BAR_REGD4, AccessWidth32, ~((UINT32) (0xC2)), (UINT32) (0x40));
+ FchStall (200, StdHeader);
+ RwMem (BarAddress + FCH_EHCI_BAR_REGD4, AccessWidth32, ~((UINT32) (0x02)), (UINT32) (0x02));
+ FchStall (400, StdHeader);
+ RwMem (BarAddress + FCH_EHCI_BAR_REGD4, AccessWidth32, ~((UINT32) (0x02)), (UINT32) (0x0));
+ RwMem (BarAddress + FCH_EHCI_BAR_REGC0, AccessWidth32, (UINT32) (~ 0x00010000), BIT16);
+
+ RwPci ((UINT32) Value + 0x50, AccessWidth32, ~ ((UINT32) (0x01 << 6)), (UINT32) (0x01 << 6), StdHeader);
+ RwPci ((UINT32) Value + 0x50, AccessWidth32, ~ ((UINT32) (0x0F << 8)), (UINT32) (0x01 << 8), StdHeader);
+ RwPci ((UINT32) Value + 0x50, AccessWidth32, ~ ((UINT32) (0x0F << 12)), (UINT32) (0x01 << 12), StdHeader);
+ RwPci ((UINT32) Value + 0x50, AccessWidth32, ~ ((UINT32) (0x01 << 17)), (UINT32) (0x01 << 17), StdHeader);
+ RwPci ((UINT32) Value + 0x50, AccessWidth32, ~ ((UINT32) (0x01 << 21)), (UINT32) (0x01 << 21), StdHeader);
+
+ RwPci ((UINT32) Value + 0x50, AccessWidth32, ~ ((UINT32) (0x01 << 29)), (UINT32) (0x01 << 29), StdHeader);
+ RwPci ((UINT32) Value + 0x50 + 2, AccessWidth16, (UINT16)0xFFFF, BIT16 + BIT10, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54, AccessWidth16, 0xCC04, 0x0000027b, StdHeader);
+ RwAlink ((FCH_ABCFG_REG90 | (UINT32) (ABCFG << 29)), 0xFFFEFFFF, BIT16, StdHeader);
+ if ( FchDataPtr->Usb.UsbMsiEnable) {
+ RwPci ((UINT32) Value + 0x50, AccessWidth32, (UINT32)~BIT6, 0x00, StdHeader);
+ }
+ RwPci ((UINT32) Value + FCH_EHCI_REG54, AccessWidth32, (UINT32)~BIT4, BIT4, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54, AccessWidth32, (UINT32)~BIT11, BIT11, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54, AccessWidth16, (UINT16)0x5FFF, BIT15, StdHeader);
+ RwPci ((UINT32) Value + 0x50 + 2, AccessWidth16, (UINT32)~BIT3, BIT3, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT16)0xFFFC, BIT0 + BIT1, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT16)0xFFFB, BIT2, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT16)0xFFF7, BIT3, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT32)~BIT5, BIT5, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT32)~BIT8, BIT8, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT32)~BIT4, BIT4, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT32)~BIT6, BIT6, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT32)~BIT9, BIT9, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT32)~BIT11, BIT11, StdHeader);
+ RwPci ((UINT32) Value + 0x50, AccessWidth16, (UINT32)~BIT0, BIT0, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT32)~BIT12, BIT12, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT32)~BIT13, BIT13, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54, AccessWidth16, (UINT32)~BIT12, BIT12, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT32)~BIT14, BIT14, StdHeader);
+ for ( PortNum = 0; PortNum < 5; PortNum++ ) {
+ RwMem (BarAddress + FCH_EHCI_BAR_REGB4, AccessWidth32, 0xFFFE0000, (UINT32) ((PortNum << 13) + BIT12 + (0x7 << 7)));
+ if (PortNum < 4) {
+ ReadMem (BarAddress + FCH_EHCI_BAR_REGA8, AccessWidth32, &Var);
+ Var = (Var >> (PortNum * 8)) & 0x000000FF;
+ } else {
+ ReadMem (BarAddress + FCH_EHCI_BAR_REGAC, AccessWidth32, &Var);
+ Var = Var & 0x000000FF;
+ }
+ Var &= 0xF8;
+ Var |= BIT0 + BIT2;
+ RwMem (BarAddress + FCH_EHCI_BAR_REGB4, AccessWidth32, 0xFFFE0000, (UINT32) ((PortNum << 13) + BIT12 + (0x7 << 7) + Var));
+ RwMem (BarAddress + FCH_EHCI_BAR_REGB4, AccessWidth32, ~((UINT32) (1 << 12)), 0);
+ RwMem (BarAddress + FCH_EHCI_BAR_REGB4, AccessWidth32, ~((UINT32) (1 << 12)), (UINT32) (0x1 << 12));
+ }
+ } else {
+ BarAddress = FCH_FAKE_USB_BAR_ADDRESS;
+ WritePci ((UINT32) Value + FCH_EHCI_REG10, AccessWidth32, &BarAddress, StdHeader);
+ RwPci ((UINT32) Value + FCH_EHCI_REG04, AccessWidth8, 0, BIT1, StdHeader);
+ RwMem (BarAddress + FCH_EHCI_BAR_REGBC, AccessWidth32, (UINT32)~( BIT12 + BIT14), BIT12 + BIT14);
+ RwPci ((UINT32) Value + FCH_EHCI_REG04, AccessWidth8, 0, 0, StdHeader);
+ }
+
+ ReadPmio (FCH_PMIOA_REGF0, AccessWidth8, &UsbS3WakeResumeOnlyDisable, StdHeader);
+ if ( (UsbS3WakeResumeOnlyDisable &= BIT6) == BIT6 ) {
+ RwPmio (FCH_PMIOA_REGF4, AccessWidth8, (UINT32)~BIT2, 0, StdHeader);
+ } else {
+ RwPmio (FCH_PMIOA_REGF4, AccessWidth8, (UINT32)~BIT2, BIT2, StdHeader);
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeOhciEnvService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeOhciEnvService.c
new file mode 100644
index 0000000..096e279
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeOhciEnvService.c
@@ -0,0 +1,96 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze FCH USB OHCI controller
+ *
+ * Init USB OHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEOHCIENVSERVICE_FILECODE
+//
+// Declaration of local functions
+//
+/**
+ * FchSetUsbEnableReg
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchSetUsbEnableReg (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ UINT8 UsbModeReg;
+ UINT8 XhciReg00;
+ UsbModeReg = 0;
+
+ // Overwrite EHCI3/OHCI3 by Xhci1Enable
+ ReadMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth8, &XhciReg00);
+ if (XhciReg00 & BIT0) {
+ FchDataPtr->Usb.Ohci3Enable = FALSE;
+ FchDataPtr->Usb.Ehci3Enable = FALSE;
+ UsbModeReg |= 0x80;
+ } else {
+ UsbModeReg &= 0x7F;
+ }
+
+ if ( FchDataPtr->Usb.Ohci1Enable ) {
+ UsbModeReg |= 0x01;
+ }
+ if ( FchDataPtr->Usb.Ehci1Enable ) {
+ UsbModeReg |= 0x02;
+ }
+ if ( FchDataPtr->Usb.Ohci2Enable ) {
+ UsbModeReg |= 0x04;
+ }
+ if ( FchDataPtr->Usb.Ehci2Enable ) {
+ UsbModeReg |= 0x08;
+ }
+ if ( FchDataPtr->Usb.Ohci3Enable ) {
+ UsbModeReg |= 0x10;
+ }
+ if ( FchDataPtr->Usb.Ehci3Enable ) {
+ UsbModeReg |= 0x20;
+ }
+
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEF, AccessWidth8, 0, UsbModeReg);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeOhciLateService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeOhciLateService.c
new file mode 100644
index 0000000..15a1997
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeOhciLateService.c
@@ -0,0 +1,48 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze FCH USB OHCI controller
+ *
+ * Init USB OHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEOHCILATESERVICE_FILECODE
+//
+// Declaration of local functions
+//
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeOhciMidService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeOhciMidService.c
new file mode 100644
index 0000000..54a076f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeOhciMidService.c
@@ -0,0 +1,107 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze FCH USB OHCI controller
+ *
+ * Init USB OHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEOHCIMIDSERVICE_FILECODE
+//
+// Declaration of local functions
+//
+
+/**
+ * FchOhciInitAfterPciInit - Config USB OHCI controller after
+ * PCI emulation
+ *
+ * @param[in] Value Controller PCI config address (bus# + device# + function#)
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ */
+VOID
+FchOhciInitAfterPciInit (
+ IN UINT32 Value,
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ //
+ // Disable the MSI capability of USB host controllers
+ // ??
+ RwPci ((UINT32) Value + FCH_OHCI_REG40 + 1, AccessWidth8, 0xFF, BIT0, FchDataPtr->StdHeader);
+ RwPci ((UINT32) Value + 0x50, AccessWidth8, (UINT32)~(BIT0 + BIT5 + BIT12), BIT0, FchDataPtr->StdHeader);
+ //
+ // USB SMI Handshake
+ //
+ RwPci ((UINT32) Value + 0x50 + 1, AccessWidth8, (UINT32)~BIT4, 0x00, FchDataPtr->StdHeader);
+
+ if (Value != (USB4_OHCI_BUS_DEV_FUN << 16)) {
+ if ( FchDataPtr->Usb.OhciSsid != 0 ) {
+ RwPci ((UINT32) Value + FCH_OHCI_REG2C, AccessWidth32, 0x00, FchDataPtr->Usb.OhciSsid, FchDataPtr->StdHeader);
+ }
+ }
+ //
+ // recommended setting to, enable fix to cover the corner case S3 wake up issue from some USB 1.1 devices
+ //OHCI 0_PCI_Config 0x50[30] = 1
+ //
+ RwPci ((UINT32) Value + 0x50 + 3, AccessWidth8, (UINT32)~BIT6, BIT6, FchDataPtr->StdHeader);
+ //
+ // L1 Early Exit
+ // Set OHCI Arbiter Mode.
+ // Set Enable Global Clock Gating.
+ // RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth16, (UINT32)~BIT12, BIT12) For RPR* "prevent OHCI/EHCI could enable/disable separately."
+ //
+ RwPci ((UINT32) Value + 0x50, AccessWidth8, (UINT32)~BIT0, 0x00, FchDataPtr->StdHeader);
+ RwPci ((UINT32) Value + FCH_OHCI_REG80, AccessWidth8, (UINT32)~(BIT0 + BIT4 + BIT5 + BIT6 + BIT7), BIT0 + BIT4 + BIT7, FchDataPtr->StdHeader);
+ RwPci ((UINT32) Value + FCH_OHCI_REG80, AccessWidth16, (UINT32)~(BIT4 + BIT5 + BIT8), BIT4 + BIT5 + BIT8, FchDataPtr->StdHeader);
+
+ //
+ // Enable OHCI SOF Synchronization.
+ // Enable OHCI Periodic List Advance.
+ //
+ RwPci ((UINT32) Value + 0x50 + 2, AccessWidth8, (UINT32)~(BIT3 + BIT4 + BIT6 + BIT7), BIT3 + BIT4 + BIT6 + BIT7, FchDataPtr->StdHeader);
+ if ( FchDataPtr->Usb.UsbMsiEnable) {
+ RwPci ((UINT32) Value + FCH_OHCI_REG40 + 1, AccessWidth8, (UINT32)~BIT0, 0x00, FchDataPtr->StdHeader);
+ RwPci ((UINT32) Value + 0x50, AccessWidth8, (UINT32)~BIT5, BIT5, FchDataPtr->StdHeader);
+ }
+ // USB1.1 full-speed false crc errors detected. Issue - fix enable
+ RwPci ((UINT32) Value + FCH_OHCI_REG80, AccessWidth32, (UINT32) (~(0x01 << 9)), (UINT32) (0x01 << 9), FchDataPtr->StdHeader);
+ RwPci ((UINT32) Value + FCH_OHCI_REG80, AccessWidth32, (UINT32) (~(0x01 << 10)), (UINT32) (0x01 << 10), FchDataPtr->StdHeader);
+ RwPci ((UINT32) Value + FCH_OHCI_REG80, AccessWidth32, (UINT32) (~(0x01 << 11)), (UINT32) (0x01 << 11), FchDataPtr->StdHeader);
+ RwPci ((UINT32) Value + FCH_OHCI_REG80, AccessWidth32, (UINT32) (~(0x01 << 12)), (UINT32) (0x01 << 12), FchDataPtr->StdHeader);
+ RwPci ((UINT32) Value + FCH_OHCI_REG80, AccessWidth32, (UINT32) (~(0x03 << 14)), (UINT32) (0x03 << 14), FchDataPtr->StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeXhciEnvService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeXhciEnvService.c
new file mode 100644
index 0000000..67fcaf6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeXhciEnvService.c
@@ -0,0 +1,482 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze FCH USB3 controller
+ *
+ * Init USB3 features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 87830 $ @e \$Date: 2013-02-11 12:48:20 -0600 (Mon, 11 Feb 2013) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEXHCIENVSERVICE_FILECODE
+
+//
+// Declaration of local functions
+//
+
+
+/**
+ * FchXhciUsbPhyCalibrated - Config XHCI Phy
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchXhciUsbPhyCalibrated (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ UINT8 Index;
+ UINT32 DrivingStrength;
+ UINT32 Port;
+ UINT32 Register;
+ UINT32 RegValue;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *)FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG8C, AccessWidth32, 0xFFF0FFFF, 0x00030000);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG8C, AccessWidth32, 0xFEFFFFFF, 0x01000000);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG8C, AccessWidth32, 0x3FFFFFFF, 0x80000000);
+
+
+ DrivingStrength = 0x302;
+ for (Port = 0; Port < 2; Port ++) {
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + BIT12 + DrivingStrength, StdHeader);
+ Register = FCH_XHCI_IND60_REG00;
+ Index = 0;
+ do {
+ WritePci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x48, AccessWidth32, &Register, StdHeader);
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x4C, AccessWidth32, &RegValue, StdHeader);
+ Index++;
+ FchStall (10, StdHeader);
+ } while ((RegValue & BIT17) && (Index < 10 ));
+ Index = 0;
+ do {
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + DrivingStrength, StdHeader);
+ WritePci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x48, AccessWidth32, &Register, StdHeader);
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x4C, AccessWidth32, &RegValue, StdHeader);
+ Index++;
+ FchStall (10, StdHeader);
+ } while ((RegValue & BIT17) && (Index < 10 ));
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + BIT12 + DrivingStrength, StdHeader);
+ }
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG50, ~ ((UINT32) (0x0f)), ((UINT32) (0x06)), StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG0C, ~ ((UINT32) (0x0f << 4)), ((UINT32) (0x02 << 4)), StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG0C, ~ ((UINT32) (0x0f << 8)), ((UINT32) (0x02 << 8)), StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG0C, ~ ((UINT32) (0x0f << 12)), ((UINT32) (0x01 << 12)), StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG0C, ~ ((UINT32) (0x0f)), ((UINT32) (0x01)), StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG0C, ~ ((UINT32) (0xff << 24)), ((UINT32) (0x90 << 24)), StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG54, ~ ((UINT32) (0x03 << 6)), ((UINT32) (0x01 << 6)), StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG54, ~ ((UINT32) (0x01 << 1)), ((UINT32) (0x00 << 1)), StdHeader);
+ FchStall (200, StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG54, ~ ((UINT32) (0x01 << 1)), ((UINT32) (0x01 << 1)), StdHeader);
+ FchStall (400, StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG54, ~ ((UINT32) (0x01 << 1)), ((UINT32) (0x00 << 1)), StdHeader);
+}
+
+/**
+ * FchXhciInitIndirectReg - Config XHCI Indirect Registers
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchXhciInitIndirectReg (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ UINT8 Index;
+ UINT32 DrivingStrength;
+ UINT32 Port;
+ UINT32 Register;
+ UINT32 RegValue;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *)FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+ DrivingStrength = 0;
+
+ RwXhci0IndReg ( FCH_XHCI_IND_REG94, 0xFFFFFC00, 0x00000021, StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND_REGD4, 0xFFFFFC00, 0x00000021, StdHeader);
+
+ RwXhci0IndReg ( FCH_XHCI_IND_REG00, 0xF8FFFFFF, 0x07000000, StdHeader);
+ for (Port = 0; Port < 2; Port ++) {
+ DrivingStrength = (UINT32) (LocalCfgPtr->Usb.Xhci20Phy[Port]);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + BIT12 + DrivingStrength, StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + DrivingStrength, StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + BIT12 + DrivingStrength, StdHeader);
+ }
+
+
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG50, ~ ((UINT32) (0x0f)), ((UINT32) (0x07)), StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG0C, ~ ((UINT32) (0x0f << 4)), ((UINT32) (0x02 << 4)), StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG0C, ~ ((UINT32) (0x0f << 8)), ((UINT32) (0x02 << 8)), StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG08, 0x80FC00FF, 0, StdHeader); // For BTS
+
+ for (Port = 0; Port < 2; Port ++) {
+ DrivingStrength = 0x1E4;
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFE0000, (Port << 13) + BIT12 + DrivingStrength, StdHeader);
+ Register = FCH_XHCI_IND60_REG00;
+ Index = 0;
+ do {
+ WritePci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x48, AccessWidth32, &Register, StdHeader);
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x4C, AccessWidth32, &RegValue, StdHeader);
+ Index++;
+ FchStall (10, StdHeader);
+ } while ((RegValue & BIT17) && (Index < 10 ));
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFE0000, (Port << 13) + DrivingStrength, StdHeader);
+ Register = FCH_XHCI_IND60_REG00;
+ Index = 0;
+ do {
+ WritePci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x48, AccessWidth32, &Register, StdHeader);
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x4C, AccessWidth32, &RegValue, StdHeader);
+ Index++;
+ FchStall (10, StdHeader);
+ } while ((RegValue & BIT17) && (Index < 10 ));
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFE0000, (Port << 13) + BIT12 + DrivingStrength, StdHeader);
+ }
+ for (Port = 0; Port < 2; Port ++) {
+ DrivingStrength = 0x1C4;
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + BIT12 + DrivingStrength, StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + DrivingStrength, StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + BIT12 + DrivingStrength, StdHeader);
+ }
+
+ for (Port = 0; Port < 4; Port ++) {
+ if (Port < 2) {
+ ReadXhci0Phy (Port, (0x7 << 7), &DrivingStrength, StdHeader);
+ DrivingStrength &= 0x0000000F8;
+ DrivingStrength |= BIT0 + BIT2;
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + BIT12 + (0x7 << 7) + DrivingStrength, StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + (0x7 << 7) + DrivingStrength, StdHeader);
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG00, 0xFFFFC000, (Port << 13) + BIT12 + (0x7 << 7) + DrivingStrength, StdHeader);
+ }
+ }
+ RwXhci0IndReg ( FCH_XHCI_IND60_REG48, 0xFFFFFFE0, BIT0, StdHeader);
+}
+
+/**
+ * FchCombineSigRomInfo - Combine SIG ROM information
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+STATIC UINT32
+FchCombineSigRomInfo (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ UINTN RomSigStartingAddr;
+ UINT32 RomStore[NUM_OF_ROMSIG_FILED];
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+ UINT32 SelNum;
+ UINT32 RomSignatureTag;
+ UINT16 XhciFwTag;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *)FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+ for ( SelNum = 0; SelNum < NUM_OF_ROMSIG_FILED; SelNum++) {
+ RomStore [SelNum] = 0;
+ }
+ GetRomSigPtr (&RomSigStartingAddr, StdHeader);
+ RomSignatureTag = ACPIMMIO32 (RomSigStartingAddr);
+ if ( RomSignatureTag == ROMSIG_SIG ) {
+ for ( SelNum = 0; SelNum < NUM_OF_ROMSIG_FILED; SelNum++) {
+ RomStore[SelNum] = ACPIMMIO32 (RomSigStartingAddr + (SelNum << 2));
+ }
+ } else {
+ RomStore[XHCI_FILED_NUM] = 0;
+ }
+ if ( LocalCfgPtr->Usb.UserDefineXhciRomAddr != 0 ) {
+ RomStore[XHCI_FILED_NUM] = LocalCfgPtr->Usb.UserDefineXhciRomAddr;
+ }
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGC8 + 3, AccessWidth8, 0x7F, BIT7, StdHeader);
+ for ( SelNum = 1; SelNum < NUM_OF_ROMSIG_FILED; SelNum++) {
+ if (RomStore[SelNum] != 0) {
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGCC, AccessWidth32, (UINT32)~ (BIT2 + BIT1 + BIT0), (BIT2 + SelNum), StdHeader);
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGCC, AccessWidth32, ROMSIG_CFG_MASK, RomStore[SelNum], StdHeader);
+ }
+ }
+ XhciFwTag = (UINT16) ACPIMMIO32 ((RomStore[XHCI_FILED_NUM]) + XHCI_BOOT_RAM_OFFSET);
+ if ( XhciFwTag != INSTRUCTION_RAM_SIG ) {
+ RomStore[XHCI_FILED_NUM] = 0;
+ }
+ return RomStore[XHCI_FILED_NUM];
+}
+
+/**
+ * FchXhciInitBeforePciInit - Config XHCI controller before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchXhciInitBeforePciInit (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ UINT16 BcdAddress;
+ UINT16 BcdSize;
+ UINT16 AcdAddress;
+ UINT16 AcdSize;
+ UINT16 FwAddress;
+ UINT16 FwSize;
+ UINT32 XhciFwStarting;
+ UINT32 SpiValidBase;
+ UINT32 RegData;
+ UINT16 Index;
+ BOOLEAN Xhci0Enable;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *)FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+ Xhci0Enable = LocalCfgPtr->Usb.Xhci0Enable;
+
+ if ( Xhci0Enable == 0 ) {
+ return;
+ }
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, 0x00080000, 0x00400700);
+ FchStall (20, StdHeader);
+
+ RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGC8 + 3, AccessWidth8, 0x7F, BIT7, StdHeader);
+ XhciFwStarting = FchCombineSigRomInfo (FchDataPtr);
+ if ( XhciFwStarting == 0 ) {
+ return;
+ }
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, 0xFFFFF9FF, 0x00000600);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90, AccessWidth32, 0xCFF00000, 0x000AAAAA);
+
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG50 + 1, AccessWidth8, (UINT32)~BIT1, BIT1);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEF, AccessWidth8, (UINT32)~(BIT4 + BIT5), 0);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEF, AccessWidth8, (UINT32)~(BIT7), BIT7); /// Enable 2.0 devices
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, 0xF0FFFFFC, 0x01);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, 0xEFFFFFFF, 0x10000000);
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA0, AccessWidth32, 0x00000000, (SPI_HEAD_LENGTH << 16));
+
+ BcdAddress = ACPIMMIO16 (XhciFwStarting + BCD_ADDR_OFFSET + XHC_BOOT_RAM_SIZE);
+ BcdSize = ACPIMMIO16 (XhciFwStarting + BCD_SIZE_OFFSET + XHC_BOOT_RAM_SIZE);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA4, AccessWidth16, 0x0000, BcdAddress);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA4 + 2, AccessWidth16, 0x0000, BcdSize);
+
+ AcdAddress = ACPIMMIO16 (XhciFwStarting + ACD_ADDR_OFFSET + XHC_BOOT_RAM_SIZE);
+ AcdSize = ACPIMMIO16 (XhciFwStarting + ACD_SIZE_OFFSET + XHC_BOOT_RAM_SIZE);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA8, AccessWidth16, 0x0000, AcdAddress);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA8 + 2, AccessWidth16, 0x0000, AcdSize);
+
+ SpiValidBase = SPI_BASE2 (XhciFwStarting + 4 + XHC_BOOT_RAM_SIZE) | SPI_BAR0_VLD | SPI_BASE0 | SPI_BAR1_VLD | SPI_BASE1 | SPI_BAR2_VLD;
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB0, AccessWidth32, 0x00000000, SpiValidBase);
+ for (Index = 0; Index < SPI_HEAD_LENGTH; Index++) {
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + Index, AccessWidth8, 0, ACPIMMIO8 (XhciFwStarting + XHC_BOOT_RAM_SIZE + Index));
+ }
+
+ for (Index = 0; Index < BcdSize; Index++) {
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + SPI_HEAD_LENGTH + Index, AccessWidth8, 0, ACPIMMIO8 (XhciFwStarting + BcdAddress + Index));
+ }
+
+ for (Index = 0; Index < AcdSize; Index++) {
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + SPI_HEAD_LENGTH + BcdSize + Index, AccessWidth8, 0, ACPIMMIO8 (XhciFwStarting + AcdAddress + Index));
+ }
+
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, (UINT32)~BIT0, BIT0);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, (UINT32)~BIT29, 0);
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG04 + 2, AccessWidth16, 0x7FFF, BIT15);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG04, AccessWidth16, 0x0000, 0);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG08 + 2, AccessWidth16, 0x0000, 0x8000);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG08, AccessWidth16, 0x0000, 0);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, (UINT32)~BIT29, BIT29);
+
+ for (;;) {
+ ReadMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00 , AccessWidth32, &RegData);
+ if (RegData & BIT30) {
+ break;
+ }
+ }
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, (UINT32)~BIT29, 0);
+
+ FwAddress = ACPIMMIO16 (XhciFwStarting + FW_ADDR_OFFSET + XHC_BOOT_RAM_SIZE);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccessWidth16, 0x0000, ACPIMMIO16 (XhciFwStarting + FwAddress));
+ FwAddress += 2;
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG04, AccessWidth16, 0x0000, FwAddress + XHC_BOOT_RAM_SIZE);
+
+ FwSize = ACPIMMIO16 (XhciFwStarting + FW_SIZE_OFFSET + XHC_BOOT_RAM_SIZE);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG08, AccessWidth16, 0x0000, 0);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG08 + 2, AccessWidth16, 0x0000, FwSize);
+ //
+ // Step 3.5 to enable the instruction RAM preload functionality.
+ //
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG04 + 2, AccessWidth16, 0x7FFF, 0);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, (UINT32)~BIT29, BIT29);
+
+ for (;;) {
+ ReadMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00 , AccessWidth32, &RegData);
+ if (RegData & BIT30) {
+ break;
+ }
+ }
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, (UINT32)~BIT29, 0);
+
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, (UINT32)~U3PLL_RESET, 0); ///Release U3PLLreset
+ for (;;) {
+ ReadMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00 , AccessWidth32, &RegData);
+ if (RegData & U3PLL_LOCK) {
+ break;
+ }
+ }
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, (UINT32)~U3PHY_RESET, 0); ///Release U3PHY
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, (UINT32)~U3CORE_RESET, 0); ///Release core reset
+
+ FchXhciUsbPhyCalibrated (LocalCfgPtr);
+
+ FchXhciInitIndirectReg (LocalCfgPtr);
+
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEF, AccessWidth8, (UINT32)~(BIT4 + BIT5), 0); /// Disable Device 22
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEF, AccessWidth8, (UINT32)~(BIT7), BIT7); /// Enable 2.0 devices
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, (UINT32)~(BIT21), BIT21);
+ //
+ // Step 5.
+ //
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + 0x00, AccessWidth32, (UINT32)~(BIT17 + BIT18 + BIT19), BIT17 + BIT18 + BIT19);
+
+ //
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~((UINT32) (0x3 << 11)), (UINT32) (0x3 << 11));
+ //
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~((UINT32) (0x1 << 16)), (UINT32) (0x1 << 16));
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~((UINT32) (0x1 << 15)), (UINT32) (0x1 << 15));
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~((UINT32) (0x7 << 18)), (UINT32) (0x7 << 18));
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth32, ~((UINT32) (0x1 << 13)), (UINT32) (0x1 << 13));
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth32, ~((UINT32) (0x1 << 14)), (UINT32) (0x1 << 14));
+
+ RwXhci0IndReg ( FCH_XHCI_IND_REG54, (UINT32)~(BIT15), BIT15, StdHeader);
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, (UINT32)~(BIT25 + BIT24), BIT24);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, (UINT32)~(BIT22), BIT22);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccessWidth32, (UINT32)~(BIT20), BIT20);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT15), BIT15);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT1), BIT1);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT2), BIT2);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT3), BIT3);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT6), BIT6);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT7), BIT7);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT8), BIT8);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT9), BIT9);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT10), BIT10);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT11), BIT11);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT12), BIT12);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT13), BIT13);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT14), BIT14);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT16), BIT16);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG40, AccessWidth32, (UINT32)~(BIT0), BIT0);
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + 0x20, AccessWidth32, (UINT32)~(BIT13 + BIT14 + BIT21), BIT13 + BIT14 + BIT21);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccessWidth32, (UINT32)~(BIT20), BIT20);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF2, AccessWidth8, (UINT32)~(BIT3), BIT3);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccessWidth32, (UINT32)~(BIT22), BIT22);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT17), BIT17);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT18), BIT18);
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccessWidth32, (UINT32)~(BIT24), BIT24);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccessWidth32, (UINT32)~(BIT25), BIT25);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG24, AccessWidth32, (UINT32)~(BIT8), BIT8);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG24, AccessWidth32, (UINT32)~(BIT9), BIT9);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG24, AccessWidth32, (UINT32)~(BIT10), BIT10);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG24, AccessWidth32, (UINT32)~(BIT12), BIT12);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT20 + BIT21 + BIT22), (BIT20 + BIT21 + BIT22));
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT23), BIT23);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT27), BIT27);
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~BIT29, BIT29);
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + 0x98, AccessWidth32, (UINT32)~(BIT30), BIT30);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + 0x98, AccessWidth32, (UINT32)~(BIT31), BIT31);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccessWidth32, (UINT32)~(BIT27), BIT27);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccessWidth32, (UINT32)~(BIT28), BIT28);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG48, AccessWidth32, 0x00000000, FCH_XHCI_IND_REG100);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG4C, AccessWidth32, (UINT32)~(BIT0 + BIT1 + BIT2), BIT0 + BIT1 + BIT2);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG48, AccessWidth32, 0x00000000, FCH_XHCI_IND_REG120);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG4C, AccessWidth32, (UINT32)~(BIT3), BIT3);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG48, AccessWidth32, 0x00000000, FCH_XHCI_IND_REG100);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG4C, AccessWidth32, (UINT32)~(BIT21), BIT21);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG48, AccessWidth32, 0x00000000, FCH_XHCI_IND_REG128);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG4C, AccessWidth32, (UINT32)~(BIT0), BIT0);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG48, AccessWidth32, 0x00000000, FCH_XHCI_IND_REG100);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG4C, AccessWidth32, (UINT32)~(BIT3 + BIT4), BIT3 + BIT4);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG48, AccessWidth32, 0x00000000, FCH_XHCI_IND_REG100);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG4C, AccessWidth32, (UINT32)~(BIT5), BIT5);
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG48, AccessWidth32, 0x00000000, FCH_XHCI_IND_REG48);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG4C, AccessWidth32, (UINT32)~(BIT1), BIT1);
+
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG48, AccessWidth32, 0x00000000, FCH_XHCI_IND_REG48);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG4C, AccessWidth32, (UINT32)~(BIT14), BIT14);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG24, AccessWidth32, (UINT32)~(BIT17), BIT17);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG24, AccessWidth32, (UINT32)~(BIT15 + BIT14), BIT14);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG24, AccessWidth32, (UINT32)~(BIT11), BIT11);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG24, AccessWidth32, (UINT32)~(BIT16), BIT16);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + 0x28, AccessWidth32, (UINT32)~(BIT0), BIT0);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG24, AccessWidth32, (UINT32)~(BIT20 + BIT21 + BIT22), (BIT20 + BIT21 + BIT22));
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG24, AccessWidth32, (UINT32)~(BIT24 + BIT25 + BIT26), (BIT24 + BIT25 + BIT26));
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG30, AccessWidth32, (UINT32)~(BIT0 + BIT4 + BIT24), (BIT0 + BIT24));
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG48, AccessWidth32, 0x00000000, FCH_XHCI_IND_REG100);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG4C, AccessWidth32, (UINT32)~ BIT5, BIT5);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG48, AccessWidth32, 0x00000000, FCH_XHCI_IND_REG48);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG4C, AccessWidth32, (UINT32)~(BIT16), BIT16);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG10, AccessWidth32, 0xFFFF00FF, 0x2A00);
+ RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG50 + 1, AccessWidth8, (UINT32)~BIT1, 0);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG48, AccessWidth32, 0x00000000, 0x80);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG4C, AccessWidth32, 0xFFFFFFF8, 0x06);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG48, AccessWidth32, 0x00000000, 0xC0);
+ RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG4C, AccessWidth32, 0xFFFFFFF8, 0x06);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeXhciLateService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeXhciLateService.c
new file mode 100644
index 0000000..8c1cbaf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeXhciLateService.c
@@ -0,0 +1,130 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze FCH USB3 controller
+ *
+ * Init USB3 features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEXHCILATESERVICE_FILECODE
+
+//
+// Declaration of local functions
+//
+
+/**
+ * FchInitLateUsbXhciProgram - Config USB3 controller before OS
+ * Boot
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateUsbXhciProgram (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 IndexValue;
+ UINT8 Value;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *)FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ if ( LocalCfgPtr->Usb.Xhci1Enable == TRUE ) {
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x10, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI_REGISTER_BAR00;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x11, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI_REGISTER_BAR01;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x12, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI_REGISTER_BAR02;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x13, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI_REGISTER_BAR03;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x04, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI_REGISTER_04H;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x0C, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI_REGISTER_0CH;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x3C, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI_REGISTER_3CH;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x10, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI1_REGISTER_BAR00;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x11, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI1_REGISTER_BAR01;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x12, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI1_REGISTER_BAR02;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x13, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI1_REGISTER_BAR03;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x04, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI1_REGISTER_04H;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x0C, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI1_REGISTER_0CH;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+
+ ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x3C, AccessWidth8, &Value, StdHeader);
+ IndexValue = XHCI1_REGISTER_3CH;
+ WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader);
+ }
+ RwXhci0IndReg ( FCH_XHCI_IND_REG04, (UINT32)~ BIT8, BIT8, StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeXhciMidService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeXhciMidService.c
new file mode 100644
index 0000000..7b784d0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeXhciMidService.c
@@ -0,0 +1,48 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Yangtze FCH USB3 controller
+ *
+ * Init USB3 features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEXHCIMIDSERVICE_FILECODE
+
+//
+// Declaration of local functions
+//
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeXhciResetService.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeXhciResetService.c
new file mode 100644
index 0000000..5652974
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/Family/Yangtze/YangtzeXhciResetService.c
@@ -0,0 +1,118 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Xhci controller
+ *
+ * Init Xhci Controller features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_FAMILY_YANGTZE_YANGTZEXHCIRESETSERVICE_FILECODE
+
+/**
+ * FchInitResetXhciProgram - Config Xhci controller during
+ * Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetXhciProgram (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT8 IndexValue;
+ UINT32 ValueDword;
+ UINT8 ValueByte;
+ FCH_RESET_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x00, AccessWidth32, &ValueDword, StdHeader);
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x00, AccessWidth32, &ValueDword, StdHeader);
+ if ( ValueDword == (FCH_USB_XHCI_DID << 16) + FCH_USB_XHCI_VID) {
+ //
+ // First Xhci controller.
+ //
+ ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x00, AccessWidth32, &ValueDword, StdHeader);
+ ValueDword = 0;
+
+ IndexValue = XHCI_REGISTER_BAR00;
+ ReadBiosram (IndexValue, AccessWidth32, &ValueDword, StdHeader);
+ WritePci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x10, AccessWidth32, &ValueDword, StdHeader);
+
+ IndexValue = XHCI_REGISTER_04H;
+ ReadBiosram (IndexValue, AccessWidth8, &ValueByte, StdHeader);
+ WritePci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x04, AccessWidth8, &ValueByte, StdHeader);
+
+ IndexValue = XHCI_REGISTER_0CH;
+ ReadBiosram (IndexValue, AccessWidth8, &ValueByte, StdHeader);
+ WritePci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x0C, AccessWidth8, &ValueByte, StdHeader);
+
+ IndexValue = XHCI_REGISTER_3CH;
+ ReadBiosram (IndexValue, AccessWidth8, &ValueByte, StdHeader);
+ WritePci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x3C, AccessWidth8, &ValueByte, StdHeader);
+ //
+ // Second Xhci controller.
+ //
+ ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x00, AccessWidth32, &ValueDword, StdHeader);
+ ValueDword = 0;
+
+ IndexValue = XHCI1_REGISTER_BAR00;
+ ReadBiosram (IndexValue, AccessWidth32, &ValueDword, StdHeader);
+ WritePci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x10, AccessWidth32, &ValueDword, StdHeader);
+
+ IndexValue = XHCI1_REGISTER_04H;
+ ReadBiosram (IndexValue, AccessWidth8, &ValueByte, StdHeader);
+ WritePci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x04, AccessWidth8, &ValueByte, StdHeader);
+
+ IndexValue = XHCI1_REGISTER_0CH;
+ ReadBiosram (IndexValue, AccessWidth8, &ValueByte, StdHeader);
+ WritePci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x0C, AccessWidth8, &ValueByte, StdHeader);
+
+ IndexValue = XHCI1_REGISTER_3CH;
+ ReadBiosram (IndexValue, AccessWidth8, &ValueByte, StdHeader);
+ WritePci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x3C, AccessWidth8, &ValueByte, StdHeader);
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/OhciEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/OhciEnv.c
new file mode 100644
index 0000000..ca05234
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/OhciEnv.c
@@ -0,0 +1,60 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch USB OHCI controller
+ *
+ * Init USB OHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_OHCIENV_FILECODE
+
+/**
+ * FchInitEnvUsbOhci - Config USB OHCI controller before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvUsbOhci (
+ IN VOID *FchDataPtr
+ )
+{
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/OhciLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/OhciLate.c
new file mode 100644
index 0000000..d0837d3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/OhciLate.c
@@ -0,0 +1,60 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch USB OHCI controller
+ *
+ * Init USB OHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_OHCILATE_FILECODE
+
+/**
+ * FchInitLateUsbOhci - Config USB OHCI controller before OS
+ * Boot
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateUsbOhci (
+ IN VOID *FchDataPtr
+ )
+{
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/OhciMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/OhciMid.c
new file mode 100644
index 0000000..c5f5434
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/OhciMid.c
@@ -0,0 +1,213 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch USB OHCI controller
+ *
+ * Init USB OHCI features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_OHCIMID_FILECODE
+//
+// Declaration of local functions
+//
+
+/**
+ * OhciInitAfterPciInit - Config USB OHCI controller after PCI emulation
+ *
+ * @param[in] Value Controller PCI config address (bus# + device# + function#)
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ */
+VOID OhciInitAfterPciInit (IN UINT32 Value, IN FCH_DATA_BLOCK* FchDataPtr);
+
+/**
+ * FchInitMidUsbOhci - Config USB OHCI controller after PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidUsbOhci (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_INTERFACE *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_INTERFACE *)FchDataPtr;
+
+ FchInitMidUsbOhci1 (LocalCfgPtr);
+ FchInitMidUsbOhci2 (LocalCfgPtr);
+ FchInitMidUsbOhci3 (LocalCfgPtr);
+ FchInitMidUsbOhci4 (LocalCfgPtr);
+}
+
+/**
+ * FchInitMidUsbOhci1 - Config USB1 OHCI controller after PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidUsbOhci1 (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 DeviceId;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ DeviceId = (USB1_OHCI_BUS_DEV_FUN << 16);
+ OhciInitAfterPciInit (DeviceId, LocalCfgPtr);
+
+ if (LocalCfgPtr->Usb.OhciSsid != 0 ) {
+ RwPci ((USB1_OHCI_BUS_DEV_FUN << 16) + FCH_OHCI_REG2C, AccessWidth32, 0x00, LocalCfgPtr->Usb.OhciSsid, StdHeader);
+ }
+}
+
+/**
+ * FchInitMidUsbOhci2 - Config USB2 OHCI controller after PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidUsbOhci2 (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 DeviceId;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ DeviceId = (USB2_OHCI_BUS_DEV_FUN << 16);
+ OhciInitAfterPciInit (DeviceId, LocalCfgPtr);
+
+ if (LocalCfgPtr->Usb.OhciSsid != 0 ) {
+ RwPci ((USB2_OHCI_BUS_DEV_FUN << 16) + FCH_OHCI_REG2C, AccessWidth32, 0x00, LocalCfgPtr->Usb.OhciSsid, StdHeader);
+ }
+}
+
+/**
+ * FchInitMidUsbOhci3 - Config USB3 OHCI controller after PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidUsbOhci3 (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 DeviceId;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ DeviceId = (USB3_OHCI_BUS_DEV_FUN << 16);
+ OhciInitAfterPciInit (DeviceId, LocalCfgPtr);
+
+ if (LocalCfgPtr->Usb.OhciSsid != 0 ) {
+ RwPci ((USB3_OHCI_BUS_DEV_FUN << 16) + FCH_OHCI_REG2C, AccessWidth32, 0x00, LocalCfgPtr->Usb.OhciSsid, StdHeader);
+ }
+}
+
+/**
+ * FchInitMidUsbOhci4 - Config USB4 OHCI controller after PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidUsbOhci4 (
+ IN VOID *FchDataPtr
+ )
+{
+ UINT32 DeviceId;
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ DeviceId = (USB4_OHCI_BUS_DEV_FUN << 16);
+ OhciInitAfterPciInit (DeviceId, LocalCfgPtr);
+
+ if (LocalCfgPtr->Usb.OhciSsid != 0 ) {
+ RwPci ((USB4_OHCI_BUS_DEV_FUN << 16) + FCH_OHCI_REG2C, AccessWidth32, 0x00, LocalCfgPtr->Usb.OhciSsid, StdHeader);
+ }
+}
+
+/**
+ * OhciInitAfterPciInit - Config OHCI controller after PCI
+ * emulation
+ *
+ *
+ * @param[in] Value OHCI Controler info.
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+OhciInitAfterPciInit (
+ IN UINT32 Value,
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ FchOhciInitAfterPciInit ( Value, FchDataPtr);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/OhciReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/OhciReset.c
new file mode 100644
index 0000000..5926acb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/OhciReset.c
@@ -0,0 +1,62 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Ohci controller
+ *
+ * Init Ohci Controller features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_OHCIRESET_FILECODE
+
+/**
+ * FchInitResetOhci - Config Ohci controller during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetOhci (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/UsbEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/UsbEnv.c
new file mode 100644
index 0000000..712c8c4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/UsbEnv.c
@@ -0,0 +1,69 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch USB controller
+ *
+ * Init USB features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_USBENV_FILECODE
+
+
+/**
+ * FchInitEnvUsb - Config USB controller before PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvUsb (
+ IN VOID *FchDataPtr
+ )
+{
+ //
+ // Disabled All USB controller *** Move to each controller ***
+ //
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEF, AccessWidth8, BIT7, 0);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth16, (UINT32)~BIT2, BIT2 + BIT7 + BIT8 + BIT9);
+
+ FchSetUsbEnableReg (FchDataPtr);
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEE, AccessWidth8, (UINT32)~(BIT2), 0 );
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/UsbLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/UsbLate.c
new file mode 100644
index 0000000..7a84ed7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/UsbLate.c
@@ -0,0 +1,67 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch USB controller
+ *
+ * Init USB features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_USBLATE_FILECODE
+
+/**
+ * FchInitLateUsb - Config USB controller before OS Boot
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateUsb (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+ RwPmio (FCH_PMIOA_REGF4, AccessWidth8, (UINT32)~BIT0, BIT0, StdHeader);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/UsbMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/UsbMid.c
new file mode 100644
index 0000000..6b95148
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/UsbMid.c
@@ -0,0 +1,68 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch USB controller
+ *
+ * Init USB features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_USBMID_FILECODE
+
+/**
+ * FchInitMidUsb - Config USB controller after PCI emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidUsb (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
+ if ( LocalCfgPtr->Usb.UsbPhyPowerDown ) {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth8, (UINT32)~BIT0, BIT0);
+ } else {
+ RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth8, (UINT32)~BIT0, 0);
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/UsbReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/UsbReset.c
new file mode 100644
index 0000000..d538f906
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/UsbReset.c
@@ -0,0 +1,62 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Usb controller
+ *
+ * Init Usb Controller features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_USBRESET_FILECODE
+
+/**
+ * FchInitResetUsb - Config Usb controller during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetUsb (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/XhciEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/XhciEnv.c
new file mode 100644
index 0000000..ddcdbc9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/XhciEnv.c
@@ -0,0 +1,115 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch USB3 controller
+ *
+ * Init USB3 features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_XHCIENV_FILECODE
+
+// Declaration of local functions
+//
+VOID XhciInitBeforePciInit (IN FCH_DATA_BLOCK* FchDataPtr);
+VOID XhciInitIndirectReg (IN FCH_DATA_BLOCK* FchDataPtr);
+
+/**
+ * FchInitEnvUsbXhci - Config XHCI controller before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitEnvUsbXhci (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *)FchDataPtr;
+ StdHeader = LocalCfgPtr->StdHeader;
+
+ if ( LocalCfgPtr->Usb.Xhci0Enable == TRUE ) {
+ if ( LocalCfgPtr->Misc.S3Resume == 0 ) {
+ XhciInitBeforePciInit (LocalCfgPtr);
+ } else {
+ XhciInitIndirectReg (LocalCfgPtr);
+ }
+ } else {
+ //
+ // for power saving.
+ //
+ }
+}
+
+/**
+ * XhciInitIndirectReg - Config XHCI Indirect Registers
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+XhciInitIndirectReg (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ FchXhciInitIndirectReg (FchDataPtr);
+}
+
+/**
+ * XhciInitBeforePciInit - Config XHCI controller before PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+XhciInitBeforePciInit (
+ IN FCH_DATA_BLOCK *FchDataPtr
+ )
+{
+ FchXhciInitBeforePciInit ( FchDataPtr );
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/XhciLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/XhciLate.c
new file mode 100644
index 0000000..37926c2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/XhciLate.c
@@ -0,0 +1,62 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch USB3 controller
+ *
+ * Init USB3 features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_XHCILATE_FILECODE
+
+
+/**
+ * FchInitLateUsbXhci - Config USB3 controller before OS Boot
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitLateUsbXhci (
+ IN VOID *FchDataPtr
+ )
+{
+ FchInitLateUsbXhciProgram ( FchDataPtr );
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/XhciMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/XhciMid.c
new file mode 100644
index 0000000..7d8450e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/XhciMid.c
@@ -0,0 +1,77 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch USB3 controller
+ *
+ * Init USB3 features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*;********************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*********************************************************************************/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_XHCIMID_FILECODE
+
+/**
+ * FchInitMidUsbXhci - Config USB3 controller after PCI
+ * emulation
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitMidUsbXhci (
+ IN VOID *FchDataPtr
+ )
+{
+ FCH_DATA_BLOCK *LocalCfgPtr;
+
+ LocalCfgPtr = (FCH_DATA_BLOCK *)FchDataPtr;
+ if ( LocalCfgPtr->Usb.Xhci0Enable == TRUE ) {
+ RwPci ((USB_XHCI_BUS_DEV_FUN << 16) + FCH_XHCI_REG04, AccessWidth8, 0, BIT1, ((FCH_DATA_BLOCK *)FchDataPtr)->StdHeader);
+ if (((FCH_DATA_BLOCK *)FchDataPtr)->Usb.XhciSsid != 0 ) {
+ RwPci ((USB_XHCI_BUS_DEV_FUN << 16) + FCH_XHCI_REG2C, AccessWidth32, 0x00, ((FCH_DATA_BLOCK *)FchDataPtr)->Usb.XhciSsid, ((FCH_DATA_BLOCK *)FchDataPtr)->StdHeader);
+ }
+ }
+
+ if ( LocalCfgPtr->Usb.Xhci1Enable == TRUE ) {
+ RwPci ((USB_XHCI1_BUS_DEV_FUN << 16) + FCH_XHCI_REG04, AccessWidth8, 0, BIT1, ((FCH_DATA_BLOCK *)FchDataPtr)->StdHeader);
+ if (((FCH_DATA_BLOCK *)FchDataPtr)->Usb.XhciSsid != 0 ) {
+ RwPci ((USB_XHCI1_BUS_DEV_FUN << 16) + FCH_XHCI_REG2C, AccessWidth32, 0x00, ((FCH_DATA_BLOCK *)FchDataPtr)->Usb.XhciSsid, ((FCH_DATA_BLOCK *)FchDataPtr)->StdHeader);
+ }
+ RwXhciIndReg (FCH_XHCI_IND_REG04, (UINT32)~BIT8, BIT8, ((FCH_DATA_BLOCK *)FchDataPtr)->StdHeader);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/XhciReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/XhciReset.c
new file mode 100644
index 0000000..3cb5663
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Fch/Usb/XhciReset.c
@@ -0,0 +1,83 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Config Fch Xhci controller
+ *
+ * Init Xhci Controller features (PEI phase).
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: FCH
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+****************************************************************************
+*/
+#include "FchPlatform.h"
+#include "Filecode.h"
+#define FILECODE PROC_FCH_USB_XHCIRESET_FILECODE
+
+VOID
+FchInitRecoveryXhci (
+ IN VOID *FchDataPtr
+ );
+/**
+ * FchInitResetXhci - Config Xhci controller during Power-On
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitResetXhci (
+ IN VOID *FchDataPtr
+ )
+{
+ FchInitResetXhciProgram ( FchDataPtr );
+}
+
+/**
+ * FchInitRecoveryLpc - Config Xhci controller during Crisis
+ * Recovery
+ *
+ *
+ *
+ * @param[in] FchDataPtr Fch configuration structure pointer.
+ *
+ */
+VOID
+FchInitRecoveryXhci (
+ IN VOID *FchDataPtr
+ )
+{
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/Gnb.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/Gnb.h
new file mode 100644
index 0000000..100ae03
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/Gnb.h
@@ -0,0 +1,171 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Misc common definition
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 87645 $ @e \$Date: 2013-02-06 13:08:17 -0600 (Wed, 06 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNB_H_
+#define _GNB_H_
+
+#include "Ids.h"
+
+#pragma pack (push, 1)
+
+#define GNB_DEADLOOP() \
+{ \
+ VOLATILE BOOLEAN k; \
+ k = TRUE; \
+ while (k) { \
+ } \
+}
+#ifdef IDSOPT_TRACING_ENABLED
+ #if (IDSOPT_TRACING_ENABLED == TRUE)
+ #define GNB_TRACE_ENABLE
+ #endif
+#endif
+
+
+#ifndef GNB_DEBUG_CODE
+ #ifdef GNB_TRACE_ENABLE
+ #define GNB_DEBUG_CODE(Code) Code
+ #else
+ #define GNB_DEBUG_CODE(Code)
+ #endif
+#endif
+
+#ifndef MIN
+ #define MIN(x, y) (((x) > (y))? (y):(x))
+#endif
+
+#ifndef MAX
+ #define MAX(x, y) (((x) > (y))? (x):(y))
+#endif
+
+#define OFF 0
+
+#define PVOID UINT32
+
+#define STRING_TO_UINT32(a, b, c, d) ((UINT32) ((d << 24) | (c << 16) | (b << 8) | a))
+
+#define GnbLibGetHeader(x) ((AMD_CONFIG_PARAMS*) (x)->StdHeader)
+
+#define AGESA_STATUS_UPDATE(Current, Aggregated) \
+if (Current > Aggregated) { \
+ Aggregated = Current; \
+}
+
+#ifndef offsetof
+ #define offsetof(s, m) (UINTN)&(((s *)0)->m)
+#endif
+
+
+//Table properties
+
+#define TABLE_PROPERTY_DEFAULT 0x00000000ul
+#define TABLE_PROPERTY_IGFX_DISABLED 0x00000001ul
+#define TABLE_PROPERTY_IOMMU_DISABLED 0x00000002ul
+#define TABLE_PROPERTY_LCLK_DEEP_SLEEP 0x00000004ul
+#define TABLE_PROPERTY_BAPM 0x00000100ul
+#define TABLE_PROPERTY_NBDPM 0x00000800ul
+#define TABLE_PROPERTY_LOADLINE_ENABLE 0x00001000ul
+#define TABLE_PROPERTY_LHTC 0x00010000ul
+#define TABLE_PROPERTY_SVI2 0x00020000ul
+
+//Register access flags Flags
+#define GNB_REG_ACC_FLAG_S3SAVE 0x00000001ul
+
+// Gnb PCIe Master PLL
+#define GNB_PCIE_MASTERPLL_A 0xA
+#define GNB_PCIE_MASTERPLL_B 0xB
+#define GNB_PCIE_MASTERPLL_C 0xC
+#define GNB_PCIE_MASTERPLL_D 0xD
+
+/// LCLK DPM enable control
+typedef enum {
+ LclkDpmDisabled, ///<LCLK DPM disabled
+ LclkDpmRcActivity, ///<LCLK DPM enabled and use Root Complex Activity monitor method
+} LCLK_DPM_MODE;
+
+
+
+
+/// Topology information
+typedef struct {
+ BOOLEAN PhantomFunction; ///< PCIe topology have device with phantom function
+ BOOLEAN PcieToPciexBridge; ///< PCIe topology have device with Pcieto Pcix bridge
+} GNB_TOPOLOGY_INFO;
+
+
+/// GNB installable services
+typedef enum {
+ GnbPcieFamConfigService, ///< PCIe config service
+ GnbPcieFamInitService, ///< PCIe Init service
+ GnbPcieFamDebugService, ///< PCIe Debug service
+ GnbRegisterAccessService, ///< GNB register access service
+ GnbIommuService, ///< GNB IOMMU config service
+ GnbUraService, ///< GNB Ura service
+ GfxFamService, ///< GFX Family service
+ GnbPcieMaxPayloadService, ///< GNB MaxPayload service
+ GnbFamTsService ///< GNB TimeStamp service
+} GNB_SERVICE_ID;
+
+/// GNB service entry
+typedef struct _GNB_SERVICE {
+ GNB_SERVICE_ID ServiceId; ///< Service ID
+ UINT64 Family; ///< CPU family
+ VOID *ServiceProtocol; ///< Service protocol
+ struct _GNB_SERVICE *NextService; ///< Pointer to next service
+} GNB_SERVICE;
+
+/// GNB SMU Firmware Pointers
+typedef struct _GNB_FW_PTRS {
+ VOID *FirmwareType1; ///< Pointer to Type 1 SMU Firmware
+ VOID *FirmwareType2; ///< Poitner to Type 2 SMU Firmware
+} GNB_FW_PTRS;
+
+
+#define GNB_STRINGIZE(x) #x
+#define GNB_SERVICE_DEFINITIONS(x) GNB_STRINGIZE (Services/x/x.h)
+#define GNB_MODULE_DEFINITIONS(x) GNB_STRINGIZE (Modules/x/x.h)
+#define GNB_MODULE_INSTALL(x) GNB_STRINGIZE (Modules/x/x##Install.h)
+#pragma pack (pop)
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbF1Table.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbF1Table.h
new file mode 100644
index 0000000..add5509
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbF1Table.h
@@ -0,0 +1,99 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84159 $ @e \$Date: 2012-12-12 20:20:16 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+#ifndef _GNBF1TABLE_H_
+#define _GNBF1TABLE_H_
+
+#pragma pack (push, 1)
+
+#define PP_F1_MAX_NUM_DPM_STATE 5
+#define PP_F1_MAX_NUM_SW_STATE 6
+
+typedef struct {
+ UINT8 PPlayTableRev; ///< PP table revision
+ UINT8 PP_FUSE_ARRAY_V2_fld1[5];
+ UINT8 PP_FUSE_ARRAY_V2_fld2[5];
+ UINT8 PP_FUSE_ARRAY_V2_fld3;
+ UINT8 PP_FUSE_ARRAY_V2_fld4[6];
+ UINT8 PP_FUSE_ARRAY_V2_fld5[5];
+ UINT8 excel841_fld6[5]; ///< DispClk DID
+ UINT8 PcieGen2Vid; ///< Pcie Gen 2 VID
+ UINT8 MainPllId; ///< Main PLL Id from fuses
+ UINT8 WrCkDid; ///< WRCK SMU clock Divisor
+ UINT8 GpuBoostCap; ///< GPU boost cap
+ UINT32 PP_FUSE_ARRAY_V2_fld11;
+ UINT32 PP_FUSE_ARRAY_V2_fld12;
+ BOOLEAN PP_FUSE_ARRAY_V2_fld13;
+ UINT8 VceFlags[5]; ///< VCE Flags
+ UINT8 VceMclk; ///< MCLK for VCE
+ UINT8 PP_FUSE_ARRAY_V2_fld16[4];
+ UINT8 EclkDid[5]; ///< Eclk DID
+ UINT8 HtcEn; ///< HTC Enabled
+ UINT8 HtcTmpLmt; ///< HTC Temperature Limit
+ UINT8 PP_FUSE_ARRAY_V2_fld20;
+ UINT8 PP_FUSE_ARRAY_V2_fld21;
+ UINT8 DisDllShutdownSR[4]; ///< DRAM Configuration Low [per DCT]
+ UINT8 MemClkFreq[4]; ///< DRAM Configuration High [per DCT]
+ UINT8 MemPhyPllPdMode[4]; ///< DRAM Controller Miscellaneous 2 [per DCT]
+ UINT8 M1MemClkFreq[4]; ///< Memory PState Control and Status [per DCT]
+ UINT8 PP_FUSE_ARRAY_V2_fld26[4];
+ UINT8 PP_FUSE_ARRAY_V2_fld27[4];
+ UINT8 PP_FUSE_ARRAY_V2_fld28[4];
+ UINT8 PP_FUSE_ARRAY_V2_fld29[4];
+ UINT8 PP_FUSE_ARRAY_V2_fld30[4];
+ UINT8 PP_FUSE_ARRAY_V2_fld31[4];
+ UINT8 PP_FUSE_ARRAY_V2_fld32[5];
+ UINT8 PP_FUSE_ARRAY_V2_fld33[5];
+ UINT8 PP_FUSE_ARRAY_V2_fld34[5];
+ UINT8 PP_FUSE_ARRAY_V2_fld35[5];
+ UINT8 PP_FUSE_ARRAY_V2_fld36;
+ UINT8 PP_FUSE_ARRAY_V2_fld37;
+ UINT8 PP_FUSE_ARRAY_V2_fld38;
+} PP_F1_ARRAY_V2;
+
+#pragma pack (pop)
+
+#endif
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbFamServices.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbFamServices.h
new file mode 100644
index 0000000..94510c3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbFamServices.h
@@ -0,0 +1,141 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe family specific services.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 86079 $ @e \$Date: 2013-01-16 00:59:04 -0600 (Wed, 16 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBFAMSERVICES_H_
+#define _GNBFAMSERVICES_H_
+
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbIommu.h"
+
+typedef AGESA_STATUS (F_GNB_REGISTER_ACCESS) (
+ IN GNB_HANDLE *GnbHandle,
+ IN UINT8 RegisterSpaceType,
+ IN UINT32 Address,
+ IN VOID *Value,
+ IN UINT32 Flags,
+ IN AMD_CONFIG_PARAMS *StdHeader
+);
+
+/// Register Read/Write protocol
+typedef struct {
+ F_GNB_REGISTER_ACCESS *Read; ///< Read Register
+ F_GNB_REGISTER_ACCESS *Write; ///< Write Register
+} GNB_REGISTER_SERVICE;
+
+AGESA_STATUS
+GnbFmCreateIvrsEntry (
+ IN GNB_HANDLE *GnbHandle,
+ IN IVRS_BLOCK_TYPE Type,
+ IN VOID *Ivrs,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef AGESA_STATUS F_GNBFMCREATEIVRSENTRY (
+ IN GNB_HANDLE *GnbHandle,
+ IN IVRS_BLOCK_TYPE Type,
+ IN VOID *Ivrs,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GnbFmCheckIommuPresent (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef BOOLEAN F_GNBFMCHECKIOMMUPRESENT (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// GNB IOMMU services
+typedef struct {
+ F_GNBFMCHECKIOMMUPRESENT *GnbFmCheckIommuPresent; ///< GnbFmCheckIommuPresent
+ F_GNBFMCREATEIVRSENTRY *GnbFmCreateIvrsEntry; ///< GnbFmCreateIvrsEntry
+} GNB_FAM_IOMMU_SERVICES;
+
+
+typedef UINT8 (F_PCIE_MAXPAYLOAD_SETTING) (
+ IN PCIe_ENGINE_CONFIG *Engine
+);
+
+/// MaxPayload service protocol
+typedef struct {
+ F_PCIE_MAXPAYLOAD_SETTING *SetMaxPayload; ///< Write Register
+} PCIE_MAXPAYLOAD_SERVICE;
+
+
+
+PCI_ADDR
+GnbFmGetPciAddress (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GnbFmGetBusDecodeRange (
+ IN GNB_HANDLE *GnbHandle,
+ OUT UINT8 *StartBusNumber,
+ OUT UINT8 *EndBusNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GnbFmGetLinkId (
+ IN GNB_HANDLE *GnbHandle,
+ OUT UINT8 *LinkId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef UINT32 F_GNBTIMESTAMP (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// GNB Timestamp services
+typedef struct {
+ F_GNBTIMESTAMP *GnbFmTimeStamp; ///< GnbFmTimeStamp
+} GNB_FAM_TS_SERVICES;
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbGfx.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbGfx.h
new file mode 100644
index 0000000..d5c571b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbGfx.h
@@ -0,0 +1,348 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize GFX configuration data structure.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 86709 $ @e \$Date: 2013-01-24 17:39:09 -0600 (Thu, 24 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBGFX_H_
+#define _GNBGFX_H_
+
+#define DEVICE_DFP 0x1
+#define DEVICE_CRT 0x2
+#define DEVICE_LCD 0x3
+
+
+#define CONNECTOR_DISPLAYPORT_ENUM 0x3013
+#define CONNECTOR_HDMI_TYPE_A_ENUM 0x300c
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM 0x3003
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM 0x3004
+#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM 0x3001
+#define CONNECTOR_DUAL_LINK_DVI_I_ENUM 0x3002
+#define CONNECTOR_VGA_ENUM 0x3005
+#define CONNECTOR_LVDS_ENUM 0x300E
+#define CONNECTOR_eDP_ENUM 0x3014
+#define CONNECTOR_LVDS_eDP_ENUM 0x3016
+//DP to VGA:
+#define ENCODER_DP2VGA_ENUM_ID1 0x2123
+//DP to LVDS:
+#define ENCODER_DP2LVDS_ENUM_ID2 0x2223
+#define ENCODER_ALMOND_ENUM_ID1 0x2122
+#define ENCODER_NOT_PRESENT 0x0000
+
+// no eDP->LVDS translator chip
+#define eDP_TO_LVDS_RX_DISABLE 0x00
+// common eDP->LVDS translator chip without AMD SW init
+#define eDP_TO_LVDS_COMMON_ID 0x01
+// Third party translator which requires AMD SW init
+#define eDP_TO_LVDS_SWINIT_ID 0x02
+
+
+#define ATOM_DEVICE_CRT1_SUPPORT 0x0001
+#define ATOM_DEVICE_DFP1_SUPPORT 0x0008
+#define ATOM_DEVICE_DFP6_SUPPORT 0x0040
+#define ATOM_DEVICE_DFP2_SUPPORT 0x0080
+#define ATOM_DEVICE_DFP3_SUPPORT 0x0200
+#define ATOM_DEVICE_DFP4_SUPPORT 0x0400
+#define ATOM_DEVICE_DFP5_SUPPORT 0x0800
+#define ATOM_DEVICE_LCD1_SUPPORT 0x0002
+
+/// Graphics card information structure
+typedef struct {
+ UINT32 AmdPcieGfxCardBitmap; ///< AMD PCIE graphics card information
+ UINT32 PcieGfxCardBitmap; ///< All PCIE graphics card information
+ UINT32 PciGfxCardBitmap; ///< All PCI graphics card information
+} GFX_CARD_CARD_INFO;
+
+typedef enum {
+ iGpuVgaAdapter, ///< Configure iGPU as VGA adapter
+ iGpuVgaNonAdapter ///< Configure iGPU as non VGA adapter
+} GFX_IGPU_VGA_MODE;
+
+/// UMA Steering Mode
+typedef enum {
+ UMA_STEERING_ENUM0,
+ SystemTrafficOnion, ///< System traffic to onion
+ Onion, ///< Onion
+ UMA_STEERING_ENUM3,
+} UMA_STEERING;
+
+/// User Options
+typedef enum {
+ OptionDisabled, ///< Disabled
+ OptionEnabled ///< Enabled
+} CONTROL_OPTION;
+
+/// GFX enable Policy
+typedef enum {
+ GmcPowerGatingDisabled, ///< Disable Power gating
+ GmcPowerGatingStutterOnly, ///< GMC Stutter Only mode
+ GmcPowerGatingWithStutter ///< GMC Power gating with Stutter mode
+} GMC_POWER_GATING;
+
+/// Internal GFX mode
+typedef enum {
+ GfxControllerLegacyBridgeMode, ///< APC bridge Legacy mode
+ GfxControllerPcieEndpointMode, ///< IGFX PCIE Bus 0, Device 1
+} GFX_CONTROLLER_MODE;
+
+/// Graphics Platform Configuration
+typedef struct {
+ PVOID StdHeader; ///< Standard Header
+ PCI_ADDR GfxPciAddress; ///< Graphics PCI Address
+ UMA_INFO UmaInfo; ///< UMA Information
+ UINT64 GmmBase; ///< GMM Base
+ UINT8 GnbHdAudio; ///< Control GFX HD Audio controller(Used for HDMI and DP display output),
+ ///< essentially it enables function 1 of graphics device.
+ ///< @li 0 = HD Audio disable
+ ///< @li 1 = HD Audio enable
+ UINT8 AbmSupport; ///< Automatic adjust LVDS/eDP Back light level support.It is
+ ///< characteristic specific to display panel which used by platform design.
+ ///< @li 0 = ABM support disabled
+ ///< @li 1 = ABM support enabled
+ UINT8 DynamicRefreshRate; ///< Adjust refresh rate on LVDS/eDP.
+ UINT16 LcdBackLightControl; ///< The PWM frequency to LCD backlight control.
+ ///< If equal to 0 backlight not controlled by iGPU.
+ UINT32 AmdPlatformType; ///< Platform type
+ UMA_STEERING UmaSteering; ///< UMA Steering
+ GFX_IGPU_VGA_MODE iGpuVgaMode; ///< iGPU VGA mode
+ BOOLEAN GmcClockGating; ///< Clock gating
+ BOOLEAN GmcLockRegisters; ///< GmcLock Registers
+ BOOLEAN GfxFusedOff; ///< Record if GFX is fused off.
+ GMC_POWER_GATING GmcPowerGating; ///< Gmc Power Gating.
+ UINT8 Gnb3dStereoPinIndex; ///< 3D Stereo Pin ID
+ GFX_CONTROLLER_MODE GfxControllerMode; ///< Gfx controller mode
+ UINT16 LvdsSpreadSpectrum; ///< Spread spectrum value in 0.01 %
+ UINT16 LvdsSpreadSpectrumRate; ///< Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz
+ UINT8 LvdsPowerOnSeqDigonToDe; ///< Panel initialization timing.
+ UINT8 LvdsPowerOnSeqDeToVaryBl; ///< Panel initialization timing.
+ UINT8 LvdsPowerOnSeqDeToDigon; ///< Panel initialization timing.
+ UINT8 LvdsPowerOnSeqVaryBlToDe; ///< Panel initialization timing.
+ UINT8 LvdsPowerOnSeqOnToOffDelay; ///< Panel initialization timing.
+ UINT8 LvdsPowerOnSeqVaryBlToBlon; ///< Panel initialization timing.
+ UINT8 LvdsPowerOnSeqBlonToVaryBl; ///< Panel initialization timing.
+ UINT16 LvdsMaxPixelClockFreq; ///< The maximum pixel clock frequency supported.
+ UINT32 LcdBitDepthControlValue; ///< The LCD bit depth control settings.
+ UINT8 Lvds24bbpPanelMode; ///< The LVDS 24 BBP mode.
+ LVDS_MISC_CONTROL LvdsMiscControl; ///< THe LVDS swap/Hsync/Vsync/BLON/Volt-overwrite control
+ GFX_CARD_CARD_INFO GfxDiscreteCardInfo; ///< Discrete GFX card info
+ UINT16 PcieRefClkSpreadSpectrum; ///< Spread spectrum value in 0.01 %
+ BOOLEAN GnbRemoteDisplaySupport; ///< Wireless Display Enable
+ UINT8 LVDSVoltAdjust; ///< when ucLVDSMisc[5]=1, then this value will be programmed to register LVDS_CTRL_4 to adjust LVDS output voltage
+ DISPLAY_MISC_CONTROL DisplayMiscControl; ///< The Display misc control
+ DP_FIXED_VOLT_SWING_TYPE DpFixedVoltSwingType; ///< To indicate fixed voltage swing value
+ UINT8 MinAllowedBLLevel; ///< Minimum allowed LCD backlight level
+} GFX_PLATFORM_CONFIG;
+
+
+typedef UINT32 ULONG;
+typedef UINT16 USHORT;
+typedef UINT8 UCHAR;
+
+/// Driver interface header structure
+typedef struct _ATOM_COMMON_TABLE_HEADER {
+ USHORT usStructureSize; ///< Structure size
+ UCHAR ucTableFormatRevision; ///< Format revision number
+ UCHAR ucTableContentRevision; ///< Contents revision number
+} ATOM_COMMON_TABLE_HEADER;
+
+/// Link ping mapping for DP/eDP/LVDS
+typedef struct _ATOM_DP_CONN_CHANNEL_MAPPING {
+ UCHAR ucDP_Lane0_Source :2; ///< Define which pin connect to DP connector DP_Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+ UCHAR ucDP_Lane1_Source :2; ///< Define which pin connect to DP connector DP_Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+ UCHAR ucDP_Lane2_Source :2; ///< Define which pin connect to DP connector DP_Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+ UCHAR ucDP_Lane3_Source :2; ///< Define which pin connect to DP connector DP_Lane3, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+} ATOM_DP_CONN_CHANNEL_MAPPING;
+
+/// Link ping mapping for DVI/HDMI
+typedef struct _ATOM_DVI_CONN_CHANNEL_MAPPING {
+ UCHAR ucDVI_DATA2_Source :2; ///< Define which pin connect to DVI connector data Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+ UCHAR ucDVI_DATA1_Source :2; ///< Define which pin connect to DVI connector data Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+ UCHAR ucDVI_DATA0_Source :2; ///< Define which pin connect to DVI connector data Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+ UCHAR ucDVI_CLK_Source :2; ///< Define which pin connect to DVI connector clock lane, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+} ATOM_DVI_CONN_CHANNEL_MAPPING;
+
+
+/// External Display Path
+typedef struct _EXT_DISPLAY_PATH {
+ USHORT usDeviceTag; ///< A bit vector to show what devices are supported
+ USHORT usDeviceACPIEnum; ///< 16bit device ACPI id.
+ USHORT usDeviceConnector; ///< A physical connector for displays to plug in, using object connector definitions
+ UCHAR ucExtAUXDDCLutIndex; ///< An index into external AUX/DDC channel LUT
+ UCHAR ucExtHPDPINLutIndex; ///< An index into external HPD pin LUT
+ USHORT usExtEncoderObjId; ///< external encoder object id
+ union { ///< Lane mapping
+ UCHAR ucChannelMapping; ///< lane mapping on connector (ucChannelMapping=0 use default)
+ ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping; ///< lane mapping on connector (ucChannelMapping=0 use default)
+ ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping; ///< lane mapping on connector (ucChannelMapping=0 use default)
+ } ChannelMapping;
+ UCHAR ucChPNInvert; ///< Bit vector for up to 8 lanes. 0: P and N is not invert, 1: P and N is inverted
+ USHORT usCaps; ///< Capabilities IF BIT[0] == 1, downgrade phy link to DP1.1
+ USHORT usReserved; ///< Reserved
+} EXT_DISPLAY_PATH;
+
+/// External Display Connection Information
+typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO {
+ ATOM_COMMON_TABLE_HEADER sHeader; ///< Standard Header
+ UCHAR ucGuid [16]; ///< Guid
+ EXT_DISPLAY_PATH sPath[7]; ///< External Display Path
+ UCHAR ucChecksum; ///< Checksum
+ UCHAR uc3DStereoPinId; ///< 3D Stereo Pin ID
+ UCHAR ucRemoteDisplayConfig; ///< Bit0=1:Enable Wireless Display through APU VCE HW function
+ UCHAR uceDPToLVDSRxId; ///< 3rd party eDP to LVDS translator chip presented. 0:no, 1:chip without AMD SW init, 2:Third party translator which require AMD SW init
+ UCHAR ucFixDPVoltageSwing; ///< The value match DPCD register DPx_LANE_SET defined in DP spec
+ UCHAR Reserved [3]; ///< Reserved
+} ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;
+
+/// DispClk to VID relation table
+typedef struct _ATOM_CLK_VOLT_CAPABILITY {
+ ULONG ulVoltageIndex; ///< The Voltage Index indicated by FUSE, same voltage index shared with SCLK DPM fuse table
+ ULONG ulMaximumSupportedCLK;///< Maximum clock supported with specified voltage index, unit in 10kHz
+} ATOM_CLK_VOLT_CAPABILITY;
+
+typedef struct _GnbGfx275_STRUCT {
+ ULONG GnbGfx275_STRUCT_fld0;
+ USHORT GnbGfx275_STRUCT_fld1;
+ USHORT GnbGfx275_STRUCT_fld2;
+} GnbGfx275_STRUCT;
+
+/// TDP Configuration Bitfields
+typedef struct _ATOM_TDP_CONFIG_BITS {
+ UINT32 uCTDP_Enable:2; ///< = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value))
+ UINT32 uCTDP_Value:14; ///< Override value in tens of milli watts
+ UINT32 uTDP_Value:14; ///< Original TDP value in tens of milli watts
+ UINT32 uReserved:2; ///< Reserved
+} ATOM_TDP_CONFIG_BITS;
+
+/// TDP Configuration Union
+typedef union _ATOM_TDP_CONFIG {
+ ATOM_TDP_CONFIG_BITS TDP_config; ///< Field-wise access
+ ULONG TDP_config_all; ///< Access to all
+} ATOM_TDP_CONFIG;
+
+
+/// IntegrateSystemInfoTable is used for Kaveri & Kabini APU
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_8 {
+ ATOM_COMMON_TABLE_HEADER sHeader; ///<
+ ULONG ulBootUpEngineClock; ///<
+ ULONG field2; ///<
+ ULONG ulBootUpUMAClock; ///<
+ ATOM_CLK_VOLT_CAPABILITY ATOM_INTEGRATED_SYSTEM_INFO_V1_8_fld4[4]; ///<
+ ULONG ulBootUpReqDisplayVector; ///<
+ ULONG ulVBIOSMisc; ///<
+ ULONG ulGPUCapInfo; ///<
+ ULONG ulReserved1; ///<
+ USHORT usRequestedPWMFreqInHz; ///<
+ UCHAR ucHtcTmpLmt; ///<
+ UCHAR ATOM_INTEGRATED_SYSTEM_INFO_V1_8_fld11; ///<
+ ULONG ulReserved2; ///<
+ ULONG ulSystemConfig; ///<
+ ULONG ulCPUCapInfo; ///<
+ ULONG ulReserved3; ///<
+ USHORT usReserved1; ///<
+ USHORT usExtDispConnInfoOffset; ///<
+ USHORT usPanelRefreshRateRange; ///<
+ UCHAR ucMemoryType; ///<
+ UCHAR ucUMAChannelNumber; ///<
+ UCHAR strVBIOSMsg[40]; ///<
+ ULONG ulReserved[20]; ///<
+ GnbGfx275_STRUCT ATOM_INTEGRATED_SYSTEM_INFO_V1_8[5]; ///<
+ ULONG ulGMCRestoreResetTime; ///<
+ ULONG ulReserved4; ///<
+ ULONG ulIdleNClk; ///<
+ ULONG ulDDR_DLL_PowerUpTime; ///<
+ ULONG ulDDR_PLL_PowerUpTime; ///<
+ USHORT usPCIEClkSSPercentage; ///<
+ USHORT usPCIEClkSSType; ///<
+ USHORT usLvdsSSPercentage; ///<
+ USHORT usLvdsSSpreadRateIn10Hz; ///<
+ USHORT usHDMISSPercentage; ///<
+ USHORT usHDMISSpreadRateIn10Hz; ///<
+ USHORT usDVISSPercentage; ///<
+ USHORT usDVISSpreadRateIn10Hz; ///<
+ ULONG ulReserved5[5]; ///<
+ USHORT usMaxLVDSPclkFreqInSingleLink; ///<
+ UCHAR ucLvdsMisc; ///<
+ UCHAR ucLVDSVoltAdjust; ///<
+ UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms; ///<
+ UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms; ///<
+ UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms; ///<
+ UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms; ///<
+ UCHAR ucLVDSOffToOnDelay_in4Ms; ///<
+ UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms; ///<
+ UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms; ///<
+ UCHAR ucMinAllowedBL_Level; ///<
+ ULONG ulLCDBitDepthControlVal; ///<
+ ULONG ulNbpStateMemclkFreq[4]; ///<
+ ULONG ulReserved6; ///<
+ ULONG ulNbpStateNClkFreq[4]; ///<
+ USHORT usNBPStateVoltage[4]; ///<
+ USHORT usBootUpNBVoltage; ///<
+ USHORT usReserved2; ///<
+ ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; ///<
+} ATOM_INTEGRATED_SYSTEM_INFO_V1_8;
+
+/// this Table is used for Kaveri/Kabini APU
+typedef struct _ATOM_FUSION_SYSTEM_INFO_V3 {
+ ATOM_INTEGRATED_SYSTEM_INFO_V1_8 sIntegratedSysInfo; ///< Refer to ATOM_INTEGRATED_SYSTEM_INFO_V1_8 definition.
+ ULONG ulPowerplayTable[128]; ///< This 512 bytes memory is used to save ATOM_PPLIB_POWERPLAYTABLE3, starting form ulPowerplayTable[0]
+} ATOM_FUSION_SYSTEM_INFO_V3;
+
+#define GNB_SBDFO MAKE_SBDFO(0, 0, 0, 0, 0)
+
+/// Define configuration values for ulGPUCapInfo
+// BIT[0] - TMDS/HDMI Coherent Mode 0: use cascade PLL mode, 1: use single PLL mode.
+#define GPUCAPINFO_TMDS_HDMI_USE_CASCADE_PLL_MODE 0x00ul
+#define GPUCAPINFO_TMDS_HDMI_USE_SINGLE_PLL_MODE 0x01ul
+
+// BIT[1] - DP mode 0: use cascade PLL mode, 1: use single PLL mode
+#define GPUCAPINFO_DP_MODE_USE_CASCADE_PLL_MODE 0x00ul
+#define GPUCAPINFO_DP_USE_SINGLE_PLL_MODE 0x02ul
+
+// BIT[3] - AUX HW mode detection logic 0: Enable, 1: Disable
+#define GPUCAPINFO_AUX_HW_MODE_DETECTION_ENABLE 0x00ul
+#define GPUCAPINFO_AUX_HW_MODE_DETECTION_DISABLE 0x08ul
+
+// BIT[4] - DFS bypass 0: Disable, 1: Enable
+#define GPUCAPINFO_DFS_BYPASS_DISABLE 0x00ul
+#define GPUCAPINFO_DFS_BYPASS_ENABLE 0x10ul
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbGfxFamServices.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbGfxFamServices.h
new file mode 100644
index 0000000..b4160e6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbGfxFamServices.h
@@ -0,0 +1,102 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe family specific services.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBGFXFAMSERVICES_H_
+#define _GNBGFXFAMSERVICES_H_
+
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbPcie.h"
+
+AGESA_STATUS
+GfxFmMapEngineToDisplayPath (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ OUT EXT_DISPLAY_PATH *DisplayPathList,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+typedef AGESA_STATUS F_GFXMAPENGINETODISPLAYPATH (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ OUT EXT_DISPLAY_PATH *DisplayPathList,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+UINT32
+GfxFmCalculateClock (
+ IN UINT8 Did,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef UINT32 F_GFXCALCULATECLOCK (
+ IN UINT8 Did,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GfxFmIsVbiosPosted (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+typedef BOOLEAN F_GFXISVBIOSPOSTED (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+VOID
+GfxFmDisableController (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef VOID F_GFXDISABLECONTROLLER (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/// GFX Family services
+typedef struct {
+ F_GFXMAPENGINETODISPLAYPATH *GfxMapEngineToDisplayPath; ///< GfxMapEngineToDisplayPath
+ F_GFXDISABLECONTROLLER *GfxDisableController; ///< GfxDisableController
+ F_GFXCALCULATECLOCK *GfxCalculateClock; ///< GfxCalculateClock
+ F_GFXISVBIOSPOSTED *GfxIsVbiosPosted; ///< GfxIsVbiosPosted;
+} GFX_FAM_SERVICES;
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbIommu.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbIommu.h
new file mode 100644
index 0000000..c37c214
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbIommu.h
@@ -0,0 +1,195 @@
+/**
+ * @file
+ *
+ * Misc common definition
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBIOMMU_H_
+#define _GNBIOMMU_H_
+
+#pragma pack (push, 1)
+
+
+/// IVRS block
+typedef enum {
+ IvrsIvhdBlock = 0x10, ///< I/O Virtualization Hardware Definition Block
+ IvrsIvmdBlock = 0x20, ///< I/O Virtualization Memory Definition Block for all peripherals
+ IvrsIvmdBlockSingle = 0x21, ///< IVMD block for specified peripheral
+ IvrsIvmdBlockRange = 0x22, ///< IVMD block for peripheral range
+ IvrsIvhdrBlock = 0x40, ///< IVHDR (Relative) block
+ IvrsIvmdrBlock = 0x50, ///< IVMDR (Relative) block for all peripherals
+ IvrsIvmdrBlockSingle = 0x51 ///< IVMDR block for last IVHDR
+} IVRS_BLOCK_TYPE;
+
+#define DEVICE_ID(PciAddress) (UINT16) (((PciAddress).Address.Bus << 8) | ((PciAddress).Address.Device << 3) | (PciAddress).Address.Function)
+
+/// IVHD entry types
+typedef enum {
+ IvhdEntryPadding = 0, ///< Table padding
+ IvhdEntrySelect = 2, ///< Select
+ IvhdEntryStartRange = 3, ///< Start Range
+ IvhdEntryEndRange = 4, ///< End Range
+ IvhdEntryAliasSelect = 66, ///< Alias select
+ IvhdEntryAliasStartRange = 67, ///< Alias start range
+ IvhdEntryExtendedSelect = 70, ///< Extended select
+ IvhdEntryExtendedStartRange = 71, ///< Extended Start range
+ IvhdEntrySpecialDevice = 72 ///< Special device
+} IVHD_ENTRY_TYPE;
+
+/// Special device variety
+typedef enum {
+ IvhdSpecialDeviceIoapic = 0x1, ///< IOAPIC
+ IvhdSpecialDeviceHpet = 0x2 ///< HPET
+} IVHD_SPECIAL_DEVICE;
+
+
+#define IVHD_FLAG_COHERENT BIT5
+#define IVHD_FLAG_IOTLBSUP BIT4
+#define IVHD_FLAG_ISOC BIT3
+#define IVHD_FLAG_RESPASSPW BIT2
+#define IVHD_FLAG_PASSPW BIT1
+#define IVHD_FLAG_PPRSUB BIT7
+#define IVHD_FLAG_PREFSUP BIT6
+
+#define IVHD_EFR_XTSUP_OFFSET 0
+#define IVHD_EFR_NXSUP_OFFSET 1
+#define IVHD_EFR_GTSUP_OFFSET 2
+#define IVHD_EFR_GLXSUP_OFFSET 3
+#define IVHD_EFR_IASUP_OFFSET 5
+#define IVHD_EFR_GASUP_OFFSET 6
+#define IVHD_EFR_HESUP_OFFSET 7
+#define IVHD_EFR_PASMAX_OFFSET 8
+#define IVHD_EFR_PNCOUNTERS_OFFSET 13
+#define IVHD_EFR_PNBANKS_OFFSET 17
+#define IVHD_EFR_MSINUMPPR_OFFSET 23
+#define IVHD_EFR_GATS_OFFSET 28
+#define IVHD_EFR_HATS_OFFSET 30
+
+#define IVINFO_HTATSRESV_MASK 0x00400000ul
+#define IVINFO_VASIZE_MASK 0x003F8000ul
+#define IVINFO_PASIZE_MASK 0x00007F00ul
+#define IVINFO_GASIZE_MASK 0x000000E0ul
+
+#define IVHD_INFO_MSINUM_OFFSET 0
+#define IVHD_INFO_UNITID_OFFSET 8
+
+#define IVMD_FLAG_EXCLUSION_RANGE BIT3
+#define IVMD_FLAG_IW BIT2
+#define IVMD_FLAG_IR BIT1
+#define IVMD_FLAG_UNITY BIT0
+
+/// IVRS header
+typedef struct {
+ UINT8 Sign[4]; ///< Signature
+ UINT32 TableLength; ///< Table Length
+ UINT8 Revision; ///< Revision
+ UINT8 Checksum; ///< Checksum
+ UINT8 OemId[6]; ///< OEM ID
+ UINT8 OemTableId[8]; ///< OEM Tabled ID
+ UINT32 OemRev; ///< OEM Revision
+ UINT8 CreatorId[4]; ///< Creator ID
+ UINT32 CreatorRev; ///< Creator Revision
+ UINT32 IvInfo; ///< IvInfo
+ UINT64 Reserved; ///< Reserved
+} IOMMU_IVRS_HEADER;
+
+/// IVRS IVHD Entry
+typedef struct {
+ UINT8 Type; ///< Type
+ UINT8 Flags; ///< Flags
+ UINT16 Length; ///< Length
+ UINT16 DeviceId; ///< DeviceId
+ UINT16 CapabilityOffset; ///< CapabilityOffset
+ UINT64 BaseAddress; ///< BaseAddress
+ UINT16 PciSegment; ///< Pci segment
+ UINT16 IommuInfo; ///< IOMMU info
+ UINT32 IommuEfr; ///< reserved
+} IVRS_IVHD_ENTRY;
+
+/// IVHD generic entry
+typedef struct {
+ UINT8 Type; ///< Type
+ UINT16 DeviceId; ///< Device id
+ UINT8 DataSetting; ///< Data settings
+} IVHD_GENERIC_ENTRY;
+
+///IVHD alias entry
+typedef struct {
+ UINT8 Type; ///< Type
+ UINT16 DeviceId; ///< Device id
+ UINT8 DataSetting; ///< Data settings
+ UINT8 Reserved; ///< Reserved
+ UINT16 AliasDeviceId; ///< Alias device id
+ UINT8 Reserved2; ///< Reserved
+} IVHD_ALIAS_ENTRY;
+
+///IVHD extended entry
+typedef struct {
+ UINT8 Type; ///< Type
+ UINT16 DeviceId; ///< Device id
+ UINT8 DataSetting; ///< Data settings
+ UINT32 ExtSetting; ///< Extended settings
+} IVHD_EXT_ENTRY;
+
+/// IVHD special entry
+typedef struct {
+ UINT8 Type; ///< Type
+ UINT16 Reserved; ///< Reserved
+ UINT8 DataSetting; ///< Data settings
+ UINT8 Handle; ///< Handle
+ UINT16 AliasDeviceId; ///< Alis device id
+ UINT8 Variety; ///< Variety
+} IVHD_SPECIAL_ENTRY;
+
+/// IVRS IVMD Entry
+typedef struct {
+ UINT8 Type; ///< Type
+ UINT8 Flags; ///< Flags
+ UINT16 Length; ///< Length
+ UINT16 DeviceId; ///< DeviceId
+ UINT16 AuxiliaryData; ///< Auxiliary data
+ UINT64 Reserved; ///< Reserved (0000_0000_0000_0000)
+ UINT64 BlockStart; ///< IVMD start address
+ UINT64 BlockLength; ///< IVMD memory block length
+} IVRS_IVMD_ENTRY;
+
+#pragma pack (pop)
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbLibFeatures.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbLibFeatures.c
new file mode 100644
index 0000000..4606d3d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbLibFeatures.c
@@ -0,0 +1,111 @@
+/* $NoKeywords:$ */
+ /**
+ * @file
+ *
+ * GNB register access services.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "Gnb.h"
+#include "OptionGnb.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_COMMON_GNBLIBFEATURES_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+GnbLibDispatchFeatures (
+ IN OPTION_GNB_CONFIGURATION *ConfigTable,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Dispatch feature table
+ *
+ *
+ */
+
+AGESA_STATUS
+GnbLibDispatchFeatures (
+ IN OPTION_GNB_CONFIGURATION *ConfigTable,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ CPU_LOGICAL_ID LogicalId;
+
+ AgesaStatus = AGESA_SUCCESS;
+ GetLogicalIdOfCurrentCore (&LogicalId, StdHeader);
+ while (ConfigTable->GnbFeature != NULL) {
+ if ((ConfigTable->Type & LogicalId.Family) != 0) {
+ if (ConfigTable->TestPoint != 0) {
+ AGESA_TESTPOINT (ConfigTable->TestPoint, StdHeader);
+ }
+ Status = ConfigTable->GnbFeature (StdHeader);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ }
+ ConfigTable++;
+ }
+ return AgesaStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbLibFeatures.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbLibFeatures.h
new file mode 100644
index 0000000..6d27c4b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbLibFeatures.h
@@ -0,0 +1,55 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB register access services.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBLIBFEATURES_H_
+#define _GNBLIBFEATURES_H_
+
+
+AGESA_STATUS
+GnbLibDispatchFeatures (
+ IN OPTION_GNB_CONFIGURATION *ConfigTable,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbPcie.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbPcie.h
new file mode 100644
index 0000000..87a8b35
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbPcie.h
@@ -0,0 +1,398 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe component definitions.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85947 $ @e \$Date: 2013-01-14 17:25:21 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+
+*
+*/
+
+#ifndef _GNBPCIE_H_
+#define _GNBPCIE_H_
+
+#pragma pack (push, 1)
+
+#define MAX_NUMBER_OF_COMPLEXES 4
+
+#define DESCRIPTOR_TERMINATE_GNB 0x40000000ull
+#define DESCRIPTOR_TERMINATE_TOPOLOGY 0x20000000ull
+#define DESCRIPTOR_ALLOCATED 0x10000000ull
+#define DESCRIPTOR_VIRTUAL 0x08000000ull
+#define DESCRIPTOR_PLATFORM 0x04000000ull
+#define DESCRIPTOR_COMPLEX 0x02000000ull
+#define DESCRIPTOR_SILICON 0x01000000ull
+#define DESCRIPTOR_PCIE_WRAPPER 0x00800000ull
+#define DESCRIPTOR_DDI_WRAPPER 0x00400000ull
+#define DESCRIPTOR_PCIE_ENGINE 0x00200000ull
+#define DESCRIPTOR_DDI_ENGINE 0x00100000ull
+
+#define DESCRIPTOR_ALL_WRAPPERS (DESCRIPTOR_DDI_WRAPPER | DESCRIPTOR_PCIE_WRAPPER)
+#define DESCRIPTOR_ALL_ENGINES (DESCRIPTOR_DDI_ENGINE | DESCRIPTOR_PCIE_ENGINE)
+
+#define DESCRIPTOR_ALL_TYPES (DESCRIPTOR_ALL_WRAPPERS | DESCRIPTOR_ALL_ENGINES | DESCRIPTOR_SILICON | DESCRIPTOR_PLATFORM)
+
+#define UNUSED_LANE_ID 128
+//#define PCIE_LINK_RECEIVER_DETECTION_POOLING (60 * 1000)
+//#define PCIE_LINK_L0_POOLING (60 * 1000)
+//#define PCIE_LINK_GPIO_RESET_ASSERT_TIME (2 * 1000)
+//#define PCIE_LINK_RESET_TO_TRAINING_TIME (2 * 1000)
+
+// Get lowest PHY lane on engine
+#define PcieLibGetLoPhyLane(Engine) (Engine != NULL ? ((Engine->EngineData.StartLane > Engine->EngineData.EndLane) ? Engine->EngineData.EndLane : Engine->EngineData.StartLane) : 0)
+// Get highest PHY lane on engine
+#define PcieLibGetHiPhyLane(Engine) (Engine != NULL ? ((Engine->EngineData.StartLane > Engine->EngineData.EndLane) ? Engine->EngineData.StartLane : Engine->EngineData.EndLane) : 0)
+// Get number of lanes on wrapper
+#define PcieLibWrapperNumberOfLanes(Wrapper) (Wrapper != NULL ? ((UINT8)(Wrapper->EndPhyLane - Wrapper->StartPhyLane + 1)) : 0)
+// Check if virtual descriptor
+#define PcieLibIsVirtualDesciptor(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_VIRTUAL) != 0) : FALSE)
+// Check if it is allocated descriptor
+#define PcieLibIsEngineAllocated(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_ALLOCATED) != 0) : FALSE)
+// Check if it is last descriptor in list
+#define PcieLibIsLastDescriptor(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_TERMINATE_LIST) != 0) : TRUE)
+// Check if descriptor a PCIe engine
+#define PcieLibIsPcieEngine(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_PCIE_ENGINE) != 0) : FALSE)
+// Check if descriptor a DDI engine
+#define PcieLibIsDdiEngine(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_DDI_ENGINE) != 0) : FALSE)
+// Check if descriptor a DDI wrapper
+#define PcieLibIsDdiWrapper(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_DDI_WRAPPER) != 0) : FALSE)
+// Check if descriptor a PCIe wrapper
+#define PcieLibIsPcieWrapper(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_PCIE_WRAPPER) != 0) : FALSE)
+// Check if descriptor a PCIe wrapper
+#define PcieLibGetNextDescriptor(Descriptor) (Descriptor != NULL ? (((Descriptor->Header.DescriptorFlags & DESCRIPTOR_TERMINATE_LIST) != 0) ? NULL : (Descriptor+1)) : NULL)
+
+#define LANE_TYPE_PCIE_CORE_CONFIG 0x00000001ul
+#define LANE_TYPE_PCIE_CORE_ALLOC 0x00000002ul
+#define LANE_TYPE_PCIE_CORE_ACTIVE 0x00000004ul
+#define LANE_TYPE_PCIE_SB_CORE_CONFIG 0x00000008ul
+#define LANE_TYPE_PCIE_CORE_HOTPLUG 0x00000010ul
+#define LANE_TYPE_PCIE_CORE_ALLOC_ACTIVE 0x00000020ul
+#define LANE_TYPE_PCIE_PHY 0x00000100ul
+#define LANE_TYPE_PCIE_PHY_NATIVE 0x00000200ul
+#define LANE_TYPE_PCIE_PHY_NATIVE_ACTIVE 0x00000400ul
+#define LANE_TYPE_PCIE_PHY_NATIVE_HOTPLUG 0x00000800ul
+#define LANE_TYPE_PCIE_PHY_NATIVE_ALLOC_ACTIVE 0x00001000ul
+#define LANE_TYPE_DDI_PHY 0x00010000ul
+#define LANE_TYPE_DDI_PHY_NATIVE 0x00020000ul
+#define LANE_TYPE_DDI_PHY_NATIVE_ACTIVE 0x00040000ul
+#define LANE_TYPE_PHY_NATIVE_ALL 0x00100000ul
+#define LANE_TYPE_PCIE_PHY_NATIVE_MASTER_PLL 0x00200000ul
+#define LANE_TYPE_CORE_ALL LANE_TYPE_PHY_NATIVE_ALL
+#define LANE_TYPE_ALL LANE_TYPE_PHY_NATIVE_ALL
+
+#define LANE_TYPE_PCIE_LANES (LANE_TYPE_PCIE_CORE_ACTIVE | LANE_TYPE_PCIE_SB_CORE_CONFIG | \
+ LANE_TYPE_PCIE_CORE_HOTPLUG | LANE_TYPE_PCIE_CORE_ALLOC | \
+ LANE_TYPE_PCIE_PHY | LANE_TYPE_PCIE_PHY_NATIVE | \
+ LANE_TYPE_PCIE_PHY_NATIVE_ACTIVE | LANE_TYPE_PCIE_PHY_NATIVE_HOTPLUG | \
+ LANE_TYPE_PCIE_CORE_CONFIG | LANE_TYPE_PCIE_PHY_NATIVE_ALLOC_ACTIVE | \
+ LANE_TYPE_PCIE_CORE_ALLOC_ACTIVE)
+
+#define LANE_TYPE_DDI_LANES (LANE_TYPE_DDI_PHY | LANE_TYPE_DDI_PHY_NATIVE | LANE_TYPE_DDI_PHY_NATIVE_ACTIVE)
+
+
+#define INIT_STATUS_PCIE_PORT_GEN2_RECOVERY 0x00000001ull
+#define INIT_STATUS_PCIE_PORT_BROKEN_LANE_RECOVERY 0x00000002ull
+#define INIT_STATUS_PCIE_PORT_TRAINING_FAIL 0x00000004ull
+#define INIT_STATUS_PCIE_TRAINING_SUCCESS 0x00000008ull
+#define INIT_STATUS_PCIE_EP_NOT_PRESENT 0x00000010ull
+#define INIT_STATUS_PCIE_PORT_IN_COMPLIANCE 0x00000020ull
+#define INIT_STATUS_DDI_ACTIVE 0x00000040ull
+#define INIT_STATUS_ALLOCATED 0x00000080ull
+
+#define PCIE_PORT_GEN_CAP_BOOT 0x00000001ul
+#define PCIE_PORT_GEN_CAP_MAX 0x00000002ul
+#define PCIE_GLOBAL_GEN_CAP_ALL_PORTS 0x00000010ul
+#define PCIE_GLOBAL_GEN_CAP_TRAINED_PORTS 0x00000014ul
+#define PCIE_GLOBAL_GEN_CAP_HOTPLUG_PORTS 0x00000018ul
+
+#define PCIE_POWERGATING_SKIP_CORE 0x00000001ul
+#define PCIE_POWERGATING_SKIP_PHY 0x00000002ul
+
+/// PCIe Link Training State
+typedef enum {
+ PcieTrainingStandard, ///< Standard training algorithm. Training contained to AmdEarlyInit.
+ ///< PCIe device accessible after AmdEarlyInit complete
+ PcieTrainingDistributed, ///< Distribute training algorithm. Training distributed across AmdEarlyInit/AmdPostInit/AmdS3LateRestore
+ ///< PCIe device accessible after AmdPostInit complete.
+ ///< Algorithm potentially save up to 60ms in S3 resume time by skipping training empty slots.
+} PCIE_TRAINING_ALGORITHM;
+
+/// PCIe Link Training State
+typedef enum {
+ LinkStateResetAssert, ///< Assert port GPIO reset
+ LinkStateResetDuration, ///< Timeout for reset duration
+ LinkStateResetExit, ///< Deassert port GPIO reset
+ LinkTrainingResetTimeout, ///< Port GPIO reset timeout
+ LinkStateReleaseTraining, ///< Release link training
+ LinkStateDetectPresence, ///< Detect device presence
+ LinkStateDetecting, ///< Detect link training.
+ LinkStateBrokenLane, ///< Check and handle broken lane
+ LinkStateGen2Fail, ///< Check and handle device that fail training if GEN2 capability advertised
+ LinkStateL0, ///< Device trained to L0
+ LinkStateVcoNegotiation, ///< Check VCO negotiation complete
+ LinkStateRetrain, ///< Force retrain link.
+ LinkStateTrainingFail, ///< Link training fail
+ LinkStateTrainingSuccess, ///< Link training success
+ LinkStateGfxWorkaround, ///< GFX workaround
+ LinkStateCompliance, ///< Link in compliance mode
+ LinkStateDeviceNotPresent, ///< Link is not connected
+ LinkStateTrainingCompleted ///< Link training completed
+} PCIE_LINK_TRAINING_STATE;
+
+/// PCIe Port Visibility
+typedef enum {
+ UnhidePorts, ///< Command to unhide port
+ HidePorts, ///< Command to hide unused ports
+} PCIE_PORT_VISIBILITY;
+
+
+/// Table Register Entry
+typedef struct {
+ UINT16 Reg; ///< Address
+ UINT32 Mask; ///< Mask
+ UINT32 Data; ///< Data
+} PCIE_PORT_REGISTER_ENTRY;
+
+/// Table Register Entry
+typedef struct {
+ PCIE_PORT_REGISTER_ENTRY *Table; ///< Table
+ UINT32 Length; ///< Length
+} PCIE_PORT_REGISTER_TABLE_HEADER;
+
+/// Table Register Entry
+typedef struct {
+ UINT32 Reg; ///< Address
+ UINT32 Mask; ///< Mask
+ UINT32 Data; ///< Data
+} PCIE_HOST_REGISTER_ENTRY;
+
+/// Table Register Entry
+typedef struct {
+ PCIE_HOST_REGISTER_ENTRY *Table; ///< Table
+ UINT32 Length; ///< Length
+} PCIE_HOST_REGISTER_TABLE_HEADER;
+
+///Link ASPM info
+typedef struct {
+ PCI_ADDR DownstreamPort; ///< PCI address of downstream port
+ PCIE_ASPM_TYPE DownstreamAspm; ///< Downstream Device Aspm
+ PCI_ADDR UpstreamPort; ///< PCI address of upstream port
+ PCIE_ASPM_TYPE UpstreamAspm; ///< Upstream Device Capability
+ PCIE_ASPM_TYPE RequestedAspm; ///< Requested ASPM
+ BOOLEAN BlackList; ///< Blacklist device
+} PCIe_LINK_ASPM;
+
+///PCIe ASPM Latency Information
+typedef struct {
+ UINT8 MaxL0sExitLatency; ///< Max L0s exit latency in us
+ UINT8 MaxL1ExitLatency; ///< Max L1 exit latency in us
+} PCIe_ASPM_LATENCY_INFO;
+
+/// PCI address association
+typedef struct {
+ UINT8 NewDeviceAddress; ///< New PCI address (Device,Fucntion)
+ UINT8 NativeDeviceAddress; ///< Native PCI address (Device,Fucntion)
+} PCI_ADDR_LIST;
+
+/// The return status for GFX Card Workaround.
+typedef enum {
+ GFX_WORKAROUND_DEVICE_NOT_READY, ///< GFX Workaround device is not ready.
+ GFX_WORKAROUND_RESET_DEVICE, ///< GFX Workaround device need reset.
+ GFX_WORKAROUND_SUCCESS ///< The service completed normally.
+} GFX_WORKAROUND_STATUS;
+
+/// GFX workaround control
+typedef enum {
+ GfxWorkaroundDisable, ///< GFX Workaround disabled
+ GfxWorkaroundEnable ///< GFX Workaround enabled
+} GFX_WORKAROUND_CONTROL;
+
+/// PIF lane power state
+typedef enum {
+ PifPowerStateL0, ///<
+ PifPowerStateLS1, ///<
+ PifPowerStateLS2, ///<
+ PifPowerStateOff = 0x7, ///<
+} PCIE_PIF_POWER_STATE;
+
+/// PIF lane power control
+typedef enum {
+ PowerDownPifs, ///<
+ PowerUpPifs ///<
+} PCIE_PIF_POWER_CONTROL;
+
+///PLL rumup time
+typedef enum {
+ NormalRampup, ///<
+ LongRampup, ///<
+} PCIE_PLL_RAMPUP_TIME;
+
+typedef UINT16 PCIe_ENGINE_INIT_STATUS;
+
+/// PCIe port configuration info
+typedef struct {
+ PCIe_PORT_DATA PortData; ///< Port data
+ UINT8 StartCoreLane; ///< Start Core Lane
+ UINT8 EndCoreLane; ///< End Core lane
+ UINT8 NativeDevNumber :5; ///< Native PCI device number of the port
+ UINT8 NativeFunNumber :3; ///< Native PCI function number of the port
+ UINT8 CoreId :4; ///< PCIe core ID
+ UINT8 PortId :4; ///< Port ID on wrapper
+ PCI_ADDR Address; ///< PCI address of the port
+ UINT8 State; ///< Training state
+ UINT8 PcieBridgeId:4; ///< IOC PCIe bridge ID
+ UINT16 UnitId:12; ///< Port start unit ID
+ UINT16 NumberOfUnitId:4; ///< Def number of unitIDs assigned to port
+ UINT8 GfxWrkRetryCount:4; ///< Number of retry for GFX workaround
+ UINT32 TimeStamp; ///< Time stamp used to during training process
+ UINT8 LogicalBridgeId; ///< Logical Bridge ID
+} PCIe_PORT_CONFIG;
+
+///Descriptor header
+typedef struct {
+ UINT32 DescriptorFlags; ///< Descriptor flags
+ UINT16 Parent; ///< Offset of parent descriptor
+ UINT16 Peer; ///< Offset of the peer descriptor
+ UINT16 Child; ///< Offset of the list of child descriptors
+} PCIe_DESCRIPTOR_HEADER;
+
+/// DDI (Digital Display Interface) configuration info
+typedef struct {
+ PCIe_DDI_DATA DdiData; ///< DDI Data
+ UINT8 DisplayPriorityIndex; ///< Display priority index
+ UINT8 ConnectorId; ///< Connector id determined by enumeration
+ UINT8 DisplayDeviceId; ///< Display device id determined by enumeration
+} PCIe_DDI_CONFIG;
+
+
+/// Engine configuration data
+typedef struct {
+ PCIe_DESCRIPTOR_HEADER Header; ///< Descriptor header
+ PCIe_ENGINE_DATA EngineData; ///< Engine Data
+ PCIe_ENGINE_INIT_STATUS InitStatus; ///< Initialization Status
+ UINT8 Scratch; ///< Scratch pad
+ union {
+ PCIe_PORT_CONFIG Port; ///< PCIe port configuration data
+ PCIe_DDI_CONFIG Ddi; ///< DDI configuration data
+ } Type;
+} PCIe_ENGINE_CONFIG;
+
+/// Wrapper configuration data
+typedef struct {
+ PCIe_DESCRIPTOR_HEADER Header; ///< Descriptor Header
+ UINT8 WrapId; ///< Wrapper ID
+ UINT8 NumberOfPIFs; ///< Number of PIFs on wrapper
+ UINT8 StartPhyLane; ///< Start PHY Lane
+ UINT8 EndPhyLane; ///< End PHY Lane
+ UINT8 StartPcieCoreId:4; ///< Start PCIe Core ID
+ UINT8 EndPcieCoreId:4; ///< End PCIe Core ID
+ UINT8 NumberOfLanes; ///< Number of lanes
+ struct {
+ UINT8 PowerOffUnusedLanes:1; ///< Power Off unused lanes
+ UINT8 PowerOffUnusedPlls:1; ///< Power Off unused Plls
+ UINT8 ClkGating:1; ///< TXCLK gating
+ UINT8 LclkGating:1; ///< LCLK gating
+ UINT8 TxclkGatingPllPowerDown:1; ///< TXCLK clock gating PLL power down
+ UINT8 PllOffInL1:1; ///< PLL off in L1
+ UINT8 AccessEncoding:1; ///< Reg access encoding
+ } Features;
+ UINT8 MasterPll; ///< Bitmap of master PLL
+} PCIe_WRAPPER_CONFIG;
+
+
+/// Silicon configuration data
+typedef struct {
+ PCIe_DESCRIPTOR_HEADER Header; ///< Descriptor Header
+ UINT8 SiliconId; ///< Gnb silicon(module) ID
+ UINT8 NodeId; ///< Node to which GNB connected
+ UINT8 LinkId; ///< Link to which GNB connected if LinkId > 3 GNB connected to sublink = LinkId - 4
+ PCI_ADDR Address; ///< PCI address of GNB host bridge
+} PCIe_SILICON_CONFIG;
+
+typedef PCIe_SILICON_CONFIG GNB_HANDLE;
+
+/// Complex configuration data
+typedef struct {
+ PCIe_DESCRIPTOR_HEADER Header; ///< Descriptor Header
+ UINT8 SocketId; ///< Processor socket ID
+} PCIe_COMPLEX_CONFIG;
+
+/// PCIe platform configuration info
+typedef struct {
+ PCIe_DESCRIPTOR_HEADER Header; ///< Descriptor Header
+ PVOID StdHeader; ///< Standard configuration header
+ UINT32 LinkReceiverDetectionPooling; ///< Receiver pooling detection time in us.
+ UINT32 LinkL0Pooling; ///< Pooling for link to get to L0 in us
+ UINT32 LinkGpioResetAssertionTime; ///< Gpio reset assertion time in us
+ UINT32 LinkResetToTrainingTime; ///< Time duration between deassert GPIO reset and release training in us ///
+ UINT8 GfxCardWorkaround; ///< GFX Card Workaround
+ UINT8 PsppPolicy; ///< PSPP policy
+ UINT8 TrainingExitState; ///< State at which training should exit (see PCIE_LINK_TRAINING_STATE)
+ UINT8 TrainingAlgorithm; ///< Training algorithm (see PCIE_TRAINING_ALGORITHM)
+ PCIe_COMPLEX_CONFIG ComplexList[MAX_NUMBER_OF_COMPLEXES]; ///< Complex
+} PCIe_PLATFORM_CONFIG;
+
+/// PCIe Engine Description
+typedef struct {
+ UINT32 Flags; /**< Descriptor flags
+ * @li @b Bit31 - last descriptor on wrapper
+ * @li @b Bit30 - Descriptor allocated for PCIe port or DDI
+ */
+ PCIe_ENGINE_DATA EngineData; ///< Engine Data
+} PCIe_ENGINE_DESCRIPTOR;
+
+/// PCIe Lane allocation descriptor
+typedef struct {
+ UINT32 Flags; ///< Flags
+ UINT8 WrapId; ///< Wrapper ID
+ UINT8 EngineType; ///< Engine Type
+ UINT8 NumberOfEngines; ///< Number of engines to configure
+ UINT8 NumberOfConfigurations; ///< Number of possible configurations
+ UINT8 *ConfigTable; ///< Pointer to config table
+} PCIe_LANE_ALLOC_DESCRIPTOR;
+
+/// Lane Control
+typedef enum {
+ EnableLanes, ///< Enable Lanes
+ DisableLanes ///< Disable Lanes
+} LANE_CONTROL;
+
+#pragma pack (pop)
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbPcieFamServices.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbPcieFamServices.h
new file mode 100644
index 0000000..6ec6399
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbPcieFamServices.h
@@ -0,0 +1,242 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe family specific services.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBPCIEFAMSERVICES_H_
+#define _GNBPCIEFAMSERVICES_H_
+
+#include "Gnb.h"
+#include "GnbPcie.h"
+
+AGESA_STATUS
+PcieFmGetComplexDataLength (
+ IN UINT8 SocketId,
+ OUT UINTN *Length,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef AGESA_STATUS F_PCIEFMGETCOMPLEXDATALENGTH (
+ IN UINT8 SocketId,
+ OUT UINTN *Length,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+PcieFmBuildComplexConfiguration (
+ IN UINT8 SocketId,
+ OUT VOID *Buffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef AGESA_STATUS F_PCIEFMBUILDCOMPLEXCONFIGURATION (
+ IN UINT8 SocketId,
+ OUT VOID *Buffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+PcieFmConfigureEnginesLaneAllocation (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIE_ENGINE_TYPE EngineType,
+ IN UINT8 ConfigurationId
+ );
+
+typedef AGESA_STATUS F_PCIEFMCONFIGUREENGINESLANEALLOCATION (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIE_ENGINE_TYPE EngineType,
+ IN UINT8 ConfigurationId
+ );
+
+AGESA_STATUS
+PcieFmGetCoreConfigurationValue (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT8 CoreId,
+ IN UINT64 ConfigurationSignature,
+ IN UINT8 *ConfigurationValue
+ );
+
+typedef AGESA_STATUS F_PCIEFMGETCORECONFIGURATIONVALUE (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT8 CoreId,
+ IN UINT64 ConfigurationSignature,
+ IN UINT8 *ConfigurationValue
+ );
+
+BOOLEAN
+PcieFmCheckPortPciDeviceMapping (
+ IN PCIe_PORT_DESCRIPTOR *PortDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+typedef BOOLEAN F_PCIEFMCHECKPORTPCIDEVICEMAPPING (
+ IN PCIe_PORT_DESCRIPTOR *PortDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+AGESA_STATUS
+PcieFmMapPortPciAddress (
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+typedef AGESA_STATUS F_PCIEFMMAPPORTPCIADDRESS (
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+BOOLEAN
+PcieFmCheckPortPcieLaneCanBeMuxed (
+ IN PCIe_PORT_DESCRIPTOR *PortDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+typedef BOOLEAN F_PCIEFMCHECKPORTPCIELANECANBEMUXED (
+ IN PCIe_PORT_DESCRIPTOR *PortDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+CONST CHAR8*
+PcieFmDebugGetCoreConfigurationString (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT8 ConfigurationValue
+ );
+
+typedef CONST CHAR8* F_PCIEFMDEBUGGETCORECONFIGURATIONSTRING (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT8 ConfigurationValue
+ );
+
+CONST CHAR8*
+PcieFmDebugGetWrapperNameString (
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ );
+
+typedef CONST CHAR8* F_PCIEFMDEBUGGETWRAPPERNAMESTRING (
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ );
+
+CONST CHAR8*
+PcieFmDebugGetHostRegAddressSpaceString (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN UINT16 AddressFrame
+ );
+
+typedef CONST CHAR8* F_PCIEFMDEBUGGETHOSTREGADDRESSSPACESTRING (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN UINT16 AddressFrame
+ );
+
+PCIE_LINK_SPEED_CAP
+PcieFmGetLinkSpeedCap (
+ IN UINT32 Flags,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+typedef PCIE_LINK_SPEED_CAP F_PCIEFMGETLINKSPEEDCAP (
+ IN UINT32 Flags,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+VOID
+PcieFmSetLinkSpeedCap (
+ IN PCIE_LINK_SPEED_CAP LinkSpeedCapability,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+typedef VOID F_PCIEFMSETLINKSPEEDCAP (
+ IN PCIE_LINK_SPEED_CAP LinkSpeedCapability,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+UINT32
+PcieFmGetNativePhyLaneBitmap (
+ IN UINT32 PhyLaneBitmap,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+typedef UINT32 F_PCIEFMGETNATIVEPHYLANEBITMAP (
+ IN UINT32 PhyLaneBitmap,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+AGESA_STATUS
+PcieFmGetSbConfigInfo (
+ IN UINT8 SocketId,
+ OUT PCIe_PORT_DESCRIPTOR *SbPort,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+typedef AGESA_STATUS F_PCIEFMGETSBCONFIGINFO (
+ IN UINT8 SocketId,
+ OUT PCIe_PORT_DESCRIPTOR *SbPort,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+/// PCIe config services
+typedef struct {
+ F_PCIEFMGETCOMPLEXDATALENGTH *PcieFmGetComplexDataLength; ///< PcieFmGetComplexDataLength
+ F_PCIEFMBUILDCOMPLEXCONFIGURATION *PcieFmBuildComplexConfiguration; ///< PcieFmBuildComplexConfiguration
+ F_PCIEFMCONFIGUREENGINESLANEALLOCATION *PcieFmConfigureEnginesLaneAllocation; ///< PcieFmConfigureEnginesLaneAllocation
+ F_PCIEFMCHECKPORTPCIDEVICEMAPPING *PcieFmCheckPortPciDeviceMapping; ///< PcieFmCheckPortPciDeviceMapping
+ F_PCIEFMMAPPORTPCIADDRESS *PcieFmMapPortPciAddress; ///< PcieFmMapPortPciAddress
+ F_PCIEFMCHECKPORTPCIELANECANBEMUXED *PcieFmCheckPortPcieLaneCanBeMuxed; ///< PcieFmCheckPortPcieLaneCanBeMuxed
+ F_PCIEFMGETSBCONFIGINFO *PcieFmGetSbConfigInfo; ///< PcieFmGetSbConfigInfo
+} PCIe_FAM_CONFIG_SERVICES;
+
+/// PCIe init services
+typedef struct {
+ F_PCIEFMGETCORECONFIGURATIONVALUE *PcieFmGetCoreConfigurationValue; ///< PcieFmGetCoreConfigurationValue
+ F_PCIEFMGETLINKSPEEDCAP *PcieFmGetLinkSpeedCap; ///< PcieFmGetLinkSpeedCap
+ F_PCIEFMGETNATIVEPHYLANEBITMAP *PcieFmGetNativePhyLaneBitmap; ///< PcieFmGetNativePhyLaneBitmap
+ F_PCIEFMSETLINKSPEEDCAP *PcieFmSetLinkSpeedCap; ///< PcieFmSetLinkSpeedCap
+} PCIe_FAM_INIT_SERVICES;
+
+///PCIe debug services
+typedef struct {
+ F_PCIEFMDEBUGGETHOSTREGADDRESSSPACESTRING *PcieFmDebugGetHostRegAddressSpaceString; ///< PcieFmGetCoreConfigurationValue
+ F_PCIEFMDEBUGGETWRAPPERNAMESTRING *PcieFmDebugGetWrapperNameString; ///< PcieFmDebugGetWrapperNameString
+ F_PCIEFMDEBUGGETCORECONFIGURATIONSTRING *PcieFmDebugGetCoreConfigurationString; ///< PcieFmDebugGetCoreConfigurationString
+} PCIe_FAM_DEBUG_SERVICES;
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbRegistersCommon.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbRegistersCommon.h
new file mode 100644
index 0000000..b67058f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbRegistersCommon.h
@@ -0,0 +1,1557 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Register definitions
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBREGISTERSCOMMON_H_
+#define _GNBREGISTERSCOMMON_H_
+
+
+#define TYPE_D0F0 0x1
+#define TYPE_D0F0x64 0x2
+#define TYPE_D0F0x98 0x3
+#define TYPE_D0F0xE4 0x5
+#define TYPE_DxF0 0x6
+#define TYPE_DxF0xE4 0x7
+#define TYPE_D18F1 0xb
+#define TYPE_D18F2 0xc
+#define TYPE_D18F3 0xd
+#define TYPE_MSR 0x10
+#define TYPE_D1F0 0x11
+#define D18F2x9C 0xe
+#ifndef WRAP_SPACE
+ #define WRAP_SPACE(w, x) (0x01300000 | (w << 16) | (x))
+#endif
+#ifndef CORE_SPACE
+ #define CORE_SPACE(c, x) (0x00010000 | (c << 24) | (x))
+#endif
+#ifndef PHY_SPACE
+ #define PHY_SPACE(w, p, x) (0x00200000 | ((p + 1) << 24) | (w << 16) | (x))
+#endif
+#ifndef PIF_SPACE
+ #define PIF_SPACE(w, p, x) (0x00100000 | ((p + 1) << 24) | (w << 16) | (x))
+#endif
+// **** D0F0x00 Register Definition ****
+// Address
+#define D0F0x00_ADDRESS 0x0
+
+// Type
+#define D0F0x00_TYPE TYPE_D0F0
+// Field Data
+#define D0F0x00_VendorID_OFFSET 0
+#define D0F0x00_VendorID_WIDTH 16
+#define D0F0x00_VendorID_MASK 0xffff
+#define D0F0x00_DeviceID_OFFSET 16
+#define D0F0x00_DeviceID_WIDTH 16
+#define D0F0x00_DeviceID_MASK 0xffff0000
+
+/// D0F0x00
+typedef union {
+ struct { ///<
+ UINT32 VendorID:16; ///<
+ UINT32 DeviceID:16; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x00_STRUCT;
+
+// **** D0F0x04 Register Definition ****
+// Address
+#define D0F0x04_ADDRESS 0x4
+
+// Type
+#define D0F0x04_TYPE TYPE_D0F0
+// Field Data
+#define D0F0x04_IoAccessEn_OFFSET 0
+#define D0F0x04_IoAccessEn_WIDTH 1
+#define D0F0x04_IoAccessEn_MASK 0x1
+#define D0F0x04_MemAccessEn_OFFSET 1
+#define D0F0x04_MemAccessEn_WIDTH 1
+#define D0F0x04_MemAccessEn_MASK 0x2
+#define D0F0x04_BusMasterEn_OFFSET 2
+#define D0F0x04_BusMasterEn_WIDTH 1
+#define D0F0x04_BusMasterEn_MASK 0x4
+#define D0F0x04_Reserved_7_7_OFFSET 7
+#define D0F0x04_Reserved_7_7_WIDTH 1
+#define D0F0x04_Reserved_7_7_MASK 0x80
+#define D0F0x04_Reserved_19_10_OFFSET 10
+#define D0F0x04_Reserved_19_10_WIDTH 10
+#define D0F0x04_Reserved_19_10_MASK 0xffc00
+#define D0F0x04_CapList_OFFSET 20
+#define D0F0x04_CapList_WIDTH 1
+#define D0F0x04_CapList_MASK 0x100000
+
+/// D0F0x04
+typedef union {
+ struct { ///<
+ UINT32 IoAccessEn:1 ; ///<
+ UINT32 MemAccessEn:1 ; ///<
+ UINT32 BusMasterEn:1 ; ///<
+ UINT32 Reserved_3_3:1 ; ///<
+ UINT32 Reserved_4_4:1 ; ///<
+ UINT32 Reserved_5_5:1 ; ///<
+ UINT32 Reserved_6_6:1 ; ///<
+ UINT32 Reserved_7_7:1 ; ///<
+ UINT32 Reserved_8_8:1 ; ///<
+ UINT32 Reserved_9_9:1 ; ///<
+ UINT32 Reserved_19_10:10; ///<
+ UINT32 CapList:1 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x04_STRUCT;
+
+// **** D0F0x60 Register Definition ****
+// Address
+#define D0F0x60_ADDRESS 0x60
+
+
+// **** D0F0x64 Register Definition ****
+// Address
+#define D0F0x64_ADDRESS 0x64
+
+// Type
+#define D0F0x64_TYPE TYPE_D0F0
+// Field Data
+#define D0F0x64_MiscIndData_OFFSET 0
+#define D0F0x64_MiscIndData_WIDTH 32
+#define D0F0x64_MiscIndData_MASK 0xffffffff
+
+/// D0F0x64
+typedef union {
+ struct { ///<
+ UINT32 MiscIndData:32; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x64_STRUCT;
+
+
+
+// **** D0F0x90 Register Definition ****
+// Address
+#define D0F0x90_ADDRESS 0x90
+
+// Type
+#define D0F0x90_TYPE TYPE_D0F0
+// Field Data
+#define D0F0x90_Reserved_22_0_OFFSET 0
+#define D0F0x90_Reserved_22_0_WIDTH 23
+#define D0F0x90_Reserved_22_0_MASK 0x7fffff
+#define D0F0x90_TopOfDram_OFFSET 23
+#define D0F0x90_TopOfDram_WIDTH 9
+#define D0F0x90_TopOfDram_MASK 0xff800000
+
+/// D0F0x90
+typedef union {
+ struct { ///<
+ UINT32 Reserved_22_0:23; ///<
+ UINT32 TopOfDram:9 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x90_STRUCT;
+
+// **** D0F0x94 Register Definition ****
+// Address
+#define D0F0x94_ADDRESS 0x94
+
+// Type
+#define D0F0x94_TYPE TYPE_D0F0
+// Field Data
+#define D0F0x94_OrbIndAddr_OFFSET 0
+#define D0F0x94_OrbIndAddr_WIDTH 7
+#define D0F0x94_OrbIndAddr_MASK 0x7f
+#define D0F0x94_Reserved_7_7_OFFSET 7
+#define D0F0x94_Reserved_7_7_WIDTH 1
+#define D0F0x94_Reserved_7_7_MASK 0x80
+#define D0F0x94_Reserved_31_9_OFFSET 9
+#define D0F0x94_Reserved_31_9_WIDTH 23
+#define D0F0x94_Reserved_31_9_MASK 0xfffffe00
+
+/// D0F0x94
+typedef union {
+ struct { ///<
+ UINT32 OrbIndAddr:7 ; ///<
+ UINT32 Reserved_7_7:1 ; ///<
+ UINT32 Reserved_8_8:1 ; ///<
+ UINT32 Reserved_31_9:23; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x94_STRUCT;
+
+
+// **** D0F0xE0 Register Definition ****
+// Address
+#define D0F0xE0_ADDRESS 0xe0
+
+// Type
+#define D0F0xE0_TYPE TYPE_D0F0
+// Field Data
+#define D0F0xE0_PcieIndxAddr_OFFSET 0
+#define D0F0xE0_PcieIndxAddr_WIDTH 16
+#define D0F0xE0_PcieIndxAddr_MASK 0xffff
+#define D0F0xE0_FrameType_OFFSET 16
+#define D0F0xE0_FrameType_WIDTH 8
+#define D0F0xE0_FrameType_MASK 0xff0000
+#define D0F0xE0_BlockSelect_OFFSET 24
+#define D0F0xE0_BlockSelect_WIDTH 8
+#define D0F0xE0_BlockSelect_MASK 0xff000000
+
+/// D0F0xE0
+typedef union {
+ struct { ///<
+ UINT32 PcieIndxAddr:16; ///<
+ UINT32 FrameType:8 ; ///<
+ UINT32 BlockSelect:8 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE0_STRUCT;
+
+
+// **** D18F3x15C Register Definition ****
+// Address
+#define D18F3x15C_ADDRESS 0x15c
+
+// Type
+#define D18F3x15C_TYPE TYPE_D18F3
+// Field Data
+#define D18F3x15C_SclkVidLevel0_OFFSET 0
+#define D18F3x15C_SclkVidLevel0_WIDTH 7
+#define D18F3x15C_SclkVidLevel0_MASK 0x7f
+#define D18F3x15C_Reserved_7_7_OFFSET 7
+#define D18F3x15C_Reserved_7_7_WIDTH 1
+#define D18F3x15C_Reserved_7_7_MASK 0x80
+#define D18F3x15C_SclkVidLevel1_OFFSET 8
+#define D18F3x15C_SclkVidLevel1_WIDTH 7
+#define D18F3x15C_SclkVidLevel1_MASK 0x7f00
+#define D18F3x15C_Reserved_15_15_OFFSET 15
+#define D18F3x15C_Reserved_15_15_WIDTH 1
+#define D18F3x15C_Reserved_15_15_MASK 0x8000
+#define D18F3x15C_SclkVidLevel2_OFFSET 16
+#define D18F3x15C_SclkVidLevel2_WIDTH 7
+#define D18F3x15C_SclkVidLevel2_MASK 0x7f0000
+#define D18F3x15C_Reserved_23_23_OFFSET 23
+#define D18F3x15C_Reserved_23_23_WIDTH 1
+#define D18F3x15C_Reserved_23_23_MASK 0x800000
+#define D18F3x15C_SclkVidLevel3_OFFSET 24
+#define D18F3x15C_SclkVidLevel3_WIDTH 7
+#define D18F3x15C_SclkVidLevel3_MASK 0x7f000000
+#define D18F3x15C_Reserved_31_31_OFFSET 31
+#define D18F3x15C_Reserved_31_31_WIDTH 1
+#define D18F3x15C_Reserved_31_31_MASK 0x80000000
+
+/// D18F3x15C
+typedef union {
+ struct { ///<
+ UINT32 SclkVidLevel0:7 ; ///<
+ UINT32 Reserved_7_7:1 ; ///<
+ UINT32 SclkVidLevel1:7 ; ///<
+ UINT32 Reserved_15_15:1 ; ///<
+ UINT32 SclkVidLevel2:7 ; ///<
+ UINT32 Reserved_23_23:1 ; ///<
+ UINT32 SclkVidLevel3:7 ; ///<
+ UINT32 Reserved_31_31:1 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D18F3x15C_STRUCT;
+
+// **** D18F3x17C Register Definition ****
+
+
+
+// **** DxF0x18 Register Definition ****
+// Address
+#define DxF0x18_ADDRESS 0x18
+
+// Type
+#define DxF0x18_TYPE TYPE_D4F0
+// **** DxF0x58 Register Definition ****
+// Address
+
+
+
+
+// **** D0F0x64_x0C Register Definition ****
+// Address
+#define D0F0x64_x0C_ADDRESS 0xc
+
+// Type
+#define D0F0x64_x0C_TYPE TYPE_D0F0x64
+
+/// D0F0x64_x0C
+typedef union {
+ UINT32 Value; ///<
+} D0F0x64_x0C_STRUCT;
+
+// **** D0F0x64_x19 Register Definition ****
+// Address
+#define D0F0x64_x19_ADDRESS 0x19
+
+// Type
+#define D0F0x64_x19_TYPE TYPE_D0F0x64
+// Field Data
+#define D0F0x64_x19_TomEn_OFFSET 0
+#define D0F0x64_x19_TomEn_WIDTH 1
+#define D0F0x64_x19_TomEn_MASK 0x1
+#define D0F0x64_x19_Reserved_22_1_OFFSET 1
+#define D0F0x64_x19_Reserved_22_1_WIDTH 22
+#define D0F0x64_x19_Reserved_22_1_MASK 0x7ffffe
+#define D0F0x64_x19_Tom2_31_23__OFFSET 23
+#define D0F0x64_x19_Tom2_31_23__WIDTH 9
+#define D0F0x64_x19_Tom2_31_23__MASK 0xff800000
+
+/// D0F0x64_x19
+typedef union {
+ struct { ///<
+ UINT32 TomEn:1 ; ///<
+ UINT32 Reserved_22_1:22; ///<
+ UINT32 Tom2_31_23_:9 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x64_x19_STRUCT;
+
+// **** D0F0x64_x1A Register Definition ****
+// Address
+#define D0F0x64_x1A_ADDRESS 0x1a
+
+// Type
+#define D0F0x64_x1A_TYPE TYPE_D0F0x64
+// Field Data
+#define D0F0x64_x1A_Tom2_39_32__OFFSET 0
+#define D0F0x64_x1A_Tom2_39_32__WIDTH 8
+#define D0F0x64_x1A_Tom2_39_32__MASK 0xff
+#define D0F0x64_x1A_Reserved_31_8_OFFSET 8
+#define D0F0x64_x1A_Reserved_31_8_WIDTH 24
+#define D0F0x64_x1A_Reserved_31_8_MASK 0xffffff00
+
+/// D0F0x64_x1A
+typedef union {
+ struct { ///<
+ UINT32 Tom2_39_32_:8 ; ///<
+ UINT32 Reserved_31_8:24; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x64_x1A_STRUCT;
+
+// **** D0F0x64_x1D Register Definition ****
+// Address
+#define D0F0x64_x1D_ADDRESS 0x1d
+
+// Type
+#define D0F0x64_x1D_TYPE TYPE_D0F0x64
+// Field Data
+#define D0F0x64_x1D_VgaEn_OFFSET 1
+#define D0F0x64_x1D_VgaEn_WIDTH 1
+#define D0F0x64_x1D_VgaEn_MASK 0x2
+#define D0F0x64_x1D_Reserved_2_2_OFFSET 2
+#define D0F0x64_x1D_Reserved_2_2_WIDTH 1
+#define D0F0x64_x1D_Reserved_2_2_MASK 0x4
+#define D0F0x64_x1D_Vga16En_OFFSET 3
+#define D0F0x64_x1D_Vga16En_WIDTH 1
+#define D0F0x64_x1D_Vga16En_MASK 0x8
+#define D0F0x64_x1D_Reserved_31_4_OFFSET 4
+#define D0F0x64_x1D_Reserved_31_4_WIDTH 28
+#define D0F0x64_x1D_Reserved_31_4_MASK 0xfffffff0
+
+/// D0F0x64_x1D
+typedef union {
+ struct { ///<
+ UINT32 Reserved_1_1:1 ; ///<
+ UINT32 VgaEn:1 ; ///<
+ UINT32 Reserved_2_2:1 ; ///<
+ UINT32 Vga16En:1 ; ///<
+ UINT32 Reserved_31_4:28; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x64_x1D_STRUCT;
+
+
+// **** D0F0x64_x6A Register Definition ****
+// Address
+#define D0F0x64_x6A_ADDRESS 0x6a
+
+// Type
+#define D0F0x64_x6A_TYPE TYPE_D0F0x64
+// Field Data
+#define D0F0x64_x6A_VoltageForceEn_OFFSET 0
+#define D0F0x64_x6A_VoltageForceEn_WIDTH 1
+#define D0F0x64_x6A_VoltageForceEn_MASK 0x1
+#define D0F0x64_x6A_VoltageChangeEn_OFFSET 1
+#define D0F0x64_x6A_VoltageChangeEn_WIDTH 1
+#define D0F0x64_x6A_VoltageChangeEn_MASK 0x2
+#define D0F0x64_x6A_VoltageChangeReq_OFFSET 2
+#define D0F0x64_x6A_VoltageChangeReq_WIDTH 1
+#define D0F0x64_x6A_VoltageChangeReq_MASK 0x4
+#define D0F0x64_x6A_VoltageLevel_OFFSET 3
+#define D0F0x64_x6A_VoltageLevel_WIDTH 2
+#define D0F0x64_x6A_VoltageLevel_MASK 0x18
+#define D0F0x64_x6A_Reserved_31_5_OFFSET 5
+#define D0F0x64_x6A_Reserved_31_5_WIDTH 27
+#define D0F0x64_x6A_Reserved_31_5_MASK 0xffffffe0
+
+/// D0F0x64_x6A
+typedef union {
+ struct { ///<
+ UINT32 VoltageForceEn:1 ; ///<
+ UINT32 VoltageChangeEn:1 ; ///<
+ UINT32 VoltageChangeReq:1 ; ///<
+ UINT32 VoltageLevel:2 ; ///<
+ UINT32 Reserved_31_5:27; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x64_x6A_STRUCT;
+
+// **** D0F0x64_x6B Register Definition ****
+// Address
+#define D0F0x64_x6B_ADDRESS 0x6b
+
+// Type
+#define D0F0x64_x6B_TYPE TYPE_D0F0x64
+// Field Data
+#define D0F0x64_x6B_VoltageChangeAck_OFFSET 0
+#define D0F0x64_x6B_VoltageChangeAck_WIDTH 1
+#define D0F0x64_x6B_VoltageChangeAck_MASK 0x1
+#define D0F0x64_x6B_CurrentVoltageLevel_OFFSET 1
+#define D0F0x64_x6B_CurrentVoltageLevel_WIDTH 2
+#define D0F0x64_x6B_CurrentVoltageLevel_MASK 0x6
+#define D0F0x64_x6B_Reserved_31_3_OFFSET 3
+#define D0F0x64_x6B_Reserved_31_3_WIDTH 29
+#define D0F0x64_x6B_Reserved_31_3_MASK 0xfffffff8
+
+/// D0F0x64_x6B
+typedef union {
+ struct { ///<
+ UINT32 VoltageChangeAck:1 ; ///<
+ UINT32 CurrentVoltageLevel:2 ; ///<
+ UINT32 Reserved_31_3:29; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x64_x6B_STRUCT;
+
+// **** D0F0x98_x06 Register Definition ****
+// Address
+#define D0F0x98_x06_ADDRESS 0x6
+
+// Type
+#define D0F0x98_x06_TYPE TYPE_D0F0x98
+// Field Data
+#define D0F0x98_x06_Reserved_25_0_OFFSET 0
+#define D0F0x98_x06_Reserved_25_0_WIDTH 26
+#define D0F0x98_x06_Reserved_25_0_MASK 0x3ffffff
+#define D0F0x98_x06_UmiNpMemWrEn_OFFSET 26
+#define D0F0x98_x06_UmiNpMemWrEn_WIDTH 1
+#define D0F0x98_x06_UmiNpMemWrEn_MASK 0x4000000
+#define D0F0x98_x06_Reserved_31_27_OFFSET 27
+#define D0F0x98_x06_Reserved_31_27_WIDTH 5
+#define D0F0x98_x06_Reserved_31_27_MASK 0xf8000000
+
+/// D0F0x98_x06
+typedef union {
+ struct { ///<
+ UINT32 Reserved_25_0:26; ///<
+ UINT32 UmiNpMemWrEn:1 ; ///<
+ UINT32 Reserved_31_27:5 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x98_x06_STRUCT;
+
+
+// **** D0F0x98_x2C Register Definition ****
+// Address
+#define D0F0x98_x2C_ADDRESS 0x2c
+
+// Type
+#define D0F0x98_x2C_TYPE TYPE_D0F0x98
+// Field Data
+#define D0F0x98_x2C_Reserved_0_0_OFFSET 0
+#define D0F0x98_x2C_Reserved_0_0_WIDTH 1
+#define D0F0x98_x2C_Reserved_0_0_MASK 0x1
+#define D0F0x98_x2C_DynWakeEn_OFFSET 1
+#define D0F0x98_x2C_DynWakeEn_WIDTH 1
+#define D0F0x98_x2C_DynWakeEn_MASK 0x2
+#define D0F0x98_x2C_Reserved_15_2_OFFSET 2
+#define D0F0x98_x2C_Reserved_15_2_WIDTH 14
+#define D0F0x98_x2C_Reserved_15_2_MASK 0xfffc
+#define D0F0x98_x2C_WakeHysteresis_OFFSET 16
+#define D0F0x98_x2C_WakeHysteresis_WIDTH 16
+#define D0F0x98_x2C_WakeHysteresis_MASK 0xffff0000
+
+/// D0F0x98_x2C
+typedef union {
+ struct { ///<
+ UINT32 Reserved_0_0:1 ; ///<
+ UINT32 DynWakeEn:1 ; ///<
+ UINT32 Reserved_15_2:14; ///<
+ UINT32 WakeHysteresis:16; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x98_x2C_STRUCT;
+
+// **** D0F0x98_x3A Register Definition ****
+// Address
+#define D0F0x98_x3A_ADDRESS 0x3a
+
+// Type
+
+
+// **** D0F0xE4_WRAP_0080 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_0080_ADDRESS 0x80
+
+// Type
+#define D0F0xE4_WRAP_0080_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_0080_StrapBifLinkConfig_OFFSET 0
+#define D0F0xE4_WRAP_0080_StrapBifLinkConfig_WIDTH 4
+#define D0F0xE4_WRAP_0080_StrapBifLinkConfig_MASK 0xf
+#define D0F0xE4_WRAP_0080_Reserved_31_4_OFFSET 4
+#define D0F0xE4_WRAP_0080_Reserved_31_4_WIDTH 28
+#define D0F0xE4_WRAP_0080_Reserved_31_4_MASK 0xfffffff0
+
+/// D0F0xE4_WRAP_0080
+typedef union {
+ struct { ///<
+ UINT32 StrapBifLinkConfig:4 ; ///<
+ UINT32 Reserved_31_4:28; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_0080_STRUCT;
+
+// **** D0F0xE4_WRAP_0800 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_0800_ADDRESS 0x800
+
+// Type
+#define D0F0xE4_WRAP_0800_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_0800_HoldTraining_OFFSET 0
+#define D0F0xE4_WRAP_0800_HoldTraining_WIDTH 1
+#define D0F0xE4_WRAP_0800_HoldTraining_MASK 0x1
+#define D0F0xE4_WRAP_0800_Reserved_31_1_OFFSET 1
+#define D0F0xE4_WRAP_0800_Reserved_31_1_WIDTH 31
+#define D0F0xE4_WRAP_0800_Reserved_31_1_MASK 0xfffffffe
+
+/// D0F0xE4_WRAP_0800
+typedef union {
+ struct { ///<
+ UINT32 HoldTraining:1 ; ///<
+ UINT32 Reserved_31_1:31; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_0800_STRUCT;
+
+// **** D0F0xE4_WRAP_0803 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_0803_ADDRESS 0x803
+
+// Type
+#define D0F0xE4_WRAP_0803_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_0803_Reserved_4_0_OFFSET 0
+#define D0F0xE4_WRAP_0803_Reserved_4_0_WIDTH 5
+#define D0F0xE4_WRAP_0803_Reserved_4_0_MASK 0x1f
+#define D0F0xE4_WRAP_0803_StrapBifDeemphasisSel_OFFSET 5
+#define D0F0xE4_WRAP_0803_StrapBifDeemphasisSel_WIDTH 1
+#define D0F0xE4_WRAP_0803_StrapBifDeemphasisSel_MASK 0x20
+#define D0F0xE4_WRAP_0803_Reserved_31_6_OFFSET 6
+#define D0F0xE4_WRAP_0803_Reserved_31_6_WIDTH 26
+#define D0F0xE4_WRAP_0803_Reserved_31_6_MASK 0xffffffc0
+
+/// D0F0xE4_WRAP_0803
+typedef union {
+ struct { ///<
+ UINT32 Reserved_4_0:5 ; ///<
+ UINT32 StrapBifDeemphasisSel:1 ; ///<
+ UINT32 Reserved_31_6:26; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_0803_STRUCT;
+
+// **** D0F0xE4_WRAP_0903 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_0903_ADDRESS 0x903
+
+// Type
+#define D0F0xE4_WRAP_0903_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_0903_Reserved_4_0_OFFSET 0
+#define D0F0xE4_WRAP_0903_Reserved_4_0_WIDTH 5
+#define D0F0xE4_WRAP_0903_Reserved_4_0_MASK 0x1f
+#define D0F0xE4_WRAP_0903_StrapBifDeemphasisSel_OFFSET 5
+#define D0F0xE4_WRAP_0903_StrapBifDeemphasisSel_WIDTH 1
+#define D0F0xE4_WRAP_0903_StrapBifDeemphasisSel_MASK 0x20
+#define D0F0xE4_WRAP_0903_Reserved_31_6_OFFSET 6
+#define D0F0xE4_WRAP_0903_Reserved_31_6_WIDTH 26
+#define D0F0xE4_WRAP_0903_Reserved_31_6_MASK 0xffffffc0
+
+/// D0F0xE4_WRAP_0903
+typedef union {
+ struct { ///<
+ UINT32 Reserved_4_0:5 ; ///<
+ UINT32 StrapBifDeemphasisSel:1 ; ///<
+ UINT32 Reserved_31_6:26; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_0903_STRUCT;
+
+
+// **** D0F0xE4_WRAP_8011 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8011_ADDRESS 0x8011
+
+// Type
+#define D0F0xE4_WRAP_8011_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_8011_TxclkDynGateLatency_OFFSET 0
+#define D0F0xE4_WRAP_8011_TxclkDynGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8011_TxclkDynGateLatency_MASK 0x3f
+#define D0F0xE4_WRAP_8011_TxclkPermGateEven_OFFSET 6
+#define D0F0xE4_WRAP_8011_TxclkPermGateEven_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkPermGateEven_MASK 0x40
+#define D0F0xE4_WRAP_8011_TxclkDynGateEnable_OFFSET 7
+#define D0F0xE4_WRAP_8011_TxclkDynGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkDynGateEnable_MASK 0x80
+#define D0F0xE4_WRAP_8011_TxclkPermStop_OFFSET 8
+#define D0F0xE4_WRAP_8011_TxclkPermStop_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkPermStop_MASK 0x100
+#define D0F0xE4_WRAP_8011_TxclkRegsGateEnable_OFFSET 9
+#define D0F0xE4_WRAP_8011_TxclkRegsGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkRegsGateEnable_MASK 0x200
+#define D0F0xE4_WRAP_8011_TxclkRegsGateLatency_OFFSET 10
+#define D0F0xE4_WRAP_8011_TxclkRegsGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8011_TxclkRegsGateLatency_MASK 0xfc00
+#define D0F0xE4_WRAP_8011_RcvrDetClkEnable_OFFSET 16
+#define D0F0xE4_WRAP_8011_RcvrDetClkEnable_WIDTH 1
+#define D0F0xE4_WRAP_8011_RcvrDetClkEnable_MASK 0x10000
+#define D0F0xE4_WRAP_8011_TxclkPermGateLatency_OFFSET 17
+#define D0F0xE4_WRAP_8011_TxclkPermGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8011_TxclkPermGateLatency_MASK 0x7e0000
+#define D0F0xE4_WRAP_8011_Reserved_23_23_OFFSET 23
+#define D0F0xE4_WRAP_8011_Reserved_23_23_WIDTH 1
+#define D0F0xE4_WRAP_8011_Reserved_23_23_MASK 0x800000
+#define D0F0xE4_WRAP_8011_TxclkLcntGateEnable_OFFSET 24
+#define D0F0xE4_WRAP_8011_TxclkLcntGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkLcntGateEnable_MASK 0x1000000
+#define D0F0xE4_WRAP_8011_Reserved_30_25_OFFSET 25
+#define D0F0xE4_WRAP_8011_Reserved_30_25_WIDTH 6
+#define D0F0xE4_WRAP_8011_Reserved_30_25_MASK 0x7e000000
+
+/// D0F0xE4_WRAP_8011
+typedef union {
+ struct { ///<
+ UINT32 TxclkDynGateLatency:6 ; ///<
+ UINT32 TxclkPermGateEven:1 ; ///<
+ UINT32 TxclkDynGateEnable:1 ; ///<
+ UINT32 TxclkPermStop:1 ; ///<
+ UINT32 TxclkRegsGateEnable:1 ; ///<
+ UINT32 TxclkRegsGateLatency:6 ; ///<
+ UINT32 RcvrDetClkEnable:1 ; ///<
+ UINT32 TxclkPermGateLatency:6 ; ///<
+ UINT32 Reserved_23_23:1 ; ///<
+ UINT32 TxclkLcntGateEnable:1 ; ///<
+ UINT32 Reserved_30_25:6 ; ///<
+ UINT32 Reserved_31_31:1 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8011_STRUCT;
+
+// **** D0F0xE4_WRAP_8012 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8012_ADDRESS 0x8012
+
+// Type
+#define D0F0xE4_WRAP_8012_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_8012_Pif1xIdleGateLatency_OFFSET 0
+#define D0F0xE4_WRAP_8012_Pif1xIdleGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8012_Pif1xIdleGateLatency_MASK 0x3f
+#define D0F0xE4_WRAP_8012_Reserved_6_6_OFFSET 6
+#define D0F0xE4_WRAP_8012_Reserved_6_6_WIDTH 1
+#define D0F0xE4_WRAP_8012_Reserved_6_6_MASK 0x40
+#define D0F0xE4_WRAP_8012_Pif1xIdleGateEnable_OFFSET 7
+#define D0F0xE4_WRAP_8012_Pif1xIdleGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8012_Pif1xIdleGateEnable_MASK 0x80
+#define D0F0xE4_WRAP_8012_Pif1xIdleResumeLatency_OFFSET 8
+#define D0F0xE4_WRAP_8012_Pif1xIdleResumeLatency_WIDTH 6
+#define D0F0xE4_WRAP_8012_Pif1xIdleResumeLatency_MASK 0x3f00
+
+/// D0F0xE4_WRAP_8012
+typedef union {
+ struct { ///<
+ UINT32 Pif1xIdleGateLatency:6 ; ///<
+ UINT32 Reserved_6_6:1 ; ///<
+ UINT32 Pif1xIdleGateEnable:1 ; ///<
+ UINT32 Pif1xIdleResumeLatency:6 ; ///<
+ UINT32 Reserved_15_14:2 ; ///<
+ UINT32 Reserved_21_16:6 ; ///<
+ UINT32 Reserved_22_22:1 ; ///<
+ UINT32 Reserved_23_23:1 ; ///<
+ UINT32 Reserved_24_29:6 ; ///<
+ UINT32 Reserved_31_30:2 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8012_STRUCT;
+
+
+// **** D0F0xE4_WRAP_8021 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8021_ADDRESS 0x8021
+
+// Type
+#define D0F0xE4_WRAP_8021_TYPE TYPE_D0F0xE4
+
+// **** D0F0xE4_WRAP_8022 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8022_ADDRESS 0x8022
+
+// Type
+#define D0F0xE4_WRAP_8022_TYPE TYPE_D0F0xE4
+// Field Data
+
+// **** D0F0xE4_WRAP_8023 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8023_ADDRESS 0x8023
+
+// Type
+#define D0F0xE4_WRAP_8023_TYPE TYPE_D0F0xE4
+/// D0F0xE4_WRAP_8023
+typedef union {
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8023_STRUCT;
+
+// **** D0F0xE4_WRAP_8025 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8025_ADDRESS 0x8025
+
+// Type
+#define D0F0xE4_WRAP_8025_TYPE TYPE_D0F0xE4
+/// D0F0xE4_WRAP_8025
+typedef union {
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8025_STRUCT;
+
+
+// **** D0F0xE4_WRAP_8040 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8040_ADDRESS 0x8040
+
+// Type
+#define D0F0xE4_WRAP_8040_TYPE TYPE_D0F0xE4
+
+
+// **** D0F0xE4_WRAP_8060 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8060_ADDRESS 0x8060
+
+// Type
+#define D0F0xE4_WRAP_8060_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_8060_BifGlobalReset_OFFSET 16
+#define D0F0xE4_WRAP_8060_BifGlobalReset_WIDTH 1
+#define D0F0xE4_WRAP_8060_BifGlobalReset_MASK 0x10000
+#define D0F0xE4_WRAP_8060_BifCalibrationReset_OFFSET 17
+#define D0F0xE4_WRAP_8060_BifCalibrationReset_WIDTH 1
+#define D0F0xE4_WRAP_8060_BifCalibrationReset_MASK 0x20000
+#define D0F0xE4_WRAP_8060_Reserved_31_18_OFFSET 18
+#define D0F0xE4_WRAP_8060_Reserved_31_18_WIDTH 14
+#define D0F0xE4_WRAP_8060_Reserved_31_18_MASK 0xfffc0000
+
+/// D0F0xE4_WRAP_8060
+typedef union {
+ struct { ///<
+ UINT32 Reconfigure:1 ; ///<
+ UINT32 Reserved_1_1:1 ; ///<
+ UINT32 ResetComplete:1 ; ///<
+ UINT32 Reserved_15_3:13; ///<
+ UINT32 BifGlobalReset:1 ; ///<
+ UINT32 BifCalibrationReset:1 ; ///<
+ UINT32 Reserved_31_18:14; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8060_STRUCT;
+
+// **** D0F0xE4_WRAP_8062 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8062_ADDRESS 0x8062
+
+// Type
+#define D0F0xE4_WRAP_8062_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_8062_ReconfigureEn_OFFSET 0
+#define D0F0xE4_WRAP_8062_ReconfigureEn_WIDTH 1
+#define D0F0xE4_WRAP_8062_ReconfigureEn_MASK 0x1
+#define D0F0xE4_WRAP_8062_Reserved_1_1_OFFSET 1
+#define D0F0xE4_WRAP_8062_Reserved_1_1_WIDTH 1
+#define D0F0xE4_WRAP_8062_Reserved_1_1_MASK 0x2
+#define D0F0xE4_WRAP_8062_ResetPeriod_OFFSET 2
+#define D0F0xE4_WRAP_8062_ResetPeriod_WIDTH 3
+#define D0F0xE4_WRAP_8062_ResetPeriod_MASK 0x1c
+#define D0F0xE4_WRAP_8062_Reserved_9_5_OFFSET 5
+#define D0F0xE4_WRAP_8062_Reserved_9_5_WIDTH 5
+#define D0F0xE4_WRAP_8062_Reserved_9_5_MASK 0x3e0
+#define D0F0xE4_WRAP_8062_BlockOnIdle_OFFSET 10
+#define D0F0xE4_WRAP_8062_BlockOnIdle_WIDTH 1
+#define D0F0xE4_WRAP_8062_BlockOnIdle_MASK 0x400
+#define D0F0xE4_WRAP_8062_ConfigXferMode_OFFSET 11
+#define D0F0xE4_WRAP_8062_ConfigXferMode_WIDTH 1
+#define D0F0xE4_WRAP_8062_ConfigXferMode_MASK 0x800
+#define D0F0xE4_WRAP_8062_Reserved_31_12_OFFSET 12
+#define D0F0xE4_WRAP_8062_Reserved_31_12_WIDTH 20
+#define D0F0xE4_WRAP_8062_Reserved_31_12_MASK 0xfffff000
+
+/// D0F0xE4_WRAP_8062
+typedef union {
+ struct { ///<
+ UINT32 ReconfigureEn:1 ; ///<
+ UINT32 Reserved_1_1:1 ; ///<
+ UINT32 ResetPeriod:3 ; ///<
+ UINT32 Reserved_9_5:5 ; ///<
+ UINT32 BlockOnIdle:1 ; ///<
+ UINT32 ConfigXferMode:1 ; ///<
+ UINT32 Reserved_31_12:20; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8062_STRUCT;
+
+
+// **** D0F0xE4_PIF_0010 Register Definition ****
+// Address
+#define D0F0xE4_PIF_0010_ADDRESS 0x10
+
+// Type
+#define D0F0xE4_PIF_0010_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_PIF_0010_Reserved_3_0_OFFSET 0
+#define D0F0xE4_PIF_0010_Reserved_3_0_WIDTH 4
+#define D0F0xE4_PIF_0010_Reserved_3_0_MASK 0xf
+#define D0F0xE4_PIF_0010_EiDetCycleMode_OFFSET 4
+#define D0F0xE4_PIF_0010_EiDetCycleMode_WIDTH 1
+#define D0F0xE4_PIF_0010_EiDetCycleMode_MASK 0x10
+#define D0F0xE4_PIF_0010_Reserved_5_5_OFFSET 5
+#define D0F0xE4_PIF_0010_Reserved_5_5_WIDTH 1
+#define D0F0xE4_PIF_0010_Reserved_5_5_MASK 0x20
+#define D0F0xE4_PIF_0010_RxDetectFifoResetMode_OFFSET 6
+#define D0F0xE4_PIF_0010_RxDetectFifoResetMode_WIDTH 1
+#define D0F0xE4_PIF_0010_RxDetectFifoResetMode_MASK 0x40
+#define D0F0xE4_PIF_0010_RxDetectTxPwrMode_OFFSET 7
+#define D0F0xE4_PIF_0010_RxDetectTxPwrMode_WIDTH 1
+#define D0F0xE4_PIF_0010_RxDetectTxPwrMode_MASK 0x80
+#define D0F0xE4_PIF_0010_Reserved_16_8_OFFSET 8
+#define D0F0xE4_PIF_0010_Reserved_16_8_WIDTH 9
+#define D0F0xE4_PIF_0010_Reserved_16_8_MASK 0x1ff00
+#define D0F0xE4_PIF_0010_Ls2ExitTime_OFFSET 17
+#define D0F0xE4_PIF_0010_Ls2ExitTime_WIDTH 3
+#define D0F0xE4_PIF_0010_Ls2ExitTime_MASK 0xe0000
+#define D0F0xE4_PIF_0010_EiCycleOffTime_MASK 0x700000
+#define D0F0xE4_PIF_0010_Reserved_31_23_OFFSET 23
+#define D0F0xE4_PIF_0010_Reserved_31_23_WIDTH 9
+#define D0F0xE4_PIF_0010_Reserved_31_23_MASK 0xff800000
+
+/// D0F0xE4_PIF_0010
+typedef union {
+ struct { ///<
+ UINT32 Reserved_3_0:4 ; ///<
+ UINT32 EiDetCycleMode:1 ; ///<
+ UINT32 Reserved_5_5:1 ; ///<
+ UINT32 RxDetectFifoResetMode:1 ; ///<
+ UINT32 RxDetectTxPwrMode:1 ; ///<
+ UINT32 Reserved_16_8:9 ; ///<
+ UINT32 Ls2ExitTime:3 ; ///<
+ UINT32 EiCycleOffTime:3 ; ///<
+ UINT32 Reserved_31_23:9 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_PIF_0010_STRUCT;
+
+// **** D0F0xE4_PIF_0011 Register Definition ****
+// Address
+#define D0F0xE4_PIF_0011_ADDRESS 0x11
+
+// Type
+#define D0F0xE4_PIF_0011_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_PIF_0011_X2Lane10_OFFSET 0
+#define D0F0xE4_PIF_0011_X2Lane10_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane10_MASK 0x1
+#define D0F0xE4_PIF_0011_X2Lane32_OFFSET 1
+#define D0F0xE4_PIF_0011_X2Lane32_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane32_MASK 0x2
+#define D0F0xE4_PIF_0011_X2Lane54_OFFSET 2
+#define D0F0xE4_PIF_0011_X2Lane54_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane54_MASK 0x4
+#define D0F0xE4_PIF_0011_X2Lane76_OFFSET 3
+#define D0F0xE4_PIF_0011_X2Lane76_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane76_MASK 0x8
+#define D0F0xE4_PIF_0011_Reserved_7_4_OFFSET 4
+#define D0F0xE4_PIF_0011_Reserved_7_4_WIDTH 4
+#define D0F0xE4_PIF_0011_Reserved_7_4_MASK 0xf0
+#define D0F0xE4_PIF_0011_X4Lane30_OFFSET 8
+#define D0F0xE4_PIF_0011_X4Lane30_WIDTH 1
+#define D0F0xE4_PIF_0011_X4Lane30_MASK 0x100
+#define D0F0xE4_PIF_0011_X4Lane74_OFFSET 9
+#define D0F0xE4_PIF_0011_X4Lane74_WIDTH 1
+#define D0F0xE4_PIF_0011_X4Lane74_MASK 0x200
+#define D0F0xE4_PIF_0011_Reserved_11_10_OFFSET 10
+#define D0F0xE4_PIF_0011_Reserved_11_10_WIDTH 2
+#define D0F0xE4_PIF_0011_Reserved_11_10_MASK 0xc00
+#define D0F0xE4_PIF_0011_Reserved_15_13_OFFSET 13
+#define D0F0xE4_PIF_0011_Reserved_15_13_WIDTH 3
+#define D0F0xE4_PIF_0011_Reserved_15_13_MASK 0xe000
+#define D0F0xE4_PIF_0011_X8Lane70_OFFSET 16
+#define D0F0xE4_PIF_0011_X8Lane70_WIDTH 1
+#define D0F0xE4_PIF_0011_X8Lane70_MASK 0x10000
+#define D0F0xE4_PIF_0011_Reserved_24_17_OFFSET 17
+#define D0F0xE4_PIF_0011_Reserved_24_17_WIDTH 8
+#define D0F0xE4_PIF_0011_Reserved_24_17_MASK 0x1fe0000
+#define D0F0xE4_PIF_0011_MultiPif_OFFSET 25
+#define D0F0xE4_PIF_0011_MultiPif_WIDTH 1
+#define D0F0xE4_PIF_0011_MultiPif_MASK 0x2000000
+#define D0F0xE4_PIF_0011_Reserved_31_26_OFFSET 26
+#define D0F0xE4_PIF_0011_Reserved_31_26_WIDTH 6
+#define D0F0xE4_PIF_0011_Reserved_31_26_MASK 0xfc000000
+
+/// D0F0xE4_PIF_0011
+typedef union {
+ struct { ///<
+ UINT32 X2Lane10:1 ; ///<
+ UINT32 X2Lane32:1 ; ///<
+ UINT32 X2Lane54:1 ; ///<
+ UINT32 X2Lane76:1 ; ///<
+ UINT32 Reserved_7_4:4 ; ///<
+ UINT32 X4Lane30:1 ; ///<
+ UINT32 X4Lane74:1 ; ///<
+ UINT32 Reserved_11_10:2 ; ///<
+ UINT32 b12:1 ; ///<
+ UINT32 Reserved_15_13:3 ; ///<
+ UINT32 X8Lane70:1 ; ///<
+ UINT32 Reserved_24_17:8 ; ///<
+ UINT32 MultiPif:1 ; ///<
+ UINT32 Reserved_31_26:6 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_PIF_0011_STRUCT;
+
+// **** D0F0xE4_PIF_0012 Register Definition ****
+// Address
+#define D0F0xE4_PIF_0012_ADDRESS 0x12
+
+// Type
+#define D0F0xE4_PIF_0012_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_PIF_0012_TxPowerStateInTxs2_OFFSET 0
+#define D0F0xE4_PIF_0012_TxPowerStateInTxs2_WIDTH 3
+#define D0F0xE4_PIF_0012_TxPowerStateInTxs2_MASK 0x7
+#define D0F0xE4_PIF_0012_ForceRxEnInL0s_OFFSET 3
+#define D0F0xE4_PIF_0012_ForceRxEnInL0s_WIDTH 1
+#define D0F0xE4_PIF_0012_ForceRxEnInL0s_MASK 0x8
+#define D0F0xE4_PIF_0012_RxPowerStateInRxs2_OFFSET 4
+#define D0F0xE4_PIF_0012_RxPowerStateInRxs2_WIDTH 3
+#define D0F0xE4_PIF_0012_RxPowerStateInRxs2_MASK 0x70
+#define D0F0xE4_PIF_0012_PllPowerStateInTxs2_OFFSET 7
+#define D0F0xE4_PIF_0012_PllPowerStateInTxs2_WIDTH 3
+#define D0F0xE4_PIF_0012_PllPowerStateInTxs2_MASK 0x380
+#define D0F0xE4_PIF_0012_PllPowerStateInOff_OFFSET 10
+#define D0F0xE4_PIF_0012_PllPowerStateInOff_WIDTH 3
+#define D0F0xE4_PIF_0012_PllPowerStateInOff_MASK 0x1c00
+#define D0F0xE4_PIF_0012_Reserved_15_13_OFFSET 13
+#define D0F0xE4_PIF_0012_Reserved_15_13_WIDTH 3
+#define D0F0xE4_PIF_0012_Reserved_15_13_MASK 0xe000
+#define D0F0xE4_PIF_0012_Tx2p5clkClockGatingEn_OFFSET 16
+#define D0F0xE4_PIF_0012_Tx2p5clkClockGatingEn_WIDTH 1
+#define D0F0xE4_PIF_0012_Tx2p5clkClockGatingEn_MASK 0x10000
+#define D0F0xE4_PIF_0012_Reserved_23_17_OFFSET 17
+#define D0F0xE4_PIF_0012_Reserved_23_17_WIDTH 7
+#define D0F0xE4_PIF_0012_Reserved_23_17_MASK 0xfe0000
+#define D0F0xE4_PIF_0012_PllRampUpTime_OFFSET 24
+#define D0F0xE4_PIF_0012_PllRampUpTime_WIDTH 3
+#define D0F0xE4_PIF_0012_PllRampUpTime_MASK 0x7000000
+#define D0F0xE4_PIF_0012_Reserved_27_27_OFFSET 27
+#define D0F0xE4_PIF_0012_Reserved_27_27_WIDTH 1
+#define D0F0xE4_PIF_0012_Reserved_27_27_MASK 0x8000000
+#define D0F0xE4_PIF_0012_PllPwrOverrideEn_OFFSET 28
+#define D0F0xE4_PIF_0012_PllPwrOverrideEn_WIDTH 1
+#define D0F0xE4_PIF_0012_PllPwrOverrideEn_MASK 0x10000000
+#define D0F0xE4_PIF_0012_PllPwrOverrideVal_OFFSET 29
+#define D0F0xE4_PIF_0012_PllPwrOverrideVal_WIDTH 3
+#define D0F0xE4_PIF_0012_PllPwrOverrideVal_MASK 0xe0000000
+
+/// D0F0xE4_PIF_0012
+typedef union {
+ struct { ///<
+ UINT32 TxPowerStateInTxs2:3 ; ///<
+ UINT32 ForceRxEnInL0s:1 ; ///<
+ UINT32 RxPowerStateInRxs2:3 ; ///<
+ UINT32 PllPowerStateInTxs2:3 ; ///<
+ UINT32 PllPowerStateInOff:3 ; ///<
+ UINT32 Reserved_15_13:3 ; ///<
+ UINT32 Tx2p5clkClockGatingEn:1 ; ///<
+ UINT32 Reserved_23_17:7 ; ///<
+ UINT32 PllRampUpTime:3 ; ///<
+ UINT32 Reserved_27_27:1 ; ///<
+ UINT32 PllPwrOverrideEn:1 ; ///<
+ UINT32 PllPwrOverrideVal:3 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_PIF_0012_STRUCT;
+
+// **** D0F0xE4_PIF_0013 Register Definition ****
+// Address
+#define D0F0xE4_PIF_0013_ADDRESS 0x13
+
+// Type
+#define D0F0xE4_PIF_0013_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_PIF_0013_TxPowerStateInTxs2_OFFSET 0
+#define D0F0xE4_PIF_0013_TxPowerStateInTxs2_WIDTH 3
+#define D0F0xE4_PIF_0013_TxPowerStateInTxs2_MASK 0x7
+#define D0F0xE4_PIF_0013_ForceRxEnInL0s_OFFSET 3
+#define D0F0xE4_PIF_0013_ForceRxEnInL0s_WIDTH 1
+#define D0F0xE4_PIF_0013_ForceRxEnInL0s_MASK 0x8
+#define D0F0xE4_PIF_0013_RxPowerStateInRxs2_OFFSET 4
+#define D0F0xE4_PIF_0013_RxPowerStateInRxs2_WIDTH 3
+#define D0F0xE4_PIF_0013_RxPowerStateInRxs2_MASK 0x70
+#define D0F0xE4_PIF_0013_PllPowerStateInTxs2_OFFSET 7
+#define D0F0xE4_PIF_0013_PllPowerStateInTxs2_WIDTH 3
+#define D0F0xE4_PIF_0013_PllPowerStateInTxs2_MASK 0x380
+#define D0F0xE4_PIF_0013_PllPowerStateInOff_OFFSET 10
+#define D0F0xE4_PIF_0013_PllPowerStateInOff_WIDTH 3
+#define D0F0xE4_PIF_0013_PllPowerStateInOff_MASK 0x1c00
+#define D0F0xE4_PIF_0013_Reserved_15_13_OFFSET 13
+#define D0F0xE4_PIF_0013_Reserved_15_13_WIDTH 3
+#define D0F0xE4_PIF_0013_Reserved_15_13_MASK 0xe000
+#define D0F0xE4_PIF_0013_Tx2p5clkClockGatingEn_OFFSET 16
+#define D0F0xE4_PIF_0013_Tx2p5clkClockGatingEn_WIDTH 1
+#define D0F0xE4_PIF_0013_Tx2p5clkClockGatingEn_MASK 0x10000
+#define D0F0xE4_PIF_0013_Reserved_23_17_OFFSET 17
+#define D0F0xE4_PIF_0013_Reserved_23_17_WIDTH 7
+#define D0F0xE4_PIF_0013_Reserved_23_17_MASK 0xfe0000
+#define D0F0xE4_PIF_0013_PllRampUpTime_OFFSET 24
+#define D0F0xE4_PIF_0013_PllRampUpTime_WIDTH 3
+#define D0F0xE4_PIF_0013_PllRampUpTime_MASK 0x7000000
+#define D0F0xE4_PIF_0013_Reserved_27_27_OFFSET 27
+#define D0F0xE4_PIF_0013_Reserved_27_27_WIDTH 1
+#define D0F0xE4_PIF_0013_Reserved_27_27_MASK 0x8000000
+#define D0F0xE4_PIF_0013_PllPwrOverrideEn_OFFSET 28
+#define D0F0xE4_PIF_0013_PllPwrOverrideEn_WIDTH 1
+#define D0F0xE4_PIF_0013_PllPwrOverrideEn_MASK 0x10000000
+#define D0F0xE4_PIF_0013_PllPwrOverrideVal_OFFSET 29
+#define D0F0xE4_PIF_0013_PllPwrOverrideVal_WIDTH 3
+#define D0F0xE4_PIF_0013_PllPwrOverrideVal_MASK 0xe0000000
+
+/// D0F0xE4_PIF_0013
+typedef union {
+ struct { ///<
+ UINT32 TxPowerStateInTxs2:3 ; ///<
+ UINT32 ForceRxEnInL0s:1 ; ///<
+ UINT32 RxPowerStateInRxs2:3 ; ///<
+ UINT32 PllPowerStateInTxs2:3 ; ///<
+ UINT32 PllPowerStateInOff:3 ; ///<
+ UINT32 Reserved_15_13:3 ; ///<
+ UINT32 Tx2p5clkClockGatingEn:1 ; ///<
+ UINT32 Reserved_23_17:7 ; ///<
+ UINT32 PllRampUpTime:3 ; ///<
+ UINT32 Reserved_27_27:1 ; ///<
+ UINT32 PllPwrOverrideEn:1 ; ///<
+ UINT32 PllPwrOverrideVal:3 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_PIF_0013_STRUCT;
+
+
+// **** D0F0xE4_CORE_0011 Register Definition ****
+// Address
+#define D0F0xE4_CORE_0011_ADDRESS 0x11
+
+// Type
+#define D0F0xE4_CORE_0011_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_CORE_0011_DynClkLatency_OFFSET 0
+#define D0F0xE4_CORE_0011_DynClkLatency_WIDTH 4
+#define D0F0xE4_CORE_0011_DynClkLatency_MASK 0xf
+#define D0F0xE4_CORE_0011_Reserved_31_4_OFFSET 4
+#define D0F0xE4_CORE_0011_Reserved_31_4_WIDTH 28
+#define D0F0xE4_CORE_0011_Reserved_31_4_MASK 0xfffffff0
+
+/// D0F0xE4_CORE_0011
+typedef union {
+ struct { ///<
+ UINT32 DynClkLatency:4 ; ///<
+ UINT32 Reserved_31_4:28; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_CORE_0011_STRUCT;
+
+
+
+
+
+
+
+
+// **** DxF0xE4_x70 Register Definition ****
+// Address
+
+
+// **** D0F0xE4_WRAP_8013 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8013_ADDRESS 0x8013
+
+// Field Data
+#define D0F0xE4_WRAP_8013_MasterPciePllA_OFFSET 0
+#define D0F0xE4_WRAP_8013_MasterPciePllA_WIDTH 1
+#define D0F0xE4_WRAP_8013_MasterPciePllA_MASK 0x1
+#define D0F0xE4_WRAP_8013_Reserved_1_1_OFFSET 1
+#define D0F0xE4_WRAP_8013_Reserved_1_1_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_1_1_MASK 0x2
+#define D0F0xE4_WRAP_8013_Reserved_2_2_OFFSET 2
+#define D0F0xE4_WRAP_8013_Reserved_2_2_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_2_2_MASK 0x4
+#define D0F0xE4_WRAP_8013_Reserved_3_3_OFFSET 3
+#define D0F0xE4_WRAP_8013_Reserved_3_3_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_3_3_MASK 0x8
+#define D0F0xE4_WRAP_8013_ClkDividerResetOverrideA_OFFSET 4
+#define D0F0xE4_WRAP_8013_ClkDividerResetOverrideA_WIDTH 1
+#define D0F0xE4_WRAP_8013_ClkDividerResetOverrideA_MASK 0x10
+#define D0F0xE4_WRAP_8013_Reserved_5_5_OFFSET 5
+#define D0F0xE4_WRAP_8013_Reserved_5_5_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_5_5_MASK 0x20
+#define D0F0xE4_WRAP_8013_Reserved_6_6_OFFSET 6
+#define D0F0xE4_WRAP_8013_Reserved_6_6_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_6_6_MASK 0x40
+#define D0F0xE4_WRAP_8013_Reserved_7_7_OFFSET 7
+#define D0F0xE4_WRAP_8013_Reserved_7_7_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_7_7_MASK 0x80
+#define D0F0xE4_WRAP_8013_TxclkSelCoreOverride_OFFSET 8
+#define D0F0xE4_WRAP_8013_TxclkSelCoreOverride_WIDTH 1
+#define D0F0xE4_WRAP_8013_TxclkSelCoreOverride_MASK 0x100
+#define D0F0xE4_WRAP_8013_TxclkSelPifAOverride_OFFSET 9
+#define D0F0xE4_WRAP_8013_TxclkSelPifAOverride_WIDTH 1
+#define D0F0xE4_WRAP_8013_TxclkSelPifAOverride_MASK 0x200
+#define D0F0xE4_WRAP_8013_Reserved_10_10_OFFSET 10
+#define D0F0xE4_WRAP_8013_Reserved_10_10_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_10_10_MASK 0x400
+#define D0F0xE4_WRAP_8013_Reserved_11_11_OFFSET 11
+#define D0F0xE4_WRAP_8013_Reserved_11_11_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_11_11_MASK 0x800
+#define D0F0xE4_WRAP_8013_Reserved_12_12_OFFSET 12
+#define D0F0xE4_WRAP_8013_Reserved_12_12_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_12_12_MASK 0x1000
+#define D0F0xE4_WRAP_8013_Reserved_15_13_OFFSET 13
+#define D0F0xE4_WRAP_8013_Reserved_15_13_WIDTH 3
+#define D0F0xE4_WRAP_8013_Reserved_15_13_MASK 0xe000
+#define D0F0xE4_WRAP_8013_Reserved_16_16_OFFSET 16
+#define D0F0xE4_WRAP_8013_Reserved_16_16_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_16_16_MASK 0x10000
+#define D0F0xE4_WRAP_8013_Reserved_19_17_OFFSET 17
+#define D0F0xE4_WRAP_8013_Reserved_19_17_WIDTH 3
+#define D0F0xE4_WRAP_8013_Reserved_19_17_MASK 0xe0000
+#define D0F0xE4_WRAP_8013_Reserved_20_20_OFFSET 20
+#define D0F0xE4_WRAP_8013_Reserved_20_20_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_20_20_MASK 0x100000
+#define D0F0xE4_WRAP_8013_Reserved_31_21_OFFSET 21
+#define D0F0xE4_WRAP_8013_Reserved_31_21_WIDTH 11
+#define D0F0xE4_WRAP_8013_Reserved_31_21_MASK 0xffe00000
+
+/// D0F0xE4_WRAP_8013
+typedef union {
+ struct { ///<
+ UINT32 MasterPciePllA:1 ; ///<
+ UINT32 MasterPciePllB:1 ; ///<
+ UINT32 MasterPciePllC:1 ; ///<
+ UINT32 MasterPciePllD:1 ; ///<
+ UINT32 ClkDividerResetOverrideA:1 ; ///<
+ UINT32 Reserved_5_5:1 ; ///<
+ UINT32 Reserved_6_6:1 ; ///<
+ UINT32 Reserved_7_7:1 ; ///<
+ UINT32 TxclkSelCoreOverride:1 ; ///<
+ UINT32 TxclkSelPifAOverride:1 ; ///<
+ UINT32 Reserved_10_10:1 ; ///<
+ UINT32 Reserved_11_11:1 ; ///<
+ UINT32 Reserved_12_12:1 ; ///<
+ UINT32 Reserved_15_13:3 ; ///<
+ UINT32 Reserved_16_16:1 ; ///<
+ UINT32 Reserved_19_17:3 ; ///<
+ UINT32 Reserved_20_20:1 ; ///<
+ UINT32 Reserved_31_21:11; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8013_STRUCT;
+
+// **** D0F0xE4_WRAP_8014 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8014_ADDRESS 0x8014
+
+// Field Data
+#define D0F0xE4_WRAP_8014_TxclkPermGateEnable_OFFSET 0
+#define D0F0xE4_WRAP_8014_TxclkPermGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_TxclkPermGateEnable_MASK 0x1
+#define D0F0xE4_WRAP_8014_TxclkPrbsGateEnable_OFFSET 1
+#define D0F0xE4_WRAP_8014_TxclkPrbsGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_TxclkPrbsGateEnable_MASK 0x2
+#define D0F0xE4_WRAP_8014_Reserved_2_2_OFFSET 2
+#define D0F0xE4_WRAP_8014_Reserved_2_2_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_2_2_MASK 0x4
+#define D0F0xE4_WRAP_8014_Reserved_3_3_OFFSET 3
+#define D0F0xE4_WRAP_8014_Reserved_3_3_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_3_3_MASK 0x8
+#define D0F0xE4_WRAP_8014_Reserved_4_4_OFFSET 4
+#define D0F0xE4_WRAP_8014_Reserved_4_4_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_4_4_MASK 0x10
+#define D0F0xE4_WRAP_8014_Reserved_5_5_OFFSET 5
+#define D0F0xE4_WRAP_8014_Reserved_5_5_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_5_5_MASK 0x20
+#define D0F0xE4_WRAP_8014_Reserved_6_6_OFFSET 6
+#define D0F0xE4_WRAP_8014_Reserved_6_6_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_6_6_MASK 0x40
+#define D0F0xE4_WRAP_8014_Reserved_7_7_OFFSET 7
+#define D0F0xE4_WRAP_8014_Reserved_7_7_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_7_7_MASK 0x80
+#define D0F0xE4_WRAP_8014_Reserved_8_8_OFFSET 8
+#define D0F0xE4_WRAP_8014_Reserved_8_8_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_8_8_MASK 0x100
+#define D0F0xE4_WRAP_8014_Reserved_9_9_OFFSET 9
+#define D0F0xE4_WRAP_8014_Reserved_9_9_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_9_9_MASK 0x200
+#define D0F0xE4_WRAP_8014_Reserved_10_10_OFFSET 10
+#define D0F0xE4_WRAP_8014_Reserved_10_10_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_10_10_MASK 0x400
+#define D0F0xE4_WRAP_8014_Reserved_11_11_OFFSET 11
+#define D0F0xE4_WRAP_8014_Reserved_11_11_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_11_11_MASK 0x800
+#define D0F0xE4_WRAP_8014_PcieGatePifA1xEnable_OFFSET 12
+#define D0F0xE4_WRAP_8014_PcieGatePifA1xEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_PcieGatePifA1xEnable_MASK 0x1000
+#define D0F0xE4_WRAP_8014_Reserved_13_13_OFFSET 13
+#define D0F0xE4_WRAP_8014_Reserved_13_13_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_13_13_MASK 0x2000
+#define D0F0xE4_WRAP_8014_Reserved_14_14_OFFSET 14
+#define D0F0xE4_WRAP_8014_Reserved_14_14_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_14_14_MASK 0x4000
+#define D0F0xE4_WRAP_8014_Reserved_15_15_OFFSET 15
+#define D0F0xE4_WRAP_8014_Reserved_15_15_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_15_15_MASK 0x8000
+#define D0F0xE4_WRAP_8014_PcieGatePifA2p5xEnable_OFFSET 16
+#define D0F0xE4_WRAP_8014_PcieGatePifA2p5xEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_PcieGatePifA2p5xEnable_MASK 0x10000
+#define D0F0xE4_WRAP_8014_Reserved_17_17_OFFSET 17
+#define D0F0xE4_WRAP_8014_Reserved_17_17_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_17_17_MASK 0x20000
+#define D0F0xE4_WRAP_8014_Reserved_18_18_OFFSET 18
+#define D0F0xE4_WRAP_8014_Reserved_18_18_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_18_18_MASK 0x40000
+#define D0F0xE4_WRAP_8014_Reserved_19_19_OFFSET 19
+#define D0F0xE4_WRAP_8014_Reserved_19_19_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_19_19_MASK 0x80000
+#define D0F0xE4_WRAP_8014_TxclkPermGateOnlyWhenPllPwrDn_OFFSET 20
+#define D0F0xE4_WRAP_8014_TxclkPermGateOnlyWhenPllPwrDn_WIDTH 1
+#define D0F0xE4_WRAP_8014_TxclkPermGateOnlyWhenPllPwrDn_MASK 0x100000
+#define D0F0xE4_WRAP_8014_Reserved_31_21_OFFSET 21
+#define D0F0xE4_WRAP_8014_Reserved_31_21_WIDTH 11
+#define D0F0xE4_WRAP_8014_Reserved_31_21_MASK 0xffe00000
+
+/// D0F0xE4_WRAP_8014
+typedef union {
+ struct {
+ UINT32 TxclkPermGateEnable:1 ; ///<
+ UINT32 TxclkPrbsGateEnable:1 ; ///<
+ UINT32 DdiGatePifA1xEnable:1 ; ///<
+ UINT32 DdiGatePifB1xEnable:1 ; ///<
+ UINT32 DdiGatePifC1xEnable:1 ; ///<
+ UINT32 DdiGatePifD1xEnable:1 ; ///<
+ UINT32 DdiGateDigAEnable:1 ; ///<
+ UINT32 DdiGateDigBEnable:1 ; ///<
+ UINT32 DdiGatePifA2p5xEnable:1 ; ///<
+ UINT32 DdiGatePifB2p5xEnable:1 ; ///<
+ UINT32 DdiGatePifC2p5xEnable:1 ; ///<
+ UINT32 DdiGatePifD2p5xEnable:1 ; ///<
+ UINT32 PcieGatePifA1xEnable:1 ; ///<
+ UINT32 PcieGatePifB1xEnable:1 ; ///<
+ UINT32 PcieGatePifC1xEnable:1 ; ///<
+ UINT32 PcieGatePifD1xEnable:1 ; ///<
+ UINT32 PcieGatePifA2p5xEnable:1 ; ///<
+ UINT32 PcieGatePifB2p5xEnable:1 ; ///<
+ UINT32 PcieGatePifC2p5xEnable:1 ; ///<
+ UINT32 PcieGatePifD2p5xEnable:1 ; ///<
+ UINT32 TxclkPermGateOnlyWhenPllPwrDn:1 ; ///<
+ UINT32 Reserved_31_21:11; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8014_STRUCT;
+
+// **** D0F0x64_x51 Register Definition ****
+// Address
+#define D0F0x64_x51_ADDRESS 0x51
+
+// Type
+#define D0F0x64_x51_TYPE TYPE_D0F0x64
+
+
+// **** D0F0xE4_CORE_0010 Register Definition ****
+// Address
+#define D0F0xE4_CORE_0010_ADDRESS 0x10
+
+// Type
+#define D0F0xE4_CORE_0010_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_CORE_0010_HwInitWrLock_OFFSET 0
+#define D0F0xE4_CORE_0010_HwInitWrLock_WIDTH 1
+#define D0F0xE4_CORE_0010_HwInitWrLock_MASK 0x1
+#define D0F0xE4_CORE_0010_LcHotPlugDelSel_OFFSET 1
+#define D0F0xE4_CORE_0010_LcHotPlugDelSel_WIDTH 3
+#define D0F0xE4_CORE_0010_LcHotPlugDelSel_MASK 0xe
+#define D0F0xE4_CORE_0010_Reserved_6_4_OFFSET 4
+#define D0F0xE4_CORE_0010_Reserved_6_4_WIDTH 3
+#define D0F0xE4_CORE_0010_Reserved_6_4_MASK 0x70
+#define D0F0xE4_CORE_0010_Reserved_8_8_OFFSET 8
+#define D0F0xE4_CORE_0010_Reserved_8_8_WIDTH 1
+#define D0F0xE4_CORE_0010_Reserved_8_8_MASK 0x100
+#define D0F0xE4_CORE_0010_UmiNpMemWrite_OFFSET 9
+#define D0F0xE4_CORE_0010_UmiNpMemWrite_WIDTH 1
+#define D0F0xE4_CORE_0010_UmiNpMemWrite_MASK 0x200
+#define D0F0xE4_CORE_0010_RxUmiAdjPayloadSize_OFFSET 10
+#define D0F0xE4_CORE_0010_RxUmiAdjPayloadSize_WIDTH 3
+#define D0F0xE4_CORE_0010_RxUmiAdjPayloadSize_MASK 0x1c00
+#define D0F0xE4_CORE_0010_Reserved_15_13_OFFSET 13
+#define D0F0xE4_CORE_0010_Reserved_15_13_WIDTH 3
+#define D0F0xE4_CORE_0010_Reserved_15_13_MASK 0xe000
+
+/// D0F0xE4_CORE_0010
+typedef union {
+ struct { ///<
+ UINT32 HwInitWrLock:1 ; ///<
+ UINT32 LcHotPlugDelSel:3 ; ///<
+ UINT32 Reserved_6_4:3 ; ///<
+ UINT32 :1 ; ///<
+ UINT32 Reserved_8_8:1 ; ///<
+ UINT32 UmiNpMemWrite:1 ; ///<
+ UINT32 RxUmiAdjPayloadSize:3 ; ///<
+ UINT32 Reserved_15_13:3 ; ///<
+ UINT32 :1 ; ///<
+ UINT32 :1 ; ///<
+ UINT32 :1 ; ///<
+ UINT32 :1 ; ///<
+ UINT32 :1 ; ///<
+ UINT32 :1 ; ///<
+ UINT32 :1 ; ///<
+ UINT32 :1 ; ///<
+ UINT32 :6 ; ///<
+ UINT32 :1 ; ///<
+ UINT32 :1 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_CORE_0010_STRUCT;
+
+
+typedef union {
+ struct { ///<
+ UINT32 bit_0_0:1 ; ///<
+ UINT32 bit1:1 ; ///<
+ UINT32 bit2:1 ; ///<
+ UINT32 bit3:1 ; ///<
+ UINT32 bit4:1 ; ///<
+ UINT32 bit5:1 ; ///<
+ UINT32 bit6:1 ; ///<
+ UINT32 bit_7_7:1 ; ///<
+ UINT32 bit_9_8:2 ; ///<
+ UINT32 bit_10_10:1 ; ///<
+ UINT32 bit11:1 ; ///<
+ UINT32 bit12:1 ; ///<
+ UINT32 bit13:1 ; ///<
+ UINT32 bit14:1 ; ///<
+ UINT32 bit15:1 ; ///<
+ UINT32 bit16:1 ; ///<
+ UINT32 bit_17_17:1 ; ///<
+ UINT32 bit_19_18:2 ; ///<
+ UINT32 bit20:1 ; ///<
+ UINT32 bit_21_21:1 ; ///<
+ UINT32 bit_23_22:2 ; ///<
+ UINT32 bit24:1 ; ///<
+ UINT32 bit_25_25:1 ; ///<
+ UINT32 bit_27_26:2 ; ///<
+ UINT32 bit_31_28:4 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} GNBREGCOMMON_STR1_STRUCT;
+
+
+
+
+// **** D0F0xE4_PHY_6006 Register Definition ****
+// Address
+#define D0F0xE4_PHY_6006_ADDRESS 0x6006
+
+// Type
+#define D0F0xE4_PHY_6006_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_PHY_6006_TxMarginNom_OFFSET 0
+#define D0F0xE4_PHY_6006_TxMarginNom_WIDTH 8
+#define D0F0xE4_PHY_6006_TxMarginNom_MASK 0xff
+#define D0F0xE4_PHY_6006_DeemphGen1Nom_OFFSET 8
+#define D0F0xE4_PHY_6006_DeemphGen1Nom_WIDTH 8
+#define D0F0xE4_PHY_6006_DeemphGen1Nom_MASK 0xff00
+#define D0F0xE4_PHY_6006_Deemph35Gen2Nom_OFFSET 16
+#define D0F0xE4_PHY_6006_Deemph35Gen2Nom_WIDTH 8
+#define D0F0xE4_PHY_6006_Deemph35Gen2Nom_MASK 0xff0000
+#define D0F0xE4_PHY_6006_Deemph60Gen2Nom_OFFSET 24
+#define D0F0xE4_PHY_6006_Deemph60Gen2Nom_WIDTH 8
+#define D0F0xE4_PHY_6006_Deemph60Gen2Nom_MASK 0xff000000
+
+/// D0F0xE4_PHY_6006
+typedef union {
+ struct { ///<
+ UINT32 TxMarginNom:8 ; ///<
+ UINT32 DeemphGen1Nom:8 ; ///<
+ UINT32 Deemph35Gen2Nom:8 ; ///<
+ UINT32 Deemph60Gen2Nom:8 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_PHY_6006_STRUCT;
+
+// **** GMMx00 Register Definition ****
+// Address
+#define GMMx00_ADDRESS 0x0
+
+// Type
+#define GMMx00_TYPE TYPE_GMM
+// Field Data
+#define GMMx00_Offset_OFFSET 0
+#define GMMx00_Offset_WIDTH 31
+#define GMMx00_Offset_MASK 0x7fffffff
+#define GMMx00_Aper_OFFSET 31
+#define GMMx00_Aper_WIDTH 1
+#define GMMx00_Aper_MASK 0x80000000
+
+/// GMMx00
+typedef union {
+ struct { ///<
+ UINT32 Offset:31; ///<
+ UINT32 Aper:1 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} GMMx00_STRUCT;
+
+// **** GMMx04 Register Definition ****
+// Address
+#define GMMx04_ADDRESS 0x4
+
+// Type
+#define GMMx04_TYPE TYPE_GMM
+// Field Data
+#define GMMx04_Data_OFFSET 0
+#define GMMx04_Data_WIDTH 32
+#define GMMx04_Data_MASK 0xffffffff
+
+/// GMMx04
+typedef union {
+ struct { ///<
+ UINT32 Data:32; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} GMMx04_STRUCT;
+
+
+// **** D0F0xE4_WRAP_8016 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8016_ADDRESS 0x8016
+
+// Type
+#define D0F0xE4_WRAP_8016_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_8016_CalibAckLatency_OFFSET 0
+#define D0F0xE4_WRAP_8016_CalibAckLatency_WIDTH 6
+#define D0F0xE4_WRAP_8016_CalibAckLatency_MASK 0x3f
+#define D0F0xE4_WRAP_8016_Reserved_7_6_OFFSET 6
+#define D0F0xE4_WRAP_8016_Reserved_7_6_WIDTH 2
+#define D0F0xE4_WRAP_8016_Reserved_7_6_MASK 0xc0
+#define D0F0xE4_WRAP_8016_CalibDoneSelPifA_OFFSET 8
+#define D0F0xE4_WRAP_8016_CalibDoneSelPifA_WIDTH 1
+#define D0F0xE4_WRAP_8016_CalibDoneSelPifA_MASK 0x100
+#define D0F0xE4_WRAP_8016_Reserved_9_9_OFFSET 9
+#define D0F0xE4_WRAP_8016_Reserved_9_9_WIDTH 1
+#define D0F0xE4_WRAP_8016_Reserved_9_9_MASK 0x200
+#define D0F0xE4_WRAP_8016_Reserved_10_10_OFFSET 10
+#define D0F0xE4_WRAP_8016_Reserved_10_10_WIDTH 1
+#define D0F0xE4_WRAP_8016_Reserved_10_10_MASK 0x400
+#define D0F0xE4_WRAP_8016_Reserved_11_11_OFFSET 11
+#define D0F0xE4_WRAP_8016_Reserved_11_11_WIDTH 1
+#define D0F0xE4_WRAP_8016_Reserved_11_11_MASK 0x800
+#define D0F0xE4_WRAP_8016_Gen1OnlyEngage_OFFSET 12
+#define D0F0xE4_WRAP_8016_Gen1OnlyEngage_WIDTH 1
+#define D0F0xE4_WRAP_8016_Gen1OnlyEngage_MASK 0x1000
+#define D0F0xE4_WRAP_8016_Gen1OnlyEngaged_OFFSET 13
+#define D0F0xE4_WRAP_8016_Gen1OnlyEngaged_WIDTH 1
+#define D0F0xE4_WRAP_8016_Gen1OnlyEngaged_MASK 0x2000
+#define D0F0xE4_WRAP_8016_Reserved_15_14_OFFSET 14
+#define D0F0xE4_WRAP_8016_Reserved_15_14_WIDTH 2
+#define D0F0xE4_WRAP_8016_Reserved_15_14_MASK 0xc000
+#define D0F0xE4_WRAP_8016_LclkDynGateLatency_OFFSET 16
+#define D0F0xE4_WRAP_8016_LclkDynGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8016_LclkDynGateLatency_MASK 0x3f0000
+#define D0F0xE4_WRAP_8016_LclkGateFree_OFFSET 22
+#define D0F0xE4_WRAP_8016_LclkGateFree_WIDTH 1
+#define D0F0xE4_WRAP_8016_LclkGateFree_MASK 0x400000
+#define D0F0xE4_WRAP_8016_LclkDynGateEnable_OFFSET 23
+#define D0F0xE4_WRAP_8016_LclkDynGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8016_LclkDynGateEnable_MASK 0x800000
+#define D0F0xE4_WRAP_8016_Reserved_31_24_OFFSET 24
+#define D0F0xE4_WRAP_8016_Reserved_31_24_WIDTH 8
+#define D0F0xE4_WRAP_8016_Reserved_31_24_MASK 0xff000000
+
+/// D0F0xE4_WRAP_8016
+typedef union {
+ struct { ///<
+ UINT32 CalibAckLatency:6 ; ///<
+ UINT32 Reserved_7_6:2 ; ///<
+ UINT32 CalibDoneSelPifA:1 ; ///<
+ UINT32 Reserved_9_9:1 ; ///<
+ UINT32 Reserved_10_10:1 ; ///<
+ UINT32 Reserved_11_11:1 ; ///<
+ UINT32 Gen1OnlyEngage:1 ; ///<
+ UINT32 Gen1OnlyEngaged:1 ; ///<
+ UINT32 Reserved_15_14:2 ; ///<
+ UINT32 LclkDynGateLatency:6 ; ///<
+ UINT32 LclkGateFree:1 ; ///<
+ UINT32 LclkDynGateEnable:1 ; ///<
+ UINT32 Reserved_31_24:8 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8016_STRUCT;
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbRegistersCommonV2.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbRegistersCommonV2.h
new file mode 100644
index 0000000..4458039
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbRegistersCommonV2.h
@@ -0,0 +1,1445 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Register definitions
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 87271 $ @e \$Date: 2013-01-31 10:11:23 -0600 (Thu, 31 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBREGISTERS_CV2_H_
+#define _GNBREGISTERS_CV2_H_
+
+#define SMC_MSG_FIRMWARE_AUTH 0
+
+#ifndef WRAP_SPACE
+ #define WRAP_SPACE(w, x) (0x01300000 | (w << 16) | (x))
+#endif
+
+#ifndef CORE_SPACE
+ #define CORE_SPACE(c, x) (0x00010000 | (c << 24) | (x))
+#endif
+
+#ifndef PHY_SPACE
+ #define PHY_SPACE(w, p, x) (0x00200000 | ((p + 1) << 24) | (w << 16) | (x))
+#endif
+
+#ifndef PIF_SPACE
+ #define PIF_SPACE(w, p, x) (0x00100000 | ((p + 1) << 24) | (w << 16) | (x))
+#endif
+
+
+// **** D0F0xFC_x01 Register Definition ****
+// Address
+#define D0F0xFC_x01_ADDRESS 0x01
+
+// **** D0F0xFC_x02 Register Definition ****
+// Address
+#define D0F0xFC_x02_ADDRESS 0x02
+
+// **** D0F0xFC_x10 Register Definition ****
+// Address
+#define D0F0xFC_x10_ADDRESS 0x10
+// Type
+#define D0F0xFC_x10_TYPE TYPE_D0F0xFC
+
+// Field Data
+#define D0F0xFC_x10_BrExtIntrGrp_OFFSET 0
+#define D0F0xFC_x10_BrExtIntrGrp_WIDTH 3
+#define D0F0xFC_x10_BrExtIntrGrp_MASK 0x7
+#define D0F0xFC_x10_Reserved_3_3_OFFSET 3
+#define D0F0xFC_x10_Reserved_3_3_WIDTH 1
+#define D0F0xFC_x10_Reserved_3_3_MASK 0x8
+#define D0F0xFC_x10_BrExtIntrSwz_OFFSET 4
+#define D0F0xFC_x10_BrExtIntrSwz_WIDTH 2
+#define D0F0xFC_x10_BrExtIntrSwz_MASK 0x30
+#define D0F0xFC_x10_Reserved_15_6_OFFSET 6
+#define D0F0xFC_x10_Reserved_15_6_WIDTH 10
+#define D0F0xFC_x10_Reserved_15_6_MASK 0xFFC0
+#define D0F0xFC_x10_BrIntIntrMap_OFFSET 16
+#define D0F0xFC_x10_BrIntIntrMap_WIDTH 5
+#define D0F0xFC_x10_BrIntIntrMap_MASK 0x1F0000
+#define D0F0xFC_x10_Reserved_31_21_OFFSET 21
+#define D0F0xFC_x10_Reserved_31_21_WIDTH 11
+#define D0F0xFC_x10_Reserved_31_21_MASK 0xFFE00000
+
+/// D0F0xFC_x10
+typedef union {
+ struct { ///<
+ UINT32 BrExtIntrGrp:3; ///<
+ UINT32 Reserved_3_3:1; ///<
+ UINT32 BrExtIntrSwz:2; ///<
+ UINT32 Reserved_15_6:10; ///<
+ UINT32 BrIntIntrMap:5; ///<
+ UINT32 Reserved_31_21:11; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xFC_x10_STRUCT;
+
+// **** D0F0xB8 Register Definition ****
+// Address
+#define D0F0xB8_ADDRESS 0xb8
+
+// **** DxF0xE4_xC1 Register Definition ****
+// Address
+#define D2FxxE4_xC1_ADDRESS 0xc1
+
+// Type
+#define D2FxxE4_xC1_TYPE TYPE_D4F0xE4
+// Field Data
+
+#define D2FxxE4_xC1_StrapReverseLanes_OFFSET 0
+#define D2FxxE4_xC1_StrapReverseLanes_WIDTH 1
+#define D2FxxE4_xC1_StrapReverseLanes_MASK 0x1
+#define D2FxxE4_xC1_StrapE2EPrefixEn_OFFSET 1
+#define D2FxxE4_xC1_StrapE2EPrefixEn_WIDTH 1
+#define D2FxxE4_xC1_StrapE2EPrefixEn_MASK 0x2
+#define D2FxxE4_xC1_StrapExtendedFmtSupported_OFFSET 2
+#define D2FxxE4_xC1_StrapExtendedFmtSupported_WIDTH 1
+#define D2FxxE4_xC1_StrapExtendedFmtSupported_MASK 0x4
+#define D2FxxE4_xC1_Reserved_31_3_OFFSET 3
+#define D2FxxE4_xC1_Reserved_31_3_WIDTH 29
+#define D2FxxE4_xC1_Reserved_31_3_MASK 0xfffffff8
+
+// Type
+// Address
+#define D0F0xE4_WRAP_0046_ADDRESS 0x46
+
+// Address
+#define D0F0xE4_WRAP_8040_ADDRESS 0x8040
+
+
+// **** D0F0xE4_WRAP_8062 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8062_ADDRESS 0x8062
+
+
+/// D0F0xE4_WRAP_8062
+typedef union {
+ struct { ///<
+ UINT32 ReconfigureEn:1 ; ///<
+ UINT32 Reserved_1_1:1 ; ///<
+ UINT32 ResetPeriod:3 ; ///<
+ UINT32 Reserved_9_5:5 ; ///<
+ UINT32 BlockOnIdle:1 ; ///<
+ UINT32 ConfigXferMode:1 ; ///<
+ UINT32 Reserved_31_12:20; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8062_STRUCT;
+
+
+// Type
+#define D0F0xE4_WRAP_8040_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_8040_OwnSlice_OFFSET 0
+#define D0F0xE4_WRAP_8040_OwnSlice_WIDTH 1
+#define D0F0xE4_WRAP_8040_OwnSlice_MASK 0x1
+
+
+// **** D0F0xBC_x1F630 Register Definition ****
+// Address
+#define D0F0xBC_x1F630_ADDRESS 0x1f630
+
+// Type
+#define D0F0xBC_x1F630_TYPE TYPE_D0F0xBC
+// Field Data
+#define D0F0xBC_x1F630_RECONF_WRAPPER_OFFSET 8
+#define D0F0xBC_x1F630_RECONF_WRAPPER_WIDTH 8
+#define D0F0xBC_x1F630_RECONF_WRAPPER_MASK 0x00ff00
+
+
+// **** D0F0xE4_WRAP_8011 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8011_ADDRESS 0x8011
+// Type
+#define D0F0xE4_WRAP_8011_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_WRAP_8011_TxclkDynGateLatency_OFFSET 0
+#define D0F0xE4_WRAP_8011_TxclkDynGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8011_TxclkDynGateLatency_MASK 0x3F
+#define D0F0xE4_WRAP_8011_TxclkPermGateEven_OFFSET 6
+#define D0F0xE4_WRAP_8011_TxclkPermGateEven_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkPermGateEven_MASK 0x40
+#define D0F0xE4_WRAP_8011_TxclkDynGateEnable_OFFSET 7
+#define D0F0xE4_WRAP_8011_TxclkDynGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkDynGateEnable_MASK 0x80
+#define D0F0xE4_WRAP_8011_TxclkPermStop_OFFSET 8
+#define D0F0xE4_WRAP_8011_TxclkPermStop_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkPermStop_MASK 0x100
+#define D0F0xE4_WRAP_8011_TxclkRegsGateEnable_OFFSET 9
+#define D0F0xE4_WRAP_8011_TxclkRegsGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkRegsGateEnable_MASK 0x200
+#define D0F0xE4_WRAP_8011_TxclkRegsGateLatency_OFFSET 10
+#define D0F0xE4_WRAP_8011_TxclkRegsGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8011_TxclkRegsGateLatency_MASK 0xFC00
+#define D0F0xE4_WRAP_8011_Bitfield_16_16_OFFSET 16
+#define D0F0xE4_WRAP_8011_Bitfield_16_16_WIDTH 1
+#define D0F0xE4_WRAP_8011_Bitfield_16_16_MASK 0x10000
+#define D0F0xE4_WRAP_8011_TxclkPermGateLatency_OFFSET 17
+#define D0F0xE4_WRAP_8011_TxclkPermGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8011_TxclkPermGateLatency_MASK 0x7E0000
+#define D0F0xE4_WRAP_8011_Reserved_23_23_OFFSET 23
+#define D0F0xE4_WRAP_8011_Reserved_23_23_WIDTH 1
+#define D0F0xE4_WRAP_8011_Reserved_23_23_MASK 0x800000
+#define D0F0xE4_WRAP_8011_TxclkLcntGateEnable_OFFSET 24
+#define D0F0xE4_WRAP_8011_TxclkLcntGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkLcntGateEnable_MASK 0x1000000
+#define D0F0xE4_WRAP_8011_Reserved_25_25_OFFSET 25
+#define D0F0xE4_WRAP_8011_Reserved_25_25_WIDTH 1
+#define D0F0xE4_WRAP_8011_Reserved_25_25_MASK 0x2000000
+#define D0F0xE4_WRAP_8011_Reserved_31_26_OFFSET 26
+#define D0F0xE4_WRAP_8011_Reserved_31_26_WIDTH 6
+#define D0F0xE4_WRAP_8011_Reserved_31_26_MASK 0xFC000000
+
+/// D0F0xE4_WRAP_8011
+typedef union {
+ struct { ///<
+ UINT32 TxclkDynGateLatency:6; ///<
+ UINT32 TxclkPermGateEven:1; ///<
+ UINT32 TxclkDynGateEnable:1; ///<
+ UINT32 TxclkPermStop:1; ///<
+ UINT32 TxclkRegsGateEnable:1; ///<
+ UINT32 TxclkRegsGateLatency:6; ///<
+ UINT32 Bitfield_16_16:1; ///<
+ UINT32 TxclkPermGateLatency:6; ///<
+ UINT32 Reserved_23_23:1; ///<
+ UINT32 TxclkLcntGateEnable:1; ///<
+ UINT32 Reserved_25_25:1; ///<
+ UINT32 Reserved_31_26:6; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_WRAP_8011_STRUCT;
+
+
+
+// **** D0F0xE4_WRAP_8016 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8016_ADDRESS 0x8016
+
+// Type
+#define D0F0xE4_WRAP_8016_TYPE TYPE_D0F0xE4
+
+/// D0F0xE4_WRAP_8016
+typedef union {
+ struct { ///<
+ UINT32 CalibAckLatency:6 ; ///<
+ UINT32 Reserved_15_6:10; ///<
+ UINT32 LclkDynGateLatency:6 ; ///<
+ UINT32 LclkGateFree:1 ; ///<
+ UINT32 LclkDynGateEnable:1 ; ///<
+ UINT32 Reserved_31_24:8 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8016_STRUCT;
+
+
+// **** D0F0xE4_CORE_0011 Register Definition ****
+// Address
+#define D0F0xE4_CORE_0011_ADDRESS 0x11
+
+#define D0F0xE4_CORE_0011_DynClkLatency_OFFSET 0
+#define D0F0xE4_CORE_0011_DynClkLatency_WIDTH 4
+#define D0F0xE4_CORE_0011_DynClkLatency_MASK 0xf
+
+
+// **** D0F0xE4_PIF_0010 Register Definition ****
+// Address
+#define D0F0xE4_PIF_0010_ADDRESS 0x10
+
+// Type
+#define D0F0xE4_PIF_0010_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_PIF_0010_Reserved_3_0_OFFSET 0
+#define D0F0xE4_PIF_0010_Reserved_3_0_WIDTH 4
+#define D0F0xE4_PIF_0010_Reserved_3_0_MASK 0xf
+#define D0F0xE4_PIF_0010_EiDetCycleMode_OFFSET 4
+#define D0F0xE4_PIF_0010_EiDetCycleMode_WIDTH 1
+#define D0F0xE4_PIF_0010_EiDetCycleMode_MASK 0x10
+#define D0F0xE4_PIF_0010_Reserved_5_5_OFFSET 5
+#define D0F0xE4_PIF_0010_Reserved_5_5_WIDTH 1
+#define D0F0xE4_PIF_0010_Reserved_5_5_MASK 0x20
+#define D0F0xE4_PIF_0010_RxDetectFifoResetMode_OFFSET 6
+#define D0F0xE4_PIF_0010_RxDetectFifoResetMode_WIDTH 1
+#define D0F0xE4_PIF_0010_RxDetectFifoResetMode_MASK 0x40
+#define D0F0xE4_PIF_0010_RxDetectTxPwrMode_OFFSET 7
+#define D0F0xE4_PIF_0010_RxDetectTxPwrMode_WIDTH 1
+#define D0F0xE4_PIF_0010_RxDetectTxPwrMode_MASK 0x80
+#define D0F0xE4_PIF_0010_Reserved_16_8_OFFSET 8
+#define D0F0xE4_PIF_0010_Reserved_16_8_WIDTH 9
+#define D0F0xE4_PIF_0010_Reserved_16_8_MASK 0x1ff00
+#define D0F0xE4_PIF_0010_Ls2ExitTime_OFFSET 17
+#define D0F0xE4_PIF_0010_Ls2ExitTime_WIDTH 3
+#define D0F0xE4_PIF_0010_Ls2ExitTime_MASK 0xe0000
+#define D0F0xE4_PIF_0010_Reserved_31_23_OFFSET 23
+#define D0F0xE4_PIF_0010_Reserved_31_23_WIDTH 9
+#define D0F0xE4_PIF_0010_Reserved_31_23_MASK 0xff800000
+
+/// D0F0xE4_PIF_0010
+typedef union {
+ struct { ///<
+ UINT32 Reserved_3_0:4 ; ///<
+ UINT32 EiDetCycleMode:1 ; ///<
+ UINT32 Reserved_5_5:1 ; ///<
+ UINT32 RxDetectFifoResetMode:1 ; ///<
+ UINT32 RxDetectTxPwrMode:1 ; ///<
+ UINT32 Reserved_16_8:9 ; ///<
+ UINT32 Ls2ExitTime:3 ; ///<
+ UINT32 :3 ; ///<
+ UINT32 Reserved_31_23:9 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_PIF_0010_STRUCT;
+
+// **** D2FxxE4_xA4 Register Definition ****
+// Address
+#define D2FxxE4_xA4_ADDRESS 0xa4
+
+// Type
+#define D2FxxE4_xA4_TYPE TYPE_D4F0xE4
+// Field Data
+#define D2FxxE4_xA4_LcGen2EnStrap_OFFSET 0
+#define D2FxxE4_xA4_LcGen2EnStrap_WIDTH 1
+#define D2FxxE4_xA4_LcGen2EnStrap_MASK 0x1
+#define D2FxxE4_xA4_Reserved_5_1_OFFSET 1
+#define D2FxxE4_xA4_Reserved_5_1_WIDTH 5
+#define D2FxxE4_xA4_Reserved_5_1_MASK 0x3e
+#define D2FxxE4_xA4_LcForceDisSwSpeedChange_OFFSET 6
+#define D2FxxE4_xA4_LcForceDisSwSpeedChange_WIDTH 1
+#define D2FxxE4_xA4_LcForceDisSwSpeedChange_MASK 0x40
+#define D2FxxE4_xA4_Reserved_8_7_OFFSET 7
+#define D2FxxE4_xA4_Reserved_8_7_WIDTH 2
+#define D2FxxE4_xA4_Reserved_8_7_MASK 0x180
+#define D2FxxE4_xA4_LcInitiateLinkSpeedChange_OFFSET 9
+#define D2FxxE4_xA4_LcInitiateLinkSpeedChange_WIDTH 1
+#define D2FxxE4_xA4_LcInitiateLinkSpeedChange_MASK 0x200
+#define D2FxxE4_xA4_Reserved_11_10_OFFSET 10
+#define D2FxxE4_xA4_Reserved_11_10_WIDTH 2
+#define D2FxxE4_xA4_Reserved_11_10_MASK 0xc00
+#define D2FxxE4_xA4_LcSpeedChangeAttemptFailed_OFFSET 12
+#define D2FxxE4_xA4_LcSpeedChangeAttemptFailed_WIDTH 1
+#define D2FxxE4_xA4_LcSpeedChangeAttemptFailed_MASK 0x1000
+#define D2FxxE4_xA4_Reserved_18_13_OFFSET 13
+#define D2FxxE4_xA4_Reserved_18_13_WIDTH 6
+#define D2FxxE4_xA4_Reserved_18_13_MASK 0x7e000
+#define D2FxxE4_xA4_LcOtherSideSupportsGen2_OFFSET 19
+#define D2FxxE4_xA4_LcOtherSideSupportsGen2_WIDTH 1
+#define D2FxxE4_xA4_LcOtherSideSupportsGen2_MASK 0x80000
+#define D2FxxE4_xA4_Reserved_26_20_OFFSET 20
+#define D2FxxE4_xA4_Reserved_26_20_WIDTH 7
+#define D2FxxE4_xA4_Reserved_26_20_MASK 0x7f00000
+#define D2FxxE4_xA4_LcMultUpstreamAutoSpdChngEn_OFFSET 27
+#define D2FxxE4_xA4_LcMultUpstreamAutoSpdChngEn_WIDTH 1
+#define D2FxxE4_xA4_LcMultUpstreamAutoSpdChngEn_MASK 0x8000000
+#define D2FxxE4_xA4_Reserved_31_28_OFFSET 28
+#define D2FxxE4_xA4_Reserved_31_28_WIDTH 4
+#define D2FxxE4_xA4_Reserved_31_28_MASK 0xf0000000
+
+/// D2FxxE4_xA4
+typedef union {
+ struct { ///<
+ UINT32 LcGen2EnStrap:1 ; ///<
+ UINT32 Reserved_5_1:5 ; ///<
+ UINT32 LcForceDisSwSpeedChange:1 ; ///<
+ UINT32 Reserved_8_7:2 ; ///<
+ UINT32 LcInitiateLinkSpeedChange:1 ; ///<
+ UINT32 Reserved_11_10:2 ; ///<
+ UINT32 LcSpeedChangeAttemptFailed:1 ; ///<
+ UINT32 Reserved_18_13:6 ; ///<
+ UINT32 LcOtherSideSupportsGen2:1 ; ///<
+ UINT32 Reserved_26_20:7 ; ///<
+ UINT32 LcMultUpstreamAutoSpdChngEn:1 ; ///<
+ UINT32 Reserved_31_28:4 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D2FxxE4_xA4_STRUCT;
+
+
+// **** D2FxxE4_xC0 Register Definition ****
+// Address
+#define D2FxxE4_xC0_ADDRESS 0xc0
+
+// Type
+#define D2FxxE4_xC0_TYPE TYPE_D4F0xE4
+// Field Data
+#define D2FxxE4_xC0_Reserved_12_0_OFFSET 0
+#define D2FxxE4_xC0_Reserved_12_0_WIDTH 13
+#define D2FxxE4_xC0_Reserved_12_0_MASK 0x1fff
+#define D2FxxE4_xC0_StrapForceCompliance_OFFSET 13
+#define D2FxxE4_xC0_StrapForceCompliance_WIDTH 1
+#define D2FxxE4_xC0_StrapForceCompliance_MASK 0x2000
+#define D2FxxE4_xC0_Reserved_14_14_OFFSET 14
+#define D2FxxE4_xC0_Reserved_14_14_WIDTH 1
+#define D2FxxE4_xC0_Reserved_14_14_MASK 0x4000
+#define D2FxxE4_xC0_StrapAutoRcSpeedNegotiationDis_OFFSET 15
+#define D2FxxE4_xC0_StrapAutoRcSpeedNegotiationDis_WIDTH 1
+#define D2FxxE4_xC0_StrapAutoRcSpeedNegotiationDis_MASK 0x8000
+#define D2FxxE4_xC0_Reserved_31_16_OFFSET 16
+#define D2FxxE4_xC0_Reserved_31_16_WIDTH 16
+#define D2FxxE4_xC0_Reserved_31_16_MASK 0xffff0000
+
+/// D2FxxE4_xC0
+typedef union {
+ struct { ///<
+ UINT32 Reserved_12_0:13; ///<
+ UINT32 StrapForceCompliance:1 ; ///<
+ UINT32 Reserved_14_14:1 ; ///<
+ UINT32 StrapAutoRcSpeedNegotiationDis:1 ; ///<
+ UINT32 Reserved_31_16:16; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D2FxxE4_xC0_STRUCT;
+
+
+// **** D2Fxx88 Register Definition ****
+// Address
+#define D2Fxx88_ADDRESS 0x88
+
+// Type
+#define D2Fxx88_TYPE TYPE_D4F0
+// Field Data
+#define D2Fxx88_TargetLinkSpeed_OFFSET 0
+#define D2Fxx88_TargetLinkSpeed_WIDTH 4
+#define D2Fxx88_TargetLinkSpeed_MASK 0xf
+#define D2Fxx88_EnterCompliance_OFFSET 4
+#define D2Fxx88_EnterCompliance_WIDTH 1
+#define D2Fxx88_EnterCompliance_MASK 0x10
+#define D2Fxx88_HwAutonomousSpeedDisable_OFFSET 5
+#define D2Fxx88_HwAutonomousSpeedDisable_WIDTH 1
+#define D2Fxx88_HwAutonomousSpeedDisable_MASK 0x20
+#define D2Fxx88_SelectableDeemphasis_OFFSET 6
+#define D2Fxx88_SelectableDeemphasis_WIDTH 1
+#define D2Fxx88_SelectableDeemphasis_MASK 0x40
+#define D2Fxx88_XmitMargin_OFFSET 7
+#define D2Fxx88_XmitMargin_WIDTH 3
+#define D2Fxx88_XmitMargin_MASK 0x380
+#define D2Fxx88_EnterModCompliance_OFFSET 10
+#define D2Fxx88_EnterModCompliance_WIDTH 1
+#define D2Fxx88_EnterModCompliance_MASK 0x400
+#define D2Fxx88_ComplianceSOS_OFFSET 11
+#define D2Fxx88_ComplianceSOS_WIDTH 1
+#define D2Fxx88_ComplianceSOS_MASK 0x800
+#define D2Fxx88_ComplianceDeemphasis_OFFSET 12
+#define D2Fxx88_ComplianceDeemphasis_WIDTH 1
+#define D2Fxx88_ComplianceDeemphasis_MASK 0x1000
+#define D2Fxx88_Reserved_15_13_OFFSET 13
+#define D2Fxx88_Reserved_15_13_WIDTH 3
+#define D2Fxx88_Reserved_15_13_MASK 0xe000
+#define D2Fxx88_CurDeemphasisLevel_OFFSET 16
+#define D2Fxx88_CurDeemphasisLevel_WIDTH 1
+#define D2Fxx88_CurDeemphasisLevel_MASK 0x10000
+#define D2Fxx88_Reserved_31_17_OFFSET 17
+#define D2Fxx88_Reserved_31_17_WIDTH 15
+#define D2Fxx88_Reserved_31_17_MASK 0xfffe0000
+
+/// D2Fxx88
+typedef union {
+ struct { ///<
+ UINT32 TargetLinkSpeed:4 ; ///<
+ UINT32 EnterCompliance:1 ; ///<
+ UINT32 HwAutonomousSpeedDisable:1 ; ///<
+ UINT32 SelectableDeemphasis:1 ; ///<
+ UINT32 XmitMargin:3 ; ///<
+ UINT32 EnterModCompliance:1 ; ///<
+ UINT32 ComplianceSOS:1 ; ///<
+ UINT32 ComplianceDeemphasis:1 ; ///<
+ UINT32 Reserved_15_13:3 ; ///<
+ UINT32 CurDeemphasisLevel:1 ; ///<
+ UINT32 Reserved_31_17:15; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D2Fxx88_STRUCT;
+
+
+// **** D0F0xE4_WRAP_0803 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_0803_ADDRESS 0x803
+
+// Type
+#define D0F0xE4_WRAP_0803_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_0803_Reserved_4_0_OFFSET 0
+#define D0F0xE4_WRAP_0803_Reserved_4_0_WIDTH 5
+#define D0F0xE4_WRAP_0803_Reserved_4_0_MASK 0x1f
+#define D0F0xE4_WRAP_0803_StrapBifDeemphasisSel_OFFSET 5
+#define D0F0xE4_WRAP_0803_StrapBifDeemphasisSel_WIDTH 1
+#define D0F0xE4_WRAP_0803_StrapBifDeemphasisSel_MASK 0x20
+#define D0F0xE4_WRAP_0803_Reserved_31_6_OFFSET 6
+#define D0F0xE4_WRAP_0803_Reserved_31_6_WIDTH 26
+#define D0F0xE4_WRAP_0803_Reserved_31_6_MASK 0xffffffc0
+
+/// D0F0xE4_WRAP_0803
+typedef union {
+ struct { ///<
+ UINT32 Reserved_4_0:5 ; ///<
+ UINT32 StrapBifDeemphasisSel:1 ; ///<
+ UINT32 Reserved_31_6:26; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_0803_STRUCT;
+
+/*
+ * Needed by GnbNbInitLibV4.c
+ */
+
+// **** D0F0x60 Register Definition ****
+// Address
+#define D0F0x60_ADDRESS 0x60
+
+// **** D0F0x90 Register Definition ****
+// Address
+#define D0F0x90_ADDRESS 0x90
+
+// **** D0F0x64_x19 Register Definition ****
+// Address
+#define D0F0x64_x19_ADDRESS 0x19
+
+// **** D0F0x64_x1A Register Definition ****
+// Address
+#define D0F0x64_x1A_ADDRESS 0x1a
+
+
+
+
+
+/// D0F0xBC_x80010000
+typedef union {
+UINT32 Value; ///<
+} GRC1_STRUCT;
+
+
+
+
+
+
+// **** D0F0xE4_CORE_0010 Register Definition ****
+// Address
+#define D0F0xE4_CORE_0010_ADDRESS 0x10
+
+// Type
+#define D0F0xE4_CORE_0010_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_CORE_0010_HwInitWrLock_OFFSET 0
+#define D0F0xE4_CORE_0010_HwInitWrLock_WIDTH 1
+#define D0F0xE4_CORE_0010_HwInitWrLock_MASK 0x1
+#define D0F0xE4_CORE_0010_Reserved_8_1_OFFSET 1
+#define D0F0xE4_CORE_0010_Reserved_8_1_WIDTH 8
+#define D0F0xE4_CORE_0010_Reserved_8_1_MASK 0x1fe
+#define D0F0xE4_CORE_0010_UmiNpMemWrite_OFFSET 9
+#define D0F0xE4_CORE_0010_UmiNpMemWrite_WIDTH 1
+#define D0F0xE4_CORE_0010_UmiNpMemWrite_MASK 0x200
+#define D0F0xE4_CORE_0010_RxSbAdjPayloadSize_OFFSET 10
+#define D0F0xE4_CORE_0010_RxSbAdjPayloadSize_WIDTH 3
+#define D0F0xE4_CORE_0010_RxSbAdjPayloadSize_MASK 0x1c00
+#define D0F0xE4_CORE_0010_Reserved_31_13_OFFSET 13
+#define D0F0xE4_CORE_0010_Reserved_31_13_WIDTH 19
+#define D0F0xE4_CORE_0010_Reserved_31_13_MASK 0xffffe000
+
+/// D0F0xE4_CORE_0010
+typedef union {
+ struct { ///<
+ UINT32 HwInitWrLock:1 ; ///<
+ UINT32 Reserved_8_1:8 ; ///<
+ UINT32 UmiNpMemWrite:1 ; ///<
+ UINT32 RxSbAdjPayloadSize:3 ; ///<
+ UINT32 Reserved_31_13:19; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_CORE_0010_STRUCT;
+
+
+// **** D0F0x94 Register Definition ****
+// Address
+#define D0F0x94_ADDRESS 0x94
+
+
+// **** D0F0x98_x3A Register Definition ****
+// Address
+#define D0F0x98_x3A_ADDRESS 0x3a
+
+
+// **** D18F0x110 Register Definition ****
+// Address
+#define D18F0x110_ADDRESS 0x110
+
+
+// **** D0F0x98_x06 Register Definition ****
+// Address
+#define D0F0x98_x06_ADDRESS 0x6
+
+#define D0F0x98_x06_UmiNpMemWrEn_OFFSET 26
+#define D0F0x98_x06_UmiNpMemWrEn_WIDTH 1
+#define D0F0x98_x06_UmiNpMemWrEn_MASK 0x4000000
+
+/*
+ * Needed by GnbNbInitLibV4.c - end
+ */
+
+/*
+ * Needed by GnbIommuScratch.c
+ */
+
+
+
+
+/*
+ * Needed by GnbIommuScratch.c - end
+ */
+
+/*
+ * Needed by GnbIoapic.c
+ */
+
+
+// **** D0F0xF8 Register Definition ****
+// Address
+#define D0F0xF8_ADDRESS 0xf8
+
+// **** D0F0xFC_x00 Register Definition ****
+// Address
+#define D0F0xFC_x00_ADDRESS 0x0
+
+// Type
+#define D0F0xFC_x00_TYPE TYPE_D0F0xFC
+// Field Data
+#define D0F0xFC_x00_IoapicEnable_OFFSET 0
+#define D0F0xFC_x00_IoapicEnable_WIDTH 1
+#define D0F0xFC_x00_IoapicEnable_MASK 0x01
+#define D0F0xFC_x00_Reserved_1_1_OFFSET 2
+#define D0F0xFC_x00_Reserved_1_1_WIDTH 1
+#define D0F0xFC_x00_Reserved_1_1_MASK 0x02
+#define D0F0xFC_x00_IoapicIdExtEn_OFFSET 3
+#define D0F0xFC_x00_IoapicIdExtEn_WIDTH 1
+#define D0F0xFC_x00_IoapicIdExtEn_MASK 0x04
+#define D0F0xFC_x00_Reserved_3_3_OFFSET 4
+#define D0F0xFC_x00_Reserved_3_3_WIDTH 1
+#define D0F0xFC_x00_Reserved_3_3_MASK 0x08
+#define D0F0xFC_x00_IoapicSbFeatureEn_OFFSET 4
+#define D0F0xFC_x00_IoapicSbFeatureEn_WIDTH 1
+#define D0F0xFC_x00_IoapicSbFeatureEn_MASK 0x10
+#define D0F0xFC_x00_Reserved_31_5_OFFSET 5
+#define D0F0xFC_x00_Reserved_31_5_WIDTH 27
+#define D0F0xFC_x00_Reserved_31_5_MASK 0xffffffe0
+
+/// D0F0xFC_x00
+typedef union {
+ struct { ///<
+ UINT32 IoapicEnable:1 ; ///<
+ UINT32 Reserved_1_1:1 ; ///<
+ UINT32 IoapicIdExtEn:1 ; ///<
+ UINT32 Reserved_3_3:1 ; ///<
+ UINT32 IoapicSbFeatureEn:1 ; ///<
+ UINT32 Reserved_31_5:27; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xFC_x00_STRUCT;
+
+/*
+ * Needed by GnbIoapic.c - end
+ */
+
+/*
+ * Needed by GnbPcieInitLibV5
+ */
+
+
+// **** D0F0xE4_WRAP_8021 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8021_ADDRESS 0x8021
+
+
+// **** D0F0xCC_x01 Register Definition ****
+// Address
+#define D0F0xCC_x01_ADDRESS 0x1
+
+// Type
+#define D0F0xCC_x01_TYPE TYPE_D0F0xCC
+// Field Data
+#define D0F0xCC_x01_BridgeDis_OFFSET 0
+#define D0F0xCC_x01_BridgeDis_WIDTH 1
+#define D0F0xCC_x01_BridgeDis_MASK 0x1
+#define D0F0xCC_x01_Reserved_1_1_OFFSET 1
+#define D0F0xCC_x01_Reserved_1_1_WIDTH 1
+#define D0F0xCC_x01_Reserved_1_1_MASK 0x2
+#define D0F0xCC_x01_CfgDis_OFFSET 2
+#define D0F0xCC_x01_CfgDis_WIDTH 1
+#define D0F0xCC_x01_CfgDis_MASK 0x4
+#define D0F0xCC_x01_P2pDis_OFFSET 3
+#define D0F0xCC_x01_P2pDis_WIDTH 1
+#define D0F0xCC_x01_P2pDis_MASK 0x8
+#define D0F0xCC_x01_Reserved_15_4_OFFSET 4
+#define D0F0xCC_x01_Reserved_15_4_WIDTH 12
+#define D0F0xCC_x01_Reserved_15_4_MASK 0xfff0
+#define D0F0xCC_x01_ExtDevPlug_OFFSET 16
+#define D0F0xCC_x01_ExtDevPlug_WIDTH 1
+#define D0F0xCC_x01_ExtDevPlug_MASK 0x10000
+#define D0F0xCC_x01_ExtDevCsrEn_OFFSET 17
+#define D0F0xCC_x01_ExtDevCsrEn_WIDTH 1
+#define D0F0xCC_x01_ExtDevCsrEn_MASK 0x20000
+#define D0F0xCC_x01_CsrEnable_OFFSET 18
+#define D0F0xCC_x01_CsrEnable_WIDTH 1
+#define D0F0xCC_x01_CsrEnable_MASK 0x40000
+#define D0F0xCC_x01_SetPowEn_OFFSET 20
+#define D0F0xCC_x01_SetPowEn_WIDTH 1
+#define D0F0xCC_x01_SetPowEn_MASK 0x100000
+#define D0F0xCC_x01_Reserved_22_21_OFFSET 21
+#define D0F0xCC_x01_Reserved_22_21_WIDTH 2
+#define D0F0xCC_x01_Reserved_22_21_MASK 0x600000
+#define D0F0xCC_x01_ApicEnable_OFFSET 23
+#define D0F0xCC_x01_ApicEnable_WIDTH 1
+#define D0F0xCC_x01_ApicEnable_MASK 0x800000
+#define D0F0xCC_x01_ApicRange_OFFSET 24
+#define D0F0xCC_x01_ApicRange_WIDTH 8
+#define D0F0xCC_x01_ApicRange_MASK 0xff000000
+
+/// D0F0xCC_x1
+typedef union {
+ struct { ///<
+ UINT32 BridgeDis:1 ; ///<
+ UINT32 Reserved_1_1:2 ; ///<
+ UINT32 CfgDis:1 ; ///<
+ UINT32 P2pDis:1 ; ///<
+ UINT32 Reserved_15_4:12; ///<
+ UINT32 ExtDevPlug:1 ; ///<
+ UINT32 ExtDevCsrEn:1 ; ///<
+ UINT32 CsrEnable:1 ; ///<
+ UINT32 Reserved_19_19:1 ; ///<
+ UINT32 SetPowEn:1 ; ///<
+ UINT32 Reserved_22_21:2 ; ///<
+ UINT32 ApicEnable:1 ; ///<
+ UINT32 ApicRange:8 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xCC_x01_STRUCT;
+
+
+// **** D0F0xC8 Register Definition ****
+// Address
+#define D0F0xC8_ADDRESS 0xc8
+
+// Type
+#define D0F0xC8_TYPE TYPE_D0F0
+// Field Data
+#define D0F0xC8_NB_DEV_IND_ADDR_OFFSET 0
+#define D0F0xC8_NB_DEV_IND_ADDR_WIDTH 7
+#define D0F0xC8_NB_DEV_IND_ADDR_MASK 0x7F
+#define D0F0xC8_Reserved_15_7_OFFSET 7
+#define D0F0xC8_Reserved_15_7_WIDTH 9
+#define D0F0xC8_Reserved_15_7_MASK 0xFF80
+#define D0F0xC8_NB_DEV_IND_SEL_OFFSET 16
+#define D0F0xC8_NB_DEV_IND_SEL_WIDTH 8
+#define D0F0xC8_NB_DEV_IND_SEL_MASK 0xFF0000
+#define D0F0xC8_Reserved_31_24_OFFSET 24
+#define D0F0xC8_Reserved_31_24_WIDTH 8
+#define D0F0xC8_Reserved_31_24_MASK 0xFF000000
+
+/// D0F0xC8
+typedef union {
+ struct { ///<
+ UINT32 NB_DEV_IND_ADDR:7; ///<
+ UINT32 Reserved_15_7:9; ///<
+ UINT32 NB_DEV_IND_SEL:8; ///<
+ UINT32 Reserved_31_24:8; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xC8_STRUCT;
+
+
+
+#ifdef _GNBPCIEINITLIBV4_H_
+
+// **** D0F0xE4_WRAP_8014 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8014_ADDRESS 0x8014
+
+
+/// D0F0xE4_WRAP_8014
+typedef union {
+ struct { ///<
+ UINT32 TxclkPermGateEnable:1 ; ///<
+ UINT32 TxclkPrbsGateEnable:1 ; ///<
+ UINT32 DdiGatePifA1xEnable:1 ; ///<
+ UINT32 DdiGatePifB1xEnable:1 ; ///<
+ UINT32 DdiGatePifC1xEnable:1 ; ///<
+ UINT32 DdiGatePifD1xEnable:1 ; ///<
+ UINT32 Reserved_7_6:2 ; ///<
+ UINT32 DdiGatePifA2p5xEnable:1 ; ///<
+ UINT32 DdiGatePifB2p5xEnable:1 ; ///<
+ UINT32 DdiGatePifC2p5xEnable:1 ; ///<
+ UINT32 DdiGatePifD2p5xEnable:1 ; ///<
+ UINT32 PcieGatePifA1xEnable:1 ; ///<
+ UINT32 PcieGatePifB1xEnable:1 ; ///<
+ UINT32 PcieGatePifC1xEnable:1 ; ///<
+ UINT32 PcieGatePifD1xEnable:1 ; ///<
+ UINT32 PcieGatePifA2p5xEnable:1 ; ///<
+ UINT32 PcieGatePifB2p5xEnable:1 ; ///<
+ UINT32 PcieGatePifC2p5xEnable:1 ; ///<
+ UINT32 PcieGatePifD2p5xEnable:1 ; ///<
+ UINT32 TxclkPermGateOnlyWhenPllPwrDn:1 ; ///<
+ UINT32 Reserved_23_21:3 ; ///<
+ UINT32 DdiGateDigAEnable:1 ; ///<
+ UINT32 DdiGateDigBEnable:1 ; ///<
+ UINT32 DdiGateDigCEnable:1 ; ///<
+ UINT32 DdiGateDigDEnable:1 ; ///<
+ UINT32 SpareRegRw:4 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8014_STRUCT;
+
+#endif
+
+#ifdef _GNBPCIEINITLIBV5_H_ // KV version of WRAP_8014
+
+// **** D0F0xE4_WRAP_8014 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8014_ADDRESS 0x8014
+
+// Type
+#define D0F0xE4_WRAP_8014_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_8014_TxclkPermGateEnable_OFFSET 0
+#define D0F0xE4_WRAP_8014_TxclkPermGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_TxclkPermGateEnable_MASK 0x1
+#define D0F0xE4_WRAP_8014_TxclkPrbsGateEnable_OFFSET 1
+#define D0F0xE4_WRAP_8014_TxclkPrbsGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_TxclkPrbsGateEnable_MASK 0x2
+#define D0F0xE4_WRAP_8014_DdiPifa1xGateEnable_OFFSET 2
+#define D0F0xE4_WRAP_8014_DdiPifa1xGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_DdiPifa1xGateEnable_MASK 0x4
+#define D0F0xE4_WRAP_8014_DdiPifb1xGateEnable_OFFSET 3
+#define D0F0xE4_WRAP_8014_DdiPifb1xGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_DdiPifb1xGateEnable_MASK 0x8
+#define D0F0xE4_WRAP_8014_DdiPifc1xGateEnable_OFFSET 4
+#define D0F0xE4_WRAP_8014_DdiPifc1xGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_DdiPifc1xGateEnable_MASK 0x10
+#define D0F0xE4_WRAP_8014_DdiPifd1xGateEnable_OFFSET 5
+#define D0F0xE4_WRAP_8014_DdiPifd1xGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_DdiPifd1xGateEnable_MASK 0x20
+#define D0F0xE4_WRAP_8014_Reserved_11_6_OFFSET 6
+#define D0F0xE4_WRAP_8014_Reserved_11_6_WIDTH 6
+#define D0F0xE4_WRAP_8014_Reserved_11_6_MASK 0xfc0
+#define D0F0xE4_WRAP_8014_PcieGatePifA1xEnable_OFFSET 12
+#define D0F0xE4_WRAP_8014_PcieGatePifA1xEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_PcieGatePifA1xEnable_MASK 0x1000
+#define D0F0xE4_WRAP_8014_PcieGatePifB1xEnable_OFFSET 13
+#define D0F0xE4_WRAP_8014_PcieGatePifB1xEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_PcieGatePifB1xEnable_MASK 0x2000
+#define D0F0xE4_WRAP_8014_PcieGatePifC1xEnable_OFFSET 14
+#define D0F0xE4_WRAP_8014_PcieGatePifC1xEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_PcieGatePifC1xEnable_MASK 0x4000
+#define D0F0xE4_WRAP_8014_PcieGatePifD1xEnable_OFFSET 15
+#define D0F0xE4_WRAP_8014_PcieGatePifD1xEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_PcieGatePifD1xEnable_MASK 0x8000
+#define D0F0xE4_WRAP_8014_Reserved_19_16_OFFSET 16
+#define D0F0xE4_WRAP_8014_Reserved_19_16_WIDTH 4
+#define D0F0xE4_WRAP_8014_Reserved_19_16_MASK 0xf0000
+#define D0F0xE4_WRAP_8014_TxclkPermGateOnlyWhenPllPwrDn_OFFSET 20
+#define D0F0xE4_WRAP_8014_TxclkPermGateOnlyWhenPllPwrDn_WIDTH 1
+#define D0F0xE4_WRAP_8014_TxclkPermGateOnlyWhenPllPwrDn_MASK 0x100000
+#define D0F0xE4_WRAP_8014_Reserved_23_21_OFFSET 21
+#define D0F0xE4_WRAP_8014_Reserved_23_21_WIDTH 3
+#define D0F0xE4_WRAP_8014_Reserved_23_21_MASK 0xe00000
+#define D0F0xE4_WRAP_8014_DdiDigaGateEnable_OFFSET 24
+#define D0F0xE4_WRAP_8014_DdiDigaGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_DdiDigaGateEnable_MASK 0x1000000
+#define D0F0xE4_WRAP_8014_DdiDigbGateEnable_OFFSET 25
+#define D0F0xE4_WRAP_8014_DdiDigbGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_DdiDigbGateEnable_MASK 0x2000000
+#define D0F0xE4_WRAP_8014_DdiDigcGateEnable_OFFSET 26
+#define D0F0xE4_WRAP_8014_DdiDigcGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_DdiDigcGateEnable_MASK 0x4000000
+#define D0F0xE4_WRAP_8014_DdiDigdGateEnable_OFFSET 27
+#define D0F0xE4_WRAP_8014_DdiDigdGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_DdiDigdGateEnable_MASK 0x8000000
+#define D0F0xE4_WRAP_8014_SpareRegRw_OFFSET 28
+#define D0F0xE4_WRAP_8014_SpareRegRw_WIDTH 4
+#define D0F0xE4_WRAP_8014_SpareRegRw_MASK 0xf0000000
+
+/// D0F0xE4_WRAP_8014
+typedef union {
+ struct { ///<
+ UINT32 TxclkPermGateEnable:1 ; ///<
+ UINT32 TxclkPrbsGateEnable:1 ; ///<
+ UINT32 DdiPifa1xGateEnable:1 ; ///<
+ UINT32 DdiPifb1xGateEnable:1 ; ///<
+ UINT32 DdiPifc1xGateEnable:1 ; ///<
+ UINT32 DdiPifd1xGateEnable:1 ; ///<
+ UINT32 Reserved_11_6:6 ; ///<
+ UINT32 PcieGatePifA1xEnable:1 ; ///<
+ UINT32 PcieGatePifB1xEnable:1 ; ///<
+ UINT32 PcieGatePifC1xEnable:1 ; ///<
+ UINT32 PcieGatePifD1xEnable:1 ; ///<
+ UINT32 Reserved_19_16:4 ; ///<
+ UINT32 TxclkPermGateOnlyWhenPllPwrDn:1 ; ///<
+ UINT32 Reserved_23_21:3 ; ///<
+ UINT32 DdiDigaGateEnable:1 ; ///<
+ UINT32 DdiDigbGateEnable:1 ; ///<
+ UINT32 DdiDigcGateEnable:1 ; ///<
+ UINT32 DdiDigdGateEnable:1 ; ///<
+ UINT32 SpareRegRw:4 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8014_STRUCT;
+
+// **** D0F0xE4_WRAP_8029 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8029_ADDRESS 0x8029
+// Type
+#define D0F0xE4_WRAP_8029_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_WRAP_8029_LaneEnable_OFFSET 0
+#define D0F0xE4_WRAP_8029_LaneEnable_WIDTH 16
+#define D0F0xE4_WRAP_8029_LaneEnable_MASK 0xFFFF
+#define D0F0xE4_WRAP_8029_Reserved_31_16_OFFSET 16
+#define D0F0xE4_WRAP_8029_Reserved_31_16_WIDTH 16
+#define D0F0xE4_WRAP_8029_Reserved_31_16_MASK 0xFFFF0000
+
+/// D0F0xE4_WRAP_8029
+typedef union {
+ struct { ///<
+ UINT32 LaneEnable:16; ///<
+ UINT32 Reserved_31_16:16; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_WRAP_8029_STRUCT;
+
+#endif
+
+#ifdef _GNBPCIETRAININGV2_H_
+
+// **** DxFxx68 Register Definition ****
+// Address
+#define DxFxx68_ADDRESS 0x68
+// Type
+#define DxFxx68_TYPE TYPE_D2F1
+
+// Field Data
+#define DxFxx68_PmControl_OFFSET 0
+#define DxFxx68_PmControl_WIDTH 2
+#define DxFxx68_PmControl_MASK 0x3
+#define DxFxx68_Reserved_2_2_OFFSET 2
+#define DxFxx68_Reserved_2_2_WIDTH 1
+#define DxFxx68_Reserved_2_2_MASK 0x4
+#define DxFxx68_ReadCplBoundary_OFFSET 3
+#define DxFxx68_ReadCplBoundary_WIDTH 1
+#define DxFxx68_ReadCplBoundary_MASK 0x8
+#define DxFxx68_LinkDis_OFFSET 4
+#define DxFxx68_LinkDis_WIDTH 1
+#define DxFxx68_LinkDis_MASK 0x10
+#define DxFxx68_RetrainLink_OFFSET 5
+#define DxFxx68_RetrainLink_WIDTH 1
+#define DxFxx68_RetrainLink_MASK 0x20
+#define DxFxx68_CommonClockCfg_OFFSET 6
+#define DxFxx68_CommonClockCfg_WIDTH 1
+#define DxFxx68_CommonClockCfg_MASK 0x40
+#define DxFxx68_ExtendedSync_OFFSET 7
+#define DxFxx68_ExtendedSync_WIDTH 1
+#define DxFxx68_ExtendedSync_MASK 0x80
+#define DxFxx68_ClockPowerManagementEn_OFFSET 8
+#define DxFxx68_ClockPowerManagementEn_WIDTH 1
+#define DxFxx68_ClockPowerManagementEn_MASK 0x100
+#define DxFxx68_HWAutonomousWidthDisable_OFFSET 9
+#define DxFxx68_HWAutonomousWidthDisable_WIDTH 1
+#define DxFxx68_HWAutonomousWidthDisable_MASK 0x200
+#define DxFxx68_LinkBWManagementEn_OFFSET 10
+#define DxFxx68_LinkBWManagementEn_WIDTH 1
+#define DxFxx68_LinkBWManagementEn_MASK 0x400
+#define DxFxx68_LinkAutonomousBWIntEn_OFFSET 11
+#define DxFxx68_LinkAutonomousBWIntEn_WIDTH 1
+#define DxFxx68_LinkAutonomousBWIntEn_MASK 0x800
+#define DxFxx68_Reserved_15_12_OFFSET 12
+#define DxFxx68_Reserved_15_12_WIDTH 4
+#define DxFxx68_Reserved_15_12_MASK 0xF000
+#define DxFxx68_LinkSpeed_OFFSET 16
+#define DxFxx68_LinkSpeed_WIDTH 4
+#define DxFxx68_LinkSpeed_MASK 0xF0000
+#define DxFxx68_NegotiatedLinkWidth_OFFSET 20
+#define DxFxx68_NegotiatedLinkWidth_WIDTH 6
+#define DxFxx68_NegotiatedLinkWidth_MASK 0x3F00000
+#define DxFxx68_Reserved_26_26_OFFSET 26
+#define DxFxx68_Reserved_26_26_WIDTH 1
+#define DxFxx68_Reserved_26_26_MASK 0x4000000
+#define DxFxx68_LinkTraining_OFFSET 27
+#define DxFxx68_LinkTraining_WIDTH 1
+#define DxFxx68_LinkTraining_MASK 0x8000000
+#define DxFxx68_SlotClockCfg_OFFSET 28
+#define DxFxx68_SlotClockCfg_WIDTH 1
+#define DxFxx68_SlotClockCfg_MASK 0x10000000
+#define DxFxx68_DlActive_OFFSET 29
+#define DxFxx68_DlActive_WIDTH 1
+#define DxFxx68_DlActive_MASK 0x20000000
+#define DxFxx68_LinkBWManagementStatus_OFFSET 30
+#define DxFxx68_LinkBWManagementStatus_WIDTH 1
+#define DxFxx68_LinkBWManagementStatus_MASK 0x40000000
+#define DxFxx68_LinkAutonomousBWStatus_OFFSET 31
+#define DxFxx68_LinkAutonomousBWStatus_WIDTH 1
+#define DxFxx68_LinkAutonomousBWStatus_MASK 0x80000000
+
+/// DxFxx68
+typedef union {
+ struct { ///<
+ UINT32 PmControl:2; ///<
+ UINT32 Reserved_2_2:1; ///<
+ UINT32 ReadCplBoundary:1; ///<
+ UINT32 LinkDis:1; ///<
+ UINT32 RetrainLink:1; ///<
+ UINT32 CommonClockCfg:1; ///<
+ UINT32 ExtendedSync:1; ///<
+ UINT32 ClockPowerManagementEn:1; ///<
+ UINT32 HWAutonomousWidthDisable:1; ///<
+ UINT32 LinkBWManagementEn:1; ///<
+ UINT32 LinkAutonomousBWIntEn:1; ///<
+ UINT32 Reserved_15_12:4; ///<
+ UINT32 LinkSpeed:4; ///<
+ UINT32 NegotiatedLinkWidth:6; ///<
+ UINT32 Reserved_26_26:1; ///<
+ UINT32 LinkTraining:1; ///<
+ UINT32 SlotClockCfg:1; ///<
+ UINT32 DlActive:1; ///<
+ UINT32 LinkBWManagementStatus:1; ///<
+ UINT32 LinkAutonomousBWStatus:1; ///<
+
+ } Field;
+
+ UINT32 Value;
+} DxFxx68_STRUCT;
+
+// **** D0F0xE4_WRAP_0800 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_0800_ADDRESS 0x800
+// Type
+#define D0F0xE4_WRAP_0800_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_WRAP_0800_HoldTraining_OFFSET 0
+#define D0F0xE4_WRAP_0800_HoldTraining_WIDTH 1
+#define D0F0xE4_WRAP_0800_HoldTraining_MASK 0x1
+#define D0F0xE4_WRAP_0800_Reserved_31_1_OFFSET 1
+#define D0F0xE4_WRAP_0800_Reserved_31_1_WIDTH 31
+#define D0F0xE4_WRAP_0800_Reserved_31_1_MASK 0xFFFFFFFE
+
+/// D0F0xE4_WRAP_0800
+typedef union {
+ struct { ///<
+ UINT32 HoldTraining:1; ///<
+ UINT32 Reserved_31_1:31; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_WRAP_0800_STRUCT;
+
+// **** DxFxx128 Register Definition ****
+// Address
+#define DxFxx128_ADDRESS 0x128
+// Type
+#define DxFxx128_TYPE TYPE_D2F1
+
+// Field Data
+#define DxFxx128_Reserved_15_0_OFFSET 0
+#define DxFxx128_Reserved_15_0_WIDTH 16
+#define DxFxx128_Reserved_15_0_MASK 0xFFFF
+#define DxFxx128_PortArbTableStatus_OFFSET 16
+#define DxFxx128_PortArbTableStatus_WIDTH 1
+#define DxFxx128_PortArbTableStatus_MASK 0x10000
+#define DxFxx128_VcNegotiationPending_OFFSET 17
+#define DxFxx128_VcNegotiationPending_WIDTH 1
+#define DxFxx128_VcNegotiationPending_MASK 0x20000
+#define DxFxx128_Reserved_31_18_OFFSET 18
+#define DxFxx128_Reserved_31_18_WIDTH 14
+#define DxFxx128_Reserved_31_18_MASK 0xFFFC0000
+
+/// DxFxx128
+typedef union {
+ struct { ///<
+ UINT32 Reserved_15_0:16; ///<
+ UINT32 PortArbTableStatus:1; ///<
+ UINT32 VcNegotiationPending:1; ///<
+ UINT32 Reserved_31_18:14; ///<
+
+ } Field;
+
+ UINT32 Value;
+} DxFxx128_STRUCT;
+
+// **** DxFxx18 Register Definition ****
+// Address
+#define DxFxx18_ADDRESS 0x18
+// Type
+#define DxFxx18_TYPE TYPE_D2F1
+
+// **** DxFxx20 Register Definition ****
+// Address
+#define DxFxx20_ADDRESS 0x20
+// Type
+#define DxFxx20_TYPE TYPE_D2F1
+
+// **** DxFxx24 Register Definition ****
+// Address
+#define DxFxx24_ADDRESS 0x24
+// Type
+#define DxFxx24_TYPE TYPE_D2F1
+
+// **** D0F0x04 Register Definition ****
+// Address
+#define D0F0x04_ADDRESS 0x4
+// Type
+#define D0F0x04_TYPE TYPE_D0F0
+
+// Field Data
+#define D0F0x04_IoAccessEn_OFFSET 0
+#define D0F0x04_IoAccessEn_WIDTH 1
+#define D0F0x04_IoAccessEn_MASK 0x1
+#define D0F0x04_MemAccessEn_OFFSET 1
+#define D0F0x04_MemAccessEn_WIDTH 1
+#define D0F0x04_MemAccessEn_MASK 0x2
+#define D0F0x04_BusMasterEn_OFFSET 2
+#define D0F0x04_BusMasterEn_WIDTH 1
+#define D0F0x04_BusMasterEn_MASK 0x4
+#define D0F0x04_Reserved_19_3_OFFSET 3
+#define D0F0x04_Reserved_19_3_WIDTH 17
+#define D0F0x04_Reserved_19_3_MASK 0xFFFF8
+#define D0F0x04_CapList_OFFSET 20
+#define D0F0x04_CapList_WIDTH 1
+#define D0F0x04_CapList_MASK 0x100000
+#define D0F0x04_Reserved_31_21_OFFSET 21
+#define D0F0x04_Reserved_31_21_WIDTH 11
+#define D0F0x04_Reserved_31_21_MASK 0xFFE00000
+
+/// D0F0x04
+typedef union {
+ struct { ///<
+ UINT32 IoAccessEn:1; ///<
+ UINT32 MemAccessEn:1; ///<
+ UINT32 BusMasterEn:1; ///<
+ UINT32 Reserved_19_3:17; ///<
+ UINT32 CapList:1; ///<
+ UINT32 Reserved_31_21:11; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x04_STRUCT;
+
+#endif
+
+// **** D0F0xE4_PIF_0011 Register Definition ****
+// Address
+#define D0F0xE4_PIF_0011_ADDRESS 0x11
+
+// Type
+#define D0F0xE4_PIF_0011_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_PIF_0011_X2Lane10_OFFSET 0
+#define D0F0xE4_PIF_0011_X2Lane10_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane10_MASK 0x1
+#define D0F0xE4_PIF_0011_X2Lane32_OFFSET 1
+#define D0F0xE4_PIF_0011_X2Lane32_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane32_MASK 0x2
+#define D0F0xE4_PIF_0011_X2Lane54_OFFSET 2
+#define D0F0xE4_PIF_0011_X2Lane54_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane54_MASK 0x4
+#define D0F0xE4_PIF_0011_X2Lane76_OFFSET 3
+#define D0F0xE4_PIF_0011_X2Lane76_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane76_MASK 0x8
+#define D0F0xE4_PIF_0011_X2Lane98_OFFSET 4
+#define D0F0xE4_PIF_0011_X2Lane98_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane98_MASK 0x10
+#define D0F0xE4_PIF_0011_X2Lane1110_OFFSET 5
+#define D0F0xE4_PIF_0011_X2Lane1110_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane1110_MASK 0x20
+#define D0F0xE4_PIF_0011_X2Lane1312_OFFSET 6
+#define D0F0xE4_PIF_0011_X2Lane1312_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane1312_MASK 0x40
+#define D0F0xE4_PIF_0011_X2Lane1514_OFFSET 7
+#define D0F0xE4_PIF_0011_X2Lane1514_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane1514_MASK 0x80
+#define D0F0xE4_PIF_0011_X4Lane30_OFFSET 8
+#define D0F0xE4_PIF_0011_X4Lane30_WIDTH 1
+#define D0F0xE4_PIF_0011_X4Lane30_MASK 0x100
+#define D0F0xE4_PIF_0011_X4Lane74_OFFSET 9
+#define D0F0xE4_PIF_0011_X4Lane74_WIDTH 1
+#define D0F0xE4_PIF_0011_X4Lane74_MASK 0x200
+#define D0F0xE4_PIF_0011_X4Lane118_OFFSET 10
+#define D0F0xE4_PIF_0011_X4Lane118_WIDTH 1
+#define D0F0xE4_PIF_0011_X4Lane118_MASK 0x400
+#define D0F0xE4_PIF_0011_X4Lane1512_OFFSET 11
+#define D0F0xE4_PIF_0011_X4Lane1512_WIDTH 1
+#define D0F0xE4_PIF_0011_X4Lane1512_MASK 0x800
+#define D0F0xE4_PIF_0011_Reserved_15_12_OFFSET 12
+#define D0F0xE4_PIF_0011_Reserved_15_12_WIDTH 4
+#define D0F0xE4_PIF_0011_Reserved_15_12_MASK 0xf000
+#define D0F0xE4_PIF_0011_X8Lane70_OFFSET 16
+#define D0F0xE4_PIF_0011_X8Lane70_WIDTH 1
+#define D0F0xE4_PIF_0011_X8Lane70_MASK 0x10000
+#define D0F0xE4_PIF_0011_X8Lane158_OFFSET 17
+#define D0F0xE4_PIF_0011_X8Lane158_WIDTH 1
+#define D0F0xE4_PIF_0011_X8Lane158_MASK 0x20000
+#define D0F0xE4_PIF_0011_Reserved_19_18_OFFSET 18
+#define D0F0xE4_PIF_0011_Reserved_19_18_WIDTH 2
+#define D0F0xE4_PIF_0011_Reserved_19_18_MASK 0xc0000
+#define D0F0xE4_PIF_0011_X16Lane150_OFFSET 20
+#define D0F0xE4_PIF_0011_X16Lane150_WIDTH 1
+#define D0F0xE4_PIF_0011_X16Lane150_MASK 0x100000
+#define D0F0xE4_PIF_0011_Reserved_24_21_OFFSET 21
+#define D0F0xE4_PIF_0011_Reserved_24_21_WIDTH 4
+#define D0F0xE4_PIF_0011_Reserved_24_21_MASK 0x1e00000
+#define D0F0xE4_PIF_0011_MultiPif_OFFSET 25
+#define D0F0xE4_PIF_0011_MultiPif_WIDTH 1
+#define D0F0xE4_PIF_0011_MultiPif_MASK 0x2000000
+#define D0F0xE4_PIF_0011_Reserved_31_26_OFFSET 26
+#define D0F0xE4_PIF_0011_Reserved_31_26_WIDTH 6
+#define D0F0xE4_PIF_0011_Reserved_31_26_MASK 0xfc000000
+
+/// D0F0xE4_PIF_0011
+typedef union {
+ struct { ///<
+ UINT32 X2Lane10:1 ; ///<
+ UINT32 X2Lane32:1 ; ///<
+ UINT32 X2Lane54:1 ; ///<
+ UINT32 X2Lane76:1 ; ///<
+ UINT32 X2Lane98:1 ; ///<
+ UINT32 X2Lane1110:1 ; ///<
+ UINT32 X2Lane1312:1 ; ///<
+ UINT32 X2Lane1514:1 ; ///<
+ UINT32 X4Lane30:1 ; ///<
+ UINT32 X4Lane74:1 ; ///<
+ UINT32 X4Lane118:1 ; ///<
+ UINT32 X4Lane1512:1 ; ///<
+ UINT32 Reserved_15_12:4 ; ///<
+ UINT32 X8Lane70:1 ; ///<
+ UINT32 X8Lane158:1 ; ///<
+ UINT32 Reserved_19_18:2 ; ///<
+ UINT32 X16Lane150:1 ; ///<
+ UINT32 Reserved_24_21:4 ; ///<
+ UINT32 MultiPif:1 ; ///<
+ UINT32 Reserved_31_26:6 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_PIF_0011_STRUCT;
+
+// **** D0F0xE4_PIF_0012 Register Definition ****
+// Address
+#define D0F0xE4_PIF_0012_ADDRESS 0x12
+
+// Type
+#define D0F0xE4_PIF_0012_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_PIF_0012_TxPowerStateInTxs2_OFFSET 0
+#define D0F0xE4_PIF_0012_TxPowerStateInTxs2_WIDTH 3
+#define D0F0xE4_PIF_0012_TxPowerStateInTxs2_MASK 0x7
+#define D0F0xE4_PIF_0012_ForceRxEnInL0s_OFFSET 3
+#define D0F0xE4_PIF_0012_ForceRxEnInL0s_WIDTH 1
+#define D0F0xE4_PIF_0012_ForceRxEnInL0s_MASK 0x8
+#define D0F0xE4_PIF_0012_RxPowerStateInRxs2_OFFSET 4
+#define D0F0xE4_PIF_0012_RxPowerStateInRxs2_WIDTH 3
+#define D0F0xE4_PIF_0012_RxPowerStateInRxs2_MASK 0x70
+#define D0F0xE4_PIF_0012_PllPowerStateInTxs2_OFFSET 7
+#define D0F0xE4_PIF_0012_PllPowerStateInTxs2_WIDTH 3
+#define D0F0xE4_PIF_0012_PllPowerStateInTxs2_MASK 0x380
+#define D0F0xE4_PIF_0012_PllPowerStateInOff_OFFSET 10
+#define D0F0xE4_PIF_0012_PllPowerStateInOff_WIDTH 3
+#define D0F0xE4_PIF_0012_PllPowerStateInOff_MASK 0x1c00
+#define D0F0xE4_PIF_0012_Reserved_15_13_OFFSET 13
+#define D0F0xE4_PIF_0012_Reserved_15_13_WIDTH 3
+#define D0F0xE4_PIF_0012_Reserved_15_13_MASK 0xe000
+#define D0F0xE4_PIF_0012_Tx2p5clkClockGatingEn_OFFSET 16
+#define D0F0xE4_PIF_0012_Tx2p5clkClockGatingEn_WIDTH 1
+#define D0F0xE4_PIF_0012_Tx2p5clkClockGatingEn_MASK 0x10000
+#define D0F0xE4_PIF_0012_Reserved_23_17_OFFSET 17
+#define D0F0xE4_PIF_0012_Reserved_23_17_WIDTH 7
+#define D0F0xE4_PIF_0012_Reserved_23_17_MASK 0xfe0000
+#define D0F0xE4_PIF_0012_PllRampUpTime_OFFSET 24
+#define D0F0xE4_PIF_0012_PllRampUpTime_WIDTH 3
+#define D0F0xE4_PIF_0012_PllRampUpTime_MASK 0x7000000
+#define D0F0xE4_PIF_0012_Reserved_27_27_OFFSET 27
+#define D0F0xE4_PIF_0012_Reserved_27_27_WIDTH 1
+#define D0F0xE4_PIF_0012_Reserved_27_27_MASK 0x8000000
+#define D0F0xE4_PIF_0012_PllPwrOverrideEn_OFFSET 28
+#define D0F0xE4_PIF_0012_PllPwrOverrideEn_WIDTH 1
+#define D0F0xE4_PIF_0012_PllPwrOverrideEn_MASK 0x10000000
+#define D0F0xE4_PIF_0012_PllPwrOverrideVal_OFFSET 29
+#define D0F0xE4_PIF_0012_PllPwrOverrideVal_WIDTH 3
+#define D0F0xE4_PIF_0012_PllPwrOverrideVal_MASK 0xe0000000
+
+/// D0F0xE4_PIF_0012
+typedef union {
+ struct { ///<
+ UINT32 TxPowerStateInTxs2:3 ; ///<
+ UINT32 ForceRxEnInL0s:1 ; ///<
+ UINT32 RxPowerStateInRxs2:3 ; ///<
+ UINT32 PllPowerStateInTxs2:3 ; ///<
+ UINT32 PllPowerStateInOff:3 ; ///<
+ UINT32 Reserved_15_13:3 ; ///<
+ UINT32 Tx2p5clkClockGatingEn:1 ; ///<
+ UINT32 Reserved_23_17:7 ; ///<
+ UINT32 PllRampUpTime:3 ; ///<
+ UINT32 Reserved_27_27:1 ; ///<
+ UINT32 PllPwrOverrideEn:1 ; ///<
+ UINT32 PllPwrOverrideVal:3 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_PIF_0012_STRUCT;
+
+
+// **** D0F0xE4_PIF_0017 Register Definition ****
+// Address
+#define D0F0xE4_PIF_0017_ADDRESS 0x17
+
+// Type
+#define D0F0xE4_PIF_0017_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_PIF_0017_TxPowerStateInTxs2_OFFSET 0
+#define D0F0xE4_PIF_0017_TxPowerStateInTxs2_WIDTH 3
+#define D0F0xE4_PIF_0017_TxPowerStateInTxs2_MASK 0x7
+#define D0F0xE4_PIF_0017_ForceRxEnInL0s_OFFSET 3
+#define D0F0xE4_PIF_0017_ForceRxEnInL0s_WIDTH 1
+#define D0F0xE4_PIF_0017_ForceRxEnInL0s_MASK 0x8
+#define D0F0xE4_PIF_0017_RxPowerStateInRxs2_OFFSET 4
+#define D0F0xE4_PIF_0017_RxPowerStateInRxs2_WIDTH 3
+#define D0F0xE4_PIF_0017_RxPowerStateInRxs2_MASK 0x70
+#define D0F0xE4_PIF_0017_PllPowerStateInTxs2_OFFSET 7
+#define D0F0xE4_PIF_0017_PllPowerStateInTxs2_WIDTH 3
+#define D0F0xE4_PIF_0017_PllPowerStateInTxs2_MASK 0x380
+#define D0F0xE4_PIF_0017_PllPowerStateInOff_OFFSET 10
+#define D0F0xE4_PIF_0017_PllPowerStateInOff_WIDTH 3
+#define D0F0xE4_PIF_0017_PllPowerStateInOff_MASK 0x1c00
+#define D0F0xE4_PIF_0017_Reserved_15_13_OFFSET 13
+#define D0F0xE4_PIF_0017_Reserved_15_13_WIDTH 3
+#define D0F0xE4_PIF_0017_Reserved_15_13_MASK 0xe000
+#define D0F0xE4_PIF_0017_Tx2p5clkClockGatingEn_OFFSET 16
+#define D0F0xE4_PIF_0017_Tx2p5clkClockGatingEn_WIDTH 1
+#define D0F0xE4_PIF_0017_Tx2p5clkClockGatingEn_MASK 0x10000
+#define D0F0xE4_PIF_0017_Reserved_23_17_OFFSET 17
+#define D0F0xE4_PIF_0017_Reserved_23_17_WIDTH 7
+#define D0F0xE4_PIF_0017_Reserved_23_17_MASK 0xfe0000
+#define D0F0xE4_PIF_0017_PllRampUpTime_OFFSET 24
+#define D0F0xE4_PIF_0017_PllRampUpTime_WIDTH 3
+#define D0F0xE4_PIF_0017_PllRampUpTime_MASK 0x7000000
+#define D0F0xE4_PIF_0017_Reserved_27_27_OFFSET 27
+#define D0F0xE4_PIF_0017_Reserved_27_27_WIDTH 1
+#define D0F0xE4_PIF_0017_Reserved_27_27_MASK 0x8000000
+#define D0F0xE4_PIF_0017_PllPwrOverrideEn_OFFSET 28
+#define D0F0xE4_PIF_0017_PllPwrOverrideEn_WIDTH 1
+#define D0F0xE4_PIF_0017_PllPwrOverrideEn_MASK 0x10000000
+#define D0F0xE4_PIF_0017_PllPwrOverrideVal_OFFSET 29
+#define D0F0xE4_PIF_0017_PllPwrOverrideVal_WIDTH 3
+#define D0F0xE4_PIF_0017_PllPwrOverrideVal_MASK 0xe0000000
+
+/// D0F0xE4_PIF_0017
+typedef union {
+ struct { ///<
+ UINT32 TxPowerStateInTxs2:3 ; ///<
+ UINT32 ForceRxEnInL0s:1 ; ///<
+ UINT32 RxPowerStateInRxs2:3 ; ///<
+ UINT32 PllPowerStateInTxs2:3 ; ///<
+ UINT32 PllPowerStateInOff:3 ; ///<
+ UINT32 Reserved_15_13:3 ; ///<
+ UINT32 Tx2p5clkClockGatingEn:1 ; ///<
+ UINT32 Reserved_23_17:7 ; ///<
+ UINT32 PllRampUpTime:3 ; ///<
+ UINT32 Reserved_27_27:1 ; ///<
+ UINT32 PllPwrOverrideEn:1 ; ///<
+ UINT32 PllPwrOverrideVal:3 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_PIF_0017_STRUCT;
+
+
+// **** D0F0xE4_CORE_00B0 Register Definition ****
+// Address
+#define D0F0xE4_CORE_00B0_ADDRESS 0xb0
+
+// Type
+#define D0F0xE4_CORE_00B0_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_CORE_00B0_Reserved_1_0_OFFSET 0
+#define D0F0xE4_CORE_00B0_Reserved_1_0_WIDTH 2
+#define D0F0xE4_CORE_00B0_Reserved_1_0_MASK 0x3
+#define D0F0xE4_CORE_00B0_StrapF0MsiEn_OFFSET 2
+#define D0F0xE4_CORE_00B0_StrapF0MsiEn_WIDTH 1
+#define D0F0xE4_CORE_00B0_StrapF0MsiEn_MASK 0x4
+#define D0F0xE4_CORE_00B0_Reserved_4_3_OFFSET 3
+#define D0F0xE4_CORE_00B0_Reserved_4_3_WIDTH 2
+#define D0F0xE4_CORE_00B0_Reserved_4_3_MASK 0x18
+#define D0F0xE4_CORE_00B0_StrapF0AerEn_OFFSET 5
+#define D0F0xE4_CORE_00B0_StrapF0AerEn_WIDTH 1
+#define D0F0xE4_CORE_00B0_StrapF0AerEn_MASK 0x20
+#define D0F0xE4_CORE_00B0_Bitfield_6_6_MASK 0x40
+#define D0F0xE4_CORE_00B0_Reserved_31_7_OFFSET 7
+#define D0F0xE4_CORE_00B0_Reserved_31_7_WIDTH 25
+#define D0F0xE4_CORE_00B0_Reserved_31_7_MASK 0xffffff80
+
+/// D0F0xE4_CORE_00B0
+typedef union {
+ struct { ///<
+ UINT32 Reserved_1_0:2 ; ///<
+ UINT32 StrapF0MsiEn:1 ; ///<
+ UINT32 Reserved_4_3:2 ; ///<
+ UINT32 StrapF0AerEn:1 ; ///<
+ UINT32 Bitfield_6_6:1 ; ///<
+ UINT32 Reserved_31_7:25; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_CORE_00B0_STRUCT;
+typedef union {
+ struct { ///<
+ UINT32 Bitfield_0_0:1; ///<
+ UINT32 Bitfield_1_1:1 ; ///<
+ UINT32 Reserved_15_2:14; ///<
+ UINT32 Bitfield_16_16:1; ///<
+ UINT32 Bitfield_17_17:1 ; ///<
+ UINT32 Reserved_31_18:14; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} GRC2_STRUCT;
+
+
+
+#endif
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbRegistersKB.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbRegistersKB.h
new file mode 100644
index 0000000..a469eb3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbRegistersKB.h
@@ -0,0 +1,3954 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AGESA gnb file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 88282 $ @e \$Date: 2013-02-19 11:20:56 -0600 (Tue, 19 Feb 2013) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+#ifndef _GNBREGISTERSKB_H_
+#define _GNBREGISTERSKB_H_
+#define TYPE_D0F0 0x1
+#define TYPE_D0F0x64 0x2
+#define TYPE_D0F0x98 0x3
+#define TYPE_D0F0xBC 0x4
+#define TYPE_D18F1 0xb
+#define TYPE_D18F2 0xc
+#define TYPE_D18F3 0xd
+#define TYPE_D18F4 0xe
+#define TYPE_D18F5 0xf
+#define TYPE_MSR 0x10
+#define TYPE_D1F0 0x11
+#define TYPE_D18F2x9C_dct0 0x13
+#define TYPE_D18F2x9C_dct0_mp0 0x14
+#define TYPE_D18F2x9C_dct0_mp1 0x15
+#define TYPE_D18F2x9C_dct1 0x16
+#define TYPE_D18F2x9C_dct1_mp0 0x17
+#define TYPE_D18F2x9C_dct1_mp1 0x18
+#define TYPE_D18F2_dct0 0x19
+#define TYPE_D18F2_dct1 0x1a
+#define TYPE_D18F2_dct0_mp0 0x1b
+#define TYPE_D18F2_dct0_mp1 0x1c
+#define TYPE_D1F1 0x1d
+#define TYPE_D18F2_dct1_mp0 0x1e
+#define TYPE_D18F2_dct1_mp1 0x1f
+#define TYPE_CGIND 0x20
+#define TYPE_SMU_MSG 0x21
+#define TYPE_D0F0xD4 0x22
+#define TYPE_D18F0 0x24
+
+#ifndef WRAP_SPACE
+ #define WRAP_SPACE(w, x) (0x01300000 | (w << 16) | (x))
+#endif
+#ifndef CORE_SPACE
+ #define CORE_SPACE(c, x) (0x00010000 | (c << 24) | (x))
+#endif
+#ifndef PHY_SPACE
+ #define PHY_SPACE(w, p, x) (0x00200000 | ((p + 1) << 24) | (w << 16) | (x))
+#endif
+#ifndef PIF_SPACE
+ #define PIF_SPACE(w, p, x) (0x00100000 | ((p + 1) << 24) | (w << 16) | (x))
+#endif
+
+#define INVALID_SMU_MSG 0xFF
+#define SMU_MSG_TYPE TYPE_SMU_MSG
+#define SMC_MSG_TEST INVALID_SMU_MSG // 1
+#define SMC_MSG_PHY_LN_OFF INVALID_SMU_MSG // 2
+#define SMC_MSG_PHY_LN_ON INVALID_SMU_MSG // 3
+#define SMC_MSG_DDI_PHY_OFF INVALID_SMU_MSG // 4
+#define SMC_MSG_DDI_PHY_ON INVALID_SMU_MSG // 5
+#define SMC_MSG_CASCADE_PLL_OFF INVALID_SMU_MSG // 6
+#define SMC_MSG_CASCADE_PLL_ON INVALID_SMU_MSG // 7
+#define SMC_MSG_PWR_OFF_x16 INVALID_SMU_MSG // 8
+#define SMC_MSG_FLUSH_DATA_CACHE INVALID_SMU_MSG // 10
+#define SMC_MSG_FLUSH_INSTRUCTION_CACHE INVALID_SMU_MSG // 11
+#define SMC_MSG_CONFIG_VPC_ACCUMULATOR 12
+#define SMC_MSG_RECONFIGURE_SB 25
+#define SMC_MSG_UPDATE_BAPM INVALID_SMU_MSG // 26
+#define SMC_MSG_PCIE_PLLSWITCH INVALID_SMU_MSG // 27
+#define SMC_MSG_FORCE_LCLK_DPM_STATE INVALID_SMU_MSG // 28
+#define SMC_MSG_UNFORCE_LCLK_DPM_STATE INVALID_SMU_MSG // 29
+#define SMC_MSG_LCLK_DPM_ENABLE 30
+#define SMC_MSG_LCLK_DPM_DISABLE 31
+#define SMC_MSG_DDI_PHY_IDLE INVALID_SMU_MSG // 34
+#define SMC_MSG_DDI_PHY_BUSY INVALID_SMU_MSG // 35
+#define SMC_MSG_DSMU INVALID_SMU_MSG // 36
+#define SMC_MSG_NBDPM_DISABLE INVALID_SMU_MSG // 37
+#define SMC_MSG_NBDPM_FORCENOMINAL INVALID_SMU_MSG // 38
+#define SMC_MSG_NBDPM_FORCEPERFORMANCE INVALID_SMU_MSG // 39
+#define SMC_MSG_NBDPM_UNFORCE INVALID_SMU_MSG // 40
+#define SMC_MSG_RESET INVALID_SMU_MSG // 41
+#define SMC_MSG_AVS_ENABLE INVALID_SMU_MSG // 42
+#define SMC_MSG_AVS_DISABLE INVALID_SMU_MSG // 43
+#define SMC_MSG_LPMX_ENABLE INVALID_SMU_MSG // 44
+#define SMC_MSG_LPMX_DISABLE INVALID_SMU_MSG // 45
+#define SMC_MSG_TDC_LIMIT_DISABLE 47
+#define SMC_MSG_BAPM_DISABLE 49
+#define SMC_MSG_TDP_LIMIT_ENABLE INVALID_SMU_MSG // 50
+#define SMC_MSG_TDP_LIMIT_DISABLE INVALID_SMU_MSG // 51
+#define SMC_MSG_SPMI_ENABLE INVALID_SMU_MSG // 52
+#define SMC_MSG_SPMI_DISABLE INVALID_SMU_MSG // 53
+#define SMC_MSG_SPMI_TEST INVALID_SMU_MSG // 54
+#define SMC_MSG_EXT_API INVALID_SMU_MSG // 55
+#define SMC_MSG_THERMAL_CNTL_DISABLE 57
+#define SMC_MSG_VDDNB_REQUEST 58
+#define SMC_MSG_VOLTAGE_CNTL_ENABLE 59
+#define SMC_MSG_VOLTAGE_CNTL_DISABLE 60
+#define SMC_MSG_NBDPM_ENABLE INVALID_SMU_MSG
+#define SMC_MSG_MCARB_UPDATE_ENABLE INVALID_SMU_MSG
+#define SMC_MSG_MCARB_UPDATE_DISABLE INVALID_SMU_MSG
+#define SMC_MSG_LHTC_LIMIT_DISABLE 71
+#define SMC_MSG_PWR_OFF_IOMMU INVALID_SMU_MSG
+#define SMC_MSG_PWR_ON_IOMMU INVALID_SMU_MSG
+#define SMC_MSG_MONITOR_PORT80_ENABLE INVALID_SMU_MSG
+#define SMC_MSG_MONITOR_PORT80_DISABLE INVALID_SMU_MSG
+#define SMC_MSG_LCLKDPM_SETENABLEMASK INVALID_SMU_MSG
+#define SMC_MSG_READ_SCS 80
+#define SMC_MSG_ENABLE_PKGPWRLIMIT 81
+#define SMC_MSG_DISABLE_PKGPWRLIMIT 82
+#define SMC_MSG_ENABLE_ALLCLK_MONITOR 83
+#define SMC_MSG_DISABLE_ALLCLK_MONITOR INVALID_SMU_MSG
+#define SMC_MSG_LHTC_LIMIT_SetLimit 90 // 0x5A
+
+#define L1_SEL_PPD 0
+#define L1_SEL_BIF 1
+#define L1_SEL_INTGEN 2
+
+// **** D18F0x110 Register Definition ****
+// Address
+#define D18F0x110_ADDRESS 0x110
+
+// Type
+#define D18F0x110_TYPE TYPE_D18F0
+
+// **** D18F1x44 Register Definition ****
+// Address
+#define D18F1x44_ADDRESS 0x44
+// Type
+#define D18F1x44_TYPE TYPE_D18F1
+
+// Field Data
+#define D18F1x44_DstNode_OFFSET 0
+#define D18F1x44_DstNode_WIDTH 3
+#define D18F1x44_DstNode_MASK 0x7
+#define D18F1x44_Reserved_7_3_OFFSET 3
+#define D18F1x44_Reserved_7_3_WIDTH 5
+#define D18F1x44_Reserved_7_3_MASK 0xF8
+#define D18F1x44_Reserved_10_8_OFFSET 8
+#define D18F1x44_Reserved_10_8_WIDTH 3
+#define D18F1x44_Reserved_10_8_MASK 0x700
+#define D18F1x44_Reserved_15_11_OFFSET 11
+#define D18F1x44_Reserved_15_11_WIDTH 5
+#define D18F1x44_Reserved_15_11_MASK 0xF800
+#define D18F1x44_DramLimit_39_24_OFFSET 16
+#define D18F1x44_DramLimit_39_24_WIDTH 16
+#define D18F1x44_DramLimit_39_24_MASK 0xFFFF0000
+
+/// D18F1x44
+typedef union {
+ struct { ///<
+ UINT32 DstNode:3; ///<
+ UINT32 Reserved_7_3:5; ///<
+ UINT32 Reserved_10_8:3; ///<
+ UINT32 Reserved_15_11:5; ///<
+ UINT32 DramLimit_39_24:16; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D18F1x44_STRUCT;
+
+
+
+// **** D18F2x90_dct0 Register Definition ****
+// Address
+#define D18F2x90_dct0_ADDRESS 0x90
+// Type
+#define D18F2x90_dct0_TYPE TYPE_D18F2
+
+// Field Data
+#define D18F2x90_dct0_ExitSelfRef_OFFSET 1
+#define D18F2x90_dct0_ExitSelfRef_WIDTH 1
+#define D18F2x90_dct0_ExitSelfRef_MASK 0x2
+#define D18F2x90_dct0_Reserved_7_2_OFFSET 2
+#define D18F2x90_dct0_Reserved_7_2_WIDTH 6
+#define D18F2x90_dct0_Reserved_7_2_MASK 0xfc
+#define D18F2x90_dct0_Reserved_8_8_OFFSET 8
+#define D18F2x90_dct0_Reserved_8_8_WIDTH 1
+#define D18F2x90_dct0_Reserved_8_8_MASK 0x100
+#define D18F2x90_dct0_Reserved_10_9_OFFSET 9
+#define D18F2x90_dct0_Reserved_10_9_WIDTH 2
+#define D18F2x90_dct0_Reserved_10_9_MASK 0x600
+#define D18F2x90_dct0_Reserved_11_11_OFFSET 11
+#define D18F2x90_dct0_Reserved_11_11_WIDTH 1
+#define D18F2x90_dct0_Reserved_11_11_MASK 0x800
+#define D18F2x90_dct0_Reserved_15_12_OFFSET 12
+#define D18F2x90_dct0_Reserved_15_12_WIDTH 4
+#define D18F2x90_dct0_Reserved_15_12_MASK 0xf000
+#define D18F2x90_dct0_UnbuffDimm_OFFSET 16
+#define D18F2x90_dct0_UnbuffDimm_WIDTH 1
+#define D18F2x90_dct0_UnbuffDimm_MASK 0x10000
+#define D18F2x90_dct0_UnbuffDimm_VALUE 0x1
+#define D18F2x90_dct0_EnterSelfRef_OFFSET 17
+#define D18F2x90_dct0_EnterSelfRef_WIDTH 1
+#define D18F2x90_dct0_EnterSelfRef_MASK 0x20000
+#define D18F2x90_dct0_PendRefPayback_OFFSET 18
+#define D18F2x90_dct0_PendRefPayback_WIDTH 1
+#define D18F2x90_dct0_PendRefPayback_MASK 0x40000
+#define D18F2x90_dct0_PendRefPayback_VALUE 0x0
+#define D18F2x90_dct0_DimmEccEn_OFFSET 19
+#define D18F2x90_dct0_DimmEccEn_WIDTH 1
+#define D18F2x90_dct0_DimmEccEn_MASK 0x80000
+#define D18F2x90_dct0_DynPageCloseEn_OFFSET 20
+#define D18F2x90_dct0_DynPageCloseEn_WIDTH 1
+#define D18F2x90_dct0_DynPageCloseEn_MASK 0x100000
+#define D18F2x90_dct0_IdleCycLowLimit_OFFSET 21
+#define D18F2x90_dct0_IdleCycLowLimit_WIDTH 2
+#define D18F2x90_dct0_IdleCycLowLimit_MASK 0x600000
+#define D18F2x90_dct0_ForceAutoPchg_OFFSET 23
+#define D18F2x90_dct0_ForceAutoPchg_WIDTH 1
+#define D18F2x90_dct0_ForceAutoPchg_MASK 0x800000
+#define D18F2x90_dct0_StagRefEn_OFFSET 24
+#define D18F2x90_dct0_StagRefEn_WIDTH 1
+#define D18F2x90_dct0_StagRefEn_MASK 0x1000000
+#define D18F2x90_dct0_StagRefEn_VALUE 0x1
+#define D18F2x90_dct0_PendRefPaybackS3En_OFFSET 25
+#define D18F2x90_dct0_PendRefPaybackS3En_WIDTH 1
+#define D18F2x90_dct0_PendRefPaybackS3En_MASK 0x2000000
+#define D18F2x90_dct0_PendRefPaybackS3En_VALUE 0x1
+#define D18F2x90_dct0_Reserved_26_26_OFFSET 26
+#define D18F2x90_dct0_Reserved_26_26_WIDTH 1
+#define D18F2x90_dct0_Reserved_26_26_MASK 0x4000000
+#define D18F2x90_dct0_DisDllShutdownSR_OFFSET 27
+#define D18F2x90_dct0_DisDllShutdownSR_WIDTH 1
+#define D18F2x90_dct0_DisDllShutdownSR_MASK 0x8000000
+#define D18F2x90_dct0_IdleCycLimit_OFFSET 28
+#define D18F2x90_dct0_IdleCycLimit_WIDTH 4
+#define D18F2x90_dct0_IdleCycLimit_MASK 0xf0000000
+#define D18F2x90_dct0_IdleCycLimit_VALUE 0x8
+
+/// D18F2x90_dct0
+typedef union {
+ struct { ///<
+ UINT32 ExitSelfRef:1 ; ///<
+ UINT32 Reserved_7_2:6 ; ///<
+ UINT32 Reserved_8_8:1 ; ///<
+ UINT32 Reserved_10_9:2 ; ///<
+ UINT32 Reserved_11_11:1 ; ///<
+ UINT32 Reserved_15_12:4 ; ///<
+ UINT32 UnbuffDimm:1 ; ///<
+ UINT32 EnterSelfRef:1 ; ///<
+ UINT32 PendRefPayback:1 ; ///<
+ UINT32 DimmEccEn:1 ; ///<
+ UINT32 DynPageCloseEn:1 ; ///<
+ UINT32 IdleCycLowLimit:2 ; ///<
+ UINT32 ForceAutoPchg:1 ; ///<
+ UINT32 StagRefEn:1 ; ///<
+ UINT32 PendRefPaybackS3En:1 ; ///<
+ UINT32 Reserved_26_26:1 ; ///<
+ UINT32 DisDllShutdownSR:1 ; ///<
+ UINT32 IdleCycLimit:4 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D18F2x90_dct0_STRUCT;
+
+
+// **** D18F2x94_dct0 Register Definition ****
+// Address
+#define D18F2x94_dct0_ADDRESS 0x94
+// Type
+#define D18F2x94_dct0_TYPE TYPE_D18F2_dct0
+
+// Field Data
+#define D18F2x94_dct0_MemClkFreq_OFFSET 0
+#define D18F2x94_dct0_MemClkFreq_WIDTH 5
+#define D18F2x94_dct0_MemClkFreq_MASK 0x1f
+#define D18F2x94_dct0_Reserved_6_5_OFFSET 5
+#define D18F2x94_dct0_Reserved_6_5_WIDTH 2
+#define D18F2x94_dct0_Reserved_6_5_MASK 0x60
+#define D18F2x94_dct0_MemClkFreqVal_OFFSET 7
+#define D18F2x94_dct0_MemClkFreqVal_WIDTH 1
+#define D18F2x94_dct0_MemClkFreqVal_MASK 0x80
+#define D18F2x94_dct0_Reserved_9_8_OFFSET 8
+#define D18F2x94_dct0_Reserved_9_8_WIDTH 2
+#define D18F2x94_dct0_Reserved_9_8_MASK 0x300
+#define D18F2x94_dct0_ZqcsInterval_OFFSET 10
+#define D18F2x94_dct0_ZqcsInterval_WIDTH 2
+#define D18F2x94_dct0_ZqcsInterval_MASK 0xc00
+#define D18F2x94_dct0_RDqsEn_OFFSET 12
+#define D18F2x94_dct0_RDqsEn_WIDTH 1
+#define D18F2x94_dct0_RDqsEn_MASK 0x1000
+#define D18F2x94_dct0_Reserved_13_13_OFFSET 13
+#define D18F2x94_dct0_Reserved_13_13_WIDTH 1
+#define D18F2x94_dct0_Reserved_13_13_MASK 0x2000
+#define D18F2x94_dct0_DisDramInterface_OFFSET 14
+#define D18F2x94_dct0_DisDramInterface_WIDTH 1
+#define D18F2x94_dct0_DisDramInterface_MASK 0x4000
+#define D18F2x94_dct0_PowerDownEn_OFFSET 15
+#define D18F2x94_dct0_PowerDownEn_WIDTH 1
+#define D18F2x94_dct0_PowerDownEn_MASK 0x8000
+#define D18F2x94_dct0_PowerDownMode_OFFSET 16
+#define D18F2x94_dct0_PowerDownMode_WIDTH 1
+#define D18F2x94_dct0_PowerDownMode_MASK 0x10000
+#define D18F2x94_dct0_PowerDownMode_VALUE 0x1
+#define D18F2x94_dct0_Reserved_17_17_OFFSET 17
+#define D18F2x94_dct0_Reserved_17_17_WIDTH 1
+#define D18F2x94_dct0_Reserved_17_17_MASK 0x20000
+#define D18F2x94_dct0_Reserved_18_18_OFFSET 18
+#define D18F2x94_dct0_Reserved_18_18_WIDTH 1
+#define D18F2x94_dct0_Reserved_18_18_MASK 0x40000
+#define D18F2x94_dct0_Reserved_19_19_OFFSET 19
+#define D18F2x94_dct0_Reserved_19_19_WIDTH 1
+#define D18F2x94_dct0_Reserved_19_19_MASK 0x80000
+#define D18F2x94_dct0_SlowAccessMode_OFFSET 20
+#define D18F2x94_dct0_SlowAccessMode_WIDTH 1
+#define D18F2x94_dct0_SlowAccessMode_MASK 0x100000
+#define D18F2x94_dct0_FreqChgInProg_OFFSET 21
+#define D18F2x94_dct0_FreqChgInProg_WIDTH 1
+#define D18F2x94_dct0_FreqChgInProg_MASK 0x200000
+#define D18F2x94_dct0_BankSwizzleMode_OFFSET 22
+#define D18F2x94_dct0_BankSwizzleMode_WIDTH 1
+#define D18F2x94_dct0_BankSwizzleMode_MASK 0x400000
+#define D18F2x94_dct0_ProcOdtDis_OFFSET 23
+#define D18F2x94_dct0_ProcOdtDis_WIDTH 1
+#define D18F2x94_dct0_ProcOdtDis_MASK 0x800000
+#define D18F2x94_dct0_DcqBypassMax_OFFSET 24
+#define D18F2x94_dct0_DcqBypassMax_WIDTH 5
+#define D18F2x94_dct0_DcqBypassMax_MASK 0x1f000000
+#define D18F2x94_dct0_Reserved_30_29_OFFSET 29
+#define D18F2x94_dct0_Reserved_30_29_WIDTH 2
+#define D18F2x94_dct0_Reserved_30_29_MASK 0x60000000
+#define D18F2x94_dct0_DphyMemPsSelEn_OFFSET 31
+#define D18F2x94_dct0_DphyMemPsSelEn_WIDTH 1
+#define D18F2x94_dct0_DphyMemPsSelEn_MASK 0x80000000
+#define D18F2x94_dct0_DphyMemPsSelEn_VALUE 0x1
+
+/// D18F2x94_dct0
+typedef union {
+ struct { ///<
+ UINT32 MemClkFreq:5 ; ///<
+ UINT32 Reserved_6_5:2 ; ///<
+ UINT32 MemClkFreqVal:1 ; ///<
+ UINT32 Reserved_9_8:2 ; ///<
+ UINT32 ZqcsInterval:2 ; ///<
+ UINT32 RDqsEn:1 ; ///<
+ UINT32 Reserved_13_13:1 ; ///<
+ UINT32 DisDramInterface:1 ; ///<
+ UINT32 PowerDownEn:1 ; ///<
+ UINT32 PowerDownMode:1 ; ///<
+ UINT32 Reserved_17_17:1 ; ///<
+ UINT32 Reserved_18_18:1 ; ///<
+ UINT32 Reserved_19_19:1 ; ///<
+ UINT32 SlowAccessMode:1 ; ///<
+ UINT32 FreqChgInProg:1 ; ///<
+ UINT32 BankSwizzleMode:1 ; ///<
+ UINT32 ProcOdtDis:1 ; ///<
+ UINT32 DcqBypassMax:5 ; ///<
+ UINT32 Reserved_30_29:2 ; ///<
+ UINT32 DphyMemPsSelEn:1 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D18F2x94_dct0_STRUCT;
+
+#define D18F2xA8_dct0_MemPhyPllPdMode_OFFSET 16
+#define D18F2xA8_dct0_MemPhyPllPdMode_WIDTH 2
+
+// **** D18F2x2E0_dct0 Register Definition ****
+// Address
+#define D18F2x2E0_dct0_ADDRESS 0x2e0
+
+// Type
+#define D18F2x2E0_dct0_TYPE TYPE_D18F2
+// Field Data
+
+#define D18F2x2E0_dct0_M1MemClkFreq_OFFSET 24
+#define D18F2x2E0_dct0_M1MemClkFreq_WIDTH 5
+
+/// D18F2x2E0_dct0
+typedef union {
+ struct { ///<
+ UINT32 Reserved_1:1 ; ///<
+ UINT32 Reserved_19_1:19; ///<
+ UINT32 Reserved_22_20:3 ; ///<
+ UINT32 Reserved_23_23:1 ; ///<
+ UINT32 M1MemClkFreq:5 ; ///<
+ UINT32 Reserved_29_29:1 ; ///<
+ UINT32 Reserved_30_30:1 ; ///<
+ UINT32 Reserved_31_31:1 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D18F2x2E0_dct0_STRUCT;
+
+// **** D18F4x110 Register Definition ****
+// Address
+#define D18F4x110_ADDRESS 0x110
+
+// Type
+#define D18F4x110_TYPE TYPE_D18F4
+// Field Data
+#define D18F4x110_CSampleTimer_OFFSET 0
+#define D18F4x110_CSampleTimer_WIDTH 12
+#define D18F4x110_CSampleTimer_MASK 0xfff
+#define D18F4x110_CSampleTimer_VALUE 0x2
+#define D18F4x110_FastCSampleTimer_OFFSET 12
+#define D18F4x110_FastCSampleTimer_WIDTH 1
+#define D18F4x110_FastCSampleTimer_MASK 0x1000
+#define D18F4x110_MinResTmr_OFFSET 13
+#define D18F4x110_MinResTmr_WIDTH 8
+#define D18F4x110_MinResTmr_MASK 0x1fe000
+#define D18F4x110_Reserved_31_21_OFFSET 21
+#define D18F4x110_Reserved_31_21_WIDTH 11
+#define D18F4x110_Reserved_31_21_MASK 0xffe00000
+
+/// D18F4x110
+typedef union {
+ struct { ///<
+ UINT32 CSampleTimer:12; ///<
+ UINT32 FastCSampleTimer:1 ; ///<
+ UINT32 MinResTmr:8 ; ///<
+ UINT32 Reserved_31_21:11; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D18F4x110_STRUCT;
+
+// **** D18F5xE0 Register Definition ****
+// Address
+#define D18F5xE0_ADDRESS 0xe0
+
+// Type
+#define D18F5xE0_TYPE TYPE_D18F5
+// Field Data
+#define D18F5xE0_RunAvgRange_OFFSET 0
+#define D18F5xE0_RunAvgRange_WIDTH 4
+#define D18F5xE0_RunAvgRange_MASK 0xf
+#define D18F5xE0_RunAvgRange_VALUE 0x2
+#define D18F5xE0_Reserved_31_4_OFFSET 4
+#define D18F5xE0_Reserved_31_4_WIDTH 28
+#define D18F5xE0_Reserved_31_4_MASK 0xfffffff0
+
+/// D18F5xE0
+typedef union {
+ struct { ///<
+ UINT32 RunAvgRange:4 ; ///<
+ UINT32 Reserved_31_4:28 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D18F5xE0_STRUCT;
+
+// **** D18F5x160 Register Definition ****
+// Address
+#define D18F5x160_ADDRESS 0x160
+
+// Type
+#define D18F5x160_TYPE TYPE_D18F5
+#define D18F5x160_NbPstateEn_OFFSET 0
+#define D18F5x160_NbPstateEn_WIDTH 1
+
+#define D18F5x160_MemPstate_OFFSET 18
+#define D18F5x160_MemPstate_WIDTH 1
+#define D18F5x160_NbFid_OFFSET 1
+#define D18F5x160_NbFid_WIDTH 6
+#define D18F5x160_NbDid_OFFSET 7
+#define D18F5x160_NbDid_WIDTH 1
+#define D18F5x160_NbVid_6_0_OFFSET 10
+#define D18F5x160_NbVid_6_0_WIDTH 7
+#define D18F5x160_NbVid_7_OFFSET 21
+#define D18F5x160_NbVid_7_WIDTH 1
+
+#define D18F5x160_NbVid_7__OFFSET 21
+#define D18F5x160_NbVid_7__WIDTH 1
+
+/// D18F5x160
+typedef union {
+ struct { ///<
+ UINT32 NbPstateEn:1 ; ///<
+ UINT32 NbFid:6 ; ///<
+ UINT32 NbDid:1 ; ///<
+ UINT32 Reserved_9_8:2 ; ///<
+ UINT32 NbVid_6_0_:7 ; ///<
+ UINT32 Reserved_17_17:1 ; ///<
+ UINT32 MemPstate:1 ; ///<
+ UINT32 Reserved_20_19:2 ; ///<
+ UINT32 NbVid_7_:1 ; ///<
+ UINT32 Reserved_23_22:2 ; ///<
+ UINT32 Reserved_31_24:8 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D18F5x160_STRUCT;
+
+// **** D18F5x164 Register Definition ****
+// Address
+#define D18F5x164_ADDRESS 0x164
+
+// Type
+#define D18F5x164_TYPE TYPE_D18F5
+#define D18F5x164_NbPstateEn_OFFSET 0
+#define D18F5x164_NbPstateEn_WIDTH 1
+#define D18F5x164_MemPstate_OFFSET 18
+#define D18F5x164_MemPstate_WIDTH 1
+#define D18F5x164_NbFid_OFFSET 1
+#define D18F5x164_NbFid_WIDTH 6
+#define D18F5x164_NbDid_OFFSET 7
+#define D18F5x164_NbDid_WIDTH 1
+#define D18F5x164_NbVid_6_0_OFFSET 10
+#define D18F5x164_NbVid_6_0_WIDTH 7
+#define D18F5x164_NbVid_7_OFFSET 21
+#define D18F5x164_NbVid_7_WIDTH 1
+
+// **** D18F5x168 Register Definition ****
+// Address
+#define D18F5x168_ADDRESS 0x168
+
+// Type
+#define D18F5x168_TYPE TYPE_D18F5
+#define D18F5x168_NbPstateEn_OFFSET 0
+#define D18F5x168_NbPstateEn_WIDTH 1
+#define D18F5x168_NbFid_OFFSET 1
+#define D18F5x168_NbFid_WIDTH 6
+#define D18F5x168_NbDid_OFFSET 7
+#define D18F5x168_NbDid_WIDTH 1
+#define D18F5x168_NbVid_6_0_OFFSET 10
+#define D18F5x168_NbVid_6_0_WIDTH 7
+#define D18F5x168_MemPstate_OFFSET 18
+#define D18F5x168_MemPstate_WIDTH 1
+#define D18F5x168_NbVid_7_OFFSET 21
+#define D18F5x168_NbVid_7_WIDTH 1
+
+// **** D18F5x16C Register Definition ****
+// Address
+#define D18F5x16C_ADDRESS 0x16c
+
+// Type
+#define D18F5x16C_TYPE TYPE_D18F5
+#define D18F5x16C_NbPstateEn_OFFSET 0
+#define D18F5x16C_NbPstateEn_WIDTH 1
+#define D18F5x16C_NbFid_OFFSET 1
+#define D18F5x16C_NbFid_WIDTH 6
+#define D18F5x16C_NbDid_OFFSET 7
+#define D18F5x16C_NbDid_WIDTH 1
+#define D18F5x16C_NbVid_6_0_OFFSET 10
+#define D18F5x16C_NbVid_6_0_WIDTH 7
+#define D18F5x16C_MemPstate_OFFSET 18
+#define D18F5x16C_MemPstate_WIDTH 1
+#define D18F5x16C_NbVid_7_OFFSET 21
+#define D18F5x16C_NbVid_7_WIDTH 1
+
+// **** D18F5x170 Register Definition ****
+// Address
+#define D18F5x170_ADDRESS 0x170
+
+// Type
+#define D18F5x170_TYPE TYPE_D18F5
+// Field Data
+#define D18F5x170_NbPstateMaxVal_OFFSET 0
+#define D18F5x170_NbPstateMaxVal_WIDTH 2
+#define D18F5x170_NbPstateMaxVal_MASK 0x3
+#define D18F5x170_Reserved_2_2_OFFSET 2
+#define D18F5x170_Reserved_2_2_WIDTH 1
+#define D18F5x170_Reserved_2_2_MASK 0x4
+#define D18F5x170_NbPstateLo_OFFSET 3
+#define D18F5x170_NbPstateLo_WIDTH 2
+#define D18F5x170_NbPstateLo_MASK 0x18
+#define D18F5x170_Reserved_5_5_OFFSET 5
+#define D18F5x170_Reserved_5_5_WIDTH 1
+#define D18F5x170_Reserved_5_5_MASK 0x20
+#define D18F5x170_NbPstateHi_OFFSET 6
+#define D18F5x170_NbPstateHi_WIDTH 2
+#define D18F5x170_NbPstateHi_MASK 0xc0
+#define D18F5x170_Reserved_8_8_OFFSET 8
+#define D18F5x170_Reserved_8_8_WIDTH 1
+#define D18F5x170_Reserved_8_8_MASK 0x100
+#define D18F5x170_NbPstateThreshold_OFFSET 9
+#define D18F5x170_NbPstateThreshold_WIDTH 4
+#define D18F5x170_NbPstateThreshold_MASK 0x1e00
+#define D18F5x170_Reserved_12_12_OFFSET 12
+#define D18F5x170_Reserved_12_12_WIDTH 1
+#define D18F5x170_Reserved_12_12_MASK 0x1000
+#define D18F5x170_NbPstateDisOnP0_OFFSET 13
+#define D18F5x170_NbPstateDisOnP0_WIDTH 1
+#define D18F5x170_NbPstateDisOnP0_MASK 0x2000
+#define D18F5x170_SwNbPstateLoDis_OFFSET 14
+#define D18F5x170_SwNbPstateLoDis_WIDTH 1
+#define D18F5x170_SwNbPstateLoDis_MASK 0x4000
+#define D18F5x170_Reserved_22_15_OFFSET 15
+#define D18F5x170_Reserved_22_15_WIDTH 8
+#define D18F5x170_Reserved_22_15_MASK 0x3f8000
+#define D18F5x170_NbPstateGnbSlowDis_OFFSET 23
+#define D18F5x170_NbPstateGnbSlowDis_WIDTH 1
+#define D18F5x170_NbPstateGnbSlowDis_MASK 0x800000
+#define D18F5x170_NbPstateLoRes_OFFSET 24
+#define D18F5x170_NbPstateLoRes_WIDTH 3
+#define D18F5x170_NbPstateLoRes_MASK 0x7000000
+#define D18F5x170_NbPstateHiRes_OFFSET 27
+#define D18F5x170_NbPstateHiRes_WIDTH 3
+#define D18F5x170_NbPstateHiRes_MASK 0x38000000
+#define D18F5x170_NbPstateFidVidSbcEn_OFFSET 30
+#define D18F5x170_NbPstateFidVidSbcEn_WIDTH 1
+#define D18F5x170_NbPstateFidVidSbcEn_MASK 0x40000000
+#define D18F5x170_MemPstateDis_OFFSET 31
+#define D18F5x170_MemPstateDis_WIDTH 1
+#define D18F5x170_MemPstateDis_MASK 0x80000000
+
+/// D18F5x170
+typedef union {
+ struct { ///<
+ UINT32 NbPstateMaxVal:2 ; ///<
+ UINT32 Reserved_2_2:1 ; ///<
+ UINT32 NbPstateLo:2 ; ///<
+ UINT32 Reserved_5_5:1 ; ///<
+ UINT32 NbPstateHi:2 ; ///<
+ UINT32 Reserved_8_8:1 ; ///<
+ UINT32 NbPstateThreshold:4 ; ///<
+ UINT32 NbPstateDisOnP0:1 ; ///<
+ UINT32 SwNbPstateLoDis:1 ; ///<
+ UINT32 Reserved_22_15:8 ; ///<
+ UINT32 NbPstateGnbSlowDis:1 ; ///<
+ UINT32 NbPstateLoRes:3 ; ///<
+ UINT32 NbPstateHiRes:3 ; ///<
+ UINT32 NbPstateFidVidSbcEn:1 ; ///<
+ UINT32 MemPstateDis:1 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D18F5x170_STRUCT;
+
+// **** D18F2x118 Register Definition ****
+// Address
+#define D18F2x118_ADDRESS 0x118
+// Type
+#define D18F2x118_TYPE TYPE_D18F2
+
+// Field Data
+#define D18F2x118_MctPriCpuRd_OFFSET 0
+#define D18F2x118_MctPriCpuRd_WIDTH 2
+#define D18F2x118_MctPriCpuRd_MASK 0x3
+#define D18F2x118_MctPriCpuWr_OFFSET 2
+#define D18F2x118_MctPriCpuWr_WIDTH 2
+#define D18F2x118_MctPriCpuWr_MASK 0xC
+#define D18F2x118_MctPriIsocRd_OFFSET 4
+#define D18F2x118_MctPriIsocRd_WIDTH 2
+#define D18F2x118_MctPriIsocRd_MASK 0x30
+#define D18F2x118_MctPriIsocWr_OFFSET 6
+#define D18F2x118_MctPriIsocWr_WIDTH 2
+#define D18F2x118_MctPriIsocWr_MASK 0xC0
+#define D18F2x118_MctPriDefault_OFFSET 8
+#define D18F2x118_MctPriDefault_WIDTH 2
+#define D18F2x118_MctPriDefault_MASK 0x300
+#define D18F2x118_MctPriWr_OFFSET 10
+#define D18F2x118_MctPriWr_WIDTH 2
+#define D18F2x118_MctPriWr_MASK 0xC00
+#define D18F2x118_MctPriIsoc_OFFSET 12
+#define D18F2x118_MctPriIsoc_WIDTH 2
+#define D18F2x118_MctPriIsoc_MASK 0x3000
+#define D18F2x118_MctPriTrace_OFFSET 14
+#define D18F2x118_MctPriTrace_WIDTH 2
+#define D18F2x118_MctPriTrace_MASK 0xC000
+#define D18F2x118_MctPriScrub_OFFSET 16
+#define D18F2x118_MctPriScrub_WIDTH 2
+#define D18F2x118_MctPriScrub_MASK 0x30000
+#define D18F2x118_CC6SaveEn_OFFSET 18
+#define D18F2x118_CC6SaveEn_WIDTH 1
+#define D18F2x118_CC6SaveEn_MASK 0x40000
+#define D18F2x118_LockDramCfg_OFFSET 19
+#define D18F2x118_LockDramCfg_WIDTH 1
+#define D18F2x118_LockDramCfg_MASK 0x80000
+#define D18F2x118_McqMedPriByPassMax_OFFSET 20
+#define D18F2x118_McqMedPriByPassMax_WIDTH 3
+#define D18F2x118_McqMedPriByPassMax_MASK 0x700000
+#define D18F2x118_Reserved_23_23_OFFSET 23
+#define D18F2x118_Reserved_23_23_WIDTH 1
+#define D18F2x118_Reserved_23_23_MASK 0x800000
+#define D18F2x118_McqHiPriByPassMax_OFFSET 24
+#define D18F2x118_McqHiPriByPassMax_WIDTH 3
+#define D18F2x118_McqHiPriByPassMax_MASK 0x7000000
+#define D18F2x118_Reserved_27_27_OFFSET 27
+#define D18F2x118_Reserved_27_27_WIDTH 1
+#define D18F2x118_Reserved_27_27_MASK 0x8000000
+#define D18F2x118_MctVarPriCntLmt_OFFSET 28
+#define D18F2x118_MctVarPriCntLmt_WIDTH 4
+#define D18F2x118_MctVarPriCntLmt_MASK 0xF0000000
+
+/// D18F2x118
+typedef union {
+ struct { ///<
+ UINT32 MctPriCpuRd:2; ///<
+ UINT32 MctPriCpuWr:2; ///<
+ UINT32 MctPriIsocRd:2; ///<
+ UINT32 MctPriIsocWr:2; ///<
+ UINT32 MctPriDefault:2; ///<
+ UINT32 MctPriWr:2; ///<
+ UINT32 MctPriIsoc:2; ///<
+ UINT32 MctPriTrace:2; ///<
+ UINT32 MctPriScrub:2; ///<
+ UINT32 CC6SaveEn:1; ///<
+ UINT32 LockDramCfg:1; ///<
+ UINT32 McqMedPriByPassMax:3; ///<
+ UINT32 Reserved_23_23:1; ///<
+ UINT32 McqHiPriByPassMax:3; ///<
+ UINT32 Reserved_27_27:1; ///<
+ UINT32 MctVarPriCntLmt:4; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D18F2x118_STRUCT;
+
+
+// **** D18F3x44 Register Definition ****
+// Address
+#define D18F3x44_ADDRESS 0x44
+
+// Type
+#define D18F3x44_TYPE TYPE_D18F3
+// Field Data
+#define D18F3x44_Reserved_0_0_OFFSET 0
+#define D18F3x44_Reserved_0_0_WIDTH 1
+#define D18F3x44_Reserved_0_0_MASK 0x1
+#define D18F3x44_CpuRdDatErrEn_OFFSET 1
+#define D18F3x44_CpuRdDatErrEn_WIDTH 1
+#define D18F3x44_CpuRdDatErrEn_MASK 0x2
+#define D18F3x44_SyncFloodOnDramUcEcc_OFFSET 2
+#define D18F3x44_SyncFloodOnDramUcEcc_WIDTH 1
+#define D18F3x44_SyncFloodOnDramUcEcc_MASK 0x4
+#define D18F3x44_SyncFloodOnDramUcEcc_VALUE 0x1
+#define D18F3x44_SyncPktGenDis_OFFSET 3
+#define D18F3x44_SyncPktGenDis_WIDTH 1
+#define D18F3x44_SyncPktGenDis_MASK 0x8
+#define D18F3x44_SyncPktGenDis_VALUE 0x0
+#define D18F3x44_SyncPktPropDis_OFFSET 4
+#define D18F3x44_SyncPktPropDis_WIDTH 1
+#define D18F3x44_SyncPktPropDis_MASK 0x10
+#define D18F3x44_SyncPktPropDis_VALUE 0x0
+#define D18F3x44_IoMstAbortDis_OFFSET 5
+#define D18F3x44_IoMstAbortDis_WIDTH 1
+#define D18F3x44_IoMstAbortDis_MASK 0x20
+#define D18F3x44_CpuErrDis_OFFSET 6
+#define D18F3x44_CpuErrDis_WIDTH 1
+#define D18F3x44_CpuErrDis_MASK 0x40
+#define D18F3x44_CpuErrDis_VALUE 0x1
+#define D18F3x44_IoErrDis_OFFSET 7
+#define D18F3x44_IoErrDis_WIDTH 1
+#define D18F3x44_IoErrDis_MASK 0x80
+#define D18F3x44_WDTDis_OFFSET 8
+#define D18F3x44_WDTDis_WIDTH 1
+#define D18F3x44_WDTDis_MASK 0x100
+#define D18F3x44_WDTCntSel_2_0__OFFSET 9
+#define D18F3x44_WDTCntSel_2_0__WIDTH 3
+#define D18F3x44_WDTCntSel_2_0__MASK 0xe00
+#define D18F3x44_WDTBaseSel_OFFSET 12
+#define D18F3x44_WDTBaseSel_WIDTH 2
+#define D18F3x44_WDTBaseSel_MASK 0x3000
+#define D18F3x44_GenLinkSel_OFFSET 14
+#define D18F3x44_GenLinkSel_WIDTH 2
+#define D18F3x44_GenLinkSel_MASK 0xc000
+#define D18F3x44_GenCrcErrByte0_OFFSET 16
+#define D18F3x44_GenCrcErrByte0_WIDTH 1
+#define D18F3x44_GenCrcErrByte0_MASK 0x10000
+#define D18F3x44_GenCrcErrByte1_OFFSET 17
+#define D18F3x44_GenCrcErrByte1_WIDTH 1
+#define D18F3x44_GenCrcErrByte1_MASK 0x20000
+#define D18F3x44_GenSubLinkSel_OFFSET 18
+#define D18F3x44_GenSubLinkSel_WIDTH 2
+#define D18F3x44_GenSubLinkSel_MASK 0xc0000
+#define D18F3x44_SyncFloodOnWDT_OFFSET 20
+#define D18F3x44_SyncFloodOnWDT_WIDTH 1
+#define D18F3x44_SyncFloodOnWDT_MASK 0x100000
+#define D18F3x44_SyncFloodOnWDT_VALUE 0x1
+#define D18F3x44_SyncFloodOnAnyUcErr_OFFSET 21
+#define D18F3x44_SyncFloodOnAnyUcErr_WIDTH 1
+#define D18F3x44_SyncFloodOnAnyUcErr_MASK 0x200000
+#define D18F3x44_SyncFloodOnAnyUcErr_VALUE 0x1
+#define D18F3x44_DramEccEn_OFFSET 22
+#define D18F3x44_DramEccEn_WIDTH 1
+#define D18F3x44_DramEccEn_MASK 0x400000
+#define D18F3x44_ChipKillEccCap_OFFSET 23
+#define D18F3x44_ChipKillEccCap_WIDTH 1
+#define D18F3x44_ChipKillEccCap_MASK 0x800000
+#define D18F3x44_IoRdDatErrEn_OFFSET 24
+#define D18F3x44_IoRdDatErrEn_WIDTH 1
+#define D18F3x44_IoRdDatErrEn_MASK 0x1000000
+#define D18F3x44_DisPciCfgCpuErrRsp_OFFSET 25
+#define D18F3x44_DisPciCfgCpuErrRsp_WIDTH 1
+#define D18F3x44_DisPciCfgCpuErrRsp_MASK 0x2000000
+#define D18F3x44_FlagMcaCorrErr_OFFSET 26
+#define D18F3x44_FlagMcaCorrErr_WIDTH 1
+#define D18F3x44_FlagMcaCorrErr_MASK 0x4000000
+#define D18F3x44_NbMcaToMstCpuEn_OFFSET 27
+#define D18F3x44_NbMcaToMstCpuEn_WIDTH 1
+#define D18F3x44_NbMcaToMstCpuEn_MASK 0x8000000
+#define D18F3x44_NbMcaToMstCpuEn_VALUE 0x1
+#define D18F3x44_DisTgtAbortCpuErrRsp_OFFSET 28
+#define D18F3x44_DisTgtAbortCpuErrRsp_WIDTH 1
+#define D18F3x44_DisTgtAbortCpuErrRsp_MASK 0x10000000
+#define D18F3x44_DisMstAbortCpuErrRsp_OFFSET 29
+#define D18F3x44_DisMstAbortCpuErrRsp_WIDTH 1
+#define D18F3x44_DisMstAbortCpuErrRsp_MASK 0x20000000
+#define D18F3x44_SyncFloodOnDramAdrParErr_OFFSET 30
+#define D18F3x44_SyncFloodOnDramAdrParErr_WIDTH 1
+#define D18F3x44_SyncFloodOnDramAdrParErr_MASK 0x40000000
+#define D18F3x44_SyncFloodOnDramAdrParErr_VALUE 0x1
+#define D18F3x44_NbMcaLogEn_OFFSET 31
+#define D18F3x44_NbMcaLogEn_WIDTH 1
+#define D18F3x44_NbMcaLogEn_MASK 0x80000000
+
+/// D18F3x44
+typedef union {
+ struct { ///<
+ UINT32 Reserved_0_0:1 ; ///<
+ UINT32 CpuRdDatErrEn:1 ; ///<
+ UINT32 SyncFloodOnDramUcEcc:1 ; ///<
+ UINT32 SyncPktGenDis:1 ; ///<
+ UINT32 SyncPktPropDis:1 ; ///<
+ UINT32 IoMstAbortDis:1 ; ///<
+ UINT32 CpuErrDis:1 ; ///<
+ UINT32 IoErrDis:1 ; ///<
+ UINT32 WDTDis:1 ; ///<
+ UINT32 WDTCntSel_2_0_:3 ; ///<
+ UINT32 WDTBaseSel:2 ; ///<
+ UINT32 GenLinkSel:2 ; ///<
+ UINT32 GenCrcErrByte0:1 ; ///<
+ UINT32 GenCrcErrByte1:1 ; ///<
+ UINT32 GenSubLinkSel:2 ; ///<
+ UINT32 SyncFloodOnWDT:1 ; ///<
+ UINT32 SyncFloodOnAnyUcErr:1 ; ///<
+ UINT32 DramEccEn:1 ; ///<
+ UINT32 ChipKillEccCap:1 ; ///<
+ UINT32 IoRdDatErrEn:1 ; ///<
+ UINT32 DisPciCfgCpuErrRsp:1 ; ///<
+ UINT32 FlagMcaCorrErr:1 ; ///<
+ UINT32 NbMcaToMstCpuEn:1 ; ///<
+ UINT32 DisTgtAbortCpuErrRsp:1 ; ///<
+ UINT32 DisMstAbortCpuErrRsp:1 ; ///<
+ UINT32 SyncFloodOnDramAdrParErr:1 ; ///<
+ UINT32 NbMcaLogEn:1 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D18F3x44_STRUCT;
+
+// **** D18F3x64 Register Definition ****
+// Address
+#define D18F3x64_ADDRESS 0x64
+
+// Type
+#define D18F3x64_TYPE TYPE_D18F3
+// Field Data
+#define D18F3x64_HtcEn_OFFSET 0
+#define D18F3x64_HtcEn_WIDTH 1
+#define D18F3x64_HtcEn_MASK 0x1
+#define D18F3x64_HtcEn_VALUE 0x0
+#define D18F3x64_HtcAct_OFFSET 4
+#define D18F3x64_HtcAct_WIDTH 1
+#define D18F3x64_HtcAct_MASK 0x10
+#define D18F3x64_HtcActSts_OFFSET 5
+#define D18F3x64_HtcActSts_WIDTH 1
+#define D18F3x64_HtcActSts_MASK 0x20
+#define D18F3x64_PslApicHiEn_OFFSET 6
+#define D18F3x64_PslApicHiEn_WIDTH 1
+#define D18F3x64_PslApicHiEn_MASK 0x40
+#define D18F3x64_PslApicLoEn_OFFSET 7
+#define D18F3x64_PslApicLoEn_WIDTH 1
+#define D18F3x64_PslApicLoEn_MASK 0x80
+#define D18F3x64_HtcTmpLmt_OFFSET 16
+#define D18F3x64_HtcTmpLmt_WIDTH 7
+#define D18F3x64_HtcTmpLmt_MASK 0x7f0000
+#define D18F3x64_HtcSlewSel_OFFSET 23
+#define D18F3x64_HtcSlewSel_WIDTH 1
+#define D18F3x64_HtcSlewSel_MASK 0x800000
+#define D18F3x64_HtcHystLmt_OFFSET 24
+#define D18F3x64_HtcHystLmt_WIDTH 4
+#define D18F3x64_HtcHystLmt_MASK 0xf000000
+#define D18F3x64_HtcPstateLimit_OFFSET 28
+#define D18F3x64_HtcPstateLimit_WIDTH 3
+#define D18F3x64_HtcPstateLimit_MASK 0x70000000
+#define D18F3x64_Reserved_31_31_OFFSET 31
+#define D18F3x64_Reserved_31_31_WIDTH 1
+#define D18F3x64_Reserved_31_31_MASK 0x80000000
+
+/// D18F3x64
+typedef union {
+ struct { ///<
+ UINT32 HtcEn:1 ; ///<
+ UINT32 bit1:1;
+ UINT32 bit2:1;
+ UINT32 Reserved_3_3:1 ; ///<
+ UINT32 HtcAct:1 ; ///<
+ UINT32 HtcActSts:1 ; ///<
+ UINT32 PslApicHiEn:1 ; ///<
+ UINT32 PslApicLoEn:1 ; ///<
+ UINT32 bit10_8:3;
+ UINT32 Reserved_11_11:1 ; ///<
+ UINT32 bit14_12:3 ;
+ UINT32 Reserved_15_15:1 ; ///<
+ UINT32 HtcTmpLmt:7 ; ///<
+ UINT32 HtcSlewSel:1 ; ///<
+ UINT32 HtcHystLmt:4 ; ///<
+ UINT32 HtcPstateLimit:3 ; ///<
+ UINT32 Reserved_31_31:1 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D18F3x64_STRUCT;
+
+
+// **** D18F3xA0 Register Definition ****
+// Address
+#define D18F3xA0_ADDRESS 0xa0
+
+// Type
+#define D18F3xA0_TYPE TYPE_D18F3
+// Field Data
+#define D18F3xA0_PsiVid_6_0__OFFSET 0
+#define D18F3xA0_PsiVid_6_0__WIDTH 7
+#define D18F3xA0_PsiVid_6_0__MASK 0x7f
+#define D18F3xA0_PsiVidEn_OFFSET 7
+#define D18F3xA0_PsiVidEn_WIDTH 1
+#define D18F3xA0_PsiVidEn_MASK 0x80
+#define D18F3xA0_PsiVid_7__OFFSET 8
+#define D18F3xA0_PsiVid_7__WIDTH 1
+#define D18F3xA0_PsiVid_7__MASK 0x100
+#define D18F3xA0_Reserved_9_9_OFFSET 9
+#define D18F3xA0_Reserved_9_9_WIDTH 1
+#define D18F3xA0_Reserved_9_9_MASK 0x200
+#define D18F3xA0_IdleExitEn_OFFSET 10
+#define D18F3xA0_IdleExitEn_WIDTH 1
+#define D18F3xA0_IdleExitEn_MASK 0x400
+#define D18F3xA0_PllLockTime_OFFSET 11
+#define D18F3xA0_PllLockTime_WIDTH 3
+#define D18F3xA0_PllLockTime_MASK 0x3800
+#define D18F3xA0_PllLockTime_VALUE 0x1
+#define D18F3xA0_Svi2HighFreqSel_OFFSET 14
+#define D18F3xA0_Svi2HighFreqSel_WIDTH 1
+#define D18F3xA0_Svi2HighFreqSel_MASK 0x4000
+#define D18F3xA0_Svi2HighFreqSel_VALUE 0x1
+#define D18F3xA0_ConfigId_OFFSET 16
+#define D18F3xA0_ConfigId_WIDTH 12
+#define D18F3xA0_ConfigId_MASK 0xfff0000
+#define D18F3xA0_Reserved_29_29_OFFSET 29
+#define D18F3xA0_Reserved_29_29_WIDTH 1
+#define D18F3xA0_Reserved_29_29_MASK 0x20000000
+#define D18F3xA0_CofVidProg_OFFSET 31
+#define D18F3xA0_CofVidProg_WIDTH 1
+#define D18F3xA0_CofVidProg_MASK 0x80000000
+
+/// D18F3xA0
+typedef union {
+ struct { ///<
+ UINT32 PsiVid_6_0_:7 ; ///<
+ UINT32 PsiVidEn:1 ; ///<
+ UINT32 PsiVid_7_:1 ; ///<
+ UINT32 Reserved_9_9:1 ; ///<
+ UINT32 IdleExitEn:1 ; ///<
+ UINT32 PllLockTime:3 ; ///<
+ UINT32 Svi2HighFreqSel:1 ; ///<
+ UINT32 :1 ; ///<
+ UINT32 ConfigId:12; ///<
+ UINT32 :1 ; ///<
+ UINT32 Reserved_29_29:1 ; ///<
+ UINT32 :1 ; ///<
+ UINT32 CofVidProg:1 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D18F3xA0_STRUCT;
+
+
+// **** D18F3xA8 Register Definition ****
+// Address
+#define D18F3xA8_ADDRESS 0xA8
+// Type
+#define D18F3xA8_TYPE TYPE_D18F3
+
+// Field Data
+#define D18F3xA8_Reserved_28_0_OFFSET 0
+#define D18F3xA8_Reserved_28_0_WIDTH 29
+#define D18F3xA8_Reserved_28_0_MASK 0x1FFFFFFF
+#define D18F3xA8_PopDownPstate_OFFSET 29
+#define D18F3xA8_PopDownPstate_WIDTH 3
+#define D18F3xA8_PopDownPstate_MASK 0xE0000000
+
+/// D18F3xA8
+typedef union {
+ struct { ///<
+ UINT32 Reserved_28_0:29; ///<
+ UINT32 PopDownPstate:3; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D18F3xA8_STRUCT;
+
+// **** D18F5x12C Register Definition ****
+// Address
+#define D18F5x12C_ADDRESS 0x12C
+// Type
+#define D18F5x12C_TYPE TYPE_D18F5
+
+// Field Data
+#define D18F5x12C_CoreOffsetTrim_OFFSET 0
+#define D18F5x12C_CoreOffsetTrim_WIDTH 2
+#define D18F5x12C_CoreOffsetTrim_MASK 0x3
+#define D18F5x12C_CoreLoadLineTrim_OFFSET 2
+#define D18F5x12C_CoreLoadLineTrim_WIDTH 3
+#define D18F5x12C_CoreLoadLineTrim_MASK 0x1C
+#define D18F5x12C_CorePsi1En_OFFSET 5
+#define D18F5x12C_CorePsi1En_WIDTH 1
+#define D18F5x12C_CorePsi1En_MASK 0x20
+#define D18F5x12C_RAZ_29_7_OFFSET 7
+#define D18F5x12C_RAZ_29_7_WIDTH 23
+#define D18F5x12C_RAZ_29_7_MASK 0x3FFFFF80
+#define D18F5x12C_WaitVidCompDis_OFFSET 30
+#define D18F5x12C_WaitVidCompDis_WIDTH 1
+#define D18F5x12C_WaitVidCompDis_MASK 0x40000000
+#define D18F5x12C_Svi2CmdBusy_OFFSET 31
+#define D18F5x12C_Svi2CmdBusy_WIDTH 1
+#define D18F5x12C_Svi2CmdBusy_MASK 0x80000000
+
+/// D18F5x12C
+typedef union {
+ struct { ///<
+ UINT32 CoreOffsetTrim:2; ///<
+ UINT32 CoreLoadLineTrim:3; ///<
+ UINT32 CorePsi1En:1; ///<
+ UINT32 :1; ///<
+ UINT32 RAZ_29_7:23; ///<
+ UINT32 WaitVidCompDis:1; ///<
+ UINT32 Svi2CmdBusy:1; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D18F5x12C_STRUCT;
+
+// **** D18F5x178 Register Definition ****
+// Address
+#define D18F5x178_ADDRESS 0x178
+// Type
+#define D18F5x178_TYPE TYPE_D18F5
+
+// Field Data
+#define D18F5x178_Reserved_1_0_OFFSET 0
+#define D18F5x178_Reserved_1_0_WIDTH 2
+#define D18F5x178_Reserved_1_0_MASK 0x3
+#define D18F5x178_CstateFusionDis_OFFSET 2
+#define D18F5x178_CstateFusionDis_WIDTH 1
+#define D18F5x178_CstateFusionDis_MASK 0x4
+#define D18F5x178_CstateThreeWayHsEn_OFFSET 3
+#define D18F5x178_CstateThreeWayHsEn_WIDTH 1
+#define D18F5x178_CstateThreeWayHsEn_MASK 0x8
+#define D18F5x178_Reserved_17_4_OFFSET 4
+#define D18F5x178_Reserved_17_4_WIDTH 14
+#define D18F5x178_Reserved_17_4_MASK 0x3FFF0
+#define D18F5x178_CstateFusionHsDis_OFFSET 18
+#define D18F5x178_CstateFusionHsDis_WIDTH 1
+#define D18F5x178_CstateFusionHsDis_MASK 0x40000
+#define D18F5x178_SwGfxDis_OFFSET 19
+#define D18F5x178_SwGfxDis_WIDTH 1
+#define D18F5x178_SwGfxDis_MASK 0x80000
+#define D18F5x178_Reserved_31_20_OFFSET 20
+#define D18F5x178_Reserved_31_20_WIDTH 12
+#define D18F5x178_Reserved_31_20_MASK 0xFFF00000
+
+/// D18F5x178
+typedef union {
+ struct { ///<
+ UINT32 Reserved_1_0:2; ///<
+ UINT32 CstateFusionDis:1; ///<
+ UINT32 CstateThreeWayHsEn:1; ///<
+ UINT32 Reserved_17_4:14; ///<
+ UINT32 CstateFusionHsDis:1; ///<
+ UINT32 SwGfxDis:1; ///<
+ UINT32 Reserved_31_20:12; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D18F5x178_STRUCT;
+
+// **** D18F5x188 Register Definition ****
+// Address
+#define D18F5x188_ADDRESS 0x188
+// Type
+#define D18F5x188_TYPE TYPE_D18F5
+
+// Field Data
+#define D18F5x188_NbOffsetTrim_OFFSET 0
+#define D18F5x188_NbOffsetTrim_WIDTH 2
+#define D18F5x188_NbOffsetTrim_MASK 0x3
+#define D18F5x188_NbLoadLineTrim_OFFSET 2
+#define D18F5x188_NbLoadLineTrim_WIDTH 3
+#define D18F5x188_NbLoadLineTrim_MASK 0x1C
+#define D18F5x188_NbPsi1_OFFSET 5
+#define D18F5x188_NbPsi1_WIDTH 1
+#define D18F5x188_NbPsi1_MASK 0x20
+#define D18F5x188_RAZ_31_7_OFFSET 7
+#define D18F5x188_RAZ_31_7_WIDTH 25
+#define D18F5x188_RAZ_31_7_MASK 0xFFFFFF80
+
+/// D18F5x188
+typedef union {
+ struct { ///<
+ UINT32 NbOffsetTrim:2; ///<
+ UINT32 NbLoadLineTrim:3; ///<
+ UINT32 NbPsi1:1; ///<
+ UINT32 :1; ///<
+ UINT32 RAZ_31_7:25; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D18F5x188_STRUCT;
+
+// **** D0F0x04 Register Definition ****
+// Address
+#define D0F0x04_ADDRESS 0x4
+// Type
+#define D0F0x04_TYPE TYPE_D0F0
+
+// Field Data
+#define D0F0x04_IoAccessEn_OFFSET 0
+#define D0F0x04_IoAccessEn_WIDTH 1
+#define D0F0x04_IoAccessEn_MASK 0x1
+#define D0F0x04_MemAccessEn_OFFSET 1
+#define D0F0x04_MemAccessEn_WIDTH 1
+#define D0F0x04_MemAccessEn_MASK 0x2
+#define D0F0x04_BusMasterEn_OFFSET 2
+#define D0F0x04_BusMasterEn_WIDTH 1
+#define D0F0x04_BusMasterEn_MASK 0x4
+#define D0F0x04_Reserved_19_3_OFFSET 3
+#define D0F0x04_Reserved_19_3_WIDTH 17
+#define D0F0x04_Reserved_19_3_MASK 0xFFFF8
+#define D0F0x04_CapList_OFFSET 20
+#define D0F0x04_CapList_WIDTH 1
+#define D0F0x04_CapList_MASK 0x100000
+#define D0F0x04_Reserved_31_21_OFFSET 21
+#define D0F0x04_Reserved_31_21_WIDTH 11
+#define D0F0x04_Reserved_31_21_MASK 0xFFE00000
+
+/// D0F0x04
+typedef union {
+ struct { ///<
+ UINT32 IoAccessEn:1; ///<
+ UINT32 MemAccessEn:1; ///<
+ UINT32 BusMasterEn:1; ///<
+ UINT32 Reserved_19_3:17; ///<
+ UINT32 CapList:1; ///<
+ UINT32 Reserved_31_21:11; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x04_STRUCT;
+
+// **** D0F0x64 Register Definition ****
+// Address
+#define D0F0x64_ADDRESS 0x64
+// Type
+#define D0F0x64_TYPE TYPE_D0F0
+
+// Field Data
+#define D0F0x64_MiscIndData_OFFSET 0
+#define D0F0x64_MiscIndData_WIDTH 32
+#define D0F0x64_MiscIndData_MASK 0xFFFFFFFF
+
+/// D0F0x64
+typedef union {
+ struct { ///<
+ UINT32 MiscIndData:32; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x64_STRUCT;
+
+// **** DxF0x3C Register Definition ****
+// Address
+#define DxF0x3C_ADDRESS 0x3c
+
+// Type
+#define DxF0x3C_TYPE TYPE_D4F0
+// Field Data
+#define DxF0x3C_IntLine_OFFSET 0
+#define DxF0x3C_IntLine_WIDTH 8
+#define DxF0x3C_IntLine_MASK 0xff
+#define DxF0x3C_IntPin_OFFSET 8
+#define DxF0x3C_IntPin_WIDTH 3
+#define DxF0x3C_IntPin_MASK 0x700
+#define DxF0x3C_IntPinR_OFFSET 11
+#define DxF0x3C_IntPinR_WIDTH 5
+#define DxF0x3C_IntPinR_MASK 0xf800
+#define DxF0x3C_ParityResponseEn_OFFSET 16
+#define DxF0x3C_ParityResponseEn_WIDTH 1
+#define DxF0x3C_ParityResponseEn_MASK 0x10000
+#define DxF0x3C_SerrEn_OFFSET 17
+#define DxF0x3C_SerrEn_WIDTH 1
+#define DxF0x3C_SerrEn_MASK 0x20000
+#define DxF0x3C_IsaEn_OFFSET 18
+#define DxF0x3C_IsaEn_WIDTH 1
+#define DxF0x3C_IsaEn_MASK 0x40000
+#define DxF0x3C_VgaEn_OFFSET 19
+#define DxF0x3C_VgaEn_WIDTH 1
+#define DxF0x3C_VgaEn_MASK 0x80000
+#define DxF0x3C_Vga16En_OFFSET 20
+#define DxF0x3C_Vga16En_WIDTH 1
+#define DxF0x3C_Vga16En_MASK 0x100000
+#define DxF0x3C_MasterAbortMode_OFFSET 21
+#define DxF0x3C_MasterAbortMode_WIDTH 1
+#define DxF0x3C_MasterAbortMode_MASK 0x200000
+#define DxF0x3C_SecondaryBusReset_OFFSET 22
+#define DxF0x3C_SecondaryBusReset_WIDTH 1
+#define DxF0x3C_SecondaryBusReset_MASK 0x400000
+#define DxF0x3C_FastB2BCap_OFFSET 23
+#define DxF0x3C_FastB2BCap_WIDTH 1
+#define DxF0x3C_FastB2BCap_MASK 0x800000
+#define DxF0x3C_Reserved_31_24_OFFSET 24
+#define DxF0x3C_Reserved_31_24_WIDTH 8
+#define DxF0x3C_Reserved_31_24_MASK 0xff000000
+
+/// DxF0x3C
+typedef union {
+ struct { ///<
+ UINT32 IntLine:8 ; ///<
+ UINT32 IntPin:3 ; ///<
+ UINT32 IntPinR:5 ; ///<
+ UINT32 ParityResponseEn:1 ; ///<
+ UINT32 SerrEn:1 ; ///<
+ UINT32 IsaEn:1 ; ///<
+ UINT32 VgaEn:1 ; ///<
+ UINT32 Vga16En:1 ; ///<
+ UINT32 MasterAbortMode:1 ; ///<
+ UINT32 SecondaryBusReset:1 ; ///<
+ UINT32 FastB2BCap:1 ; ///<
+ UINT32 Reserved_31_24:8 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} DxF0x3C_STRUCT;
+
+// **** DxF0x58 Register Definition ****
+// Address
+#define DxF0x58_ADDRESS 0x58
+
+// Type
+#define DxF0x58_TYPE TYPE_D4F0
+// Field Data
+#define DxF0x58_CapID_OFFSET 0
+#define DxF0x58_CapID_WIDTH 8
+#define DxF0x58_CapID_MASK 0xff
+#define DxF0x58_NextPtr_OFFSET 8
+#define DxF0x58_NextPtr_WIDTH 8
+#define DxF0x58_NextPtr_MASK 0xff00
+#define DxF0x58_Version_OFFSET 16
+#define DxF0x58_Version_WIDTH 4
+#define DxF0x58_Version_MASK 0xf0000
+#define DxF0x58_DeviceType_OFFSET 20
+#define DxF0x58_DeviceType_WIDTH 4
+#define DxF0x58_DeviceType_MASK 0xf00000
+#define DxF0x58_SlotImplemented_OFFSET 24
+#define DxF0x58_SlotImplemented_WIDTH 1
+#define DxF0x58_SlotImplemented_MASK 0x1000000
+#define DxF0x58_IntMessageNum_OFFSET 25
+#define DxF0x58_IntMessageNum_WIDTH 5
+#define DxF0x58_IntMessageNum_MASK 0x3e000000
+#define DxF0x58_Reserved_31_30_OFFSET 30
+#define DxF0x58_Reserved_31_30_WIDTH 2
+#define DxF0x58_Reserved_31_30_MASK 0xc0000000
+
+/// DxF0x58
+typedef union {
+ struct { ///<
+ UINT32 CapID:8 ; ///<
+ UINT32 NextPtr:8 ; ///<
+ UINT32 Version:4 ; ///<
+ UINT32 DeviceType:4 ; ///<
+ UINT32 SlotImplemented:1 ; ///<
+ UINT32 IntMessageNum:5 ; ///<
+ UINT32 Reserved_31_30:2 ; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} DxF0x58_STRUCT;
+
+// **** DxFxx68 Register Definition ****
+// Address
+#define DxFxx68_ADDRESS 0x68
+// Type
+#define DxFxx68_TYPE TYPE_D2F1
+
+// Field Data
+#define DxFxx68_PmControl_OFFSET 0
+#define DxFxx68_PmControl_WIDTH 2
+#define DxFxx68_PmControl_MASK 0x3
+#define DxFxx68_Reserved_2_2_OFFSET 2
+#define DxFxx68_Reserved_2_2_WIDTH 1
+#define DxFxx68_Reserved_2_2_MASK 0x4
+#define DxFxx68_ReadCplBoundary_OFFSET 3
+#define DxFxx68_ReadCplBoundary_WIDTH 1
+#define DxFxx68_ReadCplBoundary_MASK 0x8
+#define DxFxx68_LinkDis_OFFSET 4
+#define DxFxx68_LinkDis_WIDTH 1
+#define DxFxx68_LinkDis_MASK 0x10
+#define DxFxx68_RetrainLink_OFFSET 5
+#define DxFxx68_RetrainLink_WIDTH 1
+#define DxFxx68_RetrainLink_MASK 0x20
+#define DxFxx68_CommonClockCfg_OFFSET 6
+#define DxFxx68_CommonClockCfg_WIDTH 1
+#define DxFxx68_CommonClockCfg_MASK 0x40
+#define DxFxx68_ExtendedSync_OFFSET 7
+#define DxFxx68_ExtendedSync_WIDTH 1
+#define DxFxx68_ExtendedSync_MASK 0x80
+#define DxFxx68_ClockPowerManagementEn_OFFSET 8
+#define DxFxx68_ClockPowerManagementEn_WIDTH 1
+#define DxFxx68_ClockPowerManagementEn_MASK 0x100
+#define DxFxx68_HWAutonomousWidthDisable_OFFSET 9
+#define DxFxx68_HWAutonomousWidthDisable_WIDTH 1
+#define DxFxx68_HWAutonomousWidthDisable_MASK 0x200
+#define DxFxx68_LinkBWManagementEn_OFFSET 10
+#define DxFxx68_LinkBWManagementEn_WIDTH 1
+#define DxFxx68_LinkBWManagementEn_MASK 0x400
+#define DxFxx68_LinkAutonomousBWIntEn_OFFSET 11
+#define DxFxx68_LinkAutonomousBWIntEn_WIDTH 1
+#define DxFxx68_LinkAutonomousBWIntEn_MASK 0x800
+#define DxFxx68_Reserved_15_12_OFFSET 12
+#define DxFxx68_Reserved_15_12_WIDTH 4
+#define DxFxx68_Reserved_15_12_MASK 0xF000
+#define DxFxx68_LinkSpeed_OFFSET 16
+#define DxFxx68_LinkSpeed_WIDTH 4
+#define DxFxx68_LinkSpeed_MASK 0xF0000
+#define DxFxx68_NegotiatedLinkWidth_OFFSET 20
+#define DxFxx68_NegotiatedLinkWidth_WIDTH 6
+#define DxFxx68_NegotiatedLinkWidth_MASK 0x3F00000
+#define DxFxx68_Reserved_26_26_OFFSET 26
+#define DxFxx68_Reserved_26_26_WIDTH 1
+#define DxFxx68_Reserved_26_26_MASK 0x4000000
+#define DxFxx68_LinkTraining_OFFSET 27
+#define DxFxx68_LinkTraining_WIDTH 1
+#define DxFxx68_LinkTraining_MASK 0x8000000
+#define DxFxx68_SlotClockCfg_OFFSET 28
+#define DxFxx68_SlotClockCfg_WIDTH 1
+#define DxFxx68_SlotClockCfg_MASK 0x10000000
+#define DxFxx68_DlActive_OFFSET 29
+#define DxFxx68_DlActive_WIDTH 1
+#define DxFxx68_DlActive_MASK 0x20000000
+#define DxFxx68_LinkBWManagementStatus_OFFSET 30
+#define DxFxx68_LinkBWManagementStatus_WIDTH 1
+#define DxFxx68_LinkBWManagementStatus_MASK 0x40000000
+#define DxFxx68_LinkAutonomousBWStatus_OFFSET 31
+#define DxFxx68_LinkAutonomousBWStatus_WIDTH 1
+#define DxFxx68_LinkAutonomousBWStatus_MASK 0x80000000
+
+/// DxFxx68
+typedef union {
+ struct { ///<
+ UINT32 PmControl:2; ///<
+ UINT32 Reserved_2_2:1; ///<
+ UINT32 ReadCplBoundary:1; ///<
+ UINT32 LinkDis:1; ///<
+ UINT32 RetrainLink:1; ///<
+ UINT32 CommonClockCfg:1; ///<
+ UINT32 ExtendedSync:1; ///<
+ UINT32 ClockPowerManagementEn:1; ///<
+ UINT32 HWAutonomousWidthDisable:1; ///<
+ UINT32 LinkBWManagementEn:1; ///<
+ UINT32 LinkAutonomousBWIntEn:1; ///<
+ UINT32 Reserved_15_12:4; ///<
+ UINT32 LinkSpeed:4; ///<
+ UINT32 NegotiatedLinkWidth:6; ///<
+ UINT32 Reserved_26_26:1; ///<
+ UINT32 LinkTraining:1; ///<
+ UINT32 SlotClockCfg:1; ///<
+ UINT32 DlActive:1; ///<
+ UINT32 LinkBWManagementStatus:1; ///<
+ UINT32 LinkAutonomousBWStatus:1; ///<
+
+ } Field;
+
+ UINT32 Value;
+} DxFxx68_STRUCT;
+
+// **** D0F0x7C Register Definition ****
+// Address
+#define D0F0x7C_ADDRESS 0x7C
+// Type
+#define D0F0x7C_TYPE TYPE_D0F0
+
+// Field Data
+#define D0F0x7C_ForceIntGfxDisable_OFFSET 0
+#define D0F0x7C_ForceIntGfxDisable_WIDTH 1
+#define D0F0x7C_ForceIntGfxDisable_MASK 0x1
+#define D0F0x7C_Reserved_31_1_OFFSET 1
+#define D0F0x7C_Reserved_31_1_WIDTH 31
+#define D0F0x7C_Reserved_31_1_MASK 0xFFFFFFFE
+
+/// D0F0x7C
+typedef union {
+ struct { ///<
+ UINT32 ForceIntGfxDisable:1; ///<
+ UINT32 Reserved_31_1:31; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x7C_STRUCT;
+
+// **** D0F0x98 Register Definition ****
+// Address
+#define D0F0x98_ADDRESS 0x98
+// Type
+#define D0F0x98_TYPE TYPE_D0F0
+
+// Field Data
+#define D0F0x98_OrbIndData_OFFSET 0
+#define D0F0x98_OrbIndData_WIDTH 32
+#define D0F0x98_OrbIndData_MASK 0xFFFFFFFF
+
+/// D0F0x98
+typedef union {
+ struct { ///<
+ UINT32 OrbIndData:32; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x98_STRUCT;
+
+// **** D0F0xBC Register Definition ****
+// Address
+#define D0F0xBC_ADDRESS 0xBC
+// Type
+#define D0F0xBC_TYPE TYPE_D0F0
+
+// Field Data
+#define D0F0xBC_NbSmuIndData_OFFSET 0
+#define D0F0xBC_NbSmuIndData_WIDTH 32
+#define D0F0xBC_NbSmuIndData_MASK 0xFFFFFFFF
+
+/// D0F0xBC
+typedef union {
+ struct { ///<
+ UINT32 NbSmuIndData:32; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xBC_STRUCT;
+
+// **** D0F0xC8 Register Definition ****
+// Address
+#define D0F0xC8_ADDRESS 0xC8
+// Type
+#define D0F0xC8_TYPE TYPE_D0F0
+
+// Field Data
+#define D0F0xC8_NbDevIndAddr_OFFSET 0
+#define D0F0xC8_NbDevIndAddr_WIDTH 7
+#define D0F0xC8_NbDevIndAddr_MASK 0x7F
+#define D0F0xC8_Reserved_15_7_OFFSET 7
+#define D0F0xC8_Reserved_15_7_WIDTH 9
+#define D0F0xC8_Reserved_15_7_MASK 0xFF80
+#define D0F0xC8_NbDevIndSel_OFFSET 16
+#define D0F0xC8_NbDevIndSel_WIDTH 8
+#define D0F0xC8_NbDevIndSel_MASK 0xFF0000
+#define D0F0xC8_Reserved_31_24_OFFSET 24
+#define D0F0xC8_Reserved_31_24_WIDTH 8
+#define D0F0xC8_Reserved_31_24_MASK 0xFF000000
+
+/// D0F0xC8
+typedef union {
+ struct { ///<
+ UINT32 NbDevIndAddr:7; ///<
+ UINT32 Reserved_15_7:9; ///<
+ UINT32 NbDevIndSel:8; ///<
+ UINT32 Reserved_31_24:8; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xC8_STRUCT;
+
+// **** D0F0xCC Register Definition ****
+// Address
+#define D0F0xCC_ADDRESS 0xCC
+// Type
+#define D0F0xCC_TYPE TYPE_D0F0
+
+// Field Data
+#define D0F0xCC_NbDevIndData_OFFSET 0
+#define D0F0xCC_NbDevIndData_WIDTH 32
+#define D0F0xCC_NbDevIndData_MASK 0xFFFFFFFF
+
+/// D0F0xCC
+typedef union {
+ struct { ///<
+ UINT32 NbDevIndData:32; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xCC_STRUCT;
+
+// **** D0F0xE4 Register Definition ****
+// Address
+#define D0F0xE4_ADDRESS 0xE4
+// Type
+#define D0F0xE4_TYPE TYPE_D0F0
+
+// Field Data
+#define D0F0xE4_PcieIndxData_OFFSET 0
+#define D0F0xE4_PcieIndxData_WIDTH 32
+#define D0F0xE4_PcieIndxData_MASK 0xFFFFFFFF
+
+/// D0F0xE4
+typedef union {
+ struct { ///<
+ UINT32 PcieIndxData:32; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_STRUCT;
+
+// **** DxFxxE4_x6A Register Definition ****
+// Address
+#define DxFxxE4_x6A_ADDRESS 0x6A
+// Type
+#define DxFxxE4_x6A_TYPE TYPE_D2F1xE4
+
+// Field Data
+#define DxFxxE4_x6A_ErrReportingDis_OFFSET 0
+#define DxFxxE4_x6A_ErrReportingDis_WIDTH 1
+#define DxFxxE4_x6A_ErrReportingDis_MASK 0x1
+
+// **** DxFxxE4_xA2 Register Definition ****
+// Address
+#define DxFxxE4_xA2_ADDRESS 0xA2
+// Type
+#define DxFxxE4_xA2_TYPE TYPE_D2F1xE4
+
+// Field Data
+#define DxFxxE4_xA2_LcLinkWidth_OFFSET 0
+#define DxFxxE4_xA2_LcLinkWidth_WIDTH 3
+#define DxFxxE4_xA2_LcLinkWidth_MASK 0x7
+#define DxFxxE4_xA2_Reserved_3_3_OFFSET 3
+#define DxFxxE4_xA2_Reserved_3_3_WIDTH 1
+#define DxFxxE4_xA2_Reserved_3_3_MASK 0x8
+#define DxFxxE4_xA2_LcLinkWidthRd_OFFSET 4
+#define DxFxxE4_xA2_LcLinkWidthRd_WIDTH 3
+#define DxFxxE4_xA2_LcLinkWidthRd_MASK 0x70
+#define DxFxxE4_xA2_LcReconfigArcMissingEscape_OFFSET 7
+#define DxFxxE4_xA2_LcReconfigArcMissingEscape_WIDTH 1
+#define DxFxxE4_xA2_LcReconfigArcMissingEscape_MASK 0x80
+#define DxFxxE4_xA2_LcReconfigNow_OFFSET 8
+#define DxFxxE4_xA2_LcReconfigNow_WIDTH 1
+#define DxFxxE4_xA2_LcReconfigNow_MASK 0x100
+#define DxFxxE4_xA2_LcRenegotiationSupport_OFFSET 9
+#define DxFxxE4_xA2_LcRenegotiationSupport_WIDTH 1
+#define DxFxxE4_xA2_LcRenegotiationSupport_MASK 0x200
+#define DxFxxE4_xA2_LcRenegotiateEn_OFFSET 10
+#define DxFxxE4_xA2_LcRenegotiateEn_WIDTH 1
+#define DxFxxE4_xA2_LcRenegotiateEn_MASK 0x400
+#define DxFxxE4_xA2_LcShortReconfigEn_OFFSET 11
+#define DxFxxE4_xA2_LcShortReconfigEn_WIDTH 1
+#define DxFxxE4_xA2_LcShortReconfigEn_MASK 0x800
+#define DxFxxE4_xA2_LcUpconfigureSupport_OFFSET 12
+#define DxFxxE4_xA2_LcUpconfigureSupport_WIDTH 1
+#define DxFxxE4_xA2_LcUpconfigureSupport_MASK 0x1000
+#define DxFxxE4_xA2_LcUpconfigureDis_OFFSET 13
+#define DxFxxE4_xA2_LcUpconfigureDis_WIDTH 1
+#define DxFxxE4_xA2_LcUpconfigureDis_MASK 0x2000
+#define DxFxxE4_xA2_Reserved_19_14_OFFSET 14
+#define DxFxxE4_xA2_Reserved_19_14_WIDTH 6
+#define DxFxxE4_xA2_Reserved_19_14_MASK 0xFC000
+#define DxFxxE4_xA2_LcUpconfigCapable_OFFSET 20
+#define DxFxxE4_xA2_LcUpconfigCapable_WIDTH 1
+#define DxFxxE4_xA2_LcUpconfigCapable_MASK 0x100000
+#define DxFxxE4_xA2_LcDynLanesPwrState_OFFSET 21
+#define DxFxxE4_xA2_LcDynLanesPwrState_WIDTH 2
+#define DxFxxE4_xA2_LcDynLanesPwrState_MASK 0x600000
+#define DxFxxE4_xA2_Reserved_31_23_OFFSET 23
+#define DxFxxE4_xA2_Reserved_31_23_WIDTH 9
+#define DxFxxE4_xA2_Reserved_31_23_MASK 0xFF800000
+
+/// DxFxxE4_xA2
+typedef union {
+ struct { ///<
+ UINT32 LcLinkWidth:3; ///<
+ UINT32 Reserved_3_3:1; ///<
+ UINT32 LcLinkWidthRd:3; ///<
+ UINT32 LcReconfigArcMissingEscape:1; ///<
+ UINT32 LcReconfigNow:1; ///<
+ UINT32 LcRenegotiationSupport:1; ///<
+ UINT32 LcRenegotiateEn:1; ///<
+ UINT32 LcShortReconfigEn:1; ///<
+ UINT32 LcUpconfigureSupport:1; ///<
+ UINT32 LcUpconfigureDis:1; ///<
+ UINT32 Reserved_19_14:6; ///<
+ UINT32 LcUpconfigCapable:1; ///<
+ UINT32 LcDynLanesPwrState:2; ///<
+ UINT32 Reserved_31_23:9; ///<
+
+ } Field;
+
+ UINT32 Value;
+} DxFxxE4_xA2_STRUCT;
+
+// **** DxFxx128 Register Definition ****
+// Address
+#define DxFxx128_ADDRESS 0x128
+// Type
+#define DxFxx128_TYPE TYPE_D2F1
+
+// Field Data
+#define DxFxx128_Reserved_15_0_OFFSET 0
+#define DxFxx128_Reserved_15_0_WIDTH 16
+#define DxFxx128_Reserved_15_0_MASK 0xFFFF
+#define DxFxx128_PortArbTableStatus_OFFSET 16
+#define DxFxx128_PortArbTableStatus_WIDTH 1
+#define DxFxx128_PortArbTableStatus_MASK 0x10000
+#define DxFxx128_VcNegotiationPending_OFFSET 17
+#define DxFxx128_VcNegotiationPending_WIDTH 1
+#define DxFxx128_VcNegotiationPending_MASK 0x20000
+#define DxFxx128_Reserved_31_18_OFFSET 18
+#define DxFxx128_Reserved_31_18_WIDTH 14
+#define DxFxx128_Reserved_31_18_MASK 0xFFFC0000
+
+/// DxFxx128
+typedef union {
+ struct { ///<
+ UINT32 Reserved_15_0:16; ///<
+ UINT32 PortArbTableStatus:1; ///<
+ UINT32 VcNegotiationPending:1; ///<
+ UINT32 Reserved_31_18:14; ///<
+
+ } Field;
+
+ UINT32 Value;
+} DxFxx128_STRUCT;
+
+// **** D0F0x64_x0D Register Definition ****
+// Address
+#define D0F0x64_x0D_ADDRESS 0xD
+// Type
+#define D0F0x64_x0D_TYPE TYPE_D0F0x64
+
+// Field Data
+#define D0F0x64_x0D_PciDev0Fn2RegEn_OFFSET 0
+#define D0F0x64_x0D_PciDev0Fn2RegEn_WIDTH 1
+#define D0F0x64_x0D_PciDev0Fn2RegEn_MASK 0x1
+#define D0F0x64_x0D_Reserved_30_1_OFFSET 1
+#define D0F0x64_x0D_Reserved_30_1_WIDTH 30
+#define D0F0x64_x0D_Reserved_30_1_MASK 0x7FFFFFFE
+#define D0F0x64_x0D_IommuDis_OFFSET 31
+#define D0F0x64_x0D_IommuDis_WIDTH 1
+#define D0F0x64_x0D_IommuDis_MASK 0x80000000
+
+/// D0F0x64_x0D
+typedef union {
+ struct { ///<
+ UINT32 PciDev0Fn2RegEn:1; ///<
+ UINT32 Reserved_30_1:30; ///<
+ UINT32 IommuDis:1; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x64_x0D_STRUCT;
+
+// **** D0F0x64_x16 Register Definition ****
+// Address
+#define D0F0x64_x16_ADDRESS 0x16
+
+// Type
+#define D0F0x64_x16_TYPE TYPE_D0F0x64
+// Field Data
+#define D0F0x64_x16_AerUrMsgEn_OFFSET 0
+#define D0F0x64_x16_AerUrMsgEn_WIDTH 1
+#define D0F0x64_x16_AerUrMsgEn_MASK 0x1
+#define D0F0x64_x16_Reserved_31_1_OFFSET 1
+#define D0F0x64_x16_Reserved_31_1_WIDTH 31
+#define D0F0x64_x16_Reserved_31_1_MASK 0xfffffffe
+
+/// D0F0x64_x16
+typedef union {
+ struct { ///<
+ UINT32 AerUrMsgEn:1 ; ///<
+ UINT32 Reserved_31_1:31; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x64_x16_STRUCT;
+
+// **** D0F0x64_x1D Register Definition ****
+// Address
+#define D0F0x64_x1D_ADDRESS 0x1D
+// Type
+#define D0F0x64_x1D_TYPE TYPE_D0F0x64
+
+// Field Data
+#define D0F0x64_x1D_Reserved_0_0_OFFSET 0
+#define D0F0x64_x1D_Reserved_0_0_WIDTH 1
+#define D0F0x64_x1D_Reserved_0_0_MASK 0x1
+#define D0F0x64_x1D_VgaEn_OFFSET 1
+#define D0F0x64_x1D_VgaEn_WIDTH 1
+#define D0F0x64_x1D_VgaEn_MASK 0x2
+#define D0F0x64_x1D_Reserved_2_2_OFFSET 2
+#define D0F0x64_x1D_Reserved_2_2_WIDTH 1
+#define D0F0x64_x1D_Reserved_2_2_MASK 0x4
+#define D0F0x64_x1D_Vga16En_OFFSET 3
+#define D0F0x64_x1D_Vga16En_WIDTH 1
+#define D0F0x64_x1D_Vga16En_MASK 0x8
+#define D0F0x64_x1D_Reserved_31_4_OFFSET 4
+#define D0F0x64_x1D_Reserved_31_4_WIDTH 28
+#define D0F0x64_x1D_Reserved_31_4_MASK 0xFFFFFFF0
+
+/// D0F0x64_x1D
+typedef union {
+ struct { ///<
+ UINT32 Reserved_0_0:1; ///<
+ UINT32 VgaEn:1; ///<
+ UINT32 Reserved_2_2:1; ///<
+ UINT32 Vga16En:1; ///<
+ UINT32 Reserved_31_4:28; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x64_x1D_STRUCT;
+
+// **** D0F0x64_x22 Register Definition ****
+// Address
+#define D0F0x64_x22_ADDRESS 0x22
+// Type
+#define D0F0x64_x22_TYPE TYPE_D0F0x64
+
+
+// **** D0F0x64_x23 Register Definition ****
+// Address
+#define D0F0x64_x23_ADDRESS 0x23
+// Type
+#define D0F0x64_x23_TYPE TYPE_D0F0x64
+
+
+// **** D0F0x64_x30 Register Definition ****
+// Address
+#define D0F0x64_x30_ADDRESS 0x30
+// Type
+#define D0F0x64_x30_TYPE TYPE_D0F0x64
+
+// Field Data
+#define D0F0x64_x30_DevFnMap_OFFSET 0
+#define D0F0x64_x30_DevFnMap_WIDTH 8
+#define D0F0x64_x30_DevFnMap_MASK 0xFF
+#define D0F0x64_x30_Reserved_31_8_OFFSET 8
+#define D0F0x64_x30_Reserved_31_8_WIDTH 24
+#define D0F0x64_x30_Reserved_31_8_MASK 0xFFFFFF00
+
+/// D0F0x64_x30
+typedef union {
+ struct { ///<
+ UINT32 DevFnMap:8; ///<
+ UINT32 Reserved_31_8:24; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x64_x30_STRUCT;
+
+// **** D0F0x64_x46 Register Definition ****
+// Address
+#define D0F0x64_x46_ADDRESS 0x46
+// Type
+#define D0F0x64_x46_TYPE TYPE_D0F0x64
+
+
+// **** D0F0x94 Register Definition ****
+// Address
+#define D0F0x94_ADDRESS 0x94
+
+// Type
+#define D0F0x94_TYPE TYPE_D0F0
+// Field Data
+#define D0F0x94_OrbIndAddr_OFFSET 0
+#define D0F0x94_OrbIndAddr_WIDTH 7
+#define D0F0x94_OrbIndAddr_MASK 0x7f
+#define D0F0x94_Reserved_7_7_OFFSET 7
+#define D0F0x94_Reserved_7_7_WIDTH 1
+#define D0F0x94_Reserved_7_7_MASK 0x80
+#define D0F0x94_Reserved_31_9_OFFSET 9
+#define D0F0x94_Reserved_31_9_WIDTH 23
+#define D0F0x94_Reserved_31_9_MASK 0xfffffe00
+
+/// D0F0x94
+typedef union {
+ struct { ///<
+ UINT32 OrbIndAddr:7 ; ///<
+ UINT32 Reserved_7_7:1 ; ///<
+ UINT32 Reserved_8_8:1 ; ///<
+ UINT32 Reserved_31_9:23; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0x94_STRUCT;
+
+// **** D0F0x98_x07 Register Definition ****
+// Address
+#define D0F0x98_x07_ADDRESS 0x7
+// Type
+#define D0F0x98_x07_TYPE TYPE_D0F0x98
+
+// Field Data
+#define D0F0x98_x07_IocBwOptEn_OFFSET 0
+#define D0F0x98_x07_IocBwOptEn_WIDTH 1
+#define D0F0x98_x07_IocBwOptEn_MASK 0x1
+#define D0F0x98_x07_IocWrROMapDis_OFFSET 1
+#define D0F0x98_x07_IocWrROMapDis_WIDTH 1
+#define D0F0x98_x07_IocWrROMapDis_MASK 0x2
+#define D0F0x98_x07_IocRdROMapDis_OFFSET 2
+#define D0F0x98_x07_IocRdROMapDis_WIDTH 1
+#define D0F0x98_x07_IocRdROMapDis_MASK 0x4
+#define D0F0x98_x07_Reserved_3_3_OFFSET 3
+#define D0F0x98_x07_Reserved_3_3_WIDTH 1
+#define D0F0x98_x07_Reserved_3_3_MASK 0x8
+#define D0F0x98_x07_IommuBwOptEn_OFFSET 4
+#define D0F0x98_x07_IommuBwOptEn_WIDTH 1
+#define D0F0x98_x07_IommuBwOptEn_MASK 0x10
+#define D0F0x98_x07_Reserved_5_5_OFFSET 5
+#define D0F0x98_x07_Reserved_5_5_WIDTH 1
+#define D0F0x98_x07_Reserved_5_5_MASK 0x20
+#define D0F0x98_x07_DmaReqRespPassPWMode_OFFSET 6
+#define D0F0x98_x07_DmaReqRespPassPWMode_WIDTH 1
+#define D0F0x98_x07_DmaReqRespPassPWMode_MASK 0x40
+#define D0F0x98_x07_IommuIsocPassPWMode_OFFSET 7
+#define D0F0x98_x07_IommuIsocPassPWMode_WIDTH 1
+#define D0F0x98_x07_IommuIsocPassPWMode_MASK 0x80
+#define D0F0x98_x07_Reserved_14_8_OFFSET 8
+#define D0F0x98_x07_Reserved_14_8_WIDTH 7
+#define D0F0x98_x07_Reserved_14_8_MASK 0x7F00
+#define D0F0x98_x07_DropZeroMaskWrEn_OFFSET 15
+#define D0F0x98_x07_DropZeroMaskWrEn_WIDTH 1
+#define D0F0x98_x07_DropZeroMaskWrEn_MASK 0x8000
+#define D0F0x98_x07_SyncFloodOnParityErr_OFFSET 16
+#define D0F0x98_x07_SyncFloodOnParityErr_WIDTH 1
+#define D0F0x98_x07_SyncFloodOnParityErr_MASK 0x10000
+#define D0F0x98_x07_Reserved_30_17_OFFSET 17
+#define D0F0x98_x07_Reserved_30_17_WIDTH 14
+#define D0F0x98_x07_Reserved_30_17_MASK 0x7FFE0000
+#define D0F0x98_x07_SMUCsrIsocEn_OFFSET 31
+#define D0F0x98_x07_SMUCsrIsocEn_WIDTH 1
+#define D0F0x98_x07_SMUCsrIsocEn_MASK 0x80000000
+
+/// D0F0x98_x07
+typedef union {
+ struct { ///<
+ UINT32 IocBwOptEn:1; ///<
+ UINT32 IocWrROMapDis:1; ///<
+ UINT32 IocRdROMapDis:1; ///<
+ UINT32 Reserved_3_3:1; ///<
+ UINT32 IommuBwOptEn:1; ///<
+ UINT32 Reserved_5_5:1; ///<
+ UINT32 DmaReqRespPassPWMode:1; ///<
+ UINT32 IommuIsocPassPWMode:1; ///<
+ UINT32 Reserved_14_8:7; ///<
+ UINT32 DropZeroMaskWrEn:1; ///<
+ UINT32 SyncFloodOnParityErr:1; ///<
+ UINT32 Reserved_30_17:14; ///<
+ UINT32 SMUCsrIsocEn:1; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x98_x07_STRUCT;
+
+// **** D0F0x98_x08 Register Definition ****
+// Address
+#define D0F0x98_x08_ADDRESS 0x8
+// Type
+#define D0F0x98_x08_TYPE TYPE_D0F0x98
+
+// Field Data
+#define D0F0x98_x08_NpWrrLenA_OFFSET 0
+#define D0F0x98_x08_NpWrrLenA_WIDTH 8
+#define D0F0x98_x08_NpWrrLenA_MASK 0xFF
+#define D0F0x98_x08_NpWrrLenB_OFFSET 8
+#define D0F0x98_x08_NpWrrLenB_WIDTH 8
+#define D0F0x98_x08_NpWrrLenB_MASK 0xFF00
+#define D0F0x98_x08_NpWrrLenC_OFFSET 16
+#define D0F0x98_x08_NpWrrLenC_WIDTH 8
+#define D0F0x98_x08_NpWrrLenC_MASK 0xFF0000
+#define D0F0x98_x08_Reserved_31_24_OFFSET 24
+#define D0F0x98_x08_Reserved_31_24_WIDTH 8
+#define D0F0x98_x08_Reserved_31_24_MASK 0xFF000000
+
+/// D0F0x98_x08
+typedef union {
+ struct { ///<
+ UINT32 NpWrrLenA:8; ///<
+ UINT32 NpWrrLenB:8; ///<
+ UINT32 NpWrrLenC:8; ///<
+ UINT32 Reserved_31_24:8; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x98_x08_STRUCT;
+
+// **** D0F0x98_x0C Register Definition ****
+// Address
+#define D0F0x98_x0C_ADDRESS 0xC
+// Type
+#define D0F0x98_x0C_TYPE TYPE_D0F0x98
+
+// Field Data
+#define D0F0x98_x0C_GcmWrrLenA_OFFSET 0
+#define D0F0x98_x0C_GcmWrrLenA_WIDTH 8
+#define D0F0x98_x0C_GcmWrrLenA_MASK 0xFF
+#define D0F0x98_x0C_GcmWrrLenB_OFFSET 8
+#define D0F0x98_x0C_GcmWrrLenB_WIDTH 8
+#define D0F0x98_x0C_GcmWrrLenB_MASK 0xFF00
+#define D0F0x98_x0C_Reserved_29_16_OFFSET 16
+#define D0F0x98_x0C_Reserved_29_16_WIDTH 14
+#define D0F0x98_x0C_Reserved_29_16_MASK 0x3FFF0000
+#define D0F0x98_x0C_Reserved_31_31_OFFSET 31
+#define D0F0x98_x0C_Reserved_31_31_WIDTH 1
+#define D0F0x98_x0C_Reserved_31_31_MASK 0x80000000
+
+/// D0F0x98_x0C
+typedef union {
+ struct { ///<
+ UINT32 GcmWrrLenA:8; ///<
+ UINT32 GcmWrrLenB:8; ///<
+ UINT32 Reserved_29_16:14; ///<
+ UINT32 Reserved_30_30:1; ///<
+ UINT32 Reserved_31_31:1; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x98_x0C_STRUCT;
+
+// **** D0F0x98_x1E Register Definition ****
+// Address
+#define D0F0x98_x1E_ADDRESS 0x1E
+// Type
+#define D0F0x98_x1E_TYPE TYPE_D0F0x98
+
+// Field Data
+#define D0F0x98_x1E_Reserved_0_0_OFFSET 0
+#define D0F0x98_x1E_Reserved_0_0_WIDTH 1
+#define D0F0x98_x1E_Reserved_0_0_MASK 0x1
+#define D0F0x98_x1E_HiPriEn_OFFSET 1
+#define D0F0x98_x1E_HiPriEn_WIDTH 1
+#define D0F0x98_x1E_HiPriEn_MASK 0x2
+#define D0F0x98_x1E_Reserved_23_2_OFFSET 2
+#define D0F0x98_x1E_Reserved_23_2_WIDTH 22
+#define D0F0x98_x1E_Reserved_23_2_MASK 0xFFFFFC
+#define D0F0x98_x1E_RxErrStatusDelay_OFFSET 24
+#define D0F0x98_x1E_RxErrStatusDelay_WIDTH 8
+#define D0F0x98_x1E_RxErrStatusDelay_MASK 0xFF000000
+
+/// D0F0x98_x1E
+typedef union {
+ struct { ///<
+ UINT32 Reserved_0_0:1; ///<
+ UINT32 HiPriEn:1; ///<
+ UINT32 Reserved_23_2:22; ///<
+ UINT32 RxErrStatusDelay:8; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x98_x1E_STRUCT;
+
+// **** D0F0x98_x28 Register Definition ****
+// Address
+#define D0F0x98_x28_ADDRESS 0x28
+// Type
+#define D0F0x98_x28_TYPE TYPE_D0F0x98
+
+// Field Data
+#define D0F0x98_x28_Reserved_0_0_OFFSET 0
+#define D0F0x98_x28_Reserved_0_0_WIDTH 1
+#define D0F0x98_x28_Reserved_0_0_MASK 0x1
+#define D0F0x98_x28_ForceCoherentIntr_OFFSET 1
+#define D0F0x98_x28_ForceCoherentIntr_WIDTH 1
+#define D0F0x98_x28_ForceCoherentIntr_MASK 0x2
+#define D0F0x98_x28_Reserved_31_2_OFFSET 2
+#define D0F0x98_x28_Reserved_31_2_WIDTH 30
+#define D0F0x98_x28_Reserved_31_2_MASK 0xFFFFFFFC
+
+/// D0F0x98_x28
+typedef union {
+ struct { ///<
+ UINT32 Reserved_0_0:1; ///<
+ UINT32 ForceCoherentIntr:1; ///<
+ UINT32 Reserved_31_2:30; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x98_x28_STRUCT;
+
+// **** D0F0x98_x2C Register Definition ****
+// Address
+#define D0F0x98_x2C_ADDRESS 0x2C
+// Type
+#define D0F0x98_x2C_TYPE TYPE_D0F0x98
+
+// Field Data
+#define D0F0x98_x2C_Reserved_0_0_OFFSET 0
+#define D0F0x98_x2C_Reserved_0_0_WIDTH 1
+#define D0F0x98_x2C_Reserved_0_0_MASK 0x1
+#define D0F0x98_x2C_DynWakeEn_OFFSET 1
+#define D0F0x98_x2C_DynWakeEn_WIDTH 1
+#define D0F0x98_x2C_DynWakeEn_MASK 0x2
+#define D0F0x98_x2C_CgttLclkOverride_OFFSET 2
+#define D0F0x98_x2C_CgttLclkOverride_WIDTH 1
+#define D0F0x98_x2C_CgttLclkOverride_MASK 0x4
+#define D0F0x98_x2C_Reserved_8_3_OFFSET 3
+#define D0F0x98_x2C_Reserved_8_3_WIDTH 6
+#define D0F0x98_x2C_Reserved_8_3_MASK 0x1F8
+#define D0F0x98_x2C_SBDmaActiveMask_OFFSET 9
+#define D0F0x98_x2C_SBDmaActiveMask_WIDTH 1
+#define D0F0x98_x2C_SBDmaActiveMask_MASK 0x200
+#define D0F0x98_x2C_Reserved_15_10_OFFSET 10
+#define D0F0x98_x2C_Reserved_15_10_WIDTH 6
+#define D0F0x98_x2C_Reserved_15_10_MASK 0xFC00
+#define D0F0x98_x2C_WakeHysteresis_OFFSET 16
+#define D0F0x98_x2C_WakeHysteresis_WIDTH 16
+#define D0F0x98_x2C_WakeHysteresis_MASK 0xFFFF0000
+
+/// D0F0x98_x2C
+typedef union {
+ struct { ///<
+ UINT32 Reserved_0_0:1; ///<
+ UINT32 DynWakeEn:1; ///<
+ UINT32 CgttLclkOverride:1; ///<
+ UINT32 Reserved_8_3:6; ///<
+ UINT32 SBDmaActiveMask:1; ///<
+ UINT32 Reserved_15_10:6; ///<
+ UINT32 WakeHysteresis:16; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x98_x2C_STRUCT;
+
+// **** D0F0x98_x3A Register Definition ****
+// Address
+#define D0F0x98_x3A_ADDRESS 0x3A
+// Type
+#define D0F0x98_x3A_TYPE TYPE_D0F0x98
+
+// **** D0F0x98_x49 Register Definition ****
+// Address
+#define D0F0x98_x49_ADDRESS 0x49
+// Type
+#define D0F0x98_x49_TYPE TYPE_D0F0x98
+
+// Field Data
+#define D0F0x98_x49_Reserved_23_0_OFFSET 0
+#define D0F0x98_x49_Reserved_23_0_WIDTH 24
+#define D0F0x98_x49_Reserved_23_0_MASK 0xFFFFFF
+#define D0F0x98_x49_SoftOverrideClk6_OFFSET 24
+#define D0F0x98_x49_SoftOverrideClk6_WIDTH 1
+#define D0F0x98_x49_SoftOverrideClk6_MASK 0x1000000
+#define D0F0x98_x49_SoftOverrideClk5_OFFSET 25
+#define D0F0x98_x49_SoftOverrideClk5_WIDTH 1
+#define D0F0x98_x49_SoftOverrideClk5_MASK 0x2000000
+#define D0F0x98_x49_SoftOverrideClk4_OFFSET 26
+#define D0F0x98_x49_SoftOverrideClk4_WIDTH 1
+#define D0F0x98_x49_SoftOverrideClk4_MASK 0x4000000
+#define D0F0x98_x49_SoftOverrideClk3_OFFSET 27
+#define D0F0x98_x49_SoftOverrideClk3_WIDTH 1
+#define D0F0x98_x49_SoftOverrideClk3_MASK 0x8000000
+#define D0F0x98_x49_SoftOverrideClk2_OFFSET 28
+#define D0F0x98_x49_SoftOverrideClk2_WIDTH 1
+#define D0F0x98_x49_SoftOverrideClk2_MASK 0x10000000
+#define D0F0x98_x49_SoftOverrideClk1_OFFSET 29
+#define D0F0x98_x49_SoftOverrideClk1_WIDTH 1
+#define D0F0x98_x49_SoftOverrideClk1_MASK 0x20000000
+#define D0F0x98_x49_SoftOverrideClk0_OFFSET 30
+#define D0F0x98_x49_SoftOverrideClk0_WIDTH 1
+#define D0F0x98_x49_SoftOverrideClk0_MASK 0x40000000
+#define D0F0x98_x49_Reserved_31_31_OFFSET 31
+#define D0F0x98_x49_Reserved_31_31_WIDTH 1
+#define D0F0x98_x49_Reserved_31_31_MASK 0x80000000
+
+/// D0F0x98_x49
+typedef union {
+ struct { ///<
+ UINT32 Reserved_23_0:24; ///<
+ UINT32 SoftOverrideClk6:1; ///<
+ UINT32 SoftOverrideClk5:1; ///<
+ UINT32 SoftOverrideClk4:1; ///<
+ UINT32 SoftOverrideClk3:1; ///<
+ UINT32 SoftOverrideClk2:1; ///<
+ UINT32 SoftOverrideClk1:1; ///<
+ UINT32 SoftOverrideClk0:1; ///<
+ UINT32 Reserved_31_31:1; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x98_x49_STRUCT;
+
+// **** D0F0x98_x4A Register Definition ****
+// Address
+#define D0F0x98_x4A_ADDRESS 0x4A
+// Type
+#define D0F0x98_x4A_TYPE TYPE_D0F0x98
+
+// Field Data
+#define D0F0x98_x4A_Reserved_23_0_OFFSET 0
+#define D0F0x98_x4A_Reserved_23_0_WIDTH 24
+#define D0F0x98_x4A_Reserved_23_0_MASK 0xFFFFFF
+#define D0F0x98_x4A_SoftOverrideClk6_OFFSET 24
+#define D0F0x98_x4A_SoftOverrideClk6_WIDTH 1
+#define D0F0x98_x4A_SoftOverrideClk6_MASK 0x1000000
+#define D0F0x98_x4A_SoftOverrideClk5_OFFSET 25
+#define D0F0x98_x4A_SoftOverrideClk5_WIDTH 1
+#define D0F0x98_x4A_SoftOverrideClk5_MASK 0x2000000
+#define D0F0x98_x4A_SoftOverrideClk4_OFFSET 26
+#define D0F0x98_x4A_SoftOverrideClk4_WIDTH 1
+#define D0F0x98_x4A_SoftOverrideClk4_MASK 0x4000000
+#define D0F0x98_x4A_SoftOverrideClk3_OFFSET 27
+#define D0F0x98_x4A_SoftOverrideClk3_WIDTH 1
+#define D0F0x98_x4A_SoftOverrideClk3_MASK 0x8000000
+#define D0F0x98_x4A_SoftOverrideClk2_OFFSET 28
+#define D0F0x98_x4A_SoftOverrideClk2_WIDTH 1
+#define D0F0x98_x4A_SoftOverrideClk2_MASK 0x10000000
+#define D0F0x98_x4A_SoftOverrideClk1_OFFSET 29
+#define D0F0x98_x4A_SoftOverrideClk1_WIDTH 1
+#define D0F0x98_x4A_SoftOverrideClk1_MASK 0x20000000
+#define D0F0x98_x4A_SoftOverrideClk0_OFFSET 30
+#define D0F0x98_x4A_SoftOverrideClk0_WIDTH 1
+#define D0F0x98_x4A_SoftOverrideClk0_MASK 0x40000000
+#define D0F0x98_x4A_Reserved_31_31_OFFSET 31
+#define D0F0x98_x4A_Reserved_31_31_WIDTH 1
+#define D0F0x98_x4A_Reserved_31_31_MASK 0x80000000
+
+/// D0F0x98_x4A
+typedef union {
+ struct { ///<
+ UINT32 Reserved_23_0:24; ///<
+ UINT32 SoftOverrideClk6:1; ///<
+ UINT32 SoftOverrideClk5:1; ///<
+ UINT32 SoftOverrideClk4:1; ///<
+ UINT32 SoftOverrideClk3:1; ///<
+ UINT32 SoftOverrideClk2:1; ///<
+ UINT32 SoftOverrideClk1:1; ///<
+ UINT32 SoftOverrideClk0:1; ///<
+ UINT32 Reserved_31_31:1; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0x98_x4A_STRUCT;
+
+
+
+
+
+
+
+
+
+
+
+/// D0F0xBC_x3FA04
+typedef union {
+ struct { ///<
+ UINT32 Bitfield_15_0:16; ///<
+ UINT32 Bitfield_31_16:16; ///<
+
+ } Field;
+
+ UINT32 Value;
+} GnbRegistersKB4753_STRUCT;
+
+// **** D0F0xE4_PHY_0004 Register Definition ****
+// Address
+#define D0F0xE4_PHY_0004_ADDRESS 0x0004
+// Type
+#define D0F0xE4_PHY_0004_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_PHY_0004_Reserved_15_0_OFFSET 0
+#define D0F0xE4_PHY_0004_Reserved_15_0_WIDTH 16
+#define D0F0xE4_PHY_0004_Reserved_15_0_MASK 0xFFFF
+#define D0F0xE4_PHY_0004_CfgIdleDetTh_OFFSET 16
+#define D0F0xE4_PHY_0004_CfgIdleDetTh_WIDTH 2
+#define D0F0xE4_PHY_0004_CfgIdleDetTh_MASK 0x30000
+#define D0F0xE4_PHY_0004_Reserved_31_18_OFFSET 18
+#define D0F0xE4_PHY_0004_Reserved_31_18_WIDTH 14
+#define D0F0xE4_PHY_0004_Reserved_31_18_MASK 0xFFFC0000
+
+/// D0F0xE4_PHY_0004
+typedef union {
+ struct { ///<
+ UINT32 Reserved_15_0:16; ///<
+ UINT32 CfgIdleDetTh:2 ; ///<
+ UINT32 Reserved_31_18:14; ///<
+ } Field;
+ UINT32 Value;
+} D0F0xE4_PHY_0004_STRUCT;
+
+// **** D0F0xE4_PHY_4440 Register Definition ****
+// Address
+#define D0F0xE4_PHY_4440_ADDRESS 0x4440
+// Type
+#define D0F0xE4_PHY_4440_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_PHY_4440_Reserved_12_0_OFFSET 0
+#define D0F0xE4_PHY_4440_Reserved_12_0_WIDTH 13
+#define D0F0xE4_PHY_4440_Reserved_12_0_MASK 0x1FFF
+#define D0F0xE4_PHY_4440_PllDbgRoIPFDResetCntrl_OFFSET 13
+#define D0F0xE4_PHY_4440_PllDbgRoIPFDResetCntrl_WIDTH 2
+#define D0F0xE4_PHY_4440_PllDbgRoIPFDResetCntrl_MASK 0x6000
+#define D0F0xE4_PHY_4440_Reserved_31_15_OFFSET 15
+#define D0F0xE4_PHY_4440_Reserved_31_15_WIDTH 17
+#define D0F0xE4_PHY_4440_Reserved_31_15_MASK 0xFFFF1000
+
+/// D0F0xE4_PHY_4440
+typedef union {
+ struct { ///<
+ UINT32 Reserved_12_0:13; ///<
+ UINT32 PllDbgRoIPFDResetCntrl:2 ; ///<
+ UINT32 Reserved_31_15:17; ///<
+ } Field;
+ UINT32 Value;
+} D0F0xE4_PHY_4440_STRUCT;
+
+// **** D0F0xE4_PHY_4450 Register Definition ****
+// Address
+#define D0F0xE4_PHY_4450_ADDRESS 0x4450
+// Type
+#define D0F0xE4_PHY_4450_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_PHY_4450_PllCfgROBWCntrlOvrdVal0_OFFSET 0
+#define D0F0xE4_PHY_4450_PllCfgROBWCntrlOvrdVal0_WIDTH 8
+#define D0F0xE4_PHY_4450_PllCfgROBWCntrlOvrdVal0_MASK 0xFF
+#define D0F0xE4_PHY_4450_Reserved_29_8_OFFSET 8
+#define D0F0xE4_PHY_4450_Reserved_29_8_WIDTH 22
+#define D0F0xE4_PHY_4450_Reserved_29_8_MASK 0x3FFFFF00
+#define D0F0xE4_PHY_4450_PllCfgROVTOIBiasCntrlOvrdVal0_OFFSET 30
+#define D0F0xE4_PHY_4450_PllCfgROVTOIBiasCntrlOvrdVal0_WIDTH 1
+#define D0F0xE4_PHY_4450_PllCfgROVTOIBiasCntrlOvrdVal0_MASK 0x40000000
+#define D0F0xE4_PHY_4450_Reserved_31_31_OFFSET 31
+#define D0F0xE4_PHY_4450_Reserved_31_31_WIDTH 1
+#define D0F0xE4_PHY_4450_Reserved_31_31_MASK 0x80000000
+
+/// D0F0xE4_PHY_4450
+typedef union {
+ struct { ///<
+ UINT32 PllCfgROBWCntrlOvrdVal0:8 ; ///<
+ UINT32 Reserved_29_8:22; ///<
+ UINT32 PllCfgROVTOIBiasCntrlOvrdVal0:1 ; ///<
+ UINT32 Reserved_31_31:1 ; ///<
+ } Field;
+ UINT32 Value;
+} D0F0xE4_PHY_4450_STRUCT;
+
+// **** D0F0xE4_WRAP_0800 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_0800_ADDRESS 0x800
+// Type
+#define D0F0xE4_WRAP_0800_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_WRAP_0800_HoldTraining_OFFSET 0
+#define D0F0xE4_WRAP_0800_HoldTraining_WIDTH 1
+#define D0F0xE4_WRAP_0800_HoldTraining_MASK 0x1
+#define D0F0xE4_WRAP_0800_Reserved_31_1_OFFSET 1
+#define D0F0xE4_WRAP_0800_Reserved_31_1_WIDTH 31
+#define D0F0xE4_WRAP_0800_Reserved_31_1_MASK 0xFFFFFFFE
+
+/// D0F0xE4_WRAP_0800
+typedef union {
+ struct { ///<
+ UINT32 HoldTraining:1; ///<
+ UINT32 Reserved_31_1:31; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_WRAP_0800_STRUCT;
+
+typedef union {
+ struct { ///<
+ UINT32 Reserved_23_0:24; ///<
+ UINT32 bit_31_24;
+
+ } Field;
+
+ UINT32 Value;
+} GnbRegistersKB4915_STRUCT;
+
+typedef union {
+ struct { ///<
+ UINT32 Reserved_23_0:24; ///<
+ UINT32 bit_31_24:8; ///<
+
+ } Field;
+
+ UINT32 Value;
+} GnbRegistersKB4940_STRUCT;
+
+typedef union {
+ struct { ///<
+ UINT32 Reserved_23_0:24; ///<
+ UINT32 bit_31_24:8; ///<
+
+ } Field;
+
+ UINT32 Value;
+} GnbRegistersKB4965_STRUCT;
+
+typedef union {
+ struct { ///<
+ UINT32 Reserved_23_0:24; ///<
+ UINT32 bit_31_24:8; ///<
+
+ } Field;
+
+ UINT32 Value;
+} GnbRegistersKB4990_STRUCT;
+
+typedef union {
+ struct { ///<
+ UINT32 Reserved_23_0:24; ///<
+ UINT32 bit_31_24:8; ///<
+
+ } Field;
+
+ UINT32 Value;
+} GnbRegistersKB5015_STRUCT;
+
+// **** D0F0xE4_WRAP_8011 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8011_ADDRESS 0x8011
+// Type
+#define D0F0xE4_WRAP_8011_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_WRAP_8011_TxclkDynGateLatency_OFFSET 0
+#define D0F0xE4_WRAP_8011_TxclkDynGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8011_TxclkDynGateLatency_MASK 0x3F
+#define D0F0xE4_WRAP_8011_TxclkPermGateEven_OFFSET 6
+#define D0F0xE4_WRAP_8011_TxclkPermGateEven_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkPermGateEven_MASK 0x40
+#define D0F0xE4_WRAP_8011_TxclkDynGateEnable_OFFSET 7
+#define D0F0xE4_WRAP_8011_TxclkDynGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkDynGateEnable_MASK 0x80
+#define D0F0xE4_WRAP_8011_TxclkPermStop_OFFSET 8
+#define D0F0xE4_WRAP_8011_TxclkPermStop_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkPermStop_MASK 0x100
+#define D0F0xE4_WRAP_8011_TxclkRegsGateEnable_OFFSET 9
+#define D0F0xE4_WRAP_8011_TxclkRegsGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkRegsGateEnable_MASK 0x200
+#define D0F0xE4_WRAP_8011_TxclkRegsGateLatency_OFFSET 10
+#define D0F0xE4_WRAP_8011_TxclkRegsGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8011_TxclkRegsGateLatency_MASK 0xFC00
+#define D0F0xE4_WRAP_8011_Reserved_16_16_OFFSET 16
+#define D0F0xE4_WRAP_8011_Reserved_16_16_WIDTH 1
+#define D0F0xE4_WRAP_8011_Reserved_16_16_MASK 0x10000
+#define D0F0xE4_WRAP_8011_TxclkPermGateLatency_OFFSET 17
+#define D0F0xE4_WRAP_8011_TxclkPermGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8011_TxclkPermGateLatency_MASK 0x7E0000
+#define D0F0xE4_WRAP_8011_Bitfield_23_23_OFFSET 23
+#define D0F0xE4_WRAP_8011_Bitfield_23_23_WIDTH 1
+#define D0F0xE4_WRAP_8011_Bitfield_23_23_MASK 0x800000
+#define D0F0xE4_WRAP_8011_TxclkLcntGateEnable_OFFSET 24
+#define D0F0xE4_WRAP_8011_TxclkLcntGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8011_TxclkLcntGateEnable_MASK 0x1000000
+#define D0F0xE4_WRAP_8011_Reserved_25_25_OFFSET 25
+#define D0F0xE4_WRAP_8011_Reserved_25_25_WIDTH 1
+#define D0F0xE4_WRAP_8011_Reserved_25_25_MASK 0x2000000
+#define D0F0xE4_WRAP_8011_Reserved_31_26_OFFSET 26
+#define D0F0xE4_WRAP_8011_Reserved_31_26_WIDTH 6
+#define D0F0xE4_WRAP_8011_Reserved_31_26_MASK 0xFC000000
+
+/// D0F0xE4_WRAP_8011
+typedef union {
+ struct { ///<
+ UINT32 TxclkDynGateLatency:6; ///<
+ UINT32 TxclkPermGateEven:1; ///<
+ UINT32 TxclkDynGateEnable:1; ///<
+ UINT32 TxclkPermStop:1; ///<
+ UINT32 TxclkRegsGateEnable:1; ///<
+ UINT32 TxclkRegsGateLatency:6; ///<
+ UINT32 Reserved_16_16:1; ///<
+ UINT32 TxclkPermGateLatency:6; ///<
+ UINT32 Bitfield_23_23:1; ///<
+ UINT32 TxclkLcntGateEnable:1; ///<
+ UINT32 Reserved_25_25:1; ///<
+ UINT32 Reserved_31_26:6; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_WRAP_8011_STRUCT;
+
+// **** D0F0xE4_WRAP_8012 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8012_ADDRESS 0x8012
+// Type
+#define D0F0xE4_WRAP_8012_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_WRAP_8012_Pif1xIdleGateLatency_OFFSET 0
+#define D0F0xE4_WRAP_8012_Pif1xIdleGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8012_Pif1xIdleGateLatency_MASK 0x3F
+#define D0F0xE4_WRAP_8012_Reserved_6_6_OFFSET 6
+#define D0F0xE4_WRAP_8012_Reserved_6_6_WIDTH 1
+#define D0F0xE4_WRAP_8012_Reserved_6_6_MASK 0x40
+#define D0F0xE4_WRAP_8012_Pif1xIdleGateEnable_OFFSET 7
+#define D0F0xE4_WRAP_8012_Pif1xIdleGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8012_Pif1xIdleGateEnable_MASK 0x80
+#define D0F0xE4_WRAP_8012_Pif1xIdleResumeLatency_OFFSET 8
+#define D0F0xE4_WRAP_8012_Pif1xIdleResumeLatency_WIDTH 6
+#define D0F0xE4_WRAP_8012_Pif1xIdleResumeLatency_MASK 0x3F00
+#define D0F0xE4_WRAP_8012_Reserved_31_14_OFFSET 14
+#define D0F0xE4_WRAP_8012_Reserved_31_14_WIDTH 18
+#define D0F0xE4_WRAP_8012_Reserved_31_14_MASK 0xFFFFC000
+
+/// D0F0xE4_WRAP_8012
+typedef union {
+ struct { ///<
+ UINT32 Pif1xIdleGateLatency:6; ///<
+ UINT32 Reserved_6_6:1; ///<
+ UINT32 Pif1xIdleGateEnable:1; ///<
+ UINT32 Pif1xIdleResumeLatency:6; ///<
+ UINT32 Reserved_31_14:18; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_WRAP_8012_STRUCT;
+
+// **** D0F0xE4_WRAP_8013 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8013_ADDRESS 0x8013
+// Type
+#define D0F0xE4_WRAP_8013_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_WRAP_8013_MasterPciePllA_OFFSET 0
+#define D0F0xE4_WRAP_8013_MasterPciePllA_WIDTH 1
+#define D0F0xE4_WRAP_8013_MasterPciePllA_MASK 0x1
+#define D0F0xE4_WRAP_8013_MasterPciePllB_OFFSET 1
+#define D0F0xE4_WRAP_8013_MasterPciePllB_WIDTH 1
+#define D0F0xE4_WRAP_8013_MasterPciePllB_MASK 0x2
+#define D0F0xE4_WRAP_8013_Reserved_2_2_OFFSET 2
+#define D0F0xE4_WRAP_8013_Reserved_2_2_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_2_2_MASK 0x4
+#define D0F0xE4_WRAP_8013_Reserved_3_3_OFFSET 3
+#define D0F0xE4_WRAP_8013_Reserved_3_3_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_3_3_MASK 0x8
+#define D0F0xE4_WRAP_8013_ClkDividerResetOverrideA_OFFSET 4
+#define D0F0xE4_WRAP_8013_ClkDividerResetOverrideA_WIDTH 1
+#define D0F0xE4_WRAP_8013_ClkDividerResetOverrideA_MASK 0x10
+#define D0F0xE4_WRAP_8013_ClkDividerResetOverrideB_OFFSET 5
+#define D0F0xE4_WRAP_8013_ClkDividerResetOverrideB_WIDTH 1
+#define D0F0xE4_WRAP_8013_ClkDividerResetOverrideB_MASK 0x20
+#define D0F0xE4_WRAP_8013_Reserved_6_6_OFFSET 6
+#define D0F0xE4_WRAP_8013_Reserved_6_6_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_6_6_MASK 0x40
+#define D0F0xE4_WRAP_8013_Reserved_7_7_OFFSET 7
+#define D0F0xE4_WRAP_8013_Reserved_7_7_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_7_7_MASK 0x80
+#define D0F0xE4_WRAP_8013_TxclkSelCoreOverride_OFFSET 8
+#define D0F0xE4_WRAP_8013_TxclkSelCoreOverride_WIDTH 1
+#define D0F0xE4_WRAP_8013_TxclkSelCoreOverride_MASK 0x100
+#define D0F0xE4_WRAP_8013_TxclkSelPifAOverride_OFFSET 9
+#define D0F0xE4_WRAP_8013_TxclkSelPifAOverride_WIDTH 1
+#define D0F0xE4_WRAP_8013_TxclkSelPifAOverride_MASK 0x200
+#define D0F0xE4_WRAP_8013_TxclkSelPifBOverride_OFFSET 10
+#define D0F0xE4_WRAP_8013_TxclkSelPifBOverride_WIDTH 1
+#define D0F0xE4_WRAP_8013_TxclkSelPifBOverride_MASK 0x400
+#define D0F0xE4_WRAP_8013_Reserved_11_11_OFFSET 11
+#define D0F0xE4_WRAP_8013_Reserved_11_11_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_11_11_MASK 0x800
+#define D0F0xE4_WRAP_8013_Reserved_12_12_OFFSET 12
+#define D0F0xE4_WRAP_8013_Reserved_12_12_WIDTH 1
+#define D0F0xE4_WRAP_8013_Reserved_12_12_MASK 0x1000
+#define D0F0xE4_WRAP_8013_PhyRxIsoDis_OFFSET 13
+#define D0F0xE4_WRAP_8013_PhyRxIsoDis_WIDTH 2
+#define D0F0xE4_WRAP_8013_PhyRxIsoDis_MASK 0x6000
+#define D0F0xE4_WRAP_8013_Reserved_31_15_OFFSET 15
+#define D0F0xE4_WRAP_8013_Reserved_31_15_WIDTH 17
+#define D0F0xE4_WRAP_8013_Reserved_31_15_MASK 0xFFFF8000
+
+/// D0F0xE4_WRAP_8013
+typedef union {
+ struct { ///<
+ UINT32 MasterPciePllA:1; ///<
+ UINT32 MasterPciePllB:1; ///<
+ UINT32 Reserved_2_2:1; ///<
+ UINT32 Reserved_3_3:1; ///<
+ UINT32 ClkDividerResetOverrideA:1; ///<
+ UINT32 ClkDividerResetOverrideB:1; ///<
+ UINT32 Reserved_6_6:1; ///<
+ UINT32 Reserved_7_7:1; ///<
+ UINT32 TxclkSelCoreOverride:1; ///<
+ UINT32 TxclkSelPifAOverride:1; ///<
+ UINT32 TxclkSelPifBOverride:1; ///<
+ UINT32 Reserved_11_11:1; ///<
+ UINT32 Reserved_12_12:1; ///<
+ UINT32 PhyRxIsoDis:2; ///<
+ UINT32 Reserved_31_15:17; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_WRAP_8013_STRUCT;
+
+// **** D0F0xE4_WRAP_8014 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8014_ADDRESS 0x8014
+// Type
+#define D0F0xE4_WRAP_8014_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_WRAP_8014_TxclkPermGateEnable_OFFSET 0
+#define D0F0xE4_WRAP_8014_TxclkPermGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_TxclkPermGateEnable_MASK 0x1
+#define D0F0xE4_WRAP_8014_TxclkPrbsGateEnable_OFFSET 1
+#define D0F0xE4_WRAP_8014_TxclkPrbsGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_TxclkPrbsGateEnable_MASK 0x2
+#define D0F0xE4_WRAP_8014_Reserved_2_2_OFFSET 2
+#define D0F0xE4_WRAP_8014_Reserved_2_2_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_2_2_MASK 0x4
+#define D0F0xE4_WRAP_8014_Reserved_3_3_OFFSET 3
+#define D0F0xE4_WRAP_8014_Reserved_3_3_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_3_3_MASK 0x8
+#define D0F0xE4_WRAP_8014_Reserved_4_4_OFFSET 4
+#define D0F0xE4_WRAP_8014_Reserved_4_4_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_4_4_MASK 0x10
+#define D0F0xE4_WRAP_8014_Reserved_5_5_OFFSET 5
+#define D0F0xE4_WRAP_8014_Reserved_5_5_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_5_5_MASK 0x20
+#define D0F0xE4_WRAP_8014_Reserved_11_6_OFFSET 6
+#define D0F0xE4_WRAP_8014_Reserved_11_6_WIDTH 6
+#define D0F0xE4_WRAP_8014_Reserved_11_6_MASK 0xFC0
+#define D0F0xE4_WRAP_8014_PcieGatePifA1xEnable_OFFSET 12
+#define D0F0xE4_WRAP_8014_PcieGatePifA1xEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_PcieGatePifA1xEnable_MASK 0x1000
+#define D0F0xE4_WRAP_8014_PcieGatePifB1xEnable_OFFSET 13
+#define D0F0xE4_WRAP_8014_PcieGatePifB1xEnable_WIDTH 1
+#define D0F0xE4_WRAP_8014_PcieGatePifB1xEnable_MASK 0x2000
+#define D0F0xE4_WRAP_8014_Reserved_14_14_OFFSET 14
+#define D0F0xE4_WRAP_8014_Reserved_14_14_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_14_14_MASK 0x4000
+#define D0F0xE4_WRAP_8014_Reserved_15_15_OFFSET 15
+#define D0F0xE4_WRAP_8014_Reserved_15_15_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_15_15_MASK 0x8000
+#define D0F0xE4_WRAP_8014_Reserved_19_16_OFFSET 16
+#define D0F0xE4_WRAP_8014_Reserved_19_16_WIDTH 4
+#define D0F0xE4_WRAP_8014_Reserved_19_16_MASK 0xF0000
+#define D0F0xE4_WRAP_8014_TxclkPermGateOnlyWhenPllPwrDn_OFFSET 20
+#define D0F0xE4_WRAP_8014_TxclkPermGateOnlyWhenPllPwrDn_WIDTH 1
+#define D0F0xE4_WRAP_8014_TxclkPermGateOnlyWhenPllPwrDn_MASK 0x100000
+#define D0F0xE4_WRAP_8014_Reserved_23_21_OFFSET 21
+#define D0F0xE4_WRAP_8014_Reserved_23_21_WIDTH 3
+#define D0F0xE4_WRAP_8014_Reserved_23_21_MASK 0xE00000
+#define D0F0xE4_WRAP_8014_Reserved_24_24_OFFSET 24
+#define D0F0xE4_WRAP_8014_Reserved_24_24_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_24_24_MASK 0x1000000
+#define D0F0xE4_WRAP_8014_Reserved_25_25_OFFSET 25
+#define D0F0xE4_WRAP_8014_Reserved_25_25_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_25_25_MASK 0x2000000
+#define D0F0xE4_WRAP_8014_Reserved_26_26_OFFSET 26
+#define D0F0xE4_WRAP_8014_Reserved_26_26_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_26_26_MASK 0x4000000
+#define D0F0xE4_WRAP_8014_Reserved_27_27_OFFSET 27
+#define D0F0xE4_WRAP_8014_Reserved_27_27_WIDTH 1
+#define D0F0xE4_WRAP_8014_Reserved_27_27_MASK 0x8000000
+#define D0F0xE4_WRAP_8014_SpareRegRw_OFFSET 28
+#define D0F0xE4_WRAP_8014_SpareRegRw_WIDTH 4
+#define D0F0xE4_WRAP_8014_SpareRegRw_MASK 0xF0000000
+
+/// D0F0xE4_WRAP_8014
+typedef union {
+ struct { ///<
+ UINT32 TxclkPermGateEnable:1; ///<
+ UINT32 TxclkPrbsGateEnable:1; ///<
+ UINT32 Reserved_2_2:1; ///<
+ UINT32 Reserved_3_3:1; ///<
+ UINT32 Reserved_4_4:1; ///<
+ UINT32 Reserved_5_5:1; ///<
+ UINT32 Reserved_11_6:6; ///<
+ UINT32 PcieGatePifA1xEnable:1; ///<
+ UINT32 PcieGatePifB1xEnable:1; ///<
+ UINT32 Reserved_14_14:1; ///<
+ UINT32 Reserved_15_15:1; ///<
+ UINT32 Reserved_19_16:4; ///<
+ UINT32 TxclkPermGateOnlyWhenPllPwrDn:1; ///<
+ UINT32 Reserved_23_21:3; ///<
+ UINT32 Reserved_24_24:1; ///<
+ UINT32 Reserved_25_25:1; ///<
+ UINT32 Reserved_26_26:1; ///<
+ UINT32 Reserved_27_27:1; ///<
+ UINT32 SpareRegRw:4; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_WRAP_8014_STRUCT;
+
+// **** D0F0xE4_WRAP_8015 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8015_ADDRESS 0x8015
+// Type
+#define D0F0xE4_WRAP_8015_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_WRAP_8015_Bitfield_0_0_OFFSET 0
+#define D0F0xE4_WRAP_8015_Bitfield_0_0_WIDTH 1
+#define D0F0xE4_WRAP_8015_Bitfield_0_0_MASK 0x1
+#define D0F0xE4_WRAP_8015_Reserved_1_1_OFFSET 1
+#define D0F0xE4_WRAP_8015_Reserved_1_1_WIDTH 1
+#define D0F0xE4_WRAP_8015_Reserved_1_1_MASK 0x2
+#define D0F0xE4_WRAP_8015_Reserved_7_2_OFFSET 2
+#define D0F0xE4_WRAP_8015_Reserved_7_2_WIDTH 6
+#define D0F0xE4_WRAP_8015_Reserved_7_2_MASK 0xFC
+#define D0F0xE4_WRAP_8015_Reserved_8_8_OFFSET 8
+#define D0F0xE4_WRAP_8015_Reserved_8_8_WIDTH 1
+#define D0F0xE4_WRAP_8015_Reserved_8_8_MASK 0x100
+#define D0F0xE4_WRAP_8015_Bitfield_9_9_OFFSET 9
+#define D0F0xE4_WRAP_8015_Bitfield_9_9_WIDTH 1
+#define D0F0xE4_WRAP_8015_Bitfield_9_9_MASK 0x200
+#define D0F0xE4_WRAP_8015_Bitfield_10_10_OFFSET 10
+#define D0F0xE4_WRAP_8015_Bitfield_10_10_WIDTH 1
+#define D0F0xE4_WRAP_8015_Bitfield_10_10_MASK 0x400
+#define D0F0xE4_WRAP_8015_Bitfield_11_11_OFFSET 11
+#define D0F0xE4_WRAP_8015_Bitfield_11_11_WIDTH 1
+#define D0F0xE4_WRAP_8015_Bitfield_11_11_MASK 0x800
+#define D0F0xE4_WRAP_8015_Reserved_13_12_OFFSET 12
+#define D0F0xE4_WRAP_8015_Reserved_13_12_WIDTH 2
+#define D0F0xE4_WRAP_8015_Reserved_13_12_MASK 0x3000
+#define D0F0xE4_WRAP_8015_Bitfield_15_14_OFFSET 14
+#define D0F0xE4_WRAP_8015_Bitfield_15_14_WIDTH 2
+#define D0F0xE4_WRAP_8015_Bitfield_15_14_MASK 0xC000
+#define D0F0xE4_WRAP_8015_RefclkRegsGateLatency_OFFSET 16
+#define D0F0xE4_WRAP_8015_RefclkRegsGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8015_RefclkRegsGateLatency_MASK 0x3F0000
+#define D0F0xE4_WRAP_8015_Reserved_22_22_OFFSET 22
+#define D0F0xE4_WRAP_8015_Reserved_22_22_WIDTH 1
+#define D0F0xE4_WRAP_8015_Reserved_22_22_MASK 0x400000
+#define D0F0xE4_WRAP_8015_RefclkRegsGateEnable_OFFSET 23
+#define D0F0xE4_WRAP_8015_RefclkRegsGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8015_RefclkRegsGateEnable_MASK 0x800000
+#define D0F0xE4_WRAP_8015_Reserved_31_24_OFFSET 24
+#define D0F0xE4_WRAP_8015_Reserved_31_24_WIDTH 8
+#define D0F0xE4_WRAP_8015_Reserved_31_24_MASK 0xFF000000
+
+/// D0F0xE4_WRAP_8015
+typedef union {
+ struct { ///<
+ UINT32 Bitfield_0_0:1; ///<
+ UINT32 Reserved_1_1:1; ///<
+ UINT32 Reserved_7_2:6; ///<
+ UINT32 Reserved_8_8:1; ///<
+ UINT32 Bitfield_9_9:1; ///<
+ UINT32 Bitfield_10_10:1; ///<
+ UINT32 Bitfield_11_11:1; ///<
+ UINT32 Reserved_13_12:2; ///<
+ UINT32 Bitfield_15_14:2; ///<
+ UINT32 RefclkRegsGateLatency:6; ///<
+ UINT32 Reserved_22_22:1; ///<
+ UINT32 RefclkRegsGateEnable:1; ///<
+ UINT32 Reserved_31_24:8; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_WRAP_8015_STRUCT;
+
+// **** D0F0xE4_WRAP_8016 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8016_ADDRESS 0x8016
+// Type
+#define D0F0xE4_WRAP_8016_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_WRAP_8016_CalibAckLatency_OFFSET 0
+#define D0F0xE4_WRAP_8016_CalibAckLatency_WIDTH 6
+#define D0F0xE4_WRAP_8016_CalibAckLatency_MASK 0x3F
+#define D0F0xE4_WRAP_8016_Reserved_15_6_OFFSET 6
+#define D0F0xE4_WRAP_8016_Reserved_15_6_WIDTH 10
+#define D0F0xE4_WRAP_8016_Reserved_15_6_MASK 0xFFC0
+#define D0F0xE4_WRAP_8016_LclkDynGateLatency_OFFSET 16
+#define D0F0xE4_WRAP_8016_LclkDynGateLatency_WIDTH 6
+#define D0F0xE4_WRAP_8016_LclkDynGateLatency_MASK 0x3F0000
+#define D0F0xE4_WRAP_8016_LclkGateFree_OFFSET 22
+#define D0F0xE4_WRAP_8016_LclkGateFree_WIDTH 1
+#define D0F0xE4_WRAP_8016_LclkGateFree_MASK 0x400000
+#define D0F0xE4_WRAP_8016_LclkDynGateEnable_OFFSET 23
+#define D0F0xE4_WRAP_8016_LclkDynGateEnable_WIDTH 1
+#define D0F0xE4_WRAP_8016_LclkDynGateEnable_MASK 0x800000
+#define D0F0xE4_WRAP_8016_Reserved_31_24_OFFSET 24
+#define D0F0xE4_WRAP_8016_Reserved_31_24_WIDTH 8
+#define D0F0xE4_WRAP_8016_Reserved_31_24_MASK 0xFF000000
+
+/// D0F0xE4_WRAP_8016
+typedef union {
+ struct { ///<
+ UINT32 CalibAckLatency:6; ///<
+ UINT32 Reserved_15_6:10; ///<
+ UINT32 LclkDynGateLatency:6; ///<
+ UINT32 LclkGateFree:1; ///<
+ UINT32 LclkDynGateEnable:1; ///<
+ UINT32 Reserved_31_24:8; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_WRAP_8016_STRUCT;
+
+// **** D0F0xE4_WRAP_8029 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8029_ADDRESS 0x8029
+// Type
+#define D0F0xE4_WRAP_8029_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_WRAP_8029_LaneEnable_OFFSET 0
+#define D0F0xE4_WRAP_8029_LaneEnable_WIDTH 16
+#define D0F0xE4_WRAP_8029_LaneEnable_MASK 0xFFFF
+#define D0F0xE4_WRAP_8029_Reserved_31_16_OFFSET 16
+#define D0F0xE4_WRAP_8029_Reserved_31_16_WIDTH 16
+#define D0F0xE4_WRAP_8029_Reserved_31_16_MASK 0xFFFF0000
+
+/// D0F0xE4_WRAP_8029
+typedef union {
+ struct { ///<
+ UINT32 LaneEnable:16; ///<
+ UINT32 Reserved_31_16:16; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_WRAP_8029_STRUCT;
+
+// **** D0F0xE4_WRAP_8062 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8062_ADDRESS 0x8062
+
+// Type
+#define D0F0xE4_WRAP_8062_TYPE TYPE_D0F0xE4
+// Field Data
+#define D0F0xE4_WRAP_8062_ReconfigureEn_OFFSET 0
+#define D0F0xE4_WRAP_8062_ReconfigureEn_WIDTH 1
+#define D0F0xE4_WRAP_8062_ReconfigureEn_MASK 0x1
+#define D0F0xE4_WRAP_8062_Reserved_1_1_OFFSET 1
+#define D0F0xE4_WRAP_8062_Reserved_1_1_WIDTH 1
+#define D0F0xE4_WRAP_8062_Reserved_1_1_MASK 0x2
+#define D0F0xE4_WRAP_8062_ResetPeriod_OFFSET 2
+#define D0F0xE4_WRAP_8062_ResetPeriod_WIDTH 3
+#define D0F0xE4_WRAP_8062_ResetPeriod_MASK 0x1c
+#define D0F0xE4_WRAP_8062_Reserved_9_5_OFFSET 5
+#define D0F0xE4_WRAP_8062_Reserved_9_5_WIDTH 5
+#define D0F0xE4_WRAP_8062_Reserved_9_5_MASK 0x3e0
+#define D0F0xE4_WRAP_8062_BlockOnIdle_OFFSET 10
+#define D0F0xE4_WRAP_8062_BlockOnIdle_WIDTH 1
+#define D0F0xE4_WRAP_8062_BlockOnIdle_MASK 0x400
+#define D0F0xE4_WRAP_8062_ConfigXferMode_OFFSET 11
+#define D0F0xE4_WRAP_8062_ConfigXferMode_WIDTH 1
+#define D0F0xE4_WRAP_8062_ConfigXferMode_MASK 0x800
+#define D0F0xE4_WRAP_8062_Reserved_31_12_OFFSET 12
+#define D0F0xE4_WRAP_8062_Reserved_31_12_WIDTH 20
+#define D0F0xE4_WRAP_8062_Reserved_31_12_MASK 0xfffff000
+
+/// D0F0xE4_WRAP_8062
+typedef union {
+ struct { ///<
+ UINT32 ReconfigureEn:1 ; ///<
+ UINT32 Reserved_1_1:1 ; ///<
+ UINT32 ResetPeriod:3 ; ///<
+ UINT32 Reserved_9_5:5 ; ///<
+ UINT32 BlockOnIdle:1 ; ///<
+ UINT32 ConfigXferMode:1 ; ///<
+ UINT32 Reserved_31_12:20; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} D0F0xE4_WRAP_8062_STRUCT;
+
+// **** D0F0xE4_PIF_0011 Register Definition ****
+// Address
+#define D0F0xE4_PIF_0011_ADDRESS 0x11
+// Type
+#define D0F0xE4_PIF_0011_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_PIF_0011_X2Lane10_OFFSET 0
+#define D0F0xE4_PIF_0011_X2Lane10_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane10_MASK 0x1
+#define D0F0xE4_PIF_0011_X2Lane32_OFFSET 1
+#define D0F0xE4_PIF_0011_X2Lane32_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane32_MASK 0x2
+#define D0F0xE4_PIF_0011_X2Lane54_OFFSET 2
+#define D0F0xE4_PIF_0011_X2Lane54_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane54_MASK 0x4
+#define D0F0xE4_PIF_0011_X2Lane76_OFFSET 3
+#define D0F0xE4_PIF_0011_X2Lane76_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane76_MASK 0x8
+#define D0F0xE4_PIF_0011_X2Lane98_OFFSET 4
+#define D0F0xE4_PIF_0011_X2Lane98_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane98_MASK 0x10
+#define D0F0xE4_PIF_0011_X2Lane1110_OFFSET 5
+#define D0F0xE4_PIF_0011_X2Lane1110_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane1110_MASK 0x20
+#define D0F0xE4_PIF_0011_X2Lane1312_OFFSET 6
+#define D0F0xE4_PIF_0011_X2Lane1312_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane1312_MASK 0x40
+#define D0F0xE4_PIF_0011_X2Lane1514_OFFSET 7
+#define D0F0xE4_PIF_0011_X2Lane1514_WIDTH 1
+#define D0F0xE4_PIF_0011_X2Lane1514_MASK 0x80
+#define D0F0xE4_PIF_0011_X4Lane30_OFFSET 8
+#define D0F0xE4_PIF_0011_X4Lane30_WIDTH 1
+#define D0F0xE4_PIF_0011_X4Lane30_MASK 0x100
+#define D0F0xE4_PIF_0011_X4Lane74_OFFSET 9
+#define D0F0xE4_PIF_0011_X4Lane74_WIDTH 1
+#define D0F0xE4_PIF_0011_X4Lane74_MASK 0x200
+#define D0F0xE4_PIF_0011_X4Lane118_OFFSET 10
+#define D0F0xE4_PIF_0011_X4Lane118_WIDTH 1
+#define D0F0xE4_PIF_0011_X4Lane118_MASK 0x400
+#define D0F0xE4_PIF_0011_X4Lane1512_OFFSET 11
+#define D0F0xE4_PIF_0011_X4Lane1512_WIDTH 1
+#define D0F0xE4_PIF_0011_X4Lane1512_MASK 0x800
+#define D0F0xE4_PIF_0011_Reserved_15_12_OFFSET 12
+#define D0F0xE4_PIF_0011_Reserved_15_12_WIDTH 4
+#define D0F0xE4_PIF_0011_Reserved_15_12_MASK 0xF000
+#define D0F0xE4_PIF_0011_X8Lane70_OFFSET 16
+#define D0F0xE4_PIF_0011_X8Lane70_WIDTH 1
+#define D0F0xE4_PIF_0011_X8Lane70_MASK 0x10000
+#define D0F0xE4_PIF_0011_X8Lane158_OFFSET 17
+#define D0F0xE4_PIF_0011_X8Lane158_WIDTH 1
+#define D0F0xE4_PIF_0011_X8Lane158_MASK 0x20000
+#define D0F0xE4_PIF_0011_Reserved_19_18_OFFSET 18
+#define D0F0xE4_PIF_0011_Reserved_19_18_WIDTH 2
+#define D0F0xE4_PIF_0011_Reserved_19_18_MASK 0xC0000
+#define D0F0xE4_PIF_0011_X16Lane150_OFFSET 20
+#define D0F0xE4_PIF_0011_X16Lane150_WIDTH 1
+#define D0F0xE4_PIF_0011_X16Lane150_MASK 0x100000
+#define D0F0xE4_PIF_0011_Reserved_24_21_OFFSET 21
+#define D0F0xE4_PIF_0011_Reserved_24_21_WIDTH 4
+#define D0F0xE4_PIF_0011_Reserved_24_21_MASK 0x1E00000
+#define D0F0xE4_PIF_0011_MultiPif_OFFSET 25
+#define D0F0xE4_PIF_0011_MultiPif_WIDTH 1
+#define D0F0xE4_PIF_0011_MultiPif_MASK 0x2000000
+#define D0F0xE4_PIF_0011_Reserved_31_26_OFFSET 26
+#define D0F0xE4_PIF_0011_Reserved_31_26_WIDTH 6
+#define D0F0xE4_PIF_0011_Reserved_31_26_MASK 0xFC000000
+
+/// D0F0xE4_PIF_0011
+typedef union {
+ struct { ///<
+ UINT32 X2Lane10:1; ///<
+ UINT32 X2Lane32:1; ///<
+ UINT32 X2Lane54:1; ///<
+ UINT32 X2Lane76:1; ///<
+ UINT32 X2Lane98:1; ///<
+ UINT32 X2Lane1110:1; ///<
+ UINT32 X2Lane1312:1; ///<
+ UINT32 X2Lane1514:1; ///<
+ UINT32 X4Lane30:1; ///<
+ UINT32 X4Lane74:1; ///<
+ UINT32 X4Lane118:1; ///<
+ UINT32 X4Lane1512:1; ///<
+ UINT32 Reserved_15_12:4; ///<
+ UINT32 X8Lane70:1; ///<
+ UINT32 X8Lane158:1; ///<
+ UINT32 Reserved_19_18:2; ///<
+ UINT32 X16Lane150:1; ///<
+ UINT32 Reserved_24_21:4; ///<
+ UINT32 MultiPif:1; ///<
+ UINT32 Reserved_31_26:6; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_PIF_0011_STRUCT;
+
+// **** D0F0xE4_PIF_0012 Register Definition ****
+// Address
+#define D0F0xE4_PIF_0012_ADDRESS 0x12
+// Type
+#define D0F0xE4_PIF_0012_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_PIF_0012_TxPowerStateInTxs2_OFFSET 0
+#define D0F0xE4_PIF_0012_TxPowerStateInTxs2_WIDTH 3
+#define D0F0xE4_PIF_0012_TxPowerStateInTxs2_MASK 0x7
+#define D0F0xE4_PIF_0012_ForceRxEnInL0s_OFFSET 3
+#define D0F0xE4_PIF_0012_ForceRxEnInL0s_WIDTH 1
+#define D0F0xE4_PIF_0012_ForceRxEnInL0s_MASK 0x8
+#define D0F0xE4_PIF_0012_RxPowerStateInRxs2_OFFSET 4
+#define D0F0xE4_PIF_0012_RxPowerStateInRxs2_WIDTH 3
+#define D0F0xE4_PIF_0012_RxPowerStateInRxs2_MASK 0x70
+#define D0F0xE4_PIF_0012_PllPowerStateInTxs2_OFFSET 7
+#define D0F0xE4_PIF_0012_PllPowerStateInTxs2_WIDTH 3
+#define D0F0xE4_PIF_0012_PllPowerStateInTxs2_MASK 0x380
+#define D0F0xE4_PIF_0012_PllPowerStateInOff_OFFSET 10
+#define D0F0xE4_PIF_0012_PllPowerStateInOff_WIDTH 3
+#define D0F0xE4_PIF_0012_PllPowerStateInOff_MASK 0x1C00
+#define D0F0xE4_PIF_0012_Reserved_15_13_OFFSET 13
+#define D0F0xE4_PIF_0012_Reserved_15_13_WIDTH 3
+#define D0F0xE4_PIF_0012_Reserved_15_13_MASK 0xE000
+#define D0F0xE4_PIF_0012_Tx2p5clkClockGatingEn_OFFSET 16
+#define D0F0xE4_PIF_0012_Tx2p5clkClockGatingEn_WIDTH 1
+#define D0F0xE4_PIF_0012_Tx2p5clkClockGatingEn_MASK 0x10000
+#define D0F0xE4_PIF_0012_Reserved_23_17_OFFSET 17
+#define D0F0xE4_PIF_0012_Reserved_23_17_WIDTH 7
+#define D0F0xE4_PIF_0012_Reserved_23_17_MASK 0xFE0000
+#define D0F0xE4_PIF_0012_PllRampUpTime_OFFSET 24
+#define D0F0xE4_PIF_0012_PllRampUpTime_WIDTH 3
+#define D0F0xE4_PIF_0012_PllRampUpTime_MASK 0x7000000
+#define D0F0xE4_PIF_0012_Reserved_27_27_OFFSET 27
+#define D0F0xE4_PIF_0012_Reserved_27_27_WIDTH 1
+#define D0F0xE4_PIF_0012_Reserved_27_27_MASK 0x8000000
+#define D0F0xE4_PIF_0012_PllPwrOverrideEn_OFFSET 28
+#define D0F0xE4_PIF_0012_PllPwrOverrideEn_WIDTH 1
+#define D0F0xE4_PIF_0012_PllPwrOverrideEn_MASK 0x10000000
+#define D0F0xE4_PIF_0012_PllPwrOverrideVal_OFFSET 29
+#define D0F0xE4_PIF_0012_PllPwrOverrideVal_WIDTH 3
+#define D0F0xE4_PIF_0012_PllPwrOverrideVal_MASK 0xE0000000
+
+/// D0F0xE4_PIF_0012
+typedef union {
+ struct { ///<
+ UINT32 TxPowerStateInTxs2:3; ///<
+ UINT32 ForceRxEnInL0s:1; ///<
+ UINT32 RxPowerStateInRxs2:3; ///<
+ UINT32 PllPowerStateInTxs2:3; ///<
+ UINT32 PllPowerStateInOff:3; ///<
+ UINT32 Reserved_15_13:3; ///<
+ UINT32 Tx2p5clkClockGatingEn:1; ///<
+ UINT32 Reserved_23_17:7; ///<
+ UINT32 PllRampUpTime:3; ///<
+ UINT32 Reserved_27_27:1; ///<
+ UINT32 PllPwrOverrideEn:1; ///<
+ UINT32 PllPwrOverrideVal:3; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_PIF_0012_STRUCT;
+
+// **** D0F0xE4_CORE_0002 Register Definition ****
+// Address
+#define D0F0xE4_CORE_0002_ADDRESS 0x0002
+// Type
+#define D0F0xE4_CORE_0002_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_CORE_0002_HwDebug_0_OFFSET 0
+#define D0F0xE4_CORE_0002_HwDebug_0_WIDTH 1
+#define D0F0xE4_CORE_0002_HwDebug_0_MASK 0x1
+#define D0F0xE4_CORE_0002_Reserved_31_1_OFFSET 1
+#define D0F0xE4_CORE_0002_Reserved_31_1_WIDTH 31
+#define D0F0xE4_CORE_0002_Reserved_31_1_MASK 0xFFFFFFFE
+
+/// D0F0xE4_CORE_0002
+typedef union {
+ struct { ///<
+ UINT32 HwDebug_0:1; ///<
+ UINT32 Reserved_31_1:31; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_CORE_0002_STRUCT;
+
+// **** D0F0xE4_CORE_0010 Register Definition ****
+// Address
+#define D0F0xE4_CORE_0010_ADDRESS 0x10
+// Type
+#define D0F0xE4_CORE_0010_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_CORE_0010_HwInitWrLock_OFFSET 0
+#define D0F0xE4_CORE_0010_HwInitWrLock_WIDTH 1
+#define D0F0xE4_CORE_0010_HwInitWrLock_MASK 0x1
+#define D0F0xE4_CORE_0010_Reserved_8_1_OFFSET 1
+#define D0F0xE4_CORE_0010_Reserved_8_1_WIDTH 8
+#define D0F0xE4_CORE_0010_Reserved_8_1_MASK 0x1FE
+#define D0F0xE4_CORE_0010_UmiNpMemWrite_OFFSET 9
+#define D0F0xE4_CORE_0010_UmiNpMemWrite_WIDTH 1
+#define D0F0xE4_CORE_0010_UmiNpMemWrite_MASK 0x200
+#define D0F0xE4_CORE_0010_RxUmiAdjPayloadSize_OFFSET 10
+#define D0F0xE4_CORE_0010_RxUmiAdjPayloadSize_WIDTH 3
+#define D0F0xE4_CORE_0010_RxUmiAdjPayloadSize_MASK 0x1C00
+#define D0F0xE4_CORE_0010_Reserved_31_13_OFFSET 13
+#define D0F0xE4_CORE_0010_Reserved_31_13_WIDTH 19
+#define D0F0xE4_CORE_0010_Reserved_31_13_MASK 0xFFFFE000
+
+/// D0F0xE4_CORE_0010
+typedef union {
+ struct { ///<
+ UINT32 HwInitWrLock:1; ///<
+ UINT32 Reserved_8_1:8; ///<
+ UINT32 UmiNpMemWrite:1; ///<
+ UINT32 RxUmiAdjPayloadSize:3; ///<
+ UINT32 Reserved_31_13:19; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_CORE_0010_STRUCT;
+
+// **** D0F0xE4_CORE_0011 Register Definition ****
+// Address
+#define D0F0xE4_CORE_0011_ADDRESS 0x11
+// Type
+#define D0F0xE4_CORE_0011_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_CORE_0011_DynClkLatency_OFFSET 0
+#define D0F0xE4_CORE_0011_DynClkLatency_WIDTH 4
+#define D0F0xE4_CORE_0011_DynClkLatency_MASK 0xF
+#define D0F0xE4_CORE_0011_Reserved_31_4_OFFSET 4
+#define D0F0xE4_CORE_0011_Reserved_31_4_WIDTH 28
+#define D0F0xE4_CORE_0011_Reserved_31_4_MASK 0xFFFFFFF0
+
+/// D0F0xE4_CORE_0011
+typedef union {
+ struct { ///<
+ UINT32 DynClkLatency:4; ///<
+ UINT32 Reserved_31_4:28; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_CORE_0011_STRUCT;
+
+// **** D0F0xE4_CORE_001C Register Definition ****
+// Address
+#define D0F0xE4_CORE_001C_ADDRESS 0x1C
+// Type
+#define D0F0xE4_CORE_001C_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_CORE_001C_TxArbRoundRobinEn_OFFSET 0
+#define D0F0xE4_CORE_001C_TxArbRoundRobinEn_WIDTH 1
+#define D0F0xE4_CORE_001C_TxArbRoundRobinEn_MASK 0x1
+#define D0F0xE4_CORE_001C_TxArbSlvLimit_OFFSET 1
+#define D0F0xE4_CORE_001C_TxArbSlvLimit_WIDTH 5
+#define D0F0xE4_CORE_001C_TxArbSlvLimit_MASK 0x3E
+#define D0F0xE4_CORE_001C_TxArbMstLimit_OFFSET 6
+#define D0F0xE4_CORE_001C_TxArbMstLimit_WIDTH 5
+#define D0F0xE4_CORE_001C_TxArbMstLimit_MASK 0x7C0
+#define D0F0xE4_CORE_001C_Reserved_31_11_OFFSET 11
+#define D0F0xE4_CORE_001C_Reserved_31_11_WIDTH 21
+#define D0F0xE4_CORE_001C_Reserved_31_11_MASK 0xFFFFF800
+
+/// D0F0xE4_CORE_001C
+typedef union {
+ struct { ///<
+ UINT32 TxArbRoundRobinEn:1; ///<
+ UINT32 TxArbSlvLimit:5; ///<
+ UINT32 TxArbMstLimit:5; ///<
+ UINT32 Reserved_31_11:21; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_CORE_001C_STRUCT;
+
+// **** D0F0xE4_CORE_0020 Register Definition ****
+// Address
+#define D0F0xE4_CORE_0020_ADDRESS 0x0020
+// Type
+#define D0F0xE4_CORE_0020_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_CORE_0020_Reserved_7_0_OFFSET 0
+#define D0F0xE4_CORE_0020_Reserved_7_0_WIDTH 8
+#define D0F0xE4_CORE_0020_Reserved_7_0_MASK 0xFF
+#define D0F0xE4_CORE_0020_CiSlvOrderingDis_OFFSET 8
+#define D0F0xE4_CORE_0020_CiSlvOrderingDis_WIDTH 1
+#define D0F0xE4_CORE_0020_CiSlvOrderingDis_MASK 0x100
+#define D0F0xE4_CORE_0020_CiRcOrderingDis_OFFSET 9
+#define D0F0xE4_CORE_0020_CiRcOrderingDis_WIDTH 1
+#define D0F0xE4_CORE_0020_CiRcOrderingDis_MASK 0x200
+#define D0F0xE4_CORE_0020_Reserved_31_10_OFFSET 10
+#define D0F0xE4_CORE_0020_Reserved_31_10_WIDTH 22
+#define D0F0xE4_CORE_0020_Reserved_31_10_MASK 0xFFFFFC00
+
+/// D0F0xE4_CORE_0020
+typedef union {
+ struct { ///<
+ UINT32 Reserved_7_0:8; ///<
+ UINT32 CiSlvOrderingDis:1; ///<
+ UINT32 CiRcOrderingDis:1; ///<
+ UINT32 Reserved_31_10:22; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_CORE_0020_STRUCT;
+
+// **** D0F0xE4_CORE_0040 Register Definition ****
+// Address
+#define D0F0xE4_CORE_0040_ADDRESS 0x40
+// Type
+#define D0F0xE4_CORE_0040_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_CORE_0040_Reserved_13_0_OFFSET 0
+#define D0F0xE4_CORE_0040_Reserved_13_0_WIDTH 14
+#define D0F0xE4_CORE_0040_Reserved_13_0_MASK 0x3FFF
+#define D0F0xE4_CORE_0040_PElecIdleMode_OFFSET 14
+#define D0F0xE4_CORE_0040_PElecIdleMode_WIDTH 2
+#define D0F0xE4_CORE_0040_PElecIdleMode_MASK 0xC000
+#define D0F0xE4_CORE_0040_Reserved_31_16_OFFSET 16
+#define D0F0xE4_CORE_0040_Reserved_31_16_WIDTH 16
+#define D0F0xE4_CORE_0040_Reserved_31_16_MASK 0xFFFF0000
+
+/// D0F0xE4_CORE_0040
+typedef union {
+ struct { ///<
+ UINT32 Reserved_13_0:14; ///<
+ UINT32 PElecIdleMode:2; ///<
+ UINT32 Reserved_31_16:16; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_CORE_0040_STRUCT;
+
+// **** D0F0xE4_CORE_00B0 Register Definition ****
+// Address
+#define D0F0xE4_CORE_00B0_ADDRESS 0xB0
+// Type
+#define D0F0xE4_CORE_00B0_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_CORE_00B0_Reserved_1_0_OFFSET 0
+#define D0F0xE4_CORE_00B0_Reserved_1_0_WIDTH 2
+#define D0F0xE4_CORE_00B0_Reserved_1_0_MASK 0x3
+#define D0F0xE4_CORE_00B0_StrapF0MsiEn_OFFSET 2
+#define D0F0xE4_CORE_00B0_StrapF0MsiEn_WIDTH 1
+#define D0F0xE4_CORE_00B0_StrapF0MsiEn_MASK 0x4
+#define D0F0xE4_CORE_00B0_Reserved_4_3_OFFSET 3
+#define D0F0xE4_CORE_00B0_Reserved_4_3_WIDTH 2
+#define D0F0xE4_CORE_00B0_Reserved_4_3_MASK 0x18
+#define D0F0xE4_CORE_00B0_StrapF0AerEn_OFFSET 5
+#define D0F0xE4_CORE_00B0_StrapF0AerEn_WIDTH 1
+#define D0F0xE4_CORE_00B0_StrapF0AerEn_MASK 0x20
+#define D0F0xE4_CORE_00B0_Reserved_31_6_OFFSET 6
+#define D0F0xE4_CORE_00B0_Reserved_31_6_WIDTH 26
+#define D0F0xE4_CORE_00B0_Reserved_31_6_MASK 0xFFFFFFC0
+
+/// D0F0xE4_CORE_00B0
+typedef union {
+ struct { ///<
+ UINT32 Reserved_1_0:2; ///<
+ UINT32 StrapF0MsiEn:1; ///<
+ UINT32 Reserved_4_3:2; ///<
+ UINT32 StrapF0AerEn:1; ///<
+ UINT32 Reserved_31_6:26; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_CORE_00B0_STRUCT;
+
+// **** D0F0xE4_CORE_00C1 Register Definition ****
+// Address
+#define D0F0xE4_CORE_00C1_ADDRESS 0xC1
+// Type
+#define D0F0xE4_CORE_00C1_TYPE TYPE_D0F0xE4
+
+// Field Data
+#define D0F0xE4_CORE_00C1_StrapLinkBwNotificationCapEn_OFFSET 0
+#define D0F0xE4_CORE_00C1_StrapLinkBwNotificationCapEn_WIDTH 1
+#define D0F0xE4_CORE_00C1_StrapLinkBwNotificationCapEn_MASK 0x1
+#define D0F0xE4_CORE_00C1_StrapGen2Compliance_OFFSET 1
+#define D0F0xE4_CORE_00C1_StrapGen2Compliance_WIDTH 1
+#define D0F0xE4_CORE_00C1_StrapGen2Compliance_MASK 0x2
+#define D0F0xE4_CORE_00C1_Reserved_31_2_OFFSET 2
+#define D0F0xE4_CORE_00C1_Reserved_31_2_WIDTH 30
+#define D0F0xE4_CORE_00C1_Reserved_31_2_MASK 0xFFFFFFFC
+
+/// D0F0xE4_CORE_00C1
+typedef union {
+ struct { ///<
+ UINT32 StrapLinkBwNotificationCapEn:1; ///<
+ UINT32 StrapGen2Compliance:1; ///<
+ UINT32 Reserved_31_2:30; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xE4_CORE_00C1_STRUCT;
+
+// **** DxFxxE4_x70 Register Definition ****
+// Address
+#define DxFxxE4_x70_ADDRESS 0x70
+// Type
+#define DxFxxE4_x70_TYPE TYPE_D2F1xE4
+
+// Field Data
+#define DxFxxE4_x70_Reserved_15_0_OFFSET 0
+#define DxFxxE4_x70_Reserved_15_0_WIDTH 16
+#define DxFxxE4_x70_Reserved_15_0_MASK 0xFFFF
+#define DxFxxE4_x70_RxRcbCplTimeout_OFFSET 16
+#define DxFxxE4_x70_RxRcbCplTimeout_WIDTH 3
+#define DxFxxE4_x70_RxRcbCplTimeout_MASK 0x70000
+#define DxFxxE4_x70_RxRcbCplTimeoutMode_OFFSET 19
+#define DxFxxE4_x70_RxRcbCplTimeoutMode_WIDTH 1
+#define DxFxxE4_x70_RxRcbCplTimeoutMode_MASK 0x80000
+#define DxFxxE4_x70_Reserved_31_20_OFFSET 20
+#define DxFxxE4_x70_Reserved_31_20_WIDTH 12
+#define DxFxxE4_x70_Reserved_31_20_MASK 0xFFF00000
+
+/// DxFxxE4_x70
+typedef union {
+ struct { ///<
+ UINT32 Reserved_15_0:16; ///<
+ UINT32 RxRcbCplTimeout:3; ///<
+ UINT32 RxRcbCplTimeoutMode:1; ///<
+ UINT32 Reserved_31_20:12; ///<
+
+ } Field;
+
+ UINT32 Value;
+} DxFxxE4_x70_STRUCT;
+
+// **** DxFxxE4_xA0 Register Definition ****
+// Address
+#define DxFxxE4_xA0_ADDRESS 0xA0
+// Type
+#define DxFxxE4_xA0_TYPE TYPE_D2F1xE4
+
+// Field Data
+#define DxFxxE4_xA0_Reserved_3_0_OFFSET 0
+#define DxFxxE4_xA0_Reserved_3_0_WIDTH 4
+#define DxFxxE4_xA0_Reserved_3_0_MASK 0xF
+#define DxFxxE4_xA0_Lc16xClearTxPipe_OFFSET 4
+#define DxFxxE4_xA0_Lc16xClearTxPipe_WIDTH 4
+#define DxFxxE4_xA0_Lc16xClearTxPipe_MASK 0xF0
+#define DxFxxE4_xA0_LcL0sInactivity_OFFSET 8
+#define DxFxxE4_xA0_LcL0sInactivity_WIDTH 4
+#define DxFxxE4_xA0_LcL0sInactivity_MASK 0xF00
+#define DxFxxE4_xA0_LcL1Inactivity_OFFSET 12
+#define DxFxxE4_xA0_LcL1Inactivity_WIDTH 4
+#define DxFxxE4_xA0_LcL1Inactivity_MASK 0xF000
+#define DxFxxE4_xA0_Reserved_22_16_OFFSET 16
+#define DxFxxE4_xA0_Reserved_22_16_WIDTH 7
+#define DxFxxE4_xA0_Reserved_22_16_MASK 0x7F0000
+#define DxFxxE4_xA0_LcL1ImmediateAck_OFFSET 23
+#define DxFxxE4_xA0_LcL1ImmediateAck_WIDTH 1
+#define DxFxxE4_xA0_LcL1ImmediateAck_MASK 0x800000
+#define DxFxxE4_xA0_Reserved_31_24_OFFSET 24
+#define DxFxxE4_xA0_Reserved_31_24_WIDTH 8
+#define DxFxxE4_xA0_Reserved_31_24_MASK 0xFF000000
+
+/// DxFxxE4_xA0
+typedef union {
+ struct { ///<
+ UINT32 Reserved_3_0:4; ///<
+ UINT32 Lc16xClearTxPipe:4; ///<
+ UINT32 LcL0sInactivity:4; ///<
+ UINT32 LcL1Inactivity:4; ///<
+ UINT32 Reserved_22_16:7; ///<
+ UINT32 LcL1ImmediateAck:1; ///<
+ UINT32 Reserved_31_24:8; ///<
+
+ } Field;
+
+ UINT32 Value;
+} DxFxxE4_xA0_STRUCT;
+
+// **** DxFxxE4_xA1 Register Definition ****
+// Address
+#define DxFxxE4_xA1_ADDRESS 0xA1
+// Type
+#define DxFxxE4_xA1_TYPE TYPE_D2F1xE4
+
+// Field Data
+#define DxFxxE4_xA1_Reserved_10_0_OFFSET 0
+#define DxFxxE4_xA1_Reserved_10_0_WIDTH 11
+#define DxFxxE4_xA1_Reserved_10_0_MASK 0x7FF
+#define DxFxxE4_xA1_LcDontGotoL0sifL1Armed_OFFSET 11
+#define DxFxxE4_xA1_LcDontGotoL0sifL1Armed_WIDTH 1
+#define DxFxxE4_xA1_LcDontGotoL0sifL1Armed_MASK 0x800
+#define DxFxxE4_xA1_Reserved_31_12_OFFSET 12
+#define DxFxxE4_xA1_Reserved_31_12_WIDTH 20
+#define DxFxxE4_xA1_Reserved_31_12_MASK 0xFFFFF000
+
+/// DxFxxE4_xA1
+typedef union {
+ struct { ///<
+ UINT32 Reserved_10_0:11; ///<
+ UINT32 LcDontGotoL0sifL1Armed:1; ///<
+ UINT32 Reserved_31_12:20; ///<
+
+ } Field;
+
+ UINT32 Value;
+} DxFxxE4_xA1_STRUCT;
+
+// **** DxFxxE4_xA3 Register Definition ****
+// Address
+#define DxFxxE4_xA3_ADDRESS 0xA3
+// Type
+#define DxFxxE4_xA3_TYPE TYPE_D2F1xE4
+
+// Field Data
+#define DxFxxE4_xA3_Reserved_8_0_OFFSET 0
+#define DxFxxE4_xA3_Reserved_8_0_WIDTH 9
+#define DxFxxE4_xA3_Reserved_8_0_MASK 0x1FF
+#define DxFxxE4_xA3_LcXmitFtsBeforeRecovery_OFFSET 9
+#define DxFxxE4_xA3_LcXmitFtsBeforeRecovery_WIDTH 1
+#define DxFxxE4_xA3_LcXmitFtsBeforeRecovery_MASK 0x200
+#define DxFxxE4_xA3_Reserved_31_10_OFFSET 10
+#define DxFxxE4_xA3_Reserved_31_10_WIDTH 22
+#define DxFxxE4_xA3_Reserved_31_10_MASK 0xFFFFFC00
+
+/// DxFxxE4_xA3
+typedef union {
+ struct { ///<
+ UINT32 Reserved_8_0:9; ///<
+ UINT32 LcXmitFtsBeforeRecovery:1; ///<
+ UINT32 Reserved_31_10:22; ///<
+
+ } Field;
+
+ UINT32 Value;
+} DxFxxE4_xA3_STRUCT;
+
+// **** DxFxxE4_xB1 Register Definition ****
+// Address
+#define DxFxxE4_xB1_ADDRESS 0xB1
+// Type
+#define DxFxxE4_xB1_TYPE TYPE_D2F1xE4
+
+// Field Data
+#define DxFxxE4_xB1_Reserved_13_0_OFFSET 0
+#define DxFxxE4_xB1_Reserved_13_0_WIDTH 14
+#define DxFxxE4_xB1_Reserved_13_0_MASK 0x3FFF
+#define DxFxxE4_xB1_LcElecIdleMode_OFFSET 14
+#define DxFxxE4_xB1_LcElecIdleMode_WIDTH 2
+#define DxFxxE4_xB1_LcElecIdleMode_MASK 0xc000
+#define DxFxxE4_xB1_Reserved_18_16_OFFSET 16
+#define DxFxxE4_xB1_Reserved_18_16_WIDTH 3
+#define DxFxxE4_xB1_Reserved_18_16_MASK 0x70000
+#define DxFxxE4_xB1_LcDeassertRxEnInL0s_OFFSET 19
+#define DxFxxE4_xB1_LcDeassertRxEnInL0s_WIDTH 1
+#define DxFxxE4_xB1_LcDeassertRxEnInL0s_MASK 0x80000
+#define DxFxxE4_xB1_LcBlockElIdleinL0_OFFSET 20
+#define DxFxxE4_xB1_LcBlockElIdleinL0_WIDTH 1
+#define DxFxxE4_xB1_LcBlockElIdleinL0_MASK 0x100000
+#define DxFxxE4_xB1_Reserved_31_21_OFFSET 21
+#define DxFxxE4_xB1_Reserved_31_21_WIDTH 11
+#define DxFxxE4_xB1_Reserved_31_21_MASK 0xFFE00000
+
+/// DxFxxE4_xB1
+typedef union {
+ struct { ///<
+ UINT32 Reserved_13_0:14; ///<
+ UINT32 LcElecIdleMode:2 ; ///<
+ UINT32 Reserved_18_16:3 ; ///<
+ UINT32 LcDeassertRxEnInL0s:1; ///<
+ UINT32 LcBlockElIdleinL0:1; ///<
+ UINT32 Reserved_31_21:11; ///<
+
+ } Field;
+ UINT32 Value;
+} DxFxxE4_xB1_STRUCT;
+
+// **** DxFxxE4_xC0 Register Definition ****
+// Address
+// Type
+#define DxFxxE4_xC0_TYPE TYPE_D2F1xE4
+
+// Field Data
+#define DxFxxE4_xC0_Reserved_3_0_OFFSET 0
+#define DxFxxE4_xC0_Reserved_3_0_WIDTH 4
+#define DxFxxE4_xC0_Reserved_3_0_MASK 0xF
+#define DxFxxE4_xC0_Reserved_12_6_OFFSET 6
+#define DxFxxE4_xC0_Reserved_12_6_WIDTH 7
+#define DxFxxE4_xC0_Reserved_12_6_MASK 0x1FC0
+#define DxFxxE4_xC0_StrapForceCompliance_OFFSET 13
+#define DxFxxE4_xC0_StrapForceCompliance_WIDTH 1
+#define DxFxxE4_xC0_StrapForceCompliance_MASK 0x2000
+#define DxFxxE4_xC0_Reserved_14_14_OFFSET 14
+#define DxFxxE4_xC0_Reserved_14_14_WIDTH 1
+#define DxFxxE4_xC0_Reserved_14_14_MASK 0x4000
+#define DxFxxE4_xC0_StrapAutoRcSpeedNegotiationDis_OFFSET 15
+#define DxFxxE4_xC0_StrapAutoRcSpeedNegotiationDis_WIDTH 1
+#define DxFxxE4_xC0_StrapAutoRcSpeedNegotiationDis_MASK 0x8000
+#define DxFxxE4_xC0_Reserved_31_19_OFFSET 19
+#define DxFxxE4_xC0_Reserved_31_19_WIDTH 13
+#define DxFxxE4_xC0_Reserved_31_19_MASK 0xfff80000
+
+/// DxFxxE4_xC0
+typedef union {
+ struct { ///<
+ UINT32 Reserved_3_0:4 ; ///<
+ UINT32 StrapMedyTSxCount:2 ; ///<
+ UINT32 Reserved_12_6:7 ; ///<
+ UINT32 StrapForceCompliance:1 ; ///<
+ UINT32 Reserved_14_14:1 ; ///<
+ UINT32 StrapAutoRcSpeedNegotiationDis:1 ; ///<
+ UINT32 StrapLaneNegotiation:3 ; ///<
+ UINT32 Reserved_31_19:13; ///<
+ } Field;
+ UINT32 Value;
+} DxFxxE4_xC0_STRUCT;
+
+
+
+
+typedef union {
+ struct { ///<
+ UINT32 Reserved_1_0:2; ///<
+ UINT32 bit2:1; ///<
+ UINT32 Reserved_3_3:1; ///<
+ UINT32 Reserved_7_4:4; ///<
+ UINT32 Reserved_8_8:1; ///<
+ UINT32 Reserved_31_9:23; ///<
+
+ } Field;
+
+ UINT32 Value;
+} GnbRegistersKB7208_STRUCT;
+
+
+typedef union {
+ struct { ///<
+ UINT32 Reserved_16_0:17; ///<
+ UINT32 bit17:1 ; ///<
+ UINT32 Reserved_31_18:14; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} GnbRegistersKB7236_STRUCT;
+
+typedef union {
+ struct { ///<
+ UINT32 Reserved_15_0:16; ///<
+ UINT32 bit16:1; ///<
+ UINT32 Reserved_17_17:1; ///<
+ UINT32 Reserved_31_18:14; ///<
+
+ } Field;
+
+ UINT32 Value;
+} GnbRegistersKB7269_STRUCT;
+
+typedef union {
+ struct { ///<
+ UINT32 Reserved_7_0:8; ///<
+ UINT32 StrapBifF0LegacyDeviceTypeDis:1; ///<
+ UINT32 Reserved_9_9:1; ///<
+ UINT32 bita:1; ///<
+ UINT32 Reserved_12_11:2; ///<
+ UINT32 bit13:1; ///<
+ UINT32 Reserved_31_14:18; ///<
+
+ } Field;
+
+ UINT32 Value;
+} GnbRegistersKB7314_STRUCT;
+
+typedef union {
+ struct { ///<
+ UINT32 Reserved_19_0:20; ///<
+ UINT32 bit_20:1; ///<
+ UINT32 Reserved_31_21:11; ///<
+ } Field; ///<
+ UINT32 Value; ///<
+} GnbRegistersKB7341_STRUCT;
+
+
+// **** D0F0xD4_x010914E1 Register Definition ****
+// Address
+#define D0F0xD4_x010914E1_ADDRESS 0x10914E1
+// Type
+#define D0F0xD4_x010914E1_TYPE TYPE_D0F0xD4
+
+// Field Data
+#define D0F0xD4_x010914E1_Reserved_0_0_OFFSET 0
+#define D0F0xD4_x010914E1_Reserved_0_0_WIDTH 1
+#define D0F0xD4_x010914E1_Reserved_0_0_MASK 0x1
+#define D0F0xD4_x010914E1_StrapBifRegApSize_OFFSET 1
+#define D0F0xD4_x010914E1_StrapBifRegApSize_WIDTH 2
+#define D0F0xD4_x010914E1_StrapBifRegApSize_MASK 0x6
+#define D0F0xD4_x010914E1_StrapBifMemApSize_OFFSET 3
+#define D0F0xD4_x010914E1_StrapBifMemApSize_WIDTH 3
+#define D0F0xD4_x010914E1_StrapBifMemApSize_MASK 0x38
+#define D0F0xD4_x010914E1_Reserved_11_6_OFFSET 6
+#define D0F0xD4_x010914E1_Reserved_11_6_WIDTH 6
+#define D0F0xD4_x010914E1_Reserved_11_6_MASK 0xFC0
+#define D0F0xD4_x010914E1_StrapBifDoorbellBarDis_OFFSET 12
+#define D0F0xD4_x010914E1_StrapBifDoorbellBarDis_WIDTH 1
+#define D0F0xD4_x010914E1_StrapBifDoorbellBarDis_MASK 0x1000
+#define D0F0xD4_x010914E1_Bitfield_13_13_OFFSET 13
+#define D0F0xD4_x010914E1_Bitfield_13_13_WIDTH 1
+#define D0F0xD4_x010914E1_Bitfield_13_13_MASK 0x2000
+#define D0F0xD4_x010914E1_Bitfield_15_14_OFFSET 14
+#define D0F0xD4_x010914E1_Bitfield_15_14_WIDTH 2
+#define D0F0xD4_x010914E1_Bitfield_15_14_MASK 0xC000
+#define D0F0xD4_x010914E1_Reserved_31_13_OFFSET 16
+#define D0F0xD4_x010914E1_Reserved_31_13_WIDTH 16
+#define D0F0xD4_x010914E1_Reserved_31_13_MASK 0xFFFF0000
+
+/// D0F0xD4_x010914E1
+typedef union {
+ struct { ///<
+ UINT32 Reserved_0_0:1; ///<
+ UINT32 StrapBifRegApSize:2; ///<
+ UINT32 StrapBifMemApSize:3; ///<
+ UINT32 Reserved_11_6:6; ///<
+ UINT32 StrapBifDoorbellBarDis:1; ///<
+ UINT32 Bitfield_13_13:1; ///<
+ UINT32 Bitfield_15_14:2; ///<
+ UINT32 Reserved_31_13:16; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xD4_x010914E1_STRUCT;
+
+// **** D0F0xD4_x010914E2 Register Definition ****
+// Address
+#define D0F0xD4_x010914E2_ADDRESS 0x10914E2
+// Type
+#define D0F0xD4_x010914E2_TYPE TYPE_D0F0xD4
+
+// Field Data
+#define D0F0xD4_x010914E2_Reserved_0_0_OFFSET 0
+#define D0F0xD4_x010914E2_Reserved_0_0_WIDTH 1
+#define D0F0xD4_x010914E2_Reserved_0_0_MASK 0x1
+#define D0F0xD4_x010914E2_StrapBifIoBarDis_OFFSET 1
+#define D0F0xD4_x010914E2_StrapBifIoBarDis_WIDTH 1
+#define D0F0xD4_x010914E2_StrapBifIoBarDis_MASK 0x2
+#define D0F0xD4_x010914E2_StrapBifF064BarDisA_OFFSET 3
+#define D0F0xD4_x010914E2_StrapBifF064BarDisA_WIDTH 1
+#define D0F0xD4_x010914E2_StrapBifF064BarDisA_MASK 0x8
+
+/// D0F0xD4_x010914E2
+typedef union {
+ struct { ///<
+ UINT32 Reserved_0_0:1; ///<
+ UINT32 StrapBifIoBarDis:1; ///<
+ UINT32 Reserved_2_2:1; ///<
+ UINT32 StrapBifF064BarDisA:1; ///<
+ UINT32 Reserved_7_4:4; ///<
+ UINT32 bit8:1; ///<
+ UINT32 Reserved_9_9:1; ///<
+ UINT32 bita:1; ///<
+ UINT32 Reserved_12_11:2; ///<
+ UINT32 bit13:1; ///<
+ UINT32 Reserved_31_14:18; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xD4_x010914E2_STRUCT;
+
+// **** D0F0xD4_x01091507 Register Definition ****
+// Address
+#define D0F0xD4_x01091507_ADDRESS 0x1091507
+// Type
+#define D0F0xD4_x01091507_TYPE TYPE_D0F0xD4
+
+// Field Data
+#define D0F0xD4_x01091507_StrapBifMemApSizePin_OFFSET 5
+#define D0F0xD4_x01091507_StrapBifMemApSizePin_WIDTH 3
+#define D0F0xD4_x01091507_StrapBifMemApSizePin_MASK 0xE0
+
+/// D0F0xD4_x01091507
+typedef union {
+ struct { ///<
+ UINT32 Reserved_4_0:5; ///<
+ UINT32 StrapBifMemApSizePin:3; ///<
+ UINT32 Reserved_15_8:8; ///<
+ UINT32 bit16:1; ///<
+ UINT32 Reserved_31_17:15; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xD4_x01091507_STRUCT;
+
+typedef union {
+ struct { ///<
+ UINT32 bit0:1; ///<
+ UINT32 Reserved_31_1:31; ///<
+
+ } Field;
+
+ UINT32 Value;
+} GnbRegistersKB7514_STRUCT;
+
+
+// **** D0F0xFC_x00 Register Definition ****
+// Address
+#define D0F0xFC_x00_ADDRESS 0x0
+// Type
+#define D0F0xFC_x00_TYPE TYPE_D0F0xFC
+
+// Field Data
+#define D0F0xFC_x00_IoapicEnable_OFFSET 0
+#define D0F0xFC_x00_IoapicEnable_WIDTH 1
+#define D0F0xFC_x00_IoapicEnable_MASK 0x1
+#define D0F0xFC_x00_Reserved_1_1_OFFSET 1
+#define D0F0xFC_x00_Reserved_1_1_WIDTH 1
+#define D0F0xFC_x00_Reserved_1_1_MASK 0x2
+#define D0F0xFC_x00_IoapicIdExtEn_OFFSET 2
+#define D0F0xFC_x00_IoapicIdExtEn_WIDTH 1
+#define D0F0xFC_x00_IoapicIdExtEn_MASK 0x4
+#define D0F0xFC_x00_Reserved_3_3_OFFSET 3
+#define D0F0xFC_x00_Reserved_3_3_WIDTH 1
+#define D0F0xFC_x00_Reserved_3_3_MASK 0x8
+#define D0F0xFC_x00_IoapicSbFeatureEn_OFFSET 4
+#define D0F0xFC_x00_IoapicSbFeatureEn_WIDTH 1
+#define D0F0xFC_x00_IoapicSbFeatureEn_MASK 0x10
+#define D0F0xFC_x00_Reserved_31_5_OFFSET 5
+#define D0F0xFC_x00_Reserved_31_5_WIDTH 27
+#define D0F0xFC_x00_Reserved_31_5_MASK 0xFFFFFFE0
+
+/// D0F0xFC_x00
+typedef union {
+ struct { ///<
+ UINT32 IoapicEnable:1; ///<
+ UINT32 Reserved_1_1:1; ///<
+ UINT32 IoapicIdExtEn:1; ///<
+ UINT32 Reserved_3_3:1; ///<
+ UINT32 IoapicSbFeatureEn:1; ///<
+ UINT32 Reserved_31_5:27; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xFC_x00_STRUCT;
+
+// **** D0F0xFC_x0F Register Definition ****
+// Address
+#define D0F0xFC_x0F_ADDRESS 0x0F
+// Type
+#define D0F0xFC_x0F_TYPE TYPE_D0F0xFC
+
+// Field Data
+#define D0F0xFC_x0F_GBIFExtIntrGrp_OFFSET 0
+#define D0F0xFC_x0F_GBIFExtIntrGrp_WIDTH 3
+#define D0F0xFC_x0F_GBIFExtIntrGrp_MASK 0x7
+#define D0F0xFC_x0F_Reserved_3_3_OFFSET 3
+#define D0F0xFC_x0F_Reserved_3_3_WIDTH 1
+#define D0F0xFC_x0F_Reserved_3_3_MASK 0x8
+#define D0F0xFC_x0F_GBIFExtIntrSwz_OFFSET 4
+#define D0F0xFC_x0F_GBIFExtIntrSwz_WIDTH 2
+#define D0F0xFC_x0F_GBIFExtIntrSwz_MASK 0x30
+#define D0F0xFC_x0F_Reserved_31_6_OFFSET 6
+#define D0F0xFC_x0F_Reserved_31_6_WIDTH 26
+#define D0F0xFC_x0F_Reserved_31_6_MASK 0xFFFFFFC0
+
+/// D0F0xFC_xOF
+typedef union {
+ struct { ///<
+ UINT32 GBIFExtIntrGrp:3; ///<
+ UINT32 Reserved_3_3:1; ///<
+ UINT32 GBIFExtIntrSwz:2; ///<
+ UINT32 Reserved_31_6:26; ///<
+ } Field;
+
+ UINT32 Value;
+} D0F0xFC_x0F_STRUCT;
+
+// **** D0F0xFC_x10 Register Definition ****
+// Address
+#define D0F0xFC_x10_ADDRESS 0x10
+// Type
+#define D0F0xFC_x10_TYPE TYPE_D0F0xFC
+
+// Field Data
+#define D0F0xFC_x10_BrExtIntrGrp_OFFSET 0
+#define D0F0xFC_x10_BrExtIntrGrp_WIDTH 3
+#define D0F0xFC_x10_BrExtIntrGrp_MASK 0x7
+#define D0F0xFC_x10_Reserved_3_3_OFFSET 3
+#define D0F0xFC_x10_Reserved_3_3_WIDTH 1
+#define D0F0xFC_x10_Reserved_3_3_MASK 0x8
+#define D0F0xFC_x10_BrExtIntrSwz_OFFSET 4
+#define D0F0xFC_x10_BrExtIntrSwz_WIDTH 2
+#define D0F0xFC_x10_BrExtIntrSwz_MASK 0x30
+#define D0F0xFC_x10_Reserved_15_6_OFFSET 6
+#define D0F0xFC_x10_Reserved_15_6_WIDTH 10
+#define D0F0xFC_x10_Reserved_15_6_MASK 0xFFC0
+#define D0F0xFC_x10_BrIntIntrMap_OFFSET 16
+#define D0F0xFC_x10_BrIntIntrMap_WIDTH 5
+#define D0F0xFC_x10_BrIntIntrMap_MASK 0x1F0000
+#define D0F0xFC_x10_Reserved_31_21_OFFSET 21
+#define D0F0xFC_x10_Reserved_31_21_WIDTH 11
+#define D0F0xFC_x10_Reserved_31_21_MASK 0xFFE00000
+
+/// D0F0xFC_x10
+typedef union {
+ struct { ///<
+ UINT32 BrExtIntrGrp:3; ///<
+ UINT32 Reserved_3_3:1; ///<
+ UINT32 BrExtIntrSwz:2; ///<
+ UINT32 Reserved_15_6:10; ///<
+ UINT32 BrIntIntrMap:5; ///<
+ UINT32 Reserved_31_21:11; ///<
+
+ } Field;
+
+ UINT32 Value;
+} D0F0xFC_x10_STRUCT;
+
+
+// **** D0F0x90 Register Definition ****
+// Address
+#define D0F0x90_ADDRESS 0x90
+// Type
+#define D0F0x90_TYPE TYPE_D0F0
+
+// **** D0F0x94 Register Definition ****
+// Address
+#define D0F0x94_ADDRESS 0x94
+// Type
+#define D0F0x94_TYPE TYPE_D0F0
+
+
+// **** D18F1xF0 Register Definition ****
+// Address
+#define D18F1xF0_ADDRESS 0xF0
+// Type
+#define D18F1xF0_TYPE TYPE_D18F1
+
+// **** D18F1x200 Register Definition ****
+// Address
+#define D18F1x200_ADDRESS 0x200
+// Type
+#define D18F1x200_TYPE TYPE_D18F1
+
+// **** D18F1x204 Register Definition ****
+// Address
+#define D18F1x204_ADDRESS 0x204
+// Type
+#define D18F1x204_TYPE TYPE_D18F1
+
+// **** D18F1x240 Register Definition ****
+// Address
+#define D18F1x240_ADDRESS 0x240
+// Type
+#define D18F1x240_TYPE TYPE_D18F1
+
+// **** D18F2x40_dct0 Register Definition ****
+// Address
+#define D18F2x40_dct0_ADDRESS 0x40
+// Type
+#define D18F2x40_dct0_TYPE TYPE_D18F2_dct0
+
+// **** D18F2x44_dct0 Register Definition ****
+// Address
+#define D18F2x44_dct0_ADDRESS 0x44
+// Type
+#define D18F2x44_dct0_TYPE TYPE_D18F2_dct0
+
+// **** D18F2x48_dct0 Register Definition ****
+// Address
+#define D18F2x48_dct0_ADDRESS 0x48
+// Type
+#define D18F2x48_dct0_TYPE TYPE_D18F2_dct0
+
+// **** D18F2x4C_dct0 Register Definition ****
+// Address
+#define D18F2x4C_dct0_ADDRESS 0x4C
+// Type
+#define D18F2x4C_dct0_TYPE TYPE_D18F2_dct0
+
+// **** D18F2x60_dct0 Register Definition ****
+// Address
+#define D18F2x60_dct0_ADDRESS 0x60
+// Type
+#define D18F2x60_dct0_TYPE TYPE_D18F2_dct0
+
+// **** D18F2x64_dct0 Register Definition ****
+// Address
+#define D18F2x64_dct0_ADDRESS 0x64
+// Type
+#define D18F2x64_dct0_TYPE TYPE_D18F2_dct0
+
+// **** D18F2x80_dct0 Register Definition ****
+// Address
+#define D18F2x80_dct0_ADDRESS 0x80
+// Type
+#define D18F2x80_dct0_TYPE TYPE_D18F2_dct0
+
+// **** D18F2xA8_dct0 Register Definition ****
+// Address
+#define D18F2xA8_dct0_ADDRESS 0xA8
+// Type
+#define D18F2xA8_dct0_TYPE TYPE_D18F2_dct0
+
+// **** D18F2x78_dct0 Register Definition ****
+// Address
+#define D18F2x78_dct0_ADDRESS 0x78
+// Type
+#define D18F2x78_dct0_TYPE TYPE_D18F2_dct0
+
+// **** D18F2x110 Register Definition ****
+// Address
+#define D18F2x110_ADDRESS 0x110
+// Type
+#define D18F2x110_TYPE TYPE_D18F2
+
+// **** D18F2x114 Register Definition ****
+// Address
+#define D18F2x114_ADDRESS 0x114
+// Type
+#define D18F2x114_TYPE TYPE_D18F2
+
+// **** DxFxx18 Register Definition ****
+// Address
+#define DxFxx18_ADDRESS 0x18
+// Type
+#define DxFxx18_TYPE TYPE_D2F1
+
+// **** DxFxx20 Register Definition ****
+// Address
+#define DxFxx20_ADDRESS 0x20
+// Type
+#define DxFxx20_TYPE TYPE_D2F1
+
+// **** DxFxx24 Register Definition ****
+// Address
+#define DxFxx24_ADDRESS 0x24
+// Type
+#define DxFxx24_TYPE TYPE_D2F1
+
+// **** D0F0x60 Register Definition ****
+// Address
+#define D0F0x60_ADDRESS 0x60
+// Type
+#define D0F0x60_TYPE TYPE_D0F0
+
+// **** D0F0xB8 Register Definition ****
+// Address
+#define D0F0xB8_ADDRESS 0xB8
+// Type
+#define D0F0xB8_TYPE TYPE_D0F0
+
+// **** D0F0xE0 Register Definition ****
+// Address
+#define D0F0xE0_ADDRESS 0xE0
+// Type
+#define D0F0xE0_TYPE TYPE_D0F0
+// **** D0F0x64_x1F Register Definition ****
+// Address
+#define D0F0x64_x1F_ADDRESS 0x1F
+// Type
+#define D0F0x64_x1F_TYPE TYPE_D0F0x64
+
+// **** D0F0xE4_PIF_0017 Register Definition ****
+// Address
+#define D0F0xE4_PIF_0017_ADDRESS 0x17
+// Type
+#define D0F0xE4_PIF_0017_TYPE TYPE_D0F0xE4
+
+// **** D0F2xF4_x49 Register Definition ****
+// Address
+// Type
+
+
+// **** D0F0xE4_WRAP_8021 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8021_ADDRESS 0x8021
+// Type
+#define D0F0xE4_WRAP_8021_TYPE TYPE_D0F0xE4
+
+// **** D0F0xE4_WRAP_8022 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8022_ADDRESS 0x8022
+// Type
+#define D0F0xE4_WRAP_8022_TYPE TYPE_D0F0xE4
+
+// **** D0F0xE4_WRAP_8025 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8025_ADDRESS 0x8025
+// Type
+#define D0F0xE4_WRAP_8025_TYPE TYPE_D0F0xE4
+
+// **** D0F0xE4_WRAP_8026 Register Definition ****
+// Address
+#define D0F0xE4_WRAP_8026_ADDRESS 0x8026
+// Type
+#define D0F0xE4_WRAP_8026_TYPE TYPE_D0F0xE4
+
+// **** D0F0xF8 Register Definition ****
+// Address
+#define D0F0xF8_ADDRESS 0xF8
+// Type
+#define D0F0xF8_TYPE TYPE_D0F0
+
+// **** D0F0x64_x19 Register Definition ****
+// Address
+#define D0F0x64_x19_ADDRESS 0x19
+// Type
+#define D0F0x64_x19_TYPE TYPE_D0F0x64
+
+// **** D0F0x64_x1A Register Definition ****
+// Address
+#define D0F0x64_x1A_ADDRESS 0x1A
+// Type
+#define D0F0x64_x1A_TYPE TYPE_D0F0x64
+
+// **** D0F0xBC_x20000 Register Definition ****
+// Address
+#define D0F0xBC_x20000_ADDRESS 0x20000
+// Type
+#define D0F0xBC_x20000_TYPE TYPE_D0F0xBC
+
+// **** D0F0xBC_x0 Register Definition ****
+// Address
+#define D0F0xBC_x0_ADDRESS 0x0
+// Type
+#define D0F0xBC_x0_TYPE TYPE_D0F0xBC
+
+
+
+// **** D0F0xBC_xC210003C Register Definition ****
+// Address
+#define D0F0xBC_xC210003C_ADDRESS 0xC210003C
+// Type
+#define D0F0xBC_xC210003C_TYPE TYPE_D0F0xBC
+
+// **** D0F0xD4_x010914C3 Register Definition ****
+// Address
+#define D0F0xD4_x010914C3_ADDRESS 0x010914C3
+// Type
+#define D0F0xD4_x010914C3_TYPE TYPE_D0F0xD4
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbUra.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbUra.h
new file mode 100644
index 0000000..2bf8952
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbUra.h
@@ -0,0 +1,204 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access PCI config space registers
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85947 $ @e \$Date: 2013-01-14 17:25:21 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBURA_H_
+#define _GNBURA_H_
+
+#include "GnbPcie.h"
+
+/// Generic device object
+typedef struct {
+ PCI_ADDR DevPciAddress; ///< DevPciAddress
+ GNB_HANDLE *GnbHandle; ///< GnbHandle
+ AMD_CONFIG_PARAMS *StdHeader; ///<
+} DEV_OBJECT;
+
+/// Register address 32 bit encoding
+typedef struct {
+ UINT32 Address: 31; ///< Register address
+ UINT32 MultInst: 1; ///< Must equals to 0
+} URA_REGISTER_32B_ENTRY;
+
+/// Register address encoding that represents a group of registers that have same fields' definitions
+typedef struct {
+ UINT32 Addr: 24; ///< Register address
+ UINT32 InstOffset: 7; ///< The address offset between register instances
+ UINT32 MultInst: 1; ///< Must equals to 1
+} URA_MULT_REG_ENTRY;
+
+/// 16 bit field encoding
+typedef struct {
+ UINT16 BfOffset: 6; ///< Offset of the bit field
+ UINT16 BfWidth: 6; ///< Width of the bit field
+ UINT16 Offset: 4; ///< Number of field entries from its register address entry
+ ///< The first field entry of a register must be place right after its register entry and has offset 1.
+ ///< The second field is placed right after the first field and has offset 2 and so on.
+ ///< The offset field is maxed out at 15. So any entries after the 15th entries will take offset 0.
+} URA_FIELD_16B_ENTRY;
+
+/// 32 bit field encoding
+typedef struct {
+ UINT32 BfOffset: 6; ///< Offset of the bit field
+ UINT32 BfWidth: 6; ///< Width of the bit field
+ UINT32 RegIndex: 13; ///< Direct index to its register address entry
+ UINT32 Rev: 6; ///< Contains ID of the family/rev that this bit field is valid
+ UINT32 Reserved: 1; ///< Reserved
+} URA_FIELD_32B_ENTRY;
+
+/// Register address 64 bit encoding
+typedef struct {
+ UINT64 DomainAddress:32; ///< Register domain address
+ UINT64 DomainType: 8; ///< Register domain type
+ UINT64 Reserved: 24; ///< Reserved
+} URA_REGISTER_64B_ENTRY;
+
+/// Register / Field table entry
+#define URA_ENTRY UINT16
+
+/// Token
+typedef union {
+ UINT32 Encode; ///< Token value
+
+ struct { ///< Sub structure used to parse Token
+ UINT32 Index: 13; ///< Index into a specific register or field entry in register/field table
+ UINT32 Type: 3; ///< Entry type:
+ ///< 000b: 16-bit field location encoding
+ ///< 001b: Register address encoding
+ ///< 010b: 32-bit field location encoding
+ ///< 011b: 64-bit field location encoding
+ ///< Others would reserved
+ UINT32 Selector: 6; ///< Used by unified register access to select the access method
+ UINT32 InstSel: 6; ///< When register/field has multiple instances, this field is used to obtain the register address of a register group.
+ UINT32 S3Save:1; ///< Indicate whether S3Save is needed.
+ UINT32 StreamSet:1; ///< Stream Set
+ UINT32 ParentType:1; ///< Parent token type
+ UINT32 Reserved: 1; ///< Reserved for device specific usage
+ } Parser;
+} URA_TOKEN_STRUCT;
+
+#define URA_TOKEN UINT32
+
+#define URA_TYPE_FIELD_16 0
+#define URA_TYPE_FIELD_32 1
+#define URA_TYPE_REGISTER_32 2
+#define URA_TYPE_REGISTER_64 3
+
+#define URA_TOKEN_PARENT_TYPE_32 0x20000000ul
+#define URA_TOKEN_PARENT_TYPE_64 0x00000000ul
+
+/**
+ TOKEN_DEF(Index, Type, Selector)
+ Defines a register of field token
+
+ @param[in] Index
+ @param[in] Type
+ @param[in] Selector
+ @param[in] ParentType
+
+ @return URA_TOKEN Encrypted URA_TOKEN format
+--*/
+#define TOKEN_DEF(Index, Type, Selector, ParentType) ( \
+ (((UINT32) (Index)) | (((UINT32) (Type)) << 13) | (((UINT32) (Selector)) << 16) | ((UINT32) (ParentType))) \
+ )
+
+#define _RESERVED 0xFFFFFFFFul
+#define _UNUSED 0xFEFEFEFEul
+#define GNB_URA_FLAG_S3SAVE 0x00000001ul
+#define GNB_URA_STREAM_SET 0x20000000ul
+
+/// Structure used to pass token info to access methods
+typedef struct {
+ UINT32 RegAddress; ///< Register address
+ UINT8 BfOffset; ///< Offset of the bit field
+ UINT8 BfWidth; ///< Width of the bit field
+ BOOLEAN WholeRegAccess; ///< Whole register access
+ UINT32 MethodType; ///< Index into the access method table to select access method
+ UINT32 Flags; ///< S3
+ UINT32 StreamSet; ///< StreamSet
+ UINT8 RegDomainType; ///< Register Domain type
+} URA_TOKEN_INFO;
+
+#define TYPE_GNB_INDIRECT_ACCESS 0
+#define TYPE_GNB_PROTOCOL_ACCESS 1
+
+/// URA_TUPLE
+typedef struct {
+ URA_TOKEN Token; ///< Token
+ UINT32 Value; ///< Token value
+ UINT32 StepLength; ///< Byte length to next address for stream set usage.
+} URA_TUPLE;
+
+typedef VOID F_GNBURASERVICELOCATEREGTBL (
+ IN DEV_OBJECT *Device,
+ IN UINT32 *UraTableAddress
+ );
+
+typedef VOID F_GNBURASERVICEGET (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN_INFO *UraTokenInfo,
+ IN OUT VOID *Value
+ );
+
+typedef VOID F_GNBURASERVICESET (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN_INFO *UraTokenInfo,
+ IN OUT VOID *Value
+ );
+
+typedef VOID F_GNBURASERVICESTREAMSET (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN_INFO *UraTokenInfo,
+ IN OUT URA_TUPLE *UraTuple,
+ IN UINT32 CombinedCount
+ );
+
+/// Register Read/Write protocol
+typedef struct {
+ F_GNBURASERVICELOCATEREGTBL *GnbUraLocateRegTbl; ///<
+ F_GNBURASERVICEGET *GnbUraGet; ///<
+ F_GNBURASERVICESET *GnbUraSet; ///<
+ F_GNBURASERVICESTREAMSET *GnbUraStreamSet; ///<
+} GNB_URA_SERVICE;
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbUraServices.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbUraServices.h
new file mode 100644
index 0000000..c4e51b0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbUraServices.h
@@ -0,0 +1,87 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access PCI config space registers
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBURASERVICES_H_
+#define _GNBURASERVICES_H_
+
+#include "GnbUra.h"
+#include "GnbUraToken.h"
+
+/*----------------------------------------------------------------------------
+ * FUNCTION PROTOTYPES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+GnbUraGet (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN UraToken,
+ IN OUT VOID *Value
+ );
+
+VOID
+GnbUraSet (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN UraToken,
+ IN VOID *Value
+ );
+
+VOID
+GnbUraCombinedGet (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN UraTokenRegister,
+ IN OUT URA_TUPLE *UraTuple,
+ IN UINT32 CombinedCount
+ );
+
+VOID
+GnbUraCombinedSet (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN UraTokenRegister,
+ IN OUT URA_TUPLE *UraTuple,
+ IN UINT32 CombinedCount
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbUraToken.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbUraToken.h
new file mode 100644
index 0000000..2968360
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Common/GnbUraToken.h
@@ -0,0 +1,103 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AGESA gnb file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+#ifndef _GNBURATOKEN_H_
+#define _GNBURATOKEN_H_
+
+/// Template structure for register/field table
+typedef struct {
+ URA_REGISTER_64B_ENTRY RxSmuIntReq;///<
+ URA_FIELD_16B_ENTRY BfxSmuIntToggle;///<
+ URA_FIELD_16B_ENTRY BfxSmuServiceIndex;///<
+ URA_REGISTER_64B_ENTRY RxSmuIntSts;///<
+ URA_FIELD_16B_ENTRY BfxSmuIntAck;///<
+ URA_FIELD_16B_ENTRY BfxSmuIntDone;///<
+ URA_REGISTER_64B_ENTRY RxSmuAuthSts;///<
+ URA_FIELD_16B_ENTRY BfxSmuAuthDone;///<
+ URA_FIELD_16B_ENTRY BfxSmuAuthPass;///<
+ URA_REGISTER_64B_ENTRY RxSmuFwAuth;///<
+ URA_FIELD_16B_ENTRY BfxSmuProtectedMode;///<
+ URA_REGISTER_64B_ENTRY REG_FIELD_TABLE_STRUCT_fld11;///<
+ URA_FIELD_16B_ENTRY BfxSmuBootSeqDone;///<
+ URA_REGISTER_64B_ENTRY RxSmuFwFlags;///<
+ URA_FIELD_16B_ENTRY BfxSmuInterruptsEnabled;///<
+ URA_REGISTER_64B_ENTRY RxSmuResetCntl;///<
+ URA_FIELD_16B_ENTRY BfxSmuRstReg;///<
+ URA_REGISTER_64B_ENTRY RxSmuClkCntl;///<
+ URA_FIELD_16B_ENTRY BfxSmuCkDisable;///<
+ URA_REGISTER_64B_ENTRY RxSmuAuthVector;///<
+ URA_REGISTER_64B_ENTRY RxSmuRamStartAddr;///<
+ URA_REGISTER_64B_ENTRY RxSmuRomStartAddr;///<
+ URA_REGISTER_64B_ENTRY RxSmuIntArgument;///<
+
+} REG_FIELD_TABLE_STRUCT;
+
+#define IDX_CALC(VarName) (offsetof (REG_FIELD_TABLE_STRUCT, VarName) / 2) /* TODO: why ## */
+#define SEL_CALC(VarName) VarName
+#define FIELD_OFFSET(RegName, FieldName) ((((IDX_CALC(FieldName) - IDX_CALC(RegName) - 1) / 2) <= 15) ? ((IDX_CALC(FieldName) - IDX_CALC(RegName) - 1) / 2) : 0)
+
+#define TRxSmuIntReq TOKEN_DEF (IDX_CALC (RxSmuIntReq), URA_TYPE_REGISTER_64, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TBfxSmuIntToggle TOKEN_DEF (IDX_CALC (BfxSmuIntToggle), URA_TYPE_FIELD_16, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TBfxSmuServiceIndex TOKEN_DEF (IDX_CALC (BfxSmuServiceIndex), URA_TYPE_FIELD_16, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TRxSmuIntSts TOKEN_DEF (IDX_CALC (RxSmuIntSts), URA_TYPE_REGISTER_64, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TBfxSmuIntAck TOKEN_DEF (IDX_CALC (BfxSmuIntAck), URA_TYPE_FIELD_16, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TBfxSmuIntDone TOKEN_DEF (IDX_CALC (BfxSmuIntDone), URA_TYPE_FIELD_16, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TRxSmuAuthSts TOKEN_DEF (IDX_CALC (RxSmuAuthSts), URA_TYPE_REGISTER_64, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TBfxSmuAuthDone TOKEN_DEF (IDX_CALC (BfxSmuAuthDone), URA_TYPE_FIELD_16, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TBfxSmuAuthPass TOKEN_DEF (IDX_CALC (BfxSmuAuthPass), URA_TYPE_FIELD_16, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TRxSmuFwAuth TOKEN_DEF (IDX_CALC (RxSmuFwAuth), URA_TYPE_REGISTER_64, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TBfxSmuProtectedMode TOKEN_DEF (IDX_CALC (BfxSmuProtectedMode), URA_TYPE_FIELD_16, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TRxSmuRcuUcEvents TOKEN_DEF (IDX_CALC (REG_FIELD_TABLE_STRUCT_fld11), URA_TYPE_REGISTER_64, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TBfxSmuBootSeqDone TOKEN_DEF (IDX_CALC (BfxSmuBootSeqDone), URA_TYPE_FIELD_16, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TRxSmuFwFlags TOKEN_DEF (IDX_CALC (RxSmuFwFlags), URA_TYPE_REGISTER_64, SEL_CALC (TYPE_GNB_PROTOCOL_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TBfxSmuInterruptsEnabled TOKEN_DEF (IDX_CALC (BfxSmuInterruptsEnabled), URA_TYPE_FIELD_16, SEL_CALC (TYPE_GNB_PROTOCOL_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TRxSmuResetCntl TOKEN_DEF (IDX_CALC (RxSmuResetCntl), URA_TYPE_REGISTER_64, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TBfxSmuRstReg TOKEN_DEF (IDX_CALC (BfxSmuRstReg), URA_TYPE_FIELD_16, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TRxSmuClkCntl TOKEN_DEF (IDX_CALC (RxSmuClkCntl), URA_TYPE_REGISTER_64, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TBfxSmuCkDisable TOKEN_DEF (IDX_CALC (BfxSmuCkDisable), URA_TYPE_FIELD_16, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TRxSmuAuthVector TOKEN_DEF (IDX_CALC (RxSmuAuthVector), URA_TYPE_REGISTER_64, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TRxSmuRamStartAddr TOKEN_DEF (IDX_CALC (RxSmuRamStartAddr), URA_TYPE_REGISTER_64, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TRxSmuRomStartAddr TOKEN_DEF (IDX_CALC (RxSmuRomStartAddr), URA_TYPE_REGISTER_64, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+#define TRxSmuIntArgument TOKEN_DEF (IDX_CALC (RxSmuIntArgument), URA_TYPE_REGISTER_64, SEL_CALC (TYPE_GNB_INDIRECT_ACCESS), URA_TOKEN_PARENT_TYPE_64)
+
+
+#endif
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtEarly.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtEarly.c
new file mode 100644
index 0000000..9b1d908
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtEarly.c
@@ -0,0 +1,128 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB early init interface
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "OptionGnb.h"
+#include "GnbLibFeatures.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_GNBINITATEARLY_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_GNB_CONFIGURATION GnbEarlyFeatureTable[];
+extern OPTION_GNB_CONFIGURATION GnbEarlierFeatureTable[];
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+GnbInitAtEarly (
+ IN OUT AMD_EARLY_PARAMS *EarlyParamsPtr
+ );
+
+AGESA_STATUS
+GnbInitAtEarlier (
+ IN OUT AMD_EARLY_PARAMS *EarlyParamsPtr
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Early
+ *
+ *
+ *
+ * @param[in,out] EarlyParamsPtr Pointer to early configuration params.
+ * @retval Initialization status.
+ */
+AGESA_STATUS
+GnbInitAtEarly (
+ IN OUT AMD_EARLY_PARAMS *EarlyParamsPtr
+ )
+{
+ AGESA_STATUS Status;
+ Status = GnbLibDispatchFeatures (&GnbEarlyFeatureTable[0], &EarlyParamsPtr->StdHeader);
+ return Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Early before CPU
+ *
+ *
+ *
+ * @param[in,out] EarlyParamsPtr Pointer to early configuration params.
+ * @retval Initialization status.
+ */
+AGESA_STATUS
+GnbInitAtEarlier (
+ IN OUT AMD_EARLY_PARAMS *EarlyParamsPtr
+ )
+{
+ AGESA_STATUS Status;
+
+ // Only run code on BSP
+ if (IsBsp (&EarlyParamsPtr->StdHeader, &Status)) {
+ Status = GnbLibDispatchFeatures (&GnbEarlierFeatureTable[0], &EarlyParamsPtr->StdHeader);
+ }
+
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtEnv.c
new file mode 100644
index 0000000..7b93e91
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtEnv.c
@@ -0,0 +1,138 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB env init interface
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "OptionGnb.h"
+#include "GnbLibFeatures.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_GNBINITATENV_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_GNB_CONFIGURATION GnbEnvFeatureTable[];
+extern BUILD_OPT_CFG UserOptions;
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GnbInitDataStructAtEnvDef (
+ IN OUT GNB_ENV_CONFIGURATION *GnbEnvConfigPtr,
+ IN AMD_ENV_PARAMS *EnvParamsPtr
+ );
+
+AGESA_STATUS
+GnbInitAtEnv (
+ IN AMD_ENV_PARAMS *EnvParamsPtr
+ );
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Default constructor of GNB configuration at Env
+ *
+ *
+ *
+ * @param[in] GnbEnvConfigPtr Pointer to gnb env configuration params.
+ * @param[in] EnvParamsPtr Pointer to env configuration params.
+ */
+VOID
+GnbInitDataStructAtEnvDef (
+ IN OUT GNB_ENV_CONFIGURATION *GnbEnvConfigPtr,
+ IN AMD_ENV_PARAMS *EnvParamsPtr
+ )
+{
+ GnbEnvConfigPtr->Gnb3dStereoPinIndex = UserOptions.CfgGnb3dStereoPinIndex;
+ GnbEnvConfigPtr->IommuSupport = UserOptions.CfgIommuSupport;
+ GnbEnvConfigPtr->LvdsSpreadSpectrum = UserOptions.CfgLvdsSpreadSpectrum;
+ GnbEnvConfigPtr->LvdsSpreadSpectrumRate = UserOptions.CfgLvdsSpreadSpectrumRate;
+ GnbEnvConfigPtr->LvdsPowerOnSeqDigonToDe = UserOptions.CfgLvdsPowerOnSeqDigonToDe;
+ GnbEnvConfigPtr->LvdsPowerOnSeqDeToVaryBl = UserOptions.CfgLvdsPowerOnSeqDeToVaryBl;
+ GnbEnvConfigPtr->LvdsPowerOnSeqDeToDigon = UserOptions.CfgLvdsPowerOnSeqDeToDigon;
+ GnbEnvConfigPtr->LvdsPowerOnSeqVaryBlToDe = UserOptions.CfgLvdsPowerOnSeqVaryBlToDe;
+ GnbEnvConfigPtr->LvdsPowerOnSeqOnToOffDelay = UserOptions.CfgLvdsPowerOnSeqOnToOffDelay;
+ GnbEnvConfigPtr->LvdsPowerOnSeqVaryBlToBlon = UserOptions.CfgLvdsPowerOnSeqVaryBlToBlon;
+ GnbEnvConfigPtr->LvdsPowerOnSeqBlonToVaryBl = UserOptions.CfgLvdsPowerOnSeqBlonToVaryBl;
+ GnbEnvConfigPtr->LvdsMaxPixelClockFreq = UserOptions.CfgLvdsMaxPixelClockFreq;
+ GnbEnvConfigPtr->LcdBitDepthControlValue = UserOptions.CfgLcdBitDepthControlValue;
+ GnbEnvConfigPtr->Lvds24bbpPanelMode = UserOptions.CfgLvds24bbpPanelMode;
+ GnbEnvConfigPtr->LvdsMiscControl.Value = 0;
+ GnbEnvConfigPtr->LvdsMiscControl.Value = UserOptions.CfgLvdsMiscControl.Value;
+ GnbEnvConfigPtr->PcieRefClkSpreadSpectrum = UserOptions.CfgPcieRefClkSpreadSpectrum;
+ GnbEnvConfigPtr->GnbRemoteDisplaySupport = UserOptions.CfgGnbRemoteDisplaySupport;
+ GnbEnvConfigPtr->LvdsMiscVoltAdjustment = UserOptions.CfgLvdsMiscVoltAdjustment;
+ GnbEnvConfigPtr->DisplayMiscControl.Value = UserOptions.CfgDisplayMiscControl.Value;
+ GnbEnvConfigPtr->DpFixedVoltSwingType = UserOptions.CfgDpFixedVoltSwingType;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Env
+ *
+ *
+ *
+ * @param[in] EnvParamsPtr Pointer to env configuration params.
+ * @retval Initialization status.
+ */
+
+AGESA_STATUS
+GnbInitAtEnv (
+ IN AMD_ENV_PARAMS *EnvParamsPtr
+ )
+{
+ AGESA_STATUS Status;
+ Status = GnbLibDispatchFeatures (&GnbEnvFeatureTable[0], &EnvParamsPtr->StdHeader);
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtLate.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtLate.c
new file mode 100644
index 0000000..c45e10a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtLate.c
@@ -0,0 +1,136 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB late init interface
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85198 $ @e \$Date: 2013-01-03 13:49:32 -0600 (Thu, 03 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "OptionGnb.h"
+#include "GnbLibFeatures.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_GNBINITATLATE_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern OPTION_GNB_CONFIGURATION GnbLateFeatureTable[];
+extern BUILD_OPT_CFG UserOptions;
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GnbInitDataStructAtLateDef (
+ IN OUT GNB_LATE_CONFIGURATION *GnbLateConfigPtr,
+ IN AMD_LATE_PARAMS *LateParamsPtr
+ );
+
+AGESA_STATUS
+GnbInitAtLate (
+ IN OUT AMD_LATE_PARAMS *LateParamsPtr
+ );
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Default constructor of GNB configuration at Late
+ *
+ *
+ *
+ * @param[in] GnbLateConfigPtr Pointer to gnb Late configuration params.
+ * @param[in] LateParamsPtr Pointer to Late configuration params.
+ */
+VOID
+GnbInitDataStructAtLateDef (
+ IN OUT GNB_LATE_CONFIGURATION *GnbLateConfigPtr,
+ IN AMD_LATE_PARAMS *LateParamsPtr
+ )
+{
+ UINT32 Property;
+
+ Property = TABLE_PROPERTY_DEFAULT;
+ Property |= GnbBuildOptions.CfgBapmSupport ? TABLE_PROPERTY_BAPM : 0;
+
+ IDS_OPTION_HOOK (IDS_GNB_PROPERTY, &Property,
+ (AMD_CONFIG_PARAMS *)&LateParamsPtr->StdHeader);
+
+ GnbLateConfigPtr->DockedTdpHeadroom = FALSE;
+ if ((Property & TABLE_PROPERTY_BAPM) && UserOptions.CfgDockedTdpHeadroom) {
+ GnbLateConfigPtr->DockedTdpHeadroom = TRUE;
+ }
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Late post
+ *
+ *
+ *
+ * @param[in,out] LateParamsPtr Pointer to late configuration params.
+ * @retval Initialization status.
+ */
+
+AGESA_STATUS
+GnbInitAtLate (
+ IN OUT AMD_LATE_PARAMS *LateParamsPtr
+ )
+{
+ AGESA_STATUS Status;
+ Status = GnbLibDispatchFeatures (&GnbLateFeatureTable[0], &LateParamsPtr->StdHeader);
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtMid.c
new file mode 100644
index 0000000..f786d77
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtMid.c
@@ -0,0 +1,118 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB mid init interface
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "OptionGnb.h"
+#include "GnbLibFeatures.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_GNBINITATMID_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_GNB_CONFIGURATION GnbMidFeatureTable[];
+extern BUILD_OPT_CFG UserOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GnbInitDataStructAtMidDef (
+ IN OUT GNB_MID_CONFIGURATION *GnbMidConfigPtr,
+ IN AMD_MID_PARAMS *MidParamsPtr
+ );
+
+AGESA_STATUS
+GnbInitAtMid (
+ IN OUT AMD_MID_PARAMS *MidParamsPtr
+ );
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Default constructor of GNB configuration at Mid
+ *
+ *
+ *
+ * @param[in] GnbMidConfigPtr Pointer to gnb Mid configuration params.
+ * @param[in] MidParamsPtr Pointer to Mid configuration params.
+ */
+VOID
+GnbInitDataStructAtMidDef (
+ IN OUT GNB_MID_CONFIGURATION *GnbMidConfigPtr,
+ IN AMD_MID_PARAMS *MidParamsPtr
+ )
+{
+ GnbMidConfigPtr->GnbIoapicAddress = UserOptions.CfgGnbIoapicAddress;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Mid post
+ *
+ *
+ *
+ * @param[in,out] MidParamsPtr Pointer to mid configuration params.
+ * @retval Initialization status.
+ */
+
+AGESA_STATUS
+GnbInitAtMid (
+ IN OUT AMD_MID_PARAMS *MidParamsPtr
+ )
+{
+ AGESA_STATUS Status;
+ Status = GnbLibDispatchFeatures (&GnbMidFeatureTable[0], &MidParamsPtr->StdHeader);
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtPost.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtPost.c
new file mode 100644
index 0000000..6c5c7a1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtPost.c
@@ -0,0 +1,150 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB POST init interface
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "OptionGnb.h"
+#include "GnbLibFeatures.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_GNBINITATPOST_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern OPTION_GNB_CONFIGURATION GnbPostFeatureTable[];
+extern OPTION_GNB_CONFIGURATION GnbPostAfterDramFeatureTable[];
+extern BUILD_OPT_CFG UserOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GnbInitDataStructAtPostDef (
+ IN OUT GNB_POST_CONFIGURATION *GnbPostConfigPtr,
+ IN AMD_POST_PARAMS *PostParamsPtr
+ );
+
+AGESA_STATUS
+GnbInitAtPost (
+ IN OUT AMD_POST_PARAMS *PostParamsPtr
+ );
+
+AGESA_STATUS
+GnbInitAtPostAfterDram (
+ IN OUT AMD_POST_PARAMS *PostParamsPtr
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Default constructor of GNB configuration at Env
+ *
+ *
+ *
+ * @param[in] GnbPostConfigPtr Pointer to GNB POST configuration params.
+ * @param[in] PostParamsPtr Pointer to POST configuration params.
+ */
+VOID
+GnbInitDataStructAtPostDef (
+ IN OUT GNB_POST_CONFIGURATION *GnbPostConfigPtr,
+ IN AMD_POST_PARAMS *PostParamsPtr
+ )
+{
+ GnbPostConfigPtr->IgpuEnableDisablePolicy = UserOptions.CfgIgpuEnableDisablePolicy;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Post
+ *
+ *
+ *
+ * @param[in] PostParamsPtr Pointer to post configuration parameters
+ * @retval Initialization status.
+ */
+
+AGESA_STATUS
+GnbInitAtPost (
+ IN OUT AMD_POST_PARAMS *PostParamsPtr
+ )
+{
+ AGESA_STATUS Status;
+ Status = GnbLibDispatchFeatures (&GnbPostFeatureTable[0], &PostParamsPtr->StdHeader);
+ return Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Post after DRAM init
+ *
+ *
+ *
+ * @param[in] PostParamsPtr Pointer to post configuration parameters
+ * @retval Initialization status.
+ */
+
+AGESA_STATUS
+GnbInitAtPostAfterDram (
+ IN OUT AMD_POST_PARAMS *PostParamsPtr
+ )
+{
+ AGESA_STATUS Status;
+ Status = GnbLibDispatchFeatures (&GnbPostAfterDramFeatureTable[0], &PostParamsPtr->StdHeader);
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtReset.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtReset.c
new file mode 100644
index 0000000..e60e18b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtReset.c
@@ -0,0 +1,93 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB reset init interface
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_GNBINITATRESET_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GnbInitAtReset (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at Reset
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GnbInitAtReset (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ Status = AGESA_SUCCESS;
+
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtS3Save.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtS3Save.c
new file mode 100644
index 0000000..2201ff6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/GnbInitAtS3Save.c
@@ -0,0 +1,94 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB late init interface
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "OptionGnb.h"
+#include "GnbLibFeatures.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_GNBINITATS3SAVE_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern OPTION_GNB_CONFIGURATION GnbS3SaveFeatureTable[];
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GnbInitAtS3Save (
+ IN OUT AMD_S3SAVE_PARAMS *AmdS3SaveParams
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GNB at S3 save
+ *
+ *
+ *
+ * @param[in,out] AmdS3SaveParams Pointer to AMD_S3SAVE_PARAMS.
+ * @retval Initialization status.
+ */
+
+AGESA_STATUS
+GnbInitAtS3Save (
+ IN OUT AMD_S3SAVE_PARAMS *AmdS3SaveParams
+ )
+{
+ AGESA_STATUS Status;
+ Status = GnbLibDispatchFeatures (&GnbS3SaveFeatureTable[0], &AmdS3SaveParams->StdHeader);
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbCommonLib.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbCommonLib.h
new file mode 100644
index 0000000..af2ff52
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbCommonLib.h
@@ -0,0 +1,57 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB register access services.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 86079 $ @e \$Date: 2013-01-16 00:59:04 -0600 (Wed, 16 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBCOMMONLIB_H_
+#define _GNBCOMMONLIB_H_
+
+#include "GnbLib.h"
+#include "GnbLibCpuAcc.h"
+#include "GnbLibHeap.h"
+#include "GnbLibIoAcc.h"
+#include "GnbLibMemAcc.h"
+#include "GnbLibPci.h"
+#include "GnbLibPciAcc.h"
+#include "GnbTimerLib.h"
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLib.c
new file mode 100644
index 0000000..34990c5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLib.c
@@ -0,0 +1,530 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB register access services.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85947 $ @e \$Date: 2013-01-14 17:25:21 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuServices.h"
+#include "Gnb.h"
+#include "GnbLib.h"
+#include "GnbLibIoAcc.h"
+#include "GnbLibPciAcc.h"
+#include "GnbLibMemAcc.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern GNB_SERVICE *ServiceTable;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GnbLibPciIndirectReadField (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ OUT UINT32 *Value,
+ IN VOID *Config
+ );
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read GNB indirect registers
+ *
+ *
+ *
+ * @param[in] Address PCI address of indirect register
+ * @param[in] IndirectAddress Offset of indirect register
+ * @param[in] Width Width
+ * @param[out] Value Pointer to value
+ * @param[in] Config Pointer to standard header
+ */
+VOID
+GnbLibPciIndirectRead (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN ACCESS_WIDTH Width,
+ OUT VOID *Value,
+ IN VOID *Config
+ )
+{
+ UINT32 IndexOffset;
+ IndexOffset = LibAmdAccessWidth (Width);
+ GnbLibPciWrite (Address, Width, &IndirectAddress, Config);
+ GnbLibPciRead (Address + IndexOffset, Width, Value, Config);
+}
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read GNB indirect registers field
+ *
+ *
+ *
+ * @param[in] Address PCI address of indirect register
+ * @param[in] IndirectAddress Offset of indirect register
+ * @param[in] FieldOffset Field offset
+ * @param[in] FieldWidth Field width
+ * @param[out] Value Pointer to value
+ * @param[in] Config Pointer to standard header
+ */
+VOID
+GnbLibPciIndirectReadField (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ OUT UINT32 *Value,
+ IN VOID *Config
+ )
+{
+ UINT32 Mask;
+ GnbLibPciIndirectRead (Address, IndirectAddress, AccessWidth32, Value, Config);
+ Mask = (1 << FieldWidth) - 1;
+ *Value = (*Value >> FieldOffset) & Mask;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write GNB indirect registers
+ *
+ *
+ *
+ * @param[in] Address PCI address of indirect register
+ * @param[in] IndirectAddress Offset of indirect register
+ * @param[in] Width Width
+ * @param[in] Value Pointer to value
+ * @param[in] Config Pointer to standard header
+ */
+
+VOID
+GnbLibPciIndirectWrite (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN ACCESS_WIDTH Width,
+ IN VOID *Value,
+ IN VOID *Config
+ )
+{
+ UINT32 IndexOffset;
+ IndexOffset = LibAmdAccessWidth (Width);
+ GnbLibPciWrite (Address, Width, &IndirectAddress, Config);
+ GnbLibPciWrite (Address + IndexOffset, Width, Value, Config);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write GNB indirect registers field
+ *
+ *
+ *
+ * @param[in] Address PCI address of indirect register
+ * @param[in] IndirectAddress Offset of indirect register
+ * @param[in] FieldOffset Field offset
+ * @param[in] FieldWidth Field width
+ * @param[in] Value Pointer to value
+ * @param[in] S3Save Save for S3 (TRUE/FALSE)
+ * @param[in] Config Pointer to standard header
+ */
+VOID
+GnbLibPciIndirectWriteField (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN VOID *Config
+ )
+{
+ UINT32 Data;
+ UINT32 Mask;
+ GnbLibPciIndirectRead (Address, IndirectAddress, AccessWidth32, &Data, Config);
+ Mask = (1 << FieldWidth) - 1;
+ Data &= (~(Mask << FieldOffset));
+ Data |= ((Value & Mask) << FieldOffset);
+ GnbLibPciIndirectWrite (Address, IndirectAddress, S3Save ? AccessS3SaveWidth32 : AccessWidth32, &Data, Config);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read/Modify/Write GNB indirect registers field
+ *
+ *
+ *
+ * @param[in] Address PCI address of indirect register
+ * @param[in] IndirectAddress Offset of indirect register
+ * @param[in] Width Width
+ * @param[in] Mask And Mask
+ * @param[in] Value Or Value
+ * @param[in] Config Pointer to standard header
+ */
+VOID
+GnbLibPciIndirectRMW (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN ACCESS_WIDTH Width,
+ IN UINT32 Mask,
+ IN UINT32 Value,
+ IN VOID *Config
+ )
+{
+ UINT32 Data;
+ GnbLibPciIndirectRead (
+ Address,
+ IndirectAddress,
+ (Width >= AccessS3SaveWidth8) ? (Width - (AccessS3SaveWidth8 - AccessWidth8)) : Width,
+ &Data,
+ Config
+ );
+ Data = (Data & Mask) | Value;
+ GnbLibPciIndirectWrite (Address, IndirectAddress, Width, &Data, Config);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read/Modify/Write PCI registers
+ *
+ *
+ *
+ * @param[in] Address PCI address
+ * @param[in] Width Access width
+ * @param[in] Mask AND Mask
+ * @param[in] Value OR Value
+ * @param[in] Config Pointer to standard header
+ */
+VOID
+GnbLibPciRMW (
+ IN UINT32 Address,
+ IN ACCESS_WIDTH Width,
+ IN UINT32 Mask,
+ IN UINT32 Value,
+ IN VOID *Config
+ )
+{
+ UINT32 Data;
+ GnbLibPciRead (Address, Width, &Data, Config);
+ Data = (Data & Mask) | Value;
+ GnbLibPciWrite (Address, Width, &Data, Config);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read/Modify/Write I/O registers
+ *
+ *
+ *
+ * @param[in] Address I/O Port
+ * @param[in] Width Access width
+ * @param[in] Mask AND Mask
+ * @param[in] Value OR Mask
+ * @param[in] Config Pointer to standard header
+ */
+VOID
+GnbLibIoRMW (
+ IN UINT16 Address,
+ IN ACCESS_WIDTH Width,
+ IN UINT32 Mask,
+ IN UINT32 Value,
+ IN VOID *Config
+ )
+{
+ UINT32 Data;
+ GnbLibIoRead (Address, Width, &Data, Config);
+ Data = (Data & Mask) | Value;
+ GnbLibIoWrite (Address, Width, &Data, Config);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Indirect IO block read
+ *
+ *
+ *
+ * @param[in] IndexPort Index Port
+ * @param[in] DataPort Data Port
+ * @param[in] Width Access width
+ * @param[in] IndexAddress Index Address
+ * @param[in] Count Count
+ * @param[in] Buffer Buffer
+ * @param[in] Config Pointer to standard header
+ */
+VOID
+GnbLibIndirectIoBlockRead (
+ IN UINT16 IndexPort,
+ IN UINT16 DataPort,
+ IN ACCESS_WIDTH Width,
+ IN UINT32 IndexAddress,
+ IN UINT32 Count,
+ IN VOID *Buffer,
+ IN VOID *Config
+ )
+{
+ UINT32 Index;
+ Index = IndexAddress;
+ for (; Index < (IndexAddress + Count); Index++) {
+ GnbLibIoWrite (IndexPort, Width, &Index, Config);
+ GnbLibIoRead (DataPort, Width, Buffer, Config);
+ Buffer = (VOID *) ((UINT8 *) Buffer + LibAmdAccessWidth (Width));
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get IOAPIC ID
+ *
+ *
+ *
+ * @param[in] IoApicBaseAddress IO APIC base address
+ * @param[in] Config Pointer to standard header
+ */
+UINT8
+GnbLiGetIoapicId (
+ IN UINT64 IoApicBaseAddress,
+ IN VOID *Config
+ )
+{
+ UINT32 Value;
+ Value = 0x0;
+ GnbLibMemWrite (IoApicBaseAddress, AccessWidth32, &Value, Config);
+ GnbLibMemRead (IoApicBaseAddress + 0x10, AccessWidth32, &Value, Config);
+ return (UINT8) (Value >> 24);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read/Modify/Write MMIO registers
+ *
+ *
+ *
+ * @param[in] Address Physical address
+ * @param[in] Width Access width
+ * @param[in] Mask AND Mask
+ * @param[in] Value OR Value
+ * @param[in] Config Pointer to standard header
+ */
+VOID
+GnbLibMemRMW (
+ IN UINT64 Address,
+ IN ACCESS_WIDTH Width,
+ IN UINT32 Mask,
+ IN UINT32 Value,
+ IN VOID *Config
+ )
+{
+ UINT32 Data;
+ GnbLibMemRead (Address, Width, &Data, Config);
+ Data = (Data & Mask) | Value;
+ GnbLibMemWrite (Address, Width, &Data, Config);
+}
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Calculate power of number
+ *
+ *
+ *
+ * @param[in] Value Number
+ * @param[in] Power Power
+ */
+
+UINT32
+GnbLibPowerOf (
+ IN UINT32 Value,
+ IN UINT32 Power
+ )
+{
+ UINT32 Result;
+ if (Power == 0) {
+ return 1;
+ }
+ Result = Value;
+ while ((--Power) > 0) {
+ Result *= Value;
+ }
+ return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Search buffer for pattern
+ *
+ *
+ * @param[in] Buf1 Pointer to source buffer which will be subject of search
+ * @param[in] Buf1Length Length of the source buffer
+ * @param[in] Buf2 Pointer to pattern buffer
+ * @param[in] Buf2Length Length of the pattern buffer
+ * @retval Pointer on first occurrence of Buf2 in Buf1 or NULL
+ */
+
+VOID*
+GnbLibFind (
+ IN UINT8 *Buf1,
+ IN UINTN Buf1Length,
+ IN UINT8 *Buf2,
+ IN UINTN Buf2Length
+ )
+{
+ UINT8 *CurrentBuf1Ptr;
+ CurrentBuf1Ptr = Buf1;
+ while (CurrentBuf1Ptr < (Buf1 + Buf1Length - Buf2Length)) {
+ UINT8 *SourceBufPtr;
+ UINT8 *PatternBufPtr;
+ UINTN PatternBufLength;
+ SourceBufPtr = CurrentBuf1Ptr;
+ PatternBufPtr = Buf2;
+ PatternBufLength = Buf2Length;
+ while ((*SourceBufPtr++ == *PatternBufPtr++) && (PatternBufLength-- != 0));
+ if (PatternBufLength == 0) {
+ return CurrentBuf1Ptr;
+ }
+ CurrentBuf1Ptr++;
+ }
+ return NULL;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Dump buffer to HDTOUT
+ *
+ *
+ * @param[in] Buffer Buffer pointer
+ * @param[in] Count Count of data elements
+ * @param[in] DataWidth DataWidth 1 - Byte; 2 - Word; 3 - DWORD; 4 - QWORD
+ * @param[in] LineWidth Number of data item per line
+ */
+VOID
+GnbLibDebugDumpBuffer (
+ IN VOID *Buffer,
+ IN UINT32 Count,
+ IN UINT8 DataWidth,
+ IN UINT8 LineWidth
+ )
+{
+ UINT32 Index;
+ UINT32 DataItemCount;
+ ASSERT (LineWidth != 0);
+ ASSERT (DataWidth >= 1 && DataWidth <= 4);
+ DataItemCount = 0;
+ for (Index = 0; Index < Count; ) {
+ switch (DataWidth) {
+ case 1:
+ IDS_HDT_CONSOLE (GNB_TRACE, "%02x ", *((UINT8 *) Buffer + Index));
+ Index += 1;
+ break;
+ case 2:
+ IDS_HDT_CONSOLE (GNB_TRACE, "%04x ", *(UINT16 *) ((UINT8 *) Buffer + Index));
+ Index += 2;
+ break;
+ case 3:
+ IDS_HDT_CONSOLE (GNB_TRACE, "%08x ", *(UINT32 *) ((UINT8 *) Buffer + Index));
+ Index += 4;
+ break;
+ case 4:
+ IDS_HDT_CONSOLE (GNB_TRACE, "%08x%08", *(UINT32 *) ((UINT8 *) Buffer + Index), *(UINT32 *) ((UINT8 *) Buffer + Index + 4));
+ Index += 8;
+ break;
+ default:
+ IDS_HDT_CONSOLE (GNB_TRACE, "ERROR! Incorrect Data Width\n");
+ return;
+ }
+ if (++DataItemCount >= LineWidth) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "\n");
+ DataItemCount = 0;
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Dump buffer to HDTOUT
+ *
+ *
+ * @param[in] ServiceId Service ID
+ * @param[in] SocketId Socket ID
+ * @param[in] ServiceProtocol Service protocol
+ * @param[in] StdHeader Standard Configuration Header
+ */
+AGESA_STATUS
+GnbLibLocateService (
+ IN GNB_SERVICE_ID ServiceId,
+ IN UINT8 SocketId,
+ IN VOID **ServiceProtocol,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GNB_SERVICE *SeviceEntry;
+ CPU_LOGICAL_ID LogicalId;
+ SeviceEntry = ServiceTable;
+ GetLogicalIdOfSocket (SocketId, &LogicalId, StdHeader);
+ while (SeviceEntry != NULL) {
+ if (SeviceEntry->ServiceId == ServiceId && (LogicalId.Family & SeviceEntry->Family) != 0) {
+ *ServiceProtocol = SeviceEntry->ServiceProtocol;
+ return AGESA_SUCCESS;
+ }
+ SeviceEntry = SeviceEntry->NextService;
+ }
+ return AGESA_UNSUPPORTED;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLib.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLib.h
new file mode 100644
index 0000000..7e35615
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLib.h
@@ -0,0 +1,156 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB register access services.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBLIB_H_
+#define _GNBLIB_H_
+
+#define IOC_WRITE_ENABLE 0x80
+
+VOID
+GnbLibPciIndirectWrite (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN ACCESS_WIDTH Width,
+ IN VOID *Value,
+ IN VOID *Config
+ );
+
+VOID
+GnbLibPciIndirectRead (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN ACCESS_WIDTH Width,
+ OUT VOID *Value,
+ IN VOID *Config
+ );
+
+VOID
+GnbLibPciIndirectRMW (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN ACCESS_WIDTH Width,
+ IN UINT32 Mask,
+ IN UINT32 Value,
+ IN VOID *Config
+ );
+
+VOID
+GnbLibPciIndirectWriteField (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN VOID *Config
+ );
+
+
+VOID
+GnbLibPciRMW (
+ IN UINT32 Address,
+ IN ACCESS_WIDTH Width,
+ IN UINT32 Mask,
+ IN UINT32 Value,
+ IN VOID *Config
+ );
+
+VOID
+GnbLibIoRMW (
+ IN UINT16 Address,
+ IN ACCESS_WIDTH Width,
+ IN UINT32 Mask,
+ IN UINT32 Value,
+ IN VOID *Config
+ );
+
+
+UINT32
+GnbLibPowerOf (
+ IN UINT32 Value,
+ IN UINT32 Power
+ );
+
+VOID*
+GnbLibFind (
+ IN UINT8 *Buf1,
+ IN UINTN Buf1Length,
+ IN UINT8 *Buf2,
+ IN UINTN Buf2Length
+ );
+
+VOID
+GnbLibIndirectIoBlockRead (
+ IN UINT16 IndexPort,
+ IN UINT16 DataPort,
+ IN ACCESS_WIDTH Width,
+ IN UINT32 IndexAddress,
+ IN UINT32 Count,
+ IN VOID *Buffer,
+ IN VOID *Config
+ );
+
+UINT8
+GnbLiGetIoapicId (
+ IN UINT64 IoApicBaseAddress,
+ IN VOID *Config
+ );
+
+VOID
+GnbLibDebugDumpBuffer (
+ IN VOID *Buffer,
+ IN UINT32 Count,
+ IN UINT8 DataWidth,
+ IN UINT8 LineWidth
+ );
+
+AGESA_STATUS
+GnbLibLocateService (
+ IN GNB_SERVICE_ID ServiceId,
+ IN UINT8 SocketId,
+ IN VOID **ServiceProtocol,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibCpuAcc.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibCpuAcc.c
new file mode 100644
index 0000000..0430fba
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibCpuAcc.c
@@ -0,0 +1,143 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access various CPU registers.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "Porting.h"
+#include "AMD.h"
+#include "GnbLibPciAcc.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBCPUACC_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GnbLibCpuPciIndirectRead (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ OUT UINT32 *Value,
+ IN VOID *Config
+ );
+
+VOID
+GnbLibCpuPciIndirectWrite (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN UINT32 *Value,
+ IN VOID *Config
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read CPU (DCT) indirect registers
+ *
+ *
+ *
+ * @param[in] Address PCI address of DCT register
+ * @param[in] IndirectAddress Offset of DCT register
+ * @param[out] Value Pointer to value
+ * @param[in] Config Pointer to standard header
+ */
+VOID
+GnbLibCpuPciIndirectRead (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ OUT UINT32 *Value,
+ IN VOID *Config
+ )
+{
+ UINT32 OffsetRegisterValue;
+ GnbLibPciWrite (Address, AccessWidth32, &IndirectAddress, Config);
+ do {
+ GnbLibPciRead (Address , AccessWidth32, &OffsetRegisterValue, Config);
+ } while ((OffsetRegisterValue & BIT31) == 0);
+ GnbLibPciRead (Address + 4, AccessWidth32, Value, Config);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write CPU (DCT) indirect registers
+ *
+ *
+ *
+ * @param[in] Address PCI address of DCT register
+ * @param[in] IndirectAddress Offset of DCT register
+ * @param[in] Value Pointer to value
+ * @param[in] Config Pointer to standard header
+ */
+VOID
+GnbLibCpuPciIndirectWrite (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN UINT32 *Value,
+ IN VOID *Config
+ )
+{
+ UINT32 OffsetRegisterValue;
+ OffsetRegisterValue = IndirectAddress | BIT30;
+ GnbLibPciWrite (Address + 4, AccessWidth32, Value, Config);
+ GnbLibPciWrite (Address, AccessWidth32, &IndirectAddress, Config);
+ do {
+ GnbLibPciRead (Address , AccessWidth32, &OffsetRegisterValue, Config);
+ } while ((OffsetRegisterValue & BIT31) == 0);
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibCpuAcc.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibCpuAcc.h
new file mode 100644
index 0000000..f560b7b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibCpuAcc.h
@@ -0,0 +1,65 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access various CPU registers.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _CPUACCLIB_H_
+#define _CPUACCLIB_H_
+
+VOID
+GnbLibCpuPciIndirectWrite (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ IN UINT32 *Value,
+ IN VOID *Config
+ );
+
+VOID
+GnbLibCpuPciIndirectRead (
+ IN UINT32 Address,
+ IN UINT32 IndirectAddress,
+ OUT UINT32 *Value,
+ IN VOID *Config
+ );
+
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibHeap.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibHeap.c
new file mode 100644
index 0000000..91af4bb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibHeap.c
@@ -0,0 +1,176 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access heap.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "Porting.h"
+#include "AMD.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "GnbLibPciAcc.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBHEAP_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+VOID *
+GnbAllocateHeapBuffer (
+ IN UINT32 Handle,
+ IN UINTN Length,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID *
+GnbAllocateHeapBufferAndClear (
+ IN UINT32 Handle,
+ IN UINTN Length,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID *
+GnbLocateHeapBuffer (
+ IN UINT32 Handle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Allocates space for a new buffer in the heap
+ *
+ *
+ * @param[in] Handle Buffer handle
+ * @param[in] Length Buffer length
+ * @param[in] StdHeader Standard configuration header
+ *
+ * @retval NULL Buffer allocation fail
+ *
+ */
+
+VOID *
+GnbAllocateHeapBuffer (
+ IN UINT32 Handle,
+ IN UINTN Length,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ AllocHeapParams.RequestedBufferSize = (UINT32) Length;
+ AllocHeapParams.BufferHandle = Handle;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader);
+ if (Status != AGESA_SUCCESS) {
+ return NULL;
+ }
+ return AllocHeapParams.BufferPtr;
+}
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Allocates space for a new buffer in the heap and clear it
+ *
+ *
+ * @param[in] Handle Buffer handle
+ * @param[in] Length Buffer length
+ * @param[in] StdHeader Standard configuration header
+ *
+ * @retval NULL Buffer allocation fail
+ *
+ */
+
+VOID *
+GnbAllocateHeapBufferAndClear (
+ IN UINT32 Handle,
+ IN UINTN Length,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ VOID *Buffer;
+ Buffer = GnbAllocateHeapBuffer (Handle, Length, StdHeader);
+ if (Buffer != NULL) {
+ LibAmdMemFill (Buffer, 0x00, Length, StdHeader);
+ }
+ return Buffer;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Locates a previously allocated buffer on the heap.
+ *
+ *
+ * @param[in] Handle Buffer handle
+ * @param[in] StdHeader Standard configuration header
+ *
+ * @retval NULL Buffer handle not found
+ *
+ */
+
+VOID *
+GnbLocateHeapBuffer (
+ IN UINT32 Handle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ LOCATE_HEAP_PTR LocHeapParams;
+ LocHeapParams.BufferHandle = Handle;
+ Status = HeapLocateBuffer (&LocHeapParams, StdHeader);
+ if (Status != AGESA_SUCCESS) {
+ return NULL;
+ }
+ return LocHeapParams.BufferPtr;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibHeap.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibHeap.h
new file mode 100644
index 0000000..a751eee
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibHeap.h
@@ -0,0 +1,69 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access heap.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBHEAPLIB_H_
+#define _GNBHEAPLIB_H_
+
+VOID *
+GnbAllocateHeapBuffer (
+ IN UINT32 Handle,
+ IN UINTN Length,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID *
+GnbLocateHeapBuffer (
+ IN UINT32 Handle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID *
+GnbAllocateHeapBufferAndClear (
+ IN UINT32 Handle,
+ IN UINTN Length,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibIoAcc.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibIoAcc.c
new file mode 100644
index 0000000..4e4fa7a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibIoAcc.c
@@ -0,0 +1,122 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+* Service procedure to access I/O registers.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "Porting.h"
+#include "AMD.h"
+#include "amdlib.h"
+#include "GnbLibIoAcc.h"
+#include "S3SaveState.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBIOACC_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------------------*/
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write I/O Port
+ *
+ *
+ *
+ * @param[in] Address Physical Address
+ * @param[in] Width Access width
+ * @param[in] Value Pointer to value
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GnbLibIoWrite (
+ IN UINT16 Address,
+ IN ACCESS_WIDTH Width,
+ IN VOID *Value,
+ IN VOID *StdHeader
+ )
+{
+ if (Width >= AccessS3SaveWidth8) {
+ S3_SAVE_IO_WRITE (StdHeader, Address, Width, Value);
+ }
+ LibAmdIoWrite (Width, Address, Value, StdHeader);
+}
+/**
+ * Read IO port
+ *
+ *
+ *
+ * @param[in] Address Physical Address
+ * @param[in] Width Access width
+ * @param[out] Value Pointer to value
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GnbLibIoRead (
+ IN UINT16 Address,
+ IN ACCESS_WIDTH Width,
+ OUT VOID *Value,
+ IN VOID *StdHeader
+ )
+{
+ LibAmdIoRead (Width, Address, Value, StdHeader);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibIoAcc.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibIoAcc.h
new file mode 100644
index 0000000..4521cfd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibIoAcc.h
@@ -0,0 +1,66 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access I/O registers.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _IOACCLIB_H_
+#define _IOACCLIB_H_
+
+
+VOID
+GnbLibIoWrite (
+ IN UINT16 Address,
+ IN ACCESS_WIDTH Width,
+ IN VOID *Value,
+ IN VOID *StdHeader
+ );
+
+VOID
+GnbLibIoRead (
+ IN UINT16 Address,
+ IN ACCESS_WIDTH Width,
+ OUT VOID *Value,
+ IN VOID *StdHeader
+ );
+
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibMemAcc.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibMemAcc.c
new file mode 100644
index 0000000..ad6433b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibMemAcc.c
@@ -0,0 +1,125 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access MMIO registers.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "Porting.h"
+#include "AMD.h"
+#include "amdlib.h"
+#include "GnbLibMemAcc.h"
+#include "S3SaveState.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBMEMACC_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write Memory/MMIO registers
+ *
+ *
+ *
+ * @param[in] Address Physical Address
+ * @param[in] Width Access width
+ * @param[in] Value Pointer to value
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GnbLibMemWrite (
+ IN UINT64 Address,
+ IN ACCESS_WIDTH Width,
+ IN VOID *Value,
+ IN VOID *StdHeader
+ )
+{
+ if (Width >= AccessS3SaveWidth8) {
+ S3_SAVE_MEM_WRITE (StdHeader, Address, Width, Value);
+ }
+ LibAmdMemWrite (Width, Address, Value, StdHeader);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read Memory/MMIO registers
+ *
+ *
+ *
+ * @param[in] Address Physical Address
+ * @param[in] Width Access width
+ * @param[out] Value Pointer to value
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GnbLibMemRead (
+ IN UINT64 Address,
+ IN ACCESS_WIDTH Width,
+ OUT VOID *Value,
+ IN VOID *StdHeader
+ )
+{
+ LibAmdMemRead (Width, Address, Value, StdHeader);
+}
+
+
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibMemAcc.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibMemAcc.h
new file mode 100644
index 0000000..908b1ec
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibMemAcc.h
@@ -0,0 +1,73 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access MMIO registers.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _MEMACCLIB_H_
+#define _MEMACCLIB_H_
+
+VOID
+GnbLibMemWrite (
+ IN UINT64 Address,
+ IN ACCESS_WIDTH Width,
+ IN VOID *Value,
+ IN VOID *StdHeader
+ );
+
+VOID
+GnbLibMemRead (
+ IN UINT64 Address,
+ IN ACCESS_WIDTH Width,
+ OUT VOID *Value,
+ IN VOID *StdHeader
+ );
+
+VOID
+GnbLibMemRMW (
+ IN UINT64 Address,
+ IN ACCESS_WIDTH Width,
+ IN UINT32 Mask,
+ IN UINT32 Value,
+ IN VOID *Config
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibPci.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibPci.c
new file mode 100644
index 0000000..10ef0a3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibPci.c
@@ -0,0 +1,403 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Various PCI service routines.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85947 $ @e \$Date: 2013-01-14 17:25:21 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbLibPciAcc.h"
+#include "GnbLibPci.h"
+#include "GnbLib.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBPCI_FILECODE
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Check if device present
+ *
+ *
+ *
+ * @param[in] Address PCI address (as described in PCI_ADDR)
+ * @param[in] StdHeader Standard configuration header
+ * @retval TRUE Device is present
+ * @retval FALSE Device is not present
+ */
+
+BOOLEAN
+GnbLibPciIsDevicePresent (
+ IN UINT32 Address,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 DeviceId;
+ GnbLibPciRead (Address, AccessWidth32, &DeviceId, StdHeader);
+ if (DeviceId == 0xffffffff) {
+ return FALSE;
+ } else {
+ return TRUE;
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Check if device is bridge
+ *
+ *
+ *
+ * @param[in] Address PCI address (as described in PCI_ADDR)
+ * @param[in] StdHeader Standard configuration header
+ * @retval TRUE Device is a bridge
+ * @retval FALSE Device is not a bridge
+ */
+
+BOOLEAN
+GnbLibPciIsBridgeDevice (
+ IN UINT32 Address,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 Header;
+ GnbLibPciRead (Address | 0xe, AccessWidth8, &Header, StdHeader);
+ if ((Header & 0x7f) == 1) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Check if device is multifunction
+ *
+ *
+ *
+ * @param[in] Address PCI address (as described in PCI_ADDR)
+ * @param[in] StdHeader Standard configuration header
+ * @retval TRUE Device is a multifunction device.
+ * @retval FALSE Device is a single function device.
+ *
+ */
+BOOLEAN
+GnbLibPciIsMultiFunctionDevice (
+ IN UINT32 Address,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 Header;
+ GnbLibPciRead (Address | 0xe, AccessWidth8, &Header, StdHeader);
+ if ((Header & 0x80) != 0) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Check if device is PCIe device
+ *
+ *
+ *
+ * @param[in] Address PCI address (as described in PCI_ADDR)
+ * @param[in] StdHeader Standard configuration header
+ * @retval TRUE Device is a PCIe device
+ * @retval FALSE Device is not a PCIe device
+ *
+ */
+
+BOOLEAN
+GnbLibPciIsPcieDevice (
+ IN UINT32 Address,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ if (GnbLibFindPciCapability (Address, PCIE_CAP_ID, StdHeader) != 0 ) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Find PCI capability pointer
+ *
+ *
+ *
+ * @param[in] Address PCI address (as described in PCI_ADDR)
+ * @param[in] CapabilityId PCI capability ID
+ * @param[in] StdHeader Standard configuration header
+ * @retval Register address of capability pointer
+ *
+ */
+
+UINT8
+GnbLibFindPciCapability (
+ IN UINT32 Address,
+ IN UINT8 CapabilityId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 CapabilityPtr;
+ UINT8 CurrentCapabilityId;
+ CapabilityPtr = 0x34;
+ if (!GnbLibPciIsDevicePresent (Address, StdHeader)) {
+ return 0;
+ }
+ while (CapabilityPtr != 0) {
+ GnbLibPciRead (Address | CapabilityPtr, AccessWidth8 , &CapabilityPtr, StdHeader);
+ if (CapabilityPtr != 0) {
+ GnbLibPciRead (Address | CapabilityPtr , AccessWidth8 , &CurrentCapabilityId, StdHeader);
+ if (CurrentCapabilityId == CapabilityId) {
+ break;
+ }
+ CapabilityPtr++;
+ }
+ }
+ return CapabilityPtr;
+}
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Find PCIe extended capability pointer
+ *
+ *
+ *
+ * @param[in] Address PCI address (as described in PCI_ADDR)
+ * @param[in] ExtendedCapabilityId Extended PCIe capability ID
+ * @param[in] StdHeader Standard configuration header
+ * @retval Register address of extended capability pointer
+ *
+ */
+
+
+UINT16
+GnbLibFindPcieExtendedCapability (
+ IN UINT32 Address,
+ IN UINT16 ExtendedCapabilityId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 CapabilityPtr;
+ UINT32 ExtendedCapabilityIdBlock;
+ if (GnbLibPciIsPcieDevice (Address, StdHeader)) {
+ GnbLibPciRead (Address | 0x100 , AccessWidth32 , &ExtendedCapabilityIdBlock, StdHeader);
+ if ((ExtendedCapabilityIdBlock != 0) && ((UINT16)ExtendedCapabilityIdBlock != 0xffff)) {
+ do {
+ CapabilityPtr = (UINT16) ((ExtendedCapabilityIdBlock >> 20) & 0xfff);
+ if ((UINT16)ExtendedCapabilityIdBlock == ExtendedCapabilityId) {
+ return CapabilityPtr;
+ }
+ GnbLibPciRead (Address | CapabilityPtr , AccessWidth32 , &ExtendedCapabilityIdBlock, StdHeader);
+ } while (((ExtendedCapabilityIdBlock >> 20) & 0xfff) != 0);
+ }
+ }
+ return 0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Scan range of device on PCI bus.
+ *
+ *
+ *
+ * @param[in] Start Start address to start scan from
+ * @param[in] End End address of scan
+ * @param[in] ScanData Supporting data
+ *
+ */
+/*----------------------------------------------------------------------------------------*/
+VOID
+GnbLibPciScan (
+ IN PCI_ADDR Start,
+ IN PCI_ADDR End,
+ IN GNB_PCI_SCAN_DATA *ScanData
+ )
+{
+ UINTN Bus;
+ UINTN Device;
+ UINTN LastDevice;
+ UINTN Function;
+ UINTN LastFunction;
+ PCI_ADDR PciDevice;
+ SCAN_STATUS Status;
+
+ for (Bus = Start.Address.Bus; Bus <= End.Address.Bus; Bus++) {
+ Device = (Bus == Start.Address.Bus) ? Start.Address.Device : 0x00;
+ LastDevice = (Bus == End.Address.Bus) ? End.Address.Device : 0x1F;
+ for ( ; Device <= LastDevice; Device++) {
+ if ((Bus == Start.Address.Bus) && (Device == Start.Address.Device)) {
+ Function = Start.Address.Function;
+ } else {
+ Function = 0x0;
+ }
+ PciDevice.AddressValue = MAKE_SBDFO (0, Bus, Device, Function, 0);
+ if (!GnbLibPciIsDevicePresent (PciDevice.AddressValue, ScanData->StdHeader)) {
+ continue;
+ }
+ if (GnbLibPciIsMultiFunctionDevice (PciDevice.AddressValue, ScanData->StdHeader)) {
+ if ((Bus == End.Address.Bus) && (Device == End.Address.Device)) {
+ LastFunction = Start.Address.Function;
+ } else {
+ LastFunction = 0x7;
+ }
+ } else {
+ LastFunction = 0x0;
+ }
+ for ( ; Function <= LastFunction; Function++) {
+ PciDevice.AddressValue = MAKE_SBDFO (0, Bus, Device, Function, 0);
+ if (GnbLibPciIsDevicePresent (PciDevice.AddressValue, ScanData->StdHeader)) {
+ Status = ScanData->GnbScanCallback (PciDevice, ScanData);
+ if ((Status & SCAN_SKIP_FUNCTIONS) != 0) {
+ Function = LastFunction + 1;
+ }
+ if ((Status & SCAN_SKIP_DEVICES) != 0) {
+ Device = LastDevice + 1;
+ }
+ if ((Status & SCAN_SKIP_BUSES) != 0) {
+ Bus = End.Address.Bus + 1;
+ }
+ }
+ }
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Scan all subordinate buses
+ *
+ *
+ * @param[in] Bridge PCI bridge address
+ * @param[in,out] ScanData Scan configuration data
+ *
+ */
+VOID
+GnbLibPciScanSecondaryBus (
+ IN PCI_ADDR Bridge,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ )
+{
+ PCI_ADDR StartRange;
+ PCI_ADDR EndRange;
+ UINT8 SecondaryBus;
+ GnbLibPciRead (Bridge.AddressValue | 0x19, AccessWidth8, &SecondaryBus, ScanData->StdHeader);
+ if (SecondaryBus != 0) {
+ StartRange.AddressValue = MAKE_SBDFO (0, SecondaryBus, 0, 0, 0);
+ EndRange.AddressValue = MAKE_SBDFO (0, SecondaryBus, 0x1f, 0x7, 0);
+ GnbLibPciScan (StartRange, EndRange, ScanData);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get PCIe device type
+ *
+ *
+ *
+ * @param[in] Device PCI address of device.
+ * @param[in] StdHeader Northbridge configuration structure pointer.
+ *
+ * @retval PCIE_DEVICE_TYPE
+ */
+ /*----------------------------------------------------------------------------------------*/
+
+PCIE_DEVICE_TYPE
+GnbLibGetPcieDeviceType (
+ IN PCI_ADDR Device,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 PcieCapPtr;
+ UINT8 Value;
+
+ PcieCapPtr = GnbLibFindPciCapability (Device.AddressValue, PCIE_CAP_ID, StdHeader);
+ if (PcieCapPtr != 0) {
+ GnbLibPciRead (Device.AddressValue | (PcieCapPtr + 0x2) , AccessWidth8, &Value, StdHeader);
+ return Value >> 4;
+ }
+ return PcieNotPcieDevice;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Save config space area
+ *
+ *
+ *
+ * @param[in] Address PCI address of device.
+ * @param[in] StartRegisterAddress Start register address.
+ * @param[in] EndRegisterAddress End register address.
+ * @param[in] Width Access width.
+ * @param[in] StdHeader Standard header.
+ *
+ */
+ /*----------------------------------------------------------------------------------------*/
+
+VOID
+GnbLibS3SaveConfigSpace (
+ IN UINT32 Address,
+ IN UINT16 StartRegisterAddress,
+ IN UINT16 EndRegisterAddress,
+ IN ACCESS_WIDTH Width,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 Index;
+ UINT16 Delta;
+ UINT16 Length;
+ Length = (StartRegisterAddress < EndRegisterAddress) ? (EndRegisterAddress - StartRegisterAddress) : (StartRegisterAddress - EndRegisterAddress);
+ Delta = LibAmdAccessWidth (Width);
+ for (Index = 0; Index <= Length; Index = Index + Delta) {
+ GnbLibPciRMW (
+ Address | ((StartRegisterAddress < EndRegisterAddress) ? (StartRegisterAddress + Index) : (StartRegisterAddress - Index)),
+ Width,
+ 0xffffffff,
+ 0x0,
+ StdHeader
+ );
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibPci.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibPci.h
new file mode 100644
index 0000000..d1cf252
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibPci.h
@@ -0,0 +1,166 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Various PCI service routines.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBLIBPCI_H_
+#define _GNBLIBPCI_H_
+
+#define PCIE_CAP_ID 0x10
+#define IOMMU_CAP_ID 0x0F
+
+/// PCIe device type
+typedef enum {
+ PcieDeviceEndPoint, ///< Endpoint
+ PcieDeviceLegacyEndPoint, ///< Legacy endpoint
+ PcieDeviceRootComplex = 4, ///< Root complex
+ PcieDeviceUpstreamPort, ///< Upstream port
+ PcieDeviceDownstreamPort, ///< Downstream Port
+ PcieDevicePcieToPcix, ///< PCIe to PCI/PCIx bridge
+ PcieDevicePcixToPcie, ///< PCI/PCIx to PCIe bridge
+ PcieNotPcieDevice = 0xff ///< unknown device
+} PCIE_DEVICE_TYPE;
+
+typedef UINT32 SCAN_STATUS;
+
+#define SCAN_SKIP_FUNCTIONS 0x1
+#define SCAN_SKIP_DEVICES 0x2
+#define SCAN_SKIP_BUSES 0x4
+#define SCAN_SUCCESS 0x0
+
+// Forward declaration needed for multi-structure mutual references
+AGESA_FORWARD_DECLARATION (GNB_PCI_SCAN_DATA);
+
+typedef SCAN_STATUS (*GNB_SCAN_CALLBACK) (
+ IN PCI_ADDR Device,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ );
+
+///Scan supporting data
+struct _GNB_PCI_SCAN_DATA {
+ GNB_SCAN_CALLBACK GnbScanCallback; ///< Callback for each found device
+ AMD_CONFIG_PARAMS *StdHeader; ///< Standard configuration header
+};
+
+#define PCIE_CAP_ID 0x10
+#define PCIE_LINK_CAP_REGISTER 0x0C
+#define PCIE_LINK_CTRL_REGISTER 0x10
+#define PCIE_DEVICE_CAP_REGISTER 0x04
+#define PCIE_DEVICE_CTRL_REGISTER 0x08
+#define PCIE_ASPM_L1_SUPPORT_CAP BIT11
+
+#define MAX_PAYLOAD_128 0x0 ///< Max allowed payload size 128 bytes
+#define MAX_PAYLOAD_256 0x1 ///< Max allowed payload size 256 bytes
+#define MAX_PAYLOAD_512 0x2 ///< Max allowed payload size 512 bytes
+#define MAX_PAYLOAD_1024 0x3 ///< Max allowed payload size 1024 bytes
+#define MAX_PAYLOAD_2048 0x4 ///< Max allowed payload size 2048 bytes
+#define MAX_PAYLOAD_4096 0x5 ///< Max allowed payload size 4096 bytes
+#define MAX_PAYLOAD 0x5 ///< Max allowed payload size according to spec is 101b (4096 bytes)
+
+BOOLEAN
+GnbLibPciIsDevicePresent (
+ IN UINT32 Address,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GnbLibPciIsBridgeDevice (
+ IN UINT32 Address,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GnbLibPciIsMultiFunctionDevice (
+ IN UINT32 Address,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GnbLibPciIsPcieDevice (
+ IN UINT32 Address,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GnbLibFindPciCapability (
+ IN UINT32 Address,
+ IN UINT8 CapabilityId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbLibPciScan (
+ IN PCI_ADDR Start,
+ IN PCI_ADDR End,
+ IN GNB_PCI_SCAN_DATA *ScanData
+ );
+
+VOID
+GnbLibPciScanSecondaryBus (
+ IN PCI_ADDR Bridge,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ );
+
+PCIE_DEVICE_TYPE
+GnbLibGetPcieDeviceType (
+ IN PCI_ADDR Device,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbLibS3SaveConfigSpace (
+ IN UINT32 Address,
+ IN UINT16 StartRegisterAddress,
+ IN UINT16 EndRegisterAddress,
+ IN ACCESS_WIDTH Width,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT16
+GnbLibFindPcieExtendedCapability (
+ IN UINT32 Address,
+ IN UINT16 ExtendedCapabilityId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibPciAcc.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibPciAcc.c
new file mode 100644
index 0000000..d9d708f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibPciAcc.c
@@ -0,0 +1,156 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access PCI config space registers
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "Porting.h"
+#include "AMD.h"
+#include "amdlib.h"
+#include "GnbLibPciAcc.h"
+#include "S3SaveState.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBCOMMONLIB_GNBLIBPCIACC_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write PCI registers
+ *
+ *
+ *
+ * @param[in] Address PCI address (as presented in PCI_ADDR.AddressValue)
+ * @param[in] Width Access width
+ * @param[in] Value Pointer to value
+ * @param[in] StdHeader Pointer to standard header
+ */
+VOID
+GnbLibPciWrite (
+ IN UINT32 Address,
+ IN ACCESS_WIDTH Width,
+ IN VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+ PciAddress.AddressValue = Address;
+ if (Width >= AccessS3SaveWidth8) {
+ S3_SAVE_PCI_WRITE (StdHeader, PciAddress, Width, Value);
+ }
+ LibAmdPciWrite (Width, PciAddress, Value, StdHeader);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read PCI registers
+ *
+ *
+ *
+ * @param[in] Address PCI address (as presented in PCI_ADDR.AddressValue)
+ * @param[in] Width Access width
+ * @param[out] Value Pointer to value
+ * @param[in] StdHeader Pointer to standard header
+ */
+
+VOID
+GnbLibPciRead (
+ IN UINT32 Address,
+ IN ACCESS_WIDTH Width,
+ OUT VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+ PciAddress.AddressValue = Address;
+ LibAmdPciRead (Width, PciAddress, Value, StdHeader);
+}
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Poll PCI reg
+ *
+ *
+ *
+ * @param[in] Address PCI address (as presented in PCI_ADDR.AddressValue)
+ * @param[in] Width Access width
+ * @param[in] Data Data to compare
+ * @param[in] DataMask AND mask
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GnbLibPciPoll (
+ IN UINT32 Address,
+ IN ACCESS_WIDTH Width,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR PciAddress;
+ PciAddress.AddressValue = Address;
+ if (Width >= AccessS3SaveWidth8) {
+ S3_SAVE_PCI_POLL (StdHeader, PciAddress, Width, Data, DataMask, 0xffffffff);
+ }
+ LibAmdPciPoll (Width, PciAddress, Data, DataMask, 0xffffffff, StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibPciAcc.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibPciAcc.h
new file mode 100644
index 0000000..14808e0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbLibPciAcc.h
@@ -0,0 +1,73 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access PCI config space registers
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBLIBPCIACC_H_
+#define _GNBLIBPCIACC_H_
+
+VOID
+GnbLibPciWrite (
+ IN UINT32 Address,
+ IN ACCESS_WIDTH Width,
+ IN VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbLibPciRead (
+ IN UINT32 Address,
+ IN ACCESS_WIDTH Width,
+ OUT VOID *Value,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbLibPciPoll (
+ IN UINT32 Address,
+ IN ACCESS_WIDTH Width,
+ IN VOID *Data,
+ IN VOID *DataMask,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbTimerLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbTimerLib.c
new file mode 100644
index 0000000..bbbede8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbTimerLib.c
@@ -0,0 +1,157 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Various Timer services.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 86079 $ @e \$Date: 2013-01-16 00:59:04 -0600 (Wed, 16 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "S3SaveState.h"
+#include "Gnb.h"
+#include "GnbLib.h"
+#include "GnbTimerLib.h"
+#include "GnbFamServices.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBCOMMONLIB_GNBTIMERLIB_FILECODE
+
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Stall and save to script table
+ *
+ *
+ *
+ * @param[in] Microsecond Stall time
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GnbLibStallS3Save (
+ IN UINT32 Microsecond,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ S3_SAVE_DISPATCH (StdHeader, GnbLibStallS3Script_ID, sizeof (Microsecond), &Microsecond);
+ GnbLibStall (Microsecond, StdHeader);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Stall
+ *
+ *
+ *
+ * @param[in] Microsecond Stall time
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GnbLibStall (
+ IN UINT32 Microsecond,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 TimeStampStart;
+ UINT32 TimeStampDelta;
+ UINT32 TimeStampCurrent;
+
+ TimeStampStart = GnbFmTimeStamp (StdHeader);
+ do {
+ TimeStampCurrent = GnbFmTimeStamp (StdHeader);
+ TimeStampDelta = ((TimeStampCurrent > TimeStampStart) ? (TimeStampCurrent - TimeStampStart) : (0xffffffffull - TimeStampStart + TimeStampCurrent));
+ } while (TimeStampDelta < Microsecond);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Stall S3 script
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @param[in] ContextLength Context Length (not used)
+ * @param[in] Context pointer to UINT32 number of us
+ */
+VOID
+GnbLibStallS3Script (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 ContextLength,
+ IN VOID* Context
+ )
+{
+ GnbLibStall (* ((UINT32*) Context), StdHeader);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Family specific time stamp function
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval Count
+ */
+UINT32
+GnbFmTimeStamp (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ GNB_FAM_TS_SERVICES *GnbFamTsFunc;
+ GNB_HANDLE *GnbHandle;
+
+ GnbHandle = GnbGetHandle (StdHeader);
+
+ Status = GnbLibLocateService (GnbFamTsService, GnbGetSocketId (GnbHandle), (VOID **)&GnbFamTsFunc, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return GnbFamTsFunc->GnbFmTimeStamp (StdHeader);
+ }
+ return 0;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbTimerLib.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbTimerLib.h
new file mode 100644
index 0000000..c7796d1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbCommonLib/GnbTimerLib.h
@@ -0,0 +1,73 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Various Timer Services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 86079 $ @e \$Date: 2013-01-16 00:59:04 -0600 (Wed, 16 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBTIMERLIB_H_
+#define _GNBTIMERLIB_H_
+
+VOID
+GnbLibStallS3Save (
+ IN UINT32 Microsecond,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbLibStall (
+ IN UINT32 Microsecond,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+GnbFmTimeStamp (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbLibStallS3Script (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 ContextLength,
+ IN VOID* Context
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbFamTranslation/GnbPcieTranslation.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbFamTranslation/GnbPcieTranslation.c
new file mode 100644
index 0000000..f42e3063
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbFamTranslation/GnbPcieTranslation.c
@@ -0,0 +1,515 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Family specific function translation
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBFAMTRANSLATION_GNBPCIETRANSLATION_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Configure engine list to support lane allocation according to configuration ID.
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] EngineType Engine Type
+ * @param[in] ConfigurationId Configuration ID
+ * @retval AGESA_SUCCESS Configuration successfully applied
+ * @retval AGESA_UNSUPPORTED No more configuration available for given engine type
+ * @retval AGESA_ERROR Requested configuration not supported
+ */
+AGESA_STATUS
+PcieFmConfigureEnginesLaneAllocation (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIE_ENGINE_TYPE EngineType,
+ IN UINT8 ConfigurationId
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_FAM_CONFIG_SERVICES *PcieConfigService;
+
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Wrapper->Header);
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Wrapper->Header);
+ Status = GnbLibLocateService (GnbPcieFamConfigService, Complex->SocketId, (VOID **)&PcieConfigService, GnbLibGetHeader (Pcie));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieConfigService->PcieFmConfigureEnginesLaneAllocation (Wrapper, EngineType, ConfigurationId);
+ }
+ return AGESA_ERROR;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get core configuration value
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to internal configuration data area
+ * @param[in] CoreId Core ID
+ * @param[in] ConfigurationSignature Configuration signature
+ * @param[out] ConfigurationValue Configuration value (for core configuration)
+ * @retval AGESA_SUCCESS Configuration successfully applied
+ * @retval AGESA_ERROR Core configuration value can not be determined
+ */
+AGESA_STATUS
+PcieFmGetCoreConfigurationValue (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT8 CoreId,
+ IN UINT64 ConfigurationSignature,
+ IN UINT8 *ConfigurationValue
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_FAM_INIT_SERVICES *PcieInitService;
+
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Wrapper->Header);
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Wrapper->Header);
+ Status = GnbLibLocateService (GnbPcieFamInitService, Complex->SocketId, (VOID **)&PcieInitService, GnbLibGetHeader (Pcie));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieInitService->PcieFmGetCoreConfigurationValue (Wrapper, CoreId, ConfigurationSignature, ConfigurationValue);
+ }
+ return AGESA_ERROR;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if engine can be remapped to Device/function number requested by user
+ * defined engine descriptor
+ *
+ * Function only called if requested device/function does not much native device/function
+ *
+ * @param[in] PortDescriptor Pointer to user defined engine descriptor
+ * @param[in] Engine Pointer engine configuration
+ * @retval TRUE Descriptor can be mapped to engine
+ * @retval FALSE Descriptor can NOT be mapped to engine
+ */
+
+BOOLEAN
+PcieFmCheckPortPciDeviceMapping (
+ IN PCIe_PORT_DESCRIPTOR *PortDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_FAM_CONFIG_SERVICES *PcieConfigService;
+
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Engine->Header);
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Complex->Header);
+ Status = GnbLibLocateService (GnbPcieFamConfigService, Complex->SocketId, (VOID **)&PcieConfigService, GnbLibGetHeader (Pcie));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieConfigService->PcieFmCheckPortPciDeviceMapping (PortDescriptor, Engine);
+ }
+ return FALSE;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get core configuration string
+ *
+ * Debug function for logging configuration
+ *
+ * @param[in] Wrapper Pointer to internal configuration data area
+ * @param[in] ConfigurationValue Configuration value
+ * @retval Configuration string
+ */
+
+CONST CHAR8*
+PcieFmDebugGetCoreConfigurationString (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT8 ConfigurationValue
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_FAM_DEBUG_SERVICES *PcieDebugService;
+
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Wrapper->Header);
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Complex->Header);
+ Status = GnbLibLocateService (GnbPcieFamDebugService, Complex->SocketId, (VOID **)&PcieDebugService, GnbLibGetHeader (Pcie));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieDebugService->PcieFmDebugGetCoreConfigurationString (Wrapper, ConfigurationValue);
+ }
+ return " !!! Something Wrong !!!";
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get wrapper name
+ *
+ * Debug function for logging wrapper name
+ *
+ * @param[in] Wrapper Pointer to internal configuration data area
+ * @retval Wrapper Name string
+ */
+
+CONST CHAR8*
+PcieFmDebugGetWrapperNameString (
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_FAM_DEBUG_SERVICES *PcieDebugService;
+
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Wrapper->Header);
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Complex->Header);
+ Status = GnbLibLocateService (GnbPcieFamDebugService, Complex->SocketId, (VOID **)&PcieDebugService, GnbLibGetHeader (Pcie));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieDebugService->PcieFmDebugGetWrapperNameString (Wrapper);
+ }
+ return " !!! Something Wrong !!!";
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get register address name
+ *
+ * Debug function for logging register trace
+ *
+ * @param[in] Silicon Silicon config descriptor
+ * @param[in] AddressFrame Address Frame
+ * @retval Register address name
+ */
+CONST CHAR8*
+PcieFmDebugGetHostRegAddressSpaceString (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN UINT16 AddressFrame
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_FAM_DEBUG_SERVICES *PcieDebugService;
+
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Silicon->Header);
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Complex->Header);
+ Status = GnbLibLocateService (GnbPcieFamDebugService, Complex->SocketId, (VOID **)&PcieDebugService, GnbLibGetHeader (Pcie));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieDebugService->PcieFmDebugGetHostRegAddressSpaceString (Silicon, AddressFrame);
+ }
+ return " !!! Something Wrong !!!";
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if the lane can be muxed by link width requested by user
+ * defined engine descriptor
+ *
+ * Check Engine StartCoreLane could be aligned by user requested link width(x1, x2, x4, x8, x16).
+ * Check Engine StartCoreLane could be aligned by user requested link width x2.
+ *
+ * @param[in] PortDescriptor Pointer to user defined engine descriptor
+ * @param[in] Engine Pointer engine configuration
+ * @retval TRUE Lane can be muxed
+ * @retval FALSE Lane can NOT be muxed
+ */
+
+BOOLEAN
+PcieFmCheckPortPcieLaneCanBeMuxed (
+ IN PCIe_PORT_DESCRIPTOR *PortDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_FAM_CONFIG_SERVICES *PcieConfigService;
+
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Engine->Header);
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Complex->Header);
+ Status = GnbLibLocateService (GnbPcieFamConfigService, Complex->SocketId, (VOID **)&PcieConfigService, GnbLibGetHeader (Pcie));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieConfigService->PcieFmCheckPortPcieLaneCanBeMuxed (PortDescriptor, Engine);
+ }
+ return FALSE;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Map engine to specific PCI device address
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine configuration
+ * @retval AGESA_ERROR Fail to map PCI device address
+ * @retval AGESA_SUCCESS Successfully allocate PCI address
+ */
+
+AGESA_STATUS
+PcieFmMapPortPciAddress (
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_FAM_CONFIG_SERVICES *PcieConfigService;
+
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Engine->Header);
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Complex->Header);
+ Status = GnbLibLocateService (GnbPcieFamConfigService, Complex->SocketId, (VOID **)&PcieConfigService, GnbLibGetHeader (Pcie));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieConfigService->PcieFmMapPortPciAddress (Engine);
+ }
+ return AGESA_ERROR;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get total number of silicons/wrappers/engines for this complex
+ *
+ *
+ *
+ * @param[in] SocketId Socket ID.
+ * @param[out] Length Length of configuration info block
+ * @param[out] StdHeader Standard Configuration Header
+ * @retval AGESA_SUCCESS Configuration data length is correct
+ */
+AGESA_STATUS
+PcieFmGetComplexDataLength (
+ IN UINT8 SocketId,
+ OUT UINTN *Length,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_FAM_CONFIG_SERVICES *PcieConfigService;
+ Status = GnbLibLocateService (GnbPcieFamConfigService, SocketId, (VOID **)&PcieConfigService, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieConfigService->PcieFmGetComplexDataLength (SocketId, Length, StdHeader);
+ }
+ return Status;
+}
+
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Build configuration
+ *
+ *
+ * @param[in] SocketId Socket ID.
+ * @param[out] Buffer Pointer to buffer to build internal complex data structure
+ * @param[out] StdHeader Standard configuration header.
+ * @retval AGESA_SUCCESS Configuration data build successfully
+ */
+AGESA_STATUS
+PcieFmBuildComplexConfiguration (
+ IN UINT8 SocketId,
+ OUT VOID *Buffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_FAM_CONFIG_SERVICES *PcieConfigService;
+ Status = GnbLibLocateService (GnbPcieFamConfigService, SocketId, (VOID **)&PcieConfigService, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieConfigService->PcieFmBuildComplexConfiguration (SocketId, Buffer, StdHeader);
+ }
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get max link speed capability supported by this port
+ *
+ *
+ *
+ * @param[in] Flags See Flags PCIE_PORT_GEN_CAP_BOOT / PCIE_PORT_GEN_CAP_MAX
+ * @param[in] Engine Pointer to engine config descriptor
+ * @retval PcieGen1/PcieGen2 Max supported link gen capability
+ */
+PCIE_LINK_SPEED_CAP
+PcieFmGetLinkSpeedCap (
+ IN UINT32 Flags,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_FAM_INIT_SERVICES *PcieInitService;
+
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Engine->Header);
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Complex->Header);
+ Status = GnbLibLocateService (GnbPcieFamInitService, Complex->SocketId, (VOID **)&PcieInitService, GnbLibGetHeader (Pcie));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieInitService->PcieFmGetLinkSpeedCap (Flags, Engine);
+ }
+ return PcieGen1;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get native PHY lane bitmap
+ *
+ *
+ * @param[in] PhyLaneBitmap Package PHY lane bitmap
+ * @param[in] Engine Standard configuration header.
+ * @retval Native PHY lane bitmap
+ */
+UINT32
+PcieFmGetNativePhyLaneBitmap (
+ IN UINT32 PhyLaneBitmap,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_FAM_INIT_SERVICES *PcieInitService;
+
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Engine->Header);
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Complex->Header);
+ Status = GnbLibLocateService (GnbPcieFamInitService, Complex->SocketId, (VOID **)&PcieInitService, GnbLibGetHeader (Pcie));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieInitService->PcieFmGetNativePhyLaneBitmap (PhyLaneBitmap, Engine);
+ }
+ return 0x0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set current link speed
+ *
+ *
+ * @param[in] LinkSpeedCapability Link Speed Capability
+ * @param[in] Engine Pointer to engine configuration descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+PcieFmSetLinkSpeedCap (
+ IN PCIE_LINK_SPEED_CAP LinkSpeedCapability,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_FAM_INIT_SERVICES *PcieInitService;
+
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Engine->Header);
+ Status = GnbLibLocateService (GnbPcieFamInitService, Complex->SocketId, (VOID **)&PcieInitService, GnbLibGetHeader (Pcie));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ PcieInitService->PcieFmSetLinkSpeedCap (LinkSpeedCapability, Engine, Pcie);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get SB port info
+ *
+ *
+ * @param[out] SocketId Socket ID
+ * @param[out] SbPort Pointer to SB configuration descriptor
+ * @param[in] StdHeader Standard configuration header.
+ * @retval AGESA_SUCCESS SB configuration determined successfully
+ */
+AGESA_STATUS
+PcieFmGetSbConfigInfo (
+ IN UINT8 SocketId,
+ OUT PCIe_PORT_DESCRIPTOR *SbPort,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_FAM_CONFIG_SERVICES *PcieConfigService;
+ Status = GnbLibLocateService (GnbPcieFamConfigService, SocketId, (VOID **)&PcieConfigService, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return PcieConfigService->PcieFmGetSbConfigInfo (SocketId, SbPort, StdHeader);
+ }
+ return Status;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbFamTranslation/GnbTranslation.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbFamTranslation/GnbTranslation.c
new file mode 100644
index 0000000..1ae93d42
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbFamTranslation/GnbTranslation.c
@@ -0,0 +1,245 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Family specific function translation
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieConfig.h"
+#include "GnbFamServices.h"
+#include "GnbGfxFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbGfx.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBFAMTRANSLATION_GNBTRANSLATION_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if IOMMU unit present and enabled
+ *
+ *
+ *
+ *
+ * @param[in] GnbHandle Gnb handle
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+BOOLEAN
+GnbFmCheckIommuPresent (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ GNB_FAM_IOMMU_SERVICES *GnbIommuConfigService;
+ Status = GnbLibLocateService (GnbIommuService, GnbGetSocketId (GnbHandle), (VOID **)&GnbIommuConfigService, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return GnbIommuConfigService->GnbFmCheckIommuPresent (GnbHandle, StdHeader);
+ }
+ return FALSE;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Create IVRS entry
+ *
+ *
+ * @param[in] GnbHandle Gnb handle
+ * @param[in] Type Entry type
+ * @param[in] Ivrs IVRS table pointer
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+
+AGESA_STATUS
+GnbFmCreateIvrsEntry (
+ IN GNB_HANDLE *GnbHandle,
+ IN IVRS_BLOCK_TYPE Type,
+ IN VOID *Ivrs,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ GNB_FAM_IOMMU_SERVICES *GnbIommuConfigService;
+ Status = GnbLibLocateService (GnbIommuService, GnbGetSocketId (GnbHandle), (VOID **)&GnbIommuConfigService, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return GnbIommuConfigService->GnbFmCreateIvrsEntry (GnbHandle, Type, Ivrs, StdHeader);
+ }
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Map graphics engine to display path
+ *
+ *
+ *
+ *
+ * @param[in] Engine Engine configuration info
+ * @param[out] DisplayPathList Display path list
+ * @param[in] Gfx Pointer to global GFX configuration
+ *
+ */
+AGESA_STATUS
+GfxFmMapEngineToDisplayPath (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ OUT EXT_DISPLAY_PATH *DisplayPathList,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ AGESA_STATUS Status;
+ GFX_FAM_SERVICES *GfxFamilyService;
+ GNB_HANDLE *GnbHandle;
+ GnbHandle = GnbGetHandle (GnbLibGetHeader (Gfx));
+ Status = GnbLibLocateService (GfxFamService, GnbGetSocketId (GnbHandle), (VOID **)&GfxFamilyService, GnbLibGetHeader (Gfx));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return GfxFamilyService->GfxMapEngineToDisplayPath (Engine, DisplayPathList, Gfx);
+ }
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Calculate COF for DFS out of Main PLL
+ *
+ *
+ *
+ * @param[in] Did Did
+ * @param[in] StdHeader Standard Configuration Header
+ * @retval COF in 10khz
+ */
+
+UINT32
+GfxFmCalculateClock (
+ IN UINT8 Did,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ GFX_FAM_SERVICES *GfxFamilyService;
+ GNB_HANDLE *GnbHandle;
+ GnbHandle = GnbGetHandle (StdHeader);
+ Status = GnbLibLocateService (GfxFamService, GnbGetSocketId (GnbHandle), (VOID **)&GfxFamilyService, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return GfxFamilyService->GfxCalculateClock (Did, StdHeader);
+ }
+ return 200*100;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Disable GFX controller
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GfxFmDisableController (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ GFX_FAM_SERVICES *GfxFamilyService;
+ GNB_HANDLE *GnbHandle;
+ GnbHandle = GnbGetHandle (StdHeader);
+ Status = GnbLibLocateService (GfxFamService, GnbGetSocketId (GnbHandle), (VOID **)&GfxFamilyService, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ GfxFamilyService->GfxDisableController (StdHeader);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set idle voltage mode for GFX
+ *
+ *
+ * @param[in] Gfx Pointer to global GFX configuration
+ */
+
+BOOLEAN
+GfxFmIsVbiosPosted (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ AGESA_STATUS Status;
+ GFX_FAM_SERVICES *GfxFamilyService;
+ GNB_HANDLE *GnbHandle;
+ GnbHandle = GnbGetHandle (GnbLibGetHeader (Gfx));
+ Status = GnbLibLocateService (GfxFamService, GnbGetSocketId (GnbHandle), (VOID **)&GfxFamilyService, GnbLibGetHeader (Gfx));
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ return GfxFamilyService->GfxIsVbiosPosted (Gfx);
+ }
+ return TRUE;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigEnv.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigEnv.c
new file mode 100644
index 0000000..96dc841
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigEnv.c
@@ -0,0 +1,135 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize GFX configuration data structure.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbCommonLib.h"
+#include "GnbGfxConfig.h"
+#include "GfxConfigLib.h"
+#include "OptionGnb.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGENV_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GfxConfigEnvInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Update GFX config info at ENV
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS Always succeeds
+ */
+
+AGESA_STATUS
+GfxConfigEnvInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ AMD_ENV_PARAMS *EnvParamsPtr;
+ GFX_PLATFORM_CONFIG *Gfx;
+ AGESA_STATUS Status;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxConfigEnvInterface Enter\n");
+ Status = GfxLocateConfigData (StdHeader, &Gfx);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ EnvParamsPtr = (AMD_ENV_PARAMS *) StdHeader;
+ Gfx->Gnb3dStereoPinIndex = EnvParamsPtr->GnbEnvConfiguration.Gnb3dStereoPinIndex;
+ Gfx->LvdsSpreadSpectrum = EnvParamsPtr->GnbEnvConfiguration.LvdsSpreadSpectrum;
+ Gfx->LvdsSpreadSpectrumRate = EnvParamsPtr->GnbEnvConfiguration.LvdsSpreadSpectrumRate;
+ Gfx->LvdsPowerOnSeqDigonToDe = EnvParamsPtr->GnbEnvConfiguration.LvdsPowerOnSeqDigonToDe;
+ Gfx->LvdsPowerOnSeqDeToVaryBl = EnvParamsPtr->GnbEnvConfiguration.LvdsPowerOnSeqDeToVaryBl;
+ Gfx->LvdsPowerOnSeqDeToDigon = EnvParamsPtr->GnbEnvConfiguration.LvdsPowerOnSeqDeToDigon;
+ Gfx->LvdsPowerOnSeqVaryBlToDe = EnvParamsPtr->GnbEnvConfiguration.LvdsPowerOnSeqVaryBlToDe;
+ Gfx->LvdsPowerOnSeqOnToOffDelay = EnvParamsPtr->GnbEnvConfiguration.LvdsPowerOnSeqOnToOffDelay;
+ Gfx->LvdsPowerOnSeqVaryBlToBlon = EnvParamsPtr->GnbEnvConfiguration.LvdsPowerOnSeqVaryBlToBlon;
+ Gfx->LvdsPowerOnSeqBlonToVaryBl = EnvParamsPtr->GnbEnvConfiguration.LvdsPowerOnSeqBlonToVaryBl;
+ Gfx->LvdsMaxPixelClockFreq = EnvParamsPtr->GnbEnvConfiguration.LvdsMaxPixelClockFreq;
+ Gfx->LcdBitDepthControlValue = EnvParamsPtr->GnbEnvConfiguration.LcdBitDepthControlValue;
+ Gfx->Lvds24bbpPanelMode = EnvParamsPtr->GnbEnvConfiguration.Lvds24bbpPanelMode;
+ Gfx->LvdsMiscControl.Value = EnvParamsPtr->GnbEnvConfiguration.LvdsMiscControl.Value;
+ Gfx->PcieRefClkSpreadSpectrum = EnvParamsPtr->GnbEnvConfiguration.PcieRefClkSpreadSpectrum;
+ Gfx->GnbRemoteDisplaySupport = EnvParamsPtr->GnbEnvConfiguration.GnbRemoteDisplaySupport;
+ Gfx->LVDSVoltAdjust = EnvParamsPtr->GnbEnvConfiguration.LvdsMiscVoltAdjustment;
+ Gfx->DisplayMiscControl.Value = EnvParamsPtr->GnbEnvConfiguration.DisplayMiscControl.Value;
+ Gfx->DpFixedVoltSwingType = EnvParamsPtr->GnbEnvConfiguration.DpFixedVoltSwingType;
+ GfxGetUmaInfo (&Gfx->UmaInfo, StdHeader);
+ }
+ GNB_DEBUG_CODE (
+ GfxConfigDebugDump (Gfx);
+ );
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxConfigEnvInterface Exit [0x%x]\n", Status);
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigLib.c
new file mode 100644
index 0000000..ae0128a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigLib.c
@@ -0,0 +1,264 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize GFX configuration data structure.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 86877 $ @e \$Date: 2013-01-28 10:59:42 -0600 (Mon, 28 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbCommonLib.h"
+#include "OptionGnb.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGLIB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+GfxEnableGmmAccess (
+ IN OUT GFX_PLATFORM_CONFIG *Gfx
+ );
+
+VOID
+GfxGetUmaInfo (
+ OUT UMA_INFO *UmaInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GfxLocateConfigData (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT GFX_PLATFORM_CONFIG **Gfx
+ );
+
+VOID
+GfxConfigDebugDump (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable GMM Access
+ *
+ *
+ *
+ * @param[in,out] Gfx Pointer to GFX configuration
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GfxEnableGmmAccess (
+ IN OUT GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT32 Value;
+
+ if (!GnbLibPciIsDevicePresent (Gfx->GfxPciAddress.AddressValue, GnbLibGetHeader (Gfx))) {
+ IDS_ERROR_TRAP;
+ return AGESA_ERROR;
+ }
+
+ // Check if base address for GMM allocated
+ GnbLibPciIndirectRead (GNB_SBDFO | 0x60, 0x1C | IOC_WRITE_ENABLE, AccessWidth32, &Value, GnbLibGetHeader (Gfx));
+ Gfx->GmmBase = 0;
+
+ if ((Value & 0x4) != 0) {
+ GnbLibPciRead (Gfx->GfxPciAddress.AddressValue | 0x1c, AccessWidth32, &Gfx->GmmBase, GnbLibGetHeader (Gfx));
+ Gfx->GmmBase = (UINT64) (Gfx->GmmBase << 32);
+ }
+
+ GnbLibPciRead (Gfx->GfxPciAddress.AddressValue | 0x18, AccessWidth32, &Value, GnbLibGetHeader (Gfx));
+ Gfx->GmmBase |= (Value & 0xfffffff0);
+ if (Gfx->GmmBase == 0) {
+ IDS_ERROR_TRAP;
+ return AGESA_ERROR;
+ }
+
+ // Check if base address for FB allocated
+ GnbLibPciRead (Gfx->GfxPciAddress.AddressValue | 0x10, AccessWidth32, &Value, GnbLibGetHeader (Gfx));
+ if ((Value & 0xfffffff0) == 0) {
+ IDS_ERROR_TRAP;
+ return AGESA_ERROR;
+ }
+ //Push CPU MMIO pci config to S3 script
+ GnbLibS3SaveConfigSpace (MAKE_SBDFO (0, 0, 0x18, 1, 0), 0xBC, 0x80, AccessS3SaveWidth32, GnbLibGetHeader (Gfx));
+ // Turn on memory decoding on APC to enable access to GMM register space
+ if (Gfx->GfxControllerMode == GfxControllerLegacyBridgeMode) {
+ GnbLibPciRMW (MAKE_SBDFO (0, 0, 1, 0, 0x4), AccessWidth32, 0xffffffff, BIT1 | BIT2, GnbLibGetHeader (Gfx));
+ //Push APC pci config to S3 script
+ GnbLibS3SaveConfigSpace (MAKE_SBDFO (0, 0, 1, 0, 0), 0x2C, 0x18, AccessS3SaveWidth32, GnbLibGetHeader (Gfx));
+ GnbLibS3SaveConfigSpace (MAKE_SBDFO (0, 0, 1, 0, 0), 0x4, 0x4, AccessS3SaveWidth16, GnbLibGetHeader (Gfx));
+ }
+ // Turn on memory decoding on GFX to enable access to GMM register space
+ GnbLibPciRMW (Gfx->GfxPciAddress.AddressValue | 0x4, AccessWidth32, 0xffffffff, BIT1 | BIT2, GnbLibGetHeader (Gfx));
+ //Push iGPU pci config to S3 script
+ GnbLibS3SaveConfigSpace (Gfx->GfxPciAddress.AddressValue, 0x24, 0x10, AccessS3SaveWidth32, GnbLibGetHeader (Gfx));
+ GnbLibS3SaveConfigSpace (Gfx->GfxPciAddress.AddressValue, 0x04, 0x04, AccessS3SaveWidth16, GnbLibGetHeader (Gfx));
+ return AGESA_SUCCESS;
+}
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get UMA info
+ *
+ * UMA info stored on heap by memory module
+ *
+ * @param[out] UmaInfo Pointer to UMA info structure
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GfxGetUmaInfo (
+ OUT UMA_INFO *UmaInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UMA_INFO *MemUmaInfo;
+
+ MemUmaInfo = GnbLocateHeapBuffer (AMD_UMA_INFO_HANDLE, StdHeader);
+ if (MemUmaInfo == NULL) {
+ LibAmdMemFill (UmaInfo, 0x00, sizeof (UMA_INFO), StdHeader);
+ UmaInfo->UmaMode = UMA_NONE;
+ } else {
+ LibAmdMemCopy (UmaInfo, MemUmaInfo, sizeof (UMA_INFO), StdHeader);
+ if ((UmaInfo->UmaBase == 0) || (UmaInfo->UmaSize == 0)) {
+ UmaInfo->UmaMode = UMA_NONE;
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Locate UMA configuration data
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @param[in,out] Gfx Pointer to GFX configuration
+ * @retval AGESA_STATUS Data located
+ * @retval AGESA_FATA Data not found
+ */
+
+AGESA_STATUS
+GfxLocateConfigData (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT GFX_PLATFORM_CONFIG **Gfx
+ )
+{
+ *Gfx = GnbLocateHeapBuffer (AMD_GFX_PLATFORM_CONFIG_HANDLE, StdHeader);
+ if (*Gfx == NULL) {
+ IDS_ERROR_TRAP;
+ return AGESA_FATAL;
+ }
+ (*Gfx)->StdHeader = (PVOID) StdHeader;
+ return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Debug dump
+ *
+ *
+ *
+ * @param[in] Gfx Pointer to GFX configuration
+ */
+
+VOID
+GfxConfigDebugDump (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ IDS_HDT_CONSOLE (GFX_MISC, "<-------------- GFX Config Start ------------->\n");
+ IDS_HDT_CONSOLE (GFX_MISC, " HD Audio - %s\n", (Gfx->GnbHdAudio == 0) ? "Disabled" : "Enabled");
+ IDS_HDT_CONSOLE (GFX_MISC, " DynamicRefreshRate - 0x%x\n", Gfx->DynamicRefreshRate);
+ IDS_HDT_CONSOLE (GFX_MISC, " LcdBackLightControl - 0x%x\n", Gfx->LcdBackLightControl);
+ IDS_HDT_CONSOLE (GFX_MISC, " AbmSupport - %s\n", (Gfx->AbmSupport == 0) ? "Disabled" : "Enabled");
+ IDS_HDT_CONSOLE (GFX_MISC, " GmcPowerGating - %s\n",
+ (Gfx->GmcPowerGating == GmcPowerGatingDisabled) ? "Disabled" : (
+ (Gfx->GmcPowerGating == GmcPowerGatingStutterOnly) ? "GmcPowerGatingStutterOnly" : (
+ (Gfx->GmcPowerGating == GmcPowerGatingWithStutter) ? "GmcPowerGatingWithStutter" : "Unknown"))
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " UmaSteering - %s\n",
+ (Gfx->UmaSteering == 0) ? "0" : (
+ (Gfx->UmaSteering == SystemTrafficOnion) ? "SystemTrafficOnion" : (
+ (Gfx->UmaSteering == Onion) ? "Onion" : (
+ (Gfx->UmaSteering == 3) ? "Unknown" : "Unknown")))
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " iGpuVgaMode - %s\n",
+ (Gfx->iGpuVgaMode == iGpuVgaAdapter) ? "VGA" : (
+ (Gfx->iGpuVgaMode == iGpuVgaNonAdapter) ? "Non VGA" : "Unknown")
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " UmaMode - %s\n", (Gfx->UmaInfo.UmaMode == UMA_NONE) ? "No UMA" : "UMA");
+ if (Gfx->UmaInfo.UmaMode != UMA_NONE) {
+ IDS_HDT_CONSOLE (GFX_MISC, " UmaBase - 0x%x\n", Gfx->UmaInfo.UmaBase);
+ IDS_HDT_CONSOLE (GFX_MISC, " UmaSize - 0x%x\n", Gfx->UmaInfo.UmaSize);
+ IDS_HDT_CONSOLE (GFX_MISC, " UmaAttributes - 0x%x\n", Gfx->UmaInfo.UmaAttributes);
+ }
+ IDS_HDT_CONSOLE (GFX_MISC, "<-------------- GFX Config End --------------->\n");
+
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigLib.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigLib.h
new file mode 100644
index 0000000..6c16a88
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigLib.h
@@ -0,0 +1,71 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize GFX configuration data structure.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GFXCONFIGLIB_H_
+#define _GFXCONFIGLIB_H_
+
+VOID
+GfxConfigDebugDump (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+VOID
+GfxGetUmaInfo (
+ OUT UMA_INFO *UmaInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GfxLocateConfigData (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT GFX_PLATFORM_CONFIG **Gfx
+ );
+
+AGESA_STATUS
+GfxEnableGmmAccess (
+ IN OUT GFX_PLATFORM_CONFIG *Gfx
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigMid.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigMid.c
new file mode 100644
index 0000000..9cc594e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigMid.c
@@ -0,0 +1,113 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize GFX configuration data structure.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbCommonLib.h"
+#include "GnbGfxConfig.h"
+#include "GfxConfigLib.h"
+#include "OptionGnb.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGMID_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GfxConfigMidInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Update GFX config info at ENV
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS Always succeeds
+ */
+
+AGESA_STATUS
+GfxConfigMidInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ AMD_MID_PARAMS *MidParamsPtr;
+ GFX_PLATFORM_CONFIG *Gfx;
+ AGESA_STATUS Status;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxConfigMidInterface Enter\n");
+ Status = GfxLocateConfigData (StdHeader, &Gfx);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ MidParamsPtr = (AMD_MID_PARAMS *) StdHeader;
+ Gfx->iGpuVgaMode = MidParamsPtr->GnbMidConfiguration.iGpuVgaMode;
+ }
+ GNB_DEBUG_CODE (
+ GfxConfigDebugDump (Gfx);
+ );
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxConfigMidInterface Exit [0x%x]\n", Status);
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigPost.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigPost.c
new file mode 100644
index 0000000..d7c2207
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GfxConfigPost.c
@@ -0,0 +1,135 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize GFX configuration data structure.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 86709 $ @e \$Date: 2013-01-24 17:39:09 -0600 (Thu, 24 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbCommonLib.h"
+#include "GfxConfigLib.h"
+#include "OptionGnb.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBGFXCONFIG_GFXCONFIGPOST_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GfxConfigPostInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Allocate UMA configuration data
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS Always succeeds
+ */
+
+AGESA_STATUS
+GfxConfigPostInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GFX_PLATFORM_CONFIG *Gfx;
+ AMD_POST_PARAMS *PostParamsPtr;
+ AGESA_STATUS Status;
+ PostParamsPtr = (AMD_POST_PARAMS *)StdHeader;
+ Status = AGESA_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxConfigPostInterface Enter\n");
+ Gfx = GnbAllocateHeapBuffer (AMD_GFX_PLATFORM_CONFIG_HANDLE, sizeof (GFX_PLATFORM_CONFIG), StdHeader);
+ ASSERT (Gfx != NULL);
+ if (Gfx != NULL) {
+ LibAmdMemFill (Gfx, 0x00, sizeof (GFX_PLATFORM_CONFIG), StdHeader);
+ if (GnbBuildOptions.IgfxModeAsPcieEp) {
+ Gfx->GfxControllerMode = GfxControllerPcieEndpointMode;
+ Gfx->GfxPciAddress.AddressValue = MAKE_SBDFO (0, 0, 1, 0, 0);
+ } else {
+ Gfx->GfxControllerMode = GfxControllerLegacyBridgeMode;
+ Gfx->GfxPciAddress.AddressValue = MAKE_SBDFO (0, 1, 5, 0, 0);
+ }
+ Gfx->StdHeader = (PVOID) StdHeader;
+ Gfx->GnbHdAudio = PostParamsPtr->PlatformConfig.GnbHdAudio;
+ Gfx->AbmSupport = PostParamsPtr->PlatformConfig.AbmSupport;
+ Gfx->DynamicRefreshRate = PostParamsPtr->PlatformConfig.DynamicRefreshRate;
+ Gfx->LcdBackLightControl = PostParamsPtr->PlatformConfig.LcdBackLightControl;
+ Gfx->AmdPlatformType = UserOptions.CfgAmdPlatformType;
+ Gfx->GmcPowerGating = GnbBuildOptions.GmcPowerGating;
+ Gfx->UmaSteering = GnbBuildOptions.CfgUmaSteering;
+ GNB_DEBUG_CODE (
+ GfxConfigDebugDump (Gfx);
+ );
+ } else {
+ Status = AGESA_ERROR;
+ }
+ IDS_OPTION_HOOK (IDS_GNB_PLATFORMCFG_OVERRIDE, Gfx, StdHeader);
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxConfigPostInterface Exit [0x%x]\n", Status);
+ return Status;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GnbGfxConfig.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GnbGfxConfig.h
new file mode 100644
index 0000000..ac8535e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxConfig/GnbGfxConfig.h
@@ -0,0 +1,51 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize GFX configuration data structure.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBGFXCONFIG_H_
+#define _GNBGFXCONFIG_H_
+
+#include "GfxConfigLib.h"
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GfxCardInfo.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GfxCardInfo.c
new file mode 100644
index 0000000..1c281ab
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GfxCardInfo.c
@@ -0,0 +1,184 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Supporting services to collect discrete GFX card info
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbCommonLib.h"
+#include "GfxCardInfo.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXCARDINFO_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef struct {
+ GNB_PCI_SCAN_DATA ScanData;
+ GFX_CARD_CARD_INFO *GfxCardInfo;
+ PCI_ADDR BaseBridge;
+ UINT8 BusNumber;
+} GFX_SCAN_DATA;
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+SCAN_STATUS
+GfxScanPcieDevice (
+ IN PCI_ADDR Device,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ );
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get information about all discrete GFX card in system
+ *
+ *
+ *
+ * @param[out] GfxCardInfo Pointer to GFX card info structure
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GfxGetDiscreteCardInfo (
+ OUT GFX_CARD_CARD_INFO *GfxCardInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GFX_SCAN_DATA GfxScanData;
+ PCI_ADDR Start;
+ PCI_ADDR End;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxGetDiscreteCardInfo Enter\n");
+ Start.AddressValue = MAKE_SBDFO (0, 0, 2, 0, 0);
+ End.AddressValue = MAKE_SBDFO (0, 0, 0x1f, 7, 0);
+ GfxScanData.BusNumber = 5;
+ GfxScanData.ScanData.GnbScanCallback = GfxScanPcieDevice;
+ GfxScanData.ScanData.StdHeader = StdHeader;
+ GfxScanData.GfxCardInfo = GfxCardInfo;
+ GnbLibPciScan (Start, End, &GfxScanData.ScanData);
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxGetDiscreteCardInfo Exit\n");
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Evaluate device
+ *
+ *
+ *
+ * @param[in] Device PCI Address
+ * @param[in,out] ScanData Scan configuration data
+ * @retval Scan Status of 0
+ */
+
+SCAN_STATUS
+GfxScanPcieDevice (
+ IN PCI_ADDR Device,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ )
+{
+ UINT8 ClassCode;
+ UINT32 VendorId;
+
+ IDS_HDT_CONSOLE (GFX_MISC, " Evaluate device [%d:%d:%d]\n",
+ Device.Address.Bus, Device.Address.Device, Device.Address.Function
+ );
+
+ if (GnbLibPciIsBridgeDevice (Device.AddressValue, ScanData->StdHeader)) {
+ UINT32 SaveBusConfiguration;
+ UINT32 Value;
+
+ if (Device.Address.Bus == 0) {
+ ((GFX_SCAN_DATA *) ScanData)->BaseBridge = Device;
+ }
+ GnbLibPciRead (Device.AddressValue | 0x18, AccessWidth32, &SaveBusConfiguration, ScanData->StdHeader);
+ Value = (((0xFF << 8) | ((GFX_SCAN_DATA *) ScanData)->BusNumber) << 8) | Device.Address.Bus;
+ GnbLibPciWrite (Device.AddressValue | 0x18, AccessWidth32, &Value, ScanData->StdHeader);
+ ((GFX_SCAN_DATA *) ScanData)->BusNumber++;
+
+ GnbLibPciScanSecondaryBus (Device, ScanData);
+
+ ((GFX_SCAN_DATA *) ScanData)->BusNumber--;
+ GnbLibPciWrite (Device.AddressValue | 0x18, AccessWidth32, &SaveBusConfiguration, ScanData->StdHeader);
+ return 0;
+ }
+ GnbLibPciRead (Device.AddressValue | 0x0b, AccessWidth8, &ClassCode, ScanData->StdHeader);
+ if (ClassCode == 3) {
+ IDS_HDT_CONSOLE (GFX_MISC, " Found GFX Card\n"
+ );
+
+ GnbLibPciRead (Device.AddressValue | 0x00, AccessWidth32, &VendorId, ScanData->StdHeader);
+ if (!GnbLibPciIsPcieDevice (Device.AddressValue, ScanData->StdHeader)) {
+ IDS_HDT_CONSOLE (GFX_MISC, " GFX Card is PCI device\n"
+ );
+ ((GFX_SCAN_DATA *) ScanData)->GfxCardInfo->PciGfxCardBitmap |= (1 << ((GFX_SCAN_DATA *) ScanData)->BaseBridge.Address.Device);
+ return 0;
+ }
+ if ((UINT16) VendorId == 0x1002) {
+ IDS_HDT_CONSOLE (GFX_MISC, " GFX Card is AMD PCIe device\n"
+ );
+ ((GFX_SCAN_DATA *) ScanData)->GfxCardInfo->AmdPcieGfxCardBitmap |= (1 << ((GFX_SCAN_DATA *) ScanData)->BaseBridge.Address.Device);
+ }
+ ((GFX_SCAN_DATA *) ScanData)->GfxCardInfo->PcieGfxCardBitmap |= (1 << ((GFX_SCAN_DATA *) ScanData)->BaseBridge.Address.Device);
+ }
+ return 0;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GfxCardInfo.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GfxCardInfo.h
new file mode 100644
index 0000000..7718231
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GfxCardInfo.h
@@ -0,0 +1,56 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Supporting services to collect discrete GFX card info
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+#ifndef _GFXCARDINFO_H_
+#define _GFXCARDINFO_H_
+
+VOID
+GfxGetDiscreteCardInfo (
+ OUT GFX_CARD_CARD_INFO *GfxCardInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GfxEnumConnectors.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GfxEnumConnectors.c
new file mode 100644
index 0000000..c9c9166
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GfxEnumConnectors.c
@@ -0,0 +1,609 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to initialize Integrated Info Table
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbGfx.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbPcieConfig.h"
+#include "GnbGfxFamServices.h"
+#include "GnbRegistersCommon.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBGFXINITLIBV1_GFXENUMCONNECTORS_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+typedef struct {
+ PCIE_CONNECTOR_TYPE ConnectorType;
+ UINT8 DisplayDeviceEnum;
+ UINT16 ConnectorEnum;
+ UINT16 EncoderEnum;
+ UINT8 ConnectorIndex;
+} EXT_CONNECTOR_INFO;
+
+typedef struct {
+ UINT8 DisplayDeviceEnum;
+ UINT8 DeviceIndex;
+ UINT16 DeviceTag;
+ UINT16 DeviceAcpiEnum;
+} EXT_DISPLAY_DEVICE_INFO;
+
+typedef struct {
+ AGESA_STATUS Status;
+ UINT8 DisplayDeviceEnum;
+ UINT8 RequestedPriorityIndex;
+ UINT8 CurrentPriorityIndex;
+ PCIe_ENGINE_CONFIG *Engine;
+} CONNECTOR_ENUM_INFO;
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+GfxIntegratedEnumConnectorsForDevice (
+ IN UINT8 DisplayDeviceEnum,
+ OUT EXT_DISPLAY_PATH *DisplayPathList,
+ IN OUT PCIe_PLATFORM_CONFIG *Pcie,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+VOID
+GfxIntegratedDebugDumpDisplayPath (
+ IN EXT_DISPLAY_PATH *DisplayPath,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+AGESA_STATUS
+GfxIntegratedEnumerateAllConnectors (
+ OUT EXT_DISPLAY_PATH *DisplayPathList,
+ IN OUT PCIe_PLATFORM_CONFIG *Pcie,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+VOID
+GfxIntegratedCopyDisplayInfo (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ OUT EXT_DISPLAY_PATH *DisplayPath,
+ OUT EXT_DISPLAY_PATH *SecondaryDisplayPath,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+EXT_CONNECTOR_INFO ConnectorInfoTable[] = {
+ {
+ ConnectorTypeDP,
+ DEVICE_DFP,
+ CONNECTOR_DISPLAYPORT_ENUM,
+ ENCODER_NOT_PRESENT,
+ 0,
+ },
+ {
+ ConnectorTypeEDP,
+ DEVICE_LCD,
+ CONNECTOR_eDP_ENUM,
+ ENCODER_NOT_PRESENT,
+ 1
+ },
+ {
+ ConnectorTypeSingleLinkDVI,
+ DEVICE_DFP,
+ CONNECTOR_SINGLE_LINK_DVI_D_ENUM,
+ ENCODER_NOT_PRESENT,
+ 2
+ },
+ {
+ ConnectorTypeDualLinkDVI,
+ DEVICE_DFP,
+ CONNECTOR_DUAL_LINK_DVI_D_ENUM,
+ ENCODER_NOT_PRESENT,
+ 3
+ },
+ {
+ ConnectorTypeHDMI,
+ DEVICE_DFP,
+ CONNECTOR_HDMI_TYPE_A_ENUM,
+ ENCODER_NOT_PRESENT,
+ 4
+ },
+ {
+ ConnectorTypeDpToVga,
+ DEVICE_CRT,
+ CONNECTOR_VGA_ENUM,
+ ENCODER_DP2VGA_ENUM_ID1,
+ 5
+ },
+ {
+ ConnectorTypeDpToLvds,
+ DEVICE_LCD,
+ CONNECTOR_LVDS_ENUM,
+ ENCODER_DP2LVDS_ENUM_ID2,
+ 6
+ },
+ {
+ ConnectorTypeStub,
+ DEVICE_CRT,
+ CONNECTOR_VGA_ENUM,
+ ENCODER_ALMOND_ENUM_ID1,
+ 5
+ },
+ {
+ ConnectorTypeSingleLinkDviI,
+ DEVICE_DFP,
+ CONNECTOR_SINGLE_LINK_DVI_I_ENUM,
+ ENCODER_NOT_PRESENT,
+ 5
+ },
+ {
+ ConnectorTypeCrt,
+ DEVICE_CRT,
+ CONNECTOR_VGA_ENUM,
+ ENCODER_NOT_PRESENT,
+ 5
+ },
+ {
+ ConnectorTypeLvds,
+ DEVICE_LCD,
+ CONNECTOR_LVDS_ENUM,
+ ENCODER_NOT_PRESENT,
+ 6
+ },
+ {
+ ConnectorTypeEDPToLvds,
+ DEVICE_LCD,
+ CONNECTOR_eDP_ENUM,
+ ENCODER_NOT_PRESENT,
+ 1
+ },
+ {
+ ConnectorTypeEDPToLvdsSwInit,
+ DEVICE_LCD,
+ CONNECTOR_eDP_ENUM,
+ ENCODER_NOT_PRESENT,
+ 1
+ },
+ {
+ ConnectorTypeAutoDetect,
+ DEVICE_LCD,
+ CONNECTOR_LVDS_eDP_ENUM,
+ ENCODER_DP2LVDS_ENUM_ID2,
+ 7
+ },
+};
+
+UINT8 ConnectorNumerArray[] = {
+// DP eDP SDVI-D DDVI-D HDMI VGA LVDS Auto (eDP, LVDS, DP-to-LVDS)
+ 6, 1, 6, 6, 6, 1, 1, 2
+};
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enumerate all display connectors for specific display device type.
+ *
+ *
+ *
+ * @param[in] ConnectorType Connector type (see PCIe_DDI_DATA::ConnectorType).
+ * @retval Pointer to EXT_CONNECTOR_INFO
+ * @retval NULL if connector type unknown.
+ */
+STATIC EXT_CONNECTOR_INFO*
+GfxIntegratedExtConnectorInfo (
+ IN UINT8 ConnectorType
+ )
+{
+ UINTN Index;
+ for (Index = 0; Index < (sizeof (ConnectorInfoTable) / sizeof (EXT_CONNECTOR_INFO)); Index++) {
+ if (ConnectorInfoTable[Index].ConnectorType == ConnectorType) {
+ return &ConnectorInfoTable[Index];
+ }
+ }
+ return NULL;
+}
+
+EXT_DISPLAY_DEVICE_INFO DisplayDeviceInfoTable[] = {
+ {
+ DEVICE_CRT,
+ 1,
+ ATOM_DEVICE_CRT1_SUPPORT,
+ 0x100,
+ },
+ {
+ DEVICE_LCD,
+ 1,
+ ATOM_DEVICE_LCD1_SUPPORT,
+ 0x110,
+ },
+ {
+ DEVICE_DFP,
+ 1,
+ ATOM_DEVICE_DFP1_SUPPORT,
+ 0x210,
+ },
+ {
+ DEVICE_DFP,
+ 2,
+ ATOM_DEVICE_DFP2_SUPPORT,
+ 0x220,
+ },
+ {
+ DEVICE_DFP,
+ 3,
+ ATOM_DEVICE_DFP3_SUPPORT,
+ 0x230,
+ },
+ {
+ DEVICE_DFP,
+ 4,
+ ATOM_DEVICE_DFP4_SUPPORT,
+ 0x240,
+ },
+ {
+ DEVICE_DFP,
+ 5,
+ ATOM_DEVICE_DFP5_SUPPORT,
+ 0x250,
+ },
+ {
+ DEVICE_DFP,
+ 6,
+ ATOM_DEVICE_DFP6_SUPPORT,
+ 0x260,
+ }
+};
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enumerate all display connectors for specific display device type.
+ *
+ *
+ *
+ * @param[in] DisplayDeviceEnum Display device enum
+ * @param[in] DisplayDeviceIndex Display device index
+ * @retval Pointer to EXT_DISPLAY_DEVICE_INFO
+ * @retval NULL if can not get display device info
+ */
+STATIC EXT_DISPLAY_DEVICE_INFO*
+GfxIntegratedExtDisplayDeviceInfo (
+ IN UINT8 DisplayDeviceEnum,
+ IN UINT8 DisplayDeviceIndex
+ )
+{
+ UINT8 Index;
+ UINT8 LastIndex;
+ LastIndex = 0xff;
+ for (Index = 0; Index < (sizeof (DisplayDeviceInfoTable) / sizeof (EXT_DISPLAY_DEVICE_INFO)); Index++) {
+ if (DisplayDeviceInfoTable[Index].DisplayDeviceEnum == DisplayDeviceEnum) {
+ LastIndex = Index;
+ if (DisplayDeviceInfoTable[Index].DeviceIndex == DisplayDeviceIndex) {
+ return &DisplayDeviceInfoTable[Index];
+ }
+ }
+ }
+ if (DisplayDeviceEnum == DEVICE_LCD && LastIndex != 0xff) {
+ return &DisplayDeviceInfoTable[LastIndex];
+ }
+ return NULL;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enumerate all display connectors
+ *
+ *
+ *
+ * @param[out] DisplayPathList Display path list
+ * @param[in,out] Pcie PCIe platform configuration info
+ * @param[in] Gfx Gfx configuration info
+ */
+AGESA_STATUS
+GfxIntegratedEnumerateAllConnectors (
+ OUT EXT_DISPLAY_PATH *DisplayPathList,
+ IN OUT PCIe_PLATFORM_CONFIG *Pcie,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS Status;
+ AgesaStatus = AGESA_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntegratedEnumerateAllConnectors Enter\n");
+ Status = GfxIntegratedEnumConnectorsForDevice (
+ DEVICE_DFP,
+ DisplayPathList,
+ Pcie,
+ Gfx
+ );
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ Status = GfxIntegratedEnumConnectorsForDevice (
+ DEVICE_CRT,
+ DisplayPathList,
+ Pcie,
+ Gfx
+ );
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ Status = GfxIntegratedEnumConnectorsForDevice (
+ DEVICE_LCD,
+ DisplayPathList,
+ Pcie,
+ Gfx
+ );
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntegratedEnumerateAllConnectors Exit [0x%x]\n", Status);
+ return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enumerate all display connectors for specific display device type.
+ *
+ *
+ *
+ * @param[in] Engine Engine configuration info
+ * @param[in,out] Buffer Buffer pointer
+ * @param[in] Pcie PCIe configuration info
+ */
+VOID
+STATIC
+GfxIntegratedDdiInterfaceCallback (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ CONNECTOR_ENUM_INFO *ConnectorEnumInfo;
+ EXT_CONNECTOR_INFO *ExtConnectorInfo;
+ ConnectorEnumInfo = (CONNECTOR_ENUM_INFO*) Buffer;
+ ExtConnectorInfo = GfxIntegratedExtConnectorInfo (Engine->Type.Ddi.DdiData.ConnectorType);
+ if (ExtConnectorInfo == NULL) {
+ AGESA_STATUS_UPDATE (AGESA_ERROR, ConnectorEnumInfo->Status);
+ PcieConfigDisableEngine (Engine);
+ return;
+ }
+ if (ExtConnectorInfo->DisplayDeviceEnum != ConnectorEnumInfo->DisplayDeviceEnum) {
+ //Not device type we are looking for
+ return;
+ }
+ if (Engine->Type.Ddi.DisplayPriorityIndex >= ConnectorEnumInfo->RequestedPriorityIndex &&
+ Engine->Type.Ddi.DisplayPriorityIndex < ConnectorEnumInfo->CurrentPriorityIndex) {
+ ConnectorEnumInfo->CurrentPriorityIndex = Engine->Type.Ddi.DisplayPriorityIndex;
+ ConnectorEnumInfo->Engine = Engine;
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enumerate all display connectors for specific display device type.
+ *
+ *
+ *
+ * @param[in] DisplayDeviceEnum Display device list
+ * @param[out] DisplayPathList Display path list
+ * @param[in,out] Pcie PCIe configuration info
+ * @param[in] Gfx Gfx configuration info
+ */
+AGESA_STATUS
+GfxIntegratedEnumConnectorsForDevice (
+ IN UINT8 DisplayDeviceEnum,
+ OUT EXT_DISPLAY_PATH *DisplayPathList,
+ IN OUT PCIe_PLATFORM_CONFIG *Pcie,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT8 DisplayDeviceIndex;
+ CONNECTOR_ENUM_INFO ConnectorEnumInfo;
+ EXT_CONNECTOR_INFO *ExtConnectorInfo;
+ EXT_DISPLAY_DEVICE_INFO *ExtDisplayDeviceInfo;
+ AGESA_STATUS Status;
+ UINT8 ConnectorIdArray[sizeof (ConnectorNumerArray)];
+ ConnectorEnumInfo.Status = AGESA_SUCCESS;
+ DisplayDeviceIndex = 1;
+ ConnectorEnumInfo.RequestedPriorityIndex = 0;
+ ConnectorEnumInfo.DisplayDeviceEnum = DisplayDeviceEnum;
+ LibAmdMemFill (ConnectorIdArray, 0x00, sizeof (ConnectorIdArray), GnbLibGetHeader (Gfx));
+ do {
+ ConnectorEnumInfo.Engine = NULL;
+ ConnectorEnumInfo.CurrentPriorityIndex = 0xff;
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_VIRTUAL | DESCRIPTOR_DDI_ENGINE,
+ GfxIntegratedDdiInterfaceCallback,
+ &ConnectorEnumInfo,
+ Pcie
+ );
+ if (ConnectorEnumInfo.Engine == NULL) {
+ break; // No more connector support this
+ }
+ ConnectorEnumInfo.RequestedPriorityIndex = ConnectorEnumInfo.CurrentPriorityIndex + 1;
+ ExtConnectorInfo = GfxIntegratedExtConnectorInfo (ConnectorEnumInfo.Engine->Type.Ddi.DdiData.ConnectorType);
+ ASSERT (ExtConnectorInfo != NULL);
+ ASSERT (ExtConnectorInfo->ConnectorIndex < sizeof (ConnectorIdArray));
+ if (ConnectorIdArray[ExtConnectorInfo->ConnectorIndex] >= ConnectorNumerArray[ExtConnectorInfo->ConnectorIndex]) {
+ //Run out of supported connectors
+ AGESA_STATUS_UPDATE (AGESA_ERROR, ConnectorEnumInfo.Status);
+ PcieConfigDisableEngine (ConnectorEnumInfo.Engine);
+ continue;
+ }
+ ConnectorEnumInfo.Engine->Type.Ddi.ConnectorId = ConnectorIdArray[ExtConnectorInfo->ConnectorIndex] + 1;
+ ExtDisplayDeviceInfo = GfxIntegratedExtDisplayDeviceInfo (DisplayDeviceEnum, DisplayDeviceIndex);
+ if (ExtDisplayDeviceInfo == NULL) {
+ //Run out of supported display device types
+ AGESA_STATUS_UPDATE (AGESA_ERROR, ConnectorEnumInfo.Status);
+ Status = AGESA_ERROR;
+ PcieConfigDisableEngine (ConnectorEnumInfo.Engine);
+ }
+
+ if ((Gfx->Gnb3dStereoPinIndex != 0) && (ConnectorEnumInfo.Engine->Type.Ddi.DdiData.HdpIndex == (Gfx->Gnb3dStereoPinIndex - 1))) {
+ AGESA_STATUS_UPDATE (AGESA_ERROR, ConnectorEnumInfo.Status);
+ Status = AGESA_ERROR;
+ PcieConfigDisableEngine (ConnectorEnumInfo.Engine);
+ }
+
+ ConnectorEnumInfo.Engine->Type.Ddi.DisplayDeviceId = DisplayDeviceIndex;
+
+ Status = GfxFmMapEngineToDisplayPath (ConnectorEnumInfo.Engine, DisplayPathList, Gfx);
+ AGESA_STATUS_UPDATE (Status, ConnectorEnumInfo.Status);
+ if (Status != AGESA_SUCCESS) {
+ continue;
+ }
+ ConnectorIdArray[ExtConnectorInfo->ConnectorIndex]++;
+ DisplayDeviceIndex++;
+ } while (ConnectorEnumInfo.Engine != NULL);
+ return ConnectorEnumInfo.Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize display path for given engine
+ *
+ *
+ *
+ * @param[in] Engine Engine configuration info
+ * @param[out] DisplayPath Display path list
+ * @param[out] SecondaryDisplayPath Secondary display path list
+ * @param[in] Gfx Gfx configuration info
+ */
+
+VOID
+GfxIntegratedCopyDisplayInfo (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ OUT EXT_DISPLAY_PATH *DisplayPath,
+ OUT EXT_DISPLAY_PATH *SecondaryDisplayPath,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ EXT_CONNECTOR_INFO *ExtConnectorInfo;
+ EXT_DISPLAY_DEVICE_INFO *ExtDisplayDeviceInfo;
+ ExtConnectorInfo = GfxIntegratedExtConnectorInfo (Engine->Type.Ddi.DdiData.ConnectorType);
+ ExtDisplayDeviceInfo = GfxIntegratedExtDisplayDeviceInfo (ExtConnectorInfo->DisplayDeviceEnum, Engine->Type.Ddi.DisplayDeviceId);
+ DisplayPath->usDeviceConnector = ExtConnectorInfo->ConnectorEnum | (Engine->Type.Ddi.ConnectorId << 8);
+ DisplayPath->usDeviceTag = ExtDisplayDeviceInfo->DeviceTag;
+ DisplayPath->usDeviceACPIEnum = ExtDisplayDeviceInfo->DeviceAcpiEnum;
+ DisplayPath->ucExtAUXDDCLutIndex = Engine->Type.Ddi.DdiData.AuxIndex;
+ DisplayPath->ucExtHPDPINLutIndex = Engine->Type.Ddi.DdiData.HdpIndex;
+ DisplayPath->ucChPNInvert = Engine->Type.Ddi.DdiData.LanePnInversionMask;
+ DisplayPath->usCaps = Engine->Type.Ddi.DdiData.Flags;
+ DisplayPath->usExtEncoderObjId = ExtConnectorInfo->EncoderEnum;
+ if (Engine->Type.Ddi.DdiData.Mapping[0].ChannelMappingValue == 0) {
+ DisplayPath->ChannelMapping.ucChannelMapping = (Engine->EngineData.StartLane < Engine->EngineData.EndLane) ? 0xE4 : 0x1B;
+ } else {
+ DisplayPath->ChannelMapping.ucChannelMapping = Engine->Type.Ddi.DdiData.Mapping[0].ChannelMappingValue;
+ }
+ GNB_DEBUG_CODE (
+ GfxIntegratedDebugDumpDisplayPath (DisplayPath, Gfx);
+ );
+ if (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeDualLinkDVI) {
+ if (SecondaryDisplayPath != NULL) {
+ SecondaryDisplayPath->usDeviceConnector = DisplayPath->usDeviceConnector;
+ }
+ GNB_DEBUG_CODE (
+ GfxIntegratedDebugDumpDisplayPath (DisplayPath, Gfx);
+ );
+
+ if (Engine->Type.Ddi.DdiData.Mapping[1].ChannelMappingValue == 0) {
+ DisplayPath->ChannelMapping.ucChannelMapping = (Engine->EngineData.StartLane < Engine->EngineData.EndLane) ? 0xE4 : 0x1B;
+ } else {
+ DisplayPath->ChannelMapping.ucChannelMapping = Engine->Type.Ddi.DdiData.Mapping[1].ChannelMappingValue;
+ }
+ }
+}
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Dump display path settings
+ *
+ *
+ *
+ * @param[in] DisplayPath Display path
+ * @param[in] Gfx Gfx configuration
+ */
+
+VOID
+GfxIntegratedDebugDumpDisplayPath (
+ IN EXT_DISPLAY_PATH *DisplayPath,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ IDS_HDT_CONSOLE (GFX_MISC, " usDeviceConnector = 0x%x\n",
+ DisplayPath->usDeviceConnector
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " usDeviceTag = 0x%x\n",
+ DisplayPath->usDeviceTag
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " usDeviceACPIEnum = 0x%x\n",
+ DisplayPath->usDeviceACPIEnum
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " usExtEncoderObjId = 0x%x\n",
+ DisplayPath->usExtEncoderObjId
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " ucChannelMapping = 0x%x\n",
+ DisplayPath->ChannelMapping.ucChannelMapping
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " ucChPNInvert = 0x%x\n",
+ DisplayPath->ucChPNInvert
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " usCaps = 0x%x\n",
+ DisplayPath->usCaps
+ );
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GfxEnumConnectors.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GfxEnumConnectors.h
new file mode 100644
index 0000000..20cf17e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GfxEnumConnectors.h
@@ -0,0 +1,64 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to initialize Integrated Info Table
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GFXENUMCONNECTORS_H_
+#define _GFXENUMCONNECTORS_H_
+
+
+VOID
+GfxIntegratedCopyDisplayInfo (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ OUT EXT_DISPLAY_PATH *DisplayPath,
+ OUT EXT_DISPLAY_PATH *SecondaryDisplayPath,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+AGESA_STATUS
+GfxIntegratedEnumerateAllConnectors (
+ OUT EXT_DISPLAY_PATH *DisplayPathList,
+ IN OUT PCIe_PLATFORM_CONFIG *Pcie,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GnbGfxInitLibV1.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GnbGfxInitLibV1.c
new file mode 100644
index 0000000..f874e08
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GnbGfxInitLibV1.c
@@ -0,0 +1,217 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Supporting services to collect discrete GFX card info
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbCommonLib.h"
+#include "GfxCardInfo.h"
+#include "GnbRegistersCommon.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBGFXINITLIBV1_GNBGFXINITLIBV1_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+BOOLEAN
+GfxLibIsControllerPresent (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GfxLibCopyMemToFb (
+ IN VOID *Source,
+ IN UINT32 FbOffset,
+ IN UINT32 Length,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+VOID
+GfxLibSetiGpuVgaMode (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+AGESA_STATUS
+GfxInitSsid (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval TRUE Gfx controller present and available
+ */
+BOOLEAN
+GfxLibIsControllerPresent (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return GnbLibPciIsDevicePresent (MAKE_SBDFO (0, 0, 1, 0, 0), StdHeader);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init Gfx SSID Registers
+ *
+ *
+ *
+ * @param[in] Gfx Pointer to global GFX configuration
+ * @retval AGESA_STATUS Always succeeds
+ */
+
+AGESA_STATUS
+GfxInitSsid (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ AGESA_STATUS Status;
+ UINT32 TempData;
+ PCI_ADDR IgpuAddress;
+ PCI_ADDR HdaudioAddress;
+
+ Status = AGESA_SUCCESS;
+ TempData = 0;
+
+ IgpuAddress = Gfx->GfxPciAddress;
+ HdaudioAddress = Gfx->GfxPciAddress;
+ HdaudioAddress.Address.Function = 1;
+
+ // Set SSID for internal GPU
+ if (UserOptions.CfgGnbIGPUSSID != 0) {
+ GnbLibPciRMW ((IgpuAddress.AddressValue | 0x4C), AccessS3SaveWidth32, 0, UserOptions.CfgGnbIGPUSSID, GnbLibGetHeader (Gfx));
+ } else {
+ GnbLibPciRead (IgpuAddress.AddressValue, AccessS3SaveWidth32, &TempData, GnbLibGetHeader (Gfx));
+ GnbLibPciRMW ((IgpuAddress.AddressValue | 0x4C), AccessS3SaveWidth32, 0, TempData, GnbLibGetHeader (Gfx));
+ }
+
+ // Set SSID for internal HD Audio
+ if (UserOptions.CfgGnbHDAudioSSID != 0) {
+ GnbLibPciRMW ((HdaudioAddress.AddressValue | 0x4C), AccessS3SaveWidth32, 0, UserOptions.CfgGnbHDAudioSSID, GnbLibGetHeader (Gfx));
+ } else {
+ GnbLibPciRead (HdaudioAddress.AddressValue, AccessS3SaveWidth32, &TempData, GnbLibGetHeader (Gfx));
+ GnbLibPciRMW ((HdaudioAddress.AddressValue | 0x4C), AccessS3SaveWidth32, 0, TempData, GnbLibGetHeader (Gfx));
+ }
+
+ return Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Copy memory content to FB
+ *
+ *
+ * @param[in] Source Pointer to source
+ * @param[in] FbOffset FB offset
+ * @param[in] Length The length to copy
+ * @param[in] Gfx Pointer to global GFX configuration
+ *
+ */
+VOID
+GfxLibCopyMemToFb (
+ IN VOID *Source,
+ IN UINT32 FbOffset,
+ IN UINT32 Length,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ GMMx00_STRUCT GMMx00;
+ GMMx04_STRUCT GMMx04;
+ UINT32 Index;
+ for (Index = 0; Index < Length; Index = Index + 4 ) {
+ GMMx00.Value = 0x80000000 | (FbOffset + Index);
+ GMMx04.Value = *(UINT32*) ((UINT8*)Source + Index);
+ GnbLibMemWrite (Gfx->GmmBase + GMMx00_ADDRESS, AccessWidth32, &GMMx00.Value, GnbLibGetHeader (Gfx));
+ GnbLibMemWrite (Gfx->GmmBase + GMMx04_ADDRESS, AccessWidth32, &GMMx04.Value, GnbLibGetHeader (Gfx));
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set iGpu VGA mode
+ *
+ *
+ * @param[in] Gfx Pointer to global GFX configuration
+ *
+ */
+VOID
+GfxLibSetiGpuVgaMode (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ GnbLibPciIndirectRMW (
+ GNB_SBDFO | D0F0x60_ADDRESS,
+ D0F0x64_x1D_ADDRESS | IOC_WRITE_ENABLE,
+ AccessS3SaveWidth32,
+ (UINT32) ~D0F0x64_x1D_VgaEn_MASK,
+ ((Gfx->iGpuVgaMode == iGpuVgaAdapter) ? 1 : 0) << D0F0x64_x1D_VgaEn_OFFSET,
+ GnbLibGetHeader (Gfx)
+ );
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GnbGfxInitLibV1.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GnbGfxInitLibV1.h
new file mode 100644
index 0000000..cc1d782
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxInitLibV1/GnbGfxInitLibV1.h
@@ -0,0 +1,79 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Gfx Library
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+#ifndef _GNBGFXINITLIBV1_H_
+#define _GNBGFXINITLIBV1_H_
+
+#include "GnbPcie.h"
+#include "GnbGfx.h"
+#include "GfxEnumConnectors.h"
+#include "GfxCardInfo.h"
+
+BOOLEAN
+GfxLibIsControllerPresent (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GfxInitSsid (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+
+VOID
+GfxLibCopyMemToFb (
+ IN VOID *Source,
+ IN UINT32 FbOffset,
+ IN UINT32 Length,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+VOID
+GfxLibSetiGpuVgaMode (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxIntegratedInfoTable.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxIntegratedInfoTable.c
new file mode 100644
index 0000000..7b5f3ef
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxIntegratedInfoTable.c
@@ -0,0 +1,504 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Integrated table info init
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Gnb.h"
+#include "GnbF1Table.h"
+#include "GnbPcie.h"
+#include "GnbGfx.h"
+#include "GnbSbLib.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbGfxConfig.h"
+#include "GnbGfxInitLibV1.h"
+#include "GnbGfxFamServices.h"
+#include "GnbNbInitLibV1.h"
+#include "GnbNbInitLibV5.h"
+#include "GfxConfigLib.h"
+#include "GfxIntegratedInfoTable.h"
+#include "GfxPwrPlayTable.h"
+#include "OptionGnb.h"
+#include "GfxLibV3.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBGFXINTTABLEV3_GFXINTEGRATEDINFOTABLE_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init V3 Support for eDP to Lvds translators
+ *
+ *
+ * @param[in] Engine Engine configuration info
+ * @param[in,out] Buffer Buffer pointer
+ * @param[in] Pcie PCIe configuration info
+ */
+VOID
+STATIC
+GfxIntegrateducEDPToLVDSRxIdCallback (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 *uceDPToLVDSRxId;
+ uceDPToLVDSRxId = (UINT8*) Buffer;
+ // APU output DP signal to a 3rd party DP translator chip (Analogix, Parade etc),
+ // the chip is handled by the 3rd party DP Rx firmware and it does not require the AMD SW to have a special
+ // initialize/enable/disable sequence to control this chip, the AMD SW just follows the eDP spec
+ // to enable the LVDS panel through this chip.
+
+ if (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeEDPToLvds) {
+ *uceDPToLVDSRxId = eDP_TO_LVDS_COMMON_ID;
+ IDS_HDT_CONSOLE (GNB_TRACE, "Found 3rd party common EDPToLvds Connector\n");
+ }
+ // APU output DP signal to a 3rd party DP translator chip which requires a AMD SW one time initialization
+ // to the chip based on the LVDS panel parameters ( such as power sequence time and panel SS parameter etc ).
+ // After that, the AMD SW does not need any specific enable/disable sequences to control this chip and just
+ // follows the eDP spec. to control the panel.
+ if (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeEDPToLvdsSwInit) {
+ *uceDPToLVDSRxId = eDP_TO_LVDS_SWINIT_ID;
+ IDS_HDT_CONSOLE (GNB_TRACE, "Found EDPToLvds Connector requiring SW init\n");
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Calculate V3 NCLK clock
+ *
+ *
+ *
+ * @param[in] NbFid NbFid
+ * @param[in] NbDid NbDid
+ * @retval Clock in 10KHz
+ */
+
+STATIC UINT32
+GfxLibGetNclkV3 (
+ IN UINT8 NbFid,
+ IN UINT8 NbDid
+ )
+{
+ UINT32 Divider;
+ //i.e. NBCOF[0] = (100 * ([NbFid] + 4h) / (2^[NbDid])) Mhz
+ if (NbDid == 1) {
+ Divider = 2;
+ } else if (NbDid == 0) {
+ Divider = 1;
+ } else {
+ Divider = 1;
+ }
+ ASSERT (NbDid == 0 || NbDid == 1);
+ return ((10000 * (NbFid + 4)) / Divider);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *Init V3 Nb p-State MemclkFreq
+ *
+ *
+ * @param[in] IntegratedInfoTable Integrated info table pointer
+ * @param[in] PpF1Array pointer
+ * @param[in] Gfx Gfx configuration info
+ */
+
+STATIC VOID
+GfxFillNbPstateMemclkFreqV3 (
+ IN OUT ATOM_INTEGRATED_SYSTEM_INFO_V1_8 *IntegratedInfoTable,
+ IN PP_F1_ARRAY_V2 *PpF1Array,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT8 i;
+ UINT8 Channel;
+ ULONG memps0_freq;
+ ULONG memps1_freq;
+
+ Channel = 0;
+ if ((Gfx->UmaInfo.UmaAttributes & UMA_ATTRIBUTE_ON_DCT1) != 0) {
+ Channel = 1;
+ } else if ((Gfx->UmaInfo.UmaAttributes & UMA_ATTRIBUTE_ON_DCT2) != 0) {
+ Channel = 2;
+ } else if ((Gfx->UmaInfo.UmaAttributes & UMA_ATTRIBUTE_ON_DCT3) != 0) {
+ Channel = 3;
+ }
+
+
+ memps0_freq = 100 * GfxLibExtractDramFrequencyV3 ((UINT8) PpF1Array->MemClkFreq[Channel], GnbLibGetHeader (Gfx));
+ memps1_freq = 100 * GfxLibExtractDramFrequencyV3 ((UINT8) PpF1Array->M1MemClkFreq[Channel], GnbLibGetHeader (Gfx));
+
+ for (i = 0; i < 4; i++) {
+ if (PpF1Array->PP_FUSE_ARRAY_V2_fld26[i] == 1) {
+ IntegratedInfoTable->ulNbpStateMemclkFreq[i] = (PpF1Array->PP_FUSE_ARRAY_V2_fld29[i] == 0) ? memps0_freq : memps1_freq;
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *Init V3 NbPstateVid
+ *
+ *
+ * @param[in] PpF1Array
+ * @param[in] IntegratedInfoTable Integrated info table pointer
+ * @param[in] Gfx Gfx configuration info
+ */
+
+STATIC VOID
+GfxFillNbPStateVidV3 (
+ IN PP_F1_ARRAY_V2 *PpF1Array,
+ IN OUT ATOM_INTEGRATED_SYSTEM_INFO_V1_8 *IntegratedInfoTable,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT8 i;
+
+ for (i = 0; i < 4; i++) {
+ IntegratedInfoTable->usNBPStateVoltage[i] = (USHORT) ((PpF1Array->PP_FUSE_ARRAY_V2_fld28[i] << 7) | (PpF1Array->PP_FUSE_ARRAY_V2_fld27[i]));
+ IntegratedInfoTable->ulNbpStateNClkFreq[i] = GfxLibGetNclkV3 ((UINT8) (PpF1Array->PP_FUSE_ARRAY_V2_fld30[i]), (UINT8) (PpF1Array->PP_FUSE_ARRAY_V2_fld31[i]));
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Copy memory content to FB
+ *
+ *
+ * @param[in] SystemInfoTableV3Ptr Pointer to integrated info table
+ * @param[in] Gfx Pointer to global GFX configuration
+ *
+ */
+VOID
+GfxIntInfoTablePostToFbV3 (
+ IN ATOM_FUSION_SYSTEM_INFO_V3 *SystemInfoTableV3Ptr,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT32 Index;
+ UINT32 TableOffset;
+ UINT32 FbAddress;
+ TableOffset = (UINT32) (Gfx->UmaInfo.UmaSize - sizeof (ATOM_FUSION_SYSTEM_INFO_V3)) | 0x80000000;
+ for (Index = 0; Index < sizeof (ATOM_FUSION_SYSTEM_INFO_V3); Index = Index + 4 ) {
+ FbAddress = TableOffset + Index;
+ GnbLibMemWrite (Gfx->GmmBase + GMMx00_ADDRESS, AccessWidth32, &FbAddress, GnbLibGetHeader (Gfx));
+ GnbLibMemWrite (Gfx->GmmBase + GMMx04_ADDRESS, AccessWidth32, (UINT8*) SystemInfoTableV3Ptr + Index, GnbLibGetHeader (Gfx));
+ }
+}
+
+
+STATIC VOID
+GfxIntegratedInfoTable289_fun (
+ IN PP_F1_ARRAY_V2 *PpF1Array,
+ IN ATOM_INTEGRATED_SYSTEM_INFO_V1_8 *IntegratedInfoTable,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINTN Index;
+ for (Index = 0; Index < 4; Index++) {
+ if (PpF1Array->excel841_fld6[Index] != 0) {
+ IntegratedInfoTable->ATOM_INTEGRATED_SYSTEM_INFO_V1_8_fld4[Index].ulMaximumSupportedCLK = GfxFmCalculateClock (
+ PpF1Array->excel841_fld6[Index],
+ GnbLibGetHeader (Gfx)
+ );
+ IntegratedInfoTable->ATOM_INTEGRATED_SYSTEM_INFO_V1_8_fld4[Index].ulVoltageIndex = (ULONG) Index;
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+
+STATIC VOID
+GfxIntegratedInfoTable318_fun (
+ IN PP_F1_ARRAY_V2 *PpF1Array,
+ IN ATOM_INTEGRATED_SYSTEM_INFO_V1_8 *IntegratedInfoTable,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT8 Index;
+ UINTN v1;
+ GnbGfx275_STRUCT *pv2;
+ BOOLEAN Sorting;
+ pv2 = &IntegratedInfoTable->ATOM_INTEGRATED_SYSTEM_INFO_V1_8[0];
+
+ v1 = 0;
+ for (Index = 0; Index < 5; Index++) {
+ if (PpF1Array->PP_FUSE_ARRAY_V2_fld33[Index] != 0) {
+ pv2[v1].GnbGfx275_STRUCT_fld0 = GfxFmCalculateClock (PpF1Array->PP_FUSE_ARRAY_V2_fld33[Index], GnbLibGetHeader (Gfx));
+ pv2[v1].GnbGfx275_STRUCT_fld1 = Index;
+ pv2[v1].GnbGfx275_STRUCT_fld2 = PpF1Array->PP_FUSE_ARRAY_V2_fld32[Index];
+ v1++;
+ }
+ }
+ if (v1 > 1) {
+ do {
+ Sorting = FALSE;
+ for (Index = 0; Index < (v1 - 1); Index++) {
+ GnbGfx275_STRUCT Temp;
+ BOOLEAN Exchange;
+ Exchange = FALSE;
+ if (pv2[Index].GnbGfx275_STRUCT_fld1 > pv2[Index + 1].GnbGfx275_STRUCT_fld1) {
+ Exchange = TRUE;
+ }
+ if ((pv2[Index].GnbGfx275_STRUCT_fld1 == pv2[Index + 1].GnbGfx275_STRUCT_fld1) &&
+ (pv2[Index].GnbGfx275_STRUCT_fld0 > pv2[Index + 1].GnbGfx275_STRUCT_fld0)) {
+ Exchange = TRUE;
+ }
+ if (Exchange) {
+ Sorting = TRUE;
+ LibAmdMemCopy (&Temp, &pv2[Index], sizeof (GnbGfx275_STRUCT), GnbLibGetHeader (Gfx));
+ LibAmdMemCopy (&pv2[Index], &pv2[Index + 1], sizeof (GnbGfx275_STRUCT), GnbLibGetHeader (Gfx));
+ LibAmdMemCopy (&pv2[Index + 1], &Temp, sizeof (GnbGfx275_STRUCT), GnbLibGetHeader (Gfx));
+ }
+ }
+ } while (Sorting);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Build integrated info table
+ *
+ *
+ *
+ * @param[in] Gfx Gfx configuration info
+ * @param[in] SystemInfoTableV3 ATOM_FUSION_SYSTEM_INFO_V3 pointer
+ * @param[in] PpF1Array
+ * @retval AGESA_STATUS
+ */
+AGESA_STATUS
+GfxIntInfoTableInitV3 (
+ IN GFX_PLATFORM_CONFIG *Gfx,
+ IN ATOM_FUSION_SYSTEM_INFO_V3 *SystemInfoTableV3,
+ IN PP_F1_ARRAY_V2 *PpF1Array
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ ATOM_PPLIB_POWERPLAYTABLE4 *PpTable;
+ UINT8 Channel;
+
+ AgesaStatus = AGESA_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntegratedInfoTableInitV3 Enter\n");
+
+ if (PpF1Array != NULL) {
+
+ Channel = 0;
+ if ((Gfx->UmaInfo.UmaAttributes & UMA_ATTRIBUTE_ON_DCT1) != 0) {
+ Channel = 1;
+ } else if ((Gfx->UmaInfo.UmaAttributes & UMA_ATTRIBUTE_ON_DCT2) != 0) {
+ Channel = 2;
+ } else if ((Gfx->UmaInfo.UmaAttributes & UMA_ATTRIBUTE_ON_DCT3) != 0) {
+ Channel = 3;
+ }
+ SystemInfoTableV3->sIntegratedSysInfo.sHeader.usStructureSize = sizeof (ATOM_INTEGRATED_SYSTEM_INFO_V1_8);
+ ASSERT (SystemInfoTableV3->sIntegratedSysInfo.sHeader.usStructureSize == 512);
+ SystemInfoTableV3->sIntegratedSysInfo.sHeader.ucTableFormatRevision = 1;
+ SystemInfoTableV3->sIntegratedSysInfo.sHeader.ucTableContentRevision = 8;
+ SystemInfoTableV3->sIntegratedSysInfo.ulBootUpEngineClock = 200 * 100; //Set default engine clock to 200MhZ
+ SystemInfoTableV3->sIntegratedSysInfo.field2 = (PpF1Array->PP_FUSE_ARRAY_V2_fld21 + 0x10) * 10000;
+ SystemInfoTableV3->sIntegratedSysInfo.ulBootUpUMAClock = Gfx->UmaInfo.MemClock * 100;
+
+ SystemInfoTableV3->sIntegratedSysInfo.usRequestedPWMFreqInHz = Gfx->LcdBackLightControl;
+ SystemInfoTableV3->sIntegratedSysInfo.ucUMAChannelNumber = ((Gfx->UmaInfo.UmaAttributes & UMA_ATTRIBUTE_INTERLEAVE) == 0) ? 1 : 2;
+ SystemInfoTableV3->sIntegratedSysInfo.ucMemoryType = Gfx->UmaInfo.MemType;
+ SystemInfoTableV3->sIntegratedSysInfo.usBootUpNBVoltage = GnbLocateHighestVidIndexV5 (GnbLibGetHeader (Gfx));
+ SystemInfoTableV3->sIntegratedSysInfo.usPanelRefreshRateRange = Gfx->DynamicRefreshRate;
+ SystemInfoTableV3->sIntegratedSysInfo.usLvdsSSPercentage = Gfx->LvdsSpreadSpectrum;
+ //Locate PCIe configuration data to get definitions of display connectors
+ SystemInfoTableV3->sIntegratedSysInfo.sExtDispConnInfo.sHeader.usStructureSize = sizeof (ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO);
+ SystemInfoTableV3->sIntegratedSysInfo.sExtDispConnInfo.sHeader.ucTableFormatRevision = 1;
+ SystemInfoTableV3->sIntegratedSysInfo.sExtDispConnInfo.sHeader.ucTableContentRevision = 1;
+ SystemInfoTableV3->sIntegratedSysInfo.sExtDispConnInfo.uc3DStereoPinId = Gfx->Gnb3dStereoPinIndex;
+ SystemInfoTableV3->sIntegratedSysInfo.sExtDispConnInfo.ucRemoteDisplayConfig = Gfx->GnbRemoteDisplaySupport;
+ SystemInfoTableV3->sIntegratedSysInfo.sExtDispConnInfo.ucFixDPVoltageSwing = (UINT8) Gfx->DpFixedVoltSwingType;
+ SystemInfoTableV3->sIntegratedSysInfo.usExtDispConnInfoOffset = offsetof (ATOM_INTEGRATED_SYSTEM_INFO_V1_8, sExtDispConnInfo);
+
+ SystemInfoTableV3->sIntegratedSysInfo.usPCIEClkSSPercentage = Gfx->PcieRefClkSpreadSpectrum;
+
+ SystemInfoTableV3->sIntegratedSysInfo.ucLvdsMisc = Gfx->LvdsMiscControl.Value;
+ IDS_HDT_CONSOLE (GNB_TRACE, "Lvds Misc control : %x\n", Gfx->LvdsMiscControl.Value);
+ if (Gfx->LvdsMiscControl.Field.LvdsVoltOverwriteEn) {
+ SystemInfoTableV3->sIntegratedSysInfo.ucLVDSVoltAdjust = Gfx->LVDSVoltAdjust;
+ IDS_HDT_CONSOLE (GNB_TRACE, "LVDSVoltAdjust : %x\n", Gfx->LVDSVoltAdjust);
+ }
+
+ SystemInfoTableV3->sIntegratedSysInfo.ulVBIOSMisc = Gfx->DisplayMiscControl.Value;
+ IDS_HDT_CONSOLE (GNB_TRACE, "Display Misc control : %x\n", Gfx->DisplayMiscControl.Value);
+
+ // LVDS
+ SystemInfoTableV3->sIntegratedSysInfo.ucLVDSPwrOnSeqDIGONtoDE_in4Ms = Gfx->LvdsPowerOnSeqDigonToDe;
+ SystemInfoTableV3->sIntegratedSysInfo.ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms = Gfx->LvdsPowerOnSeqDeToVaryBl;
+ SystemInfoTableV3->sIntegratedSysInfo.ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms = Gfx->LvdsPowerOnSeqVaryBlToDe;
+ SystemInfoTableV3->sIntegratedSysInfo.ucLVDSPwrOffSeqDEtoDIGON_in4Ms = Gfx->LvdsPowerOnSeqDeToDigon;
+ SystemInfoTableV3->sIntegratedSysInfo.ucLVDSOffToOnDelay_in4Ms = Gfx->LvdsPowerOnSeqOnToOffDelay;
+ SystemInfoTableV3->sIntegratedSysInfo.ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms = Gfx->LvdsPowerOnSeqVaryBlToBlon;
+ SystemInfoTableV3->sIntegratedSysInfo.ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms = Gfx->LvdsPowerOnSeqBlonToVaryBl;
+ SystemInfoTableV3->sIntegratedSysInfo.ulLCDBitDepthControlVal = Gfx->LcdBitDepthControlValue;
+ SystemInfoTableV3->sIntegratedSysInfo.usMaxLVDSPclkFreqInSingleLink = Gfx->LvdsMaxPixelClockFreq;
+ SystemInfoTableV3->sIntegratedSysInfo.ucMinAllowedBL_Level = Gfx->MinAllowedBLLevel;
+ Status = PcieLocateConfigurationData (GnbLibGetHeader (Gfx), &Pcie);
+ ASSERT (Status == AGESA_SUCCESS);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_SUCCESS) {
+ Status = GfxIntegratedEnumerateAllConnectors (
+ &SystemInfoTableV3->sIntegratedSysInfo.sExtDispConnInfo.sPath[0],
+ Pcie,
+ Gfx
+ );
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ }
+
+ SystemInfoTableV3->sIntegratedSysInfo.sExtDispConnInfo.uceDPToLVDSRxId = eDP_TO_LVDS_RX_DISABLE;
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_VIRTUAL | DESCRIPTOR_DDI_ENGINE,
+ GfxIntegrateducEDPToLVDSRxIdCallback,
+ &SystemInfoTableV3->sIntegratedSysInfo.sExtDispConnInfo.uceDPToLVDSRxId,
+ Pcie
+ );
+
+ // Build PP table
+ PpTable = (ATOM_PPLIB_POWERPLAYTABLE4*) &SystemInfoTableV3->ulPowerplayTable;
+ // Build PP table
+ ///@todo
+ //Status = GfxPowerPlayBuildTable (PpTable, Gfx);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ // Assign usFormatID to 0x000B to represent V3
+ ///@todo
+ PpTable->usFormatID = 0xB;
+ // Build Display clock info
+ GfxIntegratedInfoTable289_fun (PpF1Array, &SystemInfoTableV3->sIntegratedSysInfo, Gfx);
+ GfxIntegratedInfoTable318_fun (PpF1Array, &SystemInfoTableV3->sIntegratedSysInfo, Gfx);
+ ///@todo review if these parameters needed
+ // Fill in Nb P-state MemclkFreq Data
+ GfxFillNbPstateMemclkFreqV3 (&SystemInfoTableV3->sIntegratedSysInfo, PpF1Array, Gfx);
+ // Fill in HTC Data
+ if (PpF1Array->HtcEn == 1) {
+ SystemInfoTableV3->sIntegratedSysInfo.ucHtcTmpLmt = (UCHAR) (PpF1Array->HtcTmpLmt / 2 + 52);
+ SystemInfoTableV3->sIntegratedSysInfo.ATOM_INTEGRATED_SYSTEM_INFO_V1_8_fld11 = (UCHAR) (PpF1Array->PP_FUSE_ARRAY_V2_fld20 / 2);
+ } else {
+ SystemInfoTableV3->sIntegratedSysInfo.ucHtcTmpLmt = 0;
+ SystemInfoTableV3->sIntegratedSysInfo.ATOM_INTEGRATED_SYSTEM_INFO_V1_8_fld11 = 0;
+ }
+ // Fill in NB P states VID & NCLK info
+ GfxFillNbPStateVidV3 (PpF1Array, &SystemInfoTableV3->sIntegratedSysInfo, Gfx);
+
+ // Family specific data update - store default values to be updated by family specific code
+ //GfxFmIntegratedInfoTableInit (&SystemInfoV1Table.sIntegratedSysInfo, Gfx);
+ SystemInfoTableV3->sIntegratedSysInfo.ulDDR_DLL_PowerUpTime = 4940;
+ SystemInfoTableV3->sIntegratedSysInfo.ulDDR_PLL_PowerUpTime = 2000;
+
+ if (PpF1Array->MemPhyPllPdMode[Channel] != 0) {
+ SystemInfoTableV3->sIntegratedSysInfo.ulSystemConfig |= BIT2;
+ }
+ if (PpF1Array->DisDllShutdownSR[Channel] == 0) {
+ SystemInfoTableV3->sIntegratedSysInfo.ulSystemConfig |= BIT1;
+ }
+ if (GnbBuildOptions.CfgPciePowerGatingFlags != (PCIE_POWERGATING_SKIP_CORE | PCIE_POWERGATING_SKIP_PHY)) {
+ SystemInfoTableV3->sIntegratedSysInfo.ulSystemConfig |= BIT0;
+ }
+ SystemInfoTableV3->sIntegratedSysInfo.ulGPUCapInfo = GPUCAPINFO_TMDS_HDMI_USE_CASCADE_PLL_MODE | GPUCAPINFO_DP_USE_SINGLE_PLL_MODE;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "ulSystemConfig : %x\n", SystemInfoTableV3->sIntegratedSysInfo.ulSystemConfig);
+
+ } else {
+ Status = AGESA_ERROR;
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ }
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntegratedInfoTableInitV3 Exit [0x%x]\n", Status);
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Dump gfx integrated info table
+ *
+ *
+ * @param[in] SystemInfoTableV3Ptr Pointer to integrated info table
+ * @param[in] Gfx Pointer to global GFX configuration
+ *
+ */
+VOID
+GfxIntInfoTableDebugDumpV3 (
+ IN ATOM_FUSION_SYSTEM_INFO_V3 *SystemInfoTableV3Ptr,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ ATOM_PPLIB_POWERPLAYTABLE4 *PpTable;
+ ATOM_PPLIB_EXTENDEDHEADER *ExtendedHeader;
+
+ IDS_HDT_CONSOLE (GFX_MISC, "GfxIntInfoTableDebugDumpV3 Enter\n");
+
+ PpTable = (ATOM_PPLIB_POWERPLAYTABLE4*) &SystemInfoTableV3Ptr->ulPowerplayTable;
+ ExtendedHeader = (ATOM_PPLIB_EXTENDEDHEADER *) ((UINT8 *) (PpTable) + PpTable->usExtendendedHeaderOffset);
+ IDS_HDT_CONSOLE (GFX_MISC, " ExtendedHeader usSize %d\n", ExtendedHeader->usSize);
+ IDS_HDT_CONSOLE (GFX_MISC, " SizeOf %d\n", sizeof(ATOM_PPLIB_EXTENDEDHEADER));
+
+ IDS_HDT_CONSOLE (GFX_MISC, " ucHtcTmpLmt 0x%X\n", SystemInfoTableV3Ptr->sIntegratedSysInfo.ucHtcTmpLmt);
+ IDS_HDT_CONSOLE (GFX_MISC, " ATOM_INTEGRATED_SYSTEM_INFO_V1_8_fld11 0x%X\n", SystemInfoTableV3Ptr->sIntegratedSysInfo.ATOM_INTEGRATED_SYSTEM_INFO_V1_8_fld11);
+ IDS_HDT_CONSOLE (GFX_MISC, "GfxIntInfoTableDebugDumpV3 Exit\n");
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxIntegratedInfoTable.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxIntegratedInfoTable.h
new file mode 100644
index 0000000..562f815
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxIntegratedInfoTable.h
@@ -0,0 +1,73 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Various GfxIntegratedInfoTable definitions
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GFXINTEGRATEDINFOTABLE_H_
+#define _GFXINTEGRATEDINFOTABLE_H_
+
+AGESA_STATUS
+GfxIntInfoTableInitV3 (
+ IN GFX_PLATFORM_CONFIG *Gfx,
+ IN ATOM_FUSION_SYSTEM_INFO_V3 *SystemInfoTableV3,
+ IN PP_F1_ARRAY_V2 *PpF1Array
+ );
+
+VOID
+GfxIntInfoTablePostToFbV3 (
+ IN ATOM_FUSION_SYSTEM_INFO_V3 *SystemInfoTableV3Ptr,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+VOID
+GfxIntInfoTableDebugDumpV3 (
+ IN ATOM_FUSION_SYSTEM_INFO_V3 *SystemInfoTableV3Ptr,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+// GMMx00/x04 are required for copying table to frame buffer
+#ifndef GMMx00_ADDRESS
+ #define GMMx00_ADDRESS 0x0
+ #define GMMx04_ADDRESS 0x4
+#endif
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxLibV3.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxLibV3.c
new file mode 100644
index 0000000..1ad00c9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxLibV3.c
@@ -0,0 +1,257 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Family specific GFX library
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85947 $ @e \$Date: 2013-01-14 17:25:21 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "S3SaveState.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbGfx.h"
+#include "GfxLibV3.h"
+#include "GnbSmuInitLibV7.h"
+#include "GnbCommonLib.h"
+#include "GnbRegistersCommonV2.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBGFXINTTABLEV3_GFXLIBV3_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+CONST UINT16 GfxMemClockFrequencyDefinitionTableV3 [][8] = {
+{0, 0, 0, 0, 333, 0, 400, 0},
+{0, 0, 533, 0, 0, 0, 667, 0},
+{0, 0, 800, 0, 0, 0, 933, 0},
+{0, 1050, 1066, 0, 0, 0, 0, 0}
+};
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Extract DRAM frequency
+ *
+ *
+ *
+ * @param[in] Encoding Memory Clock Frequency Value Definition
+ * @param[in] StdHeader Standard configuration header
+ * @retval Dram frequency Mhz
+ */
+UINT32
+GfxLibExtractDramFrequencyV3 (
+ IN UINT8 Encoding,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ if (Encoding >= (sizeof (GfxMemClockFrequencyDefinitionTableV3) / sizeof (UINT16))) {
+ ASSERT (FALSE);
+ return 0;
+ }
+ return GfxMemClockFrequencyDefinitionTableV3[Encoding / 8][Encoding % 8];
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable GMM Access for gBIF BAR Arrangement
+ *
+ *
+ *
+ * @param[in,out] Gfx Pointer to GFX configuration
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GfxEnableGmmAccessV3 (
+ IN OUT GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT32 Value;
+
+ if (!GnbLibPciIsDevicePresent (Gfx->GfxPciAddress.AddressValue, GnbLibGetHeader (Gfx))) {
+ IDS_ERROR_TRAP;
+ return AGESA_ERROR;
+ }
+
+ // Check if base address for GMM allocated by reading D1F0x24 Graphics Memory Mapped Base Address
+ Gfx->GmmBase = 0;
+ GnbLibPciRead (Gfx->GfxPciAddress.AddressValue | 0x24, AccessWidth32, &Value, GnbLibGetHeader (Gfx));
+ Gfx->GmmBase |= (Value & 0xfffffff0);
+ if (Gfx->GmmBase == 0) {
+ IDS_ERROR_TRAP;
+ return AGESA_ERROR;
+ }
+
+ // Check if base address for FB allocated
+ GnbLibPciRead (Gfx->GfxPciAddress.AddressValue | 0x10, AccessWidth32, &Value, GnbLibGetHeader (Gfx));
+ if ((Value & 0xfffffff0) == 0) {
+ IDS_ERROR_TRAP;
+ return AGESA_ERROR;
+ }
+ //Push CPU MMIO pci config to S3 script
+ GnbLibS3SaveConfigSpace (MAKE_SBDFO (0, 0, 0x18, 1, 0), 0xBC, 0x80, AccessS3SaveWidth32, GnbLibGetHeader (Gfx));
+ // Turn on memory decoding on GFX to enable access to GMM register space
+ GnbLibPciRMW (Gfx->GfxPciAddress.AddressValue | 0x4, AccessWidth32, 0xffffffff, BIT1 | BIT2, GnbLibGetHeader (Gfx));
+ //Push iGPU pci config to S3 script
+ GnbLibS3SaveConfigSpace (Gfx->GfxPciAddress.AddressValue, 0x24, 0x10, AccessS3SaveWidth32, GnbLibGetHeader (Gfx));
+ GnbLibS3SaveConfigSpace (Gfx->GfxPciAddress.AddressValue, 0x04, 0x04, AccessS3SaveWidth16, GnbLibGetHeader (Gfx));
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Power Up/Down iGPU
+ *
+ *
+ *
+ * @param[in,out] Gfx Pointer to GFX configuration
+ * @param[in,out] PowerControl Control power Up/Down iGPU, 0, power down iGPU, 1, power on iGPU
+ * @retval AGESA_STATUS
+ */
+AGESA_STATUS
+GfxRequestGPUPowerV3 (
+ IN OUT GFX_PLATFORM_CONFIG *Gfx,
+ IN UINT8 PowerControl
+ )
+{
+ GNB_HANDLE *GnbHandle;
+ DEV_OBJECT DevObject;
+
+ GnbHandle = GnbGetHandle (GnbLibGetHeader (Gfx));
+ DevObject.DevPciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0);
+ DevObject.GnbHandle = GnbHandle;
+ DevObject.StdHeader = GnbLibGetHeader (Gfx);
+
+
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Determine number of audio ports for each connector
+ *
+ *
+ *
+ * @param[in] Engine Engine configuration info
+ * @param[in,out] Buffer Buffer pointer
+ * @param[in] Pcie PCIe configuration info
+ */
+VOID
+STATIC
+GfxIntAudioEpEnumCallback (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 *AudioCount;
+ AudioCount = (UINT8*) Buffer;
+ if (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeHDMI) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "Found HDMI Connector\n");
+ (*AudioCount)++;
+ } else if (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeDP) {
+ if ((Engine->Type.Ddi.DdiData.Flags & DDI_DATA_FLAGS_DP1_1_ONLY) == 0) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "Found DP1.2 Connector\n");
+ *AudioCount += 4;
+ } else {
+ IDS_HDT_CONSOLE (GNB_TRACE, "Found DP1.1 Connector\n");
+ (*AudioCount)++;
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "New AudioCount = %d\n", *AudioCount);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enumerate audio endpoint in all display connectors.
+ *
+ *
+ *
+ * @param[in] Gfx Gfx configuration info
+ * @param[in, out] AudioEPCount Total Audio endpoint number
+ * @retval AGESA_STATUS
+ */
+AGESA_STATUS
+GfxIntAudioEPEnumV3 (
+ IN GFX_PLATFORM_CONFIG *Gfx,
+ IN OUT UINT8 *AudioEPCount
+ )
+{
+ UINT8 NumAudioEp;
+ AGESA_STATUS Status;
+ PCIe_PLATFORM_CONFIG *Pcie;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntAudioEPEnumV3 Enter\n");
+
+ NumAudioEp = 0;
+ Status = PcieLocateConfigurationData (GnbLibGetHeader (Gfx), &Pcie);
+ if ((Status == AGESA_SUCCESS) && (Gfx->GnbHdAudio != 0)) {
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_DDI_ENGINE | DESCRIPTOR_VIRTUAL,
+ GfxIntAudioEpEnumCallback,
+ &NumAudioEp,
+ Pcie
+ );
+
+ if (Gfx->GnbRemoteDisplaySupport) {
+ NumAudioEp++;
+ }
+ }
+
+ *AudioEPCount = NumAudioEp;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntAudioEPEnumV3 Exit\n");
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxLibV3.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxLibV3.h
new file mode 100644
index 0000000..1c7938d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxLibV3.h
@@ -0,0 +1,70 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Various GFX service procedures
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GFXLIBV3_H_
+#define _GFXLIBV3_H_
+
+UINT32
+GfxLibExtractDramFrequencyV3 (
+ IN UINT8 Encoding,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GfxEnableGmmAccessV3 (
+ IN OUT GFX_PLATFORM_CONFIG *Gfx
+ );
+
+AGESA_STATUS
+GfxRequestGPUPowerV3 (
+ IN OUT GFX_PLATFORM_CONFIG *Gfx,
+ IN UINT8 PowerControl
+ );
+
+AGESA_STATUS
+GfxIntAudioEPEnumV3 (
+ IN GFX_PLATFORM_CONFIG *Gfx,
+ IN OUT UINT8 *AudioEPCount
+ );
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxPwrPlayTable.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxPwrPlayTable.c
new file mode 100644
index 0000000..4e83c44
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxPwrPlayTable.c
@@ -0,0 +1,1233 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to initialize Integrated Info Table
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 67269 $ @e \$Date: 2012-03-26 02:53:08 -0500 (Mon, 26 Mar 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "Gnb.h"
+#include "GnbF1Table.h"
+#include "GnbPcie.h"
+#include "GnbGfx.h"
+#include "GnbGfxFamServices.h"
+#include "GnbCommonLib.h"
+#include "GfxPwrPlayTable.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBGFXINTTABLEV3_GFXPWRPLAYTABLE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/// Software state
+typedef struct {
+ BOOLEAN Valid; ///< State valid
+ UINT16 Classification; ///< State classification
+ UINT32 CapsAndSettings; ///< State capability and settings
+ UINT16 Classification2; ///< State classification2
+ UINT32 SW_STATE_fld4;
+ UINT32 SW_STATE_fld5;
+ UINT8 SW_STATE_fld6;
+ UINT8 SW_STATE_fld7[10];
+} SW_STATE;
+
+typedef struct {
+ BOOLEAN Valid;
+ UINT32 GfxPwrPlayTable120_STRUCT_fld1;
+ UINT8 Vid;
+ UINT16 Tdp;
+} GfxPwrPlayTable120_STRUCT;
+
+typedef struct {
+ GFX_PLATFORM_CONFIG *Gfx;
+ ATOM_PPLIB_POWERPLAYTABLE4 *PpTable;
+ PP_F1_ARRAY_V2 *PpF1s;
+ SW_STATE SwStateArray [MAX_NUM_OF_SW_STATES]; ///< SW state array
+ GfxPwrPlayTable120_STRUCT PP_WORKSPACE_V2_fld4[10];
+ UINT8 NumOfClockVoltageLimitEnties; ///
+ ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_RECORD VceClockVoltageLimitArray[MAX_NUM_OF_VCE_CLK_STATES];
+ UINT8 NumOfVceClockEnties;
+ GfxPwrPlayTable204_STRUCT VceClockInfoArray[MAX_NUM_OF_VCE_CLK_STATES];
+ UINT8 NumOfVceStateEntries;
+ ATOM_PPLIB_VCE_STATE_RECORD VceStateArray[MAX_NUM_OF_VCE_STATES]; ///< VCE state array
+ UINT8 NumOfUvdClkVoltLimitEntries; ///
+ ATOM_PPLIB_UVD_CLK_VOLT_LIMIT_RECORD UvdClkVoltLimitArray[MAX_NUM_OF_UVD_CLK_STATES];
+ UINT8 NumOfUvdClockEntries;
+ GfxPwrPlayTable261_STRUCT UvdClockInfoArray[MAX_NUM_OF_UVD_CLK_STATES];
+ UINT8 PP_WORKSPACE_V2_fld15; ///
+ ATOM_PPLIB_SAMCLK_VOLT_LIMIT_RECORD PP_WORKSPACE_V2_fld16[MAX_NUM_OF_SAMCLK_STATES];
+ UINT8 PP_WORKSPACE_V2_fld17; ///
+ GfxPwrPlayTable310_STRUCT PP_WORKSPACE_V2_fld18[5];
+} PP_WORKSPACE_V2;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GfxIntDebugDumpPpTable (
+ IN ATOM_PPLIB_POWERPLAYTABLE4 *PpTable,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Create new software state
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ * @retval Pointer to state entry in SW state array
+ */
+
+STATIC SW_STATE *
+GfxPwrPlayCreateSwState (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ UINTN Index;
+ for (Index = 0; Index < MAX_NUM_OF_SW_STATES; Index++) {
+ if (PpWorkspace->SwStateArray[Index].Valid == FALSE) {
+ PpWorkspace->SwStateArray[Index].Valid = TRUE;
+ return &(PpWorkspace->SwStateArray[Index]);
+ }
+ }
+ return NULL;
+}
+
+/*----------------------------------------------------------------------------------------*/
+
+STATIC UINT8
+GfxPwrPlayTable192_fun (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace,
+ IN UINT32 fv1,
+ IN UINT8 Vid
+ )
+{
+ UINT8 Index;
+
+ for (Index = 0; Index < 10; Index++) {
+ if (PpWorkspace->PP_WORKSPACE_V2_fld4[Index].Valid == FALSE) {
+ PpWorkspace->PP_WORKSPACE_V2_fld4[Index].GfxPwrPlayTable120_STRUCT_fld1 = fv1;
+ PpWorkspace->PP_WORKSPACE_V2_fld4[Index].Vid = Vid;
+ PpWorkspace->PP_WORKSPACE_V2_fld4[Index].Valid = TRUE;
+ PpWorkspace->PP_WORKSPACE_V2_fld4[Index].Tdp = 0;
+ return Index;
+ }
+ }
+ return 0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+
+STATIC UINT8
+GfxPwrPlayTable224_fun (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace,
+ IN UINT32 fv1,
+ IN UINT8 Vid
+ )
+{
+ UINT8 Index;
+
+ for (Index = 0; Index < 10; Index++) {
+ if (PpWorkspace->PP_WORKSPACE_V2_fld4[Index].Valid &&
+ fv1 == PpWorkspace->PP_WORKSPACE_V2_fld4[Index].GfxPwrPlayTable120_STRUCT_fld1 &&
+ Vid == PpWorkspace->PP_WORKSPACE_V2_fld4[Index].Vid) {
+
+ return Index;
+ }
+ }
+
+ Index = GfxPwrPlayTable192_fun (PpWorkspace, fv1, Vid);
+
+ return Index;
+}
+
+
+STATIC VOID
+GfxPwrPlayTable256_fun (
+ IN OUT SW_STATE *SwStateArray,
+ IN UINT8 DpmStateIndex
+ )
+{
+ SwStateArray->SW_STATE_fld7[SwStateArray->SW_STATE_fld6++] = DpmStateIndex;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Copy SW state info to PPTable
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+STATIC VOID *
+GfxPwrPlayAttachStateInfoBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ UINT8 Index;
+ UINT8 SwStateIndex;
+ STATE_ARRAY *StateArray;
+ ATOM_PPLIB_STATE_V2 *States;
+ StateArray = (STATE_ARRAY *) ((UINT8 *) PpWorkspace->PpTable + PpWorkspace->PpTable->sHeader.usStructureSize);
+ States = &StateArray->States[0];
+ SwStateIndex = 0;
+ for (Index = 0; Index < MAX_NUM_OF_SW_STATES; Index++) {
+ if (PpWorkspace->SwStateArray[Index].Valid && PpWorkspace->SwStateArray[Index].SW_STATE_fld6 != 0) {
+ States->nonClockInfoIndex = SwStateIndex;
+ States->ATOM_PPLIB_STATE_V2_fld0 = PpWorkspace->SwStateArray[Index].SW_STATE_fld6;
+ LibAmdMemCopy (
+ &States->ClockInfoIndex[0],
+ PpWorkspace->SwStateArray[Index].SW_STATE_fld7,
+ PpWorkspace->SwStateArray[Index].SW_STATE_fld6,
+ GnbLibGetHeader (PpWorkspace->Gfx)
+ );
+ States = (ATOM_PPLIB_STATE_V2*) ((UINT8*) States + sizeof (ATOM_PPLIB_STATE_V2) + sizeof (UINT8) * (States->ATOM_PPLIB_STATE_V2_fld0 - 1));
+ SwStateIndex++;
+ }
+ }
+ StateArray->ucNumEntries = SwStateIndex;
+ PpWorkspace->PpTable->sHeader.usStructureSize = PpWorkspace->PpTable->sHeader.usStructureSize + (USHORT) ((UINT8 *) States - (UINT8 *) StateArray);
+ return StateArray;
+}
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Copy clock info to PPTable
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayAttachClockInfoBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ CLOCK_INFO_ARRAY *ClockInfoArray;
+ UINT8 Index;
+ UINT8 ClkStateIndex;
+ ClkStateIndex = 0;
+ ClockInfoArray = (CLOCK_INFO_ARRAY *) ((UINT8 *) PpWorkspace->PpTable + PpWorkspace->PpTable->sHeader.usStructureSize);
+ for (Index = 0; Index < 10; Index++) {
+ if (PpWorkspace->PP_WORKSPACE_V2_fld4[Index].Valid == TRUE) {
+ ClockInfoArray->ClockInfo[ClkStateIndex].ucEngineClockHigh = (UINT8) (PpWorkspace->PP_WORKSPACE_V2_fld4[Index].GfxPwrPlayTable120_STRUCT_fld1 >> 16);
+ ClockInfoArray->ClockInfo[ClkStateIndex].usEngineClockLow = (UINT16) (PpWorkspace->PP_WORKSPACE_V2_fld4[Index].GfxPwrPlayTable120_STRUCT_fld1);
+ ClockInfoArray->ClockInfo[ClkStateIndex].vddcIndex = PpWorkspace->PP_WORKSPACE_V2_fld4[Index].Vid;
+ ClockInfoArray->ClockInfo[ClkStateIndex].ATOM_PPLIB_SUMO_CLOCK_INFO_fld3 = PpWorkspace->PP_WORKSPACE_V2_fld4[Index].Tdp;
+ ClkStateIndex++;
+ }
+ }
+ ClockInfoArray->ucNumEntries = ClkStateIndex;
+ ClockInfoArray->ucEntrySize = sizeof (GfxPwrPlayTable143_STRUCT);
+ PpWorkspace->PpTable->sHeader.usStructureSize += sizeof (CLOCK_INFO_ARRAY) + sizeof (GfxPwrPlayTable143_STRUCT) * ClkStateIndex - sizeof (GfxPwrPlayTable143_STRUCT);
+ return ClockInfoArray;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Copy non clock info to PPTable
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayAttachNonClockInfoBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ NON_CLOCK_INFO_ARRAY *NonClockInfoArray;
+ UINT8 Index;
+ UINT8 NonClkStateIndex;
+
+ NonClockInfoArray = (NON_CLOCK_INFO_ARRAY *) ((UINT8 *) PpWorkspace->PpTable + PpWorkspace->PpTable->sHeader.usStructureSize);
+ NonClkStateIndex = 0;
+ for (Index = 0; Index < MAX_NUM_OF_SW_STATES; Index++) {
+ if (PpWorkspace->SwStateArray[Index].Valid && PpWorkspace->SwStateArray[Index].SW_STATE_fld6 != 0) {
+ NonClockInfoArray->NonClockInfo[NonClkStateIndex].usClassification = PpWorkspace->SwStateArray[Index].Classification;
+ NonClockInfoArray->NonClockInfo[NonClkStateIndex].ulCapsAndSettings = PpWorkspace->SwStateArray[Index].CapsAndSettings;
+ NonClockInfoArray->NonClockInfo[NonClkStateIndex].usClassification2 = PpWorkspace->SwStateArray[Index].Classification2;
+ NonClockInfoArray->NonClockInfo[NonClkStateIndex].ATOM_PPLIB_NONCLOCK_INFO_fld7 = PpWorkspace->SwStateArray[Index].SW_STATE_fld5;
+ NonClockInfoArray->NonClockInfo[NonClkStateIndex].ATOM_PPLIB_NONCLOCK_INFO_fld6 = PpWorkspace->SwStateArray[Index].SW_STATE_fld4;
+ NonClkStateIndex++;
+ }
+ }
+ NonClockInfoArray->ucNumEntries = NonClkStateIndex;
+ NonClockInfoArray->ucEntrySize = sizeof (ATOM_PPLIB_NONCLOCK_INFO);
+ PpWorkspace->PpTable->sHeader.usStructureSize += sizeof (NON_CLOCK_INFO_ARRAY) + sizeof (ATOM_PPLIB_NONCLOCK_INFO) * NonClkStateIndex - sizeof (ATOM_PPLIB_NONCLOCK_INFO);
+ return NonClockInfoArray;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if state valid
+ *
+ *
+ * @param[out] Index State index
+ * @param[in] PpF1s Pointer
+ * @param[in] Gfx Gfx configuration info
+ * @retval TRUE State is valid
+ */
+STATIC BOOLEAN
+GfxPwrPlayIsF1dStateValid (
+ IN UINT8 Index,
+ IN PP_F1_ARRAY_V2 *PpF1s,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ BOOLEAN Result;
+ Result = FALSE;
+ if ((PpF1s->PP_FUSE_ARRAY_V2_fld37 & (1 << Index)) || (PpF1s->PP_FUSE_ARRAY_V2_fld38 & (1 << Index))) {
+ Result = TRUE;
+ }
+ return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+
+STATIC VOID
+GfxPwrPlayTable437_fun (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ UINT8 ClkStateIndex;
+ UINT8 DpmF1Index;
+ UINT32 fv2;
+ SW_STATE *State;
+ PP_F1_ARRAY_V2 *PpF1s;
+
+ PpF1s = PpWorkspace->PpF1s;
+
+ // Create Battery state
+ State = GfxPwrPlayCreateSwState (PpWorkspace);
+
+ State->Classification = ATOM_PPLIB_CLASSIFICATION_UI_BATTERY;
+ State->Classification2 = 0;
+ State->SW_STATE_fld4 = 0;
+ State->SW_STATE_fld5 = 0;
+ if (PpWorkspace->Gfx->AbmSupport != 0) {
+ State->CapsAndSettings |= ATOM_PPLIB_ENABLE_VARIBRIGHT;
+ }
+ if (PpWorkspace->Gfx->DynamicRefreshRate != 0) {
+ State->CapsAndSettings |= ATOM_PPLIB_ENABLE_DRR;
+ }
+
+ for (DpmF1Index = 0; DpmF1Index < 5; DpmF1Index++) {
+
+ if (PpF1s->PP_FUSE_ARRAY_V2_fld38 & (1 << DpmF1Index)) {
+
+ fv2 = (PpF1s->PP_FUSE_ARRAY_V2_fld33[DpmF1Index] != 0) ?
+ GfxFmCalculateClock (PpF1s->PP_FUSE_ARRAY_V2_fld33[DpmF1Index],
+ GnbLibGetHeader (PpWorkspace->Gfx)) : 0;
+
+ if (fv2 != 0) {
+ ClkStateIndex = GfxPwrPlayTable224_fun (PpWorkspace, fv2, PpF1s->PP_FUSE_ARRAY_V2_fld32[DpmF1Index]);
+ GfxPwrPlayTable256_fun (State, ClkStateIndex);
+ }
+ }
+ }
+
+ // Create Performance state
+ State = GfxPwrPlayCreateSwState (PpWorkspace);
+
+ State->Classification = ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE;
+ State->Classification2 = 0;
+ State->SW_STATE_fld4 = 0;
+ State->SW_STATE_fld5 = 0;
+
+ // Loop through fused DPM states and find those that go with Performance
+ for (DpmF1Index = 0; DpmF1Index < 5; DpmF1Index++) {
+
+ if (PpF1s->PP_FUSE_ARRAY_V2_fld37 & (1 << DpmF1Index)) {
+
+ fv2 = (PpF1s->PP_FUSE_ARRAY_V2_fld33[DpmF1Index] != 0) ?
+ GfxFmCalculateClock (PpF1s->PP_FUSE_ARRAY_V2_fld33[DpmF1Index],
+ GnbLibGetHeader (PpWorkspace->Gfx)) : 0;
+
+ if (fv2 != 0) {
+ ClkStateIndex = GfxPwrPlayTable224_fun (PpWorkspace, fv2, PpF1s->PP_FUSE_ARRAY_V2_fld32[DpmF1Index]);
+ GfxPwrPlayTable256_fun (State, ClkStateIndex);
+ }
+ }
+ }
+
+ // Create Boot State
+ State = GfxPwrPlayCreateSwState (PpWorkspace);
+ State->Classification = ATOM_PPLIB_CLASSIFICATION_BOOT;
+ fv2 = 200 * 100;
+ ClkStateIndex = GfxPwrPlayTable224_fun (PpWorkspace, fv2, 0);
+ GfxPwrPlayTable256_fun (State, ClkStateIndex);
+
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+
+STATIC UINT8
+GfxPwrPlayAddEclkState (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace,
+ IN UINT32 Eclk
+ )
+{
+ UINT8 Index;
+ USHORT EclkLow;
+ UCHAR EclkHigh;
+ EclkLow = (USHORT) (Eclk & 0xffff);
+ EclkHigh = (UCHAR) (Eclk >> 16);
+ for (Index = 0; Index < PpWorkspace->NumOfVceClockEnties; Index++) {
+ if (PpWorkspace->VceClockInfoArray[Index].ucECClkHigh == EclkHigh && PpWorkspace->VceClockInfoArray[Index].usECClkLow == EclkLow) {
+ return Index;
+ }
+ }
+ PpWorkspace->VceClockInfoArray[PpWorkspace->NumOfVceClockEnties].ucECClkHigh = EclkHigh;
+ PpWorkspace->VceClockInfoArray[PpWorkspace->NumOfVceClockEnties].usECClkLow = EclkLow;
+ PpWorkspace->VceClockInfoArray[PpWorkspace->NumOfVceClockEnties].GfxPwrPlayTable204_STRUCT_fld1 = EclkHigh;
+ PpWorkspace->VceClockInfoArray[PpWorkspace->NumOfVceClockEnties].GfxPwrPlayTable204_STRUCT_fld0 = EclkLow;
+ return PpWorkspace->NumOfVceClockEnties++;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Add ECLK state
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ * @param[in] EclkIndex ECLK index
+ * @param[in] Vid Vid index
+ * @retval Index of state entry in Eclk Voltage record array
+ */
+
+STATIC UINT8
+GfxPwrPlayAddEclkVoltageRecord (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace,
+ IN UINT8 EclkIndex,
+ IN UINT8 Vid
+ )
+{
+ UINT8 Index;
+ for (Index = 0; Index < PpWorkspace->NumOfClockVoltageLimitEnties; Index++) {
+ if (PpWorkspace->VceClockVoltageLimitArray[Index].ucVCEClockInfoIndex == EclkIndex) {
+ return Index;
+ }
+ }
+ PpWorkspace->VceClockVoltageLimitArray[PpWorkspace->NumOfClockVoltageLimitEnties].ucVCEClockInfoIndex = EclkIndex;
+ PpWorkspace->VceClockVoltageLimitArray[PpWorkspace->NumOfClockVoltageLimitEnties].usVoltage = Vid;
+ return PpWorkspace->NumOfClockVoltageLimitEnties++;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+
+STATIC UINT8
+GfxPwrPlayTable588_fun (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace,
+ IN UINT32 fv1,
+ IN UINT32 fv2
+ )
+{
+ UINT8 Index;
+ USHORT v1;
+ UCHAR v2;
+ USHORT v3;
+ UCHAR v4;
+ v1 = (USHORT) (fv1 & 0xffff);
+ v2 = (UCHAR) (fv1 >> 16);
+ v3 = (USHORT) (fv2 & 0xffff);
+ v4 = (UCHAR) (fv2 >> 16);
+ for (Index = 0; Index < PpWorkspace->NumOfUvdClockEntries; Index++) {
+ if (PpWorkspace->UvdClockInfoArray[Index].GfxPwrPlayTable261_STRUCT_fld1 == v2 &&
+ PpWorkspace->UvdClockInfoArray[Index].GfxPwrPlayTable261_STRUCT_fld0 == v1) {
+ return Index;
+ }
+ }
+ PpWorkspace->UvdClockInfoArray[PpWorkspace->NumOfUvdClockEntries].GfxPwrPlayTable261_STRUCT_fld1 = v2;
+ PpWorkspace->UvdClockInfoArray[PpWorkspace->NumOfUvdClockEntries].GfxPwrPlayTable261_STRUCT_fld0 = v1;
+ PpWorkspace->UvdClockInfoArray[PpWorkspace->NumOfUvdClockEntries].GfxPwrPlayTable261_STRUCT_fld3 = v4;
+ PpWorkspace->UvdClockInfoArray[PpWorkspace->NumOfUvdClockEntries].GfxPwrPlayTable261_STRUCT_fld2 = v3;
+ return PpWorkspace->NumOfUvdClockEntries++;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Add Uvd voltage record
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ * @param[in] ClkIndex CLK index
+ * @param[in] Vid Vid index
+ * @retval Index of state entry in Eclk Voltage record array
+ */
+
+STATIC UINT8
+GfxPwrPlayAddUvdVoltageRecord (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace,
+ IN UINT8 ClkIndex,
+ IN UINT8 Vid
+ )
+{
+ UINT8 Index;
+ for (Index = 0; Index < PpWorkspace->NumOfUvdClkVoltLimitEntries; Index++) {
+ if (PpWorkspace->UvdClkVoltLimitArray[Index].ucUVDClockInfoIndex == ClkIndex) {
+ return Index;
+ }
+ }
+ PpWorkspace->UvdClkVoltLimitArray[PpWorkspace->NumOfUvdClkVoltLimitEntries].ucUVDClockInfoIndex =
+ ClkIndex;
+ PpWorkspace->UvdClkVoltLimitArray[PpWorkspace->NumOfUvdClkVoltLimitEntries].usVoltage = Vid;
+ return PpWorkspace->NumOfUvdClkVoltLimitEntries++;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Add Samu voltage record
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ * @param[in] Vid Vid
+ * @param[in] Samclk CLK associated with the Vid
+ * @retval Index of state entry in Voltage record array
+ */
+
+STATIC UINT8
+GfxPwrPlayAddSamuVoltageRecord (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace,
+ IN UINT8 Vid,
+ IN UINT32 Samclk
+ )
+{
+ UINT8 Index;
+ USHORT SamclkLow;
+ UCHAR SamclkHigh;
+ SamclkLow = (USHORT) (Samclk & 0xffff);
+ SamclkHigh = (UCHAR) (Samclk >> 16);
+ for (Index = 0; Index < PpWorkspace->PP_WORKSPACE_V2_fld15; Index++) {
+ if ((PpWorkspace->PP_WORKSPACE_V2_fld16[Index].usSAMClockHigh == SamclkHigh) &&
+ (PpWorkspace->PP_WORKSPACE_V2_fld16[Index].usSAMClockLow == SamclkLow) &&
+ (PpWorkspace->PP_WORKSPACE_V2_fld16[Index].usVoltage == Vid)
+ ) {
+ return Index;
+ }
+ }
+ PpWorkspace->PP_WORKSPACE_V2_fld16[PpWorkspace->PP_WORKSPACE_V2_fld15].usSAMClockHigh =
+ SamclkHigh;
+ PpWorkspace->PP_WORKSPACE_V2_fld16[PpWorkspace->PP_WORKSPACE_V2_fld15].usSAMClockLow =
+ SamclkLow;
+ PpWorkspace->PP_WORKSPACE_V2_fld16[PpWorkspace->PP_WORKSPACE_V2_fld15].usVoltage = Vid;
+ return PpWorkspace->PP_WORKSPACE_V2_fld15++;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attach extended header
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayAttachExtendedHeaderBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ ATOM_PPLIB_EXTENDEDHEADER *ExtendedHeader;
+ ExtendedHeader = (ATOM_PPLIB_EXTENDEDHEADER *)
+ ((UINT8 *) PpWorkspace->PpTable + PpWorkspace->PpTable->sHeader.usStructureSize);
+ ExtendedHeader->usSize = sizeof (ATOM_PPLIB_EXTENDEDHEADER);
+ PpWorkspace->PpTable->sHeader.usStructureSize += sizeof (ATOM_PPLIB_EXTENDEDHEADER);
+ return ExtendedHeader;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attach Vce Rev Block
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayAttachVceTableRevBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ ATOM_PPLIB_VCE_TABLE *VceTable;
+ VceTable = (ATOM_PPLIB_VCE_TABLE *) ((UINT8 *) PpWorkspace->PpTable + PpWorkspace->PpTable->sHeader.usStructureSize);
+ VceTable->revid = 0;
+ PpWorkspace->PpTable->sHeader.usStructureSize += sizeof (ATOM_PPLIB_VCE_TABLE);
+ return VceTable;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attach VCE clock info block
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayAttachVceClockInfoBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ VCECLOCKINFOARRAY *VceClockInfoArray;
+ VceClockInfoArray = (VCECLOCKINFOARRAY *) ((UINT8 *) PpWorkspace->PpTable + PpWorkspace->PpTable->sHeader.usStructureSize);
+ VceClockInfoArray->ucNumEntries = PpWorkspace->NumOfVceClockEnties;
+ LibAmdMemCopy (
+ &VceClockInfoArray->entries[0],
+ &PpWorkspace->VceClockInfoArray[0],
+ VceClockInfoArray->ucNumEntries * sizeof (GfxPwrPlayTable204_STRUCT),
+ GnbLibGetHeader (PpWorkspace->Gfx)
+ );
+ PpWorkspace->PpTable->sHeader.usStructureSize = PpWorkspace->PpTable->sHeader.usStructureSize +
+ sizeof (VCECLOCKINFOARRAY) +
+ VceClockInfoArray->ucNumEntries * sizeof (GfxPwrPlayTable204_STRUCT) -
+ sizeof (GfxPwrPlayTable204_STRUCT);
+ return VceClockInfoArray;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attach VCE voltage limit block
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayAttachVceVoltageLimitBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_TABLE *VceClockVoltageLimitTable;
+ VceClockVoltageLimitTable = (ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_TABLE *) ((UINT8 *) PpWorkspace->PpTable + PpWorkspace->PpTable->sHeader.usStructureSize);
+ VceClockVoltageLimitTable->numEntries = PpWorkspace->NumOfClockVoltageLimitEnties;
+ LibAmdMemCopy (
+ &VceClockVoltageLimitTable->entries[0],
+ &PpWorkspace->VceClockVoltageLimitArray[0],
+ VceClockVoltageLimitTable->numEntries * sizeof (ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_RECORD),
+ GnbLibGetHeader (PpWorkspace->Gfx)
+ );
+ PpWorkspace->PpTable->sHeader.usStructureSize =
+ PpWorkspace->PpTable->sHeader.usStructureSize +
+ sizeof (ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_TABLE) +
+ VceClockVoltageLimitTable->numEntries * sizeof (ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_RECORD) -
+ sizeof (ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_RECORD);
+ return VceClockVoltageLimitTable;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attach VCE state block
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayAttachVceStateTableBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ ATOM_PPLIB_VCE_STATE_TABLE *VceStateTable;
+ VceStateTable = (ATOM_PPLIB_VCE_STATE_TABLE *) ((UINT8 *) PpWorkspace->PpTable + PpWorkspace->PpTable->sHeader.usStructureSize);
+ VceStateTable->numEntries = PpWorkspace->NumOfVceStateEntries;
+ LibAmdMemCopy (
+ &VceStateTable->entries[0],
+ &PpWorkspace->VceStateArray[0],
+ VceStateTable->numEntries * sizeof (ATOM_PPLIB_VCE_STATE_RECORD),
+ GnbLibGetHeader (PpWorkspace->Gfx)
+ );
+ PpWorkspace->PpTable->sHeader.usStructureSize = PpWorkspace->PpTable->sHeader.usStructureSize +
+ sizeof (ATOM_PPLIB_VCE_STATE_TABLE) +
+ VceStateTable->numEntries * sizeof (ATOM_PPLIB_VCE_STATE_RECORD) -
+ sizeof (ATOM_PPLIB_VCE_STATE_RECORD);
+ return VceStateTable;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attach Uvd Rev Block
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayAttachUvdTableRevBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ ATOM_PPLIB_UVD_TABLE *UvdTable;
+ UvdTable = (ATOM_PPLIB_UVD_TABLE *) ((UINT8 *) PpWorkspace->PpTable + PpWorkspace->PpTable->sHeader.usStructureSize);
+ UvdTable->revid = 0;
+ PpWorkspace->PpTable->sHeader.usStructureSize += sizeof (ATOM_PPLIB_UVD_TABLE);
+ return UvdTable;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attach UVD clock info block
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayAttachUvdClockInfoBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ GfxPwrPlayTable267_STRUCT *UvdClockInfoArray;
+ UvdClockInfoArray = (GfxPwrPlayTable267_STRUCT *) ((UINT8 *) PpWorkspace->PpTable + PpWorkspace->PpTable->sHeader.usStructureSize);
+ UvdClockInfoArray->ucNumEntries = PpWorkspace->NumOfUvdClockEntries;
+ LibAmdMemCopy (
+ &UvdClockInfoArray->entries[0],
+ &PpWorkspace->UvdClockInfoArray[0],
+ UvdClockInfoArray->ucNumEntries * sizeof (GfxPwrPlayTable261_STRUCT),
+ GnbLibGetHeader (PpWorkspace->Gfx)
+ );
+ PpWorkspace->PpTable->sHeader.usStructureSize = PpWorkspace->PpTable->sHeader.usStructureSize +
+ sizeof (GfxPwrPlayTable267_STRUCT) +
+ UvdClockInfoArray->ucNumEntries * sizeof (GfxPwrPlayTable261_STRUCT) -
+ sizeof (GfxPwrPlayTable261_STRUCT);
+ return UvdClockInfoArray;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attach UVD voltage limit block
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayAttachUvdVoltageLimitBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ UVD_CLK_VOLT_LIMIT_TABLE *UvdClockVoltageLimitTable;
+ UvdClockVoltageLimitTable = (UVD_CLK_VOLT_LIMIT_TABLE *) ((UINT8 *) PpWorkspace->PpTable + PpWorkspace->PpTable->sHeader.usStructureSize);
+ UvdClockVoltageLimitTable->numEntries = PpWorkspace->NumOfUvdClkVoltLimitEntries;
+ LibAmdMemCopy (
+ &UvdClockVoltageLimitTable->entries[0],
+ &PpWorkspace->UvdClkVoltLimitArray[0],
+ UvdClockVoltageLimitTable->numEntries * sizeof (ATOM_PPLIB_UVD_CLK_VOLT_LIMIT_RECORD),
+ GnbLibGetHeader (PpWorkspace->Gfx)
+ );
+ PpWorkspace->PpTable->sHeader.usStructureSize =
+ PpWorkspace->PpTable->sHeader.usStructureSize +
+ sizeof (UVD_CLK_VOLT_LIMIT_TABLE) +
+ UvdClockVoltageLimitTable->numEntries * sizeof (ATOM_PPLIB_UVD_CLK_VOLT_LIMIT_RECORD) -
+ sizeof (ATOM_PPLIB_UVD_CLK_VOLT_LIMIT_RECORD);
+ return UvdClockVoltageLimitTable;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attach SAMU Rev Block
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayAttachSamuTableRevBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ ATOM_PPLIB_SAMU_TABLE *VceTable;
+ VceTable = (ATOM_PPLIB_SAMU_TABLE *) ((UINT8 *) PpWorkspace->PpTable +
+ PpWorkspace->PpTable->sHeader.usStructureSize);
+ VceTable->revid = 0;
+ PpWorkspace->PpTable->sHeader.usStructureSize += sizeof (ATOM_PPLIB_SAMU_TABLE);
+ return VceTable;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attach SAMU voltage limit block
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayAttachSamuVoltageLimitBlock (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ ATOM_PPLIB_SAMCLK_VOLT_LIMIT_TABLE *SamuClockVoltageLimitTable;
+ SamuClockVoltageLimitTable = (ATOM_PPLIB_SAMCLK_VOLT_LIMIT_TABLE *)
+ ((UINT8 *) PpWorkspace->PpTable + PpWorkspace->PpTable->sHeader.usStructureSize);
+ SamuClockVoltageLimitTable->numEntries = PpWorkspace->PP_WORKSPACE_V2_fld15;
+ LibAmdMemCopy (
+ &SamuClockVoltageLimitTable->entries[0],
+ &PpWorkspace->PP_WORKSPACE_V2_fld16[0],
+ SamuClockVoltageLimitTable->numEntries * sizeof (ATOM_PPLIB_SAMCLK_VOLT_LIMIT_RECORD),
+ GnbLibGetHeader (PpWorkspace->Gfx)
+ );
+ PpWorkspace->PpTable->sHeader.usStructureSize =
+ PpWorkspace->PpTable->sHeader.usStructureSize +
+ sizeof (ATOM_PPLIB_SAMCLK_VOLT_LIMIT_TABLE) +
+ SamuClockVoltageLimitTable->numEntries * sizeof (ATOM_PPLIB_SAMCLK_VOLT_LIMIT_RECORD) -
+ sizeof (ATOM_PPLIB_SAMCLK_VOLT_LIMIT_RECORD);
+ return SamuClockVoltageLimitTable;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attach Sclk Volt Dep Block
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID *
+GfxPwrPlayTable956_fun (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ GfxPwrPlayTable316_STRUCT *v0;
+
+ v0 = (GfxPwrPlayTable316_STRUCT *)
+ ((UINT8 *) PpWorkspace->PpTable +
+ PpWorkspace->PpTable->sHeader.usStructureSize);
+ v0->numEntries = PpWorkspace->PP_WORKSPACE_V2_fld17;
+ LibAmdMemCopy (
+ &v0->entries[0],
+ &PpWorkspace->PP_WORKSPACE_V2_fld18[0],
+ 5 * sizeof (GfxPwrPlayTable310_STRUCT),
+ GnbLibGetHeader (PpWorkspace->Gfx)
+ );
+ PpWorkspace->PpTable->sHeader.usStructureSize =
+ PpWorkspace->PpTable->sHeader.usStructureSize +
+ sizeof (GfxPwrPlayTable316_STRUCT) +
+ v0->numEntries * sizeof (GfxPwrPlayTable310_STRUCT) -
+ sizeof (GfxPwrPlayTable310_STRUCT);
+
+
+ return v0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Build VCE state info
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID
+GfxPwrPlayBuildVceStateTable (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ UINT8 Index;
+ UINT8 VceStateIndex;
+ UINT8 Vid;
+ UINT32 Eclk;
+ UINT32 v4;
+ UINT8 UsedStateBitmap;
+ UsedStateBitmap = 0;
+ // build used state
+ for (Index = 0;
+ Index < (sizeof (PpWorkspace->PpF1s->VceFlags) /
+ sizeof (PpWorkspace->PpF1s->VceFlags[0])) ;
+ Index++) {
+ UsedStateBitmap |= PpWorkspace->PpF1s->VceFlags[Index];
+ for (VceStateIndex = 0;
+ VceStateIndex < (sizeof (PpWorkspace->VceStateArray) /
+ sizeof (PpWorkspace->VceStateArray[0]));
+ VceStateIndex++) {
+ if ((PpWorkspace->PpF1s->VceFlags[Index] & (1 << VceStateIndex)) != 0) {
+ v4 = GfxFmCalculateClock (PpWorkspace->PpF1s->PP_FUSE_ARRAY_V2_fld33[PpWorkspace->PpF1s->PP_FUSE_ARRAY_V2_fld16[Index]],
+ GnbLibGetHeader (PpWorkspace->Gfx));
+ Vid = PpWorkspace->PpF1s->PP_FUSE_ARRAY_V2_fld32[PpWorkspace->PpF1s->PP_FUSE_ARRAY_V2_fld16[Index]];
+ PpWorkspace->VceStateArray[VceStateIndex].ucClockInfoIndex =
+ GfxPwrPlayTable224_fun (PpWorkspace, v4, Vid);
+ if (PpWorkspace->PpF1s->VceMclk) {
+ PpWorkspace->VceStateArray[VceStateIndex].ucClockInfoIndex |=
+ (PpWorkspace->PpF1s->VceMclk << 6);
+ }
+ Eclk = GfxFmCalculateClock (PpWorkspace->PpF1s->EclkDid[Index],
+ GnbLibGetHeader (PpWorkspace->Gfx));
+ PpWorkspace->VceStateArray[VceStateIndex].ucVCEClockInfoIndex =
+ GfxPwrPlayAddEclkState (PpWorkspace, Eclk);
+ GfxPwrPlayAddEclkVoltageRecord (PpWorkspace,
+ PpWorkspace->VceStateArray[VceStateIndex].ucVCEClockInfoIndex, Vid);
+ PpWorkspace->NumOfVceStateEntries++;
+ }
+ }
+ }
+ //build unused states
+ for (VceStateIndex = 0;
+ VceStateIndex < (sizeof (PpWorkspace->VceStateArray) / sizeof (PpWorkspace->VceStateArray[0]));
+ VceStateIndex++) {
+ if ((UsedStateBitmap & (1 << VceStateIndex)) == 0) {
+ PpWorkspace->VceStateArray[VceStateIndex].ucClockInfoIndex = 0;
+ PpWorkspace->VceStateArray[VceStateIndex].ucVCEClockInfoIndex = GfxPwrPlayAddEclkState (PpWorkspace, 0);
+ PpWorkspace->NumOfVceStateEntries++;
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+
+STATIC VOID
+GfxPwrPlayBuildUvdClockTable (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ UINT8 Index;
+ UINT8 Vid;
+ UINT32 v2;
+ UINT32 v3;
+ UINT8 UsedStateBitmap;
+ UINT8 UvdIndex;
+
+ UsedStateBitmap = 0;
+ // build used state
+ for (Index = 0; Index < MAX_NUM_OF_UVD_CLK_STATES ; Index++) {
+ if (GfxPwrPlayIsF1dStateValid (Index, PpWorkspace->PpF1s, PpWorkspace->Gfx)) {
+ Vid = PpWorkspace->PpF1s->PP_FUSE_ARRAY_V2_fld32[Index];
+ v2 = GfxFmCalculateClock (PpWorkspace->PpF1s->PP_FUSE_ARRAY_V2_fld1[Index],
+ GnbLibGetHeader (PpWorkspace->Gfx));
+ v3 = GfxFmCalculateClock (PpWorkspace->PpF1s->PP_FUSE_ARRAY_V2_fld2[Index],
+ GnbLibGetHeader (PpWorkspace->Gfx));
+ UvdIndex = GfxPwrPlayTable588_fun (PpWorkspace, v2, v3);
+ GfxPwrPlayAddUvdVoltageRecord (PpWorkspace,
+ UvdIndex, Vid);
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Build SAMU info
+ *
+ *
+ * @param[in, out] PpWorkspace PP workspace
+ */
+
+STATIC VOID
+GfxPwrPlayBuildSamuTable (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ UINT8 SamuIndex;
+ UINT8 Vid;
+ UINT32 Samuclk;
+ UINT8 UsedStateBitmap;
+ UsedStateBitmap = 0;
+ // build used state
+ for (SamuIndex = 0; SamuIndex < MAX_NUM_OF_SAMCLK_STATES; SamuIndex++) {
+ if (GfxPwrPlayIsF1dStateValid (SamuIndex, PpWorkspace->PpF1s, PpWorkspace->Gfx)) {
+ Vid = PpWorkspace->PpF1s->PP_FUSE_ARRAY_V2_fld32[SamuIndex];
+ Samuclk = GfxFmCalculateClock (PpWorkspace->PpF1s->PP_FUSE_ARRAY_V2_fld34[SamuIndex],
+ GnbLibGetHeader (PpWorkspace->Gfx));
+ GfxPwrPlayAddSamuVoltageRecord (PpWorkspace, Vid, Samuclk);
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+
+STATIC VOID
+GfxPwrPlayTable1122_fun (
+ IN OUT PP_WORKSPACE_V2 *PpWorkspace
+ )
+{
+ UINT8 v0;
+ UINT8 Vid;
+ UINT32 v2;
+ USHORT v3;
+ UCHAR v4;
+
+ // build the table
+ for (v0 = 0; v0 < 5; v0++) {
+ Vid = PpWorkspace->PpF1s->PP_FUSE_ARRAY_V2_fld32[v0];
+ v2 = GfxFmCalculateClock (PpWorkspace->PpF1s->PP_FUSE_ARRAY_V2_fld33[v0],
+ GnbLibGetHeader (PpWorkspace->Gfx));
+ ASSERT (Vid != 0)
+ ASSERT (v2 != 0)
+ v3 = (USHORT) (v2 & 0xffff);
+ v4 = (UCHAR) (v2 >> 16);
+ PpWorkspace->PP_WORKSPACE_V2_fld18[v0].GfxPwrPlayTable310_fld2 = Vid;
+ PpWorkspace->PP_WORKSPACE_V2_fld18[v0].GfxPwrPlayTable310_fld1 = v4;
+ PpWorkspace->PP_WORKSPACE_V2_fld18[v0].GfxPwrPlayTable310_fld0 = v3;
+ PpWorkspace->PP_WORKSPACE_V2_fld17++;
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Build PP table
+ *
+ *
+ * @param[out] Buffer Buffer to create PP table
+ * @param[in] Gfx Gfx configuration info
+ * @retval AGESA_SUCCESS
+ * @retval AGESA_ERROR
+ */
+
+AGESA_STATUS
+GfxPwrPlayBuildTable (
+ OUT VOID *Buffer,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ PP_WORKSPACE_V2 PpWorkspace;
+ VOID *BlockPtr;
+
+ LibAmdMemFill (&PpWorkspace, 0x00, sizeof (PP_WORKSPACE_V2), GnbLibGetHeader (Gfx));
+ PpWorkspace.PpF1s = GnbLocateHeapBuffer (AMD_PP_F1_TABLE_HANDLE, GnbLibGetHeader (Gfx));
+ ASSERT (PpWorkspace.PpF1s != NULL);
+ if (PpWorkspace.PpF1s == NULL) {
+ return AGESA_ERROR;
+ }
+
+ PpWorkspace.PpTable = (ATOM_PPLIB_POWERPLAYTABLE4 *) Buffer;
+ PpWorkspace.Gfx = Gfx;
+ //Fill static info
+ PpWorkspace.PpTable->sHeader.ucTableFormatRevision = 6;
+ PpWorkspace.PpTable->sHeader.ucTableContentRevision = 1;
+ PpWorkspace.PpTable->ucDataRevision = PpWorkspace.PpF1s->PPlayTableRev;
+ PpWorkspace.PpTable->sThermalController.ucType = ATOM_PP_THERMALCONTROLLER_KV;
+ PpWorkspace.PpTable->sThermalController.ucFanParameters = ATOM_PP_FANPARAMETERS_NOFAN;
+ PpWorkspace.PpTable->sHeader.usStructureSize = sizeof (ATOM_PPLIB_POWERPLAYTABLE4);
+ PpWorkspace.PpTable->usTableSize = sizeof (ATOM_PPLIB_POWERPLAYTABLE4);
+ PpWorkspace.PpTable->usFormatID = 0x13;
+ if ((Gfx->AmdPlatformType & AMD_PLATFORM_MOBILE) != 0) {
+ PpWorkspace.PpTable->ulPlatformCaps |= ATOM_PP_PLATFORM_CAP_POWERPLAY;
+ }
+
+
+ GfxPwrPlayTable437_fun (&PpWorkspace);
+
+ // Fill Eclk state info
+ if (PpWorkspace.PpF1s->PP_FUSE_ARRAY_V2_fld13) {
+ GfxPwrPlayBuildVceStateTable (&PpWorkspace);
+ GfxPwrPlayBuildUvdClockTable (&PpWorkspace);
+ GfxPwrPlayBuildSamuTable (&PpWorkspace);
+ GfxPwrPlayTable1122_fun (&PpWorkspace);
+ }
+
+ //Copy state info to actual PP table
+ BlockPtr = GfxPwrPlayAttachStateInfoBlock (&PpWorkspace);
+ PpWorkspace.PpTable->usStateArrayOffset = (USHORT) ((UINT8 *) BlockPtr - (UINT8 *) (PpWorkspace.PpTable));
+ BlockPtr = GfxPwrPlayAttachClockInfoBlock (&PpWorkspace);
+ PpWorkspace.PpTable->usClockInfoArrayOffset = (USHORT) ((UINT8 *) BlockPtr - (UINT8 *) (PpWorkspace.PpTable));
+ BlockPtr = GfxPwrPlayAttachNonClockInfoBlock (&PpWorkspace);
+ PpWorkspace.PpTable->usNonClockInfoArrayOffset = (USHORT) ((UINT8 *) BlockPtr - (UINT8 *) (PpWorkspace.PpTable));
+
+ if (PpWorkspace.PpF1s->PP_FUSE_ARRAY_V2_fld13) {
+ ATOM_PPLIB_EXTENDEDHEADER *ExtendedHeader;
+ ExtendedHeader =
+ (ATOM_PPLIB_EXTENDEDHEADER *) GfxPwrPlayAttachExtendedHeaderBlock (&PpWorkspace);
+ PpWorkspace.PpTable->usExtendendedHeaderOffset =
+ (USHORT) ((UINT8 *) ExtendedHeader - (UINT8 *) (PpWorkspace.PpTable));
+ BlockPtr = GfxPwrPlayAttachVceTableRevBlock (&PpWorkspace);
+ ExtendedHeader->usVCETableOffset =
+ (USHORT) ((UINT8 *) BlockPtr - (UINT8 *) (PpWorkspace.PpTable));
+ GfxPwrPlayAttachVceClockInfoBlock (&PpWorkspace);
+ GfxPwrPlayAttachVceVoltageLimitBlock (&PpWorkspace);
+ GfxPwrPlayAttachVceStateTableBlock (&PpWorkspace);
+
+ BlockPtr = GfxPwrPlayAttachUvdTableRevBlock (&PpWorkspace);
+ ExtendedHeader->usUVDTableOffset =
+ (USHORT) ((UINT8 *) BlockPtr - (UINT8 *) (PpWorkspace.PpTable));
+ GfxPwrPlayAttachUvdClockInfoBlock (&PpWorkspace);
+ GfxPwrPlayAttachUvdVoltageLimitBlock (&PpWorkspace);
+
+ BlockPtr = GfxPwrPlayAttachSamuTableRevBlock (&PpWorkspace);
+ ExtendedHeader->usSAMUTableOffset =
+ (USHORT) ((UINT8 *) BlockPtr - (UINT8 *) (PpWorkspace.PpTable));
+ GfxPwrPlayAttachSamuVoltageLimitBlock (&PpWorkspace);
+
+ BlockPtr = GfxPwrPlayTable956_fun (&PpWorkspace);
+ PpWorkspace.PpTable->ATOM_PPLIB_POWERPLAYTABLE4_fld17 =
+ (USHORT) ((UINT8 *) BlockPtr - (UINT8 *) (PpWorkspace.PpTable));
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "ExtendedHeader \n");
+ IDS_HDT_CONSOLE (GNB_TRACE, " VceTableOffset = %04x\n", ExtendedHeader->usVCETableOffset);
+ IDS_HDT_CONSOLE (GNB_TRACE, " UvdTableOffset = %04x\n", ExtendedHeader->usUVDTableOffset);
+ IDS_HDT_CONSOLE (GNB_TRACE, " SamTableOffset = %04x\n", ExtendedHeader->usSAMUTableOffset);
+ IDS_HDT_CONSOLE (GNB_TRACE, "\n");
+
+ }
+ GNB_DEBUG_CODE (
+ GfxIntDebugDumpPpTable (PpWorkspace.PpTable, Gfx);
+ );
+
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Dump PP table
+ *
+ *
+ *
+ * @param[in] PpTable Power Play table
+ * @param[in] Gfx Gfx configuration info
+ */
+
+VOID
+GfxIntDebugDumpPpTable (
+ IN ATOM_PPLIB_POWERPLAYTABLE4 *PpTable,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINTN Index;
+ STATE_ARRAY *StateArray;
+ ATOM_PPLIB_STATE_V2 *StatesPtr;
+ NON_CLOCK_INFO_ARRAY *NonClockInfoArrayPtr;
+ CLOCK_INFO_ARRAY *ClockInfoArrayPtr;
+ ATOM_PPLIB_EXTENDEDHEADER *ExtendedHeader;
+ ATOM_PPLIB_VCE_STATE_TABLE *VceStateTable;
+ ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_TABLE *VceClockVoltageLimitTable;
+ VCECLOCKINFOARRAY *VceClockInfoArray;
+ GfxPwrPlayTable267_STRUCT *UvdClockInfoArray;
+ UVD_CLK_VOLT_LIMIT_TABLE *UvdClockVoltLimitTable;
+ ATOM_PPLIB_SAMCLK_VOLT_LIMIT_TABLE *SamuClockVoltLimitTable;
+ UINT8 EclkIndex;
+
+ IDS_HDT_CONSOLE (GFX_MISC, " < --- Power Play Table ------ > \n");
+ IDS_HDT_CONSOLE (GFX_MISC, " Table Revision = %d\n", PpTable->ucDataRevision);
+ StateArray = (STATE_ARRAY *) ((UINT8 *) PpTable + PpTable->usStateArrayOffset);
+ StatesPtr = StateArray->States;
+ NonClockInfoArrayPtr = (NON_CLOCK_INFO_ARRAY *) ((UINT8 *) PpTable + PpTable->usNonClockInfoArrayOffset);
+ ClockInfoArrayPtr = (CLOCK_INFO_ARRAY *) ((UINT8 *) PpTable + PpTable->usClockInfoArrayOffset);
+ IDS_HDT_CONSOLE (GFX_MISC, " < --- SW State Table ---------> \n");
+ for (Index = 0; Index < StateArray->ucNumEntries; Index++) {
+ IDS_HDT_CONSOLE (GFX_MISC, " State #%d\n", Index + 1
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " Classification 0x%x\n",
+ NonClockInfoArrayPtr->NonClockInfo[StatesPtr->nonClockInfoIndex].usClassification
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " Classification2 0x%x\n",
+ NonClockInfoArrayPtr->NonClockInfo[StatesPtr->nonClockInfoIndex].usClassification2
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, "\n");
+ StatesPtr = (ATOM_PPLIB_STATE_V2 *) ((UINT8 *) StatesPtr + sizeof (ATOM_PPLIB_STATE_V2) + StatesPtr->ATOM_PPLIB_STATE_V2_fld0 - 1);
+ }
+ if (PpTable->usExtendendedHeaderOffset != 0) {
+ ExtendedHeader = (ATOM_PPLIB_EXTENDEDHEADER *) ((UINT8 *) PpTable +
+ PpTable->usExtendendedHeaderOffset);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "ExtendedHeader = %08x\n", ExtendedHeader);
+
+ VceClockInfoArray = (VCECLOCKINFOARRAY *) ((UINT8 *) PpTable +
+ ExtendedHeader->usVCETableOffset + sizeof (ATOM_PPLIB_VCE_TABLE));
+ VceClockVoltageLimitTable =
+ (ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_TABLE *) ((UINT8 *) VceClockInfoArray +
+ sizeof (VCECLOCKINFOARRAY) +
+ VceClockInfoArray->ucNumEntries * sizeof (GfxPwrPlayTable204_STRUCT) -
+ sizeof (GfxPwrPlayTable204_STRUCT));
+ VceStateTable =
+ (ATOM_PPLIB_VCE_STATE_TABLE *) ((UINT8 *) VceClockVoltageLimitTable +
+ sizeof (ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_TABLE) +
+ VceClockVoltageLimitTable->numEntries * sizeof (ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_RECORD) -
+ sizeof (ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_RECORD));
+ UvdClockInfoArray =
+ (GfxPwrPlayTable267_STRUCT *) ((UINT8 *) PpTable + ExtendedHeader->usUVDTableOffset +
+ sizeof (ATOM_PPLIB_UVD_TABLE));
+ UvdClockVoltLimitTable =
+ (UVD_CLK_VOLT_LIMIT_TABLE *) ((UINT8 *) UvdClockInfoArray + sizeof (GfxPwrPlayTable267_STRUCT) +
+ UvdClockInfoArray->ucNumEntries * sizeof (GfxPwrPlayTable261_STRUCT) -
+ sizeof (GfxPwrPlayTable261_STRUCT));
+ SamuClockVoltLimitTable =
+ (ATOM_PPLIB_SAMCLK_VOLT_LIMIT_TABLE *)
+ ((UINT8 *) PpTable + ExtendedHeader->usSAMUTableOffset + sizeof (ATOM_PPLIB_SAMU_TABLE));
+
+ IDS_HDT_CONSOLE (GFX_MISC, " < --- VCE State Table [%d]--> \n", VceStateTable->numEntries);
+
+ IDS_HDT_CONSOLE (GFX_MISC, " < --- VCE Voltage Record Table ---> \n");
+ for (Index = 0; Index < VceClockVoltageLimitTable->numEntries; Index++) {
+ EclkIndex = VceClockVoltageLimitTable->entries[Index].ucVCEClockInfoIndex;
+ IDS_HDT_CONSOLE (GFX_MISC, " VCE Voltage Record #%d\n", Index
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " ECLK = %d\n",
+ VceClockInfoArray->entries[EclkIndex].usECClkLow | (VceClockInfoArray->entries[EclkIndex].ucECClkHigh << 16)
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " VID index = %d\n",
+ VceClockVoltageLimitTable->entries[Index].usVoltage
+ );
+ }
+
+
+ IDS_HDT_CONSOLE (GFX_MISC, " < --- SAMU Voltage Record Table ---> \n");
+ for (Index = 0; Index < SamuClockVoltLimitTable->numEntries; Index++) {
+ IDS_HDT_CONSOLE (GFX_MISC, " SAMU Voltage Record #%d\n", Index
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " SAMCLK = %d\n",
+ SamuClockVoltLimitTable->entries[Index].usSAMClockLow |
+ (SamuClockVoltLimitTable->entries[Index].usSAMClockHigh << 16)
+ );
+ IDS_HDT_CONSOLE (GFX_MISC, " VID index = %d\n",
+ SamuClockVoltLimitTable->entries[Index].usVoltage
+ );
+ }
+ }
+
+ IDS_HDT_CONSOLE (GFX_MISC, " PplayDumpExit\n");
+
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxPwrPlayTable.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxPwrPlayTable.h
new file mode 100644
index 0000000..05895ce
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbGfxIntTableV3/GfxPwrPlayTable.h
@@ -0,0 +1,321 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to initialize Power Play Table
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 63366 $ @e \$Date: 2011-12-21 14:49:48 -0600 (Wed, 21 Dec 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GFXPWRPLAYTABLE_H_
+#define _GFXPWRPLAYTABLE_H_
+
+#pragma pack (push, 1)
+
+#define POLICY_LABEL_BATTERY 0x1
+#define POLICY_LABEL_PERFORMANCE 0x2
+
+#define MAX_NUM_OF_SW_STATES 3
+#define MAX_NUM_OF_VCE_CLK_STATES 5
+#define MAX_NUM_OF_VCE_STATES 6
+#define MAX_NUM_OF_UVD_CLK_STATES 5
+#define MAX_NUM_OF_SAMCLK_STATES 5
+/// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps
+#define ATOM_PP_PLATFORM_CAP_BACKBIAS 1
+#define ATOM_PP_PLATFORM_CAP_POWERPLAY 2
+#define ATOM_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 4
+#define ATOM_PP_PLATFORM_CAP_ASPM_L0s 8
+#define ATOM_PP_PLATFORM_CAP_ASPM_L1 16
+#define ATOM_PP_PLATFORM_CAP_HARDWAREDC 32
+#define ATOM_PP_PLATFORM_CAP_GEMINIPRIMARY 64
+#define ATOM_PP_PLATFORM_CAP_STEPVDDC 128
+#define ATOM_PP_PLATFORM_CAP_VOLTAGECONTROL 256
+#define ATOM_PP_PLATFORM_CAP_SIDEPORTCONTROL 512
+#define ATOM_PP_PLATFORM_CAP_TURNOFFPLL_ASPML1 1024
+#define ATOM_PP_PLATFORM_CAP_HTLINKCONTROL 2048
+#define ATOM_PP_PLATFORM_CAP_MVDDCONTROL 4096
+#define ATOM_PP_PLATFORM_CAP_GOTO_BOOT_ON_ALERT 0x2000 // Go to boot state on alerts, e.g. on an AC->DC transition.
+#define ATOM_PP_PLATFORM_CAP_DONT_WAIT_FOR_VBLANK_ON_ALERT 0x4000 // Do NOT wait for VBLANK during an alert (e.g. AC->DC transition).
+#define ATOM_PP_PLATFORM_CAP_VDDCI_CONTROL 0x8000 // Does
+#define ATOM_PP_PLATFORM_CAP_REGULATOR_HOT 0x00010000ul // Enable the 'regulator hot' feature.
+#define ATOM_PP_PLATFORM_CAP_BACO 0x00020000ul // Does the driver supports BACO state.
+
+
+#define ATOM_PPLIB_CLASSIFICATION_UI_BATTERY 1
+#define ATOM_PPLIB_CLASSIFICATION_UI_BALANCED 3
+#define ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE 5
+
+#define ATOM_PPLIB_CLASSIFICATION_BOOT 0x0008
+#define ATOM_PPLIB_CLASSIFICATION_THERMAL 0x0010
+#define ATOM_PPLIB_CLASSIFICATION_LIMITEDPOWERSOURCE 0x0020
+#define ATOM_PPLIB_CLASSIFICATION_REST 0x0040
+#define ATOM_PPLIB_CLASSIFICATION_FORCED 0x0080
+#define ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE 0x0100
+#define ATOM_PPLIB_CLASSIFICATION_OVERDRIVETEMPLATE 0x0200
+#define ATOM_PPLIB_CLASSIFICATION_UVDSTATE 0x0400
+#define ATOM_PPLIB_CLASSIFICATION_3DLOW 0x0800
+#define ATOM_PPLIB_CLASSIFICATION_ACPI 0x1000
+#define ATOM_PPLIB_CLASSIFICATION_HD2STATE 0x2000
+#define ATOM_PPLIB_CLASSIFICATION_HDSTATE 0x4000
+#define ATOM_PPLIB_CLASSIFICATION_SDSTATE 0x8000
+#define ATOM_PPLIB_CLASSIFICATION_NONUVDSTATE 0x0000
+
+#define ATOM_PPLIB_CLASSIFICATION2_MVC 0x0004 //Multi-View
+
+#define ATOM_PPLIB_ENABLE_VARIBRIGHT 0x00008000ul
+#define ATOM_PPLIB_ENABLE_DRR 0x00080000ul
+
+#define ATOM_PP_FANPARAMETERS_NOFAN 0x80
+#define ATOM_PP_THERMALCONTROLLER_KV 0x13
+
+typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO {
+ USHORT usEngineClockLow;
+ UCHAR ucEngineClockHigh;
+ UCHAR vddcIndex;
+ USHORT ATOM_PPLIB_SUMO_CLOCK_INFO_fld3;
+ USHORT rsv1;
+ ULONG rsv2[2];
+} GfxPwrPlayTable143_STRUCT;
+
+/// Non clock info
+typedef struct _ATOM_PPLIB_NONCLOCK_INFO {
+ USHORT usClassification; ///< State classification see ATOM_PPLIB_CLASSIFICATION_*
+ UCHAR ucMinTemperature; ///< Reserved
+ UCHAR ucMaxTemperature; ///< Reserved
+ ULONG ulCapsAndSettings; ///< Capability Setting (ATOM_PPLIB_ENABLE_DRR or ATOM_PPLIB_ENABLE_VARIBRIGHT or 0)
+ UCHAR ucRequiredPower; ///< Reserved
+ USHORT usClassification2; ///< Reserved
+ ULONG ATOM_PPLIB_NONCLOCK_INFO_fld6;
+ ULONG ATOM_PPLIB_NONCLOCK_INFO_fld7;
+ UCHAR ucUnused[5]; ///< Reserved
+} ATOM_PPLIB_NONCLOCK_INFO;
+
+/// Thermal controller info stub
+typedef struct _ATOM_PPLIB_THERMALCONTROLLER {
+ UCHAR ucType; ///< Reserved. Should be set 0xE
+ UCHAR ucI2cLine; ///< Reserved. Should be set 0
+ UCHAR ucI2cAddress; ///< Reserved. Should be set 0
+ UCHAR ucFanParameters; ///< Reserved. Should be set 0x80
+ UCHAR ucFanMinRPM; ///< Reserved. Should be set 0
+ UCHAR ucFanMaxRPM; ///< Reserved. Should be set 0
+ UCHAR ucReserved; ///< Reserved. Should be set 0
+ UCHAR ucFlags; ///< Reserved. Should be set 0
+} ATOM_PPLIB_THERMALCONTROLLER;
+
+/// SW state info
+typedef struct _ATOM_PPLIB_STATE_V2 {
+ UCHAR ATOM_PPLIB_STATE_V2_fld0;
+ UCHAR nonClockInfoIndex; ///< Index to the array of NonClockInfos
+ UCHAR ClockInfoIndex[1]; ///< Array of DPM states. Actual number calculated during state enumeration
+} ATOM_PPLIB_STATE_V2;
+
+/// SW state Array
+typedef struct {
+ UCHAR ucNumEntries; ///< Number of SW states
+ ATOM_PPLIB_STATE_V2 States[1]; ///< SW state info. Actual number calculated during state enumeration
+} STATE_ARRAY;
+
+/// Clock info Array
+typedef struct {
+ UCHAR ucNumEntries; ///< Number of ClockInfo entries
+ UCHAR ucEntrySize;
+ GfxPwrPlayTable143_STRUCT ClockInfo[1];
+} CLOCK_INFO_ARRAY;
+
+/// Non clock info Array
+typedef struct {
+
+ UCHAR ucNumEntries; ///< Number of Entries;
+ UCHAR ucEntrySize; ///< Size of NonClockInfo
+ ATOM_PPLIB_NONCLOCK_INFO NonClockInfo[1]; ///< Non clock info array
+} NON_CLOCK_INFO_ARRAY;
+
+/// VCE clock info
+typedef struct {
+ USHORT GfxPwrPlayTable204_STRUCT_fld0;
+ UCHAR GfxPwrPlayTable204_STRUCT_fld1;
+ USHORT usECClkLow;
+ UCHAR ucECClkHigh;
+} GfxPwrPlayTable204_STRUCT;
+
+/// VCE clock info array
+typedef struct {
+ UCHAR ucNumEntries;
+ GfxPwrPlayTable204_STRUCT entries[1];
+} VCECLOCKINFOARRAY;
+
+/// VCE voltage limit record
+typedef struct {
+ USHORT usVoltage; ///< Voltage index
+ UCHAR ucVCEClockInfoIndex; ///< Index of VCE clock state
+} ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_RECORD;
+
+/// VCE voltage limit table
+typedef struct {
+ UCHAR numEntries; ///< Number of entries
+ ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_RECORD entries[1]; ///< Voltage limit state array
+} ATOM_PPLIB_VCE_CLOCK_VOLTAGE_LIMIT_TABLE;
+
+/// VCE state record
+typedef struct {
+ UCHAR ucVCEClockInfoIndex; ///< Index of VCE clock state
+ UCHAR ucClockInfoIndex;
+} ATOM_PPLIB_VCE_STATE_RECORD;
+
+/// VCE state table
+typedef struct {
+ UCHAR numEntries; ///< Number of state entries
+ ATOM_PPLIB_VCE_STATE_RECORD entries[1]; ///< State entries
+} ATOM_PPLIB_VCE_STATE_TABLE;
+
+/// Extended header
+typedef struct {
+ USHORT usSize; ///< size of header
+ ULONG rsv15; ///< reserved
+ ULONG rsv16; ///< reserved
+ USHORT usVCETableOffset; ///< offset of ATOM_PPLIB_VCE_TABLE
+ USHORT usUVDTableOffset; ///< offset of ATOM_PPLIB_UVD_TABLE
+ USHORT usSAMUTableOffset; ///< offset of ATOM_PPLIB_SAMU_TABLE
+ USHORT usPPMTableOffset; ///< offset of ATOM_PPLIB_PPM_TABLE
+ USHORT usACPTableOffset; ///< offset of ATOM_PPLIB_ACP_TABLE
+ USHORT usCACTDPTableOffset; ///< offset of ATOM_PPLIB_CACTDP_TABLE
+} ATOM_PPLIB_EXTENDEDHEADER;
+
+/// VCE table
+typedef struct {
+ UCHAR revid; ///< revision ID
+} ATOM_PPLIB_VCE_TABLE;
+
+
+typedef struct {
+ USHORT GfxPwrPlayTable261_STRUCT_fld0;
+ UCHAR GfxPwrPlayTable261_STRUCT_fld1;
+ USHORT GfxPwrPlayTable261_STRUCT_fld2;
+ UCHAR GfxPwrPlayTable261_STRUCT_fld3;
+} GfxPwrPlayTable261_STRUCT;
+
+/// UVD clock info array
+typedef struct {
+ UCHAR ucNumEntries;
+ GfxPwrPlayTable261_STRUCT entries[1];
+} GfxPwrPlayTable267_STRUCT;
+
+/// VCE voltage limit record
+typedef struct {
+ USHORT usVoltage; ///< Voltage index
+ UCHAR ucUVDClockInfoIndex; ///< Index of VCE clock state
+} ATOM_PPLIB_UVD_CLK_VOLT_LIMIT_RECORD;
+
+/// VCE voltage limit table
+typedef struct {
+ UCHAR numEntries; ///< Number of entries
+ ATOM_PPLIB_UVD_CLK_VOLT_LIMIT_RECORD entries[1]; ///< Voltage limit state array
+} UVD_CLK_VOLT_LIMIT_TABLE;
+
+/// UVD table
+typedef struct {
+ UCHAR revid; ///< revision ID
+} ATOM_PPLIB_UVD_TABLE;
+
+/// SAMU voltage limit record
+typedef struct {
+ USHORT usVoltage; ///< voltage
+ USHORT usSAMClockLow; ///< SamClk low
+ UCHAR usSAMClockHigh; ///< SamClk high
+} ATOM_PPLIB_SAMCLK_VOLT_LIMIT_RECORD;
+
+/// SAMU voltage limit table
+typedef struct {
+ UCHAR numEntries; ///< number of entries
+ ATOM_PPLIB_SAMCLK_VOLT_LIMIT_RECORD entries[1]; ///< array of entries
+} ATOM_PPLIB_SAMCLK_VOLT_LIMIT_TABLE;
+
+/// SAMU table
+typedef struct {
+ UCHAR revid; ///< table revision id
+// ATOM_PPLIB_SAMCLK_VOLT_LIMIT_TABLE limits; ///< offset of table
+} ATOM_PPLIB_SAMU_TABLE;
+
+typedef struct {
+ USHORT GfxPwrPlayTable310_fld0;
+ UCHAR GfxPwrPlayTable310_fld1;
+ USHORT GfxPwrPlayTable310_fld2;
+} GfxPwrPlayTable310_STRUCT;
+
+typedef struct {
+ UCHAR numEntries;
+ GfxPwrPlayTable310_STRUCT entries[1];
+} GfxPwrPlayTable316_STRUCT;
+
+#define ATOM_PPM_A_A 1
+#define ATOM_PPM_A_I 2
+
+/// Power Play table
+typedef struct _ATOM_PPLIB_POWERPLAYTABLE4 {
+ ATOM_COMMON_TABLE_HEADER sHeader; ///< Common header
+ UCHAR ucDataRevision; ///< Revision of PP table
+ UCHAR Reserved1[4]; ///< Reserved
+ USHORT usStateArrayOffset; ///< Offset from start of this table to array of ucNumStates ATOM_PPLIB_STATE structures
+ USHORT usClockInfoArrayOffset; ///< Offset from start of the table to ClockInfoArray
+ USHORT usNonClockInfoArrayOffset; ///< Offset from Start of the table to NonClockInfoArray
+ USHORT Reserved2[2]; ///< Reserved
+ USHORT usTableSize; ///< the size of this structure, or the extended structure
+ ULONG ulPlatformCaps; ///< See ATOM_PPLIB_CAPS_*
+ ATOM_PPLIB_THERMALCONTROLLER sThermalController; ///< Thermal controller stub.
+ USHORT Reserved4[2]; ///< Reserved
+ UCHAR Reserved5; ///< Reserved
+ USHORT Reserved6; ///< Reserved
+ USHORT usFormatID; ///< Format ID
+ USHORT Reserved7[1]; ///< Reserved
+ USHORT usExtendendedHeaderOffset; ///< Extended header offset
+ ULONG Reserved8[2]; ///< Reserved
+ USHORT ATOM_PPLIB_POWERPLAYTABLE4_fld17;
+ USHORT Reserved9[5]; ///< Reserved
+} ATOM_PPLIB_POWERPLAYTABLE4;
+
+#pragma pack (pop)
+
+
+AGESA_STATUS
+GfxPwrPlayBuildTable (
+ OUT VOID *Buffer,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/AlibKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/AlibKB.c
new file mode 100644
index 0000000..30ec1b3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/AlibKB.c
@@ -0,0 +1,92 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe ALIB
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "AlibSsdtKB.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_ALIBKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID *
+PcieAlibGetBaseTableKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get base SSDT table
+ *
+ *
+ *
+ * @param[in] StdHeader Standard Configuration Header
+ * @retval pointer to SSTD table
+ */
+VOID *
+PcieAlibGetBaseTableKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return &AlibSsdtKB[0];
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/AlibSsdtKB.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/AlibSsdtKB.h
new file mode 100644
index 0000000..eb3c21f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/AlibSsdtKB.h
@@ -0,0 +1,3230 @@
+/**
+ * @file
+ *
+ * ALIB SSDT table
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 87932 $ @e \$Date: 2013-02-13 13:53:55 -0600 (Wed, 13 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _ALIBSSDTKB_H_
+#define _ALIBSSDTKB_H_
+
+UINT8 AlibSsdtKB[] = {
+ 0x53, 0x53, 0x44, 0x54, 0x52, 0x63, 0x00, 0x00,
+ 0x02, 0x82, 0x41, 0x4D, 0x44, 0x00, 0x00, 0x00,
+ 0x41, 0x4C, 0x49, 0x42, 0x00, 0x00, 0x00, 0x00,
+ 0x02, 0x00, 0x00, 0x00, 0x4D, 0x53, 0x46, 0x54,
+ 0x00, 0x00, 0x00, 0x04, 0x10, 0x8D, 0x32, 0x06,
+ 0x5C, 0x5F, 0x53, 0x42, 0x5F, 0x08, 0x41, 0x47,
+ 0x52, 0x42, 0x0C, 0xFF, 0xFF, 0xFF, 0xFF, 0x08,
+ 0x41, 0x44, 0x42, 0x47, 0x11, 0x04, 0x0B, 0x00,
+ 0x01, 0x08, 0x41, 0x44, 0x41, 0x54, 0x11, 0x45,
+ 0x20, 0x0B, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x14, 0x41, 0x17, 0x41,
+ 0x4C, 0x49, 0x42, 0x02, 0xA0, 0x40, 0x09, 0x93,
+ 0x68, 0x0A, 0x00, 0x70, 0x11, 0x04, 0x0B, 0x00,
+ 0x01, 0x60, 0x8B, 0x60, 0x0A, 0x00, 0x41, 0x30,
+ 0x32, 0x35, 0x70, 0x0A, 0x08, 0x41, 0x30, 0x32,
+ 0x35, 0x8B, 0x60, 0x0A, 0x02, 0x41, 0x30, 0x32,
+ 0x36, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x32, 0x36,
+ 0x8A, 0x60, 0x0A, 0x04, 0x41, 0x30, 0x32, 0x37,
+ 0xA0, 0x36, 0x94, 0x83, 0x88, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x0A,
+ 0x00, 0x00, 0x0A, 0x00, 0x70, 0x0D, 0x3D, 0x3D,
+ 0x3D, 0x20, 0x41, 0x4C, 0x49, 0x42, 0x20, 0x30,
+ 0x20, 0x2D, 0x20, 0x74, 0x72, 0x75, 0x65, 0x20,
+ 0x3D, 0x3D, 0x3D, 0x00, 0x5B, 0x31, 0x70, 0x0A,
+ 0x0F, 0x41, 0x30, 0x32, 0x37, 0xA4, 0x60, 0xA1,
+ 0x25, 0x70, 0x0D, 0x3D, 0x3D, 0x3D, 0x20, 0x41,
+ 0x4C, 0x49, 0x42, 0x20, 0x30, 0x20, 0x2D, 0x20,
+ 0x66, 0x61, 0x6C, 0x73, 0x65, 0x20, 0x3D, 0x3D,
+ 0x3D, 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x01, 0x41,
+ 0x30, 0x32, 0x37, 0xA4, 0x60, 0xA0, 0x13, 0x93,
+ 0x68, 0x0A, 0x01, 0x70, 0x83, 0x88, 0x69, 0x0A,
+ 0x02, 0x00, 0x60, 0xA4, 0x41, 0x30, 0x32, 0x38,
+ 0x60, 0xA0, 0x26, 0x93, 0x68, 0x0A, 0x02, 0x70,
+ 0x0D, 0x3D, 0x3D, 0x3D, 0x20, 0x41, 0x4C, 0x49,
+ 0x42, 0x20, 0x32, 0x20, 0x2D, 0x20, 0x65, 0x6E,
+ 0x74, 0x65, 0x72, 0x20, 0x3D, 0x3D, 0x3D, 0x00,
+ 0x5B, 0x31, 0xA4, 0x41, 0x30, 0x32, 0x39, 0x69,
+ 0xA0, 0x2E, 0x93, 0x68, 0x0A, 0x03, 0x70, 0x83,
+ 0x88, 0x69, 0x0A, 0x02, 0x00, 0x60, 0x70, 0x0D,
+ 0x3D, 0x3D, 0x3D, 0x20, 0x41, 0x4C, 0x49, 0x42,
+ 0x20, 0x33, 0x20, 0x2D, 0x20, 0x65, 0x6E, 0x74,
+ 0x65, 0x72, 0x20, 0x3D, 0x3D, 0x3D, 0x00, 0x5B,
+ 0x31, 0xA4, 0x41, 0x30, 0x33, 0x30, 0x60, 0xA0,
+ 0x1C, 0x93, 0x68, 0x0A, 0x06, 0x70, 0x83, 0x88,
+ 0x69, 0x0A, 0x04, 0x00, 0x60, 0x70, 0x83, 0x88,
+ 0x69, 0x0A, 0x02, 0x00, 0x61, 0xA4, 0x41, 0x30,
+ 0x33, 0x33, 0x60, 0x61, 0xA0, 0x27, 0x93, 0x68,
+ 0x0A, 0x08, 0x70, 0x83, 0x88, 0x69, 0x0A, 0x02,
+ 0x00, 0x60, 0x70, 0x83, 0x88, 0x69, 0x0A, 0x03,
+ 0x00, 0x61, 0xA0, 0x0A, 0x93, 0x60, 0x0A, 0x01,
+ 0x41, 0x50, 0x54, 0x53, 0x61, 0xA1, 0x06, 0x41,
+ 0x57, 0x41, 0x4B, 0x61, 0xA0, 0x12, 0x93, 0x68,
+ 0x0A, 0x09, 0x70, 0x83, 0x88, 0x69, 0x0A, 0x02,
+ 0x00, 0x60, 0x41, 0x30, 0x33, 0x34, 0x60, 0xA0,
+ 0x13, 0x93, 0x68, 0x0A, 0x0A, 0x70, 0x83, 0x88,
+ 0x69, 0x0A, 0x02, 0x00, 0x60, 0xA4, 0x41, 0x30,
+ 0x33, 0x35, 0x60, 0xA4, 0x0A, 0x00, 0x14, 0x44,
+ 0x08, 0x41, 0x30, 0x33, 0x33, 0x02, 0x70, 0x0D,
+ 0x20, 0x48, 0x6F, 0x74, 0x70, 0x6C, 0x75, 0x67,
+ 0x20, 0x45, 0x6E, 0x74, 0x65, 0x72, 0x20, 0x00,
+ 0x5B, 0x31, 0x70, 0x0A, 0x00, 0x60, 0xA2, 0x1E,
+ 0x95, 0x60, 0x0A, 0x05, 0x70, 0x41, 0x30, 0x39,
+ 0x36, 0x60, 0x69, 0x61, 0xA0, 0x0E, 0x93, 0x61,
+ 0x0A, 0x01, 0x70, 0x41, 0x30, 0x39, 0x37, 0x60,
+ 0x68, 0x61, 0xA5, 0x75, 0x60, 0x70, 0x11, 0x03,
+ 0x0A, 0x0A, 0x67, 0x8B, 0x67, 0x0A, 0x00, 0x41,
+ 0x30, 0x32, 0x35, 0x8C, 0x67, 0x0A, 0x02, 0x41,
+ 0x30, 0x33, 0x36, 0x8C, 0x67, 0x0A, 0x03, 0x41,
+ 0x30, 0x39, 0x38, 0x70, 0x0A, 0x04, 0x41, 0x30,
+ 0x32, 0x35, 0x70, 0x0A, 0x00, 0x41, 0x30, 0x33,
+ 0x36, 0x70, 0x61, 0x41, 0x30, 0x39, 0x38, 0x70,
+ 0x0D, 0x20, 0x48, 0x6F, 0x74, 0x70, 0x6C, 0x75,
+ 0x67, 0x20, 0x45, 0x78, 0x69, 0x74, 0x00, 0x5B,
+ 0x31, 0xA4, 0x67, 0x14, 0x43, 0x0B, 0x41, 0x30,
+ 0x39, 0x36, 0x02, 0x70, 0x73, 0x0D, 0x20, 0x48,
+ 0x6F, 0x74, 0x70, 0x6C, 0x75, 0x67, 0x43, 0x68,
+ 0x65, 0x63, 0x6B, 0x50, 0x6F, 0x72, 0x74, 0x20,
+ 0x50, 0x6F, 0x72, 0x74, 0x20, 0x20, 0x00, 0x98,
+ 0x68, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31,
+ 0xA0, 0x1A, 0x93, 0x68, 0x0A, 0x00, 0xA4, 0x5C,
+ 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57,
+ 0x52, 0x30, 0x41, 0x42, 0x52, 0x30, 0x41, 0x30,
+ 0x38, 0x39, 0x69, 0xA0, 0x1A, 0x93, 0x68, 0x0A,
+ 0x01, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52,
+ 0x31, 0x41, 0x30, 0x38, 0x39, 0x69, 0xA0, 0x1A,
+ 0x93, 0x68, 0x0A, 0x02, 0xA4, 0x5C, 0x2F, 0x04,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30,
+ 0x41, 0x42, 0x52, 0x32, 0x41, 0x30, 0x38, 0x39,
+ 0x69, 0xA0, 0x1A, 0x93, 0x68, 0x0A, 0x03, 0xA4,
+ 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x33, 0x41,
+ 0x30, 0x38, 0x39, 0x69, 0xA0, 0x1A, 0x93, 0x68,
+ 0x0A, 0x04, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42,
+ 0x52, 0x34, 0x41, 0x30, 0x38, 0x39, 0x69, 0x14,
+ 0x43, 0x0B, 0x41, 0x30, 0x39, 0x37, 0x02, 0x70,
+ 0x73, 0x0D, 0x20, 0x48, 0x6F, 0x74, 0x70, 0x6C,
+ 0x75, 0x67, 0x43, 0x68, 0x65, 0x63, 0x6B, 0x50,
+ 0x6F, 0x72, 0x74, 0x20, 0x50, 0x6F, 0x72, 0x74,
+ 0x20, 0x20, 0x00, 0x98, 0x68, 0x00, 0x41, 0x44,
+ 0x42, 0x47, 0x5B, 0x31, 0xA0, 0x1A, 0x93, 0x68,
+ 0x0A, 0x00, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42,
+ 0x52, 0x30, 0x41, 0x30, 0x39, 0x30, 0x69, 0xA0,
+ 0x1A, 0x93, 0x68, 0x0A, 0x01, 0xA4, 0x5C, 0x2F,
+ 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52,
+ 0x30, 0x41, 0x42, 0x52, 0x31, 0x41, 0x30, 0x39,
+ 0x30, 0x69, 0xA0, 0x1A, 0x93, 0x68, 0x0A, 0x02,
+ 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x32,
+ 0x41, 0x30, 0x39, 0x30, 0x69, 0xA0, 0x1A, 0x93,
+ 0x68, 0x0A, 0x03, 0xA4, 0x5C, 0x2F, 0x04, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41,
+ 0x42, 0x52, 0x33, 0x41, 0x30, 0x39, 0x30, 0x69,
+ 0xA0, 0x1A, 0x93, 0x68, 0x0A, 0x04, 0xA4, 0x5C,
+ 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57,
+ 0x52, 0x30, 0x41, 0x42, 0x52, 0x34, 0x41, 0x30,
+ 0x39, 0x30, 0x69, 0x08, 0x41, 0x44, 0x30, 0x30,
+ 0x0A, 0x00, 0x08, 0x44, 0x4B, 0x30, 0x30, 0x0A,
+ 0x00, 0x14, 0x42, 0x04, 0x41, 0x30, 0x32, 0x38,
+ 0x01, 0xA0, 0x0A, 0x93, 0x41, 0x44, 0x30, 0x30,
+ 0x68, 0xA4, 0x0A, 0x00, 0x70, 0x68, 0x41, 0x44,
+ 0x30, 0x30, 0x70, 0x73, 0x0D, 0x20, 0x41, 0x63,
+ 0x2F, 0x44, 0x63, 0x20, 0x73, 0x74, 0x61, 0x74,
+ 0x65, 0x20, 0x63, 0x68, 0x61, 0x6E, 0x67, 0x65,
+ 0x64, 0x20, 0x74, 0x6F, 0x3A, 0x20, 0x00, 0x98,
+ 0x68, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31,
+ 0x41, 0x30, 0x31, 0x31, 0x14, 0x35, 0x41, 0x30,
+ 0x33, 0x35, 0x01, 0x70, 0x68, 0x44, 0x4B, 0x30,
+ 0x30, 0x70, 0x73, 0x0D, 0x20, 0x44, 0x6F, 0x63,
+ 0x6B, 0x20, 0x73, 0x74, 0x61, 0x74, 0x65, 0x20,
+ 0x63, 0x68, 0x61, 0x6E, 0x67, 0x65, 0x64, 0x20,
+ 0x74, 0x6F, 0x3A, 0x20, 0x00, 0x98, 0x68, 0x00,
+ 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x41, 0x30,
+ 0x31, 0x36, 0x08, 0x41, 0x50, 0x30, 0x31, 0x0A,
+ 0x00, 0x08, 0x41, 0x50, 0x30, 0x32, 0x0A, 0x00,
+ 0x08, 0x41, 0x50, 0x30, 0x33, 0x0A, 0x00, 0x08,
+ 0x41, 0x50, 0x30, 0x35, 0x0A, 0x00, 0x08, 0x41,
+ 0x50, 0x30, 0x42, 0x0A, 0xFF, 0x08, 0x41, 0x50,
+ 0x31, 0x30, 0x0A, 0x00, 0x14, 0x41, 0x0B, 0x41,
+ 0x30, 0x32, 0x39, 0x01, 0x70, 0x11, 0x04, 0x0B,
+ 0x00, 0x01, 0x67, 0x8B, 0x67, 0x0A, 0x00, 0x41,
+ 0x30, 0x32, 0x35, 0x70, 0x0A, 0x03, 0x41, 0x30,
+ 0x32, 0x35, 0x8C, 0x67, 0x0A, 0x02, 0x41, 0x30,
+ 0x33, 0x36, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x33,
+ 0x36, 0xA0, 0x33, 0x93, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x0A, 0x00, 0x00, 0x0A, 0x01, 0x70, 0x0D, 0x70,
+ 0x73, 0x70, 0x70, 0x20, 0x70, 0x65, 0x72, 0x66,
+ 0x20, 0x30, 0x20, 0x2D, 0x20, 0x65, 0x78, 0x69,
+ 0x74, 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x02, 0x41,
+ 0x30, 0x33, 0x36, 0xA4, 0x67, 0xA0, 0x32, 0x93,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x0A, 0x00, 0x00, 0x0A,
+ 0x00, 0x70, 0x0D, 0x70, 0x73, 0x70, 0x70, 0x20,
+ 0x6F, 0x66, 0x66, 0x20, 0x30, 0x20, 0x2D, 0x20,
+ 0x65, 0x78, 0x69, 0x74, 0x00, 0x5B, 0x31, 0x70,
+ 0x0A, 0x01, 0x41, 0x30, 0x33, 0x36, 0xA4, 0x67,
+ 0x41, 0x30, 0x33, 0x37, 0x68, 0xA0, 0x0B, 0x92,
+ 0x93, 0x41, 0x50, 0x30, 0x35, 0x0A, 0x01, 0xA4,
+ 0x67, 0x41, 0x30, 0x33, 0x38, 0x70, 0x0A, 0x02,
+ 0x41, 0x30, 0x33, 0x36, 0xA4, 0x67, 0x14, 0x2F,
+ 0x41, 0x30, 0x31, 0x32, 0x00, 0xA0, 0x17, 0x92,
+ 0x94, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x44, 0x41, 0x54, 0x0A, 0x00, 0x00,
+ 0x0A, 0x01, 0xA4, 0x0A, 0x00, 0xA0, 0x0C, 0x92,
+ 0x93, 0x41, 0x50, 0x30, 0x35, 0x0A, 0x01, 0xA4,
+ 0x0A, 0x00, 0x41, 0x30, 0x33, 0x38, 0x14, 0x13,
+ 0x41, 0x30, 0x33, 0x39, 0x01, 0xA0, 0x0C, 0x93,
+ 0x68, 0x0A, 0x03, 0x70, 0x0A, 0x00, 0x41, 0x50,
+ 0x30, 0x31, 0x14, 0x0D, 0x41, 0x30, 0x31, 0x30,
+ 0x01, 0x70, 0x0A, 0x01, 0x41, 0x50, 0x31, 0x30,
+ 0x14, 0x49, 0x09, 0x41, 0x30, 0x33, 0x30, 0x01,
+ 0x70, 0x73, 0x0D, 0x20, 0x50, 0x73, 0x70, 0x70,
+ 0x4D, 0x61, 0x6E, 0x61, 0x67, 0x65, 0x20, 0x5B,
+ 0x53, 0x74, 0x61, 0x74, 0x75, 0x73, 0x5D, 0x20,
+ 0x00, 0x98, 0x68, 0x00, 0x41, 0x44, 0x42, 0x47,
+ 0x5B, 0x31, 0x70, 0x68, 0x41, 0x50, 0x30, 0x35,
+ 0xA0, 0x17, 0x92, 0x94, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x0A, 0x00, 0x00, 0x0A, 0x01, 0xA4, 0x0A, 0x00,
+ 0x70, 0x41, 0x50, 0x30, 0x42, 0x61, 0xA0, 0x20,
+ 0x93, 0x41, 0x50, 0x30, 0x35, 0x0A, 0x00, 0x70,
+ 0x0A, 0x00, 0x60, 0xA2, 0x0C, 0x95, 0x60, 0x0A,
+ 0x05, 0x41, 0x30, 0x34, 0x30, 0x60, 0x75, 0x60,
+ 0x70, 0x0A, 0x00, 0x41, 0x50, 0x30, 0x42, 0x41,
+ 0x30, 0x33, 0x38, 0x70, 0x61, 0x41, 0x50, 0x30,
+ 0x42, 0x70, 0x11, 0x04, 0x0B, 0x00, 0x01, 0x67,
+ 0x70, 0x0A, 0x03, 0x88, 0x67, 0x0A, 0x00, 0x00,
+ 0x70, 0x0A, 0x00, 0x88, 0x67, 0x0A, 0x01, 0x00,
+ 0x70, 0x0A, 0x00, 0x88, 0x67, 0x0A, 0x02, 0x00,
+ 0xA4, 0x67, 0x14, 0x1A, 0x41, 0x30, 0x34, 0x31,
+ 0x00, 0xA0, 0x0E, 0x92, 0x93, 0x41, 0x50, 0x30,
+ 0x42, 0x0A, 0xFF, 0xA4, 0x41, 0x50, 0x30, 0x42,
+ 0xA4, 0x41, 0x44, 0x30, 0x30, 0x14, 0x47, 0x0D,
+ 0x41, 0x30, 0x33, 0x37, 0x01, 0x8B, 0x68, 0x0A,
+ 0x02, 0x41, 0x50, 0x30, 0x36, 0x8B, 0x68, 0x0A,
+ 0x04, 0x41, 0x50, 0x30, 0x37, 0x8B, 0x68, 0x0A,
+ 0x06, 0x41, 0x50, 0x30, 0x38, 0x8C, 0x68, 0x0A,
+ 0x08, 0x41, 0x50, 0x30, 0x39, 0x8C, 0x68, 0x0A,
+ 0x09, 0x41, 0x50, 0x30, 0x41, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x65, 0x72, 0x66, 0x52, 0x65, 0x71,
+ 0x20, 0x43, 0x6C, 0x69, 0x65, 0x6E, 0x74, 0x49,
+ 0x64, 0x3A, 0x00, 0x98, 0x41, 0x50, 0x30, 0x36,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x65, 0x72, 0x66, 0x52,
+ 0x65, 0x71, 0x20, 0x54, 0x79, 0x70, 0x65, 0x3A,
+ 0x20, 0x20, 0x20, 0x20, 0x00, 0x98, 0x41, 0x50,
+ 0x30, 0x39, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x65, 0x72,
+ 0x66, 0x52, 0x65, 0x71, 0x20, 0x44, 0x61, 0x74,
+ 0x61, 0x3A, 0x20, 0x20, 0x20, 0x20, 0x00, 0x98,
+ 0x41, 0x50, 0x30, 0x41, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x0A, 0x00, 0x60, 0xA2,
+ 0x3D, 0x95, 0x60, 0x0A, 0x05, 0xA0, 0x35, 0x93,
+ 0x41, 0x30, 0x34, 0x32, 0x60, 0x41, 0x50, 0x30,
+ 0x36, 0x0A, 0x01, 0xA0, 0x1B, 0x93, 0x7B, 0x41,
+ 0x50, 0x30, 0x37, 0x41, 0x50, 0x30, 0x38, 0x00,
+ 0x0A, 0x01, 0x70, 0x41, 0x30, 0x34, 0x33, 0x60,
+ 0x61, 0x41, 0x30, 0x34, 0x34, 0x60, 0x61, 0xA1,
+ 0x0A, 0x41, 0x30, 0x34, 0x34, 0x60, 0x41, 0x50,
+ 0x30, 0x41, 0xA5, 0x75, 0x60, 0x14, 0x2E, 0x41,
+ 0x30, 0x34, 0x35, 0x00, 0x70, 0x0A, 0x01, 0x41,
+ 0x50, 0x30, 0x32, 0x70, 0x0A, 0x00, 0x60, 0xA2,
+ 0x1C, 0x95, 0x60, 0x0A, 0x05, 0x70, 0x41, 0x30,
+ 0x34, 0x36, 0x60, 0x61, 0xA0, 0x0D, 0x94, 0x61,
+ 0x41, 0x50, 0x30, 0x32, 0x70, 0x61, 0x41, 0x50,
+ 0x30, 0x32, 0x75, 0x60, 0x14, 0x2E, 0x41, 0x30,
+ 0x34, 0x37, 0x00, 0x70, 0x0A, 0x00, 0x41, 0x50,
+ 0x30, 0x33, 0x70, 0x0A, 0x00, 0x60, 0xA2, 0x1C,
+ 0x95, 0x60, 0x0A, 0x05, 0x70, 0x41, 0x30, 0x34,
+ 0x38, 0x60, 0x61, 0xA0, 0x0D, 0x94, 0x61, 0x41,
+ 0x50, 0x30, 0x33, 0x70, 0x61, 0x41, 0x50, 0x30,
+ 0x33, 0x75, 0x60, 0x14, 0x46, 0x19, 0x41, 0x30,
+ 0x33, 0x38, 0x00, 0x70, 0x0D, 0x50, 0x73, 0x70,
+ 0x70, 0x50, 0x72, 0x6F, 0x63, 0x65, 0x73, 0x73,
+ 0x53, 0x74, 0x61, 0x74, 0x65, 0x20, 0x45, 0x6E,
+ 0x74, 0x65, 0x72, 0x00, 0x5B, 0x31, 0x41, 0x30,
+ 0x34, 0x37, 0x70, 0x73, 0x0D, 0x20, 0x47, 0x6C,
+ 0x6F, 0x62, 0x61, 0x6C, 0x20, 0x4F, 0x76, 0x65,
+ 0x72, 0x72, 0x69, 0x64, 0x65, 0x20, 0x20, 0x00,
+ 0x98, 0x41, 0x50, 0x30, 0x33, 0x00, 0x41, 0x44,
+ 0x42, 0x47, 0x5B, 0x31, 0x41, 0x30, 0x34, 0x35,
+ 0x70, 0x73, 0x0D, 0x20, 0x41, 0x67, 0x67, 0x72,
+ 0x65, 0x67, 0x61, 0x74, 0x65, 0x64, 0x20, 0x54,
+ 0x61, 0x72, 0x67, 0x65, 0x74, 0x20, 0x20, 0x53,
+ 0x70, 0x65, 0x65, 0x64, 0x20, 0x20, 0x00, 0x98,
+ 0x41, 0x50, 0x30, 0x32, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x41,
+ 0x67, 0x67, 0x72, 0x65, 0x67, 0x61, 0x74, 0x65,
+ 0x64, 0x20, 0x43, 0x75, 0x72, 0x72, 0x65, 0x6E,
+ 0x74, 0x20, 0x53, 0x70, 0x65, 0x65, 0x64, 0x20,
+ 0x20, 0x00, 0x98, 0x41, 0x50, 0x30, 0x31, 0x00,
+ 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0xA0, 0x17,
+ 0x92, 0x93, 0x41, 0x50, 0x30, 0x32, 0x41, 0x50,
+ 0x30, 0x31, 0x41, 0x30, 0x31, 0x37, 0x41, 0x50,
+ 0x30, 0x32, 0x41, 0x50, 0x30, 0x31, 0xA0, 0x21,
+ 0x94, 0x41, 0x50, 0x30, 0x32, 0x41, 0x50, 0x30,
+ 0x31, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x30, 0x34, 0x39, 0x41, 0x50, 0x30, 0x32, 0x70,
+ 0x41, 0x50, 0x30, 0x32, 0x41, 0x50, 0x30, 0x31,
+ 0x70, 0x0A, 0x00, 0x60, 0xA2, 0x40, 0x05, 0x95,
+ 0x60, 0x0A, 0x05, 0x70, 0x41, 0x30, 0x34, 0x36,
+ 0x60, 0x61, 0x70, 0x41, 0x30, 0x35, 0x30, 0x60,
+ 0x62, 0xA0, 0x0B, 0x92, 0x93, 0x61, 0x62, 0x41,
+ 0x30, 0x35, 0x31, 0x60, 0x61, 0xA1, 0x2D, 0xA0,
+ 0x2B, 0x93, 0x41, 0x50, 0x31, 0x30, 0x0A, 0x01,
+ 0x70, 0x0D, 0x50, 0x6F, 0x72, 0x74, 0x20, 0x73,
+ 0x70, 0x65, 0x65, 0x64, 0x20, 0x63, 0x68, 0x61,
+ 0x6E, 0x67, 0x65, 0x20, 0x66, 0x6F, 0x72, 0x63,
+ 0x65, 0x64, 0x00, 0x5B, 0x31, 0x41, 0x30, 0x35,
+ 0x31, 0x60, 0x61, 0x75, 0x60, 0xA0, 0x21, 0x95,
+ 0x41, 0x50, 0x30, 0x32, 0x41, 0x50, 0x30, 0x31,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30,
+ 0x34, 0x39, 0x41, 0x50, 0x30, 0x32, 0x70, 0x41,
+ 0x50, 0x30, 0x32, 0x41, 0x50, 0x30, 0x31, 0xA1,
+ 0x21, 0xA0, 0x1F, 0x93, 0x41, 0x50, 0x31, 0x30,
+ 0x0A, 0x01, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x30, 0x34, 0x39, 0x41, 0x50, 0x30, 0x32,
+ 0x70, 0x41, 0x50, 0x30, 0x32, 0x41, 0x50, 0x30,
+ 0x31, 0x70, 0x0A, 0x00, 0x41, 0x50, 0x31, 0x30,
+ 0x70, 0x0D, 0x50, 0x73, 0x70, 0x70, 0x50, 0x72,
+ 0x6F, 0x63, 0x65, 0x73, 0x73, 0x53, 0x74, 0x61,
+ 0x74, 0x65, 0x20, 0x45, 0x78, 0x69, 0x74, 0x00,
+ 0x5B, 0x31, 0x14, 0x40, 0x0E, 0x41, 0x30, 0x35,
+ 0x31, 0x02, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x73,
+ 0x70, 0x70, 0x52, 0x65, 0x71, 0x75, 0x65, 0x73,
+ 0x74, 0x50, 0x6F, 0x72, 0x74, 0x53, 0x70, 0x65,
+ 0x65, 0x64, 0x20, 0x50, 0x6F, 0x72, 0x74, 0x20,
+ 0x20, 0x00, 0x98, 0x68, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x53, 0x70, 0x65, 0x65, 0x64,
+ 0x20, 0x20, 0x00, 0x98, 0x69, 0x00, 0x41, 0x44,
+ 0x42, 0x47, 0x5B, 0x31, 0xA0, 0x1A, 0x93, 0x68,
+ 0x0A, 0x00, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42,
+ 0x52, 0x30, 0x41, 0x30, 0x35, 0x32, 0x69, 0xA0,
+ 0x1A, 0x93, 0x68, 0x0A, 0x01, 0xA4, 0x5C, 0x2F,
+ 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52,
+ 0x30, 0x41, 0x42, 0x52, 0x31, 0x41, 0x30, 0x35,
+ 0x32, 0x69, 0xA0, 0x1A, 0x93, 0x68, 0x0A, 0x02,
+ 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x32,
+ 0x41, 0x30, 0x35, 0x32, 0x69, 0xA0, 0x1A, 0x93,
+ 0x68, 0x0A, 0x03, 0xA4, 0x5C, 0x2F, 0x04, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41,
+ 0x42, 0x52, 0x33, 0x41, 0x30, 0x35, 0x32, 0x69,
+ 0xA0, 0x1A, 0x93, 0x68, 0x0A, 0x04, 0xA4, 0x5C,
+ 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57,
+ 0x52, 0x30, 0x41, 0x42, 0x52, 0x34, 0x41, 0x30,
+ 0x35, 0x32, 0x69, 0x14, 0x49, 0x08, 0x41, 0x30,
+ 0x35, 0x30, 0x01, 0xA0, 0x19, 0x93, 0x68, 0x0A,
+ 0x00, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52,
+ 0x30, 0x41, 0x30, 0x35, 0x33, 0xA0, 0x19, 0x93,
+ 0x68, 0x0A, 0x01, 0xA4, 0x5C, 0x2F, 0x04, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41,
+ 0x42, 0x52, 0x31, 0x41, 0x30, 0x35, 0x33, 0xA0,
+ 0x19, 0x93, 0x68, 0x0A, 0x02, 0xA4, 0x5C, 0x2F,
+ 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52,
+ 0x30, 0x41, 0x42, 0x52, 0x32, 0x41, 0x30, 0x35,
+ 0x33, 0xA0, 0x19, 0x93, 0x68, 0x0A, 0x03, 0xA4,
+ 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x33, 0x41,
+ 0x30, 0x35, 0x33, 0xA0, 0x19, 0x93, 0x68, 0x0A,
+ 0x04, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52,
+ 0x34, 0x41, 0x30, 0x35, 0x33, 0x14, 0x49, 0x08,
+ 0x41, 0x30, 0x34, 0x36, 0x01, 0xA0, 0x19, 0x93,
+ 0x68, 0x0A, 0x00, 0xA4, 0x5C, 0x2F, 0x04, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41,
+ 0x42, 0x52, 0x30, 0x41, 0x30, 0x35, 0x34, 0xA0,
+ 0x19, 0x93, 0x68, 0x0A, 0x01, 0xA4, 0x5C, 0x2F,
+ 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52,
+ 0x30, 0x41, 0x42, 0x52, 0x31, 0x41, 0x30, 0x35,
+ 0x34, 0xA0, 0x19, 0x93, 0x68, 0x0A, 0x02, 0xA4,
+ 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x32, 0x41,
+ 0x30, 0x35, 0x34, 0xA0, 0x19, 0x93, 0x68, 0x0A,
+ 0x03, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52,
+ 0x33, 0x41, 0x30, 0x35, 0x34, 0xA0, 0x19, 0x93,
+ 0x68, 0x0A, 0x04, 0xA4, 0x5C, 0x2F, 0x04, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41,
+ 0x42, 0x52, 0x34, 0x41, 0x30, 0x35, 0x34, 0x14,
+ 0x49, 0x08, 0x41, 0x30, 0x34, 0x38, 0x01, 0xA0,
+ 0x19, 0x93, 0x68, 0x0A, 0x00, 0xA4, 0x5C, 0x2F,
+ 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52,
+ 0x30, 0x41, 0x42, 0x52, 0x30, 0x41, 0x30, 0x35,
+ 0x35, 0xA0, 0x19, 0x93, 0x68, 0x0A, 0x01, 0xA4,
+ 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x31, 0x41,
+ 0x30, 0x35, 0x35, 0xA0, 0x19, 0x93, 0x68, 0x0A,
+ 0x02, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52,
+ 0x32, 0x41, 0x30, 0x35, 0x35, 0xA0, 0x19, 0x93,
+ 0x68, 0x0A, 0x03, 0xA4, 0x5C, 0x2F, 0x04, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41,
+ 0x42, 0x52, 0x33, 0x41, 0x30, 0x35, 0x35, 0xA0,
+ 0x19, 0x93, 0x68, 0x0A, 0x04, 0xA4, 0x5C, 0x2F,
+ 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52,
+ 0x30, 0x41, 0x42, 0x52, 0x34, 0x41, 0x30, 0x35,
+ 0x35, 0x14, 0x49, 0x08, 0x41, 0x30, 0x34, 0x33,
+ 0x01, 0xA0, 0x19, 0x93, 0x68, 0x0A, 0x00, 0xA4,
+ 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x30, 0x41,
+ 0x30, 0x35, 0x36, 0xA0, 0x19, 0x93, 0x68, 0x0A,
+ 0x01, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52,
+ 0x31, 0x41, 0x30, 0x35, 0x36, 0xA0, 0x19, 0x93,
+ 0x68, 0x0A, 0x02, 0xA4, 0x5C, 0x2F, 0x04, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41,
+ 0x42, 0x52, 0x32, 0x41, 0x30, 0x35, 0x36, 0xA0,
+ 0x19, 0x93, 0x68, 0x0A, 0x03, 0xA4, 0x5C, 0x2F,
+ 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52,
+ 0x30, 0x41, 0x42, 0x52, 0x33, 0x41, 0x30, 0x35,
+ 0x36, 0xA0, 0x19, 0x93, 0x68, 0x0A, 0x04, 0xA4,
+ 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x34, 0x41,
+ 0x30, 0x35, 0x36, 0x14, 0x45, 0x0B, 0x41, 0x30,
+ 0x34, 0x34, 0x02, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x73, 0x70, 0x70, 0x53, 0x65, 0x74, 0x50, 0x6F,
+ 0x72, 0x74, 0x52, 0x65, 0x71, 0x75, 0x65, 0x73,
+ 0x74, 0x20, 0x50, 0x6F, 0x72, 0x74, 0x20, 0x20,
+ 0x00, 0x98, 0x68, 0x00, 0x41, 0x44, 0x42, 0x47,
+ 0x5B, 0x31, 0xA0, 0x1A, 0x93, 0x68, 0x0A, 0x00,
+ 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x30,
+ 0x41, 0x30, 0x35, 0x37, 0x69, 0xA0, 0x1A, 0x93,
+ 0x68, 0x0A, 0x01, 0xA4, 0x5C, 0x2F, 0x04, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41,
+ 0x42, 0x52, 0x31, 0x41, 0x30, 0x35, 0x37, 0x69,
+ 0xA0, 0x1A, 0x93, 0x68, 0x0A, 0x02, 0xA4, 0x5C,
+ 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57,
+ 0x52, 0x30, 0x41, 0x42, 0x52, 0x32, 0x41, 0x30,
+ 0x35, 0x37, 0x69, 0xA0, 0x1A, 0x93, 0x68, 0x0A,
+ 0x03, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52,
+ 0x33, 0x41, 0x30, 0x35, 0x37, 0x69, 0xA0, 0x1A,
+ 0x93, 0x68, 0x0A, 0x04, 0xA4, 0x5C, 0x2F, 0x04,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30,
+ 0x41, 0x42, 0x52, 0x34, 0x41, 0x30, 0x35, 0x37,
+ 0x69, 0x14, 0x4E, 0x08, 0x41, 0x30, 0x34, 0x32,
+ 0x02, 0xA0, 0x1A, 0x93, 0x68, 0x0A, 0x00, 0xA4,
+ 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x30, 0x41,
+ 0x30, 0x35, 0x38, 0x69, 0xA0, 0x1A, 0x93, 0x68,
+ 0x0A, 0x01, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42,
+ 0x52, 0x31, 0x41, 0x30, 0x35, 0x38, 0x69, 0xA0,
+ 0x1A, 0x93, 0x68, 0x0A, 0x02, 0xA4, 0x5C, 0x2F,
+ 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52,
+ 0x30, 0x41, 0x42, 0x52, 0x32, 0x41, 0x30, 0x35,
+ 0x38, 0x69, 0xA0, 0x1A, 0x93, 0x68, 0x0A, 0x03,
+ 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x33,
+ 0x41, 0x30, 0x35, 0x38, 0x69, 0xA0, 0x1A, 0x93,
+ 0x68, 0x0A, 0x04, 0xA4, 0x5C, 0x2F, 0x04, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41,
+ 0x42, 0x52, 0x34, 0x41, 0x30, 0x35, 0x38, 0x69,
+ 0x14, 0x49, 0x08, 0x41, 0x30, 0x34, 0x30, 0x01,
+ 0xA0, 0x19, 0x93, 0x68, 0x0A, 0x00, 0xA4, 0x5C,
+ 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57,
+ 0x52, 0x30, 0x41, 0x42, 0x52, 0x30, 0x41, 0x30,
+ 0x35, 0x39, 0xA0, 0x19, 0x93, 0x68, 0x0A, 0x01,
+ 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x31,
+ 0x41, 0x30, 0x35, 0x39, 0xA0, 0x19, 0x93, 0x68,
+ 0x0A, 0x02, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42,
+ 0x52, 0x32, 0x41, 0x30, 0x35, 0x39, 0xA0, 0x19,
+ 0x93, 0x68, 0x0A, 0x03, 0xA4, 0x5C, 0x2F, 0x04,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30,
+ 0x41, 0x42, 0x52, 0x33, 0x41, 0x30, 0x35, 0x39,
+ 0xA0, 0x19, 0x93, 0x68, 0x0A, 0x04, 0xA4, 0x5C,
+ 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57,
+ 0x52, 0x30, 0x41, 0x42, 0x52, 0x34, 0x41, 0x30,
+ 0x35, 0x39, 0x14, 0x49, 0x08, 0x41, 0x30, 0x33,
+ 0x34, 0x01, 0xA0, 0x19, 0x93, 0x68, 0x0A, 0x00,
+ 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x30,
+ 0x41, 0x30, 0x36, 0x30, 0xA0, 0x19, 0x93, 0x68,
+ 0x0A, 0x01, 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30, 0x41, 0x42,
+ 0x52, 0x31, 0x41, 0x30, 0x36, 0x30, 0xA0, 0x19,
+ 0x93, 0x68, 0x0A, 0x02, 0xA4, 0x5C, 0x2F, 0x04,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57, 0x52, 0x30,
+ 0x41, 0x42, 0x52, 0x32, 0x41, 0x30, 0x36, 0x30,
+ 0xA0, 0x19, 0x93, 0x68, 0x0A, 0x03, 0xA4, 0x5C,
+ 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x57,
+ 0x52, 0x30, 0x41, 0x42, 0x52, 0x33, 0x41, 0x30,
+ 0x36, 0x30, 0xA0, 0x19, 0x93, 0x68, 0x0A, 0x04,
+ 0xA4, 0x5C, 0x2F, 0x04, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x57, 0x52, 0x30, 0x41, 0x42, 0x52, 0x34,
+ 0x41, 0x30, 0x36, 0x30, 0x5B, 0x80, 0x41, 0x31,
+ 0x32, 0x30, 0x00, 0x72, 0x41, 0x47, 0x52, 0x42,
+ 0x0C, 0x00, 0x30, 0x0C, 0x00, 0x00, 0x0B, 0x00,
+ 0x10, 0x5B, 0x81, 0x18, 0x41, 0x31, 0x32, 0x30,
+ 0x01, 0x00, 0x40, 0x6E, 0x00, 0x13, 0x41, 0x30,
+ 0x32, 0x33, 0x07, 0x00, 0x46, 0x8E, 0x41, 0x30,
+ 0x30, 0x38, 0x01, 0x5B, 0x80, 0x41, 0x31, 0x32,
+ 0x31, 0x00, 0x72, 0x41, 0x47, 0x52, 0x42, 0x0C,
+ 0x00, 0x40, 0x0C, 0x00, 0x00, 0x0B, 0x00, 0x10,
+ 0x5B, 0x81, 0x2F, 0x41, 0x31, 0x32, 0x31, 0x01,
+ 0x00, 0x40, 0x92, 0x00, 0x16, 0x41, 0x30, 0x32,
+ 0x34, 0x01, 0x41, 0x31, 0x32, 0x32, 0x04, 0x00,
+ 0x05, 0x00, 0x05, 0x41, 0x30, 0x32, 0x30, 0x07,
+ 0x00, 0x44, 0x73, 0x00, 0x08, 0x41, 0x30, 0x32,
+ 0x32, 0x03, 0x00, 0x03, 0x41, 0x30, 0x32, 0x31,
+ 0x02, 0x5B, 0x81, 0x21, 0x41, 0x31, 0x32, 0x31,
+ 0x01, 0x00, 0x40, 0xAE, 0x00, 0x02, 0x41, 0x31,
+ 0x32, 0x33, 0x03, 0x00, 0x02, 0x41, 0x31, 0x32,
+ 0x34, 0x01, 0x00, 0x48, 0x07, 0x00, 0x03, 0x41,
+ 0x31, 0x32, 0x35, 0x01, 0x5B, 0x80, 0x41, 0x31,
+ 0x32, 0x36, 0x00, 0x72, 0x41, 0x47, 0x52, 0x42,
+ 0x0C, 0x00, 0x50, 0x0C, 0x00, 0x00, 0x0B, 0x00,
+ 0x10, 0x5B, 0x81, 0x10, 0x41, 0x31, 0x32, 0x36,
+ 0x01, 0x00, 0x40, 0xB8, 0x00, 0x0E, 0x41, 0x31,
+ 0x32, 0x37, 0x01, 0x5B, 0x80, 0x41, 0x31, 0x30,
+ 0x33, 0x00, 0x41, 0x47, 0x52, 0x42, 0x0B, 0x00,
+ 0x10, 0x5B, 0x81, 0x26, 0x41, 0x31, 0x30, 0x33,
+ 0x01, 0x00, 0x40, 0x30, 0x41, 0x31, 0x30, 0x34,
+ 0x20, 0x00, 0x40, 0x2A, 0x41, 0x31, 0x30, 0x35,
+ 0x20, 0x00, 0x40, 0x06, 0x41, 0x31, 0x30, 0x36,
+ 0x20, 0x00, 0x40, 0x16, 0x41, 0x31, 0x30, 0x37,
+ 0x20, 0x5B, 0x87, 0x17, 0x41, 0x31, 0x30, 0x33,
+ 0x41, 0x31, 0x30, 0x36, 0x0C, 0x01, 0x00, 0x21,
+ 0x00, 0x03, 0x00, 0x40, 0x36, 0x41, 0x31, 0x30,
+ 0x38, 0x01, 0x5B, 0x87, 0x1C, 0x41, 0x31, 0x30,
+ 0x33, 0x41, 0x31, 0x30, 0x35, 0x0C, 0x00, 0x00,
+ 0x10, 0xC2, 0x03, 0x00, 0x40, 0x5E, 0x41, 0x31,
+ 0x30, 0x39, 0x01, 0x41, 0x31, 0x31, 0x30, 0x10,
+ 0x5B, 0x87, 0x1C, 0x41, 0x31, 0x30, 0x33, 0x41,
+ 0x31, 0x30, 0x35, 0x0C, 0x04, 0x00, 0x10, 0xC2,
+ 0x03, 0x00, 0x40, 0x5E, 0x41, 0x31, 0x31, 0x31,
+ 0x01, 0x41, 0x31, 0x31, 0x32, 0x01, 0x5B, 0x87,
+ 0x17, 0x41, 0x31, 0x30, 0x33, 0x41, 0x31, 0x30,
+ 0x35, 0x0C, 0x3C, 0x00, 0x10, 0xC2, 0x03, 0x00,
+ 0x40, 0x5E, 0x41, 0x31, 0x31, 0x33, 0x20, 0x5B,
+ 0x87, 0x23, 0x41, 0x31, 0x30, 0x33, 0x41, 0x31,
+ 0x30, 0x35, 0x0C, 0xD8, 0xF9, 0x03, 0x00, 0x03,
+ 0x00, 0x40, 0x5E, 0x41, 0x31, 0x31, 0x34, 0x01,
+ 0x41, 0x31, 0x31, 0x35, 0x01, 0x00, 0x03, 0x41,
+ 0x31, 0x31, 0x36, 0x01, 0x5B, 0x87, 0x16, 0x41,
+ 0x31, 0x30, 0x33, 0x41, 0x31, 0x30, 0x37, 0x0A,
+ 0x00, 0x03, 0x00, 0x40, 0x7E, 0x00, 0x04, 0x41,
+ 0x31, 0x31, 0x37, 0x01, 0x5B, 0x80, 0x41, 0x31,
+ 0x31, 0x38, 0x00, 0x72, 0x41, 0x47, 0x52, 0x42,
+ 0x0B, 0x00, 0x80, 0x00, 0x0B, 0x00, 0x10, 0x5B,
+ 0x81, 0x0B, 0x41, 0x31, 0x31, 0x38, 0x03, 0x41,
+ 0x31, 0x31, 0x39, 0x20, 0x14, 0x48, 0x07, 0x41,
+ 0x30, 0x34, 0x39, 0x01, 0x70, 0x73, 0x0D, 0x20,
+ 0x50, 0x43, 0x49, 0x65, 0x20, 0x56, 0x49, 0x44,
+ 0x20, 0x3A, 0x00, 0x98, 0x68, 0x00, 0x41, 0x44,
+ 0x42, 0x47, 0x5B, 0x31, 0xA0, 0x16, 0x93, 0x68,
+ 0x0A, 0x01, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x0A,
+ 0x01, 0x00, 0x60, 0xA0, 0x16, 0x93, 0x68, 0x0A,
+ 0x02, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x0A, 0x02,
+ 0x00, 0x60, 0xA0, 0x09, 0x94, 0x60, 0x0A, 0xF7,
+ 0x70, 0x0A, 0xF7, 0x60, 0x70, 0x77, 0x0B, 0x71,
+ 0x02, 0x72, 0x74, 0x0A, 0xF7, 0x60, 0x61, 0x0A,
+ 0x01, 0x00, 0x00, 0x62, 0x78, 0x77, 0x62, 0x0A,
+ 0x04, 0x62, 0x0A, 0x64, 0x63, 0x64, 0x41, 0x31,
+ 0x32, 0x38, 0x0A, 0x3A, 0x64, 0x14, 0x06, 0x41,
+ 0x30, 0x39, 0x31, 0x03, 0x14, 0x42, 0x10, 0x41,
+ 0x31, 0x32, 0x38, 0x0A, 0x70, 0x0D, 0x20, 0x47,
+ 0x6E, 0x62, 0x53, 0x6D, 0x75, 0x53, 0x65, 0x72,
+ 0x76, 0x69, 0x63, 0x65, 0x52, 0x65, 0x71, 0x20,
+ 0x45, 0x6E, 0x74, 0x65, 0x72, 0x00, 0x5B, 0x31,
+ 0x70, 0x73, 0x0D, 0x20, 0x20, 0x53, 0x6D, 0x75,
+ 0x20, 0x73, 0x65, 0x72, 0x76, 0x69, 0x63, 0x65,
+ 0x20, 0x69, 0x64, 0x20, 0x3D, 0x20, 0x00, 0x98,
+ 0x68, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31,
+ 0x70, 0x73, 0x0D, 0x20, 0x20, 0x53, 0x6D, 0x75,
+ 0x20, 0x73, 0x65, 0x72, 0x76, 0x69, 0x63, 0x65,
+ 0x20, 0x61, 0x72, 0x67, 0x75, 0x6D, 0x65, 0x6E,
+ 0x74, 0x20, 0x3D, 0x20, 0x00, 0x98, 0x69, 0x00,
+ 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0xA2, 0x20,
+ 0x92, 0x93, 0x41, 0x31, 0x31, 0x32, 0x0A, 0x01,
+ 0x70, 0x0D, 0x2D, 0x2D, 0x57, 0x61, 0x69, 0x74,
+ 0x20, 0x49, 0x6E, 0x69, 0x74, 0x20, 0x44, 0x6F,
+ 0x6E, 0x65, 0x2D, 0x2D, 0x00, 0x5B, 0x31, 0x70,
+ 0x69, 0x41, 0x31, 0x31, 0x33, 0x70, 0x68, 0x41,
+ 0x31, 0x31, 0x30, 0x80, 0x41, 0x31, 0x30, 0x39,
+ 0x41, 0x31, 0x30, 0x39, 0xA2, 0x1F, 0x92, 0x93,
+ 0x41, 0x31, 0x31, 0x31, 0x0A, 0x01, 0x70, 0x0D,
+ 0x2D, 0x2D, 0x57, 0x61, 0x69, 0x74, 0x20, 0x49,
+ 0x6E, 0x69, 0x74, 0x20, 0x41, 0x63, 0x6B, 0x2D,
+ 0x2D, 0x00, 0x5B, 0x31, 0xA2, 0x20, 0x92, 0x93,
+ 0x41, 0x31, 0x31, 0x32, 0x0A, 0x01, 0x70, 0x0D,
+ 0x2D, 0x2D, 0x57, 0x61, 0x69, 0x74, 0x20, 0x49,
+ 0x6E, 0x69, 0x74, 0x20, 0x44, 0x6F, 0x6E, 0x65,
+ 0x2D, 0x2D, 0x00, 0x5B, 0x31, 0x70, 0x41, 0x31,
+ 0x31, 0x33, 0x60, 0x70, 0x0D, 0x47, 0x6E, 0x62,
+ 0x53, 0x6D, 0x75, 0x53, 0x65, 0x72, 0x76, 0x69,
+ 0x63, 0x65, 0x52, 0x65, 0x71, 0x20, 0x45, 0x78,
+ 0x69, 0x74, 0x00, 0x5B, 0x31, 0xA4, 0x60, 0x14,
+ 0x1C, 0x41, 0x30, 0x36, 0x33, 0x01, 0xA0, 0x0C,
+ 0x93, 0x68, 0x0A, 0x01, 0x70, 0x0A, 0x00, 0x41,
+ 0x31, 0x30, 0x38, 0xA1, 0x08, 0x70, 0x0A, 0x01,
+ 0x41, 0x31, 0x30, 0x38, 0x14, 0x4A, 0x04, 0x41,
+ 0x30, 0x30, 0x36, 0x01, 0x70, 0x41, 0x31, 0x32,
+ 0x37, 0x60, 0xA0, 0x1F, 0x93, 0x68, 0x0A, 0x00,
+ 0x70, 0x0A, 0x01, 0x41, 0x31, 0x32, 0x37, 0x70,
+ 0x0D, 0x20, 0x4D, 0x65, 0x6D, 0x20, 0x50, 0x53,
+ 0x20, 0x4F, 0x46, 0x46, 0x21, 0x21, 0x21, 0x00,
+ 0x5B, 0x31, 0xA1, 0x1A, 0x70, 0x0A, 0x00, 0x41,
+ 0x31, 0x32, 0x37, 0x70, 0x0D, 0x20, 0x4D, 0x65,
+ 0x6D, 0x20, 0x50, 0x53, 0x20, 0x4F, 0x4E, 0x21,
+ 0x21, 0x21, 0x00, 0x5B, 0x31, 0xA4, 0x60, 0x08,
+ 0x41, 0x31, 0x32, 0x39, 0x0A, 0x00, 0x08, 0x41,
+ 0x31, 0x33, 0x30, 0x0A, 0x00, 0x14, 0x4A, 0x0B,
+ 0x41, 0x30, 0x30, 0x35, 0x01, 0xA0, 0x25, 0x93,
+ 0x41, 0x31, 0x32, 0x39, 0x0A, 0x00, 0xA0, 0x15,
+ 0x92, 0x93, 0x41, 0x31, 0x31, 0x39, 0x0C, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0x70, 0x41, 0x31, 0x31, 0x35,
+ 0x41, 0x31, 0x33, 0x30, 0x70, 0x0A, 0x01, 0x41,
+ 0x31, 0x32, 0x39, 0xA0, 0x4C, 0x08, 0x93, 0x41,
+ 0x31, 0x33, 0x30, 0x0A, 0x01, 0xA0, 0x40, 0x06,
+ 0x93, 0x68, 0x0A, 0x00, 0xA0, 0x30, 0x93, 0x44,
+ 0x4B, 0x30, 0x30, 0x0A, 0x01, 0x70, 0x0D, 0x20,
+ 0x41, 0x43, 0x2F, 0x55, 0x6E, 0x64, 0x6F, 0x63,
+ 0x6B, 0x65, 0x64, 0x20, 0x73, 0x6F, 0x20, 0x65,
+ 0x6E, 0x61, 0x62, 0x6C, 0x65, 0x20, 0x42, 0x41,
+ 0x50, 0x4D, 0x00, 0x5B, 0x31, 0x41, 0x31, 0x32,
+ 0x38, 0x0A, 0x30, 0x0A, 0x00, 0xA1, 0x28, 0x70,
+ 0x0D, 0x20, 0x41, 0x43, 0x2F, 0x44, 0x6F, 0x63,
+ 0x6B, 0x65, 0x64, 0x20, 0x73, 0x6F, 0x20, 0x64,
+ 0x69, 0x73, 0x61, 0x62, 0x6C, 0x65, 0x20, 0x42,
+ 0x41, 0x50, 0x4D, 0x00, 0x5B, 0x31, 0x41, 0x31,
+ 0x32, 0x38, 0x0A, 0x31, 0x0A, 0x00, 0xA1, 0x21,
+ 0x70, 0x0D, 0x20, 0x44, 0x43, 0x20, 0x73, 0x6F,
+ 0x20, 0x64, 0x69, 0x73, 0x61, 0x62, 0x6C, 0x65,
+ 0x20, 0x42, 0x41, 0x50, 0x4D, 0x00, 0x5B, 0x31,
+ 0x41, 0x31, 0x32, 0x38, 0x0A, 0x31, 0x0A, 0x00,
+ 0x14, 0x39, 0x41, 0x31, 0x33, 0x31, 0x01, 0xA0,
+ 0x1A, 0x93, 0x68, 0x0A, 0x01, 0x70, 0x0D, 0x20,
+ 0x54, 0x44, 0x43, 0x3A, 0x20, 0x4F, 0x6E, 0x00,
+ 0x5B, 0x31, 0x41, 0x31, 0x32, 0x38, 0x0A, 0x2E,
+ 0x0A, 0x00, 0xA1, 0x17, 0x70, 0x0D, 0x20, 0x54,
+ 0x44, 0x43, 0x3A, 0x20, 0x4F, 0x66, 0x66, 0x00,
+ 0x5B, 0x31, 0x41, 0x31, 0x32, 0x38, 0x0A, 0x2F,
+ 0x0A, 0x00, 0x14, 0x3F, 0x41, 0x31, 0x33, 0x32,
+ 0x01, 0xA0, 0x1D, 0x93, 0x68, 0x0A, 0x01, 0x70,
+ 0x0D, 0x20, 0x50, 0x6B, 0x67, 0x50, 0x77, 0x72,
+ 0x3A, 0x20, 0x4F, 0x6E, 0x00, 0x5B, 0x31, 0x41,
+ 0x31, 0x32, 0x38, 0x0A, 0x51, 0x0A, 0x00, 0xA1,
+ 0x1A, 0x70, 0x0D, 0x20, 0x50, 0x6B, 0x67, 0x50,
+ 0x77, 0x72, 0x3A, 0x20, 0x4F, 0x66, 0x66, 0x00,
+ 0x5B, 0x31, 0x41, 0x31, 0x32, 0x38, 0x0A, 0x52,
+ 0x0A, 0x00, 0x14, 0x3F, 0x41, 0x31, 0x33, 0x33,
+ 0x01, 0xA0, 0x19, 0x93, 0x68, 0x0A, 0x01, 0x70,
+ 0x0D, 0x20, 0x56, 0x50, 0x43, 0x3A, 0x20, 0x4F,
+ 0x6E, 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x01, 0x41,
+ 0x31, 0x31, 0x34, 0xA1, 0x16, 0x70, 0x0D, 0x20,
+ 0x56, 0x50, 0x43, 0x3A, 0x20, 0x4F, 0x66, 0x66,
+ 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x00, 0x41, 0x31,
+ 0x31, 0x34, 0x41, 0x31, 0x32, 0x38, 0x0A, 0x0C,
+ 0x0A, 0x00, 0x14, 0x46, 0x0D, 0x41, 0x30, 0x30,
+ 0x39, 0x01, 0xA0, 0x46, 0x05, 0x93, 0x68, 0x0A,
+ 0x01, 0x70, 0x0D, 0x20, 0x44, 0x50, 0x4D, 0x3A,
+ 0x20, 0x6E, 0x6F, 0x20, 0x6D, 0x61, 0x73, 0x6B,
+ 0x00, 0x5B, 0x31, 0x41, 0x31, 0x32, 0x38, 0x0A,
+ 0x58, 0x0A, 0x00, 0x70, 0x0D, 0x20, 0x43, 0x6C,
+ 0x72, 0x20, 0x54, 0x64, 0x70, 0x4C, 0x69, 0x6D,
+ 0x69, 0x74, 0x44, 0x69, 0x73, 0x00, 0x5B, 0x31,
+ 0x70, 0x0A, 0x00, 0x41, 0x31, 0x32, 0x35, 0x41,
+ 0x31, 0x33, 0x33, 0x0A, 0x01, 0x41, 0x31, 0x33,
+ 0x32, 0x0A, 0x01, 0x41, 0x31, 0x33, 0x31, 0x0A,
+ 0x01, 0x41, 0x30, 0x30, 0x35, 0x41, 0x44, 0x30,
+ 0x30, 0xA1, 0x4A, 0x06, 0x41, 0x30, 0x30, 0x35,
+ 0x41, 0x44, 0x30, 0x30, 0x41, 0x31, 0x33, 0x31,
+ 0x0A, 0x00, 0x41, 0x31, 0x33, 0x32, 0x0A, 0x00,
+ 0x41, 0x31, 0x33, 0x33, 0x0A, 0x00, 0x70, 0x0D,
+ 0x20, 0x53, 0x65, 0x74, 0x20, 0x54, 0x64, 0x70,
+ 0x4C, 0x69, 0x6D, 0x69, 0x74, 0x44, 0x69, 0x73,
+ 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x01, 0x41, 0x31,
+ 0x32, 0x35, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x0A,
+ 0x04, 0x00, 0x60, 0x70, 0x73, 0x0D, 0x20, 0x20,
+ 0x44, 0x50, 0x4D, 0x20, 0x6D, 0x61, 0x73, 0x6B,
+ 0x20, 0x3D, 0x20, 0x00, 0x98, 0x60, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x41, 0x31, 0x32,
+ 0x38, 0x0A, 0x58, 0x60, 0x70, 0x0D, 0x20, 0x20,
+ 0x3D, 0x3D, 0x3D, 0x3D, 0x3D, 0x3D, 0x00, 0x5B,
+ 0x31, 0x14, 0x24, 0x41, 0x30, 0x30, 0x37, 0x01,
+ 0x70, 0x41, 0x31, 0x31, 0x37, 0x60, 0xA0, 0x0C,
+ 0x93, 0x68, 0x0A, 0x00, 0x70, 0x0A, 0x00, 0x41,
+ 0x31, 0x31, 0x37, 0xA1, 0x08, 0x70, 0x0A, 0x01,
+ 0x41, 0x31, 0x31, 0x37, 0xA4, 0x60, 0x5B, 0x80,
+ 0x50, 0x4D, 0x49, 0x4F, 0x01, 0x0B, 0xD6, 0x0C,
+ 0x0A, 0x02, 0x5B, 0x81, 0x10, 0x50, 0x4D, 0x49,
+ 0x4F, 0x01, 0x41, 0x30, 0x39, 0x39, 0x08, 0x41,
+ 0x31, 0x30, 0x30, 0x08, 0x5B, 0x86, 0x12, 0x41,
+ 0x30, 0x39, 0x39, 0x41, 0x31, 0x30, 0x30, 0x01,
+ 0x00, 0x40, 0x70, 0x41, 0x31, 0x30, 0x31, 0x20,
+ 0x5B, 0x80, 0x41, 0x43, 0x46, 0x47, 0x01, 0x41,
+ 0x31, 0x30, 0x31, 0x0A, 0x08, 0x5B, 0x81, 0x0B,
+ 0x41, 0x43, 0x46, 0x47, 0x03, 0x41, 0x31, 0x30,
+ 0x32, 0x20, 0x5B, 0x87, 0x16, 0x41, 0x43, 0x46,
+ 0x47, 0x41, 0x31, 0x30, 0x32, 0x0C, 0x68, 0x00,
+ 0x00, 0x80, 0x03, 0x00, 0x20, 0x41, 0x30, 0x37,
+ 0x30, 0x02, 0x08, 0x41, 0x42, 0x53, 0x4D, 0x0A,
+ 0x00, 0x14, 0x27, 0x41, 0x30, 0x36, 0x37, 0x01,
+ 0xA0, 0x15, 0x93, 0x68, 0x0A, 0x00, 0x70, 0x41,
+ 0x30, 0x37, 0x30, 0x41, 0x42, 0x53, 0x4D, 0x70,
+ 0x0A, 0x00, 0x41, 0x30, 0x37, 0x30, 0xA1, 0x0A,
+ 0x70, 0x41, 0x42, 0x53, 0x4D, 0x41, 0x30, 0x37,
+ 0x30, 0x5B, 0x82, 0x8C, 0x83, 0x04, 0x41, 0x57,
+ 0x52, 0x30, 0x08, 0x5F, 0x48, 0x49, 0x44, 0x0C,
+ 0x41, 0xD0, 0x0C, 0x02, 0x08, 0x5F, 0x55, 0x49,
+ 0x44, 0x0A, 0x90, 0x08, 0x57, 0x52, 0x42, 0x53,
+ 0x0B, 0x30, 0x01, 0x5B, 0x82, 0x4A, 0xE6, 0x41,
+ 0x42, 0x52, 0x30, 0x08, 0x5F, 0x48, 0x49, 0x44,
+ 0x0C, 0x41, 0xD0, 0x0C, 0x02, 0x08, 0x5F, 0x55,
+ 0x49, 0x44, 0x0A, 0x80, 0x08, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x20, 0x08, 0x41, 0x42, 0x30, 0x30,
+ 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x31, 0x0A,
+ 0x00, 0x08, 0x41, 0x42, 0x30, 0x45, 0x0A, 0x00,
+ 0x08, 0x41, 0x42, 0x30, 0x32, 0x0A, 0x00, 0x08,
+ 0x41, 0x42, 0x30, 0x33, 0x0A, 0x00, 0x08, 0x41,
+ 0x42, 0x30, 0x34, 0x0A, 0x00, 0x08, 0x41, 0x42,
+ 0x30, 0x35, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30,
+ 0x36, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x37,
+ 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x38, 0x0A,
+ 0x00, 0x08, 0x41, 0x42, 0x30, 0x39, 0x0A, 0x00,
+ 0x08, 0x41, 0x42, 0x30, 0x41, 0x0A, 0x00, 0x08,
+ 0x41, 0x42, 0x30, 0x42, 0x0A, 0x00, 0x08, 0x41,
+ 0x42, 0x30, 0x43, 0x0A, 0x00, 0x08, 0x41, 0x42,
+ 0x30, 0x44, 0x0A, 0x00, 0x5B, 0x80, 0x41, 0x30,
+ 0x38, 0x33, 0x00, 0x72, 0x41, 0x47, 0x52, 0x42,
+ 0x7D, 0x79, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x0D, 0x00, 0x00, 0x0A,
+ 0x0F, 0x00, 0x79, 0x83, 0x88, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72,
+ 0x41, 0x42, 0x31, 0x32, 0x0A, 0x0E, 0x00, 0x00,
+ 0x0A, 0x0C, 0x00, 0x00, 0x00, 0x0B, 0x00, 0x10,
+ 0x5B, 0x81, 0x45, 0x04, 0x41, 0x30, 0x38, 0x33,
+ 0x01, 0x00, 0x40, 0x0C, 0x00, 0x08, 0x41, 0x30,
+ 0x37, 0x34, 0x08, 0x41, 0x30, 0x37, 0x35, 0x08,
+ 0x00, 0x48, 0x26, 0x41, 0x30, 0x37, 0x30, 0x02,
+ 0x00, 0x03, 0x41, 0x30, 0x37, 0x31, 0x01, 0x00,
+ 0x0A, 0x00, 0x0B, 0x41, 0x30, 0x37, 0x32, 0x01,
+ 0x00, 0x44, 0x0E, 0x41, 0x30, 0x38, 0x32, 0x04,
+ 0x00, 0x01, 0x41, 0x30, 0x37, 0x39, 0x01, 0x00,
+ 0x4A, 0x2B, 0x41, 0x30, 0x38, 0x34, 0x20, 0x5B,
+ 0x87, 0x16, 0x41, 0x30, 0x38, 0x33, 0x41, 0x30,
+ 0x38, 0x34, 0x0A, 0xA1, 0x03, 0x00, 0x40, 0x72,
+ 0x00, 0x0C, 0x41, 0x30, 0x36, 0x36, 0x01, 0x5B,
+ 0x87, 0x16, 0x41, 0x30, 0x38, 0x33, 0x41, 0x30,
+ 0x38, 0x34, 0x0A, 0xA2, 0x03, 0x00, 0x40, 0x72,
+ 0x00, 0x0D, 0x41, 0x30, 0x38, 0x31, 0x01, 0x5B,
+ 0x87, 0x27, 0x41, 0x30, 0x38, 0x33, 0x41, 0x30,
+ 0x38, 0x34, 0x0A, 0xA4, 0x03, 0x00, 0x40, 0x72,
+ 0x41, 0x30, 0x37, 0x37, 0x01, 0x41, 0x30, 0x37,
+ 0x38, 0x01, 0x00, 0x0B, 0x41, 0x30, 0x37, 0x33,
+ 0x02, 0x00, 0x0E, 0x41, 0x30, 0x38, 0x30, 0x01,
+ 0x5B, 0x87, 0x14, 0x41, 0x30, 0x38, 0x33, 0x41,
+ 0x30, 0x38, 0x34, 0x0A, 0xA5, 0x03, 0x00, 0x40,
+ 0x72, 0x41, 0x30, 0x36, 0x35, 0x06, 0x5B, 0x80,
+ 0x41, 0x30, 0x38, 0x35, 0x00, 0x41, 0x47, 0x52,
+ 0x42, 0x0B, 0x00, 0x10, 0x5B, 0x81, 0x0E, 0x41,
+ 0x30, 0x38, 0x35, 0x01, 0x00, 0x40, 0x70, 0x41,
+ 0x30, 0x38, 0x36, 0x20, 0x5B, 0x87, 0x3C, 0x41,
+ 0x30, 0x38, 0x35, 0x41, 0x30, 0x38, 0x36, 0x7D,
+ 0x79, 0x5E, 0x57, 0x52, 0x42, 0x53, 0x0A, 0x10,
+ 0x00, 0x72, 0x0B, 0x00, 0x08, 0x77, 0x0B, 0x00,
+ 0x01, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42,
+ 0x31, 0x32, 0x0A, 0x0B, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x03, 0x00, 0x40, 0x72, 0x41, 0x30, 0x38,
+ 0x37, 0x01, 0x5B, 0x87, 0x20, 0x41, 0x30, 0x38,
+ 0x35, 0x41, 0x30, 0x38, 0x36, 0x7D, 0x79, 0x5E,
+ 0x57, 0x52, 0x42, 0x53, 0x0A, 0x10, 0x00, 0x0B,
+ 0x29, 0x80, 0x00, 0x03, 0x00, 0x40, 0x72, 0x41,
+ 0x30, 0x38, 0x38, 0x10, 0x08, 0x41, 0x42, 0x31,
+ 0x30, 0x0A, 0x00, 0x14, 0x4D, 0x18, 0x5F, 0x49,
+ 0x4E, 0x49, 0x00, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x00, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x30, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x01, 0x00, 0x00, 0x41, 0x42, 0x30, 0x45, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x02, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x31, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x03, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x32, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x04, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x33, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x05, 0x00, 0x00, 0x41, 0x42, 0x30, 0x34, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x06, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x35, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x07, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x36, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x08, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x37, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x09, 0x00, 0x00, 0x41, 0x42, 0x30, 0x38, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x0A, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x39, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x0B, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x41, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x0C, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x42, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x0D, 0x00, 0x00, 0x41, 0x42, 0x30, 0x43, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x0E, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x44, 0x14, 0x22, 0x41, 0x30, 0x36, 0x31, 0x00,
+ 0x70, 0x41, 0x30, 0x34, 0x31, 0x60, 0xA0, 0x0A,
+ 0x93, 0x60, 0x0A, 0x01, 0xA4, 0x41, 0x42, 0x30,
+ 0x31, 0xA0, 0x0A, 0x93, 0x60, 0x0A, 0x00, 0xA4,
+ 0x41, 0x42, 0x30, 0x45, 0x14, 0x1F, 0x41, 0x30,
+ 0x35, 0x35, 0x00, 0xA0, 0x15, 0x92, 0x93, 0x41,
+ 0x42, 0x31, 0x30, 0x0A, 0x00, 0xA0, 0x0B, 0x93,
+ 0x41, 0x42, 0x31, 0x30, 0x0A, 0x01, 0xA4, 0x0A,
+ 0x01, 0xA4, 0x0A, 0x00, 0x14, 0x2A, 0x41, 0x30,
+ 0x36, 0x32, 0x00, 0xA0, 0x0E, 0x92, 0x93, 0x41,
+ 0x42, 0x30, 0x35, 0x0A, 0x00, 0xA4, 0x41, 0x42,
+ 0x30, 0x35, 0xA0, 0x11, 0x94, 0x41, 0x42, 0x31,
+ 0x30, 0x0A, 0x01, 0xA4, 0x74, 0x41, 0x42, 0x31,
+ 0x30, 0x0A, 0x01, 0x00, 0xA4, 0x0A, 0x00, 0x14,
+ 0x49, 0x07, 0x41, 0x30, 0x35, 0x34, 0x00, 0xA0,
+ 0x22, 0x93, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x50, 0x30, 0x35, 0x0A, 0x00, 0xA0, 0x0E,
+ 0x92, 0x93, 0x41, 0x42, 0x30, 0x35, 0x0A, 0x00,
+ 0xA4, 0x41, 0x42, 0x30, 0x35, 0xA4, 0x41, 0x42,
+ 0x30, 0x45, 0x70, 0x41, 0x30, 0x36, 0x32, 0x60,
+ 0xA0, 0x17, 0x92, 0x93, 0x60, 0x0A, 0x00, 0xA0,
+ 0x0C, 0x94, 0x60, 0x41, 0x42, 0x30, 0x30, 0xA4,
+ 0x41, 0x42, 0x30, 0x30, 0xA1, 0x03, 0xA4, 0x60,
+ 0x70, 0x41, 0x30, 0x36, 0x31, 0x60, 0xA0, 0x28,
+ 0x92, 0x93, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x50, 0x30, 0x33, 0x0A, 0x00, 0xA0, 0x18,
+ 0x95, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x50, 0x30, 0x33, 0x60, 0xA4, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x50, 0x30, 0x33, 0xA4,
+ 0x60, 0x14, 0x0B, 0x41, 0x30, 0x35, 0x33, 0x00,
+ 0xA4, 0x41, 0x42, 0x30, 0x32, 0x14, 0x0B, 0x41,
+ 0x30, 0x35, 0x36, 0x00, 0xA4, 0x41, 0x42, 0x30,
+ 0x30, 0x14, 0x4B, 0x13, 0x41, 0x30, 0x35, 0x32,
+ 0x01, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x52, 0x65, 0x71, 0x75, 0x65, 0x73, 0x74,
+ 0x50, 0x6F, 0x72, 0x74, 0x53, 0x70, 0x65, 0x65,
+ 0x64, 0x20, 0x45, 0x6E, 0x74, 0x65, 0x72, 0x20,
+ 0x53, 0x70, 0x65, 0x65, 0x64, 0x3A, 0x20, 0x00,
+ 0x98, 0x68, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x68, 0x41, 0x42, 0x30, 0x32, 0xA0,
+ 0x14, 0x93, 0x41, 0x42, 0x30, 0x33, 0x0A, 0x01,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30,
+ 0x36, 0x33, 0x0A, 0x01, 0x41, 0x30, 0x36, 0x34,
+ 0x68, 0xA0, 0x40, 0x0B, 0x92, 0x95, 0x41, 0x30,
+ 0x36, 0x35, 0x0A, 0x10, 0xA0, 0x10, 0x92, 0x93,
+ 0x41, 0x42, 0x31, 0x30, 0x0A, 0x00, 0x70, 0x0A,
+ 0x00, 0x41, 0x30, 0x36, 0x36, 0xA1, 0x08, 0x70,
+ 0x0A, 0x01, 0x41, 0x30, 0x36, 0x36, 0xA0, 0x14,
+ 0x93, 0x41, 0x42, 0x30, 0x33, 0x0A, 0x01, 0x5C,
+ 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30, 0x36,
+ 0x37, 0x0A, 0x00, 0xA1, 0x07, 0x41, 0x30, 0x36,
+ 0x38, 0x0A, 0x00, 0x08, 0x41, 0x30, 0x36, 0x39,
+ 0x0A, 0x00, 0x70, 0x41, 0x30, 0x37, 0x30, 0x41,
+ 0x30, 0x36, 0x39, 0x70, 0x0A, 0x00, 0x41, 0x30,
+ 0x37, 0x30, 0x70, 0x0A, 0x01, 0x60, 0xA2, 0x2D,
+ 0x60, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x37, 0x31,
+ 0x5B, 0x22, 0x0A, 0x1E, 0xA2, 0x0C, 0x93, 0x41,
+ 0x30, 0x37, 0x32, 0x0A, 0x01, 0x5B, 0x22, 0x0A,
+ 0x0A, 0xA0, 0x0F, 0x93, 0x68, 0x0A, 0x01, 0xA0,
+ 0x09, 0x93, 0x41, 0x30, 0x37, 0x33, 0x0A, 0x00,
+ 0xA5, 0xA1, 0x02, 0xA5, 0x70, 0x41, 0x30, 0x36,
+ 0x39, 0x41, 0x30, 0x37, 0x30, 0xA0, 0x14, 0x93,
+ 0x41, 0x42, 0x30, 0x33, 0x0A, 0x01, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30, 0x36, 0x37,
+ 0x0A, 0x01, 0xA1, 0x07, 0x41, 0x30, 0x36, 0x38,
+ 0x0A, 0x01, 0xA0, 0x14, 0x93, 0x41, 0x42, 0x30,
+ 0x33, 0x0A, 0x01, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x30, 0x36, 0x33, 0x0A, 0x00, 0x70,
+ 0x0D, 0x50, 0x63, 0x69, 0x65, 0x52, 0x65, 0x71,
+ 0x75, 0x65, 0x73, 0x74, 0x50, 0x6F, 0x72, 0x74,
+ 0x53, 0x70, 0x65, 0x65, 0x64, 0x20, 0x45, 0x78,
+ 0x69, 0x74, 0x00, 0x5B, 0x31, 0x14, 0x28, 0x41,
+ 0x30, 0x35, 0x37, 0x01, 0x70, 0x73, 0x0D, 0x20,
+ 0x53, 0x65, 0x74, 0x20, 0x52, 0x65, 0x71, 0x75,
+ 0x65, 0x73, 0x74, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x68, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31,
+ 0x70, 0x68, 0x41, 0x42, 0x31, 0x30, 0x14, 0x22,
+ 0x41, 0x30, 0x35, 0x38, 0x01, 0x7A, 0x68, 0x0A,
+ 0x08, 0x60, 0xA0, 0x13, 0x90, 0x92, 0x95, 0x60,
+ 0x41, 0x30, 0x37, 0x34, 0x92, 0x94, 0x60, 0x41,
+ 0x30, 0x37, 0x35, 0xA4, 0x0A, 0x01, 0xA4, 0x0A,
+ 0x00, 0x14, 0x1F, 0x41, 0x30, 0x37, 0x36, 0x01,
+ 0x7D, 0x41, 0x42, 0x30, 0x44, 0x79, 0x41, 0x42,
+ 0x30, 0x43, 0x0A, 0x03, 0x00, 0x60, 0xA0, 0x07,
+ 0x93, 0x68, 0x60, 0xA4, 0x0A, 0x01, 0xA4, 0x0A,
+ 0x00, 0x14, 0x0D, 0x41, 0x30, 0x35, 0x39, 0x00,
+ 0x70, 0x0A, 0x00, 0x41, 0x42, 0x31, 0x30, 0x14,
+ 0x42, 0x07, 0x41, 0x30, 0x36, 0x34, 0x01, 0xA0,
+ 0x0D, 0x92, 0x95, 0x68, 0x0A, 0x02, 0x70, 0x0A,
+ 0x01, 0x41, 0x30, 0x37, 0x37, 0xA0, 0x0D, 0x92,
+ 0x95, 0x68, 0x0A, 0x03, 0x70, 0x0A, 0x01, 0x41,
+ 0x30, 0x37, 0x38, 0xA0, 0x31, 0x93, 0x68, 0x0A,
+ 0x01, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x37, 0x39,
+ 0x70, 0x0A, 0x00, 0x41, 0x30, 0x37, 0x37, 0x70,
+ 0x0A, 0x00, 0x41, 0x30, 0x37, 0x38, 0x70, 0x0A,
+ 0x00, 0x41, 0x30, 0x38, 0x30, 0xA0, 0x0F, 0x93,
+ 0x41, 0x42, 0x30, 0x34, 0x0A, 0x01, 0x70, 0x0A,
+ 0x01, 0x41, 0x30, 0x38, 0x31, 0xA1, 0x16, 0x70,
+ 0x0A, 0x00, 0x41, 0x30, 0x37, 0x39, 0x70, 0x0A,
+ 0x01, 0x41, 0x30, 0x38, 0x30, 0x70, 0x0A, 0x00,
+ 0x41, 0x30, 0x38, 0x31, 0x70, 0x68, 0x41, 0x30,
+ 0x38, 0x32, 0x14, 0x41, 0x32, 0x41, 0x30, 0x36,
+ 0x30, 0x00, 0x70, 0x0D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x00, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x44, 0x65, 0x76, 0x69, 0x63,
+ 0x65, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x43, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x46, 0x75, 0x6E,
+ 0x63, 0x74, 0x69, 0x6F, 0x6E, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x44, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72, 0x74, 0x41,
+ 0x63, 0x53, 0x70, 0x65, 0x65, 0x64, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x45, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72,
+ 0x74, 0x4D, 0x61, 0x78, 0x53, 0x70, 0x65, 0x65,
+ 0x64, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x30,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69, 0x65, 0x50,
+ 0x6F, 0x72, 0x74, 0x41, 0x63, 0x53, 0x70, 0x65,
+ 0x65, 0x64, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x45, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x50, 0x6F, 0x72, 0x74, 0x44, 0x63, 0x53,
+ 0x70, 0x65, 0x65, 0x64, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x31, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72, 0x74, 0x43,
+ 0x75, 0x72, 0x53, 0x70, 0x65, 0x65, 0x64, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x32, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x63, 0x69, 0x65, 0x53, 0x62, 0x50,
+ 0x6F, 0x72, 0x74, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x33,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69, 0x65, 0x4C,
+ 0x69, 0x6E, 0x6B, 0x53, 0x61, 0x66, 0x65, 0x4D,
+ 0x6F, 0x64, 0x65, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x34, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x4C, 0x6F, 0x63, 0x61, 0x6C, 0x4F, 0x76,
+ 0x65, 0x72, 0x72, 0x69, 0x64, 0x65, 0x53, 0x70,
+ 0x65, 0x65, 0x64, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x35, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x53,
+ 0x74, 0x61, 0x72, 0x74, 0x50, 0x68, 0x79, 0x4C,
+ 0x61, 0x6E, 0x65, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x36, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x45, 0x6E, 0x64, 0x50, 0x68, 0x79, 0x4C,
+ 0x61, 0x6E, 0x65, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x37,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x53, 0x74, 0x61, 0x72, 0x74,
+ 0x43, 0x6F, 0x72, 0x65, 0x4C, 0x61, 0x6E, 0x65,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x38, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x45, 0x6E, 0x64,
+ 0x43, 0x6F, 0x72, 0x65, 0x4C, 0x61, 0x6E, 0x65,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x39, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x6F, 0x72, 0x74, 0x49, 0x64, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x41, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x4C, 0x69, 0x6E, 0x6B, 0x48, 0x6F, 0x74,
+ 0x70, 0x6C, 0x75, 0x67, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x42,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x0D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x00, 0x5B, 0x31, 0x14, 0x42, 0x05, 0x41,
+ 0x30, 0x39, 0x34, 0x02, 0xA0, 0x11, 0x93, 0x41,
+ 0x30, 0x39, 0x33, 0x68, 0x0A, 0x00, 0x0C, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xA4, 0x0A, 0x00, 0x70, 0x41,
+ 0x30, 0x39, 0x33, 0x68, 0x0A, 0x34, 0x60, 0xA2,
+ 0x2F, 0x0A, 0x01, 0x70, 0x41, 0x30, 0x39, 0x33,
+ 0x68, 0x7B, 0x60, 0x0A, 0xFF, 0x00, 0x61, 0xA0,
+ 0x0E, 0x93, 0x7B, 0x61, 0x0A, 0xFF, 0x00, 0x69,
+ 0xA4, 0x7B, 0x60, 0x0A, 0xFF, 0x00, 0x7B, 0x7A,
+ 0x61, 0x0A, 0x08, 0x00, 0x0A, 0xFF, 0x60, 0xA0,
+ 0x07, 0x93, 0x60, 0x0A, 0x00, 0xA4, 0x60, 0x08,
+ 0x41, 0x45, 0x53, 0x50, 0x12, 0x12, 0x08, 0x0A,
+ 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A,
+ 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x14,
+ 0x49, 0x0D, 0x41, 0x30, 0x36, 0x38, 0x01, 0x70,
+ 0x0D, 0x50, 0x63, 0x69, 0x65, 0x45, 0x70, 0x41,
+ 0x73, 0x70, 0x6D, 0x20, 0x45, 0x6E, 0x74, 0x65,
+ 0x72, 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x00, 0x60,
+ 0xA0, 0x49, 0x08, 0x92, 0x93, 0x41, 0x30, 0x39,
+ 0x33, 0x60, 0x0A, 0x00, 0x0C, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0x7B, 0x41, 0x30, 0x39, 0x33, 0x60, 0x0A,
+ 0x08, 0x0A, 0x80, 0x61, 0xA0, 0x09, 0x93, 0x61,
+ 0x0A, 0x80, 0x70, 0x0A, 0x07, 0x67, 0xA1, 0x05,
+ 0x70, 0x0A, 0x00, 0x67, 0xA2, 0x4D, 0x05, 0x92,
+ 0x94, 0x60, 0x67, 0x70, 0x41, 0x30, 0x39, 0x34,
+ 0x60, 0x0A, 0x10, 0x61, 0xA0, 0x08, 0x93, 0x61,
+ 0x0A, 0x00, 0x75, 0x60, 0x9F, 0xA0, 0x2B, 0x93,
+ 0x68, 0x0A, 0x00, 0x70, 0x41, 0x30, 0x39, 0x33,
+ 0x60, 0x72, 0x61, 0x0A, 0x10, 0x00, 0x62, 0x41,
+ 0x30, 0x39, 0x35, 0x60, 0x72, 0x61, 0x0A, 0x10,
+ 0x00, 0x7B, 0x62, 0x80, 0x0A, 0x03, 0x00, 0x00,
+ 0x70, 0x62, 0x88, 0x41, 0x45, 0x53, 0x50, 0x60,
+ 0x00, 0xA1, 0x16, 0x70, 0x83, 0x88, 0x41, 0x45,
+ 0x53, 0x50, 0x60, 0x00, 0x62, 0x41, 0x30, 0x39,
+ 0x35, 0x60, 0x72, 0x61, 0x0A, 0x10, 0x00, 0x62,
+ 0x75, 0x60, 0xA1, 0x1A, 0x70, 0x0D, 0x45, 0x6E,
+ 0x64, 0x70, 0x6F, 0x69, 0x6E, 0x74, 0x20, 0x6E,
+ 0x6F, 0x74, 0x20, 0x70, 0x72, 0x65, 0x73, 0x65,
+ 0x6E, 0x74, 0x00, 0x5B, 0x31, 0x70, 0x0D, 0x50,
+ 0x63, 0x69, 0x65, 0x45, 0x70, 0x41, 0x73, 0x70,
+ 0x6D, 0x20, 0x45, 0x78, 0x69, 0x74, 0x00, 0x5B,
+ 0x31, 0x14, 0x3D, 0x41, 0x30, 0x39, 0x35, 0x0B,
+ 0x72, 0x41, 0x47, 0x52, 0x42, 0x79, 0x41, 0x30,
+ 0x37, 0x34, 0x0A, 0x14, 0x00, 0x60, 0x72, 0x60,
+ 0x79, 0x68, 0x0A, 0x0C, 0x00, 0x60, 0x72, 0x60,
+ 0x69, 0x60, 0x5B, 0x80, 0x41, 0x44, 0x52, 0x42,
+ 0x00, 0x60, 0x0A, 0x04, 0x5B, 0x81, 0x0B, 0x41,
+ 0x44, 0x52, 0x42, 0x03, 0x41, 0x44, 0x52, 0x52,
+ 0x20, 0x70, 0x6A, 0x41, 0x44, 0x52, 0x52, 0x14,
+ 0x3C, 0x41, 0x30, 0x39, 0x33, 0x0A, 0x72, 0x41,
+ 0x47, 0x52, 0x42, 0x79, 0x41, 0x30, 0x37, 0x34,
+ 0x0A, 0x14, 0x00, 0x60, 0x72, 0x60, 0x79, 0x68,
+ 0x0A, 0x0C, 0x00, 0x60, 0x72, 0x60, 0x69, 0x60,
+ 0x5B, 0x80, 0x41, 0x44, 0x52, 0x42, 0x00, 0x60,
+ 0x0A, 0x04, 0x5B, 0x81, 0x0B, 0x41, 0x44, 0x52,
+ 0x42, 0x03, 0x41, 0x44, 0x52, 0x52, 0x20, 0xA4,
+ 0x41, 0x44, 0x52, 0x52, 0x14, 0x19, 0x41, 0x30,
+ 0x38, 0x39, 0x01, 0xA0, 0x0C, 0x92, 0x93, 0x41,
+ 0x42, 0x30, 0x42, 0x0A, 0x01, 0xA4, 0x0A, 0x00,
+ 0xA4, 0x41, 0x30, 0x37, 0x36, 0x68, 0x14, 0x49,
+ 0x25, 0x41, 0x30, 0x39, 0x30, 0x01, 0x08, 0x41,
+ 0x30, 0x36, 0x39, 0x0A, 0x00, 0x70, 0x41, 0x30,
+ 0x37, 0x30, 0x41, 0x30, 0x36, 0x39, 0x70, 0x0A,
+ 0x00, 0x41, 0x30, 0x37, 0x30, 0xA0, 0x09, 0x93,
+ 0x68, 0x0A, 0x01, 0x70, 0x0A, 0x01, 0x60, 0xA1,
+ 0x05, 0x70, 0x0A, 0x05, 0x60, 0xA2, 0x46, 0x1E,
+ 0x92, 0x93, 0x60, 0x0A, 0x08, 0xA0, 0x41, 0x04,
+ 0x93, 0x60, 0x0A, 0x01, 0xA0, 0x15, 0x94, 0x41,
+ 0x42, 0x30, 0x45, 0x0A, 0x01, 0x70, 0x41, 0x42,
+ 0x30, 0x45, 0x41, 0x42, 0x30, 0x35, 0x41, 0x30,
+ 0x33, 0x38, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x30, 0x39, 0x31, 0x0A, 0x01, 0x41, 0x42,
+ 0x30, 0x36, 0x41, 0x42, 0x30, 0x37, 0x41, 0x30,
+ 0x39, 0x32, 0x0A, 0x01, 0x70, 0x0A, 0x00, 0x41,
+ 0x30, 0x38, 0x37, 0x70, 0x0A, 0x03, 0x60, 0xA0,
+ 0x4D, 0x04, 0x93, 0x60, 0x0A, 0x03, 0x70, 0x0A,
+ 0x00, 0x61, 0x70, 0x0A, 0x00, 0x62, 0xA2, 0x2E,
+ 0x95, 0x61, 0x0A, 0x3C, 0xA0, 0x22, 0x94, 0x41,
+ 0x30, 0x36, 0x35, 0x0A, 0x04, 0x70, 0x0D, 0x20,
+ 0x44, 0x65, 0x76, 0x69, 0x63, 0x65, 0x20, 0x64,
+ 0x65, 0x74, 0x65, 0x63, 0x74, 0x65, 0x64, 0x00,
+ 0x5B, 0x31, 0x70, 0x0A, 0x01, 0x62, 0xA5, 0x5B,
+ 0x22, 0x0A, 0x01, 0x75, 0x61, 0xA0, 0x09, 0x93,
+ 0x62, 0x0A, 0x01, 0x70, 0x0A, 0x04, 0x60, 0xA1,
+ 0x05, 0x70, 0x0A, 0x05, 0x60, 0xA0, 0x45, 0x06,
+ 0x93, 0x60, 0x0A, 0x04, 0x70, 0x0A, 0x00, 0x61,
+ 0x70, 0x0A, 0x00, 0x62, 0xA2, 0x37, 0x95, 0x61,
+ 0x0A, 0x50, 0xA0, 0x2B, 0x90, 0x92, 0x95, 0x41,
+ 0x30, 0x36, 0x35, 0x0A, 0x10, 0x92, 0x94, 0x41,
+ 0x30, 0x36, 0x35, 0x0A, 0x13, 0x70, 0x0D, 0x20,
+ 0x44, 0x65, 0x76, 0x69, 0x63, 0x65, 0x20, 0x50,
+ 0x72, 0x65, 0x73, 0x65, 0x6E, 0x74, 0x00, 0x5B,
+ 0x31, 0x70, 0x0A, 0x01, 0x62, 0xA5, 0x5B, 0x22,
+ 0x0A, 0x01, 0x75, 0x61, 0xA0, 0x09, 0x93, 0x62,
+ 0x0A, 0x01, 0x70, 0x0A, 0x07, 0x60, 0xA1, 0x14,
+ 0xA0, 0x0C, 0x93, 0x41, 0x42, 0x30, 0x34, 0x0A,
+ 0x01, 0x70, 0x0A, 0x05, 0x60, 0xA1, 0x05, 0x70,
+ 0x0A, 0x06, 0x60, 0xA0, 0x45, 0x07, 0x93, 0x60,
+ 0x0A, 0x06, 0x70, 0x0A, 0x01, 0x41, 0x42, 0x30,
+ 0x34, 0x70, 0x0A, 0x01, 0x41, 0x42, 0x30, 0x35,
+ 0x41, 0x30, 0x36, 0x34, 0x0A, 0x01, 0xA0, 0x46,
+ 0x05, 0x5B, 0x12, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x4C, 0x49, 0x43, 0x66, 0x70, 0x0D,
+ 0x20, 0x43, 0x61, 0x6C, 0x6C, 0x20, 0x41, 0x4C,
+ 0x49, 0x43, 0x20, 0x6D, 0x65, 0x74, 0x68, 0x6F,
+ 0x64, 0x00, 0x5B, 0x31, 0x7D, 0x79, 0x41, 0x42,
+ 0x30, 0x43, 0x0A, 0x03, 0x00, 0x41, 0x42, 0x30,
+ 0x44, 0x61, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x4C, 0x49, 0x43, 0x61, 0x0A, 0x00, 0x5B,
+ 0x22, 0x0A, 0x02, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x4C, 0x49, 0x43, 0x61, 0x0A, 0x01,
+ 0x70, 0x0A, 0x03, 0x60, 0x9F, 0x70, 0x0A, 0x05,
+ 0x60, 0xA0, 0x44, 0x06, 0x93, 0x60, 0x0A, 0x05,
+ 0x70, 0x0D, 0x20, 0x44, 0x65, 0x76, 0x69, 0x63,
+ 0x65, 0x20, 0x6E, 0x6F, 0x74, 0x20, 0x50, 0x72,
+ 0x65, 0x73, 0x65, 0x6E, 0x74, 0x00, 0x5B, 0x31,
+ 0x41, 0x30, 0x39, 0x33, 0x0A, 0x00, 0x0A, 0x00,
+ 0x70, 0x0A, 0x01, 0x41, 0x30, 0x38, 0x37, 0x41,
+ 0x30, 0x39, 0x32, 0x0A, 0x00, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x30, 0x39, 0x31, 0x0A,
+ 0x00, 0x41, 0x42, 0x30, 0x36, 0x41, 0x42, 0x30,
+ 0x37, 0x70, 0x0A, 0x00, 0x41, 0x42, 0x30, 0x35,
+ 0x70, 0x0A, 0x00, 0x41, 0x42, 0x30, 0x34, 0x70,
+ 0x0A, 0x00, 0x41, 0x42, 0x31, 0x30, 0x70, 0x0A,
+ 0x00, 0x62, 0x70, 0x0A, 0x08, 0x60, 0xA0, 0x0D,
+ 0x93, 0x60, 0x0A, 0x07, 0x70, 0x0A, 0x01, 0x62,
+ 0x70, 0x0A, 0x08, 0x60, 0xA0, 0x0F, 0x93, 0x41,
+ 0x42, 0x30, 0x34, 0x0A, 0x00, 0x70, 0x0A, 0x00,
+ 0x41, 0x42, 0x30, 0x35, 0xA0, 0x28, 0x91, 0x94,
+ 0x41, 0x42, 0x30, 0x45, 0x0A, 0x01, 0x93, 0x41,
+ 0x50, 0x30, 0x35, 0x0A, 0x01, 0xA0, 0x17, 0x94,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x0A, 0x00, 0x00, 0x0A,
+ 0x01, 0x41, 0x30, 0x33, 0x38, 0x70, 0x41, 0x30,
+ 0x36, 0x39, 0x41, 0x30, 0x37, 0x30, 0xA4, 0x62,
+ 0x14, 0x46, 0x05, 0x41, 0x30, 0x39, 0x32, 0x01,
+ 0xA0, 0x14, 0x94, 0x41, 0x42, 0x30, 0x36, 0x41,
+ 0x42, 0x30, 0x37, 0x74, 0x41, 0x42, 0x30, 0x36,
+ 0x41, 0x42, 0x30, 0x37, 0x60, 0xA1, 0x0B, 0x74,
+ 0x41, 0x42, 0x30, 0x37, 0x41, 0x42, 0x30, 0x36,
+ 0x60, 0x75, 0x60, 0x79, 0x0A, 0x01, 0x60, 0x60,
+ 0x76, 0x60, 0x79, 0x60, 0x41, 0x42, 0x30, 0x38,
+ 0x60, 0xA0, 0x0F, 0x93, 0x68, 0x0A, 0x01, 0x7D,
+ 0x41, 0x30, 0x38, 0x38, 0x60, 0x41, 0x30, 0x38,
+ 0x38, 0xA1, 0x0D, 0x7B, 0x41, 0x30, 0x38, 0x38,
+ 0x80, 0x60, 0x00, 0x41, 0x30, 0x38, 0x38, 0x5B,
+ 0x82, 0x4A, 0xE6, 0x41, 0x42, 0x52, 0x31, 0x08,
+ 0x5F, 0x48, 0x49, 0x44, 0x0C, 0x41, 0xD0, 0x0C,
+ 0x02, 0x08, 0x5F, 0x55, 0x49, 0x44, 0x0A, 0x81,
+ 0x08, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x34, 0x08,
+ 0x41, 0x42, 0x30, 0x30, 0x0A, 0x00, 0x08, 0x41,
+ 0x42, 0x30, 0x31, 0x0A, 0x00, 0x08, 0x41, 0x42,
+ 0x30, 0x45, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30,
+ 0x32, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x33,
+ 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x34, 0x0A,
+ 0x00, 0x08, 0x41, 0x42, 0x30, 0x35, 0x0A, 0x00,
+ 0x08, 0x41, 0x42, 0x30, 0x36, 0x0A, 0x00, 0x08,
+ 0x41, 0x42, 0x30, 0x37, 0x0A, 0x00, 0x08, 0x41,
+ 0x42, 0x30, 0x38, 0x0A, 0x00, 0x08, 0x41, 0x42,
+ 0x30, 0x39, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30,
+ 0x41, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x42,
+ 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x43, 0x0A,
+ 0x00, 0x08, 0x41, 0x42, 0x30, 0x44, 0x0A, 0x00,
+ 0x5B, 0x80, 0x41, 0x30, 0x38, 0x33, 0x00, 0x72,
+ 0x41, 0x47, 0x52, 0x42, 0x7D, 0x79, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x0D, 0x00, 0x00, 0x0A, 0x0F, 0x00, 0x79, 0x83,
+ 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32,
+ 0x0A, 0x0E, 0x00, 0x00, 0x0A, 0x0C, 0x00, 0x00,
+ 0x00, 0x0B, 0x00, 0x10, 0x5B, 0x81, 0x45, 0x04,
+ 0x41, 0x30, 0x38, 0x33, 0x01, 0x00, 0x40, 0x0C,
+ 0x00, 0x08, 0x41, 0x30, 0x37, 0x34, 0x08, 0x41,
+ 0x30, 0x37, 0x35, 0x08, 0x00, 0x48, 0x26, 0x41,
+ 0x30, 0x37, 0x30, 0x02, 0x00, 0x03, 0x41, 0x30,
+ 0x37, 0x31, 0x01, 0x00, 0x0A, 0x00, 0x0B, 0x41,
+ 0x30, 0x37, 0x32, 0x01, 0x00, 0x44, 0x0E, 0x41,
+ 0x30, 0x38, 0x32, 0x04, 0x00, 0x01, 0x41, 0x30,
+ 0x37, 0x39, 0x01, 0x00, 0x4A, 0x2B, 0x41, 0x30,
+ 0x38, 0x34, 0x20, 0x5B, 0x87, 0x16, 0x41, 0x30,
+ 0x38, 0x33, 0x41, 0x30, 0x38, 0x34, 0x0A, 0xA1,
+ 0x03, 0x00, 0x40, 0x72, 0x00, 0x0C, 0x41, 0x30,
+ 0x36, 0x36, 0x01, 0x5B, 0x87, 0x16, 0x41, 0x30,
+ 0x38, 0x33, 0x41, 0x30, 0x38, 0x34, 0x0A, 0xA2,
+ 0x03, 0x00, 0x40, 0x72, 0x00, 0x0D, 0x41, 0x30,
+ 0x38, 0x31, 0x01, 0x5B, 0x87, 0x27, 0x41, 0x30,
+ 0x38, 0x33, 0x41, 0x30, 0x38, 0x34, 0x0A, 0xA4,
+ 0x03, 0x00, 0x40, 0x72, 0x41, 0x30, 0x37, 0x37,
+ 0x01, 0x41, 0x30, 0x37, 0x38, 0x01, 0x00, 0x0B,
+ 0x41, 0x30, 0x37, 0x33, 0x02, 0x00, 0x0E, 0x41,
+ 0x30, 0x38, 0x30, 0x01, 0x5B, 0x87, 0x14, 0x41,
+ 0x30, 0x38, 0x33, 0x41, 0x30, 0x38, 0x34, 0x0A,
+ 0xA5, 0x03, 0x00, 0x40, 0x72, 0x41, 0x30, 0x36,
+ 0x35, 0x06, 0x5B, 0x80, 0x41, 0x30, 0x38, 0x35,
+ 0x00, 0x41, 0x47, 0x52, 0x42, 0x0B, 0x00, 0x10,
+ 0x5B, 0x81, 0x0E, 0x41, 0x30, 0x38, 0x35, 0x01,
+ 0x00, 0x40, 0x70, 0x41, 0x30, 0x38, 0x36, 0x20,
+ 0x5B, 0x87, 0x3C, 0x41, 0x30, 0x38, 0x35, 0x41,
+ 0x30, 0x38, 0x36, 0x7D, 0x79, 0x5E, 0x57, 0x52,
+ 0x42, 0x53, 0x0A, 0x10, 0x00, 0x72, 0x0B, 0x00,
+ 0x08, 0x77, 0x0B, 0x00, 0x01, 0x83, 0x88, 0x5C,
+ 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41,
+ 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x0B,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x40,
+ 0x72, 0x41, 0x30, 0x38, 0x37, 0x01, 0x5B, 0x87,
+ 0x20, 0x41, 0x30, 0x38, 0x35, 0x41, 0x30, 0x38,
+ 0x36, 0x7D, 0x79, 0x5E, 0x57, 0x52, 0x42, 0x53,
+ 0x0A, 0x10, 0x00, 0x0B, 0x29, 0x80, 0x00, 0x03,
+ 0x00, 0x40, 0x72, 0x41, 0x30, 0x38, 0x38, 0x10,
+ 0x08, 0x41, 0x42, 0x31, 0x30, 0x0A, 0x00, 0x14,
+ 0x4D, 0x18, 0x5F, 0x49, 0x4E, 0x49, 0x00, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x00, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x30, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x01, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x45, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x02, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x31, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x03, 0x00, 0x00, 0x41, 0x42, 0x30, 0x32, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x04, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x33, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x05, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x34, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x06, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x35, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x07, 0x00, 0x00, 0x41, 0x42, 0x30, 0x36, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x08, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x37, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x09, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x38, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x0A, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x39, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x0B, 0x00, 0x00, 0x41, 0x42, 0x30, 0x41, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x0C, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x42, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x0D, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x43, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x0E, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x44, 0x14, 0x22, 0x41,
+ 0x30, 0x36, 0x31, 0x00, 0x70, 0x41, 0x30, 0x34,
+ 0x31, 0x60, 0xA0, 0x0A, 0x93, 0x60, 0x0A, 0x01,
+ 0xA4, 0x41, 0x42, 0x30, 0x31, 0xA0, 0x0A, 0x93,
+ 0x60, 0x0A, 0x00, 0xA4, 0x41, 0x42, 0x30, 0x45,
+ 0x14, 0x1F, 0x41, 0x30, 0x35, 0x35, 0x00, 0xA0,
+ 0x15, 0x92, 0x93, 0x41, 0x42, 0x31, 0x30, 0x0A,
+ 0x00, 0xA0, 0x0B, 0x93, 0x41, 0x42, 0x31, 0x30,
+ 0x0A, 0x01, 0xA4, 0x0A, 0x01, 0xA4, 0x0A, 0x00,
+ 0x14, 0x2A, 0x41, 0x30, 0x36, 0x32, 0x00, 0xA0,
+ 0x0E, 0x92, 0x93, 0x41, 0x42, 0x30, 0x35, 0x0A,
+ 0x00, 0xA4, 0x41, 0x42, 0x30, 0x35, 0xA0, 0x11,
+ 0x94, 0x41, 0x42, 0x31, 0x30, 0x0A, 0x01, 0xA4,
+ 0x74, 0x41, 0x42, 0x31, 0x30, 0x0A, 0x01, 0x00,
+ 0xA4, 0x0A, 0x00, 0x14, 0x49, 0x07, 0x41, 0x30,
+ 0x35, 0x34, 0x00, 0xA0, 0x22, 0x93, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x50, 0x30, 0x35,
+ 0x0A, 0x00, 0xA0, 0x0E, 0x92, 0x93, 0x41, 0x42,
+ 0x30, 0x35, 0x0A, 0x00, 0xA4, 0x41, 0x42, 0x30,
+ 0x35, 0xA4, 0x41, 0x42, 0x30, 0x45, 0x70, 0x41,
+ 0x30, 0x36, 0x32, 0x60, 0xA0, 0x17, 0x92, 0x93,
+ 0x60, 0x0A, 0x00, 0xA0, 0x0C, 0x94, 0x60, 0x41,
+ 0x42, 0x30, 0x30, 0xA4, 0x41, 0x42, 0x30, 0x30,
+ 0xA1, 0x03, 0xA4, 0x60, 0x70, 0x41, 0x30, 0x36,
+ 0x31, 0x60, 0xA0, 0x28, 0x92, 0x93, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x50, 0x30, 0x33,
+ 0x0A, 0x00, 0xA0, 0x18, 0x95, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x50, 0x30, 0x33, 0x60,
+ 0xA4, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x50, 0x30, 0x33, 0xA4, 0x60, 0x14, 0x0B, 0x41,
+ 0x30, 0x35, 0x33, 0x00, 0xA4, 0x41, 0x42, 0x30,
+ 0x32, 0x14, 0x0B, 0x41, 0x30, 0x35, 0x36, 0x00,
+ 0xA4, 0x41, 0x42, 0x30, 0x30, 0x14, 0x4B, 0x13,
+ 0x41, 0x30, 0x35, 0x32, 0x01, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x63, 0x69, 0x65, 0x52, 0x65, 0x71,
+ 0x75, 0x65, 0x73, 0x74, 0x50, 0x6F, 0x72, 0x74,
+ 0x53, 0x70, 0x65, 0x65, 0x64, 0x20, 0x45, 0x6E,
+ 0x74, 0x65, 0x72, 0x20, 0x53, 0x70, 0x65, 0x65,
+ 0x64, 0x3A, 0x20, 0x00, 0x98, 0x68, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x68, 0x41,
+ 0x42, 0x30, 0x32, 0xA0, 0x14, 0x93, 0x41, 0x42,
+ 0x30, 0x33, 0x0A, 0x01, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x30, 0x36, 0x33, 0x0A, 0x01,
+ 0x41, 0x30, 0x36, 0x34, 0x68, 0xA0, 0x40, 0x0B,
+ 0x92, 0x95, 0x41, 0x30, 0x36, 0x35, 0x0A, 0x10,
+ 0xA0, 0x10, 0x92, 0x93, 0x41, 0x42, 0x31, 0x30,
+ 0x0A, 0x00, 0x70, 0x0A, 0x00, 0x41, 0x30, 0x36,
+ 0x36, 0xA1, 0x08, 0x70, 0x0A, 0x01, 0x41, 0x30,
+ 0x36, 0x36, 0xA0, 0x14, 0x93, 0x41, 0x42, 0x30,
+ 0x33, 0x0A, 0x01, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x30, 0x36, 0x37, 0x0A, 0x00, 0xA1,
+ 0x07, 0x41, 0x30, 0x36, 0x38, 0x0A, 0x00, 0x08,
+ 0x41, 0x30, 0x36, 0x39, 0x0A, 0x00, 0x70, 0x41,
+ 0x30, 0x37, 0x30, 0x41, 0x30, 0x36, 0x39, 0x70,
+ 0x0A, 0x00, 0x41, 0x30, 0x37, 0x30, 0x70, 0x0A,
+ 0x01, 0x60, 0xA2, 0x2D, 0x60, 0x70, 0x0A, 0x01,
+ 0x41, 0x30, 0x37, 0x31, 0x5B, 0x22, 0x0A, 0x1E,
+ 0xA2, 0x0C, 0x93, 0x41, 0x30, 0x37, 0x32, 0x0A,
+ 0x01, 0x5B, 0x22, 0x0A, 0x0A, 0xA0, 0x0F, 0x93,
+ 0x68, 0x0A, 0x01, 0xA0, 0x09, 0x93, 0x41, 0x30,
+ 0x37, 0x33, 0x0A, 0x00, 0xA5, 0xA1, 0x02, 0xA5,
+ 0x70, 0x41, 0x30, 0x36, 0x39, 0x41, 0x30, 0x37,
+ 0x30, 0xA0, 0x14, 0x93, 0x41, 0x42, 0x30, 0x33,
+ 0x0A, 0x01, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x30, 0x36, 0x37, 0x0A, 0x01, 0xA1, 0x07,
+ 0x41, 0x30, 0x36, 0x38, 0x0A, 0x01, 0xA0, 0x14,
+ 0x93, 0x41, 0x42, 0x30, 0x33, 0x0A, 0x01, 0x5C,
+ 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30, 0x36,
+ 0x33, 0x0A, 0x00, 0x70, 0x0D, 0x50, 0x63, 0x69,
+ 0x65, 0x52, 0x65, 0x71, 0x75, 0x65, 0x73, 0x74,
+ 0x50, 0x6F, 0x72, 0x74, 0x53, 0x70, 0x65, 0x65,
+ 0x64, 0x20, 0x45, 0x78, 0x69, 0x74, 0x00, 0x5B,
+ 0x31, 0x14, 0x28, 0x41, 0x30, 0x35, 0x37, 0x01,
+ 0x70, 0x73, 0x0D, 0x20, 0x53, 0x65, 0x74, 0x20,
+ 0x52, 0x65, 0x71, 0x75, 0x65, 0x73, 0x74, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x68, 0x00, 0x41, 0x44,
+ 0x42, 0x47, 0x5B, 0x31, 0x70, 0x68, 0x41, 0x42,
+ 0x31, 0x30, 0x14, 0x22, 0x41, 0x30, 0x35, 0x38,
+ 0x01, 0x7A, 0x68, 0x0A, 0x08, 0x60, 0xA0, 0x13,
+ 0x90, 0x92, 0x95, 0x60, 0x41, 0x30, 0x37, 0x34,
+ 0x92, 0x94, 0x60, 0x41, 0x30, 0x37, 0x35, 0xA4,
+ 0x0A, 0x01, 0xA4, 0x0A, 0x00, 0x14, 0x1F, 0x41,
+ 0x30, 0x37, 0x36, 0x01, 0x7D, 0x41, 0x42, 0x30,
+ 0x44, 0x79, 0x41, 0x42, 0x30, 0x43, 0x0A, 0x03,
+ 0x00, 0x60, 0xA0, 0x07, 0x93, 0x68, 0x60, 0xA4,
+ 0x0A, 0x01, 0xA4, 0x0A, 0x00, 0x14, 0x0D, 0x41,
+ 0x30, 0x35, 0x39, 0x00, 0x70, 0x0A, 0x00, 0x41,
+ 0x42, 0x31, 0x30, 0x14, 0x42, 0x07, 0x41, 0x30,
+ 0x36, 0x34, 0x01, 0xA0, 0x0D, 0x92, 0x95, 0x68,
+ 0x0A, 0x02, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x37,
+ 0x37, 0xA0, 0x0D, 0x92, 0x95, 0x68, 0x0A, 0x03,
+ 0x70, 0x0A, 0x01, 0x41, 0x30, 0x37, 0x38, 0xA0,
+ 0x31, 0x93, 0x68, 0x0A, 0x01, 0x70, 0x0A, 0x01,
+ 0x41, 0x30, 0x37, 0x39, 0x70, 0x0A, 0x00, 0x41,
+ 0x30, 0x37, 0x37, 0x70, 0x0A, 0x00, 0x41, 0x30,
+ 0x37, 0x38, 0x70, 0x0A, 0x00, 0x41, 0x30, 0x38,
+ 0x30, 0xA0, 0x0F, 0x93, 0x41, 0x42, 0x30, 0x34,
+ 0x0A, 0x01, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x38,
+ 0x31, 0xA1, 0x16, 0x70, 0x0A, 0x00, 0x41, 0x30,
+ 0x37, 0x39, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x38,
+ 0x30, 0x70, 0x0A, 0x00, 0x41, 0x30, 0x38, 0x31,
+ 0x70, 0x68, 0x41, 0x30, 0x38, 0x32, 0x14, 0x41,
+ 0x32, 0x41, 0x30, 0x36, 0x30, 0x00, 0x70, 0x0D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x00, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x44,
+ 0x65, 0x76, 0x69, 0x63, 0x65, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x43, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x46, 0x75, 0x6E, 0x63, 0x74, 0x69, 0x6F,
+ 0x6E, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x44,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69, 0x65, 0x50,
+ 0x6F, 0x72, 0x74, 0x41, 0x63, 0x53, 0x70, 0x65,
+ 0x65, 0x64, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x45, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x50, 0x6F, 0x72, 0x74, 0x4D, 0x61, 0x78,
+ 0x53, 0x70, 0x65, 0x65, 0x64, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x30, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72, 0x74, 0x41,
+ 0x63, 0x53, 0x70, 0x65, 0x65, 0x64, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x45, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72,
+ 0x74, 0x44, 0x63, 0x53, 0x70, 0x65, 0x65, 0x64,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x31,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69, 0x65, 0x50,
+ 0x6F, 0x72, 0x74, 0x43, 0x75, 0x72, 0x53, 0x70,
+ 0x65, 0x65, 0x64, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x32, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x53, 0x62, 0x50, 0x6F, 0x72, 0x74, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x33, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x63, 0x69, 0x65, 0x4C, 0x69, 0x6E, 0x6B, 0x53,
+ 0x61, 0x66, 0x65, 0x4D, 0x6F, 0x64, 0x65, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x34, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x63, 0x69, 0x65, 0x4C, 0x6F, 0x63,
+ 0x61, 0x6C, 0x4F, 0x76, 0x65, 0x72, 0x72, 0x69,
+ 0x64, 0x65, 0x53, 0x70, 0x65, 0x65, 0x64, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x35,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x53, 0x74, 0x61, 0x72, 0x74,
+ 0x50, 0x68, 0x79, 0x4C, 0x61, 0x6E, 0x65, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x36, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x45, 0x6E, 0x64,
+ 0x50, 0x68, 0x79, 0x4C, 0x61, 0x6E, 0x65, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x37, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x53,
+ 0x74, 0x61, 0x72, 0x74, 0x43, 0x6F, 0x72, 0x65,
+ 0x4C, 0x61, 0x6E, 0x65, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x38, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x45, 0x6E, 0x64, 0x43, 0x6F, 0x72, 0x65,
+ 0x4C, 0x61, 0x6E, 0x65, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x39,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x6F, 0x72, 0x74, 0x49,
+ 0x64, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x41, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x4C, 0x69, 0x6E,
+ 0x6B, 0x48, 0x6F, 0x74, 0x70, 0x6C, 0x75, 0x67,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x42, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x0D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x00, 0x5B, 0x31,
+ 0x14, 0x42, 0x05, 0x41, 0x30, 0x39, 0x34, 0x02,
+ 0xA0, 0x11, 0x93, 0x41, 0x30, 0x39, 0x33, 0x68,
+ 0x0A, 0x00, 0x0C, 0xFF, 0xFF, 0xFF, 0xFF, 0xA4,
+ 0x0A, 0x00, 0x70, 0x41, 0x30, 0x39, 0x33, 0x68,
+ 0x0A, 0x34, 0x60, 0xA2, 0x2F, 0x0A, 0x01, 0x70,
+ 0x41, 0x30, 0x39, 0x33, 0x68, 0x7B, 0x60, 0x0A,
+ 0xFF, 0x00, 0x61, 0xA0, 0x0E, 0x93, 0x7B, 0x61,
+ 0x0A, 0xFF, 0x00, 0x69, 0xA4, 0x7B, 0x60, 0x0A,
+ 0xFF, 0x00, 0x7B, 0x7A, 0x61, 0x0A, 0x08, 0x00,
+ 0x0A, 0xFF, 0x60, 0xA0, 0x07, 0x93, 0x60, 0x0A,
+ 0x00, 0xA4, 0x60, 0x08, 0x41, 0x45, 0x53, 0x50,
+ 0x12, 0x12, 0x08, 0x0A, 0x00, 0x0A, 0x00, 0x0A,
+ 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A,
+ 0x00, 0x0A, 0x00, 0x14, 0x49, 0x0D, 0x41, 0x30,
+ 0x36, 0x38, 0x01, 0x70, 0x0D, 0x50, 0x63, 0x69,
+ 0x65, 0x45, 0x70, 0x41, 0x73, 0x70, 0x6D, 0x20,
+ 0x45, 0x6E, 0x74, 0x65, 0x72, 0x00, 0x5B, 0x31,
+ 0x70, 0x0A, 0x00, 0x60, 0xA0, 0x49, 0x08, 0x92,
+ 0x93, 0x41, 0x30, 0x39, 0x33, 0x60, 0x0A, 0x00,
+ 0x0C, 0xFF, 0xFF, 0xFF, 0xFF, 0x7B, 0x41, 0x30,
+ 0x39, 0x33, 0x60, 0x0A, 0x08, 0x0A, 0x80, 0x61,
+ 0xA0, 0x09, 0x93, 0x61, 0x0A, 0x80, 0x70, 0x0A,
+ 0x07, 0x67, 0xA1, 0x05, 0x70, 0x0A, 0x00, 0x67,
+ 0xA2, 0x4D, 0x05, 0x92, 0x94, 0x60, 0x67, 0x70,
+ 0x41, 0x30, 0x39, 0x34, 0x60, 0x0A, 0x10, 0x61,
+ 0xA0, 0x08, 0x93, 0x61, 0x0A, 0x00, 0x75, 0x60,
+ 0x9F, 0xA0, 0x2B, 0x93, 0x68, 0x0A, 0x00, 0x70,
+ 0x41, 0x30, 0x39, 0x33, 0x60, 0x72, 0x61, 0x0A,
+ 0x10, 0x00, 0x62, 0x41, 0x30, 0x39, 0x35, 0x60,
+ 0x72, 0x61, 0x0A, 0x10, 0x00, 0x7B, 0x62, 0x80,
+ 0x0A, 0x03, 0x00, 0x00, 0x70, 0x62, 0x88, 0x41,
+ 0x45, 0x53, 0x50, 0x60, 0x00, 0xA1, 0x16, 0x70,
+ 0x83, 0x88, 0x41, 0x45, 0x53, 0x50, 0x60, 0x00,
+ 0x62, 0x41, 0x30, 0x39, 0x35, 0x60, 0x72, 0x61,
+ 0x0A, 0x10, 0x00, 0x62, 0x75, 0x60, 0xA1, 0x1A,
+ 0x70, 0x0D, 0x45, 0x6E, 0x64, 0x70, 0x6F, 0x69,
+ 0x6E, 0x74, 0x20, 0x6E, 0x6F, 0x74, 0x20, 0x70,
+ 0x72, 0x65, 0x73, 0x65, 0x6E, 0x74, 0x00, 0x5B,
+ 0x31, 0x70, 0x0D, 0x50, 0x63, 0x69, 0x65, 0x45,
+ 0x70, 0x41, 0x73, 0x70, 0x6D, 0x20, 0x45, 0x78,
+ 0x69, 0x74, 0x00, 0x5B, 0x31, 0x14, 0x3D, 0x41,
+ 0x30, 0x39, 0x35, 0x0B, 0x72, 0x41, 0x47, 0x52,
+ 0x42, 0x79, 0x41, 0x30, 0x37, 0x34, 0x0A, 0x14,
+ 0x00, 0x60, 0x72, 0x60, 0x79, 0x68, 0x0A, 0x0C,
+ 0x00, 0x60, 0x72, 0x60, 0x69, 0x60, 0x5B, 0x80,
+ 0x41, 0x44, 0x52, 0x42, 0x00, 0x60, 0x0A, 0x04,
+ 0x5B, 0x81, 0x0B, 0x41, 0x44, 0x52, 0x42, 0x03,
+ 0x41, 0x44, 0x52, 0x52, 0x20, 0x70, 0x6A, 0x41,
+ 0x44, 0x52, 0x52, 0x14, 0x3C, 0x41, 0x30, 0x39,
+ 0x33, 0x0A, 0x72, 0x41, 0x47, 0x52, 0x42, 0x79,
+ 0x41, 0x30, 0x37, 0x34, 0x0A, 0x14, 0x00, 0x60,
+ 0x72, 0x60, 0x79, 0x68, 0x0A, 0x0C, 0x00, 0x60,
+ 0x72, 0x60, 0x69, 0x60, 0x5B, 0x80, 0x41, 0x44,
+ 0x52, 0x42, 0x00, 0x60, 0x0A, 0x04, 0x5B, 0x81,
+ 0x0B, 0x41, 0x44, 0x52, 0x42, 0x03, 0x41, 0x44,
+ 0x52, 0x52, 0x20, 0xA4, 0x41, 0x44, 0x52, 0x52,
+ 0x14, 0x19, 0x41, 0x30, 0x38, 0x39, 0x01, 0xA0,
+ 0x0C, 0x92, 0x93, 0x41, 0x42, 0x30, 0x42, 0x0A,
+ 0x01, 0xA4, 0x0A, 0x00, 0xA4, 0x41, 0x30, 0x37,
+ 0x36, 0x68, 0x14, 0x49, 0x25, 0x41, 0x30, 0x39,
+ 0x30, 0x01, 0x08, 0x41, 0x30, 0x36, 0x39, 0x0A,
+ 0x00, 0x70, 0x41, 0x30, 0x37, 0x30, 0x41, 0x30,
+ 0x36, 0x39, 0x70, 0x0A, 0x00, 0x41, 0x30, 0x37,
+ 0x30, 0xA0, 0x09, 0x93, 0x68, 0x0A, 0x01, 0x70,
+ 0x0A, 0x01, 0x60, 0xA1, 0x05, 0x70, 0x0A, 0x05,
+ 0x60, 0xA2, 0x46, 0x1E, 0x92, 0x93, 0x60, 0x0A,
+ 0x08, 0xA0, 0x41, 0x04, 0x93, 0x60, 0x0A, 0x01,
+ 0xA0, 0x15, 0x94, 0x41, 0x42, 0x30, 0x45, 0x0A,
+ 0x01, 0x70, 0x41, 0x42, 0x30, 0x45, 0x41, 0x42,
+ 0x30, 0x35, 0x41, 0x30, 0x33, 0x38, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30, 0x39, 0x31,
+ 0x0A, 0x01, 0x41, 0x42, 0x30, 0x36, 0x41, 0x42,
+ 0x30, 0x37, 0x41, 0x30, 0x39, 0x32, 0x0A, 0x01,
+ 0x70, 0x0A, 0x00, 0x41, 0x30, 0x38, 0x37, 0x70,
+ 0x0A, 0x03, 0x60, 0xA0, 0x4D, 0x04, 0x93, 0x60,
+ 0x0A, 0x03, 0x70, 0x0A, 0x00, 0x61, 0x70, 0x0A,
+ 0x00, 0x62, 0xA2, 0x2E, 0x95, 0x61, 0x0A, 0x3C,
+ 0xA0, 0x22, 0x94, 0x41, 0x30, 0x36, 0x35, 0x0A,
+ 0x04, 0x70, 0x0D, 0x20, 0x44, 0x65, 0x76, 0x69,
+ 0x63, 0x65, 0x20, 0x64, 0x65, 0x74, 0x65, 0x63,
+ 0x74, 0x65, 0x64, 0x00, 0x5B, 0x31, 0x70, 0x0A,
+ 0x01, 0x62, 0xA5, 0x5B, 0x22, 0x0A, 0x01, 0x75,
+ 0x61, 0xA0, 0x09, 0x93, 0x62, 0x0A, 0x01, 0x70,
+ 0x0A, 0x04, 0x60, 0xA1, 0x05, 0x70, 0x0A, 0x05,
+ 0x60, 0xA0, 0x45, 0x06, 0x93, 0x60, 0x0A, 0x04,
+ 0x70, 0x0A, 0x00, 0x61, 0x70, 0x0A, 0x00, 0x62,
+ 0xA2, 0x37, 0x95, 0x61, 0x0A, 0x50, 0xA0, 0x2B,
+ 0x90, 0x92, 0x95, 0x41, 0x30, 0x36, 0x35, 0x0A,
+ 0x10, 0x92, 0x94, 0x41, 0x30, 0x36, 0x35, 0x0A,
+ 0x13, 0x70, 0x0D, 0x20, 0x44, 0x65, 0x76, 0x69,
+ 0x63, 0x65, 0x20, 0x50, 0x72, 0x65, 0x73, 0x65,
+ 0x6E, 0x74, 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x01,
+ 0x62, 0xA5, 0x5B, 0x22, 0x0A, 0x01, 0x75, 0x61,
+ 0xA0, 0x09, 0x93, 0x62, 0x0A, 0x01, 0x70, 0x0A,
+ 0x07, 0x60, 0xA1, 0x14, 0xA0, 0x0C, 0x93, 0x41,
+ 0x42, 0x30, 0x34, 0x0A, 0x01, 0x70, 0x0A, 0x05,
+ 0x60, 0xA1, 0x05, 0x70, 0x0A, 0x06, 0x60, 0xA0,
+ 0x45, 0x07, 0x93, 0x60, 0x0A, 0x06, 0x70, 0x0A,
+ 0x01, 0x41, 0x42, 0x30, 0x34, 0x70, 0x0A, 0x01,
+ 0x41, 0x42, 0x30, 0x35, 0x41, 0x30, 0x36, 0x34,
+ 0x0A, 0x01, 0xA0, 0x46, 0x05, 0x5B, 0x12, 0x5C,
+ 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x4C, 0x49,
+ 0x43, 0x66, 0x70, 0x0D, 0x20, 0x43, 0x61, 0x6C,
+ 0x6C, 0x20, 0x41, 0x4C, 0x49, 0x43, 0x20, 0x6D,
+ 0x65, 0x74, 0x68, 0x6F, 0x64, 0x00, 0x5B, 0x31,
+ 0x7D, 0x79, 0x41, 0x42, 0x30, 0x43, 0x0A, 0x03,
+ 0x00, 0x41, 0x42, 0x30, 0x44, 0x61, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x4C, 0x49, 0x43,
+ 0x61, 0x0A, 0x00, 0x5B, 0x22, 0x0A, 0x02, 0x5C,
+ 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x4C, 0x49,
+ 0x43, 0x61, 0x0A, 0x01, 0x70, 0x0A, 0x03, 0x60,
+ 0x9F, 0x70, 0x0A, 0x05, 0x60, 0xA0, 0x44, 0x06,
+ 0x93, 0x60, 0x0A, 0x05, 0x70, 0x0D, 0x20, 0x44,
+ 0x65, 0x76, 0x69, 0x63, 0x65, 0x20, 0x6E, 0x6F,
+ 0x74, 0x20, 0x50, 0x72, 0x65, 0x73, 0x65, 0x6E,
+ 0x74, 0x00, 0x5B, 0x31, 0x41, 0x30, 0x39, 0x33,
+ 0x0A, 0x00, 0x0A, 0x00, 0x70, 0x0A, 0x01, 0x41,
+ 0x30, 0x38, 0x37, 0x41, 0x30, 0x39, 0x32, 0x0A,
+ 0x00, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x30, 0x39, 0x31, 0x0A, 0x00, 0x41, 0x42, 0x30,
+ 0x36, 0x41, 0x42, 0x30, 0x37, 0x70, 0x0A, 0x00,
+ 0x41, 0x42, 0x30, 0x35, 0x70, 0x0A, 0x00, 0x41,
+ 0x42, 0x30, 0x34, 0x70, 0x0A, 0x00, 0x41, 0x42,
+ 0x31, 0x30, 0x70, 0x0A, 0x00, 0x62, 0x70, 0x0A,
+ 0x08, 0x60, 0xA0, 0x0D, 0x93, 0x60, 0x0A, 0x07,
+ 0x70, 0x0A, 0x01, 0x62, 0x70, 0x0A, 0x08, 0x60,
+ 0xA0, 0x0F, 0x93, 0x41, 0x42, 0x30, 0x34, 0x0A,
+ 0x00, 0x70, 0x0A, 0x00, 0x41, 0x42, 0x30, 0x35,
+ 0xA0, 0x28, 0x91, 0x94, 0x41, 0x42, 0x30, 0x45,
+ 0x0A, 0x01, 0x93, 0x41, 0x50, 0x30, 0x35, 0x0A,
+ 0x01, 0xA0, 0x17, 0x94, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x0A, 0x00, 0x00, 0x0A, 0x01, 0x41, 0x30, 0x33,
+ 0x38, 0x70, 0x41, 0x30, 0x36, 0x39, 0x41, 0x30,
+ 0x37, 0x30, 0xA4, 0x62, 0x14, 0x46, 0x05, 0x41,
+ 0x30, 0x39, 0x32, 0x01, 0xA0, 0x14, 0x94, 0x41,
+ 0x42, 0x30, 0x36, 0x41, 0x42, 0x30, 0x37, 0x74,
+ 0x41, 0x42, 0x30, 0x36, 0x41, 0x42, 0x30, 0x37,
+ 0x60, 0xA1, 0x0B, 0x74, 0x41, 0x42, 0x30, 0x37,
+ 0x41, 0x42, 0x30, 0x36, 0x60, 0x75, 0x60, 0x79,
+ 0x0A, 0x01, 0x60, 0x60, 0x76, 0x60, 0x79, 0x60,
+ 0x41, 0x42, 0x30, 0x38, 0x60, 0xA0, 0x0F, 0x93,
+ 0x68, 0x0A, 0x01, 0x7D, 0x41, 0x30, 0x38, 0x38,
+ 0x60, 0x41, 0x30, 0x38, 0x38, 0xA1, 0x0D, 0x7B,
+ 0x41, 0x30, 0x38, 0x38, 0x80, 0x60, 0x00, 0x41,
+ 0x30, 0x38, 0x38, 0x5B, 0x82, 0x4A, 0xE6, 0x41,
+ 0x42, 0x52, 0x32, 0x08, 0x5F, 0x48, 0x49, 0x44,
+ 0x0C, 0x41, 0xD0, 0x0C, 0x02, 0x08, 0x5F, 0x55,
+ 0x49, 0x44, 0x0A, 0x82, 0x08, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x48, 0x08, 0x41, 0x42, 0x30, 0x30,
+ 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x31, 0x0A,
+ 0x00, 0x08, 0x41, 0x42, 0x30, 0x45, 0x0A, 0x00,
+ 0x08, 0x41, 0x42, 0x30, 0x32, 0x0A, 0x00, 0x08,
+ 0x41, 0x42, 0x30, 0x33, 0x0A, 0x00, 0x08, 0x41,
+ 0x42, 0x30, 0x34, 0x0A, 0x00, 0x08, 0x41, 0x42,
+ 0x30, 0x35, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30,
+ 0x36, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x37,
+ 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x38, 0x0A,
+ 0x00, 0x08, 0x41, 0x42, 0x30, 0x39, 0x0A, 0x00,
+ 0x08, 0x41, 0x42, 0x30, 0x41, 0x0A, 0x00, 0x08,
+ 0x41, 0x42, 0x30, 0x42, 0x0A, 0x00, 0x08, 0x41,
+ 0x42, 0x30, 0x43, 0x0A, 0x00, 0x08, 0x41, 0x42,
+ 0x30, 0x44, 0x0A, 0x00, 0x5B, 0x80, 0x41, 0x30,
+ 0x38, 0x33, 0x00, 0x72, 0x41, 0x47, 0x52, 0x42,
+ 0x7D, 0x79, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x0D, 0x00, 0x00, 0x0A,
+ 0x0F, 0x00, 0x79, 0x83, 0x88, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72,
+ 0x41, 0x42, 0x31, 0x32, 0x0A, 0x0E, 0x00, 0x00,
+ 0x0A, 0x0C, 0x00, 0x00, 0x00, 0x0B, 0x00, 0x10,
+ 0x5B, 0x81, 0x45, 0x04, 0x41, 0x30, 0x38, 0x33,
+ 0x01, 0x00, 0x40, 0x0C, 0x00, 0x08, 0x41, 0x30,
+ 0x37, 0x34, 0x08, 0x41, 0x30, 0x37, 0x35, 0x08,
+ 0x00, 0x48, 0x26, 0x41, 0x30, 0x37, 0x30, 0x02,
+ 0x00, 0x03, 0x41, 0x30, 0x37, 0x31, 0x01, 0x00,
+ 0x0A, 0x00, 0x0B, 0x41, 0x30, 0x37, 0x32, 0x01,
+ 0x00, 0x44, 0x0E, 0x41, 0x30, 0x38, 0x32, 0x04,
+ 0x00, 0x01, 0x41, 0x30, 0x37, 0x39, 0x01, 0x00,
+ 0x4A, 0x2B, 0x41, 0x30, 0x38, 0x34, 0x20, 0x5B,
+ 0x87, 0x16, 0x41, 0x30, 0x38, 0x33, 0x41, 0x30,
+ 0x38, 0x34, 0x0A, 0xA1, 0x03, 0x00, 0x40, 0x72,
+ 0x00, 0x0C, 0x41, 0x30, 0x36, 0x36, 0x01, 0x5B,
+ 0x87, 0x16, 0x41, 0x30, 0x38, 0x33, 0x41, 0x30,
+ 0x38, 0x34, 0x0A, 0xA2, 0x03, 0x00, 0x40, 0x72,
+ 0x00, 0x0D, 0x41, 0x30, 0x38, 0x31, 0x01, 0x5B,
+ 0x87, 0x27, 0x41, 0x30, 0x38, 0x33, 0x41, 0x30,
+ 0x38, 0x34, 0x0A, 0xA4, 0x03, 0x00, 0x40, 0x72,
+ 0x41, 0x30, 0x37, 0x37, 0x01, 0x41, 0x30, 0x37,
+ 0x38, 0x01, 0x00, 0x0B, 0x41, 0x30, 0x37, 0x33,
+ 0x02, 0x00, 0x0E, 0x41, 0x30, 0x38, 0x30, 0x01,
+ 0x5B, 0x87, 0x14, 0x41, 0x30, 0x38, 0x33, 0x41,
+ 0x30, 0x38, 0x34, 0x0A, 0xA5, 0x03, 0x00, 0x40,
+ 0x72, 0x41, 0x30, 0x36, 0x35, 0x06, 0x5B, 0x80,
+ 0x41, 0x30, 0x38, 0x35, 0x00, 0x41, 0x47, 0x52,
+ 0x42, 0x0B, 0x00, 0x10, 0x5B, 0x81, 0x0E, 0x41,
+ 0x30, 0x38, 0x35, 0x01, 0x00, 0x40, 0x70, 0x41,
+ 0x30, 0x38, 0x36, 0x20, 0x5B, 0x87, 0x3C, 0x41,
+ 0x30, 0x38, 0x35, 0x41, 0x30, 0x38, 0x36, 0x7D,
+ 0x79, 0x5E, 0x57, 0x52, 0x42, 0x53, 0x0A, 0x10,
+ 0x00, 0x72, 0x0B, 0x00, 0x08, 0x77, 0x0B, 0x00,
+ 0x01, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42,
+ 0x31, 0x32, 0x0A, 0x0B, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x03, 0x00, 0x40, 0x72, 0x41, 0x30, 0x38,
+ 0x37, 0x01, 0x5B, 0x87, 0x20, 0x41, 0x30, 0x38,
+ 0x35, 0x41, 0x30, 0x38, 0x36, 0x7D, 0x79, 0x5E,
+ 0x57, 0x52, 0x42, 0x53, 0x0A, 0x10, 0x00, 0x0B,
+ 0x29, 0x80, 0x00, 0x03, 0x00, 0x40, 0x72, 0x41,
+ 0x30, 0x38, 0x38, 0x10, 0x08, 0x41, 0x42, 0x31,
+ 0x30, 0x0A, 0x00, 0x14, 0x4D, 0x18, 0x5F, 0x49,
+ 0x4E, 0x49, 0x00, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x00, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x30, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x01, 0x00, 0x00, 0x41, 0x42, 0x30, 0x45, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x02, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x31, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x03, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x32, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x04, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x33, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x05, 0x00, 0x00, 0x41, 0x42, 0x30, 0x34, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x06, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x35, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x07, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x36, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x08, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x37, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x09, 0x00, 0x00, 0x41, 0x42, 0x30, 0x38, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x0A, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x39, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x0B, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x41, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x0C, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x42, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x0D, 0x00, 0x00, 0x41, 0x42, 0x30, 0x43, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x0E, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x44, 0x14, 0x22, 0x41, 0x30, 0x36, 0x31, 0x00,
+ 0x70, 0x41, 0x30, 0x34, 0x31, 0x60, 0xA0, 0x0A,
+ 0x93, 0x60, 0x0A, 0x01, 0xA4, 0x41, 0x42, 0x30,
+ 0x31, 0xA0, 0x0A, 0x93, 0x60, 0x0A, 0x00, 0xA4,
+ 0x41, 0x42, 0x30, 0x45, 0x14, 0x1F, 0x41, 0x30,
+ 0x35, 0x35, 0x00, 0xA0, 0x15, 0x92, 0x93, 0x41,
+ 0x42, 0x31, 0x30, 0x0A, 0x00, 0xA0, 0x0B, 0x93,
+ 0x41, 0x42, 0x31, 0x30, 0x0A, 0x01, 0xA4, 0x0A,
+ 0x01, 0xA4, 0x0A, 0x00, 0x14, 0x2A, 0x41, 0x30,
+ 0x36, 0x32, 0x00, 0xA0, 0x0E, 0x92, 0x93, 0x41,
+ 0x42, 0x30, 0x35, 0x0A, 0x00, 0xA4, 0x41, 0x42,
+ 0x30, 0x35, 0xA0, 0x11, 0x94, 0x41, 0x42, 0x31,
+ 0x30, 0x0A, 0x01, 0xA4, 0x74, 0x41, 0x42, 0x31,
+ 0x30, 0x0A, 0x01, 0x00, 0xA4, 0x0A, 0x00, 0x14,
+ 0x49, 0x07, 0x41, 0x30, 0x35, 0x34, 0x00, 0xA0,
+ 0x22, 0x93, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x50, 0x30, 0x35, 0x0A, 0x00, 0xA0, 0x0E,
+ 0x92, 0x93, 0x41, 0x42, 0x30, 0x35, 0x0A, 0x00,
+ 0xA4, 0x41, 0x42, 0x30, 0x35, 0xA4, 0x41, 0x42,
+ 0x30, 0x45, 0x70, 0x41, 0x30, 0x36, 0x32, 0x60,
+ 0xA0, 0x17, 0x92, 0x93, 0x60, 0x0A, 0x00, 0xA0,
+ 0x0C, 0x94, 0x60, 0x41, 0x42, 0x30, 0x30, 0xA4,
+ 0x41, 0x42, 0x30, 0x30, 0xA1, 0x03, 0xA4, 0x60,
+ 0x70, 0x41, 0x30, 0x36, 0x31, 0x60, 0xA0, 0x28,
+ 0x92, 0x93, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x50, 0x30, 0x33, 0x0A, 0x00, 0xA0, 0x18,
+ 0x95, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x50, 0x30, 0x33, 0x60, 0xA4, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x50, 0x30, 0x33, 0xA4,
+ 0x60, 0x14, 0x0B, 0x41, 0x30, 0x35, 0x33, 0x00,
+ 0xA4, 0x41, 0x42, 0x30, 0x32, 0x14, 0x0B, 0x41,
+ 0x30, 0x35, 0x36, 0x00, 0xA4, 0x41, 0x42, 0x30,
+ 0x30, 0x14, 0x4B, 0x13, 0x41, 0x30, 0x35, 0x32,
+ 0x01, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x52, 0x65, 0x71, 0x75, 0x65, 0x73, 0x74,
+ 0x50, 0x6F, 0x72, 0x74, 0x53, 0x70, 0x65, 0x65,
+ 0x64, 0x20, 0x45, 0x6E, 0x74, 0x65, 0x72, 0x20,
+ 0x53, 0x70, 0x65, 0x65, 0x64, 0x3A, 0x20, 0x00,
+ 0x98, 0x68, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x68, 0x41, 0x42, 0x30, 0x32, 0xA0,
+ 0x14, 0x93, 0x41, 0x42, 0x30, 0x33, 0x0A, 0x01,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30,
+ 0x36, 0x33, 0x0A, 0x01, 0x41, 0x30, 0x36, 0x34,
+ 0x68, 0xA0, 0x40, 0x0B, 0x92, 0x95, 0x41, 0x30,
+ 0x36, 0x35, 0x0A, 0x10, 0xA0, 0x10, 0x92, 0x93,
+ 0x41, 0x42, 0x31, 0x30, 0x0A, 0x00, 0x70, 0x0A,
+ 0x00, 0x41, 0x30, 0x36, 0x36, 0xA1, 0x08, 0x70,
+ 0x0A, 0x01, 0x41, 0x30, 0x36, 0x36, 0xA0, 0x14,
+ 0x93, 0x41, 0x42, 0x30, 0x33, 0x0A, 0x01, 0x5C,
+ 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30, 0x36,
+ 0x37, 0x0A, 0x00, 0xA1, 0x07, 0x41, 0x30, 0x36,
+ 0x38, 0x0A, 0x00, 0x08, 0x41, 0x30, 0x36, 0x39,
+ 0x0A, 0x00, 0x70, 0x41, 0x30, 0x37, 0x30, 0x41,
+ 0x30, 0x36, 0x39, 0x70, 0x0A, 0x00, 0x41, 0x30,
+ 0x37, 0x30, 0x70, 0x0A, 0x01, 0x60, 0xA2, 0x2D,
+ 0x60, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x37, 0x31,
+ 0x5B, 0x22, 0x0A, 0x1E, 0xA2, 0x0C, 0x93, 0x41,
+ 0x30, 0x37, 0x32, 0x0A, 0x01, 0x5B, 0x22, 0x0A,
+ 0x0A, 0xA0, 0x0F, 0x93, 0x68, 0x0A, 0x01, 0xA0,
+ 0x09, 0x93, 0x41, 0x30, 0x37, 0x33, 0x0A, 0x00,
+ 0xA5, 0xA1, 0x02, 0xA5, 0x70, 0x41, 0x30, 0x36,
+ 0x39, 0x41, 0x30, 0x37, 0x30, 0xA0, 0x14, 0x93,
+ 0x41, 0x42, 0x30, 0x33, 0x0A, 0x01, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30, 0x36, 0x37,
+ 0x0A, 0x01, 0xA1, 0x07, 0x41, 0x30, 0x36, 0x38,
+ 0x0A, 0x01, 0xA0, 0x14, 0x93, 0x41, 0x42, 0x30,
+ 0x33, 0x0A, 0x01, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x30, 0x36, 0x33, 0x0A, 0x00, 0x70,
+ 0x0D, 0x50, 0x63, 0x69, 0x65, 0x52, 0x65, 0x71,
+ 0x75, 0x65, 0x73, 0x74, 0x50, 0x6F, 0x72, 0x74,
+ 0x53, 0x70, 0x65, 0x65, 0x64, 0x20, 0x45, 0x78,
+ 0x69, 0x74, 0x00, 0x5B, 0x31, 0x14, 0x28, 0x41,
+ 0x30, 0x35, 0x37, 0x01, 0x70, 0x73, 0x0D, 0x20,
+ 0x53, 0x65, 0x74, 0x20, 0x52, 0x65, 0x71, 0x75,
+ 0x65, 0x73, 0x74, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x68, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31,
+ 0x70, 0x68, 0x41, 0x42, 0x31, 0x30, 0x14, 0x22,
+ 0x41, 0x30, 0x35, 0x38, 0x01, 0x7A, 0x68, 0x0A,
+ 0x08, 0x60, 0xA0, 0x13, 0x90, 0x92, 0x95, 0x60,
+ 0x41, 0x30, 0x37, 0x34, 0x92, 0x94, 0x60, 0x41,
+ 0x30, 0x37, 0x35, 0xA4, 0x0A, 0x01, 0xA4, 0x0A,
+ 0x00, 0x14, 0x1F, 0x41, 0x30, 0x37, 0x36, 0x01,
+ 0x7D, 0x41, 0x42, 0x30, 0x44, 0x79, 0x41, 0x42,
+ 0x30, 0x43, 0x0A, 0x03, 0x00, 0x60, 0xA0, 0x07,
+ 0x93, 0x68, 0x60, 0xA4, 0x0A, 0x01, 0xA4, 0x0A,
+ 0x00, 0x14, 0x0D, 0x41, 0x30, 0x35, 0x39, 0x00,
+ 0x70, 0x0A, 0x00, 0x41, 0x42, 0x31, 0x30, 0x14,
+ 0x42, 0x07, 0x41, 0x30, 0x36, 0x34, 0x01, 0xA0,
+ 0x0D, 0x92, 0x95, 0x68, 0x0A, 0x02, 0x70, 0x0A,
+ 0x01, 0x41, 0x30, 0x37, 0x37, 0xA0, 0x0D, 0x92,
+ 0x95, 0x68, 0x0A, 0x03, 0x70, 0x0A, 0x01, 0x41,
+ 0x30, 0x37, 0x38, 0xA0, 0x31, 0x93, 0x68, 0x0A,
+ 0x01, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x37, 0x39,
+ 0x70, 0x0A, 0x00, 0x41, 0x30, 0x37, 0x37, 0x70,
+ 0x0A, 0x00, 0x41, 0x30, 0x37, 0x38, 0x70, 0x0A,
+ 0x00, 0x41, 0x30, 0x38, 0x30, 0xA0, 0x0F, 0x93,
+ 0x41, 0x42, 0x30, 0x34, 0x0A, 0x01, 0x70, 0x0A,
+ 0x01, 0x41, 0x30, 0x38, 0x31, 0xA1, 0x16, 0x70,
+ 0x0A, 0x00, 0x41, 0x30, 0x37, 0x39, 0x70, 0x0A,
+ 0x01, 0x41, 0x30, 0x38, 0x30, 0x70, 0x0A, 0x00,
+ 0x41, 0x30, 0x38, 0x31, 0x70, 0x68, 0x41, 0x30,
+ 0x38, 0x32, 0x14, 0x41, 0x32, 0x41, 0x30, 0x36,
+ 0x30, 0x00, 0x70, 0x0D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x00, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x44, 0x65, 0x76, 0x69, 0x63,
+ 0x65, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x43, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x46, 0x75, 0x6E,
+ 0x63, 0x74, 0x69, 0x6F, 0x6E, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x44, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72, 0x74, 0x41,
+ 0x63, 0x53, 0x70, 0x65, 0x65, 0x64, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x45, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72,
+ 0x74, 0x4D, 0x61, 0x78, 0x53, 0x70, 0x65, 0x65,
+ 0x64, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x30,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69, 0x65, 0x50,
+ 0x6F, 0x72, 0x74, 0x41, 0x63, 0x53, 0x70, 0x65,
+ 0x65, 0x64, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x45, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x50, 0x6F, 0x72, 0x74, 0x44, 0x63, 0x53,
+ 0x70, 0x65, 0x65, 0x64, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x31, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72, 0x74, 0x43,
+ 0x75, 0x72, 0x53, 0x70, 0x65, 0x65, 0x64, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x32, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x63, 0x69, 0x65, 0x53, 0x62, 0x50,
+ 0x6F, 0x72, 0x74, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x33,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69, 0x65, 0x4C,
+ 0x69, 0x6E, 0x6B, 0x53, 0x61, 0x66, 0x65, 0x4D,
+ 0x6F, 0x64, 0x65, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x34, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x4C, 0x6F, 0x63, 0x61, 0x6C, 0x4F, 0x76,
+ 0x65, 0x72, 0x72, 0x69, 0x64, 0x65, 0x53, 0x70,
+ 0x65, 0x65, 0x64, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x35, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x53,
+ 0x74, 0x61, 0x72, 0x74, 0x50, 0x68, 0x79, 0x4C,
+ 0x61, 0x6E, 0x65, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x36, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x45, 0x6E, 0x64, 0x50, 0x68, 0x79, 0x4C,
+ 0x61, 0x6E, 0x65, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x37,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x53, 0x74, 0x61, 0x72, 0x74,
+ 0x43, 0x6F, 0x72, 0x65, 0x4C, 0x61, 0x6E, 0x65,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x38, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x45, 0x6E, 0x64,
+ 0x43, 0x6F, 0x72, 0x65, 0x4C, 0x61, 0x6E, 0x65,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x39, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x6F, 0x72, 0x74, 0x49, 0x64, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x41, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x4C, 0x69, 0x6E, 0x6B, 0x48, 0x6F, 0x74,
+ 0x70, 0x6C, 0x75, 0x67, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x42,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x0D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x00, 0x5B, 0x31, 0x14, 0x42, 0x05, 0x41,
+ 0x30, 0x39, 0x34, 0x02, 0xA0, 0x11, 0x93, 0x41,
+ 0x30, 0x39, 0x33, 0x68, 0x0A, 0x00, 0x0C, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xA4, 0x0A, 0x00, 0x70, 0x41,
+ 0x30, 0x39, 0x33, 0x68, 0x0A, 0x34, 0x60, 0xA2,
+ 0x2F, 0x0A, 0x01, 0x70, 0x41, 0x30, 0x39, 0x33,
+ 0x68, 0x7B, 0x60, 0x0A, 0xFF, 0x00, 0x61, 0xA0,
+ 0x0E, 0x93, 0x7B, 0x61, 0x0A, 0xFF, 0x00, 0x69,
+ 0xA4, 0x7B, 0x60, 0x0A, 0xFF, 0x00, 0x7B, 0x7A,
+ 0x61, 0x0A, 0x08, 0x00, 0x0A, 0xFF, 0x60, 0xA0,
+ 0x07, 0x93, 0x60, 0x0A, 0x00, 0xA4, 0x60, 0x08,
+ 0x41, 0x45, 0x53, 0x50, 0x12, 0x12, 0x08, 0x0A,
+ 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A,
+ 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x14,
+ 0x49, 0x0D, 0x41, 0x30, 0x36, 0x38, 0x01, 0x70,
+ 0x0D, 0x50, 0x63, 0x69, 0x65, 0x45, 0x70, 0x41,
+ 0x73, 0x70, 0x6D, 0x20, 0x45, 0x6E, 0x74, 0x65,
+ 0x72, 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x00, 0x60,
+ 0xA0, 0x49, 0x08, 0x92, 0x93, 0x41, 0x30, 0x39,
+ 0x33, 0x60, 0x0A, 0x00, 0x0C, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0x7B, 0x41, 0x30, 0x39, 0x33, 0x60, 0x0A,
+ 0x08, 0x0A, 0x80, 0x61, 0xA0, 0x09, 0x93, 0x61,
+ 0x0A, 0x80, 0x70, 0x0A, 0x07, 0x67, 0xA1, 0x05,
+ 0x70, 0x0A, 0x00, 0x67, 0xA2, 0x4D, 0x05, 0x92,
+ 0x94, 0x60, 0x67, 0x70, 0x41, 0x30, 0x39, 0x34,
+ 0x60, 0x0A, 0x10, 0x61, 0xA0, 0x08, 0x93, 0x61,
+ 0x0A, 0x00, 0x75, 0x60, 0x9F, 0xA0, 0x2B, 0x93,
+ 0x68, 0x0A, 0x00, 0x70, 0x41, 0x30, 0x39, 0x33,
+ 0x60, 0x72, 0x61, 0x0A, 0x10, 0x00, 0x62, 0x41,
+ 0x30, 0x39, 0x35, 0x60, 0x72, 0x61, 0x0A, 0x10,
+ 0x00, 0x7B, 0x62, 0x80, 0x0A, 0x03, 0x00, 0x00,
+ 0x70, 0x62, 0x88, 0x41, 0x45, 0x53, 0x50, 0x60,
+ 0x00, 0xA1, 0x16, 0x70, 0x83, 0x88, 0x41, 0x45,
+ 0x53, 0x50, 0x60, 0x00, 0x62, 0x41, 0x30, 0x39,
+ 0x35, 0x60, 0x72, 0x61, 0x0A, 0x10, 0x00, 0x62,
+ 0x75, 0x60, 0xA1, 0x1A, 0x70, 0x0D, 0x45, 0x6E,
+ 0x64, 0x70, 0x6F, 0x69, 0x6E, 0x74, 0x20, 0x6E,
+ 0x6F, 0x74, 0x20, 0x70, 0x72, 0x65, 0x73, 0x65,
+ 0x6E, 0x74, 0x00, 0x5B, 0x31, 0x70, 0x0D, 0x50,
+ 0x63, 0x69, 0x65, 0x45, 0x70, 0x41, 0x73, 0x70,
+ 0x6D, 0x20, 0x45, 0x78, 0x69, 0x74, 0x00, 0x5B,
+ 0x31, 0x14, 0x3D, 0x41, 0x30, 0x39, 0x35, 0x0B,
+ 0x72, 0x41, 0x47, 0x52, 0x42, 0x79, 0x41, 0x30,
+ 0x37, 0x34, 0x0A, 0x14, 0x00, 0x60, 0x72, 0x60,
+ 0x79, 0x68, 0x0A, 0x0C, 0x00, 0x60, 0x72, 0x60,
+ 0x69, 0x60, 0x5B, 0x80, 0x41, 0x44, 0x52, 0x42,
+ 0x00, 0x60, 0x0A, 0x04, 0x5B, 0x81, 0x0B, 0x41,
+ 0x44, 0x52, 0x42, 0x03, 0x41, 0x44, 0x52, 0x52,
+ 0x20, 0x70, 0x6A, 0x41, 0x44, 0x52, 0x52, 0x14,
+ 0x3C, 0x41, 0x30, 0x39, 0x33, 0x0A, 0x72, 0x41,
+ 0x47, 0x52, 0x42, 0x79, 0x41, 0x30, 0x37, 0x34,
+ 0x0A, 0x14, 0x00, 0x60, 0x72, 0x60, 0x79, 0x68,
+ 0x0A, 0x0C, 0x00, 0x60, 0x72, 0x60, 0x69, 0x60,
+ 0x5B, 0x80, 0x41, 0x44, 0x52, 0x42, 0x00, 0x60,
+ 0x0A, 0x04, 0x5B, 0x81, 0x0B, 0x41, 0x44, 0x52,
+ 0x42, 0x03, 0x41, 0x44, 0x52, 0x52, 0x20, 0xA4,
+ 0x41, 0x44, 0x52, 0x52, 0x14, 0x19, 0x41, 0x30,
+ 0x38, 0x39, 0x01, 0xA0, 0x0C, 0x92, 0x93, 0x41,
+ 0x42, 0x30, 0x42, 0x0A, 0x01, 0xA4, 0x0A, 0x00,
+ 0xA4, 0x41, 0x30, 0x37, 0x36, 0x68, 0x14, 0x49,
+ 0x25, 0x41, 0x30, 0x39, 0x30, 0x01, 0x08, 0x41,
+ 0x30, 0x36, 0x39, 0x0A, 0x00, 0x70, 0x41, 0x30,
+ 0x37, 0x30, 0x41, 0x30, 0x36, 0x39, 0x70, 0x0A,
+ 0x00, 0x41, 0x30, 0x37, 0x30, 0xA0, 0x09, 0x93,
+ 0x68, 0x0A, 0x01, 0x70, 0x0A, 0x01, 0x60, 0xA1,
+ 0x05, 0x70, 0x0A, 0x05, 0x60, 0xA2, 0x46, 0x1E,
+ 0x92, 0x93, 0x60, 0x0A, 0x08, 0xA0, 0x41, 0x04,
+ 0x93, 0x60, 0x0A, 0x01, 0xA0, 0x15, 0x94, 0x41,
+ 0x42, 0x30, 0x45, 0x0A, 0x01, 0x70, 0x41, 0x42,
+ 0x30, 0x45, 0x41, 0x42, 0x30, 0x35, 0x41, 0x30,
+ 0x33, 0x38, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x30, 0x39, 0x31, 0x0A, 0x01, 0x41, 0x42,
+ 0x30, 0x36, 0x41, 0x42, 0x30, 0x37, 0x41, 0x30,
+ 0x39, 0x32, 0x0A, 0x01, 0x70, 0x0A, 0x00, 0x41,
+ 0x30, 0x38, 0x37, 0x70, 0x0A, 0x03, 0x60, 0xA0,
+ 0x4D, 0x04, 0x93, 0x60, 0x0A, 0x03, 0x70, 0x0A,
+ 0x00, 0x61, 0x70, 0x0A, 0x00, 0x62, 0xA2, 0x2E,
+ 0x95, 0x61, 0x0A, 0x3C, 0xA0, 0x22, 0x94, 0x41,
+ 0x30, 0x36, 0x35, 0x0A, 0x04, 0x70, 0x0D, 0x20,
+ 0x44, 0x65, 0x76, 0x69, 0x63, 0x65, 0x20, 0x64,
+ 0x65, 0x74, 0x65, 0x63, 0x74, 0x65, 0x64, 0x00,
+ 0x5B, 0x31, 0x70, 0x0A, 0x01, 0x62, 0xA5, 0x5B,
+ 0x22, 0x0A, 0x01, 0x75, 0x61, 0xA0, 0x09, 0x93,
+ 0x62, 0x0A, 0x01, 0x70, 0x0A, 0x04, 0x60, 0xA1,
+ 0x05, 0x70, 0x0A, 0x05, 0x60, 0xA0, 0x45, 0x06,
+ 0x93, 0x60, 0x0A, 0x04, 0x70, 0x0A, 0x00, 0x61,
+ 0x70, 0x0A, 0x00, 0x62, 0xA2, 0x37, 0x95, 0x61,
+ 0x0A, 0x50, 0xA0, 0x2B, 0x90, 0x92, 0x95, 0x41,
+ 0x30, 0x36, 0x35, 0x0A, 0x10, 0x92, 0x94, 0x41,
+ 0x30, 0x36, 0x35, 0x0A, 0x13, 0x70, 0x0D, 0x20,
+ 0x44, 0x65, 0x76, 0x69, 0x63, 0x65, 0x20, 0x50,
+ 0x72, 0x65, 0x73, 0x65, 0x6E, 0x74, 0x00, 0x5B,
+ 0x31, 0x70, 0x0A, 0x01, 0x62, 0xA5, 0x5B, 0x22,
+ 0x0A, 0x01, 0x75, 0x61, 0xA0, 0x09, 0x93, 0x62,
+ 0x0A, 0x01, 0x70, 0x0A, 0x07, 0x60, 0xA1, 0x14,
+ 0xA0, 0x0C, 0x93, 0x41, 0x42, 0x30, 0x34, 0x0A,
+ 0x01, 0x70, 0x0A, 0x05, 0x60, 0xA1, 0x05, 0x70,
+ 0x0A, 0x06, 0x60, 0xA0, 0x45, 0x07, 0x93, 0x60,
+ 0x0A, 0x06, 0x70, 0x0A, 0x01, 0x41, 0x42, 0x30,
+ 0x34, 0x70, 0x0A, 0x01, 0x41, 0x42, 0x30, 0x35,
+ 0x41, 0x30, 0x36, 0x34, 0x0A, 0x01, 0xA0, 0x46,
+ 0x05, 0x5B, 0x12, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x4C, 0x49, 0x43, 0x66, 0x70, 0x0D,
+ 0x20, 0x43, 0x61, 0x6C, 0x6C, 0x20, 0x41, 0x4C,
+ 0x49, 0x43, 0x20, 0x6D, 0x65, 0x74, 0x68, 0x6F,
+ 0x64, 0x00, 0x5B, 0x31, 0x7D, 0x79, 0x41, 0x42,
+ 0x30, 0x43, 0x0A, 0x03, 0x00, 0x41, 0x42, 0x30,
+ 0x44, 0x61, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x4C, 0x49, 0x43, 0x61, 0x0A, 0x00, 0x5B,
+ 0x22, 0x0A, 0x02, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x4C, 0x49, 0x43, 0x61, 0x0A, 0x01,
+ 0x70, 0x0A, 0x03, 0x60, 0x9F, 0x70, 0x0A, 0x05,
+ 0x60, 0xA0, 0x44, 0x06, 0x93, 0x60, 0x0A, 0x05,
+ 0x70, 0x0D, 0x20, 0x44, 0x65, 0x76, 0x69, 0x63,
+ 0x65, 0x20, 0x6E, 0x6F, 0x74, 0x20, 0x50, 0x72,
+ 0x65, 0x73, 0x65, 0x6E, 0x74, 0x00, 0x5B, 0x31,
+ 0x41, 0x30, 0x39, 0x33, 0x0A, 0x00, 0x0A, 0x00,
+ 0x70, 0x0A, 0x01, 0x41, 0x30, 0x38, 0x37, 0x41,
+ 0x30, 0x39, 0x32, 0x0A, 0x00, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x30, 0x39, 0x31, 0x0A,
+ 0x00, 0x41, 0x42, 0x30, 0x36, 0x41, 0x42, 0x30,
+ 0x37, 0x70, 0x0A, 0x00, 0x41, 0x42, 0x30, 0x35,
+ 0x70, 0x0A, 0x00, 0x41, 0x42, 0x30, 0x34, 0x70,
+ 0x0A, 0x00, 0x41, 0x42, 0x31, 0x30, 0x70, 0x0A,
+ 0x00, 0x62, 0x70, 0x0A, 0x08, 0x60, 0xA0, 0x0D,
+ 0x93, 0x60, 0x0A, 0x07, 0x70, 0x0A, 0x01, 0x62,
+ 0x70, 0x0A, 0x08, 0x60, 0xA0, 0x0F, 0x93, 0x41,
+ 0x42, 0x30, 0x34, 0x0A, 0x00, 0x70, 0x0A, 0x00,
+ 0x41, 0x42, 0x30, 0x35, 0xA0, 0x28, 0x91, 0x94,
+ 0x41, 0x42, 0x30, 0x45, 0x0A, 0x01, 0x93, 0x41,
+ 0x50, 0x30, 0x35, 0x0A, 0x01, 0xA0, 0x17, 0x94,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x0A, 0x00, 0x00, 0x0A,
+ 0x01, 0x41, 0x30, 0x33, 0x38, 0x70, 0x41, 0x30,
+ 0x36, 0x39, 0x41, 0x30, 0x37, 0x30, 0xA4, 0x62,
+ 0x14, 0x46, 0x05, 0x41, 0x30, 0x39, 0x32, 0x01,
+ 0xA0, 0x14, 0x94, 0x41, 0x42, 0x30, 0x36, 0x41,
+ 0x42, 0x30, 0x37, 0x74, 0x41, 0x42, 0x30, 0x36,
+ 0x41, 0x42, 0x30, 0x37, 0x60, 0xA1, 0x0B, 0x74,
+ 0x41, 0x42, 0x30, 0x37, 0x41, 0x42, 0x30, 0x36,
+ 0x60, 0x75, 0x60, 0x79, 0x0A, 0x01, 0x60, 0x60,
+ 0x76, 0x60, 0x79, 0x60, 0x41, 0x42, 0x30, 0x38,
+ 0x60, 0xA0, 0x0F, 0x93, 0x68, 0x0A, 0x01, 0x7D,
+ 0x41, 0x30, 0x38, 0x38, 0x60, 0x41, 0x30, 0x38,
+ 0x38, 0xA1, 0x0D, 0x7B, 0x41, 0x30, 0x38, 0x38,
+ 0x80, 0x60, 0x00, 0x41, 0x30, 0x38, 0x38, 0x5B,
+ 0x82, 0x4A, 0xE6, 0x41, 0x42, 0x52, 0x33, 0x08,
+ 0x5F, 0x48, 0x49, 0x44, 0x0C, 0x41, 0xD0, 0x0C,
+ 0x02, 0x08, 0x5F, 0x55, 0x49, 0x44, 0x0A, 0x83,
+ 0x08, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x5C, 0x08,
+ 0x41, 0x42, 0x30, 0x30, 0x0A, 0x00, 0x08, 0x41,
+ 0x42, 0x30, 0x31, 0x0A, 0x00, 0x08, 0x41, 0x42,
+ 0x30, 0x45, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30,
+ 0x32, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x33,
+ 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x34, 0x0A,
+ 0x00, 0x08, 0x41, 0x42, 0x30, 0x35, 0x0A, 0x00,
+ 0x08, 0x41, 0x42, 0x30, 0x36, 0x0A, 0x00, 0x08,
+ 0x41, 0x42, 0x30, 0x37, 0x0A, 0x00, 0x08, 0x41,
+ 0x42, 0x30, 0x38, 0x0A, 0x00, 0x08, 0x41, 0x42,
+ 0x30, 0x39, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30,
+ 0x41, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x42,
+ 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x43, 0x0A,
+ 0x00, 0x08, 0x41, 0x42, 0x30, 0x44, 0x0A, 0x00,
+ 0x5B, 0x80, 0x41, 0x30, 0x38, 0x33, 0x00, 0x72,
+ 0x41, 0x47, 0x52, 0x42, 0x7D, 0x79, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x0D, 0x00, 0x00, 0x0A, 0x0F, 0x00, 0x79, 0x83,
+ 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32,
+ 0x0A, 0x0E, 0x00, 0x00, 0x0A, 0x0C, 0x00, 0x00,
+ 0x00, 0x0B, 0x00, 0x10, 0x5B, 0x81, 0x45, 0x04,
+ 0x41, 0x30, 0x38, 0x33, 0x01, 0x00, 0x40, 0x0C,
+ 0x00, 0x08, 0x41, 0x30, 0x37, 0x34, 0x08, 0x41,
+ 0x30, 0x37, 0x35, 0x08, 0x00, 0x48, 0x26, 0x41,
+ 0x30, 0x37, 0x30, 0x02, 0x00, 0x03, 0x41, 0x30,
+ 0x37, 0x31, 0x01, 0x00, 0x0A, 0x00, 0x0B, 0x41,
+ 0x30, 0x37, 0x32, 0x01, 0x00, 0x44, 0x0E, 0x41,
+ 0x30, 0x38, 0x32, 0x04, 0x00, 0x01, 0x41, 0x30,
+ 0x37, 0x39, 0x01, 0x00, 0x4A, 0x2B, 0x41, 0x30,
+ 0x38, 0x34, 0x20, 0x5B, 0x87, 0x16, 0x41, 0x30,
+ 0x38, 0x33, 0x41, 0x30, 0x38, 0x34, 0x0A, 0xA1,
+ 0x03, 0x00, 0x40, 0x72, 0x00, 0x0C, 0x41, 0x30,
+ 0x36, 0x36, 0x01, 0x5B, 0x87, 0x16, 0x41, 0x30,
+ 0x38, 0x33, 0x41, 0x30, 0x38, 0x34, 0x0A, 0xA2,
+ 0x03, 0x00, 0x40, 0x72, 0x00, 0x0D, 0x41, 0x30,
+ 0x38, 0x31, 0x01, 0x5B, 0x87, 0x27, 0x41, 0x30,
+ 0x38, 0x33, 0x41, 0x30, 0x38, 0x34, 0x0A, 0xA4,
+ 0x03, 0x00, 0x40, 0x72, 0x41, 0x30, 0x37, 0x37,
+ 0x01, 0x41, 0x30, 0x37, 0x38, 0x01, 0x00, 0x0B,
+ 0x41, 0x30, 0x37, 0x33, 0x02, 0x00, 0x0E, 0x41,
+ 0x30, 0x38, 0x30, 0x01, 0x5B, 0x87, 0x14, 0x41,
+ 0x30, 0x38, 0x33, 0x41, 0x30, 0x38, 0x34, 0x0A,
+ 0xA5, 0x03, 0x00, 0x40, 0x72, 0x41, 0x30, 0x36,
+ 0x35, 0x06, 0x5B, 0x80, 0x41, 0x30, 0x38, 0x35,
+ 0x00, 0x41, 0x47, 0x52, 0x42, 0x0B, 0x00, 0x10,
+ 0x5B, 0x81, 0x0E, 0x41, 0x30, 0x38, 0x35, 0x01,
+ 0x00, 0x40, 0x70, 0x41, 0x30, 0x38, 0x36, 0x20,
+ 0x5B, 0x87, 0x3C, 0x41, 0x30, 0x38, 0x35, 0x41,
+ 0x30, 0x38, 0x36, 0x7D, 0x79, 0x5E, 0x57, 0x52,
+ 0x42, 0x53, 0x0A, 0x10, 0x00, 0x72, 0x0B, 0x00,
+ 0x08, 0x77, 0x0B, 0x00, 0x01, 0x83, 0x88, 0x5C,
+ 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41,
+ 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x0B,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x40,
+ 0x72, 0x41, 0x30, 0x38, 0x37, 0x01, 0x5B, 0x87,
+ 0x20, 0x41, 0x30, 0x38, 0x35, 0x41, 0x30, 0x38,
+ 0x36, 0x7D, 0x79, 0x5E, 0x57, 0x52, 0x42, 0x53,
+ 0x0A, 0x10, 0x00, 0x0B, 0x29, 0x80, 0x00, 0x03,
+ 0x00, 0x40, 0x72, 0x41, 0x30, 0x38, 0x38, 0x10,
+ 0x08, 0x41, 0x42, 0x31, 0x30, 0x0A, 0x00, 0x14,
+ 0x4D, 0x18, 0x5F, 0x49, 0x4E, 0x49, 0x00, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x00, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x30, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x01, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x45, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x02, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x31, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x03, 0x00, 0x00, 0x41, 0x42, 0x30, 0x32, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x04, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x33, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x05, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x34, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x06, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x35, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x07, 0x00, 0x00, 0x41, 0x42, 0x30, 0x36, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x08, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x37, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x09, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x38, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x0A, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x39, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x0B, 0x00, 0x00, 0x41, 0x42, 0x30, 0x41, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x0C, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x42, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x0D, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x43, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x0E, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x44, 0x14, 0x22, 0x41,
+ 0x30, 0x36, 0x31, 0x00, 0x70, 0x41, 0x30, 0x34,
+ 0x31, 0x60, 0xA0, 0x0A, 0x93, 0x60, 0x0A, 0x01,
+ 0xA4, 0x41, 0x42, 0x30, 0x31, 0xA0, 0x0A, 0x93,
+ 0x60, 0x0A, 0x00, 0xA4, 0x41, 0x42, 0x30, 0x45,
+ 0x14, 0x1F, 0x41, 0x30, 0x35, 0x35, 0x00, 0xA0,
+ 0x15, 0x92, 0x93, 0x41, 0x42, 0x31, 0x30, 0x0A,
+ 0x00, 0xA0, 0x0B, 0x93, 0x41, 0x42, 0x31, 0x30,
+ 0x0A, 0x01, 0xA4, 0x0A, 0x01, 0xA4, 0x0A, 0x00,
+ 0x14, 0x2A, 0x41, 0x30, 0x36, 0x32, 0x00, 0xA0,
+ 0x0E, 0x92, 0x93, 0x41, 0x42, 0x30, 0x35, 0x0A,
+ 0x00, 0xA4, 0x41, 0x42, 0x30, 0x35, 0xA0, 0x11,
+ 0x94, 0x41, 0x42, 0x31, 0x30, 0x0A, 0x01, 0xA4,
+ 0x74, 0x41, 0x42, 0x31, 0x30, 0x0A, 0x01, 0x00,
+ 0xA4, 0x0A, 0x00, 0x14, 0x49, 0x07, 0x41, 0x30,
+ 0x35, 0x34, 0x00, 0xA0, 0x22, 0x93, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x50, 0x30, 0x35,
+ 0x0A, 0x00, 0xA0, 0x0E, 0x92, 0x93, 0x41, 0x42,
+ 0x30, 0x35, 0x0A, 0x00, 0xA4, 0x41, 0x42, 0x30,
+ 0x35, 0xA4, 0x41, 0x42, 0x30, 0x45, 0x70, 0x41,
+ 0x30, 0x36, 0x32, 0x60, 0xA0, 0x17, 0x92, 0x93,
+ 0x60, 0x0A, 0x00, 0xA0, 0x0C, 0x94, 0x60, 0x41,
+ 0x42, 0x30, 0x30, 0xA4, 0x41, 0x42, 0x30, 0x30,
+ 0xA1, 0x03, 0xA4, 0x60, 0x70, 0x41, 0x30, 0x36,
+ 0x31, 0x60, 0xA0, 0x28, 0x92, 0x93, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x50, 0x30, 0x33,
+ 0x0A, 0x00, 0xA0, 0x18, 0x95, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x50, 0x30, 0x33, 0x60,
+ 0xA4, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x50, 0x30, 0x33, 0xA4, 0x60, 0x14, 0x0B, 0x41,
+ 0x30, 0x35, 0x33, 0x00, 0xA4, 0x41, 0x42, 0x30,
+ 0x32, 0x14, 0x0B, 0x41, 0x30, 0x35, 0x36, 0x00,
+ 0xA4, 0x41, 0x42, 0x30, 0x30, 0x14, 0x4B, 0x13,
+ 0x41, 0x30, 0x35, 0x32, 0x01, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x63, 0x69, 0x65, 0x52, 0x65, 0x71,
+ 0x75, 0x65, 0x73, 0x74, 0x50, 0x6F, 0x72, 0x74,
+ 0x53, 0x70, 0x65, 0x65, 0x64, 0x20, 0x45, 0x6E,
+ 0x74, 0x65, 0x72, 0x20, 0x53, 0x70, 0x65, 0x65,
+ 0x64, 0x3A, 0x20, 0x00, 0x98, 0x68, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x68, 0x41,
+ 0x42, 0x30, 0x32, 0xA0, 0x14, 0x93, 0x41, 0x42,
+ 0x30, 0x33, 0x0A, 0x01, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x30, 0x36, 0x33, 0x0A, 0x01,
+ 0x41, 0x30, 0x36, 0x34, 0x68, 0xA0, 0x40, 0x0B,
+ 0x92, 0x95, 0x41, 0x30, 0x36, 0x35, 0x0A, 0x10,
+ 0xA0, 0x10, 0x92, 0x93, 0x41, 0x42, 0x31, 0x30,
+ 0x0A, 0x00, 0x70, 0x0A, 0x00, 0x41, 0x30, 0x36,
+ 0x36, 0xA1, 0x08, 0x70, 0x0A, 0x01, 0x41, 0x30,
+ 0x36, 0x36, 0xA0, 0x14, 0x93, 0x41, 0x42, 0x30,
+ 0x33, 0x0A, 0x01, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x30, 0x36, 0x37, 0x0A, 0x00, 0xA1,
+ 0x07, 0x41, 0x30, 0x36, 0x38, 0x0A, 0x00, 0x08,
+ 0x41, 0x30, 0x36, 0x39, 0x0A, 0x00, 0x70, 0x41,
+ 0x30, 0x37, 0x30, 0x41, 0x30, 0x36, 0x39, 0x70,
+ 0x0A, 0x00, 0x41, 0x30, 0x37, 0x30, 0x70, 0x0A,
+ 0x01, 0x60, 0xA2, 0x2D, 0x60, 0x70, 0x0A, 0x01,
+ 0x41, 0x30, 0x37, 0x31, 0x5B, 0x22, 0x0A, 0x1E,
+ 0xA2, 0x0C, 0x93, 0x41, 0x30, 0x37, 0x32, 0x0A,
+ 0x01, 0x5B, 0x22, 0x0A, 0x0A, 0xA0, 0x0F, 0x93,
+ 0x68, 0x0A, 0x01, 0xA0, 0x09, 0x93, 0x41, 0x30,
+ 0x37, 0x33, 0x0A, 0x00, 0xA5, 0xA1, 0x02, 0xA5,
+ 0x70, 0x41, 0x30, 0x36, 0x39, 0x41, 0x30, 0x37,
+ 0x30, 0xA0, 0x14, 0x93, 0x41, 0x42, 0x30, 0x33,
+ 0x0A, 0x01, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x30, 0x36, 0x37, 0x0A, 0x01, 0xA1, 0x07,
+ 0x41, 0x30, 0x36, 0x38, 0x0A, 0x01, 0xA0, 0x14,
+ 0x93, 0x41, 0x42, 0x30, 0x33, 0x0A, 0x01, 0x5C,
+ 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30, 0x36,
+ 0x33, 0x0A, 0x00, 0x70, 0x0D, 0x50, 0x63, 0x69,
+ 0x65, 0x52, 0x65, 0x71, 0x75, 0x65, 0x73, 0x74,
+ 0x50, 0x6F, 0x72, 0x74, 0x53, 0x70, 0x65, 0x65,
+ 0x64, 0x20, 0x45, 0x78, 0x69, 0x74, 0x00, 0x5B,
+ 0x31, 0x14, 0x28, 0x41, 0x30, 0x35, 0x37, 0x01,
+ 0x70, 0x73, 0x0D, 0x20, 0x53, 0x65, 0x74, 0x20,
+ 0x52, 0x65, 0x71, 0x75, 0x65, 0x73, 0x74, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x68, 0x00, 0x41, 0x44,
+ 0x42, 0x47, 0x5B, 0x31, 0x70, 0x68, 0x41, 0x42,
+ 0x31, 0x30, 0x14, 0x22, 0x41, 0x30, 0x35, 0x38,
+ 0x01, 0x7A, 0x68, 0x0A, 0x08, 0x60, 0xA0, 0x13,
+ 0x90, 0x92, 0x95, 0x60, 0x41, 0x30, 0x37, 0x34,
+ 0x92, 0x94, 0x60, 0x41, 0x30, 0x37, 0x35, 0xA4,
+ 0x0A, 0x01, 0xA4, 0x0A, 0x00, 0x14, 0x1F, 0x41,
+ 0x30, 0x37, 0x36, 0x01, 0x7D, 0x41, 0x42, 0x30,
+ 0x44, 0x79, 0x41, 0x42, 0x30, 0x43, 0x0A, 0x03,
+ 0x00, 0x60, 0xA0, 0x07, 0x93, 0x68, 0x60, 0xA4,
+ 0x0A, 0x01, 0xA4, 0x0A, 0x00, 0x14, 0x0D, 0x41,
+ 0x30, 0x35, 0x39, 0x00, 0x70, 0x0A, 0x00, 0x41,
+ 0x42, 0x31, 0x30, 0x14, 0x42, 0x07, 0x41, 0x30,
+ 0x36, 0x34, 0x01, 0xA0, 0x0D, 0x92, 0x95, 0x68,
+ 0x0A, 0x02, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x37,
+ 0x37, 0xA0, 0x0D, 0x92, 0x95, 0x68, 0x0A, 0x03,
+ 0x70, 0x0A, 0x01, 0x41, 0x30, 0x37, 0x38, 0xA0,
+ 0x31, 0x93, 0x68, 0x0A, 0x01, 0x70, 0x0A, 0x01,
+ 0x41, 0x30, 0x37, 0x39, 0x70, 0x0A, 0x00, 0x41,
+ 0x30, 0x37, 0x37, 0x70, 0x0A, 0x00, 0x41, 0x30,
+ 0x37, 0x38, 0x70, 0x0A, 0x00, 0x41, 0x30, 0x38,
+ 0x30, 0xA0, 0x0F, 0x93, 0x41, 0x42, 0x30, 0x34,
+ 0x0A, 0x01, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x38,
+ 0x31, 0xA1, 0x16, 0x70, 0x0A, 0x00, 0x41, 0x30,
+ 0x37, 0x39, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x38,
+ 0x30, 0x70, 0x0A, 0x00, 0x41, 0x30, 0x38, 0x31,
+ 0x70, 0x68, 0x41, 0x30, 0x38, 0x32, 0x14, 0x41,
+ 0x32, 0x41, 0x30, 0x36, 0x30, 0x00, 0x70, 0x0D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x00, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x44,
+ 0x65, 0x76, 0x69, 0x63, 0x65, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x43, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x46, 0x75, 0x6E, 0x63, 0x74, 0x69, 0x6F,
+ 0x6E, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x44,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69, 0x65, 0x50,
+ 0x6F, 0x72, 0x74, 0x41, 0x63, 0x53, 0x70, 0x65,
+ 0x65, 0x64, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x45, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x50, 0x6F, 0x72, 0x74, 0x4D, 0x61, 0x78,
+ 0x53, 0x70, 0x65, 0x65, 0x64, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x30, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72, 0x74, 0x41,
+ 0x63, 0x53, 0x70, 0x65, 0x65, 0x64, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x45, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72,
+ 0x74, 0x44, 0x63, 0x53, 0x70, 0x65, 0x65, 0x64,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x31,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69, 0x65, 0x50,
+ 0x6F, 0x72, 0x74, 0x43, 0x75, 0x72, 0x53, 0x70,
+ 0x65, 0x65, 0x64, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x32, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x53, 0x62, 0x50, 0x6F, 0x72, 0x74, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x33, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x63, 0x69, 0x65, 0x4C, 0x69, 0x6E, 0x6B, 0x53,
+ 0x61, 0x66, 0x65, 0x4D, 0x6F, 0x64, 0x65, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x34, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x63, 0x69, 0x65, 0x4C, 0x6F, 0x63,
+ 0x61, 0x6C, 0x4F, 0x76, 0x65, 0x72, 0x72, 0x69,
+ 0x64, 0x65, 0x53, 0x70, 0x65, 0x65, 0x64, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x35,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x53, 0x74, 0x61, 0x72, 0x74,
+ 0x50, 0x68, 0x79, 0x4C, 0x61, 0x6E, 0x65, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x36, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x45, 0x6E, 0x64,
+ 0x50, 0x68, 0x79, 0x4C, 0x61, 0x6E, 0x65, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x37, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x53,
+ 0x74, 0x61, 0x72, 0x74, 0x43, 0x6F, 0x72, 0x65,
+ 0x4C, 0x61, 0x6E, 0x65, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x38, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x45, 0x6E, 0x64, 0x43, 0x6F, 0x72, 0x65,
+ 0x4C, 0x61, 0x6E, 0x65, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x39,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x6F, 0x72, 0x74, 0x49,
+ 0x64, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x41, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x4C, 0x69, 0x6E,
+ 0x6B, 0x48, 0x6F, 0x74, 0x70, 0x6C, 0x75, 0x67,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x42, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x0D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x00, 0x5B, 0x31,
+ 0x14, 0x42, 0x05, 0x41, 0x30, 0x39, 0x34, 0x02,
+ 0xA0, 0x11, 0x93, 0x41, 0x30, 0x39, 0x33, 0x68,
+ 0x0A, 0x00, 0x0C, 0xFF, 0xFF, 0xFF, 0xFF, 0xA4,
+ 0x0A, 0x00, 0x70, 0x41, 0x30, 0x39, 0x33, 0x68,
+ 0x0A, 0x34, 0x60, 0xA2, 0x2F, 0x0A, 0x01, 0x70,
+ 0x41, 0x30, 0x39, 0x33, 0x68, 0x7B, 0x60, 0x0A,
+ 0xFF, 0x00, 0x61, 0xA0, 0x0E, 0x93, 0x7B, 0x61,
+ 0x0A, 0xFF, 0x00, 0x69, 0xA4, 0x7B, 0x60, 0x0A,
+ 0xFF, 0x00, 0x7B, 0x7A, 0x61, 0x0A, 0x08, 0x00,
+ 0x0A, 0xFF, 0x60, 0xA0, 0x07, 0x93, 0x60, 0x0A,
+ 0x00, 0xA4, 0x60, 0x08, 0x41, 0x45, 0x53, 0x50,
+ 0x12, 0x12, 0x08, 0x0A, 0x00, 0x0A, 0x00, 0x0A,
+ 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A,
+ 0x00, 0x0A, 0x00, 0x14, 0x49, 0x0D, 0x41, 0x30,
+ 0x36, 0x38, 0x01, 0x70, 0x0D, 0x50, 0x63, 0x69,
+ 0x65, 0x45, 0x70, 0x41, 0x73, 0x70, 0x6D, 0x20,
+ 0x45, 0x6E, 0x74, 0x65, 0x72, 0x00, 0x5B, 0x31,
+ 0x70, 0x0A, 0x00, 0x60, 0xA0, 0x49, 0x08, 0x92,
+ 0x93, 0x41, 0x30, 0x39, 0x33, 0x60, 0x0A, 0x00,
+ 0x0C, 0xFF, 0xFF, 0xFF, 0xFF, 0x7B, 0x41, 0x30,
+ 0x39, 0x33, 0x60, 0x0A, 0x08, 0x0A, 0x80, 0x61,
+ 0xA0, 0x09, 0x93, 0x61, 0x0A, 0x80, 0x70, 0x0A,
+ 0x07, 0x67, 0xA1, 0x05, 0x70, 0x0A, 0x00, 0x67,
+ 0xA2, 0x4D, 0x05, 0x92, 0x94, 0x60, 0x67, 0x70,
+ 0x41, 0x30, 0x39, 0x34, 0x60, 0x0A, 0x10, 0x61,
+ 0xA0, 0x08, 0x93, 0x61, 0x0A, 0x00, 0x75, 0x60,
+ 0x9F, 0xA0, 0x2B, 0x93, 0x68, 0x0A, 0x00, 0x70,
+ 0x41, 0x30, 0x39, 0x33, 0x60, 0x72, 0x61, 0x0A,
+ 0x10, 0x00, 0x62, 0x41, 0x30, 0x39, 0x35, 0x60,
+ 0x72, 0x61, 0x0A, 0x10, 0x00, 0x7B, 0x62, 0x80,
+ 0x0A, 0x03, 0x00, 0x00, 0x70, 0x62, 0x88, 0x41,
+ 0x45, 0x53, 0x50, 0x60, 0x00, 0xA1, 0x16, 0x70,
+ 0x83, 0x88, 0x41, 0x45, 0x53, 0x50, 0x60, 0x00,
+ 0x62, 0x41, 0x30, 0x39, 0x35, 0x60, 0x72, 0x61,
+ 0x0A, 0x10, 0x00, 0x62, 0x75, 0x60, 0xA1, 0x1A,
+ 0x70, 0x0D, 0x45, 0x6E, 0x64, 0x70, 0x6F, 0x69,
+ 0x6E, 0x74, 0x20, 0x6E, 0x6F, 0x74, 0x20, 0x70,
+ 0x72, 0x65, 0x73, 0x65, 0x6E, 0x74, 0x00, 0x5B,
+ 0x31, 0x70, 0x0D, 0x50, 0x63, 0x69, 0x65, 0x45,
+ 0x70, 0x41, 0x73, 0x70, 0x6D, 0x20, 0x45, 0x78,
+ 0x69, 0x74, 0x00, 0x5B, 0x31, 0x14, 0x3D, 0x41,
+ 0x30, 0x39, 0x35, 0x0B, 0x72, 0x41, 0x47, 0x52,
+ 0x42, 0x79, 0x41, 0x30, 0x37, 0x34, 0x0A, 0x14,
+ 0x00, 0x60, 0x72, 0x60, 0x79, 0x68, 0x0A, 0x0C,
+ 0x00, 0x60, 0x72, 0x60, 0x69, 0x60, 0x5B, 0x80,
+ 0x41, 0x44, 0x52, 0x42, 0x00, 0x60, 0x0A, 0x04,
+ 0x5B, 0x81, 0x0B, 0x41, 0x44, 0x52, 0x42, 0x03,
+ 0x41, 0x44, 0x52, 0x52, 0x20, 0x70, 0x6A, 0x41,
+ 0x44, 0x52, 0x52, 0x14, 0x3C, 0x41, 0x30, 0x39,
+ 0x33, 0x0A, 0x72, 0x41, 0x47, 0x52, 0x42, 0x79,
+ 0x41, 0x30, 0x37, 0x34, 0x0A, 0x14, 0x00, 0x60,
+ 0x72, 0x60, 0x79, 0x68, 0x0A, 0x0C, 0x00, 0x60,
+ 0x72, 0x60, 0x69, 0x60, 0x5B, 0x80, 0x41, 0x44,
+ 0x52, 0x42, 0x00, 0x60, 0x0A, 0x04, 0x5B, 0x81,
+ 0x0B, 0x41, 0x44, 0x52, 0x42, 0x03, 0x41, 0x44,
+ 0x52, 0x52, 0x20, 0xA4, 0x41, 0x44, 0x52, 0x52,
+ 0x14, 0x19, 0x41, 0x30, 0x38, 0x39, 0x01, 0xA0,
+ 0x0C, 0x92, 0x93, 0x41, 0x42, 0x30, 0x42, 0x0A,
+ 0x01, 0xA4, 0x0A, 0x00, 0xA4, 0x41, 0x30, 0x37,
+ 0x36, 0x68, 0x14, 0x49, 0x25, 0x41, 0x30, 0x39,
+ 0x30, 0x01, 0x08, 0x41, 0x30, 0x36, 0x39, 0x0A,
+ 0x00, 0x70, 0x41, 0x30, 0x37, 0x30, 0x41, 0x30,
+ 0x36, 0x39, 0x70, 0x0A, 0x00, 0x41, 0x30, 0x37,
+ 0x30, 0xA0, 0x09, 0x93, 0x68, 0x0A, 0x01, 0x70,
+ 0x0A, 0x01, 0x60, 0xA1, 0x05, 0x70, 0x0A, 0x05,
+ 0x60, 0xA2, 0x46, 0x1E, 0x92, 0x93, 0x60, 0x0A,
+ 0x08, 0xA0, 0x41, 0x04, 0x93, 0x60, 0x0A, 0x01,
+ 0xA0, 0x15, 0x94, 0x41, 0x42, 0x30, 0x45, 0x0A,
+ 0x01, 0x70, 0x41, 0x42, 0x30, 0x45, 0x41, 0x42,
+ 0x30, 0x35, 0x41, 0x30, 0x33, 0x38, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30, 0x39, 0x31,
+ 0x0A, 0x01, 0x41, 0x42, 0x30, 0x36, 0x41, 0x42,
+ 0x30, 0x37, 0x41, 0x30, 0x39, 0x32, 0x0A, 0x01,
+ 0x70, 0x0A, 0x00, 0x41, 0x30, 0x38, 0x37, 0x70,
+ 0x0A, 0x03, 0x60, 0xA0, 0x4D, 0x04, 0x93, 0x60,
+ 0x0A, 0x03, 0x70, 0x0A, 0x00, 0x61, 0x70, 0x0A,
+ 0x00, 0x62, 0xA2, 0x2E, 0x95, 0x61, 0x0A, 0x3C,
+ 0xA0, 0x22, 0x94, 0x41, 0x30, 0x36, 0x35, 0x0A,
+ 0x04, 0x70, 0x0D, 0x20, 0x44, 0x65, 0x76, 0x69,
+ 0x63, 0x65, 0x20, 0x64, 0x65, 0x74, 0x65, 0x63,
+ 0x74, 0x65, 0x64, 0x00, 0x5B, 0x31, 0x70, 0x0A,
+ 0x01, 0x62, 0xA5, 0x5B, 0x22, 0x0A, 0x01, 0x75,
+ 0x61, 0xA0, 0x09, 0x93, 0x62, 0x0A, 0x01, 0x70,
+ 0x0A, 0x04, 0x60, 0xA1, 0x05, 0x70, 0x0A, 0x05,
+ 0x60, 0xA0, 0x45, 0x06, 0x93, 0x60, 0x0A, 0x04,
+ 0x70, 0x0A, 0x00, 0x61, 0x70, 0x0A, 0x00, 0x62,
+ 0xA2, 0x37, 0x95, 0x61, 0x0A, 0x50, 0xA0, 0x2B,
+ 0x90, 0x92, 0x95, 0x41, 0x30, 0x36, 0x35, 0x0A,
+ 0x10, 0x92, 0x94, 0x41, 0x30, 0x36, 0x35, 0x0A,
+ 0x13, 0x70, 0x0D, 0x20, 0x44, 0x65, 0x76, 0x69,
+ 0x63, 0x65, 0x20, 0x50, 0x72, 0x65, 0x73, 0x65,
+ 0x6E, 0x74, 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x01,
+ 0x62, 0xA5, 0x5B, 0x22, 0x0A, 0x01, 0x75, 0x61,
+ 0xA0, 0x09, 0x93, 0x62, 0x0A, 0x01, 0x70, 0x0A,
+ 0x07, 0x60, 0xA1, 0x14, 0xA0, 0x0C, 0x93, 0x41,
+ 0x42, 0x30, 0x34, 0x0A, 0x01, 0x70, 0x0A, 0x05,
+ 0x60, 0xA1, 0x05, 0x70, 0x0A, 0x06, 0x60, 0xA0,
+ 0x45, 0x07, 0x93, 0x60, 0x0A, 0x06, 0x70, 0x0A,
+ 0x01, 0x41, 0x42, 0x30, 0x34, 0x70, 0x0A, 0x01,
+ 0x41, 0x42, 0x30, 0x35, 0x41, 0x30, 0x36, 0x34,
+ 0x0A, 0x01, 0xA0, 0x46, 0x05, 0x5B, 0x12, 0x5C,
+ 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x4C, 0x49,
+ 0x43, 0x66, 0x70, 0x0D, 0x20, 0x43, 0x61, 0x6C,
+ 0x6C, 0x20, 0x41, 0x4C, 0x49, 0x43, 0x20, 0x6D,
+ 0x65, 0x74, 0x68, 0x6F, 0x64, 0x00, 0x5B, 0x31,
+ 0x7D, 0x79, 0x41, 0x42, 0x30, 0x43, 0x0A, 0x03,
+ 0x00, 0x41, 0x42, 0x30, 0x44, 0x61, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x4C, 0x49, 0x43,
+ 0x61, 0x0A, 0x00, 0x5B, 0x22, 0x0A, 0x02, 0x5C,
+ 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x4C, 0x49,
+ 0x43, 0x61, 0x0A, 0x01, 0x70, 0x0A, 0x03, 0x60,
+ 0x9F, 0x70, 0x0A, 0x05, 0x60, 0xA0, 0x44, 0x06,
+ 0x93, 0x60, 0x0A, 0x05, 0x70, 0x0D, 0x20, 0x44,
+ 0x65, 0x76, 0x69, 0x63, 0x65, 0x20, 0x6E, 0x6F,
+ 0x74, 0x20, 0x50, 0x72, 0x65, 0x73, 0x65, 0x6E,
+ 0x74, 0x00, 0x5B, 0x31, 0x41, 0x30, 0x39, 0x33,
+ 0x0A, 0x00, 0x0A, 0x00, 0x70, 0x0A, 0x01, 0x41,
+ 0x30, 0x38, 0x37, 0x41, 0x30, 0x39, 0x32, 0x0A,
+ 0x00, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x30, 0x39, 0x31, 0x0A, 0x00, 0x41, 0x42, 0x30,
+ 0x36, 0x41, 0x42, 0x30, 0x37, 0x70, 0x0A, 0x00,
+ 0x41, 0x42, 0x30, 0x35, 0x70, 0x0A, 0x00, 0x41,
+ 0x42, 0x30, 0x34, 0x70, 0x0A, 0x00, 0x41, 0x42,
+ 0x31, 0x30, 0x70, 0x0A, 0x00, 0x62, 0x70, 0x0A,
+ 0x08, 0x60, 0xA0, 0x0D, 0x93, 0x60, 0x0A, 0x07,
+ 0x70, 0x0A, 0x01, 0x62, 0x70, 0x0A, 0x08, 0x60,
+ 0xA0, 0x0F, 0x93, 0x41, 0x42, 0x30, 0x34, 0x0A,
+ 0x00, 0x70, 0x0A, 0x00, 0x41, 0x42, 0x30, 0x35,
+ 0xA0, 0x28, 0x91, 0x94, 0x41, 0x42, 0x30, 0x45,
+ 0x0A, 0x01, 0x93, 0x41, 0x50, 0x30, 0x35, 0x0A,
+ 0x01, 0xA0, 0x17, 0x94, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x0A, 0x00, 0x00, 0x0A, 0x01, 0x41, 0x30, 0x33,
+ 0x38, 0x70, 0x41, 0x30, 0x36, 0x39, 0x41, 0x30,
+ 0x37, 0x30, 0xA4, 0x62, 0x14, 0x46, 0x05, 0x41,
+ 0x30, 0x39, 0x32, 0x01, 0xA0, 0x14, 0x94, 0x41,
+ 0x42, 0x30, 0x36, 0x41, 0x42, 0x30, 0x37, 0x74,
+ 0x41, 0x42, 0x30, 0x36, 0x41, 0x42, 0x30, 0x37,
+ 0x60, 0xA1, 0x0B, 0x74, 0x41, 0x42, 0x30, 0x37,
+ 0x41, 0x42, 0x30, 0x36, 0x60, 0x75, 0x60, 0x79,
+ 0x0A, 0x01, 0x60, 0x60, 0x76, 0x60, 0x79, 0x60,
+ 0x41, 0x42, 0x30, 0x38, 0x60, 0xA0, 0x0F, 0x93,
+ 0x68, 0x0A, 0x01, 0x7D, 0x41, 0x30, 0x38, 0x38,
+ 0x60, 0x41, 0x30, 0x38, 0x38, 0xA1, 0x0D, 0x7B,
+ 0x41, 0x30, 0x38, 0x38, 0x80, 0x60, 0x00, 0x41,
+ 0x30, 0x38, 0x38, 0x5B, 0x82, 0x4A, 0xE6, 0x41,
+ 0x42, 0x52, 0x34, 0x08, 0x5F, 0x48, 0x49, 0x44,
+ 0x0C, 0x41, 0xD0, 0x0C, 0x02, 0x08, 0x5F, 0x55,
+ 0x49, 0x44, 0x0A, 0x84, 0x08, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x70, 0x08, 0x41, 0x42, 0x30, 0x30,
+ 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x31, 0x0A,
+ 0x00, 0x08, 0x41, 0x42, 0x30, 0x45, 0x0A, 0x00,
+ 0x08, 0x41, 0x42, 0x30, 0x32, 0x0A, 0x00, 0x08,
+ 0x41, 0x42, 0x30, 0x33, 0x0A, 0x00, 0x08, 0x41,
+ 0x42, 0x30, 0x34, 0x0A, 0x00, 0x08, 0x41, 0x42,
+ 0x30, 0x35, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30,
+ 0x36, 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x37,
+ 0x0A, 0x00, 0x08, 0x41, 0x42, 0x30, 0x38, 0x0A,
+ 0x00, 0x08, 0x41, 0x42, 0x30, 0x39, 0x0A, 0x00,
+ 0x08, 0x41, 0x42, 0x30, 0x41, 0x0A, 0x00, 0x08,
+ 0x41, 0x42, 0x30, 0x42, 0x0A, 0x00, 0x08, 0x41,
+ 0x42, 0x30, 0x43, 0x0A, 0x00, 0x08, 0x41, 0x42,
+ 0x30, 0x44, 0x0A, 0x00, 0x5B, 0x80, 0x41, 0x30,
+ 0x38, 0x33, 0x00, 0x72, 0x41, 0x47, 0x52, 0x42,
+ 0x7D, 0x79, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x0D, 0x00, 0x00, 0x0A,
+ 0x0F, 0x00, 0x79, 0x83, 0x88, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72,
+ 0x41, 0x42, 0x31, 0x32, 0x0A, 0x0E, 0x00, 0x00,
+ 0x0A, 0x0C, 0x00, 0x00, 0x00, 0x0B, 0x00, 0x10,
+ 0x5B, 0x81, 0x45, 0x04, 0x41, 0x30, 0x38, 0x33,
+ 0x01, 0x00, 0x40, 0x0C, 0x00, 0x08, 0x41, 0x30,
+ 0x37, 0x34, 0x08, 0x41, 0x30, 0x37, 0x35, 0x08,
+ 0x00, 0x48, 0x26, 0x41, 0x30, 0x37, 0x30, 0x02,
+ 0x00, 0x03, 0x41, 0x30, 0x37, 0x31, 0x01, 0x00,
+ 0x0A, 0x00, 0x0B, 0x41, 0x30, 0x37, 0x32, 0x01,
+ 0x00, 0x44, 0x0E, 0x41, 0x30, 0x38, 0x32, 0x04,
+ 0x00, 0x01, 0x41, 0x30, 0x37, 0x39, 0x01, 0x00,
+ 0x4A, 0x2B, 0x41, 0x30, 0x38, 0x34, 0x20, 0x5B,
+ 0x87, 0x16, 0x41, 0x30, 0x38, 0x33, 0x41, 0x30,
+ 0x38, 0x34, 0x0A, 0xA1, 0x03, 0x00, 0x40, 0x72,
+ 0x00, 0x0C, 0x41, 0x30, 0x36, 0x36, 0x01, 0x5B,
+ 0x87, 0x16, 0x41, 0x30, 0x38, 0x33, 0x41, 0x30,
+ 0x38, 0x34, 0x0A, 0xA2, 0x03, 0x00, 0x40, 0x72,
+ 0x00, 0x0D, 0x41, 0x30, 0x38, 0x31, 0x01, 0x5B,
+ 0x87, 0x27, 0x41, 0x30, 0x38, 0x33, 0x41, 0x30,
+ 0x38, 0x34, 0x0A, 0xA4, 0x03, 0x00, 0x40, 0x72,
+ 0x41, 0x30, 0x37, 0x37, 0x01, 0x41, 0x30, 0x37,
+ 0x38, 0x01, 0x00, 0x0B, 0x41, 0x30, 0x37, 0x33,
+ 0x02, 0x00, 0x0E, 0x41, 0x30, 0x38, 0x30, 0x01,
+ 0x5B, 0x87, 0x14, 0x41, 0x30, 0x38, 0x33, 0x41,
+ 0x30, 0x38, 0x34, 0x0A, 0xA5, 0x03, 0x00, 0x40,
+ 0x72, 0x41, 0x30, 0x36, 0x35, 0x06, 0x5B, 0x80,
+ 0x41, 0x30, 0x38, 0x35, 0x00, 0x41, 0x47, 0x52,
+ 0x42, 0x0B, 0x00, 0x10, 0x5B, 0x81, 0x0E, 0x41,
+ 0x30, 0x38, 0x35, 0x01, 0x00, 0x40, 0x70, 0x41,
+ 0x30, 0x38, 0x36, 0x20, 0x5B, 0x87, 0x3C, 0x41,
+ 0x30, 0x38, 0x35, 0x41, 0x30, 0x38, 0x36, 0x7D,
+ 0x79, 0x5E, 0x57, 0x52, 0x42, 0x53, 0x0A, 0x10,
+ 0x00, 0x72, 0x0B, 0x00, 0x08, 0x77, 0x0B, 0x00,
+ 0x01, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42,
+ 0x31, 0x32, 0x0A, 0x0B, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x03, 0x00, 0x40, 0x72, 0x41, 0x30, 0x38,
+ 0x37, 0x01, 0x5B, 0x87, 0x20, 0x41, 0x30, 0x38,
+ 0x35, 0x41, 0x30, 0x38, 0x36, 0x7D, 0x79, 0x5E,
+ 0x57, 0x52, 0x42, 0x53, 0x0A, 0x10, 0x00, 0x0B,
+ 0x29, 0x80, 0x00, 0x03, 0x00, 0x40, 0x72, 0x41,
+ 0x30, 0x38, 0x38, 0x10, 0x08, 0x41, 0x42, 0x31,
+ 0x30, 0x0A, 0x00, 0x14, 0x4D, 0x18, 0x5F, 0x49,
+ 0x4E, 0x49, 0x00, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x00, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x30, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x01, 0x00, 0x00, 0x41, 0x42, 0x30, 0x45, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x02, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x31, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x03, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x32, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x04, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x33, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x05, 0x00, 0x00, 0x41, 0x42, 0x30, 0x34, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x06, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x35, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x07, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x36, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x08, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x37, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x09, 0x00, 0x00, 0x41, 0x42, 0x30, 0x38, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x0A, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x39, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x72, 0x41,
+ 0x42, 0x31, 0x32, 0x0A, 0x0B, 0x00, 0x00, 0x41,
+ 0x42, 0x30, 0x41, 0x70, 0x83, 0x88, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54,
+ 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A, 0x0C, 0x00,
+ 0x00, 0x41, 0x42, 0x30, 0x42, 0x70, 0x83, 0x88,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x44,
+ 0x41, 0x54, 0x72, 0x41, 0x42, 0x31, 0x32, 0x0A,
+ 0x0D, 0x00, 0x00, 0x41, 0x42, 0x30, 0x43, 0x70,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x72, 0x41, 0x42, 0x31,
+ 0x32, 0x0A, 0x0E, 0x00, 0x00, 0x41, 0x42, 0x30,
+ 0x44, 0x14, 0x22, 0x41, 0x30, 0x36, 0x31, 0x00,
+ 0x70, 0x41, 0x30, 0x34, 0x31, 0x60, 0xA0, 0x0A,
+ 0x93, 0x60, 0x0A, 0x01, 0xA4, 0x41, 0x42, 0x30,
+ 0x31, 0xA0, 0x0A, 0x93, 0x60, 0x0A, 0x00, 0xA4,
+ 0x41, 0x42, 0x30, 0x45, 0x14, 0x1F, 0x41, 0x30,
+ 0x35, 0x35, 0x00, 0xA0, 0x15, 0x92, 0x93, 0x41,
+ 0x42, 0x31, 0x30, 0x0A, 0x00, 0xA0, 0x0B, 0x93,
+ 0x41, 0x42, 0x31, 0x30, 0x0A, 0x01, 0xA4, 0x0A,
+ 0x01, 0xA4, 0x0A, 0x00, 0x14, 0x2A, 0x41, 0x30,
+ 0x36, 0x32, 0x00, 0xA0, 0x0E, 0x92, 0x93, 0x41,
+ 0x42, 0x30, 0x35, 0x0A, 0x00, 0xA4, 0x41, 0x42,
+ 0x30, 0x35, 0xA0, 0x11, 0x94, 0x41, 0x42, 0x31,
+ 0x30, 0x0A, 0x01, 0xA4, 0x74, 0x41, 0x42, 0x31,
+ 0x30, 0x0A, 0x01, 0x00, 0xA4, 0x0A, 0x00, 0x14,
+ 0x49, 0x07, 0x41, 0x30, 0x35, 0x34, 0x00, 0xA0,
+ 0x22, 0x93, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x50, 0x30, 0x35, 0x0A, 0x00, 0xA0, 0x0E,
+ 0x92, 0x93, 0x41, 0x42, 0x30, 0x35, 0x0A, 0x00,
+ 0xA4, 0x41, 0x42, 0x30, 0x35, 0xA4, 0x41, 0x42,
+ 0x30, 0x45, 0x70, 0x41, 0x30, 0x36, 0x32, 0x60,
+ 0xA0, 0x17, 0x92, 0x93, 0x60, 0x0A, 0x00, 0xA0,
+ 0x0C, 0x94, 0x60, 0x41, 0x42, 0x30, 0x30, 0xA4,
+ 0x41, 0x42, 0x30, 0x30, 0xA1, 0x03, 0xA4, 0x60,
+ 0x70, 0x41, 0x30, 0x36, 0x31, 0x60, 0xA0, 0x28,
+ 0x92, 0x93, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x50, 0x30, 0x33, 0x0A, 0x00, 0xA0, 0x18,
+ 0x95, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41,
+ 0x50, 0x30, 0x33, 0x60, 0xA4, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x50, 0x30, 0x33, 0xA4,
+ 0x60, 0x14, 0x0B, 0x41, 0x30, 0x35, 0x33, 0x00,
+ 0xA4, 0x41, 0x42, 0x30, 0x32, 0x14, 0x0B, 0x41,
+ 0x30, 0x35, 0x36, 0x00, 0xA4, 0x41, 0x42, 0x30,
+ 0x30, 0x14, 0x4B, 0x13, 0x41, 0x30, 0x35, 0x32,
+ 0x01, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x52, 0x65, 0x71, 0x75, 0x65, 0x73, 0x74,
+ 0x50, 0x6F, 0x72, 0x74, 0x53, 0x70, 0x65, 0x65,
+ 0x64, 0x20, 0x45, 0x6E, 0x74, 0x65, 0x72, 0x20,
+ 0x53, 0x70, 0x65, 0x65, 0x64, 0x3A, 0x20, 0x00,
+ 0x98, 0x68, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x68, 0x41, 0x42, 0x30, 0x32, 0xA0,
+ 0x14, 0x93, 0x41, 0x42, 0x30, 0x33, 0x0A, 0x01,
+ 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30,
+ 0x36, 0x33, 0x0A, 0x01, 0x41, 0x30, 0x36, 0x34,
+ 0x68, 0xA0, 0x40, 0x0B, 0x92, 0x95, 0x41, 0x30,
+ 0x36, 0x35, 0x0A, 0x10, 0xA0, 0x10, 0x92, 0x93,
+ 0x41, 0x42, 0x31, 0x30, 0x0A, 0x00, 0x70, 0x0A,
+ 0x00, 0x41, 0x30, 0x36, 0x36, 0xA1, 0x08, 0x70,
+ 0x0A, 0x01, 0x41, 0x30, 0x36, 0x36, 0xA0, 0x14,
+ 0x93, 0x41, 0x42, 0x30, 0x33, 0x0A, 0x01, 0x5C,
+ 0x2E, 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30, 0x36,
+ 0x37, 0x0A, 0x00, 0xA1, 0x07, 0x41, 0x30, 0x36,
+ 0x38, 0x0A, 0x00, 0x08, 0x41, 0x30, 0x36, 0x39,
+ 0x0A, 0x00, 0x70, 0x41, 0x30, 0x37, 0x30, 0x41,
+ 0x30, 0x36, 0x39, 0x70, 0x0A, 0x00, 0x41, 0x30,
+ 0x37, 0x30, 0x70, 0x0A, 0x01, 0x60, 0xA2, 0x2D,
+ 0x60, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x37, 0x31,
+ 0x5B, 0x22, 0x0A, 0x1E, 0xA2, 0x0C, 0x93, 0x41,
+ 0x30, 0x37, 0x32, 0x0A, 0x01, 0x5B, 0x22, 0x0A,
+ 0x0A, 0xA0, 0x0F, 0x93, 0x68, 0x0A, 0x01, 0xA0,
+ 0x09, 0x93, 0x41, 0x30, 0x37, 0x33, 0x0A, 0x00,
+ 0xA5, 0xA1, 0x02, 0xA5, 0x70, 0x41, 0x30, 0x36,
+ 0x39, 0x41, 0x30, 0x37, 0x30, 0xA0, 0x14, 0x93,
+ 0x41, 0x42, 0x30, 0x33, 0x0A, 0x01, 0x5C, 0x2E,
+ 0x5F, 0x53, 0x42, 0x5F, 0x41, 0x30, 0x36, 0x37,
+ 0x0A, 0x01, 0xA1, 0x07, 0x41, 0x30, 0x36, 0x38,
+ 0x0A, 0x01, 0xA0, 0x14, 0x93, 0x41, 0x42, 0x30,
+ 0x33, 0x0A, 0x01, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x30, 0x36, 0x33, 0x0A, 0x00, 0x70,
+ 0x0D, 0x50, 0x63, 0x69, 0x65, 0x52, 0x65, 0x71,
+ 0x75, 0x65, 0x73, 0x74, 0x50, 0x6F, 0x72, 0x74,
+ 0x53, 0x70, 0x65, 0x65, 0x64, 0x20, 0x45, 0x78,
+ 0x69, 0x74, 0x00, 0x5B, 0x31, 0x14, 0x28, 0x41,
+ 0x30, 0x35, 0x37, 0x01, 0x70, 0x73, 0x0D, 0x20,
+ 0x53, 0x65, 0x74, 0x20, 0x52, 0x65, 0x71, 0x75,
+ 0x65, 0x73, 0x74, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x68, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31,
+ 0x70, 0x68, 0x41, 0x42, 0x31, 0x30, 0x14, 0x22,
+ 0x41, 0x30, 0x35, 0x38, 0x01, 0x7A, 0x68, 0x0A,
+ 0x08, 0x60, 0xA0, 0x13, 0x90, 0x92, 0x95, 0x60,
+ 0x41, 0x30, 0x37, 0x34, 0x92, 0x94, 0x60, 0x41,
+ 0x30, 0x37, 0x35, 0xA4, 0x0A, 0x01, 0xA4, 0x0A,
+ 0x00, 0x14, 0x1F, 0x41, 0x30, 0x37, 0x36, 0x01,
+ 0x7D, 0x41, 0x42, 0x30, 0x44, 0x79, 0x41, 0x42,
+ 0x30, 0x43, 0x0A, 0x03, 0x00, 0x60, 0xA0, 0x07,
+ 0x93, 0x68, 0x60, 0xA4, 0x0A, 0x01, 0xA4, 0x0A,
+ 0x00, 0x14, 0x0D, 0x41, 0x30, 0x35, 0x39, 0x00,
+ 0x70, 0x0A, 0x00, 0x41, 0x42, 0x31, 0x30, 0x14,
+ 0x42, 0x07, 0x41, 0x30, 0x36, 0x34, 0x01, 0xA0,
+ 0x0D, 0x92, 0x95, 0x68, 0x0A, 0x02, 0x70, 0x0A,
+ 0x01, 0x41, 0x30, 0x37, 0x37, 0xA0, 0x0D, 0x92,
+ 0x95, 0x68, 0x0A, 0x03, 0x70, 0x0A, 0x01, 0x41,
+ 0x30, 0x37, 0x38, 0xA0, 0x31, 0x93, 0x68, 0x0A,
+ 0x01, 0x70, 0x0A, 0x01, 0x41, 0x30, 0x37, 0x39,
+ 0x70, 0x0A, 0x00, 0x41, 0x30, 0x37, 0x37, 0x70,
+ 0x0A, 0x00, 0x41, 0x30, 0x37, 0x38, 0x70, 0x0A,
+ 0x00, 0x41, 0x30, 0x38, 0x30, 0xA0, 0x0F, 0x93,
+ 0x41, 0x42, 0x30, 0x34, 0x0A, 0x01, 0x70, 0x0A,
+ 0x01, 0x41, 0x30, 0x38, 0x31, 0xA1, 0x16, 0x70,
+ 0x0A, 0x00, 0x41, 0x30, 0x37, 0x39, 0x70, 0x0A,
+ 0x01, 0x41, 0x30, 0x38, 0x30, 0x70, 0x0A, 0x00,
+ 0x41, 0x30, 0x38, 0x31, 0x70, 0x68, 0x41, 0x30,
+ 0x38, 0x32, 0x14, 0x41, 0x32, 0x41, 0x30, 0x36,
+ 0x30, 0x00, 0x70, 0x0D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x00, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x44, 0x65, 0x76, 0x69, 0x63,
+ 0x65, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x43, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x46, 0x75, 0x6E,
+ 0x63, 0x74, 0x69, 0x6F, 0x6E, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x44, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72, 0x74, 0x41,
+ 0x63, 0x53, 0x70, 0x65, 0x65, 0x64, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x45, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72,
+ 0x74, 0x4D, 0x61, 0x78, 0x53, 0x70, 0x65, 0x65,
+ 0x64, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x30,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69, 0x65, 0x50,
+ 0x6F, 0x72, 0x74, 0x41, 0x63, 0x53, 0x70, 0x65,
+ 0x65, 0x64, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x45, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x50, 0x6F, 0x72, 0x74, 0x44, 0x63, 0x53,
+ 0x70, 0x65, 0x65, 0x64, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x31, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x63, 0x69, 0x65, 0x50, 0x6F, 0x72, 0x74, 0x43,
+ 0x75, 0x72, 0x53, 0x70, 0x65, 0x65, 0x64, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x32, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x50, 0x63, 0x69, 0x65, 0x53, 0x62, 0x50,
+ 0x6F, 0x72, 0x74, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x33,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69, 0x65, 0x4C,
+ 0x69, 0x6E, 0x6B, 0x53, 0x61, 0x66, 0x65, 0x4D,
+ 0x6F, 0x64, 0x65, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x34, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50, 0x63, 0x69,
+ 0x65, 0x4C, 0x6F, 0x63, 0x61, 0x6C, 0x4F, 0x76,
+ 0x65, 0x72, 0x72, 0x69, 0x64, 0x65, 0x53, 0x70,
+ 0x65, 0x65, 0x64, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x35, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x53,
+ 0x74, 0x61, 0x72, 0x74, 0x50, 0x68, 0x79, 0x4C,
+ 0x61, 0x6E, 0x65, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x36, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x45, 0x6E, 0x64, 0x50, 0x68, 0x79, 0x4C,
+ 0x61, 0x6E, 0x65, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x37,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x73, 0x0D, 0x20, 0x53, 0x74, 0x61, 0x72, 0x74,
+ 0x43, 0x6F, 0x72, 0x65, 0x4C, 0x61, 0x6E, 0x65,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42,
+ 0x30, 0x38, 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B,
+ 0x31, 0x70, 0x73, 0x0D, 0x20, 0x45, 0x6E, 0x64,
+ 0x43, 0x6F, 0x72, 0x65, 0x4C, 0x61, 0x6E, 0x65,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20, 0x00, 0x98,
+ 0x41, 0x42, 0x30, 0x39, 0x00, 0x41, 0x44, 0x42,
+ 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D, 0x20, 0x50,
+ 0x6F, 0x72, 0x74, 0x49, 0x64, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3A, 0x20,
+ 0x00, 0x98, 0x41, 0x42, 0x30, 0x41, 0x00, 0x41,
+ 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70, 0x73, 0x0D,
+ 0x20, 0x4C, 0x69, 0x6E, 0x6B, 0x48, 0x6F, 0x74,
+ 0x70, 0x6C, 0x75, 0x67, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x3A, 0x20, 0x00, 0x98, 0x41, 0x42, 0x30, 0x42,
+ 0x00, 0x41, 0x44, 0x42, 0x47, 0x5B, 0x31, 0x70,
+ 0x0D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D, 0x2D,
+ 0x2D, 0x00, 0x5B, 0x31, 0x14, 0x42, 0x05, 0x41,
+ 0x30, 0x39, 0x34, 0x02, 0xA0, 0x11, 0x93, 0x41,
+ 0x30, 0x39, 0x33, 0x68, 0x0A, 0x00, 0x0C, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xA4, 0x0A, 0x00, 0x70, 0x41,
+ 0x30, 0x39, 0x33, 0x68, 0x0A, 0x34, 0x60, 0xA2,
+ 0x2F, 0x0A, 0x01, 0x70, 0x41, 0x30, 0x39, 0x33,
+ 0x68, 0x7B, 0x60, 0x0A, 0xFF, 0x00, 0x61, 0xA0,
+ 0x0E, 0x93, 0x7B, 0x61, 0x0A, 0xFF, 0x00, 0x69,
+ 0xA4, 0x7B, 0x60, 0x0A, 0xFF, 0x00, 0x7B, 0x7A,
+ 0x61, 0x0A, 0x08, 0x00, 0x0A, 0xFF, 0x60, 0xA0,
+ 0x07, 0x93, 0x60, 0x0A, 0x00, 0xA4, 0x60, 0x08,
+ 0x41, 0x45, 0x53, 0x50, 0x12, 0x12, 0x08, 0x0A,
+ 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A,
+ 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x0A, 0x00, 0x14,
+ 0x49, 0x0D, 0x41, 0x30, 0x36, 0x38, 0x01, 0x70,
+ 0x0D, 0x50, 0x63, 0x69, 0x65, 0x45, 0x70, 0x41,
+ 0x73, 0x70, 0x6D, 0x20, 0x45, 0x6E, 0x74, 0x65,
+ 0x72, 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x00, 0x60,
+ 0xA0, 0x49, 0x08, 0x92, 0x93, 0x41, 0x30, 0x39,
+ 0x33, 0x60, 0x0A, 0x00, 0x0C, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0x7B, 0x41, 0x30, 0x39, 0x33, 0x60, 0x0A,
+ 0x08, 0x0A, 0x80, 0x61, 0xA0, 0x09, 0x93, 0x61,
+ 0x0A, 0x80, 0x70, 0x0A, 0x07, 0x67, 0xA1, 0x05,
+ 0x70, 0x0A, 0x00, 0x67, 0xA2, 0x4D, 0x05, 0x92,
+ 0x94, 0x60, 0x67, 0x70, 0x41, 0x30, 0x39, 0x34,
+ 0x60, 0x0A, 0x10, 0x61, 0xA0, 0x08, 0x93, 0x61,
+ 0x0A, 0x00, 0x75, 0x60, 0x9F, 0xA0, 0x2B, 0x93,
+ 0x68, 0x0A, 0x00, 0x70, 0x41, 0x30, 0x39, 0x33,
+ 0x60, 0x72, 0x61, 0x0A, 0x10, 0x00, 0x62, 0x41,
+ 0x30, 0x39, 0x35, 0x60, 0x72, 0x61, 0x0A, 0x10,
+ 0x00, 0x7B, 0x62, 0x80, 0x0A, 0x03, 0x00, 0x00,
+ 0x70, 0x62, 0x88, 0x41, 0x45, 0x53, 0x50, 0x60,
+ 0x00, 0xA1, 0x16, 0x70, 0x83, 0x88, 0x41, 0x45,
+ 0x53, 0x50, 0x60, 0x00, 0x62, 0x41, 0x30, 0x39,
+ 0x35, 0x60, 0x72, 0x61, 0x0A, 0x10, 0x00, 0x62,
+ 0x75, 0x60, 0xA1, 0x1A, 0x70, 0x0D, 0x45, 0x6E,
+ 0x64, 0x70, 0x6F, 0x69, 0x6E, 0x74, 0x20, 0x6E,
+ 0x6F, 0x74, 0x20, 0x70, 0x72, 0x65, 0x73, 0x65,
+ 0x6E, 0x74, 0x00, 0x5B, 0x31, 0x70, 0x0D, 0x50,
+ 0x63, 0x69, 0x65, 0x45, 0x70, 0x41, 0x73, 0x70,
+ 0x6D, 0x20, 0x45, 0x78, 0x69, 0x74, 0x00, 0x5B,
+ 0x31, 0x14, 0x3D, 0x41, 0x30, 0x39, 0x35, 0x0B,
+ 0x72, 0x41, 0x47, 0x52, 0x42, 0x79, 0x41, 0x30,
+ 0x37, 0x34, 0x0A, 0x14, 0x00, 0x60, 0x72, 0x60,
+ 0x79, 0x68, 0x0A, 0x0C, 0x00, 0x60, 0x72, 0x60,
+ 0x69, 0x60, 0x5B, 0x80, 0x41, 0x44, 0x52, 0x42,
+ 0x00, 0x60, 0x0A, 0x04, 0x5B, 0x81, 0x0B, 0x41,
+ 0x44, 0x52, 0x42, 0x03, 0x41, 0x44, 0x52, 0x52,
+ 0x20, 0x70, 0x6A, 0x41, 0x44, 0x52, 0x52, 0x14,
+ 0x3C, 0x41, 0x30, 0x39, 0x33, 0x0A, 0x72, 0x41,
+ 0x47, 0x52, 0x42, 0x79, 0x41, 0x30, 0x37, 0x34,
+ 0x0A, 0x14, 0x00, 0x60, 0x72, 0x60, 0x79, 0x68,
+ 0x0A, 0x0C, 0x00, 0x60, 0x72, 0x60, 0x69, 0x60,
+ 0x5B, 0x80, 0x41, 0x44, 0x52, 0x42, 0x00, 0x60,
+ 0x0A, 0x04, 0x5B, 0x81, 0x0B, 0x41, 0x44, 0x52,
+ 0x42, 0x03, 0x41, 0x44, 0x52, 0x52, 0x20, 0xA4,
+ 0x41, 0x44, 0x52, 0x52, 0x14, 0x19, 0x41, 0x30,
+ 0x38, 0x39, 0x01, 0xA0, 0x0C, 0x92, 0x93, 0x41,
+ 0x42, 0x30, 0x42, 0x0A, 0x01, 0xA4, 0x0A, 0x00,
+ 0xA4, 0x41, 0x30, 0x37, 0x36, 0x68, 0x14, 0x49,
+ 0x25, 0x41, 0x30, 0x39, 0x30, 0x01, 0x08, 0x41,
+ 0x30, 0x36, 0x39, 0x0A, 0x00, 0x70, 0x41, 0x30,
+ 0x37, 0x30, 0x41, 0x30, 0x36, 0x39, 0x70, 0x0A,
+ 0x00, 0x41, 0x30, 0x37, 0x30, 0xA0, 0x09, 0x93,
+ 0x68, 0x0A, 0x01, 0x70, 0x0A, 0x01, 0x60, 0xA1,
+ 0x05, 0x70, 0x0A, 0x05, 0x60, 0xA2, 0x46, 0x1E,
+ 0x92, 0x93, 0x60, 0x0A, 0x08, 0xA0, 0x41, 0x04,
+ 0x93, 0x60, 0x0A, 0x01, 0xA0, 0x15, 0x94, 0x41,
+ 0x42, 0x30, 0x45, 0x0A, 0x01, 0x70, 0x41, 0x42,
+ 0x30, 0x45, 0x41, 0x42, 0x30, 0x35, 0x41, 0x30,
+ 0x33, 0x38, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x30, 0x39, 0x31, 0x0A, 0x01, 0x41, 0x42,
+ 0x30, 0x36, 0x41, 0x42, 0x30, 0x37, 0x41, 0x30,
+ 0x39, 0x32, 0x0A, 0x01, 0x70, 0x0A, 0x00, 0x41,
+ 0x30, 0x38, 0x37, 0x70, 0x0A, 0x03, 0x60, 0xA0,
+ 0x4D, 0x04, 0x93, 0x60, 0x0A, 0x03, 0x70, 0x0A,
+ 0x00, 0x61, 0x70, 0x0A, 0x00, 0x62, 0xA2, 0x2E,
+ 0x95, 0x61, 0x0A, 0x3C, 0xA0, 0x22, 0x94, 0x41,
+ 0x30, 0x36, 0x35, 0x0A, 0x04, 0x70, 0x0D, 0x20,
+ 0x44, 0x65, 0x76, 0x69, 0x63, 0x65, 0x20, 0x64,
+ 0x65, 0x74, 0x65, 0x63, 0x74, 0x65, 0x64, 0x00,
+ 0x5B, 0x31, 0x70, 0x0A, 0x01, 0x62, 0xA5, 0x5B,
+ 0x22, 0x0A, 0x01, 0x75, 0x61, 0xA0, 0x09, 0x93,
+ 0x62, 0x0A, 0x01, 0x70, 0x0A, 0x04, 0x60, 0xA1,
+ 0x05, 0x70, 0x0A, 0x05, 0x60, 0xA0, 0x45, 0x06,
+ 0x93, 0x60, 0x0A, 0x04, 0x70, 0x0A, 0x00, 0x61,
+ 0x70, 0x0A, 0x00, 0x62, 0xA2, 0x37, 0x95, 0x61,
+ 0x0A, 0x50, 0xA0, 0x2B, 0x90, 0x92, 0x95, 0x41,
+ 0x30, 0x36, 0x35, 0x0A, 0x10, 0x92, 0x94, 0x41,
+ 0x30, 0x36, 0x35, 0x0A, 0x13, 0x70, 0x0D, 0x20,
+ 0x44, 0x65, 0x76, 0x69, 0x63, 0x65, 0x20, 0x50,
+ 0x72, 0x65, 0x73, 0x65, 0x6E, 0x74, 0x00, 0x5B,
+ 0x31, 0x70, 0x0A, 0x01, 0x62, 0xA5, 0x5B, 0x22,
+ 0x0A, 0x01, 0x75, 0x61, 0xA0, 0x09, 0x93, 0x62,
+ 0x0A, 0x01, 0x70, 0x0A, 0x07, 0x60, 0xA1, 0x14,
+ 0xA0, 0x0C, 0x93, 0x41, 0x42, 0x30, 0x34, 0x0A,
+ 0x01, 0x70, 0x0A, 0x05, 0x60, 0xA1, 0x05, 0x70,
+ 0x0A, 0x06, 0x60, 0xA0, 0x45, 0x07, 0x93, 0x60,
+ 0x0A, 0x06, 0x70, 0x0A, 0x01, 0x41, 0x42, 0x30,
+ 0x34, 0x70, 0x0A, 0x01, 0x41, 0x42, 0x30, 0x35,
+ 0x41, 0x30, 0x36, 0x34, 0x0A, 0x01, 0xA0, 0x46,
+ 0x05, 0x5B, 0x12, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x4C, 0x49, 0x43, 0x66, 0x70, 0x0D,
+ 0x20, 0x43, 0x61, 0x6C, 0x6C, 0x20, 0x41, 0x4C,
+ 0x49, 0x43, 0x20, 0x6D, 0x65, 0x74, 0x68, 0x6F,
+ 0x64, 0x00, 0x5B, 0x31, 0x7D, 0x79, 0x41, 0x42,
+ 0x30, 0x43, 0x0A, 0x03, 0x00, 0x41, 0x42, 0x30,
+ 0x44, 0x61, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x4C, 0x49, 0x43, 0x61, 0x0A, 0x00, 0x5B,
+ 0x22, 0x0A, 0x02, 0x5C, 0x2E, 0x5F, 0x53, 0x42,
+ 0x5F, 0x41, 0x4C, 0x49, 0x43, 0x61, 0x0A, 0x01,
+ 0x70, 0x0A, 0x03, 0x60, 0x9F, 0x70, 0x0A, 0x05,
+ 0x60, 0xA0, 0x44, 0x06, 0x93, 0x60, 0x0A, 0x05,
+ 0x70, 0x0D, 0x20, 0x44, 0x65, 0x76, 0x69, 0x63,
+ 0x65, 0x20, 0x6E, 0x6F, 0x74, 0x20, 0x50, 0x72,
+ 0x65, 0x73, 0x65, 0x6E, 0x74, 0x00, 0x5B, 0x31,
+ 0x41, 0x30, 0x39, 0x33, 0x0A, 0x00, 0x0A, 0x00,
+ 0x70, 0x0A, 0x01, 0x41, 0x30, 0x38, 0x37, 0x41,
+ 0x30, 0x39, 0x32, 0x0A, 0x00, 0x5C, 0x2E, 0x5F,
+ 0x53, 0x42, 0x5F, 0x41, 0x30, 0x39, 0x31, 0x0A,
+ 0x00, 0x41, 0x42, 0x30, 0x36, 0x41, 0x42, 0x30,
+ 0x37, 0x70, 0x0A, 0x00, 0x41, 0x42, 0x30, 0x35,
+ 0x70, 0x0A, 0x00, 0x41, 0x42, 0x30, 0x34, 0x70,
+ 0x0A, 0x00, 0x41, 0x42, 0x31, 0x30, 0x70, 0x0A,
+ 0x00, 0x62, 0x70, 0x0A, 0x08, 0x60, 0xA0, 0x0D,
+ 0x93, 0x60, 0x0A, 0x07, 0x70, 0x0A, 0x01, 0x62,
+ 0x70, 0x0A, 0x08, 0x60, 0xA0, 0x0F, 0x93, 0x41,
+ 0x42, 0x30, 0x34, 0x0A, 0x00, 0x70, 0x0A, 0x00,
+ 0x41, 0x42, 0x30, 0x35, 0xA0, 0x28, 0x91, 0x94,
+ 0x41, 0x42, 0x30, 0x45, 0x0A, 0x01, 0x93, 0x41,
+ 0x50, 0x30, 0x35, 0x0A, 0x01, 0xA0, 0x17, 0x94,
+ 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53, 0x42, 0x5F,
+ 0x41, 0x44, 0x41, 0x54, 0x0A, 0x00, 0x00, 0x0A,
+ 0x01, 0x41, 0x30, 0x33, 0x38, 0x70, 0x41, 0x30,
+ 0x36, 0x39, 0x41, 0x30, 0x37, 0x30, 0xA4, 0x62,
+ 0x14, 0x46, 0x05, 0x41, 0x30, 0x39, 0x32, 0x01,
+ 0xA0, 0x14, 0x94, 0x41, 0x42, 0x30, 0x36, 0x41,
+ 0x42, 0x30, 0x37, 0x74, 0x41, 0x42, 0x30, 0x36,
+ 0x41, 0x42, 0x30, 0x37, 0x60, 0xA1, 0x0B, 0x74,
+ 0x41, 0x42, 0x30, 0x37, 0x41, 0x42, 0x30, 0x36,
+ 0x60, 0x75, 0x60, 0x79, 0x0A, 0x01, 0x60, 0x60,
+ 0x76, 0x60, 0x79, 0x60, 0x41, 0x42, 0x30, 0x38,
+ 0x60, 0xA0, 0x0F, 0x93, 0x68, 0x0A, 0x01, 0x7D,
+ 0x41, 0x30, 0x38, 0x38, 0x60, 0x41, 0x30, 0x38,
+ 0x38, 0xA1, 0x0D, 0x7B, 0x41, 0x30, 0x38, 0x38,
+ 0x80, 0x60, 0x00, 0x41, 0x30, 0x38, 0x38, 0x08,
+ 0x41, 0x30, 0x30, 0x31, 0x0A, 0x01, 0x08, 0x41,
+ 0x30, 0x30, 0x32, 0x0A, 0x01, 0x08, 0x41, 0x30,
+ 0x30, 0x33, 0x0A, 0x00, 0x08, 0x41, 0x30, 0x30,
+ 0x34, 0x0A, 0x00, 0x14, 0x28, 0x41, 0x50, 0x54,
+ 0x53, 0x01, 0xA0, 0x21, 0x93, 0x68, 0x0A, 0x03,
+ 0x41, 0x30, 0x30, 0x35, 0x0A, 0x01, 0x70, 0x41,
+ 0x30, 0x30, 0x36, 0x0A, 0x00, 0x41, 0x30, 0x30,
+ 0x33, 0x70, 0x41, 0x30, 0x30, 0x37, 0x0A, 0x00,
+ 0x41, 0x30, 0x30, 0x34, 0x14, 0x4F, 0x09, 0x41,
+ 0x57, 0x41, 0x4B, 0x01, 0xA0, 0x47, 0x08, 0x93,
+ 0x68, 0x0A, 0x03, 0x70, 0x41, 0x30, 0x30, 0x38,
+ 0x60, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x0A, 0x06,
+ 0x00, 0x61, 0xA0, 0x31, 0x90, 0x93, 0x60, 0x0A,
+ 0x01, 0x93, 0x61, 0x0A, 0x01, 0x70, 0x0D, 0x20,
+ 0x44, 0x63, 0x54, 0x44, 0x50, 0x20, 0x63, 0x61,
+ 0x70, 0x61, 0x62, 0x6C, 0x65, 0x20, 0x61, 0x6E,
+ 0x64, 0x20, 0x65, 0x6E, 0x61, 0x62, 0x6C, 0x65,
+ 0x64, 0x00, 0x5B, 0x31, 0x41, 0x30, 0x30, 0x39,
+ 0x44, 0x4B, 0x30, 0x30, 0xA1, 0x09, 0x41, 0x30,
+ 0x30, 0x35, 0x41, 0x44, 0x30, 0x30, 0xA0, 0x0E,
+ 0x93, 0x41, 0x30, 0x30, 0x33, 0x0A, 0x00, 0x41,
+ 0x30, 0x30, 0x36, 0x0A, 0x01, 0xA1, 0x07, 0x41,
+ 0x30, 0x30, 0x36, 0x0A, 0x00, 0xA0, 0x0E, 0x93,
+ 0x41, 0x30, 0x30, 0x34, 0x0A, 0x01, 0x41, 0x30,
+ 0x30, 0x37, 0x0A, 0x01, 0xA1, 0x07, 0x41, 0x30,
+ 0x30, 0x37, 0x0A, 0x00, 0xA0, 0x0F, 0x91, 0x93,
+ 0x68, 0x0A, 0x03, 0x93, 0x68, 0x0A, 0x04, 0x41,
+ 0x30, 0x31, 0x30, 0x68, 0x14, 0x2E, 0x41, 0x30,
+ 0x31, 0x31, 0x00, 0x41, 0x30, 0x31, 0x32, 0x41,
+ 0x30, 0x31, 0x33, 0x41, 0x50, 0x30, 0x31, 0x41,
+ 0x44, 0x30, 0x30, 0x41, 0x30, 0x31, 0x34, 0x41,
+ 0x44, 0x30, 0x30, 0x41, 0x30, 0x31, 0x35, 0x41,
+ 0x44, 0x30, 0x30, 0x41, 0x30, 0x30, 0x35, 0x41,
+ 0x44, 0x30, 0x30, 0x14, 0x40, 0x05, 0x41, 0x30,
+ 0x31, 0x36, 0x00, 0x70, 0x41, 0x30, 0x30, 0x38,
+ 0x60, 0x70, 0x83, 0x88, 0x5C, 0x2E, 0x5F, 0x53,
+ 0x42, 0x5F, 0x41, 0x44, 0x41, 0x54, 0x0A, 0x06,
+ 0x00, 0x61, 0xA0, 0x31, 0x90, 0x93, 0x60, 0x0A,
+ 0x01, 0x93, 0x61, 0x0A, 0x01, 0x70, 0x0D, 0x20,
+ 0x44, 0x63, 0x54, 0x44, 0x50, 0x20, 0x63, 0x61,
+ 0x70, 0x61, 0x62, 0x6C, 0x65, 0x20, 0x61, 0x6E,
+ 0x64, 0x20, 0x65, 0x6E, 0x61, 0x62, 0x6C, 0x65,
+ 0x64, 0x00, 0x5B, 0x31, 0x41, 0x30, 0x30, 0x39,
+ 0x44, 0x4B, 0x30, 0x30, 0x14, 0x0F, 0x41, 0x30,
+ 0x31, 0x37, 0x02, 0x41, 0x30, 0x31, 0x33, 0x68,
+ 0x41, 0x44, 0x30, 0x30, 0x08, 0x41, 0x30, 0x31,
+ 0x38, 0x0A, 0x00, 0x08, 0x41, 0x30, 0x31, 0x39,
+ 0x0A, 0x00, 0x14, 0x4F, 0x16, 0x41, 0x30, 0x31,
+ 0x34, 0x01, 0xA0, 0x45, 0x0B, 0x93, 0x68, 0x0A,
+ 0x00, 0x70, 0x0A, 0x7F, 0x41, 0x30, 0x32, 0x30,
+ 0x70, 0x0D, 0x20, 0x46, 0x34, 0x78, 0x31, 0x32,
+ 0x38, 0x5B, 0x43, 0x61, 0x63, 0x68, 0x65, 0x46,
+ 0x6C, 0x75, 0x73, 0x68, 0x54, 0x6D, 0x72, 0x5D,
+ 0x20, 0x3D, 0x20, 0x30, 0x78, 0x37, 0x46, 0x00,
+ 0x5B, 0x31, 0x70, 0x0A, 0x02, 0x41, 0x30, 0x32,
+ 0x31, 0x70, 0x0D, 0x20, 0x46, 0x34, 0x78, 0x32,
+ 0x31, 0x30, 0x5B, 0x58, 0x43, 0x36, 0x4D, 0x6F,
+ 0x6E, 0x4D, 0x69, 0x73, 0x70, 0x72, 0x65, 0x64,
+ 0x69, 0x63, 0x74, 0x41, 0x63, 0x74, 0x5D, 0x20,
+ 0x3D, 0x20, 0x30, 0x78, 0x32, 0x00, 0x5B, 0x31,
+ 0x70, 0x0A, 0x04, 0x41, 0x30, 0x32, 0x32, 0x70,
+ 0x0D, 0x20, 0x46, 0x34, 0x78, 0x32, 0x31, 0x30,
+ 0x5B, 0x58, 0x43, 0x36, 0x4D, 0x6F, 0x6E, 0x69,
+ 0x74, 0x6F, 0x72, 0x54, 0x68, 0x72, 0x65, 0x73,
+ 0x68, 0x5D, 0x20, 0x3D, 0x20, 0x30, 0x78, 0x34,
+ 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x0F, 0x41, 0x30,
+ 0x32, 0x33, 0x70, 0x0D, 0x20, 0x46, 0x33, 0x78,
+ 0x44, 0x43, 0x5B, 0x43, 0x61, 0x63, 0x68, 0x65,
+ 0x46, 0x6C, 0x75, 0x73, 0x68, 0x4F, 0x6E, 0x48,
+ 0x61, 0x6C, 0x74, 0x54, 0x6D, 0x72, 0x5D, 0x20,
+ 0x3D, 0x20, 0x30, 0x78, 0x46, 0x00, 0x5B, 0x31,
+ 0xA1, 0x41, 0x0B, 0x70, 0x0A, 0x3C, 0x41, 0x30,
+ 0x32, 0x30, 0x70, 0x0D, 0x20, 0x46, 0x34, 0x78,
+ 0x31, 0x32, 0x38, 0x5B, 0x43, 0x61, 0x63, 0x68,
+ 0x65, 0x46, 0x6C, 0x75, 0x73, 0x68, 0x54, 0x6D,
+ 0x72, 0x5D, 0x20, 0x3D, 0x20, 0x30, 0x78, 0x33,
+ 0x43, 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x01, 0x41,
+ 0x30, 0x32, 0x31, 0x70, 0x0D, 0x20, 0x46, 0x34,
+ 0x78, 0x32, 0x31, 0x30, 0x5B, 0x58, 0x43, 0x36,
+ 0x4D, 0x6F, 0x6E, 0x4D, 0x69, 0x73, 0x70, 0x72,
+ 0x65, 0x64, 0x69, 0x63, 0x74, 0x41, 0x63, 0x74,
+ 0x5D, 0x20, 0x3D, 0x20, 0x30, 0x78, 0x31, 0x00,
+ 0x5B, 0x31, 0x70, 0x0A, 0x02, 0x41, 0x30, 0x32,
+ 0x32, 0x70, 0x0D, 0x20, 0x46, 0x34, 0x78, 0x32,
+ 0x31, 0x30, 0x5B, 0x58, 0x43, 0x36, 0x4D, 0x6F,
+ 0x6E, 0x69, 0x74, 0x6F, 0x72, 0x54, 0x68, 0x72,
+ 0x65, 0x73, 0x68, 0x5D, 0x20, 0x3D, 0x20, 0x30,
+ 0x78, 0x32, 0x00, 0x5B, 0x31, 0x70, 0x0A, 0x04,
+ 0x41, 0x30, 0x32, 0x33, 0x70, 0x0D, 0x20, 0x46,
+ 0x33, 0x78, 0x44, 0x43, 0x5B, 0x43, 0x61, 0x63,
+ 0x68, 0x65, 0x46, 0x6C, 0x75, 0x73, 0x68, 0x4F,
+ 0x6E, 0x48, 0x61, 0x6C, 0x74, 0x54, 0x6D, 0x72,
+ 0x5D, 0x20, 0x3D, 0x20, 0x30, 0x78, 0x34, 0x00,
+ 0x5B, 0x31, 0x14, 0x4E, 0x05, 0x41, 0x30, 0x31,
+ 0x35, 0x01, 0xA0, 0x18, 0x93, 0x41, 0x30, 0x31,
+ 0x38, 0x0A, 0x00, 0x70, 0x41, 0x30, 0x32, 0x34,
+ 0x41, 0x30, 0x31, 0x39, 0x70, 0x0A, 0x01, 0x41,
+ 0x30, 0x31, 0x38, 0xA0, 0x3D, 0x93, 0x41, 0x30,
+ 0x31, 0x39, 0x0A, 0x01, 0xA0, 0x1C, 0x93, 0x68,
+ 0x0A, 0x00, 0x70, 0x0A, 0x00, 0x41, 0x30, 0x32,
+ 0x34, 0x70, 0x0D, 0x20, 0x41, 0x50, 0x4D, 0x20,
+ 0x4F, 0x46, 0x46, 0x21, 0x21, 0x21, 0x00, 0x5B,
+ 0x31, 0xA1, 0x17, 0x70, 0x0A, 0x01, 0x41, 0x30,
+ 0x32, 0x34, 0x70, 0x0D, 0x20, 0x41, 0x50, 0x4D,
+ 0x20, 0x4F, 0x4E, 0x21, 0x21, 0x21, 0x00, 0x5B,
+ 0x31, 0x14, 0x40, 0x0C, 0x41, 0x30, 0x31, 0x33,
+ 0x02, 0xA0, 0x3D, 0x93, 0x69, 0x0A, 0x00, 0x70,
+ 0x0D, 0x20, 0x4C, 0x43, 0x4C, 0x4B, 0x20, 0x44,
+ 0x50, 0x4D, 0x20, 0x53, 0x74, 0x61, 0x74, 0x65,
+ 0x20, 0x30, 0x20, 0x5B, 0x4F, 0x46, 0x46, 0x5D,
+ 0x2C, 0x20, 0x53, 0x74, 0x61, 0x74, 0x65, 0x20,
+ 0x35, 0x20, 0x5B, 0x4F, 0x4E, 0x5D, 0x2C, 0x20,
+ 0x53, 0x74, 0x61, 0x74, 0x65, 0x20, 0x36, 0x20,
+ 0x5B, 0x4F, 0x4E, 0x5D, 0x00, 0x5B, 0x31, 0xA1,
+ 0x4A, 0x07, 0xA0, 0x3D, 0x93, 0x68, 0x0A, 0x01,
+ 0x70, 0x0D, 0x20, 0x4C, 0x43, 0x4C, 0x4B, 0x20,
+ 0x44, 0x50, 0x4D, 0x20, 0x53, 0x74, 0x61, 0x74,
+ 0x65, 0x20, 0x30, 0x20, 0x5B, 0x4F, 0x4E, 0x5D,
+ 0x2C, 0x20, 0x53, 0x74, 0x61, 0x74, 0x65, 0x20,
+ 0x35, 0x20, 0x5B, 0x4F, 0x4E, 0x5D, 0x2C, 0x20,
+ 0x53, 0x74, 0x61, 0x74, 0x65, 0x20, 0x36, 0x20,
+ 0x5B, 0x4F, 0x46, 0x46, 0x5D, 0x00, 0x5B, 0x31,
+ 0xA1, 0x39, 0x70, 0x0D, 0x20, 0x4C, 0x43, 0x4C,
+ 0x4B, 0x20, 0x44, 0x50, 0x4D, 0x20, 0x53, 0x74,
+ 0x61, 0x74, 0x65, 0x20, 0x30, 0x20, 0x5B, 0x4F,
+ 0x4E, 0x5D, 0x2C, 0x20, 0x53, 0x74, 0x61, 0x74,
+ 0x65, 0x20, 0x35, 0x20, 0x5B, 0x4F, 0x46, 0x46,
+ 0x5D, 0x2C, 0x20, 0x53, 0x74, 0x61, 0x74, 0x65,
+ 0x20, 0x36, 0x20, 0x5B, 0x4F, 0x4E, 0x5D, 0x00,
+ 0x5B, 0x31
+};
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxEnvInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxEnvInitKB.c
new file mode 100644
index 0000000..f0cbd18
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxEnvInitKB.c
@@ -0,0 +1,229 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GFX env post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 86586 $ @e \$Date: 2013-01-23 12:45:26 -0600 (Wed, 23 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbTable.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "GnbGfxInitLibV1.h"
+#include "GnbGfxConfig.h"
+#include "GnbGfxFamServices.h"
+#include "GfxLibKB.h"
+#include "GfxLibV3.h"
+#include "GnbRegistersKB.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbHandleLib.h"
+#include "cpuFamilyTranslation.h"
+#include "OptionGnb.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GFXENVINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern GNB_TABLE ROMDATA GfxEnvInitTableKB[];
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+GfxEnvInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize GFX straps.
+ *
+ *
+ * @param[in] Gfx Pointer to global GFX configuration
+ * @retval AGESA_STATUS
+ */
+
+STATIC AGESA_STATUS
+GfxStrapsEnvInitKB (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ D0F0xD4_x010914E1_STRUCT D0F0xD4_x10914E1;
+ D0F0xD4_x010914E2_STRUCT D0F0xD4_x10914E2;
+ D0F0xD4_x01091507_STRUCT D0F0xD4_x1091507;
+ D0F0x64_x1D_STRUCT D0F0x64_x1D;
+ UINT32 D0F0xD4_x010914C3;
+ GNB_HANDLE *GnbHandle;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxStrapsEnvInitKB Enter\n");
+
+ GnbHandle = GnbGetHandle (GnbLibGetHeader (Gfx));
+
+ GnbRegisterReadKB (GnbHandle, D0F0xD4_x010914E1_TYPE, D0F0xD4_x010914E1_ADDRESS, &D0F0xD4_x10914E1.Value, 0, GnbLibGetHeader (Gfx));
+ GnbRegisterReadKB (GnbHandle, D0F0xD4_x010914E2_TYPE, D0F0xD4_x010914E2_ADDRESS, &D0F0xD4_x10914E2.Value, 0, GnbLibGetHeader (Gfx));
+ GnbRegisterReadKB (GnbHandle, D0F0xD4_x01091507_TYPE, D0F0xD4_x01091507_ADDRESS, &D0F0xD4_x1091507.Value, 0, GnbLibGetHeader (Gfx));
+ GnbRegisterReadKB (GnbHandle, D0F0xD4_x010914C3_TYPE, D0F0xD4_x010914C3_ADDRESS, &D0F0xD4_x010914C3, 0, GnbLibGetHeader (Gfx));
+
+ GnbLibPciIndirectRead (
+ GNB_SBDFO | D0F0x60_ADDRESS,
+ D0F0x64_x1D_ADDRESS | IOC_WRITE_ENABLE,
+ AccessWidth32,
+ &D0F0x64_x1D.Value,
+ GnbLibGetHeader (Gfx)
+ );
+
+ D0F0x64_x1D.Field.VgaEn = 0x1;
+
+ D0F0xD4_x10914E2.Field.bita = 0x0;
+ D0F0xD4_x10914E2.Field.bita = 0x0;
+ D0F0xD4_x1091507.Field.bit16 = Gfx->GnbHdAudio;
+ D0F0xD4_x10914E2.Field.bit13 = Gfx->GnbHdAudio;
+
+ D0F0xD4_x10914E1.Field.StrapBifRegApSize = 0x2;
+ D0F0xD4_x10914E1.Field.StrapBifDoorbellBarDis = 0x0;
+ D0F0xD4_x10914E1.Field.Bitfield_13_13 = 0x0;
+ D0F0xD4_x10914E1.Field.Bitfield_15_14 = 0x3;
+
+ if (Gfx->UmaInfo.UmaSize > 128 * 0x100000) {
+ D0F0xD4_x10914E1.Field.StrapBifMemApSize = 0x1;
+ D0F0xD4_x1091507.Field.StrapBifMemApSizePin = 0x1;
+ } else if (Gfx->UmaInfo.UmaSize > 64 * 0x100000) {
+ D0F0xD4_x10914E1.Field.StrapBifMemApSize = 0x0;
+ D0F0xD4_x1091507.Field.StrapBifMemApSizePin = 0x0;
+ } else {
+ D0F0xD4_x10914E1.Field.StrapBifMemApSize = 0x2;
+ D0F0xD4_x1091507.Field.StrapBifMemApSizePin = 0x2;
+ }
+
+ GnbLibPciIndirectWrite (
+ GNB_SBDFO | D0F0x60_ADDRESS,
+ D0F0x64_x1D_ADDRESS | IOC_WRITE_ENABLE,
+ AccessS3SaveWidth32,
+ &D0F0x64_x1D.Value,
+ GnbLibGetHeader (Gfx)
+ );
+
+ D0F0xD4_x010914C3 |= BIT0;
+ GnbRegisterWriteKB (GnbHandle, D0F0xD4_x010914E1_TYPE, D0F0xD4_x010914E1_ADDRESS, &D0F0xD4_x10914E1.Value, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ GnbRegisterWriteKB (GnbHandle, D0F0xD4_x010914E2_TYPE, D0F0xD4_x010914E2_ADDRESS, &D0F0xD4_x10914E2.Value, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ GnbRegisterWriteKB (GnbHandle, D0F0xD4_x01091507_TYPE, D0F0xD4_x01091507_ADDRESS, &D0F0xD4_x1091507.Value, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ GnbRegisterWriteKB (GnbHandle, D0F0xD4_x010914C3_TYPE, D0F0xD4_x010914C3_ADDRESS, &D0F0xD4_x010914C3, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxStrapsEnvInitKB Exit\n");
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GFX at Env Post.
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+
+AGESA_STATUS
+GfxEnvInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ GFX_PLATFORM_CONFIG *Gfx;
+ GNB_HANDLE *GnbHandle;
+ UINT32 Property;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxEnvInterfaceKB Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+ Property = TABLE_PROPERTY_DEFAULT;
+
+ Status = GfxLocateConfigData (StdHeader, &Gfx);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_SUCCESS) {
+ if (Gfx->UmaInfo.UmaMode != UMA_NONE) {
+ // Power up iGPU
+ GfxRequestGPUPowerV3 (Gfx, 1);
+ Status = GfxStrapsEnvInitKB (Gfx);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+ } else {
+ GfxFmDisableController (StdHeader);
+ Property |= TABLE_PROPERTY_IGFX_DISABLED;
+ }
+ } else {
+ GfxFmDisableController (StdHeader);
+ Property |= TABLE_PROPERTY_IGFX_DISABLED;
+ }
+
+ GnbHandle = GnbGetHandle (StdHeader);
+ ASSERT (GnbHandle != NULL);
+ Status = GnbProcessTable (
+ GnbHandle,
+ GfxEnvInitTableKB,
+ Property,
+ GNB_TABLE_FLAGS_FORCE_S3_SAVE,
+ StdHeader
+ );
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxEnvInterfaceKB Exit [0x%x]\n", AgesaStatus);
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxGmcInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxGmcInitKB.c
new file mode 100644
index 0000000..234592b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxGmcInitKB.c
@@ -0,0 +1,375 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe late post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 87849 $ @e \$Date: 2013-02-11 15:37:58 -0600 (Mon, 11 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbCommonLib.h"
+#include "GnbTable.h"
+#include "GnbPcieConfig.h"
+#include "GnbRegisterAccKB.h"
+#include "cpuFamilyTranslation.h"
+#include "GnbRegistersKB.h"
+#include "GfxLibKB.h"
+#include "GfxGmcInitKB.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GFXGMCINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern GNB_TABLE ROMDATA GfxGmcFeature1DisableKB [];
+extern GNB_TABLE ROMDATA GfxGmcInitTableKB [];
+extern GNB_TABLE ROMDATA GfxGmcFeature1EnableKB [];
+
+
+#define GNB_GFX_DRAM_CH_0_PRESENT 1
+#define GNB_GFX_DRAM_CH_1_PRESENT 2
+
+#define DRAMTYPE_DDR3 1
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize Fb location
+ *
+ *
+ *
+ * @param[in] GnbHandle Pointer to GNB_HANDLE
+ * @param[in] Gfx Pointer to global GFX configuration
+ *
+ */
+STATIC VOID
+GfxGmcInitializeFbLocationKB (
+ IN GNB_HANDLE *GnbHandle,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT32 GMMx2024;
+ UINT32 GMMx2068;
+ UINT32 GMMx2C04;
+ UINT32 GMMx5428;
+ UINT64 FBBase;
+ UINT64 FBTop;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxGmcInitializeFbLocationKB Enter\n");
+
+ FBBase = 0x0F00000000;
+ FBTop = FBBase + Gfx->UmaInfo.UmaSize - 1;
+ GMMx2024 = 0;
+ GMMx2C04 = 0;
+ GMMx2024 |= (UINT16) (FBBase >> 24);
+ GMMx2024 |= (UINT32) ((FBTop >> 24) << 16);
+ GMMx2068 = (UINT32) (Gfx->UmaInfo.UmaBase >> 22);
+ GMMx2C04 = (UINT32) (FBBase >> 8);
+ GMMx5428 = Gfx->UmaInfo.UmaSize >> 20;
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x2024, &GMMx2024, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x2068, &GMMx2068, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x2C04, &GMMx2C04, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x5428, &GMMx5428, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxGmcInitializeFbLocationKB Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize sequencer model
+ *
+ *
+ *
+ * @param[in] GnbHandle Pointer to GNB_HANDLE
+ * @param[in] Gfx Pointer to global GFX configuration
+ *
+ */
+STATIC VOID
+GfxGmcInitializeHubAndCitfSteeringKB (
+ IN GNB_HANDLE *GnbHandle,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT32 GMMx2004;
+ UINT32 GMMx2008;
+
+ GMMx2004 = 0x2210;
+ GMMx2008 = 0;
+
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x2004, &GMMx2004, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x2008, &GMMx2008, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable Stutter Mode with/without power-gating
+ *
+ *
+ *
+ * @param[in] GnbHandle Pointer to GNB_HANDLE
+ * @param[in] Gfx Pointer to global GFX configuration
+ *
+ */
+STATIC VOID
+GfxGmcEnableStutterModePowerGatingKB (
+ IN GNB_HANDLE *GnbHandle,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT32 GMMx3508;
+ UINT32 GMMx350C;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxGmcEnableStutterModePowerGatingKB Enter\n");
+
+ GnbRegisterReadKB (GnbHandle, 0x12, 0x3508, &GMMx3508, 0, GnbLibGetHeader (Gfx));
+ GnbRegisterReadKB (GnbHandle, 0x12, 0x350C, &GMMx350C, 0, GnbLibGetHeader (Gfx));
+ if (Gfx->GmcPowerGating != GmcPowerGatingDisabled) {
+ // Enabling power gating
+ if (Gfx->GmcPowerGating == GmcPowerGatingWithStutter) {
+ GMMx3508 |= 1;
+ GMMx350C |= 1 << 11;
+ GMMx350C &= ~(1 << 16);
+ } else {
+ GMMx3508 &= ~1;
+ GMMx350C &= ~(1 << 11);
+ GMMx350C |= 1 << 16;
+ }
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x3508, &GMMx3508, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x350C, &GMMx350C, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ } else {
+ // Disabling power gating
+ GMMx3508 &= ~1;
+ GMMx350C &= ~(1 << 11);
+ GMMx350C &= ~(1 << 16);
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x3508, &GMMx3508, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x350C, &GMMx350C, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxGmcEnableStutterModePowerGatingKB Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *
+ *
+ * @param[in] GnbHandle Pointer to GNB_HANDLE
+ * @param[in] Gfx Pointer to global GFX configuration
+ */
+
+STATIC VOID
+GfxGmcSecureGarlicAccessKB (
+ IN GNB_HANDLE *GnbHandle,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT32 v1;
+ UINT32 v2;
+ UINT32 v3;
+
+ v1 = (UINT32) (Gfx->UmaInfo.UmaBase >> 20);
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x2868, &v1, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ v2 = (UINT32) (((Gfx->UmaInfo.UmaBase + Gfx->UmaInfo.UmaSize) >> 20) - 1);
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x286C, &v2, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ // Area FB - 32K reserved by VBIOS for SBIOS to use
+ v3 = (UINT32) ((Gfx->UmaInfo.UmaBase + Gfx->UmaInfo.UmaSize - 32 * 1024) >> 12);
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x2878, &v3, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize C6 aperture location
+ *
+ *
+ *
+ * @param[in] GnbHandle Pointer to GNB_HANDLE
+ * @param[in] Gfx Pointer to global GFX configuration
+ *
+ */
+STATIC VOID
+GfxGmcInitializeC6LocationKB (
+ IN GNB_HANDLE *GnbHandle,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ D18F2x118_STRUCT D18F2x118;
+ D18F1x44_STRUCT D18F1x44;
+ UINT32 GMMx2870;
+ UINT32 GMMx2874;
+
+ // Check C6 enable, D18F2x118[CC6SaveEn]
+ GnbRegisterReadKB (GnbHandle, D18F2x118_TYPE, D18F2x118_ADDRESS, &D18F2x118.Value, 0, GnbLibGetHeader (Gfx));
+
+ if (D18F2x118.Field.CC6SaveEn) {
+ // From D18F1x[144:140,44:40] DRAM Base/Limit,
+ // {DramBase[47:24], 00_0000h} <= address[47:0] <= {DramLimit[47:24], FF_FFFFh}.
+ GnbRegisterReadKB (GnbHandle, D18F1x44_TYPE, D18F1x44_ADDRESS, &D18F1x44.Value, 0, GnbLibGetHeader (Gfx));
+ //
+ // base 39:20, base = Dram Limit + 1
+ // ex: system 256 MB on Node 0, D18F1x44.Field.DramLimit_39_24_ = 0xE (240MB -1)
+ // Node DRAM D18F1x[144:140,44:40] CC6DRAMRange D18F4x128 D18F1x120 D18F1x124
+ // 0 256MB 0MB ~ 240 MB - 1 240 MB ~ 256 MB - 1 0 0 MB, 256 MB - 1
+ //
+
+ // base 39:20
+ GMMx2870 = ((D18F1x44.Field.DramLimit_39_24 + 1) << 4);
+ // top 39:20
+ GMMx2874 = (((D18F1x44.Field.DramLimit_39_24 + 1) << 24) + (16 * 0x100000) - 1) >> 20;
+
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x2870, &GMMx2870, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x2874, &GMMx2874, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize GMC
+ *
+ *
+ *
+ * @param[in] Gfx Pointer to global GFX configuration
+ *
+ */
+
+AGESA_STATUS
+GfxGmcInitKB (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT32 v1;
+ UINT32 GMMx25E8;
+ D18F3x44_STRUCT D18F3x44;
+ GNB_HANDLE *GnbHandle;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxGmcInitKB Enter\n");
+//2.1 Disable clock-gating
+ GnbHandle = GnbGetHandle (GnbLibGetHeader (Gfx));
+ ASSERT (GnbHandle != NULL);
+ GnbProcessTable (
+ GnbHandle,
+ GfxGmcFeature1DisableKB,
+ 0,
+ GNB_TABLE_FLAGS_FORCE_S3_SAVE,
+ GnbLibGetHeader (Gfx)
+ );
+//2.3 HUB & CITF channel steering
+ GfxGmcInitializeHubAndCitfSteeringKB (GnbHandle, Gfx);
+//2.6 Frame buffer location
+ GfxGmcInitializeFbLocationKB (GnbHandle, Gfx);
+//2.8 Securing GARLIC access
+//2.8.1 GARLIC request disable
+ GfxGmcSecureGarlicAccessKB (GnbHandle, Gfx);
+//2.8.2 C6 save aperture
+ GfxGmcInitializeC6LocationKB (GnbHandle, Gfx);
+//2.2 System memory address translation
+//2.4 Sequencer model programming
+//2.5 Power Gating - PGFSM and RENG init
+//2.7 Performance tuning
+//2.10 Display latency
+//2.11 Remove blackout
+ GnbProcessTable (
+ GnbHandle,
+ GfxGmcInitTableKB,
+ 0,
+ GNB_TABLE_FLAGS_FORCE_S3_SAVE,
+ GnbLibGetHeader (Gfx)
+ );
+//4. Power management
+ GnbProcessTable (
+ GnbHandle,
+ GfxGmcFeature1EnableKB,
+ 0,
+ GNB_TABLE_FLAGS_FORCE_S3_SAVE,
+ GnbLibGetHeader (Gfx)
+ );
+
+// SETUP or BLDCFG may override.
+ switch (Gfx->UmaSteering) {
+ case 0:
+ v1 = 0;
+ GnbRegisterReadKB (GnbHandle, D18F3x44_TYPE, D18F3x44_ADDRESS, &D18F3x44.Value, 0, GnbLibGetHeader (Gfx));
+ if (D18F3x44.Field.DramEccEn == 1) {
+ v1 = SystemTrafficOnion;
+ }
+ break;
+ case SystemTrafficOnion:
+ v1 = SystemTrafficOnion;
+ break;
+ case Onion:
+ v1 = Onion;
+ break;
+ case 3:
+ v1 = 3;
+ break;
+ default:
+ v1 = 0;
+ ASSERT (FALSE);
+ break;
+ }
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x206C, &v1, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+ IDS_OPTION_CALLOUT (IDS_CALLOUT_GNB_GMM_REGISTER_OVERRIDE, Gfx, GnbLibGetHeader (Gfx));
+
+ GnbRegisterReadKB (GnbHandle, 0x12, 0x25E8, &GMMx25E8, 0, GnbLibGetHeader (Gfx));
+ GMMx25E8 |= BIT14;
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x25E8, &GMMx25E8, GNB_REG_ACC_FLAG_S3SAVE, GnbLibGetHeader (Gfx));
+
+ if (Gfx->GmcPowerGating != GmcPowerGatingDisabled) {
+ //4.2 Enabling stutter mode with or without power-gating
+ GfxGmcEnableStutterModePowerGatingKB (GnbHandle, Gfx);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxGmcInitKB Exit\n");
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxGmcInitKB.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxGmcInitKB.h
new file mode 100644
index 0000000..a6b63ca
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxGmcInitKB.h
@@ -0,0 +1,55 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * various service procedures
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GFXGMCINITKB_H_
+#define _GFXGMCINITKB_H_
+
+#include "GnbRegistersKB.h"
+
+AGESA_STATUS
+GfxGmcInitKB (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxIntegratedInfoTableKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxIntegratedInfoTableKB.c
new file mode 100644
index 0000000..c81fd5ee
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxIntegratedInfoTableKB.c
@@ -0,0 +1,526 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Integrated table info init
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 87902 $ @e \$Date: 2013-02-12 15:59:48 -0600 (Tue, 12 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Gnb.h"
+#include "GnbF1Table.h"
+#include "GnbPcie.h"
+#include "GnbGfx.h"
+#include "GnbSbLib.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbGfxConfig.h"
+#include "GnbGfxInitLibV1.h"
+#include "GnbGfxFamServices.h"
+#include "GnbRegistersKB.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbNbInitLibV1.h"
+#include "GfxConfigLib.h"
+#include "GfxIntegratedInfoTable.h"
+#include "GfxPwrPlayTable.h"
+#include "GfxLibKB.h"
+#include "GfxLibV3.h"
+#include "OptionGnb.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GFXINTEGRATEDINFOTABLEKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+#define GFX_REFCLK 100 // (in MHz) Reference clock is 100 MHz
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GfxMapEngineToDisplayPathKB (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ OUT EXT_DISPLAY_PATH *DisplayPathList,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+AGESA_STATUS
+GfxIntInfoTableInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+CONST UINT8 DdiLaneConfigArrayKB [][4] = {
+ {8, 11, 0, 0},
+ {12, 15, 1, 1},
+ {11, 8, 0, 0},
+ {15, 12, 1, 1},
+ {16, 19, 6, 6},
+ {19, 16, 6, 6}
+};
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize display path for given engine
+ *
+ *
+ *
+ * @param[in] Engine Engine configuration info
+ * @param[out] DisplayPathList Display path list
+ * @param[in] Gfx Pointer to global GFX configuration
+ */
+
+AGESA_STATUS
+GfxMapEngineToDisplayPathKB (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ OUT EXT_DISPLAY_PATH *DisplayPathList,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ AGESA_STATUS Status;
+ UINT8 PrimaryDisplayPathId;
+ UINT8 SecondaryDisplayPathId;
+ UINTN DisplayPathIndex;
+ PrimaryDisplayPathId = 0xff;
+ SecondaryDisplayPathId = 0xff;
+ for (DisplayPathIndex = 0; DisplayPathIndex < (sizeof (DdiLaneConfigArrayKB) / 4); DisplayPathIndex++) {
+ if (DdiLaneConfigArrayKB[DisplayPathIndex][0] == Engine->EngineData.StartLane &&
+ DdiLaneConfigArrayKB[DisplayPathIndex][1] == Engine->EngineData.EndLane) {
+ PrimaryDisplayPathId = DdiLaneConfigArrayKB[DisplayPathIndex][2];
+ SecondaryDisplayPathId = DdiLaneConfigArrayKB[DisplayPathIndex][3];
+ break;
+ }
+ }
+
+ if (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeDualLinkDVI ||
+ (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeLvds && PrimaryDisplayPathId != 0)) {
+ // Display config invalid for KB
+ PrimaryDisplayPathId = 0xff;
+ }
+
+ if (PrimaryDisplayPathId != 0xff) {
+ ASSERT (Engine->Type.Ddi.DdiData.AuxIndex <= Aux3);
+ IDS_HDT_CONSOLE (GFX_MISC, " Allocate Display Connector at Primary sPath[%d]\n", PrimaryDisplayPathId);
+ Engine->InitStatus |= INIT_STATUS_DDI_ACTIVE;
+ GfxIntegratedCopyDisplayInfo (
+ Engine,
+ &DisplayPathList[PrimaryDisplayPathId],
+ (PrimaryDisplayPathId != SecondaryDisplayPathId) ? &DisplayPathList[SecondaryDisplayPathId] : NULL,
+ Gfx
+ );
+
+ if (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeSingleLinkDviI) {
+ LibAmdMemCopy (&DisplayPathList[6], &DisplayPathList[PrimaryDisplayPathId], sizeof (EXT_DISPLAY_PATH), GnbLibGetHeader (Gfx));
+ DisplayPathList[6].usDeviceACPIEnum = 0x100;
+ DisplayPathList[6].usDeviceTag = ATOM_DEVICE_CRT1_SUPPORT;
+ }
+
+ Status = AGESA_SUCCESS;
+ } else {
+ IDS_HDT_CONSOLE (GFX_MISC, " Error!!! Map DDI lanes %d - %d to display path failed\n",
+ Engine->EngineData.StartLane,
+ Engine->EngineData.EndLane
+ );
+ PutEventLog (
+ AGESA_ERROR,
+ GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION,
+ Engine->EngineData.StartLane,
+ Engine->EngineData.EndLane,
+ 0,
+ 0,
+ GnbLibGetHeader (Gfx)
+ );
+ Status = AGESA_ERROR;
+ }
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *Init KB Nb p-State MemclkFreq
+ *
+ *
+ * @param[in] IntegratedInfoTable Integrated info table pointer
+ * @param[in] Gfx Gfx configuration info
+ */
+
+STATIC VOID
+GfxFillNbPstateMemclkFreqKB (
+ IN OUT ATOM_INTEGRATED_SYSTEM_INFO_V1_8 *IntegratedInfoTable,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ D18F2x94_dct0_STRUCT D18F2x94;
+ D18F2x2E0_dct0_STRUCT D18F2x2E0;
+ D18F5x160_STRUCT NbPstate;
+ UINT8 i;
+ ULONG memps0_freq;
+ ULONG memps1_freq;
+ UINT8 last_valid_pstate;
+ GNB_HANDLE *GnbHandle;
+
+ GnbHandle = GnbGetHandle (GnbLibGetHeader (Gfx));
+ ASSERT (GnbHandle != NULL);
+
+ GnbRegisterReadKB (
+ GnbHandle,
+ D18F2x94_dct0_TYPE,
+ D18F2x94_dct0_ADDRESS,
+ &D18F2x94.Value,
+ 0,
+ GnbLibGetHeader (Gfx)
+ );
+
+ GnbRegisterReadKB (
+ GnbHandle,
+ D18F2x2E0_dct0_TYPE,
+ D18F2x2E0_dct0_ADDRESS,
+ &D18F2x2E0.Value,
+ 0,
+ GnbLibGetHeader (Gfx)
+ );
+
+ memps0_freq = 100 * GfxLibExtractDramFrequencyV3 ((UINT8) D18F2x94.Field.MemClkFreq, GnbLibGetHeader (Gfx));
+ memps1_freq = 100 * GfxLibExtractDramFrequencyV3 ((UINT8) D18F2x2E0.Field.M1MemClkFreq, GnbLibGetHeader (Gfx));
+
+ last_valid_pstate = 0;
+ for (i = 0; i < 4; i++) {
+ NbPstate.Value = 0;
+ GnbRegisterReadKB (
+ GnbHandle,
+ TYPE_D18F5,
+ (D18F5x160_ADDRESS + (i * 4)),
+ &NbPstate.Value,
+ 0,
+ GnbLibGetHeader (Gfx)
+ );
+ if (NbPstate.Field.NbPstateEn == 1) {
+ last_valid_pstate = i;
+ IntegratedInfoTable->ulNbpStateMemclkFreq[i] = (NbPstate.Field.MemPstate == 0) ? memps0_freq : memps1_freq;
+ } else {
+ IntegratedInfoTable->ulNbpStateMemclkFreq[i] =
+ IntegratedInfoTable->ulNbpStateMemclkFreq[last_valid_pstate];
+ }
+ }
+
+ for (i = 0; i < 4; i++) {
+ IDS_HDT_CONSOLE (GNB_TRACE, " Nclk[%d] = %08x\n", i, IntegratedInfoTable->ulNbpStateNClkFreq[i]);
+ IDS_HDT_CONSOLE (GNB_TRACE, " Mclk[%d] = %08x\n", i, IntegratedInfoTable->ulNbpStateMemclkFreq[i]);
+ }
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *Calculate ulGMCRestoreResetTime
+ *
+ *
+ * @param[in] IntegratedInfoTable Integrated info table pointer
+ * @param[in] Gfx Gfx configuration info
+ * @param[in] PpF1Array
+ * @retval AGESA_STATUS
+ */
+///@todo - this is currently based on TN
+STATIC AGESA_STATUS
+GfxCalculateRestoreResetTimeKB (
+ IN ATOM_INTEGRATED_SYSTEM_INFO_V1_8 *IntegratedInfoTable,
+ IN GFX_PLATFORM_CONFIG *Gfx,
+ IN PP_F1_ARRAY_V2 *PpF1Array
+ )
+{
+ UINT8 MaxDid;
+ ULONG FreqSclk;
+ UINTN Index;
+ UINT32 TSclk;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxCalculateRestoreResetTimeKB Enter\n");
+ MaxDid = PpF1Array->PP_FUSE_ARRAY_V2_fld3;
+ for (Index = 0; Index < 4; Index++) {
+ MaxDid = MAX (MaxDid, PpF1Array->PP_FUSE_ARRAY_V2_fld33[Index]);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "MaxDid = %d\n", MaxDid);
+ FreqSclk = GfxFmCalculateClock (MaxDid, GnbLibGetHeader (Gfx));
+ // FreqSclk is in 10KHz units - need calculations in nS
+ // For accuracy, do calculations in .01nS, then convert at the end
+ TSclk = (100 * (1000000000 / 10000)) / FreqSclk;
+
+ IntegratedInfoTable->ulGMCRestoreResetTime = ((TSclk * 662) + 99) / 100;
+ IDS_HDT_CONSOLE (GNB_TRACE, "ulGMCRestoreResetTime = %d\n", IntegratedInfoTable->ulGMCRestoreResetTime);
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxCalculateRestoreResetTimeKB Exit\n");
+
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *Init KB HTC Data
+ *
+ *
+ * @param[in] IntegratedInfoTable Integrated info table pointer
+ * @param[in] Gfx Gfx configuration info
+ */
+
+STATIC VOID
+GfxFillHtcDataKB (
+ IN OUT ATOM_INTEGRATED_SYSTEM_INFO_V1_8 *IntegratedInfoTable,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ D18F3x64_STRUCT D18F3x64;
+ GNB_HANDLE *GnbHandle;
+
+ GnbHandle = GnbGetHandle (GnbLibGetHeader (Gfx));
+ ASSERT (GnbHandle != NULL);
+
+ GnbRegisterReadKB (
+ GnbHandle,
+ D18F3x64_TYPE,
+ D18F3x64_ADDRESS,
+ &D18F3x64.Value,
+ 0,
+ GnbLibGetHeader (Gfx)
+ );
+
+ if (D18F3x64.Field.HtcEn == 1) {
+ IntegratedInfoTable->ucHtcTmpLmt = (UCHAR) (D18F3x64.Field.HtcTmpLmt / 2 + 52);
+ IntegratedInfoTable->ATOM_INTEGRATED_SYSTEM_INFO_V1_8_fld11 = (UCHAR) (D18F3x64.Field.HtcHystLmt / 2);
+ } else {
+ IntegratedInfoTable->ucHtcTmpLmt = 0;
+ IntegratedInfoTable->ATOM_INTEGRATED_SYSTEM_INFO_V1_8_fld11 = 0;
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *Init Sclk <-> VID table
+ *
+ *
+ * @param[in] PpF1Array
+ * @param[in] IntegratedInfoTable Integrated info table pointer
+ * @param[in] Gfx Gfx configuration info
+ */
+
+STATIC VOID
+GfxIntInfoTableInitSclkTableKB (
+ IN PP_F1_ARRAY_V2 *PpF1Array,
+ IN ATOM_INTEGRATED_SYSTEM_INFO_V1_8 *IntegratedInfoTable,
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT8 Index;
+ UINTN AvailSclkIndex;
+ GnbGfx275_STRUCT *AvailSclkList;
+ BOOLEAN Sorting;
+ AvailSclkList = &IntegratedInfoTable->ATOM_INTEGRATED_SYSTEM_INFO_V1_8[0];
+
+ AvailSclkIndex = 0;
+ for (Index = 0; Index < 5; Index++) {
+ if (PpF1Array->PP_FUSE_ARRAY_V2_fld33[Index] != 0) {
+ AvailSclkList[AvailSclkIndex].GnbGfx275_STRUCT_fld0 = GfxFmCalculateClock (PpF1Array->PP_FUSE_ARRAY_V2_fld33[Index], GnbLibGetHeader (Gfx));
+ AvailSclkList[AvailSclkIndex].GnbGfx275_STRUCT_fld1 = Index;
+ AvailSclkList[AvailSclkIndex].GnbGfx275_STRUCT_fld2 = PpF1Array->PP_FUSE_ARRAY_V2_fld32[Index];
+ AvailSclkIndex++;
+ }
+ }
+ //Sort by VoltageIndex & GnbGfx275_STRUCT_fld0
+ if (AvailSclkIndex > 1) {
+ do {
+ Sorting = FALSE;
+ for (Index = 0; Index < (AvailSclkIndex - 1); Index++) {
+ GnbGfx275_STRUCT Temp;
+ BOOLEAN Exchange;
+ Exchange = FALSE;
+ if (AvailSclkList[Index].GnbGfx275_STRUCT_fld1 > AvailSclkList[Index + 1].GnbGfx275_STRUCT_fld1) {
+ Exchange = TRUE;
+ }
+ if ((AvailSclkList[Index].GnbGfx275_STRUCT_fld1 == AvailSclkList[Index + 1].GnbGfx275_STRUCT_fld1) &&
+ (AvailSclkList[Index].GnbGfx275_STRUCT_fld0 > AvailSclkList[Index + 1].GnbGfx275_STRUCT_fld0)) {
+ Exchange = TRUE;
+ }
+ if (Exchange) {
+ Sorting = TRUE;
+ LibAmdMemCopy (&Temp, &AvailSclkList[Index], sizeof (GnbGfx275_STRUCT), GnbLibGetHeader (Gfx));
+ LibAmdMemCopy (&AvailSclkList[Index], &AvailSclkList[Index + 1], sizeof (GnbGfx275_STRUCT), GnbLibGetHeader (Gfx));
+ LibAmdMemCopy (&AvailSclkList[Index + 1], &Temp, sizeof (GnbGfx275_STRUCT), GnbLibGetHeader (Gfx));
+ }
+ }
+ } while (Sorting);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Build integrated info table
+ *
+ *
+ *
+ * @param[in] Gfx Gfx configuration info
+ * @retval AGESA_STATUS
+ */
+AGESA_STATUS
+STATIC
+GfxIntInfoTableInitKB (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ ATOM_FUSION_SYSTEM_INFO_V3 SystemInfoTableV3;
+ PP_F1_ARRAY_V2 *PpF1Array;
+ ATOM_PPLIB_POWERPLAYTABLE4 *PpTable;
+ D18F5x170_STRUCT D18F5x170;
+ GNB_HANDLE *GnbHandle;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntInfoTableInitKB Enter\n");
+
+ AgesaStatus = AGESA_SUCCESS;
+ GnbHandle = GnbGetHandle (GnbLibGetHeader (Gfx));
+ ASSERT (GnbHandle != NULL);
+ PpF1Array = GnbLocateHeapBuffer (AMD_PP_F1_TABLE_HANDLE, GnbLibGetHeader (Gfx));
+ if (PpF1Array != NULL) {
+ LibAmdMemFill (&SystemInfoTableV3, 0x00, sizeof (ATOM_FUSION_SYSTEM_INFO_V3), GnbLibGetHeader (Gfx));
+
+ // Use common initialization first
+ Status = GfxIntInfoTableInitV3 (Gfx, &SystemInfoTableV3, PpF1Array);
+ // Complete table with KB-specific fields
+
+ // Build PP table
+ PpTable = (ATOM_PPLIB_POWERPLAYTABLE4*) &SystemInfoTableV3.ulPowerplayTable;
+ Status = GfxPwrPlayBuildTable (PpTable, Gfx);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "KB Pplay done\n");
+
+ // Assign usFormatID to 0x0013 to represent Kabini
+ PpTable->usFormatID = 0x13;
+
+ // Build Sclk info table
+ GfxIntInfoTableInitSclkTableKB (PpF1Array, &SystemInfoTableV3.sIntegratedSysInfo, Gfx);
+
+ // Fill in Nb P-state MemclkFreq Data
+ GfxFillNbPstateMemclkFreqKB (&SystemInfoTableV3.sIntegratedSysInfo, Gfx);
+ // Fill in HTC Data
+ GfxFillHtcDataKB (&SystemInfoTableV3.sIntegratedSysInfo, Gfx);
+
+ // Family specific data update
+ // Determine ulGMCRestoreResetTime
+ Status = GfxCalculateRestoreResetTimeKB (&SystemInfoTableV3.sIntegratedSysInfo, Gfx, PpF1Array);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ //GfxFmIntegratedInfoTableInit (&SystemInfoV1Table.sIntegratedSysInfo, Gfx);
+ SystemInfoTableV3.sIntegratedSysInfo.ulDDR_DLL_PowerUpTime = 4940;
+ SystemInfoTableV3.sIntegratedSysInfo.ulDDR_PLL_PowerUpTime = 2000;
+
+ SystemInfoTableV3.sIntegratedSysInfo.ulGPUCapInfo =
+ GPUCAPINFO_TMDS_HDMI_USE_SINGLE_PLL_MODE |
+ GPUCAPINFO_DP_USE_SINGLE_PLL_MODE |
+ GPUCAPINFO_DFS_BYPASS_DISABLE;
+
+ // GPUCAPINFO_DFS_BYPASS_ENABLE should be enabled by default for MOBILE systems
+ if ((Gfx->AmdPlatformType & AMD_PLATFORM_MOBILE) != 0) {
+ SystemInfoTableV3.sIntegratedSysInfo.ulGPUCapInfo |= GPUCAPINFO_DFS_BYPASS_ENABLE;
+ }
+
+ // Check if NbPstate enable
+ GnbRegisterReadKB (GnbHandle, TYPE_D18F5, D18F5x170_ADDRESS, &D18F5x170.Value, 0, GnbLibGetHeader (Gfx));
+ if ((D18F5x170.Field.SwNbPstateLoDis != 1) && (D18F5x170.Field.NbPstateMaxVal != 0)) {
+ // If NbPstate enable, then enable NBDPM for driver
+ SystemInfoTableV3.sIntegratedSysInfo.ulSystemConfig |= BIT3;
+ }
+
+ IDS_OPTION_CALLOUT (IDS_CALLOUT_GNB_INTEGRATED_TABLE_CONFIG, &SystemInfoTableV3.sIntegratedSysInfo, GnbLibGetHeader (Gfx));
+ //Copy integrated info table to Frame Buffer. (Do not use LibAmdMemCopy, routine not guaranteed access to above 4G memory in 32 bit mode.)
+ GfxIntInfoTablePostToFbV3 (&SystemInfoTableV3, Gfx);
+
+ GNB_DEBUG_CODE (
+ GfxIntInfoTableDebugDumpV3 (&SystemInfoTableV3, Gfx);
+ );
+ } else {
+ Status = AGESA_ERROR;
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ }
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntInfoTableInitKB Exit [0x%x]\n", Status);
+ return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Build integrated info table
+ * GMC FB access requred
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+AGESA_STATUS
+GfxIntInfoTableInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS Status;
+ GFX_PLATFORM_CONFIG *Gfx;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntInfoTableInterfaceKB Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+ if (GfxLibIsControllerPresent (StdHeader)) {
+ Status = GfxLocateConfigData (StdHeader, &Gfx);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status != AGESA_FATAL) {
+ Status = GfxIntInfoTableInitKB (Gfx);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxIntInfoTableInterfaceKB Exit[0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxLibKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxLibKB.c
new file mode 100644
index 0000000..7523736
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxLibKB.c
@@ -0,0 +1,192 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Family specific GFX library
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85947 $ @e \$Date: 2013-01-14 17:25:21 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "S3SaveState.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbGfx.h"
+#include "GfxLibKB.h"
+#include "GnbCommonLib.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbRegistersKB.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GFXLIBKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GfxDisableControllerKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+GfxCalculateClockKB (
+ IN UINT8 Did,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+GfxIsVbiosPostedKB (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Disable GFX controller
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GfxDisableControllerKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GnbLibPciRMW (
+ MAKE_SBDFO (0, 0, 0, 0,D0F0x7C_ADDRESS),
+ AccessS3SaveWidth32,
+ 0xffffffff,
+ 1 << D0F0x7C_ForceIntGfxDisable_OFFSET,
+ StdHeader
+ );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get system PLL COF
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval System PLL COF
+ */
+UINT32
+GfxLibGetSystemPllCofKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 v0;
+ GnbRegisterReadKB (GnbGetHandle (StdHeader), 0x4, 0xC0500000, &v0, 0, StdHeader);
+ return 100 * (((v0 >> 1) & 0x3F) + 0x10);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Calculate COF for DFS out of Main PLL
+ *
+ *
+ *
+ * @param[in] Did Did
+ * @param[in] StdHeader Standard Configuration Header
+ * @retval COF in 10khz
+ */
+
+UINT32
+GfxCalculateClockKB (
+ IN UINT8 Did,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Divider;
+ UINT32 SystemPllCof;
+ SystemPllCof = GfxLibGetSystemPllCofKB (StdHeader) * 100;
+ if (Did >= 8 && Did <= 0x3F) {
+ Divider = Did * 25;
+ } else if (Did > 0x3F && Did <= 0x5F) {
+ Divider = (Did - 64) * 50 + 1600;
+ } else if (Did > 0x5F && Did <= 0x7E) {
+ Divider = (Did - 96) * 100 + 3200;
+ } else if (Did == 0x7f) {
+ Divider = 128 * 100;
+ } else {
+ ASSERT (FALSE);
+ return 200 * 100;
+ }
+ ASSERT (Divider != 0);
+ return (((SystemPllCof * 100) + (Divider - 1)) / Divider);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if Video BIOS has posted or not
+ *
+ *
+ * @param[in] Gfx Pointer to global GFX configuration
+ */
+
+BOOLEAN
+GfxIsVbiosPostedKB (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT32 D0F0xBC_xC0200000;
+ GnbRegisterReadKB (GnbGetHandle (GnbLibGetHeader (Gfx)), 0x4, 0xC0200000, &D0F0xBC_xC0200000, 0, GnbLibGetHeader (Gfx));
+
+ return (((D0F0xBC_xC0200000 >> 16) & 1) == 0) ? TRUE : FALSE;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxLibKB.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxLibKB.h
new file mode 100644
index 0000000..117a794
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxLibKB.h
@@ -0,0 +1,53 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Various GFX service procedures
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85947 $ @e \$Date: 2013-01-14 17:25:21 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GFXLIBKB_H_
+#define _GFXLIBKB_H_
+
+UINT32
+GfxLibGetSystemPllCofKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxMidInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxMidInitKB.c
new file mode 100644
index 0000000..b6cfe66
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxMidInitKB.c
@@ -0,0 +1,161 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GFX mid post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 88282 $ @e \$Date: 2013-02-19 11:20:56 -0600 (Tue, 19 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbGfxConfig.h"
+#include "GnbGfxInitLibV1.h"
+#include "GnbNbInitLibV1.h"
+#include "GnbNbInitLibV5.h"
+#include "GnbGfxFamServices.h"
+#include "GfxGmcInitKB.h"
+#include "GfxLibKB.h"
+#include "GfxLibV3.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbRegistersKB.h"
+#include "PcieConfigData.h"
+#include "PcieConfigLib.h"
+#include "cpuFamilyTranslation.h"
+#include "GfxSamuInitKB.h"
+#include "GnbHandleLib.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GFXMIDINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GfxMidInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GFX at Mid Post.
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GfxMidInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ GFX_PLATFORM_CONFIG *Gfx;
+ UINT8 AudioEPCount;
+ UINT32 GMMx5F50;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxMidInterfaceKB Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+ Status = GfxLocateConfigData (StdHeader, &Gfx);
+ ASSERT (Status == AGESA_SUCCESS);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_FATAL) {
+ GfxFmDisableController (StdHeader);
+ } else {
+ if (Gfx->UmaInfo.UmaMode != UMA_NONE) {
+ Status = GfxEnableGmmAccessV3 (Gfx);
+ ASSERT (Status == AGESA_SUCCESS);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status != AGESA_SUCCESS) {
+ // Can not initialize GMM registers going to disable GFX controller
+ IDS_HDT_CONSOLE (GNB_TRACE, " Fail to establish GMM access\n");
+ Gfx->UmaInfo.UmaMode = UMA_NONE;
+ GfxFmDisableController (StdHeader);
+ } else {
+ Status = GfxGmcInitKB (Gfx);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ //Status = GfxSamuInit (Gfx);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ Status = GfxInitSsid (Gfx);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ AudioEPCount = 0;
+ Status = GfxIntAudioEPEnumV3 (Gfx, &AudioEPCount);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ if (AudioEPCount > 2) {
+ AudioEPCount = 2;
+ }
+
+ AudioEPCount = 7 - AudioEPCount;
+ GnbRegisterReadKB (GnbGetHandle (StdHeader), 0x12, 0x5F50, &GMMx5F50, 0, StdHeader);
+ GMMx5F50 &= ~7; GMMx5F50 |= AudioEPCount & 7;
+ GMMx5F50 |= 1 << 4;
+ GnbRegisterWriteKB (GnbGetHandle (StdHeader), 0x12, 0x5F50, &GMMx5F50, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+ }
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxMidInterfaceKB Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxPostInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxPostInitKB.c
new file mode 100644
index 0000000..fa70f37
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxPostInitKB.c
@@ -0,0 +1,153 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe late post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "GnbGfx.h"
+#include "GnbGfxConfig.h"
+#include "GnbF1Table.h"
+#include "GnbGfxInitLibV1.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbRegistersKB.h"
+#include "GnbHandleLib.h"
+#include "GfxLibV3.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GFXPOSTINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GfxPostInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init GFX at Post.
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+
+AGESA_STATUS
+GfxPostInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AMD_POST_PARAMS *PostParamsPtr;
+ GFX_CARD_CARD_INFO GfxDiscreteCardInfo;
+ AGESA_STATUS Status;
+ GFX_PLATFORM_CONFIG *Gfx;
+ UINT32 D0F0xBC_xC00C0000;
+ GnbRegistersKB7269_STRUCT var5;
+ GnbRegistersKB7314_STRUCT var6;
+ GNB_HANDLE *GnbHandle;
+
+ PostParamsPtr = (AMD_POST_PARAMS *)StdHeader;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxPostInterfaceKB Enter\n");
+ GnbHandle = GnbGetHandle (StdHeader);
+ ASSERT (GnbHandle != NULL);
+ GnbRegisterReadKB (GnbHandle, 0x4,
+ 0xc00c0000, &D0F0xBC_xC00C0000, 0, StdHeader);
+ Status = GfxLocateConfigData (StdHeader, &Gfx);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ if (((D0F0xBC_xC00C0000 >> 1) & 1) != 1) {
+ if (PostParamsPtr->MemConfig.UmaMode != UMA_NONE) {
+ LibAmdMemFill (&GfxDiscreteCardInfo, 0x0, sizeof (GfxDiscreteCardInfo), StdHeader);
+ GfxGetDiscreteCardInfo (&GfxDiscreteCardInfo, StdHeader);
+ if (((GfxDiscreteCardInfo.PciGfxCardBitmap != 0) ||
+ (GfxDiscreteCardInfo.AmdPcieGfxCardBitmap != GfxDiscreteCardInfo.PcieGfxCardBitmap)) ||
+ ((PostParamsPtr->GnbPostConfig.IgpuEnableDisablePolicy == IGPU_DISABLE_ANY_PCIE) &&
+ ((GfxDiscreteCardInfo.PciGfxCardBitmap != 0) || (GfxDiscreteCardInfo.PcieGfxCardBitmap != 0)))) {
+ PostParamsPtr->MemConfig.UmaMode = UMA_NONE;
+ IDS_HDT_CONSOLE (GFX_MISC, " GfxDisabled due dGPU policy\n");
+ }
+ }
+
+ if (PostParamsPtr->MemConfig.UmaMode == UMA_NONE) {
+ GnbRegisterReadKB (GnbHandle, TYPE_D0F0xD4, 0x13014AC, &var5.Value, 0, StdHeader);
+ GnbRegisterReadKB (GnbHandle, TYPE_D0F0xD4, 0x13014B6, &var6.Value, 0, StdHeader);
+ var5.Field.bit16 = FALSE;
+ var6.Field.bit13 = FALSE;
+ GnbRegisterWriteKB (GnbHandle, TYPE_D0F0xD4, 0x13014AC, &var5.Value, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+ GnbRegisterWriteKB (GnbHandle, TYPE_D0F0xD4, 0x13014B6, &var6.Value, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+ }
+
+ // Power down iGPU
+ GfxRequestGPUPowerV3 (Gfx, 0);
+ } else {
+ PostParamsPtr->MemConfig.UmaMode = UMA_NONE;
+ }
+ } else {
+ PostParamsPtr->MemConfig.UmaMode = UMA_NONE;
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxPostInterfaceKB Exit [0x%x]\n", Status);
+ return Status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxSamuInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxSamuInitKB.c
new file mode 100644
index 0000000..66cf992
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxSamuInitKB.c
@@ -0,0 +1,253 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe late post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 86584 $ @e \$Date: 2013-01-23 12:34:28 -0600 (Wed, 23 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbCommonLib.h"
+#include "GnbTable.h"
+#include "GnbPcieConfig.h"
+#include "GnbRegisterAccKB.h"
+#include "cpuFamilyTranslation.h"
+#include "GnbRegistersKB.h"
+#include "GfxLibKB.h"
+#include "GfxSamuInitKB.h"
+#include "GnbSamuPatchKB.h"
+#include "OptionGnb.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GFXSAMUINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+#define LENGTH_1MBYTE 0x0100000ul
+#define MASK_1MBYTE 0x0FFFFFul
+
+#define SAM_IND_INDEX 0x22000ul
+#define SAM_IND_DATA 0x22004ul
+
+#define SAM_SAB_IND_INDEX 0x22008ul
+#define SAM_SAB_IND_DATA 0x2200Cul
+
+#define SMU_TOOLS_INDEX 0x238ul
+#define SMU_TOOLS_DATA 0x23Cul
+
+typedef struct {
+ UINT32 BootControl; ///<
+ UINT32 KeySelect; ///<
+ UINT32 KernelAddrLo; ///<
+ UINT32 KernelAddrHi; ///<
+ UINT32 TweakSelect; ///<
+} SAMU_BOOT_CONTROL;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize GMC
+ *
+ *
+ *
+ * @param[in] Gfx Pointer to global GFX configuration
+ *
+ */
+
+AGESA_STATUS
+GfxSamuInit (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ )
+{
+ UINT32 D0F0xBC_xC00C0000;
+ GNB_HANDLE *GnbHandle;
+ VOID *ControlXBuffer;
+ VOID *AlignedControlXBuffer;
+ VOID *PatchYBuffer;
+ VOID *AlignedPatchYBuffer;
+ SAMU_BOOT_CONTROL *SamuBootControl;
+
+ UINT32 D0F0xBC_x800000A4;
+ UINT32 GMMx22000;
+ UINT32 GMMx22004;
+ UINT32 GMMx22008;
+ UINT32 GMMx2200C;
+ UINT32 LoopCount;
+ BOOLEAN SamuUseF1dPatch;
+ BOOLEAN SamuPatchEnabled;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbSamuInit Enter\n");
+
+ GnbHandle = GnbGetHandle (GnbLibGetHeader (Gfx));
+ ASSERT (GnbHandle != NULL);
+ GnbRegisterReadKB (GnbHandle, 0x4, 0xc00c0000,
+ &D0F0xBC_xC00C0000, 0, GnbLibGetHeader (Gfx));
+
+ SamuPatchEnabled = GnbBuildOptions.CfgSamuPatchEnabled;
+ IDS_OPTION_HOOK (IDS_GNB_LOAD_SAMU_PATCH, &SamuPatchEnabled, GnbLibGetHeader (Gfx));
+
+ if ((((D0F0xBC_xC00C0000) & BIT24) == 0) &&
+ (SamuPatchEnabled == TRUE)) {
+
+ // Decide which version of the patch to use
+ SamuUseF1dPatch = TRUE;
+
+ GMMx22008 = 0x29;
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x22008,
+ &GMMx22008, 0, GnbLibGetHeader (Gfx));
+ GnbRegisterReadKB (GnbHandle, 0x12, 0x2200C,
+ &GMMx2200C, 0, GnbLibGetHeader (Gfx));
+ IDS_HDT_CONSOLE (GNB_TRACE, " SAMSAB:29=%08x\n", GMMx2200C);
+
+ if (GMMx2200C == 0x80000001) {
+ SamuUseF1dPatch = FALSE;
+ }
+
+ ControlXBuffer = GnbAllocateHeapBufferAndClear (AMD_GNB_SAMU_BOOT_CONTROL_HANDLE, 2 * LENGTH_1MBYTE, GnbLibGetHeader (Gfx));
+ ASSERT (ControlXBuffer != NULL);
+ if (ControlXBuffer == NULL) {
+ return AGESA_ERROR;
+ }
+ AlignedControlXBuffer = (VOID *) (((UINTN)ControlXBuffer + LENGTH_1MBYTE) & (~MASK_1MBYTE));
+ PatchYBuffer = GnbAllocateHeapBuffer (AMD_GNB_SAMU_PATCH_HANDLE, 2 * LENGTH_1MBYTE, GnbLibGetHeader (Gfx));
+ ASSERT (PatchYBuffer != NULL);
+ if (PatchYBuffer == NULL) {
+ return AGESA_ERROR;
+ }
+ AlignedPatchYBuffer = (VOID *) (((UINTN)PatchYBuffer + LENGTH_1MBYTE) & (~MASK_1MBYTE));
+
+ // Copy samu firmware patch to PatchYBuffer
+ if (SamuUseF1dPatch == TRUE) {
+ LibAmdMemCopy (AlignedPatchYBuffer, &SamuPatchKB[0],
+ SamuPatchKBHeader[1], GnbLibGetHeader (Gfx));
+ } else {
+ LibAmdMemCopy (AlignedPatchYBuffer, &SamuPatchKBUnf1[0],
+ SamuPatchKBHeaderUnf1[1], GnbLibGetHeader (Gfx));
+ }
+
+ // WBINVD
+ LibAmdWriteBackInvalidateCache ();
+
+ // Load boot control structure
+ SamuBootControl = (SAMU_BOOT_CONTROL *)AlignedControlXBuffer;
+ SamuBootControl->BootControl = 0x3;
+ SamuBootControl->KernelAddrLo = (UINT32) (AlignedPatchYBuffer);
+ SamuBootControl->KernelAddrHi = 0; //(UINT32) ((((UINT64) AlignedPatchYBuffer) >> 32) & 0xFF);
+ if (SamuUseF1dPatch == TRUE) {
+ SamuBootControl->TweakSelect = 0xBB027E1F;
+ SamuBootControl->KeySelect = 0x8E174F83;
+ } else {
+ SamuBootControl->TweakSelect = 0x0;
+ SamuBootControl->KeySelect = 0x0;
+ }
+
+
+ // Write 0x0 to SAM_CGC_HOST_CTRL to release the clock-gating of SAMU
+ GMMx22000 = 0x3;
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x22000, &GMMx22000, 0, GnbLibGetHeader (Gfx));
+ GMMx22004 = 0x0;
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x22004, &GMMx22004, 0, GnbLibGetHeader (Gfx));
+
+ // Write (physical address of boot control structure)>>8 into SAM_SAB_INIT_TLB_CONFIG (Location X >> 8)
+ GMMx22008 = 0x4;
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x22008, &GMMx22008, 0, GnbLibGetHeader (Gfx));
+ GMMx2200C = ((UINT32) ((UINT32) AlignedControlXBuffer)) >> 8;
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x2200C, &GMMx2200C, 0, GnbLibGetHeader (Gfx));
+
+ // Write 0x0 to SAM_RST_HOST_SOFT_RESET
+ GMMx22000 = 0x1;
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x22000, &GMMx22000, 0, GnbLibGetHeader (Gfx));
+ GMMx22004 = 0x0;
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x22004, &GMMx22004, 0, GnbLibGetHeader (Gfx));
+
+ // Write 0x2 to SAM_SCRATCH_0 to start the firmware boot
+ GMMx22000 = 0x38;
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x22000, &GMMx22000, 0, GnbLibGetHeader (Gfx));
+ GMMx22004 = 0x2;
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x22004, &GMMx22004, 0, GnbLibGetHeader (Gfx));
+
+ // Poll SAM_RST_HOST_SOFT_RST_RDY and wait for HOST_RDY
+ do {
+ // Write 0x2 to SAM_SCRATCH_0 to start the firmware boot
+ GMMx22000 = 0x51;
+ GnbRegisterWriteKB (GnbHandle, 0x12, 0x22000, &GMMx22000, 0, GnbLibGetHeader (Gfx));
+ GnbRegisterReadKB (GnbHandle, 0x12, 0x22004, &GMMx22004, 0, GnbLibGetHeader (Gfx));
+ } while ((GMMx22004 & BIT0) == 0);
+
+ // Clear the allocated memory ranges, locations X and Y (write 0), issue WBINVD
+ LibAmdMemFill (ControlXBuffer, 0, 2 * LENGTH_1MBYTE, GnbLibGetHeader (Gfx));
+ LibAmdMemFill (PatchYBuffer, 0, 2 * LENGTH_1MBYTE, GnbLibGetHeader (Gfx));
+ LibAmdWriteBackInvalidateCache ();
+
+ // Confirm read of SMC_DRAM_ACCESS_CNTL is 0x1
+ D0F0xBC_x800000A4 = 0;
+ for (LoopCount = 0; LoopCount < 0x00FFFFFF; LoopCount++) {
+ GnbRegisterReadKB (GnbHandle, 0x4, 0x800000A4, &D0F0xBC_x800000A4, 0, GnbLibGetHeader (Gfx));
+ if ((D0F0xBC_x800000A4 & BIT0) != 0) {
+ break;
+ }
+ }
+ ASSERT ((D0F0xBC_x800000A4 & BIT0) != 0);
+ }
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbSamuInit Exit\n");
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxSamuInitKB.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxSamuInitKB.h
new file mode 100644
index 0000000..44dd893
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxSamuInitKB.h
@@ -0,0 +1,53 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * various service procedures
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBSAMUINITKB_H_
+#define _GNBSAMUINITKB_H_
+
+AGESA_STATUS
+GfxSamuInit (
+ IN GFX_PLATFORM_CONFIG *Gfx
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxTablesKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxTablesKB.c
new file mode 100644
index 0000000..99e7f93
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GfxTablesKB.c
@@ -0,0 +1,479 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GFx tables
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 87698 $ @e \$Date: 2013-02-07 12:40:51 -0600 (Thu, 07 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbTable.h"
+#include "GnbRegistersKB.h"
+#include "cpuFamilyTranslation.h"
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T A B L E S
+ *----------------------------------------------------------------------------------------
+ */
+
+GNB_TABLE ROMDATA GfxGmcFeature1DisableKB [] = {
+ //2.1 Disable clock-gating
+ GNB_ENTRY_WR (0x12, 0x20C0, 0x00000C80),
+ GNB_ENTRY_WR (0x12, 0x2478, 0x00000400),
+ GNB_ENTRY_WR (0x12, 0x20B8, 0x00000400),
+ GNB_ENTRY_WR (0x12, 0x20BC, 0x00000400),
+ GNB_ENTRY_WR (0x12, 0x2648, 0x00000400),
+ GNB_ENTRY_WR (0x12, 0x264C, 0x00000400),
+ GNB_ENTRY_WR (0x12, 0x2650, 0x00000400),
+ GNB_ENTRY_WR (0x12, 0x15C0, 0x00000400),
+ GNB_ENTRY_TERMINATE
+};
+
+GNB_TABLE ROMDATA GfxGmcInitTableKB [] = {
+ GNB_ENTRY_RMW (D18F5x178_TYPE, D18F5x178_ADDRESS, D18F5x178_SwGfxDis_MASK, 0 << D18F5x178_SwGfxDis_OFFSET),
+ //2.2 System memory address translation
+ GNB_ENTRY_COPY (0x12, 0x2814, 0, 32, D18F2x40_dct0_TYPE, D18F2x40_dct0_ADDRESS, 0, 32),
+ GNB_ENTRY_COPY (0x12, 0x281C, 0, 32, D18F2x44_dct0_TYPE, D18F2x44_dct0_ADDRESS, 0, 32),
+ GNB_ENTRY_COPY (0x12, 0x2824, 0, 32, D18F2x48_dct0_TYPE, D18F2x48_dct0_ADDRESS, 0, 32),
+ GNB_ENTRY_COPY (0x12, 0x282C, 0, 32, D18F2x4C_dct0_TYPE, D18F2x4C_dct0_ADDRESS, 0, 32),
+ GNB_ENTRY_COPY (0x12, 0x2834, 0, 32, D18F2x60_dct0_TYPE, D18F2x60_dct0_ADDRESS, 0, 32),
+ GNB_ENTRY_COPY (0x12, 0x283C, 0, 32, D18F2x64_dct0_TYPE, D18F2x64_dct0_ADDRESS, 0, 32),
+ // MC_FUS_DRAM0_BANK_ADDR_MAPPING
+ GNB_ENTRY_COPY (0x12, 0x2844, 0, 8, D18F2x80_dct0_TYPE, D18F2x80_dct0_ADDRESS, 0, 8),
+ GNB_ENTRY_COPY (0x12, 0x2844, 8, 1, D18F2x94_dct0_TYPE, D18F2x94_dct0_ADDRESS, 22, 1),
+ GNB_ENTRY_COPY (0x12, 0x2844, 9, 1, D18F2xA8_dct0_TYPE, D18F2xA8_dct0_ADDRESS, 20, 1),
+ // MC_FUS_DRAM0_CTL_BASE
+ GNB_ENTRY_COPY (0x12, 0x284C, 0, 3, D18F1x200_TYPE, D18F1x200_ADDRESS, 4, 3),
+ GNB_ENTRY_COPY (0x12, 0x284C, 3, 4, D18F1x204_TYPE, D18F1x204_ADDRESS, 0, 4),
+ GNB_ENTRY_COPY (0x12, 0x284C, 7, 21, D18F1x200_TYPE, D18F1x200_ADDRESS, 11, 21),
+ GNB_ENTRY_COPY (0x12, 0x284C, 28, 1, D18F1x200_TYPE, D18F1x200_ADDRESS, 3, 1),
+ GNB_ENTRY_COPY (0x12, 0x284C, 29, 1, D18F1x200_TYPE, D18F1x200_ADDRESS, 0, 1),
+ // MC_FUS_DRAM0_CTL_LIMIT
+ GNB_ENTRY_COPY (0x12, 0x2854, 0, 21, D18F1x204_TYPE, D18F1x204_ADDRESS, 11, 21),
+ GNB_ENTRY_COPY (0x12, 0x2854, 21, 1, D18F1xF0_TYPE, D18F1xF0_ADDRESS, 1, 1),
+ // MC_FUS_DRAM_MODE
+ GNB_ENTRY_COPY (0x12, 0x2864, 3, 1, D18F2x78_dct0_TYPE, D18F2x78_dct0_ADDRESS, 8, 1),
+ GNB_ENTRY_COPY (0x12, 0x2864, 4, 9, D18F1xF0_TYPE, D18F1xF0_ADDRESS, 7, 9),
+ GNB_ENTRY_COPY (0x12, 0x2864, 0, 2, D18F2x110_TYPE, D18F2x110_ADDRESS, 6, 2),
+ GNB_ENTRY_COPY (0x12, 0x2864, 2, 1, D18F2x114_TYPE, D18F2x114_ADDRESS, 9, 1),
+ // MC_FUS_DRAM_CTL_HIGH_01
+ GNB_ENTRY_COPY (0x12, 0x285C, 0, 12, D18F1x240_TYPE, D18F1x240_ADDRESS, 11, 12),
+
+ // 2.4 Sequencer model programming
+ GNB_ENTRY_WR (0x12, 0x276C, 0x000003ff),
+
+ //---------------------------------------------------------------------------
+ // 2.5 Power gating init
+ // Initializing PGFSMs
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x3538, 0x200010ff),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x3538, 0x300010ff),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x210000),
+ GNB_ENTRY_WR (0x12, 0x3538, 0xa00010ff),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x21003),
+ GNB_ENTRY_WR (0x12, 0x3538, 0xb00010ff),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x2b00),
+ GNB_ENTRY_WR (0x12, 0x3538, 0xc00010ff),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x3538, 0xd00010ff),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x420000),
+ GNB_ENTRY_WR (0x12, 0x3538, 0x100010ff),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x120202),
+ GNB_ENTRY_WR (0x12, 0x3538, 0x500010ff),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x3e3e36),
+ GNB_ENTRY_WR (0x12, 0x3538, 0x600010ff),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x373f3e),
+ GNB_ENTRY_WR (0x12, 0x3538, 0x700010ff),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x0),
+ GNB_ENTRY_WR (0x12, 0x353C, 0x3e1332),
+ GNB_ENTRY_WR (0x12, 0x3538, 0xe00010ff),
+//---------------------------------------------------------------------------
+// Initializing register engine
+// opcode=1, body_cnt=0, mask=0xf, const=0xf: MC_CONFIG (0x800) MC_CONFIG (0x800)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x0),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x10000800),
+ GNB_ENTRY_WR (0x12, 0x3504, 0xf),
+ GNB_ENTRY_WR (0x12, 0x3504, 0xf),
+// opcode=1, body_cnt=0, mask=0x3f, const=0x3f: MC_CONFIG_MCD (0x828) MC_CONFIG_MCD (0x828)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x4),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x10000828),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x3f),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x3f),
+// opcode=1, body_cnt=0, mask=0xffff, const=0xffff: VM_INVALIDATE_REQUEST (0x51e) VM_INVALIDATE_REQUEST (0x51e)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x8),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x1000051e),
+ GNB_ENTRY_WR (0x12, 0x3504, 0xffff),
+ GNB_ENTRY_WR (0x12, 0x3504, 0xffff),
+// opcode=0, body_cnt=2: VM_L2_CNTL (0x500) VM_L2_CNTL3 (0x502)
+ GNB_ENTRY_WR (0x12, 0x3500, 0xc),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x20500),
+// opcode=0, body_cnt=4: VM_CONTEXT0_CNTL (0x504) VM_SECURE_FAULT_CNTL (0x508)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x10),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x40504),
+// opcode=0, body_cnt=9: VM_CONTEXT0_CNTL2 (0x50c) VM_CONTEXT15_PAGE_TABLE_BASE_ADDR (0x515)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x16),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x9050c),
+// opcode=0, body_cnt=9: VM_PRT_APERTURE0_LOW_ADDR (0x52c) VM_CONTEXTS_DISABLE (0x535)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x21),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x9052c),
+// opcode=0, body_cnt=1: VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR (0x546) VM_CONTEXT1_PROTECTION_FAULT_DEFAULT_ADDR (0x547)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x2c),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x10546),
+// opcode=0, body_cnt=10: VM_FAULT_CLIENT_ID (0x54e) VM_CONTEXT1_PAGE_TABLE_START_ADDR (0x558)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x2f),
+ GNB_ENTRY_WR (0x12, 0x3504, 0xa054e),
+// opcode=0, body_cnt=1: VM_CONTEXT0_PAGE_TABLE_END_ADDR (0x55f) VM_CONTEXT1_PAGE_TABLE_END_ADDR (0x560)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x3b),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x1055f),
+// opcode=0, body_cnt=1: VM_DEBUG (0x56f) VM_L2_CG (0x570)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x3e),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x1056f),
+// opcode=0, body_cnt=1: VM_L2_BANK_SELECT_MASKA (0x572) VM_L2_BANK_SELECT_MASKB (0x573)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x41),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x10572),
+// opcode=0, body_cnt=2: VM_L2_CONTEXT1_IDENTITY_APERTURE_LOW_ADDR (0x575) VM_L2_CONTEXT_IDENTITY_PHYSICAL_OFFSET (0x577)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x44),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x20575),
+// opcode=0, body_cnt=53: MC_CITF_PERFCOUNTER_LO (0x7a0) ATC_PERFCOUNTER_RSLT_CNTL (0x7d5)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x48),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x3507a0),
+// opcode=0, body_cnt=0: MC_ARB_PERF_MON_CNTL0_ECC (0x7db) MC_ARB_PERF_MON_CNTL0_ECC (0x7db)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x7f),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x7db),
+// opcode=0, body_cnt=26: MC_SHARED_CHMAP (0x801) MC_VM_STEERING (0x81b)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x81),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x1a0801),
+// opcode=0, body_cnt=2: MC_CG_CONFIG_MCD (0x829) MC_SHARED_BLACKOUT_CNTL (0x82b)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x9d),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x20829),
+// opcode=0, body_cnt=4: MC_HUB_MISC_POWER (0x82d) MC_HUB_MISC_DBG (0x831)
+ GNB_ENTRY_WR (0x12, 0x3500, 0xa1),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x4082d),
+// opcode=0, body_cnt=4: MC_HUB_MISC_OVERRIDE (0x833) MC_HUB_WDP_BP (0x837)
+ GNB_ENTRY_WR (0x12, 0x3500, 0xa7),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x40833),
+// opcode=0, body_cnt=11: MC_HUB_RDREQ_CNTL (0x83b) MC_HUB_SHARED_DAGB_DLY (0x846)
+ GNB_ENTRY_WR (0x12, 0x3500, 0xad),
+ GNB_ENTRY_WR (0x12, 0x3504, 0xb083b),
+// opcode=0, body_cnt=1: MC_HUB_RDREQ_DMIF_LIMIT (0x848) MC_HUB_RDREQ_ACPG_LIMIT (0x849)
+ GNB_ENTRY_WR (0x12, 0x3500, 0xba),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x10848),
+// opcode=0, body_cnt=63: MC_HUB_WDP_SH2 (0x84d) MC_HUB_WDP_SAM (0x88c)
+ GNB_ENTRY_WR (0x12, 0x3500, 0xbd),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x3f084d),
+// opcode=0, body_cnt=0: MC_VM_MB_L1_TLB0_DEBUG (0x891) MC_VM_MB_L1_TLB0_DEBUG (0x891)
+ GNB_ENTRY_WR (0x12, 0x3500, 0xfe),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x891),
+// opcode=0, body_cnt=0: MC_VM_MB_L1_TLB2_DEBUG (0x893) MC_VM_MB_L1_TLB2_DEBUG (0x893)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x100),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x893),
+// opcode=0, body_cnt=0: MC_VM_MB_L2ARBITER_L2_CREDITS (0x8a1) MC_VM_MB_L2ARBITER_L2_CREDITS (0x8a1)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x102),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x8a1),
+// opcode=0, body_cnt=0: MC_VM_MB_L1_TLB3_DEBUG (0x8a5) MC_VM_MB_L1_TLB3_DEBUG (0x8a5)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x104),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x8a5),
+// opcode=0, body_cnt=51: MC_XPB_RTR_SRC_APRTR0 (0x8cd) MC_XPB_UNC_THRESH_SID (0x900)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x106),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x3308cd),
+// opcode=0, body_cnt=1: MC_XPB_WCB_CFG (0x902) MC_XPB_P2P_BAR_CFG (0x903)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x13b),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x10902),
+// opcode=0, body_cnt=19: MC_XPB_P2P_BAR_SETUP (0x90c) MC_XPB_INTF_CFG (0x91f)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x13e),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x13090c),
+// opcode=0, body_cnt=0: MC_XPB_SUB_CTRL (0x922) MC_XPB_SUB_CTRL (0x922)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x153),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x922),
+// opcode=0, body_cnt=0: MC_XPB_PERF_KNOBS (0x924) MC_XPB_PERF_KNOBS (0x924)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x155),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x924),
+// opcode=0, body_cnt=20: MC_XPB_STICKY_W1C (0x926) MC_XPB_CLG_CFG36 (0x93a)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x157),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x140926),
+// opcode=2, body_cnt=0: MC_RPB_CID_QUEUE_EX (0x95a)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x16d),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x2000095a),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x1),
+// opcode=3, body_cnt=31: MC_RPB_CID_QUEUE_EX_DATA (0x95b)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x16f),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x301f095b),
+// opcode=0, body_cnt=12: MC_RPB_CONF (0x94d) MC_RPB_PERF_COUNTER_STATUS (0x959)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x190),
+ GNB_ENTRY_WR (0x12, 0x3504, 0xc094d),
+// opcode=0, body_cnt=16: MC_CITF_XTRA_ENABLE (0x96d) MC_CITF_INT_CREDITS_WR (0x97d)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x19e),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x10096d),
+// opcode=0, body_cnt=12: MC_CITF_WTM_RD_CNTL (0x97f) MC_WR_GRP_LCL (0x98b)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x1b0),
+ GNB_ENTRY_WR (0x12, 0x3504, 0xc097f),
+// opcode=0, body_cnt=0: MC_CITF_PERF_MON_CNTL2 (0x98e) MC_CITF_PERF_MON_CNTL2 (0x98e)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x1be),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x98e),
+// opcode=0, body_cnt=2: MC_CITF_MISC_RD_CG (0x992) MC_CITF_MISC_VM_CG (0x994)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x1c0),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x20992),
+// opcode=0, body_cnt=2: MC_VM_MD_L1_TLB0_DEBUG (0x998) MC_VM_MD_L1_TLB2_DEBUG (0x99a)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x1c4),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x20998),
+// opcode=0, body_cnt=0: MC_VM_MD_L2ARBITER_L2_CREDITS (0x9a4) MC_VM_MD_L2ARBITER_L2_CREDITS (0x9a4)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x1c8),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x9a4),
+// opcode=0, body_cnt=0: MC_VM_MD_L1_TLB3_DEBUG (0x9a7) MC_VM_MD_L1_TLB3_DEBUG (0x9a7)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x1ca),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x9a7),
+// opcode=0, body_cnt=6: MC_ARB_AGE_CNTL (0x9bf) MC_ARB_GECC2_DEBUG2 (0x9c5)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x1cc),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x609bf),
+// opcode=0, body_cnt=45: MC_ARB_GECC2 (0x9c9) MC_ARB_MAX_LAT_CID (0x9f6)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x1d4),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x2d09c9),
+// opcode=0, body_cnt=3: MC_ARB_SSM (0x9f9) MC_ARB_DRAM_TIMING_1 (0x9fc)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x203),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x309f9),
+// opcode=0, body_cnt=0: MC_ARB_DRAM_TIMING2_1 (0x9ff) MC_ARB_DRAM_TIMING2_1 (0x9ff)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x208),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x9ff),
+// opcode=0, body_cnt=2: MC_ARB_BURST_TIME (0xa02) MC_ARB_SCRAMBLE_KEY1 (0xa04)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x20a),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x20a02),
+// opcode=0, body_cnt=6: MC_FUS_DRAM0_CTL_BASE (0xa13) MC_FUS_DRAM_MODE (0xa19)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x20e),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x60a13),
+// opcode=0, body_cnt=3: MC_FUS_ARB_GARLIC_ISOC_PRI (0xa1f) MC_FUS_ARB_GARLIC_WR_PRI2 (0xa22)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x216),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x30a1f),
+// opcode=1, body_cnt=0, mask=0x3f, const=0x0: ATC_ATS_FAULT_CNTL (0xccd) ATC_ATS_FAULT_CNTL (0xccd)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x21b),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x10000ccd),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x3f),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x0),
+// opcode=0, body_cnt=7: ATC_VM_APERTURE0_LOW_ADDR (0xcc0) ATC_VM_APERTURE1_CNTL2 (0xcc7)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x21f),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x70cc0),
+// opcode=0, body_cnt=2: ATC_ATS_CNTL (0xcc9) ATC_ATS_FAULT_DEBUG (0xccb)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x228),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x20cc9),
+// opcode=0, body_cnt=1: ATC_ATS_DEFAULT_PAGE_LOW (0xcd0) ATC_ATS_DEFAULT_PAGE_CNTL (0xcd1)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x22c),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x10cd0),
+// opcode=0, body_cnt=4: ATC_MISC_CG (0xcd4) ATC_L2_DEBUG2 (0xcd8)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x22f),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x40cd4),
+// opcode=0, body_cnt=5: ATC_L1_CNTL (0xcdc) ATC_L1WR_STATUS (0xce1)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x235),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x50cdc),
+// opcode=0, body_cnt=16: ATC_VMID_PASID_MAPPING_UPDATE_STATUS (0xce6) ATC_VMID15_PASID_MAPPING (0xcf6)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x23c),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x100ce6),
+// opcode=0, body_cnt=0: ATC_ATS_FAULT_CNTL (0xccd) ATC_ATS_FAULT_CNTL (0xccd)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x24e),
+ GNB_ENTRY_WR (0x12, 0x3504, 0xccd),
+// opcode=0, body_cnt=23: MC_ARB_HARSH_EN_RD (0xdc0) MC_ARB_HARSH_CTL_WR (0xdd7)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x250),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x170dc0),
+// opcode=0, body_cnt=0: MC_CONFIG (0x800) MC_CONFIG (0x800)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x269),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x800),
+// opcode=0, body_cnt=0: MC_CONFIG_MCD (0x828) MC_CONFIG_MCD (0x828)
+ GNB_ENTRY_WR (0x12, 0x3500, 0x26b),
+ GNB_ENTRY_WR (0x12, 0x3504, 0x828),
+//---------------------------------------------------------------------------
+// Setting up end pointers
+ GNB_ENTRY_RMW (0x12, 0x3508, 0xfffff000, 0x9b26c000),
+//---------------------------------------------------------------------------
+// Enabling light sleep
+ GNB_ENTRY_RMW (0x12, 0x3544, 0x6000000, 0x2000000),
+
+ // 2.7 Performance tuning
+ GNB_ENTRY_WR (0x12, 0x27D0, 0x10724847),
+ GNB_ENTRY_WR (0x12, 0x27C0, 0x00C32008),
+ GNB_ENTRY_WR (0x12, 0x27C4, 0x00C32006),
+ GNB_ENTRY_WR (0x12, 0x277C, 0x00000007),
+ GNB_ENTRY_WR (0x12, 0x218C, 0x000021b1),
+ GNB_ENTRY_WR (0x12, 0x201C, 0x47773337),
+ GNB_ENTRY_WR (0x12, 0x2020, 0x73773337),
+ GNB_ENTRY_WR (0x12, 0x2018, 0x66334303),
+ GNB_ENTRY_WR (0x12, 0x2014, 0x66300333),
+ GNB_ENTRY_WR (0x12, 0x2794, 0xfcfcfdfc),
+ GNB_ENTRY_WR (0x12, 0x2798, 0xfcfcfdfc),
+ GNB_ENTRY_WR (0x12, 0x27A4, 0x00ffffff),
+ GNB_ENTRY_WR (0x12, 0x27A8, 0x00ffffff),
+ GNB_ENTRY_WR (0x12, 0x278C, 0x00000008),
+ GNB_ENTRY_WR (0x12, 0x2790, 0x00000008),
+ GNB_ENTRY_WR (0x12, 0x2628, 0x55111000),
+ GNB_ENTRY_WR (0x12, 0x25E0, 0x00000025),
+ GNB_ENTRY_WR (0x12, 0x262C, 0x10555111),
+ GNB_ENTRY_WR (0x12, 0x25E4, 0x00000025),
+ GNB_ENTRY_WR (0x12, 0x25C8, 0x0080685F),
+ GNB_ENTRY_WR (0x12, 0x25CC, 0x0000807F),
+ GNB_ENTRY_WR (0x12, 0x2144, 0x50A1421D),
+ GNB_ENTRY_WR (0x12, 0x20EC, 0x0000001C),
+ GNB_ENTRY_WR (0x12, 0x2184, 0x0000A1F1),
+ GNB_ENTRY_WR (0x12, 0x21E0, 0x0000A1F1),
+ GNB_ENTRY_WR (0x12, 0x217C, 0x0000A1F1),
+ GNB_ENTRY_WR (0x12, 0x21C0, 0x0000A1F1),
+ GNB_ENTRY_WR (0x12, 0x2214, 0x000021B1),
+ GNB_ENTRY_WR (0x12, 0x2220, 0x000021B1),
+ GNB_ENTRY_WR (0x12, 0x3758, 0x00000800),
+ GNB_ENTRY_WR (0x12, 0x375C, 0x00000800),
+ GNB_ENTRY_WR (0x12, 0x3700, 0xD1000000),
+ GNB_ENTRY_WR (0x12, 0x3704, 0xD0000000),
+ GNB_ENTRY_WR (0x12, 0x3748, 0x0000007F),
+ GNB_ENTRY_WR (0x12, 0x3750, 0x18201015),
+ GNB_ENTRY_WR (0x12, 0x3754, 0x18201015),
+ GNB_ENTRY_WR (0x12, 0x253C, 0x000000B4),
+ GNB_ENTRY_WR (0x12, 0x2550, 0x000000A3),
+ GNB_ENTRY_WR (0x12, 0x2558, 0x00002077),
+ GNB_ENTRY_WR (0x12, 0x2558, 0x000020B7),
+ GNB_ENTRY_WR (0x12, 0x2558, 0x00002A3D),
+
+ GNB_ENTRY_WR (0x12, 0x287C, 0x0c000911),
+
+ //2.9 Display latency
+ GNB_ENTRY_WR (0x12, 0x2114, 0x00000015),
+
+ GNB_ENTRY_WR (0x12, 0x2880, 0xFCFE8000),
+
+ //2.12 Remove blackout
+ GNB_ENTRY_WR (0x12, 0x20AC, 0x00000000),
+
+ // VCE Optimization
+ GNB_ENTRY_RMW (0x12, 0x2108, 0xff00, (1 << 8)),
+ GNB_ENTRY_WR (0x12, 0x21fc, 0xA1F1),
+ GNB_ENTRY_WR (0x12, 0x2198, 0xA1F1),
+
+ // STCTRL_IGNORE_PROTECTION_FAULT
+ GNB_ENTRY_RMW (0x12, 0x350C, 0x01000000, (1 << 24)),
+
+ GNB_ENTRY_RMW (0x12, 0x5490, 0x2 | 0x1, (1 << 0) | (1 << 1)),
+
+ GNB_ENTRY_TERMINATE
+};
+
+GNB_TABLE ROMDATA GfxGmcFeature1EnableKB [] = {
+ GNB_ENTRY_WR (0x12, 0x20C0, 0x000c0c80),
+ GNB_ENTRY_WR (0x12, 0x2478, 0x000c0400),
+ GNB_ENTRY_WR (0x12, 0x20B8, 0x000c0400),
+ GNB_ENTRY_WR (0x12, 0x20BC, 0x000c0400),
+ GNB_ENTRY_WR (0x12, 0x2648, 0x00080400),
+ GNB_ENTRY_WR (0x12, 0x264C, 0x000c0400),
+ GNB_ENTRY_WR (0x12, 0x2650, 0x000c0400),
+ GNB_ENTRY_WR (0x12, 0x15C0, 0x000c0400),
+ GNB_ENTRY_TERMINATE
+};
+
+GNB_TABLE ROMDATA GfxEnvInitTableKB [] = {
+ GNB_ENTRY_TERMINATE
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbEarlyInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbEarlyInitKB.c
new file mode 100644
index 0000000..288884b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbEarlyInitKB.c
@@ -0,0 +1,459 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB early post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84838 $ @e \$Date: 2012-12-20 10:04:21 -0600 (Thu, 20 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "OptionGnb.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbTable.h"
+#include "GnbSmuInitLibV7.h"
+#include "GnbSmuFirmwareKB.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbRegistersKB.h"
+#include "cpuF16PowerMgmt.h"
+#include "excel925.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GNBEARLYINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern GNB_TABLE ROMDATA GnbEarlierInitTableBeforeSmuKB [];
+extern GNB_TABLE ROMDATA GnbEarlyInitTableKB [];
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+extern BUILD_OPT_CFG UserOptions;
+
+#define CFG_DISP_PHY_TDP_LIMIT 0
+#define CFG_FCH_PWR_CREDIT 0
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GnbEarlyInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GnbEarlierInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GnbScsInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+OptionGnbInstall581 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+STATIC VOID
+GnbEarlyInitKB129_fun (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AMD_EARLY_PARAMS *EarlyParams;
+ UINT32 v0;
+ UINT32 v1;
+ D18F4x110_STRUCT D18F4x110;
+ D18F5xE0_STRUCT D18F5xE0;
+ UINT32 v4;
+ UINT32 Data;
+
+ EarlyParams = (AMD_EARLY_PARAMS *) StdHeader;
+
+ v0 = ((EarlyParams->PlatformConfig.VrmProperties[CoreVrm].CurrentLimit / 10) & 0xFFFF) |
+ (((EarlyParams->PlatformConfig.VrmProperties[NbVrm].CurrentLimit / 10) & 0xFFFF) << 16);
+ GnbRegisterWriteKB (GnbGetHandle (StdHeader), 0x4, 0x3FA04, &v0, 0, StdHeader);
+
+ v1 = ((EarlyParams->PlatformConfig.VrmProperties[CoreVrm].SviOcpLevel / 10) & 0xFFFF) |
+ (((EarlyParams->PlatformConfig.VrmProperties[NbVrm].SviOcpLevel / 10) & 0xFFFF) << 16);
+ GnbRegisterWriteKB (GnbGetHandle (StdHeader), 0x4, 0x3f994, &v1, 0, StdHeader);
+
+ GnbRegisterReadKB (GnbGetHandle (StdHeader),
+ D18F4x110_TYPE, D18F4x110_ADDRESS, &D18F4x110, 0, StdHeader);
+ GnbRegisterReadKB (GnbGetHandle (StdHeader),
+ D18F5xE0_TYPE, D18F5xE0_ADDRESS, &D18F5xE0, 0, StdHeader);
+
+ // Period = (2^(RunAvgRange + 1)*CSampleTimer*5.12)us - round down to nearest 10uS
+ Data = D18F5xE0.Field.RunAvgRange + 1;
+ Data = 1 << Data;
+ Data *= D18F4x110.Field.CSampleTimer;
+ Data = ((Data * 512) / 1000) * 10;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "VPC period = %d\n", Data);
+
+ v4 = Data;
+ GnbRegisterWriteKB (GnbGetHandle (StdHeader),
+ 0x4, 0x3F830, &v4, 0, StdHeader);
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+STATIC VOID
+GnbEarlyInitKB180_fun (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ D18F3xA8_STRUCT D18F3xA8;
+ UINT32 D0F0xBC_x3F9D8;
+ UINT64 MsrData;
+
+ GnbRegisterReadKB (GnbGetHandle (StdHeader), D18F3xA8_TYPE, D18F3xA8_ADDRESS, &D18F3xA8, 0, StdHeader);
+ GnbRegisterReadKB (GnbGetHandle (StdHeader), 0x4, 0x3F9D8, &D0F0xBC_x3F9D8, 0, StdHeader);
+ D0F0xBC_x3F9D8 &= ~(0xF << 24);
+ D0F0xBC_x3F9D8 |= (D18F3xA8.Field.PopDownPstate & 0x7) << 24;
+ LibAmdMsrRead ((PS_REG_BASE + D18F3xA8.Field.PopDownPstate), &MsrData, StdHeader);
+ D0F0xBC_x3F9D8 |= (((MsrData & (1 << 22)) == 0) ? (1 << 27) :0);
+ GnbRegisterWriteKB (GnbGetHandle (StdHeader), 0x4, 0x3F9D8, &D0F0xBC_x3F9D8, 0, StdHeader);
+ return;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init Package Power Support
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ */
+
+STATIC VOID
+GnbInitPkgPowerKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 D0F0xBC_x3F834;
+ UINT32 D0F0xBC_x3F838;
+ UINT32 D0F0xBC_x3F844;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbInitPkgPowerKB Enter\n");
+
+ D0F0xBC_x3F834 = CFG_DISP_PHY_TDP_LIMIT;
+ GnbRegisterWriteKB (GnbGetHandle (StdHeader), TYPE_D0F0xBC, 0x3F834,
+ &D0F0xBC_x3F834, 0, StdHeader);
+
+ D0F0xBC_x3F838 = CFG_FCH_PWR_CREDIT;
+ GnbRegisterWriteKB (GnbGetHandle (StdHeader), TYPE_D0F0xBC, 0x3F838,
+ &D0F0xBC_x3F838, 0, StdHeader);
+
+ GnbRegisterReadKB (GnbGetHandle (StdHeader), 0x4, 0x3f844,
+ &D0F0xBC_x3F844, 0, StdHeader);
+ D0F0xBC_x3F844 &= 0xe0000000;
+ GnbRegisterWriteKB (GnbGetHandle (StdHeader), 0x4, 0x3f844,
+ &D0F0xBC_x3F844, 0, StdHeader);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbInitPkgPowerKB Exit\n");
+ return;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Request VDDB Pmin
+ *
+ *
+ *
+ * @param[in] GnbHandle GNB_HANDLE
+ * @param[in] StdHeader Standard configuration header
+ */
+
+STATIC VOID
+GnbRequestVddNbPminKB (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ D18F5x170_STRUCT D18F5x170;
+ D18F5x160_STRUCT D18F5x160;
+ UINT32 Millivolt;
+ UINT32 NbVid;
+ DEV_OBJECT DevObject;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbRequestVddNbPminKB Enter\n");
+ // 1) Read F5x170[NbPstateMaxVal] to find NB Pmin.
+ GnbRegisterReadKB (GnbHandle, D18F5x170_TYPE, D18F5x170_ADDRESS, &D18F5x170, 0, StdHeader);
+ // 2) Determine voltage associated with NB Pmin. Read F5x(160+4*NbPstateMaxVal)[NbVid]. (For example, NBP0 is F5x160, NBP1 is F5x164, etc)
+ GnbRegisterReadKB (GnbHandle, D18F5x160_TYPE, (D18F5x160_ADDRESS + (4 * D18F5x170.Field.NbPstateMaxVal)), &D18F5x160, 0, StdHeader);
+ NbVid = (D18F5x160.Field.NbVid_7_ << 7) | (D18F5x160.Field.NbVid_6_0_);
+ // 3) Make voltage request (via BIOSSMC_MSG_VDDNB_REQUEST) for voltage determined by Step 2. Note that message requires encoding in voltage, not VID.
+ // Use the following equation to decode SVI2 VIDs:
+ // Voltage = 1.55 - (0.00625*VID)
+ // Furthermore, VDDNB requests to SMU should be encoded in 0.25mV steps.
+ // Therefore, voltage should be translated into mV and then multiplied by 4, to be encoded as 0.25mV steps.
+ // Or... ( 1.55 * 1000 * 4) - (.00625 * 1000 * 4) * VID) = (1550 * 4) - (25 * VID)
+ Millivolt = (1550 * 4) - (25 * NbVid);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, " Set Voltage for NbPstateMaxVal = 0x%x, Vid code 0x%x = %d mV\n", D18F5x170.Field.NbPstateMaxVal, NbVid, Millivolt);
+ DevObject.StdHeader = StdHeader;
+ DevObject.GnbHandle = GnbHandle;
+ DevObject.DevPciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0);
+ GnbSmuServiceRequestV7 (
+ &DevObject,
+ SMC_MSG_VDDNB_REQUEST,
+ Millivolt,
+ 0
+ );
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbRequestVddNbPminKB Exit\n");
+ return;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize GFX straps.
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ */
+STATIC VOID
+GfxStrapsEarlyInitKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GnbRegistersKB7236_STRUCT v0;
+ GnbRegistersKB7269_STRUCT v1;
+ GnbRegistersKB7314_STRUCT v2;
+ GnbRegistersKB7341_STRUCT v3;
+ GNB_HANDLE *GnbHandle;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxStrapsEarlyInitKB Enter\n");
+
+ GnbHandle = GnbGetHandle (StdHeader);
+
+ GnbRegisterReadKB (GnbHandle, TYPE_D0F0xD4, 0x13014AB, &v0.Value, 0, StdHeader);
+ GnbRegisterReadKB (GnbHandle, TYPE_D0F0xD4, 0x13014AC, &v1.Value, 0, StdHeader);
+ GnbRegisterReadKB (GnbHandle, TYPE_D0F0xD4, 0x13014B6, &v2.Value, 0, StdHeader);
+ GnbRegisterReadKB (GnbHandle, TYPE_D0F0xD4, 0x013014BE, &v3.Value, 0, StdHeader);
+
+ v0.Field.bit17 = 1;
+
+ v2.Field.bita = 0x0;
+ v2.Field.StrapBifF0LegacyDeviceTypeDis = 0x0;
+
+ v1.Field.bit16 = UserOptions.CfgGnbHdAudio;
+ v2.Field.bit13 = UserOptions.CfgGnbHdAudio;
+
+ // Enable PCI Vendor Specific Capabilities
+ v3.Field.bit_20 = 1;
+
+ GnbRegisterWriteKB (GnbHandle, TYPE_D0F0xD4, 0x13014AB, &v0.Value, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+ GnbRegisterWriteKB (GnbHandle, TYPE_D0F0xD4, 0x13014AC, &v1.Value, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+ GnbRegisterWriteKB (GnbHandle, TYPE_D0F0xD4, 0x13014B6, &v2.Value, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+ GnbRegisterWriteKB (GnbHandle, TYPE_D0F0xD4, 0x013014BE, &v3.Value, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxStrapsEarlyInitKB Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable Gfx gBIF
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+STATIC AGESA_STATUS
+GfxGBifEnableKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GnbRegistersKB7208_STRUCT var0;
+ GnbRegistersKB7514_STRUCT var1;
+ UINT32 D0F0xBC_xC00C0000;
+ GNB_HANDLE *GnbHandle;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxGBifEnableKB Enter\n");
+ GnbHandle = GnbGetHandle (StdHeader);
+
+ GnbRegisterReadKB (GnbHandle, 0x4, 0xc00c0000, &D0F0xBC_xC00C0000, 0, StdHeader);
+ if (((D0F0xBC_xC00C0000 >> 1) & 1 )!= 1) {
+ GfxStrapsEarlyInitKB (StdHeader);
+ }
+
+ GnbRegisterReadKB (GnbHandle, TYPE_D0F0xD4, 0x1301486, &var0.Value, 0, StdHeader);
+ GnbRegisterReadKB (GnbHandle, TYPE_D0F0xD4, 0x1091518, &var1.Value, 0, StdHeader);
+ var0.Field.bit2 = 0x1;
+ var1.Field.bit0 = 0x1;
+ GnbRegisterWriteKB (GnbHandle, TYPE_D0F0xD4, 0x1091518, &var1.Value, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+ GnbRegisterWriteKB (GnbHandle, TYPE_D0F0xD4, 0x1301486, &var0.Value, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxGBifEnableKB Exit\n");
+
+ return AGESA_SUCCESS;
+}
+/*----------------------------------------------------------------------------------------*/
+/**
+ * GNB init at early post
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GnbEarlyInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ GNB_HANDLE *GnbHandle;
+ UINT32 Property;
+
+ AgesaStatus = AGESA_SUCCESS;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbEarlyInterfaceKB Enter\n");
+ GnbHandle = GnbGetHandle (StdHeader);
+
+ Property = TABLE_PROPERTY_DEFAULT;
+ Property |= UserOptions.CfgGnbSyncFloodPinAsNmi ? 0x00000400ul : 0;
+ Property |= GnbBuildOptions.CfgSviRevision == 2 ? TABLE_PROPERTY_SVI2 : 0;
+
+ IDS_OPTION_HOOK (IDS_GNB_PROPERTY, &Property, StdHeader);
+
+ while (GnbHandle != NULL) {
+ GnbEarlyInitKB129_fun (StdHeader);
+ GnbEarlyInitKB180_fun (StdHeader);
+ GnbInitPkgPowerKB (StdHeader);
+ Status = GnbProcessTable (
+ GnbHandle,
+ GnbEarlyInitTableKB,
+ Property,
+ 0,
+ StdHeader
+ );
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ GnbRequestVddNbPminKB (GnbHandle, StdHeader);
+ Status = GfxGBifEnableKB (StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ GnbHandle = GnbGetNextHandle (GnbHandle);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbEarlyInterfaceKB Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * GNB init at earlier post
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GnbEarlierInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ GNB_HANDLE *GnbHandle;
+
+ AgesaStatus = AGESA_SUCCESS;
+ Status = AGESA_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbEarlierInterfaceKB Enter\n");
+ GnbHandle = GnbGetHandle (StdHeader);
+ while (GnbHandle != NULL) {
+ Status = GnbProcessTable (
+ GnbHandle,
+ GnbEarlierInitTableBeforeSmuKB,
+ 0,
+ 0,
+ StdHeader
+ );
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ Status = GnbSmuFirmwareLoadV7 (GnbHandle, (FIRMWARE_HEADER_V7*) &FirmwareKB[0], StdHeader);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ GnbHandle = GnbGetNextHandle (GnbHandle);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbEarlierInterfaceKB Exit [0x%x]\n", Status);
+ return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+AGESA_STATUS
+OptionGnbInstall581 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ GNB_HANDLE *GnbHandle;
+
+ AgesaStatus = AGESA_SUCCESS;
+ Status = AGESA_SUCCESS;
+ GnbHandle = GnbGetHandle (StdHeader);
+
+ while (GnbHandle != NULL) {
+ Status = GnbSmuInitLibV7139_fun0 (GnbHandle, &excel925[0], StdHeader);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ GnbHandle = GnbGetNextHandle (GnbHandle);
+ }
+
+ return AgesaStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbEnvInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbEnvInitKB.c
new file mode 100644
index 0000000..e9f41de
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbEnvInitKB.c
@@ -0,0 +1,302 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB env post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85506 $ @e \$Date: 2013-01-08 15:38:33 -0600 (Tue, 08 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "Gnb.h"
+#include "GnbCommonLib.h"
+#include "GnbTable.h"
+#include "GnbPcieConfig.h"
+#include "GnbSmuInitLibV7.h"
+#include "GnbNbInitLibV1.h"
+#include "GnbNbInitLibV4.h"
+#include "GnbNbInitLibV5.h"
+#include "GnbF1TableKB.h"
+#include "GnbF1Table.h"
+#include "GnbRegistersKB.h"
+#include "GnbRegisterAccKB.h"
+#include "OptionGnb.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GNBENVINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+extern GNB_TABLE ROMDATA GnbEnvInitTableKB [];
+extern GNB_TABLE ROMDATA GnbIommuInitTableKB [];
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GnbEnvInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * NB Dynamic Wake
+ * ORB_CNB_Wake signal is used to inform the CNB NCLK controller and GNB LCLK controller
+ * that ORB is (or will soon) push data into the synchronizer FIFO (i.e. wake is high).
+ *
+ * @param[in] NbPciAddress Gnb PCI address
+ * @param[in] StdHeader Standard Configuration Header
+ */
+
+VOID
+STATIC
+GnbOrbDynamicWakeKB (
+ IN PCI_ADDR NbPciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ D0F0x98_x2C_STRUCT D0F0x98_x2C;
+
+ GnbLibPciIndirectRead (
+ NbPciAddress.AddressValue | D0F0x94_ADDRESS,
+ D0F0x98_x2C_ADDRESS,
+ AccessWidth32,
+ &D0F0x98_x2C.Value,
+ StdHeader
+ );
+
+ // Enable Dynamic wake
+ // Wake Hysteresis timer value. Specifies the number of SMU pulses to count.
+ if (GnbBuildOptions.CfgOrbDynWakeEnable) {
+ D0F0x98_x2C.Field.DynWakeEn = 1;
+ } else {
+ D0F0x98_x2C.Field.DynWakeEn = 0;
+ }
+ D0F0x98_x2C.Field.WakeHysteresis = 0x19;
+
+ IDS_OPTION_HOOK (IDS_GNB_ORBDYNAMIC_WAKE, &D0F0x98_x2C, StdHeader);
+
+ GnbLibPciIndirectWrite (
+ NbPciAddress.AddressValue | D0F0x94_ADDRESS,
+ D0F0x98_x2C_ADDRESS,
+ AccessS3SaveWidth32,
+ &D0F0x98_x2C.Value,
+ StdHeader
+ );
+}
+/*----------------------------------------------------------------------------------------*/
+/**
+ * HTC Data
+ *
+ * @param[in] GnbHandle Gnb Header
+ * @param[in] StdHeader Standard Configuration Header
+ */
+
+VOID
+STATIC
+GnbFillHtcData (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ UINT32 D0F0xBC_x3FDD4;
+ D18F3x64_STRUCT D18F3x64;
+ UINT16 *p = (UINT16 *)&D0F0xBC_x3FDD4;
+ GnbRegisterReadKB (GnbHandle, D18F3x64_TYPE, D18F3x64_ADDRESS,
+ &D18F3x64.Value, 0, StdHeader);
+
+ GnbRegisterReadKB (GnbHandle, 0x4, 0x3fdd4,
+ &D0F0xBC_x3FDD4, 0, StdHeader);
+
+ if (D18F3x64.Field.HtcEn == 1) {
+
+ p[1] = D18F3x64.Field.HtcTmpLmt / 2 + 52;
+ p[0] =
+ p[1] - (D18F3x64.Field.HtcHystLmt / 2);
+
+ p[1] =
+ (p[1] + 49) << 3;
+ p[0] =
+ (p[0] + 49) << 3;
+
+ } else {
+
+ p[0] = 0;
+ p[1] = 0;
+
+ }
+
+
+ GnbRegisterWriteKB (GnbHandle, 0x4,
+ 0x3fdd4, &D0F0xBC_x3FDD4, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * LHTC Data
+ *
+ * @param[in] GnbHandle Gnb Header
+ * @param[in] StdHeader Standard Configuration Header
+ */
+
+VOID
+STATIC
+GnbUpdateLhtcData (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AMD_ENV_PARAMS *EnvParams;
+ UINT32 LhtcParameter;
+ D18F3x64_STRUCT D18F3x64;
+ UINT32 D0F0xBC_xC0104090;
+ DEV_OBJECT DevObject;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbUpdateLhtcData Enter\n");
+ EnvParams = (AMD_ENV_PARAMS *) StdHeader;
+
+ // Make sure both config values are valid
+ if ((EnvParams->PlatformConfig.LhtcTemperatureLimit >= 520) && (EnvParams->PlatformConfig.HtcTemperatureLimit >= 520)) {
+ // Platform config value is in .1 degrees
+ LhtcParameter = (EnvParams->PlatformConfig.LhtcTemperatureLimit - 520) / 5;
+ // Read HtcTmpLmt field from D18F3
+ GnbRegisterReadKB (GnbGetHandle (StdHeader), D18F3x64_TYPE, D18F3x64_ADDRESS, &D18F3x64.Value, 0, StdHeader);
+ GnbRegisterReadKB (GnbGetHandle (StdHeader), 0x4, 0xC0104090, &D0F0xBC_xC0104090, 0, StdHeader);
+ if ((D18F3x64.Field.HtcEn == 1) && (LhtcParameter < D18F3x64.Field.HtcTmpLmt) && (LhtcParameter < ((D0F0xBC_xC0104090 >> 23) & 0xFF))) {
+ // All values are valid, so we can send the service to the SMU
+ DevObject.StdHeader = StdHeader;
+ DevObject.GnbHandle = GnbGetHandle (StdHeader);
+ DevObject.DevPciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0);
+ GnbSmuServiceRequestV7 (
+ &DevObject,
+ SMC_MSG_LHTC_LIMIT_SetLimit,
+ LhtcParameter,
+ GNB_REG_ACC_FLAG_S3SAVE
+ );
+ }
+ }
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbUpdateLhtcData Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * GNB init at env
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GnbEnvInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ UINT32 Property;
+ GNB_HANDLE *GnbHandle;
+ PCI_ADDR GnbPciAddress;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbEnvInterfaceKB Enter\n");
+ Property = TABLE_PROPERTY_DEFAULT;
+ Property |= GnbBuildOptions.CfgBapmSupport ? TABLE_PROPERTY_BAPM : 0;
+ Property |= GnbBuildOptions.CfgLhtcSupport ? TABLE_PROPERTY_LHTC : 0;
+ Property |= GnbBuildOptions.CfgTdcSupport ? 0x00040000ul : 0;
+ Property |= 0x00080000ul;
+ AgesaStatus = AGESA_SUCCESS;
+ GnbLoadF1TableKB (StdHeader);
+ GnbHandle = GnbGetHandle (StdHeader);
+ while (GnbHandle != NULL) {
+ GnbPciAddress = GnbGetHostPciAddress (GnbHandle);
+ Status = GnbSetTomV5 (GnbPciAddress, StdHeader);
+ GnbOrbDynamicWakeKB (GnbPciAddress, StdHeader);
+ GnbFillHtcData (GnbHandle, StdHeader);
+ if (GnbIsGnbConnectedToSb (GnbHandle)) {
+ GnbLpcDmaDeadlockPreventionV4 (GnbHandle, StdHeader);
+ }
+
+ IDS_OPTION_HOOK (IDS_GNB_PROPERTY, &Property, StdHeader);
+
+ Status = GnbProcessTable (
+ GnbHandle,
+ GnbEnvInitTableKB,
+ Property,
+ GNB_TABLE_FLAGS_FORCE_S3_SAVE,
+ StdHeader
+ );
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ if ((Property & TABLE_PROPERTY_LHTC) != 0) {
+ GnbUpdateLhtcData (GnbHandle, StdHeader);
+ }
+
+ Status = GnbProcessTable (
+ GnbHandle,
+ GnbIommuInitTableKB,
+ Property,
+ GNB_TABLE_FLAGS_FORCE_S3_SAVE,
+ StdHeader
+ );
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ GnbHandle = GnbGetNextHandle (GnbHandle);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbEnvInterfaceKB Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbF1TableKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbF1TableKB.c
new file mode 100644
index 0000000..41b7b17
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbF1TableKB.c
@@ -0,0 +1,1022 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Gnb f1 table
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84159 $ @e \$Date: 2011-12-21 14:49:48 -0600 (Wed, 21 Dec 2011) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "Gnb.h"
+#include "GnbGfxFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbF1Table.h"
+#include "GnbF1TableKB.h"
+#include "GnbRegistersKB.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbHandleLib.h"
+#include "OptionGnb.h"
+#include "Filecode.h"
+//#define FILECODE PROC_GNB_MODULES_GNBINITKB_GNBFUSETABLEKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+
+PP_F1_ARRAY_V2 DefaultPpF1ArrayKB = {
+ 0,
+ {0x40, 0, 0, 0, 0},
+ {0x40, 0, 0, 0, 0},
+ 8,
+ {0, 0, 0, 0, 0, 0},
+ {0x40, 0x40, 0x40, 0, 0},
+ {0, 0, 0, 0, 0},
+ 3,
+ 0x10,
+ 0,
+ 0,
+ 0,
+ 0,
+ TRUE,
+ {0x3, 0xC, 0x30, 0xC0},
+ 0,
+ {0, 0, 0, 0},
+ {0x40, 0x40, 0x40, 0x40, 0},
+ 0,
+ 0,
+ 0,
+ 0,
+ { 1, 1, 1, 1},
+ { 0, 0, 0, 0},
+ { 2, 2, 2, 2},
+ { 0, 0, 0, 0},
+ { 0, 0, 0, 0},
+ { 0, 0, 0, 0},
+ { 0, 0, 0, 0},
+ { 0, 0, 0, 0},
+ { 0, 0, 0, 0},
+ { 1, 1, 1, 1},
+ { 0x24, 0x24, 0x24, 0x24, 0x24 },
+ { 0x17, 0x18, 0x20, 0x22, 0x24 },
+ { 0x17, 0x18, 0x20, 0x22, 0x24 },
+ { 0x1, 0x2, 0x3, 0x4, 0x5 },
+ 0x1E,
+ 0x3
+};
+
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0104007_TABLE [] = {
+ {
+ 5,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld32[0])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0104008_TABLE [] = {
+ {
+ 5,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld32[1])
+ },
+ {
+ 13,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld32[2])
+ },
+ {
+ 21,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld32[3])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC010400C_TABLE [] = {
+ {
+ 25,
+ 6,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld21)
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC010407C_TABLE [] = {
+ {
+ 20,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld32[4])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0104080_TABLE [] = {
+ {
+ 21,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, VceFlags[0])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0104083_TABLE [] = {
+ {
+ 5,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, VceFlags[1])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0104084_TABLE [] = {
+ {
+ 5,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, VceFlags[2])
+ },
+ {
+ 13,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, VceFlags[3])
+ },
+ {
+ 29,
+ 3,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld16[0])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0104088_TABLE [] = {
+ {
+ 0,
+ 3,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld16[1])
+ },
+ {
+ 3,
+ 3,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld16[2])
+ },
+ {
+ 6,
+ 3,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld16[3])
+ },
+ {
+ 12,
+ 5,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, VceMclk)
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC01040A8_TABLE [] = {
+ {
+ 16,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld35[0])
+ },
+ {
+ 24,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld35[1])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC01040AC_TABLE [] = {
+ {
+ 0,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld35[2])
+ },
+ {
+ 8,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld35[3])
+ },
+ {
+ 16,
+ 8,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld35[4])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0107044_TABLE [] = {
+ {
+ 16,
+ 3,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld36)
+ },
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0107064_TABLE [] = {
+ {
+ 0,
+ 4,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PPlayTableRev)
+ },
+ {
+ 4,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld3)
+ },
+ {
+ 11,
+ 3,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PcieGen2Vid)
+ },
+ {
+ 17,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld33[0])
+ },
+ {
+ 24,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld33[1])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0107067_TABLE [] = {
+ {
+ 7,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld33[2])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0107068_TABLE [] = {
+ {
+ 6,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld33[3])
+ },
+ {
+ 13,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld33[4])
+ },
+ {
+ 20,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, excel841_fld6[0])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC010706B_TABLE [] = {
+ {
+ 3,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, excel841_fld6[1])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC010706C_TABLE [] = {
+ {
+ 2,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, excel841_fld6[2])
+ },
+ {
+ 9,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, excel841_fld6[3])
+ },
+ {
+ 16,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, excel841_fld6[4])
+ },
+ {
+ 23,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld5[0])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC010706F_TABLE [] = {
+ {
+ 6,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld5[1])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0107070_TABLE [] = {
+ {
+ 5,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld5[2])
+ },
+ {
+ 12,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld5[3])
+ },
+ {
+ 19,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld5[4])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0107073_TABLE [] = {
+ {
+ 2,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld2[0])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0107074_TABLE [] = {
+ {
+ 1,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld2[1])
+ },
+ {
+ 8,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld2[2])
+ },
+ {
+ 15,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld2[3])
+ },
+ {
+ 22,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld2[4])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0107077_TABLE [] = {
+ {
+ 5,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld1[0])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0107078_TABLE [] = {
+ {
+ 4,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld1[1])
+ },
+ {
+ 11,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld1[2])
+ },
+ {
+ 18,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld1[3])
+ },
+ {
+ 25,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld1[4])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC010707C_TABLE [] = {
+ {
+ 0,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, EclkDid[0])
+ },
+ {
+ 7,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, EclkDid[1])
+ },
+ {
+ 14,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, EclkDid[2])
+ },
+ {
+ 21,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, EclkDid[3])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC010707F_TABLE [] = {
+ {
+ 4,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, EclkDid[4])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0107080_TABLE [] = {
+ {
+ 3,
+ 5,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld37)
+ },
+ {
+ 8,
+ 5,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld38)
+ },
+ {
+ 13,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld34[0])
+ },
+ {
+ 20,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld34[1])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0107083_TABLE [] = {
+ {
+ 3,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld34[2])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D0F0xBC_xC0107084_TABLE [] = {
+ {
+ 2,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld34[3])
+ },
+ {
+ 9,
+ 7,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld34[4])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D18F3x64_TABLE [] = {
+ {
+ D18F3x64_HtcEn_OFFSET,
+ D18F3x64_HtcEn_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, HtcEn)
+ },
+ {
+ D18F3x64_HtcTmpLmt_OFFSET,
+ D18F3x64_HtcTmpLmt_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, HtcTmpLmt)
+ },
+ {
+ D18F3x64_HtcHystLmt_OFFSET,
+ D18F3x64_HtcHystLmt_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld20)
+ }
+};
+
+F1_REGISTER_ENTRY_KB GnbFuseTableKB565_TABLE [] = {
+ {
+ 1,
+ 6,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld21)
+ }
+};
+
+F1_REGISTER_ENTRY_KB D18F2x90_dct0_TABLE [] = {
+ {
+ D18F2x90_dct0_DisDllShutdownSR_OFFSET,
+ D18F2x90_dct0_DisDllShutdownSR_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, DisDllShutdownSR[0])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D18F2x94_dct0_TABLE [] = {
+ {
+ D18F2x94_dct0_MemClkFreq_OFFSET,
+ D18F2x94_dct0_MemClkFreq_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, MemClkFreq[0])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D18F2xA8_dct0_TABLE [] = {
+ {
+ D18F2xA8_dct0_MemPhyPllPdMode_OFFSET,
+ D18F2xA8_dct0_MemPhyPllPdMode_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, MemPhyPllPdMode[0])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D18F2x2E0_dct0_TABLE [] = {
+ {
+ D18F2x2E0_dct0_M1MemClkFreq_OFFSET,
+ D18F2x2E0_dct0_M1MemClkFreq_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, M1MemClkFreq[0])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D18F5x160_TABLE [] = {
+ {
+ D18F5x160_NbPstateEn_OFFSET,
+ D18F5x160_NbPstateEn_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld26[0])
+ },
+ {
+ D18F5x160_MemPstate_OFFSET,
+ D18F5x160_MemPstate_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld29[0])
+ },
+ {
+ D18F5x160_NbFid_OFFSET,
+ D18F5x160_NbFid_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld30[0])
+ },
+ {
+ D18F5x160_NbDid_OFFSET,
+ D18F5x160_NbDid_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld31[0])
+ },
+ {
+ D18F5x160_NbVid_6_0_OFFSET,
+ D18F5x160_NbVid_6_0_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld27[0])
+ },
+ {
+ D18F5x160_NbVid_7_OFFSET,
+ D18F5x160_NbVid_7_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld28[0])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D18F5x164_TABLE [] = {
+ {
+ D18F5x164_NbPstateEn_OFFSET,
+ D18F5x164_NbPstateEn_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld26[1])
+ },
+ {
+ D18F5x164_MemPstate_OFFSET,
+ D18F5x164_MemPstate_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld29[1])
+ },
+ {
+ D18F5x164_NbFid_OFFSET,
+ D18F5x164_NbFid_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld30[1])
+ },
+ {
+ D18F5x164_NbDid_OFFSET,
+ D18F5x164_NbDid_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld31[1])
+ },
+ {
+ D18F5x164_NbVid_6_0_OFFSET,
+ D18F5x164_NbVid_6_0_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld27[1])
+ },
+ {
+ D18F5x164_NbVid_7_OFFSET,
+ D18F5x164_NbVid_7_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld28[1])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D18F5x168_TABLE [] = {
+ {
+ D18F5x168_NbPstateEn_OFFSET,
+ D18F5x168_NbPstateEn_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld26[2])
+ },
+ {
+ D18F5x168_MemPstate_OFFSET,
+ D18F5x168_MemPstate_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld29[2])
+ },
+ {
+ D18F5x168_NbFid_OFFSET,
+ D18F5x168_NbFid_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld30[2])
+ },
+ {
+ D18F5x168_NbDid_OFFSET,
+ D18F5x168_NbDid_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld31[2])
+ },
+ {
+ D18F5x168_NbVid_6_0_OFFSET,
+ D18F5x168_NbVid_6_0_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld27[2])
+ },
+ {
+ D18F5x168_NbVid_7_OFFSET,
+ D18F5x168_NbVid_7_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld28[2])
+ }
+};
+
+F1_REGISTER_ENTRY_KB D18F5x16C_TABLE [] = {
+ {
+ D18F5x16C_NbPstateEn_OFFSET,
+ D18F5x16C_NbPstateEn_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld26[3])
+ },
+ {
+ D18F5x16C_MemPstate_OFFSET,
+ D18F5x16C_MemPstate_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld29[3])
+ },
+ {
+ D18F5x16C_NbFid_OFFSET,
+ D18F5x16C_NbFid_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld30[3])
+ },
+ {
+ D18F5x16C_NbDid_OFFSET,
+ D18F5x16C_NbDid_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld31[3])
+ },
+ {
+ D18F5x16C_NbVid_6_0_OFFSET,
+ D18F5x16C_NbVid_6_0_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld27[3])
+ },
+ {
+ D18F5x16C_NbVid_7_OFFSET,
+ D18F5x16C_NbVid_7_WIDTH,
+ (UINT16) offsetof (PP_F1_ARRAY_V2, PP_FUSE_ARRAY_V2_fld28[3])
+ }
+};
+
+
+F1_TABLE_ENTRY_KB F1RegisterTableKB [] = {
+
+ {
+ 0x4,
+ 0xC0104007,
+ sizeof (D0F0xBC_xC0104007_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0104007_TABLE
+ },
+ {
+ 0x4,
+ 0xC0104008,
+ sizeof (D0F0xBC_xC0104008_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0104008_TABLE
+ },
+ {
+ 0x4,
+ 0xC010400c,
+ sizeof (D0F0xBC_xC010400C_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC010400C_TABLE
+ },
+ {
+ 0x4,
+ 0xC010407c,
+ sizeof (D0F0xBC_xC010407C_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC010407C_TABLE
+ },
+ {
+ 0x4,
+ 0xC0104080,
+ sizeof (D0F0xBC_xC0104080_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0104080_TABLE
+ },
+ {
+ 0x4,
+ 0xC0104083,
+ sizeof (D0F0xBC_xC0104083_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0104083_TABLE
+ },
+ {
+ 0x4,
+ 0xC0104084,
+ sizeof (D0F0xBC_xC0104084_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0104084_TABLE
+ },
+ {
+ 0x4,
+ 0xC0104088,
+ sizeof (D0F0xBC_xC0104088_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0104088_TABLE
+ },
+ {
+ 0x4,
+ 0xC01040a8,
+ sizeof (D0F0xBC_xC01040A8_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC01040A8_TABLE
+ },
+ {
+ 0x4,
+ 0xC01040ac,
+ sizeof (D0F0xBC_xC01040AC_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC01040AC_TABLE
+ },
+ {
+ 0x4,
+ 0xC0107044,
+ sizeof (D0F0xBC_xC0107044_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0107044_TABLE
+ },
+ {
+ 0x4,
+ 0xC0107064,
+ sizeof (D0F0xBC_xC0107064_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0107064_TABLE
+ },
+ {
+ 0x4,
+ 0xC0107067,
+ sizeof (D0F0xBC_xC0107067_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0107067_TABLE
+ },
+ {
+ 0x4,
+ 0xC0107068,
+ sizeof (D0F0xBC_xC0107068_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0107068_TABLE
+ },
+ {
+ 0x4,
+ 0xC010706b,
+ sizeof (D0F0xBC_xC010706B_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC010706B_TABLE
+ },
+ {
+ 0x4,
+ 0xC010706c,
+ sizeof (D0F0xBC_xC010706C_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC010706C_TABLE
+ },
+ {
+ 0x4,
+ 0xC010706f,
+ sizeof (D0F0xBC_xC010706F_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC010706F_TABLE
+ },
+ {
+ 0x4,
+ 0xC0107070,
+ sizeof (D0F0xBC_xC0107070_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0107070_TABLE
+ },
+ {
+ 0x4,
+ 0xC0107073,
+ sizeof (D0F0xBC_xC0107073_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0107073_TABLE
+ },
+ {
+ 0x4,
+ 0xC0107074,
+ sizeof (D0F0xBC_xC0107074_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0107074_TABLE
+ },
+ {
+ 0x4,
+ 0xC0107077,
+ sizeof (D0F0xBC_xC0107077_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0107077_TABLE
+ },
+ {
+ 0x4,
+ 0xC0107078,
+ sizeof (D0F0xBC_xC0107078_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0107078_TABLE
+ },
+ {
+ 0x4,
+ 0xC010707c,
+ sizeof (D0F0xBC_xC010707C_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC010707C_TABLE
+ },
+ {
+ 0x4,
+ 0xC0107080,
+ sizeof (D0F0xBC_xC0107080_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0107080_TABLE
+ },
+ {
+ 0x4,
+ 0xC0107083,
+ sizeof (D0F0xBC_xC0107083_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0107083_TABLE
+ },
+ {
+ 0x4,
+ 0xC0107084,
+ sizeof (D0F0xBC_xC0107084_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D0F0xBC_xC0107084_TABLE
+ }
+};
+
+F1_TABLE_ENTRY_KB PPRegisterTableKB [] = {
+ {
+ D18F3x64_TYPE,
+ D18F3x64_ADDRESS,
+ sizeof (D18F3x64_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D18F3x64_TABLE
+ },
+ {
+ 0x4,
+ 0xC0500000,
+ sizeof (GnbFuseTableKB565_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ GnbFuseTableKB565_TABLE
+ },
+ {
+ D18F2x90_dct0_TYPE,
+ D18F2x90_dct0_ADDRESS,
+ sizeof (D18F2x90_dct0_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D18F2x90_dct0_TABLE
+ },
+ {
+ D18F2x94_dct0_TYPE,
+ D18F2x94_dct0_ADDRESS,
+ sizeof (D18F2x94_dct0_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D18F2x94_dct0_TABLE
+ },
+ {
+ D18F2xA8_dct0_TYPE,
+ D18F2xA8_dct0_ADDRESS,
+ sizeof (D18F2xA8_dct0_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D18F2xA8_dct0_TABLE
+ },
+ {
+ D18F5x160_TYPE,
+ D18F5x160_ADDRESS,
+ sizeof (D18F5x160_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D18F5x160_TABLE
+ },
+ {
+ D18F5x164_TYPE,
+ D18F5x164_ADDRESS,
+ sizeof (D18F5x164_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D18F5x164_TABLE
+ },
+ {
+ D18F5x168_TYPE,
+ D18F5x168_ADDRESS,
+ sizeof (D18F5x168_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D18F5x168_TABLE
+ },
+ {
+ D18F5x16C_TYPE,
+ D18F5x16C_ADDRESS,
+ sizeof (D18F5x16C_TABLE) / sizeof (F1_REGISTER_ENTRY_KB),
+ D18F5x16C_TABLE
+ }
+};
+
+
+F1_TABLE_KB F1TableKB = {
+ sizeof (F1RegisterTableKB) / sizeof (F1_TABLE_ENTRY_KB),
+ F1RegisterTableKB
+};
+
+F1_TABLE_KB PPTableKB = {
+ sizeof (PPRegisterTableKB) / sizeof (F1_TABLE_ENTRY_KB),
+ PPRegisterTableKB
+};
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Load F1 Table KB
+ *
+ *
+ * param[out] PpF1Array Pointer to save f1 table
+ * param[in] StdHeader Pointer to Standard configuration
+ * retval AGESA_STATUS
+ */
+
+STATIC VOID
+NbF1LoadF1TableKB (
+ IN F1_TABLE_KB *F1Table,
+ OUT PP_F1_ARRAY_V2 *PpF1Array,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINTN RegisterIndex;
+
+ for (RegisterIndex = 0; RegisterIndex < F1Table->F1TableLength; RegisterIndex++ ) {
+ UINTN FieldIndex;
+ UINTN F1RegisterTableLength;
+ UINT32 F1Value;
+ F1RegisterTableLength = F1Table->F1Table[RegisterIndex].F1RegisterTableLength;
+
+ GnbRegisterReadKB (
+ GnbGetHandle (StdHeader),
+ F1Table->F1Table[RegisterIndex].RegisterSpaceType,
+ F1Table->F1Table[RegisterIndex].Register,
+ &F1Value,
+ 0,
+ StdHeader
+ );
+ for (FieldIndex = 0; FieldIndex < F1RegisterTableLength; FieldIndex++) {
+ F1_REGISTER_ENTRY_KB RegisterEntry;
+ RegisterEntry = F1Table->F1Table[RegisterIndex].F1RegisterTable[FieldIndex];
+ *((UINT8 *) PpF1Array + RegisterEntry.F1Offset) = (UINT8) ((F1Value >> RegisterEntry.FieldOffset) &
+ ((1 << RegisterEntry.FieldWidth) - 1));
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Gnb load f1 table
+ *
+ *
+ *
+ * @param[in] StdHeader Pointer to Standard configuration
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GnbLoadF1TableKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PP_F1_ARRAY_V2 *PpF1Array;
+ AGESA_STATUS Status;
+ D18F3xA0_STRUCT D18F3xA0;
+
+ Status = AGESA_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbLoadF1TableKB Enter\n");
+
+ PpF1Array = (PP_F1_ARRAY_V2 *) GnbAllocateHeapBuffer (AMD_PP_F1_TABLE_HANDLE, sizeof (PP_F1_ARRAY_V2), StdHeader);
+ ASSERT (PpF1Array != NULL);
+ if (PpF1Array != NULL) {
+ //Support for real f1 table
+ GnbRegisterReadKB (GnbGetHandle (StdHeader), D18F3xA0_TYPE, D18F3xA0_ADDRESS, &D18F3xA0.Value, 0, StdHeader);
+
+ if ((D18F3xA0.Field.CofVidProg) && (GnbBuildOptions.GnbLoadRealF1Table)) {
+ NbF1LoadF1TableKB (&F1TableKB, PpF1Array, StdHeader);
+ PpF1Array->PP_FUSE_ARRAY_V2_fld13 = TRUE;
+ IDS_HDT_CONSOLE (NB_MISC, " Processor F1d\n");
+ } else {
+ LibAmdMemCopy (PpF1Array, &DefaultPpF1ArrayKB, sizeof (PP_F1_ARRAY_V2), StdHeader);
+ IDS_HDT_CONSOLE (NB_MISC, " Processor Unf1d\n");
+ }
+ NbF1LoadF1TableKB (&PPTableKB, PpF1Array, StdHeader);
+ IDS_OPTION_CALLOUT (IDS_CALLOUT_GNB_PPF1_OVERRIDE, PpF1Array, StdHeader);
+ } else {
+ Status = AGESA_ERROR;
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbLoadF1TableKB Exit [0x%x]\n", Status);
+ return Status;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbF1TableKB.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbF1TableKB.h
new file mode 100644
index 0000000..8ea51d0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbF1TableKB.h
@@ -0,0 +1,78 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * F1 table initialization
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBF1TABLEKB_H_
+#define _GNBF1TABLEKB_H_
+
+#pragma pack (push, 1)
+
+/// F1 field entry
+typedef struct {
+ UINT8 FieldOffset; ///< Field offset in f1 register
+ UINT8 FieldWidth; ///< Width of field
+ UINT16 F1Offset; ///< destination offset in translation table
+} F1_REGISTER_ENTRY_KB;
+
+/// F1 register entry
+typedef struct {
+ UINT8 RegisterSpaceType; ///< Register type
+ UINT32 Register; ///< FCR register address
+ UINT8 F1RegisterTableLength; ///< Length of field table for this register
+ F1_REGISTER_ENTRY_KB *F1RegisterTable; ///< Pointer to field table
+} F1_TABLE_ENTRY_KB;
+
+/// F1 translation table
+typedef struct {
+ UINT8 F1TableLength; ///< Length of translation table
+ F1_TABLE_ENTRY_KB *F1Table; ///< Pointer to register table
+} F1_TABLE_KB;
+
+#pragma pack (pop)
+
+AGESA_STATUS
+GnbLoadF1TableKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbInitKBInstall.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbInitKBInstall.h
new file mode 100644
index 0000000..47b8fd5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbInitKBInstall.h
@@ -0,0 +1,234 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * KB service installation file
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 86079 $ @e \$Date: 2013-01-16 00:59:04 -0600 (Wed, 16 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNB_INIT_KB_INSTALL_H_
+#define _GNB_INIT_KB_INSTALL_H_
+
+//-----------------------------------------------------------------------
+// Specify definition used by module services
+//-----------------------------------------------------------------------
+
+#include "GnbPcie.h"
+#include "GnbUraServices.h"
+#include "GnbPcieFamServices.h"
+#include "GnbFamServices.h"
+#include "GnbGfxFamServices.h"
+
+//-----------------------------------------------------------------------
+// Export services
+//-----------------------------------------------------------------------
+
+#if (AGESA_ENTRY_INIT_EARLY == TRUE)
+
+ extern F_PCIEFMGETSBCONFIGINFO PcieGetSbConfigInfoKB;
+ extern F_PCIEFMGETCOMPLEXDATALENGTH PcieGetComplexDataLengthKB;
+ extern F_PCIEFMBUILDCOMPLEXCONFIGURATION PcieBuildComplexConfigurationKB;
+ extern F_PCIEFMCONFIGUREENGINESLANEALLOCATION PcieConfigureEnginesLaneAllocationKB;
+ extern F_PCIEFMCHECKPORTPCIDEVICEMAPPING PcieCheckPortPciDeviceMappingKB;
+ extern F_PCIEFMMAPPORTPCIADDRESS PcieMapPortPciAddressKB;
+ extern F_PCIEFMCHECKPORTPCIELANECANBEMUXED PcieCheckPortPcieLaneCanBeMuxedKB;
+
+
+ PCIe_FAM_CONFIG_SERVICES GnbPcieConfigProtocolKB = {
+ PcieGetComplexDataLengthKB,
+ PcieBuildComplexConfigurationKB,
+ PcieConfigureEnginesLaneAllocationKB,
+ PcieCheckPortPciDeviceMappingKB,
+ PcieMapPortPciAddressKB,
+ PcieCheckPortPcieLaneCanBeMuxedKB,
+ PcieGetSbConfigInfoKB
+ };
+
+ GNB_SERVICE GnbPcieCongigServicesKB = {
+ GnbPcieFamConfigService,
+ AMD_FAMILY_KB,
+ &GnbPcieConfigProtocolKB,
+ SERVICES_POINTER
+ };
+ #undef SERVICES_POINTER
+ #define SERVICES_POINTER &GnbPcieCongigServicesKB
+#endif
+
+#if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_MID == TRUE)
+ extern F_PCIEFMGETCORECONFIGURATIONVALUE PcieGetCoreConfigurationValueKB;
+ extern F_PCIEFMGETLINKSPEEDCAP PcieGetLinkSpeedCapKB;
+ extern F_PCIEFMGETNATIVEPHYLANEBITMAP PcieGetNativePhyLaneBitmapKB;
+ extern F_PCIEFMSETLINKSPEEDCAP PcieSetLinkSpeedCapV4;
+
+ PCIe_FAM_INIT_SERVICES GnbPcieInitProtocolKB = {
+ PcieGetCoreConfigurationValueKB,
+ PcieGetLinkSpeedCapKB,
+ PcieGetNativePhyLaneBitmapKB,
+ PcieSetLinkSpeedCapV4
+ };
+
+ GNB_SERVICE GnbPcieInitServicesKB = {
+ GnbPcieFamInitService,
+ AMD_FAMILY_KB,
+ &GnbPcieInitProtocolKB,
+ SERVICES_POINTER
+ };
+ #undef SERVICES_POINTER
+ #define SERVICES_POINTER &GnbPcieInitServicesKB
+#endif
+
+#if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_MID == TRUE)
+ #if IDSOPT_IDS_ENABLED == TRUE
+ #if IDSOPT_TRACING_ENABLED == TRUE
+ extern F_PCIEFMDEBUGGETHOSTREGADDRESSSPACESTRING PcieDebugGetHostRegAddressSpaceStringKB;
+ extern F_PCIEFMDEBUGGETWRAPPERNAMESTRING PcieDebugGetWrapperNameStringKB;
+ extern F_PCIEFMDEBUGGETCORECONFIGURATIONSTRING PcieDebugGetCoreConfigurationStringKB;
+
+ PCIe_FAM_DEBUG_SERVICES GnbPcieDebugProtocolKB = {
+ PcieDebugGetHostRegAddressSpaceStringKB,
+ PcieDebugGetWrapperNameStringKB,
+ PcieDebugGetCoreConfigurationStringKB
+ };
+
+ GNB_SERVICE GnbPcieDebugServicesKB = {
+ GnbPcieFamDebugService,
+ AMD_FAMILY_KB,
+ &GnbPcieDebugProtocolKB,
+ SERVICES_POINTER
+ };
+ #undef SERVICES_POINTER
+ #define SERVICES_POINTER &GnbPcieDebugServicesKB
+ #endif
+ #endif
+#endif
+
+#if (AGESA_ENTRY_INIT_EARLY == TRUE) || (AGESA_ENTRY_INIT_POST == TRUE) || (AGESA_ENTRY_INIT_MID == TRUE) || (AGESA_ENTRY_INIT_LATE == TRUE)
+ extern F_GNB_REGISTER_ACCESS GnbRegisterReadKB;
+ extern F_GNB_REGISTER_ACCESS GnbRegisterWriteKB;
+
+ GNB_REGISTER_SERVICE GnbRegisterAccessProtocolKB = {
+ GnbRegisterReadKB,
+ GnbRegisterWriteKB
+ };
+
+ GNB_SERVICE GnbRegisterAccessServicesKB = {
+ GnbRegisterAccessService,
+ AMD_FAMILY_KB,
+ &GnbRegisterAccessProtocolKB,
+ SERVICES_POINTER
+ };
+ #undef SERVICES_POINTER
+ #define SERVICES_POINTER &GnbRegisterAccessServicesKB
+
+ extern F_GNBURASERVICELOCATEREGTBL GnbUraLocateRegTblKB;
+ extern F_GNBURASERVICEGET GnbUraGetKB;
+ extern F_GNBURASERVICESET GnbUraSetKB;
+ extern F_GNBURASERVICESTREAMSET GnbUraStreamSetKB;
+
+ GNB_URA_SERVICE GnbUraProtocolKB = {
+ GnbUraLocateRegTblKB,
+ GnbUraGetKB,
+ GnbUraSetKB,
+ GnbUraStreamSetKB
+ };
+
+ GNB_SERVICE GnbUraServicesKB = {
+ GnbUraService,
+ AMD_FAMILY_KB,
+ &GnbUraProtocolKB,
+ SERVICES_POINTER
+ };
+ #undef SERVICES_POINTER
+ #define SERVICES_POINTER &GnbUraServicesKB
+
+ extern F_GFXMAPENGINETODISPLAYPATH GfxMapEngineToDisplayPathKB;
+ extern F_GFXDISABLECONTROLLER GfxDisableControllerKB;
+ extern F_GFXCALCULATECLOCK GfxCalculateClockKB;
+ extern F_GFXISVBIOSPOSTED GfxIsVbiosPostedKB;
+
+ GFX_FAM_SERVICES GfxFamilyServiceProtocolKB = {
+ GfxMapEngineToDisplayPathKB,
+ GfxDisableControllerKB,
+ GfxCalculateClockKB,
+ GfxIsVbiosPostedKB
+ };
+
+ GNB_SERVICE GfxFamilyServicesKB = {
+ GfxFamService,
+ AMD_FAMILY_KB,
+ &GfxFamilyServiceProtocolKB,
+ SERVICES_POINTER
+ };
+ #undef SERVICES_POINTER
+ #define SERVICES_POINTER &GfxFamilyServicesKB
+
+ extern F_GNBTIMESTAMP GnbTimeStampKB;
+
+ GNB_FAM_TS_SERVICES GnbFamTsProtocolKB = {
+ GnbTimeStampKB,
+ };
+
+ GNB_SERVICE GnbFamTsServicesKB = {
+ GnbFamTsService,
+ AMD_FAMILY_KB,
+ &GnbFamTsProtocolKB,
+ SERVICES_POINTER
+ };
+ #undef SERVICES_POINTER
+ #define SERVICES_POINTER &GnbFamTsServicesKB
+
+
+ extern F_PCIE_MAXPAYLOAD_SETTING PcieMaxPayloadKB;
+
+ PCIE_MAXPAYLOAD_SERVICE PcieMaxPayloadProtocolKB = {
+ PcieMaxPayloadKB
+ };
+
+ GNB_SERVICE PcieMaxPayloadServicesKB = {
+ GnbPcieMaxPayloadService,
+ AMD_FAMILY_KB,
+ &PcieMaxPayloadProtocolKB,
+ SERVICES_POINTER
+ };
+ #undef SERVICES_POINTER
+ #define SERVICES_POINTER &PcieMaxPayloadServicesKB
+
+#endif
+#endif // _GNB_INIT_KB_INSTALL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbIommuTablesKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbIommuTablesKB.c
new file mode 100644
index 0000000..82f32dd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbIommuTablesKB.c
@@ -0,0 +1,165 @@
+/**
+ * @file
+ *
+ * GNB init tables
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbTable.h"
+#include "GnbRegistersKB.h"
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T A B L E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+GNB_TABLE ROMDATA GnbIommuInitTableKB [] = {
+
+ // 1. Program D0F0x64_x0D[PciDev0Fn2RegEn] = 1h
+ GNB_ENTRY_RMW (
+ D0F0x64_x0D_TYPE,
+ D0F0x64_x0D_ADDRESS,
+ D0F0x64_x0D_PciDev0Fn2RegEn_MASK,
+ (0x1 << D0F0x64_x0D_PciDev0Fn2RegEn_OFFSET)
+ ),
+ // 2. Program credits for the BIF client as follows
+ GNB_ENTRY_RMW (
+ 0xa,
+ ((L1_SEL_BIF << 16) | 0x32),
+ 0x10000 | 0x3F0 | 0xFC00,
+ (0x1 << 16) | (0x8 << 4) | (0x8 << 10)
+ ),
+ // 3. Program credits for the PPD client as follows
+ GNB_ENTRY_RMW (
+ 0xa,
+ ((L1_SEL_PPD << 16) | 0x32),
+ 0x3F0 | 0xFC00,
+ (0x8 << 4) | (0x7 << 10)
+ ),
+ // 4. Program credits for the INTGEN client as follows
+ GNB_ENTRY_RMW (
+ 0xa,
+ ((L1_SEL_INTGEN << 16) | 0x32),
+ 0x3F0 | 0xFC00,
+ (0x4 << 4) | (0x4 << 10)
+ ),
+ // 5. Program clock gating as follows
+ GNB_ENTRY_RMW (
+ 0xa,
+ ((L1_SEL_PPD << 16) | 0x33),
+ 0x10 | 0x20 |
+ 0x40 | 0x80 |
+ 0x100 | 0x200 |
+ 0x400 | 0x80000000 |
+ 0x800,
+ (0x1 << 4) | (0x1 << 5) |
+ (0x1 << 6) | (0x1 << 7) |
+ (0x1 << 8) | (0x1 << 9) |
+ (0x1 << 10) | (0x1 << 31) |
+ (0x1 << 11)
+ ),
+ GNB_ENTRY_RMW (
+ 0xa,
+ ((L1_SEL_BIF << 16) | 0x33),
+ 0x10 | 0x20 |
+ 0x40 | 0x80 |
+ 0x100 | 0x200 |
+ 0x400 | 0x80000000 |
+ 0x800,
+ (0x1 << 4) | (0x1 << 5) |
+ (0x1 << 6) | (0x1 << 7) |
+ (0x1 << 8) | (0x1 << 9) |
+ (0x1 << 10) | (0x1 << 31) |
+ (0x1 << 11)
+ ),
+ GNB_ENTRY_RMW (
+ 0xa,
+ ((L1_SEL_INTGEN << 16) | 0x33),
+ 0x10 | 0x20 |
+ 0x40 | 0x80 |
+ 0x100 | 0x200 |
+ 0x400 | 0x80000000 |
+ 0x800,
+ (0x1 << 4) | (0x1 << 5) |
+ (0x1 << 6) | (0x1 << 7) |
+ (0x1 << 8) | (0x1 << 9) |
+ (0x1 << 10) | (0x1 << 31) |
+ (0x1 << 11)
+ ),
+ // 6. Program D0F0x64_x0D[PciDev0Fn2RegEn] = 0h
+ GNB_ENTRY_RMW (
+ D0F0x64_x0D_TYPE,
+ D0F0x64_x0D_ADDRESS,
+ D0F0x64_x0D_PciDev0Fn2RegEn_MASK,
+ 0
+ ),
+ GNB_ENTRY_TERMINATE
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbMidInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbMidInitKB.c
new file mode 100644
index 0000000..b9ba10d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbMidInitKB.c
@@ -0,0 +1,429 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB mid post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbF1Table.h"
+#include "heapManager.h"
+#include "GnbGfxFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbNbInitLibV1.h"
+#include "GnbNbInitLibV5.h"
+#include "GnbGfxInitLibV1.h"
+#include "GnbSmuInitLibV7.h"
+#include "GnbTable.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbRegistersKB.h"
+#include "GnbFamServices.h"
+#include "OptionGnb.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GNBMIDINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+extern GNB_TABLE ROMDATA GnbMidInitTableKB[];
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GnbMidInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * @param[out] Index State index
+ * @param[in] PpF1s
+ * @retval TRUE State is valid
+ */
+STATIC BOOLEAN
+GnbIsF1dStateValid (
+ IN UINT8 Index,
+ IN PP_F1_ARRAY_V2 *PpF1s
+ )
+{
+ BOOLEAN Result;
+ Result = FALSE;
+
+ if (Index >= 5) {
+ Result = FALSE;
+ } else if ((PpF1s->PP_FUSE_ARRAY_V2_fld37 & (1 << Index)) ||
+ (PpF1s->PP_FUSE_ARRAY_V2_fld38 & (1 << Index))) {
+ Result = TRUE;
+ }
+ return Result;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * LCLK DPM Initialization
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+STATIC AGESA_STATUS
+GnbLclkDpmInitKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PP_F1_ARRAY_V2 *PpF1Array;
+ PCI_ADDR GnbPciAddress;
+ UINT8 Index;
+ UINT8 LclkDpmMode;
+
+ UINT32 D0F0xBC_x3FD00[8];
+ UINT32 D0F0xBC_x3FD04[8];
+ UINT32 D0F0xBC_x3FD08[8];
+ UINT32 D0F0xBC_x3FD0C[8];
+ UINT32 D0F0xBC_x3FD10[8];
+ UINT32 D0F0xBC_x3FDC8;
+ UINT32 D0F0xBC_x3F820;
+ UINT32 D0F0xBC_x3FDC4;
+ UINT32 D0F0xBC_xC0200110;
+
+ GNB_HANDLE *GnbHandle;
+ DEV_OBJECT DevObject;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbLclkDpmInitKB Enter\n");
+ Status = AGESA_SUCCESS;
+
+ GnbHandle = GnbGetHandle (StdHeader);
+ DevObject.DevPciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0);
+ DevObject.GnbHandle = GnbHandle;
+ DevObject.StdHeader = StdHeader;
+
+ GnbRegisterReadKB (GnbHandle, 0x4,
+ 0x3f820, &D0F0xBC_x3F820, 0, StdHeader);
+ D0F0xBC_x3F820 &= ~0xFF;
+ GnbRegisterWriteKB (GnbHandle, 0x4,
+ 0x3f820, &D0F0xBC_x3F820, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+
+ LclkDpmMode = GnbBuildOptions.LclkDpmEn ? LclkDpmRcActivity : LclkDpmDisabled;
+ IDS_OPTION_HOOK (IDS_GNB_LCLK_DPM_EN, &LclkDpmMode, StdHeader);
+ if (LclkDpmMode == LclkDpmRcActivity) {
+ PpF1Array = GnbLocateHeapBuffer (AMD_PP_F1_TABLE_HANDLE, StdHeader);
+ if (PpF1Array != NULL) {
+ Status = PcieLocateConfigurationData (StdHeader, &Pcie);
+ if (Status == AGESA_SUCCESS) {
+ GnbPciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0);
+ //Clear DPM_EN bit in LCLK_DPM_CNTL register
+ //Call BIOS service SMC_MSG_CONFIG_LCLK_DPM to disable LCLK DPM
+ GnbRegisterReadKB (GnbHandle, 0x4,
+ 0x3fdc8, &D0F0xBC_x3FDC8, 0, StdHeader);
+ D0F0xBC_x3FDC8 &= 0x00FFFFFF;
+ GnbRegisterWriteKB (GnbHandle, 0x4,
+ 0x3fdc8, &D0F0xBC_x3FDC8, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+
+ //Initialize LCLK states
+ LibAmdMemFill (D0F0xBC_x3FD00, 0x00, sizeof (D0F0xBC_x3FD00), StdHeader);
+ LibAmdMemFill (D0F0xBC_x3FD04, 0x00, sizeof (D0F0xBC_x3FD04), StdHeader);
+ LibAmdMemFill (D0F0xBC_x3FD08, 0x00, sizeof (D0F0xBC_x3FD08), StdHeader);
+ LibAmdMemFill (D0F0xBC_x3FD0C, 0x00, sizeof (D0F0xBC_x3FD0C), StdHeader);
+ LibAmdMemFill (D0F0xBC_x3FD10, 0x00, sizeof (D0F0xBC_x3FD10), StdHeader);
+
+ for (Index = 0; Index < 8; ++Index) {
+
+ if (GnbIsF1dStateValid (Index, PpF1Array)) {
+
+ ASSERT (Index < 5);
+ IDS_HDT_CONSOLE (GNB_TRACE, " Valid Lclk state: %d\n", Index);
+
+ // CNTL0
+ D0F0xBC_x3FD00[Index] = 0;
+ D0F0xBC_x3FD00[Index] |= (PpF1Array->PP_FUSE_ARRAY_V2_fld5[Index] & 0xFF) << 16;
+ D0F0xBC_x3FD00[Index] |= 1 << 24;
+
+ // CNTL1
+ D0F0xBC_x3FD04[Index] = GnbTranslateVidCodeToMillivoltV5 (
+ PpF1Array->PP_FUSE_ARRAY_V2_fld32[Index], StdHeader
+ ) * 4 / 100;
+
+ // CNTL2
+ // D0F0xBC_x3FD08 defined as zero and is already zeroed above
+ D0F0xBC_x3FD08[Index] = 0;
+
+ // CNTL3
+ D0F0xBC_x3FD0C[Index] =
+ GfxFmCalculateClock (PpF1Array->PP_FUSE_ARRAY_V2_fld5[Index], StdHeader);
+ D0F0xBC_x3FD10[Index] &= ~(0xFF << 8);
+ switch (D0F0xBC_x3FD0C[Index]) {
+ case 20000:
+ D0F0xBC_x3FD10[Index] |= 0x7 << 8;
+ break;
+ case 30000:
+ D0F0xBC_x3FD10[Index] |= 0x2 << 8;
+ break;
+ case 40000:
+ D0F0xBC_x3FD10[Index] |= 0x3 << 8;
+ break;
+ case 15000:
+ D0F0xBC_x3FD10[Index] |= 0x6 << 8;
+ break;
+ case 10000:
+ D0F0xBC_x3FD10[Index] |= 0x8 << 8;
+ break;
+ default:
+ break;
+ }
+
+ // Activity Threshold
+ D0F0xBC_x3FD10[Index] &= ~0xFFFF0000;
+ D0F0xBC_x3FD10[Index] |= 50 << 24;
+ } else {
+
+ IDS_HDT_CONSOLE (GNB_TRACE, " Invalid Lclk state: %d\n", Index);
+
+ // CNTL0
+ D0F0xBC_x3FD00[Index] = 0xF800;
+
+ // CNTL1
+ D0F0xBC_x3FD04[Index] = 0x0;
+
+ // CNTL2
+ // D0F0xBC_x3FD08 defined as zero and is already zeroed above
+ D0F0xBC_x3FD08[Index] = 0;
+
+ // CNTL3
+ D0F0xBC_x3FD0C[Index] = 0;
+
+ // Activity Threshold
+ D0F0xBC_x3FD10[Index] &= ~0xFFFF0000;
+ D0F0xBC_x3FD10[Index] |= 50 << 24;
+ }
+
+ GnbRegisterWriteKB (
+ GnbHandle,
+ 0x4,
+ 0x3fd00 + Index * 0x14,
+ &D0F0xBC_x3FD00[Index],
+ GNB_REG_ACC_FLAG_S3SAVE,
+ StdHeader
+ );
+ GnbRegisterWriteKB (
+ GnbHandle,
+ 0x4,
+ 0x3fd04 + Index * 0x14,
+ &D0F0xBC_x3FD04[Index],
+ GNB_REG_ACC_FLAG_S3SAVE,
+ StdHeader
+ );
+ GnbRegisterWriteKB (
+ GnbHandle,
+ 0x4,
+ 0x3fd08 + Index * 0x14,
+ &D0F0xBC_x3FD08[Index],
+ GNB_REG_ACC_FLAG_S3SAVE,
+ StdHeader
+ );
+ GnbRegisterWriteKB (
+ GnbHandle,
+ 0x4,
+ 0x3fd0c + Index * 0x14,
+ &D0F0xBC_x3FD0C[Index],
+ GNB_REG_ACC_FLAG_S3SAVE,
+ StdHeader
+ );
+ GnbRegisterWriteKB (
+ GnbHandle,
+ 0x4,
+ 0x3fd10 + Index * 0x14,
+ &D0F0xBC_x3FD10[Index],
+ GNB_REG_ACC_FLAG_S3SAVE,
+ StdHeader
+ );
+ }
+ //Enable LCLK DPM Voltage Scaling
+ GnbRegisterReadKB (GnbHandle, 0x4,
+ 0x3fdc8, &D0F0xBC_x3FDC8, 0, StdHeader);
+ D0F0xBC_x3FDC8 &= 0xFF;
+ D0F0xBC_x3FDC8 |= 1 << 16 | 1 << 24;
+ GnbRegisterWriteKB (GnbHandle, 0x4,
+ 0x3fdc8, &D0F0xBC_x3FDC8, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+
+ GnbRegisterReadKB (GnbHandle, 0x4,
+ 0x3fdc4, &D0F0xBC_x3FDC4, 0, StdHeader);
+ D0F0xBC_x3FDC4 = 5;
+ GnbRegisterWriteKB (GnbHandle, 0x4,
+ 0x3fdc4, &D0F0xBC_x3FDC4, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+
+ GnbRegisterReadKB (GnbHandle, 0x4,
+ 0x3f820, &D0F0xBC_x3F820, 0, StdHeader);
+ D0F0xBC_x3F820 &= ~0xFF; D0F0xBC_x3F820 |= 1;
+ GnbRegisterWriteKB (GnbHandle, 0x4,
+ 0x3f820, &D0F0xBC_x3F820, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+
+ GnbRegisterReadKB (GnbHandle, 0x4,
+ 0xc0200110, &D0F0xBC_xC0200110, 0, StdHeader);
+ D0F0xBC_xC0200110 &= ~(1 << 2 | 7 << 5 | 0xfffff800);
+ D0F0xBC_xC0200110 &= ~(1 << 0 | 1 << 1 | 1 << 8);
+ D0F0xBC_xC0200110 |= 3<<3 | 1 << 9 | 1 << 10; //.Field.BusyCntSel = 3;
+ GnbRegisterWriteKB (GnbHandle, 0x4,
+ 0xc0200110, &D0F0xBC_xC0200110, GNB_REG_ACC_FLAG_S3SAVE, StdHeader);
+
+
+ GnbSmuServiceRequestV7 (
+ &DevObject,
+ SMC_MSG_LCLK_DPM_ENABLE,
+ 0,
+ GNB_REG_ACC_FLAG_S3SAVE
+ );
+
+ }
+ } else {
+ Status = AGESA_ERROR;
+ }
+
+ GnbSmuServiceRequestV7 (
+ &DevObject,
+ SMC_MSG_ENABLE_ALLCLK_MONITOR,
+ 0,
+ GNB_REG_ACC_FLAG_S3SAVE
+ );
+
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbLclkDpmInitKB Exit [0x%x]\n", Status);
+ return Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PCIe Mid Post Init
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GnbMidInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ UINT32 Property;
+ AGESA_STATUS AgesaStatus;
+ GNB_HANDLE *GnbHandle;
+ PCI_ADDR GnbPciAddress;
+
+ AgesaStatus = AGESA_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbMidInterfaceKB Enter\n");
+
+ Property = TABLE_PROPERTY_DEFAULT;
+ Property |= GfxLibIsControllerPresent (StdHeader) ? 0 : TABLE_PROPERTY_IGFX_DISABLED;
+ Property |= GnbBuildOptions.LclkDeepSleepEn ? TABLE_PROPERTY_LCLK_DEEP_SLEEP : 0;
+ Property |= GnbBuildOptions.CfgOrbClockGatingEnable ? 0x00000008ul : 0;
+ Property |= 0x00000010ul;
+ Property |= GnbBuildOptions.CfgIocSclkClockGatingEnable ? 0x00000020ul : 0;
+
+ GnbHandle = GnbGetHandle (StdHeader);
+ while (GnbHandle != NULL) {
+ IDS_OPTION_HOOK (IDS_GNB_PROPERTY, &Property, StdHeader);
+ Status = GnbProcessTable (
+ GnbHandle,
+ GnbMidInitTableKB,
+ Property,
+ GNB_TABLE_FLAGS_FORCE_S3_SAVE,
+ StdHeader
+ );
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ GnbHandle = GnbGetNextHandle (GnbHandle);
+ }
+
+ GnbPciAddress = GnbGetHostPciAddress (GnbGetHandle (StdHeader));
+ GnbLibPciIndirectWriteField (
+ GnbPciAddress.AddressValue | D0F0xF8_ADDRESS,
+ D0F0xFC_x0F_ADDRESS,
+ D0F0xFC_x0F_GBIFExtIntrGrp_OFFSET,
+ D0F0xFC_x0F_GBIFExtIntrGrp_WIDTH,
+ 5,
+ AccessS3SaveWidth32,
+ StdHeader
+ );
+
+ GnbLibPciIndirectWriteField (
+ GnbPciAddress.AddressValue | D0F0xF8_ADDRESS,
+ D0F0xFC_x0F_ADDRESS,
+ D0F0xFC_x0F_GBIFExtIntrSwz_OFFSET,
+ D0F0xFC_x0F_GBIFExtIntrSwz_WIDTH,
+ 0,
+ AccessS3SaveWidth32,
+ StdHeader
+ );
+
+ Status = GnbLclkDpmInitKB (StdHeader);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbMidInterfaceKB Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbPostInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbPostInitKB.c
new file mode 100644
index 0000000..ce6eda2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbPostInitKB.c
@@ -0,0 +1,120 @@
+/**
+ * @file
+ *
+ * GNB post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbGfxConfig.h"
+#include "GnbGfxInitLibV1.h"
+#include "GnbNbInitLibV1.h"
+#include "GnbNbInitLibV5.h"
+#include "GnbPcieConfig.h"
+#include "GfxLibV3.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GNBPOSTINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+GnbPostInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PCIe Early Post Init
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GnbPostInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ GNB_HANDLE *GnbHandle;
+ PCI_ADDR GnbPciAddress;
+ GFX_PLATFORM_CONFIG *Gfx;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbPostInterfaceKB Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+
+ Status = GfxLocateConfigData (StdHeader, &Gfx);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ GnbHandle = GnbGetHandle (StdHeader);
+ while (GnbHandle != NULL) {
+ GnbPciAddress = GnbGetHostPciAddress (GnbHandle);
+ Status = GnbSetTomV5 (GnbPciAddress, StdHeader);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ GnbHandle = GnbGetNextHandle (GnbHandle);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbPostInterfaceKB Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbRegisterAccKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbRegisterAccKB.c
new file mode 100644
index 0000000..499275b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbRegisterAccKB.c
@@ -0,0 +1,585 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize PP/DPM fuse table.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbRegistersKB.h"
+#include "GnbSmuInitLibV7.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GNBREGISTERACCKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define GNB_IGNORED_PARAM 0xFF
+#define ORB_WRITE_ENABLE 0x100
+#define IOMMU_L1_WRITE_ENABLE 0x80000000ul
+#define IOMMU_L2_WRITE_ENABLE 0x100
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GnbRegisterWriteKBDump (
+ IN UINT8 RegisterSpaceType,
+ IN UINT32 Address,
+ IN VOID *Value
+ );
+
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Routine to read all register spaces.
+ *
+ *
+ *
+ * @param[in] RegisterSpaceType Register space type
+ * @param[in] Address Register offset, but PortDevice
+ * @param[out] Value Return value
+ * @param[in] Flags Flags - BIT0 indicates S3 save/restore
+ * @param[in] StdHeader Standard configuration header
+ */
+AGESA_STATUS
+GnbRegisterReadKB (
+ IN GNB_HANDLE *GnbHandle,
+ IN UINT8 RegisterSpaceType,
+ IN UINT32 Address,
+ OUT VOID *Value,
+ IN UINT32 Flags,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ ACCESS_WIDTH Width;
+ UINT32 TempValue;
+ UINT32 TempAddress;
+ PCI_ADDR GnbPciAddress;
+
+ GnbPciAddress = GnbGetHostPciAddress (GnbHandle);
+ Width = (Flags == GNB_REG_ACC_FLAG_S3SAVE) ? AccessS3SaveWidth32 : AccessWidth32;
+ TempAddress = 0;
+ TempValue = 0;
+
+
+ switch (RegisterSpaceType) {
+ case 0x1:
+ GnbLibPciRead (
+ GnbPciAddress.AddressValue | Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case 0x8:
+ GnbPciAddress.Address.Function = 2;
+ GnbLibPciRead (
+ GnbPciAddress.AddressValue | Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case 0x6: ///@todo has to be DxFx
+ GnbLibPciRead (
+ Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case TYPE_D18F0:
+ GnbLibPciRead (
+ MAKE_SBDFO (0, 0, 0x18, 0, Address),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case TYPE_D18F1:
+ GnbLibPciRead (
+ MAKE_SBDFO (0, 0, 0x18, 1, Address),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case TYPE_D18F2:
+ case TYPE_D18F2_dct0:
+ GnbLibPciRead (
+ MAKE_SBDFO (0, 0, 0x18, 2, Address),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case TYPE_D18F3:
+ GnbLibPciRead (
+ MAKE_SBDFO (0, 0, 0x18, 3, Address),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case TYPE_D18F4:
+ GnbLibPciRead (
+ MAKE_SBDFO (0, 0, 0x18, 4, Address),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case TYPE_D18F5:
+ GnbLibPciRead (
+ MAKE_SBDFO (0, 0, 0x18, 5, Address),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0x2:
+ // Miscellaneous Index Data, access the registers D0F0x64_x[FF:00]
+ GnbLibPciIndirectRead (
+ GnbPciAddress.AddressValue | D0F0x60_ADDRESS,
+ Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0x3:
+ // Northbridge ORB Configuration Offset, access D0F0x98_x[FF:00]
+ GnbLibPciIndirectRead (
+ GnbPciAddress.AddressValue | D0F0x94_ADDRESS,
+ Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0x4:
+ {
+ UINT64 TempData;
+ GnbLibPciIndirectRead (
+ GnbPciAddress.AddressValue | D0F0xB8_ADDRESS,
+ (Address & (~0x3ull)),
+ Width,
+ &TempData,
+ StdHeader
+ );
+ if ((Address & 0x3) != 0) {
+ //Non aligned access allowed to fuse block
+ GnbLibPciIndirectRead (
+ GnbPciAddress.AddressValue | D0F0xB8_ADDRESS,
+ (Address & (~0x3ull)) + 4,
+ Width,
+ ((UINT32 *) &TempData) + 1,
+ StdHeader
+ );
+ }
+ * ((UINT32*) Value) = (UINT32) (TempData >> ((Address & 0x3) * 8));
+ break;
+ }
+ case 0x22:
+ // D0F0xD0 Link Index Address, access D0F0xD4_x[0130_14BF:0109_0000]
+ GnbLibPciIndirectRead (
+ GnbPciAddress.AddressValue | 0xD0,
+ Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0x5:
+ // D0F0xE0 Link Index Address, access D0F0xE4_x[FFFF_FFFF:0000_0000]
+ GnbLibPciIndirectRead (
+ GnbPciAddress.AddressValue | D0F0xE0_ADDRESS,
+ Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0x9:
+ GnbPciAddress.Address.Function = 2;
+ GnbLibPciIndirectRead (
+ GnbPciAddress.AddressValue | 0xF0,
+ Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0xa:
+ GnbPciAddress.Address.Function = 2;
+ GnbLibPciIndirectRead (
+ GnbPciAddress.AddressValue | 0xF8,
+ Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case TYPE_MSR:
+ LibAmdMsrRead (Address, Value, StdHeader);
+ break;
+
+ case 0x12:
+ ASSERT (Address < 0x40000);
+ // SRBM
+ GnbLibPciIndirectRead (
+ MAKE_SBDFO (0, 0, 0, 0, 0xB8),
+ (0x80080000 | (Address & 0x3FFFF)),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ default:
+ ASSERT (FALSE);
+ break;
+ }
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Routine to write all register spaces.
+ *
+ *
+ * @param[in] GnbHandle GnbHandle
+ * @param[in] RegisterSpaceType Register space type
+ * @param[in] Address Register offset, but PortDevice
+ * @param[out] Value The value to write
+ * @param[in] Flags Flags - BIT0 indicates S3 save/restore
+ * @param[in] StdHeader Standard configuration header
+ */
+AGESA_STATUS
+GnbRegisterWriteKB (
+ IN GNB_HANDLE *GnbHandle,
+ IN UINT8 RegisterSpaceType,
+ IN UINT32 Address,
+ IN VOID *Value,
+ IN UINT32 Flags,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ ACCESS_WIDTH Width;
+ UINT32 TempValue;
+ UINT32 TempAddress;
+ PCI_ADDR GnbPciAddress;
+ DEV_OBJECT DevObject;
+
+ GnbPciAddress = GnbGetHostPciAddress (GnbHandle);
+ Width = (Flags == GNB_REG_ACC_FLAG_S3SAVE) ? AccessS3SaveWidth32 : AccessWidth32;
+ TempAddress = 0;
+ TempValue = 0;
+
+ GNB_DEBUG_CODE (
+ GnbRegisterWriteKBDump (RegisterSpaceType, Address, Value);
+ );
+
+ switch (RegisterSpaceType) {
+ case 0x1:
+ GnbLibPciWrite (
+ GnbPciAddress.AddressValue | Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case 0x8:
+ GnbPciAddress.Address.Function = 2;
+ GnbLibPciWrite (
+ GnbPciAddress.AddressValue | Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case 0x6: /// @todo needs to be DxFx
+ GnbLibPciWrite (
+ Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case TYPE_D18F0:
+ GnbLibPciWrite (
+ MAKE_SBDFO (0, 0, 0x18, 0, Address),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case TYPE_D18F1:
+ GnbLibPciWrite (
+ MAKE_SBDFO (0, 0, 0x18, 1, Address),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case TYPE_D18F2:
+ case TYPE_D18F2_dct0:
+ GnbLibPciWrite (
+ MAKE_SBDFO (0, 0, 0x18, 2, Address),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case TYPE_D18F3:
+ GnbLibPciWrite (
+ MAKE_SBDFO (0, 0, 0x18, 3, Address),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case TYPE_D18F4:
+ GnbLibPciWrite (
+ MAKE_SBDFO (0, 0, 0x18, 4, Address),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+ case TYPE_D18F5:
+ GnbLibPciWrite (
+ MAKE_SBDFO (0, 0, 0x18, 5, Address),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0x2:
+ // Miscellaneous Index Data, access the registers D0F0x64_x[FF:00]
+ GnbLibPciIndirectWrite (
+ GnbPciAddress.AddressValue | D0F0x60_ADDRESS,
+ Address | IOC_WRITE_ENABLE,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0x3:
+ // Northbridge ORB Configuration Offset, access D0F0x98_x[FF:00]
+ GnbLibPciIndirectWrite (
+ GnbPciAddress.AddressValue | D0F0x94_ADDRESS,
+ Address | ORB_WRITE_ENABLE,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0x4:
+ //SMU, access D0F0xBC_x[FFFFFFFF:00000000]
+ GnbLibPciIndirectWrite (
+ GnbPciAddress.AddressValue | D0F0xB8_ADDRESS,
+ Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0x22:
+ // D0F0xD0 Link Index Address, access D0F0xD4_x[0130_14BF:0109_0000]
+ GnbLibPciIndirectWrite (
+ GnbPciAddress.AddressValue | 0xD0,
+ Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0x5:
+ // D0F0xE0 Link Index Address, access D0F0xE4_x[FFFF_FFFF:0000_0000]
+ GnbLibPciIndirectWrite (
+ GnbPciAddress.AddressValue | D0F0xE0_ADDRESS,
+ Address,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0x9:
+ // IOMMU L2 Config Index, to access the registers D0F2xF4_x[FF:00].
+ GnbPciAddress.Address.Function = 2;
+ GnbLibPciIndirectWrite (
+ GnbPciAddress.AddressValue | 0xF0,
+ Address | IOMMU_L2_WRITE_ENABLE,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case 0xa:
+ GnbPciAddress.Address.Function = 2;
+ GnbLibPciIndirectWrite (
+ GnbPciAddress.AddressValue | 0xF8,
+ Address | IOMMU_L1_WRITE_ENABLE,
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case TYPE_MSR:
+ LibAmdMsrWrite (Address, Value, StdHeader);
+ break;
+
+ case 0x12:
+ ASSERT (Address < 0x40000);
+ // SRBM
+ GnbLibPciIndirectWrite (
+ MAKE_SBDFO (0, 0, 0, 0, 0xB8),
+ (0x80080000 | (Address & 0x3FFFF)),
+ Width,
+ Value,
+ StdHeader
+ );
+ break;
+
+ case TYPE_SMU_MSG:
+ DevObject.StdHeader = StdHeader;
+ DevObject.GnbHandle = GnbGetHandle (StdHeader);
+ DevObject.DevPciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0);
+ GnbSmuServiceRequestV7 (&DevObject, (UINT8) Address, *((UINT32 *)Value), Flags);
+ break;
+
+ default:
+ ASSERT (FALSE);
+ break;
+ }
+
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Routine to dump all write register spaces.
+ *
+ *
+ *
+ * @param[in] RegisterSpaceType Register space type
+ * @param[in] Address Register offset
+ * @param[in] Value The value to write
+ */
+VOID
+GnbRegisterWriteKBDump (
+ IN UINT8 RegisterSpaceType,
+ IN UINT32 Address,
+ IN VOID *Value
+ )
+{
+ IDS_HDT_CONSOLE (NB_MISC, " R WRITE Space %s Address 0x%04x, Value 0x%04x\n",
+ (RegisterSpaceType == 0x1) ? "0x1" : (
+ (RegisterSpaceType == 0x2) ? "0x2" : (
+ (RegisterSpaceType == 0x3) ? "0x3" : (
+ (RegisterSpaceType == 0x4) ? "0x4" : (
+ (RegisterSpaceType == 0x22) ? "0x22" : (
+ (RegisterSpaceType == 0x5) ? "0x5" : (
+ (RegisterSpaceType == 0x6) ? "0x6" : (
+ (RegisterSpaceType == TYPE_D18F0) ? "TYPE_D18F0" : (
+ (RegisterSpaceType == TYPE_D18F1) ? "TYPE_D18F1" : (
+ (RegisterSpaceType == TYPE_D18F2) ? "TYPE_D18F2" : (
+ (RegisterSpaceType == TYPE_D18F3) ? "TYPE_D18F3" : (
+ (RegisterSpaceType == TYPE_D18F4) ? "TYPE_D18F4" : (
+ (RegisterSpaceType == TYPE_D18F5) ? "TYPE_D18F5" : (
+ (RegisterSpaceType == TYPE_MSR) ? "TYPE_MSR" : (
+ (RegisterSpaceType == TYPE_D1F0) ? "TYPE_D1F0" : (
+ (RegisterSpaceType == TYPE_D1F1) ? "TYPE_D1F1" : (
+ (RegisterSpaceType == 0x12) ? "0x12" : (
+ (RegisterSpaceType == TYPE_D18F2x9C_dct0) ? "TYPE_D18F2x9C_dct0" : (
+ (RegisterSpaceType == TYPE_D18F2x9C_dct0_mp0) ? "TYPE_D18F2x9C_dct0_mp0" : (
+ (RegisterSpaceType == TYPE_D18F2x9C_dct0_mp1) ? "TYPE_D18F2x9C_dct0_mp1" : (
+ (RegisterSpaceType == TYPE_D18F2x9C_dct1) ? "TYPE_D18F2x9C_dct1" : (
+ (RegisterSpaceType == TYPE_D18F2x9C_dct1_mp0) ? "TYPE_D18F2x9C_dct1_mp0" : (
+ (RegisterSpaceType == TYPE_D18F2x9C_dct1_mp1) ? "TYPE_D18F2x9C_dct1_mp1" : (
+ (RegisterSpaceType == TYPE_D18F2_dct0) ? "TYPE_D18F2_dct0" : (
+ (RegisterSpaceType == TYPE_D18F2_dct0_mp0) ? "TYPE_D18F2_dct0_mp0" : (
+ (RegisterSpaceType == TYPE_D18F2_dct0_mp1) ? "TYPE_D18F2_dct0_mp1" : (
+ (RegisterSpaceType == TYPE_D18F2_dct1) ? "TYPE_D18F2_dct1" : (
+ (RegisterSpaceType == TYPE_D18F2_dct1_mp0) ? "TYPE_D18F2_dct1_mp0" : (
+ (RegisterSpaceType == TYPE_SMU_MSG) ? "TYPE_SMU_MSG" : (
+ (RegisterSpaceType == TYPE_D18F2_dct1_mp1) ? "TYPE_D18F2_dct1_mp1" : "Invalid"))))))))))))))))))))))))))))),
+ Address,
+ *((UINT32*)Value)
+ );
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbRegisterAccKB.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbRegisterAccKB.h
new file mode 100644
index 0000000..326c0b3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbRegisterAccKB.h
@@ -0,0 +1,68 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Various register access service procedures
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBREGISTERACCKB_H_
+#define _GNBREGISTERACCKB_H_
+
+AGESA_STATUS
+GnbRegisterWriteKB (
+ IN GNB_HANDLE *GnbHandle,
+ IN UINT8 RegisterSpaceType,
+ IN UINT32 Address,
+ IN VOID *Value,
+ IN UINT32 Flags,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GnbRegisterReadKB (
+ IN GNB_HANDLE *GnbHandle,
+ IN UINT8 RegisterSpaceType,
+ IN UINT32 Address,
+ OUT VOID *Value,
+ IN UINT32 Flags,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbSamuPatchKB.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbSamuPatchKB.h
new file mode 100644
index 0000000..bed59c0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbSamuPatchKB.h
@@ -0,0 +1,2103 @@
+/**
+ * @file
+ *
+ * SAMU firmware
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBSAMUPATCHKB_H_
+#define _GNBSAMUPATCHKB_H_
+
+UINT8 SamuPatchKB[] = {
+ 0x9d,
+ 0xaf,
+ 0x50,
+ 0x9,
+ 0x10,
+ 0x3,
+ 0xf6,
+ 0x5f,
+ 0x7b,
+ 0x29,
+ 0x2d,
+ 0xe0,
+ 0x33,
+ 0xbd,
+ 0x76,
+ 0x53,
+ 0x0,
+ 0x4,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x83,
+ 0x4f,
+ 0x17,
+ 0x8e,
+ 0x1f,
+ 0x7e,
+ 0x2,
+ 0xbb,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x3,
+ 0x0,
+ 0x0,
+ 0x2,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x4,
+ 0x0,
+ 0x2,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x80,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0xf7,
+ 0x11,
+ 0xbd,
+ 0x4f,
+ 0x87,
+ 0x69,
+ 0x32,
+ 0x50,
+ 0x1,
+ 0x9,
+ 0x10,
+ 0x0,
+ 0x1,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x8a,
+ 0x38,
+ 0x2f,
+ 0xed,
+ 0x4d,
+ 0x1c,
+ 0x95,
+ 0x9f,
+ 0xe2,
+ 0x0,
+ 0xc0,
+ 0x45,
+ 0x50,
+ 0xe2,
+ 0x8,
+ 0xd2,
+ 0x9a,
+ 0xe1,
+ 0xca,
+ 0x4d,
+ 0xd0,
+ 0xb3,
+ 0xf1,
+ 0x3f,
+ 0x43,
+ 0x6a,
+ 0x12,
+ 0x54,
+ 0xfb,
+ 0x99,
+ 0x99,
+ 0xf9,
+ 0x4e,
+ 0x63,
+ 0xae,
+ 0x61,
+ 0x75,
+ 0x6a,
+ 0x90,
+ 0xf6,
+ 0x43,
+ 0xab,
+ 0xf8,
+ 0xd4,
+ 0x69,
+ 0x4d,
+ 0xe1,
+ 0x54,
+ 0x8e,
+ 0x68,
+ 0x9f,
+ 0x7,
+ 0x39,
+ 0x67,
+ 0xf4,
+ 0xdc,
+ 0x25,
+ 0xcb,
+ 0x0,
+ 0x66,
+ 0x28,
+ 0x4b,
+ 0xe5,
+ 0xdc,
+ 0x62,
+ 0x5a,
+ 0xa6,
+ 0xd6,
+ 0x1e,
+ 0xcd,
+ 0x48,
+ 0x15,
+ 0xde,
+ 0x62,
+ 0x53,
+ 0x7a,
+ 0xf,
+ 0xdf,
+ 0x44,
+ 0x4e,
+ 0x95,
+ 0xa6,
+ 0x82,
+ 0xa1,
+ 0x47,
+ 0x11,
+ 0x50,
+ 0x5f,
+ 0x18,
+ 0x8c,
+ 0x94,
+ 0x13,
+ 0xb8,
+ 0x14,
+ 0x21,
+ 0x4c,
+ 0xba,
+ 0x7b,
+ 0x4f,
+ 0x5e,
+ 0xe2,
+ 0x9,
+ 0x74,
+ 0x7e,
+ 0x71,
+ 0x21,
+ 0x74,
+ 0xd2,
+ 0xb2,
+ 0xc3,
+ 0xa8,
+ 0xa6,
+ 0x41,
+ 0x83,
+ 0x30,
+ 0xaa,
+ 0xf3,
+ 0x88,
+ 0x7b,
+ 0x16,
+ 0xfc,
+ 0xe5,
+ 0xe9,
+ 0x6f,
+ 0x9a,
+ 0xdf,
+ 0x7b,
+ 0x86,
+ 0x91,
+ 0xf5,
+ 0xb6,
+ 0x4,
+ 0x9e,
+ 0x7a,
+ 0x5,
+ 0xea,
+ 0x18,
+ 0x2e,
+ 0x7,
+ 0xc6,
+ 0x9,
+ 0x10,
+ 0xc5,
+ 0x1e,
+ 0xf,
+ 0x51,
+ 0x84,
+ 0x27,
+ 0x80,
+ 0x8d,
+ 0xa3,
+ 0x0,
+ 0x2d,
+ 0x53,
+ 0x6a,
+ 0xaa,
+ 0xad,
+ 0x2e,
+ 0x1e,
+ 0x33,
+ 0x6a,
+ 0x3d,
+ 0x72,
+ 0x16,
+ 0x34,
+ 0x9f,
+ 0x5f,
+ 0x33,
+ 0x70,
+ 0xe2,
+ 0x85,
+ 0xb7,
+ 0xbe,
+ 0xdf,
+ 0x59,
+ 0xd0,
+ 0xbc,
+ 0x7b,
+ 0xc0,
+ 0x1f,
+ 0x8e,
+ 0xc4,
+ 0x25,
+ 0xb5,
+ 0xe3,
+ 0x88,
+ 0x60,
+ 0x20,
+ 0x73,
+ 0x44,
+ 0x17,
+ 0x2f,
+ 0x0,
+ 0x2b,
+ 0xa5,
+ 0xea,
+ 0x4d,
+ 0x9,
+ 0xa5,
+ 0x42,
+ 0x95,
+ 0x23,
+ 0xb9,
+ 0x1e,
+ 0x1,
+ 0xe8,
+ 0xf7,
+ 0x7c,
+ 0x9f,
+ 0xbe,
+ 0xb0,
+ 0x85,
+ 0xf4,
+ 0x18,
+ 0xa9,
+ 0xf2,
+ 0x87,
+ 0x84,
+ 0x73,
+ 0xc2,
+ 0xfe,
+ 0x9a,
+ 0x8c,
+ 0xbb,
+ 0x9d,
+ 0x36,
+ 0x8d,
+ 0x2e,
+ 0x94,
+ 0xc1,
+ 0x6c,
+ 0x5f,
+ 0xc4,
+ 0x3,
+ 0x77,
+ 0x60,
+ 0x64,
+ 0x70,
+ 0x65,
+ 0x45,
+ 0x8,
+ 0x89,
+ 0xf9,
+ 0x4f,
+ 0x76,
+ 0x25,
+ 0x79,
+ 0x1b,
+ 0x2a,
+ 0x46,
+ 0x4b,
+ 0xfb,
+ 0x1b,
+ 0xed,
+ 0x32,
+ 0x16,
+ 0x6d,
+ 0x3c,
+ 0x65,
+ 0xbb,
+ 0xc4,
+ 0xe7,
+ 0xdd,
+ 0xf2,
+ 0xd1,
+ 0x13,
+ 0x84,
+ 0x9a,
+ 0x5f,
+ 0x71,
+ 0x15,
+ 0x6d,
+ 0x46,
+ 0x3,
+ 0x14,
+ 0xbc,
+ 0x54,
+ 0x17,
+ 0x3a,
+ 0x12,
+ 0x3a,
+ 0x8,
+ 0xe6,
+ 0x9c,
+ 0xff,
+ 0xb3,
+ 0x13,
+ 0xfd,
+ 0x37,
+ 0x17,
+ 0xb6,
+ 0x79,
+ 0x6,
+ 0x56,
+ 0x9d,
+ 0xd1,
+ 0xb7,
+ 0x57,
+ 0x33,
+ 0x3a,
+ 0x85,
+ 0xbc,
+ 0xb2,
+ 0xd6,
+ 0x47,
+ 0x71,
+ 0x79,
+ 0xa1,
+ 0xf8,
+ 0xf4,
+ 0x97,
+ 0xc6,
+ 0x67,
+ 0x6e,
+ 0xe6,
+ 0xa7,
+ 0x7e,
+ 0xfe,
+ 0x81,
+ 0xb5,
+ 0x6a,
+ 0x97,
+ 0xd0,
+ 0x3e,
+ 0x4e,
+ 0x7c,
+ 0x20,
+ 0xac,
+ 0xb,
+ 0x28,
+ 0xde,
+ 0x5e,
+ 0x73,
+ 0x9c,
+ 0xb3,
+ 0x28,
+ 0xd6,
+ 0xa0,
+ 0xd,
+ 0x6e,
+ 0x41,
+ 0x2b,
+ 0x82,
+ 0xa8,
+ 0xb9,
+ 0x45,
+ 0x3d,
+ 0x5d,
+ 0xd7,
+ 0xa,
+ 0xa6,
+ 0x16,
+ 0xcd,
+ 0xfb,
+ 0x6a,
+ 0x63,
+ 0xab,
+ 0x50,
+ 0x4c,
+ 0x2,
+ 0xce,
+ 0x4b,
+ 0xbf,
+ 0xac,
+ 0x68,
+ 0x24,
+ 0x5b,
+ 0x56,
+ 0xc0,
+ 0x72,
+ 0xe6,
+ 0x63,
+ 0x0,
+ 0xff,
+ 0x71,
+ 0xbd,
+ 0x4a,
+ 0x0,
+ 0x8b,
+ 0xff,
+ 0xff,
+ 0x2b,
+ 0xe1,
+ 0x89,
+ 0xb0,
+ 0xd1,
+ 0x8c,
+ 0x15,
+ 0x74,
+ 0xe9,
+ 0xef,
+ 0x5b,
+ 0x88,
+ 0xe4,
+ 0x6e,
+ 0x94,
+ 0x52,
+ 0x66,
+ 0xcb,
+ 0xcf,
+ 0x77,
+ 0x7f,
+ 0xb,
+ 0xc0,
+ 0x88,
+ 0x99,
+ 0x9f,
+ 0xce,
+ 0xbe,
+ 0xf3,
+ 0xf0,
+ 0x9d,
+ 0x42,
+ 0xe,
+ 0x8f,
+ 0x63,
+ 0x7c,
+ 0x2,
+ 0x6f,
+ 0x7,
+ 0x2,
+ 0xb1,
+ 0x91,
+ 0xbe,
+ 0xdc,
+ 0x28,
+ 0xc8,
+ 0x1d,
+ 0x1c,
+ 0xfb,
+ 0xb,
+ 0xcf,
+ 0x96,
+ 0x73,
+ 0x56,
+ 0x70,
+ 0x10,
+ 0xdc,
+ 0x41,
+ 0xad,
+ 0x15,
+ 0x70,
+ 0xab,
+ 0x4d,
+ 0x81,
+ 0x7,
+ 0x1c,
+ 0x9a,
+ 0x31,
+ 0x1,
+ 0x2a,
+ 0xd3,
+ 0x9e,
+ 0x3d,
+ 0x3f,
+ 0x8c,
+ 0x88,
+ 0x38,
+ 0xc9,
+ 0xb5,
+ 0xbe,
+ 0xaa,
+ 0x3f,
+ 0x83,
+ 0x14,
+ 0xdc,
+ 0xc2,
+ 0x90,
+ 0x37,
+ 0x7,
+ 0xc5,
+ 0x49,
+ 0xf3,
+ 0x3a,
+ 0xe8,
+ 0x2d,
+ 0xc5,
+ 0xd8,
+ 0xa9,
+ 0x4,
+ 0x54,
+ 0x21,
+ 0x32,
+ 0x76,
+ 0xd2,
+ 0x13,
+ 0x42,
+ 0x58,
+ 0x9e,
+ 0xa7,
+ 0x36,
+ 0xfd,
+ 0xf3,
+ 0xd1,
+ 0x42,
+ 0x69,
+ 0xe1,
+ 0x58,
+ 0x9b,
+ 0xec,
+ 0xe9,
+ 0x4e,
+ 0x3e,
+ 0xdf,
+ 0x3b,
+ 0x9b,
+ 0x72,
+ 0x82,
+ 0xfc,
+ 0x7e,
+ 0xdf,
+ 0x74,
+ 0x14,
+ 0xa7,
+ 0x2a,
+ 0xbf,
+ 0x75,
+ 0xa5,
+ 0xb0,
+ 0xee,
+ 0x79,
+ 0xd0,
+ 0xc4,
+ 0x3e,
+ 0xbc,
+ 0xdc,
+ 0xc6,
+ 0xb,
+ 0xeb,
+ 0xf6,
+ 0x6e,
+ 0x95,
+ 0xda,
+ 0x9e,
+ 0x57,
+ 0xb5,
+ 0xc6,
+ 0xa8,
+ 0x8d,
+ 0x79,
+ 0xf8,
+ 0xbf,
+ 0xa9,
+ 0x79,
+ 0x96,
+ 0x2c,
+ 0x29,
+ 0x64,
+ 0x2c,
+ 0x32,
+ 0x94,
+ 0x89,
+ 0x17,
+ 0x30,
+ 0x1a,
+ 0x4e,
+ 0x7e,
+ 0x8d,
+ 0xfc,
+ 0x40,
+ 0xee,
+ 0x39,
+ 0x9e,
+ 0x13,
+ 0x56,
+ 0x25,
+ 0xe1,
+ 0xd3,
+ 0x3,
+ 0x95,
+ 0x6a,
+ 0x69,
+ 0x48,
+ 0x47,
+ 0xf8,
+ 0x5e,
+ 0x2f,
+ 0x9f,
+ 0xcd,
+ 0x1f,
+ 0xcb,
+ 0x35,
+ 0xbf,
+ 0x90,
+ 0x70,
+ 0x75,
+ 0xff,
+ 0x7d,
+ 0x4e,
+ 0xa8,
+ 0x0,
+ 0xed,
+ 0x3,
+ 0xee,
+ 0xce,
+ 0x83,
+ 0x2d,
+ 0xca,
+ 0x75,
+ 0xad,
+ 0x82,
+ 0x94,
+ 0x86,
+ 0xec,
+ 0x58,
+ 0x4,
+ 0x8f,
+ 0x6c,
+ 0x34,
+ 0x89,
+ 0x8,
+ 0xac,
+ 0x53,
+ 0x74,
+ 0x8c,
+ 0xf1,
+ 0x8a,
+ 0xf9,
+ 0x55,
+ 0x31,
+ 0xaf,
+ 0xb7,
+ 0x9,
+ 0xd8,
+ 0x66,
+ 0x5,
+ 0xa0,
+ 0xe2,
+ 0x84,
+ 0x8e,
+ 0x21,
+ 0x35,
+ 0xb0,
+ 0x66,
+ 0x87,
+ 0x40,
+ 0xd0,
+ 0xbd,
+ 0xf3,
+ 0x6e,
+ 0x57,
+ 0xf5,
+ 0x7e,
+ 0x3a,
+ 0xe4,
+ 0x6f,
+ 0x8d,
+ 0x8c,
+ 0xfb,
+ 0x45,
+ 0x36,
+ 0x53,
+ 0xd3,
+ 0xf7,
+ 0x32,
+ 0xd5,
+ 0x21,
+ 0xb,
+ 0x81,
+ 0xe0,
+ 0x7,
+ 0xc9,
+ 0x68,
+ 0xc4,
+ 0x93,
+ 0x59,
+ 0x7a,
+ 0xcb,
+ 0xad,
+ 0x65,
+ 0xb7,
+ 0x66,
+ 0x84,
+ 0x2f,
+ 0x3b,
+ 0x9f,
+ 0xe7,
+ 0x43,
+ 0x11,
+ 0x36,
+ 0xa5,
+ 0x36,
+ 0x77,
+ 0x32,
+ 0xbd,
+ 0x1d,
+ 0x7d,
+ 0x49,
+ 0x61,
+ 0x79,
+ 0x88,
+ 0x2d,
+ 0x8e,
+ 0x41,
+ 0xec,
+ 0x14,
+ 0x31,
+ 0xf9,
+ 0xaa,
+ 0x97,
+ 0x1a,
+ 0x39,
+ 0x6a,
+ 0xb3,
+ 0xe8,
+ 0xdb,
+ 0x57,
+ 0xd4,
+ 0x6d,
+ 0xed,
+ 0xa6,
+ 0x2a,
+ 0x3c,
+ 0xba,
+ 0x7,
+ 0x8a,
+ 0x22,
+ 0x5f,
+ 0xa7,
+ 0xc3,
+ 0xa1,
+ 0x3,
+ 0x86,
+ 0xa8,
+ 0xa,
+ 0x12,
+ 0x0,
+ 0x1f,
+ 0xd0,
+ 0x1a,
+ 0xc7,
+ 0x5d,
+ 0xdf,
+ 0x51,
+ 0xad,
+ 0x2e,
+ 0xf6,
+ 0x1e,
+ 0xb7,
+ 0xb2,
+ 0x1f,
+ 0x40,
+ 0x76,
+ 0x72,
+ 0xf0,
+ 0x6,
+ 0x4a,
+ 0x1f,
+ 0x69,
+ 0x3,
+ 0xc5,
+ 0x7f,
+ 0x93,
+ 0x5c,
+ 0x31,
+ 0x6e,
+ 0x8b,
+ 0x3a,
+ 0xc7,
+ 0x46,
+ 0xc5,
+ 0xe3,
+ 0x8b,
+ 0x9d,
+ 0xf4,
+ 0x79,
+ 0x6d,
+ 0x2e,
+ 0x7f,
+ 0x45,
+ 0x5c,
+ 0x9e,
+ 0x2d,
+ 0xec,
+ 0xe8,
+ 0x91,
+ 0xd0,
+ 0x37,
+ 0xc7,
+ 0xba,
+ 0x73,
+ 0x87,
+ 0x79,
+ 0x8a,
+};
+
+UINT32 SamuPatchKBHeader[] = {
+ 0x53414d55,
+ 0x410
+};
+
+UINT8 SamuPatchKBUnf1[] = {
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0xe8,
+ 0x2,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x1,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x1,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x1,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0xe8,
+ 0x2,
+ 0x0,
+ 0x0,
+ 0x2,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x4,
+ 0x0,
+ 0x2,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x80,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x98,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x34,
+ 0x3,
+ 0x80,
+ 0x1c,
+ 0x78,
+ 0xfc,
+ 0xff,
+ 0x9c,
+ 0x3b,
+ 0x84,
+ 0x0,
+ 0x0,
+ 0xf8,
+ 0x0,
+ 0xd0,
+ 0x5a,
+ 0x9b,
+ 0x2,
+ 0x0,
+ 0x0,
+ 0xe0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x34,
+ 0x1,
+ 0x0,
+ 0x5a,
+ 0x37,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xe3,
+ 0x0,
+ 0x0,
+ 0x4,
+ 0x34,
+ 0x0,
+ 0x12,
+ 0x44,
+ 0x80,
+ 0x0,
+ 0x20,
+ 0x23,
+ 0x34,
+ 0x0,
+ 0x0,
+ 0x65,
+ 0x28,
+ 0x0,
+ 0x40,
+ 0x23,
+ 0x34,
+ 0x0,
+ 0x0,
+ 0x65,
+ 0x28,
+ 0x0,
+ 0x0,
+ 0x23,
+ 0x28,
+ 0x10,
+ 0x0,
+ 0x21,
+ 0x34,
+ 0x1,
+ 0x0,
+ 0x84,
+ 0x34,
+ 0x2,
+ 0x0,
+ 0x82,
+ 0x54,
+ 0xf8,
+ 0xff,
+ 0xff,
+ 0xe3,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x0,
+ 0x0,
+ 0x4,
+ 0x34,
+ 0x9,
+ 0x0,
+ 0x83,
+ 0x50,
+ 0x1,
+ 0x0,
+ 0x5,
+ 0x78,
+ 0x0,
+ 0x0,
+ 0xa5,
+ 0x38,
+ 0x8,
+ 0x5,
+ 0x22,
+ 0xa8,
+ 0x0,
+ 0x8,
+ 0x25,
+ 0xb4,
+ 0x10,
+ 0x0,
+ 0x42,
+ 0x34,
+ 0x1,
+ 0x0,
+ 0x84,
+ 0x34,
+ 0x2,
+ 0x0,
+ 0x83,
+ 0x50,
+ 0xfb,
+ 0xff,
+ 0xff,
+ 0xe3,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x0,
+ 0x0,
+ 0x4,
+ 0x34,
+ 0x9,
+ 0x0,
+ 0x83,
+ 0x50,
+ 0x1,
+ 0x0,
+ 0x5,
+ 0x78,
+ 0x0,
+ 0x0,
+ 0xa5,
+ 0x38,
+ 0x8,
+ 0x15,
+ 0x20,
+ 0xa8,
+ 0x0,
+ 0x8,
+ 0x25,
+ 0xb4,
+ 0x10,
+ 0x0,
+ 0x42,
+ 0x34,
+ 0x1,
+ 0x0,
+ 0x84,
+ 0x34,
+ 0x2,
+ 0x0,
+ 0x83,
+ 0x50,
+ 0xfb,
+ 0xff,
+ 0xff,
+ 0xe3,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x0,
+ 0x20,
+ 0x20,
+ 0xb8,
+ 0xb0,
+ 0x0,
+ 0xa0,
+ 0x90,
+ 0x0,
+ 0x0,
+ 0x1,
+ 0x34,
+ 0xb0,
+ 0x0,
+ 0x20,
+ 0xd0,
+ 0x3,
+ 0x0,
+ 0x81,
+ 0x7c,
+ 0x8,
+ 0x0,
+ 0x20,
+ 0x5c,
+ 0x0,
+ 0x12,
+ 0x58,
+ 0xbc,
+ 0xff,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0xff,
+ 0xff,
+ 0x21,
+ 0x38,
+ 0x80,
+ 0x9,
+ 0xa1,
+ 0xa0,
+ 0x0,
+ 0x28,
+ 0x41,
+ 0xb8,
+ 0xf0,
+ 0x2,
+ 0x60,
+ 0xd0,
+ 0x18,
+ 0x0,
+ 0x0,
+ 0xe0,
+ 0x2,
+ 0x0,
+ 0x81,
+ 0x7c,
+ 0x8,
+ 0x0,
+ 0x20,
+ 0x5c,
+ 0x0,
+ 0x12,
+ 0x50,
+ 0xbc,
+ 0x0,
+ 0xff,
+ 0x1,
+ 0x78,
+ 0xff,
+ 0xff,
+ 0x21,
+ 0x38,
+ 0x80,
+ 0x9,
+ 0xa1,
+ 0xa0,
+ 0x0,
+ 0x28,
+ 0x41,
+ 0xb8,
+ 0xd0,
+ 0x2,
+ 0x60,
+ 0xd0,
+ 0xf,
+ 0x0,
+ 0x0,
+ 0xe0,
+ 0x1,
+ 0x0,
+ 0x81,
+ 0x7c,
+ 0x8,
+ 0x0,
+ 0x20,
+ 0x5c,
+ 0x0,
+ 0x12,
+ 0x48,
+ 0xbc,
+ 0xff,
+ 0xff,
+ 0x1,
+ 0x78,
+ 0xff,
+ 0x0,
+ 0x21,
+ 0x38,
+ 0x80,
+ 0x9,
+ 0xa1,
+ 0xa0,
+ 0x0,
+ 0x28,
+ 0x41,
+ 0xb8,
+ 0xb0,
+ 0x2,
+ 0x60,
+ 0xd0,
+ 0x6,
+ 0x0,
+ 0x0,
+ 0xe0,
+ 0x5,
+ 0x0,
+ 0x80,
+ 0x5c,
+ 0x0,
+ 0xff,
+ 0x1,
+ 0x34,
+ 0x80,
+ 0x29,
+ 0xa1,
+ 0xa0,
+ 0x0,
+ 0x28,
+ 0xa2,
+ 0xb8,
+ 0x90,
+ 0x2,
+ 0x60,
+ 0xd0,
+ 0xb0,
+ 0x0,
+ 0xa0,
+ 0xd0,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x0,
+ 0x10,
+ 0x20,
+ 0xb8,
+ 0x3,
+ 0x0,
+ 0x21,
+ 0x7c,
+ 0x4,
+ 0x0,
+ 0x20,
+ 0x5c,
+ 0x0,
+ 0x0,
+ 0x1,
+ 0x34,
+ 0xf0,
+ 0x2,
+ 0x20,
+ 0xd0,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x2,
+ 0x0,
+ 0x41,
+ 0x7c,
+ 0x4,
+ 0x0,
+ 0x20,
+ 0x5c,
+ 0x0,
+ 0x0,
+ 0x1,
+ 0x34,
+ 0xd0,
+ 0x2,
+ 0x20,
+ 0xd0,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x1,
+ 0x0,
+ 0x41,
+ 0x7c,
+ 0x4,
+ 0x0,
+ 0x20,
+ 0x5c,
+ 0x0,
+ 0x0,
+ 0x1,
+ 0x34,
+ 0xb0,
+ 0x2,
+ 0x20,
+ 0xd0,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x2,
+ 0x0,
+ 0x40,
+ 0x5c,
+ 0x90,
+ 0x2,
+ 0x40,
+ 0xd0,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x0,
+ 0x10,
+ 0x20,
+ 0xb8,
+ 0xb0,
+ 0x0,
+ 0x60,
+ 0x90,
+ 0x3,
+ 0x0,
+ 0x21,
+ 0x7c,
+ 0x6,
+ 0x0,
+ 0x20,
+ 0x5c,
+ 0xff,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0xff,
+ 0xff,
+ 0x21,
+ 0x38,
+ 0x80,
+ 0x19,
+ 0x61,
+ 0xa0,
+ 0xb0,
+ 0x0,
+ 0x60,
+ 0xd0,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x2,
+ 0x0,
+ 0x41,
+ 0x7c,
+ 0x6,
+ 0x0,
+ 0x20,
+ 0x5c,
+ 0x0,
+ 0xff,
+ 0x1,
+ 0x78,
+ 0xff,
+ 0xff,
+ 0x21,
+ 0x38,
+ 0x80,
+ 0x19,
+ 0x61,
+ 0xa0,
+ 0xb0,
+ 0x0,
+ 0x60,
+ 0xd0,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x1,
+ 0x0,
+ 0x41,
+ 0x7c,
+ 0x6,
+ 0x0,
+ 0x20,
+ 0x5c,
+ 0xff,
+ 0xff,
+ 0x1,
+ 0x78,
+ 0xff,
+ 0x0,
+ 0x21,
+ 0x38,
+ 0x80,
+ 0x19,
+ 0x61,
+ 0xa0,
+ 0xb0,
+ 0x0,
+ 0x60,
+ 0xd0,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x4,
+ 0x0,
+ 0x40,
+ 0x5c,
+ 0x0,
+ 0xff,
+ 0x1,
+ 0x34,
+ 0x80,
+ 0x19,
+ 0x61,
+ 0xa0,
+ 0xb0,
+ 0x0,
+ 0x60,
+ 0xd0,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x0,
+ 0x8,
+ 0xa0,
+ 0xbb,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x0,
+ 0x10,
+ 0x20,
+ 0xb8,
+ 0xff,
+ 0xff,
+ 0x42,
+ 0x34,
+ 0xff,
+ 0xff,
+ 0x41,
+ 0x64,
+ 0xfe,
+ 0xff,
+ 0x20,
+ 0x44,
+ 0x0,
+ 0x0,
+ 0xa0,
+ 0xc3,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0x0,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0x41,
+ 0x0,
+ 0x2,
+ 0x34,
+ 0x3,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0x4,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0x1,
+ 0x0,
+ 0x2,
+ 0x34,
+ 0x3,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0xd8,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0x3,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0xd8,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0x2,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0x74,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0x3,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0x0,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0x38,
+ 0x0,
+ 0x2,
+ 0x34,
+ 0x3,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0x4,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0x0,
+ 0x0,
+ 0x2,
+ 0x34,
+ 0x3,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0x0,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0x41,
+ 0x0,
+ 0x2,
+ 0x34,
+ 0x3,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0x4,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0x0,
+ 0x0,
+ 0x2,
+ 0x34,
+ 0x3,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0x0,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0x1,
+ 0x0,
+ 0x2,
+ 0x34,
+ 0x3,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0x4,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0xff,
+ 0x1,
+ 0x2,
+ 0x34,
+ 0x3,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0x0,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0x25,
+ 0x1,
+ 0x2,
+ 0x34,
+ 0x3,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x2,
+ 0x0,
+ 0x1,
+ 0x78,
+ 0x4,
+ 0x20,
+ 0x21,
+ 0x38,
+ 0x1,
+ 0x0,
+ 0x2,
+ 0x34,
+ 0x3,
+ 0x0,
+ 0x41,
+ 0xcc,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0xe0,
+};
+
+UINT32 SamuPatchKBHeaderUnf1[] = {
+ 0x53414d55,
+ 0x3e8
+};
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbSmuFirmwareKB.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbSmuFirmwareKB.h
new file mode 100644
index 0000000..62736a3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbSmuFirmwareKB.h
@@ -0,0 +1,32414 @@
+/**
+ * @file
+ *
+ * SMU firmware
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 87932 $ @e \$Date: 2013-02-13 13:53:55 -0600 (Wed, 13 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBSMUFIRMWAREKB_H_
+#define _GNBSMUFIRMWAREKB_H_
+
+UINT32 FirmwareKBHeader [] = {
+ 0x554D535F,
+ 0x554D535F,
+ 0x0001F984,
+ 0x00002000,
+ 0x00010000,
+ 0xECE28940,
+ 0x0000424B,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+UINT32 FirmwareKB[] = {
+ 0x63c00f17,
+ 0xb9cfd803,
+ 0x196410db,
+ 0x8c378d8b,
+ 0xa8f232ce,
+ 0x000c0d00,
+ 0x00000100,
+ 0x00000000,
+ 0x00020100,
+ 0x00019900,
+ 0x0001f954,
+ 0x000398d8,
+ 0x0003f900,
+ 0x0003f000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00038c00,
+ 0x00038fa8,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xaa55aa55,
+ 0x98000000,
+ 0xd0000000,
+ 0x78010002,
+ 0x38210100,
+ 0xd0e10000,
+ 0xd1210000,
+ 0xe00000c4,
+ 0x34000000,
+ 0x379cff80,
+ 0x5b9d0074,
+ 0xf8000059,
+ 0x34010001,
+ 0xf8002e56,
+ 0xe000009a,
+ 0x34000000,
+ 0x34000000,
+ 0x379cff80,
+ 0x5b9d0074,
+ 0xf8000051,
+ 0x34010002,
+ 0xf8002e4e,
+ 0x2b980060,
+ 0x2b990064,
+ 0xe000006f,
+ 0x379cff80,
+ 0x5b9d0074,
+ 0xf8000049,
+ 0x34010003,
+ 0xf8002e46,
+ 0xe000008a,
+ 0x34000000,
+ 0x34000000,
+ 0x379cff80,
+ 0x5b9d0074,
+ 0xf8000041,
+ 0x34010004,
+ 0xf8002e3e,
+ 0x2b980060,
+ 0x2b990064,
+ 0xe000005f,
+ 0x379cff80,
+ 0x5b9d0074,
+ 0xf8000039,
+ 0x34010005,
+ 0xf8002e36,
+ 0x2b980060,
+ 0x2b990064,
+ 0xe0000057,
+ 0xe00000ab,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x379cff80,
+ 0x5b9d0078,
+ 0xf8000006,
+ 0xbb800800,
+ 0xf800008d,
+ 0xe0000049,
+ 0x34000000,
+ 0x34000000,
+ 0x5b810004,
+ 0x5b820008,
+ 0x5b83000c,
+ 0x5b840010,
+ 0x5b850014,
+ 0x5b860018,
+ 0x5b87001c,
+ 0x5b880020,
+ 0x5b890024,
+ 0x5b8a0028,
+ 0x5b8b002c,
+ 0x5b8c0030,
+ 0x5b8d0034,
+ 0x5b8e0038,
+ 0x5b8f003c,
+ 0x5b900040,
+ 0x5b910044,
+ 0x5b920048,
+ 0x5b93004c,
+ 0x5b940050,
+ 0x5b950054,
+ 0x5b960058,
+ 0x5b97005c,
+ 0x5b9a0068,
+ 0x5b9b006c,
+ 0x2b810078,
+ 0x5b810074,
+ 0x5b9e0078,
+ 0x5b9f007c,
+ 0xbb800800,
+ 0x34210080,
+ 0x5b810070,
+ 0x98210800,
+ 0xd0010000,
+ 0xc3a00000,
+ 0x5b810004,
+ 0x5b820008,
+ 0x5b83000c,
+ 0x5b840010,
+ 0x5b850014,
+ 0x5b860018,
+ 0x5b87001c,
+ 0x5b880020,
+ 0x5b890024,
+ 0x5b8a0028,
+ 0x5b8b002c,
+ 0x5b8c0030,
+ 0x5b8d0034,
+ 0x5b8e0038,
+ 0x5b8f003c,
+ 0x5b900040,
+ 0x5b910044,
+ 0x5b920048,
+ 0x5b93004c,
+ 0x5b940050,
+ 0x5b950054,
+ 0x5b960058,
+ 0x5b97005c,
+ 0x5b980060,
+ 0x5b990064,
+ 0x5b9a0068,
+ 0x5b9b006c,
+ 0x5b9e0078,
+ 0x5b9f007c,
+ 0x37810080,
+ 0x5b810070,
+ 0x78018000,
+ 0x38210394,
+ 0x583c0000,
+ 0xc3a00000,
+ 0x34010002,
+ 0xd0010000,
+ 0x2b810004,
+ 0x2b820008,
+ 0x2b83000c,
+ 0x2b840010,
+ 0x2b850014,
+ 0x2b860018,
+ 0x2b87001c,
+ 0x2b880020,
+ 0x2b890024,
+ 0x2b8a0028,
+ 0x2b8b002c,
+ 0x2b8c0030,
+ 0x2b8d0034,
+ 0x2b8e0038,
+ 0x2b8f003c,
+ 0x2b900040,
+ 0x2b910044,
+ 0x2b920048,
+ 0x2b93004c,
+ 0x2b940050,
+ 0x2b950054,
+ 0x2b960058,
+ 0x2b97005c,
+ 0x2b9a0068,
+ 0x2b9b006c,
+ 0x2b9d0074,
+ 0x2b9e0078,
+ 0x2b9f007c,
+ 0x2b9c0070,
+ 0x34000000,
+ 0xc3c00000,
+ 0x2b810004,
+ 0x2b820008,
+ 0x2b83000c,
+ 0x2b840010,
+ 0x2b850014,
+ 0x2b860018,
+ 0x2b87001c,
+ 0x2b880020,
+ 0x2b890024,
+ 0x2b8a0028,
+ 0x2b8b002c,
+ 0x2b8c0030,
+ 0x2b8d0034,
+ 0x2b8e0038,
+ 0x2b8f003c,
+ 0x2b900040,
+ 0x2b910044,
+ 0x2b920048,
+ 0x2b93004c,
+ 0x2b940050,
+ 0x2b950054,
+ 0x2b960058,
+ 0x2b97005c,
+ 0x2b980060,
+ 0x2b990064,
+ 0x2b9a0068,
+ 0x2b9b006c,
+ 0x2b9d0074,
+ 0x2b9e0078,
+ 0x2b9f007c,
+ 0x2b9c0070,
+ 0x34000000,
+ 0xc3e00000,
+ 0xe0000000,
+ 0xc3a00000,
+ 0x781c0003,
+ 0x3b9ceffc,
+ 0x781a0004,
+ 0x3b5a0da0,
+ 0x78010003,
+ 0x38218db0,
+ 0x78030003,
+ 0x38638e70,
+ 0x44230004,
+ 0x58200000,
+ 0x34210004,
+ 0xe3fffffd,
+ 0x98210800,
+ 0x98421000,
+ 0x98631800,
+ 0xf8000473,
+ 0xe0000027,
+ 0x379cff80,
+ 0x5b9d0078,
+ 0xfbffff63,
+ 0x78010003,
+ 0x382198d8,
+ 0x28230004,
+ 0x28220000,
+ 0x34630001,
+ 0x585c0000,
+ 0x58230004,
+ 0xf800008b,
+ 0xf80048d4,
+ 0x78010003,
+ 0x382198d8,
+ 0x28230004,
+ 0x28220000,
+ 0x3463ffff,
+ 0x28220000,
+ 0x58230004,
+ 0x285c0000,
+ 0xe3ffff97,
+ 0xd0000000,
+ 0x379cff80,
+ 0x5b9d0078,
+ 0xb81df000,
+ 0xfbffff4c,
+ 0x78010003,
+ 0x382198d8,
+ 0x28230004,
+ 0x28220000,
+ 0x34630001,
+ 0x585c0000,
+ 0x58230004,
+ 0xe3ffffea,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xf80049d9,
+ 0xe0000000,
+ 0x99084000,
+ 0x39080001,
+ 0xac000007,
+ 0xe3fffffd,
+ 0x38080005,
+ 0xac000007,
+ 0xc3a00000,
+ 0x38080004,
+ 0xac000007,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x780cc020,
+ 0x780bc020,
+ 0x398c0080,
+ 0x396b0310,
+ 0x7801c020,
+ 0x38210134,
+ 0x34022000,
+ 0x34030001,
+ 0xf8001145,
+ 0x29830000,
+ 0x7801eeff,
+ 0x78021100,
+ 0x3821ffff,
+ 0x38420000,
+ 0xa0610800,
+ 0xa0621800,
+ 0x44600002,
+ 0x59810000,
+ 0x29610000,
+ 0x3402ffdf,
+ 0xa0221000,
+ 0x20210020,
+ 0x44200002,
+ 0x59620000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x78018000,
+ 0x38210008,
+ 0x34020001,
+ 0x58220000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xe3ffffd2,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x34020000,
+ 0x78010003,
+ 0x38218e94,
+ 0xf8004941,
+ 0xf8002804,
+ 0x7c210000,
+ 0x33010078,
+ 0x43010078,
+ 0x7c220000,
+ 0xe3fffff8,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x34020000,
+ 0x38218ea0,
+ 0xf8004935,
+ 0xf80010bd,
+ 0xe3fffffb,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x38218f30,
+ 0x34020000,
+ 0x58220024,
+ 0x58220020,
+ 0x78010003,
+ 0x34020000,
+ 0x38218e88,
+ 0xf8004928,
+ 0xf800382a,
+ 0xe3fffffb,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x38218f58,
+ 0x34020000,
+ 0x58220024,
+ 0x58220020,
+ 0x78010003,
+ 0x34020000,
+ 0x38218e7c,
+ 0xf800491b,
+ 0xf800395a,
+ 0xe3fffffb,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x7803c020,
+ 0x38630080,
+ 0x28620000,
+ 0x78011100,
+ 0x38210000,
+ 0xb8411000,
+ 0x7804c020,
+ 0x58620000,
+ 0x38840310,
+ 0x28820000,
+ 0x7801c020,
+ 0x38210134,
+ 0x38420020,
+ 0x58820000,
+ 0x34022000,
+ 0x34030000,
+ 0xf80010d9,
+ 0x90405800,
+ 0x90200800,
+ 0xa02b0800,
+ 0x20210004,
+ 0x44200002,
+ 0xf8000686,
+ 0xd04b0000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x7802e000,
+ 0x78010002,
+ 0x38423090,
+ 0x38210100,
+ 0x78050003,
+ 0x58410000,
+ 0x38a58e70,
+ 0x7804e000,
+ 0x38843094,
+ 0x34a5ffff,
+ 0x7806e000,
+ 0x78020002,
+ 0x58850000,
+ 0x38420000,
+ 0x78030003,
+ 0x38c63098,
+ 0x58c20000,
+ 0x3863f000,
+ 0x7801e000,
+ 0x3821309c,
+ 0x3463ffff,
+ 0x7802e000,
+ 0x58230000,
+ 0x384230a4,
+ 0x28410000,
+ 0x38210018,
+ 0x58410000,
+ 0xc3a00000,
+ 0xc3a00000,
+ 0x379cffac,
+ 0x5b8b003c,
+ 0x5b8c0038,
+ 0x5b8d0034,
+ 0x5b8e0030,
+ 0x5b8f002c,
+ 0x5b900028,
+ 0x5b910024,
+ 0x5b920020,
+ 0x5b93001c,
+ 0x5b940018,
+ 0x5b950014,
+ 0x5b960010,
+ 0x5b97000c,
+ 0x5b9b0008,
+ 0x5b9d0004,
+ 0x781dc010,
+ 0x3bbd0000,
+ 0x2ba54074,
+ 0x780100ff,
+ 0x38210000,
+ 0x00a80001,
+ 0x5b81004c,
+ 0x2ba54078,
+ 0x2b82004c,
+ 0x78017f00,
+ 0x2ba34078,
+ 0x38210000,
+ 0x3847ffff,
+ 0x00660001,
+ 0xb8271000,
+ 0x2ba3407c,
+ 0x3ca5001f,
+ 0x78048000,
+ 0x3c63001f,
+ 0x38840000,
+ 0xa0480800,
+ 0xa0641800,
+ 0xa0a42800,
+ 0xa0461000,
+ 0xb8250800,
+ 0xb8431000,
+ 0x00480018,
+ 0x00230008,
+ 0x00240010,
+ 0x00450008,
+ 0x00460010,
+ 0x00270018,
+ 0x781b0003,
+ 0x3b7b8c00,
+ 0x33630001,
+ 0x33680007,
+ 0x33610000,
+ 0x33640002,
+ 0x33670003,
+ 0x33650005,
+ 0x33660006,
+ 0x33620004,
+ 0x2b84004c,
+ 0x2ba240a0,
+ 0x7803ff00,
+ 0x38630000,
+ 0x3881ffff,
+ 0xb8610800,
+ 0x2ba540a4,
+ 0x5b830048,
+ 0xa0220800,
+ 0x00240018,
+ 0x00220008,
+ 0x00230010,
+ 0x33620009,
+ 0x3365000c,
+ 0x33610008,
+ 0x3363000a,
+ 0x3364000b,
+ 0x2ba340a4,
+ 0x2b86004c,
+ 0x78080003,
+ 0x00610008,
+ 0x38c2ffff,
+ 0x2ba340a8,
+ 0xa0411000,
+ 0x3908fa80,
+ 0x3c610018,
+ 0x2ba440a8,
+ 0x2b830048,
+ 0x5b880054,
+ 0x00840008,
+ 0xa0230800,
+ 0xb8411000,
+ 0x00410008,
+ 0x00450018,
+ 0x00430010,
+ 0x3361000e,
+ 0x3363000f,
+ 0x33650010,
+ 0x33640011,
+ 0x3362000d,
+ 0x2ba1407c,
+ 0x34060000,
+ 0x0f66001c,
+ 0x0021001c,
+ 0x0f66001e,
+ 0x20210001,
+ 0x33610012,
+ 0x2ba170c8,
+ 0x00210014,
+ 0x2021000f,
+ 0x33610013,
+ 0x2ba1407c,
+ 0x0022001d,
+ 0x2ba14080,
+ 0x3c210003,
+ 0x20210078,
+ 0xb8411000,
+ 0x33620014,
+ 0x2ba14080,
+ 0x00210004,
+ 0x2021007f,
+ 0x33610015,
+ 0x2ba14080,
+ 0x0021000b,
+ 0x20210007,
+ 0x33610016,
+ 0x2ba14080,
+ 0x0021000e,
+ 0x20210007,
+ 0x33610017,
+ 0x2ba14080,
+ 0x00210011,
+ 0x20210003,
+ 0x33610018,
+ 0x2ba14080,
+ 0x00210013,
+ 0x20210003,
+ 0x33610019,
+ 0x2ba1408c,
+ 0x00210015,
+ 0x202201ff,
+ 0x0f62001a,
+ 0x20410100,
+ 0x44260004,
+ 0x3401ff00,
+ 0xb8410800,
+ 0x0f61001a,
+ 0x2f62001c,
+ 0x20410100,
+ 0x44200004,
+ 0x3401ff00,
+ 0xb8410800,
+ 0x0f61001c,
+ 0x2f62001e,
+ 0x20410100,
+ 0x44200004,
+ 0x3401ff00,
+ 0xb8410800,
+ 0x0f61001e,
+ 0x34070000,
+ 0x33670026,
+ 0x33670027,
+ 0x2ba1408c,
+ 0x0f660034,
+ 0x0f660020,
+ 0x0022001e,
+ 0x0f660022,
+ 0x2ba14090,
+ 0x78160003,
+ 0x3ad6f000,
+ 0x3c210002,
+ 0x781700fc,
+ 0xb8220800,
+ 0x33610028,
+ 0x2ba24090,
+ 0x3af70000,
+ 0x3acd0fff,
+ 0x2ba14090,
+ 0x00420006,
+ 0x78083f00,
+ 0x00210012,
+ 0x204201ff,
+ 0x2021001f,
+ 0x33610029,
+ 0x2ba14090,
+ 0x0f620024,
+ 0x39080000,
+ 0x0021000f,
+ 0xbaed6800,
+ 0x20210007,
+ 0x3361002a,
+ 0x2ba14090,
+ 0xb90d6800,
+ 0x780c007c,
+ 0x00210017,
+ 0x3367002c,
+ 0x3367002d,
+ 0x3367002e,
+ 0x3367002f,
+ 0x33670030,
+ 0x33670031,
+ 0x3361002b,
+ 0x2ba340b8,
+ 0x398c0000,
+ 0x78040007,
+ 0x2ba140b4,
+ 0x00630008,
+ 0x3884c000,
+ 0x33670038,
+ 0x33670039,
+ 0x3367003a,
+ 0x3367003b,
+ 0x3367003c,
+ 0x3367003d,
+ 0x00210010,
+ 0x2ba240bc,
+ 0x0f630032,
+ 0x0f610036,
+ 0x0f62003e,
+ 0x2ba240bc,
+ 0x2b81004c,
+ 0x5b880044,
+ 0x00430018,
+ 0x3833ffff,
+ 0x2ba240c0,
+ 0x2b880048,
+ 0x38843fff,
+ 0x2ba140bc,
+ 0x3c420008,
+ 0x78050018,
+ 0x00210010,
+ 0xb8431000,
+ 0x33610042,
+ 0x2ba140c0,
+ 0x78030080,
+ 0x38630000,
+ 0x00210008,
+ 0x0f620040,
+ 0x33610043,
+ 0x2ba140b8,
+ 0x3ac20fff,
+ 0xb9826000,
+ 0x00210018,
+ 0xb840a800,
+ 0x33610044,
+ 0x2ba140c0,
+ 0x5b830040,
+ 0x38a50000,
+ 0x00210018,
+ 0x78060fe0,
+ 0x20210007,
+ 0x33610045,
+ 0x2ba140c0,
+ 0x38c60000,
+ 0x5b870050,
+ 0x00210010,
+ 0x7812001f,
+ 0x33610046,
+ 0x2ba140cc,
+ 0x3a52c000,
+ 0x3a523fff,
+ 0x00210015,
+ 0xb8d29000,
+ 0x33610047,
+ 0x2ba170d8,
+ 0xb9139800,
+ 0xba60a000,
+ 0x0022001f,
+ 0x2ba170dc,
+ 0x3c210001,
+ 0x33670049,
+ 0xb8220800,
+ 0x33610048,
+ 0x2ba140cc,
+ 0x0021001d,
+ 0x20210001,
+ 0x3361004a,
+ 0x2ba14090,
+ 0x0021001f,
+ 0x3361004b,
+ 0x2ba27080,
+ 0x0041000d,
+ 0x2ba27084,
+ 0xa0812000,
+ 0x3c410013,
+ 0xa0252800,
+ 0xa0260800,
+ 0xb8852000,
+ 0xb8812000,
+ 0x00830015,
+ 0x00810007,
+ 0x0082000e,
+ 0x2021007f,
+ 0x2042007f,
+ 0x2063007f,
+ 0x3361004d,
+ 0x3362004e,
+ 0x3363004f,
+ 0x3364004c,
+ 0x2ba17084,
+ 0x00210009,
+ 0x33670054,
+ 0x2021007f,
+ 0x33670055,
+ 0x33670056,
+ 0x33670057,
+ 0x33670058,
+ 0x33670059,
+ 0x3367005a,
+ 0x3367005b,
+ 0x3367005c,
+ 0x3367005d,
+ 0x3367005e,
+ 0x3367005f,
+ 0x33670060,
+ 0x33670061,
+ 0x33670062,
+ 0x33670063,
+ 0x33670051,
+ 0x33670052,
+ 0x33610050,
+ 0x2ba14094,
+ 0x2ba44094,
+ 0xa1a16800,
+ 0x01b10018,
+ 0x0085001e,
+ 0x01b00006,
+ 0x2ba44098,
+ 0x01ae000c,
+ 0x01af0012,
+ 0x2ba34098,
+ 0x3c840002,
+ 0x2210003f,
+ 0x0062001c,
+ 0x2081003c,
+ 0x2ba3409c,
+ 0xb8a12800,
+ 0x20810fc0,
+ 0x3c630004,
+ 0xb8a12800,
+ 0x20610030,
+ 0xb8411000,
+ 0x20610fc0,
+ 0xb8411000,
+ 0xa0960800,
+ 0xb8a12800,
+ 0xa0970800,
+ 0xb8a12800,
+ 0x2b810044,
+ 0xa0763000,
+ 0xb8461000,
+ 0xa0773000,
+ 0xa0812000,
+ 0xa0611800,
+ 0xb8461000,
+ 0xb8a42800,
+ 0xb8431000,
+ 0x00a30006,
+ 0x00a4000c,
+ 0x00a60012,
+ 0x00aa0018,
+ 0x00480006,
+ 0x0049000c,
+ 0x004b0012,
+ 0x2063003f,
+ 0x2084003f,
+ 0x00410018,
+ 0x21ce003f,
+ 0x21ef003f,
+ 0x2231003f,
+ 0x21ad003f,
+ 0x20c6003f,
+ 0x3363006a,
+ 0x3364006b,
+ 0x336d0064,
+ 0x33700065,
+ 0x336e0066,
+ 0x336f0067,
+ 0x33710068,
+ 0x3366006c,
+ 0x2108003f,
+ 0x2042003f,
+ 0x2021003f,
+ 0x214a003f,
+ 0x2129003f,
+ 0x216b003f,
+ 0x3368006f,
+ 0x33650069,
+ 0x336a006d,
+ 0x3362006e,
+ 0x33690070,
+ 0x336b0071,
+ 0x33610072,
+ 0x2ba1409c,
+ 0x0021001a,
+ 0x33610073,
+ 0x2ba140b8,
+ 0x33610081,
+ 0x2ba140b4,
+ 0x00210008,
+ 0x33670053,
+ 0x33610080,
+ 0x2ba26000,
+ 0x2b84004c,
+ 0x2b860048,
+ 0x00410018,
+ 0x2ba26004,
+ 0x3c420008,
+ 0x2043ff00,
+ 0xb8230800,
+ 0xa0441800,
+ 0xa0461000,
+ 0xb8230800,
+ 0xb8220800,
+ 0x00240018,
+ 0x00220008,
+ 0x00230010,
+ 0x33640077,
+ 0x33630076,
+ 0x33620075,
+ 0x33610074,
+ 0x2ba16008,
+ 0x2ba2600c,
+ 0xa2619800,
+ 0x02650018,
+ 0xa282a000,
+ 0x02860018,
+ 0x02610008,
+ 0x02620010,
+ 0x02830008,
+ 0x02840010,
+ 0x3362007a,
+ 0x3365007b,
+ 0x3363007d,
+ 0x3364007e,
+ 0x3366007f,
+ 0x33610079,
+ 0x33730078,
+ 0x3374007c,
+ 0x2ba16014,
+ 0x00210008,
+ 0x20210001,
+ 0x33610099,
+ 0x2ba16020,
+ 0x2b880044,
+ 0x2ba37044,
+ 0x00210003,
+ 0x00620019,
+ 0x202103ff,
+ 0x2ba37048,
+ 0x0f610082,
+ 0x2ba47048,
+ 0x3c630007,
+ 0x00850017,
+ 0x20610f80,
+ 0x2ba4704c,
+ 0xb8411000,
+ 0xa0760800,
+ 0xb8411000,
+ 0xa0770800,
+ 0x3c840009,
+ 0xb8411000,
+ 0xa0681800,
+ 0x20810e00,
+ 0xb8431000,
+ 0xb8a12800,
+ 0xa0962000,
+ 0x00410006,
+ 0x00470018,
+ 0x0043000c,
+ 0xb8a42800,
+ 0x2046003f,
+ 0x00a8000c,
+ 0x00a40006,
+ 0x00420012,
+ 0x2021003f,
+ 0x2063003f,
+ 0x2042003f,
+ 0x20e7003f,
+ 0x2084003f,
+ 0x2108003f,
+ 0x20a5003f,
+ 0x33610085,
+ 0x33670088,
+ 0x33650089,
+ 0x3368008b,
+ 0x33660084,
+ 0x33630086,
+ 0x33620087,
+ 0x3364008a,
+ 0x2ba3704c,
+ 0x2b840040,
+ 0x2b860044,
+ 0x00610009,
+ 0x2ba37050,
+ 0xa1816000,
+ 0x2ba27050,
+ 0x3c610017,
+ 0x00420007,
+ 0xa0241800,
+ 0xa0260800,
+ 0xb9836000,
+ 0xb9816000,
+ 0xa2a2a800,
+ 0x01850018,
+ 0x02a6000c,
+ 0x01810006,
+ 0x0182000c,
+ 0x01830012,
+ 0x02a40006,
+ 0x2021003f,
+ 0x2042003f,
+ 0x2063003f,
+ 0x20a5003f,
+ 0x2084003f,
+ 0x20c6003f,
+ 0x218c003f,
+ 0x22b5003f,
+ 0x3362008e,
+ 0x3363008f,
+ 0x33650090,
+ 0x33640092,
+ 0x33660093,
+ 0x336c008c,
+ 0x3361008d,
+ 0x33750091,
+ 0x2ba17060,
+ 0x00210001,
+ 0x3361009a,
+ 0x2ba1707c,
+ 0xa2419000,
+ 0x02410007,
+ 0x0242000e,
+ 0x02430015,
+ 0x2021007f,
+ 0x2042007f,
+ 0x2063007f,
+ 0x33610095,
+ 0x33620096,
+ 0x33630097,
+ 0x33720094,
+ 0x2ba1707c,
+ 0x0022001c,
+ 0x2ba17080,
+ 0x3c210004,
+ 0x20210070,
+ 0xb8411000,
+ 0x33620098,
+ 0x2ba240ac,
+ 0x00440018,
+ 0x2ba240b0,
+ 0x2ba340b0,
+ 0x3c420008,
+ 0x2ba170d0,
+ 0x00630008,
+ 0xb8441000,
+ 0x00210002,
+ 0x0f63009e,
+ 0x2021000f,
+ 0x3361009b,
+ 0x2ba34004,
+ 0x0f62009c,
+ 0x2b88004c,
+ 0x0061001d,
+ 0x2ba34008,
+ 0x3c630003,
+ 0x206200f8,
+ 0xb8220800,
+ 0x2062ff00,
+ 0xb8220800,
+ 0xa0681000,
+ 0xb8220800,
+ 0x2b820048,
+ 0xa0621800,
+ 0xb8230800,
+ 0x00240018,
+ 0x00220008,
+ 0x00230010,
+ 0x336200a1,
+ 0x336300a2,
+ 0x336400a3,
+ 0x336100a0,
+ 0x2ba1407c,
+ 0x00210014,
+ 0x336100a4,
+ 0x2ba140a8,
+ 0x00220010,
+ 0x2ba140ac,
+ 0x3c210010,
+ 0xa0281800,
+ 0xb8431000,
+ 0x2b830048,
+ 0xa0230800,
+ 0xb8411000,
+ 0x00440018,
+ 0x00410008,
+ 0x00430010,
+ 0x336400a8,
+ 0x336300a7,
+ 0x336200a5,
+ 0x336100a6,
+ 0x2ba140ac,
+ 0x00210010,
+ 0x336100a9,
+ 0x2ba17040,
+ 0x00210004,
+ 0x336100aa,
+ 0x2ba1408c,
+ 0x00210002,
+ 0x20210001,
+ 0x336100ab,
+ 0x2ba37050,
+ 0x00610019,
+ 0x2ba37054,
+ 0x2ba67054,
+ 0x3c630007,
+ 0x00c50017,
+ 0x20620f80,
+ 0x2ba67058,
+ 0xb8220800,
+ 0xa0762000,
+ 0x3cc20009,
+ 0xb8240800,
+ 0x2b860044,
+ 0x20440e00,
+ 0xa077b800,
+ 0xa0661800,
+ 0xb8a42800,
+ 0xa0561000,
+ 0xb8370800,
+ 0xb8230800,
+ 0xb8a22800,
+ 0x00270018,
+ 0x00a8000c,
+ 0x00220006,
+ 0x0023000c,
+ 0x00240012,
+ 0x00a60006,
+ 0x2042003f,
+ 0x2063003f,
+ 0x2084003f,
+ 0x2021003f,
+ 0x20e7003f,
+ 0x20c6003f,
+ 0x2108003f,
+ 0x20a5003f,
+ 0x336200ad,
+ 0x336300ae,
+ 0x336400af,
+ 0x336100ac,
+ 0x336700b0,
+ 0x336500b1,
+ 0x336600b2,
+ 0x336800b3,
+ 0x2ba140cc,
+ 0x0021000d,
+ 0x336100b4,
+ 0x2ba1408c,
+ 0x00210005,
+ 0x336100b5,
+ 0x2ba1408c,
+ 0x0021000d,
+ 0x336100b6,
+ 0x2ba140c8,
+ 0x0021000b,
+ 0x336100b7,
+ 0x2ba140c8,
+ 0x00210003,
+ 0x336100b8,
+ 0x2ba14070,
+ 0x00210011,
+ 0x336100b9,
+ 0x2ba140c8,
+ 0x0022001b,
+ 0x2ba140cc,
+ 0x3c210005,
+ 0xb8220800,
+ 0x336100ba,
+ 0x2ba140c0,
+ 0x0022001b,
+ 0x2ba140c4,
+ 0x3c210005,
+ 0xb8220800,
+ 0x336100bb,
+ 0x2ba140c8,
+ 0x00210013,
+ 0x336100bc,
+ 0x2ba140c4,
+ 0x00210003,
+ 0x336100bd,
+ 0x2ba14070,
+ 0x00220019,
+ 0x2ba14074,
+ 0x3c210007,
+ 0xb8220800,
+ 0x336100be,
+ 0x2ba140c4,
+ 0x0021000b,
+ 0x336100bf,
+ 0x2ba24088,
+ 0x00440019,
+ 0x2ba2408c,
+ 0x2ba3705c,
+ 0x3c420007,
+ 0x2ba17044,
+ 0x20420180,
+ 0xb8822000,
+ 0x00210010,
+ 0x00630005,
+ 0x20210007,
+ 0x336100c4,
+ 0x2ba140c4,
+ 0x0f6400c0,
+ 0x0f6300c2,
+ 0x00220013,
+ 0x2ba140c8,
+ 0x3c21000d,
+ 0xb8220800,
+ 0x0f6100c6,
+ 0x2b880050,
+ 0x3d020002,
+ 0xb45b0800,
+ 0x28230000,
+ 0x35080001,
+ 0x5b880050,
+ 0x2b810054,
+ 0xb4411000,
+ 0x75010031,
+ 0x58430000,
+ 0x4420fff6,
+ 0x2b8b003c,
+ 0x2b8c0038,
+ 0x2b8d0034,
+ 0x2b8e0030,
+ 0x2b8f002c,
+ 0x2b900028,
+ 0x2b910024,
+ 0x2b920020,
+ 0x2b93001c,
+ 0x2b940018,
+ 0x2b950014,
+ 0x2b960010,
+ 0x2b97000c,
+ 0x2b9b0008,
+ 0x2b9d0004,
+ 0x379c0054,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0xf8004681,
+ 0x780b0003,
+ 0x34040000,
+ 0x396beffc,
+ 0x78010003,
+ 0x3563fc00,
+ 0xb8802800,
+ 0xb8803000,
+ 0x34020003,
+ 0x38218ee0,
+ 0xf800464f,
+ 0x356bfbfc,
+ 0x78010003,
+ 0x78050002,
+ 0x3563ff00,
+ 0xb9602000,
+ 0x34020007,
+ 0x34060000,
+ 0x38218eb8,
+ 0x38a5052c,
+ 0x780cc00c,
+ 0xf8004644,
+ 0x398c0000,
+ 0x29820000,
+ 0x78010100,
+ 0x38210000,
+ 0xa0411000,
+ 0x00460018,
+ 0x356bfefc,
+ 0x5cc0000a,
+ 0x78010003,
+ 0x78050003,
+ 0x3563fc00,
+ 0xb9602000,
+ 0x38218f80,
+ 0x38a57214,
+ 0x34020006,
+ 0xf8004634,
+ 0x356bfbfc,
+ 0x78010003,
+ 0x78050002,
+ 0x3563fe00,
+ 0xb9602000,
+ 0x38a50608,
+ 0x34020004,
+ 0x34060000,
+ 0x38218f08,
+ 0xf800462a,
+ 0x356bfdfc,
+ 0x78010003,
+ 0x78050002,
+ 0x3563fe00,
+ 0xb9602000,
+ 0x38a50658,
+ 0x34020002,
+ 0x34060000,
+ 0x38218f30,
+ 0xf8004620,
+ 0x356bfdfc,
+ 0x78010003,
+ 0x78050002,
+ 0x34020001,
+ 0x3563fe00,
+ 0x38218f58,
+ 0xb9602000,
+ 0x38a5068c,
+ 0x34060000,
+ 0xf8004616,
+ 0x29830000,
+ 0x78020003,
+ 0x78010003,
+ 0x384298d8,
+ 0x38218ee0,
+ 0x58410000,
+ 0x20630002,
+ 0x5c60000a,
+ 0x78010002,
+ 0x382102fc,
+ 0xb7211800,
+ 0x28620000,
+ 0x7801ffef,
+ 0x3821ffff,
+ 0x38420010,
+ 0xa0411000,
+ 0x58620000,
+ 0x78038000,
+ 0x78018000,
+ 0x38630180,
+ 0x38210040,
+ 0x78028000,
+ 0x58610000,
+ 0x3842000c,
+ 0x28410000,
+ 0x78048000,
+ 0x38840100,
+ 0x34010004,
+ 0x58410000,
+ 0x28810000,
+ 0x7803bfff,
+ 0x3863ffff,
+ 0xa0230800,
+ 0x78028000,
+ 0x58810000,
+ 0x38420110,
+ 0x28410000,
+ 0xa0230800,
+ 0x58410000,
+ 0xf800467d,
+ 0xf8000334,
+ 0xf8001b4b,
+ 0x7803c020,
+ 0x38630000,
+ 0x28620000,
+ 0x7801fffe,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x58620000,
+ 0xfbfffc9e,
+ 0x34010000,
+ 0xb8201000,
+ 0xb8201800,
+ 0xb8202800,
+ 0xb8203000,
+ 0xb8203800,
+ 0x34040037,
+ 0xf80046e0,
+ 0x34010000,
+ 0xb8202800,
+ 0xb8203000,
+ 0xb8203800,
+ 0xb8201000,
+ 0xb8201800,
+ 0x34040037,
+ 0xf8004719,
+ 0x78010003,
+ 0x3821f900,
+ 0x28230000,
+ 0x28220004,
+ 0x88431000,
+ 0x34010000,
+ 0x34030064,
+ 0x34420032,
+ 0x8c431000,
+ 0xf800467f,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x78018000,
+ 0x34030001,
+ 0x3821001c,
+ 0x78028000,
+ 0x58230000,
+ 0x38420024,
+ 0x58430000,
+ 0x78018000,
+ 0x3821003c,
+ 0x78028000,
+ 0x58230000,
+ 0x38420044,
+ 0x58430000,
+ 0x78018000,
+ 0x3821004c,
+ 0x78028000,
+ 0x58230000,
+ 0x38420054,
+ 0x58430000,
+ 0x78018000,
+ 0x3821005c,
+ 0x78028000,
+ 0x58230000,
+ 0x38420064,
+ 0x58430000,
+ 0x7801c210,
+ 0x38210004,
+ 0x34020003,
+ 0x58220000,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x78180003,
+ 0x3b188fa8,
+ 0xfbfffc3e,
+ 0x780b0003,
+ 0xb9601000,
+ 0x3842f800,
+ 0x34010000,
+ 0x58410000,
+ 0xd0010000,
+ 0xd0210000,
+ 0xfbffff3c,
+ 0xf800044f,
+ 0x7801c00c,
+ 0x38210000,
+ 0x28220000,
+ 0x78010100,
+ 0x38210000,
+ 0xa0411000,
+ 0x00420018,
+ 0x5c400002,
+ 0xf800571c,
+ 0x78010003,
+ 0x78020003,
+ 0x3821ec00,
+ 0x3842edfc,
+ 0xf8003130,
+ 0x34010004,
+ 0xd0210000,
+ 0x34010001,
+ 0xd0010000,
+ 0xfbffffc1,
+ 0x396bf800,
+ 0x34010001,
+ 0x59610000,
+ 0x34010000,
+ 0xfbfffbdc,
+ 0x34010000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0xb8202000,
+ 0x6821001f,
+ 0x78030003,
+ 0x78068000,
+ 0x78078000,
+ 0x5c20000c,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x386398d8,
+ 0x28620034,
+ 0x34010001,
+ 0xbc240800,
+ 0xb8411000,
+ 0x58620034,
+ 0xd0050000,
+ 0xe000000b,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x386398d8,
+ 0x28620038,
+ 0x34010001,
+ 0xbc240800,
+ 0xb8411000,
+ 0x58620038,
+ 0xd0050000,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x78020003,
+ 0x384298d8,
+ 0x28440000,
+ 0x28410034,
+ 0x38c68000,
+ 0x28830020,
+ 0x38e78004,
+ 0xa0230800,
+ 0x58c10000,
+ 0x28410038,
+ 0x28820024,
+ 0xa0220800,
+ 0x58e10000,
+ 0xd0050000,
+ 0xc3a00000,
+ 0xb8201000,
+ 0x6821001f,
+ 0x78030003,
+ 0x78068000,
+ 0x78078000,
+ 0x5c20000d,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xbc220800,
+ 0x386398d8,
+ 0x28620034,
+ 0xa4200800,
+ 0xa0411000,
+ 0x58620034,
+ 0xd0050000,
+ 0xe000000c,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xbc220800,
+ 0x386398d8,
+ 0x28620038,
+ 0xa4200800,
+ 0xa0411000,
+ 0x58620038,
+ 0xd0050000,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x78020003,
+ 0x384298d8,
+ 0x28440000,
+ 0x28410034,
+ 0x38c68000,
+ 0x28830020,
+ 0x38e78004,
+ 0xa0230800,
+ 0x58c10000,
+ 0x28410038,
+ 0x28820024,
+ 0xa0220800,
+ 0x58e10000,
+ 0xd0050000,
+ 0xc3a00000,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x78020003,
+ 0x384298d8,
+ 0x34030000,
+ 0x28440000,
+ 0x78018000,
+ 0x58430038,
+ 0x58430034,
+ 0x38218000,
+ 0x58230000,
+ 0x28420038,
+ 0x28830024,
+ 0x78018000,
+ 0x38218004,
+ 0xa0431000,
+ 0x58220000,
+ 0xd0050000,
+ 0xc3a00000,
+ 0x90001800,
+ 0x34020000,
+ 0xd0020000,
+ 0x28240000,
+ 0x78020003,
+ 0x384298d8,
+ 0x58440034,
+ 0x28210004,
+ 0x58410038,
+ 0xd0030000,
+ 0xc3a00000,
+ 0xb8202000,
+ 0x6821001f,
+ 0x78030003,
+ 0x78068000,
+ 0x78078000,
+ 0x5c20000d,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x386398d8,
+ 0x28630000,
+ 0x34020001,
+ 0xbc441000,
+ 0x28610020,
+ 0xb8220800,
+ 0x58610020,
+ 0xd0050000,
+ 0xe000000c,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x386398d8,
+ 0x28630000,
+ 0x34020001,
+ 0xbc441000,
+ 0x28610024,
+ 0xb8220800,
+ 0x58610024,
+ 0xd0050000,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x78020003,
+ 0x384298d8,
+ 0x28440000,
+ 0x28410034,
+ 0x38c68000,
+ 0x28830020,
+ 0x38e78004,
+ 0xa0230800,
+ 0x58c10000,
+ 0x28410038,
+ 0x28820024,
+ 0xa0220800,
+ 0x58e10000,
+ 0xd0050000,
+ 0xc3a00000,
+ 0xb8201000,
+ 0x6821001f,
+ 0x78030003,
+ 0x78068000,
+ 0x78078000,
+ 0x5c20000e,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x386398d8,
+ 0x28630000,
+ 0x34010001,
+ 0xbc220800,
+ 0x28620020,
+ 0xa4200800,
+ 0xa0411000,
+ 0x58620020,
+ 0xd0050000,
+ 0xe000000d,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x386398d8,
+ 0x28630000,
+ 0x34010001,
+ 0xbc220800,
+ 0x28620024,
+ 0xa4200800,
+ 0xa0411000,
+ 0x58620024,
+ 0xd0050000,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x78020003,
+ 0x384298d8,
+ 0x28440000,
+ 0x28410034,
+ 0x38c68000,
+ 0x28830020,
+ 0x38e78004,
+ 0xa0230800,
+ 0x58c10000,
+ 0x28410038,
+ 0x28820024,
+ 0xa0220800,
+ 0x58e10000,
+ 0xd0050000,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x38218ea0,
+ 0xf80043fa,
+ 0xf80043a6,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x7802c210,
+ 0x34040001,
+ 0x38420004,
+ 0x7801c210,
+ 0x58440000,
+ 0x38210000,
+ 0x28220000,
+ 0x34030000,
+ 0x78010001,
+ 0x3821fffe,
+ 0xa0411000,
+ 0x80441000,
+ 0x7801c210,
+ 0x5b02006c,
+ 0x3821003c,
+ 0x28220000,
+ 0x5b020070,
+ 0x33040074,
+ 0x78010003,
+ 0x33030075,
+ 0x38218e94,
+ 0xf80043de,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x38218e88,
+ 0xf80043d6,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x38218e7c,
+ 0xf80043ce,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x3821f300,
+ 0x28220000,
+ 0x78010008,
+ 0x38210000,
+ 0xa0411000,
+ 0x004b0013,
+ 0x65610001,
+ 0x44200051,
+ 0xf80046b9,
+ 0xb8206000,
+ 0xf80046ce,
+ 0x01810011,
+ 0x34030000,
+ 0x20210001,
+ 0xe4230800,
+ 0xb8602000,
+ 0xb8606800,
+ 0x5c230006,
+ 0x78010003,
+ 0x38218de0,
+ 0x302b0012,
+ 0xb9606800,
+ 0xb9602000,
+ 0x21814000,
+ 0x4420000b,
+ 0x78010003,
+ 0x38218de0,
+ 0x78020003,
+ 0x302b0010,
+ 0x3842f320,
+ 0x28410000,
+ 0x38840002,
+ 0xb9601800,
+ 0x38210040,
+ 0x58410000,
+ 0x21812000,
+ 0x4420000d,
+ 0x78010003,
+ 0x38218de0,
+ 0x34020000,
+ 0x78030003,
+ 0x30220010,
+ 0x3863f320,
+ 0x28610000,
+ 0x3402ffbf,
+ 0x38840004,
+ 0xa0220800,
+ 0x58610000,
+ 0x34030000,
+ 0x78010003,
+ 0x3821f320,
+ 0x28210000,
+ 0x20210080,
+ 0x44200007,
+ 0x78020050,
+ 0x38420000,
+ 0x7801c020,
+ 0xb8821000,
+ 0x3821012c,
+ 0x58220000,
+ 0x44600004,
+ 0x78010003,
+ 0x38218eac,
+ 0xf8004385,
+ 0x45a0000f,
+ 0x78030003,
+ 0x38638de0,
+ 0x40610015,
+ 0x4420000b,
+ 0x40620010,
+ 0x34010000,
+ 0x30610012,
+ 0x306b0013,
+ 0x306b000f,
+ 0x30610015,
+ 0x44410004,
+ 0x78010003,
+ 0x38218eac,
+ 0xf8004376,
+ 0x34010001,
+ 0x3301007b,
+ 0x3c21001a,
+ 0x78028000,
+ 0x38428000,
+ 0x58410050,
+ 0x34010000,
+ 0x34022800,
+ 0xf80045d2,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x3821f300,
+ 0x28220000,
+ 0x78010010,
+ 0x38210000,
+ 0xa0411000,
+ 0x004b0014,
+ 0x65610001,
+ 0x4420004f,
+ 0xf8004662,
+ 0xb8201800,
+ 0x00210011,
+ 0x34040000,
+ 0x20210001,
+ 0xe4240800,
+ 0xb8802800,
+ 0xb8806000,
+ 0x5c240006,
+ 0x78010003,
+ 0x38218de0,
+ 0x302b0012,
+ 0xb9606000,
+ 0xb9602800,
+ 0x20614000,
+ 0x4420000b,
+ 0x78010003,
+ 0x38218de0,
+ 0x78020003,
+ 0x302b0010,
+ 0x3842f320,
+ 0x28410000,
+ 0x38a50002,
+ 0xb9602000,
+ 0x38210040,
+ 0x58410000,
+ 0x20612000,
+ 0x4420000d,
+ 0x78010003,
+ 0x38218de0,
+ 0x34020000,
+ 0x78030003,
+ 0x30220010,
+ 0x3863f320,
+ 0x28610000,
+ 0x3402ffbf,
+ 0x38a50004,
+ 0xa0220800,
+ 0x58610000,
+ 0x34040000,
+ 0x78010003,
+ 0x3821f320,
+ 0x28210000,
+ 0x20210080,
+ 0x44200007,
+ 0x78020060,
+ 0x38420000,
+ 0x7801c020,
+ 0xb8a21000,
+ 0x3821012c,
+ 0x58220000,
+ 0x44800004,
+ 0x78010003,
+ 0x38218eac,
+ 0xf8004323,
+ 0x4580000f,
+ 0x78030003,
+ 0x38638de0,
+ 0x40610015,
+ 0x4420000b,
+ 0x40620010,
+ 0x34010000,
+ 0x30610012,
+ 0x306b0014,
+ 0x306b000f,
+ 0x30610015,
+ 0x44410004,
+ 0x78010003,
+ 0x38218eac,
+ 0xf8004314,
+ 0x34010001,
+ 0x78028000,
+ 0x3c240019,
+ 0x38428000,
+ 0x3301007b,
+ 0x58440050,
+ 0x34022800,
+ 0xf8004588,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78030003,
+ 0x38638de0,
+ 0x40620016,
+ 0x34050001,
+ 0x34040000,
+ 0x3401003c,
+ 0x44440007,
+ 0x30640016,
+ 0x3065000f,
+ 0xfbfffe4f,
+ 0x78010003,
+ 0x38218eac,
+ 0xf80042f8,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78018000,
+ 0x38210018,
+ 0x28220000,
+ 0x34030000,
+ 0x78018000,
+ 0x5b020000,
+ 0x38210068,
+ 0x28210000,
+ 0x34020001,
+ 0x5b010004,
+ 0x33020008,
+ 0x78010003,
+ 0x33030009,
+ 0x38218e94,
+ 0xf80042e4,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78018000,
+ 0x38210020,
+ 0x28220000,
+ 0x34030000,
+ 0x78018000,
+ 0x5b02000c,
+ 0x3821006c,
+ 0x28210000,
+ 0x34020001,
+ 0x5b010010,
+ 0x33020014,
+ 0x78010003,
+ 0x33030015,
+ 0x38218e94,
+ 0xf80042d0,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78018000,
+ 0x38210038,
+ 0x28220000,
+ 0x34030000,
+ 0x78018000,
+ 0x5b020018,
+ 0x38210070,
+ 0x28210000,
+ 0x34020001,
+ 0x5b01001c,
+ 0x33020020,
+ 0x78010003,
+ 0x33030021,
+ 0x38218e94,
+ 0xf80042bc,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78018000,
+ 0x38210040,
+ 0x28220000,
+ 0x34030000,
+ 0x78018000,
+ 0x5b020024,
+ 0x38210074,
+ 0x28210000,
+ 0x34020001,
+ 0x5b010028,
+ 0x3302002c,
+ 0x78010003,
+ 0x3303002d,
+ 0x38218e94,
+ 0xf80042a8,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78018000,
+ 0x38210048,
+ 0x28220000,
+ 0x34030000,
+ 0x78018000,
+ 0x5b020030,
+ 0x38210078,
+ 0x28210000,
+ 0x34020001,
+ 0x5b010034,
+ 0x33020038,
+ 0x78010003,
+ 0x33030039,
+ 0x38218e94,
+ 0xf8004294,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78018000,
+ 0x38210050,
+ 0x28220000,
+ 0x34030000,
+ 0x78018000,
+ 0x5b02003c,
+ 0x3821007c,
+ 0x28210000,
+ 0x34020001,
+ 0x5b010040,
+ 0x33020044,
+ 0x78010003,
+ 0x33030045,
+ 0x38218e94,
+ 0xf8004280,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78018000,
+ 0x38210058,
+ 0x28220000,
+ 0x34030000,
+ 0x78018000,
+ 0x5b020048,
+ 0x38210080,
+ 0x28210000,
+ 0x34020001,
+ 0x5b01004c,
+ 0x33020050,
+ 0x78010003,
+ 0x33030051,
+ 0x38218e94,
+ 0xf800426c,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78018000,
+ 0x38210060,
+ 0x28220000,
+ 0x34030000,
+ 0x78018000,
+ 0x5b020054,
+ 0x38210084,
+ 0x28210000,
+ 0x34020001,
+ 0x5b010058,
+ 0x3302005c,
+ 0x78010003,
+ 0x3303005d,
+ 0x38218e94,
+ 0xf8004258,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78018000,
+ 0x38210120,
+ 0x28220000,
+ 0x34030001,
+ 0x78018000,
+ 0x5b020060,
+ 0x38210140,
+ 0x28220000,
+ 0x78010003,
+ 0x5b020064,
+ 0x33030068,
+ 0x38218e94,
+ 0xf8004246,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0x78018000,
+ 0x38218000,
+ 0x28210058,
+ 0x5c20001c,
+ 0x780c8000,
+ 0xb9806800,
+ 0x39ad8000,
+ 0x29ab005c,
+ 0x78018000,
+ 0x38210430,
+ 0x582b0000,
+ 0x3d630002,
+ 0x78020003,
+ 0x384289cc,
+ 0x34010000,
+ 0xb4621800,
+ 0x3301007b,
+ 0x28610000,
+ 0xd8200000,
+ 0x4301007b,
+ 0x6963001f,
+ 0x5c200007,
+ 0x34010001,
+ 0xbc2b1000,
+ 0x5c600003,
+ 0x59a20050,
+ 0xe0000002,
+ 0x59a20054,
+ 0x398c8000,
+ 0x29810058,
+ 0xe3ffffe5,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0x780d0003,
+ 0xb9a01000,
+ 0x3842899c,
+ 0x10410000,
+ 0x340b0000,
+ 0x6421ffff,
+ 0x5c2b0014,
+ 0xb8406000,
+ 0xb9a00800,
+ 0xb56b1800,
+ 0x3821899c,
+ 0xb4611800,
+ 0x10610000,
+ 0x78028000,
+ 0x38428000,
+ 0xb5621000,
+ 0x30410010,
+ 0x10620001,
+ 0x358c0002,
+ 0x356b0001,
+ 0x7c420001,
+ 0x5c400002,
+ 0xfbfffd24,
+ 0x11810000,
+ 0x6421ffff,
+ 0x4420ffef,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0xb8206800,
+ 0x44200029,
+ 0x780b0003,
+ 0x34010190,
+ 0x502d0008,
+ 0x396bf900,
+ 0x29620004,
+ 0xb5a20800,
+ 0x3421ffff,
+ 0x8c220800,
+ 0xf80041c1,
+ 0xe000001f,
+ 0xf800435d,
+ 0xb9604800,
+ 0x3929f900,
+ 0x29250000,
+ 0x34080064,
+ 0xb8402000,
+ 0x89a52800,
+ 0xb8201800,
+ 0x34060000,
+ 0x34a50032,
+ 0x8ca82800,
+ 0xb4660800,
+ 0xb4451000,
+ 0xf4822800,
+ 0xb8406000,
+ 0xb4a12800,
+ 0xb8a05800,
+ 0x34010009,
+ 0x502d0007,
+ 0x29220004,
+ 0x35a1fffa,
+ 0x00430001,
+ 0xb4230800,
+ 0x8c220800,
+ 0xf80041a7,
+ 0xf8004344,
+ 0xb8201800,
+ 0x5563fffe,
+ 0x5d630002,
+ 0x5582fffc,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78020003,
+ 0x3842f900,
+ 0x28420000,
+ 0x88220800,
+ 0x34020064,
+ 0x34210032,
+ 0x8c220800,
+ 0xf8004340,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x206300ff,
+ 0x88431000,
+ 0x88231800,
+ 0x00420008,
+ 0x00630008,
+ 0xb4220800,
+ 0xc8230800,
+ 0xc3a00000,
+ 0x88432800,
+ 0x88230800,
+ 0xbc441000,
+ 0xc8451000,
+ 0xb4220800,
+ 0x80240800,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xf800431b,
+ 0x78050003,
+ 0x38a58db0,
+ 0x58a20000,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780b0003,
+ 0x396b8db0,
+ 0x29610000,
+ 0x780241c6,
+ 0x38424e6d,
+ 0x3783000c,
+ 0xf8003931,
+ 0x2b810010,
+ 0x34213039,
+ 0x59610000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x202cffff,
+ 0x204bffff,
+ 0xb9800800,
+ 0x516c000c,
+ 0xfbffffe7,
+ 0x00220010,
+ 0x37830010,
+ 0xb56b0800,
+ 0x34210001,
+ 0x3c210010,
+ 0xf800391b,
+ 0x2b820010,
+ 0xc98b0800,
+ 0xb4220800,
+ 0x2021ffff,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x202400ff,
+ 0x7c850000,
+ 0x5ca00017,
+ 0x7801c050,
+ 0x382100ac,
+ 0x28210000,
+ 0x7802c050,
+ 0x384200a4,
+ 0x2021007f,
+ 0x33010124,
+ 0x28410000,
+ 0xb8801800,
+ 0x2021007f,
+ 0x7802c050,
+ 0x33010123,
+ 0x3842009c,
+ 0x28410000,
+ 0x7802c050,
+ 0x2021007f,
+ 0x33010122,
+ 0x384200e4,
+ 0x28410000,
+ 0x2021007f,
+ 0x33010120,
+ 0xe0000003,
+ 0x43010124,
+ 0x2023007f,
+ 0x7801c050,
+ 0x382100ac,
+ 0x7802c050,
+ 0x58230000,
+ 0x384200b0,
+ 0x28410000,
+ 0x20210001,
+ 0x4420fffe,
+ 0xb8801800,
+ 0x44a00003,
+ 0x43010123,
+ 0x2023007f,
+ 0x7801c050,
+ 0x382100a4,
+ 0x7802c050,
+ 0x58230000,
+ 0x384200a8,
+ 0x28410000,
+ 0x20210001,
+ 0x4420fffe,
+ 0xb8801800,
+ 0x44a00003,
+ 0x43010122,
+ 0x2023007f,
+ 0x7801c050,
+ 0x3821009c,
+ 0x7802c050,
+ 0x58230000,
+ 0x384200a0,
+ 0x28410000,
+ 0x20210001,
+ 0x4420fffe,
+ 0xb8801800,
+ 0x44a00003,
+ 0x43010120,
+ 0x2023007f,
+ 0x7801c050,
+ 0x382100e4,
+ 0x7802c050,
+ 0x58230000,
+ 0x384200e8,
+ 0x28410000,
+ 0x20210001,
+ 0x4420fffe,
+ 0xc3a00000,
+ 0x208400ff,
+ 0x5041000e,
+ 0x40a20001,
+ 0x34010000,
+ 0x30a10000,
+ 0x5c410007,
+ 0x40a20002,
+ 0x30a40001,
+ 0x74410006,
+ 0x5c20001b,
+ 0x34410001,
+ 0xe000000d,
+ 0x3441ffff,
+ 0x30a10001,
+ 0xc3a00000,
+ 0x40a20000,
+ 0x5023000d,
+ 0x34010000,
+ 0x30a10001,
+ 0x5c410007,
+ 0x40a10002,
+ 0x30a40000,
+ 0x4420000e,
+ 0x3421ffff,
+ 0x30a10002,
+ 0xc3a00000,
+ 0x3441ffff,
+ 0x30a10000,
+ 0xc3a00000,
+ 0x44400003,
+ 0x3441ffff,
+ 0x30a10000,
+ 0x40a10001,
+ 0x44200003,
+ 0x3421ffff,
+ 0x30a10001,
+ 0xc3a00000,
+ 0x208400ff,
+ 0x5041000e,
+ 0x40a20001,
+ 0x34010000,
+ 0x30a10000,
+ 0x5c410005,
+ 0x34010002,
+ 0x30a10003,
+ 0x30a40001,
+ 0xc3a00000,
+ 0x3442ffff,
+ 0x34010001,
+ 0x30a10003,
+ 0x30a20001,
+ 0xc3a00000,
+ 0x50230005,
+ 0x34010000,
+ 0x30a10003,
+ 0x30a10001,
+ 0xc3a00000,
+ 0x40a10000,
+ 0x44200003,
+ 0x3421ffff,
+ 0x30a10000,
+ 0x40a10001,
+ 0x44200003,
+ 0x3421ffff,
+ 0x30a10001,
+ 0x34010001,
+ 0x30a10003,
+ 0xc3a00000,
+ 0xb8201800,
+ 0xb8400800,
+ 0x50430002,
+ 0xb8600800,
+ 0xc3a00000,
+ 0xb8201800,
+ 0xb8400800,
+ 0x4c430002,
+ 0xb8600800,
+ 0xc3a00000,
+ 0x08220019,
+ 0x34011838,
+ 0xc8220800,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b9d0004,
+ 0x2f020240,
+ 0x34040010,
+ 0x34030000,
+ 0x2f010242,
+ 0x2042ffff,
+ 0x2021ffff,
+ 0x54410002,
+ 0x34030001,
+ 0xb4630800,
+ 0xb4380800,
+ 0x2c210240,
+ 0x2f0202b2,
+ 0x2021ffff,
+ 0x2f0302b0,
+ 0x2042ffff,
+ 0x2063ffff,
+ 0xfbffff1b,
+ 0x0f0102b2,
+ 0x430102b5,
+ 0x3804fd71,
+ 0x37850008,
+ 0x33810008,
+ 0x430102b6,
+ 0x33810009,
+ 0x2f0102b2,
+ 0x2f0202ee,
+ 0x2021ffff,
+ 0x2f0302ee,
+ 0x2042ffff,
+ 0x2063ffff,
+ 0x88641800,
+ 0x430402b7,
+ 0x14630010,
+ 0x208400ff,
+ 0xfbffffaf,
+ 0x43810008,
+ 0x330102b5,
+ 0x43810009,
+ 0x330102b6,
+ 0x4381000b,
+ 0x330106e4,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x78010003,
+ 0x34060000,
+ 0x3821f818,
+ 0x58260000,
+ 0x78070003,
+ 0x38e7fdd0,
+ 0x78010003,
+ 0x58e60000,
+ 0x3821fdd4,
+ 0x58260000,
+ 0x78020003,
+ 0x3842fdcc,
+ 0x78010003,
+ 0x58460000,
+ 0x3821fdc8,
+ 0x78050003,
+ 0x78030001,
+ 0x58260000,
+ 0x38630501,
+ 0x38a5f820,
+ 0x78040003,
+ 0x78020101,
+ 0x58a30000,
+ 0x38420101,
+ 0x3884f824,
+ 0x78010003,
+ 0x58820000,
+ 0x3821f82c,
+ 0x58220000,
+ 0x78010003,
+ 0x58e60000,
+ 0x3821f808,
+ 0x58260000,
+ 0x78020003,
+ 0x3842f99c,
+ 0x78010003,
+ 0x58460000,
+ 0x3821f9e8,
+ 0x78030003,
+ 0x58260000,
+ 0x3863f9ec,
+ 0x78020003,
+ 0x58660000,
+ 0x3842f9f0,
+ 0x78040003,
+ 0x58460000,
+ 0x38848b20,
+ 0x78010003,
+ 0x28830000,
+ 0x3821fa04,
+ 0x3402ffff,
+ 0x58220000,
+ 0x34010008,
+ 0x586100c0,
+ 0x340103ff,
+ 0x586100a4,
+ 0x3401fc00,
+ 0x586100a8,
+ 0x34010003,
+ 0x586100ac,
+ 0x3401000a,
+ 0x586100b0,
+ 0x34010400,
+ 0x586100b4,
+ 0x34010007,
+ 0x586100b8,
+ 0x340100ff,
+ 0x7804c020,
+ 0x586100bc,
+ 0x586600a0,
+ 0x38840088,
+ 0x28810000,
+ 0x3402ffc7,
+ 0x7803c020,
+ 0xa0220800,
+ 0x38210028,
+ 0x58810000,
+ 0x38630024,
+ 0x7802c050,
+ 0x58660000,
+ 0x384200dc,
+ 0x7801c050,
+ 0x58460000,
+ 0x38210100,
+ 0x58260000,
+ 0xc3a00000,
+ 0x2b0206c4,
+ 0x78040003,
+ 0x3884f004,
+ 0x2b0106e0,
+ 0xc8411000,
+ 0x5b0206c8,
+ 0x2b0206c8,
+ 0x3c410003,
+ 0xb4220800,
+ 0xb4220800,
+ 0x5b0106c8,
+ 0x2b0206c8,
+ 0x34010000,
+ 0x4c22000d,
+ 0x430106e4,
+ 0x5c20000f,
+ 0x430106e7,
+ 0x5c20000d,
+ 0x430106e6,
+ 0x5c20000b,
+ 0x430106e5,
+ 0x5c200009,
+ 0x430106fe,
+ 0x5c200007,
+ 0x430106fb,
+ 0x5c200005,
+ 0x2b0106cc,
+ 0x2b0206c8,
+ 0xb4220800,
+ 0x5b0106cc,
+ 0x2b0106cc,
+ 0x28820008,
+ 0x4c220002,
+ 0xe0000004,
+ 0x2b0106cc,
+ 0x28820004,
+ 0x4c410002,
+ 0x5b0206cc,
+ 0x28830000,
+ 0x2b0106cc,
+ 0x78028000,
+ 0x28840014,
+ 0x94230800,
+ 0x38420418,
+ 0xb4240800,
+ 0x5b0106d0,
+ 0x2b0106d0,
+ 0x58410000,
+ 0xc3a00000,
+ 0x78050003,
+ 0x38a5f000,
+ 0x40a4004c,
+ 0xb8603000,
+ 0x78070003,
+ 0x3484ffff,
+ 0x58640000,
+ 0x40a3004c,
+ 0xb8204000,
+ 0x38e7f054,
+ 0x34040000,
+ 0x4c83000b,
+ 0x34e30004,
+ 0x28610000,
+ 0x3463001c,
+ 0x55010003,
+ 0x58c40000,
+ 0xe0000005,
+ 0x40a1004c,
+ 0x34840001,
+ 0x4c810002,
+ 0xe3fffff8,
+ 0x28c30000,
+ 0x44600007,
+ 0x3c610003,
+ 0xc8230800,
+ 0x3c210002,
+ 0xb4270800,
+ 0x28210004,
+ 0x5d010003,
+ 0x58430000,
+ 0xc3a00000,
+ 0x3461ffff,
+ 0x58410000,
+ 0xc3a00000,
+ 0x430206e8,
+ 0x78010003,
+ 0x3821f000,
+ 0x4025004c,
+ 0xb0401000,
+ 0x78040003,
+ 0x3884f054,
+ 0x34430001,
+ 0x4c650010,
+ 0x3c610003,
+ 0xc8230800,
+ 0x3c210002,
+ 0xb4242000,
+ 0x40810011,
+ 0x44200006,
+ 0x28820004,
+ 0x2b0106f4,
+ 0x54220003,
+ 0xb8600800,
+ 0xc3a00000,
+ 0x34630001,
+ 0x3484001c,
+ 0x4c650002,
+ 0xe3fffff6,
+ 0x430106e8,
+ 0xb0200800,
+ 0xc3a00000,
+ 0x430106e8,
+ 0x78020003,
+ 0x3842f054,
+ 0xb0200800,
+ 0x3423ffff,
+ 0x34010000,
+ 0x48230011,
+ 0x3c610003,
+ 0xc8230800,
+ 0x3c210002,
+ 0xb4222000,
+ 0x2b0206f4,
+ 0x28810004,
+ 0x50220002,
+ 0xe0000009,
+ 0x40810011,
+ 0x3484ffe4,
+ 0x44200003,
+ 0xb8600800,
+ 0xc3a00000,
+ 0x3463ffff,
+ 0x48230002,
+ 0xe3fffff5,
+ 0x430106e8,
+ 0xb0200800,
+ 0xc3a00000,
+ 0x430106e8,
+ 0x78020003,
+ 0x3842f054,
+ 0xb0200800,
+ 0x48200005,
+ 0x34010000,
+ 0xc3a00000,
+ 0xb8600800,
+ 0xc3a00000,
+ 0x430106e8,
+ 0xb0200800,
+ 0x3423ffff,
+ 0x3c610003,
+ 0xc8230800,
+ 0x3c210002,
+ 0xb4220800,
+ 0x34220012,
+ 0x40410000,
+ 0x3442ffe4,
+ 0x5c20fff4,
+ 0x3463ffff,
+ 0xe3fffffc,
+ 0x202100ff,
+ 0x3c220003,
+ 0x78030003,
+ 0xc8411000,
+ 0x3c420002,
+ 0x3863f054,
+ 0xb4431000,
+ 0x28420010,
+ 0x780100ff,
+ 0x3821ff00,
+ 0xa0411000,
+ 0x34010001,
+ 0x5c400002,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x78010003,
+ 0x3821f000,
+ 0x4021004c,
+ 0x78040003,
+ 0x3884f054,
+ 0x34020000,
+ 0x5041000e,
+ 0xb8202800,
+ 0x3c410003,
+ 0x34430001,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb4240800,
+ 0x40210011,
+ 0x44200003,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x206200ff,
+ 0x50450002,
+ 0xe3fffff5,
+ 0x34010000,
+ 0xc3a00000,
+ 0x2b0206d0,
+ 0x78040003,
+ 0x3884f004,
+ 0x2883001c,
+ 0x2b0106d4,
+ 0x78058000,
+ 0xa0431000,
+ 0xb4220800,
+ 0x5b0106d4,
+ 0x2b0106d4,
+ 0x38a50418,
+ 0x34030000,
+ 0x58a10000,
+ 0x2b0106d4,
+ 0x2882001c,
+ 0x50410006,
+ 0x2b0106d4,
+ 0x34030001,
+ 0xc8220800,
+ 0x3421ffff,
+ 0x5b0106d4,
+ 0x2b0106d0,
+ 0x28820020,
+ 0x80220800,
+ 0xb4230800,
+ 0x5b0106d8,
+ 0x2b0106d8,
+ 0x58a10000,
+ 0x28820018,
+ 0x2b0106d8,
+ 0x50410002,
+ 0x5b0206d8,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x2f010728,
+ 0x78030002,
+ 0x34020000,
+ 0x38632ce4,
+ 0x4422000c,
+ 0x0f020728,
+ 0x2b020720,
+ 0x34010001,
+ 0x5c430008,
+ 0x2b020724,
+ 0xd8400000,
+ 0x2b020724,
+ 0x34010002,
+ 0xd8400000,
+ 0x2b010724,
+ 0x5b010720,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0x780c0003,
+ 0x202b00ff,
+ 0x398cf054,
+ 0x5d600046,
+ 0x78020003,
+ 0xb8406800,
+ 0x38428db6,
+ 0x2c410000,
+ 0x5c200036,
+ 0xfbffff67,
+ 0x430206e8,
+ 0xb0401000,
+ 0x5c220006,
+ 0x78010003,
+ 0x38218db4,
+ 0x34020007,
+ 0x30220000,
+ 0xe0000008,
+ 0xfbffff43,
+ 0x430206e8,
+ 0xb0401000,
+ 0x5c220004,
+ 0x78010003,
+ 0x38218db4,
+ 0x302b0000,
+ 0x78030003,
+ 0xb8600800,
+ 0x38218db4,
+ 0x40220000,
+ 0x7c410007,
+ 0x5c20000a,
+ 0x430106e8,
+ 0xb0200800,
+ 0x3c220003,
+ 0xc8411000,
+ 0x3c420002,
+ 0xb44c1000,
+ 0x40410013,
+ 0x330106eb,
+ 0xe000000a,
+ 0x5c400009,
+ 0x430106e8,
+ 0xb0200800,
+ 0x3c220003,
+ 0xc8411000,
+ 0x3c420002,
+ 0xb44c1000,
+ 0x40410014,
+ 0x330106ec,
+ 0x38638db4,
+ 0x40610000,
+ 0xb9a05800,
+ 0x396b8db6,
+ 0x5b0106d8,
+ 0x2f010728,
+ 0x2f02072a,
+ 0x2021ffff,
+ 0x2042ffff,
+ 0xfbfffd91,
+ 0x3421ffff,
+ 0x0d610000,
+ 0xe0000006,
+ 0x3421ffff,
+ 0x0c410000,
+ 0x430106e8,
+ 0xb0200800,
+ 0x5b0106d8,
+ 0x34010000,
+ 0x330106e6,
+ 0x330106e4,
+ 0x330106e5,
+ 0x330106fe,
+ 0xe0000007,
+ 0x7d610001,
+ 0x5c200005,
+ 0x78010003,
+ 0x38218db6,
+ 0x34020000,
+ 0x0c220000,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x2f020728,
+ 0x34010001,
+ 0x44400007,
+ 0x2b020720,
+ 0x5b020724,
+ 0xfbffff9f,
+ 0x78010002,
+ 0x38212ce4,
+ 0x5b010720,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x43010736,
+ 0x78030003,
+ 0x78050003,
+ 0x202400ff,
+ 0x78028000,
+ 0x5c80000d,
+ 0x78010003,
+ 0x38218dc0,
+ 0x38638db8,
+ 0x58240000,
+ 0x58640000,
+ 0x3842014c,
+ 0x28420000,
+ 0x38a58dbc,
+ 0x34010001,
+ 0x58a20000,
+ 0x33010736,
+ 0xe0000036,
+ 0xb8606800,
+ 0x39ad8db8,
+ 0xb8407000,
+ 0x29a30000,
+ 0x39ce014c,
+ 0xb8a07800,
+ 0x39ef8dbc,
+ 0x29c20000,
+ 0x29e10000,
+ 0x34630001,
+ 0x59a30000,
+ 0x5c410003,
+ 0x646107d0,
+ 0x44200028,
+ 0x44600027,
+ 0x78020003,
+ 0x3842e800,
+ 0x8c431000,
+ 0x780c0003,
+ 0xb9805800,
+ 0x396b8dc0,
+ 0x29610000,
+ 0x430306fc,
+ 0x206300ff,
+ 0xfbfffd0e,
+ 0x78050003,
+ 0xb8a03000,
+ 0xb8201800,
+ 0x38c6f000,
+ 0x2cc10052,
+ 0x29c20000,
+ 0x3c240008,
+ 0x59e20000,
+ 0x34010000,
+ 0x59a10000,
+ 0x59630000,
+ 0x50830003,
+ 0x34010002,
+ 0xe000000e,
+ 0x54640006,
+ 0x2cc102f6,
+ 0x3c210008,
+ 0x54230003,
+ 0x34010001,
+ 0xe0000008,
+ 0x38a5f000,
+ 0x2ca102f6,
+ 0x398c8dc0,
+ 0x29820000,
+ 0x3c210008,
+ 0x50410003,
+ 0x34010000,
+ 0x330106fe,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x202100ff,
+ 0x5c200003,
+ 0xfbfffe44,
+ 0xfbffff07,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x430106f8,
+ 0x7803c020,
+ 0x78040003,
+ 0x78020002,
+ 0x7805c020,
+ 0x38630008,
+ 0x38848b24,
+ 0x38423e94,
+ 0x38a50024,
+ 0x202100ff,
+ 0x5c20000a,
+ 0x330106f9,
+ 0x28610000,
+ 0x58820000,
+ 0x28620000,
+ 0x38420030,
+ 0x58620000,
+ 0x58610000,
+ 0x34010003,
+ 0x58a10000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x202100ff,
+ 0x7802c020,
+ 0x44200008,
+ 0xb8400800,
+ 0x38210304,
+ 0x28220000,
+ 0x3403fffd,
+ 0xa0431000,
+ 0x58220000,
+ 0xc3a00000,
+ 0x38420304,
+ 0x28410000,
+ 0xb8401800,
+ 0x38210002,
+ 0x58410000,
+ 0x28610000,
+ 0x20218000,
+ 0x4420fffe,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x430100a9,
+ 0x780b0003,
+ 0x396bf054,
+ 0x7c210001,
+ 0x5c200002,
+ 0xf8001438,
+ 0x43010085,
+ 0x7c210001,
+ 0x5c200002,
+ 0xf8001395,
+ 0x430106e9,
+ 0x7806c020,
+ 0x38c60014,
+ 0x330106e8,
+ 0x430106e9,
+ 0x7804ffe0,
+ 0x7805001f,
+ 0xb0200800,
+ 0xb4210800,
+ 0xb4380800,
+ 0x34210708,
+ 0x2c220008,
+ 0x3884ffff,
+ 0x38a50000,
+ 0x34420001,
+ 0x0c220008,
+ 0x430206e9,
+ 0x7803c020,
+ 0x38630130,
+ 0xb0401000,
+ 0x3c410003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb42b0800,
+ 0x2c21000a,
+ 0x5b0106e0,
+ 0x28c20000,
+ 0x430106e9,
+ 0xa0441000,
+ 0xb0200800,
+ 0x3c210010,
+ 0xa0250800,
+ 0xb8411000,
+ 0x58c20000,
+ 0x28610000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0x58610000,
+ 0x430106ea,
+ 0x202200ff,
+ 0x5c400030,
+ 0x430106ee,
+ 0x5c200013,
+ 0x33020760,
+ 0x78010003,
+ 0x330206ef,
+ 0x38218ba8,
+ 0x7805c020,
+ 0x30220019,
+ 0x30220000,
+ 0x38a50004,
+ 0x28a40000,
+ 0x78030003,
+ 0x78020002,
+ 0x3401ffef,
+ 0xa0812000,
+ 0x38638b24,
+ 0x38424a68,
+ 0x58620000,
+ 0x58a40000,
+ 0xe0000023,
+ 0x430106f0,
+ 0x78060003,
+ 0x44200007,
+ 0x78010002,
+ 0x38c68b24,
+ 0x38213dc8,
+ 0x58c10000,
+ 0x330206ef,
+ 0xe000001a,
+ 0x34010001,
+ 0x7802c020,
+ 0x330106ef,
+ 0x38420008,
+ 0x28450000,
+ 0x78030002,
+ 0x7804c020,
+ 0x28410000,
+ 0x38c68b24,
+ 0x38633e94,
+ 0x38210030,
+ 0x58410000,
+ 0x58450000,
+ 0x38840024,
+ 0x34010003,
+ 0x58c30000,
+ 0x58810000,
+ 0xe0000008,
+ 0x34030000,
+ 0x78020003,
+ 0x78010002,
+ 0x330306ea,
+ 0x38428b24,
+ 0x38213e94,
+ 0x58410000,
+ 0x34010000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x7805c020,
+ 0x38a50304,
+ 0xb8203000,
+ 0x28a10000,
+ 0x3cc30001,
+ 0x3404fffd,
+ 0xa0240800,
+ 0x20630002,
+ 0xb8230800,
+ 0x58a10000,
+ 0x204200ff,
+ 0x44400006,
+ 0xb8a01000,
+ 0x28410000,
+ 0x20218000,
+ 0x0021000f,
+ 0x5c26fffd,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x430100a9,
+ 0x780c0003,
+ 0x398cf054,
+ 0x7c210001,
+ 0x5c200002,
+ 0xf80013b4,
+ 0x43010085,
+ 0x7c210001,
+ 0x5c200002,
+ 0xf8001311,
+ 0x430106f2,
+ 0x202300ff,
+ 0x5c60000e,
+ 0x430106e9,
+ 0xb0200800,
+ 0x3c220003,
+ 0xc8411000,
+ 0x3c420002,
+ 0xb44c1000,
+ 0x404b0010,
+ 0x7d610001,
+ 0x5c200005,
+ 0xb8600800,
+ 0xb8601000,
+ 0xfbffffd2,
+ 0x330b06f2,
+ 0x430106e9,
+ 0x7806c020,
+ 0x38c60014,
+ 0x330106e8,
+ 0x430106e9,
+ 0x7804ffe0,
+ 0x7805001f,
+ 0xb0200800,
+ 0xb4210800,
+ 0xb4380800,
+ 0x34210708,
+ 0x2c220008,
+ 0x3884ffff,
+ 0x38a50000,
+ 0x34420001,
+ 0x0c220008,
+ 0x430206e9,
+ 0x7803c020,
+ 0x38630130,
+ 0xb0401000,
+ 0x3c410003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb42c0800,
+ 0x2c21000a,
+ 0x5b0106e0,
+ 0x28c20000,
+ 0x430106e9,
+ 0xa0441000,
+ 0xb0200800,
+ 0x3c210010,
+ 0xa0250800,
+ 0xb8411000,
+ 0x58c20000,
+ 0x28610000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0x58610000,
+ 0x430106ea,
+ 0x202200ff,
+ 0x5c400030,
+ 0x430106ee,
+ 0x5c200013,
+ 0x33020760,
+ 0x78010003,
+ 0x330206ef,
+ 0x38218ba8,
+ 0x7805c020,
+ 0x30220019,
+ 0x30220000,
+ 0x38a50004,
+ 0x28a40000,
+ 0x78030003,
+ 0x78020002,
+ 0x3401ffef,
+ 0xa0812000,
+ 0x38638b24,
+ 0x38424a68,
+ 0x58620000,
+ 0x58a40000,
+ 0xe0000023,
+ 0x430106f0,
+ 0x78060003,
+ 0x44200007,
+ 0x78010002,
+ 0x38c68b24,
+ 0x38213dc8,
+ 0x58c10000,
+ 0x330206ef,
+ 0xe000001a,
+ 0x34010001,
+ 0x7802c020,
+ 0x330106ef,
+ 0x38420008,
+ 0x28450000,
+ 0x78030002,
+ 0x7804c020,
+ 0x28410000,
+ 0x38c68b24,
+ 0x38633e94,
+ 0x38210030,
+ 0x58410000,
+ 0x58450000,
+ 0x38840024,
+ 0x34010003,
+ 0x58c30000,
+ 0x58810000,
+ 0xe0000008,
+ 0x34030000,
+ 0x78020003,
+ 0x78010002,
+ 0x330306ea,
+ 0x38428b24,
+ 0x38213e94,
+ 0x58410000,
+ 0x34010000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x430206e9,
+ 0x78030003,
+ 0x3863f054,
+ 0xb0401000,
+ 0x3c410003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb4236000,
+ 0x4181000d,
+ 0x3301077f,
+ 0x4181000e,
+ 0x33010781,
+ 0x41810017,
+ 0x20260008,
+ 0x44c00011,
+ 0x7803c050,
+ 0x386301c8,
+ 0x28610000,
+ 0x3402ffc7,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x38840118,
+ 0x28810000,
+ 0x7802c050,
+ 0x384200cc,
+ 0x38210800,
+ 0x58810000,
+ 0x34010000,
+ 0x58410000,
+ 0xe0000015,
+ 0x20220002,
+ 0x780bc050,
+ 0x44400015,
+ 0x7805c050,
+ 0x38a501c8,
+ 0x28a30000,
+ 0x20210007,
+ 0x3c210003,
+ 0x3402ffc7,
+ 0xa0621800,
+ 0xb8611800,
+ 0x7804c050,
+ 0x58a30000,
+ 0x38840118,
+ 0x28810000,
+ 0x3402f7ff,
+ 0x396b00cc,
+ 0xa0220800,
+ 0x58810000,
+ 0x59660000,
+ 0x34010001,
+ 0x33010918,
+ 0xe0000016,
+ 0x33020918,
+ 0xf8002453,
+ 0x4181000f,
+ 0x396b00cc,
+ 0x7802c050,
+ 0x59610000,
+ 0x384200d0,
+ 0x28410000,
+ 0x4420ffff,
+ 0x7803c050,
+ 0x38630118,
+ 0x28610000,
+ 0x3402f7ff,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x388401c8,
+ 0x28810000,
+ 0x3402ffc7,
+ 0xa0220800,
+ 0x58810000,
+ 0x29820004,
+ 0x78010003,
+ 0x38218b88,
+ 0x58220000,
+ 0x41820016,
+ 0x7806c020,
+ 0x78057fff,
+ 0x44400014,
+ 0x7804c020,
+ 0x38840088,
+ 0x28810000,
+ 0x3c420003,
+ 0x3403ffc7,
+ 0xa0230800,
+ 0x20420038,
+ 0xb8220800,
+ 0xb8c01800,
+ 0x58810000,
+ 0x38630080,
+ 0x28620000,
+ 0x38a5ffff,
+ 0x78018000,
+ 0xa0451000,
+ 0x38210000,
+ 0xb8411000,
+ 0x58620000,
+ 0xe0000007,
+ 0xb8c01000,
+ 0x38420080,
+ 0x28410000,
+ 0x38a5ffff,
+ 0xa0250800,
+ 0x58410000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x780b0003,
+ 0x396b8b88,
+ 0x29610000,
+ 0xf80011d1,
+ 0xb8206000,
+ 0x29610000,
+ 0xf800126a,
+ 0xb8206800,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x430106fa,
+ 0x44200004,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe0000029,
+ 0xb98d0800,
+ 0x5c20000a,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x382132b0,
+ 0x58410000,
+ 0xfbffff6d,
+ 0xd00b0000,
+ 0xfbfffee8,
+ 0xe000001d,
+ 0xd00b0000,
+ 0x658e0000,
+ 0x340f0000,
+ 0x5dcf0003,
+ 0xf80011e9,
+ 0x442f0002,
+ 0x340f0001,
+ 0x65ac0000,
+ 0x340b0000,
+ 0x5d8b0003,
+ 0xf8001282,
+ 0x442b0002,
+ 0x340b0001,
+ 0x65e10000,
+ 0x65620000,
+ 0x34030000,
+ 0xb8220800,
+ 0xe4230800,
+ 0x4423000b,
+ 0x5dc30002,
+ 0xf80011e6,
+ 0x5d800002,
+ 0xf8001283,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x382137b0,
+ 0x58410000,
+ 0x34030001,
+ 0xb8600800,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0xf80011f2,
+ 0xb8206000,
+ 0xf800128f,
+ 0xb8203000,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x430106fa,
+ 0x202100ff,
+ 0xb8202800,
+ 0xb8202000,
+ 0x44200003,
+ 0xd00b0000,
+ 0xe000000c,
+ 0x78030003,
+ 0x78020002,
+ 0x38638b24,
+ 0x384232b0,
+ 0x4d800002,
+ 0x34040001,
+ 0x4cc00002,
+ 0x34050001,
+ 0xb8850800,
+ 0x44200004,
+ 0xd00b0000,
+ 0x34010001,
+ 0xe0000005,
+ 0x58620000,
+ 0xfbffff23,
+ 0xd00b0000,
+ 0xfbfffe9e,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x430206e9,
+ 0x78030003,
+ 0x3863f054,
+ 0xb0401000,
+ 0x3c410003,
+ 0x430406f2,
+ 0xc8220800,
+ 0x3c210002,
+ 0x208400ff,
+ 0x7c820001,
+ 0xb4236000,
+ 0x5c400007,
+ 0x418b0010,
+ 0x5d600005,
+ 0xb8800800,
+ 0xb8801000,
+ 0xfbfffe72,
+ 0x330b06f2,
+ 0x41820016,
+ 0x7807c020,
+ 0x78057fff,
+ 0x78060003,
+ 0x44400014,
+ 0x7804c020,
+ 0x38840088,
+ 0x28810000,
+ 0x3c420003,
+ 0x3403ffc7,
+ 0xa0230800,
+ 0x20420038,
+ 0xb8220800,
+ 0xb8e01800,
+ 0x58810000,
+ 0x38630080,
+ 0x28620000,
+ 0x38a5ffff,
+ 0x78018000,
+ 0xa0451000,
+ 0x38210000,
+ 0xb8411000,
+ 0x58620000,
+ 0xe0000007,
+ 0xb8e01000,
+ 0x38420080,
+ 0x28410000,
+ 0x38a5ffff,
+ 0xa0250800,
+ 0x58410000,
+ 0x4181000d,
+ 0x38c68b88,
+ 0x3301077f,
+ 0x4181000e,
+ 0x33010781,
+ 0x41810017,
+ 0x29820004,
+ 0x58c20000,
+ 0x20260008,
+ 0x44c00011,
+ 0x7803c050,
+ 0x386301c8,
+ 0x28610000,
+ 0x3402ffc7,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x38840118,
+ 0x28810000,
+ 0x7802c050,
+ 0x384200cc,
+ 0x38210800,
+ 0x58810000,
+ 0x34010000,
+ 0x58410000,
+ 0xe0000015,
+ 0x20220002,
+ 0x780bc050,
+ 0x44400015,
+ 0x7805c050,
+ 0x38a501c8,
+ 0x28a30000,
+ 0x20210007,
+ 0x3c210003,
+ 0x3402ffc7,
+ 0xa0621800,
+ 0xb8611800,
+ 0x7804c050,
+ 0x58a30000,
+ 0x38840118,
+ 0x28810000,
+ 0x3402f7ff,
+ 0x396b00cc,
+ 0xa0220800,
+ 0x58810000,
+ 0x59660000,
+ 0x34010001,
+ 0x33010918,
+ 0xe0000016,
+ 0x33020918,
+ 0xf8002343,
+ 0x4181000f,
+ 0x396b00cc,
+ 0x7802c050,
+ 0x59610000,
+ 0x384200d0,
+ 0x28410000,
+ 0x4420ffff,
+ 0x7803c050,
+ 0x38630118,
+ 0x28610000,
+ 0x3402f7ff,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x388401c8,
+ 0x28810000,
+ 0x3402ffc7,
+ 0xa0220800,
+ 0x58810000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x430206e9,
+ 0x78030003,
+ 0x3863f054,
+ 0xb0401000,
+ 0x3c410003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb4230800,
+ 0x282b0004,
+ 0xb9600800,
+ 0xf80010db,
+ 0xb8206000,
+ 0xb9600800,
+ 0xf8001174,
+ 0xb8206800,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x430106fa,
+ 0x44200004,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe0000029,
+ 0xb98d0800,
+ 0x5c20000a,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x382130a4,
+ 0x58410000,
+ 0xfbffff5c,
+ 0xd00b0000,
+ 0xfbfffd6f,
+ 0xe000001d,
+ 0xd00b0000,
+ 0x658e0000,
+ 0x340f0000,
+ 0x5dcf0003,
+ 0xf80010f3,
+ 0x442f0002,
+ 0x340f0001,
+ 0x65ac0000,
+ 0x340b0000,
+ 0x5d8b0003,
+ 0xf800118c,
+ 0x442b0002,
+ 0x340b0001,
+ 0x65e10000,
+ 0x65620000,
+ 0x34030000,
+ 0xb8220800,
+ 0xe4230800,
+ 0x4423000b,
+ 0x5dc30002,
+ 0xf80010f0,
+ 0x5d800002,
+ 0xf800118d,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x382143c8,
+ 0x58410000,
+ 0x34030001,
+ 0xb8600800,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b0014,
+ 0x5b8c0010,
+ 0x5b8d000c,
+ 0x5b8e0008,
+ 0x5b9d0004,
+ 0x430106ea,
+ 0x780e0003,
+ 0x39cef054,
+ 0x5c200047,
+ 0x780d0003,
+ 0x78010002,
+ 0x38213b88,
+ 0x39ad8b24,
+ 0x59a10000,
+ 0x430106f0,
+ 0x44200004,
+ 0x430106f1,
+ 0x330106e9,
+ 0xe000003b,
+ 0x780c0003,
+ 0x398cf000,
+ 0x418b02f0,
+ 0x216100ff,
+ 0xfbfffbe4,
+ 0x4420000a,
+ 0x330b06e9,
+ 0x418102f3,
+ 0x7802c020,
+ 0x38420004,
+ 0x33010760,
+ 0x28410000,
+ 0x38210010,
+ 0x58410000,
+ 0xe000002c,
+ 0x430106ee,
+ 0x7804c020,
+ 0x202200ff,
+ 0x5c400010,
+ 0x330206ef,
+ 0x78010003,
+ 0x33020760,
+ 0x38218ba8,
+ 0x30220019,
+ 0x30220000,
+ 0x38840004,
+ 0x28830000,
+ 0x78010002,
+ 0x3402ffef,
+ 0xa0621800,
+ 0x38214a68,
+ 0x59a10000,
+ 0x58830000,
+ 0xe0000017,
+ 0x34010001,
+ 0x330106ef,
+ 0x418302f3,
+ 0x78010002,
+ 0x38213e94,
+ 0x59a10000,
+ 0x7802c020,
+ 0x33030760,
+ 0x38420008,
+ 0x28450000,
+ 0x7803c020,
+ 0x38630024,
+ 0x28410000,
+ 0x38840004,
+ 0x38210030,
+ 0x58410000,
+ 0x58450000,
+ 0x34010003,
+ 0x58610000,
+ 0x28810000,
+ 0x38210010,
+ 0x58810000,
+ 0x34010000,
+ 0xe000003c,
+ 0x34010001,
+ 0x330106ea,
+ 0x430306e9,
+ 0x34020000,
+ 0xb0601800,
+ 0x3c610003,
+ 0xc8230800,
+ 0x3c210002,
+ 0xb42e0800,
+ 0x28210000,
+ 0xf8001b18,
+ 0x34060000,
+ 0x330606ed,
+ 0x2f02073c,
+ 0x2f010748,
+ 0x5422002b,
+ 0x330606eb,
+ 0x330606ec,
+ 0x7802c020,
+ 0x330606ed,
+ 0x38420130,
+ 0x28410000,
+ 0x7805c020,
+ 0x38a50014,
+ 0x38210002,
+ 0x58410000,
+ 0x28a40000,
+ 0x7802fc1f,
+ 0x780303e0,
+ 0x430106e9,
+ 0x3842ffff,
+ 0x38630000,
+ 0xb0200800,
+ 0x3c210015,
+ 0xa0822000,
+ 0xa0230800,
+ 0xb8812000,
+ 0x58a40000,
+ 0x330606ea,
+ 0x430206e9,
+ 0xb0401000,
+ 0x3c410003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb42e0800,
+ 0x40210010,
+ 0x330106f2,
+ 0x430106f2,
+ 0x202100ff,
+ 0xfbfffcb5,
+ 0x430206e9,
+ 0x430106e8,
+ 0xb0401000,
+ 0xb0200800,
+ 0x48410003,
+ 0xfbffff2c,
+ 0xe0000002,
+ 0xfbfffe3b,
+ 0x34010001,
+ 0x2b8b0014,
+ 0x2b8c0010,
+ 0x2b8d000c,
+ 0x2b8e0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x430106f8,
+ 0x34050000,
+ 0x78040003,
+ 0x202300ff,
+ 0x78020002,
+ 0x7c610001,
+ 0x38848b24,
+ 0x38423000,
+ 0xb8a04000,
+ 0x5c250005,
+ 0x330306f9,
+ 0x330506f0,
+ 0x58820000,
+ 0xe0000020,
+ 0x430106f0,
+ 0x7803c020,
+ 0x78050003,
+ 0x78040002,
+ 0x7806c020,
+ 0x34070001,
+ 0x38630008,
+ 0x38a58b24,
+ 0x38843e94,
+ 0x38c60024,
+ 0x202200ff,
+ 0x34080000,
+ 0x44480009,
+ 0x430206f1,
+ 0x430106e8,
+ 0x204200ff,
+ 0xb0200800,
+ 0x4441000e,
+ 0xfbffff4e,
+ 0xb8204000,
+ 0xe000000b,
+ 0x330706ef,
+ 0x28610000,
+ 0xb8404000,
+ 0x58a40000,
+ 0x28620000,
+ 0x38420030,
+ 0x58620000,
+ 0x58610000,
+ 0x34010003,
+ 0x58c10000,
+ 0xb9000800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x430106ff,
+ 0x780c0003,
+ 0x398cf054,
+ 0x44200002,
+ 0xfbfffbf4,
+ 0x430106f8,
+ 0x202400ff,
+ 0x7c810001,
+ 0x5c20000a,
+ 0x430306e8,
+ 0x78020003,
+ 0x78010002,
+ 0x330306e9,
+ 0x330406f9,
+ 0x38428b24,
+ 0x38213000,
+ 0x58410000,
+ 0xe0000007,
+ 0x430106ee,
+ 0x44200004,
+ 0x430106f0,
+ 0x64210001,
+ 0x44200004,
+ 0xfbffff22,
+ 0x34010000,
+ 0xe000012b,
+ 0x78010003,
+ 0x38218b88,
+ 0x28220000,
+ 0x2b0106f4,
+ 0x5041000c,
+ 0x430206e8,
+ 0xb0401000,
+ 0x3c410003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb42c0800,
+ 0x40210013,
+ 0x330106eb,
+ 0x34010007,
+ 0x5b0106d8,
+ 0xe0000032,
+ 0x430106fd,
+ 0x7c210001,
+ 0x5c20002c,
+ 0x34030000,
+ 0x330306fd,
+ 0x430206e8,
+ 0xb0401000,
+ 0x3c410003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb42c0800,
+ 0x402b0011,
+ 0x5d630025,
+ 0x330306e6,
+ 0x330306e4,
+ 0x330306e5,
+ 0x330306fe,
+ 0xfbfffaaf,
+ 0x430206e8,
+ 0xb0401000,
+ 0x4422000c,
+ 0x34010007,
+ 0x5b0106d8,
+ 0x430206e8,
+ 0xb0401000,
+ 0x3c410003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb42c0800,
+ 0x40210013,
+ 0x330106eb,
+ 0xe0000012,
+ 0xfbfffabb,
+ 0x430206e8,
+ 0xb0401000,
+ 0x4422000e,
+ 0x5b0b06d8,
+ 0x430106e8,
+ 0xb0200800,
+ 0x3c220003,
+ 0xc8411000,
+ 0x3c420002,
+ 0xb44c1000,
+ 0x40410014,
+ 0x330106ec,
+ 0xe0000004,
+ 0x2b020720,
+ 0x34010000,
+ 0xd8400000,
+ 0x430106ea,
+ 0x5c2000e6,
+ 0x430106e8,
+ 0x2b0206d8,
+ 0xb0200800,
+ 0x48220010,
+ 0x430106e6,
+ 0x64210002,
+ 0x5c20000d,
+ 0x430106e4,
+ 0x64210002,
+ 0x5c20000a,
+ 0x430106e5,
+ 0x64210002,
+ 0x5c200007,
+ 0x430106fe,
+ 0x64210002,
+ 0x5c200004,
+ 0x430106fb,
+ 0x202b00ff,
+ 0x45600065,
+ 0x430106e6,
+ 0x64210002,
+ 0x5c20000c,
+ 0x430106e4,
+ 0x64210002,
+ 0x5c200009,
+ 0x430106e5,
+ 0x64210002,
+ 0x5c200006,
+ 0x430106fe,
+ 0x64210002,
+ 0x5c200003,
+ 0x430106fb,
+ 0x44200028,
+ 0x430106e6,
+ 0x7c210002,
+ 0x5c200003,
+ 0x34010001,
+ 0x330106e6,
+ 0x430106e4,
+ 0x7c210002,
+ 0x5c200003,
+ 0x34010001,
+ 0x330106e4,
+ 0x430106e5,
+ 0x7c210002,
+ 0x5c200003,
+ 0x34010001,
+ 0x330106e5,
+ 0x430106fe,
+ 0x7c210002,
+ 0x5c200003,
+ 0x34010001,
+ 0x330106fe,
+ 0x430206e8,
+ 0xb0401000,
+ 0x3c410003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb42c0800,
+ 0x40210014,
+ 0x34210001,
+ 0x330106ec,
+ 0x430106fb,
+ 0x44200003,
+ 0xfbfffaa7,
+ 0xe0000002,
+ 0xfbfffa80,
+ 0x330106e9,
+ 0x430106e8,
+ 0xb0200800,
+ 0x5b0106d8,
+ 0xe0000006,
+ 0x430106ec,
+ 0x34210001,
+ 0x330106ec,
+ 0xfbfffa5d,
+ 0x330106e9,
+ 0x430206e8,
+ 0xb0401000,
+ 0x3c410003,
+ 0x430306ec,
+ 0xc8220800,
+ 0x3c210002,
+ 0x206300ff,
+ 0xb42c0800,
+ 0x40210014,
+ 0x50230074,
+ 0x340b0000,
+ 0x330b06ec,
+ 0x430206e8,
+ 0x430106e9,
+ 0xb0401000,
+ 0xb0200800,
+ 0x4441006d,
+ 0x34010001,
+ 0x7802c020,
+ 0x330106ea,
+ 0x38420130,
+ 0x28410000,
+ 0x7805c020,
+ 0x38a50014,
+ 0x38210002,
+ 0x58410000,
+ 0x28a40000,
+ 0x7802fc1f,
+ 0x780303e0,
+ 0x430106e9,
+ 0x3842ffff,
+ 0x38630000,
+ 0xb0200800,
+ 0x3c210015,
+ 0xa0822000,
+ 0xa0230800,
+ 0xb8812000,
+ 0x58a40000,
+ 0xfbfffe1a,
+ 0x5c2b0056,
+ 0x330b06ea,
+ 0xe0000054,
+ 0x430106e6,
+ 0x64210001,
+ 0x5c20004f,
+ 0x430106e4,
+ 0x64210001,
+ 0x5c20004c,
+ 0x430106e5,
+ 0x64210001,
+ 0x5c200049,
+ 0x430106fe,
+ 0x64210001,
+ 0x5c200046,
+ 0x430106e8,
+ 0x2b0206d8,
+ 0xb0200800,
+ 0x4c220042,
+ 0x430106eb,
+ 0x34210001,
+ 0x330106eb,
+ 0xfbfffa03,
+ 0x330106e9,
+ 0x330b06ed,
+ 0x430206e8,
+ 0xb0401000,
+ 0x3c410003,
+ 0x430306eb,
+ 0xc8220800,
+ 0x3c210002,
+ 0x206300ff,
+ 0xb42c0800,
+ 0x40210013,
+ 0x50230034,
+ 0x430206e8,
+ 0x430106e9,
+ 0xb0401000,
+ 0xb0200800,
+ 0x44410029,
+ 0x430306e9,
+ 0xb9601000,
+ 0xb0601800,
+ 0x3c610003,
+ 0xc8230800,
+ 0x3c210002,
+ 0xb42c0800,
+ 0x28210000,
+ 0xf80019a8,
+ 0x2f02073c,
+ 0x2f010748,
+ 0x5422001d,
+ 0x34010001,
+ 0x330106ea,
+ 0x330b06eb,
+ 0x330b06ec,
+ 0x7802c020,
+ 0x330b06ed,
+ 0x38420130,
+ 0x28410000,
+ 0x7805c020,
+ 0x38a50014,
+ 0x38210002,
+ 0x58410000,
+ 0x28a40000,
+ 0x7802fc1f,
+ 0x780303e0,
+ 0x430106e9,
+ 0x3842ffff,
+ 0x38630000,
+ 0xb0200800,
+ 0x3c210015,
+ 0xa0822000,
+ 0xa0230800,
+ 0xb8812000,
+ 0x58a40000,
+ 0xfbfffcde,
+ 0x5c200009,
+ 0x330106ea,
+ 0xe0000007,
+ 0x430106eb,
+ 0x3421ffff,
+ 0x330106eb,
+ 0xe0000003,
+ 0x430106e8,
+ 0x330106e9,
+ 0x430106e8,
+ 0x2b0206d8,
+ 0xb0200800,
+ 0x48410018,
+ 0x430106ed,
+ 0x34210001,
+ 0x330106ed,
+ 0x430206e8,
+ 0xb0401000,
+ 0x3c410003,
+ 0x430306ed,
+ 0xc8220800,
+ 0x3c210002,
+ 0x206300ff,
+ 0xb42c0800,
+ 0x40210015,
+ 0x5023000b,
+ 0x34010000,
+ 0x330106ed,
+ 0x430206e8,
+ 0xb0401000,
+ 0x3c410003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb42c0800,
+ 0x28210000,
+ 0x0f010748,
+ 0x430106ea,
+ 0x202100ff,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0xf8000eec,
+ 0xb8206000,
+ 0xf8000f89,
+ 0xb8203000,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x430106fa,
+ 0x202100ff,
+ 0xb8202800,
+ 0xb8202000,
+ 0x44200003,
+ 0xd00b0000,
+ 0xe000000c,
+ 0x78030003,
+ 0x78020002,
+ 0x38638b24,
+ 0x384230a4,
+ 0x4d800002,
+ 0x34040001,
+ 0x4cc00002,
+ 0x34050001,
+ 0xb8850800,
+ 0x44200004,
+ 0xd00b0000,
+ 0x34010001,
+ 0xe0000005,
+ 0x58620000,
+ 0xfbfffd02,
+ 0xd00b0000,
+ 0xfbfffb15,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x430106ef,
+ 0x7c210001,
+ 0x5c200009,
+ 0x430106e8,
+ 0xb0200800,
+ 0xb4210800,
+ 0xb4380800,
+ 0x342106f8,
+ 0x2c220008,
+ 0x34420001,
+ 0x0c220008,
+ 0xc3a00000,
+ 0x7804c020,
+ 0x38840130,
+ 0x28820000,
+ 0x202100ff,
+ 0x3c210005,
+ 0x3403fc1f,
+ 0xa0431000,
+ 0xb8411000,
+ 0x58820000,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x7805c020,
+ 0x38a50024,
+ 0x28a80000,
+ 0x7804c020,
+ 0x780b0003,
+ 0x34070000,
+ 0x7802c020,
+ 0x65010003,
+ 0x38840008,
+ 0x396bf900,
+ 0x3842002c,
+ 0x340300e0,
+ 0xb8e03000,
+ 0x44270015,
+ 0x58a70000,
+ 0x28420000,
+ 0x7801c020,
+ 0x38210028,
+ 0x44470004,
+ 0x28210000,
+ 0x08210064,
+ 0x8c223000,
+ 0x5b0606c4,
+ 0x28810000,
+ 0x28820000,
+ 0x38420030,
+ 0x58820000,
+ 0x58810000,
+ 0x58a80000,
+ 0x2b0206c4,
+ 0x29610018,
+ 0x3c420008,
+ 0xfbfff78d,
+ 0x59610018,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x3821f900,
+ 0x28210008,
+ 0x20220001,
+ 0x64410000,
+ 0x5c20001c,
+ 0x430106ef,
+ 0x5c20001b,
+ 0x430106f0,
+ 0x340b0001,
+ 0x5c200018,
+ 0x330b06ee,
+ 0xfbfffd7a,
+ 0x78010003,
+ 0x3821f000,
+ 0x402502f1,
+ 0x78030003,
+ 0x78040002,
+ 0x78010003,
+ 0x78020003,
+ 0x38218ba8,
+ 0x38638b24,
+ 0x3884e6e0,
+ 0x38422680,
+ 0x58620058,
+ 0x302b0016,
+ 0x30250000,
+ 0x5864002c,
+ 0x30250019,
+ 0x302b0024,
+ 0x302b000b,
+ 0x302b002f,
+ 0xe0000002,
+ 0x330206ee,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x430106ef,
+ 0x78070003,
+ 0x38e7f054,
+ 0x34060000,
+ 0x5c26004b,
+ 0x430106f0,
+ 0x5c260049,
+ 0x78020003,
+ 0x3842f000,
+ 0x4041004c,
+ 0xb8c02000,
+ 0x50c10020,
+ 0xb8405800,
+ 0x340a0001,
+ 0x3c830003,
+ 0x34890001,
+ 0xc8641000,
+ 0x3c420002,
+ 0x34050001,
+ 0xb4471000,
+ 0x40410011,
+ 0xb8404000,
+ 0xb8401800,
+ 0x44200007,
+ 0x2b010730,
+ 0xbd441000,
+ 0x80240800,
+ 0xa0250800,
+ 0x5c200002,
+ 0xb8c23000,
+ 0x2b010730,
+ 0x80240800,
+ 0x20210001,
+ 0x64210000,
+ 0x5c200002,
+ 0x30650011,
+ 0x41010011,
+ 0x44200002,
+ 0x33040734,
+ 0x4161004c,
+ 0x212400ff,
+ 0x50810002,
+ 0xe3ffffe4,
+ 0x5b06072c,
+ 0x2b020730,
+ 0x78010003,
+ 0x3821f900,
+ 0x2b03072c,
+ 0x340b0001,
+ 0xb8431000,
+ 0x30220024,
+ 0x330b06ee,
+ 0xfbfffd29,
+ 0x78010003,
+ 0x3821f000,
+ 0x402202f1,
+ 0x78050003,
+ 0x38a5f818,
+ 0x78010003,
+ 0x38218ba8,
+ 0x30220000,
+ 0x30220019,
+ 0x302b0016,
+ 0x302b0024,
+ 0x302b000b,
+ 0x302b002f,
+ 0x28a10000,
+ 0x78030003,
+ 0x78040002,
+ 0xb82b0800,
+ 0x58a10000,
+ 0x78020003,
+ 0x38638b24,
+ 0x3884e6e0,
+ 0x38422680,
+ 0x34010000,
+ 0x58620058,
+ 0x5864002c,
+ 0x5b010738,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x34010000,
+ 0x78030003,
+ 0x330106ee,
+ 0x3863f818,
+ 0x28610000,
+ 0x3402fffe,
+ 0xa0220800,
+ 0x58610000,
+ 0xc3a00000,
+ 0x2b2502c0,
+ 0x78040fff,
+ 0x7806f000,
+ 0x3884ffff,
+ 0x206300ff,
+ 0x38c60000,
+ 0x202700ff,
+ 0xa0442000,
+ 0x20a50100,
+ 0xb8604000,
+ 0x44a00002,
+ 0x44600013,
+ 0x44600005,
+ 0x2b2102c0,
+ 0x3402feff,
+ 0xa0220800,
+ 0x5b2102c0,
+ 0x2b2102c0,
+ 0x3402ff00,
+ 0x34080001,
+ 0xa0220800,
+ 0xb8270800,
+ 0x5b2102c0,
+ 0x2b2102c4,
+ 0xa0260800,
+ 0xb8240800,
+ 0x5b2102c4,
+ 0x2b2102c0,
+ 0x38210100,
+ 0x5b2102c0,
+ 0xb9000800,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x4304092c,
+ 0x34020000,
+ 0x3401005d,
+ 0x7c840001,
+ 0xb8401800,
+ 0x5c820006,
+ 0xfbffffd8,
+ 0x34020000,
+ 0x44220003,
+ 0x3302092b,
+ 0x3302092c,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x430106ef,
+ 0x78030003,
+ 0x3863f054,
+ 0x4420002f,
+ 0x780b0003,
+ 0xb9600800,
+ 0x3821f000,
+ 0x282102fc,
+ 0x4420002a,
+ 0x430106e6,
+ 0x5c20000a,
+ 0x430106e4,
+ 0x5c200008,
+ 0x430106e5,
+ 0x5c200006,
+ 0x430106fe,
+ 0x5c200004,
+ 0x43020734,
+ 0x204200ff,
+ 0xe0000003,
+ 0x430206e8,
+ 0xb0401000,
+ 0x3c410003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb4230800,
+ 0x28220004,
+ 0x2b010738,
+ 0x5c200003,
+ 0x5b020738,
+ 0xe0000005,
+ 0x2b010738,
+ 0x340300c0,
+ 0xfbfff6ab,
+ 0x5b010738,
+ 0x396bf000,
+ 0x296202fc,
+ 0x2b010738,
+ 0x5022000c,
+ 0x43010735,
+ 0x4420000a,
+ 0x340100ff,
+ 0x34020001,
+ 0x34030000,
+ 0xfbffffa1,
+ 0x44200005,
+ 0x34010000,
+ 0x33010735,
+ 0x34010001,
+ 0x3301092b,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xfbffffb5,
+ 0xfbffffc4,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0x780dc020,
+ 0xb9a01000,
+ 0x38420130,
+ 0x28410000,
+ 0x340c0000,
+ 0x38210001,
+ 0x58410000,
+ 0xfbfffed3,
+ 0x78010003,
+ 0x38218ba8,
+ 0xb5815800,
+ 0x41630000,
+ 0x44600013,
+ 0x41620019,
+ 0x218100ff,
+ 0x3442ffff,
+ 0x31620019,
+ 0x204200ff,
+ 0x44400004,
+ 0x41620032,
+ 0x64420001,
+ 0x4440000a,
+ 0x31630019,
+ 0xfbfffeb9,
+ 0x3d810002,
+ 0x78020003,
+ 0x38428b24,
+ 0xb4220800,
+ 0x28210000,
+ 0xd8200000,
+ 0x31610032,
+ 0x358c0001,
+ 0x75810018,
+ 0x4420ffe7,
+ 0xfbfffea2,
+ 0xfbffffd1,
+ 0x43010830,
+ 0x44200011,
+ 0x43010831,
+ 0x7c210010,
+ 0x5c200003,
+ 0xf8003518,
+ 0xe000000c,
+ 0x43010831,
+ 0x4420000a,
+ 0x43010831,
+ 0x7c210001,
+ 0x5c200003,
+ 0xf800347f,
+ 0xe0000005,
+ 0x43010831,
+ 0x7c210002,
+ 0x5c200002,
+ 0xf800348a,
+ 0x3401001f,
+ 0xfbfffe99,
+ 0xb9a00800,
+ 0x38210130,
+ 0x28220000,
+ 0x3403fffe,
+ 0xa0431000,
+ 0x58220000,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x34010000,
+ 0xc3a00000,
+ 0xb8202000,
+ 0x206300ff,
+ 0x90003000,
+ 0x34010000,
+ 0xd0010000,
+ 0xa4402800,
+ 0x44600004,
+ 0x28810000,
+ 0xb8220800,
+ 0xe0000003,
+ 0x28810000,
+ 0xa0250800,
+ 0x58810000,
+ 0xd0060000,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x43010813,
+ 0x202400ff,
+ 0x5c800019,
+ 0x43010814,
+ 0x7c210001,
+ 0x5c200016,
+ 0x78030003,
+ 0x78020002,
+ 0x78010003,
+ 0x38218ba8,
+ 0x38638b24,
+ 0x38424a68,
+ 0x30240006,
+ 0x3024001f,
+ 0x58620018,
+ 0x33040814,
+ 0x33040812,
+ 0x78030003,
+ 0x330407ae,
+ 0x3863fdd0,
+ 0x28620000,
+ 0x7801ff00,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x58620000,
+ 0x330406e6,
+ 0xe0000045,
+ 0x34010001,
+ 0x7802c030,
+ 0x33010814,
+ 0x38420000,
+ 0x28410010,
+ 0x378b000c,
+ 0x28420014,
+ 0x202107ff,
+ 0x204207ff,
+ 0xfbfff6db,
+ 0x0f01080c,
+ 0x43010815,
+ 0xb9602800,
+ 0x3381000c,
+ 0x43010816,
+ 0x3381000d,
+ 0x430106e6,
+ 0x3381000f,
+ 0x2f01080c,
+ 0x2f020804,
+ 0x2021ffff,
+ 0x2f030806,
+ 0xdc401000,
+ 0x43040819,
+ 0xdc601800,
+ 0x208400ff,
+ 0xfbfff6ab,
+ 0x4382000c,
+ 0x78010003,
+ 0x3821f000,
+ 0x33020815,
+ 0x4382000d,
+ 0x33020816,
+ 0x402102f2,
+ 0x44200002,
+ 0x4381000f,
+ 0x330106e6,
+ 0x78010003,
+ 0x38218b20,
+ 0x28210000,
+ 0x402100d3,
+ 0x44200004,
+ 0x4382000f,
+ 0x330207ae,
+ 0xe0000002,
+ 0x330107ae,
+ 0x43010817,
+ 0xb9602800,
+ 0x3381000c,
+ 0x43010818,
+ 0x3381000d,
+ 0x430102bd,
+ 0x3381000e,
+ 0x2f01080e,
+ 0x2f020808,
+ 0x2021ffff,
+ 0x2f03080a,
+ 0xdc401000,
+ 0x43040819,
+ 0xdc601800,
+ 0x208400ff,
+ 0xfbfff663,
+ 0x4381000c,
+ 0x33010817,
+ 0x4382000d,
+ 0x33020818,
+ 0x4381000e,
+ 0x330102bd,
+ 0x34010000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x34060000,
+ 0x78050003,
+ 0x330607ae,
+ 0x38a5fdd0,
+ 0x28a30000,
+ 0x7801ff00,
+ 0x3821ffff,
+ 0x43020812,
+ 0xa0611800,
+ 0x78040003,
+ 0x204200ff,
+ 0x3c420010,
+ 0x78010002,
+ 0xb8621800,
+ 0x58a30000,
+ 0x330606e6,
+ 0x38848b24,
+ 0x38214aac,
+ 0x58810018,
+ 0x34020001,
+ 0x78010003,
+ 0x33020813,
+ 0x38218b20,
+ 0x28220000,
+ 0x78040003,
+ 0x3884f820,
+ 0x2c4100d4,
+ 0x78030003,
+ 0x38638ba8,
+ 0x0f010804,
+ 0x2c4100d6,
+ 0x0f010806,
+ 0x2c4100d4,
+ 0x0f010808,
+ 0x2c4100d6,
+ 0x0f01080a,
+ 0x28810000,
+ 0x2021ff00,
+ 0x00210008,
+ 0x30610006,
+ 0x3061001f,
+ 0xc3a00000,
+ 0x34010000,
+ 0x33010813,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x2f0107f0,
+ 0x78030002,
+ 0x34020000,
+ 0x38634e00,
+ 0x44220009,
+ 0x0f0207f0,
+ 0x2b0207e8,
+ 0x34010001,
+ 0x5c430005,
+ 0x2b0207ec,
+ 0xd8400000,
+ 0x2b0107ec,
+ 0x5b0107e8,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x78010003,
+ 0x38218b20,
+ 0x430207b0,
+ 0x28230000,
+ 0xb0401000,
+ 0xb8400800,
+ 0x44400010,
+ 0xe0000003,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x430107b0,
+ 0xb0200800,
+ 0x3422ffff,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4231800,
+ 0x40610000,
+ 0x3463ffec,
+ 0x5c20fff5,
+ 0x3442ffff,
+ 0xe3fffffc,
+ 0xc3a00000,
+ 0x78010003,
+ 0x38218b20,
+ 0x28240000,
+ 0x430107b0,
+ 0x288300c4,
+ 0xb0200800,
+ 0x34220001,
+ 0x5043000e,
+ 0x3c410002,
+ 0xb8602800,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4241800,
+ 0x40610000,
+ 0x34630014,
+ 0x44200003,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x34420001,
+ 0x50450002,
+ 0xe3fffff9,
+ 0x430107b0,
+ 0xb0200800,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x202b00ff,
+ 0x5d60002a,
+ 0x78020003,
+ 0xb8406000,
+ 0x38428dc5,
+ 0x40410000,
+ 0x5c20001f,
+ 0xfbffffc6,
+ 0x430207b0,
+ 0xb0401000,
+ 0x5c220006,
+ 0x78010003,
+ 0x38218dc4,
+ 0x34020007,
+ 0x30220000,
+ 0xe0000008,
+ 0xfbffffd4,
+ 0x430207b0,
+ 0xb0401000,
+ 0x5c220004,
+ 0x78010003,
+ 0x38218dc4,
+ 0x302b0000,
+ 0x2f0107f0,
+ 0xb9805800,
+ 0x396b8dc5,
+ 0x2f0207f2,
+ 0x2021ffff,
+ 0x2042ffff,
+ 0xfbfff568,
+ 0x78020003,
+ 0x38428dc4,
+ 0x40420000,
+ 0x3421ffff,
+ 0x31610000,
+ 0x5b0207a0,
+ 0xe000000d,
+ 0x3421ffff,
+ 0x30410000,
+ 0x430107b0,
+ 0xb0200800,
+ 0x5b0107a0,
+ 0xe0000007,
+ 0x7d610001,
+ 0x5c200005,
+ 0x78010003,
+ 0x38218dc5,
+ 0x34020000,
+ 0x30220000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x2f0207f0,
+ 0x34010001,
+ 0x44400007,
+ 0x2b0207e8,
+ 0x5b0207ec,
+ 0xfbffffbf,
+ 0x78010002,
+ 0x38214e00,
+ 0x5b0107e8,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x28430000,
+ 0xb8402000,
+ 0x7806ff00,
+ 0x2842001c,
+ 0xb8202800,
+ 0x38c6ffff,
+ 0xc8621800,
+ 0x3c620003,
+ 0x34010000,
+ 0xb4431000,
+ 0xb4431000,
+ 0x58820004,
+ 0x4c220004,
+ 0x28810020,
+ 0xa0260800,
+ 0x5c200004,
+ 0x28810008,
+ 0xb4220800,
+ 0x58810008,
+ 0x28820008,
+ 0x28a10008,
+ 0x4c410002,
+ 0xe0000003,
+ 0x28a10004,
+ 0x4c220002,
+ 0x58810008,
+ 0x28a10000,
+ 0x28820008,
+ 0x28a30014,
+ 0x94411000,
+ 0xb4431000,
+ 0x5882000c,
+ 0xc3a00000,
+ 0x2846000c,
+ 0xb8202800,
+ 0xb8402000,
+ 0x2821001c,
+ 0x28420010,
+ 0x34070000,
+ 0xa0c10800,
+ 0xb4411000,
+ 0x58820010,
+ 0x28a3001c,
+ 0xc8430800,
+ 0x3421ffff,
+ 0x50620003,
+ 0x58810010,
+ 0x34070001,
+ 0x28a10020,
+ 0x80c10800,
+ 0xb4270800,
+ 0x58810014,
+ 0x28a20018,
+ 0x50410002,
+ 0x58820014,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x202100ff,
+ 0x780b0003,
+ 0x7c230001,
+ 0x396b8b20,
+ 0x3702078c,
+ 0x5c200009,
+ 0x29610000,
+ 0x342100a0,
+ 0xfbffffbd,
+ 0x29610000,
+ 0x3702078c,
+ 0x342100a0,
+ 0xfbffffda,
+ 0xe0000004,
+ 0x5c600003,
+ 0x34010000,
+ 0x5b010794,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x78010003,
+ 0x38218b20,
+ 0x430207b0,
+ 0x28230000,
+ 0xb0401000,
+ 0xb8400800,
+ 0x44400011,
+ 0xe0000003,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x430107b0,
+ 0xb0200800,
+ 0x3422ffff,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4230800,
+ 0x34230011,
+ 0x40610000,
+ 0x3463ffec,
+ 0x5c20fff4,
+ 0x3442ffff,
+ 0xe3fffffc,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x38218b20,
+ 0x282c0000,
+ 0x7802c050,
+ 0x384200d8,
+ 0x28410000,
+ 0x4420ffff,
+ 0x340b0000,
+ 0x7801c020,
+ 0xb9601800,
+ 0x38210130,
+ 0x330b07b2,
+ 0x34020004,
+ 0xfbfffe5b,
+ 0x430207b1,
+ 0x78030003,
+ 0x38638b88,
+ 0xb0401000,
+ 0x3c410002,
+ 0x7808c020,
+ 0xb4220800,
+ 0x3c210002,
+ 0x39080014,
+ 0xb42c0800,
+ 0x2821000c,
+ 0x7806e3ff,
+ 0x78071c00,
+ 0x58610004,
+ 0x430107b1,
+ 0x38c6ffff,
+ 0x38e70000,
+ 0x330107b0,
+ 0x430207b1,
+ 0x78050003,
+ 0x78040002,
+ 0xb0401000,
+ 0x3c410002,
+ 0x38a58b24,
+ 0xb4220800,
+ 0x3c210002,
+ 0x388456c0,
+ 0xb42c0800,
+ 0x40220010,
+ 0x5b0207a8,
+ 0x29030000,
+ 0xb9600800,
+ 0x430207b0,
+ 0xa0661800,
+ 0x3c42001a,
+ 0x58a40004,
+ 0xa0471000,
+ 0xb8621800,
+ 0x59030000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x38218b20,
+ 0x28260000,
+ 0x7802c050,
+ 0x384200d8,
+ 0x28410000,
+ 0x4420ffff,
+ 0x430207b1,
+ 0x78030003,
+ 0x38638b88,
+ 0xb0401000,
+ 0x3c410002,
+ 0x7805c020,
+ 0xb4220800,
+ 0x3c210002,
+ 0x38a50014,
+ 0xb4260800,
+ 0x2821000c,
+ 0x78041c00,
+ 0x38840000,
+ 0x58610004,
+ 0x430107b1,
+ 0x7803e3ff,
+ 0x3863ffff,
+ 0x330107b0,
+ 0x430207b1,
+ 0xb0401000,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4260800,
+ 0x40210010,
+ 0x5b0107a8,
+ 0x28a20000,
+ 0x430107b0,
+ 0xa0431000,
+ 0x3c21001a,
+ 0xa0240800,
+ 0xb8411000,
+ 0x58a20000,
+ 0x430107b2,
+ 0x202400ff,
+ 0x5c800027,
+ 0x430107b6,
+ 0x5c200010,
+ 0x7801c020,
+ 0x38210114,
+ 0x58240000,
+ 0x330407b7,
+ 0x78030003,
+ 0x78020002,
+ 0x78010003,
+ 0x33040761,
+ 0x38218ba8,
+ 0x38638b24,
+ 0x38424a68,
+ 0x58620004,
+ 0x3024001a,
+ 0x30240001,
+ 0xe0000021,
+ 0x430107b8,
+ 0x7803c020,
+ 0x78050003,
+ 0x44200009,
+ 0x78010002,
+ 0x38630114,
+ 0x38a58b24,
+ 0x38215e24,
+ 0x58a10004,
+ 0x58640000,
+ 0x330407b7,
+ 0xe0000015,
+ 0x34020001,
+ 0x38630114,
+ 0x58620000,
+ 0x78010002,
+ 0x330207b7,
+ 0x38a58b24,
+ 0x382156c0,
+ 0x58a10004,
+ 0xe000000c,
+ 0x34030000,
+ 0x7801c020,
+ 0x38210130,
+ 0x34020004,
+ 0x330307b2,
+ 0xfbfffdd6,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x382156c0,
+ 0x58410004,
+ 0x34010000,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x202100ff,
+ 0x3c220002,
+ 0x78030003,
+ 0xb4411000,
+ 0x38638b20,
+ 0x28610000,
+ 0x3c420002,
+ 0xb4411000,
+ 0x40410011,
+ 0x5c200004,
+ 0x40410000,
+ 0xb8201000,
+ 0x44200002,
+ 0x34020001,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x430107b2,
+ 0x5c200038,
+ 0x780d0003,
+ 0x78010002,
+ 0x38215380,
+ 0x39ad8b24,
+ 0x59a10004,
+ 0x430107b8,
+ 0x44200004,
+ 0x430107b9,
+ 0x330107b1,
+ 0xe0000028,
+ 0x780c0003,
+ 0x398c8b20,
+ 0x29810000,
+ 0x402b00ca,
+ 0x216100ff,
+ 0xfbffffd8,
+ 0x44200006,
+ 0x330b07b1,
+ 0x29810000,
+ 0x402100c9,
+ 0x33010761,
+ 0xe000001c,
+ 0x430107b6,
+ 0x7802c020,
+ 0x202300ff,
+ 0x5c60000d,
+ 0x38420114,
+ 0x58430000,
+ 0x330307b7,
+ 0x78020002,
+ 0x78010003,
+ 0x33030761,
+ 0x38218ba8,
+ 0x38424a68,
+ 0x59a20004,
+ 0x3023001a,
+ 0x30230001,
+ 0xe0000099,
+ 0x34010001,
+ 0x38420114,
+ 0x58410000,
+ 0x330107b7,
+ 0x29820000,
+ 0x78010002,
+ 0x382156c0,
+ 0x59a10004,
+ 0x404100c9,
+ 0x33010761,
+ 0xe000008e,
+ 0x34030001,
+ 0x7801c020,
+ 0x330307b2,
+ 0x38210130,
+ 0x34020004,
+ 0xfbfffd7d,
+ 0x430207b1,
+ 0x780e0003,
+ 0x39ce8b20,
+ 0xb0401000,
+ 0x3c410002,
+ 0x29c30000,
+ 0xb4220800,
+ 0x3c210002,
+ 0x34020001,
+ 0xb4230800,
+ 0x28210004,
+ 0x340b0000,
+ 0x780dc050,
+ 0x2021ffff,
+ 0xf8001524,
+ 0x330b07b5,
+ 0x330b07b3,
+ 0x330b07b4,
+ 0x7804c020,
+ 0x330b07b5,
+ 0x38840014,
+ 0x28830000,
+ 0x78011fff,
+ 0x3821ffff,
+ 0x430207b1,
+ 0xa0611800,
+ 0x7801c020,
+ 0x3c42001d,
+ 0x38210130,
+ 0xb8621800,
+ 0x58830000,
+ 0x34020004,
+ 0x330b07b2,
+ 0xb9601800,
+ 0xfbfffd5a,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x382151b8,
+ 0x58410004,
+ 0x430207b1,
+ 0x29c70000,
+ 0x39ad00d4,
+ 0xb0401000,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4270800,
+ 0x40210001,
+ 0x59a10000,
+ 0x430207b1,
+ 0xb0401000,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4270800,
+ 0x40210012,
+ 0x20280008,
+ 0x450b0010,
+ 0x7803c050,
+ 0x386301c8,
+ 0x28610000,
+ 0x3402fe3f,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x38840118,
+ 0x28810000,
+ 0x34020001,
+ 0x38210002,
+ 0x58810000,
+ 0x59ab0000,
+ 0x33020919,
+ 0xe000003d,
+ 0x430107b1,
+ 0x780cc050,
+ 0x780fc050,
+ 0xb0200800,
+ 0x3c220002,
+ 0xb4411000,
+ 0x3c420002,
+ 0xb4471000,
+ 0x40410012,
+ 0x20210002,
+ 0x4420001b,
+ 0xb9802000,
+ 0x388401c8,
+ 0x28830000,
+ 0x3401fe3f,
+ 0xb9e02800,
+ 0x430207b1,
+ 0xa0611800,
+ 0x38a50118,
+ 0xb0401000,
+ 0x3c410002,
+ 0x34060001,
+ 0xb4220800,
+ 0x3c210002,
+ 0x3402fffd,
+ 0xb4270800,
+ 0x40210012,
+ 0x3c210006,
+ 0x202101c0,
+ 0xb8611800,
+ 0x58830000,
+ 0x28a10000,
+ 0xa0220800,
+ 0x58a10000,
+ 0x59a80000,
+ 0x33060919,
+ 0xe0000018,
+ 0x330b0919,
+ 0xf8001c2d,
+ 0x430207b1,
+ 0x29c30000,
+ 0xb9802800,
+ 0xb0401000,
+ 0x3c410002,
+ 0x38a501c8,
+ 0xb4220800,
+ 0x3c210002,
+ 0x3402fe3f,
+ 0xb4230800,
+ 0x40210001,
+ 0xb9e02000,
+ 0x38840118,
+ 0x59a10000,
+ 0x28a10000,
+ 0xa0220800,
+ 0x58a10000,
+ 0x28810000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0x58810000,
+ 0xfbfffec8,
+ 0x34010000,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cffe4,
+ 0x5b8b001c,
+ 0x5b8c0018,
+ 0x5b8d0014,
+ 0x5b8e0010,
+ 0x5b8f000c,
+ 0x5b900008,
+ 0x5b9d0004,
+ 0x780d0003,
+ 0xb9a00800,
+ 0x38218b20,
+ 0x282c0000,
+ 0xb9a07000,
+ 0x430107b6,
+ 0x44200004,
+ 0x430107b8,
+ 0x64210001,
+ 0x44200004,
+ 0xfbffff1e,
+ 0x34010000,
+ 0xe00001bc,
+ 0x430107c5,
+ 0x7c210001,
+ 0x5c200028,
+ 0x34010000,
+ 0x330107c5,
+ 0x430207b0,
+ 0xb0401000,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb42c0800,
+ 0x402b0000,
+ 0x5d60003e,
+ 0xfbfffd96,
+ 0x430207b0,
+ 0xb0401000,
+ 0x4422000c,
+ 0x34010007,
+ 0x5b0107a0,
+ 0x430207b0,
+ 0xb0401000,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb42c0800,
+ 0x4021000a,
+ 0x330107b3,
+ 0xe000002f,
+ 0xfbfffd70,
+ 0x430207b0,
+ 0xb0401000,
+ 0x4422002b,
+ 0x5b0b07a0,
+ 0x430107b0,
+ 0xb0200800,
+ 0x3c220002,
+ 0xb4411000,
+ 0x3c420002,
+ 0xb44c1000,
+ 0x4041000b,
+ 0x330107b4,
+ 0xe0000021,
+ 0x7805c020,
+ 0xb8a01000,
+ 0x38420114,
+ 0x7803c020,
+ 0x34010000,
+ 0x58410000,
+ 0x38630118,
+ 0x28640000,
+ 0x4c80ffff,
+ 0x780200ff,
+ 0x3842ffff,
+ 0x7801c020,
+ 0xa0821000,
+ 0x3821011c,
+ 0x28210000,
+ 0x08420064,
+ 0x38a50114,
+ 0x780b0003,
+ 0x8c411000,
+ 0x396bf900,
+ 0x340300e0,
+ 0x5b02078c,
+ 0x34010001,
+ 0x58a10000,
+ 0x2b02078c,
+ 0x29610020,
+ 0x3c420008,
+ 0xfbfff2d6,
+ 0x2b0207e8,
+ 0x59610020,
+ 0x34010000,
+ 0xd8400000,
+ 0x430107b2,
+ 0x202b00ff,
+ 0x5d60016e,
+ 0x430107b0,
+ 0x2b0207a0,
+ 0xb0200800,
+ 0x54220004,
+ 0x430107ae,
+ 0x64210002,
+ 0x442000a5,
+ 0x430107ae,
+ 0x7c210002,
+ 0x5c200015,
+ 0x34010001,
+ 0x330107ae,
+ 0x430307b0,
+ 0xb9c01000,
+ 0x38428b20,
+ 0xb0601800,
+ 0x3c610002,
+ 0x28420000,
+ 0xb4230800,
+ 0x3c210002,
+ 0xb4220800,
+ 0x4021000b,
+ 0x34210001,
+ 0x330107b4,
+ 0xfbfffdee,
+ 0x330107b1,
+ 0x430107b0,
+ 0xb0200800,
+ 0x5b0107a0,
+ 0xe0000006,
+ 0x430107b4,
+ 0x34210001,
+ 0x330107b4,
+ 0xfbfffd1e,
+ 0x330107b1,
+ 0x430207b0,
+ 0x780d0003,
+ 0x39ad8b20,
+ 0xb0401000,
+ 0x3c410002,
+ 0x29a30000,
+ 0xb4220800,
+ 0x3c210002,
+ 0x430207b4,
+ 0xb4230800,
+ 0x4021000b,
+ 0x204200ff,
+ 0x5022011f,
+ 0x34100000,
+ 0x331007b4,
+ 0x430207b0,
+ 0x430107b1,
+ 0xb0401000,
+ 0xb0200800,
+ 0x44410118,
+ 0x340f0001,
+ 0x7801c020,
+ 0x38210130,
+ 0x34020004,
+ 0xb9e01800,
+ 0x330f07b2,
+ 0xfbfffc4d,
+ 0x7805c020,
+ 0x38a50014,
+ 0x28a40000,
+ 0x78011fff,
+ 0x3821ffff,
+ 0x430207b1,
+ 0xa0812000,
+ 0x78030003,
+ 0x3c42001d,
+ 0x78010002,
+ 0xb8822000,
+ 0x382150c0,
+ 0x38638b24,
+ 0x58a40000,
+ 0x58610004,
+ 0x430207b1,
+ 0x29a60000,
+ 0x780cc050,
+ 0xb0401000,
+ 0x3c410002,
+ 0x398c00d4,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4260800,
+ 0x40210001,
+ 0x59810000,
+ 0x430207b1,
+ 0xb0401000,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4260800,
+ 0x40210012,
+ 0x20270008,
+ 0x44f0000e,
+ 0x7803c050,
+ 0x386301c8,
+ 0x28610000,
+ 0x3402fe3f,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x38840118,
+ 0x28810000,
+ 0x38210002,
+ 0x58810000,
+ 0x59900000,
+ 0xe0000023,
+ 0x430107b1,
+ 0x780bc050,
+ 0x780ec050,
+ 0xb0200800,
+ 0x3c220002,
+ 0xb4411000,
+ 0x3c420002,
+ 0xb4461000,
+ 0x40410012,
+ 0x20210002,
+ 0x4420001a,
+ 0xb9602000,
+ 0x388401c8,
+ 0x28830000,
+ 0x3401fe3f,
+ 0xb9c02800,
+ 0x430207b1,
+ 0xa0611800,
+ 0x38a50118,
+ 0xb0401000,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0x3402fffd,
+ 0xb4260800,
+ 0x40210012,
+ 0x3c210006,
+ 0x202101c0,
+ 0xb8611800,
+ 0x58830000,
+ 0x28a10000,
+ 0xa0220800,
+ 0x58a10000,
+ 0x59870000,
+ 0x330f0919,
+ 0xe0000018,
+ 0x33100919,
+ 0xf8001b18,
+ 0x430207b1,
+ 0x29a30000,
+ 0xb9602800,
+ 0xb0401000,
+ 0x3c410002,
+ 0x38a501c8,
+ 0xb4220800,
+ 0x3c210002,
+ 0x3402fe3f,
+ 0xb4230800,
+ 0x40210001,
+ 0xb9c02000,
+ 0x38840118,
+ 0x59810000,
+ 0x28a10000,
+ 0xa0220800,
+ 0x58a10000,
+ 0x28810000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0x58810000,
+ 0xfbfffd75,
+ 0xe00000a4,
+ 0x430107ae,
+ 0x7c210001,
+ 0x442000a1,
+ 0x430107b0,
+ 0x2b0207a0,
+ 0xb0200800,
+ 0x5022009d,
+ 0x430107b3,
+ 0xb9a07800,
+ 0x39ef8b20,
+ 0x34210001,
+ 0x330107b3,
+ 0xfbfffc9f,
+ 0x330107b1,
+ 0x330b07b5,
+ 0x430207b0,
+ 0x29e40000,
+ 0xb0401000,
+ 0x3c410002,
+ 0x430307b3,
+ 0xb4220800,
+ 0x3c210002,
+ 0x206300ff,
+ 0xb4240800,
+ 0x4021000a,
+ 0x5023008a,
+ 0x430207b0,
+ 0x430107b1,
+ 0xb0401000,
+ 0xb0200800,
+ 0x44410082,
+ 0x430307b1,
+ 0x34020001,
+ 0xb8406800,
+ 0xb0601800,
+ 0x3c610002,
+ 0x780cc050,
+ 0xb4230800,
+ 0x3c210002,
+ 0x398c00d4,
+ 0xb4240800,
+ 0x28210004,
+ 0x2021ffff,
+ 0xf800136a,
+ 0x7801c020,
+ 0x38210130,
+ 0x34020004,
+ 0xb9a01800,
+ 0x330d07b2,
+ 0xfbfffbae,
+ 0x330b07b3,
+ 0x330b07b4,
+ 0x7805c020,
+ 0x330b07b5,
+ 0x38a50014,
+ 0x28a40000,
+ 0x78011fff,
+ 0x3821ffff,
+ 0x430207b1,
+ 0xa0812000,
+ 0x78030003,
+ 0x3c42001d,
+ 0x78010002,
+ 0xb8822000,
+ 0x382151b8,
+ 0x38638b24,
+ 0x58a40000,
+ 0x58610004,
+ 0x430207b1,
+ 0x29e60000,
+ 0xb0401000,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4260800,
+ 0x40210001,
+ 0x59810000,
+ 0x430207b1,
+ 0xb0401000,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4260800,
+ 0x40210012,
+ 0x20270008,
+ 0x44e0000e,
+ 0x7803c050,
+ 0x386301c8,
+ 0x28610000,
+ 0x3402fe3f,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x38840118,
+ 0x28810000,
+ 0x38210002,
+ 0x58810000,
+ 0x598b0000,
+ 0xe0000023,
+ 0x430107b1,
+ 0x780bc050,
+ 0x780ec050,
+ 0xb0200800,
+ 0x3c220002,
+ 0xb4411000,
+ 0x3c420002,
+ 0xb4461000,
+ 0x40410012,
+ 0x20210002,
+ 0x4420001a,
+ 0xb9602000,
+ 0x388401c8,
+ 0x28830000,
+ 0x3401fe3f,
+ 0xb9c02800,
+ 0x430207b1,
+ 0xa0611800,
+ 0x38a50118,
+ 0xb0401000,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0x3402fffd,
+ 0xb4260800,
+ 0x40210012,
+ 0x3c210006,
+ 0x202101c0,
+ 0xb8611800,
+ 0x58830000,
+ 0x28a10000,
+ 0xa0220800,
+ 0x58a10000,
+ 0x59870000,
+ 0x330d0919,
+ 0xe0000018,
+ 0x33010919,
+ 0xf8001a78,
+ 0x430207b1,
+ 0x29e30000,
+ 0xb9602800,
+ 0xb0401000,
+ 0x3c410002,
+ 0x38a501c8,
+ 0xb4220800,
+ 0x3c210002,
+ 0x3402fe3f,
+ 0xb4230800,
+ 0x40210001,
+ 0xb9c02000,
+ 0x38840118,
+ 0x59810000,
+ 0x28a10000,
+ 0xa0220800,
+ 0x58a10000,
+ 0x28810000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0x58810000,
+ 0xfbfffd13,
+ 0xe0000004,
+ 0x430107b3,
+ 0x3421ffff,
+ 0x330107b3,
+ 0x430107b0,
+ 0x2b0207a0,
+ 0xb0200800,
+ 0x5441001c,
+ 0x430107b5,
+ 0x78050003,
+ 0x38a58b20,
+ 0x34210001,
+ 0x330107b5,
+ 0x430207b0,
+ 0x28a40000,
+ 0xb0401000,
+ 0x3c410002,
+ 0x430307b5,
+ 0xb4220800,
+ 0x3c210002,
+ 0x206300ff,
+ 0xb4240800,
+ 0x40210003,
+ 0x5023000c,
+ 0x34010000,
+ 0x330107b5,
+ 0x430207b0,
+ 0x28a30000,
+ 0xb0401000,
+ 0x3c410002,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4230800,
+ 0x28210004,
+ 0x0f01074a,
+ 0x34010001,
+ 0x2b8b001c,
+ 0x2b8c0018,
+ 0x2b8d0014,
+ 0x2b8e0010,
+ 0x2b8f000c,
+ 0x2b900008,
+ 0x2b9d0004,
+ 0x379c001c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x430107b8,
+ 0x7805c020,
+ 0x78040003,
+ 0x78020002,
+ 0x38a50114,
+ 0x34060001,
+ 0x38848b24,
+ 0x384256c0,
+ 0x202100ff,
+ 0x34030000,
+ 0x44230008,
+ 0x430207b9,
+ 0x430107b0,
+ 0x204200ff,
+ 0xb0200800,
+ 0x44410007,
+ 0xfbfffd45,
+ 0xe0000004,
+ 0x58a60000,
+ 0x330607b7,
+ 0x58820004,
+ 0xb8201800,
+ 0xb8600800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x38218b20,
+ 0x28210000,
+ 0x402100c8,
+ 0x44200010,
+ 0x430107b7,
+ 0x5c20000f,
+ 0x430107b8,
+ 0x34020001,
+ 0x5c20000c,
+ 0x330207b6,
+ 0xfbfffd2e,
+ 0x78010003,
+ 0x3821f820,
+ 0x28220000,
+ 0x78010003,
+ 0x38218ba8,
+ 0x30220001,
+ 0x3022001a,
+ 0xe0000002,
+ 0x330107b6,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x430107b7,
+ 0x340b0000,
+ 0x5c2b002b,
+ 0x430107b8,
+ 0x5c2b0029,
+ 0x34010001,
+ 0x330107b6,
+ 0xfbfffd17,
+ 0x78010003,
+ 0x3821f820,
+ 0x28220000,
+ 0x78030003,
+ 0x3863f818,
+ 0x78010003,
+ 0x38218ba8,
+ 0x30220001,
+ 0x3022001a,
+ 0x28620000,
+ 0x78010003,
+ 0x38218b20,
+ 0x28210000,
+ 0x38420004,
+ 0x58620000,
+ 0x282300c4,
+ 0xb9601000,
+ 0x51630011,
+ 0xb8202800,
+ 0xb8602000,
+ 0x34060001,
+ 0x3c410002,
+ 0xbcc21800,
+ 0xb4220800,
+ 0x3c210002,
+ 0x34420001,
+ 0xb4250800,
+ 0x40210000,
+ 0xb9631800,
+ 0x204200ff,
+ 0x44200002,
+ 0x206b00ff,
+ 0x50440002,
+ 0xe3fffff4,
+ 0x78010003,
+ 0x3821f900,
+ 0x302b0026,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x34010000,
+ 0x78030003,
+ 0x330107b6,
+ 0x3863f818,
+ 0x28610000,
+ 0x3402fffb,
+ 0xa0220800,
+ 0x58610000,
+ 0xc3a00000,
+ 0x202400ff,
+ 0x340100ff,
+ 0x44800011,
+ 0x7802c050,
+ 0x384200d8,
+ 0x28410000,
+ 0x20210001,
+ 0x4420fffe,
+ 0x7801c050,
+ 0x382100d4,
+ 0x7803c050,
+ 0x58240000,
+ 0x386300d8,
+ 0x28610000,
+ 0x18210001,
+ 0x20220001,
+ 0x64410000,
+ 0x4420fffc,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x7802e000,
+ 0x38423020,
+ 0x28420000,
+ 0x08420064,
+ 0x3c420008,
+ 0x8c411800,
+ 0x00610008,
+ 0x00620006,
+ 0x34240040,
+ 0x204200ff,
+ 0x34011fff,
+ 0x50230003,
+ 0x208200ff,
+ 0xe0000008,
+ 0xb4630800,
+ 0x3421e000,
+ 0x00240008,
+ 0x34010fff,
+ 0x50230003,
+ 0x34810040,
+ 0x202200ff,
+ 0x74410007,
+ 0x5c200002,
+ 0x34020008,
+ 0x204100ff,
+ 0xc3a00000,
+ 0x78020003,
+ 0x3842f000,
+ 0x4043004e,
+ 0x34040000,
+ 0x34020001,
+ 0xbc411000,
+ 0x48610002,
+ 0xe0000004,
+ 0x2b010094,
+ 0xa0220800,
+ 0x7c240000,
+ 0xb8800800,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x780c0003,
+ 0x4301008a,
+ 0xb9801000,
+ 0x3842f000,
+ 0x4042004e,
+ 0x34210001,
+ 0x202b00ff,
+ 0x5162000d,
+ 0xb9600800,
+ 0xfbffffe6,
+ 0xb9801800,
+ 0x3863f000,
+ 0x35620001,
+ 0x44200003,
+ 0xb9600800,
+ 0xe0000007,
+ 0x4061004e,
+ 0x204b00ff,
+ 0x51610002,
+ 0xe3fffff5,
+ 0x4301008a,
+ 0x202100ff,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x3821f000,
+ 0x4021004e,
+ 0x4302008a,
+ 0x3421ffff,
+ 0x202b00ff,
+ 0x204200ff,
+ 0x504b000c,
+ 0xb9600800,
+ 0xfbffffc8,
+ 0x3562ffff,
+ 0x44200003,
+ 0xb9600800,
+ 0xe0000008,
+ 0x4301008a,
+ 0x204b00ff,
+ 0x202100ff,
+ 0x502b0002,
+ 0xe3fffff6,
+ 0x4301008a,
+ 0x202100ff,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x4301008a,
+ 0x202100ff,
+ 0x342bffff,
+ 0x34010000,
+ 0x482b0008,
+ 0xb9600800,
+ 0xfbffffaf,
+ 0x44200003,
+ 0x216100ff,
+ 0xe0000005,
+ 0x356bffff,
+ 0xe3fffff9,
+ 0x4301008a,
+ 0x202100ff,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0xb8206000,
+ 0x4021000c,
+ 0x20260008,
+ 0x44c00011,
+ 0x7803c050,
+ 0x386301c8,
+ 0x28610000,
+ 0x34028fff,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x38840118,
+ 0x28810000,
+ 0x7802c050,
+ 0x384200a4,
+ 0x38210010,
+ 0x58810000,
+ 0x34010000,
+ 0x58410000,
+ 0xe0000015,
+ 0x20220002,
+ 0x780bc050,
+ 0x44400015,
+ 0x7805c050,
+ 0x38a501c8,
+ 0x28a30000,
+ 0x3c21000c,
+ 0x34028fff,
+ 0xa0621800,
+ 0x20217000,
+ 0xb8611800,
+ 0x7804c050,
+ 0x58a30000,
+ 0x38840118,
+ 0x28810000,
+ 0x3402ffef,
+ 0x396b00a4,
+ 0xa0220800,
+ 0x58810000,
+ 0x59660000,
+ 0x34010001,
+ 0x3301091b,
+ 0xe0000017,
+ 0x3302091b,
+ 0xf8001906,
+ 0x4181000a,
+ 0x396b00a4,
+ 0x7802c050,
+ 0x59610000,
+ 0x384200a8,
+ 0x28410000,
+ 0x20210001,
+ 0x4420fffe,
+ 0x7803c050,
+ 0x386301c8,
+ 0x28610000,
+ 0x34028fff,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x38840118,
+ 0x28810000,
+ 0x3402ffef,
+ 0xa0220800,
+ 0x58810000,
+ 0x4181000d,
+ 0x20260008,
+ 0x44c00011,
+ 0x7803c050,
+ 0x386301c8,
+ 0x28610000,
+ 0x3402f1ff,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x38840118,
+ 0x28810000,
+ 0x7802c050,
+ 0x3842009c,
+ 0x38210008,
+ 0x58810000,
+ 0x34010000,
+ 0x58410000,
+ 0xe0000015,
+ 0x20220002,
+ 0x780bc050,
+ 0x44400015,
+ 0x7805c050,
+ 0x38a501c8,
+ 0x28a30000,
+ 0x3c210009,
+ 0x3402f1ff,
+ 0xa0621800,
+ 0x20210e00,
+ 0xb8611800,
+ 0x7804c050,
+ 0x58a30000,
+ 0x38840118,
+ 0x28810000,
+ 0x3402fff7,
+ 0x396b009c,
+ 0xa0220800,
+ 0x58810000,
+ 0x59660000,
+ 0x34010001,
+ 0x3301091c,
+ 0xe0000017,
+ 0x3302091c,
+ 0xf80018c6,
+ 0x4181000b,
+ 0x396b009c,
+ 0x7802c050,
+ 0x59610000,
+ 0x384200a0,
+ 0x28410000,
+ 0x20210001,
+ 0x4420fffe,
+ 0x7803c050,
+ 0x386301c8,
+ 0x28610000,
+ 0x3402f1ff,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x38840118,
+ 0x28810000,
+ 0x3402fff7,
+ 0xa0220800,
+ 0x58810000,
+ 0x29820000,
+ 0x78010003,
+ 0x38218b88,
+ 0x58220008,
+ 0x298c0004,
+ 0x582c000c,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x2f02073c,
+ 0x78030003,
+ 0x3863f148,
+ 0x2f010754,
+ 0x34050000,
+ 0x54220025,
+ 0x4301008b,
+ 0x202100ff,
+ 0x3c210004,
+ 0xb4230800,
+ 0xfbffff64,
+ 0x4303008b,
+ 0x78020003,
+ 0x78010002,
+ 0x3303008a,
+ 0x38428b24,
+ 0x38216788,
+ 0x58410030,
+ 0x43020089,
+ 0x43010088,
+ 0x5c220009,
+ 0x4301008d,
+ 0x34030000,
+ 0x34020001,
+ 0x44230003,
+ 0x3303008d,
+ 0xe0000005,
+ 0x33020087,
+ 0xe0000003,
+ 0x43010088,
+ 0x33010089,
+ 0x7804e000,
+ 0x38843028,
+ 0x28830000,
+ 0x3402f1ff,
+ 0x34050001,
+ 0x4301008a,
+ 0xa0621800,
+ 0x3c210009,
+ 0x20210e00,
+ 0xb8611800,
+ 0x58830000,
+ 0xb8a00800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x7805e000,
+ 0x38a53028,
+ 0x28a20000,
+ 0x202100ff,
+ 0x3c230006,
+ 0x3404fe3f,
+ 0xa0441000,
+ 0x206301c0,
+ 0xb8431000,
+ 0x58a20000,
+ 0x3301008b,
+ 0x34030001,
+ 0x3c210004,
+ 0x78020003,
+ 0x33030766,
+ 0x3842f148,
+ 0x33030766,
+ 0xb4220800,
+ 0x2c210008,
+ 0x34020006,
+ 0xf80010f5,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x3821645c,
+ 0x58410030,
+ 0xfbffffb4,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x4301008c,
+ 0x340b0000,
+ 0x442b0016,
+ 0x330b008c,
+ 0x43010086,
+ 0x5c2b0013,
+ 0x4302008a,
+ 0x340c0001,
+ 0x2b010094,
+ 0xbd821000,
+ 0xa0220800,
+ 0x5c2b000d,
+ 0xfbfffec0,
+ 0xb8205800,
+ 0x4301008a,
+ 0x202100ff,
+ 0x5c2b0003,
+ 0xfbfffef6,
+ 0xb8205800,
+ 0x4301008a,
+ 0x202100ff,
+ 0x442b0003,
+ 0x330c008d,
+ 0xe0000049,
+ 0x4301008e,
+ 0x202c00ff,
+ 0x5d800025,
+ 0x43010086,
+ 0x202b00ff,
+ 0x65610002,
+ 0x5c200012,
+ 0x69610002,
+ 0x5c200004,
+ 0x65610001,
+ 0x5c200005,
+ 0xe0000043,
+ 0x65610004,
+ 0x5c200012,
+ 0xe0000040,
+ 0xfbfffea5,
+ 0x330c0086,
+ 0x4302008a,
+ 0x204200ff,
+ 0x5c410036,
+ 0x34010002,
+ 0x33010087,
+ 0xb9600800,
+ 0xe0000038,
+ 0xfbfffed7,
+ 0x330c0086,
+ 0x4302008a,
+ 0x204200ff,
+ 0x5c41002d,
+ 0x330b0087,
+ 0xe0000030,
+ 0xfbfffeb4,
+ 0x330c0086,
+ 0x4302008a,
+ 0x204200ff,
+ 0x5c410026,
+ 0x34010001,
+ 0x33010087,
+ 0xe0000029,
+ 0x2f01009c,
+ 0x5c200023,
+ 0x4301008e,
+ 0x7c210001,
+ 0x5c20000a,
+ 0xfbfffe88,
+ 0xb8205800,
+ 0x4301008a,
+ 0x202100ff,
+ 0x5c2b0011,
+ 0x34010002,
+ 0x3301008e,
+ 0xfbfffebc,
+ 0xe000000c,
+ 0x4301008e,
+ 0x7c210002,
+ 0x5c20000a,
+ 0xfbfffeb7,
+ 0xb8205800,
+ 0x4301008a,
+ 0x202100ff,
+ 0x5c2b0005,
+ 0x34010001,
+ 0x3301008e,
+ 0xfbfffe75,
+ 0xb8205800,
+ 0x2f010098,
+ 0x2f02009a,
+ 0x2021ffff,
+ 0x2042ffff,
+ 0xfbffef41,
+ 0x3421ffff,
+ 0x0f01009c,
+ 0xb9600800,
+ 0xfbffff7b,
+ 0xe0000005,
+ 0x2f01009c,
+ 0x3421ffff,
+ 0x0f01009c,
+ 0x34010001,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x2f010098,
+ 0x34020000,
+ 0x34030001,
+ 0x44220003,
+ 0x0f02009c,
+ 0x3303008e,
+ 0xc3a00000,
+ 0x34010000,
+ 0x3301008e,
+ 0x0f010098,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x43020088,
+ 0x43010089,
+ 0x4422006f,
+ 0x43010088,
+ 0x5c200068,
+ 0x430100a2,
+ 0x7804c050,
+ 0x7805c050,
+ 0x7806c050,
+ 0x5c200018,
+ 0x388401c8,
+ 0x28830000,
+ 0x34028fff,
+ 0x38a50118,
+ 0x4301009e,
+ 0xa0621800,
+ 0x3402ffef,
+ 0x3c21000c,
+ 0x38c600a4,
+ 0x20217000,
+ 0xb8611800,
+ 0x58830000,
+ 0x28a30000,
+ 0x430100a0,
+ 0xa0621800,
+ 0x3c210004,
+ 0x20210010,
+ 0xb8611800,
+ 0x58a30000,
+ 0x430100a2,
+ 0x202100ff,
+ 0x58c10000,
+ 0xe0000017,
+ 0x430100a2,
+ 0x38c600a4,
+ 0x388401c8,
+ 0x202100ff,
+ 0x58c10000,
+ 0x28830000,
+ 0x34028fff,
+ 0x38a50118,
+ 0x4301009e,
+ 0xa0621800,
+ 0x3402ffef,
+ 0x3c21000c,
+ 0x20217000,
+ 0xb8611800,
+ 0x58830000,
+ 0x28a30000,
+ 0x430100a0,
+ 0xa0621800,
+ 0x3c210004,
+ 0x20210010,
+ 0xb8611800,
+ 0x58a30000,
+ 0x430100a3,
+ 0x7804c050,
+ 0x7805c050,
+ 0x7806c050,
+ 0x5c200018,
+ 0x388401c8,
+ 0x28830000,
+ 0x3402f1ff,
+ 0x38a50118,
+ 0x4301009f,
+ 0xa0621800,
+ 0x3402fff7,
+ 0x3c210009,
+ 0x38c6009c,
+ 0x20210e00,
+ 0xb8611800,
+ 0x58830000,
+ 0x28a30000,
+ 0x430100a1,
+ 0xa0621800,
+ 0x3c210003,
+ 0x20210008,
+ 0xb8611800,
+ 0x58a30000,
+ 0x430100a3,
+ 0x202100ff,
+ 0x58c10000,
+ 0xe0000017,
+ 0x430100a3,
+ 0x38c6009c,
+ 0x388401c8,
+ 0x202100ff,
+ 0x58c10000,
+ 0x28830000,
+ 0x3402f1ff,
+ 0x38a50118,
+ 0x4301009f,
+ 0xa0621800,
+ 0x3402fff7,
+ 0x3c210009,
+ 0x20210e00,
+ 0xb8611800,
+ 0x58830000,
+ 0x28a30000,
+ 0x430100a1,
+ 0xa0621800,
+ 0x3c210003,
+ 0x20210008,
+ 0xb8611800,
+ 0x58a30000,
+ 0x34010000,
+ 0x33010089,
+ 0xe0000006,
+ 0x78010003,
+ 0x3821f000,
+ 0x402102e8,
+ 0xfbfffef4,
+ 0xe0000007,
+ 0x43010089,
+ 0x202100ff,
+ 0x44200003,
+ 0xfbffff0f,
+ 0xe0000002,
+ 0x33010766,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x78010003,
+ 0x3821f900,
+ 0x28210008,
+ 0x78060003,
+ 0x78070003,
+ 0x78050003,
+ 0x78040002,
+ 0x78030003,
+ 0x38c68ba8,
+ 0x38e7f000,
+ 0x38a58b24,
+ 0x38846788,
+ 0x34080001,
+ 0x34020000,
+ 0x38638b88,
+ 0x20210010,
+ 0x4422000c,
+ 0x40e702ec,
+ 0x58a40030,
+ 0x30c80025,
+ 0x30c7000c,
+ 0x33020086,
+ 0x33020766,
+ 0x33020089,
+ 0x5862000c,
+ 0x58620008,
+ 0x33080088,
+ 0xc3a00000,
+ 0x33010088,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b8e0004,
+ 0x43010088,
+ 0x7804c050,
+ 0x7805c050,
+ 0x7803c050,
+ 0x7806c050,
+ 0x78090003,
+ 0x780c0003,
+ 0x780b0003,
+ 0x780a0002,
+ 0x78070003,
+ 0x78080003,
+ 0x780d0003,
+ 0x388400a4,
+ 0x38a5009c,
+ 0x386301c8,
+ 0x38c60118,
+ 0x39298ba8,
+ 0x398cf000,
+ 0x396b8b24,
+ 0x394a6788,
+ 0x340e0001,
+ 0x38e78b88,
+ 0x3908f818,
+ 0x39adf900,
+ 0x202200ff,
+ 0x5c400026,
+ 0x28810000,
+ 0x2021007f,
+ 0x330100a2,
+ 0x28a10000,
+ 0x2021007f,
+ 0x330100a3,
+ 0x28610000,
+ 0x20217000,
+ 0x0021000c,
+ 0x3301009e,
+ 0x28610000,
+ 0x20210e00,
+ 0x00210009,
+ 0x3301009f,
+ 0x28c10000,
+ 0x20210010,
+ 0x00210004,
+ 0x330100a0,
+ 0x28c10000,
+ 0x20210008,
+ 0x00210003,
+ 0x330100a1,
+ 0x418c02ec,
+ 0x312e0025,
+ 0x596a0030,
+ 0x312c000c,
+ 0x33020086,
+ 0x33020766,
+ 0x33020089,
+ 0x58e2000c,
+ 0x58e20008,
+ 0x330e0088,
+ 0x29010000,
+ 0x38210008,
+ 0x59010000,
+ 0x2b010094,
+ 0x31a10028,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b8e0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x34010000,
+ 0x78030003,
+ 0x33010088,
+ 0x3863f818,
+ 0x28610000,
+ 0x3402fff7,
+ 0xa0220800,
+ 0x58610000,
+ 0xc3a00000,
+ 0x78020003,
+ 0x3842f000,
+ 0x40430051,
+ 0x34040000,
+ 0x34020001,
+ 0xbc411000,
+ 0x48610002,
+ 0xe0000004,
+ 0x2b010108,
+ 0xa0220800,
+ 0x7c240000,
+ 0xb8800800,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x780c0003,
+ 0x430100f9,
+ 0xb9801000,
+ 0x3842f000,
+ 0x40420051,
+ 0x34210001,
+ 0x202b00ff,
+ 0x5162000d,
+ 0xb9600800,
+ 0xfbffffe6,
+ 0xb9801800,
+ 0x3863f000,
+ 0x35620001,
+ 0x44200003,
+ 0xb9600800,
+ 0xe0000007,
+ 0x40610051,
+ 0x204b00ff,
+ 0x51610002,
+ 0xe3fffff5,
+ 0x430100f9,
+ 0x202100ff,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x3821f000,
+ 0x40210051,
+ 0x430200f9,
+ 0x3421ffff,
+ 0x202b00ff,
+ 0x204200ff,
+ 0x504b000c,
+ 0xb9600800,
+ 0xfbffffc8,
+ 0x3562ffff,
+ 0x44200003,
+ 0xb9600800,
+ 0xe0000008,
+ 0x430100f9,
+ 0x204b00ff,
+ 0x202100ff,
+ 0x502b0002,
+ 0xe3fffff6,
+ 0x430100f9,
+ 0x202100ff,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x430100f9,
+ 0x202100ff,
+ 0x342bffff,
+ 0x34010000,
+ 0x482b0008,
+ 0xb9600800,
+ 0xfbffffaf,
+ 0x44200003,
+ 0x216100ff,
+ 0xe0000005,
+ 0x356bffff,
+ 0xe3fffff9,
+ 0x430100f9,
+ 0x202100ff,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x40230007,
+ 0xb8206000,
+ 0x20660008,
+ 0x44c00012,
+ 0x7803c050,
+ 0x386301c8,
+ 0x28620000,
+ 0x7801f8ff,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x7804c050,
+ 0x58620000,
+ 0x38840118,
+ 0x28810000,
+ 0x7802c050,
+ 0x384200e4,
+ 0x38210400,
+ 0x58810000,
+ 0x34010000,
+ 0x58410000,
+ 0xe0000018,
+ 0x20610002,
+ 0x780bc050,
+ 0x44200018,
+ 0x7805c050,
+ 0x38a501c8,
+ 0x28a40000,
+ 0x3c630018,
+ 0x7801f8ff,
+ 0x78020700,
+ 0x3821ffff,
+ 0x38420000,
+ 0xa0621800,
+ 0xa0812000,
+ 0xb8832000,
+ 0x7803c050,
+ 0x58a40000,
+ 0x38630118,
+ 0x28610000,
+ 0x3402fbff,
+ 0x396b00e4,
+ 0xa0220800,
+ 0x58610000,
+ 0x59660000,
+ 0x34010001,
+ 0x33010921,
+ 0xe0000018,
+ 0x33010921,
+ 0xf800165d,
+ 0x41810006,
+ 0x396b00e4,
+ 0x7802c050,
+ 0x59610000,
+ 0x384200e8,
+ 0x28410000,
+ 0x20210001,
+ 0x4420fffe,
+ 0x7804c050,
+ 0x388401c8,
+ 0x28820000,
+ 0x7801f8ff,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x7803c050,
+ 0x58820000,
+ 0x38630118,
+ 0x28610000,
+ 0x3402fbff,
+ 0xa0220800,
+ 0x58610000,
+ 0x298c0000,
+ 0x78010003,
+ 0x38218b88,
+ 0x582c0010,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x2f02073c,
+ 0x78030003,
+ 0x3863f288,
+ 0x2f01075a,
+ 0x34060000,
+ 0x5422002a,
+ 0x430200fa,
+ 0x204200ff,
+ 0x3c410001,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4230800,
+ 0xfbffff9f,
+ 0x430300fa,
+ 0x78020003,
+ 0x78010002,
+ 0x330300f9,
+ 0x38428b24,
+ 0x3821714c,
+ 0x5841003c,
+ 0x430200f8,
+ 0x430100f7,
+ 0x5c220009,
+ 0x430100fe,
+ 0x34030000,
+ 0x34020001,
+ 0x44230003,
+ 0x330300fe,
+ 0xe0000005,
+ 0x330200f6,
+ 0xe0000003,
+ 0x430100f7,
+ 0x330100f8,
+ 0x7805e000,
+ 0x38a53028,
+ 0x28a20000,
+ 0x7803c7ff,
+ 0x78043800,
+ 0x430100f9,
+ 0x3863ffff,
+ 0x38840000,
+ 0x3c21001b,
+ 0xa0431000,
+ 0xa0240800,
+ 0xb8411000,
+ 0x34060001,
+ 0x58a20000,
+ 0xb8c00800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x7807e000,
+ 0x38e73028,
+ 0x28e50000,
+ 0x202100ff,
+ 0x3c260018,
+ 0x7802f8ff,
+ 0x78040700,
+ 0x38840000,
+ 0x3842ffff,
+ 0xa0c43000,
+ 0x3c230001,
+ 0xa0a22800,
+ 0xb8a62800,
+ 0x58e50000,
+ 0xb4611800,
+ 0x330100fa,
+ 0x3c630002,
+ 0x78020003,
+ 0x3842f288,
+ 0x34010001,
+ 0xb4621800,
+ 0x33010769,
+ 0x2c610004,
+ 0x34020009,
+ 0xf8000e84,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x38216dfc,
+ 0x5841003c,
+ 0xfbffffab,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x430100fb,
+ 0x340b0000,
+ 0x442b0016,
+ 0x330b00fb,
+ 0x430100f5,
+ 0x5c2b0013,
+ 0x430200f9,
+ 0x340c0001,
+ 0x2b010108,
+ 0xbd821000,
+ 0xa0220800,
+ 0x5c2b000d,
+ 0xfbfffef4,
+ 0xb8205800,
+ 0x430100f9,
+ 0x202100ff,
+ 0x5c2b0003,
+ 0xfbffff2a,
+ 0xb8205800,
+ 0x430100f9,
+ 0x202100ff,
+ 0x442b0003,
+ 0x330c00fe,
+ 0xe0000049,
+ 0x430100ff,
+ 0x202c00ff,
+ 0x5d800025,
+ 0x430100f5,
+ 0x202b00ff,
+ 0x65610002,
+ 0x5c200012,
+ 0x69610002,
+ 0x5c200004,
+ 0x65610001,
+ 0x5c200005,
+ 0xe0000043,
+ 0x65610004,
+ 0x5c200012,
+ 0xe0000040,
+ 0xfbfffed9,
+ 0x330c00f5,
+ 0x430200f9,
+ 0x204200ff,
+ 0x5c410036,
+ 0x34010002,
+ 0x330100f6,
+ 0xb9600800,
+ 0xe0000038,
+ 0xfbffff0b,
+ 0x330c00f5,
+ 0x430200f9,
+ 0x204200ff,
+ 0x5c41002d,
+ 0x330b00f6,
+ 0xe0000030,
+ 0xfbfffee8,
+ 0x330c00f5,
+ 0x430200f9,
+ 0x204200ff,
+ 0x5c410026,
+ 0x34010001,
+ 0x330100f6,
+ 0xe0000029,
+ 0x2f0100fc,
+ 0x5c200023,
+ 0x430100ff,
+ 0x7c210001,
+ 0x5c20000a,
+ 0xfbfffebc,
+ 0xb8205800,
+ 0x430100f9,
+ 0x202100ff,
+ 0x5c2b0011,
+ 0x34010002,
+ 0x330100ff,
+ 0xfbfffef0,
+ 0xe000000c,
+ 0x430100ff,
+ 0x7c210002,
+ 0x5c20000a,
+ 0xfbfffeeb,
+ 0xb8205800,
+ 0x430100f9,
+ 0x202100ff,
+ 0x5c2b0005,
+ 0x34010001,
+ 0x330100ff,
+ 0xfbfffea9,
+ 0xb8205800,
+ 0x2f01010c,
+ 0x2f02010e,
+ 0x2021ffff,
+ 0x2042ffff,
+ 0xfbffecd0,
+ 0x3421ffff,
+ 0x0f0100fc,
+ 0xb9600800,
+ 0xfbffff77,
+ 0xe0000005,
+ 0x2f0100fc,
+ 0x3421ffff,
+ 0x0f0100fc,
+ 0x34010001,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x2f01010c,
+ 0x34020000,
+ 0x34030001,
+ 0x44220003,
+ 0x0f0200fc,
+ 0x330300ff,
+ 0xc3a00000,
+ 0x34010000,
+ 0x330100ff,
+ 0x0f01010c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x430200f7,
+ 0x430100f8,
+ 0x44220041,
+ 0x430100f7,
+ 0x5c20003a,
+ 0x43010110,
+ 0x7803c050,
+ 0x7805f8ff,
+ 0x78060700,
+ 0x7804c050,
+ 0x7807c050,
+ 0x5c200019,
+ 0x386301c8,
+ 0x28620000,
+ 0x38a5ffff,
+ 0x38c60000,
+ 0x43010111,
+ 0xa0451000,
+ 0x38840118,
+ 0x3c210018,
+ 0x38e700e4,
+ 0xa0260800,
+ 0xb8411000,
+ 0x58620000,
+ 0x28830000,
+ 0x3402fbff,
+ 0x43010112,
+ 0xa0621800,
+ 0x3c21000a,
+ 0x20210400,
+ 0xb8611800,
+ 0x58830000,
+ 0x43010110,
+ 0x202100ff,
+ 0x58e10000,
+ 0xe0000018,
+ 0x43010110,
+ 0x38e700e4,
+ 0x386301c8,
+ 0x202100ff,
+ 0x58e10000,
+ 0x28620000,
+ 0x38a5ffff,
+ 0x38c60000,
+ 0x43010111,
+ 0xa0451000,
+ 0x38840118,
+ 0x3c210018,
+ 0xa0260800,
+ 0xb8411000,
+ 0x58620000,
+ 0x28830000,
+ 0x3402fbff,
+ 0x43010112,
+ 0xa0621800,
+ 0x3c21000a,
+ 0x20210400,
+ 0xb8611800,
+ 0x58830000,
+ 0x34010000,
+ 0x330100f8,
+ 0xe0000006,
+ 0x78010003,
+ 0x3821f000,
+ 0x402102eb,
+ 0xfbffff1e,
+ 0xe0000007,
+ 0x430100f8,
+ 0x202100ff,
+ 0x44200003,
+ 0xfbffff3d,
+ 0xe0000002,
+ 0x33010769,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x78010003,
+ 0x3821f900,
+ 0x28210008,
+ 0x78060003,
+ 0x78070003,
+ 0x78050003,
+ 0x78040002,
+ 0x78030003,
+ 0x38c68ba8,
+ 0x38e7f000,
+ 0x38a58b24,
+ 0x3884714c,
+ 0x34080001,
+ 0x34020000,
+ 0x38638b88,
+ 0x20210080,
+ 0x4422000b,
+ 0x40e702ef,
+ 0x58a4003c,
+ 0x30c80028,
+ 0x30c7000f,
+ 0x330200f5,
+ 0x33020769,
+ 0x58620010,
+ 0x330200f8,
+ 0x330800f7,
+ 0xc3a00000,
+ 0x330100f7,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b8e0004,
+ 0x430100f7,
+ 0x7807c050,
+ 0x780ac050,
+ 0x78080700,
+ 0x780bc050,
+ 0x78040003,
+ 0x780d0003,
+ 0x78090003,
+ 0x78050002,
+ 0x78060003,
+ 0x78030003,
+ 0x780c0003,
+ 0x38e700e4,
+ 0x394a01c8,
+ 0x39080000,
+ 0x396b0118,
+ 0x38848ba8,
+ 0x39adf000,
+ 0x39298b24,
+ 0x38a5714c,
+ 0x340e0001,
+ 0x38c68b88,
+ 0x3863f818,
+ 0x398cf900,
+ 0x202200ff,
+ 0x5c40001a,
+ 0x28e10000,
+ 0x2021007f,
+ 0x33010110,
+ 0x29410000,
+ 0xa0280800,
+ 0x00210018,
+ 0x33010111,
+ 0x29610000,
+ 0x20210400,
+ 0x0021000a,
+ 0x33010112,
+ 0x41ad02ef,
+ 0x308e0028,
+ 0x5925003c,
+ 0x308d000f,
+ 0x330200f5,
+ 0x33020769,
+ 0x58c20010,
+ 0x330200f8,
+ 0x330e00f7,
+ 0x28610000,
+ 0x38210040,
+ 0x58610000,
+ 0x2b010108,
+ 0x31810029,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b8e0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x34010000,
+ 0x78030003,
+ 0x330100f7,
+ 0x3863f818,
+ 0x28610000,
+ 0x3402ffbf,
+ 0xa0220800,
+ 0x58610000,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x40230007,
+ 0xb8206000,
+ 0x20650008,
+ 0x44a00011,
+ 0x7803c050,
+ 0x386301c8,
+ 0x28610000,
+ 0x3402fff8,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x38840118,
+ 0x28810000,
+ 0x7802c050,
+ 0x384200ac,
+ 0x38210001,
+ 0x58810000,
+ 0x34010000,
+ 0x58410000,
+ 0xe0000014,
+ 0x20610002,
+ 0x780bc050,
+ 0x44200014,
+ 0x7804c050,
+ 0x388401c8,
+ 0x28810000,
+ 0x3402fff8,
+ 0x20630007,
+ 0xa0220800,
+ 0xb8230800,
+ 0x7803c050,
+ 0x58810000,
+ 0x38630118,
+ 0x28610000,
+ 0x3402fffe,
+ 0x396b00ac,
+ 0xa0220800,
+ 0x58610000,
+ 0x59650000,
+ 0x34010001,
+ 0x3301091a,
+ 0xe0000017,
+ 0x3301091a,
+ 0xf8001489,
+ 0x41810006,
+ 0x396b00ac,
+ 0x7802c050,
+ 0x59610000,
+ 0x384200b0,
+ 0x28410000,
+ 0x20210001,
+ 0x4420fffe,
+ 0x7803c050,
+ 0x38630118,
+ 0x28610000,
+ 0x3402fffe,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x388401c8,
+ 0x28810000,
+ 0x3402fff8,
+ 0xa0220800,
+ 0x58810000,
+ 0x298c0000,
+ 0x78010003,
+ 0x38218b88,
+ 0x582c0018,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x2f02073c,
+ 0x78030003,
+ 0x3863f1c8,
+ 0x2f010756,
+ 0x34040000,
+ 0x54220020,
+ 0x430200a8,
+ 0x204200ff,
+ 0x3c410001,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4230800,
+ 0xfbffffa5,
+ 0x430300a8,
+ 0x78020003,
+ 0x78010002,
+ 0x330300a7,
+ 0x38428b24,
+ 0x382179d0,
+ 0x58410034,
+ 0x430100a5,
+ 0x7805e000,
+ 0x38a53028,
+ 0x330100a6,
+ 0x28a40000,
+ 0x7802fffc,
+ 0x78030003,
+ 0x430100a7,
+ 0x38427fff,
+ 0x38638000,
+ 0x202100ff,
+ 0x3c21000f,
+ 0xa0822000,
+ 0xa0230800,
+ 0xb8812000,
+ 0x58a40000,
+ 0x34040001,
+ 0xb8800800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x7806e000,
+ 0x38c63028,
+ 0x28c50000,
+ 0x202100ff,
+ 0x3c24000c,
+ 0x34028fff,
+ 0x20847000,
+ 0x3c230001,
+ 0xa0a22800,
+ 0xb8a42800,
+ 0x58c50000,
+ 0xb4611800,
+ 0x330100a8,
+ 0x3c630002,
+ 0x78020003,
+ 0x3842f1c8,
+ 0x34010001,
+ 0xb4621800,
+ 0x33010767,
+ 0x2c610004,
+ 0x34020007,
+ 0xf8000cbe,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x38217548,
+ 0x58410034,
+ 0xfbffffb8,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x78080003,
+ 0xb9001000,
+ 0x3842f000,
+ 0x4042004f,
+ 0x34050000,
+ 0xb8203800,
+ 0xb8a02000,
+ 0x50a20015,
+ 0x34090001,
+ 0x2b0100bc,
+ 0xbd241000,
+ 0xb9003000,
+ 0x38c6f000,
+ 0x34830001,
+ 0xa0220800,
+ 0x44200002,
+ 0xb8802800,
+ 0x3ca10001,
+ 0x206400ff,
+ 0xb4250800,
+ 0x3c210002,
+ 0xb4260800,
+ 0x282101c8,
+ 0x54e10002,
+ 0xe0000004,
+ 0x40c1004f,
+ 0x50810002,
+ 0xe3ffffee,
+ 0xb8a00800,
+ 0xc3a00000,
+ 0x78020003,
+ 0x3842f000,
+ 0x4043004f,
+ 0x34040000,
+ 0x34020001,
+ 0xbc411000,
+ 0x48610002,
+ 0xe0000004,
+ 0x2b0100bc,
+ 0xa0220800,
+ 0x7c240000,
+ 0xb8800800,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x780c0003,
+ 0x430100a7,
+ 0xb9801000,
+ 0x3842f000,
+ 0x4042004f,
+ 0x34210001,
+ 0x202b00ff,
+ 0x5162000d,
+ 0xb9600800,
+ 0xfbffffe6,
+ 0xb9801800,
+ 0x3863f000,
+ 0x35620001,
+ 0x44200003,
+ 0xb9600800,
+ 0xe0000007,
+ 0x4061004f,
+ 0x204b00ff,
+ 0x51610002,
+ 0xe3fffff5,
+ 0x430100a7,
+ 0x202100ff,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x430100a7,
+ 0x202100ff,
+ 0x342bffff,
+ 0x34010000,
+ 0x482b0008,
+ 0xb9600800,
+ 0xfbffffcb,
+ 0x44200003,
+ 0x216100ff,
+ 0xe0000005,
+ 0x356bffff,
+ 0xe3fffff9,
+ 0x430100a7,
+ 0x202100ff,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x78020003,
+ 0x3842f000,
+ 0x4043004f,
+ 0x34040000,
+ 0xb8203800,
+ 0xb8802800,
+ 0x4c83000f,
+ 0xb8603000,
+ 0x344301c8,
+ 0x34080001,
+ 0x2b0100bc,
+ 0xbd051000,
+ 0x34a50001,
+ 0xa0220800,
+ 0x44200004,
+ 0x28640000,
+ 0x54e40002,
+ 0xe0000004,
+ 0x3463000c,
+ 0x4ca60002,
+ 0xe3fffff6,
+ 0xb8800800,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x430100aa,
+ 0x340b0000,
+ 0x442b0017,
+ 0x78010003,
+ 0x330b00aa,
+ 0x38218b88,
+ 0x28220018,
+ 0x2b0100b8,
+ 0x5c410011,
+ 0x430300a7,
+ 0x34010001,
+ 0x2b0200bc,
+ 0xbc230800,
+ 0xa0411000,
+ 0x5c4b000b,
+ 0xfbffffa3,
+ 0xb8205800,
+ 0x430100a7,
+ 0x202100ff,
+ 0x5c2b0003,
+ 0xfbffffbd,
+ 0xb8205800,
+ 0x430100a7,
+ 0x202100ff,
+ 0x5c2b002f,
+ 0x430100ab,
+ 0x5c20000c,
+ 0x78010003,
+ 0x38218b88,
+ 0x28220018,
+ 0x2b0100b8,
+ 0x4441002e,
+ 0x2b0100b8,
+ 0xfbffff66,
+ 0x430200a7,
+ 0x204200ff,
+ 0x44410029,
+ 0xe0000023,
+ 0x2f0100c4,
+ 0x5c200023,
+ 0x430100ab,
+ 0x7c210001,
+ 0x5c20000a,
+ 0xfbffff87,
+ 0xb8205800,
+ 0x430100a7,
+ 0x202100ff,
+ 0x5c2b0011,
+ 0x34010002,
+ 0x330100ab,
+ 0xfbffff9f,
+ 0xe000000c,
+ 0x430100ab,
+ 0x7c210002,
+ 0x5c20000a,
+ 0xfbffff9a,
+ 0xb8205800,
+ 0x430100a7,
+ 0x202100ff,
+ 0x5c2b0005,
+ 0x34010001,
+ 0x330100ab,
+ 0xfbffff74,
+ 0xb8205800,
+ 0x2f0100c0,
+ 0x2f0200c2,
+ 0x2021ffff,
+ 0x2042ffff,
+ 0xfbffeaae,
+ 0x3421ffff,
+ 0x0f0100c4,
+ 0xb9600800,
+ 0xfbffff1e,
+ 0xe0000005,
+ 0x2f0100c4,
+ 0x3421ffff,
+ 0x0f0100c4,
+ 0x34010001,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x2f0100c0,
+ 0x34020000,
+ 0x34030001,
+ 0x44220003,
+ 0x0f0200c4,
+ 0x330300ab,
+ 0xc3a00000,
+ 0x34010000,
+ 0x330100ab,
+ 0x0f0100c0,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x430200a5,
+ 0x430100a6,
+ 0x44220039,
+ 0x430100a5,
+ 0x5c200032,
+ 0x430100c8,
+ 0x7804c050,
+ 0x7805c050,
+ 0x7806c050,
+ 0x5c200016,
+ 0x388401c8,
+ 0x28830000,
+ 0x3402fff8,
+ 0x38a50118,
+ 0x430100c6,
+ 0xa0621800,
+ 0x3402fffe,
+ 0x20210007,
+ 0xb8611800,
+ 0x58830000,
+ 0x28a30000,
+ 0x38c600ac,
+ 0x430100c7,
+ 0xa0621800,
+ 0x20210001,
+ 0xb8611800,
+ 0x58a30000,
+ 0x430100c8,
+ 0x202100ff,
+ 0x58c10000,
+ 0xe0000015,
+ 0x430100c8,
+ 0x38c600ac,
+ 0x388401c8,
+ 0x202100ff,
+ 0x58c10000,
+ 0x28830000,
+ 0x3402fff8,
+ 0x38a50118,
+ 0x430100c6,
+ 0xa0621800,
+ 0x20210007,
+ 0xb8611800,
+ 0x58830000,
+ 0x28a10000,
+ 0x3403fffe,
+ 0x430200c7,
+ 0xa0230800,
+ 0x20420001,
+ 0xb8220800,
+ 0x58a10000,
+ 0x34010000,
+ 0x330100a6,
+ 0xe0000006,
+ 0x78010003,
+ 0x3821f000,
+ 0x402102e9,
+ 0xfbfffece,
+ 0xe0000007,
+ 0x430100a6,
+ 0x202100ff,
+ 0x44200003,
+ 0xfbffff60,
+ 0xe0000002,
+ 0x33010767,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x78010003,
+ 0x3821f900,
+ 0x28210008,
+ 0x78050003,
+ 0x78060003,
+ 0x78040003,
+ 0x78020002,
+ 0x78070003,
+ 0x38c6f000,
+ 0x38a58ba8,
+ 0x38848b24,
+ 0x384279d0,
+ 0x34030001,
+ 0x34080000,
+ 0x38e78b88,
+ 0x20210020,
+ 0x44280011,
+ 0x40c102ed,
+ 0x30a30026,
+ 0x58820034,
+ 0x30a1000d,
+ 0x33030767,
+ 0x330800a6,
+ 0x40c202e9,
+ 0xbc430800,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4260800,
+ 0x282101c8,
+ 0x5b0100b8,
+ 0x58e80018,
+ 0x330300a5,
+ 0xc3a00000,
+ 0x330100a5,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b8d0004,
+ 0x430100a5,
+ 0x7806c050,
+ 0x7809c050,
+ 0x780ac050,
+ 0x78020003,
+ 0x78040003,
+ 0x78070003,
+ 0x78050002,
+ 0x780b0003,
+ 0x78080003,
+ 0x780c0003,
+ 0x38c601c8,
+ 0x39290118,
+ 0x394a00ac,
+ 0x3884f000,
+ 0x38428ba8,
+ 0x38e78b24,
+ 0x38a579d0,
+ 0x340d0001,
+ 0x396b8b88,
+ 0x3908f818,
+ 0x398cf900,
+ 0x202300ff,
+ 0x5c60001d,
+ 0x28c10000,
+ 0x20210007,
+ 0x330100c6,
+ 0x29210000,
+ 0xa02d0800,
+ 0x330100c7,
+ 0x29410000,
+ 0x2021007f,
+ 0x330100c8,
+ 0x408102ed,
+ 0x304d0026,
+ 0x58e50034,
+ 0x3041000d,
+ 0x330300a6,
+ 0x408202e9,
+ 0xbc4d0800,
+ 0xb4220800,
+ 0x3c210002,
+ 0xb4240800,
+ 0x282101c8,
+ 0x5b0100b8,
+ 0x59630018,
+ 0x330d00a5,
+ 0x29010000,
+ 0x38210010,
+ 0x59010000,
+ 0x2b0100bc,
+ 0x3181002b,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b8d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x34010000,
+ 0x78030003,
+ 0x330100a5,
+ 0x3863f818,
+ 0x28610000,
+ 0x3402ffef,
+ 0xa0220800,
+ 0x58610000,
+ 0xc3a00000,
+ 0x430100d0,
+ 0x34020000,
+ 0x44220002,
+ 0x2b0200d8,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xfbfffff8,
+ 0xb8201000,
+ 0x430100a4,
+ 0x44200008,
+ 0x2b0100ac,
+ 0x50220002,
+ 0xb8400800,
+ 0x2b0300b0,
+ 0x50610002,
+ 0xb8201800,
+ 0xb8601000,
+ 0x43010084,
+ 0x44200005,
+ 0x2b010090,
+ 0x50220002,
+ 0xb8400800,
+ 0xb8201000,
+ 0x430100f4,
+ 0x44200005,
+ 0x2b010100,
+ 0x50220002,
+ 0xb8400800,
+ 0xb8201000,
+ 0xb8400800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x430100a4,
+ 0x34020000,
+ 0x44220002,
+ 0x2b0200b8,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x430100d0,
+ 0x34020000,
+ 0x44220002,
+ 0x2b0200e0,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x430100f4,
+ 0x34020000,
+ 0x44220002,
+ 0x2b020104,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x3821029c,
+ 0x28210000,
+ 0x20210004,
+ 0x64210000,
+ 0xc3a00000,
+ 0x3801f6bc,
+ 0xb7210800,
+ 0x28210000,
+ 0x00210001,
+ 0x20210001,
+ 0xc3a00000,
+ 0x3c210008,
+ 0x20420003,
+ 0x20210300,
+ 0xb8411000,
+ 0x3801ef58,
+ 0xb7210800,
+ 0x58220000,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x38210304,
+ 0x28210000,
+ 0x78020001,
+ 0x38420000,
+ 0xa0220800,
+ 0x00210010,
+ 0x7c210000,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x34010001,
+ 0xb8201000,
+ 0xfbffffeb,
+ 0x34010002,
+ 0x33010085,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x78020003,
+ 0x3842f900,
+ 0x2842000c,
+ 0xb8206000,
+ 0x34030000,
+ 0x204b0200,
+ 0x5d63000f,
+ 0xfbffffce,
+ 0xb8201800,
+ 0x5c200003,
+ 0x33010085,
+ 0xe000000a,
+ 0x2b010090,
+ 0xb9601800,
+ 0x542c0002,
+ 0xe0000006,
+ 0xfbffffcb,
+ 0x34030001,
+ 0x5c200003,
+ 0x33010085,
+ 0xb8201800,
+ 0xb8600800,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x3821f900,
+ 0x2821000c,
+ 0x34020000,
+ 0x20210100,
+ 0xb8205800,
+ 0x5c220007,
+ 0xfbffffb0,
+ 0x44200004,
+ 0xfbffffb4,
+ 0x44200002,
+ 0x340b0001,
+ 0xb9601000,
+ 0xb8400800,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x43010085,
+ 0x34020000,
+ 0x5c220005,
+ 0xfbffffb4,
+ 0xb8201000,
+ 0x44200002,
+ 0x34020001,
+ 0xb8400800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x34010000,
+ 0x34020001,
+ 0xfbffffa0,
+ 0x34010001,
+ 0x33010085,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xfbffff8c,
+ 0x34020002,
+ 0x44200003,
+ 0x34010000,
+ 0xfbffff94,
+ 0x34010000,
+ 0x33010085,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xfbffff80,
+ 0x34020002,
+ 0x44200003,
+ 0x34010001,
+ 0xfbffff88,
+ 0x34010000,
+ 0x33010085,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xfbffff74,
+ 0xb8201000,
+ 0x44200008,
+ 0xfbffff77,
+ 0xb8201000,
+ 0x44200005,
+ 0xfbffff82,
+ 0x64210000,
+ 0xc8010800,
+ 0x38220001,
+ 0xb8400800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x3821029c,
+ 0x28210000,
+ 0x20210002,
+ 0x64210000,
+ 0xc3a00000,
+ 0x78010002,
+ 0x38210004,
+ 0xb7210800,
+ 0x28210000,
+ 0x00210001,
+ 0x20210001,
+ 0xc3a00000,
+ 0x3c210008,
+ 0x78030002,
+ 0x20210300,
+ 0x20420003,
+ 0xb8411000,
+ 0x386315b4,
+ 0xb7230800,
+ 0x58220000,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x38210304,
+ 0x28210000,
+ 0x78020002,
+ 0x38420000,
+ 0xa0220800,
+ 0x00210011,
+ 0x7c210000,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x34010001,
+ 0xb8201000,
+ 0xfbffffea,
+ 0x34010002,
+ 0x330100a9,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x78020003,
+ 0x3842f900,
+ 0x2843000c,
+ 0xb8206000,
+ 0x78020002,
+ 0x38420000,
+ 0xa0625800,
+ 0x34020000,
+ 0x5d62000f,
+ 0xfbffffca,
+ 0xb8201000,
+ 0x5c200003,
+ 0x330100a9,
+ 0xe000000a,
+ 0x2b0100ac,
+ 0xb9601000,
+ 0x542c0002,
+ 0xe0000006,
+ 0xfbffffc7,
+ 0x34020001,
+ 0x5c200003,
+ 0x330100a9,
+ 0xb8201000,
+ 0xb8400800,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x3821f900,
+ 0x2822000c,
+ 0x78010001,
+ 0x38210000,
+ 0xa0411000,
+ 0xb8405800,
+ 0x34010000,
+ 0x5c410007,
+ 0xfbffffaa,
+ 0x44200004,
+ 0xfbffffae,
+ 0x44200002,
+ 0x340b0001,
+ 0xb9600800,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x430100a9,
+ 0x34020000,
+ 0x5c220005,
+ 0xfbffffb1,
+ 0xb8201000,
+ 0x44200002,
+ 0x34020001,
+ 0xb8400800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x34010000,
+ 0x34020001,
+ 0xfbffff9c,
+ 0x34010001,
+ 0x330100a9,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xfbffff87,
+ 0x34020002,
+ 0x44200003,
+ 0x34010000,
+ 0xfbffff90,
+ 0x34010000,
+ 0x330100a9,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xfbffff7b,
+ 0x34020002,
+ 0x44200003,
+ 0x34010001,
+ 0xfbffff84,
+ 0x34010000,
+ 0x330100a9,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xfbffff6f,
+ 0xb8201000,
+ 0x44200008,
+ 0xfbffff72,
+ 0xb8201000,
+ 0x44200005,
+ 0xfbffff7f,
+ 0x64210000,
+ 0xc8010800,
+ 0x38220001,
+ 0xb8400800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x78010003,
+ 0x78040003,
+ 0x34020003,
+ 0x38848e34,
+ 0x38218e30,
+ 0x7803c020,
+ 0x58820000,
+ 0x58220000,
+ 0x38630264,
+ 0x28610000,
+ 0xb8220800,
+ 0x58610000,
+ 0x28810000,
+ 0x28620000,
+ 0xa4200800,
+ 0xa0411000,
+ 0x58620000,
+ 0xc3a00000,
+ 0x78030003,
+ 0x3863f800,
+ 0x28620000,
+ 0x78010100,
+ 0x38210000,
+ 0xb4411000,
+ 0x58620000,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0xb8202000,
+ 0x78018000,
+ 0x38210428,
+ 0x78050003,
+ 0x74830184,
+ 0x58240000,
+ 0xb8406000,
+ 0x38a5fa04,
+ 0x5c60035c,
+ 0x3c810002,
+ 0x78020003,
+ 0x38427df4,
+ 0xb4220800,
+ 0x28210000,
+ 0xc0200000,
+ 0x34030000,
+ 0xe0000357,
+ 0x340300fe,
+ 0xe0000355,
+ 0x340300fe,
+ 0xe0000353,
+ 0x340300fe,
+ 0xe0000351,
+ 0x340300fe,
+ 0xe000034f,
+ 0x340300fe,
+ 0xe000034d,
+ 0x340300fe,
+ 0xe000034b,
+ 0x340300fe,
+ 0xe0000349,
+ 0x340300fe,
+ 0xe0000347,
+ 0x340300fe,
+ 0xe0000345,
+ 0x340300fe,
+ 0xe0000343,
+ 0x340300fe,
+ 0xe0000341,
+ 0x340300fe,
+ 0xe000033f,
+ 0x430106ee,
+ 0x340300ff,
+ 0x4420033c,
+ 0x34010000,
+ 0x78030003,
+ 0x330106f0,
+ 0x3863f818,
+ 0x28620000,
+ 0x7801fffb,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x58620000,
+ 0x34030000,
+ 0xe0000331,
+ 0x340300fe,
+ 0xe000032f,
+ 0x340300fe,
+ 0xe000032d,
+ 0xf8001005,
+ 0x34030000,
+ 0xe000032a,
+ 0xf800101a,
+ 0x34030000,
+ 0xe0000327,
+ 0x78030003,
+ 0x38638c00,
+ 0x2ca20002,
+ 0x2c61003e,
+ 0x48220003,
+ 0x406100ab,
+ 0x5c20031f,
+ 0xf8000c7a,
+ 0xe000031d,
+ 0x78030003,
+ 0x38638c00,
+ 0x2ca20002,
+ 0x2c61003e,
+ 0x48220003,
+ 0x406100ab,
+ 0x5c200316,
+ 0xf8000bc0,
+ 0xe0000314,
+ 0x340300fe,
+ 0xe0000313,
+ 0x340300fe,
+ 0xe0000311,
+ 0x340300fe,
+ 0xe000030f,
+ 0x340300fe,
+ 0xe000030d,
+ 0x34010001,
+ 0xe0000002,
+ 0x34010000,
+ 0x33010114,
+ 0xe0000307,
+ 0x5b0c0118,
+ 0xe0000305,
+ 0x34010000,
+ 0xe0000002,
+ 0x34010001,
+ 0x33010079,
+ 0xe0000300,
+ 0xf8001dd7,
+ 0xe00002fe,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34020001,
+ 0x3302082c,
+ 0x7801c201,
+ 0x33020774,
+ 0x3821c588,
+ 0xf800161a,
+ 0x38220003,
+ 0x7801c201,
+ 0x3821c588,
+ 0xf80015fc,
+ 0xf8001d74,
+ 0xd00b0000,
+ 0xe00002ee,
+ 0xf8001e3d,
+ 0xe00002ec,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34020001,
+ 0x3302082c,
+ 0x7801c201,
+ 0x33020774,
+ 0x3821c588,
+ 0xf8001608,
+ 0x38220003,
+ 0x7801c201,
+ 0x3821c588,
+ 0xf80015ea,
+ 0xf8001df1,
+ 0xd00b0000,
+ 0xe00002dc,
+ 0xf8001d32,
+ 0xe00002da,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf8001cf1,
+ 0xd00b0000,
+ 0xe00002d4,
+ 0xf8001e65,
+ 0xe00002d2,
+ 0xf8001e54,
+ 0xe00002d0,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf8001e70,
+ 0xd00b0000,
+ 0xe00002ca,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf8001e69,
+ 0xd00b0000,
+ 0xe00002c4,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xf8001018,
+ 0xd00b0000,
+ 0xe00002bd,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf8001012,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe00002b7,
+ 0x340300fe,
+ 0xe00002b5,
+ 0x340300fe,
+ 0xe00002b3,
+ 0x340300fe,
+ 0xe00002b1,
+ 0x340300fe,
+ 0xe00002af,
+ 0x340300fe,
+ 0xe00002ad,
+ 0x340300fe,
+ 0xe00002ab,
+ 0x340300fe,
+ 0xe00002a9,
+ 0x340300fe,
+ 0xe00002a7,
+ 0x340300fe,
+ 0xe00002a5,
+ 0x340300fe,
+ 0xe00002a3,
+ 0x340300fe,
+ 0xe00002a1,
+ 0x340300fe,
+ 0xe000029f,
+ 0x340300fe,
+ 0xe000029d,
+ 0x340300fe,
+ 0xe000029b,
+ 0x340300fe,
+ 0xe0000299,
+ 0x340300fe,
+ 0xe0000297,
+ 0x340300fe,
+ 0xe0000295,
+ 0x340300fe,
+ 0xe0000293,
+ 0x340300fe,
+ 0xe0000291,
+ 0x340300fe,
+ 0xe000028f,
+ 0x340300fe,
+ 0xe000028d,
+ 0x340300fe,
+ 0xe000028b,
+ 0x340300fe,
+ 0xe0000289,
+ 0x340300fe,
+ 0xe0000287,
+ 0x34010001,
+ 0xd0810000,
+ 0xe0000003,
+ 0x34010001,
+ 0xd0610000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xe000027c,
+ 0x340300fe,
+ 0xe000027b,
+ 0x340300fe,
+ 0xe0000279,
+ 0x340300fe,
+ 0xe0000277,
+ 0x340300fe,
+ 0xe0000275,
+ 0x340300fe,
+ 0xe0000273,
+ 0x340300fe,
+ 0xe0000271,
+ 0x340300fe,
+ 0xe000026f,
+ 0x340300fe,
+ 0xe000026d,
+ 0x340300fe,
+ 0xe000026b,
+ 0x340300fe,
+ 0xe0000269,
+ 0x78018000,
+ 0x38210068,
+ 0x35820001,
+ 0x58220000,
+ 0xe0000263,
+ 0x7d810000,
+ 0x33010760,
+ 0xe0000260,
+ 0xfbffe739,
+ 0xfbffe9dc,
+ 0xfbfff202,
+ 0xfbfff81e,
+ 0xfbfffa8e,
+ 0xfbfffcae,
+ 0x34030001,
+ 0xe0000259,
+ 0xfbffe966,
+ 0xfbfff180,
+ 0xfbfff81e,
+ 0xfbfffa8e,
+ 0xfbfffcae,
+ 0x34030001,
+ 0xe0000252,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbffef8e,
+ 0x34030000,
+ 0xe0000249,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbffefab,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe000023c,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbffeff4,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe000022f,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfff5b4,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe0000222,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfff5c1,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe0000215,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfff5e8,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe0000208,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x78030003,
+ 0x38638b20,
+ 0x28610000,
+ 0x34070001,
+ 0x282200c4,
+ 0x3401ffff,
+ 0xbc220800,
+ 0xa4200800,
+ 0xa1810800,
+ 0x5c200004,
+ 0xd00b0000,
+ 0x340300ff,
+ 0xe00001f8,
+ 0x34040000,
+ 0x50820015,
+ 0xb8603000,
+ 0xb8802800,
+ 0x28c10000,
+ 0x81841000,
+ 0xb4a10800,
+ 0x40210000,
+ 0x20430001,
+ 0x44230007,
+ 0x34010001,
+ 0x330107c5,
+ 0x28c10000,
+ 0x34070000,
+ 0xb4a10800,
+ 0x30230000,
+ 0x28c10000,
+ 0x34840001,
+ 0x34a50014,
+ 0x282100c4,
+ 0x50810002,
+ 0xe3ffffef,
+ 0x78010003,
+ 0x3821f900,
+ 0x302c0026,
+ 0xd00b0000,
+ 0xb8e01800,
+ 0xe00001dc,
+ 0x78010003,
+ 0x38218b20,
+ 0x28210000,
+ 0x34050000,
+ 0xb8a02000,
+ 0x282200c4,
+ 0x50a2000a,
+ 0xb8401800,
+ 0xb8201000,
+ 0x40410000,
+ 0xbc240800,
+ 0x34420014,
+ 0xb8a12800,
+ 0x34840001,
+ 0x50830002,
+ 0xe3fffffa,
+ 0x78018000,
+ 0x38210068,
+ 0x58250000,
+ 0x34030001,
+ 0xe00001c7,
+ 0x01810010,
+ 0x0f0c07f0,
+ 0x0f0107f2,
+ 0x34030001,
+ 0xe00001c2,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x78030003,
+ 0x3863f000,
+ 0x4062004c,
+ 0x3401ffff,
+ 0x34070001,
+ 0xbc220800,
+ 0xa4200800,
+ 0xa1810800,
+ 0x5c200004,
+ 0xd00b0000,
+ 0x340300ff,
+ 0xe00001b3,
+ 0x5b0c072c,
+ 0x2b020730,
+ 0x34660060,
+ 0x34040000,
+ 0x2b01072c,
+ 0xb8412800,
+ 0x80a40800,
+ 0x40c20005,
+ 0x20230001,
+ 0x44430005,
+ 0x34010001,
+ 0x330106fd,
+ 0x30c30005,
+ 0x34070000,
+ 0x64610000,
+ 0x5c200002,
+ 0x33040734,
+ 0x34840001,
+ 0x74810007,
+ 0x34c6001c,
+ 0x4420fff2,
+ 0x78010003,
+ 0x3821f900,
+ 0x30250024,
+ 0xd00b0000,
+ 0xb8e01800,
+ 0xe0000198,
+ 0x2b02072c,
+ 0x78018000,
+ 0x38210068,
+ 0x58220000,
+ 0x34030001,
+ 0xe0000192,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0x330106ff,
+ 0x34010000,
+ 0x33010736,
+ 0xd00b0000,
+ 0x34030001,
+ 0xe0000188,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x330106ff,
+ 0x33010736,
+ 0x330106fe,
+ 0xd00b0000,
+ 0x34030001,
+ 0xe000017f,
+ 0x01810010,
+ 0x0f0c0728,
+ 0x0f01072a,
+ 0x34030001,
+ 0xe000017a,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfff7b8,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe000016d,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfff7c9,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe0000160,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfff806,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe0000153,
+ 0x78010003,
+ 0x3821f000,
+ 0x4022004e,
+ 0x340300ff,
+ 0x3401ffff,
+ 0xbc220800,
+ 0xa4200800,
+ 0xa1810800,
+ 0x4420014a,
+ 0x5b0c0094,
+ 0x43010088,
+ 0x34030001,
+ 0x44200146,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34020001,
+ 0x78010003,
+ 0x3302008c,
+ 0x3821f900,
+ 0x302c0028,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe000013b,
+ 0x2b020094,
+ 0x78018000,
+ 0x38210068,
+ 0x58220000,
+ 0x34030001,
+ 0xe0000135,
+ 0x01810010,
+ 0x0f0c0098,
+ 0x0f01009a,
+ 0x34030001,
+ 0xe0000130,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfff9b1,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe0000123,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfff9c1,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe0000116,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfff9f2,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe0000109,
+ 0x78010003,
+ 0x3821f000,
+ 0x40220051,
+ 0x340300ff,
+ 0x3401ffff,
+ 0xbc220800,
+ 0xa4200800,
+ 0xa1810800,
+ 0x44200100,
+ 0x5b0c0108,
+ 0x430100f7,
+ 0x34030001,
+ 0x442000fc,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34020001,
+ 0x78010003,
+ 0x330200fb,
+ 0x3821f900,
+ 0x302c0029,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe00000f1,
+ 0x2b020108,
+ 0x78018000,
+ 0x38210068,
+ 0x58220000,
+ 0x34030001,
+ 0xe00000eb,
+ 0x01810010,
+ 0x0f0c010c,
+ 0x0f01010e,
+ 0x34030001,
+ 0xe00000e6,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfffb80,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe00000d9,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfffb96,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe00000cc,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfffbc6,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe00000bf,
+ 0x78010003,
+ 0x3821f000,
+ 0x4022004f,
+ 0x340300ff,
+ 0x3401ffff,
+ 0xbc220800,
+ 0xa4200800,
+ 0xa1810800,
+ 0x442000b6,
+ 0x5b0c00bc,
+ 0x430100a5,
+ 0x34030001,
+ 0x442000b2,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34020001,
+ 0x78010003,
+ 0x330200aa,
+ 0x3821f900,
+ 0x302c002b,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe00000a7,
+ 0x2b0200bc,
+ 0x78018000,
+ 0x38210068,
+ 0x58220000,
+ 0x34030001,
+ 0xe00000a1,
+ 0x01810010,
+ 0x0f0c00c0,
+ 0x0f0100c2,
+ 0x34030001,
+ 0xe000009c,
+ 0x340300fe,
+ 0xe000009a,
+ 0x430106ee,
+ 0x340300ff,
+ 0x44200097,
+ 0x218100ff,
+ 0xfbffe75d,
+ 0x340300ff,
+ 0x44200093,
+ 0x34010001,
+ 0x330106f0,
+ 0x78040003,
+ 0x330c06f1,
+ 0x3884f818,
+ 0x28830000,
+ 0x7801fffb,
+ 0x3821ffff,
+ 0x78020004,
+ 0xa0611800,
+ 0x38420000,
+ 0xb8621800,
+ 0x58830000,
+ 0x34030000,
+ 0xe0000084,
+ 0x340300fe,
+ 0xe0000082,
+ 0x340300fe,
+ 0xe0000080,
+ 0x340300fe,
+ 0xe000007e,
+ 0x340300fe,
+ 0xe000007c,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x45800007,
+ 0x0f0c074e,
+ 0x34010001,
+ 0x33010763,
+ 0xd00b0000,
+ 0x34030000,
+ 0xe0000072,
+ 0x330c0763,
+ 0xd00b0000,
+ 0xe000006e,
+ 0x78019800,
+ 0x38210000,
+ 0x34020000,
+ 0x58410000,
+ 0xfbffe268,
+ 0x78018000,
+ 0x38218000,
+ 0x3402ffff,
+ 0x58220050,
+ 0x7803e000,
+ 0x58220054,
+ 0x386330a4,
+ 0x28610000,
+ 0x3402ffef,
+ 0xa0220800,
+ 0x58610000,
+ 0xe000005d,
+ 0x340300fe,
+ 0xe000005c,
+ 0x340300fe,
+ 0xe000005a,
+ 0x340300fe,
+ 0xe0000058,
+ 0x340300fe,
+ 0xe0000056,
+ 0x340300fe,
+ 0xe0000054,
+ 0x340300fe,
+ 0xe0000052,
+ 0x340300fe,
+ 0xe0000050,
+ 0x340300fe,
+ 0xe000004e,
+ 0x340300fe,
+ 0xe000004c,
+ 0x340300fe,
+ 0xe000004a,
+ 0xf8001875,
+ 0xe0000047,
+ 0xf80018d2,
+ 0xe0000045,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x43010789,
+ 0x5c200002,
+ 0xf8001553,
+ 0xd00b0000,
+ 0xe000003d,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x4301078a,
+ 0x7c210001,
+ 0x5c200002,
+ 0xf80015a6,
+ 0xd00b0000,
+ 0xe0000034,
+ 0x43010789,
+ 0x202200ff,
+ 0x7c410001,
+ 0x5c200030,
+ 0x33020785,
+ 0x34030000,
+ 0xe000002e,
+ 0x43010789,
+ 0x202200ff,
+ 0x7c410001,
+ 0x5c200029,
+ 0x33020787,
+ 0x34030000,
+ 0xe0000027,
+ 0x43010789,
+ 0x7c210001,
+ 0x5c200023,
+ 0x34010000,
+ 0x33010785,
+ 0x33010787,
+ 0xb8201800,
+ 0xe000001f,
+ 0xf8002212,
+ 0xe000001c,
+ 0xf800224c,
+ 0xe000001a,
+ 0xf800225a,
+ 0xe0000018,
+ 0xf800228d,
+ 0xe0000016,
+ 0xf800243d,
+ 0xe0000014,
+ 0xf8002445,
+ 0xe0000012,
+ 0x218100ff,
+ 0xf8000e2f,
+ 0xe000000f,
+ 0xf8000e4d,
+ 0xe000000d,
+ 0x218100ff,
+ 0xf8000e64,
+ 0xe000000a,
+ 0xf8000e82,
+ 0xe0000008,
+ 0xf80018ef,
+ 0xe0000006,
+ 0x34010001,
+ 0x33010735,
+ 0xe0000003,
+ 0x340300fe,
+ 0xe0000002,
+ 0x34030001,
+ 0xb8600800,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0xb8201800,
+ 0x64210142,
+ 0xb8402000,
+ 0x5c2000aa,
+ 0x74610142,
+ 0x5c20002d,
+ 0x64610124,
+ 0x5c200094,
+ 0x74610124,
+ 0x5c200014,
+ 0x64610052,
+ 0x5c200081,
+ 0x74610052,
+ 0x5c200006,
+ 0x64610041,
+ 0x5c200077,
+ 0x64610051,
+ 0x5c200077,
+ 0xe00000a8,
+ 0x64610102,
+ 0x5c20003b,
+ 0x74610102,
+ 0x5c200004,
+ 0x64610063,
+ 0x5c200093,
+ 0xe00000a1,
+ 0x64610104,
+ 0x5c200060,
+ 0xe000009e,
+ 0x6461012c,
+ 0x5c200048,
+ 0x7461012c,
+ 0x5c20000b,
+ 0x64610129,
+ 0x5c20003b,
+ 0x74610129,
+ 0x5c200004,
+ 0x64610125,
+ 0x5c20006a,
+ 0xe0000093,
+ 0x6461012a,
+ 0x5c200046,
+ 0xe0000090,
+ 0x6461012e,
+ 0x5c200047,
+ 0x3401012e,
+ 0x54230033,
+ 0x64610130,
+ 0x5c20003a,
+ 0xe0000089,
+ 0x74610153,
+ 0x5c200010,
+ 0x70610152,
+ 0x5c200066,
+ 0x64610145,
+ 0x5c20001c,
+ 0x74610145,
+ 0x5c200006,
+ 0x64610143,
+ 0x5c200074,
+ 0x64610144,
+ 0x5c200078,
+ 0xe000007c,
+ 0x3461feb2,
+ 0x74210001,
+ 0x5c200079,
+ 0xe000000d,
+ 0x74610157,
+ 0x5c200004,
+ 0x70610156,
+ 0x5c200020,
+ 0xe0000016,
+ 0x3401015a,
+ 0x54230071,
+ 0x3401015b,
+ 0x50230024,
+ 0x6461015c,
+ 0x5c200053,
+ 0xe000006c,
+ 0x430206ee,
+ 0x34040001,
+ 0x430106ef,
+ 0xe000004c,
+ 0x430206e8,
+ 0x78030003,
+ 0x3863f000,
+ 0xb0401000,
+ 0x3c410003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb4230800,
+ 0x40210065,
+ 0xe0000055,
+ 0x43020088,
+ 0x34040001,
+ 0x43010089,
+ 0xe000003e,
+ 0x4303008a,
+ 0x34020001,
+ 0xb8402000,
+ 0x2b010094,
+ 0xe0000012,
+ 0x430200f7,
+ 0x34040001,
+ 0x430100f8,
+ 0xe0000035,
+ 0x430300f9,
+ 0x34020001,
+ 0xb8402000,
+ 0x2b010108,
+ 0xe0000009,
+ 0x430200a5,
+ 0x34040001,
+ 0x430100a6,
+ 0xe000002c,
+ 0x430300a7,
+ 0x34020001,
+ 0xb8402000,
+ 0x2b0100bc,
+ 0xbc431000,
+ 0xa0220800,
+ 0x5c200042,
+ 0xe0000040,
+ 0x7801c020,
+ 0x38210014,
+ 0x28220000,
+ 0x7801001f,
+ 0x38210000,
+ 0xa0411000,
+ 0x00420010,
+ 0x208100ff,
+ 0x5c410037,
+ 0x430106ef,
+ 0xe0000033,
+ 0x430106ef,
+ 0xe0000029,
+ 0x430106ac,
+ 0x34040001,
+ 0x7c21000a,
+ 0xe000002e,
+ 0x430106ac,
+ 0x34040001,
+ 0x7c210004,
+ 0xe000002a,
+ 0x90001000,
+ 0x34010000,
+ 0xd0010000,
+ 0x2f01073c,
+ 0x2021ffff,
+ 0x54810004,
+ 0xd0020000,
+ 0x34040001,
+ 0xe0000023,
+ 0xd0020000,
+ 0xe0000020,
+ 0x430207b6,
+ 0x34040001,
+ 0x430107b7,
+ 0x4422001d,
+ 0xe000001b,
+ 0x430307b0,
+ 0x78020003,
+ 0x38428b20,
+ 0xb0601800,
+ 0x3c610002,
+ 0x28420000,
+ 0xb4230800,
+ 0x3c210002,
+ 0xb4220800,
+ 0x40210000,
+ 0xe0000007,
+ 0x43010825,
+ 0xe000000c,
+ 0x43010786,
+ 0xe0000002,
+ 0x43010788,
+ 0x202100ff,
+ 0x7c220001,
+ 0xb8202000,
+ 0x44400008,
+ 0xe0000006,
+ 0x43010788,
+ 0x5c200004,
+ 0x43010786,
+ 0x34040001,
+ 0x44200002,
+ 0x34040000,
+ 0xb8800800,
+ 0xc3a00000,
+ 0xb8201000,
+ 0x64210001,
+ 0x34030000,
+ 0x5c230007,
+ 0x3441ff80,
+ 0x74210007,
+ 0x340300fe,
+ 0x4440000c,
+ 0x5c20000b,
+ 0xe0000003,
+ 0x0f0300cc,
+ 0xe0000007,
+ 0x78010003,
+ 0x38218408,
+ 0xb4421000,
+ 0xb4411000,
+ 0x2c41ff00,
+ 0x0f0100cc,
+ 0x34030001,
+ 0xb8600800,
+ 0xc3a00000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xb8202000,
+ 0x34010001,
+ 0x64830011,
+ 0x33010084,
+ 0x5c600020,
+ 0x74810011,
+ 0x5c200006,
+ 0x64810001,
+ 0x5c200009,
+ 0x64810010,
+ 0x5c20000f,
+ 0xe0000030,
+ 0x64810012,
+ 0x5c200022,
+ 0x64810013,
+ 0x5c20002e,
+ 0xe000002b,
+ 0x5b020090,
+ 0x430106ef,
+ 0x340200ff,
+ 0x7c210001,
+ 0x5c20002d,
+ 0xfbfffa21,
+ 0x5b0106f4,
+ 0xe0000021,
+ 0x43010088,
+ 0x340200ff,
+ 0x44200027,
+ 0x90001000,
+ 0x34010000,
+ 0xd0010000,
+ 0x33010087,
+ 0x34010002,
+ 0x33010086,
+ 0xd0020000,
+ 0xe0000016,
+ 0x43010088,
+ 0x340200ff,
+ 0x4420001c,
+ 0x90001000,
+ 0x34010000,
+ 0xd0010000,
+ 0x33010087,
+ 0x34010001,
+ 0x33010086,
+ 0xd0020000,
+ 0xe000000b,
+ 0x43010088,
+ 0x340200ff,
+ 0x44200011,
+ 0x90001000,
+ 0x34010000,
+ 0xd0010000,
+ 0x33010087,
+ 0x34010004,
+ 0x33010086,
+ 0xd0020000,
+ 0x34020000,
+ 0xe0000008,
+ 0x340200fe,
+ 0xe0000006,
+ 0xf80026cf,
+ 0x78028000,
+ 0x38420074,
+ 0x58410000,
+ 0x34020001,
+ 0xb8400800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0xb8201800,
+ 0x64210001,
+ 0x5c200006,
+ 0x44600013,
+ 0x3461fff0,
+ 0x74210002,
+ 0x5c200010,
+ 0xe0000007,
+ 0x78010003,
+ 0x38218b88,
+ 0x28210000,
+ 0x5441000b,
+ 0xb8601000,
+ 0xe000000a,
+ 0x43010088,
+ 0x340200ff,
+ 0x44200007,
+ 0x43010087,
+ 0x44200004,
+ 0x43010087,
+ 0x202200ff,
+ 0xe0000002,
+ 0x34020000,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0xb8202000,
+ 0x34010001,
+ 0x64830011,
+ 0x330100a4,
+ 0xb8405800,
+ 0x5c60002d,
+ 0x74810011,
+ 0x5c20000b,
+ 0x64810002,
+ 0x5c20001b,
+ 0x74810002,
+ 0x5c200004,
+ 0x64810001,
+ 0x5c20000f,
+ 0xe0000059,
+ 0x64810004,
+ 0x5c200016,
+ 0xe0000056,
+ 0x64810015,
+ 0x5c20002a,
+ 0x74810015,
+ 0x5c200004,
+ 0x64810014,
+ 0x5c20001f,
+ 0xe000004f,
+ 0x64810017,
+ 0x5c200034,
+ 0xe000004c,
+ 0x5b0200ac,
+ 0x430106ef,
+ 0x340200ff,
+ 0x7c210001,
+ 0x5c200048,
+ 0xfbfff9b4,
+ 0x5b0106f4,
+ 0xe0000008,
+ 0x5b0200b0,
+ 0xe0000006,
+ 0xb8400800,
+ 0xfbfff882,
+ 0xb8201800,
+ 0x55610004,
+ 0x5b0b00b8,
+ 0x34020000,
+ 0xe000003c,
+ 0x78018000,
+ 0x38210078,
+ 0x58230000,
+ 0x340200ff,
+ 0xe0000037,
+ 0x78010003,
+ 0x38218b88,
+ 0x28220000,
+ 0xe0000004,
+ 0x78010003,
+ 0x38218b88,
+ 0x28220018,
+ 0x78018000,
+ 0x38210078,
+ 0x58220000,
+ 0xe0000029,
+ 0x78020003,
+ 0x3842f000,
+ 0x4041004c,
+ 0x34030000,
+ 0xb8602000,
+ 0x50610020,
+ 0xb8202800,
+ 0x40410065,
+ 0x34840001,
+ 0x7c210001,
+ 0x5c200004,
+ 0x28410058,
+ 0x50610002,
+ 0xb8201800,
+ 0x3442001c,
+ 0x50850016,
+ 0xe3fffff7,
+ 0x78020003,
+ 0x3842f000,
+ 0x4041004f,
+ 0x34030000,
+ 0xb8602000,
+ 0x5061000f,
+ 0xb8203000,
+ 0x344501c8,
+ 0x34070001,
+ 0x2b0100bc,
+ 0xbce41000,
+ 0x34840001,
+ 0xa0220800,
+ 0x44200004,
+ 0x28a10000,
+ 0x50610002,
+ 0xb8201800,
+ 0x34a5000c,
+ 0x50860002,
+ 0xe3fffff6,
+ 0x78018000,
+ 0x38210078,
+ 0x58230000,
+ 0x34020001,
+ 0xe0000002,
+ 0x340200fe,
+ 0xb8400800,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0xb8201800,
+ 0x64210002,
+ 0x5c20000f,
+ 0x74610002,
+ 0x5c200004,
+ 0x64610001,
+ 0x5c200005,
+ 0xe0000015,
+ 0x64610004,
+ 0x5c20000c,
+ 0xe0000012,
+ 0x78010003,
+ 0x38218b88,
+ 0x28210000,
+ 0xf4411000,
+ 0xc8621000,
+ 0xe000000d,
+ 0x78010003,
+ 0x38218b88,
+ 0x28210000,
+ 0xe0000004,
+ 0x78010003,
+ 0x38218b88,
+ 0x28210018,
+ 0xf4411000,
+ 0x34010001,
+ 0xc8221000,
+ 0xe0000002,
+ 0x34020000,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x3423ffff,
+ 0xb8402000,
+ 0x74610006,
+ 0x340200fe,
+ 0x5c200048,
+ 0x3c610002,
+ 0x78020003,
+ 0x38428418,
+ 0xb4220800,
+ 0x28210000,
+ 0xc0200000,
+ 0x78018000,
+ 0x3821007c,
+ 0x34820001,
+ 0x58220000,
+ 0xe000003c,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf8001826,
+ 0x43010824,
+ 0x7c210001,
+ 0x5c200008,
+ 0x43010826,
+ 0x202200ff,
+ 0x7c410001,
+ 0x5c200004,
+ 0x34010000,
+ 0x33010826,
+ 0x3302082c,
+ 0x34010000,
+ 0x33010779,
+ 0xd00b0000,
+ 0xe000002a,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x43010824,
+ 0x202200ff,
+ 0x7c410001,
+ 0x5c20000d,
+ 0x43010826,
+ 0x5c20000b,
+ 0x33020826,
+ 0x3302082c,
+ 0x7801c201,
+ 0x33020774,
+ 0x3821c588,
+ 0xf8001127,
+ 0x38220003,
+ 0x7801c201,
+ 0x3821c588,
+ 0xf8001109,
+ 0x34010001,
+ 0x33010779,
+ 0x4301077b,
+ 0x5c200004,
+ 0xd00b0000,
+ 0x34020000,
+ 0xe0000011,
+ 0xd00b0000,
+ 0xe000000e,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf80017dd,
+ 0xd00b0000,
+ 0xe0000008,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf80017f2,
+ 0xd00b0000,
+ 0xe0000002,
+ 0xf80006ae,
+ 0x34020001,
+ 0xb8400800,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x64210006,
+ 0x4420000b,
+ 0x90001000,
+ 0x34010000,
+ 0xd0010000,
+ 0x4301077b,
+ 0x7c210001,
+ 0x5c200004,
+ 0xd0020000,
+ 0x34010001,
+ 0xc3a00000,
+ 0xd0020000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xb8202000,
+ 0x34010001,
+ 0x64830012,
+ 0x330100f4,
+ 0x5c600021,
+ 0x74810012,
+ 0x5c20000b,
+ 0x64810002,
+ 0x5c200017,
+ 0x74810002,
+ 0x5c200004,
+ 0x64810001,
+ 0x5c200011,
+ 0xe0000041,
+ 0x64810011,
+ 0x5c200012,
+ 0xe000003e,
+ 0x64810022,
+ 0x5c20001a,
+ 0x74810022,
+ 0x5c200004,
+ 0x64810014,
+ 0x5c20003a,
+ 0xe0000037,
+ 0x64810023,
+ 0x5c20001e,
+ 0x64810024,
+ 0x5c200027,
+ 0xe0000032,
+ 0x5b020100,
+ 0xe000002e,
+ 0x5b020104,
+ 0xe000002c,
+ 0x78010003,
+ 0x38218b88,
+ 0x28220000,
+ 0xe0000004,
+ 0x78010003,
+ 0x38218b88,
+ 0x28220010,
+ 0x78018000,
+ 0x38210084,
+ 0x58220000,
+ 0xe0000029,
+ 0x430100f7,
+ 0x340200ff,
+ 0x44200027,
+ 0x90001000,
+ 0x34010000,
+ 0xd0010000,
+ 0x330100f6,
+ 0x34010004,
+ 0x330100f5,
+ 0xd0020000,
+ 0xe0000016,
+ 0x430100f7,
+ 0x340200ff,
+ 0x4420001c,
+ 0x90001000,
+ 0x34010000,
+ 0xd0010000,
+ 0x330100f6,
+ 0x34010002,
+ 0x330100f5,
+ 0xd0020000,
+ 0xe000000b,
+ 0x430100f7,
+ 0x340200ff,
+ 0x44200011,
+ 0x90001000,
+ 0x34010000,
+ 0xd0010000,
+ 0x330100f6,
+ 0x34010001,
+ 0x330100f5,
+ 0xd0020000,
+ 0x34020000,
+ 0xe0000008,
+ 0x340200fe,
+ 0xe0000006,
+ 0xf800256a,
+ 0x78028000,
+ 0x38420084,
+ 0x58410000,
+ 0x34020001,
+ 0xb8400800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0xb8201800,
+ 0x64210002,
+ 0x5c200010,
+ 0x74610002,
+ 0x5c200004,
+ 0x64610001,
+ 0x5c200006,
+ 0xe000001c,
+ 0x3461ffde,
+ 0x74210002,
+ 0x5c200019,
+ 0xe000000e,
+ 0x78010003,
+ 0x38218b88,
+ 0x28210000,
+ 0xf4411000,
+ 0xc8621000,
+ 0xe0000013,
+ 0x78010003,
+ 0x38218b88,
+ 0x28210010,
+ 0xf4411000,
+ 0x34010001,
+ 0xc8221000,
+ 0xe000000c,
+ 0x430100f7,
+ 0x340200ff,
+ 0x44200009,
+ 0x430100f6,
+ 0x202100ff,
+ 0xb8201000,
+ 0x44200005,
+ 0x430100f6,
+ 0x202200ff,
+ 0xe0000002,
+ 0x34020000,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x3423ffff,
+ 0x78040003,
+ 0x74610059,
+ 0xb8406000,
+ 0x3884fa04,
+ 0x5c200195,
+ 0x3c610002,
+ 0x78020003,
+ 0x38428434,
+ 0xb4220800,
+ 0x28210000,
+ 0xc0200000,
+ 0xfbfff9d0,
+ 0xe000018f,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf8001e51,
+ 0xd00b0000,
+ 0xe0000189,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf8001e72,
+ 0xd00b0000,
+ 0xe0000183,
+ 0x78010003,
+ 0x38218c00,
+ 0x402100ab,
+ 0x5c20017f,
+ 0x34010001,
+ 0xe0000005,
+ 0x78010003,
+ 0x38218c00,
+ 0x402100ab,
+ 0x5c200179,
+ 0x3301069b,
+ 0xf80014ac,
+ 0xe0000176,
+ 0x78010003,
+ 0x38218c00,
+ 0x402100ab,
+ 0x5c200172,
+ 0xf8001415,
+ 0xe0000170,
+ 0x78030003,
+ 0x38638c00,
+ 0x2c820002,
+ 0x2c61003e,
+ 0x48220003,
+ 0x406100ab,
+ 0x5c200169,
+ 0x34010001,
+ 0xf8001326,
+ 0xe0000166,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf8001a93,
+ 0xd00b0000,
+ 0xe0000160,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf8001aaf,
+ 0xd00b0000,
+ 0xe000015a,
+ 0x35810068,
+ 0x3c210007,
+ 0x78020003,
+ 0x5b01081c,
+ 0x38428c00,
+ 0x40410029,
+ 0x2b02081c,
+ 0x3c210007,
+ 0xc8411000,
+ 0x5b020820,
+ 0xe000014f,
+ 0x78030003,
+ 0x38638c00,
+ 0x2c820002,
+ 0x2c61003e,
+ 0x4822001e,
+ 0x406100ab,
+ 0x5c200148,
+ 0xe000001b,
+ 0x78030003,
+ 0x38638c00,
+ 0x2c820002,
+ 0x2c61003e,
+ 0x48220003,
+ 0x406100ab,
+ 0x5c200140,
+ 0x43010158,
+ 0x7c210001,
+ 0x5c20013d,
+ 0x34010000,
+ 0x33010158,
+ 0xb8201800,
+ 0xe000013a,
+ 0x78030003,
+ 0x38638c00,
+ 0x2c820002,
+ 0x2c61003e,
+ 0x48220003,
+ 0x406100ab,
+ 0x5c200132,
+ 0x78010003,
+ 0x3821f9d8,
+ 0x28210000,
+ 0x20220004,
+ 0x44400005,
+ 0x43010158,
+ 0x5c20012b,
+ 0xf800167a,
+ 0xe0000129,
+ 0x43010158,
+ 0x7c210001,
+ 0x5c200126,
+ 0x33020158,
+ 0xb8401800,
+ 0xe0000124,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x5b0c0730,
+ 0x430106ee,
+ 0x34070003,
+ 0xb8e01800,
+ 0x4420011c,
+ 0x2b010730,
+ 0x78020003,
+ 0x3842f000,
+ 0x2b03072c,
+ 0x34450060,
+ 0x34040000,
+ 0xb8233000,
+ 0x80c40800,
+ 0x40a20005,
+ 0x20230001,
+ 0x44430005,
+ 0x34010001,
+ 0x330106fd,
+ 0x30a30005,
+ 0x34070000,
+ 0x64610000,
+ 0x5c200002,
+ 0x33040734,
+ 0x34840001,
+ 0x74810007,
+ 0x34a5001c,
+ 0x4420fff2,
+ 0x78010003,
+ 0x3821f900,
+ 0x30260024,
+ 0xd00b0000,
+ 0xe000006d,
+ 0x2b020730,
+ 0x7801c210,
+ 0x3821003c,
+ 0x58220000,
+ 0xe00000fb,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfff036,
+ 0xe00000c6,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfff048,
+ 0xe00000be,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbfff074,
+ 0xe00000b6,
+ 0x430107b6,
+ 0x340300ff,
+ 0x442000e1,
+ 0x218100ff,
+ 0xfbffed4b,
+ 0x340300ff,
+ 0x442000dd,
+ 0x34010001,
+ 0x330107b8,
+ 0x78040003,
+ 0x330c07b9,
+ 0x3884f818,
+ 0x28830000,
+ 0x7801ffef,
+ 0x3821ffff,
+ 0x78020010,
+ 0xa0611800,
+ 0x38420000,
+ 0xb8621800,
+ 0x58830000,
+ 0xe00000a1,
+ 0x430107b6,
+ 0x340300ff,
+ 0x442000cc,
+ 0x34010000,
+ 0x78030003,
+ 0x330107b8,
+ 0x3863f818,
+ 0x28620000,
+ 0x7801ffef,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x58620000,
+ 0xe0000094,
+ 0x78040003,
+ 0xb8800800,
+ 0x38218b20,
+ 0x28210000,
+ 0x34070003,
+ 0x340300ff,
+ 0x282200c4,
+ 0x3401ffff,
+ 0xbc220800,
+ 0xa4200800,
+ 0xa1810800,
+ 0x442000b6,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xb8801000,
+ 0x38428b20,
+ 0x28410000,
+ 0x34040000,
+ 0x282100c4,
+ 0x50810015,
+ 0xb8403000,
+ 0xb8802800,
+ 0x28c10000,
+ 0x81841000,
+ 0xb4a10800,
+ 0x40210000,
+ 0x20430001,
+ 0x44230007,
+ 0x34010001,
+ 0x330107c5,
+ 0x28c10000,
+ 0x34070000,
+ 0xb4a10800,
+ 0x30230000,
+ 0x28c10000,
+ 0x34840001,
+ 0x34a50014,
+ 0x282100c4,
+ 0x50810002,
+ 0xe3ffffef,
+ 0x78010003,
+ 0x3821f900,
+ 0x302c0026,
+ 0xd00b0000,
+ 0xb8e01800,
+ 0xe0000093,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xf80002f0,
+ 0xd00b0000,
+ 0xe0000086,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xf8000305,
+ 0xd00b0000,
+ 0xe000007a,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x45800006,
+ 0x0f0c0750,
+ 0x34010001,
+ 0x33010764,
+ 0xd00b0000,
+ 0xe0000044,
+ 0x330c0764,
+ 0xd00b0000,
+ 0xe000006e,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x43010814,
+ 0x5c20000a,
+ 0x34010001,
+ 0xd0810000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbffeb11,
+ 0xd00b0000,
+ 0xe0000033,
+ 0xd00b0000,
+ 0xe000005e,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x43010814,
+ 0x202200ff,
+ 0x7c410001,
+ 0x5c200009,
+ 0xd0820000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0x34000000,
+ 0xfbffeb2a,
+ 0xd00b0000,
+ 0xe0000022,
+ 0xd00b0000,
+ 0xe000004d,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x3401001e,
+ 0xfbffdd9d,
+ 0xd00b0000,
+ 0xe0000046,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x3401001e,
+ 0xfbffddc3,
+ 0xd00b0000,
+ 0xe000003f,
+ 0x78010003,
+ 0x38218c00,
+ 0x402100ab,
+ 0x5c20003b,
+ 0x34010001,
+ 0x33010174,
+ 0xf8002126,
+ 0xe0000037,
+ 0x78010003,
+ 0x38218c00,
+ 0x402100ab,
+ 0x5c200033,
+ 0xf8002157,
+ 0xe0000031,
+ 0xf8000a75,
+ 0xe000002f,
+ 0xf8000a8d,
+ 0x34030000,
+ 0xe000002d,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xb9800800,
+ 0xf8001b46,
+ 0x5c200005,
+ 0x7801c210,
+ 0x3821003c,
+ 0x370201c4,
+ 0x58220000,
+ 0xd00b0000,
+ 0xe0000020,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf80019d2,
+ 0xd00b0000,
+ 0xe000001a,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0xf80019da,
+ 0xd00b0000,
+ 0xe0000014,
+ 0xf80032ac,
+ 0xe0000012,
+ 0xf8001be9,
+ 0x34010000,
+ 0xfbffe0cd,
+ 0xe000000e,
+ 0x7801c00c,
+ 0x38210000,
+ 0x28210000,
+ 0x20210002,
+ 0x5c200009,
+ 0x34010001,
+ 0xfbffe0c5,
+ 0xf8001c57,
+ 0xe0000005,
+ 0xf8001d07,
+ 0xe0000003,
+ 0x340300fe,
+ 0xe0000002,
+ 0x34030003,
+ 0xb8600800,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0xb8201800,
+ 0x74210028,
+ 0xb8402800,
+ 0x5c200017,
+ 0x70610026,
+ 0x34040003,
+ 0x5c200065,
+ 0x6461001c,
+ 0x5c200043,
+ 0x7461001c,
+ 0x5c20000b,
+ 0x64610009,
+ 0x5c20002c,
+ 0x74610009,
+ 0x5c200005,
+ 0x64610001,
+ 0x340400fe,
+ 0x5c20005a,
+ 0xe0000058,
+ 0x6461000e,
+ 0xe000000b,
+ 0x6461001d,
+ 0x5c200041,
+ 0x7461001f,
+ 0x5c200052,
+ 0xe000001f,
+ 0x74610039,
+ 0x5c200006,
+ 0x70610038,
+ 0x5c200043,
+ 0x6461002f,
+ 0x5c20000c,
+ 0xe000004a,
+ 0x6461004c,
+ 0x5c20001b,
+ 0x7461004c,
+ 0x5c200004,
+ 0x6461003a,
+ 0x5c200036,
+ 0xe0000043,
+ 0x64610058,
+ 0x5c200004,
+ 0xe0000040,
+ 0x43010159,
+ 0xe0000029,
+ 0x430206e8,
+ 0x78030003,
+ 0x3863f000,
+ 0xb0401000,
+ 0x3c410003,
+ 0x34040003,
+ 0xc8220800,
+ 0x3c210002,
+ 0xb4230800,
+ 0x40210065,
+ 0xe0000022,
+ 0x430207b6,
+ 0x34040003,
+ 0x430107b7,
+ 0x44220030,
+ 0xe000002e,
+ 0x430307b0,
+ 0x78020003,
+ 0x38428b20,
+ 0xb0601800,
+ 0x3c610002,
+ 0x28420000,
+ 0xb4230800,
+ 0x3c210002,
+ 0xb4220800,
+ 0x40210000,
+ 0x7c220001,
+ 0xb8202000,
+ 0x44400022,
+ 0xe0000020,
+ 0x7801c020,
+ 0x38210014,
+ 0x28220000,
+ 0x78011c00,
+ 0x38210000,
+ 0xa0411000,
+ 0x0042001a,
+ 0x20a100ff,
+ 0x5c410017,
+ 0x430107b7,
+ 0x34040003,
+ 0xe0000004,
+ 0x430107b7,
+ 0x34040003,
+ 0x7c210001,
+ 0x44200011,
+ 0xe000000f,
+ 0x2f01073c,
+ 0x2021ffff,
+ 0x5441000c,
+ 0xe0000008,
+ 0x90001800,
+ 0x34010000,
+ 0xd0010000,
+ 0x43020813,
+ 0x43010814,
+ 0x5c220004,
+ 0xd0030000,
+ 0x34040003,
+ 0xe0000003,
+ 0xd0030000,
+ 0x34040000,
+ 0xb8800800,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0xb8201800,
+ 0x6421016c,
+ 0x5c200022,
+ 0x7461016c,
+ 0x5c200007,
+ 0x64610001,
+ 0x5c200028,
+ 0x4460000b,
+ 0x64610125,
+ 0x5c20000e,
+ 0xe000003c,
+ 0x6461016e,
+ 0x5c20001d,
+ 0x3401016e,
+ 0x54230019,
+ 0x6461016f,
+ 0x5c20001c,
+ 0xe0000035,
+ 0x78018000,
+ 0x38210140,
+ 0x34420001,
+ 0x58220000,
+ 0xe0000032,
+ 0x90006000,
+ 0x34010000,
+ 0xd0010000,
+ 0x44400007,
+ 0x0f02075c,
+ 0x34010001,
+ 0x3301076a,
+ 0xd00c0000,
+ 0x34010000,
+ 0xe0000029,
+ 0x3302076a,
+ 0xd00c0000,
+ 0xe0000025,
+ 0x204100ff,
+ 0xf8000934,
+ 0xe0000022,
+ 0xf8000952,
+ 0xe0000020,
+ 0x204100ff,
+ 0xf8000969,
+ 0xe000001d,
+ 0xf8000987,
+ 0xe000001b,
+ 0x90006000,
+ 0x34010000,
+ 0xd0010000,
+ 0x4301092b,
+ 0x202b00ff,
+ 0x5d600007,
+ 0x3401005d,
+ 0xb9601000,
+ 0x34030001,
+ 0xfbffe8cf,
+ 0x330b092c,
+ 0xe000000b,
+ 0x34020000,
+ 0x3401005d,
+ 0xb8401800,
+ 0xfbffe8c9,
+ 0x44200004,
+ 0x34010000,
+ 0x3301092b,
+ 0xe0000002,
+ 0x34010001,
+ 0x3301092c,
+ 0xd00c0000,
+ 0xe0000003,
+ 0x340100fe,
+ 0xe0000002,
+ 0x34010001,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x64210125,
+ 0x34030000,
+ 0x4423000c,
+ 0x90001800,
+ 0x34010000,
+ 0xd0010000,
+ 0x2f01073c,
+ 0x2021ffff,
+ 0x54410004,
+ 0xd0030000,
+ 0x34030001,
+ 0xe0000003,
+ 0xd0030000,
+ 0x34030000,
+ 0xb8600800,
+ 0xc3a00000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0xb8206000,
+ 0x3c210001,
+ 0x78030003,
+ 0xb42c0800,
+ 0x3c210002,
+ 0xb8601000,
+ 0x38428fa8,
+ 0xb4225800,
+ 0x90002000,
+ 0x34010000,
+ 0xd0010000,
+ 0x29650000,
+ 0x5ca00003,
+ 0xd0040000,
+ 0xe000003a,
+ 0x5d800007,
+ 0x38638fa8,
+ 0x40610015,
+ 0x7c210001,
+ 0x5c20000d,
+ 0xd0040000,
+ 0xe0000009,
+ 0x7d810001,
+ 0x5c200009,
+ 0x78010003,
+ 0x38218fa8,
+ 0x40210009,
+ 0x7c210001,
+ 0x5c200004,
+ 0xd0040000,
+ 0x3401ffff,
+ 0xe0000029,
+ 0x41610008,
+ 0x34020001,
+ 0x34030000,
+ 0x29660004,
+ 0x31620009,
+ 0x31630008,
+ 0xd0040000,
+ 0x3d820002,
+ 0x44200004,
+ 0x78010003,
+ 0x38217dcc,
+ 0xe0000003,
+ 0x78010003,
+ 0x38217da4,
+ 0xb4410800,
+ 0x28230000,
+ 0xb8c01000,
+ 0xb8a00800,
+ 0xd8600000,
+ 0xb8201800,
+ 0x3401ffff,
+ 0x44600013,
+ 0x78010003,
+ 0x3d820002,
+ 0x38217d7c,
+ 0xb4411000,
+ 0x28410000,
+ 0x34020000,
+ 0x59620000,
+ 0x58230000,
+ 0x7d810005,
+ 0x31620009,
+ 0x5c220007,
+ 0x78020003,
+ 0x38428e70,
+ 0x28410000,
+ 0x44200003,
+ 0xb8400800,
+ 0xf800210c,
+ 0x34010000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x34010000,
+ 0xfbffffab,
+ 0xb8205800,
+ 0x34010001,
+ 0xfbffffa8,
+ 0xb9615800,
+ 0x34010002,
+ 0xfbffffa5,
+ 0xb9615800,
+ 0x34010003,
+ 0xfbffffa2,
+ 0xb9615800,
+ 0x34010004,
+ 0xfbffff9f,
+ 0xb9615800,
+ 0x34010005,
+ 0xfbffff9c,
+ 0xb9615800,
+ 0x34010007,
+ 0xfbffff99,
+ 0xb9615800,
+ 0x34010008,
+ 0xfbffff96,
+ 0xb9615800,
+ 0x34010009,
+ 0xfbffff93,
+ 0xb9610800,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x43030744,
+ 0x7801c020,
+ 0x38210134,
+ 0x206300ff,
+ 0x34020100,
+ 0xfbffe8e7,
+ 0x43020744,
+ 0x7803c020,
+ 0x38630134,
+ 0x43010745,
+ 0x44220006,
+ 0x28610000,
+ 0x18210080,
+ 0x58610000,
+ 0x43010744,
+ 0x33010745,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0x780dc020,
+ 0x39ad0090,
+ 0x29ab0000,
+ 0x340cfe01,
+ 0x43020744,
+ 0x396b0001,
+ 0xa16c5800,
+ 0xb4220800,
+ 0x202100ff,
+ 0x3c210001,
+ 0x2f020740,
+ 0xb9615800,
+ 0x01610001,
+ 0x2042ffff,
+ 0x202100ff,
+ 0x4c220006,
+ 0x2f010740,
+ 0xa16c5800,
+ 0x202100ff,
+ 0x3c210001,
+ 0xb9615800,
+ 0xfbffffd1,
+ 0x01620001,
+ 0x204200ff,
+ 0x34410001,
+ 0x202100ff,
+ 0x3c210001,
+ 0xa16c5800,
+ 0xb9615800,
+ 0x33020747,
+ 0x59ab0000,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780bc020,
+ 0xb9600800,
+ 0x38210094,
+ 0x28210000,
+ 0x20210001,
+ 0x5c20000a,
+ 0x78018000,
+ 0x38210054,
+ 0x28230000,
+ 0x78010003,
+ 0x38218e70,
+ 0xb8601000,
+ 0x5c60fff5,
+ 0xf80020cb,
+ 0xe3fffff3,
+ 0x7804c020,
+ 0x38840090,
+ 0x28830000,
+ 0x3402fe01,
+ 0x780bc020,
+ 0x00610001,
+ 0x3421ffff,
+ 0x202100ff,
+ 0x3c210001,
+ 0xa0621800,
+ 0xb8611800,
+ 0xb9601000,
+ 0x38420094,
+ 0x58830000,
+ 0x28410000,
+ 0x20210001,
+ 0x5c20000d,
+ 0x78018000,
+ 0x38210054,
+ 0x28230000,
+ 0x78010003,
+ 0x38218e70,
+ 0xb8601000,
+ 0x5c600002,
+ 0xf80020b1,
+ 0xb9600800,
+ 0x38210094,
+ 0x28210000,
+ 0xe3fffff3,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x34050000,
+ 0x78020003,
+ 0x202600ff,
+ 0x38428c00,
+ 0xb8a01800,
+ 0x34630001,
+ 0x404100a0,
+ 0x74640004,
+ 0x5c260003,
+ 0x404500a5,
+ 0xe0000003,
+ 0x34420001,
+ 0x4480fff9,
+ 0xb8a00800,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x34031838,
+ 0xc8611800,
+ 0x34010019,
+ 0x8c615800,
+ 0x204200ff,
+ 0x34030000,
+ 0x5c43000f,
+ 0x43010826,
+ 0x7802c020,
+ 0x3842029c,
+ 0x5c23000b,
+ 0x28410000,
+ 0x20210002,
+ 0x44230008,
+ 0x28420000,
+ 0x216100ff,
+ 0x20420004,
+ 0x44430004,
+ 0xfbffffdc,
+ 0x33010743,
+ 0xe0000002,
+ 0x33030743,
+ 0x43010743,
+ 0x202100ff,
+ 0xb5615800,
+ 0x216100ff,
+ 0xfbffff77,
+ 0xfbffffa0,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0xb8402000,
+ 0x4303076e,
+ 0xb4581000,
+ 0x34450758,
+ 0xb8205800,
+ 0x4460000f,
+ 0xb4841000,
+ 0xb4581000,
+ 0x34430740,
+ 0x40a20008,
+ 0x4440000a,
+ 0x0c610008,
+ 0x2f03073c,
+ 0x34020000,
+ 0x2063ffff,
+ 0x54230002,
+ 0xe0000004,
+ 0xfbffffc9,
+ 0x0f0b073c,
+ 0x0f0b073e,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x4301076e,
+ 0x34070000,
+ 0x5c270016,
+ 0x4301076f,
+ 0x7c210001,
+ 0x5c270013,
+ 0x78020003,
+ 0x78010002,
+ 0x38214a68,
+ 0x38428b24,
+ 0x58410040,
+ 0x37010758,
+ 0x3404000b,
+ 0x34020000,
+ 0x30220008,
+ 0x3484ffff,
+ 0x34210001,
+ 0x4c82fffc,
+ 0x78010003,
+ 0x38218ba8,
+ 0x30220010,
+ 0x30220029,
+ 0x3302076f,
+ 0xe000003c,
+ 0x34010000,
+ 0x0f01073e,
+ 0x43010765,
+ 0x37030740,
+ 0x37050758,
+ 0x202100ff,
+ 0xb8202000,
+ 0x44200004,
+ 0x2f010752,
+ 0x0f01073e,
+ 0xe0000010,
+ 0x40a10008,
+ 0x34840001,
+ 0x7486000b,
+ 0x34a50001,
+ 0x44200007,
+ 0x2c620008,
+ 0x34070001,
+ 0x2f01073e,
+ 0x50220003,
+ 0x2c610008,
+ 0x0f01073e,
+ 0x34630002,
+ 0x44c0fff4,
+ 0x7ce10000,
+ 0x44200022,
+ 0x2f02073e,
+ 0x2f01073c,
+ 0x44220007,
+ 0x2f01073e,
+ 0x34020000,
+ 0x2021ffff,
+ 0xfbffff87,
+ 0x2f01073e,
+ 0x0f01073c,
+ 0x4301082c,
+ 0x7c210001,
+ 0x5c200014,
+ 0x340b0000,
+ 0x330b082c,
+ 0x2f01073e,
+ 0xb9601000,
+ 0x2021ffff,
+ 0xfbffff7c,
+ 0x43010774,
+ 0x7c210001,
+ 0x5c2b000b,
+ 0x7801c201,
+ 0x330b0774,
+ 0x3821c588,
+ 0xf8000c80,
+ 0x3402fffc,
+ 0xa0221000,
+ 0x7801c201,
+ 0x3821c588,
+ 0x38420002,
+ 0xf8000c60,
+ 0x34010001,
+ 0x3301076f,
+ 0x34010000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x202100ff,
+ 0x33010744,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x3821a9b4,
+ 0x58410040,
+ 0x34020001,
+ 0x78010003,
+ 0x3302076e,
+ 0x3821f820,
+ 0x28230000,
+ 0x78020003,
+ 0x38428ba8,
+ 0x780100ff,
+ 0x38210000,
+ 0xa0611800,
+ 0x00630010,
+ 0x7801c201,
+ 0x30430010,
+ 0x30430029,
+ 0x3821c57c,
+ 0xf8000c59,
+ 0x202100ff,
+ 0x78020003,
+ 0x0f010740,
+ 0x3842f818,
+ 0x28410000,
+ 0x38212000,
+ 0x58410000,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x34010000,
+ 0x78030003,
+ 0x3301076e,
+ 0x3863f818,
+ 0x28610000,
+ 0x3402dfff,
+ 0xa0220800,
+ 0x58610000,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0xb8205800,
+ 0x7801c201,
+ 0x3821c574,
+ 0xf8000c3f,
+ 0x78040003,
+ 0xb8801000,
+ 0x38428acc,
+ 0x58410038,
+ 0x7d6b0000,
+ 0x78010003,
+ 0x78050003,
+ 0x5d600006,
+ 0x38218c00,
+ 0x4023000c,
+ 0xe0000005,
+ 0x40830008,
+ 0xe0000022,
+ 0x38218c00,
+ 0x40230011,
+ 0x38848acc,
+ 0x28810038,
+ 0x38a5fe14,
+ 0x34060000,
+ 0x0022000c,
+ 0x78040003,
+ 0x00210010,
+ 0x2042007f,
+ 0x20210080,
+ 0xb8221000,
+ 0x58a20000,
+ 0x38848c00,
+ 0x34c60001,
+ 0x408500a0,
+ 0x68c70004,
+ 0x5c450004,
+ 0x4560ffec,
+ 0x4083000d,
+ 0xe000000d,
+ 0x408100a5,
+ 0xb4a10800,
+ 0x5c410008,
+ 0x5d600003,
+ 0x40830008,
+ 0xe0000002,
+ 0x4083000d,
+ 0x408100a5,
+ 0xb4611800,
+ 0xe0000003,
+ 0x34840001,
+ 0x44e0ffee,
+ 0xb8600800,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x7801c040,
+ 0x38210c08,
+ 0x28210000,
+ 0x3402007f,
+ 0x202101ff,
+ 0x50410002,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x88211000,
+ 0x082312bc,
+ 0x0042000f,
+ 0x0063000c,
+ 0x88410800,
+ 0x0021000f,
+ 0x08423377,
+ 0x08213698,
+ 0x0042000d,
+ 0x0021000e,
+ 0xc8220800,
+ 0xb4230800,
+ 0x3421daca,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x3821029c,
+ 0x28210000,
+ 0x34031000,
+ 0x20240008,
+ 0x20220002,
+ 0x20210004,
+ 0x44400002,
+ 0x34030eec,
+ 0x44200002,
+ 0x3463ff26,
+ 0x44800002,
+ 0x3463ff59,
+ 0x43010779,
+ 0x5c200002,
+ 0x3463f8a8,
+ 0xb8600800,
+ 0xc3a00000,
+ 0xb8201000,
+ 0x88210800,
+ 0x084259f0,
+ 0x0021000f,
+ 0x0042000e,
+ 0x08213b06,
+ 0x0021000d,
+ 0xc8220800,
+ 0x342147c4,
+ 0xc3a00000,
+ 0x78010001,
+ 0x38213880,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x38218b88,
+ 0x282b0000,
+ 0xfbfffff7,
+ 0x096b0492,
+ 0x3c210007,
+ 0x780200fe,
+ 0xb5615800,
+ 0x3842f490,
+ 0xb5625800,
+ 0x01610012,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cffc8,
+ 0x5b8b0038,
+ 0x5b8c0034,
+ 0x5b8d0030,
+ 0x5b8e002c,
+ 0x5b8f0028,
+ 0x5b900024,
+ 0x5b910020,
+ 0x5b92001c,
+ 0x5b930018,
+ 0x5b940014,
+ 0x5b950010,
+ 0x5b96000c,
+ 0x5b970008,
+ 0x5b9d0004,
+ 0xb840a800,
+ 0xb820b000,
+ 0xb860b800,
+ 0xb8808000,
+ 0xb8a09000,
+ 0xb8c06800,
+ 0xfbffffd9,
+ 0x78030003,
+ 0x38638c00,
+ 0xb8209800,
+ 0x40620017,
+ 0x78010003,
+ 0x382185e0,
+ 0xb4411000,
+ 0x10410000,
+ 0x40630015,
+ 0x340b0000,
+ 0x3421000a,
+ 0x88618800,
+ 0x78020001,
+ 0x384286a0,
+ 0x3e230010,
+ 0xb6d50800,
+ 0x8c628800,
+ 0xb433a000,
+ 0x8a110800,
+ 0xb9606000,
+ 0x3652ffff,
+ 0x00210009,
+ 0xcae17800,
+ 0xb9e00800,
+ 0xfbffffb3,
+ 0x8a815800,
+ 0xb8207000,
+ 0xb9e00800,
+ 0xfbffff8f,
+ 0x0f010268,
+ 0x2f010268,
+ 0x29a30000,
+ 0x016b000f,
+ 0x2f02026c,
+ 0x2021ffff,
+ 0x6645ffff,
+ 0x2042ffff,
+ 0x88220800,
+ 0x2b020264,
+ 0x0021000c,
+ 0xc8621800,
+ 0x2021ffff,
+ 0x88611800,
+ 0x0064000c,
+ 0xb5645800,
+ 0x3d61000f,
+ 0x8c2f8000,
+ 0x458b0002,
+ 0x44a0ffe2,
+ 0x8aae0800,
+ 0x8a6e1000,
+ 0x8ace1800,
+ 0x0021000f,
+ 0x0042000f,
+ 0x0063000f,
+ 0x59a1001c,
+ 0x59ab0004,
+ 0x59af0008,
+ 0x59b0000c,
+ 0x59a40010,
+ 0x59a20014,
+ 0x59a30018,
+ 0x2b8b0038,
+ 0x2b8c0034,
+ 0x2b8d0030,
+ 0x2b8e002c,
+ 0x2b8f0028,
+ 0x2b900024,
+ 0x2b910020,
+ 0x2b92001c,
+ 0x2b930018,
+ 0x2b940014,
+ 0x2b950010,
+ 0x2b96000c,
+ 0x2b970008,
+ 0x2b9d0004,
+ 0x379c0038,
+ 0xc3a00000,
+ 0x34030000,
+ 0x34020007,
+ 0x58230000,
+ 0x3442ffff,
+ 0x34210004,
+ 0x4c40fffd,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b9d0004,
+ 0x7801c040,
+ 0x38210c28,
+ 0x28220000,
+ 0x78017fff,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x7801c040,
+ 0x5b820008,
+ 0x38210c24,
+ 0x28220000,
+ 0x78010003,
+ 0x5b82000c,
+ 0x3821f900,
+ 0x28230000,
+ 0x2b0202ac,
+ 0x37810008,
+ 0x88431000,
+ 0x34030064,
+ 0x8c431000,
+ 0xf800166b,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cffc8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x7802c020,
+ 0x3842029c,
+ 0x284c0000,
+ 0xb8207800,
+ 0x340b0000,
+ 0xfbffffdb,
+ 0x5b010264,
+ 0xfbffff2b,
+ 0xfbffff2c,
+ 0x0f01026a,
+ 0xfbffff3a,
+ 0x0f01026c,
+ 0xb9602800,
+ 0x21810004,
+ 0x5c2b000f,
+ 0x78010003,
+ 0x38218b88,
+ 0x2822000c,
+ 0x2b040274,
+ 0x28210008,
+ 0x2b030270,
+ 0x00420003,
+ 0x00210003,
+ 0x88621800,
+ 0x88812000,
+ 0x340130d4,
+ 0x8c611800,
+ 0x8c815800,
+ 0xb5635800,
+ 0x21810002,
+ 0x5c20000a,
+ 0x78010003,
+ 0x38218b88,
+ 0x28210018,
+ 0x2b020278,
+ 0x00210003,
+ 0x88411000,
+ 0x340130d4,
+ 0x8c411000,
+ 0xb5625800,
+ 0x21810008,
+ 0x5c20000a,
+ 0x78010003,
+ 0x38218b88,
+ 0x28210010,
+ 0x2b02027c,
+ 0x00210003,
+ 0x88411000,
+ 0x340130d4,
+ 0x8c411000,
+ 0xb5625800,
+ 0x21810001,
+ 0x5c20000a,
+ 0x78010003,
+ 0x38218b88,
+ 0x28210014,
+ 0x2b020284,
+ 0x00210003,
+ 0x88411000,
+ 0x340130d4,
+ 0x8c411000,
+ 0xb5625800,
+ 0x430107b0,
+ 0x78020003,
+ 0x38428b88,
+ 0xb0200800,
+ 0x3c210002,
+ 0x28420004,
+ 0xb4380800,
+ 0x2823028c,
+ 0x00420003,
+ 0xb8a06000,
+ 0x88621800,
+ 0x340130d4,
+ 0x8c611800,
+ 0x78020003,
+ 0x3842f000,
+ 0x284202f8,
+ 0x2b010288,
+ 0xb5635800,
+ 0xb5615800,
+ 0xb5625800,
+ 0x378e001c,
+ 0xb9c00800,
+ 0xfbffff85,
+ 0xb58c6800,
+ 0x78010003,
+ 0x5d800004,
+ 0x38218c00,
+ 0x2c21009c,
+ 0xe0000003,
+ 0x38218c00,
+ 0x2c21009e,
+ 0x5b81001c,
+ 0xb9800800,
+ 0xfbfffe91,
+ 0xfbffdd52,
+ 0x3c21000f,
+ 0x34020fa0,
+ 0x8c222800,
+ 0xb5b81800,
+ 0x34640240,
+ 0x34630248,
+ 0xb9c03000,
+ 0x0c650004,
+ 0xb9e00800,
+ 0xb9601000,
+ 0xb8a01800,
+ 0x44a00006,
+ 0x2c840004,
+ 0x430502b4,
+ 0x2084ffff,
+ 0x20a500ff,
+ 0xfbffff04,
+ 0x2b81002c,
+ 0xb5b81000,
+ 0x34430230,
+ 0x0c410230,
+ 0x2b810030,
+ 0x34440238,
+ 0x35850001,
+ 0x0c610004,
+ 0x2b810034,
+ 0x34430240,
+ 0x20ac00ff,
+ 0x0c410238,
+ 0x2f81003a,
+ 0x0c810004,
+ 0x2b810020,
+ 0x0c410240,
+ 0x2b810028,
+ 0x0c610004,
+ 0x2b810024,
+ 0x75830001,
+ 0x0c410248,
+ 0x4460ffcb,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0038,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b9d0004,
+ 0x7801c040,
+ 0x38210c18,
+ 0x28220000,
+ 0x78017fff,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x7801c040,
+ 0x5b820008,
+ 0x38210c0c,
+ 0x28220000,
+ 0x5b82000c,
+ 0x2b0202ac,
+ 0x37810008,
+ 0xf80015c1,
+ 0x00210008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x7801c040,
+ 0x38210c04,
+ 0x28210000,
+ 0x7803c040,
+ 0x78028000,
+ 0x20210001,
+ 0x64210000,
+ 0x38630c18,
+ 0x38420000,
+ 0x5c200008,
+ 0x28610000,
+ 0xa0220800,
+ 0x0021001f,
+ 0x7c210000,
+ 0x5c200003,
+ 0xfbffffdb,
+ 0xfbffff43,
+ 0x34010000,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x78010003,
+ 0x38218ba8,
+ 0x34020000,
+ 0x78040003,
+ 0x30220005,
+ 0x3022001e,
+ 0x3884f818,
+ 0x28830000,
+ 0x7801ffff,
+ 0x38217fff,
+ 0xa0611800,
+ 0x78020003,
+ 0x38428b24,
+ 0x34010000,
+ 0x58410014,
+ 0x58830000,
+ 0xd0050000,
+ 0x7802c040,
+ 0x38420c04,
+ 0x28410000,
+ 0x3403fffe,
+ 0xa0230800,
+ 0x58410000,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x7801c040,
+ 0x34030000,
+ 0x38210d04,
+ 0x7802c040,
+ 0x58230000,
+ 0x38420d08,
+ 0x58430000,
+ 0xb8606800,
+ 0x780f0003,
+ 0x3dae0002,
+ 0xb9e00800,
+ 0x38217cec,
+ 0xb5c10800,
+ 0x40210001,
+ 0x340c0000,
+ 0x51810014,
+ 0xb9e05800,
+ 0x396b7cec,
+ 0xb5cb5800,
+ 0x41610002,
+ 0x41620000,
+ 0x3d840016,
+ 0x3c210001,
+ 0x3c420011,
+ 0x7803c040,
+ 0xb8220800,
+ 0xb8240800,
+ 0x38630d00,
+ 0x38210001,
+ 0x58610000,
+ 0x34010001,
+ 0xfbffdbd2,
+ 0x41610001,
+ 0x358c0001,
+ 0xe3ffffed,
+ 0x35ad0001,
+ 0x75a10007,
+ 0x4420ffe3,
+ 0x7801c040,
+ 0x34040000,
+ 0x38210d34,
+ 0x58240000,
+ 0x7802c040,
+ 0x38420d38,
+ 0x7801c040,
+ 0x58440000,
+ 0x38210d40,
+ 0x58240000,
+ 0x7802c040,
+ 0x38420d44,
+ 0x7801c040,
+ 0x58440000,
+ 0x38210d4c,
+ 0x58240000,
+ 0x7802c040,
+ 0x780d0003,
+ 0x38420d50,
+ 0xb9a00800,
+ 0x58440000,
+ 0x38217cec,
+ 0x4022008d,
+ 0x7803c040,
+ 0x38630d58,
+ 0x7801c040,
+ 0x58640000,
+ 0x38210d5c,
+ 0x58240000,
+ 0xb8806000,
+ 0x5082001d,
+ 0xb9a05800,
+ 0x396b7cec,
+ 0x4162008e,
+ 0x4161008c,
+ 0x3d840016,
+ 0x3c420001,
+ 0x3c210011,
+ 0x7803c040,
+ 0xb8411000,
+ 0xb8441000,
+ 0x38420001,
+ 0x38630d30,
+ 0x7801c040,
+ 0x58620000,
+ 0x38210d3c,
+ 0x58220000,
+ 0x7803c040,
+ 0x38630d48,
+ 0x7801c040,
+ 0x58620000,
+ 0x38210d54,
+ 0x58220000,
+ 0x34010001,
+ 0xfbffdb95,
+ 0x4161008d,
+ 0x358c0001,
+ 0x51810002,
+ 0xe3ffffe5,
+ 0x7801c040,
+ 0x34030000,
+ 0x38210d84,
+ 0x7802c040,
+ 0x58230000,
+ 0x38420d88,
+ 0x58430000,
+ 0xb8606800,
+ 0x780f0003,
+ 0x3dae0002,
+ 0xb9e00800,
+ 0x38217cec,
+ 0xb5c10800,
+ 0x40210021,
+ 0x340c0000,
+ 0x51810014,
+ 0xb9e05800,
+ 0x396b7cec,
+ 0xb5cb5800,
+ 0x41610022,
+ 0x41620020,
+ 0x3d840016,
+ 0x3c210001,
+ 0x3c420011,
+ 0x7803c040,
+ 0xb8220800,
+ 0xb8240800,
+ 0x38630d80,
+ 0x38210001,
+ 0x58610000,
+ 0x34010001,
+ 0xfbffdb71,
+ 0x41610021,
+ 0x358c0001,
+ 0xe3ffffed,
+ 0x35ad0001,
+ 0x75a1001a,
+ 0x4420ffe3,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x780fc040,
+ 0xb9e02800,
+ 0x38a50c00,
+ 0x28a30000,
+ 0x7801ff00,
+ 0x38210000,
+ 0x7802000a,
+ 0xa0611800,
+ 0x38422710,
+ 0xb8621800,
+ 0x7804c040,
+ 0x58a30000,
+ 0x38840c14,
+ 0x28810000,
+ 0x780cffff,
+ 0xb9801000,
+ 0x38420000,
+ 0xa0220800,
+ 0x3821ffff,
+ 0x7802c040,
+ 0x38420c10,
+ 0x58810000,
+ 0x28410000,
+ 0x780bc040,
+ 0x780e00ff,
+ 0x3401ffff,
+ 0x58410000,
+ 0xb9601000,
+ 0x340d0000,
+ 0x38420000,
+ 0x34010118,
+ 0x584d0000,
+ 0x3421ffff,
+ 0x34420004,
+ 0x4c20fffd,
+ 0xfbffff40,
+ 0xb9602000,
+ 0x38840000,
+ 0x28820000,
+ 0x78010065,
+ 0x38210000,
+ 0x2042ffff,
+ 0xb8411000,
+ 0x7803c040,
+ 0x58820000,
+ 0x38630004,
+ 0x28610000,
+ 0xb9803000,
+ 0x38c60000,
+ 0xa0260800,
+ 0x38210005,
+ 0x58610000,
+ 0x28610000,
+ 0x78020019,
+ 0x38420000,
+ 0x2021ffff,
+ 0xb8220800,
+ 0x7805c040,
+ 0x58610000,
+ 0x38a50020,
+ 0x28a10000,
+ 0x78020007,
+ 0x38420000,
+ 0xa0260800,
+ 0x3821002d,
+ 0x58a10000,
+ 0x28a10000,
+ 0x7804c040,
+ 0x38840024,
+ 0x2021ffff,
+ 0xb8220800,
+ 0x58a10000,
+ 0x28820000,
+ 0x78010023,
+ 0x38210000,
+ 0x2042ffff,
+ 0xb8411000,
+ 0x7803c040,
+ 0x58820000,
+ 0x38630060,
+ 0x28620000,
+ 0x7801002d,
+ 0x38210000,
+ 0x2042ffff,
+ 0xb8411000,
+ 0x7807c040,
+ 0x58620000,
+ 0x38e70064,
+ 0x28e10000,
+ 0x7802c040,
+ 0x38420080,
+ 0xa0260800,
+ 0x38210009,
+ 0x58e10000,
+ 0x28410000,
+ 0x7804c040,
+ 0x38840084,
+ 0xa0260800,
+ 0x38210021,
+ 0x58410000,
+ 0x28820000,
+ 0x78010053,
+ 0x38210000,
+ 0x2042ffff,
+ 0xb8411000,
+ 0x7803c040,
+ 0x58820000,
+ 0x38630100,
+ 0x28610000,
+ 0x7804006f,
+ 0x38840000,
+ 0xa0260800,
+ 0x38210012,
+ 0x58610000,
+ 0x28610000,
+ 0x7802c040,
+ 0x38420108,
+ 0x2021ffff,
+ 0xb8240800,
+ 0x58610000,
+ 0x28410000,
+ 0x7803c040,
+ 0x386300a0,
+ 0xa0260800,
+ 0x38210041,
+ 0x58410000,
+ 0x28610000,
+ 0x7802c040,
+ 0x384200e0,
+ 0xa0260800,
+ 0x38210037,
+ 0x58610000,
+ 0x28410000,
+ 0x7803c040,
+ 0x386300e4,
+ 0xa0260800,
+ 0x38210009,
+ 0x58410000,
+ 0x28610000,
+ 0x7802c040,
+ 0x38420120,
+ 0xa0260800,
+ 0x38210008,
+ 0x58610000,
+ 0x28410000,
+ 0x7803c040,
+ 0x38630160,
+ 0xa0260800,
+ 0x38210014,
+ 0x58410000,
+ 0x28610000,
+ 0x7802c040,
+ 0x38420180,
+ 0xa0260800,
+ 0x38210012,
+ 0x58610000,
+ 0x28410000,
+ 0x7803c040,
+ 0x38630184,
+ 0xa0260800,
+ 0x38210004,
+ 0x58410000,
+ 0x28610000,
+ 0x7804c040,
+ 0x388400c0,
+ 0xa0260800,
+ 0x38210005,
+ 0x58610000,
+ 0x28820000,
+ 0x78010099,
+ 0x38210000,
+ 0x2042ffff,
+ 0xb8411000,
+ 0x7805c040,
+ 0x58820000,
+ 0x38a500c4,
+ 0x28a10000,
+ 0x7802002e,
+ 0x38420000,
+ 0xa0260800,
+ 0x382100b1,
+ 0x58a10000,
+ 0x28e10000,
+ 0x78030066,
+ 0x38630000,
+ 0x2021ffff,
+ 0xb8220800,
+ 0x58e10000,
+ 0x28a10000,
+ 0x7802c040,
+ 0x384200c8,
+ 0x2021ffff,
+ 0xb8230800,
+ 0x58a10000,
+ 0x28410000,
+ 0x7804c040,
+ 0x388400cc,
+ 0xa0260800,
+ 0x382100ec,
+ 0x58410000,
+ 0x28810000,
+ 0x7803001f,
+ 0x38630000,
+ 0xa0260800,
+ 0x3821002c,
+ 0x58810000,
+ 0x28810000,
+ 0x7802c040,
+ 0x384200d0,
+ 0x2021ffff,
+ 0xb8230800,
+ 0x58810000,
+ 0x28410000,
+ 0x7804c040,
+ 0x38840454,
+ 0xa0260800,
+ 0x38210003,
+ 0x58410000,
+ 0x28810000,
+ 0x78020024,
+ 0x38420000,
+ 0xa0260800,
+ 0x38210024,
+ 0x58810000,
+ 0x28810000,
+ 0x7803c040,
+ 0x38630464,
+ 0x2021ffff,
+ 0xb8220800,
+ 0x58810000,
+ 0x28610000,
+ 0x7802c040,
+ 0x38420c04,
+ 0xa0260800,
+ 0x38210001,
+ 0x58610000,
+ 0x28410000,
+ 0x38210001,
+ 0x58410000,
+ 0x90006000,
+ 0xd00d0000,
+ 0x780b0003,
+ 0x396b8c00,
+ 0x41610080,
+ 0x39ceffff,
+ 0xfbffdb4a,
+ 0x00210002,
+ 0x0f01022a,
+ 0x41610081,
+ 0xfbffdb46,
+ 0x78020003,
+ 0x3842f900,
+ 0x28480000,
+ 0x00210002,
+ 0x340a0003,
+ 0x34020064,
+ 0x8d024000,
+ 0x0f010228,
+ 0xb9e00800,
+ 0x38210c00,
+ 0x28240000,
+ 0x340b028f,
+ 0x78060003,
+ 0x2084ffff,
+ 0x28210000,
+ 0x38c68ba8,
+ 0x34090001,
+ 0xa02e0800,
+ 0x00210010,
+ 0x78070003,
+ 0x38e7f818,
+ 0x7805ffff,
+ 0x38a57fff,
+ 0x78030003,
+ 0x38638b24,
+ 0x8c882000,
+ 0x78020002,
+ 0x3842b2a4,
+ 0x88240800,
+ 0x5b0102ac,
+ 0x330a02b4,
+ 0x0f0b02b0,
+ 0x30c9001e,
+ 0x30c90005,
+ 0x28e10000,
+ 0x58620014,
+ 0xa0250800,
+ 0x38218000,
+ 0x58e10000,
+ 0xd00c0000,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0xb8202800,
+ 0x64a20003,
+ 0x64210001,
+ 0x78078000,
+ 0xb8220800,
+ 0x34020000,
+ 0x64210000,
+ 0x38e70338,
+ 0x5b820004,
+ 0x5c220016,
+ 0xbbe01800,
+ 0x3401fffc,
+ 0xa0611800,
+ 0xb8402000,
+ 0xb8204000,
+ 0x3c820002,
+ 0x34860001,
+ 0xb4471000,
+ 0x28410000,
+ 0xa0280800,
+ 0x58410000,
+ 0x44230005,
+ 0x20c400ff,
+ 0x74810003,
+ 0x4420fff7,
+ 0xe0000007,
+ 0x37810008,
+ 0xb4241000,
+ 0x34010001,
+ 0x3041fffc,
+ 0xe0000002,
+ 0xbbc01800,
+ 0x7ca10002,
+ 0x5c20000d,
+ 0x78018000,
+ 0x38210398,
+ 0x28220000,
+ 0x3403ff00,
+ 0xb8202000,
+ 0xa0431000,
+ 0x38420030,
+ 0x58220000,
+ 0x28810000,
+ 0x202100ff,
+ 0x5c20fffe,
+ 0xe0000087,
+ 0x7ca10004,
+ 0x5c20000d,
+ 0x78018000,
+ 0x38210398,
+ 0x28220000,
+ 0x3403ff00,
+ 0xb8202000,
+ 0xa0431000,
+ 0x38420040,
+ 0x58220000,
+ 0x28810000,
+ 0x202100ff,
+ 0x5c20fffe,
+ 0xe0000079,
+ 0x7ca10005,
+ 0x78038000,
+ 0x5c20000d,
+ 0xb8600800,
+ 0x38210398,
+ 0x28220000,
+ 0x3403ff00,
+ 0xb8202000,
+ 0xa0431000,
+ 0x38420020,
+ 0x58220000,
+ 0x28810000,
+ 0x202100ff,
+ 0x5c20fffe,
+ 0xe000006a,
+ 0xb8600800,
+ 0x38210398,
+ 0x28210000,
+ 0x20210100,
+ 0x00220008,
+ 0x44200017,
+ 0xd1020000,
+ 0xb8600800,
+ 0x38210398,
+ 0x28220000,
+ 0x3403ff00,
+ 0xb8202000,
+ 0xa0431000,
+ 0x38420006,
+ 0x58220000,
+ 0x28810000,
+ 0x202100ff,
+ 0x7c210006,
+ 0x4420fffd,
+ 0x28810000,
+ 0x20210100,
+ 0x00220008,
+ 0x7c410000,
+ 0x5c200052,
+ 0xd1020000,
+ 0x34010001,
+ 0xd0610000,
+ 0xe000004e,
+ 0x43810004,
+ 0x4420000f,
+ 0x28e10000,
+ 0xd2010000,
+ 0x38630398,
+ 0x28610000,
+ 0x3402ff00,
+ 0xb8602000,
+ 0xa0220800,
+ 0x38210001,
+ 0x58610000,
+ 0x28810000,
+ 0x202100ff,
+ 0x7c210001,
+ 0x4420fffd,
+ 0xe000003e,
+ 0x43810005,
+ 0x4420000f,
+ 0x28e10004,
+ 0xd2210000,
+ 0x38630398,
+ 0x28610000,
+ 0x3402ff00,
+ 0xb8602000,
+ 0xa0220800,
+ 0x38210002,
+ 0x58610000,
+ 0x28810000,
+ 0x202100ff,
+ 0x7c210002,
+ 0x4420fffd,
+ 0xe000002e,
+ 0x43810006,
+ 0x4420000f,
+ 0x28e10008,
+ 0xd2410000,
+ 0x38630398,
+ 0x28610000,
+ 0x3402ff00,
+ 0xb8602000,
+ 0xa0220800,
+ 0x38210003,
+ 0x58610000,
+ 0x28810000,
+ 0x202100ff,
+ 0x7c210003,
+ 0x4420fffd,
+ 0xe000001e,
+ 0x43810007,
+ 0x4420000f,
+ 0x28e1000c,
+ 0xd2610000,
+ 0x38630398,
+ 0x28610000,
+ 0x3402ff00,
+ 0xb8602000,
+ 0xa0220800,
+ 0x38210004,
+ 0x58610000,
+ 0x28810000,
+ 0x202100ff,
+ 0x7c210004,
+ 0x4420fffd,
+ 0xe000000e,
+ 0x34010001,
+ 0xd0610000,
+ 0x38630398,
+ 0x28610000,
+ 0x3402ff00,
+ 0xb8602000,
+ 0xa0220800,
+ 0x38210005,
+ 0x58610000,
+ 0x28810000,
+ 0x202100ff,
+ 0x7c210005,
+ 0x4420fffd,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x430206f8,
+ 0x780c0003,
+ 0x398cf054,
+ 0x430106f9,
+ 0x340b0004,
+ 0x34030001,
+ 0x5c220087,
+ 0x430106ae,
+ 0x202200ff,
+ 0x64410006,
+ 0x5c200008,
+ 0x68410006,
+ 0x4420000b,
+ 0x64410008,
+ 0x5c200006,
+ 0x6441000a,
+ 0x5c200006,
+ 0xe0000006,
+ 0x340b0005,
+ 0xe0000004,
+ 0x340b0006,
+ 0xe0000002,
+ 0x340b0007,
+ 0x430206ae,
+ 0x430106ac,
+ 0x4422005d,
+ 0x430106ae,
+ 0x202200ff,
+ 0x64410006,
+ 0x5c200024,
+ 0x68410006,
+ 0x5c200004,
+ 0x64410004,
+ 0x5c200007,
+ 0xe0000054,
+ 0x64410008,
+ 0x5c20001d,
+ 0x6441000a,
+ 0x5c20001b,
+ 0xe000004f,
+ 0x7804c020,
+ 0x38840014,
+ 0x28810000,
+ 0x3403fff0,
+ 0x3562fffc,
+ 0xa0230800,
+ 0x2042000f,
+ 0xb8220800,
+ 0x58810000,
+ 0x34010001,
+ 0x33010765,
+ 0x370606b0,
+ 0x28c30004,
+ 0x78020003,
+ 0x78010002,
+ 0x3821c154,
+ 0x38428b24,
+ 0x0f030752,
+ 0x58410044,
+ 0x40c1000d,
+ 0x34030001,
+ 0x3301077f,
+ 0x40c1000e,
+ 0x33010781,
+ 0xe000004d,
+ 0x430106ac,
+ 0x7c210004,
+ 0x5c200033,
+ 0xfbffdb4c,
+ 0xb0200800,
+ 0x3c220003,
+ 0x7805c020,
+ 0xc8411000,
+ 0x3c420002,
+ 0x38a50014,
+ 0xb44c1000,
+ 0x28410000,
+ 0x3564fffc,
+ 0x2084000f,
+ 0x5b0106b4,
+ 0x4041000f,
+ 0x78060003,
+ 0x38c6f134,
+ 0x330106bc,
+ 0x28410004,
+ 0x7803c050,
+ 0x386300cc,
+ 0x5b0106b8,
+ 0x4041000d,
+ 0x7807c050,
+ 0x38e700d0,
+ 0x330106bd,
+ 0x4041000e,
+ 0x330106be,
+ 0x40410010,
+ 0x330106bf,
+ 0x40410016,
+ 0x330106c0,
+ 0x28a10000,
+ 0x3402fff0,
+ 0xa0220800,
+ 0xb8240800,
+ 0x58a10000,
+ 0x40c1000c,
+ 0x58610000,
+ 0x28e10000,
+ 0x4420ffff,
+ 0x34010001,
+ 0x33010765,
+ 0x28c30004,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x3821c154,
+ 0x0f030752,
+ 0x58410044,
+ 0x34030001,
+ 0xe0000018,
+ 0x430206ae,
+ 0x78010003,
+ 0x38218ba8,
+ 0x330206ac,
+ 0x34020000,
+ 0x7804c020,
+ 0x3022002a,
+ 0x30220011,
+ 0x388400b0,
+ 0x28830000,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x38214a68,
+ 0x58410044,
+ 0x430206ad,
+ 0x780100ff,
+ 0x3821ffff,
+ 0x3c420018,
+ 0xa0611800,
+ 0xb8621800,
+ 0x58830000,
+ 0x34030000,
+ 0xb8600800,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x7801c020,
+ 0x38210000,
+ 0x28210000,
+ 0x20210001,
+ 0x64210000,
+ 0x5c20005b,
+ 0x7804c020,
+ 0xb8800800,
+ 0x382100b0,
+ 0x28220000,
+ 0x780100ff,
+ 0x38210000,
+ 0xa0411000,
+ 0x00420010,
+ 0x330206ae,
+ 0x430106ae,
+ 0x202100ff,
+ 0x3422fffc,
+ 0x74410008,
+ 0x5c20004d,
+ 0x3c410002,
+ 0x78020003,
+ 0x3842859c,
+ 0xb4220800,
+ 0x28210000,
+ 0xc0200000,
+ 0x388400b0,
+ 0x28830000,
+ 0x780100ff,
+ 0x3821ffff,
+ 0x78020c00,
+ 0xa0611800,
+ 0x38420000,
+ 0xb8621800,
+ 0x58830000,
+ 0xe000003d,
+ 0x388400b0,
+ 0x28830000,
+ 0x780100ff,
+ 0x3821ffff,
+ 0x78020400,
+ 0xa0611800,
+ 0x38420000,
+ 0xb8621800,
+ 0x58830000,
+ 0x34010005,
+ 0xe0000021,
+ 0x388400b0,
+ 0x28830000,
+ 0x780100ff,
+ 0x3821ffff,
+ 0x78020600,
+ 0xa0611800,
+ 0x38420000,
+ 0xb8621800,
+ 0x58830000,
+ 0x34010007,
+ 0xe0000016,
+ 0x388400b0,
+ 0x28830000,
+ 0x780100ff,
+ 0x3821ffff,
+ 0x78020800,
+ 0xa0611800,
+ 0x38420000,
+ 0xb8621800,
+ 0x58830000,
+ 0x34010009,
+ 0xe000000b,
+ 0x388400b0,
+ 0x28830000,
+ 0x780100ff,
+ 0x3821ffff,
+ 0x78020a00,
+ 0xa0611800,
+ 0x38420000,
+ 0xb8621800,
+ 0x58830000,
+ 0x3401000b,
+ 0x330106ad,
+ 0x430106ee,
+ 0x44200003,
+ 0x34010001,
+ 0x330106f8,
+ 0x78010003,
+ 0x38218ba8,
+ 0x34040001,
+ 0x78030003,
+ 0x78020002,
+ 0x38638b24,
+ 0x3842bd64,
+ 0x3024002a,
+ 0x30240011,
+ 0x58620044,
+ 0x34010020,
+ 0xfbffd567,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0x430106ad,
+ 0x64210005,
+ 0x5c200023,
+ 0x780c0003,
+ 0x398cf134,
+ 0x2f01073c,
+ 0x29820004,
+ 0x2021ffff,
+ 0x5c22006e,
+ 0x43010746,
+ 0x5c20006c,
+ 0x7804c020,
+ 0x38840014,
+ 0x28830000,
+ 0x3402ff0f,
+ 0x78050003,
+ 0x28810000,
+ 0xa0621800,
+ 0x38a598d8,
+ 0x2021000f,
+ 0x3c210004,
+ 0xb8611800,
+ 0x58830000,
+ 0x28a10034,
+ 0x5b0106a4,
+ 0x28a10038,
+ 0x5b0106a8,
+ 0xfbffd59f,
+ 0x3401000e,
+ 0xfbffd541,
+ 0x34010012,
+ 0xfbffd53f,
+ 0x34010006,
+ 0xfbffd53d,
+ 0x3401000a,
+ 0xfbffd53b,
+ 0xe0000054,
+ 0x370c06b0,
+ 0x2f01073c,
+ 0x29820004,
+ 0x2021ffff,
+ 0x5c22004d,
+ 0x43010746,
+ 0x202b00ff,
+ 0x5d60004a,
+ 0xfbffda66,
+ 0x780dc020,
+ 0xb9a02800,
+ 0x330106e9,
+ 0x38a50014,
+ 0x28a40000,
+ 0x7802fc1f,
+ 0x780303e0,
+ 0x430106e9,
+ 0x3842ffff,
+ 0x38630000,
+ 0xb0200800,
+ 0x3c210015,
+ 0xa0822000,
+ 0xa0230800,
+ 0xb8812000,
+ 0x58a40000,
+ 0x330b0765,
+ 0x330b06f8,
+ 0x4182000c,
+ 0x7801c050,
+ 0x382100cc,
+ 0x7803c050,
+ 0x58220000,
+ 0x386300d0,
+ 0x28610000,
+ 0x4420ffff,
+ 0x29820008,
+ 0x78010003,
+ 0x38218b88,
+ 0x58220000,
+ 0x4181000f,
+ 0x330106f2,
+ 0x430106f2,
+ 0x202100ff,
+ 0xfbffdb6c,
+ 0x41830010,
+ 0x7804c020,
+ 0x38840088,
+ 0x28810000,
+ 0x3c630003,
+ 0x3402ffc7,
+ 0xa0220800,
+ 0x20630038,
+ 0xb8230800,
+ 0x58810000,
+ 0x430106e9,
+ 0xb9a02800,
+ 0x38a50014,
+ 0x330106e8,
+ 0x28a20000,
+ 0x7803ffe0,
+ 0x7804001f,
+ 0x430106e8,
+ 0x3863ffff,
+ 0x38840000,
+ 0xb0200800,
+ 0x3c210010,
+ 0xa0431000,
+ 0xa0240800,
+ 0xb8411000,
+ 0x58a20000,
+ 0x28a40000,
+ 0x3403ff0f,
+ 0x370106a4,
+ 0x28a20000,
+ 0xa0832000,
+ 0x2042000f,
+ 0x3c420004,
+ 0xb8822000,
+ 0x58a40000,
+ 0xfbffd55a,
+ 0xe0000003,
+ 0x34010001,
+ 0xe0000018,
+ 0x430206ae,
+ 0x78010003,
+ 0x38218ba8,
+ 0x330206ac,
+ 0x34020000,
+ 0x7804c020,
+ 0x3022002a,
+ 0x30220011,
+ 0x388400b0,
+ 0x28830000,
+ 0x78020003,
+ 0x78010002,
+ 0x38428b24,
+ 0x38214a68,
+ 0x58410044,
+ 0x430206ad,
+ 0x780100ff,
+ 0x3821ffff,
+ 0x3c420018,
+ 0xa0611800,
+ 0xb8621800,
+ 0x58830000,
+ 0x34010000,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x3401000a,
+ 0x330106ae,
+ 0x430206ee,
+ 0x78070003,
+ 0x78060002,
+ 0x78040003,
+ 0x38848ba8,
+ 0x38e78b24,
+ 0x38c6bd64,
+ 0x34050001,
+ 0x34010020,
+ 0x44400002,
+ 0x330506f8,
+ 0x58e60044,
+ 0x3085002a,
+ 0x30850011,
+ 0xfbffd4b7,
+ 0x3401000a,
+ 0xfbfffe56,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x34010004,
+ 0x330106ae,
+ 0x430206ee,
+ 0x78070003,
+ 0x78060002,
+ 0x78040003,
+ 0x38848ba8,
+ 0x38e78b24,
+ 0x38c6bd64,
+ 0x34050001,
+ 0x34010020,
+ 0x44400002,
+ 0x330506f8,
+ 0x58e60044,
+ 0x3085002a,
+ 0x30850011,
+ 0xfbffd49f,
+ 0x34010004,
+ 0xfbfffe3e,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x38210000,
+ 0x28210000,
+ 0x20210001,
+ 0x64210000,
+ 0x5c200049,
+ 0x7804c020,
+ 0x388400bc,
+ 0x28810000,
+ 0x780200ff,
+ 0x38420000,
+ 0xa0220800,
+ 0x00220010,
+ 0x64410006,
+ 0x5c200017,
+ 0x74410006,
+ 0x5c200004,
+ 0x64410004,
+ 0x5c200007,
+ 0xc3a00000,
+ 0x64410008,
+ 0x5c20001f,
+ 0x6441000a,
+ 0x5c200029,
+ 0xc3a00000,
+ 0x28820000,
+ 0x780300ff,
+ 0x3863ffff,
+ 0x78010400,
+ 0x38210000,
+ 0xa0431000,
+ 0xb8411000,
+ 0x58820000,
+ 0x28820000,
+ 0x78010500,
+ 0x38210000,
+ 0xe000000c,
+ 0x28820000,
+ 0x780300ff,
+ 0x3863ffff,
+ 0x78010600,
+ 0x38210000,
+ 0xa0431000,
+ 0xb8411000,
+ 0x58820000,
+ 0x28820000,
+ 0x78010700,
+ 0x38210000,
+ 0xa0431000,
+ 0xb8411000,
+ 0x58820000,
+ 0xc3a00000,
+ 0x28820000,
+ 0x780300ff,
+ 0x3863ffff,
+ 0x78010800,
+ 0x38210000,
+ 0xa0431000,
+ 0xb8411000,
+ 0x58820000,
+ 0x28820000,
+ 0x78010900,
+ 0x38210000,
+ 0xe3fffff1,
+ 0x28820000,
+ 0x780300ff,
+ 0x3863ffff,
+ 0x78010a00,
+ 0x38210000,
+ 0xa0431000,
+ 0xb8411000,
+ 0x58820000,
+ 0x28820000,
+ 0x78010b00,
+ 0x38210000,
+ 0xa0431000,
+ 0xb8411000,
+ 0x58820000,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x33010824,
+ 0x34030001,
+ 0xb8201000,
+ 0x33010825,
+ 0x5c200005,
+ 0x33030826,
+ 0x2f01073c,
+ 0x2021ffff,
+ 0xfbfff8b7,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x780bc050,
+ 0x396b0080,
+ 0x29620000,
+ 0x340c0014,
+ 0xb9800800,
+ 0x38420020,
+ 0x59620000,
+ 0xf8001a95,
+ 0x29620000,
+ 0xb9800800,
+ 0x38420001,
+ 0x59620000,
+ 0xf8001a90,
+ 0x34010000,
+ 0x33010926,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x43010927,
+ 0x5c20000b,
+ 0x7804c050,
+ 0x38840170,
+ 0x28830000,
+ 0x7801dfff,
+ 0x3821ffff,
+ 0x78022000,
+ 0xa0611800,
+ 0x38420000,
+ 0xb8621800,
+ 0x58830000,
+ 0x780cc050,
+ 0xb9800800,
+ 0x38210194,
+ 0x28210000,
+ 0x780b0080,
+ 0xb9601000,
+ 0x38420000,
+ 0xa0220800,
+ 0x00210017,
+ 0x202100ff,
+ 0x64210001,
+ 0x5c200007,
+ 0x34010014,
+ 0xf8001a6b,
+ 0xb9800800,
+ 0x38210194,
+ 0x28210000,
+ 0xe3fffff4,
+ 0x34010001,
+ 0x33010926,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x43010928,
+ 0x780cc050,
+ 0xb9805800,
+ 0x7c210001,
+ 0x396b0080,
+ 0x5c20002b,
+ 0x29620000,
+ 0x34010014,
+ 0x20420001,
+ 0x7c420001,
+ 0x5c40001d,
+ 0x43020927,
+ 0x7805c050,
+ 0x7804dfff,
+ 0x78032000,
+ 0x38a50170,
+ 0x3884ffff,
+ 0x38630000,
+ 0x5c400005,
+ 0x28a20000,
+ 0xa0441000,
+ 0xb8431000,
+ 0x58a20000,
+ 0x29620000,
+ 0x3403fffe,
+ 0xa0431000,
+ 0x59620000,
+ 0xf8001a40,
+ 0x29620000,
+ 0x34010014,
+ 0x38420040,
+ 0x59620000,
+ 0xf8001a3b,
+ 0x29620000,
+ 0x3403ffbf,
+ 0x34010014,
+ 0xa0431000,
+ 0x59620000,
+ 0xf8001a35,
+ 0xfbffffac,
+ 0xb9801000,
+ 0x38420080,
+ 0x28430000,
+ 0x3404ffdf,
+ 0x34010014,
+ 0xa0641800,
+ 0x58430000,
+ 0xf8001a2c,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x43010927,
+ 0x5c20000b,
+ 0x7804c050,
+ 0x38840170,
+ 0x28830000,
+ 0x7801dfff,
+ 0x3821ffff,
+ 0x78022000,
+ 0xa0611800,
+ 0x38420000,
+ 0xb8621800,
+ 0x58830000,
+ 0x7801c050,
+ 0x38210194,
+ 0x28220000,
+ 0x78010080,
+ 0x38210000,
+ 0xa0411000,
+ 0x00420017,
+ 0x7801c050,
+ 0x33020926,
+ 0x38210080,
+ 0x28220000,
+ 0x43010918,
+ 0x20420001,
+ 0x7c210001,
+ 0x5c20001c,
+ 0x43010919,
+ 0x7c210001,
+ 0x5c200019,
+ 0x4301091a,
+ 0x7c210001,
+ 0x5c200016,
+ 0x4301091b,
+ 0x7c210001,
+ 0x5c200013,
+ 0x4301091c,
+ 0x7c210001,
+ 0x5c200010,
+ 0x4301091d,
+ 0x7c210001,
+ 0x5c20000d,
+ 0x4301091e,
+ 0x7c210001,
+ 0x5c20000a,
+ 0x43010921,
+ 0x202300ff,
+ 0x7c610001,
+ 0x5c200006,
+ 0x7c410000,
+ 0x33030924,
+ 0x5c200005,
+ 0xfbffff50,
+ 0xe0000003,
+ 0x34010000,
+ 0x33010924,
+ 0x34010000,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x202100ff,
+ 0x90005000,
+ 0x34020000,
+ 0xd0020000,
+ 0x20220007,
+ 0x3c48000f,
+ 0x7804c050,
+ 0x7802c050,
+ 0x7803fffc,
+ 0xb8403000,
+ 0x388401c8,
+ 0x38637fff,
+ 0x34070001,
+ 0x38c60118,
+ 0x20210008,
+ 0x44200006,
+ 0x28c10000,
+ 0x38210020,
+ 0x58c10000,
+ 0x3307091e,
+ 0xe000000a,
+ 0x28810000,
+ 0x3402ffdf,
+ 0xa0230800,
+ 0xb8280800,
+ 0x58810000,
+ 0x28c10000,
+ 0xa0220800,
+ 0x58c10000,
+ 0x3307091e,
+ 0xd00a0000,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x3301091e,
+ 0xfbffff62,
+ 0x7803c050,
+ 0x38630118,
+ 0x28610000,
+ 0x3402ffdf,
+ 0x7804c050,
+ 0xa0220800,
+ 0x58610000,
+ 0x388401c8,
+ 0x28820000,
+ 0x7801fffc,
+ 0x38217fff,
+ 0xa0411000,
+ 0x58820000,
+ 0xd00b0000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x202100ff,
+ 0x90005000,
+ 0x34020000,
+ 0xd0020000,
+ 0x20220007,
+ 0x3c480012,
+ 0x7804c050,
+ 0x7802c050,
+ 0x7803ffe3,
+ 0xb8403000,
+ 0x388401c8,
+ 0x3863ffff,
+ 0x34070001,
+ 0x38c60118,
+ 0x20210008,
+ 0x44200006,
+ 0x28c10000,
+ 0x38210040,
+ 0x58c10000,
+ 0x3307091d,
+ 0xe000000a,
+ 0x28810000,
+ 0x3402ffbf,
+ 0xa0230800,
+ 0xb8280800,
+ 0x58810000,
+ 0x28c10000,
+ 0xa0220800,
+ 0x58c10000,
+ 0x3307091d,
+ 0xd00a0000,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x3301091d,
+ 0xfbffff28,
+ 0x7804c050,
+ 0x388401c8,
+ 0x28820000,
+ 0x7801ffe3,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x7803c050,
+ 0x58820000,
+ 0x38630118,
+ 0x28610000,
+ 0x3402ffbf,
+ 0xa0220800,
+ 0x58610000,
+ 0xd00b0000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x90003000,
+ 0x34010000,
+ 0xd0010000,
+ 0x34020001,
+ 0x78010003,
+ 0x33020928,
+ 0x38218ba8,
+ 0x78050003,
+ 0x30220018,
+ 0x30220031,
+ 0x38a5f818,
+ 0x28a40000,
+ 0x7801ffbf,
+ 0x3821ffff,
+ 0xa0812000,
+ 0x78020040,
+ 0x38420000,
+ 0x78030003,
+ 0x78010002,
+ 0xb8822000,
+ 0x38638b24,
+ 0x3821c7d8,
+ 0x58610060,
+ 0x58a40000,
+ 0xd0060000,
+ 0xc3a00000,
+ 0x90003000,
+ 0x34010000,
+ 0xd0010000,
+ 0x34020000,
+ 0x78010003,
+ 0x33020928,
+ 0x38218ba8,
+ 0x78050003,
+ 0x30220031,
+ 0x30220018,
+ 0x38a5f818,
+ 0x28a40000,
+ 0x7801ffbf,
+ 0x3821ffff,
+ 0x78030003,
+ 0x78020002,
+ 0xa0812000,
+ 0x38638b24,
+ 0x38424a68,
+ 0x58620060,
+ 0x58a40000,
+ 0xd0060000,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0xb8206800,
+ 0x340c0000,
+ 0x3d8b0002,
+ 0x78010003,
+ 0x382185c0,
+ 0xb5610800,
+ 0x28250000,
+ 0x340400d0,
+ 0x3406000f,
+ 0x34010000,
+ 0xb8201000,
+ 0xb8201800,
+ 0xf8002af9,
+ 0x34010000,
+ 0xb8201000,
+ 0xb8201800,
+ 0x340400d4,
+ 0x3405000f,
+ 0xf8002b2a,
+ 0x358c0001,
+ 0xb56d5800,
+ 0x75820006,
+ 0x59610000,
+ 0x4440ffeb,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0xb8206800,
+ 0x340c0000,
+ 0x3d8b0002,
+ 0x78010003,
+ 0x382185c0,
+ 0xb5610800,
+ 0x28250000,
+ 0x340400d0,
+ 0x3406000f,
+ 0x34010000,
+ 0xb8201000,
+ 0xb8201800,
+ 0xf8002ad6,
+ 0xb56d5800,
+ 0x29650000,
+ 0x34010000,
+ 0xb8201000,
+ 0xb8201800,
+ 0x340400d4,
+ 0x3406000f,
+ 0xf8002ace,
+ 0x358c0001,
+ 0x75810006,
+ 0x4420ffeb,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x7801c000,
+ 0x38210000,
+ 0x28210010,
+ 0x00210017,
+ 0xf80018f7,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0x780de000,
+ 0x39ad302c,
+ 0x29a10000,
+ 0x780cc000,
+ 0x398c0000,
+ 0x38210002,
+ 0x59a10000,
+ 0x29810010,
+ 0x29820000,
+ 0x7801ffff,
+ 0x38217fff,
+ 0x298b0000,
+ 0xa1615800,
+ 0x598b0000,
+ 0xfbffffe3,
+ 0x396b8000,
+ 0x598b0000,
+ 0x29a10000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0x59a10000,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0x780de000,
+ 0x39ad302c,
+ 0x29a10000,
+ 0x780cc000,
+ 0x398c0000,
+ 0x38210002,
+ 0x59a10000,
+ 0x29810010,
+ 0x298b0000,
+ 0x7801fffd,
+ 0x3821ffff,
+ 0xa1615800,
+ 0x598b0000,
+ 0xfbffffc4,
+ 0x78010002,
+ 0x38210000,
+ 0xb9615800,
+ 0x598b0000,
+ 0x29a10000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0x59a10000,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cffd4,
+ 0x5b8b002c,
+ 0x5b8c0028,
+ 0x5b8d0024,
+ 0x5b8e0020,
+ 0x5b8f001c,
+ 0x5b900018,
+ 0x5b910014,
+ 0x5b920010,
+ 0x5b93000c,
+ 0x5b940008,
+ 0x5b950004,
+ 0x780bc00c,
+ 0x396b0000,
+ 0x29680000,
+ 0x7801c000,
+ 0x38210000,
+ 0x28210004,
+ 0x780dc010,
+ 0x39ad0000,
+ 0x29a54068,
+ 0x7803000f,
+ 0x38638000,
+ 0x00a10011,
+ 0x78043ff0,
+ 0x29a5406c,
+ 0x38840000,
+ 0x20217c00,
+ 0x3ca2000f,
+ 0x78134000,
+ 0x29a54070,
+ 0xa0431800,
+ 0xa0441000,
+ 0xb8230800,
+ 0xb8220800,
+ 0x20a20078,
+ 0xb8220800,
+ 0x20a20080,
+ 0xb8220800,
+ 0x00a30009,
+ 0x20a20300,
+ 0xb8220800,
+ 0x3ca40012,
+ 0x20620002,
+ 0xb8220800,
+ 0x3a730000,
+ 0x20630004,
+ 0x78078000,
+ 0xa0931000,
+ 0xb8230800,
+ 0x38e70000,
+ 0x01060015,
+ 0xb8220800,
+ 0xa0872000,
+ 0x20c60001,
+ 0xb8240800,
+ 0x780e8008,
+ 0x39ce0000,
+ 0xb8260800,
+ 0x59c101d4,
+ 0x29a94068,
+ 0x780107e0,
+ 0x38210000,
+ 0x3d220008,
+ 0x780a0003,
+ 0x29a9406c,
+ 0xa0411000,
+ 0x394af800,
+ 0x0123000e,
+ 0x7805001c,
+ 0x29a94070,
+ 0x206107fe,
+ 0xb8411000,
+ 0x3d240012,
+ 0x3d21000d,
+ 0xa06a1800,
+ 0x38a50000,
+ 0x78090800,
+ 0xa0852000,
+ 0xb8431000,
+ 0x39290000,
+ 0xb8441000,
+ 0xa0290800,
+ 0xb8411000,
+ 0xb8461000,
+ 0x38018000,
+ 0x59c201d8,
+ 0xb5a10800,
+ 0x28230000,
+ 0x210f0001,
+ 0x78050007,
+ 0x3c620009,
+ 0x780101ff,
+ 0x29a34068,
+ 0x3821f000,
+ 0x38210e00,
+ 0xa0220800,
+ 0x00620012,
+ 0x78040008,
+ 0x2043001e,
+ 0xb8230800,
+ 0x204201e0,
+ 0xb8220800,
+ 0xb82f0800,
+ 0x59c101dc,
+ 0x29a34038,
+ 0x38a5fffe,
+ 0x38840000,
+ 0x0061000d,
+ 0x78021ff0,
+ 0x29a3403c,
+ 0xa0250800,
+ 0x38420000,
+ 0x3c630013,
+ 0x78112000,
+ 0xa0642000,
+ 0xa0621000,
+ 0xb8240800,
+ 0xb8220800,
+ 0x3a310000,
+ 0xa0711000,
+ 0xb8220800,
+ 0xa0731000,
+ 0xb8220800,
+ 0xa0671800,
+ 0xb8230800,
+ 0xb82f0800,
+ 0x59c10180,
+ 0x29a64000,
+ 0x78030200,
+ 0x38630000,
+ 0x3cc1000a,
+ 0x78140040,
+ 0x29a64004,
+ 0x20210400,
+ 0x3a940000,
+ 0x3cc20012,
+ 0x78120080,
+ 0x29a6403c,
+ 0xa0431000,
+ 0xb8220800,
+ 0x00c3000c,
+ 0x00c4000b,
+ 0x20620002,
+ 0xb8220800,
+ 0x20620004,
+ 0xb8220800,
+ 0x20620008,
+ 0xb8220800,
+ 0x20620010,
+ 0xb8220800,
+ 0x20620020,
+ 0xb8220800,
+ 0x20620040,
+ 0xb8220800,
+ 0x20620080,
+ 0xb8220800,
+ 0x20620100,
+ 0xb8220800,
+ 0x20630200,
+ 0x20820800,
+ 0xb8230800,
+ 0xb8220800,
+ 0x20821000,
+ 0x00c50004,
+ 0xb8220800,
+ 0x20822000,
+ 0x29a62170,
+ 0xb8220800,
+ 0x20844000,
+ 0xa0b41800,
+ 0xb8240800,
+ 0xb8230800,
+ 0x3a520000,
+ 0x78020100,
+ 0x38420000,
+ 0xa0b22000,
+ 0x3cc30010,
+ 0x78100400,
+ 0xa0a22800,
+ 0xb8240800,
+ 0x3a100000,
+ 0xb8250800,
+ 0xa0701800,
+ 0xb8230800,
+ 0xb82f0800,
+ 0x59c10184,
+ 0x5961001c,
+ 0x01010004,
+ 0x29c20184,
+ 0x0108000b,
+ 0x20210001,
+ 0x21150001,
+ 0x5c2000c9,
+ 0x29a12170,
+ 0x78081000,
+ 0x39080000,
+ 0x00210009,
+ 0x78046000,
+ 0x2021007e,
+ 0xb82f0800,
+ 0x59610018,
+ 0x29a34000,
+ 0x38840000,
+ 0x780500ff,
+ 0x00620015,
+ 0x38a50000,
+ 0x29a34004,
+ 0x20420600,
+ 0x7806ff00,
+ 0x3c61000b,
+ 0x38c60000,
+ 0x3c630014,
+ 0xa02a0800,
+ 0xb8411000,
+ 0xa0690800,
+ 0xb8411000,
+ 0xa0680800,
+ 0xa0641800,
+ 0xb8411000,
+ 0xb8431000,
+ 0xb84f1000,
+ 0x59620004,
+ 0x29a34004,
+ 0x78040003,
+ 0x3884ffc0,
+ 0x0061001d,
+ 0x3884003e,
+ 0x29a34008,
+ 0x7807e000,
+ 0x38e73030,
+ 0x3c630003,
+ 0x780a0001,
+ 0x206200f8,
+ 0xb8220800,
+ 0x2062ff00,
+ 0xa0652800,
+ 0xb8220800,
+ 0xa0661800,
+ 0xb8250800,
+ 0xb8230800,
+ 0x59610008,
+ 0x29a14008,
+ 0x78060001,
+ 0x38c60000,
+ 0x0022001c,
+ 0x394af000,
+ 0x29a1400c,
+ 0x2042000e,
+ 0x780c0001,
+ 0x3c210004,
+ 0x398cfffe,
+ 0x202107f0,
+ 0xb8411000,
+ 0xb84f1000,
+ 0x5962000c,
+ 0x29a1400c,
+ 0xb9301000,
+ 0xb9024000,
+ 0x00210006,
+ 0xba284000,
+ 0xa0812000,
+ 0xb88f2000,
+ 0x59640010,
+ 0x28e10000,
+ 0xba684000,
+ 0x38c5c000,
+ 0x29a24050,
+ 0x7809003e,
+ 0x39290000,
+ 0x00410017,
+ 0x00430016,
+ 0x00440015,
+ 0x206300e0,
+ 0x20210008,
+ 0x0042000f,
+ 0xb8230800,
+ 0x20840200,
+ 0xa0461000,
+ 0xb8240800,
+ 0xb8220800,
+ 0x59c152b0,
+ 0x59c1541c,
+ 0x29a44048,
+ 0x780bffff,
+ 0x396b0000,
+ 0x00810014,
+ 0x7807000f,
+ 0x29a4404c,
+ 0x20210ffe,
+ 0x78060030,
+ 0x3c82000c,
+ 0x3c830012,
+ 0xa04a1000,
+ 0x3c840014,
+ 0xb8220800,
+ 0xa0721800,
+ 0xb8230800,
+ 0xa0902000,
+ 0xb8240800,
+ 0x59c152f8,
+ 0x29a1404c,
+ 0x38e7fff0,
+ 0x38c60000,
+ 0x3c220006,
+ 0xb8c73000,
+ 0x00210006,
+ 0xa0511000,
+ 0xa02c0800,
+ 0xb8220800,
+ 0x59c152f0,
+ 0x29a1404c,
+ 0x780a00c0,
+ 0x394a0000,
+ 0x3c210002,
+ 0x78070f00,
+ 0xa1014000,
+ 0x59c852e8,
+ 0x29a2404c,
+ 0x38e70000,
+ 0x78080004,
+ 0x0041000f,
+ 0x39080000,
+ 0x29a24050,
+ 0xa0a12800,
+ 0x3c410011,
+ 0xa0294800,
+ 0xa0340800,
+ 0xb8a92800,
+ 0xb8a12800,
+ 0x59c552e0,
+ 0x29a24050,
+ 0x00450004,
+ 0x00410005,
+ 0x20a30020,
+ 0x2021000e,
+ 0x00440003,
+ 0xb8230800,
+ 0x00430002,
+ 0x20a50040,
+ 0x20840100,
+ 0xb8250800,
+ 0xb8240800,
+ 0x20630400,
+ 0xb8230800,
+ 0x20422000,
+ 0xb8220800,
+ 0x59c152d8,
+ 0x59c15388,
+ 0x29a24050,
+ 0x0044000b,
+ 0x0041000d,
+ 0x20830100,
+ 0x0042000a,
+ 0x2021003e,
+ 0xb8230800,
+ 0x20840600,
+ 0x20431000,
+ 0xb8240800,
+ 0xb8230800,
+ 0x20432000,
+ 0x2042c000,
+ 0xb8230800,
+ 0xb8220800,
+ 0x59c15384,
+ 0x29a14054,
+ 0x3c22000e,
+ 0x3c210008,
+ 0xa04b1000,
+ 0x20210300,
+ 0xb8220800,
+ 0xb82f0800,
+ 0x59c1538c,
+ 0x29a14048,
+ 0x00210004,
+ 0xa02c0800,
+ 0xb8350800,
+ 0x59c152a4,
+ 0x29a24034,
+ 0x0041000a,
+ 0x29a24038,
+ 0xa0c13000,
+ 0x3c410016,
+ 0xa02a5000,
+ 0xa0270800,
+ 0xb8ca3000,
+ 0xb8c13000,
+ 0xb8d53000,
+ 0x59c652a8,
+ 0x29a1400c,
+ 0x3c210007,
+ 0xa0280800,
+ 0xb82f0800,
+ 0x59c152ac,
+ 0x2b8b002c,
+ 0x2b8c0028,
+ 0x2b8d0024,
+ 0x2b8e0020,
+ 0x2b8f001c,
+ 0x2b900018,
+ 0x2b910014,
+ 0x2b920010,
+ 0x2b93000c,
+ 0x2b940008,
+ 0x2b950004,
+ 0x379c002c,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b8d0004,
+ 0x7801c00c,
+ 0x38210000,
+ 0x28280000,
+ 0x7806c010,
+ 0x38c60000,
+ 0x28c54034,
+ 0x7803000f,
+ 0x78010030,
+ 0x00a4000a,
+ 0x3863fff0,
+ 0x28c54038,
+ 0x38210000,
+ 0x780200c0,
+ 0x3ca50016,
+ 0xb8230800,
+ 0x38420000,
+ 0xa0a21000,
+ 0xa0240800,
+ 0x78030f00,
+ 0xb8220800,
+ 0x38630000,
+ 0x7804f000,
+ 0xa0a31800,
+ 0x38840000,
+ 0x0102000b,
+ 0xa0a42800,
+ 0xb8230800,
+ 0xb8250800,
+ 0x20420001,
+ 0x78078008,
+ 0x38e70000,
+ 0xb8220800,
+ 0x58e15564,
+ 0x28c14038,
+ 0x0103000c,
+ 0x780201e0,
+ 0x3c21000b,
+ 0x38420000,
+ 0x20630001,
+ 0xa0220800,
+ 0xb8230800,
+ 0x58e164b4,
+ 0x28c14068,
+ 0x01080015,
+ 0x780d000f,
+ 0x0021000c,
+ 0x21080001,
+ 0x2021007e,
+ 0xb8280800,
+ 0x58e15dfc,
+ 0x28c12170,
+ 0x39ad0000,
+ 0x78020003,
+ 0x3c210001,
+ 0x3842c00c,
+ 0x202107fe,
+ 0xb8230800,
+ 0x58e16460,
+ 0x28c14070,
+ 0xb4e21000,
+ 0x3804e3fc,
+ 0x3c21000d,
+ 0xb4e42000,
+ 0xa02d0800,
+ 0xb8280800,
+ 0x58410000,
+ 0x28c14070,
+ 0x78050001,
+ 0x78030300,
+ 0x00210009,
+ 0x38a50000,
+ 0x20210002,
+ 0xb8280800,
+ 0x58810000,
+ 0x28c14070,
+ 0x38630000,
+ 0x780a0003,
+ 0x3c220010,
+ 0x394a0800,
+ 0x3c210009,
+ 0xa0431000,
+ 0xa0250800,
+ 0xb8220800,
+ 0x38038900,
+ 0xb4e31800,
+ 0xb8280800,
+ 0x78024000,
+ 0x58610000,
+ 0xb4ea5000,
+ 0x38420000,
+ 0x59420000,
+ 0x28c14068,
+ 0x380598f4,
+ 0xb4e52800,
+ 0x00210003,
+ 0x7802001f,
+ 0xa02d0800,
+ 0xb8280800,
+ 0x58a10000,
+ 0x28c94068,
+ 0x38420000,
+ 0x780303e0,
+ 0x0121000b,
+ 0x38630000,
+ 0x28c9406c,
+ 0xa0220800,
+ 0x380c89bc,
+ 0x3d220015,
+ 0xb4ec6000,
+ 0x28c94070,
+ 0xa0431000,
+ 0xb8220800,
+ 0x0123000a,
+ 0x01240009,
+ 0x20620002,
+ 0xb8220800,
+ 0x20630004,
+ 0x0122000b,
+ 0xb8230800,
+ 0x20840010,
+ 0xb8240800,
+ 0x20420008,
+ 0xb8220800,
+ 0xb8280800,
+ 0x59810000,
+ 0x28c1406c,
+ 0x780303ff,
+ 0x38630000,
+ 0x3c210001,
+ 0x38028c1c,
+ 0xb4e23800,
+ 0xa0230800,
+ 0xb8280800,
+ 0x78024001,
+ 0x58e10000,
+ 0x38420000,
+ 0x59420000,
+ 0x28c14068,
+ 0x7809007f,
+ 0x780b0380,
+ 0x00210007,
+ 0x39290000,
+ 0xa02d0800,
+ 0xb8280800,
+ 0x58a10000,
+ 0x28cd406c,
+ 0x396b0000,
+ 0x7805e000,
+ 0x3da1000b,
+ 0x38a50000,
+ 0x28cd4070,
+ 0xa0230800,
+ 0x01a3000a,
+ 0x01a40009,
+ 0x20620002,
+ 0xb8220800,
+ 0x20630004,
+ 0x01a2000b,
+ 0xb8230800,
+ 0x20840010,
+ 0xb8240800,
+ 0x20420008,
+ 0xb8220800,
+ 0xb8280800,
+ 0x59810000,
+ 0x28c1406c,
+ 0x00220009,
+ 0x28c14070,
+ 0xa0491000,
+ 0x3c210017,
+ 0xa02b0800,
+ 0xb8411000,
+ 0xb8481000,
+ 0x58e20000,
+ 0x59450000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b8d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b0014,
+ 0x5b8c0010,
+ 0x5b8d000c,
+ 0x5b8e0008,
+ 0x5b9d0004,
+ 0x780cc000,
+ 0x398c0000,
+ 0x298d0014,
+ 0x7802c00c,
+ 0x38420000,
+ 0x29810010,
+ 0x7805c050,
+ 0x38a50118,
+ 0x298b0000,
+ 0x7801fff7,
+ 0x3821ffff,
+ 0x284e0000,
+ 0xa1615800,
+ 0x7803ffdf,
+ 0x28a10000,
+ 0x7802ffef,
+ 0x3842ffff,
+ 0x38210020,
+ 0x58a10000,
+ 0xa1625800,
+ 0x3863ffff,
+ 0x7801f7ff,
+ 0x28a40000,
+ 0xa1635800,
+ 0x3821ffff,
+ 0xa1615800,
+ 0x7802efff,
+ 0x3842ffff,
+ 0x7801fffe,
+ 0xa1625800,
+ 0x3821ffff,
+ 0x38840040,
+ 0xa1615800,
+ 0x58a40000,
+ 0x598b0000,
+ 0xfbfffd3d,
+ 0x78010008,
+ 0x38210000,
+ 0x78020010,
+ 0xb9615800,
+ 0x38420000,
+ 0xb9625800,
+ 0x78010020,
+ 0x38210000,
+ 0x78020800,
+ 0xb9615800,
+ 0x38420000,
+ 0xb9625800,
+ 0x01ad001e,
+ 0x78011000,
+ 0x38210000,
+ 0x78020001,
+ 0xb9615800,
+ 0x38420000,
+ 0x21ad0001,
+ 0x01ce0004,
+ 0xb9625800,
+ 0x65ad0000,
+ 0x598b0000,
+ 0x21ce0001,
+ 0x5da00003,
+ 0x5dc00002,
+ 0xfbffff04,
+ 0x2b8b0014,
+ 0x2b8c0010,
+ 0x2b8d000c,
+ 0x2b8e0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780be000,
+ 0x396b302c,
+ 0x29610000,
+ 0x38210002,
+ 0x59610000,
+ 0x2b212f4c,
+ 0x38210001,
+ 0x5b212f4c,
+ 0x34010004,
+ 0x5b2120ac,
+ 0xf8000d84,
+ 0xfbffffa6,
+ 0xf8000dbf,
+ 0x2b212f4c,
+ 0x3402fffe,
+ 0xa0220800,
+ 0x5b212f4c,
+ 0x34010000,
+ 0x5b2120ac,
+ 0x29610000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0x59610000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b0014,
+ 0x5b8c0010,
+ 0x5b8d000c,
+ 0x5b8e0008,
+ 0x5b9d0004,
+ 0x780cc000,
+ 0x398c0000,
+ 0x29820010,
+ 0x7806c050,
+ 0x38c60118,
+ 0x298b0000,
+ 0x7802c00c,
+ 0x38420000,
+ 0x284e0000,
+ 0x7803ffef,
+ 0x3863ffff,
+ 0x7802fff7,
+ 0x3842ffff,
+ 0x28c50000,
+ 0xa1625800,
+ 0x7804ffdf,
+ 0xa1635800,
+ 0x3884ffff,
+ 0x7802f7ff,
+ 0xa1645800,
+ 0x3842ffff,
+ 0x38a50020,
+ 0xa1625800,
+ 0x7803efff,
+ 0x58c50000,
+ 0x3863ffff,
+ 0x7802fffe,
+ 0x28c40000,
+ 0xa1635800,
+ 0x3842ffff,
+ 0xa1625800,
+ 0x3402ffdf,
+ 0x7803fffd,
+ 0xa1625800,
+ 0x38840040,
+ 0x3863ffff,
+ 0xa1635800,
+ 0x58c40000,
+ 0x598b0000,
+ 0x202d00ff,
+ 0xfbfffcce,
+ 0x396b0020,
+ 0x598b0000,
+ 0x45a00002,
+ 0xfbfffd15,
+ 0x78010008,
+ 0x38210000,
+ 0x78020010,
+ 0xb9615800,
+ 0x38420000,
+ 0xb9625800,
+ 0x78010020,
+ 0x38210000,
+ 0x78020800,
+ 0xb9615800,
+ 0x38420000,
+ 0x78031000,
+ 0xb9625800,
+ 0x38630000,
+ 0x78010001,
+ 0xb9635800,
+ 0x38210000,
+ 0x01c20004,
+ 0xb9615800,
+ 0x7da30000,
+ 0xa4401000,
+ 0x78010002,
+ 0xa0431000,
+ 0x38210000,
+ 0x396b8000,
+ 0xb9615800,
+ 0x64420000,
+ 0x598b0000,
+ 0x5c400002,
+ 0xfbfffe8e,
+ 0x2b8b0014,
+ 0x2b8c0010,
+ 0x2b8d000c,
+ 0x2b8e0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x379cffc8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x780fe000,
+ 0xb9e01800,
+ 0x3863302c,
+ 0x28610000,
+ 0x7802c000,
+ 0x38420000,
+ 0x38210002,
+ 0x58610000,
+ 0x284d0010,
+ 0x7801c00c,
+ 0x38210000,
+ 0x282b0000,
+ 0x378e001c,
+ 0x01ad0001,
+ 0x284c0014,
+ 0x016b0006,
+ 0x21ad0001,
+ 0x2b212f4c,
+ 0x018c001e,
+ 0x216b0001,
+ 0x38210001,
+ 0x5b212f4c,
+ 0x34010004,
+ 0x5b2120ac,
+ 0xf8000cfc,
+ 0xb9c00800,
+ 0xfbfffc3d,
+ 0x21810001,
+ 0x64220000,
+ 0x5dab0005,
+ 0x5c400002,
+ 0x34010001,
+ 0xfbffff81,
+ 0xe0000002,
+ 0xfbffff15,
+ 0xf8000d2e,
+ 0xb9c00800,
+ 0xfbfffc55,
+ 0x2b212f4c,
+ 0x3402fffe,
+ 0xb9e01800,
+ 0xa0220800,
+ 0x5b212f4c,
+ 0x34010000,
+ 0x5b2120ac,
+ 0x3863302c,
+ 0x28610000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0x58610000,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0038,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780be000,
+ 0xb9601800,
+ 0x3863302c,
+ 0x28610000,
+ 0x7802c000,
+ 0x38420000,
+ 0x38210002,
+ 0x58610000,
+ 0x28420014,
+ 0x34010001,
+ 0x0043001f,
+ 0x4c400002,
+ 0xe0000002,
+ 0xb8600800,
+ 0xfbffff56,
+ 0xb9600800,
+ 0x3821302c,
+ 0x28220000,
+ 0x3403fffd,
+ 0xa0431000,
+ 0x58220000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x78058002,
+ 0x38a50000,
+ 0x58a10000,
+ 0x78030003,
+ 0x78040003,
+ 0x58a20004,
+ 0x38638dc8,
+ 0x38848dcc,
+ 0x58610000,
+ 0x58820000,
+ 0xc3a00000,
+ 0x78028002,
+ 0x38420000,
+ 0x28410020,
+ 0x20210001,
+ 0x64210000,
+ 0x4420fffd,
+ 0xc3a00000,
+ 0x78018002,
+ 0x38210000,
+ 0x28210020,
+ 0xc3a00000,
+ 0x78058002,
+ 0x38a50000,
+ 0x28a40008,
+ 0x78030800,
+ 0x38630001,
+ 0x58830000,
+ 0x34840004,
+ 0x58810000,
+ 0x34840004,
+ 0x58820000,
+ 0x34840004,
+ 0x58a40008,
+ 0xc3a00000,
+ 0x78088002,
+ 0xb9001800,
+ 0x38630000,
+ 0x28640008,
+ 0x00420002,
+ 0x34050000,
+ 0x50a20010,
+ 0x78070003,
+ 0x78060003,
+ 0x38e78dcc,
+ 0x38c68dc8,
+ 0xb8201800,
+ 0x28610000,
+ 0x34a50001,
+ 0x58810000,
+ 0x28e10000,
+ 0x34840004,
+ 0x34630004,
+ 0x50240002,
+ 0x28c40000,
+ 0x50a20002,
+ 0xe3fffff7,
+ 0x39080000,
+ 0x59040008,
+ 0xc3a00000,
+ 0x78038002,
+ 0x38630000,
+ 0x28640008,
+ 0x34050001,
+ 0x58850000,
+ 0x34840004,
+ 0x58810000,
+ 0x34840004,
+ 0x58820000,
+ 0x34840004,
+ 0x58640008,
+ 0xc3a00000,
+ 0x58220000,
+ 0xc3a00000,
+ 0x28220000,
+ 0x28230004,
+ 0x3c420002,
+ 0x7801c200,
+ 0x38210000,
+ 0xb4411000,
+ 0x58430000,
+ 0xc3a00000,
+ 0x2063ffff,
+ 0x20420007,
+ 0x20650f00,
+ 0x3c420008,
+ 0x2021001f,
+ 0x3c21000b,
+ 0x206300ff,
+ 0xb8621800,
+ 0xb8611800,
+ 0x3ca50008,
+ 0x7801c200,
+ 0xb8651800,
+ 0x38210000,
+ 0xb8611800,
+ 0x58640000,
+ 0xc3a00000,
+ 0x28210000,
+ 0xc3a00000,
+ 0x28230000,
+ 0x7802c200,
+ 0x38420000,
+ 0x3c630002,
+ 0xb4621800,
+ 0x28620000,
+ 0x58220004,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b8c0004,
+ 0xb8205800,
+ 0xb8405000,
+ 0xb8604800,
+ 0x208400ff,
+ 0x34010000,
+ 0x50230016,
+ 0x7807c200,
+ 0x38e70000,
+ 0xe4812000,
+ 0xb8e06000,
+ 0x3c230002,
+ 0x34280001,
+ 0xb46b1000,
+ 0x3c420002,
+ 0xb46a3000,
+ 0xb8400800,
+ 0xb44c1000,
+ 0xb4272800,
+ 0x5c800004,
+ 0x28c10000,
+ 0x58a10000,
+ 0xe0000003,
+ 0x28410000,
+ 0x58c10000,
+ 0xb9000800,
+ 0x51090002,
+ 0xe3fffff0,
+ 0x2b8b0008,
+ 0x2b8c0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0xb8403800,
+ 0xb8204000,
+ 0x206300ff,
+ 0x34020000,
+ 0x50470017,
+ 0x7805c200,
+ 0x38a50000,
+ 0xe4621800,
+ 0xb8a04800,
+ 0x3c410003,
+ 0x34460001,
+ 0xb4282000,
+ 0x5c600007,
+ 0x28810000,
+ 0x28820004,
+ 0x3c210002,
+ 0xb4250800,
+ 0x58220000,
+ 0xe0000006,
+ 0x28810000,
+ 0x3c210002,
+ 0xb4290800,
+ 0x28210000,
+ 0x58810004,
+ 0xb8c01000,
+ 0x50c70002,
+ 0xe3ffffef,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x7803c020,
+ 0x38630004,
+ 0x28620000,
+ 0x202c00ff,
+ 0x7801c201,
+ 0x3842000c,
+ 0x58620000,
+ 0x3821c574,
+ 0xfbffffac,
+ 0x780b0003,
+ 0x00230016,
+ 0xb9601000,
+ 0x38428acc,
+ 0x58410038,
+ 0x20630001,
+ 0x5c60000a,
+ 0x7801c201,
+ 0x3821c574,
+ 0xfbffffa2,
+ 0x00220016,
+ 0xb9601800,
+ 0x38638acc,
+ 0x58610038,
+ 0x20420001,
+ 0x4440fff8,
+ 0x78040003,
+ 0x38848acc,
+ 0x28820034,
+ 0x21810003,
+ 0x3403ff3f,
+ 0x3c210006,
+ 0xa0431000,
+ 0xb8411000,
+ 0x7801c201,
+ 0x58820034,
+ 0x3821c570,
+ 0xfbffff76,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x7803c020,
+ 0x38630004,
+ 0x28620000,
+ 0x202c00ff,
+ 0x3401fffb,
+ 0xa0411000,
+ 0x3401fff7,
+ 0xa0411000,
+ 0x7801c201,
+ 0x58620000,
+ 0x3821c574,
+ 0xfbffff7b,
+ 0x780b0003,
+ 0x00230015,
+ 0xb9601000,
+ 0x38428acc,
+ 0x58410038,
+ 0x20630002,
+ 0x4460000a,
+ 0x7801c201,
+ 0x3821c574,
+ 0xfbffff71,
+ 0x00220015,
+ 0xb9601800,
+ 0x38638acc,
+ 0x58610038,
+ 0x20420002,
+ 0x5c40fff8,
+ 0x78040003,
+ 0x38848acc,
+ 0x28820034,
+ 0x21810003,
+ 0x3403ffe7,
+ 0x3c210003,
+ 0xa0431000,
+ 0xb8411000,
+ 0x7801c201,
+ 0x58820034,
+ 0x3821c570,
+ 0xfbffff45,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x202d00ff,
+ 0x34030001,
+ 0x204c00ff,
+ 0x7801c020,
+ 0xb8601000,
+ 0x33030778,
+ 0x38210130,
+ 0xfbffdaad,
+ 0x780ec020,
+ 0xb9c00800,
+ 0x38210004,
+ 0x282f0000,
+ 0x780b0003,
+ 0x396b8acc,
+ 0x7801c201,
+ 0x3821c574,
+ 0xfbffff42,
+ 0x29640034,
+ 0x00230015,
+ 0x59610038,
+ 0x00810003,
+ 0x00820006,
+ 0x20630002,
+ 0x20210003,
+ 0x20450003,
+ 0x5c610007,
+ 0xb9800800,
+ 0x20820003,
+ 0x49a30009,
+ 0x49a20008,
+ 0xb9a00800,
+ 0xe000000a,
+ 0xb9a00800,
+ 0x20820003,
+ 0x48ac0007,
+ 0x49820006,
+ 0xb9800800,
+ 0xfbffffa3,
+ 0xb9a00800,
+ 0xfbffff73,
+ 0xe0000004,
+ 0xfbffff71,
+ 0xb9800800,
+ 0xfbffff9d,
+ 0x39ce0004,
+ 0x34040000,
+ 0x59cf0000,
+ 0x7801c020,
+ 0x38210130,
+ 0x34020001,
+ 0xb8801800,
+ 0x33040778,
+ 0xfbffda80,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x780c0003,
+ 0xb9800800,
+ 0x38218b1c,
+ 0x43030779,
+ 0x28220000,
+ 0x206400ff,
+ 0x4301077a,
+ 0x40420005,
+ 0x202100ff,
+ 0x20230001,
+ 0x44400002,
+ 0x34030000,
+ 0xb9800800,
+ 0x38218b1c,
+ 0x28210000,
+ 0x40210006,
+ 0x5c200004,
+ 0x20810001,
+ 0xb8230800,
+ 0xe0000002,
+ 0x7c610000,
+ 0x4420002f,
+ 0xb9801000,
+ 0x38428b1c,
+ 0x28410000,
+ 0x40210007,
+ 0x3301077c,
+ 0x28410000,
+ 0x40210007,
+ 0x3301077d,
+ 0x4301077b,
+ 0x202b00ff,
+ 0x5d600010,
+ 0x28410000,
+ 0x40210004,
+ 0x4420000b,
+ 0x78030003,
+ 0x38638acc,
+ 0x2862003c,
+ 0x3404ffdf,
+ 0x7801c201,
+ 0xa0441000,
+ 0x5862003c,
+ 0x3821c588,
+ 0xfbfffecb,
+ 0x330b0782,
+ 0x34010001,
+ 0x3301077b,
+ 0x43010785,
+ 0x5c200049,
+ 0x43010787,
+ 0x202b00ff,
+ 0x5d600046,
+ 0x398c8b1c,
+ 0x29810000,
+ 0x40220001,
+ 0x40210000,
+ 0xfbffff7f,
+ 0x78020003,
+ 0x78010002,
+ 0x330b0784,
+ 0x38428b24,
+ 0x3821e2a4,
+ 0x58410028,
+ 0x330b0783,
+ 0x330b0786,
+ 0x330b0788,
+ 0xe0000037,
+ 0x43010785,
+ 0x5c20001e,
+ 0x43010787,
+ 0x202b00ff,
+ 0x5d60001b,
+ 0x4301077b,
+ 0x5c200009,
+ 0x398c8b1c,
+ 0x29810000,
+ 0x40220003,
+ 0x40210002,
+ 0xfbffff69,
+ 0x34010001,
+ 0x33010784,
+ 0xe0000007,
+ 0x398c8b1c,
+ 0x29810000,
+ 0x40220001,
+ 0x40210000,
+ 0xfbffff61,
+ 0x330b0784,
+ 0x78010003,
+ 0x78020002,
+ 0x38218b24,
+ 0x3842e2a4,
+ 0x58220028,
+ 0x34010000,
+ 0x33010783,
+ 0x33010786,
+ 0x33010788,
+ 0xe0000018,
+ 0x4301077c,
+ 0x44200016,
+ 0x4301077c,
+ 0x3421ffff,
+ 0x3301077c,
+ 0x4301077c,
+ 0x202b00ff,
+ 0x5d600010,
+ 0x398c8b1c,
+ 0x29810000,
+ 0x40210004,
+ 0x4420000b,
+ 0x78030003,
+ 0x38638acc,
+ 0x2862003c,
+ 0x7801c201,
+ 0x3821c588,
+ 0x38420020,
+ 0x5862003c,
+ 0xfbfffe81,
+ 0x34010001,
+ 0x33010782,
+ 0x330b077b,
+ 0x34010001,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x43010785,
+ 0x5c200004,
+ 0x43010787,
+ 0x202400ff,
+ 0x4480001e,
+ 0x43010785,
+ 0x78020003,
+ 0x780c0003,
+ 0x780b0002,
+ 0x4420000b,
+ 0x38428b1c,
+ 0x28410000,
+ 0x40220001,
+ 0x40210000,
+ 0xfbffff26,
+ 0x34010000,
+ 0x33010784,
+ 0x34010001,
+ 0x33010786,
+ 0xe0000009,
+ 0x38428b1c,
+ 0x28410000,
+ 0x40220003,
+ 0x40210002,
+ 0xfbffff1c,
+ 0x34010001,
+ 0x33010784,
+ 0x33010788,
+ 0x398c8b24,
+ 0x396be094,
+ 0x598b0028,
+ 0x34010005,
+ 0x33010783,
+ 0xe0000055,
+ 0x78060003,
+ 0xb8c00800,
+ 0x38218b1c,
+ 0x43030779,
+ 0x28220000,
+ 0x206500ff,
+ 0x4301077a,
+ 0x40420005,
+ 0x202100ff,
+ 0x20230001,
+ 0x44400002,
+ 0xb8801800,
+ 0xb8c00800,
+ 0x38218b1c,
+ 0x28210000,
+ 0x40210006,
+ 0x5c200005,
+ 0x20a10001,
+ 0xb8230800,
+ 0x5c200003,
+ 0xe0000022,
+ 0x44600021,
+ 0xb8c06000,
+ 0x398c8b1c,
+ 0x29810000,
+ 0x40210007,
+ 0x3301077c,
+ 0x29810000,
+ 0x40210007,
+ 0x3301077d,
+ 0x4301077b,
+ 0x202b00ff,
+ 0x5d600034,
+ 0x29810000,
+ 0x40210004,
+ 0x4420000b,
+ 0x78030003,
+ 0x38638acc,
+ 0x2862003c,
+ 0x3404ffdf,
+ 0x7801c201,
+ 0xa0441000,
+ 0x5862003c,
+ 0x3821c588,
+ 0xfbfffe25,
+ 0x330b0782,
+ 0x29810000,
+ 0x40220001,
+ 0x40210000,
+ 0xfbfffee1,
+ 0x34010001,
+ 0x3301077b,
+ 0x330b0784,
+ 0xe000001f,
+ 0x4301077c,
+ 0x4420001d,
+ 0x4301077c,
+ 0x3421ffff,
+ 0x3301077c,
+ 0x4301077c,
+ 0x202100ff,
+ 0x5c200017,
+ 0xb8c05800,
+ 0x3301077b,
+ 0x396b8b1c,
+ 0x29610000,
+ 0x40210004,
+ 0x4420000b,
+ 0x78030003,
+ 0x38638acc,
+ 0x2862003c,
+ 0x7801c201,
+ 0x3821c588,
+ 0x38420020,
+ 0x5862003c,
+ 0xfbfffe06,
+ 0x34010001,
+ 0x33010782,
+ 0x29610000,
+ 0x40220003,
+ 0x40210002,
+ 0xfbfffec1,
+ 0x34010001,
+ 0x33010784,
+ 0x34010000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b0014,
+ 0x5b8c0010,
+ 0x5b8d000c,
+ 0x5b8e0008,
+ 0x5b9d0004,
+ 0x78020003,
+ 0x3842f9d8,
+ 0x28420000,
+ 0x780d0003,
+ 0x7801c201,
+ 0x20420020,
+ 0x78070003,
+ 0x780e0003,
+ 0x78050003,
+ 0x7806c020,
+ 0x78040003,
+ 0x78030002,
+ 0x004c0005,
+ 0x39ad8b1c,
+ 0x340b0000,
+ 0x3821c570,
+ 0x39ce8acc,
+ 0x38e7f824,
+ 0x38a58ba8,
+ 0x38c60004,
+ 0x38848b24,
+ 0x3863e2a4,
+ 0x444b0039,
+ 0x330c0789,
+ 0x330c0779,
+ 0x330c077a,
+ 0x330c077f,
+ 0x29a20000,
+ 0x40420007,
+ 0x3302077c,
+ 0x29a20000,
+ 0x40420007,
+ 0x3302077d,
+ 0x330b0781,
+ 0x330b0785,
+ 0x330b0786,
+ 0x330b0787,
+ 0x330b0788,
+ 0x330c077b,
+ 0x330b0784,
+ 0x28e20000,
+ 0x58830028,
+ 0x30a2000a,
+ 0x30a20023,
+ 0x28c20000,
+ 0x00430004,
+ 0x38440014,
+ 0x3402fff7,
+ 0xa0822000,
+ 0x20630001,
+ 0x5c6b0002,
+ 0x58c40000,
+ 0xfbfffdd7,
+ 0x59c10034,
+ 0x7801c201,
+ 0x3821c588,
+ 0xfbfffdd3,
+ 0x29a30000,
+ 0x59c1003c,
+ 0x3402ffdf,
+ 0xa0222000,
+ 0x40630004,
+ 0x7801c201,
+ 0x3821c588,
+ 0xb8801000,
+ 0x44600004,
+ 0x59c4003c,
+ 0xfbfffdae,
+ 0x330b0782,
+ 0x29a10000,
+ 0x40220001,
+ 0x40210000,
+ 0xfbfffe6a,
+ 0x78020003,
+ 0x3842f818,
+ 0x28410000,
+ 0x38210400,
+ 0x58410000,
+ 0x330c078a,
+ 0x2b8b0014,
+ 0x2b8c0010,
+ 0x2b8d000c,
+ 0x2b8e0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x4301078a,
+ 0x780c0003,
+ 0x340b0000,
+ 0x398c8b1c,
+ 0x442b0026,
+ 0x330b0789,
+ 0x29820000,
+ 0x78040003,
+ 0x7801c201,
+ 0x40420004,
+ 0x38848acc,
+ 0x3821c588,
+ 0x444b0007,
+ 0x2882003c,
+ 0x3403ffdf,
+ 0xa0431000,
+ 0x5882003c,
+ 0xfbfffd86,
+ 0x330b0782,
+ 0x29810000,
+ 0x40220001,
+ 0x40210000,
+ 0xfbfffe42,
+ 0x34010001,
+ 0x3301077b,
+ 0x78010003,
+ 0x330b0784,
+ 0x38218ba8,
+ 0x78050003,
+ 0x302b000a,
+ 0x302b0023,
+ 0x38a5f818,
+ 0x28a40000,
+ 0x78030003,
+ 0x78020002,
+ 0x3401fbff,
+ 0xa0812000,
+ 0x38638b24,
+ 0x38424a68,
+ 0x58620028,
+ 0x58a40000,
+ 0x330b078a,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x7803c020,
+ 0x38630004,
+ 0x28620000,
+ 0x43010781,
+ 0x7c210001,
+ 0x5c200003,
+ 0x3842000c,
+ 0xe0000009,
+ 0x4301077f,
+ 0x5c200004,
+ 0x3401fffb,
+ 0xa0411000,
+ 0xe0000002,
+ 0x38420004,
+ 0x3401fff7,
+ 0xa0411000,
+ 0x58620000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x780cc020,
+ 0xb9801800,
+ 0x38630130,
+ 0x28620000,
+ 0x7801c200,
+ 0x3821c5f4,
+ 0x38420010,
+ 0x58620000,
+ 0x780b0003,
+ 0xfbfffd62,
+ 0x396b8acc,
+ 0x59610018,
+ 0x7801c200,
+ 0x3821c5e0,
+ 0xfbfffd5d,
+ 0x29630018,
+ 0x59610008,
+ 0x34010000,
+ 0x78040003,
+ 0x5b010150,
+ 0x38848c00,
+ 0x0063001d,
+ 0x40820018,
+ 0xb4641800,
+ 0x78010003,
+ 0x40630000,
+ 0x382185dc,
+ 0xb4411000,
+ 0x10410000,
+ 0x08630019,
+ 0x34051838,
+ 0x3c210002,
+ 0xc8a32800,
+ 0xb4a12800,
+ 0x3ca2000f,
+ 0x34010fa0,
+ 0x8c412800,
+ 0x29630008,
+ 0x398c0130,
+ 0x780103ff,
+ 0x3821fff0,
+ 0xa0610800,
+ 0x3c210006,
+ 0x2063000f,
+ 0x1421000a,
+ 0x34630001,
+ 0x94230800,
+ 0x29620014,
+ 0x2c830082,
+ 0x20420fff,
+ 0xc8411000,
+ 0x88431000,
+ 0x3c42000e,
+ 0x8c451000,
+ 0x00420001,
+ 0x0f020148,
+ 0x2b01014c,
+ 0xb4220800,
+ 0x5b01014c,
+ 0x2f01014a,
+ 0x34210001,
+ 0x0f01014a,
+ 0x43010830,
+ 0x4420000b,
+ 0x43010831,
+ 0x14a20003,
+ 0x7c210010,
+ 0x5c200007,
+ 0x2b0108b8,
+ 0xb4220800,
+ 0x5b0108b8,
+ 0x2b010914,
+ 0x34210001,
+ 0x5b010914,
+ 0x29810000,
+ 0x3402ffef,
+ 0xa0220800,
+ 0x59810000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x202100ff,
+ 0x7c210001,
+ 0x5c20002c,
+ 0x34040000,
+ 0xb4840800,
+ 0xb4380800,
+ 0x34030000,
+ 0x34840001,
+ 0x0c230128,
+ 0x74820007,
+ 0x0c230138,
+ 0x4443fff9,
+ 0x0f030148,
+ 0x0f03014a,
+ 0x7801c202,
+ 0x5b03014c,
+ 0x3821c450,
+ 0xfbfffd05,
+ 0x78020003,
+ 0x38428acc,
+ 0x58410014,
+ 0x78038000,
+ 0x38638000,
+ 0x34010010,
+ 0x58610054,
+ 0x34010001,
+ 0xf8001194,
+ 0x78010003,
+ 0x78030003,
+ 0x3821f830,
+ 0x3863f900,
+ 0x28220000,
+ 0x28630000,
+ 0x34010001,
+ 0x88431000,
+ 0x34030064,
+ 0x34420032,
+ 0x8c431000,
+ 0xf800119d,
+ 0x34010024,
+ 0xfbffcb6c,
+ 0x78020003,
+ 0x3842f818,
+ 0x28410000,
+ 0x38211000,
+ 0xe000000e,
+ 0x78018000,
+ 0x34020010,
+ 0x38218000,
+ 0x58220054,
+ 0x34010024,
+ 0xfbffcb8e,
+ 0x34010001,
+ 0xf8001184,
+ 0x78020003,
+ 0x3842f818,
+ 0x28410000,
+ 0x3403efff,
+ 0xa0230800,
+ 0x58410000,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0xc3a00000,
+ 0xc3a00000,
+ 0x379cffe4,
+ 0x5b8b001c,
+ 0x5b8c0018,
+ 0x5b8d0014,
+ 0x5b8e0010,
+ 0x5b8f000c,
+ 0x5b900008,
+ 0x5b9d0004,
+ 0x90006000,
+ 0x34010000,
+ 0xd0010000,
+ 0x7801c200,
+ 0x3821c5c4,
+ 0x780b0003,
+ 0x396b8acc,
+ 0xfbfffcc6,
+ 0x59610000,
+ 0xd00c0000,
+ 0x78100003,
+ 0xba001800,
+ 0x38638acc,
+ 0x40610000,
+ 0x44200082,
+ 0x2861000c,
+ 0x780f001f,
+ 0x780e0010,
+ 0x00240010,
+ 0x28630000,
+ 0xb9e00800,
+ 0x3821ffff,
+ 0xa0616000,
+ 0x7802fff0,
+ 0xb9c00800,
+ 0x38420000,
+ 0x38210000,
+ 0x208400ff,
+ 0xa1810800,
+ 0xb9821800,
+ 0x5c200002,
+ 0xb9801800,
+ 0xba005800,
+ 0x396b8acc,
+ 0x41650000,
+ 0x2b0102cc,
+ 0x780d0003,
+ 0x88851000,
+ 0xc8616000,
+ 0xb9a01800,
+ 0xc84c6000,
+ 0x6d810000,
+ 0x38638c00,
+ 0xc8010800,
+ 0xa1816000,
+ 0x3d8c0007,
+ 0x2c620082,
+ 0x8d850800,
+ 0x34040010,
+ 0x39ce0000,
+ 0x88220800,
+ 0x34210100,
+ 0x00210009,
+ 0x0f0102c4,
+ 0x2f0102c4,
+ 0x2f0206a0,
+ 0x2021ffff,
+ 0x2f0302b0,
+ 0x2042ffff,
+ 0x2063ffff,
+ 0xfbffce3f,
+ 0x0f0106a0,
+ 0x2b020198,
+ 0x7801c201,
+ 0x3821c40c,
+ 0x3162000d,
+ 0x2962000c,
+ 0xfbfffc70,
+ 0x78050003,
+ 0x38a5fa64,
+ 0x28a40000,
+ 0x7802fffe,
+ 0x38420001,
+ 0x2b030198,
+ 0x78010001,
+ 0x3821fffe,
+ 0x3c630001,
+ 0xa0822000,
+ 0x29660000,
+ 0xa0611800,
+ 0xb9e01000,
+ 0x3842ffff,
+ 0x7801fff0,
+ 0xa0c23000,
+ 0xb8832000,
+ 0x38210000,
+ 0x58a40000,
+ 0xa0ce1000,
+ 0xb8c11800,
+ 0x5c400002,
+ 0xb8c01800,
+ 0x2b01069c,
+ 0x7c210002,
+ 0x5c20001e,
+ 0x34010000,
+ 0x4c23001f,
+ 0x39ad8c00,
+ 0x41a30045,
+ 0x78010003,
+ 0x38218bf8,
+ 0xb4611800,
+ 0x40640000,
+ 0xba002800,
+ 0x38a58acc,
+ 0x28a20000,
+ 0xb9e01800,
+ 0x3863ffff,
+ 0xa0430800,
+ 0x88246000,
+ 0x7801ffe0,
+ 0x158c0007,
+ 0x38210000,
+ 0xa0411000,
+ 0xa1831800,
+ 0xb8431000,
+ 0x7801c200,
+ 0x3821c5c4,
+ 0x58a20000,
+ 0xfbfffc3d,
+ 0x34010001,
+ 0x5b01069c,
+ 0x5b0c02cc,
+ 0xe0000005,
+ 0x2b01069c,
+ 0x34210001,
+ 0x5b01069c,
+ 0x5b0302cc,
+ 0x2f010240,
+ 0x78030003,
+ 0x3863f9b0,
+ 0x2021ffff,
+ 0x00210008,
+ 0x78020003,
+ 0x08210083,
+ 0x3842f9b4,
+ 0x34210100,
+ 0x00210009,
+ 0x0f0102ca,
+ 0x2f0102c4,
+ 0x2021ffff,
+ 0x58610000,
+ 0x2f0102ca,
+ 0x2021ffff,
+ 0x58410000,
+ 0x34010000,
+ 0x2b8b001c,
+ 0x2b8c0018,
+ 0x2b8d0014,
+ 0x2b8e0010,
+ 0x2b8f000c,
+ 0x2b900008,
+ 0x2b9d0004,
+ 0x379c001c,
+ 0xc3a00000,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x38218c00,
+ 0x40220099,
+ 0xb8205800,
+ 0x5c400003,
+ 0x780b0003,
+ 0x396bfa80,
+ 0x7801c210,
+ 0x38210034,
+ 0x28220000,
+ 0x780c0003,
+ 0xb9801800,
+ 0x3863fa64,
+ 0x28610000,
+ 0x20420001,
+ 0x64420000,
+ 0x38210001,
+ 0x58610000,
+ 0x34060000,
+ 0x44460016,
+ 0x7801c200,
+ 0x3821c5f0,
+ 0xfbfffc18,
+ 0x00220001,
+ 0x00230003,
+ 0x00240005,
+ 0x20420001,
+ 0x20630001,
+ 0x00250007,
+ 0x64460000,
+ 0x64630000,
+ 0x20840001,
+ 0x64840000,
+ 0x20a50001,
+ 0xb4c33000,
+ 0x64a50000,
+ 0x78020003,
+ 0xb4c43000,
+ 0x38428acc,
+ 0x5841004c,
+ 0xb4c53000,
+ 0xb9802000,
+ 0x3884fa64,
+ 0x28820000,
+ 0x7801ffe1,
+ 0x3821ffff,
+ 0x3cc30011,
+ 0xa0411000,
+ 0xb8431000,
+ 0x58820000,
+ 0x2b02017c,
+ 0x3cc30004,
+ 0x2b010178,
+ 0xc8621000,
+ 0xb4220800,
+ 0x5b010178,
+ 0x2b020184,
+ 0x2b010180,
+ 0xc8621800,
+ 0xb4230800,
+ 0x5b010180,
+ 0x43010779,
+ 0x7c210001,
+ 0x5c200004,
+ 0x2b010188,
+ 0x34210100,
+ 0x5b010188,
+ 0x2b010188,
+ 0x2b02018c,
+ 0xc8220800,
+ 0x5b010188,
+ 0x2b020178,
+ 0x4301019c,
+ 0x3c420002,
+ 0x202100ff,
+ 0x8c411000,
+ 0x5b02017c,
+ 0x4301019f,
+ 0x2b02017c,
+ 0x202100ff,
+ 0x50410003,
+ 0x416100b5,
+ 0xe0000008,
+ 0x430101a0,
+ 0x2b02017c,
+ 0x202100ff,
+ 0x50410003,
+ 0x416100b6,
+ 0xe0000002,
+ 0x416100b4,
+ 0x5b010190,
+ 0x4301019d,
+ 0x2b020180,
+ 0x202100ff,
+ 0x8c411000,
+ 0x5b020184,
+ 0x430101a2,
+ 0x2b020184,
+ 0x202100ff,
+ 0x50220003,
+ 0x416100b4,
+ 0xe0000008,
+ 0x430101a1,
+ 0x2b020184,
+ 0x202100ff,
+ 0x50220003,
+ 0x416100b6,
+ 0xe0000002,
+ 0x416100b5,
+ 0x5b010194,
+ 0x2b020190,
+ 0x2b010194,
+ 0x50220003,
+ 0x2b010194,
+ 0xe0000002,
+ 0x2b010190,
+ 0x5b010198,
+ 0x2b020188,
+ 0x4301019e,
+ 0x3c420002,
+ 0x202100ff,
+ 0x8c411000,
+ 0x5b02018c,
+ 0x430101a3,
+ 0x2b02018c,
+ 0x202100ff,
+ 0x50410009,
+ 0x2f0101a4,
+ 0x2b020198,
+ 0x2021ffff,
+ 0x88411000,
+ 0x5b020198,
+ 0x2b010198,
+ 0x00210007,
+ 0x5b010198,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cffe0,
+ 0x5b8b0020,
+ 0x5b8c001c,
+ 0x5b8d0018,
+ 0x5b8e0014,
+ 0x5b8f0010,
+ 0x5b90000c,
+ 0x5b910008,
+ 0x5b9d0004,
+ 0x78020003,
+ 0x38428c00,
+ 0x40430099,
+ 0x202b00ff,
+ 0x5c600003,
+ 0x78020003,
+ 0x3842fa80,
+ 0x2c410032,
+ 0x780d0003,
+ 0x780c0003,
+ 0x3c210008,
+ 0x340203e8,
+ 0xf80022a1,
+ 0x0f0102ee,
+ 0x34010001,
+ 0x5b01069c,
+ 0x780e0003,
+ 0x78100003,
+ 0x780f8000,
+ 0x78110003,
+ 0x4560005c,
+ 0x7801c201,
+ 0x3821c2b4,
+ 0xfbfffb82,
+ 0x78020200,
+ 0x38420000,
+ 0xb8221000,
+ 0x7801c201,
+ 0x3821c2b4,
+ 0xfbfffb62,
+ 0x78010003,
+ 0x340b0000,
+ 0x3821f9b0,
+ 0x78020003,
+ 0x582b0004,
+ 0x582b0000,
+ 0x3842f998,
+ 0x584b0000,
+ 0x0f0b02c4,
+ 0x0f0b02c0,
+ 0x0f0b02ca,
+ 0x0f0b02c8,
+ 0x5b0b02cc,
+ 0x0f0b02c4,
+ 0x0f0b0300,
+ 0x0f0b02fc,
+ 0x0f0b0302,
+ 0x7801c201,
+ 0x0f0b02fe,
+ 0x3821c40c,
+ 0xfbfffb67,
+ 0xb9a01800,
+ 0x38638c00,
+ 0x406200b7,
+ 0x398c8acc,
+ 0x5981000c,
+ 0x3302019c,
+ 0x406100b8,
+ 0x78050003,
+ 0x38a5f82c,
+ 0x3301019d,
+ 0x406100b9,
+ 0xba003000,
+ 0x38c68ba8,
+ 0x3301019e,
+ 0x406100ba,
+ 0x78040002,
+ 0x3884e994,
+ 0x3301019f,
+ 0x406100bb,
+ 0x39ce8b24,
+ 0x39ef8000,
+ 0x330101a0,
+ 0x406200bc,
+ 0x34010002,
+ 0x330201a1,
+ 0x406200bd,
+ 0x330201a2,
+ 0x406200be,
+ 0x330201a3,
+ 0x2c6200c0,
+ 0x59c40024,
+ 0x0f0201a4,
+ 0x5b0b0178,
+ 0x5b0b017c,
+ 0x5b0b0180,
+ 0x5b0b0184,
+ 0x5b0b0188,
+ 0x5b0b018c,
+ 0x28a20000,
+ 0x30c20009,
+ 0x30c20022,
+ 0x34020100,
+ 0x59e20054,
+ 0xf8000fd3,
+ 0x78010003,
+ 0x3821f900,
+ 0x28220000,
+ 0x34030064,
+ 0x084200c8,
+ 0x34010002,
+ 0x34420032,
+ 0x8c431000,
+ 0xf8000fdf,
+ 0x34010028,
+ 0xfbffc9ae,
+ 0xba201000,
+ 0x3842f818,
+ 0x28410000,
+ 0x38210100,
+ 0x58410000,
+ 0xe0000028,
+ 0x39ad8c00,
+ 0x41ad00aa,
+ 0xb9801000,
+ 0x38428acc,
+ 0x304d000d,
+ 0x2842000c,
+ 0x7801c201,
+ 0x3821c40c,
+ 0xfbfffb07,
+ 0x78010002,
+ 0x38214a68,
+ 0x39ce8b24,
+ 0xba001000,
+ 0x38428ba8,
+ 0x59c10024,
+ 0x304b0009,
+ 0x304b0022,
+ 0x34010100,
+ 0x39ef8000,
+ 0x59e10054,
+ 0x34010028,
+ 0xfbffc9bf,
+ 0x34010002,
+ 0xf8000fb5,
+ 0xba202000,
+ 0x3884f818,
+ 0x28820000,
+ 0x3403feff,
+ 0x7801c201,
+ 0xa0431000,
+ 0x58820000,
+ 0x3821c2b4,
+ 0xfbfffb09,
+ 0x7802fdff,
+ 0x3842ffff,
+ 0xa0221000,
+ 0x7801c201,
+ 0x3821c2b4,
+ 0xfbfffae9,
+ 0x2b8b0020,
+ 0x2b8c001c,
+ 0x2b8d0018,
+ 0x2b8e0014,
+ 0x2b8f0010,
+ 0x2b90000c,
+ 0x2b910008,
+ 0x2b9d0004,
+ 0x379c0020,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b0014,
+ 0x5b8c0010,
+ 0x5b8d000c,
+ 0x5b8e0008,
+ 0x5b9d0004,
+ 0x90007000,
+ 0x34010000,
+ 0xd0010000,
+ 0x2b0d007c,
+ 0x7da10001,
+ 0x5c20004c,
+ 0x340c0000,
+ 0x7801c201,
+ 0x5b0c007c,
+ 0x3821c45c,
+ 0x780b0003,
+ 0xfbfffae7,
+ 0x396b8acc,
+ 0x59610040,
+ 0xb8201800,
+ 0x43010698,
+ 0x3402fffc,
+ 0xa0621800,
+ 0x20210003,
+ 0xb8611800,
+ 0x59630040,
+ 0x43020699,
+ 0x3401ff7f,
+ 0xa0611800,
+ 0x20420001,
+ 0x3c420007,
+ 0x7801c201,
+ 0xb8621800,
+ 0xb8601000,
+ 0x59630040,
+ 0x3821c45c,
+ 0xfbfffab9,
+ 0x7801c201,
+ 0x3821c570,
+ 0xfbfffad0,
+ 0x59610034,
+ 0x4303069a,
+ 0xb8201000,
+ 0x3401f1ff,
+ 0x20630007,
+ 0x3c630009,
+ 0xa0411000,
+ 0xb8431000,
+ 0x7801c201,
+ 0x59620034,
+ 0x3821c570,
+ 0xfbfffaaa,
+ 0x78010003,
+ 0x3821f900,
+ 0x28230000,
+ 0x28220004,
+ 0x88431000,
+ 0xb9800800,
+ 0x34030064,
+ 0x34420032,
+ 0x8c431000,
+ 0xf8000f67,
+ 0x2b010080,
+ 0x20218000,
+ 0x442c0002,
+ 0xfbfff0ed,
+ 0x2b010080,
+ 0x20211000,
+ 0x44200003,
+ 0xb9a00800,
+ 0xfbfffd99,
+ 0x2b010080,
+ 0x20214000,
+ 0x44200002,
+ 0xf8000126,
+ 0x2b010080,
+ 0x20210100,
+ 0x44200003,
+ 0xb9a00800,
+ 0xfbffff06,
+ 0x2b010080,
+ 0x00210017,
+ 0x20210001,
+ 0x64210000,
+ 0x5c200002,
+ 0xf8000cb9,
+ 0xd00e0000,
+ 0x2b8b0014,
+ 0x2b8c0010,
+ 0x2b8d000c,
+ 0x2b8e0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0x90006800,
+ 0x34010000,
+ 0xd0010000,
+ 0x2b0c007c,
+ 0x5d80004c,
+ 0x34020001,
+ 0x7801c201,
+ 0x5b02007c,
+ 0x3821c45c,
+ 0x780b0003,
+ 0xfbfffa8a,
+ 0x396b8acc,
+ 0x59610040,
+ 0x20210003,
+ 0x33010698,
+ 0x29620040,
+ 0x7801c201,
+ 0x3821c45c,
+ 0x00420007,
+ 0x20420001,
+ 0x33020699,
+ 0x29630040,
+ 0x3402fffc,
+ 0xa0621800,
+ 0x3402ff7f,
+ 0xa0621800,
+ 0xb8601000,
+ 0x59630040,
+ 0xfbfffa5e,
+ 0x7801c201,
+ 0x3821c570,
+ 0xfbfffa75,
+ 0x00220009,
+ 0x59610034,
+ 0x20420007,
+ 0x3302069a,
+ 0x29620034,
+ 0x3403f1ff,
+ 0x7801c201,
+ 0xa0431000,
+ 0x3821c570,
+ 0x59620034,
+ 0xfbfffa50,
+ 0x78010003,
+ 0x3821f818,
+ 0x28210000,
+ 0x5b010080,
+ 0x2b010080,
+ 0x00210017,
+ 0x20210001,
+ 0x64210000,
+ 0x5c200002,
+ 0xf8000cae,
+ 0x2b010080,
+ 0x20210100,
+ 0x44200003,
+ 0xb9800800,
+ 0xfbfffeb9,
+ 0x2b010080,
+ 0x20214000,
+ 0x44200002,
+ 0xf8000047,
+ 0x2b010080,
+ 0x20211000,
+ 0x44200003,
+ 0xb9800800,
+ 0xfbfffd3a,
+ 0x2b010080,
+ 0x20218000,
+ 0x44200002,
+ 0xfbffefd4,
+ 0x78010003,
+ 0x3821f900,
+ 0x28220000,
+ 0x34030064,
+ 0x08421388,
+ 0xb9800800,
+ 0x34420032,
+ 0x8c431000,
+ 0xf8000ef2,
+ 0xd00d0000,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x78050003,
+ 0x34030000,
+ 0x38a5f910,
+ 0xb8602000,
+ 0xb4a40800,
+ 0x40210000,
+ 0x3422ffff,
+ 0x7441000c,
+ 0x5c200020,
+ 0x3c410002,
+ 0x78020003,
+ 0x384285e8,
+ 0xb4220800,
+ 0x28210000,
+ 0xc0200000,
+ 0x34630001,
+ 0xe0000018,
+ 0x34630002,
+ 0xe0000016,
+ 0x34630003,
+ 0xe0000014,
+ 0x34630004,
+ 0xe0000012,
+ 0x34630005,
+ 0xe0000010,
+ 0x34630006,
+ 0xe000000e,
+ 0x34630007,
+ 0xe000000c,
+ 0x34630008,
+ 0xe000000a,
+ 0x34630009,
+ 0xe0000008,
+ 0x3463000a,
+ 0xe0000006,
+ 0x3463000b,
+ 0xe0000004,
+ 0x3463000c,
+ 0xe0000002,
+ 0x3463000d,
+ 0x34840001,
+ 0x74810007,
+ 0x4420ffda,
+ 0x5b03011c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x78040003,
+ 0x78030002,
+ 0x78020003,
+ 0x34010000,
+ 0x38428ba8,
+ 0x38848b24,
+ 0x38634a68,
+ 0x58830010,
+ 0x30410004,
+ 0x3041001d,
+ 0x330102b8,
+ 0xb8205800,
+ 0x33010159,
+ 0x7801c020,
+ 0xb9601800,
+ 0x330b06e5,
+ 0x38210134,
+ 0x34020020,
+ 0xfbffd55d,
+ 0x78010003,
+ 0x38218acc,
+ 0x7802c201,
+ 0x582b0020,
+ 0x3842c43c,
+ 0x78030003,
+ 0x584b0000,
+ 0x3863f818,
+ 0x28610000,
+ 0x3402bfff,
+ 0xa0220800,
+ 0x58610000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x90001800,
+ 0x34010000,
+ 0xd0010000,
+ 0x2f01014a,
+ 0x34040000,
+ 0x44240008,
+ 0x2f01014a,
+ 0x2b02014c,
+ 0x2021ffff,
+ 0x8c411000,
+ 0x0f02015c,
+ 0x5b04014c,
+ 0x0f04014a,
+ 0xd0030000,
+ 0x2f01015c,
+ 0x780b0003,
+ 0x396b8c00,
+ 0x2f02015a,
+ 0x41630044,
+ 0x34040008,
+ 0x2042ffff,
+ 0x2021ffff,
+ 0xfbffcb7e,
+ 0x0f01015a,
+ 0x2f020244,
+ 0x378c0010,
+ 0x34040008,
+ 0x2f010246,
+ 0x34030000,
+ 0x2042ffff,
+ 0x2021ffff,
+ 0x54410002,
+ 0x34030001,
+ 0xb4630800,
+ 0xb4380800,
+ 0x34210240,
+ 0x2c210004,
+ 0x0f010160,
+ 0x2f010160,
+ 0x41630044,
+ 0x2f02015e,
+ 0x2021ffff,
+ 0x2042ffff,
+ 0xfbffcb69,
+ 0x0f01015e,
+ 0x43010158,
+ 0xb9802800,
+ 0x5c200003,
+ 0xfbffffa6,
+ 0xe0000028,
+ 0x43010154,
+ 0x41640047,
+ 0x33810010,
+ 0x43010155,
+ 0x33810011,
+ 0x430102b8,
+ 0x33810012,
+ 0x2f01015a,
+ 0x2f020162,
+ 0x2021ffff,
+ 0x2f030166,
+ 0x2042ffff,
+ 0x2063ffff,
+ 0xfbffcbd6,
+ 0x43810010,
+ 0xb9802800,
+ 0x33010154,
+ 0x43810011,
+ 0x33010155,
+ 0x43810012,
+ 0x330102b8,
+ 0x43010156,
+ 0x41640047,
+ 0x33810010,
+ 0x43010157,
+ 0x33810011,
+ 0x2f01015e,
+ 0x2f020164,
+ 0x2021ffff,
+ 0x2f030168,
+ 0x2042ffff,
+ 0x2063ffff,
+ 0xfbffcbe8,
+ 0x43810010,
+ 0x33010156,
+ 0x43810011,
+ 0x33010157,
+ 0x43810013,
+ 0x330106e5,
+ 0x34010000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x7801c201,
+ 0x3821c43c,
+ 0x28230000,
+ 0x78020003,
+ 0x38428acc,
+ 0x38630001,
+ 0x78010003,
+ 0x58430020,
+ 0x3821f82c,
+ 0x28250000,
+ 0x78040003,
+ 0x78030002,
+ 0x780100ff,
+ 0x38210000,
+ 0xa0a12800,
+ 0x00a50010,
+ 0x78010003,
+ 0x38218ba8,
+ 0x3863f540,
+ 0x38848b24,
+ 0x780b0003,
+ 0x780c0003,
+ 0x58830010,
+ 0x30250004,
+ 0x3025001d,
+ 0x398c8c00,
+ 0x396bfa04,
+ 0x2d610002,
+ 0x2d83003e,
+ 0x34020064,
+ 0x50610002,
+ 0xb8600800,
+ 0x0f010162,
+ 0x2f010162,
+ 0x2021ffff,
+ 0x3c210008,
+ 0xf8002073,
+ 0x0f010162,
+ 0x2d610000,
+ 0x2d830040,
+ 0x34020064,
+ 0x50610002,
+ 0xb8600800,
+ 0x0f010164,
+ 0x2f010164,
+ 0x2021ffff,
+ 0x3c210008,
+ 0xf8002068,
+ 0x0f010164,
+ 0x2f010162,
+ 0x41820042,
+ 0x34040001,
+ 0x2021ffff,
+ 0x88220800,
+ 0x78030003,
+ 0x3863f818,
+ 0x14210008,
+ 0x0f010166,
+ 0x2f010164,
+ 0x41820043,
+ 0x2021ffff,
+ 0x88220800,
+ 0x14210008,
+ 0x0f010168,
+ 0x33040158,
+ 0x33040159,
+ 0x28610000,
+ 0x38214000,
+ 0x58610000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x78040003,
+ 0x3884f000,
+ 0x408102f4,
+ 0x44200017,
+ 0x7801c050,
+ 0x382100b4,
+ 0x28210000,
+ 0x78020003,
+ 0x38428dd0,
+ 0x20217f00,
+ 0x00210008,
+ 0x34030001,
+ 0x58410000,
+ 0x330306fa,
+ 0x408302f5,
+ 0x28410000,
+ 0x54610002,
+ 0xc3a00000,
+ 0x2062007f,
+ 0x7801c050,
+ 0x382100cc,
+ 0x7803c050,
+ 0x58220000,
+ 0x386300d0,
+ 0x28610000,
+ 0x4420ffff,
+ 0xc3a00000,
+ 0x78010003,
+ 0x3821f000,
+ 0x402102f4,
+ 0x4420000e,
+ 0x78010003,
+ 0x38218dd0,
+ 0x28220000,
+ 0x7803c050,
+ 0x386300d0,
+ 0x7801c050,
+ 0x382100cc,
+ 0x2042007f,
+ 0x58220000,
+ 0x28610000,
+ 0x4420ffff,
+ 0x34010000,
+ 0x330106fa,
+ 0xc3a00000,
+ 0xc3a00000,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x3821029c,
+ 0x28210000,
+ 0x20210008,
+ 0x44200037,
+ 0x43010112,
+ 0x5c200004,
+ 0x43010111,
+ 0x20210002,
+ 0x44200002,
+ 0x34010001,
+ 0x7806c050,
+ 0x33010921,
+ 0x38c601c8,
+ 0x28c40000,
+ 0x7802f8ff,
+ 0x78030700,
+ 0x43010111,
+ 0x3842ffff,
+ 0x38630000,
+ 0x3c210018,
+ 0xa0822000,
+ 0xa0230800,
+ 0xb8812000,
+ 0x7805c050,
+ 0x58c40000,
+ 0x38a50118,
+ 0x28a30000,
+ 0x3402fbff,
+ 0x7806c050,
+ 0x43010112,
+ 0xa0621800,
+ 0x38c600e4,
+ 0x3c21000a,
+ 0x78040002,
+ 0x20210400,
+ 0xb8611800,
+ 0x58a30000,
+ 0x28c30000,
+ 0x3401ff80,
+ 0x78050002,
+ 0x43020110,
+ 0xa0611800,
+ 0x38a520dc,
+ 0x2042007f,
+ 0xb8621800,
+ 0x58c30000,
+ 0xb7251000,
+ 0x340100ff,
+ 0x58410000,
+ 0x388420d0,
+ 0xb7241000,
+ 0x7803c020,
+ 0x34010002,
+ 0x58410000,
+ 0x3863029c,
+ 0x28610000,
+ 0x20210008,
+ 0x5c20fffe,
+ 0xc3a00000,
+ 0x7805c020,
+ 0x38a5029c,
+ 0x28a10000,
+ 0x20210008,
+ 0x5c200028,
+ 0x34020001,
+ 0x7801c050,
+ 0x33020921,
+ 0x382101c8,
+ 0x28220000,
+ 0x7804c050,
+ 0xb8801800,
+ 0x78010700,
+ 0x38210000,
+ 0xa0411000,
+ 0x00420018,
+ 0x7801c050,
+ 0x33020111,
+ 0x38210118,
+ 0x28210000,
+ 0x386300e4,
+ 0x78020002,
+ 0x20210400,
+ 0x0021000a,
+ 0x384220dc,
+ 0x33010112,
+ 0x28610000,
+ 0xb7221000,
+ 0x2021007f,
+ 0x33010110,
+ 0x340100ff,
+ 0x78030002,
+ 0x58410000,
+ 0x386320d0,
+ 0xb7231000,
+ 0x34010001,
+ 0x58410000,
+ 0xb8a01000,
+ 0x28410000,
+ 0x20210008,
+ 0x4420fffe,
+ 0x388400e4,
+ 0x34010000,
+ 0x58810000,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x3821029c,
+ 0x28210000,
+ 0x20210004,
+ 0x4420004f,
+ 0x430100a0,
+ 0x5c200004,
+ 0x4301009e,
+ 0x20210002,
+ 0x44200002,
+ 0x34010001,
+ 0x3301091b,
+ 0x430100a1,
+ 0x5c200004,
+ 0x4301009f,
+ 0x20210002,
+ 0x44200002,
+ 0x34010001,
+ 0x3301091c,
+ 0x430200a2,
+ 0x7801c050,
+ 0x382100a4,
+ 0x204200ff,
+ 0x7805c050,
+ 0x58220000,
+ 0x38a501c8,
+ 0x28a30000,
+ 0x34028fff,
+ 0x7806c050,
+ 0x4301009e,
+ 0xa0621800,
+ 0x38c60118,
+ 0x3c21000c,
+ 0x3402ffef,
+ 0x20217000,
+ 0xb8611800,
+ 0x58a30000,
+ 0x28c30000,
+ 0x7804c050,
+ 0x3884009c,
+ 0x430100a0,
+ 0xa0621800,
+ 0x3802e3e0,
+ 0x3c210004,
+ 0xb7223800,
+ 0x20210010,
+ 0xb8611800,
+ 0x58c30000,
+ 0x430100a3,
+ 0x202100ff,
+ 0x58810000,
+ 0x28a30000,
+ 0x3401f1ff,
+ 0x4302009f,
+ 0xa0611800,
+ 0x3801e3e8,
+ 0x3c420009,
+ 0xb7212000,
+ 0x20420e00,
+ 0xb8621800,
+ 0x58a30000,
+ 0x28c30000,
+ 0x3402fff7,
+ 0x430100a1,
+ 0xa0621800,
+ 0x3c210003,
+ 0x20210008,
+ 0xb8611800,
+ 0x58c30000,
+ 0x340106ff,
+ 0x58e10000,
+ 0x28810000,
+ 0x64210010,
+ 0x4420fffe,
+ 0x3801e3ec,
+ 0xb7211000,
+ 0x28410000,
+ 0x64210010,
+ 0x4420fffe,
+ 0x3801e3f0,
+ 0xb7211000,
+ 0x34010000,
+ 0x58410000,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x3821029c,
+ 0x28210000,
+ 0x20210004,
+ 0x5c200036,
+ 0x3801e3f0,
+ 0xb7211000,
+ 0x34010001,
+ 0x58410000,
+ 0x3301091b,
+ 0x7806c050,
+ 0x3301091c,
+ 0x38c600a4,
+ 0x28c10000,
+ 0x7803c050,
+ 0x386301c8,
+ 0x2021007f,
+ 0x330100a2,
+ 0x28610000,
+ 0x7804c050,
+ 0x38840118,
+ 0x20217000,
+ 0x0021000c,
+ 0x7805c050,
+ 0x3301009e,
+ 0x28810000,
+ 0x38a5009c,
+ 0x34070000,
+ 0x20210010,
+ 0x00210004,
+ 0x3802e3e0,
+ 0x330100a0,
+ 0x28a10000,
+ 0xb7224000,
+ 0x3802e3e8,
+ 0x2021007f,
+ 0x330100a3,
+ 0x28610000,
+ 0xb7221000,
+ 0x20210e00,
+ 0x00210009,
+ 0x3301009f,
+ 0x28810000,
+ 0x20210008,
+ 0x00210003,
+ 0x330100a1,
+ 0x58c70000,
+ 0x58a70000,
+ 0x340105ff,
+ 0x59010000,
+ 0x28410000,
+ 0x64210012,
+ 0x4420fffe,
+ 0x3801e3ec,
+ 0xb7211000,
+ 0x28410000,
+ 0x64210012,
+ 0x4420fffe,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x3821029c,
+ 0x28210000,
+ 0x20210002,
+ 0x44200038,
+ 0x430100c7,
+ 0x5c200004,
+ 0x430100c6,
+ 0x20210002,
+ 0x44200002,
+ 0x34010001,
+ 0x3301091a,
+ 0x430200c8,
+ 0x7801c050,
+ 0x382100ac,
+ 0x204200ff,
+ 0x7804c050,
+ 0x58220000,
+ 0x388401c8,
+ 0x28830000,
+ 0x3401fff8,
+ 0x7805c050,
+ 0x430200c6,
+ 0xa0611800,
+ 0x38a50118,
+ 0x20420007,
+ 0xb8621800,
+ 0x58830000,
+ 0x28a30000,
+ 0x3401fffe,
+ 0x78040002,
+ 0x430200c7,
+ 0xa0611800,
+ 0x38841fe0,
+ 0x20420001,
+ 0xb8621800,
+ 0x58a30000,
+ 0x78060002,
+ 0xb7241000,
+ 0xb8c01800,
+ 0x340106ff,
+ 0x38631fe8,
+ 0x780400ff,
+ 0x58410000,
+ 0xb7231000,
+ 0x3884ffff,
+ 0x28410000,
+ 0xa0240800,
+ 0x64210010,
+ 0x4420fffd,
+ 0x78010002,
+ 0x38211ff0,
+ 0xb7211000,
+ 0x28410000,
+ 0x64210010,
+ 0x4420fffe,
+ 0x38c61fe8,
+ 0xb7261000,
+ 0x34010000,
+ 0x58410000,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x3821029c,
+ 0x28210000,
+ 0x20210002,
+ 0x5c20002e,
+ 0x34010001,
+ 0x3301091a,
+ 0x7805c050,
+ 0xb8a00800,
+ 0x382100ac,
+ 0x28210000,
+ 0x7802c050,
+ 0x384201c8,
+ 0x2021007f,
+ 0x330100c8,
+ 0x28410000,
+ 0x78040002,
+ 0x38841fe8,
+ 0x20210007,
+ 0x7802c050,
+ 0x330100c6,
+ 0x38420118,
+ 0x28410000,
+ 0x78030002,
+ 0x38631fe0,
+ 0x20210001,
+ 0x330100c7,
+ 0x78020100,
+ 0x38420000,
+ 0xb7240800,
+ 0x58220000,
+ 0xb7231000,
+ 0x340105ff,
+ 0x780300ff,
+ 0x58410000,
+ 0xb7241000,
+ 0x3863ffff,
+ 0x28410000,
+ 0xa0230800,
+ 0x64210012,
+ 0x4420fffd,
+ 0x78010002,
+ 0x38211ff0,
+ 0xb7211000,
+ 0x28410000,
+ 0x64210012,
+ 0x4420fffe,
+ 0x38a500ac,
+ 0x34010000,
+ 0x58a10000,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x3821029c,
+ 0x28210000,
+ 0x20214000,
+ 0x4420000a,
+ 0x3801d05c,
+ 0xb7211000,
+ 0x340106ff,
+ 0x58410000,
+ 0x3801d064,
+ 0xb7211000,
+ 0x28410000,
+ 0x64210010,
+ 0x4420fffe,
+ 0xc3a00000,
+ 0x7801c020,
+ 0x3821029c,
+ 0x28210000,
+ 0x20214000,
+ 0x5c20000a,
+ 0x3801d05c,
+ 0xb7211000,
+ 0x340105ff,
+ 0x58410000,
+ 0x3801d064,
+ 0xb7211000,
+ 0x28410000,
+ 0x64210012,
+ 0x4420fffe,
+ 0xc3a00000,
+ 0xc3a00000,
+ 0xc3a00000,
+ 0xc3a00000,
+ 0xc3a00000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b900004,
+ 0x204affff,
+ 0x2026ffff,
+ 0xb8606000,
+ 0xb8806800,
+ 0xb9400800,
+ 0x45400049,
+ 0x3545ffff,
+ 0xb4ca0800,
+ 0x3421ffff,
+ 0x14a3001f,
+ 0x00c80005,
+ 0x1422001f,
+ 0x0063001b,
+ 0x3d040002,
+ 0x0042001b,
+ 0xb48c2000,
+ 0xb4a32800,
+ 0x14a50005,
+ 0xb4220800,
+ 0x28870000,
+ 0x14210005,
+ 0x20abffff,
+ 0x202fffff,
+ 0x20c4001f,
+ 0x34050000,
+ 0x50ab0017,
+ 0x34010020,
+ 0xfc858000,
+ 0xc8247000,
+ 0x35010001,
+ 0x2028ffff,
+ 0x3d010002,
+ 0x3ca60002,
+ 0xb42c0800,
+ 0x28290000,
+ 0x80e41000,
+ 0x34a50001,
+ 0xbd2e0800,
+ 0xb4cd1800,
+ 0xb8221000,
+ 0x5e000003,
+ 0x58670000,
+ 0xe0000002,
+ 0x58620000,
+ 0xb9203800,
+ 0x20a5ffff,
+ 0x50ab0002,
+ 0xe3ffffee,
+ 0x7c810000,
+ 0x2149001f,
+ 0x450f000b,
+ 0xb8e01800,
+ 0x4420000c,
+ 0x3de10002,
+ 0xc8041800,
+ 0xb42c0800,
+ 0x28210000,
+ 0x80e41000,
+ 0xbc230800,
+ 0xb8221800,
+ 0xe0000004,
+ 0xb8e01800,
+ 0x44200002,
+ 0x80e41800,
+ 0x3ca60002,
+ 0x2122ffff,
+ 0x35650001,
+ 0x44400008,
+ 0x3401ffff,
+ 0xbc220800,
+ 0xa4200800,
+ 0xb4cd1000,
+ 0xa0610800,
+ 0x58410000,
+ 0xe0000003,
+ 0xb4cd0800,
+ 0x58230000,
+ 0x20a1ffff,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b900004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cffe4,
+ 0x5b8b001c,
+ 0x5b8c0018,
+ 0x5b8d0014,
+ 0x5b8e0010,
+ 0x5b8f000c,
+ 0x5b900008,
+ 0x5b910004,
+ 0x2048ffff,
+ 0x2026ffff,
+ 0xb8606000,
+ 0xb8805800,
+ 0xb9000800,
+ 0x45000072,
+ 0xb4c88800,
+ 0x3624ffff,
+ 0x3503ffff,
+ 0x1482001f,
+ 0x1461001f,
+ 0x0042001b,
+ 0x0021001b,
+ 0xb4822000,
+ 0x14840005,
+ 0xb4611800,
+ 0x20c7001f,
+ 0x14630005,
+ 0x2085ffff,
+ 0x00c60005,
+ 0x7cf00000,
+ 0x206dffff,
+ 0x2104001f,
+ 0x340a0000,
+ 0x5e0a0024,
+ 0xb8e05000,
+ 0x50ed000d,
+ 0x3d410002,
+ 0x3cc20002,
+ 0xb42b0800,
+ 0x28210000,
+ 0xb44c1000,
+ 0x58410000,
+ 0x35410001,
+ 0x34c20001,
+ 0x202affff,
+ 0x2046ffff,
+ 0x514d0002,
+ 0xe3fffff5,
+ 0x3d420002,
+ 0x4480000e,
+ 0x3403ffff,
+ 0xbc641800,
+ 0xb44b0800,
+ 0x28240000,
+ 0x3ca50002,
+ 0xa4601000,
+ 0xb4ac2800,
+ 0x28a10000,
+ 0xa0822000,
+ 0xa0230800,
+ 0xb8240800,
+ 0x58a10000,
+ 0xe0000040,
+ 0xb44b1000,
+ 0x3cc10002,
+ 0x28420000,
+ 0xb42c0800,
+ 0x58220000,
+ 0xe000003a,
+ 0x29630000,
+ 0xb9401000,
+ 0x50c5001e,
+ 0x3401ffff,
+ 0xbc270800,
+ 0xa4207800,
+ 0x34010020,
+ 0xc8277000,
+ 0x3cc10002,
+ 0x804e1000,
+ 0xbc674800,
+ 0xb42c4000,
+ 0xb9221000,
+ 0x34c60001,
+ 0x35440001,
+ 0x5d400006,
+ 0x29010000,
+ 0xa02f0800,
+ 0xb8290800,
+ 0x59010000,
+ 0xe0000002,
+ 0x59020000,
+ 0x208affff,
+ 0x3d410002,
+ 0xb8601000,
+ 0x20c6ffff,
+ 0x34030000,
+ 0xb42b0800,
+ 0x554d0002,
+ 0x28230000,
+ 0x50c50002,
+ 0xe3ffffe9,
+ 0xc8070800,
+ 0x80410800,
+ 0xbc671800,
+ 0x2224001f,
+ 0x3402ffff,
+ 0xbc443000,
+ 0xb8614000,
+ 0x5c800002,
+ 0xb8803000,
+ 0x65410000,
+ 0xa0300800,
+ 0x64210000,
+ 0x5c200005,
+ 0xc8071000,
+ 0x3401ffff,
+ 0x80220800,
+ 0xb8c13000,
+ 0x3ca30002,
+ 0xa4c01000,
+ 0xb46c1800,
+ 0x28610000,
+ 0xa1021000,
+ 0xa0260800,
+ 0xb8220800,
+ 0x58610000,
+ 0x35a10001,
+ 0x2021ffff,
+ 0x2b8b001c,
+ 0x2b8c0018,
+ 0x2b8d0014,
+ 0x2b8e0010,
+ 0x2b8f000c,
+ 0x2b900008,
+ 0x2b910004,
+ 0x379c001c,
+ 0xc3a00000,
+ 0x2b2301cc,
+ 0x202500ff,
+ 0x34040000,
+ 0x20610001,
+ 0x5c250007,
+ 0x2b2301cc,
+ 0x34840001,
+ 0x20610001,
+ 0x5044fffc,
+ 0x34010001,
+ 0xc3a00000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0xb8205800,
+ 0x340c0000,
+ 0xb9601000,
+ 0xb9800800,
+ 0xfbffffeb,
+ 0xb9601000,
+ 0xb9805800,
+ 0x442c0002,
+ 0x340c0001,
+ 0x7d830000,
+ 0x34010001,
+ 0x5c600003,
+ 0xfbffffe3,
+ 0x44200002,
+ 0x340b0001,
+ 0xb9600800,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x2b2301cc,
+ 0x202500ff,
+ 0x34040000,
+ 0x00610001,
+ 0x20210001,
+ 0x5c250007,
+ 0x2b2301cc,
+ 0x34840001,
+ 0x00610001,
+ 0x5044fffb,
+ 0x34010001,
+ 0xc3a00000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xb8201000,
+ 0x34010000,
+ 0xfbffffee,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xb8201000,
+ 0x34010001,
+ 0xfbffffe6,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x780200ff,
+ 0x3842ffff,
+ 0x78030100,
+ 0xa0220800,
+ 0x38630000,
+ 0xb8230800,
+ 0x5b2101c0,
+ 0x34010258,
+ 0xfbffffbf,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x7c2f0000,
+ 0x780400ff,
+ 0x34010003,
+ 0xc82f0800,
+ 0x3884ffff,
+ 0x3445ffff,
+ 0x3c210018,
+ 0xa0441000,
+ 0x00a50005,
+ 0xb8220800,
+ 0x34040000,
+ 0x5b2101c0,
+ 0xb8607000,
+ 0x34ab0001,
+ 0xb8806000,
+ 0x4c8b0029,
+ 0x3d810002,
+ 0x3563ffff,
+ 0x5de00005,
+ 0x2b2201c4,
+ 0xb42e0800,
+ 0x58220000,
+ 0xe0000004,
+ 0xb42e0800,
+ 0x28210000,
+ 0x5b2101c8,
+ 0x5d830009,
+ 0x340b0000,
+ 0x5c8b0004,
+ 0x34010258,
+ 0xfbffff96,
+ 0x442b0002,
+ 0x340b0001,
+ 0xb9602000,
+ 0xe0000016,
+ 0x34010000,
+ 0x4c2c0009,
+ 0xb8206800,
+ 0x5c810005,
+ 0x34010001,
+ 0x34020258,
+ 0xfbffffa4,
+ 0x442d0002,
+ 0x340d0001,
+ 0xb9a02000,
+ 0x340d0000,
+ 0x5c8d0005,
+ 0xb8800800,
+ 0x34020258,
+ 0xfbffff9c,
+ 0x442d0002,
+ 0x340d0001,
+ 0xb9a02000,
+ 0x358c0001,
+ 0x4d8b0002,
+ 0xe3ffffd9,
+ 0xb8800800,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xb8401800,
+ 0xb8201000,
+ 0x34010001,
+ 0xfbffffb3,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xb8401800,
+ 0xb8201000,
+ 0x34010000,
+ 0xfbffffaa,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b9d0004,
+ 0x5b820008,
+ 0xb8201000,
+ 0x37830008,
+ 0x34010001,
+ 0xfbffffa0,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x780bc030,
+ 0x396b0000,
+ 0x29610000,
+ 0x780c0003,
+ 0x398cf99c,
+ 0x29620004,
+ 0x202107ff,
+ 0x204207ff,
+ 0xfbffc84b,
+ 0x0f01080e,
+ 0x29610008,
+ 0x2f02080e,
+ 0x202107ff,
+ 0x2042ffff,
+ 0xfbffc845,
+ 0x0f01080e,
+ 0x2961000c,
+ 0x2f02080e,
+ 0x202107ff,
+ 0x2042ffff,
+ 0xfbffc83f,
+ 0x0f01080e,
+ 0x2f01080e,
+ 0x2021ffff,
+ 0x3421fe78,
+ 0x2b02081c,
+ 0x3c230005,
+ 0x4843000c,
+ 0x29810000,
+ 0x78020003,
+ 0x38428c00,
+ 0x20210001,
+ 0x5c20000f,
+ 0x4041002a,
+ 0x330102b9,
+ 0x29810000,
+ 0x38210001,
+ 0x59810000,
+ 0xe0000009,
+ 0x2b010820,
+ 0x34040000,
+ 0x4c610006,
+ 0x29810000,
+ 0x3402fffe,
+ 0xa0220800,
+ 0x59810000,
+ 0x330402b9,
+ 0x34010000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x78050003,
+ 0x38a58c00,
+ 0x40a1004b,
+ 0x78060003,
+ 0x78070003,
+ 0x78080003,
+ 0x78040003,
+ 0x78030003,
+ 0x38c6f82c,
+ 0x38e78ba8,
+ 0x3908f818,
+ 0x38848b24,
+ 0x3863056c,
+ 0x44200014,
+ 0x28c10000,
+ 0x40a2002b,
+ 0x58830050,
+ 0x00210008,
+ 0x34420068,
+ 0x30e10014,
+ 0x28c10000,
+ 0x3c420007,
+ 0x00210008,
+ 0x30e1002d,
+ 0x5b02081c,
+ 0x40a10029,
+ 0x2b02081c,
+ 0x3c210007,
+ 0xc8411000,
+ 0x5b020820,
+ 0x29010000,
+ 0x38210800,
+ 0x59010000,
+ 0xc3a00000,
+ 0x78040003,
+ 0x78030002,
+ 0x38634a68,
+ 0x78020003,
+ 0x38848b24,
+ 0x34010000,
+ 0x38428ba8,
+ 0x58830050,
+ 0x3041002d,
+ 0x30410014,
+ 0x78030003,
+ 0x330102b9,
+ 0x3863f818,
+ 0x28610000,
+ 0x3402f7ff,
+ 0xa0220800,
+ 0x58610000,
+ 0xc3a00000,
+ 0x379cffb0,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x780e0003,
+ 0x39cefa5c,
+ 0x29c10000,
+ 0x78030003,
+ 0x780c0003,
+ 0x00220001,
+ 0x780d0003,
+ 0x780b0003,
+ 0x396bfa58,
+ 0x3863fa4c,
+ 0x398cfa50,
+ 0x39adfa54,
+ 0x20420001,
+ 0x20210001,
+ 0x5c200002,
+ 0x44400032,
+ 0x28610000,
+ 0xf8001b4b,
+ 0x29c40000,
+ 0xb8207800,
+ 0x3781004c,
+ 0x20840001,
+ 0x7c840001,
+ 0x37820044,
+ 0x3783003c,
+ 0x5c80001e,
+ 0x29640000,
+ 0x34060000,
+ 0x00850010,
+ 0x2084ffff,
+ 0x48a40002,
+ 0x0d660002,
+ 0x298c0000,
+ 0x2d650002,
+ 0x34040000,
+ 0x5b8c004c,
+ 0x29ad0000,
+ 0x5b840044,
+ 0x5b850048,
+ 0x5b8d0050,
+ 0xf8000056,
+ 0x2d610002,
+ 0x3403000f,
+ 0x37870050,
+ 0x34210004,
+ 0x0d610002,
+ 0x2b820040,
+ 0x2b81003c,
+ 0x3784001c,
+ 0x2045001f,
+ 0xbc651800,
+ 0x20a6001c,
+ 0xb4e62800,
+ 0x58afffcc,
+ 0xf8000aac,
+ 0x29c50000,
+ 0xb9e02000,
+ 0x34010018,
+ 0x00a50001,
+ 0x34020003,
+ 0x20a50001,
+ 0x7ca50001,
+ 0x34030050,
+ 0x5ca00002,
+ 0xfbfff51b,
+ 0x34010000,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0050,
+ 0xc3a00000,
+ 0x78040003,
+ 0x3884fa5c,
+ 0x40810001,
+ 0x78020003,
+ 0x38428ba8,
+ 0x30410017,
+ 0x40840001,
+ 0x78030003,
+ 0x78010003,
+ 0x38638b24,
+ 0x38210720,
+ 0x30440030,
+ 0x5861005c,
+ 0xc3a00000,
+ 0x78030003,
+ 0x78020002,
+ 0x78010003,
+ 0x38218ba8,
+ 0x34040000,
+ 0x38638b24,
+ 0x38424a68,
+ 0x5862005c,
+ 0x30240030,
+ 0x30240017,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x00280010,
+ 0x2046ffff,
+ 0x2021ffff,
+ 0x88263800,
+ 0x00420010,
+ 0x89063000,
+ 0x88220800,
+ 0x00e40010,
+ 0x20c5ffff,
+ 0xb4852000,
+ 0x2025ffff,
+ 0xb4852000,
+ 0x3c850010,
+ 0x00c60010,
+ 0x00840010,
+ 0x89024000,
+ 0x00210010,
+ 0xb4862000,
+ 0xb4812000,
+ 0x20e7ffff,
+ 0xb4a72800,
+ 0xb4882000,
+ 0x58640000,
+ 0x58650004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x28240004,
+ 0x28450004,
+ 0x28280000,
+ 0x2084ffff,
+ 0x20a5ffff,
+ 0xb4852000,
+ 0x2087ffff,
+ 0x58670004,
+ 0x28250004,
+ 0x28460004,
+ 0x00840010,
+ 0x00a50010,
+ 0x00c60010,
+ 0x28420000,
+ 0xb4a62800,
+ 0xb4852000,
+ 0x3c810010,
+ 0x00840010,
+ 0xb8e13800,
+ 0xb4882000,
+ 0xb4822000,
+ 0x58640000,
+ 0x58670004,
+ 0xc3a00000,
+ 0x28240004,
+ 0x28230000,
+ 0x34050000,
+ 0x3406001f,
+ 0x6c810000,
+ 0x3c630001,
+ 0x64210000,
+ 0x3ca50001,
+ 0x34c6ffff,
+ 0xb4611800,
+ 0xb4842000,
+ 0x54430003,
+ 0x34a50001,
+ 0xc8621800,
+ 0x4cc0fff6,
+ 0xb8a00800,
+ 0xc3a00000,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0xb8206000,
+ 0x34210001,
+ 0xf8001ad2,
+ 0x3c2b0008,
+ 0xb9800800,
+ 0xf8001acf,
+ 0xb9615800,
+ 0x2161ffff,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xf8001aa1,
+ 0xb8202000,
+ 0x7801ff00,
+ 0x780200ff,
+ 0x38210000,
+ 0x38420000,
+ 0xa0810800,
+ 0xa0821000,
+ 0x00420008,
+ 0x2083ff00,
+ 0x00210018,
+ 0x3c630008,
+ 0xb8220800,
+ 0x3c840018,
+ 0xb8230800,
+ 0xb8240800,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b0014,
+ 0x5b8c0010,
+ 0x5b8d000c,
+ 0x5b8e0008,
+ 0x5b9d0004,
+ 0xb8205800,
+ 0x34210004,
+ 0x780dff00,
+ 0x780e00ff,
+ 0xf8001a84,
+ 0x39ad0000,
+ 0x39ce0000,
+ 0xa02d2000,
+ 0xa02e1800,
+ 0x00630008,
+ 0x2022ff00,
+ 0x00840018,
+ 0x3c420008,
+ 0xb8832000,
+ 0x3c210018,
+ 0xb8822000,
+ 0xb8812000,
+ 0xb9600800,
+ 0xb8805800,
+ 0xf8001a75,
+ 0xa02d6800,
+ 0xa02e7000,
+ 0x01ce0008,
+ 0x2022ff00,
+ 0x01ad0018,
+ 0x3c420008,
+ 0xb9ae6800,
+ 0x3c210018,
+ 0xb9a26800,
+ 0xb9a16800,
+ 0x340c0000,
+ 0xb96c1800,
+ 0xb98d2000,
+ 0xb8600800,
+ 0xb8801000,
+ 0x2b8b0014,
+ 0x2b8c0010,
+ 0x2b8d000c,
+ 0x2b8e0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b0014,
+ 0x5b8c0010,
+ 0x5b8d000c,
+ 0x5b8e0008,
+ 0x5b9d0004,
+ 0x780e0003,
+ 0xb9c06800,
+ 0xb8205800,
+ 0x39ad8e38,
+ 0x340c0007,
+ 0xb9600800,
+ 0xf8001a52,
+ 0x7802ff00,
+ 0x780300ff,
+ 0x38420000,
+ 0x38630000,
+ 0xa0221000,
+ 0xa0231800,
+ 0x2024ff00,
+ 0x00420018,
+ 0x00630008,
+ 0x3c840008,
+ 0xb8431000,
+ 0x3c210018,
+ 0xb8441000,
+ 0xb8411000,
+ 0x59a20000,
+ 0x356b0004,
+ 0x358cffff,
+ 0x35ad0004,
+ 0x4d80ffec,
+ 0xb9c03000,
+ 0x38c68e38,
+ 0x2cc50014,
+ 0x2cc20016,
+ 0x34010000,
+ 0x20a300ff,
+ 0x204400ff,
+ 0x3c630008,
+ 0x3c840008,
+ 0x00a50008,
+ 0x00420008,
+ 0xb8a32800,
+ 0xb8441000,
+ 0x0cc20016,
+ 0x0cc50014,
+ 0x2b8b0014,
+ 0x2b8c0010,
+ 0x2b8d000c,
+ 0x2b8e0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0xb8405800,
+ 0xf8001a24,
+ 0x7802ff00,
+ 0x780300ff,
+ 0x38420000,
+ 0x38630000,
+ 0xa0221000,
+ 0xa0231800,
+ 0x00630008,
+ 0x2024ff00,
+ 0x00420018,
+ 0x3c840008,
+ 0xb8431000,
+ 0x3c210018,
+ 0xb8441000,
+ 0xb8411000,
+ 0x59620000,
+ 0x2d610000,
+ 0x78040003,
+ 0x38848c00,
+ 0x2021ffff,
+ 0x202200ff,
+ 0x3c420008,
+ 0x00210008,
+ 0x3403ffff,
+ 0xb8220800,
+ 0x0d610000,
+ 0x2d610000,
+ 0x2021ff00,
+ 0x64211600,
+ 0x4420000d,
+ 0x2d610000,
+ 0x40820013,
+ 0x3403fffe,
+ 0x2021000f,
+ 0x5c220008,
+ 0x41610002,
+ 0x40820048,
+ 0x202100ff,
+ 0xe4220800,
+ 0xc8010800,
+ 0x20230003,
+ 0x3463fffd,
+ 0xb8600800,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0xb8406800,
+ 0xb8607800,
+ 0xb8807000,
+ 0xb8205800,
+ 0x340c0000,
+ 0x518d0008,
+ 0xb9600800,
+ 0xb9c01000,
+ 0xfbffffbe,
+ 0xb56f5800,
+ 0x44200003,
+ 0x358c0001,
+ 0xe3fffff9,
+ 0xb9800800,
+ 0x55ac0002,
+ 0x3401ffff,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cffe4,
+ 0x5b8b0014,
+ 0x5b8c0010,
+ 0x5b8d000c,
+ 0x5b8e0008,
+ 0x5b9d0004,
+ 0x78020003,
+ 0x38428e38,
+ 0x40420019,
+ 0xb8206000,
+ 0x370e01c4,
+ 0x34030068,
+ 0x37840018,
+ 0xfbffffd4,
+ 0x4c200003,
+ 0x3401ffff,
+ 0xe0000016,
+ 0x2f820018,
+ 0x08210068,
+ 0xb9c05800,
+ 0x0f0201c0,
+ 0x4382001a,
+ 0xb5810800,
+ 0x342c0004,
+ 0x330201c2,
+ 0x4382001b,
+ 0x340d0018,
+ 0x330201c3,
+ 0xb9800800,
+ 0xf80019b9,
+ 0x59610000,
+ 0x358c0004,
+ 0x35adffff,
+ 0x356b0004,
+ 0x4da0fffa,
+ 0x34010014,
+ 0x59c10010,
+ 0x34010000,
+ 0x2b8b0014,
+ 0x2b8c0010,
+ 0x2b8d000c,
+ 0x2b8e0008,
+ 0x2b9d0004,
+ 0x379c001c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0xb8205800,
+ 0xfbffff47,
+ 0x3402ffff,
+ 0x4c200002,
+ 0xe0000008,
+ 0x5b0b01bc,
+ 0x2b0101bc,
+ 0x34210020,
+ 0xfbffffc8,
+ 0x6c210000,
+ 0x3c220001,
+ 0x3442fffe,
+ 0xb8400800,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x2b2201d0,
+ 0x3403ff80,
+ 0x340100d2,
+ 0xa0431000,
+ 0x3842040a,
+ 0x5b2201d0,
+ 0xfbfffd49,
+ 0x34020001,
+ 0x34010009,
+ 0xfbfffdae,
+ 0x34010002,
+ 0xb8201000,
+ 0xfbfffdab,
+ 0x34020000,
+ 0x34010009,
+ 0xfbfffda8,
+ 0x78020003,
+ 0x38428e58,
+ 0x34019f9f,
+ 0x7803000f,
+ 0x3863ffff,
+ 0x58410000,
+ 0x58430004,
+ 0x34010034,
+ 0xfbfffd8d,
+ 0x34020001,
+ 0x34010009,
+ 0xfbfffd9c,
+ 0x34020003,
+ 0x34010002,
+ 0xfbfffd99,
+ 0x34020050,
+ 0x34010009,
+ 0xfbfffd96,
+ 0x780b0003,
+ 0x396b8e60,
+ 0x34011000,
+ 0x340c0008,
+ 0x59610000,
+ 0xb9601000,
+ 0x596c0004,
+ 0x34010024,
+ 0xfbfffd7b,
+ 0x34020050,
+ 0x34010009,
+ 0xfbfffd8a,
+ 0x34011020,
+ 0x59610000,
+ 0x596c0004,
+ 0xb9601000,
+ 0x34010024,
+ 0xfbfffd72,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x2b2201d0,
+ 0x3403ff80,
+ 0x340100d2,
+ 0xa0431000,
+ 0x3842040a,
+ 0x5b2201d0,
+ 0xfbfffd0c,
+ 0x34020001,
+ 0x34010009,
+ 0xfbfffd71,
+ 0x34010002,
+ 0xb8201000,
+ 0xfbfffd6e,
+ 0x34020000,
+ 0x34010009,
+ 0xfbfffd6b,
+ 0x78020003,
+ 0x38428e58,
+ 0x34019f9f,
+ 0x7803000f,
+ 0x3863ffff,
+ 0x58410000,
+ 0x58430004,
+ 0x34010034,
+ 0xfbfffd50,
+ 0x34020001,
+ 0x34010009,
+ 0xfbfffd5f,
+ 0x34020003,
+ 0x34010002,
+ 0xfbfffd5c,
+ 0x34020050,
+ 0x34010009,
+ 0xfbfffd59,
+ 0x780b0003,
+ 0x396b8e60,
+ 0x34011000,
+ 0x340c0008,
+ 0x59610000,
+ 0xb9601000,
+ 0x596c0004,
+ 0x34010024,
+ 0xfbfffd3e,
+ 0x34020050,
+ 0x34010009,
+ 0xfbfffd4d,
+ 0x34010000,
+ 0x59610000,
+ 0x596c0004,
+ 0xb9601000,
+ 0x34010024,
+ 0xfbfffd35,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x2b2201d0,
+ 0x3403ff80,
+ 0x340100d2,
+ 0xa0431000,
+ 0x3842040a,
+ 0x5b2201d0,
+ 0xfbfffcd1,
+ 0x34020001,
+ 0x34010009,
+ 0xfbfffd36,
+ 0x34010002,
+ 0xb8201000,
+ 0xfbfffd33,
+ 0x34020000,
+ 0x34010009,
+ 0xfbfffd30,
+ 0x78020003,
+ 0x38428e58,
+ 0x3401ffff,
+ 0x7803000c,
+ 0x3863020f,
+ 0x58410000,
+ 0x58430004,
+ 0x34010034,
+ 0xfbfffd15,
+ 0x34020001,
+ 0x34010009,
+ 0xfbfffd24,
+ 0x34020003,
+ 0x34010002,
+ 0xfbfffd21,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x2b2101d0,
+ 0x3402ff80,
+ 0xa0220800,
+ 0x3402fbff,
+ 0xa0220800,
+ 0x5b2101d0,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b0014,
+ 0x5b8c0010,
+ 0x5b8d000c,
+ 0x5b8e0008,
+ 0x5b9d0004,
+ 0x78010002,
+ 0x38210000,
+ 0x3884dfe0,
+ 0x78020004,
+ 0xb8812000,
+ 0x38420000,
+ 0xb8822000,
+ 0x78010008,
+ 0x38210000,
+ 0x78020010,
+ 0xb8812000,
+ 0x38420000,
+ 0xb8822000,
+ 0x78010100,
+ 0x38210000,
+ 0x78020200,
+ 0x38420000,
+ 0xb8812000,
+ 0x78030400,
+ 0x38630000,
+ 0xb8822000,
+ 0x78010800,
+ 0xb8832000,
+ 0x38210000,
+ 0xb8812000,
+ 0x5b240e60,
+ 0xfbffffb5,
+ 0x34020051,
+ 0x34010009,
+ 0x780e0003,
+ 0xfbfffcf2,
+ 0xb9c05800,
+ 0x396b8e60,
+ 0x3401008e,
+ 0x340c0008,
+ 0x59610000,
+ 0xb9601000,
+ 0x596c0004,
+ 0x34010024,
+ 0xfbfffcd7,
+ 0x34020051,
+ 0x34010009,
+ 0xfbfffce6,
+ 0x780d0100,
+ 0xb9a00800,
+ 0x382103ae,
+ 0x59610000,
+ 0xb9601000,
+ 0x596c0004,
+ 0x34010024,
+ 0xfbfffccc,
+ 0x34020001,
+ 0x34010009,
+ 0xfbfffcdb,
+ 0x34010002,
+ 0xb8201000,
+ 0xfbfffcd8,
+ 0x34020000,
+ 0x34010009,
+ 0xfbfffcd5,
+ 0x7801c00c,
+ 0x38210000,
+ 0x28210000,
+ 0x78020003,
+ 0x78030008,
+ 0x20210002,
+ 0x44200005,
+ 0x7801a0f8,
+ 0x38428e58,
+ 0x38211405,
+ 0xe0000004,
+ 0x7801a0f8,
+ 0x38428e58,
+ 0x38217465,
+ 0x58410000,
+ 0x78020003,
+ 0x38630001,
+ 0x38428e58,
+ 0x58430004,
+ 0x34010034,
+ 0xfbfffcae,
+ 0x34020001,
+ 0x34010009,
+ 0xfbfffcbd,
+ 0x34020003,
+ 0x34010002,
+ 0xfbfffcba,
+ 0x34020050,
+ 0x34010009,
+ 0xfbfffcb7,
+ 0xb9c05800,
+ 0x396b8e60,
+ 0x3401008e,
+ 0x340c0008,
+ 0x59610000,
+ 0xb9601000,
+ 0x596c0004,
+ 0x34010024,
+ 0xfbfffc9c,
+ 0x34020050,
+ 0x34010009,
+ 0xfbfffcab,
+ 0x39ad03ae,
+ 0x596d0000,
+ 0x596c0004,
+ 0xb9601000,
+ 0x34010024,
+ 0xfbfffc93,
+ 0x2b8b0014,
+ 0x2b8c0010,
+ 0x2b8d000c,
+ 0x2b8e0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x379cffe4,
+ 0x5b8b001c,
+ 0x5b8c0018,
+ 0x5b8d0014,
+ 0x5b8e0010,
+ 0x5b8f000c,
+ 0x5b900008,
+ 0x5b9d0004,
+ 0xfbffff54,
+ 0x34020001,
+ 0x34010009,
+ 0xfbfffc92,
+ 0x34010002,
+ 0xb8201000,
+ 0xfbfffc8f,
+ 0x34020000,
+ 0x34010009,
+ 0xfbfffc8c,
+ 0x78020003,
+ 0x7801a0f8,
+ 0x38428e58,
+ 0x38217465,
+ 0x78030008,
+ 0x38630001,
+ 0x58410000,
+ 0x58430004,
+ 0x34010034,
+ 0xfbfffc70,
+ 0x34020001,
+ 0x34010009,
+ 0xfbfffc7f,
+ 0x34020003,
+ 0x34010002,
+ 0xfbfffc7c,
+ 0x34020050,
+ 0x34010009,
+ 0x780b0003,
+ 0x780e0100,
+ 0x396b8e60,
+ 0x340c0008,
+ 0xfbfffc75,
+ 0x39ce02ae,
+ 0xb9601000,
+ 0x596e0000,
+ 0x596c0004,
+ 0x34010024,
+ 0xfbfffc5d,
+ 0x34020050,
+ 0x34010009,
+ 0x780d0100,
+ 0xfbfffc6b,
+ 0x39ad00ae,
+ 0xb9601000,
+ 0x596d0000,
+ 0x596c0004,
+ 0x34010024,
+ 0xfbfffc53,
+ 0x34020050,
+ 0x34010009,
+ 0xfbfffc62,
+ 0x341000ae,
+ 0xb9601000,
+ 0x59700000,
+ 0x596c0004,
+ 0x34010024,
+ 0xfbfffc4a,
+ 0x34020050,
+ 0x34010009,
+ 0xfbfffc59,
+ 0x340f0000,
+ 0xb9601000,
+ 0x596f0000,
+ 0x596c0004,
+ 0x34010024,
+ 0xfbfffc41,
+ 0x34020051,
+ 0x34010009,
+ 0xfbfffc50,
+ 0xb9601000,
+ 0x596e0000,
+ 0x596c0004,
+ 0x34010024,
+ 0xfbfffc39,
+ 0x34020051,
+ 0x34010009,
+ 0xfbfffc48,
+ 0xb9601000,
+ 0x596d0000,
+ 0x596c0004,
+ 0x34010024,
+ 0xfbfffc31,
+ 0x34020051,
+ 0x34010009,
+ 0xfbfffc40,
+ 0xb9601000,
+ 0x59700000,
+ 0x596c0004,
+ 0x34010024,
+ 0xfbfffc29,
+ 0x34020051,
+ 0x34010009,
+ 0xfbfffc38,
+ 0x596c0004,
+ 0x596f0000,
+ 0xb9601000,
+ 0x34010024,
+ 0xfbfffc21,
+ 0x5b2f0e60,
+ 0x2b8b001c,
+ 0x2b8c0018,
+ 0x2b8d0014,
+ 0x2b8e0010,
+ 0x2b8f000c,
+ 0x2b900008,
+ 0x2b9d0004,
+ 0x379c001c,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x78020003,
+ 0x3842f81c,
+ 0x28420000,
+ 0x780bc050,
+ 0x780c0130,
+ 0x2042ff00,
+ 0x00420008,
+ 0x396b00b4,
+ 0x34010064,
+ 0x398c8060,
+ 0x34030003,
+ 0x50620002,
+ 0xe0000012,
+ 0x296b0000,
+ 0xfbffd2d5,
+ 0xfbffd2c0,
+ 0xb9800800,
+ 0x34020001,
+ 0xf8000628,
+ 0xb9800800,
+ 0x34020001,
+ 0xf8000643,
+ 0xb9800800,
+ 0x34020004,
+ 0xf8000639,
+ 0x216b007f,
+ 0xb9600800,
+ 0x34020007,
+ 0x504b0002,
+ 0xfbffd2b2,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x3821f81c,
+ 0x28210000,
+ 0x780bc210,
+ 0x396b0008,
+ 0x29620000,
+ 0x202100ff,
+ 0x08210064,
+ 0x38420002,
+ 0x59620000,
+ 0xf80006bf,
+ 0x29610000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0x59610000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b0014,
+ 0x5b8c0010,
+ 0x5b8d000c,
+ 0x5b8e0008,
+ 0x5b9d0004,
+ 0x78010140,
+ 0x38210011,
+ 0xf80005f4,
+ 0x3824000f,
+ 0x78010140,
+ 0xb8801000,
+ 0x38210011,
+ 0xf80005ea,
+ 0x78010130,
+ 0x38218062,
+ 0xf80005ec,
+ 0x3402f7ff,
+ 0xa0222000,
+ 0x78010130,
+ 0xb8801000,
+ 0x38218062,
+ 0xf80005e1,
+ 0x78010130,
+ 0x38210002,
+ 0xf80005e3,
+ 0x3402fff3,
+ 0xa0222000,
+ 0x78010130,
+ 0xb8801000,
+ 0x38210002,
+ 0xf80005d8,
+ 0x78010130,
+ 0x38218063,
+ 0xf80005da,
+ 0x780effff,
+ 0xb9c01000,
+ 0x38427fff,
+ 0xa0220800,
+ 0x780dfffe,
+ 0x38248000,
+ 0xb9a01000,
+ 0x3842ffff,
+ 0x78010001,
+ 0xa0821000,
+ 0x38210000,
+ 0xb8412000,
+ 0x780cffef,
+ 0xb9801000,
+ 0x3842ffff,
+ 0x78010010,
+ 0xa0821000,
+ 0x38210000,
+ 0x780bfeff,
+ 0xb8412000,
+ 0xb9601800,
+ 0x3863ffff,
+ 0x78020100,
+ 0xa0831800,
+ 0x38420000,
+ 0x78010130,
+ 0xb8621000,
+ 0x38218063,
+ 0xf80005b8,
+ 0x78010130,
+ 0x38218062,
+ 0xf80005ba,
+ 0x38240001,
+ 0x78010130,
+ 0xb8801000,
+ 0x38218062,
+ 0xf80005b0,
+ 0x78010130,
+ 0x38218060,
+ 0xf80005b2,
+ 0x38240001,
+ 0x78010130,
+ 0xb8801000,
+ 0x38218060,
+ 0xf80005a8,
+ 0x78010003,
+ 0x3821f900,
+ 0x28210000,
+ 0x34020064,
+ 0x0821000b,
+ 0x34210032,
+ 0x8c220800,
+ 0xf800065f,
+ 0x78010110,
+ 0x38210010,
+ 0xf80005a2,
+ 0x38240001,
+ 0x78010110,
+ 0x38210010,
+ 0xb8801000,
+ 0xf8000598,
+ 0x78010110,
+ 0x38210010,
+ 0xf800059a,
+ 0x20210001,
+ 0x4420fffc,
+ 0x78010130,
+ 0x38218060,
+ 0xf8000595,
+ 0x20240001,
+ 0x64810000,
+ 0x4420fffb,
+ 0x78010130,
+ 0x38218062,
+ 0xf800058f,
+ 0x3402fffe,
+ 0xa0222000,
+ 0x78010130,
+ 0x38820800,
+ 0x38218062,
+ 0xf8000584,
+ 0x78010130,
+ 0x38218063,
+ 0xf8000586,
+ 0x39ce7fff,
+ 0xa02e2000,
+ 0x39adffff,
+ 0xa08d2000,
+ 0x398cffff,
+ 0xa08c2000,
+ 0x396bffff,
+ 0x78010130,
+ 0xa08b1000,
+ 0x38218063,
+ 0xf8000576,
+ 0x78010120,
+ 0x38214460,
+ 0xf8000578,
+ 0x20210300,
+ 0x5c20fffc,
+ 0x2b8b0014,
+ 0x2b8c0010,
+ 0x2b8d000c,
+ 0x2b8e0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0xb8202800,
+ 0x34010000,
+ 0xb8405800,
+ 0xb8201000,
+ 0xb8201800,
+ 0x340400b0,
+ 0x3406000f,
+ 0xf80017e5,
+ 0x34010000,
+ 0xb9602800,
+ 0xb8201000,
+ 0xb8201800,
+ 0x340400b4,
+ 0x3406000f,
+ 0xf80017de,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x340b0001,
+ 0x3d620011,
+ 0x34010000,
+ 0x3842e807,
+ 0xfbffffe3,
+ 0x34010003,
+ 0x34020010,
+ 0xfbffffe0,
+ 0x34010007,
+ 0x340200ff,
+ 0xfbffffdd,
+ 0xb9601000,
+ 0x34010008,
+ 0xfbffffda,
+ 0x7801c201,
+ 0x7802003c,
+ 0x3821c51c,
+ 0x38420000,
+ 0xfbfff101,
+ 0x34020058,
+ 0x5b02083c,
+ 0x34010ace,
+ 0x5b01084c,
+ 0x0f020852,
+ 0x34040000,
+ 0x3304085c,
+ 0x7803c020,
+ 0x3304085d,
+ 0x38630130,
+ 0x28620000,
+ 0x7801fffe,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x58620000,
+ 0x330b0830,
+ 0x78030003,
+ 0x33040831,
+ 0x3863f900,
+ 0x2861003c,
+ 0x78048000,
+ 0x38848000,
+ 0x3c21000a,
+ 0x5b010834,
+ 0x34010000,
+ 0x5b010838,
+ 0x2862002c,
+ 0x34010008,
+ 0x5b020844,
+ 0x28620030,
+ 0x5b020840,
+ 0x34020100,
+ 0x58820050,
+ 0xfbffbf77,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x34010008,
+ 0xfbffbf9c,
+ 0x34010000,
+ 0x33010830,
+ 0x2b010838,
+ 0x3403ffff,
+ 0x37040848,
+ 0x5b010858,
+ 0x2b010844,
+ 0x2b020840,
+ 0xf800065f,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x340b0001,
+ 0x3d620011,
+ 0x34010000,
+ 0x3842e807,
+ 0xfbffff97,
+ 0x34010003,
+ 0x34020010,
+ 0xfbffff94,
+ 0x34010007,
+ 0x340200ff,
+ 0xfbffff91,
+ 0xb9601000,
+ 0x34010008,
+ 0xfbffff8e,
+ 0x7801c201,
+ 0x7802003c,
+ 0x3821c51c,
+ 0x38420000,
+ 0xfbfff0b5,
+ 0x34020018,
+ 0x5b02083c,
+ 0x34010ace,
+ 0x5b01084c,
+ 0x0f020852,
+ 0x330b085c,
+ 0x7803c020,
+ 0x330b085d,
+ 0x38630130,
+ 0x28620000,
+ 0x7801fffe,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x58620000,
+ 0x330b0830,
+ 0x78020003,
+ 0x330b0831,
+ 0x3842f900,
+ 0x2841003c,
+ 0x3c21000a,
+ 0x5b010834,
+ 0x34010000,
+ 0x5b010838,
+ 0x2841002c,
+ 0x5b010844,
+ 0x28410030,
+ 0x5b010840,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x34010000,
+ 0x33010830,
+ 0x2b010838,
+ 0x3403ffff,
+ 0x37040848,
+ 0x5b010858,
+ 0x2b010844,
+ 0x2b020840,
+ 0xf800061c,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x2b03083c,
+ 0xb8207800,
+ 0xb8407000,
+ 0x2b010838,
+ 0x340b0000,
+ 0x88611800,
+ 0x2b010834,
+ 0x54230002,
+ 0xe0000026,
+ 0x2b01083c,
+ 0x2b030838,
+ 0x2b020840,
+ 0x88230800,
+ 0x2b0d0844,
+ 0x3c210002,
+ 0x2b030840,
+ 0xb4411000,
+ 0x344c0020,
+ 0x51830003,
+ 0x2b010844,
+ 0x342d0001,
+ 0x516e000a,
+ 0x3d620005,
+ 0xb9a00800,
+ 0xb5e22000,
+ 0xb5821000,
+ 0x3403ffff,
+ 0xf80005f6,
+ 0x35610001,
+ 0x202b00ff,
+ 0xe3fffff7,
+ 0x2b010838,
+ 0x34210001,
+ 0x5b010838,
+ 0x2b020838,
+ 0x2b010834,
+ 0x5422000a,
+ 0x34010000,
+ 0x5b010854,
+ 0x2b010838,
+ 0x3403ffff,
+ 0x37040848,
+ 0x5b010858,
+ 0x2b010844,
+ 0x2b020840,
+ 0xf80005e4,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x90002000,
+ 0x34010000,
+ 0xd0010000,
+ 0x7803c020,
+ 0x38630130,
+ 0x28620000,
+ 0x78010001,
+ 0x38210000,
+ 0x98411000,
+ 0x58620000,
+ 0xd0040000,
+ 0xc3a00000,
+ 0x2f020240,
+ 0x7808c030,
+ 0x34070000,
+ 0x2f050230,
+ 0x2042ffff,
+ 0x58220000,
+ 0x2f060234,
+ 0x39080000,
+ 0x20a5ffff,
+ 0x2f040238,
+ 0x20c6ffff,
+ 0x58250004,
+ 0x2f030244,
+ 0x2084ffff,
+ 0x58260008,
+ 0x2f020248,
+ 0x2063ffff,
+ 0x5824000c,
+ 0x2042ffff,
+ 0x58220028,
+ 0x58270020,
+ 0x58230024,
+ 0x58270010,
+ 0x58270014,
+ 0x58270018,
+ 0x5827001c,
+ 0x35020010,
+ 0x28420000,
+ 0x35080014,
+ 0x29020000,
+ 0x204207ff,
+ 0x3442fe28,
+ 0x3c42000d,
+ 0x5822005c,
+ 0xc3a00000,
+ 0x379cff98,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x378b000c,
+ 0xb9600800,
+ 0xfbffffd8,
+ 0x2b02083c,
+ 0xb9600800,
+ 0x00420003,
+ 0xfbffff8b,
+ 0xfbffffc7,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0068,
+ 0xc3a00000,
+ 0xc3a00000,
+ 0x379cff4c,
+ 0x5b9d0004,
+ 0x2b02083c,
+ 0x37810008,
+ 0x00420003,
+ 0xfbffff7f,
+ 0xfbffffbb,
+ 0x2b9d0004,
+ 0x379c00b4,
+ 0xc3a00000,
+ 0xb8203000,
+ 0x34050000,
+ 0x50a3000c,
+ 0x3c810002,
+ 0xb4260800,
+ 0x34210004,
+ 0x28460000,
+ 0x34840001,
+ 0x34a50001,
+ 0x58260000,
+ 0x34210004,
+ 0x34420004,
+ 0x50a30002,
+ 0xe3fffff9,
+ 0xb8800800,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x7802c040,
+ 0xb8205800,
+ 0x38420e10,
+ 0x34030024,
+ 0x34040000,
+ 0xfbffffe8,
+ 0xb8202000,
+ 0x7802c040,
+ 0xb9600800,
+ 0x38420ed0,
+ 0x34030002,
+ 0xfbffffe2,
+ 0xb8202000,
+ 0x7802c040,
+ 0xb9600800,
+ 0x38420eec,
+ 0x34030004,
+ 0xfbffffdc,
+ 0xb8202000,
+ 0x7802c040,
+ 0xb9600800,
+ 0x38421760,
+ 0x34030006,
+ 0xfbffffd6,
+ 0xb8202000,
+ 0x7802c040,
+ 0xb9600800,
+ 0x38421e34,
+ 0x34030002,
+ 0xfbffffd0,
+ 0xb8202000,
+ 0x7802c040,
+ 0xb9600800,
+ 0x38421e50,
+ 0x34030002,
+ 0xfbffffca,
+ 0xb8202000,
+ 0x7802c040,
+ 0xb9600800,
+ 0x38421e80,
+ 0x34030002,
+ 0xfbffffc4,
+ 0xb8202000,
+ 0x7802c040,
+ 0xb9600800,
+ 0x38421ef0,
+ 0x34030003,
+ 0xfbffffbe,
+ 0xb8202000,
+ 0x7802c040,
+ 0xb9600800,
+ 0x38422ef0,
+ 0x34030003,
+ 0xfbffffb8,
+ 0xb8202000,
+ 0x7802c040,
+ 0xb9600800,
+ 0x38423400,
+ 0x34030008,
+ 0xfbffffb2,
+ 0xb8202000,
+ 0x7802c040,
+ 0xb9600800,
+ 0x3842381c,
+ 0x34030002,
+ 0xfbffffac,
+ 0xb8202000,
+ 0x7802c040,
+ 0xb9600800,
+ 0x38423a3c,
+ 0x3403000c,
+ 0xfbffffa6,
+ 0x7801c030,
+ 0x38210000,
+ 0x34220010,
+ 0x28420000,
+ 0x34210014,
+ 0x28210000,
+ 0x202107ff,
+ 0x3421fe28,
+ 0x3c21000d,
+ 0x59610000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfe98,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x378b000c,
+ 0xb9600800,
+ 0xfbffffa2,
+ 0x2b02083c,
+ 0xb9600800,
+ 0x00420003,
+ 0xfbffff08,
+ 0xfbffff44,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0168,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x2f01080c,
+ 0x2b020868,
+ 0x2021ffff,
+ 0xfbffc211,
+ 0x5b010868,
+ 0x2f01080c,
+ 0x2b02086c,
+ 0x2021ffff,
+ 0xb4411000,
+ 0x5b02086c,
+ 0x2f01080e,
+ 0x2b020870,
+ 0x2021ffff,
+ 0xfbffc207,
+ 0x5b010870,
+ 0x2f01080e,
+ 0x2b020874,
+ 0x2021ffff,
+ 0xb4411000,
+ 0x5b020874,
+ 0x2f0102ee,
+ 0x2b020884,
+ 0x2021ffff,
+ 0xb4411000,
+ 0x5b020884,
+ 0x2b010888,
+ 0x2f0202b2,
+ 0x2042ffff,
+ 0xfbffc1f8,
+ 0x5b010888,
+ 0x2f0102b2,
+ 0x2b02088c,
+ 0x2021ffff,
+ 0xb4411000,
+ 0x5b02088c,
+ 0x2b010890,
+ 0x2b020198,
+ 0xb4220800,
+ 0x5b010890,
+ 0x2b010894,
+ 0x2f0206a0,
+ 0x2042ffff,
+ 0xfbffc1ea,
+ 0x5b010894,
+ 0x2f0102c4,
+ 0x2b020898,
+ 0x2021ffff,
+ 0xb4411000,
+ 0x5b020898,
+ 0x2b01089c,
+ 0x2f02015e,
+ 0x2042ffff,
+ 0xfbffc1e0,
+ 0x5b01089c,
+ 0x2f01015e,
+ 0x2b0208a0,
+ 0x2021ffff,
+ 0xb4411000,
+ 0x5b0208a0,
+ 0x2b0108a4,
+ 0x2f02015a,
+ 0x2042ffff,
+ 0xfbffc1d6,
+ 0x5b0108a4,
+ 0x2f02015a,
+ 0x78040003,
+ 0x3884fa64,
+ 0x2b0108a8,
+ 0x2042ffff,
+ 0x7803001e,
+ 0xb4220800,
+ 0x5b0108a8,
+ 0x2f02024c,
+ 0x38630000,
+ 0x2b0108ac,
+ 0x2042ffff,
+ 0xb4220800,
+ 0x5b0108ac,
+ 0x2f010248,
+ 0x2b0208b0,
+ 0x2021ffff,
+ 0xb4411000,
+ 0x5b0208b0,
+ 0x2b0108bc,
+ 0x5b0108bc,
+ 0x2b0108c0,
+ 0x5b0108c0,
+ 0x2b0108c4,
+ 0x5b0108c4,
+ 0x2b0108c8,
+ 0x5b0108c8,
+ 0x430106e8,
+ 0xb0200800,
+ 0xb4210800,
+ 0xb4380800,
+ 0x342108c8,
+ 0x2c220004,
+ 0x34420001,
+ 0x0c220004,
+ 0x4301008a,
+ 0x202100ff,
+ 0xb4210800,
+ 0xb4380800,
+ 0x342108d8,
+ 0x2c220004,
+ 0x34420001,
+ 0x0c220004,
+ 0x43010779,
+ 0x2b0208ec,
+ 0x18210001,
+ 0x202100ff,
+ 0xb4411000,
+ 0x5b0208ec,
+ 0x2b0108f0,
+ 0x5b0108f0,
+ 0x2b0108f4,
+ 0x5b0108f4,
+ 0x2b0108f8,
+ 0x5b0108f8,
+ 0x430102bf,
+ 0x2b0208fc,
+ 0x202100ff,
+ 0x3c210008,
+ 0xb4411000,
+ 0x5b0208fc,
+ 0x2b010900,
+ 0x2b02018c,
+ 0xb4220800,
+ 0x5b010900,
+ 0x28810000,
+ 0x2b020904,
+ 0xa0230800,
+ 0x00210011,
+ 0xb4411000,
+ 0x5b020904,
+ 0x2f01016e,
+ 0x2b020908,
+ 0x2021ffff,
+ 0xfbffc18a,
+ 0x5b010908,
+ 0x2f01016e,
+ 0x2b02090c,
+ 0x2021ffff,
+ 0xb4411000,
+ 0x5b02090c,
+ 0x2b010910,
+ 0x34210001,
+ 0x5b010910,
+ 0x2b020910,
+ 0x3801ffff,
+ 0x5c410003,
+ 0x34010001,
+ 0x33010832,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x34030000,
+ 0x37010868,
+ 0x3402002b,
+ 0x58230000,
+ 0x3442ffff,
+ 0x34210004,
+ 0x4c40fffd,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0xfbfffff6,
+ 0x34010010,
+ 0x33010831,
+ 0x34010001,
+ 0x33010830,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x2b010910,
+ 0x442000c1,
+ 0x2f010804,
+ 0x78080003,
+ 0x3908fe00,
+ 0xdc200800,
+ 0x3421fe78,
+ 0x3c210005,
+ 0x78020003,
+ 0x59010000,
+ 0x2b010868,
+ 0x38428c00,
+ 0x2c430082,
+ 0x3421fe78,
+ 0x3c210005,
+ 0x34040000,
+ 0x59010004,
+ 0x2b01086c,
+ 0x2b020910,
+ 0x8c220800,
+ 0x3421fe78,
+ 0x3c210005,
+ 0x59010008,
+ 0x2b01081c,
+ 0x59010030,
+ 0x2b010870,
+ 0x3421fe78,
+ 0x3c210005,
+ 0x59010034,
+ 0x2b010874,
+ 0x2b020910,
+ 0x8c220800,
+ 0x3421fe78,
+ 0x3c210005,
+ 0x59010038,
+ 0x2b010884,
+ 0x2b020910,
+ 0x8c220800,
+ 0x59010024,
+ 0x2b010888,
+ 0x59010028,
+ 0x2b01088c,
+ 0x2b020910,
+ 0x8c220800,
+ 0x5901002c,
+ 0x2b010890,
+ 0x88230800,
+ 0x2b020910,
+ 0x00210002,
+ 0x8c220800,
+ 0x59010050,
+ 0x2b010894,
+ 0x59010054,
+ 0x2b020898,
+ 0x2b010910,
+ 0x8c411000,
+ 0x2f010164,
+ 0x59020058,
+ 0x2021ffff,
+ 0x5901008c,
+ 0x2b01089c,
+ 0x59010090,
+ 0x2b0108a0,
+ 0x2b020910,
+ 0x8c220800,
+ 0x59010094,
+ 0x2b0108ac,
+ 0x2b020910,
+ 0x8c220800,
+ 0x59010098,
+ 0x2b0208b0,
+ 0x2b010910,
+ 0x8c411000,
+ 0x2f010162,
+ 0x5902009c,
+ 0x2021ffff,
+ 0x590100b0,
+ 0x2b0108a4,
+ 0x590100b4,
+ 0x2b0108a8,
+ 0x2b020910,
+ 0x8c220800,
+ 0x590400bc,
+ 0x590100b8,
+ 0x2b010914,
+ 0x44240006,
+ 0x2b0108b8,
+ 0x2b020914,
+ 0x8c220800,
+ 0x3c210003,
+ 0x590100c0,
+ 0x781d0003,
+ 0x59040134,
+ 0x5904013c,
+ 0x59040140,
+ 0xb8804800,
+ 0x3bbdf000,
+ 0xb5291000,
+ 0xb4581000,
+ 0x344108c8,
+ 0x2c230004,
+ 0x3d260002,
+ 0x3d250004,
+ 0x2063ffff,
+ 0x2b040910,
+ 0x08636400,
+ 0x3d210003,
+ 0xb4c83000,
+ 0x8c641800,
+ 0xc8290800,
+ 0x3c210002,
+ 0x344208d8,
+ 0xb43d0800,
+ 0x2c420004,
+ 0xb4bd2800,
+ 0x2042ffff,
+ 0x08426400,
+ 0x35240001,
+ 0x58c300d4,
+ 0x208900ff,
+ 0x28240058,
+ 0x75270007,
+ 0x29010134,
+ 0x88641800,
+ 0xb4230800,
+ 0x59010134,
+ 0x2b010910,
+ 0x8c411000,
+ 0x58c20114,
+ 0x28a10148,
+ 0x2903013c,
+ 0x29040140,
+ 0x88411000,
+ 0xb4625000,
+ 0x590a013c,
+ 0x28c10114,
+ 0x28a2014c,
+ 0x88220800,
+ 0xb4811800,
+ 0x59030140,
+ 0x44e0ffd5,
+ 0x29020134,
+ 0x34016400,
+ 0x8c611800,
+ 0x34040000,
+ 0x59040144,
+ 0x59040148,
+ 0x8c411000,
+ 0x59030140,
+ 0x8d410800,
+ 0x59020134,
+ 0x5901013c,
+ 0x2b0108f0,
+ 0x2b020910,
+ 0x8c220800,
+ 0x5901014c,
+ 0x2b0108f4,
+ 0x2b020910,
+ 0x8c220800,
+ 0x59010150,
+ 0x2b0108f8,
+ 0x2b020910,
+ 0x8c220800,
+ 0x59010154,
+ 0x2b0108ec,
+ 0x2b020910,
+ 0x08216400,
+ 0x5904015c,
+ 0x8c220800,
+ 0x59040160,
+ 0x59010158,
+ 0x2b010900,
+ 0x2b020910,
+ 0x8c220800,
+ 0x59010164,
+ 0x2b010904,
+ 0x2b020910,
+ 0x8c220800,
+ 0x5904016c,
+ 0x59010168,
+ 0x2b0208fc,
+ 0x2b010910,
+ 0x8c411000,
+ 0x2f010170,
+ 0x59020170,
+ 0x2021ffff,
+ 0x59010174,
+ 0x2b010908,
+ 0x59010178,
+ 0x2b01090c,
+ 0x2b020910,
+ 0x8c220800,
+ 0x5901017c,
+ 0xfbffff2b,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x2f020240,
+ 0x34030000,
+ 0x2f010242,
+ 0x2042ffff,
+ 0x2021ffff,
+ 0x54410002,
+ 0x34030001,
+ 0x2f0202c4,
+ 0xb4630800,
+ 0xb4380800,
+ 0x2c210240,
+ 0x780c0003,
+ 0x398c8c00,
+ 0xb4411000,
+ 0x0f02016c,
+ 0x2f01016c,
+ 0x418300bf,
+ 0x34040008,
+ 0x2f02016e,
+ 0x2021ffff,
+ 0x2042ffff,
+ 0xfbffbfc1,
+ 0x0f01016e,
+ 0x2f02016e,
+ 0x2f010170,
+ 0x50220013,
+ 0x43010174,
+ 0x7c210001,
+ 0x5c200009,
+ 0x2d810032,
+ 0x2f0b02ee,
+ 0x340203e8,
+ 0x3c210008,
+ 0x216bffff,
+ 0xf800151a,
+ 0x5d610004,
+ 0xe0000006,
+ 0x430102bc,
+ 0x5c200004,
+ 0x418100c4,
+ 0x330102bc,
+ 0xe000000f,
+ 0x2d810036,
+ 0xe0000009,
+ 0x2f02016e,
+ 0x2f010172,
+ 0x2042ffff,
+ 0x2021ffff,
+ 0x50410008,
+ 0x34010000,
+ 0x330102bc,
+ 0x2d810032,
+ 0x3c210008,
+ 0x340203e8,
+ 0xf8001506,
+ 0x0f0102ee,
+ 0xfbffc071,
+ 0x34010000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x90005800,
+ 0x34010000,
+ 0xd0010000,
+ 0x78040003,
+ 0x38848c00,
+ 0x2c830082,
+ 0x2c8100c6,
+ 0x340203e8,
+ 0x88230800,
+ 0x14210002,
+ 0x3803fd71,
+ 0x0f010170,
+ 0x2f010170,
+ 0x2021ffff,
+ 0x88230800,
+ 0x14210010,
+ 0x0f010172,
+ 0x2c810032,
+ 0x3c210008,
+ 0xf80014e7,
+ 0x78020003,
+ 0x0f0102ee,
+ 0x3842f824,
+ 0x28420000,
+ 0x780100ff,
+ 0x38210000,
+ 0xa0411000,
+ 0x00420010,
+ 0x78010003,
+ 0x38218ba8,
+ 0x78050003,
+ 0x30220015,
+ 0x3022002e,
+ 0x38a5f818,
+ 0x28a40000,
+ 0x7801ff7f,
+ 0x3821ffff,
+ 0xa0812000,
+ 0x78020080,
+ 0x38420000,
+ 0x78030003,
+ 0x78010003,
+ 0xb8822000,
+ 0x38638b24,
+ 0x38212438,
+ 0x58610054,
+ 0x58a40000,
+ 0xd00b0000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x90003000,
+ 0x34010000,
+ 0xd0010000,
+ 0x34020000,
+ 0x330202bc,
+ 0x78010003,
+ 0x330206e4,
+ 0x38218ba8,
+ 0x78050003,
+ 0x3022002e,
+ 0x30220015,
+ 0x38a5f818,
+ 0x28a40000,
+ 0x7801ff7f,
+ 0x3821ffff,
+ 0x78030003,
+ 0x78020002,
+ 0xa0812000,
+ 0x38638b24,
+ 0x38424a68,
+ 0x58620054,
+ 0x58a40000,
+ 0xd0060000,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x430202b8,
+ 0x78050003,
+ 0x7801c201,
+ 0x38a58acc,
+ 0x3821c43c,
+ 0x204200ff,
+ 0x340b0000,
+ 0x51620003,
+ 0x430202b8,
+ 0x204b00ff,
+ 0x430202bc,
+ 0x204200ff,
+ 0x51620003,
+ 0x430202bc,
+ 0x204b00ff,
+ 0x430202b9,
+ 0x204200ff,
+ 0x51620003,
+ 0x430202b9,
+ 0x204b00ff,
+ 0x430202bf,
+ 0x21640007,
+ 0x204200ff,
+ 0x444b0009,
+ 0x28a20020,
+ 0x3c840001,
+ 0x3403fff1,
+ 0xa0431000,
+ 0xb8441000,
+ 0x38420001,
+ 0x58a20020,
+ 0xfbffed5e,
+ 0x34010000,
+ 0x330b02bf,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0xb8203000,
+ 0x44600021,
+ 0x20610003,
+ 0x5c200005,
+ 0x20c10003,
+ 0x5c200003,
+ 0x20410003,
+ 0x4420000e,
+ 0x3463ffff,
+ 0x6461ffff,
+ 0xb8402800,
+ 0xb8c02000,
+ 0x5c200016,
+ 0x40a10000,
+ 0x3463ffff,
+ 0x6462ffff,
+ 0x30810000,
+ 0x34a50001,
+ 0x34840001,
+ 0x4440fffa,
+ 0xe000000e,
+ 0x00630002,
+ 0xb8402800,
+ 0x3463ffff,
+ 0x6461ffff,
+ 0xb8c02000,
+ 0x5c200008,
+ 0x28a10000,
+ 0x3463ffff,
+ 0x6462ffff,
+ 0x58810000,
+ 0x34a50004,
+ 0x34840004,
+ 0x4440fffa,
+ 0xb8c00800,
+ 0xc3a00000,
+ 0x78030003,
+ 0xb8201000,
+ 0x3863861c,
+ 0x34040000,
+ 0x2021000f,
+ 0x5c240003,
+ 0x00420004,
+ 0x34040004,
+ 0x2041000f,
+ 0xb4230800,
+ 0x40210000,
+ 0xb4810800,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780b0003,
+ 0x396b98d8,
+ 0x29610008,
+ 0x5c200019,
+ 0x2961000c,
+ 0xfbffffeb,
+ 0x3c220002,
+ 0x74210007,
+ 0xb44b1000,
+ 0x5c200013,
+ 0x28430014,
+ 0x78048000,
+ 0x78068000,
+ 0x78058000,
+ 0x38848000,
+ 0x38c68004,
+ 0x38a50420,
+ 0x4460000b,
+ 0x28620020,
+ 0x29610034,
+ 0x59630000,
+ 0xa0220800,
+ 0x58810000,
+ 0x29610038,
+ 0x28620024,
+ 0xa0220800,
+ 0x58c10000,
+ 0x58a30000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x90001800,
+ 0x34010000,
+ 0xd0010000,
+ 0x78020003,
+ 0x384298d8,
+ 0x28410008,
+ 0x34210001,
+ 0x58410008,
+ 0xd0030000,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x90002000,
+ 0x34010000,
+ 0xd0010000,
+ 0x78050003,
+ 0xb8a01800,
+ 0x386398d8,
+ 0x28610008,
+ 0x3422ffff,
+ 0x44200002,
+ 0x58620008,
+ 0xd0040000,
+ 0xb8a01000,
+ 0x384298d8,
+ 0x28410008,
+ 0x5c200004,
+ 0x28410004,
+ 0x5c200002,
+ 0xfbffb6f6,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b8d0004,
+ 0x780c0003,
+ 0xb9805800,
+ 0x396b98d8,
+ 0x34080000,
+ 0x340d0001,
+ 0x35690014,
+ 0xbda82800,
+ 0x75020007,
+ 0x29610010,
+ 0x35080001,
+ 0x750a0007,
+ 0xa0250800,
+ 0x44200019,
+ 0x5c400018,
+ 0x29240000,
+ 0x44800016,
+ 0x2881000c,
+ 0xb9803000,
+ 0x38c698d8,
+ 0x3423ffff,
+ 0xa4a03800,
+ 0x5883000c,
+ 0x5c60000f,
+ 0x28c10010,
+ 0x28820010,
+ 0xa0270800,
+ 0x58c10010,
+ 0x44400005,
+ 0x28410000,
+ 0x58830010,
+ 0xa0270800,
+ 0x58410000,
+ 0x28c1000c,
+ 0xb8250800,
+ 0x58c1000c,
+ 0x34010001,
+ 0x5881001c,
+ 0x35290004,
+ 0x4540ffe0,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b8d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78050003,
+ 0xb8a02000,
+ 0x388498d8,
+ 0x28820004,
+ 0xb8201800,
+ 0x3401ffff,
+ 0x5c400018,
+ 0xb8400800,
+ 0x44600016,
+ 0x28810000,
+ 0x5823000c,
+ 0x90003800,
+ 0xd0020000,
+ 0x38a598d8,
+ 0x28a60000,
+ 0x28a30010,
+ 0x34020001,
+ 0x28c10008,
+ 0x28a4000c,
+ 0xbc410800,
+ 0xb8611800,
+ 0x58a30010,
+ 0x28c10008,
+ 0xbc411000,
+ 0xa4401000,
+ 0xa0822000,
+ 0x58a4000c,
+ 0xd0070000,
+ 0xfbffb6a4,
+ 0x34010000,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0xb8205800,
+ 0x90006000,
+ 0x34010000,
+ 0xd0010000,
+ 0x29610000,
+ 0xfbffff53,
+ 0x34020001,
+ 0xbc412800,
+ 0x78030003,
+ 0x3c220002,
+ 0x386398d8,
+ 0x74210007,
+ 0xa4a02000,
+ 0xb4431000,
+ 0x5c200016,
+ 0x29610000,
+ 0x28420014,
+ 0x34060000,
+ 0xa0240800,
+ 0x59610000,
+ 0x28610010,
+ 0xa0240800,
+ 0x58610010,
+ 0x44460006,
+ 0x5846001c,
+ 0x2861000c,
+ 0x58460010,
+ 0xb8250800,
+ 0x5861000c,
+ 0xd00c0000,
+ 0x78010003,
+ 0x382198d8,
+ 0x28210004,
+ 0x5c20000c,
+ 0xfbffb679,
+ 0xe000000a,
+ 0x29610004,
+ 0x29620008,
+ 0x34230001,
+ 0x54410004,
+ 0xd00c0000,
+ 0x3401fffb,
+ 0xe0000004,
+ 0x59630004,
+ 0xd00c0000,
+ 0x34010000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780b0003,
+ 0xb9601800,
+ 0x386398d8,
+ 0x28640004,
+ 0xb8202800,
+ 0xb8404000,
+ 0x3401ffff,
+ 0x5c800027,
+ 0x90003000,
+ 0xd0040000,
+ 0x28a10004,
+ 0xb9602000,
+ 0x388498d8,
+ 0x34070001,
+ 0x3422ffff,
+ 0x44200005,
+ 0x58a20004,
+ 0xd0060000,
+ 0x34010000,
+ 0xe000001b,
+ 0x28830000,
+ 0x28a20000,
+ 0x28610008,
+ 0x58650010,
+ 0xbce10800,
+ 0xb8411000,
+ 0x58a20000,
+ 0x28610008,
+ 0x2882000c,
+ 0xbce10800,
+ 0xa4200800,
+ 0xa0411000,
+ 0x5882000c,
+ 0x45000007,
+ 0x28620008,
+ 0x5868000c,
+ 0x28810010,
+ 0xbce21000,
+ 0xb8220800,
+ 0x58810010,
+ 0xd0060000,
+ 0xfbffb63c,
+ 0x396b98d8,
+ 0x29610000,
+ 0x2821001c,
+ 0x7c210000,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0xb8202000,
+ 0x90001000,
+ 0x34010000,
+ 0xd0010000,
+ 0x28810004,
+ 0x3423ffff,
+ 0x44200005,
+ 0x58830004,
+ 0xd0020000,
+ 0x34010000,
+ 0xc3a00000,
+ 0xd0020000,
+ 0x34010001,
+ 0xc3a00000,
+ 0xb8202000,
+ 0x90001800,
+ 0x34010000,
+ 0xd0010000,
+ 0x28810008,
+ 0x50220004,
+ 0xd0030000,
+ 0x3401fffb,
+ 0xc3a00000,
+ 0x58820004,
+ 0xd0030000,
+ 0x34010000,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x382198d8,
+ 0x28220000,
+ 0x28410018,
+ 0x28420014,
+ 0xd8400000,
+ 0x90002800,
+ 0x34010000,
+ 0xd0010000,
+ 0x78020003,
+ 0x384298d8,
+ 0x28410000,
+ 0x2843000c,
+ 0x28240008,
+ 0x34010001,
+ 0xbc240800,
+ 0xa4200800,
+ 0xa0611800,
+ 0x5843000c,
+ 0xd0050000,
+ 0xfbffb602,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b8d0004,
+ 0x3c470002,
+ 0xb8404800,
+ 0x34020001,
+ 0x780b0003,
+ 0x396b98d8,
+ 0xbc496000,
+ 0xb4eb3800,
+ 0x28e20014,
+ 0x340dffff,
+ 0x3408fffd,
+ 0x5c400014,
+ 0x780a0002,
+ 0x3488ff78,
+ 0x58250014,
+ 0x58260018,
+ 0x58230004,
+ 0x58290008,
+ 0x394a04f4,
+ 0x44800005,
+ 0x58280000,
+ 0x59040070,
+ 0x590a0078,
+ 0x59020074,
+ 0x582d0024,
+ 0x582d0020,
+ 0x58e10014,
+ 0x2961000c,
+ 0xb8404000,
+ 0xb82c0800,
+ 0x5961000c,
+ 0xb9000800,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b8d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x78198008,
+ 0x3b390000,
+ 0xc3a00000,
+ 0x78038008,
+ 0x38630000,
+ 0x586100a0,
+ 0x586200a4,
+ 0xc3a00000,
+ 0x78028008,
+ 0x38420000,
+ 0x584100a0,
+ 0x284100a4,
+ 0xc3a00000,
+ 0x78038008,
+ 0x38630000,
+ 0x586100a0,
+ 0x286100a4,
+ 0xb8220800,
+ 0x586100a4,
+ 0xc3a00000,
+ 0x78038008,
+ 0x38630000,
+ 0x586100a0,
+ 0x286100a4,
+ 0xa0220800,
+ 0x586100a4,
+ 0xc3a00000,
+ 0x78048008,
+ 0x38840000,
+ 0x588100a0,
+ 0x288100a4,
+ 0xa4601800,
+ 0xa0230800,
+ 0xb8220800,
+ 0x588100a4,
+ 0xc3a00000,
+ 0x78038008,
+ 0x38630000,
+ 0x586100a0,
+ 0x286100a4,
+ 0xa0410800,
+ 0x5c22fffe,
+ 0xc3a00000,
+ 0x78038008,
+ 0x38630000,
+ 0x586100a0,
+ 0x286100a4,
+ 0xa0410800,
+ 0x4422fffe,
+ 0xc3a00000,
+ 0x78048008,
+ 0x38840000,
+ 0x3803ca00,
+ 0xb4831800,
+ 0x58610000,
+ 0x3801ca04,
+ 0xb4812000,
+ 0x58820000,
+ 0xc3a00000,
+ 0x78038008,
+ 0x38630000,
+ 0x3802ca00,
+ 0xb4621000,
+ 0x58410000,
+ 0x3801ca04,
+ 0xb4611800,
+ 0x28610000,
+ 0xc3a00000,
+ 0x78048008,
+ 0x38840000,
+ 0x3803ca00,
+ 0xb4831800,
+ 0x58610000,
+ 0x3801ca04,
+ 0xb4812000,
+ 0x28810000,
+ 0xb8220800,
+ 0x58810000,
+ 0xc3a00000,
+ 0x78048008,
+ 0x38840000,
+ 0x3803ca00,
+ 0xb4831800,
+ 0x58610000,
+ 0x3801ca04,
+ 0xb4812000,
+ 0x28810000,
+ 0xa0220800,
+ 0x58810000,
+ 0xc3a00000,
+ 0x78058008,
+ 0x38a50000,
+ 0x3804ca00,
+ 0xb4a42000,
+ 0x58810000,
+ 0x3801ca04,
+ 0xb4a12800,
+ 0x28a10000,
+ 0xa4601800,
+ 0xa0230800,
+ 0xb8220800,
+ 0x58a10000,
+ 0xc3a00000,
+ 0x78058001,
+ 0x34030001,
+ 0x38a50800,
+ 0x78048001,
+ 0x30a30002,
+ 0x38840824,
+ 0x78028001,
+ 0x30830002,
+ 0x38420848,
+ 0x30430002,
+ 0x58a3000c,
+ 0x5883000c,
+ 0x5843000c,
+ 0x30a30005,
+ 0x30830005,
+ 0x30430005,
+ 0xc3a00000,
+ 0x3c220003,
+ 0x78038001,
+ 0xb4411000,
+ 0x3c420002,
+ 0x38630800,
+ 0xb4431000,
+ 0x34030001,
+ 0x30430002,
+ 0x5843000c,
+ 0x30430005,
+ 0xc3a00000,
+ 0x3c220003,
+ 0x78038001,
+ 0xb4411000,
+ 0x3c420002,
+ 0x38630800,
+ 0xb4431000,
+ 0x34010000,
+ 0x30410000,
+ 0x5841000c,
+ 0xc3a00000,
+ 0xb8201800,
+ 0x78048001,
+ 0x64210001,
+ 0x38840800,
+ 0x5c20000a,
+ 0x64650002,
+ 0x4460000c,
+ 0x78048001,
+ 0x64610007,
+ 0x38840848,
+ 0x5ca00008,
+ 0x78048001,
+ 0x5c200005,
+ 0xc3a00000,
+ 0x78048001,
+ 0x38840824,
+ 0xe0000002,
+ 0x388408fc,
+ 0x58820010,
+ 0x34010001,
+ 0x30810001,
+ 0x30810000,
+ 0xc3a00000,
+ 0x90001800,
+ 0x34010000,
+ 0xd0010000,
+ 0x7801c020,
+ 0x382100c8,
+ 0x28220000,
+ 0x7801c020,
+ 0x382100cc,
+ 0x28210000,
+ 0xd0030000,
+ 0x00420004,
+ 0x3c21001c,
+ 0xb8220800,
+ 0xc3a00000,
+ 0x90001000,
+ 0x34010000,
+ 0xd0010000,
+ 0x7801c020,
+ 0x382100c8,
+ 0x28240000,
+ 0x7801c020,
+ 0x382100cc,
+ 0x28230000,
+ 0xd0020000,
+ 0x34010000,
+ 0xb8242000,
+ 0xb8611800,
+ 0xb8600800,
+ 0xb8801000,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0xb8205800,
+ 0x44200010,
+ 0xfbffffea,
+ 0xb8402000,
+ 0xb44b1000,
+ 0xb8201800,
+ 0x34050000,
+ 0xf4823800,
+ 0xb4650800,
+ 0xb4e13800,
+ 0xb8e05800,
+ 0xb8406000,
+ 0xfbffffe0,
+ 0xb8201800,
+ 0x5563fffe,
+ 0x5d630002,
+ 0x5582fffc,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x780a8002,
+ 0x394a8000,
+ 0x29480000,
+ 0x3c21000a,
+ 0x3409c3ff,
+ 0x20213c00,
+ 0xa1094000,
+ 0xb9014000,
+ 0x59480000,
+ 0x29410000,
+ 0x3c42000e,
+ 0x3408bfff,
+ 0x20424000,
+ 0xa0280800,
+ 0xb8220800,
+ 0x59410000,
+ 0x29420000,
+ 0x3c63000f,
+ 0x7801ffff,
+ 0x38217fff,
+ 0xa0411000,
+ 0x20638000,
+ 0xb8431000,
+ 0x59420000,
+ 0x29430000,
+ 0x3c840010,
+ 0x7801ff00,
+ 0x780200ff,
+ 0x3821ffff,
+ 0x38420000,
+ 0xa0611800,
+ 0xa0822000,
+ 0xb8641800,
+ 0x59430000,
+ 0x29430000,
+ 0x3ca5001a,
+ 0x7801e3ff,
+ 0x78021c00,
+ 0x3821ffff,
+ 0x38420000,
+ 0xa0611800,
+ 0xa0a22800,
+ 0xb8651800,
+ 0x59430000,
+ 0x29430000,
+ 0x3cc60018,
+ 0x7801fcff,
+ 0x78020300,
+ 0x3821ffff,
+ 0x38420000,
+ 0xa0611800,
+ 0xa0c23000,
+ 0xb8661800,
+ 0x59430000,
+ 0x29430000,
+ 0x3ce7001d,
+ 0x7801dfff,
+ 0x78022000,
+ 0x3821ffff,
+ 0x38420000,
+ 0xa0611800,
+ 0xa0e23800,
+ 0xb8671800,
+ 0x59430000,
+ 0xc3a00000,
+ 0x780a8002,
+ 0x394a8048,
+ 0x29480000,
+ 0x3409fff0,
+ 0x2021000f,
+ 0xa1094000,
+ 0xb9014000,
+ 0x59480000,
+ 0x29410000,
+ 0x3c420004,
+ 0x3408ffef,
+ 0x20420010,
+ 0xa0280800,
+ 0xb8220800,
+ 0x59410000,
+ 0x29410000,
+ 0x3c630005,
+ 0x3402ffdf,
+ 0xa0220800,
+ 0x20630020,
+ 0xb8230800,
+ 0x59410000,
+ 0x29420000,
+ 0x3c840008,
+ 0x7801ffff,
+ 0x382100ff,
+ 0xa0411000,
+ 0x2084ff00,
+ 0xb8441000,
+ 0x59420000,
+ 0x29430000,
+ 0x3ca50010,
+ 0x7801fff8,
+ 0x78020007,
+ 0x3821ffff,
+ 0x38420000,
+ 0xa0611800,
+ 0xa0a22800,
+ 0xb8651800,
+ 0x59430000,
+ 0x29410000,
+ 0x3cc60006,
+ 0x3402ff3f,
+ 0xa0220800,
+ 0x20c600c0,
+ 0xb8260800,
+ 0x59410000,
+ 0x29430000,
+ 0x3ce70013,
+ 0x7801fff7,
+ 0x78020008,
+ 0x3821ffff,
+ 0x38420000,
+ 0xa0611800,
+ 0xa0e23800,
+ 0xb8671800,
+ 0x59430000,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b8c0004,
+ 0x780a0003,
+ 0xb9402800,
+ 0x38a58dd4,
+ 0x28a60000,
+ 0x78080003,
+ 0x39088dae,
+ 0x34c60001,
+ 0x20c6ffff,
+ 0x41070000,
+ 0x58a60000,
+ 0xb8204800,
+ 0xb8402800,
+ 0xb8605800,
+ 0xb8806000,
+ 0x5ce00007,
+ 0x78028002,
+ 0x38428000,
+ 0x28410030,
+ 0x20210001,
+ 0x4420fffe,
+ 0xe0000003,
+ 0x34010000,
+ 0x31010000,
+ 0xb9400800,
+ 0x38218dd4,
+ 0x78028002,
+ 0x38428000,
+ 0x28240000,
+ 0x28430000,
+ 0x00a50005,
+ 0x3401fc00,
+ 0xa0611800,
+ 0x208403ff,
+ 0x3d26001b,
+ 0xb8641800,
+ 0x01210005,
+ 0x58430000,
+ 0xb8a62800,
+ 0x58450004,
+ 0x20210007,
+ 0x58410008,
+ 0x584b000c,
+ 0xb8402800,
+ 0x34040000,
+ 0x3c820002,
+ 0xb44c0800,
+ 0x28230000,
+ 0x34840001,
+ 0xb4451000,
+ 0x68810007,
+ 0x58430010,
+ 0x4420fff9,
+ 0x394a8dd4,
+ 0x29410000,
+ 0x2b8b0008,
+ 0x2b8c0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x78020003,
+ 0x78040003,
+ 0x38428de0,
+ 0x38848e28,
+ 0x34030001,
+ 0x3043000f,
+ 0x58810000,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0xb8206000,
+ 0xb8405800,
+ 0x7801c201,
+ 0x3821c530,
+ 0x34020026,
+ 0xfbffea21,
+ 0x7801c201,
+ 0xb9601000,
+ 0x3821c534,
+ 0xfbffea1d,
+ 0x7801c201,
+ 0x3821c538,
+ 0xb9801000,
+ 0xfbffea19,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x78038008,
+ 0x38630000,
+ 0x28650194,
+ 0x34040125,
+ 0x38a60001,
+ 0x58660194,
+ 0x58640190,
+ 0x58610198,
+ 0x38a10005,
+ 0x58610194,
+ 0x58660194,
+ 0x58620198,
+ 0x38a50003,
+ 0x58650194,
+ 0x58660194,
+ 0xc3a00000,
+ 0x78060003,
+ 0x38c6f320,
+ 0x28c60000,
+ 0x7807c020,
+ 0x38e7012c,
+ 0x20c60080,
+ 0x00ca0007,
+ 0x208400ff,
+ 0xb8a14800,
+ 0xb8404000,
+ 0x44c0000f,
+ 0x78010002,
+ 0x38210000,
+ 0xb8a31800,
+ 0x78020001,
+ 0xb8611800,
+ 0xb8a80800,
+ 0x38420000,
+ 0x58e90000,
+ 0xb8220800,
+ 0x51440002,
+ 0x58e10000,
+ 0x34010002,
+ 0x50240002,
+ 0x58e30000,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0x3422ffff,
+ 0x340c0000,
+ 0x74410004,
+ 0xb9801800,
+ 0x340d0001,
+ 0xb9802000,
+ 0xb9805800,
+ 0x5c2c0022,
+ 0x3c410002,
+ 0x78020003,
+ 0x3842862c,
+ 0xb4220800,
+ 0x28210000,
+ 0xc0200000,
+ 0x78010003,
+ 0x3821f334,
+ 0x28220000,
+ 0x780b0002,
+ 0x396b0000,
+ 0x78018000,
+ 0x38210000,
+ 0xa0411000,
+ 0x34030001,
+ 0x4c400012,
+ 0xe0000004,
+ 0x780b0001,
+ 0x34030001,
+ 0x396b0000,
+ 0xb8602000,
+ 0xe000000c,
+ 0x780b0100,
+ 0x396b0000,
+ 0x340c0002,
+ 0xe0000008,
+ 0x780b0008,
+ 0x396b0000,
+ 0xe0000003,
+ 0x780b0004,
+ 0x396b0000,
+ 0x340d0000,
+ 0x340c0001,
+ 0x78010003,
+ 0x3821f330,
+ 0x28220000,
+ 0x64630000,
+ 0xb9625800,
+ 0x582b0000,
+ 0x5c600006,
+ 0x78020003,
+ 0x3842f320,
+ 0x28410000,
+ 0x38210010,
+ 0x58410000,
+ 0x64810000,
+ 0x5c200009,
+ 0x78020003,
+ 0x38428de0,
+ 0x34030001,
+ 0x78010003,
+ 0x3043000d,
+ 0x38218eac,
+ 0xfbfffd18,
+ 0x340d0000,
+ 0x45800005,
+ 0x78010003,
+ 0x3821f300,
+ 0x28220000,
+ 0x58220000,
+ 0x01610010,
+ 0x34020000,
+ 0x78050090,
+ 0x38a50000,
+ 0xb8401800,
+ 0x34040001,
+ 0xfbffff97,
+ 0xb9a00800,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x7801c201,
+ 0x34020065,
+ 0x3821c530,
+ 0xfbffe98d,
+ 0x7801c201,
+ 0x3821c534,
+ 0xfbffe9a4,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x78038008,
+ 0x38630000,
+ 0x28610194,
+ 0x3402ffc0,
+ 0xa0220800,
+ 0x38210001,
+ 0x58610194,
+ 0x34010124,
+ 0x58610190,
+ 0x28610198,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78030003,
+ 0x38638acc,
+ 0x28620048,
+ 0x78010001,
+ 0x38210000,
+ 0xb8411000,
+ 0x38420001,
+ 0x7801c201,
+ 0x58620048,
+ 0x3821c50c,
+ 0xfbffe96f,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x34060000,
+ 0x78070003,
+ 0x202900ff,
+ 0x204800ff,
+ 0x38e7f000,
+ 0xb8c02800,
+ 0x340a00ff,
+ 0xb5051000,
+ 0x204200ff,
+ 0x2041001f,
+ 0x00210004,
+ 0x2043000c,
+ 0x34210001,
+ 0xb5210800,
+ 0x3c210004,
+ 0x20420003,
+ 0xb8270800,
+ 0xb4230800,
+ 0xc8451000,
+ 0x28240000,
+ 0x3ca30003,
+ 0x3c420003,
+ 0x34a10001,
+ 0x80822000,
+ 0xbd431800,
+ 0x202500ff,
+ 0xa0832000,
+ 0x74a10003,
+ 0xb8c43000,
+ 0x4420ffea,
+ 0xb8c00800,
+ 0xc3a00000,
+ 0x28240004,
+ 0x28450004,
+ 0x28280000,
+ 0x2084ffff,
+ 0x20a5ffff,
+ 0xb4852000,
+ 0x2087ffff,
+ 0x58670004,
+ 0x28250004,
+ 0x28460004,
+ 0x00840010,
+ 0x00a50010,
+ 0x00c60010,
+ 0x28420000,
+ 0xb4a62800,
+ 0xb4852000,
+ 0x3c810010,
+ 0x00840010,
+ 0xb8e13800,
+ 0xb4882000,
+ 0xb4822000,
+ 0x58640000,
+ 0x58670004,
+ 0xc3a00000,
+ 0x34060000,
+ 0x204700ff,
+ 0x202300ff,
+ 0xb8c02000,
+ 0xbce42800,
+ 0x34820004,
+ 0x20610001,
+ 0x204400ff,
+ 0x00630001,
+ 0x64210000,
+ 0x7482001f,
+ 0x5c200002,
+ 0xb8c53000,
+ 0x4440fff7,
+ 0xb8c00800,
+ 0xc3a00000,
+ 0x00660002,
+ 0x34080000,
+ 0x20630003,
+ 0x3cc40002,
+ 0x3c630003,
+ 0xb8205000,
+ 0xb4812000,
+ 0xb9003800,
+ 0x28850000,
+ 0x80a32800,
+ 0x20a100ff,
+ 0xbc272800,
+ 0x34630008,
+ 0x34e70008,
+ 0x74e9001f,
+ 0x7c610020,
+ 0xb9054000,
+ 0x5c200007,
+ 0x34c60001,
+ 0x34840004,
+ 0x34030000,
+ 0x5cc20003,
+ 0xb8603000,
+ 0xb9402000,
+ 0x4520fff0,
+ 0xb9000800,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x78060003,
+ 0x38c68dd8,
+ 0x28c70000,
+ 0x780c8002,
+ 0x398c8000,
+ 0x34e70001,
+ 0x20e5ffff,
+ 0x58c50000,
+ 0x004e0005,
+ 0x29850000,
+ 0xb8205800,
+ 0x3d62001b,
+ 0x016d0005,
+ 0x3401fc00,
+ 0xa0a12800,
+ 0x20e703ff,
+ 0x016b0008,
+ 0xb8a72800,
+ 0x208400ff,
+ 0x34010000,
+ 0xb8607800,
+ 0xb9c27000,
+ 0x59850000,
+ 0xb8803800,
+ 0x216b00ff,
+ 0xb8201000,
+ 0xb8201800,
+ 0x34040037,
+ 0xb8202800,
+ 0xb8203000,
+ 0x3d6b0003,
+ 0xfbfffdf8,
+ 0x21ad0007,
+ 0x598e0004,
+ 0xb9ab6800,
+ 0x598d0008,
+ 0x598f000c,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b8c0004,
+ 0x20640003,
+ 0x780a8002,
+ 0xb8406000,
+ 0x3c840003,
+ 0x00630002,
+ 0xb8205800,
+ 0x394a8000,
+ 0x34020000,
+ 0x3c610002,
+ 0x34080000,
+ 0xb42b3000,
+ 0xb9003800,
+ 0x28c50000,
+ 0x80a42800,
+ 0x20a100ff,
+ 0xbc272800,
+ 0x34840008,
+ 0x34e70008,
+ 0x74e9001f,
+ 0x7c810020,
+ 0xb9054000,
+ 0x5c200007,
+ 0x34630001,
+ 0x34c60004,
+ 0x34040000,
+ 0x5c6c0003,
+ 0xb8801800,
+ 0xb9603000,
+ 0x4520fff0,
+ 0x34420001,
+ 0x59480010,
+ 0x74410007,
+ 0x354a0004,
+ 0x4420ffe7,
+ 0x2b8b0008,
+ 0x2b8c0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b8d0004,
+ 0x20a500ff,
+ 0x00a60001,
+ 0xb8406000,
+ 0x208400ff,
+ 0x20a50001,
+ 0x206200ff,
+ 0x3c840002,
+ 0x7ca80001,
+ 0x202d00ff,
+ 0x20c60001,
+ 0x340b0000,
+ 0x7807c210,
+ 0x7809c210,
+ 0x21830004,
+ 0x780ac210,
+ 0x5ccb0004,
+ 0x38e70008,
+ 0x58eb0000,
+ 0xe0000007,
+ 0x38e70008,
+ 0x34010002,
+ 0x58e10000,
+ 0x34050001,
+ 0x5d000002,
+ 0xb8a05800,
+ 0xbc431800,
+ 0x3401fff8,
+ 0x3ca20001,
+ 0xa1810800,
+ 0xb8220800,
+ 0x206200ff,
+ 0xb8242000,
+ 0x39290014,
+ 0x3c420008,
+ 0x59240000,
+ 0x394a0018,
+ 0xb9a22000,
+ 0xb9600800,
+ 0x59440000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b8d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cffe4,
+ 0x5b8b001c,
+ 0x5b8c0018,
+ 0x5b8d0014,
+ 0x5b8e0010,
+ 0x5b8f000c,
+ 0x5b900008,
+ 0x5b9d0004,
+ 0x7803c210,
+ 0x7810c210,
+ 0x3863001c,
+ 0xba002000,
+ 0x58610000,
+ 0x38840008,
+ 0x28810000,
+ 0x780f0003,
+ 0xb9e01800,
+ 0x38210001,
+ 0x58810000,
+ 0x3863f334,
+ 0x28630000,
+ 0x78017f00,
+ 0x38210000,
+ 0xa0611800,
+ 0x006d0018,
+ 0x204e00ff,
+ 0x65ab0000,
+ 0x340c0000,
+ 0xe58d1800,
+ 0x3d840010,
+ 0x65620000,
+ 0x7801007f,
+ 0x38210000,
+ 0xa0431000,
+ 0xa0812000,
+ 0xb9e03800,
+ 0xba003000,
+ 0x7805ff80,
+ 0x64420000,
+ 0x7d610000,
+ 0x38e7f334,
+ 0x38c60008,
+ 0x38a5ffff,
+ 0x358c0001,
+ 0x5c200005,
+ 0x28e10000,
+ 0xa0250800,
+ 0xb8240800,
+ 0x58e10000,
+ 0x28c10000,
+ 0x20210010,
+ 0x5c200011,
+ 0x28c10000,
+ 0x3402fffe,
+ 0xa0220800,
+ 0x58c10000,
+ 0x5dc00005,
+ 0x28c10000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0x58c10000,
+ 0x78010003,
+ 0x3821f320,
+ 0x28220000,
+ 0x3403ffef,
+ 0xa0431000,
+ 0x58220000,
+ 0xe0000006,
+ 0x5c40ffd8,
+ 0x340b0001,
+ 0xb9600800,
+ 0xfbfffe4b,
+ 0x5c20ffd4,
+ 0x2b8b001c,
+ 0x2b8c0018,
+ 0x2b8d0014,
+ 0x2b8e0010,
+ 0x2b8f000c,
+ 0x2b900008,
+ 0x2b9d0004,
+ 0x379c001c,
+ 0xc3a00000,
+ 0x379cffe0,
+ 0x5b8b0020,
+ 0x5b8c001c,
+ 0x5b8d0018,
+ 0x5b8e0014,
+ 0x5b8f0010,
+ 0x5b90000c,
+ 0x5b910008,
+ 0x5b9d0004,
+ 0x78060003,
+ 0x38c68de0,
+ 0x40c4000c,
+ 0xb8202800,
+ 0xb8404000,
+ 0x206f00ff,
+ 0xb8800800,
+ 0x44800062,
+ 0xb5e60800,
+ 0x4027001c,
+ 0x5ce0000e,
+ 0x3de10002,
+ 0x20a2ffff,
+ 0xb4261800,
+ 0x28610040,
+ 0x44410002,
+ 0x34070001,
+ 0x28620038,
+ 0x3401f000,
+ 0xa1010800,
+ 0x44220003,
+ 0x38e70001,
+ 0xe0000002,
+ 0x20e700ff,
+ 0x3401f000,
+ 0xa1010800,
+ 0x78110003,
+ 0xba204000,
+ 0x20a5ffff,
+ 0x39088de0,
+ 0x3df00002,
+ 0x00260018,
+ 0x3ca30008,
+ 0x29040030,
+ 0xb6081000,
+ 0x58410038,
+ 0xb8c33000,
+ 0x58450040,
+ 0x54860005,
+ 0x29010034,
+ 0x54c10003,
+ 0x34010000,
+ 0xe000003f,
+ 0x44e00038,
+ 0xba206000,
+ 0x398c8de0,
+ 0xb60c0800,
+ 0x282b0038,
+ 0x282d0040,
+ 0x29820020,
+ 0x016b000c,
+ 0x3de10003,
+ 0x3d6b000c,
+ 0x202e00ff,
+ 0x34010000,
+ 0xb44e1000,
+ 0x3403000f,
+ 0xb8202000,
+ 0xb8202800,
+ 0xfbffff3a,
+ 0x396b0067,
+ 0xb9600800,
+ 0x34020000,
+ 0xfbffff66,
+ 0x29820020,
+ 0x35c10004,
+ 0x202e00ff,
+ 0x34010000,
+ 0xb44e1000,
+ 0x3403000f,
+ 0xb8202000,
+ 0xb8202800,
+ 0xfbffff2d,
+ 0x21ad00ff,
+ 0xb9a00800,
+ 0x34020000,
+ 0xfbffff59,
+ 0x78018008,
+ 0x38210000,
+ 0x34020001,
+ 0x5822147c,
+ 0x58221478,
+ 0xb8201000,
+ 0x2841147c,
+ 0x20210001,
+ 0x64210000,
+ 0x5c20fffd,
+ 0x3a318de0,
+ 0xb6111000,
+ 0x28410038,
+ 0x28430040,
+ 0x780500e0,
+ 0x38a50000,
+ 0x00220010,
+ 0x2063ffff,
+ 0x2021ffff,
+ 0xb82f0800,
+ 0x34040003,
+ 0xfbfffdbb,
+ 0x78010003,
+ 0x38218de0,
+ 0xb5e10800,
+ 0x34020000,
+ 0x3022001c,
+ 0x34010001,
+ 0x2b8b0020,
+ 0x2b8c001c,
+ 0x2b8d0018,
+ 0x2b8e0014,
+ 0x2b8f0010,
+ 0x2b90000c,
+ 0x2b910008,
+ 0x2b9d0004,
+ 0x379c0020,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x206300ff,
+ 0x7c650000,
+ 0xb8403000,
+ 0x202700ff,
+ 0x34040002,
+ 0x5087000e,
+ 0x5ca00006,
+ 0x78010003,
+ 0x3821f320,
+ 0x28210000,
+ 0x20210080,
+ 0x44200028,
+ 0x00c20010,
+ 0x78050080,
+ 0x38a50000,
+ 0x20c1ffff,
+ 0x34030000,
+ 0xfbfffd95,
+ 0xe0000021,
+ 0x44a00020,
+ 0x34040000,
+ 0xb8802800,
+ 0x34a10001,
+ 0x202500ff,
+ 0x3c620001,
+ 0x20610008,
+ 0x74a80003,
+ 0x3c840008,
+ 0x204300ff,
+ 0x44200002,
+ 0x388400ff,
+ 0x4500fff7,
+ 0x3cec0002,
+ 0x78010003,
+ 0x3821f324,
+ 0xb5816000,
+ 0x298b0000,
+ 0xa4800800,
+ 0xa0c43000,
+ 0xa1615800,
+ 0x3ce10014,
+ 0x78050020,
+ 0xb9665800,
+ 0x38a50000,
+ 0xb4252800,
+ 0x01620010,
+ 0x2161ffff,
+ 0x34030000,
+ 0x34040002,
+ 0xfbfffd75,
+ 0x598b0000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x202b00ff,
+ 0x3d610014,
+ 0x780500a0,
+ 0x204cffff,
+ 0x38a50000,
+ 0x34020000,
+ 0xb4252800,
+ 0xb9800800,
+ 0xb8401800,
+ 0x34040001,
+ 0xfbfffd60,
+ 0x3d6b0002,
+ 0x78010003,
+ 0x3821f330,
+ 0xb5615800,
+ 0x29620000,
+ 0x7801ffff,
+ 0x38210000,
+ 0xa0411000,
+ 0xb84c1000,
+ 0x59620000,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x34230003,
+ 0x34040000,
+ 0x3406fffc,
+ 0x34050003,
+ 0xa0660800,
+ 0x28220000,
+ 0x3c840008,
+ 0x34a5ffff,
+ 0x20610003,
+ 0x3c210003,
+ 0x3463ffff,
+ 0x80411000,
+ 0x204200ff,
+ 0xb8822000,
+ 0x4ca0fff6,
+ 0xb8800800,
+ 0xc3a00000,
+ 0xb8403000,
+ 0x206500ff,
+ 0xb8202000,
+ 0x340afffc,
+ 0x340900ff,
+ 0x34070003,
+ 0x20810003,
+ 0x3c210003,
+ 0x20c200ff,
+ 0xbd211800,
+ 0xbc411000,
+ 0xa08a4000,
+ 0x20a10001,
+ 0x00c60008,
+ 0x00a50001,
+ 0x64210000,
+ 0xa4601800,
+ 0x34840001,
+ 0x34e7ffff,
+ 0x5c200005,
+ 0x29010000,
+ 0xa0230800,
+ 0xb8220800,
+ 0x59010000,
+ 0x4ce0ffee,
+ 0xc3a00000,
+ 0x7803c210,
+ 0x38630008,
+ 0x28620000,
+ 0x202100ff,
+ 0x38420001,
+ 0x58620000,
+ 0x5c200005,
+ 0x28610000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0x58610000,
+ 0xc3a00000,
+ 0x202100ff,
+ 0x3c210004,
+ 0x78020003,
+ 0x3842f00c,
+ 0xb8220800,
+ 0x28230000,
+ 0x78020100,
+ 0x78040400,
+ 0x78010200,
+ 0x38210000,
+ 0xa0610800,
+ 0x38420000,
+ 0x38840000,
+ 0xa0621000,
+ 0x00210019,
+ 0xa0641800,
+ 0x0063001a,
+ 0x00420018,
+ 0x64260001,
+ 0x64420001,
+ 0x7c610001,
+ 0x78040003,
+ 0x34050000,
+ 0x5c250004,
+ 0x38848de0,
+ 0x30830018,
+ 0xe0000003,
+ 0x38848de0,
+ 0x30850018,
+ 0xa0c20800,
+ 0x34030000,
+ 0xe4230800,
+ 0x34020001,
+ 0x78040003,
+ 0x5c230004,
+ 0x38848de0,
+ 0x30830017,
+ 0xc3a00000,
+ 0x38848de0,
+ 0x30820017,
+ 0xc3a00000,
+ 0x379cff8c,
+ 0x5b8b003c,
+ 0x5b8c0038,
+ 0x5b8d0034,
+ 0x5b8e0030,
+ 0x5b8f002c,
+ 0x5b900028,
+ 0x5b910024,
+ 0x5b920020,
+ 0x5b93001c,
+ 0x5b940018,
+ 0x5b950014,
+ 0x5b960010,
+ 0x5b97000c,
+ 0x5b9b0008,
+ 0x5b9d0004,
+ 0x78100003,
+ 0xba000800,
+ 0x38218de0,
+ 0x40210001,
+ 0x5b81004c,
+ 0x2b82004c,
+ 0x78010003,
+ 0x3821f004,
+ 0x3c5b0004,
+ 0xbb610800,
+ 0x28230000,
+ 0x78020003,
+ 0x5b820040,
+ 0xb8400800,
+ 0x3821f008,
+ 0xbb610800,
+ 0x28350000,
+ 0x78020003,
+ 0x3842f00c,
+ 0x78010100,
+ 0xbb621000,
+ 0x38210000,
+ 0x284b0000,
+ 0xa2a10800,
+ 0x00210018,
+ 0x22a200ff,
+ 0x7c210001,
+ 0x5b820070,
+ 0x5b830074,
+ 0x5c200014,
+ 0x20630003,
+ 0x34010002,
+ 0xf0230800,
+ 0x78020003,
+ 0xc8010800,
+ 0xa0611800,
+ 0x3c630002,
+ 0x3842f324,
+ 0xb4621000,
+ 0x28410000,
+ 0x22a22000,
+ 0x5b810074,
+ 0x44400007,
+ 0x78010003,
+ 0x3821f330,
+ 0xb4610800,
+ 0x28210000,
+ 0x2021ffff,
+ 0x5b810070,
+ 0x78010400,
+ 0x38210000,
+ 0xa1610800,
+ 0x0021001a,
+ 0x7c210001,
+ 0x5c200010,
+ 0x78010003,
+ 0x3821f30c,
+ 0x28220000,
+ 0x37830058,
+ 0x78010fff,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x3c420002,
+ 0x34010000,
+ 0x5b82006c,
+ 0x5b810068,
+ 0x37810070,
+ 0x37820068,
+ 0xfbfffd54,
+ 0xe0000005,
+ 0x2b810074,
+ 0x2b820070,
+ 0x5b81005c,
+ 0x5b820058,
+ 0x78010200,
+ 0x38210000,
+ 0xa1610800,
+ 0x00210019,
+ 0x78020003,
+ 0x64370001,
+ 0x38420000,
+ 0xa1621000,
+ 0x22a10f00,
+ 0x00330008,
+ 0x7806000c,
+ 0x00420010,
+ 0xba003800,
+ 0x38c60000,
+ 0xa1663000,
+ 0x38e78de0,
+ 0x204200ff,
+ 0x34010000,
+ 0x78030800,
+ 0x78050030,
+ 0x00cd0010,
+ 0x5b820048,
+ 0x38630000,
+ 0x40e80019,
+ 0x780400c0,
+ 0x38a50000,
+ 0x5b810060,
+ 0xa1631800,
+ 0xa1652800,
+ 0x2b810048,
+ 0x38840000,
+ 0xa1642000,
+ 0x0063001b,
+ 0x40e60002,
+ 0x00a50014,
+ 0x00840016,
+ 0x65120000,
+ 0x66f40000,
+ 0x21a200fc,
+ 0xb8416800,
+ 0x20a500ff,
+ 0x64760001,
+ 0x5b860064,
+ 0x208b00ff,
+ 0x5b850044,
+ 0xba608800,
+ 0xba540800,
+ 0x5c200003,
+ 0x7ec10000,
+ 0x4420000d,
+ 0x78030003,
+ 0x3863f30c,
+ 0x28620000,
+ 0x78011fff,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x58620000,
+ 0x2b82005c,
+ 0x2b810058,
+ 0x5b820054,
+ 0x5b810050,
+ 0xe000002d,
+ 0x75a1000c,
+ 0x5c200027,
+ 0x78010003,
+ 0x3da20002,
+ 0x38218640,
+ 0xb4411000,
+ 0x28410000,
+ 0x78030003,
+ 0x78041fff,
+ 0xc0200000,
+ 0x2b810064,
+ 0x3863f30c,
+ 0x7802c000,
+ 0x3c210002,
+ 0x3884ffff,
+ 0x5b810064,
+ 0x28610000,
+ 0x38420000,
+ 0xe0000009,
+ 0x2b810064,
+ 0x3863f30c,
+ 0x78026000,
+ 0x3c210005,
+ 0x3884ffff,
+ 0x5b810064,
+ 0x28610000,
+ 0x38420000,
+ 0xa0240800,
+ 0xb8220800,
+ 0x58610000,
+ 0xe000000a,
+ 0xb8600800,
+ 0x3821f30c,
+ 0x28220000,
+ 0x3884ffff,
+ 0x34030000,
+ 0xa0441000,
+ 0x58220000,
+ 0x5b830060,
+ 0x5b830064,
+ 0x37810058,
+ 0x37820060,
+ 0x37830050,
+ 0xfbfffce5,
+ 0x65610003,
+ 0x7eee0000,
+ 0x2b820054,
+ 0xa02e0800,
+ 0x64210000,
+ 0x204c001f,
+ 0x5c200003,
+ 0x340b0000,
+ 0xe0000008,
+ 0x7d610003,
+ 0x5c200006,
+ 0x2b81004c,
+ 0xb9801000,
+ 0xfbfffcb7,
+ 0xb8207800,
+ 0xe0000006,
+ 0x3d620002,
+ 0x78010003,
+ 0x3821f324,
+ 0xb4411000,
+ 0x284f0000,
+ 0x22a11000,
+ 0x7c350000,
+ 0x75a1000c,
+ 0x5c200101,
+ 0x3da10002,
+ 0x78020003,
+ 0x38428674,
+ 0xb4220800,
+ 0x28210000,
+ 0xc0200000,
+ 0x2b810054,
+ 0x3402fffc,
+ 0x7803c200,
+ 0xa0220800,
+ 0x38630000,
+ 0xb8230800,
+ 0xb9e01000,
+ 0xfbffe609,
+ 0xe0000018,
+ 0x2b810054,
+ 0x78028008,
+ 0x38420000,
+ 0x00210002,
+ 0x78040003,
+ 0x3c210002,
+ 0x78030003,
+ 0xb4220800,
+ 0x582f0000,
+ 0x3a108de0,
+ 0x34010001,
+ 0x38845250,
+ 0x38638e28,
+ 0x3201000f,
+ 0xe0000087,
+ 0x78020003,
+ 0x3842f340,
+ 0x2b810054,
+ 0xba601800,
+ 0x202101ff,
+ 0xb4220800,
+ 0xb9e01000,
+ 0xfbfffeaf,
+ 0x78030003,
+ 0x78020003,
+ 0x38635250,
+ 0xe0000010,
+ 0x78020003,
+ 0x3842f540,
+ 0xe3fffff4,
+ 0x2b820054,
+ 0x2b850048,
+ 0x2b810050,
+ 0xba601800,
+ 0x34040000,
+ 0xfbfffd39,
+ 0xb8201000,
+ 0xb9e00800,
+ 0xfbfffd66,
+ 0x78030003,
+ 0x78020003,
+ 0x38634fc8,
+ 0x3a108de0,
+ 0x38428e28,
+ 0x34010001,
+ 0x3201000f,
+ 0x58430000,
+ 0xe00000c2,
+ 0x66c10000,
+ 0xa1c10800,
+ 0x64210000,
+ 0x5c200016,
+ 0x5e400015,
+ 0xba406800,
+ 0xba401000,
+ 0x34410001,
+ 0xb9b16800,
+ 0x202200ff,
+ 0x3e310004,
+ 0x74410007,
+ 0x4420fffb,
+ 0x2b830054,
+ 0x2b8c0064,
+ 0x780b8002,
+ 0x2063001f,
+ 0x396b8058,
+ 0x340e0040,
+ 0xb5831800,
+ 0xb9600800,
+ 0xb9c01000,
+ 0xfbfffc9e,
+ 0xb8207800,
+ 0xe000002d,
+ 0x65610003,
+ 0xa2810800,
+ 0x64210000,
+ 0x5c20001b,
+ 0x2b820040,
+ 0x340e0008,
+ 0x3842f008,
+ 0xbb620800,
+ 0x28210000,
+ 0x780200ff,
+ 0x38420000,
+ 0xa0220800,
+ 0x00210010,
+ 0xba601000,
+ 0x202100ff,
+ 0xfbfffc7c,
+ 0xb8206800,
+ 0x2b81004c,
+ 0xb9801800,
+ 0x340c0000,
+ 0x34220001,
+ 0x3c420004,
+ 0x78010003,
+ 0x3821f000,
+ 0xb8415800,
+ 0xb9600800,
+ 0xb9c01000,
+ 0xfbfffc80,
+ 0xb8207800,
+ 0xe000000f,
+ 0xbe6c6800,
+ 0x3401001c,
+ 0x502c0004,
+ 0xc80c0800,
+ 0x82610800,
+ 0xb9a16800,
+ 0x21820003,
+ 0x3d630002,
+ 0x78010003,
+ 0x3821f324,
+ 0xc8021000,
+ 0xb4615800,
+ 0x204c0003,
+ 0x340e0001,
+ 0x2b810050,
+ 0x2b820054,
+ 0x34030001,
+ 0xfbfffd66,
+ 0x4420000b,
+ 0xba000800,
+ 0x38218de0,
+ 0x28220028,
+ 0x2821002c,
+ 0x5b810050,
+ 0x2b810054,
+ 0x20210fff,
+ 0xb4411000,
+ 0x34421000,
+ 0x5b820054,
+ 0x2b810050,
+ 0x2b820054,
+ 0xbaa02000,
+ 0xb9a01800,
+ 0xfbfffc77,
+ 0xb9600800,
+ 0xb9c01000,
+ 0xb9801800,
+ 0xfbfffca7,
+ 0x78020003,
+ 0x78040003,
+ 0x78030003,
+ 0x38428de0,
+ 0x34010001,
+ 0x38845314,
+ 0x38638e28,
+ 0x3041000f,
+ 0x58640000,
+ 0xe000005b,
+ 0x78010003,
+ 0x3821f000,
+ 0xbb610800,
+ 0x28220000,
+ 0x34060000,
+ 0x7801001f,
+ 0x3821ffff,
+ 0xa0413800,
+ 0x5e86001a,
+ 0x2b850054,
+ 0xe6c60800,
+ 0x78038008,
+ 0x78020003,
+ 0x78040003,
+ 0x5c260008,
+ 0x38630000,
+ 0x38420198,
+ 0x3401fffc,
+ 0xb4621000,
+ 0xa0a10800,
+ 0x58410000,
+ 0xe0000005,
+ 0x38630000,
+ 0x38420198,
+ 0xb4620800,
+ 0x58250000,
+ 0x2b810050,
+ 0x78028008,
+ 0x38420000,
+ 0x3884019c,
+ 0xb4441000,
+ 0x2021ffff,
+ 0x58410000,
+ 0xe000001b,
+ 0x78038008,
+ 0x78020003,
+ 0x38630000,
+ 0x38420190,
+ 0x78010003,
+ 0xb4621000,
+ 0x38210194,
+ 0x584f0000,
+ 0xb4610800,
+ 0x58370000,
+ 0x2b810054,
+ 0x78020003,
+ 0x3404fffc,
+ 0x38420198,
+ 0xa0240800,
+ 0xb4621000,
+ 0x58410000,
+ 0x78010003,
+ 0x3821019c,
+ 0xb4611800,
+ 0x2b810050,
+ 0x78064000,
+ 0xa0e43800,
+ 0x2021ffff,
+ 0x58610000,
+ 0x38c60000,
+ 0x3ea10018,
+ 0x78058008,
+ 0x78020003,
+ 0x38a50000,
+ 0x3842018c,
+ 0xb8c13000,
+ 0xb4a21000,
+ 0xa1d61800,
+ 0x58460000,
+ 0x64630000,
+ 0x78060003,
+ 0x78020003,
+ 0x78040003,
+ 0x5c600008,
+ 0x78012000,
+ 0x384203a0,
+ 0x38210000,
+ 0xb4a21000,
+ 0xb8e10800,
+ 0x58410000,
+ 0xe0000004,
+ 0x384203a0,
+ 0xb4a20800,
+ 0x58270000,
+ 0x38845530,
+ 0x3a108de0,
+ 0x38c68e28,
+ 0x34010001,
+ 0x3201000f,
+ 0x58c40000,
+ 0x2b810044,
+ 0xb9e01000,
+ 0xba601800,
+ 0xfbfffd66,
+ 0x2b81004c,
+ 0xfbfffdf5,
+ 0x78010003,
+ 0x38218eac,
+ 0xfbfff87f,
+ 0x2b8b003c,
+ 0x2b8c0038,
+ 0x2b8d0034,
+ 0x2b8e0030,
+ 0x2b8f002c,
+ 0x2b900028,
+ 0x2b910024,
+ 0x2b920020,
+ 0x2b93001c,
+ 0x2b940018,
+ 0x2b950014,
+ 0x2b960010,
+ 0x2b97000c,
+ 0x2b9b0008,
+ 0x2b9d0004,
+ 0x379c0074,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x00240008,
+ 0xb8206000,
+ 0x78060003,
+ 0x780100ff,
+ 0x38c68ddc,
+ 0x3821ffff,
+ 0x28c50000,
+ 0x3c840018,
+ 0xa0e13800,
+ 0x7801ffff,
+ 0xb8e43800,
+ 0x38210000,
+ 0xa0e13800,
+ 0x34a50001,
+ 0x20a5ffff,
+ 0x780100ff,
+ 0xb8e53800,
+ 0x38210000,
+ 0xb8e13800,
+ 0x780b8002,
+ 0x58c50000,
+ 0x396b8000,
+ 0x340100ff,
+ 0x59610050,
+ 0x00420008,
+ 0x3d8c0018,
+ 0x59670044,
+ 0x206300ff,
+ 0x34010000,
+ 0xb9826000,
+ 0xb8603800,
+ 0xb8201000,
+ 0xb8201800,
+ 0x34040037,
+ 0xb8202800,
+ 0xb8203000,
+ 0xfbfffa2b,
+ 0x596c004c,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cffc4,
+ 0x5b8b0024,
+ 0x5b8c0020,
+ 0x5b8d001c,
+ 0x5b8e0018,
+ 0x5b8f0014,
+ 0x5b900010,
+ 0x5b91000c,
+ 0x5b920008,
+ 0x5b9d0004,
+ 0x78110003,
+ 0xba200800,
+ 0x38218de0,
+ 0x40320001,
+ 0x78020003,
+ 0x3842f008,
+ 0x3e430004,
+ 0x78010003,
+ 0x3821f004,
+ 0xb8610800,
+ 0x28240000,
+ 0xb8621000,
+ 0x284c0000,
+ 0x78010100,
+ 0x38210000,
+ 0x78020003,
+ 0x3842f00c,
+ 0xb8621800,
+ 0xa1810800,
+ 0x286b0000,
+ 0x00210018,
+ 0x218200ff,
+ 0x7c210001,
+ 0x5b820038,
+ 0x5b84003c,
+ 0x5c200014,
+ 0x20830003,
+ 0x34010002,
+ 0xf0230800,
+ 0x78020003,
+ 0xc8010800,
+ 0xa0611800,
+ 0x3c630002,
+ 0x3842f324,
+ 0xb4621000,
+ 0x28410000,
+ 0x21822000,
+ 0x5b81003c,
+ 0x44400007,
+ 0x78010003,
+ 0x3821f330,
+ 0xb4610800,
+ 0x28210000,
+ 0x2021ffff,
+ 0x5b810038,
+ 0x78010400,
+ 0x38210000,
+ 0xa1610800,
+ 0x0021001a,
+ 0x7c210001,
+ 0x5c200010,
+ 0x78010003,
+ 0x3821f304,
+ 0x28220000,
+ 0x37830028,
+ 0x78010fff,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x3c420002,
+ 0x34010000,
+ 0x5b820034,
+ 0x5b810030,
+ 0x37810038,
+ 0x37820030,
+ 0xfbfffb38,
+ 0xe0000005,
+ 0x2b81003c,
+ 0x2b830038,
+ 0x5b81002c,
+ 0x5b830028,
+ 0x78020200,
+ 0x7803000c,
+ 0x38420000,
+ 0x38630000,
+ 0xa1621000,
+ 0x00420019,
+ 0xa1631800,
+ 0x00630012,
+ 0x78010003,
+ 0x644f0001,
+ 0x38210000,
+ 0x206300ff,
+ 0xa1610800,
+ 0x00210010,
+ 0x7c620002,
+ 0x78040030,
+ 0x38840000,
+ 0x202600ff,
+ 0xa1642000,
+ 0x3c630002,
+ 0x00840014,
+ 0x21851000,
+ 0xa1e21000,
+ 0x21810f00,
+ 0xb8661800,
+ 0x002e0008,
+ 0x7cb00000,
+ 0x64420000,
+ 0x206300ff,
+ 0x208d00ff,
+ 0x5c400004,
+ 0x3a318de0,
+ 0x34010000,
+ 0x32210019,
+ 0x7461000c,
+ 0x5c20007e,
+ 0x3c610002,
+ 0x78020003,
+ 0x384286a8,
+ 0xb4220800,
+ 0x28210000,
+ 0x780b0003,
+ 0x780c0003,
+ 0xc0200000,
+ 0x2b81002c,
+ 0x3402fffc,
+ 0x7803c200,
+ 0xa0220800,
+ 0x38630000,
+ 0xb8230800,
+ 0xfbffe465,
+ 0xe0000019,
+ 0x2b82002c,
+ 0x78048008,
+ 0x38840000,
+ 0x00420002,
+ 0xb9a00800,
+ 0x3c420002,
+ 0xb9c01800,
+ 0xb4441000,
+ 0x28420000,
+ 0x396b8de0,
+ 0x398c8e28,
+ 0xfbfffc91,
+ 0x78010003,
+ 0x382159c8,
+ 0x34020001,
+ 0x3162000f,
+ 0x59810000,
+ 0xe000005c,
+ 0x78020003,
+ 0x3842f340,
+ 0x2b81002c,
+ 0x202101ff,
+ 0xb4220800,
+ 0xfbfffcdf,
+ 0xb8201000,
+ 0xb9a00800,
+ 0xb9c01800,
+ 0xfbfffc81,
+ 0x78020003,
+ 0x384259c8,
+ 0xe000000d,
+ 0x78020003,
+ 0x3842f540,
+ 0xe3fffff3,
+ 0x2b82002c,
+ 0x2b810028,
+ 0xb9c01800,
+ 0xb8c02800,
+ 0x34040001,
+ 0xfbfffb77,
+ 0xfbfffcf9,
+ 0x78020003,
+ 0x38425074,
+ 0x396b8de0,
+ 0x398c8e28,
+ 0x34010001,
+ 0x3161000f,
+ 0x59820000,
+ 0xe000003d,
+ 0x2b82002c,
+ 0x2b810028,
+ 0x396b8de0,
+ 0x31620000,
+ 0x34030000,
+ 0xfbfffbea,
+ 0x44200008,
+ 0x2961002c,
+ 0x29620028,
+ 0x5b810028,
+ 0x2b81002c,
+ 0x20210fff,
+ 0xb4411000,
+ 0x5b82002c,
+ 0x2b810028,
+ 0x2b82002c,
+ 0xba001800,
+ 0xfbffff0b,
+ 0x78010003,
+ 0x78020003,
+ 0x382157e4,
+ 0x38428e28,
+ 0x34040001,
+ 0x65e30000,
+ 0x58410000,
+ 0x3164000f,
+ 0x5c600022,
+ 0x31640019,
+ 0xe0000020,
+ 0x65e10000,
+ 0x5c20000e,
+ 0x2b83002c,
+ 0x78028008,
+ 0x78010003,
+ 0x38420000,
+ 0x38210190,
+ 0xb4410800,
+ 0x58230000,
+ 0x78010003,
+ 0x38210194,
+ 0xb4411000,
+ 0x2b810028,
+ 0x2021ffff,
+ 0x58410000,
+ 0x78028008,
+ 0x78010003,
+ 0x3821018c,
+ 0x38420000,
+ 0x3e06000c,
+ 0xb4411000,
+ 0x78050003,
+ 0x78030003,
+ 0x78040003,
+ 0x58460000,
+ 0x38a55484,
+ 0x38638de0,
+ 0x38848e28,
+ 0x34010001,
+ 0x3061000f,
+ 0x58850000,
+ 0xba400800,
+ 0xfbfffcbf,
+ 0x78010003,
+ 0x38218eac,
+ 0xfbfff749,
+ 0x2b8b0024,
+ 0x2b8c0020,
+ 0x2b8d001c,
+ 0x2b8e0018,
+ 0x2b8f0014,
+ 0x2b900010,
+ 0x2b91000c,
+ 0x2b920008,
+ 0x2b9d0004,
+ 0x379c003c,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x284b0000,
+ 0xb8403800,
+ 0x202100ff,
+ 0x3c210004,
+ 0x78020003,
+ 0x3842f000,
+ 0xb8220800,
+ 0x282c0000,
+ 0x7804f000,
+ 0x38840000,
+ 0xa1840800,
+ 0x0021001c,
+ 0x28e30000,
+ 0x78060fff,
+ 0x34020001,
+ 0x38c6ffff,
+ 0xbc411000,
+ 0xa1665800,
+ 0xb5625800,
+ 0xa0641800,
+ 0xa1662000,
+ 0xb8641800,
+ 0x3d610002,
+ 0x0162000e,
+ 0x58e30000,
+ 0x780500d0,
+ 0xa1866000,
+ 0x2021fffc,
+ 0x2042ffff,
+ 0x38a50000,
+ 0x34030000,
+ 0x34040002,
+ 0xfbfff9a5,
+ 0xf16c0800,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780b0003,
+ 0x396b8de0,
+ 0x41630018,
+ 0x78020003,
+ 0x3842f304,
+ 0x202100ff,
+ 0x4460000a,
+ 0xfbffffcb,
+ 0x78020003,
+ 0x3842f320,
+ 0x34030000,
+ 0x44230004,
+ 0x28410000,
+ 0x38210004,
+ 0x58410000,
+ 0x31630018,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780b0003,
+ 0x396b8de0,
+ 0x41630018,
+ 0x78020003,
+ 0x3842f30c,
+ 0x202100ff,
+ 0x4460000a,
+ 0xfbffffb4,
+ 0x78020003,
+ 0x3842f320,
+ 0x34030000,
+ 0x44230004,
+ 0x28410000,
+ 0x38210008,
+ 0x58410000,
+ 0x31630018,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780b0003,
+ 0x396b8de0,
+ 0x41630013,
+ 0x34010000,
+ 0x34020002,
+ 0x44610004,
+ 0xfbfff940,
+ 0x34010000,
+ 0x31610013,
+ 0x41630014,
+ 0x34010000,
+ 0x34020002,
+ 0x44610004,
+ 0xfbfff950,
+ 0x34010000,
+ 0x31610014,
+ 0x41610017,
+ 0x78050003,
+ 0x78040003,
+ 0x38a56938,
+ 0x34060001,
+ 0x388440b4,
+ 0x78020003,
+ 0x44200005,
+ 0x38428e28,
+ 0x3166000f,
+ 0x58450000,
+ 0xe0000004,
+ 0x38428e28,
+ 0x3166000f,
+ 0x58440000,
+ 0x78010003,
+ 0x38218eac,
+ 0xfbfff6c0,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78020003,
+ 0x3842f30c,
+ 0x28430000,
+ 0x78040003,
+ 0x38848de0,
+ 0x7802e000,
+ 0x38420000,
+ 0xa0621800,
+ 0x0063001d,
+ 0x40820002,
+ 0x34060001,
+ 0xbcc31800,
+ 0xb4461000,
+ 0x34050000,
+ 0x204200ff,
+ 0x202100ff,
+ 0x206300ff,
+ 0x54620005,
+ 0x30850002,
+ 0x30860017,
+ 0xfbffffaa,
+ 0xe0000002,
+ 0x30820002,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780b0003,
+ 0x396b8de0,
+ 0x41610001,
+ 0xfbffffde,
+ 0x41630013,
+ 0x34010000,
+ 0x34020002,
+ 0x44610004,
+ 0xfbfff8f9,
+ 0x34010000,
+ 0x31610013,
+ 0x41630014,
+ 0x34010000,
+ 0x34020002,
+ 0x44610004,
+ 0xfbfff909,
+ 0x34010000,
+ 0x31610014,
+ 0x41610017,
+ 0x78050003,
+ 0x78040003,
+ 0x38a56938,
+ 0x34060001,
+ 0x388440b4,
+ 0x78020003,
+ 0x44200005,
+ 0x38428e28,
+ 0x3166000f,
+ 0x58450000,
+ 0xe0000004,
+ 0x38428e28,
+ 0x3166000f,
+ 0x58440000,
+ 0x78010003,
+ 0x38218eac,
+ 0xfbfff679,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cffe4,
+ 0x5b8b001c,
+ 0x5b8c0018,
+ 0x5b8d0014,
+ 0x5b8e0010,
+ 0x5b8f000c,
+ 0x5b900008,
+ 0x5b9d0004,
+ 0x780f0003,
+ 0xb9e00800,
+ 0x3821f334,
+ 0x28220000,
+ 0x78100003,
+ 0x340c0000,
+ 0x78017f00,
+ 0x38210000,
+ 0xa0411000,
+ 0xba000800,
+ 0x38218de0,
+ 0x004d0018,
+ 0x402e0001,
+ 0x65ab0000,
+ 0xb9c00800,
+ 0xfbffff4b,
+ 0xe58d1800,
+ 0x3d840010,
+ 0x65620000,
+ 0x7801007f,
+ 0x38210000,
+ 0xa0431000,
+ 0xa0812000,
+ 0x7806c210,
+ 0xb9e03800,
+ 0x7805ff80,
+ 0x64420000,
+ 0x7d610000,
+ 0x38e7f334,
+ 0x38c60008,
+ 0x38a5ffff,
+ 0x358c0001,
+ 0x5c200005,
+ 0x28e10000,
+ 0xa0250800,
+ 0xb8240800,
+ 0x58e10000,
+ 0x28c10000,
+ 0x20210008,
+ 0x4420003a,
+ 0x3dc30004,
+ 0x78010003,
+ 0x3821f00c,
+ 0xb8610800,
+ 0x28210000,
+ 0x78020003,
+ 0x3842f008,
+ 0xb8621800,
+ 0x28630000,
+ 0x78020030,
+ 0x38420000,
+ 0x7804c210,
+ 0xa0220800,
+ 0x3884000c,
+ 0x28820000,
+ 0x00210014,
+ 0x20630f00,
+ 0x00630008,
+ 0x202100ff,
+ 0xfbfffb13,
+ 0x78030003,
+ 0x3863f320,
+ 0x28610000,
+ 0x3402ffef,
+ 0xba005800,
+ 0xa0220800,
+ 0x396b8de0,
+ 0x58610000,
+ 0x41610013,
+ 0x44200006,
+ 0x34010000,
+ 0x34020002,
+ 0xfbfff889,
+ 0x34010000,
+ 0x31610013,
+ 0x41610014,
+ 0x44200006,
+ 0x34010000,
+ 0x34020002,
+ 0xfbfff899,
+ 0x34010000,
+ 0x31610014,
+ 0x41610017,
+ 0x78020003,
+ 0x78030003,
+ 0x38426938,
+ 0x5c200003,
+ 0x78020003,
+ 0x384240b4,
+ 0x34010001,
+ 0x3161000f,
+ 0x38638e28,
+ 0x78010003,
+ 0x58620000,
+ 0x38218eac,
+ 0xfbfff60d,
+ 0xe0000006,
+ 0x5c40ffaf,
+ 0x340b0001,
+ 0xb9600800,
+ 0xfbfff8ae,
+ 0x5c20ffab,
+ 0x2b8b001c,
+ 0x2b8c0018,
+ 0x2b8d0014,
+ 0x2b8e0010,
+ 0x2b8f000c,
+ 0x2b900008,
+ 0x2b9d0004,
+ 0x379c001c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780b0003,
+ 0x396b8de0,
+ 0x41610001,
+ 0xfbffff3c,
+ 0x78040003,
+ 0x3884f320,
+ 0x28820000,
+ 0x3403ffef,
+ 0x34010000,
+ 0xa0431000,
+ 0x58820000,
+ 0x41630013,
+ 0x34020002,
+ 0x44610004,
+ 0xfbfff851,
+ 0x34010000,
+ 0x31610013,
+ 0x41630014,
+ 0x34010000,
+ 0x34020002,
+ 0x44610004,
+ 0xfbfff861,
+ 0x34010000,
+ 0x31610014,
+ 0x41610017,
+ 0x78050003,
+ 0x78040003,
+ 0x38a56938,
+ 0x34060001,
+ 0x388440b4,
+ 0x78020003,
+ 0x44200005,
+ 0x38428e28,
+ 0x3166000f,
+ 0x58450000,
+ 0xe0000004,
+ 0x38428e28,
+ 0x3166000f,
+ 0x58440000,
+ 0x78010003,
+ 0x38218eac,
+ 0xfbfff5d1,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b0014,
+ 0x5b8c0010,
+ 0x5b8d000c,
+ 0x5b8e0008,
+ 0x5b9d0004,
+ 0x780e0003,
+ 0xb9c00800,
+ 0x3821f334,
+ 0x28220000,
+ 0x340c0000,
+ 0x78017f00,
+ 0x38210000,
+ 0xa0411000,
+ 0x004d0018,
+ 0xe5ac5800,
+ 0xe58d1800,
+ 0x3d840010,
+ 0x65620000,
+ 0x7801007f,
+ 0x38210000,
+ 0xa0431000,
+ 0xa0812000,
+ 0x78068002,
+ 0xb9c03800,
+ 0x7805ff80,
+ 0x64420000,
+ 0x7d610000,
+ 0x38c68000,
+ 0x38e7f334,
+ 0x38a5ffff,
+ 0x358c0001,
+ 0x5c200005,
+ 0x28e10000,
+ 0xa0250800,
+ 0xb8240800,
+ 0x58e10000,
+ 0x28c10030,
+ 0x20210001,
+ 0x64210000,
+ 0x5c200028,
+ 0x780b0003,
+ 0x396b8de0,
+ 0x41610001,
+ 0xfbfffee5,
+ 0x78020003,
+ 0x3842f320,
+ 0x28410000,
+ 0x3403ffef,
+ 0xa0230800,
+ 0x58410000,
+ 0x41610013,
+ 0x44200006,
+ 0x34010000,
+ 0x34020002,
+ 0xfbfff7fa,
+ 0x34010000,
+ 0x31610013,
+ 0x41610014,
+ 0x44200006,
+ 0x34010000,
+ 0x34020002,
+ 0xfbfff80a,
+ 0x34010000,
+ 0x31610014,
+ 0x41610017,
+ 0x78020003,
+ 0x78030003,
+ 0x38426938,
+ 0x5c200003,
+ 0x78020003,
+ 0x384240b4,
+ 0x34010001,
+ 0x3161000f,
+ 0x38638e28,
+ 0x78010003,
+ 0x58620000,
+ 0x38218eac,
+ 0xfbfff57e,
+ 0xe0000006,
+ 0x5c40ffc0,
+ 0x340b0001,
+ 0xb9600800,
+ 0xfbfff81f,
+ 0x5c20ffbc,
+ 0x2b8b0014,
+ 0x2b8c0010,
+ 0x2b8d000c,
+ 0x2b8e0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780b0003,
+ 0x396b8de0,
+ 0x41610001,
+ 0xfbfffe58,
+ 0x41630013,
+ 0x34010000,
+ 0x34020002,
+ 0x44610004,
+ 0xfbfff7ca,
+ 0x34010000,
+ 0x31610013,
+ 0x41630014,
+ 0x34010000,
+ 0x34020002,
+ 0x44610004,
+ 0xfbfff7da,
+ 0x34010000,
+ 0x31610014,
+ 0x41610017,
+ 0x78050003,
+ 0x78040003,
+ 0x38a56938,
+ 0x34060001,
+ 0x388440b4,
+ 0x78020003,
+ 0x44200005,
+ 0x38428e28,
+ 0x3166000f,
+ 0x58450000,
+ 0xe0000004,
+ 0x38428e28,
+ 0x3166000f,
+ 0x58440000,
+ 0x78010003,
+ 0x38218eac,
+ 0xfbfff54a,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cffe0,
+ 0x5b8b0020,
+ 0x5b8c001c,
+ 0x5b8d0018,
+ 0x5b8e0014,
+ 0x5b8f0010,
+ 0x5b90000c,
+ 0x5b910008,
+ 0x5b9d0004,
+ 0x780e0003,
+ 0xb9c00800,
+ 0x38218de0,
+ 0x40210001,
+ 0x78100003,
+ 0x340d0000,
+ 0xfbfffe7b,
+ 0xba000800,
+ 0x3821f334,
+ 0x28220000,
+ 0xb9c08800,
+ 0x78017f00,
+ 0x38210000,
+ 0xa0411000,
+ 0x004f0018,
+ 0xe5ed6000,
+ 0x3da20010,
+ 0x7803007f,
+ 0x38630000,
+ 0xa0433000,
+ 0x78053ffe,
+ 0xba004000,
+ 0x781d0003,
+ 0x7804ff80,
+ 0x7803c001,
+ 0xb8a03800,
+ 0x7d820000,
+ 0x3908f334,
+ 0x3bbdf740,
+ 0x3884ffff,
+ 0x34010002,
+ 0x3863c001,
+ 0x38e73ffe,
+ 0x5c400005,
+ 0x29020000,
+ 0xa0441000,
+ 0xb8461000,
+ 0x59020000,
+ 0x2bab0000,
+ 0x5d630049,
+ 0x78048008,
+ 0x78090003,
+ 0x38840000,
+ 0x38a53ffe,
+ 0x3929018c,
+ 0x780a4000,
+ 0x78080003,
+ 0x5ba50000,
+ 0xb4894800,
+ 0x394a0000,
+ 0x39080190,
+ 0x78070003,
+ 0x592a0000,
+ 0xb4884000,
+ 0x38e70194,
+ 0x78060003,
+ 0x591d0000,
+ 0x340c0000,
+ 0xb4873800,
+ 0x38c60198,
+ 0x78030003,
+ 0x58ec0000,
+ 0xb4863000,
+ 0x34010230,
+ 0x3863019c,
+ 0x78020003,
+ 0x58c10000,
+ 0xb4831800,
+ 0x384203a0,
+ 0x78054800,
+ 0x586c0000,
+ 0xb4822000,
+ 0x38a50004,
+ 0x58850000,
+ 0x592a0000,
+ 0x590b0000,
+ 0x58ec0000,
+ 0x34010234,
+ 0x58c10000,
+ 0x586c0000,
+ 0x78030003,
+ 0x58850000,
+ 0x3863f320,
+ 0x28610000,
+ 0x3402ffef,
+ 0xba205800,
+ 0xa0220800,
+ 0x58610000,
+ 0x396b8de0,
+ 0x41610013,
+ 0x442c0005,
+ 0xb9800800,
+ 0x34020002,
+ 0xfbfff744,
+ 0x316c0013,
+ 0x41610014,
+ 0x44200005,
+ 0xb9800800,
+ 0x34020002,
+ 0xfbfff755,
+ 0x316c0014,
+ 0x41610017,
+ 0x78020003,
+ 0x78030003,
+ 0x38426938,
+ 0x5c200003,
+ 0x78020003,
+ 0x384240b4,
+ 0x34010001,
+ 0x38638e28,
+ 0x3161000f,
+ 0xe000001c,
+ 0x45670020,
+ 0xfbfff771,
+ 0xb8205800,
+ 0x5c20001d,
+ 0xb9c06000,
+ 0x398c8de0,
+ 0x41820013,
+ 0x44400004,
+ 0x34020002,
+ 0xfbfff728,
+ 0x318b0013,
+ 0x41810014,
+ 0x44200005,
+ 0xb9600800,
+ 0x34020002,
+ 0xfbfff739,
+ 0x318b0014,
+ 0x41810017,
+ 0x78020003,
+ 0x78030003,
+ 0x38426938,
+ 0x5c200003,
+ 0x78020003,
+ 0x384240b4,
+ 0x34010001,
+ 0x38638e28,
+ 0x3181000f,
+ 0x78010003,
+ 0x58620000,
+ 0x38218eac,
+ 0xfbfff4ae,
+ 0xe000000b,
+ 0xe5af1000,
+ 0x65810000,
+ 0x35ad0001,
+ 0xa0220800,
+ 0x64210000,
+ 0x5c20ff7b,
+ 0x340c0001,
+ 0xb9800800,
+ 0xfbfff74a,
+ 0x5c20ff77,
+ 0x2b8b0020,
+ 0x2b8c001c,
+ 0x2b8d0018,
+ 0x2b8e0014,
+ 0x2b8f0010,
+ 0x2b90000c,
+ 0x2b910008,
+ 0x2b9d0004,
+ 0x379c0020,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x780f0003,
+ 0xb9e00800,
+ 0x38218de0,
+ 0x40210001,
+ 0x780e0003,
+ 0x340c0000,
+ 0xfbfffd79,
+ 0xb9c00800,
+ 0x3821f334,
+ 0x28220000,
+ 0x78017f00,
+ 0x38210000,
+ 0xa0411000,
+ 0x004d0018,
+ 0xe5ac5800,
+ 0xe58d1800,
+ 0x3d840010,
+ 0x65620000,
+ 0x7801007f,
+ 0x38210000,
+ 0xa0431000,
+ 0xa0812000,
+ 0x78068002,
+ 0xb9c03800,
+ 0x7805ff80,
+ 0x64420000,
+ 0x7d610000,
+ 0x38c68000,
+ 0x38e7f334,
+ 0x38a5ffff,
+ 0x358c0001,
+ 0x5c200005,
+ 0x28e10000,
+ 0xa0250800,
+ 0xb8240800,
+ 0x58e10000,
+ 0x28c10050,
+ 0x202100ff,
+ 0x7c2100ff,
+ 0x5c20003e,
+ 0xb9e05800,
+ 0x396b8de0,
+ 0x41630000,
+ 0x78018002,
+ 0x34020040,
+ 0x38218058,
+ 0xfbfff7cf,
+ 0x41640001,
+ 0xb8201000,
+ 0x78010003,
+ 0x3c840004,
+ 0x3821f00c,
+ 0xb8810800,
+ 0x28210000,
+ 0x78030003,
+ 0x3863f008,
+ 0xb8832000,
+ 0x28830000,
+ 0x78040030,
+ 0x38840000,
+ 0xa0240800,
+ 0x00210014,
+ 0x20630f00,
+ 0x00630008,
+ 0x202100ff,
+ 0xfbfff932,
+ 0x78020003,
+ 0x3842f320,
+ 0x28410000,
+ 0x3403ffef,
+ 0xa0230800,
+ 0x58410000,
+ 0x41610013,
+ 0x44200006,
+ 0x34010000,
+ 0x34020002,
+ 0xfbfff6aa,
+ 0x34010000,
+ 0x31610013,
+ 0x41610014,
+ 0x44200006,
+ 0x34010000,
+ 0x34020002,
+ 0xfbfff6ba,
+ 0x34010000,
+ 0x31610014,
+ 0x41610017,
+ 0x78020003,
+ 0x78030003,
+ 0x38426938,
+ 0x5c200003,
+ 0x78020003,
+ 0x384240b4,
+ 0x34010001,
+ 0x3161000f,
+ 0x38638e28,
+ 0x78010003,
+ 0x58620000,
+ 0x38218eac,
+ 0xfbfff42e,
+ 0xe0000006,
+ 0x5c40ffaa,
+ 0x340b0001,
+ 0xb9600800,
+ 0xfbfff6cf,
+ 0x5c20ffa6,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x780b0003,
+ 0x396b8de0,
+ 0x41610001,
+ 0xfbfffd07,
+ 0x78040003,
+ 0x3884f320,
+ 0x28820000,
+ 0x3403ffef,
+ 0x34010000,
+ 0xa0431000,
+ 0x58820000,
+ 0x41630013,
+ 0x34020002,
+ 0x44610004,
+ 0xfbfff673,
+ 0x34010000,
+ 0x31610013,
+ 0x41630014,
+ 0x34010000,
+ 0x34020002,
+ 0x44610004,
+ 0xfbfff683,
+ 0x34010000,
+ 0x31610014,
+ 0x41610017,
+ 0x78050003,
+ 0x78040003,
+ 0x38a56938,
+ 0x34060001,
+ 0x388440b4,
+ 0x78020003,
+ 0x44200005,
+ 0x38428e28,
+ 0x3166000f,
+ 0x58450000,
+ 0xe0000004,
+ 0x38428e28,
+ 0x3166000f,
+ 0x58440000,
+ 0x78010003,
+ 0x38218eac,
+ 0xfbfff3f3,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x202400ff,
+ 0x34070000,
+ 0x7481000f,
+ 0xb8403000,
+ 0xb8602800,
+ 0xb8e04000,
+ 0xb8e05000,
+ 0x5c270055,
+ 0x3c810002,
+ 0x78020003,
+ 0x384286dc,
+ 0xb4220800,
+ 0x28210000,
+ 0xc0200000,
+ 0xb8c03800,
+ 0xe000005b,
+ 0xa0c33800,
+ 0xe000004a,
+ 0xa0c30800,
+ 0xe0000006,
+ 0xb8c33800,
+ 0xe0000046,
+ 0x98c33800,
+ 0xe0000044,
+ 0xb8c30800,
+ 0xa4203800,
+ 0xe0000040,
+ 0x206500ff,
+ 0x34a2ffff,
+ 0xbcc21000,
+ 0x78018000,
+ 0x38210000,
+ 0xa0411000,
+ 0x0042001f,
+ 0xbcc53800,
+ 0x204800ff,
+ 0xe0000037,
+ 0x206500ff,
+ 0x34a1ffff,
+ 0x80c10800,
+ 0x80c53800,
+ 0x20280001,
+ 0xe0000031,
+ 0x206500ff,
+ 0xc8051000,
+ 0x80c21000,
+ 0xbcc53800,
+ 0xe0000005,
+ 0x206500ff,
+ 0xc8051000,
+ 0xbcc21000,
+ 0x80c53800,
+ 0x78018000,
+ 0xb8e23800,
+ 0x38210000,
+ 0xa0e10800,
+ 0x0021001f,
+ 0x202800ff,
+ 0xe0000021,
+ 0x0063001c,
+ 0x00c2001c,
+ 0x78010fff,
+ 0xb4431000,
+ 0x3821ffff,
+ 0xa0a11800,
+ 0x7c44000f,
+ 0x7449000f,
+ 0xa0c10800,
+ 0xb4230800,
+ 0xb4c53800,
+ 0x34020000,
+ 0x5c820005,
+ 0x0023001c,
+ 0x7c610001,
+ 0x5c220002,
+ 0xb8601000,
+ 0xb9220800,
+ 0x4420000e,
+ 0xe000000c,
+ 0x8cc30800,
+ 0x34020001,
+ 0xc4c33800,
+ 0x50410009,
+ 0xb8404000,
+ 0xe0000007,
+ 0xc8c33800,
+ 0x50c30005,
+ 0xe0000003,
+ 0xc8663800,
+ 0x50660002,
+ 0x34080001,
+ 0x5ce00002,
+ 0x340a0001,
+ 0x78030003,
+ 0x3863f320,
+ 0x28610000,
+ 0x3402fffe,
+ 0x3d040001,
+ 0xa0220800,
+ 0xb82a0800,
+ 0x58610000,
+ 0x28610000,
+ 0x3402fffd,
+ 0xa0220800,
+ 0xb8240800,
+ 0x58610000,
+ 0xb8e00800,
+ 0xc3a00000,
+ 0x379cffe0,
+ 0x5b8b0020,
+ 0x5b8c001c,
+ 0x5b8d0018,
+ 0x5b8e0014,
+ 0x5b8f0010,
+ 0x5b90000c,
+ 0x5b910008,
+ 0x5b9d0004,
+ 0x780e0003,
+ 0xb9c00800,
+ 0x38218de0,
+ 0x40240001,
+ 0x78030003,
+ 0x3863f000,
+ 0x3c840004,
+ 0x78010003,
+ 0x3821f00c,
+ 0xb8810800,
+ 0x28290000,
+ 0xb8831800,
+ 0x78020003,
+ 0x28250000,
+ 0x38420000,
+ 0x0126000d,
+ 0x286a0000,
+ 0x78010003,
+ 0x3821f004,
+ 0xb8810800,
+ 0x282c0000,
+ 0xa0a22800,
+ 0x00a50010,
+ 0x78010003,
+ 0x3821f008,
+ 0xb8812000,
+ 0x288b0000,
+ 0x0122000c,
+ 0x20a500ff,
+ 0x00a80001,
+ 0x20420001,
+ 0x01210004,
+ 0x01230008,
+ 0x0124000f,
+ 0x0127000e,
+ 0x7c420001,
+ 0x202f000f,
+ 0x2070000f,
+ 0x21080001,
+ 0x20840001,
+ 0x20c60001,
+ 0x20e70001,
+ 0x213d000f,
+ 0x20b10001,
+ 0x5c400012,
+ 0x214a0003,
+ 0x7d410003,
+ 0x7c820001,
+ 0xc8010800,
+ 0xa1415000,
+ 0x3d430002,
+ 0x5c400007,
+ 0x78010003,
+ 0x3821f330,
+ 0xb4610800,
+ 0x28210000,
+ 0x202affff,
+ 0xe0000005,
+ 0x78010003,
+ 0x3821f324,
+ 0xb4610800,
+ 0x282a0000,
+ 0x7cc10001,
+ 0x5c200012,
+ 0x218c0003,
+ 0x7d810003,
+ 0x7c820001,
+ 0xc8010800,
+ 0xa1816000,
+ 0x3d830002,
+ 0x5c400007,
+ 0x78010003,
+ 0x3821f330,
+ 0xb4610800,
+ 0x28210000,
+ 0x202cffff,
+ 0xe0000005,
+ 0x78010003,
+ 0x3821f324,
+ 0xb4610800,
+ 0x282c0000,
+ 0x7ce10001,
+ 0x5c200012,
+ 0x216b0003,
+ 0x7d610003,
+ 0x7c820001,
+ 0xc8010800,
+ 0xa1615800,
+ 0x3d630002,
+ 0x5c400007,
+ 0x78010003,
+ 0x3821f330,
+ 0xb4610800,
+ 0x28210000,
+ 0x202bffff,
+ 0xe0000005,
+ 0x78010003,
+ 0x3821f324,
+ 0xb4610800,
+ 0x282b0000,
+ 0x780100c0,
+ 0x38210000,
+ 0xa1210800,
+ 0x78020030,
+ 0x00210016,
+ 0x38420000,
+ 0xa1221000,
+ 0x202300ff,
+ 0x00420014,
+ 0x7c610003,
+ 0x204d00ff,
+ 0x5c200006,
+ 0x78010003,
+ 0x3821f320,
+ 0x28210000,
+ 0x202200ff,
+ 0xe000000e,
+ 0x65010000,
+ 0x3c620002,
+ 0x5c200007,
+ 0x78010003,
+ 0x3821f330,
+ 0xb4410800,
+ 0x28210000,
+ 0x2022ffff,
+ 0xe0000005,
+ 0x78010003,
+ 0x3821f324,
+ 0xb4410800,
+ 0x28220000,
+ 0xb9401800,
+ 0xbba00800,
+ 0xfbffff07,
+ 0xb8201000,
+ 0xb9801800,
+ 0xb9e00800,
+ 0xfbffff03,
+ 0xb8201000,
+ 0xba000800,
+ 0xb9601800,
+ 0xfbfffeff,
+ 0xb8201000,
+ 0x7da10003,
+ 0x5c20000a,
+ 0x78030003,
+ 0x3863f320,
+ 0x28610000,
+ 0x204400ff,
+ 0x3402ff00,
+ 0xa0220800,
+ 0xb8240800,
+ 0x58610000,
+ 0xe0000009,
+ 0x66210000,
+ 0x5c200004,
+ 0xb9a00800,
+ 0xfbfff7fb,
+ 0xe0000004,
+ 0xb9a00800,
+ 0x3403000f,
+ 0xfbfff7bb,
+ 0x78020003,
+ 0x78030003,
+ 0x38426938,
+ 0x38638e28,
+ 0x34040001,
+ 0x39ce8de0,
+ 0x78010003,
+ 0x31c4000f,
+ 0x58620000,
+ 0x38218eac,
+ 0xfbfff2ce,
+ 0x2b8b0020,
+ 0x2b8c001c,
+ 0x2b8d0018,
+ 0x2b8e0014,
+ 0x2b8f0010,
+ 0x2b90000c,
+ 0x2b910008,
+ 0x2b9d0004,
+ 0x379c0020,
+ 0xc3a00000,
+ 0x379cffd4,
+ 0x5b8b002c,
+ 0x5b8c0028,
+ 0x5b8d0024,
+ 0x5b8e0020,
+ 0x5b8f001c,
+ 0x5b900018,
+ 0x5b910014,
+ 0x5b920010,
+ 0x5b93000c,
+ 0x5b940008,
+ 0x5b9d0004,
+ 0x78110003,
+ 0xba208000,
+ 0x3a108de0,
+ 0x42130001,
+ 0x78010003,
+ 0x3821f008,
+ 0x3e6f0004,
+ 0x78140003,
+ 0xb9e10800,
+ 0x28230000,
+ 0xba806800,
+ 0x39adf320,
+ 0x29a10000,
+ 0x006c0010,
+ 0x34020000,
+ 0x78050070,
+ 0x202b00ff,
+ 0x2072ffff,
+ 0xb9600800,
+ 0x38a50000,
+ 0xb8401800,
+ 0x34040001,
+ 0xfbfff52d,
+ 0x218effff,
+ 0x21810300,
+ 0x4420000e,
+ 0x7801c201,
+ 0x34020065,
+ 0x3821c530,
+ 0xfbffdf29,
+ 0x7801c201,
+ 0x3821c534,
+ 0xfbffdf40,
+ 0x00220008,
+ 0x00210004,
+ 0x20420100,
+ 0xb9625800,
+ 0x20210200,
+ 0xb9615800,
+ 0x21810c00,
+ 0x44200011,
+ 0x78038008,
+ 0x38630000,
+ 0x28610194,
+ 0x3402ffc0,
+ 0xa0220800,
+ 0x38210001,
+ 0x58610194,
+ 0x34010124,
+ 0x58610190,
+ 0x28620198,
+ 0x00410006,
+ 0x00420002,
+ 0x20210400,
+ 0xb9615800,
+ 0x20420800,
+ 0xb9625800,
+ 0xa24e1000,
+ 0xa16e0800,
+ 0x4422000a,
+ 0x78020003,
+ 0x78030003,
+ 0x38426938,
+ 0x38638e28,
+ 0x34040001,
+ 0x78010003,
+ 0x3204000f,
+ 0x58620000,
+ 0xe0000058,
+ 0x78010003,
+ 0x3821f004,
+ 0xb9e12000,
+ 0x288b0000,
+ 0x21634000,
+ 0x44600005,
+ 0x34020001,
+ 0x78010003,
+ 0x3202000d,
+ 0xe000004e,
+ 0x21610800,
+ 0x44200006,
+ 0x29a10000,
+ 0x34020001,
+ 0x32020010,
+ 0x38210040,
+ 0x59a10000,
+ 0x21610400,
+ 0x44200006,
+ 0x29a10000,
+ 0x3402ffbf,
+ 0x32030010,
+ 0xa0220800,
+ 0x59a10000,
+ 0x21610200,
+ 0x44200015,
+ 0x28810000,
+ 0x202100ff,
+ 0x5c200003,
+ 0x3401001f,
+ 0xe0000003,
+ 0x3421ffff,
+ 0x202100ff,
+ 0x34230034,
+ 0x3a318de0,
+ 0xba802000,
+ 0x32230001,
+ 0x3884f320,
+ 0x28820000,
+ 0x206300ff,
+ 0x7801ff00,
+ 0x3821ffff,
+ 0x3c630010,
+ 0xa0411000,
+ 0xb8431000,
+ 0x58820000,
+ 0x21610100,
+ 0x44200007,
+ 0x78020003,
+ 0x38428de0,
+ 0x34030001,
+ 0x78010003,
+ 0x3043000e,
+ 0xe0000022,
+ 0x21611000,
+ 0x4420000a,
+ 0x78010003,
+ 0x3821f000,
+ 0xb9e10800,
+ 0x28230000,
+ 0x78021fff,
+ 0x3842ffff,
+ 0x0061001d,
+ 0xa0621000,
+ 0xfbfff497,
+ 0x21612000,
+ 0x4420000b,
+ 0x3e620004,
+ 0x78010003,
+ 0x3821f000,
+ 0xb8411000,
+ 0x28430000,
+ 0x78021fff,
+ 0x3842ffff,
+ 0x0061001d,
+ 0xa0621000,
+ 0xfbfff4a2,
+ 0x78050003,
+ 0x78020003,
+ 0x78030003,
+ 0x38a56938,
+ 0x38428de0,
+ 0x38638e28,
+ 0x34040001,
+ 0x78010003,
+ 0x3044000f,
+ 0x58650000,
+ 0x38218eac,
+ 0xfbfff21a,
+ 0x2b8b002c,
+ 0x2b8c0028,
+ 0x2b8d0024,
+ 0x2b8e0020,
+ 0x2b8f001c,
+ 0x2b900018,
+ 0x2b910014,
+ 0x2b920010,
+ 0x2b93000c,
+ 0x2b940008,
+ 0x2b9d0004,
+ 0x379c002c,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78080003,
+ 0xb9000800,
+ 0x38218de0,
+ 0x40220001,
+ 0x78050003,
+ 0x78030030,
+ 0x3c470004,
+ 0x78010003,
+ 0x3821f00c,
+ 0xb8e10800,
+ 0x28240000,
+ 0x78020003,
+ 0x38420000,
+ 0x780100c0,
+ 0x38210000,
+ 0xa0821000,
+ 0xa0810800,
+ 0x00210016,
+ 0x00420010,
+ 0x38630000,
+ 0x38a5f004,
+ 0x204200ff,
+ 0xa0832000,
+ 0x202600ff,
+ 0xb8e52800,
+ 0x00410001,
+ 0x00840014,
+ 0x28a50000,
+ 0x7cc30003,
+ 0x208400ff,
+ 0x20210001,
+ 0x20420001,
+ 0x5c600005,
+ 0x78010003,
+ 0x3821f000,
+ 0xb8e10800,
+ 0xe000000d,
+ 0x64210000,
+ 0x3cc30002,
+ 0x5c200007,
+ 0x78010003,
+ 0x3821f330,
+ 0xb4610800,
+ 0x28210000,
+ 0x2023ffff,
+ 0xe0000005,
+ 0x78010003,
+ 0x3821f324,
+ 0xb4610800,
+ 0x28230000,
+ 0x7c810003,
+ 0x5c200005,
+ 0x78010003,
+ 0x3821f000,
+ 0xb8e10800,
+ 0xe000000d,
+ 0x64410000,
+ 0x3c840002,
+ 0x5c200007,
+ 0x78010003,
+ 0x3821f330,
+ 0xb4810800,
+ 0x28210000,
+ 0x2021ffff,
+ 0xe0000005,
+ 0x78010003,
+ 0x3821f324,
+ 0xb4810800,
+ 0x28210000,
+ 0xa0250800,
+ 0xa0651800,
+ 0xe4612000,
+ 0x34050000,
+ 0x50230002,
+ 0x34050001,
+ 0x78030003,
+ 0x3863f320,
+ 0x28610000,
+ 0x3402fffe,
+ 0x3ca50001,
+ 0xa0220800,
+ 0xb8240800,
+ 0x58610000,
+ 0x28610000,
+ 0x3402fffd,
+ 0x78040003,
+ 0xa0220800,
+ 0xb8250800,
+ 0x58610000,
+ 0x78020003,
+ 0x38846938,
+ 0x39088de0,
+ 0x38428e28,
+ 0x34030001,
+ 0x78010003,
+ 0x3103000f,
+ 0x58440000,
+ 0x38218eac,
+ 0xfbfff1a8,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x202100ff,
+ 0x3c210004,
+ 0x78020003,
+ 0x3842f008,
+ 0xb8221000,
+ 0x28450000,
+ 0x7804f000,
+ 0x38840000,
+ 0x78020200,
+ 0x38420000,
+ 0xa0a21000,
+ 0x78030003,
+ 0xa0a42800,
+ 0x3863f00c,
+ 0x00a5001c,
+ 0xb8233000,
+ 0x00420019,
+ 0x20a30003,
+ 0x34010002,
+ 0x78070003,
+ 0x7c420001,
+ 0xf0230800,
+ 0x38e7f324,
+ 0x5c40000a,
+ 0xc8010800,
+ 0xa0611800,
+ 0x3c610002,
+ 0xb4270800,
+ 0x28210000,
+ 0x00220004,
+ 0x2025000f,
+ 0x204bffff,
+ 0xe0000003,
+ 0x28c10000,
+ 0x202bffff,
+ 0xbd655800,
+ 0x78020003,
+ 0x34030001,
+ 0x38428de0,
+ 0x3043001a,
+ 0x584b0004,
+ 0x34010007,
+ 0xfbfff2c3,
+ 0x34010007,
+ 0xfbfff2b6,
+ 0xb9601000,
+ 0x34010007,
+ 0xfbfff2c8,
+ 0x34010001,
+ 0x3c21001c,
+ 0x78028000,
+ 0x38428000,
+ 0x58410054,
+ 0x3401003c,
+ 0xfbffac92,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x34030000,
+ 0x38218de0,
+ 0x58230004,
+ 0x3023001a,
+ 0x3401003c,
+ 0xfbffacb2,
+ 0x34010007,
+ 0xfbfff2a8,
+ 0x34010001,
+ 0x3c21001c,
+ 0x78028000,
+ 0x38428000,
+ 0x58410054,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x202200ff,
+ 0x34010001,
+ 0x78040003,
+ 0x78060003,
+ 0xbc221800,
+ 0x3884f320,
+ 0x38c68de0,
+ 0x34050000,
+ 0x3409001f,
+ 0x3408ffdf,
+ 0x34a50001,
+ 0x34410001,
+ 0x68a7001f,
+ 0x3c630001,
+ 0x202200ff,
+ 0x51220007,
+ 0x28810000,
+ 0x34020000,
+ 0x34030001,
+ 0xa0280800,
+ 0x38210020,
+ 0x58810000,
+ 0x28c10008,
+ 0xa0230800,
+ 0x44200003,
+ 0xb8400800,
+ 0xc3a00000,
+ 0x44e0ffef,
+ 0x34010020,
+ 0xc3a00000,
+ 0x379cffec,
+ 0x5b8b0014,
+ 0x5b8c0010,
+ 0x5b8d000c,
+ 0x5b8e0008,
+ 0x5b9d0004,
+ 0x780d0003,
+ 0xb9a02800,
+ 0x38a58de0,
+ 0x40a80001,
+ 0x78010003,
+ 0x3821f00c,
+ 0x3d030004,
+ 0x78027000,
+ 0xb8613000,
+ 0x28c10000,
+ 0x38420000,
+ 0xb9a03800,
+ 0xa0220800,
+ 0x0024001c,
+ 0x44800020,
+ 0x64810002,
+ 0x5c20000e,
+ 0x68810002,
+ 0x5c200004,
+ 0x64810001,
+ 0x5c200005,
+ 0xe0000013,
+ 0x64810004,
+ 0x5c20000c,
+ 0xe0000010,
+ 0x78020003,
+ 0x78010003,
+ 0x38428e28,
+ 0x38216214,
+ 0xe000000a,
+ 0x78020003,
+ 0x78010003,
+ 0x38428e28,
+ 0x38215c3c,
+ 0xe0000005,
+ 0x78020003,
+ 0x78010003,
+ 0x38428e28,
+ 0x38215f38,
+ 0x58410000,
+ 0xb8e01000,
+ 0x38428de0,
+ 0x34030001,
+ 0x78010003,
+ 0x3043000f,
+ 0xe00000b6,
+ 0x40a10010,
+ 0x44200009,
+ 0x78010003,
+ 0x3821f300,
+ 0x28220000,
+ 0x78010002,
+ 0x38210000,
+ 0xa0411000,
+ 0x00420011,
+ 0x5c40000c,
+ 0x78030003,
+ 0x30a40010,
+ 0x3863f320,
+ 0x28610000,
+ 0x3402ffbf,
+ 0x34040001,
+ 0xa0220800,
+ 0x58610000,
+ 0x30a4000f,
+ 0x30a40011,
+ 0xe00000a3,
+ 0x78010003,
+ 0x3821f008,
+ 0xb8610800,
+ 0x28240000,
+ 0x78030400,
+ 0x38630000,
+ 0x28c50000,
+ 0x78010c00,
+ 0x38210000,
+ 0x28c20000,
+ 0xa0812000,
+ 0x78010100,
+ 0x38210000,
+ 0x0084001a,
+ 0xa0431000,
+ 0xa0a12800,
+ 0x0042001a,
+ 0x00810001,
+ 0x00ae0018,
+ 0x7c420001,
+ 0x20290001,
+ 0x5c400044,
+ 0x78010003,
+ 0x78020003,
+ 0x5dc0001e,
+ 0xb8403800,
+ 0x38e7f31c,
+ 0x28e20000,
+ 0xb8202800,
+ 0x38a5f320,
+ 0x7806ff00,
+ 0x38c60000,
+ 0x28a10000,
+ 0xa0461000,
+ 0x00420018,
+ 0x20210004,
+ 0x5c200002,
+ 0x44480033,
+ 0x28a10000,
+ 0x3402fffb,
+ 0x78030003,
+ 0xa0220800,
+ 0x58a10000,
+ 0x3863f304,
+ 0x28620000,
+ 0x7801f000,
+ 0x38210000,
+ 0xa0411000,
+ 0x58620000,
+ 0x28e30000,
+ 0x780100ff,
+ 0x3d020018,
+ 0x3821ffff,
+ 0xe000001e,
+ 0xb8403800,
+ 0x38e7f31c,
+ 0x28e20000,
+ 0xb8202800,
+ 0x780600ff,
+ 0x38c60000,
+ 0x38a5f320,
+ 0xa0461000,
+ 0x28a10000,
+ 0x00420010,
+ 0x20210008,
+ 0x204200ff,
+ 0x5c200002,
+ 0x44480015,
+ 0x28a10000,
+ 0x3402fff7,
+ 0x78030003,
+ 0xa0220800,
+ 0x58a10000,
+ 0x3863f30c,
+ 0x28620000,
+ 0x7801f000,
+ 0x38210000,
+ 0xa0411000,
+ 0x58620000,
+ 0x28e30000,
+ 0x7801ff00,
+ 0x3d020010,
+ 0x3821ffff,
+ 0xa0611800,
+ 0xa0461000,
+ 0xb8621800,
+ 0x58e30000,
+ 0xe0000002,
+ 0x20890001,
+ 0xb9a01800,
+ 0x34020000,
+ 0x38638de0,
+ 0x7d210001,
+ 0x30620017,
+ 0xb8406000,
+ 0x5c22000e,
+ 0x90005800,
+ 0xd0020000,
+ 0xb9000800,
+ 0xfbfffee5,
+ 0xb9a00800,
+ 0x38218de0,
+ 0x34030000,
+ 0x34020001,
+ 0x30230014,
+ 0x30220016,
+ 0x30230013,
+ 0xd00b0000,
+ 0xe000001e,
+ 0x3062001a,
+ 0x58620004,
+ 0x3401003c,
+ 0xfbffabd0,
+ 0x34010007,
+ 0xfbfff1c6,
+ 0x34010001,
+ 0x3c21001c,
+ 0x78028000,
+ 0x38428000,
+ 0x58410054,
+ 0x90005800,
+ 0xd00c0000,
+ 0xb9a01000,
+ 0x38428de0,
+ 0x40430012,
+ 0x44600006,
+ 0x34010000,
+ 0x30410015,
+ 0x30410012,
+ 0x340c0001,
+ 0xe0000004,
+ 0x34010001,
+ 0x30410015,
+ 0xb8606000,
+ 0xd00b0000,
+ 0x34010000,
+ 0x39ad8de0,
+ 0x31a10012,
+ 0x78040003,
+ 0xb8801000,
+ 0x38428de0,
+ 0x34010000,
+ 0x30410011,
+ 0x7dc30001,
+ 0x65850000,
+ 0x78020003,
+ 0x5c610005,
+ 0x78010003,
+ 0x38428e28,
+ 0x382140b4,
+ 0xe0000004,
+ 0x78010003,
+ 0x38428e28,
+ 0x3821494c,
+ 0x58410000,
+ 0x5ca00007,
+ 0x38848de0,
+ 0x34020001,
+ 0x78010003,
+ 0x3082000f,
+ 0x38218eac,
+ 0xfbfff04b,
+ 0x2b8b0014,
+ 0x2b8c0010,
+ 0x2b8d000c,
+ 0x2b8e0008,
+ 0x2b9d0004,
+ 0x379c0014,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x780b0003,
+ 0x396b8de0,
+ 0x416c0001,
+ 0x3581ffcc,
+ 0x202100ff,
+ 0xfbfffee7,
+ 0x78060003,
+ 0x38c6f320,
+ 0x34210034,
+ 0x202c00ff,
+ 0x28c40000,
+ 0x3d830010,
+ 0x7802ff00,
+ 0x780100ff,
+ 0x3842ffff,
+ 0x38210000,
+ 0xa0611800,
+ 0xa0822000,
+ 0xb8832000,
+ 0x34020000,
+ 0x58c40000,
+ 0x78050010,
+ 0x38a50000,
+ 0xb9800800,
+ 0xb8401800,
+ 0x34040001,
+ 0xfbfff2b1,
+ 0x316c0001,
+ 0xfbfffeee,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cffcc,
+ 0x5b8b0034,
+ 0x5b8c0030,
+ 0x5b8d002c,
+ 0x5b8e0028,
+ 0x5b8f0024,
+ 0x5b900020,
+ 0x5b91001c,
+ 0x5b920018,
+ 0x5b930014,
+ 0x5b940010,
+ 0x5b95000c,
+ 0x5b960008,
+ 0x5b970004,
+ 0x340a0000,
+ 0x202100ff,
+ 0x78140003,
+ 0x78138000,
+ 0x78127000,
+ 0x78110200,
+ 0x78100100,
+ 0x780f00c0,
+ 0x780e000c,
+ 0x780d0003,
+ 0xe42ab800,
+ 0xb9406000,
+ 0x205600ff,
+ 0x3a94f34c,
+ 0x3a730000,
+ 0x3a520000,
+ 0x3a310000,
+ 0x3a100000,
+ 0x39ef0000,
+ 0x39ce0000,
+ 0x39adf348,
+ 0x34070001,
+ 0xb9404000,
+ 0x3d050004,
+ 0x34150000,
+ 0xb4b41800,
+ 0x28660000,
+ 0xb4ad2800,
+ 0x28610000,
+ 0xa0d33000,
+ 0x00c6001f,
+ 0x28620000,
+ 0xa0320800,
+ 0x002b001c,
+ 0xa0511000,
+ 0x28610000,
+ 0x00420019,
+ 0x20c600ff,
+ 0x28640000,
+ 0xa0300800,
+ 0x00210018,
+ 0x28630000,
+ 0x64290001,
+ 0x7c420001,
+ 0x28a10000,
+ 0xa08f2000,
+ 0xa06e1800,
+ 0x20210f00,
+ 0x00840016,
+ 0x00630012,
+ 0xa1221000,
+ 0x00250008,
+ 0xe4551000,
+ 0x208100ff,
+ 0x206300ff,
+ 0x5c550007,
+ 0x64210003,
+ 0xe5751000,
+ 0xa0220800,
+ 0xe4350800,
+ 0x5c350002,
+ 0x34150001,
+ 0x7ec10000,
+ 0x34040000,
+ 0xa1210800,
+ 0xe4240800,
+ 0x5c240007,
+ 0xe4a41000,
+ 0x64610002,
+ 0xa0220800,
+ 0xe4240800,
+ 0x5c240002,
+ 0x34040001,
+ 0x64610002,
+ 0x7cc20001,
+ 0xa2e11800,
+ 0x5c400013,
+ 0x66a10000,
+ 0x5c200008,
+ 0x35080002,
+ 0x3401001f,
+ 0x4c280002,
+ 0xe000000e,
+ 0xb9475000,
+ 0x3ce70003,
+ 0xe000000b,
+ 0x64810000,
+ 0x5c200002,
+ 0x398c0002,
+ 0x64610000,
+ 0x5c200004,
+ 0x3ce70001,
+ 0x398c0001,
+ 0xe0000003,
+ 0xb9475000,
+ 0x3ce70001,
+ 0x35080001,
+ 0x6901001f,
+ 0x4420ffb5,
+ 0x78010003,
+ 0x38218de0,
+ 0x78020003,
+ 0x582a0008,
+ 0x3842f318,
+ 0x28410000,
+ 0xb9800800,
+ 0x584a0000,
+ 0x2b8b0034,
+ 0x2b8c0030,
+ 0x2b8d002c,
+ 0x2b8e0028,
+ 0x2b8f0024,
+ 0x2b900020,
+ 0x2b91001c,
+ 0x2b920018,
+ 0x2b930014,
+ 0x2b940010,
+ 0x2b95000c,
+ 0x2b960008,
+ 0x2b970004,
+ 0x379c0034,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0x90006800,
+ 0x34010000,
+ 0xd0010000,
+ 0x78010003,
+ 0x3821f300,
+ 0x28250000,
+ 0x78040002,
+ 0x78020004,
+ 0x28270000,
+ 0x38840000,
+ 0x38420000,
+ 0x28260000,
+ 0xa0e43800,
+ 0x78030001,
+ 0xa0c23000,
+ 0x38630000,
+ 0x00c60012,
+ 0x00e70011,
+ 0xa0a32800,
+ 0x34080001,
+ 0x20cb00ff,
+ 0x00a50010,
+ 0x20e700ff,
+ 0x78030003,
+ 0x78010003,
+ 0xfd686000,
+ 0xfce83000,
+ 0x38638de0,
+ 0x38218eac,
+ 0x20a500ff,
+ 0x78040003,
+ 0x78020003,
+ 0x5ca00003,
+ 0x3068000d,
+ 0xe000001b,
+ 0xb8802800,
+ 0x78010003,
+ 0x38a5f320,
+ 0x34030000,
+ 0x38218eac,
+ 0x5cc30008,
+ 0x38428de0,
+ 0x30470010,
+ 0x28a20000,
+ 0x38420040,
+ 0x58a20000,
+ 0xfbffef62,
+ 0xe0000007,
+ 0x38428de0,
+ 0x30430010,
+ 0x28a10000,
+ 0x3402ffbf,
+ 0xa0220800,
+ 0x58a10000,
+ 0x78020003,
+ 0x78010003,
+ 0x38428de0,
+ 0x5d800005,
+ 0x304b001b,
+ 0x304b000e,
+ 0x38218eac,
+ 0xfbffef53,
+ 0xd00d0000,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cffe8,
+ 0x5b8b0018,
+ 0x5b8c0014,
+ 0x5b8d0010,
+ 0x5b8e000c,
+ 0x5b8f0008,
+ 0x5b9d0004,
+ 0x3401003c,
+ 0xfbffaa97,
+ 0x34010007,
+ 0xfbfff08d,
+ 0x340d0001,
+ 0x3da1001c,
+ 0x780b8000,
+ 0x396b8000,
+ 0x780c0003,
+ 0x59610054,
+ 0x340e0000,
+ 0x398c8de0,
+ 0x3401001a,
+ 0x598e0004,
+ 0x318e001a,
+ 0xfbffaa89,
+ 0x3da2001a,
+ 0x34010019,
+ 0x59620050,
+ 0xfbffaa85,
+ 0x3da10019,
+ 0x78040003,
+ 0x59610050,
+ 0x3884f334,
+ 0x28820000,
+ 0x7801ff80,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x78030003,
+ 0x58820000,
+ 0x3863f330,
+ 0x28610000,
+ 0x780bc210,
+ 0x780f0003,
+ 0x2021ffff,
+ 0x58610000,
+ 0x396b0008,
+ 0xb9e00800,
+ 0x596e0000,
+ 0x3821f300,
+ 0x28210000,
+ 0x20210004,
+ 0xfc2e0800,
+ 0xe42e1000,
+ 0x3181000c,
+ 0x5c4e003a,
+ 0x7802fe00,
+ 0xb9a02000,
+ 0x38420810,
+ 0x3403000f,
+ 0xb9a02800,
+ 0x340100fd,
+ 0xfbfff2f4,
+ 0xb9c00800,
+ 0xfbfff475,
+ 0x7804c210,
+ 0xb9601000,
+ 0x3884000c,
+ 0x28410000,
+ 0x20210008,
+ 0x4420fffe,
+ 0x28840000,
+ 0x3401fff0,
+ 0xa0812000,
+ 0x78050003,
+ 0x78080003,
+ 0x3908f33c,
+ 0x29020000,
+ 0x7801ffff,
+ 0x38210000,
+ 0xa0411000,
+ 0x00420010,
+ 0x38a58de0,
+ 0x78010003,
+ 0x58a20030,
+ 0x3821f314,
+ 0x28270000,
+ 0x78068008,
+ 0x38c60000,
+ 0x28c1153c,
+ 0x3c43000c,
+ 0xb4872000,
+ 0xc8230800,
+ 0x3c21000c,
+ 0x3ce70009,
+ 0xb4812000,
+ 0x58a40020,
+ 0x29010000,
+ 0x34030001,
+ 0x202100ff,
+ 0xb4411000,
+ 0x3442ffff,
+ 0x58a20034,
+ 0x28c1155c,
+ 0x3c21000c,
+ 0xb4270800,
+ 0x58a10028,
+ 0x28c1155c,
+ 0x00210014,
+ 0x30a3001d,
+ 0x58a1002c,
+ 0x30a3001c,
+ 0xe0000003,
+ 0x3181001d,
+ 0x3181001c,
+ 0x7802fe00,
+ 0x3403000f,
+ 0x34040000,
+ 0x34050001,
+ 0x38420094,
+ 0x340100fd,
+ 0xfbfff2b9,
+ 0x34010007,
+ 0x34020000,
+ 0xfbfff2e6,
+ 0x34040001,
+ 0x7802fe00,
+ 0x38420098,
+ 0x3403000f,
+ 0xb8802800,
+ 0x340100fd,
+ 0xfbfff2af,
+ 0x34010000,
+ 0xfbfff430,
+ 0x7803c210,
+ 0x7802c210,
+ 0x38630008,
+ 0x3842000c,
+ 0x28610000,
+ 0x20210008,
+ 0x4420fffe,
+ 0x28420000,
+ 0x0042000f,
+ 0x78018000,
+ 0x382100a4,
+ 0x28210000,
+ 0x20420001,
+ 0x780d0003,
+ 0x20210001,
+ 0xfbfffe9c,
+ 0xb9e01800,
+ 0x3863f300,
+ 0x28620000,
+ 0xb8205800,
+ 0x7801ffff,
+ 0x38217fff,
+ 0xa0411000,
+ 0x58620000,
+ 0x28610000,
+ 0x3402bfff,
+ 0xb9a02000,
+ 0xa0220800,
+ 0x58610000,
+ 0x3884f320,
+ 0x28810000,
+ 0x3402ff80,
+ 0x21630002,
+ 0xa0220800,
+ 0x58810000,
+ 0x44600005,
+ 0x34010003,
+ 0xfbfff149,
+ 0xb8201000,
+ 0x44200055,
+ 0x21610001,
+ 0x64210000,
+ 0x5c200005,
+ 0x34010004,
+ 0xfbfff142,
+ 0xb8201000,
+ 0x4420004e,
+ 0x34010020,
+ 0xfbfffd45,
+ 0xb8206000,
+ 0x7c210020,
+ 0x5c200005,
+ 0x34010005,
+ 0xfbfff139,
+ 0xb8201000,
+ 0x44200045,
+ 0x78020003,
+ 0x7801c001,
+ 0x3842f740,
+ 0x3821c001,
+ 0x358c0034,
+ 0x780e0003,
+ 0x39ce8de0,
+ 0x58410000,
+ 0x218300ff,
+ 0xb9a02000,
+ 0x31c30001,
+ 0x3884f320,
+ 0x28820000,
+ 0x7801ff00,
+ 0x3821ffff,
+ 0x3c630010,
+ 0xa0411000,
+ 0xb8431000,
+ 0x78030003,
+ 0x58820000,
+ 0x38638acc,
+ 0x28620048,
+ 0x7801fffe,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x38420001,
+ 0x7801c201,
+ 0x58620048,
+ 0x3821c50c,
+ 0xfbffdb02,
+ 0x3401001a,
+ 0xfbffa998,
+ 0x340d0001,
+ 0x3da1001a,
+ 0x780b8000,
+ 0x396b8000,
+ 0x59610050,
+ 0x34010019,
+ 0xfbffa991,
+ 0x3da10019,
+ 0x34040000,
+ 0x59610050,
+ 0x78030003,
+ 0x31cc0001,
+ 0x31c4000f,
+ 0x31c40012,
+ 0x31c40013,
+ 0x31c40014,
+ 0x31c40015,
+ 0x31c40016,
+ 0x31c40017,
+ 0x31c40018,
+ 0x31c40019,
+ 0x3863f31c,
+ 0x28610000,
+ 0x2021ffff,
+ 0x58610000,
+ 0x41c1001b,
+ 0x44240008,
+ 0xb9e01800,
+ 0x3863f300,
+ 0x28620000,
+ 0x7801fffb,
+ 0x3821ffff,
+ 0xa0411000,
+ 0x58620000,
+ 0x31c4001b,
+ 0xb9a01000,
+ 0xb8400800,
+ 0x2b8b0018,
+ 0x2b8c0014,
+ 0x2b8d0010,
+ 0x2b8e000c,
+ 0x2b8f0008,
+ 0x2b9d0004,
+ 0x379c0018,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x5b8b000c,
+ 0x5b8c0008,
+ 0x5b9d0004,
+ 0x3401003c,
+ 0xfbffa992,
+ 0x340c0001,
+ 0x3d81001c,
+ 0x780b8000,
+ 0x396b8000,
+ 0x59610054,
+ 0x34010007,
+ 0xfbffef83,
+ 0x3401001a,
+ 0xfbffa989,
+ 0x3d82001a,
+ 0x34010019,
+ 0x59620050,
+ 0xfbffa985,
+ 0x3d810019,
+ 0x7803c210,
+ 0x59610050,
+ 0x34020000,
+ 0x38630008,
+ 0x78010003,
+ 0x58620000,
+ 0x38218de0,
+ 0x78050003,
+ 0x302c0011,
+ 0x3022000c,
+ 0x3022000f,
+ 0x3022001b,
+ 0x30220010,
+ 0x38a5f320,
+ 0x28a30000,
+ 0x3404ffbf,
+ 0xa0641800,
+ 0x58a30000,
+ 0x3022000d,
+ 0x30220012,
+ 0x30220013,
+ 0x30220014,
+ 0x30220015,
+ 0x30220016,
+ 0x30220017,
+ 0x30220018,
+ 0x30220019,
+ 0x3022000e,
+ 0x3022001a,
+ 0x58220004,
+ 0x2b8b000c,
+ 0x2b8c0008,
+ 0x2b9d0004,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0x78010003,
+ 0x34020000,
+ 0x38218eac,
+ 0xfbffee3d,
+ 0x90002000,
+ 0x34010000,
+ 0xd0010000,
+ 0x780b0003,
+ 0xb9601000,
+ 0x38428de0,
+ 0x4043000d,
+ 0x3041000d,
+ 0xd0040000,
+ 0x44600003,
+ 0xfbffffb8,
+ 0xe3fffff1,
+ 0x90002000,
+ 0xd0030000,
+ 0xb9601000,
+ 0x38428de0,
+ 0x4043000e,
+ 0x34010000,
+ 0x3041000e,
+ 0xd0040000,
+ 0x4460000f,
+ 0xfbfffea5,
+ 0x78030003,
+ 0x78020003,
+ 0x396b8de0,
+ 0x38638e28,
+ 0x38426570,
+ 0x34040001,
+ 0x4420ffe0,
+ 0x78010003,
+ 0x58620000,
+ 0x3164000f,
+ 0x38218eac,
+ 0xfbffede4,
+ 0xe3ffffda,
+ 0x90002000,
+ 0xd0030000,
+ 0xb9600800,
+ 0x38218de0,
+ 0x4023000f,
+ 0x34020000,
+ 0x3022000f,
+ 0xd0040000,
+ 0x78010003,
+ 0x38218e28,
+ 0x396b8de0,
+ 0x4462ffce,
+ 0x28210000,
+ 0x3162000f,
+ 0xd8200000,
+ 0xe3ffffca,
+ 0x78050003,
+ 0x78020003,
+ 0xb8a00800,
+ 0x3842f4ff,
+ 0x3821f300,
+ 0x34070000,
+ 0x58270000,
+ 0x34210001,
+ 0x54220002,
+ 0xe3fffffd,
+ 0x78048008,
+ 0x78020003,
+ 0x38840000,
+ 0x3842ffff,
+ 0x78030003,
+ 0x7801c001,
+ 0x5882202c,
+ 0x3863f740,
+ 0x3821c001,
+ 0x58610000,
+ 0x38a5f300,
+ 0x28a10000,
+ 0x3402f00f,
+ 0x3404cfff,
+ 0xa0220800,
+ 0x38210090,
+ 0x58a10000,
+ 0x28a20000,
+ 0x78010003,
+ 0x38218de0,
+ 0x38420008,
+ 0x58a20000,
+ 0x28a20000,
+ 0x34030000,
+ 0x34060001,
+ 0xa0441000,
+ 0x38421000,
+ 0x58a20000,
+ 0x3027000d,
+ 0x30260011,
+ 0x3023001a,
+ 0x3027000c,
+ 0x3023000e,
+ 0x3023000f,
+ 0x3023001b,
+ 0x30230010,
+ 0x30230012,
+ 0x30230013,
+ 0x30230014,
+ 0x30230015,
+ 0x30230016,
+ 0x30230017,
+ 0x30230018,
+ 0x30230019,
+ 0x58270004,
+ 0xc3a00000,
+ 0x7801c210,
+ 0x38210008,
+ 0x28220000,
+ 0x38420001,
+ 0x58220000,
+ 0x28210000,
+ 0xc3a00000,
+ 0x7802c210,
+ 0x38420008,
+ 0x28410000,
+ 0x00210004,
+ 0x20210001,
+ 0x7c210001,
+ 0x4420fffc,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x20230004,
+ 0x00210003,
+ 0x64630000,
+ 0x3c210003,
+ 0x20c60007,
+ 0xb8c13000,
+ 0x3401fffb,
+ 0xc8031800,
+ 0xa0c13000,
+ 0x2063001f,
+ 0x3401ff00,
+ 0x3463fff0,
+ 0x7804ffff,
+ 0xa0e13800,
+ 0x388400ff,
+ 0x206300ff,
+ 0x3c630008,
+ 0x3401fffd,
+ 0xa0e43800,
+ 0x7805c210,
+ 0xa0c13000,
+ 0x38a50014,
+ 0x7804c210,
+ 0x58a60000,
+ 0xb8e33800,
+ 0x38840018,
+ 0x7801c210,
+ 0x58870000,
+ 0x3821001c,
+ 0x58220000,
+ 0xfbffffd1,
+ 0xfbffffd7,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x20220004,
+ 0x00210003,
+ 0x64420000,
+ 0x3c210003,
+ 0x20a50007,
+ 0xb8a12800,
+ 0xc8021000,
+ 0x3401ff00,
+ 0x2042001f,
+ 0xa0c13000,
+ 0x3442fff0,
+ 0x3401fffd,
+ 0x204200ff,
+ 0x7804ffff,
+ 0x38a50004,
+ 0xa0a12800,
+ 0x3c420008,
+ 0x388400ff,
+ 0x7803c210,
+ 0xa0c43000,
+ 0x38630014,
+ 0x7801c210,
+ 0x58650000,
+ 0xb8c23000,
+ 0x38210018,
+ 0x58260000,
+ 0xfbffffb0,
+ 0xfbffffb6,
+ 0x7801c210,
+ 0x3821000c,
+ 0x28210000,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfff8,
+ 0x5b8b0008,
+ 0x5b9d0004,
+ 0xb8205800,
+ 0x00210003,
+ 0x20a50007,
+ 0x3c210003,
+ 0x21620007,
+ 0xb8a12800,
+ 0x34030001,
+ 0xbc621800,
+ 0x3401ff00,
+ 0xa0c13000,
+ 0x3401fffd,
+ 0x206300ff,
+ 0x7804ffff,
+ 0x38a50004,
+ 0xa0a12800,
+ 0x3c630008,
+ 0x388400ff,
+ 0x7802c210,
+ 0xa0c43000,
+ 0x38420014,
+ 0x7801c210,
+ 0x58450000,
+ 0xb8c33000,
+ 0x38210018,
+ 0x58260000,
+ 0xfbffff8c,
+ 0xfbffff92,
+ 0x7801c210,
+ 0x3821000c,
+ 0x28210000,
+ 0x216b0003,
+ 0x3d6b0003,
+ 0x802b0800,
+ 0x202100ff,
+ 0x2b8b0008,
+ 0x2b9d0004,
+ 0x379c0008,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x20430004,
+ 0x00420003,
+ 0x64630000,
+ 0x3c420003,
+ 0x20a50007,
+ 0xb8a22800,
+ 0x3402ff00,
+ 0xc8031800,
+ 0xa0c23000,
+ 0x202100ff,
+ 0x2063001f,
+ 0xb8c13000,
+ 0x3463fff0,
+ 0x3401fffd,
+ 0x206300ff,
+ 0x7804ffff,
+ 0x38a50004,
+ 0xa0a12800,
+ 0x3c630008,
+ 0x388400ff,
+ 0x7802c210,
+ 0xa0c43000,
+ 0x38420014,
+ 0x7801c210,
+ 0x58450000,
+ 0xb8c33000,
+ 0x38210018,
+ 0x58260000,
+ 0xfbffff61,
+ 0xfbffff67,
+ 0x7801c210,
+ 0x3821000c,
+ 0x28210000,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x379cfffc,
+ 0x5b9d0004,
+ 0x20440004,
+ 0x00420003,
+ 0x64840000,
+ 0x3c420003,
+ 0x20c60007,
+ 0xb8c23000,
+ 0x3402ff00,
+ 0xc8042000,
+ 0xa0e23800,
+ 0x202100ff,
+ 0x2084001f,
+ 0x3402fffb,
+ 0xb8e13800,
+ 0x3484fff0,
+ 0xa0c23000,
+ 0x208400ff,
+ 0x7805ffff,
+ 0x7801c210,
+ 0x3c840008,
+ 0x38a500ff,
+ 0x38c60002,
+ 0x38210014,
+ 0x58260000,
+ 0xa0e53800,
+ 0x7802c210,
+ 0xb8e43800,
+ 0x38420018,
+ 0x7801c210,
+ 0x58470000,
+ 0x3821001c,
+ 0x58230000,
+ 0xfbffff38,
+ 0xfbffff3e,
+ 0x2b9d0004,
+ 0x379c0004,
+ 0xc3a00000,
+ 0x7801c210,
+ 0x38210008,
+ 0x34020000,
+ 0x58220000,
+ 0xc3a00000,
+ 0x7803c210,
+ 0x38630008,
+ 0x28620000,
+ 0x38420002,
+ 0x00410007,
+ 0x58620000,
+ 0x20210001,
+ 0x5c200004,
+ 0x28620000,
+ 0x00410007,
+ 0xe3fffffc,
+ 0xc3a00000,
+ 0x7803c210,
+ 0x38630008,
+ 0x28620000,
+ 0x3401fffd,
+ 0xa0411000,
+ 0x00410007,
+ 0x58620000,
+ 0x20210001,
+ 0x7c210001,
+ 0x5c200004,
+ 0x28620000,
+ 0x00410007,
+ 0xe3fffffb,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x3c42000b,
+ 0x3c210010,
+ 0x3c630008,
+ 0xb8220800,
+ 0x20870004,
+ 0xb8230800,
+ 0x34e70008,
+ 0x208400f8,
+ 0x7802fe00,
+ 0x38420002,
+ 0xb8240800,
+ 0xbcc73000,
+ 0xb8220800,
+ 0x5b810010,
+ 0x38c600fd,
+ 0x5b86000c,
+ 0x5b850008,
+ 0x2b820010,
+ 0x7801c210,
+ 0x38210014,
+ 0x58220000,
+ 0x2b82000c,
+ 0x7801c210,
+ 0x38210018,
+ 0x58220000,
+ 0x2b830008,
+ 0x7801c210,
+ 0x3821001c,
+ 0x7802c210,
+ 0x58230000,
+ 0x38420008,
+ 0x28410000,
+ 0xb8401800,
+ 0x5b810004,
+ 0x43810007,
+ 0x38210001,
+ 0x33810007,
+ 0x2b810004,
+ 0x58410000,
+ 0x28610000,
+ 0x5b810004,
+ 0x43810007,
+ 0x00210004,
+ 0x20210001,
+ 0x7c210001,
+ 0x4420fffa,
+ 0x43810007,
+ 0x3402fffe,
+ 0xa0220800,
+ 0x33810007,
+ 0x2b810004,
+ 0x58610000,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x379cfff4,
+ 0x3c42000b,
+ 0x3c210010,
+ 0x3c630008,
+ 0xb8220800,
+ 0x20860004,
+ 0xb8230800,
+ 0x208400f8,
+ 0x34c60008,
+ 0x7802fe00,
+ 0xb8240800,
+ 0x38420004,
+ 0xbca62800,
+ 0xb8220800,
+ 0x5b81000c,
+ 0x38a500fd,
+ 0x5b850008,
+ 0x2b82000c,
+ 0x7801c210,
+ 0x38210014,
+ 0x58220000,
+ 0x2b830008,
+ 0x7801c210,
+ 0x38210018,
+ 0x7802c210,
+ 0x58230000,
+ 0x38420008,
+ 0x28410000,
+ 0xb8402000,
+ 0x5b810004,
+ 0x43810007,
+ 0x38210001,
+ 0x33810007,
+ 0x2b810004,
+ 0x58410000,
+ 0x28810000,
+ 0x5b810004,
+ 0x43810007,
+ 0x00210003,
+ 0x20210001,
+ 0x4420fffb,
+ 0x43810007,
+ 0x3402fffe,
+ 0x7803c210,
+ 0xa0220800,
+ 0x33810007,
+ 0x2b810004,
+ 0x3863000c,
+ 0x58810000,
+ 0x28610000,
+ 0x379c000c,
+ 0xc3a00000,
+ 0x379cfff0,
+ 0x5b8b0010,
+ 0x5b8c000c,
+ 0x5b8d0008,
+ 0x5b9d0004,
+ 0xb8205800,
+ 0xb8406000,
+ 0x340d0000,
+ 0x5c4d000a,
+ 0x90000800,
+ 0x34020001,
+ 0x20210001,
+ 0xf8000031,
+ 0xd0010000,
+ 0x90e00800,
+ 0x342100a0,
+ 0xbba0f000,
+ 0xc0200000,
+ 0xb96c0800,
+ 0x7421000f,
+ 0x5c200010,
+ 0xb9600800,
+ 0x34020004,
+ 0x780b0003,
+ 0xf8000025,
+ 0x396b871c,
+ 0xb42b0800,
+ 0xb42c0800,
+ 0x40220000,
+ 0xb8400800,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0x4d600003,
+ 0xc80b5800,
+ 0x340d0001,
+ 0x4d800003,
+ 0x65ad0000,
+ 0xc80c6000,
+ 0x90c00800,
+ 0x20230002,
+ 0x8d6c1000,
+ 0x4460000b,
+ 0x65a10000,
+ 0x5c20ffee,
+ 0xc8021000,
+ 0xb8400800,
+ 0x2b8b0010,
+ 0x2b8c000c,
+ 0x2b8d0008,
+ 0x2b9d0004,
+ 0x379c0010,
+ 0xc3a00000,
+ 0xb9801000,
+ 0xb9600800,
+ 0xf800007b,
+ 0xb8201000,
+ 0xe3fffff2,
+ 0x2042001f,
+ 0x78030003,
+ 0x3863881c,
+ 0xb4421000,
+ 0xb4421000,
+ 0xb4621800,
+ 0x28630000,
+ 0xc0600000,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xb4210800,
+ 0xc3a00000,
+ 0x2042001f,
+ 0x78030003,
+ 0x3863889c,
+ 0xb4421000,
+ 0xb4421000,
+ 0xb4621800,
+ 0x28630000,
+ 0xc0600000,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0x00210001,
+ 0xc3a00000,
+ 0x2042001f,
+ 0x78030003,
+ 0x3863891c,
+ 0xb4421000,
+ 0xb4421000,
+ 0xb4621800,
+ 0x28630000,
+ 0xc0600000,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0x14210001,
+ 0xc3a00000,
+ 0x379cffe4,
+ 0x5b8b001c,
+ 0x5b8c0018,
+ 0x5b8d0014,
+ 0x5b8e0010,
+ 0x5b8f000c,
+ 0x5b900008,
+ 0x5b9d0004,
+ 0x340f0000,
+ 0xb8206800,
+ 0xb8405800,
+ 0xb8608000,
+ 0x340c0001,
+ 0xb9e07000,
+ 0xe000000a,
+ 0x49cb001c,
+ 0xb9600800,
+ 0x34020001,
+ 0xfbffff76,
+ 0xb8205800,
+ 0xb9800800,
+ 0x34020001,
+ 0xfbffff72,
+ 0xb8206000,
+ 0xf16d0800,
+ 0x7d830000,
+ 0x34020001,
+ 0xc8410800,
+ 0xa0230800,
+ 0x64210000,
+ 0x4420fff1,
+ 0x4580000d,
+ 0xb9800800,
+ 0x34020001,
+ 0x556d0003,
+ 0xc9ab6800,
+ 0xb9ec7800,
+ 0xfbffff8b,
+ 0xb8206000,
+ 0xb9600800,
+ 0x34020001,
+ 0xfbffff87,
+ 0xb8205800,
+ 0x5d80fff5,
+ 0xb9a00800,
+ 0x5e000002,
+ 0xb9e00800,
+ 0x2b8b001c,
+ 0x2b8c0018,
+ 0x2b8d0014,
+ 0x2b8e0010,
+ 0x2b8f000c,
+ 0x2b900008,
+ 0x2b9d0004,
+ 0x379c001c,
+ 0xc3a00000,
+ 0x00040100,
+ 0x01040100,
+ 0x02050100,
+ 0x03040200,
+ 0x04010100,
+ 0x05050200,
+ 0x06060100,
+ 0x07090200,
+ 0x00040100,
+ 0x01040100,
+ 0x02050100,
+ 0x03040200,
+ 0x04010100,
+ 0x05050200,
+ 0x06060100,
+ 0x07090100,
+ 0x08040100,
+ 0x09020100,
+ 0x0a030100,
+ 0x0b060100,
+ 0x0c080100,
+ 0x0d010100,
+ 0x0e020100,
+ 0x0f030100,
+ 0x10010100,
+ 0x11040100,
+ 0x12030100,
+ 0x13010100,
+ 0x14080100,
+ 0x15050100,
+ 0x16010100,
+ 0x17010100,
+ 0x18040100,
+ 0x1b060100,
+ 0x1c010100,
+ 0x00040100,
+ 0x8000001c,
+ 0x80000024,
+ 0x8000003c,
+ 0x80000044,
+ 0x8000004c,
+ 0x80000054,
+ 0x8000005c,
+ 0x80000064,
+ 0x80000124,
+ 0xc2100004,
+ 0x00029070,
+ 0x00029070,
+ 0x000293b8,
+ 0x000294e0,
+ 0x00029704,
+ 0x000298d0,
+ 0x0002a4e4,
+ 0x00029a74,
+ 0x0002a4a4,
+ 0x0002a1a8,
+ 0x000282ac,
+ 0x000282ac,
+ 0x00029364,
+ 0x000293c0,
+ 0x00029544,
+ 0x00029780,
+ 0x0002a4e4,
+ 0x00029908,
+ 0x0002a35c,
+ 0x00029b0c,
+ 0x000282f8,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00028300,
+ 0x00028308,
+ 0x00028310,
+ 0x00028318,
+ 0x00028320,
+ 0x00028328,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00028330,
+ 0x00028338,
+ 0x00028340,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00028348,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00028350,
+ 0x00028358,
+ 0x00028360,
+ 0x00028398,
+ 0x000283a0,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x000283a8,
+ 0x000283b4,
+ 0x000283c0,
+ 0x000283e4,
+ 0x00028408,
+ 0x00028410,
+ 0x00028418,
+ 0x00028420,
+ 0x00028428,
+ 0x00028430,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00028444,
+ 0x0002844c,
+ 0x0002904c,
+ 0x00028458,
+ 0x00028460,
+ 0x00028548,
+ 0x00028564,
+ 0x00028580,
+ 0x00028588,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00028590,
+ 0x00028598,
+ 0x000285a0,
+ 0x000285a8,
+ 0x000285b0,
+ 0x000285b8,
+ 0x000285c0,
+ 0x000285c8,
+ 0x000285d0,
+ 0x000285d8,
+ 0x000285e0,
+ 0x000285e8,
+ 0x000285f0,
+ 0x000285f8,
+ 0x00028600,
+ 0x00028608,
+ 0x00028610,
+ 0x00028618,
+ 0x00028620,
+ 0x00028628,
+ 0x00028630,
+ 0x00028638,
+ 0x00028640,
+ 0x0002864c,
+ 0x00028668,
+ 0x00028670,
+ 0x00028678,
+ 0x00028680,
+ 0x00028688,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00028690,
+ 0x00028698,
+ 0x000286a0,
+ 0x000286a8,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x000286b0,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x000286b8,
+ 0x000286cc,
+ 0x00028714,
+ 0x00028dec,
+ 0x00028df4,
+ 0x00028e4c,
+ 0x00028e54,
+ 0x00028e5c,
+ 0x00028e64,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00028ea0,
+ 0x0002904c,
+ 0x0002904c,
+ 0x000284a0,
+ 0x000284a8,
+ 0x00028ee4,
+ 0x00028eec,
+ 0x00028ef4,
+ 0x00028efc,
+ 0x00028f04,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00028f0c,
+ 0x00028f14,
+ 0x00028f1c,
+ 0x00028f24,
+ 0x00028f2c,
+ 0x00028f34,
+ 0x00028f3c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x000287a0,
+ 0x00028e6c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00028a74,
+ 0x00028cc4,
+ 0x0002904c,
+ 0x00028b9c,
+ 0x00028b10,
+ 0x00028d60,
+ 0x0002904c,
+ 0x00028c38,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002843c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x000284e8,
+ 0x000284f0,
+ 0x00028508,
+ 0x00028510,
+ 0x0002904c,
+ 0x00028518,
+ 0x00028530,
+ 0x00028f44,
+ 0x00028f64,
+ 0x00028f88,
+ 0x00028fa4,
+ 0x00028fc0,
+ 0x00028954,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00029054,
+ 0x00029054,
+ 0x00028738,
+ 0x0002876c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x000287d4,
+ 0x00028808,
+ 0x00028aa8,
+ 0x00028adc,
+ 0x00028bd0,
+ 0x00028c04,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00028cf8,
+ 0x00028d2c,
+ 0x0002883c,
+ 0x00028a14,
+ 0x00028a3c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x000288ec,
+ 0x000289fc,
+ 0x00028b70,
+ 0x00028c98,
+ 0x0002904c,
+ 0x00028dc0,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00029010,
+ 0x0002901c,
+ 0x00029024,
+ 0x00029030,
+ 0x00029000,
+ 0x00029008,
+ 0x00028a60,
+ 0x0002904c,
+ 0x00028940,
+ 0x00028b88,
+ 0x00028cb0,
+ 0x0002904c,
+ 0x00028dd8,
+ 0x0002904c,
+ 0x000286d8,
+ 0x000286f8,
+ 0x00029038,
+ 0x00028fe0,
+ 0x00028fe8,
+ 0x00028ff0,
+ 0x00028ff8,
+ 0x0002904c,
+ 0x0002904c,
+ 0x0002904c,
+ 0x00029040,
+ 0x00800092,
+ 0x00a300b6,
+ 0x00c800da,
+ 0x00ec0100,
+ 0x00029884,
+ 0x0002989c,
+ 0x000297b8,
+ 0x000298b8,
+ 0x000297cc,
+ 0x00029814,
+ 0x000298b4,
+ 0x00029b4c,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x00029da4,
+ 0x0002a184,
+ 0x0002a184,
+ 0x00029bd0,
+ 0x0002a184,
+ 0x00029cac,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a18c,
+ 0x0002a184,
+ 0x0002a184,
+ 0x00029b54,
+ 0x00029bb8,
+ 0x00029b6c,
+ 0x00029e04,
+ 0x00029e58,
+ 0x00029dc4,
+ 0x00029de4,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a140,
+ 0x0002a18c,
+ 0x0002a18c,
+ 0x0002a18c,
+ 0x0002a18c,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x00029c54,
+ 0x00029c74,
+ 0x00029b84,
+ 0x00029b9c,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x00029fd8,
+ 0x0002a018,
+ 0x00029fa8,
+ 0x00029f48,
+ 0x00029f78,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a18c,
+ 0x0002a05c,
+ 0x0002a078,
+ 0x00029bf8,
+ 0x00029c10,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a110,
+ 0x0002a128,
+ 0x00029e8c,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a184,
+ 0x0002a0e0,
+ 0x0002a094,
+ 0x0002a0b4,
+ 0x0002a0cc,
+ 0x0002a0d4,
+ 0x0002a148,
+ 0x0002a158,
+ 0x0002a17c,
+ 0x00029d04,
+ 0x00029d90,
+ 0x00029c28,
+ 0x0002c058,
+ 0x0002c148,
+ 0x0002c084,
+ 0x0002c148,
+ 0x0002c0b0,
+ 0x0002c148,
+ 0x0002c0dc,
+ 0x0002c148,
+ 0x0002c030,
+ 0x013014ab,
+ 0x013014b6,
+ 0x013014ac,
+ 0x013014be,
+ 0x010914e2,
+ 0x010914e1,
+ 0x01091507,
+ 0x00e70019,
+ 0xf6fcfe00,
+ 0x02040608,
+ 0x0002f430,
+ 0x0002f438,
+ 0x0002f440,
+ 0x0002f448,
+ 0x0002f450,
+ 0x0002f458,
+ 0x0002f460,
+ 0x0002f468,
+ 0x0002f470,
+ 0x0002f478,
+ 0x0002f480,
+ 0x0002f488,
+ 0x0002f490,
+ 0xff000100,
+ 0x02000100,
+ 0x03000100,
+ 0x02000100,
+ 0x00033528,
+ 0x00033554,
+ 0x00033568,
+ 0x00033578,
+ 0x00033584,
+ 0x0003433c,
+ 0x0003433c,
+ 0x0003433c,
+ 0x0003433c,
+ 0x0003433c,
+ 0x0003433c,
+ 0x0003433c,
+ 0x0003433c,
+ 0x00034360,
+ 0x00034360,
+ 0x00034360,
+ 0x00034360,
+ 0x00034390,
+ 0x00034440,
+ 0x00034464,
+ 0x000344a0,
+ 0x000344d0,
+ 0x000344dc,
+ 0x000344dc,
+ 0x000344dc,
+ 0x000344dc,
+ 0x00034524,
+ 0x00034524,
+ 0x00034524,
+ 0x00034524,
+ 0x000346c0,
+ 0x00034b3c,
+ 0x00034b5c,
+ 0x00034ba4,
+ 0x00034bd8,
+ 0x00034be4,
+ 0x00034be4,
+ 0x00034be4,
+ 0x00034be4,
+ 0x00034c20,
+ 0x00034c20,
+ 0x00034c20,
+ 0x00034c20,
+ 0x00034c94,
+ 0x00035ac4,
+ 0x00035ac4,
+ 0x00035acc,
+ 0x00035ad4,
+ 0x00035adc,
+ 0x00035ae4,
+ 0x00035aec,
+ 0x00035ac4,
+ 0x00035af8,
+ 0x00035b20,
+ 0x00035b38,
+ 0x00035b4c,
+ 0x00035b78,
+ 0x00035bc8,
+ 0x00035be0,
+ 0x00035bec,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00010000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00020100,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00030101,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00040201,
+ 0x01000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00050201,
+ 0x01010000,
+ 0x00000000,
+ 0x00000000,
+ 0x00060302,
+ 0x01010100,
+ 0x00000000,
+ 0x00000000,
+ 0x00070302,
+ 0x01010101,
+ 0x00000000,
+ 0x00000000,
+ 0x00080402,
+ 0x02010101,
+ 0x01000000,
+ 0x00000000,
+ 0x00090403,
+ 0x02010101,
+ 0x01010000,
+ 0x00000000,
+ 0x000a0503,
+ 0x02020101,
+ 0x01010100,
+ 0x00000000,
+ 0x000b0503,
+ 0x02020101,
+ 0x01010101,
+ 0x00000000,
+ 0x000c0604,
+ 0x03020201,
+ 0x01010101,
+ 0x01000000,
+ 0x000d0604,
+ 0x03020201,
+ 0x01010101,
+ 0x01010000,
+ 0x000e0704,
+ 0x03020202,
+ 0x01010101,
+ 0x01010100,
+ 0x000f0705,
+ 0x03030202,
+ 0x01010101,
+ 0x01010101,
+ 0x00037ac8,
+ 0x00037ac4,
+ 0x00037ac0,
+ 0x00037abc,
+ 0x00037ab8,
+ 0x00037ab4,
+ 0x00037ab0,
+ 0x00037aac,
+ 0x00037aa8,
+ 0x00037aa4,
+ 0x00037aa0,
+ 0x00037a9c,
+ 0x00037a98,
+ 0x00037a94,
+ 0x00037a90,
+ 0x00037a8c,
+ 0x00037a88,
+ 0x00037a84,
+ 0x00037a80,
+ 0x00037a7c,
+ 0x00037a78,
+ 0x00037a74,
+ 0x00037a70,
+ 0x00037a6c,
+ 0x00037a68,
+ 0x00037a64,
+ 0x00037a60,
+ 0x00037a5c,
+ 0x00037a58,
+ 0x00037a54,
+ 0x00037a50,
+ 0x00037a4c,
+ 0x00037b68,
+ 0x00037b64,
+ 0x00037b60,
+ 0x00037b5c,
+ 0x00037b58,
+ 0x00037b54,
+ 0x00037b50,
+ 0x00037b4c,
+ 0x00037b48,
+ 0x00037b44,
+ 0x00037b40,
+ 0x00037b3c,
+ 0x00037b38,
+ 0x00037b34,
+ 0x00037b30,
+ 0x00037b2c,
+ 0x00037b28,
+ 0x00037b24,
+ 0x00037b20,
+ 0x00037b1c,
+ 0x00037b18,
+ 0x00037b14,
+ 0x00037b10,
+ 0x00037b0c,
+ 0x00037b08,
+ 0x00037b04,
+ 0x00037b00,
+ 0x00037afc,
+ 0x00037af8,
+ 0x00037af4,
+ 0x00037af0,
+ 0x00037aec,
+ 0x00037c08,
+ 0x00037c04,
+ 0x00037c00,
+ 0x00037bfc,
+ 0x00037bf8,
+ 0x00037bf4,
+ 0x00037bf0,
+ 0x00037bec,
+ 0x00037be8,
+ 0x00037be4,
+ 0x00037be0,
+ 0x00037bdc,
+ 0x00037bd8,
+ 0x00037bd4,
+ 0x00037bd0,
+ 0x00037bcc,
+ 0x00037bc8,
+ 0x00037bc4,
+ 0x00037bc0,
+ 0x00037bbc,
+ 0x00037bb8,
+ 0x00037bb4,
+ 0x00037bb0,
+ 0x00037bac,
+ 0x00037ba8,
+ 0x00037ba4,
+ 0x00037ba0,
+ 0x00037b9c,
+ 0x00037b98,
+ 0x00037b94,
+ 0x00037b90,
+ 0x00037b8c,
+ 0x24002800,
+ 0x3c002001,
+ 0x12010e01,
+ 0x13011101,
+ 0x0c010b01,
+ 0x17010601,
+ 0x07012201,
+ 0x23012601,
+ 0x27012a01,
+ 0x2b010800,
+ 0x2e010a01,
+ 0xff000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00021e74,
+ 0x00021ec4,
+ 0x00031e20,
+ 0x00000000,
+ 0x00021a70,
+ 0x0002daf0,
+ 0x0002cd24,
+ 0x00000000,
+ 0x0002c47c,
+ 0x00000000,
+ 0x00000000,
+ 0x0002cca4,
+ 0x0002bfc0,
+ 0x0002d9ec,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x0002d814,
+ 0x00000000,
+ 0x00021cac,
+ 0x00021b1c,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00021a4c,
+ 0x00000000,
+ 0x00021f14,
+ 0x00021f64,
+ 0x00021adc,
+ 0x00000000,
+ 0x00021fb4,
+ 0x00022004,
+ 0x00021afc,
+ 0x00000000,
+ 0x00022054,
+ 0x000220a4,
+ 0x00000000,
+ 0x00000000,
+ 0x000220f4,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00021e2c,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x0003f9e8,
+ 0x0003fd00,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00024a68,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x80402010,
+ 0x08040200,
+ 0x58606870,
+ 0x78808890,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000bb8,
+ 0x0bb8cccc,
+ 0x80000001,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x000003ff,
+ 0x322d2823,
+ 0x1e19140f,
+ 0x342f2a25,
+ 0x201b1611,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x322d2823,
+ 0x1e19140f,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000100,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000001,
+ 0x00000000,
+ 0x00000000,
+ 0x00000001,
+ 0x00000000,
+ 0x00000000,
+ 0x00000001,
+ 0x00000000,
+ 0x00000000,
+ 0x00000001,
+ 0x00000000,
+ 0x00000000,
+ 0x00000001,
+ 0x00000000,
+ 0x00000000,
+ 0x00000001,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xffffffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xffffffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xffffffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xffffffff,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x26000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000064,
+ 0x028e0000,
+ 0x01000005,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x04000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000050,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xe6000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00022fdc,
+ 0x00022fdc,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00010101,
+ 0x00000101,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000050,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00025000,
+ 0x00025000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000101,
+ 0x01010100,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x01000100,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x000003ff,
+ 0xfffffc00,
+ 0x00000003,
+ 0x0000000a,
+ 0x00000400,
+ 0x00000007,
+ 0x000000ff,
+ 0x00000008,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x08000000,
+ 0x00080000,
+ 0x00000190,
+ 0x00002710,
+ 0x00000050,
+ 0x0001011f,
+ 0x00010100,
+ 0x00000300,
+ 0x00000000,
+ 0x00000320,
+ 0x00004e20,
+ 0x00000050,
+ 0x0001001e,
+ 0x00010100,
+ 0x00000400,
+ 0x00000000,
+ 0x000004b0,
+ 0x00007530,
+ 0x00000050,
+ 0x0001001d,
+ 0x00010100,
+ 0x00000500,
+ 0x00000000,
+ 0x00000640,
+ 0x00009c40,
+ 0x00000050,
+ 0x0000001c,
+ 0x00010100,
+ 0x00000500,
+ 0x00000000,
+ 0x000007d0,
+ 0x0000c350,
+ 0x00000050,
+ 0x0000001b,
+ 0x01010100,
+ 0x00000500,
+ 0x00000000,
+ 0x00000960,
+ 0x0000ea60,
+ 0x00000050,
+ 0x0000001a,
+ 0x01010100,
+ 0x00000500,
+ 0x00000000,
+ 0x00000af0,
+ 0x00011170,
+ 0x00000050,
+ 0x00000019,
+ 0x01010100,
+ 0x00000500,
+ 0x00000000,
+ 0x00000c80,
+ 0x00013880,
+ 0x00000050,
+ 0x00000018,
+ 0x01010100,
+ 0x00000500,
+ 0x00000000,
+ 0x00000000,
+ 0x00000140,
+ 0x00000064,
+ 0x40010000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00002710,
+ 0x0e103000,
+ 0x00000000,
+ 0x00004e20,
+ 0x0e742d00,
+ 0x00000000,
+ 0x00007530,
+ 0x0ed82a00,
+ 0x00000000,
+ 0x00009c40,
+ 0x0f3c2700,
+ 0x00000000,
+ 0x0000c350,
+ 0x0fa02400,
+ 0x00000000,
+ 0x0000ea60,
+ 0x10042100,
+ 0x00000000,
+ 0x00011170,
+ 0x10681e00,
+ 0x00000000,
+ 0x00013880,
+ 0x10cc1b00,
+ 0x00000000,
+ 0x00000000,
+ 0x00000001,
+ 0x00000000,
+ 0x00600000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00002710,
+ 0x000003e8,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ SMU_FIRMWARE_PADS_1K
+ SMU_FIRMWARE_PADS_1K
+ SMU_FIRMWARE_PADS_1K
+ SMU_FIRMWARE_PADS_1K
+ SMU_FIRMWARE_PADS_1K
+ SMU_FIRMWARE_PADS_1K
+ SMU_FIRMWARE_PADS_1K
+ SMU_FIRMWARE_PADS_1K
+};
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbTablesKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbTablesKB.c
new file mode 100644
index 0000000..5c1fef2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbTablesKB.c
@@ -0,0 +1,499 @@
+/**
+ * @file
+ *
+ * GNB init tables
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 86714 $ @e \$Date: 2013-01-24 17:51:46 -0600 (Thu, 24 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbTable.h"
+#include "GnbRegistersKB.h"
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T A B L E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+GNB_TABLE ROMDATA GnbEarlierInitTableBeforeSmuKB [] = {
+ GNB_ENTRY_RMW (
+ D0F0x98_x07_TYPE,
+ D0F0x98_x07_ADDRESS,
+ D0F0x98_x07_SMUCsrIsocEn_MASK,
+ (1 << D0F0x98_x07_SMUCsrIsocEn_OFFSET)
+ ),
+ GNB_ENTRY_RMW (
+ D0F0x98_x1E_TYPE,
+ D0F0x98_x1E_ADDRESS,
+ D0F0x98_x1E_HiPriEn_MASK,
+ (1 << D0F0x98_x1E_HiPriEn_OFFSET)
+ ),
+ GNB_ENTRY_TERMINATE
+};
+
+GNB_TABLE ROMDATA GnbEarlyInitTableKB [] = {
+ // Set SVI2
+ GNB_ENTRY_PROPERTY_RMW (
+ TABLE_PROPERTY_SVI2,
+ 0x4,
+ 0x3F9D8,
+ 0x20000000,
+ (1 << 29)
+ ),
+ GNB_ENTRY_WR (
+ D0F0x04_TYPE,
+ D0F0x04_ADDRESS,
+ (0x1 << D0F0x04_MemAccessEn_WIDTH)
+ ),
+ GNB_ENTRY_RMW (
+ D0F0x64_x16_TYPE,
+ D0F0x64_x16_ADDRESS,
+ D0F0x64_x16_AerUrMsgEn_MASK,
+ 0x0 << D0F0x64_x16_AerUrMsgEn_OFFSET
+ ),
+ GNB_ENTRY_RMW (
+ D0F0x98_x07_TYPE,
+ D0F0x98_x07_ADDRESS,
+ D0F0x98_x07_IocBwOptEn_MASK | D0F0x98_x07_DropZeroMaskWrEn_MASK,
+ (1 << D0F0x98_x07_IocBwOptEn_OFFSET) | (1 << D0F0x98_x07_DropZeroMaskWrEn_OFFSET)
+ ),
+
+ GNB_ENTRY_RMW (
+ D0F0x98_x0C_TYPE,
+ D0F0x98_x0C_ADDRESS,
+ D0F0x98_x0C_GcmWrrLenA_MASK | D0F0x98_x0C_GcmWrrLenB_MASK,
+ (0x8 << D0F0x98_x0C_GcmWrrLenA_OFFSET) | (0x8 << D0F0x98_x0C_GcmWrrLenB_OFFSET)
+ ),
+
+ // Enable voltage controller
+ GNB_ENTRY_WR (
+ SMU_MSG_TYPE,
+ SMC_MSG_VOLTAGE_CNTL_ENABLE,
+ 0
+ ),
+//---------------------------------------------------------------------------
+ GNB_ENTRY_COPY (
+ 0x9,
+ 0x49,
+ 0,
+ 32,
+ D0F0x64_x1F_TYPE,
+ D0F0x64_x1F_ADDRESS,
+ 0,
+ 32
+ ),
+ // Enable VPC
+ // CSR_GNB_1.SviTrimValueVdd = Vdd Trim
+ GNB_ENTRY_COPY (
+ 0x4,
+ 0x3F9F4,
+ 16, 8,
+ D18F5x12C_TYPE,
+ D18F5x12C_ADDRESS,
+ D18F5x12C_CoreLoadLineTrim_OFFSET, D18F5x12C_CoreLoadLineTrim_WIDTH
+ ),
+ // CSR_GNB_1.SviTrimValueVddNB = VddNB Trim
+ GNB_ENTRY_COPY (
+ 0x4,
+ 0x3F9F4,
+ 24, 8,
+ D18F5x188_TYPE,
+ D18F5x188_ADDRESS,
+ D18F5x188_NbLoadLineTrim_OFFSET, D18F5x188_NbLoadLineTrim_WIDTH
+ ),
+ // CSR_GNB_3.SviLoadLineOffsetVdd = Vdd Offset
+
+ GNB_ENTRY_COPY (
+ 0x4,
+ 0x3F9F8,
+ 0, 8,
+ D18F5x12C_TYPE,
+ D18F5x12C_ADDRESS,
+ D18F5x12C_CoreOffsetTrim_OFFSET, D18F5x12C_CoreOffsetTrim_WIDTH
+ ),
+ // CSR_GNB_3.SviLoadLineOffsetVddNB = VddNB Offset
+ GNB_ENTRY_COPY (
+ 0x4,
+ 0x3F9F8,
+ 8, 8,
+ D18F5x188_TYPE,
+ D18F5x188_ADDRESS,
+ D18F5x188_NbOffsetTrim_OFFSET, D18F5x188_NbOffsetTrim_WIDTH
+ ),
+
+ // Set SRBM time out
+ GNB_ENTRY_RMW (
+ 0x12,
+ 0xE40,
+ 0x1FFF,
+ (0x1FFF << 0)
+ ),
+ GNB_ENTRY_TERMINATE
+};
+
+GNB_TABLE ROMDATA GnbEnvInitTableKB [] = {
+ //---------------------------------------------------------------------------
+
+ // SMU Enable Thermal Controller
+ GNB_ENTRY_WR (
+ SMU_MSG_TYPE,
+ 56,
+ 0
+ ),
+ // Enable VPC
+ GNB_ENTRY_PROPERTY_RMW (
+ 0x00040000ul,
+ 0x4,
+ 0x3F9D8,
+ 0x1,
+ (1 << 0)
+ ),
+ // Enable LHTC
+ GNB_ENTRY_PROPERTY_WR (
+ TABLE_PROPERTY_LHTC,
+ SMU_MSG_TYPE,
+ 70,
+ 0
+ ),
+ GNB_ENTRY_PROPERTY_WR (
+ 0x00040000ul,
+ SMU_MSG_TYPE,
+ SMC_MSG_CONFIG_VPC_ACCUMULATOR,
+ 0
+ ),
+
+ // PM_CONFIG.f.enable_tdc_limit = 1;
+ GNB_ENTRY_PROPERTY_RMW (
+ 0x00040000ul,
+ 0x4,
+ 0x3F9D8,
+ 0x4,
+ (1 << 2)
+ ),
+ GNB_ENTRY_PROPERTY_WR (
+ 0x00040000ul,
+ SMU_MSG_TYPE,
+ 46,
+ 0
+ ),
+
+ // Enable Package Power Limit
+ GNB_ENTRY_PROPERTY_WR (
+ 0x00080000ul,
+ SMU_MSG_TYPE,
+ SMC_MSG_ENABLE_PKGPWRLIMIT,
+ 0
+ ),
+
+ // Enable BAPM
+ // PM_CONFIG.f.enable_bapm = 1;
+ GNB_ENTRY_PROPERTY_RMW (
+ TABLE_PROPERTY_BAPM,
+ 0x4,
+ 0x3F9D8,
+ 0x2,
+ (1 << 1)
+ ),
+ GNB_ENTRY_PROPERTY_WR (
+ TABLE_PROPERTY_BAPM,
+ SMU_MSG_TYPE,
+ 48,
+ 0
+ ),
+//---------------------------------------------------------------------------
+// ORB Init
+ GNB_ENTRY_RMW (
+ D0F0x98_x07_TYPE,
+ D0F0x98_x07_ADDRESS,
+ D0F0x98_x07_IocBwOptEn_MASK | D0F0x98_x07_DropZeroMaskWrEn_MASK,
+ (0x1 << D0F0x98_x07_IocBwOptEn_OFFSET) | (0x1 << D0F0x98_x07_DropZeroMaskWrEn_OFFSET)
+ ),
+ GNB_ENTRY_RMW (
+ D0F0x98_x07_TYPE,
+ D0F0x98_x07_ADDRESS,
+ D0F0x98_x07_IommuBwOptEn_MASK | D0F0x98_x07_IommuIsocPassPWMode_MASK | D0F0x98_x07_DmaReqRespPassPWMode_MASK,
+ (0x1 << D0F0x98_x07_IommuBwOptEn_OFFSET) | (0x1 << D0F0x98_x07_IommuIsocPassPWMode_OFFSET) | (0 << D0F0x98_x07_DmaReqRespPassPWMode_OFFSET)
+ ),
+ GNB_ENTRY_RMW (
+ D0F0x98_x08_TYPE,
+ D0F0x98_x08_ADDRESS,
+ D0F0x98_x08_NpWrrLenC_MASK,
+ 0x1 << D0F0x98_x08_NpWrrLenC_OFFSET
+ ),
+ GNB_ENTRY_RMW (
+ D0F0x98_x28_TYPE,
+ D0F0x98_x28_ADDRESS,
+ D0F0x98_x28_ForceCoherentIntr_MASK,
+ 0x1 << D0F0x98_x28_ForceCoherentIntr_OFFSET
+ ),
+ GNB_ENTRY_RMW (
+ D0F0x98_x2C_TYPE,
+ D0F0x98_x2C_ADDRESS,
+ D0F0x98_x2C_SBDmaActiveMask_MASK | D0F0x98_x2C_CgttLclkOverride_MASK,
+ (1 << D0F0x98_x2C_SBDmaActiveMask_OFFSET) | (1 << D0F0x98_x2C_CgttLclkOverride_OFFSET)
+ ),
+ // Enable gBIF UID Clumping [BIT 23:21 = 011b]
+ GNB_ENTRY_RMW (
+ D0F0x98_x3A_TYPE,
+ D0F0x98_x3A_ADDRESS,
+ 0x00E00000,
+ 0x00600000
+ ),
+ GNB_ENTRY_RMW (
+ D18F0x110_TYPE,
+ D18F0x110_ADDRESS,
+ 0x00E00000,
+ 0x00600000
+ ),
+ //NB P-state Configuration for Runtime
+ GNB_ENTRY_RMW (
+ 0x4,
+ 0x3F9E8,
+ 0xFF | 0xFF00 |
+ 0xFF0000 | 0xFF000000,
+ (3 << 0) | (0 << 8) |
+ (2 << 16) | (1 << 24)
+ ),
+ // Programming a conservative watermark for NBP states
+ GNB_ENTRY_RMW (
+ 0x12,
+ 0x6cd8,
+ 0x10 |
+ 0x100 |
+ 0xffff0000,
+ (1 << 4) |
+ (1 << 8) |
+ (0x7FFF << 16)
+ ),
+
+ GNB_ENTRY_RMW (
+ 0x12,
+ 0x6cc8,
+ 0x3 |
+ 0x30000,
+ (0x3 << 0) |
+ (0x3 << 16)
+ ),
+
+ GNB_ENTRY_RMW (
+ 0x12,
+ 0x6cd4,
+ 0xffff0000,
+ (0x7FFF << 16)
+ ),
+
+ GNB_ENTRY_RMW (
+ 0x12,
+ 0x6cd4,
+ 0x1,
+ (1 << 0)
+ ),
+
+ GNB_ENTRY_RMW (
+ 0x12,
+ 0x6cd8,
+ 0x1,
+ (1 << 0)
+ ),
+
+ GNB_ENTRY_TERMINATE
+};
+
+GNB_TABLE ROMDATA GnbMidInitTableKB [] = {
+//---------------------------------------------------------------------------
+// ORB clock gating
+ GNB_ENTRY_PROPERTY_RMW (
+ 0x00000008ul,
+ D0F0x98_x49_TYPE,
+ D0F0x98_x49_ADDRESS,
+ D0F0x98_x49_SoftOverrideClk6_MASK | D0F0x98_x49_SoftOverrideClk5_MASK | D0F0x98_x49_SoftOverrideClk4_MASK | D0F0x98_x49_SoftOverrideClk3_MASK | D0F0x98_x49_SoftOverrideClk2_MASK | D0F0x98_x49_SoftOverrideClk1_MASK | D0F0x98_x49_SoftOverrideClk0_MASK,
+ 0x0
+ ),
+ GNB_ENTRY_PROPERTY_RMW (
+ 0x00000008ul,
+ D0F0x98_x4A_TYPE,
+ D0F0x98_x4A_ADDRESS,
+ D0F0x98_x4A_SoftOverrideClk6_MASK | D0F0x98_x4A_SoftOverrideClk5_MASK | D0F0x98_x4A_SoftOverrideClk4_MASK | D0F0x98_x4A_SoftOverrideClk3_MASK | D0F0x98_x4A_SoftOverrideClk2_MASK | D0F0x98_x4A_SoftOverrideClk1_MASK | D0F0x98_x4A_SoftOverrideClk0_MASK,
+ 0x0
+ ),
+ GNB_ENTRY_PROPERTY_RMW (
+ 0x00000008ul,
+ D0F0x98_x2C_TYPE,
+ D0F0x98_x2C_ADDRESS,
+ D0F0x98_x2C_CgttLclkOverride_MASK,
+ 0x0
+ ),
+//---------------------------------------------------------------------------
+// IOC clock gating
+ GNB_ENTRY_PROPERTY_RMW (
+ 0x00000010ul,
+ D0F0x64_x22_TYPE,
+ D0F0x64_x22_ADDRESS,
+ 0x4000000 | 0x8000000 | 0x10000000 | 0x20000000 | 0x40000000,
+ 0x0
+ ),
+ GNB_ENTRY_PROPERTY_RMW (
+ 0x00000010ul,
+ D0F0x64_x23_TYPE,
+ D0F0x64_x23_ADDRESS,
+ 0x4000000 | 0x8000000 | 0x10000000 | 0x20000000 | 0x40000000,
+ 0x0
+ ),
+ GNB_ENTRY_PROPERTY_RMW (
+ 0x00000010ul,
+ D0F0x64_x46_TYPE,
+ D0F0x64_x46_ADDRESS,
+ 0x10000,
+ 0x0
+ ),
+ //---------------------------------------------------------------------------
+ GNB_ENTRY_RMW (
+ 0x4,
+ 0xc0200110,
+ 0x18 | 0x1 |
+ 0x2 | 0x200 |
+ 0x400,
+ (0x3 << 3) |
+ (0 << 0) |
+ (0x0 << 1) |
+ (0x1 << 9) |
+ (0x1 << 10)
+ ),
+//---------------------------------------------------------------------------
+ GNB_ENTRY_PROPERTY_RMW (
+ TABLE_PROPERTY_LCLK_DEEP_SLEEP,
+ 0x4,
+ 0xc0200310,
+ 0x20 |
+ 0x40 |
+ 0x80 |
+ 0x100 |
+ 0x200 |
+ 0x400 |
+ 0x800 |
+ 0x1000 |
+ 0x2000 |
+ 0x4000 |
+ 0x8000 |
+ 0x10000 |
+ 0x20000 |
+ 0x40000 |
+ 0x80000 |
+ 0x100000 |
+ 0x1 |
+ 0x2 |
+ 0x4,
+ ( 1 << 5) |
+ ( 0 << 6) |
+ ( 0 << 7) |
+ ( 0 << 8) |
+ ( 0 << 9) |
+ ( 1 << 10) |
+ ( 1 << 11) |
+ ( 1 << 12) |
+ ( 1 << 13) |
+ ( 1 << 14) |
+ ( 1 << 15) |
+ ( 1 << 16) |
+ ( 1 << 17) |
+ ( 1 << 18) |
+ ( 1 << 19) |
+ ( 1 << 20) |
+ ( 1 << 0) |
+ ( 1 << 1) |
+ ( 1 << 2)
+ ),
+ GNB_ENTRY_PROPERTY_RMW (
+ TABLE_PROPERTY_LCLK_DEEP_SLEEP,
+ 0x4,
+ 0xc020008c,
+ 0x7 |
+ 0x8 |
+ 0xfff0,
+ ( 5 << 0) |
+ ( 0 << 3) |
+ ( 0xF << 4)
+ ),
+ GNB_ENTRY_PROPERTY_RMW (
+ TABLE_PROPERTY_IGFX_DISABLED,
+ 0x4,
+ 0xc0200310,
+ 0x200000,
+ 0x0
+ ),
+// Reset : 0, Enable : 1
+ GNB_ENTRY_PROPERTY_RMW (
+ TABLE_PROPERTY_LCLK_DEEP_SLEEP,
+ 0x4,
+ 0xc020008c,
+ 0x80000000,
+ (0x1 << 31)
+ ),
+//---------------------------------------------------------------------------
+ GNB_ENTRY_TERMINATE
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbUraKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbUraKB.c
new file mode 100644
index 0000000..c5eb8a1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbUraKB.c
@@ -0,0 +1,260 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Initialize PP/DPM fuse table.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "GnbUra.h"
+#include "GnbUraToken.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbRegistersKB.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GNBURAKB_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GnbUraGetKB (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN_INFO *UraTokenInfo,
+ IN OUT VOID *Value
+ );
+
+VOID
+GnbUraSetKB (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN_INFO *UraTokenInfo,
+ IN OUT VOID *Value
+ );
+
+VOID
+GnbUraStreamSetKB (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN_INFO *UraTokenInfo,
+ IN OUT URA_TUPLE *UraTuple,
+ IN UINT32 CombinedCount
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Gnb Unified Register Access method
+ *
+ *
+ * @param[in] Device Pointer to Device object
+ * @param[in] UraTokenInfo Pointer to URA_TOKEN_INFO structure
+ * @param[in, out] Value Pointer to Context
+ */
+VOID
+GnbUraGetKB (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN_INFO *UraTokenInfo,
+ IN OUT VOID *Value
+ )
+{
+ ACCESS_WIDTH Width;
+ UINT32 RegValue;
+ UINT32 FieldMask;
+ UINT32 TargetAddress;
+
+ RegValue = 0;
+ Width = (UraTokenInfo->Flags == GNB_URA_FLAG_S3SAVE) ? AccessS3SaveWidth32 : AccessWidth32;
+ switch (UraTokenInfo->MethodType) {
+ case TYPE_GNB_INDIRECT_ACCESS:
+ TargetAddress = Device->DevPciAddress.AddressValue | UraTokenInfo->RegDomainType;
+ GnbLibPciIndirectRead ( TargetAddress, UraTokenInfo->RegAddress, Width, &RegValue, Device->StdHeader);
+ IDS_HDT_CONSOLE (NB_MISC, " Ura GET: RegDomainType = 0x%x IndirectAddress = 0x%08x, Value = 0x%08x\n", UraTokenInfo->RegDomainType, UraTokenInfo->RegAddress, RegValue);
+ break;
+
+ case TYPE_GNB_PROTOCOL_ACCESS:
+ TargetAddress = UraTokenInfo->RegDomainType;
+ GnbRegisterReadKB (Device->GnbHandle, (UINT8)TargetAddress, UraTokenInfo->RegAddress, &RegValue, UraTokenInfo->Flags, Device->StdHeader);
+ IDS_HDT_CONSOLE (NB_MISC, " Ura GET: RegDomainType = %d, Address = 0x%08x, Value = 0x%08x\n", TargetAddress, UraTokenInfo->RegAddress, RegValue);
+ break;
+
+ default:
+ ASSERT (FALSE);
+ return;
+ }
+
+ if (UraTokenInfo->WholeRegAccess == TRUE) {
+ *(UINT32 *)Value = RegValue;
+ } else {
+ RegValue = RegValue >> UraTokenInfo->BfOffset;
+ FieldMask = (((UINT32)1 << UraTokenInfo->BfWidth) - 1);
+ *(UINT32 *)Value = RegValue & FieldMask;
+ }
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Gnb Unified Register Access method
+ *
+ *
+ * @param[in] Device Pointer to Device object
+ * @param[in] UraTokenInfo Pointer to URA_TOKEN_INFO structure
+ * @param[in, out] Value Pointer to Context
+ */
+VOID
+GnbUraSetKB (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN_INFO *UraTokenInfo,
+ IN OUT VOID *Value
+ )
+{
+ ACCESS_WIDTH Width;
+ UINT32 RegValue;
+ UINT32 TargetValue;
+ UINT32 FieldMask;
+ UINT32 TempValue;
+
+ Width = (UraTokenInfo->Flags == GNB_URA_FLAG_S3SAVE) ? AccessS3SaveWidth32 : AccessWidth32;
+ FieldMask = 0;
+ TempValue = *(UINT32 *)Value;
+
+ switch (UraTokenInfo->MethodType) {
+ case TYPE_GNB_INDIRECT_ACCESS:
+ if (UraTokenInfo->WholeRegAccess == TRUE) {
+ TargetValue = TempValue;
+ } else {
+ GnbLibPciIndirectRead ( Device->DevPciAddress.AddressValue | UraTokenInfo->RegDomainType, UraTokenInfo->RegAddress, Width, &RegValue, Device->StdHeader);
+ FieldMask = (((UINT32)1 << UraTokenInfo->BfWidth) - 1);
+ TargetValue = RegValue & (~(FieldMask << UraTokenInfo->BfOffset));
+ TargetValue |= (TempValue & FieldMask) << UraTokenInfo->BfOffset;
+ }
+ GnbLibPciIndirectWrite ( Device->DevPciAddress.AddressValue | UraTokenInfo->RegDomainType, UraTokenInfo->RegAddress, Width, &TargetValue, Device->StdHeader);
+ IDS_HDT_CONSOLE (NB_MISC, " Ura SET: RegDomainType = 0x%x IndirectAddress = 0x%08x, Value = 0x%08x\n", UraTokenInfo->RegDomainType, UraTokenInfo->RegAddress, TargetValue);
+ break;
+
+ case TYPE_GNB_PROTOCOL_ACCESS:
+ if (UraTokenInfo->WholeRegAccess == TRUE) {
+ TargetValue = TempValue;
+ } else {
+ GnbRegisterReadKB (Device->GnbHandle, UraTokenInfo->RegDomainType, UraTokenInfo->RegAddress, &RegValue, UraTokenInfo->Flags, Device->StdHeader);
+ FieldMask = (((UINT32)1 << UraTokenInfo->BfWidth) - 1);
+ TargetValue = RegValue & (~(FieldMask << UraTokenInfo->BfOffset));
+ TargetValue |= (TempValue & FieldMask) << UraTokenInfo->BfOffset;
+ }
+ GnbRegisterWriteKB (Device->GnbHandle, UraTokenInfo->RegDomainType, UraTokenInfo->RegAddress, &TargetValue, UraTokenInfo->Flags, Device->StdHeader);
+ IDS_HDT_CONSOLE (NB_MISC, " Ura SET: RegDomainType = %d, Address = 0x%08x, Value = 0x%08x\n", UraTokenInfo->RegDomainType, UraTokenInfo->RegAddress, TargetValue);
+ break;
+
+ default:
+ ASSERT (FALSE);
+ break;
+ }
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Gnb Unified Register Access method
+ *
+ *
+ * @param[in] Device Pointer to device object
+ * @param[in] UraTokenInfo Pointer to URA_TOKEN_INFO structure
+ * @param[in, out] UraTuple Pointer to structure URA_TUPLE
+ * @param[in] CombinedCount Token count
+ */
+VOID
+GnbUraStreamSetKB (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN_INFO *UraTokenInfo,
+ IN OUT URA_TUPLE *UraTuple,
+ IN UINT32 CombinedCount
+ )
+{
+ ACCESS_WIDTH Width;
+ UINT32 RegValue;
+ UINT32 Index;
+ UINT32 StreamSetAddress;
+ UINT32 StepLength;
+ UINT32 TargetAddress;
+
+ Width = (UraTokenInfo->Flags == GNB_URA_FLAG_S3SAVE) ? AccessS3SaveWidth32 : AccessWidth32;
+ StreamSetAddress = UraTokenInfo->RegAddress;
+ StepLength = UraTuple->StepLength;
+ for (Index = 0; Index < CombinedCount; Index++) {
+ RegValue = *(((UINT32 *) ((UINTN)UraTuple->Value)) + Index);
+ switch (UraTokenInfo->MethodType) {
+ case TYPE_GNB_INDIRECT_ACCESS:
+ TargetAddress = Device->DevPciAddress.AddressValue | UraTokenInfo->RegDomainType;
+ //IDS_HDT_CONSOLE (NB_MISC, "0x%08x:0x%08x, \n", StreamSetAddress, RegValue);
+ GnbLibPciIndirectWrite (TargetAddress, StreamSetAddress, Width, &RegValue, Device->StdHeader);
+ break;
+
+ case TYPE_GNB_PROTOCOL_ACCESS:
+ TargetAddress = UraTokenInfo->RegDomainType;
+ GnbRegisterWriteKB (Device->GnbHandle, (UINT8)TargetAddress, StreamSetAddress, &RegValue, UraTokenInfo->Flags, Device->StdHeader);
+ break;
+
+ default:
+ ASSERT (FALSE);
+ return;
+ }
+ StreamSetAddress += StepLength;
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbUraTokenMapKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbUraTokenMapKB.c
new file mode 100644
index 0000000..2d75fce
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/GnbUraTokenMapKB.c
@@ -0,0 +1,122 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AGESA gnb file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ ******************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbUra.h"
+#include "GnbUraToken.h"
+#include "GnbRegistersKB.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_GNBURATOKENMAPKB_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+GnbUraLocateRegTblKB (
+ IN DEV_OBJECT *Device,
+ IN OUT UINT32 *UraTableAddress
+ );
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+REG_FIELD_TABLE_STRUCT UraTableKB = {
+ {0xC2100000, 0x4, 0},
+ {0, 1, FIELD_OFFSET(RxSmuIntReq ,BfxSmuIntToggle)},
+ {1, 16, FIELD_OFFSET(RxSmuIntReq ,BfxSmuServiceIndex)},
+ {0xC2100004, 0x4, 0},
+ {0, 1, FIELD_OFFSET(RxSmuIntSts ,BfxSmuIntAck)},
+ {1, 1, FIELD_OFFSET(RxSmuIntSts ,BfxSmuIntDone)},
+ {0xE0003088, 0x4, 0},
+ {0, 1, FIELD_OFFSET(RxSmuAuthSts ,BfxSmuAuthDone)},
+ {1, 1, FIELD_OFFSET(RxSmuAuthSts ,BfxSmuAuthPass)},
+ {0xE00030A4, 0x4, 0},
+ {16, 1, FIELD_OFFSET(RxSmuFwAuth ,BfxSmuProtectedMode)},
+ {0xC0000004, 0x4, 0},
+ {7, 1, FIELD_OFFSET(REG_FIELD_TABLE_STRUCT_fld11 ,BfxSmuBootSeqDone)},
+ {0x3F800, 0x4, 0},
+ {0, 1, FIELD_OFFSET(RxSmuFwFlags ,BfxSmuInterruptsEnabled)},
+ {0x80000000, 0x4, 0},
+ {0, 1, FIELD_OFFSET(RxSmuResetCntl ,BfxSmuRstReg)},
+ {0x80000004, 0x4, 0},
+ {0, 1, FIELD_OFFSET(RxSmuClkCntl ,BfxSmuCkDisable)},
+ {0x80008000, 0x4, 0},
+ {D0F0xBC_x20000_ADDRESS, D0F0xBC_x20000_TYPE, 0},
+ {D0F0xBC_x0_ADDRESS, D0F0xBC_x0_TYPE, 0},
+ {D0F0xBC_xC210003C_ADDRESS, D0F0xBC_xC210003C_TYPE, 0},
+
+};
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Gnb Unified Register Access method to locate register table.
+ *
+ *
+ * @param[in] Device Standard configuration header
+ * @param[in, out] UraTableAddress Ura register table address
+ */
+VOID
+GnbUraLocateRegTblKB (
+ IN DEV_OBJECT *Device,
+ IN OUT UINT32 *UraTableAddress
+ )
+{
+ *UraTableAddress = (UINT32)((UINTN)(&UraTableKB));
+ return;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieComplexDataKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieComplexDataKB.c
new file mode 100644
index 0000000..5fd3cca
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieComplexDataKB.c
@@ -0,0 +1,447 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Family specific PCIe configuration data
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "PcieComplexDataKB.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_PCIECOMPLEXDATAKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+PcieGetComplexDataLengthKB (
+ IN UINT8 SocketId,
+ OUT UINTN *Length,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+PcieBuildComplexConfigurationKB (
+ IN UINT8 SocketId,
+ OUT VOID *Buffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+PcieGetNativePhyLaneBitmapKB (
+ IN UINT32 PhyLaneBitmap,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+//
+// Complex configuration
+//
+
+KB_COMPLEX_CONFIG ComplexDataKB = {
+ //Silicon
+ {
+ {
+ DESCRIPTOR_SILICON | DESCRIPTOR_TERMINATE_LIST | DESCRIPTOR_TERMINATE_GNB | DESCRIPTOR_TERMINATE_TOPOLOGY,
+ 0,
+ 0,
+ offsetof (KB_COMPLEX_CONFIG, GppWrapper) - offsetof (KB_COMPLEX_CONFIG, Silicon)
+ },
+ 0,
+ 0xFF,
+ 0xFF
+ },
+ //Gpp Wrapper
+ {
+ {
+ DESCRIPTOR_PCIE_WRAPPER,
+ offsetof (KB_COMPLEX_CONFIG, GppWrapper) - offsetof (KB_COMPLEX_CONFIG, Silicon),
+ offsetof (KB_COMPLEX_CONFIG, DdiWrapper) - offsetof (KB_COMPLEX_CONFIG, GppWrapper),
+ offsetof (KB_COMPLEX_CONFIG, PortPBR4) - offsetof (KB_COMPLEX_CONFIG, GppWrapper)
+ },
+ GPP_WRAP_ID,
+ GPP_NUMBER_OF_PIFs,
+ GPP_START_PHY_LANE,
+ GPP_END_PHY_LANE,
+ GPP_CORE_ID,
+ GPP_CORE_ID,
+ GPP_END_PHY_LANE - GPP_START_PHY_LANE + 1,
+ {
+ 1,
+ 1,
+ 1,
+ 1,
+ 1,
+ 1,
+ 1
+ },
+ },
+ //Virtual DDI Wrapper
+ {
+ {
+ DESCRIPTOR_DDI_WRAPPER | DESCRIPTOR_VIRTUAL | DESCRIPTOR_TERMINATE_LIST | DESCRIPTOR_TERMINATE_GNB | DESCRIPTOR_TERMINATE_TOPOLOGY,
+ offsetof (KB_COMPLEX_CONFIG, DdiWrapper) - offsetof (KB_COMPLEX_CONFIG, Silicon),
+ 0,
+ offsetof (KB_COMPLEX_CONFIG, Ddi1) - offsetof (KB_COMPLEX_CONFIG, DdiWrapper)
+ },
+ DDI_WRAP_ID,
+ 0,
+ DDI_START_PHY_LANE,
+ DDI_END_PHY_LANE,
+ -1,
+ 0,
+ 0,
+ {
+ 1,
+ 1,
+ 1,
+ 1,
+ 1,
+ 0,
+ 1
+ },
+ },
+//------------------------------ GPP WRAPPER START-------------------------------------
+ //Port PBR4
+ {
+ {
+ DESCRIPTOR_PCIE_ENGINE,
+ offsetof (KB_COMPLEX_CONFIG, PortPBR4) - offsetof (KB_COMPLEX_CONFIG, GppWrapper),
+ offsetof (KB_COMPLEX_CONFIG, PortPBR3) - offsetof (KB_COMPLEX_CONFIG, PortPBR4),
+ 0
+ },
+ { PciePortEngine, GPP_START_PHY_LANE, GPP_END_PHY_LANE },
+ 0, //Initialization Status
+ 0xFF, //Scratch
+ {
+ {
+ {0},
+ 7,
+ 7,
+ PBR4_NATIVE_PCI_DEV,
+ PBR4_NATIVE_PCI_FUN,
+ PBR4_CORE_ID,
+ PBR4_PORT_ID,
+ {(UINT32)PBR4_PCI_ADDRESS},
+ LinkStateResetExit,
+ PBR4,
+ PBR4_UNIT_ID,
+ PBR4_NUM_UNIT_IDs
+ },
+ },
+ },
+ //Port PBR3
+ {
+ {
+ DESCRIPTOR_PCIE_ENGINE,
+ offsetof (KB_COMPLEX_CONFIG, PortPBR3) - offsetof (KB_COMPLEX_CONFIG, GppWrapper),
+ offsetof (KB_COMPLEX_CONFIG, PortPBR2) - offsetof (KB_COMPLEX_CONFIG, PortPBR3),
+ 0
+ },
+ { PciePortEngine, GPP_START_PHY_LANE, GPP_END_PHY_LANE },
+ 0, //Initialization Status
+ 0xFF, //Scratch
+ {
+ {
+ {0},
+ 6,
+ 6,
+ PBR3_NATIVE_PCI_DEV,
+ PBR3_NATIVE_PCI_FUN,
+ PBR3_CORE_ID,
+ PBR3_PORT_ID,
+ {(UINT32)PBR3_PCI_ADDRESS},
+ LinkStateResetExit,
+ PBR3,
+ PBR3_UNIT_ID,
+ PBR3_NUM_UNIT_IDs
+ },
+ },
+ },
+ //Port PBR2
+ {
+ {
+ DESCRIPTOR_PCIE_ENGINE,
+ offsetof (KB_COMPLEX_CONFIG, PortPBR2) - offsetof (KB_COMPLEX_CONFIG, GppWrapper),
+ offsetof (KB_COMPLEX_CONFIG, PortPBR1) - offsetof (KB_COMPLEX_CONFIG, PortPBR2),
+ 0
+ },
+ { PciePortEngine, GPP_START_PHY_LANE, GPP_END_PHY_LANE},
+ 0, //Initialization Status
+ 0xFF, //Scratch
+ {
+ {
+ {0},
+ 5,
+ 5,
+ PBR2_NATIVE_PCI_DEV,
+ PBR2_NATIVE_PCI_FUN,
+ PBR2_CORE_ID,
+ PBR2_PORT_ID,
+ {(UINT32)PBR2_PCI_ADDRESS},
+ LinkStateResetExit,
+ PBR2,
+ PBR2_UNIT_ID,
+ PBR2_NUM_UNIT_IDs
+ },
+ },
+ },
+ //Port PBR1
+ {
+ {
+ DESCRIPTOR_PCIE_ENGINE,
+ offsetof (KB_COMPLEX_CONFIG, PortPBR1) - offsetof (KB_COMPLEX_CONFIG, GppWrapper),
+ offsetof (KB_COMPLEX_CONFIG, PortPBR0) - offsetof (KB_COMPLEX_CONFIG, PortPBR1),
+ 0
+ },
+ { PciePortEngine, GPP_START_PHY_LANE, GPP_END_PHY_LANE },
+ 0, //Initialization Status
+ 0xFF, //Scratch
+ {
+ {
+ {0},
+ 4,
+ 4,
+ PBR1_NATIVE_PCI_DEV,
+ PBR1_NATIVE_PCI_FUN,
+ PBR1_CORE_ID,
+ PBR1_PORT_ID,
+ {(UINT32)PBR1_PCI_ADDRESS},
+ LinkStateResetExit,
+ PBR1,
+ PBR1_UNIT_ID,
+ PBR1_NUM_UNIT_IDs
+ },
+ },
+ },
+ //Port PBR0
+ {
+ {
+ DESCRIPTOR_PCIE_ENGINE | DESCRIPTOR_TERMINATE_LIST,
+ offsetof (KB_COMPLEX_CONFIG, PortPBR0) - offsetof (KB_COMPLEX_CONFIG, GppWrapper),
+ offsetof (KB_COMPLEX_CONFIG, Ddi1) - offsetof (KB_COMPLEX_CONFIG, PortPBR0),
+ 0
+ },
+ { PciePortEngine, GPP_START_PHY_LANE, GPP_END_PHY_LANE },
+ 0, //Initialization Status
+ 0xFF, //Scratch
+ {
+ {
+ {0},
+ 0,
+ 3,
+ PBR0_NATIVE_PCI_DEV,
+ PBR0_NATIVE_PCI_FUN,
+ PBR0_CORE_ID,
+ PBR0_PORT_ID,
+ {(UINT32)PBR0_PCI_ADDRESS},
+ LinkStateResetExit,
+ PBR0,
+ PBR0_UNIT_ID,
+ PBR0_NUM_UNIT_IDs
+ },
+ },
+ },
+//------------------------------ GPP WRAPPER END -------------------------------------
+//------------------------------ DDI WRAPPER START----------------------------------
+ //Ddi1
+ {
+ {
+ DESCRIPTOR_DDI_ENGINE | DESCRIPTOR_VIRTUAL,
+ offsetof (KB_COMPLEX_CONFIG, Ddi1) - offsetof (KB_COMPLEX_CONFIG, DdiWrapper),
+ offsetof (KB_COMPLEX_CONFIG, Ddi2) - offsetof (KB_COMPLEX_CONFIG, Ddi1),
+ 0
+ },
+ {PcieDdiEngine},
+ 0, //Initialization Status
+ 0xFF //Scratch
+ },
+ //Ddi2
+ {
+ {
+ DESCRIPTOR_DDI_ENGINE | DESCRIPTOR_VIRTUAL,
+ offsetof (KB_COMPLEX_CONFIG, Ddi2) - offsetof (KB_COMPLEX_CONFIG, DdiWrapper),
+ offsetof (KB_COMPLEX_CONFIG, Vga) - offsetof (KB_COMPLEX_CONFIG, Ddi2),
+ 0
+ },
+ {PcieDdiEngine},
+ 0, //Initialization Status
+ 0xFF //Scratch
+ },
+ //Vga
+ {
+ {
+ DESCRIPTOR_DDI_ENGINE | DESCRIPTOR_VIRTUAL | DESCRIPTOR_TERMINATE_LIST | DESCRIPTOR_TERMINATE_GNB | DESCRIPTOR_TERMINATE_TOPOLOGY,
+ offsetof (KB_COMPLEX_CONFIG, Vga) - offsetof (KB_COMPLEX_CONFIG, DdiWrapper),
+ 0,
+ 0
+ },
+ {PcieDdiEngine},
+ 0, //Initialization Status
+ 0xFF //Scratch
+ },
+ {
+ {0, 0, 0, 0, 0}
+ }
+};
+
+//
+// PCIe lane allocation GPP
+//
+UINT8 ROMDATA GppPortLaneConfigurationTableKB [] = {
+ UNUSED_LANE_ID, UNUSED_LANE_ID, UNUSED_LANE_ID, UNUSED_LANE_ID, UNUSED_LANE_ID, UNUSED_LANE_ID, 4, 7, 0, 3,
+ UNUSED_LANE_ID, UNUSED_LANE_ID, UNUSED_LANE_ID, UNUSED_LANE_ID, 6, 7, 4, 5, 0, 3,
+ UNUSED_LANE_ID, UNUSED_LANE_ID, 7, 7, 6, 6, 4, 5, 0, 3,
+ 7, 7, 6, 6, 5, 5, 4, 4, 0, 3
+};
+
+//
+// DDI lane allocation DDI
+//
+UINT8 ROMDATA DdiLaneConfigurationTableKB [] = {
+ 0, 3, 4, 7, 8, 11
+};
+
+//
+// PCIe lane allocation desfriptors
+//
+PCIe_LANE_ALLOC_DESCRIPTOR ROMDATA PcieLaneAllocConfigurationKB[] = {
+ {
+ 0,
+ GPP_WRAP_ID,
+ PciePortEngine,
+ NUMBER_OF_GPP_PORTS,
+ sizeof (GppPortLaneConfigurationTableKB) / (NUMBER_OF_GPP_PORTS * 2),
+ &GppPortLaneConfigurationTableKB[0]
+ },
+ {
+ DESCRIPTOR_TERMINATE_LIST,
+ DDI_WRAP_ID,
+ PcieDdiEngine,
+ NUMBER_OF_DDI_DDIS,
+ sizeof (DdiLaneConfigurationTableKB) / (NUMBER_OF_DDI_DDIS * 2),
+ &DdiLaneConfigurationTableKB[0]
+ }
+};
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get length of data block for complex
+ *
+ *
+ *
+ * @param[in] SocketId Socket ID.
+ * @param[out] Length Length of configuration info block
+ * @param[out] StdHeader Standard configuration header
+ * @retval AGESA_SUCCESS Configuration data length is correct
+ */
+AGESA_STATUS
+PcieGetComplexDataLengthKB (
+ IN UINT8 SocketId,
+ OUT UINTN *Length,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *Length = sizeof (KB_COMPLEX_CONFIG);
+ return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Build configuration
+ *
+ *
+ *
+ * @param[in] SocketId Socket ID.
+ * @param[out] Buffer Pointer to buffer to build internal complex data structure
+ * @param[out] StdHeader Standard configuration header.
+ * @retval AGESA_SUCCESS Configuration data build successfully
+ */
+AGESA_STATUS
+PcieBuildComplexConfigurationKB (
+ IN UINT8 SocketId,
+ OUT VOID *Buffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ LibAmdMemCopy (Buffer, &ComplexDataKB, sizeof (KB_COMPLEX_CONFIG), StdHeader);
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * get native PHY lane bitmap
+ *
+ *
+ * @param[in] PhyLaneBitmap Package PHY lane bitmap
+ * @param[in] Engine Standard configuration header.
+ * @retval Native PHY lane bitmap
+ */
+UINT32
+PcieGetNativePhyLaneBitmapKB (
+ IN UINT32 PhyLaneBitmap,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+
+ return PhyLaneBitmap;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieComplexDataKB.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieComplexDataKB.h
new file mode 100644
index 0000000..6663031
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieComplexDataKB.h
@@ -0,0 +1,157 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Family specific PCIe definitions
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIECOMPLEXDATAKB_H_
+#define _PCIECOMPLEXDATAKB_H_
+
+#define MAX_NUM_PHYs 2
+#define MAX_NUM_LANE_PER_PHY 8
+
+#define NUMBER_OF_GPP_PORTS 5
+#define NUMBER_OF_DDI_DDIS 3
+
+#define NON_INITIALIZED_PCI_ADDRESS 0
+
+#define GPP_WRAP_ID 0
+#define GPP_START_PHY_LANE 0
+#define GPP_END_PHY_LANE 7
+#define GPP_CORE_ID 0
+#define GPP_NUMBER_OF_PIFs 1
+
+#define DDI_WRAP_ID 3
+#define DDI_START_PHY_LANE 8
+#define DDI_END_PHY_LANE 19
+#define DDI_NUMBER_OF_PIFs 1
+
+// PBR0
+#define PBR0 0
+#define PBR0_NATIVE_PCI_DEV 2
+#define PBR0_NATIVE_PCI_FUN 1
+#define PBR0_CORE_ID GPP_CORE_ID
+#define PBR0_PORT_ID 0
+#define PBR0_PCI_ADDRESS NON_INITIALIZED_PCI_ADDRESS
+#define PBR0_UNIT_ID 0x4
+#define PBR0_NUM_UNIT_IDs 0x1
+
+// PBR1
+#define PBR1 1
+#define PBR1_NATIVE_PCI_DEV 2
+#define PBR1_NATIVE_PCI_FUN 2
+#define PBR1_CORE_ID GPP_CORE_ID
+#define PBR1_PORT_ID 1
+#define PBR1_PCI_ADDRESS NON_INITIALIZED_PCI_ADDRESS
+#define PBR1_UNIT_ID 0x5
+#define PBR1_NUM_UNIT_IDs 0x1
+
+// PBR2
+#define PBR2 2
+#define PBR2_NATIVE_PCI_DEV 2
+#define PBR2_NATIVE_PCI_FUN 3
+#define PBR2_CORE_ID GPP_CORE_ID
+#define PBR2_PORT_ID 2
+#define PBR2_PCI_ADDRESS NON_INITIALIZED_PCI_ADDRESS
+#define PBR2_UNIT_ID 0x6
+#define PBR2_NUM_UNIT_IDs 0x1
+
+// PBR3
+#define PBR3 3
+#define PBR3_NATIVE_PCI_DEV 2
+#define PBR3_NATIVE_PCI_FUN 4
+#define PBR3_CORE_ID GPP_CORE_ID
+#define PBR3_PORT_ID 3
+#define PBR3_PCI_ADDRESS NON_INITIALIZED_PCI_ADDRESS
+#define PBR3_UNIT_ID 0x7
+#define PBR3_NUM_UNIT_IDs 0x1
+
+// PBR4
+#define PBR4 4
+#define PBR4_NATIVE_PCI_DEV 2
+#define PBR4_NATIVE_PCI_FUN 5
+#define PBR4_CORE_ID GPP_CORE_ID
+#define PBR4_PORT_ID 4
+#define PBR4_PCI_ADDRESS NON_INITIALIZED_PCI_ADDRESS
+#define PBR4_UNIT_ID 0x8
+#define PBR4_NUM_UNIT_IDs 0x1
+
+#define MaxDevNum 4
+#define MaxDevFunc 5
+
+#define GPP_CORE_x4x4 ((4ull << 8) | (4ull << 0))
+#define GPP_CORE_x4x2x2 ((2ull << 16) | (2ull << 8) | (4ull << 0))
+#define GPP_CORE_x4x2x1x1 ((1ull << 24) | (1ull << 16) | (2ull << 8) | (4ull << 0))
+#define GPP_CORE_x4x1x1x1x1 ((1ull << 32) | (1ull << 24) | (1ull << 16) | (1ull << 8) | (4ull << 0))
+
+///Family specific silicon configuration
+typedef struct {
+ UINT8 PortDevMap [5]; ///< Device number that has beed allocated already
+} KB_PCIe_SILICON_CONFIG;
+
+
+/// Complex Configuration for silicon module
+typedef struct {
+ PCIe_SILICON_CONFIG Silicon; ///< Silicon
+
+ PCIe_WRAPPER_CONFIG GppWrapper; ///< GPP Wrapper
+ PCIe_WRAPPER_CONFIG DdiWrapper; ///< DDI Wrapper
+
+ // GPP
+ PCIe_ENGINE_CONFIG PortPBR4; ///< Port PBR6
+ PCIe_ENGINE_CONFIG PortPBR3; ///< Port PBR5
+ PCIe_ENGINE_CONFIG PortPBR2; ///< Port PBR4
+ PCIe_ENGINE_CONFIG PortPBR1; ///< Port PBR3
+ PCIe_ENGINE_CONFIG PortPBR0; ///< Port PBR2
+
+ // DDI
+ PCIe_ENGINE_CONFIG Ddi1; ///< Ddi1
+ PCIe_ENGINE_CONFIG Ddi2; ///< Ddi2
+ PCIe_ENGINE_CONFIG Vga; ///< Vga
+ KB_PCIe_SILICON_CONFIG FmSilicon; ///< Fm silicon config
+} KB_COMPLEX_CONFIG;
+
+
+VOID
+PcieSetPortPciAddressMapKB (
+ IN PCIe_SILICON_CONFIG *Silicon
+ );
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieConfigKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieConfigKB.c
new file mode 100644
index 0000000..bc87dde
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieConfigKB.c
@@ -0,0 +1,626 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Family specific PCIe wrapper configuration services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbRegistersKB.h"
+#include "GnbRegisterAccKB.h"
+#include "PcieComplexDataKB.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_PCIECONFIGKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define DEVFUNC(d, f) ((((UINT8) d) << 3) | ((UINT8) f))
+
+extern PCIe_LANE_ALLOC_DESCRIPTOR ROMDATA PcieLaneAllocConfigurationKB[];
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+CONST CHAR8*
+PcieDebugGetCoreConfigurationStringKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT8 ConfigurationValue
+ );
+
+CONST CHAR8*
+PcieDebugGetHostRegAddressSpaceStringKB (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN UINT16 AddressFrame
+ );
+
+BOOLEAN
+PcieCheckPortPcieLaneCanBeMuxedKB (
+ IN PCIe_PORT_DESCRIPTOR *PortDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+AGESA_STATUS
+PcieMapPortPciAddressKB (
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+CONST CHAR8*
+PcieDebugGetWrapperNameStringKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ );
+
+AGESA_STATUS
+PcieConfigureEnginesLaneAllocationKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIE_ENGINE_TYPE EngineType,
+ IN UINT8 ConfigurationId
+ );
+
+AGESA_STATUS
+PcieGetCoreConfigurationValueKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT8 CoreId,
+ IN UINT64 ConfigurationSignature,
+ IN UINT8 *ConfigurationValue
+ );
+
+BOOLEAN
+PcieCheckPortPciDeviceMappingKB (
+ IN PCIe_PORT_DESCRIPTOR *PortDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+AGESA_STATUS
+PcieGetSbConfigInfoKB (
+ IN UINT8 SocketId,
+ OUT PCIe_PORT_DESCRIPTOR *SbPort,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+//
+// Default port dev map
+//
+UINT8 ROMDATA DefaultPortDevMap [] = {
+ DEVFUNC (2, 1),
+ DEVFUNC (2, 2),
+ DEVFUNC (2, 3),
+ DEVFUNC (2, 4),
+ DEVFUNC (2, 5)
+};
+
+//
+// Default apic config
+//
+APIC_DEVICE_INFO ROMDATA DefaultIoapicConfig [] = {
+ {0, 0, 0x18},
+ {1, 0, 0x19},
+ {2, 0, 0x1A},
+ {3, 0, 0x1B},
+ {4, 0, 0x18}
+};
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Configure engine list to support lane allocation according to configuration ID.
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] PcieLaneConfig Lane configuration descriptor
+ * @param[in] ConfigurationId Configuration ID
+ * @retval AGESA_SUCCESS Configuration successfully applied
+ * @retval AGESA_ERROR Requested configuration not supported
+ */
+STATIC AGESA_STATUS
+PcieConfigurePcieEnginesLaneAllocation (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_LANE_ALLOC_DESCRIPTOR *PcieLaneConfig,
+ IN UINT8 ConfigurationId
+ )
+{
+ UINT8 CoreLaneIndex;
+ PCIe_ENGINE_CONFIG *EnginesList;
+
+ if (ConfigurationId >= PcieLaneConfig->NumberOfConfigurations) {
+ return AGESA_ERROR;
+ }
+ EnginesList = PcieConfigGetChildEngine (Wrapper);
+ CoreLaneIndex = ConfigurationId * PcieLaneConfig->NumberOfEngines * 2;
+
+ while (EnginesList != NULL) {
+ if (PcieLibIsPcieEngine (EnginesList)) {
+ PcieConfigResetDescriptorFlags (EnginesList, DESCRIPTOR_ALLOCATED);
+ EnginesList->Type.Port.StartCoreLane = PcieLaneConfig->ConfigTable[CoreLaneIndex++];
+ EnginesList->Type.Port.EndCoreLane = PcieLaneConfig->ConfigTable[CoreLaneIndex++];
+ }
+ EnginesList = PcieLibGetNextDescriptor (EnginesList);
+ }
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Configure engine list to support lane allocation according to configuration ID.
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] DdiLaneConfig Lane configuration descriptor
+ * @param[in] ConfigurationId Configuration ID
+ * @retval AGESA_SUCCESS Configuration successfully applied
+ * @retval AGESA_ERROR Requested configuration not supported
+ */
+STATIC AGESA_STATUS
+PcieConfigureDdiEnginesLaneAllocation (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_LANE_ALLOC_DESCRIPTOR *DdiLaneConfig,
+ IN UINT8 ConfigurationId
+ )
+{
+ UINTN LaneIndex;
+ PCIe_ENGINE_CONFIG *EnginesList;
+ if (ConfigurationId >= DdiLaneConfig->NumberOfConfigurations) {
+ return AGESA_ERROR;
+ }
+ LaneIndex = ConfigurationId * DdiLaneConfig->NumberOfEngines * 2;
+ EnginesList = PcieConfigGetChildEngine (Wrapper);
+ while (EnginesList != NULL) {
+ if (PcieLibIsDdiEngine (EnginesList)) {
+ PcieConfigResetDescriptorFlags (EnginesList, DESCRIPTOR_ALLOCATED);
+ EnginesList->EngineData.StartLane = DdiLaneConfig->ConfigTable[LaneIndex++] + Wrapper->StartPhyLane;
+ EnginesList->EngineData.EndLane = DdiLaneConfig->ConfigTable[LaneIndex++] + Wrapper->StartPhyLane;
+ }
+ EnginesList = PcieLibGetNextDescriptor (EnginesList);
+ }
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Configure engine list to support lane allocation according to configuration ID.
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] EngineType Engine Type
+ * @param[in] ConfigurationId Configuration ID
+ * @retval AGESA_SUCCESS Configuration successfully applied
+ * @retval AGESA_ERROR Requested configuration not supported
+ */
+AGESA_STATUS
+PcieConfigureEnginesLaneAllocationKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIE_ENGINE_TYPE EngineType,
+ IN UINT8 ConfigurationId
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_LANE_ALLOC_DESCRIPTOR *LaneConfigDescriptor;
+
+ Status = AGESA_ERROR;
+ LaneConfigDescriptor = PcieLaneAllocConfigurationKB;
+ while (LaneConfigDescriptor != NULL) {
+ if (LaneConfigDescriptor->WrapId == Wrapper->WrapId && LaneConfigDescriptor->EngineType == EngineType) {
+ switch (EngineType) {
+ case PciePortEngine:
+ Status = PcieConfigurePcieEnginesLaneAllocation (Wrapper, LaneConfigDescriptor, ConfigurationId);
+ break;
+ case PcieDdiEngine:
+ Status = PcieConfigureDdiEnginesLaneAllocation (Wrapper, LaneConfigDescriptor, ConfigurationId);
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ break;
+ }
+ LaneConfigDescriptor = PcieConfigGetNextDataDescriptor (LaneConfigDescriptor);
+ }
+ return Status;
+}
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get core configuration value
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to internal configuration data area
+ * @param[in] CoreId Core ID
+ * @param[in] ConfigurationSignature Configuration signature
+ * @param[out] ConfigurationValue Configuration value (for core configuration)
+ * @retval AGESA_SUCCESS Configuration successfully applied
+ * @retval AGESA_ERROR Core configuration value can not be determined
+ */
+AGESA_STATUS
+PcieGetCoreConfigurationValueKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT8 CoreId,
+ IN UINT64 ConfigurationSignature,
+ IN UINT8 *ConfigurationValue
+ )
+{
+ AGESA_STATUS Status;
+ Status = AGESA_SUCCESS;
+ switch (ConfigurationSignature) {
+ case GPP_CORE_x4x1x1x1x1:
+ *ConfigurationValue = 0x4;
+ break;
+ case GPP_CORE_x4x2x1x1:
+ *ConfigurationValue = 0x3;
+ break;
+ case GPP_CORE_x4x2x2:
+ *ConfigurationValue = 0x2;
+ break;
+ case GPP_CORE_x4x4:
+ *ConfigurationValue = 0x1;
+ break;
+ default:
+ IDS_HDT_CONSOLE (PCIE_MISC, "ERROR!!![%s Wrapper] Unknown core config signature 0x%08x%08x\n",
+ PcieDebugGetWrapperNameStringKB (Wrapper),
+ ((UINT32 *) &ConfigurationSignature)[1],
+ ((UINT32 *) &ConfigurationSignature)[0]
+ );
+ ASSERT (FALSE);
+ Status = AGESA_ERROR;
+ }
+ return Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if engine can be remapped to Device/function number requested by user
+ * defined engine descriptor
+ *
+ * Function only called if requested device/function does not much native device/function
+ *
+ * @param[in] PortDescriptor Pointer to user defined engine descriptor
+ * @param[in] Engine Pointer engine configuration
+ * @retval TRUE Descriptor can be mapped to engine
+ * @retval FALSE Descriptor can NOT be mapped to engine
+ */
+
+BOOLEAN
+PcieCheckPortPciDeviceMappingKB (
+ IN PCIe_PORT_DESCRIPTOR *PortDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ UINT8 DevFunc;
+ UINT8 Index;
+ DevFunc = DEVFUNC (PortDescriptor->Port.DeviceNumber, PortDescriptor->Port.FunctionNumber);
+ if (DevFunc == 0) {
+ return TRUE;
+ }
+ for (Index = 0; Index < (sizeof (DefaultPortDevMap) / sizeof (DefaultPortDevMap[0])); Index++) {
+ if (DefaultPortDevMap[Index] == DevFunc) {
+ return TRUE;
+ }
+ }
+ return FALSE;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get core configuration string
+ *
+ * Debug function for logging configuration
+ *
+ * @param[in] Wrapper Pointer to internal configuration data area
+ * @param[in] ConfigurationValue Configuration value
+ * @retval Configuration string
+ */
+
+CONST CHAR8*
+PcieDebugGetCoreConfigurationStringKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT8 ConfigurationValue
+ )
+{
+ switch (ConfigurationValue) {
+ case 0x4:
+ return "4:1:1:1:1";
+ case 0x3:
+ return "4:2:1:1";
+ case 0x2:
+ return "4:2:2";
+ case 0x1:
+ return "4:4";
+ default:
+ break;
+ }
+ return " !!! Something Wrong !!!";
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get wrapper name
+ *
+ * Debug function for logging wrapper name
+ *
+ * @param[in] Wrapper Pointer to internal configuration data area
+ * @retval Wrapper Name string
+ */
+
+CONST CHAR8*
+PcieDebugGetWrapperNameStringKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ )
+{
+ switch (Wrapper->WrapId) {
+ case GPP_WRAP_ID:
+ return "GPP";
+ case DDI_WRAP_ID:
+ return "Virtual DDI";
+ default:
+ break;
+ }
+ return " !!! Something Wrong !!!";
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get register address name
+ *
+ * Debug function for logging register trace
+ *
+ * @param[in] Silicon Silicon config descriptor
+ * @param[in] AddressFrame Address Frame
+ * @retval Register address name
+ */
+CONST CHAR8*
+PcieDebugGetHostRegAddressSpaceStringKB (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN UINT16 AddressFrame
+ )
+{
+ switch (AddressFrame) {
+ case 0x130:
+ return "GPP WRAP";
+ case 0x110:
+ return "GPP PIF0";
+ case 0x120:
+ return "GPP PHY0";
+ case 0x140:
+ return "GPP CORE";
+ default:
+ break;
+ }
+ return " !!! Something Wrong !!!";
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if the lane can be muxed by link width requested by user
+ * defined engine descriptor
+ *
+ * Check Engine StartCoreLane could be aligned by user requested link width(x1, x2, x4, x8, x16).
+ * Check Engine StartCoreLane could be aligned by user requested link width x2.
+ *
+ * @param[in] PortDescriptor Pointer to user defined engine descriptor
+ * @param[in] Engine Pointer engine configuration
+ * @retval TRUE Lane can be muxed
+ * @retval FALSE Lane can NOT be muxed
+ */
+
+BOOLEAN
+PcieCheckPortPcieLaneCanBeMuxedKB (
+ IN PCIe_PORT_DESCRIPTOR *PortDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ UINT16 DescriptorHiLane;
+ UINT16 DescriptorLoLane;
+ UINT16 DescriptorNumberOfLanes;
+ PCIe_WRAPPER_CONFIG *Wrapper;
+ UINT16 NormalizedLoPhyLane;
+ BOOLEAN Result;
+
+ Result = FALSE;
+ Wrapper = PcieConfigGetParentWrapper (Engine);
+ DescriptorLoLane = MIN (PortDescriptor->EngineData.StartLane, PortDescriptor->EngineData.EndLane);
+ DescriptorHiLane = MAX (PortDescriptor->EngineData.StartLane, PortDescriptor->EngineData.EndLane);
+ DescriptorNumberOfLanes = DescriptorHiLane - DescriptorLoLane + 1;
+
+ NormalizedLoPhyLane = DescriptorLoLane - Wrapper->StartPhyLane;
+
+ if (NormalizedLoPhyLane == Engine->Type.Port.StartCoreLane) {
+ Result = TRUE;
+ } else {
+ if (NormalizedLoPhyLane == 0) {
+ Result = TRUE;
+ } else {
+ if ((NormalizedLoPhyLane % DescriptorNumberOfLanes) == 0) {
+ Result = TRUE;
+ }
+ }
+ }
+ return Result;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Map engine to specific PCI device address
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine configuration
+ * @retval AGESA_ERROR Fail to map PCI device address
+ * @retval AGESA_SUCCESS Successfully allocate PCI address
+ */
+
+AGESA_STATUS
+PcieMapPortPciAddressKB (
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ AGESA_STATUS Status;
+ KB_COMPLEX_CONFIG *ComplexConfig;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ UINT8 DevFunc;
+ UINT8 Index;
+ Status = AGESA_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMapPortPciAddressKB Enter\n");
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Engine->Header);
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Complex->Header);
+ if (Engine->Type.Port.PortData.DeviceNumber == 0 && Engine->Type.Port.PortData.FunctionNumber == 0) {
+ Engine->Type.Port.PortData.DeviceNumber = Engine->Type.Port.NativeDevNumber;
+ Engine->Type.Port.PortData.FunctionNumber = Engine->Type.Port.NativeFunNumber;
+ }
+ ComplexConfig = (KB_COMPLEX_CONFIG *) PcieConfigGetParentSilicon (Engine);
+ IDS_OPTION_HOOK (IDS_GNB_PCIE_PORT_REMAP, &Engine->Type.Port, GnbLibGetHeader (Pcie));
+ DevFunc = (Engine->Type.Port.PortData.DeviceNumber << 3) | Engine->Type.Port.PortData.FunctionNumber;
+ for (Index = 0; Index < sizeof (ComplexConfig->FmSilicon.PortDevMap); ++Index) {
+ if (ComplexConfig->FmSilicon.PortDevMap[Index] == DevFunc) {
+ Status = AGESA_ERROR;
+ break;
+ }
+ }
+ if (Status == AGESA_SUCCESS) {
+ ComplexConfig->FmSilicon.PortDevMap[Engine->Type.Port.PcieBridgeId] = DevFunc;
+ }
+ for (Index = 0; Index < sizeof (DefaultPortDevMap); ++Index) {
+ if (DevFunc == DefaultPortDevMap[Index]) {
+ Engine->Type.Port.LogicalBridgeId = Index;
+ // Get the configuration from the table or from "auto settings"
+ if (Engine->Type.Port.PortData.ApicDeviceInfo.GroupMap == 0x00) {
+ // If Group is 0, use "Auto" settings
+ Engine->Type.Port.PortData.ApicDeviceInfo = DefaultIoapicConfig[Index];
+ }
+ break;
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMapPortPciAddressKB Exit [0x%x]\n", Status);
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Map engine to specific PCI device address
+ *
+ *
+ * @param[in] Silicon Silicon config descriptor
+ */
+
+VOID
+PcieSetPortPciAddressMapKB (
+ IN PCIe_SILICON_CONFIG *Silicon
+ )
+{
+ UINT8 Index;
+ UINT8 DevFuncIndex;
+ UINT8 PortDevMap [sizeof (DefaultPortDevMap)];
+ PCIe_PLATFORM_CONFIG *Pcie;
+ D0F0x64_x30_STRUCT D0F0x64_x30;
+
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Silicon->Header);
+ LibAmdMemCopy (&PortDevMap[0], &DefaultPortDevMap[0], sizeof (DefaultPortDevMap), GnbLibGetHeader (Pcie));
+ for (Index = 0; Index < sizeof (((KB_COMPLEX_CONFIG *) Silicon)->FmSilicon.PortDevMap); ++Index) {
+ if (((KB_COMPLEX_CONFIG *) Silicon)->FmSilicon.PortDevMap[Index] != 0) {
+ for (DevFuncIndex = 0; DevFuncIndex < sizeof (((KB_COMPLEX_CONFIG *) Silicon)->FmSilicon.PortDevMap); ++DevFuncIndex) {
+ if (PortDevMap[DevFuncIndex] == ((KB_COMPLEX_CONFIG *) Silicon)->FmSilicon.PortDevMap[Index]) {
+ PortDevMap[DevFuncIndex] = 0;
+ break;
+ }
+ }
+ }
+ }
+ for (Index = 0; Index < sizeof (((KB_COMPLEX_CONFIG *) Silicon)->FmSilicon.PortDevMap); ++Index) {
+ if (((KB_COMPLEX_CONFIG *) Silicon)->FmSilicon.PortDevMap[Index] == 0) {
+ for (DevFuncIndex = 0; DevFuncIndex < sizeof (((KB_COMPLEX_CONFIG *) Silicon)->FmSilicon.PortDevMap); ++DevFuncIndex) {
+ if (PortDevMap[DevFuncIndex] != 0) {
+ ((KB_COMPLEX_CONFIG *) Silicon)->FmSilicon.PortDevMap[Index] = PortDevMap[DevFuncIndex];
+ PortDevMap[DevFuncIndex] = 0;
+ break;
+ }
+ }
+ }
+ GnbRegisterReadKB ((GNB_HANDLE *) Silicon, D0F0x64_x30_TYPE, D0F0x64_x30_ADDRESS + Index, &D0F0x64_x30.Value, 0, GnbLibGetHeader (Pcie));
+ D0F0x64_x30.Field.DevFnMap = ((KB_COMPLEX_CONFIG *) Silicon)->FmSilicon.PortDevMap[Index];
+ GnbRegisterWriteKB ((GNB_HANDLE *) Silicon, D0F0x64_x30_TYPE, D0F0x64_x30_ADDRESS + Index, &D0F0x64_x30.Value, 0, GnbLibGetHeader (Pcie));
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Build default SB configuration descriptor
+ *
+ *
+ * @param[in] SocketId Socket Id
+ * @param[out] SbPort Pointer to SB configuration descriptor
+ * @param[in] StdHeader Standard configuration header.
+ * @retval AGESA_SUCCESS Configuration data build successfully
+ */
+AGESA_STATUS
+PcieGetSbConfigInfoKB (
+ IN UINT8 SocketId,
+ OUT PCIe_PORT_DESCRIPTOR *SbPort,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieEarlyInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieEarlyInitKB.c
new file mode 100644
index 0000000..2199796
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieEarlyInitKB.c
@@ -0,0 +1,938 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe early post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 87701 $ @e \$Date: 2013-02-07 12:58:51 -0600 (Thu, 07 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbUra.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieTrainingV2.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbPcieInitLibV4.h"
+#include "GnbPcieInitLibV5.h"
+#include "PcieLibKB.h"
+#include "PcieComplexDataKB.h"
+#include "GnbRegistersKB.h"
+#include "GnbRegisterAccKB.h"
+#include "OptionGnb.h"
+#include "GnbSmuInitLibV7.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_PCIEEARLYINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+extern BUILD_OPT_CFG UserOptions;
+extern CONST PCIE_HOST_REGISTER_TABLE_HEADER ROMDATA PcieInitEarlyTableKB;
+extern CONST PCIE_HOST_REGISTER_TABLE_HEADER ROMDATA CoreInitTableKB;
+extern CONST PCIE_PORT_REGISTER_TABLE_HEADER ROMDATA PortInitEarlyTableKB;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+PcieEarlyInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set port device/function mapping
+ *
+ *
+ *
+ * @param[in] Descriptor Silicon descriptor
+ * @param[in] Buffer Pointer to buffer
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+STATIC AGESA_STATUS
+PciePortMapInitCallbackKB (
+ IN PCIe_DESCRIPTOR_HEADER *Descriptor,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PcieSetPortPciAddressMapKB ((PCIe_SILICON_CONFIG *) Descriptor);
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Static init for various registers.
+ *
+ *
+ *
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+STATIC
+PcieEarlyStaticInitKB (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINTN Index;
+
+ for (Index = 0; Index < PcieInitEarlyTableKB.Length; Index++) {
+ GnbLibPciIndirectRMW (
+ MAKE_SBDFO (0,0,0,0, D0F0xE0_ADDRESS),
+ PcieInitEarlyTableKB.Table[Index].Reg,
+ AccessS3SaveWidth32,
+ (UINT32)~PcieInitEarlyTableKB.Table[Index].Mask,
+ PcieInitEarlyTableKB.Table[Index].Data,
+ GnbLibGetHeader (Pcie)
+ );
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init core registers.
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper configuration descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+STATIC
+PcieEarlyCoreInitKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 CoreId;
+ UINTN Index;
+ if (PcieLibIsPcieWrapper (Wrapper)) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieEarlyCoreInitKB Enter\n");
+ for (CoreId = Wrapper->StartPcieCoreId; CoreId <= Wrapper->EndPcieCoreId; CoreId++) {
+ for (Index = 0; Index < CoreInitTableKB.Length; Index++) {
+ UINT32 Value;
+ Value = PcieRegisterRead (
+ Wrapper,
+ CORE_SPACE (CoreId, CoreInitTableKB.Table[Index].Reg),
+ Pcie
+ );
+ Value &= (~CoreInitTableKB.Table[Index].Mask);
+ Value |= CoreInitTableKB.Table[Index].Data;
+ PcieRegisterWrite (
+ Wrapper,
+ CORE_SPACE (CoreId, CoreInitTableKB.Table[Index].Reg),
+ Value,
+ FALSE,
+ Pcie
+ );
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieEarlyCoreInitKB Exit\n");
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set Pcie Phy Isolation
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper configuration descriptor
+ * @param[in] Pcie Pointer to PCIe configuration data area
+ */
+VOID
+STATIC
+PciePhyIsolationKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 ActiveLaneBitmap;
+ UINT32 PhyRxIsoDis;
+ D0F0xE4_WRAP_8013_STRUCT D0F0xE4_WRAP_8013;
+ UINT32 D0F0xE4_WRAP_8021;
+ UINT32 D0F0xE4_WRAP_8022;
+ UINT32 D0F0xE4_WRAP_8025;
+ UINT32 D0F0xE4_WRAP_8026;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePhyIsolationKB Enter\n");
+
+ // Apply lane mux
+ D0F0xE4_WRAP_8021 = 0x07060504;
+ D0F0xE4_WRAP_8022 = 0x03020100;
+ D0F0xE4_WRAP_8025 = 0x07060504;
+ D0F0xE4_WRAP_8026 = 0x03020100;
+
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8021_ADDRESS),
+ D0F0xE4_WRAP_8021,
+ FALSE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8022_ADDRESS),
+ D0F0xE4_WRAP_8022,
+ FALSE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8025_ADDRESS),
+ D0F0xE4_WRAP_8025,
+ FALSE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8026_ADDRESS),
+ D0F0xE4_WRAP_8026,
+ FALSE,
+ Pcie
+ );
+
+ PhyRxIsoDis = GnbBuildOptions.CfgPciePhyIsolationEnable ? 0 : 3;
+ ActiveLaneBitmap = PcieUtilGetWrapperLaneBitMap (LANE_TYPE_PCIE_PHY_NATIVE_ALLOC_ACTIVE, 0, Wrapper);
+ if ((ActiveLaneBitmap & 0xF0) != 0) {
+ PhyRxIsoDis = 3;
+ }
+
+ IDS_OPTION_HOOK (IDS_GNB_PCIE_PHY_ISOLATION, &PhyRxIsoDis, GnbLibGetHeader (Pcie));
+
+ D0F0xE4_WRAP_8013.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8013_ADDRESS),
+ Pcie
+ );
+ D0F0xE4_WRAP_8013.Field.PhyRxIsoDis = 3;
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8013_ADDRESS),
+ D0F0xE4_WRAP_8013.Value,
+ FALSE,
+ Pcie
+ );
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePhyIsolationKB Exit\n");
+}
+
+UINT8 LaneMuxSelectorArrayKB[] = { 7, 6, 5, 4, 3, 2, 1, 0 };
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Locate mux array index
+ *
+ *
+ *
+ * @param[in, out] LaneMuxSelectorArrayPtr Pointer to mux selector array
+ * @param[in] LaneMuxValue The value that match to array
+ * @retval Index Index successfully mapped
+ */
+STATIC UINT8
+PcieTopologyLocateMuxIndexKB (
+ IN OUT UINT8 *LaneMuxSelectorArrayPtr,
+ IN UINT8 LaneMuxValue
+ )
+{
+ UINT8 Index;
+ for (Index = 0; Index < sizeof (LaneMuxSelectorArrayKB); Index++ ) {
+ if (LaneMuxSelectorArrayPtr [Index] == LaneMuxValue) {
+ return Index;
+ }
+ }
+ return 0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Apply lane mux
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+STATIC VOID
+PcieTopologyApplyLaneMuxKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ UINT32 Index;
+ UINT8 RxLaneMuxSelectorArray [sizeof (LaneMuxSelectorArrayKB)];
+ UINT8 TxLaneMuxSelectorArray [sizeof (LaneMuxSelectorArrayKB)];
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyApplyLaneMuxKB Enter\n");
+ if (PcieLibIsPcieWrapper (Wrapper)) {
+ LibAmdMemCopy (
+ &TxLaneMuxSelectorArray[0],
+ &LaneMuxSelectorArrayKB[0],
+ sizeof (LaneMuxSelectorArrayKB),
+ GnbLibGetHeader (Pcie)
+ );
+ LibAmdMemCopy (
+ &RxLaneMuxSelectorArray[0],
+ &LaneMuxSelectorArrayKB[0],
+ sizeof (LaneMuxSelectorArrayKB),
+ GnbLibGetHeader (Pcie)
+ );
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ while (EngineList != NULL) {
+ if (PcieLibIsPcieEngine (EngineList) && PcieLibIsEngineAllocated (EngineList)) {
+ UINT32 CoreLaneBitmap;
+ UINT32 PifLaneBitmap;
+ UINT8 CurrentCoreLane;
+ UINT8 CurrentPifLane;
+
+ CoreLaneBitmap = PcieUtilGetEngineLaneBitMap (LANE_TYPE_PCIE_CORE_ALLOC, 0, EngineList);
+ PifLaneBitmap = PcieUtilGetEngineLaneBitMap (LANE_TYPE_PCIE_PHY_NATIVE, 0, EngineList);
+
+ while (CoreLaneBitmap != 0) {
+ CurrentCoreLane = LibAmdBitScanForward (CoreLaneBitmap);
+ CurrentPifLane = LibAmdBitScanForward (PifLaneBitmap);
+
+ if (TxLaneMuxSelectorArray[CurrentPifLane] != CurrentCoreLane) {
+ TxLaneMuxSelectorArray[PcieTopologyLocateMuxIndexKB (TxLaneMuxSelectorArray, CurrentCoreLane)] = TxLaneMuxSelectorArray[CurrentPifLane];
+ TxLaneMuxSelectorArray[CurrentPifLane] = CurrentCoreLane;
+ }
+
+ if (RxLaneMuxSelectorArray[CurrentCoreLane] != CurrentPifLane) {
+ RxLaneMuxSelectorArray[PcieTopologyLocateMuxIndexKB (RxLaneMuxSelectorArray, CurrentPifLane)] = RxLaneMuxSelectorArray[CurrentCoreLane];
+ RxLaneMuxSelectorArray[CurrentCoreLane] = CurrentPifLane;
+ }
+
+ CoreLaneBitmap &= (~ (1 << CurrentCoreLane));
+ PifLaneBitmap &= (~ (1 << CurrentPifLane));
+ }
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+ for (Index = 0; Index < 2; ++Index) {
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8021_ADDRESS + Index),
+ ((UINT32 *) TxLaneMuxSelectorArray) [Index],
+ FALSE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8025_ADDRESS + Index),
+ ((UINT32 *) RxLaneMuxSelectorArray) [Index],
+ FALSE,
+ Pcie
+ );
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyApplyLaneMuxKB Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Execute/clean up reconfiguration
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+STATIC VOID
+PcieTopologyExecuteReconfigKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ D0F0xE4_WRAP_8062_STRUCT D0F0xE4_WRAP_8062;
+ PCIe_SILICON_CONFIG *Silicon;
+ DEV_OBJECT DevObject;
+
+ if (PcieLibIsPcieWrapper (Wrapper)) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyExecuteReconfigKB Enter\n");
+
+ D0F0xE4_WRAP_8062.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
+ Pcie
+ );
+ D0F0xE4_WRAP_8062.Field.ReconfigureEn = 0x1;
+ D0F0xE4_WRAP_8062.Field.ResetPeriod = 0x2;
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
+ D0F0xE4_WRAP_8062.Value,
+ FALSE,
+ Pcie
+ );
+
+ Silicon = PcieConfigGetParentSilicon (Wrapper);
+
+ GnbLibPciIndirectRMW (
+ Silicon->Address.AddressValue | D0F0xB8_ADDRESS,
+ 0x3f81c,
+ AccessWidth32,
+ (UINT32) ~0xff00,
+ Wrapper->WrapId << 8,
+ GnbLibGetHeader (Pcie)
+ );
+
+ DevObject.StdHeader = GnbLibGetHeader (Pcie);
+ DevObject.GnbHandle = GnbGetHandle (GnbLibGetHeader (Pcie));
+ DevObject.DevPciAddress.AddressValue = Silicon->Address.AddressValue;
+ GnbSmuServiceRequestV7 (
+ &DevObject,
+ 25, //SMC_MSG_RECONFIGURE,
+ 0,
+ 0
+ );
+
+ D0F0xE4_WRAP_8062.Field.ConfigXferMode = 0x1;
+ D0F0xE4_WRAP_8062.Field.ReconfigureEn = 0x0;
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
+ D0F0xE4_WRAP_8062.Value,
+ FALSE,
+ Pcie
+ );
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyExecuteReconfigKB Exit\n");
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Apply Misc settings for given wrapper
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to Wrapper config descriptor
+ * @param[in] Pcie Pointer to PICe configuration data area
+ */
+STATIC VOID
+PcieMiscInitKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ D0F0xE4_WRAP_8011_STRUCT D0F0xE4_WRAP_8011;
+ GnbRegistersKB4915_STRUCT GnbRegistersKB4915;
+ GnbRegistersKB4940_STRUCT GnbRegistersKB4940;
+ GnbRegistersKB4965_STRUCT GnbRegistersKB4965;
+ GnbRegistersKB4990_STRUCT GnbRegistersKB4990;
+ GnbRegistersKB5015_STRUCT GnbRegistersKB5015;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMiscInitKB Enter\n");
+ D0F0xE4_WRAP_8011.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8011_ADDRESS),
+ Pcie
+ );
+
+ D0F0xE4_WRAP_8011.Field.Bitfield_23_23 = 0;
+
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8011_ADDRESS),
+ D0F0xE4_WRAP_8011.Value,
+ TRUE,
+ Pcie
+ );
+
+ GnbRegistersKB4915.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x805),
+ Pcie
+ );
+
+ GnbRegistersKB4940.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x905),
+ Pcie
+ );
+
+ GnbRegistersKB4965.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x0A05),
+ Pcie
+ );
+ GnbRegistersKB4990.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x0B05),
+ Pcie
+ );
+
+ GnbRegistersKB5015.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x0C05),
+ Pcie
+ );
+
+ GnbRegistersKB4915.Field.bit_31_24 = 0x40;
+ GnbRegistersKB4940.Field.bit_31_24 = 0x40;
+ GnbRegistersKB4965.Field.bit_31_24 = 0x40;
+ GnbRegistersKB4990.Field.bit_31_24 = 0x40;
+ GnbRegistersKB5015.Field.bit_31_24 = 0x40;
+
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x805),
+ GnbRegistersKB4915.Value,
+ TRUE,
+ Pcie
+ );
+
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x905),
+ GnbRegistersKB4940.Value,
+ TRUE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x0A05),
+ GnbRegistersKB4965.Value,
+ TRUE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x0B05),
+ GnbRegistersKB4990.Value,
+ TRUE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x0C05),
+ GnbRegistersKB5015.Value,
+ TRUE,
+ Pcie
+ );
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMiscInitKB Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Switch to PCIe Native Gen1 PLL.
+ *
+ *
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+AGESA_STATUS
+STATIC
+PcieNativeGen1PLLSwitchKB (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIE_LINK_SPEED_CAP GlobalSpeedCap;
+ UINT32 ParamValue;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieNativeGen1PLLSwitchKB Enter\n");
+
+ GlobalSpeedCap = PcieUtilGlobalGenCapability (
+ PCIE_PORT_GEN_CAP_MAX | PCIE_GLOBAL_GEN_CAP_TRAINED_PORTS | PCIE_GLOBAL_GEN_CAP_HOTPLUG_PORTS,
+ Pcie
+ );
+
+ ParamValue = 0;
+ if (GlobalSpeedCap == PcieGen1) {
+ GnbRegisterWriteKB (GnbGetHandle (GnbLibGetHeader (Pcie)), TYPE_SMU_MSG, 87, &ParamValue, 0, GnbLibGetHeader (Pcie));
+ }
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieNativeGen1PLLSwitchKB Exit\n");
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Per wrapper Pcie Init prior training.
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper configuration descriptor
+ * @param[in] Buffer Pointer buffer
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+AGESA_STATUS
+STATIC
+PcieEarlyInitCallbackKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS Status;
+ BOOLEAN CoreConfigChanged;
+ BOOLEAN PllConfigChanged;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieEarlyInitCallbackKB Enter\n");
+ CoreConfigChanged = FALSE;
+ PllConfigChanged = FALSE;
+ IDS_OPTION_HOOK (IDS_BEFORE_RECONFIGURATION, Pcie, GnbLibGetHeader (Pcie));
+ PcieTopologyPrepareForReconfig (Wrapper, Pcie);
+ Status = PcieTopologySetCoreConfig (Wrapper, &CoreConfigChanged, Pcie);
+ ASSERT (Status == AGESA_SUCCESS);
+ PciePhyIsolationKB (Wrapper, Pcie);
+ PcieTopologyApplyLaneMuxKB (Wrapper, Pcie);
+ PciePifSetRxDetectPowerMode (Wrapper, Pcie);
+ PciePifSetLs2ExitTimeV5 (Wrapper, Pcie);
+ PciePifApplyGanging (Wrapper, Pcie);
+ PcieTopologySelectMasterPllKB (Wrapper, &PllConfigChanged, Pcie);
+ PcieMiscInitKB (Wrapper, Pcie);
+ PcieTopologyExecuteReconfigKB (Wrapper, Pcie);
+ PcieTopologyCleanUpReconfig (Wrapper, Pcie);
+ PcieTopologySetLinkReversalV4 (Wrapper, Pcie);
+ PciePifPllConfigureKB (Wrapper, Pcie);
+ PcieTopologyLaneControlV5 (
+ DisableLanes,
+ PcieUtilGetWrapperLaneBitMap (LANE_TYPE_CORE_ALL, LANE_TYPE_PCIE_CORE_ALLOC, Wrapper),
+ Wrapper,
+ Pcie
+ );
+
+ PciePollPifForCompeletion (Wrapper, Pcie);
+ PcieEarlyCoreInitKB (Wrapper, Pcie);
+ PcieSetSsidV4 (UserOptions.CfgGnbPcieSSID, Wrapper, Pcie);
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieEarlyInitCallbackKB Exit [%x]\n", Status);
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Pcie Init
+ *
+ *
+ *
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_SUCCESS Topology successfully mapped
+ * @retval AGESA_ERROR Topology can not be mapped
+ */
+
+AGESA_STATUS
+STATIC
+PcieEarlyInitKB (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ BOOLEAN NativeGen1PLL;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieEarlyInitKB Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+ NativeGen1PLL = GnbBuildOptions.CfgNativeGen1PLL;
+
+ Status = PcieConfigRunProcForAllDescriptors (DESCRIPTOR_SILICON, 0, DESCRIPTOR_TERMINATE_TOPOLOGY, PciePortMapInitCallbackKB, NULL, Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ IDS_OPTION_HOOK (IDS_GNB_PMM_NATIVEGEN1PLL, &NativeGen1PLL, GnbLibGetHeader (Pcie));
+
+ if (NativeGen1PLL == TRUE) {
+ Status = PcieNativeGen1PLLSwitchKB (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ }
+
+ Status = PcieConfigRunProcForAllWrappers (DESCRIPTOR_ALL_WRAPPERS, PcieEarlyInitCallbackKB, NULL, Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ PcieEarlyStaticInitKB (Pcie);
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieEarlyInitKB Exit [%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set misc slot capability
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+PcieLinkSetSlotCapKB (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 IntPin;
+ PCIe_WRAPPER_CONFIG *Wrapper;
+
+ GnbLibPciRMW (
+ Engine->Type.Port.Address.AddressValue | DxF0x58_ADDRESS,
+ AccessWidth32,
+ 0xffffffff,
+ 1 << DxF0x58_SlotImplemented_OFFSET,
+ GnbLibGetHeader (Pcie)
+ );
+
+ if (Engine->Type.Port.Address.Address.Function < 5) {
+ IntPin = Engine->Type.Port.Address.Address.Function;
+ } else {
+ IntPin = Engine->Type.Port.Address.Address.Function - 4;
+ }
+
+ GnbLibPciRMW (
+ Engine->Type.Port.Address.AddressValue | DxF0x3C_ADDRESS,
+ AccessWidth32,
+ 0xffffffff,
+ IntPin << DxF0x3C_IntPin_OFFSET,
+ GnbLibGetHeader (Pcie)
+ );
+
+ // Set MaxPayload straps for port
+ if (Engine->EngineData.StartLane == Engine->EngineData.EndLane) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "Set MaxPayload strap for StartLane = %d and EndLane = %d\n", Engine->EngineData.StartLane, Engine->EngineData.EndLane);
+ Wrapper = PcieConfigGetParentWrapper (Engine);
+ PcieRegisterRMW (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x804 + (Engine->Type.Port.PortId) * 0x100),
+ 0xe,
+ MAX_PAYLOAD_256 << 1,
+ FALSE,
+ Pcie
+ );
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Callback to init various features on all active ports
+ *
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Not used
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PcieEarlyPortInitCallbackKB (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieEarlyPortInitCallbackKB Enter\n");
+ ASSERT (Engine->EngineData.EngineType == PciePortEngine);
+ PciePortProgramRegisterTable (PortInitEarlyTableKB.Table, PortInitEarlyTableKB.Length, Engine, FALSE, Pcie);
+ PcieSetLinkSpeedCapV4 (PcieGen1, Engine, Pcie);
+ PcieSetLinkWidthCap (Engine, Pcie);
+ PcieCompletionTimeout (Engine, Pcie);
+ PcieLinkSetSlotCapKB (Engine, Pcie);
+ PcieLinkInitHotplugV5 (Engine, Pcie);
+ PciePhyChannelCharacteristicV5 (Engine, Pcie);
+ if (Engine->Type.Port.PortData.PortPresent == PortDisabled ||
+ (Engine->Type.Port.PortData.EndpointStatus == EndpointNotPresent &&
+ Engine->Type.Port.PortData.LinkHotplug != HotplugEnhanced &&
+ Engine->Type.Port.PortData.LinkHotplug != HotplugServer)) {
+ ASSERT (!PcieConfigIsSbPcieEngine (Engine));
+ //
+ // Pass endpoint status in scratch
+ //
+ PciePortRegisterRMW (
+ Engine,
+ 0x1,
+ 0x1,
+ 0x1,
+ FALSE,
+ Pcie
+ );
+ PcieTrainingSetPortState (Engine, LinkStateDeviceNotPresent, FALSE, Pcie);
+ }
+ if (PcieConfigIsSbPcieEngine (Engine)) {
+ PcieTrainingSetPortState (Engine, LinkStateTrainingSuccess, FALSE, Pcie);
+ }
+ if (Engine->Type.Port.PortData.MiscControls.LinkComplianceMode == 0x1) {
+ PcieTrainingSetPortState (Engine, LinkStateTrainingCompleted, FALSE, Pcie);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieEarlyPortInitCallbackKB Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Callback to init various features on all active ports
+ *
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Not used
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+DdiEarlyPortInitCallbackKB (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 GMMx6464;
+ UINT32 GMMx5C6C;
+ UINT32 GMMx5C90;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "DdiEarlyPortInitCallbackKB Enter\n");
+ if ((Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeEDP) ||
+ (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeDpToLvds) ||
+ (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeEDPToLvds) ||
+ (Engine->Type.Ddi.DdiData.ConnectorType == ConnectorTypeEDPToLvdsSwInit)) {
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "Found eDP/LVDS Connector\n");
+
+ GnbRegisterReadKB (GnbGetHandle (GnbLibGetHeader (Pcie)), 0x12, 0x6464, &GMMx6464, 0, GnbLibGetHeader (Pcie));
+ GnbRegisterReadKB (GnbGetHandle (GnbLibGetHeader (Pcie)), 0x12, 0x5c90, &GMMx5C90, 0, GnbLibGetHeader (Pcie));
+ GnbRegisterReadKB (GnbGetHandle (GnbLibGetHeader (Pcie)), 0x12, 0x5c6c, &GMMx5C6C, 0, GnbLibGetHeader (Pcie));
+ GMMx6464 |= 1;
+ GMMx6464 |= 1 << 4;
+ GMMx6464 |= 1 << 25;
+ GMMx5C90 &= ~0x3f00; GMMx5C90 |= 1 << 8;
+ GMMx5C6C &= ~0x1800; GMMx5C6C |= 1 << 13;
+ GnbRegisterWriteKB (GnbGetHandle (GnbLibGetHeader (Pcie)), 0x12, 0x6464, &GMMx6464, 0, GnbLibGetHeader (Pcie));
+ GnbRegisterWriteKB (GnbGetHandle (GnbLibGetHeader (Pcie)), 0x12, 0x5c90, &GMMx5C90, 0, GnbLibGetHeader (Pcie));
+ GnbRegisterWriteKB (GnbGetHandle (GnbLibGetHeader (Pcie)), 0x12, 0x5c6c, &GMMx5C6C, 0, GnbLibGetHeader (Pcie));
+ }
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "DdiEarlyPortInitCallbackKB Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Master procedure to init various features on all active ports
+ *
+ *
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_STATUS
+ *
+ */
+AGESA_STATUS
+STATIC
+PcieEarlyPortInitKB (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS Status;
+ Status = AGESA_SUCCESS;
+ // Leave all device in Presence Detect Presence state for distributed training will be completed at PciePortPostEarlyInit
+ if (Pcie->TrainingAlgorithm == PcieTrainingDistributed) {
+ Pcie->TrainingExitState = LinkStateResetExit;
+ }
+
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_PCIE_ENGINE,
+ PcieEarlyPortInitCallbackKB,
+ NULL,
+ Pcie
+ );
+
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_DDI_ENGINE | DESCRIPTOR_VIRTUAL,
+ DdiEarlyPortInitCallbackKB,
+ NULL,
+ Pcie
+ );
+
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PCIe Early Post Init
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+PcieEarlyInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ AgesaStatus = AGESA_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieEarlyInterfaceKB Enter\n");
+ Status = PcieLocateConfigurationData (StdHeader, &Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_SUCCESS) {
+ PciePortsVisibilityControlV5 (UnhidePorts, Pcie);
+
+ Status = PcieEarlyInitKB (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ Status = PcieEarlyPortInitKB (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ Status = PcieTraining (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ IDS_OPTION_CALLOUT (IDS_CALLOUT_GNB_PCIE_PHY_CONFIG, Pcie, StdHeader);
+ PciePortsVisibilityControlV5 (HidePorts, Pcie);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieEarlyInterfaceKB Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieEnvInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieEnvInitKB.c
new file mode 100644
index 0000000..9656f26d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieEnvInitKB.c
@@ -0,0 +1,94 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe env post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "S3SaveState.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_PCIEENVINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+PcieEnvInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PCIe Env Init
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+AGESA_STATUS
+PcieEnvInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ S3_SAVE_DISPATCH (StdHeader, PcieLateRestoreKBS3Script_ID, 0, NULL);
+ return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieLibKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieLibKB.c
new file mode 100644
index 0000000..61b0725
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieLibKB.c
@@ -0,0 +1,463 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * KB specific PCIe services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 87645 $ @e \$Date: 2013-02-06 13:08:17 -0600 (Wed, 06 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbSbLib.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbPcieInitLibV5.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieTrainingV2.h"
+#include "GnbNbInitLibV4.h"
+#include "GnbNbInitLibV1.h"
+#include "GnbNbInitLibV5.h"
+#include "PcieComplexDataKB.h"
+#include "PcieLibKB.h"
+#include "GnbRegistersKB.h"
+#include "GnbRegisterAccKB.h"
+#include "GnbF1Table.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_PCIELIBKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+PCIE_LINK_SPEED_CAP
+PcieGetLinkSpeedCapKB (
+ IN UINT32 Flags,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+UINT32
+GnbTimeStampKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+PcieMaxPayloadKB (
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PLL powerdown
+ *
+ *
+ * @param[in] Wrapper Pointer to Wrapper config descriptor
+ * @param[in] Pcie Pointer to PICe configuration data area
+ */
+
+VOID
+PciePifPllConfigureKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ D0F0xE4_PIF_0012_STRUCT D0F0xE4_PIF_0012;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifPllConfigureKB Enter\n");
+ D0F0xE4_PIF_0012.Value = PcieRegisterRead (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, 0, D0F0xE4_PIF_0012_ADDRESS),
+ Pcie
+ );
+
+ D0F0xE4_PIF_0012.Field.PllRampUpTime = 0x0;
+
+ if (Wrapper->Features.PowerOffUnusedPlls != 0) {
+ D0F0xE4_PIF_0012.Field.PllPowerStateInOff = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.PllPowerStateInTxs2 = PifPowerStateOff;
+ } else {
+ D0F0xE4_PIF_0012.Field.PllPowerStateInOff = PifPowerStateL0;
+ D0F0xE4_PIF_0012.Field.PllPowerStateInTxs2 = PifPowerStateL0;
+ }
+
+ if (Wrapper->Features.PllOffInL1 != 0) {
+ D0F0xE4_PIF_0012.Field.TxPowerStateInTxs2 = PifPowerStateLS2;
+ D0F0xE4_PIF_0012.Field.RxPowerStateInRxs2 = PifPowerStateLS2;
+ } else {
+ D0F0xE4_PIF_0012.Field.TxPowerStateInTxs2 = PifPowerStateL0;
+ D0F0xE4_PIF_0012.Field.RxPowerStateInRxs2 = PifPowerStateL0;
+ }
+
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, 0, D0F0xE4_PIF_0012_ADDRESS),
+ D0F0xE4_PIF_0012.Value,
+ TRUE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, 0, D0F0xE4_PIF_0012_ADDRESS + 1),
+ D0F0xE4_PIF_0012.Value,
+ TRUE,
+ Pcie
+ );
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifPllConfigureKB Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Power down unused lanes and plls
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PciePwrPowerDownUnusedLanesKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 UnusedLanes;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePwrPowerDownUnusedLanesKB Enter\n");
+ if (Wrapper->Features.PowerOffUnusedLanes != 0) {
+ UnusedLanes = PcieUtilGetWrapperLaneBitMap (LANE_TYPE_CORE_ALL, LANE_TYPE_PCIE_CORE_ALLOC_ACTIVE, Wrapper);
+ PcieTopologyLaneControlV5 (
+ DisableLanes,
+ UnusedLanes,
+ Wrapper,
+ Pcie
+ );
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePwrPowerDownUnusedLanesKB Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Request boot up voltage
+ *
+ *
+ *
+ * @param[in] LinkCap Global GEN capability
+ * @param[in] Pcie Pointer to PCIe configuration data area
+ */
+VOID
+PcieSetVoltageKB (
+ IN PCIE_LINK_SPEED_CAP LinkCap,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 TargetVid;
+ UINT8 MinVidIndex;
+ UINT8 PP_FUSE_ARRAY_V2_fld32[5];
+ UINT8 Index;
+ PP_F1_ARRAY_V2 *PpF1Array;
+ UINT32 Millivolt;
+ UINT32 D0F0xBC_xC0104007;
+ UINT32 D0F0xBC_xC0104008;
+ UINT32 D0F0xBC_xC010407C;
+ UINT32 D0F0xBC_xC0107064;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieSetVoltageKB Enter\n");
+ PpF1Array = GnbLocateHeapBuffer (AMD_PP_F1_TABLE_HANDLE, GnbLibGetHeader (Pcie));
+ if (PpF1Array == NULL) {
+ GnbRegisterReadKB (GnbGetHandle (GnbLibGetHeader (Pcie)), 0x4, 0xC0104007, &D0F0xBC_xC0104007, 0, GnbLibGetHeader (Pcie));
+ GnbRegisterReadKB (GnbGetHandle (GnbLibGetHeader (Pcie)), 0x4, 0xC0104008, &D0F0xBC_xC0104008, 0, GnbLibGetHeader (Pcie));
+ GnbRegisterReadKB (GnbGetHandle (GnbLibGetHeader (Pcie)), 0x4, 0xC010407C, &D0F0xBC_xC010407C, 0, GnbLibGetHeader (Pcie));
+ GnbRegisterReadKB (GnbGetHandle (GnbLibGetHeader (Pcie)), 0x4, 0xC0107064, &D0F0xBC_xC0107064, 0, GnbLibGetHeader (Pcie));
+ PP_FUSE_ARRAY_V2_fld32[0] = (UINT8) ((D0F0xBC_xC0104007 >> 5) & 0xFF);
+ PP_FUSE_ARRAY_V2_fld32[1] = (UINT8) ((D0F0xBC_xC0104008 >> 5) & 0xFF);
+ PP_FUSE_ARRAY_V2_fld32[2] = (UINT8) ((D0F0xBC_xC0104008 >> 13) & 0xFF);
+ PP_FUSE_ARRAY_V2_fld32[3] = (UINT8) ((D0F0xBC_xC0104008 >> 21) & 0xFF);
+ PP_FUSE_ARRAY_V2_fld32[4] = (UINT8) ((D0F0xBC_xC010407C >> 20) & 0xFF);
+ Index = (UINT8) ((D0F0xBC_xC0107064 >> 11) & 7);
+ } else {
+ PP_FUSE_ARRAY_V2_fld32[0] = PpF1Array->PP_FUSE_ARRAY_V2_fld32[0];
+ PP_FUSE_ARRAY_V2_fld32[1] = PpF1Array->PP_FUSE_ARRAY_V2_fld32[1];
+ PP_FUSE_ARRAY_V2_fld32[2] = PpF1Array->PP_FUSE_ARRAY_V2_fld32[2];
+ PP_FUSE_ARRAY_V2_fld32[3] = PpF1Array->PP_FUSE_ARRAY_V2_fld32[3];
+ PP_FUSE_ARRAY_V2_fld32[4] = PpF1Array->PP_FUSE_ARRAY_V2_fld32[4];
+ Index = PpF1Array->PcieGen2Vid;
+ }
+ if (LinkCap > PcieGen1) {
+ ASSERT (PP_FUSE_ARRAY_V2_fld32[Index] != 0);
+ TargetVid = PP_FUSE_ARRAY_V2_fld32[Index];
+ } else {
+
+ MinVidIndex = 0;
+ for (Index = 0; Index < 5; Index++) {
+ if (PP_FUSE_ARRAY_V2_fld32[Index] > PP_FUSE_ARRAY_V2_fld32[MinVidIndex]) {
+ MinVidIndex = (UINT8) Index;
+ }
+ }
+ ASSERT (PP_FUSE_ARRAY_V2_fld32[MinVidIndex] != 0);
+ TargetVid = PP_FUSE_ARRAY_V2_fld32[MinVidIndex];
+ }
+
+ IDS_HDT_CONSOLE (PCIE_MISC, " Set Voltage for Gen %d, Vid code %d\n", LinkCap, TargetVid);
+ Millivolt = GnbTranslateVidCodeToMillivoltV5 (TargetVid, GnbLibGetHeader (Pcie)) * 4 / 100;
+ GnbRegisterWriteKB (GnbGetHandle (GnbLibGetHeader (Pcie)), TYPE_SMU_MSG, SMC_MSG_VDDNB_REQUEST, &Millivolt, 0, GnbLibGetHeader (Pcie));
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieSetVoltageKB Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PLL power up latency
+ *
+ *
+ * @param[in] Wrapper Pointer to Wrapper config descriptor
+ * @param[in] Pcie Pointer to PICe configuration data area
+ * @retval Pll wake up latency in us
+ */
+UINT8
+PciePifGetPllPowerUpLatencyKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ return 35;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get max link speed capability supported by this port
+ *
+ *
+ *
+ * @param[in] Flags See Flags PCIE_PORT_GEN_CAP_BOOT / PCIE_PORT_GEN_CAP_MAX
+ * @param[in] Engine Pointer to engine config descriptor
+ * @retval PcieGen1/PcieGen2 Max supported link gen capability
+ */
+PCIE_LINK_SPEED_CAP
+PcieGetLinkSpeedCapKB (
+ IN UINT32 Flags,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ PCIE_LINK_SPEED_CAP LinkSpeedCapability;
+ PCIe_WRAPPER_CONFIG *Wrapper;
+ PCIe_PLATFORM_CONFIG *Pcie;
+
+ Wrapper = PcieConfigGetParentWrapper (Engine);
+ Pcie = PcieConfigGetPlatform (Wrapper);
+
+ LinkSpeedCapability = PcieGen2;
+
+ if (Engine->Type.Port.PortData.LinkSpeedCapability == PcieGenMaxSupported) {
+ Engine->Type.Port.PortData.LinkSpeedCapability = (UINT8) LinkSpeedCapability;
+ }
+ if (Pcie->PsppPolicy == PsppPowerSaving) {
+ LinkSpeedCapability = PcieGen1;
+ }
+ if (Engine->Type.Port.PortData.LinkSpeedCapability < LinkSpeedCapability) {
+ LinkSpeedCapability = Engine->Type.Port.PortData.LinkSpeedCapability;
+ }
+ if ((Flags & PCIE_PORT_GEN_CAP_BOOT) != 0) {
+
+ if (( Pcie->PsppPolicy == PsppBalanceLow ||
+ Engine->Type.Port.PortData.MiscControls.LinkSafeMode == PcieGen1)
+ && !PcieConfigIsSbPcieEngine (Engine)) {
+
+ LinkSpeedCapability = PcieGen1;
+ }
+ }
+ return LinkSpeedCapability;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Family specific time stamp function
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval Count
+ */
+UINT32
+GnbTimeStampKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 TimeStamp;
+
+ TimeStamp = 0;
+
+ GnbLibPciIndirectRead (
+ MAKE_SBDFO (0, 0, 0, 0, 0xE0),
+ 0x13080F0,
+ AccessWidth32,
+ &TimeStamp,
+ StdHeader
+ );
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbTsKb: %08x\n", TimeStamp);
+ return TimeStamp;
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Limit MaxPayload to 256 for x1 ports
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @retval MaxPayload MaxPayloadSupport
+ */
+UINT8
+PcieMaxPayloadKB (
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ UINT8 MaxPayload;
+
+ MaxPayload = MAX_PAYLOAD_512;
+ if (Engine->EngineData.StartLane == Engine->EngineData.EndLane) {
+ MaxPayload = MAX_PAYLOAD_256;
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMaxPayloadKB Exit with MaxPayload = %d for StartLane = %d and EndLane = %d\n", MaxPayload, Engine->EngineData.StartLane, Engine->EngineData.EndLane);
+ return MaxPayload;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Select master PLL
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[out] ConfigChanged Pointer to boolean indicator that configuration was changed
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PcieTopologySelectMasterPllKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ OUT BOOLEAN *ConfigChanged,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ UINT16 MasterLane;
+ UINT16 MasterHotplugLane;
+ UINT16 EngineMasterLane;
+ D0F0xE4_WRAP_8013_STRUCT D0F0xE4_WRAP_8013;
+ D0F0xE4_WRAP_8013_STRUCT D0F0xE4_WRAP_8013_BASE;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologySelectMasterPll Enter\n");
+ MasterLane = 0xFFFF;
+ MasterHotplugLane = 0xFFFF;
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ while (EngineList != NULL) {
+ if (PcieConfigIsEngineAllocated (EngineList) && EngineList->Type.Port.PortData.PortPresent != PortDisabled && PcieConfigIsPcieEngine (EngineList)) {
+ EngineMasterLane = PcieConfigGetPcieEngineMasterLane (EngineList);
+ if (EngineList->Type.Port.PortData.LinkHotplug != HotplugDisabled) {
+ MasterHotplugLane = (EngineMasterLane < MasterHotplugLane) ? EngineMasterLane : MasterHotplugLane;
+ } else {
+ MasterLane = (EngineMasterLane < MasterLane) ? EngineMasterLane : MasterLane;
+ if (PcieConfigIsSbPcieEngine (EngineList)) {
+ break;
+ }
+ }
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+
+ if (MasterLane == 0xffff) {
+ if (MasterHotplugLane != 0xffff) {
+ MasterLane = MasterHotplugLane;
+ } else {
+ MasterLane = 0x0;
+ }
+ }
+
+ D0F0xE4_WRAP_8013.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8013_ADDRESS),
+ Pcie
+ );
+ D0F0xE4_WRAP_8013_BASE.Value = D0F0xE4_WRAP_8013.Value;
+
+ if (MasterLane <= 3 ) {
+ Wrapper->MasterPll = GNB_PCIE_MASTERPLL_A;
+ } else {
+ Wrapper->MasterPll = GNB_PCIE_MASTERPLL_B;
+ }
+
+ IDS_OPTION_HOOK (IDS_GNB_PCIE_MASTERPLL_SELECTION, &(Wrapper->MasterPll), GnbLibGetHeader (Pcie));
+
+ if (Wrapper->MasterPll == GNB_PCIE_MASTERPLL_A) {
+ D0F0xE4_WRAP_8013.Field.MasterPciePllA = 0x1;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllB = 0x0;
+ } else {
+ D0F0xE4_WRAP_8013.Field.MasterPciePllA = 0x0;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllB = 0x1;
+ }
+
+ if (ConfigChanged != NULL) {
+ *ConfigChanged = (D0F0xE4_WRAP_8013.Value == D0F0xE4_WRAP_8013_BASE.Value) ? FALSE : TRUE;
+ }
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8013_ADDRESS),
+ D0F0xE4_WRAP_8013.Value,
+ FALSE,
+ Pcie
+ );
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologySelectMasterPll Exit\n");
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieLibKB.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieLibKB.h
new file mode 100644
index 0000000..0434b78
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieLibKB.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * KB specific PCIe configuration data services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84519 $ @e \$Date: 2012-12-17 11:20:40 -0600 (Mon, 17 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIELIBKB_H_
+#define _PCIELIBKB_H_
+
+VOID
+PciePifPllConfigureKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePwrPowerDownUnusedLanesKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieSetVoltageKB (
+ IN PCIE_LINK_SPEED_CAP LinkCap,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+UINT8
+PciePifGetPllPowerUpLatencyKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologySelectMasterPllKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ OUT BOOLEAN *ConfigChanged,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieMidInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieMidInitKB.c
new file mode 100644
index 0000000..ef07647
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieMidInitKB.c
@@ -0,0 +1,392 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe mid post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 88079 $ @e \$Date: 2013-02-15 15:28:53 -0600 (Fri, 15 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbPcieInitLibV4.h"
+#include "GnbPcieInitLibV5.h"
+#include "GnbFamServices.h"
+#include "PcieLibKB.h"
+#include "PciePortServicesV4.h"
+#include "GnbRegistersKB.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_PCIEMIDINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern CONST PCIE_PORT_REGISTER_TABLE_HEADER ROMDATA PortInitMidTableKB;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+PcieMidInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Callback to init various features on all active ports
+ *
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Not used
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PcieMidPortInitCallbackKB (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PciePortProgramRegisterTable (PortInitMidTableKB.Table, PortInitMidTableKB.Length, Engine, TRUE, Pcie);
+ if (PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_TRAINING_SUCCESS) || Engine->Type.Port.PortData.LinkHotplug != HotplugDisabled) {
+ PcieEnableSlotPowerLimitV5 (Engine, Pcie);
+ }
+ // If StartLane == 4/7 and EndLane == 7/4, this is GFX port
+ if (!(((Engine->EngineData.StartLane == 4) && (Engine->EngineData.EndLane == 7)) ||
+ ((Engine->EngineData.StartLane == 7) && (Engine->EngineData.EndLane == 4)))) {
+ // For GPP ports only set STRAP_MED_yTSx_COUNT=2
+ PciePortRegisterRMW (
+ Engine,
+ 0xC0,
+ 0x30,
+ 0x2 << 4,
+ TRUE,
+ Pcie
+ );
+ }
+ PcieEnableAspm (Engine, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Master procedure to init various features on all active ports
+ *
+ *
+ *
+ *
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_STATUS
+ *
+ */
+
+AGESA_STATUS
+STATIC
+PcieMidPortInitKB (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS Status;
+ PCIE_LINK_SPEED_CAP GlobalSpeedCap;
+ Status = AGESA_SUCCESS;
+
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_PCIE_ENGINE,
+ PcieMidPortInitCallbackKB,
+ NULL,
+ Pcie
+ );
+
+ GlobalSpeedCap = PcieUtilGlobalGenCapability (
+ PCIE_PORT_GEN_CAP_BOOT | PCIE_GLOBAL_GEN_CAP_TRAINED_PORTS | PCIE_GLOBAL_GEN_CAP_HOTPLUG_PORTS,
+ Pcie
+ );
+
+
+ PcieSetVoltageKB (GlobalSpeedCap, Pcie);
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Clock gating
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+STATIC VOID
+PciePwrClockGatingKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ D0F0xE4_WRAP_8011_STRUCT D0F0xE4_WRAP_8011;
+ D0F0xE4_WRAP_8012_STRUCT D0F0xE4_WRAP_8012;
+ D0F0xE4_WRAP_8014_STRUCT D0F0xE4_WRAP_8014;
+ D0F0xE4_WRAP_8015_STRUCT D0F0xE4_WRAP_8015;
+ D0F0xE4_WRAP_8016_STRUCT D0F0xE4_WRAP_8016;
+ UINT8 CoreId;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePwrClockGatingKB Enter\n");
+ D0F0xE4_WRAP_8014.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8014_ADDRESS),
+ Pcie
+ );
+ D0F0xE4_WRAP_8015.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8015_ADDRESS),
+ Pcie
+ );
+
+ D0F0xE4_WRAP_8012.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8012_ADDRESS),
+ Pcie
+ );
+
+ D0F0xE4_WRAP_8011.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8011_ADDRESS),
+ Pcie
+ );
+
+ if (Wrapper->Features.ClkGating == 0x1) {
+ D0F0xE4_WRAP_8011.Field.TxclkPermGateLatency = 0;
+ D0F0xE4_WRAP_8011.Field.Reserved_16_16 = 0x1;
+ D0F0xE4_WRAP_8011.Field.TxclkPermGateEven = 0x1;
+ D0F0xE4_WRAP_8011.Field.TxclkPermStop = 0;
+ D0F0xE4_WRAP_8011.Field.TxclkDynGateEnable = 0x1;
+ D0F0xE4_WRAP_8011.Field.TxclkDynGateLatency = 0;
+ D0F0xE4_WRAP_8011.Field.TxclkRegsGateEnable = 0x1;
+ D0F0xE4_WRAP_8011.Field.TxclkRegsGateLatency = 0;
+ D0F0xE4_WRAP_8011.Field.TxclkLcntGateEnable = 0x1;
+
+ D0F0xE4_WRAP_8012.Field.Pif1xIdleResumeLatency = 0x7;
+ D0F0xE4_WRAP_8012.Field.Pif1xIdleGateEnable = 0x1;
+ D0F0xE4_WRAP_8012.Field.Pif1xIdleGateLatency = 0;
+
+ D0F0xE4_WRAP_8014.Field.TxclkPermGateEnable = 0x1;
+ D0F0xE4_WRAP_8014.Field.TxclkPrbsGateEnable = 0x1;
+ D0F0xE4_WRAP_8014.Field.PcieGatePifA1xEnable = 0x1;
+ D0F0xE4_WRAP_8014.Field.PcieGatePifB1xEnable = 0x1;
+
+ }
+
+ if (Wrapper->Features.TxclkGatingPllPowerDown == 0x1) {
+ D0F0xE4_WRAP_8014.Field.TxclkPermGateOnlyWhenPllPwrDn = 0x1;
+ }
+
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8014_ADDRESS),
+ D0F0xE4_WRAP_8014.Value,
+ TRUE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8015_ADDRESS),
+ D0F0xE4_WRAP_8015.Value,
+ TRUE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8012_ADDRESS),
+ D0F0xE4_WRAP_8012.Value,
+ TRUE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8011_ADDRESS),
+ D0F0xE4_WRAP_8011.Value,
+ TRUE,
+ Pcie
+ );
+
+ for (CoreId = Wrapper->StartPcieCoreId; CoreId <= Wrapper->EndPcieCoreId; CoreId++) {
+ PcieRegisterWriteField (
+ Wrapper,
+ CORE_SPACE (CoreId, D0F0xE4_CORE_0011_ADDRESS),
+ D0F0xE4_CORE_0011_DynClkLatency_OFFSET,
+ D0F0xE4_CORE_0011_DynClkLatency_WIDTH,
+ 0xf,
+ TRUE,
+ Pcie
+ );
+ }
+
+ if (Wrapper->Features.LclkGating == 0x1) {
+ D0F0xE4_WRAP_8016.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8016_ADDRESS),
+ Pcie
+ );
+ D0F0xE4_WRAP_8016.Field.LclkDynGateEnable = 0x1;
+ D0F0xE4_WRAP_8016.Field.LclkGateFree = 0x1;
+ D0F0xE4_WRAP_8016.Field.LclkDynGateLatency = 0x3F;
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8016_ADDRESS),
+ D0F0xE4_WRAP_8016.Value,
+ TRUE,
+ Pcie
+ );
+ }
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePwrClockGatingKB Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Per wrapper Pcie Late Init.
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper configuration descriptor
+ * @param[in] Buffer Pointer buffer
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+AGESA_STATUS
+STATIC
+PcieMidInitCallbackKB (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PciePwrPowerDownUnusedLanesKB (Wrapper, Pcie);
+ PciePwrClockGatingKB (Wrapper, Pcie);
+ PcieLockRegisters (Wrapper, Pcie);
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Pcie Late Init
+ *
+ * Late PCIe initialization
+ *
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_SUCCESS Topology successfully mapped
+ * @retval AGESA_ERROR Topology can not be mapped
+ */
+
+AGESA_STATUS
+STATIC
+PcieMidInitKB (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS Status;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMidInitKB Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+
+ Status = PcieConfigRunProcForAllWrappers (DESCRIPTOR_ALL_WRAPPERS, PcieMidInitCallbackKB, NULL, Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMidInitKB Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PCIe Mid Init
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+AGESA_STATUS
+PcieMidInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS Status;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMidInterfaceKB Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+ Status = PcieLocateConfigurationData (StdHeader, &Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_SUCCESS) {
+ PciePortsVisibilityControlV5 (UnhidePorts, Pcie);
+
+ Status = PcieMidPortInitKB (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ Status = PcieMidInitKB (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ PciePortsVisibilityControlV5 (HidePorts, Pcie);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMidInterfaceKB Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PciePostInitKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PciePostInitKB.c
new file mode 100644
index 0000000..77fb825
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PciePostInitKB.c
@@ -0,0 +1,470 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe post initialization.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieTrainingV2.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbPcieInitLibV4.h"
+#include "GnbPcieInitLibV5.h"
+#include "PcieLibKB.h"
+#include "GnbRegistersKB.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBINITKB_PCIEPOSTINITKB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+PciePostEarlyInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+PciePostInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+PcieLateRestoreInitKBS3Script (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 ContextLength,
+ IN VOID* Context
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Callback to init various features on all ports
+ *
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Not used
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PciePostPortInitCallbackKB (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIE_LINK_SPEED_CAP LinkSpeedCapability;
+ ASSERT (Engine->EngineData.EngineType == PciePortEngine);
+ if (Engine->Type.Port.PortData.MiscControls.LinkSafeMode == PcieGen1) {
+ PcieLinkSafeMode (Engine, Pcie);
+ }
+ LinkSpeedCapability = PcieFmGetLinkSpeedCap (PCIE_PORT_GEN_CAP_BOOT, Engine);
+ PcieSetLinkSpeedCapV4 (LinkSpeedCapability, Engine, Pcie);
+ if (PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_TRAINING_SUCCESS) && (LinkSpeedCapability > PcieGen1) && !PcieConfigIsSbPcieEngine (Engine)) {
+ PcieTrainingSetPortState (Engine, LinkStateRetrain, FALSE, Pcie);
+ PcieConfigUpdatePortStatus (Engine, 0, INIT_STATUS_PCIE_TRAINING_SUCCESS);
+ }
+ if (Engine->Type.Port.PortData.MiscControls.LinkComplianceMode == 0x1) {
+ PcieForceCompliance (Engine, Pcie);
+ PcieTrainingSetPortState (Engine, LinkStateResetExit, FALSE, Pcie);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Callback to init various features on all ports
+ *
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Not used
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PciePostS3PortInitCallbackKB (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIE_LINK_SPEED_CAP LinkSpeedCapability;
+ PCIE_LINK_TRAINING_STATE State;
+
+ ASSERT (Engine->EngineData.EngineType == PciePortEngine);
+
+ LinkSpeedCapability = PcieFmGetLinkSpeedCap (PCIE_PORT_GEN_CAP_BOOT, Engine);
+ PcieSetLinkSpeedCapV4 (LinkSpeedCapability, Engine, Pcie);
+
+ if (Engine->Type.Port.PortData.MiscControls.LinkSafeMode == PcieGen1) {
+ PcieLinkSafeMode (Engine, Pcie);
+ }
+
+ if (!PcieConfigIsSbPcieEngine (Engine)) {
+ //
+ // General Port
+ //
+ State = LinkStateDeviceNotPresent;
+ if (Engine->Type.Port.PortData.LinkHotplug == HotplugDisabled || Engine->Type.Port.PortData.LinkHotplug == HotplugInboard) {
+ //
+ // Non hotplug device: we only check status from previous boot
+ //
+ if (PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_TRAINING_SUCCESS)) {
+ State = LinkStateResetExit;
+ }
+ } else {
+ UINT32 PcieScratch;
+ //
+ // Get endpoint staus from scratch
+ //
+ PcieScratch = PciePortRegisterRead (Engine, 0x1, Pcie);
+ //
+ // Hotplug device: we check ep status if reported
+ //
+ if ((PcieScratch & 0x1) == 0) {
+ State = LinkStateResetExit;
+ }
+ }
+ //
+ // For compliance we always leave link in enabled state
+ //
+ if (Engine->Type.Port.PortData.MiscControls.LinkComplianceMode) {
+ State = LinkStateResetExit;
+ }
+ PcieConfigUpdatePortStatus (Engine, 0, INIT_STATUS_PCIE_TRAINING_SUCCESS);
+ } else {
+ //
+ // SB port
+ //
+ State = LinkStateTrainingSuccess;
+ }
+ PcieTrainingSetPortState (Engine, State, FALSE, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Master procedure to init various features on all active ports
+ *
+ *
+ *
+ *
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_STATUS
+ *
+ */
+
+AGESA_STATUS
+STATIC
+PciePostEarlyPortInitKB (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS Status;
+ Status = AGESA_SUCCESS;
+ // Distributed Training started at PciePortInit complete it now to get access to PCIe devices
+ if (Pcie->TrainingAlgorithm == PcieTrainingDistributed) {
+ Pcie->TrainingExitState = LinkStateTrainingCompleted;
+ }
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Master procedure to init various features on all active ports
+ *
+ *
+ *
+ *
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_STATUS
+ *
+ */
+
+AGESA_STATUS
+STATIC
+PciePostPortInitKB (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS Status;
+ Status = AGESA_SUCCESS;
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_PCIE_ENGINE,
+ PciePostPortInitCallbackKB,
+ NULL,
+ Pcie
+ );
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Master procedure to init various features on all active ports
+ *
+ *
+ *
+ *
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_STATUS
+ *
+ */
+
+AGESA_STATUS
+STATIC
+PciePostS3PortInitKB (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS Status;
+ Status = AGESA_SUCCESS;
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_PCIE_ENGINE,
+ PciePostS3PortInitCallbackKB,
+ NULL,
+ Pcie
+ );
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Pcie Init
+ *
+ *
+ *
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_SUCCESS Topology successfully mapped
+ * @retval AGESA_ERROR Topology can not be mapped
+ */
+
+AGESA_STATUS
+STATIC
+PciePostInitKB (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIE_LINK_SPEED_CAP GlobalSpeedCap;
+
+ GlobalSpeedCap = PcieUtilGlobalGenCapability (
+ PCIE_PORT_GEN_CAP_BOOT | PCIE_GLOBAL_GEN_CAP_TRAINED_PORTS | PCIE_GLOBAL_GEN_CAP_HOTPLUG_PORTS,
+ Pcie
+ );
+
+
+ PcieSetVoltageKB (GlobalSpeedCap, Pcie);
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PCIe Post Init
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+AGESA_STATUS
+PciePostEarlyInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS Status;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePostEarlyInterfaceKB Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+ Status = PcieLocateConfigurationData (StdHeader, &Pcie);
+ IDS_OPTION_HOOK (IDS_BEFORE_GPP_TRAINING, Pcie, StdHeader);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_SUCCESS) {
+ PciePortsVisibilityControlV5 (UnhidePorts, Pcie);
+
+ Status = PciePostEarlyPortInitKB (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ Status = PcieTraining (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ PciePortsVisibilityControlV5 (HidePorts, Pcie);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePostEarlyInterfaceKB Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PCIe Post Init
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+AGESA_STATUS
+PciePostInterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS Status;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePostInterfaceKB Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+ Status = PcieLocateConfigurationData (StdHeader, &Pcie);
+ IDS_OPTION_HOOK (IDS_BEFORE_GEN2_INIT, Pcie, StdHeader);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_SUCCESS) {
+ PciePortsVisibilityControlV5 (UnhidePorts, Pcie);
+
+ Status = PciePostInitKB (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ Status = PciePostPortInitKB (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ Status = PcieTraining (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ PciePortsVisibilityControlV5 (HidePorts, Pcie);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePostInterfaceKB Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PCIe Post Init
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+STATIC AGESA_STATUS
+PciePostS3InterfaceKB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS Status;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePostS3InterfaceKB Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+ Status = PcieLocateConfigurationData (StdHeader, &Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_SUCCESS) {
+ PciePortsVisibilityControlV5 (UnhidePorts, Pcie);
+
+ Status = PciePostInitKB (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ if (Pcie->TrainingAlgorithm == PcieTrainingDistributed) {
+ Status = PciePostS3PortInitKB (Pcie);
+ } else {
+ Status = PciePostPortInitKB (Pcie);
+ }
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ Status = PcieTraining (Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ PciePortsVisibilityControlV5 (HidePorts, Pcie);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePostS3InterfaceKB Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PCIe S3 restore
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @param[in] ContextLength Context Length (not used)
+ * @param[in] Context Context pointer (not used)
+ */
+VOID
+PcieLateRestoreInitKBS3Script (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 ContextLength,
+ IN VOID* Context
+ )
+{
+ PciePostS3InterfaceKB (StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieTablesKB.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieTablesKB.c
new file mode 100644
index 0000000..10f8828
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/PcieTablesKB.c
@@ -0,0 +1,225 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe init tables.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85361 $ @e \$Date: 2013-01-07 11:15:28 -0600 (Mon, 07 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbRegistersKB.h"
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T A B L E S
+ *----------------------------------------------------------------------------------------
+ */
+
+STATIC PCIE_HOST_REGISTER_ENTRY PcieInitEarlyTable ROMDATA[] = {
+ {
+ PHY_SPACE (0, 0, D0F0xE4_PHY_4440_ADDRESS),
+ D0F0xE4_PHY_4440_PllDbgRoIPFDResetCntrl_MASK,
+ 0x2 << D0F0xE4_PHY_4440_PllDbgRoIPFDResetCntrl_OFFSET
+ },
+ {
+ PHY_SPACE (0, 0, D0F0xE4_PHY_4450_ADDRESS),
+ D0F0xE4_PHY_4450_PllCfgROVTOIBiasCntrlOvrdVal0_MASK |
+ D0F0xE4_PHY_4450_PllCfgROBWCntrlOvrdVal0_MASK,
+ (0x0 << D0F0xE4_PHY_4450_PllCfgROVTOIBiasCntrlOvrdVal0_OFFSET) | (0x90 << D0F0xE4_PHY_4450_PllCfgROBWCntrlOvrdVal0_OFFSET)
+ },
+ {
+ PHY_SPACE (0, 0, D0F0xE4_PHY_0004_ADDRESS),
+ D0F0xE4_PHY_0004_CfgIdleDetTh_MASK,
+ 0x0 << D0F0xE4_PHY_0004_CfgIdleDetTh_OFFSET
+ }
+ };
+
+CONST PCIE_HOST_REGISTER_TABLE_HEADER ROMDATA PcieInitEarlyTableKB = {
+ &PcieInitEarlyTable[0],
+ sizeof (PcieInitEarlyTable) / sizeof (PCIE_HOST_REGISTER_ENTRY)
+};
+
+STATIC PCIE_HOST_REGISTER_ENTRY ROMDATA CoreInitTable [] = {
+ {
+ D0F0xE4_CORE_0020_ADDRESS,
+ D0F0xE4_CORE_0020_CiRcOrderingDis_MASK |
+ D0F0xE4_CORE_0020_CiSlvOrderingDis_MASK,
+ (0x1 << D0F0xE4_CORE_0020_CiRcOrderingDis_OFFSET)
+ },
+ {
+ D0F0xE4_CORE_0010_ADDRESS,
+ D0F0xE4_CORE_0010_RxUmiAdjPayloadSize_MASK,
+ (0x4 << D0F0xE4_CORE_0010_RxUmiAdjPayloadSize_OFFSET)
+ },
+ {
+ D0F0xE4_CORE_001C_ADDRESS,
+ D0F0xE4_CORE_001C_TxArbRoundRobinEn_MASK |
+ D0F0xE4_CORE_001C_TxArbSlvLimit_MASK |
+ D0F0xE4_CORE_001C_TxArbMstLimit_MASK,
+ (0x1 << D0F0xE4_CORE_001C_TxArbRoundRobinEn_OFFSET) |
+ (0x4 << D0F0xE4_CORE_001C_TxArbSlvLimit_OFFSET) |
+ (0x4 << D0F0xE4_CORE_001C_TxArbMstLimit_OFFSET)
+ },
+ {
+ D0F0xE4_CORE_0040_ADDRESS,
+ D0F0xE4_CORE_0040_PElecIdleMode_MASK,
+ (0x1 << D0F0xE4_CORE_0040_PElecIdleMode_OFFSET)
+ },
+ {
+ D0F0xE4_CORE_0002_ADDRESS,
+ D0F0xE4_CORE_0002_HwDebug_0_MASK,
+ (0x1 << D0F0xE4_CORE_0002_HwDebug_0_OFFSET)
+ },
+ {
+ D0F0xE4_CORE_00C1_ADDRESS,
+ D0F0xE4_CORE_00C1_StrapLinkBwNotificationCapEn_MASK |
+ D0F0xE4_CORE_00C1_StrapGen2Compliance_MASK,
+ (0x1 << D0F0xE4_CORE_00C1_StrapLinkBwNotificationCapEn_OFFSET) |
+ (0x1 << D0F0xE4_CORE_00C1_StrapGen2Compliance_OFFSET)
+ },
+ {
+ D0F0xE4_CORE_00B0_ADDRESS,
+ D0F0xE4_CORE_00B0_StrapF0MsiEn_MASK |
+ D0F0xE4_CORE_00B0_StrapF0AerEn_MASK,
+ (0x1 << D0F0xE4_CORE_00B0_StrapF0MsiEn_OFFSET) | (0x0 << D0F0xE4_CORE_00B0_StrapF0AerEn_OFFSET)
+ }
+};
+
+CONST PCIE_HOST_REGISTER_TABLE_HEADER ROMDATA CoreInitTableKB = {
+ &CoreInitTable[0],
+ sizeof (CoreInitTable) / sizeof (PCIE_HOST_REGISTER_ENTRY)
+};
+
+
+STATIC PCIE_PORT_REGISTER_ENTRY ROMDATA PortInitEarlyTable [] = {
+ {
+ DxFxxE4_x70_ADDRESS,
+ DxFxxE4_x70_RxRcbCplTimeoutMode_MASK,
+ (0x1 << DxFxxE4_x70_RxRcbCplTimeoutMode_OFFSET)
+ },
+ {
+ DxFxxE4_xA0_ADDRESS,
+ DxFxxE4_xA0_Lc16xClearTxPipe_MASK | DxFxxE4_xA0_LcL1ImmediateAck_MASK | DxFxxE4_xA0_LcL0sInactivity_MASK,
+ (0x1 << DxFxxE4_xA0_Lc16xClearTxPipe_OFFSET) |
+ (0x1 << DxFxxE4_xA0_LcL1ImmediateAck_OFFSET) |
+ (0x6 << DxFxxE4_xA0_LcL0sInactivity_OFFSET)
+ },
+ {
+ DxFxxE4_xA1_ADDRESS,
+ DxFxxE4_xA1_LcDontGotoL0sifL1Armed_MASK,
+ (0x1 << DxFxxE4_xA1_LcDontGotoL0sifL1Armed_OFFSET)
+ },
+ {
+ DxFxxE4_xA2_ADDRESS,
+ DxFxxE4_xA2_LcRenegotiateEn_MASK | DxFxxE4_xA2_LcUpconfigureSupport_MASK,
+ (0x1 << DxFxxE4_xA2_LcRenegotiateEn_OFFSET) |
+ (0x1 << DxFxxE4_xA2_LcUpconfigureSupport_OFFSET)
+ },
+ {
+ DxFxxE4_xA3_ADDRESS,
+ DxFxxE4_xA3_LcXmitFtsBeforeRecovery_MASK,
+ (0x1 << DxFxxE4_xA3_LcXmitFtsBeforeRecovery_OFFSET)
+ },
+ {
+ DxFxxE4_xB1_ADDRESS,
+ DxFxxE4_xB1_LcElecIdleMode_MASK |
+ DxFxxE4_xB1_LcDeassertRxEnInL0s_MASK |
+ DxFxxE4_xB1_LcBlockElIdleinL0_MASK,
+ (0x1 << DxFxxE4_xB1_LcElecIdleMode_OFFSET) |
+ (0x1 << DxFxxE4_xB1_LcDeassertRxEnInL0s_OFFSET) |
+ (0x1 << DxFxxE4_xB1_LcBlockElIdleinL0_OFFSET)
+ },
+ {
+ 0xC0,
+ 0x70000,
+ (0x1 << 16)
+ }
+};
+
+CONST PCIE_PORT_REGISTER_TABLE_HEADER ROMDATA PortInitEarlyTableKB = {
+ &PortInitEarlyTable[0],
+ sizeof (PortInitEarlyTable) / sizeof (PCIE_PORT_REGISTER_ENTRY)
+};
+
+
+STATIC PCIE_PORT_REGISTER_ENTRY ROMDATA PortInitMidTable [] = {
+ {
+ DxFxxE4_xA2_ADDRESS,
+ DxFxxE4_xA2_LcDynLanesPwrState_MASK,
+ (0x3 << DxFxxE4_xA2_LcDynLanesPwrState_OFFSET)
+ },
+ {
+ DxFxxE4_x6A_ADDRESS,
+ DxFxxE4_x6A_ErrReportingDis_MASK,
+ (0x1 << DxFxxE4_x6A_ErrReportingDis_OFFSET)
+ },
+// {
+// 0xC0,
+// DxFxxE4_xC0_StrapAutoRcSpeedNegotiationDis_MASK,
+// (0x1 << DxFxxE4_xC0_StrapAutoRcSpeedNegotiationDis_OFFSET)
+// }
+};
+
+CONST PCIE_PORT_REGISTER_TABLE_HEADER ROMDATA PortInitMidTableKB = {
+ &PortInitMidTable[0],
+ sizeof (PortInitMidTable) / sizeof (PCIE_PORT_REGISTER_ENTRY)
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/excel925.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/excel925.h
new file mode 100644
index 0000000..1d9fc9f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbInitKB/excel925.h
@@ -0,0 +1,113 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * SCS Binary
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85201 $ @e \$Date: 2013-01-03 14:13:50 -0600 (Thu, 03 Jan 2013) $
+ *
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+#ifndef _EXCEL925_H_
+#define _EXCEL925_H_
+
+UINT8 excel925[] = {
+ 0x21, 0x53, 0x43, 0x53, 0x4B, 0x41, 0x42, 0x49, 0x4E, 0x49, 0x20, 0x20, 0x56, 0x30, 0x2E, 0x30,
+ 0x2E, 0x30, 0x2E, 0x31, 0x1 , 0x00, 0x00, 0x4 , 0x00, 0x3 , 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x16, 0x2 , 0x1 , 0xA5, 0xF7, 0x2D, 0x83, 0x4E, 0xC3, 0xC3, 0x40, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0xF0, 0x3F, 0x2 , 0x1 , 0x80, 0x00, 0xCA, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0xB8, 0x59, 0x00, 0x00, 0x92, 0x00, 0x96, 0xB8, 0x00, 0xC3, 0x00, 0xB5, 0x54, 0xB4, 0x8B, 0x62,
+ 0xB5, 0x00, 0xC4, 0xC1, 0x00, 0xA6, 0x55, 0x00, 0x00, 0xC7, 0x00, 0x38, 0x3C, 0x71, 0x4C, 0xB0,
+ 0x00, 0x00, 0xB7, 0xC4, 0x00, 0xB5, 0x86, 0xA4, 0x00, 0xC4, 0x00, 0x9B, 0xCB, 0x9D, 0x85, 0xC2,
+ 0xFF, 0x86, 0xD4, 0xC0, 0x00, 0x00, 0xB0, 0xBD, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x3 , 0x1 , 0xC7, 0x50, 0x7A, 0x3F,
+ 0x4A, 0xBE, 0x9E, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x3F, 0x2 , 0x1 , 0x80, 0x00,
+ 0x00, 0x91, 0x00, 0x70, 0x00, 0x00, 0x98, 0x98, 0x9F, 0x9F, 0x00, 0x00, 0x43, 0x43, 0x43, 0x43,
+ 0x97, 0x00, 0xB4, 0x00, 0x00, 0x00, 0xAE, 0x00, 0x00, 0x00, 0x9E, 0x93, 0x00, 0x00, 0x00, 0x77,
+ 0x00, 0x00, 0xA5, 0xA5, 0x00, 0x00, 0x00, 0x00, 0xA2, 0xA2, 0xA2, 0xA2, 0x00, 0x90, 0xDA, 0x96,
+ 0x8D, 0x8D, 0x8D, 0x8D, 0x90, 0x00, 0xFF, 0x00, 0xE6, 0x00, 0xDA, 0x4E, 0x00, 0x89, 0x89, 0x00,
+ 0xDC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x89, 0x99, 0xA9, 0x91, 0x98, 0xC9, 0x00, 0x00,
+ 0x00, 0x16, 0x4 , 0x1 , 0xCC, 0xBF, 0x86, 0xAD, 0x43, 0x3A, 0x9D, 0x40, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0xF0, 0x3F, 0x2 , 0x1 , 0x80, 0x00, 0x4E, 0x00, 0x00, 0x00, 0x00, 0x00, 0xB2, 0xB2,
+ 0x7E, 0x7E, 0x00, 0x00, 0x97, 0x97, 0x97, 0x97, 0xA0, 0x00, 0xBE, 0x00, 0x00, 0x00, 0xBA, 0x00,
+ 0x00, 0x00, 0x9D, 0x57, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, 0xA8, 0xA8, 0x00, 0x00, 0x4 , 0x4 ,
+ 0xAB, 0xAB, 0xAB, 0xAB, 0x00, 0x00, 0xDE, 0x00, 0x75, 0x75, 0x75, 0x75, 0x64, 0x91, 0xFF, 0x00,
+ 0xE0, 0xE4, 0x95, 0x00, 0x00, 0x80, 0x80, 0xE9, 0xD8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x95, 0xA5, 0xB5, 0xDE, 0x00, 0xB9, 0xCF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+#endif // _EXCEL925_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbIoapic/GnbIoapic.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbIoapic/GnbIoapic.c
new file mode 100644
index 0000000..3a7c6ac
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbIoapic/GnbIoapic.c
@@ -0,0 +1,224 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * NB IOAPIC Initialization
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "PcieConfigLib.h"
+#include "Filecode.h"
+#include "GnbRegistersCommonV2.h"
+#define FILECODE PROC_GNB_MODULES_GNBIOAPIC_GNBIOAPIC_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GnbNbIoapicInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Callback to init IOAPIC on GNB port
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Not used
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+IoapicInitCallbackV5 (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCI_ADDR GnbPciAddress;
+ D0F0xFC_x10_STRUCT D0F0xFC_x10;
+
+ GnbPciAddress = GnbGetHostPciAddress ((GNB_HANDLE *) PcieConfigGetParent (DESCRIPTOR_SILICON, &Engine->Header));
+ D0F0xFC_x10.Value = 0x0;
+
+ // Bounds check values - make sure the value is small enough to fit the field size
+ ASSERT (Engine->Type.Port.PortData.ApicDeviceInfo.GroupMap < (1 << D0F0xFC_x10_BrExtIntrGrp_WIDTH));
+ ASSERT (Engine->Type.Port.PortData.ApicDeviceInfo.Swizzle < (1 << D0F0xFC_x10_BrExtIntrSwz_WIDTH));
+ ASSERT (Engine->Type.Port.PortData.ApicDeviceInfo.BridgeInt < (1 << D0F0xFC_x10_BrIntIntrMap_WIDTH));
+
+ // Get the configuration from the PCIe_PORT_DATA APIC_DEVICE_INFO struct
+ D0F0xFC_x10.Field.BrExtIntrGrp = Engine->Type.Port.PortData.ApicDeviceInfo.GroupMap;
+ D0F0xFC_x10.Field.BrExtIntrSwz = Engine->Type.Port.PortData.ApicDeviceInfo.Swizzle;
+ D0F0xFC_x10.Field.BrIntIntrMap = Engine->Type.Port.PortData.ApicDeviceInfo.BridgeInt;
+
+ // Write the register
+ GnbLibPciIndirectWrite (
+ GnbPciAddress.AddressValue | D0F0xF8_ADDRESS,
+ D0F0xFC_x10_ADDRESS + Engine->Type.Port.LogicalBridgeId,
+ AccessS3SaveWidth32,
+ &D0F0xFC_x10.Value,
+ GnbLibGetHeader (Pcie)
+ );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Callback to Enable IOAPIC on GNB
+ *
+ *
+ *
+ * @param[in] Descriptor Silicon descriptor
+ * @param[in] Buffer Pointer to buffer
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_STATUS
+ */
+STATIC AGESA_STATUS
+IoapicEnableCallbackV5 (
+ IN PCIe_DESCRIPTOR_HEADER *Descriptor,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCI_ADDR GnbPciAddress;
+ D0F0xFC_x00_STRUCT D0F0xFC_x00;
+ UINT32 *AddressPtr;
+ UINT32 AddressLow;
+ UINT32 AddressHigh;
+
+ D0F0xFC_x00.Value = 0x0;
+ D0F0xFC_x00.Field.IoapicEnable = 1;
+ // Set the extended ID enable (default)
+ D0F0xFC_x00.Field.IoapicIdExtEn = 1;
+ // Enable SB feature for every APIC. ACPI OS may disable this once the OS boots
+ D0F0xFC_x00.Field.IoapicSbFeatureEn = 1;
+ AddressPtr = (UINT32*) Buffer;
+ AddressLow = AddressPtr[0] & 0xFFFFFF00;
+ AddressHigh = AddressPtr[1];
+ // Get the PCI address of the GNB
+ GnbPciAddress = GnbGetHostPciAddress (GnbGetHandle (GnbLibGetHeader (Pcie)));
+ // If the BLDCFG base address is null, assume that the base address of the APIC has already been programmed
+ // If base address is defined in BLDCFG, program it here
+ if ((AddressLow != 0) || (AddressHigh != 0)) {
+ GnbLibPciIndirectWrite (
+ GnbPciAddress.AddressValue | D0F0xF8_ADDRESS,
+ D0F0xFC_x01_ADDRESS,
+ AccessS3SaveWidth32,
+ &AddressLow,
+ GnbLibGetHeader (Pcie)
+ );
+ GnbLibPciIndirectWrite (
+ GnbPciAddress.AddressValue | D0F0xF8_ADDRESS,
+ D0F0xFC_x02_ADDRESS,
+ AccessS3SaveWidth32,
+ &AddressHigh,
+ GnbLibGetHeader (Pcie)
+ );
+ }
+ // Enable the IOAPIC.
+ GnbLibPciIndirectWrite (
+ GnbPciAddress.AddressValue | D0F0xF8_ADDRESS,
+ D0F0xFC_x00_ADDRESS,
+ AccessS3SaveWidth32,
+ &D0F0xFC_x00.Value,
+ GnbLibGetHeader (Pcie)
+ );
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init NB IOAPIC
+ *
+ *
+ *
+ * @param[in] StdHeader Standard Configuration Header
+ */
+
+AGESA_STATUS
+GnbNbIoapicInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AMD_MID_PARAMS *MidParamsPtr;
+ AGESA_STATUS Status;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ UINT64 GnbNbIoapicAddress;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbNbIoapicInterface Enter\n");
+ Status = PcieLocateConfigurationData (StdHeader, &Pcie);
+ if (Status == AGESA_SUCCESS) {
+ MidParamsPtr = (AMD_MID_PARAMS *) StdHeader;
+ GnbNbIoapicAddress = MidParamsPtr->GnbMidConfiguration.GnbIoapicAddress;
+ // For each ENGINE, configure the group, swizzle, and pin per APIC_DEVICE_INFO
+ PcieConfigRunProcForAllEngines (DESCRIPTOR_ALLOCATED | DESCRIPTOR_PCIE_ENGINE, IoapicInitCallbackV5, NULL, Pcie);
+
+ // For each GNB, configure the IOAPIC Enable, ID Size, and SB Feature Enable
+ Status = PcieConfigRunProcForAllDescriptors (DESCRIPTOR_SILICON, 0, DESCRIPTOR_TERMINATE_TOPOLOGY, IoapicEnableCallbackV5, &GnbNbIoapicAddress, Pcie);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbNbIoapicInterface Exit\n");
+ return Status;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV1/GnbNbInitLibV1.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV1/GnbNbInitLibV1.h
new file mode 100644
index 0000000..4295657
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV1/GnbNbInitLibV1.h
@@ -0,0 +1,99 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * NB services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBNBINITLIBV1_H_
+#define _GNBNBINITLIBV1_H_
+
+
+AGESA_STATUS
+GnbSetTom (
+ IN PCI_ADDR NbPciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbLpcDmaDeadlockPrevention (
+ IN PCI_ADDR NbPciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbOrbDynamicWake (
+ IN PCI_ADDR NbPciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbLock (
+ IN PCI_ADDR NbPciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbClumpUnitID (
+ IN PCI_ADDR NbPciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GnbLocateHighestVidIndex (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+UINT8
+GnbLocateLowestVidIndex (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GnbLocateHighestVidCode (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GnbLocateLowestVidCode (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV4/GnbNbInitLibV4.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV4/GnbNbInitLibV4.c
new file mode 100644
index 0000000..b26679b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV4/GnbNbInitLibV4.c
@@ -0,0 +1,386 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * NB services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "S3SaveState.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbNbInitLibV4.h"
+#include "GnbRegistersCommonV2.h"
+#include "heapManager.h"
+#include "GnbFamServices.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBNBINITLIBV4_GNBNBINITLIBV4_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+#define SMC_RAM_START_ADDR 0x10000ul
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef struct {
+ GNB_PCI_SCAN_DATA ScanData;
+ GNB_TOPOLOGY_INFO *TopologyInfo;
+} GNB_TOPOLOGY_INFO_DATA;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GnbSmuServiceRequestV4S3Script (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 ContextLength,
+ IN VOID *Context
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check a PCIE device to see if it supports phantom functions
+ *
+ * @param[in] Device Device pci address
+ * @param[in] StdHeader Standard configuration header
+ * @return TRUE Current device supports phantom functions
+ */
+STATIC BOOLEAN
+GnbCheckPhantomFuncSupport (
+ IN PCI_ADDR Device,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 PcieCapPtr;
+ UINT32 Value;
+ Value = 0;
+
+ PcieCapPtr = GnbLibFindPciCapability (Device.AddressValue, PCIE_CAP_ID, StdHeader);
+ if (PcieCapPtr != 0) {
+ GnbLibPciRead (Device.AddressValue | (PcieCapPtr + 4), AccessWidth32, &Value, StdHeader);
+ }
+ return ((Value & (BIT3 | BIT4)) != 0) ? TRUE : FALSE;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Evaluate device
+ *
+ *
+ *
+ * @param[in] Device PCI Address
+ * @param[in,out] ScanData Scan configuration data
+ * @retval Scan Status
+ */
+
+SCAN_STATUS
+STATIC
+GnbTopologyInfoScanCallback (
+ IN PCI_ADDR Device,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ )
+{
+ SCAN_STATUS ScanStatus;
+ GNB_TOPOLOGY_INFO_DATA *GnbTopologyInfo;
+ PCIE_DEVICE_TYPE DeviceType;
+ ScanStatus = SCAN_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, " GnbIommuInfoScanCallback for Device = %d:%d:%d\n",
+ Device.Address.Bus,
+ Device.Address.Device,
+ Device.Address.Function
+ );
+ GnbTopologyInfo = (GNB_TOPOLOGY_INFO_DATA *)ScanData;
+ ScanStatus = SCAN_SUCCESS;
+ DeviceType = GnbLibGetPcieDeviceType (Device, ScanData->StdHeader);
+ switch (DeviceType) {
+ case PcieDeviceRootComplex:
+ case PcieDeviceDownstreamPort:
+ GnbLibPciScanSecondaryBus (Device, &GnbTopologyInfo->ScanData);
+ break;
+ case PcieDeviceUpstreamPort:
+ GnbLibPciScanSecondaryBus (Device, &GnbTopologyInfo->ScanData);
+ ScanStatus = SCAN_SKIP_FUNCTIONS | SCAN_SKIP_DEVICES | SCAN_SKIP_BUSES;
+ break;
+ case PcieDevicePcieToPcix:
+ GnbTopologyInfo->TopologyInfo->PcieToPciexBridge = TRUE;
+ ScanStatus = SCAN_SKIP_FUNCTIONS | SCAN_SKIP_DEVICES | SCAN_SKIP_BUSES;
+ break;
+ case PcieDeviceEndPoint:
+ case PcieDeviceLegacyEndPoint:
+ if (GnbCheckPhantomFuncSupport (Device, ScanData->StdHeader)) {
+ GnbTopologyInfo->TopologyInfo->PhantomFunction = TRUE;
+ }
+ ScanStatus = SCAN_SKIP_DEVICES | SCAN_SKIP_BUSES;
+ break;
+ default:
+ break;
+ }
+ return ScanStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get IOMMU topology info
+ *
+ *
+ *
+ * @param[in] StartPciAddress Start PCI address
+ * @param[in] EndPciAddress End PCI address
+ * @param[in] TopologyInfo Topology info structure
+ * @param[in] StdHeader Standard Configuration Header
+ */
+
+AGESA_STATUS
+GnbGetTopologyInfoV4 (
+ IN PCI_ADDR StartPciAddress,
+ IN PCI_ADDR EndPciAddress,
+ OUT GNB_TOPOLOGY_INFO *TopologyInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GNB_TOPOLOGY_INFO_DATA GnbTopologyInfo;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbGetTopologyInfoV4 Enter\n");
+ GnbTopologyInfo.ScanData.GnbScanCallback = GnbTopologyInfoScanCallback;
+ GnbTopologyInfo.ScanData.StdHeader = StdHeader;
+ GnbTopologyInfo.TopologyInfo = TopologyInfo;
+ GnbLibPciScan (StartPciAddress, EndPciAddress, &GnbTopologyInfo.ScanData);
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbGetTopologyInfoV4 Exit\n");
+ return AGESA_SUCCESS;
+}
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/*----------------------------------------------------------------------------------------*/
+/**
+ * SMU firmware download
+ *
+ *
+ * @param[in] GnbPciAddress GNB Pci Address
+ * @param[in] Firmware Pointer tp firmware
+ * @param[in] StdHeader Standard configuration header
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get IOMMU PCI address
+ *
+ *
+ * @param[in] GnbHandle GNB handle
+ * @param[in] StdHeader Standard configuration header
+ */
+
+PCI_ADDR
+GnbGetIommuPciAddressV4 (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR GnbIommuPciAddress;
+ GnbIommuPciAddress = GnbGetHostPciAddress (GnbHandle);
+ GnbIommuPciAddress.Address.Function = 0x2;
+ return GnbIommuPciAddress;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * UnitID Clumping
+ *
+ *
+ * @param[in] GnbHandle GNB handle
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GnbClumpUnitIdV4 (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ PCIe_ENGINE_CONFIG *EngineList;
+ UINT32 Value;
+
+ Value = 0;
+ EngineList = (PCIe_ENGINE_CONFIG *) PcieConfigGetChild (DESCRIPTOR_PCIE_ENGINE, &GnbHandle->Header);
+ while (EngineList != NULL) {
+ if (EngineList->Type.Port.NumberOfUnitId != 0) {
+ if (!PcieConfigIsActivePcieEngine (EngineList)) {
+ Value |= (((1 << EngineList->Type.Port.NumberOfUnitId) - 1) << EngineList->Type.Port.UnitId);
+ } else {
+ if (EngineList->Type.Port.NumberOfUnitId > 1) {
+ Value |= (((1 << (EngineList->Type.Port.NumberOfUnitId - 1)) - 1) << (EngineList->Type.Port.UnitId + 1));
+ }
+ }
+ }
+ EngineList = (PCIe_ENGINE_CONFIG *) PcieConfigGetNextTopologyDescriptor (EngineList, DESCRIPTOR_TERMINATE_GNB);
+ }
+ // Set GNB
+ GnbLibPciIndirectRMW (
+ GnbHandle->Address.AddressValue | D0F0x94_ADDRESS,
+ D0F0x98_x3A_ADDRESS,
+ AccessS3SaveWidth32,
+ (UINT32) ~Value,
+ Value,
+ StdHeader
+ );
+ //Set UNB
+ GnbLibPciRMW (
+ MAKE_SBDFO (0, 0, GnbHandle->NodeId + 0x18, 0, D18F0x110_ADDRESS + GnbHandle->LinkId * 4),
+ AccessS3SaveWidth32,
+ (UINT32) ~Value,
+ Value,
+ StdHeader
+ );
+}
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Config GNB to prevent LPC deadlock scenario
+ *
+ *
+ * @param[in] GnbHandle GNB handle
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+GnbLpcDmaDeadlockPreventionV4 (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_ENGINE_CONFIG *EngineList;
+
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &GnbHandle->Header);
+ EngineList = (PCIe_ENGINE_CONFIG *) PcieConfigGetChild (DESCRIPTOR_ALL_ENGINES, &GnbHandle->Header);
+ while (EngineList != NULL) {
+ if (PcieConfigIsPcieEngine (EngineList) && PcieConfigIsSbPcieEngine (EngineList)) {
+ PcieRegisterRMW (
+ PcieConfigGetParentWrapper (EngineList),
+ CORE_SPACE (EngineList->Type.Port.CoreId, D0F0xE4_CORE_0010_ADDRESS),
+ D0F0xE4_CORE_0010_UmiNpMemWrite_MASK,
+ 1 << D0F0xE4_CORE_0010_UmiNpMemWrite_OFFSET,
+ TRUE,
+ Pcie
+ );
+ //Enable special NP memory write protocol in ORB
+ GnbLibPciIndirectRMW (
+ GnbHandle->Address.AddressValue | D0F0x94_ADDRESS,
+ D0F0x98_x06_ADDRESS,
+ AccessS3SaveWidth32,
+ 0xFFFFFFFF,
+ 1 << D0F0x98_x06_UmiNpMemWrEn_OFFSET,
+ StdHeader
+ );
+ break;
+ }
+ EngineList = (PCIe_ENGINE_CONFIG *) PcieConfigGetNextTopologyDescriptor (EngineList, DESCRIPTOR_TERMINATE_GNB);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable IOMMU base address. (MMIO space )
+ *
+ *
+ * @param[in] GnbHandle GNB handle
+ * @param[in] StdHeader Standard Configuration Header
+ * @retval AGESA_SUCCESS
+ * @retval AGESA_ERROR
+ */
+
+AGESA_STATUS
+GnbEnableIommuMmioV4 (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ UINT16 CapabilityOffset;
+ UINT64 BaseAddress;
+ UINT32 Value;
+ PCI_ADDR GnbIommuPciAddress;
+
+ Status = AGESA_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbEnableIommuMmio Enter\n");
+
+ if (GnbFmCheckIommuPresent (GnbHandle, StdHeader)) {
+ GnbIommuPciAddress = GnbGetIommuPciAddressV4 (GnbHandle, StdHeader);
+ CapabilityOffset = GnbLibFindPciCapability (GnbIommuPciAddress.AddressValue, IOMMU_CAP_ID, StdHeader);
+
+ GnbLibPciRead (GnbIommuPciAddress.AddressValue | (CapabilityOffset + 0x4), AccessWidth32, &Value, StdHeader);
+ BaseAddress = (UINT64) Value << 32;
+ GnbLibPciRead (GnbIommuPciAddress.AddressValue | (CapabilityOffset + 0x8), AccessWidth32, &Value, StdHeader);
+ BaseAddress |= Value;
+
+ if ((BaseAddress & 0xfffffffffffffffe) != 0x0) {
+ IDS_HDT_CONSOLE (GNB_TRACE, " Enable IOMMU MMIO at address %x for Socket %d Silicon %d\n", BaseAddress, GnbGetSocketId (GnbHandle) , GnbGetSiliconId (GnbHandle));
+ GnbLibPciRMW (GnbIommuPciAddress.AddressValue | (CapabilityOffset + 0x8), AccessS3SaveWidth32, 0xFFFFFFFF, 0x0, StdHeader);
+ GnbLibPciRMW (GnbIommuPciAddress.AddressValue | (CapabilityOffset + 0x4), AccessS3SaveWidth32, 0xFFFFFFFE, 0x1, StdHeader);
+ } else {
+ ASSERT (FALSE);
+ Status = AGESA_ERROR;
+ }
+ }
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbEnableIommuMmio Exit\n");
+ return Status;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV4/GnbNbInitLibV4.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV4/GnbNbInitLibV4.h
new file mode 100644
index 0000000..522a42e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV4/GnbNbInitLibV4.h
@@ -0,0 +1,122 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * NB services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBNBINITLIBV4_H_
+#define _GNBNBINITLIBV4_H_
+
+#pragma pack (push, 1)
+
+/// Firmware header
+typedef struct {
+ UINT32 Version; ///< Version
+ UINT32 HeaderLength; ///< Header length
+ UINT32 FirmwareLength; ///< Firmware length
+ UINT32 EntryPoint; ///< Entry point
+ UINT32 MessageDigest[5]; ///< Message digest
+ UINT32 Reserved_A[3]; ///< Reserved
+ UINT32 CurrentSystemState; ///< Current system state
+ UINT32 DpmCacHistory; ///< DpmCac History
+ UINT32 DpmResidencyCounters; ///< DPM recidency counters
+ UINT32 Reserved_B[16]; ///< Reserved
+ UINT32 Reserved_C[16]; ///< Reserved
+ UINT32 Reserved_D[16]; ///< Reserved
+ UINT32 HeaderEnd; ///< Header end signature
+} FIRMWARE_HEADER_V4;
+
+/// SMU service request contect
+typedef struct {
+ PCI_ADDR GnbPciAddress; ///< PCIe address of GNB
+ UINT8 RequestId; ///< Request/Msg ID
+} SMU_MSG_CONTEXT;
+
+#pragma pack (pop)
+
+AGESA_STATUS
+GnbGetTopologyInfoV4 (
+ IN PCI_ADDR StartPciAddress,
+ IN PCI_ADDR EndPciAddress,
+ OUT GNB_TOPOLOGY_INFO *TopologyInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbSmuServiceRequestV4 (
+ IN PCI_ADDR GnbPciAddress,
+ IN UINT8 RequestId,
+ IN UINT32 AccessFlags,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GnbSmuFirmwareLoadV4 (
+ IN PCI_ADDR GnbPciAddress,
+ IN FIRMWARE_HEADER_V4 *Firmware,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+PCI_ADDR
+GnbGetIommuPciAddressV4 (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbClumpUnitIdV4 (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+GnbLpcDmaDeadlockPreventionV4 (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GnbEnableIommuMmioV4 (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV5/GnbNbInitLibV5.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV5/GnbNbInitLibV5.c
new file mode 100644
index 0000000..516739a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV5/GnbNbInitLibV5.c
@@ -0,0 +1,348 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * NB services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "Filecode.h"
+#include "GnbRegistersCommonV2.h"
+#include "GnbF1Table.h"
+#define FILECODE PROC_GNB_MODULES_GNBNBINITLIBV5_GNBNBINITLIBV5_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+GnbSetTomV5 (
+ IN PCI_ADDR NbPciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GnbLocateHighestVidCodeV5 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+UINT8
+GnbLocateLowestVidCodeV5 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+GnbTranslateVidCodeToMillivoltV5 (
+ IN UINT8 Vid,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GnbLocateHighestVidIndexV5 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init NB set top of memory
+ *
+ *
+ *
+ * @param[in] NbPciAddress Gnb PCI address
+ * @param[in] StdHeader Standard Configuration Header
+ */
+
+AGESA_STATUS
+GnbSetTomV5 (
+ IN PCI_ADDR NbPciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ UINT64 MsrData;
+ UINT64 GnbTom2;
+ UINT64 GnbTom3;
+ UINT32 Value;
+
+ Status = AGESA_SUCCESS;
+ //Read memory size below 4G from MSR C001_001A
+ LibAmdMsrRead (TOP_MEM, &MsrData, StdHeader);
+ //Write to NB register 0x90
+ Value = (UINT32)MsrData & 0xFF800000; //Keep bits 31:23
+ GnbLibPciRMW (
+ NbPciAddress.AddressValue | D0F0x90_ADDRESS,
+ AccessS3SaveWidth32,
+ 0x007FFFFF,
+ Value,
+ StdHeader
+ );
+ if (Value == 0) {
+ Status = AGESA_WARNING;
+ }
+
+ GnbTom2 = 0;
+ GnbTom3 = 0;
+ LibAmdMsrRead (SYS_CFG, &MsrData, StdHeader);
+ if ((MsrData & BIT21) != 0) {
+ //If SYS_CFG(MtrrTom2En) then configure GNB TOM2 and TOM3
+ //Read memory size above 4G from TOP_MEM2 (MSR C001_001D)
+ LibAmdMsrRead (TOP_MEM2, &MsrData, StdHeader);
+ if ((MsrData & (UINT64)0x0000FFFFFFC00000) > ((UINT64)0x0000010000000000)) {
+ // If TOP_MEM2 is above 1TB, enable GNB TOM2 and TOM3
+ // Set TOM2 for below 1TB limit
+ GnbTom2 = 0x000000FD00000000;
+ // TOM3 is INCLUSIVE, so set it to TOM - 1 using bits 47:22
+ GnbTom3 = (MsrData - 1) & (UINT64)0x0000FFFFFFC00000;
+ } else {
+ // If TOP_MEM2 is below 1TB, set TOM2 using bits 39:22
+ GnbTom2 = MsrData & (UINT64)0x000000FFFFC00000; //Keep bits 39:22
+ // If TOP_MEM2 is below 1TB, disable GNB TOM3
+ GnbTom3 = 0;
+ }
+ }
+
+ if (GnbTom2 != 0) {
+ // Write memory size[39:32] to indirect register 1A[7:0]
+ Value = (UINT32) ((GnbTom2 >> 32) & 0xFF);
+ GnbLibPciIndirectRMW (
+ NbPciAddress.AddressValue | D0F0x60_ADDRESS,
+ D0F0x64_x1A_ADDRESS | IOC_WRITE_ENABLE,
+ AccessS3SaveWidth32,
+ 0xFFFFFF00,
+ Value,
+ StdHeader
+ );
+ // Write memory size[31:23] to indirect register 19[31:23] and enable memory through bit 0
+ Value = (UINT32)GnbTom2 & 0xFF800000; //Keep bits 31:23
+ Value |= BIT0; // Enable top of memory
+ GnbLibPciIndirectRMW (
+ NbPciAddress.AddressValue | D0F0x60_ADDRESS,
+ D0F0x64_x19_ADDRESS | IOC_WRITE_ENABLE,
+ AccessS3SaveWidth32,
+ 0x007FFFFF,
+ Value,
+ StdHeader
+ );
+ }
+
+ if (GnbTom3 != 0) {
+ // Above 1TB addressing TOM3 if MSR TOM is above 1TB
+ // Write memory size[47:22] to indirect register 4E[25:0] and enable memory through bit 31
+ Value = (UINT32) (GnbTom3 >> 22);
+ Value |= BIT31;
+ GnbLibPciIndirectRMW (
+ NbPciAddress.AddressValue | D0F0x60_ADDRESS,
+ 0x4e | IOC_WRITE_ENABLE,
+ AccessS3SaveWidth32,
+ 0x83FFFFFF,
+ Value,
+ StdHeader
+ );
+ }
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the index of highest SCLK VID
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval NBVDD VID index
+ */
+UINT8
+GnbLocateHighestVidIndexV5 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 MaxVid;
+ UINT8 MaxVidIndex;
+ UINTN Index;
+ PP_F1_ARRAY_V2 *PpF1Array;
+
+ PpF1Array = (PP_F1_ARRAY_V2 *) GnbLocateHeapBuffer (AMD_PP_F1_TABLE_HANDLE, StdHeader);
+ ASSERT (PpF1Array != NULL);
+ if (PpF1Array == NULL) {
+ IDS_HDT_CONSOLE (GNB_TRACE, " ERROR!!! Heap Location\n");
+ return 0;
+ }
+
+ MaxVidIndex = 0;
+ MaxVid = 0xff;
+ for (Index = 0; Index < 5; Index++) {
+ if (PpF1Array->PP_FUSE_ARRAY_V2_fld32[Index] != 0 && PpF1Array->PP_FUSE_ARRAY_V2_fld32[Index] < MaxVid) {
+ MaxVid = PpF1Array->PP_FUSE_ARRAY_V2_fld32[Index];
+ MaxVidIndex = (UINT8) Index;
+ }
+ }
+ ASSERT (PpF1Array->PP_FUSE_ARRAY_V2_fld32[MaxVidIndex] != 0);
+ return MaxVidIndex;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the index of lowest SCLK VID
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval NBVDD VID index
+ */
+STATIC UINT8
+GnbLocateLowestVidIndexV5 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 MinVidIndex;
+ UINTN Index;
+ PP_F1_ARRAY_V2 *PpF1Array;
+
+ PpF1Array = (PP_F1_ARRAY_V2 *) GnbLocateHeapBuffer (AMD_PP_F1_TABLE_HANDLE, StdHeader);
+ ASSERT (PpF1Array != NULL);
+ if (PpF1Array == NULL) {
+ IDS_HDT_CONSOLE (GNB_TRACE, " ERROR!!! Heap Location\n");
+ return 0;
+ }
+
+ MinVidIndex = 0;
+
+ for (Index = 0; Index < 5; Index++) {
+ if (PpF1Array->PP_FUSE_ARRAY_V2_fld32[Index] > PpF1Array->PP_FUSE_ARRAY_V2_fld32[MinVidIndex]) {
+ MinVidIndex = (UINT8) Index;
+ }
+ }
+ ASSERT (PpF1Array->PP_FUSE_ARRAY_V2_fld32[MinVidIndex] != 0);
+ return MinVidIndex;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the highest SCLK VID (high voltage)
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval NBVDD VID
+ */
+UINT8
+GnbLocateHighestVidCodeV5 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 MaxVidIndex;
+ PP_F1_ARRAY_V2 *PpF1Array;
+
+ PpF1Array = (PP_F1_ARRAY_V2 *) GnbLocateHeapBuffer (AMD_PP_F1_TABLE_HANDLE, StdHeader);
+ ASSERT (PpF1Array != NULL);
+
+ MaxVidIndex = GnbLocateHighestVidIndexV5 (StdHeader);
+ ASSERT (PpF1Array->PP_FUSE_ARRAY_V2_fld32[MaxVidIndex] != 0);
+ return PpF1Array->PP_FUSE_ARRAY_V2_fld32[MaxVidIndex];
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the lowest SCLK VID (low voltage)
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval NBVDD VID
+ */
+UINT8
+GnbLocateLowestVidCodeV5 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 MinVidIndex;
+ PP_F1_ARRAY_V2 *PpF1Array;
+
+ PpF1Array = (PP_F1_ARRAY_V2 *) GnbLocateHeapBuffer (AMD_PP_F1_TABLE_HANDLE, StdHeader);
+ ASSERT (PpF1Array != NULL);
+ MinVidIndex = GnbLocateLowestVidIndexV5 (StdHeader);
+ ASSERT (PpF1Array->PP_FUSE_ARRAY_V2_fld32[MinVidIndex] != 0);
+ return PpF1Array->PP_FUSE_ARRAY_V2_fld32[MinVidIndex];
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Translate VID code to millivolt with two fraction bits
+ *
+ *
+ * @param[in] Vid VID code
+ * @param[in] StdHeader Standard configuration header
+ * @retval 100 millivolt with two fraction bits
+ */
+
+UINT32
+GnbTranslateVidCodeToMillivoltV5 (
+ IN UINT8 Vid,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Millivolt;
+
+ // According to SVI2 spec, Vid Code 0xF7 is 6.25mv. 6.25mv is one boundary value.
+ if (Vid > 0xF7) {
+ Vid = 0xF7;
+ ASSERT (FALSE);
+ }
+
+ // Equation: VID code increase/decrease 1, there is one 6.25mv change.
+ // 6.25mv could be described using integer 625 with two fraction bits.
+ Millivolt = (0xF7 - Vid + 1) * 625;
+
+ return Millivolt;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV5/GnbNbInitLibV5.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV5/GnbNbInitLibV5.h
new file mode 100644
index 0000000..df1eaa9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbNbInitLibV5/GnbNbInitLibV5.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * NB services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBNBINITLIBV5_H_
+#define _GNBNBINITLIBV5_H_
+
+AGESA_STATUS
+GnbSetTomV5 (
+ IN PCI_ADDR NbPciAddress,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GnbLocateHighestVidIndexV5 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+UINT8
+GnbLocateLowestVidIndexV5 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GnbLocateHighestVidCodeV5 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GnbLocateLowestVidCodeV5 (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+GnbTranslateVidCodeToMillivoltV5 (
+ IN UINT8 Vid,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieAlibV2/PcieAlibV2.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieAlibV2/PcieAlibV2.c
new file mode 100644
index 0000000..0fb763b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieAlibV2/PcieAlibV2.c
@@ -0,0 +1,463 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe ALIB
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 87263 $ @e \$Date: 2013-01-31 09:18:06 -0600 (Thu, 31 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "cpuLateInit.h"
+#include "cpuRegisters.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbNbInitLibV1.h"
+#include "OptionGnb.h"
+#include "PcieAlibV2.h"
+#include "GnbF1Table.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_GNB_MODULES_GNBPCIEALIBV2_PCIEALIBV2_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern F_ALIB_GET *AlibGetBaseTableV2;
+extern F_ALIB_UPDATE *AlibDispatchTableV2[];
+extern GNB_BUILD_OPTIONS ROMDATA GnbBuildOptions;
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+AGESA_STATUS
+PcieAlibUpdateGnbData (
+ IN OUT VOID *SsdtBuffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+STATIC
+PcieAlibUpdatePciePortDataCallback (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+AGESA_STATUS
+PcieAlibBuildAcpiTableV2 (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT VOID **AlibSsdtPtr
+ );
+
+AGESA_STATUS
+PcieAlibUpdateVoltageData (
+ IN OUT VOID *DataBuffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+PcieAlibUpdatePcieData (
+ IN OUT VOID *DataBuffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Create ACPI ALIB SSDT table
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+PcieAlibV2Feature (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AMD_LATE_PARAMS *LateParamsPtr;
+ LateParamsPtr = (AMD_LATE_PARAMS*) StdHeader;
+ return PcieAlibBuildAcpiTableV2 (StdHeader, &LateParamsPtr->AcpiAlib);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Build ALIB ACPI table
+ *
+ *
+ *
+ * @param[in] StdHeader Standard Configuration Header
+ * @param[in,out] AlibSsdtPtr Pointer to pointer to ALIB SSDT table
+ * @retval AGESA_SUCCESS
+ * @retval AGESA_ERROR
+ */
+
+AGESA_STATUS
+PcieAlibBuildAcpiTableV2 (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT VOID **AlibSsdtPtr
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ UINTN Index;
+ VOID *AlibSsdtBuffer;
+ VOID *AlibSsdtTable;
+ UINTN AlibSsdtlength;
+ UINT32 AmlObjName;
+ VOID *AmlObjPtr;
+
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieAlibBuildAcpiTableV2 Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+ AlibSsdtTable = AlibGetBaseTableV2 (StdHeader);
+ AlibSsdtlength = ((ACPI_TABLE_HEADER*) AlibSsdtTable)->TableLength;
+ if (*AlibSsdtPtr == NULL) {
+ AlibSsdtBuffer = GnbAllocateHeapBuffer (
+ AMD_ACPI_ALIB_BUFFER_HANDLE,
+ AlibSsdtlength,
+ StdHeader
+ );
+ ASSERT (AlibSsdtBuffer != NULL);
+ if (AlibSsdtBuffer == NULL) {
+ return AGESA_ERROR;
+ }
+ *AlibSsdtPtr = AlibSsdtBuffer;
+ } else {
+ AlibSsdtBuffer = *AlibSsdtPtr;
+ }
+ // Check length of port data
+ ASSERT (sizeof (_ALIB_PORT_DATA) <= 20);
+ // Check length of global data
+ ASSERT (sizeof (_ALIB_GLOBAL_DATA) <= 32);
+ // Copy template to buffer
+ LibAmdMemCopy (AlibSsdtBuffer, AlibSsdtTable, AlibSsdtlength, StdHeader);
+ // Update table OEM fields.
+ LibAmdMemCopy (
+ (VOID *) &((ACPI_TABLE_HEADER*) AlibSsdtBuffer)->OemId,
+ (VOID *) &GnbBuildOptions.OemIdString,
+ sizeof (GnbBuildOptions.OemIdString),
+ StdHeader);
+ LibAmdMemCopy (
+ (VOID *) &((ACPI_TABLE_HEADER*) AlibSsdtBuffer)->OemTableId,
+ (VOID *) &GnbBuildOptions.OemTableIdString,
+ sizeof (GnbBuildOptions.OemTableIdString),
+ StdHeader);
+ //
+ // Update register base base
+ //
+ PcieAlibUpdateGnbData (AlibSsdtBuffer, StdHeader);
+ //
+ // Update transfer block
+ //
+ AmlObjName = STRING_TO_UINT32 ('A', 'D', 'A', 'T');
+ AmlObjPtr = GnbLibFind (AlibSsdtBuffer, AlibSsdtlength, (UINT8*) &AmlObjName, sizeof (AmlObjName));
+ if (AmlObjPtr != NULL) {
+ AmlObjPtr = (UINT8 *) AmlObjPtr + 10;
+ }
+ // Dispatch function from table
+ Index = 0;
+ while (AlibDispatchTableV2[Index] != NULL) {
+ Status = AlibDispatchTableV2[Index] (AmlObjPtr, StdHeader);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ Index++;
+ }
+ if (AgesaStatus != AGESA_SUCCESS) {
+ //Shrink table length to size of the header
+ ((ACPI_TABLE_HEADER*) AlibSsdtBuffer)->TableLength = sizeof (ACPI_TABLE_HEADER);
+ }
+ ChecksumAcpiTable ((ACPI_TABLE_HEADER*) AlibSsdtBuffer, StdHeader);
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieAlibBuildAcpiTableV2 Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Update MMIO info
+ *
+ *
+ *
+ *
+ * @param[in] SsdtBuffer Pointer to SSDT table
+ * @param[in] StdHeader Standard configuration header
+ */
+
+AGESA_STATUS
+PcieAlibUpdateGnbData (
+ IN OUT VOID *SsdtBuffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 LocalMsrRegister;
+ UINT32 AmlObjName;
+ VOID *AmlObjPtr;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieAlibUpdateGnbData Enter\n");
+ //
+ // Locate Base address variable
+ //
+ AmlObjName = STRING_TO_UINT32 ('A', 'G', 'R', 'B');
+ AmlObjPtr = GnbLibFind (
+ SsdtBuffer,
+ ((ACPI_TABLE_HEADER*) SsdtBuffer)->TableLength,
+ (UINT8*) &AmlObjName,
+ sizeof (AmlObjName)
+ );
+ /// @todo
+ // ASSERT (AmlObjPtr != NULL);
+ if (AmlObjPtr == NULL) {
+ return AGESA_ERROR;
+ }
+ //
+ // Update PCIe MMIO base
+ //
+ LibAmdMsrRead (MSR_MMIO_Cfg_Base, &LocalMsrRegister, StdHeader);
+ if ((LocalMsrRegister & BIT0) != 0 && (LocalMsrRegister & 0xFFFFFFFF00000000) == 0) {
+ *(UINT32*)((UINT8*) AmlObjPtr + 5) = (UINT32) (LocalMsrRegister & 0xFFFFF00000);
+ } else {
+ ASSERT (FALSE);
+ return AGESA_ERROR;
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieAlibUpdateGnbData Exit\n");
+ return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Update MMIO info
+ *
+ *
+ *
+ *
+ * @param[in] DataBuffer Pointer to data buffer
+ * @param[in] StdHeader Standard configuration header
+ */
+
+AGESA_STATUS
+PcieAlibUpdateVoltageData (
+ IN OUT VOID *DataBuffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PP_F1_ARRAY_V2 *PpF1Array;
+ AGESA_STATUS Status;
+ ALIB_DATA *AlibData;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieAlibUpdateVoltageData Enter\n");
+ Status = AGESA_SUCCESS;
+ ASSERT (DataBuffer != NULL);
+ AlibData = (ALIB_DATA *) DataBuffer;
+ //
+ // Locate F1 table
+ //
+ PpF1Array = GnbLocateHeapBuffer (AMD_PP_F1_TABLE_HANDLE, StdHeader);
+ ASSERT (PpF1Array != NULL);
+ if (PpF1Array != NULL) {
+ //
+ // Update GEN1 Vid
+ //
+ AlibData->Data.Data.PcieVidGen1 = PpF1Array->PP_FUSE_ARRAY_V2_fld32[0];
+ //
+ // Update GEN2 Vid
+ //
+ AlibData->Data.Data.PcieVidGen2 = PpF1Array->PP_FUSE_ARRAY_V2_fld32[PpF1Array->PcieGen2Vid];
+ //
+ // Update DPM Mask
+ //
+ AlibData->Data.Data.DpmMask = (PpF1Array->PP_FUSE_ARRAY_V2_fld37 + 1);
+ IDS_HDT_CONSOLE (GNB_TRACE, " DpmMask = %02x\n", AlibData->Data.Data.DpmMask);
+ //
+ // Update Boost data
+ //
+ AlibData->Data.Data.NumBoostStates = (PpF1Array->PP_FUSE_ARRAY_V2_fld36);
+ IDS_HDT_CONSOLE (GNB_TRACE, " NumBoost = %02x\n", AlibData->Data.Data.NumBoostStates);
+ } else {
+ Status = AGESA_ERROR;
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieAlibUpdateVoltageData Exit\n");
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Update PCIe info
+ *
+ *
+ *
+ *
+ * @param[in] DataBuffer Ponter to data buffer
+ * @param[in] StdHeader Standard configuration header
+ */
+
+AGESA_STATUS
+PcieAlibUpdatePcieData (
+ IN OUT VOID *DataBuffer,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCIe_PLATFORM_CONFIG *Pcie;
+ AMD_LATE_PARAMS *LateParamsPtr;
+ AGESA_STATUS Status;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieAlibUpdatePcieData Enter\n");
+ ASSERT (DataBuffer != NULL);
+ Status = AGESA_SUCCESS;
+ //
+ // Locate PCIe platform config
+ //
+ if (PcieLocateConfigurationData (StdHeader, &Pcie) == AGESA_SUCCESS) {
+ //
+ // Update policy data
+ //
+ ((ALIB_DATA *) DataBuffer)->Data.Data.PsppPolicy = Pcie->PsppPolicy;
+ //
+ // Update data for each port
+ //
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_PCIE_ENGINE,
+ PcieAlibUpdatePciePortDataCallback,
+ DataBuffer,
+ Pcie
+ );
+ } else {
+ ASSERT (FALSE);
+ Status = AGESA_FATAL;
+ }
+
+ LateParamsPtr = (AMD_LATE_PARAMS *) StdHeader;
+ ((ALIB_DATA *) DataBuffer)->Data.Data.DockedTdpHeadroom =
+ LateParamsPtr->GnbLateConfiguration.DockedTdpHeadroom;
+ IDS_HDT_CONSOLE (GNB_TRACE, " DockedTdpHeadroom = %02x\n",
+ LateParamsPtr->GnbLateConfiguration.DockedTdpHeadroom);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieAlibUpdatePcieData Exit\n");
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Callback to update PCIe port data
+ *
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Not used
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PcieAlibUpdatePciePortDataCallback (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ _ALIB_PORT_DATA *PortData;
+
+ PortData = &((ALIB_DATA *) Buffer)->PortData[Engine->Type.Port.PcieBridgeId].PortData;
+
+ if (PcieConfigIsEngineAllocated (Engine) && (Engine->Type.Port.PortData.LinkHotplug != HotplugDisabled || PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_TRAINING_SUCCESS))) {
+ //
+ // Various speed capability
+ //
+ PortData->PciePortMaxSpeed = (UINT8) PcieFmGetLinkSpeedCap (PCIE_PORT_GEN_CAP_MAX, Engine);
+ PortData->PciePortCurSpeed = (UINT8) PcieFmGetLinkSpeedCap (PCIE_PORT_GEN_CAP_BOOT, Engine);
+ PortData->PciePortDcSpeed = PcieGen1;
+ PortData->PciePortAcSpeed = PortData->PciePortMaxSpeed;
+ if (Pcie->PsppPolicy == PsppBalanceLow) {
+ PortData->PciePortAcSpeed = PcieGen1;
+ }
+ if (PcieConfigIsSbPcieEngine (Engine)) {
+ PortData->PcieSbPort = 0x1;
+ PortData->PciePortAcSpeed = PortData->PciePortMaxSpeed;
+ }
+ if (Engine->Type.Port.PortData.MiscControls.LinkSafeMode != 0) {
+ PortData->PcieLinkSafeMode = 0x1;
+ PortData->PcieLocalOverrideSpeed = Engine->Type.Port.PortData.MiscControls.LinkSafeMode;
+ }
+ //
+ // various port capability
+ //
+ PortData->StartPhyLane = (UINT8) Engine->EngineData.StartLane;
+ PortData->EndPhyLane = (UINT8) Engine->EngineData.EndLane;
+ PortData->StartCoreLane = (UINT8) Engine->Type.Port.StartCoreLane;
+ PortData->EndCoreLane = (UINT8) Engine->Type.Port.EndCoreLane;
+ PortData->PortId = Engine->Type.Port.PortId;
+ PortData->LinkHotplug = Engine->Type.Port.PortData.LinkHotplug;
+ PortData->PciDev = (UINT8) Engine->Type.Port.Address.Address.Device;
+ PortData->PciFun = (UINT8) Engine->Type.Port.Address.Address.Function;
+ } else {
+ PortData->PciePortMaxSpeed = PcieGen1;
+ PortData->PciePortCurSpeed = PcieGen1;
+ PortData->PciePortDcSpeed = PcieGen1;
+ PortData->PciePortAcSpeed = PcieGen1;
+ PortData->PcieLocalOverrideSpeed = PcieGen1;
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieAlibV2/PcieAlibV2.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieAlibV2/PcieAlibV2.h
new file mode 100644
index 0000000..322d7c43
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieAlibV2/PcieAlibV2.h
@@ -0,0 +1,107 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe ALIB
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84514 $ @e \$Date: 2012-12-17 10:44:17 -0600 (Mon, 17 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIEALIBV2_H_
+#define _PCIEALIBV2_H_
+
+#pragma pack (push, 1)
+
+/// _ALIB_PORT_DATA structure
+typedef struct {
+ UINT8 PciePortMaxSpeed; ///< Maximum speed for PCIe Port
+ UINT8 PciePortAcSpeed; ///< AC power speed for PCIe Port
+ UINT8 PciePortDcSpeed; ///< DC power speed for PCIe Port
+ UINT8 PciePortCurSpeed; ///< Current speed for PCIe Port
+ UINT8 PcieSbPort; ///< Sb Port
+ UINT8 PcieLinkSafeMode; ///< Link Safe Mode
+ UINT8 PcieLocalOverrideSpeed; ///< Local Override Speed
+ UINT8 StartPhyLane; ///< Start PHY lane
+ UINT8 EndPhyLane; ///< End PHY lane
+ UINT8 StartCoreLane; ///< Start CORE lane
+ UINT8 EndCoreLane; ///< End Core lane
+ UINT8 PortId; ///< Logical Port ID
+ UINT8 LinkHotplug; ///< Hotplug Flags
+ UINT8 PciDev; ///< PCI Device Number
+ UINT8 PciFun; ///< PCI Function Number
+} _ALIB_PORT_DATA;
+
+/// Set size for Port Data
+typedef union {
+ _ALIB_PORT_DATA PortData; ///< Port data for ALIB
+ UINT8 Padding[20]; ///< Padding size
+} ALIB_PORT_DATA;
+
+/// _ALIB_GLOBAL_DATA structure
+typedef struct {
+ UINT8 PsppPolicy; ///< PSPP Policy
+ UINT8 PcieVidGen1; ///< VID for Gen1
+ UINT8 PcieVidGen2; ///< VID for Gen2
+ UINT8 PcieVidGen3; ///< VID for Gen3
+ UINT8 DpmMask; ///< DPM Mask
+ UINT8 NumBoostStates; ///< DPM States
+ UINT8 DockedTdpHeadroom; ///< Docked TDP Headroom
+} _ALIB_GLOBAL_DATA;
+
+/// Set size for Global Data
+typedef union {
+ _ALIB_GLOBAL_DATA Data; ///< Global data struct for ALIB
+ UINT8 Padding[32]; ///< Padding size
+} ALIB_GLOBAL_DATA;
+
+/// ALIB_GLOBAL_DATA structure
+typedef struct {
+ ALIB_GLOBAL_DATA Data; ///< Global data struct for ALIB
+ ALIB_PORT_DATA PortData[12]; ///< Padding size
+} ALIB_DATA;
+
+
+#pragma pack (pop)
+
+AGESA_STATUS
+PcieAlibV2Feature (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieAspm/PcieAspm.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieAspm/PcieAspm.c
new file mode 100644
index 0000000..2233989
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieAspm/PcieAspm.c
@@ -0,0 +1,374 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe link ASPM
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "OptionGnb.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieInitLibV1.h"
+#include "PcieAspmBlackList.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEASPM_PCIEASPM_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef struct {
+ GNB_PCI_SCAN_DATA ScanData;
+ PCIE_ASPM_TYPE Aspm;
+ PCI_ADDR DownstreamPort;
+ BOOLEAN AspmL0sBlackList;
+} PCIE_ASPM_DATA;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+SCAN_STATUS
+PcieAspmCallback (
+ IN PCI_ADDR Device,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ );
+
+VOID
+excel950_fun0 (
+ IN PCI_ADDR Downstream,
+ IN PCI_ADDR Upstream,
+ IN PCIE_ASPM_TYPE Aspm,
+ IN OUT BOOLEAN *AspmL0sBlackList,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+PCIE_ASPM_TYPE
+excel950_fun1 (
+ IN PCI_ADDR Device,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+excel950_fun2 (
+ IN PCI_ADDR DownstreamPort,
+ IN PCIE_ASPM_TYPE Aspm,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCIE_ASPM_DATA PcieAspmData;
+ PcieAspmData.Aspm = Aspm;
+ PcieAspmData.ScanData.StdHeader = StdHeader;
+ PcieAspmData.ScanData.GnbScanCallback = PcieAspmCallback;
+ PcieAspmData.AspmL0sBlackList = FALSE;
+ GnbLibPciScan (DownstreamPort, DownstreamPort, &PcieAspmData.ScanData);
+}
+
+AGESA_STATUS
+PcieAspmInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Evaluate device
+ *
+ *
+ *
+ * @param[in] Device PCI Address
+ * @param[in,out] ScanData Scan configuration data
+ * @retval Scan Status of 0
+ */
+
+SCAN_STATUS
+PcieAspmCallback (
+ IN PCI_ADDR Device,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ )
+{
+ SCAN_STATUS ScanStatus;
+ PCIE_ASPM_DATA *PcieAspmData;
+ PCIE_DEVICE_TYPE DeviceType;
+ ScanStatus = SCAN_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, " PcieAspmCallback for Device = %d:%d:%d\n",
+ Device.Address.Bus,
+ Device.Address.Device,
+ Device.Address.Function
+ );
+ PcieAspmData = (PCIE_ASPM_DATA *) ScanData;
+ ScanStatus = SCAN_SUCCESS;
+ DeviceType = GnbLibGetPcieDeviceType (Device, ScanData->StdHeader);
+ switch (DeviceType) {
+ case PcieDeviceRootComplex:
+ case PcieDeviceDownstreamPort:
+ PcieAspmData->DownstreamPort = Device;
+ //PcieExitLatencyData->LinkCount++;
+ GnbLibPciRMW (Device.AddressValue | 0x18, AccessS3SaveWidth32, 0xffffffffull, 0x0, ScanData->StdHeader);
+ GnbLibPciScanSecondaryBus (Device, &PcieAspmData->ScanData);
+ //PcieExitLatencyData->LinkCount--;
+
+ //Pcie ASPM Black List for L0s with HW method change
+ if ((DeviceType == PcieDeviceRootComplex) && (PcieAspmData->AspmL0sBlackList == TRUE)) {
+ IDS_HDT_CONSOLE (GNB_TRACE, " Black List L0s disabled = %d:%d:%d\n", Device.Address.Bus, Device.Address.Device, Device.Address.Function);
+ GnbLibPciIndirectRMW (Device.AddressValue | 0xE0, 0xA0, AccessS3SaveWidth32, 0xfffff0ff, 0, ScanData->StdHeader);
+ }
+ break;
+ case PcieDeviceUpstreamPort:
+ excel950_fun0 (
+ PcieAspmData->DownstreamPort,
+ Device,
+ PcieAspmData->Aspm,
+ &PcieAspmData->AspmL0sBlackList,
+ ScanData->StdHeader
+ );
+ GnbLibPciRMW (Device.AddressValue | 0x18, AccessS3SaveWidth32, 0xffffffffull, 0x0, ScanData->StdHeader);
+ GnbLibPciScanSecondaryBus (Device, &PcieAspmData->ScanData);
+ ScanStatus = SCAN_SKIP_FUNCTIONS | SCAN_SKIP_DEVICES | SCAN_SKIP_BUSES;
+ break;
+ case PcieDeviceEndPoint:
+ case PcieDeviceLegacyEndPoint:
+ excel950_fun0 (
+ PcieAspmData->DownstreamPort,
+ Device,
+ PcieAspmData->Aspm,
+ &PcieAspmData->AspmL0sBlackList,
+ ScanData->StdHeader
+ );
+ ScanStatus = SCAN_SKIP_FUNCTIONS | SCAN_SKIP_DEVICES | SCAN_SKIP_BUSES;
+ break;
+ default:
+ break;
+ }
+ return ScanStatus;
+}
+
+VOID
+excel950_fun4 (
+ IN PCI_ADDR Function,
+ IN PCIE_ASPM_TYPE Aspm,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 PcieCapPtr;
+ PcieCapPtr = GnbLibFindPciCapability (Function.AddressValue, PCIE_CAP_ID, StdHeader);
+ if (PcieCapPtr != 0) {
+ GnbLibPciRMW (
+ Function.AddressValue | (PcieCapPtr + PCIE_LINK_CTRL_REGISTER) ,
+ AccessS3SaveWidth8,
+ (UINT32)~(BIT0 | BIT1),
+ Aspm,
+ StdHeader
+ );
+ }
+}
+
+STATIC VOID
+excel950_fun5 (
+ IN PCI_ADDR Device,
+ IN PCIE_ASPM_TYPE Aspm,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 MaxFunc;
+ UINT8 CurrentFunc;
+ MaxFunc = GnbLibPciIsMultiFunctionDevice (Device.AddressValue, StdHeader) ? 7 : 0;
+ for (CurrentFunc = 0; CurrentFunc <= MaxFunc; CurrentFunc++) {
+ Device.Address.Function = CurrentFunc;
+ if (GnbLibPciIsDevicePresent (Device.AddressValue, StdHeader)) {
+ excel950_fun4 (Device, Aspm, StdHeader);
+ }
+ }
+}
+
+VOID
+excel950_fun0 (
+ IN PCI_ADDR Downstream,
+ IN PCI_ADDR Upstream,
+ IN PCIE_ASPM_TYPE Aspm,
+ IN OUT BOOLEAN *AspmL0sBlackList,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCIe_LINK_ASPM LinkAsmp;
+ PCIE_ASPM_TYPE DownstreamCap;
+ PCIE_ASPM_TYPE UpstreamCap;
+ LinkAsmp.DownstreamPort = Downstream;
+ DownstreamCap = excel950_fun1 (Downstream, StdHeader);
+ LinkAsmp.UpstreamPort = Upstream;
+ UpstreamCap = excel950_fun1 (Upstream, StdHeader);
+ LinkAsmp.DownstreamAspm = DownstreamCap & UpstreamCap & Aspm & AspmL1;
+ LinkAsmp.UpstreamAspm = LinkAsmp.DownstreamAspm;
+ LinkAsmp.RequestedAspm = Aspm;
+ if ((UpstreamCap & Aspm & AspmL0s) != 0) {
+ LinkAsmp.UpstreamAspm |= AspmL0s;
+ }
+ if ((DownstreamCap & Aspm & AspmL0s) != 0) {
+ LinkAsmp.DownstreamAspm |= AspmL0s;
+ }
+ if (GnbBuildOptions.PcieAspmBlackListEnable == 1) {
+ PcieAspmBlackListFeature (&LinkAsmp, StdHeader);
+ if ((LinkAsmp.DownstreamAspm & AspmL0s) == 0) {
+ *AspmL0sBlackList = LinkAsmp.BlackList;
+ }
+ }
+ //AgesaPcieLinkAspm (&LinkAsmp, StdHeader);
+ IDS_HDT_CONSOLE (GNB_TRACE, " Set ASPM [%d] for Device = %d:%d:%d\n",
+ (LinkAsmp.UpstreamAspm) ,
+ LinkAsmp.UpstreamPort.Address.Bus,
+ LinkAsmp.UpstreamPort.Address.Device,
+ LinkAsmp.UpstreamPort.Address.Function
+ );
+ IDS_HDT_CONSOLE (GNB_TRACE, " Set ASPM [%d] for Device = %d:%d:%d\n",
+ (LinkAsmp.DownstreamAspm) ,
+ LinkAsmp.DownstreamPort.Address.Bus,
+ LinkAsmp.DownstreamPort.Address.Device,
+ LinkAsmp.DownstreamPort.Address.Function
+ );
+ // Disable ASPM Upstream component
+ excel950_fun5 (Upstream, AspmDisabled, StdHeader);
+ // Enable ASPM Donstream component
+ excel950_fun4 (Downstream, LinkAsmp.DownstreamAspm, StdHeader);
+ // Enable ASPM Upstream component
+ excel950_fun5 (Upstream, LinkAsmp.UpstreamAspm, StdHeader);
+}
+
+
+
+PCIE_ASPM_TYPE
+excel950_fun1 (
+ IN PCI_ADDR Device,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 PcieCapPtr;
+ UINT32 Value;
+ PcieCapPtr = GnbLibFindPciCapability (Device.AddressValue, PCIE_CAP_ID, StdHeader);
+ if (PcieCapPtr == 0) {
+ return 0;
+ }
+ GnbLibPciRead (
+ Device.AddressValue | (PcieCapPtr + PCIE_LINK_CAP_REGISTER),
+ AccessWidth32,
+ &Value,
+ StdHeader
+ );
+ return (Value >> 10) & 3;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Callback to init various features on all active ports
+ *
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Not used
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PcieAspmPortInitCallback (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ if (Engine->Type.Port.PortData.LinkAspm != AspmDisabled &&
+ !PcieConfigIsSbPcieEngine (Engine) &&
+ PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_TRAINING_SUCCESS)) {
+ excel950_fun2 (
+ Engine->Type.Port.Address,
+ Engine->Type.Port.PortData.LinkAspm,
+ GnbLibGetHeader (Pcie)
+ );
+ }
+}
+
+
+/**----------------------------------------------------------------------------------------*/
+/**
+ * Interface to enable Clock Power Managment
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ *
+ * @retval AGESA_STATUS
+ */
+ /*----------------------------------------------------------------------------------------*/
+AGESA_STATUS
+PcieAspmInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieAspmInterface Enter\n");
+ AgesaStatus = PcieLocateConfigurationData (StdHeader, &Pcie);
+ if (AgesaStatus == AGESA_SUCCESS) {
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_PCIE_ENGINE,
+ PcieAspmPortInitCallback,
+ NULL,
+ Pcie
+ );
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieAspmInterface Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieAspm/PcieAspm.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieAspm/PcieAspm.h
new file mode 100644
index 0000000..1424a90
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieAspm/PcieAspm.h
@@ -0,0 +1,63 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe link ASPM
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIEASPM_H_
+#define _PCIEASPM_H_
+
+VOID
+excel950_fun2 (
+ IN PCI_ADDR DownstreamPort,
+ IN PCIE_ASPM_TYPE Aspm,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+excel950_fun4 (
+ IN PCI_ADDR Function,
+ IN PCIE_ASPM_TYPE Aspm,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieClkPm/PcieClkPm.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieClkPm/PcieClkPm.c
new file mode 100644
index 0000000..64f01c0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieClkPm/PcieClkPm.c
@@ -0,0 +1,326 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe Clock Power Managment
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "PcieClkPm.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIECLKPM_PCIECLKPM_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable Clock Power Managment on function of the device
+ *
+ *
+ *
+ * @param[in] Function PCI address of function.
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+ /*----------------------------------------------------------------------------------------*/
+STATIC VOID
+PcieClkPmEnableOnFunction (
+ IN PCI_ADDR Function,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 PcieCapPtr;
+ PcieCapPtr = GnbLibFindPciCapability (Function.AddressValue, PCIE_CAP_ID, StdHeader);
+ if (PcieCapPtr != 0) {
+ GnbLibPciRMW (
+ Function.AddressValue | (PcieCapPtr + PCIE_LINK_CTRL_REGISTER),
+ AccessS3SaveWidth32,
+ (UINT32)~(BIT8),
+ BIT8,
+ StdHeader
+ );
+ }
+}
+
+
+/**----------------------------------------------------------------------------------------*/
+/**
+ * check capability of intire device including its functions
+ *
+ *
+ *
+ * @param[in] Device PCI address of downstream port
+ * @param[in] StdHeader Standard configuration header
+ *
+ * @retval TRUE - Device support Clock Power Managment
+ */
+ /*----------------------------------------------------------------------------------------*/
+STATIC BOOLEAN
+PcieClkPmCheckDeviceCapability (
+ IN PCI_ADDR Device,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ UINT8 MaxFunc;
+ UINT8 CurrentFunc;
+ UINT8 PcieCapPtr;
+ UINT32 Value;
+
+ MaxFunc = GnbLibPciIsMultiFunctionDevice (Device.AddressValue, StdHeader) ? 7 : 0;
+
+ for (CurrentFunc = 0; CurrentFunc <= MaxFunc; CurrentFunc++) {
+ Device.Address.Function = CurrentFunc;
+ if (GnbLibPciIsDevicePresent (Device.AddressValue, StdHeader)) {
+ PcieCapPtr = GnbLibFindPciCapability (Device.AddressValue, PCIE_CAP_ID, StdHeader);
+ if (PcieCapPtr == 0) {
+ return FALSE;
+ }
+ GnbLibPciRead (
+ Device.AddressValue | (PcieCapPtr + PCIE_LINK_CAP_REGISTER),
+ AccessWidth32,
+ &Value,
+ StdHeader
+ );
+ if ((Value & BIT18) == 0) {
+ return FALSE;
+ }
+ }
+ }
+ return TRUE;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set Clock power managment on device
+ *
+ *
+ *
+ * @param[in] Device PCI address of device.
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+ /*----------------------------------------------------------------------------------------*/
+STATIC VOID
+PcieClkPmEnableOnDevice (
+ IN PCI_ADDR Device,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 MaxFunc;
+ UINT8 CurrentFunc;
+ if (PcieClkPmCheckDeviceCapability (Device, StdHeader)) {
+ MaxFunc = GnbLibPciIsMultiFunctionDevice (Device.AddressValue, StdHeader) ? 7 : 0;
+ for (CurrentFunc = 0; CurrentFunc <= MaxFunc; CurrentFunc++) {
+ Device.Address.Function = CurrentFunc;
+ if (GnbLibPciIsDevicePresent (Device.AddressValue, StdHeader)) {
+ IDS_HDT_CONSOLE (GNB_TRACE, " Enable Clock Power Managment for Device = %d:%d:%d\n",
+ Device.Address.Bus,
+ Device.Address.Device,
+ Device.Address.Function
+ );
+ PcieClkPmEnableOnFunction (Device, StdHeader);
+ }
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Evaluate device
+ *
+ *
+ *
+ * @param[in] Device PCI Address
+ * @param[in,out] ScanData Scan configuration data
+ * @retval Scan Status of 0
+ */
+
+STATIC SCAN_STATUS
+PcieClkPmCallback (
+ IN PCI_ADDR Device,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ )
+{
+ SCAN_STATUS ScanStatus;
+ PCIE_DEVICE_TYPE DeviceType;
+ ScanStatus = SCAN_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, " PcieClkPmCallback for Device = %d:%d:%d\n",
+ Device.Address.Bus,
+ Device.Address.Device,
+ Device.Address.Function
+ );
+ ScanStatus = SCAN_SUCCESS;
+ DeviceType = GnbLibGetPcieDeviceType (Device, ScanData->StdHeader);
+ switch (DeviceType) {
+ case PcieDeviceRootComplex:
+ case PcieDeviceDownstreamPort:
+ GnbLibPciRMW (Device.AddressValue | 0x18, AccessS3SaveWidth32, 0xffffffffull, 0x0, ScanData->StdHeader);
+ GnbLibPciScanSecondaryBus (Device, ScanData);
+ break;
+ case PcieDeviceUpstreamPort:
+ PcieClkPmEnableOnDevice (Device, ScanData->StdHeader);
+ GnbLibPciRMW (Device.AddressValue | 0x18, AccessS3SaveWidth32, 0xffffffffull, 0x0, ScanData->StdHeader);
+ GnbLibPciScanSecondaryBus (Device, ScanData);
+ ScanStatus = SCAN_SKIP_FUNCTIONS | SCAN_SKIP_DEVICES | SCAN_SKIP_BUSES;
+ break;
+ case PcieDeviceEndPoint:
+ case PcieDeviceLegacyEndPoint:
+ PcieClkPmEnableOnDevice (Device, ScanData->StdHeader);
+ ScanStatus = SCAN_SKIP_FUNCTIONS | SCAN_SKIP_DEVICES | SCAN_SKIP_BUSES;
+ break;
+ default:
+ break;
+ }
+ return ScanStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Confiugure Clock Power Managment
+ *
+ *
+ *
+ *
+ * @param[in] DownstreamPort Downstream port PCI address
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+
+VOID
+STATIC
+PcieClkPmPortInitConfigure (
+ IN PCI_ADDR DownstreamPort,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GNB_PCI_SCAN_DATA ScanData;
+ ScanData.StdHeader = StdHeader;
+ ScanData.GnbScanCallback = PcieClkPmCallback;
+ GnbLibPciScan (DownstreamPort, DownstreamPort, &ScanData);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Callback to init various features on all active ports
+ *
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Not used
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PcieClkPmPortInitCallback (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ if (Engine->Type.Port.PortData.MiscControls.ClkPmSupport == 0x1 &&
+ !PcieConfigIsSbPcieEngine (Engine) &&
+ PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_TRAINING_SUCCESS)) {
+ PcieClkPmPortInitConfigure (
+ Engine->Type.Port.Address,
+ GnbLibGetHeader (Pcie)
+ );
+ }
+}
+
+/**----------------------------------------------------------------------------------------*/
+/**
+ * Interface to enable Clock Power Managment
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ *
+ * @retval AGESA_STATUS
+ */
+ /*----------------------------------------------------------------------------------------*/
+AGESA_STATUS
+PcieClkPmInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieClkPmInterface Enter\n");
+ AgesaStatus = PcieLocateConfigurationData (StdHeader, &Pcie);
+ if (AgesaStatus == AGESA_SUCCESS) {
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_PCIE_ENGINE,
+ PcieClkPmPortInitCallback,
+ NULL,
+ Pcie
+ );
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieClkPmInterface Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieClkPm/PcieClkPm.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieClkPm/PcieClkPm.h
new file mode 100644
index 0000000..fe054f5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieClkPm/PcieClkPm.h
@@ -0,0 +1,54 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe link ASPM
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIECLKPM_H_
+#define _PCIECLKPM_H_
+
+AGESA_STATUS
+PcieClkPmInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/GnbHandleLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/GnbHandleLib.c
new file mode 100644
index 0000000..d498ad0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/GnbHandleLib.c
@@ -0,0 +1,135 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB function to create/locate PCIe configuration data area
+ *
+ * Contain code that create/locate/manes GNB/PCIe configuration
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIECONFIG_GNBHANDLELIB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get GNB handle
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ */
+GNB_HANDLE *
+GnbGetHandle (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCIe_PLATFORM_CONFIG *Pcie;
+ GNB_HANDLE *GnbHandle;
+ AGESA_STATUS Status;
+ GnbHandle = NULL;
+ Status = PcieLocateConfigurationData (StdHeader, &Pcie);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ GnbHandle = (GNB_HANDLE *) PcieConfigGetChild (DESCRIPTOR_SILICON, &Pcie->Header);
+ }
+ return GnbHandle;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get GNB socket ID
+ *
+ *
+ * @param[in] GnbHandle Gnb handle
+ */
+UINT8
+GnbGetSocketId (
+ IN GNB_HANDLE *GnbHandle
+ )
+{
+ return PcieConfigGetParentComplex (GnbHandle)->SocketId;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Get PCI_ADDR of GNB
+ *
+ *
+ * @param[in] Handle Pointer to GNB_HANDLE
+ * @retval PCI_ADDR PCI_ADDR of device
+ */
+
+PCI_ADDR
+GnbGetHostPciAddress (
+ IN GNB_HANDLE *Handle
+ )
+{
+ ASSERT (Handle != NULL);
+ return Handle->Address;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/GnbHandleLib.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/GnbHandleLib.h
new file mode 100644
index 0000000..8fc9847
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/GnbHandleLib.h
@@ -0,0 +1,74 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB function to create/locate PCIe configuration data area
+ *
+ * Contain code that create/locate and rebase configuration data area.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBHANDLELIB_H_
+#define _GNBHANDLELIB_H_
+
+
+GNB_HANDLE *
+GnbGetHandle (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GnbGetSocketId (
+ IN GNB_HANDLE *GnbHandle
+ );
+
+PCI_ADDR
+GnbGetHostPciAddress (
+ IN GNB_HANDLE *Handle
+ );
+
+
+#define GnbGetNextHandle(Descriptor) (GNB_HANDLE *) PcieConfigGetNextTopologyDescriptor (Descriptor, DESCRIPTOR_TERMINATE_TOPOLOGY)
+
+#define GnbGetSiliconId(Handle) (Handle != NULL ? (Handle)->SiliconId : 0)
+#define GnbGetNodeId(Handle) (Handle != NULL ? (Handle)->NodeId : 0)
+
+#define GnbIsGnbConnectedToSb(Handle) (Handle != NULL ? ((Handle)->Address.AddressValue == 0x0) : FALSE)
+
+#endif
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/GnbPcieConfig.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/GnbPcieConfig.h
new file mode 100644
index 0000000..d216c79
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/GnbPcieConfig.h
@@ -0,0 +1,54 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe configuration
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _GNBPCIECONFIG_H_
+#define _GNBPCIECONFIG_H_
+
+#include "GnbPcie.h"
+#include "PcieConfigData.h"
+#include "PcieConfigLib.h"
+#include "GnbHandleLib.h"
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieConfigData.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieConfigData.c
new file mode 100644
index 0000000..5a25844
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieConfigData.c
@@ -0,0 +1,533 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB function to create/locate PCIe configuration data area
+ *
+ * Contain code that create/locate and rebase configuration data area.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "OptionGnb.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbFamServices.h"
+#include "cpuServices.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "PcieMapTopology.h"
+#include "PcieInputParser.h"
+#include "PcieConfigLib.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIECONFIG_PCIECONFIGDATA_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+extern GNB_BUILD_OPTIONS ROMDATA GnbBuildOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+#define PcieConfigAttachChild(P, C) (P)->Child = (UINT16) ((UINT8 *) C - (UINT8 *) P);
+#define PcieConfigAttachParent(P, C) (C)->Parent = (UINT16) ((UINT8 *) C - (UINT8 *) P);
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+PcieConfigAttachComplexes (
+ IN OUT PCIe_COMPLEX_CONFIG *Base,
+ IN OUT PCIe_COMPLEX_CONFIG *New
+ );
+
+AGESA_STATUS
+PcieUpdateConfigurationData (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+PCIe_COMPLEX_DESCRIPTOR *
+PcieConfigProcessUserConfig (
+ IN PCIe_COMPLEX_DESCRIPTOR *PcieComplexList,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+PcieConfigurationInit (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+PcieConfigurationMap (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Create internal PCIe configuration topology
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_SUCCESS Configuration data successfully allocated.
+ * @retval AGESA_FATAL Configuration data allocation failed.
+ */
+
+AGESA_STATUS
+PcieConfigurationInit (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ AGESA_STATUS Status;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_SILICON_CONFIG *Silicon;
+ UINT8 SocketId;
+ UINTN CurrentComplexesDataLength;
+ UINTN ComplexesDataLength;
+ UINT8 ComplexIndex;
+ VOID *Buffer;
+ ComplexesDataLength = 0;
+ Status = AGESA_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieConfigurationInit Enter\n");
+ for (SocketId = 0; SocketId < GetPlatformNumberOfSockets (); SocketId++) {
+ if (IsProcessorPresent (SocketId, StdHeader)) {
+ Status = PcieFmGetComplexDataLength (SocketId, &CurrentComplexesDataLength, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ ComplexesDataLength += CurrentComplexesDataLength;
+ }
+ }
+ ComplexIndex = 0;
+ Pcie = GnbAllocateHeapBufferAndClear (AMD_PCIE_COMPLEX_DATA_HANDLE, sizeof (PCIe_PLATFORM_CONFIG) + ComplexesDataLength, StdHeader);
+ ASSERT (Pcie != NULL);
+ if (Pcie != NULL) {
+ PcieConfigAttachChild (&Pcie->Header, &Pcie->ComplexList[ComplexIndex].Header);
+ PcieConfigSetDescriptorFlags (Pcie, DESCRIPTOR_PLATFORM | DESCRIPTOR_TERMINATE_LIST | DESCRIPTOR_TERMINATE_TOPOLOGY);
+ Buffer = (UINT8 *) (Pcie) + sizeof (PCIe_PLATFORM_CONFIG);
+ for (SocketId = 0; SocketId < GetPlatformNumberOfSockets (); SocketId++) {
+ if (IsProcessorPresent (SocketId, StdHeader)) {
+ Pcie->ComplexList[ComplexIndex].SocketId = SocketId;
+ //Attache Comples to Silicon which will be created by PcieFmBuildComplexConfiguration
+ PcieConfigAttachChild (&Pcie->ComplexList[ComplexIndex].Header, &((PCIe_SILICON_CONFIG *) Buffer)->Header);
+ //Attach Comples to Pcie
+ PcieConfigAttachParent (&Pcie->Header, &Pcie->ComplexList[ComplexIndex].Header);
+ PcieConfigSetDescriptorFlags (&Pcie->ComplexList[ComplexIndex], DESCRIPTOR_COMPLEX | DESCRIPTOR_TERMINATE_LIST | DESCRIPTOR_TERMINATE_GNB | DESCRIPTOR_TERMINATE_TOPOLOGY);
+ PcieFmBuildComplexConfiguration (SocketId, Buffer, StdHeader);
+ Silicon = PcieConfigGetChildSilicon (&Pcie->ComplexList[ComplexIndex]);
+ while (Silicon != NULL) {
+ PcieConfigAttachParent (&Pcie->ComplexList[ComplexIndex].Header, &Silicon->Header);
+ GetNodeId (SocketId, Silicon->SiliconId, &Silicon->NodeId, StdHeader);
+ GnbFmGetLinkId ((GNB_HANDLE*) Silicon, &Silicon->LinkId, StdHeader);
+ Silicon = (PCIe_SILICON_CONFIG *) PcieConfigGetNextTopologyDescriptor (Silicon, DESCRIPTOR_TERMINATE_TOPOLOGY);
+ }
+
+ if (ComplexIndex > 0) {
+ PcieConfigAttachComplexes (&Pcie->ComplexList[ComplexIndex - 1], &Pcie->ComplexList[ComplexIndex]);
+ }
+ PcieFmGetComplexDataLength (SocketId, &CurrentComplexesDataLength, StdHeader);
+ Buffer = (VOID *) ((UINT8 *) Buffer + CurrentComplexesDataLength);
+ ComplexIndex++;
+ }
+ }
+ } else {
+ Status = AGESA_FATAL;
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieConfigurationInit Exit [0x%x]\n", Status);
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Create internal PCIe configuration topology
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_SUCCESS Configuration data successfully allocated.
+ * @retval AGESA_FATAL Configuration data allocation failed.
+ */
+
+AGESA_STATUS
+PcieConfigurationMap (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AMD_EARLY_PARAMS *EarlyParamsPtr;
+ PCIe_COMPLEX_DESCRIPTOR *PcieComplexList;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ PCIe_COMPLEX_CONFIG *Complex;
+ PCIe_COMPLEX_DESCRIPTOR *ComplexDescriptor;
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ UINTN Index;
+ UINTN NumberOfComplexes;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieConfigurationMap Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+ EarlyParamsPtr = (AMD_EARLY_PARAMS *) StdHeader;
+ PcieComplexList = PcieConfigProcessUserConfig (EarlyParamsPtr->GnbConfig.PcieComplexList, StdHeader);
+ GNB_DEBUG_CODE (
+ if (PcieComplexList != NULL) {
+ PcieUserConfigConfigDump (PcieComplexList);
+ }
+ );
+ Status = PcieLocateConfigurationData (StdHeader, &Pcie);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status == AGESA_SUCCESS) {
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetChild (DESCRIPTOR_COMPLEX, &Pcie->Header);
+ NumberOfComplexes = PcieInputParserGetNumberOfComplexes (PcieComplexList);
+ while (Complex != NULL) {
+ for (Index = 0; Index < NumberOfComplexes; Index++) {
+ ComplexDescriptor = PcieInputParserGetComplexDescriptor (PcieComplexList, Index);
+ if (ComplexDescriptor->SocketId == Complex->SocketId) {
+ Status = PcieMapTopologyOnComplex (ComplexDescriptor, Complex, Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ }
+ }
+ Complex = PcieLibGetNextDescriptor (Complex);
+ }
+ }
+ Pcie->LinkReceiverDetectionPooling = GnbBuildOptions.CfgGnbLinkReceiverDetectionPooling;
+ Pcie->LinkL0Pooling = GnbBuildOptions.CfgGnbLinkL0Pooling;
+ Pcie->LinkGpioResetAssertionTime = GnbBuildOptions.CfgGnbLinkGpioResetAssertionTime;
+ Pcie->LinkResetToTrainingTime = GnbBuildOptions.CfgGnbLinkResetToTrainingTime;
+ Pcie->GfxCardWorkaround = GfxWorkaroundEnable;
+ Pcie->TrainingExitState = LinkStateTrainingCompleted;
+ Pcie->TrainingAlgorithm = GnbBuildOptions.CfgGnbTrainingAlgorithm;
+ if ((UserOptions.CfgAmdPlatformType & AMD_PLATFORM_MOBILE) != 0) {
+ Pcie->GfxCardWorkaround = GfxWorkaroundDisable;
+ }
+ Pcie->PsppPolicy = EarlyParamsPtr->GnbConfig.PsppPolicy;
+ IDS_OPTION_CALLOUT (IDS_CALLOUT_GNB_PCIE_PLATFORM_CONFIG, Pcie, StdHeader);
+ GNB_DEBUG_CODE (
+ PcieConfigDebugDump (Pcie);
+ );
+ HeapDeallocateBuffer (AMD_GNB_TEMP_DATA_HANDLE, StdHeader);
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieConfigurationMap Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Locate global PCIe configuration data
+ *
+ *
+ *
+ * @param[in] PcieComplexList User PCIe topology configuration
+ * @param[out] StdHeader Standard configuration header
+ * @retval Updated topology configuration
+ */
+PCIe_COMPLEX_DESCRIPTOR *
+PcieConfigProcessUserConfig (
+ IN PCIe_COMPLEX_DESCRIPTOR *PcieComplexList,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Node0SocketId;
+ UINT32 Node0SiliconId;
+ UINTN NumberOfComplexes;
+ UINTN NumberOfPorts;
+ UINTN Index;
+ UINT16 DescriptorLoLane;
+ UINT16 DescriptorHiLane;
+ PCIe_COMPLEX_DESCRIPTOR *ResultComplexConfig;
+ PCIe_COMPLEX_DESCRIPTOR *SbComplexDescriptor;
+ PCIe_PORT_DESCRIPTOR *SbPortDescriptor;
+ PCIe_PORT_DESCRIPTOR DefaultSbPortDescriptor;
+ PCIe_ENGINE_DESCRIPTOR *EngineDescriptor;
+ AGESA_STATUS Status;
+ SbPortDescriptor = NULL;
+ GetSocketModuleOfNode (0, &Node0SocketId, &Node0SiliconId, StdHeader);
+ Status = PcieFmGetSbConfigInfo ((UINT8) Node0SocketId, &DefaultSbPortDescriptor, StdHeader);
+ if (Status == AGESA_UNSUPPORTED) {
+ return PcieComplexList;
+ }
+ if (PcieComplexList == NULL) {
+ // No complex descriptor for any silicon was provided
+ // 1. Create complex descriptor
+ // 2. Create SB port descriptor
+ // 3. Attach SB descriptor to complex descriptor created in step #1
+ ResultComplexConfig = (PCIe_COMPLEX_DESCRIPTOR *) GnbAllocateHeapBufferAndClear (
+ AMD_GNB_TEMP_DATA_HANDLE,
+ sizeof (PCIe_COMPLEX_DESCRIPTOR) + sizeof (PCIe_PORT_DESCRIPTOR),
+ StdHeader
+ );
+ SbComplexDescriptor = ResultComplexConfig;
+ SbPortDescriptor = (PCIe_PORT_DESCRIPTOR *) ((UINT8 *) ResultComplexConfig + sizeof (PCIe_COMPLEX_DESCRIPTOR));
+ LibAmdMemCopy (SbPortDescriptor, &DefaultSbPortDescriptor, sizeof (PCIe_PORT_DESCRIPTOR), StdHeader);
+ SbPortDescriptor->Flags |= DESCRIPTOR_TERMINATE_LIST;
+ // Attach post array to complex descriptor
+ SbComplexDescriptor->PciePortList = SbPortDescriptor;
+ SbComplexDescriptor->SocketId = Node0SocketId;
+ SbComplexDescriptor->Flags |= DESCRIPTOR_TERMINATE_LIST;
+ } else {
+ NumberOfComplexes = PcieInputParserGetNumberOfComplexes (PcieComplexList);
+ SbComplexDescriptor = PcieInputParserGetComplexDescriptorOfSocket (PcieComplexList, Node0SocketId);
+ if (SbComplexDescriptor == NULL) {
+ // No complex descriptor for silicon that have SB attached.
+ // 1. Create complex descriptor. Will be first one in the list
+ // 2. Create SB port descriptor
+ // 3. Attach SB descriptor to complex descriptor created in step #1
+ ResultComplexConfig = (PCIe_COMPLEX_DESCRIPTOR *) GnbAllocateHeapBufferAndClear (
+ AMD_GNB_TEMP_DATA_HANDLE,
+ (NumberOfComplexes + 1) * sizeof (PCIe_COMPLEX_DESCRIPTOR) + sizeof (PCIe_PORT_DESCRIPTOR),
+ StdHeader
+ );
+ SbComplexDescriptor = ResultComplexConfig;
+ SbPortDescriptor = (PCIe_PORT_DESCRIPTOR *) ((UINT8 *) ResultComplexConfig + (NumberOfComplexes + 1) * sizeof (PCIe_COMPLEX_DESCRIPTOR));
+ LibAmdMemCopy (SbPortDescriptor, &DefaultSbPortDescriptor, sizeof (PCIe_PORT_DESCRIPTOR), StdHeader);
+ SbPortDescriptor->Flags |= DESCRIPTOR_TERMINATE_LIST;
+ // Attach post array to complex descriptor
+ SbComplexDescriptor->PciePortList = SbPortDescriptor;
+ SbComplexDescriptor->SocketId = Node0SocketId;
+ SbComplexDescriptor->Flags |= DESCRIPTOR_TERMINATE_LIST;
+ LibAmdMemCopy (
+ (UINT8 *) ResultComplexConfig + sizeof (PCIe_COMPLEX_DESCRIPTOR),
+ PcieComplexList,
+ NumberOfComplexes * sizeof (PCIe_COMPLEX_DESCRIPTOR),
+ StdHeader
+ );
+
+ } else {
+ // Complex descriptor that represent silicon that have SB attached exist
+ // 1. Determine if complex have descriptor for SB
+ // 2. Create new descriptor for SB if needed
+ NumberOfPorts = PcieInputParserGetLengthOfPcieEnginesList (SbComplexDescriptor);
+ ResultComplexConfig = (PCIe_COMPLEX_DESCRIPTOR *) GnbAllocateHeapBuffer (
+ AMD_GNB_TEMP_DATA_HANDLE,
+ NumberOfComplexes * sizeof (PCIe_COMPLEX_DESCRIPTOR) + (NumberOfPorts + 1) * sizeof (PCIe_PORT_DESCRIPTOR),
+ StdHeader
+ );
+ // Copy complex descriptor array
+ LibAmdMemCopy (
+ ResultComplexConfig,
+ PcieComplexList,
+ NumberOfComplexes * sizeof (PCIe_COMPLEX_DESCRIPTOR),
+ StdHeader
+ );
+ if (NumberOfPorts != 0) {
+ // Copy port descriptor array associated with complex with SB attached
+ LibAmdMemCopy (
+ (UINT8*) ResultComplexConfig + NumberOfComplexes * sizeof (PCIe_COMPLEX_DESCRIPTOR) + sizeof (PCIe_PORT_DESCRIPTOR),
+ SbComplexDescriptor->PciePortList,
+ NumberOfPorts * sizeof (PCIe_PORT_DESCRIPTOR),
+ StdHeader
+ );
+ // Update SB complex pointer on in memory list
+ SbComplexDescriptor = PcieInputParserGetComplexDescriptorOfSocket ((PCIe_COMPLEX_DESCRIPTOR *) ResultComplexConfig, Node0SocketId);
+ // Attach port descriptor array to complex
+ SbComplexDescriptor->PciePortList = (PCIe_PORT_DESCRIPTOR *) ((UINT8*) ResultComplexConfig + NumberOfComplexes * sizeof (PCIe_COMPLEX_DESCRIPTOR) + sizeof (PCIe_PORT_DESCRIPTOR));
+ for (Index = 0; Index < NumberOfPorts; ++Index) {
+ EngineDescriptor = PcieInputParserGetEngineDescriptor (SbComplexDescriptor, Index);
+ if (EngineDescriptor->EngineData.EngineType == PciePortEngine) {
+ DescriptorLoLane = MIN (EngineDescriptor->EngineData.StartLane, EngineDescriptor->EngineData.EndLane);
+ DescriptorHiLane = MAX (EngineDescriptor->EngineData.StartLane, EngineDescriptor->EngineData.EndLane);
+ if (DescriptorLoLane >= DefaultSbPortDescriptor.EngineData.StartLane && DescriptorLoLane <= DefaultSbPortDescriptor.EngineData.EndLane) {
+ SbPortDescriptor = (PCIe_PORT_DESCRIPTOR *) EngineDescriptor;
+ }
+ }
+ }
+ }
+ if (SbPortDescriptor == NULL) {
+ // No descriptor that represent SB where found, create new one, will be first one in list
+ SbPortDescriptor = (PCIe_PORT_DESCRIPTOR *) ((UINT8*) ResultComplexConfig + NumberOfComplexes * sizeof (PCIe_COMPLEX_DESCRIPTOR));
+ // Copy default config info
+ LibAmdMemCopy (SbPortDescriptor, &DefaultSbPortDescriptor, sizeof (PCIe_PORT_DESCRIPTOR), StdHeader);
+ // Reattach descriptor list to complex
+ SbComplexDescriptor->PciePortList = SbPortDescriptor;
+ } else {
+ // Move SB descriptor to be first one in array
+ LibAmdMemCopy (
+ (UINT8*) ResultComplexConfig + NumberOfComplexes * sizeof (PCIe_COMPLEX_DESCRIPTOR),
+ SbPortDescriptor,
+ sizeof (PCIe_PORT_DESCRIPTOR),
+ StdHeader
+ );
+ // Disable original SB descriptor
+ SbPortDescriptor->EngineData.EngineType = PcieUnusedEngine;
+ //Update pointer to new SB descriptor
+ SbPortDescriptor = (PCIe_PORT_DESCRIPTOR *) ((UINT8*) ResultComplexConfig + NumberOfComplexes * sizeof (PCIe_COMPLEX_DESCRIPTOR));
+ //It is no longer a descriptor that terminates list
+ SbPortDescriptor->Flags &= (~ DESCRIPTOR_TERMINATE_LIST);
+ // Reattach descriptor list to complex
+ SbComplexDescriptor->PciePortList = SbPortDescriptor;
+ }
+ }
+ }
+ // Mark descriptor as SB link
+ SbPortDescriptor->Port.MiscControls.SbLink = 0x1;
+ return ResultComplexConfig;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Locate global PCIe configuration data
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @param[out] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_SUCCESS Configuration data successfully located
+ * @retval AGESA_FATAL Configuration can not be located.
+ */
+AGESA_STATUS
+PcieLocateConfigurationData (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT PCIe_PLATFORM_CONFIG **Pcie
+ )
+{
+ *Pcie = GnbLocateHeapBuffer (AMD_PCIE_COMPLEX_DATA_HANDLE, StdHeader);
+ if (*Pcie == NULL) {
+ IDS_ERROR_TRAP;
+ return AGESA_FATAL;
+ }
+ (*Pcie)->StdHeader = (PVOID) StdHeader;
+ PcieUpdateConfigurationData (*Pcie);
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attache descriptors
+ *
+ *
+ * @param[in] Type Descriptor type
+ * @param[in,out] Base Base descriptor
+ * @param[in,out] New New descriptor
+ */
+VOID
+STATIC
+PcieConfigAttachDescriptors (
+ IN UINT32 Type,
+ IN OUT PCIe_DESCRIPTOR_HEADER *Base,
+ IN OUT PCIe_DESCRIPTOR_HEADER *New
+ )
+{
+ PCIe_DESCRIPTOR_HEADER *Left;
+ PCIe_DESCRIPTOR_HEADER *Right;
+
+ Left = PcieConfigGetPeer (DESCRIPTOR_TERMINATE_GNB, PcieConfigGetChild (Type, Base));
+ ASSERT (Left != NULL);
+ Right = PcieConfigGetChild (Type, New);
+ Left->Peer = (UINT16) ((UINT8 *) Right - (UINT8 *) Left);
+ PcieConfigResetDescriptorFlags (Left, DESCRIPTOR_TERMINATE_TOPOLOGY);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Attach configurations of two GNB to each other.
+ *
+ * Function will link all data structure to linked lists
+ *
+ * @param[in,out] Base Base complex descriptor
+ * @param[in,out] New New complex descriptor
+ */
+VOID
+STATIC
+PcieConfigAttachComplexes (
+ IN OUT PCIe_COMPLEX_CONFIG *Base,
+ IN OUT PCIe_COMPLEX_CONFIG *New
+ )
+{
+ // Connect Complex
+ Base->Header.Peer = (UINT16) ((UINT8 *) New - (UINT8 *) Base);
+ PcieConfigResetDescriptorFlags (Base, DESCRIPTOR_TERMINATE_TOPOLOGY);
+ // Connect Silicon
+ PcieConfigAttachDescriptors (DESCRIPTOR_SILICON, &Base->Header, &New->Header);
+ // Connect Wrappers
+ PcieConfigAttachDescriptors (DESCRIPTOR_PCIE_WRAPPER | DESCRIPTOR_DDI_WRAPPER, &Base->Header, &New->Header);
+ // Connect Engines
+ PcieConfigAttachDescriptors (DESCRIPTOR_PCIE_ENGINE | DESCRIPTOR_DDI_ENGINE, &Base->Header, &New->Header);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Update configuration data
+ *
+ * Puprouse of this structure to update config data that base on programming of
+ * other silicon compoments. For instance PCI address of GNB and PCIe ports
+ * can change by AGESA or external agent
+ *
+ *
+ * @param[in,out] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_SUCCESS Configuration data successfully update
+ * @retval AGESA_FATAL Failt to update configuration
+ */
+AGESA_STATUS
+PcieUpdateConfigurationData (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_SILICON_CONFIG *Silicon;
+ PCIe_ENGINE_CONFIG *Engine;
+ PCI_ADDR NewAddress;
+ // Update silicon configuration
+ Silicon = PcieConfigGetChildSilicon (Pcie);
+ while (Silicon != NULL) {
+ NewAddress = GnbFmGetPciAddress ((GNB_HANDLE *) PcieConfigGetParentComplex (Silicon), GnbLibGetHeader (Pcie));
+ if (Silicon->Address.AddressValue != NewAddress.AddressValue) {
+ Silicon->Address.AddressValue = NewAddress.AddressValue;
+ Engine = PcieConfigGetChildEngine (Silicon);
+ while (Engine != NULL) {
+ if (PcieConfigIsPcieEngine (Engine)) {
+ Engine->Type.Port.Address.Address.Bus = Silicon->Address.Address.Bus;
+ }
+ Engine = (PCIe_ENGINE_CONFIG *) PcieConfigGetNextTopologyDescriptor (Engine, DESCRIPTOR_TERMINATE_GNB);
+ }
+ }
+ Silicon = (PCIe_SILICON_CONFIG *) PcieConfigGetNextTopologyDescriptor (Silicon, DESCRIPTOR_TERMINATE_TOPOLOGY);
+ }
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieConfigData.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieConfigData.h
new file mode 100644
index 0000000..b38287c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieConfigData.h
@@ -0,0 +1,57 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB function to create/locate PCIe configuration data area
+ *
+ * Contain code that create/locate and rebase configuration data area.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIECONFIGDATA_H_
+#define _PCIECONFIGDATA_H_
+
+
+AGESA_STATUS
+PcieLocateConfigurationData (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ OUT PCIe_PLATFORM_CONFIG **Pcie
+ );
+
+#endif
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieConfigLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieConfigLib.c
new file mode 100644
index 0000000..8e5e3dd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieConfigLib.c
@@ -0,0 +1,799 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB function to create/locate PCIe configuration data area
+ *
+ * Contain code that create/locate and rebase configuration data area.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "PcieMapTopology.h"
+#include "PcieInputParser.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIECONFIG_PCIECONFIGLIB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * get Master Lane of PCIe port engine
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine descriptor
+ * @retval Master Engine Lane Number
+ */
+UINT8
+PcieConfigGetPcieEngineMasterLane (
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ UINT8 MasterLane;
+ PCIe_WRAPPER_CONFIG *Wrapper;
+ ASSERT (PcieConfigIsPcieEngine (Engine));
+
+ Wrapper = PcieConfigGetParentWrapper (Engine);
+ if (Engine->EngineData.StartLane <= Engine->EngineData.EndLane) {
+ MasterLane = (UINT8) (Engine->EngineData.StartLane - Wrapper->StartPhyLane);
+ } else {
+ MasterLane = (UINT8) (Engine->EngineData.EndLane - Wrapper->StartPhyLane);
+ }
+ return MasterLane;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get number of core lanes
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine descriptor
+ * @retval Number of core lane
+ */
+UINT8
+PcieConfigGetNumberOfCoreLane (
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ if (Engine->Type.Port.StartCoreLane >= UNUSED_LANE_ID || Engine->Type.Port.EndCoreLane >= UNUSED_LANE_ID) {
+ return 0;
+ }
+ return (UINT8) (Engine->Type.Port.EndCoreLane - Engine->Type.Port.StartCoreLane + 1);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Disable engine
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ */
+VOID
+PcieConfigDisableEngine (
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ if (PcieConfigIsSbPcieEngine (Engine)) {
+ return;
+ }
+ PcieConfigResetDescriptorFlags (Engine, DESCRIPTOR_ALLOCATED);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Disable all engines on wrapper
+ *
+ *
+ *
+ * @param[in] EngineTypeMask Engine type bitmap.
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ */
+VOID
+PcieConfigDisableAllEngines (
+ IN UINTN EngineTypeMask,
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ while (EngineList != NULL) {
+ if ((EngineList->EngineData.EngineType & EngineTypeMask) != 0) {
+ PcieConfigDisableEngine (EngineList);
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get engine PHY lanes bitmap
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ */
+UINT32
+PcieConfigGetEnginePhyLaneBitMap (
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ UINT32 LaneBitMap;
+ LaneBitMap = 0;
+ if (PcieLibIsEngineAllocated (Engine)) {
+ LaneBitMap = ((1 << PcieConfigGetNumberOfPhyLane (Engine)) - 1) << (PcieLibGetLoPhyLane (Engine) - PcieConfigGetParentWrapper (Engine)->StartPhyLane);
+ }
+ return LaneBitMap;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get number of phy lanes
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @retval Number of Phy lane
+ */
+UINT8
+PcieConfigGetNumberOfPhyLane (
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ if (Engine->EngineData.StartLane >= UNUSED_LANE_ID || Engine->EngineData.StartLane >= UNUSED_LANE_ID) {
+ return 0;
+ }
+ if (Engine->EngineData.StartLane > Engine->EngineData.EndLane) {
+ return (UINT8) (Engine->EngineData.StartLane - Engine->EngineData.EndLane + 1);
+ } else {
+ return (UINT8) (Engine->EngineData.EndLane - Engine->EngineData.StartLane + 1);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get port configuration signature for given wrapper and core
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] CoreId Core ID
+ * @retval Configuration Signature
+ */
+UINT64
+PcieConfigGetConfigurationSignature (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT8 CoreId
+ )
+{
+ UINT64 ConfigurationSignature;
+ PCIe_ENGINE_CONFIG *EngineList;
+ ConfigurationSignature = 0;
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ while (EngineList != NULL) {
+ if (PcieConfigIsPcieEngine (EngineList) && EngineList->Type.Port.CoreId == CoreId) {
+ ConfigurationSignature = (ConfigurationSignature << 8) | PcieConfigGetNumberOfCoreLane (EngineList);
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+ return ConfigurationSignature;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check Port Status
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] PortStatus Check if status asserted for port
+ * @retval TRUE if status asserted
+ */
+BOOLEAN
+PcieConfigCheckPortStatus (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT32 PortStatus
+ )
+{
+ return (Engine->InitStatus & PortStatus) == 0 ? FALSE : TRUE;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set/Reset port status
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] SetStatus SetStatus
+ * @param[in] ResetStatus ResetStatus
+ *
+ */
+UINT16
+PcieConfigUpdatePortStatus (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_ENGINE_INIT_STATUS SetStatus,
+ IN PCIe_ENGINE_INIT_STATUS ResetStatus
+ )
+{
+ Engine->InitStatus |= SetStatus;
+ Engine->InitStatus &= (~ResetStatus);
+ return Engine->InitStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Execute callback on all descriptor of specific type
+ *
+ *
+ * @param[in] InDescriptorFlags Include descriptor flags
+ * @param[in] OutDescriptorFlags Exlude descriptor flags
+ * @param[in] TerminationFlags Termination flags
+ * @param[in] Callback Pointer to callback function
+ * @param[in, out] Buffer Pointer to buffer to pass information to callback
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+AGESA_STATUS
+PcieConfigRunProcForAllDescriptors (
+ IN UINT32 InDescriptorFlags,
+ IN UINT32 OutDescriptorFlags,
+ IN UINT32 TerminationFlags,
+ IN PCIe_RUN_ON_DESCRIPTOR_CALLBACK Callback,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS Status;
+ PCIe_DESCRIPTOR_HEADER *Descriptor;
+
+ AgesaStatus = AGESA_SUCCESS;
+ Descriptor = PcieConfigGetChild (InDescriptorFlags & DESCRIPTOR_ALL_TYPES, &Pcie->Header);
+ while (Descriptor != NULL) {
+ if ((InDescriptorFlags & Descriptor->DescriptorFlags) != 0 && (OutDescriptorFlags && Descriptor->DescriptorFlags) == 0) {
+ Status = Callback (Descriptor, Buffer, Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ }
+ Descriptor = (PCIe_DESCRIPTOR_HEADER *) PcieConfigGetNextTopologyDescriptor (Descriptor, TerminationFlags);
+ }
+ return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Execute callback on all wrappers in topology
+ *
+ *
+ * @param[in] DescriptorFlags Wrapper Flags
+ * @param[in] Callback Pointer to callback function
+ * @param[in, out] Buffer Pointer to buffer to pass information to callback
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+AGESA_STATUS
+PcieConfigRunProcForAllWrappers (
+ IN UINT32 DescriptorFlags,
+ IN PCIe_RUN_ON_WRAPPER_CALLBACK Callback,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS Status;
+ PCIe_WRAPPER_CONFIG *Wrapper;
+
+ AgesaStatus = AGESA_SUCCESS;
+ Wrapper = (PCIe_WRAPPER_CONFIG *) PcieConfigGetChild (DESCRIPTOR_ALL_WRAPPERS, &Pcie->Header);
+ while (Wrapper != NULL) {
+ if (!(PcieLibIsVirtualDesciptor (Wrapper) && (DescriptorFlags & DESCRIPTOR_VIRTUAL) == 0)) {
+ if ((DescriptorFlags & DESCRIPTOR_ALL_WRAPPERS & Wrapper->Header.DescriptorFlags) != 0) {
+ Status = Callback (Wrapper, Buffer, Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ }
+ }
+ Wrapper = (PCIe_WRAPPER_CONFIG *) PcieConfigGetNextTopologyDescriptor (Wrapper, DESCRIPTOR_TERMINATE_TOPOLOGY);
+ }
+ return AgesaStatus;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Execute callback on all engine in topology
+ *
+ *
+ * @param[in] DescriptorFlags Engine flags.
+ * @param[in] Callback Pointer to callback function
+ * @param[in, out] Buffer Pointer to buffer to pass information to callback
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PcieConfigRunProcForAllEngines (
+ IN UINT32 DescriptorFlags,
+ IN PCIe_RUN_ON_ENGINE_CALLBACK Callback,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+
+ PCIe_ENGINE_CONFIG *Engine;
+ Engine = (PCIe_ENGINE_CONFIG *) PcieConfigGetChild (DESCRIPTOR_ALL_ENGINES, &Pcie->Header);
+ while (Engine != NULL) {
+ if (!(PcieLibIsVirtualDesciptor (Engine) && (DescriptorFlags & DESCRIPTOR_VIRTUAL) == 0)) {
+ if (!((DescriptorFlags & DESCRIPTOR_ALLOCATED) != 0 && !PcieLibIsEngineAllocated (Engine))) {
+ if ((Engine->Header.DescriptorFlags & DESCRIPTOR_ALL_ENGINES & DescriptorFlags) != 0) {
+ Callback (Engine, Buffer, Pcie);
+ }
+ }
+ }
+ Engine = (PCIe_ENGINE_CONFIG *) PcieConfigGetNextTopologyDescriptor (Engine, DESCRIPTOR_TERMINATE_TOPOLOGY);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get parent descriptor of specific type
+ *
+ *
+ * @param[in] Type Descriptor type
+ * @param[in] Descriptor Pointer to buffer to pass information to callback
+ */
+PCIe_DESCRIPTOR_HEADER *
+PcieConfigGetParent (
+ IN UINT32 Type,
+ IN PCIe_DESCRIPTOR_HEADER *Descriptor
+ )
+{
+ while ((Descriptor->DescriptorFlags & Type) == 0) {
+ if (Descriptor->Parent != 0) {
+ Descriptor = (PCIe_DESCRIPTOR_HEADER *) ((UINT8 *) Descriptor - Descriptor->Parent);
+ } else {
+ return NULL;
+ }
+ }
+ return Descriptor;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get child descriptor of specific type
+ *
+ *
+ * @param[in] Type Descriptor type
+ * @param[in] Descriptor Pointer to buffer to pass information to callback
+ */
+PCIe_DESCRIPTOR_HEADER *
+PcieConfigGetChild (
+ IN UINT32 Type,
+ IN PCIe_DESCRIPTOR_HEADER *Descriptor
+ )
+{
+ while ((Descriptor->DescriptorFlags & Type) == 0) {
+ if (Descriptor->Child != 0) {
+ Descriptor = (PCIe_DESCRIPTOR_HEADER *) ((UINT8 *) Descriptor + Descriptor->Child);
+ } else {
+ return NULL;
+ }
+ }
+ return Descriptor;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get peer descriptor of specific type
+ *
+ *
+ * @param[in] Type Descriptor type
+ * @param[in] Descriptor Pointer to buffer to pass information to callback
+ */
+PCIe_DESCRIPTOR_HEADER *
+PcieConfigGetPeer (
+ IN UINT32 Type,
+ IN PCIe_DESCRIPTOR_HEADER *Descriptor
+ )
+{
+ ASSERT (Descriptor != NULL);
+ while ((Descriptor->DescriptorFlags & Type) == 0) {
+ if (Descriptor->Peer != 0) {
+ Descriptor = (PCIe_DESCRIPTOR_HEADER *) ((UINT8 *) Descriptor + Descriptor->Peer);
+ } else {
+ return NULL;
+ }
+ }
+ return Descriptor;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check is engine is active or potentially active
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine descriptor
+ * @retval TRUE - engine active
+ * @retval FALSE - engine not active
+ */
+BOOLEAN
+PcieConfigIsActivePcieEngine (
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ BOOLEAN Result;
+ ASSERT (PcieConfigIsPcieEngine (Engine));
+ Result = FALSE;
+ if (PcieConfigIsEngineAllocated (Engine)) {
+ if (PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_TRAINING_SUCCESS) ||
+ (Engine->Type.Port.PortData.LinkHotplug != HotplugDisabled && Engine->Type.Port.PortData.LinkHotplug != HotplugInboard)) {
+ Result = TRUE;
+ }
+ }
+ return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Locate SB engine on wrapper
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @retval SB engine pointer or NULL
+ */
+PCIe_ENGINE_CONFIG *
+PcieConfigLocateSbEngine (
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ while (EngineList != NULL) {
+ if (PcieConfigIsSbPcieEngine (EngineList)) {
+ return EngineList;
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+ return NULL;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Helper function to dump engine configuration
+ *
+ *
+ * @param[in] EngineList Engine Configuration
+ */
+VOID
+PcieConfigEngineDebugDump (
+ IN PCIe_ENGINE_CONFIG *EngineList
+ )
+{
+ IDS_HDT_CONSOLE (PCIE_MISC, " Descriptor Flags - 0x%08x\n", EngineList->Header.DescriptorFlags);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Engine Type - %s\n Start Phy Lane - %d\n End Phy Lane - %d\n",
+ ((EngineList->EngineData.EngineType == PciePortEngine) ? "PCIe Port" : "DDI Link"),
+ EngineList->EngineData.StartLane,
+ EngineList->EngineData.EndLane
+ );
+ IDS_HDT_CONSOLE (PCIE_MISC, " Scrath - %d\n", EngineList->Scratch);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Init Status - 0x%08x\n", EngineList->InitStatus);
+ if (PcieLibIsPcieEngine (EngineList)) {
+ IDS_HDT_CONSOLE (PCIE_MISC, " PCIe port configuration:\n");
+ IDS_HDT_CONSOLE (PCIE_MISC, " Port Training - %s\n",
+ (EngineList->Type.Port.PortData.PortPresent == PortDisabled) ? "Disable" : "Enabled"
+ );
+ IDS_HDT_CONSOLE (PCIE_MISC, " Start Core Lane - %d\n", EngineList->Type.Port.StartCoreLane);
+ IDS_HDT_CONSOLE (PCIE_MISC, " End Core Lane - %d\n", EngineList->Type.Port.EndCoreLane);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Requested PCI Dev Number - %d\n",EngineList->Type.Port.PortData.DeviceNumber);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Requested PCI Func Number - %d\n",EngineList->Type.Port.PortData.FunctionNumber);
+ IDS_HDT_CONSOLE (PCIE_MISC, " PCI Address - %d:%d:%d\n",
+ EngineList->Type.Port.Address.Address.Bus,
+ EngineList->Type.Port.Address.Address.Device,
+ EngineList->Type.Port.Address.Address.Function
+ );
+ IDS_HDT_CONSOLE (PCIE_MISC, " Misc Control - 0x%02x\n", EngineList->Type.Port.PortData.MiscControls);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Native PCI Dev Number - %d\n", EngineList->Type.Port.NativeDevNumber);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Native PCI Func Number - %d\n", EngineList->Type.Port.NativeFunNumber);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Hotplug - %s\n",
+ (EngineList->Type.Port.PortData.LinkHotplug == HotplugDisabled) ? "Disabled" : (
+ (EngineList->Type.Port.PortData.LinkHotplug == HotplugBasic) ? "Basic" : (
+ (EngineList->Type.Port.PortData.LinkHotplug == HotplugServer) ? "Server" : (
+ (EngineList->Type.Port.PortData.LinkHotplug == HotplugEnhanced) ? "Enhanced" : (
+ (EngineList->Type.Port.PortData.LinkHotplug == HotplugInboard) ? "Inboard" : "Unknown"))))
+ );
+ ASSERT (EngineList->Type.Port.PortData.LinkHotplug < MaxHotplug);
+ IDS_HDT_CONSOLE (PCIE_MISC, " ASPM - %s\n",
+ (EngineList->Type.Port.PortData.LinkAspm == AspmDisabled) ? "Disabled" : (
+ (EngineList->Type.Port.PortData.LinkAspm == AspmL0s) ? "L0s" : (
+ (EngineList->Type.Port.PortData.LinkAspm == AspmL1) ? "L1" : (
+ (EngineList->Type.Port.PortData.LinkAspm == AspmL0sL1) ? "L0s & L1" : "Unknown")))
+ );
+ ASSERT (EngineList->Type.Port.PortData.LinkAspm < MaxAspm);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Speed - %d\n",
+ EngineList->Type.Port.PortData.LinkSpeedCapability
+ );
+ } else {
+ IDS_HDT_CONSOLE (PCIE_MISC, " DDI configuration:\n");
+ IDS_HDT_CONSOLE (PCIE_MISC, " Connector - %s\n",
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeDP) ? "DP" : (
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeEDP) ? "eDP" : (
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeSingleLinkDVI) ? "Single Link DVI" : (
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeDualLinkDVI) ? "Dual Link DVI" : (
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeHDMI) ? "HDMI" : (
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeDpToVga) ? "DP-to-VGA" : (
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeDpToLvds) ? "DP-to-LVDS" : (
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeLvds) ? "LVDS" : (
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeSingleLinkDviI) ? "Single Link DVI-I" : (
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeCrt) ? "CRT" : (
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeEDPToLvds) ? "eDP To Lvds - No SW Init Required" : (
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeEDPToLvdsSwInit) ? "Third party eDP To Lvds - SW Init Required" : (
+ (EngineList->Type.Ddi.DdiData.ConnectorType == ConnectorTypeAutoDetect) ? "Autodetect" : "Unknown"))))))))))))
+ );
+ ASSERT (EngineList->Type.Ddi.DdiData.ConnectorType < MaxConnectorType);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Aux - Aux%d\n", EngineList->Type.Ddi.DdiData.AuxIndex + 1);
+ ASSERT (EngineList->Type.Ddi.DdiData.AuxIndex < MaxAux);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Hdp - Hdp%d\n", EngineList->Type.Ddi.DdiData.HdpIndex + 1);
+ ASSERT (EngineList->Type.Ddi.DdiData.HdpIndex < MaxHdp);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Helper function to dump wrapper configuration
+ *
+ *
+ * @param[in] WrapperList Wrapper Configuration
+ */
+VOID
+PcieConfigWrapperDebugDump (
+ IN PCIe_WRAPPER_CONFIG *WrapperList
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ IDS_HDT_CONSOLE (PCIE_MISC, " <---------Wrapper - %s Config -------->\n",
+ PcieFmDebugGetWrapperNameString (WrapperList)
+ );
+ IDS_HDT_CONSOLE (PCIE_MISC, " Start PHY lane - %02d\n", WrapperList->StartPhyLane);
+ IDS_HDT_CONSOLE (PCIE_MISC, " End PHY lane - %02d\n", WrapperList->EndPhyLane);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Descriptor Flags - 0x%08x\n", WrapperList->Header.DescriptorFlags);
+ IDS_HDT_CONSOLE (PCIE_MISC, " PowerOffUnusedLanes - %x\n PowerOffUnusedPlls - %x\n ClkGating - %x\n"
+ " LclkGating - %x\n TxclkGatingPllPowerDown - %x\n PllOffInL1 - %x\n",
+ WrapperList->Features.PowerOffUnusedLanes,
+ WrapperList->Features.PowerOffUnusedPlls,
+ WrapperList->Features.ClkGating,
+ WrapperList->Features.LclkGating,
+ WrapperList->Features.TxclkGatingPllPowerDown,
+ WrapperList->Features.PllOffInL1
+ );
+ IDS_HDT_CONSOLE (PCIE_MISC, " <---------Wrapper - %s Config End----->\n",
+ PcieFmDebugGetWrapperNameString (WrapperList)
+ );
+ EngineList = PcieConfigGetChildEngine (WrapperList);
+ while (EngineList != NULL) {
+ if (PcieLibIsEngineAllocated (EngineList)) {
+ PcieConfigEngineDebugDump (EngineList);
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Helper function to dump configuration to debug out
+ *
+ *
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieConfigDebugDump (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_SILICON_CONFIG *SiliconList;
+ PCIe_WRAPPER_CONFIG *WrapperList;
+ PCIe_COMPLEX_CONFIG *ComplexList;
+ ComplexList = (PCIe_COMPLEX_CONFIG *) PcieConfigGetChild (DESCRIPTOR_COMPLEX, &Pcie->Header);
+ IDS_HDT_CONSOLE (PCIE_MISC, "<-------------- PCIe Config Start------------>\n");
+ IDS_HDT_CONSOLE (PCIE_MISC, " PSPP Policy - %s\n",
+ (Pcie->PsppPolicy == PsppPowerSaving) ? "Power Saving" :
+ (Pcie->PsppPolicy == PsppBalanceHigh) ? "Balance-High" : (
+ (Pcie->PsppPolicy == PsppBalanceLow) ? "Balance-Low" : (
+ (Pcie->PsppPolicy == PsppPerformance) ? "Performance" : (
+ (Pcie->PsppPolicy == PsppDisabled) ? "Disabled" : "Unknown")))
+ );
+ IDS_HDT_CONSOLE (PCIE_MISC, " GFX Workaround - %s\n",
+ (Pcie->GfxCardWorkaround == 0) ? "Disabled" : "Enabled"
+ );
+ IDS_HDT_CONSOLE (PCIE_MISC, " LinkL0Pooling - %dus\n",
+ Pcie->LinkL0Pooling
+ );
+ IDS_HDT_CONSOLE (PCIE_MISC, " LinkGpioResetAssertionTime - %dus\n",
+ Pcie->LinkGpioResetAssertionTime
+ );
+ IDS_HDT_CONSOLE (PCIE_MISC, " LinkReceiverDetectionPooling - %dus\n",
+ Pcie->LinkReceiverDetectionPooling
+ );
+ IDS_HDT_CONSOLE (PCIE_MISC, " Training Algorythm - %s\n",
+ (Pcie->TrainingAlgorithm == PcieTrainingStandard) ? "PcieTrainingStandard" : (
+ (Pcie->TrainingAlgorithm == PcieTrainingDistributed) ? "PcieTrainingDistributed" : "Unknown")
+ );
+ while (ComplexList != NULL) {
+ IDS_HDT_CONSOLE (PCIE_MISC, " <---------- Complex Config Start ---------->\n");
+ IDS_HDT_CONSOLE (PCIE_MISC, " Descriptor Flags - 0x%08x\n", ComplexList->Header.DescriptorFlags);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Socket ID - %d\n", ComplexList->SocketId);
+ SiliconList = PcieConfigGetChildSilicon (ComplexList);
+ while (SiliconList != NULL) {
+ IDS_HDT_CONSOLE (PCIE_MISC, " <---------- Silicon Config Start -------->\n");
+ IDS_HDT_CONSOLE (PCIE_MISC, " Descriptor Flags - 0x%08x\n", SiliconList->Header.DescriptorFlags);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Silicon ID - %d\n", SiliconList->SiliconId);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Node ID - %d\n", SiliconList->NodeId);
+ IDS_HDT_CONSOLE (PCIE_MISC, " Host PCI Address - %d:%d:%d\n",
+ SiliconList->Address.Address.Bus,
+ SiliconList->Address.Address.Device,
+ SiliconList->Address.Address.Function
+ );
+ WrapperList = PcieConfigGetChildWrapper (SiliconList);
+ while (WrapperList != NULL) {
+ PcieConfigWrapperDebugDump (WrapperList);
+ WrapperList = PcieLibGetNextDescriptor (WrapperList);
+ }
+ IDS_HDT_CONSOLE (PCIE_MISC, " <---------- Silicon Config End ---------->\n");
+ SiliconList = PcieLibGetNextDescriptor (SiliconList);
+ }
+ IDS_HDT_CONSOLE (PCIE_MISC, " <---------- Complex Config End ------------>\n");
+ ComplexList = PcieLibGetNextDescriptor (ComplexList);
+ }
+ IDS_HDT_CONSOLE (PCIE_MISC, "<-------------- PCIe Config End-------------->\n");
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Helper function to dump input configuration to user engine descriptor
+ *
+ *
+ * @param[in] EngineDescriptor Pointer to engine descriptor
+ */
+VOID
+PcieUserDescriptorConfigDump (
+ IN PCIe_ENGINE_DESCRIPTOR *EngineDescriptor
+ )
+{
+
+ IDS_HDT_CONSOLE (PCIE_MISC, " Engine Type - %s\n",
+ (EngineDescriptor->EngineData.EngineType == PciePortEngine) ? "PCIe Port" : (
+ (EngineDescriptor->EngineData.EngineType == PcieDdiEngine) ? "DDI Link" : (
+ (EngineDescriptor->EngineData.EngineType == PcieUnusedEngine) ? "Unused" : "Invalid"))
+ );
+ IDS_HDT_CONSOLE (PCIE_MISC, " Start Phy Lane - %d\n End Phy Lane - %d\n",
+ EngineDescriptor->EngineData.StartLane,
+ EngineDescriptor->EngineData.EndLane
+ );
+ if (EngineDescriptor->EngineData.EngineType == PciePortEngine) {
+ IDS_HDT_CONSOLE (PCIE_MISC, " PortPresent - %d\n ChannelType - %d\n DeviceNumber - %d\n FunctionNumber - %d\n LinkSpeedCapability - %d\n LinkAspm - %d\n LinkHotplug - %d\n ResetId - %d\n SB link - %d\n MiscControls - 0x%02x\n" ,
+ ((PCIe_PORT_DESCRIPTOR *) EngineDescriptor)->Port.PortPresent,
+ ((PCIe_PORT_DESCRIPTOR *) EngineDescriptor)->Port.ChannelType,
+ ((PCIe_PORT_DESCRIPTOR *) EngineDescriptor)->Port.DeviceNumber,
+ ((PCIe_PORT_DESCRIPTOR *) EngineDescriptor)->Port.FunctionNumber,
+ ((PCIe_PORT_DESCRIPTOR *) EngineDescriptor)->Port.LinkSpeedCapability,
+ ((PCIe_PORT_DESCRIPTOR *) EngineDescriptor)->Port.LinkAspm,
+ ((PCIe_PORT_DESCRIPTOR *) EngineDescriptor)->Port.LinkHotplug,
+ ((PCIe_PORT_DESCRIPTOR *) EngineDescriptor)->Port.ResetId,
+ ((PCIe_PORT_DESCRIPTOR *) EngineDescriptor)->Port.MiscControls.SbLink,
+ ((PCIe_PORT_DESCRIPTOR *) EngineDescriptor)->Port.MiscControls
+ );
+ }
+ if (EngineDescriptor->EngineData.EngineType == PcieDdiEngine) {
+ IDS_HDT_CONSOLE (PCIE_MISC, " ConnectorType - %d\n AuxIndex - %d\n HdpIndex - %d\n" ,
+ ((PCIe_DDI_DESCRIPTOR *) EngineDescriptor)->Ddi.ConnectorType,
+ ((PCIe_DDI_DESCRIPTOR *) EngineDescriptor)->Ddi.AuxIndex,
+ ((PCIe_DDI_DESCRIPTOR *) EngineDescriptor)->Ddi.HdpIndex
+ );
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Helper function to dump input configuration to debug out
+ *
+ *
+ * @param[in] ComplexDescriptor Pointer to user defined complex descriptor
+ */
+VOID
+PcieUserConfigConfigDump (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexDescriptor
+ )
+{
+ PCIe_ENGINE_DESCRIPTOR *EngineDescriptor;
+ PCIe_COMPLEX_DESCRIPTOR *CurrentComplexDescriptor;
+ UINTN ComplexIndex;
+ UINTN Index;
+ UINTN NumberOfEngines;
+ UINTN NumberOfComplexes;
+
+ IDS_HDT_CONSOLE (PCIE_MISC, "<---------- PCIe User Config Start------------->\n");
+
+ NumberOfComplexes = PcieInputParserGetNumberOfComplexes (ComplexDescriptor);
+ for (ComplexIndex = 0; ComplexIndex < NumberOfComplexes; ++ComplexIndex) {
+ CurrentComplexDescriptor = PcieInputParserGetComplexDescriptor (ComplexDescriptor, ComplexIndex);
+ NumberOfEngines = PcieInputParserGetNumberOfEngines (CurrentComplexDescriptor);
+ IDS_HDT_CONSOLE (PCIE_MISC, " ComplexDescriptor SocketId - %d\n NumberOfEngines - %d\n",
+ ComplexDescriptor->SocketId,
+ NumberOfEngines
+ );
+
+ for (Index = 0; Index < NumberOfEngines; Index++) {
+ EngineDescriptor = PcieInputParserGetEngineDescriptor (ComplexDescriptor, Index);
+ PcieUserDescriptorConfigDump (EngineDescriptor);
+ }
+ }
+ IDS_HDT_CONSOLE (PCIE_MISC, "<---------- PCIe User Config End-------------->\n");
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieConfigLib.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieConfigLib.h
new file mode 100644
index 0000000..45e5e46
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieConfigLib.h
@@ -0,0 +1,221 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB function to create/locate PCIe configuration data area
+ *
+ * Contain code that create/locate and rebase configuration data area.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIECONFIGLIB_H_
+#define _PCIECONFIGLIB_H_
+
+typedef VOID (*PCIe_RUN_ON_ENGINE_CALLBACK) (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+typedef AGESA_STATUS (*PCIe_RUN_ON_WRAPPER_CALLBACK) (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+typedef AGESA_STATUS (*PCIe_RUN_ON_DESCRIPTOR_CALLBACK) (
+ IN PCIe_DESCRIPTOR_HEADER *Descriptor,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+UINT8
+PcieConfigGetPcieEngineMasterLane (
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+UINT8
+PcieConfigGetNumberOfCoreLane (
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+VOID
+PcieConfigDisableAllEngines (
+ IN UINTN EngineTypeMask,
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ );
+
+VOID
+PcieConfigDisableEngine (
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+UINT32
+PcieConfigGetEnginePhyLaneBitMap (
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+UINT8
+PcieConfigGetNumberOfPhyLane (
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+UINT64
+PcieConfigGetConfigurationSignature (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT8 CoreId
+ );
+
+BOOLEAN
+PcieConfigCheckPortStatus (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT32 PortStatus
+ );
+
+UINT16
+PcieConfigUpdatePortStatus (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_ENGINE_INIT_STATUS SetStatus,
+ IN PCIe_ENGINE_INIT_STATUS ResetStatus
+ );
+
+VOID
+PcieConfigRunProcForAllEngines (
+ IN UINT32 DescriptorFlags,
+ IN PCIe_RUN_ON_ENGINE_CALLBACK Callback,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+AGESA_STATUS
+PcieConfigRunProcForAllWrappers (
+ IN UINT32 DescriptorFlags,
+ IN PCIe_RUN_ON_WRAPPER_CALLBACK Callback,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+AGESA_STATUS
+PcieConfigRunProcForAllDescriptors (
+ IN UINT32 InDescriptorFlags,
+ IN UINT32 OutDescriptorFlags,
+ IN UINT32 TerminationFlags,
+ IN PCIe_RUN_ON_DESCRIPTOR_CALLBACK Callback,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+PCIe_DESCRIPTOR_HEADER *
+PcieConfigGetParent (
+ IN UINT32 Type,
+ IN PCIe_DESCRIPTOR_HEADER *Descriptor
+ );
+
+PCIe_DESCRIPTOR_HEADER *
+PcieConfigGetChild (
+ IN UINT32 Type,
+ IN PCIe_DESCRIPTOR_HEADER *Descriptor
+ );
+
+PCIe_DESCRIPTOR_HEADER *
+PcieConfigGetPeer (
+ IN UINT32 Type,
+ IN PCIe_DESCRIPTOR_HEADER *Descriptor
+ );
+
+BOOLEAN
+PcieConfigIsActivePcieEngine (
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+PCIe_ENGINE_CONFIG *
+PcieConfigLocateSbEngine (
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ );
+
+VOID
+PcieConfigDebugDump (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieConfigWrapperDebugDump (
+ IN PCIe_WRAPPER_CONFIG *WrapperList
+ );
+
+VOID
+PcieConfigEngineDebugDump (
+ IN PCIe_ENGINE_CONFIG *EngineList
+ );
+
+VOID
+PcieUserConfigConfigDump (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexDescriptor
+ );
+
+VOID
+PcieUserDescriptorConfigDump (
+ IN PCIe_ENGINE_DESCRIPTOR *EngineDescriptor
+ );
+
+#define PcieConfigGetParentWrapper(Descriptor) ((PCIe_WRAPPER_CONFIG *) PcieConfigGetParent (DESCRIPTOR_ALL_WRAPPERS, &((Descriptor)->Header)))
+#define PcieConfigGetParentSilicon(Descriptor) ((PCIe_SILICON_CONFIG *) PcieConfigGetParent (DESCRIPTOR_SILICON, &((Descriptor)->Header)))
+#define PcieConfigGetParentComplex(Descriptor) ((PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &((Descriptor)->Header)))
+#define PcieConfigGetPlatform(Descriptor) ((PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &((Descriptor)->Header)))
+#define PcieConfigGetChildWrapper(Descriptor) ((PCIe_WRAPPER_CONFIG *) PcieConfigGetChild (DESCRIPTOR_ALL_WRAPPERS, &((Descriptor)->Header)))
+#define PcieConfigGetChildEngine(Descriptor) ((PCIe_ENGINE_CONFIG *) PcieConfigGetChild (DESCRIPTOR_ALL_ENGINES, &((Descriptor)->Header)))
+#define PcieConfigGetChildSilicon(Descriptor) ((PCIe_SILICON_CONFIG *) PcieConfigGetChild (DESCRIPTOR_SILICON, &((Descriptor)->Header)))
+#define PcieConfigGetNextDescriptor(Descriptor) ((((Descriptor->Header.DescriptorFlags & DESCRIPTOR_TERMINATE_LIST) != 0) ? NULL : (++Descriptor)))
+#define PcieConfigIsPcieEngine(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_PCIE_ENGINE) != 0) : FALSE)
+#define PcieConfigIsDdiEngine(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_DDI_ENGINE) != 0) : FALSE)
+#define PcieConfigIsPcieWrapper(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_PCIE_WRAPPER) != 0) : FALSE)
+#define PcieConfigIsSbPcieEngine(Engine) (Engine != NULL ? ((BOOLEAN) (Engine->Type.Port.PortData.MiscControls.SbLink)) : FALSE)
+#define PcieConfigIsDdiWrapper(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_DDI_WRAPPER) != 0) : FALSE)
+#define PcieConfigIsEngineAllocated(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_ALLOCATED) != 0) : FALSE)
+#define PcieConfigIsVirtualDesciptor(Descriptor) (Descriptor != NULL ? ((Descriptor->Header.DescriptorFlags & DESCRIPTOR_VIRTUAL) != 0) : FALSE)
+#define PcieConfigSetDescriptorFlags(Descriptor, SetDescriptorFlags) if (Descriptor != NULL) (Descriptor)->Header.DescriptorFlags |= SetDescriptorFlags
+#define PcieConfigResetDescriptorFlags(Descriptor, ResetDescriptorFlags) if (Descriptor != NULL) ((PCIe_DESCRIPTOR_HEADER *) Descriptor)->DescriptorFlags &= (~(ResetDescriptorFlags))
+#define PcieInputParsetGetNextDescriptor(Descriptor) (Descriptor != NULL ? ((((Descriptor->Flags & DESCRIPTOR_TERMINATE_LIST) != 0) ? NULL : (Descriptor+1))) : NULL)
+#define PcieConfigGetNextTopologyDescriptor(Descriptor, Termination) (Descriptor != NULL ? (((((PCIe_DESCRIPTOR_HEADER *) Descriptor)->DescriptorFlags & Termination) != 0) ? NULL : ((UINT8 *) Descriptor + ((PCIe_DESCRIPTOR_HEADER *) Descriptor)->Peer)) : NULL)
+#define GnbGetNextHandle(Descriptor) (GNB_HANDLE *) PcieConfigGetNextTopologyDescriptor (Descriptor, DESCRIPTOR_TERMINATE_TOPOLOGY)
+#define PcieConfigGetNextDataDescriptor(Descriptor) ((Descriptor->Flags & DESCRIPTOR_TERMINATE_LIST) != 0 ? NULL : Descriptor+1)
+
+#define PcieConfigGetStdHeader(Descriptor) ((AMD_CONFIG_PARAMS *)((PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &((Descriptor)->Header)))->StdHeader)
+
+#endif
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieInputParser.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieInputParser.c
new file mode 100644
index 0000000..8a174b5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieInputParser.c
@@ -0,0 +1,277 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Procedure to parse PCIe input configuration data
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "PcieConfigLib.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIECONFIG_PCIEINPUTPARSER_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+PCIe_COMPLEX_DESCRIPTOR*
+PcieInputParserGetComplexDescriptor (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexList,
+ IN UINTN Index
+ );
+
+PCIe_COMPLEX_DESCRIPTOR*
+PcieInputParserGetComplexDescriptorOfSocket (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexList,
+ IN UINT32 SocketId
+ );
+
+PCIe_ENGINE_DESCRIPTOR*
+PcieInputParserGetEngineDescriptor (
+ IN PCIe_COMPLEX_DESCRIPTOR *Complex,
+ IN UINTN Index
+ );
+
+UINTN
+PcieInputParserGetNumberOfEngines (
+ IN PCIe_COMPLEX_DESCRIPTOR *Complex
+ );
+
+UINTN
+PcieInputParserGetNumberOfComplexes (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexList
+ );
+
+UINTN
+PcieInputParserGetLengthOfPcieEnginesList (
+ IN PCIe_COMPLEX_DESCRIPTOR *Complex
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get number of complexes in platform topology configuration
+ *
+ *
+ *
+ * @param[in] ComplexList First complex configuration in complex configuration array
+ * @retval Number of Complexes
+ *
+ */
+UINTN
+PcieInputParserGetNumberOfComplexes (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexList
+ )
+{
+ UINTN Result;
+ Result = 0;
+ while (ComplexList != NULL) {
+ Result++;
+ ComplexList = PcieInputParsetGetNextDescriptor (ComplexList);
+ }
+ return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get number of PCIe engines in given complex
+ *
+ *
+ *
+ * @param[in] Complex Complex configuration
+ * @retval Number of Engines
+ */
+UINTN
+PcieInputParserGetLengthOfPcieEnginesList (
+ IN PCIe_COMPLEX_DESCRIPTOR *Complex
+ )
+{
+ UINTN Result;
+ PCIe_PORT_DESCRIPTOR *PciePortList;
+ Result = 0;
+ PciePortList = Complex->PciePortList;
+ while (PciePortList != NULL) {
+ Result++;
+ PciePortList = PcieInputParsetGetNextDescriptor (PciePortList);
+ }
+ return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get number of DDI engines in given complex
+ *
+ *
+ *
+ * @param[in] Complex Complex configuration
+ * @retval Number of Engines
+ */
+STATIC UINTN
+PcieInputParserGetLengthOfDdiEnginesList (
+ IN PCIe_COMPLEX_DESCRIPTOR *Complex
+ )
+{
+ UINTN Result;
+ PCIe_DDI_DESCRIPTOR *DdiLinkList;
+ Result = 0;
+ DdiLinkList = Complex->DdiLinkList;
+ while (DdiLinkList != NULL) {
+ Result++;
+ DdiLinkList = PcieInputParsetGetNextDescriptor (DdiLinkList);
+ }
+ return Result;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get number of engines in given complex
+ *
+ *
+ *
+ * @param[in] Complex Complex configuration header
+ * @retval Number of Engines
+ */
+UINTN
+PcieInputParserGetNumberOfEngines (
+ IN PCIe_COMPLEX_DESCRIPTOR *Complex
+ )
+{
+ UINTN Result;
+
+ Result = PcieInputParserGetLengthOfDdiEnginesList (Complex) +
+ PcieInputParserGetLengthOfPcieEnginesList (Complex);
+ return Result;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get Complex descriptor by index from given Platform configuration
+ *
+ *
+ *
+ * @param[in] ComplexList Platform topology configuration
+ * @param[in] Index Complex descriptor Index
+ * @retval Pointer to Complex Descriptor
+ */
+PCIe_COMPLEX_DESCRIPTOR*
+PcieInputParserGetComplexDescriptor (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexList,
+ IN UINTN Index
+ )
+{
+ ASSERT (Index < (PcieInputParserGetNumberOfComplexes (ComplexList)));
+ return &ComplexList[Index];
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get Complex descriptor by index from given Platform configuration
+ *
+ *
+ *
+ * @param[in] ComplexList Platform topology configuration
+ * @param[in] SocketId Socket Id
+ * @retval Pointer to Complex Descriptor
+ */
+PCIe_COMPLEX_DESCRIPTOR*
+PcieInputParserGetComplexDescriptorOfSocket (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexList,
+ IN UINT32 SocketId
+ )
+{
+ PCIe_COMPLEX_DESCRIPTOR *Result;
+ Result = NULL;
+ while (ComplexList != NULL) {
+ if (ComplexList->SocketId == SocketId) {
+ Result = ComplexList;
+ break;
+ }
+ ComplexList = PcieInputParsetGetNextDescriptor (ComplexList);
+ }
+ return Result;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get Engine descriptor from given complex by index
+ *
+ *
+ *
+ * @param[in] Complex Complex descriptor
+ * @param[in] Index Engine descriptor index
+ * @retval Pointer to Engine Descriptor
+ */
+PCIe_ENGINE_DESCRIPTOR*
+PcieInputParserGetEngineDescriptor (
+ IN PCIe_COMPLEX_DESCRIPTOR *Complex,
+ IN UINTN Index
+ )
+{
+ UINTN PcieListlength;
+ ASSERT (Index < (PcieInputParserGetNumberOfEngines (Complex)));
+ PcieListlength = PcieInputParserGetLengthOfPcieEnginesList (Complex);
+ if (Index < PcieListlength) {
+ return (PCIe_ENGINE_DESCRIPTOR*) &((Complex->PciePortList)[Index]);
+ } else {
+ return (PCIe_ENGINE_DESCRIPTOR*) &((Complex->DdiLinkList)[Index - PcieListlength]);
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieInputParser.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieInputParser.h
new file mode 100644
index 0000000..488c514
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieInputParser.h
@@ -0,0 +1,83 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Procedure to parse PCIe input configuration data
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIEINPUTPARSER_H_
+#define _PCIEINPUTPARSER_H_
+
+
+UINTN
+PcieInputParserGetNumberOfComplexes (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexList
+ );
+
+UINTN
+PcieInputParserGetNumberOfEngines (
+ IN PCIe_COMPLEX_DESCRIPTOR *Complex
+ );
+
+
+PCIe_COMPLEX_DESCRIPTOR*
+PcieInputParserGetComplexDescriptor (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexList,
+ IN UINTN Index
+ );
+
+PCIe_ENGINE_DESCRIPTOR*
+PcieInputParserGetEngineDescriptor (
+ IN PCIe_COMPLEX_DESCRIPTOR *Complex,
+ IN UINTN Index
+ );
+
+PCIe_COMPLEX_DESCRIPTOR*
+PcieInputParserGetComplexDescriptorOfSocket (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexList,
+ IN UINT32 SocketId
+ );
+
+UINTN
+PcieInputParserGetLengthOfPcieEnginesList (
+ IN PCIe_COMPLEX_DESCRIPTOR *Complex
+ );
+#endif
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieMapTopology.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieMapTopology.c
new file mode 100644
index 0000000..cb24a9b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieMapTopology.c
@@ -0,0 +1,645 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Procedure to map user define topology to processor configuration
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GeneralServices.h"
+#include "PcieInputParser.h"
+#include "PcieMapTopology.h"
+#include "GnbPcieConfig.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIECONFIG_PCIEMAPTOPOLOGY_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+AGESA_STATUS
+STATIC
+PcieMapPortsPciAddresses (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+AGESA_STATUS
+PcieMapTopologyOnWrapper (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexDescriptor,
+ IN OUT PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieMapInitializeEngineData (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexDescriptor,
+ IN OUT PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+BOOLEAN
+PcieCheckPortPciDeviceMapping (
+ IN PCIe_PORT_DESCRIPTOR *PortDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+BOOLEAN
+PcieIsDescriptorLinkWidthValid (
+ IN PCIe_ENGINE_DESCRIPTOR *EngineDescriptor
+ );
+
+BOOLEAN
+PcieCheckLanesMatch (
+ IN PCIe_ENGINE_DESCRIPTOR *EngineDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+BOOLEAN
+PcieCheckDescriptorMapsToWrapper (
+ IN PCIe_ENGINE_DESCRIPTOR *EngineDescriptor,
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ );
+
+VOID
+PcieAllocateEngine (
+ IN UINT8 DescriptorIndex,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Configure engine list to support lane allocation according to configuration ID.
+ *
+ *
+ *
+ * @param[in] ComplexDescriptor Pointer to used define complex descriptor
+ * @param[in] Complex Pointer to complex descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_SUCCESS Topology successfully mapped
+ * @retval AGESA_ERROR Topology can not be mapped
+ */
+
+AGESA_STATUS
+PcieMapTopologyOnComplex (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexDescriptor,
+ IN PCIe_COMPLEX_CONFIG *Complex,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_SILICON_CONFIG *Silicon;
+ PCIe_WRAPPER_CONFIG *Wrapper;
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS Status;
+
+ AgesaStatus = AGESA_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMapTopologyOnComplex Enter\n");
+ Silicon = PcieConfigGetChildSilicon (Complex);
+ while (Silicon != NULL) {
+ Wrapper = PcieConfigGetChildWrapper (Silicon);
+ while (Wrapper != NULL) {
+ Status = PcieMapTopologyOnWrapper (ComplexDescriptor, Wrapper, Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_ERROR) {
+ PcieConfigDisableAllEngines (PciePortEngine | PcieDdiEngine, Wrapper);
+ IDS_HDT_CONSOLE (PCIE_MISC, " ERROR! Fail to map topology on %s Wrapper\n",
+ PcieFmDebugGetWrapperNameString (Wrapper)
+ );
+ ASSERT (FALSE);
+ }
+ Wrapper = PcieLibGetNextDescriptor (Wrapper);
+ }
+ Status = PcieMapPortsPciAddresses (Silicon, Pcie);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ Silicon = PcieLibGetNextDescriptor (Silicon);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMapTopologyOnComplex Exit [%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Configure engine list to support lane allocation according to configuration ID.
+ *
+ *
+ *
+ * @param[in] EngineType Engine type
+ * @param[in] ComplexDescriptor Pointer to used define complex descriptor
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @retval AGESA_SUCCESS Topology successfully mapped
+ * @retval AGESA_ERROR Topology can not be mapped
+ */
+STATIC AGESA_STATUS
+PcieEnginesToWrapper (
+ IN PCIE_ENGINE_TYPE EngineType,
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexDescriptor,
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ )
+{
+ AGESA_STATUS Status;
+ PCIe_ENGINE_CONFIG *EngineList;
+ PCIe_ENGINE_DESCRIPTOR *EngineDescriptor;
+ UINT8 ConfigurationId;
+ UINT8 Allocations;
+ UINTN Index;
+ UINTN NumberOfDescriptors;
+
+ ConfigurationId = 0;
+ Allocations = 0;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieEnginesToWrapper Enter\n");
+ NumberOfDescriptors = PcieInputParserGetNumberOfEngines (ComplexDescriptor);
+ do {
+ Status = PcieFmConfigureEnginesLaneAllocation (Wrapper, EngineType, ConfigurationId++);
+ if (Status == AGESA_SUCCESS) {
+ Allocations = 0;
+ for (Index = 0; Index < NumberOfDescriptors; Index++) {
+ EngineDescriptor = PcieInputParserGetEngineDescriptor (ComplexDescriptor, Index);
+ if (EngineDescriptor->EngineData.EngineType == EngineType) {
+ // Step 1, belongs to wrapper check.
+ if (PcieCheckDescriptorMapsToWrapper (EngineDescriptor, Wrapper)) {
+ ++Allocations;
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ while (EngineList != NULL) {
+ if (!PcieLibIsEngineAllocated (EngineList)) {
+ // Step 2.user descriptor less or equal to link width of engine
+ if (PcieCheckLanesMatch (EngineDescriptor, EngineList)) {
+ // Step 3, Check if link width is correct.x1, x2, x4, x8, x16.
+ if (!PcieIsDescriptorLinkWidthValid (EngineDescriptor)) {
+ PcieConfigDisableEngine (EngineList);
+ return AGESA_ERROR;
+ }
+ if (EngineDescriptor->EngineData.EngineType == PciePortEngine) {
+ // Step 4, Family specifc, port device number match engine device
+ if (PcieCheckPortPciDeviceMapping ((PCIe_PORT_DESCRIPTOR*) EngineDescriptor, EngineList)) {
+ //Step 5, Family specifc, lanes can be muxed.
+ if (PcieFmCheckPortPcieLaneCanBeMuxed ((PCIe_PORT_DESCRIPTOR*) EngineDescriptor, EngineList)) {
+ PcieAllocateEngine ((UINT8) Index, EngineList);
+ --Allocations;
+ break;
+ }
+ }
+ } else {
+ PcieAllocateEngine ((UINT8) Index, EngineList);
+ --Allocations;
+ break;
+ }
+ }
+ } //end if PcieLibIsEngineAllocated
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+ } //end if PcieCheckDescriptorMapsToWrapper
+ } // end if EngineType
+ } //end for
+ }
+ } while (Status == AGESA_SUCCESS && Allocations != 0);
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieEnginesToWrapper Exit [%x]\n", Status);
+ return Status;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if lane from user port descriptor (PCIe_PORT_DESCRIPTOR) belongs to wrapper (PCIe_WRAPPER_CONFIG)
+ *
+ *
+ * @param[in] EngineDescriptor Pointer to used define engine descriptor
+ * @param[in] Wrapper Pointer to PCIe_WRAPPER_CONFIG
+ * @retval TRUE Belongs to wrapper
+ * @retval FALSE Not belongs to wrapper
+ */
+BOOLEAN
+PcieCheckDescriptorMapsToWrapper (
+ IN PCIe_ENGINE_DESCRIPTOR *EngineDescriptor,
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ )
+{
+ BOOLEAN Result;
+ UINT16 DescriptorHiLane;
+ UINT16 DescriptorLoLane;
+ UINT16 DescriptorNumberOfLanes;
+
+ DescriptorLoLane = MIN (EngineDescriptor->EngineData.StartLane, EngineDescriptor->EngineData.EndLane);
+ DescriptorHiLane = MAX (EngineDescriptor->EngineData.StartLane, EngineDescriptor->EngineData.EndLane);
+ DescriptorNumberOfLanes = DescriptorHiLane - DescriptorLoLane + 1;
+ Result = FALSE;
+
+ if (Wrapper->StartPhyLane <= DescriptorLoLane && DescriptorHiLane <= Wrapper->EndPhyLane) {
+ // Lanes of descriptor belongs to wrapper
+ Result = TRUE;
+ }
+ return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set Engine to be allocated.
+ *
+ *
+ * @param[in] DescriptorIndex UINT8 index
+ * @param[in] Engine Pointer to engine config
+ */
+VOID
+PcieAllocateEngine (
+ IN UINT8 DescriptorIndex,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ PcieConfigSetDescriptorFlags (Engine, DESCRIPTOR_ALLOCATED);
+ Engine->Scratch = DescriptorIndex;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Configure engine list to support lane allocation according to configuration ID.
+ *
+ * PCIE port
+ *
+ *
+ * 1 Check if lane from user port descriptor (PCIe_PORT_DESCRIPTOR) belongs to wrapper (PCIe_WRAPPER_CONFIG)
+ * 2 Check if link width from user descriptor less or equal to link width of engine (PCIe_ENGINE_CONFIG)
+ * 3 Check if link width is correct. Correct link width for PCIe port x1, x2, x4, x8, x16, correct link width for DDI x4, x8
+ * 4 Check if user port device number (PCIe_PORT_DESCRIPTOR) match engine port device number (PCIe_ENGINE_CONFIG)
+ * 5 Check if lane can be muxed
+ *
+ *
+ * DDI Link
+ *
+ * 1 Check if lane from user port descriptor (PCIe_DDI_DESCRIPTOR) belongs to wrapper (PCIe_WRAPPER_CONFIG)
+ * 2 Check lane from (PCIe_DDI_DESCRIPTOR) match exactly phy lane (PCIe_ENGINE_CONFIG)
+ *
+ *
+ *
+ * @param[in] ComplexDescriptor Pointer to used define complex descriptor
+ * @param[in,out] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_SUCCESS Topology successfully mapped
+ * @retval AGESA_ERROR Topology can not be mapped
+ */
+AGESA_STATUS
+PcieMapTopologyOnWrapper (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexDescriptor,
+ IN OUT PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ AGESA_STATUS Status;
+ PCIe_ENGINE_CONFIG *EngineList;
+ UINT32 WrapperPhyLaneBitMap;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMapTopologyOnWrapper Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+ if (PcieLibIsPcieWrapper (Wrapper)) {
+ Status = PcieEnginesToWrapper (PciePortEngine, ComplexDescriptor, Wrapper);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_ERROR) {
+ // If we can not map topology on wrapper we can not enable any engines.
+ PutEventLog (
+ AGESA_ERROR,
+ GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION,
+ Wrapper->WrapId,
+ Wrapper->StartPhyLane,
+ Wrapper->EndPhyLane,
+ 0,
+ GnbLibGetHeader (Pcie)
+ );
+ PcieConfigDisableAllEngines (PciePortEngine, Wrapper);
+ }
+ }
+ if (PcieLibIsDdiWrapper (Wrapper)) {
+ Status = PcieEnginesToWrapper (PcieDdiEngine, ComplexDescriptor, Wrapper);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_ERROR) {
+ // If we can not map topology on wrapper we can not enable any engines.
+ PutEventLog (
+ AGESA_ERROR,
+ GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION,
+ Wrapper->WrapId,
+ Wrapper->StartPhyLane,
+ Wrapper->EndPhyLane,
+ 0,
+ GnbLibGetHeader (Pcie)
+ );
+ PcieConfigDisableAllEngines (PcieDdiEngine, Wrapper);
+ }
+ }
+ // Copy engine data
+ PcieMapInitializeEngineData (ComplexDescriptor, Wrapper, Pcie);
+
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ // Verify if we oversubscribe lanes and PHY link width
+ WrapperPhyLaneBitMap = 0;
+ while (EngineList != NULL) {
+ UINT32 EnginePhyLaneBitMap;
+ if (PcieLibIsEngineAllocated (EngineList)) {
+ EnginePhyLaneBitMap = PcieConfigGetEnginePhyLaneBitMap (EngineList);
+ if ((WrapperPhyLaneBitMap & EnginePhyLaneBitMap) != 0) {
+ IDS_HDT_CONSOLE (PCIE_MISC, " ERROR! Lanes double subscribe lanes [Engine Lanes %d..%d]\n",
+ EngineList->EngineData.StartLane,
+ EngineList->EngineData.EndLane
+ );
+ PutEventLog (
+ AGESA_ERROR,
+ GNB_EVENT_INVALID_LANES_CONFIGURATION,
+ EngineList->EngineData.StartLane,
+ EngineList->EngineData.EndLane,
+ 0,
+ 0,
+ GnbLibGetHeader (Pcie)
+ );
+ PcieConfigDisableEngine (EngineList);
+ Status = AGESA_ERROR;
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ } else {
+ WrapperPhyLaneBitMap |= EnginePhyLaneBitMap;
+ }
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMapTopologyOnWrapper Exit [%d]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize engine data
+ *
+ *
+ *
+ * @param[in] ComplexDescriptor Pointer to user defined complex descriptor
+ * @param[in,out] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieMapInitializeEngineData (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexDescriptor,
+ IN OUT PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ PCIe_ENGINE_DESCRIPTOR *EngineDescriptor;
+
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ while (EngineList != NULL) {
+ if (PcieLibIsEngineAllocated (EngineList)) {
+ if (EngineList->Scratch != 0xFF) {
+ EngineDescriptor = PcieInputParserGetEngineDescriptor (ComplexDescriptor, EngineList->Scratch);
+ LibAmdMemCopy (&EngineList->EngineData, &EngineDescriptor->EngineData, sizeof (EngineDescriptor->EngineData), GnbLibGetHeader (Pcie));
+ if (PcieLibIsDdiEngine (EngineList)) {
+ LibAmdMemCopy (&EngineList->Type.Ddi, &((PCIe_DDI_DESCRIPTOR*) EngineDescriptor)->Ddi, sizeof (PCIe_DDI_DATA), GnbLibGetHeader (Pcie));
+ EngineList->Type.Ddi.DisplayPriorityIndex = (UINT8) EngineList->Scratch;
+ } else if (PcieLibIsPcieEngine (EngineList)) {
+ LibAmdMemCopy (&EngineList->Type.Port, &((PCIe_PORT_DESCRIPTOR*) EngineDescriptor)->Port, sizeof (PCIe_PORT_DATA), GnbLibGetHeader (Pcie));
+ }
+ }
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Allocate PCI addresses for all PCIe engines on silicon
+ *
+ *
+ *
+ * @param[in] PortDescriptor Pointer to user defined engine descriptor
+ * @param[in] Engine Pointer engine configuration
+ * @retval TRUE Descriptor can be mapped to engine
+ * @retval FALSE Descriptor can NOT be mapped to engine
+ */
+
+BOOLEAN
+PcieCheckPortPciDeviceMapping (
+ IN PCIe_PORT_DESCRIPTOR *PortDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ BOOLEAN Result;
+
+ if ((PortDescriptor->Port.DeviceNumber == Engine->Type.Port.NativeDevNumber &&
+ PortDescriptor->Port.FunctionNumber == Engine->Type.Port.NativeFunNumber) ||
+ (PortDescriptor->Port.DeviceNumber == 0 && PortDescriptor->Port.FunctionNumber == 0)) {
+ Result = TRUE;
+ } else {
+ Result = PcieFmCheckPortPciDeviceMapping (PortDescriptor, Engine);
+ }
+
+ return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Allocate PCI addresses for all PCIe engines on silicon
+ *
+ *
+ *
+ * @param[in] Silicon Pointer to silicon configurration
+ * @param[in] Pcie Pointer PCIe configuration
+ * @retval AGESA_ERROR Fail to allocate PCI device address
+ * @retval AGESA_SUCCESS Successfully allocate PCI address for all PCIe ports
+ */
+
+AGESA_STATUS
+STATIC
+PcieMapPortsPciAddresses (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ PCIe_WRAPPER_CONFIG *WrapperList;
+ PCIe_ENGINE_CONFIG *EngineList;
+ AgesaStatus = AGESA_SUCCESS;
+ WrapperList = PcieConfigGetChildWrapper (Silicon);
+ while (WrapperList != NULL) {
+ EngineList = PcieConfigGetChildEngine (WrapperList);
+ while (EngineList != NULL) {
+ if (PcieLibIsPcieEngine (EngineList) && PcieLibIsEngineAllocated (EngineList)) {
+ Status = PcieFmMapPortPciAddress (EngineList);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_SUCCESS) {
+ EngineList->Type.Port.Address.AddressValue = MAKE_SBDFO (
+ 0,
+ Silicon->Address.Address.Bus,
+ EngineList->Type.Port.PortData.DeviceNumber,
+ EngineList->Type.Port.PortData.FunctionNumber,
+ 0
+ );
+ } else {
+ EngineList->Type.Port.PortData.PortPresent = OFF;
+ IDS_HDT_CONSOLE (PCIE_MISC, " ERROR! Fail to allocate PCI address for PCIe port\n"
+ );
+ //Report error
+ PutEventLog (
+ AGESA_ERROR,
+ GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION,
+ EngineList->Type.Port.PortData.DeviceNumber,
+ 0,
+ 0,
+ 0,
+ GnbLibGetHeader (Pcie)
+ );
+ }
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+ WrapperList = PcieLibGetNextDescriptor (WrapperList);
+ }
+ return AgesaStatus;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * If link width from user descriptor less or equal to link width of engine
+ *
+ *
+ * @param[in] EngineDescriptor Pointer to used define engine descriptor
+ * @param[in] Engine Pointer to engine config
+ * @retval TRUE Descriptor can be mapped to engine
+ * @retval FALSE Descriptor can NOT be mapped to engine
+ */
+
+BOOLEAN
+PcieCheckLanesMatch (
+ IN PCIe_ENGINE_DESCRIPTOR *EngineDescriptor,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ BOOLEAN Result;
+ UINT16 DescriptorHiLane;
+ UINT16 DescriptorLoLane;
+ UINT16 DescriptorNumberOfLanes;
+
+ DescriptorLoLane = MIN (EngineDescriptor->EngineData.StartLane, EngineDescriptor->EngineData.EndLane);
+ DescriptorHiLane = MAX (EngineDescriptor->EngineData.StartLane, EngineDescriptor->EngineData.EndLane);
+ DescriptorNumberOfLanes = DescriptorHiLane - DescriptorLoLane + 1;
+ Result = FALSE;
+
+ if (EngineDescriptor->EngineData.EngineType == PciePortEngine) {
+ //
+ // If link width from user descriptor less or equal to link width of engine (PCIe_ENGINE_CONFIG)
+ //
+ if (DescriptorNumberOfLanes <= PcieConfigGetNumberOfCoreLane (Engine)) {
+ Result = TRUE;
+ }
+ } else if (EngineDescriptor->EngineData.EngineType == PcieDdiEngine) {
+ //
+ //For Ddi, check lane from (PCIe_DDI_DESCRIPTOR) match exactly phy lane (PCIe_ENGINE_CONFIG)
+ //
+ if ((Engine->EngineData.StartLane == DescriptorLoLane) && (Engine->EngineData.EndLane == DescriptorHiLane)) {
+ Result = TRUE;
+ }
+ }
+
+ return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Correct link width for PCIe port x1, x2, x4, x8, x16, correct link width for DDI x4, x8
+ *
+ *
+ * @param[in] EngineDescriptor A pointer of PCIe_ENGINE_DESCRIPTOR
+ * @retval TRUE Descriptor can be mapped to engine
+ * @retval FALSE Descriptor can NOT be mapped to engine
+ */
+
+BOOLEAN
+PcieIsDescriptorLinkWidthValid (
+ IN PCIe_ENGINE_DESCRIPTOR *EngineDescriptor
+ )
+{
+ BOOLEAN Result;
+ UINT16 DescriptorHiLane;
+ UINT16 DescriptorLoLane;
+ UINT16 DescriptorNumberOfLanes;
+
+ Result = FALSE;
+ DescriptorLoLane = MIN (EngineDescriptor->EngineData.StartLane, EngineDescriptor->EngineData.EndLane);
+ DescriptorHiLane = MAX (EngineDescriptor->EngineData.StartLane, EngineDescriptor->EngineData.EndLane);
+ DescriptorNumberOfLanes = DescriptorHiLane - DescriptorLoLane + 1;
+
+ if (EngineDescriptor->EngineData.EngineType == PciePortEngine) {
+ if (DescriptorNumberOfLanes == 1 || DescriptorNumberOfLanes == 2 || DescriptorNumberOfLanes == 4 ||
+ DescriptorNumberOfLanes == 8 || DescriptorNumberOfLanes == 16) {
+ Result = TRUE;
+ }
+ } else if (EngineDescriptor->EngineData.EngineType == PcieDdiEngine) {
+ if (DescriptorNumberOfLanes == 4 || DescriptorNumberOfLanes == 8 || DescriptorNumberOfLanes == 7) {
+ Result = TRUE;
+ }
+ }
+
+ GNB_DEBUG_CODE (
+ if (!Result) {
+ IDS_HDT_CONSOLE (PCIE_MISC, " Invalid Link width [Engine Lanes %d..%d]\n",
+ DescriptorLoLane,
+ DescriptorHiLane
+ );
+ }
+ );
+
+ return Result;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieMapTopology.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieMapTopology.h
new file mode 100644
index 0000000..9cd49db
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieConfig/PcieMapTopology.h
@@ -0,0 +1,57 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Procedure to map user define topology to processor configuration
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIEMAPTOPOLOGY_H_
+#define _PCIEMAPTOPOLOGY_H_
+
+AGESA_STATUS
+PcieMapTopologyOnComplex (
+ IN PCIe_COMPLEX_DESCRIPTOR *ComplexDescriptor,
+ IN PCIe_COMPLEX_CONFIG *Complex,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/GnbPcieInitLibV1.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/GnbPcieInitLibV1.h
new file mode 100644
index 0000000..01cd353
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/GnbPcieInitLibV1.h
@@ -0,0 +1,60 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe Init Library
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIEINITLIBV1_H_
+#define _PCIEINITLIBV1_H_
+
+#include "PciePifServices.h"
+#include "PciePortRegAcc.h"
+#include "PciePowerMgmt.h"
+#include "PcieTimer.h"
+#include "PcieTopologyServices.h"
+#include "PcieUtilityLib.h"
+#include "PcieWrapperRegAcc.h"
+#include "PcieAspmExitLatency.h"
+#include "PcieSiliconServices.h"
+#include "PciePortServices.h"
+#include "PcieAspm.h"
+#include "PciePhyServices.h"
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieAspmBlackList.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieAspmBlackList.c
new file mode 100644
index 0000000..64e7cb3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieAspmBlackList.c
@@ -0,0 +1,173 @@
+/**
+ * @file
+ *
+ * PCIe link ASPM Black List
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "PcieAspmBlackList.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEASPMBLACKLIST_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+UINT16 AspmBrDeviceTable[] = {
+ 0x1002, 0x9441, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10B5, 0xFFFF, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x0402, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x0193, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x0422, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x0292, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x00F9, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x0141, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x0092, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x01D0, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x01D1, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x01D2, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x01D3, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x01D5, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x01D7, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x01D8, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x01DC, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x01DE, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x01DF, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x016A, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x10DE, 0x0392, (UINT16) ~(AspmL1 | AspmL0s),
+ 0x168C, 0xFFFF, (UINT16) ~(AspmL0s),
+ 0x1B4B, 0x91A3, (UINT16) ~(AspmL0s),
+ 0x1B4B, 0x9123, (UINT16) ~(AspmL0s),
+ 0x1969, 0x1083, (UINT16) ~(AspmL0s),
+ 0x1033, 0x0194, (UINT16) ~(AspmL0s),
+ 0x1180, 0xE832, (UINT16) ~(AspmL0s),
+ 0x1180, 0xE823, (UINT16) ~(AspmL0s)
+};
+
+UINT16 Aspm168cL0sEnabled[] = {
+ 0x002B,
+ 0x002C,
+ 0x002E,
+ 0x002A,
+ 0x002D,
+ 0x0024,
+ 0x001B,
+ 0x0030,
+ 0x0032
+};
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Pcie ASPM Black List
+ *
+ *
+ *
+ * @param[in] LinkAspm PCie ASPM black list
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+PcieAspmBlackListFeature (
+ IN PCIe_LINK_ASPM *LinkAspm,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 UpstreamDeviceId;
+ UINT32 DownstreamDeviceId;
+ UINTN i;
+ UINT32 DeviceId;
+ UINT32 VendorId;
+
+ GnbLibPciRead (LinkAspm->UpstreamPort.AddressValue, AccessWidth32, &UpstreamDeviceId, StdHeader);
+ GnbLibPciRead (LinkAspm->DownstreamPort.AddressValue, AccessWidth32, &DownstreamDeviceId, StdHeader);
+ LinkAspm->BlackList = FALSE;
+ for (i = 0; i < (sizeof (AspmBrDeviceTable) / sizeof (UINT16)); i = i + 3) {
+ VendorId = AspmBrDeviceTable[i];
+ DeviceId = AspmBrDeviceTable[i + 1];
+ if (VendorId == (UINT16)UpstreamDeviceId || VendorId == (UINT16)DownstreamDeviceId ) {
+ if (DeviceId == 0xFFFF || DeviceId == (UpstreamDeviceId >> 16) || DeviceId == (DownstreamDeviceId >> 16)) {
+ LinkAspm->UpstreamAspm &= AspmBrDeviceTable[i + 2];
+ LinkAspm->DownstreamAspm &= AspmBrDeviceTable[i + 2];
+ LinkAspm->BlackList = TRUE;
+ }
+ }
+ }
+ if ((UINT16)UpstreamDeviceId == 0x168c) {
+ // Atheros (Ignore dev capability enable L1 if requested)
+ LinkAspm->UpstreamAspm = LinkAspm->RequestedAspm & AspmL1;
+ LinkAspm->DownstreamAspm = LinkAspm->UpstreamAspm;
+ GnbLibPciRMW (LinkAspm->UpstreamPort.AddressValue | 0x70C, AccessS3SaveWidth32, 0x0, 0x0F003F01, StdHeader);
+
+ DeviceId = UpstreamDeviceId >> 16;
+ for (i = 0; i < (sizeof (Aspm168cL0sEnabled) / sizeof (UINT16)); i++) {
+ if (DeviceId == Aspm168cL0sEnabled[i]) {
+ LinkAspm->UpstreamAspm = LinkAspm->RequestedAspm & AspmL0sL1;
+ LinkAspm->DownstreamAspm = LinkAspm->UpstreamAspm & AspmL1;
+ }
+ }
+
+ }
+ if (UpstreamDeviceId == 0x10831969) {
+ GnbLibPciRMW (LinkAspm->UpstreamPort.AddressValue | 0x12F8, AccessS3SaveWidth32, 0xFFF7F7FF, 0, StdHeader);
+ }
+
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieAspmBlackList.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieAspmBlackList.h
new file mode 100644
index 0000000..3ae175d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieAspmBlackList.h
@@ -0,0 +1,55 @@
+/**
+ * @file
+ *
+ * PCIe ASPM Black List
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIEASPMBLACKLIST_H_
+#define _PCIEASPMBLACKLIST_H_
+
+///PCIe ASPM Black List
+
+AGESA_STATUS
+PcieAspmBlackListFeature (
+ IN PCIe_LINK_ASPM *LinkAspm,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieAspmExitLatency.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieAspmExitLatency.h
new file mode 100644
index 0000000..a6aff55
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieAspmExitLatency.h
@@ -0,0 +1,55 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to calculate PCIe topology segment maximum exit latency
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIEASPMEXITLATENCY_H_
+#define _PCIEASPMEXITLATENCY_H_
+
+VOID
+PcieAspmGetMaxExitLatency (
+ IN PCI_ADDR DownstreamPort,
+ OUT PCIe_ASPM_LATENCY_INFO *AspmLatencyInfo,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePhyServices.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePhyServices.h
new file mode 100644
index 0000000..9b8156b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePhyServices.h
@@ -0,0 +1,73 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe PHY initialization routine
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIEPHYSERVICES_H_
+#define _PCIEPHYSERVICES_H_
+
+VOID
+PciePhyApplyGanging (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePhyAvertClockPickers (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePhyChannelCharacteristic (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+AGESA_STATUS
+PciePhyForceDccRecalibration (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePifServices.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePifServices.c
new file mode 100644
index 0000000..2c9d1ce
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePifServices.c
@@ -0,0 +1,622 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe PIF initialization routine
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbRegistersCommon.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPIFSERVICES_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+#define PIF_GANG_0to1 0x1
+#define PIF_GANG_2to3 (0x1 << 1)
+#define PIF_GANG_4to5 (0x1 << 2)
+#define PIF_GANG_6to7 (0x1 << 3)
+#define PIF_GANG_0to3 (0x1 << 4)
+#define PIF_GANG_4to7 (0x1 << 8)
+#define PIF_GANG_0to7 (0x1 << 9)
+#define PIF_GANG_ALL (0x1 << 25)
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Apply PIF ganging for all lanes for given wrapper
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to Wrapper config descriptor
+ * @param[in] Pcie Pointer to PICe configuration data area
+ */
+
+
+VOID
+PciePifApplyGanging (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ UINT32 LaneBitmap;
+ UINT8 Pif;
+ D0F0xE4_PIF_0011_STRUCT D0F0xE4_PIF_0011[2];
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifApplyGanging Enter\n");
+ LibAmdMemFill (&D0F0xE4_PIF_0011, 0, sizeof (D0F0xE4_PIF_0011), GnbLibGetHeader (Pcie));
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ while (EngineList != NULL) {
+ if (PcieLibIsEngineAllocated (EngineList)) {
+ LaneBitmap = PcieUtilGetEngineLaneBitMap (LANE_TYPE_PCIE_PHY_NATIVE | LANE_TYPE_DDI_PHY_NATIVE, 0, EngineList);
+ switch (LaneBitmap) {
+ case 0x0003:
+ D0F0xE4_PIF_0011[0].Field.X2Lane10 = 0x1;
+ break;
+ case 0x000c:
+ D0F0xE4_PIF_0011[0].Field.X2Lane32 = 0x1;
+ break;
+ case 0x0030:
+ D0F0xE4_PIF_0011[0].Field.X2Lane54 = 0x1;
+ break;
+ case 0x00c0:
+ D0F0xE4_PIF_0011[0].Field.X2Lane76 = 0x1;
+ break;
+ case 0x000f:
+ D0F0xE4_PIF_0011[0].Field.X4Lane30 = 0x1;
+ break;
+ case 0x00f0:
+ D0F0xE4_PIF_0011[0].Field.X4Lane74 = 0x1;
+ break;
+ case 0x00ff:
+ D0F0xE4_PIF_0011[0].Field.X8Lane70 = 0x1;
+ break;
+ case 0x0300:
+ D0F0xE4_PIF_0011[1].Field.X2Lane10 = 1;
+ break;
+ case 0x0c00:
+ D0F0xE4_PIF_0011[1].Field.X2Lane32 = 0x1;
+ break;
+ case 0x3000:
+ D0F0xE4_PIF_0011[1].Field.X2Lane54 = 0x1;
+ break;
+ case 0xc000:
+ D0F0xE4_PIF_0011[1].Field.X2Lane76 = 0x1;
+ break;
+ case 0x0f00:
+ D0F0xE4_PIF_0011[1].Field.X4Lane30 = 0x1;
+ break;
+ case 0xf000:
+ D0F0xE4_PIF_0011[1].Field.X4Lane74 = 0x1;
+ break;
+ case 0xff00:
+ D0F0xE4_PIF_0011[1].Field.X8Lane70 = 0x1;
+ break;
+ case 0xffff:
+ D0F0xE4_PIF_0011[0].Field.MultiPif = 0x1;
+ D0F0xE4_PIF_0011[1].Field.MultiPif = 0x1;
+ break;
+ default:
+ break;
+ }
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+ for (Pif = 0; Pif < Wrapper->NumberOfPIFs; Pif++) {
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0011_ADDRESS),
+ D0F0xE4_PIF_0011[Pif].Value,
+ FALSE,
+ Pcie
+ );
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifApplyGanging Exit\n");
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PLL powerdown
+ *
+ *
+ * @param[in] LaneBitmap Power down PLL for these lanes
+ * @param[in] Wrapper Pointer to Wrapper config descriptor
+ * @param[in] Pcie Pointer to PICe configuration data area
+ */
+
+VOID
+PciePifPllPowerDown (
+ IN UINT32 LaneBitmap,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 Nibble;
+ UINT16 NibbleBitmap;
+ D0F0xE4_PIF_0012_STRUCT D0F0xE4_PIF_0012;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifPllPowerDown Enter\n");
+ for (Nibble = 0; Nibble < 4; Nibble++) {
+ NibbleBitmap = (0xF << (Nibble * 4));
+ if ((LaneBitmap & NibbleBitmap) == NibbleBitmap) {
+ D0F0xE4_PIF_0012.Value = PcieRegisterRead (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, (Nibble >> 1), D0F0xE4_PIF_0012_ADDRESS + (Nibble & 0x1)),
+ Pcie
+ );
+
+ D0F0xE4_PIF_0012.Field.PllPowerStateInTxs2 = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.PllPowerStateInOff = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.TxPowerStateInTxs2 = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.RxPowerStateInRxs2 = PifPowerStateOff;
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, (Nibble >> 1), D0F0xE4_PIF_0012_ADDRESS + (Nibble & 0x1)),
+ D0F0xE4_PIF_0012.Value,
+ TRUE,
+ Pcie
+ );
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifPllPowerDown Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PLL init for DDI
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to Wrapper config descriptor
+ * @param[in] Pcie Pointer to PICe configuration data area
+ */
+
+VOID
+PciePifPllInitForDdi (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 Nibble;
+ UINT32 LaneBitmap;
+ D0F0xE4_PIF_0012_STRUCT D0F0xE4_PIF_0012;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifPllInitForDdi Enter\n");
+ LaneBitmap = PcieUtilGetWrapperLaneBitMap (LANE_TYPE_DDI_PHY_NATIVE, 0, Wrapper);
+ for (Nibble = 0; Nibble < 4; Nibble++) {
+ if (LaneBitmap & (0xF << (Nibble * 4))) {
+ D0F0xE4_PIF_0012.Value = PcieRegisterRead (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, (Nibble >> 1), D0F0xE4_PIF_0012_ADDRESS + (Nibble & 0x1)),
+ Pcie
+ );
+
+ D0F0xE4_PIF_0012.Field.PllPowerStateInTxs2 = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.PllPowerStateInOff = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.PllRampUpTime = 0x2;
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, (Nibble >> 1), D0F0xE4_PIF_0012_ADDRESS + (Nibble & 0x1)),
+ D0F0xE4_PIF_0012.Value,
+ FALSE,
+ Pcie
+ );
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifPllInitForDdi Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Poll for on PIF to indicate action completion
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PciePollPifForCompeletion (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 Pif;
+ UINT32 Value;
+ for (Pif = 0; Pif < Wrapper->NumberOfPIFs; Pif++) {
+ do {
+ Value = PcieRegisterRead (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, 0x15),
+ Pcie
+ );
+ } while ((Value & 0xff) != 0xff);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Disable fifo reset
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to Wrapper config descriptor
+ * @param[in] Pcie Pointer to PICe configuration data area
+ */
+
+
+VOID
+PciePifDisableFifoReset (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 Pif;
+ for (Pif = 0; Pif < Wrapper->NumberOfPIFs; Pif++) {
+ PcieRegisterWriteField (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0010_ADDRESS),
+ D0F0xE4_PIF_0010_RxDetectFifoResetMode_OFFSET,
+ D0F0xE4_PIF_0010_RxDetectFifoResetMode_WIDTH,
+ 0,
+ FALSE,
+ Pcie
+ );
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Program LS2 exit time
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PciePifSetLs2ExitTime (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 Pif;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifSetLs2ExitTime Enter\n");
+ for (Pif = 0; Pif < Wrapper->NumberOfPIFs; Pif++) {
+ PcieRegisterWriteField (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0010_ADDRESS),
+ D0F0xE4_PIF_0010_Ls2ExitTime_OFFSET,
+ D0F0xE4_PIF_0010_Ls2ExitTime_WIDTH,
+ 0x0,
+ FALSE,
+ Pcie
+ );
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifSetLs2ExitTime Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set PLL mode for L1
+ *
+ *
+ * @param[in] LaneBitmap Power down PLL for these lanes
+ * @param[in] Wrapper Pointer to Wrapper config descriptor
+ * @param[in] Pcie Pointer to PICe configuration data area
+ */
+
+VOID
+PciePifSetPllModeForL1 (
+ IN UINT32 LaneBitmap,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 Nibble;
+ D0F0xE4_PIF_0012_STRUCT D0F0xE4_PIF_0012;
+ for (Nibble = 0; Nibble < 4; Nibble++) {
+ if (LaneBitmap & (0xF << (Nibble * 4))) {
+ D0F0xE4_PIF_0012.Value = PcieRegisterRead (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, (Nibble >> 1), D0F0xE4_PIF_0012_ADDRESS + (Nibble & 0x1)),
+ Pcie
+ );
+ D0F0xE4_PIF_0012.Field.RxPowerStateInRxs2 = PifPowerStateLS2;
+ D0F0xE4_PIF_0012.Field.TxPowerStateInTxs2 = PifPowerStateLS2;
+ D0F0xE4_PIF_0012.Field.PllPowerStateInTxs2 = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.PllPowerStateInOff = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.PllRampUpTime = 0x1;
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, (Nibble >> 1), D0F0xE4_PIF_0012_ADDRESS + (Nibble & 0x1)),
+ D0F0xE4_PIF_0012.Value,
+ TRUE,
+ Pcie
+ );
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Program receiver detection power mode
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PciePifSetRxDetectPowerMode (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 Pif;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifSetRxDetectPowerMode Enter\n");
+ for (Pif = 0; Pif < Wrapper->NumberOfPIFs; Pif++) {
+ PcieRegisterWriteField (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0010_ADDRESS),
+ D0F0xE4_PIF_0010_RxDetectTxPwrMode_OFFSET,
+ D0F0xE4_PIF_0010_RxDetectTxPwrMode_WIDTH,
+ 0x1,
+ FALSE,
+ Pcie
+ );
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifSetRxDetectPowerMode Enter\n");
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Pll ramp up time
+ *
+ *
+ *
+ * @param[in] Rampup Ramp up time
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PciePifSetPllRampTime (
+ IN PCIE_PLL_RAMPUP_TIME Rampup,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 Pif;
+ D0F0xE4_PIF_0012_STRUCT D0F0xE4_PIF_0012;
+ D0F0xE4_PIF_0013_STRUCT D0F0xE4_PIF_0013;
+ D0F0xE4_PIF_0010_STRUCT D0F0xE4_PIF_0010;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifSetPllRampTime Enter\n");
+ for (Pif = 0; Pif < Wrapper->NumberOfPIFs; Pif++) {
+ D0F0xE4_PIF_0012.Value = PcieRegisterRead (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0012_ADDRESS),
+ Pcie
+ );
+ D0F0xE4_PIF_0013.Value = PcieRegisterRead (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0013_ADDRESS),
+ Pcie
+ );
+ D0F0xE4_PIF_0010.Value = PcieRegisterRead (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0010_ADDRESS),
+ Pcie
+ );
+ if (Rampup == NormalRampup) {
+ D0F0xE4_PIF_0012.Field.PllRampUpTime = 0x1;
+ D0F0xE4_PIF_0013.Field.PllRampUpTime = 0x1;
+ D0F0xE4_PIF_0010.Field.Ls2ExitTime = 0x0;
+ } else {
+ D0F0xE4_PIF_0012.Field.PllRampUpTime = 0x3;
+ D0F0xE4_PIF_0013.Field.PllRampUpTime = 0x3;
+ D0F0xE4_PIF_0010.Field.Ls2ExitTime = 0x6;
+ }
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0012_ADDRESS),
+ D0F0xE4_PIF_0012.Value,
+ FALSE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0013_ADDRESS),
+ D0F0xE4_PIF_0013.Value,
+ FALSE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0010_ADDRESS),
+ D0F0xE4_PIF_0010.Value,
+ FALSE,
+ Pcie
+ );
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifSetPllRampTime Exit\n");
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Power down PIFs
+ *
+ *
+ *
+ * @param[in] Control Power up or Power down control
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PciePifPllPowerControl (
+ IN PCIE_PIF_POWER_CONTROL Control,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 Pif;
+ UINT8 PllPowerStateInOff;
+ PllPowerStateInOff = (Control == PowerDownPifs) ? PifPowerStateOff : PifPowerStateL0;
+ for (Pif = 0; Pif < Wrapper->NumberOfPIFs; Pif++) {
+ PcieRegisterWriteField (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0012_ADDRESS),
+ D0F0xE4_PIF_0012_PllPowerStateInOff_OFFSET,
+ D0F0xE4_PIF_0012_PllPowerStateInOff_WIDTH,
+ PllPowerStateInOff,
+ FALSE,
+ Pcie
+ );
+ PcieRegisterWriteField (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0013_ADDRESS),
+ D0F0xE4_PIF_0013_PllPowerStateInOff_OFFSET,
+ D0F0xE4_PIF_0013_PllPowerStateInOff_WIDTH,
+ PllPowerStateInOff,
+ FALSE,
+ Pcie
+ );
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Power down PIFs
+ *
+ *
+ *
+ * @param[in] Control Power up/Down control
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PciePifFullPowerStateControl (
+ IN PCIE_PIF_POWER_CONTROL Control,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 Pif;
+ D0F0xE4_PIF_0012_STRUCT D0F0xE4_PIF_0012;
+ D0F0xE4_PIF_0013_STRUCT D0F0xE4_PIF_0013;
+ for (Pif = 0; Pif < Wrapper->NumberOfPIFs; Pif++) {
+ D0F0xE4_PIF_0012.Value = PcieRegisterRead (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0012_ADDRESS),
+ Pcie
+ );
+ D0F0xE4_PIF_0013.Value = PcieRegisterRead (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0013_ADDRESS),
+ Pcie
+ );
+ if (Control == PowerDownPifs) {
+ D0F0xE4_PIF_0012.Field.PllPowerStateInOff = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.PllPowerStateInTxs2 = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.TxPowerStateInTxs2 = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.RxPowerStateInRxs2 = PifPowerStateOff;
+ D0F0xE4_PIF_0013.Field.PllPowerStateInOff = PifPowerStateOff;
+ D0F0xE4_PIF_0013.Field.PllPowerStateInTxs2 = PifPowerStateOff;
+ D0F0xE4_PIF_0013.Field.TxPowerStateInTxs2 = PifPowerStateOff;
+ D0F0xE4_PIF_0013.Field.RxPowerStateInRxs2 = PifPowerStateOff;
+ } else {
+ D0F0xE4_PIF_0012.Field.PllPowerStateInOff = PifPowerStateLS2;
+ D0F0xE4_PIF_0012.Field.PllPowerStateInTxs2 = PifPowerStateLS2;
+ D0F0xE4_PIF_0012.Field.TxPowerStateInTxs2 = PifPowerStateL0;
+ D0F0xE4_PIF_0012.Field.RxPowerStateInRxs2 = PifPowerStateL0;
+ D0F0xE4_PIF_0013.Field.PllPowerStateInOff = PifPowerStateLS2;
+ D0F0xE4_PIF_0013.Field.PllPowerStateInTxs2 = PifPowerStateLS2;
+ D0F0xE4_PIF_0013.Field.TxPowerStateInTxs2 = PifPowerStateL0;
+ D0F0xE4_PIF_0013.Field.RxPowerStateInRxs2 = PifPowerStateL0;
+ }
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0012_ADDRESS),
+ D0F0xE4_PIF_0012.Value,
+ FALSE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0013_ADDRESS),
+ D0F0xE4_PIF_0013.Value,
+ FALSE,
+ Pcie
+ );
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePifServices.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePifServices.h
new file mode 100644
index 0000000..50dca90
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePifServices.h
@@ -0,0 +1,120 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe PIF initialization routine
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIEPIFSERVICES_H_
+#define _PCIEPIFSERVICES_H_
+
+VOID
+PciePifApplyGanging (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifPllPowerDown (
+ IN UINT32 LaneBitmap,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifPllInitForDdi (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePollPifForCompeletion (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifDisableFifoReset (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifSetLs2ExitTime (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifSetPllModeForL1 (
+ IN UINT32 LaneBitmap,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifSetRxDetectPowerMode (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifSetPllRampTime (
+ IN PCIE_PLL_RAMPUP_TIME Rampup,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifPllPowerControl (
+ IN PCIE_PIF_POWER_CONTROL Control,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifFullPowerStateControl (
+ IN PCIE_PIF_POWER_CONTROL Control,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePortRegAcc.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePortRegAcc.c
new file mode 100644
index 0000000..3fc8561
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePortRegAcc.c
@@ -0,0 +1,273 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Supporting services to access PCIe port indirect register
+ * space.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbCommonLib.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPORTREGACC_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT32
+PciePortRegisterRead (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePortRegisterWrite (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+UINT32
+PciePortRegisterReadField (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePortRegisterWriteField (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePortRegisterRMW (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read PCIe port indirect register.
+ *
+ * Support for unify register access through index/data pair on PCIe port
+ *
+ * @param[in] Engine Pointer to Engine descriptor for this port
+ * @param[in] Address Register address
+ * @param[in] Pcie Pointer to internal configuration data area
+ * @retval Register Value
+ */
+
+UINT32
+PciePortRegisterRead (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 Value;
+ GnbLibPciWrite (Engine->Type.Port.Address.AddressValue | 0xE0, AccessWidth32, &Address, GnbLibGetHeader (Pcie));
+ GnbLibPciRead (Engine->Type.Port.Address.AddressValue | 0xE4, AccessWidth32, &Value, GnbLibGetHeader (Pcie));
+ return Value;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write PCIe Port Indirect register.
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Engine Pointer to Engine descriptor for this port
+ * @param[in] Address Register address
+ * @param[in] Value New register value
+ * @param[in] S3Save Save for S3 flag
+ * @param[in] Pcie Pointer to internal configuration data area
+ */
+VOID
+PciePortRegisterWrite (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ ASSERT (S3Save == TRUE || S3Save == FALSE);
+
+ IDS_HDT_CONSOLE (PCIE_PORTREG_TRACE, " *WR PCIEIND_P (%d:%d:%d):0x%04x = 0x%08x\n",
+ Engine->Type.Port.Address.Address.Bus,
+ Engine->Type.Port.Address.Address.Device,
+ Engine->Type.Port.Address.Address.Function,
+ Address,
+ Value
+ );
+ GnbLibPciWrite (Engine->Type.Port.Address.AddressValue | 0xE0, S3Save ? AccessS3SaveWidth32 : AccessWidth32, &Address, GnbLibGetHeader (Pcie));
+ GnbLibPciWrite (Engine->Type.Port.Address.AddressValue | 0xE4, S3Save ? AccessS3SaveWidth32 : AccessWidth32, &Value, GnbLibGetHeader (Pcie));
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write PCIe Port Indirect register field.
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Engine Pointer to Engine descriptor for this port
+ * @param[in] Address Register address
+ * @param[in] FieldOffset Field offset
+ * @param[in] FieldWidth Field width
+ * @param[in] S3Save Save for S3 flag
+ * @param[in] Value New register value
+ * @param[in] Pcie Pointer to internal configuration data area
+ */
+
+VOID
+PciePortRegisterWriteField (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 Data;
+ UINT32 Mask;
+ Data = PciePortRegisterRead (Engine, Address, Pcie);
+ Mask = (1 << FieldWidth) - 1;
+ Value &= Mask;
+ Data &= (~(Mask << FieldOffset));
+ PciePortRegisterWrite (Engine, Address, Data | (Value << FieldOffset), S3Save, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write PCIe Port Indirect register field.
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Engine Pointer to Engine descriptor for this port
+ * @param[in] Address Register address
+ * @param[in] FieldOffset Field offset
+ * @param[in] FieldWidth Field width
+ * @param[in] Pcie Pointer to internal configuration data area
+ * @retval Register Field Value.
+ */
+
+UINT32
+PciePortRegisterReadField (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 Value;
+ Value = PciePortRegisterRead (Engine, Address, Pcie);
+ Value = (Value >> FieldOffset) & ((1 << FieldWidth) - 1);
+ return Value;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read/Modify/Write PCIe port register.
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Engine Pointer to Engine descriptor for this port
+ * @param[in] Address Register address
+ * @param[in] AndMask Value & (~AndMask)
+ * @param[in] OrMask Value | OrMask
+ * @param[in] S3Save Save register for S3 (True/False)
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PciePortRegisterRMW (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 Value;
+ Value = PciePortRegisterRead (Engine, Address, Pcie);
+ Value = (Value & (~AndMask)) | OrMask;
+ PciePortRegisterWrite (Engine, Address, Value, S3Save, Pcie);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePortRegAcc.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePortRegAcc.h
new file mode 100644
index 0000000..a619548
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePortRegAcc.h
@@ -0,0 +1,94 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Supporting services to access PCIe port indirect register space.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIEPORTREGACC_H_
+#define _PCIEPORTREGACC_H_
+
+UINT32
+PciePortRegisterRead (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePortRegisterWrite (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePortRegisterWriteField (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+UINT32
+PciePortRegisterReadField (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePortRegisterRMW (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN UINT16 Address,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePortServices.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePortServices.c
new file mode 100644
index 0000000..c6688eb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePortServices.c
@@ -0,0 +1,396 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe port initialization service procedure
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbSbLib.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbRegistersCommon.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEPORTSERVICES_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+UINT8 L1State = 0x1b;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set completion timeout
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+PcieCompletionTimeout (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ GnbLibPciRMW (
+ Engine->Type.Port.Address.AddressValue | 0x80,
+ AccessWidth32,
+ 0xffffffff,
+ 0x6 << 0,
+ GnbLibGetHeader (Pcie)
+ );
+ if (Engine->Type.Port.PortData.LinkHotplug != HotplugDisabled) {
+ PciePortRegisterWriteField (
+ Engine,
+ 0x20,
+ 15,
+ 1,
+ 0x0,
+ TRUE,
+ Pcie
+ );
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init hotplug port
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+PcieLinkInitHotplug (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 Value;
+ if ((Engine->Type.Port.PortData.LinkHotplug == HotplugEnhanced) || (Engine->Type.Port.PortData.LinkHotplug == HotplugInboard)) {
+ Value = PciePortRegisterRead (Engine, 0xb5, Pcie);
+ Value |= 3 << 12;
+ Value |= 3 << 14;
+ Value |= 1 << 10;
+ PciePortRegisterWrite (
+ Engine,
+ 0xb5,
+ Value,
+ TRUE,
+ Pcie
+ );
+ PcieRegisterWriteField (
+ PcieConfigGetParentWrapper (Engine),
+ CORE_SPACE (Engine->Type.Port.CoreId, D0F0xE4_CORE_0010_ADDRESS),
+ D0F0xE4_CORE_0010_LcHotPlugDelSel_OFFSET,
+ D0F0xE4_CORE_0010_LcHotPlugDelSel_WIDTH,
+ 0x5,
+ TRUE,
+ Pcie
+ );
+ PcieRegisterWriteField (
+ PcieConfigGetParentWrapper (Engine),
+ WRAP_SPACE (PcieConfigGetParentWrapper (Engine)->WrapId, D0F0xE4_WRAP_8011_ADDRESS),
+ D0F0xE4_WRAP_8011_RcvrDetClkEnable_OFFSET,
+ D0F0xE4_WRAP_8011_RcvrDetClkEnable_WIDTH,
+ 0x1,
+ TRUE,
+ Pcie
+ );
+ }
+ if (Engine->Type.Port.PortData.LinkHotplug != HotplugDisabled) {
+ GnbLibPciRMW (
+ Engine->Type.Port.Address.AddressValue | 0x6c,
+ AccessS3SaveWidth32,
+ 0xffffffff,
+ 1 << 6,
+ GnbLibGetHeader (Pcie)
+ );
+ PciePortRegisterWriteField (
+ Engine,
+ 0x20,
+ 15,
+ 1,
+ 0x0,
+ TRUE,
+ Pcie
+ );
+ PciePortRegisterWriteField (
+ Engine,
+ 0x70,
+ 19,
+ 1,
+ 0x1,
+ FALSE,
+ Pcie
+ );
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set misc slot capability
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+PcieLinkSetSlotCap (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ GnbLibPciRMW (
+ Engine->Type.Port.Address.AddressValue | 0x58,
+ AccessWidth32,
+ 0xffffffff,
+ 1 << 24,
+ GnbLibGetHeader (Pcie)
+ );
+ GnbLibPciRMW (
+ Engine->Type.Port.Address.AddressValue | 0x3c,
+ AccessWidth32,
+ 0xffffffff,
+ 1 << 8,
+ GnbLibGetHeader (Pcie)
+ );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Safe mode to force link advertize Gen1 only capability in TS
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+PcieLinkSafeMode (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PcieFmSetLinkSpeedCap (PcieGen1, Engine, Pcie);
+ PciePortRegisterRMW (
+ Engine,
+ 0xa2,
+ 0x2000,
+ (1 << 13),
+ FALSE,
+ Pcie
+ );
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set current link speed
+ *
+ *
+ * @param[in] Engine Pointer to engine configuration descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+PcieSetLinkWidthCap (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PciePortRegisterRMW (
+ Engine,
+ 0xa2,
+ 0x2000,
+ 0,
+ FALSE,
+ Pcie
+ );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set current link speed
+ *
+ *
+ * @param[in] LinkSpeedCapability Link Speed Capability
+ * @param[in] Engine Pointer to engine configuration descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Force compliance
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+PcieForceCompliance (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ if (Engine->Type.Port.PortData.LinkSpeedCapability >= PcieGen2) {
+ GnbLibPciRMW (
+ Engine->Type.Port.Address.AddressValue | 0x88,
+ AccessWidth32,
+ 0xffffffff,
+ 0x1 << 4,
+ GnbLibGetHeader (Pcie)
+ );
+ } else if (Engine->Type.Port.PortData.LinkSpeedCapability == PcieGen1) {
+ PciePortRegisterWriteField (
+ Engine,
+ 0xc0,
+ 13,
+ 1,
+ 0x1,
+ FALSE,
+ Pcie
+ );
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable ASPM on SB link
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+PcieEnableAspm (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ if (Engine->Type.Port.PortData.LinkAspm != AspmDisabled) {
+ if (PcieConfigIsSbPcieEngine (Engine)) {
+ SbPcieLinkAspmControl (Engine, Pcie);
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Poll for link to get into L1
+ *
+ *
+ *
+ * @param[in] Engine Pointer to Engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PciePollLinkForL1Entry (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 LinkHwStateHistory[8];
+ do {
+ PcieUtilGetLinkHwStateHistory (Engine, &LinkHwStateHistory[0], sizeof (LinkHwStateHistory), Pcie);
+ } while (!PcieUtilSearchArray (LinkHwStateHistory, sizeof (LinkHwStateHistory), &L1State, sizeof (L1State)));
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Poll for link to get into L0
+ *
+ *
+ *
+ * @param[in] Engine Pointer to Engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PciePollLinkForL0Exit (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 LinkHwStateHistory[4];
+ do {
+ PcieUtilGetLinkHwStateHistory (Engine, &LinkHwStateHistory[0], sizeof (LinkHwStateHistory), Pcie);
+ } while (LinkHwStateHistory[0] != 0x10);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePortServices.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePortServices.h
new file mode 100644
index 0000000..67c66bb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePortServices.h
@@ -0,0 +1,118 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe port initialization service procedure
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIEPORTSERVICES_H_
+#define _PCIEPORTSERVICES_H_
+
+
+VOID
+PcieSetLinkSpeedCap (
+ IN PCIE_LINK_SPEED_CAP LinkSpeedCapability,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieSetLinkWidthCap (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieLinkSafeMode (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieCompletionTimeout (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieLinkSetSlotCap (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieLinkInitHotplug (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieForceCompliance (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieEnableSlotPowerLimit (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieEnableAspm (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePollLinkForL1Entry (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePollLinkForL0Exit (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePowerMgmt.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePowerMgmt.h
new file mode 100644
index 0000000..0eeee79
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PciePowerMgmt.h
@@ -0,0 +1,74 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Power saving features/services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIEPOWERSAVINGFEATURES_H_
+#define _PCIEPOWERSAVINGFEATURES_H_
+
+
+VOID
+PciePwrPowerDownUnusedLanes (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+UINT32
+PcieLanesToPowerDownPllInL1 (
+ IN UINT8 PllPowerUpLatency,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePwrAutoPowerDownElectricalIdleDetector (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePwrClockGating (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieSiliconServices.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieSiliconServices.h
new file mode 100644
index 0000000..66e59f4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieSiliconServices.h
@@ -0,0 +1,72 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe Complex Services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIESILICONSERVICES_H_
+#define _PCIESILICONSERVICES_H_
+
+UINT8
+PcieSiliconGetGen1VoltageIndex (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+PcieSiliconRequestVoltage (
+ IN UINT8 VidIndex,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+PcieSiliconUnHidePorts (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieSiliconHidePorts (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieTimer.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieTimer.c
new file mode 100644
index 0000000..2a7a0db
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieTimer.c
@@ -0,0 +1,95 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe timer access procedure
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 86079 $ @e \$Date: 2013-01-16 00:59:04 -0600 (Wed, 16 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbTimerLib.h"
+#include "GnbRegistersCommon.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIETIMER_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get PCIe timer timestamp
+ *
+ *
+ *
+ * @param[in] Pcie Pointer to internal configuration data area
+ * @retval Time stamp value
+ */
+
+UINT32
+PcieTimerGetTimeStamp (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ return GnbFmTimeStamp (GnbLibGetHeader (Pcie));
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieTimer.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieTimer.h
new file mode 100644
index 0000000..c68d214
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieTimer.h
@@ -0,0 +1,55 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe timer access procedure
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIETIMER_H_
+#define _PCIETIMER_H_
+
+UINT32
+PcieTimerGetTimeStamp (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#define TIMESTAMPS_DELTA(Time2, Time1) ((Time2 > Time1) ? (Time2 - Time1) : (0xffffffffull - Time1 + Time2))
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieTopologyServices.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieTopologyServices.c
new file mode 100644
index 0000000..5151fb4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieTopologyServices.c
@@ -0,0 +1,722 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe topology initialization service procedures.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbRegistersCommon.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIETOPOLOGYSERVICES_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Cleanup reconfig
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieTopologyCleanUpReconfig (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ if (PcieLibIsPcieWrapper (Wrapper)) {
+ PcieRegisterRMW (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
+ D0F0xE4_WRAP_8062_ConfigXferMode_MASK,
+ 1 << D0F0xE4_WRAP_8062_ConfigXferMode_OFFSET,
+ FALSE,
+ Pcie
+ );
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Prepare for reconfiguration
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieTopologyPrepareForReconfig (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ D0F0xE4_WRAP_8062_STRUCT D0F0xE4_WRAP_8062;
+ UINT8 CoreId;
+ if (PcieLibIsPcieWrapper (Wrapper)) {
+ for (CoreId = Wrapper->StartPcieCoreId; CoreId <= Wrapper->EndPcieCoreId; CoreId++) {
+ PcieRegisterWriteField (
+ Wrapper,
+ CORE_SPACE (CoreId, D0F0xE4_CORE_0011_ADDRESS),
+ D0F0xE4_CORE_0011_DynClkLatency_OFFSET,
+ D0F0xE4_CORE_0011_DynClkLatency_WIDTH,
+ 0xf,
+ FALSE,
+ Pcie
+ );
+ }
+
+ D0F0xE4_WRAP_8062.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
+ Pcie
+ );
+
+ D0F0xE4_WRAP_8062.Field.ConfigXferMode = 0x0;
+ D0F0xE4_WRAP_8062.Field.BlockOnIdle = 0x0;
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
+ D0F0xE4_WRAP_8062.Value,
+ FALSE,
+ Pcie
+ );
+ }
+}
+
+
+UINT8 LaneMuxSelectorTable[8] = { 0, 1, 2, 3, 4, 5, 6, 7 };
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Locate mux array index
+ *
+ *
+ *
+ * @param[in, out] LaneMuxSelectorArrayPtr Pointer to mux selector array
+ * @param[in] LaneMuxValue The value that match to array
+ * @retval Index Index successfully mapped
+ */
+STATIC UINT8
+PcieTopologyLocateMuxIndex (
+ IN OUT UINT8 *LaneMuxSelectorArrayPtr,
+ IN UINT8 LaneMuxValue
+ )
+{
+ UINT8 Index;
+ for (Index = 0; Index < sizeof (LaneMuxSelectorTable); Index++ ) {
+ if (LaneMuxSelectorArrayPtr [Index] == LaneMuxValue) {
+ return Index;
+ }
+ }
+ return 0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Apply lane mux
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PcieTopologyApplyLaneMux (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ UINT8 CurrentPhyLane;
+ UINT8 CurrentCoreLane;
+ UINT8 CoreLaneIndex;
+ UINT8 PhyLaneIndex;
+ UINT8 NumberOfPhyLane;
+ UINT8 TxLaneMuxSelectorArray [sizeof (LaneMuxSelectorTable)];
+ UINT8 RxLaneMuxSelectorArray [sizeof (LaneMuxSelectorTable)];
+ UINT8 Index;
+ UINT32 TxMaxSelectorValue;
+ UINT32 RxMaxSelectorValue;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyApplyLaneMux Enter\n");
+ if (PcieLibIsPcieWrapper (Wrapper)) {
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ LibAmdMemCopy (
+ &TxLaneMuxSelectorArray[0],
+ &LaneMuxSelectorTable[0],
+ sizeof (LaneMuxSelectorTable),
+ GnbLibGetHeader (Pcie)
+ );
+ LibAmdMemCopy (
+ &RxLaneMuxSelectorArray[0],
+ &LaneMuxSelectorTable[0],
+ sizeof (LaneMuxSelectorTable),
+ GnbLibGetHeader (Pcie)
+ );
+ while (EngineList != NULL) {
+ if (PcieLibIsPcieEngine (EngineList) && PcieLibIsEngineAllocated (EngineList)) {
+ CurrentPhyLane = (UINT8) PcieLibGetLoPhyLane (EngineList) - Wrapper->StartPhyLane;
+ NumberOfPhyLane = (UINT8) PcieConfigGetNumberOfPhyLane (EngineList);
+ CurrentCoreLane = (UINT8) EngineList->Type.Port.StartCoreLane;
+ if (PcieUtilIsLinkReversed (FALSE, EngineList, Pcie)) {
+ CurrentCoreLane = CurrentCoreLane + PcieConfigGetNumberOfCoreLane (EngineList) - NumberOfPhyLane;
+ }
+ for (Index = 0; Index < NumberOfPhyLane; Index = Index + 2 ) {
+ CoreLaneIndex = (CurrentCoreLane + Index) / 2;
+ PhyLaneIndex = (CurrentPhyLane + Index) / 2;
+
+ if (RxLaneMuxSelectorArray [CoreLaneIndex] != PhyLaneIndex) {
+ RxLaneMuxSelectorArray [PcieTopologyLocateMuxIndex (RxLaneMuxSelectorArray, PhyLaneIndex)] = RxLaneMuxSelectorArray [CoreLaneIndex];
+ RxLaneMuxSelectorArray [CoreLaneIndex] = PhyLaneIndex;
+ }
+ if (TxLaneMuxSelectorArray [PhyLaneIndex] != CoreLaneIndex) {
+ TxLaneMuxSelectorArray [PcieTopologyLocateMuxIndex (TxLaneMuxSelectorArray, CoreLaneIndex)] = TxLaneMuxSelectorArray [PhyLaneIndex];
+ TxLaneMuxSelectorArray [PhyLaneIndex] = CoreLaneIndex;
+ }
+ }
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+ RxMaxSelectorValue = 0;
+ TxMaxSelectorValue = 0;
+ for (Index = 0; Index < sizeof (LaneMuxSelectorTable); Index++) {
+ RxMaxSelectorValue |= (RxLaneMuxSelectorArray[Index] << (Index * 4));
+ TxMaxSelectorValue |= (TxLaneMuxSelectorArray[Index] << (Index * 4));
+ }
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8021_ADDRESS),
+ TxMaxSelectorValue,
+ FALSE,
+ Pcie
+ );
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8022_ADDRESS),
+ RxMaxSelectorValue,
+ FALSE,
+ Pcie
+ );
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyApplyLaneMux Exit\n");
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Select master PLL
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[out] ConfigChanged Pointer to boolean indicator that configuration was changed
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PcieTopologySelectMasterPll (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ OUT BOOLEAN *ConfigChanged,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ UINT16 MasterLane;
+ UINT16 MasterHotplugLane;
+ D0F0xE4_WRAP_8013_STRUCT D0F0xE4_WRAP_8013;
+ D0F0xE4_WRAP_8013_STRUCT D0F0xE4_WRAP_8013_BASE;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologySelectMasterPll Enter\n");
+ MasterLane = 0xFFFF;
+ MasterHotplugLane = 0xFFFF;
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ while (EngineList != NULL) {
+ if (PcieConfigIsEngineAllocated (EngineList) && EngineList->Type.Port.PortData.PortPresent != PortDisabled && PcieConfigIsPcieEngine (EngineList)) {
+ if (EngineList->Type.Port.PortData.LinkHotplug != HotplugDisabled) {
+ MasterHotplugLane = PcieConfigGetPcieEngineMasterLane (EngineList);
+ } else {
+ MasterLane = PcieConfigGetPcieEngineMasterLane (EngineList);
+ if (PcieConfigIsSbPcieEngine (EngineList)) {
+ break;
+ }
+ }
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+
+ if (MasterLane == 0xffff) {
+ if (MasterHotplugLane != 0xffff) {
+ MasterLane = MasterHotplugLane;
+ } else {
+ MasterLane = 0x0;
+ }
+ }
+
+ D0F0xE4_WRAP_8013.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8013_ADDRESS),
+ Pcie
+ );
+ D0F0xE4_WRAP_8013_BASE.Value = D0F0xE4_WRAP_8013.Value;
+ if ( MasterLane <= 3 ) {
+ D0F0xE4_WRAP_8013.Field.MasterPciePllA = 0x1;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllB = 0x0;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllC = 0x0;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllD = 0x0;
+ Wrapper->MasterPll = 0xA;
+ } else if (MasterLane <= 7) {
+ D0F0xE4_WRAP_8013.Field.MasterPciePllA = 0x0;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllB = 0x1;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllC = 0x0;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllD = 0x0;
+ Wrapper->MasterPll = 0xB;
+ } else if (MasterLane <= 11) {
+ D0F0xE4_WRAP_8013.Field.MasterPciePllA = 0x0;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllB = 0x0;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllC = 0x1;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllD = 0x0;
+ Wrapper->MasterPll = 0xC;
+ } else {
+ D0F0xE4_WRAP_8013.Field.MasterPciePllA = 0x0;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllB = 0x0;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllC = 0x0;
+ D0F0xE4_WRAP_8013.Field.MasterPciePllD = 0x1;
+ Wrapper->MasterPll = 0xD;
+ }
+ if (ConfigChanged != NULL) {
+ *ConfigChanged = (D0F0xE4_WRAP_8013.Value == D0F0xE4_WRAP_8013_BASE.Value) ? FALSE : TRUE;
+ }
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8013_ADDRESS),
+ D0F0xE4_WRAP_8013.Value,
+ FALSE,
+ Pcie
+ );
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologySelectMasterPll Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Execute/clean up reconfiguration
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieTopologyExecuteReconfig (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ D0F0xE4_WRAP_8062_STRUCT D0F0xE4_WRAP_8062;
+ D0F0xE4_WRAP_8060_STRUCT D0F0xE4_WRAP_8060;
+
+ if (PcieLibIsPcieWrapper (Wrapper)) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyExecuteReconfig Enter\n");
+
+ PcieTopologyServices136_fun (FALSE, Wrapper, Pcie);
+
+ D0F0xE4_WRAP_8062.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
+ Pcie
+ );
+ D0F0xE4_WRAP_8060.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8060_ADDRESS),
+ Pcie
+ );
+
+ D0F0xE4_WRAP_8062.Field.ReconfigureEn = 0x1;
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
+ D0F0xE4_WRAP_8062.Value,
+ FALSE,
+ Pcie
+ );
+ D0F0xE4_WRAP_8060.Field.Reconfigure = 0x1;
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8060_ADDRESS),
+ D0F0xE4_WRAP_8060.Value,
+ FALSE,
+ Pcie
+ );
+ do {
+ D0F0xE4_WRAP_8060.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8060_ADDRESS),
+ Pcie
+ );
+
+ } while (D0F0xE4_WRAP_8060.Field.Reconfigure == 1);
+ D0F0xE4_WRAP_8062.Field.ConfigXferMode = 0x1;
+ D0F0xE4_WRAP_8062.Field.ReconfigureEn = 0x0;
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
+ D0F0xE4_WRAP_8062.Value,
+ FALSE,
+ Pcie
+ );
+ PcieTopologyServices136_fun (TRUE, Wrapper, Pcie);
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyExecuteReconfig Exit\n");
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable lane reversal
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieTopologySetLinkReversal (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologySetLinkReversal Enter\n");
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ while (EngineList != NULL) {
+ if (PcieLibIsEngineAllocated (EngineList)) {
+ if (PcieLibIsPcieEngine (EngineList)) {
+ if (EngineList->EngineData.StartLane > EngineList->EngineData.EndLane) {
+ PciePortRegisterWriteField (
+ EngineList,
+ 0xc1,
+ 4,
+ 1,
+ 0x1,
+ FALSE,
+ Pcie
+ );
+ }
+ }
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologySetLinkReversal Exit\n");
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Reduce link width
+ *
+ *
+ * @param[in] LinkWidth Link width
+ * @param[in] Engine Pointer to Engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieTopologyReduceLinkWidth (
+ IN UINT8 LinkWidth,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_WRAPPER_CONFIG *Wrapper;
+ UINT32 LinkReversed;
+ UINT8 DeltaLinkWidthBitmap;
+ UINT32 LanesToDisable;
+ Wrapper = PcieConfigGetParentWrapper (Engine);
+ LinkReversed = PcieUtilIsLinkReversed (TRUE, Engine, Pcie);
+
+ DeltaLinkWidthBitmap = (1 << (PcieConfigGetNumberOfCoreLane (Engine) - LinkWidth)) - 1;
+ LanesToDisable = (DeltaLinkWidthBitmap << ((LinkReversed == 1) ? Engine->Type.Port.StartCoreLane : (Engine->Type.Port.StartCoreLane + LinkWidth)));
+
+ PcieTopologyLaneControl (
+ DisableLanes,
+ LanesToDisable,
+ Wrapper,
+ Pcie
+ );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Lanes enable/disable control
+ *
+ * @param[in] Control Lane control action
+ * @param[in] LaneBitMap Core lanes bitmap
+ * @param[in] Wrapper Pointer to Wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieTopologyLaneControl (
+ IN LANE_CONTROL Control,
+ IN UINT32 LaneBitMap,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ D0F0xE4_WRAP_8023_STRUCT D0F0xE4_WRAP_8023;
+ D0F0xE4_WRAP_8023.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8023_ADDRESS),
+ Pcie
+ );
+
+ if (Control == EnableLanes) {
+ D0F0xE4_WRAP_8023.Value |= LaneBitMap;
+ } else if (Control == DisableLanes) {
+ D0F0xE4_WRAP_8023.Value &= (~LaneBitMap);
+ }
+ D0F0xE4_WRAP_8023.Value &= ((1 << Wrapper->NumberOfLanes) - 1);
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8023_ADDRESS),
+ D0F0xE4_WRAP_8023.Value,
+ TRUE,
+ Pcie
+ );
+}
+
+VOID
+PcieTopologyServices136_fun (
+ IN BOOLEAN fv0,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ GNBREGCOMMON_STR1_STRUCT GNBREGCOMMON_STR1;
+ GNBREGCOMMON_STR1.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x8063),
+ Pcie
+ );
+ if (fv0) {
+ GNBREGCOMMON_STR1.Field.bit4 = 0x1;
+ GNBREGCOMMON_STR1.Field.bit5 = 0x1;
+ GNBREGCOMMON_STR1.Field.bit12 = 0x1;
+ GNBREGCOMMON_STR1.Field.bit13 = 0x1;
+ GNBREGCOMMON_STR1.Field.bit14 = 0x1;
+ } else {
+ GNBREGCOMMON_STR1.Field.bit4 = 0x0;
+ GNBREGCOMMON_STR1.Field.bit5 = 0x0;
+ GNBREGCOMMON_STR1.Field.bit12 = 0x0;
+ GNBREGCOMMON_STR1.Field.bit13 = 0x0;
+ GNBREGCOMMON_STR1.Field.bit14 = 0x0;
+ }
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, 0x8063),
+ GNBREGCOMMON_STR1.Value,
+ FALSE,
+ Pcie
+ );
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set core configuration according to PCIe port topology
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[out] ConfigChanged Pointer to boolean indicator that configuration was changed
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_SUCCESS Topology successfully mapped
+ * @retval AGESA_ERROR Topology can not be mapped
+ */
+
+AGESA_STATUS
+PcieTopologySetCoreConfig (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ OUT BOOLEAN *ConfigChanged,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 CoreId;
+ AGESA_STATUS Status;
+ D0F0xE4_WRAP_0080_STRUCT D0F0xE4_WRAP_0080;
+
+ Status = AGESA_SUCCESS;
+ if (PcieLibIsPcieWrapper (Wrapper)) {
+ for (CoreId = Wrapper->StartPcieCoreId; CoreId <= Wrapper->EndPcieCoreId; CoreId++) {
+ UINT64 ConfigurationSignature;
+ UINT8 NewConfigurationValue;
+ ConfigurationSignature = PcieConfigGetConfigurationSignature (Wrapper, CoreId);
+ Status = PcieFmGetCoreConfigurationValue (Wrapper, CoreId, ConfigurationSignature, &NewConfigurationValue);
+ if (Status == AGESA_SUCCESS) {
+ IDS_HDT_CONSOLE (PCIE_MISC, " Core Configuration: Wrapper [%s], CoreID [%d] - %s\n",
+ PcieFmDebugGetWrapperNameString (Wrapper),
+ CoreId,
+ PcieFmDebugGetCoreConfigurationString (Wrapper, NewConfigurationValue)
+ );
+ D0F0xE4_WRAP_0080.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_0080_ADDRESS),
+ Pcie
+ );
+ if (ConfigChanged != NULL) {
+ if (D0F0xE4_WRAP_0080.Field.StrapBifLinkConfig != NewConfigurationValue) {
+ *ConfigChanged = TRUE;
+ }
+ }
+ D0F0xE4_WRAP_0080.Field.StrapBifLinkConfig = NewConfigurationValue;
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_0080_ADDRESS),
+ D0F0xE4_WRAP_0080.Value,
+ FALSE,
+ Pcie
+ );
+ } else {
+ IDS_HDT_CONSOLE (PCIE_MISC, " ERROR! Core Configuration : Wrapper [%s], Signature [0x%x, 0x%x]\n",
+ PcieFmDebugGetWrapperNameString (Wrapper),
+ ((UINT32*)&ConfigurationSignature)[1],
+ ((UINT32*)&ConfigurationSignature)[0]
+ );
+ PcieConfigDisableAllEngines (PciePortEngine | PcieDdiEngine, Wrapper);
+ }
+ }
+ }
+ return Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set TX control for PCIe lanes
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieWrapSetTxS1CtrlForLaneMux (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ D0F0xE4_WRAP_8025_STRUCT D0F0xE4_WRAP_8025;
+ UINT32 LaneBitmap;
+ UINTN Index;
+ D0F0xE4_WRAP_8025.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8025_ADDRESS),
+ Pcie
+ );
+ Index = 0;
+ LaneBitmap = PcieUtilGetWrapperLaneBitMap (LANE_TYPE_CORE_ALL, LANE_TYPE_PCIE_SB_CORE_CONFIG, Wrapper);
+ while (LaneBitmap != 0) {
+ if ((LaneBitmap & 0xf) != 0) {
+ D0F0xE4_WRAP_8025.Value &= (~(0xff << (Index * 8)));
+ D0F0xE4_WRAP_8025.Value |= (((0x03 << 3) | 0x1) << (Index * 8));
+ }
+ LaneBitmap >>= 4;
+ ++Index;
+ }
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8025_ADDRESS),
+ D0F0xE4_WRAP_8025.Value,
+ FALSE,
+ Pcie
+ );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set TX control for lane muxes
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieWrapSetTxOffCtrlForLaneMux (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8025_ADDRESS),
+ 0x1f1f1f1f,
+ FALSE,
+ Pcie
+ );
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieTopologyServices.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieTopologyServices.h
new file mode 100644
index 0000000..00ffd58
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieTopologyServices.h
@@ -0,0 +1,135 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe topology initialization service procedures.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIETOPOLOGYSERVICES_H_
+#define _PCIETOPOLOGYSERVICES_H_
+
+VOID
+PcieTopologyCleanUpReconfig (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologyPrepareForReconfig (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+AGESA_STATUS
+PcieTopologySetCoreConfig (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ OUT BOOLEAN *ConfigChanged,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologyApplyLaneMux (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologySelectMasterPll (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ OUT BOOLEAN *ConfigChanged,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologyExecuteReconfig (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologySetLinkReversal (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+
+VOID
+PcieTopologyReduceLinkWidth (
+ IN UINT8 LinkWidth,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologyLaneControl (
+ IN LANE_CONTROL Control,
+ IN UINT32 LaneBitMap,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologyServices136_fun (
+ IN BOOLEAN fv0,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieSetDdiOwnPhy (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieWrapSetTxS1CtrlForLaneMux (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieWrapSetTxOffCtrlForLaneMux (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieUtilityLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieUtilityLib.c
new file mode 100644
index 0000000..6af26de
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieUtilityLib.c
@@ -0,0 +1,661 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe utility. Various supporting functions.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbRegistersCommon.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEUTILITYLIB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+/// Lane type
+typedef enum {
+ LaneTypeCore, ///< Core Lane
+ LaneTypePhy, ///< Package Phy Lane
+ LaneTypeNativePhy ///< Native Phy Lane
+} LANE_TYPE;
+
+/// Lane Property
+typedef enum {
+ LanePropertyConfig, ///< Configuration
+ LanePropertyActive, ///< Active
+ LanePropertyAllocated ///< Allocated
+} LANE_PROPERTY;
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+typedef struct {
+ UINT32 Flags;
+ PCIE_LINK_SPEED_CAP LinkSpeedCapability;
+} PCIE_GLOBAL_GEN_CAP_WORKSPACE;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get link state history from HW state machine
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[out] History Buffer to save history
+ * @param[in] Length Buffer length
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PcieUtilGetLinkHwStateHistory (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ OUT UINT8 *History,
+ IN UINT8 Length,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 ReadLength;
+ UINT32 LocalHistory [6];
+ UINT16 Index;
+ ASSERT (Length <= 16);
+ ASSERT (Length > 0);
+ if (Length > 6*4) {
+ Length = 6*4;
+ }
+ ReadLength = (Length + 3) / 4;
+ for (Index = 0; Index < ReadLength; Index++) {
+ LocalHistory[Index] = PciePortRegisterRead (
+ Engine,
+ 0xa5 + Index,
+ Pcie
+ );
+ }
+ LibAmdMemCopy (History, LocalHistory, Length, GnbLibGetHeader (Pcie));
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Search array for specific pattern
+ *
+ *
+ * @param[in] Buf1 Pointer to source buffer which will be subject of search
+ * @param[in] Buf1Length Length of the source buffer
+ * @param[in] Buf2 Pointer to pattern buffer
+ * @param[in] Buf2Length Length of the pattern buffer
+ * @retval TRUE Pattern found
+ * @retval TRUE Pattern not found
+ */
+
+BOOLEAN
+PcieUtilSearchArray (
+ IN UINT8 *Buf1,
+ IN UINTN Buf1Length,
+ IN UINT8 *Buf2,
+ IN UINTN Buf2Length
+ )
+{
+ UINT8 *CurrentBuf1Ptr;
+ CurrentBuf1Ptr = Buf1;
+ while (CurrentBuf1Ptr < (Buf1 + Buf1Length - Buf2Length)) {
+ UINT8 *SourceBufPtr;
+ UINT8 *PatternBufPtr;
+ UINTN PatternBufLength;
+ SourceBufPtr = CurrentBuf1Ptr;
+ PatternBufPtr = Buf2;
+ PatternBufLength = Buf2Length;
+ while ((*SourceBufPtr++ == *PatternBufPtr++) && (PatternBufLength-- != 0));
+ if (PatternBufLength == 0) {
+ return TRUE;
+ }
+ CurrentBuf1Ptr++;
+ }
+ return FALSE;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if link reversed
+ *
+ *
+ * @param[in] HwLinkState Check for HW auto link reversal
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to PCIe config descriptor
+ * @retval TRUE if link reversed
+ */
+BOOLEAN
+PcieUtilIsLinkReversed (
+ IN BOOLEAN HwLinkState,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 LinkReversal;
+
+ LinkReversal = (Engine->EngineData.StartLane > Engine->EngineData.EndLane) ? 1 : 0;
+ if (HwLinkState) {
+ UINT32 Value;
+ Value = PciePortRegisterRead (
+ Engine,
+ 0x50,
+ Pcie
+ );
+ LinkReversal ^= (Value & 1);
+ }
+ return ((LinkReversal & BIT0) != 0) ? TRUE : FALSE;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get link width detected during training
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval Link width
+ */
+UINT8
+PcieUtilGetLinkWidth (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 LinkWidth;
+ UINT32 Value;
+ Value = PciePortRegisterRead (
+ Engine,
+ 0xA2,
+ Pcie
+ );
+ switch ((Value & 7) >> 4) {
+ case 0x6:
+ LinkWidth = 16;
+ break;
+ case 0x5:
+ LinkWidth = 12;
+ break;
+ case 0x4:
+ LinkWidth = 8;
+ break;
+ case 0x3:
+ LinkWidth = 4;
+ break;
+ case 0x2:
+ LinkWidth = 2;
+ break;
+ case 0x1:
+ LinkWidth = 1;
+ break;
+ default:
+ LinkWidth = 0;
+ }
+ return LinkWidth;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get bitmap of PCIE engine lane of requested type
+ *
+ *
+ * @param[in] LaneType Lane type
+ * @param[in] LaneProperty Lane Property
+ * @param[in] Engine Pointer to engine config descriptor
+ * @retval Lane bitmap
+ */
+
+STATIC UINT32
+PcieUtilGetPcieEngineLaneBitMap (
+ IN LANE_TYPE LaneType,
+ IN LANE_PROPERTY LaneProperty,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ UINT32 LaneBitmap;
+ UINT8 Width;
+ UINT16 Offset;
+ UINT16 LoPhylane;
+ UINT16 HiPhylane;
+ PCIe_PLATFORM_CONFIG *Pcie;
+
+ Width = 0;
+ Offset = 0;
+ LaneBitmap = 0;
+ Pcie = (PCIe_PLATFORM_CONFIG *) PcieConfigGetParent (DESCRIPTOR_PLATFORM, &Engine->Header);
+
+ if (PcieConfigIsPcieEngine (Engine)) {
+ if (LaneType == LaneTypeCore && LaneProperty == LanePropertyConfig) {
+ Width = PcieConfigGetNumberOfCoreLane (Engine);
+ Offset = Engine->Type.Port.StartCoreLane;
+ LaneBitmap = ((1 << Width) - 1) << Offset;
+ } else if (PcieConfigIsEngineAllocated (Engine)) {
+ if (LaneType == LaneTypeNativePhy) {
+ LaneBitmap = PcieUtilGetPcieEngineLaneBitMap (LaneTypePhy, LaneProperty, Engine);
+ LaneBitmap = PcieFmGetNativePhyLaneBitmap (LaneBitmap, Engine);
+ } else {
+ if (LaneType == LaneTypeCore) {
+ if (LaneProperty == LanePropertyActive) {
+ Width = PcieUtilGetLinkWidth (Engine, Pcie);
+ Offset = PcieUtilIsLinkReversed (TRUE, Engine, Pcie) ? (Engine->Type.Port.EndCoreLane - Width + 1) : Engine->Type.Port.StartCoreLane;
+ } else if (LaneProperty == LanePropertyAllocated) {
+ Width = PcieConfigGetNumberOfPhyLane (Engine);
+ Offset = PcieUtilIsLinkReversed (FALSE, Engine, Pcie) ? (Engine->Type.Port.EndCoreLane - Width + 1) : Engine->Type.Port.StartCoreLane;
+ }
+ }
+ if (LaneType == LaneTypePhy) {
+ LoPhylane = PcieLibGetLoPhyLane (Engine);
+ HiPhylane = PcieLibGetHiPhyLane (Engine);
+ if (LaneProperty == LanePropertyActive) {
+ Width = PcieUtilGetLinkWidth (Engine, Pcie);
+ Offset = (PcieUtilIsLinkReversed (TRUE, Engine, Pcie) ? (HiPhylane - Width + 1) : LoPhylane) - PcieConfigGetParentWrapper (Engine)->StartPhyLane;
+ } else if (LaneProperty == LanePropertyAllocated) {
+ Width = PcieConfigGetNumberOfPhyLane (Engine);
+ Offset = LoPhylane - PcieConfigGetParentWrapper (Engine)->StartPhyLane;
+ }
+ }
+ LaneBitmap = ((1 << Width) - 1) << Offset;
+ }
+ }
+ }
+ return LaneBitmap;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get bitmap of PCIE engine lane of requested type
+ *
+ *
+ * @param[in] LaneType Lane type
+ * @param[in] LaneProperty Lane Property
+ * @param[in] Engine Pointer to engine config descriptor
+ * @retval Lane bitmap
+ */
+
+STATIC UINT32
+PcieUtilGetDdiEngineLaneBitMap (
+ IN LANE_TYPE LaneType,
+ IN LANE_PROPERTY LaneProperty,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ UINT32 LaneBitmap;
+ UINT8 Width;
+ UINT16 Offset;
+ Width = 0;
+ Offset = 0;
+ LaneBitmap = 0;
+ if (PcieConfigIsDdiEngine (Engine)) {
+ if (PcieConfigIsEngineAllocated (Engine)) {
+ if (LaneType == LaneTypePhy && ((LaneProperty == LanePropertyActive && (Engine->InitStatus & INIT_STATUS_DDI_ACTIVE)) || (LaneProperty == LanePropertyAllocated))) {
+ Width = PcieConfigGetNumberOfPhyLane (Engine);
+ Offset = PcieLibGetLoPhyLane (Engine) - PcieConfigGetParentWrapper (Engine)->StartPhyLane;
+ LaneBitmap = ((1 << Width) - 1) << Offset;
+ }
+ if (LaneType == LaneTypeNativePhy) {
+ LaneBitmap = PcieUtilGetDdiEngineLaneBitMap (LaneTypePhy, LaneProperty, Engine);
+ LaneBitmap = PcieFmGetNativePhyLaneBitmap (LaneBitmap, Engine);
+ }
+ }
+ }
+ return LaneBitmap;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get bitmap of engine lane of requested type
+ *
+ *
+ * @param[in] IncludeLaneType Include Lane type
+ * @param[in] ExcludeLaneType Exclude Lane type
+ * @param[in] Engine Pointer to engine config descriptor
+ * @retval Lane bitmap
+ */
+
+UINT32
+PcieUtilGetEngineLaneBitMap (
+ IN UINT32 IncludeLaneType,
+ IN UINT32 ExcludeLaneType,
+ IN PCIe_ENGINE_CONFIG *Engine
+ )
+{
+ UINT32 LaneBitmap;
+ LaneBitmap = 0;
+ if (IncludeLaneType & LANE_TYPE_PCIE_LANES) {
+ if (IncludeLaneType & LANE_TYPE_PCIE_CORE_CONFIG) {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypeCore, LanePropertyConfig, Engine);
+ }
+ if (IncludeLaneType & LANE_TYPE_PCIE_CORE_ALLOC) {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypeCore, LanePropertyAllocated, Engine);
+ }
+ if (IncludeLaneType & (LANE_TYPE_PCIE_CORE_ACTIVE | LANE_TYPE_PCIE_CORE_ALLOC_ACTIVE)) {
+ if (Engine->Type.Port.PortData.LinkHotplug == HotplugEnhanced || PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_PORT_IN_COMPLIANCE)) {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypeCore, LanePropertyAllocated, Engine);
+ } else if (PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_TRAINING_SUCCESS)) {
+ if (IncludeLaneType & LANE_TYPE_PCIE_CORE_ALLOC_ACTIVE) {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypeCore, LanePropertyAllocated, Engine);
+ } else {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypeCore, LanePropertyActive, Engine);
+ }
+ }
+ }
+ if ((IncludeLaneType & LANE_TYPE_PCIE_SB_CORE_CONFIG) && PcieConfigIsSbPcieEngine (Engine)) {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypeCore, LanePropertyConfig, Engine);
+ }
+ if ((IncludeLaneType & LANE_TYPE_PCIE_CORE_HOTPLUG) && (Engine->Type.Port.PortData.LinkHotplug != HotplugDisabled)) {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypeCore, LanePropertyAllocated, Engine);
+ }
+ if (IncludeLaneType & LANE_TYPE_PCIE_PHY) {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypePhy, LanePropertyAllocated, Engine);
+ }
+ if (IncludeLaneType & LANE_TYPE_PCIE_PHY_NATIVE) {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypeNativePhy, LanePropertyAllocated, Engine);
+ }
+ if (IncludeLaneType & (LANE_TYPE_PCIE_PHY_NATIVE_ACTIVE | LANE_TYPE_PCIE_PHY_NATIVE_ALLOC_ACTIVE)) {
+ if (Engine->Type.Port.PortData.LinkHotplug == HotplugEnhanced || PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_PORT_IN_COMPLIANCE)) {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypeNativePhy, LanePropertyAllocated, Engine);
+ } else if (PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_TRAINING_SUCCESS)) {
+ if (IncludeLaneType & LANE_TYPE_PCIE_PHY_NATIVE_ALLOC_ACTIVE) {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypeNativePhy, LanePropertyAllocated, Engine);
+ } else {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypeNativePhy, LanePropertyActive, Engine);
+ }
+ }
+ }
+ if ((IncludeLaneType & LANE_TYPE_PCIE_PHY_NATIVE_HOTPLUG) && (Engine->Type.Port.PortData.LinkHotplug != HotplugDisabled)) {
+ LaneBitmap |= PcieUtilGetPcieEngineLaneBitMap (LaneTypeNativePhy, LanePropertyAllocated, Engine);
+ }
+ }
+ if (IncludeLaneType & LANE_TYPE_DDI_LANES) {
+ if (IncludeLaneType & LANE_TYPE_DDI_PHY) {
+ LaneBitmap |= PcieUtilGetDdiEngineLaneBitMap (LaneTypePhy, LanePropertyAllocated, Engine);
+ }
+ if (IncludeLaneType & LANE_TYPE_DDI_PHY_NATIVE) {
+ LaneBitmap |= PcieUtilGetDdiEngineLaneBitMap (LaneTypeNativePhy, LanePropertyAllocated, Engine);
+ }
+ if (IncludeLaneType & LANE_TYPE_DDI_PHY_NATIVE_ACTIVE) {
+ LaneBitmap |= PcieUtilGetDdiEngineLaneBitMap (LaneTypeNativePhy, LanePropertyActive, Engine);
+ }
+ }
+ if (ExcludeLaneType != 0) {
+ LaneBitmap &= (~PcieUtilGetEngineLaneBitMap (ExcludeLaneType, 0, Engine));
+ }
+ return LaneBitmap;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get bitmap of phy lane confugred for master pll
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @retval Lane bitmap
+ */
+
+STATIC UINT32
+PcieUtilGetMasterPllLaneBitMap (
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ )
+{
+ if (Wrapper->MasterPll != 0) {
+ return 0xf << (Wrapper->MasterPll - 0xA) * 4;
+ }
+ return 0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get bitmap of Wrapper lane of requested type
+ *
+ *
+ * @param[in] IncludeLaneType Include Lane type
+ * @param[in] ExcludeLaneType Exclude Lane type
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @retval Lane bitmap
+ */
+
+UINT32
+PcieUtilGetWrapperLaneBitMap (
+ IN UINT32 IncludeLaneType,
+ IN UINT32 ExcludeLaneType,
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ UINT32 LaneBitmap;
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ LaneBitmap = 0;
+ if ((IncludeLaneType | ExcludeLaneType) != 0) {
+ if ((IncludeLaneType & LANE_TYPE_ALL) == LANE_TYPE_ALL) {
+ LaneBitmap = (1 << (Wrapper->NumberOfLanes)) - 1;
+ if (ExcludeLaneType != 0) {
+ LaneBitmap &= (~PcieUtilGetWrapperLaneBitMap (ExcludeLaneType, 0, Wrapper));
+ }
+ } else {
+ while (EngineList != NULL) {
+ LaneBitmap |= PcieUtilGetEngineLaneBitMap (IncludeLaneType, ExcludeLaneType, EngineList);
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+ if ((IncludeLaneType & LANE_TYPE_PCIE_PHY_NATIVE_MASTER_PLL) != 0) {
+ LaneBitmap |= PcieUtilGetMasterPllLaneBitMap (Wrapper);
+ }
+ if ((ExcludeLaneType & LANE_TYPE_PCIE_PHY_NATIVE_MASTER_PLL) != 0) {
+ LaneBitmap &= (~PcieUtilGetMasterPllLaneBitMap (Wrapper));
+ }
+ }
+ }
+ return LaneBitmap;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Program port register table
+ *
+ *
+ *
+ * @param[in] Table Pointer to table
+ * @param[in] Length number of entries
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] S3Save Save for S3 flag
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+PciePortProgramRegisterTable (
+ IN PCIE_PORT_REGISTER_ENTRY *Table,
+ IN UINTN Length,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINTN Index;
+ UINT32 Value;
+ for (Index = 0; Index < Length; Index++) {
+ Value = PciePortRegisterRead (
+ Engine,
+ Table[Index].Reg,
+ Pcie
+ );
+ Value &= (~Table[Index].Mask);
+ Value |= Table[Index].Data;
+ PciePortRegisterWrite (
+ Engine,
+ Table[Index].Reg,
+ Value,
+ S3Save,
+ Pcie
+ );
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Lock registers
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PcieLockRegisters (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 CoreId;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieLockRegisters Enter\n");
+ if (PcieLibIsPcieWrapper (Wrapper)) {
+ for (CoreId = Wrapper->StartPcieCoreId; CoreId <= Wrapper->EndPcieCoreId; CoreId++) {
+ PcieRegisterWriteField (
+ Wrapper,
+ CORE_SPACE (CoreId, D0F0xE4_CORE_0010_ADDRESS),
+ D0F0xE4_CORE_0010_HwInitWrLock_OFFSET,
+ D0F0xE4_CORE_0010_HwInitWrLock_WIDTH,
+ 0x1,
+ TRUE,
+ Pcie
+ );
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieLockRegisters Exit\n");
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Training state handling
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Indicate if engine in non final state
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PcieUtilGlobalGenCapabilityCallback (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIE_GLOBAL_GEN_CAP_WORKSPACE *GlobalGenCapability;
+ PCIE_LINK_SPEED_CAP LinkSpeedCapability;
+ PCIE_HOTPLUG_TYPE HotPlugType;
+ UINT32 Flags;
+
+ Flags = PCIE_GLOBAL_GEN_CAP_ALL_PORTS;
+ GlobalGenCapability = (PCIE_GLOBAL_GEN_CAP_WORKSPACE*) Buffer;
+ LinkSpeedCapability = PcieGen1;
+ if (PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_TRAINING_SUCCESS)) {
+ Flags |= PCIE_GLOBAL_GEN_CAP_TRAINED_PORTS;
+ }
+ HotPlugType = Engine->Type.Port.PortData.LinkHotplug;
+ if ((HotPlugType == HotplugBasic) || (HotPlugType == HotplugServer) || (HotPlugType == HotplugEnhanced)) {
+ Flags |= PCIE_GLOBAL_GEN_CAP_HOTPLUG_PORTS;
+ }
+ if ((GlobalGenCapability->Flags & Flags) != 0) {
+ ASSERT ((GlobalGenCapability->Flags & (PCIE_PORT_GEN_CAP_MAX | PCIE_PORT_GEN_CAP_BOOT)) != 0);
+ LinkSpeedCapability = PcieFmGetLinkSpeedCap (GlobalGenCapability->Flags, Engine);
+ if (GlobalGenCapability->LinkSpeedCapability < LinkSpeedCapability) {
+ GlobalGenCapability->LinkSpeedCapability = LinkSpeedCapability;
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Determine global GEN capability
+ *
+ *
+ * @param[in] Flags global GEN capability flags
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+PCIE_LINK_SPEED_CAP
+PcieUtilGlobalGenCapability (
+ IN UINT32 Flags,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIE_LINK_SPEED_CAP GlobalCapability;
+ PCIE_GLOBAL_GEN_CAP_WORKSPACE GlobalGenCap;
+
+ GlobalGenCap.LinkSpeedCapability = PcieGen1;
+ GlobalGenCap.Flags = Flags;
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_PCIE_ENGINE,
+ PcieUtilGlobalGenCapabilityCallback,
+ &GlobalGenCap,
+ Pcie
+ );
+
+ GlobalCapability = GlobalGenCap.LinkSpeedCapability;
+
+ return GlobalCapability;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieUtilityLib.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieUtilityLib.h
new file mode 100644
index 0000000..09f0903
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieUtilityLib.h
@@ -0,0 +1,131 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe utility. Various supporting functions.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIEUTILLIB_H_
+#define _PCIEUTILLIB_H_
+
+/// Core lanes
+typedef enum {
+ AllCoreLanes, ///< All core lanes
+ AllocatedCoreLanes, ///< Allocated core lanes
+ ActiveCoreLanes, ///< Active core lanes
+ HotplugCoreLanes, ///< Hot plug core lanes
+ SbCoreLanes, ///< South bridge core lanes
+} CORE_LANES;
+
+/// DDI lanes
+typedef enum {
+ DdiAllLanes, ///< All DDI Lanes
+ DdiActiveLanes ///< Active DDI Lanes
+} DDI_LANES;
+
+BOOLEAN
+PcieUtilSearchArray (
+ IN UINT8 *Buf1,
+ IN UINTN Buf1Length,
+ IN UINT8 *Buf2,
+ IN UINTN Buf2Length
+ );
+
+VOID
+PcieUtilGetLinkHwStateHistory (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ OUT UINT8 *History,
+ IN UINT8 Length,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+
+BOOLEAN
+PcieUtilIsLinkReversed (
+ IN BOOLEAN HwLinkState,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+
+UINT8
+PcieUtilGetLinkWidth (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+
+UINT32
+PcieUtilGetEngineLaneBitMap (
+ IN UINT32 IncludeLaneType,
+ IN UINT32 ExcludeLaneType,
+ IN PCIe_ENGINE_CONFIG *Engine
+ );
+
+UINT32
+PcieUtilGetWrapperLaneBitMap (
+ IN UINT32 IncludeLaneType,
+ IN UINT32 ExcludeLaneType,
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ );
+
+VOID
+PciePortProgramRegisterTable (
+ IN PCIE_PORT_REGISTER_ENTRY *Table,
+ IN UINTN Length,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieLockRegisters (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+PCIE_LINK_SPEED_CAP
+PcieUtilGlobalGenCapability (
+ IN UINT32 Flags,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieWrapperRegAcc.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieWrapperRegAcc.c
new file mode 100644
index 0000000..eed1d2f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieWrapperRegAcc.c
@@ -0,0 +1,300 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Supporting services to access PCIe wrapper/core/PIF/PHY indirect register spaces
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV1_PCIEWRAPPERREGACC_FILECODE
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read PCIe register value.
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Wrapper Pointer to Wrapper descriptor
+ * @param[in] Address Register address
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval Register Value
+ */
+UINT32
+PcieRegisterRead (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT32 Address,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ if ((Wrapper->Features.AccessEncoding == 1) && ((Address & 0xff0000) == 0x010000)) {
+ Address = (Address & 0xffff) | 0x1400000 | ((Address >> 8) & 0xF0000);
+ }
+ return PcieSiliconRegisterRead (PcieConfigGetParentSilicon (Wrapper), Address, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read PCIe register value.
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Silicon Pointer to silicon descriptor
+ * @param[in] Address Register address
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval Register Value
+ */
+
+UINT32
+PcieSiliconRegisterRead (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN UINT32 Address,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 Value;
+ GnbLibPciWrite (Silicon->Address.AddressValue | 0xE0, AccessWidth32, &Address, GnbLibGetHeader (Pcie));
+ GnbLibPciRead (Silicon->Address.AddressValue | 0xE4, AccessWidth32, &Value, GnbLibGetHeader (Pcie));
+ return Value;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write PCIe register value.
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Wrapper Pointer to wrapper descriptor
+ * @param[in] Address Register address
+ * @param[in] Value New register value
+ * @param[in] S3Save Save register for S3 (True/False)
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieRegisterWrite (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT32 Address,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ if ((Wrapper->Features.AccessEncoding == 1) && ((Address & 0xff0000) == 0x010000)) {
+ Address = (Address & 0xffff) | 0x1400000 | ((Address >> 8) & 0xF0000);
+ }
+ PcieSiliconRegisterWrite (
+ PcieConfigGetParentSilicon (Wrapper),
+ Address,
+ Value,
+ S3Save,
+ Pcie
+ );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write PCIe register value.
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Silicon Pointer to silicon descriptor
+ * @param[in] Address Register address
+ * @param[in] Value New register value
+ * @param[in] S3Save Save register for S3 (True/False)
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieSiliconRegisterWrite (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN UINT32 Address,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ IDS_HDT_CONSOLE (PCIE_HOSTREG_TRACE, " *WR %s (%d:%d:%d):0x%08x = 0x%08x\n",
+ PcieFmDebugGetHostRegAddressSpaceString (Silicon, (UINT16) (Address >> 16)),
+ Silicon->Address.Address.Bus,
+ Silicon->Address.Address.Device,
+ Silicon->Address.Address.Function,
+ Address,
+ Value
+ );
+ GnbLibPciWrite (Silicon->Address.AddressValue | 0xE0, S3Save ? AccessS3SaveWidth32 : AccessWidth32, &Address, GnbLibGetHeader (Pcie));
+ GnbLibPciWrite (Silicon->Address.AddressValue | 0xE4, S3Save ? AccessS3SaveWidth32 : AccessWidth32, &Value, GnbLibGetHeader (Pcie));
+}
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read PCIe register field.
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Wrapper Pointer to wrapper descriptor
+ * @param[in] Address Register address
+ * @param[in] FieldOffset Field offset
+ * @param[in] FieldWidth Field width
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval Register field value
+ */
+
+UINT32
+PcieRegisterReadField (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT32 Address,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 Value;
+ Value = PcieRegisterRead (Wrapper, Address, Pcie);
+ Value = (Value >> FieldOffset) & (~(0xFFFFFFFF << FieldWidth));
+ return Value;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write PCIe register field.
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Wrapper Pointer to wrapper descriptor
+ * @param[in] Address Register address
+ * @param[in] FieldOffset Field offset
+ * @param[in] FieldWidth Field width
+ * @param[in] Value Value to write
+ * @param[in] S3Save Save register for S3 (True/False)
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+
+VOID
+PcieRegisterWriteField (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT32 Address,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 TempValue;
+ UINT32 Mask;
+ TempValue = PcieRegisterRead (Wrapper, Address, Pcie);
+ Mask = (~(0xFFFFFFFF << FieldWidth));
+ Value &= Mask;
+ TempValue &= (~(Mask << FieldOffset));
+ PcieRegisterWrite (Wrapper, Address, TempValue | (Value << FieldOffset), S3Save, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read/Modify/Write PCIe register.
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Wrapper Pointer to wrapper descriptor
+ * @param[in] Address Register address
+ * @param[in] AndMask Value & (~AndMask)
+ * @param[in] OrMask Value | OrMask
+ * @param[in] S3Save Save register for S3 (True/False)
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PcieRegisterRMW (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT32 Address,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ if ((Wrapper->Features.AccessEncoding == 1) && ((Address & 0xff0000) == 0x010000)) {
+ Address = (Address & 0xffff) | 0x1400000 | ((Address >> 8) & 0xF0000);
+ }
+ PcieSiliconRegisterRMW (
+ PcieConfigGetParentSilicon (Wrapper),
+ Address,
+ AndMask,
+ OrMask,
+ S3Save,
+ Pcie
+ );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Read/Modify/Write PCIe register.
+ *
+ * Support for unify register access through index/data pair on GNB
+ *
+ * @param[in] Silicon Pointer to silicon descriptor
+ * @param[in] Address Register address
+ * @param[in] AndMask Value & (~AndMask)
+ * @param[in] OrMask Value | OrMask
+ * @param[in] S3Save Save register for S3 (True/False)
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PcieSiliconRegisterRMW (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN UINT32 Address,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 Value;
+ Value = PcieSiliconRegisterRead (Silicon, Address, Pcie);
+ Value = (Value & (~AndMask)) | OrMask;
+ PcieSiliconRegisterWrite (Silicon, Address, Value, S3Save, Pcie);
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieWrapperRegAcc.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieWrapperRegAcc.h
new file mode 100644
index 0000000..9a7e901
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV1/PcieWrapperRegAcc.h
@@ -0,0 +1,127 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Supporting services to access PCIe wrapper/core/PIF/PHY indirect register spaces
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _PCIEWRAPPERREGACC_H_
+#define _PCIEWRAPPERREGACC_H_
+
+//#define WRAP_SPACE(w, x) (0x01300000ul | (w << 16) | (x))
+//#define CORE_SPACE(c, x) (0x00010000ul | (c << 24) | (x))
+//#define PHY_SPACE(w, p, x) (0x00200000ul | ((p + 1) << 24) | (w << 16) | (x))
+//#define PIF_SPACE(w, p, x) (0x00100000ul | ((p + 1) << 24) | (w << 16) | (x))
+#define IMP_SPACE(x) (0x01080000ul | (x))
+
+UINT32
+PcieRegisterRead (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT32 Address,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieRegisterWrite (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT32 Address,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+UINT32
+PcieRegisterReadField (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT32 Address,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieRegisterWriteField (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT32 Address,
+ IN UINT8 FieldOffset,
+ IN UINT8 FieldWidth,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieRegisterRMW (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN UINT32 Address,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+UINT32
+PcieSiliconRegisterRead (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN UINT32 Address,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieSiliconRegisterWrite (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN UINT32 Address,
+ IN UINT32 Value,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieSiliconRegisterRMW (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN UINT32 Address,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask,
+ IN BOOLEAN S3Save,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/GnbPcieInitLibV4.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/GnbPcieInitLibV4.h
new file mode 100644
index 0000000..e6221ff
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/GnbPcieInitLibV4.h
@@ -0,0 +1,52 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe Init Library
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBPCIEINITLIBV4_H_
+#define _GNBPCIEINITLIBV4_H_
+
+#include "PcieWrapperServicesV4.h"
+#include "PciePowerMgmtV4.h"
+#include "PciePortServicesV4.h"
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PciePortServicesV4.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PciePortServicesV4.c
new file mode 100644
index 0000000..fc43dee
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PciePortServicesV4.c
@@ -0,0 +1,202 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe port initialization service procedure
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbRegistersCommonV2.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEPORTSERVICESV4_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+PcieInitPortForIommuV4 (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieSetLinkSpeedCapV4 (
+ IN PCIE_LINK_SPEED_CAP LinkSpeedCapability,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set current link speed
+ *
+ *
+ * @param[in] LinkSpeedCapability Link Speed Capability
+ * @param[in] Engine Pointer to engine configuration descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+PcieSetLinkSpeedCapV4 (
+ IN PCIE_LINK_SPEED_CAP LinkSpeedCapability,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ D2FxxE4_xA4_STRUCT D2FxxE4_xA4;
+ D2FxxE4_xC0_STRUCT D2FxxE4_xC0;
+ D2Fxx88_STRUCT D2Fxx88;
+ GnbLibPciRead (
+ Engine->Type.Port.Address.AddressValue | D2Fxx88_ADDRESS,
+ AccessWidth32,
+ &D2Fxx88.Value,
+ GnbLibGetHeader (Pcie)
+ );
+ D2FxxE4_xA4.Value = PciePortRegisterRead (
+ Engine,
+ D2FxxE4_xA4_ADDRESS,
+ Pcie
+ );
+ D2FxxE4_xC0.Value = PciePortRegisterRead (
+ Engine,
+ D2FxxE4_xC0_ADDRESS,
+ Pcie
+ );
+
+ switch (LinkSpeedCapability) {
+ case PcieGen2:
+ D2FxxE4_xA4.Field.LcGen2EnStrap = 0x1;
+ D2FxxE4_xA4.Field.LcMultUpstreamAutoSpdChngEn = 0x1;
+ D2Fxx88.Field.TargetLinkSpeed = 0x2;
+ D2Fxx88.Field.HwAutonomousSpeedDisable = 0x0;
+ break;
+ case PcieGen1:
+ D2FxxE4_xA4.Field.LcGen2EnStrap = 0x0;
+ D2FxxE4_xA4.Field.LcMultUpstreamAutoSpdChngEn = 0x0;
+ D2Fxx88.Field.TargetLinkSpeed = 0x1;
+ D2Fxx88.Field.HwAutonomousSpeedDisable = 0x1;
+ PcieRegisterWriteField (
+ PcieConfigGetParentWrapper (Engine),
+ WRAP_SPACE (PcieConfigGetParentWrapper (Engine)->WrapId, D0F0xE4_WRAP_0803_ADDRESS + 0x100 * Engine->Type.Port.PortId),
+ D0F0xE4_WRAP_0803_StrapBifDeemphasisSel_OFFSET,
+ D0F0xE4_WRAP_0803_StrapBifDeemphasisSel_WIDTH,
+ 0,
+ FALSE,
+ Pcie
+ );
+ break;
+ default:
+ ASSERT (FALSE);
+ break;
+ }
+
+ if (Pcie->PsppPolicy == PsppDisabled) {
+ D2FxxE4_xC0.Field.StrapAutoRcSpeedNegotiationDis = 0x0;
+ } else {
+ D2FxxE4_xC0.Field.StrapAutoRcSpeedNegotiationDis = 0x1;
+ }
+
+ PciePortRegisterWrite (
+ Engine,
+ D2FxxE4_xA4_ADDRESS,
+ D2FxxE4_xA4.Value,
+ FALSE,
+ Pcie
+ );
+ PciePortRegisterWrite (
+ Engine,
+ D2FxxE4_xC0_ADDRESS,
+ D2FxxE4_xC0.Value,
+ FALSE,
+ Pcie
+ );
+ GnbLibPciWrite (
+ Engine->Type.Port.Address.AddressValue | D2Fxx88_ADDRESS,
+ AccessWidth32,
+ &D2Fxx88.Value,
+ GnbLibGetHeader (Pcie)
+ );
+}
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable passing TLP prefix to IOMMU if IOMMU enabled
+ *
+ *
+ * @param[in] Engine Pointer to engine configuration descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+PcieInitPortForIommuV4 (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PciePortRegisterRMW (
+ Engine,
+ D2FxxE4_xC1_ADDRESS,
+ D2FxxE4_xC1_StrapE2EPrefixEn_MASK | D2FxxE4_xC1_StrapExtendedFmtSupported_MASK,
+ (1 << D2FxxE4_xC1_StrapE2EPrefixEn_OFFSET) | (1 << D2FxxE4_xC1_StrapExtendedFmtSupported_OFFSET),
+ TRUE,
+ Pcie
+ );
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PciePortServicesV4.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PciePortServicesV4.h
new file mode 100644
index 0000000..b6f485f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PciePortServicesV4.h
@@ -0,0 +1,64 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe port initialization service procedure
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIEPORTSERVICESV4_H_
+#define _PCIEPORTSERVICESV4_H_
+
+
+VOID
+PcieSetLinkSpeedCapV4 (
+ IN PCIE_LINK_SPEED_CAP LinkSpeedCapability,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieInitPortForIommuV4 (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PciePowerMgmtV4.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PciePowerMgmtV4.h
new file mode 100644
index 0000000..b55c2d4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PciePowerMgmtV4.h
@@ -0,0 +1,71 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Power saving features/services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIEPOWERSAVINGFEATURESV4_H_
+#define _PCIEPOWERSAVINGFEATURESV4_H_
+
+VOID
+PciePwrClockGatingV4 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePwrPowerDownDdiPllsV4 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieAcsCapabilityWrapperEnableV4 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieAcsCapabilityPortEnableV4 (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PcieWrapperServicesV4.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PcieWrapperServicesV4.c
new file mode 100644
index 0000000..2d1a9dd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PcieWrapperServicesV4.c
@@ -0,0 +1,204 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe wrapper services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbNbInitLibV4.h"
+#include "GnbRegistersCommonV2.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV4_PCIEWRAPPERSERVICESV4_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+PcieSetSsidV4 (
+ IN UINT32 Ssid,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologySetLinkReversalV4 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieSetDdiOwnPhyV4 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologyExecuteReconfigV4 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Relinquish control to DDI for specific lanes
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper configuration descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieSetDdiOwnPhyV4 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+
+ UINT32 LaneBitmap;
+ UINT8 Slice;
+ if (PcieLibIsDdiWrapper (Wrapper)) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieSetDdiOwnPhyV4 Enter\n");
+ LaneBitmap = PcieUtilGetWrapperLaneBitMap (LANE_TYPE_DDI_PHY_NATIVE, 0, Wrapper);
+ for (Slice = 0; Slice < 4; Slice++) {
+ if ((LaneBitmap & (1 << (Slice * 4))) != 0) {
+ PcieRegisterRMW (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8040_ADDRESS + Slice),
+ D0F0xE4_WRAP_8040_OwnSlice_MASK,
+ 1 << D0F0xE4_WRAP_8040_OwnSlice_OFFSET,
+ FALSE,
+ Pcie
+ );
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieSetDdiOwnPhyV4 Exit\n");
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set SSID
+ *
+ *
+ * @param[in] Ssid SSID
+ * @param[in] Wrapper Pointer to wrapper configuration descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieSetSsidV4 (
+ IN UINT32 Ssid,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ if (PcieLibIsPcieWrapper (Wrapper)) {
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_0046_ADDRESS),
+ Ssid,
+ FALSE,
+ Pcie
+ );
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable lane reversal
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieTopologySetLinkReversalV4 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologySetLinkReversal Enter\n");
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ while (EngineList != NULL) {
+ if (PcieLibIsEngineAllocated (EngineList)) {
+ if (PcieLibIsPcieEngine (EngineList)) {
+ if (EngineList->EngineData.StartLane > EngineList->EngineData.EndLane) {
+ PciePortRegisterWriteField (
+ EngineList,
+ D2FxxE4_xC1_ADDRESS,
+ D2FxxE4_xC1_StrapReverseLanes_OFFSET,
+ D2FxxE4_xC1_StrapReverseLanes_WIDTH,
+ 0x1,
+ FALSE,
+ Pcie
+ );
+ }
+ }
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologySetLinkReversal Exit\n");
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PcieWrapperServicesV4.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PcieWrapperServicesV4.h
new file mode 100644
index 0000000..52002ff
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV4/PcieWrapperServicesV4.h
@@ -0,0 +1,77 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe wrapper services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIEWRAPPERSERVICESV4_H_
+#define _PCIEWRAPPERSERVICESV4_H_
+
+
+VOID
+PcieSetDdiOwnPhyV4 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+
+VOID
+PcieTopologyExecuteReconfigV4 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieSetSsidV4 (
+ IN UINT32 Ssid,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologySetLinkReversalV4 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/GnbPcieInitLibV5.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/GnbPcieInitLibV5.h
new file mode 100644
index 0000000..f2bdf75
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/GnbPcieInitLibV5.h
@@ -0,0 +1,141 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe Init Library
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 87271 $ @e \$Date: 2013-01-31 10:11:23 -0600 (Thu, 31 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBPCIEINITLIBV5_H_
+#define _GNBPCIEINITLIBV5_H_
+
+VOID
+PciePifApplyGangingV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifPllPowerDownV5 (
+ IN UINT32 LaneBitmap,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologyApplyLaneMuxV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+BOOLEAN
+PcieTopologyIsGen3SupportedV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ );
+
+VOID
+PciePwrPowerDownUnusedLanesV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePwrClockGatingV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePortsVisibilityControlV5 (
+ IN PCIE_PORT_VISIBILITY Control,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieLinkInitHotplugV5 (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieEnableSlotPowerLimitV5 (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePhyApplyGangingV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePhyChannelCharacteristicV5 (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologyLaneControlV5 (
+ IN LANE_CONTROL Control,
+ IN UINT32 LaneBitMap,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologyReduceLinkWidthV5 (
+ IN UINT8 LinkWidth,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTopologyExecuteReconfigV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifSetLs2ExitTimeV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PciePhyServicesV5.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PciePhyServicesV5.c
new file mode 100644
index 0000000..bc50234
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PciePhyServicesV5.c
@@ -0,0 +1,111 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe PIF initialization routine
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbRegistersCommonV2.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPHYSERVICESV5_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+PciePhyApplyGangingV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePhyChannelCharacteristicV5 (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set PHY channel characteristic
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine configuration
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PciePhyChannelCharacteristicV5 (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ /// @todo
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PciePifServicesV5.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PciePifServicesV5.c
new file mode 100644
index 0000000..1f7dc65
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PciePifServicesV5.c
@@ -0,0 +1,269 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe PIF initialization routine
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 88079 $ @e \$Date: 2013-02-15 15:28:53 -0600 (Fri, 15 Feb 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbRegistersCommonV2.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPIFSERVICESV5_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+PciePifApplyGangingV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifPllPowerDownV5 (
+ IN UINT32 LaneBitmap,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PciePifSetLs2ExitTimeV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Apply PIF ganging for all lanes for given wrapper
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to Wrapper config descriptor
+ * @param[in] Pcie Pointer to PICe configuration data area
+ */
+
+
+VOID
+PciePifApplyGangingV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ UINT32 LaneBitmap;
+ D0F0xE4_PIF_0011_STRUCT D0F0xE4_PIF_0011;
+ D0F0xE4_PIF_0011.Value = 0;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifApplyGangingV5 Enter\n");
+ EngineList = PcieConfigGetChildEngine (Wrapper);
+ while (EngineList != NULL) {
+ if (PcieLibIsEngineAllocated (EngineList)) {
+ LaneBitmap = PcieUtilGetEngineLaneBitMap (LANE_TYPE_PCIE_PHY_NATIVE, 0, EngineList);
+ switch (LaneBitmap) {
+ case 0x0003:
+ D0F0xE4_PIF_0011.Field.X2Lane10 = 0x1;
+ break;
+ case 0x000c:
+ D0F0xE4_PIF_0011.Field.X2Lane32 = 0x1;
+ break;
+ case 0x0030:
+ D0F0xE4_PIF_0011.Field.X2Lane54 = 0x1;
+ break;
+ case 0x00c0:
+ D0F0xE4_PIF_0011.Field.X2Lane76 = 0x1;
+ break;
+ case 0x000f:
+ D0F0xE4_PIF_0011.Field.X4Lane30 = 0x1;
+ break;
+ case 0x00f0:
+ D0F0xE4_PIF_0011.Field.X4Lane74 = 0x1;
+ break;
+ case 0x00ff:
+ D0F0xE4_PIF_0011.Field.X8Lane70 = 0x1;
+ break;
+ case 0x0300:
+ D0F0xE4_PIF_0011.Field.X2Lane98 = 0x1;
+ break;
+ case 0x0c00:
+ D0F0xE4_PIF_0011.Field.X2Lane1110 = 0x1;
+ break;
+ case 0x3000:
+ D0F0xE4_PIF_0011.Field.X2Lane1312 = 0x1;
+ break;
+ case 0xc000:
+ D0F0xE4_PIF_0011.Field.X2Lane1514 = 0x1;
+ break;
+ case 0x0f00:
+ D0F0xE4_PIF_0011.Field.X4Lane118 = 0x1;
+ break;
+ case 0xf000:
+ D0F0xE4_PIF_0011.Field.X4Lane1512 = 0x1;
+ break;
+ case 0xff00:
+ D0F0xE4_PIF_0011.Field.X8Lane158 = 0x1;
+ break;
+ case 0xffff:
+ D0F0xE4_PIF_0011.Field.X16Lane150 = 0x1;
+ break;
+ default:
+ break;
+ }
+ }
+ EngineList = PcieLibGetNextDescriptor (EngineList);
+ }
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, 0, D0F0xE4_PIF_0011_ADDRESS),
+ D0F0xE4_PIF_0011.Value,
+ FALSE,
+ Pcie
+ );
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifApplyGangingV5 Exit\n");
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PLL powerdown
+ *
+ *
+ * @param[in] LaneBitmap Power down PLL for these lanes
+ * @param[in] Wrapper Pointer to Wrapper config descriptor
+ * @param[in] Pcie Pointer to PICe configuration data area
+ */
+
+VOID
+PciePifPllPowerDownV5 (
+ IN UINT32 LaneBitmap,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 Nibble;
+ UINT16 NibbleBitmap;
+ UINT16 PifRegAffress;
+ D0F0xE4_PIF_0012_STRUCT D0F0xE4_PIF_0012;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifPllPowerDownV5 Enter\n");
+ for (Nibble = 0; Nibble < 4; Nibble++) {
+ NibbleBitmap = (0xF << (Nibble * 4));
+ if ((LaneBitmap & NibbleBitmap) == NibbleBitmap) {
+ PifRegAffress = ((Nibble < 2) ? D0F0xE4_PIF_0012_ADDRESS : D0F0xE4_PIF_0017_ADDRESS) + (Nibble & 0x1);
+ D0F0xE4_PIF_0012.Value = PcieRegisterRead (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, 0, PifRegAffress),
+ Pcie
+ );
+
+ D0F0xE4_PIF_0012.Field.PllPowerStateInTxs2 = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.PllPowerStateInOff = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.TxPowerStateInTxs2 = PifPowerStateOff;
+ D0F0xE4_PIF_0012.Field.RxPowerStateInRxs2 = PifPowerStateOff;
+ PcieRegisterWrite (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, 0, PifRegAffress),
+ D0F0xE4_PIF_0012.Value,
+ TRUE,
+ Pcie
+ );
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifPllPowerDownV5 Exit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Program LS2 exit time
+ *
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+PciePifSetLs2ExitTimeV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 Pif;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifSetLs2ExitTimeV5 Enter\n");
+ for (Pif = 0; Pif < Wrapper->NumberOfPIFs; Pif++) {
+ PcieRegisterWriteField (
+ Wrapper,
+ PIF_SPACE (Wrapper->WrapId, Pif, D0F0xE4_PIF_0010_ADDRESS),
+ D0F0xE4_PIF_0010_Ls2ExitTime_OFFSET,
+ D0F0xE4_PIF_0010_Ls2ExitTime_WIDTH,
+ 0x5,
+ FALSE,
+ Pcie
+ );
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PciePifSetLs2ExitTimeV5 Exit\n");
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PciePortServicesV5.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PciePortServicesV5.c
new file mode 100644
index 0000000..803d134
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PciePortServicesV5.c
@@ -0,0 +1,147 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe port initialization service procedure
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbSbLib.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbPcieInitLibV5.h"
+#include "GnbRegistersCommonV2.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEPORTSERVICESV5_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init hotplug port
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+PcieLinkInitHotplugV5 (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 Value;
+ PcieLinkInitHotplug (Engine, Pcie);
+ if (Engine->Type.Port.PortData.LinkHotplug == HotplugEnhanced) {
+ Value = 1;
+ } else {
+ Value = 0;
+ }
+ PciePortRegisterWriteField (
+ Engine,
+ 0x10,
+ 3,
+ 1,
+ Value,
+ TRUE,
+ Pcie
+ );
+}
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set slot power limit
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine configuration
+ * @param[in] Pcie Pointer to PCIe configuration
+ */
+
+
+VOID
+PcieEnableSlotPowerLimitV5 (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_SILICON_CONFIG *Silicon;
+ if (PcieLibIsEngineAllocated (Engine) && Engine->Type.Port.PortData.PortPresent != PortDisabled && !PcieConfigIsSbPcieEngine (Engine)) {
+ IDS_HDT_CONSOLE (PCIE_MISC, " Enable Slot Power Limit for Port % d\n", Engine->Type.Port.Address.Address.Device);
+ Silicon = PcieConfigGetParentSilicon (Engine);
+ GnbLibPciIndirectRMW (
+ Silicon->Address.AddressValue | D0F0xC8_ADDRESS,
+ D0F0xCC_x01_ADDRESS | ((Engine->Type.Port.PortData.DeviceNumber << 3 | Engine->Type.Port.PortData.FunctionNumber) << D0F0xC8_NB_DEV_IND_SEL_OFFSET),
+ AccessS3SaveWidth32,
+ 0xffffffff,
+ 1 << D0F0xCC_x01_SetPowEn_OFFSET,
+ GnbLibGetHeader (Pcie)
+ );
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PcieSiliconServicesV5.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PcieSiliconServicesV5.c
new file mode 100644
index 0000000..0b2be80
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PcieSiliconServicesV5.c
@@ -0,0 +1,198 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Family specific PCIe complex initialization services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieInitLibV5.h"
+#include "GnbRegistersCommonV2.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIESILICONSERVICESV5_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+PcieSiliconControlPortsV5 (
+ IN PCIE_PORT_VISIBILITY Control,
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+STATIC
+PcieSiliconEnablePortsV5 (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Control port visibility in PCI config space
+ *
+ *
+ * @param[in] Control Control Hide/Unhide ports
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PciePortsVisibilityControlV5 (
+ IN PCIE_PORT_VISIBILITY Control,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_SILICON_CONFIG *SiliconList;
+ SiliconList = (PCIe_SILICON_CONFIG *) PcieConfigGetChild (DESCRIPTOR_SILICON, &Pcie->Header);
+ while (SiliconList != NULL) {
+ switch (Control) {
+ case UnhidePorts:
+ PcieSiliconControlPortsV5 (UnhidePorts, SiliconList, Pcie);
+ break;
+ case HidePorts:
+ PcieSiliconControlPortsV5 (HidePorts, SiliconList, Pcie);
+ PcieSiliconEnablePortsV5 (SiliconList, Pcie);
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ SiliconList = (PCIe_SILICON_CONFIG *) PcieConfigGetNextTopologyDescriptor (SiliconList, DESCRIPTOR_TERMINATE_TOPOLOGY);
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Hide/Unhide all ports
+ *
+ *
+ * @param[in] Control Control Hide/Unhide ports
+ * @param[in] Silicon Pointer to silicon configuration descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+
+VOID
+STATIC
+PcieSiliconControlPortsV5 (
+ IN PCIE_PORT_VISIBILITY Control,
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ UINT32 Value;
+ Value = (Control == HidePorts) ? ((1 << D0F0xCC_x01_BridgeDis_OFFSET) | (1 << D0F0xCC_x01_CfgDis_OFFSET)) : 0;
+ EngineList = PcieConfigGetChildEngine (Silicon);
+ while (EngineList != NULL) {
+ if (PcieConfigIsPcieEngine (EngineList)) {
+ GnbLibPciIndirectRMW (
+ Silicon->Address.AddressValue | D0F0xC8_ADDRESS,
+ D0F0xCC_x01_ADDRESS | ((EngineList->Type.Port.NativeDevNumber << 3 | EngineList->Type.Port.NativeFunNumber) << D0F0xC8_NB_DEV_IND_SEL_OFFSET),
+ AccessS3SaveWidth32,
+ (UINT32)~(D0F0xCC_x01_BridgeDis_MASK | D0F0xCC_x01_CfgDis_MASK | D0F0xCC_x01_CsrEnable_MASK | D0F0xCC_x01_SetPowEn_MASK),
+ Value,
+ GnbLibGetHeader (Pcie)
+ );
+ }
+ EngineList = (PCIe_ENGINE_CONFIG *) PcieConfigGetNextTopologyDescriptor (EngineList, DESCRIPTOR_TERMINATE_GNB);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Hide unused ports
+ *
+ *
+ *
+ * @param[in] Silicon Pointer to silicon configuration data area
+ * @param[in] Pcie Pointer to data area up to 256 byte
+ */
+
+VOID
+STATIC
+PcieSiliconEnablePortsV5 (
+ IN PCIe_SILICON_CONFIG *Silicon,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_ENGINE_CONFIG *EngineList;
+ EngineList = PcieConfigGetChildEngine (Silicon);
+ while (EngineList != NULL) {
+ if (PcieConfigIsPcieEngine (EngineList)) {
+ if (!PcieConfigIsSbPcieEngine (EngineList) &&
+ (PcieConfigCheckPortStatus (EngineList, INIT_STATUS_PCIE_TRAINING_SUCCESS) ||
+ ((EngineList->Type.Port.PortData.LinkHotplug != HotplugDisabled) &&
+ (EngineList->Type.Port.PortData.LinkHotplug != HotplugInboard)))) {
+ GnbLibPciIndirectRMW (
+ Silicon->Address.AddressValue | D0F0xC8_ADDRESS,
+ D0F0xCC_x01_ADDRESS | ((EngineList->Type.Port.PortData.DeviceNumber << 3 | EngineList->Type.Port.PortData.FunctionNumber) << D0F0xC8_NB_DEV_IND_SEL_OFFSET),
+ AccessS3SaveWidth32,
+ (UINT32)~(D0F0xCC_x01_BridgeDis_MASK | D0F0xCC_x01_CfgDis_MASK | D0F0xCC_x01_CsrEnable_MASK | D0F0xCC_x01_SetPowEn_MASK),
+ ((1 << D0F0xCC_x01_CsrEnable_OFFSET) | (1 << D0F0xCC_x01_SetPowEn_OFFSET)),
+ GnbLibGetHeader (Pcie)
+ );
+ }
+ }
+ EngineList = (PCIe_ENGINE_CONFIG *) PcieConfigGetNextTopologyDescriptor (EngineList, DESCRIPTOR_TERMINATE_GNB);
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PcieTopologyServicesV5.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PcieTopologyServicesV5.c
new file mode 100644
index 0000000..9c602e1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PcieTopologyServicesV5.c
@@ -0,0 +1,152 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe topology initialization service procedures.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbPcieInitLibV5.h"
+#include "GnbRegistersCommonV2.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIETOPOLOGYSERVICESV5_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Lanes enable/disable control
+ *
+ * @param[in] Control Lane control action
+ * @param[in] LaneBitMap Core lanes bitmap
+ * @param[in] Wrapper Pointer to Wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieTopologyLaneControlV5 (
+ IN LANE_CONTROL Control,
+ IN UINT32 LaneBitMap,
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ D0F0xE4_WRAP_8029_STRUCT D0F0xE4_WRAP_8029;
+ D0F0xE4_WRAP_8029.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8029_ADDRESS),
+ Pcie
+ );
+
+ if (Control == EnableLanes) {
+ D0F0xE4_WRAP_8029.Value |= LaneBitMap;
+ } else if (Control == DisableLanes) {
+ D0F0xE4_WRAP_8029.Value &= (~LaneBitMap);
+ }
+ D0F0xE4_WRAP_8029.Value &= ((1 << Wrapper->NumberOfLanes) - 1);
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8029_ADDRESS),
+ D0F0xE4_WRAP_8029.Value,
+ TRUE,
+ Pcie
+ );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Reduce link width
+ *
+ *
+ * @param[in] LinkWidth Link width
+ * @param[in] Engine Pointer to Engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieTopologyReduceLinkWidthV5 (
+ IN UINT8 LinkWidth,
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_WRAPPER_CONFIG *Wrapper;
+ UINT32 LinkReversed;
+ UINT8 DeltaLinkWidthBitmap;
+ UINT32 LanesToDisable;
+ Wrapper = PcieConfigGetParentWrapper (Engine);
+ LinkReversed = PcieUtilIsLinkReversed (TRUE, Engine, Pcie);
+
+ DeltaLinkWidthBitmap = (1 << (PcieConfigGetNumberOfCoreLane (Engine) - LinkWidth)) - 1;
+ LanesToDisable = (DeltaLinkWidthBitmap << ((LinkReversed == 1) ? Engine->Type.Port.StartCoreLane : (Engine->Type.Port.StartCoreLane + LinkWidth)));
+
+ PcieTopologyLaneControlV5 (
+ DisableLanes,
+ LanesToDisable,
+ Wrapper,
+ Pcie
+ );
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PcieWrapperServicesV5.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PcieWrapperServicesV5.c
new file mode 100644
index 0000000..89547bf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieInitLibV5/PcieWrapperServicesV5.c
@@ -0,0 +1,184 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe topology initialization service procedures.
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbPcieFamServices.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbPcieInitLibV5.h"
+#include "GnbRegistersCommonV2.h"
+#include "GnbSmuInitLibV7.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEINITLIBV5_PCIEWRAPPERSERVICESV5_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+UINT8 LaneMuxSelectorArrayV5[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
+
+
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if lane topology supports Gen3
+ *
+ * Check if more that one link mapped to single PIF slice
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ */
+
+BOOLEAN
+PcieTopologyIsGen3SupportedV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper
+ )
+{
+ UINT8 LaneNibbleArray [4];
+ UINT32 LaneBitmap;
+ UINT8 Nibble;
+ UINT8 NibbleBitmap;
+ PCIe_ENGINE_CONFIG *Engine;
+
+
+ LibAmdMemFill (&LaneNibbleArray[0], 0x00, sizeof (LaneNibbleArray), PcieConfigGetStdHeader (Wrapper));
+ Engine = PcieConfigGetChildEngine (Wrapper);
+ while (Engine != NULL) {
+ LaneBitmap = PcieUtilGetEngineLaneBitMap (LANE_TYPE_PCIE_PHY_NATIVE, 0, Engine);
+ for (Nibble = 0; Nibble < 4; Nibble++) {
+ NibbleBitmap = (0xF << (Nibble * 4));
+ if ((LaneBitmap & NibbleBitmap) != 0) {
+ if (++LaneNibbleArray [Nibble] > 1) {
+ return FALSE;
+ }
+ }
+ }
+ Engine = PcieLibGetNextDescriptor (Engine);
+ }
+ return TRUE;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Execute/clean up reconfiguration
+ *
+ *
+ * @param[in] Wrapper Pointer to wrapper config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ */
+VOID
+PcieTopologyExecuteReconfigV5 (
+ IN PCIe_WRAPPER_CONFIG *Wrapper,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ D0F0xE4_WRAP_8062_STRUCT D0F0xE4_WRAP_8062;
+ PCIe_SILICON_CONFIG *Silicon;
+ DEV_OBJECT DevObject;
+
+ if (PcieLibIsPcieWrapper (Wrapper)) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyExecuteReconfigV5 Enter\n");
+
+ D0F0xE4_WRAP_8062.Value = PcieRegisterRead (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
+ Pcie
+ );
+ D0F0xE4_WRAP_8062.Field.ReconfigureEn = 0x1;
+ D0F0xE4_WRAP_8062.Field.ResetPeriod = 0x2;
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
+ D0F0xE4_WRAP_8062.Value,
+ FALSE,
+ Pcie
+ );
+
+ Silicon = PcieConfigGetParentSilicon (Wrapper);
+ DevObject.StdHeader = GnbLibGetHeader (Pcie);
+ DevObject.GnbHandle = GnbGetHandle (GnbLibGetHeader (Pcie));
+ DevObject.DevPciAddress.AddressValue = Silicon->Address.AddressValue;
+ GnbSmuServiceRequestV7 (
+ &DevObject,
+ 25,
+ 0,
+ 0
+ );
+
+ D0F0xE4_WRAP_8062.Field.ConfigXferMode = 0x1;
+ D0F0xE4_WRAP_8062.Field.ReconfigureEn = 0x0;
+ PcieRegisterWrite (
+ Wrapper,
+ WRAP_SPACE (Wrapper->WrapId, D0F0xE4_WRAP_8062_ADDRESS),
+ D0F0xE4_WRAP_8062.Value,
+ FALSE,
+ Pcie
+ );
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTopologyExecuteReconfigV5 Exit\n");
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieMaxPayload/PcieMaxPayload.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieMaxPayload/PcieMaxPayload.c
new file mode 100644
index 0000000..edf8772
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieMaxPayload/PcieMaxPayload.c
@@ -0,0 +1,376 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Configure Max Payload
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision:
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "PcieMaxPayload.h"
+#include "OptionGnb.h"
+#include "GnbFamServices.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIEMAXPAYLOAD_PCIEMAXPAYLOAD_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+typedef struct {
+ GNB_PCI_SCAN_DATA ScanData;
+ UINT8 MaxPayload;
+} PCIE_MAX_PAYLOAD_DATA;
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+SCAN_STATUS
+PcieGetMaxPayloadCallback (
+ IN PCI_ADDR Device,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ );
+
+SCAN_STATUS
+PcieSetMaxPayloadCallback (
+ IN PCI_ADDR Device,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ );
+
+AGESA_STATUS
+PciePayloadBlackListFeature (
+ IN PCI_ADDR Device,
+ IN UINT8 *MaxPayload,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+PcieMaxPayloadInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Determine maximum payload size for PCIe segment
+ *
+ * Scan through all link in segment to determine maximum payload by EPs.
+ *
+ * @param[in] DownstreamPort PCI address of PCIe port
+ * @param[in] EngineMaxPayload MaxPayload supported by the engine
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+
+VOID
+PcieSetMaxPayload (
+ IN PCI_ADDR DownstreamPort,
+ IN UINT8 EngineMaxPayload,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCIE_MAX_PAYLOAD_DATA PcieMaxPayloadData;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, " PcieSetMaxPayload for Device = %d:%d:%d\n",
+ DownstreamPort.Address.Bus,
+ DownstreamPort.Address.Device,
+ DownstreamPort.Address.Function
+ );
+ PcieMaxPayloadData.MaxPayload = EngineMaxPayload;
+ PcieMaxPayloadData.ScanData.StdHeader = StdHeader;
+ PcieMaxPayloadData.ScanData.GnbScanCallback = PcieGetMaxPayloadCallback;
+ GnbLibPciScan (DownstreamPort, DownstreamPort, &PcieMaxPayloadData.ScanData);
+ PcieMaxPayloadData.ScanData.GnbScanCallback = PcieSetMaxPayloadCallback;
+ GnbLibPciScan (DownstreamPort, DownstreamPort, &PcieMaxPayloadData.ScanData);
+ IDS_HDT_CONSOLE (GNB_TRACE, " PcieSetMaxPayloadExit\n");
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Evaluate device Max Payload - save SMALLEST Max Payload for PCIe Segment
+ *
+ *
+ *
+ * @param[in] Device PCI Address
+ * @param[in,out] ScanData Scan configuration data
+ * @retval Scan Status of 0
+ */
+
+SCAN_STATUS
+PcieGetMaxPayloadCallback (
+ IN PCI_ADDR Device,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ )
+{
+ SCAN_STATUS ScanStatus;
+ PCIE_MAX_PAYLOAD_DATA *PcieMaxPayloadData;
+ PCIE_DEVICE_TYPE DeviceType;
+ UINT32 Value;
+ UINT8 PcieCapPtr;
+ UINT8 DeviceMaxPayload;
+
+ PcieMaxPayloadData = (PCIE_MAX_PAYLOAD_DATA*) ScanData;
+ ScanStatus = SCAN_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, " PcieGetMaxPayloadCallback for Device = %d:%d:%d\n",
+ Device.Address.Bus,
+ Device.Address.Device,
+ Device.Address.Function
+ );
+ PcieCapPtr = GnbLibFindPciCapability (Device.AddressValue, PCIE_CAP_ID, ScanData->StdHeader);
+ if (PcieCapPtr != 0) {
+ GnbLibPciRead (
+ Device.AddressValue | (PcieCapPtr + PCIE_DEVICE_CAP_REGISTER),
+ AccessWidth32,
+ &Value,
+ ScanData->StdHeader
+ );
+ DeviceMaxPayload = (UINT8) (Value & 0x7);
+ PciePayloadBlackListFeature (Device, &DeviceMaxPayload, ScanData->StdHeader);
+ IDS_HDT_CONSOLE (GNB_TRACE, " Found DeviceMaxPayload as %d (Value = %x\n", DeviceMaxPayload, Value);
+ if (DeviceMaxPayload < PcieMaxPayloadData->MaxPayload) {
+ PcieMaxPayloadData->MaxPayload = DeviceMaxPayload;
+ }
+ }
+ DeviceType = GnbLibGetPcieDeviceType (Device, ScanData->StdHeader);
+ switch (DeviceType) {
+ case PcieDeviceRootComplex:
+ case PcieDeviceDownstreamPort:
+ case PcieDeviceUpstreamPort:
+ GnbLibPciScanSecondaryBus (Device, &PcieMaxPayloadData->ScanData);
+ break;
+ case PcieDeviceEndPoint:
+ case PcieDeviceLegacyEndPoint:
+ break;
+ default:
+ break;
+ }
+ return SCAN_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Configure the Max Payload setting to all devices in the PCIe Segment
+ *
+ *
+ *
+ * @param[in] Device PCI Address
+ * @param[in,out] ScanData Scan configuration data
+ * @retval Scan Status of 0
+ */
+
+SCAN_STATUS
+PcieSetMaxPayloadCallback (
+ IN PCI_ADDR Device,
+ IN OUT GNB_PCI_SCAN_DATA *ScanData
+ )
+{
+ SCAN_STATUS ScanStatus;
+ PCIE_MAX_PAYLOAD_DATA *PcieMaxPayloadData;
+ PCIE_DEVICE_TYPE DeviceType;
+ UINT8 PcieCapPtr;
+
+ PcieMaxPayloadData = (PCIE_MAX_PAYLOAD_DATA*) ScanData;
+ ScanStatus = SCAN_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, " PcieSetMaxPayloadCallback for Device = %d:%d:%d to %d\n",
+ Device.Address.Bus,
+ Device.Address.Device,
+ Device.Address.Function,
+ PcieMaxPayloadData->MaxPayload
+ );
+ PcieCapPtr = GnbLibFindPciCapability (Device.AddressValue, PCIE_CAP_ID, ScanData->StdHeader);
+ if (PcieCapPtr != 0) {
+ GnbLibPciRMW (
+ Device.AddressValue | (PcieCapPtr + PCIE_DEVICE_CTRL_REGISTER),
+ AccessWidth32,
+ ~(UINT32) (0x7 << 5),
+ ((UINT32)PcieMaxPayloadData->MaxPayload << 5),
+ ScanData->StdHeader
+ );
+ }
+ DeviceType = GnbLibGetPcieDeviceType (Device, ScanData->StdHeader);
+ switch (DeviceType) {
+ case PcieDeviceRootComplex:
+ case PcieDeviceDownstreamPort:
+ case PcieDeviceUpstreamPort:
+ GnbLibPciScanSecondaryBus (Device, &PcieMaxPayloadData->ScanData);
+ break;
+ case PcieDeviceEndPoint:
+ case PcieDeviceLegacyEndPoint:
+ break;
+ default:
+ break;
+ }
+ return SCAN_SUCCESS;
+}
+
+UINT16 PayloadBlacklistDeviceTable[] = {
+ 0x1969, 0x1083, (UINT16) MAX_PAYLOAD_128
+};
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Pcie Max_Payload_Size Black List
+ *
+ *
+ *
+ * @param[in] Device PCI_ADDR of PCIe Device to evaluate
+ * @param[in] MaxPayload Pointer to Max_Payload_Size value
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+PciePayloadBlackListFeature (
+ IN PCI_ADDR Device,
+ IN UINT8 *MaxPayload,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 TargetDeviceId;
+ UINTN i;
+ UINT32 DeviceId;
+ UINT32 VendorId;
+
+ GnbLibPciRead (Device.AddressValue, AccessWidth32, &TargetDeviceId, StdHeader);
+ for (i = 0; i < (sizeof (PayloadBlacklistDeviceTable) / sizeof (UINT16)); i = i + 3) {
+ VendorId = PayloadBlacklistDeviceTable[i];
+ DeviceId = PayloadBlacklistDeviceTable[i + 1];
+ if (VendorId == (UINT16)TargetDeviceId) {
+ if (DeviceId == 0xFFFF || DeviceId == (TargetDeviceId >> 16)) {
+ *MaxPayload = (UINT8) PayloadBlacklistDeviceTable[i + 2];
+ }
+ }
+ }
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Callback to init various features on all active ports
+ *
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Not used
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PcieMaxPayloadInitCallback (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIE_MAXPAYLOAD_SERVICE *PcieMaxPayloadProtocol;
+ UINT8 EngineMaxPayload;
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_CONFIG *Complex;
+
+
+
+ if ((GnbBuildOptions.CfgMaxPayloadEnable != 0) &&
+ (!PcieConfigIsSbPcieEngine (Engine)) &&
+ (PcieConfigCheckPortStatus (Engine, INIT_STATUS_PCIE_TRAINING_SUCCESS))) {
+ EngineMaxPayload = MAX_PAYLOAD;
+ Complex = (PCIe_COMPLEX_CONFIG *) PcieConfigGetParent (DESCRIPTOR_COMPLEX, &Engine->Header);
+ Status = GnbLibLocateService (GnbPcieMaxPayloadService, Complex->SocketId, (VOID **)&PcieMaxPayloadProtocol, GnbLibGetHeader (Pcie));
+ if (Status == AGESA_SUCCESS) {
+ EngineMaxPayload = PcieMaxPayloadProtocol->SetMaxPayload (Engine);
+ }
+ PcieSetMaxPayload (Engine->Type.Port.Address, EngineMaxPayload, GnbLibGetHeader (Pcie));
+ }
+}
+
+/**----------------------------------------------------------------------------------------*/
+/**
+ * Interface to configure MaxPayloadSize on PCIE interface
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ *
+ * @retval AGESA_STATUS
+ */
+ /*----------------------------------------------------------------------------------------*/
+AGESA_STATUS
+PcieMaxPayloadInterface (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS AgesaStatus;
+ PCIe_PLATFORM_CONFIG *Pcie;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMaxPayloadInterface Enter\n");
+ AgesaStatus = PcieLocateConfigurationData (StdHeader, &Pcie);
+ if (AgesaStatus == AGESA_SUCCESS) {
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_PCIE_ENGINE,
+ PcieMaxPayloadInitCallback,
+ NULL,
+ Pcie
+ );
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieMaxPayloadInterface Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieMaxPayload/PcieMaxPayload.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieMaxPayload/PcieMaxPayload.h
new file mode 100644
index 0000000..d367244
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieMaxPayload/PcieMaxPayload.h
@@ -0,0 +1,55 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Configure Max Payload
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIEMAXPAYLOAD_H_
+#define _PCIEMAXPAYLOAD_H_
+
+VOID
+PcieSetMaxPayload (
+ IN PCI_ADDR DownstreamPort,
+ IN UINT8 EngineMaxPayload,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/GnbPcieTrainingV2.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/GnbPcieTrainingV2.h
new file mode 100644
index 0000000..490d5eb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/GnbPcieTrainingV2.h
@@ -0,0 +1,51 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe training library
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBPCIETRAININGV2_H_
+#define _GNBPCIETRAININGV2_H_
+
+#include "PcieTrainingV2.h"
+#include "PcieWorkaroundsV2.h"
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/PcieTrainingV2.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/PcieTrainingV2.c
new file mode 100644
index 0000000..36044ac
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/PcieTrainingV2.c
@@ -0,0 +1,801 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe link training
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85361 $ @e \$Date: 2013-01-07 11:15:28 -0600 (Mon, 07 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbPcieInitLibV5.h"
+#include "GnbPcieTrainingV2.h"
+#include "GnbRegistersCommonV2.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIETRAININGV2_PCIETRAININGV2_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set link State
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] State State to set
+ * @param[in] UpdateTimeStamp Update time stamp
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+PcieTrainingSetPortState (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIE_LINK_TRAINING_STATE State,
+ IN BOOLEAN UpdateTimeStamp,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 TimeStamp;
+ CurrentEngine->Type.Port.State = (UINT8) State;
+ if (UpdateTimeStamp) {
+ TimeStamp = PcieTimerGetTimeStamp (Pcie);
+ CurrentEngine->Type.Port.TimeStamp = TimeStamp;
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Set state for all engines connected to same reset ID
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Pointer to Reset Id
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+STATIC VOID
+PcieSetResetStateOnEngines (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 ResetId;
+ ResetId = *(UINT8 *)Buffer;
+ if (Engine->Type.Port.PortData.ResetId == ResetId && !PcieConfigIsSbPcieEngine (Engine)) {
+ PcieTrainingSetPortState (Engine, LinkStateResetDuration, TRUE, Pcie);
+ GnbLibPciRMW (
+ Engine->Type.Port.Address.AddressValue | DxFxx68_ADDRESS,
+ AccessWidth32,
+ (UINT32) ~DxFxx68_LinkDis_MASK,
+ 1 << DxFxx68_LinkDis_OFFSET,
+ GnbLibGetHeader (Pcie)
+ );
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Assert GPIO port reset.
+ *
+ * Transition to LinkStateResetDuration state
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+PcieTrainingAssertReset (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_SLOT_RESET_INFO ResetInfo;
+ ResetInfo.ResetControl = AssertSlotReset;
+ ResetInfo.ResetId = CurrentEngine->Type.Port.PortData.ResetId;
+ LibAmdMemCopy (&ResetInfo.StdHeader, GnbLibGetHeader (Pcie), sizeof (AMD_CONFIG_PARAMS), GnbLibGetHeader (Pcie));
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_PCIE_ENGINE,
+ PcieSetResetStateOnEngines,
+ (VOID *)&CurrentEngine->Type.Port.PortData.ResetId,
+ Pcie
+ );
+ AgesaPcieSlotResetControl (0, &ResetInfo);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check for reset duration
+ *
+ * Transition to LinkStateResetDuration state
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+STATIC VOID
+PcieTrainingCheckResetDuration (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 TimeStamp;
+ TimeStamp = PcieTimerGetTimeStamp (Pcie);
+ if (TIMESTAMPS_DELTA (TimeStamp, CurrentEngine->Type.Port.TimeStamp) >= Pcie->LinkGpioResetAssertionTime) {
+ PcieTrainingSetPortState (CurrentEngine, LinkStateResetExit, FALSE, Pcie);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Deassert GPIO port reset.
+ *
+ * Transition to LinkStateResetDuration state
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Platform configuration
+ *
+ */
+STATIC VOID
+PcieTrainingDeassertReset (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PCIe_SLOT_RESET_INFO ResetInfo;
+ ResetInfo.ResetControl = DeassertSlotReset;
+ ResetInfo.ResetId = CurrentEngine->Type.Port.PortData.ResetId;
+ LibAmdMemCopy (&ResetInfo.StdHeader, GnbLibGetHeader (Pcie), sizeof (AMD_CONFIG_PARAMS), GnbLibGetHeader (Pcie));
+ AgesaPcieSlotResetControl (0, &ResetInfo);
+ GnbLibPciRMW (
+ CurrentEngine->Type.Port.Address.AddressValue | DxFxx68_ADDRESS,
+ AccessWidth32,
+ (UINT32) ~DxFxx68_LinkDis_MASK,
+ 0 << DxFxx68_LinkDis_OFFSET,
+ GnbLibGetHeader (Pcie)
+ );
+ PcieTrainingSetPortState (CurrentEngine, LinkTrainingResetTimeout, TRUE, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check for after reset deassertion timeout
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+PcieTrainingCheckResetTimeout (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 TimeStamp;
+ TimeStamp = PcieTimerGetTimeStamp (Pcie);
+ if (TIMESTAMPS_DELTA (TimeStamp, CurrentEngine->Type.Port.TimeStamp) >= Pcie->LinkResetToTrainingTime) {
+ PcieTrainingSetPortState (CurrentEngine, LinkStateReleaseTraining, FALSE, Pcie);
+ }
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Release training
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+PcieTrainingRelease (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 LinkTrainingState;
+ PcieRegisterWriteField (
+ PcieConfigGetParentWrapper (CurrentEngine),
+ WRAP_SPACE (PcieConfigGetParentWrapper (CurrentEngine)->WrapId, D0F0xE4_WRAP_0800_ADDRESS + 0x100 * CurrentEngine->Type.Port.PortId),
+ D0F0xE4_WRAP_0800_HoldTraining_OFFSET,
+ D0F0xE4_WRAP_0800_HoldTraining_WIDTH,
+ 0,
+ FALSE,
+ Pcie
+ );
+ if (CurrentEngine->Type.Port.PortData.MiscControls.LinkComplianceMode == 0x1) {
+ LinkTrainingState = LinkStateCompliance;
+ } else {
+ LinkTrainingState = LinkStateDetectPresence;
+ }
+ PcieTrainingSetPortState (CurrentEngine, LinkTrainingState, TRUE, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Detect presence of any EP on the link
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PcieTrainingDetectPresence (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 LinkHwStateHistory[4];
+ UINT32 TimeStamp;
+ PcieUtilGetLinkHwStateHistory (CurrentEngine, &LinkHwStateHistory[0], 4, Pcie);
+ if (LinkHwStateHistory[0] > 4) {
+ PcieTrainingSetPortState (CurrentEngine, LinkStateDetecting, TRUE, Pcie);
+ return;
+ }
+ TimeStamp = PcieTimerGetTimeStamp (Pcie);
+ if (TIMESTAMPS_DELTA (TimeStamp, CurrentEngine->Type.Port.TimeStamp) >= Pcie->LinkReceiverDetectionPooling) {
+ PcieTrainingSetPortState (CurrentEngine, LinkStateDeviceNotPresent, FALSE, Pcie);
+ }
+}
+
+UINT8 FailPattern1 [] = {0x2a, 0x6};
+UINT8 FailPattern2 [] = {0x2a, 0x9};
+UINT8 FailPattern3 [] = {0x2a, 0xb};
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Detect Link State
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PcieTrainingDetectLinkState (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 LinkHwStateHistory[16];
+ UINT32 TimeStamp;
+ UINT8 LinkTrainingState;
+ PcieUtilGetLinkHwStateHistory (CurrentEngine, &LinkHwStateHistory[0], 4, Pcie);
+ if (LinkHwStateHistory[0] == 0x10) {
+ PcieTrainingSetPortState (CurrentEngine, LinkStateL0, FALSE, Pcie);
+ return;
+ };
+ TimeStamp = PcieTimerGetTimeStamp (Pcie);
+ if (TIMESTAMPS_DELTA (TimeStamp, CurrentEngine->Type.Port.TimeStamp) >= Pcie->LinkL0Pooling) {
+ LinkTrainingState = LinkStateTrainingFail;
+ PcieUtilGetLinkHwStateHistory (CurrentEngine, &LinkHwStateHistory[0], 16, Pcie);
+ if (LinkHwStateHistory[0] == 0x7) {
+ LinkTrainingState = LinkStateCompliance;
+ } else if (PcieUtilSearchArray (LinkHwStateHistory, sizeof (LinkHwStateHistory), FailPattern1, sizeof (FailPattern1))) {
+ LinkTrainingState = LinkStateBrokenLane;
+ } else if (PcieUtilSearchArray (LinkHwStateHistory, sizeof (LinkHwStateHistory), FailPattern2, sizeof (FailPattern2))) {
+ LinkTrainingState = LinkStateGen2Fail;
+ } else if (PcieUtilSearchArray (LinkHwStateHistory, sizeof (LinkHwStateHistory), FailPattern3, sizeof (FailPattern3))) {
+ LinkTrainingState = LinkStateGen2Fail;
+ }
+ PcieTrainingSetPortState (CurrentEngine, LinkTrainingState, FALSE, Pcie);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Broken Lane
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+STATIC VOID
+PcieTrainingBrokenLineV2 (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 CurrentLinkWidth;
+ UINT8 LinkTrainingState;
+ CurrentLinkWidth = PcieUtilGetLinkWidth (CurrentEngine, Pcie);
+ if (CurrentLinkWidth < PcieConfigGetNumberOfPhyLane (CurrentEngine) && CurrentLinkWidth > 0) {
+ CurrentEngine->InitStatus |= INIT_STATUS_PCIE_PORT_BROKEN_LANE_RECOVERY;
+ PcieTopologyReduceLinkWidthV5 (CurrentLinkWidth, CurrentEngine, Pcie);
+ LinkTrainingState = LinkStateResetAssert;
+ PutEventLog (
+ AGESA_WARNING,
+ GNB_EVENT_BROKEN_LANE_RECOVERY,
+ CurrentEngine->Type.Port.Address.AddressValue,
+ 0,
+ 0,
+ 0,
+ GnbLibGetHeader (Pcie)
+ );
+ } else {
+ LinkTrainingState = LinkStateGen2Fail;
+ }
+ PcieTrainingSetPortState (CurrentEngine, LinkTrainingState, FALSE, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if link fail because device does not support Gen2
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+STATIC VOID
+PcieTrainingGen2Fail (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT8 LinkTrainingState;
+ if (CurrentEngine->Type.Port.PortData.MiscControls.LinkSafeMode != PcieGen1) {
+ PcieConfigUpdatePortStatus (CurrentEngine, INIT_STATUS_PCIE_PORT_GEN2_RECOVERY, 0);
+ CurrentEngine->Type.Port.PortData.MiscControls.LinkSafeMode = PcieGen1;
+ PcieLinkSafeMode (CurrentEngine, Pcie);
+ LinkTrainingState = LinkStateResetAssert;
+ PutEventLog (
+ AGESA_WARNING,
+ GNB_EVENT_BROKEN_LANE_RECOVERY,
+ CurrentEngine->Type.Port.Address.AddressValue,
+ 0,
+ 0,
+ 0,
+ GnbLibGetHeader (Pcie)
+ );
+ } else {
+ LinkTrainingState = LinkStateTrainingFail;
+ }
+ PcieTrainingSetPortState (CurrentEngine, LinkTrainingState, FALSE, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Link in L0
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+PcieCheckLinkL0 (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PcieTrainingSetPortState (CurrentEngine, LinkStateVcoNegotiation, TRUE, Pcie);
+}
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if link fail because device does not support Gen X
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+PcieTrainingCheckVcoNegotiation (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 TimeStamp;
+ DxFxx128_STRUCT DxFxx128;
+ TimeStamp = PcieTimerGetTimeStamp (Pcie);
+ GnbLibPciRead (CurrentEngine->Type.Port.Address.AddressValue | DxFxx128_ADDRESS, AccessWidth32, &DxFxx128, GnbLibGetHeader (Pcie));
+ if (DxFxx128.Field.VcNegotiationPending == 0) {
+ UINT16 NumberOfPhyLane;
+ NumberOfPhyLane = PcieConfigGetNumberOfPhyLane (CurrentEngine);
+ if (Pcie->GfxCardWorkaround == GfxWorkaroundEnable && NumberOfPhyLane >= 8) {
+ // Limit exposure of workaround to x8 and x16 port.
+ PcieTrainingSetPortState (CurrentEngine, LinkStateGfxWorkaround, TRUE, Pcie);
+ } else {
+ PcieTrainingSetPortState (CurrentEngine, LinkStateTrainingSuccess, FALSE, Pcie);
+ }
+ return;
+ }
+ if (TIMESTAMPS_DELTA (TimeStamp, CurrentEngine->Type.Port.TimeStamp) >= 1000 * 1000) {
+ PcieTrainingSetPortState (CurrentEngine, LinkStateRetrain, FALSE, Pcie);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Check if for GFX workaround condition
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+PcieTrainingGfxWorkaround (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ UINT32 TimeStamp;
+ GFX_WORKAROUND_STATUS GfxWorkaroundStatus;
+ TimeStamp = PcieTimerGetTimeStamp (Pcie);
+
+ GfxWorkaroundStatus = PcieGfxCardWorkaroundV2 (CurrentEngine->Type.Port.Address, GnbLibGetHeader (Pcie));
+ switch (GfxWorkaroundStatus) {
+ case GFX_WORKAROUND_DEVICE_NOT_READY:
+ if (TIMESTAMPS_DELTA (TimeStamp, CurrentEngine->Type.Port.TimeStamp) >= (3 * 1000000)) {
+ PcieTrainingSetPortState (CurrentEngine, LinkStateTrainingFail, TRUE, Pcie);
+ }
+ break;
+ case GFX_WORKAROUND_SUCCESS:
+ PcieTrainingSetPortState (CurrentEngine, LinkStateTrainingSuccess, FALSE, Pcie);
+ break;
+ case GFX_WORKAROUND_RESET_DEVICE:
+ if (CurrentEngine->Type.Port.GfxWrkRetryCount < 5) {
+ CurrentEngine->Type.Port.GfxWrkRetryCount++;
+ PcieTrainingSetPortState (CurrentEngine, LinkStateResetAssert, TRUE, Pcie);
+ } else {
+ PcieTrainingSetPortState (CurrentEngine, LinkStateTrainingFail, TRUE, Pcie);
+ }
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Retrain link
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+PcieTrainingRetrainLink (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ GnbLibPciRMW (
+ CurrentEngine->Type.Port.Address.AddressValue | DxFxx68_ADDRESS,
+ AccessWidth32,
+ (UINT32) ~DxFxx68_RetrainLink_MASK,
+ 1 << DxFxx68_RetrainLink_OFFSET,
+ GnbLibGetHeader (Pcie)
+ );
+ PcieTrainingSetPortState (CurrentEngine, LinkStateDetecting, TRUE, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Training fail on this port
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+PcieTrainingFail (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PcieConfigUpdatePortStatus (CurrentEngine, INIT_STATUS_PCIE_PORT_TRAINING_FAIL, 0);
+ PcieTrainingSetPortState (CurrentEngine, LinkStateDeviceNotPresent, FALSE, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Links training success
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PcieTrainingSuccess (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PcieConfigUpdatePortStatus (CurrentEngine, INIT_STATUS_PCIE_TRAINING_SUCCESS, 0);
+ PcieTrainingSetPortState (CurrentEngine, LinkStateTrainingCompleted, FALSE, Pcie);
+ GnbLibPciRMW (
+ CurrentEngine->Type.Port.Address.AddressValue | DxFxx68_ADDRESS,
+ AccessWidth32,
+ (UINT32) ~DxFxx68_LinkBWManagementStatus_MASK,
+ 1 << DxFxx68_LinkBWManagementStatus_OFFSET,
+ GnbLibGetHeader (Pcie)
+ );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Links in compliance
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+PcieTrainingCompliance (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ PcieConfigUpdatePortStatus (CurrentEngine, INIT_STATUS_PCIE_PORT_IN_COMPLIANCE, 0);
+ PcieTrainingSetPortState (CurrentEngine, LinkStateTrainingCompleted, FALSE, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * PCie EP not present
+ *
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+PcieTrainingNotPresent (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ if ((CurrentEngine->Type.Port.PortData.LinkHotplug == HotplugEnhanced) || (CurrentEngine->Type.Port.PortData.LinkHotplug == HotplugServer)) {
+ } else {
+ PcieRegisterWriteField (
+ PcieConfigGetParentWrapper (CurrentEngine),
+ WRAP_SPACE (PcieConfigGetParentWrapper (CurrentEngine)->WrapId, D0F0xE4_WRAP_0800_ADDRESS + 0x100 * CurrentEngine->Type.Port.PortId),
+ D0F0xE4_WRAP_0800_HoldTraining_OFFSET,
+ D0F0xE4_WRAP_0800_HoldTraining_WIDTH,
+ 1,
+ FALSE,
+ Pcie
+ );
+ }
+ PcieTrainingSetPortState (CurrentEngine, LinkStateTrainingCompleted, FALSE, Pcie);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Final state. Port training completed.
+ *
+ * Initialization status recorded in PCIe_ENGINE_CONFIG.InitStatus
+ *
+ * @param[in] CurrentEngine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+VOID
+STATIC
+PcieTrainingCompleted (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Training state handling
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in, out] Buffer Indicate if engine in non final state
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+VOID
+STATIC
+PcieTrainingPortCallback (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN OUT VOID *Buffer,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ BOOLEAN *TrainingComplete;
+ TrainingComplete = (BOOLEAN *) Buffer;
+ if (Engine->Type.Port.State < Pcie->TrainingExitState) {
+ *TrainingComplete = FALSE;
+ } else {
+ return;
+ }
+ switch (Engine->Type.Port.State) {
+ case LinkStateResetAssert:
+ PcieTrainingAssertReset (Engine, Pcie);
+ break;
+ case LinkStateResetDuration:
+ PcieTrainingCheckResetDuration (Engine, Pcie);
+ break;
+ case LinkStateResetExit:
+ PcieTrainingDeassertReset (Engine, Pcie);
+ break;
+ case LinkTrainingResetTimeout:
+ PcieTrainingCheckResetTimeout (Engine, Pcie);
+ break;
+ case LinkStateReleaseTraining:
+ PcieTrainingRelease (Engine, Pcie);
+ break;
+ case LinkStateDetectPresence:
+ PcieTrainingDetectPresence (Engine, Pcie);
+ break;
+ case LinkStateDetecting:
+ PcieTrainingDetectLinkState (Engine, Pcie);
+ break;
+ case LinkStateBrokenLane:
+ PcieTrainingBrokenLineV2 (Engine, Pcie);
+ break;
+ case LinkStateGen2Fail:
+ PcieTrainingGen2Fail (Engine, Pcie);
+ break;
+ case LinkStateL0:
+ PcieCheckLinkL0 (Engine, Pcie);
+ break;
+ case LinkStateVcoNegotiation:
+ PcieTrainingCheckVcoNegotiation (Engine, Pcie);
+ break;
+ case LinkStateRetrain:
+ PcieTrainingRetrainLink (Engine, Pcie);
+ break;
+ case LinkStateTrainingFail:
+ PcieTrainingFail (Engine, Pcie);
+ break;
+ case LinkStateGfxWorkaround:
+ PcieTrainingGfxWorkaround (Engine, Pcie);
+ break;
+ case LinkStateTrainingSuccess:
+ PcieTrainingSuccess (Engine, Pcie);
+ break;
+ case LinkStateCompliance:
+ PcieTrainingCompliance (Engine, Pcie);
+ break;
+ case LinkStateDeviceNotPresent:
+ PcieTrainingNotPresent (Engine, Pcie);
+ break;
+ case LinkStateTrainingCompleted:
+ PcieTrainingCompleted (Engine, Pcie);
+ break;
+ default:
+ break;
+ }
+
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Main link training procedure
+ *
+ * Port end up in three possible state LinkStateTrainingNotPresent/LinkStateCompliance/
+ * LinkStateTrainingSuccess
+ *
+ * @param[in] Pcie Pointer to global PCIe configuration
+ * @retval AGESA_STATUS
+ *
+ */
+
+AGESA_STATUS
+PcieTraining (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS Status;
+ BOOLEAN TrainingComplete;
+
+ IDS_PERF_TIMESTAMP (TP_BEGINGNBPCIETRAINING, GnbLibGetHeader (Pcie));
+ Status = AGESA_SUCCESS;
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTraining Enter\n");
+ do {
+ TrainingComplete = TRUE;
+ PcieConfigRunProcForAllEngines (
+ DESCRIPTOR_ALLOCATED | DESCRIPTOR_PCIE_ENGINE,
+ PcieTrainingPortCallback,
+ &TrainingComplete,
+ Pcie
+ );
+ } while (!TrainingComplete);
+ IDS_HDT_CONSOLE (GNB_TRACE, "PcieTraining Exit [%x]\n", Status);
+ IDS_PERF_TIMESTAMP (TP_ENDGNBPCIETRAINING, GnbLibGetHeader (Pcie));
+ return Status;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/PcieTrainingV2.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/PcieTrainingV2.h
new file mode 100644
index 0000000..c31f73a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/PcieTrainingV2.h
@@ -0,0 +1,63 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * PCIe link training
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIETRAINING_H_
+#define _PCIETRAINING_H_
+
+
+AGESA_STATUS
+PcieTraining (
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+VOID
+PcieTrainingSetPortState (
+ IN PCIe_ENGINE_CONFIG *CurrentEngine,
+ IN PCIE_LINK_TRAINING_STATE State,
+ IN BOOLEAN UpdateTimeStamp,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+#endif
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/PcieWorkaroundsV2.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/PcieWorkaroundsV2.c
new file mode 100644
index 0000000..159ea3e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/PcieWorkaroundsV2.c
@@ -0,0 +1,375 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Various workarounds
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85947 $ @e \$Date: 2013-01-14 17:25:21 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbPcieTrainingV2.h"
+#include "GnbRegistersCommonV2.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBPCIETRAININGV2_PCIEWORKAROUNDSV2_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+PcieConfigureBridgeResources (
+ IN PCI_ADDR Port,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+PcieFreeBridgeResources (
+ IN PCI_ADDR Port,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+GFX_WORKAROUND_STATUS
+PcieDeskewWorkaround (
+ IN PCI_ADDR Device,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+GFX_WORKAROUND_STATUS
+PcieNvWorkaround (
+ IN PCI_ADDR Device,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+PcieProgramCpuMmio (
+ OUT UINT32 *SaveValues,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+PcieRestoreCpuMmio (
+ IN UINT32 *RestoreValues,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+BOOLEAN
+PcieIsDeskewCardDetected (
+ IN UINT16 DeviceId
+ );
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *
+ *
+ * @param[in] Port PCI address of the port
+ * @param[in] StdHeader Standard configuration header
+ * @retval GFX_WORKAROUND_STATUS Return the GFX Card Workaround status
+ */
+GFX_WORKAROUND_STATUS
+PcieGfxCardWorkaroundV2 (
+ IN PCI_ADDR Port,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ GFX_WORKAROUND_STATUS Status;
+ UINT16 DeviceId;
+ UINT16 VendorId;
+ UINT8 DevClassCode;
+ UINT32 SaveValueData[2];
+ PCI_ADDR Ep;
+
+ Status = GFX_WORKAROUND_SUCCESS;
+
+ Ep.AddressValue = MAKE_SBDFO (0, Port.Address.Bus + Port.Address.Device, 0, 0, 0);
+ if (PcieConfigureBridgeResources (Port, StdHeader) == AGESA_SUCCESS) {
+ GnbLibPciRead (Ep.AddressValue | 0x00, AccessWidth16, &DeviceId, StdHeader);
+ Status = GFX_WORKAROUND_DEVICE_NOT_READY;
+ if (DeviceId != 0xffff) {
+ GnbLibPciRead (Ep.AddressValue | 0x02, AccessWidth16, &VendorId, StdHeader);
+ if (VendorId != 0xffff) {
+ GnbLibPciRead (Ep.AddressValue | 0x0B, AccessWidth8, &DevClassCode, StdHeader);
+ Status = GFX_WORKAROUND_SUCCESS;
+ if (DevClassCode == 3) {
+ PcieProgramCpuMmio (SaveValueData, StdHeader);
+ if (VendorId == 0x1002 && PcieIsDeskewCardDetected (DeviceId)) {
+ Status = PcieDeskewWorkaround (Ep, StdHeader);
+ } else if (VendorId == 0x10DE) {
+ Status = PcieNvWorkaround (Ep, StdHeader);
+ }
+ PcieRestoreCpuMmio (SaveValueData, StdHeader);
+ }
+ }
+ }
+ PcieFreeBridgeResources (Port, StdHeader);
+ }
+ return Status;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * RV370/RV380 Deskew workaround
+ *
+ *
+ *
+ * @param[in] Device Pcie Address
+ * @param[in] StdHeader Standard configuration header
+ */
+GFX_WORKAROUND_STATUS
+PcieDeskewWorkaround (
+ IN PCI_ADDR Device,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINTN MmioBase;
+ UINT16 MmioData1;
+ UINT32 MmioData2;
+
+ MmioBase = UserOptions.CfgTempPcieMmioBaseAddress;
+ if (MmioBase == 0) {
+ return GFX_WORKAROUND_SUCCESS;
+ }
+ GnbLibPciWrite (Device.AddressValue | 0x18, AccessWidth32, &MmioBase, StdHeader);
+ GnbLibPciRMW (Device.AddressValue | 0x04, AccessWidth8 , (UINT32)~BIT1, BIT1, StdHeader);
+ GnbLibMemRMW (MmioBase + 0x120, AccessWidth16, 0, 0xb700, StdHeader);
+ GnbLibMemRead (MmioBase + 0x120, AccessWidth16, &MmioData1, StdHeader);
+ if (MmioData1 == 0xb700) {
+ GnbLibMemRMW (MmioBase + 0x124, AccessWidth32, 0, 0x13, StdHeader);
+ GnbLibMemRead (MmioBase + 0x124, AccessWidth32, &MmioData2, StdHeader);
+ if (MmioData2 == 0x13) {
+ GnbLibMemRead (MmioBase + 0x12C, AccessWidth32, &MmioData2, StdHeader);
+ if (MmioData2 & BIT8) {
+ return GFX_WORKAROUND_RESET_DEVICE;
+ }
+ }
+ }
+ GnbLibPciRMW (Device.AddressValue | 0x04, AccessWidth8, (UINT32)~BIT1, 0x0, StdHeader);
+ GnbLibPciRMW (Device.AddressValue | 0x18, AccessWidth32, 0x0, 0x0, StdHeader);
+
+ return GFX_WORKAROUND_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * NV43 card workaround (lost SSID)
+ *
+ *
+ *
+ * @param[in] Device Pcie Address of NV43 card.
+ * @param[in] StdHeader Standard configuration header
+ */
+GFX_WORKAROUND_STATUS
+PcieNvWorkaround (
+ IN PCI_ADDR Device,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 DeviceSSID;
+ UINTN MmioBase;
+ UINT32 MmioData3;
+
+ MmioBase = UserOptions.CfgTempPcieMmioBaseAddress;
+ if (MmioBase == 0) {
+ return GFX_WORKAROUND_SUCCESS;
+ }
+ GnbLibPciRMW (Device.AddressValue | 0x30, AccessWidth32, 0x0, ((UINT32)MmioBase) | 1, StdHeader);
+ GnbLibPciRMW (Device.AddressValue | 0x4, AccessWidth8, 0x0, 0x2, StdHeader);
+ GnbLibPciRead (Device.AddressValue | 0x2c, AccessWidth32, &DeviceSSID, StdHeader);
+ GnbLibMemRead (MmioBase + 0x54, AccessWidth32, &MmioData3, StdHeader);
+ if (DeviceSSID != MmioData3) {
+ GnbLibPciRMW (Device.AddressValue | 0x40, AccessWidth32, 0x0, MmioData3, StdHeader);
+ }
+ GnbLibPciRMW (Device.AddressValue | 0x30, AccessWidth32, 0x0, 0x0, StdHeader);
+ GnbLibPciRMW (Device.AddressValue | 0x4, AccessWidth8, 0x0, 0x0, StdHeader);
+ return GFX_WORKAROUND_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Allocate temporary resources for Pcie P2P bridge
+ *
+ *
+ *
+ * @param[in] Port Pci Address of Port to initialize.
+ * @param[in] StdHeader Standard configuration header
+ */
+AGESA_STATUS
+PcieConfigureBridgeResources (
+ IN PCI_ADDR Port,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Value;
+ UINT32 MmioBase;
+
+ MmioBase = UserOptions.CfgTempPcieMmioBaseAddress;
+ if (MmioBase == 0) {
+ return AGESA_WARNING;
+ }
+ Value = Port.Address.Bus + ((Port.Address.Bus + Port.Address.Device) << 8) + ((Port.Address.Bus + Port.Address.Device) << 16);
+ GnbLibPciWrite (Port.AddressValue | DxFxx18_ADDRESS, AccessWidth32, &Value, StdHeader);
+ Value = MmioBase + (MmioBase >> 16);
+ GnbLibPciWrite (Port.AddressValue | DxFxx20_ADDRESS, AccessWidth32, &Value, StdHeader);
+ Value = 0x000fff0;
+ GnbLibPciWrite (Port.AddressValue | DxFxx24_ADDRESS, AccessWidth32, &Value, StdHeader);
+ Value = 0x2;
+ GnbLibPciWrite (Port.AddressValue | D0F0x04_ADDRESS, AccessWidth8, &Value, StdHeader);
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Free temporary resources for Pcie P2P bridge
+ *
+ *
+ *
+ * @param[in] Port Pci Address of Port to clear resource allocation.
+ * @param[in] StdHeader Standard configuration header
+ */
+VOID
+PcieFreeBridgeResources (
+ IN PCI_ADDR Port,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Value;
+
+ Value = 0;
+ GnbLibPciWrite (Port.AddressValue | D0F0x04_ADDRESS, AccessWidth8, &Value, StdHeader);
+ GnbLibPciWrite (Port.AddressValue | DxFxx18_ADDRESS, AccessWidth32, &Value, StdHeader);
+ GnbLibPciWrite (Port.AddressValue | DxFxx20_ADDRESS, AccessWidth32, &Value, StdHeader);
+ GnbLibPciWrite (Port.AddressValue | DxFxx24_ADDRESS, AccessWidth32, &Value, StdHeader);
+
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Save CPU MMIO register
+ *
+ *
+ *
+ * @param[out] UINT32 SaveValues
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+PcieProgramCpuMmio (
+ OUT UINT32 *SaveValues,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ //Save CPU MMIO Register
+ GnbLibPciRead (MAKE_SBDFO (0, 0, 0x18, 0x1, 0xB8), AccessWidth32, SaveValues, StdHeader);
+ GnbLibPciRead (MAKE_SBDFO (0, 0, 0x18, 0x1, 0xBC), AccessWidth32, SaveValues + 1, StdHeader);
+
+ //Write Temp Pcie MMIO to CPU
+ GnbLibPciRMW (MAKE_SBDFO (0, 0, 0x18, 0x1, 0xBC), AccessWidth32, 0, (UserOptions.CfgTempPcieMmioBaseAddress >> 16) << 8, StdHeader);
+ GnbLibPciRMW (MAKE_SBDFO (0, 0, 0x18, 0x1, 0xB8), AccessWidth32, 0, ((UserOptions.CfgTempPcieMmioBaseAddress >> 16) << 8) | 0x3, StdHeader);
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Restore CPU MMIO register
+ *
+ *
+ *
+ * @param[in] PCIe_PLATFORM_CONFIG Pcie
+ * @param[in] StdHeader Standard configuration header
+ */
+VOID
+PcieRestoreCpuMmio (
+ IN UINT32 *RestoreValues,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ //Restore CPU MMIO Register
+ GnbLibPciRMW (MAKE_SBDFO (0, 0, 0x18, 0x1, 0xB8), AccessWidth32, 0, *RestoreValues, StdHeader);
+ GnbLibPciRMW (MAKE_SBDFO (0, 0, 0x18, 0x1, 0xBC), AccessWidth32, 0, *(RestoreValues + 1), StdHeader);
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/*
+ * Check if card required test for deskew workaround
+ *
+ *
+ *
+ * @param[in] DeviceId Device ID
+ */
+
+BOOLEAN
+PcieIsDeskewCardDetected (
+ IN UINT16 DeviceId
+ )
+{
+ if ((DeviceId >= 0x3150 && DeviceId <= 0x3152) || (DeviceId == 0x3154) ||
+ (DeviceId == 0x3E50) || (DeviceId == 0x3E54) ||
+ ((DeviceId & 0xfff8) == 0x5460) || ((DeviceId & 0xfff8) == 0x5B60)) {
+ return TRUE;
+ }
+ return FALSE;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/PcieWorkaroundsV2.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/PcieWorkaroundsV2.h
new file mode 100644
index 0000000..3fefdd2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbPcieTrainingV2/PcieWorkaroundsV2.h
@@ -0,0 +1,55 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Various workarounds
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _PCIEWORKAROUNDSV2_H_
+#define _PCIEWORKAROUNDSV2_H_
+
+GFX_WORKAROUND_STATUS
+PcieGfxCardWorkaroundV2 (
+ IN PCI_ADDR Port,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSSocketLib/GnbSSocketLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSSocketLib/GnbSSocketLib.c
new file mode 100644
index 0000000..4370506
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSSocketLib/GnbSSocketLib.c
@@ -0,0 +1,169 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB Single Socket Library
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85947 $ @e \$Date: 2013-01-14 17:25:21 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuServices.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbLib.h"
+#include "GnbLibPciAcc.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBSSOCKETLIB_GNBSSOCKETLIB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+PCI_ADDR
+GnbFmGetPciAddress (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GnbFmGetBusDecodeRange (
+ IN GNB_HANDLE *GnbHandle,
+ OUT UINT8 *StartBusNumber,
+ OUT UINT8 *EndBusNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GnbFmGetLinkId (
+ IN GNB_HANDLE *GnbHandle,
+ OUT UINT8 *LinkId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get Host bridge PCI Address
+ *
+ *
+ *
+ * @param[in] GnbHandle GNB handle
+ * @param[in] StdHeader Standard configuration header
+ * @retval PCI address of GNB for a given socket/silicon.
+ */
+
+PCI_ADDR
+GnbFmGetPciAddress (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR Gnb;
+ Gnb.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0);
+ return Gnb;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get bus range decoded by GNB
+ *
+ * Final bus allocation can not be assumed until AmdInitMid
+ *
+ * @param[in] GnbHandle GNB handle
+ * @param[out] StartBusNumber Beginning of the Bus Range
+ * @param[out] EndBusNumber End of the Bus Range
+ * @param[in] StdHeader Standard configuration header
+ * @retval Status
+ */
+
+AGESA_STATUS
+GnbFmGetBusDecodeRange (
+ IN GNB_HANDLE *GnbHandle,
+ OUT UINT8 *StartBusNumber,
+ OUT UINT8 *EndBusNumber,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ *StartBusNumber = 0x0;
+ *EndBusNumber = 0xff;
+ return AGESA_SUCCESS;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get link to which GNB connected to
+ *
+ *
+ * @param[in] GnbHandle GNB handle
+ * @param[out] LinkId Link to which GNB connected to
+ * @param[in] StdHeader Standard configuration header
+ * @retval Status
+ */
+
+AGESA_STATUS
+GnbFmGetLinkId (
+ IN GNB_HANDLE *GnbHandle,
+ OUT UINT8 *LinkId,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ *LinkId = 0x00;
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSbLib/GnbSbLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSbLib/GnbSbLib.c
new file mode 100644
index 0000000..209da23
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSbLib/GnbSbLib.c
@@ -0,0 +1,143 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * SB services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbCommonLib.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBSBLIB_GNBSBLIB_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+UINT32
+SbGetSbIoApicBaseAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+SbGetSbMmioBaseAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT16
+SbGetAlinkIoAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *Get SB IOAPIC Base Address
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval ApicBaseAddress
+ */
+UINT32
+SbGetSbIoApicBaseAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 ApicBaseAddress;
+ GnbLibIndirectIoBlockRead (0xCD6, 0xCD7, AccessWidth8, 0x34, 4, &ApicBaseAddress, StdHeader);
+ return ApicBaseAddress & 0xffffffe0;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ *Get SB MMIO Base Address
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval MMIO base address
+ */
+UINT32
+SbGetSbMmioBaseAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 MmioBaseAddress;
+ GnbLibIndirectIoBlockRead (0xCD6, 0xCD7, AccessWidth8, 0x24, 4, &MmioBaseAddress, StdHeader);
+ return MmioBaseAddress & 0xfffffffc;
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get Alink config address
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AlinkPortAddress
+ */
+/*----------------------------------------------------------------------------------------*/
+
+UINT16
+SbGetAlinkIoAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ UINT16 AlinkPortAddress;
+ GnbLibIndirectIoBlockRead (0xCD6, 0xCD7, AccessWidth8, 0xE0, 2, &AlinkPortAddress, StdHeader);
+ return AlinkPortAddress;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSbLib/GnbSbLib.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSbLib/GnbSbLib.h
new file mode 100644
index 0000000..516b77a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSbLib/GnbSbLib.h
@@ -0,0 +1,78 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * SB services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBSBLIB_H_
+#define _GNBSBLIB_H_
+
+#include "GnbPcie.h"
+
+UINT32
+SbGetSbIoApicBaseAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+SbGetSbMmioBaseAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT16
+SbGetAlinkIoAddress (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+SbPcieInitAspm (
+ IN PCIE_ASPM_TYPE Aspm,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+SbPcieLinkAspmControl (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ );
+
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSbLib/GnbSbPcie.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSbLib/GnbSbPcie.c
new file mode 100644
index 0000000..cc8cbf8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSbLib/GnbSbPcie.c
@@ -0,0 +1,142 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * GNB-SB link procedure
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbSbLib.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBSBLIB_GNBSBPCIE_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable/Disable ASPM on GNB-SB link
+ *
+ *
+ *
+ * @param[in] Engine Pointer to engine config descriptor
+ * @param[in] Pcie Pointer to global PCIe configuration
+ *
+ */
+
+AGESA_STATUS
+SbPcieLinkAspmControl (
+ IN PCIe_ENGINE_CONFIG *Engine,
+ IN PCIe_PLATFORM_CONFIG *Pcie
+ )
+{
+ AGESA_STATUS Status;
+ PCIE_ASPM_TYPE Aspm;
+
+ Aspm = Engine->Type.Port.PortData.LinkAspm;
+
+ Status = SbPcieInitAspm (Aspm, GnbLibGetHeader (Pcie));
+ if (Status != AGESA_SUCCESS) {
+ return AGESA_UNSUPPORTED;
+ }
+
+ excel950_fun4 (Engine->Type.Port.Address, Aspm, GnbLibGetHeader (Pcie));
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init SB ASPM.
+ * Enable ASPM states on SB
+ *
+ *
+ * @param[in] Aspm ASPM bitmap.
+ * @param[in] StdHeader Standard configuration header
+ */
+/*----------------------------------------------------------------------------------------*/
+
+AGESA_STATUS
+SbPcieInitAspm (
+ IN PCIE_ASPM_TYPE Aspm,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT16 AlinkPort;
+
+ AlinkPort = SbGetAlinkIoAddress (StdHeader);
+ ASSERT (AlinkPort != 0);
+ if (AlinkPort == 0) {
+ return AGESA_UNSUPPORTED;
+ }
+ GnbLibIoRMW (AlinkPort, AccessS3SaveWidth32, 0x0, 0x40000038, StdHeader);
+ GnbLibIoRMW (AlinkPort + 4, AccessS3SaveWidth32, 0x0, 0xA0, StdHeader);
+ GnbLibIoRMW (AlinkPort, AccessS3SaveWidth32, 0x0, 0x4000003c, StdHeader);
+ GnbLibIoRMW (AlinkPort + 4, AccessS3SaveWidth32, 0xffff00ff, 0x6900, StdHeader);
+ GnbLibIoRMW (AlinkPort, AccessS3SaveWidth32, 0x0, 0x80000068, StdHeader);
+ GnbLibIoRMW (AlinkPort + 4, AccessS3SaveWidth32, 0xfffffffc, Aspm, StdHeader);
+ return AGESA_SUCCESS;
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbScsLibV1/GnbScsLibV1.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbScsLibV1/GnbScsLibV1.c
new file mode 100644
index 0000000..9113029
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbScsLibV1/GnbScsLibV1.c
@@ -0,0 +1,198 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * NB services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "OptionGnb.h"
+#include "GnbSmuInitLibV7.h"
+#include "heapManager.h"
+#include "GnbFamServices.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBSCSLIBV1_GNBSCSLIBV1_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+#ifndef TYPE_D0F0xBC
+ #define TYPE_D0F0xBC 0x4
+#endif
+
+extern GNB_BUILD_OPTIONS GnbBuildOptions;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+GnbSmuInitLibV7139_fun0 (
+ IN GNB_HANDLE *GnbHandle,
+ IN UINT8 *ScsDataPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ DEV_OBJECT DevObject;
+ AGESA_STATUS Status;
+
+ IDS_PERF_TIMESTAMP (TP_BEGINGNBLOADSCSDATA, StdHeader);
+
+ Status = AGESA_SUCCESS;
+ if (GnbBuildOptions.CfgScsSupport == TRUE) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbSmuInitLibV7139_fun0 Enter\n");
+ //Check input parameters
+ ASSERT ((ScsDataPtr != NULL) && (StdHeader != NULL));
+ if ((ScsDataPtr == NULL) || (StdHeader == NULL)) {
+ return AGESA_ERROR;
+ }
+
+ //Verify the SCS block signature
+ ASSERT (*(UINT32 *)ScsDataPtr == GnbSmuInitLibV7136_macro0);
+ if (*(UINT32 *)ScsDataPtr != GnbSmuInitLibV7136_macro0) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "Verify SCS Binary fail\n", ScsDataPtr);
+ return AGESA_ERROR;
+ }
+
+ //Load SCS block
+ IDS_HDT_CONSOLE (GNB_TRACE, "Load SCS @%08x\n", ScsDataPtr);
+ DevObject.DevPciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0);
+ DevObject.GnbHandle = GnbHandle;
+ DevObject.StdHeader = StdHeader;
+ GnbSmuServiceRequestV7 (&DevObject, 0x50, (UINT32) (UINTN) ScsDataPtr, 0);
+
+ //Get SCS result and save to Heap
+ IDS_HDT_CONSOLE (GNB_TRACE, "Get SCS Result\n", ScsDataPtr);
+ Status = GnbSmuInitLibV7139_fun1 (GnbHandle, StdHeader);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "Get SCS Result %s\n", (Status == AGESA_SUCCESS) ? "Success" : "Fail");
+ }
+
+ IDS_PERF_TIMESTAMP (TP_ENDGNBLOADSCSDATA, StdHeader);
+ return Status;
+}
+
+AGESA_STATUS
+GnbSmuInitLibV7139_fun1 (
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 i;
+ UINT32 ScsResultAddr;
+ UINT32 *ScsResultBuf;
+ UINT32 NumApmWeights;
+ AGESA_STATUS Status;
+ DEV_OBJECT DevObject;
+ GNB_REGISTER_SERVICE *GnbRegisterAccessProtocol;
+ ALLOCATE_HEAP_PARAMS AllocateHeapParams;
+
+ Status = AGESA_SUCCESS;
+ DevObject.GnbHandle = GnbHandle;
+ DevObject.StdHeader = StdHeader;
+ DevObject.DevPciAddress = GnbGetHostPciAddress (GnbHandle);
+
+ Status = GnbLibLocateService (GnbRegisterAccessService, GnbGetSocketId (GnbHandle), (VOID **)&GnbRegisterAccessProtocol, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+
+ //Get the command result (A pointer to SMURAM)
+ ScsResultAddr = 0;
+ GnbUraGet (&DevObject, TRxSmuIntArgument, &ScsResultAddr);
+ IDS_HDT_CONSOLE (GNB_TRACE, "SMURAMAddr %08x ", ScsResultAddr);
+ ASSERT (ScsResultAddr != 0);
+
+
+ Status = GnbRegisterAccessProtocol->Read (GnbHandle, 0x4, ScsResultAddr + offsetof (SMU_RAM_CPU_INFO, CountApmWeights), &NumApmWeights, 0, StdHeader);
+ IDS_HDT_CONSOLE (GNB_TRACE, "NumApmWeights %d\n", NumApmWeights);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+
+ //Allocate heap for store the result
+ AllocateHeapParams.BufferHandle = AMD_SCS_SMU_RAM_INFO;
+ AllocateHeapParams.Persist = HEAP_LOCAL_CACHE;
+ AllocateHeapParams.BufferPtr = NULL;
+ AllocateHeapParams.RequestedBufferSize = sizeof (SMU_RAM_CPU_INFO) + SIZE_OF_APMWEIGHTS * NumApmWeights;
+ Status = HeapAllocateBuffer (&AllocateHeapParams, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+
+ ScsResultBuf = (UINT32 *)AllocateHeapParams.BufferPtr;
+ //Get the result point by RxSmuIntArgument from SMURAM
+ for (i = 0; i < (sizeof (SMU_RAM_CPU_INFO) / sizeof (UINT32) + NumApmWeights); i++) {
+ Status = GnbRegisterAccessProtocol->Read (GnbHandle, 0x4, ScsResultAddr, &ScsResultBuf[i], 0, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status != AGESA_SUCCESS) {
+ break;
+ }
+ ScsResultAddr += sizeof (UINT32);
+ }
+
+ if (Status != AGESA_SUCCESS) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "Fail on get SCS Result @%08x\n", ScsResultAddr);
+ HeapDeallocateBuffer (AMD_SCS_SMU_RAM_INFO, StdHeader);
+ } else {
+ }
+
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSmuLibV7/GnbSmuInitLibV7.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSmuLibV7/GnbSmuInitLibV7.c
new file mode 100644
index 0000000..2f40389
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSmuLibV7/GnbSmuInitLibV7.c
@@ -0,0 +1,330 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * NB services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85506 $ @e \$Date: 2013-01-08 15:38:33 -0600 (Tue, 08 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "S3SaveState.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "GnbPcieInitLibV1.h"
+#include "GnbSmuInitLibV7.h"
+#include "heapManager.h"
+#include "GnbFamServices.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBSMULIBV7_GNBSMUINITLIBV7_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+#define SMC_RAM_START_ADDR 0x20000ul
+#ifndef INVALID_SMU_MSG
+ #define INVALID_SMU_MSG 0xFF
+#endif
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+VOID
+GnbSmuServiceRequestV7S3Script (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 ContextLength,
+ IN VOID *Context
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * SMU service request
+ *
+ *
+ * @param[in] DevObject Pointer to Device object
+ * @param[in] RequestId Request ID
+ * @param[in] RequestArgument Request Argument
+ * @param[in] AccessFlags See GNB_ACCESS_FLAGS_* definitions
+ */
+
+VOID
+GnbSmuServiceRequestV7 (
+ IN DEV_OBJECT *DevObject,
+ IN UINT8 RequestId,
+ IN UINT32 RequestArgument,
+ IN UINT32 AccessFlags
+ )
+{
+ UINT32 BFIntDone;
+ UINT32 BFIntToggle;
+ UINT32 BFIntAck;
+ UINT32 RxSmuIntArgument;
+ URA_TUPLE UraTuple[2];
+ UINT32 IsMsgValid;
+
+ IsMsgValid = FALSE;
+ if (RequestId != INVALID_SMU_MSG) {
+ IsMsgValid = TRUE;
+ }
+
+ if (IsMsgValid == TRUE) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbSmuServiceRequestV7 Enter\n");
+ IDS_HDT_CONSOLE (NB_MISC, " Service Request %d\n", RequestId);
+ IDS_HDT_CONSOLE (NB_MISC, " Service Request Argument 0x%x\n", RequestArgument);
+
+ if ((AccessFlags & GNB_REG_ACC_FLAG_S3SAVE) != 0) {
+ SMU_MSG_CONTEXTV7 SmuMsgContext;
+ SmuMsgContext.GnbPciAddress.AddressValue = DevObject->DevPciAddress.AddressValue;
+ SmuMsgContext.RequestId = RequestId;
+ SmuMsgContext.RequestArgument = RequestArgument;
+ S3_SAVE_DISPATCH (DevObject->StdHeader, GnbSmuServiceRequestV7S3Script_ID, sizeof (SmuMsgContext), &SmuMsgContext);
+ }
+
+ do {
+ GnbUraGet (DevObject, TBfxSmuIntDone, &BFIntDone);
+ } while (BFIntDone == 0x0);
+
+ RxSmuIntArgument = RequestArgument;
+ GnbUraSet (DevObject, TRxSmuIntArgument, &RxSmuIntArgument);
+
+ GnbUraGet (DevObject, TBfxSmuIntToggle, &BFIntToggle);
+ UraTuple[0].Token = TBfxSmuIntToggle;
+ UraTuple[0].Value = ~BFIntToggle;
+ UraTuple[1].Token = TBfxSmuServiceIndex;
+ UraTuple[1].Value = RequestId;
+ GnbUraCombinedSet (DevObject, TRxSmuIntReq, &UraTuple[0], 2);
+
+ do {
+ GnbUraGet (DevObject, TBfxSmuIntAck, &BFIntAck);
+ } while (BFIntAck == 0x0);
+
+ do {
+ GnbUraGet (DevObject, TBfxSmuIntDone, &BFIntDone);
+ } while (BFIntDone == 0x0);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbSmuServiceRequestV7 Exit\n");
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * SMU service request for S3 script
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @param[in] ContextLength Context length
+ * @param[in] Context Pointer to Context
+ */
+
+VOID
+GnbSmuServiceRequestV7S3Script (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN UINT16 ContextLength,
+ IN VOID *Context
+ )
+{
+ SMU_MSG_CONTEXTV7 *SmuMsgContext;
+ DEV_OBJECT DevObject;
+ SmuMsgContext = (SMU_MSG_CONTEXTV7 *) Context;
+
+ DevObject.StdHeader = StdHeader;
+ DevObject.DevPciAddress = SmuMsgContext->GnbPciAddress;
+ DevObject.GnbHandle = GnbGetHandle (StdHeader);
+
+ GnbSmuServiceRequestV7 (&DevObject, SmuMsgContext->RequestId, SmuMsgContext->RequestArgument, 0);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * SMU firmware download
+ *
+ *
+ * @param[in] GnbHandle Pointer to GNB_HANDLE
+ * @param[in] Firmware Pointer t0 firmware
+ * @param[in] StdHeader Standard configuration header
+ */
+
+AGESA_STATUS
+GnbSmuFirmwareLoadV7 (
+ IN GNB_HANDLE *GnbHandle,
+ IN FIRMWARE_HEADER_V7 *Firmware,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ UINT32 BfxSmuProtectedMode;
+ UINT32 BfxSmuBootSeqDone;
+ UINT32 BfxSmuAuthDone;
+ UINT32 BfxSmuAuthPass;
+ UINT32 RxSmuAuthVector;
+ UINT32 BfxSmuRstReg;
+ UINT32 BfxSmuCkDisable;
+ UINT32 BfxSmuInterruptsEnabled;
+ UINT32 RxSmuRamStartAddr;
+ GNB_REGISTER_SERVICE *GnbRegisterAccessProtocol;
+ PCI_ADDR GnbPciAddress;
+ DEV_OBJECT DevObject;
+ URA_TUPLE UraTuple;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbSmuFirmwareLoadV7 Enter\n");
+ IDS_HDT_CONSOLE (NB_MISC, " Firmware version 0x%x\n", Firmware->Version);
+ IDS_OPTION_HOOK (IDS_REPORT_SMU_FW_VERSION, &(Firmware->Version), StdHeader);
+
+ GnbPciAddress = GnbGetHostPciAddress (GnbHandle);
+ Status = GnbLibLocateService (GnbRegisterAccessService, GnbGetSocketId (GnbHandle), (VOID **)&GnbRegisterAccessProtocol, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ DevObject.GnbHandle = GnbHandle;
+ DevObject.StdHeader = StdHeader;
+ DevObject.DevPciAddress.AddressValue = GnbPciAddress.AddressValue;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 2 & 10: make sure Rom firmware sequence is done\n");
+ // Step 2, 10, make sure Rom firmware sequence is done
+ do {
+ GnbUraGet (&DevObject, TBfxSmuBootSeqDone, &BfxSmuBootSeqDone);
+ } while (BfxSmuBootSeqDone == 0);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 1: check if firmware running in protected mode\n");
+ // Step 1, check if firmware running in protected mode
+ GnbUraGet (&DevObject, TBfxSmuProtectedMode, &BfxSmuProtectedMode);
+ if (BfxSmuProtectedMode == 0) {
+ // Step3, Clear firmware interrupt flags
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 3: Clear firmware interrupt flags\n");
+ //IDS_HDT_CONSOLE (GNB_TRACE, "Read register data 0x%x\n", FIRMWARE_FLAGS.Value);
+ BfxSmuInterruptsEnabled = 0;
+ GnbUraSet (&DevObject, TBfxSmuInterruptsEnabled, &BfxSmuInterruptsEnabled);
+ }
+
+ //Step 4, 11, Assert SMU reset
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 4, 11: Assert SMU reset\n");
+ BfxSmuRstReg = 1;
+ GnbUraSet (&DevObject, TBfxSmuRstReg, &BfxSmuRstReg);
+
+ // Step5, 12, Load firmware
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step5, 12, Load firmware\n");
+ // 4 means byte length of next address during firmware download
+ UraTuple.StepLength = 4;
+ UraTuple.Value = (UINT32) ((UINTN) (Firmware));
+ GnbUraCombinedSet (&DevObject, TRxSmuRamStartAddr | GNB_URA_STREAM_SET, &UraTuple, (Firmware->ImageSize >> 2));
+
+ if (BfxSmuProtectedMode == 0) {
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step6, write jmp to RAM firmware\n");
+ //Step 6, Write jmp to RAM firmware
+ RxSmuRamStartAddr = 0xE0000000 + ((SMC_RAM_START_ADDR + Firmware->HeaderSize) >> 2);
+ GnbUraSet (&DevObject, TRxSmuRomStartAddr, &RxSmuRamStartAddr);
+ } else {
+ //Step 13, Clear authentification done
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 13, Clear authentification done\n");
+ BfxSmuAuthDone = 0;
+ GnbUraSet (&DevObject, TBfxSmuAuthDone, &BfxSmuAuthDone);
+ }
+
+ // Step 7, 14 Enable SMU clock
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 7, 14 Enable SMU clock\n");
+ BfxSmuCkDisable = 0;
+ GnbUraSet (&DevObject, TBfxSmuCkDisable, &BfxSmuCkDisable);
+
+ //Step 8, 15, Deassert SMU reset
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 8, 15, Deassert SMU reset\n");
+ BfxSmuRstReg = 0;
+ GnbUraSet (&DevObject, TBfxSmuRstReg, &BfxSmuRstReg);
+
+ if (BfxSmuProtectedMode == 1) {
+ IDS_HDT_CONSOLE (NB_MISC, " Protected mode: poll init authentication vector\n");
+ // Step 16, Wait for rom firmware init authentication vector
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 16, Wait for rom firmware init authentication vector\n");
+ do {
+ GnbUraGet (&DevObject, TRxSmuAuthVector, &RxSmuAuthVector);
+ } while (RxSmuAuthVector != 0x400);
+ // Call Authentication service
+ GnbSmuServiceRequestV7 (&DevObject, 0, 0, 0);
+ IDS_HDT_CONSOLE (NB_MISC, " Protected mode: poll init authentication done\n");
+ // Wait for authentication done
+ do {
+ GnbUraGet (&DevObject, TBfxSmuAuthDone, &BfxSmuAuthDone);
+ } while (BfxSmuAuthDone == 0x0);
+
+ //Step 17, Check Authentication results
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 17, Check Authentication results\n");
+ GnbUraGet (&DevObject, TBfxSmuAuthPass, &BfxSmuAuthPass);
+ if (BfxSmuAuthPass == 0) {
+ IDS_HDT_CONSOLE (NB_MISC, " ERROR!!!Authentication fail!!!\n");
+ ASSERT (FALSE);
+ return AGESA_FATAL;
+ }
+ // Step 18, Clear firmware interrupt enable flag
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 18, Clear firmware interrupt enable flag\n");
+ BfxSmuInterruptsEnabled = 0;
+ GnbUraSet (&DevObject, TBfxSmuInterruptsEnabled, &BfxSmuInterruptsEnabled);
+
+ //Step 19, Assert SMU reset
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 19, Assert SMU reset\n");
+ BfxSmuRstReg = 1;
+ GnbUraSet (&DevObject, TBfxSmuRstReg, &BfxSmuRstReg);
+
+ //Step 20, Deassert SMU reset
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 20, Deassert SMU reset\n");
+ BfxSmuRstReg = 0;
+ GnbUraSet (&DevObject, TBfxSmuRstReg, &BfxSmuRstReg);
+ }
+
+ //Step 9, 21 Wait firmware to initialize
+ IDS_HDT_CONSOLE (GNB_TRACE, "Step 9, 21 Wait firmware to initialize\n");
+ do {
+ GnbUraGet (&DevObject, TBfxSmuInterruptsEnabled, &BfxSmuInterruptsEnabled);
+ } while (BfxSmuInterruptsEnabled == 0);
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbSmuFirmwareLoadV7 Exit\n");
+ return AGESA_SUCCESS;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSmuLibV7/GnbSmuInitLibV7.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSmuLibV7/GnbSmuInitLibV7.h
new file mode 100644
index 0000000..6f7f9d7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSmuLibV7/GnbSmuInitLibV7.h
@@ -0,0 +1,123 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * NB services
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85506 $ @e \$Date: 2013-01-08 15:38:33 -0600 (Tue, 08 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBNBINITLIBV7_H_
+#define _GNBNBINITLIBV7_H_
+
+#pragma pack (push, 1)
+#include "GnbUraServices.h"
+
+/// Firmware header
+typedef struct {
+ UINT32 Digest[5]; ///< Digest
+ UINT32 Version; ///< Version
+ UINT32 HeaderSize; ///< Header length
+ UINT32 Flags; ///< Flags
+ UINT32 EntryPoint; ///< Entry Point
+ UINT32 CodeSize; ///< Code Size
+ UINT32 ImageSize; ///< Image Size
+ UINT32 Rtos; ///< Rtos
+ UINT32 SoftRegisters; ///< Soft Registers
+ UINT32 DpmTable; ///< Dpm Table
+ UINT32 FanTable; ///< Fan Table
+ UINT32 CacConfigTable; ///< Cac Configuration Table
+ UINT32 CacStatusTable; ///< Cac Status Table
+ UINT32 mcRegisterTable; ///< mc Register Table
+ UINT32 mcArbDramTimingTable; ///< mc Arb Dram Timing Table
+ UINT32 Globals; ///< Globals
+ UINT32 Signature; ///< Signature
+ UINT32 Reserved[44]; ///< Reserved space
+} FIRMWARE_HEADER_V7;
+
+/// SMU service request contect
+typedef struct {
+ PCI_ADDR GnbPciAddress; ///< PCIe address of GNB
+ UINT8 RequestId; ///< Request/Msg ID
+ UINT32 RequestArgument; ///< Request/Msg Argument
+} SMU_MSG_CONTEXTV7;
+
+
+#define SIZE_OF_APMWEIGHTS (sizeof (UINT32))
+typedef struct {
+ UINT64 EnergyCountConstant;
+ UINT64 BoostTimeConstant;
+ UINT32 CountApmWeights; ///< length of APMWeights array
+// UINT32 ApmWeights[1]; ///< ApmWeights
+} SMU_RAM_CPU_INFO;
+
+
+#pragma pack (pop)
+
+VOID
+GnbSmuServiceRequestV7 (
+ IN DEV_OBJECT *DevObject,
+ IN UINT8 RequestId,
+ IN UINT32 RequestArgument,
+ IN UINT32 AccessFlags
+ );
+
+AGESA_STATUS
+GnbSmuFirmwareLoadV7 (
+ IN GNB_HANDLE *GnbHandle,
+ IN FIRMWARE_HEADER_V7 *Firmware,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#define GnbSmuInitLibV7136_macro0 STRING_TO_UINT32 ('!', 'S', 'C', 'S')
+
+AGESA_STATUS
+GnbSmuInitLibV7139_fun0(
+ IN GNB_HANDLE *GnbHandle,
+ IN UINT8 *ScsDataPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+GnbSmuInitLibV7139_fun1(
+ IN GNB_HANDLE *GnbHandle,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSview/GnbSview.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSview/GnbSview.c
new file mode 100644
index 0000000..4ebb28f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbSview/GnbSview.c
@@ -0,0 +1,128 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Interface to initialize Graphics Controller at mid POST
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbGfxConfig.h"
+#include "GnbGfxInitLibV1.h"
+#include "GnbCommonLib.h"
+#include "GnbGfxFamServices.h"
+#include "GnbRegistersCommon.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBSVIEW_GNBSVIEW_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+AGESA_STATUS
+GfxInitSview (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Init SVIEW configuration
+ *
+ *
+ *
+ * @param[in] StdHeader Standard configuration header
+ * @retval AGESA_STATUS
+ */
+
+AGESA_STATUS
+GfxInitSview (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ AGESA_STATUS AgesaStatus;
+ GFX_PLATFORM_CONFIG *Gfx;
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxInitSview Enter\n");
+ AgesaStatus = AGESA_SUCCESS;
+ Status = GfxLocateConfigData (StdHeader, &Gfx);
+ AGESA_STATUS_UPDATE (Status, AgesaStatus);
+ if (Status == AGESA_SUCCESS) {
+ if (GfxLibIsControllerPresent (StdHeader)) {
+ if (!GfxFmIsVbiosPosted (Gfx)) {
+ GFX_VBIOS_IMAGE_INFO VbiosImageInfo;
+ LibAmdMemCopy (&VbiosImageInfo.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+ VbiosImageInfo.ImagePtr = NULL;
+ VbiosImageInfo.GfxPciAddress = Gfx->GfxPciAddress;
+ VbiosImageInfo.Flags = GFX_VBIOS_IMAGE_FLAG_SPECIAL_POST;
+ GnbLibPciRMW (Gfx->GfxPciAddress.AddressValue | 0x4, AccessS3SaveWidth8, 0xff, BIT1 | BIT2 | BIT0, StdHeader);
+ Status = AgesaGetVbiosImage (0, &VbiosImageInfo);
+ if (Status == AGESA_SUCCESS && VbiosImageInfo.ImagePtr != NULL) {
+ GfxLibCopyMemToFb (VbiosImageInfo.ImagePtr, 0, (*((UINT8*) VbiosImageInfo.ImagePtr + 2)) << 9, Gfx);
+ } else {
+ GfxFmDisableController (StdHeader);
+ AgesaStatus = AGESA_ERROR;
+ }
+ GnbLibPciRMW (Gfx->GfxPciAddress.AddressValue | 0x4, AccessS3SaveWidth8, 0xf8, BIT1 | BIT2, StdHeader);
+ }
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GfxInitSview Exit [0x%x]\n", AgesaStatus);
+ return AgesaStatus;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbTable/GnbTable.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbTable/GnbTable.c
new file mode 100644
index 0000000..82b2348
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbTable/GnbTable.c
@@ -0,0 +1,357 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access PCI config space registers
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "cpuFamilyTranslation.h"
+#include "Gnb.h"
+#include "GnbPcieConfig.h"
+#include "GnbLib.h"
+#include "GnbTimerLib.h"
+#include "GnbFamServices.h"
+#include "GnbTable.h"
+#include "Filecode.h"
+#define FILECODE PROC_GNB_MODULES_GNBTABLE_GNBTABLE_FILECODE
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+GnbProcessTableRegisterRmw (
+ IN GNB_HANDLE *GnbHandle,
+ IN GNB_REGISTER_SERVICE *GnbRegisterAccessProtocol,
+ IN GNB_RMW_BLOCK *Data,
+ IN UINT32 Flags,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Process table
+ *
+ * @param[in] GnbHandle Gnb handle
+ * @param[in] Table Table pointer
+ * @param[in] Property Property
+ * @param[in] Flags Flags
+ * @param[in] StdHeader Standard configuration header
+ */
+
+AGESA_STATUS
+GnbProcessTable (
+ IN GNB_HANDLE *GnbHandle,
+ IN GNB_TABLE *Table,
+ IN UINT32 Property,
+ IN UINT32 Flags,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *EntryPointer;
+ UINT64 Data;
+ UINT64 Temp;
+ UINT64 Mask;
+ UINT32 WriteAccFlags;
+ GNB_REGISTER_SERVICE *GnbRegisterAccessProtocol;
+ CPU_LOGICAL_ID LogicalId;
+ AGESA_STATUS Status;
+
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbProcessTableExt Enter\n");
+ IDS_HDT_CONSOLE (GNB_TRACE, " Property - 0x%08x\n", Property);
+
+ GetLogicalIdOfSocket (GnbGetSocketId (GnbHandle), &LogicalId, StdHeader);
+ EntryPointer = (UINT8 *) Table;
+ WriteAccFlags = 0;
+ if ((Flags & GNB_TABLE_FLAGS_FORCE_S3_SAVE) != 0) {
+ WriteAccFlags |= GNB_REG_ACC_FLAG_S3SAVE;
+ }
+
+ Status = GnbLibLocateService (GnbRegisterAccessService, GnbGetSocketId (GnbHandle), (VOID **)&GnbRegisterAccessProtocol, StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ while (*EntryPointer != GnbEntryTerminate) {
+ Data = 0;
+ Temp = 0;
+ switch (*EntryPointer) {
+ case GnbEntryWr:
+ GnbRegisterAccessProtocol->Write (
+ GnbHandle,
+ ((GNB_TABLE_ENTRY_WR*) EntryPointer)->RegisterSpaceType,
+ ((GNB_TABLE_ENTRY_WR*) EntryPointer)->Address,
+ &((GNB_TABLE_ENTRY_WR*) EntryPointer)->Value,
+ WriteAccFlags,
+ StdHeader
+ );
+ EntryPointer = EntryPointer + sizeof (GNB_TABLE_ENTRY_WR);
+ break;
+ case GnbEntryPropertyWr:
+ if ((Property & ((GNB_TABLE_ENTRY_PROPERTY_WR *) EntryPointer)->Property) != 0) {
+ GnbRegisterAccessProtocol->Write (
+ GnbHandle,
+ ((GNB_TABLE_ENTRY_PROPERTY_WR *) EntryPointer)->RegisterSpaceType,
+ ((GNB_TABLE_ENTRY_PROPERTY_WR *) EntryPointer)->Address,
+ &((GNB_TABLE_ENTRY_PROPERTY_WR *) EntryPointer)->Value,
+ WriteAccFlags,
+ StdHeader
+ );
+ }
+ EntryPointer = EntryPointer + sizeof (GNB_TABLE_ENTRY_PROPERTY_WR);
+ break;
+ case GnbEntryFullWr:
+ if ((Property & ((GNB_TABLE_ENTRY_FULL_WR*) EntryPointer)->Property) != 0) {
+ if ((LogicalId.Revision & ((GNB_TABLE_ENTRY_FULL_WR*) EntryPointer)->Revision) != 0) {
+ GnbRegisterAccessProtocol->Write (
+ GnbHandle,
+ ((GNB_TABLE_ENTRY_FULL_WR*) EntryPointer)->RegisterSpaceType,
+ ((GNB_TABLE_ENTRY_FULL_WR*) EntryPointer)->Address,
+ &((GNB_TABLE_ENTRY_FULL_WR*) EntryPointer)->Value,
+ WriteAccFlags,
+ StdHeader
+ );
+ }
+ }
+ EntryPointer = EntryPointer + sizeof (GNB_TABLE_ENTRY_FULL_WR);
+ break;
+ case GnbEntryRmw:
+ GnbProcessTableRegisterRmw (
+ GnbHandle,
+ GnbRegisterAccessProtocol,
+ &((GNB_TABLE_ENTRY_RMW *) EntryPointer)->Data,
+ WriteAccFlags,
+ StdHeader
+ );
+ EntryPointer = EntryPointer + sizeof (GNB_TABLE_ENTRY_RMW);
+ break;
+ case GnbEntryPropertyRmw:
+ if ((Property & ((GNB_TABLE_ENTRY_PROPERTY_RMW *) EntryPointer)->Property) != 0) {
+ GnbProcessTableRegisterRmw (
+ GnbHandle,
+ GnbRegisterAccessProtocol,
+ &((GNB_TABLE_ENTRY_PROPERTY_RMW *) EntryPointer)->Data,
+ WriteAccFlags,
+ StdHeader
+ );
+ }
+ EntryPointer = EntryPointer + sizeof (GNB_TABLE_ENTRY_PROPERTY_RMW);
+ break;
+ case GnbEntryRevRmw:
+ if ((LogicalId.Revision & ((GNB_TABLE_ENTRY_REV_RMW *) EntryPointer)->Revision) != 0) {
+ GnbProcessTableRegisterRmw (
+ GnbHandle,
+ GnbRegisterAccessProtocol,
+ &((GNB_TABLE_ENTRY_REV_RMW *) EntryPointer)->Data,
+ WriteAccFlags,
+ StdHeader
+ );
+ }
+ EntryPointer = EntryPointer + sizeof (GNB_TABLE_ENTRY_REV_RMW);
+ break;
+ case GnbEntryFullRmw:
+ if ((Property & ((GNB_TABLE_ENTRY_FULL_RMW *) EntryPointer)->Property) != 0) {
+ if ((LogicalId.Revision & ((GNB_TABLE_ENTRY_FULL_RMW *) EntryPointer)->Revision) != 0) {
+ GnbProcessTableRegisterRmw (
+ GnbHandle,
+ GnbRegisterAccessProtocol,
+ &((GNB_TABLE_ENTRY_FULL_RMW *) EntryPointer)->Data,
+ WriteAccFlags,
+ StdHeader
+ );
+ }
+ }
+ EntryPointer = EntryPointer + sizeof (GNB_TABLE_ENTRY_FULL_RMW);
+ break;
+ case GnbEntryPoll:
+ do {
+ GnbRegisterAccessProtocol->Read (
+ GnbHandle,
+ ((GNB_TABLE_ENTRY_POLL *) EntryPointer)->RegisterSpaceType,
+ ((GNB_TABLE_ENTRY_POLL *) EntryPointer)->Address,
+ &Data,
+ 0,
+ StdHeader
+ );
+ } while ((Data & ((GNB_TABLE_ENTRY_POLL*) EntryPointer)->AndMask) != ((GNB_TABLE_ENTRY_POLL*) EntryPointer)->CompareValue);
+ EntryPointer = EntryPointer + sizeof (GNB_TABLE_ENTRY_POLL);
+ break;
+ case GnbEntryPropertyPoll:
+ if ((Property & ((GNB_TABLE_ENTRY_PROPERTY_POLL *) EntryPointer)->Property) != 0) {
+ do {
+ GnbRegisterAccessProtocol->Read (
+ GnbHandle,
+ ((GNB_TABLE_ENTRY_PROPERTY_POLL *) EntryPointer)->RegisterSpaceType,
+ ((GNB_TABLE_ENTRY_PROPERTY_POLL *) EntryPointer)->Address,
+ &Data,
+ 0,
+ StdHeader
+ );
+ } while ((Data & ((GNB_TABLE_ENTRY_PROPERTY_POLL *) EntryPointer)->AndMask) != ((GNB_TABLE_ENTRY_PROPERTY_POLL *) EntryPointer)->CompareValue);
+ }
+ EntryPointer = EntryPointer + sizeof (GNB_TABLE_ENTRY_PROPERTY_POLL);
+ break;
+ case GnbEntryFullPoll:
+ if ((Property & ((GNB_TABLE_ENTRY_FULL_POLL *) EntryPointer)->Property) != 0) {
+ if ((LogicalId.Revision & ((GNB_TABLE_ENTRY_FULL_RMW *) EntryPointer)->Revision) != 0) {
+ do {
+ GnbRegisterAccessProtocol->Read (
+ GnbHandle,
+ ((GNB_TABLE_ENTRY_FULL_POLL *) EntryPointer)->RegisterSpaceType,
+ ((GNB_TABLE_ENTRY_FULL_POLL *) EntryPointer)->Address,
+ &Data,
+ 0,
+ StdHeader
+ );
+ } while ((Data & ((GNB_TABLE_ENTRY_FULL_POLL *) EntryPointer)->AndMask) != ((GNB_TABLE_ENTRY_FULL_POLL *) EntryPointer)->CompareValue);
+ }
+ }
+ EntryPointer = EntryPointer + sizeof (GNB_TABLE_ENTRY_FULL_POLL);
+ break;
+ case GnbEntryCopy:
+ GnbRegisterAccessProtocol->Read (
+ GnbHandle,
+ ((GNB_TABLE_ENTRY_COPY*) EntryPointer)->SrcRegisterSpaceType,
+ ((GNB_TABLE_ENTRY_COPY*) EntryPointer)->SrcAddress,
+ &Data,
+ 0,
+ StdHeader
+ );
+ Mask = (1ull << ((GNB_TABLE_ENTRY_COPY*) EntryPointer)->SrcFieldWidth) - 1;
+ Data = (Data >> ((GNB_TABLE_ENTRY_COPY*) EntryPointer)->SrcFieldOffset) & Mask;
+ GnbRegisterAccessProtocol->Read (
+ GnbHandle,
+ ((GNB_TABLE_ENTRY_COPY*) EntryPointer)->DestRegisterSpaceType,
+ ((GNB_TABLE_ENTRY_COPY*) EntryPointer)->DestAddress,
+ &Temp,
+ 0,
+ StdHeader
+ );
+ Mask = (1ull << ((GNB_TABLE_ENTRY_COPY*) EntryPointer)->DestFieldWidth) - 1;
+ Temp = Temp & ( ~ (Mask << ((GNB_TABLE_ENTRY_COPY*) EntryPointer)->DestFieldOffset));
+ Temp = Temp | ((Data & Mask) << ((GNB_TABLE_ENTRY_COPY*) EntryPointer)->DestFieldOffset);
+ GnbRegisterAccessProtocol->Write (
+ GnbHandle,
+ ((GNB_TABLE_ENTRY_COPY*) EntryPointer)->DestRegisterSpaceType,
+ ((GNB_TABLE_ENTRY_COPY*) EntryPointer)->DestAddress,
+ &Temp,
+ WriteAccFlags,
+ StdHeader
+ );
+ EntryPointer = EntryPointer + sizeof (GNB_TABLE_ENTRY_COPY);
+ break;
+ case GnbEntryStall:
+ if ((WriteAccFlags & GNB_TABLE_FLAGS_FORCE_S3_SAVE) != 0) {
+ GnbLibStallS3Save (((GNB_TABLE_ENTRY_STALL*) EntryPointer)->Microsecond, StdHeader);
+ } else {
+ GnbLibStall (((GNB_TABLE_ENTRY_STALL*) EntryPointer)->Microsecond, StdHeader);
+ }
+ EntryPointer = EntryPointer + sizeof (GNB_TABLE_ENTRY_STALL);
+ break;
+ default:
+ ASSERT (FALSE);
+ IDS_HDT_CONSOLE (NB_MISC, " ERROR!!! Register table parse\n");
+ return AGESA_ERROR;
+ }
+ }
+ IDS_HDT_CONSOLE (GNB_TRACE, "GnbProcessTableExt Exit\n");
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Supporting function for register read modify write
+ *
+ * @param[in] GnbHandle Gnb handle
+ * @param[in] GnbRegisterAccessProtocol Register access protocol
+ * @param[in] Data Data pointer
+ * @param[in] Flags Flags
+ * @param[in] StdHeader Standard configuration header
+ */
+
+VOID
+STATIC
+GnbProcessTableRegisterRmw (
+ IN GNB_HANDLE *GnbHandle,
+ IN GNB_REGISTER_SERVICE *GnbRegisterAccessProtocol,
+ IN GNB_RMW_BLOCK *Data,
+ IN UINT32 Flags,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT64 Value;
+ Value = 0;
+ GnbRegisterAccessProtocol->Read (
+ GnbHandle,
+ Data->RegisterSpaceType,
+ Data->Address,
+ &Value,
+ 0,
+ StdHeader
+ );
+ Value = (Value & (~ (UINT64) Data->AndMask)) | Data->OrMask;
+ GnbRegisterAccessProtocol->Write (
+ GnbHandle,
+ Data->RegisterSpaceType,
+ Data->Address,
+ &Value,
+ Flags,
+ StdHeader
+ );
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbTable/GnbTable.h b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbTable/GnbTable.h
new file mode 100644
index 0000000..52693f4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbTable/GnbTable.h
@@ -0,0 +1,238 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access PCI config space registers
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 85947 $ @e \$Date: 2013-01-14 17:25:21 -0600 (Mon, 14 Jan 2013) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _GNBTABLE_H_
+#define _GNBTABLE_H_
+
+#include "GnbPcie.h"
+
+#pragma pack (push, 1)
+
+#define GNB_TABLE_FLAGS_FORCE_S3_SAVE 0x00000001ul
+
+typedef UINT8 GNB_TABLE;
+
+#define __DATA(x) x
+
+#define _DATA32(Data) (__DATA(Data)) & 0xFF, ((__DATA(Data)) >> 8) & 0xFF, ((__DATA(Data)) >> 16) & 0xFF, ((__DATA(Data)) >> 24) & 0xFF
+#define _DATA64(Data) _DATA32(Data & 0xfffffffful) , _DATA32(Data >> 32)
+
+/// Entry type
+typedef enum {
+ GnbEntryWr, ///< Write register
+ GnbEntryPropertyWr, ///< Write register check property
+ GnbEntryFullWr, ///< Write Rgister check revision and property
+ GnbEntryRmw, ///< Read Modify Write register
+ GnbEntryPropertyRmw, ///< Read Modify Write register check property
+ GnbEntryRevRmw, ///< Read Modify Write register check revision
+ GnbEntryFullRmw, ///< Read Modify Write register check revision and property
+ GnbEntryPoll, ///< Poll register
+ GnbEntryPropertyPoll, ///< Poll register check property
+ GnbEntryFullPoll, ///< Poll register check property
+ GnbEntryCopy, ///< Copy field from one register to another
+ GnbEntryStall, ///< Copy field from one register to another
+ GnbEntryTerminate = 0xFF ///< Terminate table
+} GNB_TABLE_ENTRY_TYPE;
+
+#define GNB_ENTRY_WR(RegisterSpaceType, Address, Value) \
+ GnbEntryWr, RegisterSpaceType, _DATA32 (Address), _DATA32 (Value)
+
+/// Write register entry
+typedef struct {
+ UINT8 EntryType; ///< Entry type
+ UINT8 RegisterSpaceType; ///< Register space
+ UINT32 Address; ///< Register address
+ UINT32 Value; ///< Value
+} GNB_TABLE_ENTRY_WR;
+
+#define GNB_ENTRY_PROPERTY_WR(Property, RegisterSpaceType, Address, Value) \
+ GnbEntryPropertyWr, _DATA32 (Property), RegisterSpaceType, _DATA32 (Address), _DATA32 (Value)
+
+/// Write register entry
+typedef struct {
+ UINT8 EntryType; ///< Entry type
+ UINT32 Property; ///< Property
+ UINT8 RegisterSpaceType; ///< Register space
+ UINT32 Address; ///< Register address
+ UINT32 Value; ///< Value
+} GNB_TABLE_ENTRY_PROPERTY_WR;
+
+
+#define GNB_ENTRY_RMW(RegisterSpaceType, Address, AndMask, OrMask) \
+ GnbEntryRmw, RegisterSpaceType, _DATA32 (Address), _DATA32 (AndMask), _DATA32 (OrMask)
+
+///Read Modify Write data Block
+typedef struct {
+ UINT8 RegisterSpaceType; ///< Register space
+ UINT32 Address; ///< Register address
+ UINT32 AndMask; ///< And Mask
+ UINT32 OrMask; ///< Or Mask
+} GNB_RMW_BLOCK;
+
+/// Read Modify Write register entry
+typedef struct {
+ UINT8 EntryType; ///< Entry type
+ GNB_RMW_BLOCK Data; ///< Data
+} GNB_TABLE_ENTRY_RMW;
+
+#define GNB_ENTRY_FULL_WR(Property, Revision, RegisterSpaceType, Address, Value) \
+ GnbEntryFullWr, _DATA32 (Property), _DATA64 (Revision), RegisterSpaceType, _DATA32 (Address), _DATA32 (Value)
+
+/// Write register entry
+typedef struct {
+ UINT8 EntryType; ///< Entry type
+ UINT32 Property; ///< Property
+ UINT64 Revision; ///< Revision
+ UINT8 RegisterSpaceType; ///< Register space
+ UINT32 Address; ///< Register address
+ UINT32 Value; ///< Value
+} GNB_TABLE_ENTRY_FULL_WR;
+
+
+#define GNB_ENTRY_PROPERTY_RMW(Property, RegisterSpaceType, Address, AndMask, OrMask) \
+ GnbEntryPropertyRmw, _DATA32 (Property), RegisterSpaceType, _DATA32 (Address), _DATA32 (AndMask), _DATA32 (OrMask)
+
+/// Read Modify Write register entry
+typedef struct {
+ UINT8 EntryType; ///< Entry type
+ UINT32 Property; ///< Property
+ GNB_RMW_BLOCK Data; ///< Data
+} GNB_TABLE_ENTRY_PROPERTY_RMW;
+
+#define GNB_ENTRY_REV_RMW(Rev, RegisterSpaceType, Address, AndMask, OrMask) \
+ GnbEntryRevRmw, _DATA64 (Rev), RegisterSpaceType, _DATA32 (Address), _DATA32 (AndMask), _DATA32 (OrMask)
+
+/// Read Modify Write register entry
+typedef struct {
+ UINT8 EntryType; ///< Entry type
+ UINT64 Revision; ///< revision
+ GNB_RMW_BLOCK Data; ///< Data
+} GNB_TABLE_ENTRY_REV_RMW;
+
+#define GNB_ENTRY_FULL_RMW(Property, Revision, RegisterSpaceType, Address, AndMask, OrMask) \
+ GnbEntryFullRmw, _DATA32 (Property), _DATA64 (Revision), RegisterSpaceType, _DATA32 (Address), _DATA32 (AndMask), _DATA32 (OrMask)
+
+/// Read Modify Write register entry
+typedef struct {
+ UINT8 EntryType; ///< Entry type
+ UINT32 Property; ///< Property
+ UINT64 Revision; ///< Revision
+ GNB_RMW_BLOCK Data; ///< Data
+} GNB_TABLE_ENTRY_FULL_RMW;
+
+#define GNB_ENTRY_POLL(RegisterSpaceType, Address, AndMask, CompareValue) \
+ GnbEntryPoll, RegisterSpaceType, _DATA32 (Address), _DATA32 (AndMask), _DATA32 (CompareValue)
+/// Poll register entry
+typedef struct {
+ UINT8 EntryType; ///< Entry type
+ UINT8 RegisterSpaceType; ///< Register space
+ UINT32 Address; ///< Register address
+ UINT32 AndMask; ///< End mask
+ UINT32 CompareValue; ///< Compare value
+} GNB_TABLE_ENTRY_POLL;
+
+#define GNB_ENTRY_PROPERTY_POLL(Property, RegisterSpaceType, Address, AndMask, CompareValue) \
+ GnbEntryPropertyPoll, _DATA32 (Property), RegisterSpaceType, _DATA32 (Address), _DATA32 (AndMask), _DATA32 (CompareValue)
+/// Poll register entry
+typedef struct {
+ UINT8 EntryType; ///< Entry type
+ UINT32 Property; ///< Property
+ UINT8 RegisterSpaceType; ///< Register space
+ UINT32 Address; ///< Register address
+ UINT32 AndMask; ///< End mask
+ UINT32 CompareValue; ///< Compare value
+} GNB_TABLE_ENTRY_PROPERTY_POLL;
+
+#define GNB_ENTRY_FULL_POLL(Property, Revision, RegisterSpaceType, Address, AndMask, CompareValue) \
+ GnbEntryFullPoll, _DATA32 (Property), _DATA64 (Revision), RegisterSpaceType, _DATA32 (Address), _DATA32 (AndMask), _DATA32 (CompareValue)
+/// Poll register entry
+typedef struct {
+ UINT8 EntryType; ///< Entry type
+ UINT32 Property; ///< Property
+ UINT64 Revision; ///< Revision
+ UINT8 RegisterSpaceType; ///< Register space
+ UINT32 Address; ///< Register address
+ UINT32 AndMask; ///< End mask
+ UINT32 CompareValue; ///< Compare value
+} GNB_TABLE_ENTRY_FULL_POLL;
+
+#define GNB_ENTRY_COPY(DestRegSpaceType, DestAddress, DestFieldOffset, DestFieldWidth, SrcRegisterSpaceType, SrcAddress, SrcFieldOffset, SrcFieldWidth) \
+ GnbEntryCopy, DestRegSpaceType, _DATA32 (DestAddress), DestFieldOffset, DestFieldWidth, SrcRegisterSpaceType, _DATA32 (SrcAddress), SrcFieldOffset, SrcFieldWidth
+
+/// Copy register entry
+typedef struct {
+ UINT8 EntryType; ///< Entry type
+ UINT8 DestRegisterSpaceType; ///< Register space
+ UINT32 DestAddress; ///< Register address
+ UINT8 DestFieldOffset; ///< Field Offset
+ UINT8 DestFieldWidth; ///< Field Width
+ UINT8 SrcRegisterSpaceType; ///< Register space
+ UINT32 SrcAddress; ///< Register address
+ UINT8 SrcFieldOffset; ///< Field Offset
+ UINT8 SrcFieldWidth; ///< Field Width
+} GNB_TABLE_ENTRY_COPY;
+
+#define GNB_ENTRY_STALL(Microsecond) \
+ GnbEntryStall, _DATA32 (Microsecond)
+
+/// Write register entry
+typedef struct {
+ UINT8 EntryType; ///< Entry type
+ UINT32 Microsecond; ///< Value
+} GNB_TABLE_ENTRY_STALL;
+
+#define GNB_ENTRY_TERMINATE GnbEntryTerminate
+
+AGESA_STATUS
+GnbProcessTable (
+ IN GNB_HANDLE *GnbHandle,
+ IN GNB_TABLE *Table,
+ IN UINT32 Property,
+ IN UINT32 Flags,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#pragma pack (pop)
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbUraLibV1/GnbUraLibV1.c b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbUraLibV1/GnbUraLibV1.c
new file mode 100644
index 0000000..7156f7e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/GNB/Modules/GnbUraLibV1/GnbUraLibV1.c
@@ -0,0 +1,388 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Service procedure to access PCI config space registers
+ *
+ *
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: GNB
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "Gnb.h"
+#include "GnbLib.h"
+#include "GnbPcieConfig.h"
+#include "GnbCommonLib.h"
+#include "GnbUraServices.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_GNB_MODULES_GNBURALIBV1_GNBURALIBV1_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+UINT8 RegisterDomainMap[] = {
+ 0x0, ///< Stub
+ 0x0, ///< Stub
+ 0x64, ///< 0x2
+ 0x98, ///< 0x3
+ 0xB8, ///< TYPE_D0F0xB8
+ 0xFD ///< End
+};
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Convert URA Token to register address and field location
+ *
+ * @param[in] UraToken Register of bit field identifier
+ * @param[in] UraTable Pointer to register token table
+ * @param[in, out] TokenInfo Pointer to URA_TOKEN_INFO structure
+ *
+ * @retval UraToken Token is defined
+ * @retval _UNUSED Token is undefined
+ *
+ */
+URA_TOKEN
+STATIC
+UraTranslateToken (
+ IN URA_TOKEN UraToken,
+ IN URA_ENTRY *UraTable,
+ IN OUT URA_TOKEN_INFO *TokenInfo
+ )
+{
+ URA_TOKEN_STRUCT Token;
+ URA_FIELD_16B_ENTRY *Field16;
+ URA_REGISTER_32B_ENTRY *Reg32;
+ URA_REGISTER_64B_ENTRY *Reg64;
+
+ Token.Encode = UraToken;
+ Reg32 = NULL;
+ Reg64 = NULL;
+ Field16 = NULL;
+
+ switch (Token.Parser.Type) {
+ //
+ // Parse 16 bit field encoding
+ //
+ case URA_TYPE_FIELD_16:
+ Field16 = (URA_FIELD_16B_ENTRY *) &(UraTable[Token.Parser.Index]);
+ TokenInfo->BfWidth = (UINT8) Field16->BfWidth;
+ TokenInfo->BfOffset = (UINT8) Field16->BfOffset;
+ while (Field16->Offset == 0) {
+ Token.Parser.Index -= 15;
+ Field16 = (URA_FIELD_16B_ENTRY *) &UraTable[Token.Parser.Index];
+ }
+
+ ASSERT (Field16->Offset != 0);
+
+ if (Token.Parser.ParentType == URA_TOKEN_PARENT_TYPE_32) {
+ Token.Parser.Index -= (Field16->Offset - 1) * 2 + 2;
+ Reg32 = (URA_REGISTER_32B_ENTRY *) &UraTable[Token.Parser.Index];
+ } else if (Token.Parser.ParentType == URA_TOKEN_PARENT_TYPE_64) {
+ Token.Parser.Index -= Field16->Offset + 3;
+ Reg64 = (URA_REGISTER_64B_ENTRY *) &(UraTable[Token.Parser.Index]);
+ } else {
+ ASSERT (FALSE);
+ return _UNUSED;
+ }
+
+ TokenInfo->WholeRegAccess = FALSE;
+ break;
+
+ //
+ // Parse 32 bit register encoding
+ //
+ case URA_TYPE_REGISTER_32:
+ Reg32 = (URA_REGISTER_32B_ENTRY *) &UraTable[Token.Parser.Index];
+ if (Reg32->Address == _UNUSED) {
+ return _UNUSED;
+ }
+ TokenInfo->WholeRegAccess = TRUE;
+ break;
+
+ //
+ // Parse 64 bit register encoding
+ //
+ case URA_TYPE_REGISTER_64:
+ Reg64 = (URA_REGISTER_64B_ENTRY *) &(UraTable[Token.Parser.Index]);
+ if (Reg64->DomainAddress == _UNUSED) {
+ return _UNUSED;
+ }
+ TokenInfo->WholeRegAccess = TRUE;
+ break;
+
+ default:
+ ASSERT (FALSE);
+ }
+
+ // Get register address
+ if ((Token.Parser.ParentType == URA_TOKEN_PARENT_TYPE_32) && (Reg32 != NULL)) {
+ TokenInfo->RegAddress = Reg32->Address;
+ TokenInfo->RegDomainType = 0;
+ } else if ((Token.Parser.ParentType == URA_TOKEN_PARENT_TYPE_64) && (Reg64 != NULL)) {
+ TokenInfo->RegAddress = (UINT32)Reg64->DomainAddress;
+ TokenInfo->RegDomainType = (UINT8)Reg64->DomainType;
+ } else {
+ ASSERT (FALSE);
+ return _UNUSED;
+ }
+
+ TokenInfo->MethodType = Token.Parser.Selector;
+
+ // Patch DomainType field
+ if (TokenInfo->MethodType == TYPE_GNB_INDIRECT_ACCESS) {
+ TokenInfo->RegDomainType = RegisterDomainMap[TokenInfo->RegDomainType];
+ }
+
+ TokenInfo->Flags = Token.Parser.S3Save;
+ TokenInfo->StreamSet = Token.Parser.StreamSet;
+
+ return Token.Encode;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Gnb Unified Register Access method
+ *
+ *
+ * @param[in] Device Standard configuration header
+ * @param[in] UraToken Context length
+ * @param[in, out] Value Pointer to Context
+ */
+VOID
+GnbUraGet (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN UraToken,
+ IN OUT VOID *Value
+ )
+{
+ AGESA_STATUS Status;
+ GNB_URA_SERVICE *GnbUraProtocol;
+ URA_TOKEN_INFO TokenInfo;
+ URA_ENTRY *UraTable;
+ UINT32 UraTableAddress;
+
+ UraTable = NULL;
+ Status = GnbLibLocateService (GnbUraService, GnbGetSocketId (Device->GnbHandle), (VOID **)&GnbUraProtocol, Device->StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ GnbUraProtocol->GnbUraLocateRegTbl (Device, &UraTableAddress);
+ UraTable = (URA_ENTRY *) ((UINTN)UraTableAddress);
+ UraToken = UraTranslateToken (UraToken, UraTable, &TokenInfo);
+ if (UraToken == _UNUSED) {
+ return;
+ }
+
+ GnbUraProtocol->GnbUraGet (Device, &TokenInfo, Value);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Gnb Unified Register Access method
+ *
+ *
+ * @param[in] Device Standard configuration header
+ * @param[in] UraToken Ura token
+ * @param[in] Value Pointer to Context
+ */
+VOID
+GnbUraSet (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN UraToken,
+ IN VOID *Value
+ )
+{
+ AGESA_STATUS Status;
+ GNB_URA_SERVICE *GnbUraProtocol;
+ URA_TOKEN_INFO TokenInfo;
+ URA_ENTRY *UraTable;
+ UINT32 UraTableAddress;
+
+ Status = GnbLibLocateService (GnbUraService, GnbGetSocketId (Device->GnbHandle), (VOID **)&GnbUraProtocol, Device->StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ GnbUraProtocol->GnbUraLocateRegTbl (Device, &UraTableAddress);
+ UraTable = (URA_ENTRY *) ((UINTN)UraTableAddress);
+ UraToken = UraTranslateToken (UraToken, UraTable, &TokenInfo);
+ if (UraToken == _UNUSED) {
+ return;
+ }
+
+ GnbUraProtocol->GnbUraSet (Device, &TokenInfo, Value);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Gnb Unified Register Access method
+ *
+ *
+ * @param[in] Device Standard configuration header
+ * @param[in, out] UraTokenRegister Register token
+ * @param[in] UraTuple Pointer to Context
+ * @param[in, out] CombinedCount Token count
+ */
+VOID
+GnbUraCombinedGet (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN UraTokenRegister,
+ IN OUT URA_TUPLE *UraTuple,
+ IN UINT32 CombinedCount
+ )
+{
+ AGESA_STATUS Status;
+ GNB_URA_SERVICE *GnbUraProtocol;
+ URA_TOKEN_INFO TokenInfo;
+ URA_ENTRY *UraTable;
+ UINT32 UraTableAddress;
+ UINT32 RegValue;
+ UINT32 TempValue;
+ UINT32 FieldMask;
+ URA_TOKEN UraToken;
+ UINT32 Index;
+
+ Status = GnbLibLocateService (GnbUraService, GnbGetSocketId (Device->GnbHandle), (VOID **)&GnbUraProtocol, Device->StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ GnbUraProtocol->GnbUraLocateRegTbl (Device, &UraTableAddress);
+ UraTable = (URA_ENTRY *) ((UINTN)UraTableAddress);
+ UraTokenRegister = UraTranslateToken (UraTokenRegister, UraTable, &TokenInfo);
+ if (UraTokenRegister == _UNUSED) {
+ return;
+ }
+
+ GnbUraProtocol->GnbUraGet (Device, &TokenInfo, &RegValue);
+
+ Index = 0;
+ do {
+ UraToken = UraTuple[Index].Token;
+ UraToken = UraTranslateToken (UraToken, UraTable, &TokenInfo);
+ if (UraToken == _UNUSED) {
+ return;
+ }
+
+ TempValue = RegValue;
+ TempValue = TempValue >> TokenInfo.BfOffset;
+ FieldMask = (((UINT32)1 << TokenInfo.BfWidth) - 1);
+ UraTuple[Index].Value = TempValue & FieldMask;
+ Index++;
+ } while (Index < CombinedCount);
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Gnb Unified Register Access method
+ *
+ *
+ * @param[in] Device Standard configuration header
+ * @param[in, out] UraTokenRegister Register token
+ * @param[in] UraTuple Pointer to Context
+ * @param[in, out] CombinedCount Token count
+ */
+VOID
+GnbUraCombinedSet (
+ IN DEV_OBJECT *Device,
+ IN URA_TOKEN UraTokenRegister,
+ IN OUT URA_TUPLE *UraTuple,
+ IN UINT32 CombinedCount
+ )
+{
+ AGESA_STATUS Status;
+ GNB_URA_SERVICE *GnbUraProtocol;
+ URA_TOKEN_INFO TokenInfo;
+ URA_ENTRY *UraTable;
+ UINT32 UraTableAddress;
+ UINT32 RegValue;
+ UINT32 TempValue;
+ UINT32 FieldMask;
+ URA_TOKEN UraToken;
+ UINT32 Index;
+
+ Status = GnbLibLocateService (GnbUraService, GnbGetSocketId (Device->GnbHandle), (VOID **)&GnbUraProtocol, Device->StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+
+ GnbUraProtocol->GnbUraLocateRegTbl (Device, &UraTableAddress);
+ UraTable = (URA_ENTRY *) ((UINTN)UraTableAddress);
+ UraTokenRegister = UraTranslateToken (UraTokenRegister, UraTable, &TokenInfo);
+ if (UraTokenRegister == _UNUSED) {
+ return;
+ }
+
+ if (TokenInfo.StreamSet == 1) {
+ GnbUraProtocol->GnbUraStreamSet (Device, &TokenInfo, UraTuple, CombinedCount);
+ } else {
+ GnbUraProtocol->GnbUraGet (Device, &TokenInfo, &RegValue);
+
+ Index = 0;
+ do {
+ UraToken = UraTuple[Index].Token;
+ UraToken = UraTranslateToken (UraToken, UraTable, &TokenInfo);
+ if (UraToken == _UNUSED) {
+ return;
+ }
+ FieldMask = (((UINT32)1 << TokenInfo.BfWidth) - 1);
+ TempValue = UraTuple[Index].Value & FieldMask;
+ RegValue &= ~(FieldMask << TokenInfo.BfOffset);
+ RegValue |= TempValue << TokenInfo.BfOffset;
+ Index++;
+ } while (Index < CombinedCount);
+
+ UraTokenRegister = UraTranslateToken (UraTokenRegister, UraTable, &TokenInfo);
+ GnbUraProtocol->GnbUraSet (Device, &TokenInfo, &RegValue);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/Fam16/htNbFam16.c b/src/vendorcode/amd/agesa/f16kb/Proc/HT/Fam16/htNbFam16.c
new file mode 100644
index 0000000..0f782ed
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/Fam16/htNbFam16.c
@@ -0,0 +1,150 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * The initializer for Family 16h Model 00-0Fh northbridge support.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionsHt.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "CommonReturns.h"
+#include "htNbUtilitiesFam16.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_HT_FAM16_HTNBFAM16_FILECODE
+
+extern OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ *** FAMILY/NORTHBRIDGE SPECIFIC FUNCTIONS ***
+ ***************************************************************************/
+
+
+/**
+ * Initial construction data for no HT Northbridge.
+ */
+CONST NORTHBRIDGE ROMDATA HtFam16Nb =
+{
+ 1,
+ 1,
+ (PF_WRITE_ROUTING_TABLE)CommonVoid,
+ (PF_WRITE_NODEID)CommonVoid,
+ (PF_READ_DEFAULT_LINK)CommonReturnZero8,
+ (PF_ENABLE_ROUTING_TABLES)CommonVoid,
+ (PF_DISABLE_ROUTING_TABLES)CommonVoid,
+ (PF_VERIFY_LINK_IS_COHERENT)CommonReturnFalse,
+ (PF_READ_TOKEN)CommonReturnZero8,
+ (PF_WRITE_TOKEN)CommonVoid,
+ (PF_WRITE_FULL_ROUTING_TABLE)CommonVoid,
+ (PF_IS_ILLEGAL_TYPE_MIX)CommonReturnFalse,
+ (PF_IS_EXCEEDED_CAPABLE)CommonReturnFalse,
+ (PF_STOP_LINK)CommonVoid,
+ (PF_HANDLE_SPECIAL_LINK_CASE)CommonReturnFalse,
+ (PF_HANDLE_SPECIAL_NODE_CASE)CommonReturnFalse,
+ (PF_READ_SB_LINK)CommonReturnZero8,
+ (PF_VERIFY_LINK_IS_NON_COHERENT)CommonReturnFalse,
+ (PF_SET_CONFIG_ADDR_MAP)CommonVoid,
+ (PF_GET_CONFIG_ADDR_MAP)CommonVoid,
+ (PF_NORTH_BRIDGE_FREQ_MASK)CommonReturnZero32,
+ (PF_GATHER_LINK_FEATURES)CommonVoid,
+ (PF_SET_LINK_REGANG)CommonVoid,
+ (PF_SET_LINK_FREQUENCY)CommonVoid,
+ (PF_SET_LINK_UNITID_CLUMPING)CommonVoid,
+ (PF_WRITE_TRAFFIC_DISTRIBUTION)CommonVoid,
+ (PF_WRITE_LINK_PAIR_DISTRIBUTION)CommonVoid,
+ (PF_WRITE_VICTIM_DISTRIBUTION)CommonVoid,
+ (PF_BUFFER_OPTIMIZATIONS)CommonVoid,
+ Fam16GetNumCoresOnNode,
+ Fam16SetTotalCores,
+ Fam16GetNodeCount,
+ (PF_LIMIT_NODES)CommonVoid,
+ (PF_READ_TRUE_LINK_FAIL_STATUS)CommonReturnFalse,
+ (PF_GET_NEXT_LINK)CommonReturnZero32,
+ (PF_GET_PACKAGE_LINK)CommonReturnZero8,
+ (PF_MAKE_LINK_BASE)CommonReturnZero32,
+ (PF_GET_MODULE_INFO)CommonVoid,
+ (PF_POST_MAILBOX)CommonVoid,
+ (PF_RETRIEVE_MAILBOX)CommonReturnZero32,
+ (PF_GET_SOCKET)CommonReturnZero8,
+ Fam16GetEnabledComputeUnits,
+ Fam16GetDualcoreComputeUnits,
+ Fam16GetTriplecoreComputeUnits,
+ Fam16GetQuadcoreComputeUnits,
+ 0,
+ 0,
+ 0,
+ TRUE,
+ TRUE,
+ AMD_FAMILY_16,
+ NULL,
+ 0,
+ NULL,
+ (PF_MAKE_KEY)CommonReturnZero64,
+ NULL
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/Fam16/htNbUtilitiesFam16.c b/src/vendorcode/amd/agesa/f16kb/Proc/HT/Fam16/htNbUtilitiesFam16.c
new file mode 100644
index 0000000..5d761d4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/Fam16/htNbUtilitiesFam16.c
@@ -0,0 +1,300 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge utility routines.
+ *
+ * These routines are needed for support of more than one feature area.
+ * Collect them in this file so build options don't remove them.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "htNbUtilitiesFam16.h"
+#include "Filecode.h"
+#define FILECODE PROC_HT_FAM16_HTNBUTILITIESFAM16_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Write the total number of cores to the Node
+ *
+ * @HtNbMethod{::F_SET_TOTAL_NODES_AND_CORES}
+ *
+ * @param[in] Node the Node that will be examined
+ * @param[in] TotalNodes the total number of Nodes
+ * @param[in] TotalCores the total number of cores
+ * @param[in] Nb this northbridge
+ */
+VOID
+Fam16SetTotalCores (
+ IN UINT8 Node,
+ IN UINT8 TotalNodes,
+ IN UINT8 TotalCores,
+ IN NORTHBRIDGE *Nb
+ )
+{
+ PCI_ADDR NodeIDReg;
+ UINT32 Temp;
+
+ NodeIDReg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+ MakePciBusFromNode (Node),
+ MakePciDeviceFromNode (Node),
+ CPU_HTNB_FUNC_00,
+ REG_NODE_ID_0X60);
+
+ Temp = ((TotalCores - 1) & HTREG_NODE_CPUCNT_4_0);
+ LibAmdPciWriteBits (NodeIDReg, 20, 16, &Temp, Nb->ConfigHandle);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Return the number of cores (1 based count) on Node.
+ *
+ * @HtNbMethod{::F_GET_NUM_CORES_ON_NODE}
+ *
+ * @param[in] Node the Node that will be examined
+ * @param[in] Nb this northbridge
+ *
+ * @return the number of cores
+ */
+UINT8
+Fam16GetNumCoresOnNode (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ )
+{
+ UINT32 Result;
+ UINT32 Leveling;
+ UINT32 Cores;
+ UINT8 i;
+ PCI_ADDR Reg;
+
+ ASSERT ((Node < MAX_NODES));
+ // Read CmpCap
+ Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+ MakePciBusFromNode (Node),
+ MakePciDeviceFromNode (Node),
+ CPU_NB_FUNC_05,
+ REG_NB_CAPABILITY_2_5X84);
+
+ LibAmdPciReadBits (Reg, 7, 0, &Result, Nb->ConfigHandle);
+
+ // Support Downcoring
+ Cores = Result;
+ Cores++;
+ Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+ MakePciBusFromNode (Node),
+ MakePciDeviceFromNode (Node),
+ CPU_NB_FUNC_03,
+ REG_NB_DOWNCORE_3X190);
+ LibAmdPciReadBits (Reg, 31, 0, &Leveling, Nb->ConfigHandle);
+ for (i = 0; i < Cores; i++) {
+ if ((Leveling & ((UINT32) 1 << i)) != 0) {
+ Result--;
+ }
+ }
+ return (UINT8) (Result + 1);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the Count (1 based) of Nodes in the system.
+ *
+ * @HtNbMethod{::F_GET_NODE_COUNT}
+ *
+ * This is intended to support AP Core HT init, since the Discovery State data is not
+ * available (State->NodesDiscovered), there needs to be this way to find the number
+ * of Nodes, which is just one.
+ *
+ * @param[in] Nb this northbridge
+ *
+ * @return The number of nodes
+ */
+UINT8
+Fam16GetNodeCount (
+ IN NORTHBRIDGE *Nb
+ )
+{
+ ASSERT (Nb != NULL);
+ return (1);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the enable compute unit status for this node.
+ *
+ * @HtNbMethod{::F_GET_ENABLED_COMPUTE_UNITS}
+ *
+ * @param[in] Node The node for which we want the enabled compute units.
+ * @param[in] Nb Our Northbridge.
+ *
+ * @return The Enabled Compute Unit value
+ */
+UINT8
+Fam16GetEnabledComputeUnits (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ )
+{
+ UINT32 Enabled;
+ PCI_ADDR Reg;
+
+ ASSERT ((Node < MAX_NODES));
+
+ Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+ MakePciBusFromNode (Node),
+ MakePciDeviceFromNode (Node),
+ CPU_NB_FUNC_05,
+ REG_NB_COMPUTE_UNIT_5X80);
+ LibAmdPciReadBits (Reg, 3, 0, &Enabled, Nb->ConfigHandle);
+ return ((UINT8) Enabled);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the dual core compute unit status for this node.
+ *
+ * @HtNbMethod{::PF_GET_DUALCORE_COMPUTE_UNITS}
+ *
+ * @param[in] Node The node for which we want the dual core status
+ * @param[in] Nb Our Northbridge.
+ *
+ * @return The dual core compute unit status.
+ */
+UINT8
+Fam16GetDualcoreComputeUnits (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ )
+{
+ UINT32 Dual;
+ PCI_ADDR Reg;
+
+ ASSERT ((Node < MAX_NODES));
+
+ Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+ MakePciBusFromNode (Node),
+ MakePciDeviceFromNode (Node),
+ CPU_NB_FUNC_05,
+ REG_NB_COMPUTE_UNIT_5X80);
+ LibAmdPciReadBits (Reg, 19, 16, &Dual, Nb->ConfigHandle);
+ return ((UINT8) Dual);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the triple core compute unit status for this node.
+ *
+ * @HtNbMethod{::PF_GET_TRIPLECORE_COMPUTE_UNITS}
+ *
+ * @param[in] Node The node for which we want the triple core status
+ * @param[in] Nb Our Northbridge.
+ *
+ * @return The triple core compute unit status.
+ */
+UINT8
+Fam16GetTriplecoreComputeUnits (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ )
+{
+ UINT32 Triple;
+ PCI_ADDR Reg;
+
+ ASSERT ((Node < MAX_NODES));
+
+ Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+ MakePciBusFromNode (Node),
+ MakePciDeviceFromNode (Node),
+ CPU_NB_FUNC_05,
+ REG_NB_COMPUTE_UNIT_5X80);
+ LibAmdPciReadBits (Reg, 11, 8, &Triple, Nb->ConfigHandle);
+ return ((UINT8) Triple);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the quad core compute unit status for this node.
+ *
+ * @HtNbMethod{::PF_GET_QUADCORE_COMPUTE_UNITS}
+ *
+ * @param[in] Node The node for which we want the quad core status
+ * @param[in] Nb Our Northbridge.
+ *
+ * @return The quad core compute unit status.
+ */
+UINT8
+Fam16GetQuadcoreComputeUnits (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ )
+{
+ UINT32 Quad;
+ PCI_ADDR Reg;
+
+ ASSERT ((Node < MAX_NODES));
+
+ Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+ MakePciBusFromNode (Node),
+ MakePciDeviceFromNode (Node),
+ CPU_NB_FUNC_05,
+ REG_NB_COMPUTE_UNIT_5X80);
+ LibAmdPciReadBits (Reg, 27, 24, &Quad, Nb->ConfigHandle);
+ return ((UINT8) Quad);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/Fam16/htNbUtilitiesFam16.h b/src/vendorcode/amd/agesa/f16kb/Proc/HT/Fam16/htNbUtilitiesFam16.h
new file mode 100644
index 0000000..af6408c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/Fam16/htNbUtilitiesFam16.h
@@ -0,0 +1,110 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge utility routines.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_NB_UTILITIES_FAM16_H_
+#define _HT_NB_UTILITIES_FAM16_H_
+
+/**
+ * Return the number of cores (1 based count) on Node.
+ *
+ */
+UINT8
+Fam16GetNumCoresOnNode (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+
+UINT8
+Fam16GetNodeCount (
+ IN NORTHBRIDGE *Nb
+ );
+
+/**
+ * Get the enable compute unit status for this node.
+ */
+UINT8
+Fam16GetEnabledComputeUnits (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+
+/**
+ * Get the dual core compute unit status for this node.
+ */
+UINT8
+Fam16GetDualcoreComputeUnits (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+
+/**
+ * Get the triple core compute unit status for this node.
+ */
+UINT8
+Fam16GetTriplecoreComputeUnits (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+
+/**
+ * Get the quad core compute unit status for this node.
+ */
+UINT8
+Fam16GetQuadcoreComputeUnits (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+
+/**
+ * Write the total number of cores to the Node
+ *
+ */
+VOID
+Fam16SetTotalCores (
+ IN UINT8 Node,
+ IN UINT8 TotalNodes,
+ IN UINT8 TotalCores,
+ IN NORTHBRIDGE *Nb
+ );
+
+#endif // _HT_NB_UTILITIES_FAM15MOD1X_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htFeat.c b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htFeat.c
new file mode 100644
index 0000000..0807a41
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htFeat.c
@@ -0,0 +1,112 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HyperTransport features constructor.
+ *
+ * Initialize the set of available features.
+ * This file implements build options using conditional compilation.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionsHt.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "CommonReturns.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_HT_HTFEAT_FILECODE
+extern CONST OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+/**
+ * A no features Initializer.
+ */
+CONST HT_FEATURES ROMDATA HtFeaturesNone =
+{
+ (PF_COHERENT_DISCOVERY)CommonVoid,
+ (PF_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES)CommonVoid,
+ (PF_MAKE_HOP_COUNT_TABLE)CommonVoid,
+ (PF_ALLOCATE_BUS_NUMBERS)CommonVoid,
+ (PF_PROCESS_LINK)CommonVoid,
+ (PF_GATHER_LINK_DATA)CommonVoid,
+ (PF_SELECT_OPTIMAL_WIDTH_AND_FREQUENCY)CommonVoid,
+ (PF_REGANG_LINKS)CommonVoid,
+ (PF_SUBLINK_RATIO_FIXUP)CommonVoid,
+ (PF_IS_COHERENT_RETRY_FIXUP)CommonReturnFalse,
+ (PF_SET_LINK_DATA)CommonVoid,
+ (PF_TRAFFIC_DISTRIBUTION)CommonVoid,
+ (PF_SET_HT_CONTROL_REGISTER_BITS)CommonVoid,
+ (PF_CONVERT_WIDTH_TO_BITS)CommonReturnZero8
+};
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Provide the current Feature set implementation.
+ *
+ * Initialize using the installed initializer.
+ *
+ * @param[in] HtFeatures A feature object to initialize
+ * @param[in] StdHeader Opaque handle to standard config header
+*/
+VOID
+NewHtFeatures (
+ OUT HT_FEATURES *HtFeatures,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ LibAmdMemCopy (
+ (VOID *) HtFeatures,
+ (VOID *) OptionHtConfiguration.HtOptionInternalFeatures ,
+ (UINT32) (sizeof (HT_FEATURES)),
+ StdHeader
+ );
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htFeat.h b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htFeat.h
new file mode 100644
index 0000000..1801c62
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htFeat.h
@@ -0,0 +1,579 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HT Features.
+ *
+ * This file provides definitions used in common by HT internal modules. The
+ * data is private and not for external client access.
+ * Definitions include the HT global internal state data structures, and
+ * access to the available HT features from the main HT entry point.
+ *
+ * This file includes the feature constructor and feature support which is not
+ * removed with various build options.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_FEAT_H_
+#define _HT_FEAT_H_
+
+/**
+ * @page htimplfeat HT Features Implementation Guide
+ *
+ * HT Features provides access to the HT Feature set, in a manner that isolates
+ * calling code from knowledge about the Feature set implementation or which
+ * features are supported in the current build. In the case of feature sets, this
+ * is mostly used for build options to reduce code size by removing unneeded features.
+ *
+ * @par Adding a Method to HT Features
+ *
+ * To add a new method to the HT Features, follow these steps.
+ * <ul>
+ * <li> Create a typedef for the Method with the correct parameters and return type.
+ *
+ * <ul>
+ * <li> Name the method typedef (F_METHOD_NAME)(), where METHOD_NAME is the same name as the method table item,
+ * but with "_"'s and UPPERCASE, rather than mixed case.
+ * @n <tt> typedef VOID (F_METHOD_NAME)(); </tt> @n
+ *
+ * <li> Make a reference type for references to a method implementation:
+ * @n <tt> /// Reference to a Method </tt>
+ * @n <tt> typedef F_METHOD_NAME *PF_METHOD_NAME </tt> @n
+ * </ul>
+ *
+ * <li> Provide a standard doxygen function preamble for the Method typedef. Begin the
+ * detailed description by providing a reference to the method instances page by including
+ * the lines below:
+ * @code
+ * *
+ * * @HtFeatInstances.
+ * *
+ * @endcode
+ * @note It is important to provide documentation for the method type, because the method may not
+ * have an implementation in any families supported by the current package. @n
+ *
+ * <li> Add to the _HT_FEATURES struct an item for the Method:
+ * @n <tt> PF_METHOD_NAME MethodName; ///< Method: description. </tt> @n
+ * </ul>
+ *
+ * @par Implementing an HT Features Instance of the method.
+ *
+ * To implement an instance of a method for a specific feature follow these steps.
+ *
+ * - In appropriate files, implement the method with the return type and parameters
+ * matching the method typedef.
+ *
+ * - Name the function MethodName().
+ *
+ * - Create a doxygen function preamble for the method instance. Begin the detailed description with
+ * an Implements command to reference the method type and add this instance to the Method Instances page.
+ * @code
+ * *
+ * * @HtFeatMethod{::F_METHOD_NAME}.
+ * *
+ * @endcode
+ *
+ * - To access other Ht feature routines or data as part of the method implementation, the function
+ * must use HtFeatures->OtherMethod(). Do not directly access other HT feature
+ * routines, because in the table there may be overrides or this routine may be shared by multiple configurations.
+ *
+ * - Add the instance to the HT_FEATURES instances.
+ *
+ * - If a configuration does not need an instance of the method use one of the CommonReturns from
+ * CommonReturns.h with the same return type.
+ *
+ * @par Invoking HT Features Methods.
+ *
+ * The first step is carried out only once by the top level HT entry point.
+ * @n @code
+ * HT_FEATURES HtFeatures;
+ * // Get the current HT Feature Set
+ * NewHtFeatures (&HtFeatures);
+ * State->HtFeatures = &HtFeatures;
+ * @endcode
+ *
+ * The following example shows how to invoke a HT Features method.
+ * @n @code
+ * State->HtFeatures->MethodName ();
+ * @endcode
+ *
+ */
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define MAX_PLATFORM_LINKS 64
+#define MAX_LINK_PAIRS 4
+
+/* These following are internal definitions */
+#define ROUTE_TO_SELF 0x0F
+#define INVALID_LINK 0xCC /* Used in port list data structure to mark unused data entries.
+ Can also be used for no Link found in a port list search */
+
+/* definitions for working with the port list structure */
+#define PORTLIST_TYPE_CPU 0
+#define PORTLIST_TYPE_IO 1
+
+/*
+ * Hypertransport Capability definitions and macros
+ *
+ */
+
+#define HT_INTERFACE_CAP_SUBTYPE_MASK ((UINT32)0xE00000FFul)
+#define HT_CAP_SUBTYPE_MASK ((UINT32)0xF80000FFul)
+
+/* HT Host Capability */
+#define HT_HOST_CAPABILITY 1
+#define HT_HOST_CAP_SIZE 0x20
+
+/* Host CapabilityRegisters */
+#define HTHOST_LINK_CAPABILITY_REG 0x00
+#define HTHOST_LINK_CONTROL_REG 0x04
+#define HTHOST_FREQ_REV_REG 0x08
+#define HTHOST_REV_REV3 0x60
+#define HTHOST_FEATURE_CAP_REG 0x0C
+#define HTHOST_BUFFER_COUNT_REG 0x10
+#define HTHOST_ISOC_REG 0x14
+#define HTHOST_LINK_TYPE_REG 0x18
+#define HTHOST_FREQ_EXTENSION 0x1C
+#define HTHOST_TYPE_COHERENT 3
+#define HTHOST_TYPE_NONCOHERENT 7
+#define HTHOST_TYPE_MASK 0x1F
+
+/* HT Slave Capability (HT1 compat) */
+#define HT_SLAVE_CAPABILITY 0
+#define HTSLAVE_LINK01_OFFSET 4
+#define HTSLAVE_LINK_CONTROL_0_REG 4
+#define HTSLAVE_FREQ_REV_0_REG 0xC
+#define HTSLAVE_FEATURECAP_REG 0x10
+#define HT_CONTROL_CLEAR_CRC (~(3 << 8))
+#define HT_FREQUENCY_CLEAR_LINK_ERRORS (~(0x7 << 12))
+#define MAX_BUID 31
+
+/* HT3 gen Capability */
+#define HT_GEN3_CAPABILITY (0xD << 1)
+#define HTGEN3_LINK01_OFFSET 0x10
+#define HTGEN3_LINK_TRAINING_0_REG 0x10
+
+/* HT3 Retry Capability */
+#define HT_RETRY_CAPABILITY (0xC << 1)
+#define HTRETRY_CONTROL_REG 4
+
+/* Unit ID Clumping Capability */
+#define HT_UNITID_CAPABILITY (0x9 << 1)
+#define HTUNIT_SUPPORT_REG 4
+#define HTUNIT_ENABLE_REG 8
+#define HT_CLUMPING_PASSIVE 1
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+// Forward declarations.
+/// Used for forward reference.
+typedef struct _NORTHBRIDGE NORTHBRIDGE;
+/// Used for forward reference.
+typedef struct _HT_FEATURES HT_FEATURES;
+/// Used for forward reference.
+typedef struct _HT_INTERFACE HT_INTERFACE;
+
+/**
+ * Coherent Init Data.
+ *
+ * Metrics representing the coherent fabric which was discovered: Degree of nodes, adjacency,
+ * node numbering permutations, and the topology which it matched.
+ */
+typedef struct {
+ /** The number of coherent Links connected on each Node (the 'Degree' of the Node) */
+ UINT8 SysDegree[MAX_NODES];
+ /** The systems adjacency (sysMatrix[i][j] is true if Node_i has a Link to Node_j) */
+ BOOLEAN SysMatrix[MAX_NODES][MAX_NODES];
+
+ UINT8 DbDegree[MAX_NODES]; /**< Like sysDegree, but for the current database topology */
+ BOOLEAN DbMatrix[MAX_NODES][MAX_NODES]; /**< Like sysMatrix, but for the current database topology */
+
+ UINT8 Perm[MAX_NODES]; /**< The Node mapping from the system to the database */
+ UINT8 ReversePerm[MAX_NODES]; /**< The Node mapping from the database to the system */
+ UINT8 *MatchedTopology; /**< The topology that matched the current system or NULL */
+} COHERENT_FABRIC;
+
+/**
+ * Represent the system as Links of matched port pairs.
+ * A pair consists of a source Node, a Link to the destination Node, the
+ * destination Node, and its Link back to source Node. The even indices are
+ * the source Nodes and Links, and the odd indices are for the destination
+ * Nodes and Links.
+ * @note The Port pair 2*N and 2*N+1 are connected together to form a Link
+ * (e.g. 0,1 and 8,9 are ports on either end of an HT Link) The lower number
+ * port (2*N) is the source port. The device that owns the source port is
+ * always the device closer to the BSP. (i.e. nearer the CPU in a
+ * non-coherent chain, or the CPU with the lower NodeID).
+ */
+typedef struct {
+ /* This section is where the Link is in the system and how to find it */
+ UINT8 Type; /**< 0 = CPU, 1 = Device, all others reserved */
+ UINT8 Link; /**< 0-1 for devices, 0-7 for CPUs */
+ UINT8 NodeID; /**< The Node, or a pointer to the devices parent Node */
+ UINT8 HostLink; /**< For Devices, the root CPU's Link to the chain */
+ UINT8 HostDepth; /**< Link Depth in chain, only used by devices */
+ PCI_ADDR Pointer; /**< A pointer to the device's slave HT capability, so we don't have to keep searching */
+
+ /* This section is for the final settings, which are written to hardware */
+ BOOLEAN SelRegang; /**< Indicates to software regang Link, only used for CPU->CPU Links */
+ UINT8 SelWidthIn; /**< Width in setting */
+ UINT8 SelWidthOut; /**< Width out setting */
+ UINT8 SelFrequency; /**< Frequency setting */
+
+ /* This section is for keeping track of capabilities and possible configurations */
+ BOOLEAN RegangCap; /**< Is the port capable of reganging? CPUs only */
+ UINT32 PrvFrequencyCap; /**< Possible frequency settings */
+ UINT8 PrvWidthInCap; /**< Possible Width setting */
+ UINT8 PrvWidthOutCap; /**< Possible Width setting */
+ UINT32 CompositeFrequencyCap; /**< Possible Link frequency setting */
+ UINT32 ClumpingSupport; /**< Unit ID Clumping value (bit 0 = passive support) */
+} PORT_DESCRIPTOR;
+
+/// Reference to a set of PORT_DESCRIPTORs.
+typedef PORT_DESCRIPTOR (*PORT_LIST)[MAX_PLATFORM_LINKS*2];
+
+/**
+ * Our global state data structure
+ */
+typedef struct {
+ AMD_HT_INTERFACE *HtBlock; /**< The input data structure. */
+
+ UINT8 NodesDiscovered; /**< One less than the number of Nodes found in the system */
+ UINT8 TotalLinks; /**< How many HT Links have we discovered so far. */
+ UINT8 SysMpCap; /**< The maximum number of Nodes that all processors are capable of */
+ AGESA_STATUS MaxEventClass; /**< The event class of the highest severity event generated */
+
+ PORT_LIST PortList; /**< Represent the system as a set of Links, each two Ports. */
+ COHERENT_FABRIC *Fabric; /**< Describe metrics about the coherent fabric.
+ * Limited scope to CoherentInit(). */
+ /* Data interface to other Agesa Modules */
+ SOCKET_DIE_TO_NODE_MAP SocketDieToNodeMap; /**< For each Socket, Die the Node ids */
+ NODE_TO_SOCKET_DIE_MAP NodeToSocketDieMap; /**< For each Node id, Socket and Die */
+ HOP_COUNT_TABLE *HopCountTable; /**< Table of hops between nodes */
+
+ /* Data for non-coherent initialization */
+ UINT8 AutoBusCurrent; /**< The next bus number available */
+ UINT8 UsedCfgMapEntries; /**< The next Config address Map set available, Limit 4 (F1X[EC:E0]) */
+ BOOLEAN IsUsingRecoveryHt; /**< Manual BUID Swap List processing should assume that HT Recovery was used */
+ BOOLEAN IsSetHtCrcFlood; /**< Enable setting of HT CRC Flood */
+ BOOLEAN IsUsingUnitIdClumping; /**< Enable automatic Unit Id Clumping configuration. */
+
+ HT_INTERFACE *HtInterface; /**< Interface for feature code to external parameters */
+ HT_FEATURES *HtFeatures; /**< The current feature implementations */
+ NORTHBRIDGE *Nb; /**< The current northbridge */
+
+ PLATFORM_CONFIGURATION *PlatformConfiguration; /**< The platform specific configuration customizations */
+ VOID *ConfigHandle; /**< Config Pointer, opaque handle for passing to lib */
+} STATE_DATA;
+
+//
+// Feature Method types
+//
+
+/**
+ * Discover all coherent devices in the system.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out] State our global state
+ *
+ */
+typedef VOID F_COHERENT_DISCOVERY (
+ IN OUT STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_COHERENT_DISCOVERY *PF_COHERENT_DISCOVERY;
+
+/**
+ * Using the description of the fabric topology we discovered, try to find a match
+ * among the supported topologies.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out] State the discovered fabric, degree matrix, permutation
+ *
+ */
+typedef VOID F_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES (
+ IN OUT STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES *PF_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES;
+
+/**
+ * Make a Hop Count Table for the installed topology.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out] State access topology, permutation, update hop table
+ *
+ */
+typedef VOID F_MAKE_HOP_COUNT_TABLE (
+ IN OUT STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_MAKE_HOP_COUNT_TABLE *PF_MAKE_HOP_COUNT_TABLE;
+
+/**
+ * Allocate PCI Bus Numbers to an IO Link.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in] Node Node on which to allocate a bus range
+ * @param[in] Link The destination Link on that Node
+ * @param[in,out] State our global state
+ */
+typedef VOID F_ALLOCATE_BUS_NUMBERS (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN OUT STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_ALLOCATE_BUS_NUMBERS *PF_ALLOCATE_BUS_NUMBERS;
+
+/**
+ * Process a non-coherent Link.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in] Node Node on which to process nc init
+ * @param[in] Link The non-coherent Link on that Node
+ * @param[in] IsCompatChain Is this the chain with the southbridge? TRUE if yes.
+ * @param[in,out] State our global state
+ */
+typedef VOID F_PROCESS_LINK (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN BOOLEAN IsCompatChain,
+ IN OUT STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_PROCESS_LINK *PF_PROCESS_LINK;
+
+/**
+ * Get Link features into system data structure.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in] State our global state, port list
+ */
+typedef VOID F_GATHER_LINK_DATA (
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_GATHER_LINK_DATA *PF_GATHER_LINK_DATA;
+
+/**
+ * Optimize Links.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out] State Process and update portlist
+ */
+typedef VOID F_SELECT_OPTIMAL_WIDTH_AND_FREQUENCY (
+ IN OUT STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_SELECT_OPTIMAL_WIDTH_AND_FREQUENCY *PF_SELECT_OPTIMAL_WIDTH_AND_FREQUENCY;
+
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in] State our global state, port list
+ */
+typedef VOID F_SET_LINK_DATA (
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_SET_LINK_DATA *PF_SET_LINK_DATA;
+
+/**
+ * Retry must be enabled on all coherent links if it is enabled on any coherent links.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out] State global state, port frequency settings.
+ *
+ * @retval TRUE Fixup occurred, all coherent links HT1
+ * @retval FALSE No changes
+ */
+typedef BOOLEAN F_IS_COHERENT_RETRY_FIXUP (
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_IS_COHERENT_RETRY_FIXUP *PF_IS_COHERENT_RETRY_FIXUP;
+
+
+/**
+ * Test the subLinks of a Link to see if they qualify to be reganged.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out] State Our global state
+ */
+typedef VOID F_REGANG_LINKS (
+ IN OUT STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_REGANG_LINKS *PF_REGANG_LINKS;
+
+/**
+ * Iterate through all Links, checking the frequency of each subLink pair.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in,out] State Link state and port list
+ *
+ */
+typedef VOID F_SUBLINK_RATIO_FIXUP (
+ IN OUT STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_SUBLINK_RATIO_FIXUP *PF_SUBLINK_RATIO_FIXUP;
+
+/**
+ * Identify Links which can have traffic distribution.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in] State port list data
+ */
+typedef VOID F_TRAFFIC_DISTRIBUTION (
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_TRAFFIC_DISTRIBUTION *PF_TRAFFIC_DISTRIBUTION;
+
+/**
+ * Access HT Link Control Register.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in] Reg the PCI config address the control register
+ * @param[in] HiBit the high bit number
+ * @param[in] LoBit the low bit number
+ * @param[in] Value the value to write to that bit range. Bit 0 => loBit.
+ * @param[in] State Our state, config handle for lib
+ */
+typedef VOID F_SET_HT_CONTROL_REGISTER_BITS (
+ IN PCI_ADDR Reg,
+ IN UINT8 HiBit,
+ IN UINT8 LoBit,
+ IN UINT32 *Value,
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_SET_HT_CONTROL_REGISTER_BITS *PF_SET_HT_CONTROL_REGISTER_BITS;
+
+/**
+ * Translate a desired width setting to the bits to set in the register field.
+ *
+ * @HtFeatInstances.
+ *
+ * @param[in] Value the width Value
+ *
+ * @return The bits for the register
+ */
+typedef UINT8 F_CONVERT_WIDTH_TO_BITS (
+ IN UINT8 Value
+ );
+/// Reference to a method.
+typedef F_CONVERT_WIDTH_TO_BITS *PF_CONVERT_WIDTH_TO_BITS;
+
+/**
+ * HT Feature Methods.
+ *
+ * Provides abstract methods which are bound to specific feature implementations.
+ */
+struct _HT_FEATURES {
+ PF_COHERENT_DISCOVERY CoherentDiscovery; /**< Method: Coherent Discovery. */
+ PF_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES LookupComputeAndLoadRoutingTables;
+ /**< Method: Route the discovered system */
+ PF_MAKE_HOP_COUNT_TABLE MakeHopCountTable; /**< Method: Compute slit hop counts */
+ PF_ALLOCATE_BUS_NUMBERS AllocateBusNumbers; /**< Method: Allocate Bus Numbers to IO */
+ PF_PROCESS_LINK ProcessLink; /**< Method: Process a non-coherent Link. */
+ PF_GATHER_LINK_DATA GatherLinkData; /**< Method: Gather Link Capabilities and data. */
+ PF_SELECT_OPTIMAL_WIDTH_AND_FREQUENCY SelectOptimalWidthAndFrequency;
+ /**< Method: Optimize link features. */
+ PF_REGANG_LINKS RegangLinks; /**< Method: Regang Sublinks. */
+ PF_SUBLINK_RATIO_FIXUP SubLinkRatioFixup; /**< Method: Fix Sublink Frequency ratios */
+ PF_IS_COHERENT_RETRY_FIXUP IsCoherentRetryFixup;
+ /**< Method: Fix Retry mixed on coherent links. */
+ PF_SET_LINK_DATA SetLinkData; /**< Method: Set optimized values. */
+ PF_TRAFFIC_DISTRIBUTION TrafficDistribution; /**< Method: Detect and Initialize Traffic Distribution */
+ PF_SET_HT_CONTROL_REGISTER_BITS SetHtControlRegisterBits; /**< Method: Access HT Link Control Reg. */
+ PF_CONVERT_WIDTH_TO_BITS ConvertWidthToBits; /**< Method: Convert a bit width to the value used for register setting. */
+} ;
+
+/*----------------------------------------------------------------------------
+ * Prototypes
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Provide the current Feature set implementation.
+ *
+ * Add an implementation reference for the constructor, just to make sure the page is created.
+ * @HtFeatMethod{_HT_FEATURES}.
+ *
+ */
+VOID
+NewHtFeatures (
+ OUT HT_FEATURES *HtFeatures,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+#endif /* _HT_FEAT_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterface.c b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterface.c
new file mode 100644
index 0000000..7959665
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterface.c
@@ -0,0 +1,262 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * External Interface implementation.
+ *
+ * Contains routines for implementing the interface to the client BIOS.
+ * This file includes the interface access constructor.
+ * This file implements build options using conditional compilation.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "OptionsHt.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "CommonReturns.h"
+#include "htInterfaceGeneral.h"
+#include "htInterfaceCoherent.h"
+#include "htInterfaceNonCoherent.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_HT_HTINTERFACE_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern CONST OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * The default initializer for the HT internal interface, full features.
+ */
+CONST HT_INTERFACE ROMDATA HtInterfaceDefault =
+{
+ GetCpu2CpuPcbLimits,
+ GetSkipRegang,
+ NewHopCountTable,
+ GetOverrideBusNumbers,
+ GetManualBuidSwapList,
+ GetDeviceCapOverride,
+ GetIoPcbLimits,
+ GetSocketFromMap,
+ GetIgnoreLink,
+ PostMapToAp,
+ NewNodeAndSocketTables,
+ CleanMapsAfterError,
+ SetNodeToSocketMap,
+ GetMinNbCoreFreq
+};
+
+/**
+ * The initializer for the HT internal interface, coherent only features.
+ */
+CONST HT_INTERFACE ROMDATA HtInterfaceCoherentOnly =
+{
+ GetCpu2CpuPcbLimits,
+ GetSkipRegang,
+ NewHopCountTable,
+ GetOverrideBusNumbers,
+ (PF_GET_MANUAL_BUID_SWAP_LIST)CommonReturnFalse,
+ (PF_GET_DEVICE_CAP_OVERRIDE)CommonVoid,
+ (PF_GET_IO_PCB_LIMITS)CommonVoid,
+ GetSocketFromMap,
+ GetIgnoreLink,
+ PostMapToAp,
+ NewNodeAndSocketTables,
+ CleanMapsAfterError,
+ SetNodeToSocketMap,
+ GetMinNbCoreFreq
+};
+
+/**
+ * The non-coherent only build option initializer for the HT internal interface.
+ */
+CONST HT_INTERFACE ROMDATA HtInterfaceNonCoherentOnly =
+{
+ (PF_GET_CPU_2_CPU_PCB_LIMITS)CommonVoid,
+ (PF_GET_SKIP_REGANG)CommonReturnFalse,
+ (PF_NEW_HOP_COUNT_TABLE)CommonVoid,
+ GetOverrideBusNumbers,
+ GetManualBuidSwapList,
+ GetDeviceCapOverride,
+ GetIoPcbLimits,
+ GetSocketFromMap,
+ GetIgnoreLink,
+ PostMapToAp,
+ NewNodeAndSocketTables,
+ (PF_CLEAN_MAPS_AFTER_ERROR)CommonVoid,
+ SetNodeToSocketMap,
+ GetMinNbCoreFreq
+};
+
+/**
+ * Topology Maps only feature build option initializer for the HT internal interface.
+ */
+CONST HT_INTERFACE ROMDATA HtInterfaceMapsOnly =
+{
+ (PF_GET_CPU_2_CPU_PCB_LIMITS)CommonVoid,
+ (PF_GET_SKIP_REGANG)CommonReturnFalse,
+ (PF_NEW_HOP_COUNT_TABLE)CommonVoid,
+ (PF_GET_OVERRIDE_BUS_NUMBERS)CommonReturnFalse,
+ (PF_GET_MANUAL_BUID_SWAP_LIST)CommonReturnFalse,
+ (PF_GET_DEVICE_CAP_OVERRIDE)CommonVoid,
+ (PF_GET_IO_PCB_LIMITS)CommonVoid,
+ (PF_GET_SOCKET_FROM_MAP)CommonReturnZero8,
+ (PF_GET_IGNORE_LINK)CommonReturnFalse,
+ PostMapToAp,
+ NewNodeAndSocketTables,
+ (PF_CLEAN_MAPS_AFTER_ERROR)CommonVoid,
+ SetNodeToSocketMap,
+ (PF_GET_MIN_NB_CORE_FREQ)CommonReturnZero8
+};
+
+/**
+ * No features build option initializer for the HT internal interface.
+ */
+CONST HT_INTERFACE ROMDATA HtInterfaceNone =
+{
+ (PF_GET_CPU_2_CPU_PCB_LIMITS)CommonVoid,
+ (PF_GET_SKIP_REGANG)CommonReturnFalse,
+ (PF_NEW_HOP_COUNT_TABLE)CommonVoid,
+ (PF_GET_OVERRIDE_BUS_NUMBERS)CommonReturnFalse,
+ (PF_GET_MANUAL_BUID_SWAP_LIST)CommonReturnFalse,
+ (PF_GET_DEVICE_CAP_OVERRIDE)CommonVoid,
+ (PF_GET_IO_PCB_LIMITS)CommonVoid,
+ (PF_GET_SOCKET_FROM_MAP)CommonReturnZero8,
+ (PF_GET_IGNORE_LINK)CommonReturnFalse,
+ (PF_POST_MAP_TO_AP)CommonVoid,
+ (PF_NEW_NODE_AND_SOCKET_TABLES)CommonVoid,
+ (PF_CLEAN_MAPS_AFTER_ERROR)CommonVoid,
+ (PF_SET_NODE_TO_SOCKET_MAP)CommonVoid,
+ (PF_GET_MIN_NB_CORE_FREQ)CommonReturnZero8
+};
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * A constructor for the internal Ht Interface.
+ *
+ * The install has a reference to the initializer appropriate to the user selected build
+ * options. Use the selected initializer to construct the internal interface.
+ *
+ * @param[in,out] HtInterface Contains pointer to HT Interface structure to initialize.
+ * @param[in] StdHeader Opaque handle to standard config header
+ *
+*/
+VOID
+NewHtInterface (
+ OUT HT_INTERFACE *HtInterface,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ LibAmdMemCopy (
+ (VOID *) HtInterface,
+ (VOID *) OptionHtConfiguration.HtOptionInternalInterface,
+ (sizeof (HT_INTERFACE)),
+ StdHeader
+ );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * A "constructor" for the HyperTransport external interface.
+ *
+ * Sets inputs to valid, basic level, defaults.
+ *
+ * Copy the initial default values from the build options tables to the interface struct.
+ *
+ * @param[in] StdHeader Opaque handle to standard config header
+ * @param[in] AmdHtInterface HT Interface structure to initialize.
+ *
+ * @retval AGESA_SUCCESS Constructors are not allowed to fail
+*/
+AGESA_STATUS
+AmdHtInterfaceConstructor (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN AMD_HT_INTERFACE *AmdHtInterface
+ )
+{
+ LibAmdMemCopy (
+ (VOID *) AmdHtInterface,
+ (VOID *) OptionHtConfiguration.HtOptionPlatformDefaults,
+ (UINT32) (sizeof (AMD_HT_INTERFACE)),
+ StdHeader
+ );
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterface.h b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterface.h
new file mode 100644
index 0000000..1486aa6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterface.h
@@ -0,0 +1,489 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Internal access to HT Interface.
+ *
+ * This file provides definitions used by HT internal modules. The
+ * external HT interface (in agesa.h) is accessed using these methods.
+ * This keeps the HT Feature implementations abstracted from the HT
+ * interface.
+ *
+ * This file includes the interface access constructor and interface
+ * support which is not removed with various build options.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_INTERFACE_H_
+#define _HT_INTERFACE_H_
+
+/**
+ * @page htimplintf HT Internal Interface Implementation Guide
+ *
+ * HT Internal Interface provides access to the HT Component external interface (see AGESA.h),
+ * in a manner that isolates calling code from knowledge about the external interface or which
+ * interfaces are supported in the current build.
+ *
+ * @par Adding a Method to HT Internal Interface
+ *
+ * To add a new method to the HT Internal Interface, follow these steps.
+ * <ul>
+ * <li> Create a typedef for the Method with the correct parameters and return type.
+ *
+ * <ul>
+ * <li> Name the method typedef (F_METHOD_NAME)(), where METHOD_NAME is the same name as the method table item,
+ * but with "_"'s and UPPERCASE, rather than mixed case.
+ * @n <tt> typedef VOID (F_METHOD_NAME)(); </tt> @n
+ *
+ * <li> Make a reference type for references to a method implementation:
+ * @n <tt> /// Reference to a Method </tt>
+ * @n <tt> typedef F_METHOD_NAME *PF_METHOD_NAME </tt> @n
+ * </ul>
+ *
+ * <li> Provide a standard doxygen function preamble for the Method typedef. Begin the
+ * detailed description by providing a reference to the method instances page by including
+ * the lines below:
+ * @code
+ * *
+ * * @HtInterfaceInstances
+ * *
+ * @endcode
+ * @note It is important to provide documentation for the method type, because the method may not
+ * have an implementation in any families supported by the current package. @n
+ *
+ * <li> Add to the HT_INTERFACE struct an item for the Method:
+ * @n <tt> PF_METHOD_NAME MethodName; ///< Method: description. </tt> @n
+ * </ul>
+ *
+ * @par Implementing an HT Internal Interface Instance of the method.
+ *
+ * To implement an instance of a method for a specific interface follow these steps.
+ *
+ * - In appropriate files, implement the method with the return type and parameters
+ * matching the method typedef.
+ *
+ * - Name the function MethodName().
+ *
+ * - Create a doxygen function preamble for the method instance. Begin the detailed description with
+ * an Implements command to reference the method type and add this instance to the Method Instances page.
+ * @code
+ * *
+ * * @HtInterfaceMethod{::F_METHOD_NAME}.
+ * *
+ * @endcode
+ *
+ * - To access other Ht internal interface routines or data as part of the method implementation, the function
+ * must use HtInterface->OtherMethod(). Do not directly access other HT internal interface
+ * routines, because in the table there may be overrides or this routine may be shared by multiple families.
+ *
+ * - Add the instance to the HT_INTERFACE instances.
+ *
+ * - If a configuration does not need an instance of the method use one of the CommonReturns from
+ * CommonReturns.h with the same return type.
+ *
+ * @par Invoking HT Internal Interface Methods.
+ *
+ * The first step is carried out only once by the top level HT entry point.
+ * @n @code
+ * HT_INTERFACE HtInterface;
+ * // Get the current HT internal interface (to HtBlock data)
+ * NewHtInterface (&HtInterface);
+ * State->HtInterface = &HtInterface;
+ * @endcode
+ *
+ * The following example shows how to invoke a HT Internal Interface method.
+ * @n @code
+ * State->HtInterface->MethodName ();
+ * @endcode
+ *
+ */
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Get limits for CPU to CPU Links.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] NodeA One Node on which this Link is located
+ * @param[in] LinkA The Link on this Node
+ * @param[in] NodeB The other Node on which this Link is located
+ * @param[in] LinkB The Link on that Node
+ * @param[in,out] ABLinkWidthLimit modify to change the Link Width In
+ * @param[in,out] BALinkWidthLimit modify to change the Link Width Out
+ * @param[in,out] PcbFreqCap modify to change the Link's frequency capability
+ * @param[in] State the input data
+ *
+ */
+typedef VOID F_GET_CPU_2_CPU_PCB_LIMITS (
+ IN UINT8 NodeA,
+ IN UINT8 LinkA,
+ IN UINT8 NodeB,
+ IN UINT8 LinkB,
+ IN OUT UINT8 *ABLinkWidthLimit,
+ IN OUT UINT8 *BALinkWidthLimit,
+ IN OUT UINT32 *PcbFreqCap,
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_GET_CPU_2_CPU_PCB_LIMITS *PF_GET_CPU_2_CPU_PCB_LIMITS;
+
+/**
+ * Skip reganging of subLinks.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] NodeA One Node on which this Link is located
+ * @param[in] LinkA The Link on this Node
+ * @param[in] NodeB The other Node on which this Link is located
+ * @param[in] LinkB The Link on that Node
+ * @param[in] State the input data
+ *
+ * @retval MATCHED leave Link unganged
+ * @retval POWERED_OFF leave link unganged and power off the paired sublink
+ * @retval UNMATCHED regang Link automatically
+ */
+typedef FINAL_LINK_STATE F_GET_SKIP_REGANG (
+ IN UINT8 NodeA,
+ IN UINT8 LinkA,
+ IN UINT8 NodeB,
+ IN UINT8 LinkB,
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_GET_SKIP_REGANG *PF_GET_SKIP_REGANG;
+
+/**
+ * Manually control bus number assignment.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] Node The Node on which this chain is located
+ * @param[in] Link The Link on the host for this chain
+ * @param[out] SecBus Secondary Bus number for this non-coherent chain
+ * @param[out] SubBus Subordinate Bus number
+ * @param[in] State the input data
+ *
+ * @retval TRUE this routine is supplying the bus numbers
+ * @retval FALSE use auto Bus numbering
+ */
+typedef BOOLEAN F_GET_OVERRIDE_BUS_NUMBERS (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ OUT UINT8 *SecBus,
+ OUT UINT8 *SubBus,
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_GET_OVERRIDE_BUS_NUMBERS *PF_GET_OVERRIDE_BUS_NUMBERS;
+
+/**
+ * Get Manual BUID assignment list.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] Node The Node on which this chain is located
+ * @param[in] Link The Link on the host for this chain
+ * @param[out] List a pointer to a list, if returns TRUE
+ * @param[in] State the input data
+ *
+ * @retval TRUE use manual List
+ * @retval FALSE initialize the Link automatically. List not valid.
+ */
+typedef BOOLEAN F_GET_MANUAL_BUID_SWAP_LIST (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ OUT BUID_SWAP_LIST **List,
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_GET_MANUAL_BUID_SWAP_LIST *PF_GET_MANUAL_BUID_SWAP_LIST;
+
+/**
+ * Override capabilities of a device.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] HostNode The Node on which this chain is located
+ * @param[in] HostLink The Link on the host for this chain
+ * @param[in] Depth The Depth in the I/O chain from the Host
+ * @param[in] PciAddress The Device's PCI config address (for callout)
+ * @param[in] DevVenId The Device's PCI Vendor + Device ID (offset 0x00)
+ * @param[in] Revision The Device's PCI Revision
+ * @param[in] Link The Device's Link number (0 or 1)
+ * @param[in,out] LinkWidthIn modify to change the Link Width In
+ * @param[in,out] LinkWidthOut modify to change the Link Width Out
+ * @param[in,out] FreqCap modify to change the Link's frequency capability
+ * @param[in,out] Clumping modify to change unit id clumping capability
+ * @param[in] State the input data
+ *
+ */
+typedef VOID F_GET_DEVICE_CAP_OVERRIDE (
+ IN UINT8 HostNode,
+ IN UINT8 HostLink,
+ IN UINT8 Depth,
+ IN PCI_ADDR PciAddress,
+ IN UINT32 DevVenId,
+ IN UINT8 Revision,
+ IN UINT8 Link,
+ IN OUT UINT8 *LinkWidthIn,
+ IN OUT UINT8 *LinkWidthOut,
+ IN OUT UINT32 *FreqCap,
+ IN OUT UINT32 *Clumping,
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_GET_DEVICE_CAP_OVERRIDE *PF_GET_DEVICE_CAP_OVERRIDE;
+
+/**
+ * Get limits for non-coherent Links.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] HostNode The Node on which this Link is located
+ * @param[in] HostLink The Link about to be initialized
+ * @param[in] Depth The Depth in the I/O chain from the Host
+ * @param[in,out] DownstreamLinkWidthLimit modify to change the Link Width In
+ * @param[in,out] UpstreamLinkWidthLimit modify to change the Link Width Out
+ * @param[in,out] PcbFreqCap modify to change the Link's frequency capability
+ * @param[in] State the input data
+ */
+typedef VOID F_GET_IO_PCB_LIMITS (
+ IN UINT8 HostNode,
+ IN UINT8 HostLink,
+ IN UINT8 Depth,
+ IN OUT UINT8 *DownstreamLinkWidthLimit,
+ IN OUT UINT8 *UpstreamLinkWidthLimit,
+ IN OUT UINT32 *PcbFreqCap,
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_GET_IO_PCB_LIMITS *PF_GET_IO_PCB_LIMITS;
+
+/**
+ * Get the Socket number for a given Node number.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] Node Node discovered event data.
+ * @param[in] State reference to Node to socket map
+ *
+ * @return the socket id
+ *
+ */
+typedef UINT8 F_GET_SOCKET_FROM_MAP (
+ IN UINT8 Node,
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_GET_SOCKET_FROM_MAP *PF_GET_SOCKET_FROM_MAP;
+
+/**
+ * Ignore a Link.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] Node The Node on which this Link is located
+ * @param[in] Link The Link about to be initialized
+ * @param[in] NbList The northbridge default ignore link list
+ * @param[in] State the input data
+ *
+ * @retval MATCHED ignore this Link and skip it
+ * @retval POWERED_OFF ignore this link and power it off.
+ * @retval UNMATCHED initialize the Link normally
+ */
+typedef FINAL_LINK_STATE F_GET_IGNORE_LINK (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN IGNORE_LINK *NbIgnoreLinkList,
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_GET_IGNORE_LINK *PF_GET_IGNORE_LINK;
+
+/**
+ * Post Node id and other context info to AP cores via mailbox.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] State Our state
+ */
+typedef VOID F_POST_MAP_TO_AP (
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_POST_MAP_TO_AP *PF_POST_MAP_TO_AP;
+
+/**
+ * Clean up the map structures after severe event has caused a fall back to 1 node.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] State Our state
+ */
+typedef VOID F_CLEAN_MAPS_AFTER_ERROR (
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_CLEAN_MAPS_AFTER_ERROR *PF_CLEAN_MAPS_AFTER_ERROR;
+
+/**
+ * Get a new Socket Die to Node Map.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in,out] State global state
+ */
+typedef VOID F_NEW_NODE_AND_SOCKET_TABLES (
+ IN OUT STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_NEW_NODE_AND_SOCKET_TABLES *PF_NEW_NODE_AND_SOCKET_TABLES;
+
+/**
+ * Fill in the socket's Node id when a processor is discovered in that socket.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in] Node Node from which a new node was discovered
+ * @param[in] CurrentNodeModule The current node's module id in it's processor.
+ * @param[in] PackageLink The package level link from Node to NewNode.
+ * @param[in] NewNode The new node's id
+ * @param[in] HardwareSocket If we use the hardware method (preferred), this is the socket of new node.
+ * @param[in] Module The new node's module id in it's processor.
+ * @param[in] State our State
+ */
+typedef VOID F_SET_NODE_TO_SOCKET_MAP (
+ IN UINT8 Node,
+ IN UINT8 CurrentNodeModule,
+ IN UINT8 PackageLink,
+ IN UINT8 NewNode,
+ IN UINT8 HardwareSocket,
+ IN UINT8 Module,
+ IN STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_SET_NODE_TO_SOCKET_MAP *PF_SET_NODE_TO_SOCKET_MAP;
+
+/**
+ * Get a new, empty Hop Count Table, to make one for the installed topology.
+ *
+ * @HtInterfaceInstances.
+ *
+ * @param[in,out] State Keep our buffer handle.
+ *
+ */
+typedef VOID F_NEW_HOP_COUNT_TABLE (
+ IN OUT STATE_DATA *State
+ );
+/// Reference to a method.
+typedef F_NEW_HOP_COUNT_TABLE *PF_NEW_HOP_COUNT_TABLE;
+
+/**
+ * Get the minimum Northbridge frequency for the system.
+ *
+ * @HtInterfaceInstances.
+ *
+ * Invoke the CPU component power mgt interface.
+ *
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] StdHeader Config for library and services.
+ *
+ * @return Frequency in MHz.
+ *
+ */
+typedef UINT32 F_GET_MIN_NB_CORE_FREQ (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+/// Reference to a Method.
+typedef F_GET_MIN_NB_CORE_FREQ *PF_GET_MIN_NB_CORE_FREQ;
+
+/**
+ * The HT Interface, feature code uses these methods to get interface parameters.
+ */
+struct _HT_INTERFACE { // See Forward Declaration in HtFeates.h
+ PF_GET_CPU_2_CPU_PCB_LIMITS GetCpu2CpuPcbLimits; /**< Method: Get link limits for coherent links. */
+ PF_GET_SKIP_REGANG GetSkipRegang; /**< Method: Skip reganging for coherent links. */
+ PF_NEW_HOP_COUNT_TABLE NewHopCountTable; /**< Method: Get a new hop count table. */
+ PF_GET_OVERRIDE_BUS_NUMBERS GetOverrideBusNumbers; /**< Method: Control Bus number assignment. */
+ PF_GET_MANUAL_BUID_SWAP_LIST GetManualBuidSwapList; /**< Method: Assign device IDs. */
+ PF_GET_DEVICE_CAP_OVERRIDE GetDeviceCapOverride; /**< Method: Override Device capabilities. */
+ PF_GET_IO_PCB_LIMITS GetIoPcbLimits; /**< Method: Get link limits for noncoherent links. */
+ PF_GET_SOCKET_FROM_MAP GetSocketFromMap; /**< Method: Get the Socket for a node id. */
+ PF_GET_IGNORE_LINK GetIgnoreLink; /**< Method: Ignore a link. */
+ PF_POST_MAP_TO_AP PostMapToAp; /**< Method: Post Socket and other info to AP cores. */
+ PF_NEW_NODE_AND_SOCKET_TABLES NewNodeAndSocketTables; /**< Method: Get new socket and node maps. */
+ PF_CLEAN_MAPS_AFTER_ERROR CleanMapsAfterError; /**< Method: Clean up maps for forced 1P on error fall back. */
+ PF_SET_NODE_TO_SOCKET_MAP SetNodeToSocketMap; /**< Method: Associate a node id with a socket. */
+ PF_GET_MIN_NB_CORE_FREQ GetMinNbCoreFreq; /**< Method: Get the minimum northbridge frequency */
+} ;
+
+/*----------------------------------------------------------------------------
+ * Prototypes to Interface from Feature Code
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * A constructor for the internal Ht Interface.
+ *
+*/
+VOID
+NewHtInterface (
+ OUT HT_INTERFACE *HtInterface,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif /* _HT_INTERFACE_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceCoherent.c b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceCoherent.c
new file mode 100644
index 0000000..189fbb9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceCoherent.c
@@ -0,0 +1,263 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * External Interface implementation for coherent features.
+ *
+ * Contains routines for accessing the interface to the client BIOS,
+ * for support only required for coherent features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htInterfaceGeneral.h"
+#include "htInterfaceCoherent.h"
+#include "htNb.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_HT_HTINTERFACECOHERENT_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get limits for CPU to CPU Links.
+ *
+ * @HtInterfaceMethod{::F_GET_CPU_2_CPU_PCB_LIMITS}
+ *
+ * For each coherent connection this routine is called once. Update the frequency
+ * and width if needed for this Link (usually based on board restriction). This is
+ * used with CPU device capabilities and northbridge limits to compute the default
+ * settings. The input width and frequency are valid, but do not necessarily reflect
+ * the minimum setting that will be chosen.
+ *
+ * @param[in] NodeA One Node on which this Link is located
+ * @param[in] LinkA The Link on this Node
+ * @param[in] NodeB The other Node on which this Link is located
+ * @param[in] LinkB The Link on that Node
+ * @param[in,out] ABLinkWidthLimit modify to change the Link Width In
+ * @param[in,out] BALinkWidthLimit modify to change the Link Width Out
+ * @param[in,out] PcbFreqCap modify to change the Link's frequency capability
+ * @param[in] State the input data
+ *
+ */
+VOID
+GetCpu2CpuPcbLimits (
+ IN UINT8 NodeA,
+ IN UINT8 LinkA,
+ IN UINT8 NodeB,
+ IN UINT8 LinkB,
+ IN OUT UINT8 *ABLinkWidthLimit,
+ IN OUT UINT8 *BALinkWidthLimit,
+ IN OUT UINT32 *PcbFreqCap,
+ IN STATE_DATA *State
+ )
+{
+ CPU_TO_CPU_PCB_LIMITS *p;
+ UINT8 SocketA;
+ UINT8 SocketB;
+ UINT8 PackageLinkA;
+ UINT8 PackageLinkB;
+
+ ASSERT ((NodeA < MAX_NODES) && (NodeB < MAX_NODES));
+ ASSERT ((LinkA < State->Nb->MaxLinks) && (LinkB < State->Nb->MaxLinks));
+
+ SocketA = State->HtInterface->GetSocketFromMap (NodeA, State);
+ PackageLinkA = State->Nb->GetPackageLink (NodeA, LinkA, State->Nb);
+ SocketB = State->HtInterface->GetSocketFromMap (NodeB, State);
+ PackageLinkB = State->Nb->GetPackageLink (NodeB, LinkB, State->Nb);
+
+ if (State->HtBlock->CpuToCpuPcbLimitsList != NULL) {
+ p = State->HtBlock->CpuToCpuPcbLimitsList;
+
+ while (p->SocketA != HT_LIST_TERMINAL) {
+ if (((p->SocketA == SocketA) || (p->SocketA == HT_LIST_MATCH_ANY)) &&
+ ((p->LinkA == PackageLinkA) || ((p->LinkA == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLinkA))) ||
+ ((p->LinkA == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLinkA)))) &&
+ ((p->SocketB == SocketB) || (p->SocketB == HT_LIST_MATCH_ANY)) &&
+ ((p->LinkB == PackageLinkB) || ((p->LinkB == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLinkB))) ||
+ ((p->LinkB == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLinkB))))) {
+ // Found a match, update width and frequency
+ *ABLinkWidthLimit = p->ABLinkWidthLimit;
+ *BALinkWidthLimit = p->BALinkWidthLimit;
+ *PcbFreqCap = p->PcbFreqCap;
+ break;
+ } else {
+ p++;
+ }
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Skip reganging of subLinks.
+ *
+ * @HtInterfaceMethod{::F_GET_SKIP_REGANG}
+ *
+ * This routine is called whenever two subLinks are both connected to the same CPUs.
+ * Normally, unganged sublinks between the same two CPUs are reganged. Return true
+ * from this routine to leave the Links unganged.
+ *
+ * @param[in] NodeA One Node on which this Link is located
+ * @param[in] LinkA The Link on this Node
+ * @param[in] NodeB The other Node on which this Link is located
+ * @param[in] LinkB The Link on that Node
+ * @param[in] State the input data
+ *
+ * @retval MATCHED leave Link unganged
+ * @retval POWERED_OFF leave link unganged and power off the paired sublink
+ * @retval UNMATCHED regang Link automatically
+ */
+FINAL_LINK_STATE
+GetSkipRegang (
+ IN UINT8 NodeA,
+ IN UINT8 LinkA,
+ IN UINT8 NodeB,
+ IN UINT8 LinkB,
+ IN STATE_DATA *State
+ )
+{
+ SKIP_REGANG *p;
+ FINAL_LINK_STATE Result;
+ UINT8 SocketA;
+ UINT8 SocketB;
+ UINT8 PackageLinkA;
+ UINT8 PackageLinkB;
+
+ ASSERT ((NodeA < MAX_NODES) && (NodeB < MAX_NODES));
+ ASSERT ((LinkA < State->Nb->MaxLinks) && (LinkB < State->Nb->MaxLinks));
+
+ Result = UNMATCHED;
+ SocketA = State->HtInterface->GetSocketFromMap (NodeA, State);
+ PackageLinkA = State->Nb->GetPackageLink (NodeA, LinkA, State->Nb);
+ SocketB = State->HtInterface->GetSocketFromMap (NodeB, State);
+ PackageLinkB = State->Nb->GetPackageLink (NodeB, LinkB, State->Nb);
+
+ if (State->HtBlock->SkipRegangList != NULL) {
+ p = State->HtBlock->SkipRegangList;
+
+ while (p->SocketA != HT_LIST_TERMINAL) {
+ if (((p->SocketA == SocketA) || (p->SocketA == HT_LIST_MATCH_ANY)) &&
+ ((p->LinkA == PackageLinkA) || ((p->LinkA == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLinkA))) ||
+ ((p->LinkA == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLinkA)))) &&
+ ((p->SocketB == SocketB) || (p->SocketB == HT_LIST_MATCH_ANY)) &&
+ ((p->LinkB == PackageLinkB) || ((p->LinkB == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLinkB))) ||
+ ((p->LinkB == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLinkB))))) {
+ // Found a match return final link state
+ Result = p->LinkState;
+ break;
+ } else {
+ p++;
+ }
+ }
+ }
+ return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get a new, empty Hop Count Table, to make one for the installed topology.
+ *
+ * @HtInterfaceMethod{::F_NEW_HOP_COUNT_TABLE}
+ *
+ * For SLIT, publish a matrix with the hop count, by allocating a buffer on heap with a
+ * known signature.
+ *
+ * @param[in,out] State Keep our buffer handle.
+ *
+ */
+VOID
+NewHopCountTable (
+ IN OUT STATE_DATA *State
+ )
+{
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ AllocHeapParams.RequestedBufferSize = sizeof (HOP_COUNT_TABLE);
+ AllocHeapParams.BufferHandle = HOP_COUNT_TABLE_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer ( &AllocHeapParams, State->ConfigHandle) == AGESA_SUCCESS) {
+ State->HopCountTable = (HOP_COUNT_TABLE *)AllocHeapParams.BufferPtr;
+ } else {
+ State->HopCountTable = NULL;
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceCoherent.h b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceCoherent.h
new file mode 100644
index 0000000..2878e2f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceCoherent.h
@@ -0,0 +1,114 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Internal access to HT Interface for coherent features.
+ *
+ * This file provides definitions used by HT internal modules. The
+ * external HT interface (in agesa.h) is accessed using these methods.
+ * This keeps the HT Feature implementations abstracted from the HT
+ * interface.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_INTERFACE_COHERENT_H_
+#define _HT_INTERFACE_COHERENT_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * Prototypes to Interface from Feature Code
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Get limits for CPU to CPU Links.
+ *
+ */
+VOID
+GetCpu2CpuPcbLimits (
+ IN UINT8 NodeA,
+ IN UINT8 LinkA,
+ IN UINT8 NodeB,
+ IN UINT8 LinkB,
+ IN OUT UINT8 *ABLinkWidthLimit,
+ IN OUT UINT8 *BALinkWidthLimit,
+ IN OUT UINT32 *PcbFreqCap,
+ IN STATE_DATA *State
+ );
+
+/**
+ * Skip reganging of subLinks.
+ *
+ */
+FINAL_LINK_STATE
+GetSkipRegang (
+ IN UINT8 NodeA,
+ IN UINT8 LinkA,
+ IN UINT8 NodeB,
+ IN UINT8 LinkB,
+ IN STATE_DATA *State
+ );
+
+/**
+ * Get a new, empty Hop Count Table, to make one for the installed topology.
+ *
+ */
+VOID
+NewHopCountTable (
+ IN OUT STATE_DATA *State
+ );
+
+#endif /* _HT_INTERFACE_COHERENT_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceGeneral.c b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceGeneral.c
new file mode 100644
index 0000000..ab0ef1c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceGeneral.c
@@ -0,0 +1,538 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * External Interface implementation, general purpose features.
+ *
+ * Contains routines for implementing the interface to the client BIOS. This file
+ * includes the interface support which is not removed with various build options.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionMultiSocket.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htInterfaceGeneral.h"
+#include "htNb.h"
+#include "cpuServices.h"
+#include "cpuFeatures.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_HT_HTINTERFACEGENERAL_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration;
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Is PackageLink an Internal Link?
+ *
+ * This is a test for the logical link match codes in the user interface, not a test for
+ * the actual northbridge links.
+ *
+ * @param[in] PackageLink The link
+ *
+ * @retval TRUE This is an internal link
+ * @retval FALSE This is not an internal link
+ */
+BOOLEAN
+IsPackageLinkInternal (
+ IN UINT8 PackageLink
+ )
+{
+ return (BOOLEAN) ((PackageLink <= HT_LIST_MATCH_INTERNAL_LINK_2) && (PackageLink >= HT_LIST_MATCH_INTERNAL_LINK_0));
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Ignore a Link.
+ *
+ * @HtInterfaceMethod{::F_GET_IGNORE_LINK}
+ *
+ * This routine is called every time a coherent Link is found and then every time a
+ * non-coherent Link from a CPU is found. Any coherent or non-coherent Link from a
+ * CPU can be ignored and not used for discovery or initialization. Useful for
+ * connection based systems.
+ *
+ * @note not called for IO device to IO Device Links.
+ *
+ * @param[in] Node The Node on which this Link is located
+ * @param[in] Link The Link about to be initialized
+ * @param[in] NbIgnoreLinkList The northbridge default ignore link list
+ * @param[in] State the input data
+ *
+ * @retval MATCHED ignore this Link and skip it
+ * @retval POWERED_OFF ignore this link and power it off.
+ * @retval UNMATCHED initialize the Link normally
+ */
+FINAL_LINK_STATE
+GetIgnoreLink (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN IGNORE_LINK *NbIgnoreLinkList,
+ IN STATE_DATA *State
+ )
+{
+ IGNORE_LINK *p;
+ FINAL_LINK_STATE Result;
+ BOOLEAN IsFound;
+ UINT8 Socket;
+ UINT8 PackageLink;
+
+ ASSERT ((Node < MAX_NODES) && (Link < MAX_NODES));
+
+ Result = UNMATCHED;
+ IsFound = FALSE;
+ Socket = State->HtInterface->GetSocketFromMap (Node, State);
+ PackageLink = State->Nb->GetPackageLink (Node, Link, State->Nb);
+
+ if (State->HtBlock->IgnoreLinkList != NULL) {
+ p = State->HtBlock->IgnoreLinkList;
+ while (p->Socket != HT_LIST_TERMINAL) {
+ if (((p->Socket == Socket) || (p->Socket == HT_LIST_MATCH_ANY)) &&
+ ((p->Link == PackageLink) ||
+ ((p->Link == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLink))) ||
+ ((p->Link == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLink))))) {
+ // Found a match return the desired link state.
+ ASSERT (Result < MaxFinalLinkState);
+ Result = p->LinkState;
+ IsFound = TRUE;
+ break;
+ } else {
+ p++;
+ }
+ }
+ }
+ // If there wasn't a match in the user interface, see if the northbridge provides one.
+ if (!IsFound && (NbIgnoreLinkList != NULL)) {
+ p = NbIgnoreLinkList;
+ while (p->Socket != HT_LIST_TERMINAL) {
+ if (((p->Socket == Socket) || (p->Socket == HT_LIST_MATCH_ANY)) &&
+ ((p->Link == PackageLink) ||
+ ((p->Link == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLink))) ||
+ ((p->Link == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLink))))) {
+ // Found a match return the desired link state.
+ ASSERT (Result < MaxFinalLinkState);
+ Result = p->LinkState;
+ break;
+ } else {
+ p++;
+ }
+ }
+ }
+ return Result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the Socket number for a given Node number.
+ *
+ * @HtInterfaceMethod{::F_GET_SOCKET_FROM_MAP}
+ *
+ * Return the id.
+ *
+ * @param[in] Node The Node to translate
+ * @param[in] State reference to Node to socket map
+ *
+ * @return the socket id
+ *
+ */
+UINT8
+GetSocketFromMap (
+ IN UINT8 Node,
+ IN STATE_DATA *State
+ )
+{
+ UINT8 Socket;
+
+ ASSERT (State->NodeToSocketDieMap != NULL);
+
+ Socket = (*State->NodeToSocketDieMap)[Node].Socket;
+ return Socket;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get a new Socket Die to Node Map.
+ *
+ * @HtInterfaceMethod{::F_NEW_NODE_AND_SOCKET_TABLES}
+ *
+ * Put the Socket Die Table in heap with a known handle. Content will be generated as
+ * each node is discovered.
+ *
+ * @param[in,out] State global state
+ */
+VOID
+NewNodeAndSocketTables (
+ IN OUT STATE_DATA *State
+ )
+{
+ UINT8 i;
+ UINT8 j;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ // Allocate heap for the table
+ State->SocketDieToNodeMap = NULL;
+ AllocHeapParams.RequestedBufferSize = (((MAX_SOCKETS) * (MAX_DIES)) * sizeof (SOCKET_DIE_TO_NODE_ITEM));
+ AllocHeapParams.BufferHandle = SOCKET_DIE_MAP_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocHeapParams, State->ConfigHandle) == AGESA_SUCCESS) {
+ State->SocketDieToNodeMap = (SOCKET_DIE_TO_NODE_MAP)AllocHeapParams.BufferPtr;
+ // Initialize shared data structures
+ for (i = 0; i < MAX_SOCKETS; i++) {
+ for (j = 0; j < MAX_DIES; j++) {
+ (*State->SocketDieToNodeMap)[i][j].Node = HT_LIST_TERMINAL;
+ (*State->SocketDieToNodeMap)[i][j].LowCore = HT_LIST_TERMINAL;
+ (*State->SocketDieToNodeMap)[i][j].HighCore = HT_LIST_TERMINAL;
+ }
+ }
+ }
+ // Allocate heap for the table
+ State->NodeToSocketDieMap = NULL;
+ AllocHeapParams.RequestedBufferSize = (MAX_NODES * sizeof (NODE_TO_SOCKET_DIE_ITEM));
+ AllocHeapParams.BufferHandle = NODE_ID_MAP_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocHeapParams, State->ConfigHandle) == AGESA_SUCCESS) {
+ State->NodeToSocketDieMap = (NODE_TO_SOCKET_DIE_MAP)AllocHeapParams.BufferPtr;
+ // Initialize shared data structures
+ for (i = 0; i < MAX_NODES; i++) {
+ (*State->NodeToSocketDieMap)[i].Socket = HT_LIST_TERMINAL;
+ (*State->NodeToSocketDieMap)[i].Die = HT_LIST_TERMINAL;
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get the minimum Northbridge frequency for the system.
+ *
+ * @HtInterfaceMethod{::F_GET_MIN_NB_CORE_FREQ}
+ *
+ * Invoke the CPU component power mgt interface.
+ *
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] StdHeader Config for library and services.
+ *
+ * @return Frequency in MHz.
+ *
+ */
+UINT32
+GetMinNbCoreFreq (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 MinSysNbFreq;
+ UINT32 MinP0NbFreq;
+
+ OptionMultiSocketConfiguration.GetMinNbCof (PlatformConfig, &MinSysNbFreq, &MinP0NbFreq, StdHeader);
+
+ ASSERT (MinSysNbFreq != 0);
+
+ return MinSysNbFreq;
+}
+
+/**
+ * @page physicalsockethowto Physical Socket Map, How To Create
+ *
+ * To create a physical system socket map for a platform:
+ *
+ * - Start at the Node which will be the BSP.
+ *
+ * - Begin a breadth first enumeration of all the coherent Links between sockets
+ * by creating a socket structure for each socket connection from the BSP.
+ * For example, if the BSP is in socket zero and Link one connects to socket two,
+ * create socket {0, 1, 2}.
+ *
+ * - When all Links from the BSP are described, go to the first socket connected
+ * to the BSP and continue the breadth first enumeration.
+ *
+ * - It should not be necessary to describe the back Links; in the example above, there
+ * should be no need to create {2, 1, 0} (assuming socket two connects back to
+ * socket zero on its Link one).
+ *
+ * - When completed:
+ *
+ * - Every socket except the BSP's (usually zero) must be listed as a targetSocket,
+ * at least once. Some sockets may be listed more than once.
+ *
+ * - There usually should be at least as many entries as Links. An exception is a
+ * fully connected system, only the Links from the BSP are needed.
+ *
+ * - Every socket but the last one in the breadth first order should usually have one
+ * or more entries listing it as a currentSocket. (The last one has only back Links.)
+ *
+ * There are no strict assumptions about the ordering of the socket structures.
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Update maps between Sockets and Nodes for a specific newly discovered node.
+ *
+ * @HtInterfaceMethod{::F_SET_NODE_TO_SOCKET_MAP}
+ *
+ * There are two methods for providing socket naming of nodes.
+ *
+ * Hardware Method (preferred): A value strapped in hardware by the board is read and
+ * passed to this routine.
+ *
+ * Software Method: The current node's socket is looked up, since it was
+ * previously a new node and went through this process. The link is converted to
+ * a package level link. A user data structure describing the package level
+ * layout of the system is searched for the current node's socket and package link,
+ * and now we know the new node's socket.
+ *
+ * In either case, the Socket, Module to Node map and the Node to Socket, Module
+ * map are updated with the new node, socket, and module.
+ *
+ * Data needed to do this is passed in to the routine as arguments rather than read by this routine,
+ * so that it is not necessary to know a valid temporary route to either node at the time this code runs.
+ *
+ * @param[in] Node Node from which a new node was discovered
+ * @param[in] CurrentNodeModule The current node's module id in it's processor.
+ * @param[in] PackageLink The package link for the current node's link.
+ * @param[in] NewNode The new node's id
+ * @param[in] HardwareSocket If we use the hardware method (preferred), this is the socket of new node.
+ * @param[in] Module The new node's module id in it's processor.
+ * @param[in] State our State
+ */
+VOID
+SetNodeToSocketMap (
+ IN UINT8 Node,
+ IN UINT8 CurrentNodeModule,
+ IN UINT8 PackageLink,
+ IN UINT8 NewNode,
+ IN UINT8 HardwareSocket,
+ IN UINT8 Module,
+ IN STATE_DATA *State
+ )
+{
+ UINT8 SourceSocket;
+ UINT8 TargetSocket;
+ SYSTEM_PHYSICAL_SOCKET_MAP *Map;
+
+ // While this code could be written to recover from a NULL socket map, AGESA cannot function without one.
+ ASSERT (State->SocketDieToNodeMap != NULL);
+
+ if (State->HtBlock->SystemPhysicalSocketMap != NULL) {
+ if (NewNode != 0) {
+ // Find the logical Node from which a new Node was discovered in the Node field of
+ // some socket. It must already be there, Nodes are assigned ascending.
+ //
+ for (SourceSocket = 0; SourceSocket < MAX_SOCKETS; SourceSocket++) {
+ if ((*State->SocketDieToNodeMap)[SourceSocket][CurrentNodeModule].Node == Node) {
+ break;
+ }
+ }
+ // This ASSERT should be understood as "the Node did not have a match", not as a limit check on SourceSocket.
+ ASSERT (SourceSocket != MAX_SOCKETS);
+
+ // Find the sourceSocket in the CurrentSocket field, for the Link on which a new Node
+ // was discovered. When we find an entry with that socket and Link number, update the
+ // Node for that socket.
+ //
+ if (IsPackageLinkInternal (PackageLink)) {
+ // Internal Nodes are in the same socket, don't search the physical system map.
+ TargetSocket = SourceSocket;
+ } else {
+ // Find the target socket in the physical system map.
+ Map = State->HtBlock->SystemPhysicalSocketMap;
+ while ((Map->CurrentSocket != 0xFF) &&
+ ((Map->CurrentSocket != SourceSocket) || (Map->CurrentLink != PackageLink))) {
+ Map++;
+ }
+ ASSERT (Map->CurrentSocket != 0xFF);
+ TargetSocket = Map->TargetSocket;
+ }
+ } else {
+ // The BSP (BSN, if you will) has no predecessor node from which it is discovered.
+ TargetSocket = 0;
+ }
+ } else {
+ // Use the hardware method
+ // The hardware strapped socket id is passed to us in this case.
+ TargetSocket = HardwareSocket;
+ }
+ // If the target socket, module is already mapped to something, that's not good. Socket labeling conflict.
+ // Check that the board is strapped correctly. If not you need a SystemPhysicalSocketMap. If you have one,
+ // check it for correctness.
+ ASSERT ((*State->SocketDieToNodeMap)[TargetSocket][Module].Node == 0xFF);
+ // Update the map for the rest of agesa
+ (*State->SocketDieToNodeMap)[TargetSocket][Module].Node = NewNode;
+ // and the node to socket map
+ ASSERT (State->NodeToSocketDieMap != NULL);
+ (*State->NodeToSocketDieMap)[NewNode].Socket = TargetSocket;
+ (*State->NodeToSocketDieMap)[NewNode].Die = Module;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Clean up the map structures after severe event has caused a fall back to 1 node.
+ *
+ * @HtInterfaceMethod{::F_CLEAN_MAPS_AFTER_ERROR}
+ *
+ * @param[in] State Our state, access to socket, node maps
+ *
+ */
+VOID
+CleanMapsAfterError (
+ IN STATE_DATA *State
+ )
+{
+ UINTN Socket;
+ UINTN Module;
+ UINTN Node;
+
+ ASSERT (State->NodeToSocketDieMap != NULL);
+ ASSERT (State->SocketDieToNodeMap != NULL);
+
+ // Clear all the socket, module items except for the socket and module containing node zero.
+ for (Socket = 0; Socket < MAX_SOCKETS; Socket++) {
+ for (Module = 0; Module < MAX_DIES; Module++) {
+ if (((*State->NodeToSocketDieMap)[0].Socket != Socket) || ((*State->NodeToSocketDieMap)[0].Die != Module)) {
+ (*State->SocketDieToNodeMap)[Socket][Module].Node = HT_LIST_TERMINAL;
+ (*State->SocketDieToNodeMap)[Socket][Module].LowCore = HT_LIST_TERMINAL;
+ (*State->SocketDieToNodeMap)[Socket][Module].HighCore = HT_LIST_TERMINAL;
+ }
+ }
+ }
+ // Clear all the node items except for node zero.
+ for (Node = 1; Node < MAX_NODES; Node++) {
+ (*State->NodeToSocketDieMap)[Node].Socket = HT_LIST_TERMINAL;
+ (*State->NodeToSocketDieMap)[Node].Die = HT_LIST_TERMINAL;
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Post Node id and other context info to AP cores via mailbox.
+ *
+ * @HtInterfaceMethod{::F_POST_MAP_TO_AP}
+ *
+ * Since Ap's can not view map until after mp communication is established,
+ * provide them with initial context info via a mailbox register. A mailbox
+ * register is one that can be written in PCI space and read in MSR space.
+ *
+ * @param[in] State Our state, access to socket, node maps
+ */
+VOID
+PostMapToAp (
+ IN STATE_DATA *State
+ )
+{
+ UINT8 ModuleType;
+ UINT8 Module;
+ AP_MAILBOXES ApMailboxes[MAX_NODES];
+ UINT8 Node;
+ UINT32 Degree;
+ AGESA_STATUS CalledStatus;
+
+ // Dispatch any features (such as Preserve Mailbox) that need to run as soon as discovery is completed.
+ IDS_HDT_CONSOLE (CPU_TRACE, " Dispatch CPU features after HT discovery\n");
+ CalledStatus = DispatchCpuFeatures (CPU_FEAT_AFTER_COHERENT_DISCOVERY, State->PlatformConfiguration, State->ConfigHandle);
+
+ ASSERT (State->Fabric != NULL);
+ Degree = 0;
+ // Compute the degree of the system by finding the maximum degree of any node.
+ for (Node = 0; Node < (State->NodesDiscovered + 1); Node++) {
+ if (State->Fabric->SysDegree[Node] > Degree) {
+ Degree = State->Fabric->SysDegree[Node];
+ }
+ }
+ // Post the information on all nodes.
+ for (Node = 0; Node < (State->NodesDiscovered + 1); Node++) {
+ ModuleType = 0;
+ Module = 0;
+ State->Nb->GetModuleInfo (Node, &ModuleType, &Module, State->Nb);
+ ApMailboxes[Node].ApMailInfo.Info = 0;
+ ApMailboxes[Node].ApMailInfo.Fields.Node = Node;
+ ApMailboxes[Node].ApMailInfo.Fields.Socket = State->HtInterface->GetSocketFromMap (Node, State);
+ ApMailboxes[Node].ApMailInfo.Fields.ModuleType = ModuleType;
+ ApMailboxes[Node].ApMailInfo.Fields.Module = Module;
+ ApMailboxes[Node].ApMailExtInfo.Info = 0;
+ ApMailboxes[Node].ApMailExtInfo.Fields.SystemDegree = Degree;
+ // other fields of the extended info are used during ap init, and will be initialized at that time.
+ State->Nb->PostMailbox (Node, ApMailboxes[Node], State->Nb);
+ }
+ // Now that the mailboxes have been initialized, cache the info on the BSC. The APs
+ // will cache during heap initialization.
+ CacheBspMailbox (State->ConfigHandle, ApMailboxes, (State->NodesDiscovered + 1));
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceGeneral.h b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceGeneral.h
new file mode 100644
index 0000000..cfa27ca
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceGeneral.h
@@ -0,0 +1,161 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Internal access to HT Interface, general purpose features.
+ *
+ * This file provides definitions used by HT internal modules. The
+ * external HT interface (in agesa.h) is accessed using these methods.
+ * This keeps the HT Feature implementations abstracted from the HT
+ * external interface.
+ *
+ * This file includes the interface support which is not removed with
+ * various build options.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_INTERFACE_GENERAL_H_
+#define _HT_INTERFACE_GENERAL_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * Prototypes to Interface from Feature Code
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Is PackageLink an Internal Link?
+ */
+BOOLEAN
+IsPackageLinkInternal (
+ IN UINT8 PackageLink
+ );
+
+/**
+ * Get the Socket number for a given Node number.
+ *
+ */
+UINT8
+GetSocketFromMap (
+ IN UINT8 Node,
+ IN STATE_DATA *State
+ );
+
+/**
+ * Ignore a Link.
+ *
+ */
+FINAL_LINK_STATE
+GetIgnoreLink (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN IGNORE_LINK *NbIgnoreLinkList,
+ IN STATE_DATA *State
+ );
+
+/**
+ * Get a new Socket Die to Node Map.
+ *
+ */
+VOID
+NewNodeAndSocketTables (
+ IN OUT STATE_DATA *State
+ );
+
+/**
+ * Get the minimum Northbridge frequency for the system.
+ *
+ */
+UINT32
+GetMinNbCoreFreq (
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ * Fill in the socket's Node id when a processor is discovered in that socket.
+ *
+ */
+VOID
+SetNodeToSocketMap (
+ IN UINT8 Node,
+ IN UINT8 CurrentNodeModule,
+ IN UINT8 PackageLink,
+ IN UINT8 NewNode,
+ IN UINT8 HardwareSocket,
+ IN UINT8 Module,
+ IN STATE_DATA *State
+ );
+
+/**
+ * Clean up the map structures after severe event has caused a fall back to 1 node.
+ *
+ */
+VOID
+CleanMapsAfterError (
+ IN STATE_DATA *State
+ );
+
+/**
+ * Post Node id and other context info to AP cores via mailbox.
+ *
+ */
+VOID
+PostMapToAp (
+ IN STATE_DATA *State
+ );
+
+#endif /* _HT_INTERFACE_GENERAL_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceNonCoherent.c b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceNonCoherent.c
new file mode 100644
index 0000000..1c124d3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceNonCoherent.c
@@ -0,0 +1,393 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * External Interface implementation for non-coherent features.
+ *
+ * Contains routines for accessing the interface to the client BIOS,
+ * for non-coherent features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htInterfaceNonCoherent.h"
+#include "htNb.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_HT_HTINTERFACENONCOHERENT_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_ZERO_32 ((UINT32)0)
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get Manual BUID assignment list.
+ *
+ * @HtInterfaceMethod{::F_GET_MANUAL_BUID_SWAP_LIST}
+ *
+ * This routine is called every time a non-coherent chain is processed. BUID
+ * assignment may be controlled explicitly on a non-coherent chain. Swaps controls
+ * the BUID assignment and FinalIds provides the device to device Linking. Device
+ * orientation can be detected automatically, or explicitly. See documentation for
+ * more details.
+ *
+ * If a manual swap list is not supplied, automatic non-coherent init assigns BUIDs
+ * starting at 1 and incrementing sequentially based on each device's unit count.
+ *
+ * @param[in] Node The Node on which this chain is located
+ * @param[in] Link The Link on the host for this chain
+ * @param[out] List supply a pointer to a list.
+ * List is NOT valid unless routine returns TRUE.
+ * @param[in] State the input data
+ *
+ * @retval TRUE use a manual list
+ * @retval FALSE initialize the Link automatically
+ */
+BOOLEAN
+GetManualBuidSwapList (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ OUT BUID_SWAP_LIST **List,
+ IN STATE_DATA *State
+ )
+{
+ MANUAL_BUID_SWAP_LIST *p;
+ BOOLEAN result;
+ UINT8 Socket;
+ UINT8 PackageLink;
+
+ ASSERT ((Node < MAX_NODES) && (List != NULL));
+
+ result = FALSE;
+ Socket = State->HtInterface->GetSocketFromMap (Node, State);
+ PackageLink = State->Nb->GetPackageLink (Node, Link, State->Nb);
+
+ if (State->HtBlock->ManualBuidSwapList != NULL) {
+ p = State->HtBlock->ManualBuidSwapList;
+
+ while (p->Socket != HT_LIST_TERMINAL) {
+ if (((p->Socket == Socket) || (p->Socket == HT_LIST_MATCH_ANY)) &&
+ ((p->Link == PackageLink) || (p->Link == HT_LIST_MATCH_ANY))) {
+ // Found a match implies TRUE, ignore the Link
+ result = TRUE;
+ *List = &(p->SwapList);
+ break;
+ } else {
+ p++;
+ }
+ }
+ }
+ // List is not valid if Result is FALSE.
+ return result;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Override capabilities of a device.
+ *
+ * @HtInterfaceMethod{::F_GET_DEVICE_CAP_OVERRIDE}
+ *
+ * This routine is called once for every Link on every IO device. Update the width
+ * and frequency capability if needed for this device. This is used along with
+ * device capabilities, the limit call backs, and northbridge limits to compute the
+ * default settings. The components of the device's PCI config address are provided,
+ * so its settings can be consulted if need be. The input width and frequency are the
+ * reported device capabilities.
+ *
+ * @param[in] HostNode The Node on which this chain is located
+ * @param[in] HostLink The Link on the host for this chain
+ * @param[in] Depth The Depth in the I/O chain from the Host
+ * @param[in] PciAddress The Device's PCI config address (for callout)
+ * @param[in] DevVenId The Device's PCI Vendor + Device ID (offset 0x00)
+ * @param[in] Revision The Device's PCI Revision
+ * @param[in] Link The Device's Link number (0 or 1)
+ * @param[in,out] LinkWidthIn modify to change the Link Width In
+ * @param[in,out] LinkWidthOut modify to change the Link Width Out
+ * @param[in,out] FreqCap modify to change the Link's frequency capability
+ * @param[in,out] Clumping modify to change unit id clumping capability
+ * @param[in] State the input data and config header
+ *
+ */
+VOID
+GetDeviceCapOverride (
+ IN UINT8 HostNode,
+ IN UINT8 HostLink,
+ IN UINT8 Depth,
+ IN PCI_ADDR PciAddress,
+ IN UINT32 DevVenId,
+ IN UINT8 Revision,
+ IN UINT8 Link,
+ IN OUT UINT8 *LinkWidthIn,
+ IN OUT UINT8 *LinkWidthOut,
+ IN OUT UINT32 *FreqCap,
+ IN OUT UINT32 *Clumping,
+ IN STATE_DATA *State
+ )
+{
+ DEVICE_CAP_OVERRIDE *p;
+ UINT8 HostSocket;
+ UINT8 PackageLink;
+ DEVICE_CAP_CALLOUT_PARAMS CalloutParams;
+ AGESA_STATUS CalloutStatus;
+
+ ASSERT ((HostNode < MAX_NODES) && (Depth < 32) && ((Link == 0) || (Link == 1)));
+
+ HostSocket = State->HtInterface->GetSocketFromMap (HostNode, State);
+ PackageLink = State->Nb->GetPackageLink (HostNode, HostLink, State->Nb);
+
+ if (State->HtBlock->DeviceCapOverrideList != NULL) {
+ p = State->HtBlock->DeviceCapOverrideList;
+
+ while (p->HostSocket != HT_LIST_TERMINAL) {
+ if (((p->HostSocket == HostSocket) || (p->HostSocket == HT_LIST_MATCH_ANY)) &&
+ ((p->HostLink == PackageLink) || (p->HostLink == HT_LIST_MATCH_ANY)) &&
+ ((p->Depth == Depth) || (p->Depth == HT_LIST_MATCH_ANY)) &&
+ ((p->Link == Link) || (p->Link == HT_LIST_MATCH_ANY)) &&
+ // Found a potential match. Check the additional optional matches.
+ ((p->Options.IsCheckDevVenId == 0) || (p->DevVenId == DevVenId)) &&
+ ((p->Options.IsCheckRevision == 0) || (p->Revision == Revision))) {
+ //
+ // Found a match. Check what override actions are desired.
+ // Unlike the PCB limit routines, which handle the info returned,
+ // deviceCapOverride is actually overriding the settings, so we need
+ // to check that the field actually has an update.
+ // The Callout is a catch all for situations the data is not up to handling.
+ // It is expected, but not enforced, that either the data overrides are used,
+ // or the callout is used, rather than both.
+ //
+ if (p->Options.IsOverrideWidthIn != 0) {
+ *LinkWidthIn = p->LinkWidthIn;
+ }
+ if (p->Options.IsOverrideWidthOut != 0) {
+ *LinkWidthOut = p->LinkWidthOut;
+ }
+ if (p->Options.IsOverrideFreq != 0) {
+ *FreqCap = p->FreqCap;
+ }
+ if (p->Options.IsOverrideClumping != 0) {
+ *Clumping = p->Clumping;
+ }
+ if (p->Options.IsDoCallout != 0) {
+ //
+ // Pass the actual info being matched, not the matched struct data.
+ // This callout is expected to be built in as part of the options file, and does not use the
+ // callout interface, even though we use the consistent interface declaration for the routine.
+ // So, the first two int parameters have no meaning in this case.
+ // It is not meaningful for the callout to have any status but Success.
+ //
+ CalloutParams.HostSocket = HostSocket;
+ CalloutParams.HostLink = PackageLink;
+ CalloutParams.Depth = Depth;
+ CalloutParams.DevVenId = DevVenId;
+ CalloutParams.Revision = Revision;
+ CalloutParams.Link = Link;
+ CalloutParams.PciAddress = PciAddress;
+ CalloutParams.LinkWidthIn = LinkWidthIn;
+ CalloutParams.LinkWidthOut = LinkWidthOut;
+ CalloutParams.FreqCap = FreqCap;
+ CalloutParams.Clumping = Clumping;
+ CalloutParams.StdHeader = *((AMD_CONFIG_PARAMS *) (State->ConfigHandle));
+ CalloutStatus = p->Callout (UNUSED_ZERO_32, UNUSED_ZERO_32, (VOID *) &CalloutParams);
+ ASSERT (CalloutStatus == AGESA_SUCCESS);
+ }
+ break;
+ } else {
+ p++;
+ }
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Get limits for non-coherent Links.
+ *
+ * @HtInterfaceMethod{::F_GET_IO_PCB_LIMITS}
+ *
+ * For each non-coherent connection this routine is called once. Update the
+ * frequency and width if needed for this Link (usually based on board restriction).
+ * This is used with device capabilities, device overrides, and northbridge limits to
+ * compute the default settings. The input width and frequency are valid, but do not
+ * necessarily reflect the minimum setting that will be chosen.
+ *
+ * @param[in] HostNode The Node on which this Link is located
+ * @param[in] HostLink The Link about to be initialized
+ * @param[in] Depth The Depth in the I/O chain from the Host
+ * @param[in,out] DownstreamLinkWidthLimit modify to change the Link Width In
+ * @param[in,out] UpstreamLinkWidthLimit modify to change the Link Width Out
+ * @param[in,out] PcbFreqCap modify to change the Link's frequency capability
+ * @param[in] State the input data
+ */
+VOID
+GetIoPcbLimits (
+ IN UINT8 HostNode,
+ IN UINT8 HostLink,
+ IN UINT8 Depth,
+ IN OUT UINT8 *DownstreamLinkWidthLimit,
+ IN OUT UINT8 *UpstreamLinkWidthLimit,
+ IN OUT UINT32 *PcbFreqCap,
+ IN STATE_DATA *State
+ )
+{
+ IO_PCB_LIMITS *p;
+ UINT8 Socket;
+ UINT8 PackageLink;
+
+ ASSERT ((HostNode < MAX_NODES) && (HostLink < MAX_NODES));
+
+ Socket = State->HtInterface->GetSocketFromMap (HostNode, State);
+ PackageLink = State->Nb->GetPackageLink (HostNode, HostLink, State->Nb);
+
+ if (State->HtBlock->IoPcbLimitsList != NULL) {
+ p = State->HtBlock->IoPcbLimitsList;
+
+ while (p->HostSocket != HT_LIST_TERMINAL) {
+ if (((p->HostSocket == Socket) || (p->HostSocket == HT_LIST_MATCH_ANY)) &&
+ ((p->HostLink == PackageLink) || (p->HostLink == HT_LIST_MATCH_ANY)) &&
+ ((p->Depth == Depth) || (p->Depth == HT_LIST_MATCH_ANY))) {
+ // Found a match, return the override info
+ *DownstreamLinkWidthLimit = p->DownstreamLinkWidthLimit;
+ *UpstreamLinkWidthLimit = p->UpstreamLinkWidthLimit;
+ *PcbFreqCap = p->PcbFreqCap;
+ break;
+ } else {
+ p++;
+ }
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Manually control bus number assignment.
+ *
+ * @HtInterfaceMethod{::F_GET_OVERRIDE_BUS_NUMBERS}
+ *
+ * This routine is called every time a non-coherent chain is processed. If a system
+ * can not use the auto Bus numbering feature for non-coherent chain bus assignments,
+ * this routine can provide explicit control. For each chain, provide the bus number
+ * range to use.
+ *
+ * The outputs SecBus and SubBus are not valid unless this routine returns TRUE
+ *
+ * @param[in] Node The Node on which this chain is located
+ * @param[in] Link The Link on the host for this chain
+ * @param[out] SecBus Secondary Bus number for this non-coherent chain
+ * @param[out] SubBus Subordinate Bus number
+ * @param[in] State the input data
+ *
+ * @retval TRUE this routine is supplying the bus numbers.
+ * @retval FALSE use auto Bus numbering, bus outputs not valid.
+ */
+BOOLEAN
+GetOverrideBusNumbers (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ OUT UINT8 *SecBus,
+ OUT UINT8 *SubBus,
+ IN STATE_DATA *State
+ )
+{
+ OVERRIDE_BUS_NUMBERS *p;
+ BOOLEAN result;
+ UINT8 Socket;
+ UINT8 PackageLink;
+
+ ASSERT ((Node < MAX_NODES) && (Link < MAX_NODES));
+
+ result = FALSE;
+ Socket = State->HtInterface->GetSocketFromMap (Node, State);
+ PackageLink = State->Nb->GetPackageLink (Node, Link, State->Nb);
+
+ if (State->HtBlock->OverrideBusNumbersList != NULL) {
+ p = State->HtBlock->OverrideBusNumbersList;
+
+ while (p->Socket != HT_LIST_TERMINAL) {
+ if (((p->Socket == Socket) || (p->Socket == HT_LIST_MATCH_ANY)) &&
+ ((p->Link == PackageLink) || (p->Link == HT_LIST_MATCH_ANY))) {
+ // Found a match, return the bus overrides
+ *SecBus = p->SecBus;
+ *SubBus = p->SubBus;
+ ASSERT (*SubBus > *SecBus);
+ result = TRUE;
+ break;
+ } else {
+ p++;
+ }
+ }
+ }
+ // SecBus, SubBus are not valid if Result is FALSE.
+ return result;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceNonCoherent.h b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceNonCoherent.h
new file mode 100644
index 0000000..1f10f2f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htInterfaceNonCoherent.h
@@ -0,0 +1,137 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Internal access to HT Interface, for non-coherent features.
+ *
+ * This file provides definitions used by HT internal modules. The
+ * external HT interface (in agesa.h) is accessed using these methods.
+ * This keeps the HT Feature implementations abstracted from the HT
+ * interface.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_INTERFACE_NONCOHERENT_H_
+#define _HT_INTERFACE_NONCOHERENT_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * Prototypes to Interface from Feature Code
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Manually control bus number assignment.
+ *
+ */
+BOOLEAN
+GetOverrideBusNumbers (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ OUT UINT8 *SecBus,
+ OUT UINT8 *SubBus,
+ IN STATE_DATA *State
+ );
+
+/**
+ * Get Manual BUID assignment list.
+ *
+ */
+BOOLEAN
+GetManualBuidSwapList (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ OUT BUID_SWAP_LIST **List,
+ IN STATE_DATA *State
+ );
+
+/**
+ * Override capabilities of a device.
+ *
+ */
+
+VOID
+GetDeviceCapOverride (
+ IN UINT8 HostNode,
+ IN UINT8 HostLink,
+ IN UINT8 Depth,
+ IN PCI_ADDR PciAddress,
+ IN UINT32 DevVenId,
+ IN UINT8 Revision,
+ IN UINT8 Link,
+ IN OUT UINT8 *LinkWidthIn,
+ IN OUT UINT8 *LinkWidthOut,
+ IN OUT UINT32 *FreqCap,
+ IN OUT UINT32 *Clumping,
+ IN STATE_DATA *State
+ );
+
+/**
+ * Get limits for non-coherent Links.
+ *
+ */
+VOID
+GetIoPcbLimits (
+ IN UINT8 HostNode,
+ IN UINT8 HostLink,
+ IN UINT8 Depth,
+ IN OUT UINT8 *DownstreamLinkWidthLimit,
+ IN OUT UINT8 *UpstreamLinkWidthLimit,
+ IN OUT UINT32 *PcbFreqCap,
+ IN STATE_DATA *State
+ );
+
+#endif /* _HT_INTERFACE_NONCOHERENT_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htMain.c b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htMain.c
new file mode 100644
index 0000000..bbad241
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htMain.c
@@ -0,0 +1,589 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HyperTransport features and sequence implementation.
+ *
+ * Implements the external AmdHtInitialize entry point.
+ * Contains routines for directing the sequence of available features.
+ * Mostly, but not exclusively, AGESA_TESTPOINT invocations should be
+ * contained in this file, and not in the feature code.
+ *
+ * From a build option perspective, it may be that a few lines could be removed
+ * from compilation in this file for certain options. It is considered that
+ * the code savings from this are too small to be of concern and this file
+ * should not have any explicit build option implementation.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htInterface.h"
+#include "htNb.h"
+#include "heapManager.h"
+#include "cpuServices.h"
+#include "OptionsHt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_HT_HTMAIN_FILECODE
+#define APIC_Base_BSP 8
+#define APIC_Base 0x1b
+
+extern OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+BOOLEAN
+STATIC
+IsBootCore (
+ IN STATE_DATA *State
+ );
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Update maps with the core range for each module.
+ *
+ * Cores are numbered relative to a Processor, but sometimes there is a need to know the
+ * starting and ending core ids on a particular node. This same info is also useful for
+ * supporting the Core count on a node other than the one currently executing.
+ *
+ * For each Processor, get the core count of each node using the family specific PCI core count
+ * interface. The order of cores in a processor, and whether it is special for the BSP is family
+ * specific. But whether the processor orders core ids by module or node, iterate in the right
+ * order and use the counts to determine each start and end range.
+ *
+ * Update compute unit status for each node.
+ *
+ * @param[in] State number of Nodes discovered.
+*/
+VOID
+STATIC
+UpdateCoreRanges (
+ IN STATE_DATA *State
+ )
+{
+ UINT8 Node;
+ UINT8 ProcessorCores;
+ UINT8 ModuleCoreCount[MAX_DIES];
+ UINT8 Socket;
+ UINT8 Module;
+
+ ASSERT (State->SocketDieToNodeMap != NULL);
+ ASSERT (State->NodeToSocketDieMap != NULL);
+
+ for (Socket = 0; Socket < MAX_SOCKETS; Socket++) {
+ // Is a Processor present in Socket?
+ if ((*State->SocketDieToNodeMap)[Socket][0].Node != HT_LIST_TERMINAL) {
+ // Get all the Module core counts for this processor
+ // Note that the core counts are 1 based counts.
+ // Since Compute Unit info is not module ordering dependent, write it now.
+ for (Module = 0; Module < MAX_DIES; Module++) {
+ if ((*State->SocketDieToNodeMap)[Socket][Module].Node != HT_LIST_TERMINAL) {
+ ModuleCoreCount[Module] = State->Nb->GetNumCoresOnNode ((*State->SocketDieToNodeMap)[Socket][Module].Node, State->Nb);
+ (*State->SocketDieToNodeMap)[Socket][Module].EnabledComputeUnits =
+ State->Nb->GetEnabledComputeUnits ((*State->SocketDieToNodeMap)[Socket][Module].Node, State->Nb);
+ (*State->SocketDieToNodeMap)[Socket][Module].DualCoreComputeUnits =
+ State->Nb->GetDualCoreComputeUnits ((*State->SocketDieToNodeMap)[Socket][Module].Node, State->Nb);
+ (*State->SocketDieToNodeMap)[Socket][Module].TripleCoreComputeUnits =
+ State->Nb->GetTripleCoreComputeUnits ((*State->SocketDieToNodeMap)[Socket][Module].Node, State->Nb);
+ (*State->SocketDieToNodeMap)[Socket][Module].QuadCoreComputeUnits =
+ State->Nb->GetQuadCoreComputeUnits ((*State->SocketDieToNodeMap)[Socket][Module].Node, State->Nb);
+ } else {
+ ModuleCoreCount[Module] = 0;
+ }
+ }
+ // Determine the core ordering rule for this processor.
+ if ((((*State->NodeToSocketDieMap)[0].Socket == Socket) && State->Nb->IsOrderBSPCoresByNode) ||
+ (!State->Nb->IsOrderCoresByModule)) {
+ // Order core ranges on this processor by Node Id.
+ ProcessorCores = 0;
+ for (Node = 0; Node < State->Nb->GetNodeCount (State->Nb); Node++) {
+ // Is this node a module in this processor?
+ if ((*State->NodeToSocketDieMap)[Node].Socket == Socket) {
+ Module = (*State->NodeToSocketDieMap)[Node].Die;
+ if (ModuleCoreCount[Module] != 0) {
+ (*State->SocketDieToNodeMap)[Socket][Module].LowCore = ProcessorCores;
+ (*State->SocketDieToNodeMap)[Socket][Module].HighCore = ProcessorCores + (ModuleCoreCount[Module] - 1);
+ IDS_HDT_CONSOLE (
+ HT_TRACE,
+ (IsBootCore (State) ?
+ "Topology: Socket %d, Die %d, is Node %d, with Cores %d thru %d. Compute Unit status (0x%x,0x%x,0x%x,0x%x).\n" :
+ ""),
+ Socket,
+ Module,
+ Node,
+ (*State->SocketDieToNodeMap)[Socket][Module].LowCore,
+ (*State->SocketDieToNodeMap)[Socket][Module].HighCore,
+ (*State->SocketDieToNodeMap)[Socket][Module].EnabledComputeUnits,
+ (*State->SocketDieToNodeMap)[Socket][Module].DualCoreComputeUnits,
+ (*State->SocketDieToNodeMap)[Socket][Module].TripleCoreComputeUnits,
+ (*State->SocketDieToNodeMap)[Socket][Module].QuadCoreComputeUnits
+ );
+ ProcessorCores = ProcessorCores + ModuleCoreCount[Module];
+ }
+ }
+ }
+ } else {
+ // Order core ranges in this processor by Module Id.
+ ProcessorCores = 0;
+ for (Module = 0; Module < MAX_DIES; Module++) {
+ if (ModuleCoreCount[Module] != 0) {
+ (*State->SocketDieToNodeMap)[Socket][Module].LowCore = ProcessorCores;
+ (*State->SocketDieToNodeMap)[Socket][Module].HighCore = ProcessorCores + (ModuleCoreCount[Module] - 1);
+ IDS_HDT_CONSOLE (
+ HT_TRACE,
+ (IsBootCore (State) ?
+ "Topology: Socket %d, Die %d, is Node %d, with Cores %d thru %d. Compute Unit status (0x%x,0x%x,0x%x,0x%x).\n" :
+ ""),
+ Socket,
+ Module,
+ (*State->SocketDieToNodeMap)[Socket][Module].Node,
+ (*State->SocketDieToNodeMap)[Socket][Module].LowCore,
+ (*State->SocketDieToNodeMap)[Socket][Module].HighCore,
+ (*State->SocketDieToNodeMap)[Socket][Module].EnabledComputeUnits,
+ (*State->SocketDieToNodeMap)[Socket][Module].DualCoreComputeUnits,
+ (*State->SocketDieToNodeMap)[Socket][Module].TripleCoreComputeUnits,
+ (*State->SocketDieToNodeMap)[Socket][Module].QuadCoreComputeUnits
+ );
+ ProcessorCores = ProcessorCores + ModuleCoreCount[Module];
+ }
+ }
+ }
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Complete the coherent init with any system level initialization.
+ *
+ * Find the total number of cores and update the number of Nodes and cores in all cpus.
+ * Limit cpu config access to installed cpus.
+ *
+ * @param[in] State number of Nodes discovered.
+*/
+VOID
+STATIC
+FinalizeCoherentInit (
+ IN STATE_DATA *State
+ )
+{
+ UINT8 Node;
+ UINT8 TotalCores;
+
+ TotalCores = 0;
+
+ for (Node = 0; Node < (State->NodesDiscovered + 1); Node++) {
+ TotalCores = TotalCores + State->Nb->GetNumCoresOnNode (Node, State->Nb);
+ }
+
+ for (Node = 0; Node < (State->NodesDiscovered + 1); Node++) {
+ State->Nb->SetTotalNodesAndCores (Node, State->NodesDiscovered + 1, TotalCores, State->Nb);
+ }
+
+ // Set all nodes to limit config space based on node count, after all nodes have a valid count.
+ // (just being cautious, probably we could combine the loops.)
+ for (Node = 0; Node < (State->NodesDiscovered + 1); Node++) {
+ State->Nb->LimitNodes (Node, State->Nb);
+ }
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize the coherent fabric.
+ *
+ * Perform discovery and initialization of the coherent fabric, for builds including
+ * support for multiple coherent nodes.
+ *
+ * @param[in] State global state
+ */
+VOID
+STATIC
+CoherentInit (
+ IN OUT STATE_DATA *State
+ )
+{
+ UINT8 i;
+ UINT8 j;
+ UINT8 ModuleType;
+ UINT8 Module;
+ UINT8 HardwareSocket;
+ COHERENT_FABRIC Fabric;
+
+ // Because Node 0, the BSP, is not discovered, initialize info about it specially here.
+ // Allocate Socket Die Map.
+ // While the BSP is always capable of being the only processor in the system, call the
+ // IsExceededCapable method to make sure the BSP's capability is included in the aggregate system
+ // capability. We don't care to check the return value.
+ //
+ State->Fabric = &Fabric;
+ State->NodesDiscovered = 0;
+ State->TotalLinks = 0;
+ State->SysMpCap = MAX_NODES;
+ State->Nb->IsExceededCapable (0, State, State->Nb);
+ HardwareSocket = State->Nb->GetSocket (0, 0, State->Nb);
+ ModuleType = 0;
+ Module = 0;
+ State->Nb->GetModuleInfo (0, &ModuleType, &Module, State->Nb);
+ // No predecessor info for BSP, so pass 0xFF for those parameters.
+ State->HtInterface->SetNodeToSocketMap (0xFF, 0xFF, 0xFF, 0, HardwareSocket, Module, State);
+
+ // Initialize system state data structures
+ for (i = 0; i < MAX_NODES; i++) {
+ State->Fabric->SysDegree[i] = 0;
+ for (j = 0; j < MAX_NODES; j++) {
+ State->Fabric->SysMatrix[i][j] = 0;
+ }
+ }
+
+ //
+ // Call the coherent init features
+ //
+
+ // Discovery
+ State->HtFeatures->CoherentDiscovery (State);
+ State->HtInterface->PostMapToAp (State);
+ // Topology matching and Routing
+ AGESA_TESTPOINT (TpProcHtTopology, State->ConfigHandle);
+ State->HtFeatures->LookupComputeAndLoadRoutingTables (State);
+ State->HtFeatures->MakeHopCountTable (State);
+
+ // UpdateCoreRanges requires the other maps to be initialized, and the node count set.
+ FinalizeCoherentInit (State);
+ UpdateCoreRanges (State);
+ State->Fabric = NULL;
+}
+
+/***************************************************************************
+ *** Non-coherent init code ***
+ *** Algorithms ***
+ ***************************************************************************/
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize the non-coherent fabric.
+ *
+ * Begin with the Compat Link on the BSP, then find and initialize all other
+ * non-coherent chains.
+ *
+ * @param[in] State our global state
+ */
+VOID
+STATIC
+NcInit (
+ IN STATE_DATA *State
+ )
+{
+ UINT8 Node;
+ UINT8 Link;
+ UINT8 CompatLink;
+ FINAL_LINK_STATE FinalLinkState;
+
+ // Initialize the southbridge chain.
+ State->AutoBusCurrent = State->HtBlock->AutoBusStart;
+ State->UsedCfgMapEntries = 0;
+ CompatLink = State->Nb->ReadSouthbridgeLink (State->Nb);
+ State->HtFeatures->AllocateBusNumbers (0, CompatLink, State);
+ State->HtFeatures->ProcessLink (0, CompatLink, TRUE, State);
+
+ // Find and initialize all other non-coherent chains.
+ for (Node = 0; Node <= State->NodesDiscovered; Node++) {
+ for (Link = 0; Link < State->Nb->MaxLinks; Link++) {
+ // Skip the Link, if any of these tests indicate
+ FinalLinkState = State->HtInterface->GetIgnoreLink (Node, Link, State->Nb->DefaultIgnoreLinkList, State);
+ if (FinalLinkState == UNMATCHED) {
+ if ( !((Node == 0) && (Link == CompatLink))) {
+ if ( !(State->Nb->ReadTrueLinkFailStatus (Node, Link, State, State->Nb))) {
+ if (State->Nb->VerifyLinkIsNonCoherent (Node, Link, State->Nb)) {
+ State->HtFeatures->AllocateBusNumbers (Node, Link, State);
+ State->HtFeatures->ProcessLink (Node, Link, FALSE, State);
+ }
+ }
+ }
+ }
+ }
+ }
+}
+
+/***************************************************************************
+ *** Link Optimization ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Optimize Link Features.
+ *
+ * Based on Link capabilities, apply optimization rules to come up with the best
+ * settings, including several external limit decision from the interface. This includes
+ * handling of subLinks. Finally, after the port list data is updated, set the hardware
+ * state for all Links.
+ *
+ * @param[in] State our global state
+ */
+VOID
+STATIC
+LinkOptimization (
+ IN STATE_DATA *State
+ )
+{
+ AGESA_TESTPOINT (TpProcHtOptGather, State->ConfigHandle);
+ State->HtFeatures->GatherLinkData (State);
+
+ AGESA_TESTPOINT (TpProcHtOptRegang, State->ConfigHandle);
+ State->HtFeatures->RegangLinks (State);
+
+ AGESA_TESTPOINT (TpProcHtOptLinks, State->ConfigHandle);
+ State->HtFeatures->SelectOptimalWidthAndFrequency (State);
+
+ // A likely cause of mixed Retry settings on coherent links is sublink ratio balancing
+ // so check this after doing the sublinks.
+ AGESA_TESTPOINT (TpProcHtOptSubLinks, State->ConfigHandle);
+ State->HtFeatures->SubLinkRatioFixup (State);
+ if (State->HtFeatures->IsCoherentRetryFixup (State)) {
+ // Fix sublinks again within HT1 only frequencies, as ratios may be invalid again.
+ State->HtFeatures->SubLinkRatioFixup (State);
+ }
+
+ AGESA_TESTPOINT (TpProcHtOptFinish, State->ConfigHandle);
+ State->HtFeatures->SetLinkData (State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Handle system and performance tunings.
+ *
+ * Including traffic distribution, fifo and
+ * buffer tuning that can't be placed in the register table,
+ * and special config tunings.
+ *
+ * @param[in] State Total Nodes, port list data
+ */
+VOID
+STATIC
+Tuning (
+ IN STATE_DATA *State
+ )
+{
+ UINT8 Node;
+
+ // For each Node, invoke northbridge specific buffer tunings that can not be done in reg table.
+ //
+ AGESA_TESTPOINT (TpProcHtTuning, State->ConfigHandle);
+ for (Node = 0; Node < (State->NodesDiscovered + 1); Node++) {
+ State->Nb->BufferOptimizations (Node, State, State->Nb);
+ }
+
+ // See if traffic distribution can be done and do it if so.
+ //
+ AGESA_TESTPOINT (TpProcHtTrafficDist, State->ConfigHandle);
+ State->HtFeatures->TrafficDistribution (State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Initialize the Node and Socket maps for an AP Core.
+ *
+ * In each core's local heap, create a Node to Socket map and a Socket/Module to Node map.
+ * The mapping is filled in by reading the AP Mailboxes from PCI config on each node.
+ *
+ * @param[in] State global state, input data
+ *
+ */
+VOID
+STATIC
+InitApMaps (
+ IN STATE_DATA *State
+ )
+{
+ UINT8 Node;
+ AP_MAIL_INFO NodeApMailBox;
+
+ // There is no option to not have socket - node maps, if they aren't allocated that is a fatal bug.
+ ASSERT (State->SocketDieToNodeMap != NULL);
+ ASSERT (State->NodeToSocketDieMap != NULL);
+
+ for (Node = 0; Node < State->Nb->GetNodeCount (State->Nb); Node++) {
+ //NodeApMailBox = State->Nb->RetrieveMailbox (Node, State->Nb);
+ *(UINT32 *)(&NodeApMailBox) = 0;
+ (*State->SocketDieToNodeMap)[NodeApMailBox.Fields.Socket][NodeApMailBox.Fields.Module].Node = Node;
+ (*State->NodeToSocketDieMap)[Node].Socket = (UINT8)NodeApMailBox.Fields.Socket;
+ (*State->NodeToSocketDieMap)[Node].Die = (UINT8)NodeApMailBox.Fields.Module;
+ }
+ // This requires the other maps to be initialized.
+ UpdateCoreRanges (State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Is the currently running core the BSC?
+ *
+ * Determine whether the init steps for BSC or AP core should be run.
+ *
+ * @param[in] State global state, input data
+ *
+ * @retval TRUE This is the boot core.
+ * @retval FALSE This is not the boot core.
+ */
+BOOLEAN
+STATIC
+IsBootCore (
+ IN STATE_DATA *State
+ )
+{
+ UINT64 Value;
+
+ LibAmdMsrRead (APIC_Base, &Value, State->ConfigHandle);
+
+ return ((BOOLEAN) (((UINT32) (Value & 0xFFFFFFFF) & ((UINT32)1 << APIC_Base_BSP)) != 0));
+}
+
+/***************************************************************************
+ *** HT Initialize ***
+ ***************************************************************************/
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * The top level external interface for Hypertransport Initialization.
+ *
+ * Create our initial internal state, initialize the coherent fabric,
+ * initialize the non-coherent chains, and perform any required fabric tuning or
+ * optimization.
+ *
+ * @param[in] StdHeader Opaque handle to standard config header
+ * @param[in] PlatformConfiguration The platform configuration options.
+ * @param[in] AmdHtInterface HT Interface structure.
+ *
+ * @retval AGESA_SUCCESS Only information events logged.
+ * @retval AGESA_ALERT Sync Flood or CRC error logged.
+ * @retval AGESA_WARNING Example: expected capability not found
+ * @retval AGESA_ERROR logged events indicating some devices may not be available
+ * @retval AGESA_FATAL Mixed Family or MP capability mismatch
+ *
+ */
+AGESA_STATUS
+AmdHtInitialize (
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN PLATFORM_CONFIGURATION *PlatformConfiguration,
+ IN AMD_HT_INTERFACE *AmdHtInterface
+ )
+{
+ STATE_DATA State;
+ NORTHBRIDGE Nb;
+ HT_FEATURES HtFeatures;
+ HT_INTERFACE HtInterface;
+ AGESA_STATUS DeallocateStatus;
+ AP_MAIL_INFO ApMailboxInfo;
+ UINT8 ApNode;
+
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ State.HtBlock = AmdHtInterface;
+ State.ConfigHandle = StdHeader;
+ State.PlatformConfiguration = PlatformConfiguration;
+
+ // Get the current HT internal interface (to HtBlock data)
+ NewHtInterface (&HtInterface, State.ConfigHandle);
+ State.HtInterface = &HtInterface;
+
+ // Get the current HT Feature Set
+ NewHtFeatures (&HtFeatures, State.ConfigHandle);
+ State.HtFeatures = &HtFeatures;
+
+ // Initialize from static options
+ State.IsUsingRecoveryHt = OptionHtConfiguration.IsUsingRecoveryHt;
+ State.IsSetHtCrcFlood = OptionHtConfiguration.IsSetHtCrcFlood;
+ State.IsUsingUnitIdClumping = OptionHtConfiguration.IsUsingUnitIdClumping;
+
+ // Initialize for status and event output
+ State.MaxEventClass = AGESA_SUCCESS;
+
+ // Allocate permanent heap structs that are interfaces to other AGESA services.
+ State.HtInterface->NewNodeAndSocketTables (&State);
+
+ if (IsBootCore (&State)) {
+ AGESA_TESTPOINT (TpProcHtEntry, State.ConfigHandle);
+ // Allocate Bsp only interface heap structs.
+ State.HtInterface->NewHopCountTable (&State);
+ // Allocate heap for our temporary working space.
+ AllocHeapParams.RequestedBufferSize = (sizeof (PORT_DESCRIPTOR) * (MAX_PLATFORM_LINKS * 2));
+ AllocHeapParams.BufferHandle = HT_STATE_DATA_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, State.ConfigHandle) == AGESA_SUCCESS) {
+ State.PortList = (PORT_LIST)AllocHeapParams.BufferPtr;
+ // Create the BSP's northbridge.
+ NewNorthBridge (0, &State, &Nb);
+ State.Nb = &Nb;
+
+ CoherentInit (&State);
+ NcInit (&State);
+ LinkOptimization (&State);
+ Tuning (&State);
+
+ DeallocateStatus = HeapDeallocateBuffer (HT_STATE_DATA_HANDLE, State.ConfigHandle);
+ ASSERT (DeallocateStatus == AGESA_SUCCESS);
+ AGESA_TESTPOINT (TpProcHtDone, State.ConfigHandle);
+ } else {
+ ASSERT (FALSE);
+ State.MaxEventClass = AGESA_ERROR;
+ // Cannot Log entry due to heap allocate failed.
+ }
+ } else {
+ // Do the AP HT Init, which produces Node and Socket Maps for the AP's use.
+ AGESA_TESTPOINT (TpProcHtApMapEntry, State.ConfigHandle);
+ GetApMailbox (&ApMailboxInfo.Info, State.ConfigHandle);
+ ASSERT (ApMailboxInfo.Fields.Node < MAX_NODES);
+ ApNode = (UINT8)ApMailboxInfo.Fields.Node;
+ NewNorthBridge (ApNode, &State, &Nb);
+ State.Nb = &Nb;
+ InitApMaps (&State);
+ AGESA_TESTPOINT (TpProcHtApMapDone, State.ConfigHandle);
+ }
+ return State.MaxEventClass;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNb.c b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNb.c
new file mode 100644
index 0000000..293274a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNb.c
@@ -0,0 +1,251 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Construct a northbridge interface for a Node.
+ *
+ * Handle build options and run-time detection.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionsHt.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "htNbCommonHardware.h"
+#include "CommonReturns.h"
+#include "cpuRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuFamRegisters.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#include "Filecode.h"
+
+#define FILECODE PROC_HT_HTNB_FILECODE
+
+extern OPTION_HT_CONFIGURATION OptionHtConfiguration;
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/***************************************************************************
+ *** FAMILY/NORTHBRIDGE SPECIFIC FUNCTIONS ***
+ ***************************************************************************/
+
+
+/**
+ * Initial construction data for no HT Northbridge.
+ */
+CONST NORTHBRIDGE ROMDATA HtFam10NbNone =
+{
+ 1,
+ 1,
+ (PF_WRITE_ROUTING_TABLE)CommonVoid,
+ (PF_WRITE_NODEID)CommonVoid,
+ (PF_READ_DEFAULT_LINK)CommonReturnZero8,
+ (PF_ENABLE_ROUTING_TABLES)CommonVoid,
+ (PF_DISABLE_ROUTING_TABLES)CommonVoid,
+ (PF_VERIFY_LINK_IS_COHERENT)CommonReturnFalse,
+ (PF_READ_TOKEN)CommonReturnZero8,
+ (PF_WRITE_TOKEN)CommonVoid,
+ (PF_WRITE_FULL_ROUTING_TABLE)CommonVoid,
+ (PF_IS_ILLEGAL_TYPE_MIX)CommonReturnFalse,
+ (PF_IS_EXCEEDED_CAPABLE)CommonReturnFalse,
+ (PF_STOP_LINK)CommonVoid,
+ (PF_HANDLE_SPECIAL_LINK_CASE)CommonReturnFalse,
+ (PF_HANDLE_SPECIAL_NODE_CASE)CommonReturnFalse,
+ (PF_READ_SB_LINK)CommonReturnZero8,
+ (PF_VERIFY_LINK_IS_NON_COHERENT)CommonReturnFalse,
+ (PF_SET_CONFIG_ADDR_MAP)CommonVoid,
+ (PF_GET_CONFIG_ADDR_MAP)CommonVoid,
+ (PF_NORTH_BRIDGE_FREQ_MASK)CommonReturnZero32,
+ (PF_GATHER_LINK_FEATURES)CommonVoid,
+ (PF_SET_LINK_REGANG)CommonVoid,
+ (PF_SET_LINK_FREQUENCY)CommonVoid,
+ (PF_SET_LINK_UNITID_CLUMPING)CommonVoid,
+ (PF_WRITE_TRAFFIC_DISTRIBUTION)CommonVoid,
+ (PF_WRITE_LINK_PAIR_DISTRIBUTION)CommonVoid,
+ (PF_WRITE_VICTIM_DISTRIBUTION)CommonVoid,
+ (PF_BUFFER_OPTIMIZATIONS)CommonVoid,
+ (PF_GET_NUM_CORES_ON_NODE)CommonReturnZero8,
+ (PF_SET_TOTAL_NODES_AND_CORES)CommonVoid,
+ (PF_GET_NODE_COUNT)CommonReturnZero8,
+ (PF_LIMIT_NODES)CommonVoid,
+ (PF_READ_TRUE_LINK_FAIL_STATUS)CommonReturnFalse,
+ (PF_GET_NEXT_LINK)CommonReturnZero32,
+ (PF_GET_PACKAGE_LINK)CommonReturnZero8,
+ (PF_MAKE_LINK_BASE)CommonReturnZero32,
+ (PF_GET_MODULE_INFO)CommonVoid,
+ (PF_POST_MAILBOX)CommonVoid,
+ (PF_RETRIEVE_MAILBOX)CommonReturnZero32,
+ (PF_GET_SOCKET)CommonReturnZero8,
+ (PF_GET_ENABLED_COMPUTE_UNITS)CommonReturnZero8,
+ (PF_GET_DUALCORE_COMPUTE_UNITS)CommonReturnZero8,
+ (PF_GET_TRIPLECORE_COMPUTE_UNITS)CommonReturnZero8,
+ (PF_GET_QUADCORE_COMPUTE_UNITS)CommonReturnZero8,
+ 0,
+ 0,
+ 0,
+ TRUE,
+ TRUE,
+ 0,
+ NULL,
+ 0,
+ NULL,
+ (PF_MAKE_KEY)CommonReturnZero64,
+ NULL
+};
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Make a compatibility key.
+ *
+ * @HtNbMethod{::F_MAKE_KEY}
+ *
+ * Private routine to northbridge code.
+ * Create a key which can be used to determine whether a Node is compatible with
+ * the discovered configuration so far. Currently, that means the family,
+ * extended family of the new Node are the same as the BSP's. Family specific
+ * implementations can add whatever else is necessary.
+ *
+ * @param[in] Node the Node
+ * @param[in] Nb this northbridge
+ *
+ * @return the key
+ */
+UINT64
+MakeKey (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ )
+{
+ CPU_LOGICAL_ID LogicalId;
+ UINT32 RawCpuId;
+ PCI_ADDR Reg;
+
+ Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+ MakePciBusFromNode (Node),
+ MakePciDeviceFromNode (Node),
+ CPU_NB_FUNC_03,
+ REG_NB_CPUID_3XFC);
+
+ LibAmdPciReadBits (Reg, 31, 0, &RawCpuId, Nb->ConfigHandle);
+ GetLogicalIdFromCpuid (RawCpuId, &LogicalId, Nb->ConfigHandle);
+ return LogicalId.Family;
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Construct a new northbridge.
+ *
+ * This routine encapsulates knowledge of how to tell significant differences between
+ * families of supported northbridges and what routines can be used in common and
+ * which are unique. A fully populated northbridge interface is provided by Nb.
+ *
+ * @param[in] Node create a northbridge interface for this Node.
+ * @param[in] State global state
+ * @param[out] Nb the caller's northbridge structure to initialize.
+ */
+VOID
+NewNorthBridge (
+ IN UINT8 Node,
+ IN STATE_DATA *State,
+ OUT NORTHBRIDGE *Nb
+ )
+{
+ CPU_LOGICAL_ID LogicalId;
+ UINT64 Match;
+ UINT32 RawCpuId;
+ PCI_ADDR Reg;
+ NORTHBRIDGE **InitializerInstance;
+
+ // Start with enough of the key to identify the northbridge interface
+ Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (Node),
+ MakePciBusFromNode (Node),
+ MakePciDeviceFromNode (Node),
+ CPU_NB_FUNC_03,
+ REG_NB_CPUID_3XFC);
+ LibAmdPciReadBits (Reg, 31, 0, &RawCpuId, State->ConfigHandle);
+ IDS_HDT_CONSOLE (HT_TRACE, "AMD Processor at Node %d has raw CPUID=%x.\n", Node, RawCpuId);
+ GetLogicalIdFromCpuid (RawCpuId, &LogicalId, State->ConfigHandle);
+ Match = LogicalId.Family;
+
+ // Test each Northbridge interface in turn looking for a match.
+ // Use it to Init the Nb struct if a match is found.
+ //
+ ASSERT (OptionHtConfiguration.HtOptionFamilyNorthbridgeList != NULL);
+ InitializerInstance = (NORTHBRIDGE **) (OptionHtConfiguration.HtOptionFamilyNorthbridgeList);
+ while (*InitializerInstance != NULL) {
+ if ((Match & (*InitializerInstance)->CompatibleKey) != 0) {
+ LibAmdMemCopy ((VOID *)Nb, (VOID *)*InitializerInstance, (UINT32) sizeof (NORTHBRIDGE), State->ConfigHandle);
+ break;
+ }
+ InitializerInstance++;
+ }
+ // There must be an available northbridge implementation.
+ ASSERT (*InitializerInstance != NULL);
+
+ // Set the config handle for passing to the library.
+ Nb->ConfigHandle = State->ConfigHandle;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNb.h b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNb.h
new file mode 100644
index 0000000..d094da4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNb.h
@@ -0,0 +1,1200 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HT NorthBridge header
+ *
+ * Defines the interface to the HT NorthBridge module for use by other internal
+ * HT modules. This is not a wrapper or external interface, "public" in the
+ * comments below is used in the class definition style and refers to HT client
+ * modules only ("private" being for use only by the HT NB module itself).
+ *
+ * It is expected that there will be multiple northbridge implementation files all
+ * conforming to this common interface.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_NB_H_
+#define _HT_NB_H_
+
+/**
+ * @page htimplnb HT Northbridge Implementation Guide
+ *
+ * The HT Northbridge provides access to the Northbridge hardware, in a manner that
+ * isolates calling code from knowledge about the hardware implementation or which
+ * features are supported in the current build. This is the mechanism in the HT code for
+ * supporting new Family or Model northbridges, as well as the means for supporting
+ * multiple northbridges in a single build or mixed revision northbridge sets.
+ *
+ * @par Adding a Method to the Northbridge
+ *
+ * To add a new method to the Northbridge, follow these steps.
+ * <ul>
+ * <li> Create a typedef for the Method with the correct parameters and return type.
+ *
+ * <ul>
+ * <li> Name the method typedef (F_METHOD_NAME)(), where METHOD_NAME is the same
+ * name as the method table item, but with "_"'s and UPPERCASE, rather than mixed case.
+ * @n <tt> typedef VOID (F_METHOD_NAME)(); </tt> @n
+ *
+ * <li> Make a reference type for references to a method implementation:
+ * @n <tt> /// Reference to a Method </tt>
+ * @n <tt> typedef F_METHOD_NAME *PF_METHOD_NAME </tt> @n
+ * </ul>
+ *
+ * <li> One of the parameters to @b all northbridge Methods is @b required to be a
+ * reference to its current northbridge object. By convention, this is the
+ * last parameter.
+ *
+ * <li> Provide a standard doxygen function preamble for the Method typedef. Begin the
+ * detailed description by providing a reference to the method instances page by including
+ * the lines below:
+ * @code
+ * *
+ * * @HtNbInstances
+ * *
+ * @endcode
+ * @note It is important to provide documentation for the method type, because the method may not
+ * have an implementation in any families supported by the current package. @n
+ *
+ * <li> Add to the NORTHBRIDGE struct an item for the Method:
+ * @n <tt> PF_METHOD_NAME MethodName; ///< Method: description. </tt> @n
+ * </ul>
+ *
+ * @par Implementing an Instance of a Northbridge method.
+ *
+ * To implement an instance of a method for a specific feature follow these steps.
+ *
+ * - In appropriate files, implement the method with the return type and parameters
+ * matching the Method typedef.
+ * - If the Method implementation is common to all families, use the northbridge file
+ * for the function area, for example, add a new coherent initialization support method to the
+ * coherent northbridge file.
+ * - If the Method implementation is unique to each supported northbridge, use the
+ * family specific file for that function area (create it, if it doesn't already exist).
+ * The family specific files have the same name as the common one suffixed with "FamNN",
+ * or "FamNNRevX" if for a model or revision.
+ *
+ * - Name the function MethodName(). If Family specific, FamNNMethodName().
+ *
+ * - Create a doxygen function preamble for the method instance. Begin the detailed description with
+ * an Implements command to reference the method type and add this instance to the Method Instances page.
+ * @code
+ * *
+ * * @HtNbMethod{::F_METHOD_NAME}.
+ * *
+ * @endcode
+ *
+ * - To access other northbridge routines or data as part of the method implementation,
+ * the function must use Nb->OtherMethod(). Do not directly access other northbridge
+ * routines, because in the table there may be overrides or this routine may be shared by
+ * multiple configurations.
+ *
+ * - Add the instance, or the correct family specific instance, to the NORTHBRIDGE instances
+ * used by the northbridge constructor.
+ *
+ * - If a northbridge does not need an instance of the method use one of the CommonReturns from
+ * CommonReturns.h with the same return type.
+ *
+ * @par Making common Northbridge Methods.
+ *
+ * In some cases, Northbridge methods can easily have a common implementation because the hardware
+ * is very compatible or is even standard. In other cases, where processor family northbridges
+ * differ in their implementation, it may be possible to provide a single, common method
+ * implementation. This can be accomplished by adding Northbridge data members.
+ *
+ * For example, a bit position or bit field mask can be used to accommodate different bit placement or size.
+ * Another example, a small table can be used to translate index values from a common set
+ * to specific sets.
+ *
+ * The Northbridge Method Instance must use its NORTHBRIDGE reference parameter to access
+ * private data members.
+ *
+ * @par Invoking HT Northbridge Methods.
+ *
+ * Each unique northbridge is constructed based on matching the current northbridge.
+ * @n @code
+ * NORTHBRIDGE Nb;
+ * // Create the BSP's northbridge.
+ * NewNorthBridge (0, State, &Nb);
+ * State->Nb = &Nb;
+ * @endcode
+ *
+ * The following example shows how to invoke a Northbridge method.
+ * @n @code
+ * State->Nb->MethodName (State->Nb);
+ * @endcode
+ *
+ */
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/** Use a macro to convert a Node number to a PCI device. If some future port of
+ * this code needs to, this can easily be replaced by the function declaration:
+ * UINT8 makePCIDeviceFromNode(UINT8 Node);
+ */
+#define MakePciDeviceFromNode(Node) \
+ ((UINT8) (24 + (Node)))
+
+/** Use a macro to convert a Node number to a PCI bus. If some future port of
+ * this code needs to, this can easily be replaced by the function declaration:
+ * UINT8 MakePciBusFromNode(UINT8 Node);
+ */
+#define MakePciBusFromNode(Node) \
+ ((UINT8) (0))
+
+/** Use a macro to convert a Node number to a PCI Segment. If some future port of
+ * this code needs to, this can easily be replaced by the function declaration:
+ * UINT8 MakePciSegmentFromNode(UINT8 Node);
+ */
+#define MakePciSegmentFromNode(Node) \
+ ((UINT8) (0))
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/**
+ * Status for iterating through internal (if supported) and external links.
+ */
+typedef enum {
+ LinkIteratorEnd, ///< This is the end of all links, no valid link.
+ LinkIteratorExternal, ///< The next link (the one we got on this call) is an external link.
+ LinkIteratorInternal, ///< The next link (the one we got on this call) is an internal link.
+ LinkIteratorMax ///< For bounds checking and limit only.
+} LINK_ITERATOR_STATUS;
+
+#define LINK_ITERATOR_BEGIN 0xFF
+
+/**
+ * Write a temporary Route.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node The node on which to set a temporary route
+ * @param[in] Target A route to this node, which route table entry is to be set
+ * @param[in] Link The link which routes to the target node
+ * @param[in] Nb This northbridge
+ */
+typedef VOID F_WRITE_ROUTING_TABLE (
+ IN UINT8 Node,
+ IN UINT8 Target,
+ IN UINT8 Link,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_WRITE_ROUTING_TABLE *PF_WRITE_ROUTING_TABLE;
+
+/**
+ * Modifies the NodeID register on the target Node
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will have its NodeID altered.
+ * @param[in] NodeID the new value for NodeID
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_WRITE_NODEID (
+ IN UINT8 Node,
+ IN UINT8 NodeID,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_WRITE_NODEID *PF_WRITE_NODEID;
+
+/**
+ * Read the Default Link
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will have its NodeID altered.
+ * @param[in] Nb this northbridge
+ *
+ * @return The HyperTransport Link where the request to
+ * read the default Link came from. Since this code is running on the BSP,
+ * this should be the Link pointing back towards the BSP.
+ */
+typedef UINT8 F_READ_DEFAULT_LINK (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_READ_DEFAULT_LINK *PF_READ_DEFAULT_LINK;
+
+/**
+ * Turns routing tables on for a given Node
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will have it's routing tables enabled
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_ENABLE_ROUTING_TABLES (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_ENABLE_ROUTING_TABLES *PF_ENABLE_ROUTING_TABLES;
+
+/**
+ * Turns routing tables off for a given Node
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will have it's routing tables disabled
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_DISABLE_ROUTING_TABLES (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_DISABLE_ROUTING_TABLES *PF_DISABLE_ROUTING_TABLES;
+
+/**
+ * Verify that the Link is coherent, connected, and ready
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will be examined
+ * @param[in] Link the Link on that Node to examine
+ * @param[in] Nb this northbridge
+ *
+ * @retval TRUE The Link is coherent
+ * @retval FALSE The Link has some other status
+*/
+typedef BOOLEAN F_VERIFY_LINK_IS_COHERENT (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_VERIFY_LINK_IS_COHERENT *PF_VERIFY_LINK_IS_COHERENT;
+
+/**
+ * Read the token stored in the scratchpad register field.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will be examined
+ * @param[in] Nb this northbridge
+ *
+ * @return the Token read from the Node
+ */
+typedef UINT8 F_READ_TOKEN (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_READ_TOKEN *PF_READ_TOKEN;
+
+/**
+ * Write the token stored in the scratchpad register
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that marked with token
+ * @param[in] Value the token Value
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_WRITE_TOKEN (
+ IN UINT8 Node,
+ IN UINT8 Value,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_WRITE_TOKEN *PF_WRITE_TOKEN;
+
+/**
+ * Full Routing Table Register initialization
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will be examined
+ * @param[in] Target the Target Node for these routes
+ * @param[in] ReqLink the Link for requests to Target
+ * @param[in] RspLink the Link for responses to Target
+ * @param[in] BroadcastLinks the broadcast Links
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_WRITE_FULL_ROUTING_TABLE (
+ IN UINT8 Node,
+ IN UINT8 Target,
+ IN UINT8 ReqLink,
+ IN UINT8 RspLink,
+ IN UINT32 BroadcastLinks,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_WRITE_FULL_ROUTING_TABLE *PF_WRITE_FULL_ROUTING_TABLE;
+
+/**
+ * Determine whether a Node is compatible with the discovered configuration so far.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node
+ * @param[in] Nb this northbridge
+ *
+ * @retval TRUE the node is not compatible
+ * @retval FALSE the node is compatible
+ */
+typedef BOOLEAN F_IS_ILLEGAL_TYPE_MIX (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_IS_ILLEGAL_TYPE_MIX *PF_IS_ILLEGAL_TYPE_MIX;
+
+/**
+ * Return whether the current configuration exceeds the capability
+ * of the nodes detected.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node
+ * @param[in] State sysMpCap (updated) and NodesDiscovered
+ * @param[in] Nb this northbridge
+ *
+ * @retval TRUE system is not capable of current config.
+ * @retval FALSE system is capable of current config.
+ */
+typedef BOOLEAN F_IS_EXCEEDED_CAPABLE (
+ IN UINT8 Node,
+ IN STATE_DATA *State,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_IS_EXCEEDED_CAPABLE *PF_IS_EXCEEDED_CAPABLE;
+
+/**
+ * Stop a link, so that it is isolated from a connected device.
+ *
+ * @HtNbInstances
+ *
+ * Use is for fatal incompatible configurations.
+ * While XMIT and RCV off are HT standard, the use of these bits
+ * is generally family specific.
+ *
+ * @param[in] Node the node to stop a link on.
+ * @param[in] Link the link to stop.
+ * @param[in] State access to special routine for writing link control register
+ * @param[in] Nb this northbridge.
+ */
+typedef VOID F_STOP_LINK (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN STATE_DATA *State,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_STOP_LINK *PF_STOP_LINK;
+
+/**
+ * Fix (hopefully) exceptional conditions.
+ *
+ * @HtNbInstances
+ *
+ * This routine is expected to be unimplemented for most families.
+ * Some configurations may require that links be processed specially to prevent
+ * serious problems, like hangs. Check for that condition in this routine,
+ * handle the link both for hardware and for adding to port list, if appropriate.
+ * If this routine adds the link to port list or the link should not be added, return TRUE.
+ *
+ * @param[in] Node The Node which has this link
+ * @param[in] Link The link to check for special conditions.
+ * @param[in] State our global state.
+ * @param[in] Nb this northbridge.
+ *
+ * @retval TRUE This link received special handling.
+ * @retval FALSE This link was not handled specially, handle it normally.
+ *
+ */
+typedef BOOLEAN F_HANDLE_SPECIAL_LINK_CASE (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN STATE_DATA *State,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_HANDLE_SPECIAL_LINK_CASE *PF_HANDLE_SPECIAL_LINK_CASE;
+
+/**
+ * Fix (hopefully) exceptional conditions.
+ *
+ * @HtNbInstances
+ *
+ * This routine is expected to be unimplemented for most families.
+ * Some configurations may require that nodes be processed specially to prevent
+ * serious problems, like hangs. Check for that condition in this routine,
+ * handle the node both for hardware and for adding to port list, if appropriate.
+ * If this routine adds the node to port list or the node should not be added, return TRUE.
+ *
+ * @param[in] Node The Node which need to be checked.
+ * @param[in] Link The link to check for special conditions.
+ * @param[in] State our global state.
+ * @param[in] Nb this northbridge.
+ *
+ * @retval TRUE This node received special handling.
+ * @retval FALSE This node was not handled specially, handle it normally.
+ *
+ */
+typedef BOOLEAN F_HANDLE_SPECIAL_NODE_CASE (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN STATE_DATA *State,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_HANDLE_SPECIAL_NODE_CASE *PF_HANDLE_SPECIAL_NODE_CASE;
+
+/**
+ * Get Info about Module Type of this northbridge
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node
+ * @param[out] ModuleType 0 for Single, 1 for Multi
+ * @param[out] Module The module number of this node (0 if Single)
+ * @param[in] Nb this northbridge
+ *
+ */
+typedef VOID F_GET_MODULE_INFO (
+ IN UINT8 Node,
+ OUT UINT8 *ModuleType,
+ OUT UINT8 *Module,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_GET_MODULE_INFO *PF_GET_MODULE_INFO;
+
+/**
+ * Post info to AP cores via a mailbox.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node
+ * @param[in] ApMailInfo The info to post
+ * @param[in] Nb this northbridge
+ *
+ */
+typedef VOID F_POST_MAILBOX (
+ IN UINT8 Node,
+ IN AP_MAILBOXES ApMailInfo,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_POST_MAILBOX *PF_POST_MAILBOX;
+
+/**
+ * Retrieve info from a node's AP mailbox.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node
+ * @param[in] ApMailInfo The info to post
+ * @param[in] Nb this northbridge
+ *
+ */
+typedef AP_MAIL_INFO F_RETRIEVE_MAILBOX (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_RETRIEVE_MAILBOX *PF_RETRIEVE_MAILBOX;
+
+/**
+ * Implement the hardware method of doing Socket Naming, by accessing this northbridge's Socket Id register.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node The node for which we want the socket id.
+ * @param[in] TempNode The temporary node id route where the node can be accessed.
+ * @param[in] Nb Our Northbridge.
+ *
+ * @return The Socket Id
+ */
+typedef UINT8 F_GET_SOCKET (
+ IN UINT8 Node,
+ IN UINT8 TempNode,
+ IN NORTHBRIDGE *Nb
+ );
+
+/// Reference to a method.
+typedef F_GET_SOCKET *PF_GET_SOCKET;
+
+/**
+ * Get the enabled Compute Units.
+ *
+ * Processors which don't support compute units return zero.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node The node for which we want the enabled compute units.
+ * @param[in] Nb Our Northbridge.
+ *
+ * @return The enabled compute units value.
+ */
+typedef UINT8 F_GET_ENABLED_COMPUTE_UNITS (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+
+/// Reference to a method.
+typedef F_GET_ENABLED_COMPUTE_UNITS *PF_GET_ENABLED_COMPUTE_UNITS;
+
+/**
+ * Get the dual core Compute Units.
+ *
+ * Processors which don't support compute units return zero.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node The node for which we want the dual core compute units.
+ * @param[in] Nb Our Northbridge.
+ *
+ * @return The dual core compute units value.
+ */
+typedef UINT8 F_GET_DUALCORE_COMPUTE_UNITS (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+
+/// Reference to a method.
+typedef F_GET_DUALCORE_COMPUTE_UNITS *PF_GET_DUALCORE_COMPUTE_UNITS;
+
+/**
+ * Get the triple core Compute Units.
+ *
+ * Processors which don't support compute units or triple core compute units return zero.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node The node for which we want the triple core compute units.
+ * @param[in] Nb Our Northbridge.
+ *
+ * @return The triple core compute units value.
+ */
+typedef UINT8 F_GET_TRIPLECORE_COMPUTE_UNITS (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+
+/// Reference to a method.
+typedef F_GET_TRIPLECORE_COMPUTE_UNITS *PF_GET_TRIPLECORE_COMPUTE_UNITS;
+
+/**
+ * Get the quad core Compute Units.
+ *
+ * Processors which don't support compute units or quad core compute units return zero.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node The node for which we want the quad core compute units.
+ * @param[in] Nb Our Northbridge.
+ *
+ * @return The quad core compute units value.
+ */
+typedef UINT8 F_GET_QUADCORE_COMPUTE_UNITS (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+
+/// Reference to a method.
+typedef F_GET_QUADCORE_COMPUTE_UNITS *PF_GET_QUADCORE_COMPUTE_UNITS;
+
+/**
+ * Return the Link to the Southbridge
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Nb this northbridge
+ *
+ * @return the Link to the southbridge
+ */
+typedef UINT8 F_READ_SB_LINK (
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_READ_SB_LINK *PF_READ_SB_LINK;
+
+/**
+ * Verify that the Link is non-coherent, connected, and ready
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will be examined
+ * @param[in] Link the Link on that Node to examine
+ * @param[in] Nb this northbridge
+ *
+ * @retval TRUE The Link is non-coherent.
+ * @retval FALSE The Link has some other status
+ */
+typedef BOOLEAN F_VERIFY_LINK_IS_NON_COHERENT (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_VERIFY_LINK_IS_NON_COHERENT *PF_VERIFY_LINK_IS_NON_COHERENT;
+
+/**
+ * Enable config access to a non-coherent chain for the given bus range.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] ConfigMapIndex the map entry to set
+ * @param[in] SecBus The secondary bus number to use
+ * @param[in] SubBus The subordinate bus number to use
+ * @param[in] TargetNode The Node that shall be the recipient of the traffic
+ * @param[in] TargetLink The Link that shall be the recipient of the traffic
+ * @param[in] State our global state
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_SET_CONFIG_ADDR_MAP (
+ IN UINT8 ConfigMapIndex,
+ IN UINT8 SecBus,
+ IN UINT8 SubBus,
+ IN UINT8 TargetNode,
+ IN UINT8 TargetLink,
+ IN STATE_DATA *State,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_SET_CONFIG_ADDR_MAP *PF_SET_CONFIG_ADDR_MAP;
+
+/**
+ * For a given non-coherent chain provide the bus range and mapping.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] ConfigMapIndex the map entry to get
+ * @param[out] SecBus The secondary bus number.
+ * @param[out] SubBus The subordinate bus number.
+ * @param[out] TargetNode The Node that is the recipient of the traffic
+ * @param[out] TargetLink The Link that is the recipient of the traffic
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_GET_CONFIG_ADDR_MAP (
+ IN UINT8 ConfigMapIndex,
+ OUT UINT8 *SecBus,
+ OUT UINT8 *SubBus,
+ OUT UINT8 *TargetNode,
+ OUT UINT8 *TargetLink,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_GET_CONFIG_ADDR_MAP *PF_GET_CONFIG_ADDR_MAP;
+
+/**
+ * Northbridge specific Frequency limit.
+ *
+ * @HtNbInstances
+ *
+ * Return a mask that eliminates HT frequencies that cannot be used due to a slow
+ * northbridge frequency.
+ *
+ * @param[in] Node Result could (later) be for a specific Node
+ * @param[in] Interface Access to non-HT support functions.
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] Nb this northbridge
+ *
+ * @return Frequency mask
+ */
+typedef UINT32 F_NORTH_BRIDGE_FREQ_MASK (
+ IN UINT8 Node,
+ IN HT_INTERFACE *Interface,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_NORTH_BRIDGE_FREQ_MASK *PF_NORTH_BRIDGE_FREQ_MASK;
+
+/**
+ * Get Link features into system data structure.
+ *
+ * @HtNbInstances
+ *
+ * @param[in,out] ThisPort The PortList structure entry for this link's port
+ * @param[in] Interface Access to non-HT support functions.
+ * @param[in] PlatformConfig Platform profile/build option config structure.
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_GATHER_LINK_FEATURES (
+ IN OUT PORT_DESCRIPTOR *ThisPort,
+ IN HT_INTERFACE *Interface,
+ IN PLATFORM_CONFIGURATION *PlatformConfig,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_GATHER_LINK_FEATURES *PF_GATHER_LINK_FEATURES;
+
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the node on which to regang a link
+ * @param[in] Link the sublink 0 of the sublink pair to regang
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_SET_LINK_REGANG (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_SET_LINK_REGANG *PF_SET_LINK_REGANG;
+
+/**
+ * Change the hardware state for all Links according to the now optimized data in the
+ * port list data structure.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the node on which to set frequency for a link
+ * @param[in] Link the link to set frequency
+ * @param[in] Frequency the frequency to set
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_SET_LINK_FREQUENCY (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Frequency,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_SET_LINK_FREQUENCY *PF_SET_LINK_FREQUENCY;
+
+/**
+ * Set the link's Unit Id Clumping enable.
+ *
+ * @HtNbInstances
+ *
+ * This applies to the host root of a non-coherent chain.
+ *
+ * @param[in] Node the node on which to set frequency for a link
+ * @param[in] Link the link to set frequency
+ * @param[in] ClumpingEnables the unit id clumping enables to set
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_SET_LINK_UNITID_CLUMPING (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT32 ClumpingEnables,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_SET_LINK_UNITID_CLUMPING *PF_SET_LINK_UNITID_CLUMPING;
+
+/**
+ * Set the traffic distribution register for the Links provided.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Links01 coherent Links from Node 0 to 1
+ * @param[in] Links10 coherent Links from Node 1 to 0
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_WRITE_TRAFFIC_DISTRIBUTION (
+ IN UINT32 Links01,
+ IN UINT32 Links10,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_WRITE_TRAFFIC_DISTRIBUTION *PF_WRITE_TRAFFIC_DISTRIBUTION;
+
+/**
+ * Set the traffic distribution register for the Links provided.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] NodeA Source Node from Node A To Node B and DstNode from Node A To Node B
+ * @param[in] NodeB Source Node from Node B To Node A and DstNode from Node A To Node B
+ * @param[in] VictimedLinkFromNodeAToNodeB Victimed Link from Node A To Node B
+ * @param[in] VictimedLinkFromNodeBToNodeA Victimed Link from Node B To Node A
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_WRITE_VICTIM_DISTRIBUTION (
+ IN UINT8 NodeA,
+ IN UINT8 NodeB,
+ IN UINT32 VictimedLinkFromNodeAToNodeB,
+ IN UINT32 VictimedLinkFromNodeBToNodeA,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_WRITE_VICTIM_DISTRIBUTION *PF_WRITE_VICTIM_DISTRIBUTION;
+
+/**
+ * Write a link pair to the link pair distribution and fixups.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node Set the pair on this node
+ * @param[in] ConnectedNode The Node to which this link pair directly connects.
+ * @param[in] Pair Using this pair set in the register
+ * @param[in] Asymmetric True if different widths
+ * @param[in] MasterLink Set this as the master link and in the route
+ * @param[in] AlternateLink Set this as the alternate link
+ * @param[in] Nb this northbridge
+ *
+ */
+typedef VOID F_WRITE_LINK_PAIR_DISTRIBUTION (
+ IN UINT8 Node,
+ IN UINT8 ConnectedNode,
+ IN UINT8 Pair,
+ IN BOOLEAN Asymmetric,
+ IN UINT8 MasterLink,
+ IN UINT8 AlternateLink,
+ IN NORTHBRIDGE *Nb
+ );
+/// Pointer to method WriteLinkPairDistribution
+typedef F_WRITE_LINK_PAIR_DISTRIBUTION *PF_WRITE_LINK_PAIR_DISTRIBUTION;
+
+/**
+ * Family specific tunings.
+ *
+ * @HtNbInstances
+ *
+ * Buffer tunings are inherently northbridge specific. Check for specific configs
+ * which require adjustments and apply any standard workarounds to this Node.
+ *
+ * @param[in] Node the Node to tune
+ * @param[in] State global state
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_BUFFER_OPTIMIZATIONS (
+ IN UINT8 Node,
+ IN STATE_DATA *State,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_BUFFER_OPTIMIZATIONS *PF_BUFFER_OPTIMIZATIONS;
+
+/**
+ * Return the number of cores (1 based count) on Node.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will be examined
+ * @param[in] Nb this northbridge
+ *
+ * @return the number of cores
+ */
+typedef UINT8 F_GET_NUM_CORES_ON_NODE (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_GET_NUM_CORES_ON_NODE *PF_GET_NUM_CORES_ON_NODE;
+
+/**
+ * Write the total number of cores and Nodes to the Node
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will be examined
+ * @param[in] TotalNodes the total number of Nodes
+ * @param[in] TotalCores the total number of cores
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_SET_TOTAL_NODES_AND_CORES (
+ IN UINT8 Node,
+ IN UINT8 TotalNodes,
+ IN UINT8 TotalCores,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_SET_TOTAL_NODES_AND_CORES *PF_SET_TOTAL_NODES_AND_CORES;
+
+/**
+ * Get the Count of Nodes in the system.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Nb This Northbridge.
+ *
+ * @return The Count (1 based) of Nodes in the system.
+ */
+typedef UINT8 F_GET_NODE_COUNT (
+ IN NORTHBRIDGE *Nb
+ );
+
+/// Reference to a method.
+typedef F_GET_NODE_COUNT *PF_GET_NODE_COUNT;
+
+/**
+ * Limit coherent config accesses to cpus as indicated by Nodecnt.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will be examined
+ * @param[in] Nb this northbridge
+ */
+typedef VOID F_LIMIT_NODES (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_LIMIT_NODES *PF_LIMIT_NODES;
+
+/**
+ * Return the LinkFailed status AFTER an attempt is made to clear the bit.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node that will be examined
+ * @param[in] Link the Link on that Node to examine
+ * @param[in] State access to call back routine
+ * @param[in] Nb this northbridge
+ *
+ * @retval TRUE the Link is not connected or has hard error
+ * @retval FALSE the Link is connected
+ */
+typedef BOOLEAN F_READ_TRUE_LINK_FAIL_STATUS (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN STATE_DATA *State,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_READ_TRUE_LINK_FAIL_STATUS *PF_READ_TRUE_LINK_FAIL_STATUS;
+
+/**
+ * Get the next link for iterating over the links on a node in the correct order.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node The node on which to iterate links.
+ * @param[in,out] Link IN: the current iteration context, OUT: the next link.
+ * @param[in] Nb This Northbridge, access to config pointer.
+ *
+ * @retval LinkIteratorEnd There is no next link (Link is back to BEGIN).
+ * @retval LinkIteratorExternal The next Link is an external link.
+ * @retval LinkIteratorInternal The next Link is an internal link.
+ */
+typedef LINK_ITERATOR_STATUS F_GET_NEXT_LINK (
+ IN UINT8 Node,
+ IN OUT UINT8 *Link,
+ IN NORTHBRIDGE *Nb
+ );
+/// Pointer to method GetNextLink
+typedef F_GET_NEXT_LINK *PF_GET_NEXT_LINK;
+
+/**
+ * Get the Package Link number, given the node and real link number.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the node which has this link
+ * @param[in] Link the link on that node
+ * @param[in] Nb this northbridge
+ *
+ * @return the Package Link
+ *
+ */
+typedef UINT8 F_GET_PACKAGE_LINK (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method
+typedef F_GET_PACKAGE_LINK *PF_GET_PACKAGE_LINK;
+
+/**
+ * Return the HT Host capability base PCI config address for a Link.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node this Link is on
+ * @param[in] Link the Link
+ * @param[in] Nb this northbridge
+ *
+ * @return the pci config address
+ */
+typedef PCI_ADDR F_MAKE_LINK_BASE (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_MAKE_LINK_BASE *PF_MAKE_LINK_BASE;
+
+/**
+ * Make a compatibility key.
+ *
+ * @HtNbInstances
+ *
+ * @param[in] Node the Node
+ * @param[in] Nb this northbridge
+ *
+ * @return the key
+ */
+typedef UINT64 F_MAKE_KEY (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+/// Reference to a method.
+typedef F_MAKE_KEY *PF_MAKE_KEY;
+
+/**
+ * The northbridge interface.
+ *
+ * Abstract the hardware implementation of the processor northbridge. Feature code does
+ * not need to be tailored to specific families. Also, more than a single family (or
+ * model in some cases) can be supported at once. Multiple family support can be for
+ * mixed revisions or for incompatible revisions where only one is used at a time.
+ *
+ * The northbridge object contains both HT component public and northbridge private
+ * members. These sets are grouped together. Within each group, members are grouped
+ * according to the function area they support.
+ *
+ */
+struct _NORTHBRIDGE { // See forward declaration in HtFeats.h
+ /* Public data, clients of northbridge can access */
+ UINT8 MaxLinks; /**< The maximum number of Links implemented by the northbridge */
+ UINT8 MaxConfigMaps; /**< The maximum number of PCI config maps implemented by the northbridge */
+
+ /* Public Interfaces for northbridge clients, coherent init*/
+ PF_WRITE_ROUTING_TABLE WriteRoutingTable; /**< Method: Write a Temporary route for discovery */
+ PF_WRITE_NODEID WriteNodeID; /**< Method: Assign a Node ID*/
+ PF_READ_DEFAULT_LINK ReadDefaultLink; /**< Method: Which link are we connected to on a remote node? */
+ PF_ENABLE_ROUTING_TABLES EnableRoutingTables; /**< Method: Make the routing table active */
+ PF_DISABLE_ROUTING_TABLES DisableRoutingTables; /**< Method: Put a node back in discoverable state (deflnk) */
+ PF_VERIFY_LINK_IS_COHERENT VerifyLinkIsCoherent; /**< Method: is a link connected and coherent? */
+ PF_READ_TOKEN ReadToken; /**< Method: Read the enumeration token from a node */
+ PF_WRITE_TOKEN WriteToken; /**< Method: Assign an enumeration token to a node */
+ PF_WRITE_FULL_ROUTING_TABLE WriteFullRoutingTable; /**< Method: Set a complete routing table entry on a node */
+ PF_IS_ILLEGAL_TYPE_MIX IsIllegalTypeMix; /**< Method: Is this node compatible with the system */
+ PF_IS_EXCEEDED_CAPABLE IsExceededCapable; /**< Method: Is this node capable of working in this system */
+ PF_STOP_LINK StopLink; /**< Method: stop a link which must be unused */
+ PF_HANDLE_SPECIAL_LINK_CASE HandleSpecialLinkCase; /**< Method: Fix broken configuration designs */
+ PF_HANDLE_SPECIAL_NODE_CASE HandleSpecialNodeCase; /**< Method: Fix broken configuration designs */
+
+ /* Public Interfaces for northbridge clients, noncoherent init */
+ PF_READ_SB_LINK ReadSouthbridgeLink; /**< Method: Which link goes to the southbridge? */
+ PF_VERIFY_LINK_IS_NON_COHERENT VerifyLinkIsNonCoherent; /**< Method: is a link connected and non-coherent? */
+ PF_SET_CONFIG_ADDR_MAP SetConfigAddrMap; /**< Method: Add a non-coherent chain to the PCI Config Bus Address Map */
+ PF_GET_CONFIG_ADDR_MAP GetConfigAddrMap; /**< Method: Provide a chain's mapping and bus allocation */
+
+ /* Public Interfaces for northbridge clients, Optimization */
+ PF_NORTH_BRIDGE_FREQ_MASK NorthBridgeFreqMask; /**< Method: Check for frequency limits other than HT */
+ PF_GATHER_LINK_FEATURES GatherLinkFeatures; /**< Method: Get frequency and link features */
+ PF_SET_LINK_REGANG SetLinkRegang; /**< Method: Set a Link to regang */
+ PF_SET_LINK_FREQUENCY SetLinkFrequency; /**< Method: Set the link Frequency */
+ PF_SET_LINK_UNITID_CLUMPING SetLinkUnitIdClumping; /**< Method: Set the link's Unit Id Clumping register */
+
+ /* Public Interfaces for northbridge clients, System and performance Tuning. */
+ PF_WRITE_TRAFFIC_DISTRIBUTION WriteTrafficDistribution; /**< Method: traffic distribution setting */
+ PF_WRITE_LINK_PAIR_DISTRIBUTION WriteLinkPairDistribution; /**< Method: Link Pair setting and fix up */
+ PF_WRITE_VICTIM_DISTRIBUTION WriteVictimDistribution; /**< Method: victim distribution setting */
+ PF_BUFFER_OPTIMIZATIONS BufferOptimizations; /**< Method: system tunings which can not be
+ * done using register table */
+
+ /* Public Interfaces for northbridge clients, utility routines */
+ PF_GET_NUM_CORES_ON_NODE GetNumCoresOnNode; /**< Method: Count cores */
+ PF_SET_TOTAL_NODES_AND_CORES SetTotalNodesAndCores; /**< Method: Set Node and Core counts */
+ PF_GET_NODE_COUNT GetNodeCount; /**< Method: Get the Count (1 based) of Nodes in the system. */
+ PF_LIMIT_NODES LimitNodes; /**< Method: Set the Limit Config Space feature */
+ PF_READ_TRUE_LINK_FAIL_STATUS ReadTrueLinkFailStatus; /**< Method: Get Fault status and connectivity of a link */
+ PF_GET_NEXT_LINK GetNextLink; /**< Method: Iterate over a node's Internal, then External links. */
+ PF_GET_PACKAGE_LINK GetPackageLink; /**< Method: the package link corresponding to a node's link */
+ PF_MAKE_LINK_BASE MakeLinkBase; /**< Method: Provide the PCI Config Base register offset of a CPU link */
+ PF_GET_MODULE_INFO GetModuleInfo; /**< Method: Get Module Type and internal Module number */
+ PF_POST_MAILBOX PostMailbox; /**< Method: Post info to the mailbox register */
+ PF_RETRIEVE_MAILBOX RetrieveMailbox; /**< Method: Retrieve info from the mailbox register */
+ PF_GET_SOCKET GetSocket; /**< Method: Get a node's Socket, using the hardware naming method. */
+ PF_GET_ENABLED_COMPUTE_UNITS GetEnabledComputeUnits; /**< Method: Get the Enabled Compute Units */
+ PF_GET_DUALCORE_COMPUTE_UNITS GetDualCoreComputeUnits; /**< Method: Get which Compute Units have two cores. */
+ PF_GET_TRIPLECORE_COMPUTE_UNITS GetTripleCoreComputeUnits; /**< Method: Get which Compute Units have triple cores. */
+ PF_GET_QUADCORE_COMPUTE_UNITS GetQuadCoreComputeUnits; /**< Method: Get which Compute Units have quad cores. */
+
+ /* Private Data for northbridge implementation use only */
+ UINT32 SelfRouteRequestMask; /**< Bit pattern for route request to self in routing table register */
+ UINT32 SelfRouteResponseMask; /**< Bit pattern for route response to self in routing table register */
+ UINT8 BroadcastSelfBit; /**< Bit offset of broadcast self bit in routing table register */
+ BOOLEAN IsOrderBSPCoresByNode; /**< This processor orders Cores by Node id on the BSP, if TRUE. */
+ BOOLEAN IsOrderCoresByModule; /**< Processors other than the BSP order Cores by Module, if TRUE. */
+ UINT64 CompatibleKey; /**< Used for checking compatibility of northbridges in the system */
+ PACKAGE_HTLINK_MAP PackageLinkMap; /**< Tell GetPackageLink() how to assign link names */
+ UINT32 CoreFrequency; /**< Cache the northbridge core frequency, so repeated interface calls are avoided.
+ * A value of zero, means no value yet. */
+ IGNORE_LINK *DefaultIgnoreLinkList; /**< After processing the user interface ignore link, process this list. */
+
+ /* Private Interfaces for northbridge implementation. */
+ PF_MAKE_KEY MakeKey; /**< Method: make the compatibility key for this node */
+
+ /** Config Pointer, opaque handle for passing to lib */
+ VOID *ConfigHandle;
+};
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+/**
+ * Make a compatibility key.
+ *
+ */
+UINT64
+MakeKey (
+ IN UINT8 Node,
+ IN NORTHBRIDGE *Nb
+ );
+
+VOID
+NewNorthBridge (
+ IN UINT8 Node,
+ IN STATE_DATA *State,
+ OUT NORTHBRIDGE *Nb
+ );
+
+#endif /* _HT_NB_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNbCommonHardware.h b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNbCommonHardware.h
new file mode 100644
index 0000000..eda0f5e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNbCommonHardware.h
@@ -0,0 +1,122 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge hardware definitions for Family 10h.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _HT_NB_HARDWARE_FAM10_H_
+#define _HT_NB_HARDWARE_FAM10_H_
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* CPU Northbridge Functions */
+#define CPU_HTNB_FUNC_00 0
+#define CPU_HTNB_FUNC_04 4
+#define CPU_ADDR_FUNC_01 1
+#define CPU_NB_FUNC_03 3
+#define CPU_NB_FUNC_05 5
+
+/* Function 0 registers */
+#define REG_ROUTE0_0X40 0x40
+#define REG_ROUTE1_0X44 0x44
+#define REG_NODE_ID_0X60 0x60
+#define REG_UNIT_ID_0X64 0x64
+#define REG_LINK_TRANS_CONTROL_0X68 0x68
+#define REG_LINK_INIT_CONTROL_0X6C 0x6C
+#define REG_HT_CAP_BASE_0X80 0x80
+#define REG_HT_LINK_CLUMPING0_0X110 0x110
+#define REG_HT_LINK_RETRY0_0X130 0x130
+#define REG_HT_EXTENDED_NODE_ID_F0X160 0x160
+#define HTREG_NODE_CPUCNT_4_0 0x1F
+#define HTREG_EXTNODE_CPUCNT_7_5 0xE0
+#define REG_HT_TRAFFIC_DIST_0X164 0x164
+#define REG_LINK_GLOBAL_EXT_CONTROL_0x16C 0x16C
+#define REG_HT_LINK_EXT_CONTROL0_0X170 0x170
+#define REG_HT_LINK_INITIALIZATION_0X1A0 0x1A0
+#define PAIR_SELECT_OFFSET 8
+#define REG_HT_LINK_PAIR_DIST_0X1E0 0x1E0
+
+/* Function 1 registers */
+#define REG_ADDR_CONFIG_MAP0_1XE0 0xE0
+#define CPU_ADDR_NUM_CONFIG_MAPS 4
+
+/* Function 3 registers */
+#define REG_NB_SRI_XBAR_BUF_3X70 0x70
+#define REG_NB_MCT_XBAR_BUF_3X78 0x78
+#define REG_NB_FIFOPTR_3XDC 0xDC
+#define REG_NB_CAPABILITY_3XE8 0xE8
+#define REG_NB_CPUID_3XFC 0xFC
+#define REG_NB_LINK_XCS_TOKEN0_3X148 0x148
+#define REG_NB_MCA_LINK_THRESHOLD_3X168 0x168
+#define REG_NB_MCA_L3_THRESHOLD_3X170 0x170
+#define REG_NB_DOWNCORE_3X190 0x190
+#define REG_NB_SBI_CONTROL_3X1E4 0x1E4
+
+/* Function 4 registers */
+
+/* Function 5 registers */
+#define REG_NB_COMPUTE_UNIT_5X80 0x80
+#define REG_NB_CAPABILITY_2_5X84 0x84
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif /* _HT_NB_HARDWARE_FAM10_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNotify.c b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNotify.c
new file mode 100644
index 0000000..22c3eb8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNotify.c
@@ -0,0 +1,669 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Code for detailed notification of events and status.
+ *
+ * Routines for logging and reporting details and summary status.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNotify.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_HT_HTNOTIFY_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Log an event.
+ *
+ * Errors, events, faults, warnings, and useful information are provided by
+ * calling this routine as often as necessary, once for each notification.
+ * @sa AGESA.h for class, and event definitions.
+ * @sa htNotify.h for event data definitions.
+ *
+ * @param[in] EvtClass What level event is this
+ * @param[in] Event A unique ID of this event
+ * @param[in] EventData useful data associated with the event.
+ * @param[in] State the log area and remaining free space
+ */
+VOID
+STATIC
+setEventNotify (
+ IN AGESA_STATUS EvtClass,
+ IN UINT32 Event,
+ IN CONST UINT8 *EventData,
+ IN STATE_DATA *State
+ )
+{
+ UINT32 DataParam[NUMBER_OF_EVENT_DATA_PARAMS];
+
+ // Remember the highest event class notified, that becomes our return code.
+ if (State->MaxEventClass < EvtClass) {
+ State->MaxEventClass = EvtClass;
+ }
+
+ // Copy the event data to the log data
+ LibAmdMemCopy (
+ DataParam,
+ (VOID *)EventData,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ // Log the event
+ PutEventLog (
+ EvtClass,
+ Event,
+ DataParam[0],
+ DataParam[1],
+ DataParam[2],
+ DataParam[3],
+ State->ConfigHandle
+ );
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_HW_SYNCFLOOD
+ *
+ * @param[in] Node The node on which the fault is reported
+ * @param[in] Link The link from that node
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyAlertHwSyncFlood (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_HW_SYNCFLOOD Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ IDS_HDT_CONSOLE (HT_TRACE, "Sync Flood on Node %d Link %d.\n", Node, Link);
+ Evt.Node = Node;
+ Evt.Link = Link;
+ setEventNotify (AGESA_ALERT,
+ HT_EVENT_HW_SYNCFLOOD,
+ (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_HW_HTCRC
+ *
+ * @param[in] Node The node on which the error is reported
+ * @param[in] Link The link from that node
+ * @param[in] LaneMask The lanes which had CRC
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyAlertHwHtCrc (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 LaneMask,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_HW_HT_CRC Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ IDS_HDT_CONSOLE (HT_TRACE, "CRC Error on Node %d Link %d lanes %x.\n", Node, Link, LaneMask);
+ Evt.Node = Node;
+ Evt.Link = Link;
+ Evt.LaneMask = LaneMask;
+ setEventNotify (AGESA_ALERT,
+ HT_EVENT_HW_HTCRC,
+ (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_NCOH_BUS_MAX_EXCEED
+ *
+ * @param[in] Node The node on which the chain is located
+ * @param[in] Link The link from that node
+ * @param[in] Bus The bus number to assign
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyErrorNcohBusMaxExceed (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Bus,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_NCOH_BUS_MAX_EXCEED Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ Evt.Node = Node;
+ Evt.Link = Link;
+ Evt.Bus = Bus;
+ setEventNotify (AGESA_ERROR,
+ HT_EVENT_NCOH_BUS_MAX_EXCEED,
+ (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_NCOH_CFG_MAP_EXCEED
+ *
+ * @param[in] Node The node on which the chain is located
+ * @param[in] Link The link from that node
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyErrorNcohCfgMapExceed (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_NCOH_CFG_MAP_EXCEED Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ Evt.Node = Node;
+ Evt.Link = Link;
+ setEventNotify (AGESA_ERROR,
+ HT_EVENT_NCOH_CFG_MAP_EXCEED,
+ (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_NCOH_BUID_EXCEED
+ *
+ * @param[in] Node The node on which the chain is located
+ * @param[in] Link The link from that node
+ * @param[in] Depth Position on chain
+ * @param[in] Id The Id which was attempted to assigned
+ * @param[in] Units The number of units in this device
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyErrorNcohBuidExceed (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Depth,
+ IN UINT8 Id,
+ IN UINT8 Units,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_NCOH_BUID_EXCEED Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ Evt.Node = Node;
+ Evt.Link = Link;
+ Evt.Depth = Depth;
+ Evt.CurrentBuid = Id;
+ Evt.UnitCount = Units;
+ setEventNotify (AGESA_ERROR,
+ HT_EVENT_NCOH_BUID_EXCEED,
+ (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_NCOH_DEVICE_FAILED
+ *
+ * @param[in] Node The node on which the chain is located
+ * @param[in] Link The link from that node
+ * @param[in] Depth Position on chain
+ * @param[in] Id The Id which was attempted to assigned
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyErrorNcohDeviceFailed (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Depth,
+ IN UINT8 Id,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_NCOH_DEVICE_FAILED Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ Evt.Node = Node;
+ Evt.Link = Link;
+ Evt.Depth = Depth;
+ Evt.AttemptedBuid = Id;
+ setEventNotify (AGESA_ERROR,
+ HT_EVENT_NCOH_DEVICE_FAILED,
+ (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_NCOH_AUTO_DEPTH
+ *
+ * @param[in] Node The node on which the chain is located
+ * @param[in] Link The link from that node
+ * @param[in] Depth Position on chain
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyInfoNcohAutoDepth (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Depth,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_NCOH_AUTO_DEPTH Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ Evt.Node = Node;
+ Evt.Link = Link;
+ Evt.Depth = Depth;
+ setEventNotify (AGESA_SUCCESS,
+ HT_EVENT_NCOH_AUTO_DEPTH,
+ (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_OPT_REQUIRED_CAP_RETRY
+ *
+ * @param[in] Node The node on which the chain is located
+ * @param[in] Link The link from that node
+ * @param[in] Depth Position on chain
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyWarningOptRequiredCapRetry (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Depth,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_OPT_REQUIRED_CAP Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ Evt.Node = Node;
+ Evt.Link = Link;
+ Evt.Depth = Depth;
+ setEventNotify (AGESA_WARNING,
+ HT_EVENT_OPT_REQUIRED_CAP_RETRY,
+ (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_OPT_REQUIRED_CAP_GEN3
+ *
+ * @param[in] Node The node on which the chain is located
+ * @param[in] Link The link from that node
+ * @param[in] Depth Position on chain
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyWarningOptRequiredCapGen3 (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Depth,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_OPT_REQUIRED_CAP Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ Evt.Node = Node;
+ Evt.Link = Link;
+ Evt.Depth = Depth;
+ setEventNotify (AGESA_WARNING,
+ HT_EVENT_OPT_REQUIRED_CAP_GEN3,
+ (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_OPT_UNUSED_LINKS
+ *
+ * @param[in] NodeA One of the nodes connected
+ * @param[in] NodeB The other connected node
+ * @param[in] LinkA its unusable link
+ * @param[in] LinkB its unusable link
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyWarningOptUnusedLinks (
+ IN UINT32 NodeA,
+ IN UINT32 LinkA,
+ IN UINT32 NodeB,
+ IN UINT32 LinkB,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_OPT_UNUSED_LINKS Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ Evt.NodeA = NodeA;
+ Evt.LinkA = LinkA;
+ Evt.NodeB = NodeB;
+ Evt.LinkB = LinkB;
+ setEventNotify (AGESA_WARNING,
+ HT_EVENT_OPT_UNUSED_LINKS,
+ (UINT8 *)&Evt, State);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_OPT_LINK_PAIR_EXCEED
+ *
+ * @param[in] NodeA One of the nodes connected
+ * @param[in] NodeB The other connected node
+ * @param[in] MasterLink its unusable Masterlink
+ * @param[in] AltLink its unusable Alternate link
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyWarningOptLinkPairExceed (
+ IN UINT32 NodeA,
+ IN UINT32 NodeB,
+ IN UINT32 MasterLink,
+ IN UINT32 AltLink,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_OPT_LINK_PAIR_EXCEED Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ Evt.NodeA = NodeA;
+ Evt.MasterLink = MasterLink;
+ Evt.NodeB = NodeB;
+ Evt.AltLink = AltLink;
+ setEventNotify (AGESA_WARNING,
+ HT_EVENT_OPT_LINK_PAIR_EXCEED,
+ (UINT8 *)&Evt, State);
+}
+
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_COH_NO_TOPOLOGY
+ *
+ * @param[in] Nodes The total number of nodes found so far
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyErrorCohNoTopology (
+ IN UINT8 Nodes,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_COH_NO_TOPOLOGY Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ IDS_HDT_CONSOLE (HT_TRACE, "No Topology Matched system with %d nodes found.\n", Nodes);
+ Evt.TotalNodes = Nodes;
+ setEventNotify (AGESA_ERROR,
+ HT_EVENT_COH_NO_TOPOLOGY,
+ (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_COH_PROCESSOR_TYPE_MIX
+ *
+ * @param[in] Node The node from which a new node was discovered
+ * @param[in] Link The link from that node
+ * @param[in] Nodes The total number of nodes found so far
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyFatalCohProcessorTypeMix (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Nodes,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_COH_PROCESSOR_TYPE_MIX Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ IDS_HDT_CONSOLE (HT_TRACE, "Illegal Processor Type Mix.\n");
+ Evt.Node = Node;
+ Evt.Link = Link;
+ Evt.TotalNodes = Nodes;
+ setEventNotify (AGESA_CRITICAL,
+ HT_EVENT_COH_PROCESSOR_TYPE_MIX,
+ (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_COH_NODE_DISCOVERED
+ *
+ * @param[in] Node Node from which a new node was discovered
+ * @param[in] Link The link to that new node
+ * @param[in] NewNode The new node's id
+ * @param[in] TempRoute Temporarily, during discovery, the new node is accessed at this id.
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyInfoCohNodeDiscovered (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 NewNode,
+ IN UINT8 TempRoute,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_COH_NODE_DISCOVERED Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ IDS_HDT_CONSOLE (HT_TRACE, "Adding Node %d.\n", NewNode);
+ Evt.Node = Node;
+ Evt.Link = Link;
+ Evt.NewNode = NewNode;
+ Evt.TempRoute = TempRoute;
+ setEventNotify (AGESA_SUCCESS,
+ HT_EVENT_COH_NODE_DISCOVERED,
+ (UINT8 *)&Evt, State);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * For event HT_EVENT_COH_MPCAP_MISMATCH
+ *
+ * @param[in] Node The node from which a new node was discovered
+ * @param[in] Link The link from that node
+ * @param[in] Cap The aggregate system MP Capability
+ * @param[in] Nodes The total number of nodes found so far
+ * @param[in] State our State
+ *
+ */
+VOID
+NotifyFatalCohMpCapMismatch (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Cap,
+ IN UINT8 Nodes,
+ IN STATE_DATA *State
+ )
+{
+ HT_EVENT_DATA_COH_MP_CAP_MISMATCH Evt;
+ // Zero out the event data
+ LibAmdMemFill (
+ &Evt,
+ 0,
+ (sizeof(UINT32) * NUMBER_OF_EVENT_DATA_PARAMS),
+ State->ConfigHandle
+ );
+
+ IDS_HDT_CONSOLE (HT_TRACE, "Mp Capability Mismatch.\n");
+ Evt.Node = Node;
+ Evt.Link = Link;
+ Evt.SysMpCap = Cap;
+ Evt.TotalNodes = Nodes;
+ setEventNotify (AGESA_CRITICAL,
+ HT_EVENT_COH_MPCAP_MISMATCH,
+ (UINT8 *)&Evt, State);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNotify.h b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNotify.h
new file mode 100644
index 0000000..58d0cbe
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htNotify.h
@@ -0,0 +1,297 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HT Notify interface.
+ *
+ * This file provides internal interface to event and status
+ * notification.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _HT_NOTIFY_H_
+#define _HT_NOTIFY_H_
+
+/*----------------------------------------------------------------------------------------*/
+/* Event specific event data definitions.
+ * All structures must be 4 UINT32's in size, no more, no less.
+ */
+
+/// For event ::HT_EVENT_HW_SYNCFLOOD
+typedef struct {
+ UINT32 Node; ///< The Node on which observed
+ UINT32 Link; ///< The Link on that Node which reported synch flood
+ UINT32 Reserved1; ///< Reserved.
+ UINT32 Reserved2; ///< Reserved.
+} HT_EVENT_DATA_HW_SYNCFLOOD;
+
+/// For event ::HT_EVENT_HW_HTCRC
+typedef struct {
+ UINT32 Node; ///< The Node on which event is observed
+ UINT32 Link; ///< The Link on that Node which reported CRC error
+ UINT32 LaneMask; ///< The CRC lane mask for the Link
+ UINT32 Reserved1; ///< Reserved.
+} HT_EVENT_DATA_HW_HT_CRC;
+
+/// For event ::HT_EVENT_NCOH_BUS_MAX_EXCEED
+typedef struct {
+ UINT32 Node; ///< the Node with this non-coherent chain
+ UINT32 Link; ///< the Link on that Node to this chain
+ UINT32 Bus; ///< the current bus number
+ UINT32 Reserved1; ///< Reserved.
+} HT_EVENT_DATA_NCOH_BUS_MAX_EXCEED;
+
+/// For event ::HT_EVENT_NCOH_CFG_MAP_EXCEED
+typedef struct {
+ UINT32 Node; ///< the Node with this non-coherent chain
+ UINT32 Link; ///< the Link on that Node to this chain
+ UINT32 Reserved1; ///< Reserved.
+ UINT32 Reserved2; ///< Reserved.
+} HT_EVENT_DATA_NCOH_CFG_MAP_EXCEED;
+
+/// For event ::HT_EVENT_NCOH_BUID_EXCEED
+typedef struct {
+ UINT32 Node; ///< the Node with this non-coherent chain
+ UINT32 Link; ///< the Link on that Node to this chain
+ UINT32 Depth; ///< the position on the chain, zero is CPU host
+ UINT16 CurrentBuid; ///< the current available BUID
+ UINT16 UnitCount; ///< the number of ids which would be consumed by this device
+} HT_EVENT_DATA_NCOH_BUID_EXCEED;
+
+/// For event ::HT_EVENT_NCOH_DEVICE_FAILED
+typedef struct {
+ UINT32 Node; ///< the Node with this non-coherent chain
+ UINT32 Link; ///< the Link on that Node to this chain
+ UINT32 Depth; ///< the position on the chain, zero is CPU host
+ UINT32 AttemptedBuid; ///< the BUID we tried to assign to that device
+} HT_EVENT_DATA_NCOH_DEVICE_FAILED;
+
+/// For event ::HT_EVENT_NCOH_AUTO_DEPTH
+typedef struct {
+ UINT32 Node; ///< the Node with this non-coherent chain
+ UINT32 Link; ///< the Link on that Node to this chain
+ UINT32 Depth; ///< the position on the chain of the last device, zero is CPU host
+ UINT32 Reserved1; ///< Reserved.
+} HT_EVENT_DATA_NCOH_AUTO_DEPTH;
+
+/// For event ::HT_EVENT_OPT_REQUIRED_CAP_RETRY,
+/// ::HT_EVENT_OPT_REQUIRED_CAP_GEN3.
+typedef struct {
+ UINT32 Node; ///< the Node with this non-coherent chain
+ UINT32 Link; ///< the Link on that Node to this chain
+ UINT32 Depth; ///< the position on the chain, zero is CPU host
+ UINT32 Reserved1; ///< Reserved.
+} HT_EVENT_DATA_OPT_REQUIRED_CAP;
+
+/// For event ::HT_EVENT_OPT_UNUSED_LINKS
+typedef struct {
+ UINT32 NodeA; ///< One of the nodes connected
+ UINT32 LinkA; ///< its unusable link
+ UINT32 NodeB; ///< The other connected node
+ UINT32 LinkB; ///< its unusable link
+} HT_EVENT_DATA_OPT_UNUSED_LINKS;
+
+/// For event ::HT_EVENT_OPT_LINK_PAIR_EXCEED
+typedef struct {
+ UINT32 NodeA; ///< One of the nodes connected
+ UINT32 NodeB; ///< The other connected node
+ UINT32 MasterLink; ///< NodeA's unusable Master link
+ UINT32 AltLink; ///< NodeA's unusable Alternatelink
+} HT_EVENT_DATA_OPT_LINK_PAIR_EXCEED;
+
+/// For event ::HT_EVENT_COH_NO_TOPOLOGY.
+/// There is no routing for this system's topology.
+typedef struct {
+ UINT32 TotalNodes; ///< the number of Nodes in the unmatched topology
+ UINT32 Reserved1; ///< Reserved.
+ UINT32 Reserved2; ///< Reserved.
+ UINT32 Reserved3; ///< Reserved.
+} HT_EVENT_DATA_COH_NO_TOPOLOGY;
+
+/// For event ::HT_EVENT_COH_PROCESSOR_TYPE_MIX
+typedef struct {
+ UINT32 Node; ///< the Node from which the incompatible family was found
+ UINT32 Link; ///< the Link to the incompatible Node
+ UINT32 TotalNodes; ///< the number of Nodes found at that point
+ UINT32 Reserved1; ///< Reserved.
+} HT_EVENT_DATA_COH_PROCESSOR_TYPE_MIX;
+
+/// For event ::HT_EVENT_COH_NODE_DISCOVERED
+typedef struct {
+ UINT32 Node; ///< the Node from which the new Node was found
+ UINT32 Link; ///< the Link to the new Node
+ UINT32 NewNode; ///< the Node id of the newly discovered Node
+ UINT32 TempRoute; ///< the new Node is temporarily at this id
+} HT_EVENT_DATA_COH_NODE_DISCOVERED;
+
+/// For event ::HT_EVENT_COH_MPCAP_MISMATCH
+typedef struct {
+ UINT32 Node; ///< the Node from which condition was observed
+ UINT32 Link; ///< the Link on the current Node
+ UINT32 SysMpCap; ///< the current aggregate system capability (the minimum found so far)
+ UINT32 TotalNodes; ///< the number of Nodes found, before this was observed
+} HT_EVENT_DATA_COH_MP_CAP_MISMATCH;
+
+/*----------------------------------------------------------------------------------------*/
+/* Event specific Notify functions.
+ */
+
+VOID
+NotifyAlertHwSyncFlood (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyAlertHwHtCrc (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 LaneMask,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyErrorNcohBusMaxExceed (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Bus,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyErrorNcohCfgMapExceed (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyErrorNcohBuidExceed (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Depth,
+ IN UINT8 Id,
+ IN UINT8 Units,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyErrorNcohDeviceFailed (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Depth,
+ IN UINT8 Id,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyInfoNcohAutoDepth (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Depth,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyWarningOptRequiredCapRetry (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Depth,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyWarningOptRequiredCapGen3 (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Depth,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyWarningOptUnusedLinks (
+ IN UINT32 NodeA,
+ IN UINT32 LinkA,
+ IN UINT32 NodeB,
+ IN UINT32 LinkB,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyWarningOptLinkPairExceed (
+ IN UINT32 NodeA,
+ IN UINT32 NodeB,
+ IN UINT32 MasterLink,
+ IN UINT32 AltLink,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyErrorCohNoTopology (
+ IN UINT8 Nodes,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyFatalCohProcessorTypeMix (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Nodes,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyInfoCohNodeDiscovered (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 NewNode,
+ IN UINT8 TempRoute,
+ IN STATE_DATA *State
+ );
+
+VOID
+NotifyFatalCohMpCapMismatch (
+ IN UINT8 Node,
+ IN UINT8 Link,
+ IN UINT8 Cap,
+ IN UINT8 Nodes,
+ IN STATE_DATA *State
+ );
+
+#endif /* _HT_NOTIFY_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/HT/htTopologies.h b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htTopologies.h
new file mode 100644
index 0000000..421d398
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/HT/htTopologies.h
@@ -0,0 +1,71 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Provide selection of available topologies.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ */
+/*
+*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+#ifndef _HT_TOPOLOGIES_H_
+#define _HT_TOPOLOGIES_H_
+
+extern CONST UINT8 ROMDATA amdHtTopologySingleNode[];
+extern CONST UINT8 ROMDATA amdHtTopologyDualNode[];
+extern CONST UINT8 ROMDATA amdHtTopologyThreeLine[];
+extern CONST UINT8 ROMDATA amdHtTopologyTriangle[];
+extern CONST UINT8 ROMDATA amdHtTopologyFourLine[];
+extern CONST UINT8 ROMDATA amdHtTopologyFourStar[];
+extern CONST UINT8 ROMDATA amdHtTopologyFourDegenerate[];
+extern CONST UINT8 ROMDATA amdHtTopologyFourSquare[];
+extern CONST UINT8 ROMDATA amdHtTopologyFourKite[];
+extern CONST UINT8 ROMDATA amdHtTopologyFourFully[];
+extern CONST UINT8 ROMDATA amdHtTopologyFiveFully[];
+extern CONST UINT8 ROMDATA amdHtTopologyFiveTwistedLadder[];
+extern CONST UINT8 ROMDATA amdHtTopologySixFully[];
+extern CONST UINT8 ROMDATA amdHtTopologySixDoubloonLower[];
+extern CONST UINT8 ROMDATA amdHtTopologySixDoubloonUpper[];
+extern CONST UINT8 ROMDATA amdHtTopologySixTwistedLadder[];
+extern CONST UINT8 ROMDATA amdHtTopologySevenFully[];
+extern CONST UINT8 ROMDATA amdHtTopologySevenTwistedLadder[];
+extern CONST UINT8 ROMDATA amdHtTopologyEightFully[];
+extern CONST UINT8 ROMDATA amdHtTopologyEightDoubloon[];
+extern CONST UINT8 ROMDATA amdHtTopologyEightTwistedLadder[];
+extern CONST UINT8 ROMDATA amdHtTopologyEightStraightLadder[];
+extern CONST UINT8 ROMDATA amdHtTopologySixTwinTriangles[];
+extern CONST UINT8 ROMDATA amdHtTopologyEightTwinFullyFourWays[];
+
+#endif // _HT_TOPOLOGIES_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Control/IdsLib32.asm b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Control/IdsLib32.asm
new file mode 100644
index 0000000..6d2c0b1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Control/IdsLib32.asm
@@ -0,0 +1,335 @@
+;/**
+; * @file
+; *
+; * Ids Assembly library 32bit
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project: AGESA
+; * @e sub-project: IDS
+; * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+; */
+;*****************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*****************************************************************************
+
+.586p
+.model flat
+ASSUME FS:NOTHING
+.code
+public IdsDelay
+IdsDelay PROC NEAR C USES EAX EDX
+Local targetedx:dword, targeteax:dword
+ rdtsc
+;set target time
+ add eax,1500000000
+ adc edx,0
+ mov targetedx,edx
+ mov targeteax,eax
+
+ rdtsc
+;set "Si!=0" skip below loop
+ .while(1)
+ .if(si != 0)
+ jmp delay_exit
+ .endif
+ .if(edx > targetedx)
+ jmp delay_exit
+ .elseif (edx == targetedx)
+ .if(eax > targeteax)
+ jmp delay_exit
+ .endif
+ .endif
+ rdtsc
+ .endw
+delay_exit:
+ ret
+IdsDelay ENDP
+;/*++
+;
+;Routine Description:
+;
+; IdsErrorStop -- Function for Assert
+;
+;Arguments:
+; Filecode
+;
+;Returns:
+;
+; None
+;
+;--*/
+public IdsErrorStop
+IdsErrorStop PROC NEAR C filecode:dword
+local tmpebx:dword,tmpedx:dword
+ pushad
+
+ mov si,0 ; Si is used as control flag, "Si!=0" skip postcode loop
+; send debug port 1st, then fire SimNow breakpoint
+ mov ax, 0deadh
+ out 0e0h, ax
+ mov eax, filecode
+ out 84h, eax
+ mov eax, 0BACCD00Bh ; Backdoor in SimNow
+ mov ebx, 2 ; Select breakpoint feature
+ cpuid
+
+ mov ebx,0dead0000h
+ mov edx,filecode
+ ror edx,16
+ mov bx,dx
+ mov dx,0
+;ebx:edx = deadxxxxyyyy0000 xxxx is the filecode yyyy is the line num
+ mov tmpebx,ebx
+ mov tmpedx,edx
+
+ xor eax,eax
+ mov cl,6
+
+ .while((cl != 0) && (si == 0))
+ .if(cl <= 2)
+ shld eax,edx,8
+ shl edx,8
+ .else
+ shld eax,ebx,8
+ shl ebx,8
+ .endif
+
+ out 80h,eax
+ call IdsDelay
+ dec cl
+ .if(cl == 0)
+ mov cl,6
+ mov ebx,tmpebx
+ mov edx,tmpedx
+ .endif
+ .endw
+
+ popad
+ xor eax,eax
+ ret
+IdsErrorStop endp
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; * Stop CPU
+; *
+; *
+; *
+; */
+IDS_STOP_HERE MACRO
+@@:
+ jmp short @b
+ENDM
+
+;======================================================================
+; IdsExceptionHandler: Simply performs a jmp $ and IRET.
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; None
+;
+;======================================================================
+PUBLIC _IdsExceptionHandler
+PUBLIC _SizeIdtDescriptor
+PUBLIC _SizeTotalIdtDescriptors
+
+; Size of each exception MUST be the same
+Exception00:
+ push eax
+ mov al, 00h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception01:
+ push eax
+ mov al, 01h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception02:
+ push eax
+ mov al, 02h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception03:
+ push eax
+ mov al, 03h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception04:
+ push eax
+ mov al, 04h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception05:
+ push eax
+ mov al, 05h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception06:
+ push eax
+ mov al, 06h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception07:
+ push eax
+ mov al, 07h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception08:
+ push eax
+ mov al, 08h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception09:
+ push eax
+ mov al, 09h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception10:
+ push eax
+ mov al, 10h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception11:
+ push eax
+ mov al, 11h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception12:
+ push eax
+ mov al, 12h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception13:
+ push eax
+ mov al, 13h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception14:
+ push eax
+ mov al, 14h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception15:
+ push eax
+ mov al, 15h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception16:
+ push eax
+ mov al, 16h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception17:
+ push eax
+ mov al, 17h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception18:
+ push eax
+ mov al, 18h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception19:
+ push eax
+ mov al, 19h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception20:
+ push eax
+ mov al, 20h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception21:
+ push eax
+ mov al, 21h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception22:
+ push eax
+ mov al, 22h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception23:
+ push eax
+ mov al, 23h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception24:
+ push eax
+ mov al, 24h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception25:
+ push eax
+ mov al, 25h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception26:
+ push eax
+ mov al, 26
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception27:
+ push eax
+ mov al, 27h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception28:
+ push eax
+ mov al, 28h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception29:
+ push eax
+ mov al, 29h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception30:
+ push eax
+ mov al, 30h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception31:
+ push eax
+ mov al, 31h
+ jmp near ptr CommonHandler
+CommonHandler:
+ out 80h, al
+ pop eax
+ IDS_STOP_HERE
+ iretd
+
+_IdsExceptionHandler dq offset Exception00
+_SizeIdtDescriptor dd (offset Exception01 - offset Exception00)
+_SizeTotalIdtDescriptors dd (offset CommonHandler - offset Exception00)
+
+END
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Control/IdsLib64.asm b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Control/IdsLib64.asm
new file mode 100644
index 0000000..a6a97a2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Control/IdsLib64.asm
@@ -0,0 +1,342 @@
+;/**
+; * @file
+; *
+; * Ids Assembly library 64bit
+; *
+; *
+; * @xrefitem bom "File Content Label" "Release Content"
+; * @e project: AGESA
+; * @e sub-project: IDS
+; * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+; */
+;*****************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*****************************************************************************
+
+.code
+IdsDelay PROC
+ push rax
+ push rdx
+ push rbx
+ xor rax,rax
+ xor rdx,rdx
+ rdtsc
+;set target time
+ add eax,1500000000
+ adc edx,0
+ shl rdx,32
+ add rdx,rax
+ mov rbx,rdx
+;rbx store the target
+;set "Si!=0" skip below loop
+__loop:
+ cmp si,0
+ jnz __loopexit
+ rdtsc
+ shl rdx,32
+ add rdx,rax
+ cmp rdx,rbx
+ jae __loopexit
+ jmp __loop
+__loopexit:
+ pop rbx
+ pop rdx
+ pop rax
+ ret
+IdsDelay ENDP
+;/*++
+;
+;Routine Description:
+;
+; IdsErrorStop -- Function for Assert
+;
+;Arguments:
+; Filecode
+;
+;Returns:
+;
+; None
+;
+;--*/
+public IdsErrorStop
+IdsErrorStop PROC
+;As x64 calling convention RCX is used as input parameters
+ push rcx
+ push rbx
+ push si
+ push dx
+ push rbx
+
+ mov si,0 ; Si is used as control flag, "Si!=0" skip postcode loop
+; send debug port 1st, then fire SimNow breakpoint
+ mov ax, 0deadh
+ out 0e0h, ax
+ mov eax, ecx
+ out 84h, eax
+ mov eax, 0BACCD00Bh ; Backdoor in SimNow
+ mov ebx, 2 ; Select breakpoint feature
+ cpuid
+
+ mov rax,0dead00000000h
+ or rcx,rax
+;rcx= 0dead__FILECODE
+ shl rcx,16
+;rcx= 0dead__FILECODE__0000
+ mov rbx,rcx
+
+ xor rax,rax
+ mov dl,6
+
+IdsErrorStopLoop:
+ cmp dl,0
+ jz IdsErrorStopExit
+ cmp si,0
+ jnz IdsErrorStopExit
+
+ shld rax,rcx,8
+ shl rcx,8
+ out 80h,eax
+ call IdsDelay
+
+ dec dl
+ cmp dl,0
+ jnz _nextloop
+ mov dl,6
+ mov rcx,rbx
+_nextloop:
+ jmp IdsErrorStopLoop
+IdsErrorStopExit:
+ pop rbx
+ pop dx
+ pop si
+ pop rbx
+ pop rcx
+ xor rax,rax
+ ret
+IdsErrorStop endp
+
+;/*---------------------------------------------------------------------------------------*/
+;/**
+; * Stop CPU
+; *
+; *
+; *
+; */
+IDS_STOP_HERE MACRO
+@@:
+ jmp short @b
+ENDM
+
+;======================================================================
+; IdsExceptionHandler: Simply performs a jmp $ and IRET.
+;
+; In:
+; None
+;
+; Out:
+; None
+;
+; Destroyed:
+; None
+;
+;======================================================================
+PUBLIC IdsExceptionHandler
+PUBLIC SizeIdtDescriptor
+PUBLIC SizeTotalIdtDescriptors
+
+; Size of each exception MUST be the same
+Exception00:
+ push rax
+ mov al, 00h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception01:
+ push rax
+ mov al, 01h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception02:
+ push rax
+ mov al, 02h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception03:
+ push rax
+ mov al, 03h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception04:
+ push rax
+ mov al, 04h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception05:
+ push rax
+ mov al, 05h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception06:
+ push rax
+ mov al, 06h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception07:
+ push rax
+ mov al, 07h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception08:
+ push rax
+ mov al, 08h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception09:
+ push rax
+ mov al, 09h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception10:
+ push rax
+ mov al, 10h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception11:
+ push rax
+ mov al, 11h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception12:
+ push rax
+ mov al, 12h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception13:
+ push rax
+ mov al, 13h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception14:
+ push rax
+ mov al, 14h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception15:
+ push rax
+ mov al, 15h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception16:
+ push rax
+ mov al, 16h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception17:
+ push rax
+ mov al, 17h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception18:
+ push rax
+ mov al, 18h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception19:
+ push rax
+ mov al, 19h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception20:
+ push rax
+ mov al, 20h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception21:
+ push rax
+ mov al, 21h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception22:
+ push rax
+ mov al, 22h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception23:
+ push rax
+ mov al, 23h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception24:
+ push rax
+ mov al, 24h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception25:
+ push rax
+ mov al, 25h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception26:
+ push rax
+ mov al, 26
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception27:
+ push rax
+ mov al, 27h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception28:
+ push rax
+ mov al, 28h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception29:
+ push rax
+ mov al, 29h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception30:
+ push rax
+ mov al, 30h
+ jmp near ptr CommonHandler
+; Size of each exception MUST be the same
+Exception31:
+ push rax
+ mov al, 31h
+ jmp near ptr CommonHandler
+CommonHandler:
+ out 80h, al
+ pop rax
+ IDS_STOP_HERE
+ iretq
+
+IdsExceptionHandler dq offset Exception00
+SizeIdtDescriptor dd (offset Exception01 - offset Exception00)
+SizeTotalIdtDescriptors dd (offset CommonHandler - offset Exception00)
+
+END
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDebug.c b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDebug.c
new file mode 100644
index 0000000..d75bf3e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDebug.c
@@ -0,0 +1,211 @@
+/**
+ * @file
+ *
+ * AMD Integrated Debug Debug_library Routines
+ *
+ * Contains AMD AGESA debug macros and library functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+ /*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "IdsLib.h"
+#include "amdlib.h"
+#include "AMD.h"
+#include "heapManager.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "IdsDebugPrint.h"
+#include "IdsDpHdtout.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_IDS_DEBUG_IDSDEBUG_FILECODE
+
+VOID
+AmdIdsDebugPrintAssert (
+ IN UINT32 FileCode
+ );
+
+
+/*--------------------------------------------------------------------------------------*/
+/**
+ * IDS back-end code for AGESA_TESTPOINT
+ *
+ * @param[in] TestPoint Progress indicator value, see @ref AGESA_TP
+ * @param[in,out] StdHeader The Pointer of AGESA Header
+ *
+ **/
+/*--------------------------------------------------------------------------------------*/
+VOID
+IdsAgesaTestPoint (
+ IN AGESA_TP TestPoint,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ if ((TestPoint != TpIfBeforeGetIdsData) && (TestPoint != TpIfAfterGetIdsData)) {
+ // AmdIdsCtrlInitialize uses too much stack. Piping out TEST_POINT inside that function would corrupt stack
+ IDS_HDT_CONSOLE (TEST_POINT, "\n[TP:%02x]\n", TestPoint);
+ }
+ LibAmdIoWrite (AccessWidth8, IDS_DEBUG_PORT, &TestPoint, StdHeader);
+}
+
+/**
+ *
+ * HDT out Function for Assert.
+ *
+ * fire a HDTOUT Command of assert to let hdtout script do corresponding things.
+ *
+ * @param[in,out] FileCode FileCode of the line
+ *
+ **/
+VOID
+AmdIdsDebugPrintAssert (
+ IN UINT32 FileCode
+ )
+{
+// if (AmdIdsHdtOutSupport ()) {
+// IdsOutPort (HDTOUT_ASSERT, FileCode, 0);
+// }
+}
+
+
+/**
+ * IDS Backend Function for ASSERT
+ *
+ * Halt execution with stop code display. Stop Code is displayed on port 80, with rotation so that
+ * it is visible on 8, 16, or 32 bit display. The stop code is alternated with 0xDEAD on the display,
+ * to help distinguish the stop code from a post code loop.
+ * Additional features may be available if using simulation.
+ *
+ * @param[in] FileCode File code(define in FILECODE.h) mix with assert Line num.
+ *
+ * @retval TRUE No error
+ **/
+BOOLEAN
+IdsAssert (
+ IN UINT32 FileCode
+ )
+{
+ UINT32 file;
+ UINT32 line;
+
+ file = (FileCode >> 16);
+ line = (FileCode & 0xFFFF);
+ IDS_HDT_CONSOLE (MAIN_FLOW, "ASSERT on File[%x] Line[%x]\n", (UINTN) file, (UINTN) line);
+ IDS_HDT_CONSOLE_FLUSH_BUFFER (NULL);
+ IDS_HDT_CONSOLE_ASSERT (FileCode);
+// IdsErrorStop (FileCode);
+ return TRUE;
+}
+
+/**
+ * IDS Backend Function for Memory timeout control
+ *
+ * This function is used to override Memory timeout control.
+ *
+ * @param[in,out] DataPtr The Pointer of UINT8.
+ *
+ **/
+VOID
+IdsMemTimeOut (
+ IN OUT VOID *DataPtr
+ )
+{
+ UINTN i;
+
+ IDS_DEBUG_PRINT **DebugPrintList;
+
+ GetDebugPrintList ((CONST IDS_DEBUG_PRINT ***)&DebugPrintList);
+
+ for (i = 0; DebugPrintList[i] != NULL; i++) {
+ if (DebugPrintList[i]->support ()) {
+ // Turn timeout off if any Debug service is on
+ *((UINT8 *)DataPtr) = (UINT8)0;
+ }
+ }
+}
+
+/**
+ *
+ * IDS Debug Function to check the sentinels are intact
+ *
+ * This function complete heap walk and check to be performed at any time.
+ *
+ * @param[in] StdHeader Config handle for library and services.
+ *
+ * @retval TRUE No error
+ *
+ **/
+BOOLEAN
+AmdHeapIntactCheck (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ return TRUE;
+}
+
+/**
+ * Check for CAR Corruption, the performance monitor number three programed to log the CAR Corruption.
+ * Check to see if control register is enabled and then check the preformance counter and stop the system by executing
+ * IDS_ERROR_TRAP if counter has any value other than zero.
+ *
+ * @param[in,out] StdHeader The Pointer of Standard Header.
+ *
+ *
+ **/
+VOID
+IdsCarCorruptionCheck (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+
+ UINT64 Perf_Msr;
+
+ LibAmdMsrRead (MSR_PERF_CONTROL3, (UINT64*)&Perf_Msr, StdHeader);
+ if ((Perf_Msr & PERF_RESERVE_BIT_MASK) == PERF_CAR_CORRUPTION_EVENT) {
+ LibAmdMsrRead (MSR_PERF_COUNTER3, (UINT64*)&Perf_Msr, StdHeader);
+ if ((Perf_Msr != 0)) {
+ IDS_ERROR_TRAP;
+ }
+ }
+}
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDebugPrint.c b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDebugPrint.c
new file mode 100644
index 0000000..4163d82
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDebugPrint.c
@@ -0,0 +1,654 @@
+/**
+ * @file
+ *
+ * AMD Integrated Debug Print Routines
+ *
+ * Contains all functions related to IDS Debug Print
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+ /*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "IdsLib.h"
+#include "amdlib.h"
+#include "IdsDebugPrint.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_IDS_DEBUG_IDSDEBUGPRINT_FILECODE
+
+//
+// Also support coding convention rules for var arg macros
+//
+#define _INT_SIZE_OF(n) ((sizeof (n) + sizeof (UINTN) - 1) &~(sizeof (UINTN) - 1))
+typedef CHAR8 *VA_LIST;
+#undef VA_START
+#undef VA_ARG
+#undef VA_END
+#define VA_START(ap, v) (ap = (VA_LIST) & (v) + _INT_SIZE_OF (v))
+#define VA_ARG(ap, t) (*(t *) ((ap += _INT_SIZE_OF (t)) - _INT_SIZE_OF (t)))
+#define VA_END(ap) (ap = (VA_LIST) 0)
+
+#define LEFT_JUSTIFY 0x01
+#define PREFIX_SIGN 0x02
+#define PREFIX_BLANK 0x04
+#define COMMA_TYPE 0x08
+#define LONG_TYPE 0x10
+#define PREFIX_ZERO 0x20
+
+#define MAX_LOCAL_BUFFER_SIZE 512
+#define BUFFER_OVERFLOW 0xFFFF
+
+/**
+ * Check If any print service is enabled.
+ *
+ * @param[in] DebugPrintList The Pointer to print service list
+ *
+ * @retval TRUE At least on print service is enabled
+ * @retval FALSE All print service is disabled
+ *
+ **/
+STATIC BOOLEAN
+AmdIdsDebugPrintCheckSupportAll (
+ IN IDS_DEBUG_PRINT **DebugPrintList
+ )
+{
+ BOOLEAN IsSupported;
+ UINTN i;
+ IsSupported = FALSE;
+ for (i = 0; DebugPrintList[i] != NULL; i++) {
+ if (DebugPrintList[i]->support ()) {
+ IsSupported = TRUE;
+ }
+ }
+ return IsSupported;
+}
+
+/**
+ * Parses flag and width information from theFormat string and returns the next index
+ * into the Format string that needs to be parsed. See file headed for details of Flag and Width.
+ *
+ * @param[in] Format Current location in the AvSPrint format string.
+ * @param[out] Flags Returns flags
+ * @param[out] Width Returns width of element
+ * @param[out] Marker Vararg list that may be partially consumed and returned.
+ *
+ * @retval Pointer indexed into the Format string for all the information parsed by this routine.
+ *
+ **/
+STATIC CHAR8 *
+GetFlagsAndWidth (
+ IN CHAR8 *Format,
+ OUT UINTN *Flags,
+ OUT UINTN *Width,
+ IN OUT VA_LIST *Marker
+ )
+{
+ UINTN Count;
+ BOOLEAN Done;
+
+ *Flags = 0;
+ *Width = 0;
+ for (Done = FALSE; !Done; ) {
+ Format++;
+
+ switch (*Format) {
+
+ case '-':
+ *Flags |= LEFT_JUSTIFY;
+ break;
+ case '+':
+ *Flags |= PREFIX_SIGN;
+ break;
+ case ' ':
+ *Flags |= PREFIX_BLANK;
+ break;
+ case ',':
+ *Flags |= COMMA_TYPE;
+ break;
+ case 'L':
+ case 'l':
+ *Flags |= LONG_TYPE;
+ break;
+
+ case '*':
+ *Width = VA_ARG (*Marker, UINTN);
+ break;
+
+ case '0':
+ *Flags |= PREFIX_ZERO;
+ break;
+
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ case '8':
+ case '9':
+ Count = 0;
+ do {
+ Count = (Count * 10) + *Format - '0';
+ Format++;
+ } while ((*Format >= '0') && (*Format <= '9'));
+ Format--;
+ *Width = Count;
+ break;
+
+ default:
+ Done = TRUE;
+ }
+ }
+ return Format;
+}
+
+CHAR8 STATIC HexStr[] = { '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' };
+extern CONST IDS_DEBUG_PRINT* ROMDATA IdsDebugPrint[];
+
+/**
+ *
+ * @param[in,out] Value - Hex value to convert to a string in Buffer.
+ *
+ *
+ */
+VOID
+GetDebugPrintList (
+ IN OUT CONST IDS_DEBUG_PRINT ***pIdsDebugPrintListPtr
+ )
+{
+ *pIdsDebugPrintListPtr = &IdsDebugPrint[0];
+}
+
+/**
+ *
+ * @param[in,out] Buffer Location to place ascii hex string of Value.
+ * @param[in] Value - Hex value to convert to a string in Buffer.
+ * @param[in] Flags - Flags to use in printing Hex string, see file header for details.
+ * @param[in] Width - Width of hex value.
+ * @param[in,out] BufferSize - Size of input buffer
+ *
+ * @retval Number of characters printed.
+ **/
+
+STATIC UINTN
+ValueToHexStr (
+ IN OUT CHAR8 *Buffer,
+ IN UINT64 Value,
+ IN UINTN Flags,
+ IN UINTN Width,
+ IN OUT UINTN *BufferSize
+ )
+{
+ CHAR8 TempBuffer[30];
+ CHAR8 *TempStr;
+ CHAR8 Prefix;
+ CHAR8 *BufferPtr;
+ UINTN Count;
+ UINTN Index;
+
+ TempStr = TempBuffer;
+ BufferPtr = Buffer;
+ //
+ // Count starts at one since we will null terminate. Each iteration of the
+ // loop picks off one nibble. Oh yea TempStr ends up backwards
+ //
+ Count = 0;
+ do {
+ *(TempStr++) = HexStr[Value & 0x0f];
+ Value >>= 4;
+ Count++;
+ } while (Value != 0);
+
+ if (Flags & PREFIX_ZERO) {
+ Prefix = '0';
+ } else if (!(Flags & LEFT_JUSTIFY)) {
+ Prefix = ' ';
+ } else {
+ Prefix = 0x00;
+ }
+ for (Index = Count; Index < Width; Index++) {
+ *(TempStr++) = Prefix;
+ }
+
+ //
+ // Reverse temp string into Buffer.
+ //
+ while (TempStr != TempBuffer) {
+ (*BufferSize)--;
+ if (*BufferSize == 0) {
+ return BUFFER_OVERFLOW;
+ }
+ *(BufferPtr++) = *(--TempStr);
+ }
+
+ *BufferPtr = 0;
+ return Index;
+}
+
+/**
+ * Prints a Value as a decimal number in Buffer
+ *
+ * @param[in] Buffer Location to place ascii decimal number string of Value.
+ * @param[in] Value Decimal value to convert to a string in Buffer.
+ * @param[in] Flags Flags to use in printing decimal string, see file header for details.
+ * @param[in,out] BufferSize Size of input buffer
+ *
+ * @retval Number of characters printed.
+ *
+**/
+
+STATIC UINTN
+ValueToString (
+ IN OUT CHAR8 *Buffer,
+ IN INT32 Value,
+ IN UINTN Flags,
+ IN OUT UINTN *BufferSize
+ )
+{
+ CHAR8 TempBuffer[30];
+ CHAR8 *TempStr;
+ CHAR8 *BufferPtr;
+ UINTN Count;
+ UINTN Remainder;
+
+ ASSERT (*BufferSize);
+ TempStr = TempBuffer;
+ BufferPtr = Buffer;
+ Count = 0;
+
+ if (Value < 0) {
+ (*BufferSize)--;
+ if (*BufferSize == 0) {
+ return BUFFER_OVERFLOW;
+ }
+ *(BufferPtr++) = '-';
+ Value = - Value;
+ Count++;
+ }
+
+ do {
+ Remainder = Value % 10;
+ Value /= 10;
+ *(TempStr++) = (CHAR8)(Remainder + '0');
+ Count++;
+ if ((Flags & COMMA_TYPE) == COMMA_TYPE) {
+ if (Count % 3 == 0) {
+ *(TempStr++) = ',';
+ }
+ }
+ } while (Value != 0);
+
+ //
+ // Reverse temp string into Buffer.
+ //
+ while (TempStr != TempBuffer) {
+ (*BufferSize)--;
+ if (*BufferSize == 0) {
+ return BUFFER_OVERFLOW;
+ }
+ *(BufferPtr++) = *(--TempStr);
+ }
+
+ *BufferPtr = 0;
+ return Count;
+}
+
+/**
+ * Worker function for print string to buffer
+ *
+ * @param[in] Flag - filter flag
+ * @param[in] *Format - format string
+ * @param[in] Marker - Variable parameter
+ * @param[in] Buffer - Point to input buffer
+ * @param[in] BufferSize - Buffer size
+ * @param[out] OutputStringLen - output string length, include '\0' at the end
+ *
+ * @retval IDS_DEBUG_PRINT_SUCCESS succeed
+ * @retval IDS_DEBUG_PRINT_BUFFER_OVERFLOW input buffer overflow
+**/
+STATIC IDS_DEBUG_PRINT_STATUS
+AmdIdsDebugPrintWorker (
+ IN CHAR8 *Format,
+ IN VA_LIST Marker,
+ IN CHAR8 *Buffer,
+ IN UINTN BufferSize,
+ OUT UINTN *OutputStringLen
+ )
+{
+ UINTN Index;
+ UINTN Length;
+ UINTN Flags;
+ UINTN Width;
+ UINT64 Value;
+ CHAR8 *AsciiStr;
+
+ //Init the default Value
+ Index = 0;
+ //
+ // Process format string
+ //
+ for (; (*Format != '\0') && (BufferSize > 0); Format++) {
+ if (*Format != '%') {
+ Buffer[Index++] = *Format;
+ BufferSize--;
+ } else {
+ Format = GetFlagsAndWidth (Format, &Flags, &Width, &Marker);
+ switch (*Format) {
+ case 'X':
+ Flags |= PREFIX_ZERO;
+ Width = sizeof (UINT64) * 2;
+ //
+ // break skipped on purpose
+ //
+ case 'x':
+ if ((Flags & LONG_TYPE) == LONG_TYPE) {
+ Value = VA_ARG (Marker, UINT64);
+ } else {
+ Value = VA_ARG (Marker, UINTN);
+ }
+ Length = ValueToHexStr (&Buffer[Index], Value, Flags, Width, &BufferSize);
+ if (Length != BUFFER_OVERFLOW) {
+ Index += Length;
+ } else {
+ return IDS_DEBUG_PRINT_BUFFER_OVERFLOW;
+ }
+ break;
+
+ case 'd':
+ Value = (UINTN)VA_ARG (Marker, UINT32);
+ Length = ValueToString (&Buffer[Index], (UINT32)Value, Flags, &BufferSize);
+ if (Length != BUFFER_OVERFLOW) {
+ Index += Length;
+ } else {
+ return IDS_DEBUG_PRINT_BUFFER_OVERFLOW;
+ }
+
+ break;
+
+ case 's':
+ case 'S':
+ AsciiStr = (CHAR8 *)VA_ARG (Marker, CHAR8 *);
+ while (*AsciiStr != '\0') {
+ BufferSize--;
+ if (BufferSize == 0) {
+ return IDS_DEBUG_PRINT_BUFFER_OVERFLOW;
+ }
+ Buffer[Index++] = *AsciiStr++;
+ }
+ break;
+
+ case 'c':
+ BufferSize--;
+ if (BufferSize == 0) {
+ return IDS_DEBUG_PRINT_BUFFER_OVERFLOW;
+ }
+ Buffer[Index++] = (CHAR8)VA_ARG (Marker, UINTN);
+ break;
+
+ case 'v':
+ ASSERT (FALSE); // %v is no longer supported
+ break;
+
+ case '%':
+ BufferSize--;
+ if (BufferSize == 0) {
+ return IDS_DEBUG_PRINT_BUFFER_OVERFLOW;
+ }
+ Buffer[Index++] = *Format;
+ break;
+
+ default:
+ //
+ // if the type is unknown print it to the screen
+ //
+ BufferSize--;
+ if (BufferSize == 0) {
+ return IDS_DEBUG_PRINT_BUFFER_OVERFLOW;
+ }
+ Buffer[Index++] = '%';
+
+ BufferSize--;
+ if (BufferSize == 0) {
+ return IDS_DEBUG_PRINT_BUFFER_OVERFLOW;
+ }
+ Buffer[Index++] = *Format;
+ break;
+ }
+ }
+ }
+ if (BufferSize == 0) {
+ return IDS_DEBUG_PRINT_BUFFER_OVERFLOW;
+ }
+ //Mark the end of word
+ Buffer[Index] = 0;
+ *OutputStringLen = Index;
+ return IDS_DEBUG_PRINT_SUCCESS;
+}
+
+
+/**
+ * Insert Overflow warning to the tail of output
+ *
+ * @param[in] Buffer - Point to input buffer
+ * @param[in] BufferSize - Buffer size
+ *
+**/
+STATIC VOID
+InsertOverflowWarningMessage (
+ IN CHAR8 *Buffer,
+ IN UINTN BufferSize
+ )
+{
+ CHAR8 *Destination;
+ CHAR8 WarningString[] = "\n#BUFFER OVERFLOW#\n";
+ AMD_CONFIG_PARAMS StdHeader;
+
+ Destination = Buffer + BufferSize - sizeof (WarningString);
+ LibAmdMemCopy (Destination, WarningString, sizeof (WarningString), &StdHeader);
+}
+
+/**
+ * Process debug string
+ *
+ * @param[in] Flag - filter flag
+ * @param[in] *Format - format string
+ * @param[in] Marker - Variable parameter
+ *
+**/
+STATIC VOID
+AmdIdsDebugPrintProcess (
+ IN UINT64 Flag,
+ IN CHAR8 *Format,
+ IN VA_LIST Marker
+ )
+{
+ UINT64 Filter;
+ CHAR8 LocalBuffer[MAX_LOCAL_BUFFER_SIZE];
+ UINTN OutPutStringLen;
+ IDS_DEBUG_PRINT **DebugPrintList;
+ IDS_DEBUG_PRINT_PRIVATE_DATA debugPrintPrivate;
+ UINT8 i;
+
+
+ GetDebugPrintList ((CONST IDS_DEBUG_PRINT ***)&DebugPrintList);
+ if (AmdIdsDebugPrintCheckSupportAll (DebugPrintList)) {
+ if (AmdIdsDebugPrintWorker (Format, Marker, &LocalBuffer[0], sizeof (LocalBuffer), &OutPutStringLen) == IDS_DEBUG_PRINT_BUFFER_OVERFLOW) {
+ InsertOverflowWarningMessage (&LocalBuffer[0], sizeof (LocalBuffer));
+ OutPutStringLen = sizeof (LocalBuffer);
+ }
+
+ //init input
+ debugPrintPrivate.saveContext = FALSE;
+
+ for (i = 0; DebugPrintList[i] != NULL; i++) {
+ if (DebugPrintList[i]->support ()) {
+ Filter = IDS_DEBUG_PRINT_MASK;
+ //Get Customize filter (Option)
+ DebugPrintList[i]->customfilter (&Filter);
+ if (Flag & Filter) {
+ //Init Private Date (Option)
+ DebugPrintList[i]->InitPrivateData (Flag, &debugPrintPrivate);
+ //Print Physical Layer
+ DebugPrintList[i]->print (&LocalBuffer[0], OutPutStringLen, &debugPrintPrivate);
+ }
+ }
+ }
+ }
+}
+
+/**
+ * Prints string to debug host like printf in C
+ *
+ * @param[in] Flag - filter flag
+ * @param[in] *Format - format string
+ * @param[in] ... Variable parameter
+ *
+**/
+VOID
+AmdIdsDebugPrint (
+ IN UINT64 Flag,
+ IN CONST CHAR8 *Format,
+ IN ...
+ )
+{
+ VA_LIST Marker;
+ VA_START (Marker, Format); //init marker to 1st dynamic parameters.
+ AmdIdsDebugPrintProcess (Flag, (CHAR8 *)Format, Marker);
+ VA_END (Marker);
+}
+
+/**
+ * Prints memory debug strings
+ *
+ * @param[in] *Format - format string
+ * @param[in] ... Variable parameter
+ *
+**/
+VOID
+AmdIdsDebugPrintMem (
+ IN CHAR8 *Format,
+ IN ...
+ )
+{
+ VA_LIST Marker;
+ VA_START (Marker, Format); //init marker to 1st dynamic parameters.
+ AmdIdsDebugPrintProcess (MEM_FLOW, Format, Marker);
+ VA_END (Marker);
+}
+
+/**
+ * Prints CPU debug strings
+ *
+ * @param[in] *Format - format string
+ * @param[in] ... Variable parameter
+ *
+**/
+VOID
+AmdIdsDebugPrintCpu (
+ IN CHAR8 *Format,
+ IN ...
+ )
+{
+ VA_LIST Marker;
+ VA_START (Marker, Format); //init marker to 1st dynamic parameters.
+ AmdIdsDebugPrintProcess (CPU_TRACE, Format, Marker);
+ VA_END (Marker);
+}
+
+
+/**
+ * Prints HT debug strings
+ *
+ * @param[in] *Format - format string
+ * @param[in] ... Variable parameter
+ *
+**/
+VOID
+AmdIdsDebugPrintHt (
+ IN CHAR8 *Format,
+ IN ...
+ )
+{
+ VA_LIST Marker;
+ VA_START (Marker, Format); //init marker to 1st dynamic parameters.
+ AmdIdsDebugPrintProcess (HT_TRACE, Format, Marker);
+ VA_END (Marker);
+}
+
+
+/**
+ * Prints GNB debug strings
+ *
+ * @param[in] *Format - format string
+ * @param[in] ... Variable parameter
+ *
+**/
+VOID
+AmdIdsDebugPrintGnb (
+ IN CHAR8 *Format,
+ IN ...
+ )
+{
+ VA_LIST Marker;
+ VA_START (Marker, Format); //init marker to 1st dynamic parameters.
+ AmdIdsDebugPrintProcess (GNB_TRACE, Format, Marker);
+ VA_END (Marker);
+}
+
+/**
+ * Prints debug strings in any condition
+ *
+ * @param[in] *Format - format string
+ * @param[in] ... Variable parameter
+ *
+**/
+VOID
+AmdIdsDebugPrintAll (
+ IN CHAR8 *Format,
+ IN ...
+ )
+{
+ VA_LIST Marker;
+ VA_START (Marker, Format); //init marker to 1st dynamic parameters.
+ AmdIdsDebugPrintProcess (TRACE_MASK_ALL, Format, Marker);
+ VA_END (Marker);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDebugPrint.h b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDebugPrint.h
new file mode 100644
index 0000000..fc1ac8d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDebugPrint.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Integrated Debug Print Routines
+ *
+ * Contains all functions related to IDS Debug Print
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _IDS_DEBUGPRINT_H_
+#define _IDS_DEBUGPRINT_H_
+
+///Debug String End flag
+#define DEBUG_STRING_END_FLAG (0x0)
+/// return status for debug print
+typedef enum {
+ IDS_DEBUG_PRINT_SUCCESS = 0, ///< success
+ IDS_DEBUG_PRINT_BUFFER_OVERFLOW, ///< Bufer overflow
+} IDS_DEBUG_PRINT_STATUS;
+
+/// Private datas for debug print
+typedef struct _IDS_DEBUG_PRINT_PRIVATE_DATA {
+ BOOLEAN saveContext; /// save context
+} IDS_DEBUG_PRINT_PRIVATE_DATA;
+
+typedef BOOLEAN (*PF_IDS_DEBUG_PRINT_SUPPORT) (VOID);
+typedef BOOLEAN (*PF_IDS_DEBUG_PRINT_FILTER) (UINT64 *Filter);
+typedef VOID (*PF_IDS_DEBUG_PRINT_PRINT) (CHAR8 *Buffer, UINTN BufferSize, IDS_DEBUG_PRINT_PRIVATE_DATA *debugPrintPrivate);
+typedef VOID (*PF_IDS_DEBUG_INIT_PRIVATE_DATA) (UINT64 flag, IDS_DEBUG_PRINT_PRIVATE_DATA *debugPrintPrivate);
+
+/// Debug print Hw layer service class
+typedef struct _IDS_DEBUG_PRINT {
+ PF_IDS_DEBUG_PRINT_SUPPORT support; ///Check if support
+ PF_IDS_DEBUG_PRINT_FILTER customfilter; ///Get if any customize filters
+ PF_IDS_DEBUG_INIT_PRIVATE_DATA InitPrivateData; ///Init private data
+ PF_IDS_DEBUG_PRINT_PRINT print; ///Print data to Hw layer
+} IDS_DEBUG_PRINT;
+
+
+VOID
+GetDebugPrintList (
+ IN OUT CONST IDS_DEBUG_PRINT ***pIdsDebugPrintListPtr
+ );
+
+
+#endif //_IDS_DEBUGPRINT_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDpHdtout.c b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDpHdtout.c
new file mode 100644
index 0000000..bde0514
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDpHdtout.c
@@ -0,0 +1,755 @@
+/**
+ * @file
+ *
+ * AMD Integrated Debug Debug_library Routines
+ *
+ * Contains all functions related to HDTOUT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+ /*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "IdsLib.h"
+#include "amdlib.h"
+#include "AMD.h"
+#include "heapManager.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "IdsDebugPrint.h"
+#include "IdsDpHdtout.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_IDS_DEBUG_IDSDPHDTOUT_FILECODE
+
+/**
+ * Check if String contain the substring
+ *
+ * @param[in] String Pointer of string.
+ * @param[in] Substr Pointer of sub string.
+ *
+ * @retval TRUE S2 is substring of S1
+ * @retval FALSE S2 isn't substring of S1
+ *
+**/
+STATIC BOOLEAN
+AmdIdsSubStr (
+ IN CHAR8 *String,
+ IN CHAR8 *Substr
+ )
+{
+ UINT16 i;
+ UINT16 j;
+
+ for (i = 0; String[i] != 0 ; i++) {
+ for (j = 0; (Substr[j] != 0) && (Substr[j] == String[i + j]); j++) {
+ }
+ if (Substr[j] == 0) {
+ return TRUE;
+ }
+ }
+
+ return FALSE;
+}
+
+/**
+ * Determine whether IDS console is enabled.
+ *
+ * @param[in,out] pHdtoutHeader Address of hdtout header pointer
+ * @param[in,out] StdHeader The Pointer of AGESA Header
+ *
+ * @retval TRUE pHdtoutHeader Non zero
+ * @retval FALSE pHdtoutHeader is NULL
+ *
+ **/
+STATIC BOOLEAN
+AmdIdsHdtoutGetHeader (
+ IN OUT HDTOUT_HEADER **pHdtoutHeaderPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Dr3Reg;
+ HDTOUT_HEADER *HdtoutHeaderPtr;
+ LibAmdReadCpuReg (DR3_REG, &Dr3Reg);
+ HdtoutHeaderPtr = (HDTOUT_HEADER *) (UINTN) Dr3Reg;
+ if ((HdtoutHeaderPtr != NULL) && (HdtoutHeaderPtr->Signature == HDTOUT_HEADER_SIGNATURE)) {
+ *pHdtoutHeaderPtr = HdtoutHeaderPtr;
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+/**
+ * Determine whether IDS console is enabled.
+ *
+ * @param[in,out] IdsConsole The Pointer of Ids console data
+ *
+ * @retval TRUE Ids console is enabled.
+ * @retval FALSE Ids console is disabled.
+ *
+ **/
+BOOLEAN
+AmdIdsHdtOutSupport (
+ VOID
+ )
+{
+ BOOLEAN Result;
+ UINT32 DR2reg;
+
+ Result = FALSE;
+
+ LibAmdReadCpuReg (DR2_REG, &DR2reg);
+ if (DR2reg == 0x99CC) {
+ Result = TRUE;
+ }
+
+ return Result;
+}
+
+/**
+ * Get HDTOUT customize Filter
+ *
+ * @param[in,out] Filter Filter do be filled
+ *
+ * @retval TRUE Alway return true, for HDTOUT has its own filter mechanism
+ *
+ **/
+STATIC BOOLEAN
+AmdIdsHdtOutGetFilter (
+ IN OUT UINT64 *Filter
+ )
+{
+ HDTOUT_HEADER *HdtoutHeaderPtr;
+
+ if (AmdIdsHdtoutGetHeader (&HdtoutHeaderPtr, NULL) == TRUE) {
+ *Filter = HdtoutHeaderPtr->ConsoleFilter;
+ }
+ return TRUE;
+}
+
+/**
+ *
+ * Initial register setting used for HDT out Function.
+ *
+ *
+ * @param[in,out] StdHeader The Pointer of AGESA Header
+ *
+ **/
+STATIC VOID
+AmdIdsHdtOutRegisterRestore (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 CR4reg;
+ UINT64 SMsr;
+
+ LibAmdMsrRead (0xC001100A, (UINT64 *)&SMsr, StdHeader);
+ SMsr &= ~BIT0;
+ LibAmdMsrWrite (0xC001100A, (UINT64 *)&SMsr, StdHeader);
+
+ LibAmdWriteCpuReg (DR2_REG, 0);
+ LibAmdWriteCpuReg (DR3_REG, 0);
+ LibAmdWriteCpuReg (DR7_REG, 0);
+
+ LibAmdReadCpuReg (CR4_REG, &CR4reg);
+ LibAmdWriteCpuReg (CR4_REG, CR4reg & (~BIT3));
+
+}
+
+/**
+ *
+ * Restore register setting used for HDT out Function.
+ *
+ *
+ * @param[in,out] StdHeader The Pointer of AGESA Header
+ *
+ **/
+STATIC VOID
+AmdIdsHdtOutRegisterInit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 CR4reg;
+ UINT64 SMsr;
+
+ LibAmdMsrRead (0xC001100A, (UINT64 *)&SMsr, StdHeader);
+ SMsr |= 1;
+ LibAmdMsrWrite (0xC001100A, (UINT64 *)&SMsr, StdHeader);
+
+ LibAmdWriteCpuReg (DR2_REG, 0x99CC);
+
+ LibAmdWriteCpuReg (DR7_REG, 0x02000420);
+
+ LibAmdReadCpuReg (CR4_REG, &CR4reg);
+ LibAmdWriteCpuReg (CR4_REG, CR4reg | ((UINT32)1 << 3));
+}
+
+/**
+ *
+ * Initial function for HDT out Function.
+ *
+ * Init required Debug register & heap, and will also fire a HDTOUT
+ * Command to let hdtout script do corresponding things.
+ *
+ * @param[in,out] StdHeader The Pointer of AGESA Header
+ *
+ **/
+VOID
+AmdIdsHdtOutInit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ HDTOUT_HEADER HdtoutHeader;
+ UINT8 Persist;
+ AGESA_STATUS IgnoreSts;
+ HDTOUT_HEADER *pHdtoutHeader;
+
+ IDS_FUNCLIST_EXTERN ();
+ if (AmdIdsHdtOutSupport ()) {
+ AmdIdsHdtOutRegisterInit (StdHeader);
+ // Initialize HDTOUT Header
+ HdtoutHeader.Signature = HDTOUT_HEADER_SIGNATURE;
+ HdtoutHeader.Version = HDTOUT_VERSION;
+ HdtoutHeader.BufferSize = HDTOUT_DEFAULT_BUFFER_SIZE;
+ HdtoutHeader.DataIndex = 0;
+ HdtoutHeader.PrintCtrl = HDTOUT_PRINTCTRL_ON;
+ HdtoutHeader.NumBreakpointUnit = 0;
+ HdtoutHeader.FuncListAddr = (UINT32) IDS_FUNCLIST_ADDR;
+ HdtoutHeader.StatusStr[0] = 0;
+ HdtoutHeader.OutBufferMode = HDTOUT_BUFFER_MODE_ON;
+ HdtoutHeader.EnableMask = 0;
+ HdtoutHeader.ConsoleFilter = IDS_DEBUG_PRINT_MASK;
+
+ // Trigger HDTOUT breakpoint to get inputs from script
+ IdsOutPort (HDTOUT_INIT, (UINT32) &HdtoutHeader, 0);
+ // Disable AP HDTOUT if set BspOnlyFlag
+ if (HdtoutHeader.BspOnlyFlag == HDTOUT_BSP_ONLY) {
+ if (!IsBsp (StdHeader, &IgnoreSts)) {
+ AmdIdsHdtOutRegisterRestore (StdHeader);
+ return;
+ }
+ }
+ // Convert legacy EnableMask to new ConsoleFilter
+ HdtoutHeader.ConsoleFilter |= HdtoutHeader.EnableMask;
+
+ // Disable the buffer if the size is not large enough
+ if (HdtoutHeader.BufferSize < 128) {
+ HdtoutHeader.BufferSize = 0;
+ HdtoutHeader.OutBufferMode = HDTOUT_BUFFER_MODE_OFF;
+ } else {
+ HdtoutHeader.OutBufferMode = HDTOUT_BUFFER_MODE_ON;
+ }
+
+ // Check if Hdtout header have been initialed, if so it must 2nd time come here
+ if (AmdIdsHdtoutGetHeader (&pHdtoutHeader, StdHeader)) {
+ Persist = HEAP_SYSTEM_MEM;
+ } else {
+ Persist = HEAP_LOCAL_CACHE;
+ }
+
+ // Allocate heap
+ do {
+ AllocHeapParams.RequestedBufferSize = HdtoutHeader.BufferSize + sizeof (HdtoutHeader) - 2;
+ AllocHeapParams.BufferHandle = IDS_HDT_OUT_BUFFER_HANDLE;
+ AllocHeapParams.Persist = Persist;
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+ break;
+ } else {
+ IdsOutPort (HDTOUT_ERROR, HDTOUT_ERROR_HEAP_ALLOCATION, AllocHeapParams.RequestedBufferSize);
+ HdtoutHeader.BufferSize -= 256;
+ }
+ } while ((HdtoutHeader.BufferSize & 0x8000) == 0);
+ // If the buffer have been successfully allocated?
+ if ((HdtoutHeader.BufferSize & 0x8000) == 0) {
+ LibAmdWriteCpuReg (DR3_REG, (UINT32) AllocHeapParams.BufferPtr);
+ LibAmdMemCopy (AllocHeapParams.BufferPtr, &HdtoutHeader, sizeof (HdtoutHeader) - 2, StdHeader);
+ } else {
+ /// Clear DR3_REG
+ IdsOutPort ((UINT32)HDTOUT_ERROR, (UINT32)HDTOUT_ERROR_HEAP_AllOCATE_FAIL, (UINT32)IDS_DEBUG_PRINT_MASK);
+ LibAmdWriteCpuReg (DR3_REG, 0);
+ }
+ }
+}
+
+/**
+ *
+ * Flush all HDTOUT buffer data before HOB transfer
+ *
+ * @param[in,out] StdHeader The Pointer of AGESA Header
+ *
+ **/
+VOID
+AmdIdsHdtOutBufferFlush (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ HDTOUT_HEADER *HdtoutHeaderPtr ;
+
+ if (AmdIdsHdtOutSupport ()) {
+ if (AmdIdsHdtoutGetHeader (&HdtoutHeaderPtr, StdHeader)) {
+ if ((HdtoutHeaderPtr->PrintCtrl == HDTOUT_PRINTCTRL_ON) &&
+ (HdtoutHeaderPtr->OutBufferMode == HDTOUT_BUFFER_MODE_ON)) {
+ IdsOutPort (HDTOUT_PRINT, (UINT32) HdtoutHeaderPtr->Data, HdtoutHeaderPtr->DataIndex);
+ HdtoutHeaderPtr->DataIndex = 0;
+ }
+ }
+ }
+}
+
+/**
+ * Exit function for HDT out Function for each cores
+ *
+ * @param[in] Ignored no used
+ * @param[in,out] StdHeader The Pointer of AMD_CONFIG_PARAMS.
+ *
+ * @retval AGESA_SUCCESS Success
+ * @retval AGESA_ERROR meet some error
+ *
+ **/
+STATIC AGESA_STATUS
+AmdIdsHdtOutExitCoreTask (
+ IN VOID *Ignored,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ HDTOUT_HEADER *HdtoutHeaderPtr;
+
+ if (AmdIdsHdtoutGetHeader (&HdtoutHeaderPtr, StdHeader)) {
+ if ((HdtoutHeaderPtr->PrintCtrl == HDTOUT_PRINTCTRL_ON) &&
+ (HdtoutHeaderPtr->OutBufferMode == HDTOUT_BUFFER_MODE_ON)) {
+ IdsOutPort (HDTOUT_PRINT, (UINT32) HdtoutHeaderPtr->Data, HdtoutHeaderPtr->DataIndex);
+ }
+ }
+ IdsOutPort (HDTOUT_EXIT, (UINT32) HdtoutHeaderPtr, 0);
+
+ AmdIdsHdtOutRegisterRestore (StdHeader);
+
+ return AGESA_SUCCESS;
+}
+/**
+ *
+ * Exit function for HDT out Function.
+ *
+ * Restore debug register and Deallocate heap, and will also fire a HDTOUT
+ * Command to let hdtout script do corresponding things.
+ *
+ * @param[in,out] StdHeader The Pointer of AGESA Header
+ *
+ **/
+VOID
+AmdIdsHdtOutExit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ IDSAPLATETASK IdsApLateTask;
+ if (AmdIdsHdtOutSupport ()) {
+ IdsApLateTask.ApTask = (PF_IDS_AP_TASK) AmdIdsHdtOutExitCoreTask;
+ IdsApLateTask.ApTaskPara = NULL;
+ IdsAgesaRunFcnOnAllCoresLate (&IdsApLateTask, StdHeader);
+ HeapDeallocateBuffer (IDS_HDT_OUT_BUFFER_HANDLE, StdHeader);
+ }
+}
+
+/**
+ *
+ * Exit function for HDT out Function of S3 Resume
+ *
+ * Restore debug register and Deallocate heap, and will also fire a HDTOUT
+ * Command to let hdtout script do corresponding things.
+ *
+ * @param[in,out] StdHeader The Pointer of AGESA Header
+ *
+ **/
+VOID
+AmdIdsHdtOutS3Exit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS AgesaStatus;
+
+ if (AmdIdsHdtOutSupport ()) {
+ //Ap debug print exit have been done at the end of AmdInitResume, so we only BSP at here
+ AmdIdsHdtOutExitCoreTask (NULL, StdHeader);
+ if (IsBsp (StdHeader, &AgesaStatus)) {
+ HeapDeallocateBuffer (IDS_HDT_OUT_BUFFER_HANDLE, StdHeader);
+ }
+ }
+}
+/**
+ *
+ * Exit function for HDT out Function of S3 Resume
+ *
+ * Restore debug register and Deallocate heap, and will also fire a HDTOUT
+ * Command to let hdtout script do corresponding things.
+ *
+ * @param[in,out] StdHeader The Pointer of AGESA Header
+ *
+ **/
+VOID
+AmdIdsHdtOutS3ApExit (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AP_TASK TaskPtr;
+ UINT32 Ignored;
+ UINT32 BscSocket;
+ UINT32 BscCoreNum;
+ UINT32 Core;
+ UINT32 Socket;
+ UINT32 NumberOfSockets;
+ UINT32 NumberOfCores;
+ AGESA_STATUS IgnoredSts;
+
+ if (AmdIdsHdtOutSupport ()) {
+ // run code on all APs except BSP
+ TaskPtr.FuncAddress.PfApTaskI = (PF_AP_TASK_I)AmdIdsHdtOutExitCoreTask;
+ TaskPtr.DataTransfer.DataSizeInDwords = 0;
+ TaskPtr.DataTransfer.DataPtr = NULL;
+ TaskPtr.DataTransfer.DataTransferFlags = 0;
+ TaskPtr.ExeFlags = WAIT_FOR_CORE;
+
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+ IdentifyCore (StdHeader, &BscSocket, &Ignored, &BscCoreNum, &IgnoredSts);
+
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+ for (Core = 0; Core < NumberOfCores; Core++) {
+ if ((Socket != BscSocket) || (Core != BscCoreNum)) {
+ ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, &TaskPtr, StdHeader);
+ }
+ }
+ }
+ }
+ }
+ }
+}
+
+/**
+ * Print formated string with accerate buffer
+ * Flow out only when buffer will full
+ *
+ * @param[in] Buffer - Point to input buffer
+ * @param[in] BufferSize - Buffer size
+ * @param[in] HdtoutHeaderPtr - Point to Hdtout Header
+ *
+**/
+STATIC VOID
+AmdIdsHdtOutPrintWithBuffer (
+ IN CHAR8 *Buffer,
+ IN UINTN BufferSize,
+ IN HDTOUT_HEADER *HdtoutHeaderPtr
+ )
+{
+ if ((HdtoutHeaderPtr == NULL) || (Buffer == NULL)) {
+ ASSERT (FALSE);
+ return;
+ }
+
+ while (BufferSize--) {
+ if (HdtoutHeaderPtr->DataIndex >= HdtoutHeaderPtr->BufferSize) {
+ //Flow out current buffer, and clear the index
+ IdsOutPort (HDTOUT_PRINT, (UINT32) (UINTN) &HdtoutHeaderPtr->Data[0], HdtoutHeaderPtr->BufferSize);
+ HdtoutHeaderPtr->DataIndex = 0;
+ }
+ HdtoutHeaderPtr->Data[HdtoutHeaderPtr->DataIndex++] = *(Buffer++);
+ }
+}
+/**
+ * Save HDTOUT context, use for break point function
+ *
+ * @param[in] Buffer - Point to input buffer
+ * @param[in] BufferSize - Buffer size
+ * @param[in] HdtoutHeaderPtr - Point to Hdtout Header
+ *
+**/
+STATIC VOID
+AmdIdsHdtOutSaveContext (
+ IN CHAR8 *Buffer,
+ IN UINTN BufferSize,
+ IN HDTOUT_HEADER *HdtoutHeaderPtr
+ )
+{
+ UINTN i;
+ UINTN j;
+ UINTN ArrayIndex;
+ UINTN unusedPrefix;
+ UINTN ArrayLength;
+ BOOLEAN SaveStatus;
+
+ ArrayLength = 0;
+
+ // Look for the start of the first ASCII
+ for (i = 0; i < BufferSize - 1; i++) {
+ if ((Buffer[i] > 32) && (Buffer[i] < 127)) {
+ break;
+ }
+ }
+
+ unusedPrefix = i;
+ //ASSERT if no "\n" in status string
+ ASSERT (AmdIdsSubStr (&Buffer[i], (CHAR8 *)"\n"));
+
+ if (i < (BufferSize - 1)) {
+ // Match the first word in StatusStr
+ SaveStatus = FALSE;
+ for (j = 0; !SaveStatus && (HdtoutHeaderPtr->StatusStr[j] != 0); j++) {
+ for (; (Buffer[i] == HdtoutHeaderPtr->StatusStr[j]) && (i < BufferSize); i++, j++) {
+ ArrayLength++;
+ if (Buffer[i] == ' ') {
+ ArrayIndex = j;
+ for (; HdtoutHeaderPtr->StatusStr[j] != '\n'; j++) {
+ ArrayLength++;
+ }
+ // Remove old entry if it's size does not fit
+ if (ArrayLength != ((UINT32) BufferSize - unusedPrefix)) {
+ for (++j; HdtoutHeaderPtr->StatusStr[j] != 0; j++) {
+ HdtoutHeaderPtr->StatusStr[j - ArrayLength] = HdtoutHeaderPtr->StatusStr[j];
+ }
+ j = j - ArrayLength - 1;
+ i = unusedPrefix;
+ // Mark the end of string
+ HdtoutHeaderPtr->StatusStr[j + BufferSize - unusedPrefix + 1] = 0;
+ } else {
+ j = ArrayIndex - 1;
+ }
+
+ // Word match, exit for saving
+ SaveStatus = TRUE;
+ break;
+ }
+ }
+ }
+
+ // Copy string to StatusStr
+ if ((HdtoutHeaderPtr->StatusStr[j] == 0) || SaveStatus) {
+ for (; i < BufferSize; j++, i++) {
+ HdtoutHeaderPtr->StatusStr[j] = Buffer[i];
+ }
+ }
+
+ if (!SaveStatus) {
+ // Mark the end of string if not done so
+ HdtoutHeaderPtr->StatusStr[j] = 0;
+ }
+ }
+}
+
+STATIC BOOLEAN
+AmdIdsHdtOutBreakPointUnit (
+ IN OUT BREAKPOINT_UNIT **pBpunitptr,
+ IN OUT UINT32 *numBp,
+ IN HDTOUT_HEADER *HdtoutHeaderPtr,
+ IN CHAR8 *Buffer
+ )
+{
+ BOOLEAN isMatched;
+ CHAR8 *PCmpStr;
+ CHAR8 *Pbpstr;
+ BREAKPOINT_UNIT *pBpunit;
+
+ pBpunit = *pBpunitptr;
+ if ((pBpunit == NULL) ||
+ (numBp == NULL) ||
+ (HdtoutHeaderPtr == NULL) ||
+ (*numBp == 0)) {
+ ASSERT (FALSE);
+ return FALSE;
+ }
+ //Get to be compared string
+ if (pBpunit->BpFlag == IDS_HDTOUT_BPFLAG_FORMAT_STR) {
+ PCmpStr = Buffer;
+ } else {
+ PCmpStr = HdtoutHeaderPtr->StatusStr;
+ }
+ //Get BreakPoint string
+ Pbpstr = HdtoutHeaderPtr->BreakpointList + pBpunit->BpStrOffset;
+ isMatched = AmdIdsSubStr (PCmpStr, Pbpstr);
+ //Point to next one, and decrease the numbp
+ *pBpunitptr = ++pBpunit;
+ (*numBp)--;
+ return isMatched;
+}
+/**
+ * Process HDTOUT breakpoint
+ *
+ * @param[in] Buffer - Point to input buffer
+ * @param[in] BufferSize - Buffer size
+ * @param[in] HdtoutHeaderPtr - Point to Hdtout Header
+ *
+**/
+STATIC VOID
+AmdIdsHdtOutBreakPoint (
+ IN CHAR8 *Buffer,
+ IN UINTN BufferSize,
+ IN HDTOUT_HEADER *HdtoutHeaderPtr
+ )
+{
+ UINT32 numBp;
+ BREAKPOINT_UNIT *Pbpunit;
+ BOOLEAN isMatched;
+ UINT32 i;
+ Pbpunit = (BREAKPOINT_UNIT *) &HdtoutHeaderPtr->BreakpointList[0];
+ numBp = HdtoutHeaderPtr->NumBreakpointUnit;
+
+ for (;;) {
+ if (Pbpunit->AndFlag == IDS_HDTOUT_BP_AND_ON) {
+ isMatched = TRUE;
+ do {
+ isMatched &= AmdIdsHdtOutBreakPointUnit (&Pbpunit, &numBp, HdtoutHeaderPtr, Buffer);
+ } while ((Pbpunit->AndFlag == IDS_HDTOUT_BP_AND_ON) &&
+ (isMatched == TRUE) &&
+ (numBp > 0));
+ //Next one is IDS_HDTOUT_BP_AND_OFF
+ if (numBp > 0) {
+ if (isMatched == TRUE) {
+ isMatched &= AmdIdsHdtOutBreakPointUnit (&Pbpunit, &numBp, HdtoutHeaderPtr, Buffer);
+ } else {
+ Pbpunit++;
+ numBp--;
+ }
+ }
+ } else {
+ isMatched = AmdIdsHdtOutBreakPointUnit (&Pbpunit, &numBp, HdtoutHeaderPtr, Buffer);
+ }
+ if ((isMatched == TRUE) || (numBp == 0)) {
+ break;
+ }
+ }
+ //Do action
+ if (isMatched) {
+// AmdIdsSerialPrint (Buffer, BufferSize, NULL);
+ Pbpunit--;
+ switch (Pbpunit->Action) {
+ case HDTOUT_BP_ACTION_HALT:
+ i = (UINT32) (Pbpunit - ((BREAKPOINT_UNIT *) &HdtoutHeaderPtr->BreakpointList[0]));
+ IdsOutPort (HDTOUT_BREAKPOINT, (UINT32) (UINTN) Buffer, ( i << 16) | (UINT32) BufferSize);
+ break;
+ case HDTOUT_BP_ACTION_PRINTON:
+ if (HdtoutHeaderPtr->PrintCtrl != 1) {
+ HdtoutHeaderPtr->PrintCtrl = 1;
+ if (HdtoutHeaderPtr->OutBufferMode == HDTOUT_BUFFER_MODE_ON) {
+ AmdIdsHdtOutPrintWithBuffer (Buffer, BufferSize, HdtoutHeaderPtr);
+ } else {
+ IdsOutPort (HDTOUT_PRINT, (UINT32) (UINTN) Buffer, (UINT32) BufferSize);
+ }
+ }
+ break;
+ case HDTOUT_BP_ACTION_PRINTOFF:
+ if (HdtoutHeaderPtr->PrintCtrl != 0) {
+ HdtoutHeaderPtr->PrintCtrl = 0;
+ IdsOutPort (HDTOUT_PRINT, (UINT32) (UINTN) Buffer, (UINT32)BufferSize);
+ }
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ }
+}
+
+
+/**
+ * Print formated string to HDTOUT
+ *
+ * @param[in] Buffer - Point to input buffer
+ * @param[in] BufferSize - Buffer size
+ * @param[in] debugPrintPrivate - Option
+ *
+**/
+STATIC VOID
+AmdIdsHdtOutPrint (
+ IN CHAR8 *Buffer,
+ IN UINTN BufferSize,
+ IN IDS_DEBUG_PRINT_PRIVATE_DATA *debugPrintPrivate
+ )
+{
+ HDTOUT_HEADER *HdtoutHeaderPtr;
+ if (AmdIdsHdtoutGetHeader (&HdtoutHeaderPtr, NULL)) {
+ //Print Function
+ if (HdtoutHeaderPtr->PrintCtrl == HDTOUT_PRINTCTRL_ON) {
+ if (HdtoutHeaderPtr->OutBufferMode == HDTOUT_BUFFER_MODE_ON) {
+ AmdIdsHdtOutPrintWithBuffer (Buffer, BufferSize, HdtoutHeaderPtr);
+ } else {
+ IdsOutPort (HDTOUT_PRINT, (UINT32) (UINTN) Buffer, (UINT32) BufferSize);
+ }
+ }
+ //Check BreakPoint
+ if (HdtoutHeaderPtr->NumBreakpointUnit) {
+ AmdIdsHdtOutBreakPoint (Buffer, BufferSize, HdtoutHeaderPtr);
+ if (debugPrintPrivate->saveContext) {
+ AmdIdsHdtOutSaveContext (Buffer, BufferSize, HdtoutHeaderPtr);
+ debugPrintPrivate->saveContext = FALSE;
+ }
+ }
+ } else {
+ //No HDTOUT header found print directly without buffer
+ IdsOutPort (HDTOUT_PRINT, (UINT32) (UINTN) Buffer, (UINT32) BufferSize);
+ }
+}
+
+/**
+ * Init local private data for HDTOUT
+ *
+ * @param[in] Flag - filter flag
+ * @param[in] debugPrintPrivate - Point to debugPrintPrivate
+ *
+**/
+STATIC VOID
+AmdIdsHdtOutInitPrivateData (
+ IN UINT64 Flag,
+ IN IDS_DEBUG_PRINT_PRIVATE_DATA *debugPrintPrivate
+ )
+{
+ if (Flag == MEM_STATUS) {
+ debugPrintPrivate->saveContext = TRUE;
+ }
+}
+
+CONST IDS_DEBUG_PRINT ROMDATA IdsDebugPrintHdtoutInstance =
+{
+ AmdIdsHdtOutSupport,
+ AmdIdsHdtOutGetFilter,
+ AmdIdsHdtOutInitPrivateData,
+ AmdIdsHdtOutPrint
+};
+
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDpHdtout.h b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDpHdtout.h
new file mode 100644
index 0000000..ff41fb5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDpHdtout.h
@@ -0,0 +1,119 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Integrated Debug Debug_library Routines
+ *
+ * Contains all functions related to HDTOUT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _IDS_HDTOUT_H_
+#define _IDS_HDTOUT_H_
+
+#define HDTOUT_VERSION 0x0200
+
+/// HDTOUT command
+#define HDTOUT_COMMAND 0x99cc
+#define HDTOUT_INIT (0x10BF0000ul | HDTOUT_COMMAND)
+#define HDTOUT_ASSERT (0xA0BF0000ul | HDTOUT_COMMAND)
+#define HDTOUT_EXIT (0xE0BF0000ul | HDTOUT_COMMAND)
+#define HDTOUT_PRINT (0xC0BF0000ul | HDTOUT_COMMAND)
+#define HDTOUT_TIME_ANALYSE (0xD0BF0000ul | HDTOUT_COMMAND)
+#define HDTOUT_BREAKPOINT (0xB0BF0000ul | HDTOUT_COMMAND)
+#define HDTOUT_ERROR (0x1EBF0000ul | HDTOUT_COMMAND)
+
+
+#define HDTOUT_ERROR_HEAP_ALLOCATION 0x1
+#define HDTOUT_ERROR_HEAP_AllOCATE_FAIL 0x2
+
+#define HDTOUT_PRINTCTRL_OFF 0
+#define HDTOUT_PRINTCTRL_ON 1
+#define HDTOUT_ALL_CORES 0
+#define HDTOUT_BSP_ONLY 1
+#define HDTOUT_BUFFER_MODE_OFF 0
+#define HDTOUT_BUFFER_MODE_ON 1
+
+#define HDTOUT_HEADER_SIGNATURE 0xDB1099CCul
+#define HDTOUT_DEFAULT_BUFFER_SIZE 0x1000
+/// HDTOUT Header.
+typedef struct _HDTOUT_HEADER {
+ UINT32 Signature; ///< 0xDB1099CC
+ UINT16 Version; ///< HDTOUT version.
+ UINT16 BufferSize; ///< Size in bytes.
+ UINT16 DataIndex; ///< Data Index.
+ UINT8 PrintCtrl; ///< 0 off no print 1 on print
+ UINT8 NumBreakpointUnit; ///< default 0 no bp unit others number of bp unit
+ UINT32 FuncListAddr; ///< 32 bit address to the list of functions that script can execute
+ UINT8 ConsoleType; ///< Console type - deprecated
+ UINT8 Event; ///< Event type. - deprecated
+ UINT8 OutBufferMode; ///< Off:stack mode, On: heap mode - deprecated
+ UINT32 EnableMask; ///< Bitmap to select which part should be streamed out
+ UINT64 ConsoleFilter; ///< Filter use to select which part should be streamed out
+ UINT8 BspOnlyFlag; ///< 1 Only Enable Bsp output, 0 enable On All cores
+ UINT8 Reserved[56 - 32]; ///< Reserved for header expansion
+
+ CHAR8 BreakpointList[300]; ///< Breakpoint list
+ CHAR8 StatusStr[156]; ///< Shows current node, DCT, CS,...
+ CHAR8 Data[2]; ///< HDTOUT content. Its size will be determined by BufferSize.
+} HDTOUT_HEADER;
+
+#define IDS_HDTOUT_BP_AND_OFF 0
+#define IDS_HDTOUT_BP_AND_ON 1
+
+#define IDS_HDTOUT_BPFLAG_FORMAT_STR 0
+#define IDS_HDTOUT_BPFLAG_STATUS_STR 1
+
+#define HDTOUT_BP_ACTION_HALT 1
+#define HDTOUT_BP_ACTION_PRINTON 2
+#define HDTOUT_BP_ACTION_PRINTONE 3
+#define HDTOUT_BP_ACTION_PRINTOFF 4
+
+///breakpoint unit of HDTOUT
+typedef struct _BREAKPOINT_UNIT {
+ UINT8 AndFlag : 1; ///< Next string is ANDed to current string
+ UINT8 BpFlag : 1; ///< Format string or Status string
+ UINT8 Action : 4; ///< Halt, start HDTOUT, or stop HDT,...
+ UINT8 BpStrOffset; ///< Offset from BreakpointList to the breakpoint string
+} BREAKPOINT_UNIT;
+
+
+BOOLEAN
+AmdIdsHdtOutSupport (
+ VOID
+ );
+
+#endif //_IDS_HDTOUT_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDpSerial.c b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDpSerial.c
new file mode 100644
index 0000000..43d6bf6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Debug/IdsDpSerial.c
@@ -0,0 +1,185 @@
+/**
+ * @file
+ *
+ * AMD Integrated Debug Debug_library Routines
+ *
+ * Contains all functions related to HDTOUT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+
+ /*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "Ids.h"
+#include "IdsLib.h"
+#include "amdlib.h"
+#include "AMD.h"
+#include "IdsDebugPrint.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_IDS_DEBUG_IDSDPSERIAL_FILECODE
+
+
+/**
+ * Determine whether IDS console is enabled.
+ *
+ *
+ * @retval TRUE Alway return true
+ *
+ **/
+STATIC BOOLEAN
+AmdIdsSerialSupport (
+ VOID
+ )
+{
+
+ return TRUE;
+}
+
+/**
+ * Get Serial customize Filter
+ *
+ * @param[in,out] Filter Filter do be filled
+ *
+ * @retval FALSE Alway return FALSE
+ *
+ **/
+STATIC BOOLEAN
+AmdIdsSerialGetFilter (
+ IN OUT UINT64 *Filter
+ )
+{
+ return FALSE;
+}
+
+
+#define IDS_SERIAL_PORT_LSR (IDS_SERIAL_PORT + 5)
+#define IDS_LSR_TRANSMIT_HOLDING_REGISTER_EMPTY_MASK BIT5
+/**
+ * Send byte to Serial Port
+ *
+ * Before use this routine, please make sure Serial Communications Chip have been initialed
+ *
+ * @param[in] ByteSended Byte to be sended
+ *
+ * @retval TRUE Byte sended successfully
+ * @retval FALSE Byte sended failed
+ *
+ **/
+STATIC BOOLEAN
+AmdIdsSerialSendByte (
+ IN CHAR8 ByteSended
+ )
+{
+ UINT32 RetryCount;
+ UINT8 Value;
+
+ //Wait until LSR.Bit5 (Transmitter holding register Empty)
+ RetryCount = 200;
+ do {
+ LibAmdIoRead (AccessWidth8, IDS_SERIAL_PORT_LSR, &Value, NULL);
+ RetryCount--;
+ } while (((Value & IDS_LSR_TRANSMIT_HOLDING_REGISTER_EMPTY_MASK) == 0) &&
+ (RetryCount > 0));
+
+ if (RetryCount == 0) {
+ //Time expired
+ return FALSE;
+ } else {
+ LibAmdIoWrite (AccessWidth8, IDS_SERIAL_PORT, &ByteSended, NULL);
+ return TRUE;
+ }
+}
+
+
+/**
+ * Print formated string
+ *
+ * @param[in] Buffer - Point to input buffer
+ * @param[in] BufferSize - Buffer size
+ * @param[in] debugPrintPrivate - Option
+ *
+**/
+STATIC VOID
+AmdIdsSerialPrint (
+ IN CHAR8 *Buffer,
+ IN UINTN BufferSize,
+ IN IDS_DEBUG_PRINT_PRIVATE_DATA *debugPrintPrivate
+ )
+{
+ BOOLEAN SendStatus;
+ UINT32 RetryCount;
+ RetryCount = 200;
+ while (BufferSize--) {
+ do {
+ if (*Buffer == '\n') {
+ SendStatus = AmdIdsSerialSendByte ('\r');
+ }
+ SendStatus = AmdIdsSerialSendByte (*Buffer);
+ RetryCount--;
+ } while ((SendStatus == FALSE) && (RetryCount > 0));
+ Buffer ++;
+ }
+}
+
+/**
+ * Init local private data
+ *
+ * @param[in] Flag - filter flag
+ * @param[in] debugPrintPrivate - Point to debugPrintPrivate
+ *
+**/
+STATIC VOID
+AmdIdsSerialInitPrivateData (
+ IN UINT64 Flag,
+ IN IDS_DEBUG_PRINT_PRIVATE_DATA *debugPrintPrivate
+ )
+{
+
+}
+
+CONST IDS_DEBUG_PRINT ROMDATA IdsDebugPrintSerialInstance =
+{
+ AmdIdsSerialSupport,
+ AmdIdsSerialGetFilter,
+ AmdIdsSerialInitPrivateData,
+ AmdIdsSerialPrint
+};
+
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Family/0x16/KB/IdsF16KbAllService.c b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Family/0x16/KB/IdsF16KbAllService.c
new file mode 100644
index 0000000..fddf8eb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Family/0x16/KB/IdsF16KbAllService.c
@@ -0,0 +1,308 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Integrated Debug Option Specific Routines for common F16
+ *
+ * Contains AMD AGESA debug macros and library functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "IdsLib.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF16PowerMgmt.h"
+#include "F16KbPowerMgmt.h"
+#include "IdsF16KbAllService.h"
+#include "IdsF16KbNvDef.h"
+#include "Gnb.h"
+#include "GnbGfx.h"
+#include "GnbRegistersKB.h"
+#include "GnbPcie.h"
+#include "GnbHandleLib.h"
+#include "GnbRegisterAccKB.h"
+#include "IdsRegAcc.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_IDS_FAMILY_0X16_KB_IDSF16KBALLSERVICE_FILECODE
+
+/**
+ * IDS F16 Backend Function for HTC Controls
+ *
+ * This function is used to override HTC control Parameter.
+ *
+ * @param[in,out] DataPtr The Pointer of HTC register.
+ * @param[in,out] StdHeader The Pointer of AMD_CONFIG_PARAMS.
+ * @param[in] IdsNvPtr The Pointer of NV Table.
+ *
+ * @retval IDS_SUCCESS Backend function is called successfully.
+ * @retval IDS_UNSUPPORTED No Backend function is found.
+ *
+ **/
+STATIC IDS_STATUS
+IdsSubHTCControlF16Kb (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ )
+{
+ HTC_REGISTER *PHtcReg;
+ IDS_STATUS NvValue;
+
+ PHtcReg = (HTC_REGISTER *) DataPtr;
+ IDS_NV_READ_SKIP (NvValue, AGESA_IDS_NV_HTC_EN, IdsNvPtr, StdHeader) {
+ switch (NvValue) {
+ case IdsNvThermalHTCEnDisabled:
+ PHtcReg->HtcEn = 0;
+ break;
+ case IdsNvThermalHTCEnEnabled:
+ PHtcReg->HtcEn = 1;
+ break;
+ case IdsNvThermalHTCEnAuto:
+ break;
+ default:
+ ASSERT (FALSE);
+ break;
+ }
+ }
+
+ IDS_NV_READ_SKIP (NvValue, AGESA_IDS_NV_HTC_OVERRIDE, IdsNvPtr, StdHeader) {
+ switch (NvValue) {
+ case IdsNvThermalHTCOverrideDisabled:
+ break;
+ case IdsNvThermalHTCOverrideEnabled:
+ IDS_NV_READ_SKIP (NvValue, AGESA_IDS_NV_HTC_PSTATE_LIMIT, IdsNvPtr, StdHeader) {
+ ASSERT ((NvValue >= IdsNvThermalHtcPstateLimitMin) && (NvValue <= IdsNvThermalHtcPstateLimitMax));
+ PHtcReg->HtcPstateLimit = NvValue;
+ }
+
+ IDS_NV_READ_SKIP (NvValue, AGESA_IDS_NV_HTC_TEMP_HYS, IdsNvPtr, StdHeader) {
+ ASSERT ((NvValue >= IdsNvThermalHTCTempHysMin) && (NvValue <= IdsNvThermalHTCTempHysMax));
+ PHtcReg->HtcHystLmt = NvValue;
+ }
+
+ IDS_NV_READ_SKIP (NvValue, AGESA_IDS_NV_HTC_ACT_TEMP, IdsNvPtr, StdHeader) {
+ ASSERT ((NvValue >= IdsNvThermalHTCActTempMin) && (NvValue <= IdsNvThermalHTCActTempMax));
+ PHtcReg->HtcTmpLmt = NvValue;
+ }
+ break;
+ default:
+ ASSERT (FALSE);
+ break;
+ }
+ }
+ return IDS_SUCCESS;
+}
+
+/**
+ * IDS Backend Function for Memory Mapping
+ *
+ * This function is used to override the following setting.
+ * EnableBankIntlv, ChannelIntlvMode, EnableNodeIntlv, MemHole,
+ * EnablePowerDown, PowerDownMode, EnableBurstLen32, BankSwizzle,
+ * UserTimingMode, MemClockValue, EnableParity, DqsTrainCtl, AllMemClks,
+ * and EnableClkHZAltVidC3.
+ *
+ * @param[in,out] DataPtr The Pointer of AMD_POST_PARAMS.
+ * @param[in,out] StdHeader The Pointer of AMD_CONFIG_PARAMS.
+ * @param[in] IdsNvPtr The Pointer of NV Table.
+ *
+ * @retval IDS_SUCCESS Backend function is called successfully.
+ * @retval IDS_UNSUPPORTED No Backend function is found.
+ *
+ **/
+STATIC IDS_STATUS
+IdsSubMemoryMappingF16Kb (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ )
+{
+ AMD_POST_PARAMS *PostParamsPtr;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ IDS_STATUS NvValue;
+ MEM_DATA_STRUCT * memdataptr;
+
+ PostParamsPtr = (AMD_POST_PARAMS *)DataPtr;
+ memdataptr = PostParamsPtr->MemConfig.MemData;
+ RefPtr = memdataptr->ParameterListPtr;
+ IDS_NV_READ_SKIP (NvValue, AGESA_IDS_NV_BANK_INTERLEAVE, IdsNvPtr, StdHeader) {
+ switch (NvValue) {
+ case IdsNvMemMappingBankInterleaveDisabled:
+ RefPtr->EnableBankIntlv = FALSE;
+ break;
+ case IdsNvMemMappingBankInterleaveAuto:
+ RefPtr->EnableBankIntlv = TRUE;
+ break;
+ default:
+ ASSERT (FALSE);
+ break;
+ }
+ }
+ return IDS_SUCCESS;
+}
+
+/**
+ * IDS Backend Function for override GNB platform config
+ *
+ * @param[in,out] DataPtr The Pointer of BOOLEAN.
+ * @param[in,out] StdHeader The Pointer of AMD_CONFIG_PARAMS.
+ * @param[in] IdsNvPtr The Pointer of NV Table.
+ *
+ * @retval IDS_SUCCESS Backend function is called successfully.
+ * @retval IDS_UNSUPPORTED No Backend function is found.
+ *
+ **/
+STATIC IDS_STATUS
+IdsSubGnbPlatformCfgF16Kb (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ )
+{
+ GFX_PLATFORM_CONFIG *PGfx;
+ IDS_STATUS NvValue;
+
+ PGfx = (GFX_PLATFORM_CONFIG*) DataPtr;
+ //NB Azalia
+ IDS_NV_READ_SKIP (NvValue, AGESA_IDS_NV_GNBHDAUDIOEN, IdsNvPtr, StdHeader) {
+ switch (NvValue) {
+ //Auto
+ case IdsNvGnbGfxNbAzaliaAuto:
+ break;
+ //Disabled
+ case IdsNvGnbGfxNbAzaliaDisabled:
+ PGfx->GnbHdAudio = 0;
+ break;
+ //Enabled
+ case IdsNvGnbGfxNbAzaliaEnabled:
+ PGfx->GnbHdAudio = 1;
+ break;
+ default:
+ ASSERT (FALSE);
+ break;
+ }
+ }
+ return IDS_SUCCESS;
+}
+/**
+ * IDS Family specific Function for programming GMMX register
+ *
+ * @param[in,out] DataPtr The Pointer of BOOLEAN.
+ * @param[in,out] StdHeader The Pointer of AMD_CONFIG_PARAMS.
+ * @param[in] IdsNvPtr The Pointer of NV Table.
+ *
+ * @retval IDS_SUCCESS Backend function is called successfully.
+ *
+ **/
+STATIC IDS_STATUS
+IdsRegSetGmmxF16Kb (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ )
+{
+ IdsRegAcc132_STRUCT *PIdsRegGmmx;
+ UINT32 Value;
+ GNB_HANDLE *GnbHandle;
+
+ PIdsRegGmmx = (IdsRegAcc132_STRUCT *) DataPtr;
+ GnbHandle = GnbGetHandle (StdHeader);
+
+ GnbRegisterReadKB (
+ GnbHandle,
+ 0x12,
+ PIdsRegGmmx->Offset,
+ &Value,
+ 0,
+ StdHeader);
+
+ IdsLibDataMaskSet32 (&Value, PIdsRegGmmx->AndMask, PIdsRegGmmx->OrMask);
+
+ GnbRegisterWriteKB (
+ GnbHandle,
+ 0x12,
+ PIdsRegGmmx->Offset,
+ &Value,
+ 0,
+ StdHeader);
+
+ return IDS_SUCCESS;
+}
+
+CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatHtcControlBlockF16Kb =
+{
+ IDS_FEAT_HTC_CTRL,
+ IDS_ALL_CORES,
+ IDS_HTC_CTRL,
+ AMD_FAMILY_16_KB,
+ IdsSubHTCControlF16Kb
+};
+
+
+CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatMemoryMappingPostBeforeBlockF16Kb =
+{
+ IDS_FEAT_MEMORY_MAPPING,
+ IDS_ALL_CORES,
+ IDS_INIT_POST_BEFORE,
+ AMD_FAMILY_16_KB,
+ IdsSubMemoryMappingF16Kb
+};
+
+CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatGnbPlatformCfgBlockF16Kb =
+{
+ IDS_FEAT_GNB_PLATFORMCFG,
+ IDS_ALL_CORES,
+ IDS_GNB_PLATFORMCFG_OVERRIDE,
+ AMD_FAMILY_16_KB,
+ IdsSubGnbPlatformCfgF16Kb
+};
+
+// For register access
+CONST IDS_FAMILY_FEAT_STRUCT ROMDATA IdsFeatRegGmmxF16Kb =
+ MAKE_IDS_FAMILY_FEAT_ALL_CORES (
+ dummy210,
+ AMD_FAMILY_16_KB,
+ IdsRegSetGmmxF16Kb
+ );
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Family/0x16/KB/IdsF16KbAllService.h b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Family/0x16/KB/IdsF16KbAllService.h
new file mode 100644
index 0000000..3288143
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Family/0x16/KB/IdsF16KbAllService.h
@@ -0,0 +1,49 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD IDS Routines
+ *
+ * Contains AMD AGESA IDS Translation
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+#ifndef _IDS_F16_KB_ALLSERVICE_H_
+#define _IDS_F16_KB_ALLSERVICE_H_
+#ifdef __IDS_EXTENDED__
+ #include IDS_EXT_INCLUDE_F16_KB (IdsIntF16KbAllService)
+#endif
+
+#endif //_IDS_F16_KB_ALLSERVICE_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Family/0x16/KB/IdsF16KbNvDef.h b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Family/0x16/KB/IdsF16KbNvDef.h
new file mode 100644
index 0000000..c08bdb3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Family/0x16/KB/IdsF16KbNvDef.h
@@ -0,0 +1,287 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * IDS NV definition for F16Kb
+ *
+ * Auto generated from CBS XML file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS F16Kb
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+
+#ifndef _IDSF16KBNVDEF_H_
+#define _IDSF16KBNVDEF_H_
+///HTC Enable
+///Enable or disable Hardware Thermal Control. D18F3x64[0]
+typedef enum {
+ IdsNvThermalHTCEnDisabled = 0,///<Disabled
+ IdsNvThermalHTCEnEnabled = 1,///<Enabled
+ IdsNvThermalHTCEnAuto = 3,///<Auto
+} IdsNvThermalHTCEn;
+
+///HTC Override
+///Enable or disable Thermal Control Override
+typedef enum {
+ IdsNvThermalHTCOverrideDisabled = 0,///<Disabled
+ IdsNvThermalHTCOverrideEnabled = 1,///<Enabled
+} IdsNvThermalHTCOverride;
+
+///HTC P-state limit select
+///Specifies the P-state limit of all cores when in the P-state based HTC-active state
+#define IdsNvThermalHtcPstateLimitMin 0
+#define IdsNvThermalHtcPstateLimitMax 7
+
+///HTC Temperature Hysteresis
+///Sets the temperature hysteresis for HTC. D18F3x64[27:24]
+#define IdsNvThermalHTCTempHysMin 0
+#define IdsNvThermalHTCTempHysMax 0xF
+
+///HTC Activation Temp
+///Sets the HTC temperature limit. D18F3x64[22:16]
+#define IdsNvThermalHTCActTempMin 0
+#define IdsNvThermalHTCActTempMax 0x7F
+
+///Bank Interleave
+///Interleave memory blocks across the DRAM chip selects for node 0.
+typedef enum {
+ IdsNvMemMappingBankInterleaveDisabled = 0,///<Disabled
+ IdsNvMemMappingBankInterleaveAuto = 1,///<Auto
+} IdsNvMemMappingBankInterleave;
+
+///DRAM Channel Interleave
+///Interleave between two DCTs when they are in unganged mode.
+typedef enum {
+ IdsNvMemMappingChlInterleaveAddress_bit_6 = 0,///<Address bit 6
+ IdsNvMemMappingChlInterleaveAddress_bit_12 = 1,///<Address bit 12
+ IdsNvMemMappingChlInterleaveHash__exclusive_OR_of_address_bits_20_16__6_ = 2,///<Hash: exclusive OR of address bits[20:16, 6]
+ IdsNvMemMappingChlInterleaveHash__excluseive_OR_of_address_bits_20_16__9_ = 3,///<Hash: excluseive OR of address bits[20:16, 9]
+ IdsNvMemMappingChlInterleaveAddress_bit_8 = 4,///<Address bit 8
+ IdsNvMemMappingChlInterleaveAddress_bit_9 = 5,///<Address bit 9
+ IdsNvMemMappingChlInterleaveDisabled = 0xF,///<Disabled
+ IdsNvMemMappingChlInterleaveAuto = 0xFF,///<Auto
+} IdsNvMemMappingChlInterleave;
+
+///ECC Symbol Size
+///ECC symbol size and code selection. D18F3x180[25]
+typedef enum {
+ IdsNvEccSymbolSizex4 = 0,///<x4
+ IdsNvEccSymbolSizex8 = 1,///<x8
+ IdsNvEccSymbolSizeAuto = 3,///<Auto
+} IdsNvEccSymbolSize;
+
+///DRAM prefetches triggered from CPU requests
+///Enable or disable DRAM prefetches Prefetch triggered by CPU requests.
+typedef enum {
+ IdsNvPrefetchPrefCpuDis0 = 0,///<0
+ IdsNvPrefetchPrefCpuDis1 = 1,///<1
+ IdsNvPrefetchPrefCpuDisAuto = 3,///<Auto
+} IdsNvPrefetchPrefCpuDis;
+
+///HW prefetch training on SW Prefetches
+///Enable or disable Hardware Prefetch training on Software Prefetches
+typedef enum {
+ IdsNvPrefetchDisHWPFforSWPF0 = 0,///<0
+ IdsNvPrefetchDisHWPFforSWPF1 = 1,///<1
+ IdsNvPrefetchDisHWPFforSWPFAuto = 3,///<Auto
+} IdsNvPrefetchDisHWPFforSWPF;
+
+///Hardware Prefetches
+///Enable or disable Hardware Prefetches.
+typedef enum {
+ IdsNvPrefetchDisHWPF0 = 0,///<0
+ IdsNvPrefetchDisHWPF1 = 1,///<1
+ IdsNvPrefetchDisHWPFAuto = 3,///<Auto
+} IdsNvPrefetchDisHWPF;
+
+///UMI Gen2
+///Enable or disable UMI link Gen2
+typedef enum {
+ IdsNvFchGppUmiGen2Disabled = 0,///<Disabled
+ IdsNvFchGppUmiGen2Enabled = 1,///<Enabled
+} IdsNvFchGppUmiGen2;
+
+///SATA Controller
+///Disable or enable OnChip SATA controller
+typedef enum {
+ IdsNvFchSataEnableDisabled = 0,///<Disabled
+ IdsNvFchSataEnableEnabled = 1,///<Enabled
+} IdsNvFchSataEnable;
+
+///SATA Mode
+///Select OnChip SATA Type
+typedef enum {
+ IdsNvFchSataClassNative_IDE = 0,///<Native IDE
+ IdsNvFchSataClassRAID = 1,///<RAID
+ IdsNvFchSataClassAHCI = 3,///<AHCI
+ IdsNvFchSataClassLegacy_IDE = 3,///<Legacy IDE
+ IdsNvFchSataClassIDE__AHCI = 4,///<IDE->AHCI
+ IdsNvFchSataClassAHCI_as_ID_0x7804 = 5,///<AHCI as ID 0x7804
+ IdsNvFchSataClassIDE__AHCI_as_ID_0x7804 = 6,///<IDE->AHCI as ID 0x7804
+} IdsNvFchSataClass;
+
+///OnChip IDE
+///Select OnChip IDE controller mode
+typedef enum {
+ IdsNvFchSataIdeModeLegacy_IDE = 0,///<Legacy IDE
+ IdsNvFchSataIdeModeNative_IDE = 1,///<Native IDE
+} IdsNvFchSataIdeMode;
+
+///IDE Controller
+///Disable or enable OnChip IDE controller
+typedef enum {
+ IdsNvFchSataIdeEnableDisabled = 0,///<Disabled
+ IdsNvFchSataIdeEnableEnabled = 1,///<Enabled
+} IdsNvFchSataIdeEnable;
+
+///XHC Switch (Bus 0 Dev 16 Fn 0/1)
+///Select disable or enable XHCI HCs (Bus 0 Dev 16 Fn 0/1)
+typedef enum {
+ IdsNvFchUsbXhciSwitchDisabled = 0,///<Disabled
+ IdsNvFchUsbXhciSwitchEnabled = 1,///<Enabled
+} IdsNvFchUsbXhciSwitch;
+
+///USB1(Bus 0 Dev 18 Fn 0/2)
+///Select disable or enable USB1 HCs (Bus 0 Dev 18 Fn 0/2)
+typedef enum {
+ IdsNvFchUsbOhci1EnableDisabled = 0,///<Disabled
+ IdsNvFchUsbOhci1EnableEnabled = 1,///<Enabled
+} IdsNvFchUsbOhci1Enable;
+
+///USB2 (Bus 0 Dev 19 Fn 0/2)
+///Select disable or enable USB2 HCs (Bus 0 Dev 19 Fn 0/2)
+typedef enum {
+ IdsNvFchUsbOhci2EnableDisabled = 0,///<Disabled
+ IdsNvFchUsbOhci2EnableEnabled = 1,///<Enabled
+} IdsNvFchUsbOhci2Enable;
+
+///USB3 (Bus 0 Dev 22 Fn 0/2)
+///Select disable or enable USB3 HCs (Bus 0 Dev 22 Fn 0/2)
+typedef enum {
+ IdsNvFchUsbOhci3EnableDisabled = 0,///<Disabled
+ IdsNvFchUsbOhci3EnableEnabled = 1,///<Enabled
+} IdsNvFchUsbOhci3Enable;
+
+///USB4 (Bus 0 Dev 20 Fn 5)
+///Select disable or enable USB4 HC (Bus 0 Dev 20 Fn 5)
+typedef enum {
+ IdsNvFchUsbOhci4EnableDisabled = 0,///<Disabled
+ IdsNvFchUsbOhci4EnableEnabled = 1,///<Enabled
+} IdsNvFchUsbOhci4Enable;
+
+///Hardware Monitor Enable
+///Master switch to enable or disable hardware monitor function
+typedef enum {
+ IdsNvFchHwmEnableDisabled = 0,///<Disabled
+ IdsNvFchHwmEnableEnabled = 1,///<Enabled
+} IdsNvFchHwmEnable;
+
+///In-Chip IR
+///Enable or disable the In-Chip IR
+typedef enum {
+ IdsNvFchIrConfigDisabled = 0,///<Disabled
+ IdsNvFchIrConfigRX_TX0_Only = 1,///<RX_TX0 Only
+ IdsNvFchIrConfigRX_TX1_Only = 2,///<RX_TX1 Only
+ IdsNvFchIrConfigRX__TX0__and_TX1 = 3,///<RX, TX0, and TX1
+} IdsNvFchIrConfig;
+
+///SD Configuration Mode
+///Select SD Mode
+typedef enum {
+ IdsNvFchSdConfigDisabled = 0,///<Disabled
+ IdsNvFchSdConfigADMA = 1,///<ADMA
+ IdsNvFchSdConfigDMA = 2,///<DMA
+ IdsNvFchSdConfigPIO = 3,///<PIO
+} IdsNvFchSdConfig;
+
+///Azalia Device
+///Select disable or enable Azalia Device
+typedef enum {
+ IdsNvFchAzaliaControlAuto = 0,///<Auto
+ IdsNvFchAzaliaControlDisabled = 1,///<Disabled
+ IdsNvFchAzaliaControlEnabled = 2,///<Enabled
+ IdsNvFchAzaliaControlReserved = 3,///<Reserved
+} IdsNvFchAzaliaControl;
+
+///Integrated Graphics Controller
+///Enable Integrate Graphics controller
+typedef enum {
+ IdsNvGnbGfxiGPU_CONTROLAuto = 0,///<Auto
+ IdsNvGnbGfxiGPU_CONTROLDisabled = 1,///<Disabled
+ IdsNvGnbGfxiGPU_CONTROLForces = 2,///<Forces
+} IdsNvGnbGfxiGPU_CONTROL;
+
+///UMA Frame buffer Size
+///Set UMA FB size
+typedef enum {
+ IdsNvGnbGfxUmaFrameBufferSizeAuto = 0,///<Auto
+ IdsNvGnbGfxUmaFrameBufferSize32M = 1,///<32M
+ IdsNvGnbGfxUmaFrameBufferSize64M = 2,///<64M
+ IdsNvGnbGfxUmaFrameBufferSize128M = 3,///<128M
+ IdsNvGnbGfxUmaFrameBufferSize256M = 4,///<256M
+ IdsNvGnbGfxUmaFrameBufferSize384M = 5,///<384M
+ IdsNvGnbGfxUmaFrameBufferSize512M = 6,///<512M
+ IdsNvGnbGfxUmaFrameBufferSize1G = 7,///<1G
+ IdsNvGnbGfxUmaFrameBufferSize2G = 8,///<2G
+ IdsNvGnbGfxUmaFrameBufferSize4G = 9,///<4G
+} IdsNvGnbGfxUmaFrameBufferSize;
+
+///NB Azalia
+///Enable Integrate HD Audio controller
+typedef enum {
+ IdsNvGnbGfxNbAzaliaDisabled = 0,///<Disabled
+ IdsNvGnbGfxNbAzaliaEnabled = 1,///<Enabled
+ IdsNvGnbGfxNbAzaliaAuto = 0xf,///<Auto
+} IdsNvGnbGfxNbAzalia;
+
+///PSPP Policy
+///PCIe speed power policy
+typedef enum {
+ IdsNvGnbPciePsppPolicyDisabled = 0,///<Disabled
+ IdsNvGnbPciePsppPolicyPerformance = 1,///<Performance
+ IdsNvGnbPciePsppPolicyBalanced_High = 2,///<Balanced-High
+ IdsNvGnbPciePsppPolicyBalanced_Low = 3,///<Balanced-Low
+ IdsNvGnbPciePsppPolicyPower_Saving = 4,///<Power Saving
+ IdsNvGnbPciePsppPolicyAuto = 5,///<Auto
+} IdsNvGnbPciePsppPolicy;
+
+///IOMMU
+///
+typedef enum {
+ IdsNvGnbNbIOMMUDisabled = 0,///<Disabled
+ IdsNvGnbNbIOMMUEnabled = 1,///<Enabled
+} IdsNvGnbNbIOMMU;
+
+#endif // _IDSF16KBNVDEF_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/IdsLib.h b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/IdsLib.h
new file mode 100644
index 0000000..355cd1f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/IdsLib.h
@@ -0,0 +1,433 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD IDS Routines
+ *
+ * Contains AMD AGESA Integrated Debug Macros
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+#ifndef _IDS_LIB_H_
+#define _IDS_LIB_H_
+#include "OptionsIds.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "Table.h"
+///Specific time stamp performance analysis which need ids control support
+#if IDSOPT_CONTROL_ENABLED == TRUE
+ #define PERF_SPEC_TS_ANALYSE(StdHeader) IdsPerfSpecTsAnalyse(StdHeader)
+#else
+ #define PERF_SPEC_TS_ANALYSE(StdHeader)
+#endif
+
+#define IDS_NV_READ(NvValue, Nvid, IdsNvPtr, StdHeader)\
+ NvValue = AmdIdsNvReader ((Nvid), (IdsNvPtr), (StdHeader));
+
+#define IDS_NV_READ_SKIP(NvValue, Nvid, IdsNvPtr, StdHeader)\
+ if (((NvValue) = AmdIdsNvReader ((Nvid), (IdsNvPtr), (StdHeader))) != IDS_UNSUPPORTED)
+#define IDS_GET_MASK32(HighBit, LowBit) ((((UINT32) 1 << (HighBit - LowBit + 1)) - 1) << LowBit)
+
+#define IDS_MAX_MEM_ITEMS 80 ///< Maximum IDS Mem Table Size in Heap.
+///Macro for Ids family feat
+#define MAKE_IDS_FAMILY_FEAT_ALL_CORES(FEAT_ID, FAMILY, FUNCTION) \
+ {IDS_FEAT_COMMON, IDS_ALL_CORES, FEAT_ID, FAMILY, FUNCTION}
+
+///Macro for signature
+#define MAKE_SIGNATURE(a, b, c, d) ((UINT32) ((d << 24) | (c << 16) | (b << 8) | a))
+typedef UINT32 SIGNATURE;
+
+// TYPEDEFS, STRUCTURES, ENUMS
+//
+
+typedef AGESA_STATUS (*PF_IDS_AP_TASK) (VOID *AptaskPara, AMD_CONFIG_PARAMS *StdHeader);
+
+///Structure define for IdsAgesaRunFcnOnApLate
+typedef struct _IDSAPLATETASK {
+ PF_IDS_AP_TASK ApTask; ///< Point function which AP need to do
+ VOID *ApTaskPara; ///< Point to Ap function parameter1
+} IDSAPLATETASK;
+
+/// Data Structure defining IDS Data in HEAP
+/// This data structure contains information that is stored in HEAP and will be
+/// used in IDS backend function. It includes the size of memory to be allocated
+/// for IDS, the relative offsets of the mapping table IDS setup options, the GRA
+/// table and the register table to override mem setting. It also includes a base
+/// address of IDS override image which will be used to control the behavior of
+/// AGESA testpoint if this feature is enabled.
+typedef struct {
+ BOOLEAN IgnoreIdsDefault; ///< Control ignore Default value of IDS NV list specified by IdsNvTableOffset
+ UINT64 IdsImageBase; ///< IDS Override Image Base Address
+ UINT32 IdsHeapMemSize; ///< IDS Total Memory Size in Heap
+ UINT32 IdsNvTableOffset; ///< Offset of IDS NV Table
+ UINT32 IdsMemTableOffset; ///< Offset of IDS Mem Table
+ UINT32 IdsExtendOffset; ///< Offset of Ids extend heap
+} IDS_CONTROL_STRUCT;
+
+/// Data Structure of Parameters for TestPoint_TSC.
+typedef struct {
+ UINT32 LineInFile; ///< Line of current time counter
+ UINT64 Description; ///<Description ID
+ UINT64 StartTsc; ///< The StartTimer of TestPoint_TSC
+} TestPoint_TSC;
+
+#define MAX_PERFORMANCE_UNIT_NUM (IDS_TP_END - TP_BEGINPROCAMDINITEARLY)
+/// Data Structure of Parameters for TP_Perf_STRUCT.
+typedef struct {
+ UINT32 Signature; ///< "PERF"
+ UINT32 Version; ///< version
+ UINT32 Index; ///< The Index of TP_Perf_STRUCT
+ UINT32 TscInMhz; ///< Tsc counter in 1 mhz
+ TestPoint_TSC TP[MAX_PERFORMANCE_UNIT_NUM]; ///< The TP of TP_Perf_STRUCT
+} TP_Perf_STRUCT;
+
+///Bus speed Optimization
+typedef enum {
+ IDS_POWER_POLICY_PERFORMANCE = 0, ///< Performance
+ IDS_POWER_POLICY_POWER = 1, ///< Power
+ IDS_POWER_POLICY_AUTO = 3, ///< Auto
+} IDS_NV_AMDBUSSPEEDOPTIMIZATION;
+
+///IDS early AP task
+typedef struct _IDS_EARLY_AP_TASK0 {
+ UINT8 Core; ///< Core to run Aptask
+ AP_TASK ApTask; ///< Speicify task property
+} IDS_EARLY_AP_TASK0;
+
+#define IDS_EARLY_AP_TASK_PARA_NUM 100
+///IDS early AP task
+typedef struct _IDS_EARLY_AP_TASK {
+ IDS_EARLY_AP_TASK0 Ap_Task0; ///< Ap Task exclude parameter buffer
+ UINT8 Parameters[IDS_EARLY_AP_TASK_PARA_NUM]; ///< Parameter buffer
+} IDS_EARLY_AP_TASK;
+
+///AP service Time Point
+typedef enum {
+ IDS_AP_RUN_CODE_EARLY, ///< Amdinitearly
+ IDS_AP_RUN_CODE_POST, ///< Amdinitpost
+ IDS_AP_RUN_CODE_LATE, ///< After AmdInitPost
+ IDS_AP_RUN_CODE_END ///< Last element
+} IDS_AP_RUN_CODE_TIMEPOINT;
+
+/// Parameters for IdsRunCodeOnCores
+typedef struct _IDS_RUNCODE_PARAMS {
+ IDS_AP_RUN_CODE_TIMEPOINT TimePoint; ///< TimePoint
+ UINT8 Socket; ///< IDS_ALL_SOCKET: all sockets
+ UINT8 Core; ///< IDS_ALL_CORE: all cores
+ PF_AP_TASK_IO ApTask; ///< Only support this type function
+ UINT16 ParamsDataSizeInDwords; ///< Size of the data to be transferred rounded up to the nearest dword
+ VOID *ParamsDataPtr; ///< Pointer to the parameter
+} IDS_RUNCODE_PARAMS;
+
+
+#define IDS_ALL_SOCKET 0xFF
+#define IDS_ALL_MODULE 0xFF
+#define IDS_ALL_CORE 0xFF
+#define IDS_ALL_DCT 0xFF
+
+/*----------------------------------------------------------------------------------------
+ * F U N C T I O N P R O T O T Y P E
+ *----------------------------------------------------------------------------------------
+ */
+
+IDS_STATUS
+IdsSubUCode (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ );
+
+IDS_STATUS
+IdsSubGangingMode (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ );
+
+IDS_STATUS
+IdsSubPowerDownMode (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ );
+
+IDS_STATUS
+IdsSubAllMemClkEn (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ );
+
+IDS_STATUS
+IdsSubHtLinkControl (
+ OUT VOID *Data,
+ IN AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ );
+
+IDS_STATUS
+IdsSubPostPState (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ );
+
+IDS_STATUS
+IdsSubPowerPolicyOverride (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ );
+
+AGESA_STATUS
+AmdIdsCtrlInitialize (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+IDS_STATUS
+AmdIdsNvReader (
+ IN UINT16 IdsNvId,
+ IN IDS_NV_ITEM *NvTablePtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+AmdGetIdsNvTable (
+ IN OUT VOID **IdsNvTable,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+IdsOutPort (
+ IN UINT32 Addr,
+ IN UINT32 Value,
+ IN UINT32 Flag
+ );
+
+IDS_STATUS
+IdsCommonReturn (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ );
+
+AGESA_STATUS
+IdsAgesaRunFcnOnApLate (
+ IN UINTN ApicIdOfCore,
+ IN IDSAPLATETASK *ApLateTaskPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+IdsRunCodeOnCores (
+ IN IDS_RUNCODE_PARAMS *PIdsRuncodeParams,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+IdsAgesaRunFcnOnAllCoresLate (
+ IN IDSAPLATETASK *ApLateTaskPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+IDS_STATUS
+IdsParseFeatTbl (
+ IN AGESA_IDS_OPTION IdsOption,
+ IN CONST IDS_FAMILY_FEAT_STRUCT * PIdsFeatTbl[],
+ IN OUT VOID *DataPtr,
+ IN IDS_NV_ITEM *IdsNvPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+IDS_STATUS
+IdsSubPowerDownCtrl (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ );
+
+IDS_STATUS
+IdsSubHdtOut (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ );
+
+UINT8
+IdsGetNumPstatesFamCommon (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+IdsApRunCodeOnAllLocalCores (
+ IN AP_TASK *TaskPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+IDS_STATUS
+IdsSubTargetPstate (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ );
+
+VOID
+IdsMakePciRegEntry (
+ IN OUT TABLE_ENTRY_FIELDS **TableEntry,
+ IN UINT64 Family,
+ IN UINT64 Revision,
+ IN UINT32 PciAddr,
+ IN UINT32 Data,
+ IN UINT32 Mask
+ );
+
+VOID
+IdsMakeHtLinkPciRegEntry (
+ IN OUT TABLE_ENTRY_FIELDS **TableEntry,
+ IN UINT64 Family,
+ IN UINT64 Revision,
+ IN UINT32 HtHostFeat,
+ IN UINT32 PciAddr,
+ IN UINT32 Data,
+ IN UINT32 Mask
+ );
+
+VOID
+IdsMakeHtFeatPciRegEntry (
+ IN OUT TABLE_ENTRY_FIELDS **TableEntry,
+ IN UINT64 Family,
+ IN UINT64 Revision,
+ IN UINT32 HtHostFeat,
+ IN UINT32 PackageType,
+ IN UINT32 PciAddr,
+ IN UINT32 Data,
+ IN UINT32 Mask
+ );
+
+VOID
+IdsMakeHtHostPciRegEntry (
+ IN OUT TABLE_ENTRY_FIELDS **TableEntry,
+ IN UINT64 Family,
+ IN UINT64 Revision,
+ IN UINT32 HtHostFeat,
+ IN UINT32 PciAddr,
+ IN UINT32 Data,
+ IN UINT32 Mask
+ );
+
+VOID
+IdsMakeHtPhyRegEntry (
+ IN OUT TABLE_ENTRY_FIELDS **TableEntry,
+ IN UINT64 Family,
+ IN UINT64 Revision,
+ IN UINT32 HtPhyLinkFeat,
+ IN UINT32 Address,
+ IN UINT32 Data,
+ IN UINT32 Mask
+ );
+
+VOID
+IdsLibPciWriteBitsToAllNode (
+ IN PCI_ADDR PciAddress,
+ IN UINT8 Highbit,
+ IN UINT8 Lowbit,
+ IN UINT32 *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+VOID
+IdsRunCodeOnCoreEarly (
+ IN UINT8 Socket,
+ IN UINT8 Core,
+ IN AP_TASK* ApTask,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+IdsGetMask64bits (
+ IN UINT64 RegVal,
+ IN UINT8 Highbit,
+ IN UINT8 Lowbit,
+ IN OUT UINT64 *AndMask,
+ IN OUT UINT64 *OrMask
+ );
+
+VOID
+IdsGetMask32bits (
+ IN UINT32 RegVal,
+ IN UINT8 Highbit,
+ IN UINT8 Lowbit,
+ IN OUT UINT32 *AndMask,
+ IN OUT UINT32 *OrMask
+ );
+
+VOID
+IdsGetMask16bits (
+ IN UINT16 RegVal,
+ IN UINT8 Highbit,
+ IN UINT8 Lowbit,
+ IN OUT UINT32 *AndMask,
+ IN OUT UINT32 *OrMask
+ );
+
+VOID
+IdsGetStartEndModule (
+ IN UINT8 ModuleId,
+ IN OUT UINT8 *StartModule,
+ IN OUT UINT8 *EndModule
+ );
+
+
+VOID
+IdsGetStartEndSocket (
+ IN UINT8 SocketId,
+ IN OUT UINT8 *StartSocket,
+ IN OUT UINT8 *EndSocket
+ );
+
+BOOLEAN
+IdsCheckPciExisit (
+ IN PCI_ADDR PciAddr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+IdsLibDataMaskSet32 (
+ IN OUT UINT32 *Value,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask
+ );
+#define IDS_CPB_BOOST_DIS_IGNORE 0xFFFFFFFFul
+
+#endif //_IDS_LIB_H_
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Library/IdsLib.c b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Library/IdsLib.c
new file mode 100644
index 0000000..50306bb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Library/IdsLib.c
@@ -0,0 +1,1015 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Integrated Debug library Routines
+ *
+ * Contains AMD AGESA debug macros and library functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuPstateTables.h"
+#include "IdsLib.h"
+#include "heapManager.h"
+
+#include "mm.h"
+#include "mn.h"
+#include "cpuLateInit.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_IDS_LIBRARY_IDSLIB_FILECODE
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern CPU_FAMILY_SUPPORT_TABLE PstateFamilyServiceTable;
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdGetIdsImagebase (
+ IN OUT UINT64 *IdsImageBase,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+/**
+ *
+ * Get IDS NV table pointer in the AGESA Heap.
+ *
+ * @param[in,out] IdsNvTable The Pointer of IDS NV Table.
+ * @param[in,out] StdHeader The Pointer of Standard Header.
+ *
+ * @retval AGESA_SUCCESS Success to get the pointer of NV Table.
+v * @retval AGESA_ERROR Fail to get the pointer of NV Table.
+ **/
+AGESA_STATUS
+AmdGetIdsNvTable (
+ IN OUT VOID **IdsNvTable,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS status;
+ LOCATE_HEAP_PTR LocateHeapStructPtr;
+ IDS_CONTROL_STRUCT *IdsCtrlPtr;
+
+ LocateHeapStructPtr.BufferHandle = IDS_CONTROL_HANDLE;
+ LocateHeapStructPtr.BufferPtr = NULL;
+ status = HeapLocateBuffer (&LocateHeapStructPtr, StdHeader);
+ if (status == AGESA_SUCCESS) {
+ IdsCtrlPtr = (IDS_CONTROL_STRUCT *) LocateHeapStructPtr.BufferPtr;
+ *IdsNvTable = LocateHeapStructPtr.BufferPtr + IdsCtrlPtr->IdsNvTableOffset;
+ }
+ return status;
+}
+
+/**
+ *
+ * Get IDS Override Image Base Address
+ *
+ * @param[in,out] IdsImageBase The Base Address of IDS Override Image.
+ * @param[in,out] StdHeader The Pointer of Standard Header.
+ *
+ * @retval AGESA_SUCCESS Success to get the pointer of NV Table.
+ * @retval AGESA_ERROR Fail to get the pointer of NV Table.
+ *
+ **/
+AGESA_STATUS
+AmdGetIdsImagebase (
+ IN OUT UINT64 *IdsImageBase,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS status;
+ LOCATE_HEAP_PTR LocateHeapStructPtr;
+ IDS_CONTROL_STRUCT *IdsCtrlPtr;
+
+ LocateHeapStructPtr.BufferHandle = IDS_CONTROL_HANDLE;
+ LocateHeapStructPtr.BufferPtr = NULL;
+ status = HeapLocateBuffer (&LocateHeapStructPtr, StdHeader);
+ if (status == AGESA_SUCCESS) {
+ IdsCtrlPtr = (IDS_CONTROL_STRUCT *) LocateHeapStructPtr.BufferPtr;
+ *IdsImageBase = IdsCtrlPtr->IdsImageBase;
+ }
+ return status;
+}
+
+/**
+ *
+ * Read IDS NV value in NV table.
+ *
+ * It searches the table until the Nv Id is found and return the NV value
+ * in the table. Otherwise, return IDS_UNSUPPORTED.
+ *
+ * @param[in] IdsNvId IDS NV ID
+ * @param[in] NvTablePtr NV Table pointer.
+ * @param[in,out] StdHeader The Pointer of Standard Header.
+ *
+ * @retval IDS_UNSUPPORTED NV ID is not found in the table
+ * Other Value The NV value
+ *
+ **/
+IDS_STATUS
+AmdIdsNvReader (
+ IN UINT16 IdsNvId,
+ IN IDS_NV_ITEM *NvTablePtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ IDS_STATUS Status;
+ IDS_NV_ITEM *NvPtr;
+ BOOLEAN IgnoreIdsDefault;
+ AGESA_STATUS status;
+ LOCATE_HEAP_PTR LocateHeapStructPtr;
+ IDS_CONTROL_STRUCT *IdsCtrlPtr;
+
+ IgnoreIdsDefault = FALSE;
+ Status = IDS_UNSUPPORTED;
+ NvPtr = NvTablePtr;
+
+ if (NvPtr != NULL) {
+ while (NvPtr->IdsNvId != AGESA_IDS_NV_END) {
+ if (NvPtr->IdsNvId == IdsNvId) {
+ break;
+ } else {
+ NvPtr ++;
+ }
+ }
+ if ((NvPtr->IdsNvId != AGESA_IDS_NV_END)) {
+ //Get IgnoreIdsDefault from heap
+ LocateHeapStructPtr.BufferHandle = IDS_CONTROL_HANDLE;
+ LocateHeapStructPtr.BufferPtr = NULL;
+ status = HeapLocateBuffer (&LocateHeapStructPtr, StdHeader);
+ if (status == AGESA_SUCCESS) {
+ IdsCtrlPtr = (IDS_CONTROL_STRUCT *) LocateHeapStructPtr.BufferPtr;
+ IgnoreIdsDefault = IdsCtrlPtr->IgnoreIdsDefault;
+ }
+
+ if (IgnoreIdsDefault || (NvPtr->IdsNvValue != AGESA_IDS_DFT_VAL)) {
+ Status = NvPtr->IdsNvValue;
+ }
+ }
+ }
+ return Status;
+}
+
+/**
+ * IDS function for only return IDS_SUCCESS
+ *
+ *
+ * @param[in,out] DataPtr meaningless data pointer
+ * @param[in,out] StdHeader The Pointer of AMD_CONFIG_PARAMS.
+ * @param[in] IdsNvPtr The Pointer of NV Table.
+ *
+ * @retval IDS_SUCCESS Always succeeds.
+ *
+ **/
+IDS_STATUS
+IdsCommonReturn (
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader,
+ IN IDS_NV_ITEM *IdsNvPtr
+ )
+{
+ return IDS_SUCCESS;
+}
+
+
+/**
+ * IDS function for ap run specific task after amdinitpost
+ *
+ *
+ * @param[in] ApicIdOfCore apic id of specific AP
+ * @param[in] ApLateTaskPtr The Pointer of IDSAPLATETASK.
+ * @param[in,out] StdHeader The Pointer of AMD_CONFIG_PARAMS.
+ *
+ * @retval AGESA_SUCCESS Success
+ * @retval AGESA_ERROR meet some error
+ *
+ **/
+AGESA_STATUS
+IdsAgesaRunFcnOnApLate (
+ IN UINTN ApicIdOfCore,
+ IN IDSAPLATETASK *ApLateTaskPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS Status;
+ AP_EXE_PARAMS LaunchApParams;
+
+//init AgesaRunFcnOnAp parameters
+ LaunchApParams.FunctionNumber = IDS_LATE_RUN_AP_TASK_ID;
+ LaunchApParams.RelatedBlockLength = SIZE_IN_DWORDS (IDSAPLATETASK);
+ LaunchApParams.RelatedDataBlock = ApLateTaskPtr;
+ LaunchApParams.StdHeader = *StdHeader;
+
+ AGESA_TESTPOINT (TpIfBeforeRunApFromIds, StdHeader);
+ Status = AgesaRunFcnOnAp ((UINTN) ApicIdOfCore, &LaunchApParams);
+ AGESA_TESTPOINT (TpIfAfterRunApFromIds, StdHeader);
+
+ return Status;
+}
+
+/**
+ * IDS function force all cores run specific task after amdinitpost
+ *
+ *
+ * @param[in] ApLateTaskPtr The Pointer of IDSAPLATETASK.
+ * @param[in,out] StdHeader The Pointer of AMD_CONFIG_PARAMS.
+ *
+ * @retval AGESA_SUCCESS Success
+ * @retval AGESA_ERROR meet some error
+ *
+ **/
+AGESA_STATUS
+IdsAgesaRunFcnOnAllCoresLate (
+ IN IDSAPLATETASK *ApLateTaskPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AP_EXE_PARAMS LaunchApParams;
+ AGESA_STATUS Status;
+
+//init AgesaRunFcnOnAp parameters
+ Status = AGESA_SUCCESS;
+ LaunchApParams.FunctionNumber = IDS_LATE_RUN_AP_TASK_ID;
+ LaunchApParams.RelatedBlockLength = SIZE_IN_DWORDS (IDSAPLATETASK);
+ LaunchApParams.RelatedDataBlock = ApLateTaskPtr;
+ LaunchApParams.StdHeader = *StdHeader;
+
+ Status = RunLateApTaskOnAllAPs (&LaunchApParams, StdHeader);
+
+//do it on Bsp
+ Status = ApLateTaskPtr->ApTask (ApLateTaskPtr->ApTaskPara, StdHeader);
+ return Status;
+}
+
+/**
+ * IDS call-back function for ApDispatchTable
+ *
+ * @param[in] AmdApExeParams AP_EXE_PARAMS.
+ *
+ * @retval AGESA_SUCCESS Success
+ * @retval AGESA_ERROR meet some error
+ *
+ **/
+AGESA_STATUS
+AmdIdsRunApTaskLate (
+ IN AP_EXE_PARAMS *AmdApExeParams
+ )
+{
+ IDSAPLATETASK *ApLateTaskPtr;
+ AGESA_STATUS Status;
+
+ ApLateTaskPtr = (IDSAPLATETASK *)AmdApExeParams->RelatedDataBlock;
+ Status = ApLateTaskPtr->ApTask (ApLateTaskPtr->ApTaskPara, &AmdApExeParams->StdHeader);
+ return Status;
+}
+
+/**
+ *
+ *
+ * IDS Common routine for run code on AP for both ealry & later stage
+ * This routine can only be used when AP service have been established
+ *
+ * @param[in] PIdsRuncodeParams Point to parameters structure
+ * @param[in,out] StdHeader - The Pointer of AGESA Header
+ *
+ */
+VOID
+IdsRunCodeOnCores (
+ IN IDS_RUNCODE_PARAMS *PIdsRuncodeParams,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AP_TASK ApTask;
+ IDSAPLATETASK IdsLateTask;
+ UINT32 NumberOfCores;
+ UINT8 StartSocket;
+ UINT8 EndSocket;
+ UINT8 Socket;
+ UINT8 StartCore;
+ UINT8 EndCore;
+ UINT8 Core;
+ UINT32 BscCoreNum;
+ UINT32 BscSocket;
+ UINT32 IgnoredModule;
+ UINT32 ApicIdOfCore;
+ AGESA_STATUS IgnoredSts;
+ IDS_AP_RUN_CODE_TIMEPOINT TimePoint;
+
+ TimePoint = PIdsRuncodeParams->TimePoint;
+ ASSERT ((TimePoint == IDS_AP_RUN_CODE_EARLY) ||
+ (TimePoint == IDS_AP_RUN_CODE_POST) ||
+ (TimePoint == IDS_AP_RUN_CODE_LATE));
+
+ IdentifyCore (StdHeader, &BscSocket, &IgnoredModule, &BscCoreNum, &IgnoredSts);
+ IdsGetStartEndSocket (PIdsRuncodeParams->Socket, &StartSocket, &EndSocket);
+ //TaskPtr for both IDS_AP_RUN_CODE_EARLY, IDS_AP_RUN_CODE_POST
+ ApTask.FuncAddress.PfApTaskIO = PIdsRuncodeParams->ApTask;
+ ApTask.ExeFlags = WAIT_FOR_CORE;
+ ApTask.DataTransfer.DataSizeInDwords = PIdsRuncodeParams->ParamsDataSizeInDwords;
+ ApTask.DataTransfer.DataPtr = PIdsRuncodeParams->ParamsDataPtr;
+ ApTask.DataTransfer.DataTransferFlags = 0;
+
+ for (Socket = StartSocket; Socket <= EndSocket; Socket++) {
+ if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+ if (PIdsRuncodeParams->Core == IDS_ALL_CORE) {
+ StartCore = 0;
+ EndCore = (UINT8)NumberOfCores - 1;
+ } else {
+ StartCore = PIdsRuncodeParams->Core;
+ EndCore = PIdsRuncodeParams->Core;
+ }
+ for (Core = StartCore; (Core <= EndCore) && (Core <= (NumberOfCores - 1)); Core++) {
+ if ((Core == BscCoreNum) && (Socket == BscSocket)) {
+ //Call function directly
+ PIdsRuncodeParams->ApTask (PIdsRuncodeParams->ParamsDataPtr, StdHeader);
+ } else {
+ if (IsProcessorPresent (Socket, StdHeader)) {
+ if (TimePoint == IDS_AP_RUN_CODE_EARLY) {
+ // At early stage, the AP's task has to be called by core 0, not by bsc
+ IdsRunCodeOnCoreEarly (Socket, Core, &ApTask, StdHeader);
+ } else if (TimePoint == IDS_AP_RUN_CODE_POST) {
+ ApUtilRunCodeOnSocketCore (Socket, Core, &ApTask, StdHeader);
+ } else if (TimePoint == IDS_AP_RUN_CODE_LATE) {
+ IdsLateTask.ApTask = (PF_IDS_AP_TASK)PIdsRuncodeParams->ApTask;
+ IdsLateTask.ApTaskPara = PIdsRuncodeParams->ParamsDataPtr;
+ GetLocalApicIdForCore (Socket, Core, &ApicIdOfCore, StdHeader);
+ IdsAgesaRunFcnOnApLate (ApicIdOfCore, &IdsLateTask, StdHeader);
+ }
+ }
+ }
+ }
+ }
+ }
+}
+
+/**
+ * Get the number of P-State to support
+ *
+ * @param[in,out] StdHeader The Pointer of AMD_CONFIG_PARAMS.
+ *
+ * @retval num The number of P-State to support.
+ *
+ **/
+UINT8
+IdsGetNumPstatesFamCommon (
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 pstatesnum;
+ UINT8 i;
+ UINT8 IgnoredByte;
+ UINT32 Ignored;
+ BOOLEAN PStateEnabled;
+ UINT32 TempVar_c;
+ PSTATE_CPU_FAMILY_SERVICES *FamilyServices;
+
+ pstatesnum = 0;
+ GetFeatureServicesOfCurrentCore (&PstateFamilyServiceTable, (CONST VOID **)&FamilyServices, StdHeader);
+ ASSERT (FamilyServices != NULL);
+
+ FamilyServices->GetPstateMaxState (FamilyServices, &TempVar_c, &IgnoredByte, StdHeader);
+ for (i = 0; i <= TempVar_c; i++) {
+ // Check if PState is enabled
+ FamilyServices->GetPstateRegisterInfo ( FamilyServices,
+ (UINT32) i,
+ &PStateEnabled,
+ &Ignored,
+ &Ignored,
+ &Ignored,
+ StdHeader);
+ if (PStateEnabled) {
+ pstatesnum++;
+ }
+ }
+ return pstatesnum;
+}
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * Runs the given task on all cores (including self) on the socket of the executing
+ * core 0.
+ *
+ * This function is used to invoke all APs on the socket of the executing core 0 to
+ * run a specified AGESA procedure.
+ *
+ * @param[in] TaskPtr Function descriptor
+ * @param[in] StdHeader Config handle for library and services
+ *
+ */
+VOID
+IdsApRunCodeOnAllLocalCores (
+ IN AP_TASK *TaskPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Core;
+ UINT32 BscCoreNum;
+ UINT32 Socket;
+ UINT32 BscSocket;
+ UINT32 IgnoredModule;
+ UINT32 NumberOfCores;
+ UINT32 NumberOfSockets;
+ AGESA_STATUS IgnoredSts;
+
+ IdentifyCore (StdHeader, &BscSocket, &IgnoredModule, &BscCoreNum, &IgnoredSts);
+ NumberOfSockets = GetPlatformNumberOfSockets ();
+
+
+ for (Socket = 0; Socket < NumberOfSockets; Socket++) {
+ if (GetActiveCoresInGivenSocket (Socket, &NumberOfCores, StdHeader)) {
+ for (Core = 0; Core < NumberOfCores; Core++) {
+ if ((Socket != (UINT32) BscSocket) || (Core != (UINT32) BscCoreNum)) {
+ ApUtilRunCodeOnSocketCore ((UINT8) Socket, (UINT8) Core, TaskPtr, StdHeader);
+ }
+ }
+ }
+ }
+ // BSP codes
+ ApUtilTaskOnExecutingCore (TaskPtr, StdHeader, NULL);
+}
+
+/**
+ * IdsMakePciRegEntry
+ *
+ *
+ * @param[in,out] TableEntry The Pointer of TableEntry
+* @param[in] Family Family
+* @param[in] Revision Revision
+* @param[in] PciAddr PCI address
+* @param[in] Data Or Mask
+* @param[in] Mask And Mask
+ *
+ *
+ */
+VOID
+IdsMakePciRegEntry (
+ IN OUT TABLE_ENTRY_FIELDS **TableEntry,
+ IN UINT64 Family,
+ IN UINT64 Revision,
+ IN UINT32 PciAddr,
+ IN UINT32 Data,
+ IN UINT32 Mask
+ )
+{
+ (*TableEntry)->EntryType = PciRegister;
+ (*TableEntry)->CpuRevision.Family = Family;
+ (*TableEntry)->CpuRevision.Revision = Revision;
+ (*TableEntry)->Features.PlatformValue = AMD_PF_ALL;
+ (*TableEntry)->Entry.PciEntry.Address.AddressValue = PciAddr;
+ (*TableEntry)->Entry.PciEntry.Data = Data;
+ (*TableEntry)->Entry.PciEntry.Mask = Mask;
+ (*TableEntry)++;
+}
+
+/**
+ * IdsMakeHtLinkPciRegEntry
+ *
+ *
+ * @param[in,out] TableEntry The Pointer of TableEntry
+* @param[in] Family Family
+* @param[in] Revision Revision
+* @param[in] HtHostFeat HtHostFeat
+* @param[in] PciAddr PCI address
+* @param[in] Data Or Mask
+* @param[in] Mask And Mask
+ *
+ *
+ */
+VOID
+IdsMakeHtLinkPciRegEntry (
+ IN OUT TABLE_ENTRY_FIELDS **TableEntry,
+ IN UINT64 Family,
+ IN UINT64 Revision,
+ IN UINT32 HtHostFeat,
+ IN UINT32 PciAddr,
+ IN UINT32 Data,
+ IN UINT32 Mask
+ )
+{
+ (*TableEntry)->EntryType = HtLinkPciRegister;
+ (*TableEntry)->CpuRevision.Family = Family;
+ (*TableEntry)->CpuRevision.Revision = Revision;
+ (*TableEntry)->Features.PlatformValue = AMD_PF_ALL;
+ (*TableEntry)->Entry.HtLinkPciEntry.LinkFeats.HtHostValue = HtHostFeat;
+ (*TableEntry)->Entry.HtLinkPciEntry.PciEntry.Address.AddressValue = PciAddr;
+ (*TableEntry)->Entry.HtLinkPciEntry.PciEntry.Data = Data;
+ (*TableEntry)->Entry.HtLinkPciEntry.PciEntry.Mask = Mask;
+ (*TableEntry)++;
+}
+/**
+ * IdsMakeHtFeatPciRegEntry
+ *
+ *
+ * @param[in,out] TableEntry The Pointer of TableEntry
+* @param[in] Family Family
+* @param[in] Revision Revision
+* @param[in] HtHostFeat HtHostFeat
+* @param[in] PackageType PackageType
+* @param[in] PciAddr PCI address
+* @param[in] Data Or Mask
+* @param[in] Mask And Mask
+ *
+ *
+ */
+VOID
+IdsMakeHtFeatPciRegEntry (
+ IN OUT TABLE_ENTRY_FIELDS **TableEntry,
+ IN UINT64 Family,
+ IN UINT64 Revision,
+ IN UINT32 HtHostFeat,
+ IN UINT32 PackageType,
+ IN UINT32 PciAddr,
+ IN UINT32 Data,
+ IN UINT32 Mask
+ )
+{
+ (*TableEntry)->EntryType = HtFeatPciRegister;
+ (*TableEntry)->CpuRevision.Family = Family;
+ (*TableEntry)->CpuRevision.Revision = Revision;
+ (*TableEntry)->Features.PlatformValue = AMD_PF_ALL;
+ (*TableEntry)->Entry.HtFeatPciEntry.LinkFeats.HtHostValue = HtHostFeat;
+ (*TableEntry)->Entry.HtFeatPciEntry.PackageType.PackageTypeValue = PackageType;
+ (*TableEntry)->Entry.HtFeatPciEntry.PciEntry.Address.AddressValue = PciAddr;
+ (*TableEntry)->Entry.HtFeatPciEntry.PciEntry.Data = Data;
+ (*TableEntry)->Entry.HtFeatPciEntry.PciEntry.Mask = Mask;
+ (*TableEntry)++;
+}
+/**
+ * IdsMakeHostPciRegEntry
+ *
+ *
+ * @param[in,out] TableEntry The Pointer of TableEntry
+* @param[in] Family Family
+* @param[in] Revision Revision
+* @param[in] HtHostFeat HtHostFeat
+* @param[in] PciAddr PCI address
+* @param[in] Data Or Mask
+* @param[in] Mask And Mask
+ *
+ *
+ */
+VOID
+IdsMakeHtHostPciRegEntry (
+ IN OUT TABLE_ENTRY_FIELDS **TableEntry,
+ IN UINT64 Family,
+ IN UINT64 Revision,
+ IN UINT32 HtHostFeat,
+ IN UINT32 PciAddr,
+ IN UINT32 Data,
+ IN UINT32 Mask
+ )
+{
+ (*TableEntry)->EntryType = HtHostPciRegister;
+ (*TableEntry)->CpuRevision.Family = Family;
+ (*TableEntry)->CpuRevision.Revision = Revision;
+ (*TableEntry)->Features.PlatformValue = AMD_PF_ALL;
+ (*TableEntry)->Entry.HtHostEntry.TypeFeats.HtHostValue = HtHostFeat;
+ (*TableEntry)->Entry.HtHostEntry.Address.AddressValue = PciAddr;
+ (*TableEntry)->Entry.HtHostEntry.Data = Data;
+ (*TableEntry)->Entry.HtHostEntry.Mask = Mask;
+ (*TableEntry)++;
+}
+/**
+ * IdsMakeHtPhyRegEntry
+ *
+ *
+ * @param[in,out] TableEntry The Pointer of TableEntry
+* @param[in] Family Family
+* @param[in] Revision Revision
+* @param[in] HtPhyLinkFeat HtPhyLinkFeat
+* @param[in] Address PCI address
+* @param[in] Data Or Mask
+* @param[in] Mask And Mask
+ *
+ *
+ */
+VOID
+IdsMakeHtPhyRegEntry (
+ IN OUT TABLE_ENTRY_FIELDS **TableEntry,
+ IN UINT64 Family,
+ IN UINT64 Revision,
+ IN UINT32 HtPhyLinkFeat,
+ IN UINT32 Address,
+ IN UINT32 Data,
+ IN UINT32 Mask
+ )
+{
+ (*TableEntry)->EntryType = HtPhyRegister;
+ (*TableEntry)->CpuRevision.Family = Family;
+ (*TableEntry)->CpuRevision.Revision = Revision;
+ (*TableEntry)->Features.PlatformValue = AMD_PF_ALL;
+ (*TableEntry)->Entry.HtPhyEntry.TypeFeats.HtPhyLinkValue = HtPhyLinkFeat;
+ (*TableEntry)->Entry.HtPhyEntry.Address = Address;
+ (*TableEntry)->Entry.HtPhyEntry.Data = Data;
+ (*TableEntry)->Entry.HtPhyEntry.Mask = Mask;
+ (*TableEntry)++;
+}
+
+/**
+ * IdsOptionCallout
+ *
+ * Description
+ * Call the host environment interface to provide a user hook opportunity.
+ *
+ * @param[in] CallOutId This parameter indicates the IDS Call-Out-function desired.
+ * @param[in,out] DataPtr The pointer for callout function use
+ * @param[in,out] StdHeader Config handle for library and services
+ *
+ * @retval AGESA_SUCCESS Success
+ * @retval AGESA_ERROR meet some error
+ *
+ */
+AGESA_STATUS
+IdsOptionCallout (
+ IN UINTN CallOutId,
+ IN OUT VOID *DataPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ IDS_CALLOUT_STRUCT IdsCalloutData;
+ IDS_NV_ITEM NullEntry;
+
+ NullEntry.IdsNvId = 0xFFFF;
+ NullEntry.IdsNvValue = 0xFFFF;
+ IdsCalloutData.StdHeader = *StdHeader;
+ IdsCalloutData.IdsNvPtr = &NullEntry;
+ IdsCalloutData.Reserved = (UINTN) DataPtr;
+
+ return AgesaGetIdsData (CallOutId, &IdsCalloutData);
+
+}
+
+/**
+ * Ids Write PCI register to All node
+ *
+ *
+ * @param[in] PciAddress Pci address
+ * @param[in] Highbit High bit position of the field in DWORD
+ * @param[in] Lowbit Low bit position of the field in DWORD
+ * @param[in] Value Pointer to input value
+ * @param[in] StdHeader Standard configuration header
+ *
+ */
+VOID
+IdsLibPciWriteBitsToAllNode (
+ IN PCI_ADDR PciAddress,
+ IN UINT8 Highbit,
+ IN UINT8 Lowbit,
+ IN UINT32 *Value,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ UINT32 Module;
+ AGESA_STATUS IgnoreStatus;
+ PCI_ADDR PciAddr;
+
+
+ for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
+ for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
+ if (GetPciAddress (StdHeader, Socket, Module, &PciAddr, &IgnoreStatus)) {
+ PciAddr.Address.Function = PciAddress.Address.Function;
+ PciAddr.Address.Register = PciAddress.Address.Register;
+ LibAmdPciWriteBits (PciAddr, Highbit, Lowbit, Value, StdHeader);
+ }
+ }
+ }
+}
+
+/**
+ *
+ *
+ * Core 0 task to run local ap task at early
+ *
+ * @param[in] PEarlyApTask - point to IDS_EARLY_AP_TASK structure
+ * @param[in,out] StdHeader - The Pointer of AGESA Header
+ *
+ */
+
+STATIC VOID
+IdsCmnTaskCore0Early (
+ IN IDS_EARLY_AP_TASK *PEarlyApTask,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 Socket;
+ UINT32 IgnoredModule;
+ UINT32 IgnoredCore;
+ AGESA_STATUS IgnoredSts;
+
+ ASSERT (PEarlyApTask->Ap_Task0.Core != 0);
+
+ PEarlyApTask->Ap_Task0.ApTask.DataTransfer.DataPtr = &PEarlyApTask->Parameters[0];
+ IdentifyCore (StdHeader, &Socket, &IgnoredModule, &IgnoredCore, &IgnoredSts);
+ ApUtilRunCodeOnSocketCore ((UINT8)Socket, PEarlyApTask->Ap_Task0.Core, &PEarlyApTask->Ap_Task0.ApTask, StdHeader);
+}
+
+/**
+ *
+ *
+ * BSC task to run Core0 task at early, must only run on BSC
+ *
+ * @param[in] Socket - Socket which run the task
+ * @param[in] Core - Core which run the task
+ * @param[in] ApTask - Task for AP
+ * @param[in,out] StdHeader - The Pointer of AGESA Header
+ *
+ */
+VOID
+IdsRunCodeOnCoreEarly (
+ IN UINT8 Socket,
+ IN UINT8 Core,
+ IN AP_TASK* ApTask,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT32 BscSocket;
+ UINT32 BscCoreNum;
+ UINT32 IgnoredModule;
+ AGESA_STATUS IgnoredSts;
+ AP_TASK Core0Task;
+ IDS_EARLY_AP_TASK IdsEarlyTask;
+
+ IdentifyCore (StdHeader, &BscSocket, &IgnoredModule, &BscCoreNum, &IgnoredSts);
+ ASSERT (~((Socket == BscSocket) && (Core == BscCoreNum)));
+ if ((Socket == BscSocket) || (Core == 0)) {
+ ApUtilRunCodeOnSocketCore (Socket, Core, ApTask, StdHeader);
+ } else {
+ //Init IDS_EARLY_AP_TASK for Core 0
+ IdsEarlyTask.Ap_Task0.ApTask = *ApTask;
+ IdsEarlyTask.Ap_Task0.Core = Core;
+ //Init Parameter buffer, Target core can't get the parameter from pointer, which point to Host Core memory space
+ ASSERT ((ApTask->DataTransfer.DataSizeInDwords * sizeof (UINT32)) <= IDS_EARLY_AP_TASK_PARA_NUM);
+ LibAmdMemCopy (&IdsEarlyTask.Parameters[0], ApTask->DataTransfer.DataPtr, sizeof (UINT32) * ApTask->DataTransfer.DataSizeInDwords, StdHeader);
+ if ((ApTask->DataTransfer.DataSizeInDwords * sizeof (UINT32)) <= IDS_EARLY_AP_TASK_PARA_NUM) {
+ //Lauch Core0 1st
+ Core0Task.FuncAddress.PfApTaskI = (PF_AP_TASK_I)IdsCmnTaskCore0Early;
+ Core0Task.ExeFlags = WAIT_FOR_CORE;
+ Core0Task.DataTransfer.DataSizeInDwords = SIZE_IN_DWORDS (IDS_EARLY_AP_TASK0) + ApTask->DataTransfer.DataSizeInDwords;
+ Core0Task.DataTransfer.DataPtr = &IdsEarlyTask;
+ Core0Task.DataTransfer.DataTransferFlags = 0;
+ ApUtilRunCodeOnSocketCore (Socket, 0, &Core0Task, StdHeader);
+ }
+ }
+}
+
+/**
+ *
+ *
+ * This function get start end Module according to input ModuleId
+ *
+ * @param[in] ModuleId - 0xFF means all nodes, other value Specifies real NodeId
+ * @param[in,out] StartModule - Point to start Node
+ * @param[in,out] EndModule - Point to end Node
+ *
+ */
+VOID
+IdsGetStartEndModule (
+ IN UINT8 ModuleId,
+ IN OUT UINT8 *StartModule,
+ IN OUT UINT8 *EndModule
+ )
+{
+ if (ModuleId == 0xFF) {
+ *StartModule = 0;
+ *EndModule = (UINT8) (GetPlatformNumberOfSockets () * GetPlatformNumberOfModules () - 1);
+ if (*EndModule > 7) {
+ *EndModule = 7;
+ }
+ } else {
+ *StartModule = ModuleId;
+ *EndModule = ModuleId;
+ }
+}
+
+/**
+ *
+ *
+ * This function get start end socket according to input SocketId
+ *
+ * @param[in] SocketId - 0xFF means all sockets, other value Specifies real SokcetId
+ * @param[in,out] StartSocket - Point to start Socket
+ * @param[in,out] EndSocket - Point to end Socket
+ *
+ */
+VOID
+IdsGetStartEndSocket (
+ IN UINT8 SocketId,
+ IN OUT UINT8 *StartSocket,
+ IN OUT UINT8 *EndSocket
+ )
+{
+ if (SocketId == IDS_ALL_SOCKET) {
+ *StartSocket = 0;
+ *EndSocket = (UINT8) (GetPlatformNumberOfSockets () - 1);
+ } else {
+ *StartSocket = SocketId;
+ *EndSocket = SocketId;
+ }
+}
+
+/**
+ *
+ *
+ * This function transfer input High low bit to Mask
+ *
+ * @param[in] RegVal - Regval want to set
+ * @param[in] Highbit - (0~63)
+ * @param[in] Lowbit - (0~63)
+ * @param[in,out] AndMask - point value contain output AndMask
+ * @param[in,out] OrMask - point value contain output OrMask
+ *
+ */
+VOID
+IdsGetMask64bits (
+ IN UINT64 RegVal,
+ IN UINT8 Highbit,
+ IN UINT8 Lowbit,
+ IN OUT UINT64 *AndMask,
+ IN OUT UINT64 *OrMask
+ )
+{
+ UINT64 Mask;
+
+ if ((Highbit - Lowbit) != 63) {
+ Mask = (((UINT64) 1 << (Highbit - Lowbit + 1)) - 1);
+ } else {
+ Mask = (UINT64) 0xFFFFFFFFFFFFFFFF;
+ }
+ *AndMask = ~(Mask << Lowbit);
+ *OrMask = (RegVal & Mask) << Lowbit;
+}
+/**
+ *
+ *
+ * This function transfer input High low bit to Mask
+ *
+ * @param[in] RegVal - Regval want to set
+ * @param[in] Highbit - (0~31)
+ * @param[in] Lowbit - (0~31)
+ * @param[in,out] AndMask - point value contain output AndMask
+ * @param[in,out] OrMask - point value contain output OrMask
+ *
+ */
+
+VOID
+IdsGetMask32bits (
+ IN UINT32 RegVal,
+ IN UINT8 Highbit,
+ IN UINT8 Lowbit,
+ IN OUT UINT32 *AndMask,
+ IN OUT UINT32 *OrMask
+ )
+{
+ UINT32 Mask;
+
+ if ((Highbit - Lowbit) != 31) {
+ Mask = (((UINT32) 1 << (Highbit - Lowbit + 1)) - 1);
+ } else {
+ Mask = (UINT32) 0xFFFFFFFF;
+ }
+ *AndMask = ~(Mask << Lowbit);
+ *OrMask = (RegVal & Mask) << Lowbit;
+
+}
+/**
+ *
+ *
+ * This function transfer input High low bit to Mask
+ *
+ * @param[in] RegVal - Regval want to set
+ * @param[in] Highbit - (0~15)
+ * @param[in] Lowbit - (0~15)
+ * @param[in,out] AndMask - point value contain output AndMask
+ * @param[in,out] OrMask - point value contain output OrMask
+ *
+ */
+
+VOID
+IdsGetMask16bits (
+ IN UINT16 RegVal,
+ IN UINT8 Highbit,
+ IN UINT8 Lowbit,
+ IN OUT UINT32 *AndMask,
+ IN OUT UINT32 *OrMask
+ )
+{
+ UINT16 Mask;
+
+ if ((Highbit - Lowbit) != 15) {
+ Mask = (((UINT16) 1 << (Highbit - Lowbit + 1)) - 1);
+ } else {
+ Mask = (UINT16) 0xFFFF;
+ }
+ *AndMask = ~(Mask << Lowbit);
+ *OrMask = (RegVal & Mask) << Lowbit;
+}
+
+/**
+ *
+ *
+ * IdsCheckPciExisit
+ * Use to check is the PCI device exisit of given address
+ *
+ * @param[in] PciAddr - Given PCI address
+ * @param[in,out] StdHeader - The Pointer of AGESA Header
+ *
+ * @retval TRUE The PCI device exisit
+ * @retval FALSE The PCI device doesn't exisit
+ *
+ *
+ */
+BOOLEAN
+IdsCheckPciExisit (
+ IN PCI_ADDR PciAddr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ PCI_ADDR _pciaddr;
+ UINT32 _pcidata;
+ BOOLEAN status;
+
+ status = FALSE;
+ _pciaddr = PciAddr;
+ _pciaddr.Address.Register = 0;
+ LibAmdPciRead (AccessWidth32, _pciaddr, &_pcidata, StdHeader);
+ if (_pcidata != 0xFFFFFFFF || _pcidata != 0) {
+ status = TRUE;
+ }
+ return status;
+}
+
+/**
+ *
+ *
+ * This function transfer input High low bit to Mask
+ *
+ * @param[in,out] Value - Regval want to And Or with Mask
+ * @param[in] AndMask - AndMask
+ * @param[in] OrMask - OrMask
+ *
+ */
+
+VOID
+IdsLibDataMaskSet32 (
+ IN OUT UINT32 *Value,
+ IN UINT32 AndMask,
+ IN UINT32 OrMask
+ )
+{
+ *Value &= AndMask;
+ *Value |= OrMask;
+}
+
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Library/IdsRegAcc.h b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Library/IdsRegAcc.h
new file mode 100644
index 0000000..1b9e02c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/Library/IdsRegAcc.h
@@ -0,0 +1,169 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * AMD Integrated Debug library Routines
+ *
+ * Contains AMD AGESA debug macros and library functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: IDS
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ ******************************************************************************
+ */
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+#ifndef _IDSREGACC_H_
+#define _IDSREGACC_H_
+#include "mm.h"
+#include "mn.h"
+
+///Structure define for MSR register
+typedef struct _IDS_REG_MSR {
+ IDS_AP_RUN_CODE_TIMEPOINT TimePoint; ///< TimePoint
+ UINT8 Socket; ///< Socket
+ UINT8 Core; ///< Core
+ UINT32 MsrAddr; ///< Address of MSR Register
+ UINT64 AndMask; ///< And Mask
+ UINT64 OrMask; ///< Or Mask
+} IDS_REG_MSR;
+
+///Structure define for DR register
+typedef struct _IDS_REG_DR {
+ IDS_AP_RUN_CODE_TIMEPOINT TimePoint; ///< TimePoint
+ UINT8 Socket; ///< Socket
+ UINT8 Core; ///< Core
+ UINT8 Drindex; ///< Debug register index from 0-7
+ UINT64 AndMask; ///< And Mask
+ UINT64 OrMask; ///< Or Mask
+} IDS_REG_DR;
+
+///Enum for Mem Register access Type
+typedef enum {
+ IDS_REG_MEM_NB, ///< PCI access
+ IDS_REG_MEM_PHY, ///< Memory Phy access
+ IDS_REG_MEM_EXTRA, ///< Memory Extra register access
+ IDS_REG_MEM_END, ///< End
+} IDS_REG_MEM_ACCESS_TYPE;
+
+///Structure define for Mem register
+typedef struct _IDS_REG_MEM {
+ IDS_REG_MEM_ACCESS_TYPE Type; ///< Type
+ UINT8 Module; ///< Module
+ UINT8 Dct; ///< Dct
+ union {
+ struct {
+ UINT8 Func; ///< PCI function
+ UINT16 Offset; ///< PCI offset
+ } PciAddr; ///< Pci Address
+ UINT32 Index; ///< index of indirect access
+ } Addr; ///< address
+ UINT32 AndMask; ///< And Mask
+ UINT32 OrMask; ///< Or Mask
+} IDS_REG_MEM;
+
+///Family register type
+typedef enum {
+ dummy0,
+ IDS_FAM_REG_TYPE_END, ///< End
+} IDS_FAM_REG_TYPE;
+
+typedef struct _IDS_REG_GMMX {
+ UINT32 Offset;
+ UINT32 AndMask;
+ UINT32 OrMask;
+} IdsRegAcc132_STRUCT;
+
+///Structure define for family specific register
+typedef struct _IDS_FAM_REG {
+ IDS_FAM_REG_TYPE Type; ///< Register type
+ union {
+ IdsRegAcc132_STRUCT IDS_FAM_REG_dum0;
+ } Reg;
+} IDS_FAM_REG;
+
+///Structure define for PCI indirect register
+typedef struct _IDS_REG_PCI_INDIRECT {
+ ACCESS_WIDTH Width; ///< access width
+ UINT32 PciAddr; ///< PCI address
+ UINT32 IndirectRegOff; ///< PCI indirect register offset
+ UINT32 WriteEnBit; ///< Write Enable bit
+ UINT32 AndMask; ///< And Mask
+ UINT32 OrMask; ///< Or Mask
+} IDS_REG_PCI_INDIRECT;
+
+VOID
+IdsRegSetMsrCmnTask (
+ IN IDS_REG_MSR *PRegMsr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+);
+
+VOID
+IdsRegSetMsr (
+ IN IDS_REG_MSR *PMsrReg,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+);
+
+AGESA_STATUS
+IdsRegSetMemBitField (
+ IN IDS_REG_MEM *PMemReg,
+ IN OUT MEM_NB_BLOCK *NBPtr
+);
+
+VOID
+IdsFamRegAccess (
+ IN IDS_FAM_REG *PFamReg,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+);
+
+VOID
+IdsRegSetPciIndirect (
+ IN IDS_REG_PCI_INDIRECT *PPciIndirectReg,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+);
+
+VOID
+IdsRegSetDrCmnTask (
+ IN IDS_REG_DR *PRegDr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+IdsRegSetDr (
+ IN IDS_REG_DR *PDrReg,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+
+#endif //_IDSREGACC_H_
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/IDS/OptionsIds.h b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/OptionsIds.h
new file mode 100644
index 0000000..10c2e4a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/IDS/OptionsIds.h
@@ -0,0 +1,92 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ * This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ * IDSOPT_IDS_ENABLED
+ * IDSOPT_ERROR_TRAP_ENABLED
+ * IDSOPT_CONTROL_ENABLED
+ *
+ * Warning: When you enable the IDSOPT_CONTROL_NV_TO_CMOS feature.
+ * please make the cmos region defined by IDS_OPT_CMOS_REGION_START &
+ * IDS_OPT_CMOS_REGION_END can be touched between IDS HOOK point
+ * IDS_CPU_Early_Override and IDS_BEFORE_AP_EARLY_HALT of BSP
+ *
+ * IDSOPT_CONTROL_NV_TO_CMOS
+ * IDS_OPT_CMOS_INDEX_PORT
+ * IDS_OPT_CMOS_DATA_PORT
+ * IDS_OPT_CMOS_REGION_START
+ * IDS_OPT_CMOS_REGION_END
+ *
+ * IDSOPT_TRACING_ENABLED
+ * IDSOPT_TRACING_CONSOLE_HDTOUT
+ * IDSOPT_TRACING_CONSOLE_SERIALPORT
+ * IDSOPT_SERIAL_PORT (default 0x3F8)
+ * IDSOPT_TRACING_CONSOLE_REDIRECT_IO
+ * IDSOPT_DEBUG_PRINT_IO_PORT (default 0x80)
+ * IDSOPT_TRACING_CONSOLE_RAM
+ * IDSOPT_DPRAM_BASE
+ * IDSOPT_DPRAM_SIZE
+ * IDSOPT_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL (default FALSE)
+ * IDSOPT_CUSTOMIZE_TRACING_SERVICE
+ * IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT
+ * IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT
+ *
+ * IDSOPT_TRACE_BLD_CFG
+ * IDSOPT_PERF_ANALYSIS
+ * IDSOPT_ASSERT_ENABLED
+ * IDS_DEBUG_PORT
+ * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ * IDSOPT_DEBUG_CODE_ENABLED
+ * IDSOPT_IDT_EXCEPTION_TRAP
+ * IDSOPT_C_OPTIMIZATION_DISABLED
+ *
+ **/
+
+#endif
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ardk/ma.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ardk/ma.c
new file mode 100644
index 0000000..664409e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ardk/ma.c
@@ -0,0 +1,145 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * ma.c
+ *
+ * Initializes ARDK Block
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ardk)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "ma.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_ARDK_MA_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This is the default return function of the ARDK block. The function always
+ * returns AGESA_UNSUPPORTED
+ *
+ * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE
+ * @param[in] SocketID Socket number
+ * @param[in] *CurrentChannel Pointer to CH_DEF_STRUCT
+ *
+ * @return AGESA_UNSUPPORTED AGESA status indicating that default is unsupported
+ *
+ */
+
+AGESA_STATUS
+MemAGetPsCfgDef (
+ IN OUT MEM_DATA_STRUCT *MemData,
+ IN UINT8 SocketID,
+ IN OUT CH_DEF_STRUCT *CurrentChannel
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function returns the rank type map of a channel.
+ *
+ * @param[in] *CurrentChannel Pointer to CH_DEF_STRUCT
+ *
+ * @return UINT16 - The map of rank type.
+ *
+ */
+UINT16
+MemAGetPsRankType (
+ IN CH_DEF_STRUCT *CurrentChannel
+ )
+{
+ UINT8 i;
+ UINT16 DIMMRankType;
+
+ DIMMRankType = 0;
+ for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+ if (CurrentChannel->MCTPtr->Status[SbLrdimms]) {
+ if ((CurrentChannel->LrDimmPresent & (UINT8) 1 << i) != 0) {
+ DIMMRankType |= (UINT16) 1 << (i << 2);
+ }
+ } else {
+ if ((CurrentChannel->DimmQrPresent & (UINT8) 1 << i) != 0) {
+ if (i < 2) {
+ DIMMRankType |= (UINT16) 4 << (i << 2);
+ }
+ } else if ((CurrentChannel->DimmDrPresent & (UINT8) 1 << i) != 0) {
+ DIMMRankType |= (UINT16) 2 << (i << 2);
+ } else if ((CurrentChannel->DimmSRPresent & (UINT8) 1 << i) != 0) {
+ DIMMRankType |= (UINT16) 1 << (i << 2);
+ }
+ }
+ }
+ return DIMMRankType;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/CRAT/mfCrat.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/CRAT/mfCrat.h
new file mode 100644
index 0000000..e7f9267
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/CRAT/mfCrat.h
@@ -0,0 +1,95 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfCrat.h
+ *
+ * Feature CRAT table support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+#ifndef _MFCRAT_H_
+#define _MFCRAT_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// DCT Select Interleaving Address Mapping
+typedef struct {
+ UINT8 DctSelIntLvAddr; ///< F2x110 DctSelIntLvAddr
+ UINT8 DctSelFunctionBit; ///< Lowest function bit to select DCT for interleaving
+} DCTSELBIT_ENTRY;
+
+/// CRAT Memory Affinity Info Header
+typedef struct {
+ UINT8 NumOfMemAffinityInfoEntries; ///< Integer that represents the proximity domain to
+ UINT32 MemoryWidth; ///< Specifies the number of parallel bits of the memory interface
+} CRAT_MEMORY_AFFINITY_INFO_HEADER;
+
+/// CRAT Memory Affinity Info Entry
+typedef struct {
+ UINT8 Domain; ///< Integer that represents the proximity domain to
+ ///< which the memory belongs
+ UINT32 BaseAddressLow; ///< Low 32Bits of the Base Address of the memory range
+ UINT32 BaseAddressHigh; ///< High 32Bits of the Base Address of the memory range
+ UINT32 LengthLow; ///< Low 32Bits of the length of the memory range
+ UINT32 LengthHigh; ///< High 32Bits of the length of the memory range
+} CRAT_MEMORY_AFFINITY_INFO_ENTRY;
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif /* _MFCRAT_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/CSINTLV/mfcsi.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/CSINTLV/mfcsi.c
new file mode 100644
index 0000000..8baba27
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/CSINTLV/mfcsi.c
@@ -0,0 +1,357 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfcsi.c
+ *
+ * Feature bank interleaving support (AKA Chip Select Interleaving )
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/Csintlv)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+/* This file contains functions for Chip Select interleaving */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mfcsi.h"
+#include "Ids.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_CSINTLV_MFCSI_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemFDctInterleaveBanks (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+STATIC
+CsIntSwap (
+ IN OUT UINT32 *BaseMaskRegPtr,
+ IN UINT8 EnChipSels,
+ IN UINT8 LoBit,
+ IN UINT8 HiBit
+ );
+
+BOOLEAN
+MemFUndoInterleaveBanks (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+/*
+ *-----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function Applies DIMM bank (chip-select) interleaving if enabled
+ * and if all criteria are met. Interleaves chip-selects on page boundaries.
+ * This function calls subfunctions that sets up CS interleaving on multiple Sockets
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - This feature is enabled.
+ * @return FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFInterleaveBanks (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+ BOOLEAN RetFlag;
+
+ ASSERT (NBPtr != NULL);
+
+ RetFlag = FALSE;
+ if (NBPtr->RefPtr->EnableBankIntlv) {
+ if (NBPtr->MCTPtr->NodeMemSize) {
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ RetFlag |= MemFDctInterleaveBanks (NBPtr);
+ }
+ }
+ }
+ return RetFlag;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function checks if bank interleaving has been enabled or not. If yes, it will
+ * undo bank interleaving. Otherwise, it does nothing.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - Bank interleaving has been enabled.
+ * @return FALSE - Bank interleaving has not been enabled.
+ */
+
+BOOLEAN
+MemFUndoInterleaveBanks (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Cs;
+ UINT8 Dct;
+ UINT32 CSMask;
+ BOOLEAN CSIntlvEnabled;
+ BOOLEAN RetFlag;
+
+ ASSERT (NBPtr != NULL);
+
+ RetFlag = FALSE;
+
+ if (NBPtr->RefPtr->EnableBankIntlv) {
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize) {
+ CSIntlvEnabled = FALSE;
+ for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs++) {
+ if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 1) != 0) {
+ CSMask = NBPtr->GetBitField (NBPtr, BFCSMask0Reg + (Cs / 2));
+ if (((CSMask >> 5) & 0x1FF) != 0x1FF) {
+ CSIntlvEnabled = TRUE;
+ break;
+ }
+ }
+ }
+ if (CSIntlvEnabled) {
+ MemFDctInterleaveBanks (NBPtr);
+ RetFlag = TRUE;
+ }
+ }
+ }
+ }
+ return RetFlag;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function Applies DIMM bank (chip-select) interleaving if enabled
+ * and if all criteria are met. Interleaves chip-selects on page boundaries.
+ * This function is run once per Socket
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - Register bits have been swapped.
+ * @return FALSE - Register bits have not been swapped.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemFDctInterleaveBanks (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Cs;
+ UINT8 EnChipSels;
+ UINT8 BankEncd;
+ UINT8 BankEncd0;
+ UINT8 i;
+ UINT8 j;
+ UINT32 BankAddrReg;
+ UINT32 BaseRegS0;
+ UINT32 BaseRegS1;
+ UINT32 MaskReg;
+ UINT8 Offset;
+ UINT8 Dct;
+
+ ASSERT (NBPtr != NULL);
+
+ Dct = NBPtr->Dct;
+
+ // Check if CS interleaving can be enabled
+ EnChipSels = 0;
+ BankEncd0 = 0xFF;
+ Offset = 0;
+ for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs++) {
+ if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 3) != 0) {
+ BankAddrReg = NBPtr->GetBitField (NBPtr, BFDramBankAddrReg);
+ BankEncd = (UINT8) ((BankAddrReg >> ((Cs / 2) * 4)) & 0xF);
+ if (BankEncd0 == 0xFF) {
+ BankEncd0 = BankEncd;
+ } else if (BankEncd0 != BankEncd) {
+ break;
+ }
+ if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 1) != 0) {
+ EnChipSels++;
+ }
+ }
+ }
+
+ // Swap Dram Base/Mask Addr to enable CS interleaving
+ if ((Cs == MAX_CS_PER_CHANNEL) && ((EnChipSels == 2) || (EnChipSels == 4) || (EnChipSels == 8))) {
+ NBPtr->TechPtr->GetCSIntLvAddr (BankEncd0, &i, &j);
+ NBPtr->DCTPtr->BankAddrMap = BankEncd0;
+ NBPtr->DCTPtr->EnabledChipSels = EnChipSels;
+ // Family specific CS interleaving low address adjustment
+ NBPtr->FamilySpecificHook[AdjustCSIntLvLowAddr] (NBPtr, &i);
+
+ if (NBPtr->MCTPtr->Status[Sb128bitmode]) {
+ i++;
+ j++;
+ }
+
+ for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs += 2) {
+ //
+ // LRDIMMS - Add an offset to the bit positions specified based on D18F2x[6C:60]_dct[1:0][RankDef] as follows:
+ // RankDef=0xb: 0 RankDef=10b: 1 RankDef=11b: 2
+ // Using RankMult information: Lo/HiBit <<= (Mult >> 1)
+ //
+ if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+ Offset = ((NBPtr->ChannelPtr->LrDimmRankMult[Cs >> 1]) >> 1);
+ }
+ BaseRegS0 = NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs);
+ BaseRegS1 = NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs + 1);
+ if (((BaseRegS0 | BaseRegS1) & 1) != 0) {
+ // Swap Mask register bits
+ MaskReg = NBPtr->GetBitField (NBPtr, BFCSMask0Reg + (Cs / 2));
+ CsIntSwap (&MaskReg, EnChipSels, (i + Offset), (j + Offset));
+ NBPtr->SetBitField (NBPtr, BFCSMask0Reg + (Cs / 2), MaskReg);
+
+ // Swap Base register bits
+ CsIntSwap (&BaseRegS0, EnChipSels, (i + Offset), (j + Offset));
+ NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + Cs, BaseRegS0);
+ CsIntSwap (&BaseRegS1, EnChipSels, (i + Offset), (j + Offset));
+ NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + Cs + 1, BaseRegS1);
+ }
+ }
+ //
+ // Bank Interleaving is requested and has been enabled as well
+ //
+ NBPtr->MCTPtr->DctData[Dct].BkIntDis = FALSE;
+ return TRUE;
+ } else {
+ //
+ // Bank Interleaving is requested but cannot be enabled
+ //
+ PutEventLog (AGESA_WARNING, MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_WARNING, NBPtr->MCTPtr);
+ NBPtr->MCTPtr->DctData[Dct].BkIntDis = TRUE;
+ }
+ return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This supporting function swaps Chip selects
+ *
+ * @param[in,out] *BaseMaskRegPtr - Pointer to the Mask Register
+ * @param[in] *EnChipSels - Chip Selects to Enable
+ * @param[in] *LoBit - Lowest Bit
+ * @param[in] *HiBit - Highest Bit
+ *
+ *
+ */
+
+VOID
+STATIC
+CsIntSwap (
+ IN OUT UINT32 *BaseMaskRegPtr,
+ IN UINT8 EnChipSels,
+ IN UINT8 LoBit,
+ IN UINT8 HiBit
+ )
+{
+ UINT8 BitDelta;
+ UINT32 TempHi;
+ UINT32 TempLo;
+ UINT32 AddrLoMask;
+ UINT32 AddrHiMask;
+
+ ASSERT (BaseMaskRegPtr != NULL);
+ ASSERT (HiBit > LoBit);
+
+ BitDelta = HiBit - LoBit;
+ AddrLoMask = (((UINT32)EnChipSels) - 1) << LoBit;
+ AddrHiMask = AddrLoMask << BitDelta;
+
+ TempHi = TempLo = *BaseMaskRegPtr;
+ TempLo &= AddrLoMask;
+ TempLo <<= BitDelta; // move lower bits to upper bit position
+ TempHi &= AddrHiMask;
+ TempHi >>= BitDelta; // move upper bits to lower bit position
+
+ *BaseMaskRegPtr &= ~AddrLoMask;
+ *BaseMaskRegPtr &= ~AddrHiMask;
+ *BaseMaskRegPtr |= TempLo | TempHi;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/CSINTLV/mfcsi.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/CSINTLV/mfcsi.h
new file mode 100644
index 0000000..b660f05
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/CSINTLV/mfcsi.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfcsi.h
+ *
+ * Memory Controller
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+#ifndef _MFCSI_H_
+#define _MFCSI_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFInterleaveBanks (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+#endif /* _MFCSI_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/DMI/mfDMI.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/DMI/mfDMI.c
new file mode 100644
index 0000000..af7bdaf
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/DMI/mfDMI.c
@@ -0,0 +1,721 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfDMI.c
+ *
+ * Memory DMI table support.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "cpuServices.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_DMI_MFDMI_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define MAX_DCTS_PER_DIE 2
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+UINT64
+MemFGetNodeMemBase (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 NodeLimit
+ );
+
+UINT64
+MemFGetDctMemBase (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 DctLimit
+ );
+
+UINT64
+MemFGetDctInterleavedMemSize (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT64
+MemFGetDctInterleavedLimit (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Dct,
+ IN UINT64 DctMemBase,
+ IN UINT64 DctInterleavedMemSize
+ );
+
+BOOLEAN
+MemFDMISupport3 (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets DDR3 DMI information from SPD buffer and stores the info into heap
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ */
+BOOLEAN
+MemFDMISupport3 (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 i;
+ UINT8 Dimm;
+ UINT8 Socket;
+ UINT8 NodeId;
+ UINT8 Dct;
+ UINT8 Channel;
+ UINT8 temp;
+ UINT16 LocalHandle;
+ UINT8 MaxPhysicalDimms;
+ UINT8 MaxLogicalDimms;
+ UINT8 NumLogicalDimms;
+ UINT32 *TotalMemSizePtr;
+ UINT8 *DmiTable;
+ UINT8 MaxChannelsPerSocket;
+ UINT8 MaxDimmsPerChannel;
+ UINT8 FormFactor;
+ UINT16 TotalWidth;
+ UINT16 Capacity;
+ UINT16 Width;
+ UINT16 Rank;
+ UINT16 BusWidth;
+ UINT64 ManufacturerIdCode;
+ UINT32 MaxSockets;
+ UINT32 Address;
+ UINT8 ChipSelectPairScale;
+ UINT32 TotalSize;
+ UINT32 DimmSize;
+ UINT32 CsBaseAddrReg0;
+ UINT32 CsBaseAddrReg1;
+ UINT64 AddrValue;
+ UINT64 DctMemBase;
+ UINT64 NodeMemBase;
+ UINT64 SysMemSize;
+ INT32 MTB_ps;
+ INT32 FTB_ps;
+ INT32 Value32;
+ BOOLEAN DctInterleaveEnabled;
+ UINT64 DctInterleavedMemSize;
+ BOOLEAN NodeInterleaveEnabled;
+ UINT16 T17HandleMatrix[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL];
+
+ MEM_NB_BLOCK *NBPtr;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ MEM_DATA_STRUCT *MemPtr;
+ DIE_STRUCT *MCTPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+ SPD_DEF_STRUCT *SpdDataStructure;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ MEM_DMI_PHYSICAL_DIMM_INFO *DmiPhysicalDimmInfoTable;
+ MEM_DMI_LOGICAL_DIMM_INFO *DmiLogicalDimmInfoTable;
+ DMI_T17_MEMORY_TYPE *DmiType17MemTypePtr;
+
+ NBPtr = MemMainPtr->NBPtr;
+ MemPtr = MemMainPtr->MemPtr;
+ SpdDataStructure = MemPtr->SpdDataStructure;
+ MCTPtr = NBPtr->MCTPtr;
+ RefPtr = MemPtr->ParameterListPtr;
+
+ // Initialize local variables
+ LocalHandle = 1;
+ MaxPhysicalDimms = 0;
+ MaxLogicalDimms = 0;
+ NumLogicalDimms = 0;
+ TotalSize = 0;
+ NodeMemBase = 0;
+ SysMemSize = 0;
+
+ AGESA_TESTPOINT (TpProcMemDmi, &MemPtr->StdHeader);
+
+ ASSERT (NBPtr != NULL);
+
+ MaxSockets = (UINT8) (0x000000FF & GetPlatformNumberOfSockets ());
+ for (Socket = 0; Socket < MaxSockets; Socket++) {
+ for (Channel = 0; Channel < GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader); Channel++) {
+ temp = (UINT8) GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel);
+ MaxPhysicalDimms = MaxPhysicalDimms + temp;
+ MaxLogicalDimms += MAX_DIMMS_PER_CHANNEL;
+ }
+ }
+
+ // Allocate heap for memory DMI table 16, 17, 19, 20
+ AllocHeapParams.RequestedBufferSize = sizeof (UINT8) + // Storage for MaxPhysicalDimms
+ sizeof (UINT8) + // Storage for Type Detail
+ sizeof (UINT32) + // Storage for Total Memory Size
+ sizeof (DMI_T17_MEMORY_TYPE) +
+ MaxPhysicalDimms * sizeof (MEM_DMI_PHYSICAL_DIMM_INFO) +
+ sizeof (UINT8) + // Storage for MaxLogicalDimms
+ MaxLogicalDimms * sizeof (MEM_DMI_LOGICAL_DIMM_INFO);
+
+ AllocHeapParams.BufferHandle = AMD_DMI_MEM_DEV_INFO_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader)) {
+ PutEventLog (AGESA_CRITICAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader);
+ SetMemError (AGESA_CRITICAL, MCTPtr);
+ // Could not allocate heap for memory DMI table 16,17,19 and 20 for DDR3
+ ASSERT (FALSE);
+ return FALSE;
+ }
+
+ DmiTable = (UINT8 *) AllocHeapParams.BufferPtr;
+ // Max number of physical DIMMs
+ *DmiTable = MaxPhysicalDimms;
+ DmiTable ++;
+ // Type Detail;
+ *DmiTable = 0;
+ DmiTable ++;
+ // Pointer to total memory size
+ TotalMemSizePtr = (UINT32 *) DmiTable;
+ DmiTable += sizeof (UINT32);
+ // Memory Type
+ DmiType17MemTypePtr = (DMI_T17_MEMORY_TYPE *) DmiTable;
+ *DmiType17MemTypePtr = Ddr3MemType;
+ DmiType17MemTypePtr ++;
+ DmiTable = (UINT8 *) DmiType17MemTypePtr;
+ // Pointer to DMI info of Physical DIMMs
+ DmiPhysicalDimmInfoTable = (MEM_DMI_PHYSICAL_DIMM_INFO *) DmiTable;
+
+ //
+ // Gather physical DIMM DMI info
+ //
+ for (Socket = 0; Socket < MaxSockets; Socket ++) {
+ MaxChannelsPerSocket = GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader);
+ DctMemBase = 0;
+ for (Channel = 0; Channel < MaxChannelsPerSocket; Channel ++) {
+ //
+ // Get Node number and Dct number for this channel
+ //
+ ChannelPtr = MemPtr->SocketList[Socket].ChannelPtr[Channel];
+ NodeId = ChannelPtr->MCTPtr->NodeId;
+ NBPtr = MemMainPtr->NBPtr;
+ Dct = ChannelPtr->Dct;
+ NBPtr = &NBPtr[NodeId];
+ NBPtr->SwitchDCT (NBPtr, Dct);
+
+ MaxDimmsPerChannel = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel);
+ for (Dimm = 0; Dimm < MaxDimmsPerChannel; Dimm ++, SpdDataStructure ++, LocalHandle++) {
+ //
+ // Initialize default value for DMI fields
+ //
+ DmiPhysicalDimmInfoTable->DimmPresent = 0;
+ DmiPhysicalDimmInfoTable->Socket = Socket;
+ DmiPhysicalDimmInfoTable->Channel = Channel;
+ DmiPhysicalDimmInfoTable->Dimm = Dimm;
+ DmiPhysicalDimmInfoTable->TotalWidth = 0xFFFF;
+ DmiPhysicalDimmInfoTable->DataWidth = 0xFFFF;
+ DmiPhysicalDimmInfoTable->MemorySize = 0;
+ DmiPhysicalDimmInfoTable->Speed = 0;
+ DmiPhysicalDimmInfoTable->ManufacturerIdCode = 0;
+ DmiPhysicalDimmInfoTable->Attributes = 0;
+ DmiPhysicalDimmInfoTable->ConfigSpeed = 0;
+ DmiPhysicalDimmInfoTable->ExtSize = 0;
+ DmiPhysicalDimmInfoTable->FormFactor = UnknowFormFactor;
+ DmiPhysicalDimmInfoTable->Handle = LocalHandle;
+ T17HandleMatrix[Socket][Channel][Dimm] = LocalHandle;
+
+ for (i = 0; i < 4; i++) {
+ DmiPhysicalDimmInfoTable->SerialNumber[i] = 0xFF;
+ }
+
+ for (i = 0; i < 18; i++) {
+ DmiPhysicalDimmInfoTable->PartNumber[i] = 0x0;
+ }
+
+ if (SpdDataStructure->DimmPresent) {
+ // Total Width (offset 08h) & Data Width (offset 0Ah)
+ TotalWidth = (UINT16) SpdDataStructure->Data[8];
+ if ((TotalWidth & 0x18) == 0) {
+ // non ECC
+ if ((TotalWidth & 0x07) == 0) {
+ DmiPhysicalDimmInfoTable->TotalWidth = 8; // 8 bits
+ } else if ((TotalWidth & 0x07) == 1) {
+ DmiPhysicalDimmInfoTable->TotalWidth = 16; // 16 bits
+ } else if ((TotalWidth & 0x07) == 2) {
+ DmiPhysicalDimmInfoTable->TotalWidth = 32; // 32 bits
+ } else if ((TotalWidth & 0x07) == 3) {
+ DmiPhysicalDimmInfoTable->TotalWidth = 64; // 64 bits
+ }
+ DmiPhysicalDimmInfoTable->DataWidth = DmiPhysicalDimmInfoTable->TotalWidth ;
+ } else {
+ // ECC
+ if ((TotalWidth & 0x07) == 0) {
+ DmiPhysicalDimmInfoTable->TotalWidth = 8 + 8; // 8 bits
+ } else if ((TotalWidth & 0x07) == 1) {
+ DmiPhysicalDimmInfoTable->TotalWidth = 16 + 8; // 16 bits
+ } else if ((TotalWidth & 0x07) == 2) {
+ DmiPhysicalDimmInfoTable->TotalWidth = 32 + 8; // 32 bits
+ } else if ((TotalWidth & 0x07) == 3) {
+ DmiPhysicalDimmInfoTable->TotalWidth = 64 + 8; // 64 bits
+ }
+ DmiPhysicalDimmInfoTable->DataWidth = DmiPhysicalDimmInfoTable->TotalWidth - 8;
+ }
+
+ // Memory Size (offset 0Ch)
+ Capacity = 0;
+ BusWidth = 0;
+ Width = 0;
+ Rank = 0;
+ temp = (UINT8) SpdDataStructure->Data[4];
+ if ((temp & 0x0F) == 0) {
+ Capacity = 0x0100; // 256M
+ } else if ((temp & 0x0F) == 1) {
+ Capacity = 0x0200; // 512M
+ } else if ((temp & 0x0F) == 2) {
+ Capacity = 0x0400; // 1G
+ } else if ((temp & 0x0F) == 3) {
+ Capacity = 0x0800; // 2G
+ } else if ((temp & 0x0F) == 4) {
+ Capacity = 0x1000; // 4G
+ } else if ((temp & 0x0F) == 5) {
+ Capacity = 0x2000; // 8G
+ } else if ((temp & 0x0F) == 6) {
+ Capacity = 0x4000; // 16G
+ }
+
+ temp = (UINT8) SpdDataStructure->Data[8];
+ if ((temp & 0x07) == 0) {
+ BusWidth = 8; // 8 bits
+ } else if ((temp & 0x07) == 1) {
+ BusWidth = 16; // 16 bits
+ } else if ((temp & 0x07) == 2) {
+ BusWidth = 32; // 32 bits
+ } else if ((temp & 0x07) == 3) {
+ BusWidth = 64; // 64 bits
+ }
+
+ temp = (UINT8) SpdDataStructure->Data[7];
+ if ((temp & 0x07) == 0) {
+ Width = 4; // 4 bits
+ } else if ((temp & 0x07) == 1) {
+ Width = 8; // 8 bits
+ } else if ((temp & 0x07) == 2) {
+ Width = 16; // 16 bits
+ } else if ((temp & 0x07) == 3) {
+ Width = 32; // 32 bits
+ }
+
+ temp = (UINT8) SpdDataStructure->Data[7];
+ if (((temp >> 3) & 0x07) == 0) {
+ Rank = 1; // 4 bits
+ DmiPhysicalDimmInfoTable->Attributes = 1; // Single Rank Dimm
+ } else if (((temp >> 3) & 0x07) == 1) {
+ Rank = 2; // 8 bits
+ DmiPhysicalDimmInfoTable->Attributes = 2; // Dual Rank Dimm
+ } else if (((temp >> 3) & 0x07) == 2) {
+ Rank = 3; // 16 bits
+ } else if (((temp >> 3) & 0x07) == 3) {
+ Rank = 4; // 32 bits
+ DmiPhysicalDimmInfoTable->Attributes = 4; // Quad Rank Dimm
+ }
+
+ DimmSize = (UINT32) (Capacity / 8 * BusWidth / Width * Rank);
+ if (DimmSize < 0x7FFF) {
+ DmiPhysicalDimmInfoTable->MemorySize = (UINT16) DimmSize;
+ } else {
+ DmiPhysicalDimmInfoTable->MemorySize = 0x7FFF;
+ DmiPhysicalDimmInfoTable->ExtSize = DimmSize;
+ }
+
+ // Form Factor (offset 0Eh)
+ FormFactor = (UINT8) SpdDataStructure->Data[3];
+ if (((FormFactor & 0x0F) == 0x01) || ((FormFactor & 0x0F) == 0x02) || ((FormFactor & 0x0F) == 0x0B)) {
+ DmiPhysicalDimmInfoTable->FormFactor = 0x09; // RDIMM or UDIMM or LRDIMM
+ } else if ((FormFactor & 0x0F) == 0x03) {
+ DmiPhysicalDimmInfoTable->FormFactor = 0x0D; // SO-DIMM
+ } else {
+ DmiPhysicalDimmInfoTable->FormFactor = 0x02; // UNKNOWN
+ }
+
+ // DIMM Present
+ DmiPhysicalDimmInfoTable->DimmPresent = 1;
+
+ // Type Detail (offset 13h)
+ if (((FormFactor & 0x0F) == 0x01) || ((FormFactor & 0x0F) == 0x0B)) {
+ *((UINT8 *) (AllocHeapParams.BufferPtr) + 1) = 1; // Registered (Buffered)
+ } else {
+ *((UINT8 *) (AllocHeapParams.BufferPtr) + 1) = 2; // Unbuffered (Unregistered)
+ }
+
+ // Speed (offset 15h)
+ MTB_ps = ((INT32) SpdDataStructure->Data[10] * 1000) / SpdDataStructure->Data[11];
+ FTB_ps = (SpdDataStructure->Data[9] >> 4) / (SpdDataStructure->Data[9] & 0xF);
+ Value32 = (MTB_ps * SpdDataStructure->Data[12]) + (FTB_ps * (INT8) SpdDataStructure->Data[34]) ;
+ if (Value32 <= 938) {
+ DmiPhysicalDimmInfoTable->Speed = 1067; // DDR3-2133
+ } else if (Value32 <= 1071) {
+ DmiPhysicalDimmInfoTable->Speed = 933; // DDR3-1866
+ } else if (Value32 <= 1250) {
+ DmiPhysicalDimmInfoTable->Speed = 800; // DDR3-1600
+ } else if (Value32 <= 1500) {
+ DmiPhysicalDimmInfoTable->Speed = 667; // DDR3-1333
+ } else if (Value32 <= 1875) {
+ DmiPhysicalDimmInfoTable->Speed = 533; // DDR3-1066
+ } else if (Value32 <= 2500) {
+ DmiPhysicalDimmInfoTable->Speed = 400; // DDR3-800
+ }
+
+ // Manufacturer (offset 17h)
+ ManufacturerIdCode = (UINT64) SpdDataStructure->Data[118];
+ DmiPhysicalDimmInfoTable->ManufacturerIdCode = (ManufacturerIdCode << 8) | ((UINT64) SpdDataStructure->Data[117]);
+
+ // Serial Number (offset 18h)
+ for (i = 0; i < 4; i++) {
+ DmiPhysicalDimmInfoTable->SerialNumber[i] = (UINT8) SpdDataStructure->Data[i + 122];
+ }
+ // Part Number (offset 1Ah)
+ for (i = 0; i < 18; i++) {
+ DmiPhysicalDimmInfoTable->PartNumber[i] = (UINT8) SpdDataStructure->Data[i + 128];
+ }
+
+ // Configured Memory Clock Speed (offset 20h)
+ DmiPhysicalDimmInfoTable->ConfigSpeed = NBPtr->DCTPtr->Timings.Speed;
+ } // Dimm present
+ TotalSize += (UINT32) DmiPhysicalDimmInfoTable->MemorySize;
+ DmiPhysicalDimmInfoTable ++;
+ } // Dimm loop
+ } // Channel loop
+ } // Socket loop
+
+ // Max number of logical DIMMs
+ DmiTable = (UINT8 *) DmiPhysicalDimmInfoTable;
+ *DmiTable = MaxLogicalDimms;
+ DmiTable ++;
+
+ // Pointer to DMI info of Logical DIMMs
+ DmiLogicalDimmInfoTable = (MEM_DMI_LOGICAL_DIMM_INFO *) DmiTable;
+
+ // Calculate the total memory size in the system
+ SysMemSize = MemFGetNodeMemBase (MemMainPtr->NBPtr, MemPtr->DieCount);
+ //
+ // Gather logical DIMM DMI info
+ //
+ for (Socket = 0; Socket < MaxSockets; Socket ++) {
+ MaxChannelsPerSocket = GetMaxChannelsPerSocket (RefPtr->PlatformMemoryConfiguration, Socket, &MemPtr->StdHeader);
+ DctMemBase = 0;
+ for (Channel = 0; Channel < MaxChannelsPerSocket; Channel ++) {
+ MaxDimmsPerChannel = GetMaxDimmsPerChannel (RefPtr->PlatformMemoryConfiguration, Socket, Channel);
+ //
+ // Get Node number and Dct number for this channel
+ //
+ ChannelPtr = MemPtr->SocketList[Socket].ChannelPtr[Channel];
+ NodeId = ChannelPtr->MCTPtr->NodeId;
+ NBPtr = MemMainPtr->NBPtr;
+ Dct = ChannelPtr->Dct;
+ NodeMemBase = MemFGetNodeMemBase (NBPtr, NodeId);
+ NBPtr = &NBPtr[NodeId];
+
+ DctMemBase = MemFGetDctMemBase (NBPtr, Dct);
+ DctInterleavedMemSize = MemFGetDctInterleavedMemSize (NBPtr);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ NodeInterleaveEnabled = (NBPtr->GetBitField (NBPtr, BFDramIntlvEn) == 0) ? FALSE : TRUE;
+ DctInterleaveEnabled = (NBPtr->GetBitField (NBPtr, BFDctSelIntLvEn) == 0) ? FALSE : TRUE;
+
+ for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm ++, DmiLogicalDimmInfoTable ++) {
+ //
+ // Initialize default value for DMI fields
+ //
+ DmiLogicalDimmInfoTable->DimmPresent = 0;
+ DmiLogicalDimmInfoTable->Socket = Socket;
+ DmiLogicalDimmInfoTable->Channel = Channel;
+ DmiLogicalDimmInfoTable->Dimm = Dimm;
+ DmiLogicalDimmInfoTable->StartingAddr = 0;
+ DmiLogicalDimmInfoTable->EndingAddr = 0;
+ DmiLogicalDimmInfoTable->ExtStartingAddr = 0;
+ DmiLogicalDimmInfoTable->ExtEndingAddr = 0;
+ //
+ // Starting/Ending Address for each DIMM
+ //
+ // If Ending Address >= 0xFFFFFFFF, update Starting Address & Ending Address to 0xFFFFFFFF,
+ // and use the Extended Starting Address & Extended Ending Address instead.
+ //
+ CsBaseAddrReg0 = NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + 2 * Dimm);
+ CsBaseAddrReg1 = NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + 2 * Dimm + 1);
+ if ((CsBaseAddrReg0 & 1) != 0 || (CsBaseAddrReg1 & 1) != 0) {
+ ASSERT (NumLogicalDimms < MaxLogicalDimms);
+ NumLogicalDimms ++;
+ DmiLogicalDimmInfoTable->DimmPresent = 1;
+ if (Dimm < MaxDimmsPerChannel) {
+ // The logical DIMM is mapped from a SR/QR physical DIMM
+ DmiLogicalDimmInfoTable->MemoryDeviceHandle = T17HandleMatrix[Socket][Channel][Dimm];
+ } else {
+ // The logical DIMM is mapped from a QR physical DIMM
+ DmiLogicalDimmInfoTable->MemoryDeviceHandle = T17HandleMatrix[Socket][Channel][Dimm - 2];
+ }
+ //
+ // For DR and QR DIMMs, DIMM size should be scaled based on the CS pair presence
+ //
+ ChipSelectPairScale = ((CsBaseAddrReg0 & 1) != 0 && (CsBaseAddrReg1 & 1) != 0) ? 1 : 0;
+ Address = ((CsBaseAddrReg0 & 1) != 0 ? CsBaseAddrReg0 : CsBaseAddrReg1) & NBPtr->CsRegMsk;
+ Address = (Address & 0xFFFF0000) >> 2;
+ if (DctInterleaveEnabled) {
+ //
+ // When channel interleaving is enabled, all the DIMMs on the node share the same starting address
+ //
+ Address = (UINT32)NodeMemBase;
+ } else {
+ if (NBPtr->DCTPtr->BkIntDis == FALSE && NBPtr->RefPtr->EnableBankIntlv == TRUE) {
+ //
+ // When bank interleaving is enabled, all the chip selects share the same starting address
+ //
+ Address = (UINT32) (NodeMemBase + DctMemBase);
+ } else {
+ Address += (UINT32) (NodeMemBase + DctMemBase);
+ }
+ }
+ if (NodeInterleaveEnabled) {
+ //
+ // When node interleaving is enabled, all the DIMMs in the system share the same starting address
+ //
+ Address = 0;
+ }
+ DmiLogicalDimmInfoTable->StartingAddr = Address;
+ AddrValue = (UINT64) Address +
+ ((UINT64) ((NBPtr->GetBitField (NBPtr, BFCSMask0Reg + Dimm) & 0xFFFF0000) + 0x00080000) >>
+ (2 - ChipSelectPairScale) ) - 1;
+ if (NBPtr->DCTPtr->BkIntDis == FALSE && NBPtr->RefPtr->EnableBankIntlv == TRUE) {
+ //
+ // When bank interleaving is enabled, all the chip selects share the same ending address
+ //
+ AddrValue = NodeMemBase + DctMemBase + (NBPtr->DCTPtr->Timings.DctMemSize << 6) - 1;
+ }
+ if (DctInterleaveEnabled) {
+ //
+ // When channel interleaving is enabled, the interleaved range is accounted for in the ending address of each DCT
+ //
+ AddrValue = NodeMemBase + MemFGetDctInterleavedLimit (NBPtr, Dct, DctMemBase, DctInterleavedMemSize);
+ }
+ if (NodeInterleaveEnabled) {
+ //
+ // When node interleaving is enabled, all the DIMMs in the system share the same ending address
+ //
+ AddrValue = SysMemSize - 1;
+ }
+ if (AddrValue >= ((UINT64) 0xFFFFFFFF)) {
+ DmiLogicalDimmInfoTable->StartingAddr = 0xFFFFFFFFUL;
+ DmiLogicalDimmInfoTable->EndingAddr = 0xFFFFFFFFUL;
+ DmiLogicalDimmInfoTable->ExtStartingAddr = (UINT64) Address;
+ DmiLogicalDimmInfoTable->ExtEndingAddr = AddrValue;
+ } else {
+ DmiLogicalDimmInfoTable->EndingAddr = (UINT32) AddrValue;
+ }
+ }
+ } // Dimm loop
+ } // Channel loop
+ } // Socket loop
+
+ // Max Capacity
+ *TotalMemSizePtr = TotalSize;
+
+ return TRUE;
+}
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+/**
+ *
+ *
+ * This function obtains the memory size RJ6 contributed by the previous nodes
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] NodeLimit - Node number
+ *
+ */
+UINT64
+MemFGetNodeMemBase (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 NodeLimit
+ )
+{
+ UINT8 Node;
+ UINT64 NodeMemBase;
+
+ NodeMemBase = 0;
+ // Calculate the total memory size in the system
+ for (Node = 0; Node < NodeLimit; Node++) {
+ NodeMemBase += (NBPtr[Node].MCTPtr->NodeMemSize << 6);
+ }
+
+ return NodeMemBase;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function obtains the memory size RJ6 contributed by the previous dcts on
+ * the current node
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] DctLimit - Dct number
+ *
+ */
+UINT64
+MemFGetDctMemBase (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 DctLimit
+ )
+{
+ UINT8 Dct;
+ UINT64 DctMemBase;
+
+ DctMemBase = 0;
+ // Calculate the total memory size in the system
+ for (Dct = 0; Dct < DctLimit; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ DctMemBase += (NBPtr->DCTPtr->Timings.DctMemSize << 6);
+ }
+
+ return DctMemBase;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function obtains the interleaved memory size RJ6 contributed on the
+ * current dct
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+UINT64
+MemFGetDctInterleavedMemSize (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+ UINT64 DctInterleavedMemSize;
+
+ DctInterleavedMemSize = NBPtr->MCTPtr->NodeMemSize << 6;
+ // Find minimum memory size among the interleaved DCTs
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (DctInterleavedMemSize > (NBPtr->DCTPtr->Timings.DctMemSize << 6)) {
+ DctInterleavedMemSize = (NBPtr->DCTPtr->Timings.DctMemSize << 6);
+ }
+ }
+
+ return DctInterleavedMemSize;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function obtains the memory ending address RJ6 contributed by a dct
+ * under channel interleaving
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Dct - Dct number
+ * @param[in] DctMemBase - Dct memory base
+ * @param[in] DctInterleavedMemSize - Dct interleaved memory size
+ *
+ */
+UINT64
+MemFGetDctInterleavedLimit (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Dct,
+ IN UINT64 DctMemBase,
+ IN UINT64 DctInterleavedMemSize
+ )
+{
+ UINT64 DctMemLimit;
+ UINT8 i;
+
+ DctMemLimit = 0;
+ if (DctInterleavedMemSize == NBPtr->DCTPtr->Timings.DctMemSize << 6) {
+ // The whole memory range is interleaved for the DCTs with the minimum memory size
+ for (i = 0; i < NBPtr->DctCount; i++) {
+ DctMemLimit += DctInterleavedMemSize;
+ }
+ DctMemLimit -= 1;
+ } else {
+ // Part of the memory range is interleaved for the DCTs with memory size larger than
+ // the minimum. The remaining is treated as non-interleaved.
+ for (i = 0; i < NBPtr->DctCount - 1 - Dct; i++) {
+ DctMemLimit += DctInterleavedMemSize;
+ }
+ DctMemLimit += DctMemBase + (NBPtr->DCTPtr->Timings.DctMemSize << 6) - 1;
+ }
+
+ return DctMemLimit;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ECC/mfecc.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ECC/mfecc.c
new file mode 100644
index 0000000..7ff3960
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ECC/mfecc.c
@@ -0,0 +1,290 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfecc.c
+ *
+ * Feature ECC initialization functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/ECC)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mfecc.h"
+#include "Filecode.h"
+#include "mfmemclr.h"
+#include "GeneralServices.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_ECC_MFECC_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+InitECCOverriedeStruct (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT ECC_OVERRIDE_STRUCT *pecc_override_struct
+ );
+
+BOOLEAN
+MemFCheckECC (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+/*
+ *-----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function checks to see if ECC can be enabled on all nodes
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - This feature is enabled.
+ * @return FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFCheckECC (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ DIE_STRUCT *MCTPtr;
+ MEM_SHARED_DATA *SharedPtr;
+ BOOLEAN ErrorRecovery;
+
+ ASSERT (NBPtr != NULL);
+
+ MCTPtr = NBPtr->MCTPtr;
+ SharedPtr = NBPtr->SharedPtr;
+
+ ErrorRecovery = TRUE;
+ IDS_OPTION_HOOK (IDS_MEM_ERROR_RECOVERY, &ErrorRecovery, &NBPtr->MemPtr->StdHeader);
+
+ if (MCTPtr->NodeMemSize != 0) {
+ if (SharedPtr->AllECC && MCTPtr->Status[SbEccDimms] && (ErrorRecovery || (MCTPtr->ErrCode < AGESA_ERROR))) {
+ // Clear all MCA reports before using scrubber
+ // to initialize ECC check bits
+ //
+ NBPtr->McaNbCtlReg = NBPtr->GetBitField (NBPtr, BFMcaNbCtlReg);
+ NBPtr->SetBitField (NBPtr, BFMcaNbCtlReg, 0);
+ NBPtr->SetBitField (NBPtr, BFSyncOnUcEccEn, 0);
+ // In unganged mode, set DctDctIntlv
+ if (!NBPtr->Ganged) {
+ NBPtr->SetBitField (NBPtr, BFDctDatIntLv, 1);
+ }
+ //
+ // Set Ecc Symbol Size
+ //
+ NBPtr->SetEccSymbolSize (NBPtr);
+ // If ECC can be enabled on this node,
+ // set the master ECCen bit (according to setup)
+ //
+ NBPtr->SetBitField (NBPtr, BFDramEccEn, 1);
+ // Do mem clear on current node
+ MemFMctMemClr_Init (NBPtr);
+ return TRUE;
+ } else {
+ if (SharedPtr->AllECC) {
+ SharedPtr->AllECC = FALSE;
+ }
+ // ECC requested but cannot be enabled
+ MCTPtr->Status[SbEccDimms] = FALSE;
+ MCTPtr->ErrStatus[EsbDramECCDis] = TRUE;
+ PutEventLog (AGESA_WARNING, MEM_WARNING_ECC_DIS, NBPtr->Node, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_WARNING, MCTPtr);
+ }
+ }
+ return FALSE;
+}
+
+ /* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes the ECC on all nodes
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - This feature is enabled.
+ * @return FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFInitECC (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Node;
+ UINT32 ScrubAddrRJ16;
+ DIE_STRUCT *MCTPtr;
+ MEM_SHARED_DATA *SharedPtr;
+ ECC_OVERRIDE_STRUCT ecc_override_struct;
+ BOOLEAN Flag;
+
+ InitECCOverriedeStruct (NBPtr, &ecc_override_struct);
+ IDS_OPTION_HOOK (IDS_ECC, &ecc_override_struct, &(NBPtr->MemPtr->StdHeader));
+
+ ASSERT (NBPtr != NULL);
+
+ MCTPtr = NBPtr->MCTPtr;
+ Node = MCTPtr->NodeId;
+ SharedPtr = NBPtr->SharedPtr;
+ Flag = TRUE;
+
+ NBPtr->FamilySpecificHook[ScrubberErratum] (NBPtr, (VOID *) &Flag);
+
+ if ((MCTPtr->Status[SbEccDimms]) && (SharedPtr->AllECC)) {
+ // Check if the input dram scrub rate is supported or not
+ ASSERT (ecc_override_struct.CfgScrubDramRate <= 0x16);
+ if (ecc_override_struct.CfgScrubDramRate != 0) {
+ // Program scrub address,
+ // let the scrub Addr be the Base of this Node
+ // Only enable Dram scrubber when there is memory on current node
+ //
+ NBPtr->SetBitField (NBPtr, BFScrubReDirEn, 0);
+ ScrubAddrRJ16 = (NBPtr->GetBitField (NBPtr, BFDramBaseReg0 + Node) & 0xFFFF0000) >> 8;
+ ScrubAddrRJ16 |= NBPtr->GetBitField (NBPtr, BFDramBaseHiReg0 + Node) << 24;
+ NBPtr->SetBitField (NBPtr, BFScrubAddrLoReg, ScrubAddrRJ16 << 16);
+ NBPtr->SetBitField (NBPtr, BFScrubAddrHiReg, ScrubAddrRJ16 >> 16);
+ NBPtr->SetBitField (NBPtr, BFDramScrub, ecc_override_struct.CfgScrubDramRate);
+ NBPtr->IsSupported[ScrubberEn] = TRUE;
+ }
+ }
+ // Scrub CTL for Dcache, L2, L3
+ // Check if the input L2 scrub rate is supported or not
+ ASSERT (ecc_override_struct.CfgScrubL2Rate <= 0x16);
+ NBPtr->SetBitField (NBPtr, BFL2Scrub, ecc_override_struct.CfgScrubL2Rate);
+ // Check if the input Dcache scrub rate is supported or not
+ ASSERT (ecc_override_struct.CfgScrubDcRate <= 0x16);
+ NBPtr->SetBitField (NBPtr, BFDcacheScrub, ecc_override_struct.CfgScrubDcRate);
+ // Do not enable L3 Scrub if F3xE8[L3Capable] is 0 or F3x188[DisableL3] is 1
+ if ((NBPtr->GetBitField (NBPtr, BFL3Capable) == 1) && (NBPtr->GetBitField (NBPtr, BFDisableL3) == 0)) {
+ // Check if input L3 scrub rate is supported or not
+ ASSERT (ecc_override_struct.CfgScrubL3Rate <= 0x16);
+ NBPtr->SetBitField (NBPtr, BFL3Scrub, ecc_override_struct.CfgScrubL3Rate);
+ }
+
+ // Check if Dcache scrubber or L2 scrubber is enabled
+ if ((ecc_override_struct.CfgScrubL2Rate != 0) || (ecc_override_struct.CfgScrubDcRate!= 0)) {
+ // If ClkDivisor is deeper than divide-by-16
+ if (NBPtr->GetBitField (NBPtr, BFC1ClkDivisor) > 4) {
+ // Set it to divide-by-16
+ NBPtr->SetBitField (NBPtr, BFC1ClkDivisor, 4);
+ }
+ }
+
+ NBPtr->SetBitField (NBPtr, BFScrubReDirEn, ecc_override_struct.CfgEccRedirection);
+ NBPtr->SetBitField (NBPtr, BFSyncOnUcEccEn, ecc_override_struct.CfgEccSyncFlood);
+ // Restore MCA reports after scrubber is done
+ // with initializing ECC check bits
+ NBPtr->SetBitField (NBPtr, BFMcaNbCtlReg, NBPtr->McaNbCtlReg);
+
+ Flag = FALSE;
+ NBPtr->FamilySpecificHook[ScrubberErratum] (NBPtr, (VOID *) &Flag);
+
+ return TRUE;
+}
+
+VOID
+STATIC
+InitECCOverriedeStruct (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT ECC_OVERRIDE_STRUCT *pecc_override_struct
+ )
+{
+ //
+ // If (D18F3x44[DramEccEn]==1) THEN 1 ELSE 0 ENDIF
+ //
+ if (NBPtr->GetBitField (NBPtr, BFDramEccEn) == 1) {
+ pecc_override_struct->CfgEccRedirection = 1;
+ } else {
+ pecc_override_struct->CfgEccRedirection = 0;
+ }
+
+ pecc_override_struct->CfgEccSyncFlood = UserOptions.CfgEccSyncFlood;
+ pecc_override_struct->CfgScrubDcRate = UserOptions.CfgScrubDcRate;
+
+ if (UserOptions.CfgScrubDramRate != 0xFF) {
+ pecc_override_struct->CfgScrubDramRate = UserOptions.CfgScrubDramRate;
+ } else {
+ if (NBPtr->MCTPtr->NodeMemSize <= 0x4000) {
+ pecc_override_struct->CfgScrubDramRate = 0x12; // 1 ~ 1 GB
+ } else if (NBPtr->MCTPtr->NodeMemSize <= 0x8000) {
+ pecc_override_struct->CfgScrubDramRate = 0x11; // 1 GB + 1 ~ 2 GB
+ } else if (NBPtr->MCTPtr->NodeMemSize <= 0x10000) {
+ pecc_override_struct->CfgScrubDramRate = 0x10; // 2 GB + 1 ~ 4 GB
+ } else if (NBPtr->MCTPtr->NodeMemSize <= 0x20000) {
+ pecc_override_struct->CfgScrubDramRate = 0x0F; // 4 GB + 1 ~ 8 GB
+ } else if (NBPtr->MCTPtr->NodeMemSize <= 0x40000) {
+ pecc_override_struct->CfgScrubDramRate = 0x0E; // 8 GB + 1 ~ 16 GB
+ } else {
+ pecc_override_struct->CfgScrubDramRate = 0x0D; //16 GB + 1 above
+ }
+ }
+
+ pecc_override_struct->CfgScrubL2Rate = UserOptions.CfgScrubL2Rate;
+ pecc_override_struct->CfgScrubL3Rate = UserOptions.CfgScrubL3Rate;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ECC/mfecc.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ECC/mfecc.h
new file mode 100644
index 0000000..a25b12e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ECC/mfecc.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfecc.h
+ *
+ * Feature ECC initialization functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+#ifndef _MFECC_H_
+#define _MFECC_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFInitECC (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+#endif /* _MFECC_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ECC/mfemp.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ECC/mfemp.c
new file mode 100644
index 0000000..54487d2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ECC/mfemp.c
@@ -0,0 +1,177 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfemp.c
+ *
+ * Feature EMP initialization functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/ECC)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_ECC_MFEMP_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+IsPowerOfTwo (
+ IN UINT32 TestNumber
+ );
+
+BOOLEAN
+MemFInitEMP (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+/*
+ *-----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes EMP (Enhanced Memory Protection)
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - This feature is enabled.
+ * @return FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFInitEMP (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_PARAMETER_STRUCT *RefPtr;
+ DIE_STRUCT *MCTPtr;
+
+ ASSERT (NBPtr != NULL);
+
+ RefPtr = NBPtr->RefPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ if (RefPtr->EnableEccFeature) {
+ if (NBPtr->GetBitField (NBPtr, BFEnhMemProtCap) == 0) {
+ PutEventLog (AGESA_WARNING, MEM_WARNING_EMP_NOT_SUPPORTED, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+ MCTPtr->ErrStatus[EsbEMPNotSupported] = TRUE;
+ } else if (RefPtr->EnableChannelIntlv || RefPtr->EnableBankIntlv || RefPtr->EnableBankSwizzle) {
+ PutEventLog (AGESA_WARNING, MEM_WARNING_EMP_CONFLICT, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+ MCTPtr->ErrStatus[EsbEMPConflict] = TRUE;
+ } else if ((!MCTPtr->GangedMode) &&
+ (!IsPowerOfTwo (MCTPtr->DctData[0].Timings.DctMemSize) &&
+ !IsPowerOfTwo (MCTPtr->DctData[1].Timings.DctMemSize))) {
+ PutEventLog (AGESA_WARNING, MEM_WARNING_EMP_NOT_ENABLED, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+ MCTPtr->ErrStatus[EsbEMPDis] = TRUE;
+ } else {
+ // Reduce memory size to 7/8 of the original memory size
+ ASSERT ((MCTPtr->NodeMemSize % 8) == 0);
+ NBPtr->SetBitField (NBPtr, BFDramHoleValid, 0);
+ MCTPtr->NodeMemSize = (MCTPtr->NodeMemSize / 8) * 7;
+ NBPtr->HtMemMapInit (NBPtr);
+ NBPtr->CpuMemTyping (NBPtr);
+
+ // Enable EMP
+ NBPtr->SetBitField (NBPtr, BFDramEccEn, 1);
+
+ // Scrub CTL settings for Dcache, L2
+ NBPtr->SetBitField (NBPtr, BFL2Scrub, UserOptions.CfgScrubL2Rate);
+ NBPtr->SetBitField (NBPtr, BFDcacheScrub, UserOptions.CfgScrubDcRate);
+
+ NBPtr->SetBitField (NBPtr, BFSyncOnUcEccEn, UserOptions.CfgEccSyncFlood);
+ return TRUE;
+ }
+ }
+ return FALSE;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function checks to see if the input is power of two.
+ *
+ * @param[in] TestNumber - Value to check for power of two
+ *
+ * @return TRUE - is power of two
+ * FALSE - is not power of two
+ */
+BOOLEAN
+STATIC
+IsPowerOfTwo (
+ IN UINT32 TestNumber
+ )
+{
+ return (BOOLEAN) ((TestNumber & (TestNumber - 1)) == 0);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/EXCLUDIMM/mfdimmexclud.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/EXCLUDIMM/mfdimmexclud.c
new file mode 100644
index 0000000..475b04f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/EXCLUDIMM/mfdimmexclud.c
@@ -0,0 +1,206 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfdimmexclud.c
+ *
+ * Feature DIMM exclude.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/EXCLUDIMM)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_EXCLUDIMM_MFDIMMEXCLUD_FILECODE
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemFRASExcludeDIMM (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Check and disable Chip selects that fail training for each node.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - This feature is enabled.
+ * @return FALSE - This feature is not enabled.
+ */
+BOOLEAN
+MemFRASExcludeDIMM (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+ UINT8 ReserveDCT;
+ UINT8 q;
+ BOOLEAN Flag;
+ BOOLEAN IsCSIntlvEnabled;
+ UINT16 CsTestFail;
+ DIE_STRUCT *MCTPtr;
+ BOOLEAN RetVal;
+
+ ASSERT (NBPtr != NULL);
+ ReserveDCT = NBPtr->Dct;
+ CsTestFail = 0;
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.CsTestFail != 0) {
+ // When there is no new failed dimm that needs to be excluded, then no need to go through the process.
+ switch (NBPtr->SharedPtr->DimmExcludeFlag) {
+ case NORMAL:
+ // See there is new dimm that needs to be excluded
+ if ((NBPtr->DCTPtr->Timings.CsTestFail & NBPtr->DCTPtr->Timings.CsEnabled) != 0) {
+ CsTestFail |= NBPtr->DCTPtr->Timings.CsTestFail;
+ }
+ break;
+ case TRAINING:
+ // Do not do any dimm excluding during training
+ // Dimm exclude will be done at the end of training
+ break;
+ case END_TRAINING:
+ // Exclude all dimms that have failures during training
+ if ((NBPtr->DCTPtr->Timings.CsTrainFail != 0) ||
+ ((NBPtr->DCTPtr->Timings.CsTestFail & NBPtr->DCTPtr->Timings.CsEnabled) != 0)) {
+ CsTestFail |= NBPtr->DCTPtr->Timings.CsTestFail;
+ }
+ break;
+ default:
+ IDS_ERROR_TRAP;
+ }
+ }
+ }
+
+ if (CsTestFail != 0) {
+ IsCSIntlvEnabled = FALSE;
+ MCTPtr = NBPtr->MCTPtr;
+ MCTPtr->NodeMemSize = 0;
+ NBPtr->SharedPtr->NodeMap[NBPtr->Node].IsValid = FALSE;
+ NBPtr->SharedPtr->NodeMap[NBPtr->Node].SysBase = 0;
+ NBPtr->SharedPtr->NodeMap[NBPtr->Node].SysLimit = 0;
+ NBPtr->SetBitField (NBPtr, BFDramBaseAddr, 0);
+ NBPtr->SetBitField (NBPtr, BFDramLimitAddr, 0);
+
+ if (MCTPtr->GangedMode) {
+ // if ganged mode, disable all pairs of CS that fail.
+ NBPtr->DCTPtr->Timings.CsTestFail |= CsTestFail;
+ }
+
+ // if chip select interleaving has been enabled, need to undo it before remapping memory
+ if (NBPtr->FeatPtr->UndoInterleaveBanks (NBPtr)) {
+ IsCSIntlvEnabled = TRUE;
+ }
+
+ Flag = TRUE;
+ NBPtr->FamilySpecificHook[BfAfExcludeDimm] (NBPtr, &Flag);
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ if (!MCTPtr->GangedMode || (MCTPtr->Dct == 0)) {
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ NBPtr->DCTPtr->Timings.DctMemSize = 0;
+
+ NBPtr->DCTPtr->Timings.CsEnabled = 0;
+ for (q = 0; q < MAX_CS_PER_CHANNEL; q++) {
+ NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + q, 0);
+ }
+
+ // Set F2x94[DisDramInterface] = 1 if all chip selects fail training on the DCT
+ if ((NBPtr->DCTPtr->Timings.CsPresent & ~NBPtr->DCTPtr->Timings.CsTestFail) == 0) {
+ NBPtr->DisableDCT (NBPtr);
+ }
+
+ Flag = NBPtr->StitchMemory (NBPtr);
+ ASSERT (Flag == TRUE);
+ }
+ }
+ }
+ Flag = FALSE;
+ NBPtr->FamilySpecificHook[BfAfExcludeDimm] (NBPtr, &Flag);
+
+ // Re-enable chip select interleaving when remapping is done.
+ if (IsCSIntlvEnabled) {
+ NBPtr->FeatPtr->InterleaveBanks (NBPtr);
+ }
+
+ RetVal = TRUE;
+ } else {
+ RetVal = FALSE;
+ }
+ NBPtr->SwitchDCT (NBPtr, ReserveDCT);
+ return RetVal;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/IDENDIMM/mfidendimm.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/IDENDIMM/mfidendimm.c
new file mode 100644
index 0000000..6bd8521
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/IDENDIMM/mfidendimm.c
@@ -0,0 +1,548 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfidendimm.c
+ *
+ * Translate physical system address to dimm identification.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat)
+ * @e \$Revision: 84482 $ @e \$Date: 2012-12-16 22:48:10 -0600 (Sun, 16 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "heapManager.h"
+#include "mfidendimm.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_IDENDIMM_MFIDENDIMM_FILECODE
+extern MEM_NB_SUPPORT memNBInstalled[];
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_DCTS_PER_DIE 2 ///< Max DCTs per die
+#define MAX_CHLS_PER_DCT 1 ///< Max Channels per DCT
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+STATIC
+MemFTransSysAddrToCS (
+ IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify,
+ IN MEM_MAIN_DATA_BLOCK *mmPtr
+ );
+
+UINT32
+STATIC
+MemFGetPCI (
+ IN MEM_NB_BLOCK *NBPtr,
+ IN UINT8 NodeID,
+ IN UINT8 DctNum,
+ IN BIT_FIELD_NAME BitFieldName
+ );
+
+UINT8
+STATIC
+MemFUnaryXOR (
+ IN UINT32 address
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------*/
+/**
+*
+* This function identifies the dimm on which the given memory address locates.
+*
+* @param[in, out] *AmdDimmIdentify - Pointer to the parameter structure AMD_IDENTIFY_DIMM
+*
+* @retval AGESA_SUCCESS - Successfully translate physical system address
+* to dimm identification.
+* AGESA_BOUNDS_CHK - Targeted address is out of bound.
+*
+*/
+
+AGESA_STATUS
+AmdIdentifyDimm (
+ IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify
+ )
+{
+ UINT8 i;
+ AGESA_STATUS RetVal;
+ MEM_MAIN_DATA_BLOCK mmData; // Main Data block
+ MEM_NB_BLOCK *NBPtr;
+ MEM_DATA_STRUCT MemData;
+ LOCATE_HEAP_PTR LocHeap;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ UINT8 Node;
+ UINT8 Dct;
+ UINT8 Die;
+ UINT8 DieCount;
+
+ LibAmdMemCopy (&(MemData.StdHeader), &(AmdDimmIdentify->StdHeader), sizeof (AMD_CONFIG_PARAMS), &(AmdDimmIdentify->StdHeader));
+ mmData.MemPtr = &MemData;
+ RetVal = MemSocketScan (&mmData);
+ if (RetVal == AGESA_FATAL) {
+ return RetVal;
+ }
+ DieCount = mmData.DieCount;
+
+ // Search for AMD_MEM_AUTO_HANDLE on the heap first.
+ // Only apply for space on the heap if cannot find AMD_MEM_AUTO_HANDLE on the heap.
+ LocHeap.BufferHandle = AMD_MEM_AUTO_HANDLE;
+ if (HeapLocateBuffer (&LocHeap, &AmdDimmIdentify->StdHeader) == AGESA_SUCCESS) {
+ // NB block has already been constructed by main block.
+ // No need to construct it here.
+ NBPtr = (MEM_NB_BLOCK *)LocHeap.BufferPtr;
+ mmData.NBPtr = NBPtr;
+ } else {
+ AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (MEM_NB_BLOCK)));
+ AllocHeapParams.BufferHandle = AMD_MEM_AUTO_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocHeapParams, &AmdDimmIdentify->StdHeader) != AGESA_SUCCESS) {
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK, 0, 0, 0, 0, &AmdDimmIdentify->StdHeader);
+ ASSERT(FALSE); // Could not allocate heap space for NB block for Identify DIMM
+ return AGESA_FATAL;
+ }
+ NBPtr = (MEM_NB_BLOCK *)AllocHeapParams.BufferPtr;
+ mmData.NBPtr = NBPtr;
+ // Construct each die.
+ for (Die = 0; Die < DieCount; Die ++) {
+ i = 0;
+ while (memNBInstalled[i].MemIdentifyDimmConstruct != 0) {
+ if (memNBInstalled[i].MemIdentifyDimmConstruct (&NBPtr[Die], &MemData, Die)) {
+ break;
+ }
+ i++;
+ };
+ if (memNBInstalled[i].MemIdentifyDimmConstruct == 0) {
+ PutEventLog (AGESA_FATAL, MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM, Die, 0, 0, 0, &AmdDimmIdentify->StdHeader);
+ ASSERT(FALSE); // No Identify DIMM constructor found
+ return AGESA_FATAL;
+ }
+ }
+ }
+
+ if ((RetVal = MemFTransSysAddrToCS (AmdDimmIdentify, &mmData)) == AGESA_SUCCESS) {
+ // Translate Node, DCT and Chip select number to Socket, Channel and Dimm number.
+ Node = AmdDimmIdentify->SocketId;
+ Dct = AmdDimmIdentify->MemChannelId;
+ AmdDimmIdentify->SocketId = MemData.DiesPerSystem[Node].SocketId;
+ AmdDimmIdentify->MemChannelId = NBPtr[Node].GetSocketRelativeChannel (&NBPtr[Node], Dct, 0);
+ AmdDimmIdentify->DimmId /= 2;
+ }
+
+ return RetVal;
+}
+
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------*/
+/**
+*
+* This function translates the given physical system address to
+* a node, channel select, chip select, bank, row, and column address.
+*
+* @param[in, out] *AmdDimmIdentify - Pointer to the parameter structure AMD_IDENTIFY_DIMM
+* @param[in, out] *mmPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+*
+* @retval AGESA_SUCCESS - The chip select address is found
+* @retval AGESA_BOUNDS_CHK - Targeted address is out of bound.
+*
+*/
+AGESA_STATUS
+STATIC
+MemFTransSysAddrToCS (
+ IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify,
+ IN MEM_MAIN_DATA_BLOCK *mmPtr
+ )
+{
+ BOOLEAN CSFound;
+ BOOLEAN DctSelHiRngEn;
+ BOOLEAN DctSelIntLvEn;
+ BOOLEAN DctGangEn;
+ BOOLEAN HiRangeSelected;
+ BOOLEAN DramHoleValid;
+ BOOLEAN CSEn;
+ BOOLEAN SwapDone;
+ BOOLEAN IntLvRgnSwapEn;
+ UINT8 DctSelHi;
+ UINT8 DramEn;
+ UINT8 range;
+ UINT8 IntlvEn;
+ UINT8 IntlvSel;
+ UINT8 ILog;
+ UINT8 DctSelIntLvAddr;
+ UINT8 DctNum;
+ UINT8 cs;
+ UINT8 BadDramCs;
+ UINT8 spare;
+ UINT8 IntLvRgnBaseAddr;
+ UINT8 IntLvRgnLmtAddr;
+ UINT8 IntLvRgnSize;
+ UINT32 temp;
+ UINT32 DramHoleOffset;
+ UINT32 DramHoleBase;
+ UINT64 DramBase;
+ UINT64 DramLimit;
+ UINT64 DramLimitSysAddr;
+ UINT64 DctSelBaseAddr;
+ UINT64 DctSelBaseOffset;
+ UINT64 ChannelAddr;
+ UINT64 CSBase;
+ UINT64 CSMask;
+ UINT64 InputAddr;
+ UINT64 ChannelOffset;
+ MEM_NB_BLOCK *NBPtr;
+ UINT8 Die;
+
+ UINT64 SysAddr;
+ UINT8 *NodeID;
+ UINT8 *ChannelSelect;
+ UINT8 *ChipSelect;
+
+ SysAddr = AmdDimmIdentify->MemoryAddress;
+ NodeID = &(AmdDimmIdentify->SocketId);
+ ChannelSelect = &(AmdDimmIdentify->MemChannelId);
+ ChipSelect = &(AmdDimmIdentify->DimmId);
+ CSFound = FALSE;
+ ILog = 0;
+ NBPtr = mmPtr->NBPtr;
+
+ NBPtr->FamilySpecificHook[FixupSysAddr] (NBPtr, &SysAddr);
+
+ // Loop to determine the dram range
+ for (Die = 0; Die < mmPtr->DieCount; Die ++) {
+ range = NBPtr[Die].Node;
+
+ // DRAM Base
+ temp = MemFGetPCI (NBPtr, 0, 0, BFDramBaseReg0 + range);
+ DramEn = (UINT8) (temp & 0x3);
+ IntlvEn = (UINT8) ((temp >> 8) & 0x7);
+
+ DramBase = ((UINT64) (MemFGetPCI (NBPtr, 0, 0, BFDramBaseHiReg0 + range) & 0xFF) << 40) |
+ (((UINT64) temp & 0xFFFF0000) << 8);
+
+ // DRAM Limit
+ temp = MemFGetPCI (NBPtr, 0, 0, BFDramLimitReg0 + range);
+ *NodeID = (UINT8) (temp & 0x7);
+ IntlvSel = (UINT8) ((temp >> 8) & 0x7);
+ DramLimit = ((UINT64) (MemFGetPCI (NBPtr, 0, 0, BFDramLimitHiReg0 + range) & 0xFF) << 40) |
+ (((UINT64) temp << 8) | 0xFFFFFF);
+ DramLimitSysAddr = (((UINT64) MemFGetPCI (NBPtr, *NodeID, 0, BFDramLimitAddr)) << 27) | 0x7FFFFFF;
+ ASSERT (DramLimit <= DramLimitSysAddr);
+
+ if ((DramEn != 0) && (DramBase <= SysAddr) && (SysAddr <= DramLimitSysAddr) &&
+ ((IntlvEn == 0) || (IntlvSel == ((SysAddr >> 12) & IntlvEn)))) {
+ // Determine the number of bit positions consumed by Node Interleaving
+ switch (IntlvEn) {
+
+ case 0x0:
+ ILog = 0;
+ break;
+
+ case 0x1:
+ ILog = 1;
+ break;
+
+ case 0x3:
+ ILog = 2;
+ break;
+
+ case 0x7:
+ ILog = 3;
+ break;
+
+ default:
+ IDS_ERROR_TRAP;
+ }
+
+ DramHoleOffset = MemFGetPCI (NBPtr, *NodeID, 0, BFDramHoleOffset) << 23;
+ DramHoleValid = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, (mmPtr->DieCount == 1) ? BFDramMemHoistValid : BFDramHoleValid);
+ DramHoleBase = MemFGetPCI (NBPtr, *NodeID, 0, BFDramHoleBase) << 24;
+ // Address belongs to this node based on DramBase/Limit,
+ // but is in the memory hole so it doesn't map to DRAM
+ if (DramHoleValid && (DramHoleBase <= SysAddr) && (SysAddr < 0x100000000)) {
+ return AGESA_BOUNDS_CHK;
+ }
+
+ // F2x10C Swapped Interleaved Region
+ IntLvRgnSwapEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnSwapEn);
+ if (IntLvRgnSwapEn) {
+ IntLvRgnBaseAddr = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnBaseAddr);
+ IntLvRgnLmtAddr = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnLmtAddr);
+ IntLvRgnSize = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnSize);
+ ASSERT (IntLvRgnSize == (IntLvRgnLmtAddr - IntLvRgnBaseAddr + 1));
+ if (((SysAddr >> 34) == 0) &&
+ ((((SysAddr >> 27) >= IntLvRgnBaseAddr) && ((SysAddr >> 27) <= IntLvRgnLmtAddr))
+ || ((SysAddr >> 27) < IntLvRgnSize))) {
+ SysAddr ^= (UINT64) IntLvRgnBaseAddr << 27;
+ }
+ }
+
+ // Extract variables from F2x110 DRAM Controller Select Low Register
+ DctSelHiRngEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelHiRngEn);
+ DctSelHi = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelHi);
+ DctSelIntLvEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelIntLvEn);
+ DctGangEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDctGangEn);
+ DctSelIntLvAddr = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelIntLvAddr);
+ DctSelBaseAddr = (UINT64) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelBaseAddr) << 27;
+ DctSelBaseOffset = (UINT64) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelBaseOffset) << 26;
+
+
+ // Determine if high DCT address range is being selected
+ if (DctSelHiRngEn && !DctGangEn && (SysAddr >= DctSelBaseAddr)) {
+ HiRangeSelected = TRUE;
+ } else {
+ HiRangeSelected = FALSE;
+ }
+
+ // Determine Channel
+ if (DctGangEn) {
+ *ChannelSelect = (UINT8) ((SysAddr >> 3) & 0x1);
+ } else if (HiRangeSelected) {
+ *ChannelSelect = DctSelHi;
+ } else if (DctSelIntLvEn && (DctSelIntLvAddr == 0)) {
+ *ChannelSelect = (UINT8) ((SysAddr >> 6) & 0x1);
+ } else if (DctSelIntLvEn && (((DctSelIntLvAddr >> 1) & 0x1) != 0)) {
+ temp = MemFUnaryXOR ((UINT32) ((SysAddr >> 16) & 0x1F));
+ if ((DctSelIntLvAddr & 0x1) != 0) {
+ *ChannelSelect = (UINT8) (((SysAddr >> 9) & 0x1) ^ temp);
+ } else {
+ *ChannelSelect = (UINT8) (((SysAddr >> 6) & 0x1) ^ temp);
+ }
+ } else if (DctSelIntLvEn) {
+ *ChannelSelect = (UINT8) ((SysAddr >> (12 + ILog)) & 0x1);
+ } else if (DctSelHiRngEn) {
+ *ChannelSelect = ~DctSelHi & 0x1;
+ } else {
+ *ChannelSelect = 0;
+ }
+ ASSERT (*ChannelSelect < NBPtr[*NodeID].DctCount);
+
+ // Determine base address offset
+ if (HiRangeSelected) {
+ if ((DctSelBaseAddr < DramHoleBase) && DramHoleValid && (SysAddr >= (UINT64) 0x100000000)) {
+ ChannelOffset = (UINT64) DramHoleOffset;
+ } else {
+ ChannelOffset = DctSelBaseOffset;
+ }
+ } else {
+ if (DramHoleValid && (SysAddr >= (UINT64) 0x100000000)) {
+ ChannelOffset = (UINT64) DramHoleOffset;
+ } else {
+ ChannelOffset = DramBase;
+ }
+ }
+
+ // Remove hoisting offset and normalize to DRAM bus addresses
+ ChannelAddr = SysAddr - ChannelOffset;
+
+ // Remove node interleaving
+ if (IntlvEn != 0) {
+ ChannelAddr = ((ChannelAddr >> (12 + ILog)) << 12) | (ChannelAddr & 0xFFF);
+ }
+
+ // Remove channel interleave
+ if (DctSelIntLvEn && !HiRangeSelected && !DctGangEn) {
+ if ((DctSelIntLvAddr & 1) != 1) {
+ // A[6] Select or Hash 6
+ ChannelAddr = ((ChannelAddr >> 7) << 6) | (ChannelAddr & 0x3F);
+ } else if (DctSelIntLvAddr == 1) {
+ // A[12]
+ ChannelAddr = ((ChannelAddr >> 13) << 12) | (ChannelAddr & 0xFFF);
+ } else {
+ // Hash 9
+ ChannelAddr = ((ChannelAddr >> 10) << 9) | (ChannelAddr & 0x1FF);
+ }
+ }
+
+ // Determine the Chip Select
+ for (cs = 0; cs < MAX_CS_PER_CHANNEL; ++ cs) {
+ DctNum = DctGangEn ? 0 : *ChannelSelect;
+
+ // Obtain the CS Base
+ temp = MemFGetPCI (NBPtr, *NodeID, DctNum, BFCSBaseAddr0Reg + cs);
+ CSEn = (BOOLEAN) (temp & 0x1);
+ CSBase = ((UINT64) temp & NBPtr->CsRegMsk) << 8;
+
+ // Obtain the CS Mask
+ CSMask = ((UINT64) MemFGetPCI (NBPtr, *NodeID, DctNum, BFCSMask0Reg + (cs >> 1)) & NBPtr->CsRegMsk) << 8;
+
+ // Adjust the Channel Addr for easy comparison
+ InputAddr = ((ChannelAddr >> 8) & NBPtr->CsRegMsk) << 8;
+
+ if (CSEn && ((InputAddr & ~CSMask) == (CSBase & ~CSMask))) {
+ CSFound = TRUE;
+
+ *ChipSelect = cs;
+
+ temp = MemFGetPCI (NBPtr, *NodeID, 0, BFOnLineSpareControl);
+ SwapDone = (BOOLEAN) ((temp >> (1 + 2 * (*ChannelSelect))) & 0x1);
+ BadDramCs = (UINT8) ((temp >> (4 + 4 * (*ChannelSelect))) & 0x7);
+ if (SwapDone && (cs == BadDramCs)) {
+ // Find the spare rank for the channel
+ for (spare = 0; spare < MAX_CS_PER_CHANNEL; ++spare) {
+ if ((MemFGetPCI (NBPtr, *NodeID, DctNum, BFCSBaseAddr0Reg + spare) & 0x2) != 0) {
+ *ChipSelect = spare;
+ break;
+ }
+ }
+ }
+ ASSERT (*ChipSelect < MAX_CS_PER_CHANNEL);
+
+ break;
+ }
+ }
+ }
+ if (CSFound) {
+ break;
+ }
+ }
+
+ // last ditch sanity check
+ ASSERT (!CSFound || ((*NodeID < mmPtr->DieCount) && (*ChannelSelect < NBPtr[*NodeID].DctCount) && (*ChipSelect < MAX_CS_PER_CHANNEL)));
+ if (CSFound) {
+ return AGESA_SUCCESS;
+ } else {
+ return AGESA_BOUNDS_CHK;
+ }
+
+}
+
+
+/*-----------------------------------------------------------------------------*/
+/**
+*
+* This function is the interface to call the PCI register access function
+* defined in NB block.
+*
+* @param[in] *NBPtr - Pointer to the parameter structure MEM_NB_BLOCK
+* @param[in] NodeID - Node ID number of the target Northbridge
+* @param[in] DctNum - DCT number if applicable, otherwise, put 0
+* @param[in] BitFieldName - targeted bitfield
+*
+* @retval UINT32 - 32 bits PCI register value
+*
+*/
+UINT32
+STATIC
+MemFGetPCI (
+ IN MEM_NB_BLOCK *NBPtr,
+ IN UINT8 NodeID,
+ IN UINT8 DctNum,
+ IN BIT_FIELD_NAME BitFieldName
+ )
+{
+ MEM_NB_BLOCK *LocalNBPtr;
+ UINT8 Die;
+
+ // Find NBBlock that associates with node NodeID
+ for (Die = 0; (Die < MAX_NODES_SUPPORTED) && (NBPtr[Die].Node != NodeID); Die ++);
+ ASSERT (Die < MAX_NODES_SUPPORTED);
+
+ // Get the northbridge pointer for the targeted node.
+ LocalNBPtr = &NBPtr[Die];
+ LocalNBPtr->FamilySpecificHook[DCTSelectSwitch] (LocalNBPtr, &DctNum);
+ LocalNBPtr->Dct = DctNum;
+ // The caller of this function will take care of the ganged/unganged situation.
+ // So Ganged is set to be false here, and do PCI read on the DCT specified by DctNum.
+ return LocalNBPtr->GetBitField (LocalNBPtr, BitFieldName);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+*
+* This function returns an even parity bit (making the total # of 1's even)
+* {0, 1} = number of set bits in argument is {even, odd}.
+*
+* @param[in] address - the address on which the parity bit will be calculated
+*
+* @retval UINT8 - parity bit
+*
+*/
+
+UINT8
+STATIC
+MemFUnaryXOR (
+ IN UINT32 address
+ )
+{
+ UINT8 parity;
+ UINT8 index;
+ parity = 0;
+ for (index = 0; index < 32; ++ index) {
+ parity = (UINT8) (parity ^ (address & 0x1));
+ address = address >> 1;
+ }
+ return parity;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/IDENDIMM/mfidendimm.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/IDENDIMM/mfidendimm.h
new file mode 100644
index 0000000..bf95ce0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/IDENDIMM/mfidendimm.h
@@ -0,0 +1,72 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfidendimm.h
+ *
+ * Header file for address to dimm identification translator.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _MFIDENDIMM_H_
+#define _MFIDENDIMM_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif //_MFIDENDIMM_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/LVDDR3/mflvddr3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/LVDDR3/mflvddr3.c
new file mode 100644
index 0000000..9407f45
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/LVDDR3/mflvddr3.c
@@ -0,0 +1,172 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * lvddr3.c
+ *
+ * Voltage change for DDR3 DIMMs.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/LVDDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_LVDDR3_MFLVDDR3_FILECODE
+/* features */
+#include "mflvddr3.h"
+
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ * This function calculate the common lowest voltage supported by all DDR3
+ * DIMMs in the system. This function only needs to be called on BSP.
+ *
+ * @param[in, out] *NBPtr - Pointer to NB block
+ *
+ * @return TRUE - This feature is enabled.
+ * @return FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFLvDdr3 (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ CH_DEF_STRUCT *ChannelPtr;
+ MEM_TECH_BLOCK *TechPtr;
+ MEM_SHARED_DATA *mmSharedPtr;
+ UINT8 Dct;
+ UINT8 Channel;
+ UINT8 Dimm;
+ UINT8 *SpdBufferPtr;
+ UINT8 VDDByte;
+ UINT8 VoltageMap;
+
+ mmSharedPtr = NBPtr->SharedPtr;
+ TechPtr = NBPtr->TechPtr;
+ VoltageMap = 0xFF;
+
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+ NBPtr->SwitchChannel (NBPtr, Channel);
+ ChannelPtr = NBPtr->ChannelPtr;
+ for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+ if (TechPtr->GetDimmSpdBuffer (TechPtr, &SpdBufferPtr, Dimm)) {
+ // SPD byte 6: Module Nominal Voltage, VDD
+ // 1.5v - bit 0
+ // 1.35v - bit 1
+ // 1.2v - bit 2
+ VDDByte = SpdBufferPtr[MNVVDD];
+ IDS_HDT_CONSOLE (MEM_FLOW, "Node%d DCT%d Channel%d Dimm%d VDD Byte: 0x%02x\n", NBPtr->Node, Dct, Channel, Dimm, VDDByte);
+
+ // Reverse the 1.5V operable bit. So its encoding can be consistent
+ // with that of 1.35V and 1.25V operable bit.
+ VDDByte ^= 1;
+ ASSERT (VDDByte != 0);
+
+ if (mmSharedPtr->VoltageMap != 0) {
+ // Get the common supported voltage map
+ VoltageMap &= VDDByte;
+ } else {
+ // This is the second execution of all the loop as no common voltage is found
+ if (VDDByte == (1 << VOLT1_5_ENCODED_VAL)) {
+ // Always exclude 1.5V dimm if no common voltage is found
+ ChannelPtr->DimmExclude |= (UINT16) 1 << Dimm;
+ }
+ }
+ }
+ }
+ if (mmSharedPtr->VoltageMap == 0) {
+ NBPtr->DCTPtr->Timings.DimmExclude |= ChannelPtr->DimmExclude;
+ }
+ }
+ }
+
+ if (mmSharedPtr->VoltageMap != 0) {
+ mmSharedPtr->VoltageMap &= VoltageMap;
+ }
+
+ return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/LVDDR3/mflvddr3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/LVDDR3/mflvddr3.h
new file mode 100644
index 0000000..93bc4f4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/LVDDR3/mflvddr3.h
@@ -0,0 +1,78 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mflvddr3.h
+ *
+ * Header file for DDR3 DIMMs voltage configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _MFLVDDR3_H_
+#define _MFLVDDR3_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define MNVVDD 6
+#define LOWEST_VOLT_BIT 2
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemFLvDdr3 (
+ IN OUT MEM_NB_BLOCK *NBPtr
+);
+
+#endif //_MFLVDDR3_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/MEMCLR/mfmemclr.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/MEMCLR/mfmemclr.c
new file mode 100644
index 0000000..5a0c675
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/MEMCLR/mfmemclr.c
@@ -0,0 +1,153 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfmemclr.c
+ *
+ * Feature function for memory clear operation
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/Memclr)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "mfmemclr.h"
+#include "Ids.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_MEMCLR_MFMEMCLR_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*
+ *-----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * Initiates memory clear operation on one node with Dram on it.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+MemFMctMemClr_Init (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ AGESA_TESTPOINT (TpProcMemMemClr, &NBPtr->MemPtr->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_BEGINMEMFMCTMEMCLR_INIT, &(NBPtr->MemPtr->StdHeader));
+ if (NBPtr->RefPtr->EnableMemClr == TRUE) {
+ if (NBPtr->MCTPtr->NodeMemSize != 0) {
+ if (!NBPtr->MemCleared) {
+ NBPtr->PollBitField (NBPtr, BFMemClrBusy, 0, SPECIAL_PCI_ACCESS_TIMEOUT, FALSE);
+ if (NBPtr->GetBitField (NBPtr, BFDramEnabled) == 1) {
+ NBPtr->FamilySpecificHook[BeforeMemClr] (NBPtr, NBPtr);
+ NBPtr->SetBitField (NBPtr, BFDramBaseAddr, 0);
+ NBPtr->SetBitField (NBPtr, BFMemClrInit, 1);
+ }
+ }
+ }
+ }
+ IDS_PERF_TIMESTAMP (TP_ENDNMEMFMCTMEMCLR_INIT, &(NBPtr->MemPtr->StdHeader));
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * Ensures memory clear operation has completed on one node with Dram on it.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+MemFMctMemClr_Sync (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT32 MicroSecondToWait;
+
+ MicroSecondToWait = 0;
+ if (NBPtr->RefPtr->EnableMemClr == TRUE) {
+ if (NBPtr->MCTPtr->NodeMemSize != 0) {
+ // Calculate Timeout value:
+ // Timeout (in microsecond) = Memory Size * 1.5 ns / 8 Byte * 4 (Margin) * 1000 (change millisecond to us)
+ // NodeMemSize is system address right shifted by 16, so shift it 4 bits to right to convert it to MB.
+ // 1.5 / 8 * 4 * 1000 = 750
+ MicroSecondToWait = (NBPtr->MCTPtr->NodeMemSize >> 4) * 750;
+
+ if (!NBPtr->MemCleared) {
+ NBPtr->PollBitField (NBPtr, BFMemClrBusy, 0, MicroSecondToWait, FALSE);
+ NBPtr->PollBitField (NBPtr, BFMemCleared, 1, MicroSecondToWait, FALSE);
+ NBPtr->SetBitField (NBPtr, BFDramBaseAddr, NBPtr->MCTPtr->NodeSysBase >> (27 - 16));
+ NBPtr->MemCleared = TRUE;
+ }
+ }
+ }
+ return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ODTHERMAL/mfodthermal.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ODTHERMAL/mfodthermal.c
new file mode 100644
index 0000000..41a14ae
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ODTHERMAL/mfodthermal.c
@@ -0,0 +1,179 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfodthermal.c
+ *
+ * On Dimm thermal management.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Ids.h"
+#include "mfodthermal.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_ODTHERMAL_MFODTHERMAL_FILECODE
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ * This function does On-Dimm thermal management.
+ *
+ * @param[in, out] *NBPtr - Pointer to the MEM_NB_BLOCK.
+ *
+ * @return TRUE - This feature is enabled.
+ * @return FALSE - This feature is not enabled.
+ */
+
+BOOLEAN
+MemFOnDimmThermal (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 i;
+ UINT8 Dct;
+ CH_DEF_STRUCT *ChannelPtr;
+ MEM_DATA_STRUCT *MemPtr;
+ UINT8 *SpdBufferPtr;
+ UINT8 ThermalOp;
+ BOOLEAN ODTSEn;
+ BOOLEAN ExtendTmp;
+ BOOLEAN FirstLoop;
+
+ ODTSEn = FALSE;
+ ExtendTmp = FALSE;
+ FirstLoop = TRUE;
+
+ ASSERT (NBPtr != NULL);
+ MemPtr = NBPtr->MemPtr;
+ AGESA_TESTPOINT (TpProcMemOnDimmThermal, &MemPtr->StdHeader);
+ if (NBPtr->MCTPtr->NodeMemSize != 0) {
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ // Only go through the DCT if it is not disabled.
+ if (NBPtr->GetBitField (NBPtr, BFDisDramInterface) == 0) {
+ ChannelPtr = NBPtr->ChannelPtr;
+ // If Ganged mode is enabled, need to go through all dram devices on both DCTs.
+ if (!NBPtr->Ganged || (NBPtr->Dct != 1)) {
+ if (!(NBPtr->IsSupported[CheckSetSameDctODTsEn]) || (NBPtr->IsSupported[CheckSetSameDctODTsEn] && (NBPtr->Dct != 1)) ||
+ ((NBPtr->Dct != 0) && (FirstLoop == TRUE))) {
+ ODTSEn = TRUE;
+ ExtendTmp = TRUE;
+ }
+ }
+ for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i ++) {
+ if (NBPtr->TechPtr->GetDimmSpdBuffer (NBPtr->TechPtr, &SpdBufferPtr, i)) {
+ // Check byte 31: thermal and refresh option.
+ ThermalOp = SpdBufferPtr[THERMAL_OPT];
+ // Bit 3: ODTS readout
+ if (!((ThermalOp >> 3) & 1)) {
+ ODTSEn = FALSE;
+ }
+ // Bit 0: Extended Temperature Range.
+ if (!(ThermalOp & 1)) {
+ ExtendTmp = FALSE;
+ }
+ }
+ }
+
+ if (!NBPtr->Ganged || (NBPtr->Dct == 1)) {
+ // If in ganged mode, need to switch back to DCT0 to set the registers.
+ if (NBPtr->Ganged || NBPtr->IsSupported[CheckSetSameDctODTsEn]) {
+ NBPtr->SwitchDCT (NBPtr, 0);
+ ChannelPtr = NBPtr->ChannelPtr;
+ }
+ // If all dram devices on support ODTS
+ NBPtr->SetBitField (NBPtr, BFODTSEn, (ODTSEn == TRUE) ? 1 : 0);
+ ChannelPtr->ExtendTmp = ExtendTmp;
+ }
+ FirstLoop = FALSE;
+ } else {
+ ODTSEn = FALSE;
+ ExtendTmp = FALSE;
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tDct %d\n", Dct);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tODTSEn = %d\n", ODTSEn);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tExtendTmp = %d\n", ExtendTmp);
+ }
+ }
+ return TRUE;
+}
+
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ODTHERMAL/mfodthermal.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ODTHERMAL/mfodthermal.h
new file mode 100644
index 0000000..50945f3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/ODTHERMAL/mfodthermal.h
@@ -0,0 +1,77 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfodthermal.h
+ *
+ * Header file for On-Dimm thermal management.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _MFODTHERMAL_H_
+#define _MFODTHERMAL_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFOnDimmThermal (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+#endif //_MFODTHERMAL_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/PARTRN/mfParallelTraining.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/PARTRN/mfParallelTraining.c
new file mode 100644
index 0000000..2fd10c5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/PARTRN/mfParallelTraining.c
@@ -0,0 +1,288 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfParallelTraining.c
+ *
+ * This is the parallel training feature
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/PARTRN)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuApicUtilities.h"
+#include "mfParallelTraining.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_PARTRN_MFPARALLELTRAINING_FILECODE
+
+/*-----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+extern MEM_TECH_CONSTRUCTOR* memTechInstalled[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This is the main function to perform parallel training on all nodes.
+ * This is the routine which will run on the remote AP.
+ *
+ * @param[in,out] *EnvPtr - Pointer to the Training Environment Data
+ * @param[in,out] *StdHeader - Pointer to the Standard Header of the AP
+ *
+ * @return TRUE - This feature is enabled.
+ * @return FALSE - This feature is not enabled.
+ */
+BOOLEAN
+MemFParallelTraining (
+ IN OUT REMOTE_TRAINING_ENV *EnvPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ MEM_PARAMETER_STRUCT ParameterList;
+ MEM_NB_BLOCK NB;
+ MEM_TECH_BLOCK TB;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ MEM_DATA_STRUCT *MemPtr;
+ DIE_STRUCT *MCTPtr;
+ UINT8 p;
+ UINT8 i;
+ UINT8 Dct;
+ UINT8 Channel;
+ UINT8 *BufferPtr;
+ UINT8 DctCount;
+ UINT8 ChannelCount;
+ UINT8 RowCount;
+ UINT8 ColumnCount;
+ UINT16 SizeOfNewBuffer;
+ AP_DATA_TRANSFER ReturnData;
+
+ //
+ // Initialize Parameters
+ //
+ ReturnData.DataPtr = NULL;
+ ReturnData.DataSizeInDwords = 0;
+ ReturnData.DataTransferFlags = 0;
+
+ ASSERT (EnvPtr != NULL);
+ //
+ // Replace Standard header of a AP
+ //
+ LibAmdMemCopy (StdHeader, &(EnvPtr->StdHeader), sizeof (AMD_CONFIG_PARAMS), &(EnvPtr->StdHeader));
+
+
+ //
+ // Allocate buffer for training data
+ //
+ BufferPtr = (UINT8 *) (&EnvPtr->DieStruct);
+ DctCount = EnvPtr->DieStruct.DctCount;
+ BufferPtr += sizeof (DIE_STRUCT);
+ ChannelCount = ((DCT_STRUCT *) BufferPtr)->ChannelCount;
+ BufferPtr += DctCount * sizeof (DCT_STRUCT);
+ RowCount = ((CH_DEF_STRUCT *) BufferPtr)->RowCount;
+ ColumnCount = ((CH_DEF_STRUCT *) BufferPtr)->ColumnCount;
+
+ SizeOfNewBuffer = sizeof (DIE_STRUCT) +
+ DctCount * (
+ sizeof (DCT_STRUCT) + (
+ ChannelCount * (
+ sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK) + (
+ RowCount * ColumnCount * NUMBER_OF_DELAY_TABLES +
+ (MAX_BYTELANES_PER_CHANNEL * MAX_CS_PER_CHANNEL * NUMBER_OF_FAILURE_MASK_TABLES) +
+ (MAX_DIMMS_PER_CHANNEL * MAX_NUMBER_LANES)
+ )
+ )
+ )
+ );
+ AllocHeapParams.RequestedBufferSize = SizeOfNewBuffer;
+ AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, 0, 0, 0);
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+ BufferPtr = AllocHeapParams.BufferPtr;
+ LibAmdMemCopy ( BufferPtr,
+ &(EnvPtr->DieStruct),
+ sizeof (DIE_STRUCT) + DctCount * (sizeof (DCT_STRUCT) + ChannelCount * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK))),
+ StdHeader
+ );
+
+ //
+ // Fix up pointers
+ //
+ MCTPtr = (DIE_STRUCT *) BufferPtr;
+ BufferPtr += sizeof (DIE_STRUCT);
+ MCTPtr->DctData = (DCT_STRUCT *) BufferPtr;
+ BufferPtr += MCTPtr->DctCount * sizeof (DCT_STRUCT);
+ for (Dct = 0; Dct < MCTPtr->DctCount; Dct++) {
+ MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) BufferPtr;
+ BufferPtr += MCTPtr->DctData[Dct].ChannelCount * sizeof (CH_DEF_STRUCT);
+ for (Channel = 0; Channel < MCTPtr->DctData[Dct].ChannelCount; Channel++) {
+ MCTPtr->DctData[Dct].ChData[Channel].MCTPtr = MCTPtr;
+ MCTPtr->DctData[Dct].ChData[Channel].DCTPtr = &MCTPtr->DctData[Dct];
+ }
+ }
+ NB.PSBlock = (MEM_PS_BLOCK *) BufferPtr;
+ BufferPtr += DctCount * ChannelCount * sizeof (MEM_PS_BLOCK);
+
+ ReturnData.DataPtr = AllocHeapParams.BufferPtr;
+ ReturnData.DataSizeInDwords = (SizeOfNewBuffer + 3) / 4;
+ ReturnData.DataTransferFlags = 0;
+
+ //
+ // Allocate Memory for the MEM_DATA_STRUCT we will use
+ //
+ AllocHeapParams.RequestedBufferSize = sizeof (MEM_DATA_STRUCT);
+ AllocHeapParams.BufferHandle = AMD_MEM_DATA_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+ MemPtr = (MEM_DATA_STRUCT *)AllocHeapParams.BufferPtr;
+
+ LibAmdMemCopy (&(MemPtr->StdHeader), &(EnvPtr->StdHeader), sizeof (AMD_CONFIG_PARAMS), StdHeader);
+
+ //
+ // Copy Parameters from environment
+ //
+ ParameterList.HoleBase = EnvPtr->HoleBase;
+ ParameterList.BottomIo = EnvPtr->BottomIo;
+ ParameterList.UmaSize = EnvPtr->UmaSize;
+ ParameterList.SysLimit = EnvPtr->SysLimit;
+ ParameterList.TableBasedAlterations = EnvPtr->TableBasedAlterations;
+ ParameterList.PlatformMemoryConfiguration = EnvPtr->PlatformMemoryConfiguration;
+ MemPtr->ParameterListPtr = &ParameterList;
+
+ for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+ MemPtr->GetPlatformCfg[p] = EnvPtr->GetPlatformCfg[p];
+ }
+
+ MemPtr->ErrorHandling = EnvPtr->ErrorHandling;
+ //
+ // Create Local NBBlock and Tech Block
+ //
+ EnvPtr->NBBlockCtor (&NB, MCTPtr, EnvPtr->FeatPtr);
+ NB.RefPtr = &ParameterList;
+ NB.MemPtr = MemPtr;
+ i = 0;
+ while (memTechInstalled[i] != NULL) {
+ if (memTechInstalled[i] (&TB, &NB)) {
+ break;
+ }
+ i++;
+ }
+ NB.TechPtr = &TB;
+ NB.TechBlockSwitch (&NB);
+
+ //
+ // Setup CPU Mem Type MSRs on the AP
+ //
+ NB.CpuMemTyping (&NB);
+
+ IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", NB.Node);
+ //
+ // Call Technology Specific Training routine
+ //
+ NB.TrainingFlow (&NB);
+ //
+ // Copy training data to ReturnData buffer
+ //
+ LibAmdMemCopy ( BufferPtr,
+ MCTPtr->DctData[0].ChData[0].RcvEnDlys,
+ ((DctCount * ChannelCount) * (
+ (RowCount * ColumnCount * NUMBER_OF_DELAY_TABLES) +
+ (MAX_BYTELANES_PER_CHANNEL * MAX_CS_PER_CHANNEL * NUMBER_OF_FAILURE_MASK_TABLES) +
+ (MAX_DIMMS_PER_CHANNEL * MAX_NUMBER_LANES)
+ )
+ ),
+ StdHeader);
+
+ HeapDeallocateBuffer (AMD_MEM_DATA_HANDLE, StdHeader);
+ //
+ // Restore pointers
+ //
+ for (Dct = 0; Dct < MCTPtr->DctCount; Dct++) {
+ for (Channel = 0; Channel < MCTPtr->DctData[Dct].ChannelCount; Channel++) {
+ MCTPtr->DctData[Dct].ChData[Channel].MCTPtr = &EnvPtr->DieStruct;
+ MCTPtr->DctData[Dct].ChData[Channel].DCTPtr = &EnvPtr->DieStruct.DctData[Dct];
+
+ MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RcvEnDlys;
+ MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].WrDqsDlys;
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqsDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqsDlys;
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqsDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqsDlys;
+ MCTPtr->DctData[Dct].ChData[Channel].WrDatDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].WrDatDlys;
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqs2dDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqs2dDlys;
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqsMinDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqsMinDlys;
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqsMaxDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].RdDqsMaxDlys;
+ MCTPtr->DctData[Dct].ChData[Channel].WrDatMinDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].WrDatMinDlys;
+ MCTPtr->DctData[Dct].ChData[Channel].WrDatMaxDlys = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].WrDatMaxDlys;
+ MCTPtr->DctData[Dct].ChData[Channel].FailingBitMask = EnvPtr->DieStruct.DctData[Dct].ChData[Channel].FailingBitMask;
+ }
+ MCTPtr->DctData[Dct].ChData = EnvPtr->DieStruct.DctData[Dct].ChData;
+ }
+ MCTPtr->DctData = EnvPtr->DieStruct.DctData;
+ }
+
+ //
+ // Signal to BSP that training is complete and Send Results
+ //
+ ASSERT (ReturnData.DataPtr != NULL);
+ ApUtilTransmitBuffer (EnvPtr->BspSocket, EnvPtr->BspCore, &ReturnData, StdHeader);
+
+ //
+ // Clean up and exit.
+ //
+ HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, 0, 0, 0), StdHeader);
+ } else {
+ MCTPtr = &EnvPtr->DieStruct;
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA, MCTPtr->NodeId, 0, 0, 0, StdHeader);
+ SetMemError (AGESA_FATAL, MCTPtr);
+ ASSERT(FALSE); // Could not allocate heap for buffer for parallel training data
+ }
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/PARTRN/mfStandardTraining.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/PARTRN/mfStandardTraining.c
new file mode 100644
index 0000000..654af0e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/PARTRN/mfStandardTraining.c
@@ -0,0 +1,85 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfStandardTraining.c
+ *
+ * This is the standard training routine which performs all training from the BSP
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/PARTRN)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "mfStandardTraining.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_FEAT_PARTRN_MFSTANDARDTRAINING_FILECODE
+/*-----------------------------------------------------------------------------
+* EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This is the main function to perform memory training on all nodes from
+ * the BSP only.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - This feature is enabled.
+ * @return FALSE - This feature is not enabled.
+ */
+BOOLEAN
+MemFStandardTraining (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ ASSERT (NBPtr != NULL);
+
+ NBPtr->TrainingFlow (NBPtr);
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/KB/mfRdWr2DKb.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/KB/mfRdWr2DKb.c
new file mode 100644
index 0000000..b355d6b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/KB/mfRdWr2DKb.c
@@ -0,0 +1,348 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfRdWr2DKb.c
+ *
+ * KB - Specific funtion for 2D Read and write training feature
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/RdWr2DTraining/Kb)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "AdvancedApi.h"
+#include "GeneralServices.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mport.h"
+#include "merrhdl.h"
+#include "OptionMemory.h"
+#include "mfRdWr2DTraining.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_FEAT_RDWR2DTRAINING_KB_MFRDWR2DKB_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFRdWr2DTrainingInitKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+STATIC
+MemFRdWr2DProgramVrefKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *VrefPtr
+ );
+
+BOOLEAN
+STATIC
+MemFRdWr2DScaleVrefKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Vref
+ );
+
+BOOLEAN
+STATIC
+MemFRdWr2DProgramIntExtVrefSelectKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+STATIC
+MemFRdWr2DProgramDataPatternKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID* PatternIndexPtr
+ );
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initializes the 2D Read/Write Training Feature Hooks for KB
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return BOOLEAN
+ * TRUE - Function was implemented
+ *
+ */
+
+BOOLEAN
+MemFRdWr2DTrainingInitKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ ASSERT (NBPtr != NULL);
+ NBPtr->FamilySpecificHook[RdWr2DTraining] = MemFAmdRdWr2DTraining;
+ NBPtr->FamilySpecificHook[CheckRdWr2DTrainingPerConfig] = MemFCheckRdWr2DTrainingPerConfig;
+ NBPtr->FamilySpecificHook[RdWr2DSelectIntExtVref] = MemFRdWr2DProgramIntExtVrefSelectKB;
+ NBPtr->FamilySpecificHook[RdWr2DProgramVref] = MemFRdWr2DProgramVrefKB;
+ NBPtr->FamilySpecificHook[RdWr2DScaleVref] = MemFRdWr2DScaleVrefKB;
+ NBPtr->FamilySpecificHook[RdWr2DProgramDelays] = MemFRdWr2DProgramDelays;
+ NBPtr->FamilySpecificHook[RdWr2DDataCollection] = MemFRdWr2DEyeRimSearch;
+ NBPtr->FamilySpecificHook[RdWr2DInitVictim] = MemFRdWr2DInitVictim;
+ NBPtr->FamilySpecificHook[RdWr2DInitVictimChipSel] = MemFRdWr2DInitVictimChipSel;
+ NBPtr->FamilySpecificHook[RdWr2DStartVictim] = MemFRdWr2DStartVictim;
+ NBPtr->FamilySpecificHook[RdWr2DFinalizeVictim] = MemFRdWr2DFinalizeVictim;
+ NBPtr->FamilySpecificHook[RdWr2DCompareInPhase] = MemFRdWr2DCompareInPhase;
+ NBPtr->FamilySpecificHook[RdWr2DCompare180Phase] = MemFRdWr2DCompare180Phase;
+ NBPtr->FamilySpecificHook[RdWr2DProgramDataPattern] = MemFRdWr2DProgramDataPatternKB;
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs Vref for 2D Read/Write Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *VrefPtr - Pointer to Vref value
+ *
+ * @return BOOLEAN
+ * TRUE - Success
+ * FAIL (External Callout only)
+ *
+ */
+BOOLEAN
+STATIC
+MemFRdWr2DProgramVrefKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *VrefPtr
+ )
+{
+ AGESA_STATUS Status;
+ MEM_DATA_STRUCT *MemPtr;
+ ID_INFO CallOutIdInfo;
+ VOLTAGE_ADJUST Va;
+ UINT8 Vref;
+
+ ASSERT (NBPtr != NULL);
+ ASSERT (VrefPtr != NULL);
+ MemPtr = NBPtr->MemPtr;
+ Vref = *(UINT8*)VrefPtr;
+ CallOutIdInfo.IdField.SocketId = NBPtr->MCTPtr->SocketId;
+ CallOutIdInfo.IdField.ModuleId = NBPtr->MCTPtr->DieId;
+ LibAmdMemCopy ((VOID *)&Va, (VOID *)MemPtr, (UINTN)sizeof (Va.StdHeader), &MemPtr->StdHeader);
+ Va.MemData = MemPtr;
+ Status = AGESA_SUCCESS;
+ if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+ if (NBPtr->RefPtr->ExternalVrefCtl == FALSE) {
+ //
+ // Internal vref control
+ //
+ ASSERT (Vref < 61);
+ if (Vref < 30) {
+ Vref = (62 - Vref);
+ } else {
+ Vref = (Vref - 30);
+ }
+ NBPtr->SetBitField (NBPtr, BFVrefDAC, Vref << 3);
+ } else {
+ //
+ // External vref control
+ //
+ AGESA_TESTPOINT (TpProcMemBefore2dTrainExtVrefChange, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->MemPtr->ParameterListPtr->ExternalVrefValue = Vref;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n2D Read Training External CPU Vref Callout \n");
+ Va.VoltageType = VTYPE_CPU_VREF;
+ Va.AdjustValue = Vref = (Vref - 15) << 1;
+ Status = AgesaExternalVoltageAdjust ((UINTN)CallOutIdInfo.IdInformation, &Va);
+ AGESA_TESTPOINT (TpProcMemAfter2dTrainExtVrefChange, &(NBPtr->MemPtr->StdHeader));
+ }
+ } else {
+ //
+ // DIMM Vref Control
+ //
+ Va.VoltageType = VTYPE_DIMM_VREF;
+ //
+ // Offset by 15 and multiply by 2.
+ //
+ Va.AdjustValue = Vref = (Vref - 15) << 1;
+ Status = AgesaExternalVoltageAdjust ((UINTN)CallOutIdInfo.IdInformation, &Va);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDimm Vref = %c%d% ", (Va.AdjustValue < 0) ? '-':'+', (Va.AdjustValue < 0) ? (0 - Va.AdjustValue) : Va.AdjustValue );
+ if (Status != AGESA_SUCCESS) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "* Dimm Vref Callout Failed *");
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ }
+ return (Status == AGESA_SUCCESS) ? TRUE : FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function scales Vref from the range used in Data Collection to
+ * the range that is programmed into the register.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *Vref - Pointer to UINT8 Vref Value to scale.
+ *
+ * @return BOOLEAN
+ * TRUE Function was implemented
+ *
+ */
+BOOLEAN
+STATIC
+MemFRdWr2DScaleVrefKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Vref
+ )
+{
+ *(UINT8*)Vref = *(UINT8*)Vref * 2;
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs Vref to internal or external control for 2D Read
+ * or Write Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *OptParam - Unused
+ *
+ * @return BOOLEAN
+ * TRUE - External Vref was selected
+ * FALSE - Internal Vref was selected
+ *
+ */
+BOOLEAN
+STATIC
+MemFRdWr2DProgramIntExtVrefSelectKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+ NBPtr->SetBitField (NBPtr, BFVrefSel, (NBPtr->RefPtr->ExternalVrefCtl ? 0x0002 : 0x0001));
+ }
+ return NBPtr->RefPtr->ExternalVrefCtl;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs the Data Pattern that will be sent and compared
+ * against.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *PatternIndexPtr - Pointer to a generic index used to
+ * determine which pattern to program.
+ *
+ * @return BOOLEAN
+ * TRUE
+ *
+ */
+BOOLEAN
+STATIC
+MemFRdWr2DProgramDataPatternKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID* PatternIndexPtr
+ )
+{
+ UINT8 SeedCount;
+ UINT32 PrbsSeed;
+ CONST STATIC UINT32 CmdStreamLenTbl[4] = {13, 61, 127, 251};
+
+ ASSERT (NBPtr != 0);
+ ASSERT (PatternIndexPtr != NULL);
+ SeedCount = *(UINT8*)PatternIndexPtr;
+ ASSERT (SeedCount <= (NBPtr->MaxSeedCount - 1));
+ MemNSetBitFieldNb (NBPtr, BFCmdStreamLen, CmdStreamLenTbl[SeedCount]);
+ PrbsSeed = 0x7EA05;
+ switch (SeedCount) {
+ case 0:
+ MemNSetBitFieldNb (NBPtr, BFDataPatGenSel, 0x01);
+ PrbsSeed = 0x7FFFF;
+ break;
+ case 1:
+ MemNSetBitFieldNb (NBPtr, BFDataPatGenSel, 0x04);
+ MemNSetBitFieldNb (NBPtr, BFXorPatOvr, 0xFF);
+ PrbsSeed = 0x7EA05;
+ break;
+ case 2:
+ MemNSetBitFieldNb (NBPtr, BFDataPatGenSel, 0x03);
+ MemNSetBitFieldNb (NBPtr, BFDramUserDataPattern0, 0x55555549);
+ MemNSetBitFieldNb (NBPtr, BFDramUserDataPattern1, 0x55555555);
+ MemNSetBitFieldNb (NBPtr, BFDramUserDataPattern2, 0x55555555);
+ MemNSetBitFieldNb (NBPtr, BFDramUserDataPattern3, 0x55555555);
+ break;
+ case 3:
+ MemNSetBitFieldNb (NBPtr, BFDataPatGenSel, 0x03);
+ MemNSetBitFieldNb (NBPtr, BFDramUserDataPattern0, 0xA5A5A55A);
+ MemNSetBitFieldNb (NBPtr, BFDramUserDataPattern1, 0xA5A5A5A5);
+ MemNSetBitFieldNb (NBPtr, BFDramUserDataPattern2, 0xA5A5A5A5);
+ MemNSetBitFieldNb (NBPtr, BFDramUserDataPattern3, 0xA5A5A5A5);
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ ASSERT (PrbsSeed != 0);
+ //
+ // Program the PRBS Seed
+ //
+ NBPtr->SetBitField (NBPtr, BFDataPrbsSeed, PrbsSeed);
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdDqs2DTraining.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdDqs2DTraining.c
new file mode 100644
index 0000000..62bfb82
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdDqs2DTraining.c
@@ -0,0 +1,115 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfRdDqs2DTraining.c
+ *
+ * RD DQS 2 dimensional training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/RdWr2DTraining)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mport.h"
+#include "mfRdWr2DTraining.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_FEAT_RDWR2DTRAINING_MFRDDQS2DTRAINING_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+ /*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes 2D training for Read DQS
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return BOOLEAN
+ * TRUE - No Errors occurred
+ * FALSE - Errors occurred
+ *
+ */
+
+BOOLEAN
+MemFAmdRdDqs2DTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemFAmdRdDqs2DTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ IDS_HDT_CONSOLE (MEM_STATUS, "\n\nStart Read DQS 2D training.\n\n");
+ TechPtr->Direction = DQS_READ_DIR;
+ return TechPtr->NBPtr->FamilySpecificHook[RdWr2DTraining] (TechPtr->NBPtr, NULL);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdWr2DEyeRimSearch.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdWr2DEyeRimSearch.c
new file mode 100644
index 0000000..090a937
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdWr2DEyeRimSearch.c
@@ -0,0 +1,1112 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfRdWr2DEyeRimSearch.c
+ *
+ * Eye Rim Sampling Algorithm for use in 2D Read DQS or 2D Write Data Training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/RdWr2DTraining)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "AdvancedApi.h"
+#include "GeneralServices.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mport.h"
+#include "merrhdl.h"
+#include "OptionMemory.h"
+#include "mfRdWr2DTraining.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DEYERIMSEARCH_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemFInitializeEyeRimSearch (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+STATIC
+MemTEyeFill (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT8
+STATIC
+DetermineSavedState (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x
+ );
+
+UINT8
+STATIC
+GetPassFailValue (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x
+ );
+
+VOID
+STATIC
+SetPassFailValue (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x,
+ IN UINT8 result
+ );
+
+VOID
+STATIC
+SetSavedState (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x,
+ IN UINT8 result
+ );
+
+INT8
+STATIC
+Get1DTrainedEyeCenter (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 lane
+ );
+
+BOOLEAN
+STATIC
+CheckForFail (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x
+ );
+
+
+INT8
+STATIC
+xlateY (
+ IN INT8 y
+ );
+
+BOOLEAN
+STATIC
+ClearSampledPassResults (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT32
+STATIC
+CompareInPhase (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT32
+STATIC
+Compare180Phase (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+STATIC
+ProgramVref (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Vref
+ );
+
+VOID
+STATIC
+StartAggressors (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BOOLEAN TurnOn
+ );
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Initialize Eye Rim Search
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return BOOLEAN
+ * TRUE
+ */
+BOOLEAN
+STATIC
+MemFInitializeEyeRimSearch (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ UINT8 lane;
+ UINT8 vref;
+ MEM_RD_WR_2D_ENTRY *Data;
+ MEM_RD_WR_2D_RIM_ENTRY *RimData;
+
+ ASSERT (NBPtr != NULL);
+ TechPtr = NBPtr->TechPtr;
+ Data = TechPtr->RdWr2DData;
+ RimData = Data->SavedData;
+ //
+ // Set Boundaries
+ //
+ RimData->xMax = Data->MaxRdWrSweep - 1;
+ RimData->yMax = (NBPtr->TotalMaxVrefRange / 2) - 1;
+ RimData->xMin = RimData->xMax * -1;
+ RimData->yMin = RimData->yMax * -1;
+
+ RimData->ParallelSampling = EYERIM_PARALLEL_SAMPLING;
+ RimData->BroadcastDelays = EYERIM_BROADCAST_DELAYS;
+ RimData->Dirs[0] = 1;
+ RimData->Dirs[1] = -1;
+
+ RimData->SampleCount = 0;
+ RimData->VrefUpdates = 0;
+ RimData->RdWrDlyUpdates = 0;
+ for (lane = 0; lane < MemFRdWr2DGetMaxLanes (NBPtr); lane ++ ) {
+ for ( vref = 0; vref < NBPtr->TotalMaxVrefRange; vref ++ ) {
+ // 00b = state not saved
+ // 01b = state saved
+ RimData->LaneSaved[lane].Vref[vref].PosRdWrDly = 0;
+ RimData->LaneSaved[lane].Vref[vref].NegRdWrDly = 0;
+ // 00b = Fail
+ // 01b = Pass
+ Data->Lane[lane].Vref[vref].PosRdWrDly = 0;
+ Data->Lane[lane].Vref[vref].NegRdWrDly = 0;
+ }
+ }
+ if (TechPtr->Direction == DQS_READ_DIR) {
+ NBPtr->MaxSeedCount = MAX_2D_RD_SEED_COUNT;
+ } else {
+ //
+ // Set the seed count in terms of the Total desired bit times
+ //
+ NBPtr->MaxSeedCount = (UINT8) (NBPtr->TotalBitTimes2DWrTraining / (256 * 8 * MIN ( 1, NBPtr->MaxAggressorDimms[NBPtr->Dct])));
+ };
+ TechPtr->DqsRdWrPosSaved = 0;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\tTotal Bit Times: %d Max Seed Count: %d\n",(TechPtr->Direction == DQS_READ_DIR) ? NBPtr->TotalBitTimes2DRdTraining:NBPtr->TotalBitTimes2DWrTraining,NBPtr->MaxSeedCount);
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * This function collects data for Eye Rim Search
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *OptParam - Not Used
+ *
+ * @return BOOLEAN
+ * TRUE - No Errors occurred
+ * FALSE - Errors occurred
+ *
+ */
+BOOLEAN
+MemFRdWr2DEyeRimSearch (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID * OptParam
+ )
+{
+ UINT8 lane;
+ UINT8 j;
+ UINT8 k;
+ INT8 ydir;
+ INT8 xdir;
+ INT8 xi;
+ INT8 yi;
+ INT8 x;
+ INT8 y;
+ INT8 xmax;
+ INT8 ymax;
+ INT8 xmin;
+ INT8 ymin;
+ INT8 xo;
+ INT8 xt;
+ INT8 yo;
+ INT8 yt;
+ UINT8 slane;
+ UINT8 result;
+ INT8 states[2];
+ UINT8 InitialCS;
+ UINT8 ChipSel;
+ UINT8 Aggr;
+ UINT8 SeedCount;
+ UINT32 InPhaseResult;
+ UINT32 PhaseResult180;
+ UINT32 Result;
+ MEM_RD_WR_2D_ENTRY *Data;
+ MEM_RD_WR_2D_RIM_ENTRY RimData;
+ MEM_TECH_BLOCK *TechPtr;
+ RD_WR_2D *VrefPtr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ ASSERT (NBPtr != NULL);
+ TechPtr = NBPtr->TechPtr;
+ Data = TechPtr->RdWr2DData;
+ //
+ // Allocate Storage for Rim Search
+ //
+ AllocHeapParams.RequestedBufferSize = MemFRdWr2DGetMaxLanes (NBPtr) * NBPtr->TotalMaxVrefRange * sizeof (RD_WR_2D);
+ AllocHeapParams.BufferHandle = AMD_MEM_2D_RD_WR_RIM_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, &NBPtr->MemPtr->StdHeader) == AGESA_SUCCESS) {
+ VrefPtr = (RD_WR_2D *) AllocHeapParams.BufferPtr;
+ } else {
+ SetMemError (AGESA_FATAL, NBPtr->MCTPtr);
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_2D, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+ return FALSE;
+ }
+ for (lane = 0; lane < MemFRdWr2DGetMaxLanes (NBPtr); lane++) {
+ RimData.LaneSaved[lane].Vref = &VrefPtr[lane * NBPtr->TotalMaxVrefRange];
+ }
+ Data->SavedData = &RimData;
+
+ MemFInitializeEyeRimSearch (NBPtr);
+ NBPtr->FamilySpecificHook[RdWr2DSelectIntExtVref] (NBPtr, NULL);
+ InitialCS = TechPtr->ChipSel;
+ NBPtr->FamilySpecificHook[Adjust2DPhaseMaskBasedOnEcc] (NBPtr, &NBPtr);
+ NBPtr->FamilySpecificHook[RdWr2DInitVictim] (NBPtr, NULL);
+ //
+ // EnableDisable continuous writes on the agressor channels
+ //
+
+ for (Aggr = 0; Aggr < MAX (1 , NBPtr->MaxAggressorDimms[NBPtr->Dct]) ; Aggr += (NBPtr->IsSupported[PerDimmAggressors2D] ? 2 : NBPtr->CsPerDelay) ) {
+ ClearSampledPassResults (NBPtr);
+ //
+ // Enable continuous writes on the aggressors
+ //
+ StartAggressors (NBPtr, TRUE);
+ for (ChipSel = InitialCS; ChipSel < (InitialCS + NBPtr->CsPerDelay); ChipSel++) {
+ xmax = RimData.xMax;
+ xmin = RimData.xMin;
+ ymax = RimData.yMax;
+ ymin = RimData.yMin;
+ if ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) != 0) {
+ TechPtr->ChipSel = ChipSel;
+ Data->RdWrDly = Data->MaxRdWrSweep;
+ for (lane = 0; lane < MemFRdWr2DGetMaxLanes (NBPtr); lane ++ ) {
+ //
+ // Two loops to handle each quadrant from the trained point
+ //
+ for ( j = 0; j < 2; j++) {
+ ydir = RimData.Dirs[j];
+ for ( k = 0; k < 2; k++) {
+ xdir = RimData.Dirs[k];
+ //
+ // Sample Loops - stay w/n the defined quadrant
+ // assume xmax = -1 * xmin, ymax = -1 * ymin
+ // initial point must always pass
+ // end point - boundary or two consecutive fails along the y-axis
+ //
+ // Initial dx, dy step state
+ // Starting dy at 8 to reduce samples necessary searching for the eye height
+ states[0] = 0;
+ states[1] = 8;
+ // xi and yi are inital trained points, assumed to be inside the eye
+ // These set the coordinate syst em for the quadrants
+ xi = Get1DTrainedEyeCenter (NBPtr, lane);
+ yi = 0; // Initial center is always at Vref nominal
+ x = xi;
+ y = yi;
+ while (
+ ((xdir > 0 && x >= xi && x <= xmax) ||
+ (xdir < 0 && x <= xi && x >= xmin)) &&
+ ((ydir > 0 && y >= yi && y <= ymax) ||
+ (ydir < 0 && y <= yi && y >= ymin)) &&
+ !(y == yi && (xdir * (xi - x) >= 2))
+ ) {
+ //
+ // Decide if result is already sampled, or need to take the sample
+ //
+ if (0 == DetermineSavedState (NBPtr, lane, y, x)) {
+ RimData.SampleCount++;
+ //
+ // Result for this point is not in the cache, sample it
+ //
+ for (slane = 0; slane < MemFRdWr2DGetMaxLanes (NBPtr); slane ++ ) {
+ if (!RimData.ParallelSampling && ( slane != lane)) {
+ continue;
+ }
+ //
+ // Calculate the relative offset from the initial trained position for this lane
+ //
+ xo = Get1DTrainedEyeCenter (NBPtr, slane);
+ yo = 0;
+ xt = xo + (x - xi);
+ yt = yo + (y - yi);
+ if (xt > xmax || xt < xmin || yt > ymax || yt < ymin) {
+ continue;
+ }
+ //
+ // Update the vref and lane delays (yt, xt)
+ //
+ if (slane == lane) {
+ //
+ // For processors w/ a single Vref per channel, only set Vref once
+ //
+ if ( NBPtr->Vref != xlateY (yt)) {
+ //
+ // If not already set
+ //
+ RimData.VrefUpdates++;
+ NBPtr->Vref = xlateY (yt);
+ ProgramVref (NBPtr, NBPtr->Vref);
+ }
+ }
+ if (RimData.BroadcastDelays) {
+ //
+ // When BroadcastDelays, only set RdDqs once
+ //
+ if (slane == lane) {
+ //
+ // If current lane
+ //
+ if ( Data->RdWrDly != (UINT8) (xt & RimData.xMax)) {
+ //
+ // If the not already set
+ // Account for rollover.
+ //
+ RimData.RdWrDlyUpdates++;
+ Data->RdWrDly = (UINT8) (xt & RimData.xMax);
+ NBPtr->FamilySpecificHook[RdWr2DProgramDelays] (NBPtr, &Data->RdWrDly);
+ }
+ }
+ } else {
+ //
+ // For Reads, Program all RdDqs Delay Values the same
+ // For Writes, Program all WrDat Values with same value offset by WrDqs for that lane.
+ //
+ if ( Data->RdWrDly != (UINT8) (xt & RimData.xMax)) {
+ //
+ // If the not already set
+ // Account for rollover.
+ //
+ RimData.RdWrDlyUpdates++;
+ Data->RdWrDly = (UINT8) (xt & RimData.xMax);
+ MemTSetDQSDelayAllCSR (TechPtr, (UINT8) (xt & RimData.xMax));
+ }
+ }
+ }
+ //
+ // Perform Memory RW test
+ //
+ InPhaseResult = 0;
+ PhaseResult180 = 0;
+ NBPtr->FamilySpecificHook[RdWr2DInitVictimChipSel] (NBPtr, NULL);
+ for (SeedCount = 0; SeedCount < NBPtr->MaxSeedCount; SeedCount++) {
+ //
+ // Begin continuous reads and writes on the victim channels
+ //
+ NBPtr->FamilySpecificHook[RdWr2DStartVictim] (NBPtr, &SeedCount);
+ //
+ // Occasionally check if all trained lanes have already failed
+ //
+ if ((NBPtr->MaxSeedCount < 4) || ((SeedCount % (NBPtr->MaxSeedCount / 4)) == 0)) {
+ InPhaseResult |= CompareInPhase (NBPtr);
+ PhaseResult180 |= Compare180Phase (NBPtr);
+ if (((InPhaseResult & NBPtr->PhaseLaneMask) == NBPtr->PhaseLaneMask) &&
+ ((PhaseResult180& NBPtr->PhaseLaneMask) == NBPtr->PhaseLaneMask)) {
+ break;
+ }
+ }
+ }
+ //
+ // Obtain the results
+ //
+ for (slane = 0; slane < MemFRdWr2DGetMaxLanes (NBPtr); slane ++ ) {
+ if (!RimData.ParallelSampling && (slane != lane)) {
+ continue;
+ }
+ //
+ // Calculate the relative offset from legacy trained
+ //
+ xo = Get1DTrainedEyeCenter (NBPtr, RimData.BroadcastDelays?lane:slane);
+ yo = 0;
+ xt = xo + (x - xi);
+ yt = yo + (y - yi);
+ if (xt > xmax || xt < xmin || yt > ymax || yt < ymin) {
+ continue;
+ }
+ //
+ // In this example, data{}{}{} = 1 is a Fail, 0 is a Pass
+ // In-Phase Results
+ //
+ if (CheckForFail (NBPtr, slane, yt, xt)) {
+ //
+ // Don't overwrite a fail
+ //
+ if (xt >= 0) {
+ if ((NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (TechPtr->ChipSel >> 1))) == 0) {
+ // x8, so combine "Nibble X" and "Nibble X+1" results
+ Result = (InPhaseResult >> (slane * 2)) & 0x03;
+ } else {
+ // x4, so use "Nibble" results
+ Result = (InPhaseResult >> slane) & 0x01;
+ }
+ SetPassFailValue (NBPtr, slane, yt, xt, (UINT8) (Result & 0x0F));
+ SetSavedState (NBPtr, slane, yt, xt, (UINT8) (Result & 0x0F));
+ } else {
+ if ((NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (TechPtr->ChipSel >> 1))) == 0) {
+ // x8, so combine "Nibble X" and "Nibble X+1" results
+ Result = (PhaseResult180 >> (slane * 2)) & 0x03;
+ } else {
+ // x4, so use "Nibble" results
+ Result = (PhaseResult180 >> slane) & 0x01;
+ }
+ SetPassFailValue (NBPtr, slane, yt, xt, (UINT8) (Result & 0x0F));
+ SetSavedState (NBPtr, slane, yt, xt, (UINT8) (Result & 0x0F));
+ }
+ }
+ }
+ }
+ // Decide the next sample point based on the result of the current lane
+ result = GetPassFailValue (NBPtr, lane, y, x);
+ InPhaseResult = 0;
+ PhaseResult180 = 0;
+ // States && comments are relative to the ++ Quadrant
+ if (result == 3) {
+ // Current Pass
+ if (states[0] > 0 || states[1] > 0) {
+ if (states[1] > 1 && y * ydir <= ymax - states[1]) {
+ // Current Pass, Continue searching up by leaps
+ states[0] = 0;
+ } else if (states[1] > 1 && y * ydir <= ymax - 4) {
+ // Current Pass, Continue searching up by leaps
+ states[0] = 0;
+ states[1] = 4;
+ } else if (states[1] > 1 && y * ydir <= ymax - 2) {
+ // Current Pass, Continue searching up by leaps
+ states[0] = 0;
+ states[1] = 2;
+ } else if (y * ydir <= ymax - 1) {
+ // Current Pass, Continue searching up by one
+ states[0] = 0;
+ states[1] = 1;
+ } else if (y * ydir == ymax) {
+ // Current Pass and at the top edge, Move right
+ states[0] = 1;
+ states[1] = 0;
+ } else {
+ ASSERT (FALSE);
+ }
+ } else {
+ // Move right one
+ states[0] = 1;
+ states[1] = 0;
+ }
+ } else if (result == 2) {
+ // Current Fail
+ if (states[0] > 0) {
+ // Search down and left
+ states[0] = -1;
+ states[1] = -1;
+ } else if (states[1] > 1 || states[1] < 0) {
+ // Search down
+ states[0] = 0;
+ states[1] = -1;
+ } else if (states[1] == 1) {
+ // Move down and right
+ states[0] = 1;
+ states[1] = -1;
+ } else {
+ ASSERT (FALSE);
+ }
+ } else {
+ ASSERT (FALSE);
+ }
+ // Update the coordinates based on the new state and quadrant direction
+ x += xdir * states[0];
+ y += ydir * states[1];
+ }
+ }
+ }
+ }
+ }
+ }
+ //
+ // Disable continuous writes on the agressor channels
+ //
+ StartAggressors (NBPtr, FALSE);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW,"\n\tSampleCount:%d",RimData.SampleCount);
+ IDS_HDT_CONSOLE (MEM_FLOW,"\t\tVref Updates:%d",RimData.VrefUpdates);
+ IDS_HDT_CONSOLE (MEM_FLOW,"\t\tRdDqs Dly Updates:%d\n",RimData.RdWrDlyUpdates);
+ //
+ // Finilazing Victim Continuous writes
+ //
+ NBPtr->FamilySpecificHook[RdWr2DFinalizeVictim] (NBPtr, NULL);
+ TechPtr->ChipSel = InitialCS;
+ //
+ // Fill eye based on Rim Search results
+ //
+ MemTEyeFill (NBPtr);
+ //
+ // Display the results the completed eye
+ //
+ MemFRdWr2DDisplaySearch (NBPtr, Data);
+ //
+ // Restore environment settings after training
+ //
+ if (HeapDeallocateBuffer (AMD_MEM_2D_RD_WR_RIM_HANDLE, &NBPtr->MemPtr->StdHeader) != AGESA_SUCCESS) {
+ SetMemError (AGESA_FATAL, NBPtr->MCTPtr);
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_DEALLOCATE_FOR_2D, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+ }
+ return TRUE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * Fill the data eye
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+STATIC
+MemTEyeFill (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ INT8 x;
+ INT8 y;
+ UINT8 lane;
+ UINT8 result;
+ INT8 yLastPass;
+ UINT8 xMax;
+ UINT8 yMax;
+ UINT8 xMin;
+ UINT8 yMin;
+ BOOLEAN FirstPassFound;
+ MEM_RD_WR_2D_RIM_ENTRY *SavedData;
+
+ ASSERT (NBPtr != NULL);
+ SavedData = ((MEM_RD_WR_2D_ENTRY*)NBPtr->TechPtr->RdWr2DData)->SavedData;
+
+ xMax = SavedData->xMax;
+ yMax = SavedData->yMax;
+ xMin = SavedData->xMin;
+ yMin = SavedData->yMin;
+ for (lane = 0; lane < MemFRdWr2DGetMaxLanes (NBPtr); lane++) {
+ for (x = xMin ; x <= xMax ; x++) {
+ FirstPassFound = FALSE;
+ yLastPass = yMin;
+ //
+ // Scan for the last passing value
+ //
+ for (y = yMax ; y >= yLastPass ; y--) {
+ result = GetPassFailValue (NBPtr, lane, y, x);
+ if (result == 0) {
+ //
+ // Not Saved, Mark it as FAIL. (Should already be cleared)
+ //
+ } else if (result == 2) {
+ //
+ // FAIL, so Mark as FAIL (Do nothing)
+ //
+ } else if (result == 3) {
+ //
+ // PASS, Mark it and save y value (This will end the loop)
+ //
+ SetPassFailValue (NBPtr, lane, y, x, result);
+ yLastPass = y;
+ } else {
+ ASSERT (FALSE);
+ }
+ }
+ //
+ // Scan for the first pass, the fill until the last pass
+ //
+ for (y = yMin ; y < yLastPass ; y++) {
+ result = GetPassFailValue (NBPtr, lane, y, x);
+ if (result == 0) {
+ //
+ // Not Saved, if we've already found a first Passing value, mark it as a PASS
+ // otherwise, mark it as FAIL. (Should already be cleared)
+ //
+ if (FirstPassFound == TRUE) {
+ SetPassFailValue (NBPtr, lane, y, x, result);
+ }
+ } else if (result == 2) {
+ //
+ // FAIL, so Mark as FAIL (Do nothing)
+ //
+ } else if (result == 3) {
+ //
+ // PASS, Mark it and set FirstPassFound
+ //
+ SetPassFailValue (NBPtr, lane, y, x, result);
+ FirstPassFound = TRUE;
+ } else {
+ ASSERT (FALSE);
+ }
+ } // y Loop
+ } //x Loop
+ } // Lane Loop
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Get the 1D trained center
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] lane - UINT8 of current lane
+ *
+ * @return INT8 - Eye Center
+ */
+INT8
+STATIC
+Get1DTrainedEyeCenter (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 lane
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ ASSERT (NBPtr != NULL);
+ TechPtr = NBPtr->TechPtr;
+ if (TechPtr->Direction == DQS_READ_DIR) {
+ if ((NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (TechPtr->ChipSel >> 1))) == 0) {
+ // Program Byte based for x8 and x16
+ return (INT8)NBPtr->ChannelPtr->RdDqsDlys[(TechPtr->ChipSel / NBPtr->CsPerDelay) * MAX_DELAYS + lane];
+ } else {
+ return (INT8)NBPtr->ChannelPtr->RdDqsDlys[(TechPtr->ChipSel / NBPtr->CsPerDelay) * MAX_DELAYS + (lane >> 1)];
+ }
+ } else {
+ return (INT8) (NBPtr->ChannelPtr->WrDatDlys[(TechPtr->ChipSel / NBPtr->CsPerDelay) * MAX_DELAYS + lane] -
+ NBPtr->ChannelPtr->WrDqsDlys[(TechPtr->ChipSel / NBPtr->CsPerDelay) * MAX_DELAYS + lane]);
+ }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Determine if a Byte Lane result has been saved
+ *
+ * @param[in,out] *NBPtr - Pointer to MEM_NB_BLOCK
+ * @param[in] lane - Current lane
+ * @param[in] y - Vref value
+ * @param[in] x - Delay
+ *
+ * @return UINT8
+ * 1 - value saved
+ * 0 - value not saved
+ */
+UINT8
+STATIC
+DetermineSavedState (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x
+ )
+{
+ MEM_RD_WR_2D_RIM_ENTRY *SavedData;
+
+ ASSERT (NBPtr != NULL);
+ SavedData = ((MEM_RD_WR_2D_ENTRY*)NBPtr->TechPtr->RdWr2DData)->SavedData;
+
+ if (x >= 0) {
+ return (UINT8) (SavedData->LaneSaved[lane].Vref[xlateY (y)].PosRdWrDly >> (SavedData->xMax - (x & SavedData->xMax)) & 0x1);
+ } else {
+ return (UINT8) (SavedData->LaneSaved[lane].Vref[xlateY (y)].NegRdWrDly >> (SavedData->xMax - (x & SavedData->xMax)) & 0x1);
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Determine if a failure has occured
+ *
+ * @param[in,out] *NBPtr - Pointer to MEM_NB_BLOCK
+ * @param[in] lane - Current lane
+ * @param[in] y - Vref value
+ * @param[in] x - Delay Value
+ *
+ * @return BOOLEAN
+ * FALSE - Fail
+ * TRUE - Pass
+ */
+BOOLEAN
+STATIC
+CheckForFail (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x
+ )
+{
+ MEM_RD_WR_2D_RIM_ENTRY *SavedData;
+
+ ASSERT (NBPtr != NULL);
+ SavedData = ((MEM_RD_WR_2D_ENTRY*)NBPtr->TechPtr->RdWr2DData)->SavedData;
+
+ if (x >= 0) {
+ if ((SavedData->LaneSaved[lane].Vref[xlateY (y)].PosRdWrDly >> (SavedData->xMax - (x & SavedData->xMax)) & 0x1) == 0) {
+ // value not saved, so it is not fail
+ return TRUE;
+ } else {
+ // value saved, so examine result
+ if ((SavedData->LaneSaved[lane].Vref[xlateY (y)].PosRdWrDly >> (SavedData->xMax - (x & SavedData->xMax)) & 0x1) == 0) {
+ // result = fail
+ return FALSE;
+ } else {
+ // result = pass
+ return TRUE;
+ }
+ }
+ } else {
+ if ((SavedData->LaneSaved[lane].Vref[xlateY (y)].NegRdWrDly >> (SavedData->xMax - (x & SavedData->xMax)) & 0x1) == 0) {
+ // value not saved, so it is not fail
+ return TRUE;
+ } else {
+ // value saved, so examine result
+ if ((SavedData->LaneSaved[lane].Vref[xlateY (y)].NegRdWrDly >> (SavedData->xMax - (x & SavedData->xMax)) & 0x1) == 0) {
+ // result = fail
+ return FALSE;
+ } else {
+ // result = pass
+ return TRUE;
+ }
+ }
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Get pass fail state of lane
+ *
+ * @param[in,out] *NBPtr - Pointer to MEM_NB_BLOCK
+ * @param[in] lane - Current lane
+ * @param[in] y - Vref value
+ * @param[in] x - Delay Value
+ *
+ * @return UINT8
+ * 0 - Value not saved,
+ * 2 - Fail,
+ * 3 - Pass
+ */
+UINT8
+STATIC
+GetPassFailValue (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ MEM_RD_WR_2D_ENTRY* RdWr2DData;
+ MEM_RD_WR_2D_RIM_ENTRY *SavedData;
+
+ ASSERT (NBPtr != NULL);
+ TechPtr = NBPtr->TechPtr;
+ RdWr2DData = TechPtr->RdWr2DData;
+ SavedData = RdWr2DData->SavedData;
+
+ if (x >= 0) {
+ if ((SavedData->LaneSaved[lane].Vref[xlateY (y)].PosRdWrDly >> (SavedData->xMax - (x & SavedData->xMax)) & 0x1) == 0) {
+ // value not saved
+ return 0;
+ } else {
+ // value saved, so return pass/fail
+ return ((RdWr2DData->Lane[lane].Vref[xlateY (y)].PosRdWrDly >> (SavedData->xMax - (x & SavedData->xMax)) & 0x1) == 0) ? 2 : 3;
+ }
+ } else {
+ if ((SavedData->LaneSaved[lane].Vref[xlateY (y)].NegRdWrDly >> (SavedData->xMax - (x & SavedData->xMax)) & 0x1) == 0) {
+ // value not saved
+ return 0;
+ } else {
+ // value saved, so return pass/fail
+ return ((RdWr2DData->Lane[lane].Vref[xlateY (y)].NegRdWrDly >> (SavedData->xMax - (x & SavedData->xMax)) & 0x1) == 0) ? 2 : 3;
+ }
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Set the Pass/Fail state of lane
+ *
+ * @param[in,out] *NBPtr - Pointer to MEM_NB_BLOCK
+ * @param[in] lane - Current lane
+ * @param[in] y - Vref value
+ * @param[in] x - Delay Value
+ * @param[in] result - result value
+ *
+ */
+VOID
+STATIC
+SetPassFailValue (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x,
+ IN UINT8 result
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ MEM_RD_WR_2D_ENTRY* RdWr2DData;
+ MEM_RD_WR_2D_RIM_ENTRY *SavedData;
+
+ ASSERT (NBPtr != NULL);
+ TechPtr = NBPtr->TechPtr;
+ RdWr2DData = TechPtr->RdWr2DData;
+ SavedData = RdWr2DData->SavedData;
+
+ if (x >= 0) {
+ RdWr2DData->Lane[lane].Vref[xlateY (y)].PosRdWrDly |= (result == 0) ? (1 << (SavedData->xMax - (x & SavedData->xMax))) : 0;
+ } else {
+ RdWr2DData->Lane[lane].Vref[xlateY (y)].NegRdWrDly |= (result == 0) ? (1 << (SavedData->xMax - (x & SavedData->xMax))) : 0;
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Set the save state of lane
+ *
+ * @param[in,out] *NBPtr - Pointer to MEM_NB_BLOCK
+ * @param[in] lane - Current lane
+ * @param[in] y - Vref value
+ * @param[in] x - Delay Value
+ * @param[in] result - result value
+ *
+ */
+VOID
+STATIC
+SetSavedState (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x,
+ IN UINT8 result
+ )
+{
+ MEM_RD_WR_2D_RIM_ENTRY *SavedData;
+
+ ASSERT (NBPtr != NULL);
+ SavedData = ((MEM_RD_WR_2D_ENTRY*)NBPtr->TechPtr->RdWr2DData)->SavedData;
+
+ if (x >= 0) {
+ SavedData->LaneSaved[lane].Vref[xlateY (y)].PosRdWrDly |= (1 << (SavedData->xMax - (x & SavedData->xMax)));
+ } else {
+ SavedData->LaneSaved[lane].Vref[xlateY (y)].NegRdWrDly |= (1 << (SavedData->xMax - (x & SavedData->xMax)));
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Translate Vref into a positive, linear value that can be used as an
+ * array index.
+ *
+ * @param[in] y - INT8 of the (signed) Vref value
+ *
+ * @return UINT8 - Translated Value
+ */
+INT8
+STATIC
+xlateY (
+ IN INT8 y
+ )
+{
+ ASSERT ( y > -0x10);
+ ASSERT ( y < 0x10);
+ return (y + 0xF) & 0x1F;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Re-walk the eye rim for each aggressor combination, which invalidates
+ * previous Passes in the sample array. Previous Fails in the sample array
+ * remain valid. Knowledge of previous fails and speeds sampling for the
+ * subsequent walks, esp. when used in conjunction w/ ParallelSampling.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return BOOLEAN
+ * TRUE
+ */
+BOOLEAN
+STATIC
+ClearSampledPassResults (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 lane;
+ UINT8 vref;
+ MEM_RD_WR_2D_ENTRY *Data;
+ MEM_RD_WR_2D_RIM_ENTRY *RimData;
+
+ ASSERT (NBPtr != NULL);
+
+ Data = (MEM_RD_WR_2D_ENTRY*)NBPtr->TechPtr->RdWr2DData;
+ RimData = Data->SavedData;
+
+ for (lane = 0; lane < MemFRdWr2DGetMaxLanes (NBPtr); lane ++ ) {
+ for ( vref = 0; vref < NBPtr->TotalMaxVrefRange; vref ++ ) {
+ RimData->LaneSaved[lane].Vref[vref].PosRdWrDly &= ~(Data->Lane[lane].Vref[vref].PosRdWrDly);
+ Data->Lane[lane].Vref[vref].PosRdWrDly = 0;
+ RimData->LaneSaved[lane].Vref[vref].NegRdWrDly &= ~(Data->Lane[lane].Vref[vref].NegRdWrDly);
+ Data->Lane[lane].Vref[vref].NegRdWrDly = 0;
+ }
+ }
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Perform in-phase comparison
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return UINT32 - Bitmap of results of comparison
+ * 1 = FAIL
+ * 0 = PASS
+ */
+
+UINT32
+STATIC
+CompareInPhase (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT32 Result;
+ Result = 0;
+ NBPtr->FamilySpecificHook[RdWr2DCompareInPhase] (NBPtr, &Result);
+ return Result;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Perform 180 Degree out-of-phase comparison
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return UINT32 - Bitmap of results of comparison
+ * 1 = FAIL
+ * 0 = PASS
+ */
+
+UINT32
+STATIC
+Compare180Phase (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT32 Result;
+ Result = 0;
+ NBPtr->FamilySpecificHook[RdWr2DCompare180Phase] (NBPtr, &Result);
+ return Result;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Program Vref after scaling to accomodate the register definition
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Vref - UINT8 value of Vref relative to the sample point
+ *
+ */
+
+VOID
+STATIC
+ProgramVref (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Vref
+ )
+{
+ UINT8 ScaledVref;
+ ScaledVref = Vref;
+ NBPtr->FamilySpecificHook[RdWr2DScaleVref] (NBPtr, &ScaledVref);
+ NBPtr->FamilySpecificHook[RdWr2DProgramVref] (NBPtr, &ScaledVref);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Turn Aggressor Channels On or Off
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] TurnOn - BOOLEAN
+ * TRUE - Turn On, False = Turn Off.
+ */
+
+VOID
+STATIC
+StartAggressors (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BOOLEAN TurnOn
+ )
+{
+ NBPtr->FamilySpecificHook[TurnOnAggressorChannels] (NBPtr, &TurnOn);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdWr2DPatternGeneration.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdWr2DPatternGeneration.c
new file mode 100644
index 0000000..b8d8429
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdWr2DPatternGeneration.c
@@ -0,0 +1,424 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfRdWr2DPatternGeneration.c
+ *
+ * Common Northbridge features
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/RdWr2DTraining)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mport.h"
+#include "PlatformMemoryConfiguration.h"
+#include "merrhdl.h"
+#include "OptionMemory.h"
+#include "mfRdWr2DTraining.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DPATTERNGENERATION_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+ /* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function Initializes the Victim for 2D RdDqs Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *OptParam - Unused
+ *
+ * @return BOOLEAN
+ * TRUE
+ */
+BOOLEAN
+MemFRdWr2DInitVictim (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ RRW_SETTINGS *Rrw;
+ UINT8 InitialCS;
+ UINT8 ChipSel;
+ UINT8 SeedCount;
+ BOOLEAN OptPatWr2D;
+
+ OptPatWr2D = (NBPtr->IsSupported[OptimizedPatternWrite2D]) && (NBPtr->TechPtr->Direction == DQS_READ_DIR);
+ InitialCS = NBPtr->TechPtr->ChipSel;
+ Rrw = &NBPtr->RrwSettings;
+ // Program the Bubble Count and CmdStreamLen
+ NBPtr->SetBitField (NBPtr, BFBubbleCnt, 32);
+ NBPtr->SetBitField (NBPtr, BFBubbleCnt2, 0);
+ NBPtr->SetBitField (NBPtr, BFCmdStreamLen, 63);
+ // Set Comparison Masks
+ NBPtr->SetBitField (NBPtr, BFDramDqMaskLow, Rrw->CompareMaskLow);
+ NBPtr->SetBitField (NBPtr, BFDramDqMaskHigh, Rrw->CompareMaskHigh);
+ // If All Dimms are ECC Capable Test ECC. Otherwise, mask it off
+ NBPtr->SetBitField (NBPtr, BFDramEccMask, (NBPtr->MCTPtr->Status[SbEccDimms] == TRUE) ? Rrw->CompareMaskEcc : 0xFF);
+ // Program the Starting Address
+ NBPtr->SetBitField (NBPtr, BFTgtBankA, Rrw->TgtBankAddressA);
+ NBPtr->SetBitField (NBPtr, BFTgtAddressA, Rrw->TgtColAddressA);
+ NBPtr->SetBitField (NBPtr, BFTgtBankB, Rrw->TgtBankAddressB);
+ NBPtr->SetBitField (NBPtr, BFTgtAddressB, Rrw->TgtColAddressB);
+ NBPtr->SetBitField (NBPtr, BFCmdTgt, CMD_TGT_AB);
+ // Wait for RRW Engine to be ready and turn it on
+ NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 1);
+ for (ChipSel = InitialCS; ChipSel < (InitialCS + NBPtr->CsPerDelay); ChipSel++) {
+ // Ensure that Odd and Even CS are trained
+ if ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) == 0) {
+ continue;
+ }
+ NBPtr->TechPtr->ChipSel = ChipSel;
+ for (SeedCount = 0; SeedCount < (OptPatWr2D ? NBPtr->MaxSeedCount : 1 ); SeedCount++) {
+ if (OptPatWr2D) {
+ //
+ // Set BankAddress according to seed
+ //
+ ASSERT (NBPtr->MaxSeedCount <= 4);
+ Rrw->TgtBankAddressA = (SeedCount * 2) + CPG_BANK_ADDRESS_A;
+ Rrw->TgtBankAddressB = (SeedCount * 2) + CPG_BANK_ADDRESS_B;
+ }
+ //
+ // Send ACTIVATE to all Banks
+ //
+ // Set Chip select
+ MemNSetBitFieldNb (NBPtr, BFCmdChipSelect, (1 << NBPtr->TechPtr->ChipSel));
+ // Set Bank Address
+ MemNSetBitFieldNb (NBPtr, BFCmdBank, Rrw->TgtBankAddressA);
+ // Set Row Address
+ MemNSetBitFieldNb (NBPtr, BFCmdAddress, Rrw->TgtRowAddressA);
+ // Send the command
+ MemNSetBitFieldNb (NBPtr, BFSendActCmd, 1);
+ // Wait for command complete
+ MemNPollBitFieldNb (NBPtr, BFSendActCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ // Set Chip select
+ MemNSetBitFieldNb (NBPtr, BFCmdChipSelect, (1 << NBPtr->TechPtr->ChipSel));
+ // Set Bank Address
+ MemNSetBitFieldNb (NBPtr, BFCmdBank, Rrw->TgtBankAddressB);
+ // Set Row Address
+ MemNSetBitFieldNb (NBPtr, BFCmdAddress, Rrw->TgtRowAddressB);
+ // Send the command
+ MemNSetBitFieldNb (NBPtr, BFSendActCmd, 1);
+ // Wait for command complete
+ MemNPollBitFieldNb (NBPtr, BFSendActCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+
+ if (OptPatWr2D) {
+ //
+ // Write the Pattern to the bank pairs for each seed.
+ //
+ NBPtr->FamilySpecificHook[RdWr2DInitVictimChipSel] (NBPtr, NULL);
+ NBPtr->SetBitField (NBPtr, BFTgtBankA, Rrw->TgtBankAddressA);
+ NBPtr->SetBitField (NBPtr, BFTgtBankB, Rrw->TgtBankAddressB);
+ // Program the PRBS Seed
+ NBPtr->FamilySpecificHook[RdWr2DProgramDataPattern] (NBPtr, &SeedCount);
+ //
+ // Enable continuous writes on the victim channels
+ //
+ // Set the Command Count
+ NBPtr->SetBitField (NBPtr, BFCmdCount, 256);
+ NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_WRITE);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+ // Wait for TestStatus = 1 and CmdSendInProg = 0.
+ NBPtr->PollBitField (NBPtr, BFTestStatus, 1, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+ }
+ }
+ }
+ if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+ //
+ // Do not use LFSR Rollover during Wr Training
+ //
+ NBPtr->SetBitField (NBPtr, BFLfsrRollOver, 1);
+ }
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function Initializes the Victim chipSelects for 2D Read or Write
+ * Training Continuous Writes
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *OptParam - Unused
+ *
+ * @return BOOLEAN
+ * TRUE
+ */
+BOOLEAN
+MemFRdWr2DInitVictimChipSel (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ NBPtr->SetBitField (NBPtr, BFTgtChipSelectA, NBPtr->TechPtr->ChipSel);
+ NBPtr->SetBitField (NBPtr, BFTgtChipSelectB, NBPtr->TechPtr->ChipSel);
+ NBPtr->SetBitField (NBPtr, BFResetAllErr, 1);
+ return TRUE;
+}
+
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function checks the In Phase Error status bits for comparison
+ * results for RD/WR 2D training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[out] *Result - Pointer to UINT32 for storing results
+ *
+ * @return BOOLEAN
+ * TRUE
+ *
+ */
+BOOLEAN
+MemFRdWr2DCompareInPhase (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ OUT VOID *Result
+ )
+{
+ *(UINT32*)Result = NBPtr->GetBitField (NBPtr, BFNibbleErrSts);
+ return TRUE;
+}
+
+ /*-----------------------------------------------------------------------------*/
+/**
+ *
+ * This function checks the 180 Error status bits for RD/WR 2D training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[out] *Result - Pointer to UINT32 for storing results
+ *
+ * @return BOOLEAN
+ * TRUE
+ *
+ */
+BOOLEAN
+MemFRdWr2DCompare180Phase (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ OUT VOID *Result
+ )
+{
+ *(UINT32*)Result = NBPtr->GetBitField (NBPtr, BFNibbleErr180Sts);
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function starts the Victim for 2D RdDqs Training Continuous Writes
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] SeedCountPtr - UINT8 Pointer to Seed count
+ *
+ * @return BOOLEAN
+ * TRUE
+ *
+ */
+BOOLEAN
+MemFRdWr2DStartVictim (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *SeedCountPtr
+ )
+{
+ BOOLEAN OptPatWr2D;
+ UINT32 CommandCount;
+ UINT8 SeedCount;
+
+ ASSERT (NBPtr != NULL);
+ ASSERT (SeedCountPtr != NULL);
+
+ SeedCount = *(UINT8*)SeedCountPtr;
+
+ OptPatWr2D = FALSE;
+ if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+ OptPatWr2D = (NBPtr->IsSupported[OptimizedPatternWrite2D]);
+ CommandCount = NBPtr->TotalBitTimes2DRdTraining / (8 * NBPtr->MaxSeedCount * NBPtr->MaxAggressorDimms[NBPtr->Dct]);
+ } else {
+ CommandCount = 256;
+ }
+
+ // Program the PRBS Seed
+ NBPtr->FamilySpecificHook[RdWr2DProgramDataPattern] (NBPtr, &SeedCount);
+ if (OptPatWr2D) {
+ //
+ // Set BankAddress according to seed
+ //
+ NBPtr->SetBitField (NBPtr, BFTgtBankA, (SeedCount * 2) + CPG_BANK_ADDRESS_A);
+ NBPtr->SetBitField (NBPtr, BFTgtBankB, (SeedCount * 2) + CPG_BANK_ADDRESS_B);
+ } else {
+ //
+ // Enable continuous writes on the victim channels
+ //
+ // Set the Command Count
+ NBPtr->SetBitField (NBPtr, BFCmdCount, 256);
+ NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_WRITE);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+ // Wait for TestStatus = 1 and CmdSendInProg = 0.
+ NBPtr->PollBitField (NBPtr, BFTestStatus, 1, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+ }
+ //
+ // Enable continuous reads on the victim channels
+ //
+ // Set the Command Count
+ ASSERT (NBPtr->MaxAggressorDimms[NBPtr->Dct] != 0);
+ //
+ NBPtr->SetBitField (NBPtr, BFCmdCount, CommandCount );
+ // Reset All Errors and Disable StopOnErr
+ NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_READ);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+ // Wait for TestStatus = 1 and CmdSendInProg = 0
+ NBPtr->PollBitField (NBPtr, BFTestStatus, 1, PCI_ACCESS_TIMEOUT, FALSE);
+ //}
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finalizes the Victim for 2D RdDqs Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *OptParam - Unused
+ *
+ * @return BOOLEAN
+ * TRUE - Success
+ */
+BOOLEAN
+MemFRdWr2DFinalizeVictim (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ UINT8 InitialCS;
+ UINT8 ChipSel;
+ InitialCS = NBPtr->TechPtr->ChipSel;
+ NBPtr->SetBitField (NBPtr, BFLfsrRollOver, 0);
+ for (ChipSel = InitialCS; ChipSel < (InitialCS + NBPtr->CsPerDelay); ChipSel++) {
+ // Ensure that Odd and Even CS are precharged
+ if ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) == 0) {
+ continue;
+ }
+ NBPtr->TechPtr->ChipSel = ChipSel;
+ // Send the Precharge All Command
+ MemNRrwPrechargeCmd (NBPtr, ChipSel, PRECHARGE_ALL_BANKS);
+ }
+ // Turn Off the RRW Engine
+ NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 0);
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs the Data Pattern that will be sent and compared
+ * against.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *PatternIndexPtr - Pointer to a generic index used to
+ * determine which pattern to program.
+ *
+ * @return BOOLEAN
+ * TRUE
+ *
+ */
+BOOLEAN
+MemFRdWr2DProgramDataPattern (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID* PatternIndexPtr
+ )
+{
+ UINT8 SeedCount;
+ UINT32 PrbsSeed;
+ CONST STATIC UINT32 PrbsSeedTbl[4] = {0x7ea05, 0x44443, 0x22b97, 0x3f167};
+ CONST STATIC UINT32 CmdStreamLenTbl[4] = {13, 61, 127, 251};
+
+ ASSERT (NBPtr != 0);
+ ASSERT (PatternIndexPtr != NULL);
+ SeedCount = *(UINT8*)PatternIndexPtr;
+ ASSERT (SeedCount <= (NBPtr->MaxSeedCount - 1));
+ //
+ // Program the Command Stream Length
+ //
+ if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+ NBPtr->SetBitField (NBPtr, BFCmdStreamLen, CmdStreamLenTbl[SeedCount]);
+ } else {
+ NBPtr->SetBitField (NBPtr, BFCmdStreamLen, 63);
+ }
+ PrbsSeed = PrbsSeedTbl[SeedCount % GET_SIZE_OF (PrbsSeedTbl)];
+ ASSERT (PrbsSeed != 0);
+ //
+ // Program the PRBS Seed
+ //
+ NBPtr->SetBitField (NBPtr, BFDataPrbsSeed, PrbsSeed);
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdWr2DTraining.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdWr2DTraining.c
new file mode 100644
index 0000000..6a9e873
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdWr2DTraining.c
@@ -0,0 +1,1368 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfRdWr2DTraining.c
+ *
+ * Common Read/Write 2D Training Feature Function
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/RdWr2DTraining)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "AdvancedApi.h"
+#include "GeneralServices.h"
+#include "heapManager.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mport.h"
+#include "merrhdl.h"
+#include "OptionMemory.h"
+#include "mfRdWr2DTraining.h"
+#include "Filecode.h"
+
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_FEAT_RDWR2DTRAINING_MFRDWR2DTRAINING_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemFRdWr2DScaleVref (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Vref
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+ extern MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initializes the 2D Read/Write Training Feature Hooks.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return BOOLEAN
+ * TRUE - Function was implemented
+ */
+
+BOOLEAN
+MemFRdWr2DTrainingInit (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ ASSERT (NBPtr != NULL);
+ NBPtr->FamilySpecificHook[RdWr2DTraining] = MemFAmdRdWr2DTraining;
+ NBPtr->FamilySpecificHook[CheckRdWr2DTrainingPerConfig] = MemFCheckRdWr2DTrainingPerConfig;
+ NBPtr->FamilySpecificHook[RdWr2DSelectIntExtVref] = MemFRdWr2DProgramIntExtVrefSelect;
+ NBPtr->FamilySpecificHook[RdWr2DProgramVref] = MemFRdWr2DProgramVref;
+ NBPtr->FamilySpecificHook[RdWr2DScaleVref] = MemFRdWr2DScaleVref;
+ NBPtr->FamilySpecificHook[RdWr2DProgramDelays] = MemFRdWr2DProgramDelays;
+ NBPtr->FamilySpecificHook[RdWr2DDataCollection] = MemFRdWr2DEyeRimSearch;
+ NBPtr->FamilySpecificHook[RdWr2DInitVictim] = MemFRdWr2DInitVictim;
+ NBPtr->FamilySpecificHook[RdWr2DInitVictimChipSel] = MemFRdWr2DInitVictimChipSel;
+ NBPtr->FamilySpecificHook[RdWr2DStartVictim] = MemFRdWr2DStartVictim;
+ NBPtr->FamilySpecificHook[RdWr2DFinalizeVictim] = MemFRdWr2DFinalizeVictim;
+ NBPtr->FamilySpecificHook[RdWr2DCompareInPhase] = MemFRdWr2DCompareInPhase;
+ NBPtr->FamilySpecificHook[RdWr2DCompare180Phase] = MemFRdWr2DCompare180Phase;
+ NBPtr->FamilySpecificHook[RdWr2DProgramDataPattern] = MemFRdWr2DProgramDataPattern;
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes 2D training for Read DQS or Write DQ
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *OptParam - Unused
+ *
+ * @return BOOLEAN
+ * TRUE - No Errors occurred
+ * FALSE - Errors occurred
+ */
+
+BOOLEAN
+MemFAmdRdWr2DTraining (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID* OptParam
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ MEM_DATA_STRUCT *MemPtr;
+ MEM_RD_WR_2D_ENTRY Data;
+ RD_WR_2D *VrefPtr;
+ PSO_TABLE *PsoTable;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ UINT8 Dct;
+ UINT8 ChipSel;
+ UINT8 Lane;
+ UINT8 Vref;
+ UINT8 MaxLanes;
+ UINT8 TmpLanes;
+ UINT8 TotalDlyRange;
+ BOOLEAN Status;
+ //
+ // Initialize Pointers
+ //
+ ASSERT (NBPtr != NULL);
+ TechPtr = NBPtr->TechPtr;
+ MemPtr = NBPtr->MemPtr;
+ PsoTable = MemPtr->ParameterListPtr->PlatformMemoryConfiguration;
+ //
+ // Set environment settings before training
+ //
+ AGESA_TESTPOINT (TpProcMem2dRdDqsTraining, &(MemPtr->StdHeader));
+ MemTBeginTraining (TechPtr);
+ //
+ // Allocate heap for the 2D RdWR/Vref Data structure
+ //
+ MaxLanes = 0;
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ TmpLanes = MemFRdWr2DGetMaxLanes (NBPtr);
+ MaxLanes = MAX (MaxLanes, TmpLanes);
+ }
+
+ AllocHeapParams.RequestedBufferSize = MaxLanes * NBPtr->TotalMaxVrefRange * sizeof (RD_WR_2D);
+ AllocHeapParams.BufferHandle = AMD_MEM_2D_RD_WR_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) == AGESA_SUCCESS) {
+ VrefPtr = (RD_WR_2D *) AllocHeapParams.BufferPtr;
+ } else {
+ SetMemError (AGESA_FATAL, NBPtr->MCTPtr);
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_2D, 0, 0, 0, 0, &MemPtr->StdHeader);
+ return TRUE;
+ }
+ for (Lane = 0; Lane < MaxLanes; Lane++) {
+ Data.Lane[Lane].Vref = &VrefPtr[Lane * NBPtr->TotalMaxVrefRange];
+ }
+ //
+ // Setup hardware training engine
+ //
+ TechPtr->TrainingType = TRN_DQS_POSITION;
+ NBPtr->FamilySpecificHook[SetupHwTrainingEngine] (NBPtr, &TechPtr->TrainingType);
+
+ Data.Vnom = NBPtr->TotalMaxVrefRange / 2; // Set Nominal Vref
+ TotalDlyRange = (TechPtr->Direction == DQS_READ_DIR) ? NBPtr->TotalRdDQSDlyRange : NBPtr->TotalWrDatDlyRange;
+ Data.MaxRdWrSweep = TotalDlyRange / 2; // Set Max Sweep Size
+ ASSERT (TotalDlyRange <= MAX_RD_WR_DLY_ENTRIES);
+ //
+ // Execute 2d Rd DQS training for all Dcts/Chipselects
+ //
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ NBPtr->Vref = 0xFF;
+ Status = FALSE;
+ if (NBPtr->FamilySpecificHook[CheckRdWr2DTrainingPerConfig] (NBPtr, NULL)) {
+ for (ChipSel = 0; ChipSel < NBPtr->CsPerChannel; ChipSel = ChipSel + NBPtr->CsPerDelay ) {
+ if ( (NBPtr->MCTPtr->Status[SbLrdimms]) ? ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0) :
+ ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) != 0) ) {
+ //
+ //Initialize storage
+ //
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ for (Vref = 0; Vref < NBPtr->TotalMaxVrefRange; Vref++) {
+ Data.Lane[Lane].Vref[Vref].PosRdWrDly = 0;
+ Data.Lane[Lane].Vref[Vref].NegRdWrDly = 0;
+ }
+ }
+ TechPtr->ChipSel = ChipSel;
+ IDS_HDT_CONSOLE (MEM_FLOW,"\tChip Select: %02x \n", TechPtr->ChipSel);
+ //
+ // 1. Sample the data eyes for each channel:
+ //
+ TechPtr->RdWr2DData = &Data;
+ if (NBPtr->FamilySpecificHook[RdWr2DDataCollection] (NBPtr, NULL)) {
+ //
+ // 2. Process the array of results with a diamond convolution mask, summing the number passing sample points.
+ //
+ // Determine Diamond Mask Height
+ if (MemFRdWr2DHeight (NBPtr, &Data)) {
+ //
+ // Apply Mask
+ //
+ if (MemFRdWr2DApplyMask (NBPtr, &Data)) {
+ //
+ // Convolution
+ //
+ if (MemFRdWr2DProcessConvolution (NBPtr, &Data)) {
+ //
+ // 3. Program the final DQS delay values.
+ //
+ if (MemFRdWr2DProgramMaxDelays (NBPtr, &Data)) {
+ //
+ // Find the Smallest Positive or Negative Margin for current CS
+ //
+ if (MemFRdWr2DFindCsVrefMargin (NBPtr, &Data)) {
+ Status = TRUE;
+ }
+ }
+ }
+ }
+ }
+ }
+ if (Status == FALSE) {
+ SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+ PutEventLog (AGESA_ERROR, (TechPtr->Direction == DQS_READ_DIR) ? MEM_ERROR_2D_DQS_ERROR : MEM_ERROR_2D_WRDAT_ERROR, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ }
+ }
+ }
+ //
+ // Find the Max and Min Vref values for each DCT
+ //
+ if (Status == TRUE) {
+ if (MemFRdWr2DFinalVrefMargin (NBPtr, &Data)) {
+ //
+ // Program the Max Vref value
+ //
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tProgramming Final Vref for channel\n");
+ NBPtr->FamilySpecificHook[RdWr2DProgramVref] (NBPtr, &NBPtr->ChannelPtr->MaxVref);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tActual Vref programmed = %02x\n",
+ ( NBPtr->GetBitField (NBPtr, BFVrefDAC) >> TSEFO_END (NBPtr->NBRegTable[BFVrefDAC])) );
+ Status = TRUE;
+ } else {
+ SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+ PutEventLog (AGESA_ERROR, (TechPtr->Direction == DQS_READ_DIR) ? MEM_ERROR_2D_DQS_VREF_MARGIN_ERROR: MEM_ERROR_2D_WRDAT_VREF_MARGIN_ERROR, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ }
+ }
+ }
+ }
+ //
+ // Restore environment settings after training
+ //
+ if (HeapDeallocateBuffer (AMD_MEM_2D_RD_WR_HANDLE, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+ SetMemError (AGESA_FATAL, NBPtr->MCTPtr);
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_DEALLOCATE_FOR_2D, 0, 0, 0, 0, &MemPtr->StdHeader);
+ }
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tEnd\n");
+ MemTEndTraining (TechPtr);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\nEnd %s 2D training\n\n",(TechPtr->Direction == DQS_READ_DIR) ? "Read DQS":"Write DQ");
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determines whether the current configuration is a valid
+ * config for applying 2D Training
+ * @todo: Update to work for 2D WR and 2D RD training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *OptParam - Unused
+ *
+ * @return BOOLEAN
+ * TRUE - Configuration valid
+ * FALSE - Configuration invalid
+ *
+ */
+BOOLEAN
+MemFCheckRdWr2DTrainingPerConfig (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ UINT8 i;
+ if (NBPtr->RefPtr->ForceTrainMode == FORCE_TRAIN_AUTO) {
+ i = 0;
+ while (memPlatSpecFlowArray[i] != NULL) {
+ if ((memPlatSpecFlowArray[i])->S2D (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ return TRUE;
+ }
+ i++;
+ }
+ }
+ return FALSE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determines the maximum number of lanes for puposes of 2D
+ * Read or Write training.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return UINT8 - Max Number of Lanes
+ *
+ */
+UINT8
+MemFRdWr2DGetMaxLanes (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ UINT8 MaxLanes;
+
+ TechPtr = NBPtr->TechPtr;
+ if ((TechPtr->Direction == DQS_READ_DIR) && ((NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (TechPtr->ChipSel >> 1))) != 0)) {
+ // Per Nibble
+ MaxLanes = (NBPtr->MCTPtr->Status[SbEccDimms] && (NBPtr->IsSupported[EccByteTraining] == TRUE)) ? 18 : 16;
+ } else {
+ // Per Byte
+ MaxLanes = (NBPtr->MCTPtr->Status[SbEccDimms] && (NBPtr->IsSupported[EccByteTraining] == TRUE)) ? 9 : 8;
+ }
+ return MaxLanes;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs Vref to internal or external control for 2D Read
+ * or Write Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *OptParam - Unused
+ *
+ * @return BOOLEAN
+ * TRUE - External Vref was selected
+ * FALSE - Internal Vref was selected
+ *
+ */
+BOOLEAN
+MemFRdWr2DProgramIntExtVrefSelect (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+ NBPtr->SetBitField (NBPtr, BFVrefSel, (NBPtr->RefPtr->ExternalVrefCtl ? 0x0000 : 0x0001));
+ }
+ return NBPtr->RefPtr->ExternalVrefCtl;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function scales Vref from the range used in Data Collection to
+ * the range that is programmed into the register.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *Vref - Pointer to UINT8 Vref Value to scale.
+ *
+ * @return BOOLEAN
+ * TRUE Function was implemented
+ *
+ */
+BOOLEAN
+STATIC
+MemFRdWr2DScaleVref (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Vref
+ )
+{
+ *(UINT8*)Vref = *(UINT8*)Vref * 2;
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs Vref for 2D Read/Write Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *VrefPtr - Pointer to Vref value
+ *
+ * @return BOOLEAN
+ * TRUE - Success
+ * FAIL (External Callout only)
+ *
+ */
+BOOLEAN
+MemFRdWr2DProgramVref (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *VrefPtr
+ )
+{
+ AGESA_STATUS Status;
+ MEM_DATA_STRUCT *MemPtr;
+ ID_INFO CallOutIdInfo;
+ VOLTAGE_ADJUST Va;
+ UINT8 Vref;
+
+ ASSERT (NBPtr != NULL);
+ ASSERT (VrefPtr != NULL);
+ MemPtr = NBPtr->MemPtr;
+ Vref = *(UINT8*)VrefPtr;
+ CallOutIdInfo.IdField.SocketId = NBPtr->MCTPtr->SocketId;
+ CallOutIdInfo.IdField.ModuleId = NBPtr->MCTPtr->DieId;
+ LibAmdMemCopy ((VOID *)&Va, (VOID *)MemPtr, (UINTN)sizeof (Va.StdHeader), &MemPtr->StdHeader);
+ Va.MemData = MemPtr;
+ Status = AGESA_SUCCESS;
+ if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+ if (NBPtr->RefPtr->ExternalVrefCtl == FALSE) {
+ //
+ // Internal vref control
+ //
+ // This is 1/2 VrefDAC value Sign bit is shifted into place.
+ //
+ ASSERT (Vref < 32);
+ if (Vref < 15) {
+ Vref = (31 - Vref) << 1;
+ } else {
+ Vref = (Vref - 15) << 1;
+ }
+ NBPtr->SetBitField (NBPtr, BFVrefDAC, Vref << 2);
+ } else {
+ // External vref control
+ AGESA_TESTPOINT (TpProcMemBefore2dTrainExtVrefChange, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->MemPtr->ParameterListPtr->ExternalVrefValue = Vref;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n2D Read Training External CPU Vref Callout \n");
+ Va.VoltageType = VTYPE_CPU_VREF;
+ Va.AdjustValue = Vref = (Vref - 15) << 1;
+ Status = AgesaExternalVoltageAdjust ((UINTN)CallOutIdInfo.IdInformation, &Va);
+ AGESA_TESTPOINT (TpProcMemAfter2dTrainExtVrefChange, &(NBPtr->MemPtr->StdHeader));
+ }
+ } else {
+ //
+ // DIMM Vref Control
+ //
+ Va.VoltageType = VTYPE_DIMM_VREF;
+ //
+ // Offset by 15 and multiply by 2.
+ //
+ Va.AdjustValue = Vref = (Vref - 15) << 1;
+ Status = AgesaExternalVoltageAdjust ((UINTN)CallOutIdInfo.IdInformation, &Va);
+ if (Status != AGESA_SUCCESS) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "* Dimm Vref Callout Failed *");
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ }
+ return (Status == AGESA_SUCCESS) ? TRUE : FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs Read DQS or Write DQ Delay values for Read/Write
+ * Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Delay - Pointer to UINT8 containing Delay value
+ *
+ * @return BOOLEAN
+ * TRUE
+ *
+ */
+
+BOOLEAN
+MemFRdWr2DProgramDelays (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *Delay
+ )
+{
+ UINT32 RdDqsTime;
+ UINT8 RdWrDly;
+
+ ASSERT (NBPtr != 0);
+ ASSERT (Delay != 0);
+ RdWrDly = *(UINT8*) Delay;
+ if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+ // This function should only be used for read training
+ ASSERT (NBPtr->TechPtr->Direction == DQS_READ_DIR);
+ // Program BL registers for both nibble (x4) and bytes (x8, x16)
+ RdDqsTime = 0;
+ RdDqsTime = (RdWrDly & 0x1F) << 8;
+ RdDqsTime = RdDqsTime | (RdWrDly & 0x1F);
+ if ((NBPtr->TechPtr->ChipSel / NBPtr->CsPerDelay) == 0) {
+ NBPtr->SetBitField (NBPtr, BFDataByteRxDqsDLLDimm0Broadcast, RdDqsTime);
+ } else if ((NBPtr->TechPtr->ChipSel / NBPtr->CsPerDelay) == 1) {
+ NBPtr->SetBitField (NBPtr, BFDataByteRxDqsDLLDimm1Broadcast, RdDqsTime);
+ } else if ((NBPtr->TechPtr->ChipSel / NBPtr->CsPerDelay) == 2) {
+ NBPtr->SetBitField (NBPtr, BFDataByteRxDqsDLLDimm2Broadcast, RdDqsTime);
+ } else if ((NBPtr->TechPtr->ChipSel / NBPtr->CsPerDelay) == 3) {
+ NBPtr->SetBitField (NBPtr, BFDataByteRxDqsDLLDimm3Broadcast, RdDqsTime);
+ }
+ } else {
+ MemTSetDQSDelayAllCSR (NBPtr->TechPtr, RdWrDly);
+ }
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function stores data for 2D Read DQS and Write DQ Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ * @param[in] *InPhaseResult[] - Array of inphase results
+ * @param[in] *PhaseResult180[] - Array of Phase 180 results
+ *
+ * @return BOOLEAN
+ * TRUE - No Errors occurred
+ * FALSE - Errors ccurred
+ */
+VOID
+MemFRdWr2DStoreResult (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data,
+ IN UINT32 InPhaseResult[],
+ IN UINT32 PhaseResult180[]
+ )
+{
+ UINT8 Lane;
+ UINT8 Vref;
+ UINT8 RdWrDly;
+ UINT32 Result;
+ UINT32 Result180;
+ UINT8 Index;
+ Vref = NBPtr->Vref;
+ RdWrDly = Data->RdWrDly;
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ for (RdWrDly = 0; RdWrDly < Data->MaxRdWrSweep; RdWrDly++) {
+ if ((NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (NBPtr->TechPtr->ChipSel >> 1))) == 0) {
+ // x8, so combine "Nibble X" and "Nibble X+1" results
+ Index = Lane * 2;
+ Result = (InPhaseResult[RdWrDly] >> Index) & 0x03;
+ Result180 = (PhaseResult180[RdWrDly] >> Index) & 0x03;
+ } else {
+ // x4, so use "Nibble" results
+ Result = (InPhaseResult[RdWrDly] >> Lane) & 0x01;
+ Result180 = (PhaseResult180[RdWrDly] >> Lane) & 0x01;
+ }
+ Data->Lane[Lane].Vref[Vref].PosRdWrDly |= (Result == 0) ? (1 << (Data->MaxRdWrSweep - 1 - RdWrDly)) : 0;
+ Data->Lane[Lane].Vref[Vref].NegRdWrDly |= (Result180 == 0) ? (1 << (Data->MaxRdWrSweep - 1 - RdWrDly)) : 0;
+ }
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determines the height of data for 2D Read and Write training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return BOOLEAN
+ * TRUE - No Errors occurred
+ */
+BOOLEAN
+MemFRdWr2DHeight (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ )
+{
+ UINT8 Lane;
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ Data->Lane[Lane].HalfDiamondHeight = 0x0F;
+ }
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t Lane: ");
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", Lane);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tHeight: ");
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", (2*(Data->Lane[Lane].HalfDiamondHeight) + 1));
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ );
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets the width for 2D RdDQS and WrDat training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return UINT8 Width
+ */
+UINT8
+MemFGetRdWr2DWidth (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ )
+{
+ if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+ return NBPtr->DiamondWidthRd;
+ } else {
+ return NBPtr->DiamondWidthWr;
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets the step height for the diamond mask for 2D RdDQS or
+ * WrDat Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ * @param[in] Vref - current Vref value
+ * @param[in] Lane - current Lane
+ *
+ * @return BOOLEAN
+ * TRUE - Step found and value should be updated
+ * FALSE - Step not found and value should not be updated
+ *
+ */
+BOOLEAN
+MemFCheckRdWr2DDiamondMaskStep (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data,
+ IN UINT8 Vref,
+ IN UINT8 Lane
+ )
+{
+ UINT8 M;
+ UINT8 VrefVal;
+ UINT8 width;
+ UINT8 i;
+ BOOLEAN status;
+ // m = -1 * height/width
+ // (y-b)/m = x
+ status = FALSE;
+ if (Vref > (Data->Vnom - 1)) {
+ VrefVal = (Vref + 1) - Data->Vnom;
+ } else {
+ VrefVal = Vref;
+ }
+ width = (MemFGetRdWr2DWidth (NBPtr, Data) - 1) / 2;
+ M = Data->Lane[Lane].HalfDiamondHeight / width;
+ i = 1;
+ while (i <= Data->Lane[Lane].HalfDiamondHeight) {
+ i = i + M;
+ if (VrefVal == i) {
+ status = TRUE;
+ }
+ }
+ return status;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function applies a mask for 2D RdDQS or WrDat training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return BOOLEAN
+ * TRUE - No Errors occurred
+ * FALSE - Errors ccurred
+ *
+ */
+BOOLEAN
+MemFRdWr2DApplyMask (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ UINT8 RdWrDly;
+ UINT8 Lane;
+ UINT8 Height;
+ UINT8 Width;
+ UINT32 PosNegData;
+ UINT8 Vref;
+ UINT8 count;
+ UINT8 Dly;
+ UINT8 endWidth;
+ UINT8 startWidth;
+ UINT8 origEndWidth;
+ UINT8 origStartWidth;
+ UINT8 maxOverLapWidth;
+ UINT8 startOverLapWidth;
+ UINT8 TotalDlyRange;
+ BOOLEAN maxHeightExceeded;
+ BOOLEAN negVrefComplete;
+ BOOLEAN PosRdWrToNegRdWr;
+ BOOLEAN NegRdWrToPosRdWr;
+
+ TechPtr = NBPtr->TechPtr;
+ TotalDlyRange = (TechPtr->Direction == DQS_READ_DIR) ? NBPtr->TotalRdDQSDlyRange : NBPtr->TotalWrDatDlyRange;
+ //
+ // Initialize Convolution
+ //
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ for (RdWrDly = 0; RdWrDly < TotalDlyRange; RdWrDly++) {
+ Data->Lane[Lane].Convolution[RdWrDly] = 0;
+ NBPtr->FamilySpecificHook[Adjust2DDelayStepSize] (NBPtr, &RdWrDly);
+ }
+ }
+ endWidth = 0;
+ startWidth = 0;
+ origEndWidth = 0;
+ origStartWidth = 0;
+ startOverLapWidth = 0;
+ maxOverLapWidth = 0;
+ maxHeightExceeded = FALSE;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tDetermining Width");
+ //
+ // Get the Width of Diamond
+ //
+ Width = MemFGetRdWr2DWidth (NBPtr, Data);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tWidth: %02x\n", Width);
+ ASSERT (Width != 0);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tExecuting convolution function\n");
+ //
+ // Perform the convolution by sweeping the mask function centered at nominal Vref. Results in a one
+ // dimensional array with FOM values at each delay for each lane. Choose the delay setting at the peak
+ // FOM value.
+ //
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ Height = Data->Lane[Lane].HalfDiamondHeight;
+ ASSERT (Height < Data->Vnom);
+ //
+ // RdWrDly is divided around "Data->MaxRdWrSweep" into positive and negative directions
+ // Positive direction -> RdWrDly = 0 to (Data->MaxRdWrSweep - 1)
+ // Negative direction -> RdWrDly = Data->MaxRdWrSweep to (TotalDlyRange - 1)
+ //
+ for (RdWrDly = 0; RdWrDly < TotalDlyRange; RdWrDly++) {
+ // Vref loop is divided around "Data->Vnom - 1" into positive and negative directions
+ // Negative direction -> Vref = 0 ("Data->Vnom - 1") to Height("Data->Vnom - 1" - Height)
+ // Positive direction -> Vref = "Data->Vnom" to Height("Data->Vnom" + Height)
+ //
+ negVrefComplete = FALSE;
+ PosRdWrToNegRdWr = FALSE;
+ NegRdWrToPosRdWr = FALSE;
+ for (Vref = 0; Vref < (NBPtr->TotalMaxVrefRange - 1); Vref++) {
+ // Initial negative direction where Vref = 0 ("Data->Vnom - 1"), so we need to set
+ // initial startWidth and endWidth for +/- RdDqs
+ //
+ // Create common delay based on +/- RdDqs
+ if (RdWrDly > (Data->MaxRdWrSweep - 1)) {
+ Dly = RdWrDly - Data->MaxRdWrSweep;
+ } else {
+ Dly = RdWrDly;
+ }
+ if (Vref == 0 ) {
+ // Initialize -Vref
+ maxHeightExceeded = FALSE; // reset for start of -Vref
+ // Case 1: if +RdDqs - Check for lower bound (Width/2 > RdDqs > 0)
+ // : if -RdDqs - Check for lower bound (Width/2 + Data->MaxRdDqsSweep > RdDqs > Data->MaxRdDqsSweep)
+ if (Dly < Width / 2) {
+ endWidth = Dly + Width / 2 + 1;
+ startWidth = 0;
+ } else if ((Dly + Width / 2) > (Data->MaxRdWrSweep - 1)) {
+ // Case 2: if +RdWr - Check for upper bound ((Data->MaxRdWrSweep - 1) < RdWr < ((Data->MaxRdWrSweep - 1) - Width/2))
+ // : if -RdWr - Check for lower bound ((DatNBPtr->TotalRdWrDlyRange - 1) < RdWr < ((NBPtr->TotalRdWrDlyRange - 1) - Width/2))
+ endWidth = Data->MaxRdWrSweep;
+ startWidth = Dly - Width / 2;
+ } else {
+ // Set the initial "startWidth" and "endWidth" for +/- RdDqs
+ endWidth = Dly + Width / 2 + 1;
+ startWidth = Dly - Width / 2;
+ }
+ origEndWidth = endWidth;
+ origStartWidth = startWidth;
+ } else if (Vref == Data->Vnom) {
+ // Initialize +Vref
+ endWidth = origEndWidth;
+ startWidth = origStartWidth;
+ maxHeightExceeded = FALSE; // reset for start of +Vref
+ negVrefComplete = TRUE;
+ } else if ((Vref > (Data->Vnom + Height)) && negVrefComplete == TRUE) {
+ break; //switch to next RdDqs Dly if height exceeded for +vref and -vref complete
+ } else {
+ if (startWidth >= endWidth) {
+ if (RdWrDly == (TotalDlyRange - 1)) {
+ // Special condition for end of -RdDqs range
+ startWidth = Data->MaxRdWrSweep - 1;
+ endWidth = Data->MaxRdWrSweep;
+ } else {
+ // Width = 0, but Height not reached,
+ startWidth = Dly;
+ endWidth = Dly + 1;
+ }
+ } else {
+ // Check for Case 1 and Case 2 above
+ if ((RdWrDly + Width / 2) > (TotalDlyRange - 1)) {
+ endWidth = origEndWidth;
+ }
+ }
+ maxHeightExceeded = FALSE;
+ }
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ if (Lane == 0) {
+ if (RdWrDly == (Data->MaxRdWrSweep - (Width / 2)) ) {
+ Data->DiamondLeft[Vref] = startWidth;
+ Data->DiamondRight[Vref] = endWidth - 1;
+ }
+ }
+ );
+ //
+ // Determine the correct Delay (+/-) and Vref (+/-)direction
+ //
+ if (maxHeightExceeded == FALSE) {
+ if (RdWrDly < Data->MaxRdWrSweep) {
+ if (Vref > (Data->Vnom - 1)) {
+ PosNegData = Data->Lane[Lane].Vref[Vref].PosRdWrDly; // +RdWr Dly, +Vref
+ } else {
+ PosNegData = Data->Lane[Lane].Vref[(Data->Vnom - 1) - Vref].PosRdWrDly; // +RdDqs Dly, -Vref
+ }
+ } else {
+ if (Vref > (Data->Vnom - 1)) {
+ PosNegData = Data->Lane[Lane].Vref[Vref].NegRdWrDly; // -RdWr Dly, +Vref
+ } else {
+ PosNegData = Data->Lane[Lane].Vref[(Data->Vnom - 1) - Vref].NegRdWrDly; // -RdWr Dly, -Vref
+ }
+ }
+ //
+ // Case 1: Non-overlap condition:
+ // Count the number of passes from "startWidth" to "endWidth"
+ //
+ for (count = startWidth; count < endWidth; count++) {
+ Data->Lane[Lane].Convolution[RdWrDly] = (UINT8) ((PosNegData >> count) & 0x1) + Data->Lane[Lane].Convolution[RdWrDly];
+ }
+ // Case 2: Overlay between +RdWr and -RdWr starting from +RdWr
+ // Count the number of passes from "startWidth" to "endWidth"
+ //
+ if ((RdWrDly <= (Data->MaxRdWrSweep - 1) && (RdWrDly > ((Data->MaxRdWrSweep - 1) - Width / 2)))) {
+ startOverLapWidth = 0;
+ if (Vref == 0 || Vref == Data->Vnom) {
+ maxOverLapWidth = (RdWrDly + Width / 2) - (Data->MaxRdWrSweep - 1); // Initial overlap max width size
+ } else if (maxOverLapWidth == 0) {
+ maxOverLapWidth = startOverLapWidth; // Stop counting after overlap region complete
+ }
+ // Ensure that +/- vref is set correctly
+ if (Vref > (Data->Vnom - 1)) {
+ PosNegData = Data->Lane[Lane].Vref[Vref].NegRdWrDly;
+ } else {
+ PosNegData = Data->Lane[Lane].Vref[(Data->Vnom - 1) - Vref].NegRdWrDly;
+ }
+ // Need to count the number of passes when range extends from Pos RdDqs to Neg RdDqs
+ for (count = startOverLapWidth; count < maxOverLapWidth; count++) {
+ Data->Lane[Lane].Convolution[RdWrDly] = (UINT8) ((PosNegData >> count) & 0x1) + Data->Lane[Lane].Convolution[RdWrDly];
+ }
+ if (maxOverLapWidth > 0) {
+ if (MemFCheckRdWr2DDiamondMaskStep (NBPtr, Data, Vref, Lane) || (Vref == 1) || (Vref == Data->Vnom)) {
+ maxOverLapWidth--; // Reduce overlap width outside of diamond mask
+ }
+ PosRdWrToNegRdWr = TRUE;
+ }
+ }
+ if (((RdWrDly - Data->MaxRdWrSweep) < Width / 2) && (RdWrDly > (Data->MaxRdWrSweep - 1))) {
+ //
+ // Case 3: Overlay between -RdDqs and +RdDqs starting from -RdDqs
+ // Count the number of passes from "startWidth" to "endWidth"
+ //
+ maxOverLapWidth = Data->MaxRdWrSweep;
+ if (Vref == 0 || Vref == Data->Vnom) {
+ startOverLapWidth = RdWrDly - Width / 2; // Initial overlap start point
+ } else if (startOverLapWidth > maxOverLapWidth) {
+ maxOverLapWidth = maxOverLapWidth - 1; // Continue to count until MaxHeight excceded
+ }
+ // Ensure that vref + or - is set correctly
+ if (Vref > (Data->Vnom - 1)) {
+ PosNegData = Data->Lane[Lane].Vref[Vref].PosRdWrDly;
+ } else {
+ PosNegData = Data->Lane[Lane].Vref[(Data->Vnom - 1) - Vref].PosRdWrDly;
+ }
+ // Need to count the number of passes when range extends from Pos RdDqs to Neg RdDqs
+ for (count = startOverLapWidth; count < maxOverLapWidth; count++) {
+ Data->Lane[Lane].Convolution[RdWrDly] = (UINT8) ((PosNegData >> count) & 0x1) + Data->Lane[Lane].Convolution[RdWrDly];
+ }
+ if (startOverLapWidth < maxOverLapWidth) {
+ if (MemFCheckRdWr2DDiamondMaskStep (NBPtr, Data, Vref, Lane) || (Vref == 1) || (Vref == Data->Vnom)) {
+ startOverLapWidth++; // Reduce overlap width outside of diamond mask
+ }
+ NegRdWrToPosRdWr = TRUE;
+ }
+ }
+ }
+ if (MemFCheckRdWr2DDiamondMaskStep (NBPtr, Data, Vref, Lane) || (Vref == 1) || (Vref == Data->Vnom)) {
+ if (PosRdWrToNegRdWr) {
+ startWidth++;
+ endWidth = Data->MaxRdWrSweep;
+ PosRdWrToNegRdWr = FALSE;
+ } else if (NegRdWrToPosRdWr) {
+ startWidth = 0;
+ endWidth--;
+ NegRdWrToPosRdWr = FALSE;
+ } else {
+ startWidth++;
+ endWidth--;
+ }
+ }
+ NBPtr->FamilySpecificHook[Adjust2DVrefStepSize] (NBPtr, &Vref);
+ }
+ NBPtr->FamilySpecificHook[Adjust2DDelayStepSize] (NBPtr, &RdWrDly);
+ }
+ }
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t Diamond Shape: \n");
+ for (Vref = 0; Vref < (NBPtr->TotalMaxVrefRange - 1); Vref++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ for (RdWrDly = (Data->MaxRdWrSweep - Width); RdWrDly < Data->MaxRdWrSweep; RdWrDly++) {
+ if (Vref < (Data->Vnom - 1)) {
+ if (RdWrDly == Data->DiamondLeft[(NBPtr->TotalMaxVrefRange - 2) - Vref]) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " | ");
+ } else if (RdWrDly == Data->DiamondRight[(NBPtr->TotalMaxVrefRange - 2) - Vref]) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " | -> Width = %02x", (Data->DiamondRight[(NBPtr->TotalMaxVrefRange - 2) - Vref]) - (Data->DiamondLeft[(NBPtr->TotalMaxVrefRange - 2) - Vref]));
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, " ");
+ }
+ } else {
+ if (RdWrDly == Data->DiamondLeft[Vref - (Data->Vnom - 1)]) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " | ");
+ } else if (RdWrDly == Data->DiamondRight[Vref - (Data->Vnom - 1)]) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " | -> Width = %02x", (Data->DiamondRight[Vref - (Data->Vnom - 1)]) - (Data->DiamondLeft[Vref - (Data->Vnom - 1)]));
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, " ");
+ }
+ }
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t Convolution results after processing raw data:\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t Delay: ");
+ for (RdWrDly = 0; RdWrDly < TotalDlyRange; RdWrDly++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %02x ", RdWrDly <= (Data->MaxRdWrSweep - 1) ? (Data->MaxRdWrSweep - 1) - RdWrDly : (TotalDlyRange - 1) - RdWrDly);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tLane: %02x\n", Lane);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tConv: ");
+ for (RdWrDly = 0; RdWrDly < TotalDlyRange; RdWrDly++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", Data->Lane[Lane].Convolution[RdWrDly]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ }
+ );
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function Examines the convolution function and determines the Max Delay
+ * for 2D RdDQS and WrDat training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return BOOLEAN
+ * TRUE - No Errors occurred
+ * FALSE - Errors ccurred
+ */
+
+BOOLEAN
+MemFRdWr2DProcessConvolution (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ UINT8 RdWrDly;
+ UINT8 Lane;
+ UINT16 MaxFOM;
+ UINT8 MaxRange;
+ UINT8 CurrRange;
+ UINT8 TotalDlyRange;
+ BOOLEAN status;
+
+ ASSERT (NBPtr != NULL);
+ TechPtr = NBPtr->TechPtr;
+ TotalDlyRange = (TechPtr->Direction == DQS_READ_DIR) ? NBPtr->TotalRdDQSDlyRange : NBPtr->TotalWrDatDlyRange;
+ status = TRUE;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tDetermining Delay based on Convolution function\n");
+ // Determine the Max RdDqs or WrDat Dly for the convolution function
+ // - Choose the delay setting at the peak FOM value.
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ // Find largest value as MaxFOM
+ MaxFOM = 0;
+ for (RdWrDly = 0; RdWrDly < TotalDlyRange; RdWrDly++) {
+ if (Data->Lane[Lane].Convolution[RdWrDly] > MaxFOM) {
+ MaxFOM = Data->Lane[Lane].Convolution[RdWrDly];
+ }
+ }
+ status = MaxFOM > 0 ? TRUE : FALSE; // It is an error if all convolution points are zero
+
+ // Then find the midpoint of the largest consecutive window w/ that MaxFOM
+ // In cases of an even number of consecutive points w/ that MaxFOM exists,
+ // choose the midpoint to the right
+ // All things being equal, favor the right side of a bi-modal eye
+ // Stressful SSO patterns shift the eye right!
+ MaxRange = 0;
+ CurrRange = 0;
+ for (RdWrDly = 0; (MaxFOM > 0) && RdWrDly < TotalDlyRange; RdWrDly++) {
+ if (Data->Lane[Lane].Convolution[RdWrDly] == MaxFOM) {
+ CurrRange++;
+ if (CurrRange >= MaxRange) {
+ Data->Lane[Lane].MaxRdWrDly = RdWrDly - ((CurrRange - 1) / 2);
+ MaxRange = CurrRange;
+ }
+ } else {
+ CurrRange = 0;
+ }
+ }
+
+ if (Data->Lane[Lane].MaxRdWrDly > Data->MaxRdWrSweep) {
+ status = FALSE; // Error
+ }
+ // Set Actual register value
+ if (Data->Lane[Lane].MaxRdWrDly < Data->MaxRdWrSweep) {
+ Data->Lane[Lane].MaxRdWrDly = (Data->MaxRdWrSweep - 1) - Data->Lane[Lane].MaxRdWrDly;
+ } else {
+ status = FALSE; // Error
+ }
+ }
+
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Cs %d Lane: ", TechPtr->ChipSel);
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", Lane);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t Max %s Delay: ", TechPtr->Direction == DQS_READ_DIR ? "Rd Dqs" : "Wr DQ");
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", Data->Lane[Lane].MaxRdWrDly);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t1D Trained %s Delay: ", TechPtr->Direction == DQS_READ_DIR ? "Rd Dqs" : "Wr DQ");
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ if (TechPtr->Direction == DQS_READ_DIR) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", NBPtr->ChannelPtr->RdDqsDlys[(TechPtr->ChipSel / NBPtr->CsPerDelay) * MAX_DELAYS + Lane]);
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", (NBPtr->ChannelPtr->WrDatDlys[(TechPtr->ChipSel / NBPtr->CsPerDelay) * MAX_DELAYS + Lane] - \
+ NBPtr->ChannelPtr->WrDqsDlys[(TechPtr->ChipSel / NBPtr->CsPerDelay) * MAX_DELAYS + Lane]));
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ );
+
+ if (status == FALSE) {
+ SetMemError (AGESA_FATAL, NBPtr->MCTPtr);
+ PutEventLog (AGESA_FATAL, MEM_ERROR_INVALID_2D_RDDQS_VALUE, 0, 0, 0, 0, &TechPtr->NBPtr->MemPtr->StdHeader);
+ }
+ return status;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs the Max Rd Dqs or Max Wr DQ for 2D training from
+ * convolution
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return BOOLEAN
+ * TRUE - No Errors occurred
+ * FALSE - Errors ccurred
+ */
+BOOLEAN
+MemFRdWr2DProgramMaxDelays (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ UINT8 Lane;
+ UINT8 LaneHighRdDqs2dDlys;
+ UINT8 LaneLowRdDqs2dDlys;
+ UINT8 MaxWrDatDly;
+ TechPtr = NBPtr->TechPtr;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tProgramming Max %s Delay per Lane\n\n", TechPtr->Direction == DQS_READ_DIR ? "Rd Dqs" : "Wr DQ");
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ if ( TechPtr->Direction == DQS_WRITE_DIR || (NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (TechPtr->ChipSel >> 1))) == 0) {
+ // Program Byte based for x8 and x16
+ if ( TechPtr->Direction == DQS_READ_DIR) {
+ //
+ // Read DQS Training
+ //
+ NBPtr->SetTrainDly (NBPtr, AccessRdDqsDly, DIMM_BYTE_ACCESS ((TechPtr->ChipSel / NBPtr->CsPerDelay), Lane), (UINT16)Data->Lane[Lane].MaxRdWrDly);
+ NBPtr->ChannelPtr->RdDqsDlys[(TechPtr->ChipSel / NBPtr->CsPerDelay) * MAX_DELAYS + Lane] = Data->Lane[Lane].MaxRdWrDly;
+ } else {
+ //
+ // Write DQ Training
+ //
+ MaxWrDatDly = (UINT8) (Data->Lane[Lane].MaxRdWrDly + TechPtr->NBPtr->ChannelPtr->WrDqsDlys[(TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) * MAX_DELAYS + Lane]);
+ NBPtr->SetTrainDly (NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS ((TechPtr->ChipSel / NBPtr->CsPerDelay), Lane), MaxWrDatDly);
+ NBPtr->ChannelPtr->WrDatDlys[(TechPtr->ChipSel / NBPtr->CsPerDelay) * MAX_DELAYS + Lane] = MaxWrDatDly;
+ }
+ } else {
+ ASSERT (TechPtr->Direction == DQS_READ_DIR);
+ // Program nibble based x4, so use "Nibble"
+ NBPtr->SetTrainDly (NBPtr, AccessRdDqs2dDly, DIMM_NBBL_ACCESS ((TechPtr->ChipSel / NBPtr->CsPerDelay), Lane), (UINT16)Data->Lane[Lane].MaxRdWrDly);
+ NBPtr->ChannelPtr->RdDqs2dDlys[(TechPtr->ChipSel / NBPtr->CsPerDelay) * MAX_NUMBER_LANES + Lane] = Data->Lane[Lane].MaxRdWrDly;
+ // For each pair of nibbles (high (Odd Nibble) and Low (Even nibble)), find the largest and use that as the RdDqsDly value
+ if ((Lane & 0x1) == 0) {
+ LaneHighRdDqs2dDlys = Data->Lane[Lane + 1].MaxRdWrDly;
+ LaneLowRdDqs2dDlys = Data->Lane[Lane].MaxRdWrDly;
+ if (LaneHighRdDqs2dDlys > LaneLowRdDqs2dDlys) {
+ NBPtr->ChannelPtr->RdDqsDlys[(TechPtr->ChipSel / NBPtr->CsPerDelay) * MAX_DELAYS + (Lane >> 1)] = LaneHighRdDqs2dDlys;
+ } else {
+ NBPtr->ChannelPtr->RdDqsDlys[(TechPtr->ChipSel / NBPtr->CsPerDelay) * MAX_DELAYS + (Lane >> 1)] = LaneLowRdDqs2dDlys;
+ }
+ }
+ NBPtr->DctCachePtr->Is2Dx4 = TRUE;
+ }
+ }
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finds the Positive and negative Vref Margin for the current CS
+ * for 2D RdDQS or WrDat training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return BOOLEAN
+ * TRUE - No Errors occurred
+ * FALSE - Errors ccurred
+ */
+BOOLEAN
+MemFRdWr2DFindCsVrefMargin (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ )
+{
+ UINT8 SmallestMaxVrefNeg;
+ UINT8 Lane;
+ UINT8 RdWrDly;
+ UINT8 Vref;
+ UINT8 MaxVrefPositive;
+ UINT8 MaxVrefNegative;
+ UINT8 SmallestMaxVrefPos;
+ UINT32 PosNegData;
+ SmallestMaxVrefPos = 0xFF;
+ SmallestMaxVrefNeg = 0;
+ MaxVrefPositive = 0;
+ MaxVrefNegative = 0xFF;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFinding Smallest Max Positive and Negative Vref\n\n");
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ RdWrDly = (Data->MaxRdWrSweep - 1) - Data->Lane[Lane].MaxRdWrDly;
+ for (Vref = 0; Vref < (Data->Vnom - 1); Vref++) {
+ // Neg Vref - (searching from top of array down)
+ PosNegData = Data->Lane[Lane].Vref[Vref].PosRdWrDly;
+ if ((UINT8) ((PosNegData >> RdWrDly) & 0x1) == 1) {
+ MaxVrefNegative = Vref;
+ break;
+ }
+ NBPtr->FamilySpecificHook[Adjust2DVrefStepSize] (NBPtr, &Vref);
+ }
+ for (Vref = (Data->Vnom - 1); Vref < (NBPtr->TotalMaxVrefRange - 1); Vref++) {
+ // Pos Vref - (searching from Vnom + 1 of array down)
+ PosNegData = Data->Lane[Lane].Vref[Vref].PosRdWrDly;
+ if ((UINT8) ((PosNegData >> RdWrDly) & 0x1) == 0) {
+ // Convert to register setting
+ MaxVrefPositive = Vref - 1;// - Data->Vnom;
+ break;
+ } else {
+ // If Vref = 1F passes, then smallest Vref = 0x1F
+ if (Vref == ((NBPtr->TotalMaxVrefRange - 1) - 1)) {
+ MaxVrefPositive = 0x1E;
+ break;
+ }
+ }
+ NBPtr->FamilySpecificHook[Adjust2DVrefStepSize] (NBPtr, &Vref);
+ }
+ if (MaxVrefPositive < SmallestMaxVrefPos) {
+ // Find the smallest Max Pos Vref
+ SmallestMaxVrefPos = MaxVrefPositive;
+ }
+ if (MaxVrefNegative > SmallestMaxVrefNeg) {
+ // Find the largest Max Neg Vref
+ SmallestMaxVrefNeg = MaxVrefNegative;
+ }
+ }
+ if (SmallestMaxVrefPos != (Data->Vnom - 2)) {
+ Data->SmallestPosMaxVrefperCS[NBPtr->TechPtr->ChipSel] = SmallestMaxVrefPos - Data->Vnom + 1;
+ } else {
+ Data->SmallestPosMaxVrefperCS[NBPtr->TechPtr->ChipSel] = 0;
+ }
+ Data->SmallestNegMaxVrefperCS[NBPtr->TechPtr->ChipSel] = (Data->Vnom - 1) - SmallestMaxVrefNeg;
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSmallest Max Positive Vref Offset from V-Nom for ChipSel %02x = + %02x\n", NBPtr->TechPtr->ChipSel, Data->SmallestPosMaxVrefperCS[NBPtr->TechPtr->ChipSel]);
+ if (Data->SmallestPosMaxVrefperCS[NBPtr->TechPtr->ChipSel] == 0) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSmallest Max Negative Vref Offset from V-Nom for ChipSel %02x = 00\n");
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSmallest Max Negative Vref Offset from V-Nom for ChipSel %02x = - %02x\n", NBPtr->TechPtr->ChipSel, Data->SmallestNegMaxVrefperCS[NBPtr->TechPtr->ChipSel]);
+ }
+ );
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finds the final Vref Margin for 2D RdDQS or WrDat training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return BOOLEAN
+ * TRUE - No Errors occurred
+ * FALSE - Errors ccurred
+ */
+BOOLEAN
+MemFRdWr2DFinalVrefMargin (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ )
+{
+ UINT8 ChipSel;
+ UINT8 SmallestMaxPosVref;
+ UINT8 SmallestMaxNegVref;
+ UINT8 OffsetFromVref;
+ UINT8 Vnom;
+ SmallestMaxNegVref = 0x7F;
+ SmallestMaxPosVref = 0x7F;
+ Vnom = (Data->Vnom - 1);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFinding Final Vref for channel\n\n");
+ for (ChipSel = 0; ChipSel < NBPtr->CsPerChannel; ChipSel = ChipSel + NBPtr->CsPerDelay ) {
+ if ( (NBPtr->MCTPtr->Status[SbLrdimms]) ? ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0) :
+ ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) != 0) ) {
+ if (Data->SmallestPosMaxVrefperCS[ChipSel] < SmallestMaxPosVref) {
+ SmallestMaxPosVref = Data->SmallestPosMaxVrefperCS[ChipSel];
+ }
+ if (Data->SmallestNegMaxVrefperCS[ChipSel] < SmallestMaxNegVref) {
+ SmallestMaxNegVref = Data->SmallestNegMaxVrefperCS[ChipSel];
+ }
+ }
+ }
+ //
+ // Synchronize minimum and Maximums with other Vref values
+ //
+ if (NBPtr->TechPtr->Direction == DQS_WRITE_DIR) {
+ if (NBPtr->SharedPtr->CommonSmallestMaxNegVref < SmallestMaxNegVref) {
+ SmallestMaxNegVref = NBPtr->SharedPtr->CommonSmallestMaxNegVref;
+ } else {
+ NBPtr->SharedPtr->CommonSmallestMaxNegVref = SmallestMaxNegVref;
+ }
+ if (NBPtr->SharedPtr->CommonSmallestMaxPosVref < SmallestMaxPosVref) {
+ SmallestMaxPosVref = NBPtr->SharedPtr->CommonSmallestMaxPosVref;
+ } else {
+ NBPtr->SharedPtr->CommonSmallestMaxPosVref = SmallestMaxPosVref;
+ }
+ }
+ NBPtr->FamilySpecificHook[RdWr2DScaleVref] (NBPtr, &SmallestMaxPosVref);
+ NBPtr->FamilySpecificHook[RdWr2DScaleVref] (NBPtr, &SmallestMaxNegVref);
+ NBPtr->FamilySpecificHook[RdWr2DScaleVref] (NBPtr, &Vnom);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tScaled Smallest Max Positive = + %02x\n", SmallestMaxPosVref);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tScaled Smallest Max Negative =%s%02x\n", ((SmallestMaxNegVref != 0) ? " - " : " "), SmallestMaxNegVref);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tScaled Vnom = %02x\n", Vnom);
+
+ if (SmallestMaxPosVref > SmallestMaxNegVref) {
+ OffsetFromVref = (SmallestMaxPosVref - SmallestMaxNegVref) / 2;
+ NBPtr->ChannelPtr->MaxVref = Vnom + OffsetFromVref;
+ } else {
+ OffsetFromVref = (SmallestMaxNegVref - SmallestMaxPosVref) / 2;
+ NBPtr->ChannelPtr->MaxVref = Vnom - OffsetFromVref;
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tFinal Vref Offset From Vnom =%s%02x\n",
+ ((OffsetFromVref != 0) ? ((SmallestMaxPosVref > SmallestMaxNegVref) ? " + ":" - "):" "), OffsetFromVref);
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function displays ther results of the 2D search
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ */
+VOID
+MemFRdWr2DDisplaySearch (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ )
+{
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ UINT8 Lane;
+ INT8 Vref;
+ // Display data collected
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tDisplaying Data collected\n\n");
+ for (Lane = 0; Lane < MemFRdWr2DGetMaxLanes (NBPtr); Lane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tLane: %02x\n", Lane);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t Vref %s\n", (NBPtr->TechPtr->Direction == DQS_READ_DIR) ? "NegRdDqs PosRdDqs" : "PosWrDat");
+ for (Vref = NBPtr->TotalMaxVrefRange - 2; Vref >= 0; Vref--) {
+ if (Vref < (Data->Vnom - 1)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t - ");
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", ((Data->Vnom -1) - Vref));
+ } else if (Vref == (Data->Vnom - 1)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t 00 ");
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t + ");
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", Vref - (Data->Vnom - 1));
+ }
+ if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%08x", Data->Lane[Lane].Vref[Vref].NegRdWrDly);
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, " ");
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "%08x \n", Data->Lane[Lane].Vref[Vref].PosRdWrDly);
+ NBPtr->FamilySpecificHook[Adjust2DVrefStepSize] (NBPtr, &Vref);
+ }
+ }
+ )
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdWr2DTraining.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdWr2DTraining.h
new file mode 100644
index 0000000..a2a4b02
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/RDWR2DTRAINING/mfRdWr2DTraining.h
@@ -0,0 +1,266 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mf2DRdWrTraining.h
+ *
+ * Common Definitions ot support 2D Read/Write Training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/2DRdWrTraining)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MFRDWR2DTRAINING_H_
+#define _MFRDWR2DTRAINING_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_2D_VREF_ENTRIES 0x20 ///< Maximum number of vref entries
+#define MAX_RD_WR_DLY_ENTRIES 0x40 ///< Maximum number of RD/WR Delay Entries
+#define VREF_ADDITIONAL_STEP_SIZE 0x0 ///< Vref Additional Step size
+#define RDDQS_ADDITIONAL_STEP_SIZE 0x0 ///< RdDqs Additional Step size
+#define MAX_2D_RD_SEED_COUNT 4 ///< Max Seed count
+#define MAX_2D_RD_WR_CS_PER_CHANNEL 8 ///< Max CS per Rd Wr delay group
+
+#define EYERIM_PARALLEL_SAMPLING TRUE
+#define EYERIM_BROADCAST_DELAYS TRUE
+
+/// Structure for RD DQS 2D training RDDQS delays.
+typedef struct {
+ UINT32 PosRdWrDly; ///< Positive RdDQS Delay
+ UINT32 NegRdWrDly; ///< Negative RdDQS Delay
+} RD_WR_2D;
+
+/// Structure for RD DQS 2D training Vref delays
+typedef struct {
+ RD_WR_2D *Vref; ///< Pointer to Vref Entries
+ UINT16 Convolution[MAX_RD_WR_DLY_ENTRIES]; ///< Total number of passes in each mask
+ UINT8 PosHeight[MAX_RD_WR_DLY_ENTRIES / 2]; ///< Positive Vref height Height per Delay
+ UINT8 NegHeight[MAX_RD_WR_DLY_ENTRIES / 2]; ///< Negative Vref height Height per Delay
+ UINT8 HalfDiamondHeight; ///< Half of the Height per BL (height of pos/neg vref)
+ UINT8 MaxRdWrDly; ///< Max RdWrDly from convolution function
+} VREF_RD_WR_2D;
+
+/// Structure for RD DQS 2D training Nibbles
+typedef struct {
+ VREF_RD_WR_2D Lane[MAX_NUMBER_LANES]; ///< Bytelane or Nibble
+ UINT8 Vnom; ///< Nominal Vref value
+ UINT8 MaxRdWrSweep; ///< Maximum RdDqs or WrDat Sweep size
+ UINT8 SmallestPosMaxVrefperCS[MAX_2D_RD_WR_CS_PER_CHANNEL]; ///< Smallest Positive Max Vref per CS
+ UINT8 SmallestNegMaxVrefperCS[MAX_2D_RD_WR_CS_PER_CHANNEL]; ///< Smallest Negative Max Vref per CS
+ UINT8 DiamondLeft[MAX_2D_VREF_ENTRIES]; ///< Left edge of Diamond for shape display
+ UINT8 DiamondRight[MAX_2D_VREF_ENTRIES]; ///< Left edge of Diamond for shape display
+ UINT8 RdWrDly; ///< RdDQS or WrDat Dly setting
+ VOID* SavedData; ///< Algorithm-specific saved data
+} MEM_RD_WR_2D_ENTRY;
+
+/// Structure used for RD WR 2D Eye Rim Search Algorithm
+typedef struct {
+ VREF_RD_WR_2D LaneSaved[MAX_NUMBER_LANES]; ///< Bytelane or Nibble that was saved
+ INT8 xMin; ///< Minimum value for RdDqs delays
+ INT8 xMax; ///< Maximum value for RdDqs delays
+ INT8 yMin; ///< Minimum value for vref delays
+ INT8 yMax; ///< Maximum value for vref delays
+ BOOLEAN ParallelSampling; ///< Flag to indicate parallel sampling feature
+ BOOLEAN BroadcastDelays; ///< Flag to indicate if delays will be broadcast
+ UINT32 SampleCount; ///< Count of samples taken
+ UINT32 VrefUpdates; ///< Count of updates to Vref
+ UINT32 RdWrDlyUpdates; ///< Count of updates to RdWrDly
+ INT8 Dirs[2]; ///< List of directions to search for each axis
+} MEM_RD_WR_2D_RIM_ENTRY;
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemFAmdRdWr2DTraining (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID* OptParam
+ );
+
+BOOLEAN
+MemFCheckRdWr2DTrainingPerConfig (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemFRdWr2DProgramIntExtVrefSelect (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemFRdWr2DProgramVref (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *VrefPtr
+ );
+
+BOOLEAN
+MemFRdWr2DProgramDelays (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *Delay
+ );
+
+VOID
+MemFRdWr2DStoreResult (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data,
+ IN UINT32 InPhaseResult[],
+ IN UINT32 PhaseResult180[]
+ );
+
+BOOLEAN
+MemFRdWr2DHeight (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ );
+
+UINT8
+MemFGetRdWr2DWidth (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ );
+
+BOOLEAN
+MemFCheckRdWr2DDiamondMaskStep (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data,
+ IN UINT8 Vref,
+ IN UINT8 Lane
+ );
+BOOLEAN
+MemFRdWr2DApplyMask (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ );
+
+BOOLEAN
+MemFRdWr2DProcessConvolution (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ );
+
+BOOLEAN
+MemFRdWr2DProgramMaxDelays (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ );
+
+BOOLEAN
+MemFRdWr2DFindCsVrefMargin (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ );
+
+BOOLEAN
+MemFRdWr2DFinalVrefMargin (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ );
+
+UINT8
+MemFRdWr2DGetMaxLanes (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemFRdWr2DTrainingInit (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemFRdWr2DEyeRimSearch (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *OptParam
+ );
+
+VOID
+MemFRdWr2DDisplaySearch (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_RD_WR_2D_ENTRY *Data
+ );
+
+/*******************************
+* Pattern Generation Functions
+*******************************/
+BOOLEAN
+MemFRdWr2DCompareInPhase (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ OUT VOID *Result
+ );
+
+BOOLEAN
+MemFRdWr2DCompare180Phase (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ OUT VOID *Result
+ );
+
+BOOLEAN
+MemFRdWr2DInitVictim (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemFRdWr2DInitVictimChipSel (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemFRdWr2DStartVictim (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *SeedCountPtr
+ );
+
+BOOLEAN
+MemFRdWr2DFinalizeVictim (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemFRdWr2DProgramDataPattern (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID* PatternIndexPtr
+ );
+
+#endif /* _MFRDWR2DTRAINING_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/S3/mfs3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/S3/mfs3.c
new file mode 100644
index 0000000..e6914a7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/S3/mfs3.c
@@ -0,0 +1,718 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfs3.c
+ *
+ * Main S3 resume memory Entrypoint file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/FEAT/S3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "heapManager.h"
+#include "amdlib.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_S3_MFS3_FILECODE
+
+extern MEM_NB_SUPPORT memNBInstalled[];
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function is the main memory entry point for the S3 resume sequence
+ * Requirements:
+ *
+ * Run-Time Requirements:
+ * 1. Complete Hypertransport Bus Configuration
+ * 4. BSP in Big Real Mode
+ * 5. Stack available
+ *
+ * @param[in] *StdHeader - Config handle for library and services
+ *
+ * @return AGESA_STATUS
+ * - AGESA_ALERT
+ * - AGESA_FATAL
+ * - AGESA_SUCCESS
+ * - AGESA_WARNING
+ */
+AGESA_STATUS
+AmdMemS3Resume (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS RetVal;
+ MEM_MAIN_DATA_BLOCK mmData;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ MEM_DATA_STRUCT *MemData;
+ UINT8 Die;
+ UINT8 DieCount;
+
+ //---------------------------------------------
+ // Creation of NB Block for S3 resume
+ //---------------------------------------------
+ RetVal = MemS3InitNB (&S3NBPtr, &MemData, &mmData, StdHeader);
+ if (RetVal == AGESA_FATAL) {
+ return RetVal;
+ }
+ DieCount = mmData.DieCount;
+
+ //---------------------------------------------
+ //1. Errata Before resume sequence
+ //2. S3 Resume sequence
+ //3. Errata After resume sequence
+ //---------------------------------------------
+ for (Die = 0; Die < DieCount; Die ++) {
+ if (!S3NBPtr[Die].MemS3Resume (&S3NBPtr[Die], Die)) {
+ return AGESA_FATAL;
+ }
+ S3NBPtr[Die].MemS3RestoreScrub (S3NBPtr[Die].NBPtr, Die);
+ }
+
+ HeapDeallocateBuffer (AMD_MEM_S3_DATA_HANDLE, StdHeader);
+ return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function deallocates heap space allocated in memory S3 resume.
+ *
+ * @param[in] *StdHeader - Config handle for library and services
+ *
+ * @return AGESA_STATUS
+ * - AGESA_ALERT
+ * - AGESA_FATAL
+ * - AGESA_SUCCESS
+ * - AGESA_WARNING
+ */
+AGESA_STATUS
+MemS3Deallocate (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS RetVal;
+ AGESA_STATUS tempRetVal;
+ UINT8 Tab;
+
+ RetVal = AGESA_SUCCESS;
+ for (Tab = 0; Tab < NumberOfNbRegTables; Tab++) {
+ HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_NB_REG_TABLE, Tab, 0, 0), StdHeader);
+ }
+
+ tempRetVal = HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_DIE_STRUCT_HANDLE, 0, 0, 0), StdHeader);
+ if (tempRetVal > RetVal) {
+ RetVal = tempRetVal;
+ }
+ tempRetVal = HeapDeallocateBuffer (AMD_MEM_AUTO_HANDLE, StdHeader);
+ if (tempRetVal > RetVal) {
+ RetVal = tempRetVal;
+ }
+ RetVal = HeapDeallocateBuffer (AMD_MEM_S3_NB_HANDLE, StdHeader);
+ if (tempRetVal > RetVal) {
+ RetVal = tempRetVal;
+ }
+ RetVal = HeapDeallocateBuffer (AMD_MEM_DATA_HANDLE, StdHeader);
+ if (tempRetVal > RetVal) {
+ RetVal = tempRetVal;
+ }
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function is the entrance to get device list for memory registers.
+ *
+ * @param[in, out] **DeviceBlockHdrPtr - Pointer to the memory containing the
+ * device descriptor list
+ * @param[in] *StdHeader - Config handle for library and services
+ * @return AGESA_STATUS
+ * - AGESA_ALERT
+ * - AGESA_FATAL
+ * - AGESA_SUCCESS
+ * - AGESA_WARNING
+ */
+AGESA_STATUS
+MemFS3GetDeviceList (
+ IN OUT DEVICE_BLOCK_HEADER **DeviceBlockHdrPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+ UINT16 BufferSize;
+ UINT64 BufferOffset;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ MEM_DATA_STRUCT *MemData;
+ MEM_MAIN_DATA_BLOCK mmData;
+ UINT8 Die;
+ UINT8 DieCount;
+ AGESA_STATUS RetVal;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ DESCRIPTOR_GROUP DeviceDescript[MAX_NODES_SUPPORTED];
+ BufferSize = 0;
+
+ //---------------------------------------------
+ // Creation of NB Block for S3 resume
+ //---------------------------------------------
+ RetVal = MemS3InitNB (&S3NBPtr, &MemData, &mmData, StdHeader);
+ if (RetVal == AGESA_FATAL) {
+ return RetVal;
+ }
+ DieCount = mmData.DieCount;
+
+ // Get the mask bit and the register list for node that presents
+ for (Die = 0; Die < DieCount; Die ++) {
+ S3NBPtr->MemS3GetConPCIMask (S3NBPtr[Die].NBPtr, (VOID *)&DeviceDescript[Die]);
+ S3NBPtr->MemS3GetConMSRMask (S3NBPtr[Die].NBPtr, (VOID *)&DeviceDescript[Die]);
+ BufferSize = BufferSize + S3NBPtr->MemS3GetRegLstPtr (S3NBPtr[Die].NBPtr, (VOID *)&DeviceDescript[Die]);
+ }
+
+ // Base on the size of the device list, apply for a buffer for it.
+ AllocHeapParams.RequestedBufferSize = BufferSize + sizeof (DEVICE_BLOCK_HEADER);
+ AllocHeapParams.BufferHandle = AMD_S3_NB_INFO_BUFFER_HANDLE;
+ AllocHeapParams.Persist = HEAP_S3_RESUME;
+ AGESA_TESTPOINT (TpIfBeforeAllocateMemoryS3SaveBuffer, StdHeader);
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) {
+ return AGESA_FATAL;
+ }
+ AGESA_TESTPOINT (TpIfAfterAllocateMemoryS3SaveBuffer, StdHeader);
+
+ *DeviceBlockHdrPtr = (DEVICE_BLOCK_HEADER *) AllocHeapParams.BufferPtr;
+ (*DeviceBlockHdrPtr)->RelativeOrMaskOffset = (UINT16) AllocHeapParams.RequestedBufferSize;
+
+ // Copy device list on the stack to the heap.
+ BufferOffset = sizeof (DEVICE_BLOCK_HEADER) + (UINT64) (UINTN) AllocHeapParams.BufferPtr;
+ for (Die = 0; Die < DieCount; Die ++) {
+ for (i = PRESELFREF; i <= POSTSELFREF; i ++) {
+ // Copy PCI device descriptor to the heap if it exists.
+ if (DeviceDescript[Die].PCIDevice[i].RegisterListID != 0xFFFFFFFF) {
+ LibAmdMemCopy ((VOID *) (UINTN) BufferOffset, &(DeviceDescript[Die].PCIDevice[i]), sizeof (PCI_DEVICE_DESCRIPTOR), StdHeader);
+ (*DeviceBlockHdrPtr)->NumDevices ++;
+ BufferOffset += sizeof (PCI_DEVICE_DESCRIPTOR);
+ }
+ // Copy conditional PCI device descriptor to the heap if it exists.
+ if (DeviceDescript[Die].CPCIDevice[i].RegisterListID != 0xFFFFFFFF) {
+ LibAmdMemCopy ((VOID *) (UINTN) BufferOffset, &(DeviceDescript[Die].CPCIDevice[i]), sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR), StdHeader);
+ (*DeviceBlockHdrPtr)->NumDevices ++;
+ BufferOffset += sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR);
+ }
+ // Copy MSR device descriptor to the heap if it exists.
+ if (DeviceDescript[Die].MSRDevice[i].RegisterListID != 0xFFFFFFFF) {
+ LibAmdMemCopy ((VOID *) (UINTN) BufferOffset, &(DeviceDescript[Die].MSRDevice[i]), sizeof (MSR_DEVICE_DESCRIPTOR), StdHeader);
+ (*DeviceBlockHdrPtr)->NumDevices ++;
+ BufferOffset += sizeof (MSR_DEVICE_DESCRIPTOR);
+ }
+ // Copy conditional MSR device descriptor to the heap if it exists.
+ if (DeviceDescript[Die].CMSRDevice[i].RegisterListID != 0xFFFFFFFF) {
+ LibAmdMemCopy ((VOID *) (UINTN) BufferOffset, &(DeviceDescript[Die].PCIDevice[i]), sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR), StdHeader);
+ (*DeviceBlockHdrPtr)->NumDevices ++;
+ BufferOffset += sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR);
+ }
+ }
+ }
+
+ return RetVal;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initialize the northbridge block and apply for heap space
+ * before any function call is made to memory component during S3 resume.
+ *
+ * @param[in] *StdHeader - Config handle for library and services
+ * @return AGESA_STATUS
+ * - AGESA_ALERT
+ * - AGESA_FATAL
+ * - AGESA_SUCCESS
+ * - AGESA_WARNING
+ */
+AGESA_STATUS
+MemS3ResumeInitNB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS RetVal;
+ MEM_MAIN_DATA_BLOCK mmData;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ MEM_DATA_STRUCT *MemData;
+ UINT8 Die;
+ UINT8 DieCount;
+ UINT8 SpecialCaseHeapSize;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ S3_SPECIAL_CASE_HEAP_HEADER SpecialHeapHeader[MAX_NODES_SUPPORTED];
+
+ SpecialCaseHeapSize = 0;
+
+ //---------------------------------------------
+ // Creation of NB Block for S3 resume
+ //---------------------------------------------
+ RetVal = MemS3InitNB (&S3NBPtr, &MemData, &mmData, StdHeader);
+ if (RetVal == AGESA_FATAL) {
+ return RetVal;
+ }
+ DieCount = mmData.DieCount;
+
+ //--------------------------------------------------
+ // Apply for heap space for special case registers
+ //--------------------------------------------------
+ for (Die = 0; Die < DieCount; Die ++) {
+ // Construct the header for the special case heap.
+ SpecialHeapHeader[Die].Node = S3NBPtr[Die].NBPtr->Node;
+ SpecialHeapHeader[Die].Offset = SpecialCaseHeapSize + (DieCount * (sizeof (S3_SPECIAL_CASE_HEAP_HEADER)));
+ SpecialCaseHeapSize = SpecialCaseHeapSize + S3NBPtr->MemS3SpecialCaseHeapSize;
+ }
+ AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (S3_SPECIAL_CASE_HEAP_HEADER))) + SpecialCaseHeapSize;
+ AllocHeapParams.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) {
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS, S3NBPtr[Die].NBPtr->Node, 0, 0, 0, StdHeader);
+ SetMemError (AGESA_FATAL, S3NBPtr[Die].NBPtr->MCTPtr);
+ ASSERT(FALSE); // Could not allocate heap space for "S3_SPECIAL_CASE_HEAP_HEADER"
+ return AGESA_FATAL;
+ }
+ LibAmdMemCopy ((VOID *) AllocHeapParams.BufferPtr, (VOID *) SpecialHeapHeader, (sizeof (S3_SPECIAL_CASE_HEAP_HEADER) * DieCount), StdHeader);
+ return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns the PCI device register list according to the register
+ * list ID.
+ *
+ * @param[in] *Device - pointer to the PCI_DEVICE_DESCRIPTOR
+ * @param[out] **RegisterHdr - pointer to the address of the register list
+ * @param[in] *StdHeader - Config handle for library and services
+ *
+ * @return AGESA_STATUS
+ * - AGESA_ALERT
+ * - AGESA_FATAL
+ * - AGESA_SUCCESS
+ * - AGESA_WARNING
+ */
+AGESA_STATUS
+MemFS3GetPciDeviceRegisterList (
+ IN PCI_DEVICE_DESCRIPTOR *Device,
+ OUT PCI_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS RetVal;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ VOID *RegisterHeader;
+ LOCATE_HEAP_PTR LocHeap;
+ AGESA_BUFFER_PARAMS LocBufferParams;
+ LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+
+ LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+ LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+
+ AGESA_TESTPOINT (TpIfBeforeLocateS3PciBuffer, StdHeader);
+ if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
+ } else {
+ ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr
+ return AGESA_FATAL;
+ }
+ AGESA_TESTPOINT (TpIfAfterLocateS3PciBuffer, StdHeader);
+
+ // NB block has already been constructed by main block.
+ // No need to construct it here.
+ RetVal = S3NBPtr[Device->Node].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader);
+ *RegisterHdr = (PCI_REGISTER_BLOCK_HEADER *)RegisterHeader;
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns the conditional PCI device register list according
+ * to the register list ID.
+ *
+ * @param[in] *Device - pointer to the CONDITIONAL_PCI_DEVICE_DESCRIPTOR
+ * @param[out] **RegisterHdr - pointer to the address of the register list
+ * @param[in] *StdHeader - Config handle for library and services
+ *
+ * @return AGESA_STATUS
+ * - AGESA_ALERT
+ * - AGESA_FATAL
+ * - AGESA_SUCCESS
+ * - AGESA_WARNING
+ */
+AGESA_STATUS
+MemFS3GetCPciDeviceRegisterList (
+ IN CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+ OUT CPCI_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS RetVal;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ VOID *RegisterHeader;
+ LOCATE_HEAP_PTR LocHeap;
+ AGESA_BUFFER_PARAMS LocBufferParams;
+
+ LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+ LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+
+ AGESA_TESTPOINT (TpIfBeforeLocateS3CPciBuffer, StdHeader);
+ if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
+ } else {
+ ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr
+ return AGESA_FATAL;
+ }
+ AGESA_TESTPOINT (TpIfAfterLocateS3CPciBuffer, StdHeader);
+
+ // NB block has already been constructed by main block.
+ // No need to construct it here.
+ RetVal = S3NBPtr[Device->Node].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader);
+ *RegisterHdr = (CPCI_REGISTER_BLOCK_HEADER *)RegisterHeader;
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns the MSR device register list according to the register
+ * list ID.
+ *
+ * @param[in] *Device - pointer to the MSR_DEVICE_DESCRIPTOR
+ * @param[out] **RegisterHdr - pointer to the address of the register list
+ * @param[in] *StdHeader - Config handle for library and services
+ *
+ * @return AGESA_STATUS
+ * - AGESA_ALERT
+ * - AGESA_FATAL
+ * - AGESA_SUCCESS
+ * - AGESA_WARNING
+ */
+AGESA_STATUS
+MemFS3GetMsrDeviceRegisterList (
+ IN MSR_DEVICE_DESCRIPTOR *Device,
+ OUT MSR_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS RetVal;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ VOID *RegisterHeader;
+ LOCATE_HEAP_PTR LocHeap;
+ AGESA_BUFFER_PARAMS LocBufferParams;
+
+ LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+ LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+
+ AGESA_TESTPOINT (TpIfBeforeLocateS3MsrBuffer, StdHeader);
+ if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
+ } else {
+ ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr
+ return AGESA_FATAL;
+ }
+ AGESA_TESTPOINT (TpIfAfterLocateS3MsrBuffer, StdHeader);
+
+ // NB block has already been constructed by main block.
+ // No need to construct it here.
+ RetVal = S3NBPtr[BSP_DIE].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader);
+ *RegisterHdr = (MSR_REGISTER_BLOCK_HEADER *)RegisterHeader;
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns the conditional MSR device register list according
+ * to the register list ID.
+ *
+ * @param[in] *Device - pointer to the CONDITIONAL_PCI_DEVICE_DESCRIPTOR
+ * @param[out] **RegisterHdr - pointer to the address of the register list
+ * @param[in] *StdHeader - Config handle for library and services
+ *
+ * @return AGESA_STATUS
+ * - AGESA_ALERT
+ * - AGESA_FATAL
+ * - AGESA_SUCCESS
+ * - AGESA_WARNING
+ */
+AGESA_STATUS
+MemFS3GetCMsrDeviceRegisterList (
+ IN CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+ OUT CMSR_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ AGESA_STATUS RetVal;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ VOID *RegisterHeader;
+ LOCATE_HEAP_PTR LocHeap;
+ AGESA_BUFFER_PARAMS LocBufferParams;
+
+ LibAmdMemCopy (&LocBufferParams.StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+ LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ LocBufferParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+
+
+ AGESA_TESTPOINT (TpIfBeforeLocateS3CMsrBuffer, StdHeader);
+ if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
+ } else {
+ ASSERT(FALSE) ; // No match for heap status, but could not locate "AMD_MEM_S3_NB_HANDLE" in heap for S3GetMsr
+ return AGESA_FATAL;
+ }
+ AGESA_TESTPOINT (TpIfAfterLocateS3CMsrBuffer, StdHeader);
+
+ // NB block has already been constructed by main block.
+ // No need to construct it here.
+ RetVal = S3NBPtr[BSP_DIE].MemS3GetDeviceRegLst (Device->RegisterListID, &RegisterHeader);
+ *RegisterHdr = (CMSR_REGISTER_BLOCK_HEADER *)RegisterHeader;
+ return RetVal;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initialize needed data structures for S3 resume.
+ *
+ * @param[in, out] **S3NBPtr - Pointer to the pointer of northbridge block.
+ * @param[in, out] *MemPtr - Pointer to MEM_DATA_STRUCT.
+ * @param[in, out] *mmData - Pointer to MEM_MAIN_DATA_BLOCK.
+ * @param[in] *StdHeader - Config handle for library and services.
+ *
+ * @return AGESA_STATUS
+ * - AGESA_ALERT
+ * - AGESA_FATAL
+ * - AGESA_SUCCESS
+ * - AGESA_WARNING
+ */
+AGESA_STATUS
+MemS3InitNB (
+ IN OUT S3_MEM_NB_BLOCK **S3NBPtr,
+ IN OUT MEM_DATA_STRUCT **MemPtr,
+ IN OUT MEM_MAIN_DATA_BLOCK *mmData,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 i;
+ AGESA_STATUS RetVal;
+ LOCATE_HEAP_PTR LocHeap;
+ MEM_NB_BLOCK *NBPtr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ UINT8 Die;
+ UINT8 DieCount;
+ BOOLEAN SkipScan;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ SkipScan = FALSE;
+ LocHeap.BufferHandle = AMD_MEM_DATA_HANDLE;
+ if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+ // NB block has already been constructed by main block.
+ // No need to construct it here.
+ *MemPtr = (MEM_DATA_STRUCT *)LocHeap.BufferPtr;
+ SkipScan = TRUE;
+ } else {
+ AllocHeapParams.RequestedBufferSize = sizeof (MEM_DATA_STRUCT);
+ AllocHeapParams.BufferHandle = AMD_MEM_DATA_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) {
+ ASSERT(FALSE); // Allocate failed for MEM_DATA_STRUCT
+ return AGESA_FATAL;
+ }
+ *MemPtr = (MEM_DATA_STRUCT *)AllocHeapParams.BufferPtr;
+ LibAmdMemCopy (&(*MemPtr)->StdHeader, StdHeader, sizeof (AMD_CONFIG_PARAMS), StdHeader);
+
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &(*MemPtr)->StdHeader);
+ FamilySpecificServices->GetTscRate (FamilySpecificServices, &(*MemPtr)->TscRate, &(*MemPtr)->StdHeader);
+
+ }
+ mmData->MemPtr = *MemPtr;
+
+ if (!SkipScan) {
+ RetVal = MemSocketScan (mmData);
+ if (RetVal == AGESA_FATAL) {
+ return RetVal;
+ }
+ } else {
+ // We already have initialize data block, no need to do it again.
+ mmData->DieCount = mmData->MemPtr->DieCount;
+ }
+ DieCount = mmData->DieCount;
+
+ //---------------------------------------------
+ // Creation of NB Block for S3 resume
+ //---------------------------------------------
+ // Search for AMD_MEM_AUTO_HANDLE on the heap first.
+ // Only apply for space on the heap if cannot find AMD_MEM_AUTO_HANDLE on the heap.
+ LocHeap.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+ // NB block has already been constructed by main block.
+ // No need to construct it here.
+ *S3NBPtr = (S3_MEM_NB_BLOCK *)LocHeap.BufferPtr;
+ } else {
+ AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (S3_MEM_NB_BLOCK)));
+ AllocHeapParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) {
+ ASSERT(FALSE); // Could not allocate space for "S3_MEM_NB_BLOCK"
+ return AGESA_FATAL;
+ }
+ *S3NBPtr = (S3_MEM_NB_BLOCK *)AllocHeapParams.BufferPtr;
+
+ LocHeap.BufferHandle = AMD_MEM_AUTO_HANDLE;
+ if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+ // NB block has already been constructed by main block.
+ // No need to construct it here.
+ NBPtr = (MEM_NB_BLOCK *)LocHeap.BufferPtr;
+ } else {
+ AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (MEM_NB_BLOCK)));
+ AllocHeapParams.BufferHandle = AMD_MEM_AUTO_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) != AGESA_SUCCESS) {
+ ASSERT(FALSE); // Allocate failed for "MEM_NB_BLOCK"
+ return AGESA_FATAL;
+ }
+ NBPtr = (MEM_NB_BLOCK *)AllocHeapParams.BufferPtr;
+ }
+ // Construct each die.
+ for (Die = 0; Die < DieCount; Die ++) {
+ i = 0;
+ ((*S3NBPtr)[Die]).NBPtr = &NBPtr[Die];
+ while (memNBInstalled[i].MemS3ResumeConstructNBBlock != 0) {
+ if (memNBInstalled[i].MemS3ResumeConstructNBBlock ((VOID *)&((*S3NBPtr)[Die]), *MemPtr, Die)) {
+ break;
+ }
+ i++;
+ };
+ if (memNBInstalled[i].MemS3ResumeConstructNBBlock == 0) {
+ ASSERT(FALSE); // S3 resume NB constructor not found
+ return AGESA_FATAL;
+ }
+ }
+ }
+ return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Waits specified number of 10ns cycles
+ * @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ * @param[in] Count - Number of 10ns cycles to wait
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID
+MemFS3Wait10ns (
+ IN UINT32 Count,
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ )
+{
+ UINT64 TargetTsc;
+ UINT64 CurrentTsc;
+
+ ASSERT (Count <= 1000000);
+
+ LibAmdMsrRead (TSC, &CurrentTsc, &MemPtr->StdHeader);
+ TargetTsc = CurrentTsc + ((Count * MemPtr->TscRate + 99) / 100);
+ do {
+ LibAmdMsrRead (TSC, &CurrentTsc, &MemPtr->StdHeader);
+ } while (CurrentTsc < TargetTsc);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/TABLE/mftds.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/TABLE/mftds.c
new file mode 100644
index 0000000..accc96b0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Feat/TABLE/mftds.c
@@ -0,0 +1,401 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mftds.c
+ *
+ * Northbridge table drive support file for DR
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/TABLE)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mftds.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_FEAT_TABLE_MFTDS_FILECODE
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define MAX_BYTELANES_PER_CHANNEL (8 + 1) ///< Max Bytelanes per channel
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+SetTableValues (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_TABLE_ALIAS MTPtr
+ );
+
+VOID
+SetTableValuesLoop (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_TABLE_ALIAS *MTPtr,
+ IN UINT8 time
+ );
+
+/*-----------------------------------------------------------------------------
+ *
+ * This function initializes bit field translation table
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_TABLE_ALIAS structure
+ * @param[in] time - Indicate the timing for the register which is written.
+ *
+ * @return None
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemFInitTableDrive (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 time
+ )
+{
+ MEM_TABLE_ALIAS *MTPtr;
+ MEM_TABLE_ALIAS *IdsMTPtr;
+
+ ASSERT (NBPtr != NULL);
+ IdsMTPtr = NULL;
+ IDS_HDT_CONSOLE (MEM_FLOW, "MemFInitTableDrive [%X] Start\n", time);
+ MTPtr = (MEM_TABLE_ALIAS *) NBPtr->RefPtr->TableBasedAlterations;
+
+ IDS_SKIP_HOOK (IDS_GET_DRAM_TABLE, &IdsMTPtr, &(NBPtr->MemPtr->StdHeader)) {
+ IDS_OPTION_HOOK (IDS_INIT_DRAM_TABLE, NBPtr, &(NBPtr->MemPtr->StdHeader));
+ IDS_OPTION_HOOK (IDS_GET_DRAM_TABLE, &IdsMTPtr, &(NBPtr->MemPtr->StdHeader));
+ }
+
+ SetTableValuesLoop (NBPtr, MTPtr, time);
+ SetTableValuesLoop (NBPtr, IdsMTPtr, time);
+
+ IDS_OPTION_HOOK (IDS_MT_BASE + time, NBPtr, &(NBPtr->MemPtr->StdHeader));
+ IDS_HDT_CONSOLE (MEM_FLOW, "MemFInitTableDrive End\n");
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * This function initializes bit field translation table
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *MTPtr - Pointer to the MEM_TABLE_ALIAS structure
+ * @param[in] time - Indicate the timing for the register which is written.
+ *
+ * @return None
+ * ----------------------------------------------------------------------------
+ */
+VOID
+SetTableValuesLoop (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_TABLE_ALIAS *MTPtr,
+ IN UINT8 time
+ )
+{
+ UINT8 i;
+ UINT8 CurDct;
+
+ if (MTPtr != NULL) {
+ CurDct = NBPtr->Dct;
+ for (i = 0; MTPtr[i].time != MTEnd; i++) {
+ if ((MTPtr[i].attr != MTAuto) && (MTPtr[i].time == time)) {
+ SetTableValues (NBPtr, MTPtr[i]);
+ }
+ }
+ NBPtr->SwitchDCT (NBPtr, CurDct);
+ }
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * Engine for setting Table Value.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] MTPtr - Pointer to the MEM_TABLE_ALIAS structure
+ *
+ * @return None
+ * ----------------------------------------------------------------------------
+ */
+VOID
+SetTableValues (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_TABLE_ALIAS MTPtr
+ )
+{
+ UINT8 AccessType;
+ UINT16 ByteLane;
+ UINT8 Dct;
+ UINT8 i;
+ UINT8 j;
+ UINT32 TempVal[36];
+ UINT32 Temp2Val[72];
+ UINT8 *DqsSavePtr;
+ UINT8 DqsOffset;
+ BOOLEAN SaveDqs;
+
+ AccessType = 0;
+ DqsSavePtr = NULL;
+ SaveDqs = TRUE;
+
+ ASSERT (MTPtr.time <= MTValidTimePointLimit);
+ ASSERT (MTPtr.attr <= MTOr);
+ ASSERT (MTPtr.node <= MTNodes);
+ ASSERT (MTPtr.dct <= MTDcts);
+ ASSERT (MTPtr.dimm <= MTDIMMs);
+ ASSERT (MTPtr.data.s.bytelane <= MTBLs);
+
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ if ((MTPtr.dct == MTDcts) || (MTPtr.dct == Dct)) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ switch (MTPtr.bfindex) {
+ case BFRcvEnDly:
+ AccessType = AccessRcvEnDly;
+ DqsSavePtr = NULL;
+ break;
+ case BFWrDatDly:
+ AccessType = AccessWrDatDly;
+ DqsSavePtr = NBPtr->ChannelPtr->WrDatDlys;
+ break;
+ case BFRdDqsDly:
+ AccessType = AccessRdDqsDly;
+ DqsSavePtr = NBPtr->ChannelPtr->RdDqsDlys;
+ break;
+ case BFWrDqsDly:
+ AccessType = AccessWrDqsDly;
+ DqsSavePtr = NBPtr->ChannelPtr->WrDqsDlys;
+ break;
+ case BFRdDqs2dDly:
+ AccessType = AccessRdDqs2dDly;
+ DqsSavePtr = NBPtr->ChannelPtr->RdDqs2dDlys;
+ break;
+ case BFPhRecDly:
+ AccessType = AccessPhRecDly;
+ SaveDqs = FALSE;
+ break;
+ default:
+ AccessType = 0xFF;
+ break;
+ }
+ if (AccessType == 0xFF) {
+ if (MTPtr.attr == MTOverride) {
+ NBPtr->SetBitField (NBPtr, MTPtr.bfindex, MTPtr.data.s.value);
+ }
+ if (MTPtr.attr == MTSubtract) {
+ NBPtr->SetBitField (NBPtr, MTPtr.bfindex, NBPtr->GetBitField (NBPtr, MTPtr.bfindex) - MTPtr.data.s.value);
+ }
+ if (MTPtr.attr == MTAdd) {
+ NBPtr->SetBitField (NBPtr, MTPtr.bfindex, NBPtr->GetBitField (NBPtr, MTPtr.bfindex) + MTPtr.data.s.value);
+ }
+ if (MTPtr.attr == MTAnd) {
+ NBPtr->SetBitField (NBPtr, MTPtr.bfindex, (NBPtr->GetBitField (NBPtr, MTPtr.bfindex) & MTPtr.data.s.value));
+ }
+ if (MTPtr.attr == MTOr) {
+ NBPtr->SetBitField (NBPtr, MTPtr.bfindex, (NBPtr->GetBitField (NBPtr, MTPtr.bfindex) | MTPtr.data.s.value));
+ }
+ } else {
+ // Store the DQS data first
+ for (i = 0; i < NBPtr->CsPerChannel; i = i + NBPtr->CsPerDelay) {
+ if (AccessType == AccessRdDqs2dDly) {
+ for (j = 0; j < MAX_NUMBER_LANES; j++) {
+ Temp2Val[i * MAX_NUMBER_LANES + j] = NBPtr->GetTrainDly (NBPtr, AccessType, DIMM_NBBL_ACCESS (i, j));
+ }
+ } else {
+ for (j = 0; j < MAX_BYTELANES_PER_CHANNEL; j++) {
+ TempVal[i / NBPtr->CsPerDelay * MAX_BYTELANES_PER_CHANNEL + j] = NBPtr->GetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (i / NBPtr->CsPerDelay, j));
+ }
+ }
+ }
+ //
+ // Single Value with Bytleane mask option
+ // Indicated by the vtype flag
+ //
+ if (MTPtr.vtype == VT_MSK_VALUE) {
+ // set the value which defined in Memory table.
+ for (i = 0; i < NBPtr->CsPerChannel; i = i + NBPtr->CsPerDelay) {
+ ByteLane = MTPtr.data.s.bytelane;
+ if ((MTPtr.dimm == MTDIMMs) || ((MTPtr.dimm * NBPtr->CsPerDelay) == i)) {
+ if (AccessType == AccessRdDqs2dDly) {
+ for (j = 0; j < MAX_NUMBER_LANES; j++) {
+ DqsOffset = (i * MAX_NUMBER_LANES + j);
+ if ((ByteLane & (UINT16)1) != 0) {
+ if (MTPtr.attr == MTOverride) {
+ Temp2Val[DqsOffset] = (UINT16)MTPtr.data.s.value;
+ }
+ if (MTPtr.attr == MTSubtract) {
+ Temp2Val[DqsOffset] -= (UINT16)MTPtr.data.s.value;
+ }
+ if (MTPtr.attr == MTAdd) {
+ Temp2Val[DqsOffset] += (UINT16)MTPtr.data.s.value;
+ }
+ NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_NBBL_ACCESS (i, j), (UINT16)Temp2Val[DqsOffset]);
+ if (SaveDqs) {
+ if (DqsSavePtr == NULL) {
+ NBPtr->ChannelPtr->RcvEnDlys[DqsOffset] = (UINT16)Temp2Val[DqsOffset];
+ } else {
+ DqsSavePtr[DqsOffset] = (UINT8)Temp2Val[DqsOffset];
+ }
+ }
+ }
+ ByteLane = ByteLane >> (UINT16)1;
+ }
+ } else {
+ for (j = 0; j < MAX_BYTELANES_PER_CHANNEL; j++) {
+ DqsOffset = (i / NBPtr->CsPerDelay * MAX_BYTELANES_PER_CHANNEL + j);
+ if ((ByteLane & (UINT16)1) != 0) {
+ if (MTPtr.attr == MTOverride) {
+ TempVal[DqsOffset] = (UINT16)MTPtr.data.s.value;
+ }
+ if (MTPtr.attr == MTSubtract) {
+ TempVal[DqsOffset] -= (UINT16)MTPtr.data.s.value;
+ }
+ if (MTPtr.attr == MTAdd) {
+ TempVal[DqsOffset] += (UINT16)MTPtr.data.s.value;
+ }
+ NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (i / NBPtr->CsPerDelay, j), (UINT16)TempVal[DqsOffset]);
+ if (SaveDqs) {
+ if (DqsSavePtr == NULL) {
+ NBPtr->ChannelPtr->RcvEnDlys[DqsOffset] = (UINT16)TempVal[DqsOffset];
+ } else {
+ DqsSavePtr[DqsOffset] = (UINT8)TempVal[DqsOffset];
+ }
+ }
+ }
+ ByteLane = ByteLane >> (UINT16)1;
+ }
+ }
+ }
+ }
+ } else {
+ // Multiple values specified in a byte array
+ for (i = 0; i < NBPtr->CsPerChannel; i = i + NBPtr->CsPerDelay) {
+ if ((MTPtr.dimm == MTDIMMs) || ((MTPtr.dimm * NBPtr->CsPerDelay) == i)) {
+ if (AccessType == AccessRdDqs2dDly) {
+ for (j = 0; j < MAX_NUMBER_LANES; j++) {
+ DqsOffset = (i * MAX_NUMBER_LANES + j);
+ if (MTPtr.attr == MTOverride) {
+ Temp2Val[DqsOffset] = MTPtr.data.bytelanevalue[j];
+ }
+ if (MTPtr.attr == MTSubtract) {
+ Temp2Val[DqsOffset] -= MTPtr.data.bytelanevalue[j];
+ }
+ if (MTPtr.attr == MTAdd) {
+ Temp2Val[DqsOffset] += MTPtr.data.bytelanevalue[j];
+ }
+ NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_NBBL_ACCESS (i, j), (UINT16)Temp2Val[DqsOffset]);
+ if (SaveDqs) {
+ if (DqsSavePtr == NULL) {
+ NBPtr->ChannelPtr->RcvEnDlys[DqsOffset] = (UINT16)Temp2Val[DqsOffset];
+ } else {
+ DqsSavePtr[DqsOffset] = (UINT8)Temp2Val[DqsOffset];
+ }
+ }
+ }
+ } else {
+ for (j = 0; j < MAX_BYTELANES_PER_CHANNEL; j++) {
+ DqsOffset = (i / NBPtr->CsPerDelay * MAX_BYTELANES_PER_CHANNEL + j);
+ if (MTPtr.attr == MTOverride) {
+ TempVal[DqsOffset] = MTPtr.data.bytelanevalue[j];
+ }
+ if (MTPtr.attr == MTSubtract) {
+ TempVal[DqsOffset] -= MTPtr.data.bytelanevalue[j];
+ }
+ if (MTPtr.attr == MTAdd) {
+ TempVal[DqsOffset] += MTPtr.data.bytelanevalue[j];
+ }
+ NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (i / NBPtr->CsPerDelay, j), (UINT16)TempVal[DqsOffset]);
+ if (SaveDqs) {
+ if (DqsSavePtr == NULL) {
+ NBPtr->ChannelPtr->RcvEnDlys[DqsOffset] = (UINT16)TempVal[DqsOffset];
+ } else {
+ DqsSavePtr[DqsOffset] = (UINT8)TempVal[DqsOffset];
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ // set the DQS value to left DIMMs.
+ i = MTPtr.dimm;
+ if (i != MTDIMMs) {
+ i = i * NBPtr->CsPerDelay + NBPtr->CsPerDelay;
+ while (i < NBPtr->CsPerChannel) {
+ if (AccessType == AccessRdDqs2dDly) {
+ for (j = 0; j < MAX_NUMBER_LANES; j++) {
+ NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_NBBL_ACCESS (i, j), (UINT16)Temp2Val[i * MAX_BYTELANES_PER_CHANNEL + j]);
+ }
+ } else {
+ for (j = 0; j < MAX_BYTELANES_PER_CHANNEL; j++) {
+ NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (i / NBPtr->CsPerDelay, j), (UINT16)TempVal[i / NBPtr->CsPerDelay * MAX_BYTELANES_PER_CHANNEL + j]);
+ }
+ }
+ i = i + NBPtr->CsPerDelay;
+ }
+ }
+ }
+ }
+ }
+}
+
+
+
+
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/KB/mmflowkb.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/KB/mmflowkb.c
new file mode 100644
index 0000000..558bc62a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/KB/mmflowkb.c
@@ -0,0 +1,388 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmflowkb.c
+ *
+ * Main Memory initialization sequence for TN
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main/TN)
+ * @e \$Revision: 85859 $ @e \$Date: 2013-01-14 02:57:14 -0600 (Mon, 14 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnkb.h"
+#include "mt.h"
+#include "mmlvddr3.h"
+#include "cpuFamilyTranslation.h"
+#include "IdsF16KbAllService.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_MAIN_KB_MMFLOWKB_FILECODE
+/* features */
+#include "mftds.h"
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+extern OPTION_MEM_FEATURE_MAIN MemMS3Save;
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+MemMFlowKB (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function defines the memory initialization flow for
+ * systems that only support KB processors.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return AGESA_STATUS
+ * - AGESA_FATAL
+ * - AGESA_CRITICAL
+ * - AGESA_SUCCESS
+ */
+AGESA_STATUS
+MemMFlowKB (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ MEM_TECH_BLOCK *TechPtr;
+ MEM_DATA_STRUCT *MemPtr;
+ ID_INFO CallOutIdInfo;
+
+ NBPtr = MemMainPtr->NBPtr;
+ TechPtr = MemMainPtr->TechPtr;
+ MemPtr = MemMainPtr->MemPtr;
+
+ GetLogicalIdOfSocket (MemPtr->DiesPerSystem[BSP_DIE].SocketId, &(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid), &(MemPtr->StdHeader));
+ if (!MemNIsIdSupportedKB (&(MemPtr->DiesPerSystem[BSP_DIE].LogicalCpuid))) {
+ MemPtr->IsFlowControlSupported = FALSE;
+ return AGESA_FATAL;
+ } else {
+ MemPtr->IsFlowControlSupported = TRUE;
+ }
+
+ //----------------------------------------------------------------
+ // Memory Context Restore
+ //----------------------------------------------------------------
+ if (MemFeatMain.MemRestore (MemMainPtr)) {
+
+ // Memory DMI support
+ if (!MemFeatMain.MemDmi (MemMainPtr)) {
+ return AGESA_CRITICAL;
+ }
+
+ // Memory CRAT support
+ if (!MemFeatMain.MemCrat (MemMainPtr)) {
+ return AGESA_CRITICAL;
+ }
+
+ return AGESA_SUCCESS;
+ }
+
+ MemFInitTableDrive (&NBPtr[BSP_DIE], MTBeforeInitializeMCT);
+
+ //----------------------------------------------------------------
+ // Initialize MCT
+ //----------------------------------------------------------------
+ AGESA_TESTPOINT (TpProcMemInitializeMCT, &(MemMainPtr->MemPtr->StdHeader));
+ if (!NBPtr[BSP_DIE].InitializeMCT (&NBPtr[BSP_DIE])) {
+ return AGESA_FATAL;
+ }
+
+ //----------------------------------------------------------------
+ // Low voltage DDR3
+ //----------------------------------------------------------------
+ // Levelize DDR3 voltage based on socket, as each socket has its own voltage for dimms.
+ AGESA_TESTPOINT (TpProcMemLvDdr3, &(MemMainPtr->MemPtr->StdHeader));
+ if (!MemFeatMain.LvDDR3 (MemMainPtr)) {
+ return AGESA_FATAL;
+ }
+
+ //----------------------------------------------------------------
+ // Initialize DRAM and DCTs
+ //----------------------------------------------------------------
+ AGESA_TESTPOINT (TpProcMemInitMCT, &(MemMainPtr->MemPtr->StdHeader));
+ // Initialize Memory Controller and Dram
+ if (!NBPtr[BSP_DIE].InitMCT (&NBPtr[BSP_DIE])) {
+ return AGESA_FATAL; //fatalexit
+ }
+
+ MemFInitTableDrive (&NBPtr[BSP_DIE], MTBeforeDInit);
+
+ // Finalize target frequency
+ //------------------------------------------------
+ if (!MemMLvDdr3PerformanceEnhFinalize (MemMainPtr)) {
+ return AGESA_FATAL;
+ }
+
+ //------------------------------------------------
+ //------------------------------------------------
+ // Callout before Dram Init
+ //------------------------------------------------
+ AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeDramInit, &(MemMainPtr->MemPtr->StdHeader));
+ CallOutIdInfo.IdField.SocketId = NBPtr[BSP_DIE].MCTPtr->SocketId;
+ CallOutIdInfo.IdField.ModuleId = NBPtr[BSP_DIE].MCTPtr->DieId;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nCalling out to Platform BIOS on Socket %d, Module %d...\n", CallOutIdInfo.IdField.SocketId, CallOutIdInfo.IdField.ModuleId);
+ AgesaHookBeforeDramInit ((UINTN) CallOutIdInfo.IdInformation, MemMainPtr->MemPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nVDDIO = 1.%dV\n", (NBPtr[BSP_DIE].RefPtr->DDR3Voltage == VOLT1_5) ? 5 :
+ (NBPtr[BSP_DIE].RefPtr->DDR3Voltage == VOLT1_35) ? 35 :
+ (NBPtr[BSP_DIE].RefPtr->DDR3Voltage == VOLT1_25) ? 25 : 999);
+ AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeDramInit, &(NBPtr->MemPtr->StdHeader));
+
+ //-------------------------------------------------
+ // Do dram init and create memory map
+ //-------------------------------------------------
+ IDS_OPTION_HOOK (IDS_BEFORE_DRAM_INIT, &NBPtr[BSP_DIE], &(MemMainPtr->MemPtr->StdHeader));
+ NBPtr[BSP_DIE].StartupDCT (&NBPtr[BSP_DIE]);
+
+ // Create memory map
+ AGESA_TESTPOINT (TpProcMemSystemMemoryMapping, &(MemMainPtr->MemPtr->StdHeader));
+ if (!NBPtr[BSP_DIE].HtMemMapInit (&NBPtr[BSP_DIE])) {
+ return AGESA_FATAL;
+ }
+
+ //----------------------------------------------------
+ // If there is no dimm on the system, do fatal exit
+ //----------------------------------------------------
+ if (NBPtr[BSP_DIE].RefPtr->SysLimit == 0) {
+ PutEventLog (AGESA_FATAL, MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM, 0, 0, 0, 0, &(MemMainPtr->MemPtr->StdHeader));
+ return AGESA_FATAL;
+ }
+
+ //----------------------------------------------------------------
+ // CpuMemTyping
+ //----------------------------------------------------------------
+ AGESA_TESTPOINT (TpProcMemMtrrConfiguration, &(MemMainPtr->MemPtr->StdHeader));
+ if (!NBPtr[BSP_DIE].CpuMemTyping (&NBPtr[BSP_DIE])) {
+ return AGESA_FATAL;
+ }
+
+ //----------------------------------------------------------------
+ // Before Training Table values
+ //----------------------------------------------------------------
+ MemFInitTableDrive (&NBPtr[BSP_DIE], MTBeforeTrn);
+
+ //----------------------------------------------------------------
+ // Training
+ //----------------------------------------------------------------
+ MemMainPtr->mmSharedPtr->DimmExcludeFlag = TRAINING;
+ AGESA_TESTPOINT (TpProcMemDramTraining, &(MemMainPtr->MemPtr->StdHeader));
+ IDS_SKIP_HOOK (IDS_BEFORE_DQS_TRAINING, MemMainPtr, &(MemMainPtr->MemPtr->StdHeader)) {
+ if (!MemFeatMain.Training (MemMainPtr)) {
+ return AGESA_FATAL;
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd DQS training\n\n");
+
+ //----------------------------------------------------------------
+ // Configure DCT for normal operation
+ //----------------------------------------------------------------
+ MemNConfigureDctNormalKB (&NBPtr[BSP_DIE]);
+
+ //----------------------------------------------------------------
+ // Disable chipselects that fail training
+ //----------------------------------------------------------------
+ MemMainPtr->mmSharedPtr->DimmExcludeFlag = END_TRAINING;
+ MemFeatMain.ExcludeDIMM (MemMainPtr);
+ MemMainPtr->mmSharedPtr->DimmExcludeFlag = NORMAL;
+
+ //----------------------------------------------------------------
+ // OtherTiming
+ //----------------------------------------------------------------
+ AGESA_TESTPOINT (TpProcMemOtherTiming, &(MemMainPtr->MemPtr->StdHeader));
+ if (!NBPtr[BSP_DIE].OtherTiming (&NBPtr[BSP_DIE])) {
+ return AGESA_FATAL;
+ }
+
+ IEM_INSERT_CODE (IEM_LATE_DCT_CONFIG, IemLateDctConfigKB, (NBPtr));
+
+ //----------------------------------------------------------------
+ // After Training Table values
+ //----------------------------------------------------------------
+ MemFInitTableDrive (&NBPtr[BSP_DIE], MTAfterTrn);
+
+ //----------------------------------------------------------------
+ // Memory Clear
+ //----------------------------------------------------------------
+ AGESA_TESTPOINT (TpProcMemMemClr, &(MemMainPtr->MemPtr->StdHeader));
+ if (!MemFeatMain.MemClr (MemMainPtr)) {
+ return AGESA_FATAL;
+ }
+
+ //----------------------------------------------------------------
+ // Interleave banks
+ //----------------------------------------------------------------
+ if (NBPtr[BSP_DIE].FeatPtr->InterleaveBanks (&NBPtr[BSP_DIE])) {
+ if (NBPtr[BSP_DIE].MCTPtr->ErrCode == AGESA_FATAL) {
+ return AGESA_FATAL;
+ }
+ }
+
+ //----------------------------------------------------------------
+ // After Programming Interleave registers
+ //----------------------------------------------------------------
+ MemFInitTableDrive (&NBPtr[BSP_DIE], MTAfterInterleave);
+
+ //----------------------------------------------------------------
+ // Power Saving
+ //----------------------------------------------------------------
+ if (!MemNPowerSavingKB (&NBPtr[BSP_DIE])) {
+ return AGESA_FATAL;
+ }
+
+ //----------------------------------------------------------------
+ // ECC
+ //----------------------------------------------------------------
+ if (!MemFeatMain.InitEcc (MemMainPtr)) {
+ return AGESA_FATAL;
+ }
+
+ //----------------------------------------------------------------
+ // C6 Storage Allocation
+ //----------------------------------------------------------------
+ NBPtr[BSP_DIE].AllocateC6Storage (&NBPtr[BSP_DIE]);
+
+ //----------------------------------------------------------------
+ // UMA Allocation & UMAMemTyping
+ //----------------------------------------------------------------
+ AGESA_TESTPOINT (TpProcMemUMAMemTyping, &(MemMainPtr->MemPtr->StdHeader));
+ if (!MemFeatMain.UmaAllocation (MemMainPtr)) {
+ return AGESA_FATAL;
+ }
+
+ //----------------------------------------------------------------
+ // OnDimm Thermal
+ //----------------------------------------------------------------
+ if (NBPtr[BSP_DIE].FeatPtr->OnDimmThermal (&NBPtr[BSP_DIE])) {
+ if (NBPtr[BSP_DIE].MCTPtr->ErrCode == AGESA_FATAL) {
+ return AGESA_FATAL;
+ }
+ }
+
+ //----------------------------------------------------------------
+ // Finalize MCT
+ //----------------------------------------------------------------
+ if (!NBPtr[BSP_DIE].FinalizeMCT (&NBPtr[BSP_DIE])) {
+ return AGESA_FATAL;
+ }
+
+ //----------------------------------------------------------------
+ // After Finalize MCT
+ //----------------------------------------------------------------
+ MemFInitTableDrive (&NBPtr[BSP_DIE], MTAfterFinalizeMCT);
+
+ //----------------------------------------------------------------
+ // Memory Context Save
+ //----------------------------------------------------------------
+ MemFeatMain.MemSave (MemMainPtr);
+
+ //----------------------------------------------------------------
+ // Memory DMI support
+ //----------------------------------------------------------------
+ if (!MemFeatMain.MemDmi (MemMainPtr)) {
+ return AGESA_CRITICAL;
+ }
+
+ //----------------------------------------------------------------
+ // Memory CRAT support
+ //----------------------------------------------------------------
+ if (!MemFeatMain.MemCrat (MemMainPtr)) {
+ return AGESA_CRITICAL;
+ }
+
+ //----------------------------------------------------------------
+ // Save memory S3 data
+ //----------------------------------------------------------------
+ if (!MemFeatMain.MemS3Save (MemMainPtr)) {
+ return AGESA_CRITICAL;
+ }
+
+ //----------------------------------------------------------------
+ // Switch back to DCT 0 before sending control back
+ //----------------------------------------------------------------
+ NBPtr[BSP_DIE].SwitchDCT (&NBPtr[BSP_DIE], 0);
+
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mdef.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mdef.c
new file mode 100644
index 0000000..9d62c88
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mdef.c
@@ -0,0 +1,155 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mdef.c
+ *
+ * Memory Controller header file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "Filecode.h"
+#include "mm.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MDEF_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+MemMFlowDef (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+VOID
+memDefRet ( VOID );
+
+BOOLEAN
+memDefTrue ( VOID );
+
+BOOLEAN
+memDefFalse ( VOID );
+
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This is the default return function
+ */
+
+VOID
+memDefRet ( VOID )
+{
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function is the default return function that returns TRUE
+ *
+ */
+BOOLEAN
+memDefTrue ( VOID )
+{
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function is used in place of an un-supported function that returns FALSE.
+ *
+ */
+BOOLEAN
+memDefFalse ( VOID )
+{
+ return FALSE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This is the default return function for flow control
+ */
+AGESA_STATUS
+MemMFlowDef (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ MemMainPtr->MemPtr->IsFlowControlSupported = FALSE;
+ return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function is used in place of an un-supported function that returns AGESA_SUCCESS.
+ *
+ */
+AGESA_STATUS
+memDefRetSuccess ( VOID )
+{
+ return AGESA_SUCCESS;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/merrhdl.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/merrhdl.c
new file mode 100644
index 0000000..426ce58
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/merrhdl.c
@@ -0,0 +1,187 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * merrhdl.c
+ *
+ * Memory error handling
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "heapManager.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MERRHDL_FILECODE
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function handle errors occur in memory code.
+ *
+ *
+ * @param[in,out] *MCTPtr - pointer to DIE_STRUCT.
+ * @param[in,out] DCT - DCT that needs to be handled.
+ * @param[in,out] ChipSelMask - Chip select mask that needs to be handled
+ * @param[in,out] *StdHeader - pointer to AMD_CONFIG_PARAMS
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemErrHandle (
+ IN DIE_STRUCT *MCTPtr,
+ IN UINT8 DCT,
+ IN UINT16 ChipSelMask,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ BOOLEAN ErrorRecovery;
+ BOOLEAN IgnoreErr;
+ DCT_STRUCT *DCTPtr;
+ UINT8 CurrentDCT;
+ LOCATE_HEAP_PTR LocHeap;
+ MEM_NB_BLOCK *NBPtr;
+ MEM_MAIN_DATA_BLOCK mmData;
+
+ DCTPtr = MCTPtr->DctData;
+ ErrorRecovery = TRUE;
+ IgnoreErr = FALSE;
+ IDS_OPTION_HOOK (IDS_MEM_ERROR_RECOVERY, &ErrorRecovery, StdHeader);
+
+ if (ErrorRecovery) {
+ if (DCT == EXCLUDE_ALL_DCT) {
+ // Exclude all DCTs on a node
+ for (CurrentDCT = 0; CurrentDCT < MCTPtr->DctCount; CurrentDCT++) {
+ DCTPtr[CurrentDCT].Timings.CsTestFail = DCTPtr[CurrentDCT].Timings.CsPresent;
+ }
+ } else if (ChipSelMask == EXCLUDE_ALL_CHIPSEL) {
+ // Exclude the specified DCT
+ DCTPtr[DCT].Timings.CsTestFail = DCTPtr[DCT].Timings.CsPresent;
+ } else {
+ // Exclude the chip select that has been marked out
+ DCTPtr[DCT].Timings.CsTestFail |= ChipSelMask & DCTPtr[DCT].Timings.CsPresent;
+ IDS_OPTION_HOOK (IDS_LOADCARD_ERROR_RECOVERY, &DCTPtr[DCT], StdHeader);
+ }
+
+ // Exclude the failed dimm to recovery from error
+ if (MCTPtr->NodeMemSize != 0) {
+ LocHeap.BufferHandle = AMD_MEM_AUTO_HANDLE;
+ if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+ // NB block has already been constructed by main block.
+ // No need to construct it here.
+ NBPtr = (MEM_NB_BLOCK *)LocHeap.BufferPtr;
+ if (!NBPtr->SharedPtr->NodeMap[MCTPtr->NodeId].IsValid) {
+ // Memory map has not been calculated, no need to remap memory across node here.
+ // Only need to remap memory within the node.
+ NBPtr = &NBPtr[MCTPtr->NodeId];
+ NBPtr->FeatPtr->ExcludeDIMM (NBPtr);
+ } else {
+ // Need to remap memory across the whole system.
+ mmData.MemPtr = NBPtr->MemPtr;
+ mmData.mmSharedPtr = NBPtr->SharedPtr;
+ mmData.NBPtr = NBPtr;
+ mmData.TechPtr = (MEM_TECH_BLOCK *) (&NBPtr[NBPtr->MemPtr->DieCount]);
+ mmData.DieCount = NBPtr->MemPtr->DieCount;
+ if (!MemFeatMain.ExcludeDIMM (&mmData)) {
+ return FALSE;
+ }
+ }
+ }
+ // If allocation fails, that means the code is not running at BSP.
+ // Parallel training is in process.
+ // Remap for parallel training will be done when control returns to BSP.
+ }
+ return TRUE;
+ } else {
+ IDS_OPTION_HOOK (IDS_MEM_IGNORE_ERROR, &IgnoreErr, StdHeader);
+ if (IgnoreErr) {
+ return TRUE;
+ }
+ SetMemError (AGESA_FATAL, MCTPtr);
+ // ErrorRecovery is FALSE
+ return FALSE;
+ }
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/minit.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/minit.c
new file mode 100644
index 0000000..318165a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/minit.c
@@ -0,0 +1,149 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * minit.c
+ *
+ * Initializer support function
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "mu.h"
+#include "OptionMemory.h"
+#include "Ids.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MINIT_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern MEM_NB_SUPPORT memNBInstalled[];
+extern MEM_PLATFORM_CFG* memPlatformTypeInstalled[];
+extern UINT8 SizeOfNBInstalledTable;
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes the default parameter, function pointers, build options
+ * and SPD data for memory configuration
+ *
+ * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT
+ * @param[in,out] *PlatFormConfig - Platform profile/build option config structure
+ *
+ */
+VOID
+AmdMemInitDataStructDef (
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN OUT PLATFORM_CONFIGURATION *PlatFormConfig
+ )
+{
+ UINT8 p;
+ UINT8 i;
+ // We need a way of specifying default values for each particular northbridge
+ // family. We also need to make sure that the IBV knows which parameter struct
+ // is for which northbridge.
+ //----------------------------------------------------------------------------
+ AGESA_TESTPOINT (TpProcMemBeforeMemDataInit, &MemPtr->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_BEGINMEMBEFOREMEMDATAINIT, &MemPtr->StdHeader);
+
+ MemPtr->PlatFormConfig = PlatFormConfig;
+
+ //
+ // Initialize Default Parameters
+ //
+ MemNCmnInitDefaultsNb (MemPtr);
+ for ( i = 0; i < SizeOfNBInstalledTable; i++) {
+ if (memNBInstalled[i].MemNInitDefaults != NULL) {
+ memNBInstalled[i].MemNInitDefaults (MemPtr);
+ }
+ }
+
+ //----------------------------------------------------------------------------
+ // INITIALIZE PLATFORM SPECIFIC CONFIGURATION STRUCT
+ //----------------------------------------------------------------------------
+ AGESA_TESTPOINT (TpProcMemPlatformSpecificConfig, &MemPtr->StdHeader);
+ i = 0;
+ for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+ if (memPlatformTypeInstalled[i] != NULL) {
+ MemPtr->GetPlatformCfg[p] = memPlatformTypeInstalled[i];
+ i++;
+ } else {
+ MemPtr->GetPlatformCfg[p] = MemAGetPsCfgDef;
+ }
+ }
+
+ AGESA_TESTPOINT (TpProcMemAfterMemDataInit, &MemPtr->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_ENDMEMBEFOREMEMDATAINIT, &MemPtr->StdHeader);
+
+ MemPtr->ErrorHandling = MemErrHandle;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mm.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mm.c
new file mode 100644
index 0000000..a355741a1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mm.c
@@ -0,0 +1,253 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mm.c
+ *
+ * Main Memory Entrypoint file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MM_FILECODE
+/* features */
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function deallocates heap buffers that were allocated in AmdMemAuto
+ *
+ * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT
+ *
+ * @return AGESA_STATUS
+ * - AGESA_ALERT
+ * - AGESA_FATAL
+ * - AGESA_SUCCESS
+ * - AGESA_WARNING
+ */
+AGESA_STATUS
+MemAmdFinalize (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ )
+{
+ UINT8 Die;
+
+ for (Die = 0; Die < MemPtr->DieCount; Die++ ) {
+ HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_TRN_DATA_HANDLE, Die, 0, 0), &MemPtr->StdHeader);
+ HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, Die, 0, 0), &MemPtr->StdHeader);
+ }
+
+ HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_DIE_STRUCT_HANDLE, 0, 0, 0), &MemPtr->StdHeader);
+ HeapDeallocateBuffer (AMD_S3_SAVE_HANDLE, &MemPtr->StdHeader);
+ HeapDeallocateBuffer (AMD_MEM_SPD_HANDLE, &MemPtr->StdHeader);
+ HeapDeallocateBuffer (AMD_MEM_AUTO_HANDLE, &MemPtr->StdHeader);
+
+ return AGESA_SUCCESS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * MemSocketScan - Scan all nodes, recording the physical Socket number,
+ * Die Number (relative to the socket), and PCI Device address of each
+ * populated socket.
+ *
+ * This information is used by the northbridge block to map a dram
+ * channel on a particular DCT, on a particular CPU Die, in a particular
+ * socket to a the DRAM SPD Data for the DIMMS physically connected to
+ * that channel.
+ *
+ * Also, the customer socket map is populated with pointers to the
+ * appropriate channel structures, so that the customer can locate the
+ * appropriate channel configuration data.
+ *
+ * This socket scan will always result in Die 0 as the BSP.
+ *
+ * @param[in,out] *mmPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ */
+AGESA_STATUS
+MemSocketScan (
+ IN OUT MEM_MAIN_DATA_BLOCK *mmPtr
+ )
+{
+ MEM_DATA_STRUCT *MemPtr;
+ UINT8 DieIndex;
+ UINT8 DieCount;
+ UINT32 SocketId;
+ UINT32 DieId;
+ UINT8 Die;
+ PCI_ADDR Address;
+ AGESA_STATUS AgesaStatus;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ ASSERT (mmPtr != NULL);
+ ASSERT (mmPtr->MemPtr != NULL);
+ MemPtr = mmPtr->MemPtr;
+
+ //
+ // Count the number of dies in the system
+ //
+ DieCount = 0;
+ for (Die = 0; Die < MAX_NODES_SUPPORTED; Die++) {
+ if (GetSocketModuleOfNode ((UINT32)Die, &SocketId, &DieId, (VOID *)MemPtr)) {
+ DieCount++;
+ }
+ }
+ MemPtr->DieCount = DieCount;
+ mmPtr->DieCount = DieCount;
+
+ if (DieCount > 0) {
+ //
+ // Allocate buffer for DIE_STRUCTs
+ //
+ AllocHeapParams.RequestedBufferSize = ((UINT16)DieCount * sizeof (DIE_STRUCT));
+ AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DIE_STRUCT_HANDLE, 0, 0, 0);
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) == AGESA_SUCCESS) {
+ MemPtr->DiesPerSystem = (DIE_STRUCT *)AllocHeapParams.BufferPtr;
+ //
+ // Find SocketId, DieId, and PCI address of each node
+ //
+ DieIndex = 0;
+ for (Die = 0; Die < MAX_NODES_SUPPORTED; Die++) {
+ if (GetSocketModuleOfNode ((UINT32)Die, &SocketId, &DieId, (VOID *)MemPtr)) {
+ if (GetPciAddress ((VOID *)MemPtr, (UINT8)SocketId, (UINT8)DieId, &Address, &AgesaStatus)) {
+ MemPtr->DiesPerSystem[DieIndex].SocketId = (UINT8)SocketId;
+ MemPtr->DiesPerSystem[DieIndex].DieId = (UINT8)DieId;
+ MemPtr->DiesPerSystem[DieIndex].PciAddr.AddressValue = Address.AddressValue;
+
+ DieIndex++;
+ }
+ }
+ }
+ AgesaStatus = AGESA_SUCCESS;
+ } else {
+ ASSERT(FALSE); // Heap allocation failed for DIE_STRUCTs
+ AgesaStatus = AGESA_FATAL;
+ }
+ } else {
+ ASSERT(FALSE); // No die in the system
+ AgesaStatus = AGESA_FATAL;
+ }
+ return AgesaStatus;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets memory errors into MemDataStruct
+ *
+ *
+ * @param[in,out] *MCTPtr - Pointer to the DIE_STRUCT
+ * @param[in] Errorval - Error value to update
+ */
+
+VOID
+SetMemError (
+ IN AGESA_STATUS Errorval,
+ IN OUT DIE_STRUCT *MCTPtr
+ )
+{
+ if (MCTPtr->ErrCode < Errorval) {
+ MCTPtr->ErrCode = Errorval;
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function is default function for the fultion list
+ *
+ * @param[in,out] *pMemData - Pointer to the MEM_DATA_STRUCT
+ */
+VOID
+AmdMemFunctionListDef (
+ IN OUT VOID *pMemData
+ )
+{
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmConditionalPso.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmConditionalPso.c
new file mode 100644
index 0000000..56a769f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmConditionalPso.c
@@ -0,0 +1,695 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmConditionalPso.c
+ *
+ * Functions to support conditional entries in the Platform Specific Override Table
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MMCONDITIONALPSO_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#define PSO_TYPE 0
+#define PSO_LENGTH 1
+#define PSO_DATA 2
+
+typedef enum _PSO_STATE {
+ PSO_FIND_CONDITION = 100, // Searching for initial Condition statement
+ PSO_FIND_ACTION, // Searching for initial Action Statement
+ PSO_MATCH_ACTION, // Trying to find an action that matches the caller's request
+ PSO_CHECK_CONDITION, // Checking the condition that preceded the found action
+ PSO_DO_ACTION, // Performing Action
+ PSO_COMPLETE // Completed processing of this request
+} PSO_STATE;
+
+typedef struct _D3_CMP_CAL {
+ UINT32 D3Cmp0NCal :3;
+ UINT32 Reserved34 :2;
+ UINT32 D3Cmp0PCal :3;
+ UINT32 Reserved89 :2;
+ UINT32 D3Cmp1NCal :3;
+ UINT32 Reserved1314 :2;
+ UINT32 D3Cmp1PCal :3;
+ UINT32 Reserved1819 :2;
+ UINT32 D3Cmp2NCal :3;
+ UINT32 Reserved2324 :2;
+ UINT32 D3Cmp2PCal :3;
+ UINT32 Reserved2831 :2;
+} D3_CMP_CAL;
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+ STATIC
+ MemPSODoActionODT (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+ BOOLEAN
+ STATIC
+ MemPSODoActionAddrTmg (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+ BOOLEAN
+ STATIC
+ MemPSODoActionODCControl (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+ BOOLEAN
+ STATIC
+ MemPSODoActionSlewRate (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+BOOLEAN
+STATIC
+MemPSODoActionGetFreqLimit (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+BOOLEAN
+STATIC
+MemCheckRankType (
+ IN CH_DEF_STRUCT *CurrentChannel,
+ IN UINT16 RankType
+ );
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Process Conditional Platform Specific Overrides
+ *
+ * @param[in] PlatformMemoryConfiguration - Pointer to Platform config table
+ * @param[in] NBPtr - Pointer to Current NBBlock
+ * @param[in] PsoAction - Action type
+ * @param[in] Dimm - Dimm Number
+ *
+ * @return BOOLEAN - TRUE : Action was performed
+ * FALSE: Action was not performed
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemProcessConditionalOverrides (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 PsoAction,
+ IN UINT8 Dimm
+ )
+{
+ BOOLEAN Result;
+ MEM_TECH_BLOCK *TechPtr;
+ UINT8 *Buffer;
+ UINT8 *ConditionStartPtr;
+ UINT8 *ActionStartPtr;
+ UINT8 *SpdBufferPtr;
+ UINT8 i;
+ UINT8 DimmMask;
+ UINT8 CurDimmMask;
+ BOOLEAN Condition;
+ BOOLEAN TmpCond;
+ PSO_STATE State;
+ ASSERT (PlatformMemoryConfiguration != NULL);
+ ASSERT (NBPtr != NULL);
+ ASSERT ((PsoAction >= PSO_ACTION_MIN) && (PsoAction <= PSO_ACTION_MAX));
+ //
+ // Set up local data
+ //
+ TechPtr = NBPtr->TechPtr;
+ Buffer = PlatformMemoryConfiguration;
+ State = PSO_FIND_CONDITION;
+ ConditionStartPtr = NULL;
+ ActionStartPtr = NULL;
+ Condition = FALSE;
+ DimmMask = 0xFF;
+ CurDimmMask = 0xFF;
+ Result = FALSE;
+
+ if (Dimm != 0xFF) {
+ DimmMask = ( 1 << Dimm);
+ }
+ DimmMask &= (UINT8) (NBPtr->ChannelPtr->ChDimmValid & 0xFF);
+ if (DimmMask == 0) {
+ return Result;
+ }
+
+ //
+ // Search for Condition Entry
+ //
+ while (State != PSO_COMPLETE) {
+ switch (State) {
+ //
+ // Searching for initial Condition statement
+ //
+ case PSO_FIND_CONDITION:
+ ASSERT (Buffer != NULL);
+ while (Buffer[PSO_TYPE] != PSO_CONDITION_AND) {
+ //
+ // If end of table is reached, Change state to complete and break.
+ //
+ if (Buffer[PSO_TYPE] == PSO_END) {
+ State = PSO_COMPLETE;
+ break;
+ }
+ //
+ // Otherwise, increment Buffer Pointer to the next PSO entry.
+ //
+ Buffer += (Buffer[PSO_LENGTH] + 2);
+ }
+ //
+ // If Condition statement has been found, save the Condition Start Pointer,
+ // and change to next state
+ //
+ if (State != PSO_COMPLETE) {
+ ASSERT (Buffer != NULL);
+ State = PSO_FIND_ACTION;
+ ConditionStartPtr = Buffer;
+ Buffer += (Buffer[PSO_LENGTH] + 2);
+ }
+ break;
+ //
+ // Searching for an action that matches the caller's request
+ //
+ case PSO_FIND_ACTION:
+ ASSERT (Buffer != NULL);
+ while (Buffer[PSO_TYPE] != PsoAction) {
+ //
+ // If non-conditional entry, change state to complete and break.
+ //
+ if ((Buffer[PSO_TYPE] < CONDITIONAL_PSO_MIN) || (Buffer[PSO_TYPE] > CONDITIONAL_PSO_MAX)) {
+ State = PSO_COMPLETE;
+ break;
+ }
+ //
+ // Check for the Start of a new condition block
+ //
+ if (Buffer[PSO_TYPE] == PSO_CONDITION_AND) {
+ ConditionStartPtr = Buffer;
+ }
+ //
+ // Otherwise, increment buffer pointer to the next PSO entry.
+ //
+ Buffer += (Buffer[PSO_LENGTH] + 2);
+ }
+ //
+ // If Action statement has been found, Save the Action Start Pointer, Reset Buffer to Condition Start
+ // and Change to next state.
+ //
+ if (State != PSO_COMPLETE) {
+ State = PSO_CHECK_CONDITION;
+ ASSERT (Buffer != NULL);
+ ActionStartPtr = Buffer;
+ Buffer = ConditionStartPtr;
+ Condition = TRUE;
+ }
+ break;
+ //
+ // Checking the condition that preceded the found action
+ //
+ case PSO_CHECK_CONDITION:
+ ASSERT (Buffer != NULL);
+ //
+ // Point to the next Condition
+ //
+ Buffer += (Buffer[PSO_LENGTH] + 2);
+ ASSERT ((Buffer[PSO_TYPE] >= CONDITIONAL_PSO_MIN) && (Buffer[PSO_TYPE] <= CONDITIONAL_PSO_MAX));
+ //
+ // This section has already been checked for invalid statements so just exit on ACTION_xx
+ //
+ if ((Buffer[PSO_TYPE] >= PSO_ACTION_MIN) && (Buffer[PSO_TYPE] <= PSO_ACTION_MAX)) {
+ if (Condition) {
+ ASSERT (Buffer != NULL);
+ State = PSO_DO_ACTION; // Perform the Action
+ } else {
+ State = PSO_FIND_CONDITION; // Go back and look for another condition/action
+ }
+ Buffer = ActionStartPtr; // Restore Action Pointer
+ break;
+ }
+ switch (Buffer[PSO_TYPE]) {
+
+ case PSO_CONDITION_AND:
+ //
+ // Additional CONDITION_AND is ORed with Previous ones, so if Previous result is TRUE
+ // just restore action pointer and perform the action.
+ //
+ if (Condition) {
+ State = PSO_DO_ACTION;
+ Buffer = ActionStartPtr;
+ } else {
+ //
+ // If its false, Start over and evaluate next cond.
+ // reset the Current Dimm Mask
+ //
+ Condition = TRUE;
+ CurDimmMask = 0xFF;
+ }
+ break;
+
+ case PSO_CONDITION_LOC:
+ //
+ // Condition location
+ //
+ CurDimmMask = Buffer[4];
+ Condition &= ( ((Buffer[2] & (1 << (NBPtr->MCTPtr->SocketId))) != 0) &&
+ ((Buffer[3] & (1 << (NBPtr->ChannelPtr->ChannelID))) != 0) &&
+ ((CurDimmMask & DimmMask) != 0) );
+ break;
+
+ case PSO_CONDITION_SPD:
+ //
+ // Condition SPD
+ //
+ TmpCond = FALSE;
+ for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i ++) {
+ if ( ((DimmMask & CurDimmMask) & ((UINT16) (1 << i))) != 0) {
+ if (TechPtr->GetDimmSpdBuffer (TechPtr, &SpdBufferPtr, i)) {
+ TmpCond |= ( (SpdBufferPtr[Buffer[2]] & Buffer[3]) == Buffer[4]);
+ }
+ }
+ }
+ Condition &= TmpCond;
+ break;
+
+ case PSO_CONDITION_REG:
+ //
+ // Condition Register - unsupported at this time
+ //
+ break;
+
+ default:
+ ASSERT (FALSE);
+ } // End Condition Switch
+ break;
+
+ case PSO_DO_ACTION:
+ ASSERT (Buffer != NULL);
+ //
+ // Performing Action
+ //
+ if ((Buffer[PSO_TYPE] < PSO_ACTION_MIN) || (Buffer[PSO_TYPE] > PSO_ACTION_MAX)) {
+ State = PSO_COMPLETE;
+ }
+ if (Buffer[PSO_TYPE] == PsoAction) {
+ switch (Buffer[PSO_TYPE]) {
+ case PSO_ACTION_ODT:
+ Result = MemPSODoActionODT (NBPtr, &Buffer[PSO_DATA]);
+ break;
+ case PSO_ACTION_ADDRTMG:
+ Result = MemPSODoActionAddrTmg (NBPtr, &Buffer[PSO_DATA]);
+ break;
+ case PSO_ACTION_ODCCONTROL:
+ Result = MemPSODoActionODCControl (NBPtr, &Buffer[PSO_DATA]);
+ break;
+ case PSO_ACTION_SLEWRATE:
+ Result = MemPSODoActionSlewRate (NBPtr, &Buffer[PSO_DATA]);
+ break;
+ case PSO_ACTION_SPEEDLIMIT:
+ Result = MemPSODoActionGetFreqLimit (NBPtr, &Buffer[PSO_DATA]);
+ break;
+ case PSO_ACTION_REG:
+ break;
+ default:
+ ASSERT (FALSE);
+ } // End Action Switch
+ //
+ // If Action was performed, mark complete.
+ //
+ if (Result) {
+ State = PSO_COMPLETE;
+ }
+ }// End Action
+
+ //
+ // Point to the next PSO Entry
+ //
+ Buffer += (Buffer[PSO_LENGTH] + 2);
+ break;
+
+ case PSO_COMPLETE:
+ //
+ // Completed processing of this request
+ //
+ break;
+
+ default:
+ ASSERT (FALSE);
+ } // End State Switch
+
+ } // End While
+
+ return Result;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * Perform ODT Platform Override
+ *
+ * @param[in] NBPtr - Pointer to Current NBBlock
+ * @param[in] Buffer - Pointer to the Action Command Data (w/o Type and Len)
+ *
+ * @return BOOLEAN - TRUE : Action was performed
+ * FALSE: Action was not performed
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPSODoActionODT (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ BOOLEAN Result;
+ UINT32 Speed;
+ UINT8 Dimms;
+ UINT8 i;
+ UINT8 QR_Dimms;
+ Result = FALSE;
+ Speed = ((UINT32) 1 << (NBPtr->DCTPtr->Timings.Speed / 66));
+ Dimms = NBPtr->ChannelPtr->Dimms;
+ QR_Dimms = 0;
+ for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+ if (((NBPtr->ChannelPtr->DimmQrPresent & (UINT16) (1 << i)) != 0) && (i < 2)) {
+ QR_Dimms ++;
+ }
+ }
+ if ((Speed & ((UINT32 *) Buffer)[0]) != 0) {
+ if ((((UINT8) (1 << (Dimms - 1)) & Buffer[4]) != 0) || (Buffer[4] == ANY_NUM)) {
+ if (((QR_Dimms == 0) && (Buffer[5] == NO_DIMM)) ||
+ ((QR_Dimms > 0) && (((UINT8) (1 << (QR_Dimms - 1)) & Buffer[5]) != 0)) ||
+ (Buffer[5] == ANY_NUM)) {
+ NBPtr->PsPtr->DramTerm = Buffer[6];
+ NBPtr->PsPtr->QR_DramTerm = Buffer[7];
+ NBPtr->PsPtr->DynamicDramTerm = Buffer[8];
+ Result = TRUE;
+ IDS_HDT_CONSOLE (MEM_FLOW, " Platform Override: DramTerm:%02x, QRDramTerm:%02x, DynDramTerm:%02x\n", Buffer[6], Buffer[7], Buffer[8]);
+ }
+ }
+ }
+ return Result;
+ }
+
+ /* -----------------------------------------------------------------------------*/
+/**
+ * Perform Address Timing Platform Override
+ *
+ * @param[in] NBPtr - Pointer to Current NBBlock
+ * @param[in] Buffer - Pointer to the Action Command Data (w/o Type and Len)
+ *
+ * @return BOOLEAN - TRUE : Action was performed
+ * FALSE: Action was not performed
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPSODoActionAddrTmg (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ BOOLEAN Result;
+ CH_DEF_STRUCT *ChannelPtr;
+ UINT32 Speed;
+ UINT16 DimmConfig;
+
+ Result = FALSE;
+ ChannelPtr = NBPtr->ChannelPtr;
+ Speed = ((UINT32) 1 << (NBPtr->DCTPtr->Timings.Speed / 66));
+ DimmConfig = *(UINT16 *) &(Buffer[4]);
+
+ if ((Speed & ((UINT32 *) Buffer)[0]) != 0) {
+ if (MemCheckRankType (ChannelPtr, DimmConfig)) {
+ ChannelPtr->DctAddrTmg = *(UINT32*) &(Buffer[6]);
+ Result = TRUE;
+ IDS_HDT_CONSOLE (MEM_FLOW, " Platform Override: Address Timing:%08x\n", *(UINT32*) &(Buffer[6]));
+ }
+ }
+ return Result;
+ }
+
+ /* -----------------------------------------------------------------------------*/
+/**
+ * Perform Drive Strength Platform Override
+ *
+ * @param[in] NBPtr - Pointer to Current NBBlock
+ * @param[in] Buffer - Pointer to the Action Command Data (w/o Type and Len)
+ *
+ * @return BOOLEAN - TRUE : Action was performed
+ * FALSE: Action was not performed
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPSODoActionODCControl (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ BOOLEAN Result;
+ CH_DEF_STRUCT *ChannelPtr;
+ UINT32 Speed;
+ UINT16 DimmConfig;
+
+ Result = FALSE;
+ ChannelPtr = NBPtr->ChannelPtr;
+ Speed = ((UINT32) 1 << (NBPtr->DCTPtr->Timings.Speed / 66));
+ DimmConfig = *(UINT16 *) &(Buffer[4]);
+
+ if ((Speed & ((UINT32 *) Buffer)[0]) != 0) {
+ if (MemCheckRankType (ChannelPtr, DimmConfig)) {
+ ChannelPtr->DctOdcCtl = *(UINT32*) &(Buffer[6]);
+ Result = TRUE;
+ IDS_HDT_CONSOLE (MEM_FLOW, " Platform Override: ODC Control:%08x\n", *(UINT32*)&(Buffer[6]));
+ }
+ }
+ return Result;
+ }
+
+ /* -----------------------------------------------------------------------------*/
+/**
+ * Perform Slew Rate Platform Override
+ *
+ * @param[in] NBPtr - Pointer to Current NBBlock
+ * @param[in] Buffer - Pointer to the Action Command Data (w/o Type and Len)
+ *
+ * @return BOOLEAN - TRUE : Action was performed
+ * FALSE: Action was not performed
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPSODoActionSlewRate (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ BOOLEAN Result;
+ CH_DEF_STRUCT *ChannelPtr;
+ UINT32 Speed;
+ UINT16 DimmConfig;
+
+ Result = FALSE;
+ ChannelPtr = NBPtr->ChannelPtr;
+ Speed = ((UINT32) 1 << (NBPtr->DCTPtr->Timings.Speed / 66));
+ DimmConfig = *(UINT16 *) &(Buffer[4]);
+
+ if ((Speed & ((UINT32 *) Buffer)[0]) != 0) {
+ if (MemCheckRankType (ChannelPtr, DimmConfig)) {
+ MemNSetBitFieldNb (NBPtr, BFD3Cmp0NCal, ((D3_CMP_CAL *) &(Buffer[6]))->D3Cmp0NCal );
+ MemNSetBitFieldNb (NBPtr, BFD3Cmp0PCal, ((D3_CMP_CAL *) &(Buffer[6]))->D3Cmp0PCal );
+ MemNSetBitFieldNb (NBPtr, BFD3Cmp1NCal, ((D3_CMP_CAL *) &(Buffer[6]))->D3Cmp1NCal );
+ MemNSetBitFieldNb (NBPtr, BFD3Cmp1PCal, ((D3_CMP_CAL *) &(Buffer[6]))->D3Cmp1PCal );
+ MemNSetBitFieldNb (NBPtr, BFD3Cmp2NCal, ((D3_CMP_CAL *) &(Buffer[6]))->D3Cmp2NCal );
+ MemNSetBitFieldNb (NBPtr, BFD3Cmp2PCal, ((D3_CMP_CAL *) &(Buffer[6]))->D3Cmp2PCal );
+ Result = TRUE;
+ IDS_HDT_CONSOLE (MEM_FLOW, " Platform Override: Slew Rate:%08x\n", *(UINT32 *) &(Buffer[6]));
+ }
+ }
+ return Result;
+ }
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function overrides the POR supported speed for a specific config
+ *
+ * @param[in] NBPtr - Pointer to Current NBBlock
+ * @param[in] Buffer - Pointer to the Action Command Data (w/o Type and Len)
+ *
+ * @return BOOLEAN - TRUE : Action was performed
+ * FALSE: Action was not performed
+ *
+ */
+BOOLEAN
+STATIC
+MemPSODoActionGetFreqLimit (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ BOOLEAN Result;
+ CH_DEF_STRUCT *ChannelPtr;
+ DCT_STRUCT *DCTPtr;
+ UINT16 DimmConfig;
+ UINT16 SpeedLimit;
+
+ Result = FALSE;
+ ChannelPtr = NBPtr->ChannelPtr;
+ DCTPtr = NBPtr->DCTPtr;
+ DimmConfig = *(UINT16*) &(Buffer[0]);
+ SpeedLimit = 0;
+ //
+ // Match number of dimms, then Rank Type
+ //
+ if (ChannelPtr->Dimms == Buffer[2]) {
+ if (MemCheckRankType (ChannelPtr, DimmConfig)) {
+ //
+ // Select speed based on current voltage
+ //
+ if (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) {
+ SpeedLimit = *(UINT16*) &(Buffer[3]);
+ } else if (NBPtr->RefPtr->DDR3Voltage == VOLT1_25) {
+ SpeedLimit = *(UINT16*) &(Buffer[7]);
+ } else {
+ SpeedLimit = *(UINT16*) &(Buffer[5]);
+ }
+ //
+ // Set the Speed limit
+ //
+ if (DCTPtr->Timings.TargetSpeed > SpeedLimit) {
+ DCTPtr->Timings.TargetSpeed = SpeedLimit;
+ }
+ Result = TRUE;
+ IDS_HDT_CONSOLE (MEM_FLOW, " Platform Override: Max Memory Speed for Channel %d: %d\n", NBPtr->Channel, SpeedLimit);
+ }
+ }
+ return Result;
+}
+
+ /* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function matches a particular Rank Type Mask to the installed
+ * DIMM configuration on the provided channel.
+ *
+ * @param[in] *CurrentChannel Pointer to CH_DEF_STRUCT
+ * @param[in] RankType Mask of rank type to match
+ *
+ * @return BOOLEAN - TRUE : Rank types match
+ * FALSE: Rank types do not match
+ *
+ */
+BOOLEAN
+STATIC
+MemCheckRankType (
+ IN CH_DEF_STRUCT *CurrentChannel,
+ IN UINT16 RankType
+ )
+{
+ BOOLEAN Result;
+ UINT8 i;
+ UINT16 DIMMRankType;
+
+ DIMMRankType = MemAGetPsRankType (CurrentChannel);
+ Result = TRUE;
+ for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+ if ( ((DIMMRankType & (0x0F << (i << 2))) + (RankType & (0x0F << (i << 2)))) != 0) {
+ Result &= (((DIMMRankType & (0x0F << (i << 2))) & ( RankType & ( 0x0F << ( i << 2)))) != 0);
+ }
+ if (!Result) {
+ break;
+ }
+ }
+ return Result;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmEcc.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmEcc.c
new file mode 100644
index 0000000..acff719
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmEcc.c
@@ -0,0 +1,186 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmEcc.c
+ *
+ * Main Memory Feature implementation file for ECC Initialization
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 87201 $ @e \$Date: 2013-01-30 11:25:53 -0600 (Wed, 30 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "ma.h"
+#include "mfmemclr.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MMECC_FILECODE
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemMEcc (
+ IN OUT MEM_MAIN_DATA_BLOCK *mmPtr
+ );
+
+/*-----------------------------------------------------------------------------
+* EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *
+ *
+ * @param[in,out] *mmPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMEcc (
+ IN OUT MEM_MAIN_DATA_BLOCK *mmPtr
+ )
+{
+ UINT8 Die;
+ MEM_SHARED_DATA *SharedPtr;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ BOOLEAN RetVal;
+
+ RetVal = TRUE;
+ RefPtr = mmPtr->MemPtr->ParameterListPtr;
+ SharedPtr = mmPtr->mmSharedPtr;
+
+ //
+ // Run Northbridge-specific ECC initialization feature for each die.
+ //
+ SharedPtr->AllECC = FALSE;
+ if (RefPtr->EnableEccFeature) {
+ SharedPtr->AllECC = TRUE;
+ AGESA_TESTPOINT (TpProcMemEccInitialization, &(mmPtr->MemPtr->StdHeader));
+
+ for (Die = 0 ; Die < mmPtr->DieCount ; Die ++ ) {
+ mmPtr->NBPtr[Die].FeatPtr->CheckEcc (&(mmPtr->NBPtr[Die]));
+ RetVal &= (BOOLEAN) (mmPtr->NBPtr[Die].MCTPtr->ErrCode < AGESA_FATAL);
+ }
+ if (SharedPtr->AllECC == TRUE) {
+ RefPtr->GStatus[GsbAllECCDimms] = TRUE;
+ // Sync mem clear before setting scrub rate.
+ for (Die = 0; Die < mmPtr->DieCount; Die++) {
+ MemFMctMemClr_Sync (&(mmPtr->NBPtr[Die]));
+ }
+ }
+ }
+ // Scrubber control
+ for (Die = 0 ; Die < mmPtr->DieCount ; Die ++ ) {
+ mmPtr->NBPtr[Die].FeatPtr->InitEcc (&(mmPtr->NBPtr[Die]));
+ }
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function disable DRAM scrubber
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ */
+VOID
+MemMDisableScrubber (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Node;
+ MEM_SHARED_DATA *SharedPtr;
+ MEM_NB_BLOCK *NBArray;
+
+ SharedPtr = MemMainPtr->mmSharedPtr;
+ NBArray = MemMainPtr->NBPtr;
+ if (SharedPtr->AllECC == TRUE) {
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ NBArray[Node].MemNDisableScrubber (&NBArray[Node]);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function restore the settings of DRAM scrubber
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ */
+VOID
+MemMRestoreScrubber (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Node;
+ MEM_SHARED_DATA *SharedPtr;
+ MEM_NB_BLOCK *NBArray;
+
+ SharedPtr = MemMainPtr->mmSharedPtr;
+ NBArray = MemMainPtr->NBPtr;
+ if (SharedPtr->AllECC == TRUE) {
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ NBArray[Node].MemNRestoreScrubber (&NBArray[Node]);
+ }
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmExcludeDimm.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmExcludeDimm.c
new file mode 100644
index 0000000..ca599bd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmExcludeDimm.c
@@ -0,0 +1,244 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmExcludeDimm.c
+ *
+ * Main Memory Feature implementation file for RAS DIMM Exclude Feature
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mport.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MMEXCLUDEDIMM_FILECODE
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemMRASExcludeDIMM (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+/*-----------------------------------------------------------------------------
+* EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Check and disable Chip selects that fail training on all nodes.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMRASExcludeDIMM (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Node;
+ BOOLEAN IsEnabled;
+ BOOLEAN RetVal;
+ BOOLEAN IsChannelIntlvEnabled[MAX_NODES_SUPPORTED];
+ UINT8 FirstEnabledNode;
+ UINT32 BottomIO;
+ MEM_NB_BLOCK *NBPtr;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ S_UINT64 SMsr;
+
+ FirstEnabledNode = 0;
+ IsEnabled = FALSE;
+ RetVal = TRUE;
+ NBPtr = MemMainPtr->NBPtr;
+ RefPtr = NBPtr[BSP_DIE].RefPtr;
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ if (NBPtr[Node].FeatPtr->ExcludeDIMM (&NBPtr[Node])) {
+ if (!IsEnabled) {
+ // Record the first node that has exclude dimm enabled
+ FirstEnabledNode = Node;
+ IsEnabled = TRUE;
+ }
+ }
+ }
+
+ // Force memory address remap when we want to undo 1TB hoisting
+ if (NBPtr->SharedPtr->UndoHoistingAbove1TB) {
+ IsEnabled = TRUE;
+ }
+
+ if (IsEnabled) {
+ // Check if all nodes have all dimms excluded. If yes, fatal exit
+ NBPtr[BSP_DIE].SharedPtr->CurrentNodeSysBase = 0;
+ BottomIO = (NBPtr[BSP_DIE].RefPtr->BottomIo & 0xF8) << 8;
+ // If the first node that has excluded dimms does not have a system base smaller
+ // than bottomIO, then we don't need to reset the GStatus, as we don't need to
+ // remap memory hole.
+ if (NBPtr[FirstEnabledNode].MCTPtr->NodeSysBase < BottomIO) {
+ RefPtr->GStatus[GsbHWHole] = FALSE;
+ RefPtr->GStatus[GsbSpIntRemapHole] = FALSE;
+ RefPtr->GStatus[GsbSoftHole] = FALSE;
+ RefPtr->HoleBase = 0;
+ RefPtr->SysLimit = 0;
+ }
+ // If Node Interleaving has been executed before the remapping then we need to
+ // start from the first node.
+ // There may be a few senarios:
+ // 1. Node interleaving is not enabled before the remap, and still cannot be enabled after
+ // remap
+ // 2. Node interleaving cannot be enabled before the remap, but it can be enabled after
+ // remap
+ // 3. Node interleaving is enabled before the remap, but it cannot be enabled after the remap
+ if (NBPtr->SharedPtr->NodeIntlv.IsValid) {
+ FirstEnabledNode = 0;
+ }
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ IsChannelIntlvEnabled [Node] = FALSE;
+ // Check if node interleaving has been enabled on this node
+ // if yes, disable it.
+ if (NBPtr[Node].GetBitField (&NBPtr[Node], BFDramIntlvEn) != 0) {
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDramIntlvEn, 0);
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDramIntlvSel, 0);
+ }
+ if (Node >= FirstEnabledNode) {
+ // Remap memory on nodes with node number larger than the first node that has excluded dimms.
+ // If channel interleaving has already been enabled, need to disable it before remapping memory.
+ if (NBPtr[Node].GetBitField (&NBPtr[Node], BFDctSelIntLvEn) != 0) {
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelIntLvEn, 0);
+ IsChannelIntlvEnabled [Node] = TRUE;
+ }
+ NBPtr[Node].MCTPtr->Status[SbHWHole] = FALSE;
+ NBPtr[Node].MCTPtr->Status[SbSWNodeHole] = FALSE;
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelBaseAddr, 0);
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelHiRngEn, 0);
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelHi, 0);
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelBaseOffset, 0);
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDramHoleAddrReg, 0);
+ NBPtr[Node].HtMemMapInit (&NBPtr[Node]);
+ } else if (NBPtr[Node].MCTPtr->NodeMemSize != 0) {
+ // No change is needed in the memory map of this node.
+ // Need to adjust the current system base for other nodes processed later.
+ NBPtr[Node].SharedPtr->CurrentNodeSysBase = (NBPtr[Node].MCTPtr->NodeSysLimit + 1) & 0xFFFFFFF0;
+ RefPtr->SysLimit = NBPtr[Node].MCTPtr->NodeSysLimit;
+ // If the current node does not have the memory hole, then set DramHoleAddrReg to be 0.
+ // If memory hoisting is enabled later by other node, SyncAddrMapToAllNodes will set the base
+ // and DramMemHoistValid.
+ // Otherwise, do not change the register value, as we need to keep DramHoleOffset unchanged, as well
+ // DramHoleValid.
+ if (!NBPtr[Node].MCTPtr->Status[SbHWHole]) {
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDramHoleAddrReg, 0);
+ }
+ }
+ }
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ NBPtr[Node].SyncAddrMapToAllNodes (&NBPtr[Node]);
+ }
+
+ LibAmdMsrRead (TOP_MEM, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+ // Only when TOM is set can CpuMemTyping be re-run
+ if ((SMsr.hi != 0) || (SMsr.lo != 0)) {
+ if (RefPtr->SysLimit != 0) {
+ NBPtr[BSP_DIE].CpuMemTyping (&NBPtr[BSP_DIE]);
+
+ // When 1TB hoisting is not supported, TOP_MEM2 cannot exceed HT reserved region base.
+ if ((RefPtr->SysLimit >= HT_REGION_BASE_RJ16) && (NBPtr->SharedPtr->UndoHoistingAbove1TB)) {
+ SMsr.hi = HT_REGION_BASE_RJ16 >> (32 - 16);
+ SMsr.lo = HT_REGION_BASE_RJ16 << 16;
+ LibAmdMsrWrite (TOP_MEM2, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+ IDS_HDT_CONSOLE (MEM_FLOW, "TOP_MEM2: %08x0000\n", HT_REGION_BASE_RJ16);
+ RefPtr->Sub1THoleBase = HT_REGION_BASE_RJ16;
+ RefPtr->SysLimit = HT_REGION_BASE_RJ16 - 1;
+ }
+ }
+ }
+
+ // Re-run node interleaving if it has been exeucuted before the remap
+ if (NBPtr->SharedPtr->NodeIntlv.IsValid) {
+ MemFeatMain.InterleaveNodes (MemMainPtr);
+ }
+
+ // Re-enable channel interleaving if it was enabled before remapping memory
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ if (IsChannelIntlvEnabled [Node]) {
+ NBPtr[Node].FeatPtr->InterleaveChannels (&NBPtr[Node]);
+ }
+ }
+
+ // Reset UndoHoistingAbove1TB if it was previously set
+ NBPtr->SharedPtr->UndoHoistingAbove1TB = FALSE;
+ }
+
+ // if all dimms on all nodes are excluded, do fatal exit
+ if (RefPtr->SysLimit == 0) {
+ PutEventLog (AGESA_FATAL, MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_FATAL, NBPtr[BSP_DIE].MCTPtr);
+ ASSERT (FALSE);
+ }
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ RetVal &= (BOOLEAN) (NBPtr[Node].MCTPtr->ErrCode < AGESA_FATAL);
+ }
+
+ return RetVal;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmLvDdr3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmLvDdr3.c
new file mode 100644
index 0000000..ee3eec7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmLvDdr3.c
@@ -0,0 +1,300 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmLvDdr3.c
+ *
+ * Main Memory Feature implementation file for low voltage DDR3 support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mmlvddr3.h"
+#include "GeneralServices.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MMLVDDR3_FILECODE
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+* EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Find the common supported voltage on all nodes.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+STATIC BOOLEAN
+MemMLvDdr3 (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Node;
+ BOOLEAN RetVal;
+ BOOLEAN SecondLoop;
+ MEM_NB_BLOCK *NBPtr;
+ MEM_PARAMETER_STRUCT *ParameterPtr;
+ MEM_SHARED_DATA *mmSharedPtr;
+
+ NBPtr = MemMainPtr->NBPtr;
+ mmSharedPtr = MemMainPtr->mmSharedPtr;
+ ParameterPtr = MemMainPtr->MemPtr->ParameterListPtr;
+ mmSharedPtr->VoltageMap = 0xFF;
+ SecondLoop = FALSE;
+ RetVal = TRUE;
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ NBPtr[Node].FeatPtr->LvDdr3 (&NBPtr[Node]);
+ // Check if there is no common supported voltage
+ if ((mmSharedPtr->VoltageMap == 0) && !SecondLoop) {
+ // restart node loop by setting node to 0xFF
+ Node = 0xFF;
+ SecondLoop = TRUE;
+ }
+ }
+
+ if (mmSharedPtr->VoltageMap == 0) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nNo commonly supported VDDIO is found.\n");
+ PutEventLog (AGESA_WARNING, MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO, 0, 0, 0, 0, &(NBPtr[BSP_DIE].MemPtr->StdHeader));
+ SetMemError (AGESA_WARNING, NBPtr[BSP_DIE].MCTPtr);
+ // When there is no commonly supported VDDIO, use 1.35V as the temporal VDDIO
+ ParameterPtr->DDR3Voltage = VOLT1_35;
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nCommonly supported VDDIO is: %s%s%s.\n", ((mmSharedPtr->VoltageMap & 1) != 0) ? "1.5V, " : "", ((mmSharedPtr->VoltageMap & 2) != 0) ? "1.35V, " : "", ((mmSharedPtr->VoltageMap & 4) != 0) ? "1.25V" : "");
+ ParameterPtr->DDR3Voltage = CONVERT_ENCODED_TO_VDDIO (LibAmdBitScanReverse (mmSharedPtr->VoltageMap));
+ }
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ // Check if the voltage needs force to 1.5V
+ NBPtr[Node].FamilySpecificHook[ForceLvDimmVoltage] (&NBPtr[Node], MemMainPtr);
+
+ RetVal &= (BOOLEAN) (NBPtr[Node].MCTPtr->ErrCode < AGESA_FATAL);
+ }
+
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Find the common supported voltage on all nodes, taken into account of the
+ * user option for performance and power saving.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMLvDdr3PerformanceEnhPre (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Node;
+ BOOLEAN RetVal;
+ DIMM_VOLTAGE VDDIO;
+ MEM_NB_BLOCK *NBPtr;
+ MEM_PARAMETER_STRUCT *ParameterPtr;
+ MEM_SHARED_DATA *mmSharedPtr;
+ PLATFORM_POWER_POLICY PowerPolicy;
+ UINT8 *PowerPolicyPtr;
+
+ NBPtr = MemMainPtr->NBPtr;
+ mmSharedPtr = MemMainPtr->mmSharedPtr;
+ ParameterPtr = MemMainPtr->MemPtr->ParameterListPtr;
+ PowerPolicyPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MEMORY_POWER_POLICY, 0, 0, 0, NULL, NULL);
+ if (PowerPolicyPtr != NULL) {
+ PowerPolicy = (PLATFORM_POWER_POLICY) *PowerPolicyPtr;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nPlatform overrides memory power policy");
+ } else {
+ PowerPolicy = MemMainPtr->MemPtr->PlatFormConfig->PlatformProfile.PlatformPowerPolicy;
+ }
+
+ IDS_OPTION_HOOK (IDS_MEMORY_POWER_POLICY, &PowerPolicy, &NBPtr->MemPtr->StdHeader);
+ IDS_HDT_CONSOLE (MEM_FLOW, (PowerPolicy == Performance) ? "\nMaximize Performance\n" : "\nMaximize Battery Life\n");
+
+ if (ParameterPtr->DDR3Voltage != VOLT_INITIAL) {
+ mmSharedPtr->VoltageMap = VDDIO_DETERMINED;
+ PutEventLog (AGESA_WARNING, MEM_WARNING_INITIAL_DDR3VOLT_NONZERO, 0, 0, 0, 0, &(NBPtr[BSP_DIE].MemPtr->StdHeader));
+ SetMemError (AGESA_WARNING, NBPtr[BSP_DIE].MCTPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "Warning: Initial Value for VDDIO has been changed.\n");
+ RetVal = TRUE;
+ } else {
+ RetVal = MemMLvDdr3 (MemMainPtr);
+
+ VDDIO = ParameterPtr->DDR3Voltage;
+ if (NBPtr->IsSupported[PerformanceOnly] || ((PowerPolicy == Performance) && (mmSharedPtr->VoltageMap != 0))) {
+ // When there is no commonly supported voltage, do not optimize performance
+ // For cases where we can maximize performance, do the following
+ // When VDDIO is enforced, DDR3Voltage will be overriden by specific VDDIO
+ // So cases with DDR3Voltage left to be VOLT_UNSUPPORTED will be open to maximizing performance.
+ ParameterPtr->DDR3Voltage = VOLT_UNSUPPORTED;
+ }
+
+ IDS_OPTION_HOOK (IDS_ENFORCE_VDDIO, &(ParameterPtr->DDR3Voltage), &NBPtr->MemPtr->StdHeader);
+
+ if (ParameterPtr->DDR3Voltage != VOLT_UNSUPPORTED) {
+ // When Voltage is already determined, do not have further process to choose maximum frequency to optimize performance
+ mmSharedPtr->VoltageMap = VDDIO_DETERMINED;
+ IDS_HDT_CONSOLE (MEM_FLOW, "VDDIO is determined. No further optimization will be done.\n");
+ } else {
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ NBPtr[Node].MaxFreqVDDIO[VOLT1_5_ENCODED_VAL] = UNSUPPORTED_DDR_FREQUENCY;
+ NBPtr[Node].MaxFreqVDDIO[VOLT1_35_ENCODED_VAL] = UNSUPPORTED_DDR_FREQUENCY;
+ NBPtr[Node].MaxFreqVDDIO[VOLT1_25_ENCODED_VAL] = UNSUPPORTED_DDR_FREQUENCY;
+ }
+ // Reprogram the leveling result as temporal candidate
+ ParameterPtr->DDR3Voltage = VDDIO;
+ }
+ }
+
+ ASSERT (ParameterPtr->DDR3Voltage != VOLT_UNSUPPORTED);
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Finalize the VDDIO for the board for performance enhancement.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMLvDdr3PerformanceEnhFinalize (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Dct;
+ UINT8 Node;
+ UINT8 NodeCnt[VOLT1_25 + 1];
+ UINT8 MaxCnt;
+ MEM_NB_BLOCK *NBPtr;
+ MEM_PARAMETER_STRUCT *ParameterPtr;
+ MEM_SHARED_DATA *mmSharedPtr;
+ UINT8 CurrentVoltage;
+ DIMM_VOLTAGE Voltage;
+ UINT32 HighestFreq;
+
+ ParameterPtr = MemMainPtr->MemPtr->ParameterListPtr;
+ mmSharedPtr = MemMainPtr->mmSharedPtr;
+ NBPtr = MemMainPtr->NBPtr;
+
+ LibAmdMemFill (NodeCnt, 0, VOLT1_25_ENCODED_VAL + 1, &NBPtr->MemPtr->StdHeader);
+ if (mmSharedPtr->VoltageMap != VDDIO_DETERMINED) {
+ Voltage = ParameterPtr->DDR3Voltage;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nSearching for VDDIO that can maximize frequency: \n");
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ HighestFreq = 0;
+ // Find out what the highest frequency that can be reached is on this node across different voltage.
+ for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
+ if (HighestFreq < NBPtr[Node].MaxFreqVDDIO[CurrentVoltage]) {
+ HighestFreq = NBPtr[Node].MaxFreqVDDIO[CurrentVoltage];
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "Node%d: 1.5V -> %dMHz, 1.35V -> %dMHz, 1.25V -> %dMHz\n", Node, NBPtr[Node].MaxFreqVDDIO[VOLT1_5_ENCODED_VAL], NBPtr[Node].MaxFreqVDDIO[VOLT1_35_ENCODED_VAL], NBPtr[Node].MaxFreqVDDIO[VOLT1_25_ENCODED_VAL]);
+ // Figure out what voltage we can have when attaining the highest frequency.
+ for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
+ if (NBPtr[Node].MaxFreqVDDIO[CurrentVoltage] == HighestFreq) {
+ NodeCnt[CurrentVoltage] ++;
+ }
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "Number of nodes that can run at maximize performance: 1.5V -> %d Nodes 1.35V -> %d Nodes 1.25V -> %d Nodes.\n", NodeCnt[VOLT1_5_ENCODED_VAL], NodeCnt[VOLT1_35_ENCODED_VAL], NodeCnt[VOLT1_25_ENCODED_VAL]);
+ MaxCnt = 0;
+ // Use the VDDIO at which most nodes can run at higher frequency
+ for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
+ if (MaxCnt <= NodeCnt[CurrentVoltage]) {
+ MaxCnt = NodeCnt[CurrentVoltage];
+ ParameterPtr->DDR3Voltage = CONVERT_ENCODED_TO_VDDIO (CurrentVoltage);
+ }
+ }
+
+ ASSERT (ParameterPtr->DDR3Voltage != VOLT_UNSUPPORTED);
+
+ mmSharedPtr->VoltageMap = VDDIO_DETERMINED;
+ if (Voltage != ParameterPtr->DDR3Voltage) {
+ // Finalize frequency with updated finalized VDDIO
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ // Need to re-sync target speed and different VDDIO may cause different settings
+ NBPtr[Node].TechPtr->SpdGetTargetSpeed (NBPtr[Node].TechPtr);
+ for (Dct = 0; Dct < NBPtr[Node].DctCount; Dct++) {
+ NBPtr[Node].SwitchDCT (&(NBPtr[Node]), Dct);
+ if (NBPtr[Node].DCTPtr->Timings.CsEnabled != 0) {
+ if (!NBPtr[Node].PlatformSpec (&(NBPtr[Node]))) {
+ return FALSE;
+ }
+ }
+ }
+ }
+ }
+ }
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmMemClr.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmMemClr.c
new file mode 100644
index 0000000..bd04ed2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmMemClr.c
@@ -0,0 +1,126 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmMemclr.c
+ *
+ * Main Memory Feature implementation file for Memory Clear.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "mfmemclr.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMMEMCLR_FILECODE
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemMMctMemClr (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+/*-----------------------------------------------------------------------------
+* EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * Initiates/synchronizes memory clear on all nodes with Dram on it.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMMctMemClr (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Node;
+ UINT8 NodeCnt;
+ BOOLEAN RetVal;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = MemMainPtr->NBPtr;
+ NodeCnt = MemMainPtr->DieCount;
+ RetVal = TRUE;
+
+ IDS_OPTION_HOOK (IDS_BEFORE_MEMCLR, NULL, &NBPtr->MemPtr->StdHeader);
+
+ for (Node = 0; Node < NodeCnt; Node++) {
+ NBPtr->FamilySpecificHook[DisableMemHoleMapping] (&NBPtr[Node], NULL);
+ }
+
+ for (Node = 0; Node < NodeCnt; Node++) {
+ MemFMctMemClr_Init (&NBPtr[Node]);
+ }
+
+ for (Node = 0; Node < NodeCnt; Node++) {
+ MemFMctMemClr_Sync (&NBPtr[Node]);
+ RetVal &= (BOOLEAN) (NBPtr[Node].MCTPtr->ErrCode < AGESA_FATAL);
+ }
+
+ for (Node = 0; Node < NodeCnt; Node++) {
+ NBPtr->FamilySpecificHook[RestoreMemHoleMapping] (&NBPtr[Node], NULL);
+ }
+
+ return RetVal;
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmMemRestore.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmMemRestore.c
new file mode 100644
index 0000000..2cba133
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmMemRestore.c
@@ -0,0 +1,750 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmMemRestore.c
+ *
+ * Main Memory Feature implementation file for Node Interleaving
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 86704 $ @e \$Date: 2013-01-24 17:29:29 -0600 (Thu, 24 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "GeneralServices.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "heapManager.h"
+#include "cpuRegisters.h"
+#include "cpuPostInit.h"
+#include "cpuApicUtilities.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MMMEMRESTORE_FILECODE
+
+#define ST_PRE_ESR 0
+#define ST_POST_ESR 1
+#define ST_DONE 2
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemMCreateS3NbBlock (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr,
+ OUT S3_MEM_NB_BLOCK **S3NBPtr
+ );
+
+VOID
+MemMContextSave (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+BOOLEAN
+MemMContextRestore (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+BOOLEAN
+STATIC
+MemMDramInit (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+UINT32
+GetReducedMemBlockSize (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+VOID
+MemMReducedMemBlockSave (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr,
+ IN VOID *Storage,
+ OUT UINT32 *ActualBufferSize
+ );
+
+VOID
+MemMReducedMemBlockRestore (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr,
+ IN VOID *Storage
+ );
+
+BOOLEAN
+MemMS3Save (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+/*-----------------------------------------------------------------------------
+* EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+extern MEM_NB_SUPPORT memNBInstalled[];
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Determines the maximum amount of space required to store all reduced NB block
+ * and DCT block.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ */
+UINT32
+GetReducedMemBlockSize (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Node;
+ UINT8 Dct;
+ UINT32 MemBlockSize;
+ MEM_NB_BLOCK *NBPtr;
+
+ MemBlockSize = sizeof (REDUCED_MEM_BLOCK_HEAP_HEADER);
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ // Increase the size if the node is present
+ MemBlockSize += sizeof (REDUCED_NB_BLOCK);
+ NBPtr = &MemMainPtr->NBPtr[Node];
+
+ // Sync DCT Select bit with main NB block status
+ NBPtr->Dct = 0;
+ NBPtr->SetBitField (NBPtr, BFDctCfgSel, 0);
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct ++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ // Increase the size if memory is present on the DCT
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ MemBlockSize += sizeof (REDUCED_DCT_BLOCK);
+ }
+ // Switch back to DCT 0
+ NBPtr->SwitchDCT (NBPtr, 0);
+ }
+ }
+
+ return MemBlockSize;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Save all the required reduced NB blocks and DCT blocks.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ * @param[in] Storage - Beginning of the context buffer.
+ * @param[out] ActualBufferSize - Actual size used in saving the device list.
+ *
+ */
+VOID
+MemMReducedMemBlockSave (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr,
+ IN VOID *Storage,
+ OUT UINT32 *ActualBufferSize
+ )
+{
+ UINT8 Node;
+ UINT8 Dct;
+ MEM_NB_BLOCK *NBPtr;
+ REDUCED_MEM_BLOCK_HEAP_HEADER *MemBlockHeader;
+ REDUCED_NB_BLOCK *ReducedNBPtr;
+ REDUCED_DCT_BLOCK *ReducedDCTPtr;
+
+ // Initialzie the block pointers
+ MemBlockHeader = (REDUCED_MEM_BLOCK_HEAP_HEADER *)Storage;
+ MemBlockHeader->NumNodes = MemMainPtr->DieCount;
+ ReducedNBPtr = (REDUCED_NB_BLOCK *)&MemBlockHeader[1];
+ ReducedDCTPtr = (REDUCED_DCT_BLOCK *)&ReducedNBPtr[MemBlockHeader->NumNodes];
+
+ // Construct the reduced NB/DCT blocks
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ NBPtr = &MemMainPtr->NBPtr[Node];
+ ReducedNBPtr->NodeMemSize = NBPtr->MCTPtr->NodeMemSize;
+ ReducedNBPtr->NodeSysBase = NBPtr->MCTPtr->NodeSysBase;
+ ReducedNBPtr->NumDcts = 0;
+
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct ++) {
+ // Sync DCT Select bit with main NB block status
+ NBPtr->SetBitField (NBPtr, BFDctCfgSel, NBPtr->Dct);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ // Create a reduced block only if memory is present on the DCT
+ ReducedNBPtr->NumDcts ++;
+ ReducedDCTPtr->Dct = NBPtr->Dct;
+ ReducedDCTPtr->DctMemSize = NBPtr->DCTPtr->Timings.DctMemSize;
+ ReducedDCTPtr->EnabledChipSels = NBPtr->DCTPtr->EnabledChipSels;
+ ReducedDCTPtr->BankAddrMap = NBPtr->DCTPtr->BankAddrMap;
+ ReducedDCTPtr->BkIntDis = NBPtr->DCTPtr->BkIntDis;
+ ReducedDCTPtr ++;
+ }
+ // Switch back to DCT 0
+ NBPtr->SwitchDCT (NBPtr, 0);
+ }
+ ReducedNBPtr ++;
+ }
+
+ ASSERT ((UINT32) ((UINT8 *)ReducedDCTPtr - (UINT8 *)Storage) == GetReducedMemBlockSize (MemMainPtr));
+ *ActualBufferSize += (UINT32) ((UINT8 *)ReducedDCTPtr - (UINT8 *)Storage);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Restore all the required reduced NB blocks and DCT blocks.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ * @param[in] Storage - Beginning of the context buffer.
+ *
+ */
+VOID
+MemMReducedMemBlockRestore (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr,
+ IN VOID *Storage
+ )
+{
+ UINT8 Node;
+ UINT8 Dct;
+ UINT8 NumDcts;
+ MEM_NB_BLOCK *NBPtr;
+ DEVICE_BLOCK_HEADER *DeviceList;
+ REDUCED_MEM_BLOCK_HEAP_HEADER *MemBlockHeader;
+ REDUCED_NB_BLOCK *ReducedNBPtr;
+ REDUCED_DCT_BLOCK *ReducedDCTPtr;
+
+ // Initialzie the block pointers
+ DeviceList = (DEVICE_BLOCK_HEADER *) Storage;
+ MemBlockHeader = (REDUCED_MEM_BLOCK_HEAP_HEADER *) ((UINT8 *) DeviceList + DeviceList->NextBlockOffset);
+ ReducedNBPtr = (REDUCED_NB_BLOCK *)&MemBlockHeader[1];
+ ReducedDCTPtr = (REDUCED_DCT_BLOCK *)&ReducedNBPtr[MemBlockHeader->NumNodes];
+
+ // Restore the memory data from the reduced NB/DCT blocks
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ NBPtr = &MemMainPtr->NBPtr[Node];
+ NBPtr->MCTPtr->NodeMemSize = ReducedNBPtr->NodeMemSize;
+ NBPtr->MCTPtr->NodeSysBase = ReducedNBPtr->NodeSysBase;
+ NumDcts = ReducedNBPtr->NumDcts;
+ ASSERT (NumDcts <= NBPtr->DctCount);
+
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct ++) {
+ // Sync DCT Select bit with main NB block status
+ NBPtr->SetBitField (NBPtr, BFDctCfgSel, NBPtr->Dct);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+
+ if (NumDcts > 0 && NBPtr->Dct == ReducedDCTPtr->Dct) {
+ NBPtr->DCTPtr->Timings.DctMemSize = ReducedDCTPtr->DctMemSize;
+ NBPtr->DCTPtr->EnabledChipSels = ReducedDCTPtr->EnabledChipSels;
+ NBPtr->DCTPtr->BankAddrMap = ReducedDCTPtr->BankAddrMap;
+ NBPtr->DCTPtr->BkIntDis = ReducedDCTPtr->BkIntDis;
+ ReducedDCTPtr ++;
+ NumDcts --;
+ } else {
+ NBPtr->DCTPtr->Timings.DctMemSize = 0;
+ NBPtr->DCTPtr->EnabledChipSels = 0;
+ NBPtr->DCTPtr->BankAddrMap = 0;
+ NBPtr->DCTPtr->BkIntDis = FALSE;
+ }
+ // Switch back to DCT 0
+ NBPtr->SwitchDCT (NBPtr, 0);
+ }
+ ReducedNBPtr ++;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Check and save memory context if possible.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ */
+VOID
+MemMContextSave (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Node;
+ UINT8 i;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ LOCATE_HEAP_PTR LocHeap;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ DEVICE_BLOCK_HEADER *DeviceList;
+ AMD_CONFIG_PARAMS *StdHeader;
+ UINT32 BufferSize;
+ VOID *BufferOffset;
+ MEM_NB_BLOCK *NBArray;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ DESCRIPTOR_GROUP DeviceDescript[MAX_NODES_SUPPORTED];
+
+ NBArray = MemMainPtr->NBPtr;
+ RefPtr = NBArray[BSP_DIE].RefPtr;
+
+ if (RefPtr->SaveMemContextCtl) {
+ MemMDisableScrubber (MemMainPtr);
+
+ RefPtr->MemContext.NvStorage = NULL;
+ RefPtr->MemContext.NvStorageSize = 0;
+
+ // Make sure DQS training has occurred before saving memory context
+ if (!RefPtr->MemRestoreCtl) {
+ StdHeader = &MemMainPtr->MemPtr->StdHeader;
+
+ MemMCreateS3NbBlock (MemMainPtr, &S3NBPtr);
+ if (S3NBPtr != NULL) {
+ // Get the mask bit and the register list for node that presents
+ BufferSize = 0;
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ S3NBPtr->MemS3GetConPCIMask (S3NBPtr[Node].NBPtr, (VOID *)&DeviceDescript[Node]);
+ S3NBPtr->MemS3GetConMSRMask (S3NBPtr[Node].NBPtr, (VOID *)&DeviceDescript[Node]);
+ BufferSize += S3NBPtr->MemS3GetRegLstPtr (S3NBPtr[Node].NBPtr, (VOID *)&DeviceDescript[Node]);
+ }
+
+ // Base on the size of the device list, apply for a buffer for it.
+ AllocHeapParams.RequestedBufferSize = (UINT32) (BufferSize + sizeof (DEVICE_BLOCK_HEADER));
+ AllocHeapParams.BufferHandle = AMD_MEM_S3_DATA_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+ DeviceList = (DEVICE_BLOCK_HEADER *) AllocHeapParams.BufferPtr;
+ DeviceList->RelativeOrMaskOffset = (UINT16) AllocHeapParams.RequestedBufferSize;
+
+ // Copy device list on the stack to the heap.
+ BufferOffset = sizeof (DEVICE_BLOCK_HEADER) + AllocHeapParams.BufferPtr;
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ for (i = PRESELFREF; i <= POSTSELFREF; i ++) {
+ // Copy PCI device descriptor to the heap if it exists.
+ if (DeviceDescript[Node].PCIDevice[i].RegisterListID != 0xFFFFFFFF) {
+ LibAmdMemCopy (BufferOffset, &(DeviceDescript[Node].PCIDevice[i]), sizeof (PCI_DEVICE_DESCRIPTOR), StdHeader);
+ DeviceList->NumDevices ++;
+ BufferOffset = sizeof (PCI_DEVICE_DESCRIPTOR) + (UINT8 *)BufferOffset;
+ }
+ // Copy conditional PCI device descriptor to the heap if it exists.
+ if (DeviceDescript[Node].CPCIDevice[i].RegisterListID != 0xFFFFFFFF) {
+ LibAmdMemCopy (BufferOffset, &(DeviceDescript[Node].CPCIDevice[i]), sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR), StdHeader);
+ DeviceList->NumDevices ++;
+ BufferOffset = sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR) + (UINT8 *)BufferOffset;
+ }
+ // Copy MSR device descriptor to the heap if it exists.
+ if (DeviceDescript[Node].MSRDevice[i].RegisterListID != 0xFFFFFFFF) {
+ LibAmdMemCopy (BufferOffset, &(DeviceDescript[Node].MSRDevice[i]), sizeof (MSR_DEVICE_DESCRIPTOR), StdHeader);
+ DeviceList->NumDevices ++;
+ BufferOffset = sizeof (MSR_DEVICE_DESCRIPTOR) + (UINT8 *)BufferOffset;
+ }
+ // Copy conditional MSR device descriptor to the heap if it exists.
+ if (DeviceDescript[Node].CMSRDevice[i].RegisterListID != 0xFFFFFFFF) {
+ LibAmdMemCopy (BufferOffset, &(DeviceDescript[Node].PCIDevice[i]), sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR), StdHeader);
+ DeviceList->NumDevices ++;
+ BufferOffset = sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR) + (UINT8 *)BufferOffset;
+ }
+ }
+ }
+
+ // Determine size needed
+ BufferSize = GetWorstCaseContextSize (DeviceList, INIT_RESUME, StdHeader);
+ BufferSize += GetReducedMemBlockSize (MemMainPtr);
+ AllocHeapParams.RequestedBufferSize = BufferSize;
+ AllocHeapParams.BufferHandle = AMD_S3_SAVE_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+ // Save memory context
+ SaveDeviceListContext (DeviceList, AllocHeapParams.BufferPtr, INIT_RESUME, &BufferSize, StdHeader);
+ // Save pointer to the next block, namely the reduced memory block
+ DeviceList = (DEVICE_BLOCK_HEADER *)AllocHeapParams.BufferPtr;
+ DeviceList->NextBlockOffset = BufferSize;
+ // Save reduced memory block
+ MemMReducedMemBlockSave (MemMainPtr, AllocHeapParams.BufferPtr + BufferSize, &BufferSize);
+ RefPtr->MemContext.NvStorageSize = BufferSize;
+ }
+
+ HeapDeallocateBuffer (AMD_MEM_S3_DATA_HANDLE, StdHeader);
+ }
+ }
+ HeapDeallocateBuffer (AMD_MEM_S3_NB_HANDLE, StdHeader);
+
+ // Locate MemContext since it might have been shifted after deallocating
+ LocHeap.BufferHandle = AMD_S3_SAVE_HANDLE;
+ if (HeapLocateBuffer (&LocHeap, StdHeader) == AGESA_SUCCESS) {
+ RefPtr->MemContext.NvStorage = LocHeap.BufferPtr;
+ }
+ }
+ MemMRestoreScrubber (MemMainPtr);
+ }
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ NBArray[Node].FamilySpecificHook[AfterSaveRestore] (&NBArray[Node], &NBArray[Node]);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Check and restore memory context if possible.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - DQS timing restore succeeds.
+ * @return FALSE - DQS timing restore fails.
+ */
+BOOLEAN
+MemMContextRestore (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Node;
+ UINT8 Mode;
+ MEM_NB_BLOCK *NBArray;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ MEM_DATA_STRUCT *MemPtr;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ VOID *OrMaskPtr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ NBArray = MemMainPtr->NBPtr;
+ RefPtr = NBArray[BSP_DIE].RefPtr;
+ MemPtr = MemMainPtr->MemPtr;
+ Mode = 0;
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nMemRestoreCtl: %d\n", RefPtr->MemRestoreCtl);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nSaveMemContextCtl : %d\n", RefPtr->SaveMemContextCtl);
+
+ if (RefPtr->MemRestoreCtl) {
+ if (RefPtr->MemContext.NvStorage != NULL) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Mem Restore\n");
+ MemMCreateS3NbBlock (MemMainPtr, &S3NBPtr);
+ if (S3NBPtr != NULL) {
+ // Restore registers before exiting self refresh
+ RestorePreESRContext (&OrMaskPtr,
+ RefPtr->MemContext.NvStorage,
+ INIT_RESUME,
+ &(MemPtr->StdHeader));
+ MemMReducedMemBlockRestore (MemMainPtr, RefPtr->MemContext.NvStorage);
+ // Exit self refresh
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ // Call this function to sync DctSelCfg and NBPtr->Dct to avoid assert.
+ NBArray[Node].FamilySpecificHook[AfterSaveRestore] (&NBArray[Node], &NBArray[Node]);
+ }
+ if ((RefPtr->IsCapsuleMode && (AmdMemS3Resume (&(MemPtr->StdHeader)) == AGESA_SUCCESS)) ||
+ (!RefPtr->IsCapsuleMode && (MemMDramInit (MemMainPtr) == TRUE))) {
+ // Restore registers after exiting self refresh
+ RestorePostESRContext (OrMaskPtr,
+ RefPtr->MemContext.NvStorage,
+ INIT_RESUME,
+ &(MemPtr->StdHeader));
+
+ // If context restore is enabled, do memclr if ECC is enabled
+ if (!RefPtr->IsCapsuleMode && RefPtr->EnableEccFeature) {
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ if ((NBArray[Node].MCTPtr->NodeMemSize != 0) && (NBArray[Node].GetBitField (&NBArray[Node], BFDramEccEn) == 0)) {
+ break;
+ }
+ }
+ if (Node == MemMainPtr->DieCount) {
+ AGESA_TESTPOINT (TpProcMemMemClr, &(MemMainPtr->MemPtr->StdHeader));
+ MemFeatMain.MemClr (MemMainPtr);
+ }
+ }
+ } else {
+ RefPtr->MemRestoreCtl = FALSE;
+ }
+ } else {
+ RefPtr->MemRestoreCtl = FALSE;
+ }
+ HeapDeallocateBuffer (AMD_MEM_S3_NB_HANDLE, &(MemPtr->StdHeader));
+ } else {
+ IEM_SKIP_CODE (IEM_MEM_RESTORE) {
+ RefPtr->MemRestoreCtl = FALSE;
+ }
+ }
+ }
+
+ // Set the flag to skip memory S3 save when memory data is being restored
+ if (RefPtr->MemRestoreCtl) {
+ AllocHeapParams.RequestedBufferSize = 1;
+ AllocHeapParams.BufferHandle = AMD_SKIP_MEM_S3_SAVE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+
+ if (HeapAllocateBuffer (&AllocHeapParams, &(MemPtr->StdHeader)) != AGESA_SUCCESS) {
+ ASSERT (FALSE);
+ }
+
+ if (RefPtr->IsCapsuleMode) {
+ PutEventLog (AGESA_SUCCESS, MEM_EVENT_CAPSULE_IN_EFFECT, 0, 0, 0, 0, &(MemPtr->StdHeader));
+ } else {
+ PutEventLog (AGESA_SUCCESS, MEM_EVENT_CONTEXT_RESTORE_IN_EFFECT, 0, 0, 0, 0, &(MemPtr->StdHeader));
+ }
+ }
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ NBArray[Node].FamilySpecificHook[AfterSaveRestore] (&NBArray[Node], &NBArray[Node]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, RefPtr->MemRestoreCtl ? "Mem Restore Succeeds!\n" : "Mem Restore Fails!\n");
+ return RefPtr->MemRestoreCtl;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Save all memory related data for S3.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMS3Save (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ BOOLEAN SaveMemContextCtl;
+ BOOLEAN MemRestoreCtl;
+
+ RefPtr = MemMainPtr->NBPtr[BSP_DIE].RefPtr;
+
+ // If memory context has not been saved
+ if (RefPtr->MemContext.NvStorage == NULL) {
+ // Change memory context save and restore control to allow memory context to happen
+ SaveMemContextCtl = RefPtr->SaveMemContextCtl;
+ MemRestoreCtl = RefPtr->MemRestoreCtl;
+ RefPtr->SaveMemContextCtl = TRUE;
+ RefPtr->MemRestoreCtl = FALSE;
+
+ MemMContextSave (MemMainPtr);
+
+ // Restore the original control
+ RefPtr->SaveMemContextCtl = SaveMemContextCtl;
+ RefPtr->MemRestoreCtl = MemRestoreCtl;
+
+ if (RefPtr->MemContext.NvStorage == NULL) {
+ // Memory context cannot be saved succesfully
+ ASSERT (FALSE);
+ return FALSE;
+ }
+ }
+
+ // Allocate heap for memory S3 data to pass to main AMDS3Save
+ // Apply for 4 bytes more than the size of the data buffer to store the size of data buffer
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nSave memory S3 data in heap\n");
+ AllocHeapParams.RequestedBufferSize = RefPtr->MemContext.NvStorageSize + 4;
+ AllocHeapParams.BufferHandle = AMD_MEM_S3_SAVE_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+
+ if (HeapAllocateBuffer (&AllocHeapParams, &(MemMainPtr->MemPtr->StdHeader)) == AGESA_SUCCESS) {
+ LibAmdMemCopy (AllocHeapParams.BufferPtr + 4, RefPtr->MemContext.NvStorage, RefPtr->MemContext.NvStorageSize, &(MemMainPtr->MemPtr->StdHeader));
+ *(UINT32 *) AllocHeapParams.BufferPtr = RefPtr->MemContext.NvStorageSize;
+ return TRUE;
+ } else {
+ ASSERT (FALSE);
+ return FALSE;
+ }
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * This function does dram init based on register value
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ *
+ */
+BOOLEAN
+STATIC
+MemMDramInit (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Node;
+ UINT8 Dct;
+ MEM_NB_BLOCK *NBArray;
+ MEM_NB_BLOCK *NBPtr;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ BIT_FIELD_NAME CsBitField;
+ ID_INFO CallOutIdInfo;
+ BOOLEAN RetVal;
+
+ RefPtr = MemMainPtr->NBPtr[BSP_DIE].RefPtr;
+ NBArray = MemMainPtr->NBPtr;
+ RetVal = TRUE;
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ NBPtr = &NBArray[Node];
+
+ // When memory pstate is enabled, change MemPstateStage flag so registers won't be programmed twice
+ if (NBPtr->MemPstateStage == MEMORY_PSTATE_1ST_STAGE) {
+ NBPtr->MemPstateStage = MEMORY_PSTATE_S3_STAGE;
+ }
+
+ // Get dimm population info
+ NBPtr->TechPtr->DimmPresence (NBPtr->TechPtr);
+ NBPtr->MemNPlatformSpecificFormFactorInitNb (NBPtr);
+
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct ++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ for (CsBitField = BFCSBaseAddr0Reg; CsBitField <= BFCSBaseAddr7Reg; CsBitField ++) {
+ if ((NBPtr->GetBitField (NBPtr, CsBitField) & 5) != 0) {
+ // Need this variable for Dram init
+ NBPtr->DCTPtr->Timings.CsPresent |= (UINT16)1 << (CsBitField - BFCSBaseAddr0Reg);
+ }
+ }
+
+ // Enable memory clock
+ if (NBPtr->GetBitField (NBPtr, BFDisDramInterface) == 0) {
+ NBPtr->SetBitField (NBPtr, BFMemClkFreqVal, 1);
+ while (NBPtr->GetBitField (NBPtr, BFFreqChgInProg) != 0) {}
+ }
+
+ // Get memory clock speed
+ NBPtr->DCTPtr->Timings.Speed = MemNGetMemClkFreqUnb (NBPtr, (UINT8) NBPtr->GetBitField (NBPtr, BFMemClkFreq));
+ NBPtr->DCTPtr->Timings.TargetSpeed = NBPtr->DCTPtr->Timings.Speed;
+
+ // Call platform specific parameter processing function as lots of variable populated here
+ // will be used during dram init
+ if (NBPtr->GetBitField (NBPtr, BFDisDramInterface) == 0) {
+ if (!NBPtr->PsPtr->MemPDoPs (NBPtr)) {
+ IDS_ERROR_TRAP;
+ }
+ }
+ }
+
+ // Callout before Dram Init
+ AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeDramInit, &(MemMainPtr->MemPtr->StdHeader));
+ CallOutIdInfo.IdField.SocketId = NBPtr->MCTPtr->SocketId;
+ CallOutIdInfo.IdField.ModuleId = NBPtr->MCTPtr->DieId;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nCalling out to Platform BIOS on Socket %d, Module %d...\n", CallOutIdInfo.IdField.SocketId, CallOutIdInfo.IdField.ModuleId);
+ AgesaHookBeforeDramInit ((UINTN) CallOutIdInfo.IdInformation, MemMainPtr->MemPtr);
+ NBPtr->FamilySpecificHook[AmpVoltageDisp] (NBPtr, NULL);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nVDDIO = 1.%dV\n", (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) ? 5 :
+ (NBPtr->RefPtr->DDR3Voltage == VOLT1_35) ? 35 :
+ (NBPtr->RefPtr->DDR3Voltage == VOLT1_25) ? 25 : 999);
+ AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeDramInit, &(NBPtr->MemPtr->StdHeader));
+
+ // Do Dram init
+ AGESA_TESTPOINT (TpProcMemDramInit, &(NBPtr->MemPtr->StdHeader));
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nMemClkFreq: %d MHz\n", NBPtr->DCTPtr->Timings.Speed);
+ NBPtr->FeatPtr->DramInit (NBPtr->TechPtr);
+
+ // Print out hob info
+ IDS_HDT_CONSOLE (MEM_FLOW, "UmaSize: %x\n", NBPtr->RefPtr->UmaSize);
+ IDS_HDT_CONSOLE (MEM_FLOW, "UmaBase: %x\n", NBPtr->RefPtr->UmaBase);
+ IDS_HDT_CONSOLE (MEM_FLOW, "UmaMode: %x\n", NBPtr->RefPtr->UmaMode);
+ IDS_HDT_CONSOLE (MEM_FLOW, "Sub4GCacheTop: %x\n", NBPtr->RefPtr->Sub4GCacheTop);
+ IDS_HDT_CONSOLE (MEM_FLOW, "SysLimit: %x\n\n", NBPtr->RefPtr->SysLimit);
+
+ if (NBPtr->MCTPtr->ErrCode == AGESA_FATAL) {
+ RetVal = FALSE;
+ }
+ }
+
+ return RetVal;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Create S3 NB Block.
+ *
+ * @param[in,out] MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ * @param[out] S3NBPtr - Pointer to the S3 NB Block pointer
+ *
+ */
+VOID
+STATIC
+MemMCreateS3NbBlock (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr,
+ OUT S3_MEM_NB_BLOCK **S3NBPtr
+ )
+{
+ UINT8 Node;
+ UINT8 i;
+ MEM_NB_BLOCK *NBArray;
+ MEM_NB_BLOCK *DummyNBs;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ NBArray = MemMainPtr->NBPtr;
+
+ *S3NBPtr = NULL;
+
+ // Allocate heap for S3 NB Blocks
+ AllocHeapParams.RequestedBufferSize = (MemMainPtr->DieCount * (sizeof (S3_MEM_NB_BLOCK) + sizeof (MEM_NB_BLOCK)));
+ AllocHeapParams.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, &(MemMainPtr->MemPtr->StdHeader)) == AGESA_SUCCESS) {
+ *S3NBPtr = (S3_MEM_NB_BLOCK *) AllocHeapParams.BufferPtr;
+ DummyNBs = (MEM_NB_BLOCK *) (AllocHeapParams.BufferPtr + MemMainPtr->DieCount * sizeof (S3_MEM_NB_BLOCK));
+
+ // Initialize S3 NB Blocks
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ (*S3NBPtr)[Node].NBPtr = &DummyNBs[Node];
+
+ for (i = 0; memNBInstalled[i].MemS3ResumeConstructNBBlock != 0; i++) {
+ if (memNBInstalled[i].MemS3ResumeConstructNBBlock (&(*S3NBPtr)[Node], NBArray[BSP_DIE].MemPtr, Node)) {
+ (*S3NBPtr)[Node].NBPtr->RefPtr = NBArray[Node].RefPtr;
+ break;
+ }
+ };
+ if (memNBInstalled[i].MemS3ResumeConstructNBBlock == 0) {
+ *S3NBPtr = NULL;
+ break;
+ }
+ }
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmNodeInterleave.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmNodeInterleave.c
new file mode 100644
index 0000000..b474d64
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmNodeInterleave.c
@@ -0,0 +1,146 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmNodeInterleave.c
+ *
+ * Main Memory Feature implementation file for Node Interleaving
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMNODEINTERLEAVE_FILECODE
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemMInterleaveNodes (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+/*-----------------------------------------------------------------------------
+* EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Check and enable node interleaving on all nodes.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMInterleaveNodes (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Node;
+ UINT8 NodeCnt;
+ BOOLEAN RetVal;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = MemMainPtr->NBPtr;
+ NodeCnt = 0;
+ RetVal = TRUE;
+
+ if (NBPtr->RefPtr->EnableNodeIntlv) {
+ if (!MemFeatMain.MemClr (MemMainPtr)) {
+ PutEventLog (AGESA_WARNING, MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_WARNING, NBPtr->MCTPtr);
+ return FALSE;
+ }
+
+ MemMainPtr->mmSharedPtr->NodeIntlv.IsValid = FALSE;
+ MemMainPtr->mmSharedPtr->NodeIntlv.NodeIntlvSel = 0;
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ if (!NBPtr[Node].FeatPtr->CheckInterleaveNodes (&NBPtr[Node])) {
+ break;
+ }
+ if (NBPtr[Node].MCTPtr->NodeMemSize != 0) {
+ NodeCnt ++;
+ }
+ }
+
+ if ((Node == MemMainPtr->DieCount) && (NodeCnt != 0) && ((NodeCnt & (NodeCnt - 1)) == 0)) {
+ MemMainPtr->mmSharedPtr->NodeIntlv.NodeCnt = NodeCnt;
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ if (NBPtr[Node].MCTPtr->NodeMemSize != 0) {
+ NBPtr[Node].FeatPtr->InterleaveNodes (&NBPtr[Node]);
+ }
+ }
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ NBPtr[Node].SyncAddrMapToAllNodes (&NBPtr[Node]);
+ RetVal &= (BOOLEAN) (NBPtr[Node].MCTPtr->ErrCode < AGESA_FATAL);
+ }
+ } else {
+ //
+ // If all nodes cannot be interleaved
+ //
+ PutEventLog (AGESA_WARNING, MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_WARNING, NBPtr->MCTPtr);
+ }
+ }
+
+ return RetVal;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmOnlineSpare.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmOnlineSpare.c
new file mode 100644
index 0000000..91b38b4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmOnlineSpare.c
@@ -0,0 +1,165 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmOnlineSpare.c
+ *
+ * Main Memory Feature implementation file for Node Interleaving
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMONLINESPARE_FILECODE
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemMOnlineSpare (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+/*-----------------------------------------------------------------------------
+* EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Check and enable online spare on all nodes.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMOnlineSpare (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT8 Node;
+ BOOLEAN IsEnabled;
+ UINT8 FirstEnabledNode;
+ UINT32 BottomIO;
+ BOOLEAN RetVal;
+ MEM_NB_BLOCK *NBPtr;
+ MEM_PARAMETER_STRUCT *RefPtr;
+
+ AGESA_TESTPOINT (TpProcMemOnlineSpareInit, &(MemMainPtr->MemPtr->StdHeader));
+ FirstEnabledNode = 0;
+ IsEnabled = FALSE;
+ RetVal = TRUE;
+ NBPtr = MemMainPtr->NBPtr;
+ RefPtr = NBPtr[BSP_DIE].RefPtr;
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ if (NBPtr[Node].FeatPtr->OnlineSpare (&NBPtr[Node])) {
+ if (!IsEnabled) {
+ // Record the first node that has spared dimm enabled
+ FirstEnabledNode = Node;
+ IsEnabled = TRUE;
+ }
+ }
+ }
+
+ if (IsEnabled) {
+ NBPtr[BSP_DIE].SharedPtr->CurrentNodeSysBase = 0;
+ BottomIO = (NBPtr[BSP_DIE].RefPtr->BottomIo & 0xF8) << 8;
+ // If the first node that has spared dimms does not have a system base smaller
+ // than bottomIO, then we don't need to reset the GStatus, as we don't need to
+ // remap memory hole.
+ if (NBPtr[FirstEnabledNode].MCTPtr->NodeSysBase < BottomIO) {
+ RefPtr->GStatus[GsbHWHole] = FALSE;
+ RefPtr->GStatus[GsbSpIntRemapHole] = FALSE;
+ RefPtr->GStatus[GsbSoftHole] = FALSE;
+ RefPtr->HoleBase = 0;
+ }
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ if (Node >= FirstEnabledNode) {
+ // Remap memory on nodes with node number larger than the first node that has spared dimms.
+ NBPtr[Node].MCTPtr->Status[SbHWHole] = FALSE;
+ NBPtr[Node].MCTPtr->Status[SbSWNodeHole] = FALSE;
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelBaseAddr, 0);
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelHiRngEn, 0);
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelHi, 0);
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDctSelBaseOffset, 0);
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDramHoleAddrReg, 0);
+ NBPtr[Node].HtMemMapInit (&NBPtr[Node]);
+ } else {
+ // No change is needed in the memory map of this node.
+ // Need to adjust the current system base for other nodes processed later.
+ NBPtr[Node].SharedPtr->CurrentNodeSysBase = (NBPtr[Node].MCTPtr->NodeSysLimit + 1) & 0xFFFFFFF0;
+ // If the current node does not have the memory hole, then set DramHoleAddrReg to be 0.
+ // If memory hoisting is enabled later by other node, SyncAddrMapToAllNodes will set the base
+ // and DramMemHoistValid.
+ // Otherwise, do not change the register value, as we need to keep DramHoleOffset unchanged, as well
+ // DramHoleValid.
+ if (!NBPtr[Node].MCTPtr->Status[SbHWHole]) {
+ NBPtr[Node].SetBitField (&NBPtr[Node], BFDramHoleAddrReg, 0);
+ }
+ }
+ }
+
+ for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
+ NBPtr[Node].SyncAddrMapToAllNodes (&NBPtr[Node]);
+ RetVal &= (BOOLEAN) (NBPtr[Node].MCTPtr->ErrCode < AGESA_FATAL);
+ }
+ NBPtr[BSP_DIE].CpuMemTyping (&NBPtr[BSP_DIE]);
+ }
+ return RetVal;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmParallelTraining.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmParallelTraining.c
new file mode 100644
index 0000000..375344e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmParallelTraining.c
@@ -0,0 +1,288 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmNodeInterleave.c
+ *
+ * Main Memory Feature implementation file for Node Interleaving
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "cpuApicUtilities.h"
+#include "GeneralServices.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "ma.h"
+#include "mu.h"
+#include "mfParallelTraining.h"
+#include "GeneralServices.h"
+#include "heapManager.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_MAIN_MMPARALLELTRAINING_FILECODE
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemMParallelTraining (
+ IN OUT MEM_MAIN_DATA_BLOCK *mmPtr
+ );
+
+/*-----------------------------------------------------------------------------
+* EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ *
+ *
+ * @param[in,out] *mmPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMParallelTraining (
+ IN OUT MEM_MAIN_DATA_BLOCK *mmPtr
+ )
+{
+ AMD_CONFIG_PARAMS *StdHeader;
+ MEM_DATA_STRUCT *MemPtr;
+ MEM_NB_BLOCK *NBPtr;
+ DIE_INFO TrainInfo[MAX_NODES_SUPPORTED];
+ AP_DATA_TRANSFER ReturnData;
+ AGESA_STATUS Status;
+ UINT8 ApSts;
+ UINT8 Die;
+ UINT8 Socket;
+ UINT32 Module;
+ UINT32 LowCore;
+ UINT32 HighCore;
+ UINT32 Time;
+ UINT32 TimeOut;
+ UINT32 TargetApicId;
+ BOOLEAN StillTraining;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ UINT8 *BufferPtr;
+ BOOLEAN TimeoutEn;
+
+ NBPtr = mmPtr->NBPtr;
+ MemPtr = mmPtr->MemPtr;
+ StdHeader = &(mmPtr->MemPtr->StdHeader);
+ Time = 0;
+ TimeOut = PARALLEL_TRAINING_TIMEOUT;
+ TimeoutEn = TRUE;
+ IDS_TIMEOUT_CTL (&TimeoutEn);
+
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart parallel training\n");
+ AGESA_TESTPOINT (TpProcMemBeforeAnyTraining, StdHeader);
+ //
+ // Initialize Training Info Array
+ //
+ for (Die = 0; Die < mmPtr->DieCount; Die ++) {
+ Socket = TrainInfo[Die].Socket = NBPtr[Die].MCTPtr->SocketId;
+ Module = NBPtr[Die].MCTPtr->DieId;
+ GetGivenModuleCoreRange (Socket, Module, &LowCore, &HighCore, StdHeader);
+ TrainInfo[Die].Core = (UINT8) (LowCore & 0x000000FF);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tLaunch core %d of socket %d\n", LowCore, Socket);
+ TrainInfo[Die].Training = FALSE;
+ }
+ //
+ // Start Training on Each remote die.
+ //
+ for (Die = 0; Die < mmPtr->DieCount; Die ++ ) {
+ if (Die != BSP_DIE) {
+ NBPtr[Die].BeforeDqsTraining (&(mmPtr->NBPtr[Die]));
+ if (NBPtr[Die].MCTPtr->NodeMemSize != 0) {
+ if (!NBPtr[Die].FeatPtr->Training (&(mmPtr->NBPtr[Die]))) {
+ // Fail to launch code on AP
+ PutEventLog (AGESA_ERROR, MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, NBPtr[Die].MCTPtr);
+ if (!MemPtr->ErrorHandling (NBPtr[Die].MCTPtr, EXCLUDE_ALL_DCT, EXCLUDE_ALL_CHIPSEL, &MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ }
+ } else {
+ TrainInfo[Die].Training = TRUE;
+ }
+ }
+ }
+ }
+ //
+ // Call training on BSP
+ //
+ IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", NBPtr[BSP_DIE].Node);
+ NBPtr[BSP_DIE].BeforeDqsTraining (&(mmPtr->NBPtr[BSP_DIE]));
+ NBPtr[BSP_DIE].TrainingFlow (&(mmPtr->NBPtr[BSP_DIE]));
+ NBPtr[BSP_DIE].AfterDqsTraining (&(mmPtr->NBPtr[BSP_DIE]));
+
+ //
+ // Get Results from remote processors training
+ //
+ do {
+ StillTraining = FALSE;
+ for (Die = 0; Die < mmPtr->DieCount; Die ++ ) {
+ //
+ // For each Die that is training, read the status
+ //
+ if (TrainInfo[Die].Training == TRUE) {
+ GetLocalApicIdForCore (TrainInfo[Die].Socket, TrainInfo[Die].Core, &TargetApicId, StdHeader);
+ ApSts = ApUtilReadRemoteControlByte (TargetApicId, StdHeader);
+ if ((ApSts & 0x80) == 0) {
+ //
+ // Allocate buffer for received data
+ //
+ AllocHeapParams.RequestedBufferSize = (
+ sizeof (DIE_STRUCT) +
+ NBPtr[Die].DctCount * (
+ sizeof (DCT_STRUCT) + (
+ NBPtr[Die].ChannelCount * (
+ sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK) + (
+ (NBPtr[Die].MCTPtr->DctData[0].ChData[0].RowCount *
+ NBPtr[Die].MCTPtr->DctData[0].ChData[0].ColumnCount *
+ NUMBER_OF_DELAY_TABLES) +
+ (MAX_BYTELANES_PER_CHANNEL * MAX_CS_PER_CHANNEL * NUMBER_OF_FAILURE_MASK_TABLES) +
+ (MAX_DIMMS_PER_CHANNEL * MAX_NUMBER_LANES)
+ )
+ )
+ )
+ )
+ ) + 3;
+ AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_PAR_TRN_HANDLE, Die, 0, 0);
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, StdHeader) == AGESA_SUCCESS) {
+ //
+ // Receive Training Results
+ //
+
+ ReturnData.DataPtr = AllocHeapParams.BufferPtr;
+ ReturnData.DataSizeInDwords = (UINT16) AllocHeapParams.RequestedBufferSize / 4;
+ ReturnData.DataTransferFlags = 0;
+ Status = ApUtilReceiveBuffer (TrainInfo[Die].Socket, TrainInfo[Die].Core, &ReturnData, StdHeader);
+ if (Status != AGESA_SUCCESS) {
+ SetMemError (Status, NBPtr[Die].MCTPtr);
+ }
+
+ BufferPtr = AllocHeapParams.BufferPtr;
+ LibAmdMemCopy (NBPtr[Die].MCTPtr, BufferPtr, sizeof (DIE_STRUCT), StdHeader);
+ BufferPtr += sizeof (DIE_STRUCT);
+ LibAmdMemCopy ( NBPtr[Die].MCTPtr->DctData,
+ BufferPtr,
+ NBPtr[Die].DctCount * (sizeof (DCT_STRUCT) + NBPtr[Die].ChannelCount * sizeof (CH_DEF_STRUCT)),
+ StdHeader);
+ BufferPtr += NBPtr[Die].DctCount * (sizeof (DCT_STRUCT) + NBPtr[Die].ChannelCount * sizeof (CH_DEF_STRUCT));
+ LibAmdMemCopy ( NBPtr[Die].PSBlock,
+ BufferPtr,
+ NBPtr[Die].DctCount * NBPtr[Die].ChannelCount * sizeof (MEM_PS_BLOCK),
+ StdHeader);
+ BufferPtr += NBPtr[Die].DctCount * NBPtr[Die].ChannelCount * sizeof (MEM_PS_BLOCK);
+ LibAmdMemCopy ( NBPtr[Die].MCTPtr->DctData[0].ChData[0].RcvEnDlys,
+ BufferPtr,
+ (NBPtr[Die].DctCount * NBPtr[Die].ChannelCount) *
+ ((NBPtr[Die].MCTPtr->DctData[0].ChData[0].RowCount *
+ NBPtr[Die].MCTPtr->DctData[0].ChData[0].ColumnCount *
+ NUMBER_OF_DELAY_TABLES) +
+ (MAX_BYTELANES_PER_CHANNEL * MAX_CS_PER_CHANNEL * NUMBER_OF_FAILURE_MASK_TABLES) +
+ (MAX_DIMMS_PER_CHANNEL * MAX_NUMBER_LANES)
+ ),
+ StdHeader);
+
+ HeapDeallocateBuffer (AllocHeapParams.BufferHandle, StdHeader);
+
+ NBPtr[Die].AfterDqsTraining (&(mmPtr->NBPtr[Die]));
+ TrainInfo[Die].Training = FALSE;
+ } else {
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA, NBPtr[Die].Node, 0, 0, 0, StdHeader);
+ SetMemError (AGESA_FATAL, NBPtr[Die].MCTPtr);
+ ASSERT(FALSE); // Insufficient Heap Space allocation for parallel training buffer
+ }
+ } else if (ApSts == CORE_IDLE) {
+ // AP does not have buffer to transmit to BSP
+ // AP fails to locate a buffer for data transfer
+ TrainInfo[Die].Training = FALSE;
+ } else {
+ // Signal to loop through again
+ StillTraining = TRUE;
+ }
+ }
+ }
+ // Wait for 1 us
+ MemUWait10ns (100, NBPtr->MemPtr);
+ Time ++;
+ } while ((StillTraining) && ((Time < TimeOut) || !TimeoutEn)); // Continue until all Dies are finished
+ // if cannot finish in 1 s, do fatal exit
+
+ if (StillTraining && TimeoutEn) {
+ // Parallel training time out, do fatal exit, as there is at least one AP hangs.
+ PutEventLog (AGESA_FATAL, MEM_ERROR_PARALLEL_TRAINING_TIME_OUT, 0, 0, 0, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_FATAL, NBPtr[BSP_DIE].MCTPtr);
+ ASSERT(FALSE); // Timeout occurred while still training
+ }
+
+ for (Die = 0; Die < mmPtr->DieCount; Die ++ ) {
+ if (NBPtr[Die].MCTPtr->ErrCode == AGESA_FATAL) {
+ return FALSE;
+ }
+ }
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmStandardTraining.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmStandardTraining.c
new file mode 100644
index 0000000..bb8bccb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmStandardTraining.c
@@ -0,0 +1,344 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmStandardTraining.c
+ *
+ * Main Memory Feature implementation file for Standard Training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "ma.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MMSTANDARDTRAINING_FILECODE
+/* features */
+#include "mftds.h"
+
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemMStandardTraining (
+ IN OUT MEM_MAIN_DATA_BLOCK *mmPtr
+ );
+
+BOOLEAN
+MemM2DTrainingWithAggressor (
+ IN OUT MEM_MAIN_DATA_BLOCK *mmPtr
+ );
+
+BOOLEAN
+MemMStandardTrainingUsingAdjacentDies (
+ IN OUT MEM_MAIN_DATA_BLOCK *mmPtr
+ );
+/*-----------------------------------------------------------------------------
+* EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+extern BUILD_OPT_CFG UserOptions;
+extern MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR3[];
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * MemMStandardTraining
+ *
+ * This function implements standard memory training whereby training functions
+ * for all nodes are run by the BSP.
+ *
+ *
+ * @param[in,out] *mmPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMStandardTraining (
+ IN OUT MEM_MAIN_DATA_BLOCK *mmPtr
+ )
+{
+ UINT8 Die;
+ //
+ // If training is disabled, return success.
+ //
+ if (!UserOptions.CfgDqsTrainingControl) {
+ return TRUE;
+ }
+ //
+ // Run Northbridge-specific Standard Training feature for each die.
+ //
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart serial training\n");
+ for (Die = 0 ; Die < mmPtr->DieCount ; Die ++ ) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Die);
+ AGESA_TESTPOINT (TpProcMemBeforeAnyTraining, &(mmPtr->MemPtr->StdHeader));
+ mmPtr->NBPtr[Die].BeforeDqsTraining (&mmPtr->NBPtr[Die]);
+ mmPtr->NBPtr[Die].Execute1dMaxRdLatTraining = TRUE;
+ mmPtr->NBPtr[Die].FeatPtr->Training (&mmPtr->NBPtr[Die]);
+ mmPtr->NBPtr[Die].TechPtr->TechnologySpecificHook[LrdimmSyncTrainedDlys] (mmPtr->NBPtr[Die].TechPtr, NULL);
+ mmPtr->NBPtr[Die].AfterDqsTraining (&mmPtr->NBPtr[Die]);
+ if (mmPtr->NBPtr[Die].MCTPtr->ErrCode == AGESA_FATAL) {
+ break;
+ }
+ }
+ return (BOOLEAN) (Die == mmPtr->DieCount);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * MemMStandardTrainingUsingAdjacentDies
+ *
+ * This function implements standard memory training whereby training functions
+ * for all nodes are run by the BSP while enabling other dies to eable argressor channel
+ *
+ *
+ * @param[in,out] *mmPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemMStandardTrainingUsingAdjacentDies (
+ IN OUT MEM_MAIN_DATA_BLOCK *mmPtr
+ )
+{
+ UINT8 Die;
+ UINT8 AdjacentDie;
+ UINT32 AdjacentSocketNum;
+ UINT32 TargetSocketNum;
+ UINT32 ModuleNum;
+ UINT8 i;
+ UINT8 Dct;
+ UINT8 ChipSel;
+ BOOLEAN FirstCsFound;
+ //
+ // If training is disabled, return success.
+ //
+ if (!UserOptions.CfgDqsTrainingControl) {
+ return TRUE;
+ }
+ mmPtr->mmSharedPtr->CommonSmallestMaxNegVref = 0x7F;
+ mmPtr->mmSharedPtr->CommonSmallestMaxPosVref = 0x7F;
+ //
+ // Run Northbridge-specific Standard Training feature for each die.
+ //
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart standard serial training\n");
+ for (Die = 0 ; Die < mmPtr->DieCount ; Die ++ ) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Die);
+ AGESA_TESTPOINT (TpProcMemBeforeAnyTraining, &(mmPtr->MemPtr->StdHeader));
+ mmPtr->NBPtr[Die].BeforeDqsTraining (&mmPtr->NBPtr[Die]);
+ mmPtr->NBPtr[Die].Execute1dMaxRdLatTraining = FALSE;
+ mmPtr->NBPtr[Die].FeatPtr->Training (&mmPtr->NBPtr[Die]);
+ if (mmPtr->NBPtr[Die].MCTPtr->ErrCode == AGESA_FATAL) {
+ break;
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart 2D training with agressors\n");
+ for (Die = 0 ; Die < mmPtr->DieCount ; Die ++ ) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Die);
+ AGESA_TESTPOINT (TpProcMemBeforeAnyTraining, &(mmPtr->MemPtr->StdHeader));
+ GetSocketModuleOfNode (Die, &TargetSocketNum, &ModuleNum, &(mmPtr->MemPtr->StdHeader));
+ for (AdjacentDie = 0; AdjacentDie < mmPtr->DieCount; AdjacentDie++) {
+ mmPtr->NBPtr[Die].DieEnabled[AdjacentDie] = FALSE;
+ GetSocketModuleOfNode (AdjacentDie, &AdjacentSocketNum, &ModuleNum, &(mmPtr->MemPtr->StdHeader));
+ if (TargetSocketNum == AdjacentSocketNum) {
+ if (AdjacentDie != Die) {
+ if (mmPtr->NBPtr[AdjacentDie].MCTPtr->NodeMemSize != 0) {
+ mmPtr->NBPtr[Die].AdjacentDieNBPtr = &mmPtr->NBPtr[AdjacentDie];
+ mmPtr->NBPtr[Die].DieEnabled[AdjacentDie] = TRUE;
+ }
+ } else {
+ if (mmPtr->NBPtr[Die].MCTPtr->NodeMemSize != 0) {
+ mmPtr->NBPtr[Die].DieEnabled[Die] = TRUE;
+ }
+ }
+ // Determine the initial target CS, Max Dimms and max CS number for all DCTs (potential aggressors)
+ if (mmPtr->NBPtr[AdjacentDie].MCTPtr->NodeMemSize != 0) {
+ for (Dct = 0; Dct < mmPtr->NBPtr[AdjacentDie].DctCount; Dct++) {
+ FirstCsFound = FALSE;
+ mmPtr->NBPtr[AdjacentDie].SwitchDCT (&mmPtr->NBPtr[AdjacentDie], Dct);
+ for (ChipSel = 0; ChipSel < mmPtr->NBPtr[AdjacentDie].CsPerChannel; ChipSel = ChipSel + (mmPtr->NBPtr[Die].IsSupported[PerDimmAggressors2D] ? 2 : mmPtr->NBPtr[AdjacentDie].CsPerDelay) ) {
+ if ((mmPtr->NBPtr[AdjacentDie].DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) != 0) {
+ if (FirstCsFound == FALSE) {
+ // Set Initial CS value for Current Aggressor CS
+ mmPtr->NBPtr[AdjacentDie].InitialAggressorCSTarget[Dct] = ChipSel;
+ mmPtr->NBPtr[AdjacentDie].CurrentAggressorCSTarget[Dct] = mmPtr->NBPtr[AdjacentDie].InitialAggressorCSTarget[Dct];
+ FirstCsFound = TRUE;
+ }
+ mmPtr->NBPtr[AdjacentDie].MaxAggressorCSEnabled[Dct] = ChipSel;
+ mmPtr->NBPtr[AdjacentDie].MaxAggressorDimms[Dct]++;
+ }
+ }
+ }
+ }
+ }
+ }
+ if (mmPtr->NBPtr[Die].MCTPtr->NodeMemSize != 0) {
+ //Execute Technology specific 2D training features
+ i = 0;
+ while (memTrainSequenceDDR3[i].TrainingSequenceEnabled != 0) {
+ if (memTrainSequenceDDR3[i].TrainingSequenceEnabled (&mmPtr->NBPtr[Die])) {
+ mmPtr->NBPtr[Die].TrainingSequenceIndex = i;
+ // Execute 2D RdDqs Training
+ memTrainSequenceDDR3[i].MemTechFeatBlock->RdDqs2DTraining (mmPtr->NBPtr[Die].TechPtr);
+ // Execute MaxRdLat Training After 2D training
+ do {
+ if (memTrainSequenceDDR3[i].MemTechFeatBlock->MaxRdLatencyTraining (mmPtr->NBPtr[Die].TechPtr)) {
+ MemFInitTableDrive (&mmPtr->NBPtr[Die], MTAfterMaxRdLatTrn);
+ }
+ } while (mmPtr->NBPtr->ChangeNbFrequency (&mmPtr->NBPtr[Die]));
+ break;
+ }
+ i++;
+ }
+ }
+ mmPtr->NBPtr[Die].TechPtr->TechnologySpecificHook[LrdimmSyncTrainedDlys] (mmPtr->NBPtr[Die].TechPtr, NULL);
+ mmPtr->NBPtr[Die].AfterDqsTraining (&mmPtr->NBPtr[Die]);
+ if (mmPtr->NBPtr[Die].MCTPtr->ErrCode == AGESA_FATAL) {
+ break;
+ }
+ }
+ return (BOOLEAN) (Die == mmPtr->DieCount);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * MemM2DTrainingWithAggressor
+ *
+ * This function implements standard memory training whereby training functions
+ * for all nodes are run by the BSP while enabling other dies to eable argressor channel
+ *
+ *
+ * @param[in,out] *mmPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemM2DTrainingWithAggressor (
+ IN OUT MEM_MAIN_DATA_BLOCK *mmPtr
+ )
+{
+ UINT8 Die;
+ UINT8 Index;
+ //
+ // If training is disabled, return success.
+ //
+ if (!UserOptions.CfgDqsTrainingControl) {
+ return TRUE;
+ }
+ mmPtr->mmSharedPtr->CommonSmallestMaxNegVref = 0x7F;
+ mmPtr->mmSharedPtr->CommonSmallestMaxPosVref = 0x7F;
+ //
+ // Run Northbridge-specific Standard Training feature for each die.
+ //
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart standard serial training\n");
+ for (Die = 0 ; Die < mmPtr->DieCount ; Die ++ ) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Die);
+ AGESA_TESTPOINT (TpProcMemBeforeAnyTraining, &(mmPtr->MemPtr->StdHeader));
+ mmPtr->NBPtr[Die].BeforeDqsTraining (&mmPtr->NBPtr[Die]);
+ mmPtr->NBPtr[Die].Execute1dMaxRdLatTraining = FALSE;
+ mmPtr->NBPtr[Die].FeatPtr->Training (&mmPtr->NBPtr[Die]);
+ if (mmPtr->NBPtr[Die].MCTPtr->ErrCode == AGESA_FATAL) {
+ break;
+ }
+ }
+
+ //----------------------------------------------------------------
+ // Determine Aggressor Chipselects for all DCTs on all nodes.
+ //----------------------------------------------------------------
+ MemFeatMain.AggressorDetermination (mmPtr);
+
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart 2D training with agressors run independently\n");
+ for (Die = 0 ; Die < mmPtr->DieCount ; Die ++ ) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "Node %d\n", Die);
+ AGESA_TESTPOINT (TpProcMemBeforeAnyTraining, &(mmPtr->MemPtr->StdHeader));
+
+ if (mmPtr->NBPtr[Die].MCTPtr->NodeMemSize != 0) {
+ //Execute Technology specific 2D training features
+ Index = 0;
+ while (memTrainSequenceDDR3[Index].TrainingSequenceEnabled != 0) {
+ if (memTrainSequenceDDR3[Index].TrainingSequenceEnabled (&mmPtr->NBPtr[Die])) {
+ mmPtr->NBPtr[Die].TrainingSequenceIndex = Index;
+ // Execute 2D RdDqs Training
+ memTrainSequenceDDR3[Index].MemTechFeatBlock->RdDqs2DTraining (mmPtr->NBPtr[Die].TechPtr);
+ // Execute MaxRdLat Training After 2D training
+ do {
+ if (memTrainSequenceDDR3[Index].MemTechFeatBlock->MaxRdLatencyTraining (mmPtr->NBPtr[Die].TechPtr)) {
+ MemFInitTableDrive (&mmPtr->NBPtr[Die], MTAfterMaxRdLatTrn);
+ }
+ } while (mmPtr->NBPtr->ChangeNbFrequency (&mmPtr->NBPtr[Die]));
+ break;
+ }
+ Index++;
+ }
+ }
+ mmPtr->NBPtr[Die].TechPtr->TechnologySpecificHook[LrdimmSyncTrainedDlys] (mmPtr->NBPtr[Die].TechPtr, NULL);
+ mmPtr->NBPtr[Die].AfterDqsTraining (&mmPtr->NBPtr[Die]);
+ if (mmPtr->NBPtr[Die].MCTPtr->ErrCode == AGESA_FATAL) {
+ break;
+ }
+ } // End Die For Loop
+
+ return (BOOLEAN) (Die == mmPtr->DieCount);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmUmaAlloc.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmUmaAlloc.c
new file mode 100644
index 0000000..163fecd
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmUmaAlloc.c
@@ -0,0 +1,262 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmUmaAlloc.c
+ *
+ * Main Memory Feature implementation file for UMA allocation.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 86704 $ @e \$Date: 2013-01-24 17:29:29 -0600 (Thu, 24 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "heapManager.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "Ids.h"
+#include "mport.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MMUMAALLOC_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemMUmaAlloc (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+/*-----------------------------------------------------------------------------
+* EXPORTED FUNCTIONS
+*
+*-----------------------------------------------------------------------------
+*/
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * UMA allocation mechanism.
+ *
+ * @param[in,out] *MemMainPtr - Pointer to the MEM_MAIN_DATA_BLOCK
+ *
+ */
+BOOLEAN
+MemMUmaAlloc (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ )
+{
+ UINT32 TOM;
+ UINT32 TOM2;
+ UINT32 UmaSize;
+ UINT32 TopOfChIntlv;
+ UINT32 DctSelHi;
+ UINT32 UmaAlignment;
+ UINT32 UmaAbove4GBase;
+ UINT32 UmaBelow4GBase;
+ BOOLEAN DctSelIntLvEn;
+ BOOLEAN UmaAbove4GEn;
+ S_UINT64 SMsr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ UMA_INFO *UmaInfoPtr;
+ UINT8 Node;
+
+ MEM_DATA_STRUCT *MemPtr;
+ MEM_NB_BLOCK *NBPtr;
+ MEM_PARAMETER_STRUCT *RefPtr;
+
+ MemPtr = MemMainPtr->MemPtr;
+ NBPtr = &(MemMainPtr->NBPtr[BSP_DIE]);
+ RefPtr = NBPtr->RefPtr;
+
+ TOM2 = 0;
+ SMsr.lo = SMsr.hi = 0;
+ UmaAbove4GBase = 0;
+ RefPtr->UmaBase = 0;
+ UmaAlignment = (UINT32) UserOptions.CfgUmaAlignment;
+ UmaAbove4GEn = UserOptions.CfgUmaAbove4G;
+ DctSelIntLvEn = (NBPtr->GetBitField (NBPtr, BFDctSelIntLvEn) != 0) ? TRUE : FALSE;
+ TopOfChIntlv = NBPtr->GetBitField (NBPtr, BFDctSelBaseAddr) << (27 - 16);
+ DctSelHi = NBPtr->GetBitField (NBPtr, BFDctSelHi);
+
+ // Allocate heap for UMA_INFO
+ AllocHeapParams.RequestedBufferSize = sizeof (UMA_INFO);
+ AllocHeapParams.BufferHandle = AMD_UMA_INFO_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader)) {
+ ASSERT(FALSE); // Could not allocate heap for Uma information.
+ return FALSE;
+ }
+ UmaInfoPtr = (UMA_INFO *) AllocHeapParams.BufferPtr;
+ // Default all the fields of UMA_INFO
+ UmaInfoPtr->UmaMode = (UINT8) UMA_NONE;
+ UmaInfoPtr->UmaSize = 0;
+ UmaInfoPtr->UmaBase = 0;
+ UmaInfoPtr->UmaAttributes = 0;
+ UmaInfoPtr->MemClock = NBPtr->DCTPtr->Timings.TargetSpeed;
+
+ switch (RefPtr->UmaMode) {
+ case UMA_NONE:
+ UmaSize = 0;
+ break;
+ case UMA_SPECIFIED:
+ UmaSize = RefPtr->UmaSize;
+ break;
+ case UMA_AUTO:
+ UmaSize = NBPtr->GetUmaSize (NBPtr);
+ break;
+ default:
+ UmaSize = 0;
+ IDS_ERROR_TRAP;
+ }
+
+ if (UmaSize != 0) {
+ //TOM scaled from [47:0] to [47:16]
+ LibAmdMsrRead (TOP_MEM, (UINT64 *)&SMsr, &(NBPtr->MemPtr->StdHeader));
+ TOM = (SMsr.lo >> 16) | (SMsr.hi << (32 - 16));
+
+ UmaBelow4GBase = (TOM - UmaSize) & UmaAlignment;
+ // Initialize Ref->UmaBase to UmaBelow4GBase
+ RefPtr->UmaBase = UmaBelow4GBase;
+
+ // Uma Above 4G support
+ if (UmaAbove4GEn) {
+ //TOM2 scaled from [47:0] to [47:16]
+ LibAmdMsrRead (TOP_MEM2, (UINT64 *)&SMsr, &(NBPtr->MemPtr->StdHeader));
+ TOM2 = (SMsr.lo >> 16) | (SMsr.hi << (32 - 16));
+ if (TOM2 != 0) {
+ UmaAbove4GBase = (TOM2 - UmaSize) & UmaAlignment;
+ //Set UmaAbove4GBase to 0 if UmaAbove4GBase is below 4GB
+ if (UmaAbove4GBase < _4GB_RJ16) {
+ UmaAbove4GBase = 0;
+ }
+ if (UmaAbove4GBase != 0) {
+ RefPtr->UmaBase = UmaAbove4GBase;
+ // 1. TopOfChIntlv == 0 indicates that whole DCT0 and DCT1 memory are interleaved.
+ // 2. TopOfChIntlv >= TOM tells us :
+ // -All or portion of Uma region that above 4G is NOT interleaved.
+ // -Whole Uma region that below 4G is interleaved.
+ if (DctSelIntLvEn && (TopOfChIntlv >= TOM)) {
+ RefPtr->UmaBase = UmaBelow4GBase;
+ }
+ }
+ }
+ }
+
+ UmaInfoPtr->UmaMode = (UINT8) (RefPtr->UmaMode);
+ UmaInfoPtr->UmaBase = (UINT64) ((UINT64) RefPtr->UmaBase << 16);
+
+ if (RefPtr->UmaBase >= _4GB_RJ16) {
+ // UmaSize might be extended if it is 128MB or 256MB .. aligned, so update it.
+ RefPtr->UmaSize = TOM2 - UmaAbove4GBase;
+ // Uma Typing
+ MemNSetMTRRUmaRegionUCNb (NBPtr, &UmaAbove4GBase, &TOM2);
+ if (DctSelIntLvEn && (TopOfChIntlv == 0)) {
+ UmaInfoPtr->UmaAttributes = UMA_ATTRIBUTE_INTERLEAVE | UMA_ATTRIBUTE_ON_DCT0 | UMA_ATTRIBUTE_ON_DCT1;
+ } else {
+ // Entire UMA region is in the high DCT
+ UmaInfoPtr->UmaAttributes = (DctSelHi == 0) ? UMA_ATTRIBUTE_ON_DCT0 : UMA_ATTRIBUTE_ON_DCT1;
+ }
+ } else {
+ // UmaSize might be extended if it is 128MB or 256MB .. aligned, so update it.
+ RefPtr->UmaSize = TOM - UmaBelow4GBase;
+ // Uma Typing
+ NBPtr->UMAMemTyping (NBPtr);
+ if (DctSelIntLvEn && ((TopOfChIntlv == 0) || (TopOfChIntlv >= TOM))) {
+ UmaInfoPtr->UmaAttributes = UMA_ATTRIBUTE_INTERLEAVE | UMA_ATTRIBUTE_ON_DCT0 | UMA_ATTRIBUTE_ON_DCT1;
+ } else {
+ if (UmaBelow4GBase >= TopOfChIntlv) {
+ // Entire UMA region is in the high DCT
+ UmaInfoPtr->UmaAttributes = (DctSelHi == 0) ? UMA_ATTRIBUTE_ON_DCT0 : UMA_ATTRIBUTE_ON_DCT1;
+ } else if (TopOfChIntlv >= TOM) {
+ // Entire UMA region is in the low DCT
+ UmaInfoPtr->UmaAttributes = (DctSelHi == 1) ? UMA_ATTRIBUTE_ON_DCT0 : UMA_ATTRIBUTE_ON_DCT1;
+ } else {
+ // UMA region is in both DCT0 and DCT1
+ UmaInfoPtr->UmaAttributes = UMA_ATTRIBUTE_ON_DCT0 | UMA_ATTRIBUTE_ON_DCT1;
+ }
+ }
+ }
+ UmaInfoPtr->UmaSize = (RefPtr->UmaSize) << 16;
+ IDS_HDT_CONSOLE (MEM_FLOW, "UMA is allocated:\n\tBase: %x0000\n\tSize: %x0000\n", RefPtr->UmaBase, RefPtr->UmaSize);
+ NBPtr->FamilySpecificHook[FixupUmaInfo] (NBPtr, UmaInfoPtr);
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, "No UMA region is allocated !");
+ // Update the results
+ RefPtr->UmaSize = 0;
+ RefPtr->UmaBase = 0;
+ }
+
+ // Wrap UMA with ECC exclusion range so that MCT recognizes the data written by GMC
+ if (MemMainPtr->mmSharedPtr->AllECC == TRUE) {
+ MemMDisableScrubber (MemMainPtr);
+ for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
+ NBPtr = &(MemMainPtr->NBPtr[Node]);
+ NBPtr->MemNSetEccExclusionRange (NBPtr);
+ }
+ MemMRestoreScrubber (MemMainPtr);
+ }
+
+ return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmflow.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmflow.c
new file mode 100644
index 0000000..d497aec
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmflow.c
@@ -0,0 +1,406 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmflow.c
+ *
+ * Main Memory Flow Entrypoint file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "AdvancedApi.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuServices.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MMFLOW_FILECODE
+/* features */
+
+extern MEM_NB_SUPPORT memNBInstalled[];
+extern MEM_TECH_CONSTRUCTOR* memTechInstalled[];
+extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
+extern MEM_FLOW_CFG* memFlowControlInstalled[];
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+MemSPDDataProcess (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function is the main memory configuration function for DR DDR3
+ *
+ * Requirements:
+ *
+ * Run-Time Requirements:
+ * 1. Complete Hypertransport Bus Configuration
+ * 2. AmdMemInitDataStructDef must be run to set default values
+ * 3. MSR bit to allow access to high PCI regs set on all nodes
+ * 4. BSP in Big Real Mode
+ * 5. Stack available
+ * 6. MCG_CTL=-1, MC4_EN=0 for all CPUs
+ * 7. MCi_STS from shutdown/warm reset recorded (if desired) prior to entry
+ * 8. All var MTRRs reset to zero
+ * 9. State of NB_CFG.DisDatMsk set properly on all CPUs
+ *
+ * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT
+ *
+ * @return AGESA_STATUS
+ * - AGESA_ALERT
+ * - AGESA_FATAL
+ * - AGESA_SUCCESS
+ * - AGESA_WARNING
+ */
+AGESA_STATUS
+AmdMemAuto (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ )
+{
+ MEM_SHARED_DATA mmSharedData;
+ MEM_MAIN_DATA_BLOCK mmData;
+ MEM_NB_BLOCK *NBPtr;
+ MEM_TECH_BLOCK *TechPtr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ AGESA_STATUS Retval;
+ UINT8 i;
+ UINT8 Die;
+ UINT8 DieCount;
+ UINT8 Tab;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ ASSERT (MemPtr != NULL);
+
+ AGESA_TESTPOINT (TpProcMemAmdMemAuto, &MemPtr->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_BEGINPROCAMDMEMAUTO, &MemPtr->StdHeader);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "MEM PARAMS:\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tBottomIo : %04x\n", MemPtr->ParameterListPtr->BottomIo);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tMemHoleRemap : %d\n", MemPtr->ParameterListPtr->MemHoleRemapping);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tLimitBelow1TB : %d\n", MemPtr->ParameterListPtr->LimitMemoryToBelow1Tb);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tUserTimingMode : %d\n", MemPtr->ParameterListPtr->UserTimingMode);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClockValue : %d\n", MemPtr->ParameterListPtr->MemClockValue);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tBankIntlv : %d\n", MemPtr->ParameterListPtr->EnableBankIntlv);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tNodeIntlv : %d\n", MemPtr->ParameterListPtr->EnableNodeIntlv);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tChannelIntlv : %d\n", MemPtr->ParameterListPtr->EnableChannelIntlv);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tEccFeature : %d\n", MemPtr->ParameterListPtr->EnableEccFeature);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tPowerDown : %d\n", MemPtr->ParameterListPtr->EnablePowerDown);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tOnLineSpare : %d\n", MemPtr->ParameterListPtr->EnableOnLineSpareCtl);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tParity : %d\n", MemPtr->ParameterListPtr->EnableParity);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tBankSwizzle : %d\n", MemPtr->ParameterListPtr->EnableBankSwizzle);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClr : %d\n", MemPtr->ParameterListPtr->EnableMemClr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tUmaMode : %d\n", MemPtr->ParameterListPtr->UmaMode);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tUmaSize : %d\n", MemPtr->ParameterListPtr->UmaSize);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tMemRestoreCtl : %d\n", MemPtr->ParameterListPtr->MemRestoreCtl);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tSaveMemContextCtl : %d\n", MemPtr->ParameterListPtr->SaveMemContextCtl);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tExternalVrefCtl : %d\n", MemPtr->ParameterListPtr->ExternalVrefCtl );
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tForceTrainMode : %d\n", MemPtr->ParameterListPtr->ForceTrainMode );
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tAMP : %d\n\n", MemPtr->ParameterListPtr->AmpEnable);
+
+ //----------------------------------------------------------------------------
+ // Get TSC rate, which will be used later in Wait10ns routine
+ //----------------------------------------------------------------------------
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &MemPtr->StdHeader);
+ FamilySpecificServices->GetTscRate (FamilySpecificServices, &MemPtr->TscRate, &MemPtr->StdHeader);
+
+ //----------------------------------------------------------------------------
+ // Read In SPD Data
+ //----------------------------------------------------------------------------
+ AGESA_TESTPOINT (TpProcMemBeforeSpdProcessing, &MemPtr->StdHeader);
+ MemSPDDataProcess (MemPtr);
+
+ //----------------------------------------------------------------
+ // Initialize Main Data Block
+ //----------------------------------------------------------------
+ mmData.MemPtr = MemPtr;
+ mmData.mmSharedPtr = &mmSharedData;
+ LibAmdMemFill (&mmSharedData, 0, sizeof (mmSharedData), &MemPtr->StdHeader);
+ mmSharedData.DimmExcludeFlag = NORMAL;
+ mmSharedData.NodeIntlv.IsValid = FALSE;
+ //----------------------------------------------------------------
+ // Discover populated CPUs
+ //
+ //----------------------------------------------------------------
+ Retval = MemSocketScan (&mmData);
+ if (Retval == AGESA_FATAL) {
+ return Retval;
+ }
+ DieCount = mmData.DieCount;
+ //----------------------------------------------------------------
+ //
+ // Allocate Memory for NB and Tech Blocks
+ //
+ // NBPtr[Die]----+
+ // |
+ // V
+ // +---+---+---+---+---+---+---+---+
+ // | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | NB Blocks
+ // +---+---+---+---+---+---+---+---+
+ // | | | | | | | |
+ // | | | | | | | |
+ // v v v v v v v v
+ // +---+---+---+---+---+---+---+---+
+ // | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Tech Blocks
+ // +---+---+---+---+---+---+---+---+
+ //
+ //
+ //----------------------------------------------------------------
+ AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (MEM_NB_BLOCK) + sizeof (MEM_TECH_BLOCK)));
+ AllocHeapParams.BufferHandle = AMD_MEM_AUTO_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader)) {
+ ASSERT(FALSE); // NB and Tech Block Heap allocate error
+ return AGESA_FATAL;
+ }
+ NBPtr = (MEM_NB_BLOCK *)AllocHeapParams.BufferPtr;
+ TechPtr = (MEM_TECH_BLOCK *) (&NBPtr[DieCount]);
+ mmData.NBPtr = NBPtr;
+ mmData.TechPtr = TechPtr;
+
+ //----------------------------------------------------------------
+ // Create NB Blocks
+ //
+ //----------------------------------------------------------------
+ for (Die = 0 ; Die < DieCount ; Die++ ) {
+ i = 0;
+ while (memNBInstalled[i].MemConstructNBBlock != 0) {
+ if (memNBInstalled[i].MemConstructNBBlock (&NBPtr[Die], MemPtr, memNBInstalled[i].MemFeatBlock, &mmSharedData, Die) == TRUE) {
+ break;
+ }
+ i++;
+ }
+ // Couldn't find a NB which supported this family
+ if (memNBInstalled[i].MemConstructNBBlock == 0) {
+ return AGESA_FATAL;
+ }
+ }
+ //----------------------------------------------------------------
+ // Create Technology Blocks
+ //
+ //----------------------------------------------------------------
+ for (Die = 0 ; Die < DieCount ; Die++ ) {
+ i = 0;
+ while (memTechInstalled[i] != NULL) {
+ if (memTechInstalled[i] (&TechPtr[Die], &NBPtr[Die])) {
+ NBPtr[Die].TechPtr = &TechPtr[Die];
+ break;
+ }
+ i++;
+ }
+ // Couldn't find a Tech block which supported this family
+ if (memTechInstalled[i] == NULL) {
+ return AGESA_FATAL;
+ }
+ }
+
+ //----------------------------------------------------------------
+ // AMP initialization
+ //
+ //----------------------------------------------------------------
+ for (Die = 0 ; Die < DieCount ; Die++ ) {
+ NBPtr[Die].FeatPtr->InitAMP (&NBPtr[Die]);
+ }
+
+ //----------------------------------------------------------------
+ //
+ // MEMORY INITIALIZATION TASKS
+ //
+ //----------------------------------------------------------------
+ i = 0;
+ while (memFlowControlInstalled[i] != NULL) {
+ Retval = memFlowControlInstalled[i] (&mmData);
+ if (MemPtr->IsFlowControlSupported == TRUE) {
+ break;
+ }
+ i++;
+ }
+
+ //----------------------------------------------------------------
+ // Deallocate NB register tables
+ //----------------------------------------------------------------
+ for (Tab = 0; Tab < NumberOfNbRegTables; Tab++) {
+ HeapDeallocateBuffer (GENERATE_MEM_HANDLE (ALLOC_NB_REG_TABLE, Tab, 0, 0), &MemPtr->StdHeader);
+ }
+
+ //----------------------------------------------------------------
+ // Check for errors and return
+ //----------------------------------------------------------------
+ AGESA_TESTPOINT (TpProcMemEnd, &MemPtr->StdHeader);
+ IDS_PERF_TIMESTAMP (TP_ENDPROCAMDMEMAUTO, &MemPtr->StdHeader);
+ for (Die = 0; Die < DieCount; Die++) {
+ if (NBPtr[Die].MCTPtr->ErrCode > Retval) {
+ Retval = NBPtr[Die].MCTPtr->ErrCode;
+ }
+ }
+ return Retval;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function fills a default SPD buffer with SPD values for all DIMMs installed in the system
+ *
+ * The SPD Buffer is populated with a Socket-Channel-Dimm centric view of the Dimms. At this
+ * point, the Memory controller type is not known, and the platform BIOS does not know the anything
+ * about which DIMM is on which DCT. So the DCT relationship is abstracted from the arrangement
+ * of SPD information here. We use the utility functions GetSpdSocketIndex(), GetMaxChannelsPerSocket(),
+ * and GetMaxDimmsPerChannel() to Map the SPD data according to which Socket-relative channel the DIMMs
+ * are connected to. The functions rely on either the maximum values in the
+ * PlatformSpecificOverridingTable or if unspecified, the absolute maximums in AGESA.H.
+ *
+ * This mapping is translated in the Northbridge object Constructor and the Technology block constructor.
+ *
+ * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+
+VOID
+STATIC
+MemSPDDataProcess (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ )
+{
+ UINT8 Socket;
+ UINT8 Channel;
+ UINT8 Dimm;
+ UINT8 DimmIndex;
+ UINT32 AgesaStatus;
+ UINT8 MaxSockets;
+ UINT8 MaxChannelsPerSocket;
+ UINT8 MaxDimmsPerChannel;
+ SPD_DEF_STRUCT *DimmSPDPtr;
+ PSO_TABLE *PsoTable;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ AGESA_READ_SPD_PARAMS SpdParam;
+
+ ASSERT (MemPtr != NULL);
+ MaxSockets = (UINT8) (0x000000FF & GetPlatformNumberOfSockets ());
+ PsoTable = MemPtr->ParameterListPtr->PlatformMemoryConfiguration;
+ //
+ // Allocate heap for the table
+ //
+ AllocHeapParams.RequestedBufferSize = (GetSpdSocketIndex (PsoTable, MaxSockets, &MemPtr->StdHeader) * sizeof (SPD_DEF_STRUCT));
+ AllocHeapParams.BufferHandle = AMD_MEM_SPD_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) == AGESA_SUCCESS) {
+ MemPtr->SpdDataStructure = (SPD_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+ //
+ // Initialize SpdParam Structure
+ //
+ LibAmdMemCopy ((VOID *)&SpdParam, (VOID *)MemPtr, (UINTN)sizeof (SpdParam.StdHeader), &MemPtr->StdHeader);
+ //
+ // Populate SPDDataBuffer
+ //
+ SpdParam.MemData = MemPtr;
+ DimmIndex = 0;
+ for (Socket = 0; Socket < (UINT16)MaxSockets; Socket++) {
+ MaxChannelsPerSocket = GetMaxChannelsPerSocket (PsoTable, Socket, &MemPtr->StdHeader);
+ SpdParam.SocketId = Socket;
+ for (Channel = 0; Channel < MaxChannelsPerSocket; Channel++) {
+ SpdParam.MemChannelId = Channel;
+ MaxDimmsPerChannel = GetMaxDimmsPerChannel (PsoTable, Socket, Channel);
+ for (Dimm = 0; Dimm < MaxDimmsPerChannel; Dimm++) {
+ SpdParam.DimmId = Dimm;
+ DimmSPDPtr = &(MemPtr->SpdDataStructure[DimmIndex++]);
+ SpdParam.Buffer = DimmSPDPtr->Data;
+ AGESA_TESTPOINT (TpProcMemBeforeAgesaReadSpd, &MemPtr->StdHeader);
+ AgesaStatus = AgesaReadSpd (0, &SpdParam);
+ AGESA_TESTPOINT (TpProcMemAfterAgesaReadSpd, &MemPtr->StdHeader);
+ if (AgesaStatus == AGESA_SUCCESS) {
+ DimmSPDPtr->DimmPresent = TRUE;
+ IDS_HDT_CONSOLE (MEM_FLOW, "SPD Socket %d Channel %d Dimm %d: %08x\n", Socket, Channel, Dimm, SpdParam.Buffer);
+ } else {
+ DimmSPDPtr->DimmPresent = FALSE;
+ }
+ }
+ }
+ }
+ } else {
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_SPD, 0, 0, 0, 0, &MemPtr->StdHeader);
+ //
+ // Assert here if unable to allocate heap for SPDs
+ //
+ IDS_ERROR_TRAP;
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmlvddr3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmlvddr3.h
new file mode 100644
index 0000000..bbbf5f6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mmlvddr3.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmLvDdr3.h
+ *
+ * Main low voltage DDR3 support common header
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MMLVDDR3_H_
+#define _MMLVDDR3_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemMLvDdr3PerformanceEnhPre (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+BOOLEAN
+MemMLvDdr3PerformanceEnhFinalize (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+#endif /* _MMLVDDR3_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mu.asm b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mu.asm
new file mode 100644
index 0000000..8f14379
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mu.asm
@@ -0,0 +1,496 @@
+;*****************************************************************************
+; AMD Generic Encapsulated Software Architecture
+;
+; $Workfile:: mu.asm $ $Revision:: 841#$ $Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+; Description: Main memory controller system configuration for AGESA
+;
+;
+;*****************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*****************************************************************************
+;============================================================================
+
+
+ .XLIST
+ .LIST
+
+ .686p
+ .MODEL FLAT
+ .CODE
+ ASSUME FS: NOTHING
+
+; Define the calling convention used for the C library modules
+;@attention - This should be in a central include file
+CALLCONV EQU NEAR C
+
+
+;===============================================================================
+;memUOutPort:
+;
+; Do a 32 Bit IO Out operation using edx.
+; NOTE: This function will be obsolete in the future.
+;
+; In: Port - port number
+; Value - value to be written
+;
+; Out:
+;
+; All registers preserved.
+;===============================================================================
+MemUOutPort PROC CALLCONV PUBLIC Port:DWORD, Value:DWORD
+ pushad
+ mov edx,Port
+ mov eax,Value
+ out dx,al
+ popad
+ ret
+MemUOutPort ENDP
+
+
+;----------------------------------------------------------------------------
+; _SFENCE();
+;
+_SFENCE macro
+ db 0Fh,0AEh,0F8h
+ endm
+
+;----------------------------------------------------------------------------
+; _MFENCE();
+;
+_MFENCE macro
+ db 0Fh,0AEh,0F0h
+ endm
+
+;----------------------------------------------------------------------------
+; _EXECFENCE();
+;
+_EXECFENCE macro
+ out 0EDh,al ;prevent speculative execution of following instructions
+ endm
+
+;===============================================================================
+;MemUWriteCachelines:
+; Write a test pattern to DRAM
+;
+; In: Pattern - pointer to the write pattern
+; Address - Physical address to be read
+; ClCount - number of cachelines to be read
+; Out:
+;
+;All registers preserved.
+;===============================================================================
+MemUWriteCachelines PROC CALLCONV PUBLIC Address:DWORD, Pattern:NEAR PTR DWORD, ClCount:WORD
+ pushad
+ push ds
+
+ mov eax,Address
+ push ss
+ pop ds
+ xor edx,edx
+ mov edx, DWORD PTR Pattern
+ mov esi,edx
+ mov edx,16
+ _EXECFENCE
+ xor ecx, ecx
+ mov cx,ClCount
+ shl ecx,2
+ @@:
+ db 66h, 0Fh,6Fh,06 ;MOVDQA xmm0,[esi]
+ db 64h, 66h, 0Fh,0E7h,00 ;MOVNTDQ fs:[eax],xmm0 (xmm0 is 128 bits)
+ add eax,edx
+ add esi,edx
+ loop @B
+
+ pop ds
+ popad
+ ret
+MemUWriteCachelines ENDP
+
+;===============================================================================
+;MemUReadCachelines:
+;
+; Read a pattern of 72 bit times (per DQ), to test dram functionality. The
+;pattern is a stress pattern which exercises both ISI and crosstalk. The number
+;of cache lines to fill is dependent on DCT width mode and burstlength.
+;
+; In: Buffer - pointer to a buffer where read data will be stored
+; Address - Physical address to be read
+; ClCount - number of cachelines to be read
+; Out:
+;
+;All registers preserved.
+;===============================================================================
+MemUReadCachelines PROC CALLCONV PUBLIC Buffer:NEAR PTR DWORD, Address:DWORD, ClCount:WORD
+LOCAL Count:BYTE
+ pushad
+ ; First, issue continuous dummy reads to fill up the cache
+ mov eax,Address
+ .if (ClCount > 18)
+ mov cx,ClCount
+ shr cx,4
+ mov Count,cl
+ .while (Count != 0)
+ push eax
+ mov edi,eax
+ add edi,128 ;bias value (to account for signed displacement)
+ ;clflush opcode=0F AE /7
+ mov esi,edi
+ mov ebx,esi
+ mov ecx,esi
+ mov edx,esi
+ add edi,4*64 ;TestAddr+4 cache lines
+ add ebx,8*64 ;TestAddr+8 cache lines
+ add ecx,12*64 ;TestAddr+12 cache lines
+ add edx,16*64 ;TestAddr+16 cache lines
+ sub edx,128
+ _EXECFENCE
+ mov eax,fs:[esi-128] ;TestAddr
+ _MFENCE
+ mov eax,fs:[esi-64] ;TestAddr+1 cache line
+ _MFENCE
+ mov eax,fs:[esi] ;TestAddr+2 cache lines
+ _MFENCE
+ mov eax,fs:[esi+64] ;TestAddr+3 cache lines
+ _MFENCE
+ mov eax,fs:[edi-128] ;TestAddr+4 cache lines
+ _MFENCE
+ mov eax,fs:[edi-64] ;TestAddr+5 cache lines
+ _MFENCE
+ mov eax,fs:[edi] ;TestAddr+6 cache lines
+ _MFENCE
+ mov eax,fs:[edi+64] ;TestAddr+7 cache lines
+ _MFENCE
+ mov eax,fs:[ebx-128] ;TestAddr+8 cache lines
+ _MFENCE
+ mov eax,fs:[ebx-64] ;TestAddr+9 cache lines
+ _MFENCE
+ mov eax,fs:[ebx] ;TestAddr+10 cache lines
+ _MFENCE
+ mov eax,fs:[ebx+64] ;TestAddr+11 cache lines
+ _MFENCE
+ mov eax,fs:[ecx-128] ;TestAddr+12 cache lines
+ _MFENCE
+ mov eax,fs:[ecx-64] ;TestAddr+13 cache lines
+ _MFENCE
+ mov eax,fs:[ecx] ;TestAddr+14 cache lines
+ _MFENCE
+ mov eax,fs:[ecx+64] ;TestAddr+15 cache lines
+ _MFENCE
+ pop eax
+ add eax,(16*64) ;Next 16CL
+ dec Count
+ .endw
+ .else
+ mov edi,eax
+ add edi,128 ;bias value (to account for signed displacement)
+ ;clflush opcode=0F AE /7
+ mov esi,edi
+ mov ebx,esi
+ mov ecx,esi
+ mov edx,esi
+ add edi,4*64 ;TestAddr+4 cache lines
+ add ebx,8*64 ;TestAddr+8 cache lines
+ add ecx,12*64 ;TestAddr+12 cache lines
+ add edx,16*64 ;TestAddr+16 cache lines
+ sub edx,128
+ .if(ClCount == 1)
+ _MFENCE
+ mov eax,fs:[esi-128] ;TestAddr
+ _MFENCE
+ .elseif(ClCount == 3)
+ _EXECFENCE
+ mov eax,fs:[esi-128] ;TestAddr
+ _MFENCE
+ mov eax,fs:[esi-64] ;TestAddr+1 cache line
+ _MFENCE
+ mov eax,fs:[esi] ;TestAddr+2 cache lines
+ _MFENCE
+ .elseif(ClCount == 6)
+ _EXECFENCE
+ mov eax,fs:[esi-128] ;TestAddr
+ _MFENCE
+ mov eax,fs:[esi-64] ;TestAddr+1 cache line
+ _MFENCE
+ mov eax,fs:[esi] ;TestAddr+2 cache lines
+ _MFENCE
+ mov eax,fs:[esi+64] ;TestAddr+3 cache lines
+ _MFENCE
+ mov eax,fs:[edi-128] ;TestAddr+4 cache lines
+ _MFENCE
+ mov eax,fs:[edi-64] ;TestAddr+5 cache lines
+ _MFENCE
+ .elseif(ClCount == 9)
+ _EXECFENCE
+ mov eax,fs:[esi-128] ;TestAddr
+ _MFENCE
+ mov eax,fs:[esi-64] ;TestAddr+1 cache line
+ _MFENCE
+ mov eax,fs:[esi] ;TestAddr+2 cache lines
+ _MFENCE
+ mov eax,fs:[esi+64] ;TestAddr+3 cache lines
+ _MFENCE
+ mov eax,fs:[edi-128] ;TestAddr+4 cache lines
+ _MFENCE
+ mov eax,fs:[edi-64] ;TestAddr+5 cache lines
+ _MFENCE
+ mov eax,fs:[edi] ;TestAddr+6 cache lines
+ _MFENCE
+ mov eax,fs:[edi+64] ;TestAddr+7 cache lines
+ _MFENCE
+ mov eax,fs:[ebx-128] ;TestAddr+8 cache lines
+ _MFENCE
+ .elseif(ClCount == 18)
+ _EXECFENCE
+ mov eax,fs:[esi-128] ;TestAddr
+ _MFENCE
+ mov eax,fs:[esi-64] ;TestAddr+1 cache line
+ _MFENCE
+ mov eax,fs:[esi] ;TestAddr+2 cache lines
+ _MFENCE
+ mov eax,fs:[esi+64] ;TestAddr+3 cache lines
+ _MFENCE
+ mov eax,fs:[edi-128] ;TestAddr+4 cache lines
+ _MFENCE
+ mov eax,fs:[edi-64] ;TestAddr+5 cache lines
+ _MFENCE
+ mov eax,fs:[edi] ;TestAddr+6 cache lines
+ _MFENCE
+ mov eax,fs:[edi+64] ;TestAddr+7 cache lines
+ _MFENCE
+ mov eax,fs:[ebx-128] ;TestAddr+8 cache lines
+ _MFENCE
+ mov eax,fs:[ebx-64] ;TestAddr+9 cache lines
+ _MFENCE
+ mov eax,fs:[ebx] ;TestAddr+10 cache lines
+ _MFENCE
+ mov eax,fs:[ebx+64] ;TestAddr+11 cache lines
+ _MFENCE
+ mov eax,fs:[ecx-128] ;TestAddr+12 cache lines
+ _MFENCE
+ mov eax,fs:[ecx-64] ;TestAddr+13 cache lines
+ _MFENCE
+ mov eax,fs:[ecx] ;TestAddr+14 cache lines
+ _MFENCE
+ mov eax,fs:[ecx+64] ;TestAddr+15 cache lines
+ _MFENCE
+ mov eax,fs:[edx] ;TestAddr+16 cache lines
+ _MFENCE
+ mov eax,fs:[edx+64] ;TestAddr+17 cache lines
+ _MFENCE
+ .endif
+ .endif
+ _MFENCE
+
+ ; Then, copy data to buffer
+ mov esi,Address
+ xor edx,edx
+ mov edx,DWORD PTR Buffer
+ mov edi,edx
+ xor ecx, ecx
+ mov cx,ClCount
+ shl ecx,6
+ @@:
+ mov al,fs:[esi]
+ mov ss:[edi],al
+ inc esi
+ inc edi
+ loop @B
+
+ popad
+ ret
+MemUReadCachelines ENDP
+
+;===============================================================================
+;MemUDummyCLRead:
+;
+; Perform a single cache line read from a given physical address.
+;
+; In: Address - Physical address to be read
+; ClCount - number of cachelines to be read
+; Out:
+;
+;All registers preserved.
+;===============================================================================
+MemUDummyCLRead PROC CALLCONV PUBLIC Address:DWORD
+ _SFENCE
+ pushad
+ mov eax,Address
+ mov dl,fs:[eax]
+ popad
+ ret
+MemUDummyCLRead ENDP
+
+;===============================================================================
+;MemUFlushPattern:
+;
+; Flush a pattern of 72 bit times (per DQ) from cache. This procedure is used
+;to ensure cache miss on the next read training.
+;
+; In: Address - Physical address to be flushed
+; ClCount - number of cachelines to be flushed
+; Out:
+;
+;All registers preserved.
+;===============================================================================
+MemUFlushPattern PROC CALLCONV PUBLIC Address:DWORD, ClCount:WORD
+ pushad
+ mov edi,Address
+ movzx ecx,ClCount
+ @@:
+ _MFENCE ; Force strong ordering of clflush
+ db 64h,0Fh,0AEh,3Fh ; MemUClFlush fs:[edi]
+ _MFENCE
+ add edi,64
+ loop @B
+ popad
+ ret
+MemUFlushPattern ENDP
+
+
+;===============================================================================
+;MemUGetWrLvNblErr:
+; Read ClCount number of cachelines then return the bitmap that indicates
+; the write leveling result of each byte lane.
+;
+; IN: ErrBitmap - pointer to a DWORD that will be assigned with WL result
+; Address - Physical address to be sampled
+; ClCount - number of cachelines to be read
+;
+; OUT: ErrBitmap - WL result
+;
+;All registers preserved
+;===============================================================================
+MemUGetWrLvNblErr PROC CALLCONV PUBLIC ErrBitmap:NEAR PTR DWORD, Address:DWORD, ClCount:WORD
+LOCAL ZeroCount[32]:WORD
+
+ pushad
+ mov esi,Address
+ _EXECFENCE
+ ;Cache fill
+ movzx ecx,ClCount
+ @@:
+ mov eax,fs:[esi]
+ add esi,64
+ loop @B
+ _MFENCE
+
+ ; Then, count the number of 0's
+ ;push es
+ ;push ss
+ ;pop es
+ lea edi,ZeroCount
+ mov cx,SIZEOF ZeroCount
+ mov al,0
+ rep stosb
+ ;pop es
+
+ mov esi,Address
+ lea edi,ZeroCount
+ mov cx,ClCount
+ shl cx,6
+ .while(cx > 0)
+ mov al,fs:[esi]
+ test al,00Fh ;check lower nibble
+ .if(ZERO?)
+ inc WORD PTR [edi]
+ .endif
+ add edi,2
+ test al,0F0h ;check upper nibble
+ .if(ZERO?)
+ inc WORD PTR [edi]
+ .endif
+ add edi,2
+ inc esi
+ dec cx
+ test cx,07h
+ .if(ZERO?)
+ sub edi,(16*2)
+ sub cx,8
+ add esi,8
+ .endif
+ .endw
+
+ ; Then, average and compress data to error bits
+ lea esi,ZeroCount
+ mov dx,ClCount
+ shl dx,1
+ xor eax,eax
+ xor ecx,ecx
+ mov cl,0
+ .while(cl<16)
+ .if(WORD PTR [esi] < dx)
+ bts eax,ecx
+ .endif
+ add esi,2
+ inc cl
+ .endw
+ xor edx,edx
+ mov dx,WORD PTR ErrBitmap
+ mov [edx], ax
+
+ popad
+ ret
+MemUGetWrLvNblErr ENDP
+
+;===============================================================================
+;AlignPointerTo16Byte:
+; Modifies BufferPtr to be 16 byte aligned
+;
+; In: BufferPtrPtr - Pointer to buffer pointer
+; Out: BufferPtrPtr - Pointer to buffer pointer that has been 16 byte aligned
+;
+;All registers preserved.
+;===============================================================================
+AlignPointerTo16Byte PROC CALLCONV PUBLIC BufferPtrPtr:NEAR PTR DWORD
+ push edx
+ push eax
+ mov edx, BufferPtrPtr
+ mov eax, [edx]
+ add eax, 16
+ and ax, 0FFF0h
+ mov [edx], eax
+ pop eax
+ pop edx
+ ret
+AlignPointerTo16Byte ENDP
+
+;===============================================================================
+;MemUMFenceInstr:
+; Serialize instruction
+;
+; In:
+; Out:
+;
+;All registers preserved.
+;===============================================================================
+MemUMFenceInstr PROC CALLCONV PUBLIC
+ _MFENCE
+ ret
+MemUMFenceInstr ENDP
+
+ END
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mu.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mu.c
new file mode 100644
index 0000000..a4e5716
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/mu.c
@@ -0,0 +1,250 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * HyperTransport features and sequence implementation.
+ *
+ * Implements the external AmdHtInitialize entry point.
+ * Contains routines for directing the sequence of available features.
+ * Mostly, but not exclusively, AGESA_TESTPOINT invocations should be
+ * contained in this file, and not in the feature code.
+ *
+ * From a build option perspective, it may be that a few lines could be removed
+ * from compilation in this file for certain options. It is considered that
+ * the code savings from this are too small to be of concern and this file
+ * should not have any explicit build option implementation.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: HyperTransport
+ * @e \$Revision: 35978 $ @e \$Date: 2010-08-07 02:18:50 +0800 (Sat, 07 Aug 2010) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (c) 2011, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Filecode.h"
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+VOID
+MemUWriteCachelines (
+ IN UINT32 Address,
+ IN UINT8 Pattern[],
+ IN UINT16 ClCount
+ );
+
+VOID
+MemUReadCachelines (
+ IN UINT8 Buffer[],
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ );
+
+VOID
+MemUDummyCLRead (
+ IN UINT32 Address
+ );
+
+VOID
+MemUMFenceInstr (
+ VOID
+ );
+
+VOID
+MemUFlushPattern (
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ );
+
+VOID
+AlignPointerTo16Byte (
+ IN OUT UINT8 **BufferPtrPtr
+ );
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+//----------------------------------------------------------------------------
+
+VOID
+MemUWriteCachelines (
+ IN UINT32 Address,
+ IN UINT8 Pattern[],
+ IN UINT16 ClCount
+ )
+{
+ UINTN Index;
+ CHAR8 *Position;
+ __m128i *Src = (void *) Pattern;
+ __m128i *Dest = (void *) (size_t)Address;
+
+ Position = (void *) Pattern;
+
+ // ssd - important: without this, the src data may get evicted from cache
+ _mm_mfence ();
+
+ for (Index = 0; Index < ClCount * 4; Index++){
+ _mm_stream_si128_fs (Dest, Src);
+ Src++;
+ Dest++;
+ }
+
+ // ssd - might not be required, but no measurable boot time impact
+ _mm_mfence ();
+}
+
+//----------------------------------------------------------------------------
+// MemUReadCachelines:
+//
+// Read a pattern of 72 bit times (per DQ), to test dram functionality. The
+// pattern is a stress pattern which exercises both ISI and crosstalk. The number
+// of cache lines to fill is dependent on DCT width mode and burstlength.
+//
+// In: Buffer - pointer to a buffer where read data will be stored
+// Address - Physical address to be read
+// ClCount - number of cachelines to be read
+
+VOID
+MemUReadCachelines (
+ IN UINT8 Buffer[],
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ )
+{
+ UINTN Index;
+ UINT32 *Dest;
+
+ for (Index = 0; Index < ClCount * 16; Index++) {
+ Dest = (void *) &Buffer [Index * 4];
+ *Dest = __readfsdword (Address + Index * 4);
+ _mm_mfence ();
+ }
+}
+
+//----------------------------------------------------------------------------
+// MemUDummyCLRead:
+//
+// Perform a single cache line read from a given physical address.
+//
+// In: Address - Physical address to be read
+// ClCount - number of cachelines to be read
+
+//FUNC_ATTRIBUTE (noinline)
+VOID
+MemUDummyCLRead (
+ IN UINT32 Address
+ )
+{
+ _mm_sfence ();
+ __readfsbyte (Address);
+}
+
+//----------------------------------------------------------------------------
+
+VOID
+MemUMFenceInstr (
+ VOID
+ )
+{
+ _mm_mfence ();
+}
+
+//----------------------------------------------------------------------------
+// MemUFlushPattern:
+//
+// Flush a pattern of 72 bit times (per DQ) from cache. This procedure is used
+// to ensure cache miss on the next read training.
+//
+// In: Address - Physical address to be flushed
+// ClCount - number of cachelines to be flushed
+//FUNC_ATTRIBUTE(noinline)
+VOID
+MemUFlushPattern (
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ )
+{
+ UINTN Index;
+
+ // ssd - theory: a tlb flush is needed to avoid problems with clflush
+ __writemsr (0x20F, __readmsr (0x20F));
+
+ for (Index = 0; Index < ClCount; Index++) {
+ // mfence prevents speculative execution of the clflush
+ _mm_mfence ();
+ _mm_clflush_fs ((void *) (size_t) (Address + Index * 64));
+ }
+}
+
+//----------------------------------------------------------------------------
+
+//FUNC_ATTRIBUTE(noinline)
+VOID
+AlignPointerTo16Byte (
+ IN OUT UINT8 **BufferPtrPtr
+ )
+{
+ size_t Address = (size_t) *BufferPtrPtr;
+ Address += 15;
+ Address -= Address % 16;
+ *BufferPtrPtr = (void *) Address;
+}
+
+//----------------------------------------------------------------------------
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/muc.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/muc.c
new file mode 100644
index 0000000..8d81773
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Main/muc.c
@@ -0,0 +1,760 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * muc.c
+ *
+ * Utility functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Main)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "cpuServices.h"
+#include "amdlib.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mu.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuCacheInit.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_MAIN_MUC_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+CONST UINT32 Pattern2[16] = {
+ 0x12345678, 0x87654321, 0x23456789, 0x98765432,
+ 0x59385824, 0x30496724, 0x24490795, 0x99938733,
+ 0x40385642, 0x38465245, 0x29432163, 0x05067894,
+ 0x12349045, 0x98723467, 0x12387634, 0x34587623
+};
+
+CONST UINT32 MaxLatPat[48] = {
+ 0x6E0E3FAC, 0x0C3CFF52,
+ 0x4A688181, 0x49C5B613,
+ 0x7C780BA6, 0x5C1650E3,
+ 0x0C4F9D76, 0x0C6753E6,
+ 0x205535A5, 0xBABFB6CA,
+ 0x610E6E5F, 0x0C5F1C87,
+ 0x488493CE, 0x14C9C383,
+ 0xF5B9A5CD, 0x9CE8F615,
+
+ 0xAAD714B5, 0xC38F1B4C,
+ 0x72ED647C, 0x669F7562,
+ 0x5233F802, 0x4A898B30,
+ 0x10A40617, 0x3326B465,
+ 0x55386E04, 0xC807E3D3,
+ 0xAB49E193, 0x14B4E63A,
+ 0x67DF2495, 0xEA517C45,
+ 0x7624CE51, 0xF8140C51,
+
+ 0x4824BD23, 0xB61DD0C9,
+ 0x072BCFBE, 0xE8F3807D,
+ 0x919EA373, 0x25E30C47,
+ 0xFEB12958, 0x4DA80A5A,
+ 0xE9A0DDF8, 0x792B0076,
+ 0xE81C73DC, 0xF025B496,
+ 0x1DB7E627, 0x808594FE,
+ 0x82668268, 0x655C7783
+};
+
+CONST UINT8 PatternJD[9] = {0x44, 0xA6, 0x38, 0x4F, 0x4B, 0x2E, 0xEF, 0xD5, 0x54};
+
+CONST UINT8 PatternJD_256[256] = {
+ 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0x00, 0x00,
+ 0xFF, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF,
+ 0xFF, 0x00, 0xFF, 0xFF, 0xFF, 0x00, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0x00, 0xF7, 0x08, 0xF7, 0x00, 0xFF,
+ 0x00, 0xF7, 0x00, 0xFF, 0x00, 0xF7, 0x00, 0xF7,
+ 0x08, 0xF7, 0x08, 0xFF, 0x00, 0xFF, 0x08, 0xFF,
+ 0x00, 0xFF, 0x08, 0xFF, 0x08, 0xF7, 0xFB, 0x04,
+ 0xFB, 0xFB, 0x04, 0xFB, 0xFB, 0xFB, 0x04, 0xFB,
+ 0xFB, 0xFB, 0xFB, 0x04, 0xFB, 0x04, 0x04, 0xFB,
+ 0x04, 0x04, 0x04, 0xFB, 0x04, 0x04, 0x04, 0x04,
+ 0xFB, 0x7F, 0x80, 0x7F, 0x00, 0xFF, 0x00, 0x7F,
+ 0x00, 0xFF, 0x00, 0x7F, 0x00, 0x7F, 0x80, 0x7F,
+ 0x80, 0xFF, 0x00, 0xFF, 0x80, 0xFF, 0x00, 0xFF,
+ 0x80, 0xFF, 0x80, 0x7F, 0xBF, 0x40, 0xBF, 0xBF,
+ 0x40, 0xBF, 0xBF, 0xBF, 0x40, 0xBF, 0xBF, 0xBF,
+ 0xBF, 0x40, 0xBF, 0x40, 0x40, 0xBF, 0x40, 0x40,
+ 0x40, 0xBF, 0x40, 0x40, 0x40, 0x40, 0xBF, 0xFD,
+ 0x02, 0xFD, 0x00, 0xFF, 0x00, 0xFD, 0x00, 0xFF,
+ 0x00, 0xFD, 0x00, 0xFD, 0x02, 0xFD, 0x02, 0xFF,
+ 0x00, 0xFF, 0x02, 0xFF, 0x00, 0xFF, 0x02, 0xFF,
+ 0x02, 0xFD, 0xFE, 0x01, 0xFE, 0xFE, 0x01, 0xFE,
+ 0xFE, 0xFE, 0x01, 0xFE, 0xFE, 0xFE, 0xFE, 0x01,
+ 0xFE, 0x01, 0x01, 0xFE, 0x01, 0x01, 0x01, 0xFE,
+ 0x01, 0x01, 0x01, 0x01, 0xFE, 0xDF, 0x20, 0xDF,
+ 0x00, 0xFF, 0x00, 0xDF, 0x00, 0xFF, 0x00, 0xDF,
+ 0x00, 0xDF, 0x20, 0xDF, 0x20, 0xFF, 0x00, 0xFF,
+ 0x20, 0xFF, 0x00, 0xFF, 0x20, 0xFF, 0x20, 0xDF,
+ 0xEF, 0x10, 0xEF, 0xEF, 0x10, 0xEF, 0xEF, 0xEF,
+ 0x10, 0xEF, 0xEF, 0xEF, 0xEF, 0x10, 0xEF, 0x10,
+ 0x10, 0xEF, 0x10, 0x10, 0x10, 0xEF, 0x10, 0x10,
+ 0x10, 0x10, 0xEF, 0xF7, 0x00, 0xFF, 0x04, 0x7F,
+ 0x00, 0xFF, 0x40, 0xFD, 0x00, 0xFF, 0x01, 0xDF
+};
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function returns the (index)th UINT8
+ * from an indicated test pattern.
+ *
+ * @param[in] Pattern - encoding of test pattern type
+ * @param[in] Buffer[] - buffer to be filled
+ * @param[in] Size - Size of the buffer
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID
+MemUFillTrainPattern (
+ IN TRAIN_PATTERN Pattern,
+ IN UINT8 Buffer[],
+ IN UINT16 Size
+ )
+{
+ UINT8 Result;
+ UINT8 i;
+ UINT8 Mask;
+ UINT16 Index;
+ UINT16 k;
+
+ for (Index = 0; Index < Size; Index++) {
+ k = Index;
+ // get one byte from Pattern
+ switch (Pattern) {
+ case TestPattern0:
+ Result = 0xAA;
+ break;
+ case TestPattern1:
+ Result = 0x55;
+ break;
+ case TestPattern2:
+ ASSERT (Index < sizeof (Pattern2));
+ Result = ((UINT8 *)Pattern2)[Index];
+ break;
+ case TestPatternML:
+ if (Size != 6 * 64) {
+ Result = ((UINT8 *)MaxLatPat)[Index];
+ } else {
+ Result = ((UINT8 *)MaxLatPat)[Index & 0xF7];
+ }
+ break;
+ case TestPatternJD256B:
+ k >>= 1;
+ // break is not being used here because TestPatternJD256B also need
+ // to run TestPatternJD256A sequence.
+ case TestPatternJD256A:
+ k >>= 3;
+ ASSERT (k < sizeof (PatternJD_256));
+ Result = PatternJD_256[k];
+ break;
+ case TestPatternJD1B:
+ k >>= 1;
+ // break is not being used here because TestPatternJD1B also need
+ // to run TestPatternJD1A sequence.
+ case TestPatternJD1A:
+ k >>= 3;
+ i = (UINT8) (k >> 3);
+ Mask = (UINT8) (0x80 >> (k & 7));
+
+ if (i == 0) {
+ Result = 0;
+ } else {
+ Result = (UINT16)1 << (i - 1);
+ }
+
+ ASSERT (i < sizeof (PatternJD));
+ if (PatternJD[i] & Mask) {
+ Result = ~Result;
+ }
+ break;
+ case TestPattern3:
+ Result = 0x36;
+ break;
+ case TestPattern4:
+ Result = 0xC9;
+ break;
+ default:
+ Result = 0;
+ IDS_ERROR_TRAP;
+ }
+
+ // fill in the Pattern buffer
+ Buffer[Index] = Result;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function flushes cache lines
+ *
+ * @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ * @param[in] ClCount - Number of cache lines
+ * @param[in] Address - System Address [47:16]
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID
+MemUProcIOClFlush (
+ IN UINT32 Address,
+ IN UINT16 ClCount,
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ )
+{
+ MemUSetTargetWTIO (Address, MemPtr);
+ MemUFlushPattern (MemUSetUpperFSbase (Address, MemPtr), ClCount);
+ MemUResetTargetWTIO (MemPtr);
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the upper 32-bits of the Base address, 4GB aligned) for the FS selector.
+ * @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ * @param[in] Address - System Address [47:16]
+ *
+ * @return Address - Lowest 32-bit of physical address
+ * ----------------------------------------------------------------------------
+ */
+
+UINT32
+MemUSetUpperFSbase (
+ IN UINT32 Address,
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ )
+{
+ S_UINT64 SMsr;
+
+ SMsr.lo = 0;
+ SMsr.hi = Address >> 16;
+ LibAmdMsrWrite (FS_BASE, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+ return Address << 16;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function resets the target address space to Write Through IO by disabling IORRs
+ *
+ * @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID
+MemUResetTargetWTIO (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ )
+{
+ S_UINT64 SMsr;
+ SMsr.hi = 0;
+ SMsr.lo = 0;
+ LibAmdMsrWrite (IORR0_MASK, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the target range to WT IO (using an IORR overlapping
+ * the already existing
+ *
+ * @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ * @param[in] Address - System Address [47:16]
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID
+MemUSetTargetWTIO (
+ IN UINT32 Address,
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ )
+{
+ S_UINT64 SMsr;
+
+ SMsr.lo = Address << 16;
+ SMsr.hi = Address >> 16;
+ LibAmdMsrWrite (IORR0_BASE,(UINT64 *)&SMsr, &MemPtr->StdHeader); // IORR0 Base
+ SMsr.hi = 0xFFFF;
+ SMsr.lo = 0xFC000800;
+ LibAmdMsrWrite (IORR0_MASK, (UINT64 *)&SMsr, &MemPtr->StdHeader); // 64MB Mask
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Waits specified number of 10ns cycles
+ * @param[in,out] MemPtr - pointer to MEM_DATA_STRUCTURE
+ * @param[in] Count - Number of 10ns cycles to wait; Note that Count must not exceed 1000000
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID
+MemUWait10ns (
+ IN UINT32 Count,
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ )
+{
+ UINT64 TargetTsc;
+ UINT64 CurrentTsc;
+
+ ASSERT (Count <= 1000000);
+
+ MemUMFenceInstr ();
+
+ LibAmdMsrRead (TSC, &CurrentTsc, &MemPtr->StdHeader);
+ TargetTsc = CurrentTsc + ((Count * MemPtr->TscRate + 99) / 100);
+ IEM_SKIP_CODE (IEM_WAIT) {
+ do {
+ LibAmdMsrRead (TSC, &CurrentTsc, &MemPtr->StdHeader);
+ } while (CurrentTsc < TargetTsc);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Find the entry of platform specific overriding table.
+ *
+ * @param[in] PlatformMemoryConfiguration - Platform config table
+ * @param[in] EntryType - Entry type
+ * @param[in] SocketID - Physical socket ID
+ * @param[in] ChannelID - Physical channel ID
+ * @param[in] DimmID - Physical Dimm ID
+ * @param[in] *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ * @param[in,out] *StdHeader - Pointer of AMD_CONFIG_PARAMS
+ * - If both *LogicalIdPtr and *StdHeader are "NULL" input,
+ * that means, the "EntryType" are not CPU family dependent,
+ * ex. PSO_MAX_DIMMS for NUMBER_OF_DIMMS_SUPPORTED macro.
+ *
+ *
+ * @return NULL - entry could not be found.
+ * @return Pointer - points to the entry's data.
+ *
+ * ----------------------------------------------------------------------------
+ */
+
+VOID *
+FindPSOverrideEntry (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN PSO_ENTRY EntryType,
+ IN UINT8 SocketID,
+ IN UINT8 ChannelID,
+ IN UINT8 DimmID,
+ IN CPU_LOGICAL_ID *LogicalIdPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *Buffer;
+ CPU_LOGICAL_ID LogicalCpuId;
+ UINT32 RawCpuId;
+
+ LogicalCpuId.Family = AMD_FAMILY_UNKNOWN;
+ LogicalCpuId.Revision = 0;
+ RawCpuId = 0;
+
+ Buffer = PlatformMemoryConfiguration;
+ //
+ // Do not need to look for CPU family specific PSO if LogicalIdPtr and StdHeader are NULL.
+ //
+ if ((LogicalIdPtr != NULL) && (StdHeader != NULL)) {
+ //
+ // Looking for the CPU family signature followed by CPUID value.
+ // And check to see if the CPUID value is matched with current CPU's :
+ // - If matched, Buffer points to following PSO macros' start address.
+ // - If not matched, Buffer points to PlatformMemoryConfiguration for global PSO parsing.
+ //
+ while (Buffer[0] != PSO_END) {
+ if (Buffer[0] == PSO_CPU_FAMILY_TO_OVERRIDE) {
+ RawCpuId = *(UINT32 *)&Buffer[2];
+ GetLogicalIdFromCpuid (RawCpuId, &LogicalCpuId, StdHeader);
+ if ((LogicalCpuId.Family & LogicalIdPtr->Family) != 0) {
+ if ((LogicalCpuId.Revision & LogicalIdPtr->Revision) != 0) {
+ Buffer += Buffer[1] + 2;
+ break;
+ }
+ }
+ }
+ Buffer += Buffer[1] + 2;
+ }
+ //
+ // If no CPU family specific PSO macros exist, Buffer points to PlatformMemoryConfiguration again
+ //
+ if (Buffer[0] == PSO_END) {
+ Buffer = PlatformMemoryConfiguration;
+ }
+ }
+
+ while ((Buffer[0] != PSO_END) && (Buffer[0] != PSO_CPU_FAMILY_TO_OVERRIDE)) {
+ if (Buffer[0] == EntryType) {
+ if ((Buffer[2] & ((UINT8) 1 << SocketID)) != 0 ) {
+ if ((Buffer[3] & ((UINT8) 1 << ChannelID)) != 0 ) {
+ if ((Buffer[4] & ((UINT8) 1 << DimmID)) != 0 ) {
+ return &Buffer[5];
+ }
+ }
+ }
+ }
+ Buffer += Buffer[1] + 2;
+ }
+
+ return NULL;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns the max dimms for a given memory channel on a given
+ * processor. It first searches the platform override table for the max dimms
+ * value. If it is not provided, the AGESA default value is returned. The target
+ * socket must be a valid present socket.
+ *
+ * @param[in] PlatformMemoryConfiguration - Platform config table
+ * @param[in] SocketID - ID of the processor that owns the channel
+ * @param[in] ChannelID - Channel to get max dimms for
+ *
+ *
+ * @return UINT8 - Max Number of Dimms for that channel
+ */
+UINT8
+GetMaxDimmsPerChannel (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 SocketID,
+ IN UINT8 ChannelID
+ )
+{
+ UINT8 *DimmsPerChPtr;
+ UINT8 MaxDimmPerCH;
+
+ DimmsPerChPtr = FindPSOverrideEntry (PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, ChannelID, 0, NULL, NULL);
+ if (DimmsPerChPtr != NULL) {
+ MaxDimmPerCH = *DimmsPerChPtr;
+ } else {
+ MaxDimmPerCH = MAX_DIMMS_PER_CHANNEL;
+ }
+ // Maximum number of dimms per channel cannot be larger than its default value.
+ ASSERT (MaxDimmPerCH <= MAX_DIMMS_PER_CHANNEL);
+
+ return MaxDimmPerCH;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns the max soldered-down dimms for a given memory channel on a given
+ * processor. It first searches the platform override table for the soldered-down dimms
+ * value. If it is not provided, the AGESA default value is returned. The target
+ * socket must be a valid present socket.
+ *
+ * @param[in] PlatformMemoryConfiguration - Platform config table
+ * @param[in] SocketID - ID of the processor that owns the channel
+ * @param[in] ChannelID - Channel to get max dimms for
+ *
+ *
+ * @return UINT8 - Max Number of soldered-down dimms for that channel
+ */
+UINT8
+GetMaxSolderedDownDimmsPerChannel (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 SocketID,
+ IN UINT8 ChannelID
+ )
+{
+ UINT8 *DimmsPerChPtr;
+ UINT8 MaxSolderedDownDimmPerCH;
+
+ DimmsPerChPtr = FindPSOverrideEntry (PlatformMemoryConfiguration, PSO_MAX_SOLDERED_DOWN_DIMMS, SocketID, ChannelID, 0, NULL, NULL);
+ if (DimmsPerChPtr != NULL) {
+ MaxSolderedDownDimmPerCH = *DimmsPerChPtr;
+ } else {
+ MaxSolderedDownDimmPerCH = 0;
+ }
+ // Maximum number of dimms per channel cannot be larger than its default value.
+ ASSERT (MaxSolderedDownDimmPerCH <= MAX_DIMMS_PER_CHANNEL);
+
+ return MaxSolderedDownDimmPerCH;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns the max memory channels on a given processor.
+ * It first searches the platform override table for the max channels value.
+ * If it is not provided, the AGESA default value is returned.
+ *
+ * @param[in] PlatformMemoryConfiguration - Platform config table
+ * @param[in] SocketID - ID of the processor
+ * @param[in] StdHeader - Header for library and services
+ *
+ *
+ * @return UINT8 - Max Number of Channels on that Processor
+ */
+UINT8
+GetMaxChannelsPerSocket (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 SocketID,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 *ChannelsPerSocketPtr;
+ UINT8 MaxChannelsPerSocket;
+
+ if (IsProcessorPresent (SocketID, StdHeader)) {
+ ChannelsPerSocketPtr = FindPSOverrideEntry (PlatformMemoryConfiguration, PSO_MAX_CHNLS, SocketID, 0, 0, NULL, NULL);
+ if (ChannelsPerSocketPtr != NULL) {
+ MaxChannelsPerSocket = *ChannelsPerSocketPtr;
+ } else {
+ MaxChannelsPerSocket = MAX_CHANNELS_PER_SOCKET;
+ }
+ // Maximum number of channels per socket cannot be larger than its default value.
+ ASSERT (MaxChannelsPerSocket <= MAX_CHANNELS_PER_SOCKET);
+ } else {
+ MaxChannelsPerSocket = 0;
+ }
+
+ return MaxChannelsPerSocket;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns the max number of chip select on a given channel of
+ * a given processor. It first searches the platform override table for the max
+ * chip select value. If it is not provided, the AGESA default value is returned.
+ * The target socket must be a valid present socket.
+ *
+ * @param[in] PlatformMemoryConfiguration - Platform config table
+ * @param[in] SocketID - ID of the processor
+ * @param[in] ChannelID - ID of a channel
+ *
+ *
+ * @return UINT8 - Max Number of chip selects on the channel of the Processor
+ */
+UINT8
+GetMaxCSPerChannel (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 SocketID,
+ IN UINT8 ChannelID
+ )
+{
+ UINT8 *CSPerSocketPtr;
+ UINT8 MaxCSPerChannel;
+
+ CSPerSocketPtr = FindPSOverrideEntry (PlatformMemoryConfiguration, PSO_MAX_CHIPSELS, SocketID, ChannelID, 0, NULL, NULL);
+ if (CSPerSocketPtr != NULL) {
+ MaxCSPerChannel = *CSPerSocketPtr;
+ } else {
+ MaxCSPerChannel = MAX_CS_PER_CHANNEL;
+ }
+ // Max chip select per channel cannot be larger than its default value
+ ASSERT (MaxCSPerChannel <= MAX_CS_PER_CHANNEL);
+
+ return MaxCSPerChannel;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns the index of the first Dimm SPD structure for a
+ * given processor socket. It checks the Max Dimms per channel for every memory
+ * channel on every processor up to the current one, and adds them together.
+ *
+ * This function may also be used to calculate the maximum dimms per system
+ * by passing the total number of dimm sockets
+ *
+ * @param[in] PlatformMemoryConfiguration - Platform config table
+ * @param[in] SocketID - ID of the processor
+ * @param[in] StdHeader - Header for library and services
+ *
+ * @return UINT8 - SPD Index
+ */
+UINT8
+GetSpdSocketIndex (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 SocketID,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 SpdSocketIndex;
+ UINT8 Socket;
+ UINT8 Channel;
+ UINT8 MaxChannelsPerSocket;
+
+ SpdSocketIndex = 0;
+ for (Socket = 0; Socket < SocketID; Socket++) {
+ MaxChannelsPerSocket = GetMaxChannelsPerSocket (PlatformMemoryConfiguration, Socket, StdHeader);
+ for (Channel = 0; Channel < MaxChannelsPerSocket; Channel++) {
+ SpdSocketIndex = SpdSocketIndex + GetMaxDimmsPerChannel (PlatformMemoryConfiguration, Socket, Channel);
+ }
+ }
+ return SpdSocketIndex;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns the index of the first Dimm SPD structure for a
+ * given channel relative to the processor socket. It checks the Max Dimms per
+ * channel for every memory channel on that processor up to the current one,
+ * and adds them together.
+ *
+ * This function may also be used to calculate the maximum dimms per system
+ * by passing the total number of DIMM sockets
+ *
+ * @param[in] PlatformMemoryConfiguration - Platform config table
+ * @param[in] SocketID - ID of the processor
+ * @param[in] ChannelID - ID of the Channel
+ * @param[in] StdHeader - Header for library and services
+ *
+ * @return UINT8 - SPD Index
+ */
+UINT8
+GetSpdChannelIndex (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 SocketID,
+ IN UINT8 ChannelID,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 SpdChannelIndex;
+ UINT8 Channel;
+
+ SpdChannelIndex = 0;
+ ASSERT (ChannelID < GetMaxChannelsPerSocket (PlatformMemoryConfiguration, SocketID, StdHeader))
+ for (Channel = 0; Channel < ChannelID; Channel++) {
+ SpdChannelIndex = SpdChannelIndex + GetMaxDimmsPerChannel (PlatformMemoryConfiguration, SocketID, Channel);
+ }
+ return SpdChannelIndex;
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ * This function returns the upper 32 bits mask for variable MTRR based on
+ * the CPU_LOGICAL_ID.
+ * @param[in] *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ * @param[in] StdHeader - Header for library and services
+ *
+ * @return UINT32 - MTRR mask for upper 32 bits
+ *
+ */
+UINT32
+GetVarMtrrHiMsk (
+ IN CPU_LOGICAL_ID *LogicalIdPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ )
+{
+ UINT8 TempNotCare;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ CONST CACHE_INFO *CacheInfoPtr;
+
+ GetCpuServicesFromLogicalId (LogicalIdPtr, (CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, StdHeader);
+ FamilySpecificServices->GetCacheInfo (FamilySpecificServices, (CONST VOID **) &CacheInfoPtr, &TempNotCare, StdHeader);
+ return (UINT32) (CacheInfoPtr->VariableMtrrMask >> 32);
+}
+
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ * This function returns number of memclk converted from ns
+ * @param[in] Speed - memclk frequency
+ * @param[in] NumberOfns - number of ns to be converted
+ *
+ * @return UINT32 - number of memclk
+ *
+ */
+UINT32
+MemUnsToMemClk (
+ IN UINT32 Speed,
+ IN UINT32 NumberOfns
+ )
+{
+ return (UINT32) ((NumberOfns * Speed + 999) / 1000);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnS3kb.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnS3kb.h
new file mode 100644
index 0000000..ac11e67
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnS3kb.h
@@ -0,0 +1,84 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnS3kb.h
+ *
+ * S3 resume memory related function for KB.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/KB)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _MNS3KB_H_
+#define _MNS3KB_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+/// ID for register list of KB
+typedef enum {
+ PCI_LST_ESR_KB, ///< Assign 0x0000 for PCI register list for pre exit self refresh.
+ PCI_LST_KB, ///< Assign 0x0001 for PCI register list for post exist self refresh.
+ CPCI_LST_ESR_KB, ///< Assign 0x0002 for conditional PCI register list for pre exit self refresh.
+ CPCI_LST_KB, ///< Assign 0x0003 for conditional PCI register list for post exit self refresh.
+ MSR_LST_ESR_KB, ///< Assign 0x0004 for MSR register list for pre exit self refresh.
+ MSR_LST_KB, ///< Assign 0x0005 for MSR register list for post exit self refresh.
+ CMSR_LST_ESR_KB, ///< Assign 0x0006 for conditional MSR register list for pre exit self refresh.
+ CMSR_LST_KB ///< Assign 0x0007 for conditional MSR register list for post exit self refresh.
+} RegisterListIDKB;
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define SET_S3_NB_PSTATE_OFFSET(Offset, NBPstate) ((NBPstate << 10) | Offset)
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif //_MNS3KB_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mndctkb.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mndctkb.c
new file mode 100644
index 0000000..819fb20
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mndctkb.c
@@ -0,0 +1,1217 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mndctkb.c
+ *
+ * Northbridge DCT support for KB
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/KB)
+ * @e \$Revision: 86880 $ @e \$Date: 2013-01-28 11:15:07 -0600 (Mon, 28 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mnkb.h"
+#include "mftds.h"
+#include "merrhdl.h"
+#include "cpuFamRegisters.h"
+#include "GeneralServices.h"
+#include "cpuFamilyTranslation.h"
+#include "cpuF16Utilities.h"
+#include "IdsF16KbAllService.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_KB_MNDCTKB_FILECODE
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+
+CONST BIT_FIELD_NAME MemPstateBF[4] = {BFMemPstate0, BFMemPstate1, BFMemPstate2, BFMemPstate3};
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+UINT32
+STATIC
+MemNTotalSyncComponentsKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function programs the memory controller with configuration parameters
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - An Error value lower than AGESA_FATAL may have occurred
+ * @return FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred
+ * @return NBPtr->MCTPtr->ErrCode - Contains detailed AGESA_STATUS value
+ */
+
+BOOLEAN
+MemNAutoConfigKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 i;
+ DIE_STRUCT *MCTPtr;
+ DCT_STRUCT *DCTPtr;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ UINT32 PowerDownMode;
+ UINT32 Tstag;
+
+ RefPtr = NBPtr->RefPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ DCTPtr = NBPtr->DCTPtr;
+
+ //
+ //======================================================================
+ // Build Dram Config Lo Register Value
+ //======================================================================
+ MemNSetBitFieldNb (NBPtr, BFUnBuffDimm, 1);
+ MemNSetBitFieldNb (NBPtr, BFPendRefPaybackS3En, 1);
+ MemNSetBitFieldNb (NBPtr, BFStagRefEn, 1);
+ //
+ // DimmEccEn
+ //
+ if (MCTPtr->Status[SbEccDimms]) {
+ MemNSetBitFieldNb (NBPtr, BFDimmEccEn, 1);
+ }
+ //
+ //======================================================================
+ // Build Dram Config Hi Register Value
+ //======================================================================
+ //
+ //
+ // MemClkFreq
+ //
+ MemNSetBitFieldNb (NBPtr, BFMemClkFreq, MemNGetMemClkFreqIdUnb (NBPtr, DCTPtr->Timings.Speed));
+
+ PowerDownMode = 1;
+ IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(NBPtr->MemPtr->StdHeader));
+ MemNSetBitFieldNb (NBPtr, BFPowerDownMode, PowerDownMode);
+
+ if (NBPtr->MemPstateStage == MEMORY_PSTATE_1ST_STAGE) {
+ MemNBrdcstSetNb (NBPtr, BFM1MemClkFreq, MemNGetMemClkFreqIdUnb (NBPtr, DDR667_FREQUENCY));
+ MemNSetBitFieldNb (NBPtr, BFDphyMemPsSelEn, 0);
+ MemNBrdcstSetNb (NBPtr, BFRate, MemNGetMemClkFreqIdUnb (NBPtr, DDR667_FREQUENCY) | 0x8);
+ MemNBrdcstSetNb (NBPtr, BFMxMrsEn, 7);
+ }
+
+ MemNSetBitFieldNb (NBPtr, BFDphyMemPsSelEn, 1);
+ //
+ //======================================================================
+ // Build Dram MRS Register Value
+ //======================================================================
+ //
+ MemNSetBitFieldNb (NBPtr, BFPchgPDModeSel, 1);
+ MemNSetBitFieldNb (NBPtr, BFBurstCtrl, 1);
+
+ //======================================================================
+ // DRAM Controller Miscellaneous 2
+ //======================================================================
+ MemNSetBitFieldNb (NBPtr, BFPerRankTimingEn, 1);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\nEnable Per Rank Training....\n\n");
+ MemNSetBitFieldNb (NBPtr, BFPrtlChPDEnhEn, 0);
+ MemNSetBitFieldNb (NBPtr, BFAggrPDEn, 1);
+ MemNSetBitFieldNb (NBPtr, BFDctSelBankSwap, 1);
+
+ //======================================================================
+ // Trace Buffer Extended Address Initialization
+ //======================================================================
+ MemNSetBitFieldNb (NBPtr, BFTrcBufAdrPtrHi, 0);
+ MemNSetBitFieldNb (NBPtr, BFTrcBufDramLimitHi, 0);
+ MemNSetBitFieldNb (NBPtr, BFTrcBufDramBaseHi, 0);
+
+ //======================================================================
+ // GMC to DCT control
+ //======================================================================
+ MemNSetBitFieldNb (NBPtr, BFGmcTokenLimit, 4);
+ MemNSetBitFieldNb (NBPtr, BFMctTokenLimit, 4);
+ MemNSetBitFieldNb (NBPtr, BFGmcToDctControl1, 0x04040404);
+ MemNSetBitFieldNb (NBPtr, BFCpuElevPrioPeriod, 0xC);
+ MemNSetBitFieldNb (NBPtr, BFCpuElevPrioDis, 0);
+
+ //======================================================================
+ // Other Registers
+ //======================================================================
+ //
+ //
+ // Non-SPD Timings
+ //
+ MemNSetBitFieldNb (NBPtr, BFTrwtWB, 0x17);
+ MemNSetBitFieldNb (NBPtr, BFTrwtTO, 0x16);
+ MemNSetBitFieldNb (NBPtr, BFTwrrd, 0xB );
+
+ MemNSetBitFieldNb (NBPtr, BFTrdrdSdSc, 0xB);
+ MemNSetBitFieldNb (NBPtr, BFTrdrdSdDc, 0xB);
+ MemNSetBitFieldNb (NBPtr, BFTrdrdDd, 0xB);
+
+ MemNSetBitFieldNb (NBPtr, BFTwrwrSdSc, 0xB);
+ MemNSetBitFieldNb (NBPtr, BFTwrwrSdDc, 0xB);
+ MemNSetBitFieldNb (NBPtr, BFTwrwrDd, 0xB);
+
+ MemNSetBitFieldNb (NBPtr, BFWrOdtOnDuration, DEFAULT_WR_ODT_KB);
+ MemNSetBitFieldNb (NBPtr, BFRdOdtOnDuration, DEFAULT_RD_ODT_KB);
+ MemNSetBitFieldNb (NBPtr, BFWrOdtTrnOnDly, DEFAULT_RD_ODT_TRNONDLY_KB);
+
+ // Tstag = BIOS: MAX(D18F2x204_dct[0]_mp[1:0][Trrd], CEIL(D18F2x204_dct[0]_mp[1:0][FourActWindow]/4))
+ Tstag = MAX (MemNGetBitFieldNb (NBPtr, BFTrrd), (MemNGetBitFieldNb (NBPtr, BFFourActWindow) + 3) / 4);
+ for (i = 0; i < 4; i++) {
+ MemNSetBitFieldNb (NBPtr, BFTstag0 + i, Tstag);
+ }
+
+ MemNSetBitFieldNb (NBPtr, BFTmrd, 4);
+ MemNSetBitFieldNb (NBPtr, BFFlushWrOnS3StpGnt, 1);
+ MemNSetBitFieldNb (NBPtr, BFFastSelfRefEntryDis, 0);
+
+ return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function caps speed based on battery life check.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNCapSpeedBatteryLifeKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ CONST UINT16 SupportedFreq[] = {
+ DDR2133_FREQUENCY,
+ DDR1866_FREQUENCY,
+ DDR1600_FREQUENCY,
+ DDR1333_FREQUENCY,
+ DDR1066_FREQUENCY,
+ DDR800_FREQUENCY,
+ DDR667_FREQUENCY
+ };
+
+ UINT32 FreqNumeratorInMHz;
+ UINT32 FreqDivisor;
+ UINT32 VoltageInuV;
+ UINT32 NBFreq;
+ UINT16 DdrFreq;
+ UINT16 j;
+ UINT8 Dct;
+ INT8 NbPs;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ FamilySpecificServices = NULL;
+ GetCpuServicesOfSocket (NBPtr->MCTPtr->SocketId, (CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &(NBPtr->MemPtr->StdHeader));
+
+
+ // Find the lowest supported NB Pstate
+ NBFreq = 0;
+ for (NbPs = 3; NbPs >= 0; NbPs--) {
+ if (FamilySpecificServices->GetNbPstateInfo (FamilySpecificServices,
+ NBPtr->MemPtr->PlatFormConfig,
+ &NBPtr->PciAddr,
+ (UINT32) NbPs,
+ &FreqNumeratorInMHz,
+ &FreqDivisor,
+ &VoltageInuV,
+ &(NBPtr->MemPtr->StdHeader))) {
+ if (MemNGetBitFieldNb (NBPtr, MemPstateBF[NbPs]) == 0) {
+ NBFreq = FreqNumeratorInMHz / FreqDivisor;
+ break;
+ }
+ }
+ }
+
+ ASSERT (NBFreq > 0);
+
+ // Pick Max MEMCLK that is less than or equal to NCLK
+ DdrFreq = DDR800_FREQUENCY;
+ for (j = 0; j < GET_SIZE_OF (SupportedFreq); j++) {
+ if (NBFreq >= ((UINT32) SupportedFreq[j]) && NBFreq <= ((UINT32) SupportedFreq[j] * 2)) {
+ DdrFreq = SupportedFreq[j];
+ break;
+ }
+ }
+ ASSERT (j < GET_SIZE_OF (SupportedFreq));
+
+ // Cap MemClk frequency to lowest NCLK frequency
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.TargetSpeed > DdrFreq) {
+ NBPtr->DCTPtr->Timings.TargetSpeed = DdrFreq;
+ }
+ }
+
+ // Initialize NbPsCtlReg
+ NBPtr->NbPsCtlReg = 0;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function retrieves the Max latency parameters
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @param[in] *MinDlyPtr - Pointer to variable to store the Minimum Delay value
+ * @param[in] *MaxDlyPtr - Pointer to variable to store the Maximum Delay value
+ * @param[in] *DlyBiasPtr - Pointer to variable to store Delay Bias value
+ * @param[in] MaxRcvEnDly - Maximum receiver enable delay value
+ */
+
+VOID
+MemNGetMaxLatParamsKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT16 MaxRcvEnDly,
+ IN OUT UINT16 *MinDlyPtr,
+ IN OUT UINT16 *MaxDlyPtr,
+ IN OUT UINT16 *DlyBiasPtr
+ )
+{
+ UINT32 N;
+ UINT32 T;
+ UINT32 P;
+ UINT32 MemClkPeriod;
+
+ // 1. P = N = T = 0.
+ P = N = T = 0;
+
+ // Get all sync components BKDG steps 3,4,6
+ P = MemNTotalSyncComponentsKB (NBPtr);
+
+ // 8. P = P + CEIL(MAX(D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] +
+ // D18F2x9C_x0000_0[3:0]0[7:5]_dct[1:0][RdDqsTime] PCLKs)) + 1
+ P = P + (MaxRcvEnDly + 31) / 32 + 1;
+
+ // 11. N = (P/(MemClkFreq * 2) + T) * NclkFreq; Convert from PCLKs plus time to NCLKs.
+ MemClkPeriod = 1000000 / ((NBPtr->MemPstate == MEMORY_PSTATE0) ? NBPtr->DCTPtr->Timings.Speed : DDR667_FREQUENCY);
+ N = ((((P * MemClkPeriod + 1) / 2) + T) * NBPtr->NBClkFreq + 999999) / 1000000;
+
+ // Calculate a starting MaxRdLatency delay value with steps 5, 9, and 12 excluded
+ *MinDlyPtr = (UINT16) N;
+
+ *MaxDlyPtr = 0x3FF;
+
+ // Program D18F2x210_dct[0]_nbp[3:0][MaxRdLatency] = CEIL(current value + 1 NCLK + 1.5 MEMCLK +
+ // IF (NclkFreq/MemClkFreq < 2) THEN 1 MEMCLK ELSE 0 ENDIF)
+ N = 1;
+ P = 3 + (((NBPtr->NBClkFreq / ((NBPtr->MemPstate == MEMORY_PSTATE0) ? NBPtr->DCTPtr->Timings.Speed : DDR667_FREQUENCY)) < 2) ? 2 : 0);
+ N += (((P * MemClkPeriod + 1) / 2) * NBPtr->NBClkFreq + 999999) / 1000000;
+ *DlyBiasPtr = (UINT16) N;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets the maximum round-trip latency in the system from the processor to the DRAM
+ * devices and back.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] MaxRcvEnDly - Maximum receiver enable delay value
+ *
+ */
+
+VOID
+MemNSetMaxLatencyKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT16 MaxRcvEnDly
+ )
+{
+ UINT32 N;
+ UINT32 T;
+ UINT32 P;
+ UINT32 Px2;
+ UINT32 MemClkPeriod;
+
+ AGESA_TESTPOINT (TpProcMemRcvrCalcLatency, &(NBPtr->MemPtr->StdHeader));
+
+ //
+ // Initial value for MaxRdLat used in training
+ //
+ N = 0x55;
+
+ if (MaxRcvEnDly != 0xFFFF) {
+ // 1. P = N = T = 0.
+ P = N = T = 0;
+
+ // Get all sync components BKDG steps 3,4,6
+ P = MemNTotalSyncComponentsKB (NBPtr);
+
+ // 5. P = P + 6
+ P += 6;
+
+ // 8. P = P + CEIL(MAX(D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] +
+ // D18F2x9C_x0000_0[3:0]0[6:5]_dct[1:0][RdDqsTime] PCLKs)) + 1
+ P = P + (MaxRcvEnDly + 31) / 32 + 1;
+
+ // 9. If (NclkFreq/MemClkFreq < 2) then P = P + 4.5 Else P = P + 2.5
+ if ((NBPtr->NBClkFreq / NBPtr->DCTPtr->Timings.Speed) < 2) {
+ Px2 = P * 2 + 9;
+ } else {
+ Px2 = P * 2 + 5;
+ }
+
+ // 10. T = T + 1050 ps
+ T += 1050;
+
+ // 11. N = (P/(MemClkFreq * 2) + T) * NclkFreq; Convert from PCLKs plus time to NCLKs.
+ MemClkPeriod = 1000000 / NBPtr->DCTPtr->Timings.Speed;
+ N = ((((Px2 * MemClkPeriod + 3) / 4) + T) * NBPtr->NBClkFreq + 999999) / 1000000;
+
+ // 12. D18F2x210_dct[1:0]_nbp[3:0][MaxRdLatency] = CEIL(N) + 1
+ N = N + 1;
+ }
+
+ NBPtr->DCTPtr->Timings.MaxRdLat = (UINT16) N;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMaxRdLat: %03x\n", N);
+ MemNSetBitFieldNb (NBPtr, BFMaxLatency, N);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function set MaxRdLat after HW receiver enable training is completed
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNExitPhyAssistedTrainingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ UINT8 Dct;
+ UINT8 ChipSel;
+ MEM_TECH_BLOCK *TechPtr;
+
+ TechPtr = NBPtr->TechPtr;
+
+ // Calculate Max Latency for both channels to prepare for position training
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB ; Dct++) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+
+ // Reset DisAutoRefresh and ZqcsInterval for position training.
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ MemNSetBitFieldNb (NBPtr, BFDisAutoRefresh, 1);
+ MemNSetBitFieldNb (NBPtr, BFZqcsInterval, 0);
+ MemNSetBitFieldNb (NBPtr, BFRxDqInsDly, 0);
+ }
+
+ if (TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &ChipSel)) {
+ NBPtr->SetMaxLatency (NBPtr, TechPtr->MaxDlyForMaxRdLat);
+ }
+ }
+
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets the total of sync components for Max Read Latency calculation
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return Total in PCLKs
+ */
+UINT32
+STATIC
+MemNTotalSyncComponentsKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT32 P;
+
+ P = 0;
+
+ // 3. If (D18F2x9C_x0000_0004_dct[1:0][AddrCmdSetup] = 0 & D18F2x9C_x0000_0004_dct[1:0][CsOdt-
+ // Setup] = 0 & D18F2x9C_x0000_0004_dct[1:0][CkeSetup] = 0)
+ // then P = P + 1
+ // else P = P + 2
+ if ((MemNGetBitFieldNb (NBPtr, BFAddrTmgControl) & 0x0202020) == 0) {
+ P += 1;
+ } else {
+ P += 2;
+ }
+
+ // 4. P = P + (8 - D18F2x210_dct[1:0]_nbp[3:0][RdPtrInit])
+ P = P + (8 - (UINT16) MemNGetBitFieldNb (NBPtr, BFRdPtrInit));
+
+ // 7. P = P + (2 * (D18F2x200_dct[1:0][Tcl] - 1 clocks))
+ P = P + (2 * (MemNGetBitFieldNb (NBPtr, BFTcl) - 1));
+
+ return P;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function obtains the memory frequency in the current context
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+UINT16
+MemNGetMemClkFreqInCurrentContextKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+ UINT16 MemClkSpeed;
+
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ break;
+ }
+ }
+
+ if (MemNGetBitFieldNb (NBPtr, MemPstateBF[MemNGetBitFieldNb (NBPtr, BFNbPsSel)]) == 0) {
+ MemClkSpeed = NBPtr->DCTPtr->Timings.Speed;
+ } else {
+ MemClkSpeed = MemNGetMemClkFreqUnb (NBPtr, (UINT8) MemNGetBitFieldNb (NBPtr, BFM1MemClkFreq));
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMemclk Freq: %d\n", MemClkSpeed);
+
+ return MemClkSpeed;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function calculates and programs NB P-state dependent registers
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNProgramNbPstateDependentRegistersKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 RdPtrInit;
+ UINT8 Dct;
+ UINT8 *DimmsPerChPtr;
+ UINT8 MaxSolderedDownDimmPerCh;
+ UINT32 MemClkSpeed;
+
+ MemClkSpeed = NBPtr->GetMemClkFreqInCurrentContext (NBPtr);
+
+ // IF (((NBCOF >= DdrRate) == FALSE) THEN
+ // RdPtrInit = 0010b
+ // ELSE IF (((NBCOF >= DdrRate) == TRUE) && (DdrRate == 667 || DdrRate == 800 || DdrRate == 1600))THEN
+ // RdPtrInit = 0110b
+ // ELSE IF (((NBCOF >= DdrRate) == TRUE) && (DdrRate == 1866 || DdrRate ==2133))THEN
+ // RdPtrInit = 0101b
+ // ELSE IF (((NBCOF >= DdrRate) == TRUE) && (DdrRate == 2400))THEN
+ // RdPtrInit = 0100b
+ // ENDIF
+ if (NBPtr->NBClkFreq < (UINT32) (MemClkSpeed * 2)) {
+ RdPtrInit = 2;
+ } else {
+ RdPtrInit = (MemClkSpeed < DDR1600_FREQUENCY) ? 6 : ((MemClkSpeed < DDR2400_FREQUENCY) ? 5 : 4);
+ }
+ MemNBrdcstSetNb (NBPtr, BFRdPtrInit, RdPtrInit);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tRdPtr: %d\n", RdPtrInit);
+
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ // Set ProcOdtAdv
+ // BIOS:IF(Solder-down DRAM || SODIMM) && DdrRate <= 1333) THEN 0 ELSE 1 ENDIF.
+ MaxSolderedDownDimmPerCh = GetMaxSolderedDownDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID);
+ DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ PSO_SOLDERED_DOWN_SODIMM_TYPE,
+ NBPtr->MCTPtr->SocketId,
+ NBPtr->ChannelPtr->ChannelID,
+ 0, NULL, NULL);
+ if (((DimmsPerChPtr != NULL) || (MaxSolderedDownDimmPerCh != 0) || (NBPtr->ChannelPtr->SODimmPresent != 0)) &&
+ (NBPtr->DCTPtr->Timings.Speed <= DDR1333_FREQUENCY)) {
+ MemNSetBitFieldNb (NBPtr, BFProcOdtAdv, 0);
+ } else {
+ MemNSetBitFieldNb (NBPtr, BFProcOdtAdv, 0x4000);
+ }
+ MemNSetBitFieldNb (NBPtr, BFDataTxFifoWrDly, 0);
+ if (NBPtr->DCTPtr->Timings.Speed >= DDR1600_FREQUENCY) {
+ MemNSetBitFieldNb (NBPtr, BFReducedLoop, (2 << 13));
+ }
+ }
+ }
+
+ IDS_OPTION_HOOK (IDS_NBPS_REG_OVERRIDE, NBPtr, &NBPtr->MemPtr->StdHeader);
+ MemFInitTableDrive (NBPtr, MTAfterNbPstateChange);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This is a general purpose function that executes before DRAM init
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNBeforeDramInitKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ // c. Program DCT training specific configuration.
+ MemNConfigureDctTrainingKB (NBPtr);
+ // d. Program the remaining DCT registers not covered by an explicit sequence dependency.
+ MemNProgramNonSeqDependentRegistersKB (NBPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs the memory controller for training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNConfigureDctTrainingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ //
+ // 2.10.6.7 DCT Training Specific Configuration
+ //
+ MemNSetBitFieldNb (NBPtr, BFAddrCmdTriEn, 0);
+ MemNSetBitFieldNb (NBPtr, BFDisAutoRefresh, 1);
+ MemNSetBitFieldNb (NBPtr, BFForceAutoPchg, 0);
+ MemNSetBitFieldNb (NBPtr, BFDynPageCloseEn, 0);
+ MemNSetBitFieldNb (NBPtr, BFBankSwizzleMode, 0);
+ MemNSetBitFieldNb (NBPtr, BFDcqBypassMax, 0);
+ MemNSetBitFieldNb (NBPtr, BFPowerDownEn, 0);
+ MemNSetBitFieldNb (NBPtr, BFZqcsInterval, 0);
+ MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 0);
+ MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 0);
+ MemNSetBitFieldNb (NBPtr, BFEnRxPadStandby, 0);
+ MemNSetBitFieldNb (NBPtr, BFBankSwap, 0);
+ MemNSetBitFieldNb (NBPtr, BFODTSEn, 0);
+ MemNSetBitFieldNb (NBPtr, BFCmdThrottleMode, 0);
+ MemNSetBitFieldNb (NBPtr, BFBwCapEn, 0);
+ MemNSetBitFieldNb (NBPtr, BFDramScrub, 0);
+ MemNSetBitFieldNb (NBPtr, BFScrubReDirEn, 0);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs the remaining DCT registers not covered by
+ * an explicit sequence dependency.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNProgramNonSeqDependentRegistersKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ MemNSetBitFieldNb (NBPtr, BFDllCSRBiasTrim, 0x1000);
+
+ IEM_INSERT_CODE (IEM_BEFORE_DRAM_INIT, IemBeforeDramInitOverrideKB, (NBPtr));
+ }
+ }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs the memory controller for normal operation
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNConfigureDctNormalKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+ BOOLEAN DllShutDownEn;
+
+ DllShutDownEn = TRUE;
+ IDS_OPTION_HOOK (IDS_DLL_SHUT_DOWN, &DllShutDownEn, &(NBPtr->MemPtr->StdHeader));
+
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ //
+ // 2.10.6.7 DCT Training Specific Configuration
+ //
+ MemNSetBitFieldNb (NBPtr, BFAddrCmdTriEn, 1);
+ MemNSetBitFieldNb (NBPtr, BFDisAutoRefresh, 0);
+ if (DllShutDownEn && NBPtr->IsSupported[SetDllShutDown]) {
+ MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0);
+ }
+ MemNSetBitFieldNb (NBPtr , BFForceAutoPchg, 0);
+ MemNSetBitFieldNb (NBPtr , BFDynPageCloseEn, 0);
+ if (NBPtr->RefPtr->EnableBankSwizzle) {
+ MemNSetBitFieldNb (NBPtr, BFBankSwizzleMode, 1);
+ }
+ MemNSetBitFieldNb (NBPtr, BFDcqBypassMax, 0x01F);
+ MemNPowerDownCtlKB (NBPtr);
+ MemNSetBitFieldNb (NBPtr, BFZqcsInterval, 2);
+ MemNSetBitFieldNb (NBPtr, BFBankSwap, 1);
+ //
+ // Post Training values for BFRxMaxDurDllNoLock, BFTxMaxDurDllNoLock,
+ // and BFEnRxPadStandby are handled by Power savings code
+ //
+ // BFBwCapEn and BFODTSEn are handled by OnDimmThermal Code
+ //
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function modifies CS interleaving low address according to several conditions for KB.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *LowBit - Pointer to low bit
+ *
+ */
+
+BOOLEAN
+MemNCSIntLvLowAddrAdjKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *LowBit
+ )
+{
+ UINT8 DctSelBankSwap;
+
+ DctSelBankSwap = (UINT8) MemNGetBitFieldNb (NBPtr, BFDctSelBankSwap);
+ //
+ //D18F2x[5C:40]_dct[1:0][15:5] = BaseAddr[21:11] &&
+ //D18F2x[6C:60]_dct[1:0][15:5] = AddrMask[21:11], so *LowBit needs to be added with 2.
+ //
+ *(UINT8 *) LowBit += 2;
+
+ if (MemNGetBitFieldNb (NBPtr, BFBankSwap) == 1) {
+ if (DctSelBankSwap == 1) {
+ *(UINT8 *) LowBit = 5;
+ } else {
+ *(UINT8 *) LowBit = 6;
+ }
+ }
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function releases the NB P-state force.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ */
+BOOLEAN
+MemNReleaseNbPstateKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &NBPtr->MemPtr->StdHeader);
+
+ // 6. Restore the initial D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0] values.
+ MemNSetBitFieldNb (NBPtr, BFNbPstateCtlReg, (MemNGetBitFieldNb (NBPtr, BFNbPstateCtlReg) & 0xFFFF9FFF) | (NBPtr->NbPsCtlReg & 0x6000));
+ // 7. Restore the initial D18F5x170[NbPstateThreshold, NbPstateHi] values.
+ MemNSetBitFieldNb (NBPtr, BFNbPstateCtlReg, (MemNGetBitFieldNb (NBPtr, BFNbPstateCtlReg) & 0xFFFFF13F) | (NBPtr->NbPsCtlReg & 0x0EC0));
+ // 8. Restore the initial D18F5x170[NbPstateLo] values.
+ MemNSetBitFieldNb (NBPtr, BFNbPstateLo, (NBPtr->NbPsCtlReg >> 3) & 3);
+
+ // Clear NbPsSel to 0
+ MemNSetBitFieldNb (NBPtr, BFNbPsSel, 0);
+ // Update TSC rate
+ FamilySpecificServices->GetTscRate (FamilySpecificServices, &NBPtr->MemPtr->TscRate, &NBPtr->MemPtr->StdHeader);
+
+ if (MemNGetBitFieldNb (NBPtr, BFMemPsSel) != 0) {
+ MemNChangeMemPStateContextNb (NBPtr, 0);
+ }
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function handles multiple stage of training when multiple Mem Pstate is enabled
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ *
+ */
+
+BOOLEAN
+MemNMemPstateStageChangeKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ BOOLEAN RetVal;
+ TRN_DLY_TYPE AccessType;
+ UINT8 Dct;
+ UINT8 ChipSel;
+ UINT8 ByteLane;
+ UINT16 CsEnabled;
+ UINT16 TrnDly;
+ UINT8 Tcl;
+
+ RetVal = FALSE;
+
+ if (NBPtr->MemPstateStage == MEMORY_PSTATE_1ST_STAGE) {
+ MemNChangeMemPStateContextNb (NBPtr, 1);
+ // Load memory registers in M1 context from data saved in the heap
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nLoad Training registers for M1 with DDR667 training result\n");
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ // Save MemPstate 1 data in output data structures
+ LibAmdMemCopy (NBPtr->ChannelPtr->RcvEnDlysMemPs1, NBPtr->ChannelPtr->RcvEnDlys, (MAX_DIMMS * MAX_DELAYS) * 2, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMemCopy (NBPtr->ChannelPtr->RdDqsDlysMemPs1, NBPtr->ChannelPtr->RdDqsDlys, MAX_DIMMS * MAX_DELAYS, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMemCopy (NBPtr->ChannelPtr->WrDqsDlysMemPs1, NBPtr->ChannelPtr->WrDqsDlys, MAX_DIMMS * MAX_DELAYS, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMemCopy (NBPtr->ChannelPtr->WrDatDlysMemPs1, NBPtr->ChannelPtr->WrDatDlys, MAX_DIMMS * MAX_DELAYS, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMemCopy (NBPtr->ChannelPtr->RdDqs2dDlysMemPs1, NBPtr->ChannelPtr->RdDqs2dDlys, MAX_DIMMS * MAX_NUMBER_LANES, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMemCopy (NBPtr->ChannelPtr->RdDqsMinDlysMemPs1, NBPtr->ChannelPtr->RdDqsMinDlys, MAX_DIMMS * MAX_DELAYS, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMemCopy (NBPtr->ChannelPtr->RdDqsMaxDlysMemPs1, NBPtr->ChannelPtr->RdDqsMaxDlys, MAX_DIMMS * MAX_DELAYS, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMemCopy (NBPtr->ChannelPtr->WrDatMinDlysMemPs1, NBPtr->ChannelPtr->WrDatMinDlys, MAX_DIMMS * MAX_DELAYS, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMemCopy (NBPtr->ChannelPtr->WrDatMaxDlysMemPs1, NBPtr->ChannelPtr->WrDatMaxDlys, MAX_DIMMS * MAX_DELAYS, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMemCopy (NBPtr->ChannelPtr->FailingBitMaskMemPs1, NBPtr->ChannelPtr->FailingBitMask, MAX_CS_PER_CHANNEL * MAX_DELAYS, &(NBPtr->MemPtr->StdHeader));
+
+ CsEnabled = NBPtr->DCTPtr->Timings.CsEnabled;
+ // Set Memory Pstate 1 training value into registers
+ for (AccessType = AccessRcvEnDly; AccessType <= AccessWrDqsDly; AccessType ++) {
+ for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL_KB; ChipSel = ChipSel + NBPtr->CsPerDelay) {
+ if ((CsEnabled & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSel)) != 0) {
+ for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ TrnDly = (UINT16) GetTrainDlyFromHeapNb (NBPtr, AccessType, DIMM_BYTE_ACCESS (ChipSel / NBPtr->CsPerDelay, ByteLane));
+ NBPtr->SetTrainDly (NBPtr, AccessType, DIMM_BYTE_ACCESS (ChipSel / NBPtr->CsPerDelay, ByteLane), TrnDly);
+ }
+ }
+ }
+ }
+
+ if (NBPtr->RefPtr->EnablePowerDown) {
+ MemNSetTxpNb (NBPtr);
+ //
+ // BFPchgPDEnDelay =
+ // IF (D18F2xA8_dct[0][AggrPDEn]) THEN
+ // (D18F2x200_dct[0]_mp[1:0][Tcl] + 5 +
+ // CEIL((MAX(D18F2x9C_x0000_00[2A:10]_dct[0]_mp[1:0][DqsRcvEnGrossDelay])
+ // + 0.5) / 2)) ELSE 00h ENDIF.
+ //
+ if (MemNGetBitFieldNb (NBPtr, BFAggrPDEn) == 1) {
+ Tcl = NBPtr->DCTPtr->Timings.CasL;
+ MemNSetBitFieldNb (NBPtr, BFPchgPDEnDelay, Tcl + 5 + NBPtr->TechPtr->GetMinMaxGrossDly (NBPtr->TechPtr, AccessRcvEnDly, TRUE) / 2 + 1);
+ } else {
+ MemNSetBitFieldNb (NBPtr, BFPchgPDEnDelay, 0);
+ }
+ MemNSetBitFieldNb (NBPtr, BFAggrPDDelay, 0x20);
+ }
+ MemNSetOtherTimingKB (NBPtr);
+ // Save timing data structure for memory Pstate 1
+ LibAmdMemCopy (NBPtr->DCTPtr->TimingsMemPs1, &(NBPtr->DCTPtr->Timings), sizeof (CH_TIMING_STRUCT), &(NBPtr->MemPtr->StdHeader));
+
+ MemFInitTableDrive (NBPtr, MTAfterMemPstate1PartialTrn);
+ }
+ }
+
+ // Switch back to M0 context
+ MemNChangeMemPStateContextNb (NBPtr, 0);
+
+ // Load memory registers in M1 context from data saved in the heap
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nGoing into training stage 2. Complete training at DDR667 is done.\n");
+ NBPtr->MemPstateStage = MEMORY_PSTATE_2ND_STAGE;
+ } else if ((NBPtr->MemPstateStage == MEMORY_PSTATE_2ND_STAGE) && (NBPtr->DCTPtr->Timings.TargetSpeed == NBPtr->DCTPtr->Timings.Speed)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nGoing into training stage 3. Partial training at all frequencies is done.\n");
+ NBPtr->MemPstateStage = MEMORY_PSTATE_3RD_STAGE;
+ RetVal = TRUE;
+ } else {
+ // MemPstate is disabled. Do not go through the MemPstate handling flow.
+ RetVal = TRUE;
+ }
+
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function Sets Power Down options and enables Power Down
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * The following registers are set:
+ * BFPowerDownMode BFPrtlChPDEnhEn
+ * BFTxp BFAggrPDDelay
+ * BFTxpDll BFAggrPDEn
+ * BFPchgPDEnDelay BFPowerDownEn
+ *
+ * NOTE: Delay values must be set before turning on the associated Enable bit
+ */
+VOID
+MemNPowerDownCtlKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 PowerDownMode;
+ CONST UINT32 PwrMngm1[] = {0, 0, 0x05050403, 0x05050403, 0x06060403, 0x07070504, 0x08080504, 0x0A0A0605, 0x0B0B0706};
+ UINT8 i;
+ UINT16 Speed;
+ UINT8 Tcl;
+
+ if (NBPtr->RefPtr->EnablePowerDown) {
+ //
+ // PowerDownMode
+ //
+ PowerDownMode = (UINT8) UserOptions.CfgPowerDownMode;
+ PowerDownMode = (!NBPtr->IsSupported[ChannelPDMode]) ? PowerDownMode : 0;
+ IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(NBPtr->MemPtr->StdHeader));
+ if (PowerDownMode == 1) {
+ MemNSetBitFieldNb (NBPtr, BFPowerDownMode, 1);
+ }
+ //
+ // Txp
+ //
+ MemNSetTxpNb (NBPtr);
+ //
+ // PchgPDModeSel is set elswhere.
+ //
+ // Partial Channel Power Down
+ //
+ MemNSetBitFieldNb (NBPtr, BFPrtlChPDDynDly, 4);
+ MemNSetBitFieldNb (NBPtr, BFPrtlChPDEnhEn, 0);
+ //
+ // Aggressive PowerDown
+ //
+ MemNSetBitFieldNb (NBPtr, BFAggrPDDelay, 0x20);
+ MemNSetBitFieldNb (NBPtr, BFAggrPDEn, 1);
+ //
+ // BFPchgPDEnDelay =
+ // IF (D18F2xA8_dct[0][AggrPDEn]) THEN
+ // (D18F2x200_dct[0]_mp[1:0][Tcl] + 5 +
+ // CEIL((MAX(D18F2x9C_x0000_00[2A:10]_dct[0]_mp[1:0][DqsRcvEnGrossDelay])
+ // + 0.5) / 2)) ELSE 00h ENDIF.
+ //
+ if (MemNGetBitFieldNb (NBPtr, BFAggrPDEn) == 1) {
+ Tcl = NBPtr->DCTPtr->Timings.CasL;
+ MemNSetBitFieldNb (NBPtr, BFPchgPDEnDelay, Tcl + 5 + NBPtr->TechPtr->GetMinMaxGrossDly (NBPtr->TechPtr, AccessRcvEnDly, TRUE) / 2 + 1);
+ } else {
+ MemNSetBitFieldNb (NBPtr, BFPchgPDEnDelay, 0);
+ }
+
+ // Program DRAM Power Management 1 register
+ Speed = NBPtr->DCTPtr->Timings.Speed;
+ i = (UINT8) ((Speed < DDR800_FREQUENCY) ? ((Speed / 66) - 3) : (Speed / 133));
+ ASSERT ((i > 1) && (i < sizeof (PwrMngm1)));
+ MemNSetBitFieldNb (NBPtr, BFDramPwrMngm1Reg, PwrMngm1[i]);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * Always set upper 2 bits of CKETri bitfield
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNBeforePlatformSpecKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MemNSetBitFieldNb (NBPtr, BFCSMapCKE, 0x08040201);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function programs MaxRdLatency based on the seeded value of RxEnDly
+ * prior to DQS Receiver Enable Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ *
+ */
+
+BOOLEAN
+MemNSetMaxRdLatBasedOnSeededRxEnDlyKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ UINT8 ChipSel;
+
+ TechPtr = NBPtr->TechPtr;
+
+ if (TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &ChipSel)) {
+ NBPtr->SetMaxLatency (NBPtr, TechPtr->MaxDlyForMaxRdLat);
+ }
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function uses calculated values from DCT.Timings structure to
+ * program its registers for KB
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNProgramCycTimingsKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ CONST CTENTRY TmgAdjTab[] = {
+ // BitField, Min, Max, Bias, Ratio_x2
+ {BFTcl, 5, 14, 0, 2},
+ {BFTrcd, 2, 19, 0, 2},
+ {BFTrp, 2, 19, 0, 2},
+ {BFTrtp, 4, 10, 0, 2},
+ {BFTras, 8, 40, 0, 2},
+ {BFTrc, 10, 56, 0, 2},
+ {BFTwrDDR3, 5, 16, 0, 2},
+ {BFTrrd, 4, 9, 0, 2},
+ {BFTwtr, 4, 9, 0, 2},
+ {BFFourActWindow, 6, 42, 0, 2}
+ };
+
+ DCT_STRUCT *DCTPtr;
+ UINT8 *MiniMaxTmg;
+ UINT8 *MiniMaxTrfc;
+ UINT8 Value8;
+ UINT8 ValFAW;
+ UINT8 ValTrrd;
+ UINT8 j;
+ UINT8 Tcwl;
+ UINT8 RdOdtTrnOnDly;
+ BIT_FIELD_NAME BitField;
+ MEM_PARAMETER_STRUCT *RefPtr;
+
+ DCTPtr = NBPtr->DCTPtr;
+ RefPtr = NBPtr->RefPtr;
+
+ ValFAW = 0;
+ ValTrrd = 0;
+
+ //======================================================================
+ // Program DRAM Timing values
+ //======================================================================
+ //
+ MiniMaxTmg = &DCTPtr->Timings.CasL;
+ for (j = 0; j < GET_SIZE_OF (TmgAdjTab); j++) {
+ BitField = TmgAdjTab[j].BitField;
+
+ if (BitField == BFTrp) {
+ if (NBPtr->IsSupported[AdjustTrp]) {
+ MiniMaxTmg[j] ++;
+ if (MiniMaxTmg[j] < 5) {
+ MiniMaxTmg[j] = 5;
+ }
+ }
+ }
+
+ if (MiniMaxTmg[j] < TmgAdjTab[j].Min) {
+ MiniMaxTmg[j] = TmgAdjTab[j].Min;
+ } else if (MiniMaxTmg[j] > TmgAdjTab[j].Max) {
+ MiniMaxTmg[j] = TmgAdjTab[j].Max;
+ }
+
+ Value8 = (UINT8) MiniMaxTmg[j];
+
+ if (BitField == BFTwrDDR3) {
+ if ((Value8 > 8) && ((Value8 & 1) != 0)) {
+ Value8++;
+ }
+ } else if (BitField == BFTrrd) {
+ ValTrrd = Value8;
+ } else if (BitField == BFFourActWindow) {
+ ValFAW = Value8;
+ }
+
+ MemNSetBitFieldNb (NBPtr, BitField, Value8);
+ }
+
+ MiniMaxTrfc = &DCTPtr->Timings.Trfc0;
+ for (j = 0; j < 4; j++) {
+ if ((NBPtr->DCTPtr->Timings.DctDimmValid & (1 << j)) != 0) {
+ ASSERT (MiniMaxTrfc[j] <= 4);
+ MemNSetBitFieldNb (NBPtr, BFTrfc0 + j, MiniMaxTrfc[j]);
+ }
+ }
+
+ Tcwl = (UINT8) (DCTPtr->Timings.Speed / 133) + 2;
+ Tcwl = (Tcwl > 5) ? Tcwl : 5;
+ MemNSetBitFieldNb (NBPtr, BFTcwl, Tcwl);
+
+ if (RefPtr->DramDoubleRefreshRate) {
+ MemNSetBitFieldNb (NBPtr, BFTref, 3); // 3.9 us
+ } else {
+ MemNSetBitFieldNb (NBPtr, BFTref, 2); // 7.8 us
+ }
+
+ RdOdtTrnOnDly = (DCTPtr->Timings.CasL > Tcwl) ? (DCTPtr->Timings.CasL - Tcwl) : 0;
+ MemNSetBitFieldNb (NBPtr, BFRdOdtTrnOnDly, RdOdtTrnOnDly);
+ NBPtr->FamilySpecificHook[ProgOdtControl] (NBPtr, NULL);
+
+ //
+ // Program Tstag
+ //
+ if (NBPtr->MemPstate == 0) {
+ for (j = 0; j < 4; j++) {
+ MemNSetBitFieldNb (NBPtr, BFTstag0 + j, MAX (ValTrrd, (ValFAW + 3) / 4));
+ }
+ }
+
+ //
+ // Program Tmod
+ //
+ MemNSetBitFieldNb (NBPtr, BFTmod, (DCTPtr->Timings.Speed < DDR1866_FREQUENCY) ? 0x0C :
+ (DCTPtr->Timings.Speed > DDR1866_FREQUENCY) ? 0x10 : 0x0E);
+ //
+ // Program Tzqcs and Tzqoper
+ //
+ // Tzqcs max(64nCK, 80ns)
+ MemNSetBitFieldNb (NBPtr, BFTzqcs, MIN (6, (MAX (64, MemUnsToMemClk (NBPtr->DCTPtr->Timings.Speed, 80)) + 15) / 16));
+ // Tzqoper max(256nCK, 320ns)
+ MemNSetBitFieldNb (NBPtr, BFTzqoper, MIN (0xC, (MAX (256, MemUnsToMemClk (NBPtr->DCTPtr->Timings.Speed, 320)) + 31) / 32));
+
+ // Program power management timing
+ MemNDramPowerMngTimingNb (NBPtr);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnflowkb.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnflowkb.c
new file mode 100644
index 0000000..29aebe3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnflowkb.c
@@ -0,0 +1,129 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnflowkb.c
+ *
+ * KB initializer for MCT and DCT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/KB)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mnkb.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_KB_MNFLOWKB_FILECODE
+/* features */
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function selects appropriate Tech functions for the NB.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNTechBlockSwitchKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+
+ TechPtr = NBPtr->TechPtr;
+
+ // Specify Dimm-Byte training for Nb
+ MemTDimmByteTrainInit (TechPtr);
+
+ // Remove the following functions because they are not needed for KB
+ TechPtr->SetDramMode = (BOOLEAN (*) (MEM_TECH_BLOCK *)) memDefTrue;
+ TechPtr->SpdCalcWidth = (BOOLEAN (*) (MEM_TECH_BLOCK *)) memDefTrue;
+ TechPtr->SetDqsEccTmgs = (BOOLEAN (*) (MEM_TECH_BLOCK *)) memDefTrue;
+ TechPtr->FindMaxDlyForMaxRdLat = MemTFindMaxRcvrEnDlyRdDqsDlyByteUnb;
+ TechPtr->ResetDCTWrPtr = MemTResetRcvFifoUnb;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnidendimmkb.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnidendimmkb.c
new file mode 100644
index 0000000..aa240d0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnidendimmkb.c
@@ -0,0 +1,147 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnidendimmkb.c
+ *
+ * TN northbridge constructor for dimm identification translator.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/KB)
+ * @e \$Revision: 84482 $ @e \$Date: 2012-12-16 22:48:10 -0600 (Sun, 16 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"
+#include "mnkb.h"
+#include "Ids.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_KB_MNIDENDIMMKB_FILECODE
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNIdentifyDimmConstructorKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN UINT8 NodeID
+ );
+
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes the northbridge block for dimm identification translator
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT
+ * @param[in,out] NodeID - ID of current node to construct
+ * @return TRUE - This is the correct constructor for the targeted node.
+ * @return FALSE - This isn't the correct constructor for the targeted node.
+ */
+
+BOOLEAN
+MemNIdentifyDimmConstructorKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN UINT8 NodeID
+ )
+{
+ //
+ // Determine if this is the expected NB Type
+ //
+ GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+ if (!MemNIsIdSupportedKB (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+ return FALSE;
+ }
+
+ NBPtr->NodeCount = 1;
+ NBPtr->DctCount = MAX_DCTS_PER_NODE_KB;
+ NBPtr->CsRegMsk = 0x7FF8FFE0;
+ NBPtr->MemPtr = MemPtr;
+ NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+ NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+ NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+ NBPtr->Ganged = FALSE;
+ MemNInitNBRegTableKB (NBPtr, NBPtr->NBRegTable);
+ NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldKB;
+ NBPtr->GetBitField = MemNGetBitFieldNb;
+ NBPtr->SetBitField = MemNSetBitFieldNb;
+ NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelNb;
+ NBPtr->FamilySpecificHook[DCTSelectSwitch] = MemNDctCfgSelectUnb;
+ NBPtr->FamilySpecificHook[FixupSysAddr] = MemNDefaultFamilyHookNb;
+
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnkb.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnkb.c
new file mode 100644
index 0000000..dbc2de3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnkb.c
@@ -0,0 +1,628 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnkb.c
+ *
+ * Common Northbridge functions for KB
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/KB)
+ * @e \$Revision: 87494 $ @e \$Date: 2013-02-04 12:06:47 -0600 (Mon, 04 Feb 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnkb.h"
+#include "mu.h"
+#include "S3.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "GeneralServices.h"
+#include "IdsF16KbAllService.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_KB_MNKB_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemNRegAccessFenceKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+/**
+ * Array for frequency change related parameters.
+ */
+CONST MEM_FREQ_CHANGE_PARAM FreqChangeParamKB = {0x0190, 0, 0, 0, 0, 0, 0, 0};
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+extern PSO_ENTRY DefaultPlatformMemoryConfiguration[];
+extern OPTION_MEM_FEATURE_NB* memNTrainFlowControl[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes the northbridge block
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT
+ * @param[in] *FeatPtr - Pointer to the MEM_FEAT_BLOCK_NB
+ * @param[in] *SharedPtr - Pointer to the MEM_SHARED_DATA
+ * @param[in] NodeID - UINT8 indicating node ID of the NB object.
+ *
+ * @return Boolean indicating that this is the correct memory
+ * controller type for the node number that was passed in.
+ */
+
+BOOLEAN
+MemConstructNBBlockKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN MEM_FEAT_BLOCK_NB *FeatPtr,
+ IN MEM_SHARED_DATA *SharedPtr,
+ IN UINT8 NodeID
+ )
+{
+ UINT8 Dct;
+ UINT8 Channel;
+ UINT8 SpdSocketIndex;
+ UINT8 SpdChannelIndex;
+ DIE_STRUCT *MCTPtr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ //
+ // Determine if this is the expected NB Type
+ //
+ GetLogicalIdOfSocket (MemPtr->DiesPerSystem->SocketId, &(MemPtr->DiesPerSystem->LogicalCpuid), &(MemPtr->StdHeader));
+ if (!MemNIsIdSupportedKB (&(MemPtr->DiesPerSystem->LogicalCpuid))) {
+ return FALSE;
+ }
+
+ NBPtr->MemPtr = MemPtr;
+ NBPtr->RefPtr = MemPtr->ParameterListPtr;
+ NBPtr->SharedPtr = SharedPtr;
+
+ MCTPtr = MemPtr->DiesPerSystem;
+ NBPtr->MCTPtr = MCTPtr;
+ NBPtr->MCTPtr->NodeId = NodeID;
+ NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue;
+ NBPtr->VarMtrrHiMsk = GetVarMtrrHiMsk (&(MemPtr->DiesPerSystem->LogicalCpuid), &(MemPtr->StdHeader));
+
+ //
+ // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+ //
+ AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_KB * (
+ sizeof (DCT_STRUCT) + (
+ MAX_CHANNELS_PER_DCT_KB * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK) + sizeof (CH_TIMING_STRUCT))
+ )
+ );
+ AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0);
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader);
+ SetMemError (AGESA_FATAL, MCTPtr);
+ ASSERT(FALSE); // Could not allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs
+ return FALSE;
+ }
+
+ MCTPtr->DctCount = MAX_DCTS_PER_NODE_KB;
+ MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_KB * sizeof (DCT_STRUCT);
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ MCTPtr->DctData[Dct].Dct = Dct;
+ MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_KB;
+ MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr;
+ MCTPtr->DctData[Dct].ChData[0].Dct = Dct;
+ AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_KB * sizeof (CH_DEF_STRUCT);
+ MCTPtr->DctData[Dct].TimingsMemPs1 = (CH_TIMING_STRUCT *) AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_KB * sizeof (CH_TIMING_STRUCT);
+ }
+ NBPtr->PSBlock = (MEM_PS_BLOCK *) AllocHeapParams.BufferPtr;
+
+ //
+ // Initialize Socket List
+ //
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ MemPtr->SocketList[MCTPtr->SocketId].ChannelPtr[(MCTPtr->DieId * 2) + Dct] = &(MCTPtr->DctData[Dct].ChData[0]);
+ MemPtr->SocketList[MCTPtr->SocketId].TimingsPtr[(MCTPtr->DieId * 2) + Dct] = &(MCTPtr->DctData[Dct].Timings);
+ MCTPtr->DctData[Dct].ChData[0].ChannelID = (MCTPtr->DieId * 2) + Dct;
+ }
+
+ MemNInitNBDataKB (NBPtr);
+
+ FeatPtr->InitCPG (NBPtr);
+ FeatPtr->InitHwRxEn (NBPtr);
+ FeatPtr->InitEarlySampleSupport (NBPtr);
+ FeatPtr->InitRdWr2DTraining (NBPtr);
+
+ NBPtr->FeatPtr = FeatPtr;
+
+ //
+ // Calculate SPD Offsets per channel and assign pointers to the data. At this point, we calculate the Node-Dct-Channel
+ // centric offsets and store the pointers to the first DIMM of each channel in the Channel Definition struct for that
+ // channel. This pointer is then used later to calculate the offsets to be used for each logical dimm once the
+ // dimm types(QR or not) are known. This is done in the Technology block constructor.
+ //
+ // Calculate the SpdSocketIndex separately from the SpdChannelIndex.
+ // This will facilitate modifications due to some processors that might
+ // map the DCT-CHANNEL differently.
+ //
+ SpdSocketIndex = GetSpdSocketIndex (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, &MemPtr->StdHeader);
+ //
+ // Traverse the Dct/Channel structures
+ //
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_KB; Channel++) {
+ //
+ // Calculate the number of Dimms on this channel using the
+ // die/dct/channel to Socket/channel conversion.
+ //
+ SpdChannelIndex = GetSpdChannelIndex (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ NBPtr->MCTPtr->SocketId,
+ MemNGetSocketRelativeChannelNb (NBPtr, Dct, Channel),
+ &MemPtr->StdHeader);
+ NBPtr->MCTPtr->DctData[Dct].ChData[Channel].SpdPtr = &(MemPtr->SpdDataStructure[SpdSocketIndex + SpdChannelIndex]);
+ }
+ }
+
+ //
+ // Initialize Dct and DctCfgSel bit
+ //
+ MemNSetBitFieldNb (NBPtr, BFDctCfgSel, 0);
+ MemNSwitchDCTNb (NBPtr, 0);
+
+ if (MemNGetBitFieldNb (NBPtr, BFMemPstateDis) == 1) {
+ // MemPstate is disabled
+ NBPtr->MemPstateStage = 0;
+ }
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initializes member functions and variables of NB block.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitNBDataKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ NBPtr->DctCachePtr = NBPtr->DctCache;
+ NBPtr->PsPtr = NBPtr->PSBlock;
+
+ MemNInitNBRegTableKB (NBPtr, NBPtr->NBRegTable);
+ NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+ NBPtr->Dct = 0;
+ NBPtr->Channel = 0;
+ NBPtr->DctCount = MAX_DCTS_PER_NODE_KB;
+ NBPtr->ChannelCount = MAX_CHANNELS_PER_DCT_KB;
+ NBPtr->NodeCount = MAX_NODES_SUPPORTED_KB;
+ NBPtr->Ganged = FALSE;
+ NBPtr->PosTrnPattern = POS_PATTERN_256B;
+ NBPtr->MemCleared = FALSE;
+ NBPtr->StartupSpeed = DDR667_FREQUENCY;
+ NBPtr->RcvrEnDlyLimit = 0x1FF;
+ NBPtr->DefDctSelIntLvAddr = 4;
+ NBPtr->NbFreqChgState = 0;
+ NBPtr->FreqChangeParam = (MEM_FREQ_CHANGE_PARAM *) &FreqChangeParamKB;
+ NBPtr->MaxRxEnSeedTotal = 0x1FF;
+ NBPtr->MinRxEnSeedGross = 0;
+ NBPtr->CsRegMsk = 0x7FF8FFE0;
+ NBPtr->RdDqsDlyRetrnStat = RDDQSDLY_RTN_NEEDED;
+ NBPtr->MemPstate = MEMORY_PSTATE0;
+ NBPtr->MemPstateStage = MEMORY_PSTATE_1ST_STAGE;
+ NBPtr->CsPerChannel = MAX_CS_PER_CHANNEL_KB;
+ NBPtr->CsPerDelay = 1;
+ NBPtr->RdDqsDlyForMaxRdLat = 0x1F;
+ NBPtr->TotalMaxVrefRange = 0x20;
+ NBPtr->TotalRdDQSDlyRange = 0x40;
+ NBPtr->MaxSeedCount = MAX_2D_DQS_SEED_COUNT;
+ NBPtr->TotalBitTimes2DRdTraining = TOTAL_BIT_TIMES_2D_RD_TRAINING_KB;
+ NBPtr->TotalBitTimes2DWrTraining = TOTAL_BIT_TIMES_2D_WR_TRAINING_KB;
+ NBPtr->PhaseLaneMask = 0x3FFFF;
+ NBPtr->MaxDiamondStep = 3;
+ NBPtr->DiamondWidthRd = 9;
+ NBPtr->DiamondWidthWr = 9;
+ NBPtr->RdRolloverMultiple = 8;
+
+
+ LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader);
+ MemNInitNBDataNb (NBPtr);
+
+ NBPtr->SetMaxLatency = MemNSetMaxLatencyKB;
+ NBPtr->getMaxLatParams = MemNGetMaxLatParamsKB;
+ NBPtr->InitializeMCT = MemNInitializeMctKB;
+ NBPtr->FinalizeMCT = MemNFinalizeMctKB;
+ NBPtr->SendMrsCmd = MemNSendMrsCmdUnb;
+ NBPtr->sendZQCmd = MemNSendZQCmdNb;
+ NBPtr->WritePattern = MemNWritePatternKB;
+ NBPtr->ReadPattern = MemNReadPatternKB;
+ NBPtr->GenHwRcvEnReads = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+ NBPtr->CompareTestPattern = MemNCompareTestPatternNb;
+ NBPtr->InsDlyCompareTestPattern = MemNInsDlyCompareTestPatternNb;
+ NBPtr->StitchMemory = MemNStitchMemoryNb;
+ NBPtr->AutoConfig = MemNAutoConfigKB;
+ NBPtr->PlatformSpec = MemNPlatformSpecUnb;
+ NBPtr->InitMCT = MemNInitMCTNb;
+ NBPtr->DisableDCT = MemNDisableDCTUnb;
+ NBPtr->StartupDCT = MemNStartupDCTUnb;
+ NBPtr->SyncTargetSpeed = MemNSyncTargetSpeedNb;
+ NBPtr->ChangeFrequency = MemNChangeFrequencyUnb;
+ NBPtr->RampUpFrequency = MemNRampUpFrequencyUnb;
+ NBPtr->ChangeNbFrequency = MemNChangeNbFrequencyUnb;
+ NBPtr->ChangeNbFrequencyWrap = MemNChangeNbFrequencyWrapUnb;
+ NBPtr->GetMemClkFreqInCurrentContext = MemNGetMemClkFreqInCurrentContextKB;
+ NBPtr->ProgramNbPsDependentRegs = MemNProgramNbPstateDependentRegistersKB;
+ NBPtr->ProgramCycTimings = MemNProgramCycTimingsKB;
+ NBPtr->SyncDctsReady = (BOOLEAN (*) (MEM_NB_BLOCK *)) memDefTrue;
+ NBPtr->HtMemMapInit = MemNHtMemMapInitKB;
+ NBPtr->SyncAddrMapToAllNodes = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+ NBPtr->CpuMemTyping = MemNCPUMemTypingNb;
+ NBPtr->BeforeDqsTraining = MemNBeforeDQSTrainingKB;
+ NBPtr->AfterDqsTraining = MemNAfterDQSTrainingKB;
+ NBPtr->OtherTiming = MemNOtherTimingKB;
+ NBPtr->UMAMemTyping = MemNUMAMemTypingNb;
+ NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelNb;
+ NBPtr->TechBlockSwitch = MemNTechBlockSwitchKB;
+ NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldKB;
+ NBPtr->SetEccSymbolSize = MemNSetEccSymbolSizeNb;
+ NBPtr->TrainingFlow = MemNTrainingFlowUnb;
+ NBPtr->PollBitField = MemNPollBitFieldNb;
+ NBPtr->BrdcstCheck = MemNBrdcstCheckNb;
+ NBPtr->BrdcstSet = MemNBrdcstSetNb;
+ NBPtr->GetTrainDly = MemNGetTrainDlyNb;
+ NBPtr->SetTrainDly = MemNSetTrainDlyNb;
+ NBPtr->PhyFenceTraining = MemNPhyFenceTrainingUnb;
+ NBPtr->GetSysAddr = MemNGetMCTSysAddrNb;
+ NBPtr->RankEnabled = MemNRankEnabledNb;
+ NBPtr->MemNBeforeDramInitNb = MemNBeforeDramInitKB;
+ NBPtr->MemNcmnGetSetTrainDly = MemNcmnGetSetTrainDlyUnb;
+ NBPtr->MemPPhyFenceTrainingNb = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+ NBPtr->MemNInitPhyComp = MemNInitPhyCompKB;
+ NBPtr->MemNBeforePlatformSpecNb = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+ NBPtr->MemNPlatformSpecificFormFactorInitNb = MemNPlatformSpecificFormFactorInitTblDrvNb;
+ NBPtr->MemNPFenceAdjustNb = MemNPFenceAdjustKB;
+ NBPtr->GetTrainDlyParms = MemNGetTrainDlyParmsUnb;
+ NBPtr->TrainingPatternInit = MemNTrainingPatternInitNb;
+ NBPtr->TrainingPatternFinalize = MemNTrainingPatternFinalizeNb;
+ NBPtr->GetApproximateWriteDatDelay = MemNGetApproximateWriteDatDelayNb;
+ NBPtr->FlushPattern = MemNFlushPatternNb;
+ NBPtr->MinDataEyeWidth = MemNMinDataEyeWidthNb;
+ NBPtr->MemNCapSpeedBatteryLife = MemNCapSpeedBatteryLifeKB;
+ NBPtr->GetUmaSize = MemNGetUmaSizeKB;
+ NBPtr->GetMemClkFreqId = MemNGetMemClkFreqIdUnb;
+ NBPtr->EnableSwapIntlvRgn = (VOID (*) (MEM_NB_BLOCK *, UINT32, UINT32)) memDefRet;
+ NBPtr->WaitXMemClks = MemNWaitXMemClksNb;
+ NBPtr->MemNGetDramTerm = MemNGetDramTermTblDrvNb;
+ NBPtr->MemNGetDynDramTerm = MemNGetDynDramTermTblDrvNb;
+ NBPtr->MemNGetMR0CL = MemNGetMR0CLTblDrvNb;
+ NBPtr->MemNGetMR0WR = MemNGetMR0WRTblDrvNb;
+ NBPtr->MemNSaveMR0 = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet;
+ NBPtr->MemNGetMR2CWL = MemNGetMR2CWLUnb;
+ NBPtr->AllocateC6Storage = MemNAllocateC6StorageKB;
+ NBPtr->MemNBeforePlatformSpecNb = MemNBeforePlatformSpecKB;
+ NBPtr->AgressorContinuousWrites = MemNAgressorContinuousWritesUnb;
+ NBPtr->GetPrbs2dRdDqsSeed = (UINT32 (*) (struct _MEM_NB_BLOCK *NBPtr , UINT8 SeedCount)) memDefRet;
+ NBPtr->InPhaseCompareRdDqs2DPattern = (UINT32 (*) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount)) memDefRet;
+ NBPtr->Phase180CompareRdDqs2DPattern = (UINT32 (*) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount)) memDefRet;
+ NBPtr->InitializeRdDqs2dVictimContinuousWrites = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+ NBPtr->FinalizeRdDqs2dVictimContinuousWrites = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+ NBPtr->InitializeRdDqs2dVictimChipSelContinuousWrites = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+ NBPtr->StartRdDqs2dVictimContinuousWrites = (VOID (*) (struct _MEM_NB_BLOCK *NBPtr , UINT8 SeedCount)) memDefRet;
+ NBPtr->MemN2DRdDQSDataCollection = (BOOLEAN (*) (MEM_NB_BLOCK *)) memDefRet;
+ NBPtr->MemNGetMemoryWidth = MemNGetMemoryWidthUnb;
+ NBPtr->MemNDisableScrubber = MemNDisableScrubberKB;
+ NBPtr->MemNRestoreScrubber = MemNRestoreScrubberKB;
+ NBPtr->MemNSetEccExclusionRange = MemNSetEccExclusionRangeUnb;
+
+ NBPtr->IsSupported[SetDllShutDown] = TRUE;
+ NBPtr->IsSupported[CheckEccDLLPwrDnConfig] = TRUE;
+ NBPtr->IsSupported[CheckMaxDramRate] = TRUE;
+ NBPtr->IsSupported[CheckPhyFenceTraining] = TRUE;
+ NBPtr->IsSupported[CheckSendAllMRCmds] = TRUE;
+ NBPtr->IsSupported[CheckFindPSOverideWithSocket] = TRUE;
+ NBPtr->IsSupported[FenceTrnBeforeDramInit] = TRUE;
+ NBPtr->IsSupported[UnifiedNbFence] = TRUE;
+ NBPtr->IsSupported[CheckODTControls] = TRUE;
+ NBPtr->IsSupported[EccByteTraining] = TRUE;
+ NBPtr->IsSupported[CheckDramTerm] = TRUE;
+ NBPtr->IsSupported[CheckDramTermDyn] = TRUE;
+ NBPtr->IsSupported[CheckQoff] = TRUE;
+ NBPtr->IsSupported[CheckDrvImpCtrl] = TRUE;
+ NBPtr->IsSupported[CheckSetSameDctODTsEn] = TRUE;
+ NBPtr->IsSupported[WLSeedAdjust] = TRUE;
+ NBPtr->IsSupported[WLNegativeDelay] = TRUE;
+ NBPtr->IsSupported[TwoStageDramInit] = TRUE;
+ NBPtr->IsSupported[ForceEnMemHoleRemapping] = TRUE;
+ NBPtr->IsSupported[ProgramCsrComparator] = TRUE;
+ NBPtr->IsSupported[AdjustTrp] = TRUE; // erratum 638
+ NBPtr->IsSupported[ForcePhyToM0] = TRUE;
+ NBPtr->IsSupported[SwitchRdDqsDlyForMaxRdLatency] = TRUE;
+ NBPtr->IsSupported[OptimizedPatternWrite2D] = TRUE;
+
+ NBPtr->FamilySpecificHook[ExitPhyAssistedTraining] = MemNExitPhyAssistedTrainingKB;
+ NBPtr->FamilySpecificHook[DCTSelectSwitch] = MemNDctCfgSelectUnb;
+ NBPtr->FamilySpecificHook[AfterSaveRestore] = MemNAfterSaveRestoreUnb;
+ NBPtr->FamilySpecificHook[OverrideRcvEnSeed] = MemNOverrideRcvEnSeedKB;
+ NBPtr->FamilySpecificHook[OverrideWLSeed] = MemNOverrideWLSeedKB;
+ NBPtr->FamilySpecificHook[CalcWrDqDqsEarly] = MemNCalcWrDqDqsEarlyKB;
+ NBPtr->FamilySpecificHook[AdjustRdDqsDlyOffset] = MemNAdjustRdDqsDlyOffsetUnb;
+ NBPtr->FamilySpecificHook[GetDdrMaxRate] = MemNGetMaxDdrRateUnb;
+ NBPtr->FamilySpecificHook[AfterMemClkFreqVal] = MemNAdjustPllLockTimeKB;
+ NBPtr->FamilySpecificHook[AdjustCSIntLvLowAddr] = MemNCSIntLvLowAddrAdjKB;
+ NBPtr->FamilySpecificHook[ReleaseNbPstate] = MemNReleaseNbPstateKB;
+ NBPtr->FamilySpecificHook[InitializeRxEnSeedlessTraining] = MemNInitializeRxEnSeedlessTrainingUnb;
+ NBPtr->FamilySpecificHook[TrackRxEnSeedlessRdWrNoWindBLError] = MemNTrackRxEnSeedlessRdWrNoWindBLErrorUnb;
+ NBPtr->FamilySpecificHook[TrackRxEnSeedlessRdWrSmallWindBLError] = MemNTrackRxEnSeedlessRdWrSmallWindBLErrorUnb;
+ NBPtr->FamilySpecificHook[InitialzeRxEnSeedlessByteLaneError] = MemNInitialzeRxEnSeedlessByteLaneErrorUnb;
+ NBPtr->FamilySpecificHook[MemPstateStageChange] = MemNMemPstateStageChangeKB;
+ NBPtr->FamilySpecificHook[ProgramFence2RxDll] = MemNProgramFence2RxDllKB;
+ NBPtr->FamilySpecificHook[RdDqsDlyRestartChk] = MemNRdDqsDlyRestartChkKB;
+ NBPtr->FamilySpecificHook[BeforeWrDatTrn] = MemNHookBfWrDatTrnKB;
+ NBPtr->FamilySpecificHook[RegAccessFence] = MemNRegAccessFenceKB;
+ NBPtr->FamilySpecificHook[AdjustWrDqsBeforeSeedScaling] = MemNAdjustWrDqsBeforeSeedScalingUnb;
+ NBPtr->FamilySpecificHook[WLMR1] = MemNWLMR1KB;
+ NBPtr->FamilySpecificHook[Adjust2DPhaseMaskBasedOnEcc] = MemNAdjust2DPhaseMaskBasedOnEccUnb;
+ NBPtr->FamilySpecificHook[ProgramPOdtOff] = MemNProgramPOdtOffKB;
+ NBPtr->FamilySpecificHook[RelocatePscTblEntryByMotherBoardLayer] = memNRelocatePscTableEntryByMotherBoardLayerKB;
+ NBPtr->FamilySpecificHook[AdjustHwRcvEnSeedGross] = MemNAdjustHwRcvEnSeedGrossKB;
+ NBPtr->FamilySpecificHook[ForceEccSymbolSize] = MemNForceEccSymbolSizeKB;
+ NBPtr->FamilySpecificHook[AdjustRdDqsDlyForMaxRdLat] = MemNAdjustRdDqsDlyForMaxRdLatUnb;
+ NBPtr->FamilySpecificHook[SetMaxRdLatBasedOnSeededRxEnDly] = MemNSetMaxRdLatBasedOnSeededRxEnDlyKB;
+ NBPtr->FamilySpecificHook[DisableMemHoleMapping] = MemNDisableMemHoleMappingKB;
+ NBPtr->FamilySpecificHook[RestoreMemHoleMapping] = MemNRestoreMemHoleMappingKB;
+ NBPtr->FamilySpecificHook[PhyInitVref] = MemNPhyInitVrefKB;
+
+ IEM_INSERT_CODE (IEM_NBBLOCK_INIT, IemInitNBDataOverrideKB, (NBPtr));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes the default values in the MEM_DATA_STRUCT
+ *
+ * NOTE: This function must first verify the NB Family.
+ *
+ * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+VOID
+MemNInitDefaultsKB (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ )
+{
+ MEM_PARAMETER_STRUCT *RefPtr;
+ CPU_LOGICAL_ID LogicalCpuid;
+ ASSERT (MemPtr != NULL);
+ //
+ // Determine if this is the expected NB Type
+ //
+ GetLogicalIdOfCurrentCore (&LogicalCpuid, &(MemPtr->StdHeader));
+ if (MemNIsIdSupportedKB (&LogicalCpuid)) {
+ RefPtr = MemPtr->ParameterListPtr;
+ RefPtr->EnableNodeIntlv = FALSE;
+ RefPtr->EnableChannelIntlv = FALSE;
+ RefPtr->EnableParity = FALSE;
+ RefPtr->EnableOnLineSpareCtl = FALSE;
+ }
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ * This function writes training pattern
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Pattern[] - Pattern to write
+ * @param[in] Address - System Address [47:16]
+ * @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNWritePatternKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Address,
+ IN UINT8 Pattern[],
+ IN UINT16 ClCount
+ )
+{
+ Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+ MemUWriteCachelines (Address, Pattern, ClCount);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ * This function reads training pattern
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Buffer[] - Buffer to fill
+ * @param[in] Address - System Address [47:16]
+ * @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNReadPatternKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ )
+{
+ Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr);
+ MemUReadCachelines (Buffer, Address, ClCount);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initiates DQS training for KB
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+memNEnableTrainSequenceKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ BOOLEAN Retval;
+ Retval = TRUE;
+ if (!MemNIsIdSupportedKB (&(NBPtr->MemPtr->DiesPerSystem[NBPtr->MCTPtr->NodeId].LogicalCpuid))) {
+ Retval = FALSE;
+ }
+ return Retval;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function obtains PSC table entry pointer by mother board layer design for KB
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *TblEntryPtr - Pointer to the PSC table entry
+ *
+ */
+
+BOOLEAN
+memNRelocatePscTableEntryByMotherBoardLayerKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *TblEntryPtr
+ )
+{
+ PSC_TBL_ENTRY **TblEntry;
+ UINT8 *SwitchCountPtr;
+ UINT8 i;
+
+ SwitchCountPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MOTHER_BOARD_LAYERS, 0, 0, 0, NULL, NULL);
+ if (SwitchCountPtr != NULL) {
+ //
+ // Relocate the table entry pointer to the set for the current mother board design
+ //
+ TblEntry = *(PSC_TBL_ENTRY ***) TblEntryPtr;
+ for (i = 0; i < *SwitchCountPtr; i ++) {
+ while (*TblEntry != NULL) {
+ TblEntry ++;
+ }
+ TblEntry ++;
+ }
+ *(PSC_TBL_ENTRY ***) TblEntryPtr = TblEntry;
+ }
+
+ return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function makes sure that previous phy register writes are done.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ *
+ */
+
+BOOLEAN
+STATIC
+MemNRegAccessFenceKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ // If subsequent writes to this array are scheduled, such as when writing several byte lanes during dram
+ // training, then it is recommended to issue a dummy register read to ensure the last write.
+ NBPtr->GetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (0, 0));
+
+ return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnkb.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnkb.h
new file mode 100644
index 0000000..628df0c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnkb.h
@@ -0,0 +1,410 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnkb.h
+ *
+ * Northbridge KB
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/KB)
+ * @e \$Revision: 87494 $ @e \$Date: 2013-02-04 12:06:47 -0600 (Mon, 04 Feb 2013) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MNKB_H_
+#define _MNKB_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_DCTS_PER_NODE_KB 1
+#define MAX_CHANNELS_PER_DCT_KB 1
+#define MAX_NODES_SUPPORTED_KB 1
+#define MAX_CS_PER_CHANNEL_KB 4
+
+#define DEFAULT_WR_ODT_KB 6
+#define DEFAULT_RD_ODT_KB 6
+#define DEFAULT_RD_ODT_TRNONDLY_KB 0
+
+#define TOTAL_BIT_TIMES_2D_RD_TRAINING_KB (64 * 1024)
+#define TOTAL_BIT_TIMES_2D_WR_TRAINING_KB (64 * 1024)
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemConstructNBBlockKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN MEM_FEAT_BLOCK_NB *FeatPtr,
+ IN MEM_SHARED_DATA *SharedPtr,
+ IN UINT8 NodeID
+ );
+
+VOID
+MemNInitNBDataKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNInitDefaultsKB (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+BOOLEAN
+MemNInitializeMctKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNAutoConfigKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNOtherTimingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNInitPhyCompKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNWritePatternKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Address,
+ IN UINT8 Pattern[],
+ IN UINT16 ClCount
+ );
+
+VOID
+MemNReadPatternKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ );
+
+VOID
+MemNInitNBRegTableKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT TSEFO NBRegTable[]
+ );
+
+BOOLEAN
+MemNIsIdSupportedKB (
+ IN CPU_LOGICAL_ID *LogicalIdPtr
+ );
+
+UINT32
+MemNCmnGetSetFieldKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 IsSet,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field
+ );
+
+BOOLEAN
+memNEnableTrainSequenceKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNTechBlockSwitchKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNAfterDQSTrainingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNCapSpeedBatteryLifeKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNGetMaxLatParamsKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT16 MaxRcvEnDly,
+ IN OUT UINT16 *MinDlyPtr,
+ IN OUT UINT16 *MaxDlyPtr,
+ IN OUT UINT16 *DlyBiasPtr
+ );
+
+VOID
+MemNSetMaxLatencyKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT16 MaxRcvEnDly
+ );
+
+BOOLEAN
+MemNExitPhyAssistedTrainingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemNOverrideRcvEnSeedKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *SeedPtr
+ );
+
+VOID
+MemNBeforeDQSTrainingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT16
+MemNGetMemClkFreqInCurrentContextKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNProgramNbPstateDependentRegistersKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNAdjustPllLockTimeKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *PllLockTime
+ );
+
+BOOLEAN
+MemNOverrideWLSeedKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *SeedPtr
+ );
+
+BOOLEAN
+MemNFinalizeMctKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNHtMemMapInitKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT32
+MemNGetUmaSizeKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNBeforeDramInitKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNCSIntLvLowAddrAdjKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *LowBit
+ );
+
+VOID
+MemNAllocateC6StorageKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNPFenceAdjustKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT INT16 *Value16
+ );
+
+BOOLEAN
+MemNReleaseNbPstateKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemNMemPstateStageChangeKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemNProgramFence2RxDllKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Fence2Data
+ );
+
+BOOLEAN
+MemNRdDqsDlyRestartChkKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Center
+ );
+
+BOOLEAN
+MemNHookBfWrDatTrnKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *ChipSel
+ );
+
+VOID
+MemNSetOtherTimingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNPowerDownCtlKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNBeforePlatformSpecKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNWLMR1KB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Value
+ );
+
+BOOLEAN
+MemNProgramPOdtOffKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Value
+ );
+
+BOOLEAN
+memNRelocatePscTableEntryByMotherBoardLayerKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *TblEntryPtr
+ );
+
+BOOLEAN
+MemNAdjustHwRcvEnSeedGrossKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Value
+ );
+
+BOOLEAN
+MemNPowerSavingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNForceEccSymbolSizeKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Size
+ );
+
+BOOLEAN
+MemNCalcWrDqDqsEarlyKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+VOID
+MemNConfigureDctTrainingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNProgramNonSeqDependentRegistersKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNConfigureDctNormalKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNSetMaxRdLatBasedOnSeededRxEnDlyKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+VOID
+MemNPhyPowerSavingMPstateKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNDisableScrubberKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNRestoreScrubberKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNProgramCycTimingsKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNDisableMemHoleMappingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemNRestoreMemHoleMappingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemNPhyInitVrefKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+#endif /* _MNKB_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnmctkb.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnmctkb.c
new file mode 100644
index 0000000..e1ffb28
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnmctkb.c
@@ -0,0 +1,551 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnmctkb.c
+ *
+ * Northbridge KB MCT supporting functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/KB)
+ * @e \$Revision: 87696 $ @e \$Date: 2013-02-07 12:35:03 -0600 (Thu, 07 Feb 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbHandleLib.h"
+#include "GnbRegistersKB.h"
+#include "GnbRegisterAccKB.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"
+#include "mnkb.h"
+#include "cpuFeatures.h"
+#include "Filecode.h"
+#include "mftds.h"
+#include "mu.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_KB_MNMCTKB_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define _16MB_RJ16 0x0100
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function force memory Pstate to M0
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNInitializeMctKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MemNSetBitFieldNb (NBPtr, BFMemPsSel, 0);
+ MemNSetBitFieldNb (NBPtr, BFEnSplitMctDatBuffers, 1);
+
+ MemNBrdcstSetUnConditionalNb (NBPtr, BFPStateToAccess, 0);
+
+ MemNForcePhyToM0Unb (NBPtr);
+
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets final values for specific registers.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNFinalizeMctKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_DATA_STRUCT *MemPtr;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ DRAM_PREFETCH_MODE DramPrefetchMode;
+ UINT16 Speed;
+ UINT32 Value32;
+ UINT8 DcqBwThrotWm1;
+ UINT8 DcqBwThrotWm2;
+
+ MemPtr = NBPtr->MemPtr;
+ RefPtr = MemPtr->ParameterListPtr;
+ DramPrefetchMode = MemPtr->PlatFormConfig->PlatformProfile.AdvancedPerformanceProfile.DramPrefetchMode;
+ Speed = NBPtr->DCTPtr->Timings.Speed;
+
+ //
+ // F2x11C
+ //
+ MemNSetBitFieldNb (NBPtr, BFMctCfgHiReg, 0x0CE00F30);
+ if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_IO || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+ MemNSetBitFieldNb (NBPtr, BFPrefIoDis, 1);
+ }
+
+ if (DramPrefetchMode == DISABLE_DRAM_PREFETCH_FOR_CPU || DramPrefetchMode == DISABLE_DRAM_PREFETCHER) {
+ MemNSetBitFieldNb (NBPtr, BFPrefCpuDis, 1);
+ }
+
+
+ if (Speed == DDR667_FREQUENCY) {
+ DcqBwThrotWm1 = 3;
+ DcqBwThrotWm2 = 4;
+ } else if (Speed == DDR800_FREQUENCY) {
+ DcqBwThrotWm1 = 3;
+ DcqBwThrotWm2 = 5;
+ } else if (Speed == DDR1066_FREQUENCY) {
+ DcqBwThrotWm1 = 4;
+ DcqBwThrotWm2 = 6;
+ } else if (Speed == DDR1333_FREQUENCY) {
+ DcqBwThrotWm1 = 5;
+ DcqBwThrotWm2 = 8;
+ } else if (Speed == DDR1600_FREQUENCY) {
+ DcqBwThrotWm1 = 6;
+ DcqBwThrotWm2 = 9;
+ } else if (Speed == DDR1866_FREQUENCY) {
+ DcqBwThrotWm1 = 7;
+ DcqBwThrotWm2 = 10;
+ } else {
+ DcqBwThrotWm1 = 8;
+ DcqBwThrotWm2 = 12;
+ }
+ //
+ // F2x1B0
+ //
+ Value32 = MemNGetBitFieldNb (NBPtr, BFExtMctCfgLoReg);
+ Value32 &= 0x003FE8C0;
+ Value32 |= 0x0FC01001;
+ MemNSetBitFieldNb (NBPtr, BFExtMctCfgLoReg, Value32);
+
+ //
+ // F2x1B4
+ //
+ Value32 = MemNGetBitFieldNb (NBPtr, BFExtMctCfgHiReg);
+ Value32 &= 0xFFFFFC00;
+ Value32 |= (((UINT32) DcqBwThrotWm2 << 5) | (UINT32) DcqBwThrotWm1);
+ MemNSetBitFieldNb (NBPtr, BFExtMctCfgHiReg, Value32);
+
+ // Set LockDramCfg
+ if (IsFeatureEnabled (C6Cstate, NBPtr->MemPtr->PlatFormConfig, &(NBPtr->MemPtr->StdHeader))) {
+ IDS_SKIP_HOOK (IDS_LOCK_DRAM_CFG, NBPtr, &NBPtr->MemPtr->StdHeader) {
+ MemNSetBitFieldNb (NBPtr, BFLockDramCfg, 1);
+ }
+ }
+
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function create the HT memory map for KB
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNHtMemMapInitKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 WeReMask;
+ UINT8 LgcyMmioHoleEn;
+ UINT32 BottomIo;
+ UINT32 HoleOffset;
+ UINT32 DctLimitAddr;
+ UINT32 NodeSysBase;
+ UINT32 NodeSysLimit;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ DIE_STRUCT *MCTPtr;
+
+ RefPtr = NBPtr->RefPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ //
+ // Physical addresses in this function are right adjusted by 16 bits ([47:16])
+ // They are BottomIO, HoleOffset, DctLimitAddr, NodeSysBase, NodeSysLimit.
+ //
+
+ // Enforce bottom of IO be be 128MB aligned
+ BottomIo = (RefPtr->BottomIo & 0xF8) << 8;
+
+ if (MCTPtr->NodeMemSize != 0) {
+ NodeSysBase = 0;
+ NodeSysLimit = MCTPtr->NodeMemSize - 1;
+ DctLimitAddr = MCTPtr->DctData[0].Timings.DctMemSize;
+ LgcyMmioHoleEn = 0;
+
+ if (NodeSysLimit >= BottomIo) {
+ // HW Dram Remap
+ MCTPtr->Status[SbHWHole] = TRUE;
+ RefPtr->GStatus[GsbHWHole] = TRUE;
+ MCTPtr->NodeHoleBase = BottomIo;
+ RefPtr->HoleBase = BottomIo;
+
+ HoleOffset = _4GB_RJ16 - BottomIo;
+
+ NodeSysLimit += HoleOffset;
+
+ if ((DctLimitAddr > 0) && (DctLimitAddr < BottomIo)) {
+ HoleOffset += DctLimitAddr;
+ } else {
+ if (DctLimitAddr >= BottomIo) {
+ DctLimitAddr += HoleOffset;
+ }
+ HoleOffset += NodeSysBase;
+ LgcyMmioHoleEn = 1;
+ }
+
+ MemNSetBitFieldNb (NBPtr, BFDramHoleBase, BottomIo >> 8);
+ MemNSetBitFieldNb (NBPtr, BFDramHoleOffset, HoleOffset >> 7);
+ MemNSetBitFieldNb (NBPtr, BFDramHoleValid, 1);
+ MemNSetBitFieldNb (NBPtr, BFDramMemHoistValid, 1);
+ } else {
+ // No Remapping. Normal Contiguous mapping
+ }
+ MCTPtr->NodeSysBase = NodeSysBase;
+ MCTPtr->NodeSysLimit = NodeSysLimit;
+ RefPtr->SysLimit = MCTPtr->NodeSysLimit;
+
+ WeReMask = 3;
+ // Set the Dram base and set the WE and RE flags in the base.
+ MemNSetBitFieldNb (NBPtr, BFDramBaseReg0, (NodeSysBase << 8) | WeReMask);
+ // Set the Dram limit and set DstNode.
+ MemNSetBitFieldNb (NBPtr, BFDramLimitReg0, ((NodeSysLimit << 8) & 0xFFFF0000));
+
+ MemNSetBitFieldNb (NBPtr, BFDramBaseAddr, NodeSysBase >> (27 - 16));
+ MemNSetBitFieldNb (NBPtr, BFDramLimitAddr, NodeSysLimit >> (27 - 16));
+
+ MemNSetBitFieldNb (NBPtr, BFDramCtrlBaseReg0, 1);
+ MemNSetBitFieldNb (NBPtr, BFLgcyMmioHoleEn0, LgcyMmioHoleEn);
+ MemNSetBitFieldNb (NBPtr, BFDramCtrlLimitReg0, ((DctLimitAddr - 1) >> (27 - 16 - 11)) & 0xFFFFF800);
+ }
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * Report the Uma size that is going to be allocated.
+ * Total system memory UMASize
+ * >= 2G 512M
+ * >=1G 256M
+ * <1G 64M
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return Uma size [31:0] = Addr [47:16]
+ */
+UINT32
+MemNGetUmaSizeKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT32 SysMemSize;
+ UINT32 SizeOfUma;
+
+ SysMemSize = NBPtr->RefPtr->SysLimit + 1;
+ SysMemSize = (SysMemSize + 0x100) & 0xFFFFF000; // Ignore 16MB allocated for C6 when finding UMA size
+ if (SysMemSize >= 0x8000) {
+ SizeOfUma = 512 << (20 - 16);
+ } else if (SysMemSize >= 0x4000) {
+ SizeOfUma = 256 << (20 - 16);
+ } else {
+ SizeOfUma = 64 << (20 - 16);
+ }
+
+ return SizeOfUma;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function allocates 16MB of memory for C6 storage when it is requested to be enabled
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNAllocateC6StorageKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT32 SysLimit;
+ UINT32 DramLimitReg;
+
+ if (NBPtr->SharedPtr->C6Enabled || IsFeatureEnabled (C6Cstate, NBPtr->MemPtr->PlatFormConfig, &(NBPtr->MemPtr->StdHeader))) {
+
+ SysLimit = NBPtr->RefPtr->SysLimit;
+
+ // Calculate new SysLimit
+ if (!NBPtr->SharedPtr->C6Enabled) {
+ // System memory available is reduced by 16MB
+ SysLimit -= _16MB_RJ16;
+
+ NBPtr->MCTPtr->NodeSysLimit = SysLimit;
+ NBPtr->RefPtr->SysLimit = SysLimit;
+ NBPtr->SharedPtr->C6Enabled = TRUE;
+
+ // Set TOPMEM and MTRRs (only need to be done once for BSC)
+ MemNC6AdjustMSRs (NBPtr);
+ }
+
+ // Set Dram Limit
+ DramLimitReg = MemNGetBitFieldNb (NBPtr, BFDramLimitReg0) & 0x0000FFFF;
+ MemNSetBitFieldNb (NBPtr, BFDramLimitReg0, ((SysLimit << 8) & 0xFFFF0000) | DramLimitReg);
+ MemNSetBitFieldNb (NBPtr, BFDramLimitHiReg0, SysLimit >> 24);
+
+ // Set BFCC6SaveEn and LockDramCfg
+ MemNSetBitFieldNb (NBPtr, BFCC6SaveEn, 1);
+ IDS_SKIP_HOOK (IDS_LOCK_DRAM_CFG, NBPtr, &NBPtr->MemPtr->StdHeader) {
+ MemNSetBitFieldNb (NBPtr, BFLockDramCfg, 1);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function programs Powerdown and other power saving features for KB
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNPowerSavingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ //
+ // Phy Power Saving
+ //
+ MemNPhyPowerSavingMPstateKB (NBPtr);
+ if (NBPtr->MemPstateStage == MEMORY_PSTATE_3RD_STAGE) {
+ MemNChangeMemPStateContextNb (NBPtr, 1);
+ MemNPhyPowerSavingMPstateKB (NBPtr);
+ MemFInitTableDrive (NBPtr, MTAfterSettingMemoryPstate1);
+ MemNChangeMemPStateContextNb (NBPtr, 0);
+ }
+ //
+ // Power Down Enable
+ //
+ if (NBPtr->RefPtr->EnablePowerDown) {
+ MemNSetBitFieldNb (NBPtr, BFPowerDownEn, 1);
+ }
+ }
+ }
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function force the ECC symbol size
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *Size - ECC symbol size
+ *
+ * @return TRUE
+ */
+
+BOOLEAN
+MemNForceEccSymbolSizeKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Size
+ )
+{
+ *(BOOLEAN *)Size = FALSE;
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function disables scrubber temporarily for write access to
+ * DCT additional address space
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNDisableScrubberKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ NBPtr->DisDramScrub = NBPtr->GetBitField (NBPtr, BFDisDramScrub);
+ NBPtr->SetBitField (NBPtr, BFDisDramScrub, 1);
+ NBPtr->GetBitField (NBPtr, BFDisDramScrub);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function restores scrubber settings
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNRestoreScrubberKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ NBPtr->SetBitField (NBPtr, BFDisDramScrub, NBPtr->DisDramScrub);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function disable memory hole mappings
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *OptParam - Optional parameter
+ *
+ * @return TRUE
+ */
+
+BOOLEAN
+MemNDisableMemHoleMappingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ UINT8 Range;
+ CONST BIT_FIELD_NAME LgcyMmioHoleEnBF[] = {BFLgcyMmioHoleEn0};
+
+ for (Range = 0; Range < sizeof (LgcyMmioHoleEnBF) / sizeof (BIT_FIELD_NAME); Range++) {
+ NBPtr->LgcyMmioHoleEnMap &= ~(1 << Range);
+ NBPtr->LgcyMmioHoleEnMap |= (NBPtr->GetBitField (NBPtr, LgcyMmioHoleEnBF[Range]) << Range);
+ NBPtr->SetBitField (NBPtr, LgcyMmioHoleEnBF[Range], 0);
+ }
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function restore memory hole mappings
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *OptParam - Optional parameter
+ *
+ * @return TRUE
+ */
+
+BOOLEAN
+MemNRestoreMemHoleMappingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ UINT8 Range;
+ CONST BIT_FIELD_NAME LgcyMmioHoleEnBF[] = {BFLgcyMmioHoleEn0};
+
+ for (Range = 0; Range < sizeof (LgcyMmioHoleEnBF) / sizeof (BIT_FIELD_NAME); Range++) {
+ NBPtr->SetBitField (NBPtr, LgcyMmioHoleEnBF[Range], (NBPtr->LgcyMmioHoleEnMap >> Range) & 1);
+ }
+ return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnotkb.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnotkb.c
new file mode 100644
index 0000000..1b5350a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnotkb.c
@@ -0,0 +1,268 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnotkb.c
+ *
+ * Northbridge Non-SPD timings for KB
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/KB)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "OptionMemory.h"
+#include "mnkb.h"
+#include "mu.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_KB_MNOTKB_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets the non-SPD timings
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNOtherTimingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Programming of Non-SPD Timings.\n");
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctDimmValid > 0) {
+ MemNSetOtherTimingKB (NBPtr);
+ }
+ }
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets the non-SPD timings in PCI registers
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSetOtherTimingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ INT8 ROD;
+ INT8 WOD;
+ INT8 LD;
+ INT8 WrEarlyx2;
+ INT8 CDDTrdrdSdDc;
+ INT8 CDDTrdrdDd;
+ INT8 CDDTwrwrDd;
+ INT8 CDDTwrwrSdDc;
+ INT8 CDDTrwtTO;
+ INT8 CDDTwrrd;
+ UINT8 TrdrdSdDc;
+ UINT8 TrdrdDd;
+ UINT8 TwrwrSdDc;
+ UINT8 TwrwrDd;
+ UINT8 TrdrdSdSc;
+ UINT8 TwrwrSdSc;
+ UINT8 Twrrd;
+ UINT8 TrwtTO;
+ BOOLEAN PerRankTimingEn;
+
+ CH_DEF_STRUCT *ChannelPtr;
+ ChannelPtr = NBPtr->ChannelPtr;
+
+ PerRankTimingEn = (BOOLEAN) (MemNGetBitFieldNb (NBPtr, BFPerRankTimingEn));
+ //
+ // Latency Difference (LD) = Tcl - Tcwl
+ //
+ LD = (INT8) (MemNGetBitFieldNb (NBPtr, BFTcl)) - (INT8) (MemNGetBitFieldNb (NBPtr, BFTcwl));
+
+ //
+ // Read ODT Delay (ROD) = MAX ( 0, (RdOdtOnDuration - 6))
+ //
+ ROD = MAX (0, (INT8) (MemNGetBitFieldNb (NBPtr, BFRdOdtOnDuration) - 6));
+ //
+ // Write ODT Delay (WOD) = MAX (0, (WrOdtOnDuration - 6))
+ //
+ WOD = MAX (0, (INT8) (MemNGetBitFieldNb (NBPtr, BFWrOdtOnDuration) - 6));
+ //
+ // WrEarly = ABS (WrDqDqsEarly) / 2
+ //
+ WrEarlyx2 = (INT8) MemNGetBitFieldNb (NBPtr, BFWrDqDqsEarly);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tLD: %d ROD: %d WOD: %d WrEarlyx2: %d\n\n", LD, ROD, WOD, WrEarlyx2);
+ //
+ // Read to Read Timing (TrdrdSdSc, TrdrdScDc, TrdrdDd)
+ //
+ // TrdrdSdSc = 1.
+ // TrdrdSdDc (in MEMCLKs) = MAX(TrdrdSdSc, 3 + (IF (D18F2xA8_dct[0][PerRankTimingEn])
+ // THEN CEIL(CDDTrdrdSdDc / 2 + 0.5) ELSE 0 ENDIF)).
+ // TrdrdDd (in MEMCLKs) = MAX(TrdrdSdDc, ROD + 3, CEIL(CDDTrdrdDd/2 + 3.5)).
+ //
+ TrdrdSdSc = 1;
+
+ CDDTrdrdSdDc = (INT8) MemNCalcCDDNb (NBPtr, AccessRcvEnDly, AccessRcvEnDly, TRUE, FALSE);
+ TrdrdSdDc = MAX (TrdrdSdSc, PerRankTimingEn ? (3 + (CDDTrdrdSdDc + 1 + 1) / 2) : 3);
+
+ CDDTrdrdDd = (INT8) MemNCalcCDDNb (NBPtr, AccessRcvEnDly, AccessRcvEnDly, FALSE, TRUE);
+ TrdrdDd = MAX (ROD + 3, (CDDTrdrdDd + 7 + 1) / 2);
+ TrdrdDd = MAX (TrdrdSdDc, TrdrdDd);
+
+ MemNSetBitFieldNb (NBPtr, BFTrdrdDd, (UINT32) TrdrdDd);
+ MemNSetBitFieldNb (NBPtr, BFTrdrdSdDc, (UINT32) TrdrdSdDc);
+ MemNSetBitFieldNb (NBPtr, BFTrdrdSdSc, (UINT32) TrdrdSdSc);
+ //
+ // Write to Write Timing (TwrwrSdSc, TwrwrScDc, TwrwrDd)
+ //
+ // TwrwrSdSc (in MEMCLKs) = 1.
+ // TwrwrSdDc (in MEMCLKs) = MAX(TwrwrSdSc, WOD + 3, 3 + (IF (D18F2xA8_dct[0][PerRank-TimingEn])
+ // THEN CEIL(CDDTwrwrSdDc / 2 + 0.5) ELSE 0 ENDIF)).
+ //
+ // TwrwrDd (in MEMCLKs) = MAX(TwrwrSdDc, WOD + 3, CEIL(CDDTwrwrDd / 2 + 3.5)).
+ //
+ TwrwrSdSc = 1;
+
+ CDDTwrwrSdDc = (INT8) MemNCalcCDDNb (NBPtr, AccessWrDqsDly, AccessWrDqsDly, TRUE, FALSE);
+ TwrwrSdDc = (UINT8) MAX ((UINT8) (WOD + 3), (3 + (PerRankTimingEn ? ((CDDTwrwrSdDc + 1 + 1) / 2) : 0)));
+ TwrwrSdDc = MAX (TwrwrSdSc, TwrwrSdDc);
+
+ CDDTwrwrDd = (INT8) MemNCalcCDDNb (NBPtr, AccessWrDqsDly, AccessWrDqsDly, FALSE, TRUE);
+ TwrwrDd = (UINT8) MAX ((UINT8) (WOD + 3), (CDDTwrwrDd + 7 + 1) / 2);
+ TwrwrDd = MAX (TwrwrSdDc, TwrwrDd);
+
+ MemNSetBitFieldNb (NBPtr, BFTwrwrDd, (UINT32) TwrwrDd);
+ MemNSetBitFieldNb (NBPtr, BFTwrwrSdDc, (UINT32) TwrwrSdDc);
+ MemNSetBitFieldNb (NBPtr, BFTwrwrSdSc, (UINT32) TwrwrSdSc);
+ //
+ // Write to Read DIMM Termination Turn-around
+ //
+ // Twrrd (in MEMCLKs) = MAX(1, MAX(WOD, CEIL(CDDTwrrd / 2 + 2 - WrEarly)) - LD + 3).
+ //
+ CDDTwrrd = (INT8) MemNCalcCDDNb (NBPtr, AccessWrDqsDly, AccessRcvEnDly, FALSE, TRUE);
+ Twrrd = MAX (1, MAX (WOD, (CDDTwrrd + 1 + 4 - WrEarlyx2) / 2) - LD + 3);
+
+ MemNSetBitFieldNb (NBPtr, BFTwrrd, (UINT32) Twrrd);
+ //
+ // Read to Write Turnaround for Data, DQS Contention
+ //
+ // TrwtTO (in MEMCLKs) = MAX(ROD, CEIL(CDDTrwtTO / 2 + WrEarly)) + LD + 3
+ // If 1 DIMM/ch, substitute ROD = 0 in the above equation.
+ //
+ CDDTrwtTO = (INT8) MemNCalcCDDNb (NBPtr, AccessRcvEnDly, AccessWrDqsDly, TRUE, TRUE);
+
+ TrwtTO = MAX ((ChannelPtr->Dimms == 1 ? 0 : ROD) , (CDDTrwtTO + WrEarlyx2 + 1) / 2) + LD + 3;
+
+ MemNSetBitFieldNb (NBPtr, BFTrwtTO, (UINT32) TrwtTO);
+ //
+ // Read to Write Turnaround for opportunistic Write Bursting
+ //
+ // TrwtWB = TrwtTO + 1
+ //
+ MemNSetBitFieldNb (NBPtr, BFTrwtWB, (UINT32) TrwtTO + 1);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t TrdrdSdSc : %02x\n", TrdrdSdSc);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCDDTrdrdSdDc : %02x TrdrdSdDc : %02x\n", CDDTrdrdSdDc, TrdrdSdDc);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCDDTrdrdDd : %02x TrdrdDd : %02x\n\n", CDDTrdrdDd, TrdrdDd);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t TwrwrSdSc : %02x\n", TwrwrSdSc);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCDDTwrwrSdDc : %02x TwrwrSdDc : %02x\n", CDDTwrwrSdDc, TwrwrSdDc );
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCDDTwrwrDd : %02x TwrwrDd : %02x\n\n", CDDTwrwrDd, TwrwrDd);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t TrwtWB : %02x\n", TrwtTO + 1);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCDDTwrrd : %02x Twrrd : %02x\n", (UINT8) CDDTwrrd, (UINT8) Twrrd );
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCDDTrwtTO : %02x TrwtTO : %02x\n\n", (UINT8) CDDTrwtTO, (UINT8) TrwtTO );
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnphykb.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnphykb.c
new file mode 100644
index 0000000..17a3779
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnphykb.c
@@ -0,0 +1,1078 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnphykb.c
+ *
+ * Northbridge Phy support for KB
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/KB)
+ * @e \$Revision: 87494 $ @e \$Date: 2013-02-04 12:06:47 -0600 (Mon, 04 Feb 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "ma.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "OptionMemory.h" // need def for MEM_FEAT_BLOCK_NB
+#include "mnkb.h"
+#include "PlatformMemoryConfiguration.h"
+#include "cpuFamRegisters.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_KB_MNPHYKB_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+
+/// The structure of TxPrePN tables
+typedef struct {
+ UINT32 Speed; ///< Applied memory speed
+ UINT16 TxPrePNVal[6]; ///< Table values
+} TXPREPN_STRUCT;
+
+/// The entry of individual TxPrePN tables
+typedef struct {
+ UINT8 TxPrePNTblSize; ///< Total Table size
+ CONST TXPREPN_STRUCT *TxPrePNTblPtr; ///< Pointer to the table
+} TXPREPN_ENTRY;
+
+/// Type of an entry for processing phy init compensation for KB
+typedef struct {
+ BIT_FIELD_NAME IndexBitField; ///< Bit field on which the value is decided
+ BIT_FIELD_NAME StartTargetBitField; ///< First bit field to be modified
+ BIT_FIELD_NAME EndTargetBitField; ///< Last bit field to be modified
+ UINT16 ExtraValue; ///< Extra value needed to be written to bit field
+ CONST TXPREPN_ENTRY *TxPrePN; ///< Pointer to slew rate table
+} PHY_COMP_INIT_NB;
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemNRdPosTrnKB (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR3[];
+/* -----------------------------------------------------------------------------*/
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes the DDR phy compensation logic
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitPhyCompKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ //
+ // Phy Predriver Calibration Codes for Data/DQS
+ //
+ CONST STATIC TXPREPN_STRUCT TxPrePNDataDqsV15KB[] = {
+ //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.5V
+ {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600 + DDR1866 + DDR2133, {0xFFF, 0x410, 0x208, 0x104}}
+ };
+ CONST STATIC TXPREPN_STRUCT TxPrePNDataDqsV135KB[] = {
+ //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.35V
+ {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600 + DDR1866 + DDR2133, {0xFFF, 0xFFF, 0x820, 0x410}}
+ };
+ CONST STATIC TXPREPN_STRUCT TxPrePNDataDqsV125KB[] = {
+ //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.25V
+ {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600 + DDR1866 + DDR2133, {0xFFF, 0xFFF, 0xFFF, 0xFFF}}
+ };
+ CONST STATIC TXPREPN_ENTRY TxPrePNDataDqsKB[] = {
+ {GET_SIZE_OF (TxPrePNDataDqsV15KB), (TXPREPN_STRUCT *)&TxPrePNDataDqsV15KB},
+ {GET_SIZE_OF (TxPrePNDataDqsV135KB), (TXPREPN_STRUCT *)&TxPrePNDataDqsV135KB},
+ {GET_SIZE_OF (TxPrePNDataDqsV125KB), (TXPREPN_STRUCT *)&TxPrePNDataDqsV125KB}
+ };
+
+ //
+ // Phy Predriver Calibration Codes for Cmd/Addr
+ //
+ CONST STATIC TXPREPN_STRUCT TxPrePNCmdAddrV15KB[] = {
+ //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.5V
+ {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600 + DDR1866 + DDR2133, {0x082, 0x041, 0x041, 0x041, 0x000, 0x0C3}}
+ };
+ CONST STATIC TXPREPN_STRUCT TxPrePNCmdAddrV135KB[] = {
+ //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.35V
+ {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600 + DDR1866 + DDR2133, {0x186, 0x104, 0x0C3, 0x082, 0x000, 0x208}}
+ };
+ CONST STATIC TXPREPN_STRUCT TxPrePNCmdAddrV125KB[] = {
+ //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.25V
+ {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600 + DDR1866 + DDR2133, {0x30C, 0x28A, 0x208, 0x186, 0x000, 0x410}}
+ };
+ CONST STATIC TXPREPN_ENTRY TxPrePNCmdAddrKB[] = {
+ {GET_SIZE_OF (TxPrePNCmdAddrV15KB), (TXPREPN_STRUCT *)&TxPrePNCmdAddrV15KB},
+ {GET_SIZE_OF (TxPrePNCmdAddrV135KB), (TXPREPN_STRUCT *)&TxPrePNCmdAddrV135KB},
+ {GET_SIZE_OF (TxPrePNCmdAddrV125KB), (TXPREPN_STRUCT *)&TxPrePNCmdAddrV125KB}
+ };
+
+ //
+ // Phy Predriver Calibration Codes for Clock
+ //
+ CONST STATIC TXPREPN_STRUCT TxPrePNClockV15KB[] = {
+ //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.5V
+ {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600 + DDR1866 + DDR2133, {0xFFF, 0xFFF, 0xFFF, 0x820, 0x000, 0xFFF}}
+ };
+ CONST STATIC TXPREPN_STRUCT TxPrePNClockV135KB[] = {
+ //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.35V
+ {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600 + DDR1866 + DDR2133, {0xFFF, 0xFFF, 0xFFF, 0xFFF, 0x000, 0xFFF}}
+ };
+ CONST STATIC TXPREPN_STRUCT TxPrePNClockV125KB[] = {
+ //{TxPreP, TxPreN}[Speed][Drive Strength] at 1.25V
+ {DDR667 + DDR800 + DDR1066 + DDR1333 + DDR1600 + DDR1866 + DDR2133, {0xFFF, 0xFFF, 0xFFF, 0xFFF, 0x000, 0xFFF}}
+ };
+ CONST STATIC TXPREPN_ENTRY TxPrePNClockKB[] = {
+ {GET_SIZE_OF (TxPrePNClockV15KB), (TXPREPN_STRUCT *)&TxPrePNClockV15KB},
+ {GET_SIZE_OF (TxPrePNClockV135KB), (TXPREPN_STRUCT *)&TxPrePNClockV135KB},
+ {GET_SIZE_OF (TxPrePNClockV125KB), (TXPREPN_STRUCT *)&TxPrePNClockV125KB}
+ };
+
+ //
+ // Tables to describe the relationship between drive strength bit fields, PreDriver Calibration bit fields and also
+ // the extra value that needs to be written to specific PreDriver bit fields
+ //
+ CONST PHY_COMP_INIT_NB PhyCompInitBitFieldKB[] = {
+ // 3. Program TxPreP/TxPreN for Data and DQS according toTable 25 if VDDIO is 1.5V or Table 26 if 1.35V.
+ // A. Program D18F2x9C_x0D0F_0[F,7:0]0[A,6]_dct[1:0]={0000b, TxPreP, TxPreN}.
+ // B. Program D18F2x9C_x0D0F_0[F,7:0]02_dct[1:0]={0000b, TxPreP, TxPreN}.
+ {BFDqsDrvStren, BFDataByteTxPreDriverCal2Pad1, BFDataByteTxPreDriverCal2Pad1, 0, TxPrePNDataDqsKB},
+ {BFDataDrvStren, BFDataByteTxPreDriverCal2Pad2, BFDataByteTxPreDriverCal2Pad2, 0, TxPrePNDataDqsKB},
+ {BFDataDrvStren, BFDataByteTxPreDriverCal, BFDataByteTxPreDriverCal, 8, TxPrePNDataDqsKB},
+ // 4. Program TxPreP/TxPreN for Cmd/Addr according to Table 28 if VDDIO is 1.5V or Table 29 if 1.35V.
+ // A. Program D18F2x9C_x0D0F_[C,8][1:0][12,0E,0A,06]_dct[1:0]={0000b, TxPreP, TxPreN}.
+ // B. Program D18F2x9C_x0D0F_[C,8][1:0]02_dct[1:0]={1000b, TxPreP, TxPreN}.
+ {BFCsOdtDrvStren, BFCmdAddr0TxPreDriverCal2Pad1, BFCmdAddr0TxPreDriverCal2Pad2, 0, TxPrePNCmdAddrKB},
+ {BFAddrCmdDrvStren, BFCmdAddr1TxPreDriverCal2Pad1, BFAddrTxPreDriverCal2Pad4, 0, TxPrePNCmdAddrKB},
+ {BFCsOdtDrvStren, BFCmdAddr0TxPreDriverCalPad0, BFCmdAddr0TxPreDriverCalPad0, 8, TxPrePNCmdAddrKB},
+ {BFCkeDrvStren, BFAddrTxPreDriverCalPad0, BFAddrTxPreDriverCalPad0, 8, TxPrePNCmdAddrKB},
+ {BFAddrCmdDrvStren, BFCmdAddr1TxPreDriverCalPad0, BFCmdAddr1TxPreDriverCalPad0, 8, TxPrePNCmdAddrKB},
+ // 5. Program TxPreP/TxPreN for Clock according to Table 31 if VDDIO is 1.5V or Table 32 if 1.35V.
+ // A. Program D18F2x9C_x0D0F_2[2:0]02_dct[1:0]={1000b, TxPreP, TxPreN}.
+ {BFClkDrvStren, BFClock0TxPreDriverCalPad0, BFClock1TxPreDriverCalPad0, 8, TxPrePNClockKB}
+ };
+
+ CONST PHY_COMP_INIT_NB PhyCompInitBitFieldUpdateKB[] = {
+ // 3. Program TxPreP/TxPreN for Data and DQS according toTable 25 if VDDIO is 1.5V or Table 26 if 1.35V.
+ // B. Program D18F2x9C_x0D0F_0[F,7:0]02_dct[1:0]={0000b, TxPreP, TxPreN}.
+ {BFDataDrvStren, BFDataByteTxPreDriverCal, BFDataByteTxPreDriverCal, 8, TxPrePNDataDqsKB},
+ };
+
+ BIT_FIELD_NAME CurrentBitField;
+ UINT32 SpeedMask;
+ UINT8 SizeOfTable;
+ UINT8 Voltage;
+ UINT8 i;
+ UINT8 j;
+ UINT8 k;
+ UINT8 Dct;
+ CONST TXPREPN_STRUCT *TblPtr;
+ UINT8 TxP;
+ UINT8 TxN;
+ UINT32 POdt;
+ UINT32 NOdt;
+
+ Dct = NBPtr->Dct;
+ NBPtr->SwitchDCT (NBPtr, 0);
+ // 1. Program D18F2x[1,0]9C_x0000_0008[DisAutoComp, DisablePreDriverCal] = {1b, 1b}.
+ MemNSetBitFieldNb (NBPtr, BFDisablePredriverCal, 3);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+
+ SpeedMask = (UINT32) 1 << (NBPtr->DCTPtr->Timings.Speed / 66);
+ Voltage = (UINT8) CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage);
+
+ for (j = 0; j < GET_SIZE_OF (PhyCompInitBitFieldKB); j ++) {
+ i = (UINT8) MemNGetBitFieldNb (NBPtr, PhyCompInitBitFieldKB[j].IndexBitField);
+ ASSERT (i < 4 || i == 5);
+ TblPtr = (PhyCompInitBitFieldKB[j].TxPrePN[Voltage]).TxPrePNTblPtr;
+ SizeOfTable = (PhyCompInitBitFieldKB[j].TxPrePN[Voltage]).TxPrePNTblSize;
+ for (k = 0; k < SizeOfTable; k++, TblPtr++) {
+ if ((TblPtr->Speed & SpeedMask) != 0) {
+ for (CurrentBitField = PhyCompInitBitFieldKB[j].StartTargetBitField; CurrentBitField <= PhyCompInitBitFieldKB[j].EndTargetBitField; CurrentBitField ++) {
+ ASSERT (TblPtr->TxPrePNVal[i] != 0);
+ MemNSetBitFieldNb (NBPtr, CurrentBitField, ((PhyCompInitBitFieldKB[j].ExtraValue << 12) | TblPtr->TxPrePNVal[i]));
+ }
+ break;
+ }
+ }
+ // Asserting if no table is found corresponding to current memory speed.
+ ASSERT (k < SizeOfTable);
+ }
+ NBPtr->SwitchDCT (NBPtr, 0);
+ // 6. Program D18F2x9C_x0000_0008_dct[1:0]_mp[1:0][DisAutoComp] = 0.
+ MemNSetBitFieldNb (NBPtr, BFDisablePredriverCal, 1);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+
+ // ODT Calibration Codes Saturation Workaround
+ if ((NBPtr->MCTPtr->LogicalCpuid.Revision & AMD_F16_KB_A0) != 0) {
+ // 7. Wait 20us.
+ MemUWait10ns (20000, NBPtr->MemPtr);
+ // 8. Program D18F2x9C_x0000_0008_dct[#NUM_DCTS#]_mp[1:0][DisAutoComp] = 1. Wait 20us.
+ MemNSetBitFieldNb (NBPtr, BFDisablePredriverCal, 3);
+ MemUWait10ns (20000, NBPtr->MemPtr);
+ // 9. Compute POdt and NOdt for VDDIO as follows based on Table 44:
+ // POdt = (SlopeP * D18F2x9C_x0D0F_4001_dct[#NUM_DCTS#][TxP] + InterceptP) / 10000
+ // POdt = POdt > 63 ? 63 : POdt
+ // NOdt = (SlopeN * D18F2x9C_x0D0F_4001_dct[#NUM_DCTS#][TxN] + InterceptN) / 10000
+ // NOdt = NOdt > 63 ? 63 : NOdt
+ TxP = (UINT8) ((MemNGetBitFieldNb (NBPtr, BFTxP) >> 8) & 0xFF);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\tTxP: %08X\n", TxP);
+ TxN = (UINT8)MemNGetBitFieldNb (NBPtr, BFTxN);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\tTxN: %08X\n", TxN);
+ POdt = 0;
+ NOdt = 0;
+ if (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) {
+ POdt = (3497 * TxP + 115010 + 9999) / 10000;
+ NOdt = (3725 * TxN + 119020 + 9999) / 10000;
+ } else if (NBPtr->RefPtr->DDR3Voltage == VOLT1_35) {
+ POdt = (3403 * TxP + 99205 + 9999) / 10000;
+ NOdt = (3514 * TxN + 112930 + 9999) / 10000;
+ } else if (NBPtr->RefPtr->DDR3Voltage == VOLT1_25) {
+ POdt = (2400 * TxP + 119620 + 9999) / 10000;
+ NOdt = (2971 * TxN + 120050 + 9999) / 10000;
+ } else {
+ ASSERT (FALSE);
+ }
+
+ POdt = (POdt > 63) ? 63 : POdt;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nOBS357142 POdt: %02X\n", POdt);
+ NOdt = (NOdt > 63) ? 63 : NOdt;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nOBS357142 NOdt: %02X\n", NOdt);
+
+ // 10. Broadcast write the computed POdt and NOdt:
+ // D18F2x9C_x0D0F_1C00_dct[0] = {00b, POdt, 00b, NOdt}.
+ // D18F2x9C_x0D0F_1C00_dct[0] is the broadcast write address for D18F2x9C_x0D0F_0[F,8:0]0[B,7,3]_dct[0]
+ MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F0B, ((POdt << 8) & 0x3F00) + NOdt);
+ MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F07, ((POdt << 8) & 0x3F00) + NOdt);
+ MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F03, ((POdt << 8) & 0x3F00) + NOdt);
+
+ // 11. Set Calibration Valid bit for calibration update according to Table 45, Table 46, or Table 47:
+ // Program D18F2x9C_x0D0F_0[F,8:0]02_dct[#NUM_DCTS#]={1000b, TxPreP, TxPreN}.
+ for (j = 0; j < GET_SIZE_OF (PhyCompInitBitFieldUpdateKB); j ++) {
+ i = (UINT8) MemNGetBitFieldNb (NBPtr, PhyCompInitBitFieldUpdateKB[j].IndexBitField);
+ ASSERT (i < 4 || i == 5);
+ TblPtr = (PhyCompInitBitFieldUpdateKB[j].TxPrePN[Voltage]).TxPrePNTblPtr;
+ SizeOfTable = (PhyCompInitBitFieldUpdateKB[j].TxPrePN[Voltage]).TxPrePNTblSize;
+ for (k = 0; k < SizeOfTable; k++, TblPtr++) {
+ if ((TblPtr->Speed & SpeedMask) != 0) {
+ for (CurrentBitField = PhyCompInitBitFieldUpdateKB[j].StartTargetBitField; CurrentBitField <= PhyCompInitBitFieldUpdateKB[j].EndTargetBitField; CurrentBitField ++) {
+ ASSERT (TblPtr->TxPrePNVal[i] != 0);
+ MemNSetBitFieldNb (NBPtr, CurrentBitField, ((PhyCompInitBitFieldUpdateKB[j].ExtraValue << 12) | TblPtr->TxPrePNVal[i]));
+ }
+ break;
+ }
+ }
+ // Asserting if no table is found corresponding to current memory speed.
+ ASSERT (k < SizeOfTable);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This is a general purpose function that executes before DRAM training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNBeforeDQSTrainingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ MemNSetBitFieldNb (NBPtr, BFTrNibbleSel, 0);
+ //
+ // 2.10.6.9.2 - BIOS should program D18F2x210_dct[1:0]_nbp[3:0][MaxRdLatency] to 55h.
+ //
+ MemNSetBitFieldNb (NBPtr, BFMaxLatency, 0x55);
+ NBPtr->CsPerDelay = MemNCSPerDelayNb (NBPtr);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This is a function that executes after DRAM training for KB
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNAfterDQSTrainingKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+ UINT8 Dimm;
+ UINT8 Byte;
+ UINT16 Dly;
+
+ MemNBrdcstSetNb (NBPtr, BFMemPhyPllPdMode, 2);
+ MemNBrdcstSetNb (NBPtr, BFPllLockTime, 0x190);
+
+ //
+ // Synch RdDqs2dDly to RdDqsDly for S3 Save/Restore
+ //
+ for (Dct = 0; Dct < MAX_DCTS_PER_NODE_KB; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ if (!(NBPtr->DctCachePtr->Is2Dx4)) {
+ // Only synch when 1D training has been performed or 2D training with x8 DIMMs
+ for (Dimm = 0; Dimm < 4; Dimm++) {
+ for (Byte = 0; Byte < 9; Byte++) {
+ Dly = (UINT16) MemNGetTrainDlyNb (NBPtr, AccessRdDqsDly, DIMM_BYTE_ACCESS (Dimm, Byte));
+ MemNSetTrainDlyNb (NBPtr, AccessRdDqs2dDly, DIMM_NBBL_ACCESS (Dimm, Byte * 2), Dly);
+ MemNSetTrainDlyNb (NBPtr, AccessRdDqs2dDly, DIMM_NBBL_ACCESS (Dimm, (Byte * 2) + 1), Dly);
+ NBPtr->ChannelPtr->RdDqs2dDlys[(Dimm * MAX_NUMBER_LANES) + (Byte * 2)] = (UINT8) Dly;
+ NBPtr->ChannelPtr->RdDqs2dDlys[(Dimm * MAX_NUMBER_LANES) + (Byte * 2) + 1] = (UINT8) Dly;
+ }
+ }
+ }
+ }
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function overrides the seed for hardware based RcvEn training of KB.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *SeedPtr - Pointer to the seed value.
+ *
+ * @return TRUE
+ */
+
+BOOLEAN
+MemNOverrideRcvEnSeedKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *SeedPtr
+ )
+{
+ UINT16 SeedVal;
+ UINT8 MaxSolderedDownDimmPerCh;
+ UINT8 *DimmsPerChPtr;
+
+ MaxSolderedDownDimmPerCh = GetMaxSolderedDownDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID);
+ DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ PSO_SOLDERED_DOWN_SODIMM_TYPE,
+ NBPtr->MCTPtr->SocketId,
+ NBPtr->ChannelPtr->ChannelID,
+ 0, NULL, NULL);
+ if (MaxSolderedDownDimmPerCh != 0 || DimmsPerChPtr != NULL) {
+ // Solder-down DRAM
+ SeedVal = 0x20;
+ } else if (NBPtr->ChannelPtr->SODimmPresent != 0) {
+ // SODIMM
+ SeedVal = 0x32;
+ } else {
+ // Unbuffered dimm
+ SeedVal = 0x32;
+ }
+
+ *(UINT16 *)SeedPtr = SeedVal - (0x20 * (UINT16) MemNGetBitFieldNb (NBPtr, BFWrDqDqsEarly));
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function choose the correct PllLockTime for KB
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *PllLockTime - Bit offset of the field to be programmed
+ *
+ * @return TRUE
+ */
+BOOLEAN
+MemNAdjustPllLockTimeKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *PllLockTime
+ )
+{
+ if (MemNGetBitFieldNb (NBPtr, BFMemPhyPllPdMode) == 2) {
+ *(UINT16*) PllLockTime = 0x190;
+ }
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function overrides the seed for hardware based WL for KB.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *SeedPtr - Pointer to the seed value.
+ *
+ * @return TRUE
+ */
+
+BOOLEAN
+MemNOverrideWLSeedKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *SeedPtr
+ )
+{
+ UINT8 MaxSolderedDownDimmPerCh;
+ UINT8 *DimmsPerChPtr;
+
+ MaxSolderedDownDimmPerCh = GetMaxSolderedDownDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID);
+ DimmsPerChPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ PSO_SOLDERED_DOWN_SODIMM_TYPE,
+ NBPtr->MCTPtr->SocketId,
+ NBPtr->ChannelPtr->ChannelID,
+ 0, NULL, NULL);
+ if (MaxSolderedDownDimmPerCh != 0 || DimmsPerChPtr != NULL) {
+ // Solder-down DRAM
+ *(UINT8*) SeedPtr = 0xE;
+ } else if (NBPtr->ChannelPtr->SODimmPresent != 0) {
+ // SODIMM
+ *(UINT8*) SeedPtr = 0xE;
+ } else {
+ // Unbuffered dimm
+ *(UINT8*) SeedPtr = 0x15;
+ }
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function adjusts Avg PRE value of Phy fence training for KB.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *Value16 - Pointer to the value that we want to adjust
+ *
+ */
+VOID
+MemNPFenceAdjustKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT INT16 *Value16
+ )
+{
+ // If FenceTrSel != 00b subtract Char.Temp:8
+ if (MemNGetBitFieldNb (NBPtr, BFFenceTrSel) != 0) {
+ *Value16 -= 8;
+ }
+
+ if (*Value16 < 0) {
+ *Value16 = 0;
+ }
+
+ // This makes sure the phy fence value will be written to M1 context as well.
+ MULTI_MPSTATE_COPY_TSEFO (NBPtr->NBRegTable, BFPhyFence);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function programs Fence2RxDll for KB.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *Fence2Data - Pointer to the value of fence2 data
+ *
+ */
+BOOLEAN
+MemNProgramFence2RxDllKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Fence2Data
+ )
+{
+ UINT16 Fence2RxDllTxPad;
+ UINT16 Fence2Value;
+ UINT16 Fence1;
+
+ Fence2Value = (UINT16) MemNGetBitFieldNb (NBPtr, BFFence2);
+ Fence2RxDllTxPad = (*(UINT16*) Fence2Data & 0x1F) | (((*(UINT16*) Fence2Data >> 5) & 0x1F) << 10);
+
+ Fence2Value &= ~(UINT16) ((0x1F << 10) | 0x1F);
+ Fence2Value |= Fence2RxDllTxPad;
+ MemNSetBitFieldNb (NBPtr, BFFence2, Fence2Value);
+
+ if (NBPtr->MemPstateStage == MEMORY_PSTATE_1ST_STAGE) {
+ MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 30, 16, BFPhyFence);
+
+ Fence1 = (UINT16) MemNGetBitFieldNb (NBPtr, BFPhyFence);
+ MemNSetBitFieldNb (NBPtr, BFChAM1FenceSave, Fence1);
+ }
+
+ return TRUE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function checks if RdDqsDly needs to be restarted for Kabini
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *Center - Center of the data eye
+ *
+ * @return TRUE
+ */
+
+BOOLEAN
+MemNRdDqsDlyRestartChkKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Center
+ )
+{
+ INT8 EyeCenter;
+ UINT8 ByteLane;
+ BOOLEAN RetVal;
+ MEM_TECH_BLOCK *TechPtr;
+ CH_DEF_STRUCT *ChanPtr;
+
+ TechPtr = NBPtr->TechPtr;
+ ChanPtr = NBPtr->ChannelPtr;
+ ByteLane = NBPtr->TechPtr->Bytelane;
+ RetVal = TRUE;
+
+ // If the average value of passing read DQS delay for the lane is negative, then adjust the input receiver
+ // DQ delay in D18F2x9C_x0D0F_0[F,7:0][5F,1F]_dct[1:0] for the lane as follows:
+
+ EyeCenter = ((INT8) ChanPtr->RdDqsMinDlys[ByteLane] + (INT8) ChanPtr->RdDqsMaxDlys[ByteLane] + 1) / 2;
+
+ if ((EyeCenter < 0) && (NBPtr->RdDqsDlyRetrnStat != RDDQSDLY_RTN_SUSPEND)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " Negative data eye center.\n");
+
+ if (MemNGetBitFieldNb (NBPtr, BFRxDqInsDly) < 3) {
+ // IF (RxDqInsDly < 3) THEN increment RxDqInsDly and repeat step 3 above for all ranks and lanes
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tRxDqInsDly < 3, increment it and restart RdDqsDly training on current Dct.\n");
+
+ MemNSetBitFieldNb (NBPtr, BFRxDqInsDly, MemNGetBitFieldNb (NBPtr, BFRxDqInsDly) + 1);
+ NBPtr->RdDqsDlyRetrnStat = RDDQSDLY_RTN_ONGOING;
+
+ // When Retrain condition is detected, record the current chipsel at which the retrain starts
+ // so we don't need to retrain RcvEnDly and WrDatDly on the chipsels that are already done with these steps.
+ if (TechPtr->RestartChipSel < ((INT8) TechPtr->ChipSel)) {
+ TechPtr->RestartChipSel = (INT8) TechPtr->ChipSel;
+ }
+
+ RetVal = FALSE;
+ } else {
+ // ELSE program the read DQS delay for the lane with a value of zero
+ IDS_HDT_CONSOLE (MEM_FLOW, " ");
+ IDS_HDT_CONSOLE (MEM_FLOW, "Center of data eye is still negative after 2 retires. Do not restart training, just use 0\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t ");
+ *(UINT8 *) Center = 0;
+ }
+ }
+
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - All bytelanes pass
+ * @return FALSE - Some bytelanes fail
+*/
+BOOLEAN
+MemNRdPosTrnKB (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ BOOLEAN RetVal;
+
+ if (((INT8) TechPtr->ChipSel) > TechPtr->RestartChipSel) {
+ RetVal = MemTRdPosWithRxEnDlySeeds3 (TechPtr);
+ } else {
+ // Skip RcvEnDly cycle training when current chip select has already gone through that step.
+ // Because a retrain condition can only be detected on a chip select after RcvEnDly cycle training
+ // So when current chip select is equal to RestartChipSel, we don't need to redo RcvEnDly cycle training.
+ // Only redo DQS position training.
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tSkip RcvEnDly Cycle Training on Current Chip Select.\n\n");
+ RetVal = MemTTrainDQSEdgeDetect (TechPtr);
+ }
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function skips WrDatDly training when a retrain condition is just detected
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *ChipSel - Pointer to ChipSel
+ *
+ * @return TRUE
+ */
+
+BOOLEAN
+MemNHookBfWrDatTrnKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *ChipSel
+ )
+{
+ BOOLEAN RetVal;
+
+ RetVal = TRUE;
+ if (NBPtr->RdDqsDlyRetrnStat == RDDQSDLY_RTN_ONGOING) {
+ NBPtr->RdDqsDlyRetrnStat = RDDQSDLY_RTN_NEEDED;
+ // Clear chipsel value to force a restart of Rd Dqs Training
+ if (NBPtr->CsPerDelay == 1) {
+ *(UINT8 *) ChipSel = 0xFF;
+ } else {
+ *(UINT8 *) ChipSel = 0xFE;
+ }
+
+ RetVal = FALSE;
+ } else if (((INT8) NBPtr->TechPtr->ChipSel) < NBPtr->TechPtr->RestartChipSel) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSkip WrDatDly Training on Current Chip Select.\n\n");
+ // Skip WrDatDly training when current chip select has gone through WrDatDly procedure
+ // A retrain is detected during RdDqsDly training, so if RestartChipSel is equal to current
+ // chip select, then WrDatDly has not been started for current chip select in the previous cycle.
+ // However, RcvEnDly cycle training has been done for current chip select.
+ // So we don't need to do RcvEnDly cycle training when current chip select is equal to RestartChipSel
+ // but we need to do WrDatDly training for current chip select.
+ RetVal = FALSE;
+ }
+
+ // when return is FALSE, WrDatDly training will be skipped
+
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets up output driver and write leveling mode in MR1 during WL
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *Value - MR1 value
+ *
+ * @return TRUE
+ */
+
+BOOLEAN
+MemNWLMR1KB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Value
+ )
+{
+ BOOLEAN Target;
+
+ // For the target rank of the target DIMM, enable write leveling mode and enable the output driver.
+ // For all other ranks of the target DIMM, enable write leveling mode and disable the output driver.
+ Target = (BOOLEAN) (*(UINT16 *) Value >> 7) & 1;
+
+ if (NBPtr->CsPerDelay == 1) {
+ // Clear Qoff and reset it based on KB requirement
+ *(UINT16 *) Value &= ~((UINT16) 1 << 12);
+
+ if (!Target) {
+ *(UINT16 *) Value |= (((UINT16) 1 << 7) | ((UINT16) 1 << 12));
+ }
+ }
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs POdtOff to disable/enable receiver pad termination
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *Value - POdtOff value
+ *
+ * @return TRUE
+ */
+
+BOOLEAN
+MemNProgramPOdtOffKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Value
+ )
+{
+ MemNSetBitFieldNb (NBPtr, BFPOdtOff, (*(BOOLEAN *) Value) ? 0x1000 : 0);
+
+ return TRUE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function adjust the SeedGross value for hardware Receiver Enable Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *Value - POdtOff value
+ *
+ * @return TRUE
+ */
+
+BOOLEAN
+MemNAdjustHwRcvEnSeedGrossKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Value
+ )
+{
+ UINT16 SeedGross;
+ UINT32 MemClkSpeed;
+
+ // Program D18F2x9C_x0000_00[2A:10]_dct[0]_mp[1:0][DqsRcvEnGrossDelay] = IF ((NBCOF / DdrRate
+ // < 1) && (D18F2x200_dct[0]_mp[1:0][Tcl]=5) && (SeedGross<1) THEN 1 ELSE SeedGross ENDIF.
+ MemClkSpeed = NBPtr->DCTPtr->Timings.Speed;
+ SeedGross = *(UINT16 *)Value;
+ if (NBPtr->NBClkFreq < (UINT32) (MemClkSpeed * 2) && MemNGetBitFieldNb (NBPtr, BFTcl) == 5 && SeedGross < 1) {
+ SeedGross = 1;
+ }
+ *(UINT16 *)Value = SeedGross;
+
+ return TRUE;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function calculates the value of WrDqDqsEarly and programs it into
+ * the DCT and adds it to the WrDqsGrossDelay of each byte lane on each
+ * DIMM of the channel.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNCalcWrDqDqsEarlyKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ DCT_STRUCT *DCTPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+ UINT8 Dimm;
+ UINT8 ByteLane;
+ UINT8 *WrDqsDlysPtr;
+ UINT8 WrDqDqsEarly;
+ UINT8 ChipSel;
+
+ ASSERT ((NBPtr->IsSupported[WLSeedAdjust]) && (NBPtr->IsSupported[WLNegativeDelay]));
+
+ TechPtr = NBPtr->TechPtr;
+ ChannelPtr = NBPtr->ChannelPtr;
+ DCTPtr = NBPtr->DCTPtr;
+
+ ASSERT (NBPtr != NULL);
+ ASSERT (ChannelPtr != NULL);
+ ASSERT (DCTPtr != NULL);
+ //
+ // For each DIMM:
+ // - The Critical Gross Delay (CGD) is the minimum GrossDly of all byte lanes and all DIMMs.
+ // - If (CGD < 0) Then
+ // - D18F2xA8_dct[1:0][WrDqDqsEarly] = ABS(CGD)
+ // - WrDqsGrossDly = GrossDly + WrDqDqsEarly
+ // - Else
+ // - D18F2xA8_dct[1:0][WrDqDqsEarly] = 1.
+ // - WrDqsGrossDly = GrossDly + 1
+ //
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCalculating WrDqDqsEarly, adjusting WrDqs.\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMin. Critical Delay: %x\n", TechPtr->WLCriticalDelay);
+
+ if (TechPtr->WLCriticalDelay < 0) {
+ // We've saved the entire negative delay value, so take the ABS and convert to GrossDly.
+ WrDqDqsEarly = (UINT8) (0x00FF &((((ABS (TechPtr->WLCriticalDelay)) + 0x1F) / 0x20)));
+ } else {
+ WrDqDqsEarly = 1;
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tWrDqDqsEarly : %02x\n\n", WrDqDqsEarly);
+ //
+ // Loop through All WrDqsDlys on all DIMMs
+ //
+ for (ChipSel = 0; ChipSel < NBPtr->CsPerChannel; ChipSel = ChipSel + NBPtr->CsPerDelay) {
+ if ((NBPtr->MCTPtr->Status[SbLrdimms]) ? ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0) :
+ ((DCTPtr->Timings.CsEnabled & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSel)) != 0)) {
+ //
+ // If LRDIMMs, only include the physical dimms, not logical Dimms
+ //
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS %x:", ChipSel);
+ Dimm = ChipSel / NBPtr->CsPerDelay;
+
+ WrDqsDlysPtr = &(ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ())]);
+ for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ WrDqsDlysPtr[ByteLane] += (WrDqDqsEarly << 5);
+ NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqsDlysPtr[ByteLane]);
+ IDS_HDT_CONSOLE (MEM_FLOW, " %02x", WrDqsDlysPtr[ByteLane]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ }
+ }
+
+ MemNSetBitFieldNb (NBPtr, BFWrDqDqsEarly, WrDqDqsEarly);
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets phy power saving related settings in different MPstate context.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return none
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNPhyPowerSavingMPstateKB (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ STATIC UINT8 RxSequence[] = {8, 4, 3, 5, 2, 6, 1, 7, 0};
+ STATIC UINT8 TxSequence[] = {0, 7, 1, 6, 2, 5, 3, 4, 8};
+ UINT16 DllPower[9];
+ UINT8 NumLanes;
+ UINT8 DllWakeTime;
+ UINT8 MaxRxStggrDly;
+ UINT8 MinRcvEnGrossDly;
+ UINT8 MinWrDqsGrossDly;
+ UINT8 dRxStggrDly;
+ UINT8 dTxStggrDly;
+ UINT8 TempStggrDly;
+ UINT8 MaxTxStggrDly;
+ UINT8 Tcl;
+ UINT8 Tcwl;
+ UINT8 WrDqDqsEarly;
+ UINT8 i;
+ UINT8 j;
+
+ // 3. Program D18F2x9C_x0D0F_0[F,8:0]30_dct[0][PwrDn] to disable the ECC lane if
+ // D18F2x90_dct[0][DimmEccEn]==0.
+ if (NBPtr->IsSupported[CheckEccDLLPwrDnConfig]) {
+ if (!NBPtr->MCTPtr->Status[SbEccDimms]) {
+ MemNSetBitFieldNb (NBPtr, BFEccDLLPwrDnConf, 0x0010);
+ }
+ }
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "Start Phy power saving setting for memory Pstate %d\n", NBPtr->MemPstate);
+ // 4. Program D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][DllDisEarlyU] = 1b.
+ // 5. Program D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][DllDisEarlyL] = 1b.
+ // 6. D18F2x9C_x0D0F_0[F,7:0][53,13]_dct[1:0][RxDqsUDllPowerDown] = 1.
+ MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F13, MemNGetBitFieldNb (NBPtr, BFPhy0x0D0F0F13) | 0x83);
+ // 7. D18F2x9C_x0D0F_812F_dct[1:0][PARTri] = ~D18F2x90_dct[1:0][ParEn].
+ // 8. D18F2x9C_x0D0F_812F_dct[1:0][Add17Tri, Add16Tri] = {1b, 1b}
+ if (NBPtr->MemPstate == MEMORY_PSTATE0) {
+ MemNSetBitFieldNb (NBPtr, BFAddrCmdTri, MemNGetBitFieldNb (NBPtr, BFAddrCmdTri) | 0xA1);
+ }
+ // 9. IF (DimmsPopulated == 1)&& ((D18F2x9C_x0000_0000_dct[1:0]_mp[1:0][CkeDrvStren]==010b) ||
+ // (D18F2x9C_x0000_0000_dct[1:0]_mp[1:0][CkeDrvStren]==011b)) THEN THEN
+ // program D18F2x9C_x0D0F_C0[40,00]_dct[1:0][LowPowerDrvStrengthEn] = 1
+ // ELSE program D18F2x9C_x0D0F_C0[40,00]_dct[1:0][LowPowerDrvStrengthEn] = 0 ENDIF.
+ if ((NBPtr->ChannelPtr->Dimms == 1) && ((MemNGetBitFieldNb (NBPtr, BFCkeDrvStren) == 2) || (MemNGetBitFieldNb (NBPtr, BFCkeDrvStren) == 3))) {
+ MemNSetBitFieldNb (NBPtr, BFLowPowerDrvStrengthEn, 0x100);
+ }
+ // 11. Program D18F2x9C_x0D0F_0[F,7:0][50,10]_dct[1:0][EnRxPadStandby] = IF
+ // (D18F2x94_dct[1:0][MemClkFreq] <= 800 MHz) THEN 1 ELSE 0 ENDIF.
+ MemNSetBitFieldNb (NBPtr, BFEnRxPadStandby, (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) ? 0x1000 : 0);
+ // 12. Program D18F2x9C_x0000_000D_dct[1:0]_mp[1:0] as follows:
+ // If (DDR rate < = 1600) TxMaxDurDllNoLock = RxMaxDurDllNoLock = 8h
+ // else TxMaxDurDllNoLock = RxMaxDurDllNoLock = 7h.
+ if (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) {
+ MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 8);
+ MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 8);
+ } else {
+ MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 7);
+ MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 7);
+ }
+
+ // TxCPUpdPeriod = RxCPUpdPeriod = 011b.
+ MemNSetBitFieldNb (NBPtr, BFRxCPUpdPeriod, 3);
+ MemNSetBitFieldNb (NBPtr, BFTxCPUpdPeriod, 3);
+ // TxDLLWakeupTime = RxDLLWakeupTime = 11b.
+ MemNSetBitFieldNb (NBPtr, BFRxDLLWakeupTime, 3);
+ MemNSetBitFieldNb (NBPtr, BFTxDLLWakeupTime, 3);
+
+ IDS_SKIP_HOOK (IDS_DLLSTAGGERDLY_OVERRIDE, NULL, &(NBPtr->MemPtr->StdHeader)) {
+ // 12. Program D18F2x9C_x0D0F_0[F,7:0][5C,1C]_dct[1:0] as follows.
+ // Let Numlanes = 8. = 9 with ECC.
+ NumLanes = (NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8;
+ // RxDllStggrEn = TxDllStggrEn = 1.
+ for (i = 0; i < 9; i ++) {
+ DllPower[i] = 0x8080;
+ }
+ // 13. If (DDR rate > = 1866) DllWakeTime = 1, Else DllWakeTime = 0.
+ DllWakeTime = (NBPtr->DCTPtr->Timings.Speed >= DDR1866_FREQUENCY) ? 1 : 0;
+ // Let MaxRxStggrDly = ((Tcl-1)*2) + MIN(DqsRcvEnGrossDelay for all byte lanes (see D18F2x9C_x0000_00[2A:10]_dct[1:0]_mp[1:0])) - 6.
+ MinRcvEnGrossDly = NBPtr->TechPtr->GetMinMaxGrossDly (NBPtr->TechPtr, AccessRcvEnDly, FALSE);
+ Tcl = (UINT8) MemNGetBitFieldNb (NBPtr, BFTcl);
+ ASSERT (Tcl >= 1);
+ ASSERT (((Tcl - 1) * 2 + MinRcvEnGrossDly) >= 6);
+ MaxRxStggrDly = (Tcl - 1) * 2 + MinRcvEnGrossDly - 6;
+ // Let (real) dRxStggrDly = (MaxRxStggrDly - DllWakeTime) / (Numlanes - 1).
+ ASSERT (MaxRxStggrDly >= DllWakeTime);
+ dRxStggrDly = (MaxRxStggrDly - DllWakeTime) / (NumLanes - 1);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tMinimum RcvEnGrossDly: 0x%02x MaxRxStggrDly: 0x%02x dRxStggrDly: 0x%02x\n", MinRcvEnGrossDly, MaxRxStggrDly, dRxStggrDly);
+ // For each byte lane in the ordered sequence {8, 4, 3, 5, 2, 6, 1, 7, 0}, program RxDllStggrDly[5:0] = an
+ // increasing value, starting with 0 for the first byte lane in the sequence and increasing at a rate of dRxStggrDly
+ // for each subsequent byte lane. Convert the real to integer by rounding down or using C (int) typecast after linearization.
+
+ for (i = 9 - NumLanes, j = 0; i < 9; i ++, j ++) {
+ TempStggrDly = ((MaxRxStggrDly - DllWakeTime) * j + NumLanes - 2) / (NumLanes - 1);
+ DllPower[RxSequence[i]] |= ((TempStggrDly & 0x3F) << 8);
+ }
+
+ // Let MaxTxStggrDly = MIN(((Tcwl-1)*2) + MIN(WrDqsGrossDly for all byte lanes) - WrDqDqsEarly -
+ // 4, MaxRxStggrDly)
+ Tcwl = (UINT8) MemNGetBitFieldNb (NBPtr, BFTcwl);
+ WrDqDqsEarly = (UINT8) MemNGetBitFieldNb (NBPtr, BFWrDqDqsEarly);
+ MinWrDqsGrossDly = NBPtr->TechPtr->GetMinMaxGrossDly (NBPtr->TechPtr, AccessWrDqsDly, FALSE);
+ ASSERT (Tcwl >= 1);
+ ASSERT ((Tcwl - 1) * 2 + MinWrDqsGrossDly - WrDqDqsEarly >= 4);
+ MaxTxStggrDly = MIN ((Tcwl - 1) * 2 + MinWrDqsGrossDly - WrDqDqsEarly - 4, MaxRxStggrDly);
+ // Let dTxStggrDly = (MaxTxStggrDly - DllWakeTime) / (Numlanes - 1).
+ ASSERT (MaxTxStggrDly >= DllWakeTime);
+ dTxStggrDly = (MaxTxStggrDly - DllWakeTime) / (NumLanes - 1);
+ // For each byte lane in the ordered sequence {8, 4, 3, 5, 2, 6, 1, 7, 0}, program TxDllStggrDly[5:0] = an
+ // increasing integer value, starting with 0 for the first byte lane in the sequence and increasing at a rate of
+ // dTxStggrDly for each subsequent byte lane.
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tMinimum WrDqsGrossDly: 0x%02x MaxTxStggrDly: 0x%02x dTxStggrDly: 0x%02x\n", MinWrDqsGrossDly, MaxTxStggrDly, dTxStggrDly);
+
+ for (i = 0, j = 0; i < NumLanes; i ++, j ++) {
+ TempStggrDly = ((MaxTxStggrDly - DllWakeTime) * j + NumLanes - 2) / (NumLanes - 1);
+ DllPower[TxSequence[i]] |= (TempStggrDly & 0x3F);
+ }
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tByte Lane : ECC 07 06 05 04 03 02 01 00\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tDll Power : %04x %04x %04x %04x %04x %04x %04x %04x %04x\n",
+ DllPower[8], DllPower[7], DllPower[6], DllPower[5], DllPower[4], DllPower[3], DllPower[2], DllPower[1], DllPower[0]);
+
+ for (i = 0; i < NumLanes; i ++) {
+ MemNSetBitFieldNb (NBPtr, BFDataByteDllPowerMgnByte0 + i, (MemNGetBitFieldNb (NBPtr, BFDataByteDllPowerMgnByte0 + i) & 0x4040) | DllPower[i]);
+ }
+ }
+
+ // 14. For M0 & M1 context program RxChMntClkEn=RxSsbMntClkEn=0.
+ MemNSetBitFieldNb (NBPtr, BFRxChMntClkEn, 0);
+ MemNSetBitFieldNb (NBPtr, BFRxSsbMntClkEn, 0);
+
+ // 15. Program D18F2x9C_x0D0F_0[F,8:0]30_dct[0][TxPclkGateEn,PchgPdPClkGateEn,DataCtlPipePclkGateEn] = {1, 1, 1}
+ MemNSetBitFieldNb (NBPtr, BFTxPclkGateEn, 1 << 9);
+ MemNSetBitFieldNb (NBPtr, BFPchgPdPclkGateEn, 1 << 7);
+ MemNSetBitFieldNb (NBPtr, BFDataCtlPipePclkGateEn, 1 << 6);
+
+ IDS_OPTION_HOOK (IDS_PHY_DLL_STANDBY_CTRL, NBPtr, &NBPtr->MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs Vref according to platform requirements
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ */
+BOOLEAN
+MemNPhyInitVrefKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ MemNBrdcstSetNb (NBPtr, BFVrefSel, (NBPtr->RefPtr->ExternalVrefCtl ? 0x0002 : 0x0001));
+
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnregkb.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnregkb.c
new file mode 100644
index 0000000..724af40
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mnregkb.c
@@ -0,0 +1,847 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnregkb.c
+ *
+ * Common Northbridge register related functions for KB
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/KB)
+ * @e \$Revision: 87696 $ @e \$Date: 2013-02-07 12:35:03 -0600 (Thu, 07 Feb 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Gnb.h"
+#include "GnbPcie.h"
+#include "GnbCommonLib.h"
+#include "GnbRegistersKB.h"
+#include "GnbRegisterAccKB.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mnkb.h"
+#include "merrhdl.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+#define FILECODE PROC_MEM_NB_KB_MNREGKB_FILECODE
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define PHY_DIRECT_ADDRESS_MASK 0x0D000000ul
+
+STATIC CONST UINT8 InstancesPerTypeKB[8] = {9, 3, 1, 2, 2, 0, 1, 1};
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------*/
+/**
+ * MemNIsIdSupportedKB
+ * This function matches the CPU_LOGICAL_ID with certain criteria to
+ * determine if it is supported by this NBBlock.
+ *
+ * @param[in] *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID
+ *
+ * @return TRUE - This node is a KB.
+ * @return FALSE - This node is not a KB.
+ *
+ */
+BOOLEAN
+MemNIsIdSupportedKB (
+ IN CPU_LOGICAL_ID *LogicalIdPtr
+ )
+{
+ if (((LogicalIdPtr->Family & AMD_FAMILY_16_KB) != 0)
+ && ((LogicalIdPtr->Revision & AMD_F16_ALL) != 0)) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets or sets a value to a bit field in a PCI register.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] FieldName - Bit Field to be programmed
+ * @param[in] Field - Value to be programmed
+ * @param[in] IsSet - Indicates if the function will set or get
+ *
+ * @return value read, if the function is used as a "get"
+ */
+
+UINT32
+MemNCmnGetSetFieldKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 IsSet,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field
+ )
+{
+ TSEFO Address;
+ PCI_ADDR PciAddr;
+ UINT8 Type;
+ UINT8 IsLinked;
+ UINT32 Value;
+ UINT32 Highbit;
+ UINT32 Lowbit;
+ UINT32 Mask;
+ UINT8 IsPhyDirectAccess;
+ UINT8 IsWholeRegAccess;
+ UINT8 NumOfInstances;
+ UINT8 Instance;
+ UINT8 IsMultipleMPstate;
+
+ Value = 0;
+ if (FieldName == BFDctAccessDone) {
+ // No need to poll DctAccessDone for KB due to enhancement in phy
+ Value = 1;
+ } else if ((FieldName < BFEndOfList) && (FieldName >= 0)) {
+ Address = NBPtr->NBRegTable[FieldName];
+ if (Address) {
+ Lowbit = TSEFO_END (Address);
+ Highbit = TSEFO_START (Address);
+ Type = (UINT8) TSEFO_TYPE (Address);
+ IsLinked = (UINT8) TSEFO_LINKED (Address);
+ IsPhyDirectAccess = (UINT8) TSEFO_DIRECT_EN (Address);
+ IsWholeRegAccess = (UINT8) TSEFO_WHOLE_REG_ACCESS (Address);
+ if (NBPtr->MemPstate == MEMORY_PSTATE0) {
+ IsMultipleMPstate = TSEFO_MULTI_MPSTATE_COPY (Address);
+ } else {
+ // Do not write in both instances when context is already in MP1
+ IsMultipleMPstate = 0;
+ }
+
+ Address = TSEFO_OFFSET (Address);
+
+ // By default, a bit field has only one instance
+ NumOfInstances = 1;
+
+ if ((Type == DCT_PHY_ACCESS) && IsPhyDirectAccess) {
+ Address |= PHY_DIRECT_ADDRESS_MASK;
+ if (IsWholeRegAccess) {
+ // In the case of whole register access (bit 0 to 15),
+ // HW broadcast and nibble mask will be used.
+ Address |= Lowbit << 16;
+ Lowbit = 0;
+ Highbit = 15;
+ } else {
+ // In the case only some bits on a register is accessed,
+ // BIOS will do read-mod-write to all chiplets manually.
+ // And nibble mask will be 1111b always.
+ if ((Address & 0xFFFF) == 0xE008) {
+ // Special case for PStateToAccess, which use nibble mask
+ Address |= 0x00040000;
+ } else {
+ Address |= 0x000F0000;
+ }
+ Field >>= Lowbit;
+ if ((Address & 0x0F00) == 0x0F00) {
+ // Broadcast mode
+ // Find out how many instances to write to
+ NumOfInstances = InstancesPerTypeKB[(Address >> 13) & 0x7];
+ if (!IsSet) {
+ // For read, only read from instance 0 in broadcast mode
+ NumOfInstances = 1;
+ }
+ }
+ }
+ }
+
+ ASSERT (NumOfInstances > 0);
+
+ for (Instance = 0; Instance < NumOfInstances; Instance++) {
+ if (Type == NB_ACCESS) {
+ PciAddr.AddressValue = Address;
+ PciAddr.Address.Device = NBPtr->PciAddr.Address.Device;
+ PciAddr.Address.Bus = NBPtr->PciAddr.Address.Bus;
+ PciAddr.Address.Segment = NBPtr->PciAddr.Address.Segment;
+ Address = PciAddr.AddressValue;
+ LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+ if ((FieldName != BFDctAddlDataReg) && (FieldName != BFDctAddlOffsetReg) && (FieldName != BFDctCfgSel)) {
+ IDS_HDT_CONSOLE (MEM_GETREG, "~Dev%x Dct%d Fn%d_%03x = %x\n",
+ NBPtr->PciAddr.Address.Device, NBPtr->Dct,
+ (Address >> 12) & 0xF, Address & 0xFFF, Value);
+ }
+ } else if (Type == DCT_PHY_ACCESS) {
+ if (IsPhyDirectAccess && (NumOfInstances > 1)) {
+ Address = (Address & 0x0FFFF0FF) | (((UINT32) Instance) << 8);
+ }
+ MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+ Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+ IDS_HDT_CONSOLE (MEM_GETREG, "~Dev%x Dct%d Fn2_9C_%x = %x\n", NBPtr->PciAddr.Address.Device, NBPtr->Dct, Address & 0x0FFFFFFF, Value);
+ } else {
+ // DCT_EXTRA_ACCESS is not supported on KB
+ ASSERT (FALSE);
+ }
+
+ if (IsSet) {
+ // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+ if ((Highbit - Lowbit) != 31) {
+ Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+ } else {
+ Mask = (UINT32)0xFFFFFFFF;
+ }
+ Value &= ~(Mask << Lowbit);
+ Value |= (Field & Mask) << Lowbit;
+
+ do {
+ if (Type == NB_ACCESS) {
+ PciAddr.AddressValue = Address;
+ LibAmdPciWrite (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader);
+ if ((FieldName != BFDctAddlDataReg) && (FieldName != BFDctAddlOffsetReg) && (FieldName != BFDctCfgSel)) {
+ IDS_HDT_CONSOLE (MEM_SETREG, "~Dev%x Dct%d Fn%d_%03x [%d:%d] = %x\n",
+ NBPtr->PciAddr.Address.Device, NBPtr->Dct,
+ (Address >> 12) & 0xF, Address & 0xFFF, Highbit, Lowbit, Field);
+ }
+ } else if (Type == DCT_PHY_ACCESS) {
+ ASSERT (!NBPtr->IsSupported[ScrubberEn]); // Phy CSR write is not allowed after scrubber is enabled
+ MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+ Address |= DCT_ACCESS_WRITE;
+ MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+ IDS_HDT_CONSOLE (MEM_SETREG, "~Dev%x Dct%d Fn2_9C_%x [%d:%d] = %x\n",
+ NBPtr->PciAddr.Address.Device, NBPtr->Dct,
+ Address & 0x0FFFFFFF, Highbit, Lowbit, Field);
+ } else {
+ // DCT_EXTRA_ACCESS is not supported on KB
+ ASSERT (FALSE);
+ }
+ if (IsLinked) {
+ MemNCmnGetSetFieldKB (NBPtr, 1, FieldName + 1, Field >> (Highbit - Lowbit + 1));
+ }
+ if (IsMultipleMPstate && (NBPtr->MemPstateStage == MEMORY_PSTATE_1ST_STAGE)) {
+ // if there are multiple Pstate register copies, program register in M1 context when the frequency is DDR667
+ if (NBPtr->MemPstate == MEMORY_PSTATE0) {
+ MemNChangeMemPStateContextNb (NBPtr, 1);
+ } else {
+ // Switch back to M0 context
+ MemNChangeMemPStateContextNb (NBPtr, 0);
+ }
+ }
+ } while ((NBPtr->MemPstate == MEMORY_PSTATE1) && IsMultipleMPstate && (NBPtr->MemPstateStage == MEMORY_PSTATE_1ST_STAGE));
+ } else {
+ Value = Value >> Lowbit; // Shift
+ // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case
+ if ((Highbit - Lowbit) != 31) {
+ Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1);
+ }
+ if (IsLinked) {
+ Value |= MemNCmnGetSetFieldKB (NBPtr, 0, FieldName + 1, 0) << (Highbit - Lowbit + 1);
+ }
+ // For direct phy access, shift the bit back for compatibility reason.
+ if ((Type == DCT_PHY_ACCESS) && IsPhyDirectAccess) {
+ Value <<= Lowbit;
+ }
+ }
+ }
+ } else {
+ IDS_HDT_CONSOLE (MEM_UNDEF_BF, "\t\tUndefined BF enum: %x\n", FieldName);
+ }
+ } else {
+ ASSERT (FALSE); // Invalid bit field index
+ }
+ return Value;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes bit field translation table
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] NBRegTable[] - Pointer to the bit field data structure
+ *
+ */
+
+VOID
+MemNInitNBRegTableKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT TSEFO NBRegTable[]
+ )
+{
+ UINT16 i;
+
+ // Allocate heap for NB register table
+ if (!MemNAllocateNBRegTableNb (NBPtr, NbRegTabKB)) {
+ return; // escape if fails
+ }
+ NBRegTable = NBPtr->NBRegTable;
+
+ for (i = 0; i < BFEndOfList; i++) {
+ NBRegTable[i] = 0;
+ }
+
+ // ---------------------------------------------------------------------------
+ //
+ // FUNCTION 1
+ //
+ // ---------------------------------------------------------------------------
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 31, 0, BFDramHoleAddrReg);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 31, 24, BFDramHoleBase);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 15, 7, BFDramHoleOffset);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 1, 1, BFDramMemHoistValid);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0xF0), 0, 0, BFDramHoleValid);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x10C), 5, 4, BFNbPsSel);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x10C), 3, 3, BFMemPsSel);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x10C), 2, 0, BFDctCfgSel);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x120), 20, 0, BFDramBaseAddr);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x124), 20, 0, BFDramLimitAddr);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x200), 31, 0, BFDramCtrlBaseReg0);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x200), 1, 1, BFLgcyMmioHoleEn0);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x204), 31, 0, BFDramCtrlLimitReg0);
+ // ---------------------------------------------------------------------------
+ //
+ // FUNCTION 2
+ //
+ // ---------------------------------------------------------------------------
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31, 0, BFCSBaseAddr0Reg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31, 0, BFCSBaseAddr1Reg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31, 0, BFCSBaseAddr2Reg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31, 0, BFCSBaseAddr3Reg);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31, 0, BFCSMask0Reg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31, 0, BFCSMask1Reg);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 17, 17, BFAddrCmdTriEn);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 0, BFDramInitRegReg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 23, 21, BFMrsChipSel);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 20, 18, BFMrsBank);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 17, 0, BFMrsAddress);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 7, 0, BFDramBankAddrReg);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31, 0, BFDramMRSReg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 23, 23, BFPchgPDModeSel);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 1, 0, BFBurstCtrl);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 29, 24, BFMemClkDis);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 17, 16, BFTref);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 27, 27, BFDisDllShutdownSR);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 25, 25, BFPendRefPaybackS3En);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 24, 24, BFStagRefEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 23, 23, BFForceAutoPchg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 20, 20, BFDynPageCloseEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 19, 19, BFDimmEccEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 17, 17, BFEnterSelfRef);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 16, 16, BFUnBuffDimm);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 1, 1, BFExitSelfRef);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31, 0, BFDramConfigHiReg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31, 31, BFDphyMemPsSelEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 28, 24, BFDcqBypassMax);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 22, 22, BFBankSwizzleMode);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 21, 21, BFFreqChgInProg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 20, 20, BFSlowAccessMode);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 16, 16, BFPowerDownMode);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 15, 15, BFPowerDownEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 7, 7, BFMemClkFreqVal);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 4, 0, BFMemClkFreq);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 0, BFDctAddlOffsetReg);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31, 0, BFDctAddlDataReg);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4), 14, 12, BFCmdThrottleMode);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4), 11, 11, BFBwCapEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA4), 8, 8, BFODTSEn);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 31, 31, BFPerRankTimingEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 28, 28, BFFastSelfRefEntryDis);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 22, 22, BFPrtlChPDEnhEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 21, 21, BFAggrPDEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 20, 20, BFBankSwap);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 17, 16, BFMemPhyPllPdMode);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 10, 10, BFMemCleared);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 9, 9, BFMemClrBusy);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 8, 8, BFDramEnabled);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 5, 5, BFDctDatIntLv);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 3, 3, BFMemClrInit);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 9, 9, BFDctSelBankSwap);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x118), 19, 19, BFLockDramCfg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x118), 18, 18, BFCC6SaveEn);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 31, 0, BFMctCfgHiReg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 13, 13, BFPrefIoDis);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x120), 23, 16, BFTrcBufAdrPtrHi);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x120), 15, 8, BFTrcBufDramLimitHi);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x120), 7, 0, BFTrcBufDramBaseHi);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B0), 31, 0, BFExtMctCfgLoReg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B4), 31, 0, BFExtMctCfgHiReg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B4), 27, 27, BFFlushWrOnS3StpGnt);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1B4), 26, 26, BFEnSplitMctDatBuffers);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1BC), 31, 0, BFCSMapCKE);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x200), 29, 24, BFTras);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x200), 20, 16, BFTrp);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x200), 12, 8, BFTrcd);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x200), 4, 0, BFTcl);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x204), 27, 24, BFTrtp);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x204), 21, 16, BFFourActWindow);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x204), 11, 8, BFTrrd);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x204), 5, 0, BFTrc);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x208), 26, 24, BFTrfc3);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x208), 18, 16, BFTrfc2);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x208), 10, 8, BFTrfc1);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x208), 2, 0, BFTrfc0);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x20C), 17, 16, BFWrDqDqsEarly);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x20C), 11, 8, BFTwtr);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x20C), 4, 0, BFTcwl);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x210), 31, 22, BFMaxLatency);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x210), 18, 16, BFDataTxFifoWrDly);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x210), 3, 0, BFRdPtrInit);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x214), 19, 16, BFTwrwrSdSc);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x214), 11, 8, BFTwrwrSdDc);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x214), 3, 0, BFTwrwrDd);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x218), 27, 24, BFTrdrdSdSc);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x218), 19, 16, BFTrdrdSdDc);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x218), 11, 8, BFTwrrd);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x218), 3, 0, BFTrdrdDd);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x21C), 20, 16, BFTrwtWB);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x21C), 12, 8, BFTrwtTO);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x220), 12, 8, BFTmod);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x220), 3, 0, BFTmrd);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x224), 10, 8, BFTzqcs);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x224), 3, 0, BFTzqoper);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x228), 31, 24, BFTstag3);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x228), 23, 16, BFTstag2);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x228), 15, 8, BFTstag1);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x228), 7, 0, BFTstag0);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x22C), 4, 0, BFTwrDDR3);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x230), 31, 0, BFPhyRODTCSLow);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x234), 31, 0, BFPhyRODTCSHigh);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x238), 31, 0, BFPhyWODTCSLow);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x23C), 31, 0, BFPhyWODTCSHigh);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x240), 14, 12, BFWrOdtOnDuration);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x240), 10, 8, BFWrOdtTrnOnDly);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x240), 7, 4, BFRdOdtOnDuration);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x240), 3, 0, BFRdOdtTrnOnDly);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x244), 3, 0, BFPrtlChPDDynDly);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x248), 31, 31, BFRxChMntClkEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x248), 29, 24, BFAggrPDDelay);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x248), 21, 16, BFPchgPDEnDelay);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x248), 12, 8, BFTxpdll);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x248), 3, 0, BFTxp);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x24C), 29, 24, BFTcksrx);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x24C), 21, 16, BFTcksre);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x24C), 13, 8, BFTckesr);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x24C), 3, 0, BFTpd);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x24C), 31, 0, BFDramPwrMngm1Reg);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 20, 18, BFDataPatGenSel);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 12, 12, BFCmdSendInProg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 11, 11, BFSendCmd);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 10, 10, BFTestStatus);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 9, 8, BFCmdTgt);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 7, 5, BFCmdType);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 4, 4, BFStopOnErr);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 3, 3, BFResetAllErr);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 2, 2, BFCmdTestEnable);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x250), 13, 13, BFLfsrRollOver );
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x254), 26, 24, BFTgtChipSelectA);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x254), 23, 21, BFTgtBankA);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x254), 9, 0, BFTgtAddressA);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x258), 26, 24, BFTgtChipSelectB);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x258), 23, 21, BFTgtBankB);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x258), 9, 0, BFTgtAddressB);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x25C), 31, 22, BFBubbleCnt2);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x25C), 21, 12, BFBubbleCnt);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x25C), 7, 0, BFCmdStreamLen);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x260), 20, 0, BFCmdCount);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x268), 17, 0, BFNibbleErrSts);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x26C), 17, 0, BFNibbleErr180Sts);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x270), 18, 0, BFDataPrbsSeed);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x274), 31, 0, BFDramDqMaskLow );
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x278), 31, 0, BFDramDqMaskHigh);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x27C), 7, 0, BFDramEccMask );
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x288), 31, 24, BFXorPatOvr);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x28C), 31, 31, BFSendActCmd);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x28C), 30, 30, BFSendPchgCmd);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x28C), 29, 22, BFCmdChipSelect);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x28C), 21, 19, BFCmdBank);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x28C), 17, 0, BFCmdAddress);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x294), 31, 0, BFDQErrLow);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x298), 31, 0, BFDQErrHigh);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x29C), 7, 0, BFEccErr );
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x2A8), 31, 0, BFDramUserDataPattern0);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x2AC), 31, 0, BFDramUserDataPattern1);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x2B0), 31, 0, BFDramUserDataPattern2);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x2B4), 31, 0, BFDramUserDataPattern3);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x2E0), 30, 30, BFFastMstateDis);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x2E0), 28, 24, BFM1MemClkFreq);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x2E0), 22, 20, BFMxMrsEn);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x2E8), 31, 16, BFMxMr1);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x2E8), 15, 0, BFMxMr0);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x2EC), 15, 0, BFMxMr2);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x2F0), 0, 0, BFEffArbDis);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x400), 11, 8, BFGmcTokenLimit);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x400), 3, 0, BFMctTokenLimit);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x404), 31, 0, BFGmcToDctControl1);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x408), 28, 24, BFCpuElevPrioPeriod);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x408), 0, 0, BFCpuElevPrioDis);
+
+ // ---------------------------------------------------------------------------
+ //
+ // DCT PHY REGISTERS
+ //
+ // ---------------------------------------------------------------------------
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31, 0, BFODCControl);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 22, 20, BFDqsDrvStren);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 18, 16, BFDataDrvStren);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 14, 12, BFClkDrvStren);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 10, 8, BFAddrCmdDrvStren);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 6, 4, BFCsOdtDrvStren);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 2, 0, BFCkeDrvStren);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31, 0, BFAddrTmgControl);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 30, 29, BFDisablePredriverCal);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 13, 13, BFDqsRcvTrEn);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11, 8, BFWrLvOdt);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 7, 6, BFFenceTrSel);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 5, 4, BFTrDimmSel);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 3, 3, BFPhyFenceTrEn);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 2, 2, BFTrNibbleSel);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 0, 0, BFWrtLvTrEn);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0B, 31, 0, BFDramPhyStatusReg);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0C, 20, 16, BFPhyFence);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0C, 15, 12, BFCKETri);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0C, 11, 8, BFODTTri);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0C, 7, 0, BFChipSelTri);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D, 25, 24, BFRxDLLWakeupTime);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D, 22, 20, BFRxCPUpdPeriod);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D, 19, 16, BFRxMaxDurDllNoLock);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D, 9, 8, BFTxDLLWakeupTime);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D, 6, 4, BFTxCPUpdPeriod);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0D, 3, 0, BFTxMaxDurDllNoLock);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x50, 31, 0, BFRstRcvFifo);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F13, 8, 8, BFRxSsbMntClkEn);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F13, 14, 14, BFProcOdtAdv);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F13, 7, 0, BFPhy0x0D0F0F13);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0830, 4, 4, BFEccDLLPwrDnConf);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F30, 6, 6, BFDataCtlPipePclkGateEn);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F30, 7, 7, BFPchgPdPclkGateEn);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F30, 9, 9, BFTxPclkGateEn);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE013, 15, 0, BFPllRegWaitTime);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE006, 15, 0, BFPllLockTime);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F02, 15, 0, BFDataByteTxPreDriverCal);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F04, 12, 12, BFPOdtOff);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F06, 15, 0, BFDataByteTxPreDriverCal2Pad1);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F0A, 15, 0, BFDataByteTxPreDriverCal2Pad2);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8006, 15, 0, BFCmdAddr0TxPreDriverCal2Pad1);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F800A, 15, 0, BFCmdAddr0TxPreDriverCal2Pad2);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8106, 15, 0, BFCmdAddr1TxPreDriverCal2Pad1);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F810A, 15, 0, BFCmdAddr1TxPreDriverCal2Pad2);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC006, 15, 0, BFAddrTxPreDriverCal2Pad1);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC00A, 15, 0, BFAddrTxPreDriverCal2Pad2);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC00E, 15, 0, BFAddrTxPreDriverCal2Pad3);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC012, 15, 0, BFAddrTxPreDriverCal2Pad4);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8002, 15, 0, BFCmdAddr0TxPreDriverCalPad0);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8102, 15, 0, BFCmdAddr1TxPreDriverCalPad0);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC002, 15, 0, BFAddrTxPreDriverCalPad0);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2002, 15, 0, BFClock0TxPreDriverCalPad0);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2102, 15, 0, BFClock1TxPreDriverCalPad0);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4001, 15, 8, BFTxP);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4001, 7, 0, BFTxN);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F0B, 31, 0, BFPhy0x0D0F0F0B);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F07, 31, 0, BFPhy0x0D0F0F07);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F03, 31, 0, BFPhy0x0D0F0F03);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F812F, 15, 0, BFAddrCmdTri);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F10, 12, 12, BFEnRxPadStandby);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D04E008, 8, 8, BFPStateToAccess);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2030, 4, 4, BFPhyClkConfig0);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2130, 4, 4, BFPhyClkConfig1);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE040, 3, 0, BFRate);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F1E, 14, 12, BFDllCSRBiasTrim);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F1F, 4, 3, BFDataRxVioLvl);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F1F, 7, 5, BFRxDqInsDly);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2F1F, 4, 3, BFClkRxVioLvl);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4009, 3, 2, BFCsrComparator);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4009, 15, 14, BFCmpVioLvl);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8F1F, 4, 3, BFCmdRxVioLvl);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC01F, 4, 3, BFAddrRxVioLvl);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F31, 9, 0, BFDataFence2);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE019, 14, 0, BFFence2);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE01A, 15, 0, BFChAM1FenceSave);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F30, 8, 8, BFBlockRxDqsLock);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F001C, 15, 0, BFDataByteDllPowerMgnByte0);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F011C, 15, 0, BFDataByteDllPowerMgnByte1);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F021C, 15, 0, BFDataByteDllPowerMgnByte2);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F031C, 15, 0, BFDataByteDllPowerMgnByte3);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F041C, 15, 0, BFDataByteDllPowerMgnByte4);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F051C, 15, 0, BFDataByteDllPowerMgnByte5);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F061C, 15, 0, BFDataByteDllPowerMgnByte6);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F071C, 15, 0, BFDataByteDllPowerMgnByte7);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F081C, 15, 0, BFDataByteDllPowerMgnByte8);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F1C, 15, 0, BFDataByteDllPowerMgnByteAll);
+
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4006, 2, 0, BFObsrvVrefSel);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4007, 2, 0, BFVrefSel);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4007, 8, 3, BFVrefDAC);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F20, 15, 0, BFDataByteRxDqsDLLDimm0Broadcast);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F21, 15, 0, BFDataByteRxDqsDLLDimm1Broadcast);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F22, 15, 0, BFDataByteRxDqsDLLDimm2Broadcast);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F23, 15, 0, BFDataByteRxDqsDLLDimm3Broadcast);
+ MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F38, 14, 13, BFReducedLoop);
+
+ // ---------------------------------------------------------------------------
+ //
+ // FUNCTION 3
+ //
+ // ---------------------------------------------------------------------------
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x40), 31, 0, BFMcaNbCtlReg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x44), 22, 22, BFDramEccEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x44), 2, 2, BFSyncOnUcEccEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x180), 25, 25, BFEccSymbolSize);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x58), 4, 0, BFDramScrub);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x5C), 0, 0, BFScrubReDirEn);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x5C), 31, 0, BFScrubAddrLoReg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x60), 31, 0, BFScrubAddrHiReg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x88), 27, 27, BFDisDramScrub);
+
+ // ---------------------------------------------------------------------------
+ //
+ // FUNCTION 4
+ //
+ // ---------------------------------------------------------------------------
+
+ // ---------------------------------------------------------------------------
+ //
+ // FUNCTION 5
+ //
+ // ---------------------------------------------------------------------------
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x84), 20, 16, BFDdrMaxRate);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x160), 18, 18, BFMemPstate0);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x164), 18, 18, BFMemPstate1);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x168), 18, 18, BFMemPstate2);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x16C), 18, 18, BFMemPstate3);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x160), 16, 10, BFNbVid0);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x164), 16, 10, BFNbVid1);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x168), 16, 10, BFNbVid2);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x16C), 16, 10, BFNbVid3);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x160), 21, 21, BFNbVid0Hi);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x164), 21, 21, BFNbVid1Hi);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x168), 21, 21, BFNbVid2Hi);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x16C), 21, 21, BFNbVid3Hi);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x170), 31, 0, BFNbPstateCtlReg);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x170), 31, 31, BFMemPstateDis);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x170), 14, 14, BFSwNbPstateLoDis);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x170), 7, 6, BFNbPstateHi);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x170), 4, 3, BFNbPstateLo);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x170), 1, 0, BFNbPstateMaxVal);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x174), 24, 24, BFCurMemPstate);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x174), 20, 19, BFCurNbPstate);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x174), 0, 0, BFNbPstateDis);
+
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x188), 1, 0, BFNbOffsetTrim);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x240), 31, 0, BFECCExclusionBaseLow);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x244), 15, 0, BFECCExclusionBaseHigh);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x248), 31, 0, BFECCExclusionLimitLow);
+ MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (5, 0x24C), 15, 0, BFECCExclusionLimitHigh);
+
+ // ---------------------------------------------------------------------------
+ //
+ // LINK BITFIELD
+ //
+ // ---------------------------------------------------------------------------
+ LINK_TSEFO (NBRegTable, BFNbVid0, BFNbVid0Hi);
+ LINK_TSEFO (NBRegTable, BFNbVid1, BFNbVid1Hi);
+ LINK_TSEFO (NBRegTable, BFNbVid2, BFNbVid2Hi);
+ LINK_TSEFO (NBRegTable, BFNbVid3, BFNbVid3Hi);
+
+ // ---------------------------------------------------------------------------
+ //
+ // REGISTERS WITH MULTIPLE MEMORY PSTATE COPIES
+ //
+ // ---------------------------------------------------------------------------
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFODCControl);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFDqsDrvStren);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFDataDrvStren);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFClkDrvStren);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFAddrCmdDrvStren);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFCsOdtDrvStren);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFCkeDrvStren);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFAddrTmgControl);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFDisablePredriverCal);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFProcOdtAdv);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFPOdtOff);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFDllCSRBiasTrim);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFDataRxVioLvl);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFRxDqInsDly);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFTras);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFTrp);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFTrcd);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFTcl);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFTrtp);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFFourActWindow);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFTrrd);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFTrc);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFWrDqDqsEarly);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFTwtr);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFTcwl);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFTwrDDR3);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFWrOdtOnDuration);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFWrOdtTrnOnDly);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFRdOdtOnDuration);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFRdOdtTrnOnDly);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFMxMr0);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFMxMr1);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFMxMr2);
+ // These Phy fence registers don't have mutiple memory Pstate copies
+ // But they need to be written again in M1 context
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFDataFence2);
+ MULTI_MPSTATE_COPY_TSEFO (NBRegTable, BFFence2);
+
+ IDS_OPTION_HOOK (IDS_INIT_MEM_REG_TABLE, NBPtr, &NBPtr->MemPtr->StdHeader);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mns3kb.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mns3kb.c
new file mode 100644
index 0000000..7c433ad
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/KB/mns3kb.c
@@ -0,0 +1,1258 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mns3kb.c
+ *
+ * KB memory specific function to support S3 resume
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/KB)
+ * @e \$Revision: 87696 $ @e \$Date: 2013-02-07 12:35:03 -0600 (Thu, 07 Feb 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "mnkb.h"
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "mnS3kb.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_KB_MNS3KB_FILECODE
+#define DCT0_MEMPSTATE_MASK 0x10
+#define DCT1_MEMPSTATE_MASK 0x20
+#define DO_NOT_CARE 0
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT DESCRIPTOR_GROUP *DescriptPtr
+ );
+
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstKB (
+ IN UINT32 RegisterLstID,
+ OUT VOID **RegisterHeader
+ );
+
+VOID
+STATIC
+MemNS3SetDfltPhyRegKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+STATIC
+MemNS3SetDynModeChangeKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+STATIC
+MemNS3SetPhyStatusRegKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+STATIC
+MemNS3DisableChannelKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+STATIC
+MemNS3GetConPCIMaskKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT DESCRIPTOR_GROUP *DescriptPtr
+ );
+
+VOID
+STATIC
+MemNS3ChangeMemPStateContextAndFlowNb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+STATIC
+MemNS3GetCSRKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+STATIC
+MemNS3SetCSRKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+STATIC
+MemNS3SetPhyFenceKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+BOOLEAN
+MemS3ResumeConstructNBBlockKB (
+ IN OUT VOID *S3NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN UINT8 NodeID
+ );
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+PCI_SPECIAL_CASE PciSpecialCaseFuncKB[] = {
+ {MemNS3GetCSRKB, MemNS3SetCSRKB},
+ {MemNS3GetBitFieldNb, MemNS3SetBitFieldNb},
+ {MemNS3GetNBPStateDepRegUnb, MemNS3SetNBPStateDepRegUnb},
+ { (VOID (*) (ACCESS_WIDTH, PCI_ADDR, VOID *, VOID *)) memDefRet, MemNS3SetDfltPhyRegKB},
+ {MemNS3ChangeMemPStateContextAndFlowNb, MemNS3ChangeMemPStateContextAndFlowNb},
+ { (VOID (*) (ACCESS_WIDTH, PCI_ADDR, VOID *, VOID *)) memDefRet, MemNS3SetDynModeChangeKB},
+ { (VOID (*) (ACCESS_WIDTH, PCI_ADDR, VOID *, VOID *)) memDefRet, MemNS3DisableChannelKB},
+ {MemNS3SaveNBRegisterUnb, MemNS3RestoreNBRegisterUnb},
+ {MemNS3GetBitFieldNb, MemNS3SetPreDriverCalUnb},
+ { (VOID (*) (ACCESS_WIDTH, PCI_ADDR, VOID *, VOID *)) memDefRet, MemNS3SetPhyStatusRegKB},
+ { (VOID (*) (ACCESS_WIDTH, PCI_ADDR, VOID *, VOID *)) memDefRet, MemNS3SetMemClkFreqValUnb},
+ {MemNS3ChangeMemPStateContextNb, MemNS3ChangeMemPStateContextNb},
+ {MemNS3GetBitFieldNb, MemNS3SetPhyFenceKB},
+ { (VOID (*) (ACCESS_WIDTH, PCI_ADDR, VOID *, VOID *)) memDefRet, MemNS3ReleaseNBPSUnb},
+ { (VOID (*) (ACCESS_WIDTH, PCI_ADDR, VOID *, VOID *)) memDefRet, MemNS3ForceNBP0Unb},
+ {MemNSaveHobDataUnb, MemNRestoreHobDataUnb}
+};
+
+MSR_SPECIAL_CASE MsrSpecialCaseFuncKB[] = {
+ { MemNModdifyMtrrFixDramModEn, MemNModdifyMtrrFixDramModEn}
+};
+PCI_REG_DESCRIPTOR ROMDATA S3PciPreSelfRefDescriptorKB[] = {
+ {{14,3, 1}, DO_NOT_CARE, 0, 0},
+ {{0, 0, 0}, FUNC_2, 0x110, 0x00000020},
+ {{0, 0, 0}, FUNC_1, 0x40, 0xFFFF0703},
+ {{0, 0, 0}, FUNC_1, 0x44, 0xFFFF0707},
+ {{0, 0, 0}, FUNC_1, 0xF0, 0xFF00FF83},
+ {{0, 0, 0}, FUNC_1, 0x120, 0x00001FFF},
+ {{0, 0, 0}, FUNC_1, 0x124, 0x00001FFF},
+ {{0, 0, 0}, FUNC_1, 0x200, 0x00FFF87B},
+ {{0, 0, 0}, FUNC_1, 0x204, 0x00FFF800},
+ {{0, 0, 0}, FUNC_2, 0x114, 0x00000200},
+ {{0, 0, 0}, FUNC_2, 0x118, 0xF773FFFF},
+ {{0, 0, 0}, FUNC_2, 0x11C, 0xAFFFFFFF},
+ {{0, 0, 0}, FUNC_2, 0x120, 0x00FFFFFF},
+ {{0, 0, 0}, FUNC_2, 0x1B0, 0xFFD3FF3F},
+ {{0, 0, 0}, FUNC_2, 0x1B4, 0xFC7FFFFF},
+ {{0, 0, 0}, FUNC_2, 0x1BC, 0xFFFFFFFF},
+ {{0, 0, 0}, FUNC_2, 0xA4, 0x00F07900},
+ {{0, 0, 0}, FUNC_5, 0x240, 0xFFFFFFC1},
+ {{0, 0, 0}, FUNC_5, 0x244, 0x0000FFFF},
+ {{0, 0, 0}, FUNC_5, 0x248, 0xFFFFFFC0},
+ {{0, 0, 0}, FUNC_5, 0x24C, 0x0000FFFF}
+};
+
+CONST PCI_REGISTER_BLOCK_HEADER ROMDATA S3PciPreSelfRefKB = {
+ 0,
+ (sizeof (S3PciPreSelfRefDescriptorKB) / sizeof (PCI_REG_DESCRIPTOR)),
+ S3PciPreSelfRefDescriptorKB,
+ PciSpecialCaseFuncKB
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPreSelfDescriptorKB[] = {
+ // DCT 0
+ {{7, 0, 1}, DCT0, 0x40, 0x7FF8FFED, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x44, 0x7FF8FFED, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x48, 0x7FF8FFED, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x4C, 0x7FF8FFED, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x60, 0x7FF8FFE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x64, 0x7FF8FFE0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x78, 0x00020000, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 2, 1}, DCT0, 0x80, 0x0000FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x84, 0x00800003, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x88, 0x3F000000, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x8C, 0x00070000, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x90, 0x0BFF0000, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0xA8, 0x9C730000, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x1BC, 0xFFFFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x200, 0x3F1F1F1F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x204, 0x0F3F0F3F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x208, 0x07070707, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x20C, 0x00030F1F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{2, 0, 1}, DCT0, SET_S3_NB_PSTATE_OFFSET (0x210, 0), 0xFFC7000F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{2, 0, 1}, DCT0, SET_S3_NB_PSTATE_OFFSET (0x210, 1), 0xFFC7000F, DCT0_NBPSTATE_SUPPORT_MASK, DCT0_ANY_DIMM_MASK},
+ {{2, 0, 1}, DCT0, SET_S3_NB_PSTATE_OFFSET (0x210, 2), 0xFFC7000F, DCT0_NBPSTATE_SUPPORT_MASK, DCT0_ANY_DIMM_MASK},
+ {{2, 0, 1}, DCT0, SET_S3_NB_PSTATE_OFFSET (0x210, 3), 0xFFC7000F, DCT0_NBPSTATE_SUPPORT_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x214, 0x000F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x218, 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x21C, 0x001F1F00, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 2, 1}, DCT0, 0x220, 0x00001F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 2, 1}, DCT0, 0x224, 0x0000070F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x228, 0xFFFFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 1, 1}, DCT0, 0x22C, 0x0000001F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x230, 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x234, 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x238, 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x23C, 0x0F0F0F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 2, 1}, DCT0, 0x240, 0x000077FF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 1, 1}, DCT0, 0x244, 0x0000000F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x248, 0xBF3F1F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x24C, 0x3F3F3F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x2E0, 0x5F700000, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x2E8, 0xFFFFFFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 2, 1}, DCT0, 0x2EC, 0x0000FFFF, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 1, 1}, DCT0, 0x2F0, 0x00000001, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 2, 1}, DCT0, 0x400, 0x00000F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x404, 0x8F1F0F1F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x408, 0x1F000007, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 2, 1}, DCT0, 0x420, 0x00000F0F, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+
+ // Phy Initialization
+ // 1. Program D18F2x9C_x0D0F_E013_dct[1:0] = 0118h.
+ {{1, 2, 1}, DCT0, BFPllRegWaitTime, 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+ // 2. Force the phy to M0 with the following sequence:
+ // A. Program D18F2x9C_x0D0F_E006_dct[1:0][PllLockTime] = 190h.
+ {{3, 3, 1}, DCT0, BFPllLockTime, 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+ // B. For each DCT: Program D18F2x9C_x0000_000B_dct[1:0] = 80800000h.
+ {{9, 3, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0B), 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+ // C. Program D18F2x9C_x0000_000B_dct[0] = 40000000h.
+ // D. For each DCT: Program D18F2x9C_x0000_000B_dct[1:0] = 80000000h
+ {{5, 3, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0B), 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+
+ // 3. Phy voltage related
+ {{1, 1, 1}, DCT0, BFDataRxVioLvl, 0x00000018, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFClkRxVioLvl, 0x00000018, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFCmpVioLvl, 0x0000C000, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFCmdRxVioLvl, 0x00000018, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFCsrComparator, 0x0000000C, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFAddrRxVioLvl, 0x00000018, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFObsrvVrefSel, 0x00000007, DCT0_MASK, ANY_DIMM_MASK},
+
+ // 4. Frequency Change
+ // Check if a channel needs to be disabled
+ {{1, 1, 1}, DCT0, BFCKETri, 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+ {{6, 3, 1}, DCT0, 0, 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFPhyClkConfig0, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFPhyClkConfig1, 0, DCT0_MASK, ANY_DIMM_MASK},
+
+ {{7, 0, 1}, DCT0, 0x94, 0x9FF1CC1F, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFPOdtOff, 0, DCT0_MASK, ANY_DIMM_MASK},
+
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04), 0x003F3F3F, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFProcOdtAdv, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFReducedLoop, 0, DCT0_MASK, ANY_DIMM_MASK},
+
+ // Enable MemClk
+ {{10, 0, 1}, DCT0, 0x94, 0, DCT0_MASK, DCT0_ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFPllLockTime, 0, DCT0_MASK, ANY_DIMM_MASK},
+ // Hardware programs POdtOff for the current M-state (D18F2x9C_x0D0F_E006_dct[0][PhyPS]) with the value in D18F2x94_dct[0]
+ // [ProcOdtDis] (via D18F2x9C_x0000_000B_dct[0][ProcOdtDis]) when the memory frequency is updated. BIOS must reprogram this
+ // BIOS must reprogram this field after each frequency change if the target value differs from D18F2x94_dct[0][ProcOdtDis].
+ {{1, 2, 1}, DCT0, BFPOdtOff, 0, DCT0_MASK, ANY_DIMM_MASK},
+
+ // DCT 0
+ // 5. Phy Fence
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C), 0x7FFF3FFF, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataFence2, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFFence2, 0x00007C1F, DCT0_MASK, ANY_DIMM_MASK},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04), 0x003F3F3F, DCT0_MASK, ANY_DIMM_MASK},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00), 0x70777777, DCT0_MASK, ANY_DIMM_MASK},
+ // 6. Phy Compensation Init
+ {{3, 3, 1}, DCT0, BFDisablePredriverCal, 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+ {{1, 0, 1}, DCT0, BFPhy0x0D0F0F0B, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 0, 1}, DCT0, BFPhy0x0D0F0F07, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 0, 1}, DCT0, BFPhy0x0D0F0F03, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteTxPreDriverCal2Pad1, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteTxPreDriverCal2Pad2, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{8, 2, 1}, DCT0, BFDataByteTxPreDriverCal, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFCmdAddr0TxPreDriverCal2Pad1, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFCmdAddr0TxPreDriverCal2Pad2, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFCmdAddr1TxPreDriverCal2Pad1, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFCmdAddr1TxPreDriverCal2Pad2, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFAddrTxPreDriverCal2Pad1, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFAddrTxPreDriverCal2Pad2, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFAddrTxPreDriverCal2Pad3, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFAddrTxPreDriverCal2Pad4, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{8, 2, 1}, DCT0, BFCmdAddr0TxPreDriverCalPad0, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{8, 2, 1}, DCT0, BFCmdAddr1TxPreDriverCalPad0, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{8, 2, 1}, DCT0, BFAddrTxPreDriverCalPad0, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{8, 2, 1}, DCT0, BFClock0TxPreDriverCalPad0, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{8, 2, 1}, DCT0, BFClock1TxPreDriverCalPad0, 0, DCT0_MASK, ANY_DIMM_MASK},
+
+ {{1, 1, 1}, DCT0, BFDisablePredriverCal, 0, DCT0_MASK + DCT1_MASK, ANY_DIMM_MASK},
+ // Program MemPstate 1 registers
+ // Switch to MemPstate context 1
+ {{11, 3, 1}, DO_NOT_CARE, 1, DO_NOT_CARE, DCT0_MEMPSTATE_MASK + DCT1_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFRate, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFProcOdtAdv, 0, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFDataRxVioLvl, 0x00000018, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x200, 0x3F1F1F1F, DCT0_MEMPSTATE_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x204, 0x0F3F0F3F, DCT0_MEMPSTATE_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x208, 0x07070707, DCT0_MEMPSTATE_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x20C, 0x00030F1F, DCT0_MEMPSTATE_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x214, 0x000F0F0F, DCT0_MEMPSTATE_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x218, 0x0F0F0F0F, DCT0_MEMPSTATE_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x21C, 0x001F1F00, DCT0_MEMPSTATE_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 1, 1}, DCT0, 0x22C, 0x0000001F, DCT0_MEMPSTATE_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 2, 1}, DCT0, 0x240, 0x000077FF, DCT0_MEMPSTATE_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x248, 0xBF3F1F0F, DCT0_MEMPSTATE_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 0, 1}, DCT0, 0x2E8, 0xFFFFFFFF, DCT0_MEMPSTATE_MASK, DCT0_ANY_DIMM_MASK},
+ {{7, 2, 1}, DCT0, 0x2EC, 0x0000FFFF, DCT0_MEMPSTATE_MASK, DCT0_ANY_DIMM_MASK},
+ // Compute Phy fence for MemPstate 1
+ // DCT 0
+ {{12, 2, 1}, DCT0, BFChAM1FenceSave, 0, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x04), 0x003F3F3F, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x00), 0x70777777, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+
+ {{1, 1, 1}, DCT0, BFDisablePredriverCal, 0, DCT0_MEMPSTATE_MASK + DCT1_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ // Switch back to MemPstate context 0
+ {{11, 3, 1}, DO_NOT_CARE, 0, DO_NOT_CARE, DCT0_MEMPSTATE_MASK + DCT1_MEMPSTATE_MASK, ANY_DIMM_MASK},
+
+ // Set Fence back to Fence of M0 to prepare for fine delay restore for M0
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0C), 0x7FFF3FFF, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataFence2, 0, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFFence2, 0x00007C1F, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+
+ {{15, 0, 1}, S3_UMA_SIZE, 0, 0, ANY_DIMM_MASK, ANY_DIMM_MASK, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{15, 0, 1}, S3_UMA_BASE, 0, 0, ANY_DIMM_MASK, ANY_DIMM_MASK, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{15, 1, 1}, S3_UMA_MODE, 0, 0, ANY_DIMM_MASK, ANY_DIMM_MASK, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{15, 0, 1}, S3_SUB_4G_CACHE_TOP, 0, 0, ANY_DIMM_MASK, ANY_DIMM_MASK, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{15, 0, 1}, S3_SYSLIMIT, 0, 0, ANY_DIMM_MASK, ANY_DIMM_MASK, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ // Always put UMA_ATTRIBUTE after other types for hob data save and restore
+ {{15, 0, 1}, S3_UMA_ATTRIBUTE, 0, 0, ANY_DIMM_MASK, ANY_DIMM_MASK, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+
+ {{15, 1, 1}, S3_VDDIO, 0, 0, ANY_DIMM_MASK, ANY_DIMM_MASK, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE}
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPreSelfRefKB = {
+ 0,
+ (sizeof (S3CPciPreSelfDescriptorKB) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+ S3CPciPreSelfDescriptorKB,
+ PciSpecialCaseFuncKB
+};
+
+CONDITIONAL_PCI_REG_DESCRIPTOR ROMDATA S3CPciPostSelfDescriptorKB[] = {
+ // DCT0
+ {{12, 2, 1}, DCT0, BFChAM1FenceSave, 0, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFRxDqInsDly, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x10), 0x03FF03FF, DCT0_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x11), 0x03FF03FF, DCT0_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x13), 0x03FF03FF, DCT0_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x14), 0x03FF03FF, DCT0_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x16), 0x03FF03FF, DCT0_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x17), 0x03FF03FF, DCT0_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x19), 0x03FF03FF, DCT0_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1A), 0x03FF03FF, DCT0_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x20), 0x03FF03FF, DCT0_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x21), 0x03FF03FF, DCT0_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x23), 0x03FF03FF, DCT0_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x24), 0x03FF03FF, DCT0_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x26), 0x03FF03FF, DCT0_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x27), 0x03FF03FF, DCT0_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x29), 0x03FF03FF, DCT0_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x2A), 0x03FF03FF, DCT0_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x01), 0xFFFFFFFF, DCT0_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x02), 0xFFFFFFFF, DCT0_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x101), 0xFFFFFFFF, DCT0_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x102), 0xFFFFFFFF, DCT0_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x201), 0xFFFFFFFF, DCT0_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x202), 0xFFFFFFFF, DCT0_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x301), 0xFFFFFFFF, DCT0_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x302), 0xFFFFFFFF, DCT0_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x05), 0x3E3E3E3E, DCT0_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x06), 0x3E3E3E3E, DCT0_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x105), 0x3E3E3E3E, DCT0_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x106), 0x3E3E3E3E, DCT0_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x205), 0x3E3E3E3E, DCT0_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x206), 0x3E3E3E3E, DCT0_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x305), 0x3E3E3E3E, DCT0_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x306), 0x3E3E3E3E, DCT0_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x30), 0x00FF00FF, DCT0_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x31), 0x00FF00FF, DCT0_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x33), 0x00FF00FF, DCT0_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x34), 0x00FF00FF, DCT0_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x36), 0x00FF00FF, DCT0_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x37), 0x00FF00FF, DCT0_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x39), 0x00FF00FF, DCT0_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3A), 0x00FF00FF, DCT0_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x40), 0x00FF00FF, DCT0_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x41), 0x00FF00FF, DCT0_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x43), 0x00FF00FF, DCT0_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x44), 0x00FF00FF, DCT0_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x46), 0x00FF00FF, DCT0_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x47), 0x00FF00FF, DCT0_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x49), 0x00FF00FF, DCT0_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x4A), 0x00FF00FF, DCT0_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0D), 0x037F037F, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFPhy0x0D0F0F13, 0x00000083, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDllCSRBiasTrim, 0x00007000, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFRxSsbMntClkEn, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFEnRxPadStandby, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFEccDLLPwrDnConf, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFTxPclkGateEn, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFPchgPdPclkGateEn, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFDataCtlPipePclkGateEn, 0, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte0, 0xBFBF, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte1, 0xBFBF, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte2, 0xBFBF, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte3, 0xBFBF, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte4, 0xBFBF, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte5, 0xBFBF, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte6, 0xBFBF, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte7, 0xBFBF, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte8, 0xBFBF, DCT0_MASK, ANY_DIMM_MASK},
+
+ {{11, 3, 1}, DO_NOT_CARE, 1, DO_NOT_CARE, DCT0_MEMPSTATE_MASK + DCT1_MEMPSTATE_MASK, ANY_DIMM_MASK},
+
+ // DCT0
+ {{12, 2, 1}, DCT0, BFChAM1FenceSave, 0, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFRxDqInsDly, 0, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x10), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x11), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x13), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x14), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x16), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x17), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x19), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x1A), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x20), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x21), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x23), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x24), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x26), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x27), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x29), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x2A), 0x03FF03FF, DCT0_MEMPSTATE_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x01), 0xFFFFFFFF, DCT0_MEMPSTATE_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x02), 0xFFFFFFFF, DCT0_MEMPSTATE_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x101), 0xFFFFFFFF, DCT0_MEMPSTATE_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x102), 0xFFFFFFFF, DCT0_MEMPSTATE_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x201), 0xFFFFFFFF, DCT0_MEMPSTATE_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x202), 0xFFFFFFFF, DCT0_MEMPSTATE_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x301), 0xFFFFFFFF, DCT0_MEMPSTATE_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x302), 0xFFFFFFFF, DCT0_MEMPSTATE_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x05), 0x3E3E3E3E, DCT0_MEMPSTATE_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x06), 0x3E3E3E3E, DCT0_MEMPSTATE_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x105), 0x3E3E3E3E, DCT0_MEMPSTATE_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x106), 0x3E3E3E3E, DCT0_MEMPSTATE_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x205), 0x3E3E3E3E, DCT0_MEMPSTATE_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x206), 0x3E3E3E3E, DCT0_MEMPSTATE_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x305), 0x3E3E3E3E, DCT0_MEMPSTATE_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x306), 0x3E3E3E3E, DCT0_MEMPSTATE_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x30), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x31), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x33), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x34), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x36), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x37), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x39), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x3A), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x40), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x41), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x01},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x43), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x44), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x04},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x46), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x47), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x10},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x49), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x4A), 0x00FF00FF, DCT0_MEMPSTATE_MASK, 0x40},
+ {{0, 0, 1}, FUNC_2, SET_S3_SPECIAL_OFFSET (DCT_PHY_FLAG, 0, 0x0D), 0x037F037F, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFPhy0x0D0F0F13, 0x00000083, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDllCSRBiasTrim, 0x00007000, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFRxSsbMntClkEn, 0, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFEnRxPadStandby, 0, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte0, 0xBFBF, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte1, 0xBFBF, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte2, 0xBFBF, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte3, 0xBFBF, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte4, 0xBFBF, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte5, 0xBFBF, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte6, 0xBFBF, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte7, 0xBFBF, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFDataByteDllPowerMgnByte8, 0xBFBF, DCT0_MEMPSTATE_MASK, ANY_DIMM_MASK},
+
+ {{11, 3, 1}, DO_NOT_CARE, 0, DO_NOT_CARE, DCT0_MEMPSTATE_MASK + DCT1_MEMPSTATE_MASK, ANY_DIMM_MASK},
+
+ {{1, 1, 1}, DCT0, BFAddrCmdTri, 0x0000000A1, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 1, 1}, DCT0, BFDisDllShutdownSR, 0, DCT0_MASK, ANY_DIMM_MASK},
+
+ {{1, 1, 1}, DCT0, BFVrefSel, 0x00000007, DCT0_MASK, ANY_DIMM_MASK},
+ {{1, 2, 1}, DCT0, BFVrefDAC, 0x000001F8, DCT0_MASK, ANY_DIMM_MASK},
+
+ {{0, 0, 0}, FUNC_2, 0x1B4, 0x08000000, ANY_DIMM_MASK, ANY_DIMM_MASK},
+ {{0, 0, 0}, FUNC_3, 0x180, 0x02000000, ANY_DIMM_MASK, ANY_DIMM_MASK},
+ {{0, 0, 0}, FUNC_3, 0x58, 0x0000001F, ANY_DIMM_MASK, ANY_DIMM_MASK},
+ {{0, 0, 0}, FUNC_3, 0x5C, 0x00000001, ANY_DIMM_MASK, ANY_DIMM_MASK},
+ {{0, 0, 0}, FUNC_3, 0x44, 0x00400004, ANY_DIMM_MASK, ANY_DIMM_MASK},
+
+ {{0, 0, 0}, FUNC_2, 0x118, 0x00040000, ANY_DIMM_MASK, ANY_DIMM_MASK},
+ {{0, 0, 0}, FUNC_2, 0x118, 0x00080000, ANY_DIMM_MASK, ANY_DIMM_MASK},
+
+ {{13, 3, 1}, DO_NOT_CARE, 0, DO_NOT_CARE, ANY_DIMM_MASK, ANY_DIMM_MASK}
+};
+
+CONST CPCI_REGISTER_BLOCK_HEADER ROMDATA S3CPciPostSelfRefKB = {
+ 0,
+ (sizeof (S3CPciPostSelfDescriptorKB) / sizeof (CONDITIONAL_PCI_REG_DESCRIPTOR)),
+ S3CPciPostSelfDescriptorKB,
+ PciSpecialCaseFuncKB
+};
+
+MSR_REG_DESCRIPTOR ROMDATA S3MSRPreSelfRefDescriptorKB[] = {
+ {{0, 0, 0}, 0xC0010010, 0x00000000007F0000},
+ {{0, 0, 0}, 0xC001001A, 0x0000FFFFFF800000},
+ {{0, 0, 0}, 0xC001001D, 0x0000FFFFFF800000},
+ {{0, 0, 0}, 0xC001001F, 0x0044601080000600},
+ {{0, 0, 1}, 0, 0, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x250, 0x1F1F1F1F1F1F1F1F, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x258, 0x1F1F1F1F1F1F1F1F, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 1}, 1, 0, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x00000200, 0x0000FFFFFFFFF007, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x00000202, 0x0000FFFFFFFFF007, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x00000204, 0x0000FFFFFFFFF007, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x00000206, 0x0000FFFFFFFFF007, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x00000208, 0x0000FFFFFFFFF007, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x0000020A, 0x0000FFFFFFFFF007, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x00000201, 0x0000FFFFFFFFF800, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x00000203, 0x0000FFFFFFFFF800, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x00000205, 0x0000FFFFFFFFF800, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x00000207, 0x0000FFFFFFFFF800, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x00000209, 0x0000FFFFFFFFF800, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE},
+ {{0, 0, 0}, 0x0000020B, 0x0000FFFFFFFFF800, RESTORE_TRAINING_MODE | CAPSULE_REBOOT_MODE}
+};
+
+CONST MSR_REGISTER_BLOCK_HEADER ROMDATA S3MSRPreSelfRefKB = {
+ 0,
+ (sizeof (S3MSRPreSelfRefDescriptorKB) / sizeof (MSR_REG_DESCRIPTOR)),
+ S3MSRPreSelfRefDescriptorKB,
+ MsrSpecialCaseFuncKB
+};
+
+VOID *MemS3RegListKB[] = {
+ (VOID *)&S3PciPreSelfRefKB,
+ NULL,
+ (VOID *)&S3CPciPreSelfRefKB,
+ (VOID *)&S3CPciPostSelfRefKB,
+ (VOID *)&S3MSRPreSelfRefKB,
+ NULL,
+ NULL,
+ NULL
+};
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes the northbridge block for S3 resume
+ *
+ * @param[in,out] *S3NBPtr - Pointer to MEM_NB_BLOCK.
+ * @param[in,out] *MemPtr - Pointer to MEM_DATA_STRUCT.
+ * @param[in] NodeID - Node ID of the target node.
+ *
+ * @return BOOLEAN
+ * TRUE - This is the correct constructor for the targeted node.
+ * FALSE - This isn't the correct constructor for the targeted node.
+ */
+BOOLEAN
+MemS3ResumeConstructNBBlockKB (
+ IN OUT VOID *S3NBPtr,
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN UINT8 NodeID
+ )
+{
+ INT32 i;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = ((S3_MEM_NB_BLOCK *)S3NBPtr)->NBPtr;
+
+ //
+ // Determine if this is the expected NB Type
+ //
+ GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader));
+ if (!MemNIsIdSupportedKB (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) {
+ return FALSE;
+ }
+
+ NBPtr->RefPtr = NULL;
+ NBPtr->MemPtr = MemPtr;
+ NBPtr->MCTPtr = &(MemPtr->DiesPerSystem[NodeID]);
+ NBPtr->PciAddr.AddressValue = MemPtr->DiesPerSystem[NodeID].PciAddr.AddressValue;
+ MemNInitNBRegTableKB (NBPtr, NBPtr->NBRegTable);
+ NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24;
+ NBPtr->Dct = 0;
+ NBPtr->Channel = 0;
+ NBPtr->Ganged = FALSE;
+ NBPtr->NodeCount = MAX_NODES_SUPPORTED_KB;
+ NBPtr->DctCount = MAX_DCTS_PER_NODE_KB;
+ NBPtr->MemPstate = MEMORY_PSTATE0;
+ NBPtr->MemPstateStage = 0;
+ NBPtr->NbPsCtlReg = 0;
+
+ NBPtr->IsSupported[SetDllShutDown] = TRUE;
+
+ for (i = 0; i < EnumSize; i++) {
+ NBPtr->IsSupported[i] = FALSE;
+ }
+
+ for (i = 0; i < NumberOfHooks; i++) {
+ NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) memDefTrue;
+ }
+
+ LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &MemPtr->StdHeader);
+
+ NBPtr->SwitchDCT = MemNSwitchDCTNb;
+ NBPtr->SwitchChannel = MemNSwitchChannelNb;
+ NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldKB;
+ NBPtr->GetBitField = MemNGetBitFieldNb;
+ NBPtr->SetBitField = MemNSetBitFieldNb;
+ NBPtr->MemNIsIdSupportedNb = MemNIsIdSupportedKB;
+ ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3ExitSelfRefReg = (VOID (*) (MEM_NB_BLOCK *, AMD_CONFIG_PARAMS *)) memDefRet;
+ ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConPCIMask = MemNS3GetConPCIMaskKB;
+ ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetConMSRMask = (VOID (*) (MEM_NB_BLOCK *, DESCRIPTOR_GROUP *)) memDefRet;
+ ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3Resume = MemNS3ResumeUNb;
+ ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3RestoreScrub = MemNS3RestoreScrubNb;
+ ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetRegLstPtr = MemNS3GetRegLstPtrKB;
+ ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3GetDeviceRegLst = MemNS3GetDeviceRegLstKB;
+ ((S3_MEM_NB_BLOCK *)S3NBPtr)->MemS3SpecialCaseHeapSize = 0;
+ NBPtr->FamilySpecificHook[DCTSelectSwitch] = MemNS3DctCfgSelectUnb;
+
+ MemNSetBitFieldNb (NBPtr, BFDctCfgSel, 0);
+ MemNSwitchDCTNb (NBPtr, 0);
+ MemNSetBitFieldNb (NBPtr, BFMemPsSel, 0);
+
+ if (MemNGetBitFieldNb (NBPtr, BFMemPstateDis) != 1) {
+ NBPtr->MemPstateStage = MEMORY_PSTATE_S3_STAGE;
+ MemNBrdcstSetUnConditionalNb (NBPtr, BFPStateToAccess, 0);
+ }
+
+ return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns the register list for each device for KB
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in, out] *DescriptPtr - Pointer to DESCRIPTOR_GROUP
+ * @return UINT16 - size of the device descriptor on the target node.
+ */
+UINT16
+STATIC
+MemNS3GetRegLstPtrKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT DESCRIPTOR_GROUP *DescriptPtr
+ )
+{
+ UINT8 i;
+ UINT16 Size;
+ Size = 0;
+ for (i = PRESELFREF; i <= POSTSELFREF; i ++) {
+ DescriptPtr->PCIDevice[i].Type = (UINT8) (DEV_TYPE_PCI_PRE_ESR + i);
+ DescriptPtr->PCIDevice[i].Node = NBPtr->Node;
+ DescriptPtr->PCIDevice[i].RegisterListID = 0xFFFFFFFF;
+ if ((PCI_REGISTER_BLOCK_HEADER *) MemS3RegListKB[PCI_LST_ESR_KB - PCI_LST_ESR_KB + i] != NULL) {
+ DescriptPtr->PCIDevice[i].RegisterListID = PCI_LST_ESR_KB + i;
+ Size += sizeof (PCI_DEVICE_DESCRIPTOR);
+ }
+ DescriptPtr->CPCIDevice[i].Type = (UINT8) (DEV_TYPE_CPCI_PRE_ESR + i);
+ DescriptPtr->CPCIDevice[i].Node = NBPtr->Node;
+ DescriptPtr->CPCIDevice[i].RegisterListID = 0xFFFFFFFF;
+ if ((CPCI_REGISTER_BLOCK_HEADER *) MemS3RegListKB[CPCI_LST_ESR_KB - PCI_LST_ESR_KB + i] != NULL) {
+ DescriptPtr->CPCIDevice[i].RegisterListID = CPCI_LST_ESR_KB + i;
+ Size += sizeof (CONDITIONAL_PCI_DEVICE_DESCRIPTOR);
+ }
+ DescriptPtr->MSRDevice[i].Type = (UINT8) (DEV_TYPE_MSR_PRE_ESR + i);
+ DescriptPtr->MSRDevice[i].RegisterListID = 0xFFFFFFFF;
+ if ((MSR_REGISTER_BLOCK_HEADER *) MemS3RegListKB[MSR_LST_ESR_KB - PCI_LST_ESR_KB + i] != NULL) {
+ DescriptPtr->MSRDevice[i].RegisterListID = MSR_LST_ESR_KB + i;
+ Size += sizeof (MSR_DEVICE_DESCRIPTOR);
+ }
+ DescriptPtr->CMSRDevice[i].Type = (UINT8) (DEV_TYPE_CMSR_PRE_ESR + i);
+ DescriptPtr->CMSRDevice[i].RegisterListID = 0xFFFFFFFF;
+ if ((CMSR_REGISTER_BLOCK_HEADER *) MemS3RegListKB[CMSR_LST_ESR_KB - PCI_LST_ESR_KB + i] != NULL) {
+ DescriptPtr->CMSRDevice[i].RegisterListID = CMSR_LST_ESR_KB + i;
+ Size += sizeof (CONDITIONAL_MSR_DEVICE_DESCRIPTOR);
+ }
+ }
+ return Size;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function return the register list according to the register ID.
+ *
+ * @param[in] RegisterLstID - value of the Register list ID.
+ * @param[out] **RegisterHeader - pointer to the address of the register list.
+ * @return AGESA_STATUS
+ * - AGESA_FATAL
+ * - AGESA_SUCCESS
+ */
+AGESA_STATUS
+STATIC
+MemNS3GetDeviceRegLstKB (
+ IN UINT32 RegisterLstID,
+ OUT VOID **RegisterHeader
+ )
+{
+ if (RegisterLstID >= (sizeof (MemS3RegListKB) / sizeof (VOID *))) {
+ ASSERT(FALSE); // RegisterListID exceeded size of Register list
+ return AGESA_FATAL;
+ }
+ if (MemS3RegListKB[RegisterLstID] != NULL) {
+ *RegisterHeader = MemS3RegListKB[RegisterLstID];
+ return AGESA_SUCCESS;
+ }
+ ASSERT(FALSE); // Device register list error
+ return AGESA_FATAL;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function that set PllLockTime or disable auto compensation.
+ *
+ * @param[in] AccessWidth - Access width of the register.
+ * @param[in] Address - address in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value to be written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+STATIC
+MemNS3SetDfltPhyRegKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT16 RegValue;
+ BIT_FIELD_NAME BitField;
+
+ IDS_SKIP_HOOK (IDS_BEFORE_S3_SPECIAL, &Address, ConfigPtr) {
+ BitField = (BIT_FIELD_NAME) Address.Address.Register;
+ RegValue = 0;
+
+ if (BitField == BFPllLockTime) {
+ RegValue = 0x190;
+ } else if (BitField == BFDisablePredriverCal) {
+ RegValue = 3;
+ } else {
+ ASSERT (FALSE);
+ }
+ MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets bit 31 [DynModeChange] of F2x9C_xB
+ *
+ * @param[in] AccessWidth - Access width of the register.
+ * @param[in] Address - address in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value to be written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+STATIC
+MemNS3SetDynModeChangeKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT32 RegValue;
+
+ IDS_SKIP_HOOK (IDS_BEFORE_S3_SPECIAL, &Address, ConfigPtr) {
+ if ((Address.Address.Register & 0x400) == 0) {
+ RegValue = 0x40000000;
+ MemNS3SetCSRKB (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr);
+ }
+ RegValue = 0x80000000;
+ MemNS3SetCSRKB (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets F2x9C_xB to 0x80800000
+ *
+ * @param[in] AccessWidth - Access width of the register.
+ * @param[in] Address - address in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value to be written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+STATIC
+MemNS3SetPhyStatusRegKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT32 RegValue;
+
+ IDS_SKIP_HOOK (IDS_BEFORE_S3_SPECIAL, &Address, ConfigPtr) {
+ RegValue = 0x80800000;
+ MemNS3SetCSRKB (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function does the channel disable sequence
+ *
+ * @param[in] AccessWidth - Access width of the register.
+ * @param[in] Address - address in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value to be written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+STATIC
+MemNS3DisableChannelKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ LOCATE_HEAP_PTR LocateBufferPtr;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ UINT32 RegValue;
+ UINT8 Die;
+
+ // See which Node should be accessed
+ Die = (UINT8) (Address.Address.Device - 24);
+
+ LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr;
+ NBPtr = S3NBPtr[Die].NBPtr;
+
+ // Function field contains the DCT number
+ NBPtr->SwitchDCT (NBPtr, (UINT8) Address.Address.Function);
+ RegValue = MemNGetBitFieldNb (NBPtr, BFCKETri);
+ // if CKETri is 0b1111, this channel is disabled
+ if (RegValue == 0xF) {
+ //Wait for 24 MEMCLKs, which is 60ns under 400MHz
+ MemFS3Wait10ns (6, NBPtr->MemPtr);
+ MemNSetBitFieldNb (NBPtr, BFMemClkDis, 0xFF);
+ MemNSetBitFieldNb (NBPtr, BFDisDramInterface, 1);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function changes memory Pstate context
+ *
+ * @param[in] AccessWidth - Access width of the register.
+ * @param[in] Address - address in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value to be written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+MemNS3ChangeMemPStateContextAndFlowNb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ LOCATE_HEAP_PTR LocateBufferPtr;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ UINT8 Die;
+
+ // See which Node should be accessed
+ Die = (UINT8) (Address.Address.Device - 24);
+
+ LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+
+ if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr;
+ NBPtr = S3NBPtr[Die].NBPtr;
+ if (NBPtr->MemPstate == MEMORY_PSTATE0) {
+ // If MemoryPstate is not disabled, switch to MemPState 1 context, and reprocess the register list
+ MemNChangeMemPStateContextNb (NBPtr, 1);
+ *(UINT32 *) Value = RESTART_FROM_BEGINNING_LIST;
+ } else {
+ // Switch back to MemPstate0 Context
+ MemNChangeMemPStateContextNb (NBPtr, 0);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns the conditional PCI device mask
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in, out] *DescriptPtr - Pointer to DESCRIPTOR_GROUP
+ * @return none
+ */
+VOID
+STATIC
+MemNS3GetConPCIMaskKB (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT DESCRIPTOR_GROUP *DescriptPtr
+ )
+{
+ BIT_FIELD_NAME bitfield;
+ UINT32 RegVal;
+ UINT8 DCT;
+ UINT8 DimmMask;
+ UINT8 BadDimmMask;
+ UINT8 NbPsCapMsk;
+ UINT8 MemPstateMsk;
+ UINT8 CsPerDelay;
+
+ NbPsCapMsk = 0;
+ MemPstateMsk = 0;
+ DimmMask = 0;
+ BadDimmMask = 0;
+ CsPerDelay = 1;
+
+ for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) {
+ MemNSwitchDCTNb (NBPtr, DCT);
+ if (MemNGetBitFieldNb (NBPtr, BFMemClkFreqVal)) {
+ if (MemNGetBitFieldNb (NBPtr, BFPerRankTimingEn) == 0) {
+ CsPerDelay = 2;
+ }
+ for (bitfield = BFCSBaseAddr0Reg; bitfield <= BFCSBaseAddr7Reg; bitfield ++) {
+ RegVal = MemNGetBitFieldNb (NBPtr, bitfield);
+ if (RegVal & 0x1) {
+ DimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) / CsPerDelay) << 1) + DCT));
+ } else if (RegVal & 0x4) {
+ BadDimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) / CsPerDelay) << 1) + DCT));
+ }
+ }
+ }
+ }
+ // Check if the system is capable of doing NB Pstate change
+ if (MemNGetBitFieldNb (NBPtr, BFNbPstateDis) == 0) {
+ NbPsCapMsk = DCT0_NBPSTATE_SUPPORT_MASK;
+ }
+ if (MemNGetBitFieldNb (NBPtr, BFMemPstateDis) == 0) {
+ MemPstateMsk = DCT0_MEMPSTATE_MASK;
+ }
+
+ MemNSwitchDCTNb (NBPtr, 0);
+ // Set channel mask
+ DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = 0;
+ DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = 0;
+ for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) {
+ if (DimmMask & (0x55 << DCT)) {
+ // Set mask before exit self refresh
+ DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= (NbPsCapMsk | MemPstateMsk | 1) << DCT;
+ // Set mask after exit self refresh
+ DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= (NbPsCapMsk | MemPstateMsk | 1) << DCT;
+ } else if (BadDimmMask & (0x55 << DCT)) {
+ // Need to save function 2 registers for bad dimm
+ DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 1 << DCT;
+ }
+ }
+
+ // Set dimm mask
+ DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = DimmMask;
+ DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = DimmMask;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function read the value of CSR register.
+ *
+ * @param[in] AccessWidth - Access width of the register
+ * @param[in] Address - address of the CSR register in PCI_ADDR format.
+ * @param[in] *Value - Pointer to the value be read.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+STATIC
+MemNS3GetCSRKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT8 TempValue;
+ UINT8 Dct;
+ UINT32 ExtendOffset;
+ UINT32 TempFunc;
+
+ ExtendOffset = Address.Address.Register;
+ TempFunc = Address.Address.Function;
+
+ // Switch Dct
+ Address.Address.Function = FUNC_1;
+ Address.Address.Register = 0x10C;
+ Dct = 0;
+ if (ExtendOffset & 0x400) {
+ Dct = 1;
+ }
+ LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+ TempValue = (TempValue & 0xF8) | Dct;
+ LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+ Address.Address.Function = TempFunc;
+
+ Address.Address.Register = 0x98;
+ ExtendOffset &= 0x3FF;
+ LibAmdPciWrite (AccessS3SaveWidth32, Address, &ExtendOffset, ConfigPtr);
+ IDS_OPTION_HOOK (IDS_AFTER_DCT_PHY_ACCESS, NULL, ConfigPtr);
+ Address.Address.Register = 0x9C;
+ LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function write to a CSR register
+ *
+ * @param[in] AccessWidth - Access width of the register
+ * @param[in] Address - address of the CSR register in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value be read.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+STATIC
+MemNS3SetCSRKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT8 TempValue;
+ UINT8 Dct;
+ UINT32 ExtendOffset;
+ UINT32 ValueWrite;
+ UINT32 TempFunc;
+
+ ExtendOffset = Address.Address.Register;
+
+ TempFunc = Address.Address.Function;
+ // Switch Dct
+ Address.Address.Function = FUNC_1;
+ Address.Address.Register = 0x10C;
+ Dct = 0;
+ if (ExtendOffset & 0x400) {
+ Dct = 1;
+ }
+ LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+ TempValue = (TempValue & 0xFE) | Dct;
+ LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+
+ Address.Address.Function = TempFunc;
+ Address.Address.Register = 0x9C;
+
+ ExtendOffset &= 0x3FF;
+ ExtendOffset |= 0x40000000;
+ switch (AccessWidth) {
+ case AccessS3SaveWidth8:
+ ValueWrite = *(UINT8 *) Value;
+ break;
+ case AccessS3SaveWidth16:
+ ValueWrite = *(UINT16 *) Value;
+ break;
+ case AccessS3SaveWidth32:
+ ValueWrite = *(UINT32 *) Value;
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ LibAmdPciWrite (AccessS3SaveWidth32, Address, &ValueWrite, ConfigPtr);
+ Address.Address.Register = 0x98;
+ LibAmdPciWrite (AccessS3SaveWidth32, Address, &ExtendOffset, ConfigPtr);
+ IDS_OPTION_HOOK (IDS_AFTER_DCT_PHY_ACCESS, NULL, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function that set Phy Fence
+ *
+ * @param[in] AccessWidth - Access width of the register.
+ * @param[in] Address - address in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value to be written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+STATIC
+MemNS3SetPhyFenceKB (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT16 FenceValue;
+ UINT16 Fence2Data;
+ UINT16 Fence2Reg;
+ BIT_FIELD_NAME BitField;
+ MEM_NB_BLOCK *NBPtr;
+ LOCATE_HEAP_PTR LocateBufferPtr;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+
+ BitField = (BIT_FIELD_NAME) Address.Address.Register;
+ FenceValue = *(UINT16 *) Value;
+ // See which Node should be accessed
+
+ LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+
+ if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr;
+ NBPtr = S3NBPtr[0].NBPtr;
+
+ // Do nothing if currently in memory pstate 0 context
+ if (NBPtr->MemPstate == MEMORY_PSTATE0) {
+ return;
+ }
+
+ MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 30, 16, BFPhyFence);
+ MemNSetBitFieldNb (NBPtr, BFPhyFence, FenceValue);
+
+ // Program Fence 2 for MState 1
+ Fence2Data = 0;
+ if ((FenceValue & 0x1F) < 16) {
+ Fence2Data |= (FenceValue & 0x1F) | 0x10;
+ }
+ if (((FenceValue >> 5) & 0x1F) < 16) {
+ Fence2Data |= (((FenceValue >> 5) & 0x1F) | 0x10) << 10;
+ }
+ if (((FenceValue >> 10) & 0x1F) < 16) {
+ Fence2Data |= (((FenceValue >> 10) & 0x1F) | 0x10) << 5;
+ }
+ MemNSetBitFieldNb (NBPtr, BFDataFence2, Fence2Data);
+
+ // Program another Fence 2 register for Mstate 1
+ Fence2Reg = (UINT16) MemNGetBitFieldNb (NBPtr, BFFence2);
+ Fence2Reg = (Fence2Reg &~(UINT16) ((0x1F << 10) | 0x1F)) | (Fence2Data & 0x1F) | (((Fence2Data >> 5) & 0x1F) << 10);
+ MemNSetBitFieldNb (NBPtr, BFFence2, Fence2Reg);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mn.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mn.c
new file mode 100644
index 0000000..f9e62d0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mn.c
@@ -0,0 +1,608 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mn.c
+ *
+ * Common Northbridge functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/)
+ * @e \$Revision: 86704 $ @e \$Date: 2013-01-24 17:29:29 -0600 (Thu, 24 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "S3.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_NB_MN_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern OPTION_MEM_FEATURE_NB* memNTrainFlowControl[];
+
+extern BUILD_OPT_CFG UserOptions;
+extern PSO_ENTRY DefaultPlatformMemoryConfiguration[];
+extern MEM_PLATFORM_CFG* memPlatformTypeInstalled[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes the default values in the MEM_DATA_STRUCT
+ *
+ * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT
+ *
+ */
+VOID
+MemNCmnInitDefaultsNb (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ )
+{
+ UINT8 Socket;
+ UINT8 Channel;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ ASSERT (MemPtr != NULL);
+ RefPtr = MemPtr->ParameterListPtr;
+ //
+ // Memory Map/Mgt.
+ // Mask Bottom IO with 0xF8 to force hole size to have granularity of 128MB
+ RefPtr->BottomIo = 0xE0;
+ RefPtr->UmaMode = UserOptions.CfgUmaMode;
+ RefPtr->UmaSize = UserOptions.CfgUmaSize;
+ RefPtr->MemHoleRemapping = TRUE;
+ RefPtr->LimitMemoryToBelow1Tb = UserOptions.CfgLimitMemoryToBelow1Tb;
+ //
+ // Dram Timing
+ //
+ RefPtr->UserTimingMode = UserOptions.CfgTimingModeSelect;
+ RefPtr->MemClockValue = UserOptions.CfgMemoryClockSelect;
+ //
+ // Socket Struct
+ //
+ for (Socket = 0; Socket < MAX_SOCKETS_SUPPORTED; Socket++) {
+ for (Channel = 0; Channel < MAX_CHANNELS_PER_SOCKET; Channel++) {
+ MemPtr->SocketList[Socket].ChannelPtr[Channel] = NULL;
+ MemPtr->SocketList[Socket].TimingsPtr[Channel] = NULL;
+ }
+ }
+ //
+ // Memory Clear
+ RefPtr->EnableMemClr = TRUE;
+ //
+ // TableBasedAlterations
+ //
+ RefPtr->TableBasedAlterations = NULL;
+ //
+ // Platform config table
+ //
+ RefPtr->PlatformMemoryConfiguration = DefaultPlatformMemoryConfiguration;
+ //
+ // Memory Restore
+ //
+ RefPtr->MemRestoreCtl = FALSE;
+ RefPtr->SaveMemContextCtl = FALSE;
+ //
+ // Capsule support
+ //
+ RefPtr->IsCapsuleMode = FALSE;
+ AmdS3ParamsInitializer (&RefPtr->MemContext);
+ //
+ // Dram Configuration
+ //
+ RefPtr->EnableBankIntlv = UserOptions.CfgMemoryEnableBankInterleaving;
+ RefPtr->EnableNodeIntlv = UserOptions.CfgMemoryEnableNodeInterleaving;
+ RefPtr->EnableChannelIntlv = UserOptions.CfgMemoryChannelInterleaving;
+ RefPtr->EnableBankSwizzle = UserOptions.CfgBankSwizzle;
+ RefPtr->EnableParity = UserOptions.CfgMemoryParityEnable;
+ RefPtr->EnableOnLineSpareCtl = UserOptions.CfgOnlineSpare;
+ //
+ // Dram Power
+ //
+ RefPtr->EnablePowerDown = UserOptions.CfgMemoryPowerDown;
+ //
+ // ECC
+ //
+ RefPtr->EnableEccFeature = UserOptions.CfgEnableEccFeature;
+ //
+ // Vref
+ //
+ RefPtr->ExternalVrefCtl = UserOptions.CfgExternalVrefCtlFeature;
+ //
+ //Training Mode
+ //
+ RefPtr->ForceTrainMode = UserOptions.CfgForceTrainMode;
+ //
+ // AMP
+ //
+ RefPtr->AmpEnable = FALSE;
+ RefPtr->AmpWarningMsgEnable = FALSE;
+ //
+ // Preferred technology type that AGESA will enable when it is mixed with other technology types.
+ //
+ RefPtr->DimmTypeUsedInMixedConfig = UserOptions.CfgDimmTypeUsedInMixedConfig;
+
+ // 2x DRAM refresh rate.
+ RefPtr->DramDoubleRefreshRate = UserOptions.CfgDramDoubleRefreshRateEn;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initializes member functions and variables of NB block.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitNBDataNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ INT32 i;
+ UINT8 *BytePtr;
+
+ NBPtr->DctCachePtr = NBPtr->DctCache;
+ NBPtr->PsPtr = NBPtr->PSBlock;
+
+ BytePtr = (UINT8 *) (NBPtr->DctCache);
+ for (i = 0; i < sizeof (NBPtr->DctCache); i++) {
+ *BytePtr++ = 0;
+ }
+
+ for (i = 0; i < EnumSize; i++) {
+ NBPtr->IsSupported[i] = FALSE;
+ }
+
+ for (i = 0; i < NumberOfHooks; i++) {
+ NBPtr->FamilySpecificHook[i] = MemNDefaultFamilyHookNb;
+ }
+
+ for (i = 0; i < NBPtr->DctCount; i++) {
+ NBPtr->PSBlock[i].MemPGetPass1Seeds = (BOOLEAN (*) (MEM_NB_BLOCK *)) memDefTrue;
+ }
+
+ NBPtr->SwitchDCT = MemNSwitchDCTNb;
+ NBPtr->SwitchChannel = MemNSwitchChannelNb;
+ NBPtr->GetBitField = MemNGetBitFieldNb;
+ NBPtr->SetBitField = MemNSetBitFieldNb;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * Get System address of Chipselect RJ 16 bits (Addr[47:16])
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Receiver - Chipselect to be targeted [0-7]
+ * @param[out] AddrPtr - Pointer to System Address [47:16]
+ *
+ * @return TRUE - Address is valid
+ * @return FALSE - Address is not valid
+ */
+
+BOOLEAN
+MemNGetMCTSysAddrNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Receiver,
+ OUT UINT32 *AddrPtr
+ )
+{
+ S_UINT64 SMsr;
+ UINT32 CSBase;
+ UINT32 HoleBase;
+ UINT32 DctSelBaseAddr;
+ UINT32 BottomUma;
+ DIE_STRUCT *MCTPtr;
+ MEM_DATA_STRUCT *MemPtr;
+
+ MCTPtr = NBPtr->MCTPtr;
+ MemPtr = NBPtr->MemPtr;
+
+ ASSERT (Receiver < 8);
+
+ CSBase = MemNGetBitFieldNb (NBPtr, BFCSBaseAddr0Reg + Receiver);
+ if (CSBase & 1) {
+ ASSERT ((CSBase & 0xE0) == 0); // Should not enable CS interleaving before DQS training.
+
+ // Scale base address from [39:8] to [47:16]
+ CSBase >>= 8;
+
+ HoleBase = MCTPtr->NodeHoleBase ? MCTPtr->NodeHoleBase : 0x7FFFFFFF;
+
+ if ((MemNGetBitFieldNb (NBPtr, BFDctSelHiRngEn) == 1) && (NBPtr->Dct == MemNGetBitFieldNb (NBPtr, BFDctSelHi))) {
+ DctSelBaseAddr = MemNGetBitFieldNb (NBPtr, BFDctSelBaseAddr) << (27 - 16);
+ if (DctSelBaseAddr > HoleBase) {
+ DctSelBaseAddr -= _4GB_RJ16 - HoleBase;
+ }
+ CSBase += DctSelBaseAddr;
+ } else {
+ CSBase += MCTPtr->NodeSysBase;
+ }
+
+ if (CSBase >= HoleBase) {
+ CSBase += _4GB_RJ16 - HoleBase;
+ }
+
+ CSBase += (UINT32)1 << (21 - 16); // Add 2MB offset to avoid compat area.
+ if ((CSBase >= (MCT_TRNG_KEEPOUT_START >> 8)) && (CSBase <= (MCT_TRNG_KEEPOUT_END >> 8))) {
+ CSBase += (((MCT_TRNG_KEEPOUT_END >> 8) - CSBase) + 0x0F) & 0xFFFFFFF0;
+ }
+
+ if (MCTPtr->Status[SbHWHole]) {
+ if (MCTPtr->Status[SbSWNodeHole]) {
+ LibAmdMsrRead (TOP_MEM, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+ if ((CSBase >= (SMsr.lo >> 16)) && (CSBase < _4GB_RJ16)) {
+ return FALSE;
+ }
+ }
+ }
+
+ BottomUma = NBPtr->RefPtr->Sub4GCacheTop >> 16;
+ if (BottomUma && (CSBase >= BottomUma) && (CSBase < _4GB_RJ16)) {
+ return FALSE;
+ }
+ *AddrPtr = CSBase;
+ return TRUE;
+ }
+ return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determines if a Rank is enabled.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Receiver - Receiver to check
+ * @return - FALSE
+ *
+ */
+
+BOOLEAN
+MemNRankEnabledNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Receiver
+ )
+{
+ UINT32 CSBase;
+ CSBase = MemNGetBitFieldNb (NBPtr, BFCSBaseAddr0Reg + Receiver);
+ if (CSBase & 1) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets the EccSymbolSize bit depending upon configurations
+ * and system override.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSetEccSymbolSizeNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT16 X4DimmsOnly;
+ BOOLEAN Size;
+ DIE_STRUCT *MCTPtr;
+ DCT_STRUCT *DCTPtr;
+
+ ASSERT (NBPtr != NULL);
+
+ MCTPtr = NBPtr->MCTPtr;
+ DCTPtr = NBPtr->DCTPtr;
+
+ // Determine if this node has only x4 DRAM parts
+ X4DimmsOnly = (UINT16) ((!(DCTPtr->Timings.Dimmx8Present | DCTPtr->Timings.Dimmx16Present)) && DCTPtr->Timings.Dimmx4Present);
+ //
+ // Check if EccSymbolSize BKDG value is overridden
+ //
+ if (UserOptions.CfgEccSymbolSize != ECCSYMBOLSIZE_USE_BKDG) {
+ Size = (UserOptions.CfgEccSymbolSize == ECCSYMBOLSIZE_FORCE_X4) ? FALSE : TRUE;
+ } else {
+ if (X4DimmsOnly && MCTPtr->GangedMode) {
+ Size = FALSE;
+ } else {
+ Size = TRUE;
+ }
+ NBPtr->FamilySpecificHook[ForceEccSymbolSize] (NBPtr, &Size);
+ }
+ IDS_OPTION_HOOK (IDS_ECCSYMBOLSIZE, &Size, &(NBPtr->MemPtr->StdHeader));
+ MemNSetBitFieldNb (NBPtr, BFEccSymbolSize, (UINT32) Size);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ * This function flushes the training pattern
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Address - System Address [47:16]
+ * @param[in] ClCount - Number of cache lines
+ *
+ */
+
+VOID
+MemNFlushPatternNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ )
+{
+ // Due to speculative execution during MemUReadCachelines, we must
+ // flush one more cache line than we read.
+ MemUProcIOClFlush (Address, ClCount + 1, NBPtr->MemPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function compares test pattern with data in buffer and
+ * return a pass/fail bitmap for 8 bytelanes (upper 8 bits are reserved)
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Buffer[] - Buffer data from DRAM (Measured data from DRAM) to compare
+ * @param[in] Pattern[] - Pattern (Expected data in ROM/CACHE) to compare against
+ * @param[in] ByteCount - Byte count
+ *
+ * @return PASS - Bitmap of results of comparison
+ */
+
+UINT16
+MemNCompareTestPatternNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT16 ByteCount
+ )
+{
+ UINT16 i;
+ UINT16 Pass;
+ UINT8 ColumnCount;
+ UINT8 FailingBitMask[8];
+
+ ASSERT ((ByteCount == 18 * 64) || (ByteCount == 9 * 64) || (ByteCount == 64 * 64) || (ByteCount == 32 * 64) || (ByteCount == 3 * 64));
+
+ ColumnCount = NBPtr->ChannelPtr->ColumnCount;
+ Pass = 0xFFFF;
+ //
+ // Clear Failing Bit Mask
+ //
+ for (i = 0; i < sizeof (FailingBitMask); i++) {
+ FailingBitMask[i] = 0;
+ }
+
+ if (NBPtr->Ganged && (NBPtr->Dct != 0)) {
+ i = 8; // DCT 1 in ganged mode
+ } else {
+ i = 0;
+ }
+
+ for (; i < ByteCount; i++) {
+ if (Buffer[i] != Pattern[i]) {
+ // if bytelane n fails
+ Pass &= ~((UINT16)1 << (i % 8)); // clear bit n
+ FailingBitMask[i % NBPtr->TechPtr->MaxByteLanes ()] |= (Buffer[i] ^ Pattern[i]);
+ }
+
+ if (NBPtr->Ganged && ((i & 7) == 7)) {
+ i += 8; // if ganged, skip over other Channel's Data
+ }
+ }
+ //
+ // Accumulate Failing bit data
+ //
+ for (i = 0; i < sizeof (FailingBitMask); i++) {
+ NBPtr->ChannelPtr->FailingBitMask[(ColumnCount * NBPtr->TechPtr->ChipSel) + i] &=
+ FailingBitMask[i];
+ }
+
+ return Pass;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function compares test pattern with data in buffer and
+ * return a pass/fail bitmap for 8 bytelanes (upper 8 bits are reserved)
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Buffer[] - Buffer data from DRAM (Measured data from DRAM) to compare
+ * @param[in] Pattern[] - Pattern (Expected data in ROM/CACHE) to compare against
+ * @param[in] ByteCount - Byte count
+ *
+ * @retval PASS - Bitmap of results of comparison
+ * ----------------------------------------------------------------------------
+ */
+UINT16
+MemNInsDlyCompareTestPatternNb (
+ IN MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT16 ByteCount
+ )
+{
+ UINT16 i;
+ UINT16 Pass;
+ UINT16 BeatOffset;
+ UINT16 BeatCnt;
+ UINT8 ColumnCount;
+ UINT8 FailingBitMask[8];
+
+ ASSERT ((ByteCount == 18 * 64) || (ByteCount == 9 * 64) || (ByteCount == 64 * 64) || (ByteCount == 32 * 64) || (ByteCount == 3 * 64));
+
+ ColumnCount = NBPtr->ChannelPtr->ColumnCount;
+ Pass = 0xFFFF;
+ //
+ // Clear Failing Bit Mask
+ //
+ for (i = 0; i < sizeof (FailingBitMask); i++) {
+ FailingBitMask[i] = 0;
+ }
+
+ if (NBPtr->Ganged && (NBPtr->Dct != 0)) {
+ i = 8; // DCT 1 in ganged mode
+ } else {
+ i = 0;
+ }
+
+ if (NBPtr->Ganged) {
+ BeatOffset = 16;
+ } else {
+ BeatOffset = 8;
+ }
+
+ BeatCnt = 0;
+ for (; i < ByteCount; i++) {
+
+ if (Buffer[i] != Pattern[i + BeatOffset]) {
+ // if bytelane n fails
+ Pass &= ~((UINT16)1 << (i % 8)); // clear bit n
+ FailingBitMask[i % NBPtr->TechPtr->MaxByteLanes ()] |= (Buffer[i] ^ Pattern[i + BeatOffset]);
+ }
+
+ if ((i & 7) == 7) {
+ if (NBPtr->Ganged) {
+ i += 8; // if ganged, skip over other Channel's Data
+ }
+ BeatCnt++;
+ }
+
+ if ((BeatCnt & 3) == 3) {
+ // Skip last data beat of a 4-beat burst.
+ BeatCnt++;
+ i = i + BeatOffset;
+ }
+ }
+ //
+ // Accumulate Failing bit data
+ //
+ for (i = 0; i < sizeof (FailingBitMask); i++) {
+ NBPtr->ChannelPtr->FailingBitMask[(ColumnCount * NBPtr->TechPtr->ChipSel) + i] &=
+ FailingBitMask[i];
+ }
+
+ return Pass;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the training control flow for UNB
+ * The DDR3 mode bit must be set prior to calling this function
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ */
+BOOLEAN
+MemNTrainingFlowUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ memNTrainFlowControl[DDR3_TRAIN_FLOW] (NBPtr);
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the ECC exclusion range for UNB
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNSetEccExclusionRangeUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_PARAMETER_STRUCT *RefPtr;
+ RefPtr = NBPtr->RefPtr;
+
+ NBPtr->SetBitField (NBPtr, BFECCExclusionBaseLow, (RefPtr->UmaBase << 16) | 1);
+ NBPtr->SetBitField (NBPtr, BFECCExclusionBaseHigh, RefPtr->UmaBase >> 16);
+ NBPtr->SetBitField (NBPtr, BFECCExclusionLimitLow, ((RefPtr->UmaBase + RefPtr->UmaSize) << 16) - 1);
+ NBPtr->SetBitField (NBPtr, BFECCExclusionLimitHigh, (RefPtr->UmaBase + RefPtr->UmaSize - 1) >> 16);
+}
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnS3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnS3.c
new file mode 100644
index 0000000..9ffde28
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnS3.c
@@ -0,0 +1,949 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnS3.c
+ *
+ * Common Northbridge S3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "S3.h"
+#include "mfs3.h"
+#include "cpuFamilyTranslation.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+#define FILECODE PROC_MEM_NB_MNS3_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+STATIC
+MemNS3GetSetBitField (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN BOOLEAN IsSet,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+UINT16
+STATIC
+MemNS3GetMemClkFreqUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 FreqId
+ );
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function executes the S3 resume for a node on a UNB
+ *
+ * @param[in,out] *S3NBPtr - Pointer to the S3_MEM_NB_BLOCK
+ * @param[in] NodeID - The Node id of the target die
+ *
+ * @return BOOLEAN
+ * TRUE - This is the correct constructor for the targeted node.
+ * FALSE - This isn't the correct constructor for the targeted node.
+ */
+BOOLEAN
+MemNS3ResumeUNb (
+ IN OUT S3_MEM_NB_BLOCK *S3NBPtr,
+ IN UINT8 NodeID
+ )
+{
+ UINT8 DCT;
+ MEM_NB_BLOCK *NBPtr;
+ MEM_DATA_STRUCT *MemPtr;
+
+ NBPtr = S3NBPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+
+ // Errata before S3 resume sequence
+
+ // Add a hook here
+ AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader);
+ if (AgesaHookBeforeExitSelfRefresh (0, MemPtr) == AGESA_SUCCESS) {
+ }
+ AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader);
+
+ //Override the NB Pstate if needed
+ IDS_OPTION_HOOK (IDS_NB_PSTATE_DIDVID, S3NBPtr->NBPtr, &MemPtr->StdHeader);
+ // Set F2x[1,0]90[ExitSelfRef]
+ // Wait for F2x[1,0]90[ExitSelfRef]=0
+ for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) {
+ MemNSwitchDCTNb (NBPtr, DCT);
+ if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) {
+ MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1);
+ MemNSetBitFieldNb (NBPtr, BFExitSelfRef, 1);
+ while (MemNGetBitFieldNb (NBPtr, BFExitSelfRef) != 0) {}
+ if (NBPtr->IsSupported[SetDllShutDown]) {
+ MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0);
+ }
+ }
+ }
+
+ // Errata After S3 resume sequence
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function reads register bitfield
+ *
+ * @param[in] AccessWidth - Access width of the register
+ * @param[in] Address - address of the CSR register in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value be read.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+MemNS3GetBitFieldNb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ MemNS3GetSetBitField (AccessWidth, Address, FALSE, Value, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function writes register bitfield
+ *
+ * @param[in] AccessWidth - Access width of the register
+ * @param[in] Address - address of the CSR register in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value to be written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+MemNS3SetBitFieldNb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ MemNS3GetSetBitField (AccessWidth, Address, TRUE, Value, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function restores scrubber base register
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Node - The Node id of the target die
+ *
+ */
+VOID
+MemNS3RestoreScrubNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Node
+ )
+{
+ UINT32 ScrubAddrRJ16;
+
+ ScrubAddrRJ16 = (MemNGetBitFieldNb (NBPtr, BFDramBaseReg0 + Node) & 0xFFFF0000) >> 8;
+ ScrubAddrRJ16 |= MemNGetBitFieldNb (NBPtr, BFDramBaseHiReg0 + Node) << 24;
+ MemNSetBitFieldNb (NBPtr, BFScrubAddrLoReg, ScrubAddrRJ16 << 16);
+ MemNSetBitFieldNb (NBPtr, BFScrubAddrHiReg, ScrubAddrRJ16 >> 16);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function retores Pre Driver Calibration with pre driver calibration code
+ * code valid bit set.
+ *
+ * @param[in] AccessWidth - Access width of the register.
+ * @param[in] Address - address in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value to be written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+MemNS3SetPreDriverCalUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT16 RegValue;
+
+ RegValue = 0x8000 | *(UINT16 *) Value;
+ MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function is used by families that use a separate DctCfgSel bit to
+ * select the current DCT which will be accessed by function 2.
+ * NOTE: This function must be called BEFORE the NBPtr->Dct variable is
+ * updated.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Dct - Pointer to ID of the target DCT
+ *
+ */
+
+BOOLEAN
+MemNS3DctCfgSelectUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *Dct
+ )
+{
+ // Set the DctCfgSel to new DCT
+ //
+ MemNSetBitFieldNb (NBPtr, BFDctCfgSel, *(UINT8*)Dct);
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function write to a register that has one copy for each NB Pstate
+ *
+ * @param[in] AccessWidth - Access width of the register
+ * @param[in] Address - address of the CSR register in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value be read.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+MemNS3GetNBPStateDepRegUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT8 NBPstate;
+ UINT8 TempValue;
+ UINT8 Dct;
+ UINT32 Temp;
+
+ Temp = Address.Address.Register;
+ NBPstate = (UINT8) (Temp >> 10);
+ Dct = (UINT8) Address.Address.Function;
+ Temp &= 0x3FF;
+
+ // Switch Dct
+ // Function field contains DCT value
+ Address.Address.Function = FUNC_1;
+ Address.Address.Register = 0x10C;
+ LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+ TempValue = (TempValue & 0xC8) | ((NBPstate << 4) | Dct);
+ LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+
+ Address.Address.Function = FUNC_2;
+ Address.Address.Register = Temp;
+ LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr);
+
+ Address.Address.Function = FUNC_1;
+ Address.Address.Register = 0x10C;
+ TempValue = 0;
+ LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function write to a register that has one copy for each NB Pstate
+ *
+ * @param[in] AccessWidth - Access width of the register
+ * @param[in] Address - address of the CSR register in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value be read.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+MemNS3SetNBPStateDepRegUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT8 NBPstate;
+ UINT8 TempValue;
+ UINT8 Dct;
+ UINT32 Temp;
+
+ Temp = Address.Address.Register;
+ NBPstate = (UINT8) (Temp >> 10);
+ Dct = (UINT8) Address.Address.Function;
+ Temp &= 0x3FF;
+
+ // Switch Dct
+ // Function field contains DCT value
+ Address.Address.Function = FUNC_1;
+ Address.Address.Register = 0x10C;
+ LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+ TempValue = (TempValue & 0xCE) | ((NBPstate << 4) | Dct);
+ LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+
+ Address.Address.Function = FUNC_2;
+ Address.Address.Register = Temp;
+ LibAmdPciWrite (AccessWidth, Address, Value, ConfigPtr);
+
+ Address.Address.Function = FUNC_1;
+ Address.Address.Register = 0x10C;
+ TempValue = 0;
+ LibAmdPciWrite (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function read the value of Function 2 PCI register.
+ *
+ * @param[in] AccessWidth - Access width of the register
+ * @param[in] Address - address of the NB register in PCI_ADDR format.
+ * @param[in] *Value - Pointer to the value be read.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+MemNS3SaveNBRegisterUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT8 TempValue;
+ UINT8 Dct;
+ UINT32 Temp;
+
+ Temp = Address.Address.Register;
+ Dct = (UINT8) Address.Address.Function;
+
+ // Switch Dct
+ // Function field contains DCT value
+ Address.Address.Function = FUNC_1;
+ Address.Address.Register = 0x10C;
+ LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+ TempValue = (TempValue & 0xFE) | Dct;
+ LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+
+ Address.Address.Register = Temp;
+ Address.Address.Function = FUNC_2;
+ LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function set the value of Function 2 PCI register.
+ *
+ * @param[in] AccessWidth - Access width of the register
+ * @param[in] Address - address of the NB register in PCI_ADDR format.
+ * @param[in] *Value - Pointer to the value be write.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+MemNS3RestoreNBRegisterUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT8 TempValue;
+ UINT8 Dct;
+ UINT32 Temp;
+
+ Temp = Address.Address.Register;
+ Dct = (UINT8) Address.Address.Function;
+
+ // Switch Dct
+ // Function field contains DCT value
+ Address.Address.Function = FUNC_1;
+ Address.Address.Register = 0x10C;
+ LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+ TempValue = (TempValue & 0xFE) | Dct;
+ LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr);
+
+ Address.Address.Register = Temp;
+ Address.Address.Function = FUNC_2;
+ LibAmdPciWrite (AccessWidth, Address, Value, ConfigPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets MemClkFreqVal bit.
+ *
+ * @param[in] AccessWidth - Access width of the register.
+ * @param[in] Address - address in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value to be written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+MemNS3SetMemClkFreqValUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT32 TempValue;
+
+ // 1. Program MemClkFreqVal = 1
+ MemNS3SaveNBRegisterUnb (AccessWidth, Address, &TempValue, ConfigPtr);
+ TempValue |= 0x80;
+ MemNS3RestoreNBRegisterUnb (AccessWidth, Address, &TempValue, ConfigPtr);
+
+ // 2. Wait for FreqChgInPrg = 0
+ MemNS3SaveNBRegisterUnb (AccessWidth, Address, &TempValue, ConfigPtr);
+ while ((TempValue & 0x200000) != 0) {
+ MemNS3SaveNBRegisterUnb (AccessWidth, Address, &TempValue, ConfigPtr);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function changes memory Pstate context
+ *
+ * @param[in] AccessWidth - Access width of the register.
+ * @param[in] Address - address in PCI_ADDR format. Target MemPState is in
+ * Address.Address.Register.
+ * @param[in, out] *Value - Pointer to the value to be written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNS3ChangeMemPStateContextNb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ LOCATE_HEAP_PTR LocateBufferPtr;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ UINT8 Die;
+
+ IDS_SKIP_HOOK (IDS_BEFORE_S3_SPECIAL, &Address, ConfigPtr) {
+ // See which Node should be accessed
+ Die = (UINT8) (Address.Address.Device - 24);
+
+ LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr;
+ NBPtr = S3NBPtr[Die].NBPtr;
+ MemNChangeMemPStateContextNb (NBPtr, Address.Address.Register);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function forces NBPstate to NBP0
+ *
+ * @param[in] AccessWidth - Access width of the register
+ * @param[in] Address - address of the CSR register in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value be read or written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+MemNS3ForceNBP0Unb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ UINT8 NbPstateMaxVal;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+ MEM_NB_BLOCK *NBPtr;
+ LOCATE_HEAP_PTR LocateBufferPtr;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ BOOLEAN SkipTransToLo;
+ UINT64 MsrValue;
+ UINT64 PerfCtrlSave;
+ UINT64 PerfStsSave;
+
+ IDS_SKIP_HOOK (IDS_BEFORE_S3_SPECIAL, &Address, ConfigPtr) {
+ LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr;
+ NBPtr = S3NBPtr[0].NBPtr;
+
+ // Find out if Current NBPstate is NBPstateLo or not
+ // If yes, skip the steps that transition the Pstate to Lo
+ SkipTransToLo = FALSE;
+ LibAmdMsrRead (MSR_NB_PERF_CTL3, &PerfCtrlSave, &(NBPtr->MemPtr->StdHeader));
+ MsrValue = 0x00000006004004E9;
+ LibAmdMsrRead (MSR_NB_PERF_CTR3, &PerfStsSave, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMsrWrite (MSR_NB_PERF_CTL3, &MsrValue, &(NBPtr->MemPtr->StdHeader));
+ MsrValue = 0;
+ LibAmdMsrWrite (MSR_NB_PERF_CTR3, &MsrValue, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMsrRead (MSR_NB_PERF_CTR3, &MsrValue, &(NBPtr->MemPtr->StdHeader));
+ if (MsrValue != 0) {
+ SkipTransToLo = TRUE;
+ }
+ LibAmdMsrWrite (MSR_NB_PERF_CTL3, &PerfCtrlSave, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMsrWrite (MSR_NB_PERF_CTR3, &PerfStsSave, &(NBPtr->MemPtr->StdHeader));
+
+ if (MemNGetBitFieldNb (NBPtr, BFCurNbPstate) != 0) {
+
+ NBPtr->NbPsCtlReg = MemNGetBitFieldNb (NBPtr, BFNbPstateCtlReg);
+
+ // If current NBPstate is already in NBPstateLo, do not do transition to NBPstateLo.
+ if (!SkipTransToLo) {
+ // 2.Program D18F5x170 to transition the NB P-state:
+ // NbPstateLo = NbPstateMaxVal. (HW requires an intermediate transition to low)
+ // SwNbPstateLoDis = NbPstateDisOnP0 = NbPstateThreshold = 0.
+ NbPstateMaxVal = (UINT8) MemNGetBitFieldNb (NBPtr, BFNbPstateMaxVal);
+ MemNSetBitFieldNb (NBPtr, BFNbPstateLo, NbPstateMaxVal);
+ MemNSetBitFieldNb (NBPtr, BFNbPstateCtlReg, MemNGetBitFieldNb (NBPtr, BFNbPstateCtlReg) & 0xFFFF91FF);
+ // 3.Wait for D18F5x174[CurNbPstate] to equal NbPstateLo.
+ while (MemNGetBitFieldNb (NBPtr, BFCurNbPstate) != NbPstateMaxVal) {}
+ }
+ // 4.Program D18F5x170 to force the NB P-state:
+ // NbPstateHi = target NB P-state.
+ // SwNbPstateLoDis = 1 (triggers the transition)
+ MemNSetBitFieldNb (NBPtr, BFNbPstateHi, 0);
+ MemNSetBitFieldNb (NBPtr, BFSwNbPstateLoDis, 1);
+ // 5.Wait for D18F5x174[CurNbPstate] to equal the target NB P-state.
+ while (MemNGetBitFieldNb (NBPtr, BFCurNbPstate) != 0) {}
+
+ // Update TSC rate
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &NBPtr->MemPtr->StdHeader);
+ FamilySpecificServices->GetTscRate (FamilySpecificServices, &NBPtr->MemPtr->TscRate, &NBPtr->MemPtr->StdHeader);
+ }
+ } else {
+ ASSERT (FALSE);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function releases NBPState force
+ *
+ * @param[in] AccessWidth - Access width of the register
+ * @param[in] Address - address of the CSR register in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value be read or written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+MemNS3ReleaseNBPSUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ LOCATE_HEAP_PTR LocateBufferPtr;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+
+ IDS_SKIP_HOOK (IDS_BEFORE_S3_SPECIAL, &Address, ConfigPtr) {
+ LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr;
+ NBPtr = S3NBPtr[0].NBPtr;
+
+ if (NBPtr->NbPsCtlReg != 0) {
+ // 6. Restore the initial D18F5x170[SwNbPstateLoDis, NbPstateDisOnP0] values.
+ MemNSetBitFieldNb (NBPtr, BFNbPstateCtlReg, (MemNGetBitFieldNb (NBPtr, BFNbPstateCtlReg) & 0xFFFF9FFF) | (NBPtr->NbPsCtlReg & 0x6000));
+ // 7. Restore the initial D18F5x170[NbPstateThreshold, NbPstateHi] values.
+ MemNSetBitFieldNb (NBPtr, BFNbPstateCtlReg, (MemNGetBitFieldNb (NBPtr, BFNbPstateCtlReg) & 0xFFFFF13F) | (NBPtr->NbPsCtlReg & 0x0EC0));
+ // 8. Restore the initial D18F5x170[NbPstateLo] values.
+ MemNSetBitFieldNb (NBPtr, BFNbPstateLo, (NBPtr->NbPsCtlReg >> 3) & 3);
+ }
+ } else {
+ ASSERT (FALSE);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function saves hob data into NV Ram.
+ *
+ * @param[in] AccessWidth - Access width of the register.
+ * @param[in] Address - address in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value to be written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+MemNSaveHobDataUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ LOCATE_HEAP_PTR LocateBufferPtr;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ UINT8 Die;
+
+ // See which Node should be accessed
+ Die = (UINT8) (Address.Address.Device - 24);
+
+ if (Die == 0) {
+ // Only do this on first node
+ LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr;
+ NBPtr = S3NBPtr[Die].NBPtr;
+
+ // Only save value when RefPtr is not NULL
+ if (NBPtr->RefPtr != NULL) {
+ if (Address.Address.Function == S3_UMA_SIZE) {
+ *(UINT32 *) Value = NBPtr->RefPtr->UmaSize;
+ } else if (Address.Address.Function == S3_UMA_BASE) {
+ *(UINT32 *) Value = NBPtr->RefPtr->UmaBase;
+ } else if (Address.Address.Function == S3_UMA_MODE) {
+ *(UINT8 *) Value = (UINT8 ) NBPtr->RefPtr->UmaMode;
+ } else if (Address.Address.Function == S3_SUB_4G_CACHE_TOP) {
+ *(UINT32 *) Value = NBPtr->RefPtr->Sub4GCacheTop;
+ } else if (Address.Address.Function == S3_SYSLIMIT) {
+ *(UINT32 *) Value = NBPtr->RefPtr->SysLimit;
+ } else if (Address.Address.Function == S3_UMA_ATTRIBUTE) {
+ LocateBufferPtr.BufferHandle = AMD_UMA_INFO_HANDLE;
+ if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+ *(UINT32 *) Value = ((UMA_INFO *) LocateBufferPtr.BufferPtr)->UmaAttributes;
+ }
+ } else if (Address.Address.Function == S3_VDDIO) {
+ *(UINT8 *) Value = (UINT8) NBPtr->RefPtr->DDR3Voltage;
+ } else {
+ ASSERT (FALSE);
+ }
+ }
+ } else {
+ ASSERT (FALSE);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets hob data from NV Ram.
+ *
+ * @param[in] AccessWidth - Access width of the register.
+ * @param[in] Address - address in PCI_ADDR format.
+ * @param[in, out] *Value - Pointer to the value to be written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+MemNRestoreHobDataUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ LOCATE_HEAP_PTR LocateBufferPtr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ UINT8 Die;
+
+ // See which Node should be accessed
+ Die = (UINT8) (Address.Address.Device - 24);
+
+ if (Die == 0) {
+ // Only do this on first node
+ LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr;
+ NBPtr = S3NBPtr[Die].NBPtr;
+
+ // Only save value when RefPtr is not NULL
+ if (NBPtr->RefPtr != NULL) {
+ if (Address.Address.Function == S3_UMA_SIZE) {
+ NBPtr->RefPtr->UmaSize = *(UINT32 *) Value;
+ } else if (Address.Address.Function == S3_UMA_BASE) {
+ NBPtr->RefPtr->UmaBase = *(UINT32 *) Value;
+ } else if (Address.Address.Function == S3_UMA_MODE) {
+ NBPtr->RefPtr->UmaMode = (UMA_MODE) (*(UINT8 *) Value);
+ } else if (Address.Address.Function == S3_SUB_4G_CACHE_TOP) {
+ NBPtr->RefPtr->Sub4GCacheTop = *(UINT32 *) Value;
+ } else if (Address.Address.Function == S3_SYSLIMIT) {
+ NBPtr->RefPtr->SysLimit = *(UINT32 *) Value;
+ } else if (Address.Address.Function == S3_UMA_ATTRIBUTE) {
+ // Allocate heap for UMA_INFO
+ AllocHeapParams.RequestedBufferSize = sizeof (UMA_INFO);
+ AllocHeapParams.BufferHandle = AMD_UMA_INFO_HANDLE;
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (HeapAllocateBuffer (&AllocHeapParams, ConfigPtr) == AGESA_SUCCESS) {
+ ((UMA_INFO *) AllocHeapParams.BufferPtr)->UmaAttributes = *(UINT32 *) Value;
+ ((UMA_INFO *) AllocHeapParams.BufferPtr)->UmaMode = (UINT8) NBPtr->RefPtr->UmaMode;
+ ((UMA_INFO *) AllocHeapParams.BufferPtr)->UmaBase = (UINT64) ((UINT64) NBPtr->RefPtr->UmaBase << 16);
+ ((UMA_INFO *) AllocHeapParams.BufferPtr)->UmaSize = (NBPtr->RefPtr->UmaSize) << 16;
+ ((UMA_INFO *) AllocHeapParams.BufferPtr)->MemClock = MemNS3GetMemClkFreqUnb (NBPtr, (UINT8) NBPtr->GetBitField (NBPtr, BFMemClkFreq));
+ }
+ } else if (Address.Address.Function == S3_VDDIO) {
+ NBPtr->RefPtr->DDR3Voltage = (DIMM_VOLTAGE) *(UINT8 *) Value;
+ } else {
+ ASSERT (FALSE);
+ }
+ }
+ } else {
+ ASSERT (FALSE);
+ }
+ }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function enables and disables the fixed MTRR modify bit.
+ *
+ * @param[in] MsrAddress - Target MrsAddress
+ * @param[in] *Value - Value to be written
+ * @param[in] *StdHeader - Pointer to standard header
+ */
+VOID
+MemNModdifyMtrrFixDramModEn (
+ IN UINT32 MsrAddress,
+ IN UINT64 *Value,
+ IN VOID *StdHeader
+ )
+{
+ S_UINT64 SMsr;
+ if (MsrAddress == 0) {
+ // turn on modification enable bit for fixed MTRR
+ LibAmdMsrRead (SYS_CFG, (UINT64 *)&SMsr, StdHeader);
+ SMsr.lo |= 0x80000;
+ LibAmdMsrWrite (SYS_CFG, (UINT64 *)&SMsr, StdHeader);
+ } else {
+ // turn off modification enable bit for fixed MTRR
+ LibAmdMsrRead (SYS_CFG, (UINT64 *)&SMsr, StdHeader);
+ SMsr.lo &= ~0x80000;
+ LibAmdMsrWrite (SYS_CFG, (UINT64 *)&SMsr, StdHeader);
+ }
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------*/
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function reads and writes register bitfield
+ *
+ * @param[in] AccessWidth - Access width of the register
+ * @param[in] Address - address of the CSR register in PCI_ADDR format.
+ * @param[in] IsSet - if this is a register read or write
+ * @param[in, out] *Value - Pointer to the value be read or written.
+ * @param[in, out] *ConfigPtr - Pointer to Config handle.
+ * @return none
+ */
+VOID
+STATIC
+MemNS3GetSetBitField (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN BOOLEAN IsSet,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ )
+{
+ BIT_FIELD_NAME BitField;
+ MEM_NB_BLOCK *NBPtr;
+ LOCATE_HEAP_PTR LocateBufferPtr;
+ S3_MEM_NB_BLOCK *S3NBPtr;
+ UINT32 RegValue;
+ UINT8 Die;
+
+ RegValue = 0;
+ // See which Node should be accessed
+ Die = (UINT8) (Address.Address.Device - 24);
+
+ LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE;
+ if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) {
+ S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr;
+ NBPtr = S3NBPtr[Die].NBPtr;
+
+ // Function field contains the DCT number
+ NBPtr->SwitchDCT (NBPtr, (UINT8) Address.Address.Function);
+
+ // Get the bitfield name to be accessed
+ // Register field contains the bitfield name
+ BitField = (BIT_FIELD_NAME) Address.Address.Register;
+
+ if (IsSet) {
+ switch (AccessWidth) {
+ case AccessS3SaveWidth8:
+ RegValue = *(UINT8 *) Value;
+ break;
+ case AccessS3SaveWidth16:
+ RegValue = *(UINT16 *) Value;
+ break;
+ case AccessS3SaveWidth32:
+ RegValue = *(UINT32 *) Value;
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ MemNSetBitFieldNb (NBPtr, BitField, RegValue);
+ } else {
+ RegValue = MemNGetBitFieldNb (NBPtr, BitField);
+
+ switch (AccessWidth) {
+ case AccessS3SaveWidth8:
+ *(UINT8 *) Value = (UINT8) RegValue;
+ break;
+ case AccessS3SaveWidth16:
+ *(UINT16 *) Value = (UINT16) RegValue;
+ break;
+ case AccessS3SaveWidth32:
+ *(UINT32 *) Value = RegValue;
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ }
+ } else {
+ ASSERT (FALSE);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function converts MemClkFreq Id value to MemClk frequency in MHz
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] FreqId - FreqId from Register
+ *
+ * @return MemClk frequency in MHz
+ */
+UINT16
+STATIC
+MemNS3GetMemClkFreqUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 FreqId
+ )
+{
+ UINT16 MemClkFreq;
+ if (FreqId > 2) {
+ MemClkFreq = (FreqId == 14) ? 667 : (300 + ((FreqId - 3) * 33) + (FreqId - 3) / 3);
+ } else if (FreqId == 2) {
+ MemClkFreq = 200;
+ } else {
+ MemClkFreq = 50 + (50 * FreqId);
+ }
+ return MemClkFreq;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mndct.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mndct.c
new file mode 100644
index 0000000..cefa8db
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mndct.c
@@ -0,0 +1,1648 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mndct.c
+ *
+ * Common Northbridge DCT support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 85818 $ @e \$Date: 2013-01-11 17:04:21 -0600 (Fri, 11 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "mftds.h"
+#include "merrhdl.h"
+#include "cpuFamilyTranslation.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_NB_MNDCT_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemNAfterStitchMemNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function combines all the memory into a contiguous map.
+ * Requires that Mask values for each bank be programmed first and that
+ * the chip-select population indicator is correctly set.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - An Error value lower than AGESA_FATAL may have occurred
+ * @return FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred
+ */
+
+BOOLEAN
+MemNStitchMemoryNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ BOOLEAN DSpareEn;
+ UINT32 NxtCSBase;
+ UINT32 CurCSBase;
+ UINT32 CsSize;
+ UINT32 BiggestBank;
+ UINT8 p;
+ UINT8 q;
+ UINT8 BiggestDimm;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ DIE_STRUCT *MCTPtr;
+ DCT_STRUCT *DCTPtr;
+ RefPtr = NBPtr->RefPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ DCTPtr = NBPtr->DCTPtr;
+ DSpareEn = FALSE;
+ if (NBPtr->IsSupported[SetSpareEn]) {
+ DSpareEn = FALSE;
+ if (RefPtr->GStatus[GsbEnDIMMSpareNW]) {
+ DSpareEn = TRUE;
+ }
+ }
+
+ DCTPtr->Timings.CsEnabled = 0;
+ NxtCSBase = 0;
+ for (p = 0; p < MAX_CS_PER_CHANNEL; p++) {
+ BiggestBank = 0;
+ BiggestDimm = 0;
+ for (q = 0; q < MAX_CS_PER_CHANNEL; q++) {
+ if (((DCTPtr->Timings.CsPresent & ~DCTPtr->Timings.CsTestFail) & ((UINT16)1 << q)) != 0) {
+ if ((MemNGetBitFieldNb (NBPtr, BFCSBaseAddr0Reg + q) & 7) == 0) {
+ // (CSEnable|Spare==1)bank is not enabled yet
+ CsSize = MemNGetBitFieldNb (NBPtr, BFCSMask0Reg + (q >> 1));
+ if (CsSize != 0) {
+ CsSize += ((UINT32)1 << 19);
+ CsSize &= 0xFFF80000;
+ }
+ if (CsSize > BiggestBank) {
+ BiggestBank = CsSize;
+ BiggestDimm = q;
+ }
+ }
+ }
+ }
+
+ if (BiggestBank != 0) {
+ CurCSBase = NxtCSBase;
+ if (NBPtr->IsSupported[CheckSpareEn]) {
+ if (DSpareEn) {
+ CurCSBase = ((UINT32)1 << BFSpare);
+ DSpareEn = FALSE;
+ } else {
+ CurCSBase |= ((UINT32)1 << BFCSEnable);
+ NxtCSBase += BiggestBank;
+ }
+ } else {
+ CurCSBase |= ((UINT32)1 << BFCSEnable);
+ NxtCSBase += BiggestBank;
+ }
+ if ((BiggestDimm & 1) != 0) {
+ if (!(MCTPtr->Status[SbLrdimms])) {
+ // For LRDIMMS, On Dimm Mirroring is enabled after SDI
+ if ((DCTPtr->Timings.DimmMirrorPresent & (1 << (BiggestDimm >> 1))) != 0) {
+ CurCSBase |= ((UINT32)1 << BFOnDimmMirror);
+ }
+ }
+ }
+ MemNSetBitFieldNb (NBPtr, BFCSBaseAddr0Reg + BiggestDimm, CurCSBase);
+ DCTPtr->Timings.CsEnabled |= (1 << BiggestDimm);
+ }
+ if ((DCTPtr->Timings.CsTestFail & ((UINT16)1 << p)) != 0) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "Node %d Dct %d exclude CS %d\n", NBPtr->Node, NBPtr->Dct, p);
+ MemNSetBitFieldNb (NBPtr, (BFCSBaseAddr0Reg + p), (UINT32)1 << BFTestFail);
+ }
+ }
+
+ if (NxtCSBase != 0) {
+ DCTPtr->Timings.DctMemSize = NxtCSBase >> 8; // Scale base address from [39:8] to [47:16]
+ MemNAfterStitchMemNb (NBPtr);
+ }
+
+ return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets platform specific config/timing values from the interface layer and
+ * programs them into DCT.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - An Error value lower than AGESA_FATAL may have occurred
+ * @return FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred
+ */
+
+BOOLEAN
+MemNPlatformSpecUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 MemClkDis;
+ UINT8 i;
+ UINT8 MemoryAllClocks;
+ UINT8 *MemClkDisMap;
+ UINT16 CsPresent;
+
+ if (!MemNGetPlatformCfgNb (NBPtr)) {
+ IDS_ERROR_TRAP;
+ }
+
+ if (!NBPtr->PsPtr->MemPDoPs (NBPtr)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tDisable DCT%d due to unsupported DIMM configuration\n", NBPtr->Dct);
+ if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ }
+ NBPtr->DisableDCT (NBPtr);
+ } else {
+
+ MemNProgramPlatformSpecNb (NBPtr);
+ MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_ODT, ALL_DIMMS);
+
+ //======================================================================
+ // Disable unused MemClk to save power
+ //======================================================================
+ //
+ MemClkDis = 0;
+ MemoryAllClocks = UserOptions.CfgMemoryAllClocksOn;
+ IDS_OPTION_HOOK (IDS_ALL_MEMORY_CLOCK, &MemoryAllClocks, &(NBPtr->MemPtr->StdHeader));
+ if (!MemoryAllClocks) {
+ // Special Jedec SPD diagnostic bit - "enable all clocks"
+ if (!NBPtr->MCTPtr->Status[SbDiagClks]) {
+ MemClkDisMap = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MEMCLK_DIS, NBPtr->MCTPtr->SocketId, NBPtr->Dct, 0,
+ &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+ if (MemClkDisMap == NULL) {
+ MemClkDisMap = NBPtr->ChannelPtr->MemClkDisMap;
+ }
+
+ // Turn off unused clocks
+ CsPresent = NBPtr->DCTPtr->Timings.CsPresent;
+
+ for (i = 0; i < 8; i++) {
+ if ((CsPresent & MemClkDisMap[i]) == 0) {
+ MemClkDis |= (UINT8) (1 << i);
+ }
+ }
+
+ // Turn off unused chiplets
+ for (i = 0; i < 3; i++) {
+ if (((MemClkDis >> (i * 2)) & 0x3) == 0x3) {
+ MemNSetBitFieldNb (NBPtr, BFPhyClkConfig0 + i, 0x0010);
+ }
+ }
+ }
+ }
+ MemNSetBitFieldNb (NBPtr, BFMemClkDis, MemClkDis);
+ MemFInitTableDrive (NBPtr, MTAfterPlatformSpec);
+ }
+
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function disables the DCT and mem clock for UNB
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNDisableDCTUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MemNSetBitFieldNb (NBPtr, BFExtendedParityEn, 0);
+ MemNSetBitFieldNb (NBPtr, BFParEn, 0);
+ MemNSetBitFieldNb (NBPtr, BFCKETri, 0x0F);
+
+ //Wait for 24 MEMCLKs
+ MemNWaitXMemClksNb (NBPtr, 24);
+
+ // To maximize power savings when DisDramInterface=1b,
+ // all of the MemClkDis bits should also be set.
+ //
+ MemNSetBitFieldNb (NBPtr, BFMemClkDis, 0xFF);
+
+ MemNSetBitFieldNb (NBPtr, BFDisDramInterface, 1);
+
+ if (NBPtr->Dct == 0) {
+ MemNSetBitFieldNb (NBPtr, BFPhyPSMasterChannel, 0x100);
+ }
+
+ // If channel is disabled after dram init, set DisDllShutdownSR
+ if (MemNGetBitFieldNb (NBPtr, BFDramEnabled) == 1) {
+ MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes the DRAM devices on all DCTs at the same time
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNStartupDCTUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+ UINT16 FinalPllLockTime;
+
+ if (NBPtr->MCTPtr->NodeMemSize != 0) {
+ // Update NB frequency for startup DDR speed
+ NBPtr->ChangeNbFrequency (NBPtr);
+
+ if (!NBPtr->IsSupported[ForcePhyToM0]) {
+ // Program D18F2x[1,0]9C_x0000_000B = 80000000h. #109999.
+ MemNBrdcstSetNb (NBPtr, BFDramPhyStatusReg, 0x80000000);
+
+ // Program D18F2x[1,0]9C_x0D0F_E013[PllRegWaitTime] = 0118h. #194060.
+ MemNBrdcstSetNb (NBPtr, BFPllRegWaitTime, 0x118);
+ }
+
+ // Phy Voltage Level Programming
+ MemNPhyVoltageLevelNb (NBPtr);
+
+ // Run frequency change sequence
+ MemNBrdcstSetNb (NBPtr, BFPllLockTime, NBPtr->FreqChangeParam->PllLockTimeDefault);
+ MemNBrdcstSetNb (NBPtr, BFMemClkFreq, NBPtr->GetMemClkFreqId (NBPtr, NBPtr->DCTPtr->Timings.Speed));
+ NBPtr->FamilySpecificHook[SetSkewMemClk] (NBPtr, NULL);
+ NBPtr->ProgramNbPsDependentRegs (NBPtr);
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if ((NBPtr->DCTPtr->Timings.DctMemSize != 0)) {
+ MemNSetBitFieldNb (NBPtr, BFMemClkFreqVal, 1);
+ MemNPollBitFieldNb (NBPtr, BFFreqChgInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ }
+ }
+ FinalPllLockTime = 0xF;
+ NBPtr->FamilySpecificHook[AfterMemClkFreqVal] (NBPtr, &FinalPllLockTime);
+ if (!NBPtr->IsSupported[CsrPhyPllPdEn]) {
+ // IF (D18F2x[1,0]9C_x0D0F_E00A[CsrPhySrPllPdMode]==0) THEN program
+ // D18F2x[1,0]9C_x0D0F_E006[PllLockTime] = 0Fh
+ MemNBrdcstSetNb (NBPtr, BFPllLockTime, FinalPllLockTime);
+ }
+
+ NBPtr->FamilySpecificHook[BeforePhyFenceTraining] (NBPtr, NBPtr);
+
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+
+ // Phy fence programming
+ AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->PhyFenceTraining (NBPtr);
+
+ // Phy compensation initialization
+ AGESA_TESTPOINT (TPProcMemPhyCompensation, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->MemNInitPhyComp (NBPtr);
+ MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_SLEWRATE, ALL_DIMMS);
+ }
+ }
+
+ AGESA_TESTPOINT (TpProcMemBeforeDramInit, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->MemNBeforeDramInitNb (NBPtr);
+
+ AGESA_TESTPOINT (TpProcMemDramInit, &(NBPtr->MemPtr->StdHeader));
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nMemClkFreq: %d MHz\n", NBPtr->DCTPtr->Timings.Speed);
+ NBPtr->FeatPtr->DramInit (NBPtr->TechPtr);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function ramp up frequency to target frequency
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemNRampUpFrequencyUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+ DIE_STRUCT *MCTPtr;
+
+ MCTPtr = NBPtr->MCTPtr;
+
+ // Do not change frequency when it is already at TargetSpeed
+ if (NBPtr->DCTPtr->Timings.Speed == NBPtr->DCTPtr->Timings.TargetSpeed) {
+ return TRUE;
+ }
+
+ // BIOS must program both DCTs to the same frequency.
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nMemClkFreq changed: %d MHz", NBPtr->DCTPtr->Timings.Speed);
+ for (Dct = 0; Dct < MCTPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ NBPtr->DCTPtr->Timings.Speed = NBPtr->DCTPtr->Timings.TargetSpeed;
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, " -> %d MHz", NBPtr->DCTPtr->Timings.TargetSpeed);
+
+ NBPtr->ChangeFrequency (NBPtr);
+
+ return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function uses calculated values from DCT.Timings structure to
+ * program its registers for UNB
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNProgramCycTimingsUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ CONST CTENTRY TmgAdjTab[] = {
+ // BitField, Min, Max, Bias, Ratio_x2
+ {BFTcl, 5, 14, 0, 2},
+ {BFTrcd, 2, 19, 0, 2},
+ {BFTrp, 2, 19, 0, 2},
+ {BFTrtp, 4, 10, 0, 2},
+ {BFTras, 8, 40, 0, 2},
+ {BFTrc, 10, 56, 0, 2},
+ {BFTwrDDR3, 5, 16, 0, 2},
+ {BFTrrd, 4, 9, 0, 2},
+ {BFTwtr, 4, 9, 0, 2},
+ {BFFourActWindow, 6, 42, 0, 2}
+ };
+
+ DCT_STRUCT *DCTPtr;
+ UINT8 *MiniMaxTmg;
+ UINT8 *MiniMaxTrfc;
+ UINT8 Value8;
+ UINT8 j;
+ UINT8 Tcwl;
+ UINT8 RdOdtTrnOnDly;
+ BIT_FIELD_NAME BitField;
+ MEM_PARAMETER_STRUCT *RefPtr;
+
+ DCTPtr = NBPtr->DCTPtr;
+ RefPtr = NBPtr->RefPtr;
+ //======================================================================
+ // Program DRAM Timing values
+ //======================================================================
+ //
+ MiniMaxTmg = &DCTPtr->Timings.CasL;
+ for (j = 0; j < GET_SIZE_OF (TmgAdjTab); j++) {
+ BitField = TmgAdjTab[j].BitField;
+
+ if (BitField == BFTrp) {
+ if (NBPtr->IsSupported[AdjustTrp]) {
+ MiniMaxTmg[j] ++;
+ if (MiniMaxTmg[j] < 5) {
+ MiniMaxTmg[j] = 5;
+ }
+ }
+ }
+
+ if (MiniMaxTmg[j] < TmgAdjTab[j].Min) {
+ MiniMaxTmg[j] = TmgAdjTab[j].Min;
+ } else if (MiniMaxTmg[j] > TmgAdjTab[j].Max) {
+ MiniMaxTmg[j] = TmgAdjTab[j].Max;
+ }
+
+ Value8 = (UINT8) MiniMaxTmg[j];
+
+ if (BitField == BFTwrDDR3) {
+ if ((Value8 > 8) && ((Value8 & 1) != 0)) {
+ Value8++;
+ }
+ }
+
+ MemNSetBitFieldNb (NBPtr, BitField, Value8);
+ }
+
+ MiniMaxTrfc = &DCTPtr->Timings.Trfc0;
+ for (j = 0; j < 4; j++) {
+ if ((NBPtr->DCTPtr->Timings.DctDimmValid & (1 << j)) != 0) {
+ ASSERT (MiniMaxTrfc[j] <= 4);
+ MemNSetBitFieldNb (NBPtr, BFTrfc0 + j, MiniMaxTrfc[j]);
+ }
+ }
+
+ Tcwl = (UINT8) (DCTPtr->Timings.Speed / 133) + 2;
+ Tcwl = (Tcwl > 5) ? Tcwl : 5;
+ MemNSetBitFieldNb (NBPtr, BFTcwl, Tcwl);
+
+ if (RefPtr->DramDoubleRefreshRate) {
+ MemNSetBitFieldNb (NBPtr, BFTref, 3); // 3.9 us
+ } else {
+ MemNSetBitFieldNb (NBPtr, BFTref, 2); // 7.8 us
+ }
+
+ RdOdtTrnOnDly = (DCTPtr->Timings.CasL > Tcwl) ? (DCTPtr->Timings.CasL - Tcwl) : 0;
+ MemNSetBitFieldNb (NBPtr, BFRdOdtTrnOnDly, RdOdtTrnOnDly);
+ NBPtr->FamilySpecificHook[ProgOdtControl] (NBPtr, NULL);
+
+ //
+ // Program Tmod
+ //
+ MemNSetBitFieldNb (NBPtr, BFTmod, (DCTPtr->Timings.Speed < DDR1866_FREQUENCY) ? 0x0C :
+ (DCTPtr->Timings.Speed > DDR1866_FREQUENCY) ? 0x10 : 0x0E);
+ //
+ // Program Tzqcs and Tzqoper
+ //
+ // Tzqcs max(64nCK, 80ns)
+ MemNSetBitFieldNb (NBPtr, BFTzqcs, MIN (6, (MAX (64, MemUnsToMemClk (NBPtr->DCTPtr->Timings.Speed, 80)) + 15) / 16));
+ // Tzqoper max(256nCK, 320ns)
+ MemNSetBitFieldNb (NBPtr, BFTzqoper, MIN (0xC, (MAX (256, MemUnsToMemClk (NBPtr->DCTPtr->Timings.Speed, 320)) + 31) / 32));
+
+ // Program power management timing
+ MemNDramPowerMngTimingNb (NBPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets platform specific settings for the current channel
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - All platform types defined have initialized successfully
+ * @return FALSE - At least one of the platform types gave not been initialized successfully
+ */
+
+BOOLEAN
+MemNGetPlatformCfgNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 p;
+
+ for (p = 0; p < MAX_PLATFORM_TYPES; p++) {
+ ASSERT (NBPtr->MemPtr->GetPlatformCfg[p] != NULL);
+ if (NBPtr->MemPtr->GetPlatformCfg[p] (NBPtr->MemPtr, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr) == AGESA_SUCCESS) {
+ break;
+ }
+ }
+ return (p < MAX_PLATFORM_TYPES);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sends the ZQCL command
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSendZQCmdNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ // 1.Program MrsAddress[10]=1
+ MemNSetBitFieldNb (NBPtr, BFMrsAddress, (UINT32)1 << 10);
+
+ // 2.Set SendZQCmd=1
+ MemNSetBitFieldNb (NBPtr, BFSendZQCmd, 1);
+
+ // 3.Wait for SendZQCmd=0
+ MemNPollBitFieldNb (NBPtr, BFSendZQCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+
+ // 4.Wait 512 MEMCLKs
+ MemNWaitXMemClksNb (NBPtr, 512);
+}
+
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function is used to create the DRAM map
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ */
+
+VOID
+STATIC
+MemNAfterStitchMemNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ if (NBPtr->MCTPtr->GangedMode) {
+ NBPtr->MCTPtr->NodeMemSize = NBPtr->DCTPtr->Timings.DctMemSize;
+ NBPtr->MCTPtr->NodeSysLimit = NBPtr->MCTPtr->NodeMemSize - 1;
+ NBPtr->MCTPtr->DctData[1].Timings.CsPresent = NBPtr->DCTPtr->Timings.CsPresent;
+ NBPtr->MCTPtr->DctData[1].Timings.CsEnabled = NBPtr->DCTPtr->Timings.CsEnabled;
+ NBPtr->MCTPtr->DctData[1].Timings.DctMemSize = NBPtr->DCTPtr->Timings.DctMemSize;
+ } else {
+ // In unganged mode, add DCT0 and DCT1 to NodeMemSize
+ NBPtr->MCTPtr->NodeMemSize += NBPtr->DCTPtr->Timings.DctMemSize;
+ NBPtr->MCTPtr->NodeSysLimit = NBPtr->MCTPtr->NodeMemSize - 1;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function swaps bits for OnDimmMirror support for Unb
+ *
+ * Dimm Mirroring Requires that, during MRS command cycles, the following
+ * bits are swapped by software
+ *
+ * A3 -> A4 A7 -> A8
+ * A4 -> A3 BA0 -> BA1
+ * A5 -> A6 BA1 -> BA0
+ * A6 -> A5
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSwapBitsUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 ChipSel;
+ UINT32 MRSBank;
+ UINT32 MRSAddr;
+
+ ChipSel = (UINT8) MemNGetBitFieldNb (NBPtr, BFMrsChipSel);
+ if ((ChipSel & 1) != 0) {
+ if ((NBPtr->DCTPtr->Timings.DimmMirrorPresent & (1 << (ChipSel >> 1))) != 0) {
+ MRSBank = MemNGetBitFieldNb (NBPtr, BFMrsBank);
+ MRSAddr = MemNGetBitFieldNb (NBPtr, BFMrsAddress);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS%d MR%d %05x swapped to ->",
+ (ChipSel & 0x7),
+ (MRSBank & 0x7),
+ (MRSAddr & 0x3FFFF));
+ //
+ // Swap Mrs Bank bits 0 with 1
+ MRSBank = (MRSBank & 0x0100) | ((MRSBank & 0x01) << 1) | ((MRSBank & 0x02) >> 1);
+ //
+ // Swap Mrs Address bits 3 with 4, 5 with 6, and 7 with 8
+ MRSAddr = (MRSAddr & 0x03FE07) | ((MRSAddr&0x000A8) << 1) | ((MRSAddr&0x00150) >> 1);
+ MemNSetBitFieldNb (NBPtr, BFMrsBank, MRSBank);
+ MemNSetBitFieldNb (NBPtr, BFMrsAddress, MRSAddr);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Programs Address/command timings, driver strengths, and tri-state fields.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNProgramPlatformSpecNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ CONST UINT8 PinType[3] = {PSO_CKE_TRI, PSO_ODT_TRI, PSO_CS_TRI};
+ CONST UINT8 TabSize[3] = { 4, 4, 8};
+ CONST BIT_FIELD_NAME BitField[3] = { BFCKETri, BFODTTri, BFChipSelTri};
+ UINT8 *TabPtr;
+ UINT8 i;
+ UINT8 k;
+ UINT8 Value;
+ //===================================================================
+ // Tristate unused CKE, ODT and chip select to save power
+ //===================================================================
+ //
+ TabPtr = NULL;
+ for (k = 0; k < sizeof (PinType); k++) {
+ if (NBPtr->IsSupported[CheckFindPSOverideWithSocket]) {
+ TabPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PinType[k], NBPtr->MCTPtr->SocketId, MemNGetSocketRelativeChannelNb (NBPtr, NBPtr->Dct, 0), 0,
+ &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+ }
+ if (NBPtr->IsSupported[CheckFindPSDct]) {
+ TabPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PinType[k], NBPtr->MCTPtr->SocketId, NBPtr->Dct, 0,
+ &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+ }
+ if (TabPtr == NULL) {
+ switch (k) {
+ case 0:
+ TabPtr = NBPtr->ChannelPtr->CKETriMap;
+ break;
+ case 1:
+ TabPtr = NBPtr->ChannelPtr->ODTTriMap;
+ break;
+ case 2:
+ TabPtr = NBPtr->ChannelPtr->ChipSelTriMap;
+ break;
+ default:
+ IDS_ERROR_TRAP;
+ }
+ }
+ ASSERT (TabPtr != NULL);
+
+ Value = 0;
+ for (i = 0; i < TabSize[k]; i++) {
+ if ((NBPtr->DCTPtr->Timings.CsPresent & TabPtr[i]) == 0) {
+ Value |= (UINT8) (1 << i);
+ }
+ }
+
+ if (k == PSO_CS_TRI) {
+ NBPtr->FamilySpecificHook[BeforeSetCsTri] (NBPtr, &Value);
+ }
+
+ ASSERT (k < GET_SIZE_OF (BitField));
+ MemNSetBitFieldNb (NBPtr, BitField[k], Value);
+ }
+ NBPtr->MemNBeforePlatformSpecNb (NBPtr);
+
+ //===================================================================
+ // Program Address/Command timings and driver strength
+ //===================================================================
+ //
+ MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_ADDRTMG, ALL_DIMMS);
+ MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_ODCCONTROL, ALL_DIMMS);
+
+ MemNSetBitFieldNb (NBPtr, BFSlowAccessMode, (NBPtr->ChannelPtr->SlowMode) ? 1 : 0);
+ NBPtr->FamilySpecificHook[ProgramPOdtOff] (NBPtr, &NBPtr->PsPtr->ProcessorOnDieTerminationOff);
+ MemNSetBitFieldNb (NBPtr, BFODCControl, NBPtr->ChannelPtr->DctOdcCtl);
+ MemNSetBitFieldNb (NBPtr, BFAddrTmgControl, NBPtr->ChannelPtr->DctAddrTmg);
+ NBPtr->FamilySpecificHook[SetDqsODT] (NBPtr, NBPtr);
+
+ if (NBPtr->IsSupported[CheckODTControls]) {
+ MemNSetBitFieldNb (NBPtr, BFPhyRODTCSLow, NBPtr->ChannelPtr->PhyRODTCSLow);
+ MemNSetBitFieldNb (NBPtr, BFPhyRODTCSHigh, NBPtr->ChannelPtr->PhyRODTCSHigh);
+ MemNSetBitFieldNb (NBPtr, BFPhyWODTCSLow, NBPtr->ChannelPtr->PhyWODTCSLow);
+ MemNSetBitFieldNb (NBPtr, BFPhyWODTCSHigh, NBPtr->ChannelPtr->PhyWODTCSHigh);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function enables swapping interleaved region feature.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Base - Swap interleaved region base [47:27]
+ * @param[in] Limit - Swap interleaved region limit [47:27]
+ *
+ */
+VOID
+MemNEnableSwapIntlvRgnNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Base,
+ IN UINT32 Limit
+ )
+{
+ UINT32 Size;
+ UINT32 SizeOfAlign;
+
+ // Swapped interleaving region must be below 16G
+ if (Limit < (1 << (34 - 27))) {
+ // Adjust Base and Size to meet :
+ // 1. The size of the swapped region must be less than or equal to the alignment of F2x10C[IntLvRegionBase].
+ // 2. Entire UMA region is swapped with interleaving region.
+ Size = Limit - Base;
+ SizeOfAlign = (UINT32) 1 << LibAmdBitScanForward (Base);
+ while (SizeOfAlign <= Size) {
+ // In case of SizeOfAlign <= Size, UmaBase -= 128MB, SizeOfIntlvrgn += 128MB.
+ Base -= 1;
+ Size += 1;
+ SizeOfAlign = (UINT32) 1 << LibAmdBitScanForward (Base);
+ }
+ MemNSetBitFieldNb (NBPtr, BFIntLvRgnBaseAddr, Base);
+ MemNSetBitFieldNb (NBPtr, BFIntLvRgnLmtAddr, (Limit - 1));
+ MemNSetBitFieldNb (NBPtr, BFIntLvRgnSize, Size);
+ MemNSetBitFieldNb (NBPtr, BFIntLvRgnSwapEn, 1);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function converts MemClk frequency in MHz to MemClkFreq value
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Speed - MemClk frequency in MHz
+ *
+ * @return MemClkFreq value
+ */
+UINT8
+MemNGetMemClkFreqIdUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT16 Speed
+ )
+{
+ return (UINT8) ((Speed > DDR400_FREQUENCY) ? ((Speed / 33) - 6) : ((Speed == DDR400_FREQUENCY) ? 2 : (Speed / 55)));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function converts MemClkFreq Id value to MemClk frequency in MHz
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] FreqId - FreqId from Register
+ *
+ * @return MemClk frequency in MHz
+ */
+UINT16
+MemNGetMemClkFreqUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 FreqId
+ )
+{
+ UINT16 MemClkFreq;
+ if (FreqId > 2) {
+ MemClkFreq = (FreqId == 14) ? 667 : (300 + ((FreqId - 3) * 33) + (FreqId - 3) / 3);
+ } else if (FreqId == 2) {
+ MemClkFreq = 200;
+ } else {
+ MemClkFreq = 50 + (50 * FreqId);
+ }
+ return MemClkFreq;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function change MemClk frequency to the value that is specified by DCTPtr->Timings.Speed
+ * for UNB.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNChangeFrequencyUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ UINT8 Dct;
+ UINT8 ChipSel;
+ UINT16 FinalPllLockTime;
+ BOOLEAN FrequencyChangeSuccess;
+ UINT64 OrgMMIOCfgBase;
+ UINT64 NewMMIOCfgBase;
+
+ TechPtr = NBPtr->TechPtr;
+
+ // Disable MMIO to prevent speculative DRAM reads during self refresh
+ LibAmdMsrRead (MSR_MMIO_Cfg_Base, &OrgMMIOCfgBase, &(NBPtr->MemPtr->StdHeader));
+ NewMMIOCfgBase = OrgMMIOCfgBase & (~(BIT0));
+ LibAmdMsrWrite (MSR_MMIO_Cfg_Base, &NewMMIOCfgBase, &(NBPtr->MemPtr->StdHeader));
+
+ MemNBrdcstSetNb (NBPtr, BFDisDllShutdownSR, 1);
+
+ //Program F2x[1,0]90[EnterSelfRefresh]=1.
+ //Wait until the hardware resets F2x[1,0]90[EnterSelfRefresh]=0.
+ MemNBrdcstSetNb (NBPtr, BFEnterSelfRef, 1);
+ MemNPollBitFieldNb (NBPtr, BFEnterSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+
+ if (NBPtr->ChangeNbFrequency (NBPtr)) {
+ // Reprogram Twr, Tcwl, and Tcl based on the new MEMCLK frequency.
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ TechPtr->AutoCycTiming (TechPtr);
+ if (!MemNPlatformSpecUnb (NBPtr)) {
+ IDS_ERROR_TRAP;
+ }
+ }
+ }
+
+ // 1. Program PllLockTime to Family-specific value
+ MemNBrdcstSetNb (NBPtr, BFPllLockTime, NBPtr->FreqChangeParam->PllLockTimeDefault);
+
+ // 2. Program D18F2x[1,0]94[MemClkFreqVal] = 0.
+ MemNBrdcstSetNb (NBPtr, BFMemClkFreqVal, 0);
+
+ // 3. Program D18F2x[1,0]94[MemClkFreq] to the desired DRAM frequency.
+ MemNBrdcstSetNb (NBPtr, BFMemClkFreq, NBPtr->GetMemClkFreqId (NBPtr, NBPtr->DCTPtr->Timings.Speed));
+
+ // 4. Program D18F2x[1,0]F4_x30[DbeGskFifoNumerator] and D18F2x[1,0]F4_x31[DbeGskFifoDenominator].
+ // 5. Program D18F2x[1,0]F4_x32[DataTxFifoSchedDlyNegSlot1, DataTxFifoSchedDlySlot1,
+ // DataTxFifoSchedDlyNegSlot0, DataTxFifoSchedDlySlot0]. See 2.10.3.2.2.1 [DCT Transmit Fifo Schedule
+ // Delay Programming].
+ // 6. D18F2x[1,0]78[RdPtrInit] = IF (D18F2x[1,0]94[MemClkFreq] >= 667 MHz) THEN 7 ELSE 8 ENDIF (Llano)
+ // THEN 2 ELSE 3 ENDIF (Ontario)
+ NBPtr->ProgramNbPsDependentRegs (NBPtr);
+
+ IDS_OPTION_HOOK (IDS_BEFORE_MEM_FREQ_CHG, NBPtr, &(NBPtr->MemPtr->StdHeader));
+ // 7. Program D18F2x[1,0]94[MemClkFreqVal] = 1.
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if ((NBPtr->DCTPtr->Timings.DctMemSize != 0)) {
+ MemNSetBitFieldNb (NBPtr, BFMemClkFreqVal, 1);
+ MemNPollBitFieldNb (NBPtr, BFFreqChgInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ }
+ }
+ FinalPllLockTime = 0xF;
+ NBPtr->FamilySpecificHook[AfterMemClkFreqVal] (NBPtr, &FinalPllLockTime);
+
+ // 8. IF (D18F2x[1,0]9C_x0D0F_E00A[CsrPhySrPllPdMode]==0) THEN program
+ // D18F2x[1,0]9C_x0D0F_E006[PllLockTime] = 0Fh.
+ if (!NBPtr->IsSupported[CsrPhyPllPdEn]) {
+ MemNBrdcstSetNb (NBPtr, BFPllLockTime, FinalPllLockTime);
+ }
+
+ FrequencyChangeSuccess = TRUE;
+ } else {
+ // If NB frequency cannot be updated, use the current speed as the target speed
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ NBPtr->DCTPtr->Timings.Speed = NBPtr->TechPtr->PrevSpeed;
+ NBPtr->DCTPtr->Timings.TargetSpeed = NBPtr->TechPtr->PrevSpeed;
+ }
+ FrequencyChangeSuccess = FALSE;
+ }
+
+ if (FrequencyChangeSuccess) {
+ // Perform Phy Fence training and Phy comp init after frequency change
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+
+ // Phy fence programming
+ AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->PhyFenceTraining (NBPtr);
+
+ // Phy compensation initialization
+ AGESA_TESTPOINT (TPProcMemPhyCompensation, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->MemNInitPhyComp (NBPtr);
+ MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_SLEWRATE, ALL_DIMMS);
+ // Hardware programs POdtOff for the current M-state (D18F2x9C_x0D0F_E006_dct[0][PhyPS]) with the value in D18F2x94_dct[0]
+ // [ProcOdtDis] (via D18F2x9C_x0000_000B_dct[0][ProcOdtDis]) when the memory frequency is updated. BIOS must reprogram this
+ // BIOS must reprogram this field after each frequency change if the target value differs from D18F2x94_dct[0][ProcOdtDis].
+ NBPtr->FamilySpecificHook[ProgramPOdtOff] (NBPtr, &NBPtr->PsPtr->ProcessorOnDieTerminationOff);
+ }
+ }
+ }
+
+ //Program F2x[1,0]90[ExitSelfRef]=1 for both DCTs.
+ //Wait until the hardware resets F2x[1, 0]90[ExitSelfRef]=0.
+ MemNBrdcstSetNb (NBPtr, BFExitSelfRef, 1);
+ MemNPollBitFieldNb (NBPtr, BFExitSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+ if (NBPtr->IsSupported[SetDllShutDown]) {
+ MemNBrdcstSetNb (NBPtr, BFDisDllShutdownSR, 0);
+ }
+
+ if (FrequencyChangeSuccess) {
+ NBPtr->FamilySpecificHook[AfterMemClkFreqChg] (NBPtr, NULL);
+
+ //======================================================================
+ // Calculate and program DRAM Timings at new frequency
+ //======================================================================
+ //
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+ if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) {
+ // if chip select present
+ if (!(TechPtr->TechnologySpecificHook[LrdimmSendAllMRCmds] (TechPtr, &ChipSel))) {
+ TechPtr->SendAllMRCmds (TechPtr, ChipSel);
+ }
+ }
+ }
+ // Wait 512 clocks for DLL-relock
+ MemNWaitXMemClksNb (NBPtr, 512);
+ }
+ }
+ }
+
+ // Restore MMIO setting
+ LibAmdMsrWrite (MSR_MMIO_Cfg_Base, &OrgMMIOCfgBase, &(NBPtr->MemPtr->StdHeader));
+
+ MemFInitTableDrive (NBPtr, MTAfterFreqChg);
+}
+
+/**
+ *
+ *
+ * This function overrides the ASR and SRT value in MRS command
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNSetASRSRTNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT32 MrsAddress;
+ UINT8 Dimm;
+ UINT8 *SpdBufferPtr;
+ BOOLEAN ASREn;
+ BOOLEAN SRTEn;
+
+ // Look for MR2
+ if (NBPtr->GetBitField (NBPtr, BFMrsBank) == 2) {
+ MrsAddress = NBPtr->GetBitField (NBPtr, BFMrsAddress);
+ // Clear A6(ASR) and A7(SRT)
+ MrsAddress &= (UINT32) ~0xC0;
+ if ((NBPtr->ChannelPtr->RegDimmPresent) || (NBPtr->ChannelPtr->LrDimmPresent)) {
+ // For registered dimm and LR dimm, MRS command is sent to all chipselects.
+ // So different ASR/SRT setting can be sent to each chip select.
+ Dimm = (UINT8) (NBPtr->GetBitField (NBPtr, BFMrsChipSel) >> 1);
+ // Make sure we access SPD of the second logical dimm of QR dimm correctly
+ if ((Dimm >= 2) && ((NBPtr->ChannelPtr->DimmQrPresent & (UINT8) (1 << Dimm)) != 0)) {
+ Dimm -= 2;
+ }
+ if (NBPtr->TechPtr->GetDimmSpdBuffer (NBPtr->TechPtr, &SpdBufferPtr, Dimm)) {
+ // Bit 2 is ASR
+ if (SpdBufferPtr[THERMAL_OPT] & 0x4) {
+ // when ASR is 1, set SRT to 0
+ MrsAddress |= 0x40;
+ } else {
+ // Set SRT based on bit on of thermal byte
+ MrsAddress |= ((SpdBufferPtr[THERMAL_OPT] & 1) << 7);
+ }
+ }
+ } else {
+ // Udimm and unbuffered dimm, MSR command will be broadcasted during Dram Init.
+ // ASR/SRT value needs to be leveled across the DCT. Only if all dimms on the DCT
+ // support ASR or SRT can ASR or SRT be enabled.
+ ASREn = TRUE;
+ SRTEn = TRUE;
+ for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm ++) {
+ if (NBPtr->TechPtr->GetDimmSpdBuffer (NBPtr->TechPtr, &SpdBufferPtr, Dimm)) {
+ // Bit 2 is ASR
+ if ((SpdBufferPtr[THERMAL_OPT] & 0x4) == 0) {
+ // when any dimm in the DCT does not support ASR, disable ASR for the DCT
+ ASREn = FALSE;
+ // When any dimm does not have SRT with a value of 1, set SRT to 0 for the DCT
+ if ((SpdBufferPtr[THERMAL_OPT] & 1) == 0) {
+ SRTEn = FALSE;
+ }
+ }
+ }
+ }
+ if (ASREn) {
+ MrsAddress |= 0x40;
+ } else {
+ MrsAddress |= (UINT8) SRTEn << 7;
+ }
+ }
+
+ NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function changes NB frequency foras below:
+ * NBP0-DDR800 -> NBP0-DDR1066 -> ... -> NBP0-DDRTarget -> NBP1-DDRTarget -> NBP2-DDRTarget -> NBP3-DDRTarget -> NBP0-DDRTarget
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+MemNChangeNbFrequencyUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ BOOLEAN Status;
+
+ Status = FALSE;
+
+ // State machine to change NB frequency and NB Pstate
+ switch (NBPtr->NbFreqChgState) {
+ case 0:
+ // Do not change NB Pstate, just to save initial NB Pstate value
+ Status = NBPtr->ChangeNbFrequencyWrap (NBPtr, 0);
+ if (NBPtr->DCTPtr->Timings.Speed == NBPtr->DCTPtr->Timings.TargetSpeed) {
+ // When MemClk has been ramped up to its max, transition to next state, which changes NBPstate to P1
+ NBPtr->NbFreqChgState = 1;
+ IDS_OPTION_HOOK (IDS_NB_PSTATE_DIDVID, NBPtr, &(NBPtr->MemPtr->StdHeader));
+ }
+ break;
+
+ case 1:
+ case 2:
+ case 3:
+ // Change NB P-State to NBP1 for MaxRdLat training
+ if (NBPtr->ChangeNbFrequencyWrap (NBPtr, NBPtr->NbFreqChgState)) {
+ // Next state is to try all NBPstates
+ NBPtr->NbFreqChgState++;
+
+ // Return TRUE to repeat MaxRdLat training
+ Status = TRUE;
+ } else {
+ // If transition to any NBPs fails, transition to exit state machine
+ NBPtr->NbFreqChgState = 4;
+ }
+ break;
+
+ case 4:
+ // Change NB P-State back to NBP0
+ Status = NBPtr->ChangeNbFrequencyWrap (NBPtr, 0);
+ ASSERT (Status);
+
+ // Return FALSE to get out of MaxRdLat training loop
+ Status = FALSE;
+
+ // Exit state machine
+ NBPtr->NbFreqChgState = 5;
+ break;
+
+ default:
+ break;
+ }
+
+ return Status;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets "Dram Term" value from data structure for Unb
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] ChipSel - Targeted chipsel
+ *
+ * @return Dram Term value
+ */
+UINT8
+MemNGetDramTermTblDrvNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 ChipSel
+ )
+{
+ UINT8 RttNom;
+ RttNom = NBPtr->PsPtr->RttNom[ChipSel];
+ IDS_OPTION_HOOK (IDS_MEM_DRAM_TERM, &RttNom, &NBPtr->MemPtr->StdHeader);
+ return RttNom;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets "Dynamic Dram Term" value from data structure
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] ChipSel - Targeted chipsel
+ *
+ * @return Dynamic Dram Term value
+ */
+UINT8
+MemNGetDynDramTermTblDrvNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 ChipSel
+ )
+{
+ UINT8 RttWr;
+ RttWr = NBPtr->PsPtr->RttWr[ChipSel];
+ IDS_OPTION_HOOK (IDS_MEM_DYN_DRAM_TERM, &RttWr, &NBPtr->MemPtr->StdHeader);
+ return RttWr;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns MR0[WR] value
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return MR0[WR] value
+ */
+UINT32
+MemNGetMR0WRTblDrvNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ return (UINT32) (((NBPtr->PsPtr->MR0WR & 0x7) << 9) | ((NBPtr->PsPtr->MR0WR & 0x8) << (13 - 3)));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function returns MR2[CWL] value for UNB
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return MR0[CWL] value
+ */
+UINT32
+MemNGetMR2CWLUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT32 Value32;
+
+ Value32 = (MemNGetBitFieldNb (NBPtr, BFTcwl) - 5) << 3;
+
+ return Value32;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets Txp and Txpdll
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return none
+ */
+VOID
+MemNSetTxpNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ CONST UINT8 Txp[] = {0xFF, 0xFF, 3, 3, 4, 4, 5, 6, 7};
+ CONST UINT8 Txpdll[] = {0xFF, 0xFF, 0xA, 0xA, 0xD, 0x10, 0x14, 0x17, 0x1A};
+ UINT8 i;
+ UINT8 TxpVal;
+ UINT8 TxpdllVal;
+ UINT16 Speed;
+
+ Speed = NBPtr->DCTPtr->Timings.Speed;
+ i = (UINT8) ((Speed < DDR800_FREQUENCY) ? ((Speed / 66) - 3) : (Speed / 133));
+ ASSERT (i < sizeof (Txp));
+ ASSERT (i < sizeof (Txpdll));
+
+ TxpdllVal = Txpdll[i];
+
+ if ((NBPtr->MCTPtr->Status[SbLrdimms] || NBPtr->MCTPtr->Status[SbRegistered]) &&
+ ((NBPtr->DCTPtr->Timings.Speed == DDR667_FREQUENCY) || (NBPtr->DCTPtr->Timings.Speed == DDR800_FREQUENCY)) &&
+ (NBPtr->RefPtr->DDR3Voltage == VOLT1_25)) {
+ TxpVal = 4;
+ } else {
+ TxpVal = Txp[i];
+ }
+
+ if (TxpVal != 0xFF) {
+ MemNSetBitFieldNb (NBPtr, BFTxp, TxpVal);
+ }
+ if (TxpdllVal != 0xFF) {
+ NBPtr->FamilySpecificHook[AdjustTxpdll] (NBPtr, &TxpdllVal);
+ MemNSetBitFieldNb (NBPtr, BFTxpdll, TxpdllVal);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function is a wrapper to handle or switch NB Pstate for UNB
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *NBPstate - NB Pstate
+ *
+ * @return TRUE - Succeed
+ * @return FALSE - Fail
+ */
+
+BOOLEAN
+MemNChangeNbFrequencyWrapUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 NBPstate
+ )
+{
+ BOOLEAN SkipTransToLo;
+ UINT8 TargetNbPs;
+ UINT32 FreqNumeratorInMHz;
+ UINT32 FreqDivisor;
+ UINT32 VoltageInuV;
+ UINT8 NbPstateMaxVal;
+ UINT64 MsrValue;
+ UINT64 PerfCtrlSave;
+ UINT64 PerfStsSave;
+ CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+ SkipTransToLo = FALSE;
+ if (NBPtr->NbFreqChgState == 0) {
+ // While in state 0, keep NB Pstate at the highest supported
+ TargetNbPs = 0;
+ if (NBPtr->NbPsCtlReg == 0) {
+ // Save NbPsCtl register on the first run
+ NBPtr->NbPsCtlReg = MemNGetBitFieldNb (NBPtr, BFNbPstateCtlReg);
+ } else {
+ // Do not need to switch NB Pstate again if it is already at highest
+ return TRUE;
+ }
+
+ // Find out if Current NBPstate is NBPstateLo or not
+ // If yes, skip the steps that transition the Pstate to Lo
+ LibAmdMsrRead (MSR_NB_PERF_CTL3, &PerfCtrlSave, &(NBPtr->MemPtr->StdHeader));
+ MsrValue = 0x00000006004004E9;
+ LibAmdMsrRead (MSR_NB_PERF_CTR3, &PerfStsSave, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMsrWrite (MSR_NB_PERF_CTL3, &MsrValue, &(NBPtr->MemPtr->StdHeader));
+ MsrValue = 0;
+ LibAmdMsrWrite (MSR_NB_PERF_CTR3, &MsrValue, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMsrRead (MSR_NB_PERF_CTR3, &MsrValue, &(NBPtr->MemPtr->StdHeader));
+ if (MsrValue != 0) {
+ SkipTransToLo = TRUE;
+ }
+ LibAmdMsrWrite (MSR_NB_PERF_CTL3, &PerfCtrlSave, &(NBPtr->MemPtr->StdHeader));
+ LibAmdMsrWrite (MSR_NB_PERF_CTR3, &PerfStsSave, &(NBPtr->MemPtr->StdHeader));
+ } else if (NBPtr->NbFreqChgState < 4) {
+ // While in other states, go to the next lower NB Pstate
+ TargetNbPs = (UINT8) MemNGetBitFieldNb (NBPtr, BFCurNbPstate) + 1;
+ if (TargetNbPs == 1) {
+ // Set up intermediate NBPstate
+ NbPstateMaxVal = (UINT8) MemNGetBitFieldNb (NBPtr, BFNbPstateMaxVal);
+ MemNSetBitFieldNb (NBPtr, BFNbPsSel, NbPstateMaxVal);
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &NBPtr->MemPtr->StdHeader);
+ if (FamilySpecificServices->GetNbPstateInfo (FamilySpecificServices,
+ NBPtr->MemPtr->PlatFormConfig,
+ &NBPtr->PciAddr,
+ (UINT32) NbPstateMaxVal,
+ &FreqNumeratorInMHz,
+ &FreqDivisor,
+ &VoltageInuV,
+ &(NBPtr->MemPtr->StdHeader))) {
+ // Get NCLK speed for intermediate NBPstate
+ NBPtr->NBClkFreq = FreqNumeratorInMHz / FreqDivisor;
+ NBPtr->ProgramNbPsDependentRegs (NBPtr);
+ } else {
+ ASSERT (FALSE);
+ }
+ }
+ } else {
+ // When done with training, release NB Pstate force by restoring NbPsCtl register
+ NBPtr->FamilySpecificHook[ReleaseNbPstate] (NBPtr, NBPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tRelease NB Pstate force\n");
+ return TRUE;
+ }
+
+ // Make sure target NB Pstate is enabled, else find next enabled NB Pstate
+ GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &NBPtr->MemPtr->StdHeader);
+ for (; TargetNbPs < 4; TargetNbPs++) {
+ if (FamilySpecificServices->GetNbPstateInfo (FamilySpecificServices,
+ NBPtr->MemPtr->PlatFormConfig,
+ &NBPtr->PciAddr,
+ (UINT32) TargetNbPs,
+ &FreqNumeratorInMHz,
+ &FreqDivisor,
+ &VoltageInuV,
+ &(NBPtr->MemPtr->StdHeader))) {
+ // Record NCLK speed
+ NBPtr->NBClkFreq = FreqNumeratorInMHz / FreqDivisor;
+ break;
+ }
+ }
+
+ if (TargetNbPs < 4) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tNB P%d: %dMHz\n", TargetNbPs, NBPtr->NBClkFreq);
+
+ // 1.Program the configuration registers which contain multiple internal copies for each NB P-state. See
+ // D18F1x10C[NbPsSel].
+ MemNSetBitFieldNb (NBPtr, BFNbPsSel, TargetNbPs);
+
+ /// Check to see if NB P-states have been disabled. @todo This should only be needed for
+ /// bring up, but must be included in any releases that occur before NB P-state operation
+ /// has been debugged/fixed.
+ if ((NBPtr->NbPsCtlReg & 0x00000003) != 0) {
+ NbPstateMaxVal = (UINT8) MemNGetBitFieldNb (NBPtr, BFNbPstateMaxVal);
+ // Set up RdPtrInit before transit to target NBPstate
+ if ((TargetNbPs > 0) && (TargetNbPs != NbPstateMaxVal)) {
+ NBPtr->ProgramNbPsDependentRegs (NBPtr);
+ } else {
+ NBPtr->GetMemClkFreqInCurrentContext (NBPtr);
+ }
+
+ // If current NBPstate is already in NBPstateLo, do not do transition to NBPstateLo.
+ if ((TargetNbPs != 0) || !SkipTransToLo) {
+ // 2.Program D18F5x170 to transition the NB P-state:
+ // NbPstateLo = NbPstateMaxVal. (HW requires an intermediate transition to low)
+ // SwNbPstateLoDis = NbPstateDisOnP0 = NbPstateThreshold = 0.
+ MemNSetBitFieldNb (NBPtr, BFNbPstateLo, NbPstateMaxVal);
+ MemNSetBitFieldNb (NBPtr, BFNbPstateCtlReg, MemNGetBitFieldNb (NBPtr, BFNbPstateCtlReg) & 0xFFFF91FF);
+
+ // 3.Wait for D18F5x174[CurNbPstate] to equal NbPstateLo.
+ MemNPollBitFieldNb (NBPtr, BFCurNbPstate, NbPstateMaxVal, PCI_ACCESS_TIMEOUT, FALSE);
+ }
+ // 4.Program D18F5x170 to force the NB P-state:
+ // NbPstateHi = target NB P-state.
+ // SwNbPstateLoDis = 1 (triggers the transition)
+ MemNSetBitFieldNb (NBPtr, BFNbPstateHi, TargetNbPs);
+ MemNSetBitFieldNb (NBPtr, BFSwNbPstateLoDis, 1);
+
+ // 5.Wait for D18F5x174[CurNbPstate] to equal the target NB P-state.
+ MemNPollBitFieldNb (NBPtr, BFCurNbPstate, TargetNbPs, PCI_ACCESS_TIMEOUT, FALSE);
+ }
+
+ // When NB frequency change succeeds, TSC rate may have changed.
+ // We need to update TSC rate
+ FamilySpecificServices->GetTscRate (FamilySpecificServices, &NBPtr->MemPtr->TscRate, &NBPtr->MemPtr->StdHeader);
+ // Switch MemPstate context if the current MemPstate does not sync with MemPstate context
+ if (MemNGetBitFieldNb (NBPtr, BFCurMemPstate) != MemNGetBitFieldNb (NBPtr, BFMemPsSel)) {
+ MemNChangeMemPStateContextNb (NBPtr, MemNGetBitFieldNb (NBPtr, BFCurMemPstate));
+ }
+ } else {
+ // Cannot find a supported NB Pstate to switch to
+ // Release NB Pstate force by restoring NbPsCtl register
+ NBPtr->FamilySpecificHook[ReleaseNbPstate] (NBPtr, NBPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tRelease NB Pstate force\n");
+ return FALSE;
+ }
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sends an MRS command for Unb
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSendMrsCmdUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 MrsBank;
+ UINT16 MrsBuffer;
+ UINT8 MrsChipSel;
+
+ MemNSetASRSRTNb (NBPtr);
+ MemNSwapBitsUnb (NBPtr);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS%d MR%d %05x\n",
+ (MemNGetBitFieldNb (NBPtr, BFMrsChipSel) & 0x7),
+ (MemNGetBitFieldNb (NBPtr, BFMrsBank) & 0x7),
+ (MemNGetBitFieldNb (NBPtr, BFMrsAddress) & 0x3FFFF));
+
+ // 1.Set SendMrsCmd=1
+ MemNSetBitFieldNb (NBPtr, BFSendMrsCmd, 1);
+
+ // 2.Wait for SendMrsCmd=0
+ MemNPollBitFieldNb (NBPtr, BFSendMrsCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+
+ // Send MRS buffer if memory pstate is supported and enabled
+ if (NBPtr->MemPstateStage != 0) {
+ MrsChipSel = (UINT8) (MemNGetBitFieldNb (NBPtr, BFMrsChipSel) & 0x7);
+ // Only user even rank MRS to set MRS buffer
+ if ((MrsChipSel & 1) == 0) {
+ MrsBank = (UINT8) (MemNGetBitFieldNb (NBPtr, BFMrsBank) & 0x7);
+ MrsBuffer = (UINT16) (MemNGetBitFieldNb (NBPtr, BFMrsAddress) & 0xFFFF);
+ if (MrsBank == 0) {
+ MrsBuffer &= 0xFEFF;
+ MemNSetBitFieldNb (NBPtr, BFMxMr0, MrsBuffer);
+ } else if (MrsBank == 1) {
+ MemNSetBitFieldNb (NBPtr, BFMxMr1, MrsBuffer);
+ } else if (MrsBank == 2) {
+ MemNSetBitFieldNb (NBPtr, BFMxMr2, MrsBuffer);
+ }
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function returns MR0[CL] value with table driven support
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return MR0[CL] value
+ */
+UINT32
+MemNGetMR0CLTblDrvNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ return (UINT32) ((NBPtr->PsPtr->MR0CL31 << 4) | (NBPtr->PsPtr->MR0CL0 << 2));
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function programs dram power management timing related registers
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return none
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNDramPowerMngTimingNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ STATIC CONST UINT8 Tckesr[] = {4, 4, 4, 5, 5, 6, 7, 2, 2};
+ UINT8 Tck;
+
+ // These timings are based on DDR3 spec
+ // Tcksrx = max(5 nCK, 10 ns)
+ Tck = (UINT8) MAX (5, (MemUnsToMemClk (NBPtr->DCTPtr->Timings.Speed, 10)));
+ MemNSetBitFieldNb (NBPtr, BFTcksrx, MIN (0xE, MAX (Tck, 2)));
+
+ // Tcksre = max(5 nCK, 10 ns)
+ MemNSetBitFieldNb (NBPtr, BFTcksre, MIN (0x27, MAX (Tck, 5)));
+
+ // Tckesr = tCKE(min) + 1 nCK
+ // tCKE(min)
+ // DDR-667 7.5ns = 3nCk max(3nCK, 7.5ns) + 1 = 3nCK + 1nCK = 4nCK
+ // DDR-800 7.5ns = 3nCk max(3nCK, 7.5ns) + 1 = 3nCK + 1nCK = 4nCK
+ // DDR-1066 5.625ns = 3nCK max(3nCK, 5.625ns) + 1 = 3nCL + 1nCK = 4nCK
+ // DDR-1333 5.625ns = 4nCK max(3nCK, 4nCK) + 1 = 4nCK + 1nCK = 5nCK
+ // DDR-1600 5ns = 4nCK max(3nCK, 4nCK) + 1 = 4nCK + 1nCK = 5nCK
+ // DDR-1866 5ns = 5nCK max(3nCK, 5nCK) + 1 = 5nCK + 1nCK = 6nCK
+ // DDR-2133 5ns = 6nCK max(3nCK, 6nCK) + 1 = 6nCK + 1nCK = 7nCK
+ ASSERT (((NBPtr->DCTPtr->Timings.Speed / 133) >= 2) && ((NBPtr->DCTPtr->Timings.Speed / 133) <= 10));
+ MemNSetBitFieldNb (NBPtr, BFTckesr, Tckesr[(NBPtr->DCTPtr->Timings.Speed / 133) - 2]);
+
+ // Tpd = tCKE(min)
+ MemNSetBitFieldNb (NBPtr, BFTpd, Tckesr[(NBPtr->DCTPtr->Timings.Speed / 133) - 2] - 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * The function resets Rcv Fifo
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Dummy - Dummy parameter
+ *
+ */
+
+VOID
+MemTResetRcvFifoUnb (
+ IN OUT struct _MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Dummy
+ )
+{
+ // Program D18F2x9C_x0000_0050_dct[1:0]=00000000h
+ MemNSetBitFieldNb (TechPtr->NBPtr, BFRstRcvFifo, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets the memory width
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return Memory width
+ */
+
+UINT32
+MemNGetMemoryWidthUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ DIE_STRUCT *MCTPtr;
+ MEM_SHARED_DATA *SharedPtr;
+
+ MCTPtr = NBPtr->MCTPtr;
+ SharedPtr = NBPtr->SharedPtr;
+
+ return 64 + ((SharedPtr->AllECC && MCTPtr->Status[SbEccDimms]) ? 8 : 0);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function displays AMP voltage values if applicable
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return FALSE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNAmpVoltageDispUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nAMP VDDIO = 1.%dV\n", (NBPtr->RefPtr->AmpVoltage >= AMP_VOLT1_45) ? 50 - 5 * (NBPtr->RefPtr->AmpVoltage >> 4) :
+ 45 + 5 * NBPtr->RefPtr->AmpVoltage);
+
+ // FALSE return to skip normal voltage display if wanted
+ return FALSE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnfeat.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnfeat.c
new file mode 100644
index 0000000..e52c216
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnfeat.c
@@ -0,0 +1,1241 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnfeat.c
+ *
+ * Common Northbridge features
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 84482 $ @e \$Date: 2012-12-16 22:48:10 -0600 (Sun, 16 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "PlatformMemoryConfiguration.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_NB_MNFEAT_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemNGenHwRcvEnReadsUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Address
+ );
+
+VOID
+STATIC
+MemNEnableInfiniteWritePatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+STATIC
+MemNDisableInfiniteWritePatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNInitDqsTrainRcvrEnHwNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNDisableDqsTrainRcvrEnHwNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNInitCPGUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initializes member functions of HW Rx En Training.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNInitDqsTrainRcvrEnHwNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ NBPtr->MemNPrepareRcvrEnDlySeed = MemNPrepareRcvrEnDlySeedNb;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function disables member functions of Hw Rx En Training.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNDisableDqsTrainRcvrEnHwNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ NBPtr->MemNPrepareRcvrEnDlySeed = (VOID (*) (MEM_NB_BLOCK *)) memDefRet;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function calculates RcvEn seed value for each rank
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNPrepareRcvrEnDlySeedNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+ DIE_STRUCT *MCTPtr;
+ UINT16 SeedTotal;
+ UINT16 SeedFine;
+ UINT16 SeedGross;
+ UINT16 SeedPreGross;
+ UINT16 SeedTotalPreScaling;
+ UINT8 ByteLane;
+ UINT16 Speed;
+ UINT16 PlatEst;
+ UINT8 ChipSel;
+ UINT8 Pass;
+ UINT16 *PlatEstSeed;
+ UINT16 SeedValue[9];
+ UINT16 SeedTtl[9];
+ UINT16 SeedPre[9];
+
+ TechPtr = NBPtr->TechPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+ Speed = NBPtr->DCTPtr->Timings.Speed;
+ SeedTotalPreScaling = 0;
+ ChipSel = TechPtr->ChipSel;
+ Pass = TechPtr->Pass;
+
+ for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ TechPtr->Bytelane = ByteLane;
+ if (Pass == 1) {
+ // Get platform override seed
+ PlatEstSeed = (UINT16 *) FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_RXEN_SEED, MCTPtr->SocketId, ChannelPtr->ChannelID, ChipSel >> 1,
+ &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+ // For Pass1, BIOS starts with the delay value obtained from the first pass of write
+ // levelization training that was done in DDR3 Training and add a delay value of 3Bh.
+ PlatEst = 0x3B;
+ NBPtr->FamilySpecificHook[OverrideRcvEnSeed] (NBPtr, &PlatEst);
+ PlatEst = ((PlatEstSeed != NULL) ? PlatEstSeed[ByteLane] : PlatEst);
+ SeedTotal = ChannelPtr->WrDqsDlys[(ChipSel / NBPtr->CsPerDelay) * TechPtr->DlyTableWidth () + ByteLane] + PlatEst;
+ SeedValue[ByteLane] = PlatEst;
+ } else {
+ // For Pass2
+ // SeedTotalPreScaling = (the total delay values in D18F2x[1,0]9C_x0000_00[24:10] from pass 1 of
+ // DQS receiver enable training) - 20h. Subtract 1UI to get back to preamble left edge.
+ if ((((ChipSel & 1) == 0) || (NBPtr->CsPerDelay == 1)) && NBPtr->FamilySpecificHook[TrainingNibbleZero] (NBPtr, &ChipSel)) {
+ // Save Seed for odd CS SeedTotalPreScaling RxEn Value
+ TechPtr->PrevPassRcvEnDly[ByteLane] = ChannelPtr->RcvEnDlys[(ChipSel / NBPtr->CsPerDelay) * TechPtr->DlyTableWidth () + ByteLane];
+ }
+ NBPtr->FamilySpecificHook[OverridePrevPassRcvEnDly] (NBPtr, &TechPtr->PrevPassRcvEnDly[ByteLane]);
+ SeedTotalPreScaling = TechPtr->PrevPassRcvEnDly[ByteLane] - 0x20;
+ // SeedTotal = SeedTotalPreScaling*target frequency/lowest supported frequency.
+ SeedTotal = (UINT16) (((UINT32) SeedTotalPreScaling * Speed) / TechPtr->PrevSpeed);
+ NBPtr->FamilySpecificHook[OverrideRcvEnSeedPassN] (NBPtr, &SeedTotal);
+ }
+ SeedTtl[ByteLane] = SeedTotal;
+
+ // SeedGross = SeedTotal DIV 32.
+ SeedGross = SeedTotal >> 5;
+ // SeedFine = SeedTotal MOD 32.
+ SeedFine = SeedTotal & 0x1F;
+ // Next, determine the gross component of SeedTotal. SeedGrossPass1=SeedTotal DIV 32.
+ // Then, determine the fine delay component of SeedTotal. SeedFinePass1=SeedTotal MOD 32.
+ // Use SeedGrossPass1 to determine SeedPreGrossPass1:
+
+ if ((SeedGross & 0x1) != 0) {
+ //if SeedGross is odd
+ SeedPreGross = 1;
+ } else {
+ //if SeedGross is even
+ SeedPreGross = 2;
+ }
+ // (SeedGross - SeedPreGross)
+ TechPtr->DiffSeedGrossSeedPreGross[ByteLane] = (SeedGross - SeedPreGross) << 5;
+
+ //BIOS programs registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52 with SeedPreGrossPass1
+ //and SeedFinePass1 from the preceding steps.
+
+ NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (ChipSel / NBPtr->CsPerDelay, ByteLane), (SeedPreGross << 5) | SeedFine);
+ SeedPre[ByteLane] = (SeedPreGross << 5) | SeedFine;
+
+ // 202688: Program seed value to RcvEnDly also.
+ NBPtr->FamilySpecificHook[AdjustHwRcvEnSeedGross] (NBPtr, &SeedGross);
+ // Keep seeded value of RcvEnDlys for MaxRdLatency calculation
+ ChannelPtr->RcvEnDlys[(ChipSel / NBPtr->CsPerDelay) * TechPtr->DlyTableWidth () + ByteLane] = (SeedGross << 5) | SeedFine;
+ NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (ChipSel / NBPtr->CsPerDelay, ByteLane), SeedGross << 5);
+ }
+
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ if (Pass == 1) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSeedValue: ");
+ for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", SeedValue[ByteLane]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSeedTotal: ");
+ for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", SeedTtl[ByteLane]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t SeedPRE: ");
+ for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", SeedPre[ByteLane]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ );
+
+ NBPtr->FamilySpecificHook[RegAccessFence] (NBPtr, NULL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Waits specified number of MEMCLKs
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] MemClkCount - Number of MEMCLKs
+ *
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNWaitXMemClksNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 MemClkCount
+ )
+{
+ MemUWait10ns ((MemClkCount * 100 + NBPtr->DCTPtr->Timings.Speed - 1) / NBPtr->DCTPtr->Timings.Speed, NBPtr->MemPtr);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function uses the PRBS generator in the DCT to send a DDR Activate command
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] ChipSelect - Chip select 0-7
+ * @param[in] Bank - Bank Address 0-7
+ * @param[in] RowAddress - Row Address [17:0]
+ *
+ */
+
+VOID
+MemNRrwActivateCmd (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 ChipSelect,
+ IN UINT8 Bank,
+ IN UINT32 RowAddress
+ )
+{
+ // Set Chip select
+ MemNSetBitFieldNb (NBPtr, BFCmdChipSelect, (1 << ChipSelect));
+ // Set Bank Address
+ MemNSetBitFieldNb (NBPtr, BFCmdBank, Bank);
+ // Set Row Address
+ MemNSetBitFieldNb (NBPtr, BFCmdAddress, RowAddress);
+ // Send the command
+ MemNSetBitFieldNb (NBPtr, BFSendActCmd, 1);
+ // Wait for command complete
+ MemNPollBitFieldNb (NBPtr, BFSendActCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ // Wait 75 MEMCLKs
+ NBPtr->WaitXMemClks (NBPtr, 75);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function uses the PRBS generator in the DCT to send a DDR Precharge
+ * or Precharge All command
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] ChipSelect - Chip select 0-7
+ * @param[in] Bank - Bank Address 0-7, PRECHARGE_ALL_BANKS = Precharge All
+ *
+ *
+ */
+
+VOID
+MemNRrwPrechargeCmd (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 ChipSelect,
+ IN UINT8 Bank
+ )
+{
+ // Wait 25 MEMCLKs
+ NBPtr->WaitXMemClks (NBPtr, 25);
+ // Set Chip select
+ NBPtr->SetBitField (NBPtr, BFCmdChipSelect, (1 << ChipSelect));
+ if (Bank == PRECHARGE_ALL_BANKS) {
+ // Set Row Address, bit 10
+ NBPtr->SetBitField (NBPtr, BFCmdAddress, NBPtr->GetBitField (NBPtr, BFCmdAddress) | (1 << 10) );
+ } else {
+ // Clear Row Address, bit 10
+ NBPtr->SetBitField (NBPtr, BFCmdAddress, NBPtr->GetBitField (NBPtr, BFCmdAddress) & (~(1 << 10)) );
+ // Set Bank Address
+ NBPtr->SetBitField (NBPtr, BFCmdBank, Bank);
+ }
+ // Send the command
+ NBPtr->SetBitField (NBPtr, BFSendPchgCmd, 1);
+ // Wait for command complete
+ NBPtr->PollBitField (NBPtr, BFSendPchgCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ // Wait 25 MEMCLKs
+ NBPtr->WaitXMemClks (NBPtr, 25);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function generates a continuous burst of reads for HW RcvEn
+ * training using the Unified Northbridge Reliable Read/Write Engine.
+ *
+ * @param[in,out] NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Address - Unused by this function
+ *
+ */
+VOID
+STATIC
+MemNGenHwRcvEnReadsUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Address
+ )
+{
+ VOID *DummyPtr;
+ DummyPtr = NULL;
+ //
+ // Issue Stream of Reads from the Target Rank
+ //
+ NBPtr->ReadPattern (NBPtr, DummyPtr, 0, NBPtr->TechPtr->PatternLength);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function generates a continuous stream of reads from DRAM using the
+ * Unified Northbridge Reliable Read/Write Engine.
+ *
+ * @param[in,out] NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] Buffer - Unused by this function
+ * @param[in] Address - Unused by this function
+ * @param[in] ClCount - Number of cache lines to read
+ *
+ * Assumptions:
+ *
+ *
+ *
+ */
+
+VOID
+MemNContReadPatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ RRW_SETTINGS *Rrw;
+ UINT8 CmdTgt;
+ UINT8 ChipSel;
+
+ TechPtr = NBPtr->TechPtr;
+ Rrw = &NBPtr->RrwSettings;
+
+ ChipSel = TechPtr->ChipSel;
+ CmdTgt = Rrw->CmdTgt;
+ //
+ // Wait for RRW Engine to be ready and turn it on
+ //
+ NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 1);
+ //
+ // Depending upon the Cmd Target, send Row Activate and set Chipselect
+ // for the Row or Rows that will be used
+ //
+ MemNRrwActivateCmd (NBPtr, ChipSel, Rrw->TgtBankAddressA, Rrw->TgtRowAddressA);
+ NBPtr->SetBitField (NBPtr, BFTgtChipSelectA, ChipSel);
+ if (CmdTgt == CMD_TGT_AB) {
+ MemNRrwActivateCmd (NBPtr, ChipSel, Rrw->TgtBankAddressB, Rrw->TgtRowAddressB);
+ NBPtr->SetBitField (NBPtr, BFTgtChipSelectB, ChipSel);
+ }
+ // Set Comparison Masks
+ NBPtr->SetBitField (NBPtr, BFDramDqMaskLow, Rrw->CompareMaskLow);
+ NBPtr->SetBitField (NBPtr, BFDramDqMaskHigh, Rrw->CompareMaskHigh);
+ //
+ // If All Dimms are ECC Capable Test ECC. Otherwise, mask it off
+ //
+ NBPtr->SetBitField (NBPtr, BFDramEccMask, (NBPtr->MCTPtr->Status[SbEccDimms] == TRUE) ? Rrw->CompareMaskEcc : 0xFF);
+ //
+ // Program the PRBS Seed
+ //
+ NBPtr->SetBitField (NBPtr, BFDataPrbsSeed, Rrw->DataPrbsSeed);
+ //
+ // Set the Command Count
+ //
+ NBPtr->SetBitField (NBPtr, BFCmdCount, ClCount);
+ //
+ // Program the Bubble Count and CmdStreamLen
+ //
+ NBPtr->SetBitField (NBPtr, BFBubbleCnt, 0);
+ NBPtr->SetBitField (NBPtr, BFBubbleCnt2, 0);
+ NBPtr->SetBitField (NBPtr, BFCmdStreamLen, 1);
+ //
+ // Program the Starting Address
+ //
+ NBPtr->SetBitField (NBPtr, BFTgtBankA, Rrw->TgtBankAddressA);
+ NBPtr->SetBitField (NBPtr, BFTgtAddressA, Rrw->TgtColAddressA);
+ if (CmdTgt == CMD_TGT_AB) {
+ NBPtr->SetBitField (NBPtr, BFTgtBankB, Rrw->TgtBankAddressB);
+ NBPtr->SetBitField (NBPtr, BFTgtAddressB, Rrw->TgtColAddressB);
+ }
+ //
+ // Reset All Errors and Disable StopOnErr
+ //
+ NBPtr->SetBitField (NBPtr, BFResetAllErr, 1);
+ NBPtr->SetBitField (NBPtr, BFStopOnErr, 0);
+ //
+ // Program the CmdTarget
+ //
+ NBPtr->SetBitField (NBPtr, BFCmdTgt, CmdTgt);
+ //
+ // Set CmdType to read
+ //
+ NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_READ);
+ //
+ // Start the Commands
+ //
+ AGESA_TESTPOINT (TpProcMemContinPatternGenRead, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+ //
+ // Commands have started, wait for the reads to complete then clear the command
+ //
+ NBPtr->PollBitField (NBPtr, BFTestStatus, 1, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+ //
+ // Send the Precharge All Command
+ //
+ MemNRrwPrechargeCmd (NBPtr, ChipSel, PRECHARGE_ALL_BANKS);
+ //
+ // Turn Off the RRW Engine
+ //
+ NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function generates a continuous stream of writes to DRAM using the
+ * Unified Northbridge Reliable Read/Write Engine.
+ *
+ * @param[in,out] NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] Address - Unused by this function
+ * @param[in] Pattern - Unused by this function
+ * @param[in] ClCount - Number of cache lines to write
+ *
+ */
+
+VOID
+MemNContWritePatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Address,
+ IN UINT8 Pattern[],
+ IN UINT16 ClCount
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ RRW_SETTINGS *Rrw;
+ UINT8 CmdTgt;
+ UINT8 ChipSel;
+
+ TechPtr = NBPtr->TechPtr;
+ Rrw = &NBPtr->RrwSettings;
+
+ ChipSel = TechPtr->ChipSel;
+ CmdTgt = Rrw->CmdTgt;
+ //
+ // Wait for RRW Engine to be ready and turn it on
+ //
+ NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 1);
+ //
+ // Depending upon the Cmd Target, send Row Activate and set Chipselect
+ // for the Row or Rows that will be used
+ //
+ MemNRrwActivateCmd (NBPtr, ChipSel, Rrw->TgtBankAddressA, Rrw->TgtRowAddressA);
+ NBPtr->SetBitField (NBPtr, BFTgtChipSelectA, ChipSel);
+ if (CmdTgt == CMD_TGT_AB) {
+ MemNRrwActivateCmd (NBPtr, ChipSel, Rrw->TgtBankAddressB, Rrw->TgtRowAddressB);
+ NBPtr->SetBitField (NBPtr, BFTgtChipSelectB, ChipSel);
+ }
+ //
+ // Program the PRBS Seed
+ //
+ NBPtr->SetBitField (NBPtr, BFDataPrbsSeed, Rrw->DataPrbsSeed);
+ //
+ // Set the Command Count
+ //
+ NBPtr->SetBitField (NBPtr, BFCmdCount, ClCount);
+ //
+ // Program the Bubble Count and CmdStreamLen
+ //
+ NBPtr->SetBitField (NBPtr, BFBubbleCnt, 0);
+ NBPtr->SetBitField (NBPtr, BFBubbleCnt2, 0);
+ NBPtr->SetBitField (NBPtr, BFCmdStreamLen, 1);
+ //
+ // Program the Starting Address
+ //
+ NBPtr->SetBitField (NBPtr, BFTgtBankA, Rrw->TgtBankAddressA);
+ NBPtr->SetBitField (NBPtr, BFTgtAddressA, Rrw->TgtColAddressA);
+ if (CmdTgt == CMD_TGT_AB) {
+ NBPtr->SetBitField (NBPtr, BFTgtBankB, Rrw->TgtBankAddressB);
+ NBPtr->SetBitField (NBPtr, BFTgtAddressB, Rrw->TgtColAddressB);
+ }
+ //
+ // Program the CmdTarget
+ //
+ NBPtr->SetBitField (NBPtr, BFCmdTgt, CmdTgt);
+ //
+ // Set CmdType to Write
+ //
+ NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_WRITE);
+ //
+ // Start the Commands
+ //
+ AGESA_TESTPOINT (TpProcMemContinPatternGenWrite, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+ //
+ // Commands have started, wait for the writes to complete then clear the command
+ //
+ // Wait for TestStatus = 1 and CmdSendInProg = 0.
+ NBPtr->PollBitField (NBPtr, BFTestStatus, 1, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+ //
+ // Send the Precharge All Command
+ //
+ MemNRrwPrechargeCmd (NBPtr, ChipSel, PRECHARGE_ALL_BANKS);
+ //
+ // Turn Off the RRW Engine
+ //
+ NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function checks the Error status bits for comparison results
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Buffer[] - Not used in this implementation
+ * @param[in] Pattern[] - Not used in this implementation
+ * @param[in] ByteCount - Not used in this implementation
+ *
+ * @return PASS - Bitmap of results of comparison
+ */
+
+UINT16
+MemNCompareTestPatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT16 ByteCount
+ )
+{
+
+
+ UINT16 i;
+ UINT16 Pass;
+ UINT8 ChipSel;
+ UINT8 ColumnCount;
+ UINT8* FailingBitMaskPtr;
+ UINT8 FailingBitMask[9];
+ UINT32 NibbleErrSts;
+
+ ChipSel = NBPtr->TechPtr->ChipSel;
+ ColumnCount = NBPtr->ChannelPtr->ColumnCount;
+ // Calculate Failing Bitmask pointer
+ FailingBitMaskPtr = &(NBPtr->ChannelPtr->FailingBitMask[(ColumnCount * NBPtr->TechPtr->ChipSel)]);
+
+ //
+ // Get Failing bit data
+ //
+ *((UINT32*)FailingBitMask) = NBPtr->GetBitField (NBPtr, BFDQErrLow);
+ *((UINT32*)&FailingBitMask[4]) = NBPtr->GetBitField (NBPtr, BFDQErrHigh);
+ FailingBitMask[8] = (UINT8)NBPtr->GetBitField (NBPtr, BFEccErr);
+
+ Pass = 0x0000;
+ //
+ // Get Comparison Results - Convert Nibble Masks to Byte Masks
+ //
+ NibbleErrSts = NBPtr->GetBitField (NBPtr, BFNibbleErrSts);
+
+ for (i = 0; i < ColumnCount ; i++) {
+ Pass |= ((NibbleErrSts & 0x03) > 0 ) ? (1 << i) : 0;
+ NibbleErrSts >>= 2;
+ FailingBitMaskPtr[i] = FailingBitMask[i];
+ }
+ Pass = ~Pass;
+ return Pass;
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ * This function checks the Error status bits for offset comparison results
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Buffer[] - Buffer data from DRAM (Measured data from DRAM) to compare
+ * @param[in] Pattern[] - Pattern (Expected data in ROM/CACHE) to compare against
+ * @param[in] ByteCount - Byte count
+ *
+ * @retval Bitmap of results of comparison
+ */
+UINT16
+STATIC
+MemNInsDlyCompareTestPatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT16 ByteCount
+ )
+{
+ UINT16 i;
+ UINT16 Pass;
+ UINT8 ColumnCount;
+ UINT32 NibbleErr180Sts;
+
+ ColumnCount = NBPtr->ChannelPtr->ColumnCount;
+ Pass = 0x0000;
+ //
+ // Get Comparison Results - Convert Nibble Masks to Byte Masks
+ //
+ NibbleErr180Sts = NBPtr->GetBitField (NBPtr, BFNibbleErr180Sts);
+
+ for (i = 0; i < ColumnCount ; i++) {
+ Pass |= ((NibbleErr180Sts & 0x03) > 0 ) ? (1 << i) : 0;
+ NibbleErr180Sts >>= 2;
+ }
+ Pass = ~Pass;
+
+ return Pass;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function assigns read/write function pointers to CPG read/write modules.
+ *
+ * @param[in,out] NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNInitCPGUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ NBPtr->WritePattern = MemNContWritePatternUnb;
+ NBPtr->ReadPattern = MemNContReadPatternUnb;
+ NBPtr->GenHwRcvEnReads = MemNGenHwRcvEnReadsUnb;
+ NBPtr->FlushPattern = (VOID (*) (MEM_NB_BLOCK *, UINT32, UINT16)) memDefRet;
+ NBPtr->TrainingPatternInit = (AGESA_STATUS (*) (MEM_NB_BLOCK *)) memDefRetSuccess;
+ NBPtr->TrainingPatternFinalize = (AGESA_STATUS (*) (MEM_NB_BLOCK *)) memDefRetSuccess;
+ NBPtr->CompareTestPattern = MemNCompareTestPatternUnb;
+ NBPtr->InsDlyCompareTestPattern = MemNInsDlyCompareTestPatternUnb;
+ NBPtr->FamilySpecificHook[SetupHwTrainingEngine] = MemNSetupHwTrainingEngineUnb;
+ NBPtr->EnableInfiniteWritePattern = MemNEnableInfiniteWritePatternUnb;
+ NBPtr->DisableInfiniteWritePattern = MemNDisableInfiniteWritePatternUnb;
+ NBPtr->CPGInit = 0;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function generates a continuous stream of writes infinite writes to DRAM using the
+ * Unified Northbridge Reliable Read/Write Engine.
+ *
+ * @param[in,out] NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNEnableInfiniteWritePatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 ByteLane;
+ UINT32 WrDatValue;
+ UINT32 WrDqsValue;
+ MEM_TECH_BLOCK *TechPtr;
+ RRW_SETTINGS *Rrw;
+ UINT8 CmdTgt;
+ UINT8 ChipSel;
+ TechPtr = NBPtr->TechPtr;
+ Rrw = &NBPtr->RrwSettings;
+ ChipSel = TechPtr->ChipSel;
+ CmdTgt = Rrw->CmdTgt;
+
+ // Ensure that DisAutoRefresh and ZqCals are disabled during the use of RRWM
+ if (MemNGetBitFieldNb (NBPtr, BFDisAutoRefresh) == 0) {
+ NBPtr->OrigDisAutoRefreshState = FALSE;
+ MemNSetBitFieldNb (NBPtr, BFDisAutoRefresh, 1);
+ MemNSetBitFieldNb (NBPtr, BFZqcsInterval, 0);
+ } else {
+ NBPtr->OrigDisAutoRefreshState = TRUE;
+ }
+
+ //
+ // Enable I/O Skew mode
+ //
+ for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8) ; ByteLane++) {
+ //Move WrDQS settings from current DIMM to DIMM 0
+ WrDqsValue = NBPtr->ChannelPtr->WrDqsDlys[(NBPtr->TechPtr->ChipSel / NBPtr->CsPerDelay) * NBPtr->TechPtr->DlyTableWidth () + ByteLane];
+ NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (0, ByteLane), (UINT16)WrDqsValue);
+ //Move WrDat settings from current DIMM to DIMM 0
+ WrDatValue = NBPtr->ChannelPtr->WrDatDlys[(NBPtr->TechPtr->ChipSel / NBPtr->CsPerDelay) * NBPtr->TechPtr->DlyTableWidth () + ByteLane];
+ NBPtr->SetTrainDly (NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS (0, ByteLane), (UINT16)WrDatValue);
+ }
+ NBPtr->SetBitField (NBPtr, BFIoSkewMode, 0x0001);
+
+
+ //
+ // Enable PRBS
+ //
+
+ //
+ // Wait for RRW Engine to be ready and turn it on
+ //
+ NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 1);
+ //
+ // Depending upon the Cmd Target, send Row Activate and set Chipselect
+ // for the Row or Rows that will be used
+ //
+ MemNRrwActivateCmd (NBPtr, ChipSel, Rrw->TgtBankAddressA, Rrw->TgtRowAddressA);
+ NBPtr->SetBitField (NBPtr, BFTgtChipSelectA, ChipSel);
+ //
+ // Program the PRBS Seed
+ //
+ NBPtr->SetBitField (NBPtr, BFDataPrbsSeed, Rrw->DataPrbsSeed);
+ //
+ // Set the Command Count
+ //
+ NBPtr->SetBitField (NBPtr, BFCmdCount, 0);
+ //
+ // Program the Bubble Count and CmdStreamLen
+ //
+ NBPtr->SetBitField (NBPtr, BFBubbleCnt, 0);
+ NBPtr->SetBitField (NBPtr, BFBubbleCnt2, 0);
+ NBPtr->SetBitField (NBPtr, BFCmdStreamLen, 1);
+ //
+ // Program the Starting Address
+ //
+ NBPtr->SetBitField (NBPtr, BFTgtBankA, Rrw->TgtBankAddressA);
+ NBPtr->SetBitField (NBPtr, BFTgtAddressA, Rrw->TgtColAddressA);
+ //
+ // Program the CmdTarget
+ //
+ NBPtr->SetBitField (NBPtr, BFCmdTgt, CMD_TGT_A);
+ //
+ // Set CmdType to write
+ //
+ NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_WRITE);
+ //
+ // Start the Commands
+ //
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function disables the infinite stream of writes to DRAM using the
+ * Unified Northbridge Reliable Read/Write Engine.
+ *
+ * @param[in,out] NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNDisableInfiniteWritePatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 ByteLane;
+ UINT32 WrDatValue;
+ UINT32 WrDqsValue;
+ //
+ // Disable PRBS
+ NBPtr->SetBitField (NBPtr, BFCmdCount, 1);
+ //Wait for TestStatus = 1 and CmdSendInProg = 0
+ NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+ //
+ // Disable I/O Skew Mode
+ for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8) ; ByteLane++) {
+ //Move WrDqs settings from DIMM 0 from saved area back to register
+ WrDqsValue = NBPtr->ChannelPtr->WrDqsDlys[0 * NBPtr->TechPtr->DlyTableWidth () + ByteLane];
+ NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (0, ByteLane), (UINT16)WrDqsValue);
+ //Move WrDat settings from DIMM 0 from saved area back to register
+ WrDatValue = NBPtr->ChannelPtr->WrDatDlys[0 * NBPtr->TechPtr->DlyTableWidth () + ByteLane];
+ NBPtr->SetTrainDly (NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS (0, ByteLane), (UINT16)WrDatValue);
+ }
+ NBPtr->SetBitField (NBPtr, BFIoSkewMode, 0x0000);
+ //
+ // Turn Off the RRW Engine
+ //
+ MemNRrwPrechargeCmd (NBPtr, NBPtr->TechPtr->ChipSel, PRECHARGE_ALL_BANKS);
+ NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 0);
+ //
+ // Restore DisAutoRefresh and ZQCals to original state
+ //
+ if (!NBPtr->OrigDisAutoRefreshState) {
+ MemNSetBitFieldNb (NBPtr, BFDisAutoRefresh, 0);
+ MemNSetBitFieldNb (NBPtr, BFZqcsInterval, 2);
+ }
+
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ * This function checks the 180 Error status bits for RD DQS 2D training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Buffer[] - Buffer data from DRAM (Measured data from DRAM) to compare
+ * @param[in] Pattern[] - Pattern (Expected data in ROM/CACHE) to compare against
+ * @param[in] ByteCount - Byte count,
+ *
+ * @retval Bitmap of results of comparison
+ */
+UINT32
+MemN180CompareRdDqs2DPatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT16 ByteCount
+ )
+{
+ return NBPtr->GetBitField (NBPtr, BFNibbleErr180Sts);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function checks the In Phase Error status bits for comparison results for RDDQS 2D training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Buffer[] - Not used in this implementation
+ * @param[in] Pattern[] - Not used in this implementation
+ * @param[in] ByteCount - Not used in this implementation
+ *
+ * @return PASS - Bitmap of results of comparison
+ */
+
+UINT32
+MemNInPhaseCompareRdDqs2DPatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT16 ByteCount
+ )
+{
+ return NBPtr->GetBitField (NBPtr, BFNibbleErrSts);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function starts the Victim for 2D RdDqs Training Continuous Writes
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] SeedCount - Seed count
+ */
+VOID
+MemNStartRdDqs2dVictimContinuousWritesUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 SeedCount
+ )
+{
+ // Program the PRBS Seed
+ NBPtr->SetBitField (NBPtr, BFDataPrbsSeed, NBPtr->GetPrbs2dRdDqsSeed (NBPtr, SeedCount));
+
+ if (NBPtr->IsSupported[OptimizedPatternWrite2D]) {
+ //
+ // Set BankAddress according to seed
+ //
+ NBPtr->SetBitField (NBPtr, BFTgtBankA, (SeedCount * 2) + CPG_BANK_ADDRESS_A);
+ NBPtr->SetBitField (NBPtr, BFTgtBankB, (SeedCount * 2) + CPG_BANK_ADDRESS_B);
+ } else {
+ //
+ // Enable continuous writes on the victim channels
+ //
+ // Set the Command Count
+ NBPtr->SetBitField (NBPtr, BFCmdCount, 256);
+ NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_WRITE);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+ // Wait for TestStatus = 1 and CmdSendInProg = 0.
+ NBPtr->PollBitField (NBPtr, BFTestStatus, 1, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+ }
+ //
+ // Enable continuous reads on the victim channels
+ //
+ // Set the Command Count
+ ASSERT (NBPtr->MaxAggressorDimms[NBPtr->Dct] != 0);
+ NBPtr->SetBitField (NBPtr, BFCmdCount, (256 * NBPtr->RdRolloverMultiple / NBPtr->MaxAggressorDimms[NBPtr->Dct]));
+ // Reset All Errors and Disable StopOnErr
+ NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_READ);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+ // Wait for TestStatus = 1 and CmdSendInProg = 0
+ NBPtr->PollBitField (NBPtr, BFTestStatus, 1, PCI_ACCESS_TIMEOUT, FALSE);
+ //}
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function Initializes the Victim chipSelects for 2D RdDqs Training Continuous Writes
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNInitializeRdDqs2dVictimChipSelContinuousWritesUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ NBPtr->SetBitField (NBPtr, BFTgtChipSelectA, NBPtr->TechPtr->ChipSel);
+ NBPtr->SetBitField (NBPtr, BFTgtChipSelectB, NBPtr->TechPtr->ChipSel);
+ NBPtr->SetBitField (NBPtr, BFResetAllErr, 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finalizes the Victim for 2D RdDqs Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNFinalizeRdDqs2dVictimContinuousWritesUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 InitialCS;
+ UINT8 ChipSel;
+ InitialCS = NBPtr->TechPtr->ChipSel;
+ NBPtr->SetBitField (NBPtr, BFLfsrRollOver, 0);
+ for (ChipSel = InitialCS; ChipSel < (InitialCS + NBPtr->CsPerDelay); ChipSel++) {
+ // Ensure that Odd and Even CS are trained
+ if ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) == 0) {
+ continue;
+ }
+ NBPtr->TechPtr->ChipSel = ChipSel;
+ // Send the Precharge All Command
+ MemNRrwPrechargeCmd (NBPtr, ChipSel, PRECHARGE_ALL_BANKS);
+ }
+ // Turn Off the RRW Engine
+ NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function Initializes the Victim for 2D RdDqs Training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ */
+VOID
+MemNInitializeRdDqs2dVictimContinuousWritesUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ RRW_SETTINGS *Rrw;
+ UINT8 InitialCS;
+ UINT8 ChipSel;
+ UINT8 SeedCount;
+ InitialCS = NBPtr->TechPtr->ChipSel;
+ Rrw = &NBPtr->RrwSettings;
+ // Program the Bubble Count and CmdStreamLen
+ NBPtr->SetBitField (NBPtr, BFBubbleCnt, 32);
+ NBPtr->SetBitField (NBPtr, BFBubbleCnt2, 0);
+ NBPtr->SetBitField (NBPtr, BFCmdStreamLen, 63);
+ // Set Comparison Masks
+ NBPtr->SetBitField (NBPtr, BFDramDqMaskLow, Rrw->CompareMaskLow);
+ NBPtr->SetBitField (NBPtr, BFDramDqMaskHigh, Rrw->CompareMaskHigh);
+ // If All Dimms are ECC Capable Test ECC. Otherwise, mask it off
+ NBPtr->SetBitField (NBPtr, BFDramEccMask, (NBPtr->MCTPtr->Status[SbEccDimms] == TRUE) ? Rrw->CompareMaskEcc : 0xFF);
+ // Program the Starting Address
+ NBPtr->SetBitField (NBPtr, BFTgtBankA, Rrw->TgtBankAddressA);
+ NBPtr->SetBitField (NBPtr, BFTgtAddressA, Rrw->TgtColAddressA);
+ NBPtr->SetBitField (NBPtr, BFTgtBankB, Rrw->TgtBankAddressB);
+ NBPtr->SetBitField (NBPtr, BFTgtAddressB, Rrw->TgtColAddressB);
+ NBPtr->SetBitField (NBPtr, BFCmdTgt, CMD_TGT_AB);
+ // Wait for RRW Engine to be ready and turn it on
+ NBPtr->PollBitField (NBPtr, BFCmdSendInProg, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->SetBitField (NBPtr, BFCmdTestEnable, 1);
+ for (ChipSel = InitialCS; ChipSel < (InitialCS + NBPtr->CsPerDelay); ChipSel++) {
+ // Ensure that Odd and Even CS are trained
+ if ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) == 0) {
+ continue;
+ }
+ NBPtr->TechPtr->ChipSel = ChipSel;
+ for (SeedCount = 0; SeedCount < (NBPtr->IsSupported[OptimizedPatternWrite2D] ? NBPtr->MaxSeedCount : 1 ); SeedCount++) {
+ if (NBPtr->IsSupported[OptimizedPatternWrite2D]) {
+ //
+ // Set BankAddress according to seed
+ //
+ ASSERT (NBPtr->MaxSeedCount <= 4);
+ Rrw->TgtBankAddressA = (SeedCount * 2) + CPG_BANK_ADDRESS_A;
+ Rrw->TgtBankAddressB = (SeedCount * 2) + CPG_BANK_ADDRESS_B;
+ }
+ //
+ // Send ACTIVATE to all Banks
+ //
+ // Set Chip select
+ MemNSetBitFieldNb (NBPtr, BFCmdChipSelect, (1 << NBPtr->TechPtr->ChipSel));
+ // Set Bank Address
+ MemNSetBitFieldNb (NBPtr, BFCmdBank, Rrw->TgtBankAddressA);
+ // Set Row Address
+ MemNSetBitFieldNb (NBPtr, BFCmdAddress, Rrw->TgtRowAddressA);
+ // Send the command
+ MemNSetBitFieldNb (NBPtr, BFSendActCmd, 1);
+ // Wait for command complete
+ MemNPollBitFieldNb (NBPtr, BFSendActCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+ // Set Chip select
+ MemNSetBitFieldNb (NBPtr, BFCmdChipSelect, (1 << NBPtr->TechPtr->ChipSel));
+ // Set Bank Address
+ MemNSetBitFieldNb (NBPtr, BFCmdBank, Rrw->TgtBankAddressB);
+ // Set Row Address
+ MemNSetBitFieldNb (NBPtr, BFCmdAddress, Rrw->TgtRowAddressB);
+ // Send the command
+ MemNSetBitFieldNb (NBPtr, BFSendActCmd, 1);
+ // Wait for command complete
+ MemNPollBitFieldNb (NBPtr, BFSendActCmd, 0, PCI_ACCESS_TIMEOUT, FALSE);
+
+ if (NBPtr->IsSupported[OptimizedPatternWrite2D]) {
+ //
+ // Write the Pattern to the bank pairs for each seed.
+ //
+ MemNInitializeRdDqs2dVictimChipSelContinuousWritesUnb (NBPtr);
+ NBPtr->SetBitField (NBPtr, BFTgtBankA, Rrw->TgtBankAddressA);
+ NBPtr->SetBitField (NBPtr, BFTgtBankB, Rrw->TgtBankAddressB);
+ // Program the PRBS Seed
+ NBPtr->SetBitField (NBPtr, BFDataPrbsSeed, NBPtr->GetPrbs2dRdDqsSeed (NBPtr, SeedCount));
+ //
+ // Enable continuous writes on the victim channels
+ //
+ // Set the Command Count
+ NBPtr->SetBitField (NBPtr, BFCmdCount, 256);
+ NBPtr->SetBitField (NBPtr, BFCmdType, CMD_TYPE_WRITE);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 1);
+ // Wait for TestStatus = 1 and CmdSendInProg = 0.
+ NBPtr->PollBitField (NBPtr, BFTestStatus, 1, PCI_ACCESS_TIMEOUT, FALSE);
+ NBPtr->SetBitField (NBPtr, BFSendCmd, 0);
+ }
+ }
+ }
+ NBPtr->SetBitField (NBPtr, BFLfsrRollOver, 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function enables continuous writes on unused channels
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *SeedCount - seed index
+ *
+ * @return Prbs Seed
+ *
+ */
+
+UINT32
+MemNGetPrbs2dRdDqsSeedUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 SeedCount
+ )
+{
+ UINT32 PrbsSeed;
+ CONST STATIC UINT32 PrbsSeedTbl[4] = {0x7ea05, 0x44443, 0x22b97, 0x3f167};
+ CONST STATIC UINT32 CmdStreamLenTbl[4] = {13, 61, 127, 251};
+ ASSERT (SeedCount <= (NBPtr->MaxSeedCount - 1));
+ NBPtr->SetBitField (NBPtr, BFCmdStreamLen, CmdStreamLenTbl[SeedCount]);
+ PrbsSeed = PrbsSeedTbl[SeedCount];
+ ASSERT (PrbsSeed != 0);
+ return PrbsSeed;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function enables/disables continuous writes on unused agressor channels
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] SeedCount - Seed count
+ * @param[in] TurnOnInfinite - TRUE - Enable Infinite Mode
+ * TurnOnInfinite - FALSE - Disable Infinite Mode
+ *
+ */
+VOID
+MemNAgressorContinuousWritesUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 SeedCount,
+ IN BOOLEAN TurnOnInfinite
+ )
+{
+ UINT8 CurrChipSel;
+ UINT8 CurrDct;
+ UINT8 Dct;
+ UINT32 Address;
+ UINT8 Die;
+ MEM_NB_BLOCK *TargetNBPtr;
+ BOOLEAN SkipContinuous;
+ CurrDct = NBPtr->Dct;
+ CurrChipSel = NBPtr->TechPtr->ChipSel;
+ SkipContinuous = FALSE;
+ for (Die = 0; Die < NBPtr->NodeCount; Die++) {
+ if (NBPtr->DieEnabled[Die]) {
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ // Make sure that we are not targeting current DCT, current Node
+ if (Die == NBPtr->Node) {
+ if (CurrDct == Dct) {
+ SkipContinuous = TRUE;
+ } else {
+ SkipContinuous = FALSE;
+ }
+ } else {
+ SkipContinuous = FALSE;
+ }
+ // Enable/Disable continuous on aggressors
+ if (SkipContinuous == FALSE) {
+ if (Die == NBPtr->Node) {
+ TargetNBPtr = NBPtr;
+ } else {
+ ASSERT (NBPtr->AdjacentDieNBPtr != NULL);
+ TargetNBPtr = NBPtr->AdjacentDieNBPtr;
+ }
+ // All context switched at this point
+ TargetNBPtr->SwitchDCT (TargetNBPtr, Dct);
+ if (TargetNBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ // Set Targets for agressors
+ TargetNBPtr->TechPtr->ChipSel = TargetNBPtr->CurrentAggressorCSTarget[Dct];
+ TargetNBPtr->GetSysAddr (TargetNBPtr, TargetNBPtr->TechPtr->ChipSel, &Address);
+ TargetNBPtr->RrwSettings.DataPrbsSeed = TargetNBPtr->GetPrbs2dRdDqsSeed (TargetNBPtr, 0);
+ if (TurnOnInfinite) {
+ // Enable continuous writes on aggressor channels
+ TargetNBPtr->EnableInfiniteWritePattern (TargetNBPtr);
+ } else {
+ // Disable continous writes on aggressor channels
+ TargetNBPtr->DisableInfiniteWritePattern (TargetNBPtr);
+ // Set the next target CS for aggressor channel
+ if (TargetNBPtr->CurrentAggressorCSTarget[Dct] == TargetNBPtr->MaxAggressorCSEnabled[Dct]) {
+ TargetNBPtr->CurrentAggressorCSTarget[Dct] = TargetNBPtr->InitialAggressorCSTarget[Dct];
+ } else {
+ TargetNBPtr->CurrentAggressorCSTarget[Dct] = TargetNBPtr->CurrentAggressorCSTarget[Dct] + TargetNBPtr->CsPerDelay;
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ // Restore Node, DCT and ChipSel
+ NBPtr->TechPtr->ChipSel = CurrChipSel;
+ NBPtr->SwitchDCT (NBPtr, CurrDct);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnflow.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnflow.c
new file mode 100644
index 0000000..2c5cb8d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnflow.c
@@ -0,0 +1,317 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnflow.c
+ *
+ * Common Northbridge initializer flow for MCT and DCT
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_NB_MNFLOW_FILECODE
+/* features */
+#include "mftds.h"
+
+extern MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[];
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemNInitDCTNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+STATIC
+MemNCleanupDctRegsNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+STATIC
+MemNGetPORFreqLimitTblDrvNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function programs the MCT with initial values
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - AGESA_FATAL error did not occur (it is possible to have an Error that is not AGESA_SUCCESS)
+ * @return FALSE - AGESA_FATAL error occurred
+ */
+
+BOOLEAN
+MemNInitMCTNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ UINT8 Dct;
+ BOOLEAN Flag;
+ ID_INFO CallOutIdInfo;
+
+ TechPtr = NBPtr->TechPtr;
+ // Switch Tech functions for Nb
+ NBPtr->TechBlockSwitch (NBPtr);
+ // Start Memory controller initialization sequence
+ Flag = FALSE;
+ if (TechPtr->DimmPresence (TechPtr)) {
+ AGESA_TESTPOINT (TpProcMemPlatformSpecificInit, &(NBPtr->MemPtr->StdHeader));
+ if (NBPtr->MemNPlatformSpecificFormFactorInitNb (NBPtr)) {
+ AGESA_TESTPOINT (TpProcMemSpdTiming, &(NBPtr->MemPtr->StdHeader));
+ if (TechPtr->SpdCalcWidth (TechPtr)) {
+ AGESA_TESTPOINT (TpProcMemSpeedTclConfig, &(NBPtr->MemPtr->StdHeader));
+ if (TechPtr->SpdGetTargetSpeed (TechPtr)) {
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+
+ Flag |= MemNInitDCTNb (NBPtr);
+ }
+
+ if (Flag && !NBPtr->IsSupported[TwoStageDramInit] && (NBPtr->MCTPtr->ErrCode != AGESA_FATAL)) {
+ MemFInitTableDrive (NBPtr, MTBeforeDInit);
+ AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeDramInit, &(NBPtr->MemPtr->StdHeader));
+ IDS_PERF_TIMESTAMP (TP_BEGINAGESAHOOKBEFOREDRAMINIT, &(NBPtr->MemPtr->StdHeader));
+ CallOutIdInfo.IdField.SocketId = NBPtr->MCTPtr->SocketId;
+ CallOutIdInfo.IdField.ModuleId = NBPtr->MCTPtr->DieId;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nCalling out to Platform BIOS on Socket %d Module %d...\n", CallOutIdInfo.IdField.SocketId, CallOutIdInfo.IdField.ModuleId);
+ AgesaHookBeforeDramInit ((UINTN) CallOutIdInfo.IdInformation, NBPtr->MemPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nVDDIO = 1.%dV\n", (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) ? 5 :
+ (NBPtr->RefPtr->DDR3Voltage == VOLT1_35) ? 35 :
+ (NBPtr->RefPtr->DDR3Voltage == VOLT1_25) ? 25 : 999);
+ AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeDramInit, &(NBPtr->MemPtr->StdHeader));
+ IDS_PERF_TIMESTAMP (TP_ENDAGESAHOOKBEFOREDRAMINIT, &(NBPtr->MemPtr->StdHeader));
+ IDS_OPTION_HOOK (IDS_BEFORE_DRAM_INIT, NBPtr, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->StartupDCT (NBPtr);
+ }
+ }
+ }
+ }
+ }
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode != AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes the platform specific block for families that support
+ * table driven form factor
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - AGESA_SUCCESS
+ */
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitTblDrvNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Dct;
+
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ NBPtr->PsPtr->MemPDoPs = MemPPSCFlow;
+ NBPtr->PsPtr->MemPGetPORFreqLimit = MemNGetPORFreqLimitTblDrvNb;
+ NBPtr->PsPtr->MemPGetPass1Seeds = MemPGetPSCPass1Seed;
+ }
+
+ return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function programs the DCT with initial values
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - Error did not occur
+ * @return FALSE - Error occurred
+ */
+
+BOOLEAN
+STATIC
+MemNInitDCTNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ TechPtr = NBPtr->TechPtr;
+ TechPtr->SetDramMode (TechPtr);
+
+ if (!NBPtr->MCTPtr->GangedMode || (NBPtr->MCTPtr->Dct == 0)) {
+ if (NBPtr->DCTPtr->Timings.DctDimmValid == 0) {
+ NBPtr->DisableDCT (NBPtr);
+ } else {
+ MemNCleanupDctRegsNb (NBPtr);
+ if (TechPtr->AutoCycTiming (TechPtr)) {
+ if (TechPtr->SpdSetBanks (TechPtr)) {
+ if (NBPtr->StitchMemory (NBPtr)) {
+ // if all dimms on a DCT are disabled, the DCT needs to be disabled.
+ if (NBPtr->DCTPtr->Timings.CsEnabled != 0) {
+ if (NBPtr->AutoConfig (NBPtr)) {
+ if (NBPtr->PlatformSpec (NBPtr)) {
+ return TRUE;
+ }
+ }
+ } else {
+ NBPtr->DisableDCT (NBPtr);
+ }
+ }
+ }
+ }
+ }
+ }
+ return FALSE;
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ * This function clears DCT registers
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNCleanupDctRegsNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ BIT_FIELD_NAME BitField;
+
+ for (BitField = BFCSBaseAddr0Reg; BitField <= BFCSBaseAddr7Reg; BitField++) {
+ MemNSetBitFieldNb (NBPtr, BitField, 0);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This is function gets the POR speed limit for families supports table driven form factor
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemNGetPORFreqLimitTblDrvNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 i;
+
+ i = 0;
+ while (memPlatSpecFlowArray[i] != NULL) {
+ if ((memPlatSpecFlowArray[i])->MaxFrequency (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ break;
+ }
+ i++;
+ }
+ // Check if there is no table found across CPU families. If so, disable channels.
+ if (memPlatSpecFlowArray[i] == NULL) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nDCT %d: No MaxFreq table. This channel will be disabled.\n", NBPtr->Dct);
+ NBPtr->DCTPtr->Timings.DimmExclude |= NBPtr->DCTPtr->Timings.DctDimmValid;
+ PutEventLog (AGESA_ERROR, MEM_ERROR_UNSUPPORTED_DIMM_CONFIG, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+ // Change target speed to highest value so it won't affect other channels when leveling frequency across the node.
+ NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY;
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnmct.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnmct.c
new file mode 100644
index 0000000..5111754
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnmct.c
@@ -0,0 +1,871 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnmct.c
+ *
+ * Northbridge Common MCT supporting functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "cpuFeatures.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_NB_MNMCT_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define _16MB_RJ16 0x0100
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemNSetMTRRrangeNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Base,
+ IN OUT UINT32 *LimitPtr,
+ IN UINT32 MtrrAddr,
+ IN UINT8 MtrrType
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Get max frequency from OEM platform definition, from
+ * any user override (limiting) of max frequency, and
+ * from any Si Revision Specific information. Return
+ * the least of these three in DIE_STRUCT.Timings.TargetSpeed.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSyncTargetSpeedNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ CONST UINT16 DdrMaxRateTab[] = {
+ UNSUPPORTED_DDR_FREQUENCY,
+ DDR1600_FREQUENCY,
+ DDR1333_FREQUENCY,
+ DDR1066_FREQUENCY,
+ DDR800_FREQUENCY,
+ DDR667_FREQUENCY,
+ DDR533_FREQUENCY,
+ DDR400_FREQUENCY
+ };
+
+ UINT8 Dct;
+ UINT8 Channel;
+ UINT16 MinSpeed;
+ UINT16 DdrMaxRate;
+ UINT32 *ChnlTmgMod;
+ UINT32 Mode[MAX_CHANNELS_PER_SOCKET];
+ UINT32 MemClkFreq;
+ UINT32 ProposedFreq;
+ DCT_STRUCT *DCTPtr;
+
+ ASSERT (NBPtr->DctCount <= sizeof (Mode));
+ MinSpeed = 16000;
+ DdrMaxRate = 16000;
+ if (NBPtr->IsSupported[CheckMaxDramRate]) {
+ // Check maximum DRAM data rate that the processor is designed to support.
+ DdrMaxRate = DdrMaxRateTab[MemNGetBitFieldNb (NBPtr, BFDdrMaxRate)];
+ NBPtr->FamilySpecificHook[GetDdrMaxRate] (NBPtr, &DdrMaxRate);
+ }
+
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ DCTPtr = NBPtr->DCTPtr;
+
+ // Check if input user time mode is valid or not
+ ASSERT ((NBPtr->RefPtr->UserTimingMode == TIMING_MODE_SPECIFIC) ||
+ (NBPtr->RefPtr->UserTimingMode == TIMING_MODE_LIMITED) ||
+ (NBPtr->RefPtr->UserTimingMode == TIMING_MODE_AUTO));
+ Mode[Dct] = NBPtr->RefPtr->UserTimingMode;
+ // Check if input clock value is valid or not
+ ASSERT ((NBPtr->ChannelPtr->TechType == DDR3_TECHNOLOGY) ?
+ (NBPtr->RefPtr->MemClockValue >= DDR667_FREQUENCY) :
+ (NBPtr->RefPtr->MemClockValue <= DDR1066_FREQUENCY));
+ MemClkFreq = NBPtr->RefPtr->MemClockValue;
+ if (DCTPtr->Timings.DctDimmValid != 0) {
+ Channel = MemNGetSocketRelativeChannelNb (NBPtr, Dct, 0);
+ ChnlTmgMod = (UINT32 *) FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_BUS_SPEED, NBPtr->MCTPtr->SocketId, Channel, 0,
+ &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+ if (ChnlTmgMod != NULL) {
+ // Check if input user timing mode is valid or not
+ ASSERT ((ChnlTmgMod[0] == TIMING_MODE_SPECIFIC) || (ChnlTmgMod[0] == TIMING_MODE_LIMITED) ||
+ (ChnlTmgMod[0] != TIMING_MODE_AUTO));
+ if (ChnlTmgMod[0] != TIMING_MODE_AUTO) {
+ Mode[Dct] = ChnlTmgMod[0];
+ // Check if input clock value is valid or not
+ ASSERT ((NBPtr->ChannelPtr->TechType == DDR3_TECHNOLOGY) ?
+ (ChnlTmgMod[1] >= DDR667_FREQUENCY) :
+ (ChnlTmgMod[1] <= DDR1066_FREQUENCY));
+ MemClkFreq = ChnlTmgMod[1];
+ }
+ }
+
+ ProposedFreq = UserOptions.CfgMemoryBusFrequencyLimit;
+ if (Mode[Dct] == TIMING_MODE_LIMITED) {
+ if (MemClkFreq < ProposedFreq) {
+ ProposedFreq = MemClkFreq;
+ }
+ } else if (Mode[Dct] == TIMING_MODE_SPECIFIC) {
+ ProposedFreq = MemClkFreq;
+ }
+
+ if (Mode[Dct] == TIMING_MODE_SPECIFIC) {
+ DCTPtr->Timings.TargetSpeed = (UINT16) ProposedFreq;
+ } else {
+ // "limit" mode
+ if (DCTPtr->Timings.TargetSpeed > ProposedFreq) {
+ DCTPtr->Timings.TargetSpeed = (UINT16) ProposedFreq;
+ }
+ }
+
+ if (DCTPtr->Timings.TargetSpeed > DdrMaxRate) {
+ if (Mode[Dct] == TIMING_MODE_SPECIFIC) {
+ PutEventLog (AGESA_ALERT, MEM_ALERT_USER_TMG_MODE_OVERRULED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ALERT, NBPtr->MCTPtr);
+ }
+ DCTPtr->Timings.TargetSpeed = DdrMaxRate;
+ }
+
+ IDS_SKIP_HOOK (IDS_POR_MEM_FREQ, NBPtr, &NBPtr->MemPtr->StdHeader) {
+ //
+ //Call Platform POR Frequency Override
+ //
+ if (!MemProcessConditionalOverrides (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr, PSO_ACTION_SPEEDLIMIT, ALL_DIMMS)) {
+ //
+ // Get the POR frequency limit
+ //
+ NBPtr->PsPtr->MemPGetPORFreqLimit (NBPtr);
+ }
+ }
+ IDS_OPTION_HOOK (IDS_STRETCH_FREQUENCY_LIMIT, NBPtr, &NBPtr->MemPtr->StdHeader);
+
+ if (MinSpeed > DCTPtr->Timings.TargetSpeed) {
+ MinSpeed = DCTPtr->Timings.TargetSpeed;
+ }
+ }
+ }
+
+ if (MinSpeed == DDR667_FREQUENCY) {
+ NBPtr->StartupSpeed = DDR667_FREQUENCY;
+ }
+
+ // Sync all DCTs to the same speed
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ NBPtr->DCTPtr->Timings.TargetSpeed = MinSpeed;
+ }
+
+ NBPtr->MemNCapSpeedBatteryLife (NBPtr);
+
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * Program system DRAM map to this node
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNSyncAddrMapToAllNodesNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Node;
+ UINT32 NodeSysBase;
+ UINT32 NodeSysLimit;
+ UINT8 WeReMask;
+ MEM_PARAMETER_STRUCT *RefPtr;
+
+ RefPtr = NBPtr->RefPtr;
+ for (Node = 0; Node < NBPtr->NodeCount; Node++) {
+ NodeSysBase = NBPtr->SharedPtr->NodeMap[Node].SysBase;
+ NodeSysLimit = NBPtr->SharedPtr->NodeMap[Node].SysLimit;
+ if (NBPtr->SharedPtr->NodeMap[Node].IsValid) {
+ WeReMask = 3;
+ } else {
+ WeReMask = 0;
+ }
+ // Set the Dram base and set the WE and RE flags in the base.
+ MemNSetBitFieldNb (NBPtr, BFDramBaseReg0 + Node, (NodeSysBase << 8) | WeReMask);
+ MemNSetBitFieldNb (NBPtr, BFDramBaseHiReg0 + Node, NodeSysBase >> 24);
+ // Set the Dram limit and set DstNode.
+ MemNSetBitFieldNb (NBPtr, BFDramLimitReg0 + Node, (NodeSysLimit << 8) | Node);
+ MemNSetBitFieldNb (NBPtr, BFDramLimitHiReg0 + Node, NodeSysLimit >> 24);
+
+ if (RefPtr->GStatus[GsbHWHole]) {
+ MemNSetBitFieldNb (NBPtr, BFDramMemHoistValid, 1);
+ MemNSetBitFieldNb (NBPtr, BFDramHoleBase, (RefPtr->HoleBase >> 8));
+ }
+ }
+
+ NBPtr->FamilySpecificHook[InitExtMMIOAddr] (NBPtr, NULL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function calculates the critical delay difference (CDD)
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] TrnDlyType1 - Type of first Gross Delay parameter
+ * @param[in] TrnDlyType2 - Type of second Gross Delay parameter
+ * @param[in] SameDimm - CDD of same DIMMs
+ * @param[in] DiffDimm - CDD of different DIMMs
+ *
+ * @return CDD term - in 1/2 MEMCLK
+ */
+INT16
+MemNCalcCDDNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN TRN_DLY_TYPE TrnDlyType1,
+ IN TRN_DLY_TYPE TrnDlyType2,
+ IN BOOLEAN SameDimm,
+ IN BOOLEAN DiffDimm
+ )
+{
+ INT16 CDD;
+ INT16 CDDtemp;
+ UINT16 TrnDly1;
+ UINT16 TrnDly2;
+ UINT8 i;
+ UINT8 j;
+ UINT8 ByteLane;
+ UINT16 CsEnabled;
+ BOOLEAN SameDlyType;
+
+ SameDlyType = (BOOLEAN) (TrnDlyType1 == TrnDlyType2);
+ CsEnabled = NBPtr->DCTPtr->Timings.CsEnabled;
+ CDD = -127;
+ // If the two delay types compared are the same type, then no need to compare the same
+ // pair twice. Adjustments are made in the upper bound and lower bound of the loop to
+ // handle this.
+ for (i = 0; i < (SameDlyType ? (NBPtr->CsPerChannel - NBPtr->CsPerDelay) : NBPtr->CsPerChannel); i = i + NBPtr->CsPerDelay) {
+ if ((CsEnabled & ((UINT16) ((NBPtr->CsPerDelay == 2) ? 3 : 1) << i)) != 0) {
+ for (j = SameDlyType ? (i + NBPtr->CsPerDelay) : 0; j < NBPtr->CsPerChannel; j = j + NBPtr->CsPerDelay) {
+ if (((CsEnabled & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << j)) != 0) &&
+ ((SameDimm && ((i / 2) == (j / 2))) || (DiffDimm && ((i / 2) != (j / 2))))) {
+ for (ByteLane = 0; ByteLane < ((NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8); ByteLane++) {
+ /// @todo: Gross delay mask should not be constant.
+ TrnDly1 = GetTrainDlyFromHeapNb (NBPtr, TrnDlyType1, DIMM_BYTE_ACCESS (i / NBPtr->CsPerDelay, ByteLane)) >> 5; // Gross delay only
+ TrnDly2 = GetTrainDlyFromHeapNb (NBPtr, TrnDlyType2, DIMM_BYTE_ACCESS (j / NBPtr->CsPerDelay, ByteLane)) >> 5; // Gross delay only
+
+ CDDtemp = TrnDly1 - TrnDly2;
+ // If the 2 delay types to be compared are the same, then keep the absolute difference
+ if ((SameDlyType) && (CDDtemp < 0)) {
+ CDDtemp = (-CDDtemp);
+ }
+
+ CDD = (CDD < CDDtemp) ? CDDtemp : CDD;
+ }
+ }
+ }
+ }
+ }
+
+ return CDD;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets DQS timing from data saved in heap.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] TrnDlyType - type of delay to be set
+ * @param[in] Drbn - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *
+ * @return value of the target timing.
+ */
+UINT16
+GetTrainDlyFromHeapNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN TRN_DLY_TYPE TrnDlyType,
+ IN DRBN Drbn
+ )
+{
+ UINT8 Dimm;
+ UINT8 Byte;
+ UINT16 TrainDly;
+ CH_DEF_STRUCT *ChannelPtr;
+ MEM_TECH_BLOCK *TechPtr;
+
+ Dimm = DRBN_DIMM (Drbn);
+ Byte = DRBN_BYTE (Drbn);
+ ChannelPtr = NBPtr->ChannelPtr;
+ TechPtr = NBPtr->TechPtr;
+
+ ASSERT (Dimm < (NBPtr->CsPerChannel / NBPtr->CsPerDelay));
+ ASSERT (Byte <= ECC_DLY);
+
+ if (NBPtr->MemPstate == MEMORY_PSTATE1) {
+ switch (TrnDlyType) {
+ case AccessRcvEnDly:
+ TrainDly = ChannelPtr->RcvEnDlysMemPs1[Dimm * TechPtr->DlyTableWidth () + Byte];
+ break;
+ case AccessWrDqsDly:
+ TrainDly = ChannelPtr->WrDqsDlysMemPs1[Dimm * TechPtr->DlyTableWidth () + Byte];
+ break;
+ case AccessWrDatDly:
+ TrainDly = ChannelPtr->WrDatDlysMemPs1[Dimm * TechPtr->DlyTableWidth () + Byte];
+ break;
+ case AccessRdDqsDly:
+ TrainDly = ChannelPtr->RdDqsDlysMemPs1[Dimm * TechPtr->DlyTableWidth () + Byte];
+ break;
+ default:
+ TrainDly = 0;
+ IDS_ERROR_TRAP;
+ }
+ } else {
+ switch (TrnDlyType) {
+ case AccessRcvEnDly:
+ TrainDly = ChannelPtr->RcvEnDlys[Dimm * TechPtr->DlyTableWidth () + Byte];
+ break;
+ case AccessWrDqsDly:
+ TrainDly = ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + Byte];
+ break;
+ case AccessWrDatDly:
+ TrainDly = ChannelPtr->WrDatDlys[Dimm * TechPtr->DlyTableWidth () + Byte];
+ break;
+ case AccessRdDqsDly:
+ TrainDly = ChannelPtr->RdDqsDlys[Dimm * TechPtr->DlyTableWidth () + Byte];
+ break;
+ default:
+ TrainDly = 0;
+ IDS_ERROR_TRAP;
+ }
+ }
+
+ return TrainDly;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets the fixed MTRRs for common legacy ranges.
+ * It sets TOP_MEM and TOM2 and some variable MTRRs with WB Uncacheable type.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - An Error value lower than AGESA_FATAL may have occurred
+ * @return FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred
+ */
+
+BOOLEAN
+MemNCPUMemTypingNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT32 Bottom32bIO;
+ UINT32 Bottom40bIO;
+ UINT32 Cache32bTOP;
+ S_UINT64 SMsr;
+
+ MEM_DATA_STRUCT *MemPtr;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ RefPtr = NBPtr->RefPtr;
+ MemPtr = NBPtr->MemPtr;
+
+ //
+ //======================================================================
+ // Set temporary top of memory from Node structure data.
+ // Adjust temp top of memory down to accommodate 32-bit IO space.
+ //======================================================================
+ //Bottom40bIO=top of memory, right justified 16 bits (defines dram versus IO space type)
+ //Bottom32bIO=sub 4GB top of memory, right justified 16 bits (defines dram versus IO space type)
+ //Cache32bTOP=sub 4GB top of WB cacheable memory, right justified 16 bits
+ //
+ if (RefPtr->HoleBase != 0) {
+ Bottom32bIO = RefPtr->HoleBase;
+ } else if (RefPtr->BottomIo != 0) {
+ Bottom32bIO = (UINT32)RefPtr->BottomIo << (24 - 16);
+ } else {
+ Bottom32bIO = (UINT32)1 << (24 - 16);
+ }
+
+ Cache32bTOP = RefPtr->SysLimit + 1;
+ if (Cache32bTOP < _4GB_RJ16) {
+ Bottom40bIO = 0;
+ if (Bottom32bIO >= Cache32bTOP) {
+ Bottom32bIO = Cache32bTOP;
+ }
+ } else {
+ Bottom40bIO = Cache32bTOP;
+ }
+
+ Cache32bTOP = Bottom32bIO;
+
+
+ //
+ //======================================================================
+ // Set default values for CPU registers
+ //======================================================================
+ //
+ LibAmdMsrRead (SYS_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+ SMsr.lo |= 0x1C0000; // turn on modification enable bit and
+ // mtrr enable bits
+ LibAmdMsrWrite (SYS_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+ SMsr.lo = SMsr.hi = 0x1E1E1E1E;
+ LibAmdMsrWrite (0x250, (UINT64 *)&SMsr, &MemPtr->StdHeader); // 0 - 512K = WB Mem
+ LibAmdMsrWrite (0x258, (UINT64 *)&SMsr, &MemPtr->StdHeader); // 512K - 640K = WB Mem
+
+ //
+ //======================================================================
+ // Set variable MTRR values
+ //======================================================================
+ //
+ MemNSetMTRRrangeNb (NBPtr, 0, &Cache32bTOP, 0x200, 6);
+
+ RefPtr->Sub4GCacheTop = Cache32bTOP << 16;
+
+ //
+ //======================================================================
+ // Set TOP_MEM and TOM2 CPU registers
+ //======================================================================
+ //
+ SMsr.hi = Bottom32bIO >> (32 - 16);
+ SMsr.lo = Bottom32bIO << 16;
+ LibAmdMsrWrite (TOP_MEM, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+ IDS_HDT_CONSOLE (MEM_FLOW, "TOP_MEM: %08x0000\n", Bottom32bIO);
+
+ if (Bottom40bIO) {
+ SMsr.hi = Bottom40bIO >> (32 - 16);
+ SMsr.lo = Bottom40bIO << 16;
+ } else {
+ SMsr.hi = 0;
+ SMsr.lo = 0;
+ }
+ LibAmdMsrWrite (TOP_MEM2, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+ LibAmdMsrRead (SYS_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+ if (Bottom40bIO) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "TOP_MEM2: %08x0000\n", Bottom40bIO);
+ IDS_HDT_CONSOLE (MEM_FLOW, "Sub1THoleBase: %08x0000\n", RefPtr->Sub1THoleBase);
+ // Enable TOM2
+ SMsr.lo |= 0x00600000;
+ } else {
+ // Disable TOM2
+ SMsr.lo &= ~0x00600000;
+ }
+ SMsr.lo &= 0xFFF7FFFF; // turn off modification enable bit
+ LibAmdMsrWrite (SYS_CFG, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function runs on the BSP only, it sets the fixed MTRRs for common legacy ranges.
+ * It sets TOP_MEM and TOM2 and some variable MTRRs with WB Uncacheable type.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNUMAMemTypingNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT32 Bottom32bIO;
+ UINT32 Bottom32bUMA;
+ UINT32 Cache32bTOP;
+ UINT32 Value32;
+ UINT8 BitCount;
+ UINT8 i;
+
+ MEM_PARAMETER_STRUCT *RefPtr;
+ RefPtr = NBPtr->RefPtr;
+ BitCount = 0;
+ //
+ //======================================================================
+ // Adjust temp top of memory down to accommodate UMA memory start
+ //======================================================================
+ // Bottom32bIO=sub 4GB top of memory, right justified 16 bits (defines dram versus IO space type)
+ // Cache32bTOP=sub 4GB top of WB cacheable memory, right justified 16 bits
+ //
+ Bottom32bIO = RefPtr->Sub4GCacheTop >> 16;
+ Bottom32bUMA = RefPtr->UmaBase;
+
+ if (Bottom32bUMA < Bottom32bIO) {
+ Cache32bTOP = Bottom32bUMA;
+ RefPtr->Sub4GCacheTop = Bottom32bUMA << 16;
+ //
+ //======================================================================
+ //Set variable MTRR values
+ //======================================================================
+ //
+ Value32 = Cache32bTOP;
+ //Pre-check the bit count of bottom Uma to see if it is potentially running out of Mtrr while typing.
+ while (Value32 != 0) {
+ i = LibAmdBitScanForward (Value32);
+ Value32 &= ~ (1 << i);
+ BitCount++;
+ }
+
+ if (BitCount > 5) {
+ NBPtr->RefPtr->GStatus[GsbMTRRshort] = TRUE;
+ MemNSetMTRRUmaRegionUCNb (NBPtr, &Cache32bTOP, &Bottom32bIO);
+ } else {
+ MemNSetMTRRrangeNb (NBPtr, 0, &Cache32bTOP, 0x200, 6);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * Program MTRRs to describe given range as given cache type. Use MTRR pairs
+ * starting with the given MTRRphys Base address, and use as many as is
+ * required up to (excluding) MSR 020C, which is reserved for OS.
+ *
+ * "Limit" in the context of this procedure is not the numerically correct
+ * limit, but rather the Last address+1, for purposes of coding efficiency
+ * and readability. Size of a region is then Limit-Base.
+ *
+ * 1. Size of each range must be a power of two
+ * 2. Each range must be naturally aligned (Base is same as size)
+ *
+ * There are two code paths: the ascending path and descending path (analogous
+ * to bsf and bsr), where the next limit is a function of the next set bit in
+ * a forward or backward sequence of bits (as a function of the Limit). We
+ * start with the ascending path, to ensure that regions are naturally aligned,
+ * then we switch to the descending path to maximize MTRR usage efficiency.
+ * Base=0 is a special case where we start with the descending path.
+ * Correct Mask for region is 2comp(Size-1)-1,
+ * which is 2comp(Limit-Base-1)-1 *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Base - Base address[47:16] of specified range.
+ * @param[in] *LimitPtr - Limit address[47:16] of specified range.
+ * @param[in] MtrrAddr - address of var MTRR pair to start using.
+ * @param[in] MtrrType - Cache type for the range.
+ *
+ * @return TRUE - No failure occurred
+ * @return FALSE - Failure occurred because run out of variable-size MTRRs before completion.
+ */
+
+BOOLEAN
+STATIC
+MemNSetMTRRrangeNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Base,
+ IN OUT UINT32 *LimitPtr,
+ IN UINT32 MtrrAddr,
+ IN UINT8 MtrrType
+ )
+{
+ S_UINT64 SMsr;
+ UINT32 CurBase;
+ UINT32 CurLimit;
+ UINT32 CurSize;
+ UINT32 CurAddr;
+ UINT32 Value32;
+
+ CurBase = Base;
+ CurLimit = *LimitPtr;
+ CurAddr = MtrrAddr;
+
+ while ((CurAddr >= 0x200) && (CurAddr < 0x20A) && (CurBase < *LimitPtr)) {
+ CurSize = CurLimit = (UINT32)1 << LibAmdBitScanForward (CurBase);
+ CurLimit += CurBase;
+ if ((CurBase == 0) || (*LimitPtr < CurLimit)) {
+ CurLimit = *LimitPtr - CurBase;
+ CurSize = CurLimit = (UINT32)1 << LibAmdBitScanReverse (CurLimit);
+ CurLimit += CurBase;
+ }
+
+ // prog. MTRR with current region Base
+ SMsr.lo = (CurBase << 16) | (UINT32)MtrrType;
+ SMsr.hi = CurBase >> (32 - 16);
+ LibAmdMsrWrite (CurAddr, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+
+ // prog. MTRR with current region Mask
+ CurAddr++; // other half of MSR pair
+ Value32 = CurSize - (UINT32)1;
+ Value32 = ~Value32;
+ SMsr.hi = (Value32 >> (32 - 16)) & NBPtr->VarMtrrHiMsk;
+ SMsr.lo = (Value32 << 16) | ((UINT32)1 << MTRR_VALID);
+ LibAmdMsrWrite (CurAddr, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+
+ CurBase = CurLimit;
+ CurAddr++; // next MSR pair
+ }
+
+ if (CurLimit < *LimitPtr) {
+ // Announce failure
+ *LimitPtr = CurLimit;
+ IDS_ERROR_TRAP;
+ }
+
+ while ((CurAddr >= 0x200) && (CurAddr < 0x20C)) {
+ SMsr.lo = SMsr.hi = 0;
+ LibAmdMsrWrite (CurAddr, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+ CurAddr++;
+ }
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * Program one MTRR to describe Uma region as UC cache type if we detect running out of
+ * Mtrr circumstance.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *BasePtr - Base address[47:24] of specified range.
+ * @param[in] *LimitPtr - Limit address[47:24] of specified range.
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemNSetMTRRUmaRegionUCNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 *BasePtr,
+ IN OUT UINT32 *LimitPtr
+ )
+{
+ S_UINT64 SMsr;
+ UINT32 Mtrr;
+ UINT32 Size;
+ UINT32 Value32;
+
+ Size = *LimitPtr - *BasePtr;
+ // Check if Size is a power of 2
+ if ((Size & (Size - 1)) != 0) {
+ for (Mtrr = 0x200; Mtrr < 0x20A; Mtrr += 2) {
+ LibAmdMsrRead (Mtrr + 1, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+ if ((SMsr.lo & ((UINT32) 1 << 11)) == 0) {
+ MemNSetMTRRrangeNb (NBPtr, *BasePtr, LimitPtr, Mtrr, 0);
+ break;
+ }
+ }
+ if (Mtrr == 0x20A) {
+ // Run out of MTRRs
+ IDS_ERROR_TRAP;
+ }
+ } else {
+ Mtrr = 0x20A; //Reserved pair of MTRR for UMA region.
+
+ // prog. MTRR with current region Base
+ SMsr.lo = *BasePtr << 16;
+ SMsr.hi = *BasePtr >> (32 - 16);
+ LibAmdMsrWrite (Mtrr, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+
+ // prog. MTRR with current region Mask
+ Mtrr++; // other half of MSR pair
+ Value32 = Size - (UINT32)1;
+ Value32 = ~Value32;
+ SMsr.hi = (Value32 >> (32 - 16)) & NBPtr->VarMtrrHiMsk;
+ SMsr.lo = (Value32 << 16) | ((UINT32)1 << MTRR_VALID);
+ LibAmdMsrWrite (Mtrr, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+ }
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function readjusts TOPMEM and MTRRs after allocating storage for C6
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemNC6AdjustMSRs (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT32 SysLimit;
+ UINT32 CurAddr;
+ S_UINT64 SMsr;
+
+ SysLimit = NBPtr->RefPtr->SysLimit + 1;
+ SMsr.hi = SysLimit >> (32 - 16);
+ SMsr.lo = SysLimit << 16;
+ if (SysLimit < _4GB_RJ16) {
+ LibAmdMsrWrite (TOP_MEM, (UINT64 *)&SMsr, &(NBPtr->MemPtr->StdHeader));
+ IDS_HDT_CONSOLE (MEM_FLOW, "TOP_MEM: %08x0000\n", SysLimit);
+ // If there is no UMA buffer, then set top of cache and MTRR.
+ // Otherwise, top of cache and MTRR will be set when UMA buffer is set up.
+ if (NBPtr->RefPtr->UmaMode == UMA_NONE) {
+ NBPtr->RefPtr->Sub4GCacheTop = (SysLimit << 16);
+ // Find unused MTRR to set C6 region to UC
+ for (CurAddr = 0x200; CurAddr < 0x20C; CurAddr += 2) {
+ LibAmdMsrRead (CurAddr + 1, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+ if ((SMsr.lo & ((UINT32) 1 << 11)) == 0) {
+ // Set region base as TOM
+ SMsr.hi = SysLimit >> (32 - 16);
+ SMsr.lo = SysLimit << 16;
+ LibAmdMsrWrite (CurAddr, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+
+ // set region mask to 16MB
+ SMsr.hi = NBPtr->VarMtrrHiMsk;
+ SMsr.lo = 0xFF000800;
+ LibAmdMsrWrite (CurAddr + 1, (UINT64 *)&SMsr, &NBPtr->MemPtr->StdHeader);
+
+ break;
+ }
+ }
+ }
+ } else {
+ LibAmdMsrWrite (TOP_MEM2, (UINT64 *)&SMsr, &(NBPtr->MemPtr->StdHeader));
+ IDS_HDT_CONSOLE (MEM_FLOW, "TOP_MEM2: %08x0000\n", SysLimit);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Family-specific hook to override the DdrMaxRate value for families with a
+ * non-GH-compatible encoding for BFDdrMaxRate
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *DdrMaxRate - Void pointer to DdrMaxRate. Used as INT16.
+ *
+ * @return TRUE
+ *
+ */
+BOOLEAN
+MemNGetMaxDdrRateUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *DdrMaxRate
+ )
+{
+ UINT8 DdrMaxRateEncoded;
+
+ DdrMaxRateEncoded = (UINT8) MemNGetBitFieldNb (NBPtr, BFDdrMaxRate);
+
+ if (DdrMaxRateEncoded == 0) {
+ * (UINT16 *) DdrMaxRate = UNSUPPORTED_DDR_FREQUENCY;
+ } else {
+ * (UINT16 *) DdrMaxRate = MemNGetMemClkFreqUnb (NBPtr, DdrMaxRateEncoded);
+ }
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function performs the action after save/restore execution
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ *
+ */
+
+BOOLEAN
+MemNAfterSaveRestoreUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ // Sync. up DctCfgSel value with NBPtr->Dct
+ MemNSetBitFieldNb (NBPtr, BFDctCfgSel, NBPtr->Dct);
+
+ return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnphy.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnphy.c
new file mode 100644
index 0000000..773e7b2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnphy.c
@@ -0,0 +1,1345 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnphy.c
+ *
+ * Common Northbridge Phy support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 87494 $ @e \$Date: 2013-02-04 12:06:47 -0600 (Mon, 04 Feb 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mu.h"
+#include "PlatformMemoryConfiguration.h"
+#include "heapManager.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+#define FILECODE PROC_MEM_NB_MNPHY_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define UNUSED_CLK 4
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/// Type of an entry for processing phy init compensation for client NB
+typedef struct {
+ BIT_FIELD_NAME IndexBitField; ///< Bit field on which the value is decided
+ BIT_FIELD_NAME StartTargetBitField; ///< First bit field to be modified
+ BIT_FIELD_NAME EndTargetBitField; ///< Last bit field to be modified
+ UINT16 ExtraValue; ///< Extra value needed to be written to bit field
+ CONST UINT16 (*TxPrePN)[3][5]; ///< Pointer to slew rate table
+} PHY_COMP_INIT_CLIENTNB;
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets a delay value a PCI register during training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] TrnDly - type of delay to be set
+ * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ *
+ * @return Value read
+ */
+
+UINT32
+MemNGetTrainDlyNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN TRN_DLY_TYPE TrnDly,
+ IN DRBN DrbnVar
+ )
+{
+ return NBPtr->MemNcmnGetSetTrainDly (NBPtr, 0, TrnDly, DrbnVar, 0);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets a delay value a PCI register during training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] TrnDly - type of delay to be set
+ * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ * @param[in] Field - Value to be programmed
+ *
+ */
+
+VOID
+MemNSetTrainDlyNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN TRN_DLY_TYPE TrnDly,
+ IN DRBN DrbnVar,
+ IN UINT16 Field
+ )
+{
+ NBPtr->MemNcmnGetSetTrainDly (NBPtr, 1, TrnDly, DrbnVar, Field);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function executes prototypical Phy fence training function.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNPhyFenceTrainingUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 FenceThresholdTxDll;
+ UINT8 FenceThresholdRxDll;
+ UINT8 FenceThresholdTxPad;
+ UINT16 Fence2Data;
+
+ MemNSetBitFieldNb (NBPtr, BFDataFence2, 0);
+ MemNSetBitFieldNb (NBPtr, BFFence2, 0);
+ // 1. Program D18F2x[1,0]9C_x0000_0008[FenceTrSel]=10b.
+ // 2. Perform phy fence training.
+ // 3. Write the calculated fence value to D18F2x[1,0]9C_x0000_000C[FenceThresholdTxDll].
+ MemNSetBitFieldNb (NBPtr, BFFenceTrSel, 2);
+ MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 30, 26, BFPhyFence);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tFenceThresholdTxDll\n");
+ MemNTrainPhyFenceNb (NBPtr);
+ FenceThresholdTxDll = (UINT8) MemNGetBitFieldNb (NBPtr, BFPhyFence);
+ NBPtr->FamilySpecificHook[DetectMemPllError] (NBPtr, &FenceThresholdTxDll);
+
+ // 4. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]0F[AlwaysEnDllClks]=001b.
+ MemNSetBitFieldNb (NBPtr, BFAlwaysEnDllClks, 0x1000);
+
+ // 5. Program D18F2x[1,0]9C_x0000_0008[FenceTrSel]=01b.
+ // 6. Perform phy fence training.
+ // 7. Write the calculated fence value to D18F2x[1,0]9C_x0000_000C[FenceThresholdRxDll].
+ MemNSetBitFieldNb (NBPtr, BFFenceTrSel, 1);
+ MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 25, 21, BFPhyFence);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFenceThresholdRxDll\n");
+ MemNTrainPhyFenceNb (NBPtr);
+ FenceThresholdRxDll = (UINT8) MemNGetBitFieldNb (NBPtr, BFPhyFence);
+ NBPtr->FamilySpecificHook[DetectMemPllError] (NBPtr, &FenceThresholdRxDll);
+
+ // 8. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]0F[AlwaysEnDllClks]=000b.
+ MemNSetBitFieldNb (NBPtr, BFAlwaysEnDllClks, 0x0000);
+
+ // 9. Program D18F2x[1,0]9C_x0000_0008[FenceTrSel]=11b.
+ // 10. Perform phy fence training.
+ // 11. Write the calculated fence value to D18F2x[1,0]9C_x0000_000C[FenceThresholdTxPad].
+ MemNSetBitFieldNb (NBPtr, BFFenceTrSel, 3);
+ MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 20, 16, BFPhyFence);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFenceThresholdTxPad\n");
+ MemNTrainPhyFenceNb (NBPtr);
+ FenceThresholdTxPad = (UINT8) MemNGetBitFieldNb (NBPtr, BFPhyFence);
+ NBPtr->FamilySpecificHook[DetectMemPllError] (NBPtr, &FenceThresholdTxPad);
+
+ // Program Fence2 threshold for Clk, Cmd, and Addr
+ if (FenceThresholdTxPad < 16) {
+ MemNSetBitFieldNb (NBPtr, BFClkFence2, FenceThresholdTxPad | 0x10);
+ MemNSetBitFieldNb (NBPtr, BFCmdFence2, FenceThresholdTxPad | 0x10);
+ MemNSetBitFieldNb (NBPtr, BFAddrFence2, FenceThresholdTxPad | 0x10);
+ } else {
+ MemNSetBitFieldNb (NBPtr, BFClkFence2, 0);
+ MemNSetBitFieldNb (NBPtr, BFCmdFence2, 0);
+ MemNSetBitFieldNb (NBPtr, BFAddrFence2, 0);
+ }
+
+ // Program Fence2 threshold for data
+ Fence2Data = 0;
+ if (FenceThresholdTxPad < 16) {
+ Fence2Data |= FenceThresholdTxPad | 0x10;
+ }
+ if (FenceThresholdRxDll < 16) {
+ Fence2Data |= (FenceThresholdRxDll | 0x10) << 10;
+ }
+ if (FenceThresholdTxDll < 16) {
+ Fence2Data |= (FenceThresholdTxDll | 0x10) << 5;
+ }
+ MemNSetBitFieldNb (NBPtr, BFDataFence2, Fence2Data);
+ NBPtr->FamilySpecificHook[ProgramFence2RxDll] (NBPtr, &Fence2Data);
+
+ if (NBPtr->MCTPtr->Status[SbLrdimms]) {
+ // 18. If motherboard routing requires CS[7:6] to adopt address timings, e.g. 3 LRDIMMs/ch with CS[7:6]
+ // routed across all DIMM sockets, BIOS performs the following:
+ if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_NO_LRDIMM_CS67_ROUTING, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) != NULL) {
+ // A. Program D18F2xA8_dct[1:0][CSTimingMux67] = 1.
+ MemNSetBitFieldNb (NBPtr, BFCSTimingMux67, 1);
+ // B. Program D18F2x9C_x0D0F_8021_dct[1:0]:
+ // - DiffTimingEn = 1.
+ // - IF (D18F2x9C_x0000_0004_dct[1:0][AddrCmdFineDelay] >=
+ // D18F2x9C_x0D0F_E008_dct[1:0][FenceValue]) THEN Fence = 1 ELSE Fence = 0.
+ // - Delay = D18F2x9C_x0000_0004_dct[1:0][AddrCmdFineDelay].
+ //
+ MemNSetBitFieldNb (NBPtr, BFDiffTimingEn, 1);
+ MemNSetBitFieldNb (NBPtr, BFFence, (MemNGetBitFieldNb (NBPtr, BFAddrCmdFineDelay) >= MemNGetBitFieldNb (NBPtr, BFFenceValue)) ? 1 : 0);
+ MemNSetBitFieldNb (NBPtr, BFDelay, (MemNGetBitFieldNb (NBPtr, BFAddrCmdFineDelay)));
+ }
+ }
+
+ // 19. Reprogram F2x9C_04.
+ MemNSetBitFieldNb (NBPtr, BFAddrTmgControl, MemNGetBitFieldNb (NBPtr, BFAddrTmgControl));
+
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function executes Phy fence training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNTrainPhyFenceNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 Byte;
+ INT16 Avg;
+ UINT8 PREvalue;
+
+ if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface)) {
+ return;
+ }
+
+ // 1. BIOS first programs a seed value to the phase recovery
+ // engine registers.
+ //
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tSeeds: ");
+ for (Byte = 0; Byte < MAX_BYTELANES_PER_CHANNEL; Byte++) {
+ // This includes ECC as byte 8
+ MemNSetTrainDlyNb (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (0, Byte), 19);
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", 19);
+ }
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tPhyFenceTrEn = 1");
+ // 2. Set F2x[1, 0]9C_x08[PhyFenceTrEn]=1.
+ MemNSetBitFieldNb (NBPtr, BFPhyFenceTrEn, 1);
+
+ if (!NBPtr->IsSupported[UnifiedNbFence]) {
+ // 3. Wait 200 MEMCLKs.
+ MemNWaitXMemClksNb (NBPtr, 200);
+ } else {
+ // 3. Wait 2000 MEMCLKs.
+ MemNWaitXMemClksNb (NBPtr, 2000);
+ }
+
+ // 4. Clear F2x[1, 0]9C_x08[PhyFenceTrEn]=0.
+ MemNSetBitFieldNb (NBPtr, BFPhyFenceTrEn, 0);
+
+ // 5. BIOS reads the phase recovery engine registers
+ // F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52.
+ // 6. Calculate the average value of the fine delay and subtract 8.
+ //
+ Avg = 0;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t PRE: ");
+ for (Byte = 0; Byte < MAX_BYTELANES_PER_CHANNEL; Byte++) {
+ //
+ // This includes ECC as byte 8. ECC Byte lane (8) is ignored by MemNGetTrainDlyNb function where
+ // ECC is not supported.
+ //
+ PREvalue = (UINT8) (0x1F & MemNGetTrainDlyNb (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (0, Byte)));
+ Avg = Avg + ((INT16) PREvalue);
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", PREvalue);
+ }
+ Avg = ((Avg + 8) / 9); // round up
+
+ NBPtr->MemNPFenceAdjustNb (NBPtr, &Avg);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFence: %02x\n", Avg);
+
+ // 7. Write the value to F2x[1, 0]9C_x0C[PhyFence].
+ MemNSetBitFieldNb (NBPtr, BFPhyFence, Avg);
+
+ // 8. BIOS rewrites F2x[1, 0]9C_x04, DRAM Address/Command Timing Control
+ // Register delays for both channels. This forces the phy to recompute
+ // the fence.
+ //
+ MemNSetBitFieldNb (NBPtr, BFAddrTmgControl, MemNGetBitFieldNb (NBPtr, BFAddrTmgControl));
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ *
+ * Returns the parameters for a requested delay value to be used in training
+ * The correct Min, Max and Mask are determined based on the type of Delay,
+ * and the frequency
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] TrnDly - Type of delay
+ * @param[in,out] *Parms - Pointer to the TRN_DLY-PARMS struct
+ *
+ */
+
+VOID
+MemNGetTrainDlyParmsUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN TRN_DLY_TYPE TrnDly,
+ IN OUT TRN_DLY_PARMS *Parms
+ )
+{
+ Parms->Min = 0;
+
+ if ((TrnDly == AccessWrDatDly) || (TrnDly == AccessRdDqsDly)) {
+ Parms->Max = 0x1F;
+ Parms->Mask = 0x01F;
+ }
+}
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets or set DQS timing during training.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] TrnDly - type of delay to be set
+ * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed
+ * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding
+ * @param[in] Field - Value to be programmed
+ * @param[in] IsSet - Indicates if the function will set or get
+ *
+ * @return value read, if the function is used as a "get"
+ */
+
+UINT32
+MemNcmnGetSetTrainDlyUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 IsSet,
+ IN TRN_DLY_TYPE TrnDly,
+ IN DRBN DrbnVar,
+ IN UINT16 Field
+ )
+{
+ UINT16 Index;
+ UINT16 Offset;
+ UINT32 Value;
+ UINT32 Address;
+ UINT8 Dimm;
+ UINT8 Rank;
+ UINT8 Byte;
+ UINT8 Nibble;
+ UINT8 DimmNibble;
+
+ Dimm = DRBN_DIMM (DrbnVar);
+ Rank = DRBN_RANK (DrbnVar);
+ Byte = DRBN_BYTE (DrbnVar);
+ Nibble = DRBN_NBBL (DrbnVar);
+ DimmNibble = DRBN_DIMM_NBBL (DrbnVar);
+
+ ASSERT (Dimm < (NBPtr->CsPerChannel / NBPtr->CsPerDelay));
+ ASSERT (Byte <= ECC_DLY);
+ if ((Byte == ECC_DLY) && (!NBPtr->MCTPtr->Status[SbEccDimms] || !NBPtr->IsSupported[EccByteTraining])) {
+ // When ECC is not enabled
+ if (IsSet) {
+ // On write, ignore
+ return 0;
+ } else {
+ // On read, redirect to byte 0 to correct fence averaging
+ Byte = 0;
+ }
+ }
+
+ switch (TrnDly) {
+ case AccessRcvEnDly:
+ Index = 0x10;
+ break;
+ case AccessWrDqsDly:
+ Index = 0x30;
+ break;
+ case AccessWrDatDly:
+ Index = 0x01;
+ break;
+ case AccessRdDqsDly:
+ Index = 0x05;
+ break;
+ case AccessRdDqs2dDly:
+ Index = 0x00;
+ break;
+ case AccessPhRecDly:
+ Index = 0x50;
+ break;
+ default:
+ Index = 0;
+ IDS_ERROR_TRAP;
+ }
+
+ switch (TrnDly) {
+ case AccessRcvEnDly:
+ case AccessWrDqsDly:
+ Index += (Dimm * 3);
+ if (Byte & 0x04) {
+ // if byte 4,5,6,7
+ Index += 0x10;
+ }
+ if (Byte & 0x02) {
+ // if byte 2,3,6,7
+ Index++;
+ }
+ if (Byte > 7) {
+ Index += 2;
+ }
+ Offset = 16 * (Byte % 2);
+ Index |= (Rank << 8);
+ Index |= (Nibble << 9);
+ Address = Index;
+ break;
+
+ case AccessRdDqsDly:
+ case AccessWrDatDly:
+
+ if (NBPtr->IsSupported[DimmBasedOnSpeed]) {
+ if (NBPtr->DCTPtr->Timings.Speed < DDR800_FREQUENCY) {
+ // if DDR speed is below 800, use DIMM 0 delays for all DIMMs.
+ Dimm = 0;
+ }
+ }
+
+ Index += (Dimm * 0x100);
+ if (Nibble) {
+ if (Rank) {
+ Index += 0xA0;
+ } else {
+ Index += 0x70;
+ }
+ } else if (Rank) {
+ Index += 0x60;
+ }
+ // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need
+ // to run AccessPhRecDly sequence.
+ case AccessPhRecDly:
+ Index += (Byte / 4);
+ Offset = 8 * (Byte % 4);
+ Address = Index;
+ break;
+ case AccessRdDqs2dDly:
+ Address = 0x0D0F0000;
+ Index += (DimmNibble >> 1) * 0x100;
+ Index += 0x20;
+ Index = Index + Dimm;
+ Offset = 4 * ((DimmNibble & 0x01) * 2);
+ Address += Index;
+ break;
+ default:
+ Offset = 0;
+ IDS_ERROR_TRAP;
+ Address = Index;
+ }
+ MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+ MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+ Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg);
+ if (TrnDly == AccessRdDqsDly) {
+ NBPtr->FamilySpecificHook[AdjustRdDqsDlyOffset] (NBPtr, &Offset);
+ }
+
+ if (IsSet) {
+ if (TrnDly == AccessPhRecDly) {
+ Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03];
+ }
+ if (TrnDly != AccessRdDqs2dDly) {
+ Value = ((UINT32)Field << Offset) | (Value & (~((UINT32) ((TrnDly == AccessRcvEnDly) ? 0x3FF : 0xFF) << Offset)));
+ } else {
+ Value = ((UINT32)Field << Offset) | (Value & (~((UINT32) 0x1F << Offset)));
+ }
+ ASSERT (!NBPtr->IsSupported[ScrubberEn]); // Phy CSR write is not allowed after scrubber is enabled
+ MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value);
+ Address |= DCT_ACCESS_WRITE;
+ MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address);
+ MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE);
+ if (TrnDly == AccessPhRecDly) {
+ NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value;
+ }
+ } else {
+ if (TrnDly != AccessRdDqs2dDly) {
+ Value = (Value >> Offset) & (UINT32) ((TrnDly == AccessRcvEnDly) ? 0x3FF : 0xFF);
+ } else {
+ Value = (Value >> Offset) & (UINT32) (0x1F);
+ }
+ }
+ return Value;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initializes the training pattern.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return AGESA_STATUS - Result
+ * AGESA_SUCCESS - Training pattern is ready to use
+ * AGESA_ERROR - Unable to initialize the pattern.
+ */
+
+AGESA_STATUS
+MemNTrainingPatternInitNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ TRAIN_PATTERN TrainPattern;
+ AGESA_STATUS Status;
+
+ TechPtr = NBPtr->TechPtr;
+ TrainPattern = 0;
+ //
+ // Check the training type
+ //
+ if (TechPtr->TrainingType == TRN_DQS_POSITION) {
+ //
+ // DQS Position Training
+ //
+ if (NBPtr->PosTrnPattern == POS_PATTERN_256B) {
+ //
+ // 256 Bit pattern
+ //
+ if (NBPtr->MCTPtr->Status[Sb128bitmode]) {
+ TrainPattern = TestPatternJD256B;
+ TechPtr->PatternLength = 64;
+ } else {
+ TrainPattern = TestPatternJD256A;
+ TechPtr->PatternLength = 32;
+ }
+ } else {
+ //
+ // 72 bit pattern will be used if PosTrnPattern is not specified
+ //
+ if (NBPtr->MCTPtr->Status[Sb128bitmode]) {
+ TrainPattern = TestPatternJD1B;
+ TechPtr->PatternLength = 18;
+ } else {
+ TrainPattern = TestPatternJD1A;
+ TechPtr->PatternLength = 9;
+ }
+ }
+ } else if (TechPtr->TrainingType == TRN_MAX_READ_LATENCY) {
+ //
+ // Max Read Latency Training
+ //
+ TrainPattern = TestPatternML;
+ TechPtr->PatternLength = (NBPtr->MCTPtr->Status[Sb128bitmode]) ? 6 : 3;
+ } else {
+ //
+ // Error - TechPtr->Training Type must be set to one of the types handled in this function
+ //
+ ASSERT (FALSE);
+ }
+ //
+ // Allocate training buffer
+ //
+ AllocHeapParams.RequestedBufferSize = (TechPtr->PatternLength * 64 * 2) + 16;
+ AllocHeapParams.BufferHandle = AMD_MEM_TRAIN_BUFFER_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ Status = HeapAllocateBuffer (&AllocHeapParams, &NBPtr->MemPtr->StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ if (Status != AGESA_SUCCESS) {
+ return Status;
+ }
+ TechPtr->PatternBufPtr = AllocHeapParams.BufferPtr;
+ AlignPointerTo16Byte (&TechPtr->PatternBufPtr);
+ TechPtr->TestBufPtr = TechPtr->PatternBufPtr + (TechPtr->PatternLength * 64);
+
+ // Prepare training pattern
+ MemUFillTrainPattern (TrainPattern, TechPtr->PatternBufPtr, TechPtr->PatternLength * 64);
+
+ return Status;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determined the settings for the Reliable Read/Write engine
+ * for each specific type of training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *OptParam - Pointer to an Enum of TRAINING_TYPE
+ *
+ * @return TRUE
+ */
+
+BOOLEAN
+MemNSetupHwTrainingEngineUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *OptParam
+ )
+{
+ TRAINING_TYPE TrnType;
+ RRW_SETTINGS *Rrw;
+
+ TrnType = *(TRAINING_TYPE*) OptParam;
+ Rrw = &NBPtr->RrwSettings;
+ //
+ // Common Settings
+ //
+ Rrw->TgtBankAddressA = CPG_BANK_ADDRESS_A;
+ Rrw->TgtRowAddressA = CPG_ROW_ADDRESS_A;
+ Rrw->TgtColAddressA = CPG_COL_ADDRESS_A;
+ Rrw->TgtBankAddressB = CPG_BANK_ADDRESS_B;
+ Rrw->TgtRowAddressB = CPG_ROW_ADDRESS_B;
+ Rrw->TgtColAddressB = CPG_COL_ADDRESS_B;
+ Rrw->CompareMaskHigh = CPG_COMPARE_MASK_HI;
+ Rrw->CompareMaskLow = CPG_COMPARE_MASK_LOW;
+ Rrw->CompareMaskEcc = CPG_COMPARE_MASK_ECC;
+
+ switch (TrnType) {
+ case TRN_RCVR_ENABLE:
+ //
+ // Receiver Enable Training
+ //
+ NBPtr->TechPtr->PatternLength = 192;
+ break;
+ case TRN_MAX_READ_LATENCY:
+ //
+ // Max Read Latency Training
+ //
+ Rrw->CmdTgt = CMD_TGT_A;
+ NBPtr->TechPtr->PatternLength = 32;
+ Rrw->DataPrbsSeed = PRBS_SEED_32;
+ break;
+ case TRN_DQS_POSITION:
+ //
+ // Read/Write DQS Position training
+ //
+ Rrw->CmdTgt = CMD_TGT_AB;
+ NBPtr->TechPtr->PatternLength = 256;
+ Rrw->DataPrbsSeed = PRBS_SEED_256;
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finalizes the training pattern.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Index - Index of Write Data Delay Value
+ * @param[in,out] *Value - Write Data Delay Value
+ * @return BOOLEAN - TRUE - Use the value returned.
+ * FALSE - No more values in table.
+ */
+
+BOOLEAN
+MemNGetApproximateWriteDatDelayNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Index,
+ IN OUT UINT8 *Value
+ )
+{
+ CONST UINT8 WriteDatDelayValue[] = {0x10, 0x4, 0x8, 0xC, 0x14, 0x18, 0x1C, 0x1F};
+ if (Index < GET_SIZE_OF (WriteDatDelayValue)) {
+ *Value = WriteDatDelayValue[Index];
+ return TRUE;
+ }
+ return FALSE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finalizes the training pattern.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return AGESA_STATUS - Result
+ * AGESA_SUCCESS - Training pattern has been finalized.
+ * AGESA_ERROR - Unable to initialize the pattern.
+ */
+
+AGESA_STATUS
+MemNTrainingPatternFinalizeNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ AGESA_STATUS Status;
+ //
+ // Deallocate training buffer
+ //
+ Status = HeapDeallocateBuffer (AMD_MEM_TRAIN_BUFFER_HANDLE, &NBPtr->MemPtr->StdHeader);
+ ASSERT (Status == AGESA_SUCCESS);
+ return Status;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function returns the number of Chipselects controlled by each set
+ * of Delay registers under current conditions.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return
+ */
+
+UINT8
+MemNCSPerDelayNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ if (MemNGetBitFieldNb (NBPtr, BFPerRankTimingEn) == 1) {
+ return 1;
+ } else {
+ return 2;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function returns the minimum data eye width in 32nds of a UI for
+ * the type of data eye(Rd/Wr) that is being trained. This value will
+ * be the minimum number of consecutive delays that yield valid data.
+ * Uses TechPtr->Direction to determine read or write.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return
+ */
+
+UINT8
+MemNMinDataEyeWidthNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 MinRdDataeye;
+ UINT8 MinWrDataeye;
+ UINT8 *MinRdWrDataeyePtr;
+
+ MinRdWrDataeyePtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MIN_RD_WR_DATAEYE_WIDTH, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0,
+ &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+
+ if (NBPtr->TechPtr->Direction == DQS_READ_DIR) {
+ if (MinRdWrDataeyePtr != NULL) {
+ MinRdDataeye = MinRdWrDataeyePtr[0];
+ return MinRdDataeye;
+ } else {
+ return MIN_RD_DATAEYE_WIDTH_NB;
+ }
+ } else {
+ if (MinRdWrDataeyePtr != NULL) {
+ MinWrDataeye = MinRdWrDataeyePtr[1];
+ return MinWrDataeye;
+ } else {
+ return MIN_WR_DATAEYE_WIDTH_NB;
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs the phy registers according to the desired phy VDDIO voltage level
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+VOID
+MemNPhyVoltageLevelNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ BIT_FIELD_NAME BitField;
+ BIT_FIELD_NAME BFEnd;
+ UINT16 BFValue;
+ UINT16 RegValue;
+
+ BFValue = (UINT16) CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage) << 3;
+ BFEnd = NBPtr->IsSupported[ProgramCsrComparator] ? BFCsrComparator : BFCmpVioLvl;
+
+ for (BitField = BFDataRxVioLvl; BitField <= BFEnd; BitField++) {
+ RegValue = BFValue;
+ if (BitField == BFCsrComparator) {
+ RegValue >>= (3 - 2);
+ // Setting this bit in DCT0 adjusts the comparator for DCT0 and DCT1. Setting this bit in DCT1 has no effect.
+ NBPtr->SwitchDCT (NBPtr, 0);
+ MemNSetBitFieldNb (NBPtr, BitField, RegValue);
+ break;
+ } else if (BitField == BFCmpVioLvl) {
+ RegValue <<= (14 - 3);
+ // Must set this bit on DCT0 even when DCT0 has no memory
+ NBPtr->SwitchDCT (NBPtr, 0);
+ MemNSetBitFieldNb (NBPtr, BitField, RegValue);
+ }
+ MemNBrdcstSetNb (NBPtr, BitField, RegValue);
+ }
+ // Program D18F2x9C_x0D0F_4006_dct[0][VrefSel] = 0.
+ MemNSetBitFieldNb (NBPtr, BFObsrvVrefSel, 0);
+ // Program D18F2x9C_x0D0F_4007_dct[0] per platform requirements.
+ NBPtr->FamilySpecificHook[PhyInitVref] (NBPtr, NULL);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function calculates the value of WrDqDqsEarly and programs it into
+ * the DCT and adds it to the WrDqsGrossDelay of each byte lane on each
+ * DIMM of the channel.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNCalcWrDqDqsEarlyUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ DCT_STRUCT *DCTPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+ UINT8 Dimm;
+ UINT8 ByteLane;
+ UINT8 *WrDqsDlysPtr;
+ UINT8 WrDqDqsEarly;
+ UINT8 ChipSel;
+
+ ASSERT ((NBPtr->IsSupported[WLSeedAdjust]) && (NBPtr->IsSupported[WLNegativeDelay]));
+
+ TechPtr = NBPtr->TechPtr;
+ ChannelPtr = NBPtr->ChannelPtr;
+ DCTPtr = NBPtr->DCTPtr;
+
+ ASSERT (NBPtr != NULL);
+ ASSERT (ChannelPtr != NULL);
+ ASSERT (DCTPtr != NULL);
+ //
+ // For each DIMM:
+ // - The Critical Gross Delay (CGD) is the minimum GrossDly of all byte lanes and all DIMMs.
+ // - If (CGD < 0) Then
+ // - D18F2xA8_dct[1:0][WrDqDqsEarly] = ABS(CGD)
+ // - WrDqsGrossDly = GrossDly + WrDqDqsEarly
+ // - Else
+ // - D18F2xA8_dct[1:0][WrDqDqsEarly] = 0.
+ // - WrDqsGrossDly = GrossDly
+ //
+ WrDqDqsEarly = 0;
+ if (TechPtr->WLCriticalDelay < 0) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCalculating WrDqDqsEarly, adjusting WrDqs.\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMin. Critical Delay: %x\n", TechPtr->WLCriticalDelay);
+ // We've saved the entire negative delay value, so take the ABS and convert to GrossDly.
+ WrDqDqsEarly = (UINT8) (0x00FF &((((ABS (TechPtr->WLCriticalDelay)) + 0x1F) / 0x20)));
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tWrDqDqsEarly : %02x\n\n", WrDqDqsEarly);
+ //
+ // Loop through All WrDqsDlys on all DIMMs
+ //
+ for (ChipSel = 0; ChipSel < NBPtr->CsPerChannel; ChipSel = ChipSel + NBPtr->CsPerDelay) {
+ if ((NBPtr->MCTPtr->Status[SbLrdimms]) ? ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0) :
+ ((DCTPtr->Timings.CsEnabled & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSel)) != 0)) {
+ //
+ // If LRDIMMs, only include the physical dimms, not logical Dimms
+ //
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS %x:", ChipSel);
+ Dimm = ChipSel / NBPtr->CsPerDelay;
+
+ WrDqsDlysPtr = &(ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ())]);
+ for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ WrDqsDlysPtr[ByteLane] += (WrDqDqsEarly << 5);
+ NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqsDlysPtr[ByteLane]);
+ IDS_HDT_CONSOLE (MEM_FLOW, " %02x", WrDqsDlysPtr[ByteLane]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ }
+ }
+ }
+ MemNSetBitFieldNb (NBPtr, BFWrDqDqsEarly, WrDqDqsEarly);
+ return TRUE;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function forces phy to M0 state
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return none
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNForcePhyToM0Unb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ IDS_SKIP_HOOK (IDS_FORCE_PHY_TO_M0, NBPtr, &(NBPtr->MemPtr->StdHeader)) {
+ // 1. Program D18F2x9C_x0D0F_E013_dct[1:0] = 0118h.
+ MemNBrdcstSetUnConditionalNb (NBPtr, BFPllRegWaitTime, 0x118);
+ // 2. For each byte lane and each memory P-state: Program D18F2x9C_x0D0F_0[F,7:0][53,13]_dct[1:0][RxSsbMntClkEn] = 0.
+ MemNBrdcstSetUnConditionalNb (NBPtr, BFRxSsbMntClkEn, 0);
+ // 3. D18F2xA8_dct[1:0][MemPhyPllPdMode] = 00b.
+ MemNBrdcstSetUnConditionalNb (NBPtr, BFMemPhyPllPdMode, 0);
+ // 4. Force the phy to M0 with the following sequence:
+ // A. Program D18F2x9C_x0D0F_E006_dct[1:0][PllLockTime] = 190h. Restore the default PLL lock time.
+ MemNBrdcstSetUnConditionalNb (NBPtr, BFPllLockTime, NBPtr->FreqChangeParam->PllLockTimeDefault);
+ // B. For each DCT: Program D18F2x9C_x0000_000B_dct[1:0] = 80800000h.
+ MemNBrdcstSetUnConditionalNb (NBPtr, BFDramPhyStatusReg, 0x80800000);
+ NBPtr->SwitchDCT (NBPtr, 0);
+ // C. Program D18F2x9C_x0D0F_E018_dct[0][PhyPSMasterChannel] = 0.
+ MemNSetBitFieldNb (NBPtr, BFPhyPSMasterChannel, 0);
+ // D. Program D18F2x9C_x0000_000B_dct[0] = 40000000h. CH0 only;
+ MemNSetBitFieldNb (NBPtr, BFDramPhyStatusReg, 0x40000000);
+ // E. For each DCT: Program D18F2x9C_x0000_000B_dct[1:0] = 80000000h.
+ MemNBrdcstSetUnConditionalNb (NBPtr, BFDramPhyStatusReg, 0x80000000);
+ }
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function sets SkewMemClk before enabling MemClk
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *OptParam - Optional parameter
+ *
+ * @return TRUE - always
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNSetSkewMemClkUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ UINT8 Dct;
+
+ // SkewMemClk is set to 1 if all DCTs are enabled, else 0.
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize == 0) {
+ break;
+ }
+ }
+ MemNSwitchDCTNb (NBPtr, 0);
+ if (Dct == NBPtr->DctCount) {
+ MemNSetBitFieldNb (NBPtr, BFSkewMemClk, 0x10);
+ } else {
+ MemNSetBitFieldNb (NBPtr, BFSkewMemClk, 0);
+ }
+
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function masks the RdDqsDly Bit 0 before writing to register for UNB.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *Offset - Bit offset of the field to be programmed
+ *
+ * @return TRUE
+ */
+BOOLEAN
+MemNAdjustRdDqsDlyOffsetUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Offset
+ )
+{
+ *(UINT16*) Offset = *(UINT16*) Offset + 1;
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function initializes RxEn Delays for RxEn seedless training
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNInitializeRxEnSeedlessTrainingUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ UINT8 ByteLane;
+ // Save original PRE based RxEnDly for RxEn Seedless training
+ for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ NBPtr->TechPtr->RxOrig[ByteLane] = NBPtr->ChannelPtr->RcvEnDlys[(NBPtr->TechPtr->ChipSel / NBPtr->CsPerDelay) * NBPtr->TechPtr->DlyTableWidth () + ByteLane];
+ }
+ return TRUE;
+}
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function checks each bytelane for no window error.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNTrackRxEnSeedlessRdWrNoWindBLErrorUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ MemTTrackRxEnSeedlessRdWrNoWindBLError (NBPtr->TechPtr, OptParam);
+ return TRUE;
+}
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function checks each bytelane for small window error.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNTrackRxEnSeedlessRdWrSmallWindBLErrorUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ MemTTrackRxEnSeedlessRdWrSmallWindBLError (NBPtr->TechPtr, OptParam);
+ return TRUE;
+}
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function initializes a ByteLaneError error.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNInitialzeRxEnSeedlessByteLaneErrorUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ UINT8 ByteLane;
+ for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ NBPtr->TechPtr->ByteLaneError[ByteLane] = FALSE; // All Bytelanes have no errors
+ }
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets phy power saving related settings in different MPstate context.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return none
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNPhyPowerSavingMPstateUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ STATIC UINT8 Sequence[] = {8, 4, 3, 5, 2, 6, 1, 7, 0};
+ UINT16 DllPower[9];
+ UINT8 NumLanes;
+ UINT8 DllWakeTime;
+ UINT8 MaxRxStggrDly;
+ UINT8 MinRcvEnGrossDly;
+ UINT8 MinWrDatGrossDly;
+ UINT8 dRxStggrDly;
+ UINT8 dTxStggrDly;
+ UINT8 TempStggrDly;
+ UINT8 MaxTxStggrDly;
+ UINT8 Tcwl;
+ UINT8 i;
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "Start Phy power saving setting for memory Pstate %d\n", NBPtr->MemPstate);
+ // 4. Program D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][DllDisEarlyU] = 1b.
+ // 5. Program D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][DllDisEarlyL] = 1b.
+ // 6. D18F2x9C_x0D0F_0[F,7:0][53,13]_dct[1:0][RxDqsUDllPowerDown] = 1.
+ MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F13, MemNGetBitFieldNb (NBPtr, BFPhy0x0D0F0F13) | 0x83);
+ // 7. D18F2x9C_x0D0F_812F_dct[1:0][PARTri] = ~D18F2x90_dct[1:0][ParEn].
+ // 8. D18F2x9C_x0D0F_812F_dct[1:0][Add17Tri, Add16Tri] = {1b, 1b}
+ if (NBPtr->MemPstate == MEMORY_PSTATE0) {
+ MemNSetBitFieldNb (NBPtr, BFAddrCmdTri, MemNGetBitFieldNb (NBPtr, BFAddrCmdTri) | 0xA1);
+ }
+ // 9. IF (DimmsPopulated == 1)&& ((D18F2x9C_x0000_0000_dct[1:0]_mp[1:0][CkeDrvStren]==010b) ||
+ // (D18F2x9C_x0000_0000_dct[1:0]_mp[1:0][CkeDrvStren]==011b)) THEN THEN
+ // program D18F2x9C_x0D0F_C0[40,00]_dct[1:0][LowPowerDrvStrengthEn] = 1
+ // ELSE program D18F2x9C_x0D0F_C0[40,00]_dct[1:0][LowPowerDrvStrengthEn] = 0 ENDIF.
+ if ((NBPtr->ChannelPtr->Dimms == 1) && ((MemNGetBitFieldNb (NBPtr, BFCkeDrvStren) == 2) || (MemNGetBitFieldNb (NBPtr, BFCkeDrvStren) == 3))) {
+ MemNSetBitFieldNb (NBPtr, BFLowPowerDrvStrengthEn, 0x100);
+ }
+ // 10. Program D18F2x9C_x0D0F_0[F,7:0][50,10]_dct[1:0][EnRxPadStandby] = IF
+ // (D18F2x94_dct[1:0][MemClkFreq] <= 800 MHz) THEN 1 ELSE 0 ENDIF.
+ MemNSetBitFieldNb (NBPtr, BFEnRxPadStandby, (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) ? 0x1000 : 0);
+ // 11. Program D18F2x9C_x0000_000D_dct[1:0]_mp[1:0] as follows:
+ // If (DDR rate < = 1600) TxMaxDurDllNoLock = RxMaxDurDllNoLock = 8h
+ // else TxMaxDurDllNoLock = RxMaxDurDllNoLock = 7h.
+ if (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) {
+ MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 8);
+ MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 8);
+ } else {
+ MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 7);
+ MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 7);
+ }
+ // TxCPUpdPeriod = RxCPUpdPeriod = 011b.
+ MemNSetBitFieldNb (NBPtr, BFTxCPUpdPeriod, 3);
+ MemNSetBitFieldNb (NBPtr, BFRxCPUpdPeriod, 3);
+ // TxDLLWakeupTime = RxDLLWakeupTime = 11b.
+ MemNSetBitFieldNb (NBPtr, BFTxDLLWakeupTime, 3);
+ MemNSetBitFieldNb (NBPtr, BFRxDLLWakeupTime, 3);
+
+ if (NBPtr->IsSupported[DllStaggerEn]) {
+ // 12. Program D18F2x9C_x0D0F_0[F,7:0][5C,1C]_dct[1:0] as follows.
+ // Let Numlanes = 8. = 9 with ECC.
+ NumLanes = (NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8;
+ // RxDllStggrEn = TxDllStggrEn = 1.
+ for (i = 0; i < 9; i ++) {
+ DllPower[i] = 0x8080;
+ }
+ // If (DDR rate > = 1866) DllWakeTime = 1, Else DllWakeTime = 0.
+ DllWakeTime = (NBPtr->DCTPtr->Timings.Speed >= DDR1866_FREQUENCY) ? 1 : 0;
+ // Let MaxRxStggrDly = (Tcl*2) + MIN(DqsRcvEnGrossDelay for all byte lanes (see D18F2x9C_x0000_00[2A:10]_dct[1:0]_mp[1:0])) - 4.
+ MinRcvEnGrossDly = NBPtr->TechPtr->GetMinMaxGrossDly (NBPtr->TechPtr, AccessRcvEnDly, FALSE);
+ ASSERT ((NBPtr->DCTPtr->Timings.CasL * 2 + MinRcvEnGrossDly) >= 4);
+ MaxRxStggrDly = NBPtr->DCTPtr->Timings.CasL * 2 + MinRcvEnGrossDly - 4;
+ // Let (real) dRxStggrDly = (MaxRxStggrDly - DllWakeTime) / (Numlanes - 1).
+ ASSERT (MaxRxStggrDly >= DllWakeTime);
+ dRxStggrDly = (MaxRxStggrDly - DllWakeTime) / (NumLanes - 1);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tMinimum RcvEnGrossDly: 0x%02x MaxRxStggrDly: 0x%02x dRxStggrDly: 0x%02x\n", MinRcvEnGrossDly, MaxRxStggrDly, dRxStggrDly);
+ // For each byte lane in the ordered sequence {8, 4, 3, 5, 2, 6, 1, 7, 0}, program RxDllStggrDly[5:0] = an
+ // increasing value, starting with 0 for the first byte lane in the sequence and increasing at a rate of dRxStggrDly
+ // for each subsequent byte lane. Convert the real to integer by rounding down or using C (int) typecast after linearization.
+ i = 9 - NumLanes;
+ TempStggrDly = 0;
+ for (; i < 9; i ++) {
+ DllPower[Sequence[i]] |= ((TempStggrDly & 0x3F) << 8);
+ TempStggrDly = TempStggrDly + dRxStggrDly;
+ }
+
+ // Let MaxTxStggrDly = (Tcwl*2) + MIN(MIN (WrDatGrossDly for all byte lanes (see
+ // D18F2x9C_x0000_0[3:0]0[2:1]_dct[1:0]_mp[1:0])), MIN(DqsRcvEnGrossDelay for all byte lanes (see
+ // D18F2x9C_x0000_00[2A:10]_dct[1:0]_mp[1:0])) - 4.
+ Tcwl = (UINT8) MemNGetBitFieldNb (NBPtr, BFTcwl);
+ MinWrDatGrossDly = NBPtr->TechPtr->GetMinMaxGrossDly (NBPtr->TechPtr, AccessWrDatDly, FALSE);
+ MaxTxStggrDly = Tcwl * 2 + MIN (MinRcvEnGrossDly, MinWrDatGrossDly) - 4;
+ // Let dTxStggrDly = (MaxTxStggrDly - DllWakeTime) / (Numlanes - 1).
+ ASSERT (MaxTxStggrDly >= DllWakeTime);
+ dTxStggrDly = (MaxTxStggrDly - DllWakeTime) / (NumLanes - 1);
+ // For each byte lane in the ordered sequence {8, 4, 3, 5, 2, 6, 1, 7, 0}, program TxDllStggrDly[5:0] = an
+ // increasing integer value, starting with 0 for the first byte lane in the sequence and increasing at a rate of
+ // dTxStggrDly for each subsequent byte lane.
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tMinimum WrDatGrossDly: 0x%02x MaxTxStggrDly: 0x%02x dTxStggrDly: 0x%02x\n", MinWrDatGrossDly, MaxTxStggrDly, dTxStggrDly);
+ i = 9 - NumLanes;
+ TempStggrDly = 0;
+ for (; i < 9; i ++) {
+ DllPower[Sequence[i]] |= (TempStggrDly & 0x3F);
+ TempStggrDly = TempStggrDly + dTxStggrDly;
+ }
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tByte Lane : ECC 07 06 05 04 03 02 01 00\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tDll Power : %04x %04x %04x %04x %04x %04x %04x %04x %04x\n",
+ DllPower[8], DllPower[7], DllPower[6], DllPower[5], DllPower[4], DllPower[3], DllPower[2], DllPower[1], DllPower[0]);
+
+ for (i = 0; i < NumLanes; i ++) {
+ MemNSetBitFieldNb (NBPtr, BFDataByteDllPowerMgnByte0 + i, (MemNGetBitFieldNb (NBPtr, BFDataByteDllPowerMgnByte0 + i) & 0x4040) | DllPower[i]);
+ }
+ }
+ // 13. Program D18F2x248_dct[1:0]_mp[1:0] and then D18F2x9C_x0D0F_0[F,7:0][53,13]_dct[1:0] as follows:
+ // For M1 context program RxChMntClkEn=RxSsbMntClkEn=0.
+ // For M0 context program RxChMntClkEn=RxSsbMntClkEn=1.
+ if (NBPtr->MemPstate == MEMORY_PSTATE1 || NBPtr->IsSupported[RxChnMntClksEn] == FALSE) {
+ MemNSetBitFieldNb (NBPtr, BFRxChMntClkEn, 0);
+ MemNSetBitFieldNb (NBPtr, BFRxSsbMntClkEn, 0);
+ } else {
+ MemNSetBitFieldNb (NBPtr, BFRxChMntClkEn, 1);
+ MemNSetBitFieldNb (NBPtr, BFRxSsbMntClkEn, 0x100);
+ }
+
+ IDS_OPTION_HOOK (IDS_PHY_DLL_STANDBY_CTRL, NBPtr, &NBPtr->MemPtr->StdHeader);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * This function adjusts the Phase Mask based on ECC.
+ *
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNAdjust2DPhaseMaskBasedOnEccUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ NBPtr->PhaseLaneMask = NBPtr->PhaseLaneMask & (UINT32) (NBPtr->MCTPtr->Status[SbEccDimms] ? 0x0FFFF : 0x3FFFF);
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function adjusts WrDqsBias before seed scaling
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *WrDqsBias - Pointer to WrDqsBias
+ *
+ * @return FALSE - Supported
+ * @return TRUE - Not supported
+ */
+
+BOOLEAN
+MemNAdjustWrDqsBeforeSeedScalingUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *WrDqsBias
+ )
+{
+ // Subtract (0x20 * WrDqDqsEarly) since it is a non-scalable component
+ * (INT16 *) WrDqsBias = (INT16) (0x20 * MemNGetBitFieldNb (NBPtr, BFWrDqDqsEarly));
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function adjust RdDqsDly used for MaxRdLatency calculation
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *OptParam - Optional parameter
+ *
+ * @return FALSE - Supported
+ * @return TRUE - Not supported
+ */
+
+BOOLEAN
+MemNAdjustRdDqsDlyForMaxRdLatUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ // Set RdDqsDlyForMaxRdLat to 0 so that actual RdDqsDly is used for MaxRdLatency calculation
+ NBPtr->RdDqsDlyForMaxRdLat = 0;
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * This function collects data for Eye Rim Search
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - No Errors occurred
+ * @return FALSE - Errors occurred
+ */
+BOOLEAN
+MemN2DRdDQSEyeRimSearchUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ return MemT2DRdDQSEyeRimSearch (NBPtr->TechPtr);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnreg.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnreg.c
new file mode 100644
index 0000000..c8fa9f4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnreg.c
@@ -0,0 +1,601 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnreg.c
+ *
+ * Common Northbridge register access functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB/)
+ * @e \$Revision: 84482 $ @e \$Date: 2012-12-16 22:48:10 -0600 (Sun, 16 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "merrhdl.h"
+#include "heapManager.h"
+#include "Filecode.h"
+#include "GeneralServices.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_NB_MNREG_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets the current DCT to work on.
+ * Should be called before accessing a certain DCT
+ * All data structures will be updated to point to the current DCT
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Dct - ID of the target DCT
+ *
+ */
+
+VOID
+MemNSwitchDCTNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Dct
+ )
+{
+ ASSERT (NBPtr->DctCount > Dct);
+ //
+ // Set the DctCfgSel to new DCT
+ //
+ NBPtr->FamilySpecificHook[DCTSelectSwitch] (NBPtr, &Dct);
+ NBPtr->Dct = Dct;
+ NBPtr->MCTPtr->Dct = NBPtr->Dct;
+ NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]);
+ NBPtr->PsPtr = &(NBPtr->PSBlock[NBPtr->Dct]);
+ NBPtr->DctCachePtr = &(NBPtr->DctCache[NBPtr->Dct]);
+
+ MemNSwitchChannelNb (NBPtr, NBPtr->Channel);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function is used by families that use a separate DctCfgSel bit to
+ * select the current DCT which will be accessed by function 2.
+ * NOTE: This function must be called BEFORE the NBPtr->Dct variable is
+ * updated.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Dct - Pointer to ID of the target DCT
+ *
+ */
+
+BOOLEAN
+MemNDctCfgSelectUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *Dct
+ )
+{
+ //
+ // Sanity check the current DctCfgSel setting
+ //
+ ASSERT (NBPtr->Dct == NBPtr->GetBitField (NBPtr, BFDctCfgSel));
+ //
+ // Set the DctCfgSel to new DCT
+ //
+ NBPtr->SetBitField (NBPtr, BFDctCfgSel, *(UINT8*)Dct);
+
+ return TRUE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets the current channel to work on.
+ * Should be called before accessing a certain channel
+ * All data structures will be updated to point to the current channel
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Channel - ID of the target channel
+ *
+ */
+
+VOID
+MemNSwitchChannelNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Channel
+ )
+{
+ NBPtr->Channel = Channel ? 1 : 0;
+ NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[NBPtr->Channel]);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function gets a bit field from PCI register
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] FieldName - Field name
+ *
+ * @return Bit field value
+ */
+
+UINT32
+MemNGetBitFieldNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName
+ )
+{
+ UINT32 Value;
+
+ Value = NBPtr->MemNCmnGetSetFieldNb (NBPtr, 0, FieldName, 0);
+ return Value;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function sets a bit field from PCI register
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] FieldName - Field name
+ * @param[in] Field - Value to be stored in PCT register
+ *
+ */
+
+VOID
+MemNSetBitFieldNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field
+ )
+{
+ NBPtr->MemNCmnGetSetFieldNb (NBPtr, 1, FieldName, Field);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Check if bitfields of all enabled DCTs on a die have the expected value. Ignore
+ * DCTs that are disabled.
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] FieldName - Bit Field name
+ * @param[in] Field - Value to be checked
+ *
+ * @return TRUE - All enabled DCTs have the expected value on the bitfield.
+ * @return FALSE - Not all enabled DCTs have the expected value on the bitfield.
+ *
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNBrdcstCheckNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field
+ )
+{
+ UINT8 Dct;
+ UINT8 CurrentDCT;
+ Dct = NBPtr->Dct;
+ for (CurrentDCT = 0; CurrentDCT < NBPtr->DctCount; CurrentDCT++) {
+ MemNSwitchDCTNb (NBPtr, CurrentDCT);
+ if ((NBPtr->DCTPtr->Timings.DctMemSize != 0) && !((CurrentDCT == 1) && NBPtr->Ganged)) {
+ if (MemNGetBitFieldNb (NBPtr, FieldName) != Field) {
+ MemNSwitchDCTNb (NBPtr, Dct);
+ return FALSE;
+ }
+ }
+ }
+ MemNSwitchDCTNb (NBPtr, Dct);
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Set bitfields of all enabled DCTs on a die to a value. Ignore
+ * DCTs that are disabled.
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] FieldName - Bit Field name
+ * @param[in] Field - Value to be set
+ *
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNBrdcstSetNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field
+ )
+{
+ UINT8 Dct;
+ UINT8 CurrentDCT;
+ Dct = NBPtr->Dct;
+ for (CurrentDCT = 0; CurrentDCT < NBPtr->DctCount; CurrentDCT++) {
+ MemNSwitchDCTNb (NBPtr, CurrentDCT);
+ if ((NBPtr->DCTPtr->Timings.DctMemSize != 0) && !((CurrentDCT == 1) && NBPtr->Ganged)) {
+ MemNSetBitFieldNb (NBPtr, FieldName, Field);
+ }
+ }
+ MemNSwitchDCTNb (NBPtr, Dct);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Set bitfields of all DCTs regardless of if they are being enabled or not on a
+ * die to a value.
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] FieldName - Bit Field name
+ * @param[in] Field - Value to be set
+ *
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNBrdcstSetUnConditionalNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field
+ )
+{
+ UINT8 Dct;
+ UINT8 CurrentDCT;
+ Dct = NBPtr->Dct;
+ for (CurrentDCT = 0; CurrentDCT < NBPtr->DctCount; CurrentDCT++) {
+ MemNSwitchDCTNb (NBPtr, CurrentDCT);
+ MemNSetBitFieldNb (NBPtr, FieldName, Field);
+ }
+ MemNSwitchDCTNb (NBPtr, Dct);
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ * This function calculates the memory channel index relative to the
+ * socket, taking the Die number, the Dct, and the channel.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Dct
+ * @param[in] Channel
+ *
+ */
+UINT8
+MemNGetSocketRelativeChannelNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Dct,
+ IN UINT8 Channel
+ )
+{
+ return ((NBPtr->MCTPtr->DieId * NBPtr->DctCount) + Dct);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Poll a bitfield. If the bitfield does not get set to the target value within
+ * specified microseconds, it times out.
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] FieldName - Bit Field name
+ * @param[in] Field - Value to be set
+ * @param[in] MicroSecond - Number of microsecond to wait
+ * @param[in] IfBroadCast - Need to broadcast to both DCT or not
+ *
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNPollBitFieldNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field,
+ IN UINT32 MicroSecond,
+ IN BOOLEAN IfBroadCast
+ )
+{
+ BOOLEAN ErrorRecovery;
+ BOOLEAN IgnoreErr;
+ UINT8 ExcludeDCT;
+ UINT16 ExcludeChipSelMask;
+ UINT32 EventInfo;
+ UINT64 InitTSC;
+ UINT64 CurrentTSC;
+ UINT64 TimeOut;
+ AGESA_STATUS EventClass;
+ MEM_DATA_STRUCT *MemPtr;
+ DIE_STRUCT *MCTPtr;
+ BOOLEAN TimeoutEn;
+
+ MemPtr = NBPtr->MemPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ ExcludeDCT = EXCLUDE_ALL_DCT;
+ ExcludeChipSelMask = EXCLUDE_ALL_CHIPSEL;
+ TimeoutEn = TRUE;
+ IDS_TIMEOUT_CTL (&TimeoutEn);
+
+ CurrentTSC = 0;
+ LibAmdMsrRead (TSC, &InitTSC, &MemPtr->StdHeader);
+ TimeOut = InitTSC + ((UINT64) MicroSecond * MemPtr->TscRate);
+
+ while ((CurrentTSC < TimeOut) || !TimeoutEn) {
+ if (IfBroadCast) {
+ if (NBPtr->BrdcstCheck (NBPtr, FieldName, Field)) {
+ break;
+ }
+ } else {
+ if (MemNGetBitFieldNb (NBPtr, FieldName) == Field) {
+ break;
+ }
+ }
+ LibAmdMsrRead (TSC, &CurrentTSC, &MemPtr->StdHeader);
+ }
+
+ if ((CurrentTSC >= TimeOut) && TimeoutEn) {
+ ErrorRecovery = TRUE;
+ IgnoreErr = FALSE;
+ IDS_OPTION_HOOK (IDS_MEM_ERROR_RECOVERY, &ErrorRecovery, &MemPtr->StdHeader);
+ IDS_OPTION_HOOK (IDS_MEM_IGNORE_ERROR, &IgnoreErr, &MemPtr->StdHeader);
+
+ // Default event class
+ // If different event class is needed in one entry, override it.
+ EventClass = AGESA_ERROR;
+ switch (FieldName) {
+ case BFDramEnabled:
+ EventInfo = MEM_ERROR_DRAM_ENABLED_TIME_OUT;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tDramEnabled bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFDctAccessDone:
+ EventInfo = MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT;
+ ExcludeDCT = NBPtr->Dct;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tDctAccessDone bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFSendCtrlWord:
+ EventInfo = MEM_ERROR_SEND_CTRL_WORD_TIME_OUT;
+ ExcludeDCT = NBPtr->Dct;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tSendCtrlWord bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFPrefDramTrainMode:
+ EventInfo = MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT;
+ ExcludeDCT = NBPtr->Dct;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tPrefDramTrainMode bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFEnterSelfRef:
+ EventInfo = MEM_ERROR_ENTER_SELF_REF_TIME_OUT;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tEnterSelfRef bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFFreqChgInProg:
+ EventInfo = MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT;
+ ExcludeDCT = NBPtr->Dct;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tFreqChgInProg bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFExitSelfRef:
+ EventInfo = MEM_ERROR_EXIT_SELF_REF_TIME_OUT;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tExitSelfRef bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFSendMrsCmd:
+ EventInfo = MEM_ERROR_SEND_MRS_CMD_TIME_OUT;
+ ExcludeDCT = NBPtr->Dct;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tSendMrsCmd bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFSendZQCmd:
+ EventInfo = MEM_ERROR_SEND_ZQ_CMD_TIME_OUT;
+ ExcludeDCT = NBPtr->Dct;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tSendZQCmd bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFDctExtraAccessDone:
+ EventInfo = MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT;
+ ExcludeDCT = NBPtr->Dct;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tDctExtraAccessDone bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFMemClrBusy:
+ EventInfo = MEM_ERROR_MEM_CLR_BUSY_TIME_OUT;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClrBusy bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFMemCleared:
+ EventInfo = MEM_ERROR_MEM_CLEARED_TIME_OUT;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tMemCleared bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFFlushWr:
+ EventInfo = MEM_ERROR_FLUSH_WR_TIME_OUT;
+ ExcludeDCT = NBPtr->Dct;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tFlushWr bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ case BFCurNbPstate:
+ EventInfo = MEM_ERROR_NBPSTATE_TRANSITION_TIME_OUT;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tCurNBPstate bitfield times out.\n");
+ ASSERT (ErrorRecovery || IgnoreErr);
+ break;
+ default:
+ EventClass = 0;
+ EventInfo = 0;
+ IDS_ERROR_TRAP;
+ }
+
+ PutEventLog (EventClass, EventInfo, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &MemPtr->StdHeader);
+ SetMemError (EventClass, MCTPtr);
+ if (!MemPtr->ErrorHandling (MCTPtr, ExcludeDCT, ExcludeChipSelMask, &MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *
+ * This function changes memory Pstate context
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] MemPstate - Target Memory Pstate
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemNChangeMemPStateContextNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSTATE MemPstate
+ )
+{
+ UINT8 PSMasterChannel;
+ UINT8 Dct;
+
+ ASSERT ((MemPstate == 0) || (MemPstate == 1));
+ ASSERT (NBPtr->MemPstate == ((MemNGetBitFieldNb (NBPtr, BFMemPsSel) == 0) ? MEMORY_PSTATE0 : MEMORY_PSTATE1));
+
+ IDS_HDT_CONSOLE (MEM_SETREG, "\nGo to Memory Pstate Conext %d\n", MemPstate);
+ Dct = NBPtr->Dct;
+ MemNSwitchDCTNb (NBPtr, 0);
+ // Figure out what is the master channel
+ PSMasterChannel = (UINT8) (MemNGetBitFieldNb (NBPtr, BFPhyPSMasterChannel) >> 8);
+
+ // Switch to the master channel to change PStateToAccess
+ // PStateToAccess is only effective on the master channel
+ MemNSwitchDCTNb (NBPtr, PSMasterChannel);
+ MemNSetBitFieldNb (NBPtr, BFMemPsSel, MemPstate);
+ MemNSetBitFieldNb (NBPtr, BFPStateToAccess, MemPstate << 8);
+
+ NBPtr->MemPstate = (MemPstate == 0) ? MEMORY_PSTATE0 : MEMORY_PSTATE1;
+ MemNSwitchDCTNb (NBPtr, Dct);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function allocates buffer for NB register table
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] Handle - Handle for heap allocation for NBRegTable
+ *
+ * @return TRUE - Successfully allocates buffer the first time
+ * @return FALSE - Buffer already allocated or fails to allocate
+ */
+
+BOOLEAN
+MemNAllocateNBRegTableNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN NB_REG_TAB_HANDLE Handle
+ )
+{
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ LOCATE_HEAP_PTR LocHeap;
+
+ // If NBRegTable for this family exists, use it
+ LocHeap.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_NB_REG_TABLE, Handle, 0, 0);
+ if (HeapLocateBuffer (&LocHeap, &(NBPtr->MemPtr->StdHeader)) == AGESA_SUCCESS) {
+ NBPtr->NBRegTable = (TSEFO *) LocHeap.BufferPtr;
+ return FALSE;
+ }
+
+ // Allocate new buffer for NBRegTable if it has not been allocated
+ AllocHeapParams.RequestedBufferSize = sizeof (TSEFO) * BFEndOfList;
+ AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_NB_REG_TABLE, Handle, 0, 0);
+ AllocHeapParams.Persist = HEAP_SYSTEM_MEM;
+ if (AGESA_SUCCESS != HeapAllocateBuffer (&AllocHeapParams, &(NBPtr->MemPtr->StdHeader))) {
+ ASSERT(FALSE); // NB and Tech Block Heap allocate error
+ return FALSE;
+ }
+ NBPtr->NBRegTable = (TSEFO *)AllocHeapParams.BufferPtr;
+ return TRUE;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function is an empty function used to intialize FamilySpecificHook array
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE - always
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemNDefaultFamilyHookNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mntrain3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mntrain3.c
new file mode 100644
index 0000000..f1b53d7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mntrain3.c
@@ -0,0 +1,243 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mntrain3.c
+ *
+ * Common Northbridge function for training flow for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/NB)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_NB_MNTRAIN3_FILECODE
+/* features */
+#include "mftds.h"
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemNHwWlPart2Nb (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR3[];
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initiates DQS training
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+MemNDQSTiming3Nb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ UINT8 i;
+ BOOLEAN Retval;
+ TechPtr = NBPtr->TechPtr;
+ Retval = TRUE;
+ if (TechPtr->NBPtr->MCTPtr->NodeMemSize) {
+ //Execute Technology specific training features
+ i = 0;
+ while (memTrainSequenceDDR3[i].TrainingSequenceEnabled != 0) {
+ if (memTrainSequenceDDR3[i].TrainingSequenceEnabled (NBPtr)) {
+ NBPtr->TrainingSequenceIndex = i;
+ Retval = memTrainSequenceDDR3[i].TrainingSequence (NBPtr);
+ break;
+ }
+ i++;
+ }
+ }
+ return Retval;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initiates DQS training for Server NB
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+
+BOOLEAN
+memNSequenceDDR3Nb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ MEM_TECH_BLOCK *TechPtr;
+ UINT8 i;
+ TechPtr = NBPtr->TechPtr;
+ i = NBPtr->TrainingSequenceIndex;
+ if (TechPtr->NBPtr->MCTPtr->NodeMemSize != 0) {
+ AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeDQSTraining, &NBPtr->MemPtr->StdHeader);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nCalling out to Platform BIOS...\n");
+ if (AgesaHookBeforeDQSTraining (NBPtr->MCTPtr->SocketId, TechPtr->NBPtr->MemPtr) == AGESA_SUCCESS) {
+ // Right now we do not have anything to do if the callout is implemented
+ }
+ AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeDQSTraining, &NBPtr->MemPtr->StdHeader);
+ //Execute Technology specific training features
+ if (memTrainSequenceDDR3[i].MemTechFeatBlock->EnterHardwareTraining (TechPtr)) {
+ TechPtr->TechnologySpecificHook[LrdimmBuf2DramTrain] (TechPtr, NULL);
+ if (memTrainSequenceDDR3[i].MemTechFeatBlock->SwWLTraining (TechPtr)) {
+ MemFInitTableDrive (NBPtr, MTAfterSwWLTrn);
+ if (memTrainSequenceDDR3[i].MemTechFeatBlock->HwBasedWLTrainingPart1 (TechPtr)) {
+ MemFInitTableDrive (NBPtr, MTAfterHwWLTrnP1);
+ if (memTrainSequenceDDR3[i].MemTechFeatBlock->HwBasedDQSReceiverEnableTrainingPart1 (TechPtr)) {
+ MemFInitTableDrive (NBPtr, MTAfterHwRxEnTrnP1);
+ // If target speed is higher than start-up speed, do frequency change and second pass of WL
+ do {
+ if (MemNHwWlPart2Nb (TechPtr)) {
+ if (memTrainSequenceDDR3[i].MemTechFeatBlock->TrainExitHwTrn (TechPtr)) {
+ IDS_OPTION_HOOK (IDS_PHY_DLL_STANDBY_CTRL, NBPtr, &(NBPtr->MemPtr->StdHeader));
+ if (memTrainSequenceDDR3[i].MemTechFeatBlock->NonOptimizedSWDQSRecEnTrainingPart1 (TechPtr)) {
+ if (memTrainSequenceDDR3[i].MemTechFeatBlock->OptimizedSwDqsRecEnTrainingPart1 (TechPtr)) {
+ MemFInitTableDrive (NBPtr, MTAfterSwRxEnTrn);
+ if (memTrainSequenceDDR3[i].MemTechFeatBlock->NonOptimizedSRdWrPosTraining (TechPtr)) {
+ if (memTrainSequenceDDR3[i].MemTechFeatBlock->OptimizedSRdWrPosTraining (TechPtr)) {
+ MemFInitTableDrive (NBPtr, MTAfterDqsRwPosTrn);
+ if (!NBPtr->FamilySpecificHook[MemPstateStageChange] (NBPtr, NULL)) {
+ continue;
+ }
+ if (NBPtr->Execute1dMaxRdLatTraining) {
+ do {
+ if (memTrainSequenceDDR3[i].MemTechFeatBlock->MaxRdLatencyTraining (TechPtr)) {
+ MemFInitTableDrive (NBPtr, MTAfterMaxRdLatTrn);
+ }
+ } while (NBPtr->ChangeNbFrequency (NBPtr));
+ } else {
+ // If not running MRL training, set everything back for 2D Training
+ memTrainSequenceDDR3[i].MemTechFeatBlock->TrainExitHwTrn (TechPtr);
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ } while (NBPtr->MemPstateStage == MEMORY_PSTATE_2ND_STAGE);
+ }
+ }
+ }
+ }
+ MemTMarkTrainFail (TechPtr);
+ }
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes HW WL at multiple speeds
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @return TRUE - No errors occurred
+ * FALSE - errors occurred
+ */
+
+BOOLEAN
+STATIC
+MemNHwWlPart2Nb (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ BOOLEAN retVal;
+ UINT8 i;
+ retVal = TRUE;
+ i = TechPtr->NBPtr->TrainingSequenceIndex;
+ while ((TechPtr->NBPtr->DCTPtr->Timings.TargetSpeed > TechPtr->NBPtr->DCTPtr->Timings.Speed) && (TechPtr->NBPtr->MemPstateStage != MEMORY_PSTATE_1ST_STAGE)) {
+ TechPtr->PrevSpeed = TechPtr->NBPtr->DCTPtr->Timings.Speed;
+ if (TechPtr->NBPtr->RampUpFrequency (TechPtr->NBPtr)) {
+ TechPtr->TechnologySpecificHook[LrdimmBuf2DramTrain] (TechPtr, NULL);
+ if (!memTrainSequenceDDR3[i].MemTechFeatBlock->HwBasedWLTrainingPart2 (TechPtr)) {
+ retVal = FALSE;
+ break;
+ }
+ MemFInitTableDrive (TechPtr->NBPtr, MTAfterHwWLTrnP2);
+ if (!memTrainSequenceDDR3[i].MemTechFeatBlock->HwBasedDQSReceiverEnableTrainingPart2 (TechPtr)) {
+ retVal = FALSE;
+ break;
+ }
+ MemFInitTableDrive (TechPtr->NBPtr, MTAfterHwRxEnTrnP2);
+ } else {
+ retVal = FALSE;
+ break;
+ }
+ }
+ return retVal;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/KB/FT3/mpSkbft3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/KB/FT3/mpSkbft3.c
new file mode 100644
index 0000000..f04c4a3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/KB/FT3/mpSkbft3.c
@@ -0,0 +1,130 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpSkbfT3.c
+ *
+ * Platform specific settings for KB DDR3 SO-DIMM FT3 system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps/KB/FT3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_KB_FT3_MPSKBFT3_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define SOCKET_FT3_KB 0
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+//
+// MemClkDis
+//
+STATIC CONST UINT8 ROMDATA KBSODdr3CLKDisFT3[] = {0xFF, 0xFF, 0x00 , 0x00, 0x00, 0x00, 0x00, 0x00};
+CONST PSC_TBL_ENTRY KBClkDisMapEntSOFT3 = {
+ {PSCFG_CLKDIS, SODIMM_TYPE + UDIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, SOCKET_FT3_KB, DDR3_TECHNOLOGY},
+ sizeof (KBSODdr3CLKDisFT3) / sizeof (UINT8),
+ (VOID *)&KBSODdr3CLKDisFT3
+};
+
+//
+// ODT tri-state
+//
+STATIC CONST UINT8 ROMDATA KBSODdr3ODTTriFT3[] = {0xFF, 0xFF, 0x00, 0x00};
+CONST PSC_TBL_ENTRY KBSODdr3ODTTriEntFT3 = {
+ {PSCFG_ODTTRI, SODIMM_TYPE + UDIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, SOCKET_FT3_KB, DDR3_TECHNOLOGY},
+ sizeof (KBSODdr3ODTTriFT3) / sizeof (UINT8),
+ (VOID *)&KBSODdr3ODTTriFT3
+};
+
+//
+// ChipSel tri-state
+//
+STATIC CONST UINT8 ROMDATA KBSODdr3CSTriFT3[] = {0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+CONST PSC_TBL_ENTRY KBSODdr3CSTriEntFT3 = {
+ {PSCFG_CSTRI, SODIMM_TYPE + UDIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, SOCKET_FT3_KB, DDR3_TECHNOLOGY},
+ sizeof (KBSODdr3CSTriFT3) / sizeof (UINT8),
+ (VOID *)&KBSODdr3CSTriFT3
+};
+
+// 2D training configuratrions
+// Format :
+// DimmPerCh, DDRrate, VDDIO, Dimm0, Dimm1, Dimm2, 2D
+//
+STATIC CONST PSCFG_S2D_ENTRY KBUDdr3S2DFT3[] = {
+ // DimmPerCh,Frequency,VDDIO,DIMM0,DIMM1,DIMM2,Enable2DTraining
+ {1, ANY_SPEED, VOLT_ALL, NP + DIMM_SR + DIMM_DR, NP, NP, 1},
+ {2, ANY_SPEED, VOLT_ALL, NP + DIMM_SR + DIMM_DR, NP + DIMM_SR + DIMM_DR, NP, 1}
+ };
+CONST PSC_TBL_ENTRY S2DTblEntUFT3 = {
+ {PSCFG_S2D, UDIMM_TYPE + SODIMM_TYPE + SODWN_SODIMM_TYPE, NOD_DONT_CARE, {AMD_FAMILY_16_KB, AMD_F16_ALL}, SOCKET_FT3_KB, DDR3_TECHNOLOGY},
+ sizeof (KBUDdr3S2DFT3) / sizeof (PSCFG_S2D_ENTRY),
+ (VOID *)&KBUDdr3S2DFT3
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/KB/mpSkb3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/KB/mpSkb3.c
new file mode 100644
index 0000000..76b85e5
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/KB/mpSkb3.c
@@ -0,0 +1,345 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpSkb.c
+ *
+ * Platform specific settings for KB DDR3 SO-DIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps/KB)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "mu.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_KB_MPSKB3_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+// Slow mode, POdtOff, Address timing and Output drive compensation for SODIMM ONLY configuration
+// Format :
+// DimmPerCh, DDRrate, VDDIO, Dimm0, Dimm1, Dimm2, SlowMode, AddTmgCtl, ODC, POdtOff
+//
+STATIC CONST PSCFG_SAO_ENTRY KBSODdr3SAO[] = {
+ {_1DIMM, DDR667 + DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00000000, 0x00002222, 0},
+ {_1DIMM, DDR1066, VOLT_ALL, DIMM_SR, NP, NP, 0, 0x003D3D3D, 0x10002222, 0},
+ {_1DIMM, DDR1066, VOLT_ALL, DIMM_DR, NP, NP, 0, 0x00000000, 0x10002222, 0},
+ {_1DIMM, DDR1333, VOLT_ALL, DIMM_SR, NP, NP, 0, 0x003D3D3D, 0x20112222, 0},
+ {_1DIMM, DDR1333, VOLT_ALL, DIMM_DR, NP, NP, 0, 0x00003D3D, 0x20112222, 0},
+ {_1DIMM, DDR1600, V1_5 + V1_35, DIMM_SR, NP, NP, 0, 0x003C3C3C, 0x30332222, 0},
+ {_1DIMM, DDR1600, V1_5 + V1_35, DIMM_DR, NP, NP, 1, 0x00003C3C, 0x30332222, 0},
+ {_1DIMM, DDR1866, V1_5, DIMM_SR, NP, NP, 0, 0x003C3C3C, 0x30332222, 0},
+ {_1DIMM, DDR1866, V1_5, DIMM_DR, NP, NP, 1, 0x00003C3C, 0x30332222, 0},
+ {_2DIMM, DDR667 + DDR800, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00000000, 0x00002222, 0},
+ {_2DIMM, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000000, 0x10222323, 0},
+ {_2DIMM, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000000, 0x20222323, 0},
+ {_2DIMM, DDR1066, VOLT_ALL, NP, DIMM_SR, NP, 0, 0x003D3D3D, 0x10002222, 0},
+ {_2DIMM, DDR1066, VOLT_ALL, NP, DIMM_DR, NP, 0, 0x00000000, 0x10002222, 0},
+ {_2DIMM, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000000, 0x30222323, 0},
+ {_2DIMM, DDR1333, VOLT_ALL, NP, DIMM_SR, NP, 0, 0x003D3D3D, 0x20112222, 0},
+ {_2DIMM, DDR1333, VOLT_ALL, NP, DIMM_DR, NP, 0, 0x00003D3D, 0x20112222, 0},
+ {_2DIMM, DDR1333, V1_5 + V1_35, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000000, 0x30222323, 0},
+ {_2DIMM, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, 1, 0x00000000, 0x30222323, 0},
+ {_2DIMM, DDR1600, V1_5 + V1_35, NP, DIMM_SR, NP, 0, 0x003C3C3C, 0x30332222, 0},
+ {_2DIMM, DDR1600, V1_5 + V1_35, NP, DIMM_DR, NP, 1, 0x00003C3C, 0x30332222, 0},
+ {_2DIMM, DDR1600, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000000, 0x30222323, 0},
+ {_2DIMM, DDR1600, V1_35, DIMM_SR, DIMM_SR, NP, 1, 0x00000000, 0x30222323, 0},
+ {_2DIMM, DDR1866, V1_5, NP, DIMM_SR, NP, 0, 0x003C3C3C, 0x30332222, 0},
+ {_2DIMM, DDR1866, V1_5, NP, DIMM_DR, NP, 1, 0x00003C3C, 0x30332222, 0},
+};
+CONST PSC_TBL_ENTRY KBSAOTblEntSO3 = {
+ {PSCFG_SAO, SODIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBSODdr3SAO) / sizeof (PSCFG_SAO_ENTRY),
+ (VOID *)&KBSODdr3SAO
+};
+
+// Slow mode, POdtOff, Address timing and Output drive compensation for SODIMM plus Solder-down DRAM configuration
+// Format :
+// DimmPerCh, DDRrate, VDDIO, Dimm0, Dimm1, Dimm2, SlowMode, AddTmgCtl, ODC, POdtOff
+//
+STATIC CONST PSCFG_SAO_ENTRY KBSoDwnPlusSODIMMDdr3SAO[] = {
+ {_1DIMM, DDR667 + DDR800, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00000000, 0x00002222, 0},
+ {_1DIMM, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000000, 0x10222323, 0},
+ {_1DIMM, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000000, 0x20222323, 0},
+ {_1DIMM, DDR1066, VOLT_ALL, NP, DIMM_SR, NP, 0, 0x003D3D3D, 0x10002222, 0},
+ {_1DIMM, DDR1066, VOLT_ALL, NP, DIMM_DR, NP, 0, 0x00000000, 0x10002222, 0},
+ {_1DIMM, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000000, 0x30222323, 0},
+ {_1DIMM, DDR1333, V1_5 + V1_35, NP, DIMM_SR, NP, 0, 0x003D3D3D, 0x20112222, 0},
+ {_1DIMM, DDR1333, V1_5 + V1_35, NP, DIMM_DR, NP, 0, 0x00003D3D, 0x20112222, 0},
+ {_1DIMM, DDR1333, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000000, 0x30222323, 0},
+ {_1DIMM, DDR1333, V1_35, DIMM_SR, DIMM_SR, NP, 1, 0x00000000, 0x30222323, 0},
+};
+CONST PSC_TBL_ENTRY KBSAOTblEntSoDwnPlusSODIMM3 = {
+ {PSCFG_SAO, SODWN_SODIMM_TYPE, _1DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBSoDwnPlusSODIMMDdr3SAO) / sizeof (PSCFG_SAO_ENTRY),
+ (VOID *)&KBSoDwnPlusSODIMMDdr3SAO
+};
+
+// Slow mode, POdtOff, Address timing and Output drive compensation for Solder-down DRAM ONLY configuration
+// Format :
+// DimmPerCh, DDRrate, VDDIO, Dimm0, Dimm1, Dimm2, SlowMode, AddTmgCtl, ODC, POdtOff
+//
+STATIC CONST PSCFG_SAO_ENTRY KBSoDwnDdr3SAO[] = {
+ {_DIMM_NONE, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00000000, 0x00000000, 1},
+ {_DIMM_NONE, DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00000000, 0x00000000, 0},
+ {_DIMM_NONE, DDR1066, VOLT_ALL, DIMM_SR, NP, NP, 0, 0x003D3D3D, 0x10000000, 0},
+ {_DIMM_NONE, DDR1066, VOLT_ALL, DIMM_DR, NP, NP, 0, 0x00000000, 0x10000000, 0},
+ {_DIMM_NONE, DDR1333, VOLT_ALL, DIMM_SR, NP, NP, 0, 0x003D3D3D, 0x20000000, 0},
+ {_DIMM_NONE, DDR1333, VOLT_ALL, DIMM_DR, NP, NP, 0, 0x00003D3D, 0x20110000, 0},
+ {_DIMM_NONE, DDR1600, V1_5 + V1_35, DIMM_SR, NP, NP, 0, 0x003C3C3C, 0x30110000, 0},
+ {_DIMM_NONE, DDR1600, V1_5 + V1_35, DIMM_DR, NP, NP, 1, 0x00003C3C, 0x30110000, 0},
+ {_DIMM_NONE, DDR1866, V1_5, DIMM_SR, NP, NP, 0, 0x003C3C3C, 0x30110000, 0},
+ {_DIMM_NONE, DDR1866, V1_5, DIMM_DR, NP, NP, 1, 0x00003C3C, 0x30110000, 0},
+};
+CONST PSC_TBL_ENTRY KBSAOTblEntSoDwn3 = {
+ {PSCFG_SAO, SODWN_SODIMM_TYPE, _DIMM_NONE, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBSoDwnDdr3SAO) / sizeof (PSCFG_SAO_ENTRY),
+ (VOID *)&KBSoDwnDdr3SAO
+};
+
+// Dram Term and Dynamic Dram Term for SODIMM ONLY configuration
+// Format :
+// DimmPerCh, DDRrate, VDDIO, Dimm0, Dimm1, Dimm2, Dimm, Rank, RttNom, RttWr
+//
+// RttNom:
+// 0 On die termination disabled
+// 1 60ohms
+// 2 120ohms
+// 3 40ohms
+// 4 20ohms
+// 5 30ohms
+// RttWr:
+// 0 Dynamic termination for writes disabled.
+// 1 60ohms
+// 2 120ohms
+STATIC CONST PSCFG_RTT_ENTRY KBDramTermSODIMM3[] = {
+ {_1DIMM, DDR667 + DDR800 + DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, DIMM_SR + DIMM_DR, R0 + R1, 2, 0},
+ {_1DIMM, DDR1333, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, DIMM_SR + DIMM_DR, R0 + R1, 1, 0},
+ {_1DIMM, DDR1600, V1_5 + V1_35, DIMM_SR + DIMM_DR, NP, NP, DIMM_SR + DIMM_DR, R0 + R1, 1, 0},
+ {_1DIMM, DDR1866, V1_5, DIMM_SR + DIMM_DR, NP, NP, DIMM_SR + DIMM_DR, R0 + R1, 1, 0},
+ {_2DIMM, DDR667 + DDR800 + DDR1066, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 2, 0},
+ {_2DIMM, DDR667 + DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 3, 2},
+ {_2DIMM, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 5, 2},
+ {_2DIMM, DDR1333, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 1, 0},
+ {_2DIMM, DDR1333, V1_5 + V1_35, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 5, 2},
+ {_2DIMM, DDR1333, V1_25, DIMM_SR, DIMM_SR, NP, DIMM_SR + DIMM_DR, R0 + R1, 5, 2},
+ {_2DIMM, DDR1600, V1_5 + V1_35, NP, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 1, 0},
+ {_2DIMM, DDR1600, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 4, 1},
+ {_2DIMM, DDR1600, V1_35, DIMM_SR, DIMM_SR, NP, DIMM_SR + DIMM_DR, R0 + R1, 4, 1},
+ {_2DIMM, DDR1866, V1_5, NP, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 1, 0},
+};
+CONST PSC_TBL_ENTRY KBDramTermTblEntSO3 = {
+ {PSCFG_RTT, SODIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBDramTermSODIMM3) / sizeof (PSCFG_RTT_ENTRY),
+ (VOID *)&KBDramTermSODIMM3
+};
+
+// Dram Term and Dynamic Dram Term for SODIMM plus Solder-down DRAM configuration
+// Format :
+// DimmPerCh, DDRrate, VDDIO, Dimm0, Dimm1, Dimm2, Dimm, Rank, RttNom, RttWr
+//
+// RttNom:
+// 0 On die termination disabled
+// 1 60ohms
+// 2 120ohms
+// 3 40ohms
+// 4 20ohms
+// 5 30ohms
+// RttWr:
+// 0 Dynamic termination for writes disabled.
+// 1 60ohms
+// 2 120ohms
+STATIC CONST PSCFG_RTT_ENTRY KBDramTermSoDwnPlusSODIMM3[] = {
+ {_1DIMM, DDR667 + DDR800 + DDR1066, VOLT_ALL, NP, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 2, 0},
+ {_1DIMM, DDR667 + DDR800, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 3, 2},
+ {_1DIMM, DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 5, 2},
+ {_1DIMM, DDR1333, V1_5 + V1_35, NP, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 1, 0},
+ {_1DIMM, DDR1333, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 5, 2},
+ {_1DIMM, DDR1333, V1_35, DIMM_SR, DIMM_SR, NP, DIMM_SR + DIMM_DR, R0 + R1, 5, 2},
+};
+CONST PSC_TBL_ENTRY KBDramTermTblEntSoDwnPlusSODIMM3 = {
+ {PSCFG_RTT, SODWN_SODIMM_TYPE, _1DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBDramTermSoDwnPlusSODIMM3) / sizeof (PSCFG_RTT_ENTRY),
+ (VOID *)&KBDramTermSoDwnPlusSODIMM3
+};
+
+// Dram Term and Dynamic Dram Term for Solder-down DRAM ONLY configuration
+// Format :
+// DimmPerCh, DDRrate, VDDIO, Dimm0, Dimm1, Dimm2, Dimm, Rank, RttNom, RttWr
+//
+// RttNom:
+// 0 On die termination disabled
+// 1 60ohms
+// 2 120ohms
+// 3 40ohms
+// 4 20ohms
+// 5 30ohms
+// RttWr:
+// 0 Dynamic termination for writes disabled.
+// 1 60ohms
+// 2 120ohms
+STATIC CONST PSCFG_RTT_ENTRY KBDramTermSoDwn3[] = {
+ {_DIMM_NONE, DDR667, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, DIMM_SR + DIMM_DR, R0 + R1, 0, 0},
+ {_DIMM_NONE, DDR800 + DDR1066, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, DIMM_SR + DIMM_DR, R0 + R1, 2, 0},
+ {_DIMM_NONE, DDR1333, VOLT_ALL, DIMM_SR + DIMM_DR, NP, NP, DIMM_SR + DIMM_DR, R0 + R1, 1, 0},
+ {_DIMM_NONE, DDR1600, V1_5 + V1_35, DIMM_SR + DIMM_DR, NP, NP, DIMM_SR + DIMM_DR, R0 + R1, 1, 0},
+ {_DIMM_NONE, DDR1866, V1_5, DIMM_SR + DIMM_DR, NP, NP, DIMM_SR + DIMM_DR, R0 + R1, 1, 0},
+};
+CONST PSC_TBL_ENTRY KBDramTermTblEntSoDwn3 = {
+ {PSCFG_RTT, SODWN_SODIMM_TYPE, _DIMM_NONE, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBDramTermSoDwn3) / sizeof (PSCFG_RTT_ENTRY),
+ (VOID *)&KBDramTermSoDwn3
+};
+
+// Max Freq. for SODIMM ONLY <6-layer Motherboard Design> configuration
+// Format :
+// DimmPerCh, Dimms, SR, DR, QR, Speed1_5V, Speed1_35V, Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA KBMaxFreqSODIMM6L[] = {
+ {{_1DIMM, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1600_FREQUENCY, DDR1333_FREQUENCY}},
+ {{_1DIMM, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1600_FREQUENCY, DDR1333_FREQUENCY}},
+ {{_2DIMM, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1600_FREQUENCY, DDR1333_FREQUENCY}},
+ {{_2DIMM, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1600_FREQUENCY, DDR1333_FREQUENCY}},
+ {{_2DIMM, 2, 2, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1333_FREQUENCY}},
+ {{_2DIMM, 2, 1, 1, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_2DIMM, 2, 0, 2, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+};
+CONST PSC_TBL_ENTRY KBMaxFreqTblEntSO6L = {
+ {PSCFG_MAXFREQ, SODIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBMaxFreqSODIMM6L) / sizeof (PSCFG_MAXFREQ_ENTRY),
+ (VOID *)&KBMaxFreqSODIMM6L
+};
+
+// Max Freq. for SODIMM ONLY <4-layer Motherboard Design> configuration
+// Format :
+// DimmPerCh, Dimms, SR, DR, QR, Speed1_5V, Speed1_35V, Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA KBMaxFreqSODIMM4L[] = {
+ {{_1DIMM, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_1DIMM, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_2DIMM, 1, 1, 0, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_2DIMM, 1, 0, 1, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_2DIMM, 2, 2, 0, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_2DIMM, 2, 1, 1, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_2DIMM, 2, 0, 2, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+};
+CONST PSC_TBL_ENTRY KBMaxFreqTblEntSO4L = {
+ {PSCFG_MAXFREQ, SODIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBMaxFreqSODIMM4L) / sizeof (PSCFG_MAXFREQ_ENTRY),
+ (VOID *)&KBMaxFreqSODIMM4L
+};
+
+// Max Freq. for SODIMM plus Solder-down DRAM <6-layer Motherboard Design> configuration
+// Format :
+// DimmPerCh, Dimms, SR, DR, QR, Speed1_5V, Speed1_35V, Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA KBMaxFreqSoDwnPlusSODIMM6L[] = {
+ {{_1DIMM, 1, 1, 0, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_1DIMM, 1, 0, 1, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_1DIMM, 2, 2, 0, 0, DDR1333_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_1DIMM, 2, 1, 1, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_1DIMM, 2, 0, 2, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+};
+CONST PSC_TBL_ENTRY KBMaxFreqTblEntSoDwnPlusSODIMM6L = {
+ {PSCFG_MAXFREQ, SODWN_SODIMM_TYPE, _1DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBMaxFreqSoDwnPlusSODIMM6L) / sizeof (PSCFG_MAXFREQ_ENTRY),
+ (VOID *)&KBMaxFreqSoDwnPlusSODIMM6L
+};
+
+// Max Freq. for SODIMM plus Solder-down DRAM <4-layer Motherboard Design> configuration
+// Format :
+// DimmPerCh, Dimms, SR, DR, QR, Speed1_5V, Speed1_35V, Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA KBMaxFreqSoDwnPlusSODIMM4L[] = {
+ {{_1DIMM, 1, 1, 0, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_1DIMM, 1, 0, 1, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_1DIMM, 2, 2, 0, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_1DIMM, 2, 1, 1, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_1DIMM, 2, 0, 2, 0, DDR1066_FREQUENCY, DDR1066_FREQUENCY, DDR1066_FREQUENCY}},
+};
+CONST PSC_TBL_ENTRY KBMaxFreqTblEntSoDwnPlusSODIMM4L = {
+ {PSCFG_MAXFREQ, SODWN_SODIMM_TYPE, _1DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBMaxFreqSoDwnPlusSODIMM4L) / sizeof (PSCFG_MAXFREQ_ENTRY),
+ (VOID *)&KBMaxFreqSoDwnPlusSODIMM4L
+};
+
+// Max Freq. for Solder-down DRAM ONLY <4-layer/6-layer Motherboard Design> configuration
+// Format :
+// DimmPerCh, Dimms, SR, DR, QR, Speed1_5V, Speed1_35V, Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA KBMaxFreqSoDwn[] = {
+ {{_DIMM_NONE, 1, 1, 0, 0, DDR1600_FREQUENCY, DDR1600_FREQUENCY, DDR1066_FREQUENCY}},
+ {{_DIMM_NONE, 1, 0, 1, 0, DDR1600_FREQUENCY, DDR1600_FREQUENCY, DDR1066_FREQUENCY}},
+};
+CONST PSC_TBL_ENTRY KBMaxFreqTblEntSoDwn = {
+ {PSCFG_MAXFREQ, SODWN_SODIMM_TYPE, _DIMM_NONE, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBMaxFreqSoDwn) / sizeof (PSCFG_MAXFREQ_ENTRY),
+ (VOID *)&KBMaxFreqSoDwn
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/KB/mpUkb3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/KB/mpUkb3.c
new file mode 100644
index 0000000..c18af0a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/KB/mpUkb3.c
@@ -0,0 +1,180 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpUkb3.c
+ *
+ * Platform specific settings for KB DDR3 UDIMM system
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps/KB)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_KB_MPUKB3_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+// Slow mode, POdtOff, Address timing and Output drive compensation
+// Format :
+// DimmPerCh, DDRrate, VDDIO, Dimm0, Dimm1, Dimm2, SlowMode, AddTmgCtl, ODC, POdtOff
+//
+STATIC CONST PSCFG_SAO_ENTRY KBUDdr3SAO[] = {
+ {_1DIMM, DDR667 + DDR800, V1_5, DIMM_SR + DIMM_DR, NP, NP, 0, 0x00000000, 0x00002222, 0},
+ {_1DIMM, DDR1066, V1_5, DIMM_SR, NP, NP, 0, 0x003D3D3D, 0x10002222, 0},
+ {_1DIMM, DDR1066, V1_5, DIMM_DR, NP, NP, 0, 0x00000000, 0x10002222, 0},
+ {_1DIMM, DDR1333, V1_5, DIMM_SR, NP, NP, 0, 0x003D3D3D, 0x20112222, 0},
+ {_1DIMM, DDR1333, V1_5, DIMM_DR, NP, NP, 0, 0x00003D3D, 0x20112222, 0},
+ {_1DIMM, DDR1600 + DDR1866, V1_5, DIMM_SR, NP, NP, 0, 0x003C3C3C, 0x30332222, 0},
+ {_1DIMM, DDR1600 + DDR1866, V1_5, DIMM_DR, NP, NP, 1, 0x00003C3C, 0x30332222, 0},
+ {_2DIMM, DDR667 + DDR800, V1_5, NP, DIMM_SR + DIMM_DR, NP, 0, 0x00000000, 0x00002222, 0},
+ {_2DIMM, DDR667, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000000, 0x10222323, 0},
+ {_2DIMM, DDR800, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000000, 0x20222323, 0},
+ {_2DIMM, DDR1066, V1_5, NP, DIMM_SR, NP, 0, 0x003D3D3D, 0x10002222, 0},
+ {_2DIMM, DDR1066, V1_5, NP, DIMM_DR, NP, 0, 0x00000000, 0x10002222, 0},
+ {_2DIMM, DDR1066 + DDR1333 + DDR1600, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, 1, 0x00000000, 0x30222323, 0},
+ {_2DIMM, DDR1333, V1_5, NP, DIMM_SR, NP, 0, 0x003D3D3D, 0x20112222, 0},
+ {_2DIMM, DDR1333, V1_5, NP, DIMM_DR, NP, 0, 0x00003D3D, 0x20112222, 0},
+ {_2DIMM, DDR1600 + DDR1866, V1_5, NP, DIMM_SR, NP, 0, 0x003C3C3C, 0x30332222, 0},
+ {_2DIMM, DDR1600 + DDR1866, V1_5, NP, DIMM_DR, NP, 1, 0x00003C3C, 0x30332222, 0},
+};
+CONST PSC_TBL_ENTRY KBSAOTblEntU3 = {
+ {PSCFG_SAO, UDIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBUDdr3SAO) / sizeof (PSCFG_SAO_ENTRY),
+ (VOID *)&KBUDdr3SAO
+};
+
+// Dram Term and Dynamic Dram Term
+// Format :
+// DimmPerCh, DDRrate, VDDIO, Dimm0, Dimm1, Dimm2, Dimm, Rank, RttNom, RttWr
+//
+// RttNom:
+// 0 On die termination disabled
+// 1 60ohms
+// 2 120ohms
+// 3 40ohms
+// 4 20ohms
+// 5 30ohms
+// RttWr:
+// 0 Dynamic termination for writes disabled.
+// 1 60ohms
+// 2 120ohms
+STATIC CONST PSCFG_RTT_ENTRY DramTermKBUDIMM[] = {
+ {_1DIMM, DDR667 + DDR800 + DDR1066, V1_5, DIMM_SR + DIMM_DR, NP, NP, DIMM_SR + DIMM_DR, R0 + R1, 2, 0},
+ {_1DIMM, DDR1333 + DDR1600 + DDR1866, V1_5, DIMM_SR + DIMM_DR, NP, NP, DIMM_SR + DIMM_DR, R0 + R1, 1, 0},
+ {_2DIMM, DDR667 + DDR800 + DDR1066, V1_5, NP, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 2, 0},
+ {_2DIMM, DDR667 + DDR800, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 3, 2},
+ {_2DIMM, DDR1066 + DDR1333, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 5, 2},
+ {_2DIMM, DDR1333 + DDR1600 + DDR1866, V1_5, NP, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 1, 0},
+ {_2DIMM, DDR1600, V1_5, DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, NP, DIMM_SR + DIMM_DR, R0 + R1, 4, 1},
+};
+CONST PSC_TBL_ENTRY KBDramTermTblEntU = {
+ {PSCFG_RTT, UDIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (DramTermKBUDIMM) / sizeof (PSCFG_RTT_ENTRY),
+ (VOID *)&DramTermKBUDIMM
+};
+
+// Max Freq. for UDIMM <6-layer Motherboard Design> configuration
+// Format :
+// DimmPerCh, Dimms, SR, DR, QR, Speed1_5V, Speed1_35V, Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA MaxFreqKBUDIMM6L[] = {
+ {{_1DIMM, 1, 1, 0, 0, DDR1600_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+ {{_1DIMM, 1, 0, 1, 0, DDR1600_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+ {{_2DIMM, 1, 1, 0, 0, DDR1600_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+ {{_2DIMM, 1, 0, 1, 0, DDR1600_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+ {{_2DIMM, 2, 2, 0, 0, DDR1600_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+ {{_2DIMM, 2, 1, 1, 0, DDR1333_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+ {{_2DIMM, 2, 0, 2, 0, DDR1333_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+};
+CONST PSC_TBL_ENTRY KBMaxFreqTblEntU6L = {
+ {PSCFG_MAXFREQ, UDIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (MaxFreqKBUDIMM6L) / sizeof (PSCFG_MAXFREQ_ENTRY),
+ (VOID *)&MaxFreqKBUDIMM6L
+};
+
+// Max Freq. for UDIMM <4-layer Motherboard Design> configuration
+// Format :
+// DimmPerCh, Dimms, SR, DR, QR, Speed1_5V, Speed1_35V, Speed1_25V
+//
+STATIC CONST PSCFG_MAXFREQ_ENTRY ROMDATA MaxFreqKBUDIMM4L[] = {
+ {{_1DIMM, 1, 1, 0, 0, DDR1600_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+ {{_1DIMM, 1, 0, 1, 0, DDR1600_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+ {{_2DIMM, 1, 1, 0, 0, DDR1600_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+ {{_2DIMM, 1, 0, 1, 0, DDR1600_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+ {{_2DIMM, 2, 2, 0, 0, DDR1600_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+ {{_2DIMM, 2, 1, 1, 0, DDR1333_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+ {{_2DIMM, 2, 0, 2, 0, DDR1333_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY, UNSUPPORTED_DDR_FREQUENCY}},
+};
+CONST PSC_TBL_ENTRY KBMaxFreqTblEntU4L = {
+ {PSCFG_MAXFREQ, UDIMM_TYPE, _1DIMM + _2DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (MaxFreqKBUDIMM4L) / sizeof (PSCFG_MAXFREQ_ENTRY),
+ (VOID *)&MaxFreqKBUDIMM4L
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/KB/mpkb3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/KB/mpkb3.c
new file mode 100644
index 0000000..2e4a2ee
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/KB/mpkb3.c
@@ -0,0 +1,172 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpkb3.c
+ *
+ * Platform specific settings for KB
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps/KB)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "mport.h"
+#include "ma.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "mm.h"
+#include "mn.h"
+#include "mp.h"
+#include "Filecode.h"
+
+CODE_GROUP (G3_DXE)
+RDATA_GROUP (G3_DXE)
+
+
+
+#define FILECODE PROC_MEM_PS_KB_MPKB3_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*
+ *-----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *-----------------------------------------------------------------------------
+ */
+//
+// Common tables of KB platform specific configuration
+//
+
+// MR0[WR]
+// Format :
+// D18F2x22C_dct[1:0][Twr], MR0[WR]
+//
+CONST PSCFG_MR0WR_ENTRY KBMR0WR[] = {
+ {0x10, 0},
+ {0x05, 1},
+ {0x06, 2},
+ {0x07, 3},
+ {0x08, 4},
+ {0x0A, 5},
+ {0x0C, 6},
+ {0x0E, 7},
+ {0x12, 9}
+};
+CONST PSC_TBL_ENTRY KBMR0WrTblEntry = {
+ {PSCFG_MR0WR, DT_DONT_CARE, NOD_DONT_CARE, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBMR0WR) / sizeof (PSCFG_MR0WR_ENTRY),
+ (VOID *)&KBMR0WR
+};
+
+// MR0[CL]
+// Format :
+// D18F2x200_dct[1:0][Tcl], MR0[CL][3:1], MR0[CL][0]
+//
+CONST PSCFG_MR0CL_ENTRY KBMR0CL[] = {
+ {0x05, 1, 0},
+ {0x06, 2, 0},
+ {0x07, 3, 0},
+ {0x08, 4, 0},
+ {0x09, 5, 0},
+ {0x0A, 6, 0},
+ {0x0B, 7, 0},
+ {0x0C, 0, 1},
+ {0x0D, 1, 1},
+ {0x0E, 2, 1},
+ {0x0F, 3, 1},
+ {0x10, 4, 1}
+};
+CONST PSC_TBL_ENTRY KBMR0CLTblEntry = {
+ {PSCFG_MR0CL, DT_DONT_CARE, NOD_DONT_CARE, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBMR0CL) / sizeof (PSCFG_MR0CL_ENTRY),
+ (VOID *)&KBMR0CL
+};
+
+// ODT pattern for 1 DPC
+// Format:
+// Dimm0, RdODTCSHigh, RdODTCSLow, WrODTCSHigh, WrODTCSLow
+//
+STATIC CONST PSCFG_1D_ODTPAT_ENTRY KB1DOdtPat[] = {
+ {DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00000001},
+ {DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x00000201},
+};
+CONST PSC_TBL_ENTRY KB1DOdtPatTblEnt = {
+ {PSCFG_ODT_PAT_1D, DT_DONT_CARE, _1DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KB1DOdtPat) / sizeof (PSCFG_1D_ODTPAT_ENTRY),
+ (VOID *)&KB1DOdtPat
+};
+
+// ODT pattern for 2 DPC
+// Format:
+// Dimm0, Dimm1 RdODTCSHigh, RdODTCSLow, WrODTCSHigh, WrODTCSLow
+//
+STATIC CONST PSCFG_2D_ODTPAT_ENTRY KB2DOdtPat[] = {
+ {NP, DIMM_SR, 0x00000000, 0x00000000, 0x00000000, 0x00040000},
+ {NP, DIMM_DR, 0x00000000, 0x00000000, 0x00000000, 0x08040000},
+ {DIMM_SR + DIMM_DR, DIMM_SR + DIMM_DR, 0x00000000, 0x01010404, 0x00000000, 0x09050605}
+};
+CONST PSC_TBL_ENTRY KB2DOdtPatTblEnt = {
+ {PSCFG_ODT_PAT_2D, DT_DONT_CARE, _2DIMM, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KB2DOdtPat) / sizeof (PSCFG_2D_ODTPAT_ENTRY),
+ (VOID *)&KB2DOdtPat
+};
+
+//
+// CKE tri-state
+//
+STATIC CONST UINT8 ROMDATA KBDdr3CKETri[] = {0xFF, 0xFF, 0xFF, 0xFF};
+CONST PSC_TBL_ENTRY KBDdr3CKETriEnt = {
+ {PSCFG_CKETRI, DT_DONT_CARE, NOD_DONT_CARE, {AMD_FAMILY_16_KB, AMD_F16_ALL}, PT_DONT_CARE, DDR3_TECHNOLOGY},
+ sizeof (KBDdr3CKETri) / sizeof (UINT8),
+ (VOID *)&KBDdr3CKETri
+};
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mp.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mp.c
new file mode 100644
index 0000000..348f704
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mp.c
@@ -0,0 +1,1336 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mp.c
+ *
+ * Common platform specific configuration.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 85646 $ @e \$Date: 2013-01-10 03:52:13 -0600 (Thu, 10 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_MP_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define PSO_TYPE 0
+#define PSO_LENGTH 1
+#define PSO_DATA 2
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemPPSCGen (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ );
+
+BOOLEAN
+STATIC
+MemPCheckTblDrvOverrideConfig (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+BOOLEAN
+STATIC
+MemPCheckTblDrvOverrideConfigSpeedLimit (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+VOID
+STATIC
+MemPTblDrvOverrideSpeedLimit (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+UINT8
+STATIC
+MemPTblDrvOverrideODT (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+VOID
+STATIC
+MemPTblDrvOverrideODTPattern (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+UINT8
+STATIC
+MemPTblDrvOverrideRC2IBT (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer,
+ IN UINT8 NumOfReg
+ );
+
+BOOLEAN
+STATIC
+MemPTblDrvOverrideMR0WR (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+BOOLEAN
+STATIC
+MemPTblDrvOverrideMR0CL (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+BOOLEAN
+STATIC
+MemPTblDrvOverrideMR10OpSpeed (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This is the default return function of the Platform Specific block. The function always
+ * returns AGESA_UNSUPPORTED
+ *
+ * @param[in,out] *MemPtr Pointer to MEM_DATA_STRUCTURE
+ * @param[in] *ChannelPtr Pointer to CH_DEF_STRUCT
+ * @param[in] *PsPtr Pointer to MEM_PS_BLOCK
+ *
+ * @return AGESA_UNSUPPORTED AGESA status indicating that default is unsupported
+ *
+ */
+
+AGESA_STATUS
+MemPConstructPsUDef (
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN OUT CH_DEF_STRUCT *ChannelPtr,
+ IN OUT MEM_PS_BLOCK *PsPtr
+ )
+{
+ return AGESA_UNSUPPORTED;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function will set the DramTerm and DramTermDyn in the structure of a channel.
+ *
+ * @param[in,out] *NBPtr Pointer to MEM_NB_BLOCK
+ * @param[in] ArraySize Size of the array of DramTerm
+ * @param[in] *DramTermPtr Address the array of DramTerm
+ *
+ * @return TRUE - Find DramTerm and DramTermDyn for corresponding platform and dimm population.
+ * @return FALSE - Fail to find DramTerm and DramTermDyn for corresponding platform and dimm population.
+ *
+ */
+BOOLEAN
+MemPGetDramTerm (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 ArraySize,
+ IN CONST DRAM_TERM_ENTRY *DramTermPtr
+ )
+{
+ UINT8 Dimms;
+ UINT8 QR_Dimms;
+ UINT8 i;
+ Dimms = NBPtr->ChannelPtr->Dimms;
+ QR_Dimms = 0;
+ for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i ++) {
+ if (((NBPtr->ChannelPtr->DimmQrPresent & (UINT16) (1 << i)) != 0) && (i < 2)) {
+ QR_Dimms ++;
+ }
+ }
+
+ for (i = 0; i < ArraySize; i ++) {
+ if ((DramTermPtr[i].Speed & ((UINT32) 1 << (NBPtr->DCTPtr->Timings.Speed / 66))) != 0) {
+ if ((((UINT8) (1 << (Dimms - 1)) & DramTermPtr[i].Dimms) != 0) || (DramTermPtr[i].Dimms == ANY_NUM)) {
+ if (((QR_Dimms == 0) && (DramTermPtr[i].QR_Dimms == NO_DIMM)) ||
+ ((QR_Dimms > 0) && (((UINT8) (1 << (QR_Dimms - 1)) & DramTermPtr[i].QR_Dimms) != 0)) ||
+ (DramTermPtr[i].QR_Dimms == ANY_NUM)) {
+ NBPtr->PsPtr->DramTerm = DramTermPtr[i].DramTerm;
+ NBPtr->PsPtr->QR_DramTerm = DramTermPtr[i].QR_DramTerm;
+ NBPtr->PsPtr->DynamicDramTerm = DramTermPtr[i].DynamicDramTerm;
+ break;
+ }
+ }
+ }
+ }
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets the highest POR supported speed.
+ *
+ * @param[in,out] *NBPtr Pointer to MEM_NB_BLOCK
+ * @param[in] FreqLimitSize Size of the array of Frequency Limit
+ * @param[in] *FreqLimitPtr Address the array of Frequency Limit
+ *
+ * @return UINT8 - frequency limit
+ *
+ */
+UINT16
+MemPGetPorFreqLimit (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 FreqLimitSize,
+ IN CONST POR_SPEED_LIMIT *FreqLimitPtr
+ )
+{
+ UINT8 i;
+ UINT8 j;
+ UINT8 DimmTpMatch;
+ UINT16 SpeedLimit;
+ UINT16 DIMMRankType;
+ UINT16 _DIMMRankType;
+
+ SpeedLimit = 0;
+ DIMMRankType = MemAGetPsRankType (NBPtr->ChannelPtr);
+ for (i = 0; i < FreqLimitSize; i++, FreqLimitPtr++) {
+ if (NBPtr->ChannelPtr->Dimms != FreqLimitPtr->Dimms) {
+ continue;
+ }
+ DimmTpMatch = 0;
+ _DIMMRankType = DIMMRankType & FreqLimitPtr->DIMMRankType;
+ for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j ++) {
+ if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
+ DimmTpMatch++;
+ }
+ }
+ if (DimmTpMatch == FreqLimitPtr->Dimms) {
+ if (NBPtr->RefPtr->DDR3Voltage == VOLT1_5) {
+ SpeedLimit = FreqLimitPtr->SpeedLimit_1_5V;
+ break;
+ } else if (NBPtr->RefPtr->DDR3Voltage == VOLT1_25) {
+ SpeedLimit = FreqLimitPtr->SpeedLimit_1_25V;
+ break;
+ } else {
+ SpeedLimit = FreqLimitPtr->SpeedLimit_1_35V;
+ break;
+ }
+ }
+ }
+
+ return SpeedLimit;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function is the default function for getting POR speed limit. When a
+ * package does not need to cap the speed, it should use this function to initialize
+ * the corresponding function pointer.
+ *
+ * @param[in,out] *NBPtr Pointer to MEM_NB_BLOCK
+ *
+ */
+VOID
+MemPGetPORFreqLimitDef (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets the seed value of WL and HW RxEn pass 1 training.
+ *
+ * @param[in,out] *NBPtr Pointer to MEM_NB_BLOCK
+ *
+ * @return TRUE - Entries are found
+ * @return FALSE - Entries are not found
+ *
+ */
+BOOLEAN
+MemPGetPSCPass1Seed (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 i;
+ UINT8 Dct;
+
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ i = 0;
+ while (memPlatSpecFlowArray[i] != NULL) {
+ if (!(memPlatSpecFlowArray[i])->TrainingSeedVal (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ return FALSE;
+ }
+ i++;
+ }
+ }
+
+ return TRUE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets platform specific configuration such as Max Freq., Slow Mode, Dram Term,
+ * and so on.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ * @return TRUE - Successfully execute platform specific configuration flow.
+ * @return FALSE - Fail to execute platform specific configuration flow.
+ *
+ */
+BOOLEAN
+MemPPSCFlow (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 i;
+ BOOLEAN Result;
+
+ Result = TRUE;
+ i = 0;
+
+ IDS_OPTION_HOOK (IDS_BEFORE_PLAT_TABLES, NBPtr, &(NBPtr->MemPtr->StdHeader));
+
+ while (memPlatSpecFlowArray[i] != NULL) {
+ if ((memPlatSpecFlowArray[i])->DramTerm (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ if ((memPlatSpecFlowArray[i])->ODTPattern (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ if ((memPlatSpecFlowArray[i])->SAO (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ if ((memPlatSpecFlowArray[i])->MR0WrCL (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ if ((memPlatSpecFlowArray[i])->RC2IBT (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ if ((memPlatSpecFlowArray[i])->RC10OpSpeed (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ if ((memPlatSpecFlowArray[i])->LRIBT (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ if ((memPlatSpecFlowArray[i])->LRNPR (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ if ((memPlatSpecFlowArray[i])->LRNLR (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ if (MemPPSCGen (NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ break;
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ i++;
+ }
+
+ IDS_SKIP_HOOK (IDS_ENFORCE_PLAT_TABLES, NBPtr, &(NBPtr->MemPtr->StdHeader)) {
+ if (memPlatSpecFlowArray[i] == NULL) {
+ Result = FALSE;
+ }
+ }
+ return Result;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function constructs the rank type map of Dimm0, Dimm1, Dimm2. Also it counts the number
+ * of dimm in the table.
+ *
+ * @param[in] Dimm0 Rank type of Dimm0
+ * @param[in] Dimm1 Rank type of Dimm1
+ * @param[in] Dimm2 Rank type of Dimm2
+ * @param[in, out] *RankTypeInTable Pointer to RankTypeInTable variable
+ *
+ *
+ */
+VOID
+MemPConstructRankTypeMap (
+ IN UINT16 Dimm0,
+ IN UINT16 Dimm1,
+ IN UINT16 Dimm2,
+ IN OUT UINT16 *RankTypeInTable
+ )
+{
+ UINT8 i;
+ UINT16 RT;
+ UINT8 BitShift;
+
+ *RankTypeInTable = 0;
+ RT = 0;
+ BitShift = 0;
+
+ for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+ switch (i) {
+ case 0:
+ RT = (Dimm0 == 0) ? NP : Dimm0;
+ BitShift = 0;
+ break;
+ case 1:
+ RT = (Dimm1 == 0) ? NP : Dimm1;
+ BitShift = 4;
+ break;
+ case 2:
+ RT = (Dimm2 == 0) ? NP : Dimm2;
+ BitShift = 8;
+ break;
+ default:
+ // dimm3 is not used, fills nibble3 with "NP"
+ RT = NP;
+ BitShift = 12;
+ }
+ *RankTypeInTable |= RT << BitShift;
+ }
+}
+
+/*-----------------------------------------------------------------------------*/
+/**
+ * MemPIsIdSupported
+ * This function matches the CPU_LOGICAL_ID and PackageType with certain criteria to
+ * determine if it is supported by this NB type.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] LogicalId - CPU_LOGICAL_ID
+ * @param[in] PackageType - Package Type
+ *
+ * @return TRUE - NB type is matched !
+ * @return FALSE - NB type is not matched !
+ *
+ */
+BOOLEAN
+MemPIsIdSupported (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN CPU_LOGICAL_ID LogicalId,
+ IN UINT8 PackageType
+ )
+{
+ CPUID_DATA CpuId;
+ UINT8 PkgType;
+
+ LibAmdCpuidRead (AMD_CPUID_FMF, &CpuId, &(NBPtr->MemPtr->StdHeader));
+ PkgType = (UINT8) (CpuId.EBX_Reg >> 28) & 0xF; // bit 31:28
+
+ if (((NBPtr->MCTPtr->LogicalCpuid.Family & LogicalId.Family) != 0)
+ && ((NBPtr->MCTPtr->LogicalCpuid.Revision & LogicalId.Revision) != 0)) {
+ if ((PackageType == PT_DONT_CARE) || (PackageType == PkgType)) {
+ return TRUE;
+ }
+ }
+ return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function returns the rank type map of a channel.
+ *
+ * @param[in] *CurrentChannel Pointer to CH_DEF_STRUCT
+ *
+ * @return UINT16 - The map of rank type.
+ *
+ */
+UINT16
+MemPGetPsRankType (
+ IN CH_DEF_STRUCT *CurrentChannel
+ )
+{
+ UINT8 i;
+ UINT16 DIMMRankType;
+
+ DIMMRankType = 0;
+ for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+ if (CurrentChannel->MCTPtr->Status[SbLrdimms]) {
+ // For LrDimm, we construct the map according to Dimm present bits rather than rank type bits
+ if ((CurrentChannel->LrDimmPresent & (UINT8) 1 << i) != 0) {
+ DIMMRankType |= (UINT16) DIMM_LR << (i << 2);
+ } else {
+ DIMMRankType |= (UINT16) NP << (i << 2);
+ }
+ } else {
+ if ((CurrentChannel->DimmQrPresent & (UINT8) 1 << i) != 0) {
+ if (i < 2) {
+ DIMMRankType |= (UINT16) DIMM_QR << (i << 2);
+ }
+ } else if ((CurrentChannel->DimmDrPresent & (UINT8) 1 << i) != 0) {
+ DIMMRankType |= (UINT16) DIMM_DR << (i << 2);
+ } else if ((CurrentChannel->DimmSRPresent & (UINT8) 1 << i) != 0) {
+ DIMMRankType |= (UINT16) DIMM_SR << (i << 2);
+ } else {
+ DIMMRankType |= (UINT16) NP << (i << 2);
+ }
+ }
+ }
+
+ return DIMMRankType;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function performs the action for the rest of platform specific configuration such as
+ * tri-state stuff
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *EntryOfTables Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ * @return TRUE - No error occurred.
+ * @return FALSE - Error occurred.
+ *
+ */
+BOOLEAN
+STATIC
+MemPPSCGen (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ )
+{
+ UINT8 i;
+ PSCFG_TYPE PSCType;
+ DIMM_TYPE DimmType;
+ UINT8 MaxDimmPerCh;
+ UINT8 NOD;
+ CPU_LOGICAL_ID LogicalCpuid;
+ UINT8 PackageType;
+ CH_DEF_STRUCT *CurrentChannel;
+ UINT32 EventInfo;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+
+ PackageType = 0;
+ LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+ MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+ NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+ if (CurrentChannel->RegDimmPresent != 0) {
+ DimmType = RDIMM_TYPE;
+ } else if (CurrentChannel->SODimmPresent != 0) {
+ DimmType = SODIMM_TYPE;
+ } else if (CurrentChannel->LrDimmPresent != 0) {
+ DimmType = LRDIMM_TYPE;
+ } else {
+ DimmType = UDIMM_TYPE;
+ }
+
+ for (PSCType = PSCFG_GEN_START + 1; PSCType < PSCFG_GEN_END; PSCType++) {
+ i = 0;
+ while (EntryOfTables->TblEntryOfGen[i] != NULL) {
+ if ((EntryOfTables->TblEntryOfGen[i])->Header.PSCType == PSCType) {
+ if (((EntryOfTables->TblEntryOfGen[i])->Header.DimmType & DimmType) != 0) {
+ if (((EntryOfTables->TblEntryOfGen[i])->Header.NumOfDimm & NOD) != 0) {
+ //
+ // Determine if this is the expected NB Type
+ //
+ LogicalCpuid = (EntryOfTables->TblEntryOfGen[i])->Header.LogicalCpuid;
+ PackageType = (EntryOfTables->TblEntryOfGen[i])->Header.PackageType;
+ if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+ break;
+ }
+ }
+ }
+ }
+ i++;
+ }
+
+ // Check whether no table entry is found.
+ if (EntryOfTables->TblEntryOfGen[i] == NULL) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nNo %s Table\n", (PSCType == PSCFG_CLKDIS) ? "ClkDis" : ((PSCType == PSCFG_CKETRI) ? "CkeTri" : ((PSCType == PSCFG_ODTTRI) ? "OdtTri" : "CsTri")));
+ EventInfo = (PSCType == PSCFG_CLKDIS) ? MEM_ERROR_CLK_DIS_MAP_NOT_FOUND : ((PSCType == PSCFG_CKETRI) ? MEM_ERROR_CKE_TRI_MAP_NOT_FOUND : ((PSCType == PSCFG_ODTTRI) ? MEM_ERROR_ODT_TRI_MAP_NOT_FOUND : MEM_ERROR_CS_TRI_MAP_NOT_FOUND));
+ PutEventLog (AGESA_ERROR, EventInfo, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+ if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ }
+ return FALSE;
+ }
+
+ // Perform the action for specific PSCType.
+ if (PSCType == PSCFG_CLKDIS) {
+ CurrentChannel->MemClkDisMap = (UINT8 *) (EntryOfTables->TblEntryOfGen[i])->TBLPtr;
+ } else if (PSCType == PSCFG_CKETRI) {
+ CurrentChannel->CKETriMap = (UINT8 *) (EntryOfTables->TblEntryOfGen[i])->TBLPtr;
+ } else if (PSCType == PSCFG_ODTTRI) {
+ CurrentChannel->ODTTriMap = (UINT8 *) (EntryOfTables->TblEntryOfGen[i])->TBLPtr;
+ } else if (PSCType == PSCFG_CSTRI) {
+ CurrentChannel->ChipSelTriMap = (UINT8 *) (EntryOfTables->TblEntryOfGen[i])->TBLPtr;
+ }
+ }
+
+ CurrentChannel->DctEccDqsLike = 0x0403;
+ CurrentChannel->DctEccDqsScale = 0x70;
+
+ return TRUE;
+}
+
+
+ /* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function proceeds Table Driven Overriding.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] PlatformMemoryConfiguration - Pointer to Platform config table
+ * @param[in] ProceededPSOType - Proceeded PSO type
+ *
+ * @return bit0 ~ bit7 - Overriding CS or DIMM map.
+ * @return bit15 - Invalid entry found if set.
+ *
+ */
+UINT16
+MemPProceedTblDrvOverride (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 ProceededPSOType
+ )
+{
+ UINT8 *Buffer;
+ UINT8 *PSOStartPtr;
+ UINT8 NumOfReg;
+ UINT8 RetVal;
+ UINT16 RetVal16;
+ BOOLEAN ConfigMatched;
+ BOOLEAN FirstGoThrough;
+ BOOLEAN FindNewConfig;
+ BOOLEAN InvertRetVal;
+ BOOLEAN InvalidConfigDetected;
+
+
+ ASSERT (PlatformMemoryConfiguration != NULL);
+ ASSERT ((ProceededPSOType >= PSO_TBLDRV_START) && (ProceededPSOType <= PSO_TBLDRV_END));
+
+ NumOfReg = 0;
+ RetVal = 0;
+ RetVal16 = 0;
+ FirstGoThrough = TRUE;
+ InvertRetVal = FALSE;
+ InvalidConfigDetected = FALSE;
+ //
+ // << P E R S P E C T I V E >>
+ //
+ // PlatformMemoryConfiguration [] = {
+ // . . . . . . . . . . . . . . . . . . .
+ // . . . . . . . . . . . . . . . . . . .
+ // TBLDRV_CONFIG_TO_OVERRIDE (2, DDR1600, VOLT1_5_ + VOLT1_35_, SR_DIMM0 + DR_DIMM1),
+ // TBLDRV_CONFIG_ENTRY_RTTNOM (CS2_ + CS3_, 2),
+ // TBLDRV_CONFIG_ENTRY_RTTWR (CS2_, 2),
+ // TBLDRV_CONFIG_ENTRY_RTTWR (CS3_, 1),
+ // TBLDRV_CONFIG_ENTRY_ADDRTMG (0x003C3C3C),
+ // TBLDRV_CONFIG_ENTRY_ODCCTRL (0x20112222),
+ //
+ // TBLDRV_SPEEDLIMIT_CONFIG_TO_OVERRIDE (2, 2, 0, 0)
+ // TBLDRV_CONFIG_ENTRY_SPEEDLIMIT (DDR1600_FREQUENCY, DDR1333_FREQUENCY, DDR1066_FREQUENCY),
+ //
+ // TBLDRV_CONFIG_TO_OVERRIDE (2, DDR1333, VOLT1_5_ + VOLT1_35_, SR_DIMM0 + DR_DIMM1),
+ // TBLDRV_CONFIG_ENTRY_RTTNOM (CS2_ + CS3_, 3),
+ // TBLDRV_CONFIG_ENTRY_RTTWR (CS2_ + CS3_, 0),
+ //
+ // TBLDRV_OVERRIDE_MR0_WR (3, 5)
+ // TBLDRV_OVERRIDE_MR0_WR (4, 6)
+ //
+ // TBLDRV_OVERRIDE_MR0_CL (3, 5)
+ // TBLDRV_OVERRIDE_MR0_CL (4, 6)
+ // . . . . . . . . . . . . . . . . . . .
+ // . . . . . . . . . . . . . . . . . . .
+ //
+ // PSO_END
+ // }
+ //
+ Buffer = PlatformMemoryConfiguration;
+ // Look for configuration descriptor and its sub-descriptor.
+ while (Buffer[PSO_TYPE] != PSO_END) {
+ FindNewConfig = FALSE;
+ ConfigMatched = FALSE;
+ if (Buffer[PSO_TYPE] == PSO_TBLDRV_CONFIG) {
+ //
+ // Config. descriptor is found, check its sub-descriptor to execute different checking routine.
+ //
+ if ((Buffer[PSO_DATA] == CONFIG_SPEEDLIMIT) && (ProceededPSOType == PSO_TBLDRV_SPEEDLIMIT)) {
+ if (MemPCheckTblDrvOverrideConfigSpeedLimit (NBPtr, &Buffer[PSO_DATA + 1])) {
+ ConfigMatched = TRUE;
+ }
+ } else if (Buffer[PSO_DATA] == CONFIG_DONT_CARE) {
+ ConfigMatched = TRUE;
+ } else {
+ if (MemPCheckTblDrvOverrideConfig (NBPtr, &Buffer[PSO_DATA + 1])) {
+ ConfigMatched = TRUE;
+ if ((Buffer[PSO_DATA] == CONFIG_RC2IBT) && (ProceededPSOType == PSO_TBLDRV_RC2_IBT)) {
+ NumOfReg = Buffer[PSO_DATA + 9];
+ }
+ }
+ }
+ }
+
+ if (ConfigMatched) {
+ //
+ // If config. is matched, parsing "Table Driven PSO" macros behinds this config. macro until PSO_END is reached.
+ //
+ PSOStartPtr = Buffer + (Buffer[PSO_LENGTH] + 2);
+ // Look for the current proceeded PSO type in PlatformMemoryConfiguration array.
+ while ((PSOStartPtr[PSO_TYPE] != PSO_END)) {
+ if (PSOStartPtr[PSO_TYPE] == PSO_TBLDRV_CONFIG) {
+ //
+ // If there is an additional config. macro existed, break this while loop,
+ // then check its content with real platform config. again.
+ // If matched, parsing "Table Driven PSO" macros behind it.
+ //
+ Buffer = PSOStartPtr;
+ FindNewConfig = TRUE;
+ break;
+ } else if (PSOStartPtr[PSO_TYPE] == PSO_TBLDRV_INVALID_TYPE) {
+ InvalidConfigDetected = TRUE;
+ break;
+ }
+
+ if (PSOStartPtr[PSO_TYPE] == ProceededPSOType) {
+ //
+ // Pre-set overriding Cs/Dimm map to "0xFF" for the types which are regardless of Cs/Dimm
+ // for the first time going through the overriding routines.
+ //
+ if (FirstGoThrough) {
+ RetVal = 0xFF;
+ }
+ switch (ProceededPSOType) {
+ case PSO_TBLDRV_SPEEDLIMIT :
+ MemPTblDrvOverrideSpeedLimit (NBPtr, &PSOStartPtr[PSO_DATA]);
+ break;
+
+ case PSO_TBLDRV_ODT_RTTNOM :
+ case PSO_TBLDRV_ODT_RTTWR :
+ // Mask off Cs overridng map to record which Cs has been overridden.
+ RetVal &= ~ MemPTblDrvOverrideODT (NBPtr, &PSOStartPtr[PSO_TYPE]);
+ // Indicate RetVal is inverted.
+ InvertRetVal = TRUE;
+ break;
+
+ case PSO_TBLDRV_ODTPATTERN :
+ MemPTblDrvOverrideODTPattern (NBPtr, &PSOStartPtr[PSO_DATA]);
+ break;
+
+ case PSO_TBLDRV_ADDRTMG :
+ NBPtr->ChannelPtr->DctAddrTmg = *(UINT32 *)&PSOStartPtr[PSO_DATA];
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: AddrTmg = 0x%x for Dct%d\n\n", *(UINT32 *)&PSOStartPtr[PSO_DATA], NBPtr->Dct);
+ break;
+
+ case PSO_TBLDRV_ODCCTRL :
+ NBPtr->ChannelPtr->DctOdcCtl = *(UINT32 *)&PSOStartPtr[PSO_DATA];
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: OdcCtl = 0x%x for Dct%d\n\n", *(UINT32 *)&PSOStartPtr[PSO_DATA], NBPtr->Dct);
+ break;
+
+ case PSO_TBLDRV_SLOWACCMODE :
+ NBPtr->ChannelPtr->SlowMode = (PSOStartPtr[PSO_DATA] == 1) ? TRUE : FALSE;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: Slow Access Mode = %d for Dct%d\n\n", PSOStartPtr[PSO_DATA], NBPtr->Dct);
+ break;
+
+ case PSO_TBLDRV_RC2_IBT :
+ // Mask off Dimm overridng map to record which Dimm has been overridden.
+ RetVal &= ~ MemPTblDrvOverrideRC2IBT (NBPtr, &PSOStartPtr[PSO_DATA], NumOfReg);
+ // Indicate RetVal is inverted.
+ InvertRetVal = TRUE;
+ break;
+
+ case PSO_TBLDRV_MR0_CL :
+ RetVal = 0;
+ if (MemPTblDrvOverrideMR0WR (NBPtr, &PSOStartPtr[PSO_DATA])) {
+ RetVal = 0xFF;
+ }
+ break;
+
+ case PSO_TBLDRV_MR0_WR :
+ RetVal = 0;
+ if (MemPTblDrvOverrideMR0CL (NBPtr, &PSOStartPtr[PSO_DATA])) {
+ RetVal = 0xFF;
+ }
+ break;
+
+ case PSO_TBLDRV_RC10_OPSPEED :
+ RetVal = 0;
+ if (MemPTblDrvOverrideMR10OpSpeed (NBPtr, &PSOStartPtr[PSO_DATA])) {
+ RetVal = 0xFF;
+ }
+ break;
+
+ case PSO_TBLDRV_LRDIMM_IBT :
+ NBPtr->PsPtr->F0RC8 = PSOStartPtr[PSO_DATA];
+ NBPtr->PsPtr->F1RC0 = PSOStartPtr[PSO_DATA + 1];
+ NBPtr->PsPtr->F1RC1 = PSOStartPtr[PSO_DATA + 2];
+ NBPtr->PsPtr->F1RC2 = PSOStartPtr[PSO_DATA + 3];
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: LRDIMM IBT for Dct%d\n", NBPtr->Dct);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nF0RC8 = %d, F1RC0 = %d, F1RC1 = %d, F1RC2 = %d", PSOStartPtr[PSO_DATA], PSOStartPtr[PSO_DATA + 1], \
+ PSOStartPtr[PSO_DATA + 2], PSOStartPtr[PSO_DATA + 3]);
+ break;
+
+ case PSO_TBLDRV_2D_TRAINING :
+ RetVal = 0x1;
+ NBPtr->Override2DTraining = (PSOStartPtr[PSO_DATA] == 1) ? TRUE : FALSE;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: 2D Trainig = %d for Dct%d\n\n", PSOStartPtr[PSO_DATA], NBPtr->Dct);
+ break;
+
+ default:
+ ASSERT (FALSE);
+ }
+ FirstGoThrough = FALSE;
+ }
+ PSOStartPtr += (PSOStartPtr[PSO_LENGTH] + 2);
+ }
+
+ if (FindNewConfig) {
+ continue;
+ }
+ RetVal = (InvertRetVal) ? ~RetVal : RetVal;
+ RetVal16 = (UINT16) RetVal;
+ if (InvalidConfigDetected) {
+ RetVal16 |= INVALID_CONFIG_FLAG;
+ }
+
+ return RetVal16;
+ }
+ Buffer += (Buffer[PSO_LENGTH] + 2);
+ }
+
+ RetVal = (InvertRetVal) ? ~RetVal : RetVal;
+ RetVal16 = (UINT16) RetVal;
+ if (InvalidConfigDetected) {
+ RetVal16 |= INVALID_CONFIG_FLAG;
+ }
+ return RetVal16;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function overrides the speed limit.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Buffer - Pointer to Platform config table
+ *
+ */
+VOID
+STATIC
+MemPTblDrvOverrideSpeedLimit (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ UINT8 CurrentVoltage;
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: Max. Memory Speed for Dct%d\n", NBPtr->Dct);
+
+ LibAmdMemCopy (NBPtr->PsPtr->SpeedLimit, Buffer, 6, &(NBPtr->MemPtr->StdHeader));
+
+ for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%s -> %dMHz\t", (CurrentVoltage == VOLT1_5_ENCODED_VAL) ? "1.5V" : ((CurrentVoltage == VOLT1_35_ENCODED_VAL) ? "1.35V" : "1.25V"), NBPtr->PsPtr->SpeedLimit[CurrentVoltage]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function overrides the ODTs (RttNom and RttWr).
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Buffer - Pointer to Platform config table
+ *
+ * @return Target CS overriding bit map
+ *
+ */
+UINT8
+STATIC
+MemPTblDrvOverrideODT (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ UINT16 i;
+ UINT8 TgtCS;
+
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: ODT for Dct%d\n", NBPtr->Dct);
+ if (Buffer[0] == PSO_TBLDRV_ODT_RTTNOM) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "RttNom = %d for ", Buffer[3]);
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, "RttWr = %d for ", Buffer[3]);
+ }
+ );
+
+ TgtCS = Buffer[2];
+ for (i = 0; i < MAX_CS_PER_CHANNEL; i++) {
+ if ((NBPtr->DCTPtr->Timings.CsEnabled & (UINT16) (1 << i)) != 0) {
+ if ((TgtCS & (UINT8) 1 << i) != 0) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "CS%d ", i);
+ if (Buffer[0] == PSO_TBLDRV_ODT_RTTNOM) {
+ NBPtr->PsPtr->RttNom[i] = Buffer[3];
+ } else {
+ NBPtr->PsPtr->RttWr[i] = Buffer[3];
+ }
+ }
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+
+ return TgtCS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function overrides the ODT patterns.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Buffer - Pointer to Platform config table
+ *
+ */
+VOID
+STATIC
+MemPTblDrvOverrideODTPattern (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ CH_DEF_STRUCT *CurrentChannel;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: ODT pattern for Dct%d\n", NBPtr->Dct);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nRODTCSHigh = 0x%x\n", *(UINT32 *)&Buffer[0]);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nRODTCSLow = 0x%x\n", *(UINT32 *)&Buffer[4]);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nWODTCSHigh = 0x%x\n", *(UINT32 *)&Buffer[8]);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nWODTCSLow = 0x%x\n", *(UINT32 *)&Buffer[12]);
+
+ CurrentChannel->PhyRODTCSHigh = *(UINT32 *)&Buffer[0];
+ CurrentChannel->PhyRODTCSLow = *(UINT32 *)&Buffer[4];
+ CurrentChannel->PhyWODTCSHigh = *(UINT32 *)&Buffer[8];
+ CurrentChannel->PhyWODTCSLow = *(UINT32 *)&Buffer[12];
+
+ //WL ODTs need to be modified as well while overriding...
+ CurrentChannel->PhyWLODT[0] = (UINT8) (CurrentChannel->PhyWODTCSLow & 0x0F);
+ CurrentChannel->PhyWLODT[1] = (UINT8) ((CurrentChannel->PhyWODTCSLow >> 16) & 0x0F);
+ CurrentChannel->PhyWLODT[2] = (UINT8) (CurrentChannel->PhyWODTCSHigh & 0x0F);
+ CurrentChannel->PhyWLODT[3] = (UINT8) ((CurrentChannel->PhyWODTCSHigh >> 16) & 0x0F);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function overrides the Ctrl Word 2 and 8.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Buffer - Pointer to Platform config table
+ * @param[in] NumOfReg - Number of registers
+ *
+ * @return Target DIMM overridng bit map
+ *
+ */
+UINT8
+STATIC
+MemPTblDrvOverrideRC2IBT (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer,
+ IN UINT8 NumOfReg
+ )
+{
+ UINT16 i;
+ UINT8 TgtDimm;
+ CH_DEF_STRUCT *CurrentChannel;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: RC2[IBT] for Dct%d\n", NBPtr->Dct);
+ IDS_HDT_CONSOLE (MEM_FLOW, "RC2[IBT] = %d for ", Buffer[1]);
+
+ TgtDimm = Buffer[0];
+ for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+ if ((CurrentChannel->ChDimmValid & (UINT16) (1 << i)) != 0) {
+ if (((TgtDimm & (UINT8) 1 << i) != 0) && (NBPtr->PsPtr->NumOfReg[i] == NumOfReg)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "DIMM%d ", i);
+ CurrentChannel->CtrlWrd02[i] = (Buffer[1] & 0x1) << 2;
+ CurrentChannel->CtrlWrd08[i] = (Buffer[1] & 0xE) >> 1;
+ }
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+
+ return TgtDimm;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function overrides MR0[WR].
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Buffer - Pointer to Platform config table
+ *
+ * @return TRUE : Overridden
+ * @return FALSE : Not overriden
+ *
+ */
+BOOLEAN
+STATIC
+MemPTblDrvOverrideMR0WR (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ if (Buffer[0] == (UINT8) NBPtr->GetBitField (NBPtr, BFTcl)) {
+ NBPtr->PsPtr->MR0CL31 = Buffer[1];
+ NBPtr->PsPtr->MR0CL0 = Buffer[2];
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: MR0[CL][3:1] = %d,\tMR0[CL][0] = %d for Dct%d\n", \
+ Buffer[1], Buffer[2], NBPtr->Channel);
+ IDS_HDT_CONSOLE (MEM_FLOW, "Tcl = %d\n\n", (UINT8) NBPtr->GetBitField (NBPtr, BFTcl));
+ return TRUE;
+ }
+ return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function overrides MR0[WR].
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Buffer - Pointer to Platform config table
+ *
+ * @return TRUE : Overridden
+ * @return FALSE : Not overriden
+ *
+ */
+BOOLEAN
+STATIC
+MemPTblDrvOverrideMR0CL (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ if (Buffer[0] == (UINT8) NBPtr->GetBitField (NBPtr, BFTwrDDR3)) {
+ NBPtr->PsPtr->MR0WR = Buffer[1];
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: MR0[WR] = %d for Dct%d\n", Buffer[1], NBPtr->Dct);
+ IDS_HDT_CONSOLE (MEM_FLOW, "Twr = %d\n\n", (UINT8) NBPtr->GetBitField (NBPtr, BFTwrDDR3));
+ return TRUE;
+ }
+ return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function overrides MR10[OperatingSpeed].
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Buffer - Pointer to Platform config table
+ *
+ * @return TRUE : Overridden
+ * @return FALSE : Not overriden
+ *
+ */
+BOOLEAN
+STATIC
+MemPTblDrvOverrideMR10OpSpeed (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ UINT32 CurDDRrate;
+ CH_DEF_STRUCT *CurrentChannel;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+ CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+
+ if ((Buffer[0] & CurDDRrate) != 0) {
+ NBPtr->PsPtr->RC10OpSpd = Buffer[1];
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nTable Driven Platform Override: MR10[OperatingSpeed] = %d for Dct%d\n", Buffer[1], NBPtr->Dct);
+ return TRUE;
+ }
+ return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function checks if platform configuration is matched or not.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Buffer - Pointer to Platform config table
+ *
+ * @return TRUE : Configuration is matched
+ * @return FALSE : Configuration is not matched
+ *
+ */
+BOOLEAN
+STATIC
+MemPCheckTblDrvOverrideConfig (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ UINT8 MaxDimmPerCh;
+ UINT32 CurDDRrate;
+ UINT8 DDR3Voltage;
+ UINT16 RankTypeOfPopulatedDimm;
+ CH_DEF_STRUCT *CurrentChannel;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+
+ // Get platform configuration.
+ MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+ CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+ DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+ RankTypeOfPopulatedDimm = MemAGetPsRankType (CurrentChannel);
+
+ if ((MaxDimmPerCh == Buffer[0]) && ((DDR3Voltage & Buffer[1]) != 0) &&
+ ((CurDDRrate & *(UINT32 *)&Buffer[2]) != 0) && ((RankTypeOfPopulatedDimm & *(UINT16 *)&Buffer[6]) != 0)) {
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function checks if platform configuration is matched or not.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *Buffer - Pointer to Platform config table
+ *
+ * @return TRUE : Configuration is matched
+ * @return FALSE : Configuration is not matched
+ *
+ */
+BOOLEAN
+STATIC
+MemPCheckTblDrvOverrideConfigSpeedLimit (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 *Buffer
+ )
+{
+ UINT8 MaxDimmPerCh;
+ UINT8 NumOfSR;
+ UINT8 NumOfDR;
+ UINT8 NumOfQR;
+ UINT8 NumOfLRDimm;
+ UINT8 i;
+ CH_DEF_STRUCT *CurrentChannel;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+ NumOfSR = 0;
+ NumOfDR = 0;
+ NumOfQR = 0;
+ NumOfLRDimm = 0;
+
+ // Get platform configuration.
+ MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+
+ for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+ if ((CurrentChannel->DimmSRPresent & (UINT8) (1 << i)) != 0) {
+ NumOfSR += 1;
+ } else if ((CurrentChannel->DimmDrPresent & (UINT16) (1 << i)) != 0) {
+ NumOfDR += 1;
+ } else if ((CurrentChannel->DimmQrPresent & (UINT16) (1 << i)) != 0) {
+ if (i < 2) {
+ NumOfQR += 1;
+ }
+ } else if ((CurrentChannel->LrDimmPresent & (UINT16) (1 << i))) {
+ NumOfLRDimm += 1;
+ }
+ }
+
+ if ((Buffer[0] == MaxDimmPerCh) && (Buffer[1] == CurrentChannel->Dimms)) {
+ if (NBPtr->MCTPtr->Status[SbLrdimms] == TRUE) {
+ if (Buffer[5] == NumOfLRDimm) {
+ return TRUE;
+ }
+ } else {
+ if ((Buffer[2] == NumOfSR) && (Buffer[3] == NumOfDR) && (Buffer[4] == NumOfQR)) {
+ return TRUE;
+ }
+ }
+ }
+
+ return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Prepare PS table look-up conditions (ie. DIMM type, rank type,...)
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ *
+ */
+VOID
+MemPPreparePsTabLookupConditions (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ UINT8 MaxDimmPerCh;
+ UINT8 MaxDimmSlotPerCh;
+ DIMM_TYPE DimmType;
+ CPU_LOGICAL_ID LogicalCpuid;
+ UINT8 PackageType;
+ CH_DEF_STRUCT *CurrentChannel;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+
+ PackageType = 0;
+ LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+
+ MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+ MaxDimmSlotPerCh = MaxDimmPerCh - GetMaxSolderedDownDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+
+ if (CurrentChannel->RegDimmPresent != 0) {
+ DimmType = RDIMM_TYPE;
+ } else if (CurrentChannel->SODimmPresent != 0) {
+ DimmType = SODIMM_TYPE;
+ } else if (CurrentChannel->LrDimmPresent != 0) {
+ DimmType = LRDIMM_TYPE;
+ } else {
+ DimmType = UDIMM_TYPE;
+ }
+
+ // Check if it is "SODIMM plus soldered-down DRAM" or "Soldered-down DRAM only" configuration,
+ // DimmType is changed to 'SODWN_SODIMM_TYPE' if soldered-down DRAM exist
+ if (MaxDimmSlotPerCh != MaxDimmPerCh) {
+ // SODIMM plus soldered-down DRAM
+ DimmType = SODWN_SODIMM_TYPE;
+ } else if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_SOLDERED_DOWN_SODIMM_TYPE, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) != NULL) {
+ // Soldered-down DRAM only
+ DimmType = SODWN_SODIMM_TYPE;
+ MaxDimmSlotPerCh = 0;
+ }
+
+ NBPtr->PsPtr->NumOfDimmSlots = (UINT8) (MaxDimmSlotPerCh != 0) ? (1 << (MaxDimmSlotPerCh - 1)) : _DIMM_NONE;
+ NBPtr->PsPtr->DimmType = (UINT8) DimmType;
+ NBPtr->PsPtr->RankType = MemPGetPsRankType (CurrentChannel);
+
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Select and return the pointer to the table that supports currently populated
+ * processor, DIMMs, and platform
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *ListOfTables - Pointer to PSC_TBL_ENTRY array of pointers
+ * @param[in] *TableSize - Size of the selected table
+ *
+ * @return Pointer to the selected PSC_TBL_ENTRY table
+ *
+ */
+PSC_TBL_ENTRY *
+MemPGetTableEntry (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN PSC_TBL_ENTRY *ListOfTables[],
+ OUT UINT8 *TableSize
+ )
+{
+ UINT8 i;
+ CPU_LOGICAL_ID LogicalCpuid;
+ UINT8 PackageType;
+
+ PackageType = 0;
+ LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+
+ i = 0;
+ // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+ while (ListOfTables[i] != NULL) {
+ if (((ListOfTables[i])->Header.DimmType & NBPtr->PsPtr->DimmType) != 0) {
+ if (((ListOfTables[i])->Header.NumOfDimm & NBPtr->PsPtr->NumOfDimmSlots) != 0) {
+ //
+ // Determine if this is the expected NB Type
+ //
+ LogicalCpuid = (ListOfTables[i])->Header.LogicalCpuid;
+ PackageType = (ListOfTables[i])->Header.PackageType;
+ if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+ *TableSize = (ListOfTables[i])->TableSize;
+ break;
+ }
+ }
+ }
+ i++;
+ }
+
+ // Check whether no table entry is found.
+ if (ListOfTables[i] == NULL) {
+ return NULL;
+ } else {
+ return ((ListOfTables[i])->TBLPtr);
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mpmaxfreq.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mpmaxfreq.c
new file mode 100644
index 0000000..1302396
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mpmaxfreq.c
@@ -0,0 +1,325 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpmaxfreq.c
+ *
+ * A sub-engine which extracts max. frequency limit value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_MPMAXFREQ_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+typedef struct {
+ UINT16 Dimms:4;
+ UINT16 SR:4;
+ UINT16 DR:4;
+ UINT16 QR:4;
+} CDNMaxFreq;
+
+typedef struct {
+ UINT16 Dimms:4;
+ UINT16 LR:12;
+} CDNLMaxFreq;
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetMaxFreqSupported (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * A sub-function which extracts the value of max frequency supported from a input table and
+ * compares it with DCTPtr->Timings.TargetSpeed
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *EntryOfTables - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ * @return TRUE - Succeed in extracting the table value
+ * @return FALSE - Fail to extract the table value
+ *
+ */
+BOOLEAN
+MemPGetMaxFreqSupported (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ )
+{
+ UINT8 i;
+ UINT8 MaxDimmSlotPerCh;
+ UINT8 MaxDimmPerCh;
+ UINT8 NOD;
+ UINT8 TableSize;
+ PSCFG_TYPE Type;
+ UINT16 CDN;
+ UINT16 MaxFreqSupported;
+ UINT16 *SpeedArray;
+ UINT8 DDR3Voltage;
+ UINT8 CurrentVoltage;
+ DIMM_TYPE DimmType;
+ CPU_LOGICAL_ID LogicalCpuid;
+ UINT8 PackageType;
+ BOOLEAN DisDct;
+ UINT8 PsoMaskMaxFreq;
+ UINT16 PsoMaskMaxFreq16;
+ UINT8 NumDimmSlotInTable;
+ UINT16 DimmPopInTable;
+ PSCFG_MAXFREQ_ENTRY *TblPtr;
+ CH_DEF_STRUCT *CurrentChannel;
+ PSC_TBL_ENTRY **TblEntryOfMaxFreq;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+
+ DisDct = FALSE;
+ Type = PSCFG_MAXFREQ;
+ TblPtr = NULL;
+ TableSize = 0;
+ PackageType = 0;
+ NumDimmSlotInTable = 0;
+ DimmPopInTable = 0;
+ LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+ SpeedArray = NULL;
+
+ MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+ MaxDimmSlotPerCh = MaxDimmPerCh - GetMaxSolderedDownDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+
+ if (CurrentChannel->RegDimmPresent != 0) {
+ DimmType = RDIMM_TYPE;
+ } else if (CurrentChannel->SODimmPresent != 0) {
+ DimmType = SODIMM_TYPE;
+ } else if (CurrentChannel->LrDimmPresent != 0) {
+ DimmType = LRDIMM_TYPE;
+ } else {
+ DimmType = UDIMM_TYPE;
+ }
+
+ // Check if it is "SODIMM plus soldered-down DRAM" or "Soldered-down DRAM only" configuration,
+ // DimmType is changed to 'SODWN_SODIMM_TYPE' if soldered-down DRAM exist
+ if (MaxDimmSlotPerCh != MaxDimmPerCh) {
+ // SODIMM plus soldered-down DRAM
+ DimmType = SODWN_SODIMM_TYPE;
+ } else if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_SOLDERED_DOWN_SODIMM_TYPE, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) != NULL) {
+ // Soldered-down DRAM only
+ DimmType = SODWN_SODIMM_TYPE;
+ MaxDimmSlotPerCh = 0;
+ }
+ NOD = (UINT8) (MaxDimmSlotPerCh != 0) ? (1 << (MaxDimmSlotPerCh - 1)) : _DIMM_NONE;
+
+ TblEntryOfMaxFreq = EntryOfTables->TblEntryOfMaxFreq;
+ IDS_OPTION_HOOK (IDS_GET_STRETCH_FREQUENCY_LIMIT, &TblEntryOfMaxFreq, &NBPtr->MemPtr->StdHeader);
+
+ NBPtr->FamilySpecificHook[RelocatePscTblEntryByMotherBoardLayer] (NBPtr, (VOID *) &TblEntryOfMaxFreq);
+
+ i = 0;
+ // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+ while (TblEntryOfMaxFreq[i] != NULL) {
+ if (((TblEntryOfMaxFreq[i])->Header.DimmType & DimmType) != 0) {
+ if (((TblEntryOfMaxFreq[i])->Header.NumOfDimm & NOD) != 0) {
+ //
+ // Determine if this is the expected NB Type
+ //
+ LogicalCpuid = (TblEntryOfMaxFreq[i])->Header.LogicalCpuid;
+ PackageType = (TblEntryOfMaxFreq[i])->Header.PackageType;
+ if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+ TblPtr = (PSCFG_MAXFREQ_ENTRY *) ((TblEntryOfMaxFreq[i])->TBLPtr);
+ TableSize = (TblEntryOfMaxFreq[i])->TableSize;
+ Type = (TblEntryOfMaxFreq[i])->Header.PSCType;
+ break;
+ }
+ }
+ }
+ i++;
+ }
+
+ // Check whether no table entry is found.
+ if (TblEntryOfMaxFreq[i] == NULL) {
+ return FALSE;
+ }
+
+ MaxFreqSupported = UNSUPPORTED_DDR_FREQUENCY;
+ CDN = 0;
+ DDR3Voltage = (UINT8) CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage);
+
+ // Construct the condition value
+ ((CDNMaxFreq *)&CDN)->Dimms = CurrentChannel->Dimms;
+ if (Type == PSCFG_MAXFREQ) {
+ for (i = 0; i < MAX_DIMMS_PER_CHANNEL; i++) {
+ if ((CurrentChannel->DimmSRPresent & (UINT8) (1 << i)) != 0) {
+ ((CDNMaxFreq *)&CDN)->SR += 1;
+ }
+ if ((CurrentChannel->DimmDrPresent & (UINT16) (1 << i)) != 0) {
+ ((CDNMaxFreq *)&CDN)->DR += 1;
+ }
+ if ((CurrentChannel->DimmQrPresent & (UINT16) (1 << i)) != 0) {
+ if (i < 2) {
+ ((CDNMaxFreq *)&CDN)->QR += 1;
+ }
+ }
+ }
+ } else {
+ ((CDNLMaxFreq *)&CDN)->LR = CurrentChannel->Dimms;
+ }
+
+ for (i = 0; i < TableSize; i++) {
+ NumDimmSlotInTable = TblPtr->MAXFREQ_ENTRY.DimmSlotPerCh;
+ DimmPopInTable = (Type == PSCFG_MAXFREQ) ? TblPtr->MAXFREQ_ENTRY.CDN : ((PSCFG_LR_MAXFREQ_ENTRY *)TblPtr)->LR_MAXFREQ_ENTRY.CDN;
+ if (((NumDimmSlotInTable & NOD) != 0) && (CDN == DimmPopInTable)) {
+ if (Type == PSCFG_MAXFREQ) {
+ SpeedArray = TblPtr->MAXFREQ_ENTRY.Speed;
+ } else {
+ SpeedArray = ((PSCFG_LR_MAXFREQ_ENTRY *)TblPtr)->LR_MAXFREQ_ENTRY.Speed;
+ }
+ break;
+ }
+ TblPtr++;
+ }
+
+ PsoMaskMaxFreq16 = MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_SPEEDLIMIT);
+ if ((PsoMaskMaxFreq16 & INVALID_CONFIG_FLAG) == 0) {
+ PsoMaskMaxFreq = (UINT8) PsoMaskMaxFreq16;
+ if (PsoMaskMaxFreq != 0) {
+ SpeedArray = NBPtr->PsPtr->SpeedLimit;
+ }
+ } else {
+ SpeedArray = NULL;
+ }
+
+ if (SpeedArray != NULL) {
+ if (NBPtr->SharedPtr->VoltageMap != VDDIO_DETERMINED) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nCheck speed supported for each VDDIO for Node%d DCT%d: ", NBPtr->Node, NBPtr->Dct);
+ for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
+ if (NBPtr->SharedPtr->VoltageMap & (1 << CurrentVoltage)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%s -> %dMHz ", (CurrentVoltage == VOLT1_5_ENCODED_VAL) ? "1.5V" : ((CurrentVoltage == VOLT1_35_ENCODED_VAL) ? "1.35V" : "1.25V"), SpeedArray[CurrentVoltage]);
+ if (NBPtr->DCTPtr->Timings.TargetSpeed > SpeedArray[CurrentVoltage]) {
+ MaxFreqSupported = SpeedArray[CurrentVoltage];
+ } else {
+ MaxFreqSupported = NBPtr->DCTPtr->Timings.TargetSpeed;
+ }
+ if (NBPtr->MaxFreqVDDIO[CurrentVoltage] > MaxFreqSupported) {
+ NBPtr->MaxFreqVDDIO[CurrentVoltage] = MaxFreqSupported;
+ }
+ } else {
+ NBPtr->MaxFreqVDDIO[CurrentVoltage] = 0;
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ }
+ ASSERT (DDR3Voltage <= VOLT1_25_ENCODED_VAL);
+ for (CurrentVoltage = DDR3Voltage; CurrentVoltage >= VOLT1_5_ENCODED_VAL; CurrentVoltage --) {
+ if (NBPtr->SharedPtr->VoltageMap & (1 << CurrentVoltage)) {
+ MaxFreqSupported = SpeedArray[CurrentVoltage];
+ if (MaxFreqSupported != UNSUPPORTED_DDR_FREQUENCY) {
+ NBPtr->RefPtr->DDR3Voltage = CONVERT_ENCODED_TO_VDDIO (CurrentVoltage);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nVDDIO leveraged to %s\n", (CurrentVoltage == VOLT1_5_ENCODED_VAL) ? "1.5V" : ((CurrentVoltage == VOLT1_35_ENCODED_VAL) ? "1.35V" : "1.25V"));
+ break;
+ }
+ }
+ }
+ }
+
+ if (MaxFreqSupported == UNSUPPORTED_DDR_FREQUENCY) {
+ // No entry in the table for current dimm population is found
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nDCT %d: No entry is found in the Max Frequency table\n", NBPtr->Dct);
+ DisDct = TRUE;
+ } else if (MaxFreqSupported != 0) {
+ if ((NBPtr->DCTPtr->Timings.TargetSpeed > MaxFreqSupported) && !NBPtr->IsSupported[AMPIsEnabled]) {
+ NBPtr->DCTPtr->Timings.TargetSpeed = MaxFreqSupported;
+ }
+ } else if (NBPtr->SharedPtr->VoltageMap == VDDIO_DETERMINED) {
+ // Dimm population is not supported at current voltage
+ // Also if there is no performance optimization, disable the DCT
+ DisDct = TRUE;
+ }
+
+ if (DisDct) {
+ NBPtr->DCTPtr->Timings.DimmExclude |= NBPtr->DCTPtr->Timings.DctDimmValid;
+ PutEventLog (AGESA_ERROR, MEM_ERROR_UNSUPPORTED_DIMM_CONFIG, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+ // Change target speed to highest value so it won't affect other channels when leveling frequency across the node.
+ NBPtr->DCTPtr->Timings.TargetSpeed = UNSUPPORTED_DDR_FREQUENCY;
+ }
+
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mpmr0.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mpmr0.c
new file mode 100644
index 0000000..feb3807
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mpmr0.c
@@ -0,0 +1,195 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpmr0.c
+ *
+ * A sub-engine which extracts MR0[WR] and MR0[CL] value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_MPMR0_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetMR0WrCL (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * A sub-function which extracts MR0[WR] or MR0[CL] value from a input table and store the
+ * value to a specific address.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *EntryOfTables - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ * @return TRUE - Succeed in extracting the table value
+ * @return FALSE - Fail to extract the table value
+ *
+ */
+BOOLEAN
+MemPGetMR0WrCL (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ )
+{
+
+ UINT8 i;
+ UINT8 j;
+ UINT8 p;
+ UINT32 Value32;
+ UINT8 TableSize;
+ PSCFG_TYPE Type;
+ CPU_LOGICAL_ID LogicalCpuid;
+ UINT8 PackageType;
+ UINT8 PsoMaskMR0;
+ PSCFG_MR0CL_ENTRY *TblPtr;
+ PSC_TBL_ENTRY **ptr;
+ CH_DEF_STRUCT *CurrentChannel;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+ TblPtr = NULL;
+ TableSize = 0;
+ PsoMaskMR0 = 0;
+
+ // Extract MR0[WR] value, then MR0[CL] value
+ for (i = 0; i < 2; i++) {
+ if (i == 0) {
+ ptr = EntryOfTables->TblEntryOfMR0WR;
+ Type = PSCFG_MR0WR;
+ } else {
+ ptr = EntryOfTables->TblEntryOfMR0CL;
+ Type = PSCFG_MR0CL;
+ }
+
+ p = 0;
+ // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+ while (ptr[p] != NULL) {
+ //
+ // Determine if this is the expected NB Type
+ //
+ LogicalCpuid = (ptr[p])->Header.LogicalCpuid;
+ PackageType = (ptr[p])->Header.PackageType;
+ if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+ TblPtr = (PSCFG_MR0CL_ENTRY *) ((ptr[p])->TBLPtr);
+ TableSize = (ptr[p])->TableSize;
+ break;
+ }
+ p++;
+ }
+
+ // Check whether no table entry is found.
+ if (ptr[p] == NULL) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nNo MR0 table\n");
+ return FALSE;
+ }
+
+ Value32 = (Type == PSCFG_MR0WR) ? NBPtr->GetBitField (NBPtr, BFTwrDDR3) : NBPtr->GetBitField (NBPtr, BFTcl);
+ for (j = 0; j < TableSize; j++, TblPtr++) {
+ if (Value32 == (UINT32) TblPtr->Timing) {
+ if (Type == PSCFG_MR0WR) {
+ NBPtr->PsPtr->MR0WR = (UINT8) TblPtr->Value;
+ break;
+ } else {
+ NBPtr->PsPtr->MR0CL31 = (UINT8) TblPtr->Value;
+ NBPtr->PsPtr->MR0CL0 = (UINT8) TblPtr->Value1;
+ break;
+ }
+ }
+ }
+
+ //
+ // If there is no entry, check if overriding value existed. If not, return FALSE.
+ //
+ PsoMaskMR0 = (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, ((i == 0) ? PSO_TBLDRV_MR0_WR : PSO_TBLDRV_MR0_CL));
+ if ((PsoMaskMR0 == 0) && (j == TableSize)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, (i == 0) ? "\nNo MR0[WR] entries\n" : "\nNo MR0[CL] entries\n");
+ PutEventLog (AGESA_ERROR, MEM_ERROR_MR0_NOT_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+ if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ }
+ return FALSE;
+ }
+ }
+
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mpodtpat.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mpodtpat.c
new file mode 100644
index 0000000..b763cd4
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mpodtpat.c
@@ -0,0 +1,216 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpodtpat.c
+ *
+ * A sub-engine which extracts ODT pattern value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+#define FILECODE PROC_MEM_PS_MPODTPAT_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetODTPattern (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * A sub-function which extracts ODT Pattern value from a input table and stores extracted
+ * value to a specific address.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *EntryOfTables - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ * @return TRUE - Table values can be extracted per dimm population and ranks type.
+ * @return FALSE - Table values cannot be extracted per dimm population and ranks type.
+ *
+ */
+BOOLEAN
+MemPGetODTPattern (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ )
+{
+ UINT8 i;
+ UINT16 RankTypeInTable;
+ UINT16 RankTypeOfPopulatedDimm;
+ UINT8 MaxDimmPerCh;
+ UINT8 NOD;
+ UINT8 TableSize;
+ DIMM_TYPE DimmType;
+ UINT8 PsoMaskOdtPat;
+ CPU_LOGICAL_ID LogicalCpuid;
+ UINT8 PackageType;
+ PSCFG_3D_ODTPAT_ENTRY *TblPtr;
+ CH_DEF_STRUCT *CurrentChannel;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+
+ TblPtr = NULL;
+ TableSize = 0;
+ PackageType = 0;
+ LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+ MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+ NOD = (UINT8) 1 << (MaxDimmPerCh - 1);
+
+ if (CurrentChannel->RegDimmPresent != 0) {
+ DimmType = RDIMM_TYPE;
+ } else if (CurrentChannel->SODimmPresent != 0) {
+ DimmType = SODIMM_TYPE;
+ } else if (CurrentChannel->LrDimmPresent != 0) {
+ DimmType = LRDIMM_TYPE;
+ } else {
+ DimmType = UDIMM_TYPE;
+ }
+
+ i = 0;
+ // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+ while (EntryOfTables->TblEntryOfODTPattern[i] != NULL) {
+ if (((EntryOfTables->TblEntryOfODTPattern[i])->Header.DimmType & DimmType) != 0) {
+ if (((EntryOfTables->TblEntryOfODTPattern[i])->Header.NumOfDimm & NOD) != 0) {
+ //
+ // Determine if this is the expected NB Type
+ //
+ LogicalCpuid = (EntryOfTables->TblEntryOfODTPattern[i])->Header.LogicalCpuid;
+ PackageType = (EntryOfTables->TblEntryOfODTPattern[i])->Header.PackageType;
+ if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+ TblPtr = (PSCFG_3D_ODTPAT_ENTRY *) ((EntryOfTables->TblEntryOfODTPattern[i])->TBLPtr);
+ TableSize = (EntryOfTables->TblEntryOfODTPattern[i])->TableSize;
+ break;
+ }
+ }
+ }
+ i++;
+ }
+
+ // Check whether no table entry is found.
+ if (EntryOfTables->TblEntryOfODTPattern[i] == NULL) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nNo ODT table\n");
+ return FALSE;
+ }
+
+ RankTypeOfPopulatedDimm = MemPGetPsRankType (CurrentChannel);
+
+ for (i = 0; i < TableSize; i++) {
+ MemPConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+ if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+ CurrentChannel->PhyRODTCSHigh = TblPtr->RdODTCSHigh;
+ CurrentChannel->PhyRODTCSLow = TblPtr->RdODTCSLow;
+ CurrentChannel->PhyWODTCSHigh = TblPtr->WrODTCSHigh;
+ CurrentChannel->PhyWODTCSLow = TblPtr->WrODTCSLow;
+
+ //WL ODT
+ if (MemNGetBitFieldNb (NBPtr, BFPerRankTimingEn) == 0) {
+ CurrentChannel->PhyWLODT[0] = (UINT8) (CurrentChannel->PhyWODTCSLow & 0x0F);
+ CurrentChannel->PhyWLODT[1] = (UINT8) ((CurrentChannel->PhyWODTCSLow >> 16) & 0x0F);
+ CurrentChannel->PhyWLODT[2] = (UINT8) (CurrentChannel->PhyWODTCSHigh & 0x0F);
+ CurrentChannel->PhyWLODT[3] = (UINT8) ((CurrentChannel->PhyWODTCSHigh >> 16) & 0x0F);
+ } else {
+ *(UINT32 *) &(CurrentChannel->PhyWLODT[0]) = CurrentChannel->PhyWODTCSLow & 0xF0F0F0F;
+ }
+
+ break;
+ }
+ TblPtr++;
+ }
+
+ //
+ // If there is no entry, check if overriding value existed. If not, return FALSE
+ //
+ PsoMaskOdtPat = (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_ODTPATTERN);
+ if ((PsoMaskOdtPat == 0) && (i == TableSize)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nNo ODT entries\n");
+ PutEventLog (AGESA_ERROR, MEM_ERROR_ODT_PATTERN_NOT_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+ if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ }
+ return FALSE;
+ }
+
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mprtt.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mprtt.c
new file mode 100644
index 0000000..aef8e98
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mprtt.c
@@ -0,0 +1,281 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mprtt.c
+ *
+ * A sub-engine which extracts RttNom and RttWr (Dram Term and Dynamic Dram Term) value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_MPRTT_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define _DONT_CARE 0xFF
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetRttNomWr (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * A sub-function which extracts RttNom and RttWr value from a input table and stores extracted
+ * value to a specific address.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *EntryOfTables - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ * @return TRUE - Table values can be extracted for all present dimms/ranks
+ * @return FALSE - Table values cannot be extracted for all present dimms/ranks
+ *
+ */
+BOOLEAN
+MemPGetRttNomWr (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ )
+{
+ UINT8 i;
+ UINT8 MaxDimmPerCh;
+ UINT8 MaxDimmSlotPerCh;
+ UINT8 NOD;
+ UINT8 TableSize;
+ UINT32 CurDDRrate;
+ UINT8 DDR3Voltage;
+ UINT16 RankTypeOfPopulatedDimm;
+ UINT16 RankTypeInTable;
+ DIMM_TYPE DimmType;
+ CPU_LOGICAL_ID LogicalCpuid;
+ UINT8 PackageType;
+ UINT8 TgtDimmType;
+ UINT8 TgtRank;
+ UINT8 Chipsel;
+ UINT8 PsoCsMaskRtt;
+ UINT16 PsoCsMaskRtt16;
+ UINT8 NoEntryCsMask;
+ PSCFG_RTT_ENTRY *TblPtr;
+ PSCFG_RTT_ENTRY *OrgTblPtr;
+ CH_DEF_STRUCT *CurrentChannel;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+
+ PsoCsMaskRtt = 0;
+ NoEntryCsMask = 0;
+ TblPtr = NULL;
+ TableSize = 0;
+ PackageType = 0;
+ LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+
+ MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+ MaxDimmSlotPerCh = MaxDimmPerCh - GetMaxSolderedDownDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+
+ if (CurrentChannel->RegDimmPresent != 0) {
+ DimmType = RDIMM_TYPE;
+ } else if (CurrentChannel->SODimmPresent != 0) {
+ DimmType = SODIMM_TYPE;
+ } else if (CurrentChannel->LrDimmPresent != 0) {
+ DimmType = LRDIMM_TYPE;
+ } else {
+ DimmType = UDIMM_TYPE;
+ }
+
+ // Check if it is "SODIMM plus soldered-down DRAM" or "Soldered-down DRAM only" configuration,
+ // DimmType is changed to 'SODWN_SODIMM_TYPE' if soldered-down DRAM exist
+ if (MaxDimmSlotPerCh != MaxDimmPerCh) {
+ // SODIMM plus soldered-down DRAM
+ DimmType = SODWN_SODIMM_TYPE;
+ } else if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_SOLDERED_DOWN_SODIMM_TYPE, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) != NULL) {
+ // Soldered-down DRAM only
+ DimmType = SODWN_SODIMM_TYPE;
+ MaxDimmSlotPerCh = 0;
+ }
+ NOD = (UINT8) (MaxDimmSlotPerCh != 0) ? (1 << (MaxDimmSlotPerCh - 1)) : _DIMM_NONE;
+
+ i = 0;
+ // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+ while (EntryOfTables->TblEntryOfDramTerm[i] != NULL) {
+ if (((EntryOfTables->TblEntryOfDramTerm[i])->Header.DimmType & DimmType) != 0) {
+ if (((EntryOfTables->TblEntryOfDramTerm[i])->Header.NumOfDimm & NOD) != 0) {
+ //
+ // Determine if this is the expected NB Type
+ //
+ LogicalCpuid = (EntryOfTables->TblEntryOfDramTerm[i])->Header.LogicalCpuid;
+ PackageType = (EntryOfTables->TblEntryOfDramTerm[i])->Header.PackageType;
+ if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+ TblPtr = (PSCFG_RTT_ENTRY *) ((EntryOfTables->TblEntryOfDramTerm[i])->TBLPtr);
+ TableSize = (EntryOfTables->TblEntryOfDramTerm[i])->TableSize;
+ break;
+ }
+ }
+ }
+ i++;
+ }
+
+ // Check whether no table entry is found.
+ if (EntryOfTables->TblEntryOfDramTerm[i] == NULL) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nNo RTT table\n");
+ return FALSE;
+ }
+
+ CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+ DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+ RankTypeOfPopulatedDimm = MemPGetPsRankType (CurrentChannel);
+
+ OrgTblPtr = TblPtr;
+ for (Chipsel = 0; Chipsel < MAX_CS_PER_CHANNEL; Chipsel++) {
+ TblPtr = OrgTblPtr;
+ if ((NBPtr->DCTPtr->Timings.CsPresent & (UINT16) (1 << Chipsel)) != 0) {
+ if ((CurrentChannel->DimmQrPresent & (UINT8) (1 << (Chipsel >> 1))) != 0) {
+ TgtDimmType = DIMM_QR;
+ TgtRank = (UINT8) ((Chipsel < 4) ? 1 << (Chipsel & 1) : 4 << (Chipsel & 1));
+ } else if ((CurrentChannel->DimmDrPresent & (UINT8) (1 << (Chipsel >> 1))) != 0) {
+ TgtDimmType = DIMM_DR;
+ TgtRank = (UINT8) 1 << (Chipsel & 1);
+ } else {
+ TgtDimmType = DIMM_SR;
+ TgtRank = (UINT8) 1 << (Chipsel & 1);
+ }
+
+ if (DimmType == LRDIMM_TYPE) {
+ TgtDimmType = _DONT_CARE;
+ TgtRank = _DONT_CARE;
+ }
+
+ for (i = 0; i < TableSize; i++) {
+ MemPConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+ if ((TblPtr->DimmPerCh & NOD) != 0) {
+ if ((TblPtr->DDRrate & CurDDRrate) != 0) {
+ if ((TblPtr->VDDIO & DDR3Voltage) != 0) {
+ if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+ if (((TblPtr->Dimm & TgtDimmType) != 0) || (TgtDimmType == _DONT_CARE)) {
+ if (((TblPtr->Rank & TgtRank) != 0) || (TgtRank == _DONT_CARE)) {
+ NBPtr->PsPtr->RttNom[Chipsel] = (UINT8) TblPtr->RttNom;
+ NBPtr->PsPtr->RttWr[Chipsel] = (UINT8) TblPtr->RttWr;
+ break;
+ }
+ }
+ }
+ }
+ }
+ }
+ TblPtr++;
+ }
+ // Record which Cs(s) have no entries. Later on, we will check if there are overriding values for them.
+ if ((i == TableSize) && (NBPtr->SharedPtr->VoltageMap == VDDIO_DETERMINED)) {
+ NoEntryCsMask |= (UINT8) 1 << Chipsel;
+ }
+ }
+ }
+
+ PsoCsMaskRtt16 = MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_ODT_RTTNOM);
+ PsoCsMaskRtt16 &= MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_ODT_RTTWR);
+ //
+ // Check to see if invalid entry exist ?
+ //
+ if ((PsoCsMaskRtt16 & INVALID_CONFIG_FLAG) != 0) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nInvalid entry is found\n\n");
+ return FALSE;
+ }
+
+ //
+ // If there are no entries for certain Cs(s), we need to check if overriding values (both RttNom and RttWr) existed for them.
+ // Otherwise, return FALSE.
+ //
+ PsoCsMaskRtt = (UINT8) PsoCsMaskRtt16;
+ if (NoEntryCsMask != 0) {
+ if ((PsoCsMaskRtt & NoEntryCsMask) != NoEntryCsMask) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nNo Rtt entries\n");
+ PutEventLog (AGESA_ERROR, MEM_ERROR_RTT_NOT_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+ if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ }
+ return FALSE;
+ }
+ }
+
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mps2d.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mps2d.c
new file mode 100644
index 0000000..328ab6a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mps2d.c
@@ -0,0 +1,233 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mps2d.c
+ *
+ * A sub-engine determine which configs should use 2D training.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_MPS2D_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetS2D (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ );
+
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * A sub-function which determine if 2D should be run
+ * from a input table
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *EntryOfTables - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ * @return TRUE - Table values can be extracted per dimm population and ranks type.
+ * @return FALSE - Table values cannot be extracted per dimm population and ranks type.
+ *
+ */
+BOOLEAN
+MemPGetS2D (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ )
+{
+
+ UINT8 i;
+ UINT8 MaxDimmPerCh;
+ UINT8 MaxDimmSlotPerCh;
+ UINT8 NOD;
+ UINT8 TableSize;
+ UINT32 CurDDRrate;
+ UINT8 DDR3Voltage;
+ UINT16 RankTypeOfPopulatedDimm;
+ UINT16 RankTypeInTable;
+ BOOLEAN FoundValue;
+ DIMM_TYPE DimmType;
+ CPU_LOGICAL_ID LogicalCpuid;
+ UINT8 PackageType;
+ PSCFG_S2D_ENTRY *TblPtr;
+ CH_DEF_STRUCT *CurrentChannel;
+ UINT16 P2dTraingOveride;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+
+ TblPtr = NULL;
+ TableSize = 0;
+ PackageType = 0;
+ LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+
+ MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+ MaxDimmSlotPerCh = MaxDimmPerCh - GetMaxSolderedDownDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+
+ if (CurrentChannel->RegDimmPresent != 0) {
+ DimmType = RDIMM_TYPE;
+ } else if (CurrentChannel->SODimmPresent != 0) {
+ DimmType = SODIMM_TYPE;
+ } else if (CurrentChannel->LrDimmPresent != 0) {
+ DimmType = LRDIMM_TYPE;
+ } else {
+ DimmType = UDIMM_TYPE;
+ }
+
+ // Check if it is "SODIMM plus soldered-down DRAM" or "Soldered-down DRAM only" configuration,
+ // DimmType is changed to 'SODWN_SODIMM_TYPE' if soldered-down DRAM exist
+ if (MaxDimmSlotPerCh != MaxDimmPerCh) {
+ // SODIMM plus soldered-down DRAM
+ DimmType = SODWN_SODIMM_TYPE;
+ } else if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_SOLDERED_DOWN_SODIMM_TYPE, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) != NULL) {
+ // Soldered-down DRAM only
+ DimmType = SODWN_SODIMM_TYPE;
+ MaxDimmSlotPerCh = 0;
+ }
+ NOD = (UINT8) (MaxDimmSlotPerCh != 0) ? (1 << (MaxDimmSlotPerCh - 1)) : _DIMM_NONE;
+
+ i = 0;
+ // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+ while (EntryOfTables->TblEntryOfS2D[i] != NULL) {
+ if (((EntryOfTables->TblEntryOfS2D[i])->Header.DimmType & DimmType) != 0) {
+ if (((EntryOfTables->TblEntryOfS2D[i])->Header.NumOfDimm & NOD) != 0) {
+ //
+ // Determine if this is the expected NB Type
+ //
+ LogicalCpuid = (EntryOfTables->TblEntryOfS2D[i])->Header.LogicalCpuid;
+ PackageType = (EntryOfTables->TblEntryOfS2D[i])->Header.PackageType;
+ if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+ TblPtr = (PSCFG_S2D_ENTRY *) ((EntryOfTables->TblEntryOfS2D[i])->TBLPtr);
+ TableSize = (EntryOfTables->TblEntryOfS2D[i])->TableSize;
+ break;
+ }
+ }
+ }
+ i++;
+ }
+
+ // Check whether no table entry is found.
+ if (EntryOfTables->TblEntryOfS2D[i] == NULL) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nNo 2D training Config table\n");
+ return FALSE;
+ }
+ CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+ DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+ RankTypeOfPopulatedDimm = MemPGetPsRankType (CurrentChannel);
+ FoundValue = FALSE;
+ for (i = 0; i < TableSize; i++) {
+ MemPConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+ if ((TblPtr->DimmPerCh & NOD) != 0) {
+ if ((TblPtr->DDRrate & CurDDRrate) != 0) {
+ if ((TblPtr->VDDIO & DDR3Voltage) != 0) {
+ if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+ if (TblPtr->Enable2D == 1) {
+ FoundValue = TRUE;
+ break;
+ }
+ }
+ }
+ }
+ }
+ TblPtr++;
+ }
+ P2dTraingOveride = MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_2D_TRAINING);
+ if (P2dTraingOveride != 0) {
+ if (NBPtr->Override2DTraining) {
+ FoundValue = TRUE;
+ } else {
+ FoundValue = FALSE;
+ }
+ }
+ //
+ // If there is no entry, check if overriding 2D training existed. If not, show no entry found.
+ //
+ if (FoundValue == FALSE || ((P2dTraingOveride & INVALID_CONFIG_FLAG) != 0)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nNo 2D training config entries\n");
+ return FALSE;
+ } else {
+ return TRUE;
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mpsao.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mpsao.c
new file mode 100644
index 0000000..aa9c1cb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Ps/mpsao.c
@@ -0,0 +1,239 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mpsao.c
+ *
+ * A sub-engine which extracts Slow access mode, Address timing and Output driver compensation value.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Ps)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "cpuFamRegisters.h"
+#include "cpuRegisters.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "mu.h"
+#include "ma.h"
+#include "mp.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G2_PEI)
+RDATA_GROUP (G2_PEI)
+
+#define FILECODE PROC_MEM_PS_MPSAO_FILECODE
+
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemPGetSAO (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * A sub-function which extracts Slow mode, Address timing and Output driver compensation value
+ * from a input table and store those value to a specific address.
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in] *EntryOfTables - Pointer to MEM_PSC_TABLE_BLOCK
+ *
+ * @return TRUE - Table values can be extracted per dimm population and ranks type.
+ * @return FALSE - Table values cannot be extracted per dimm population and ranks type.
+ *
+ */
+BOOLEAN
+MemPGetSAO (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSC_TABLE_BLOCK *EntryOfTables
+ )
+{
+
+ UINT8 i;
+ UINT8 MaxDimmPerCh;
+ UINT8 MaxDimmSlotPerCh;
+ UINT8 NOD;
+ UINT8 TableSize;
+ UINT32 CurDDRrate;
+ UINT8 DDR3Voltage;
+ UINT16 RankTypeOfPopulatedDimm;
+ UINT16 RankTypeInTable;
+ UINT8 PsoMaskSAO;
+ DIMM_TYPE DimmType;
+ CPU_LOGICAL_ID LogicalCpuid;
+ UINT8 PackageType;
+ PSCFG_SAO_ENTRY *TblPtr;
+ CH_DEF_STRUCT *CurrentChannel;
+
+ CurrentChannel = NBPtr->ChannelPtr;
+
+ TblPtr = NULL;
+ TableSize = 0;
+ PackageType = 0;
+ LogicalCpuid.Family = AMD_FAMILY_UNKNOWN;
+
+ MaxDimmPerCh = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+ MaxDimmSlotPerCh = MaxDimmPerCh - GetMaxSolderedDownDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ NBPtr->MCTPtr->SocketId, CurrentChannel->ChannelID);
+
+ if (CurrentChannel->RegDimmPresent != 0) {
+ DimmType = RDIMM_TYPE;
+ } else if (CurrentChannel->SODimmPresent != 0) {
+ DimmType = SODIMM_TYPE;
+ } else if (CurrentChannel->LrDimmPresent != 0) {
+ DimmType = LRDIMM_TYPE;
+ } else {
+ DimmType = UDIMM_TYPE;
+ }
+
+ // Check if it is "SODIMM plus soldered-down DRAM" or "Soldered-down DRAM only" configuration,
+ // DimmType is changed to 'SODWN_SODIMM_TYPE' if soldered-down DRAM exist
+ if (MaxDimmSlotPerCh != MaxDimmPerCh) {
+ // SODIMM plus soldered-down DRAM
+ DimmType = SODWN_SODIMM_TYPE;
+ } else if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_SOLDERED_DOWN_SODIMM_TYPE, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) != NULL) {
+ // Soldered-down DRAM only
+ DimmType = SODWN_SODIMM_TYPE;
+ MaxDimmSlotPerCh = 0;
+ }
+ NOD = (UINT8) (MaxDimmSlotPerCh != 0) ? (1 << (MaxDimmSlotPerCh - 1)) : _DIMM_NONE;
+
+ i = 0;
+ // Obtain table pointer, table size, Logical Cpuid and PSC type according to Dimm, NB and package type.
+ while (EntryOfTables->TblEntryOfSAO[i] != NULL) {
+ if (((EntryOfTables->TblEntryOfSAO[i])->Header.DimmType & DimmType) != 0) {
+ if (((EntryOfTables->TblEntryOfSAO[i])->Header.NumOfDimm & NOD) != 0) {
+ //
+ // Determine if this is the expected NB Type
+ //
+ LogicalCpuid = (EntryOfTables->TblEntryOfSAO[i])->Header.LogicalCpuid;
+ PackageType = (EntryOfTables->TblEntryOfSAO[i])->Header.PackageType;
+ if (MemPIsIdSupported (NBPtr, LogicalCpuid, PackageType)) {
+ TblPtr = (PSCFG_SAO_ENTRY *) ((EntryOfTables->TblEntryOfSAO[i])->TBLPtr);
+ TableSize = (EntryOfTables->TblEntryOfSAO[i])->TableSize;
+ break;
+ }
+ }
+ }
+ i++;
+ }
+
+ // Check whether no table entry is found.
+ if (EntryOfTables->TblEntryOfSAO[i] == NULL) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nNo SlowAccMode, AddrTmg and ODCCtrl table\n");
+ return FALSE;
+ }
+
+ CurDDRrate = (UINT32) (1 << (CurrentChannel->DCTPtr->Timings.Speed / 66));
+ DDR3Voltage = (UINT8) (1 << CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage));
+ RankTypeOfPopulatedDimm = MemPGetPsRankType (CurrentChannel);
+
+ for (i = 0; i < TableSize; i++) {
+ MemPConstructRankTypeMap ((UINT16) TblPtr->Dimm0, (UINT16) TblPtr->Dimm1, (UINT16) TblPtr->Dimm2, &RankTypeInTable);
+ if ((TblPtr->DimmPerCh & NOD) != 0) {
+ if ((TblPtr->DDRrate & CurDDRrate) != 0) {
+ if ((TblPtr->VDDIO & DDR3Voltage) != 0) {
+ if ((RankTypeInTable & RankTypeOfPopulatedDimm) == RankTypeOfPopulatedDimm) {
+ CurrentChannel->DctAddrTmg = TblPtr->AddTmgCtl;
+ CurrentChannel->DctOdcCtl = TblPtr->ODC;
+ CurrentChannel->SlowMode = (TblPtr->SlowMode == 1) ? TRUE : FALSE;
+ NBPtr->PsPtr->ProcessorOnDieTerminationOff = (TblPtr->POdtOff == 1) ? TRUE : FALSE;
+ break;
+ }
+ }
+ }
+ }
+ TblPtr++;
+ }
+
+ //
+ // If there is no entry, check if overriding values (SlowAccMode, AddrTmg and ODCCtrl) existed. If not, show no entry found.
+ //
+ PsoMaskSAO = (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_SLOWACCMODE);
+ PsoMaskSAO &= (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_ODCCTRL);
+ PsoMaskSAO &= (UINT8) MemPProceedTblDrvOverride (NBPtr, NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_TBLDRV_ADDRTMG);
+ if ((PsoMaskSAO == 0) && (i == TableSize)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nNo SlowAccMode, AddrTmg and ODCCtrl entries\n");
+ } else {
+ return TRUE;
+ }
+
+ if (NBPtr->SharedPtr->VoltageMap != VDDIO_DETERMINED) {
+ return TRUE;
+ }
+
+ PutEventLog (AGESA_ERROR, MEM_ERROR_SAO_NOT_FOUND, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+ if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ }
+ return FALSE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mt3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mt3.c
new file mode 100644
index 0000000..113386e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mt3.c
@@ -0,0 +1,235 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mt3.c
+ *
+ * Common Technology functions for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mtspd3.h"
+#include "mtot3.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+/* features */
+#define FILECODE PROC_MEM_TECH_DDR3_MT3_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function Constructs the technology block
+ *
+ * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+BOOLEAN
+MemConstructTechBlock3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT MEM_NB_BLOCK *NBPtr
+ )
+{
+ TECHNOLOGY_TYPE *TechTypePtr;
+ UINT8 Dct;
+ UINT8 Channel;
+ UINT8 i;
+ DIE_STRUCT *MCTPtr;
+ DCT_STRUCT *DCTPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+ UINT8 DimmSlots;
+
+
+ TechTypePtr = (TECHNOLOGY_TYPE *) FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MEM_TECH, NBPtr->MCTPtr->SocketId, 0, 0, NULL, NULL);
+ if (TechTypePtr != NULL) {
+ // Ensure the platform override value is valid
+ ASSERT ((*TechTypePtr == DDR3_TECHNOLOGY) || (*TechTypePtr == DDR2_TECHNOLOGY));
+ if (*TechTypePtr != DDR3_TECHNOLOGY) {
+ return FALSE;
+ }
+ }
+
+ TechPtr->NBPtr = NBPtr;
+ TechPtr->RefPtr = NBPtr->RefPtr;
+ MCTPtr = NBPtr->MCTPtr;
+
+ TechPtr->SendAllMRCmds = MemTSendAllMRCmds3;
+ TechPtr->FreqChgCtrlWrd = FreqChgCtrlWrd3;
+ TechPtr->SetDramMode = MemTSetDramMode3;
+ TechPtr->DimmPresence = MemTDIMMPresence3;
+ TechPtr->SpdCalcWidth = MemTSPDCalcWidth3;
+ TechPtr->SpdGetTargetSpeed = MemTSPDGetTargetSpeed3;
+ TechPtr->AutoCycTiming = MemTAutoCycTiming3;
+ TechPtr->SpdSetBanks = MemTSPDSetBanks3;
+ TechPtr->SetDqsEccTmgs = MemTSetDQSEccTmgs;
+ TechPtr->GetCSIntLvAddr = MemTGetCSIntLvAddr3;
+ TechPtr->AdjustTwrwr = MemTAdjustTwrwr3;
+ TechPtr->AdjustTwrrd = MemTAdjustTwrrd3;
+ TechPtr->GetDimmSpdBuffer = MemTGetDimmSpdBuffer3;
+ TechPtr->GetLD = MemTGetLD3;
+ TechPtr->MaxFilterDly = 0;
+
+ //
+ // Map the Logical Dimms on this channel to the SPD that should be used for that logical DIMM.
+ // The pointers to the DIMM SPD information is as follows (2 Dimm/Ch and 3 Dimm/Ch examples).
+ //
+ // DIMM Spd Buffer Current Channel DimmSpdPtr[MAX_DIMMS_PER_CHANNEL] array
+ // (Number of dimms varies by platform) (Array size is determined in AGESA.H) Dimm operations loop
+ // on this array only)
+ // 2 DIMMS PER CHANNEL
+ //
+ // Socket N Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+ // Dimm 1 SR/DR DIMM <--------------DimmSpdPtr[1]
+ // DimmSpdPtr[2]------->NULL
+ // DimmSpdPtr[3]------->NULL
+ //
+ // Socket N Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+ // Dimm 1 QR DIMM <---------+----DimmSpdPtr[1]
+ // | DimmSpdPtr[2]------->NULL
+ // +----DimmSpdPtr[3]
+ //
+ // Socket N Channel N Dimm 0 QR DIMM <-----+--------DimmSpdPtr[0]
+ // Dimm 1 QR DIMM <-----|---+----DimmSpdPtr[1]
+ // +-- | ---DimmSpdPtr[2]
+ // +----DimmSpdPtr[3]
+ //
+ // 3 DIMMS PER CHANNEL
+ //
+ // Socket N Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+ // Dimm 1 SR/DR DIMM <--------------DimmSpdPtr[1]
+ // Dimm 3 SR/DR DIMM <--------------DimmSpdPtr[2]
+ // DimmSpdPtr[3]------->NULL
+ //
+ // Socket N Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+ // Dimm 1 QR DIMM <---------+----DimmSpdPtr[1]
+ // Dimm 3 SR/DR DIMM <-------- | ---DimmSpdPtr[2]
+ // +----DimmSpdPtr[3]
+ //
+ //
+ // FOR LRDIMMS
+ //
+ // This code will assign SPD pointers on the basis of Physical ranks, even though
+ // an LRDIMM may only use one or two logical ranks, that determination will have to
+ // be made from downstream code. An LRDIMM with greater than 2 Physical ranks will have
+ // its DimmSpdPtr[] mapped as if it were a QR in the above diagrams.
+
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ DCTPtr = NBPtr->DCTPtr;
+ for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+ NBPtr->SwitchChannel (NBPtr, Channel);
+ ChannelPtr = NBPtr->ChannelPtr;
+ ChannelPtr->TechType = DDR3_TECHNOLOGY;
+ ChannelPtr->MCTPtr = MCTPtr;
+ ChannelPtr->DCTPtr = DCTPtr;
+
+ DimmSlots = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ MCTPtr->SocketId,
+ NBPtr->GetSocketRelativeChannel (NBPtr, Dct, Channel)
+ );
+ //
+ // Initialize the SPD pointers for each Dimm
+ //
+ for (i = 0 ; i < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0])) ; i++) {
+ ChannelPtr->DimmSpdPtr[i] = NULL;
+ }
+ for (i = 0 ; i < DimmSlots; i++) {
+ ChannelPtr->DimmSpdPtr[i] = &(ChannelPtr->SpdPtr[i]);
+ if ( (i + 2) < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0]))) {
+ if (ChannelPtr->DimmSpdPtr[i]->DimmPresent) {
+ if ((((ChannelPtr->DimmSpdPtr[i]->Data[SPD_RANKS] >> 3) & 0x07) + 1) > 2) {
+ ChannelPtr->DimmSpdPtr[i + 2] = &(ChannelPtr->SpdPtr[i]);
+ }
+ }
+ }
+ }
+ }
+ }
+ // Initialize Common technology functions
+ MemTCommonTechInit (TechPtr);
+
+ return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mt3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mt3.h
new file mode 100644
index 0000000..d737449
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mt3.h
@@ -0,0 +1,134 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mt3.h
+ *
+ * Common Technology
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MT3_H_
+#define _MT3_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemConstructTechBlock3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+BOOLEAN
+MemTSetDramMode3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTDIMMPresence3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTSPDCalcWidth3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTSPDGetTargetSpeed3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTAutoCycTiming3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTSPDSetBanks3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemTGetCSIntLvAddr3 (
+ IN UINT8 BankEnc,
+ OUT UINT8 *LowBit,
+ OUT UINT8 *HiBit
+ );
+
+VOID
+MemTSendAllMRCmds3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 ChipSel
+ );
+
+VOID
+FreqChgCtrlWrd3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+
+BOOLEAN
+MemTGetDimmSpdBuffer3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT UINT8 **SpdBuffer,
+ IN UINT8 Dimm
+ );
+#endif /* _MT3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtlrdimm3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtlrdimm3.h
new file mode 100644
index 0000000..1ace78b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtlrdimm3.h
@@ -0,0 +1,132 @@
+/**
+ * @file
+ *
+ * mtlrdimm3.h
+ *
+ * Definitions and declarations for DDR3 LRDIMM support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MTLRDIMM3_H_
+#define _MTLRDIMM3_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define RCW_FN_SELECT 7
+
+#define F0 0
+#define F1 1
+#define F2 2
+#define F3 3
+#define F4 4
+#define F5 5
+#define F6 6
+#define F7 7
+#define F8 8
+#define F9 9
+#define F10 10
+#define F11 11
+#define F12 12
+#define F13 13
+#define F14 14
+#define F15 15
+
+#define RC0 0
+#define RC1 1
+#define RC2 2
+#define RC3 3
+#define RC4 4
+#define RC5 5
+#define RC6 6
+#define RC7 7
+#define RC8 8
+#define RC9 9
+#define RC10 10
+#define RC11 11
+#define RC12 12
+#define RC13 13
+#define RC14 14
+#define RC15 15
+
+#define SPD_NONE 0
+#define SPD_67 67
+#define SPD_68 68
+#define SPD_69 69
+#define SPD_70 70
+#define SPD_71 71
+
+#define SPD_MDQ_800_1066 72
+#define SPD_QXODT_800_1066 73
+#define SPD_MR1_MR2_800_1066 77
+#define SPD_PERSONALITY_BYTE 102
+#define SPD_FREQ_DIFF_OFFSET 6
+
+#define SPECIAL_CASE 0xFF
+#define WAIT_6US 0xF6
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// LRDIMM SPECIALIZED HOOK ENTRY POINTS
+typedef enum {
+ AFTER_TSTAB, ///< Time point after tStab
+ AFTER_RCW, ///< Time point after LrDimm Rcw commands are sent
+ BEFORE_BUFFERTRN, ///< Time point just before Buffer training
+ AFTER_BUFFERTRN, ///< Time point just after Buffer training
+ BEFORE_HOST_WL, ///< Time point before host WL
+ AFTER_HOST_WL ///< Time point after host WL
+} LRDIMM_HOOK_ENTRYPOINT;
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif /* _MTLRDIMM3_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtot3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtot3.c
new file mode 100644
index 0000000..41834f1
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtot3.c
@@ -0,0 +1,167 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtot3.c
+ *
+ * Technology Non-SPD Timings for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mtot3.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTOT3_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function adjusts the Twrwr value for DDR3.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTAdjustTwrwr3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ DCT_STRUCT *DCTPtr;
+
+ DCTPtr = TechPtr->NBPtr->DCTPtr;
+
+ // For DDR3, value 0000b-0001b and >= 1011b of Twrwr is reserved.
+ if (DCTPtr->Timings.Twrwr < 2) {
+ DCTPtr->Timings.Twrwr = 2;
+ } else if (DCTPtr->Timings.Twrwr > 10) {
+ DCTPtr->Timings.Twrwr = 10;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function adjusts the Twrrd value for DDR3.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTAdjustTwrrd3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ DCT_STRUCT *DCTPtr;
+
+ DCTPtr = TechPtr->NBPtr->DCTPtr;
+
+ // For DDR3, value 0000b, 0001b, and > 1010b of Twrrd is reserved.
+ if (DCTPtr->Timings.Twrrd < 2) {
+ DCTPtr->Timings.Twrrd = 2;
+ } else if (DCTPtr->Timings.Twrrd > 10) {
+ DCTPtr->Timings.Twrrd = 10;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets the LD value for DDR3.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return Value of LD
+ */
+
+INT8
+MemTGetLD3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ INT8 LD;
+ MEM_NB_BLOCK *NBPtr;
+ NBPtr = TechPtr->NBPtr;
+ //
+ // For DDR3, BIOS calculates the latency difference (Ld) as equal to read CAS latency minus write CAS
+ // latency, in MEMCLKs (see F2x[1, 0]88[Tcl] and F2x[1, 0]84[Tcwl]) which can be a negative or positive
+ // value.
+ //
+ LD = ((INT8) NBPtr->GetBitField (NBPtr, BFTcl) + 4) - ((INT8) NBPtr->GetBitField (NBPtr, BFTcwl) + 5);
+
+ return LD;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtot3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtot3.h
new file mode 100644
index 0000000..05f0c41a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtot3.h
@@ -0,0 +1,90 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtot3.h
+ *
+ * Technology Non-SPD timings for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MTOT3_H_
+#define _MTOT3_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+VOID
+MemTAdjustTwrwr3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemTAdjustTwrrd3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+INT8
+MemTGetLD3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+#endif /* _MTOT3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtrci3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtrci3.c
new file mode 100644
index 0000000..bc7a5a0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtrci3.c
@@ -0,0 +1,318 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtrci3.c
+ *
+ * Technology Control word initialization for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mtrci3.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTRCI3_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sends control words
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTDramControlRegInit3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 ChipSel;
+ UINT8 i;
+ UINT8 RawCard;
+ UINT8 Data;
+ UINT16 CsPresent;
+
+ MEM_DATA_STRUCT *MemPtr;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+ CsPresent = NBPtr->DCTPtr->Timings.CsPresent;
+
+ MemUWait10ns (800, MemPtr); // wait 8us TACT must be changed to optimize to 8 MEM CLKs
+
+ // Set EnDramInit to start DRAM initialization
+
+ MemUWait10ns (600, MemPtr); // wait 6us for PLL LOCK
+
+ for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+ //
+ // If chip select present
+ //
+ if ((CsPresent & ((UINT16)3 << ChipSel)) != 0) {
+ NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+
+ // 2. Program F2x[1, 0]A8[CtrlWordCS]=bit mask for target chip selects.
+ NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (ChipSel & 0xFE));
+
+ RawCard = NBPtr->ChannelPtr->RefRawCard[ChipSel >> 1];
+
+ for (i = 0; i <= 15; i++) {
+ // wait 8us for TMRD, must be changed to optimize to 8 MEM CLKs
+ MemUWait10ns (800, MemPtr);
+ if ((i != 6) && (i != 7)) {
+ Data = MemTGetCtlWord3 (TechPtr, i, RawCard, ChipSel);
+ MemTSendCtlWord3 (TechPtr, i, Data);
+ }
+ }
+ }
+ }
+ MemUWait10ns (600, MemPtr); // wait 6us for TSTAB
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function calculates the ControlRC value
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] CtrlWordNum - control Word number.
+ * @param[in] RawCard - Raw Card
+ * @param[in] ChipSel - Target Chip Select
+ * @return Control Word value
+ */
+
+UINT8
+MemTGetCtlWord3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 CtrlWordNum,
+ IN UINT8 RawCard,
+ IN UINT8 ChipSel
+ )
+{
+ UINT8 Data;
+ UINT8 PowerDownMode;
+ DCT_STRUCT *DCTPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ DCTPtr = TechPtr->NBPtr->DCTPtr;
+ ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+ Data = 0; //Default value for all control words is 0
+ switch (CtrlWordNum) {
+ case 0:
+ Data = 0x02; // DA4=1
+ break;
+ case 1:
+ if (DCTPtr->Timings.DimmSRPresent & ((UINT16) 1 << (ChipSel >> 1))) {
+ Data = 0x0C; // if single rank, set DBA1 and DBA0
+ }
+ break;
+ case 2:
+ Data = ChannelPtr->CtrlWrd02[ChipSel >> 1];
+ break;
+ case 3:
+ Data = ChannelPtr->CtrlWrd03[ChipSel >> 1];
+ break;
+ case 4:
+ Data = ChannelPtr->CtrlWrd04[ChipSel >> 1];
+ break;
+ case 5:
+ Data = ChannelPtr->CtrlWrd05[ChipSel >> 1];
+ break;
+ case 8:
+ Data = ChannelPtr->CtrlWrd08[ChipSel >> 1];
+ break;
+ case 9:
+ // RC9 = 0xD except when partial powerdown mode is enabled and mix SR/DR or SR/QR configurations,
+ // RC9 should be 0x9 for SR and and 0xD for DR or QR RDIMMs.
+ PowerDownMode = (UINT8) UserOptions.CfgPowerDownMode;
+ PowerDownMode = (!TechPtr->NBPtr->IsSupported[ChannelPDMode]) ? PowerDownMode : 0;
+ IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(TechPtr->NBPtr->MemPtr->StdHeader));
+ if ((PowerDownMode == 1) &&
+ (DCTPtr->Timings.DimmSRPresent & ((UINT16) 1 << (ChipSel >> 1))) &&
+ ((DCTPtr->Timings.DimmDrPresent != 0) || (DCTPtr->Timings.DimmQrPresent != 0))) {
+ Data = 0x09;
+ } else {
+ Data = 0x0D;
+ }
+ break;
+ case 11:
+ Data = CONVERT_VDDIO_TO_ENCODED (TechPtr->RefPtr->DDR3Voltage);
+ break;
+ default:;
+ }
+
+ return (Data & 0x0F);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sends control word command
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] CmdNum - control number.
+ * @param[in] Value - value to send
+ *
+ */
+
+VOID
+MemTSendCtlWord3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 CmdNum,
+ IN UINT8 Value
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+
+ // 1. Program MrsBank and MrsAddress.
+ // n = [BA2, A2, A1, A0].
+ // data = [BA1, BA0, A4, A3].
+ // Set all other bits in MrsAddress to zero.
+ //
+ NBPtr->SetBitField (NBPtr, BFMrsBank, ((CmdNum & 8) >> 1) | (Value >> 2));
+ NBPtr->SetBitField (NBPtr, BFMrsAddress, ((Value & 3) << 3) | (CmdNum & 7));
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS%d RC%02d %04x\n", (MemNGetBitFieldNb (NBPtr, BFMrsChipSel) & 7), CmdNum, Value);
+
+ // 2.Set SendCtrlWord=1
+ NBPtr->SetBitField (NBPtr, BFSendCtrlWord, 1);
+ // 3.Wait for BFSendCtrlWord=0
+ NBPtr->PollBitField (NBPtr, BFSendCtrlWord, 0, PCI_ACCESS_TIMEOUT, FALSE);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sends specific control words commands before frequency change for certain DRAM buffers.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+FreqChgCtrlWrd3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 ChipSel;
+ UINT16 Speed;
+ UINT16 CsPresent;
+
+ MEM_DATA_STRUCT *MemPtr;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+ Speed = NBPtr->DCTPtr->Timings.Speed;
+ CsPresent = NBPtr->DCTPtr->Timings.CsPresent;
+
+
+ for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+ //
+ // If chip select present.
+ //
+ if ((CsPresent & ((UINT16)3 << ChipSel)) != 0) {
+
+ NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+ // program F2x[1, 0]A8[CtrlWordCS]=bit mask for target chip selects.
+ NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (ChipSel & 0xFE));
+
+ //wait 8us for TMRD, must be changed to optimize to 8 MEM CLKs
+ MemUWait10ns (800, MemPtr);
+ if (Speed == DDR800_FREQUENCY) {
+ MemTSendCtlWord3 (TechPtr, 0x0A, 0);
+ } else if (Speed == DDR1066_FREQUENCY) {
+ MemTSendCtlWord3 (TechPtr, 0x0A, 1);
+ } else if (Speed == DDR1333_FREQUENCY) {
+ MemTSendCtlWord3 (TechPtr, 0x0A, 2);
+ } else if (Speed == DDR1600_FREQUENCY) {
+ MemTSendCtlWord3 (TechPtr, 0x0A, 3);
+ } else if (Speed == DDR1866_FREQUENCY) {
+ MemTSendCtlWord3 (TechPtr, 0x0A, 4);
+ } else {
+ ASSERT (FALSE);
+ }
+ }
+ }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtrci3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtrci3.h
new file mode 100644
index 0000000..7b2db43
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtrci3.h
@@ -0,0 +1,87 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtrci3.h
+ *
+ * Technology control word init for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MTRCI3_H_
+#define _MTRCI3_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+UINT8
+MemTGetCtlWord3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 CtrlWordNum,
+ IN UINT8 RawCard,
+ IN UINT8 ChipSel
+ );
+
+VOID
+MemTDramControlRegInit3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+#endif /* _MTRCI3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtsdi3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtsdi3.c
new file mode 100644
index 0000000..a023705
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtsdi3.c
@@ -0,0 +1,503 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtsdi3.c
+ *
+ * Technology Software DRAM Init for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mtsdi3.h"
+#include "mtrci3.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+#define FILECODE PROC_MEM_TECH_DDR3_MTSDI3_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initiates software DRAM init for both DCTs
+ * at the same time.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+BOOLEAN
+MemTDramInitSw3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 Dct;
+ UINT8 ChipSel;
+
+ MEM_DATA_STRUCT *MemPtr;
+ DIE_STRUCT *MCTPtr;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+ MCTPtr = NBPtr->MCTPtr;
+
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Dram Init\n");
+ // 3.Program F2x[1,0]7C[EnDramInit]=1
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tEnDramInit = 1 for both DCTs\n");
+ NBPtr->BrdcstSet (NBPtr, BFEnDramInit, 1);
+ NBPtr->PollBitField (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, TRUE);
+
+ // 4.wait 200us
+ MemUWait10ns (20000, MemPtr);
+
+ // 5.Program F2x[1, 0]7C[DeassertMemRstX] = 1.
+ NBPtr->BrdcstSet (NBPtr, BFDeassertMemRstX, 1);
+
+ // 6.wait 500us
+ MemUWait10ns (50000, MemPtr);
+
+ // Do Phy Fence training before sending MRS commands
+ if (!NBPtr->IsSupported[FenceTrnBeforeDramInit]) {
+ AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader));
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ NBPtr->PhyFenceTraining (NBPtr);
+ }
+ }
+ }
+
+ // 7.NOP or deselect & take CKE high
+ NBPtr->BrdcstSet (NBPtr, BFAssertCke, 1);
+
+ // 8.wait 360ns
+ MemUWait10ns (36, MemPtr);
+
+ // The following steps are performed once for each channel with unbuffered DIMMs
+ // and once for each chip select on registered DIMMs:
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+
+ // Enable Dram Parity if appropriate.
+ NBPtr->FamilySpecificHook[EnableParityAfterMemRst] (NBPtr, NULL);
+
+ // The following steps are performed with registered DIMMs only and
+ // must be done for each chip select pair:
+ if (MCTPtr->Status[SbRegistered]) {
+ MemTDramControlRegInit3 (TechPtr);
+ }
+
+ // Initialize LRDIMM's register
+ TechPtr->TechnologySpecificHook[LrdimmControlRegInit] (TechPtr, NULL);
+
+ for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+ if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+ // if chip select present
+ if (!(TechPtr->TechnologySpecificHook[LrdimmSendAllMRCmds] (TechPtr, &ChipSel))) {
+ MemTSendAllMRCmds3 (TechPtr, ChipSel);
+ }
+ // NOTE: wait 512 clocks for DLL-relock
+ MemUWait10ns (50000, NBPtr->MemPtr); // wait 500us
+ if (!(MCTPtr->Status[SbRegistered] || MCTPtr->Status[SbLrdimms])) {
+ break;
+ }
+ }
+ }
+
+ // 17.Send two ZQCL commands (to even then odd chip select)
+ NBPtr->sendZQCmd (NBPtr);
+ NBPtr->sendZQCmd (NBPtr);
+ }
+ }
+
+ // 18.Program F2x[1,0]7C[EnDramInit]=0
+ NBPtr->BrdcstSet (NBPtr, BFEnDramInit, 0);
+ NBPtr->PollBitField (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, TRUE);
+ //
+ // For Unbuffered Dimms, Issue MRS for remaining CS without EnDramInit
+ //
+ NBPtr->FamilySpecificHook[SendMrsCmdsPerCs] (NBPtr, NBPtr);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "End Dram Init\n\n");
+ return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function calculates the EMRS1 value
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Wl - Indicates if WL mode should be enabled
+ * @param[in] TargetDIMM - DIMM target for WL
+ */
+
+VOID
+MemTEMRS13 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN BOOLEAN Wl,
+ IN UINT8 TargetDIMM
+ )
+{
+ UINT16 MrsAddress;
+ UINT8 MaxDimmPerCH;
+ UINT8 ChipSel;
+ UINT8 Value8;
+
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MaxDimmPerCH = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ NBPtr->MCTPtr->SocketId,
+ NBPtr->ChannelPtr->ChannelID);
+ ChipSel = (UINT8) (0x0FF & NBPtr->GetBitField (NBPtr, BFMrsChipSel));
+
+ // BA2=0,BA1=0,BA0=1
+ NBPtr->SetBitField (NBPtr, BFMrsBank, 1);
+
+ MrsAddress = 0;
+
+ // program MrsAddress[5,1]=output driver impedance control (DIC):
+ // based on F2x[1,0]84[DrvImpCtrl]
+ if (!(NBPtr->IsSupported[CheckDrvImpCtrl])) {
+ Value8 = (UINT8)NBPtr->GetBitField (NBPtr, BFDrvImpCtrl);
+ if ((Value8 & ((UINT8) 1 << 1)) != 0) {
+ MrsAddress |= ((UINT16) 1 << 5);
+ }
+ if ((Value8 & ((UINT8) 1 << 0)) != 0) {
+ MrsAddress |= ((UINT16) 1 << 1);
+ }
+ } else {
+ MrsAddress |= ((UINT16) 1 << 1);
+ }
+ // program MrsAddress[9,6,2]=nominal termination resistance of ODT (RTT):
+ // Different CS may have different RTT.
+ //
+ Value8 = NBPtr->MemNGetDramTerm (NBPtr, ChipSel);
+
+ //
+ // If Write Leveling this DIMM
+ //
+ if (Wl) {
+ if ((ChipSel / NBPtr->CsPerDelay) == TargetDIMM) {
+ // Program MrsAddress[7] = 1 for Write leveling enable
+ MrsAddress |= ((UINT16) 1 << 7);
+ if (ChipSel & 1) {
+ // Output buffer disabled, MrsAddress[7] (Qoff = 1)
+ MrsAddress |= ((UINT16) 1 << 12);
+ }
+ // Set Rtt_Nom = Rtt_Wr if there are 2 or more dimms
+ if ((NBPtr->ChannelPtr->DimmQrPresent != 0) || (NBPtr->ChannelPtr->Dimms >= 2)) {
+ Value8 = NBPtr->MemNGetDynDramTerm (NBPtr, ChipSel);
+ } else if (NBPtr->IsSupported[WlRttNomFor1of3Cfg] && (MaxDimmPerCH == 3)) {
+ // For some family, set Rtt_Nom = Rtt_Wr in one of three DIMMs per channel configurations
+ Value8 = NBPtr->MemNGetDynDramTerm (NBPtr, ChipSel);
+ }
+ }
+ NBPtr->FamilySpecificHook[WLMR1] (NBPtr, &MrsAddress);
+ }
+ //
+ // Turn off Rtt_Nom (DramTerm=0) for certain CS in certain configs.
+ //
+ // All odd CS for 4 Dimm Systems
+ if (MaxDimmPerCH == 4) {
+ if (ChipSel & 0x01) {
+ Value8 = 0;
+ }
+ // CS 1 and 5 for 3 Dimm configs
+ } else if (MaxDimmPerCH == 3) {
+ if ((ChipSel == 1) || (ChipSel == 5)) {
+ Value8 = 0;
+ }
+ }
+ // All odd CS of any QR Dimms
+ if ((NBPtr->ChannelPtr->DimmQrPresent & ((UINT8) (1 << (ChipSel >> 1)))) != 0) {
+ if (ChipSel & 0x01) {
+ Value8 = 0;
+ }
+ }
+ if ((Value8 & ((UINT8) 1 << 2)) != 0) {
+ MrsAddress |= ((UINT16) 1 << 9);
+ }
+ if ((Value8 & ((UINT8) 1 << 1)) != 0) {
+ MrsAddress |= ((UINT16) 1 << 6);
+ }
+ if ((Value8 & ((UINT8) 1 << 0)) != 0) {
+ MrsAddress |= ((UINT16) 1 << 2);
+ }
+
+ // program MrsAddress[12]=output disable (QOFF):
+ // based on F2x[1,0]84[Qoff]
+
+ if (!NBPtr->IsSupported[CheckQoff]) {
+ if (NBPtr->GetBitField (NBPtr, BFQoff) != 0) {
+ MrsAddress |= ((UINT16) 1 << 12);
+ }
+ }
+
+ // program MrsAddress[11]=TDQS:
+ // based on F2x[1,0]94[RDqsEn]
+
+ if ((NBPtr->DCTPtr->Timings.Dimmx4Present != 0) && (NBPtr->DCTPtr->Timings.Dimmx8Present != 0)) {
+ if (!(NBPtr->IsSupported[SetTDqsForx8DimmOnly]) || ((NBPtr->DCTPtr->Timings.Dimmx8Present & ((UINT8) 1 << (ChipSel >> 1))) != 0)) {
+ MrsAddress |= ((UINT16) 1 << 11);
+ }
+ }
+
+ NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function calculates the EMRS2 value
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTEMRS23 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT32 MrsAddress;
+ UINT8 DramTermDyn;
+ UINT8 MaxDimmPerCH;
+ UINT8 ChipSel;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+
+ MaxDimmPerCH = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID );
+ ChipSel = (UINT8) (0x0FF & NBPtr->GetBitField (NBPtr, BFMrsChipSel));
+
+ // BA2=0,BA1=1,BA0=0
+ NBPtr->SetBitField (NBPtr, BFMrsBank, 2);
+
+ // program MrsAddress[5:3]=CAS write latency (CWL):
+ MrsAddress = NBPtr->MemNGetMR2CWL (NBPtr);
+
+ // program MrsAddress[6]=auto self refresh method (ASR):
+ // program MrsAddress[7]=self refresh temperature range (SRT):
+ MrsAddress |= 1 << 6;
+ MrsAddress &= ( ~ (1 << 7));
+
+ // program MrsAddress[10:9]=dynamic termination during writes (RTT_WR):
+ DramTermDyn = NBPtr->MemNGetDynDramTerm (NBPtr, ChipSel);
+ // Special Case for 1 DR Unbuffered Dimm in 3 Dimm/Ch
+ if (!(NBPtr->MCTPtr->Status[SbRegistered])) {
+ if (MaxDimmPerCH == 3) {
+ if (NBPtr->ChannelPtr->Dimms == 1) {
+ if ((NBPtr->ChannelPtr->DimmDrPresent & ((UINT8) (1 << (ChipSel >> 1)))) != 0) {
+ DramTermDyn = 1;
+ }
+ }
+ }
+ }
+ MrsAddress |= (UINT16) DramTermDyn << 9;
+
+ NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function calculates the EMRS3 value
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTEMRS33 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+
+ // BA2=0,BA1=1,BA0=1
+ NBPtr->SetBitField (NBPtr, BFMrsBank, 3);
+
+ // program MrsAddress[1:0]=multi purpose register address location
+ // (MPR Location):based on F2x[1,0]84[MprLoc]
+ // program MrsAddress[2]=multi purpose register
+ // (MPR):based on F2x[1,0]84[MprEn]
+ NBPtr->SetBitField (NBPtr, BFMrsAddress, (NBPtr->GetBitField (NBPtr, BFDramMRSReg) >> 24) & 0x0007);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This sets MRS value
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTMRS3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT32 MrsAddress;
+ MEM_NB_BLOCK *NBPtr;
+ UINT32 Ppd;
+
+ NBPtr = TechPtr->NBPtr;
+
+ // BA2=0,BA1=0,BA0=0
+ NBPtr->SetBitField (NBPtr, BFMrsBank, 0);
+
+ // program MrsAddress[1:0]=burst length and control method
+ // (BL):based on F2x[1,0]84[BurstCtrl]
+ MrsAddress = NBPtr->GetBitField (NBPtr, BFBurstCtrl);
+
+ // program MrsAddress[3]=1 (BT):interleaved
+ MrsAddress |= (UINT16) 1 << 3;
+
+ // program MrsAddress[6:4,2]=read CAS latency
+ MrsAddress |= NBPtr->MemNGetMR0CL (NBPtr);
+
+ // program MrsAddress[11:9]=write recovery for auto-precharge
+ MrsAddress |= NBPtr->MemNGetMR0WR (NBPtr);
+
+ // program MrsAddress[12] (PPD):based on F2x[1,0]84[PChgPDModeSel]
+ Ppd = NBPtr->GetBitField (NBPtr, BFPchgPDModeSel);
+ NBPtr->FamilySpecificHook[MR0_PPD] (NBPtr, &Ppd);
+ IDS_OPTION_HOOK (IDS_MEM_MR0, &Ppd, &TechPtr->NBPtr->MemPtr->StdHeader);
+ MrsAddress |= Ppd << 12;
+
+ // program MrsAddress[8]=1 (DLL):DLL reset
+ MrsAddress |= (UINT32) 1 << 8;
+
+ // During memory initialization, the value sent to MR0 is saved for S3 resume
+ NBPtr->MemNSaveMR0 (NBPtr, MrsAddress);
+
+ NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This send all MR commands to a rank in sequence 2-3-1-0
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] ChipSel - Target Chip Select
+ */
+
+VOID
+MemTSendAllMRCmds3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 ChipSel
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+
+ NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+
+ // 13.Send EMRS(2)
+ MemTEMRS23 (TechPtr);
+ AGESA_TESTPOINT (TpProcMemSendMRS2, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->SendMrsCmd (NBPtr);
+
+ // 14.Send EMRS(3). Ordinarily at this time, MrsAddress[2:0]=000b
+ MemTEMRS33 (TechPtr);
+ AGESA_TESTPOINT (TpProcMemSendMRS3, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->SendMrsCmd (NBPtr);
+
+ // 15.Send EMRS(1).
+ MemTEMRS13 (TechPtr, FALSE, (ChipSel >> 1));
+ AGESA_TESTPOINT (TpProcMemSendMRS1, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->SendMrsCmd (NBPtr);
+
+ // 16.Send MRS with MrsAddress[8]=1(reset the DLL)
+ MemTMRS3 (TechPtr);
+ AGESA_TESTPOINT (TpProcMemSendMRS0, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->SendMrsCmd (NBPtr);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtsdi3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtsdi3.h
new file mode 100644
index 0000000..69461e3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtsdi3.h
@@ -0,0 +1,96 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtsdi3.h
+ *
+ * Technology software DRAM init for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MTSDI3_H_
+#define _MTSDI3_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+MemTEMRS33 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemTMRS3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemTEMRS13 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN BOOLEAN Wl,
+ IN UINT8 TargetDIMM
+ );
+
+VOID
+MemTEMRS23 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+#endif /* _MTSDI3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtspd3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtspd3.c
new file mode 100644
index 0000000..5e20a3f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtspd3.c
@@ -0,0 +1,1202 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtspd3.c
+ *
+ * Technology SPD supporting functions for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 85961 $ @e \$Date: 2013-01-14 19:58:20 -0600 (Mon, 14 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mu.h"
+#include "mtspd3.h"
+#include "mftds.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTSPD3_FILECODE
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemTCRCCheck3 (
+ IN OUT UINT8 *SPDPtr
+ );
+
+UINT8
+STATIC
+MemTSPDGetTCL3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+STATIC
+MemTCheckBankAddr3 (
+ IN UINT8 Encode,
+ OUT UINT8 *Index
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the DRAM mode
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - indicates that the DRAM mode is set to DDR3
+ */
+
+BOOLEAN
+MemTSetDramMode3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFLegacyBiosMode, 0);
+ TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFDdr3Mode, 1);
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determines if DIMMs are present. It checks checksum and interrogates the SPDs
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - indicates that a FATAL error has not occurred
+ * @return FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTDIMMPresence3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 Dct;
+ UINT8 Channel;
+ UINT8 i;
+ MEM_PARAMETER_STRUCT *RefPtr;
+ UINT8 *SpdBufferPtr;
+ DIE_STRUCT *MCTPtr;
+ DCT_STRUCT *DCTPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+ MEM_NB_BLOCK *NBPtr;
+ BOOLEAN SPDCtrl;
+ UINT8 Devwidth;
+ UINT8 MaxDimms;
+ UINT8 NumDimmslots;
+ UINT8 Value8;
+ UINT16 DimmMask;
+ UINT32 DimmValidMask;
+
+ NBPtr = TechPtr->NBPtr;
+ RefPtr = NBPtr->RefPtr;
+ MCTPtr = NBPtr->MCTPtr;
+
+ SPDCtrl = UserOptions.CfgIgnoreSpdChecksum;
+ DimmValidMask = 0;
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ DCTPtr = NBPtr->DCTPtr;
+ for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+ NBPtr->SwitchChannel (NBPtr, Channel);
+ ChannelPtr = NBPtr->ChannelPtr;
+ ChannelPtr->DimmQrPresent = 0;
+ //
+ // Get the maximum number of DIMMs
+ //
+ MaxDimms = MAX_DIMMS_PER_CHANNEL;
+ NumDimmslots = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+ MCTPtr->SocketId,
+ ChannelPtr->ChannelID);
+ DimmValidMask |= (NumDimmslots == 3) ? 0x7 : 0x3;
+
+ for (i = 0; i < MaxDimms; i++) {
+ // Bitmask representing dimm #i.
+ DimmMask = (UINT16)1 << i;
+ //
+ if (MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, i)) {
+ MCTPtr->DimmPresent |= DimmMask;
+ //
+ // Check for valid checksum value
+ //
+ AGESA_TESTPOINT (TpProcMemSPDChecking, &(NBPtr->MemPtr->StdHeader));
+ if (SpdBufferPtr[SPD_TYPE] == JED_DDR3SDRAM) {
+ ChannelPtr->ChDimmValid |= DimmMask;
+ MCTPtr->DimmValid |= DimmMask;
+ } else if (NBPtr->IsSupported[G5DimmInD3Socket]) {
+ // If a non-DDR3 DIMM is installed, mark all DIMMs of that channel as not present
+ MCTPtr->DimmPresent &= ~((UINT32) 0xFF << Dct);
+ MCTPtr->DimmValid &= ~((UINT32) 0xFF << Dct);
+ ChannelPtr->ChDimmValid = 0;
+ DCTPtr->Timings.DctDimmValid = 0;
+ MCTPtr->ErrStatus[EsbDimmMismatchM] = TRUE;
+ PutEventLog (AGESA_ERROR, MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, MCTPtr);
+ continue;
+ } else {
+ // Current socket is set up to only support DDR3 dimms.
+ IDS_ERROR_TRAP;
+ }
+ if (!MemTCRCCheck3 (SpdBufferPtr) && !SPDCtrl && !NBPtr->IsSupported[AMPIsEnabled]) {
+ //
+ // NV_SPDCHK_RESTRT is set to 0,
+ // cannot ignore faulty SPD checksum
+ //
+ // Indicate checksum error
+ ChannelPtr->DimmSpdCse |= DimmMask;
+ PutEventLog (AGESA_ERROR, MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, MCTPtr);
+ }
+ //
+ // Check module type information.
+ //
+ if (SpdBufferPtr[SPD_DIMM_TYPE] == JED_LRDIMM) {
+ //
+ // LRDIMMS
+ //
+ if (i < NumDimmslots) {
+ ChannelPtr->LrDimmPresent |= DimmMask;
+ MCTPtr->LrDimmPresent |= DimmMask;
+
+ if (!UserOptions.CfgMemoryLRDimmCapable) {
+ PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_LRDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ IDS_ERROR_TRAP;
+ }
+ TechPtr->TechnologySpecificHook[LrdimmPresence] (TechPtr, &i);
+ }
+ }
+ if (SpdBufferPtr[SPD_DIMM_TYPE] == JED_RDIMM || SpdBufferPtr[SPD_DIMM_TYPE] == JED_MINIRDIMM) {
+ //
+ // RDIMMS
+ //
+ ChannelPtr->RegDimmPresent |= DimmMask;
+ MCTPtr->RegDimmPresent |= DimmMask;
+ if (!UserOptions.CfgMemoryRDimmCapable) {
+ PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_RDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ IDS_ERROR_TRAP;
+ }
+ }
+ if ((SpdBufferPtr[SPD_DIMM_TYPE] == JED_UDIMM) && !UserOptions.CfgMemoryUDimmCapable) {
+ PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_UDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ IDS_ERROR_TRAP;
+ }
+ if ((SpdBufferPtr[SPD_DIMM_TYPE] == JED_SODIMM) || (SpdBufferPtr[SPD_DIMM_TYPE] == JED_72B_SOUDIMM)) {
+ ChannelPtr->SODimmPresent |= DimmMask;
+ if (!UserOptions.CfgMemorySODimmCapable) {
+ PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_SODIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ IDS_ERROR_TRAP;
+ }
+ }
+ //
+ // Check error correction type
+ //
+ if ((SpdBufferPtr[SPD_ECCBITS] & JED_ECC) != 0) {
+ MCTPtr->DimmEccPresent |= DimmMask; // Dimm has ECC
+ }
+ //
+ // Get the Dimm width data
+ //
+ Devwidth = SpdBufferPtr[SPD_DEV_WIDTH] & 0x7;
+ switch (Devwidth) {
+ case 0:
+ ChannelPtr->Dimmx4Present |= DimmMask;
+ if ((ChannelPtr->LrDimmPresent & DimmMask) == 0) {
+ //
+ // DimmNibbleAccess indicates that a DIMM will use nibble signaling and use nibble training.
+ // LRDIMMs will not use Nibble based signaling even if x4 parts are present.
+ //
+ if (i < NumDimmslots) {
+ ChannelPtr->DimmNibbleAccess |= DimmMask;
+ }
+ }
+ Devwidth = 4;
+ break;
+ case 1:
+ ChannelPtr->Dimmx8Present |= DimmMask;
+ Devwidth = 8;
+ break;
+ case 2:
+ ChannelPtr->Dimmx16Present |= DimmMask;
+ Devwidth = 16;
+ break;
+ default:
+ IDS_ERROR_TRAP;
+ }
+ //
+ // Check for 'analysis probe installed'
+ // if (SpdBufferPtr[SPD_ATTRIB] & JED_PROBE_MSK)
+ //
+ // Determine the geometry of the DIMM module
+ // if (SpdBufferPtr[SPD_DM_BANKS] & SP_DPL_BIT)
+ //
+ // specify the number of ranks
+ //
+ Value8 = ((SpdBufferPtr[SPD_RANKS] >> 3) & 0x07) + 1;
+ if (Value8 == 5) {
+ // Octal Rank
+ Value8 = 8;
+ }
+ //
+ // For LRDIMMS we will assume that if there are at least 4 Physical ranks, then it Could be used
+ // as a QR RDIMM with a rank Mux of x1 and therefore all four CS will be used. So an 8R LRDIMM will
+ // be marked as a QR even if Rank multiplication allows it to use only 2 logical ranks.
+ //
+ if ((ChannelPtr->LrDimmPresent & DimmMask) != 0) {
+ //
+ // LRDIMM Physical Ranks
+ //
+ ChannelPtr->LrdimmPhysicalRanks[i] = Value8;
+ }
+ if (Value8 > 2) {
+ if (!UserOptions.CfgMemoryQuadRankCapable) {
+ PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_QRDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ }
+ //
+ // Mark this Dimm as Quad Rank
+ //
+ ChannelPtr->DimmQrPresent |= DimmMask;
+ Value8 = 2;
+ } else if (Value8 == 2) {
+ ChannelPtr->DimmDrPresent |= DimmMask; // Dual rank dimms
+ } else {
+ ChannelPtr->DimmSRPresent |= DimmMask; // Single rank dimms
+ }
+ //
+ // Calculate bus loading per Channel
+ if (Devwidth == 16) {
+ Devwidth = 4;
+ } else if (Devwidth == 4) {
+ Devwidth = 16;
+ }
+ //
+ // Double Addr bus load value for dual rank DIMMs (Unless LRDIMM)
+ //
+ if (((ChannelPtr->LrDimmPresent & DimmMask) == 0) && (Value8 == 2) ) {
+ Devwidth = Devwidth << 1;
+ }
+ //
+ ChannelPtr->Ranks = ChannelPtr->Ranks + Value8;
+ ChannelPtr->Loads = ChannelPtr->Loads + Devwidth;
+ if ((i < NumDimmslots) || ((ChannelPtr->DimmQrPresent & DimmMask) == 0)) {
+ ChannelPtr->Dimms++;
+ }
+ //
+ // Check address mirror support for Unbuffered Dimms or LRDimms
+ //
+ if ((ChannelPtr->RegDimmPresent & DimmMask) == 0) {
+ if ((SpdBufferPtr[SPD_ADDRMAP] & 1) != 0) {
+ ChannelPtr->DimmMirrorPresent |= DimmMask;
+ }
+ }
+ //
+ // Get byte62: Reference Raw Card information
+ //
+ ChannelPtr->RefRawCard[i] = SpdBufferPtr[SPD_RAWCARD] & 0x1F;
+ //
+ // Get control word values for RC3, RC4 and RC5
+ //
+ ChannelPtr->CtrlWrd03[i] = SpdBufferPtr[SPD_CTLWRD03] >> 4;
+ ChannelPtr->CtrlWrd04[i] = SpdBufferPtr[SPD_CTLWRD04] & 0x0F;
+ ChannelPtr->CtrlWrd05[i] = SpdBufferPtr[SPD_CTLWRD05] >> 4;
+ //
+ // Temporarily store info. of SPD byte 63 into CtrlWrd02(s),
+ // and they will be used late to calculate real RC2 and RC8 value
+ //
+ ChannelPtr->CtrlWrd02[i] = SpdBufferPtr[SPD_ADDRMAP] & 0x03;
+ //
+ // Copy the number of registers to the Ps Block to persist across frequency changes
+ //
+ NBPtr->PsPtr->NumOfReg[i] = SpdBufferPtr[SPD_ADDRMAP] & 0x03;
+ //
+ // Workaround for early revisions of DIMMs which SPD byte 63 is 0
+ //
+ if (NBPtr->PsPtr->NumOfReg[i] == JED_UNDEFINED) {
+ NBPtr->PsPtr->NumOfReg[i] = 1;
+ }
+ } // if DIMM present
+ } // Dimm loop
+
+ if (Channel == 0) {
+ DCTPtr->Timings.DctDimmValid = ChannelPtr->ChDimmValid;
+ DCTPtr->Timings.DimmMirrorPresent = ChannelPtr->DimmMirrorPresent;
+ DCTPtr->Timings.DimmSpdCse = ChannelPtr->DimmSpdCse;
+ DCTPtr->Timings.DimmQrPresent = ChannelPtr->DimmQrPresent;
+ DCTPtr->Timings.DimmDrPresent = ChannelPtr->DimmDrPresent;
+ DCTPtr->Timings.DimmSRPresent = ChannelPtr->DimmSRPresent;
+ DCTPtr->Timings.Dimmx4Present = ChannelPtr->Dimmx4Present;
+ DCTPtr->Timings.Dimmx8Present = ChannelPtr->Dimmx8Present;
+ DCTPtr->Timings.Dimmx16Present = ChannelPtr->Dimmx16Present;
+ }
+ if ((Channel != 1) || (Dct != 1)) {
+ MCTPtr->DimmPresent <<= 8;
+ MCTPtr->DimmValid <<= 8;
+ MCTPtr->RegDimmPresent <<= 8;
+ MCTPtr->LrDimmPresent <<= 8;
+ MCTPtr->DimmEccPresent <<= 8;
+ MCTPtr->DimmParPresent <<= 8;
+ DimmValidMask <<= 8;
+ }
+ } // Channel loop
+ } // DCT loop
+
+ // If we have DIMMs, some further general characteristics checking
+ if (MCTPtr->DimmValid != 0) {
+ // If there are registered dimms, all the dimms must be registered
+ if (MCTPtr->RegDimmPresent == MCTPtr->DimmValid) {
+ // All dimms registered
+ MCTPtr->Status[SbRegistered] = TRUE;
+ MCTPtr->Status[SbParDimms] = TRUE; // All DDR3 RDIMMs are parity capable
+ TechPtr->SetDqsEccTmgs = MemTSetDQSEccTmgsRDdr3; // Change the function pointer for DQS ECC timing
+ } else if (MCTPtr->RegDimmPresent != 0) {
+ // We have an illegal DIMM mismatch
+ PutEventLog (AGESA_FATAL, MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_FATAL, MCTPtr);
+ }
+ // If there are LrDimms, all the dimms must be LrDimms
+ if (MCTPtr->LrDimmPresent == (MCTPtr->DimmValid & DimmValidMask)) {
+ // All dimms LRDIMMs
+ MCTPtr->Status[SbLrdimms] = TRUE;
+ MCTPtr->Status[SbParDimms] = TRUE; // All DDR3 RDIMMs are parity capable
+ } else if (MCTPtr->LrDimmPresent != 0) {
+ // We have an illegal DIMM mismatch
+ PutEventLog (AGESA_FATAL, MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_FATAL, MCTPtr);
+ }
+
+ // check the ECC capability of the DIMMs
+ if (MCTPtr->DimmEccPresent == MCTPtr->DimmValid) {
+ MCTPtr->Status[SbEccDimms] = TRUE; // All dimms ECC capable
+ }
+ } else {
+ }
+
+ NBPtr->SwitchDCT (NBPtr, 0);
+ NBPtr->SwitchChannel (NBPtr, 0);
+ return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finds the maximum frequency that each channel is capable to run at.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - indicates that a FATAL error has not occurred
+ * @return FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTSPDGetTargetSpeed3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 *SpdBufferPtr;
+ UINT8 Dimm;
+ UINT8 Dct;
+ UINT8 Channel;
+ INT32 MTB_ps;
+ INT32 FTB_ps;
+ INT32 TCKmin_ps;
+ INT32 Value32;
+ MEM_NB_BLOCK *NBPtr;
+ DCT_STRUCT *DCTPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ DCTPtr = NBPtr->DCTPtr;
+ TCKmin_ps = 0;
+ for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+ NBPtr->SwitchChannel (NBPtr, Channel);
+ ChannelPtr = NBPtr->ChannelPtr;
+ for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+ if ((ChannelPtr->ChDimmValid & ((UINT8)1 << Dimm)) != 0) {
+ MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, Dimm);
+
+ // Determine tCKmin(all) which is the largest tCKmin
+ // value for all modules on the memory Channel (SPD byte 12).
+ //
+ MTB_ps = ((INT32) SpdBufferPtr[SPD_DIVIDENT] * 1000) / SpdBufferPtr[SPD_DIVISOR];
+ FTB_ps = (SpdBufferPtr[SPD_FTB] >> 4) / (SpdBufferPtr[SPD_FTB] & 0xF);
+ Value32 = (MTB_ps * SpdBufferPtr[SPD_TCK]) + (FTB_ps * (INT8) SpdBufferPtr[SPD_TCK_FTB]) ;
+ if (TCKmin_ps < Value32) {
+ TCKmin_ps = Value32;
+ }
+ }
+ }
+ }
+ if (TCKmin_ps <= 938) {
+ DCTPtr->Timings.TargetSpeed = DDR2133_FREQUENCY;
+ } else if (TCKmin_ps <= 1071) {
+ DCTPtr->Timings.TargetSpeed = DDR1866_FREQUENCY;
+ } else if (TCKmin_ps <= 1250) {
+ DCTPtr->Timings.TargetSpeed = DDR1600_FREQUENCY;
+ } else if (TCKmin_ps <= 1500) {
+ DCTPtr->Timings.TargetSpeed = DDR1333_FREQUENCY;
+ } else if (TCKmin_ps <= 1875) {
+ DCTPtr->Timings.TargetSpeed = DDR1066_FREQUENCY;
+ } else if (TCKmin_ps <= 2500) {
+ DCTPtr->Timings.TargetSpeed = DDR800_FREQUENCY;
+ } else {
+ DCTPtr->Timings.TargetSpeed = DDR667_FREQUENCY;
+ }
+ }
+
+ // Ensure the target speed can be applied to all channels of the current node
+ NBPtr->SyncTargetSpeed (NBPtr);
+
+ // Set the start-up frequency
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ NBPtr->DCTPtr->Timings.Speed = TechPtr->NBPtr->StartupSpeed;
+ }
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function check the symmetry of DIMM pairs (DIMM on Channel A matching with
+ * DIMM on Channel B), the overall DIMM population, and determine the width mode:
+ * 64-bit, 64-bit muxed, 128-bit.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - indicates that a FATAL error has not occurred
+ * @return FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTSPDCalcWidth3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 *SpdBufferAPtr;
+ UINT8 *SpdBufferBPtr;
+ MEM_NB_BLOCK *NBPtr;
+ DIE_STRUCT *MCTPtr;
+ DCT_STRUCT *DCTPtr;
+ UINT8 i;
+ UINT16 DimmMask;
+ UINT8 UngangMode;
+
+ NBPtr = TechPtr->NBPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ DCTPtr = NBPtr->DCTPtr;
+ UngangMode = UserOptions.CfgMemoryModeUnganged;
+ // Does not support ganged mode for DDR3 dimms
+ ASSERT (UngangMode);
+ IDS_OPTION_HOOK (IDS_GANGING_MODE, &UngangMode, &(NBPtr->MemPtr->StdHeader));
+
+ // Check symmetry of channel A and channel B dimms for 128-bit mode
+ // capability.
+ //
+ AGESA_TESTPOINT (TpProcMemModeChecking, &(NBPtr->MemPtr->StdHeader));
+ i = 0;
+ if (!UngangMode) {
+ if (MCTPtr->DctData[0].Timings.DctDimmValid == MCTPtr->DctData[1].Timings.DctDimmValid) {
+ for (; i < MAX_DIMMS_PER_CHANNEL; i++) {
+ DimmMask = (UINT16)1 << i;
+ if ((DCTPtr->Timings.DctDimmValid & DimmMask) != 0) {
+ NBPtr->SwitchDCT (NBPtr, 0);
+ MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferAPtr, i);
+ NBPtr->SwitchDCT (NBPtr, 1);
+ MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferBPtr, i);
+ // compare rows and columns
+ if ((SpdBufferAPtr[SPD_ROW_SZ]&0x3F) != (SpdBufferBPtr[SPD_ROW_SZ]&0x3F)) {
+ break;
+ }
+ if ((SpdBufferAPtr[SPD_DENSITY]&0x0F) != (SpdBufferBPtr[SPD_DENSITY]&0x0F)) {
+ break;
+ }
+ // compare ranks and devwidth
+ if ((SpdBufferAPtr[SPD_DEV_WIDTH]&0x7F) != (SpdBufferBPtr[SPD_DEV_WIDTH]&0x7F)) {
+ break;
+ }
+ }
+ }
+ }
+ if (i < MAX_DIMMS_PER_CHANNEL) {
+ PutEventLog (AGESA_ALERT, MEM_ALERT_ORG_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ALERT, MCTPtr);
+ } else {
+ NBPtr->Ganged = TRUE;
+ MCTPtr->GangedMode = TRUE;
+ MCTPtr->Status[Sb128bitmode] = TRUE;
+ NBPtr->SetBitField (NBPtr, BFDctGangEn, 1);
+ }
+ }
+
+ return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Initialize DCT Timing registers as per DIMM SPD.
+ * For primary timing (T, CL) use best case T value.
+ * For secondary timing params., use most aggressive settings
+ * of slowest DIMM.
+ *
+ * Note:
+ * There are three components to determining "maximum frequency": SPD component,
+ * Bus load component, and "Preset" max frequency component.
+ * The SPD component is a function of the min cycle time specified by each DIMM,
+ * and the interaction of cycle times from all DIMMs in conjunction with CAS
+ * latency. The SPD component only applies when user timing mode is 'Auto'.
+ *
+ * The Bus load component is a limiting factor determined by electrical
+ * characteristics on the bus as a result of varying number of device loads. The
+ * Bus load component is specific to each platform but may also be a function of
+ * other factors. The bus load component only applies when user timing mode is
+ * ' Auto'.
+ *
+ * The Preset component is subdivided into three items and is the minimum of
+ * the set: Silicon revision, user limit setting when user timing mode is 'Auto' and
+ * memclock mode is 'Limit', OEM build specification of the maximum frequency.
+ * The Preset component only applies when user timing mode is 'Auto'.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - indicates that a FATAL error has not occurred
+ * @return FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTAutoCycTiming3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ CONST UINT8 SpdIndexes[] = {
+ SPD_TRCD,
+ SPD_TRP,
+ SPD_TRTP,
+ SPD_TRAS,
+ SPD_TRC,
+ SPD_TWR,
+ SPD_TRRD,
+ SPD_TWTR,
+ SPD_TFAW
+ };
+
+ CONST UINT8 SpdFTBIndexes[] = {
+ SPD_TRCD_FTB,
+ SPD_TRP_FTB,
+ 0,
+ 0,
+ SPD_TRC_FTB,
+ 0,
+ 0,
+ 0,
+ 0
+ };
+
+ UINT8 *SpdBufferPtr;
+ INT32 MiniMaxTmg[GET_SIZE_OF (SpdIndexes)];
+ UINT8 MiniMaxTrfc[4];
+
+ DIE_STRUCT *MCTPtr;
+ DCT_STRUCT *DCTPtr;
+ MEM_NB_BLOCK *NBPtr;
+ UINT16 DimmMask;
+ INT32 Value32;
+ INT32 MTB_ps;
+ INT32 FTB_ps;
+ INT32 TCK_ps;
+ UINT8 i;
+ UINT8 j;
+ UINT8 Value8;
+ UINT8 *StatTmgPtr;
+ UINT16 *StatDimmTmgPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ DCTPtr = NBPtr->DCTPtr;
+ // initialize mini-max arrays
+ for (j = 0; j < GET_SIZE_OF (MiniMaxTmg); j++) {
+ MiniMaxTmg[j] = 0;
+ }
+ for (j = 0; j < GET_SIZE_OF (MiniMaxTrfc); j++) {
+ MiniMaxTrfc[j] = 0;
+ }
+
+ // ======================================================================
+ // Get primary timing (CAS Latency and Cycle Time)
+ // ======================================================================
+ // Get OEM specific load variant max
+ //
+
+ //======================================================================
+ // Gather all DIMM mini-max values for cycle timing data
+ //======================================================================
+ //
+ DimmMask = 1;
+ for (i = 0; i < (MAX_CS_PER_CHANNEL / 2); i++) {
+ if ((DCTPtr->Timings.DctDimmValid & DimmMask) != 0) {
+ MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, i);
+ MTB_ps = ((INT32) SpdBufferPtr[SPD_DIVIDENT] * 1000) / SpdBufferPtr[SPD_DIVISOR];
+ FTB_ps = (SpdBufferPtr[SPD_FTB] >> 4) / (SpdBufferPtr[SPD_FTB] & 0xF);
+
+ for (j = 0; j < GET_SIZE_OF (SpdIndexes); j++) {
+ Value32 = (UINT16)SpdBufferPtr[SpdIndexes[j]];
+ if (SpdIndexes[j] == SPD_TRC) {
+ Value32 |= ((UINT16)SpdBufferPtr[SPD_UPPER_TRC] & 0xF0) << 4;
+ } else if (SpdIndexes[j] == SPD_TRAS) {
+ Value32 |= ((UINT16)SpdBufferPtr[SPD_UPPER_TRAS] & 0x0F) << 8;
+ } else if (SpdIndexes[j] == SPD_TFAW) {
+ Value32 |= ((UINT16)SpdBufferPtr[SPD_UPPER_TFAW] & 0x0F) << 8;
+ }
+
+ Value32 *= MTB_ps;
+ if (SpdFTBIndexes[j] != 0) {
+ Value32 += (FTB_ps * (INT8) SpdBufferPtr[SpdFTBIndexes[j]]) ;
+ }
+ if (MiniMaxTmg[j] < Value32) {
+ MiniMaxTmg[j] = Value32;
+ }
+ }
+
+ // get Trfc0 - Trfc3 values
+ Value8 = SpdBufferPtr[SPD_DENSITY] & 0x0F;
+ if (MiniMaxTrfc[i] < Value8) {
+ MiniMaxTrfc[i] = Value8;
+ }
+ }
+ DimmMask <<= 1;
+ }
+
+ // ======================================================================
+ // Convert DRAM CycleTiming values and store into DCT structure
+ // ======================================================================
+ //
+ TCK_ps = 1000500 / DCTPtr->Timings.Speed;
+
+ StatDimmTmgPtr = &DCTPtr->Timings.DIMMTrcd;
+ StatTmgPtr = &DCTPtr->Timings.Trcd;
+ for (j = 0; j < GET_SIZE_OF (SpdIndexes); j++) {
+ Value32 = MiniMaxTmg[j];
+
+ MiniMaxTmg[j] = (MiniMaxTmg[j] + TCK_ps - 1) / TCK_ps;
+
+ StatDimmTmgPtr[j] = (UINT16) (Value32 / (1000 / 40));
+ StatTmgPtr[j] = (UINT8) MiniMaxTmg[j];
+ }
+ DCTPtr->Timings.Trfc0 = MiniMaxTrfc[0];
+ DCTPtr->Timings.Trfc1 = MiniMaxTrfc[1];
+ DCTPtr->Timings.Trfc2 = MiniMaxTrfc[2];
+ DCTPtr->Timings.Trfc3 = MiniMaxTrfc[3];
+
+ DCTPtr->Timings.CasL = MemTSPDGetTCL3 (TechPtr);
+
+ //======================================================================
+ // Program DRAM Timing values
+ //======================================================================
+ //
+ NBPtr->ProgramCycTimings (NBPtr);
+
+ MemFInitTableDrive (NBPtr, MTAfterAutoCycTiming);
+
+ return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the bank addressing, program Mask values and build a chip-select population map.
+ * This routine programs PCI 0:24N:2x80 config register.
+ * This routine programs PCI 0:24N:2x60,64,68,6C config registers (CS Mask 0-3)
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - indicates that a FATAL error has not occurred
+ * @return FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTSPDSetBanks3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 *SpdBufferPtr;
+ UINT8 i;
+ UINT8 ChipSel;
+ UINT8 DimmID;
+ UINT8 Value8;
+ UINT8 Rows;
+ UINT8 Cols;
+ UINT8 Ranks;
+ UINT8 Banks;
+ UINT32 BankAddrReg;
+ UINT32 CsMask;
+ UINT16 CSSpdCSE;
+ UINT16 CSExclude;
+ UINT16 DimmQRDR;
+ DIE_STRUCT *MCTPtr;
+ DCT_STRUCT *DCTPtr;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ DCTPtr = NBPtr->DCTPtr;
+ BankAddrReg = 0;
+ CSSpdCSE = 0;
+ CSExclude = 0;
+
+ for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+ DimmID = ChipSel >> 1;
+
+ DimmQRDR = (DCTPtr->Timings.DimmQrPresent) | (DCTPtr->Timings.DimmDrPresent);
+ if ((DCTPtr->Timings.DimmSpdCse & ((UINT16) 1 << DimmID)) != 0) {
+ CSSpdCSE |= (UINT16) ((DimmQRDR & (UINT16) 1 << DimmID) ? 3 : 1) << ChipSel;
+ }
+ if ((DCTPtr->Timings.DimmExclude & ((UINT16) 1 << DimmID)) != 0) {
+ CSExclude |= (UINT16) ((DimmQRDR & (UINT16) 1 << DimmID) ? 3: 1) << ChipSel;
+ }
+
+ if ((DCTPtr->Timings.DctDimmValid & ((UINT16)1 << DimmID)) != 0) {
+ MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, DimmID);
+
+ // Get the basic data
+ Rows = (SpdBufferPtr[SPD_ROW_SZ] >> 3) & 0x7;
+ Cols = SpdBufferPtr[SPD_COL_SZ] & 0x7;
+ Banks = (SpdBufferPtr[SPD_L_BANKS] >> 4) & 0x7;
+ Ranks = ((SpdBufferPtr[SPD_RANKS] >> 3) & 0x07) + 1;
+ if (Ranks == 5) {
+ Ranks = 8;
+ }
+ //
+ // Configure the bank encoding
+ // Use a 6-bit key into a lookup table.
+ // Key (index) = RRRBCC, where CC is the number of Columns minus 9,
+ // RRR is the number of Rows minus 12, and B is the number of banks
+ // minus 3.
+ //
+ Value8 = Cols;
+ Value8 |= (Banks == 1) ? 4 : 0;
+ Value8 |= Rows << 3;
+
+ if (MemTCheckBankAddr3 (Value8, &i)) {
+ //
+ // Mask value=(2pow(rows+cols+banks+3)-1)>>8,
+ // or 2pow(rows+cols+banks-5)-1
+ //
+ Value8 = (Rows + 12) + (Cols + 9) + (Banks + 3) + 3 - 8;
+ if (MCTPtr->Status[Sb128bitmode]) {
+ Value8++;
+ }
+
+ DCTPtr->Timings.CsPresent |= (UINT16)1 << ChipSel;
+
+ if (Ranks >= 2) {
+ DCTPtr->Timings.CsPresent |= (UINT16)1 << (ChipSel + 1);
+ }
+ //
+ // Determine LRDIMM Rank Multiplication
+ //
+ if (TechPtr->TechnologySpecificHook[LrdimmRankMultiplication] (TechPtr, &DimmID)) {
+ //
+ // Increase the CS Size by the rank multiplication factor
+ //
+ Value8 += ((NBPtr->ChannelPtr->LrDimmRankMult[DimmID]) >> 1);
+ CsMask = ((UINT32)1 << Value8) - 1;
+ CsMask &= NBPtr->CsRegMsk;
+ CsMask |= (NBPtr->GetBitField (NBPtr, BFRankDef0 + DimmID) & 0x03);
+ } else {
+ CsMask = ((UINT32)1 << Value8) - 1;
+ CsMask &= NBPtr->CsRegMsk;
+ }
+ //
+ // Update the DRAM CS Mask and BankAddrReg for this chipselect
+ //
+ if ((DCTPtr->Timings.CsPresent & (UINT16)3 << ChipSel) != 0) {
+ NBPtr->SetBitField (NBPtr, BFCSMask0Reg + (ChipSel >> 1), (CsMask));
+ BankAddrReg |= ((UINT32)i << (ChipSel << 1));
+ }
+ } else {
+ //
+ // Dimm is not supported, as no address mapping is found.
+ //
+ DCTPtr->Timings.CsPresent |= (UINT16)1 << ChipSel;
+ DCTPtr->Timings.CsTestFail |= (UINT16)1 << ChipSel;
+ if (Ranks >= 2) {
+ DCTPtr->Timings.CsPresent |= (UINT16)1 << (ChipSel + 1);
+ DCTPtr->Timings.CsTestFail |= (UINT16)1 << (ChipSel + 1);
+ }
+ PutEventLog (AGESA_ERROR, MEM_ERROR_NO_ADDRESS_MAPPING, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, DimmID, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, MCTPtr);
+ }
+ } //if (MemTCheckBankAddr3 (Value8, &i)
+ }
+ // For ranks that need to be excluded, the loading of this rank should be considered
+ // in timing, so need to set CsPresent before setting CsTestFail
+ if ((CSSpdCSE != 0) || (CSExclude != 0)) {
+ if (!NBPtr->MemPtr->ErrorHandling (MCTPtr, NBPtr->Dct, (CSSpdCSE | CSExclude), &NBPtr->MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ }
+ }
+
+ // If there are no chip selects, we have an error situation.
+ if (DCTPtr->Timings.CsPresent == 0) {
+ PutEventLog (AGESA_ERROR, MEM_ERROR_NO_CHIPSELECT, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, MCTPtr);
+ }
+
+ NBPtr->SetBitField (NBPtr, BFDramBankAddrReg, BankAddrReg);
+
+ return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function returns the low bit that will be swapped to enable CS interleaving
+ *
+ * @param[in] BankEnc - AddrMap Bank encoding from F2x80
+ * @param[in] *LowBit - pointer to low bit
+ * @param[in] *HiBit - pointer hight bit
+ *
+ */
+
+VOID
+MemTGetCSIntLvAddr3 (
+ IN UINT8 BankEnc,
+ OUT UINT8 *LowBit,
+ OUT UINT8 *HiBit
+ )
+{
+ CONST UINT8 ArrCodesLo[] = {0, 8, 8, 0, 0, 8, 9, 8, 9, 9, 8, 9};
+ CONST UINT8 ArrCodesHi[] = {0, 20, 21, 0, 0, 22, 22, 23, 23, 24, 24, 25};
+ ASSERT (BankEnc < GET_SIZE_OF (ArrCodesLo));
+ ASSERT (BankEnc < GET_SIZE_OF (ArrCodesHi));
+ // return ArrCodes[BankEnc];
+ *LowBit = ArrCodesLo[BankEnc];
+ *HiBit = ArrCodesHi[BankEnc];
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determines if the checksum is correct
+ *
+ * @param[in] *SPDPtr - Pointer to SPD data
+ *
+ * @return TRUE - CRC check passes
+ * @return FALSE - CRC check fails
+ */
+
+BOOLEAN
+STATIC
+MemTCRCCheck3 (
+ IN OUT UINT8 *SPDPtr
+ )
+{
+ UINT16 Crc;
+ INT16 i;
+ INT16 j;
+ INT16 Count;
+
+ if (SPDPtr[SPD_TYPE] == JED_DDR3SDRAM) {
+ Count = (SPDPtr[SPD_BYTE_USED] & 0x80) ? 117 : 126;
+ Crc = 0;
+ for (j = 0; j < Count; j++) {
+ Crc = Crc ^ ((UINT16)SPDPtr[j] << 8);
+ for (i = 0; i < 8; i++) {
+ if (Crc & 0x8000) {
+ Crc = (Crc << 1) ^ 0x1021;
+ } else {
+ Crc = (Crc << 1);
+ }
+ }
+ }
+ if (*(UINT16 *) (SPDPtr + 126) == Crc) {
+ return TRUE;
+ }
+ }
+
+ return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function returns the CAS latency of the current frequency (DCTPtr->Timings.Speed).
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return CAS Latency
+ */
+
+UINT8
+STATIC
+MemTSPDGetTCL3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 *SpdBufferPtr;
+ UINT8 CLdesired;
+ UINT8 CLactual;
+ UINT8 Dimm;
+ UINT8 Channel;
+ UINT16 CASLat;
+ UINT16 Mask16;
+ INT32 MTB_ps;
+ INT32 FTB_ps;
+ INT32 TAAmin_ps;
+ INT32 TCKproposed_ps;
+ INT32 Value32;
+ BOOLEAN CltFail;
+ MEM_NB_BLOCK *NBPtr;
+ DCT_STRUCT *DCTPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ DCTPtr = NBPtr->DCTPtr;
+
+ CASLat = 0xFFFF;
+ TAAmin_ps = 0;
+ CltFail = FALSE;
+
+ for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+ NBPtr->SwitchChannel (NBPtr, Channel);
+ ChannelPtr = NBPtr->ChannelPtr;
+ for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+ if ((ChannelPtr->ChDimmValid & ((UINT8)1 << Dimm)) != 0) {
+ MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, Dimm);
+
+ // Step 1: Determine the common set of supported CAS Latency
+ // values for all modules on the memory Channel using the CAS
+ // Latencies Supported in SPD bytes 14 and 15.
+ //
+ CASLat &= ((UINT16)SpdBufferPtr[SPD_CASHI] << 8) | SpdBufferPtr[SPD_CASLO];
+
+ // Step 2: Determine tAAmin(all) which is the largest tAAmin
+ // value for all modules on the memory Channel (SPD byte 16).
+ //
+ MTB_ps = ((INT32) SpdBufferPtr[SPD_DIVIDENT] * 1000) / SpdBufferPtr[SPD_DIVISOR];
+ FTB_ps = (SpdBufferPtr[SPD_FTB] >> 4) / (SpdBufferPtr[SPD_FTB] & 0xF);
+ Value32 = (MTB_ps * SpdBufferPtr[SPD_TAA]) + (FTB_ps * (INT8) SpdBufferPtr[SPD_TAA_FTB]) ;
+ if (TAAmin_ps < Value32) {
+ TAAmin_ps = Value32;
+ }
+
+ // Step 3: Determine tCKmin(all) which is the largest tCKmin
+ // value for all modules on the memory Channel (SPD byte 12).
+ // * This step has been done in SPDGetTargetSpeed
+ }
+ }
+ }
+
+ TCKproposed_ps = 1000500 / DCTPtr->Timings.Speed;
+
+ // Step 4: For a proposed tCK value (tCKproposed) between tCKmin(all) and tCKmax,
+ // determine the desired CAS Latency. If tCKproposed is not a standard JEDEC
+ // value (2.5, 1.875, 1.5, or 1.25 ns) then tCKproposed must be adjusted to the
+ // next lower standard tCK value for calculating CLdesired.
+ // CLdesired = ceiling ( tAAmin(all) / tCKproposed )
+ // where tAAmin is defined in Byte 16. The ceiling function requires that the
+ // quotient be rounded up always.
+ //
+ CLdesired = (UINT8) ((TAAmin_ps + TCKproposed_ps - 1) / TCKproposed_ps);
+
+ // Step 5: Choose an actual CAS Latency (CLactual) that is greater than or equal
+ // to CLdesired and is supported by all modules on the memory Channel as
+ // determined in step 1. If no such value exists, choose a higher tCKproposed
+ // value and repeat steps 4 and 5 until a solution is found.
+ //
+ CLactual = 4;
+ for (Mask16 = 1; Mask16 < 0x8000; Mask16 <<= 1) {
+ if (CASLat & Mask16) {
+ if (CLdesired <= CLactual) {
+ break;
+ }
+ }
+ CLactual++;
+ }
+ if (Mask16 == 0x8000) {
+ CltFail = TRUE;
+ }
+
+ // Step 6: Once the calculation of CLactual is completed, the BIOS must also
+ // verify that this CAS Latency value does not exceed tAAmax, which is 20 ns
+ // for all DDR3 speed grades, by multiplying CLactual times tCKproposed. If
+ // not, choose a lower CL value and repeat steps 5 and 6 until a solution is found.
+ //
+ if ((TCKproposed_ps * CLactual) > 20000) {
+ CltFail = TRUE;
+ }
+
+ if (!CltFail) {
+ DCTPtr->Timings.CasL = CLactual;
+ } else {
+ // Fail to find supported Tcl, use 6 clocks since it is required for all DDR3 speed bin.
+ DCTPtr->Timings.CasL = 6;
+ }
+
+ return DCTPtr->Timings.CasL;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function returns the encoded value of bank address.
+ *
+ * @param[in] Encode - RRRBCC, where CC is the number of Columns minus 9,
+ * RRR is the number of Rows minus 12, and B is the number of banks
+ * minus 3.
+ * @param[out] *Index - index in bank address table
+ * @return TRUE - encoded value is found.
+ * FALSE - encoded value is not found.
+ */
+
+BOOLEAN
+STATIC
+MemTCheckBankAddr3 (
+ IN UINT8 Encode,
+ OUT UINT8 *Index
+ )
+{
+ UINT8 i;
+ CONST UINT8 TabBankAddr[] = {
+ 0x3F, 0x01, 0x09, 0x3F, 0x3F, 0x11,
+ 0x0A, 0x19, 0x12, 0x1A, 0x21, 0x22
+ };
+
+ for (i = 0; i < GET_SIZE_OF (TabBankAddr); i++) {
+ if (Encode == TabBankAddr[i]) {
+ *Index = i;
+ return TRUE;
+ }
+ }
+ return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function returns a pointer to the SPD Buffer of a specific dimm on
+ * the current channel.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in,out] **SpdBuffer - Pointer to a pointer to a UINT8 Buffer
+ * @param[in] Dimm - Dimm number
+ *
+ *
+ * @return BOOLEAN - Value of DimmPresent
+ * TRUE = Dimm is present, pointer is valid
+ * FALSE = Dimm is not present, pointer has not been modified.
+ */
+
+BOOLEAN
+MemTGetDimmSpdBuffer3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT UINT8 **SpdBuffer,
+ IN UINT8 Dimm
+ )
+{
+ CH_DEF_STRUCT *ChannelPtr;
+ SPD_DEF_STRUCT *SPDPtr;
+ BOOLEAN DimmPresent;
+
+ DimmPresent = FALSE;
+ ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+ ASSERT (Dimm < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0])))
+ SPDPtr = ChannelPtr->DimmSpdPtr[Dimm];
+
+
+ if (SPDPtr != NULL) {
+ DimmPresent = SPDPtr->DimmPresent;
+ if (DimmPresent) {
+ *SpdBuffer = SPDPtr->Data;
+ }
+ }
+ return DimmPresent;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtspd3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtspd3.h
new file mode 100644
index 0000000..bf13c7f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtspd3.h
@@ -0,0 +1,180 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtspd3.h
+ *
+ * Technology SPD support for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 85961 $ @e \$Date: 2013-01-14 19:58:20 -0600 (Mon, 14 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MTSPD3_H_
+#define _MTSPD3_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*===============================================================================
+ * Jedec DDR III
+ *===============================================================================
+ */
+#define SPD_BYTE_USED 0
+#define SPD_TYPE 2 /* SPD byte read location */
+#define JED_DDR_SDRAM 7 /* Jedec defined bit field */
+#define JED_DDR2_SDRAM 8 /* Jedec defined bit field */
+#define JED_DDR3SDRAM 0xB /* Jedec defined bit field */
+
+#define SPD_DIMM_TYPE 3
+#define SPD_ATTRIB 21
+#define JED_DIF_CK_MSK 0x20 /* Differential Clock Input */
+#define JED_RDIMM 1
+#define JED_MINIRDIMM 5
+#define JED_UDIMM 2
+#define JED_SODIMM 3
+#define JED_LRDIMM 0xB
+#define JED_72B_SOUDIMM 8
+#define JED_UNDEFINED 0 /* Undefined value */
+
+#define SPD_L_BANKS 4 /* [7:4] number of [logical] banks on each device */
+#define SPD_DENSITY 4 /* bit 3:0 */
+#define SPD_ROW_SZ 5 /* bit 5:3 */
+#define SPD_COL_SZ 5 /* bit 2:0 */
+#define SPD_RANKS 7 /* bit 5:3 */
+#define SPD_DEV_WIDTH 7 /* bit 2:0 */
+#define SPD_ECCBITS 8 /* bit 4:3 */
+#define JED_ECC 8
+#define SPD_RAWCARD 62 /* bit 2:0 */
+#define SPD_ADDRMAP 63 /* bit 0 */
+
+#define SPD_CTLWRD03 70 /* bit 7:4 */
+#define SPD_CTLWRD04 71 /* bit 3:0 */
+#define SPD_CTLWRD05 71 /* bit 7:4 */
+
+#define SPD_FTB 9
+
+#define SPD_DIVIDENT 10
+#define SPD_DIVISOR 11
+
+#define SPD_TCK 12
+#define SPD_CASLO 14
+#define SPD_CASHI 15
+#define SPD_TAA 16
+
+#define SPD_TRP 20
+#define SPD_TRRD 19
+#define SPD_TRCD 18
+#define SPD_TRAS 22
+#define SPD_TWR 17
+#define SPD_TWTR 26
+#define SPD_TRTP 27
+#define SPD_TRC 23
+#define SPD_UPPER_TRC 21 /* bit 7:4 */
+#define SPD_UPPER_TRAS 21 /* bit 3:0 */
+#define SPD_TFAW 29
+#define SPD_UPPER_TFAW 28 /* bit 3:0 */
+
+#define SPD_TCK_FTB 34
+#define SPD_TAA_FTB 35
+#define SPD_TRCD_FTB 36
+#define SPD_TRP_FTB 37
+#define SPD_TRC_FTB 38
+
+#define SPD_TRFC_LO 24
+#define SPD_TRFC_HI 25
+
+/*-----------------------------
+ * Jedec DDR II related equates
+ *-----------------------------
+ */
+
+#define CL_DEF 4 /* Default value for failsafe operation. 4=CL 6.0 T */
+#define T_DEF 4 /* Default value for failsafe operation. 4=2.5ns (cycle time) */
+
+#define BIAS_TRTP_T 4
+#define BIAS_TRCD_T 5
+#define BIAS_TRAS_T 15
+#define BIAS_TRC_T 11
+#define BIAS_TRRD_T 4
+#define BIAS_TWR_T 4
+#define BIAS_TRP_T 5
+#define BIAS_TWTR_T 4
+#define BIAS_TFAW_T 14
+
+#define MIN_TRTP_T 4
+#define MAX_TRTP_T 7
+#define MIN_TRCD_T 5
+#define MAX_TRCD_T 12
+#define MIN_TRAS_T 15
+#define MAX_TRAS_T 30
+#define MIN_TRC_T 11
+#define MAX_TRC_T 42
+#define MIN_TRRD_T 4
+#define MAX_TRRD_T 7
+#define MIN_TWR_T 5
+#define MAX_TWR_T 12
+#define MIN_TRP_T 5
+#define MAX_TRP_T 12
+#define MIN_TWTR_T 4
+#define MAX_TWTR_T 7
+#define MIN_TFAW_T 16
+#define MAX_TFAW_T 32
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#endif /* _MTSPD3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mttecc3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mttecc3.c
new file mode 100644
index 0000000..abd7965
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mttecc3.c
@@ -0,0 +1,163 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttecc3.c
+ *
+ * Technology ECC byte support for registered DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTTECC3_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the DQS ECC timings for registered DDR3
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTSetDQSEccTmgsRDdr3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 Dct;
+ UINT8 Dimm;
+ UINT8 i;
+ UINT8 *WrDqsDly;
+ UINT16 *RcvEnDly;
+ UINT8 *RdDqsDly;
+ UINT8 *WrDatDly;
+ UINT8 EccByte;
+ INT16 TempValue;
+
+ MEM_NB_BLOCK *NBPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ EccByte = TechPtr->MaxByteLanes ();
+ NBPtr = TechPtr->NBPtr;
+
+ if (NBPtr->MCTPtr->NodeMemSize) {
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ ChannelPtr = NBPtr->ChannelPtr;
+ for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+ if (NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16)3 << (Dimm * 2))) {
+ i = Dimm * TechPtr->DlyTableWidth ();
+ WrDqsDly = &ChannelPtr->WrDqsDlys[i];
+ RcvEnDly = &ChannelPtr->RcvEnDlys[i];
+ RdDqsDly = &ChannelPtr->RdDqsDlys[i];
+ WrDatDly = &ChannelPtr->WrDatDlys[i];
+ // Receiver DQS Enable:
+ // Receiver DQS enable for ECC bytelane = Receiver DQS enable for bytelane 3 -
+ // [write DQS for bytelane 3 - write DQS for ECC]
+
+ TempValue = (INT16) RcvEnDly[3] - (INT16) (WrDqsDly[3] - WrDqsDly[EccByte]);
+ if (TempValue < 0) {
+ TempValue = 0;
+ }
+ RcvEnDly[EccByte] = (UINT16) TempValue;
+
+ // Read DQS:
+ // Read DQS for ECC bytelane = read DQS of byte lane 3
+ //
+ RdDqsDly[EccByte] = RdDqsDly[3];
+
+ // Write Data:
+ // Write Data for ECC bytelane = Write DQS for ECC +
+ // [write data for bytelane 3 - Write DQS for bytelane 3]
+ TempValue = (INT16) (WrDqsDly[EccByte] + (INT8) (WrDatDly[3] - WrDqsDly[3]));
+ if (TempValue < 0) {
+ TempValue = 0;
+ }
+ WrDatDly[EccByte] = (UINT8) TempValue;
+
+ NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Dimm, EccByte), RcvEnDly[EccByte]);
+ NBPtr->SetTrainDly (NBPtr, AccessRdDqsDly, DIMM_BYTE_ACCESS (Dimm, EccByte), RdDqsDly[EccByte]);
+ NBPtr->SetTrainDly (NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS (Dimm, EccByte), WrDatDly[EccByte]);
+ }
+ }
+ }
+ }
+ }
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mttwl3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mttwl3.c
new file mode 100644
index 0000000..361b56a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mttwl3.c
@@ -0,0 +1,718 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttwl3.c
+ *
+ * Technology Phy assisted write levelization for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mp.h"
+#include "mtsdi3.h"
+#include "mtlrdimm3.h"
+#include "merrhdl.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTTWL3_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[];
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemTWriteLevelizationHw3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Pass
+ );
+
+VOID
+STATIC
+MemTWLPerDimmHw3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Dimm,
+ IN UINT8 Pass
+ );
+
+VOID
+STATIC
+MemTPrepareDIMMs3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 TargetDIMM,
+ IN BOOLEAN Wl
+ );
+
+VOID
+STATIC
+MemTProcConfig3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Dimm,
+ IN UINT8 Pass
+ );
+
+VOID
+STATIC
+MemTBeginWLTrain3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Dimm
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes first pass of Phy assisted write levelization
+ * for a specific node (DDR800).
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTWriteLevelizationHw3Pass1 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ return MemTWriteLevelizationHw3 (TechPtr, 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes second pass of Phy assisted write levelization
+ * for a specific node (DDR1066 and above).
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTWriteLevelizationHw3Pass2 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ // If current speed is higher than start-up speed, do second pass of WL
+ if (TechPtr->NBPtr->DCTPtr->Timings.Speed > TechPtr->NBPtr->StartupSpeed) {
+ return MemTWriteLevelizationHw3 (TechPtr, 2);
+ }
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function prepares for Phy assisted training.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTPreparePhyAssistedTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ // Disable auto refresh by configuring F2x[1, 0]8C[DisAutoRefresh] = 1.
+ TechPtr->NBPtr->BrdcstSet (TechPtr->NBPtr, BFDisAutoRefresh, 1);
+ // Disable ZQ calibration short command by configuring F2x[1, 0]94[ZqcsInterval] = 00b.
+ TechPtr->NBPtr->BrdcstSet (TechPtr->NBPtr, BFZqcsInterval, 0);
+ // Attempt to get the seeds value from PSC tables for WL and RxEn pass1 training if applicable.
+ if (!TechPtr->NBPtr->PsPtr->MemPGetPass1Seeds (TechPtr->NBPtr)) {
+ ASSERT (FALSE);
+ }
+
+ return (BOOLEAN) (TechPtr->NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function revert to normal settings when exiting from Phy assisted training.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTExitPhyAssistedTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ NBPtr = TechPtr->NBPtr;
+
+ // 13.Program F2x[1, 0]8C[DisAutoRefresh] = 0.
+ NBPtr->BrdcstSet (NBPtr, BFDisAutoRefresh, 0);
+ // 14.Program F2x[1, 0]94[ZqcsInterval] to the proper interval for the current memory configuration.
+ NBPtr->BrdcstSet (NBPtr, BFZqcsInterval, 2);
+ NBPtr->FamilySpecificHook[ExitPhyAssistedTraining] (NBPtr, NBPtr);
+
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executed hardware based write levelization for a specific die
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Pass - Pass number (1 (400Mhz) or 2 (>400Mhz))
+ *
+ * @pre Auto refresh and ZQCL must be disabled
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+STATIC
+MemTWriteLevelizationHw3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Pass
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ DCT_STRUCT *DCTPtr;
+ UINT8 Dct;
+ UINT8 ChipSel;
+
+ NBPtr = TechPtr->NBPtr;
+
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart write leveling\n");
+ AGESA_TESTPOINT (TpProcMemWriteLevelizationTraining, &(NBPtr->MemPtr->StdHeader));
+ // Begin DQS Write timing training
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ DCTPtr = NBPtr->DCTPtr;
+
+ TechPtr->WLCriticalDelay = 0x00;
+
+ //training for each Dimm/CS
+ for (ChipSel = 0; ChipSel < NBPtr->CsPerChannel; ChipSel = ChipSel + NBPtr->CsPerDelay) {
+ if ((DCTPtr->Timings.CsEnabled & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSel)) != 0) {
+ if (!(NBPtr->MCTPtr->Status[SbLrdimms]) || ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0)) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+ MemTWLPerDimmHw3 (TechPtr, (ChipSel / NBPtr->CsPerDelay), Pass);
+ }
+ }
+ }
+
+ NBPtr->FamilySpecificHook[CalcWrDqDqsEarly] (NBPtr, NULL);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "End write leveling\n\n");
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initializes per DIMM write levelization
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Dimm - DIMM to be trained
+ * @param[in] Pass - Pass number (1 (400Mhz) or 2 (>400Mhz))
+ *
+ */
+
+VOID
+STATIC
+MemTWLPerDimmHw3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Dimm,
+ IN UINT8 Pass
+ )
+{
+ MEM_DATA_STRUCT *MemPtr;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+
+ ASSERT (Dimm < (NBPtr->CsPerChannel / NBPtr->CsPerDelay));
+
+ // 1. A. Specify the target Dimm that is to be trained by programming
+ // F2x[1, 0]9C_x08[TrDimmSel].
+ NBPtr->SetBitField (NBPtr, BFTrDimmSel, Dimm);
+
+ TechPtr->TargetDIMM = Dimm;
+ NBPtr->FamilySpecificHook[InitPerNibbleTrn] (NBPtr, NULL);
+ for (TechPtr->TrnNibble = NIBBLE_0; TechPtr->TrnNibble <= (NBPtr->FamilySpecificHook[TrainWlPerNibble] (NBPtr, &Dimm)? NIBBLE_0 : NIBBLE_1); TechPtr->TrnNibble++) {
+ // 2. Prepare the DIMMs for write levelization using DDR3-defined
+ // MR commands.
+ MemTPrepareDIMMs3 (TechPtr, Dimm, TRUE);
+
+ // 3. After the DIMMs are configured, BIOS waits 40 MEMCLKs to
+ // satisfy DDR3-defined internal DRAM timing.
+ NBPtr->WaitXMemClks (NBPtr, 40);
+
+ // 4. Configure the processor's DDR phy for write levelization training:
+ MemTProcConfig3 (TechPtr, Dimm, Pass);
+
+ // 5. Begin write levelization training
+ MemTBeginWLTrain3 (TechPtr, Dimm);
+ }
+ // 7. Program the target Dimm back to normal operation
+ MemTPrepareDIMMs3 (TechPtr, Dimm, FALSE);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function prepares the DIMMS for Write Levelization
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] TargetDIMM - DIMM to be trained
+ * @param[in] Wl - Indicates if WL mode should be enabled
+ *
+ */
+
+VOID
+STATIC
+MemTPrepareDIMMs3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 TargetDIMM,
+ IN BOOLEAN Wl
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ UINT8 ChipSel;
+
+ NBPtr = TechPtr->NBPtr;
+
+ AGESA_TESTPOINT (TpProcMemWlPrepDimms, &(NBPtr->MemPtr->StdHeader));
+ ASSERT (TargetDIMM < (NBPtr->CsPerChannel / NBPtr->CsPerDelay));
+ TechPtr->TargetDIMM = TargetDIMM;
+ if (!(TechPtr->TechnologySpecificHook[WlTrainingPrepareLrdimm] (TechPtr, &Wl))) {
+ for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+ if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) {
+ NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+ // Set MR1 to F2x7C[MrsAddress], F2x7C[MrsBank]=1
+ MemTEMRS13 (TechPtr, Wl, TargetDIMM);
+ NBPtr->SendMrsCmd (NBPtr);
+ // Set MR2 to F2x7C[MrsAddress], F2x7C[MrsBank]=1
+ MemTEMRS23 (TechPtr);
+ // Send command
+ NBPtr->SendMrsCmd (NBPtr);
+ }
+ }
+ if (Wl) {
+ // Program WrLvOdt for the Target DIMM (or CS)
+ NBPtr->SetBitField (NBPtr, BFWrLvOdt, NBPtr->ChannelPtr->PhyWLODT[TargetDIMM]);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs seed values for Write Levelization
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Dimm - DIMM to be trained
+ * @param[in] Pass - Pass for WL training (1 - 400Mhz or 2 - >400Mhz)
+ *
+ */
+
+VOID
+STATIC
+MemTProcConfig3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Dimm,
+ IN UINT8 Pass
+ )
+{
+ DIE_STRUCT *MCTPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+ MEM_NB_BLOCK *NBPtr;
+ UINT16 WrDqsDly;
+ // Memclk Delay incurred by register.
+ UINT8 MemClkRegDly;
+ UINT8 ByteLane;
+ UINT8 DefaultSeed;
+ UINT8 CurrentSeed;
+ UINT8 *Seed;
+ UINT8 RCW2;
+ UINT16 Speed;
+ INT16 WrDqsBias;
+
+ NBPtr = TechPtr->NBPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+ AGESA_TESTPOINT (TpProcMemWlConfigDimms, &(NBPtr->MemPtr->StdHeader));
+ RCW2 = ChannelPtr->CtrlWrd02[Dimm];
+ Speed = TechPtr->NBPtr->DCTPtr->Timings.Speed;
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Byte: 00 01 02 03 04 05 06 07 ECC\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSeeds: ");
+ // Program an initialization Value to registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52 to set
+ // the gross and fine delay for all the byte lane fields. If the target frequency is different than 400MHz,
+ // BIOS must execute two training passes for each Dimm. For pass 1 at a 400MHz MEMCLK frequency,
+ // use an initial total delay value.
+ if (Pass == 1) {
+ //
+ // Get the default value of seed
+ //
+ if (MCTPtr->Status[SbRegistered]) {
+ //
+ // RDIMM
+ //
+ if (Speed == DDR667_FREQUENCY) {
+ DefaultSeed = ((RCW2 & BIT0) == 0) ? 0x3B : 0x4B;
+ } else {
+ DefaultSeed = ((RCW2 & BIT0) == 0) ? 0x41 : 0x51;
+ }
+ } else if (ChannelPtr->SODimmPresent != 0) {
+ //
+ // SODIMMM
+ //
+ DefaultSeed = 0x12;
+ } else if (MCTPtr->Status[SbLrdimms]) {
+ //
+ // LRDIMM
+ //
+ DefaultSeed = 0xF7;
+ } else {
+ //
+ // UDIMMM
+ //
+ DefaultSeed = 0x1A;
+ }
+
+ NBPtr->FamilySpecificHook[OverrideWLSeed] (NBPtr, &DefaultSeed);
+ ASSERT (Speed >= DDR667_FREQUENCY);
+
+ // Get platform override seed
+ Seed = (UINT8 *) FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_WL_SEED, MCTPtr->SocketId, ChannelPtr->ChannelID, Dimm,
+ &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+ for (ByteLane = 0; ByteLane < TechPtr->DlyTableWidth (); ByteLane++) {
+ // This includes ECC as byte 8
+ CurrentSeed = ((Seed != NULL) ? Seed[ByteLane] : DefaultSeed);
+ ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + ByteLane] = CurrentSeed;
+
+ if (NBPtr->IsSupported[WLSeedAdjust]) {
+ if ((CurrentSeed & 0x20) != 0) {
+ // If (SeedGross is odd) then SeedPreGross = 1
+ CurrentSeed = (CurrentSeed & 0x1F) | 0x20;
+ } else {
+ // If (SeedGross is even) then SeedPreGross = 2
+ CurrentSeed = (CurrentSeed & 0x1F) | 0x40;
+ }
+ }
+
+ NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), CurrentSeed);
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", CurrentSeed);
+ }
+ } else {
+ //10.Multiply the previously saved delay values in Pass 1, step #5 by (target frequency)/400 to find
+ //the gross and fine delay initialization values at the target frequency. Use these values as the initial
+ //seed values when executing Pass 2, step #4.
+ for (ByteLane = 0; ByteLane < TechPtr->DlyTableWidth (); ByteLane++) {
+ // This includes ECC as byte 8
+ WrDqsDly = ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + ByteLane];
+ TechPtr->Bytelane = ByteLane;
+ NBPtr->FamilySpecificHook[TrainWlPerNibbleSeed] (NBPtr, &WrDqsDly);
+
+ if (MCTPtr->Status[SbRegistered]) {
+ //
+ // For Registered Dimms
+ //
+ MemClkRegDly = ((RCW2 & BIT0) == 0) ? 0x20 : 0x30;
+ } else {
+ //
+ // Unbuffered Dimms and LRDIMMs
+ //
+ MemClkRegDly = 0;
+ }
+ //
+ // Recover any adjustmen to delay for WrDqDqsEarly
+ //
+ WrDqsBias = 0;
+ NBPtr->FamilySpecificHook[AdjustWrDqsBeforeSeedScaling] (NBPtr, &WrDqsBias);
+
+ // Scale WrDqsDly to the next speed
+ WrDqsDly = (UINT16) (MemClkRegDly + ((((INT32) WrDqsDly - MemClkRegDly - WrDqsBias) * Speed) / TechPtr->PrevSpeed));
+
+ ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + ByteLane] = (UINT8) WrDqsDly;
+
+ if (NBPtr->IsSupported[WLSeedAdjust]) {
+ if ((WrDqsDly & 0x20) != 0) {
+ // If (SeedGross is odd) then SeedPreGross = 1
+ WrDqsDly = (WrDqsDly & 0x1F) | 0x20;
+ } else {
+ // If (SeedGross is even) then SeedPreGross = 2
+ WrDqsDly = (WrDqsDly & 0x1F) | 0x40;
+ }
+ }
+ NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqsDly);
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", WrDqsDly);
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function begins WL training for a specific DIMM
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Dimm - DIMM to be trained
+ *
+ */
+
+VOID
+STATIC
+MemTBeginWLTrain3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Dimm
+ )
+{
+ MEM_DATA_STRUCT *MemPtr;
+ DIE_STRUCT *MCTPtr;
+ MEM_NB_BLOCK *NBPtr;
+ UINT8 ByteLane;
+ UINT8 Seed;
+ UINT8 Delay;
+ INT16 Delay16;
+
+ NBPtr = TechPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+ MCTPtr = NBPtr->MCTPtr;
+
+ AGESA_TESTPOINT (TpProcMemWlTrainTargetDimm, &(MemPtr->StdHeader));
+ // Assert ODT pins for write leveling
+ NBPtr->SetBitField (NBPtr, BFWrLvOdtEn, 1);
+
+ // Wait 10 MEMCLKs to allow for ODT signal settling.
+ NBPtr->WaitXMemClks (NBPtr, 10);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrtLvTrEn = 1\n");
+ // Program F2x[1, 0]9C_x08[WrtLlTrEn]=1.
+ NBPtr->SetBitField (NBPtr, BFWrtLvTrEn, 1);
+
+ // Wait 200 MEMCLKs.
+ NBPtr->WaitXMemClks (NBPtr, 200);
+
+ // Program F2x[1, 0]9C_x08[WrtLlTrEn]=0.
+ NBPtr->SetBitField (NBPtr, BFWrtLvTrEn, 0);
+
+ // Read from registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52 to get the gross and fine Delay settings
+ // for the target Dimm and save these values.
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t PRE: ");
+ for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ // This includes ECC as byte 8
+ Seed = NBPtr->ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ()) + ByteLane];
+ Delay = (UINT8)NBPtr->GetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane));
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", Delay);
+
+ TechPtr->Bytelane = ByteLane;
+ TechPtr->TargetDIMM = Dimm;
+ NBPtr->FamilySpecificHook[TrainWlPerNibbleAdjustWLDly] (NBPtr, &Delay);
+
+ if (NBPtr->IsSupported[WLSeedAdjust]) {
+ // Recover WrDqsGrossDly:
+ // WrDqsGrossDly = SeedGross + PhRecGrossDlyByte - SeedPreGross
+ if ((Seed & 0x20) != 0) {
+ // If (SeedGross is odd) then SeedPreGross = 1
+ if ((NBPtr->IsSupported[WLNegativeDelay]) && ((Seed & 0x80) != 0)) {
+ // If the seed was negative, save the most negative delay in WLCriticalDelay
+ TechPtr->WLCriticalDelay = MIN (TechPtr->WLCriticalDelay, (INT16)Delay - 0x40);
+ Delay -= 0x40;
+ } else {
+ Delay += (Seed & 0xE0) - 0x20;
+ }
+ } else {
+ // If (SeedGross is even) then SeedPreGross = 2
+ if (((Seed & 0xE0) == 0) && (Delay < 0x40)) {
+ // If SeedGross is 0 and PhRecGrossDlyByte is less than SeedPreGross,
+ // we have a negative result and need to program the delay to 0
+ if (NBPtr->IsSupported[WLNegativeDelay]) {
+ //
+ // Save the lowest negative delay value across all Dimms and Bytelanes
+ //
+ TechPtr->WLCriticalDelay = MIN (TechPtr->WLCriticalDelay, (INT16)Delay - 0x40);
+ Delay -= 0x40;
+ } else {
+ Delay = 0;
+ }
+ } else {
+ if (NBPtr->GetBitField (NBPtr, BFWrDqDqsEarly) != 0) {
+ Delay = Delay + (Seed & 0xE0);
+ Delay16 = Delay - 0x40;
+ Delay = (UINT8)Delay16;
+ TechPtr->WLCriticalDelay = MIN (TechPtr->WLCriticalDelay, Delay16);
+ } else {
+ Delay += (Seed & 0xE0) - 0x40;
+ }
+ }
+ }
+ } else if (((Seed >> 5) == 0) && ((Delay >> 5) == 3)) {
+ IDS_OPTION_HOOK (IDS_CHECK_NEGATIVE_WL, &Delay, &(TechPtr->NBPtr->MemPtr->StdHeader));
+ // If seed has gross delay of 0 and PRE has gross delay of 3,
+ // then round the total delay of TxDqs to 0.
+ Delay = 0;
+ }
+
+ if ((!NBPtr->IsSupported[WLNegativeDelay]) && ((Delay > (Seed + 0x20)) || (Seed > (Delay + 0x20)))) {
+ //
+ // If PRE comes back with more than Seed +/- 0x20, then this is an
+ // unexpected condition. Log the condition.
+ //
+ PutEventLog (AGESA_ERROR, MEM_ERROR_WL_PRE_OUT_OF_RANGE, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, ((Seed << 8) + Delay), &NBPtr->MemPtr->StdHeader);
+ }
+ NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), Delay);
+ NBPtr->ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ()) + ByteLane] = Delay;
+ }
+
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tWrDqs: ");
+ for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", NBPtr->ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ()) + ByteLane]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+ );
+
+ // Disable write leveling ODT pins
+ NBPtr->SetBitField (NBPtr, BFWrLvOdtEn, 0);
+
+ // Wait 10 MEMCLKs to allow for ODT signal settling.
+ NBPtr->WaitXMemClks (NBPtr, 10);
+
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs register after Phy assisted training is finish.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTExitPhyAssistedTrainingClient3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ UINT8 Dct;
+ UINT8 ChipSel;
+ NBPtr = TechPtr->NBPtr;
+
+ NBPtr->FamilySpecificHook[ReEnablePhyComp] (NBPtr, NBPtr);
+ NBPtr->BrdcstSet (NBPtr, BFRxPtrInitReq, 1);
+ NBPtr->PollBitField (NBPtr, BFRxPtrInitReq, 0, PCI_ACCESS_TIMEOUT, TRUE);
+ NBPtr->BrdcstSet (NBPtr, BFDisDllShutdownSR, 1);
+ NBPtr->BrdcstSet (NBPtr, BFEnterSelfRef, 1);
+ NBPtr->PollBitField (NBPtr, BFEnterSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClkAlign = 2\n");
+ NBPtr->BrdcstSet (NBPtr, BFDbeGskMemClkAlignMode, 2);
+ NBPtr->BrdcstSet (NBPtr, BFExitSelfRef, 1);
+ NBPtr->PollBitField (NBPtr, BFExitSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+ if (NBPtr->IsSupported[SetDllShutDown]) {
+ NBPtr->BrdcstSet (NBPtr, BFDisDllShutdownSR, 0);
+ }
+
+ // Calculate Max Latency for both channels to prepare for position training
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ if (TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &ChipSel)) {
+ NBPtr->SetMaxLatency (NBPtr, TechPtr->MaxDlyForMaxRdLat);
+ }
+ }
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mt.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mt.c
new file mode 100644
index 0000000..45e00d3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mt.c
@@ -0,0 +1,262 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mt.c
+ *
+ * Common Technology file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MT_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemTDefaultTechnologyHook (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT VOID *OptParam
+ );
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function is the default return for non-training technology features
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ */
+BOOLEAN
+MemTFeatDef (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the TestFail bit for all CS that fail training.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ */
+VOID
+MemTMarkTrainFail (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ UINT8 Dct;
+ UINT8 ChipSel;
+
+ NBPtr = TechPtr->NBPtr;
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct ++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ NBPtr->DCTPtr->Timings.CsEnabled &= ~NBPtr->DCTPtr->Timings.CsTrainFail;
+ for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel ++) {
+ if ((NBPtr->DCTPtr->Timings.CsTrainFail & ((UINT16)1 << ChipSel)) != 0) {
+ NBPtr->SetBitField (NBPtr, (BFCSBaseAddr0Reg + ChipSel), (UINT32)1 << BFTestFail);
+ }
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the initial controller environment before training.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTBeginTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ S_UINT64 SMsr;
+ MEM_DATA_STRUCT *MemPtr;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+
+ LibAmdReadCpuReg (CR4_REG, &TechPtr->CR4reg);
+ LibAmdWriteCpuReg (CR4_REG, TechPtr->CR4reg | ((UINT32)1 << 9)); // enable SSE2
+
+ LibAmdMsrRead (HWCR, (UINT64 *) (&SMsr), &MemPtr->StdHeader); // HWCR
+ TechPtr->HwcrLo = SMsr.lo;
+ SMsr.lo |= 0x00020000; // turn on HWCR.wrap32dis
+ SMsr.lo &= 0xFFFF7FFF; // turn off HWCR.SSEDIS
+ LibAmdMsrWrite (HWCR, (UINT64 *) (&SMsr), &MemPtr->StdHeader);
+
+ TechPtr->DramEcc = (UINT8) NBPtr->GetBitField (NBPtr, BFDramEccEn);
+ NBPtr->SetBitField (NBPtr, BFDramEccEn, 0); // Disable ECC
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the final controller environment after training.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTEndTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ S_UINT64 SMsr;
+ MEM_DATA_STRUCT *MemPtr;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+
+ LibAmdWriteCpuReg (CR4_REG, TechPtr->CR4reg);
+
+ LibAmdMsrRead (HWCR, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+ SMsr.lo = TechPtr->HwcrLo;
+ LibAmdMsrWrite (HWCR, (UINT64 *)&SMsr, &MemPtr->StdHeader);
+
+ NBPtr->SetBitField (NBPtr, BFDramEccEn, TechPtr->DramEcc);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets all the bytelanes/nibbles to the same delay value
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Dly - Delay value to set
+ *
+ */
+
+VOID
+MemTSetDQSDelayAllCSR (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Dly
+ )
+{
+ UINT8 i;
+ UINT8 MaxBytelanes;
+ MaxBytelanes = (TechPtr->NBPtr->MCTPtr->Status[SbEccDimms] && TechPtr->NBPtr->IsSupported[EccByteTraining]) ? 9 : 8;
+
+ for (i = 0; i < MaxBytelanes; i++) {
+ TechPtr->SetDQSDelayCSR (TechPtr, i, Dly);
+ }
+ TechPtr->NBPtr->FamilySpecificHook[RegAccessFence] (TechPtr->NBPtr, NULL);
+}
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function is used to intialize common technology functions
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemTCommonTechInit (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 i;
+ for (i = 0; i < NumberOfTechHooks; i++) {
+ TechPtr->TechnologySpecificHook[i] = MemTDefaultTechnologyHook;
+ }
+}
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function is an empty function used to intialize TechnologySpecificHook array
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_NB_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return FALSE - always
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemTDefaultTechnologyHook (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ return FALSE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mthdi.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mthdi.c
new file mode 100644
index 0000000..3831b16
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mthdi.c
@@ -0,0 +1,124 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mthdi.c
+ *
+ * Common technology hardware dram init support functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MTHDI_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initiates Hardware based dram initialization for both DCTs
+ * at the same time.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTDramInitHw (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 Dct;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+
+ NBPtr->BrdcstSet (NBPtr, BFInitDram, 1);
+ // Phy fence training
+ AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader));
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ NBPtr->PhyFenceTraining (NBPtr);
+ }
+ }
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttEdgeDetect.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttEdgeDetect.c
new file mode 100644
index 0000000..01e63f8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttEdgeDetect.c
@@ -0,0 +1,906 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttEdgeDetect.c
+ *
+ * DQS R/W position training utilizing Data Eye Edge Detection for optimization
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "AdvancedApi.h"
+#include "GeneralServices.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mport.h"
+#include "mttEdgeDetect.h"
+#include "OptionMemory.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MTTEDGEDETECT_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#define LAST_DELAY (-128)
+#define INC_DELAY 1
+#define DEC_DELAY 0
+
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Sweep Table For Byte Training without insertion delay
+ *
+*/
+DQS_POS_SWEEP_TABLE SweepTableByte[] =
+{
+ // Begin End Inc/Dec Step EndResult Edge
+ { 0x00, 0x1F, INC_DELAY, 4, 0xFFFF, LEFT_EDGE}, /// For Left Edge, start from 0 and Increment to 0x1F by 4 until all PASS
+ { LAST_DELAY, 0x00, DEC_DELAY, -1, 0xFE00, LEFT_EDGE}, /// Then go back down to 0x00 by 1 until all FAIL
+ { 0x1F, 0x00, DEC_DELAY, -4, 0xFFFF, RIGHT_EDGE}, /// For Right Edge, start from 0x1F down to 0 until all PASS.
+ { LAST_DELAY, 0x1F, INC_DELAY, 1, 0xFE00, RIGHT_EDGE} /// Then go back up by 1 until all FAIL.
+};
+/**
+ * Sweep Table For Byte Training with insertion delay
+ *
+*/
+DQS_POS_SWEEP_TABLE InsSweepTableByte[] =
+{
+ // Begin End Inc/Dec Step EndResult Edge
+ { 0x00, -0x20, DEC_DELAY, -4, 0xFE00, LEFT_EDGE}, /// For Left Edge, start from 0 and Decrement to -0x20 by -4 until all FAIL
+ { LAST_DELAY, 0x1F, INC_DELAY, 1, 0xFFFF, LEFT_EDGE}, /// Then go back up to 0x1F by 1 until all PASS
+ { 0x1F, 0x00, DEC_DELAY, -4, 0xFFFF, RIGHT_EDGE}, /// For Right Edge, start from 0x1F down to 0 until all PASS.
+ { LAST_DELAY, 0x1F, INC_DELAY, 1, 0xFE00, RIGHT_EDGE} /// Then go back up by 1 until all FAIL.
+};
+
+BOOLEAN
+STATIC
+MemTTrainDQSRdWrEdgeDetect (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+STATIC
+MemTInitTestPatternAddress (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT SWEEP_INFO *SweepPtr
+ );
+
+BOOLEAN
+STATIC
+MemTContinueSweep (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT SWEEP_INFO *SweepPtr
+ );
+
+BOOLEAN
+STATIC
+MemTSetNextDelay (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT SWEEP_INFO *SweepPtr
+ );
+
+UINT8
+STATIC
+MemTScaleDelayVal (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN INT8 Delay
+ );
+
+BOOLEAN
+STATIC
+MemTDataEyeSave (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT SWEEP_INFO *SweepPtr,
+ IN UINT8 ByteLane
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_FEAT_TRAIN_SEQ memTrainSequenceDDR3[];
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes DQS position training for all a Memory channel using
+ * the Edge Detection algorithm.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+BOOLEAN
+MemTTrainDQSEdgeDetectSw (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ BOOLEAN Status;
+
+ Status = FALSE;
+ NBPtr = TechPtr->NBPtr;
+ TechPtr->TrainingType = TRN_DQS_POSITION;
+ //
+ // Initialize the Pattern
+ //
+ if (AGESA_SUCCESS == NBPtr->TrainingPatternInit (NBPtr)) {
+ //
+ // Setup hardware training engine (if applicable)
+ //
+ NBPtr->FamilySpecificHook[SetupHwTrainingEngine] (NBPtr, &TechPtr->TrainingType);
+ //
+ // Start Edge Detection
+ //
+ Status |= MemTTrainDQSRdWrEdgeDetect (TechPtr);
+ //
+ // Finalize the Pattern
+ //
+ Status &= (AGESA_SUCCESS == NBPtr->TrainingPatternFinalize (NBPtr));
+ }
+ return Status;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This Executes Read DQS and Write Data Position training on a chip select pair
+ * using the Edge Detection algorithm.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No Errors occurred
+ * @return FALSE - Errors occurred
+
+ */
+
+BOOLEAN
+STATIC
+MemTTrainDQSRdWrEdgeDetect (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ MEM_DATA_STRUCT *MemPtr;
+ MEM_NB_BLOCK *NBPtr;
+ UINT8 WrDqDelay;
+ UINT8 Dct;
+ UINT8 ChipSel;
+ UINT8 i;
+ BOOLEAN Status;
+ UINT8 TimesFail;
+ UINT8 TimesRetrain;
+
+ NBPtr = TechPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+ TimesRetrain = DEFAULT_TRAINING_TIMES;
+ IDS_OPTION_HOOK (IDS_MEM_RETRAIN_TIMES, &TimesRetrain, &MemPtr->StdHeader);
+ //
+ // Set environment settings before training
+ //
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Read/Write Data Eye Edge Detection.\n");
+ MemTBeginTraining (TechPtr);
+ //
+ // Do Rd DQS /Wr Data Position training for all Dcts/Chipselects
+ //
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ //
+ // Chip Select Loop
+ //
+ TechPtr->RestartChipSel = -1;
+ for (ChipSel = 0; ChipSel < NBPtr->CsPerChannel; ChipSel = ChipSel + NBPtr->CsPerDelay ) {
+ //
+ // Init Bit Error Masks
+ //
+ LibAmdMemFill (&NBPtr->ChannelPtr->FailingBitMask[ (ChipSel * MAX_BYTELANES_PER_CHANNEL) ],
+ 0xFF,
+ (MAX_BYTELANES_PER_CHANNEL * NBPtr->CsPerDelay),
+ &MemPtr->StdHeader);
+ if ( (NBPtr->MCTPtr->Status[SbLrdimms]) ? ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0) :
+ ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) != 0) ) {
+
+ TechPtr->ChipSel = ChipSel;
+ IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tIncrease WrDat, Train RdDqs:\n");
+
+ TechPtr->DqsRdWrPosSaved = 0;
+ //
+ // Use a list of Approximate Write Data delay values and train Read DQS Position for
+ // each until a valid Data eye is found.
+ //
+ Status = FALSE;
+ TimesFail = 0;
+ NBPtr->FamilySpecificHook[InitializeRxEnSeedlessTraining] (NBPtr, NBPtr);
+ ERROR_HANDLE_RETRAIN_BEGIN (TimesFail, TimesRetrain) {
+ i = 0;
+ while (NBPtr->GetApproximateWriteDatDelay (NBPtr, i, &WrDqDelay)) {
+ TechPtr->SmallDqsPosWindow = FALSE;
+ //
+ // Set Write Delay approximation
+ //
+ TechPtr->Direction = DQS_WRITE_DIR;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tWrite Delay: %02x", WrDqDelay);
+ MemTSetDQSDelayAllCSR (TechPtr, WrDqDelay);
+ //
+ // Attempt Read Training
+ //
+ TechPtr->Direction = DQS_READ_DIR;
+ Status = memTrainSequenceDDR3[NBPtr->TrainingSequenceIndex].MemTechFeatBlock->RdPosTraining (TechPtr);
+ if (Status) {
+ //
+ // If Read DQS Training was successful, Train Write Data (DQ) Position
+ //
+ TechPtr->DqsRdWrPosSaved = 0;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tTrain WrDat:\n\n");
+ TechPtr->Direction = DQS_WRITE_DIR;
+ if (NBPtr->FamilySpecificHook[BeforeWrDatTrn] (NBPtr, &ChipSel)) {
+ Status = MemTTrainDQSEdgeDetect (TechPtr);
+ }
+ break;
+ }
+ i++;
+ }
+ ERROR_HANDLE_RETRAIN_END ((Status == FALSE), TimesFail)
+ }
+
+ //
+ // If we went through the table, Fail.
+ //
+ if (Status == FALSE) {
+ // On training failure, check and record whether training fails due to small window or no window
+ if (TechPtr->SmallDqsPosWindow) {
+ NBPtr->MCTPtr->ErrStatus[EsbSmallDqs] = TRUE;
+ } else {
+ NBPtr->MCTPtr->ErrStatus[EsbNoDqsPos] = TRUE;
+ }
+
+ SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+ if (TechPtr->Direction == DQS_READ_DIR) {
+ PutEventLog (AGESA_ERROR, MEM_ERROR_NO_DQS_POS_RD_WINDOW, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ } else {
+ PutEventLog (AGESA_ERROR, MEM_ERROR_NO_DQS_POS_WR_WINDOW, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ }
+ NBPtr->DCTPtr->Timings.CsTrainFail |= (UINT16)1 << ChipSel;
+ // If the even chip select failed training always fail the odd, if present.
+ if (((ChipSel & 0x01) == 0) && (NBPtr->CsPerDelay == 2)) {
+ if (NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << (ChipSel + 1))) {
+ NBPtr->DCTPtr->Timings.CsTrainFail |= (UINT16)1 << (ChipSel + 1);
+ }
+ }
+ if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, NBPtr->DCTPtr->Timings.CsTrainFail, &NBPtr->MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ }
+ }
+ } else {
+ //
+ // Clear Bit Error Masks if these CS will not be trained.
+ //
+ LibAmdMemFill (&NBPtr->ChannelPtr->FailingBitMask[ (ChipSel * MAX_BYTELANES_PER_CHANNEL) ],
+ 0x00,
+ (MAX_BYTELANES_PER_CHANNEL * NBPtr->CsPerDelay),
+ &NBPtr->MemPtr->StdHeader);
+ }
+ }
+ }
+ //
+ // Restore environment settings after training
+ //
+ MemTEndTraining (TechPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "End Read/Write Data Eye Edge Detection\n\n");
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes DQS position training for both read and write, using
+ * the Edge Detection Algorithm. This method searches for the beginning and end
+ * of the Data Eye with out scanning every DSQ delay value. The following is a
+ * detailed description of the algorithm:
+ *
+ * Four-Stage Data Eye Sweep
+ *
+ * -Search starts at Delay value of 0.
+ * -Search left in steps of 4/32UI looking for all Byte lanes Passing. Left from zero rolls over to a negative value.
+ * -Negative values are translated to the high end of the delay range, but using Insertion delay comparison.
+ * -For each passing byte lane, freeze delay at first passing value, but set mask so next steps will not compare for byte lanes that previously passed
+ * -Switch to search right in steps of 1/32UI looking for fail.
+ * -For each lane, starting delay for 1/32 sweep right is first passing delay from 4/32 sweep left.
+ * -For each failing byte lane, freeze delay at first failing value, but set mask so next steps will not compare for byte lanes that previously failed
+ * -Search right until all byte lanes have failed
+ * -For each lane, right edge used by BIOS will be first failing delay value minus 1/32
+
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - All bytelanes pass
+ * @return FALSE - Some bytelanes fail
+*/
+BOOLEAN
+MemTTrainDQSEdgeDetect (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ DIE_STRUCT *MCTPtr;
+ DQS_POS_SWEEP_TABLE *SweepTablePtr;
+ UINT8 SweepTableSize;
+ SWEEP_INFO SweepData;
+ BOOLEAN Status;
+ UINT16 CurrentResult;
+ UINT16 AlignedResult;
+ UINT16 OffsetResult;
+ UINT8 StageIndex;
+ UINT8 CsIndex;
+ UINT8 i;
+
+ Status = TRUE;
+ //
+ // Initialize Object Pointers
+ //
+ NBPtr = TechPtr->NBPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ //
+ // Initialize stack variables
+ //
+ LibAmdMemFill (&SweepData, 0, sizeof (SWEEP_INFO), &NBPtr->MemPtr->StdHeader);
+ //
+ /// Get Pointer to Sweep Table
+ //
+ if (TechPtr->Direction == DQS_READ_DIR) {
+ SweepTablePtr = InsSweepTableByte;
+ SweepTableSize = GET_SIZE_OF (InsSweepTableByte);
+ } else {
+ SweepTablePtr = SweepTableByte;
+ SweepTableSize = GET_SIZE_OF (SweepTableByte);
+ }
+
+ //
+ /// Set up the test Pattern, exit if no Memory
+ //
+ if (MemTInitTestPatternAddress (TechPtr, &SweepData) == FALSE) {
+ LibAmdMemFill (&NBPtr->ChannelPtr->FailingBitMask[ (TechPtr->ChipSel * MAX_BYTELANES_PER_CHANNEL) ],
+ 0,
+ (MAX_BYTELANES_PER_CHANNEL * NBPtr->CsPerDelay),
+ &NBPtr->MemPtr->StdHeader);
+ return FALSE;
+ }
+ //
+ // Clear Error Flag
+ //
+ SweepData.Error = FALSE;
+ NBPtr->FamilySpecificHook[InitialzeRxEnSeedlessByteLaneError] (NBPtr, NBPtr);
+ //
+ /// Process Sweep table, using entries from the table to determine Starting and Ending Delays
+ /// as well as the Step size and criteria for evaluating whether the correct result is found.
+ ///
+ /// Delay values at this level are an abstract range of values which gets scaled to the actual value
+ /// before it is written to the hardware. This allows NB specific code to handle the scaling as a
+ /// function of frequency or other conditions.
+ //
+ for (StageIndex = 0; (StageIndex < SweepTableSize) && (SweepData.Error == FALSE); StageIndex++) {
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSTAGE: %d\t", StageIndex);
+ //
+ /// Initialize SweepData variables
+ //
+ SweepData.BeginDelay = SweepTablePtr->BeginDelay;
+ SweepData.EndDelay = SweepTablePtr->EndDelay;
+ SweepData.Step = 0; /// Step Value will be 0 to start.
+ SweepData.EndResult = SweepTablePtr->EndResult;
+ if (!(MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining])) {
+ SweepData.EndResult |= 0x0100;
+ }
+ SweepData.Edge = SweepTablePtr->MinMax;
+ SweepData.InsertionDelayMsk = 0;
+ SweepData.ResultFound = 0x0000;
+ //
+ // Set Training Delays Pointer.
+ //
+ if (TechPtr->Direction == DQS_READ_DIR) {
+ SweepData.TrnDelays = (INT8 *) ((SweepData.Edge == RIGHT_EDGE) ? NBPtr->ChannelPtr->RdDqsMaxDlys : NBPtr->ChannelPtr->RdDqsMinDlys);
+ } else {
+ SweepData.TrnDelays = (INT8 *) ((SweepData.Edge == RIGHT_EDGE) ? NBPtr->ChannelPtr->WrDatMaxDlys : NBPtr->ChannelPtr->WrDatMinDlys);
+ };
+ //
+ /// Set initial TrnDelay Values if necessary
+ //
+ IDS_HDT_CONSOLE (MEM_FLOW, "Sweeping %s DQS, %s from ", (TechPtr->Direction == DQS_READ_DIR) ?"Read":"Write", (SweepTablePtr->ScanDir == INC_DELAY) ? "incrementing":"decrementing");
+ if (SweepData.BeginDelay != LAST_DELAY) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x", (UINT16) MemTScaleDelayVal (TechPtr, SweepData.BeginDelay));
+ for (i = 0; i < ((MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8); i++) {
+ SweepData.TrnDelays[i] = SweepData.BeginDelay;
+ }
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, "Current Delay");
+ SweepData.Step = SweepTablePtr->Step;
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, " by %02x, until all bytelanes %s.\n\n", (UINT16) MemTScaleDelayVal (TechPtr, ABS (SweepTablePtr->Step)), (SweepData.EndResult == 0xFFFF)?"PASS":"FAIL");
+
+ //-------------------------------------------------------------------
+ // Sweep DQS Delays
+ // MemTContinueSweep function returns false to break out of loop.
+ // There are no other breaks out of this loop.
+ //-------------------------------------------------------------------
+ while (MemTContinueSweep (TechPtr, &SweepData)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tByte Lane : 08 07 06 05 04 03 02 01 00\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tDQS Delays : %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[8]),
+ (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[7]), (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[6]),
+ (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[5]), (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[4]),
+ (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[3]), (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[2]),
+ (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[1]), (UINT16) MemTScaleDelayVal (TechPtr, SweepData.TrnDelays[0])
+ );
+ //
+ /// Set Step Value
+ //
+ SweepData.Step = SweepTablePtr->Step;
+ CurrentResult = 0xFFFF;
+ //
+ /// Chip Select Loop: Test the Pattern for all populated CS that are controlled by the current delay registers
+ //
+ for (CsIndex = 0; CsIndex < NBPtr->CsPerDelay ; CsIndex++, TechPtr->ChipSel++) {
+ ASSERT (CsIndex < MAX_CS_PER_CHANNEL);
+ ASSERT (TechPtr->ChipSel < MAX_CS_PER_CHANNEL);
+ if (SweepData.CsAddrValid[CsIndex] == TRUE) {
+ //
+ /// If this is a Write Dqs sweep, Write the pattern now.
+ //
+ if (TechPtr->Direction == DQS_WRITE_DIR) {
+ NBPtr->WritePattern (NBPtr, SweepData.TestAddrRJ16[CsIndex], TechPtr->PatternBufPtr, TechPtr->PatternLength);
+ }
+ //
+ /// Read the Pattern Back
+ //
+ NBPtr->ReadPattern (NBPtr, TechPtr->TestBufPtr, SweepData.TestAddrRJ16[CsIndex], TechPtr->PatternLength);
+ //
+ /// Compare the Pattern and Merge the results using InsertionDelayMsk
+ //
+ AlignedResult = NBPtr->CompareTestPattern (NBPtr, TechPtr->TestBufPtr, TechPtr->PatternBufPtr, TechPtr->PatternLength * 64);
+ CurrentResult &= AlignedResult | SweepData.InsertionDelayMsk;
+ if (SweepData.InsertionDelayMsk != 0) {
+ OffsetResult = NBPtr->InsDlyCompareTestPattern (NBPtr, TechPtr->TestBufPtr, TechPtr->PatternBufPtr, TechPtr->PatternLength * 64);
+ CurrentResult &= (OffsetResult | (~SweepData.InsertionDelayMsk));
+ }
+ //
+ /// Flush the Test Pattern
+ //
+ NBPtr->FlushPattern (NBPtr, SweepData.TestAddrRJ16[CsIndex], TechPtr->PatternLength);
+ NBPtr->FamilySpecificHook[ResetRxFifoPtr] (NBPtr, NBPtr);
+ }
+ } /// End Chip Select Loop
+ TechPtr->ChipSel = TechPtr->ChipSel - CsIndex;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tResult : %c %c %c %c %c %c %c %c %c \n",
+ (SweepData.ResultFound & ((UINT16) 1 << (8))) ? ' ':(CurrentResult & ((UINT16) 1 << (8))) ? 'P':'.',
+ (SweepData.ResultFound & ((UINT16) 1 << (7))) ? ' ':(CurrentResult & ((UINT16) 1 << (7))) ? 'P':'.',
+ (SweepData.ResultFound & ((UINT16) 1 << (6))) ? ' ':(CurrentResult & ((UINT16) 1 << (6))) ? 'P':'.',
+ (SweepData.ResultFound & ((UINT16) 1 << (5))) ? ' ':(CurrentResult & ((UINT16) 1 << (5))) ? 'P':'.',
+ (SweepData.ResultFound & ((UINT16) 1 << (4))) ? ' ':(CurrentResult & ((UINT16) 1 << (4))) ? 'P':'.',
+ (SweepData.ResultFound & ((UINT16) 1 << (3))) ? ' ':(CurrentResult & ((UINT16) 1 << (3))) ? 'P':'.',
+ (SweepData.ResultFound & ((UINT16) 1 << (2))) ? ' ':(CurrentResult & ((UINT16) 1 << (2))) ? 'P':'.',
+ (SweepData.ResultFound & ((UINT16) 1 << (1))) ? ' ':(CurrentResult & ((UINT16) 1 << (1))) ? 'P':'.',
+ (SweepData.ResultFound & ((UINT16) 1 << (0))) ? ' ':(CurrentResult & ((UINT16) 1 << (0))) ? 'P':'.'
+ );
+ //
+ /// Merge current result into cumulative result and make it positive.
+ //
+ SweepData.ResultFound |= ~(CurrentResult ^ SweepData.EndResult);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tResultFound : %c %c %c %c %c %c %c %c %c \n\n",
+ (SweepData.ResultFound & ((UINT16) 1 << (8))) ? 'Y':' ',
+ (SweepData.ResultFound & ((UINT16) 1 << (7))) ? 'Y':' ',
+ (SweepData.ResultFound & ((UINT16) 1 << (6))) ? 'Y':' ',
+ (SweepData.ResultFound & ((UINT16) 1 << (5))) ? 'Y':' ',
+ (SweepData.ResultFound & ((UINT16) 1 << (4))) ? 'Y':' ',
+ (SweepData.ResultFound & ((UINT16) 1 << (3))) ? 'Y':' ',
+ (SweepData.ResultFound & ((UINT16) 1 << (2))) ? 'Y':' ',
+ (SweepData.ResultFound & ((UINT16) 1 << (1))) ? 'Y':' ',
+ (SweepData.ResultFound & ((UINT16) 1 << (0))) ? 'Y':' '
+ );
+ } /// End of Delay Sweep
+ //
+ /// Place Final delay values at last passing delay.
+ //
+ if (SweepData.ResultFound == 0xFFFF) {
+ if ( ABS (SweepData.Step) == 1) {
+ for (i = 0; i < ((MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8) ; i++) {
+ if ((SweepData.EndResult & ((UINT16) (1 << i))) == 0) {
+ SweepData.TrnDelays[i] = SweepData.TrnDelays[i] - SweepData.Step;
+ }
+ }
+ }
+ }
+ //
+ // Update Pointer to Sweep Table
+ //
+ SweepTablePtr++;
+ }///End of Edge Detect loop
+ //
+ /// If No Errors are detected, Calculate Data Eye Width and Center
+ //
+ if (SweepData.Error == FALSE) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tData Eye Results:\n\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tByte Left Right\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tLane Edge Edge Width Center\n");
+ for (i = 0; i < ((MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8) ; i++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t %0d", i);
+ TechPtr->Bytelane = i;
+ if (!MemTDataEyeSave (TechPtr, &SweepData, i)) {
+ break;
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ if (SweepData.Error == TRUE) {
+ Status = FALSE;
+ }
+ }
+ } else {
+ Status = FALSE;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t--DATA EYE NOT FOUND--\n\n");
+ NBPtr->FamilySpecificHook[TrackRxEnSeedlessRdWrNoWindBLError] (NBPtr, &SweepData);
+ }
+ return Status;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Initialize the Test Pattern Address for two chip selects and, if this
+ * is a Write Data Eye, write the initial test pattern.
+ *
+ * Test Address is stored in the Sweep info struct. If Memory is not present
+ * then return with False.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in,out] *SweepPtr - Pointer to SWEEP_INFO structure.
+ *
+ * @return BOOLEAN
+ * TRUE - Memory is present
+ * FALSE - No memory present on this Chip Select pair.
+ *
+**
+ */
+BOOLEAN
+STATIC
+MemTInitTestPatternAddress (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT SWEEP_INFO *SweepPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ UINT8 ChipSel;
+ UINT8 CsIndex;
+ BOOLEAN BanksPresent;
+
+ NBPtr = TechPtr->NBPtr;
+ BanksPresent = FALSE;
+ ChipSel = TechPtr->ChipSel;
+ for (CsIndex = 0; CsIndex < NBPtr->CsPerDelay; ChipSel++, CsIndex++, TechPtr->ChipSel++) {
+ ASSERT (CsIndex < MAX_CS_PER_CHANNEL);
+ ASSERT (ChipSel < MAX_CS_PER_CHANNEL);
+ ASSERT (TechPtr->ChipSel < MAX_CS_PER_CHANNEL);
+ //
+ /// If memory is present on this cs, get the test addr
+ //
+ if (NBPtr->GetSysAddr (NBPtr, ChipSel, &(SweepPtr->TestAddrRJ16[CsIndex]))) {
+ if (!(NBPtr->MCTPtr->Status[SbLrdimms]) || ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0)) {
+ BanksPresent = TRUE;
+ SweepPtr->CsAddrValid[CsIndex] = TRUE;
+ //
+ /// If this is a Read Dqs sweep, Write the pattern now.
+ //
+ if (TechPtr->Direction == DQS_READ_DIR) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tTestAddr: %x0000\n", SweepPtr->TestAddrRJ16[CsIndex]);
+ NBPtr->WritePattern (NBPtr, SweepPtr->TestAddrRJ16[CsIndex], TechPtr->PatternBufPtr, TechPtr->PatternLength);
+ }
+ }
+ } else {
+ SweepPtr->CsAddrValid[CsIndex] = FALSE;
+ }
+ } /// End Chip Select Loop
+ TechPtr->ChipSel = TechPtr->ChipSel - CsIndex;
+ //
+ /// return FALSE if no ChipSelects present.
+ //
+ return BanksPresent;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * Test Conditions for exiting the training loop, set the next delay value,
+ * and return status
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in,out] *SweepPtr - Pointer to SWEEP_INFO structure.
+ *
+ * @return BOOLEAN
+ * TRUE - Continue to test with next delay setting
+ * FALSE - Exit training loop. Either the result has been found or
+ * end of delay range has been reached.
+*/
+BOOLEAN
+STATIC
+MemTContinueSweep (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT SWEEP_INFO *SweepPtr
+ )
+{
+ BOOLEAN Status;
+ Status = FALSE;
+ if (SweepPtr->ResultFound != 0xFFFF) {
+ Status = MemTSetNextDelay (TechPtr, SweepPtr);
+ }
+ TechPtr->NBPtr->FamilySpecificHook[RegAccessFence] (TechPtr->NBPtr, NULL);
+ return Status;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the next delay value for each bytelane that needs to
+ * be advanced. It checks the bounds of the delay to see if we are at the
+ * end of the range. If we are to close to advance a whole step value, but
+ * not at the boundary, then we set the delay to the boundary.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in,out] *SweepPtr - Pointer to SWEEP_INFO structure.
+ *
+ */
+
+BOOLEAN
+STATIC
+MemTSetNextDelay (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT SWEEP_INFO *SweepPtr
+ )
+{
+ DIE_STRUCT *MCTPtr;
+ UINT8 i;
+
+ MCTPtr = TechPtr->NBPtr->MCTPtr;
+ //
+ ///< Loop through bytelanes
+ //
+ for (i = 0; i < ((MCTPtr->Status[SbEccDimms] && TechPtr->NBPtr->IsSupported[EccByteTraining]) ? 9 : 8) ; i++) {
+ //
+ /// Skip Bytelanes that have already reached the desired result
+ //
+ if ( (SweepPtr->ResultFound & ((UINT16)1 << i)) == 0) {
+ //
+ /// If a bytelane has reached the end, flag an error and exit
+ //
+ if (SweepPtr->TrnDelays[i] == SweepPtr->EndDelay) {
+ if ((SweepPtr->EndResult & ((UINT16) (1 << i))) != 0) {
+ MCTPtr->ErrStatus[EsbNoDqsPos] = TRUE;
+ SweepPtr->Error = TRUE;
+ }
+ return FALSE;
+ }
+ //
+ /// If the Current delay value is less than a step away from EndDelay,
+ //
+ if ( ABS (SweepPtr->EndDelay - SweepPtr->TrnDelays[i]) < ABS (SweepPtr->Step)) {
+ /// set to EndDelay.
+ //
+ SweepPtr->TrnDelays[i] = SweepPtr->EndDelay;
+ } else {
+ //
+ /// Otherwise, add the step value to it
+ SweepPtr->TrnDelays[i] = SweepPtr->TrnDelays[i] + SweepPtr->Step;
+ }
+ //
+ /// Set InsertionDelayMsk bit if Delay < 0 for this bytelane
+ //
+ if (SweepPtr->TrnDelays[i] < 0) {
+ SweepPtr->InsertionDelayMsk |= ((UINT16) 1 << i);
+ } else {
+ SweepPtr->InsertionDelayMsk &= ~((UINT16) 1 << i);
+ }
+ //
+ /// Write the scaled value to the Delay Register
+ //
+ TechPtr->SetDQSDelayCSR (TechPtr, i, MemTScaleDelayVal (TechPtr, SweepPtr->TrnDelays[i]));
+ }
+ }
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function accepts a delay value in 32nd of a UI and converts it to an
+ * actual register value, taking into consideration NB type, rd/wr,
+ * and frequency.
+ *
+ * Delay = (Min + (Delay * ( (Max - Min) / TRN_DELAY_MAX) )) & Mask
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *Delay - INT8 of delay value;
+ *
+ * @return UINT8 of the adjusted delay value
+*/
+UINT8
+STATIC
+MemTScaleDelayVal (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN INT8 Delay
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ TRN_DLY_PARMS Parms;
+ TRN_DLY_TYPE DelayType;
+ UINT8 NewDelay;
+ INT8 Factor;
+ INT8 ScaledDelay;
+
+ NBPtr = TechPtr->NBPtr;
+ //
+ // Determine Delay Type, Get Delay Parameters, and return scaled Delay value
+ //
+ DelayType = (TechPtr->Direction == DQS_WRITE_DIR) ? AccessWrDatDly : AccessRdDqsDly;
+ NBPtr->GetTrainDlyParms (NBPtr, DelayType, &Parms);
+ Factor = ((Parms.Max - Parms.Min) / TRN_DELAY_MAX);
+ ScaledDelay = Delay * Factor;
+ NewDelay = (Parms.Min + ScaledDelay) & Parms.Mask;
+ return NewDelay;
+}
+
+
+
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function calculates the Center of the Data eye for the specified byte lane
+ * and stores its DQS Delay value for reference.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in,out] *SweepPtr - Pointer to SWEEP_INFO structure.
+ * @param[in] ByteLane - Bytelane number being targeted
+ *
+ */
+BOOLEAN
+STATIC
+MemTDataEyeSave (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT SWEEP_INFO *SweepPtr,
+ IN UINT8 ByteLane
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ UINT8 EyeCenter;
+ UINT8 DlyMin;
+ UINT8 DlyMax;
+ UINT8 EyeWidth;
+ UINT8 Dimm;
+ CH_DEF_STRUCT *ChanPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ ChanPtr = NBPtr->ChannelPtr;
+
+ ASSERT (ByteLane < ((NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8));
+ //
+ // Calculate Data Eye edges, Width, and Center in real terms.
+ //
+ if (TechPtr->Direction == DQS_READ_DIR) {
+ DlyMin = MemTScaleDelayVal (TechPtr, ChanPtr->RdDqsMinDlys[ByteLane]);
+ DlyMax = MemTScaleDelayVal (TechPtr, ChanPtr->RdDqsMaxDlys[ByteLane]);
+ EyeWidth = MemTScaleDelayVal (TechPtr, (ChanPtr->RdDqsMaxDlys[ByteLane] - ChanPtr->RdDqsMinDlys[ByteLane]));
+ EyeCenter = MemTScaleDelayVal (TechPtr, ((ChanPtr->RdDqsMinDlys[ByteLane] + ChanPtr->RdDqsMaxDlys[ByteLane] + 1) / 2));
+ if (!NBPtr->FamilySpecificHook[RdDqsDlyRestartChk] (NBPtr, &EyeCenter)) {
+ return FALSE;
+ }
+ ChanPtr->RdDqsMinDlys[ByteLane] = DlyMin;
+ ChanPtr->RdDqsMaxDlys[ByteLane] = DlyMax;
+ NBPtr->FamilySpecificHook[ForceRdDqsPhaseB] (NBPtr, &EyeCenter);
+ } else {
+ DlyMin = MemTScaleDelayVal (TechPtr, ChanPtr->WrDatMinDlys[ByteLane]);
+ DlyMax = MemTScaleDelayVal (TechPtr, ChanPtr->WrDatMaxDlys[ByteLane]);
+ EyeWidth = MemTScaleDelayVal (TechPtr, (ChanPtr->WrDatMaxDlys[ByteLane] - ChanPtr->WrDatMinDlys[ByteLane]));
+ EyeCenter = MemTScaleDelayVal (TechPtr, ((ChanPtr->WrDatMinDlys[ByteLane] + ChanPtr->WrDatMaxDlys[ByteLane] + 1) / 2));
+ ChanPtr->WrDatMinDlys[ByteLane] = DlyMin;
+ ChanPtr->WrDatMaxDlys[ByteLane] = DlyMax;
+ }
+ //
+ // Flag error for small window.
+ //
+ if (EyeWidth < MemTScaleDelayVal (TechPtr, NBPtr->MinDataEyeWidth (NBPtr))) {
+ TechPtr->SmallDqsPosWindow = TRUE;
+ SweepPtr->Error = TRUE;
+ NBPtr->FamilySpecificHook[TrackRxEnSeedlessRdWrSmallWindBLError] (NBPtr, NULL);
+ }
+
+ IDS_HDT_CONSOLE (MEM_FLOW, " %02x %02x %02x %02x", DlyMin, DlyMax, EyeWidth, EyeCenter);
+
+ TechPtr->SetDQSDelayCSR (TechPtr, ByteLane, EyeCenter);
+ if (!SweepPtr->Error) {
+ TechPtr->DqsRdWrPosSaved |= (UINT8)1 << ByteLane;
+ }
+ TechPtr->DqsRdWrPosSaved |= 0xFE00;
+
+ Dimm = (TechPtr->ChipSel / NBPtr->CsPerDelay) * TechPtr->DlyTableWidth () + ByteLane;
+ if (TechPtr->Direction == DQS_READ_DIR) {
+ ChanPtr->RdDqsDlys[Dimm] = EyeCenter;
+ } else {
+ ChanPtr->WrDatDlys[Dimm] = EyeCenter + ChanPtr->WrDqsDlys[Dimm];
+ }
+
+ return TRUE;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttEdgeDetect.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttEdgeDetect.h
new file mode 100644
index 0000000..113f864
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttEdgeDetect.h
@@ -0,0 +1,117 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttEdgeDetect.h
+ *
+ * Technology Common Training Header file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MTTEDGEDETECT_H_
+#define _MTTEDGEDETECT_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
+#define SCAN_LEFT 0 ///< Scan Down
+#define SCAN_RIGHT 1 ///< Scan Up
+#define LEFT_EDGE 0 ///< searching for the left edge
+#define RIGHT_EDGE 1 ///< searching for the right edge
+
+#define SweepStages 4
+#define TRN_DELAY_MAX 31 ///< Max Virtual delay value for DQS Position Training
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/**
+ * Sweep Table Structure. ROM based table defining parameters for DQS position
+ * training delay sweep.
+*/
+typedef struct {
+ INT8 BeginDelay; ///< Starting Delay Value
+ INT8 EndDelay; ///< Ending Delay Value
+ BOOLEAN ScanDir; ///< Scan Direction. 0 = down, 1 = up
+ INT8 Step; ///< Amount to increment delay value
+ UINT16 EndResult; ///< Result value to stop sweeping (to compare with failure mask)
+ BOOLEAN MinMax; ///< Flag indicating lower (left edge) or higher(right edge)
+} DQS_POS_SWEEP_TABLE;
+
+/**
+ * Sweep Information Struct - Used to track data through the DQS Delay Sweep
+ *
+*/
+typedef struct _SWEEP_INFO {
+ BOOLEAN Error; ///< Indicates an Error has been found
+ UINT32 TestAddrRJ16[MAX_CS_PER_CHANNEL]; ///< System address of chipselects RJ 16 bits (Addr[47:16])
+ BOOLEAN CsAddrValid[MAX_CS_PER_CHANNEL]; ///< Indicates which chipselects to test
+ INT8 BeginDelay; ///< Beginning Delay value (Virtual)
+ INT8 EndDelay; ///< Ending Delay value (Virtual)
+ INT8 Step; ///< Amount to Inc or Dec Virtual Delay value
+ BOOLEAN Edge; ///< Left or right edge (0 = LEFT, 1= RIGHT)
+ UINT16 EndResult; ///< Result value that will stop a Dqs Sweep
+ UINT16 InsertionDelayMsk; ///< Mask of Byte Lanes that should use ins. dly. comparison
+ UINT16 LaneMsk; ///< Mask indicating byte lanes to update
+ UINT16 ResultFound; ///< Mask indicating byte lanes where desired result was found on a sweep
+ INT8 *TrnDelays; ///< Delay Values for each byte (Virtual). Points into the delay values
+} SWEEP_INFO; ///< stored in the CH_DEF_STRUCT.
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#endif /* _MTTEDGEDETECT_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttRdDqs2DEyeRimSearch.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttRdDqs2DEyeRimSearch.c
new file mode 100644
index 0000000..a568f9e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttRdDqs2DEyeRimSearch.c
@@ -0,0 +1,996 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttRdDqs2DEyeRimmSearch.c
+ *
+ * RD DQS 2 Dimentional Training using Eye Rim Sampling
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AGESA.h"
+#include "amdlib.h"
+#include "AdvancedApi.h"
+#include "GeneralServices.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mport.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+#include "OptionMemory.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MTTRDDQS2DEYERIMSEARCH_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+BOOLEAN
+MemTInitializeEyeRimSearch (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemTEyeFill (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+CheckSaveResAtEdge (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x,
+ IN INT8 xdir
+ );
+
+UINT8
+DetermineSavedState (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x
+ );
+
+UINT8
+GetPassFailValue (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x
+ );
+
+VOID
+SetPassFailValue (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x,
+ IN UINT8 result
+ );
+
+VOID
+SetSavedState (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x,
+ IN UINT8 result
+ );
+
+INT8 MemTGet1DTrainedEyeCenter (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane
+ );
+
+BOOLEAN
+CheckForFail (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x
+ );
+
+BOOLEAN
+AllocateSaveLaneStorage (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+INT8
+xlateY (
+ IN INT8 y
+ );
+
+BOOLEAN
+ClearSampledPassResults (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Initialize Eye Rim Search
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE
+ */
+BOOLEAN
+MemTInitializeEyeRimSearch (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 lane;
+ UINT8 vref;
+ MEM_2D_ENTRY *Data;
+ MEM_2D_RIM_ENTRY *RimData;
+ Data = TechPtr->Local2DData;
+ RimData = TechPtr->SavedData;
+ //
+ // Set Boundaries
+ //
+ RimData->xMax = Data->MaxRdDqsSweep - 1;
+ RimData->yMax = (TechPtr->NBPtr->TotalMaxVrefRange / 2) - 1;
+ RimData->xMin = RimData->xMax * -1;
+ RimData->yMin = RimData->yMax * -1;
+
+ RimData->ParallelSampling = EYERIM_PARALLEL_SAMPLING;
+ RimData->BroadcastDelays = EYERIM_BROADCAST_DELAYS;
+ RimData->Dirs[0] = 1;
+ RimData->Dirs[1] = -1;
+
+ RimData->SampleCount = 0;
+ RimData->VrefUpdates = 0;
+ RimData->RdDqsDlyUpdates = 0;
+ for (lane = 0; lane < MemT2DGetMaxLanes (TechPtr); lane ++ ) {
+ for ( vref = 0; vref < TechPtr->NBPtr->TotalMaxVrefRange; vref ++ ) {
+ // 00b = state not saved
+ // 01b = state saved
+ RimData->LaneSaved[lane].Vref[vref].PosRdDqsDly = 0;
+ RimData->LaneSaved[lane].Vref[vref].NegRdDqsDly = 0;
+ // 00b = Fail
+ // 01b = Pass
+ Data->Lane[lane].Vref[vref].PosRdDqsDly = 0;
+ Data->Lane[lane].Vref[vref].NegRdDqsDly = 0;
+ }
+ }
+ return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * This function collects data for Eye Rim Search
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No Errors occurred
+ * @return FALSE - Errors occurred
+ */
+BOOLEAN
+MemT2DRdDQSEyeRimSearch (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 lane;
+ UINT8 j;
+ UINT8 k;
+ INT8 ydir;
+ INT8 xdir;
+ INT8 xi;
+ INT8 yi;
+ INT8 x;
+ INT8 y;
+ INT8 xmax;
+ INT8 ymax;
+ INT8 xmin;
+ INT8 ymin;
+ INT8 xo;
+ INT8 xt;
+ INT8 yo;
+ INT8 yt;
+ UINT8 slane;
+ UINT8 result;
+ INT8 states[2];
+ UINT8 InitialCS;
+ UINT8 ChipSel;
+ UINT8 Aggr;
+ UINT8 SeedCount;
+ UINT32 InPhaseResult;
+ UINT32 PhaseResult180;
+ UINT32 Result;
+ MEM_2D_ENTRY *Data;
+ MEM_2D_RIM_ENTRY RimData;
+ MEM_NB_BLOCK *NBPtr;
+ RD_DQS_2D *VrefPtr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ NBPtr = TechPtr->NBPtr;
+ Data = TechPtr->Local2DData;
+
+ //if (AllocateSaveLaneStorage(TechPtr)) {
+ // return FALSE;
+ //}
+ // Allocate Storage for Rim Search
+ AllocHeapParams.RequestedBufferSize = MemT2DGetMaxLanes (TechPtr) * TechPtr->NBPtr->TotalMaxVrefRange * sizeof (RD_DQS_2D);
+ AllocHeapParams.BufferHandle = AMD_MEM_2D_RDQS_RIM_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, &TechPtr->NBPtr->MemPtr->StdHeader) == AGESA_SUCCESS) {
+ VrefPtr = (RD_DQS_2D *) AllocHeapParams.BufferPtr;
+ } else {
+ SetMemError (AGESA_FATAL, TechPtr->NBPtr->MCTPtr);
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_2D, 0, 0, 0, 0, &TechPtr->NBPtr->MemPtr->StdHeader);
+ return FALSE;
+ }
+ for (lane = 0; lane < MemT2DGetMaxLanes (TechPtr); lane++) {
+ RimData.LaneSaved[lane].Vref = &VrefPtr[lane * TechPtr->NBPtr->TotalMaxVrefRange];
+ }
+ TechPtr->SavedData = &RimData;
+ MemTInitializeEyeRimSearch (TechPtr);
+ MemT2DProgramIntExtVrefSelect (TechPtr);
+ InitialCS = TechPtr->ChipSel;
+ NBPtr->FamilySpecificHook[Adjust2DPhaseMaskBasedOnEcc] (NBPtr, &NBPtr);
+ NBPtr->InitializeRdDqs2dVictimContinuousWrites (NBPtr);
+ //
+ // EnableDisable continuous writes on the agressor channels
+ //
+ IDS_HDT_CONSOLE (MEM_FLOW,"\n\tEye Rim Search, ParallelSampling: %c, BroadcastDelays: %c \n", (RimData.ParallelSampling == TRUE) ? 'Y' : 'N', (RimData.BroadcastDelays == TRUE) ? 'Y' : 'N');
+
+ for (Aggr = 0; Aggr < (NBPtr->MaxAggressorDimms[(NBPtr->Dct + 1) & 1] > 0 ? NBPtr->MaxAggressorDimms[(NBPtr->Dct + 1) & 1] : 1) ; Aggr += (NBPtr->IsSupported[PerDimmAggressors2D] ? 2 : NBPtr->CsPerDelay) ) {
+ ClearSampledPassResults (TechPtr);
+ //
+ // Enable continuous writes on the aggressors
+ //
+ NBPtr->AgressorContinuousWrites (NBPtr, Aggr, TRUE);
+ for (ChipSel = InitialCS; ChipSel < (InitialCS + NBPtr->CsPerDelay); ChipSel++) {
+ xmax = RimData.xMax;
+ xmin = RimData.xMin;
+ ymax = RimData.yMax;
+ ymin = RimData.yMin;
+ if ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) != 0) {
+ TechPtr->ChipSel = ChipSel;
+ for (lane = 0; lane < MemT2DGetMaxLanes (TechPtr); lane ++ ) {
+ //
+ // Two loops to handle each quadrant from the trained point
+ //
+ for ( j = 0; j < 2; j++) {
+ ydir = RimData.Dirs[j];
+ for ( k = 0; k < 2; k++) {
+ xdir = RimData.Dirs[k];
+ //
+ // Sample Loops - stay w/n the defined quadrant
+ // assume xmax = -1 * xmin, ymax = -1 * ymin
+ // initial point must always pass
+ // end point - boundary or two consecutive fails along the y-axis
+ //
+ // Initial dx, dy step state
+ // Starting dy at 8 to reduce samples necessary searching for the eye height
+ states[0] = 0;
+ states[1] = 8;
+ // xi and yi are inital trained points, assumed to be inside the eye
+ // These set the coordinate syst em for the quadrants
+ xi = MemTGet1DTrainedEyeCenter (TechPtr, lane);
+ yi = 0; // Initial center is always at Vref nominal
+ x = xi;
+ y = yi;
+ while (
+ ((xdir > 0 && x >= xi && x <= xmax) ||
+ (xdir < 0 && x <= xi && x >= xmin)) &&
+ ((ydir > 0 && y >= yi && y <= ymax) ||
+ (ydir < 0 && y <= yi && y >= ymin)) &&
+ !(y == yi && (xdir * (xi - x) >= 2) &&
+ CheckSaveResAtEdge (TechPtr, lane, y, x, xdir))
+ ) {
+ //
+ // Decide if result is already sampled, or need to take the sample
+ //
+ if (0 == DetermineSavedState (TechPtr, lane, y, x)) {
+ RimData.SampleCount++;
+ //
+ // Result for this point is not in the cache, sample it
+ //
+ for (slane = 0; slane < MemT2DGetMaxLanes (TechPtr); slane ++ ) {
+ if (!RimData.ParallelSampling && ( slane != lane)) {
+ continue;
+ }
+ //
+ // Calculate the relative offset from the initial trained position for this lane
+ //
+ xo = MemTGet1DTrainedEyeCenter (TechPtr, slane);
+ yo = 0;
+ xt = xo + (x - xi);
+ yt = yo + (y - yi);
+ if (xt > xmax || xt < xmin || yt > ymax || yt < ymin) {
+ continue;
+ }
+ //
+ // Update the vref and lane delays (yt, xt)
+ //
+ if (slane == lane) {
+ //
+ // For processors w/ a single Vref per channel, only set Vref once
+ //
+ if ( NBPtr->Vref != xlateY (yt)) {
+ //
+ // If not already set
+ //
+ TechPtr->SavedData->VrefUpdates++;
+ NBPtr->Vref = xlateY (yt);
+ MemT2DProgramVref (TechPtr, xlateY (yt));
+ }
+ }
+ if (RimData.BroadcastDelays) {
+ // When BroadcastDelays, only set RdDqs once
+ if (slane == lane) {
+ //
+ // If current lane
+ //
+ if ( NBPtr->RdDqsDly != (UINT8) (xt & RimData.xMax)) {
+ //
+ // If the not already set
+ // Account for rollover.
+ //
+ TechPtr->SavedData->RdDqsDlyUpdates++;
+ NBPtr->RdDqsDly = (UINT8) (xt & RimData.xMax);
+ MemT2DPrograRdDQSDly (TechPtr, (UINT8) (xt & RimData.xMax));
+ }
+ }
+ } else {
+ //
+ /// @todo: Set individual lanes
+ //
+ }
+ }
+ //
+ // Perform Memory RW test
+ //
+ InPhaseResult = 0;
+ PhaseResult180 = 0;
+ NBPtr->InitializeRdDqs2dVictimChipSelContinuousWrites (NBPtr);
+ for (SeedCount = 0; SeedCount < NBPtr->MaxSeedCount; SeedCount++) {
+ //
+ // Begin continuous reads and writes on the victim channels
+ //
+ NBPtr->StartRdDqs2dVictimContinuousWrites (NBPtr, SeedCount);
+ //
+ // Occasionally check if all trained lanes have already failed
+ //
+ if ((NBPtr->MaxSeedCount < 4) || ((SeedCount % (NBPtr->MaxSeedCount / 4)) == 0)) {
+ InPhaseResult |= NBPtr->InPhaseCompareRdDqs2DPattern (NBPtr, TechPtr->TestBufPtr, TechPtr->PatternBufPtr, TechPtr->PatternLength * 64);
+ PhaseResult180 |= NBPtr->Phase180CompareRdDqs2DPattern (NBPtr, TechPtr->TestBufPtr, TechPtr->PatternBufPtr, TechPtr->PatternLength * 64);
+ if (((InPhaseResult & NBPtr->PhaseLaneMask) == NBPtr->PhaseLaneMask) && ((PhaseResult180& NBPtr->PhaseLaneMask) == NBPtr->PhaseLaneMask)) {
+ break;
+ }
+ }
+ }
+ //
+ // Obtain the results
+ //
+ for (slane = 0; slane < MemT2DGetMaxLanes (TechPtr); slane ++ ) {
+ if (!RimData.ParallelSampling && (slane != lane)) {
+ continue;
+ }
+ //
+ // Calculate the relative offset from legacy trained
+ //
+ xo = MemTGet1DTrainedEyeCenter (TechPtr, RimData.BroadcastDelays?lane:slane);
+ yo = 0;
+ xt = xo + (x - xi);
+ yt = yo + (y - yi);
+ if (xt > xmax || xt < xmin || yt > ymax || yt < ymin) {
+ continue;
+ }
+ //
+ // In this example, data{}{}{} = 1 is a Fail, 0 is a Pass
+ // In-Phase Results
+ //
+ if (CheckForFail (TechPtr, slane, yt, xt)) {
+ //
+ // Don't overwrite a fail
+ //
+ if (xt > 0) {
+ if ((TechPtr->NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (TechPtr->ChipSel >> 1))) == 0) {
+ // x8, so combine "Nibble X" and "Nibble X+1" results
+ Result = (InPhaseResult >> (slane * 2)) & 0x03;
+ } else {
+ // x4, so use "Nibble" results
+ Result = (InPhaseResult >> slane) & 0x01;
+ }
+ SetPassFailValue (TechPtr, slane, yt, xt, (UINT8) (Result & 0x0F));
+ SetSavedState (TechPtr, slane, yt, xt, (UINT8) (Result & 0x0F));
+ } else {
+ if ((TechPtr->NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (TechPtr->ChipSel >> 1))) == 0) {
+ // x8, so combine "Nibble X" and "Nibble X+1" results
+ Result = (PhaseResult180 >> (slane * 2)) & 0x03;
+ } else {
+ // x4, so use "Nibble" results
+ Result = (PhaseResult180 >> slane) & 0x01;
+ }
+ SetPassFailValue (TechPtr, slane, yt, xt, (UINT8) (Result & 0x0F));
+ SetSavedState (TechPtr, slane, yt, xt, (UINT8) (Result & 0x0F));
+ }
+ }
+ }
+ }
+ // Decide the next sample point based on the result of the current lane
+ result = GetPassFailValue (TechPtr, lane, y, x);
+ InPhaseResult = 0;
+ PhaseResult180 = 0;
+ // States && comments are relative to the ++ Quadrant
+ if (result == 3) {
+ // Current Pass
+ if (states[0] > 0 || states[1] > 0) {
+ if (states[1] > 1 && y * ydir <= ymax - states[1]) {
+ // Current Pass, Continue searching up by leaps
+ states[0] = 0;
+ } else if (states[1] > 1 && y * ydir <= ymax - 4) {
+ // Current Pass, Continue searching up by leaps
+ states[0] = 0;
+ states[1] = 4;
+ } else if (states[1] > 1 && y * ydir <= ymax - 2) {
+ // Current Pass, Continue searching up by leaps
+ states[0] = 0;
+ states[1] = 2;
+ } else if (y * ydir <= ymax - 1) {
+ // Current Pass, Continue searching up by one
+ states[0] = 0;
+ states[1] = 1;
+ } else if (y * ydir == ymax) {
+ // Current Pass and at the top edge, Move right
+ states[0] = 1;
+ states[1] = 0;
+ } else {
+ ASSERT (FALSE);
+ }
+ } else {
+ // Move right one
+ states[0] = 1;
+ states[1] = 0;
+ }
+ } else if (result == 2) {
+ // Current Fail
+ if (states[0] > 0) {
+ // Search down and left
+ states[0] = -1;
+ states[1] = -1;
+ } else if (states[1] > 1 || states[1] < 0) {
+ // Search down
+ states[0] = 0;
+ states[1] = -1;
+ } else if (states[1] == 1) {
+ // Move down and right
+ states[0] = 1;
+ states[1] = -1;
+ } else {
+ ASSERT (FALSE);
+ }
+ } else {
+ ASSERT (FALSE);
+ }
+ // Update the coordinates based on the new state and quadrant direction
+ x += xdir * states[0];
+ y += ydir * states[1];
+ }
+ }
+ }
+ }
+ }
+ }
+ //
+ // Disable continuous writes on the agressor channels
+ //
+ NBPtr->AgressorContinuousWrites (NBPtr, Aggr, FALSE);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW,"\n\tSampleCount:%d",TechPtr->SavedData->SampleCount);
+ IDS_HDT_CONSOLE (MEM_FLOW,"\t\tVref Updates:%d",TechPtr->SavedData->VrefUpdates);
+ IDS_HDT_CONSOLE (MEM_FLOW,"\t\tRdDqs Dly Updates:%d\n",TechPtr->SavedData->RdDqsDlyUpdates);
+ //
+ // Finilazing Victim Continuous writes
+ //
+ NBPtr->FinalizeRdDqs2dVictimContinuousWrites (NBPtr);
+ TechPtr->ChipSel = InitialCS;
+ //
+ // Fill eye based on Rim Search results
+ //
+ MemTEyeFill (TechPtr);
+ //
+ // Display the results the completed eye
+ //
+ MemT2DRdDqsDisplaySearch (TechPtr, Data);
+ //
+ // Restore environment settings after training
+ //
+ if (HeapDeallocateBuffer (AMD_MEM_2D_RDQS_RIM_HANDLE, &TechPtr->NBPtr->MemPtr->StdHeader) != AGESA_SUCCESS) {
+ SetMemError (AGESA_FATAL, TechPtr->NBPtr->MCTPtr);
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_DEALLOCATE_FOR_2D, 0, 0, 0, 0, &TechPtr->NBPtr->MemPtr->StdHeader);
+ }
+ return TRUE;
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ * Fill the data eye
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return
+ */
+VOID
+MemTEyeFill (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ INT8 x;
+ INT8 y;
+ UINT8 lane;
+ UINT8 result;
+ INT8 yLastPass;
+ UINT8 xMax;
+ UINT8 yMax;
+ UINT8 xMin;
+ UINT8 yMin;
+ BOOLEAN FirstPassFound;
+
+ xMax = TechPtr->SavedData->xMax;
+ yMax = TechPtr->SavedData->yMax;
+ xMin = TechPtr->SavedData->xMin;
+ yMin = TechPtr->SavedData->yMin;
+ for (lane = 0; lane < MemT2DGetMaxLanes (TechPtr); lane++) {
+ for (x = xMin ; x <= xMax ; x++) {
+ FirstPassFound = FALSE;
+ yLastPass = yMin;
+ //
+ // Scan for the last passing value
+ //
+ for (y = yMax ; y >= yLastPass ; y--) {
+ result = GetPassFailValue (TechPtr, lane, y, x);
+ if (result == 0) {
+ //
+ // Not Saved, Mark it as FAIL. (Should already be cleared)
+ //
+ } else if (result == 2) {
+ //
+ // FAIL, so Mark as FAIL (Do nothing)
+ //
+ } else if (result == 3) {
+ //
+ // PASS, Mark it and save y value (This will end the loop)
+ //
+ SetPassFailValue (TechPtr, lane, y, x, result);
+ yLastPass = y;
+ } else {
+ ASSERT (FALSE);
+ }
+ }
+ //
+ // Scan for the first pass, the fill until the last pass
+ //
+ for (y = yMin ; y < yLastPass ; y++) {
+ result = GetPassFailValue (TechPtr, lane, y, x);
+ if (result == 0) {
+ //
+ // Not Saved, if we've already found a first Passing value, mark it as a PASS
+ // otherwise, mark it as FAIL. (Should already be cleared)
+ //
+ if (FirstPassFound == TRUE) {
+ SetPassFailValue (TechPtr, lane, y, x, result);
+ }
+ } else if (result == 2) {
+ //
+ // FAIL, so Mark as FAIL (Do nothing)
+ //
+ } else if (result == 3) {
+ //
+ // PASS, Mark it and set FirstPassFound
+ //
+ SetPassFailValue (TechPtr, lane, y, x, result);
+ FirstPassFound = TRUE;
+ } else {
+ ASSERT (FALSE);
+ }
+ } // y Loop
+ } //x Loop
+ } // Lane Loop
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Get the 1D trained center
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] lane - current lane
+ *
+ * @return
+ */
+INT8
+MemTGet1DTrainedEyeCenter (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane
+ )
+{
+ if ((TechPtr->NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (TechPtr->ChipSel >> 1))) == 0) {
+ // Program Byte based for x8 and x16
+ return (INT8)TechPtr->NBPtr->ChannelPtr->RdDqsDlys[(TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) * MAX_DELAYS + lane];
+ } else {
+ return (INT8)TechPtr->NBPtr->ChannelPtr->RdDqsDlys[(TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) * MAX_DELAYS + (lane >> 1)];
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Determine if the saved value is at or close to the edge
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *lane - current lane
+ * @param[in] y - vref value
+ * @param[in] x - RdDqs value
+ * @param[in] xdir - x-direction
+ *
+ * @return TRUE - close to edge, FALSE - not close to edge
+ */
+BOOLEAN
+CheckSaveResAtEdge (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x,
+ IN INT8 xdir
+ )
+{
+ if (x > 0) {
+ if (((TechPtr->Local2DData->Lane[lane].Vref[xlateY (y)].PosRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax) + (-1 * xdir))) & 0x1) == 0) {
+ if (((TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].PosRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax) + (-1 * xdir))) & 0x1) == 1) {
+ if (((TechPtr->Local2DData->Lane[lane].Vref[xlateY (y)].PosRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax) + (-2 * xdir))) & 0x1) == 0) {
+ if (((TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].PosRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax) + (-2 * xdir))) & 0x1) == 1) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+ } else {
+ return FALSE;
+ }
+ } else {
+ return FALSE;
+ }
+ } else {
+ return FALSE;
+ }
+ } else {
+ if (((TechPtr->Local2DData->Lane[lane].Vref[xlateY (y)].NegRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax) + (-1 * xdir))) & 0x1) == 0) {
+ if (((TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].NegRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax) + (-1 * xdir))) & 0x1) == 1) {
+ if (((TechPtr->Local2DData->Lane[lane].Vref[xlateY (y)].NegRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax) + (-2 * xdir))) & 0x1) == 0) {
+ if (((TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].NegRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax) + (-2 * xdir))) & 0x1) == 1) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+ } else {
+ return FALSE;
+ }
+ } else {
+ return FALSE;
+ }
+ } else {
+ return FALSE;
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * determine if a BL has been saved
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] lane - current lane
+ * @param[in] y - vref value
+ * @param[in] x - RdDqs value
+ *
+ * @return 1 - value saved, 0 - value not saved
+ */
+UINT8
+DetermineSavedState (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x
+ )
+{
+ if (x > 0) {
+ return (UINT8) (TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].PosRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax)) & 0x1);
+ } else {
+ return (UINT8) (TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].NegRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax)) & 0x1);
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Determine if a failure has occured
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] lane - current lane
+ * @param[in] y - vref value
+ * @param[in] x - RdDqs value
+ *
+ * @return 2 - Fail, 3 - Pass
+ */
+BOOLEAN
+CheckForFail (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x
+ )
+{
+ if (x > 0) {
+ if ((TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].PosRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax)) & 0x1) == 0) {
+ // value not saved, so it is not fail
+ return TRUE;
+ } else {
+ // value saved, so examine result
+ if ((TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].PosRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax)) & 0x1) == 0) {
+ // result = fail
+ return FALSE;
+ } else {
+ // result = pass
+ return TRUE;
+ }
+ }
+ } else {
+ if ((TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].NegRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax)) & 0x1) == 0) {
+ // value not saved, so it is not fail
+ return TRUE;
+ } else {
+ // value saved, so examine result
+ if ((TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].NegRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax)) & 0x1) == 0) {
+ // result = fail
+ return FALSE;
+ } else {
+ // result = pass
+ return TRUE;
+ }
+ }
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Get pass fail state of lane
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] lane - current lane
+ * @param[in] y - vref value
+ * @param[in] x - RdDqs value
+ *
+ * @return 0 - Value not saved, 2 - Fail, 3 - Pass
+ */
+UINT8
+GetPassFailValue (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x
+ )
+{
+ if (x > 0) {
+ if ((TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].PosRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax)) & 0x1) == 0) {
+ // value not saved
+ return 0;
+ } else {
+ // value saved, so return pass/fail
+ return ((TechPtr->Local2DData->Lane[lane].Vref[xlateY (y)].PosRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax)) & 0x1) == 0) ? 2 : 3;
+ }
+ } else {
+ if ((TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].NegRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax)) & 0x1) == 0) {
+ // value not saved
+ return 0;
+ } else {
+ // value saved, so return pass/fail
+ return ((TechPtr->Local2DData->Lane[lane].Vref[xlateY (y)].NegRdDqsDly >> (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax)) & 0x1) == 0) ? 2 : 3;
+ }
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Set the Pass/Fail state of lane
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *lane - current lane
+ * @param[in] y - vref value
+ * @param[in] x - RdDqs value
+ * @param[in] result - result value
+ *
+ * @return Saved Value
+ */
+VOID
+SetPassFailValue (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x,
+ IN UINT8 result
+ )
+{
+ if (x > 0) {
+ TechPtr->Local2DData->Lane[lane].Vref[xlateY (y)].PosRdDqsDly |= (result == 0) ? (1 << (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax))) : 0;
+ } else {
+ TechPtr->Local2DData->Lane[lane].Vref[xlateY (y)].NegRdDqsDly |= (result == 0) ? (1 << (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax))) : 0;
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Set the save state of lane
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *lane - current lane
+ * @param[in] y - vref value
+ * @param[in] x - RdDqs value
+ * @param[in] result - result value
+ *
+ * @return Saved Value
+ */
+VOID
+SetSavedState (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 lane,
+ IN INT8 y,
+ IN INT8 x,
+ IN UINT8 result
+ )
+{
+ if (x > 0) {
+ TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].PosRdDqsDly |= (1 << (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax)));
+ } else {
+ TechPtr->SavedData->LaneSaved[lane].Vref[xlateY (y)].NegRdDqsDly |= (1 << (TechPtr->SavedData->xMax - (x & TechPtr->SavedData->xMax)));
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Allocate data storage
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return FALSE - No Errors occurred
+ * @return TRUE - Errors occurred
+ */
+BOOLEAN
+AllocateSaveLaneStorage (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ RD_DQS_2D *VrefPtr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ UINT8 Lane;
+
+ AllocHeapParams.RequestedBufferSize = MemT2DGetMaxLanes (TechPtr) * TechPtr->NBPtr->TotalMaxVrefRange * sizeof (RD_DQS_2D);
+ AllocHeapParams.BufferHandle = AMD_MEM_2D_RDQS_RIM_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, &TechPtr->NBPtr->MemPtr->StdHeader) == AGESA_SUCCESS) {
+ VrefPtr = (RD_DQS_2D *) AllocHeapParams.BufferPtr;
+ } else {
+ SetMemError (AGESA_FATAL, TechPtr->NBPtr->MCTPtr);
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_2D, 0, 0, 0, 0, &TechPtr->NBPtr->MemPtr->StdHeader);
+ return TRUE;
+ }
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ TechPtr->SavedData->LaneSaved[Lane].Vref = &VrefPtr[Lane * TechPtr->NBPtr->TotalMaxVrefRange];
+ }
+ return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Translate Vref into a positive, linear value that can be used as an
+ * array index.
+ *
+ * @param[in] y - vref value
+ *
+ * @return Saved Value
+ */
+INT8
+xlateY (
+ IN INT8 y
+ )
+{
+ ASSERT ( y > -0x10);
+ ASSERT ( y < 0x10);
+ return (y + 0xF) & 0x1F;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * Re-walking the eye rim for each aggressor combination, which invalidates previous Passes
+ * in the sample array. Previous Fails in the sample array remain valid. Knowledge of previous Fails
+ * and speeds sampling for the subsequent walks, esp. when used in conjunction w/ ParallelSampling
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE
+ */
+BOOLEAN
+ClearSampledPassResults (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 lane;
+ UINT8 vref;
+ MEM_2D_ENTRY *Data;
+ MEM_2D_RIM_ENTRY *RimData;
+ Data = TechPtr->Local2DData;
+ RimData = TechPtr->SavedData;
+ for (lane = 0; lane < MemT2DGetMaxLanes (TechPtr); lane ++ ) {
+ for ( vref = 0; vref < TechPtr->NBPtr->TotalMaxVrefRange; vref ++ ) {
+ RimData->LaneSaved[lane].Vref[vref].PosRdDqsDly &= ~(Data->Lane[lane].Vref[vref].PosRdDqsDly);
+ Data->Lane[lane].Vref[vref].PosRdDqsDly = 0;
+ RimData->LaneSaved[lane].Vref[vref].NegRdDqsDly &= ~(Data->Lane[lane].Vref[vref].NegRdDqsDly);
+ Data->Lane[lane].Vref[vref].NegRdDqsDly = 0;
+ }
+ }
+ return TRUE;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttRdDqs2DTraining.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttRdDqs2DTraining.c
new file mode 100644
index 0000000..0fc13f9
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttRdDqs2DTraining.c
@@ -0,0 +1,1185 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttRdDqs2DTraining.c
+ *
+ * RD DQS 2 dimentional training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "AdvancedApi.h"
+#include "GeneralServices.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mport.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+#include "OptionMemory.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MTTRDDQS2DTRAINING_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define MAX_DELAYS 9 /* 8 data bytes + 1 ECC byte */
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemT2DRdDQSProcessConvolution (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+ extern MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes 2D training for Rd DQS
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No Errors occurred
+ * @return FALSE - Errors occurred
+ */
+
+BOOLEAN
+MemTAmdRdDqs2DTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ MEM_DATA_STRUCT *MemPtr;
+ UINT8 Dct;
+ UINT8 ChipSel;
+ MEM_2D_ENTRY Data;
+ UINT8 Lane;
+ UINT8 Vref;
+ BOOLEAN Status;
+ BOOLEAN DCT_x4Present;
+ UINT8 MaxLanes;
+ PSO_TABLE *PsoTable;
+ RD_DQS_2D *VrefPtr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ NBPtr = TechPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+ AGESA_TESTPOINT (TpProcMem2dRdDqsTraining, &(MemPtr->StdHeader));
+ PsoTable = MemPtr->ParameterListPtr->PlatformMemoryConfiguration;
+ //
+ // Set environment settings before training
+ //
+ IDS_HDT_CONSOLE (MEM_STATUS, "\n\nStart RD DQS 2D training.\n\n");
+ MemTBeginTraining (TechPtr);
+ //
+ // Allocate heap for the 2D RdDqs/Vref Data structure
+ //
+ DCT_x4Present = FALSE;
+ // Check DCTs for x4 DIMMs
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ if (NBPtr->ChannelPtr->DimmNibbleAccess != 0) {
+ DCT_x4Present = TRUE;
+ break;
+ }
+ }
+
+ NBPtr->SwitchDCT (NBPtr, 0);
+ // If DCT0 or DCT1 have x4 DIMMs, additonal allocate space
+ if (DCT_x4Present == TRUE) {
+ // Per Nibble
+ MaxLanes = TechPtr->NBPtr->MCTPtr->Status[SbEccDimms] ? 18 : 16;
+ } else {
+ // Per Byte
+ MaxLanes = TechPtr->NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8;
+ }
+ MaxLanes = 8; /// @todo Family specific hook
+ AllocHeapParams.RequestedBufferSize = MaxLanes * NBPtr->TotalMaxVrefRange * sizeof (RD_DQS_2D);
+ AllocHeapParams.BufferHandle = AMD_MEM_2D_RDQS_HANDLE;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) == AGESA_SUCCESS) {
+ VrefPtr = (RD_DQS_2D *) AllocHeapParams.BufferPtr;
+ } else {
+ SetMemError (AGESA_FATAL, NBPtr->MCTPtr);
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_2D, 0, 0, 0, 0, &MemPtr->StdHeader);
+ return TRUE;
+ }
+ for (Lane = 0; Lane < MaxLanes; Lane++) {
+ Data.Lane[Lane].Vref = &VrefPtr[Lane * NBPtr->TotalMaxVrefRange];
+ }
+ //
+ // Setup hardware training engine
+ //
+ TechPtr->Direction = DQS_READ_DIR;
+ TechPtr->TrainingType = TRN_DQS_POSITION;
+ NBPtr->FamilySpecificHook[SetupHwTrainingEngine] (NBPtr, &TechPtr->TrainingType);
+
+ Data.Vnom = NBPtr->TotalMaxVrefRange / 2; // Set Nominal Vref
+ Data.MaxRdDqsSweep = NBPtr->TotalRdDQSDlyRange / 2; // Set Nominal Vref
+ ASSERT (NBPtr->TotalRdDQSDlyRange <= MAX_RD_DQS_ENTRIES);
+ //
+ // Execute 2d Rd DQS training for all Dcts/Chipselects
+ //
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ Status = FALSE;
+ if (MemTCheck2DTrainingPerConfig (TechPtr)) {
+ for (ChipSel = 0; ChipSel < NBPtr->CsPerChannel; ChipSel = ChipSel + NBPtr->CsPerDelay ) {
+ if ( (NBPtr->MCTPtr->Status[SbLrdimms]) ? ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0) :
+ ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) != 0) ) {
+ //Initialize storage
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ for (Vref = 0; Vref < NBPtr->TotalMaxVrefRange; Vref++) {
+ Data.Lane[Lane].Vref[Vref].PosRdDqsDly = 0;
+ Data.Lane[Lane].Vref[Vref].NegRdDqsDly = 0;
+ }
+ }
+ TechPtr->ChipSel = ChipSel;
+ IDS_HDT_CONSOLE (MEM_FLOW,"\tChip Select: %02x \n", TechPtr->ChipSel);
+ //
+ // 1. Sample the data eyes for each channel:
+ //
+ TechPtr->Local2DData = &Data;
+ if (TechPtr->NBPtr->MemN2DRdDQSDataCollection (NBPtr)) {
+ //
+ // 2. Process the array of results with a diamond convolution mask, summing the number passing sample points.
+ //
+ // Determine Diamond Mask Height
+ if (MemT2DRdDQSHeight (TechPtr, &Data)) {
+ // Apply Mask
+ if (MemT2DRdDQSApplyMask (TechPtr, &Data)) {
+ // Convolution
+ if (MemT2DRdDQSProcessConvolution (TechPtr, &Data)) {
+ //
+ // 3. Program the final DQS delay values.
+ //
+ if (MemT2DRdDQSPrograMaxRdDQSDly (TechPtr, &Data)) {
+ //
+ // Find the Smallest Positive or Negative Margin for current CS
+ //
+ if (MemT2DRdDQSFindCsVrefMargin (TechPtr, &Data)) {
+ Status = TRUE;
+ //
+ // DATAEYE - Allocate Temp storage for Generate Composite Eyes,
+ // Save composite eye for CS Pair into Allocated Storage.
+ TechPtr->TechnologySpecificHook[DataEyeSaveCompositeEyes] (TechPtr, &Data);
+ }
+ }
+ }
+ }
+ }
+ }
+ if (Status == FALSE) {
+ SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+ PutEventLog (AGESA_ERROR, MEM_ERROR_2D_DQS_ERROR, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ }
+ } // Chipselect
+ } // End of ChipSel for loop.
+
+ //
+ // DATAEYE - Compress Eyes, Deallocate temp storage. Allocate memory for compressed eyes,
+ // copy eyes to new struct, fixup pointers.
+ //
+ TechPtr->TechnologySpecificHook[DataEyeCompressEyes] (TechPtr, &Data);
+ //
+ // Find the Max and Min Vref values for each DCT
+ //
+ if (Status == TRUE) {
+ if (MemT2DRdDQSFinalVrefMargin (TechPtr, &Data)) {
+ //
+ // Program the Max Vref value
+ //
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tProgramming Final Vref for channel\n\n");
+ MemT2DProgramVref (TechPtr, NBPtr->ChannelPtr->MaxVref);
+ Status = TRUE;
+ } else {
+ SetMemError (AGESA_ERROR, NBPtr->MCTPtr);
+ PutEventLog (AGESA_ERROR, MEM_ERROR_2D_DQS_VREF_MARGIN_ERROR, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ }
+ }
+ }
+ }
+ //
+ // Restore environment settings after training
+ //
+ if (HeapDeallocateBuffer (AMD_MEM_2D_RDQS_HANDLE, &MemPtr->StdHeader) != AGESA_SUCCESS) {
+ SetMemError (AGESA_FATAL, NBPtr->MCTPtr);
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_DEALLOCATE_FOR_2D, 0, 0, 0, 0, &MemPtr->StdHeader);
+ }
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tEnd\n");
+ MemTEndTraining (TechPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\nEnd RD DQS 2D training\n\n");
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determines the maximum number of lanes to program 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - Configuration valid
+ * FALSE - Configuration invalid
+ */
+BOOLEAN
+MemTCheck2DTrainingPerConfig (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 i;
+ if (TechPtr->NBPtr->RefPtr->ForceTrainMode == FORCE_TRAIN_AUTO) {
+ i = 0;
+ while (memPlatSpecFlowArray[i] != NULL) {
+ if ((memPlatSpecFlowArray[i])->S2D (TechPtr->NBPtr, (memPlatSpecFlowArray[i])->EntryOfTables)) {
+ return TRUE;
+ }
+ i++;
+ }
+ }
+ return FALSE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determines the maximum number of lanes to program 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - Max Number of Lanes
+ */
+UINT8
+MemT2DGetMaxLanes (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 MaxLanes;
+ if ((TechPtr->NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (TechPtr->ChipSel >> 1))) != 0) {
+ // Per Nibble
+ MaxLanes = TechPtr->NBPtr->MCTPtr->Status[SbEccDimms] ? 18 : 16;
+ } else {
+ // Per Byte
+ MaxLanes = TechPtr->NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8;
+ }
+ MaxLanes = 8;
+ return MaxLanes;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs Vref to internal or external control for 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+VOID
+MemT2DProgramIntExtVrefSelect (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFVrefSel, (TechPtr->NBPtr->RefPtr->ExternalVrefCtl ? 0x0000 : 0x0001));
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs Vref for 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Vref - Vref value
+ *
+ */
+VOID
+MemT2DProgramVref (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Vref
+ )
+{
+ ID_INFO CallOutIdInfo;
+ CallOutIdInfo.IdField.SocketId = TechPtr->NBPtr->MCTPtr->SocketId;
+ CallOutIdInfo.IdField.ModuleId = TechPtr->NBPtr->MCTPtr->DieId;
+ if (TechPtr->NBPtr->RefPtr->ExternalVrefCtl == FALSE) {
+ //
+ // Internal vref control
+ /// @todo : Separate Family-Specific Funtionality
+ //
+ //
+ // This is 1/2 VrefDAC value Sign bit is shifted into place.
+ //
+ ASSERT (Vref < 32);
+ if (Vref < 15) {
+ Vref = (31 - Vref) << 1;
+ } else {
+ Vref = (Vref - 15) << 1;
+ }
+ TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFVrefDAC, Vref << 2);
+ } else {
+ // External vref control
+ AGESA_TESTPOINT (TpProcMemBefore2dTrainExtVrefChange, &(TechPtr->NBPtr->MemPtr->StdHeader));
+ TechPtr->NBPtr->MemPtr->ParameterListPtr->ExternalVrefValue = Vref;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n2D training External Vref callout \n");
+ //
+ /// @todo: Implement UEFI DXE Callout for AgesaExternal2dTrainVrefChange before uncommenting this
+ //
+ // AgesaExternal2dTrainVrefChange ((UINTN) CallOutIdInfo.IdInformation, TechPtr->NBPtr->MemPtr);
+ AGESA_TESTPOINT (TpProcMemAfter2dTrainExtVrefChange, &(TechPtr->NBPtr->MemPtr->StdHeader));
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs RdDQS for 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] RdDQSDly - RdDqs value
+ *
+ */
+VOID
+MemT2DPrograRdDQSDly (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 RdDQSDly
+ )
+{
+ UINT32 RdDqsTime;
+ // Program BL registers for both nibble (x4) and bytes (x8, x16)
+ RdDqsTime = 0;
+ RdDqsTime = (RdDQSDly & 0x1F) << 8;
+ RdDqsTime = RdDqsTime | (RdDQSDly & 0x1F);
+ if ((TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) == 0) {
+ TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFDataByteRxDqsDLLDimm0Broadcast, RdDqsTime);
+ } else if ((TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) == 1) {
+ TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFDataByteRxDqsDLLDimm1Broadcast, RdDqsTime);
+ } else if ((TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) == 2) {
+ TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFDataByteRxDqsDLLDimm2Broadcast, RdDqsTime);
+ } else if ((TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) == 3) {
+ TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFDataByteRxDqsDLLDimm3Broadcast, RdDqsTime);
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function stores data for 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ * @param[in] *InPhaseResult[] - Array of inphase results
+ * @param[in] *PhaseResult180[] - Array of Phase 180 results
+ *
+ * @return TRUE - No Errors occurred
+ */
+VOID
+StoreResult (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data,
+ IN UINT32 InPhaseResult[],
+ IN UINT32 PhaseResult180[]
+ )
+{
+ UINT8 Lane;
+ UINT8 Vref;
+ UINT8 RdDqsDly;
+ UINT32 Result;
+ UINT32 Result180;
+ UINT8 Index;
+ Vref = TechPtr->NBPtr->Vref;
+ RdDqsDly = TechPtr->NBPtr->RdDqsDly;
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ for (RdDqsDly = 0; RdDqsDly < Data->MaxRdDqsSweep; RdDqsDly++) {
+ if ((TechPtr->NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (TechPtr->ChipSel >> 1))) == 0) {
+ // x8, so combine "Nibble X" and "Nibble X+1" results
+ Index = Lane * 2;
+ Result = (InPhaseResult[RdDqsDly] >> Index) & 0x03;
+ Result180 = (PhaseResult180[RdDqsDly] >> Index) & 0x03;
+ } else {
+ // x4, so use "Nibble" results
+ Result = (InPhaseResult[RdDqsDly] >> Lane) & 0x01;
+ Result180 = (PhaseResult180[RdDqsDly] >> Lane) & 0x01;
+ }
+ Data->Lane[Lane].Vref[Vref].PosRdDqsDly |= (Result == 0) ? (1 << (Data->MaxRdDqsSweep - 1 - RdDqsDly)) : 0;
+ Data->Lane[Lane].Vref[Vref].NegRdDqsDly |= (Result180 == 0) ? (1 << (Data->MaxRdDqsSweep - 1 - RdDqsDly)) : 0;
+ }
+ }
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determines the height of data for 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return TRUE - No Errors occurred
+ * @return FALSE - Errors occurred
+ */
+BOOLEAN
+MemT2DRdDQSHeight (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ )
+{
+ UINT8 Lane;
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ Data->Lane[Lane].HalfDiamondHeight = 0x0F;
+ }
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t Lane: ");
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", Lane);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tHeight: ");
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", (2*(Data->Lane[Lane].HalfDiamondHeight) + 1));
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ );
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets the width for 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return width
+ */
+UINT8
+MemGet2dRdDQSWidth (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ )
+{
+ return TechPtr->NBPtr->DiamondWidthRd;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function gets the step height for the dimond mask for 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ * @param[in] Vref - current Vref value
+ * @param[in] Lane - current Lane
+ *
+ * @return TRUE - Step found and value should be updated
+ * FALSE - Step not found and value should not be updated
+ */
+BOOLEAN
+MemCheck2dRdDQSDiamondMaskStep (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data,
+ IN UINT8 Vref,
+ IN UINT8 Lane
+ )
+{
+ UINT8 M;
+ UINT8 VrefVal;
+ UINT8 width;
+ UINT8 i;
+ BOOLEAN status;
+ // m = -1 * height/width
+ // (y-b)/m = x
+ status = FALSE;
+ if (Vref > (Data->Vnom - 1)) {
+ VrefVal = (Vref + 1) - Data->Vnom;
+ } else {
+ VrefVal = Vref;
+ }
+ width = (MemGet2dRdDQSWidth (TechPtr, Data) - 1) / 2;
+ M = Data->Lane[Lane].HalfDiamondHeight / width;
+ i = 1;
+ while (i <= Data->Lane[Lane].HalfDiamondHeight) {
+ i = i + M;
+ if (VrefVal == i) {
+ status = TRUE;
+ }
+ }
+ return status;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function applies a mask fo 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return TRUE - No Errors occurred
+ * @return FALSE - Errors occurred
+ */
+BOOLEAN
+MemT2DRdDQSApplyMask (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ )
+{
+ UINT8 RdDqsDly;
+ UINT8 Lane;
+ UINT8 Height;
+ UINT8 Width;
+ UINT32 PosNegData;
+ UINT8 Vref;
+ UINT8 count;
+ UINT8 Dly;
+ UINT8 endWidth;
+ UINT8 startWidth;
+ UINT8 origEndWidth;
+ UINT8 origStartWidth;
+ UINT8 maxOverLapWidth;
+ UINT8 startOverLapWidth;
+ BOOLEAN maxHeightExceeded;
+ BOOLEAN negVrefComplete;
+ BOOLEAN PosRdDqsToNegRdDqs;
+ BOOLEAN NegRdDqsToPosRdDqs;
+ MEM_NB_BLOCK *NBPtr;
+ NBPtr = TechPtr->NBPtr;
+ //
+ // Initialize Convolution
+ //
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ for (RdDqsDly = 0; RdDqsDly < NBPtr->TotalRdDQSDlyRange; RdDqsDly++) {
+ Data->Lane[Lane].Convolution[RdDqsDly] = 0;
+ NBPtr->FamilySpecificHook[Adjust2DDelayStepSize] (NBPtr, &RdDqsDly);
+ }
+ }
+ endWidth = 0;
+ startWidth = 0;
+ origEndWidth = 0;
+ origStartWidth = 0;
+ startOverLapWidth = 0;
+ maxOverLapWidth = 0;
+ maxHeightExceeded = FALSE;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tDetermining Width");
+ //
+ // Get the Width of Diamond
+ //
+ Width = MemGet2dRdDQSWidth (TechPtr, Data);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tWidth: %02x\n", Width);
+ ASSERT (Width != 0);
+
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tExecuting convolution function\n");
+ //
+ // Perform the convolution by sweeping the mask function centered at nominal Vref. Results in a one
+ // dimensional array with FOM values at each delay for each lane. Choose the delay setting at the peak
+ // FOM value.
+ //
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ Height = Data->Lane[Lane].HalfDiamondHeight;
+ ASSERT (Height < Data->Vnom);
+ //
+ // RdDqsDly is divided around "Data->MaxRdDqsSweep" into positive and negative directions
+ // Positive direction -> RdDqsDly = 0 to (Data->MaxRdDqsSweep - 1)
+ // Negative direction -> RdDqsDly = Data->MaxRdDqsSweep to (NBPtr->TotalRdDQSDlyRange - 1)
+ //
+ for (RdDqsDly = 0; RdDqsDly < NBPtr->TotalRdDQSDlyRange; RdDqsDly++) {
+ // Vref loop is divided around "Data->Vnom - 1" into positive and negative directions
+ // Negative direction -> Vref = 0 ("Data->Vnom - 1") to Height("Data->Vnom - 1" - Height)
+ // Positive direction -> Vref = "Data->Vnom" to Height("Data->Vnom" + Height)
+ //
+ negVrefComplete = FALSE;
+ PosRdDqsToNegRdDqs = FALSE;
+ NegRdDqsToPosRdDqs = FALSE;
+ for (Vref = 0; Vref < (NBPtr->TotalMaxVrefRange - 1); Vref++) {
+ // Initial negative direction where Vref = 0 ("Data->Vnom - 1"), so we need to set
+ // initial startWidth and endWidth for +/- RdDqs
+ //
+ // Create common delay based on +/- RdDqs
+ if (RdDqsDly > (Data->MaxRdDqsSweep - 1)) {
+ Dly = RdDqsDly - Data->MaxRdDqsSweep;
+ } else {
+ Dly = RdDqsDly;
+ }
+ if (Vref == 0 ) {
+ // Initialize -Vref
+ maxHeightExceeded = FALSE; // reset for start of -Vref
+ // Case 1: if +RdDqs - Check for lower bound (Width/2 > RdDqs > 0)
+ // : if -RdDqs - Check for lower bound (Width/2 + Data->MaxRdDqsSweep > RdDqs > Data->MaxRdDqsSweep)
+ if (Dly < Width / 2) {
+ endWidth = Dly + Width / 2 + 1;
+ startWidth = 0;
+ } else if ((Dly + Width / 2) > (Data->MaxRdDqsSweep - 1)) {
+ // Case 2: if +RdDqs - Check for upper bound ((Data->MaxRdDqsSweep - 1) < RdDqs < ((Data->MaxRdDqsSweep - 1) - Width/2))
+ // : if -RdDqs - Check for lower bound ((DatNBPtra->TotalRdDQSDlyRange - 1) < RdDqs < ((NBPtr->TotalRdDQSDlyRange - 1) - Width/2))
+ endWidth = Data->MaxRdDqsSweep;
+ startWidth = Dly - Width / 2;
+ } else {
+ // Set the initial "startWidth" and "endWidth" for +/- RdDqs
+ endWidth = Dly + Width / 2 + 1;
+ startWidth = Dly - Width / 2;
+ }
+ origEndWidth = endWidth;
+ origStartWidth = startWidth;
+ } else if (Vref == Data->Vnom) {
+ // Initialize +Vref
+ endWidth = origEndWidth;
+ startWidth = origStartWidth;
+ maxHeightExceeded = FALSE; // reset for start of +Vref
+ negVrefComplete = TRUE;
+ } else if ((Vref > (Data->Vnom + Height)) && negVrefComplete == TRUE) {
+ break; //switch to next RdDqs Dly if height exceeded for +vref and -vref complete
+ } else {
+ if (startWidth >= endWidth) {
+ if (RdDqsDly == (NBPtr->TotalRdDQSDlyRange - 1)) {
+ // Special condition for end of -RdDqs range
+ startWidth = Data->MaxRdDqsSweep - 1;
+ endWidth = Data->MaxRdDqsSweep;
+ } else {
+ // Width = 0, but Height not reached,
+ startWidth = Dly;
+ endWidth = Dly + 1;
+ }
+ } else {
+ // Check for Case 1 and Case 2 above
+ if ((RdDqsDly + Width / 2) > (NBPtr->TotalRdDQSDlyRange - 1)) {
+ endWidth = origEndWidth;
+ }
+ }
+ maxHeightExceeded = FALSE;
+ }
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ if (Lane == 0) {
+ if (RdDqsDly == (Data->MaxRdDqsSweep - (Width / 2)) ) {
+ Data->DiamondLeft[Vref] = startWidth;
+ Data->DiamondRight[Vref] = endWidth - 1;
+ }
+ }
+ );
+ //
+ // Determine the correct RdDqs (+/-) and Vref (+/-)direction
+ //
+ if (maxHeightExceeded == FALSE) {
+ if (RdDqsDly < Data->MaxRdDqsSweep) {
+ if (Vref > (Data->Vnom - 1)) {
+ PosNegData = Data->Lane[Lane].Vref[Vref].PosRdDqsDly; // +RdDqs Dly, +Vref
+ } else {
+ PosNegData = Data->Lane[Lane].Vref[(Data->Vnom - 1) - Vref].PosRdDqsDly; // +RdDqs Dly, -Vref
+ }
+ } else {
+ if (Vref > (Data->Vnom - 1)) {
+ PosNegData = Data->Lane[Lane].Vref[Vref].NegRdDqsDly; // -RdDqs Dly, +Vref
+ } else {
+ PosNegData = Data->Lane[Lane].Vref[(Data->Vnom - 1) - Vref].NegRdDqsDly; // -RdDqs Dly, -Vref
+ }
+ }
+ //
+ // Case 1: Non-overlap condition:
+ // Count the number of passes from "startWidth" to "endWidth"
+ //
+ for (count = startWidth; count < endWidth; count++) {
+ Data->Lane[Lane].Convolution[RdDqsDly] = (UINT8) ((PosNegData >> count) & 0x1) + Data->Lane[Lane].Convolution[RdDqsDly];
+ }
+ // Case 2: Overlay between +RdDqs and -RdDqs starting from +RdDqs
+ // Count the number of passes from "startWidth" to "endWidth"
+ //
+ if ((RdDqsDly <= (Data->MaxRdDqsSweep - 1) && (RdDqsDly > ((Data->MaxRdDqsSweep - 1) - Width / 2)))) {
+ startOverLapWidth = 0;
+ if (Vref == 0 || Vref == Data->Vnom) {
+ maxOverLapWidth = (RdDqsDly + Width / 2) - (Data->MaxRdDqsSweep - 1); // Initial overlap max width size
+ } else if (maxOverLapWidth == 0) {
+ maxOverLapWidth = startOverLapWidth; // Stop counting after overlap region complete
+ }
+ // Ensure that +/- vref is set correctly
+ if (Vref > (Data->Vnom - 1)) {
+ PosNegData = Data->Lane[Lane].Vref[Vref].NegRdDqsDly;
+ } else {
+ PosNegData = Data->Lane[Lane].Vref[(Data->Vnom - 1) - Vref].NegRdDqsDly;
+ }
+ // Need to count the number of passes when range extends from Pos RdDqs to Neg RdDqs
+ for (count = startOverLapWidth; count < maxOverLapWidth; count++) {
+ Data->Lane[Lane].Convolution[RdDqsDly] = (UINT8) ((PosNegData >> count) & 0x1) + Data->Lane[Lane].Convolution[RdDqsDly];
+ }
+ if (maxOverLapWidth > 0) {
+ if (MemCheck2dRdDQSDiamondMaskStep (TechPtr, Data, Vref, Lane) || (Vref == 1) || (Vref == Data->Vnom)) {
+ maxOverLapWidth--; // Reduce overlap width outside of diamond mask
+ }
+ PosRdDqsToNegRdDqs = TRUE;
+ }
+ }
+ if (((RdDqsDly - Data->MaxRdDqsSweep) < Width / 2) && (RdDqsDly > (Data->MaxRdDqsSweep - 1))) {
+ //
+ // Case 3: Overlay between -RdDqs and +RdDqs starting from -RdDqs
+ // Count the number of passes from "startWidth" to "endWidth"
+ //
+ maxOverLapWidth = Data->MaxRdDqsSweep;
+ if (Vref == 0 || Vref == Data->Vnom) {
+ startOverLapWidth = RdDqsDly - Width / 2; // Initial overlap start point
+ } else if (startOverLapWidth > maxOverLapWidth) {
+ maxOverLapWidth = maxOverLapWidth - 1; // Continue to count until MaxHeight excceded
+ }
+ // Ensure that vref + or - is set correctly
+ if (Vref > (Data->Vnom - 1)) {
+ PosNegData = Data->Lane[Lane].Vref[Vref].PosRdDqsDly;
+ } else {
+ PosNegData = Data->Lane[Lane].Vref[(Data->Vnom - 1) - Vref].PosRdDqsDly;
+ }
+ // Need to count the number of passes when range extends from Pos RdDqs to Neg RdDqs
+ for (count = startOverLapWidth; count < maxOverLapWidth; count++) {
+ Data->Lane[Lane].Convolution[RdDqsDly] = (UINT8) ((PosNegData >> count) & 0x1) + Data->Lane[Lane].Convolution[RdDqsDly];
+ }
+ if (startOverLapWidth < maxOverLapWidth) {
+ if (MemCheck2dRdDQSDiamondMaskStep (TechPtr, Data, Vref, Lane) || (Vref == 1) || (Vref == Data->Vnom)) {
+ startOverLapWidth++; // Reduce overlap width outside of diamond mask
+ }
+ NegRdDqsToPosRdDqs = TRUE;
+ }
+ }
+ }
+ if (MemCheck2dRdDQSDiamondMaskStep (TechPtr, Data, Vref, Lane) || (Vref == 1) || (Vref == Data->Vnom)) {
+ if (PosRdDqsToNegRdDqs) {
+ startWidth++;
+ endWidth = Data->MaxRdDqsSweep;
+ PosRdDqsToNegRdDqs = FALSE;
+ } else if (NegRdDqsToPosRdDqs) {
+ startWidth = 0;
+ endWidth--;
+ NegRdDqsToPosRdDqs = FALSE;
+ } else {
+ startWidth++;
+ endWidth--;
+ }
+ }
+ NBPtr->FamilySpecificHook[Adjust2DVrefStepSize] (NBPtr, &Vref);
+ }
+ NBPtr->FamilySpecificHook[Adjust2DDelayStepSize] (NBPtr, &RdDqsDly);
+ }
+ }
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t Diamond Shape: \n");
+ for (Vref = 0; Vref < (NBPtr->TotalMaxVrefRange - 1); Vref++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ for (RdDqsDly = (Data->MaxRdDqsSweep - Width); RdDqsDly < Data->MaxRdDqsSweep; RdDqsDly++) {
+ if (Vref < (Data->Vnom - 1)) {
+ if (RdDqsDly == Data->DiamondLeft[(NBPtr->TotalMaxVrefRange - 2) - Vref]) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " | ");
+ } else if (RdDqsDly == Data->DiamondRight[(NBPtr->TotalMaxVrefRange - 2) - Vref]) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " | -> Width = %02x", (Data->DiamondRight[(NBPtr->TotalMaxVrefRange - 2) - Vref]) - (Data->DiamondLeft[(NBPtr->TotalMaxVrefRange - 2) - Vref]));
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, " ");
+ }
+ } else {
+ if (RdDqsDly == Data->DiamondLeft[Vref - (Data->Vnom - 1)]) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " | ");
+ } else if (RdDqsDly == Data->DiamondRight[Vref - (Data->Vnom - 1)]) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " | -> Width = %02x", (Data->DiamondRight[Vref - (Data->Vnom - 1)]) - (Data->DiamondLeft[Vref - (Data->Vnom - 1)]));
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, " ");
+ }
+ }
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t Convolution results after processing raw data:\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t Delay: ");
+ for (RdDqsDly = 0; RdDqsDly < NBPtr->TotalRdDQSDlyRange; RdDqsDly++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %02x ", RdDqsDly <= (Data->MaxRdDqsSweep - 1) ? (Data->MaxRdDqsSweep - 1) - RdDqsDly : (NBPtr->TotalRdDQSDlyRange - 1) - RdDqsDly);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tLane: %02x\n", Lane);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tConv: ");
+ for (RdDqsDly = 0; RdDqsDly < NBPtr->TotalRdDQSDlyRange; RdDqsDly++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", Data->Lane[Lane].Convolution[RdDqsDly]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ }
+ );
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function Examines the convolution function and determines the Max RDqs for
+ * 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return TRUE - No Errors occurred
+ * @return FALSE - Errors occurred
+ */
+
+BOOLEAN
+MemT2DRdDQSProcessConvolution (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ )
+{
+ UINT8 RdDqsDly;
+ UINT8 Lane;
+ UINT16 MaxFOM;
+ UINT8 MaxRange;
+ UINT8 CurrRange;
+ MEM_NB_BLOCK *NBPtr;
+ BOOLEAN status;
+
+ NBPtr = TechPtr->NBPtr;
+ status = TRUE;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tDetermining MaxRdDqs based on Convolution function\n");
+ // Determine the MaxRdDqs Dly for the convolution function
+ // - Choose the delay setting at the peak FOM value.
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ // Find largest value as MaxFOM
+ MaxFOM = 0;
+ for (RdDqsDly = 0; RdDqsDly < NBPtr->TotalRdDQSDlyRange; RdDqsDly++) {
+ if (Data->Lane[Lane].Convolution[RdDqsDly] > MaxFOM) {
+ MaxFOM = Data->Lane[Lane].Convolution[RdDqsDly];
+ }
+ }
+ status = MaxFOM > 0 ? TRUE : FALSE; // It is an error if all convolution points are zero
+
+ // Then find the midpoint of the largest consecutive window w/ that MaxFOM
+ // In cases of an even number of consecutive points w/ that MaxFOM exists,
+ // choose the midpoint to the right
+ // All things being equal, favor the right side of a bi-modal eye
+ // Stressful SSO patterns shift the eye right!
+ MaxRange = 0;
+ CurrRange = 0;
+ for (RdDqsDly = 0; (MaxFOM > 0) && RdDqsDly < NBPtr->TotalRdDQSDlyRange; RdDqsDly++) {
+ if (Data->Lane[Lane].Convolution[RdDqsDly] == MaxFOM) {
+ CurrRange++;
+ if (CurrRange >= MaxRange) {
+ Data->Lane[Lane].MaxRdDqs = RdDqsDly - ((CurrRange - 1) / 2);
+ MaxRange = CurrRange;
+ }
+ } else {
+ CurrRange = 0;
+ }
+ }
+
+ if (Data->Lane[Lane].MaxRdDqs > Data->MaxRdDqsSweep) {
+ status = FALSE; // Error
+ }
+ // Set Actual register value
+ if (Data->Lane[Lane].MaxRdDqs < Data->MaxRdDqsSweep) {
+ Data->Lane[Lane].MaxRdDqs = (Data->MaxRdDqsSweep - 1) - Data->Lane[Lane].MaxRdDqs;
+ } else {
+ status = FALSE; // Error
+ }
+ }
+
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Lane: ");
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", Lane);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tMaxRdDqs: ");
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", Data->Lane[Lane].MaxRdDqs);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ );
+
+ if (status == FALSE) {
+ SetMemError (AGESA_FATAL, NBPtr->MCTPtr);
+ PutEventLog (AGESA_FATAL, MEM_ERROR_INVALID_2D_RDDQS_VALUE, 0, 0, 0, 0, &TechPtr->NBPtr->MemPtr->StdHeader);
+ }
+ return status;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs the Max RDqs for 2D RdDQS training from convolution
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return TRUE - No Errors occurred
+ * @return FALSE - Errors occurred
+ */
+BOOLEAN
+MemT2DRdDQSPrograMaxRdDQSDly (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ )
+{
+ UINT8 Lane;
+ UINT8 LaneHighRdDqs2dDlys;
+ UINT8 LaneLowRdDqs2dDlys;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tProgramming MaxRdDysDly per Lane\n\n");
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ if ((TechPtr->NBPtr->ChannelPtr->DimmNibbleAccess & (1 << (TechPtr->ChipSel >> 1))) == 0) {
+ // Program Byte based for x8 and x16
+ TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRdDqsDly, DIMM_BYTE_ACCESS ((TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay), Lane), (UINT16)Data->Lane[Lane].MaxRdDqs);
+ TechPtr->NBPtr->ChannelPtr->RdDqsDlys[(TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) * MAX_DELAYS + Lane] = Data->Lane[Lane].MaxRdDqs;
+ } else {
+ // Program nibble based x4, so use "Nibble"
+ TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRdDqs2dDly, DIMM_NBBL_ACCESS ((TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay), Lane), (UINT16)Data->Lane[Lane].MaxRdDqs);
+ TechPtr->NBPtr->ChannelPtr->RdDqs2dDlys[(TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) * MAX_NUMBER_LANES + Lane] = Data->Lane[Lane].MaxRdDqs;
+ // For each pair of nibbles (high (Odd Nibble) and Low (Even nibble)), find the largest and use that as the RdDqsDly value
+ if ((Lane & 0x1) == 0) {
+ LaneHighRdDqs2dDlys = Data->Lane[Lane + 1].MaxRdDqs;
+ LaneLowRdDqs2dDlys = Data->Lane[Lane].MaxRdDqs;
+ if (LaneHighRdDqs2dDlys > LaneLowRdDqs2dDlys) {
+ TechPtr->NBPtr->ChannelPtr->RdDqsDlys[(TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) * MAX_DELAYS + (Lane >> 1)] = LaneHighRdDqs2dDlys;
+ } else {
+ TechPtr->NBPtr->ChannelPtr->RdDqsDlys[(TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) * MAX_DELAYS + (Lane >> 1)] = LaneLowRdDqs2dDlys;
+ }
+ }
+ TechPtr->NBPtr->DctCachePtr->Is2Dx4 = TRUE;
+ }
+ }
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finds the Positive and negative Vref Margin for the current CS
+ * for 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return TRUE - No Errors occurred
+ * @return FALSE - Errors occurred
+ */
+BOOLEAN
+MemT2DRdDQSFindCsVrefMargin (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ )
+{
+ UINT8 SmallestMaxVrefNeg;
+ UINT8 Lane;
+ UINT8 RdDqsDly;
+ UINT8 Vref;
+ UINT8 MaxVrefPositive;
+ UINT8 MaxVrefNegative;
+ UINT8 SmallestMaxVrefPos;
+ UINT32 PosNegData;
+ SmallestMaxVrefPos = 0xFF;
+ SmallestMaxVrefNeg = 0;
+ MaxVrefPositive = 0;
+ MaxVrefNegative = 0xFF;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFinding Smallest Max Positive and Negative Vref\n\n");
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ RdDqsDly = (Data->MaxRdDqsSweep - 1) - Data->Lane[Lane].MaxRdDqs;
+ for (Vref = 0; Vref < (Data->Vnom - 1); Vref++) {
+ // Neg Vref - (searching from top of array down)
+ PosNegData = Data->Lane[Lane].Vref[Vref].PosRdDqsDly;
+ if ((UINT8) ((PosNegData >> RdDqsDly) & 0x1) == 1) {
+ MaxVrefNegative = Vref;
+ break;
+ }
+ TechPtr->NBPtr->FamilySpecificHook[Adjust2DVrefStepSize] (TechPtr->NBPtr, &Vref);
+ }
+ for (Vref = (Data->Vnom - 1); Vref < (TechPtr->NBPtr->TotalMaxVrefRange - 1); Vref++) {
+ // Pos Vref - (searching from Vnom + 1 of array down)
+ PosNegData = Data->Lane[Lane].Vref[Vref].PosRdDqsDly;
+ if ((UINT8) ((PosNegData >> RdDqsDly) & 0x1) == 0) {
+ // Convert to register setting
+ MaxVrefPositive = Vref - 1;// - Data->Vnom;
+ break;
+ } else {
+ // If Vref = 1F passes, then smallest Vref = 0x1F
+ if (Vref == ((TechPtr->NBPtr->TotalMaxVrefRange - 1) - 1)) {
+ MaxVrefPositive = 0x1E;
+ break;
+ }
+ }
+ TechPtr->NBPtr->FamilySpecificHook[Adjust2DVrefStepSize] (TechPtr->NBPtr, &Vref);
+ }
+ if (MaxVrefPositive < SmallestMaxVrefPos) {
+ // Find the smallest Max Pos Vref
+ SmallestMaxVrefPos = MaxVrefPositive;
+ }
+ if (MaxVrefNegative > SmallestMaxVrefNeg) {
+ // Find the largest Max Neg Vref
+ SmallestMaxVrefNeg = MaxVrefNegative;
+ }
+ }
+ if (SmallestMaxVrefPos != (Data->Vnom - 2)) {
+ Data->SmallestPosMaxVrefperCS[TechPtr->ChipSel] = SmallestMaxVrefPos - Data->Vnom + 1;
+ } else {
+ Data->SmallestPosMaxVrefperCS[TechPtr->ChipSel] = 0;
+ }
+ Data->SmallestNegMaxVrefperCS[TechPtr->ChipSel] = (Data->Vnom - 1) - SmallestMaxVrefNeg;
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "Smallest Max Positive Vref Offset from V-Nom for ChipSel %02x = + %02x\n", TechPtr->ChipSel, Data->SmallestPosMaxVrefperCS[TechPtr->ChipSel]);
+ if (Data->SmallestPosMaxVrefperCS[TechPtr->ChipSel] == 0) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "Smallest Max Negative Vref Offset from V-Nom for ChipSel %02x = 00\n");
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, "Smallest Max Negative Vref Offset from V-Nom for ChipSel %02x = - %02x\n", TechPtr->ChipSel, Data->SmallestNegMaxVrefperCS[TechPtr->ChipSel]);
+ }
+ );
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finds the final Vref Margin for 2D RdDQS training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return TRUE - No Errors occurred
+ * @return FALSE - Errors occurred
+ */
+BOOLEAN
+MemT2DRdDQSFinalVrefMargin (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ )
+{
+ UINT8 ChipSel;
+ UINT8 SmallestMaxPosVref;
+ UINT8 SmallestMaxNegVref;
+ UINT8 OffsetFromVref;
+ UINT8 MaxRegVref;
+ SmallestMaxNegVref = 0x7F;
+ SmallestMaxPosVref = 0x7F;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFinding Final Vref for channel\n\n");
+ for (ChipSel = 0; ChipSel < TechPtr->NBPtr->CsPerChannel; ChipSel = ChipSel + TechPtr->NBPtr->CsPerDelay ) {
+ if ( (TechPtr->NBPtr->MCTPtr->Status[SbLrdimms]) ? ((TechPtr->NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0) :
+ ((TechPtr->NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) 1 << ChipSel)) != 0) ) {
+ if (Data->SmallestPosMaxVrefperCS[ChipSel] < SmallestMaxPosVref) {
+ SmallestMaxPosVref = Data->SmallestPosMaxVrefperCS[ChipSel];
+ }
+ if (Data->SmallestNegMaxVrefperCS[ChipSel] < SmallestMaxNegVref) {
+ SmallestMaxNegVref = Data->SmallestNegMaxVrefperCS[ChipSel];
+ }
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "Final Max Vref Offset From Vnom =");
+ if (SmallestMaxPosVref > SmallestMaxNegVref) {
+ OffsetFromVref = (SmallestMaxPosVref - SmallestMaxNegVref) / 2;
+ if (OffsetFromVref != 0) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " + ");
+ }
+ TechPtr->NBPtr->ChannelPtr->MaxVref = (Data->Vnom - 1) + OffsetFromVref;
+ } else {
+ OffsetFromVref = (SmallestMaxNegVref - SmallestMaxPosVref) / 2;
+ if (OffsetFromVref != 0) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " - ");
+ }
+ TechPtr->NBPtr->ChannelPtr->MaxVref = (Data->Vnom - 1) - OffsetFromVref;
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x \n", OffsetFromVref);
+ MaxRegVref = TechPtr->NBPtr->ChannelPtr->MaxVref;
+ if (MaxRegVref <= ((TechPtr->NBPtr->TotalMaxVrefRange / 2) - 1)) {
+ MaxRegVref = (TechPtr->NBPtr->TotalMaxVrefRange - 1) - MaxRegVref;
+ } else {
+ MaxRegVref = MaxRegVref - (TechPtr->NBPtr->TotalMaxVrefRange / 2 - 1);
+ }
+ /// @todo: Need Family specific hook for MaxRegVref
+ MaxRegVref = ((MaxRegVref * 2) & 0x3F);
+ IDS_HDT_CONSOLE (MEM_FLOW, "Actual Max Vref programmed = %02x \n", MaxRegVref);
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function displays ther results of the 2D search
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *Data - Pointer to Result data structure
+ *
+ * @return
+ */
+VOID
+MemT2DRdDqsDisplaySearch (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ )
+{
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ UINT8 Lane;
+ INT8 Vref;
+ // Display data collected
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tDisplaying Data collected\n\n");
+ for (Lane = 0; Lane < MemT2DGetMaxLanes (TechPtr); Lane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tLane: %02x\n", Lane);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t Vref NegRdDqs PosRdDqs\n");
+ for (Vref = TechPtr->NBPtr->TotalMaxVrefRange - 2; Vref >= 0; Vref--) {
+ if (Vref < (Data->Vnom - 1)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t - ");
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", ((Data->Vnom -1) - Vref));
+ } else if (Vref == (Data->Vnom - 1)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t 00 ");
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t + ");
+ IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", Vref - (Data->Vnom - 1));
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "%08x", TechPtr->Local2DData->Lane[Lane].Vref[Vref].NegRdDqsDly); // debug
+ IDS_HDT_CONSOLE (MEM_FLOW, "%08x \n", TechPtr->Local2DData->Lane[Lane].Vref[Vref].PosRdDqsDly); //debug
+ TechPtr->NBPtr->FamilySpecificHook[Adjust2DVrefStepSize] (TechPtr->NBPtr, &Vref);
+ }
+ }
+ )
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttdimbt.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttdimbt.c
new file mode 100644
index 0000000..97ca08d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttdimbt.c
@@ -0,0 +1,1478 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttdimmbt.c
+ *
+ * Technology Dimm Based Training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "GeneralServices.h"
+#include "heapManager.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MTTDIMBT_FILECODE
+
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemTInitDqsPos4RcvrEnByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+STATIC
+MemTSetRcvrEnDlyByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver,
+ IN UINT16 RcvEnDly
+ );
+
+VOID
+STATIC
+MemTLoadRcvrEnDlyByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver
+ );
+
+BOOLEAN
+STATIC
+MemTSaveRcvrEnDlyByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver,
+ IN UINT16 RcvEnDly,
+ IN UINT16 CmpResultRank0,
+ IN UINT16 CmpResultRank1
+ );
+
+VOID
+STATIC
+MemTResetDctWrPtrByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver
+ );
+
+UINT16
+STATIC
+MemTCompare1ClPatternByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[]
+ );
+
+VOID
+STATIC
+MemTSkipChipSelPass1Byte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT UINT8 *ChipSelPtr
+ );
+
+VOID
+STATIC
+MemTSkipChipSelPass2Byte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT UINT8 *ChipSelPtr
+ );
+
+UINT8
+STATIC
+MemTMaxByteLanesByte ( VOID );
+
+UINT8
+STATIC
+MemTDlyTableWidthByte ( VOID );
+
+VOID
+STATIC
+MemTSetDqsDelayCsrByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 ByteLane,
+ IN UINT8 Dly
+ );
+
+VOID
+STATIC
+MemTDqsWindowSaveByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 ByteLane,
+ IN UINT8 DlyMin,
+ IN UINT8 DlyMax
+ );
+
+BOOLEAN
+STATIC
+MemTFindMaxRcvrEnDlyByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ OUT UINT8 *ChipSel
+ );
+
+UINT16
+STATIC
+MemTCompare1ClPatternOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT8 Side,
+ IN UINT8 Receiver,
+ IN BOOLEAN Side1En
+ );
+
+VOID
+STATIC
+MemTLoadRcvrEnDlyOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver
+ );
+
+VOID
+STATIC
+MemTSetRcvrEnDlyOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver,
+ IN UINT16 RcvEnDly
+ );
+
+VOID
+STATIC
+MemTLoadInitialRcvEnDlyOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver
+ );
+
+UINT8
+STATIC
+MemTFindMinMaxGrossDlyByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN TRN_DLY_TYPE TrnDlyType,
+ IN BOOLEAN IfMax
+ );
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function enables byte based training if called
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTDimmByteTrainInit (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 Dct;
+ UINT8 Channel;
+ UINT8 DctCount;
+ UINT8 ChannelCount;
+ DIE_STRUCT *MCTPtr;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MCTPtr = NBPtr->MCTPtr;
+
+ ASSERT ((NBPtr->CsPerDelay == 1) || (NBPtr->CsPerDelay == 2));
+
+ TechPtr->InitDQSPos4RcvrEn = MemTInitDqsPos4RcvrEnByte;
+ TechPtr->SetRcvrEnDly = MemTSetRcvrEnDlyByte;
+ TechPtr->LoadRcvrEnDly = MemTLoadRcvrEnDlyByte;
+ TechPtr->SaveRcvrEnDly = MemTSaveRcvrEnDlyByte;
+ TechPtr->SaveRcvrEnDlyFilter = MemTSaveRcvrEnDlyByteFilterOpt;
+ TechPtr->ResetDCTWrPtr = MemTResetDctWrPtrByte;
+ TechPtr->Compare1ClPattern = MemTCompare1ClPatternByte;
+ TechPtr->SkipChipSelPass1 = MemTSkipChipSelPass1Byte;
+ TechPtr->SkipChipSelPass2 = MemTSkipChipSelPass2Byte;
+ TechPtr->MaxByteLanes = MemTMaxByteLanesByte;
+ TechPtr->DlyTableWidth = MemTDlyTableWidthByte;
+ TechPtr->SetDQSDelayCSR = MemTSetDqsDelayCsrByte;
+ TechPtr->DQSWindowSave = MemTDqsWindowSaveByte;
+ TechPtr->FindMaxDlyForMaxRdLat = MemTFindMaxRcvrEnDlyByte;
+ TechPtr->Compare1ClPatternOpt = MemTCompare1ClPatternOptByte;
+ TechPtr->LoadRcvrEnDlyOpt = MemTLoadRcvrEnDlyOptByte;
+ TechPtr->SetRcvrEnDlyOpt = MemTSetRcvrEnDlyOptByte;
+ TechPtr->InitializeVariablesOpt = MemTInitializeVariablesOptByte;
+ TechPtr->GetMaxValueOpt = MemTGetMaxValueOptByte;
+ TechPtr->SetSweepErrorOpt = MemTSetSweepErrorOptByte;
+ TechPtr->CheckRcvrEnDlyLimitOpt = MemTCheckRcvrEnDlyLimitOptByte;
+ TechPtr->LoadInitialRcvrEnDlyOpt = MemTLoadInitialRcvEnDlyOptByte;
+ TechPtr->GetMinMaxGrossDly = MemTFindMinMaxGrossDlyByte;
+ // Dynamically allocate buffers for storing trained timings.
+ DctCount = MCTPtr->DctCount;
+ ChannelCount = MCTPtr->DctData[0].ChannelCount;
+ AllocHeapParams.RequestedBufferSize = ((DctCount * ChannelCount) *
+ ((MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES) +
+ (MAX_DELAYS * MAX_CS_PER_CHANNEL * NUMBER_OF_FAILURE_MASK_TABLES) +
+ (MAX_DIMMS * MAX_NUMBER_LANES)
+ )
+ );
+
+ if (NBPtr->MemPstateStage == MEMORY_PSTATE_1ST_STAGE) {
+ AllocHeapParams.RequestedBufferSize *= 2;
+ }
+
+ AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_TRN_DATA_HANDLE, MCTPtr->NodeId, 0, 0);
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ if (HeapAllocateBuffer (&AllocHeapParams, &NBPtr->MemPtr->StdHeader) == AGESA_SUCCESS) {
+ for (Dct = 0; Dct < DctCount; Dct++) {
+ for (Channel = 0; Channel < ChannelCount; Channel++) {
+ MCTPtr->DctData[Dct].ChData[Channel].RowCount = MAX_DIMMS;
+ MCTPtr->DctData[Dct].ChData[Channel].ColumnCount = MAX_DELAYS;
+
+ MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2;
+ MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqsDlys = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].WrDatDlys = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqs2dDlys = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_NUMBER_LANES);
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqsMinDlys = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqsMaxDlys = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].WrDatMinDlys = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].WrDatMaxDlys = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].FailingBitMask = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_CS_PER_CHANNEL * MAX_DELAYS);
+ if (NBPtr->MemPstateStage == MEMORY_PSTATE_1ST_STAGE) {
+ MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlysMemPs1 = (UINT16 *) AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2;
+ MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlysMemPs1 = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqsDlysMemPs1 = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].WrDatDlysMemPs1 = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqs2dDlysMemPs1 = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_NUMBER_LANES);
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqsMinDlysMemPs1 = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].RdDqsMaxDlysMemPs1 = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].WrDatMinDlysMemPs1 = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].WrDatMaxDlysMemPs1 = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS);
+ MCTPtr->DctData[Dct].ChData[Channel].FailingBitMaskMemPs1 = AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += (MAX_CS_PER_CHANNEL * MAX_DELAYS);
+
+ }
+ }
+ }
+ } else {
+ PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_FATAL, MCTPtr);
+ ASSERT(FALSE); // Could not dynamically allocate buffers for storing trained timings
+ }
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function initializes the DQS Positions in preparation for Receiver Enable Training.
+ * Write Position is no delay, Read Position is 1/2 Memclock delay
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+STATIC
+MemTInitDqsPos4RcvrEnByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 Dimm;
+ UINT8 ByteLane;
+ UINT8 WrDqs;
+
+ for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+ for (ByteLane = 0; ByteLane < MAX_DELAYS; ByteLane++) {
+ WrDqs = TechPtr->NBPtr->ChannelPtr->WrDqsDlys[(Dimm * MAX_DELAYS) + ByteLane];
+ TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqs);
+ TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRdDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), 0x3F);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs DqsRcvEnDly to additional index for DQS receiver enabled training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Receiver - Current Chip select value
+ * @param[in] RcvEnDly - receiver enable delay to be saved
+ */
+
+VOID
+STATIC
+MemTSetRcvrEnDlyByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver,
+ IN UINT16 RcvEnDly
+ )
+{
+ UINT8 ByteLane;
+
+ ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+ for (ByteLane = 0; ByteLane < MAX_BYTELANES; ByteLane++) {
+ TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver >> 1, ByteLane), RcvEnDly);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function loads the DqsRcvEnDly from saved data and program to additional index
+ * for DQS receiver enabled training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Receiver - Current Chip select value
+ *
+ */
+
+VOID
+STATIC
+MemTLoadRcvrEnDlyByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver
+ )
+{
+ UINT8 i;
+ UINT8 Dimm;
+ UINT16 Saved;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+ ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+ Dimm = Receiver >> 1;
+ Saved = TechPtr->DqsRcvEnSaved;
+ for (i = 0; i < MAX_BYTELANES; i++) {
+ if (Saved & 1) {
+ TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver >> 1, i),
+ ChannelPtr->RcvEnDlys[Dimm * MAX_DELAYS + i]);
+ }
+ Saved >>= 1;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function saves passing DqsRcvEnDly values to the stack
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Receiver - Current Chip select value
+ * @param[in] RcvEnDly - receiver enable delay to be saved
+ * @param[in] CmpResultRank0 - compare result for Rank 0
+ * @param[in] CmpResultRank1 - compare result for Rank 1
+ *
+ * @return TRUE - All bytelanes pass
+ * @return FALSE - Some bytelanes fail
+ */
+
+BOOLEAN
+STATIC
+MemTSaveRcvrEnDlyByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver,
+ IN UINT16 RcvEnDly,
+ IN UINT16 CmpResultRank0,
+ IN UINT16 CmpResultRank1
+ )
+{
+ UINT8 i;
+ UINT8 Passed;
+ UINT8 Saved;
+ UINT8 Mask;
+ UINT8 Dimm;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+ ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+ Passed = (UINT8) ((CmpResultRank0 & CmpResultRank1) & 0xFF);
+
+ Saved = (UINT8) (TechPtr->DqsRcvEnSaved & Passed); //@attention - false passes filter (subject to be replaced with a better solution)
+ Dimm = Receiver >> 1;
+ Mask = 1;
+ for (i = 0; i < MAX_BYTELANES; i++) {
+ if (Passed & Mask) {
+ if (!(Saved & Mask)) {
+ ChannelPtr->RcvEnDlys[Dimm * MAX_DELAYS + i] = RcvEnDly + 0x20; // @attention -1 pass only
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tBL %d = %02x", i, RcvEnDly + 0x20);
+ }
+ Saved |= Mask;
+ }
+ Mask <<= 1;
+ }
+ TechPtr->DqsRcvEnSaved = Saved;
+
+ if (Saved == 0xFF) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function performs a filtering functionality and saves passing DqsRcvEnDly
+ * values to the stack
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Receiver - Current Chip select value
+ * @param[in] RcvEnDly - receiver enable delay to be saved
+ * @param[in] CmpResultRank0 - compare result for Rank 0
+ * @param[in] CmpResultRank1 - compare result for Rank 1
+ *
+ * @return TRUE - All bytelanes pass
+ * @return FALSE - Some bytelanes fail
+ */
+
+BOOLEAN
+MemTSaveRcvrEnDlyByteFilter (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver,
+ IN UINT16 RcvEnDly,
+ IN UINT16 CmpResultRank0,
+ IN UINT16 CmpResultRank1
+ )
+{
+ UINT8 i;
+ UINT8 Passed;
+ UINT8 Saved;
+ UINT8 Mask;
+ UINT8 Dimm;
+ UINT8 MaxFilterDly;
+ CH_DEF_STRUCT *ChannelPtr;
+ MEM_DCT_CACHE *DctCachePtr;
+
+ ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+ ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+ DctCachePtr = TechPtr->NBPtr->DctCachePtr;
+
+ MaxFilterDly = TechPtr->MaxFilterDly;
+ Passed = (UINT8) ((CmpResultRank0 & CmpResultRank1) & 0xFF);
+
+ Dimm = Receiver >> 1;
+ Saved = (UINT8) TechPtr->DqsRcvEnSaved;
+ Mask = 1;
+ for (i = 0; i < MAX_BYTELANES; i++) {
+ if ((Passed & Mask) != 0) {
+ DctCachePtr->RcvEnDlyCounts [i] += 1;
+ if ((Saved & Mask) == 0) {
+ ChannelPtr->RcvEnDlys[Dimm * MAX_DELAYS + i] = RcvEnDly + 0x20;
+ Saved |= Mask;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tBL %d = %02x", i, RcvEnDly + 0x20);
+ }
+ } else {
+ if (DctCachePtr->RcvEnDlyCounts [i] <= MaxFilterDly) {
+ DctCachePtr->RcvEnDlyCounts [i] = 0;
+ Saved &= ~Mask;
+ }
+ }
+ Mask <<= 1;
+ }
+
+ //-----------------------
+ TechPtr->DqsRcvEnSaved = (UINT16) Saved;
+
+ Saved = 0;
+ for (i = 0; i < MAX_BYTELANES; i++) {
+ if (DctCachePtr->RcvEnDlyCounts [i] >= MaxFilterDly) {
+ Saved |= (UINT8) 1 << i;
+ }
+ }
+
+ if (Saved == 0xFF) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function compares test pattern with data in buffer and return a pass/fail bitmap
+ * for 8 Bytes
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Buffer[] - Buffer data from DRAM (Measured data from DRAM) to compare
+ * @param[in] Pattern[] - Pattern (Expected data in ROM/CACHE) to compare against
+ *
+ * @return PASS - Bit map of results of comparison
+ */
+
+UINT16
+STATIC
+MemTCompare1ClPatternByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[]
+ )
+{
+ UINT16 i;
+ UINT16 j;
+ UINT16 Pass;
+ DIE_STRUCT *MCTPtr;
+
+ MCTPtr = TechPtr->NBPtr->MCTPtr;
+ if (MCTPtr->GangedMode && MCTPtr->Dct) {
+ j = 8;
+ } else {
+ j = 0;
+ }
+
+ Pass = 0xFFFF;
+ IDS_HDT_CONSOLE (MEM_FLOW, " -");
+ for (i = 0; i < 8; i++) {
+ if (Buffer[j] != Pattern[j]) {
+ // if bytelane n fails
+ Pass &= ~((UINT16)1 << (j % 8)); // clear bit n
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c", (Buffer[j] == Pattern[j]) ? 'P' : '.');
+ j++;
+ }
+
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t -");
+ for (i = 0, j -= 8; i < 8; i++, j++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %02x", Buffer[j]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t -");
+ for (i = 0, j -= 8; i < 8; i++, j++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %02x", Pattern[j]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+ );
+
+ return Pass;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * The function resets the DCT input buffer write pointer.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Receiver - Chip select
+ *
+ */
+
+VOID
+STATIC
+MemTResetDctWrPtrByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver
+ )
+{
+ UINT8 i;
+ UINT16 RcvEnDly;
+
+ ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+ for (i = 0; i < MAX_BYTELANES; i++) {
+ RcvEnDly = (UINT16) TechPtr->NBPtr->GetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver / 2, i));
+ TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver / 2, i), RcvEnDly);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function skips odd chip select if training at 800MT or above.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] *ChipSelPtr - Pointer to variable contains Chip select index
+ *
+ */
+
+VOID
+STATIC
+MemTSkipChipSelPass1Byte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT UINT8 *ChipSelPtr
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ // if the even chip select failed training, need to set CsTrainFail for odd chip select if present.
+ if (NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ((*ChipSelPtr) + 1))) {
+ if (NBPtr->DCTPtr->Timings.CsTrainFail & ((UINT16)1 << *ChipSelPtr)) {
+ NBPtr->DCTPtr->Timings.CsTrainFail |= (UINT16)1 << ((*ChipSelPtr) + 1);
+ if (!NBPtr->MemPtr->ErrorHandling (NBPtr->MCTPtr, NBPtr->Dct, NBPtr->DCTPtr->Timings.CsTrainFail, &NBPtr->MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ }
+ }
+ }
+ (*ChipSelPtr)++;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * MemTSkipChipSelPass2Byte:
+ *
+ * This function skips odd chip select if training at 800MT or above.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in,out] *ChipSelPtr - Pointer to variable contains Chip select index
+ *
+ */
+
+VOID
+STATIC
+MemTSkipChipSelPass2Byte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT UINT8 *ChipSelPtr
+ )
+{
+ if (*ChipSelPtr & 1) {
+ *ChipSelPtr = MAX_CS_PER_CHANNEL; // skip all successions
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determines the maximum number of byte lanes
+ *
+ * @return Max number of Bytelanes
+ */
+
+UINT8
+STATIC
+MemTMaxByteLanesByte ( VOID )
+{
+ return MAX_BYTELANES;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determines the width of the delay tables (eg. RcvEnDlys, WrDqsDlys,...)
+ *
+ * @return Delay table width in bytes
+ */
+
+UINT8
+STATIC
+MemTDlyTableWidthByte ( VOID )
+{
+ return MAX_DELAYS;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function writes the Delay value to a certain byte lane
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] ByteLane - Bytelane number being targeted
+ * @param[in] Dly - Delay value
+ *
+ */
+
+VOID
+STATIC
+MemTSetDqsDelayCsrByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 ByteLane,
+ IN UINT8 Dly
+ )
+{
+ UINT8 Reg;
+ UINT8 Dimm;
+
+ ASSERT (ByteLane <= MAX_BYTELANES);
+
+ if (!(TechPtr->DqsRdWrPosSaved & ((UINT8)1 << ByteLane))) {
+ Dimm = TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay;
+
+ if (TechPtr->Direction == DQS_WRITE_DIR) {
+ Dly = Dly + ((UINT8) TechPtr->NBPtr->ChannelPtr->WrDqsDlys[(Dimm * MAX_DELAYS) + ByteLane]);
+ Reg = AccessWrDatDly;
+ } else {
+ Reg = AccessRdDqsDly;
+ }
+
+ TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, Reg, DIMM_BYTE_ACCESS (Dimm, ByteLane), Dly);
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs the trained DQS delay for the specified byte lane
+ * and stores its DQS window for reference.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] ByteLane - Bytelane number being targeted
+ * @param[in] DlyMin - Minimum delay value
+ * @param[in] DlyMax- Maximum delay value
+ *
+ */
+
+VOID
+STATIC
+MemTDqsWindowSaveByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 ByteLane,
+ IN UINT8 DlyMin,
+ IN UINT8 DlyMax
+ )
+{
+ UINT8 DqsDelay;
+ UINT8 Dimm;
+ CH_DEF_STRUCT *ChanPtr;
+
+ ASSERT (ByteLane <= MAX_BYTELANES);
+ ChanPtr = TechPtr->NBPtr->ChannelPtr;
+
+ DqsDelay = ((DlyMin + DlyMax + 1) / 2) & 0x3F;
+ MemTSetDqsDelayCsrByte (TechPtr, ByteLane, DqsDelay);
+ TechPtr->DqsRdWrPosSaved |= (UINT8)1 << ByteLane;
+ TechPtr->DqsRdWrPosSaved |= 0xFF00;
+
+ Dimm = (TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) * MAX_DELAYS + ByteLane;
+ if (TechPtr->Direction == DQS_READ_DIR) {
+ ChanPtr->RdDqsDlys[Dimm] = DqsDelay;
+ } else {
+ ChanPtr->WrDatDlys[Dimm] = DqsDelay + ChanPtr->WrDqsDlys[Dimm];
+ }
+
+ if (TechPtr->Direction == DQS_READ_DIR) {
+ ChanPtr->RdDqsMinDlys[ByteLane] = DlyMin;
+ ChanPtr->RdDqsMaxDlys[ByteLane] = DlyMax;
+ } else {
+ ChanPtr->WrDatMinDlys[ByteLane] = DlyMin;
+ ChanPtr->WrDatMaxDlys[ByteLane] = DlyMax;
+ }
+
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finds the DIMM that has the largest receiver enable delay.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[out] *ChipSel - Pointer to the Chip select that has the largest receiver enable delay.
+ *
+ * @return TRUE - A chip select can be found.
+ * @return FALSE - A chip select cannot be found.
+ */
+
+BOOLEAN
+STATIC
+MemTFindMaxRcvrEnDlyByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ OUT UINT8 *ChipSel
+ )
+{
+ UINT8 ChipSelect;
+ UINT8 ByteLane;
+ UINT16 RcvEnDly;
+ UINT16 MaxDly;
+ UINT8 MaxDlyCs;
+ BOOLEAN RetVal;
+
+ MEM_NB_BLOCK *NBPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ ChannelPtr = NBPtr->ChannelPtr;
+
+ RetVal = FALSE;
+ MaxDly = 0;
+ MaxDlyCs = 0;
+ for (ChipSelect = 0; ChipSelect < NBPtr->CsPerChannel; ChipSelect = ChipSelect + NBPtr->CsPerDelay) {
+ if ((NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSelect)) != 0) {
+ if ((NBPtr->DCTPtr->Timings.CsTrainFail & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSelect)) == 0) {
+ // Only choose the dimm that does not fail training
+ for (ByteLane = 0; ByteLane < ((NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8); ByteLane++) {
+ RcvEnDly = ChannelPtr->RcvEnDlys[ChipSelect / NBPtr->CsPerDelay * MAX_DELAYS + ByteLane];
+ if (RcvEnDly > MaxDly) {
+ MaxDly = RcvEnDly;
+ MaxDlyCs = ChipSelect;
+ RetVal = TRUE;
+ }
+ }
+ }
+ }
+ }
+
+ if (NBPtr->MCTPtr->Status[Sb128bitmode] != 0) {
+ //The RcvrEnDlys of DCT1 DIMMs should also be considered while ganging.
+ NBPtr->SwitchDCT (NBPtr, 1);
+ ChannelPtr = NBPtr->ChannelPtr;
+ for (ChipSelect = 0; ChipSelect < NBPtr->CsPerChannel; ChipSelect = ChipSelect + NBPtr->CsPerDelay) {
+ for (ByteLane = 0; ByteLane < ((NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8); ByteLane++) {
+ RcvEnDly = ChannelPtr->RcvEnDlys[ChipSelect / NBPtr->CsPerDelay * MAX_DELAYS + ByteLane];
+ if (RcvEnDly > MaxDly) {
+ MaxDly = RcvEnDly;
+ MaxDlyCs = ChipSelect;
+ }
+ }
+ }
+ NBPtr->SwitchDCT (NBPtr, 0);
+ }
+
+ TechPtr->MaxDlyForMaxRdLat = MaxDly;
+ *ChipSel = MaxDlyCs;
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finds the DIMM that has the largest receiver enable delay + Read DQS Delay.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[out] *ChipSel - Pointer to the Chip select that has the largest receiver enable delay
+ * + Read DQS Delay.
+ *
+ * @return TRUE - A chip select can be found.
+ * @return FALSE - A chip select cannot be found.
+ */
+
+BOOLEAN
+MemTFindMaxRcvrEnDlyRdDqsDlyByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ OUT UINT8 *ChipSel
+ )
+{
+ UINT8 ChipSelect;
+ UINT8 ByteLane;
+ UINT16 RcvEnDly;
+ UINT16 RdDqsDly;
+ UINT16 TotalDly;
+ UINT16 MaxDly;
+ UINT8 MaxDlyCs;
+ BOOLEAN RetVal;
+
+ MEM_NB_BLOCK *NBPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ ChannelPtr = NBPtr->ChannelPtr;
+
+ RetVal = FALSE;
+ MaxDly = 0;
+ MaxDlyCs = 0;
+ for (ChipSelect = 0; ChipSelect < NBPtr->CsPerChannel; ChipSelect = ChipSelect + NBPtr->CsPerDelay) {
+ if ((NBPtr->DCTPtr->Timings.CsTrainFail & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSelect)) == 0) {
+ // Only choose the dimm that does not fail training
+ for (ByteLane = 0; ByteLane < MAX_BYTELANES; ByteLane++) {
+ RcvEnDly = ChannelPtr->RcvEnDlys[ChipSelect / NBPtr->CsPerDelay * MAX_DELAYS + ByteLane];
+ // Before Dqs Position Training, this value is 0. So the maximum value for
+ // RdDqsDly needs to be added later when calculating the MaxRdLatency value
+ // after RcvEnDly training but before DQS Position Training.
+ RdDqsDly = ChannelPtr->RdDqsDlys[ChipSelect / NBPtr->CsPerDelay * MAX_DELAYS + ByteLane];
+ TotalDly = RcvEnDly + (RdDqsDly >> 1);
+ if (TotalDly > MaxDly) {
+ MaxDly = TotalDly;
+ MaxDlyCs = ChipSelect;
+ RetVal = TRUE;
+ }
+ }
+ }
+ }
+
+ TechPtr->MaxDlyForMaxRdLat = MaxDly;
+ *ChipSel = MaxDlyCs;
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finds the DIMM that has the largest receiver enable delay + Read DQS Delay for UNB
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[out] *ChipSel - Pointer to the Chip select that has the largest receiver enable delay
+ * + Read DQS Delay.
+ *
+ * @return TRUE - A chip select can be found.
+ * @return FALSE - A chip select cannot be found.
+ */
+
+BOOLEAN
+MemTFindMaxRcvrEnDlyRdDqsDlyByteUnb (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ OUT UINT8 *ChipSel
+ )
+{
+ UINT8 ChipSelect;
+ UINT8 ByteLane;
+ UINT16 RcvEnDly;
+ UINT16 RdDqsDly;
+ UINT16 TotalDly;
+ UINT16 MaxDly;
+ UINT8 MaxDlyCs;
+ BOOLEAN RetVal;
+ UINT16 *RcvEnDlyPtr;
+ UINT8 *RdDqsDlyPtr;
+
+ MEM_NB_BLOCK *NBPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ ChannelPtr = NBPtr->ChannelPtr;
+ RcvEnDlyPtr = ChannelPtr->RcvEnDlys;
+ RdDqsDlyPtr = ChannelPtr->RdDqsDlys;
+ if (NBPtr->MemPstate == MEMORY_PSTATE1) {
+ RcvEnDlyPtr = ChannelPtr->RcvEnDlysMemPs1;
+ RdDqsDlyPtr = ChannelPtr->RdDqsDlysMemPs1;
+ }
+
+ RetVal = FALSE;
+ MaxDly = 0;
+ MaxDlyCs = 0;
+ for (ChipSelect = 0; ChipSelect < NBPtr->CsPerChannel; ChipSelect = ChipSelect + NBPtr->CsPerDelay) {
+ if ((NBPtr->DCTPtr->Timings.CsTrainFail & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSelect)) == 0) {
+ // Only choose the dimm that does not fail training
+ for (ByteLane = 0; ByteLane < MAX_BYTELANES; ByteLane++) {
+ RcvEnDly = RcvEnDlyPtr[ChipSelect / NBPtr->CsPerDelay * MAX_DELAYS + ByteLane];
+ // Before Dqs Position Training, this value is 0. So the maximum value for
+ // RdDqsDly needs to be added later when calculating the MaxRdLatency value
+ // after RcvEnDly training but before DQS Position Training.
+ RdDqsDly = RdDqsDlyPtr[ChipSelect / NBPtr->CsPerDelay * MAX_DELAYS + ByteLane];
+ TotalDly = RcvEnDly + ((NBPtr->IsSupported[SwitchRdDqsDlyForMaxRdLatency] && NBPtr->RdDqsDlyForMaxRdLat != 0) ? NBPtr->RdDqsDlyForMaxRdLat: RdDqsDly);
+ if (TotalDly > MaxDly) {
+ MaxDly = TotalDly;
+ MaxDlyCs = ChipSelect;
+ RetVal = TRUE;
+ }
+ }
+ }
+ }
+
+ TechPtr->MaxDlyForMaxRdLat = MaxDly;
+ *ChipSel = MaxDlyCs;
+ return RetVal;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finds the minimum or maximum gross dly among all the bytes.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] TrnDlyType - Target Dly type
+ * @param[in] IfMax - If this is for maximum value or minimum
+ *
+ * @return minimum gross dly
+ */
+UINT8
+STATIC
+MemTFindMinMaxGrossDlyByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN TRN_DLY_TYPE TrnDlyType,
+ IN BOOLEAN IfMax
+ )
+{
+ UINT8 ChipSelect;
+ UINT8 ByteLane;
+ UINT16 CsEnabled;
+ UINT8 MinMaxGrossDly;
+ UINT8 TrnDly;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ CsEnabled = NBPtr->DCTPtr->Timings.CsEnabled;
+ MinMaxGrossDly = IfMax ? 0 : 0xFF;
+
+ for (ChipSelect = 0; ChipSelect < NBPtr->CsPerChannel; ChipSelect = ChipSelect + NBPtr->CsPerDelay) {
+ if ((CsEnabled & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSelect)) != 0) {
+ for (ByteLane = 0; ByteLane < ((NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8); ByteLane++) {
+ TrnDly = (UINT8) (GetTrainDlyFromHeapNb (NBPtr, TrnDlyType, DIMM_BYTE_ACCESS (ChipSelect / NBPtr->CsPerDelay, ByteLane)) >> 5);
+ if ((IfMax && (TrnDly > MinMaxGrossDly)) || (!IfMax && (TrnDly < MinMaxGrossDly))) {
+ MinMaxGrossDly = TrnDly;
+ }
+ }
+ }
+ }
+
+ return MinMaxGrossDly;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function compares test pattern with data in buffer and return a pass/fail bitmap
+ * for 8 Bytes for optimized receiver enable training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Buffer[] - Buffer data from DRAM (Measured data from DRAM) to compare
+ * @param[in] Pattern[] - Pattern (Expected data in ROM/CACHE) to compare against
+ * @param[in] Side - current side being targeted
+ * @param[in] Receiver - Current receiver value
+ * @param[in] Side1En - Indicates if the second side of the DIMM is being used
+ * @return PASS - Bit map of results of comparison
+ */
+
+UINT16
+STATIC
+MemTCompare1ClPatternOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT8 Side,
+ IN UINT8 Receiver,
+ IN BOOLEAN Side1En
+ )
+{
+ UINT16 i;
+ UINT16 j;
+ UINT16 Pass;
+ DIE_STRUCT *MCTPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+ ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+ MCTPtr = TechPtr->NBPtr->MCTPtr;
+
+ if (MCTPtr->GangedMode && MCTPtr->Dct) {
+ j = 8;
+ } else {
+ j = 0;
+ }
+
+ Pass = 0xFFFF;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDelay[BL] -");
+ for (i = 0; i < 8; i++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %02x", TechPtr->RcvrEnDlyOpt[i] & 0xFF);
+ if (Buffer[j] != Pattern[j]) {
+ // if bytelane n fails
+ Pass &= ~((UINT16)1 << (j % 8)); // clear bit n
+ TechPtr->DqsRcvEnFirstPassValOpt[i] = 0;
+ TechPtr->GetFirstPassValOpt[i] = FALSE;
+ TechPtr->IncBy1ForNextCountOpt[i] = FALSE;
+ TechPtr->DqsRcvEnSavedOpt[i] = FALSE;
+ if (TechPtr->FilterStatusOpt[i] != DONE_FILTER) {
+ if (Side == ((Side1En ? 4 : 2) - 1)) {
+ TechPtr->RcvrEnDlyOpt[i] += FILTER_FIRST_STAGE_COUNT;
+ }
+ }
+ } else {
+ if (TechPtr->FilterSidePassCountOpt[i] == ((Side1En ? 4 : 2) - 1)) {
+ //Only apply filter if all sides have passed
+ if (TechPtr->FilterStatusOpt[i] != DONE_FILTER) {
+ if (TechPtr->GetFirstPassValOpt[i] == FALSE) {
+ // This is the first Pass, mark the start of filter check
+ TechPtr->DqsRcvEnFirstPassValOpt[i] = TechPtr->RcvrEnDlyOpt[i];
+ TechPtr->GetFirstPassValOpt[i] = TRUE;
+ TechPtr->IncBy1ForNextCountOpt[i] = FALSE;
+ TechPtr->RcvrEnDlyOpt[i]++;
+ } else {
+ if ((TechPtr->RcvrEnDlyOpt[i] - TechPtr->DqsRcvEnFirstPassValOpt[i]) < FILTER_WINDOW_SIZE) {
+ if (TechPtr->IncBy1ForNextCountOpt[i] == FALSE) {
+ TechPtr->RcvrEnDlyOpt[i] += FILTER_SECOND_STAGE_COUNT;
+ TechPtr->IncBy1ForNextCountOpt[i] = TRUE;
+ } else {
+ TechPtr->RcvrEnDlyOpt[i]++;
+ TechPtr->IncBy1ForNextCountOpt[i] = FALSE;
+ }
+ } else {
+ // End sweep and add offset to first pass
+ TechPtr->MaxRcvrEnDlyBlOpt[i] = TechPtr->DqsRcvEnFirstPassValOpt[i];
+ TechPtr->RcvrEnDlyOpt[i] = TechPtr->DqsRcvEnFirstPassValOpt[i] + FILTER_OFFSET_VALUE;
+ TechPtr->FilterStatusOpt[i] = DONE_FILTER;
+ TechPtr->FilterCountOpt++;
+ }
+ }
+ } else {
+ TechPtr->FilterSidePassCountOpt[i]++;
+ }
+ } else {
+ if (TechPtr->GetFirstPassValOpt[i] == FALSE) {
+ if (Side == ((Side1En ? 4 : 2) - 1)) {
+ TechPtr->RcvrEnDlyOpt[i] += FILTER_FIRST_STAGE_COUNT;
+ }
+ }
+ TechPtr->FilterSidePassCountOpt[i]++;
+ }
+ TechPtr->DqsRcvEnSavedOpt[i] = TRUE;
+ ChannelPtr->RcvEnDlys[(Receiver >> 1) * MAX_DELAYS + i] = TechPtr->RcvrEnDlyOpt[i];
+ }
+ if (Side == ((Side1En ? 4 : 2) - 1)) {
+ TechPtr->FilterSidePassCountOpt[i] = 0;
+ }
+ if (TechPtr->RcvrEnDlyOpt[i] >= TechPtr->RcvrEnDlyLimitOpt[i]) {
+ TechPtr->FilterCountOpt++;
+ }
+
+ j++;
+ }
+
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tPass/Fail -");
+ for (i = 0, j -= 8; i < 8; i++, j++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c", (Buffer[j] == Pattern[j]) ? 'P' : '.');
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Measured -");
+ for (i = 0, j -= 8; i < 8; i++, j++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %02x", Buffer[j]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Expected -");
+ for (i = 0, j -= 8; i < 8; i++, j++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %02x", Pattern[j]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+ );
+
+ return Pass;
+}
+/*-----------------------------------------------------------------------------
+ *
+ * This function initializes variables for optimized training.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * ----------------------------------------------------------------------------
+ */
+VOID
+MemTInitializeVariablesOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 ByteLane;
+ for (ByteLane = 0; ByteLane < MAX_BYTELANES_PER_CHANNEL; ByteLane++) {
+ TechPtr->RcvrEnDlyLimitOpt[ByteLane] = FILTER_MAX_REC_EN_DLY_VALUE; // @attention - limit depends on proc type
+ TechPtr->DqsRcvEnSavedOpt[ByteLane] = FALSE;
+ TechPtr->RcvrEnDlyOpt[ByteLane] = FILTER_NEW_RECEIVER_START_VALUE;
+ TechPtr->GetFirstPassValOpt[ByteLane] = FALSE;
+ TechPtr->DqsRcvEnFirstPassValOpt[ByteLane] = 0;
+ TechPtr->RevertPassValOpt[ByteLane] = FALSE;
+ TechPtr->MaxRcvrEnDlyBlOpt[ByteLane] = 0;
+ TechPtr->FilterStatusOpt[ByteLane] = START_FILTER;
+ TechPtr->FilterCountOpt = 0;
+ TechPtr->FilterSidePassCountOpt[ByteLane] = 0;
+ TechPtr->IncBy1ForNextCountOpt[ByteLane] = FALSE;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function loads the DqsRcvEnDly from saved data and program to additional index
+ * for optimized DQS receiver enabled training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Receiver - Current Chip select value
+ *
+ */
+
+VOID
+STATIC
+MemTLoadRcvrEnDlyOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver
+ )
+{
+ UINT8 i;
+ UINT8 Dimm;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+ ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+ Dimm = Receiver >> 1;
+ for (i = 0; i < 8; i++) {
+ if (TechPtr->DqsRcvEnSavedOpt[i]) {
+ TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver >> 1, i),
+ ChannelPtr->RcvEnDlys[Dimm * MAX_DELAYS + i]);
+ }
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function programs DqsRcvEnDly to additional index for DQS receiver enabled training
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Receiver - Current Chip select value
+ * @param[in] RcvEnDly - receiver enable delay to be saved
+ */
+
+VOID
+STATIC
+MemTSetRcvrEnDlyOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver,
+ IN UINT16 RcvEnDly
+ )
+{
+ UINT8 ByteLane;
+
+ ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+
+ for (ByteLane = 0; ByteLane < 8; ByteLane++) {
+ if (TechPtr->FilterStatusOpt[ByteLane] != DONE_FILTER) {
+ TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Receiver >> 1, ByteLane), TechPtr->RcvrEnDlyOpt[ByteLane]);
+ }
+ }
+}
+/*-----------------------------------------------------------------------------
+ *
+ * This sets any Errors generated from Dly sweep
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] DCT - current DCT
+ * @param[in] Receiver - current receiver
+ *
+ * @return FALSE - Fatal error occurs.
+ * @return TRUE - No fatal error occurs.
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemTSetSweepErrorOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver,
+ IN UINT8 Dct,
+ IN BOOLEAN ErrorCheck
+ )
+{
+ UINT8 ByteLane;
+ MEM_DATA_STRUCT *MemPtr;
+ DIE_STRUCT *MCTPtr;
+ DCT_STRUCT *DCTPtr;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ DCTPtr = NBPtr->DCTPtr;
+ for (ByteLane = 0; ByteLane < MAX_BYTELANES_PER_CHANNEL; ByteLane++) {
+ if (TechPtr->RcvrEnDlyOpt[ByteLane] == TechPtr->RcvrEnDlyLimitOpt[ByteLane]) {
+ // no passing window
+ if (ErrorCheck) {
+ return FALSE;
+ }
+ PutEventLog (AGESA_ERROR, MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, ByteLane, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, MCTPtr);
+ }
+ if (TechPtr->RcvrEnDlyOpt[ByteLane] > (TechPtr->RcvrEnDlyLimitOpt[ByteLane] - 1)) {
+ // passing window too narrow, too far delayed
+ if (ErrorCheck) {
+ return FALSE;
+ }
+ PutEventLog (AGESA_ERROR, MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, ByteLane, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, MCTPtr);
+ DCTPtr->Timings.CsTrainFail |= (UINT16) (3 << Receiver) & DCTPtr->Timings.CsPresent;
+ MCTPtr->ChannelTrainFail |= (UINT32)1 << Dct;
+ if (!NBPtr->MemPtr->ErrorHandling (MCTPtr, NBPtr->Dct, DCTPtr->Timings.CsTrainFail, &MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ return FALSE;
+ }
+ }
+ }
+ return TRUE;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * This function determines the maximum receiver delay value
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @retval MaxRcvrValue - Maximum receiver delay value for all bytelanes
+ * ----------------------------------------------------------------------------
+ */
+
+UINT16
+MemTGetMaxValueOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 ByteLane;
+ UINT16 MaxRcvrValue;
+ MaxRcvrValue = 0;
+ for (ByteLane = 0; ByteLane < MAX_BYTELANES_PER_CHANNEL; ByteLane++) {
+ if (TechPtr->MaxRcvrEnDlyBlOpt[ByteLane] > MaxRcvrValue) {
+ MaxRcvrValue = TechPtr->MaxRcvrEnDlyBlOpt[ByteLane];
+ }
+ }
+ MaxRcvrValue += FILTER_OFFSET_VALUE;
+ return MaxRcvrValue;
+}
+/*-----------------------------------------------------------------------------
+ *
+ * This function determines if the sweep loop should complete.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @retval TRUE - All bytelanes pass
+ * FALSE - Some bytelanes fail
+ * ----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemTCheckRcvrEnDlyLimitOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ if (TechPtr->FilterCountOpt >= (UINT16)MAX_CS_PER_CHANNEL) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function load the result of write levelization training into RcvrEnDlyOpt,
+ * using it as the initial value for Receiver DQS training.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Receiver - Current Chip select value
+ */
+VOID
+STATIC
+MemTLoadInitialRcvEnDlyOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver
+ )
+{
+ UINT8 ByteLane;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ for (ByteLane = 0; ByteLane < MAX_BYTELANES_PER_CHANNEL; ByteLane++) {
+ TechPtr->RcvrEnDlyOpt[ByteLane] = NBPtr->ChannelPtr->WrDqsDlys[((Receiver >> 1) * TechPtr->DlyTableWidth ()) + ByteLane];
+ }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function finds the DIMM that has the largest receiver enable delay that are trained by PMU
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[out] *ChipSel - Pointer to the Chip select that has the largest receiver enable delay
+ * + Read DQS Delay.
+ *
+ * @return TRUE - A chip select can be found.
+ * @return FALSE - A chip select cannot be found.
+ */
+
+BOOLEAN
+MemTFindMaxRcvrEnDlyTrainedByPmuByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ OUT UINT8 *ChipSel
+ )
+{
+ UINT8 ChipSelect;
+ BOOLEAN RetVal;
+ UINT16 MaxDly;
+ UINT8 MaxDlyCs;
+
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+
+ RetVal = FALSE;
+ MaxDly = 0;
+ MaxDlyCs = 0;
+ for (ChipSelect = 0; ChipSelect < NBPtr->CsPerChannel; ChipSelect = ChipSelect + NBPtr->CsPerDelay) {
+ /// @todo Fix this when BKDG has updated algorithm
+ if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSelect)) != 0) {
+ MaxDly = 0;
+ MaxDlyCs = ChipSelect;
+ RetVal = TRUE;
+ }
+ }
+
+ TechPtr->MaxDlyForMaxRdLat = MaxDly;
+ *ChipSel = MaxDlyCs;
+ return RetVal;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttecc.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttecc.c
new file mode 100644
index 0000000..054a274
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttecc.c
@@ -0,0 +1,225 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttecc.c
+ *
+ * Technology ECC byte support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MTTECC_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemTCalcDQSEccTmg (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Dimm,
+ IN UINT8 Type,
+ IN OUT VOID *DlyArray
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the DQS ECC timings
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTSetDQSEccTmgs (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 Dct;
+ UINT8 Dimm;
+ UINT8 i;
+
+ MEM_NB_BLOCK *NBPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ if (NBPtr->MCTPtr->NodeMemSize) {
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ ChannelPtr = NBPtr->ChannelPtr;
+ for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+ if (NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16)1 << (Dimm * 2))) {
+ i = Dimm * TechPtr->DlyTableWidth ();
+ MemTCalcDQSEccTmg (TechPtr, Dimm, AccessRcvEnDly, &ChannelPtr->RcvEnDlys[i]);
+ MemTCalcDQSEccTmg (TechPtr, Dimm, AccessRdDqsDly, &ChannelPtr->RdDqsDlys[i]);
+ MemTCalcDQSEccTmg (TechPtr, Dimm, AccessWrDatDly, &ChannelPtr->WrDatDlys[i]);
+ }
+ }
+ }
+ }
+ }
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function calculates the DQS ECC timings
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Dimm - Dimm number
+ * @param[in] Type - Type of DQS timing
+ * @param[in,out] *DlyArray - Pointer to the array of delays per this Dimm
+ *
+ */
+
+VOID
+STATIC
+MemTCalcDQSEccTmg (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Dimm,
+ IN UINT8 Type,
+ IN OUT VOID *DlyArray
+ )
+{
+ UINT8 i;
+ UINT8 j;
+ UINT8 Scale;
+ UINT8 EccByte;
+ UINT16 ByteiDly;
+ UINT16 BytejDly;
+ UINT16 EccDly;
+ UINT8 *WrDqsDly;
+ MEM_NB_BLOCK *NBPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ ChannelPtr = NBPtr->ChannelPtr;
+
+ EccByte = TechPtr->MaxByteLanes ();
+ i = (UINT8) (ChannelPtr->DctEccDqsLike & 0xFF);
+ j = (UINT8) (ChannelPtr->DctEccDqsLike >> 8);
+ Scale = ChannelPtr->DctEccDqsScale;
+ WrDqsDly = &ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth ()];
+
+ if (Type == AccessRcvEnDly) {
+ ByteiDly = ((UINT16 *) DlyArray)[i];
+ BytejDly = ((UINT16 *) DlyArray)[j];
+ } else {
+ ByteiDly = ((UINT8 *) DlyArray)[i];
+ BytejDly = ((UINT8 *) DlyArray)[j];
+ }
+
+ //
+ // For WrDatDly, Subtract TxDqs Delay to get
+ // TxDq-TxDqs Delta, which is what should be averaged.
+ //
+ if (Type == AccessWrDatDly) {
+ ByteiDly = ByteiDly - WrDqsDly[i];
+ BytejDly = BytejDly - WrDqsDly[j];
+ }
+
+ if (BytejDly > ByteiDly) {
+ EccDly = ByteiDly + (UINT8) (((UINT16) (BytejDly - ByteiDly) * Scale + 0x77) / 0xFF);
+ // Round up --^
+ } else {
+ EccDly = BytejDly + (UINT8) (((UINT16) (ByteiDly - BytejDly) * (0xFF - Scale) + 0x77) / 0xFF);
+ // Round up --^
+ }
+
+ if (Type == AccessRcvEnDly) {
+ ((UINT16 *) DlyArray)[EccByte] = EccDly;
+ } else {
+ ((UINT8 *) DlyArray)[EccByte] = (UINT8) EccDly;
+ }
+
+ //
+ // For WrDatDly, Add back the TxDqs value for ECC bytelane
+ //
+ if (Type == AccessWrDatDly) {
+ EccDly = EccDly + WrDqsDly[EccByte];
+ }
+
+ NBPtr->SetTrainDly (NBPtr, Type, DIMM_BYTE_ACCESS (Dimm, EccByte), EccDly);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mtthrc.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mtthrc.c
new file mode 100644
index 0000000..58ba34a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mtthrc.c
@@ -0,0 +1,312 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtthrc.c
+ *
+ * Phy assisted DQS receiver enable training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MTTHRC_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+#define TpProcMemRcvrSetSeed TpProcMemRcvrSetDelay
+#define TpProcMemRcvrInitPRE TpProcMemRcvrStartSweep
+#define TpProcMemRcvrBackToBackRead TpProcMemRcvrTestPattern
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemTProgramRcvrEnDly (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 ChipSel,
+ IN UINT8 Pass
+ );
+
+BOOLEAN
+STATIC
+MemTDqsTrainRcvrEnHw (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Pass
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern UINT16 T1minToFreq[];
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes first pass of Phy assisted receiver enable training
+ * for current node at DDR800 and below.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @pre Auto refresh and ZQCL must be disabled
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemTDqsTrainRcvrEnHwPass1 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ return MemTDqsTrainRcvrEnHw (TechPtr, 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes second pass of Phy assisted receiver enable training
+ * for current node at DDR1066 and above.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @pre Auto refresh and ZQCL must be disabled
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+MemTDqsTrainRcvrEnHwPass2 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ // If current speed is higher than start-up speed, do second pass of WL
+ if (TechPtr->NBPtr->DCTPtr->Timings.Speed > TechPtr->NBPtr->StartupSpeed) {
+ return MemTDqsTrainRcvrEnHw (TechPtr, 2);
+ }
+ return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes Phy assisted receiver enable training for current node.
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Pass - Pass of the receiver training
+ *
+ * @pre Auto refresh and ZQCL must be disabled
+ *
+ */
+BOOLEAN
+STATIC
+MemTDqsTrainRcvrEnHw (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Pass
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ UINT32 TestAddrRJ16;
+ UINT8 Dct;
+ UINT8 ChipSel;
+ NBPtr = TechPtr->NBPtr;
+
+ TechPtr->TrainingType = TRN_RCVR_ENABLE;
+
+ AGESA_TESTPOINT (TpProcMemReceiverEnableTraining , &(NBPtr->MemPtr->StdHeader));
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart HW RxEn training\n");
+
+ // Set environment settings before training
+ MemTBeginTraining (TechPtr);
+ //
+ // Setup hardware training engine (if applicable)
+ //
+ NBPtr->FamilySpecificHook[SetupHwTrainingEngine] (NBPtr, &TechPtr->TrainingType);
+
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ //training for each rank
+ for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; (NBPtr->MCTPtr->Status[SbLrdimms])? ChipSel += 2: ChipSel++) {
+ if (NBPtr->GetSysAddr (NBPtr, ChipSel, &TestAddrRJ16)) {
+ if (!(NBPtr->MCTPtr->Status[SbLrdimms]) || ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0)) {
+ // 1.Prepare the DIMMs for training
+ NBPtr->SetBitField (NBPtr, BFTrDimmSel, ChipSel / NBPtr->CsPerDelay);
+
+ TechPtr->ChipSel = ChipSel;
+ TechPtr->Pass = Pass;
+ NBPtr->FamilySpecificHook[InitPerNibbleTrn] (NBPtr, NULL);
+ for (TechPtr->TrnNibble = NIBBLE_0; TechPtr->TrnNibble <= (NBPtr->FamilySpecificHook[TrainRxEnPerNibble] (NBPtr, &ChipSel)? NIBBLE_0 : NIBBLE_1); TechPtr->TrnNibble++) {
+ // 2.Prepare the phy for DQS receiver enable training.
+ IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tTestAddr %x0000\n", TestAddrRJ16);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t Byte: 00 01 02 03 04 05 06 07 ECC\n");
+
+ AGESA_TESTPOINT (TpProcMemRcvrSetSeed, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->MemNPrepareRcvrEnDlySeed (NBPtr);
+
+ NBPtr->FamilySpecificHook[SetMaxRdLatBasedOnSeededRxEnDly] (NBPtr, NULL);
+
+ AGESA_TESTPOINT (TpProcMemRcvrInitPRE, &(NBPtr->MemPtr->StdHeader));
+ // 3.BIOS initiates the phy assisted receiver enable training
+ NBPtr->SetBitField (NBPtr, BFDqsRcvTrEn, 1);
+
+ // 4.BIOS begins sending out of back-to-back reads to create
+ // a continuous stream of DQS edges on the DDR interface
+ AGESA_TESTPOINT (TpProcMemRcvrBackToBackRead, &(NBPtr->MemPtr->StdHeader));
+ NBPtr->GenHwRcvEnReads (NBPtr, TestAddrRJ16);
+
+ // 7.Program [DqsRcvTrEn]=0 to stop the DQS receive enable training.
+ NBPtr->SetBitField (NBPtr, BFDqsRcvTrEn, 0);
+
+ // 8.Get the gross and fine delay values.
+ // 9.Calculate the corresponding final delay values
+ MemTProgramRcvrEnDly (TechPtr, ChipSel, Pass);
+ }
+ }
+ }
+ }
+ }
+ // Restore environment settings after training
+ MemTEndTraining (TechPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "End HW RxEn training\n\n");
+
+ return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function calculates final RcvrEnDly for each rank
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] ChipSel - Rank to be trained
+ * @param[in] Pass - Pass of the receiver training
+ *
+ */
+VOID
+STATIC
+MemTProgramRcvrEnDly (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 ChipSel,
+ IN UINT8 Pass
+ )
+{
+ MEM_NB_BLOCK *NBPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+ UINT8 ByteLane;
+ UINT16 RcvEnDly;
+ UINT16 CsPairRcvEnDly;
+ UINT16 RankRcvEnDly[9];
+ NBPtr = TechPtr->NBPtr;
+ ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t PRE: ");
+ for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8) ; ByteLane++) {
+ RcvEnDly = (UINT8) NBPtr->GetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (ChipSel / NBPtr->CsPerDelay, ByteLane));
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", RcvEnDly);
+
+ RcvEnDly = RcvEnDly + TechPtr->DiffSeedGrossSeedPreGross[ByteLane];
+
+ // Add 1 UI to get to the midpoint of preamble
+ RcvEnDly += 0x20;
+ TechPtr->Bytelane = ByteLane;
+ RankRcvEnDly[ByteLane] = RcvEnDly;
+ if (NBPtr->FamilySpecificHook[TrainRxEnAdjustDlyPerNibble] (NBPtr, &RcvEnDly)) {
+ if (((ChipSel & 1) == 1) && (NBPtr->CsPerDelay == 2)) {
+ // For each rank pair on a dual-rank DIMM, compute the average value of the total delays saved during the
+ // training of each rank and program the result in D18F2x[1,0]9C_x0000_00[24:10][DqsRcvEnGrossDelay,
+ // DqsRcvEnFineDelay].
+ CsPairRcvEnDly = ChannelPtr->RcvEnDlys[(ChipSel >> 1) * TechPtr->DlyTableWidth () + ByteLane];
+ RcvEnDly = (CsPairRcvEnDly + RcvEnDly + 1) / 2;
+ }
+ }
+ ChannelPtr->RcvEnDlys[(ChipSel / NBPtr->CsPerDelay) * TechPtr->DlyTableWidth () + ByteLane] = RcvEnDly;
+ NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS ((ChipSel / NBPtr->CsPerDelay), ByteLane), RcvEnDly);
+ }
+
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t RxEn: ");
+ for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", RankRcvEnDly[ByteLane]);
+ }
+ if (NBPtr->FamilySpecificHook[TrainRxEnGetAvgDlyPerNibble] (NBPtr, NULL)) {
+ if (((ChipSel & 1) == 1) && (NBPtr->CsPerDelay == 2)) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Avg: ");
+ for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", ChannelPtr->RcvEnDlys[(ChipSel / NBPtr->CsPerDelay) * TechPtr->DlyTableWidth () + ByteLane]);
+ }
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+ )
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mtthrcSeedTrain.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mtthrcSeedTrain.c
new file mode 100644
index 0000000..ce295ac
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mtthrcSeedTrain.c
@@ -0,0 +1,623 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtthrcSt.c
+ *
+ * Phy assisted DQS receiver enable seedless training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mttEdgeDetect.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MTTHRCSEEDTRAIN_FILECODE
+/*----------------------------------------------------------------------------
+3 * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+STATIC
+MemTRdPosRxEnSeedSetDly3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT UINT16 RcvEnDly,
+ IN OUT UINT8 ByteLane
+ );
+
+VOID
+STATIC
+MemTRdPosRxEnSeedCheckRxEndly3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function checks each bytelane for no window error.
+ *
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in,out] OptParam - Optional parameter
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemTTrackRxEnSeedlessRdWrNoWindBLError (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ UINT8 i;
+ SWEEP_INFO SweepData;
+ SweepData = *(SWEEP_INFO*)OptParam;
+ for (i = 0; i < ((TechPtr->NBPtr->MCTPtr->Status[SbEccDimms] && TechPtr->NBPtr->IsSupported[EccByteTraining]) ? 9 : 8) ; i++) {
+ //
+ /// Skip Bytelanes that have already reached the desired result
+ //
+ if ((SweepData.ResultFound & ((UINT16)1 << i)) == 0) {
+ if (SweepData.TrnDelays[i] == SweepData.EndDelay) {
+ if ((SweepData.EndResult & ((UINT16) (1 << i))) != 0) {
+ TechPtr->ByteLaneError[i] = TRUE;
+ } else {
+ TechPtr->ByteLaneError[i] = FALSE;
+ }
+ }
+ }
+ }
+ return TRUE;
+}
+/*-----------------------------------------------------------------------------
+ *
+ *
+ * This function checks each bytelane for small window error.
+ *
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in,out] OptParam - Optional parameter(Unused)
+ *
+ * @return TRUE
+ * ----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemTTrackRxEnSeedlessRdWrSmallWindBLError (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT VOID *OptParam
+ )
+{
+ TechPtr->ByteLaneError[TechPtr->Bytelane] = TRUE;
+ return TRUE;
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function sets the RxEn delay
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in,out] *RcvEnDly - Receiver Enable Delay
+ * @param[in,out] *ByteLane - Bytelane
+ *
+*/
+VOID
+STATIC
+MemTRdPosRxEnSeedSetDly3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT UINT16 RcvEnDly,
+ IN OUT UINT8 ByteLane
+ )
+{
+ TechPtr->NBPtr->ChannelPtr->RcvEnDlys[(TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay) * TechPtr->DlyTableWidth () + ByteLane] = RcvEnDly;
+ TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS ((TechPtr->ChipSel / TechPtr->NBPtr->CsPerDelay), ByteLane), RcvEnDly);
+ TechPtr->NBPtr->FamilySpecificHook[ResetRxFifoPtr] (TechPtr->NBPtr, TechPtr->NBPtr);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function determines if the currert RxEn delay settings have failed
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+*/
+VOID
+STATIC
+MemTRdPosRxEnSeedCheckRxEndly3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 MaxDlyDimm;
+ TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &MaxDlyDimm);
+ TechPtr->NBPtr->SetMaxLatency (TechPtr->NBPtr, TechPtr->MaxDlyForMaxRdLat);
+ TechPtr->DqsRdWrPosSaved = 0;
+ MemTTrainDQSEdgeDetect (TechPtr);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes RdDQS training and if fails adjusts the RxEn Gross results for
+ * each bytelane
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - All bytelanes pass
+ * @return FALSE - Some bytelanes fail
+*/
+BOOLEAN
+MemTRdPosWithRxEnDlySeeds3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT8 ByteLane;
+ UINT16 PassTestRxEnDly[MAX_BYTELANES_PER_CHANNEL + 1];
+ UINT16 FailTestRxEnDly[MAX_BYTELANES_PER_CHANNEL + 1];
+ UINT16 FinalRxEnCycle[MAX_BYTELANES_PER_CHANNEL + 1];
+ UINT16 RxOrig[MAX_BYTELANES_PER_CHANNEL];
+ UINT8 i;
+ UINT8 j;
+ UINT8 NumBLWithTargetFound;
+ UINT8 MaxByteLanes;
+ INT16 RxEn;
+ BOOLEAN status;
+ BOOLEAN EsbNoDqsPosSave;
+ BOOLEAN OutOfRange[MAX_BYTELANES_PER_CHANNEL];
+ BOOLEAN ByteLanePass[MAX_BYTELANES_PER_CHANNEL];
+ BOOLEAN ByteLaneFail[MAX_BYTELANES_PER_CHANNEL];
+ BOOLEAN RxEnMemClkTested[MAX_BYTELANES_PER_CHANNEL][MAX_POS_RX_EN_SEED_GROSS_RANGE];
+ BOOLEAN RxEnMemClkSt[MAX_BYTELANES_PER_CHANNEL][MAX_POS_RX_EN_SEED_GROSS_RANGE];
+ BOOLEAN RxEnDlyTargetFound[MAX_BYTELANES_PER_CHANNEL];
+ BOOLEAN DlyWrittenToReg[MAX_BYTELANES_PER_CHANNEL];
+ UINT16 RxEnDlyTargetValue[MAX_BYTELANES_PER_CHANNEL];
+ UINT8 AllByteLanesOutOfRange;
+ UINT8 AllByteLanesSaved;
+ UINT8 TotalByteLanesCheckedForSaved;
+ UINT8 MemClkCycle;
+ MEM_NB_BLOCK *NBPtr;
+ CH_DEF_STRUCT *ChannelPtr;
+ NBPtr = TechPtr->NBPtr;
+ ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+ NumBLWithTargetFound = 0;
+ status = FALSE;
+ EsbNoDqsPosSave = TechPtr->NBPtr->MCTPtr->ErrStatus[EsbNoDqsPos];
+ NBPtr->RdDqsDlyRetrnStat = RDDQSDLY_RTN_SUSPEND;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\nStart HW RxEn Seedless training\n\n");
+ // 1. Program D18F2x9C_x0D0F_0[F,8:0]30_dct[1:0][BlockRxDqsLock] = 1.
+ NBPtr->SetBitField (NBPtr, BFBlockRxDqsLock, 0x0100);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\tChip Select: %02x \n", TechPtr->ChipSel);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t Byte: 00 01 02 03 04 05 06 07 ECC\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tRxEn Orig: ");
+ //
+ // Start sweep loops for RxEn Seedless Training
+ //
+ MaxByteLanes = (TechPtr->NBPtr->MCTPtr->Status[SbEccDimms] && TechPtr->NBPtr->IsSupported[EccByteTraining]) ? 9 : 8; //dmach
+ //
+ //Initialialize BL variables
+ //
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ OutOfRange[ByteLane] = FALSE;
+ ByteLanePass[ByteLane] = FALSE;
+ ByteLaneFail[ByteLane] = FALSE;
+ // 2. RxEnOrig = D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] result
+ // from 2.10.6.8.2 [Phy Assisted DQS Receiver Enable Training]
+ RxOrig[ByteLane] = TechPtr->RxOrig[ByteLane]; // Original RxEn Dly based on PRE results
+ RxEnDlyTargetFound[ByteLane] = FALSE;
+ RxEnDlyTargetValue[ByteLane] = 0;
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", RxOrig[ByteLane]);
+ for (i = 0; i < MAX_POS_RX_EN_SEED_GROSS_RANGE; i++) {
+ RxEnMemClkTested[ByteLane][i] = FALSE;
+ }
+ }
+ // Start MemClk delay sweep
+ for (i = 0; i < MAX_POS_RX_EN_SEED_GROSS_RANGE; i++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\ti: %02x\n", i);
+ // Start direction sweep (0, - Positive, 1 - negative)
+ for (j = 0; j < MAX_POS_RX_EN_SEED_GROSS_DIR; j++) {
+ // Edge detect may run twice to see Pass to fail transition
+ // It is not run if the value are already saved
+ // Fail test is only done if pass is found
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tj: %02x\n", j);
+ // Reset Bytelane Flags for next sweep
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ ByteLaneFail[ByteLane] = FALSE;
+ ByteLanePass[ByteLane] = FALSE;
+ OutOfRange[ByteLane] = FALSE;
+ }
+ if (i == 0 && j == 1) {
+ continue; // Since i & j are the same skip
+ }
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t Byte: 00 01 02 03 04 05 06 07 ECC\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t Target BL Found: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", ((RxEnDlyTargetFound[ByteLane] == TRUE) ? 'Y' : 'N'));
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t Target BL Value: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", RxEnDlyTargetValue[ByteLane]);
+ }
+ );
+ //
+ // Find the RxEn Delay for the Pass condition in the Pass to Fail transition
+ // "PassTestRxEnDly"
+ //
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t Setting PassTestRxEnDly\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t PassTestRxEnDly: ");
+ PassTestRxEnDly[ByteLane] = RxOrig[ByteLane];
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+ // Calculate "PassTestRxEnDly" from current "RxEnDly"
+ // 3. RxEnOffset = MOD(RxEnOrig + 0x10, 0x40)
+ RxEn = (j == 0) ? ((INT16)RxOrig[ByteLane] + 0x10 + (0x40*i)) : ((INT16)RxOrig[ByteLane] + 0x10 - (0x40*i));
+ // Check if RxEnDly is in a valid range
+ if ((RxEn >= NBPtr->MinRxEnSeedGross) && (RxEn <= NBPtr->MaxRxEnSeedTotal)) {
+ PassTestRxEnDly[ByteLane] = (UINT16)RxEn;
+ // 4. For each DqsRcvEn value beginning from RxEnOffset incrementing by 1 MEMCLK:
+ // A. Program D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] with
+ // the current value.
+ MemTRdPosRxEnSeedSetDly3 (TechPtr, PassTestRxEnDly[ByteLane], ByteLane);
+ OutOfRange[ByteLane] = FALSE;
+ } else {
+ OutOfRange[ByteLane] = TRUE;
+ }
+ } else {
+ PassTestRxEnDly[ByteLane] = RxEnDlyTargetValue[ByteLane];
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", PassTestRxEnDly[ByteLane]);
+ }
+ // Check if all BLs out of Range at "PassTestRxEnDly"
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t OutOfRange: ");
+ AllByteLanesOutOfRange = 0;
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ if (OutOfRange[ByteLane]) {
+ AllByteLanesOutOfRange++;
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (OutOfRange[ByteLane] == TRUE) ? 'Y' : 'N');
+ }
+ if (AllByteLanesOutOfRange == MaxByteLanes) {
+ continue; // All BLs out of range, so skip
+ }
+ // Check if all BLs saved Results at "PassTestRxEnDly"
+ AllByteLanesSaved = 0;
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ MemClkCycle = (UINT8) (PassTestRxEnDly[ByteLane] >> 5);
+ if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+ if (!RxEnMemClkTested[ByteLane][MemClkCycle]) {
+ AllByteLanesSaved++;
+ }
+ }
+ }
+ // Check if "RxEnDlyValueForPassCond" passed
+ if (AllByteLanesSaved != 0) {
+ // At least one BL has not been saved, so check if "PassTestRxEnDly" passed
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t Checking if PassTestRxEnDly Passes?\n\n");
+ // 4B. Perform 2.10.6.8.5 [DQS Position Training].
+ // Record the result for the current DqsRcvEn setting as a pass or fail depending if a data eye is found.
+ MemTRdPosRxEnSeedCheckRxEndly3 (TechPtr);
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t Byte: 00 01 02 03 04 05 06 07 ECC\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t Err Status: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (TechPtr->ByteLaneError[ByteLane] == TRUE) ? 'F' : 'P');
+ }
+ );
+ } else {
+ // All BLs saved, so use saved results for "PassTestRxEnDly"
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tAll BLs Saved at PassTestRxEnDly\n");
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t Byte: 00 01 02 03 04 05 06 07 ECC\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t Save Err Stat: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ MemClkCycle = (UINT8) (PassTestRxEnDly[ByteLane] >> 5);
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", ((RxEnMemClkSt[ByteLane][MemClkCycle] == TRUE) ? 'F' : 'P'));
+ }
+ );
+ }
+ // Update Saved values for "PassTestRxEnDly"
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+ if (OutOfRange[ByteLane] == FALSE) {
+ MemClkCycle = (UINT8) (PassTestRxEnDly[ByteLane] >> 5);
+ if (!RxEnMemClkTested[ByteLane][MemClkCycle]) {
+ RxEnMemClkTested[ByteLane][MemClkCycle] = TRUE;
+ RxEnMemClkSt[ByteLane][MemClkCycle] = TechPtr->ByteLaneError[ByteLane];
+ }
+ }
+ }
+ }
+ //
+ // Find the RxEn Delay for the Fail condition in the Pass to Fail transition
+ // "FailTestRxEnDly"
+ //
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ DlyWrittenToReg[ByteLane] = FALSE;
+ }
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ FailTestRxEnDly[ByteLane] = PassTestRxEnDly[ByteLane] + 0x40;
+ }
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t Byte: 00 01 02 03 04 05 06 07 ECC\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t FailTestRxEnDly: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", FailTestRxEnDly[ByteLane]);
+ }
+ );
+ // Check if all BLs Saved Results at FailTestRxEnDly
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tSetting FailTestRxEnDly");
+ AllByteLanesSaved = 0;
+ TotalByteLanesCheckedForSaved = 0;
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+ MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5);
+ // Check if RxEnDly + 40 is valid
+ if ((FailTestRxEnDly[ByteLane] >= NBPtr->MinRxEnSeedGross) && (FailTestRxEnDly[ByteLane] <= NBPtr->MaxRxEnSeedTotal)) {
+ if (RxEnMemClkTested[ByteLane][MemClkCycle]) {
+ AllByteLanesSaved++;
+ }
+ OutOfRange[ByteLane] = FALSE;
+ } else {
+ OutOfRange[ByteLane] = TRUE;
+ }
+ TotalByteLanesCheckedForSaved++;
+ }
+ }
+ // Check if all BLs out of Range condition at FailTestRxEnDly
+ AllByteLanesOutOfRange = 0;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t OutOfRange: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ if (OutOfRange[ByteLane]) {
+ AllByteLanesOutOfRange++;
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (OutOfRange[ByteLane] == TRUE) ? 'Y' : 'N');
+ }
+ if (AllByteLanesOutOfRange == MaxByteLanes) {
+ continue; // All BLs out of range, so skip
+ }
+ // Setting FailTestRxEnDly for any BL that was not saved
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t FailTestRxEnDly: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+ MemClkCycle = (UINT8) (PassTestRxEnDly[ByteLane] >> 5);
+ // Check if New RxEnDly has Passed
+ if ((RxEnMemClkTested[ByteLane][MemClkCycle] ? RxEnMemClkSt[ByteLane][MemClkCycle] : TechPtr->ByteLaneError[ByteLane]) == FALSE) {
+ if (OutOfRange[ByteLane] == FALSE) {
+ // BL has passed at "New RxEnDly", so check if "New RxEnDly" + 0x40 fails
+ MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5);
+ if (!RxEnMemClkTested[ByteLane][MemClkCycle]) {
+ // Only Set Delays for ByteLanes that have not been already tested
+ MemTRdPosRxEnSeedSetDly3 (TechPtr, FailTestRxEnDly[ByteLane], ByteLane);
+ DlyWrittenToReg[ByteLane] = TRUE;
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'Y');
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'N');
+ }
+ ByteLanePass[ByteLane] = TRUE;
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'O');
+ }
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'F');
+ }
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'N');
+ }
+ }
+ // Check if BLs that passed at PassTestRxEnDly fail at FailTestRxEnDly
+ if (AllByteLanesSaved != TotalByteLanesCheckedForSaved) {
+ // At least one BL has not been saved, so check if FailTestRxEnDly passed
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\n\t\t Checking if FailTestRxEnDly Fails?\n");
+ MemTRdPosRxEnSeedCheckRxEndly3 (TechPtr);
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t Byte: 00 01 02 03 04 05 06 07 ECC\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t Err Status: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (TechPtr->ByteLaneError[ByteLane] == TRUE) ? 'F' : 'P');
+ }
+ );
+ } else {
+ // All BLs saved, so use saved results for FailTestRxEnDly
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tAll BLs Saved at PassTestRxEnDly\n");
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t Byte: 00 01 02 03 04 05 06 07 ECC\n");
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t Save Err Stat: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5);
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (RxEnMemClkSt[ByteLane][MemClkCycle] == TRUE) ? 'F' : 'P');
+ }
+ );
+ }
+ //
+ // If BL failes at "FailTestRxEnDly" set FinalRxEnCycle
+ //
+ // Setting FinalRxEnCycle for any BL that Failed at FailTestRxEnDly
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n Set FinalRxEnCycle: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+ MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5);
+ if (RxEnMemClkTested[ByteLane][MemClkCycle] ? RxEnMemClkSt[ByteLane][MemClkCycle] == TRUE : (TechPtr->ByteLaneError[ByteLane] && DlyWrittenToReg[ByteLane])) {
+ FinalRxEnCycle[ByteLane] = PassTestRxEnDly[ByteLane] - 0x10;
+ if (((UINT16) FinalRxEnCycle[ByteLane] >= NBPtr->MinRxEnSeedGross) && ((UINT16) FinalRxEnCycle[ByteLane] <= NBPtr->MaxRxEnSeedTotal)) {
+ // Since FailTestRxEnDly, we can set FinalRxEnCycle
+ MemTRdPosRxEnSeedSetDly3 (TechPtr, (UINT16) FinalRxEnCycle[ByteLane], ByteLane);
+ ByteLaneFail[ByteLane] = TRUE;
+ OutOfRange[ByteLane] = FALSE;
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'Y');
+ } else {
+ OutOfRange[ByteLane] = TRUE;
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'N');
+ }
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'F');
+ OutOfRange[ByteLane] = FALSE;
+ }
+ } else {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'Y');
+ }
+ }
+ // Update Saved values for FailTestRxEnDly
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+ if (OutOfRange[ByteLane] == FALSE) {
+ MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5);
+ if (!RxEnMemClkTested[ByteLane][MemClkCycle] && DlyWrittenToReg[ByteLane]) {
+ RxEnMemClkTested[ByteLane][MemClkCycle] = TRUE;
+ RxEnMemClkSt[ByteLane][MemClkCycle] = TechPtr->ByteLaneError[ByteLane];
+ }
+ }
+ }
+ }
+ // Check for out of Range condition
+ AllByteLanesOutOfRange = 0;
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t OutOfRange: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ if (OutOfRange[ByteLane]) {
+ AllByteLanesOutOfRange++;
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (OutOfRange[ByteLane] == TRUE) ? 'Y' : 'N');
+ }
+ if (AllByteLanesOutOfRange == MaxByteLanes) {
+ continue; // All BLs out of range so skip
+ }
+ IDS_HDT_CONSOLE_DEBUG_CODE (
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n FinalRxEnCycle: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", (UINT16) FinalRxEnCycle[ByteLane]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n ByteLaneFail: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (ByteLaneFail[ByteLane] == TRUE) ? 'Y' : 'N');
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n ByteLanePass: ");
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (ByteLanePass[ByteLane] == TRUE) ? 'Y' : 'N');
+ }
+ );
+ //
+ // Check for exit condition
+ // PassTestRxEnDly = Pass and FailTestRxEnDly[ByteLane] = Fail
+ // If found, use "FinalRxEnCycle" as final RxEnDly value
+ //
+ // 5. Process the array of results and determine a pass-to-fail transition.
+ NumBLWithTargetFound = 0;
+ for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) {
+ if (RxEnDlyTargetFound[ByteLane] == FALSE) {
+ // Check if the current BL has found its target
+ if (ByteLanePass[ByteLane] == TRUE && ByteLaneFail[ByteLane] == TRUE) {
+ RxEnDlyTargetFound[ByteLane] = TRUE;
+ NumBLWithTargetFound++;
+ RxEnDlyTargetValue[ByteLane] = FinalRxEnCycle[ByteLane];
+ } else {
+ RxEnDlyTargetFound[ByteLane] = FALSE;
+ }
+ } else {
+ // BL has already failed and passed, so increment both flags
+ NumBLWithTargetFound++;
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ // Check for exit condition
+ if (NumBLWithTargetFound == MaxByteLanes) {
+ // Exit condition found, so setting new RDQS based on RxEn-0x10 \n\n
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Setting new RDQS based on FinalRxEnCycle \n\n");
+ // 5 A. DqsRcvEnCycle = the total delay value of the pass result.
+ // B. Program D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] =
+ // DqsRcvEnCycle - 0x10.
+ NBPtr->RdDqsDlyRetrnStat = RDDQSDLY_RTN_NEEDED;
+ MemTRdPosRxEnSeedCheckRxEndly3 (TechPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ status = TRUE;
+ break;
+ } else {
+ status = FALSE;
+ }
+ }
+ // Check for exit condition
+ if (NumBLWithTargetFound == MaxByteLanes) {
+ status = TRUE;
+ break;
+ } else {
+ status = FALSE;
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ }
+ TechPtr->NBPtr->MCTPtr->ErrStatus[EsbNoDqsPos] = EsbNoDqsPosSave;
+ if (i == MAX_POS_RX_EN_SEED_GROSS_RANGE) {
+ TechPtr->NBPtr->MCTPtr->ErrStatus[EsbNoDqsPos] = TRUE;
+ }
+
+ // 6. Program D18F2x9C_x0D0F_0[F,8:0]30_dct[1:0][BlockRxDqsLock] = 0.
+ NBPtr->SetBitField (NBPtr, BFBlockRxDqsLock, 0);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd HW RxEn Seedless training\n\n");
+ return status;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttml.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttml.c
new file mode 100644
index 0000000..450d03f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttml.c
@@ -0,0 +1,263 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttml.c
+ *
+ * Technology Max Latency Training support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "merrhdl.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MTTML_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function trains Max latency for all dies
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTTrainMaxLatency (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ UINT32 TestAddrRJ16;
+ UINT8 Dct;
+ UINT8 ChipSel;
+ UINT8 *PatternBufPtr;
+ UINT8 *TestBufferPtr;
+ UINT8 CurrentNbPstate;
+ UINT16 CalcMaxLatDly;
+ UINT16 MaxLatDly;
+ UINT16 MaxLatLimit;
+ UINT16 Margin;
+ UINT16 CurTest;
+ UINT16 _CL_;
+ UINT8 TimesFail;
+ UINT8 TimesRetrain;
+ UINT16 i;
+
+ MEM_DATA_STRUCT *MemPtr;
+ DIE_STRUCT *MCTPtr;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ MemPtr = NBPtr->MemPtr;
+ TechPtr->TrainingType = TRN_MAX_READ_LATENCY;
+ TimesRetrain = DEFAULT_TRAINING_TIMES;
+ IDS_OPTION_HOOK (IDS_MEM_RETRAIN_TIMES, &TimesRetrain, &MemPtr->StdHeader);
+
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart MaxRdLat training\n");
+ // Set environment settings before training
+ AGESA_TESTPOINT (TpProcMemMaxRdLatencyTraining, &(MemPtr->StdHeader));
+
+ MemTBeginTraining (TechPtr);
+ //
+ // Initialize the Training Pattern
+ //
+ if (AGESA_SUCCESS != NBPtr->TrainingPatternInit (NBPtr)) {
+ return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+ }
+ TechPtr->PatternLength = (MCTPtr->Status[Sb128bitmode]) ? 6 : 3;
+ //
+ // Setup hardware training engine (if applicable)
+ //
+ NBPtr->FamilySpecificHook[SetupHwTrainingEngine] (NBPtr, &TechPtr->TrainingType);
+ //
+ // Adjust RdDqsDly used for MaxRdLatency calculation
+ //
+ NBPtr->FamilySpecificHook[AdjustRdDqsDlyForMaxRdLat] (NBPtr, NULL);
+
+ MaxLatDly = 0;
+ _CL_ = TechPtr->PatternLength;
+ PatternBufPtr = TechPtr->PatternBufPtr;
+ TestBufferPtr = TechPtr->TestBufPtr;
+ //
+ // Begin max latency training
+ //
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ if (MCTPtr->Status[Sb128bitmode] && (Dct != 0)) {
+ break;
+ }
+
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+
+ if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+ if (TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &ChipSel)) {
+ TechPtr->ChipSel = ChipSel;
+ if (NBPtr->GetSysAddr (NBPtr, ChipSel, &TestAddrRJ16)) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrite to address: %04x0000\n", TestAddrRJ16);
+
+ // Write the test patterns
+ AGESA_TESTPOINT (TpProcMemMaxRdLatWritePattern, &(MemPtr->StdHeader));
+ NBPtr->WritePattern (NBPtr, TestAddrRJ16, PatternBufPtr, _CL_);
+
+ // Sweep max latency delays
+ NBPtr->getMaxLatParams (NBPtr, TechPtr->MaxDlyForMaxRdLat, &CalcMaxLatDly, &MaxLatLimit, &Margin);
+ AGESA_TESTPOINT (TpProcMemMaxRdLatStartSweep, &(MemPtr->StdHeader));
+
+ TimesFail = 0;
+ ERROR_HANDLE_RETRAIN_BEGIN (TimesFail, TimesRetrain)
+ {
+ MaxLatDly = CalcMaxLatDly;
+ for (i = 0; i < (MaxLatLimit - CalcMaxLatDly); i++) {
+ NBPtr->SetBitField (NBPtr, BFMaxLatency, MaxLatDly);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDly %3x", MaxLatDly);
+ TechPtr->ResetDCTWrPtr (TechPtr, 6);
+
+ AGESA_TESTPOINT (TpProcMemMaxRdLatReadPattern, &(MemPtr->StdHeader));
+ NBPtr->ReadPattern (NBPtr, TestBufferPtr, TestAddrRJ16, _CL_);
+ AGESA_TESTPOINT (TpProcMemMaxRdLatTestPattern, &(MemPtr->StdHeader));
+ CurTest = NBPtr->CompareTestPattern (NBPtr, TestBufferPtr, PatternBufPtr, _CL_ * 64);
+ NBPtr->FlushPattern (NBPtr, TestAddrRJ16, _CL_);
+
+ if (NBPtr->IsSupported[ReverseMaxRdLatTrain]) {
+ // Reverse training decrements MaxLatDly whenever the test passes
+ // and uses the last passing MaxLatDly as left edge
+ if (CurTest == 0xFFFF) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " P");
+ if (MaxLatDly == 0) {
+ break;
+ } else {
+ MaxLatDly--;
+ }
+ }
+ } else {
+ // Traditional training increments MaxLatDly until the test passes
+ // and uses it as left edge
+ if (CurTest == 0xFFFF) {
+ IDS_HDT_CONSOLE (MEM_FLOW, " P");
+ break;
+ } else {
+ MaxLatDly++;
+ }
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+ } // End of delay sweep
+ ERROR_HANDLE_RETRAIN_END ((MaxLatDly >= MaxLatLimit), TimesFail)
+ }
+
+ AGESA_TESTPOINT (TpProcMemMaxRdLatSetDelay, &(MemPtr->StdHeader));
+
+ if (MaxLatDly >= MaxLatLimit) {
+ PutEventLog (AGESA_ERROR, MEM_ERROR_MAX_LAT_NO_WINDOW, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, MCTPtr);
+ NBPtr->DCTPtr->Timings.CsTrainFail |= NBPtr->DCTPtr->Timings.CsPresent;
+ MCTPtr->ChannelTrainFail |= (UINT32)1 << Dct;
+ if (!NBPtr->MemPtr->ErrorHandling (MCTPtr, NBPtr->Dct, EXCLUDE_ALL_CHIPSEL, &NBPtr->MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ return FALSE;
+ }
+ } else {
+ NBPtr->FamilySpecificHook[AddlMaxRdLatTrain] (NBPtr, &TestAddrRJ16);
+
+ MaxLatDly = MaxLatDly + Margin;
+ if (NBPtr->IsSupported[ReverseMaxRdLatTrain]) {
+ MaxLatDly++; // Add 1 to get back to the last passing value
+ }
+ // Set final delays
+ CurrentNbPstate = (UINT8) MemNGetBitFieldNb (NBPtr, BFCurNbPstate);
+ ASSERT (CurrentNbPstate <= 3);
+ NBPtr->ChannelPtr->DctMaxRdLat [CurrentNbPstate] = MaxLatDly;
+ NBPtr->SetBitField (NBPtr, BFMaxLatency, MaxLatDly);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tFinal MaxRdLat: %03x\n", MaxLatDly);
+
+ }
+ }
+ }
+ }
+ }
+
+ // Restore environment settings after training
+ MemTEndTraining (TechPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "End MaxRdLat training\n\n");
+ //
+ // Finalize the Pattern
+ //
+ NBPtr->TrainingPatternFinalize (NBPtr);
+ return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttoptsrc.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttoptsrc.c
new file mode 100644
index 0000000..8114730
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttoptsrc.c
@@ -0,0 +1,425 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttoptsrc.c
+ *
+ * New Technology Software based DQS receiver enable training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MTTOPTSRC_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemTDqsTrainOptRcvrEnSw (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Pass
+ );
+
+BOOLEAN
+MemTNewRevTrainingSupport (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes first pass of receiver enable training for all dies
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTTrainOptRcvrEnSwPass1 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ return MemTDqsTrainOptRcvrEnSw (TechPtr, 1);
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes receiver enable training for a specific die
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Pass - Pass of the receiver training
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+STATIC
+MemTDqsTrainOptRcvrEnSw (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Pass
+ )
+{
+ _16BYTE_ALIGN UINT8 PatternBuffer[6 * 64];
+ UINT8 TestBuffer[256];
+ UINT8 *PatternBufPtr[6];
+ UINT8 *TempPtr;
+ UINT32 TestAddrRJ16[4];
+ UINT32 TempAddrRJ16;
+ UINT32 RealAddr;
+ UINT16 CurTest[4];
+ UINT8 Dct;
+ UINT8 Receiver;
+ UINT8 i;
+ UINT8 TimesFail;
+ UINT8 TimesRetrain;
+ UINT16 RcvrEnDly;
+ UINT16 MaxRcvrEnDly;
+ UINT16 RcvrEnDlyLimit;
+ UINT16 MaxDelayCha;
+ BOOLEAN IsDualRank;
+ BOOLEAN S0En;
+ BOOLEAN S1En;
+
+
+ MEM_DATA_STRUCT *MemPtr;
+ DIE_STRUCT *MCTPtr;
+ DCT_STRUCT *DCTPtr;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ TechPtr->TrainingType = TRN_RCVR_ENABLE;
+
+
+ TempAddrRJ16 = 0;
+ TempPtr = NULL;
+ MaxDelayCha = 0;
+ TimesRetrain = DEFAULT_TRAINING_TIMES;
+ IDS_OPTION_HOOK (IDS_MEM_RETRAIN_TIMES, &TimesRetrain, &MemPtr->StdHeader);
+
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Optimized SW RxEn training\n");
+ // Set environment settings before training
+ MemTBeginTraining (TechPtr);
+
+ PatternBufPtr[0] = PatternBufPtr[2] = PatternBuffer;
+ // These two patterns used for first Test Address
+ MemUFillTrainPattern (TestPattern0, PatternBufPtr[0], 64);
+ // Second Cacheline used for Dummy Read is the inverse of
+ // the first so that is is not mistaken for the real read
+ MemUFillTrainPattern (TestPattern1, PatternBufPtr[0] + 64, 64);
+ PatternBufPtr[1] = PatternBufPtr[3] = PatternBufPtr[0] + 128;
+ // These two patterns used for second Test Address
+ MemUFillTrainPattern (TestPattern1, PatternBufPtr[1], 64);
+ // Second Cacheline used for Dummy Read is the inverse of
+ // the first so that is is not mistaken for the real read
+ MemUFillTrainPattern (TestPattern0, PatternBufPtr[1] + 64, 64);
+
+ // Fill pattern for flush after every sweep
+ PatternBufPtr[4] = PatternBufPtr[0] + 256;
+ MemUFillTrainPattern (TestPattern3, PatternBufPtr[4], 64);
+
+ // Fill pattern for initial dummy read
+ PatternBufPtr[5] = PatternBufPtr[0] + 320;
+ MemUFillTrainPattern (TestPattern4, PatternBufPtr[5], 64);
+
+
+ // Begin receiver enable training
+ AGESA_TESTPOINT (TpProcMemReceiverEnableTraining, &(MemPtr->StdHeader));
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ DCTPtr = NBPtr->DCTPtr;
+
+ // Set training bit
+ NBPtr->SetBitField (NBPtr, BFDqsRcvEnTrain, 1);
+
+ // Relax Max Latency before training
+ NBPtr->SetMaxLatency (NBPtr, 0xFFFF);
+
+ if (Pass == FIRST_PASS) {
+ TechPtr->InitDQSPos4RcvrEn (TechPtr);
+ }
+
+ // there are four receiver pairs, loosely associated with chipselects.
+ Receiver = DCTPtr->Timings.CsEnabled ? 0 : 8;
+ for (; Receiver < 8; Receiver += 2) {
+ S0En = NBPtr->GetSysAddr (NBPtr, Receiver, &TestAddrRJ16[0]);
+ S1En = NBPtr->GetSysAddr (NBPtr, Receiver + 1, &TestAddrRJ16[2]);
+ if (S0En) {
+ TestAddrRJ16[1] = TestAddrRJ16[0] + BIGPAGE_X8_RJ16;
+ }
+ if (S1En) {
+ TestAddrRJ16[3] = TestAddrRJ16[2] + BIGPAGE_X8_RJ16;
+ }
+ if (S0En && S1En) {
+ IsDualRank = TRUE;
+ } else {
+ IsDualRank = FALSE;
+ }
+ if (S0En || S1En) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", Receiver);
+
+ RcvrEnDlyLimit = 0x1FF; // @attention - limit depends on proc type
+ TechPtr->DqsRcvEnSaved = 0;
+ RcvrEnDly = RcvrEnDlyLimit;
+ RealAddr = 0;
+
+ TechPtr->GetFirstPassVal = FALSE;
+ TechPtr->DqsRcvEnFirstPassVal = 0;
+ TechPtr->RevertPassVal = FALSE;
+ TechPtr->InitializeVariablesOpt (TechPtr);
+
+ // Write the test patterns
+ AGESA_TESTPOINT (TpProcMemRcvrWritePattern, &(MemPtr->StdHeader));
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrite to addresses: ");
+ for (i = (S0En ? 0 : 2); i < (S1En ? 4 : 2); i++) {
+ RealAddr = MemUSetUpperFSbase (TestAddrRJ16[i], MemPtr);
+ // One cacheline of data to be tested and one of dummy data
+ MemUWriteCachelines (RealAddr, PatternBufPtr[i], 2);
+ // This is dummy data with a different pattern used for the first dummy read.
+ MemUWriteCachelines (RealAddr + 128, PatternBufPtr[5], 1);
+ IDS_HDT_CONSOLE (MEM_FLOW, " %04x0000 ", TestAddrRJ16[i]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+
+ // Sweep receiver enable delays
+ AGESA_TESTPOINT (TpProcMemRcvrStartSweep, &(MemPtr->StdHeader));
+ TimesFail = 0;
+ ERROR_HANDLE_RETRAIN_BEGIN (TimesFail, TimesRetrain)
+ {
+ TechPtr->LoadInitialRcvrEnDlyOpt (TechPtr, Receiver);
+ while (!TechPtr->CheckRcvrEnDlyLimitOpt (TechPtr)) {
+ AGESA_TESTPOINT (TpProcMemRcvrSetDelay, &(MemPtr->StdHeader));
+ TechPtr->SetRcvrEnDlyOpt (TechPtr, Receiver, RcvrEnDly);
+ // Read and compare the first beat of data
+ for (i = (S0En ? 0 : 2); i < (S1En ? 4 : 2); i++) {
+ AGESA_TESTPOINT (TpProcMemRcvrReadPattern, &(MemPtr->StdHeader));
+ RealAddr = MemUSetUpperFSbase (TestAddrRJ16[i], MemPtr);
+ //
+ // Issue dummy cacheline reads
+ //
+ MemUReadCachelines (TestBuffer + 128, RealAddr + 128, 1);
+ MemUReadCachelines (TestBuffer, RealAddr, 1);
+ MemUProcIOClFlush (TestAddrRJ16[i], 2, MemPtr);
+ //
+ // Perform actual read which will be compared
+ //
+ MemUReadCachelines (TestBuffer + 64, RealAddr + 64, 1);
+ AGESA_TESTPOINT (TpProcMemRcvrTestPattern, &(MemPtr->StdHeader));
+ CurTest[i] = TechPtr->Compare1ClPatternOpt (TechPtr, TestBuffer + 64 , PatternBufPtr[i] + 64, i, Receiver, S1En);
+ // Due to speculative execution during MemUReadCachelines, we must
+ // flush one more cache line than we read.
+ MemUProcIOClFlush (TestAddrRJ16[i], 4, MemPtr);
+ TechPtr->ResetDCTWrPtr (TechPtr, Receiver);
+
+ //
+ // Swap the test pointers such that even and odd steps alternate.
+ //
+ if ((i % 2) == 0) {
+ TempPtr = PatternBufPtr[i];
+ PatternBufPtr[i] = PatternBufPtr[i + 1];
+
+ TempAddrRJ16 = TestAddrRJ16[i];
+ TestAddrRJ16[i] = TestAddrRJ16[i + 1];
+ } else {
+ PatternBufPtr[i] = TempPtr;
+ TestAddrRJ16[i] = TempAddrRJ16;
+ }
+ }
+ } // End of delay sweep
+ ERROR_HANDLE_RETRAIN_END (!TechPtr->SetSweepErrorOpt (TechPtr, Receiver, Dct, TRUE), TimesFail)
+ }
+
+ if (!TechPtr->SetSweepErrorOpt (TechPtr, Receiver, Dct, FALSE)) {
+ return FALSE;
+ }
+
+ TechPtr->LoadRcvrEnDlyOpt (TechPtr, Receiver); // set final delays
+ //
+ // Flush AA and 55 patterns by reading a dummy pattern to fill in FIFO
+ //
+ // Aquire a new FSBase, based on the last test address that we stored.
+ RealAddr = MemUSetUpperFSbase (TempAddrRJ16, MemPtr);
+ ASSERT (RealAddr != 0);
+ MemUWriteCachelines (RealAddr, PatternBufPtr[4], 1);
+ MemUWriteCachelines (RealAddr + 64, PatternBufPtr[4], 1);
+ MemUReadCachelines (TestBuffer, RealAddr, 2);
+ // Due to speculative execution during MemUReadCachelines, we must
+ // flush one more cache line than we read.
+ MemUProcIOClFlush (TempAddrRJ16, 3, MemPtr);
+ }
+ } // End while Receiver < 8
+
+ // Clear training bit when done
+ NBPtr->SetBitField (NBPtr, BFDqsRcvEnTrain, 0);
+
+ // Set Max Latency for both channels
+ MaxRcvrEnDly = TechPtr->GetMaxValueOpt (TechPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMaxRcvrEnDly: %03x\n", MaxRcvrEnDly);
+ if (MCTPtr->GangedMode) {
+ if (Dct == 0) {
+ MaxDelayCha = MaxRcvrEnDly;
+ } else if (MaxRcvrEnDly > MaxDelayCha) {
+ NBPtr->SwitchDCT (NBPtr, 0);
+ NBPtr->SetMaxLatency (NBPtr, MaxRcvrEnDly);
+ }
+ } else {
+ NBPtr->SetMaxLatency (NBPtr, MaxRcvrEnDly);
+ }
+ TechPtr->ResetDCTWrPtr (TechPtr, 6);
+ }
+
+ // Restore environment settings after training
+ MemTEndTraining (TechPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "End Optimized SW RxEn training\n\n");
+ return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * This function saves passing DqsRcvEnDly values to the stack
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Receiver - Current Chip select value
+ * @param[in] RcvEnDly - receiver enable delay to be saved
+ * @param[in] cmpResultRank0 - compare result for Rank 0
+ * @param[in] cmpResultRank0 - compare result for Rank 1
+ *
+ * @retval TRUE - All bytelanes pass
+ * FALSE - Some bytelanes fail
+ * ----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemTSaveRcvrEnDlyByteFilterOpt (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver,
+ IN UINT16 RcvEnDly,
+ IN UINT16 CmpResultRank0,
+ IN UINT16 CmpResultRank1
+ )
+{
+ UINT8 i;
+ UINT8 Passed;
+ UINT8 Dimm;
+ CH_DEF_STRUCT *ChannelPtr;
+
+ ASSERT (Receiver < MAX_CS_PER_CHANNEL);
+ ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+ Passed = (UINT8) ((CmpResultRank0 & CmpResultRank1) & 0xFF);
+
+ Dimm = Receiver >> 1;
+
+ if (TechPtr->GetFirstPassVal && (RcvEnDly - TechPtr->DqsRcvEnFirstPassVal) >= 0x30) {
+ for (i = 0; i < 8; i++) {
+ ChannelPtr->RcvEnDlys[Dimm * TechPtr->DlyTableWidth () + i] = TechPtr->DqsRcvEnFirstPassVal + NEW_RECEIVER_FINAL_OFFSETVALUE;
+ }
+ TechPtr->DqsRcvEnSaved = 0xFF;
+ }
+
+ if (Passed == 0xFF) {
+ if (!TechPtr->GetFirstPassVal) {
+ TechPtr->DqsRcvEnFirstPassVal = RcvEnDly;
+ TechPtr->GetFirstPassVal = TRUE;
+ }
+ return TRUE;
+ } else {
+ TechPtr->DqsRcvEnFirstPassVal = 0;
+
+ // We have got first passing value, but later, we meet with glitch
+ if (TechPtr->GetFirstPassVal) {
+ TechPtr->DqsRcvEnFirstPassVal = 0xFF;
+ TechPtr->GetFirstPassVal = FALSE;
+ }
+ return FALSE;
+ }
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttsrc.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttsrc.c
new file mode 100644
index 0000000..7fcf6d0
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/mttsrc.c
@@ -0,0 +1,345 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttsrc.c
+ *
+ * Technology Software based DQS receiver enable training
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ * MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "GeneralServices.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_MTTSRC_FILECODE
+/*----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemTDqsTrainRcvrEnSw (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Pass
+ );
+
+/*----------------------------------------------------------------------------
+ * EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes first pass of receiver enable training for all dies
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTTrainRcvrEnSwPass1 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ )
+{
+ return MemTDqsTrainRcvrEnSw (TechPtr, 1);
+}
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ * This function executes receiver enable training for a specific die
+ *
+ * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ * @param[in] Pass - Pass of the receiver training
+ *
+ * @return TRUE - No fatal error occurs.
+ * @return FALSE - Fatal error occurs.
+ */
+BOOLEAN
+STATIC
+MemTDqsTrainRcvrEnSw (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Pass
+ )
+{
+ _16BYTE_ALIGN UINT8 PatternBuffer[3 * 64];
+ UINT8 TestBuffer[120];
+ UINT8 *PatternBufPtr[4];
+ UINT8 *TempPtr;
+ UINT32 TestAddrRJ16[4];
+ UINT32 TempAddrRJ16;
+ UINT32 RealAddr;
+ UINT16 CurTest[4];
+ UINT8 Dct;
+ UINT8 Receiver;
+ UINT8 i;
+ UINT8 TimesFail;
+ UINT8 TimesRetrain;
+ UINT16 RcvrEnDly;
+ UINT16 MaxRcvrEnDly;
+ UINT16 RcvrEnDlyLimit;
+ UINT16 MaxDelayCha;
+ BOOLEAN IsDualRank;
+ BOOLEAN S0En;
+ BOOLEAN S1En;
+ UINT8 MaxFilterDly;
+
+ MEM_DATA_STRUCT *MemPtr;
+ DIE_STRUCT *MCTPtr;
+ DCT_STRUCT *DCTPtr;
+ MEM_NB_BLOCK *NBPtr;
+
+ NBPtr = TechPtr->NBPtr;
+ MemPtr = NBPtr->MemPtr;
+ MCTPtr = NBPtr->MCTPtr;
+ TechPtr->TrainingType = TRN_RCVR_ENABLE;
+
+
+ TempAddrRJ16 = 0;
+ TempPtr = NULL;
+ MaxDelayCha = 0;
+ MaxFilterDly = TechPtr->MaxFilterDly;
+ RcvrEnDlyLimit = NBPtr->RcvrEnDlyLimit;
+ TimesRetrain = DEFAULT_TRAINING_TIMES;
+ IDS_OPTION_HOOK (IDS_MEM_RETRAIN_TIMES, &TimesRetrain, &MemPtr->StdHeader);
+
+ IDS_HDT_CONSOLE (MEM_STATUS, "\nStart SW RxEn training\n");
+ // Set environment settings before training
+ MemTBeginTraining (TechPtr);
+
+ PatternBufPtr[0] = PatternBufPtr[2] = PatternBuffer;
+ MemUFillTrainPattern (TestPattern0, PatternBufPtr[0], 64);
+ PatternBufPtr[1] = PatternBufPtr[3] = PatternBufPtr[0] + 128;
+ MemUFillTrainPattern (TestPattern1, PatternBufPtr[1], 64);
+
+ // Begin receiver enable training
+ AGESA_TESTPOINT (TpProcMemReceiverEnableTraining, &(MemPtr->StdHeader));
+ MaxRcvrEnDly = 0;
+ for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+ NBPtr->SwitchDCT (NBPtr, Dct);
+ DCTPtr = NBPtr->DCTPtr;
+
+ // Set training bit
+ NBPtr->SetBitField (NBPtr, BFDqsRcvEnTrain, 1);
+
+ // Relax Max Latency before training
+ NBPtr->SetMaxLatency (NBPtr, 0xFFFF);
+
+ if (Pass == FIRST_PASS) {
+ TechPtr->InitDQSPos4RcvrEn (TechPtr);
+ }
+
+ // there are four receiver pairs, loosely associated with chipselects.
+ Receiver = DCTPtr->Timings.CsEnabled ? 0 : 8;
+ for (; Receiver < 8; Receiver += 2) {
+ TechPtr->DqsRcvEnSaved = 0;
+ RcvrEnDly = RcvrEnDlyLimit;
+ S0En = NBPtr->GetSysAddr (NBPtr, Receiver, &TestAddrRJ16[0]);
+ S1En = NBPtr->GetSysAddr (NBPtr, Receiver + 1, &TestAddrRJ16[2]);
+ if (S0En) {
+ TestAddrRJ16[1] = TestAddrRJ16[0] + BIGPAGE_X8_RJ16;
+ }
+ if (S1En) {
+ TestAddrRJ16[3] = TestAddrRJ16[2] + BIGPAGE_X8_RJ16;
+ }
+ if (S0En && S1En) {
+ IsDualRank = TRUE;
+ } else {
+ IsDualRank = FALSE;
+ }
+
+ if (S0En || S1En) {
+ IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", Receiver);
+
+ // Write the test patterns
+ AGESA_TESTPOINT (TpProcMemRcvrWritePattern, &(MemPtr->StdHeader));
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrite to addresses: ");
+ for (i = (S0En ? 0 : 2); i < (S1En ? 4 : 2); i++) {
+ RealAddr = MemUSetUpperFSbase (TestAddrRJ16[i], MemPtr);
+ MemUWriteCachelines (RealAddr, PatternBufPtr[i], 1);
+ IDS_HDT_CONSOLE (MEM_FLOW, " %04x0000 ", TestAddrRJ16[i]);
+ }
+ IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+
+ // Initialize RcvrEnDly value and other DCT stored values
+ // MCTPtr->DqsRcvEnPass = Pass ? 0xFF : 0;
+
+ // Sweep receiver enable delays
+ AGESA_TESTPOINT (TpProcMemRcvrStartSweep, &(MemPtr->StdHeader));
+ TimesFail = 0;
+ ERROR_HANDLE_RETRAIN_BEGIN (TimesFail, TimesRetrain)
+ {
+ for (RcvrEnDly = 0; RcvrEnDly < RcvrEnDlyLimit; RcvrEnDly++) {
+ AGESA_TESTPOINT (TpProcMemRcvrSetDelay, &(MemPtr->StdHeader));
+ TechPtr->SetRcvrEnDly (TechPtr, Receiver, RcvrEnDly);
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDly %3x", RcvrEnDly);
+
+ // Read and compare the first beat of data
+ for (i = (S0En ? 0 : 2); i < (S1En ? 4 : 2); i++) {
+ AGESA_TESTPOINT (TpProcMemRcvrReadPattern, &(MemPtr->StdHeader));
+ RealAddr = MemUSetUpperFSbase (TestAddrRJ16[i], MemPtr);
+ MemUReadCachelines (TestBuffer, RealAddr, 1);
+ AGESA_TESTPOINT (TpProcMemRcvrTestPattern, &(MemPtr->StdHeader));
+ CurTest[i] = TechPtr->Compare1ClPattern (TechPtr, TestBuffer, PatternBufPtr[i]);
+ // Due to speculative execution during MemUReadCachelines, we must
+ // flush one more cache line than we read.
+ MemUProcIOClFlush (TestAddrRJ16[i], 2, MemPtr);
+ TechPtr->ResetDCTWrPtr (TechPtr, Receiver);
+
+ //
+ // Swap the test pointers such that even and odd steps alternate.
+ //
+ if ((i % 2) == 0) {
+ TempPtr = PatternBufPtr[i];
+ PatternBufPtr[i] = PatternBufPtr[i + 1];
+
+ TempAddrRJ16 = TestAddrRJ16[i];
+ TestAddrRJ16[i] = TestAddrRJ16[i + 1];
+ } else {
+ PatternBufPtr[i] = TempPtr;
+ TestAddrRJ16[i] = TempAddrRJ16;
+ }
+ }
+
+ if (TechPtr->SaveRcvrEnDly (TechPtr, Receiver, RcvrEnDly, S0En ? (CurTest[0] & CurTest[1]) : 0xFFFF, S1En ? (CurTest[2] & CurTest[3]) : 0xFFFF)) {
+ // if all bytelanes pass
+ if (MaxRcvrEnDly < (RcvrEnDly - MaxFilterDly)) {
+ MaxRcvrEnDly = RcvrEnDly - MaxFilterDly;
+ }
+ break;
+ }
+ } // End of delay sweep
+ ERROR_HANDLE_RETRAIN_END ((RcvrEnDly > (RcvrEnDlyLimit - 1)), TimesFail)
+ }
+
+ if (RcvrEnDly == RcvrEnDlyLimit) {
+ // no passing window
+ PutEventLog (AGESA_ERROR, MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, MCTPtr);
+ }
+
+ if (RcvrEnDly > (RcvrEnDlyLimit - 1)) {
+ // passing window too narrow, too far delayed
+ PutEventLog (AGESA_ERROR, MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+ SetMemError (AGESA_ERROR, MCTPtr);
+ DCTPtr->Timings.CsTrainFail |= DCTPtr->Timings.CsPresent & (UINT16) (3 << Receiver);
+ MCTPtr->ChannelTrainFail |= (UINT32)1 << Dct;
+ if (!NBPtr->MemPtr->ErrorHandling (MCTPtr, NBPtr->Dct, DCTPtr->Timings.CsTrainFail, &NBPtr->MemPtr->StdHeader)) {
+ ASSERT (FALSE);
+ return FALSE;
+ }
+ }
+ }
+
+ TechPtr->LoadRcvrEnDly (TechPtr, Receiver); // set final delays
+ } // End while Receiver < 8
+
+ // Clear training bit when done
+ NBPtr->SetBitField (NBPtr, BFDqsRcvEnTrain, 0);
+
+ // Set Max Latency for both channels
+ MaxRcvrEnDly += 0x20; // @attention -
+ IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMaxRcvrEnDly: %03x\n", MaxRcvrEnDly);
+ if (MCTPtr->GangedMode) {
+ if (Dct == 0) {
+ MaxDelayCha = MaxRcvrEnDly;
+ } else if (MaxRcvrEnDly > MaxDelayCha) {
+ NBPtr->SwitchDCT (NBPtr, 0);
+ NBPtr->SetMaxLatency (NBPtr, MaxRcvrEnDly);
+ }
+ } else {
+ NBPtr->SetMaxLatency (NBPtr, MaxRcvrEnDly);
+ }
+ TechPtr->ResetDCTWrPtr (TechPtr, 6);
+ }
+
+ // Restore environment settings after training
+ MemTEndTraining (TechPtr);
+ IDS_HDT_CONSOLE (MEM_FLOW, "End SW RxEn training\n\n");
+ return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/ma.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/ma.h
new file mode 100644
index 0000000..31bba31
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/ma.h
@@ -0,0 +1,162 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * ma.h
+ *
+ * ARDK common header file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _MA_H_
+#define _MA_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+
+#define MAX_CS_PER_CHANNEL 8 ///< Max CS per channel
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/** MARDK Structure*/
+typedef struct {
+ UINT16 Speed; ///< Dram speed in MHz
+ UINT8 Loads; ///< Number of Data Loads
+ UINT32 AddrTmg; ///< Address Timing value
+ UINT32 Odc; ///< Output Driver Compensation Value
+} PSCFG_ENTRY;
+
+/** MARDK Structure*/
+typedef struct {
+ UINT16 Speed; ///< Dram speed in MHz
+ UINT8 Loads; ///< Number of Data Loads
+ UINT32 AddrTmg; ///< Address Timing value
+ UINT32 Odc; ///< Output Driver Compensation Value
+ UINT8 Dimms; ///< Number of Dimms
+} ADV_PSCFG_ENTRY;
+
+/** MARDK Structure for RDIMMs*/
+typedef struct {
+ UINT16 Speed; ///< Dram speed in MHz
+ UINT16 DIMMRankType; ///< Bitmap of Ranks //Bit0-3:DIMM0(1:SR, 2:DR, 4:QR, 0:No Dimm, 0xF:Any), Bit4-7:DIMM1, Bit8-11:DIMM2, Bit12-16:DIMM3
+ UINT32 AddrTmg; ///< Address Timing value
+ UINT16 RC2RC8; ///< RC2 and RC8 value //High byte: 1st pair value, Low byte: 2nd pair value
+ UINT8 Dimms; ///< Number of Dimms
+} ADV_R_PSCFG_ENTRY;
+
+/** MARDK Structure*/
+typedef struct {
+ UINT16 DIMMRankType; ///< Bitmap of Ranks //Bit0-3:DIMM0(1:SR, 2:DR, 4:QR, 0:No Dimm, 0xF:Any), Bit4-7:DIMM1, Bit8-11:DIMM2, Bit12-16:DIMM3
+ UINT32 PhyRODTCSLow; ///< Fn2_9C 180
+ UINT32 PhyRODTCSHigh; ///< Fn2_9C 181
+ UINT32 PhyWODTCSLow; ///< Fn2_9C 182
+ UINT32 PhyWODTCSHigh; ///< Fn2_9C 183
+ UINT8 Dimms; ///< Number of Dimms
+} ADV_PSCFG_ODT_ENTRY;
+
+/** MARDK Structure for Write Levelization ODT*/
+typedef struct {
+ UINT16 DIMMRankType; ///< Bitmap of Ranks //Bit0-3:DIMM0(1:SR, 2:DR, 4:QR, 0:No Dimm, 0xF:Any), Bit4-7:DIMM1, Bit8-11:DIMM2, Bit12-16:DIMM3
+ UINT8 PhyWrLvOdt[MAX_CS_PER_CHANNEL / 2]; ///< WrLvOdt (Fn2_9C_0x08[11:8]) Value for each Dimm
+ UINT8 Dimms; ///< Number of Dimms
+} ADV_R_PSCFG_WL_ODT_ENTRY;
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+MemAGetPsCfgDef (
+ IN OUT MEM_DATA_STRUCT *MemData,
+ IN UINT8 SocketID,
+ IN OUT CH_DEF_STRUCT *CurrentChannel
+ );
+
+UINT16
+MemAGetPsRankType (
+ IN CH_DEF_STRUCT *CurrentChannel
+ );
+
+AGESA_STATUS
+MemRecNGetPsCfgDef (
+ IN OUT MEM_DATA_STRUCT *MemData,
+ IN UINT8 SocketID,
+ IN OUT CH_DEF_STRUCT *CurrentChannel
+ );
+
+UINT16
+MemRecNGetPsRankType (
+ IN CH_DEF_STRUCT *CurrentChannel
+ );
+
+AGESA_STATUS
+MemRecNGetPsCfgUDIMM3Nb (
+ IN OUT MEM_DATA_STRUCT *MemData,
+ IN UINT8 SocketID,
+ IN OUT CH_DEF_STRUCT *CurrentChannel
+ );
+
+AGESA_STATUS
+MemRecNGetPsCfgSODIMM3Nb (
+ IN OUT MEM_DATA_STRUCT *MemData,
+ IN UINT8 SocketID,
+ IN OUT CH_DEF_STRUCT *CurrentChannel
+ );
+
+AGESA_STATUS
+MemRecNGetPsCfgRDIMM3Nb (
+ IN OUT MEM_DATA_STRUCT *MemData,
+ IN UINT8 SocketID,
+ IN OUT CH_DEF_STRUCT *CurrentChannel
+ );
+
+#endif /* _MA_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/merrhdl.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/merrhdl.h
new file mode 100644
index 0000000..43f8db6
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/merrhdl.h
@@ -0,0 +1,103 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mmerrhdl.h
+ *
+ * main error handling
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MMERRHDL_H_
+#define _MMERRHDL_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define EXCLUDE_ALL_DCT 0xFF
+#define EXCLUDE_ALL_CHIPSEL 0xFF
+
+/// default times of training
+#define DEFAULT_TRAINING_TIMES 1
+
+/// number of us to wait in parallel training
+#define PARALLEL_TRAINING_TIMEOUT 60000000
+
+/// number of us to wait in PCI space access
+#define PCI_ACCESS_TIMEOUT 10000000
+/// number of us to wait in special PCI space access which takes much longer than others
+#define SPECIAL_PCI_ACCESS_TIMEOUT 20000000
+
+/// Beginning of retrain handling, must be ended with the ending of the handling
+#define ERROR_HANDLE_RETRAIN_BEGIN(counter, limit) while (counter < limit)
+
+/// Ending of retrain handling
+#define ERROR_HANDLE_RETRAIN_END(condition, counter) \
+if (condition) { \
+ counter ++; \
+} else { \
+ break; \
+}
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemErrHandle (
+ IN DIE_STRUCT *MCTPtr,
+ IN UINT8 DCT,
+ IN UINT16 ChipSelMask,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif /* _MMERRHDL_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mfParallelTraining.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mfParallelTraining.h
new file mode 100644
index 0000000..3124079
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mfParallelTraining.h
@@ -0,0 +1,113 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfParallelTraining.h
+ *
+ * Header file for the parallel training feature
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+#ifndef _MFPARALLELTRAINING_H_
+#define _MFPARALLELTRAINING_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+typedef BOOLEAN (*REMOTE_NBBLOCK_CONSTRUCTOR) (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN DIE_STRUCT *MCTPtr,
+ IN MEM_FEAT_BLOCK_NB *FeatPtr
+);
+
+///< This structure defines the environment on the AP for parallel training
+typedef struct _REMOTE_TRAINING_ENV {
+ IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Config pointer of BSP
+ IN OUT AGESA_STATUS (*GetPlatformCfg[MAX_PLATFORM_TYPES]) (struct _MEM_DATA_STRUCT *MemData, UINT8 SocketID, CH_DEF_STRUCT *CurrentChannel); ///< look-up platform info
+ IN OUT BOOLEAN (*ErrorHandling)(struct _DIE_STRUCT *MCTPtr, UINT8 DCT, UINT16 ChipSelMask, AMD_CONFIG_PARAMS *StdHeader); ///< Error Handling
+ IN REMOTE_NBBLOCK_CONSTRUCTOR NBBlockCtor; ///< NB Block constructor
+ IN MEM_FEAT_BLOCK_NB *FeatPtr; ///< Feature block pointer
+ IN UINT8 *TableBasedAlterations; ///< Point to an array of data bytes describing desired modifications to register settings
+ IN PSO_TABLE *PlatformMemoryConfiguration; ///< Point to platform config table
+ IN UINT32 HoleBase; ///< Used for Memtyping
+ IN UINT32 UmaSize; ///< Used for Memtyping
+ IN UINT16 BottomIo; ///< Used for Memtyping
+ IN UINT32 SysLimit; ///< Used for Memtyping
+ IN UINT8 BspSocket; ///< Socket number of BSP
+ IN UINT8 BspCore; ///< Core number of BSP
+ IN DIE_STRUCT DieStruct; ///< Remote copy of Die Struct
+} REMOTE_TRAINING_ENV;
+
+///< This structure defines Die information
+typedef struct _DIE_INFO {
+ IN OUT UINT8 Socket; ///< Socket number
+ IN OUT UINT8 Core; ///< Core number
+ IN OUT BOOLEAN Training; ///< Training Flag, 1 = Training has been started on this core
+} DIE_INFO;
+
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFParallelTraining (
+ IN OUT REMOTE_TRAINING_ENV *EnvPtr,
+ IN OUT AMD_CONFIG_PARAMS *StdHeader
+ );
+
+#endif /* _MFPARALLELTRAINING_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mfStandardTraining.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mfStandardTraining.h
new file mode 100644
index 0000000..a8e076a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mfStandardTraining.h
@@ -0,0 +1,81 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfStandardTraining.h
+ *
+ * Feature implementation of standard function which performs memory training
+ * from the BSP only
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+#ifndef _MFSTANDARDTRAINING_H_
+#define _MFSTANDARDTRAINING_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemFStandardTraining (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+#endif /* _MFSTANDARDTRAINING_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mfmemclr.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mfmemclr.h
new file mode 100644
index 0000000..4babfa3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mfmemclr.h
@@ -0,0 +1,83 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfmemclr.h
+ *
+ * Feature Functions For Memory Clear Operation
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MFMEMCLR_H_
+#define _MFMEMCLR_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+MemFMctMemClr_Init (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemFMctMemClr_Sync (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+#endif /* _MFMEMCLR_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mfs3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mfs3.h
new file mode 100644
index 0000000..4b30237
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mfs3.h
@@ -0,0 +1,335 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mfS3.h
+ *
+ * S3 resume memory related functions.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Feat/S3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _MFS3_H_
+#define _MFS3_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define PRESELFREF 0
+#define POSTSELFREF 1
+#define DCT0 0
+#define DCT1 1
+#define DCT0_MASK 0x1
+#define DCT1_MASK 0x2
+#define DCT0_NBPSTATE_SUPPORT_MASK 0x4
+#define DCT1_NBPSTATE_SUPPORT_MASK 0x8
+#define DCT0_DDR3_MASK 0x10
+#define DCT1_DDR3_MASK 0x20
+#define NODE_WITHOUT_DIMM_MASK 0x80
+#define DCT0_ANY_DIMM_MASK 0x55
+#define DCT1_ANY_DIMM_MASK 0xAA
+#define ANY_DIMM_MASK 0xFF
+
+#define DCT_PHY_FLAG 0
+#define DCT_EXTRA_FLAG 1
+#define SET_S3_SPECIAL_OFFSET(AccessType, Dct, Offset) ((AccessType << 11) | (Dct << 10) | Offset)
+
+#define RESTORE_TRAINING_MODE 1
+#define CAPSULE_REBOOT_MODE 2
+#define S3_RESUME_MODE 4
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/// struct for all the descriptor for pre exit self refresh and post exit self refresh
+typedef struct _DESCRIPTOR_GROUP {
+ PCI_DEVICE_DESCRIPTOR PCIDevice[2]; ///< PCI device descriptor
+ CONDITIONAL_PCI_DEVICE_DESCRIPTOR CPCIDevice[2]; ///< Conditional PCI device descriptor
+ MSR_DEVICE_DESCRIPTOR MSRDevice[2]; ///< MSR device descriptor
+ CONDITIONAL_MSR_DEVICE_DESCRIPTOR CMSRDevice[2]; ///< Conditional MSR device descriptor
+} DESCRIPTOR_GROUP;
+
+/// Northbridge block to be used in S3 resume and save.
+typedef struct _S3_MEM_NB_BLOCK {
+ UINT8 MemS3SpecialCaseHeapSize; ///< Heap size for the special case register heap.
+ struct _MEM_NB_BLOCK *NBPtr; ///< Pointer to the north bridge block.
+ VOID (*MemS3ExitSelfRefReg) (MEM_NB_BLOCK *NBPtr, AMD_CONFIG_PARAMS *StdHeaderPtr); ///< S3 Exit self refresh register
+ VOID (*MemS3GetConPCIMask) (MEM_NB_BLOCK *NBPtr, DESCRIPTOR_GROUP *DescriptPtr); ///< Get conditional mask for PCI register setting
+ VOID (*MemS3GetConMSRMask) (MEM_NB_BLOCK *NBPtr, DESCRIPTOR_GROUP *DescriptPtr); ///< Get conditional mask for MSR register setting
+ UINT16 (*MemS3GetRegLstPtr) (MEM_NB_BLOCK *NBPtr, DESCRIPTOR_GROUP *DescriptPtr); ///< Get register list pointer for both PCI and MSR register
+ BOOLEAN (*MemS3Resume) (struct _S3_MEM_NB_BLOCK *S3NBPtr, UINT8 NodeID);///< Exit Self Refresh
+ VOID (*MemS3RestoreScrub) (MEM_NB_BLOCK *NBPtr, UINT8 NodeID);///< Restore scrubber base
+ AGESA_STATUS (*MemS3GetDeviceRegLst) (UINT32 ReigsterLstID, VOID **RegisterHeader); ///< Get register list for a device
+} S3_MEM_NB_BLOCK;
+
+/// Header for heap space to store the special case register.
+typedef struct _S3_SPECIAL_CASE_HEAP_HEADER {
+ UINT8 Node; ///< Node ID for the the header
+ UINT8 Offset; ///< Offset for the target node
+} S3_SPECIAL_CASE_HEAP_HEADER;
+
+/// Flag for hob data save and restore
+typedef enum _MEM_HOB_DATA_TYPE {
+ S3_UMA_SIZE, ///< UMA size
+ S3_UMA_BASE, ///< UMA base
+ S3_UMA_MODE, ///< UMA mode
+ S3_SUB_4G_CACHE_TOP, ///< Sub 4G Cache Top
+ S3_SYSLIMIT, ///< System limit
+ S3_UMA_ATTRIBUTE, ///< UMA attribute
+ S3_VDDIO ///< VDDIO
+} MEM_HOB_DATA_TYPE;
+
+/// Header for heap space to store reduced memory internal data
+typedef struct _REDUCED_MEM_BLOCK_HEAP_HEADER {
+ UINT16 Version; ///< Version of header
+ UINT8 NumNodes; ///< Number of reduced NB blocks in the list
+} REDUCED_MEM_BLOCK_HEAP_HEADER;
+
+/// Reduced NB Block to store data during memory context save/restore
+typedef struct _REDUCED_NB_BLOCK {
+ UINT32 NodeMemSize; ///< Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node.
+ UINT32 NodeSysBase; ///< System base of this node
+ UINT8 NumDcts; ///< Number of reduced DCT blocks in the list
+} REDUCED_NB_BLOCK;
+
+/// Reduced DCT Block to store data during memory context save/restore
+typedef struct _REDUCED_DCT_BLOCK {
+ UINT8 Dct; ///< Dct Number
+ UINT32 DctMemSize; ///< Base[47:16], total DRAM size controlled by this DCT.
+ UINT8 EnabledChipSels; ///< Number of enabled chip selects on current DCT
+ UINT8 BankAddrMap; ///< Bank Address Mapping
+ BOOLEAN BkIntDis; ///< Bank interleave requested but not enabled on current DCT
+} REDUCED_DCT_BLOCK;
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+AmdMemS3Resume (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+MemS3ResumeInitNB (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+MemS3Deallocate (
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+MemFS3GetPciDeviceRegisterList (
+ IN PCI_DEVICE_DESCRIPTOR *Device,
+ OUT PCI_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+MemFS3GetCPciDeviceRegisterList (
+ IN CONDITIONAL_PCI_DEVICE_DESCRIPTOR *Device,
+ OUT CPCI_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+MemFS3GetMsrDeviceRegisterList (
+ IN MSR_DEVICE_DESCRIPTOR *Device,
+ OUT MSR_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+MemFS3GetCMsrDeviceRegisterList (
+ IN CONDITIONAL_MSR_DEVICE_DESCRIPTOR *Device,
+ OUT CMSR_REGISTER_BLOCK_HEADER **RegisterHdr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+AGESA_STATUS
+MemFS3GetDeviceList (
+ IN OUT DEVICE_BLOCK_HEADER **DeviceBlockHdrPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+MemFS3Wait10ns (
+ IN UINT32 Count,
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+BOOLEAN
+MemNS3ResumeUNb (
+ IN OUT S3_MEM_NB_BLOCK *S3NBPtr,
+ IN UINT8 NodeID
+ );
+
+VOID
+MemNS3GetBitFieldNb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+MemNS3SetBitFieldNb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+MemNS3RestoreScrubNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Node
+ );
+
+AGESA_STATUS
+MemS3InitNB (
+ IN OUT S3_MEM_NB_BLOCK **S3NBPtr,
+ IN OUT MEM_DATA_STRUCT **MemPtr,
+ IN OUT MEM_MAIN_DATA_BLOCK *mmData,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+MemNS3SetPreDriverCalUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+BOOLEAN
+MemNS3DctCfgSelectUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *Dct
+ );
+
+VOID
+MemNS3GetNBPStateDepRegUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+MemNS3SetNBPStateDepRegUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+MemNS3SaveNBRegisterUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+MemNS3RestoreNBRegisterUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+MemNS3SetMemClkFreqValUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+MemNS3ChangeMemPStateContextNb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+MemNS3ForceNBP0Unb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+MemNS3ReleaseNBPSUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+MemNSaveHobDataUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+
+VOID
+MemNRestoreHobDataUnb (
+ IN ACCESS_WIDTH AccessWidth,
+ IN PCI_ADDR Address,
+ IN OUT VOID *Value,
+ IN OUT VOID *ConfigPtr
+ );
+#endif //_MFS3_H_
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mftds.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mftds.h
new file mode 100644
index 0000000..e830bfb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mftds.h
@@ -0,0 +1,80 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mftds.h
+ *
+ * Memory Controller
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+
+#ifndef _MFTDS_H_
+#define _MFTDS_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+MemFInitTableDrive (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 time
+ );
+#endif /* _MFTDS_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mm.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mm.h
new file mode 100644
index 0000000..bdb759e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mm.h
@@ -0,0 +1,1500 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mm.h
+ *
+ * Common main functions
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 86704 $ @e \$Date: 2013-01-24 17:29:29 -0600 (Thu, 24 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MM_H_
+#define _MM_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+#define ALLOC_SOCKET_STRUCT_HANDLE 0
+#define ALLOC_DIE_STRUCT_HANDLE 1
+#define ALLOC_DCT_STRUCT_HANDLE 2
+#define ALLOC_CHL_STRUCT_HANDLE 3
+#define ALLOC_PLATFORM_PTR_HANDLE 4
+#define ALLOC_FORM_FACTOR_HANDLE 5
+#define ALLOC_TRN_DATA_HANDLE 6
+#define ALLOC_DIMM_DATA_HANDLE 7
+#define ALLOC_PAR_TRN_HANDLE 8
+#define ALLOC_NB_REG_TABLE 9
+#define ALLOC_DEVICE_INFO 10
+#define ALLOC_DATAEYES_HANDLE 11
+
+#define GENERATE_MEM_HANDLE(type, x, y, z) (\
+ AMD_MEM_MISC_HANDLES_START + (((type) << 18) + ((x) << 12) + ((y) << 6) + (z)) \
+)
+
+/// Heap handle for each supported family's NB register table
+typedef enum {
+ NbRegTabDR, ///< Heap handle for DR NB register table
+ NbRegTabDA, ///< Heap handle for DA NB register table
+ NbRegTabC32, ///< Heap handle for C32 NB register table
+ NbRegTabHY, ///< Heap handle for HY NB register table
+ NbRegTabKR, ///< Heap handle for KR NB register table
+ NbRegTabLN, ///< Heap handle for LN NB register table
+ NbRegTabON, ///< Heap handle for ON NB register table
+ NbRegTabOR, ///< Heap handle for OR NB register table
+ NbRegTabTN, ///< Heap handle for TN NB register table
+ NbRegTabKV, ///< Heap handle for KV NB register table
+ NbRegTabKB, ///< Heap handle for KB NB register table
+ NbRegTabBK, ///< Heap handle for BK NB register table
+ NbRegTabML, ///< Heap handle for ML NB register table
+ NumberOfNbRegTables ///< Number of families that have NB register tables
+} NB_REG_TAB_HANDLE;
+
+#define VOLT1_5_ENCODED_VAL 0
+#define VOLT1_35_ENCODED_VAL 1
+#define VOLT1_25_ENCODED_VAL 2
+#define CONVERT_VDDIO_TO_ENCODED(VddIo) (\
+ (VddIo == VOLT1_5) ? VOLT1_5_ENCODED_VAL : ((VddIo == VOLT1_35) ? VOLT1_35_ENCODED_VAL : ((VddIo == VOLT1_25) ? VOLT1_25_ENCODED_VAL : 0xFF)) \
+)
+#define CONVERT_ENCODED_TO_VDDIO(EncodedVal) (\
+ (EncodedVal == VOLT1_5_ENCODED_VAL) ? VOLT1_5 : ((EncodedVal == VOLT1_35_ENCODED_VAL) ? VOLT1_35 : ((EncodedVal == VOLT1_25_ENCODED_VAL) ? VOLT1_25 : VOLT_UNSUPPORTED)) \
+)
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// Bit field names used in memory initialization
+typedef enum {
+ BFDevVendorIDReg, ///< Bit field DevVendorIDReg
+ BFNodeID, ///< Bit field NodeID
+ BFNodeCnt, ///< Bit field NodeCnt
+
+ BFDramBaseReg0, ///< Bit field DramBaseReg0
+ BFDramBaseReg1, ///< Bit field DramBaseReg1
+ BFDramBaseReg2, ///< Bit field DramBaseReg2
+ BFDramBaseReg3, ///< Bit field DramBaseReg3
+ BFDramBaseReg4, ///< Bit field DramBaseReg4
+ BFDramBaseReg5, ///< Bit field DramBaseReg5
+ BFDramBaseReg6, ///< Bit field DramBaseReg6
+ BFDramBaseReg7, ///< Bit field DramBaseReg7
+
+ BFDramLimitReg0, ///< Bit field DramLimitReg0
+ BFDramLimitReg1, ///< Bit field DramLimitReg1
+ BFDramLimitReg2, ///< Bit field DramLimitReg2
+ BFDramLimitReg3, ///< Bit field DramLimitReg3
+ BFDramLimitReg4, ///< Bit field DramLimitReg4
+ BFDramLimitReg5, ///< Bit field DramLimitReg5
+ BFDramLimitReg6, ///< Bit field DramLimitReg6
+ BFDramLimitReg7, ///< Bit field DramLimitReg7
+
+ BFDramBaseHiReg0, ///< Bit field DramBaseHiReg0
+ BFDramBaseHiReg1, ///< Bit field DramBaseHiReg1
+ BFDramBaseHiReg2, ///< Bit field DramBaseHiReg2
+ BFDramBaseHiReg3, ///< Bit field DramBaseHiReg3
+ BFDramBaseHiReg4, ///< Bit field DramBaseHiReg4
+ BFDramBaseHiReg5, ///< Bit field DramBaseHiReg5
+ BFDramBaseHiReg6, ///< Bit field DramBaseHiReg6
+ BFDramBaseHiReg7, ///< Bit field DramBaseHiReg7
+
+ BFDramLimitHiReg0, ///< Bit field DramLimitHiReg0
+ BFDramLimitHiReg1, ///< Bit field DramLimitHiReg1
+ BFDramLimitHiReg2, ///< Bit field DramLimitHiReg2
+ BFDramLimitHiReg3, ///< Bit field DramLimitHiReg3
+ BFDramLimitHiReg4, ///< Bit field DramLimitHiReg4
+ BFDramLimitHiReg5, ///< Bit field DramLimitHiReg5
+ BFDramLimitHiReg6, ///< Bit field DramLimitHiReg6
+ BFDramLimitHiReg7, ///< Bit field DramLimitHiReg7
+
+ BFDramHoleAddrReg, ///< Bit field DramHoleAddrReg
+
+ BFDramRngRE0, ///< Bit field DramBaseReg0 RE
+ BFDramRngRE1, ///< Bit field DramBaseReg1 RE
+ BFDramRngRE2, ///< Bit field DramBaseReg2 RE
+ BFDramRngRE3, ///< Bit field DramBaseReg3 RE
+ BFDramRngRE4, ///< Bit field DramBaseReg4 RE
+ BFDramRngRE5, ///< Bit field DramBaseReg5 RE
+ BFDramRngRE6, ///< Bit field DramBaseReg6 RE
+ BFDramRngRE7, ///< Bit field DramBaseReg7 RE
+
+ BFDramRngWE0, ///< Bit field DramBaseReg0 WE
+ BFDramRngWE1, ///< Bit field DramBaseReg1 WE
+ BFDramRngWE2, ///< Bit field DramBaseReg2 WE
+ BFDramRngWE3, ///< Bit field DramBaseReg3 WE
+ BFDramRngWE4, ///< Bit field DramBaseReg4 WE
+ BFDramRngWE5, ///< Bit field DramBaseReg5 WE
+ BFDramRngWE6, ///< Bit field DramBaseReg6 WE
+ BFDramRngWE7, ///< Bit field DramBaseReg7 WE
+
+ BFDramRngDstNode0, ///< Bit field Dram Range0 DstNode
+ BFDramRngDstNode1, ///< Bit field Dram Range1 DstNode
+ BFDramRngDstNode2, ///< Bit field Dram Range2 DstNode
+ BFDramRngDstNode3, ///< Bit field Dram Range3 DstNode
+ BFDramRngDstNode4, ///< Bit field Dram Range4 DstNode
+ BFDramRngDstNode5, ///< Bit field Dram Range5 DstNode
+ BFDramRngDstNode6, ///< Bit field Dram Range6 DstNode
+ BFDramRngDstNode7, ///< Bit field Dram Range7 DstNode
+
+ BFCSBaseAddr0Reg, ///< Bit field CSBaseAddr0Reg
+ BFCSBaseAddr1Reg, ///< Bit field CSBaseAddr1Reg
+ BFCSBaseAddr2Reg, ///< Bit field CSBaseAddr2Reg
+ BFCSBaseAddr3Reg, ///< Bit field CSBaseAddr3Reg
+ BFCSBaseAddr4Reg, ///< Bit field CSBaseAddr4Reg
+ BFCSBaseAddr5Reg, ///< Bit field CSBaseAddr5Reg
+ BFCSBaseAddr6Reg, ///< Bit field CSBaseAddr6Reg
+ BFCSBaseAddr7Reg, ///< Bit field CSBaseAddr7Reg
+
+ BFCSMask0Reg, ///< Bit field CSMask0Reg
+ BFCSMask1Reg, ///< Bit field CSMask1Reg
+ BFCSMask2Reg, ///< Bit field CSMask2Reg
+ BFCSMask3Reg, ///< Bit field CSMask3Reg
+
+ BFRankDef0, ///< Bit field RankDef 0
+ BFRankDef1, ///< Bit field RankDef 1
+ BFRankDef2, ///< Bit field RankDef 2
+ BFRankDef3, ///< Bit field RankDef 3
+
+ BFDramControlReg, ///< Bit field DramControlReg
+ BFDramInitRegReg, ///< Bit field DramInitRegReg
+ BFDramBankAddrReg, ///< Bit field DramBankAddrReg
+ BFDramMRSReg, ///< Bit field DramMRSReg
+ BFDramTimingLoReg, ///< Bit field DramTimingLoReg
+ BFDramTimingHiReg, ///< Bit field DramTimingHiReg
+ BFDramConfigLoReg, ///< Bit field DramConfigLoReg
+ BFDramConfigHiReg, ///< Bit field DramConfigHiReg
+ BFDctAddlOffsetReg, ///< Bit field DctAddlOffsetReg
+ BFDctAddlDataReg, ///< Bit field DctAddlDataReg
+ BFDctAccessDone, ///< Bit field DctAccessDone
+ BFDctAccessError, ///< Bit field DctAccessError
+ BFDctExtraOffsetReg, ///< Bit field DctExtraOffsetReg
+ BFDctExtraDataReg, ///< Bit field DctExtraDataReg
+ BFDctExtraAccessDone, ///< Bit field DctExtraAccessDone
+ BFDramConfigMiscReg, ///< Bit field DramConfigMiscReg
+ BFDramCtrlMiscReg2, ///< Bit field DramCtrlMiscReg2
+ BFMctCfgHiReg, ///< Bit field MctCfgHiReg
+ BFTrcBufAdrPtrHi, ///< Bit field BFTrcBufAdrPtr
+ BFTrcBufDramLimitHi, ///< Bit field BFTrcBufDramLimit
+ BFTrcBufDramBaseHi, ///< Bit field BFTrcBufDramBase
+ BFMctCfgLoReg, ///< Bit field MctCfgLoReg
+ BFExtMctCfgLoReg, ///< Bit field ExtMctCfgLoReg
+ BFExtMctCfgHiReg, ///< Bit field ExtMctCfgHiReg
+ BFDcqBwThrotWm, ///< Bit field DcqBwThrotWm
+ BFPrefFiveConf, ///< Bit field PrefFiveConf
+ BFPrefFourConf, ///< Bit field PrefFourConf
+ BFDcqBwThrotWm1, ///< Bit field DcqBwThrotWm1
+ BFDcqBwThrotWm2, ///< Bit field DcqBwThrotWm2
+
+ BFCSMapCKE, ///< Bit field CSMapCKE
+ BFTrdrdBan, ///< Bit field TrdrdBan
+ BFTzqcs, ///< Bit field Tzqcs
+ BFTzqoper, ///< Bit field Tzqoper
+
+ BFDramHoleBase, ///< Bit field DramHoleBase
+ BFDramHoleOffset, ///< Bit field DramHoleOffset
+ BFDramMemHoistValid, ///< Bit field DramMemHoistValid
+ BFDramHtHoleValid, ///< Bit field BFDramHtHoleValid
+ BFDramHoleValid, ///< Bit field DramHoleValid
+ BFDramBaseAddr, ///< Bit field DramBaseAddr
+ BFDramIntlvSel, ///< Bit field DramIntlvSel
+ BFDramLimitAddr, ///< Bit field DramLimitAddr
+ BFDramCtrlBaseReg0, ///< Bit field DramCtrlBaseReg0
+ BFLgcyMmioHoleEn0, ///< Bit field LgcyMmioHoleEn0
+ BFDramCtrlLimitReg0, ///< Bit field DramCtrlLimitReg0
+ BFDramIntlvEn, ///< Bit field DramIntlvEn
+ BFMemPsSel, ///< Bit field MemPsSel
+ BFDctCfgSel, ///< Bit field DctCfgSel
+ BFRcvParErr, ///< Bit field RcvParErr
+
+ BFDctBaseReg0, ///< Bit field DctBaseReg0
+ BFDctBaseReg1, ///< Bit field DctBaseReg1
+ BFDctBaseReg2, ///< Bit field DctBaseReg2
+ BFDctBaseReg3, ///< Bit field DctBaseReg3
+
+ BFDctLimitReg0, ///< Bit field DctLimitReg0
+ BFDctLimitReg1, ///< Bit field DctLimitReg1
+ BFDctLimitReg2, ///< Bit field DctLimitReg2
+ BFDctLimitReg3, ///< Bit field DctLimitReg3
+
+ BFDctHighAddressOffsetReg0, ///< Bit field DctHighAddressOffsetReg0
+ BFDctHighAddressOffsetReg1, ///< Bit field DctHighAddressOffsetReg1
+ BFDctHighAddressOffsetReg2, ///< Bit field DctHighAddressOffsetReg2
+ BFDctHighAddressOffsetReg3, ///< Bit field DctHighAddressOffsetReg3
+
+ BFDctTriChannelInterleaveReg0, ///< Bit field DctTriChannelInterleaveReg0
+ BFDctTriChannelInterleaveReg1, ///< Bit field DctTriChannelInterleaveReg1
+ BFDctTriChannelInterleaveReg2, ///< Bit field DctTriChannelInterleaveReg2
+ BFDctTriChannelInterleaveReg3, ///< Bit field DctTriChannelInterleaveReg3
+ BFDctTriChannelInterleaveReg4, ///< Bit field DctTriChannelInterleaveReg4
+ BFDctTriChannelInterleaveReg5, ///< Bit field DctTriChannelInterleaveReg5
+ BFDctTriChannelInterleaveReg6, ///< Bit field DctTriChannelInterleaveReg6
+ BFDctTriChannelInterleaveReg7, ///< Bit field DctTriChannelInterleaveReg7
+
+ BF3DStackHeight0, ///< Bit field 3DStackHeight0
+ BF3DStackHeight1, ///< Bit field 3DStackHeight1
+ BF3DStackHeight2, ///< Bit field 3DStackHeight2
+ BF3DStackHeight3, ///< Bit field 3DStackHeight3
+
+ BFIdleCycLowLimit, ///< Bit field IdleCycLowLimit
+ BFIdleCycLimit, ///< Bit field IdleCycLimit
+ BFPendRefPayback, ///< Bit field PendRefPayback
+ BFProcOdtDis, ///< Bit field ProcOdtDis
+
+
+
+ BFMcaNbCtlReg, ///< Bit field McaNbCtlReg
+ BFDramEccEn, ///< Bit field DramEccEn
+ BFSyncOnUcEccEn, ///< Bit field SyncOnUcEccEn
+ BFEccSymbolSize, ///< Bit field EccSymbolSize
+ BFMcaNbStatusLoReg, ///< Bit field McaNbStatusLoReg
+ BFMcaNbStatusHiReg, ///< Bit field McaNbStatusHiReg
+ BFDramScrub, ///< Bit field DramScrub
+ BFL2Scrub, ///< Bit field L2Scrub
+ BFDcacheScrub, ///< Bit field DcacheScrub
+ BFL3Scrub, ///< Bit field L3Scrub
+ BFScrubReDirEn, ///< Bit field ScrubReDirEn
+ BFScrubAddrLoReg, ///< Bit field ScrubAddrLoReg
+ BFScrubAddrHiReg, ///< Bit field ScrubAddrHiReg
+ BFDisDramScrub, ///< Bit field DisDramScrub
+ BFC1ClkDivisor, ///< Bit field C1ClkDivisor
+ BFDisDatMsk, ///< Bit field DisDatMsk
+ BFNbFid, ///< Bit field NbFid
+ BFMTC1eEn, ///< Bit field MTC1eEn
+ BFL3Capable, ///< Bit field L3Capable
+ BFDisableL3, ///< Bit field DisableL3
+ BFEnhMemProtCap, ///< Bit field EnhMemProtCap
+ BFNbPsForceReq, ///< Bit field NbPsForceReq
+ BFNbPsCtrlDis, ///< Bit field NbPsCtrlDis
+ BFNbPsCap, ///< Bit field NbPsCap
+
+ BFNonSPDHi, ///< Bit field NonSPDHi
+ BFRdPtrInit, ///< Bit field RdPtrInit
+ BFAltVidC3MemClkTriEn, ///< Bit field AltVidC3MemClkTriEn
+ BFDqsRcvEnTrain, ///< Bit field DqsRcvEnTrain
+ BFEarlyArbEn, ///< Bit field EarlyArbEn
+ BFMaxLatency, ///< Bit field either MaxRdLat or MaxAsyncLat
+
+ BFMrsAddress, ///< Bit field MrsAddress
+ BFMrsBank, ///< Bit field MrsBank
+ BFMrsChipSel, ///< Bit field MrsChipSel
+ BFSendPchgAll, ///< Bit field SendPchgAll
+ BFSendAutoRefresh, ///< Bit field SendAutoRefresh
+ BFSendMrsCmd, ///< Bit field SendMrsCmd
+ BFDeassertMemRstX, ///< Bit field DeassertMemRstX
+ BFAssertCke, ///< Bit field AssertCke
+ BFSendZQCmd, ///< Bit field SendZQCmd
+ BFSendCtrlWord, ///< Bit field SendCtrlWord
+ BFEnDramInit, ///< Bit field EnDramInit
+ BFMrsLevel, ///< Bit field MrsLevel
+ BFMrsQoff, ///< Bit field MrsQoff
+ BFMrsAddressHi, ///< Bit field MrsAddress [17:13]
+
+ BFBurstCtrl, ///< Bit field BurstCtrl
+ BFDrvImpCtrl, ///< Bit field DrvImpCtrl
+ BFDramTerm_DDR3, ///< Bit field DramTerm_DDR3
+ BFDramTermDyn, ///< Bit field DramTermDyn
+ BFQoff, ///< Bit field Qoff
+ BFASR, ///< Bit field ASR
+ BFSRT, ///< Bit field SRT
+ BFTcwl, ///< Bit field Tcwl
+ BFPchgPDModeSel, ///< Bit field PchgPDModeSel
+ BFLowPowerDefault, ///< Bit field LowPowerDefault
+
+ BFTwrDDR3, ///< Bit field TwrDDR3
+ BFTcl, ///< Bit field Tcl
+ BFTrcd, ///< Bit field Trcd
+ BFTrp, ///< Bit field Trp
+ BFTrtp, ///< Bit field Trtp
+ BFTras, ///< Bit field Tras
+ BFTrc, ///< Bit field Trc
+ BFTwr, ///< Bit field Twr
+ BFTrrd, ///< Bit field Trrd
+ BFMemClkDis, ///< Bit field MemClkDis
+ BFDramTiming0, ///< Bit field BFDramTiming0
+ BFDramTiming1, ///< Bit field BFDramTiming1
+ BFDramTiming2, ///< Bit field BFDramTiming2
+ BFDramTiming3, ///< Bit field BFDramTiming3
+ BFDramTiming4, ///< Bit field BFDramTiming4
+ BFDramTiming5, ///< Bit field BFDramTiming5
+ BFDramTiming6, ///< Bit field BFDramTiming6
+ BFDramTiming10, ///< Bit field BFDramTiming10
+ BFDramNBP0, ///< Bit field BFDramNBP0
+
+ BFNonSPD, ///< Bit field NonSPD
+ BFTrwtWB, ///< Bit field TrwtWB
+ BFTrwtTO, ///< Bit field TrwtTO
+ BFTwtr, ///< Bit field Twtr
+ BFTwrrd, ///< Bit field Twrrd
+ BFTwrrdHi, ///< Bit field TwrrdHi
+ BFTwrwr, ///< Bit field Twrwr
+ BFTwrwrHi, ///< Bit field TwrwrHi
+ BFTrdrdSD, ///< Bit field TrdrdSD
+ BFTwrwrSD, ///< Bit field TwrwrSD
+ BFTwrrdSD, ///< Bit field TwrrdSD
+ BFTmod, ///< Bit field Tmod
+ BFTmrd, ///< Bit field Tmrd
+ BFRdOdtTrnOnDly, ///< Bit field RdOdtTrnOnDly
+ BFRdOdtOnDuration, ///< Bit field RdOdtOnDuration
+ BFWrOdtTrnOnDly, ///< Bit field WrOdtTrnOnDly
+ BFWrOdtOnDuration, ///< Bit field WrOdtOnDuration
+ BFPrtlChPDDynDly, ///< Bit field PrtlChPDDynDly
+
+ BFAggrPDDelay, ///< Bit field AggrPDDelay
+ BFPchgPDEnDelay, ///< Bit field PchgPDEnDelay
+
+ BFTrdrd, ///< Bit field Trdrd
+ BFTrdrdHi, ///< Bit field TrdrdHi
+ BFTref, ///< Bit field Tref
+ BFDisAutoRefresh, ///< Bit field DisAutoRefresh
+ BFTrfc0, ///< Bit field Trfc0
+ BFTrfc1, ///< Bit field Trfc1
+ BFTrfc2, ///< Bit field Trfc2
+ BFTrfc3, ///< Bit field Trfc3
+
+ BFInitDram, ///< Bit field InitDram
+ BFExitSelfRef, ///< Bit field ExitSelfRef
+ BFDramTerm, ///< Bit field DramTerm
+ BFParEn, ///< Bit field ParEn
+ BFBurstLength32, ///< Bit field BurstLength32
+ BFWidth128, ///< Bit field Width128
+ BFX4Dimm, ///< Bit field X4Dimm
+ BFDimmEccEn, ///< Bit field DimmEccEn
+ BFUnBuffDimm, ///< Bit field UnBuffDimm
+ BFEnterSelfRef, ///< Bit field EnterSelfRef
+ BFDynPageCloseEn, ///< Bit field DynPageCloseEn
+ BFIdleCycInit, ///< Bit field IdleCycInit
+ BFFreqChgInProg, ///< Bit field FreqChgInProg
+ BFForceAutoPchg, ///< Bit field ForceAutoPchg
+ BFStagRefEn, ///< Bit field StagRefEn
+ BFPendRefPaybackS3En, ///< Bit field PendRefPaybackS3En
+ BFEnDispAutoPrecharge, ///< Bit field EnDispAutoPrecharge
+ BFDisDllShutdownSR, ///< Bit field DisDllShutdownSR
+ BFDisSscClkGateData, ///< Bit field DisSscClkGateData
+ BFDisSscClkGateCmdAddr, ///< Bit field DisSscClkGateCmdAddr
+ BFDisSimulRdWr, ///< Bit field DisSimulRdWr
+
+ BFMemClkFreq, ///< Bit field MemClkFreq
+ BFMemClkFreqVal, ///< Bit field MemClkFreqVal
+ BFDdr3Mode, ///< Bit field Ddr3Mode
+ BFLegacyBiosMode, ///< Bit field LegacyBiosMode
+ BFZqcsInterval, ///< Bit field ZqcsInterval
+ BFRDqsEn, ///< Bit field RDqsEn
+ BFDisDramInterface, ///< Bit field DisDramInterface
+ BFPowerDownEn, ///< Bit field PowerDownEn
+ BFPowerDownMode, ///< Bit field PowerDownMode
+ BFFourRankSoDimm, ///< Bit field FourRankSoDimm
+ BFDcqArbBypassEn, ///< Bit field DcqArbBypassEn
+ BFFourRankRDimm, ///< Bit field FourRankRDimm
+ BFSlowAccessMode, ///< Bit field SlowAccessMode
+ BFBankSwizzleMode, ///< Bit field BankSwizzleMode
+ BFDcqBypassMax, ///< Bit field DcqBypassMax
+ BFFourActWindow, ///< Bit field FourActWindow
+ BFDphyMemPsSelEn, ///< Bit field BFDphyMemPsSelEn
+
+ BFODTSEn, ///< Bit field ODTSEn
+ BFCmdThrottleMode, ///< Bit field CmdThrottleMode
+ BFBwCapEn, ///< Bit field BwCapEn
+
+ BFDdr3FourSocketCh, ///< Bit field Ddr3FourSocketCh
+ BFSubMemclkRegDly, ///< Bit field SubMemclkRegDly
+ BFOdtSwizzle, ///< Bit field OdtSwizzle
+ BFProgOdtEn, ///< Bit field ProgOdtEn
+ BFCtrlWordCS, ///< Bit field CtrlWordCS
+ BFRefChCmdMgtDis, ///< Bit field RefChCmdMgtDis
+ BFFastSelfRefEntryDis, ///< Bit field FastSelfRefEntryDis
+ BFPrtlChPDEnhEn, ///< Bit field PrtlChPDEnhEn
+ BFAggrPDEn, ///< Bit field AggrPDEn
+ BFDataTxFifoWrDly, ///< Bit field DataTxFifoWrDly
+ BFWrDqDqsEarly, ///< Bit field WrDqDqsEarly
+ BFCSMux45, ///< Bit field CSMux45
+ BFCSMux67, ///< Bit field CSMux67
+ BFLrDimmMrsCtrl, ///< Bit field LrDimmMrsCtrl
+ BFExtendedParityEn, ///< Bit field ExtendedParityEn
+ BFLrDimmEnhRefEn, ///< Bit field LrDimmEnhRefEn
+ BFCSTimingMux67, ///< Bit field CSTimingMux67
+ BFLrDimmErrOutMonEn, ///< Bit field LrDimmErrOutMonEn
+
+ BFIntLvRgnSwapEn, ///< Bit field IntLvRgnSwapEn
+ BFIntLvRgnBaseAddr, ///< Bit field IntLvRgnBaseAddr
+ BFIntLvRgnLmtAddr, ///< Bit field IntLvRgnLmtAddr
+ BFIntLvRgnSize, ///< Bit field IntLvRgnSize
+
+ BFDctSelHiRngEn, ///< Bit field DctSelHiRngEn
+ BFDctSelHi, ///< Bit field DctSelHi
+ BFDctSelIntLvEn, ///< Bit field DctSelIntLvEn
+ BFMemClrInit, ///< Bit field MemClrInit
+ BFDctGangEn, ///< Bit field DctGangEn
+ BFDctDatIntLv, ///< Bit field DctDatIntLv
+ BFDctSelIntLvAddr, ///< Bit field DctSelIntLvAddr
+ BFDctSelIntLvAddrHi, ///< Bit field DctSelIntLvAddrHi
+ BFParallelMemClrEn, ///< Bit field ParallelMemClrEn
+ BFDramEnabled, ///< Bit field DramEnabled
+ BFMemClrBusy, ///< Bit field MemClrBusy
+ BFMemCleared, ///< Bit field MemCleared
+ BFDctSelBaseAddr, ///< Bit field DctSelBaseAddr
+ BFDctSelBaseOffset, ///< Bit field DctSelBaseOffset
+ BFBankSwapAddr8En, ///< Bit field DctSelBankSwap
+
+ BFAdapPrefMissRatio, ///< Bit field AdapPrefMissRatio
+ BFAdapPrefPosStep, ///< Bit field AdapPrefPosStep
+ BFAdapPrefNegStep, ///< Bit field AdapPrefNegStep
+ BFCohPrefPrbLmt, ///< Bit field CohPrefPrbLmt
+
+ BFFlushWrOnS3StpGnt, ///< Bit field FlushWrOnS3StpGnt
+
+ BFPrefDramTrainDone, ///< Bit field PrefDramTrainDone
+ BFWrDramTrainMode, ///< Bit field WrDramTrainMode
+ BFMctPrefReqLimit, ///< Bit field MctPrefReqLimit
+ BFPrefDramTrainMode, ///< Bit field PrefDramTrainMode
+ BFDctWrLimit, ///< Bit field DctWrLimit
+ BFMctWrLimit, ///< Bit field MctWrLimit
+ BFDramTrainPdbDis, ///< Bit field DramTrainPdbDis
+ BFTrainLength, ///< Bit field TrainLength
+ BFRdTrainGo, ///< Bit field RdTrainGo
+ BFWrTrainGo, ///< Bit field WrTrainGo
+ BFWrTrainAdrPtrLo, ///< Bit field WrTrainAdrPtrLo
+ BFWrTrainAdrPtrHi, ///< Bit field WrTrainAdrPtrHi
+ BFWrTrainBufAddr, ///< Bit field WrTrainBufAddr
+ BFWrTrainBufDat, ///< Bit field WrTrainBufDat
+ BFFlushWr, ///< Bit field FlushWr
+ BFFlushWrOnStpGnt, ///< Bit field FlushWrOnStpGnt
+ BFPrefCpuDis, ///< Bit field PrefCpuDis
+ BFPrefIoDis, ///< Bit field PrefIoDis
+ BFTrainCmpSts, ///< Bit field TrainCmpSts
+ BFTrainCmpSts2, ///< Bit field TrainCmpSts2
+ BFTcbModeEn, ///< Bit field TcbModeEn
+ BFTraceModeEn, ///< Bit field TraceModeEn
+
+ BFAddrCmdDrvStren, ///< Bit field AddrCmdDrvStren
+ BFDataDrvStren, ///< Bit field DataDrvStren
+ BFCkeDrvStren, ///< Bit field CkeDrvStren
+ BFCsOdtDrvStren, ///< Bit field CsOdtDrvStren
+ BFClkDrvStren, ///< Bit field ClkDrvStren
+ BFDqsDrvStren, ///< Bit field DqsDrvStren
+ BFProcOdt, ///< Bit field ProcOdt
+ BFODCControl, ///< Bit field ODCControl
+ BFAddrTmgControl, ///< Bit field AddrTmgControl
+ BFAddrCmdFineDelay, ///< Bit field AddrCmdFineDelay
+
+ BFWrtLvTrEn, ///< Bit field WrtLvTrEn
+ BFWrtLvTrMode, ///< Bit field WrtLvTrMode
+ BFPhyFenceTrEn, ///< Bit field PhyFenceTrEn
+ BFTrDimmSel, ///< Bit field TrDimmSel
+ BFTrNibbleSel, ///< Bit field TrNibbleSel
+ BFFenceTrSel, ///< Bit field FenceTrSel
+ BFWrLvOdt, ///< Bit field WrLvOdt
+ BFWrLvOdtEn, ///< Bit field WrLvOdtEn
+ BFDqsRcvTrEn, ///< Bit field DqsRcvTrEn
+ BFDisAutoComp, ///< Bit field DisAutoComp
+ BFWrtLvErr, ///< Bit field WrtLvErr
+ BFODTAssertionCtl, ///< Bit field ODTAssertionCtl
+ BFNibbleTrainModeEn, ///< Bit field NibbleTrainModeEn
+ BFRankTrainModeEn, ///< Bit field RankTrainModeEn
+ BFPllMult, ///< Bit field PllMult
+ BFPllDiv, ///< Bit field PllDiv
+ BFDramPhyCtlReg, ///< Bit field Dram Phy Control Register
+
+ BFDramPhyStatusReg, ///< Bit field DramPhyStatusReg
+
+ BFD3Cmp2PCal, ///< Bit field D3Cmp2PCal
+ BFD3Cmp2NCal, ///< Bit field D3Cmp2NCal
+ BFD3Cmp1PCal, ///< Bit field D3Cmp1PCal
+ BFD3Cmp1NCal, ///< Bit field D3Cmp1NCal
+ BFD3Cmp0PCal, ///< Bit field D3Cmp0PCal
+ BFD3Cmp0NCal, ///< Bit field D3Cmp0NCal
+
+ BFPhyFence, ///< Bit field PhyFence
+ BFODTTri, ///< Bit field ODTTri
+ BFCKETri, ///< Bit field CKETri
+ BFChipSelTri, ///< Bit field ChipSelTri
+ BFPhyRODTCSLow, ///< Bit field PhyRODTCSLow
+ BFPhyRODTCSHigh, ///< Bit field PhyRODTCSHigh
+ BFPhyWODTCSLow, ///< Bit field PhyWODTCSLow
+ BFPhyWODTCSHigh, ///< Bit field PhyWODTCSHigh
+ BFUSPLLCtlAll, ///< Bit field USPLLCtlAll
+ BFDSPLLCtlAll, ///< Bit field DSPLLCtlAll
+ BFUSNibbleAlignEn, ///< Bit field USNibbleAlignEn
+ BFChnLinitClkEn, ///< Bit field ChnLinitClkEn
+
+ BFTSLinkSelect, ///< Bit field TSLinkSelect
+ BFTS2BitLockEn, ///< Bit field TS2BitLockEn
+ BFTS2En, ///< Bit field TS2En
+ BFTS1En, ///< Bit field TS1En
+ BFTS0LinkStarEn, ///< Bit field TS0LinkStarEn
+ BFTS0En, ///< Bit field TS0En
+
+ BFLinkTrainData, ///< Bit field LinkTrainData
+
+ BFRstRxFifoPtrs, ///< Bit field RstRxFifoPtrs
+ BFRxFifoPtrInit, ///< Bit field RxFifoPtrInit
+ BFRstTxFifoPtrs, ///< Bit field RstTxFifoPtrs
+ BFTxFifoPtrInit, ///< Bit field TxFifoPtrInit
+
+ BFLpbkCount, ///< Bit field LpbkCount
+ BFLpbkMap, ///< Bit field LpbkMap
+ BFSendLpbkMaintCmd, ///< Bit field SendLpbkMaintCmd
+ BFLpbkData, ///< Bit field LpbkData
+
+ BFMbRdPtrEn, ///< Bit field MbRdPtrEn
+ BFLnkLpBkLat, ///< Bit field LnkLpBkLat
+ BFLpbkRndTripLatDone, ///< Bit field LpbkRndTripLatDone
+ BFLnkLatTrainEn, ///< Bit field LnkLatTrainEn
+
+ BFDsPhyReset, ///< Bit field DsPhyReset
+ BFLinkReset, ///< Bit field LinkReset
+
+ BFPllLockTime, ///< Bit field PllLockTime
+ BFPllRegWaitTime, ///< Bit field PllRegWaitTime
+ BFNclkFreqDone, ///< Bit field NclkFreqDone
+ BFNbPs0NclkDiv, ///< Bit field NbPs0NclkDiv
+ BFNbPs1NclkDiv, ///< Bit field NbPs1NclkDiv
+ BFNbPsCsrAccSel, ///< Bit field NbPsCsrAccSel
+ BFNbPsDbgEn, ///< Bit field NbPsDbgEn
+ BFNclkRampWithDllRelock, ///< Bit field NclkRampWithDllRelock
+
+ BFOnLineSpareControl, ///< Bit field OnLineSpareControl
+ BFDdrMaxRate, ///< Bit field DdrMaxRate
+
+ BFPhyDctCfgSelMode, ///< Bit field PhyDctCfgSelMode
+ BFNbPstateDis, ///< Bit field NbPstateDis
+ BFNbPsSel, ///< Bit field NbPsSel
+ BFNbPstateCtlReg, ///< Bit field NB Pstate Control register
+ BFSwNbPstateLoDis, ///< Bit field SwNbPstateLoDis
+ BFNbPstateLo, ///< Bit field NbPstateLo
+ BFNbPstateHi, ///< Bit field NbPstateHi
+ BFNbPstateMaxVal, ///< Bit field NbPstateMaxVal
+ BFCurNbPstate, ///< Bit field NbCurNbPstate
+
+ BFC6Base, ///< Bit field C6Base
+ BFC6DramLock, ///< Bit field C6DramLock
+ BFCC6SaveEn, ///< Bit field CC6SaveEn
+ BFCoreStateSaveDestNode, ///< Bit field CoreStateSaveDestNode
+
+ BFRxPtrInitReq, ///< Bit field RxPtrInitReq
+ BFAddrCmdTriEn, ///< Bit field AddrCmdTriEn
+ BFForceCasToSlot0, ///< Bit field ForceCasToSlot0
+ BFDisCutThroughMode, ///< Bit field DisCutThroughMode
+ BFDbeSkidBufDis, ///< Bit field DbeSkidBufDis
+ BFDbeGskMemClkAlignMode, ///< Bit field DbeGskMemClkAlignMode
+ BFEnCpuSerRdBehindNpIoWr, ///< Bit field EnCpuSerRdBehindNpIoWr
+ BFDRAMPhyDLLControl, ///< Bit field DRAMPhyDLLControl
+ BFRxDLLWakeupTime, ///< Bit field RxDllWakeupTime
+ BFRxCPUpdPeriod, ///< Bit field RxCPUpdPeriod
+ BFRxMaxDurDllNoLock, ///< Bit field RxMaxDurDllNoLock
+ BFTxDLLWakeupTime, ///< Bit field TxDllWakeupTime
+ BFTxCPUpdPeriod, ///< Bit field TxCPUpdPeriod
+ BFTxMaxDurDllNoLock, ///< Bit field TxMaxDurDllNoLock
+ BFEnRxPadStandby, ///< Bit field EnRxPadStandby
+ BFMaxSkipErrTrain, ///< Bit field MaxSkipErrTrain
+ BFSlotSel, ///< Bit field SlotSel
+ BFSlot1ExtraClkEn, ///< Bit field Slot1ExtraClkEn
+ BFPtrInitReq, ///< Bit field PtrInitReq
+ BFDccPgSsBusDis, ///< Bit field DccPgSsBusDis
+ BFGsyncDis, ///< Bit field GsyncDis
+ BFChanVal, ///< Bit field ChanVal
+ BFDctCfgBcEn, ///< Bit field DctCfgBcEn
+
+ BFMemTempHot, ///< Bit field MemTempHot
+ BFDoubleTrefRateEn, ///< Bit field DoubleTrefRateEn
+
+ BFAcpiPwrStsCtrlHi, ///< Bit field BFAcpiPwrStsCtrlHi
+ BFDramSrHysEn, ///< Bit field BFDramSrHysEn
+ BFDramSrHys, ///< Bit field BFDramSrHys
+ BFMemTriStateEn, ///< Bit field BFMemTriStateEn
+ BFDramSrEn, ///< Bit field BFDramSrEn
+
+ BFDeassertCke, ///< Bit field BFDeassertCke
+ BFFourRankRDimm0, ///< Bit field BFFourRankRDimm0
+ BFFourRankRDimm1, ///< Bit field BFFourRankRDimm1
+ BFTwrwrSdSc, ///< Bit field BFTwrwrSdSc
+ BFTwrwrSdDc, ///< Bit field BFTwrwrSdDc
+ BFTwrwrDd, ///< Bit field BFTwrwrDd
+ BFTrdrdSdSc, ///< Bit field BFTrdrdSdSc
+ BFTrdrdSdDc, ///< Bit field BFTrdrdSdDc
+ BFTrdrdDd, ///< Bit field BFTrdrdDd
+ BFTstag0, ///< Bit field BFTstag0
+ BFTstag1, ///< Bit field BFTstag1
+ BFTstag2, ///< Bit field BFTstag2
+ BFTstag3, ///< Bit field BFTstag3
+
+ BFDataPatGenSel, ///< Bit field DataPatGenSel
+ BFActPchgGenEn, ///< Bit field ActPchgGenEn
+ BFShmooRdDqsDly, ///< Bit field ShmooRdDqsDly
+
+ BFReverseLoopbackEn, ///< Bit field BFReverseLoopbackEn
+ BFCmdSendInProg, ///< Bit field CmdSendInProg
+ BFSendCmd, ///< Bit field SendCmd
+ BFTestStatus, ///< Bit field TestStatus
+ BFCmdTgt, ///< Bit field CmdTgt
+ BFCmdType, ///< Bit field CmdType
+ BFStopOnErr, ///< Bit field StopOnErr
+ BFResetAllErr, ///< Bit field ResetAllErr
+ BFCmdTestEnable, ///< Bit field CmdTestEnable
+ BFTgtChipSelectA, ///< Bit field TgtChipSelectA
+ BFTgtBankA, ///< Bit field TgtBankA
+ BFTgtAddressHiA, ///< Bit field TgtAddressHiA
+ BFTgtAddressA, ///< Bit field TgtAddressA
+ BFTgtChipSelectB, ///< Bit field TgtChipSelectB
+ BFTgtBankB, ///< Bit field TgtBankB
+ BFTgtAddressHiB, ///< Bit field TgtAddressHiB
+ BFTgtAddressB, ///< Bit field TgtAddressB
+ BFBubbleCnt2, ///< Bit field BubbleCnt2
+ BFBubbleCnt, ///< Bit field BubbleCnt
+ BFCmdStreamLen, ///< Bit field CmdStreamLen
+ BFCmdCount, ///< Bit field CmdCount
+ BFErrDqNum, ///< Bit field ErrDQNum
+ BFErrCnt, ///< Bit field ErrCnt
+ BFNibbleErrSts, ///< Bit field NibbleErrSts
+ BFNibbleErr180Sts, ///< Bit field NibbleErr180Sts
+ BFDataPrbsSeed, ///< Bit field DataPrbsSeed
+ BFDramDqMaskLow, ///< Bit field DramDqMaskLow
+ BFDramDqMaskHigh, ///< Bit field DramDqMaskHigh
+ BFDramEccMask, ///< Bit field DramEccMask
+ BFDQPatOvrEn0, ///< Bit field DQPatOvrEn0
+ BFDQPatOvrEn1, ///< Bit field DQPatOvrEn1
+ BFXorPatOvr, ///< Bit field XorPatOvr
+ BFPatOvrVal, ///< Bit field PatOvrVal
+ BFEccPatOvrEn, ///< Bit field EccPatOvrEn
+ BFSendActCmd, ///< Bit field SendActCmd
+ BFSendPchgCmd, ///< Bit field SendPchgCmd
+ BFCmdChipSelect, ///< Bit field CmdChipSelect
+ BFCmdBank, ///< Bit field CmdBank
+ BFCmdAddress, ///< Bit field CmdAddress
+ BFErrBeatNum, ///< Bit Field ErrBeatNum
+ BFErrCmdNum, ///< Bit field BFErrCmdNum
+ BFDQErrLow, ///< Bit field DQSErrLow
+ BFDQErrHigh, ///< Bit field DQSErrHigh
+ BFEccErr, ///< Bit field EccErr
+ BFFastMstateDis, ///< Bit field FastMstateDis
+ BFDramUserDataPattern0, ///< Bit field DramUserDataPattern0
+ BFDramUserDataPattern1, ///< Bit field DramUserDataPattern1
+ BFDramUserDataPattern2, ///< Bit field DramUserDataPattern2
+ BFDramUserDataPattern3, ///< Bit field DramUserDataPattern3
+ BFActPchgSeq, ///< Bit field ActPchgSeq
+ BFActPchgCmdMin, ///< Bit field ActPchgCmdMin
+ BFDramCommandReg4, ///< Bit field DramCommandReg4
+ BFDramCommandReg5, ///< Bit field DramCommandReg5
+ BFNibbleErrStsSel, ///< Bit field NibbleErrStsSel
+ BFErrStsDly, ///< Bit field ErrStsDly
+ BFErrStsDly180, ///< Bit field ErrStsDly180
+
+ /* Bit fields for workarounds */
+ BFErr263, ///< Bit field Err263
+ BFErr350, ///< Bit field Err350
+ BFErr322I, ///< Bit field Err322I
+ BFErr322II, ///< Bit field Err322II
+ BFErratum468WorkaroundNotRequired, ///< Bit field Erratum468WorkaroundNotRequired
+
+ /* Bit fields for Phy */
+ BFEccDLLConf, ///< Bit field EccDLLConf
+ BFProcOdtAdv, ///< Bit field ProcOdtAdv
+ BFEccDLLPwrDnConf, ///< Bit field EccDLLPwrDnConf
+ BFDataCtlPipePclkGateEn, ///< Bit field DataCtlPipePclkGateEn
+ BFPchgPdPclkGateEn, ///< Bit field PchgPdPclkGateEn
+ BFTxPclkGateEn, ///< Bit field TxPclkGateEn
+ BFPhyPLLLockTime, ///< Bit field PhyPLLLockTime
+ BFPhyDLLLockTime, ///< Bit field PhyDLLLockTime
+ BFSkewMemClk, ///< Bit field SkewMemClk
+ BFPhyDLLControl, ///< Bit field BFPhyDLLControl
+ BFPhy0x0D080F0C, ///< Bit field BFPhy0x0D080F0C
+ BFPhy0x0D080F10, ///< Bit field BFPhy0x0D080F10
+ BFPhy0x0D080F11, ///< Bit field BFPhy0x0D080F11
+ BFPhy0x0D088F30, ///< Bit field BFPhy0x0D088F30
+ BFPhy0x0D08C030, ///< Bit field BFPhy0x0D08C030
+ BFPhy0x0D082F30, ///< Bit field BFPhy0x0D082F30
+ BFDiffTimingEn, ///< Bit Field DiffTimingEn
+ BFFence, ///< Bit Field Fence
+ BFDelay, ///< Bit Field Delay
+ BFFenceValue, ///< Bit Field FenceValue
+
+ BFTxP, ///< Bit Field TxP
+ BFTxN, ///< Bit Field TxN
+ BFPhy0x0D0F0F0B, ///< Bit Field BFPhy0x0D0F0F0B
+ BFPhy0x0D0F0F07, ///< Bit Field BFPhy0x0D0F0F07
+ BFPhy0x0D0F0F03, ///< Bit Field BFPhy0x0D0F0F03
+
+ BFPhy0x0D040F3E, ///< Bit field BFPhy0x0D040F3E
+ BFPhy0x0D042F3E, ///< Bit field BFPhy0x0D042F3E
+ BFPhy0x0D048F3E, ///< Bit field BFPhy0x0D048F3E
+ BFPhy0x0D04DF3E, ///< Bit field BFPhy0x0D04DF3E
+
+ BFPhyClkDllFine0, ///< Bit field ClkDllFineDly 0
+ BFPhyClkDllFine1, ///< Bit field ClkDllFineDly 1
+
+ BFPhyClkConfig0, ///< Bit field ClkConfig0
+ BFPhyClkConfig1, ///< Bit field ClkConfig1
+ BFPhyClkConfig2, ///< Bit field ClkConfig2
+ BFPhyClkConfig3, ///< Bit field ClkConfig3
+
+ BFPhy0x0D0F0F13, ///< Bit field BFPhy0x0D0F0F13
+ BFPhy0x0D0F0F13Bit0to7, ///< Bit field BFPhy0x0D0F0F13Bit0to7
+ BFPhy0x0D0F0830, ///< Bit field BFPhy0x0D0F0830
+ BFPhy0x0D07812F, ///< Bit field BFPhy0x0D0F8108
+
+ BFDataRxVioLvl, ///< Bit field DataRxVioLvl
+ BFClkRxVioLvl, ///< Bit field ClkRxVioLvl
+ BFCmdRxVioLvl, ///< Bit field CmdRxVioLvl
+ BFAddrRxVioLvl, ///< Bit field AddrRxVioLvl
+ BFCmpVioLvl, ///< Bit field CmpVioLvl
+ BFCsrComparator, ///< Bit field CsrComparator
+ BFAlwaysEnDllClks, ///< Bit field AlwaysEnDllClks
+ BFPhy0x0D0FE00A, ///< Bit field Phy0x0D0FE00A
+ BFPllPdMode, ///< Bit fields SelCsrPllPdMode and CsrPhySrPllPdMode
+
+ BFDataFence2, ///< Bit field DataFence2
+ BFClkFence2, ///< Bit field ClkFence2
+ BFCmdFence2, ///< Bit field CmdFence2
+ BFAddrFence2, ///< Bit field AddrFence2
+
+ BFDataByteDMConf, ///< Bit field DataByteDMConf
+
+ BFAddrCmdTri, ///< Bit field BFAddrCmdTri
+ BFLowPowerDrvStrengthEn, ///< Bit field BFLowPowerDrvStrengthEn
+ BFLevel, ///< Bit field Level
+
+ BFDbeGskFifoNumerator, ///< Bit field DbeGskFifoNumerator
+ BFDbeGskFifoDenominator, ///< Bit field DbeGskFifoDenominator
+ BFDataTxFifoSchedDlyNegSlot0, ///< Bit field DataTxFifoSchedDlyNegSlot0
+ BFDataTxFifoSchedDlyNegSlot1, ///< Bit field DataTxFifoSchedDlyNegSlot1
+ BFDataTxFifoSchedDlySlot0, ///< Bit field DataTxFifoSchedDlySlot0
+ BFDataTxFifoSchedDlySlot1, ///< Bit field DataTxFifoSchedDlySlot1
+
+ BFDisablePredriverCal, ///< Bit field DisablePredriverCal
+ BFDataByteTxPreDriverCal, ///< Bit field DataByteTxPreDriverCal
+ BFPOdtOff, ///< Bit field POdtOff
+ BFDataByteTxPreDriverCal2Pad1, ///< Bit field DataByteTxPreDriverCal2Pad1
+ BFDataByteTxPreDriverCal2Pad2, ///< Bit field DataByteTxPreDriverCal2Pad2
+ BFCmdAddr0TxPreDriverCal2Pad1, ///< Bit field CmdAddr0TxPreDriverCal2Pad1
+ BFCmdAddr0TxPreDriverCal2Pad2, ///< Bit field CmdAddr0TxPreDriverCal2Pad2
+ BFCmdAddr1TxPreDriverCal2Pad1, ///< Bit field CmdAddr1TxPreDriverCal2Pad1
+ BFCmdAddr1TxPreDriverCal2Pad2, ///< Bit field CmdAddr1TxPreDriverCal2Pad2
+ BFAddrTxPreDriverCal2Pad1, ///< Bit field AddrTxPreDriverCal2Pad1
+ BFAddrTxPreDriverCal2Pad2, ///< Bit field AddrTxPreDriverCal2Pad2
+ BFAddrTxPreDriverCal2Pad3, ///< Bit field AddrTxPreDriverCal2Pad3
+ BFAddrTxPreDriverCal2Pad4, ///< Bit field AddrTxPreDriverCal2Pad4
+ BFCmdAddr0TxPreDriverCalPad0, ///< Bit field CmdAddr0TxPreDriverCalPad0
+ BFCmdAddr1TxPreDriverCalPad0, ///< Bit field CmdAddr1TxPreDriverCalPad0
+ BFAddrTxPreDriverCalPad0, ///< Bit field AddrTxPreDriverCalPad0
+ BFClock0TxPreDriverCalPad0, ///< Bit field Clock0TxPreDriverCalPad0
+ BFClock1TxPreDriverCalPad0, ///< Bit field Clock1TxPreDriverCalPad0
+ BFClock2TxPreDriverCalPad0, ///< Bit field Clock2TxPreDriverCalPad0
+ BFPNOdtCal, ///< Bit field P/NOdtCal
+ BFPNDrvCal, ///< Bit field P/NDrvCal
+ BFCalVal, ///< Bit field CalVal
+ BFPStateToAccess, ///< Bit field PStateToAccess
+
+ BFTxp, ///< Bit field Txp
+ BFTxpdll, ///< Bit field Txpdll
+ BFDramPwrMngm1Reg, ///< Bit field DRAM Power Management 1 register
+ BFL3ScrbRedirDis, ///< Bit field L3ScrbRedirDis
+ BFDQOdt03, ///< Bit field DQ Odt 0-3
+ BFDQOdt47, ///< Bit field DQ Odt 4-7
+ BFTriDM, ///< Bit field TriDM
+
+ BFTcksrx, ///< Bit field Tcksrx
+ BFTcksre, ///< Bit field Tcksre
+ BFTckesr, ///< Bit field Tckesr
+ BFTpd, ///< Bit field Tpd
+
+ BFFixedErrataSkipPorFreqCap, ///< Bit field FixedErrataSkipPorFreqCap
+ BFPerRankTimingEn, ///< Bit field PerRankTimingEn
+ BFMemPhyPllPdMode, ///< Bit field MemPhyPllPdMode
+ BFBankSwap, ///< Bit field BankSwap
+ BFBwCapCmdThrottleMode, ///< Bit field BwCapCmdThrottleMode
+ BFRxChMntClkEn, ///< Bit field RxChMntClkEn
+ BFBlockRxDqsLock, ///< Bit field BlockRxDqsLock
+ BFRxSsbMntClkEn, ///< Bit field RxSsbMntClkEn
+ BFPhyPSMasterChannel, ///< Bit field PhyPSMasterChannel
+
+ BFObsrvVrefSel, ///< Bit field BFObsrvVrefSel
+ BFVrefSel, ///< Bit field VrefSel
+ BFVrefDAC, ///< Bit field VrefDAC
+ BFDataByteRxDqsDLLDimm0Lane0, ///< Bit field DataByteRxDqsDLL DIMM0 Lane 0
+ BFDataByteRxDqsDLLDimm0Lane1, ///< Bit field DataByteRxDqsDLL DIMM0 Lane 1
+ BFDataByteRxDqsDLLDimm0Lane2, ///< Bit field DataByteRxDqsDLL DIMM0 Lane 2
+ BFDataByteRxDqsDLLDimm0Lane3, ///< Bit field DataByteRxDqsDLL DIMM0 Lane 3
+ BFDataByteRxDqsDLLDimm0Lane4, ///< Bit field DataByteRxDqsDLL DIMM0 Lane 4
+ BFDataByteRxDqsDLLDimm0Lane5, ///< Bit field DataByteRxDqsDLL DIMM0 Lane 5
+ BFDataByteRxDqsDLLDimm0Lane6, ///< Bit field DataByteRxDqsDLL DIMM0 Lane 6
+ BFDataByteRxDqsDLLDimm0Lane7, ///< Bit field DataByteRxDqsDLL DIMM0 Lane 7
+ BFDataByteRxDqsDLLDimm0Lane8, ///< Bit field DataByteRxDqsDLL DIMM0 Lane 8
+ BFDataByteRxDqsDLLDimm0Lane9, ///< Bit field DataByteRxDqsDLL DIMM0 Lane 9
+ BFDataByteRxDqsDLLDimm0LaneA, ///< Bit field DataByteRxDqsDLL DIMM0 Lane A
+ BFDataByteRxDqsDLLDimm0LaneB, ///< Bit field DataByteRxDqsDLL DIMM0 Lane B
+ BFDataByteRxDqsDLLDimm0LaneC, ///< Bit field DataByteRxDqsDLL DIMM0 Lane C
+ BFDataByteRxDqsDLLDimm0LaneD, ///< Bit field DataByteRxDqsDLL DIMM0 Lane D
+ BFDataByteRxDqsDLLDimm0LaneE, ///< Bit field DataByteRxDqsDLL DIMM0 Lane E
+ BFDataByteRxDqsDLLDimm0LaneF, ///< Bit field DataByteRxDqsDLL DIMM0 Lane F
+ BFDataByteRxDqsDLLDimm0Lane10, ///< Bit field DataByteRxDqsDLL DIMM0 Lane 10
+ BFDataByteRxDqsDLLDimm0Lane11, ///< Bit field DataByteRxDqsDLL DIMM0 Lane 11
+ BFDataByteRxDqsDLLDimm0Broadcast, ///< Bit field DataByteRxDqsDLL DIMM0 Broadcast
+ BFDataByteRxDqsDLLDimm1Lane0, ///< Bit field DataByteRxDqsDLL DIMM1 Lane 0
+ BFDataByteRxDqsDLLDimm1Lane1, ///< Bit field DataByteRxDqsDLL DIMM1 Lane 1
+ BFDataByteRxDqsDLLDimm1Lane2, ///< Bit field DataByteRxDqsDLL DIMM1 Lane 2
+ BFDataByteRxDqsDLLDimm1Lane3, ///< Bit field DataByteRxDqsDLL DIMM1 Lane 3
+ BFDataByteRxDqsDLLDimm1Lane4, ///< Bit field DataByteRxDqsDLL DIMM1 Lane 4
+ BFDataByteRxDqsDLLDimm1Lane5, ///< Bit field DataByteRxDqsDLL DIMM1 Lane 5
+ BFDataByteRxDqsDLLDimm1Lane6, ///< Bit field DataByteRxDqsDLL DIMM1 Lane 6
+ BFDataByteRxDqsDLLDimm1Lane7, ///< Bit field DataByteRxDqsDLL DIMM1 Lane 7
+ BFDataByteRxDqsDLLDimm1Lane8, ///< Bit field DataByteRxDqsDLL DIMM1 Lane 8
+ BFDataByteRxDqsDLLDimm1Lane9, ///< Bit field DataByteRxDqsDLL DIMM1 Lane 9
+ BFDataByteRxDqsDLLDimm1LaneA, ///< Bit field DataByteRxDqsDLL DIMM1 Lane A
+ BFDataByteRxDqsDLLDimm1LaneB, ///< Bit field DataByteRxDqsDLL DIMM1 Lane B
+ BFDataByteRxDqsDLLDimm1LaneC, ///< Bit field DataByteRxDqsDLL DIMM1 Lane C
+ BFDataByteRxDqsDLLDimm1LaneD, ///< Bit field DataByteRxDqsDLL DIMM1 Lane D
+ BFDataByteRxDqsDLLDimm1LaneE, ///< Bit field DataByteRxDqsDLL DIMM1 Lane E
+ BFDataByteRxDqsDLLDimm1LaneF, ///< Bit field DataByteRxDqsDLL DIMM1 Lane F
+ BFDataByteRxDqsDLLDimm1Lane10, ///< Bit field DataByteRxDqsDLL DIMM1 Lane 10
+ BFDataByteRxDqsDLLDimm1Lane11, ///< Bit field DataByteRxDqsDLL DIMM1 Lane 11
+ BFDataByteRxDqsDLLDimm1Broadcast, ///< Bit field DataByteRxDqsDLL DIMM1 Broadcast
+ BFDataByteRxDqsDLLDimm2Lane0, ///< Bit field DataByteRxDqsDLL DIMM2 Lane 0
+ BFDataByteRxDqsDLLDimm2Lane1, ///< Bit field DataByteRxDqsDLL DIMM2 Lane 1
+ BFDataByteRxDqsDLLDimm2Lane2, ///< Bit field DataByteRxDqsDLL DIMM2 Lane 2
+ BFDataByteRxDqsDLLDimm2Lane3, ///< Bit field DataByteRxDqsDLL DIMM2 Lane 3
+ BFDataByteRxDqsDLLDimm2Lane4, ///< Bit field DataByteRxDqsDLL DIMM2 Lane 4
+ BFDataByteRxDqsDLLDimm2Lane5, ///< Bit field DataByteRxDqsDLL DIMM2 Lane 5
+ BFDataByteRxDqsDLLDimm2Lane6, ///< Bit field DataByteRxDqsDLL DIMM2 Lane 6
+ BFDataByteRxDqsDLLDimm2Lane7, ///< Bit field DataByteRxDqsDLL DIMM2 Lane 7
+ BFDataByteRxDqsDLLDimm2Lane8, ///< Bit field DataByteRxDqsDLL DIMM2 Lane 8
+ BFDataByteRxDqsDLLDimm2Lane9, ///< Bit field DataByteRxDqsDLL DIMM2 Lane 9
+ BFDataByteRxDqsDLLDimm2LaneA, ///< Bit field DataByteRxDqsDLL DIMM2 Lane A
+ BFDataByteRxDqsDLLDimm2LaneB, ///< Bit field DataByteRxDqsDLL DIMM2 Lane B
+ BFDataByteRxDqsDLLDimm2LaneC, ///< Bit field DataByteRxDqsDLL DIMM2 Lane C
+ BFDataByteRxDqsDLLDimm2LaneD, ///< Bit field DataByteRxDqsDLL DIMM2 Lane D
+ BFDataByteRxDqsDLLDimm2LaneE, ///< Bit field DataByteRxDqsDLL DIMM2 Lane E
+ BFDataByteRxDqsDLLDimm2LaneF, ///< Bit field DataByteRxDqsDLL DIMM2 Lane F
+ BFDataByteRxDqsDLLDimm2Lane10, ///< Bit field DataByteRxDqsDLL DIMM2 Lane 10
+ BFDataByteRxDqsDLLDimm2Lane11, ///< Bit field DataByteRxDqsDLL DIMM2 Lane 11
+ BFDataByteRxDqsDLLDimm2Broadcast, ///< Bit field DataByteRxDqsDLL DIMM2 Broadcast
+ BFDataByteRxDqsDLLDimm3Lane0, ///< Bit field DataByteRxDqsDLL DIMM3 Lane 0
+ BFDataByteRxDqsDLLDimm3Lane1, ///< Bit field DataByteRxDqsDLL DIMM3 Lane 1
+ BFDataByteRxDqsDLLDimm3Lane2, ///< Bit field DataByteRxDqsDLL DIMM3 Lane 2
+ BFDataByteRxDqsDLLDimm3Lane3, ///< Bit field DataByteRxDqsDLL DIMM3 Lane 3
+ BFDataByteRxDqsDLLDimm3Lane4, ///< Bit field DataByteRxDqsDLL DIMM3 Lane 4
+ BFDataByteRxDqsDLLDimm3Lane5, ///< Bit field DataByteRxDqsDLL DIMM3 Lane 5
+ BFDataByteRxDqsDLLDimm3Lane6, ///< Bit field DataByteRxDqsDLL DIMM3 Lane 6
+ BFDataByteRxDqsDLLDimm3Lane7, ///< Bit field DataByteRxDqsDLL DIMM3 Lane 7
+ BFDataByteRxDqsDLLDimm3Lane8, ///< Bit field DataByteRxDqsDLL DIMM3 Lane 8
+ BFDataByteRxDqsDLLDimm3Lane9, ///< Bit field DataByteRxDqsDLL DIMM3 Lane 9
+ BFDataByteRxDqsDLLDimm3LaneA, ///< Bit field DataByteRxDqsDLL DIMM3 Lane A
+ BFDataByteRxDqsDLLDimm3LaneB, ///< Bit field DataByteRxDqsDLL DIMM3 Lane B
+ BFDataByteRxDqsDLLDimm3LaneC, ///< Bit field DataByteRxDqsDLL DIMM3 Lane C
+ BFDataByteRxDqsDLLDimm3LaneD, ///< Bit field DataByteRxDqsDLL DIMM3 Lane D
+ BFDataByteRxDqsDLLDimm3LaneE, ///< Bit field DataByteRxDqsDLL DIMM3 Lane E
+ BFDataByteRxDqsDLLDimm3LaneF, ///< Bit field DataByteRxDqsDLL DIMM3 Lane F
+ BFDataByteRxDqsDLLDimm3Lane10, ///< Bit field DataByteRxDqsDLL DIMM3 Lane 10
+ BFDataByteRxDqsDLLDimm3Lane11, ///< Bit field DataByteRxDqsDLL DIMM3 Lane 11
+ BFDataByteRxDqsDLLDimm3Broadcast, ///< Bit field DataByteRxDqsDLL DIMM3 Broadcast
+ BFDataByteDllPowerMgnByte0, ///< Bit field DataByteDllPowerManagement for Byte 0
+ BFDataByteDllPowerMgnByte1, ///< Bit field DataByteDllPowerManagement for Byte 1
+ BFDataByteDllPowerMgnByte2, ///< Bit field DataByteDllPowerManagement for Byte 2
+ BFDataByteDllPowerMgnByte3, ///< Bit field DataByteDllPowerManagement for Byte 3
+ BFDataByteDllPowerMgnByte4, ///< Bit field DataByteDllPowerManagement for Byte 4
+ BFDataByteDllPowerMgnByte5, ///< Bit field DataByteDllPowerManagement for Byte 5
+ BFDataByteDllPowerMgnByte6, ///< Bit field DataByteDllPowerManagement for Byte 6
+ BFDataByteDllPowerMgnByte7, ///< Bit field DataByteDllPowerManagement for Byte 7
+ BFDataByteDllPowerMgnByte8, ///< Bit field DataByteDllPowerManagement for Byte ECC
+ BFDataByteDllPowerMgnByteAll, ///< Bit field DataByteDllPowerManagement for all bytes
+ BFIoSkewMode, ///< Bit field for IoSkewMode
+ BFLfsrRollOver, ///< Bit field for LfsrRollOver
+ BFM1MemClkFreq, ///< Bit field M1MemClkFreq
+ BFRate, ///< Bit field Rate
+ BFFence2, ///< Bit field Fence2
+ BFReducedLoop, ///< Bit field ReducedLoop
+
+ BFNbVid0, ///< Bit field NbVid for NB Pstate 0
+ BFNbVid0Hi, ///< Bit field 7th bit of NbVid for NB Pstate 0
+ BFNbVid1, ///< Bit field NbVid for NB Pstate 1
+ BFNbVid1Hi, ///< Bit field 7th bit of NbVid for NB Pstate 1
+ BFNbVid2, ///< Bit field NbVid for NB Pstate 2
+ BFNbVid2Hi, ///< Bit field 7th bit of NbVid for NB Pstate 2
+ BFNbVid3, ///< Bit field NbVid for NB Pstate 3
+ BFNbVid3Hi, ///< Bit field 7th bit of NbVid for NB Pstate 3
+
+ BFMemPstate0, ///< Bit field MemPstate for NB Pstate 0
+ BFMemPstate1, ///< Bit field MemPstate for NB Pstate 1
+ BFMemPstate2, ///< Bit field MemPstate for NB Pstate 2
+ BFMemPstate3, ///< Bit field MemPstate for NB Pstate 3
+ BFMemPstateDis, ///< Bit field MemPstateDis
+ BFMultiNodeCpu, ///< Bit field for MultiNodeCpu( MCM capability)
+
+ BFRxBypass3rd4thStg, ///< Bit field RxBypass3rd4thStg
+ BFRx4thStgEn, ///< Bit field Rx4thStgEn
+ BFDllCSRBiasTrim, ///< Bit feild DllCSRBiasTrim
+ BFRxDqInsDly, ///< Bit feild RxDqInsDly
+ BFDllNoLock, ///< Bit field DllNoLock
+ BFEnSplitDctLimits, ///< Bit field EnSplitDctLimits
+ BFEnSplitMctDatBuffers, ///< Bit field EnSplitMctDatBuffers
+ BFGmcTokenLimit, ///< Bit fieid GmcTokenLimit
+ BFMctTokenLimit, ///< Bit field MctTokenLimit
+ BFGmcToDctControl1, ///< Bit field GmcToDctControl1
+ BFDllCSRBisaTrimDByte, ///< Bit field DllCSRBisaTrimDByte
+ BFDllCSRBisaTrimClk, ///< Bit field DllCSRBisaTrimClk
+ BFDllCSRBisaTrimCsOdt, ///< Bit field DllCSRBisaTrimCsOdt
+ BFDllCSRBisaTrimAByte2, ///< Bit field DllCSRBisaTrimAByte2
+ BFReduceLoop, ///< Bit field ReduceLoop
+ BFEffArbDis, ///< Bit field EffArbDis
+ BFDramCommand0, ///< Bit field for DramCommand0 register
+ BFDramCommand2, ///< Bit field for DramCommand2 register
+ BFDramLoopbackAndTrainingControl, ///< Bit field for DramLoopbackAndTrainingControl register
+ BFCurMemPstate, ///< Bit field CurMemPstate
+
+ BFMxMr0, ///< Bit field for MxMr0
+ BFMxMr1, ///< Bit field for MxMr1
+ BFMxMr2, ///< Bit field for MxMr2
+ BFMxMrsEn, ///< Bit field for MxMrsEn
+
+ BFUrgentTknDis, ///< Bit field for "UrgentTknDis"
+ BFUrGmcMinTokens, ///< Bit field for "UrGmcMinTokens"
+ BFUrGmcTokenLimit, ///< Bit field for "UrGmcTokenLimit"
+ BFUrMctTokenLimit, ///< Bit field for "UrMctTokenLimit"
+ BFUrMctMinTokens, ///< Bit field for "UrMctMinTokens"
+
+ BFChAM1FenceSave, ///< Bit field for "ChAM1FenceSave"
+ BFChBM1FenceSave, ///< Bit field for "ChBM1FenceSave"
+
+ BFMctEccDisLatOptEn, ///< Bit field for "MctEccDisLatOptEn"
+ BFCpuElevPrioDis, ///< Bit field for "CpuElevPrioDis"
+ BFNbOffsetTrim, ///< Bit field for "NbOffsetTrim"
+ BFECCExclusionBaseLow, ///< Bit field for ECCExclusionBaseLow
+ BFECCExclusionBaseHigh, ///< Bit field for ECCExclusionBaseHigh
+ BFECCExclusionLimitLow, ///< Bit field for ECCExclusionLimitLow
+ BFECCExclusionLimitHigh, ///< Bit field for ECCExclusionLimitHigh
+ BFCpuElevPrioPeriod, ///< Bit field for CpuElevPrioPeriod
+ BFSbRdPtrInit, ///< Bit field for SbRdPtrInit
+ BFCmdRdPtrInit, ///< Bit field for CmdRdPtrInit
+
+ BFChannelEn, ///< Bit field ChannelEn
+ BFDctEn, ///< Bit field DctEn
+ BFDramType, ///< Bit field DramType
+ BFPmuReset, ///< Bit field PmuReset
+ BFPmuStall, ///< Bit field PmuStall
+ BFMemResetL, ///< Bit field MemReset_L
+ BFAcsmCkeOride, ///< Bit field AcsmCkeOride
+ BFAcsmCkeEnb, ///< Bit field AcsmCkeEnb
+ BFDbiOnResetDrvEn, ///< Bit field DbiOnResetDrvEn
+ BFDbiOnResetVal, ///< Bit field DbiOnResetVal
+
+ BFGnbVidReqDis, ///< Bit field GndVidReqDis
+ BFNbVidUseGnb, ///< Bit field NbVidUseGnb
+ BFVidChgBusy, ///< Bit field VidChgBusy
+
+ BFTrrdlG5, ///< Bit field Trrdl for GDDR5
+ BFTrrdsG5, ///< Bit field Trrds for GDDR5
+ BFTrcG5, ///< Bit field Trc for GDDR5
+ BFTrcdWrG5, ///< Bit field TrcdWr for GDDR5
+ BFTrcdRdG5, ///< Bit field TrcdRd for GDDR5
+ BFTrasG5, ///< Bit field Tras for GDDR5
+ BFTrtplG5, ///< Bit field Trtpl for GDDR5
+ BFTrtpsG5, ///< Bit field Trtps for GDDR5
+ BFTwrG5, ///< Bit field Twr for GDDR5
+ BFTrpG5, ///< Bit field Trp for GDDR5
+ BFT32awG5, ///< Bit field T32aw for GDDR5
+ BFTppdG5, ///< Bit field Tppd for GDDR5
+ BFTfawG5, ///< Bit field Tfaw for GDDR5
+ BFTrwtTOG5, ///< Bit field TrwtTO for GDDR5
+ BFTccdlG5, ///< Bit field Tccdl for GDDR5
+ BFTccdsG5, ///< Bit field Tccds for GDDR5
+ BFTwtrlG5, ///< Bit field Twtrl for GDDR5
+ BFTwtrsG5, ///< Bit field Twtrs for GDDR5
+ BFTcrcwlG5, ///< Bit field Tcrcwl for GDDR5
+ BFTwlG5, ///< Bit field Twl for GDDR5
+ BFTcrcrlG5, ///< Bit field Tcrcrl for GDDR5
+ BFTclG5, ///< Bit field Tcl for GDDR5
+ BFTrfcG5, ///< Bit field Trfc for GDDR5
+ BFTrefG5, ///< Bit field Tref for GDDR5
+ BFMemClkFreqValG5, ///< Bit field MemClkFreqVal for GDDR5
+ BFMemClkFreqG5, ///< Bit field MemClkFreq for GDDR5
+ BFTmrdG5, ///< Bit field Tmrd for GDDR5
+ BFTcksrxG5, ///< Bit field Tcksrx for GDDR5
+ BFTcksreG5, ///< Bit field Tcksre for GDDR5
+ BFTckeG5, ///< Bit field Tcke for GDDR5
+ BFTpdG5, ///< Bit field Tpd for GDDR5
+ BFAggrPDDelayG5, ///< Bit field AggrPDDelay for GDDR5
+ BFPchgPDEnDelayG5, ///< Bit field PchgPDEnDelay for GDDR5
+ BFTxpnG5, ///< Bit field Txpn
+
+ BFBankGrpEn, ///< Bit field BankGrpEn for GDDR5
+ BFPptInterval, ///< Bit field PptInterval for GDDR5
+ BFPptEn, ///< Bit field PptEn for GDDR5
+ BFStartWCK, ///< Bit field StartWCK for GDDR5
+ BFWrCrcEn, ///< Bit field WrCrcEn
+ BFRdCrcEn, ///< Bit field RdCrcEn
+ BFWDBIDis, ///< Bit field WDBIDis for GDDR5
+ BFRDBIDis, ///< Bit field RDBIDis for GDDR5
+ BFABILowLimit, ///< Bit field ABILowLimit for GDDR5
+ BFABIDis, ///< Bit field ABIDis for GDDR5
+ BFDataScrambleEn, ///< Bit field DataScrambleEn for GDDR5
+ BFRdEdcLatency, ///< Bit field RdEdcLatency for GDDR5
+ BFWrEdcLatency, ///< Bit field WrEdcLatency for GDDR5
+
+ BFTclAdj, ///< Bit field TclAdj
+ BFPhyTclAdj, ///< Bit field PhyTclAdj
+ BFPhyDisable, ///< Bit field PhyDisable
+ BFG5Mode, ///< Bit field G5_Mode
+ BFG5ModeAbyte, ///< Bit field G5_Mode ABYTE
+ BFG5ModeDbyte, ///< Bit field G5_Mode DBYTE
+ BFG5ModeAbit, ///< Bit field G5_Mode ABIT
+ BFCalG5D3, ///< Bit field CalG5D3
+ BFCalCmptrResTrim, ///< Bit field CalCmptrResTrim
+ BFDsRdy, ///< Bit field Rdy for downstream mailbox
+ BFDsMessage, ///< Bit field Message for downstream mailbox
+ BFUsRdy, ///< Bit field UsRdy for upstream mailbox
+ BFUsMessage, ///< Bit field Message for upstream mailbox
+ BFRdy, ///< Bit field Rdy for upstream mailbox
+ BFUs2Rdy, ///< Bit field UsRdy for upstream mailbox 2
+ BFUs2Message, ///< Bit field Message for upstream mailbox 2
+ BFRdy2, ///< Bit field Rdy for upstream mailbox 2
+ BFPMUClkDiv, ///< Bit field PMUClkDiv
+ BFDisPredriverCal, ///< Bit field DisPredriverCal
+ BFPhyClkCtl, ///< Bit field PhyClkCtl
+
+ // Reserved
+ BFReserved01, ///< Reserved 01
+ BFReserved02, ///< Reserved 02
+ BFReserved03, ///< Reserved 03
+ BFReserved04, ///< Reserved 04
+ BFReserved05, ///< Reserved 05
+ BFReserved06, ///< Reserved 06
+ BFReserved07, ///< Reserved 07
+ BFReserved08, ///< Reserved 08
+ BFReserved09, ///< Reserved 09
+ BFReserved10, ///< Reserved 10
+
+ BFReserved11, ///< Reserved 11
+ BFReserved12, ///< Reserved 12
+ BFReserved13, ///< Reserved 13
+ BFReserved14, ///< Reserved 14
+ BFReserved15, ///< Reserved 15
+ BFReserved16, ///< Reserved 16
+ BFReserved17, ///< Reserved 17
+ BFReserved18, ///< Reserved 18
+ BFReserved19, ///< Reserved 19
+ BFReserved20, ///< Reserved 20
+ BFIdsCmnMemReg, ///< Reserved for ids only, the value may dynamic change
+ BFDctSelBaseAddrReg, ///< Bit field DctSelBaseAddrReg
+ BFDctSelBaseOffsetReg, ///< Bit field DctSelBaseOffsetReg
+ BFPDPhyPSDis, ///< Bit field PDPhyPSDis F2xA8[19]
+
+ /* End of accessible list --- entries below this line are for private use ------------*/
+ BFEndOfList, ///< End of bit field list
+
+ // Only for Table Drive Support define.
+ BFRcvEnDly, ///< F2x[1,0]9C_x[2B:10] Dram DQS Receiver Enable Timing Control Registers
+ BFWrDatDly, ///< F2x[1, 0]9C_x[302:301, 202:201, 102:101, 02:01] DRAM Write Data Timing [High:Low] Registers
+ BFRdDqsDly, ///< F2x[1, 0]9C_x[306:305, 206:205, 106:105, 06:05] DRAM Read DQS Timing Control [High:Low] Registers
+ BFWrDqsDly, ///< F2x[1, 0]9C_x[4A:30] DRAM DQS Write Timing Control Registers
+ BFPhRecDly, ///< F2x[1, 0]9C_x[51:50] DRAM Phase Recovery Control Register [High:Low] Registers
+ BFRdDqs2dDly, ///< F2x[1, 0]9C_x0D0F_0[F,8:0]2[3:0]
+ /* Do not define any entries beyond this point */
+ BFAbsLimit ///< Beyond this point is reserved for bit field manipulation
+
+} BIT_FIELD_NAME;
+
+/// Bit field aliases
+#define BFMainPllOpFreqId BFNbFid
+#define BFNbDid BFNbPs0NclkDiv
+#define BFRdDramTrainMode BFPrefDramTrainMode
+#define BFThrottleEn BFCmdThrottleMode
+#define BFIntlvRegionEn BFIntLvRgnSwapEn
+#define BFIntlvRegionBase BFIntLvRgnBaseAddr
+#define BFIntlvRegionLimit BFIntLvRgnLmtAddr
+#define BFRdOdtPatReg BFPhyRODTCSLow
+#define BFWrOdtPatReg BFPhyWODTCSLow
+#define BFLockDramCfg BFC6DramLock
+#define BFRstRcvFifo BFTwr
+#define BFDramCmd2Reg BFCmdBank
+#define BFDramODTCtlReg BFRdOdtTrnOnDly
+#define BFDctSelBankSwap BFBankSwapAddr8En
+
+/// Bit field names per DRAM CS base address register
+typedef enum {
+ BFCSEnable = 0, ///< Chip select enable
+ BFSpare = 1, ///< Spare rank
+ BFTestFail = 2, ///< Memory test failed
+ BFOnDimmMirror = 3 ///< on-DIMM mirroring enable
+} CS_BASE_BIT_FIELD;
+
+/// Flag for exclude dimm
+typedef enum {
+ NORMAL, ///< Normal mode, exclude the dimm if there is new dimm failure
+ TRAINING, ///< Training mode, exclude dimms that fail during training after training is done
+ END_TRAINING ///< End training mode, exclude all dimms that failed during training
+} DIMM_EXCLUDE_FLAG;
+
+#define BSP_DIE 0
+#define MAX_NODES_SUPPORTED 8 ///< Maximum number of nodes in the system.
+#define MAX_CS_PER_CHANNEL 8 ///< Max CS per channel
+#define MAX_BYTELANES 8 ///< 8 byte lanes
+#define MAX_DELAYS 9 ///< 8 data bytes + 1 ECC byte
+#define MAX_DIMMS 4 ///< 4 DIMMs per channel
+
+#define VDDIO_DETERMINED 0xFF ///< VDDIO has been determined yet. Further processing is not needed.
+
+/// Indicators for voltage stages
+typedef enum {
+ VOLT_NORMAL_STAGE = 0, ///< Indicate normal voltage stage
+ VOLT_AMP_STAGE ///< Indicate AMP voltage stage
+} VOLT_STAGE;
+
+///
+/// MEM_SHARED_DATA
+/// This structure defines the shared data area that is used by the memory
+/// code to share data between different northbridge objects. Each substructure
+/// in the data area defines how this data area is used by a different purpose.
+///
+/// There should only be one instance of this struct created for all of the memory
+/// code to use.
+///
+typedef struct _MEM_SHARED_DATA {
+
+ // System memory map data
+ UINT32 CurrentNodeSysBase; ///< Base[47:16] (system address) DRAM base address for current node.
+ /// Memory map data for each node
+ BOOLEAN AllECC; ///< ECC support on the system
+ DIMM_EXCLUDE_FLAG DimmExcludeFlag; ///< Control the exclude dimm behavior
+ UINT8 VoltageMap; ///< The commonly supported voltage map in the system
+
+ UINT8 TopNode; ///< Node that has its memory mapped to TOPMEM/TOPMEM2
+ BOOLEAN C6Enabled; ///< TRUE if C6 is enabled
+ BOOLEAN AcpEngineEnabled; ///< TRUE if ACP Engine is enabled
+
+ /// Data structure for NB register table
+ struct {
+ UINT64 FamilyId; ///< LogicalCpuid.Family
+ UINT32 *NBRegTable; ///< Pointer to allocated buffer for NBRegTable
+ } NBRegMap[MAX_NODES_SUPPORTED];
+
+ /// Data structure for node map
+ struct {
+ BOOLEAN IsValid; ///< TRUE if this node contains memory.
+ UINT32 SysBase; ///< Base[47:16] (system address) DRAM base address of this node.
+ UINT32 SysLimit; ///< Base[47:16] (system address) DRAM limit address of this node.
+ } NodeMap[MAX_NODES_SUPPORTED];
+ BOOLEAN UndoHoistingAbove1TB; ///< Undo hoisting above 1TB
+
+ /// Data structure for node interleave feature
+ struct {
+ BOOLEAN IsValid; ///< TRUE if the data in this structure is valid.
+ UINT8 NodeCnt; ///< Number of nodes in the system.
+ UINT32 NodeMemSize; ///< Total memory of this node.
+ UINT32 Dct0MemSize; ///< Total memory of this DCT 0.
+ UINT8 NodeIntlvSel; ///< Index to each node.
+ } NodeIntlv;
+
+ /// Common Voltage Min/Max Values
+ UINT8 CommonSmallestMaxNegVref; ///< Common smallest negative Vref across platfrom
+ UINT8 CommonSmallestMaxPosVref; ///< Common smallest positive Vref across platform
+
+} MEM_SHARED_DATA;
+
+///
+/// MEM_MAIN_DATA_BLOCK
+///
+typedef struct _MEM_MAIN_DATA_BLOCK {
+ struct _MEM_DATA_STRUCT *MemPtr; ///< Pointer to customer shared data
+ struct _MEM_NB_BLOCK *NBPtr; ///< Pointer to array of NB Blocks
+ struct _MEM_TECH_BLOCK *TechPtr; ///< Pointer to array of Tech Blocks
+ struct _MEM_SHARED_DATA *mmSharedPtr; ///< Pointer to shared data area.
+ UINT8 DieCount; ///< Total number of Dies installed
+} MEM_MAIN_DATA_BLOCK;
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/*
+node: Indicates the Node
+- Value ranges from 0-7, 0xF: for all nodes
+- Size - 4 Bits
+
+dct: Indicate the DRAM Controller
+- Value is 0, 1 (0xF: apply setting to all DCTs)
+- Size - 4 Bits
+
+dimm: This values specifies which DIMM register will be applied
+- The value varies from 0 to 3, 0xF: all DIMMs
+- Size - 4 Bits
+
+attr - Indicates if the value needs to be added, subtracted, overridden or Auto (not changed)
+- 0: Do not change the current value in the register
+- 1: Use the value provided in the table to override the current value in the register (the one that AGESA initially determined)
+- 2: Add the value provided in the table as an offset to the current value in the register (the one that AGESA initially determined)
+- 3: Subtract the value provided in the table as an offset to the current value in the register (the one that AGESA initially determined)
+- Size - 2 Bits
+
+time - Indicate the timing for the register which is written.
+- 0: Write register value before Dram init
+- 1: Write register value before memory training
+- 2: Write register value after memory training
+- Size - 1 Bits
+
+bytelane: bytelane number
+- This determines specifies which bytelane register will be applied
+- Bit0 =1 - set value into Bytelane0
+- Bit1 =1 - set value into Bytelane1
+- Bit2 =1 - set value into Bytelane2
+...
+...
+- 0xFFFF: all bytelane
+- Size - 16 Bits.
+
+bfIndex: Indicate the bitfield index
+- Size - 16 Bits
+
+value - Value to be used
+- This can be an offset (sub or Add) or an override value.
+- Size - DWORD
+*/
+
+// Sample code
+// NBACCESS (MTBeforeDInit, MTNodes, MTDct0, BFCSBaseAddr5Reg, MTOverride, 0x400001),
+// NBACCESS (MTBeforeTrn, MTNodes, MTDct1, BFCSBaseAddr7Reg, MTOverride, 0xFFFFFFFF),
+// DQSACCESS (MTAfterTrn, MTNodes, MTDcts, MTDIMM0, MTBL1+MTBL2, BFRcvEnDly, MTSubtract, 2),
+// DQSACCESS (MTAfterTrn, MTNodes, MTDct1, MTDIMM1, MTBLNOECC, BFRcvEnDly, MTAdd, 1),
+
+#define ENDMEMTDS 0, 0, 0, 0, 0, 0, 0xFFFFFFFFul, 0
+
+#define NBACCESS(time, node, dct, bitfield, attr, value) \
+{ (time), \
+ ((node) & 0x0F) | ((dct) << 4), \
+ (((attr) & 0x07) << 4) | (VT_MSK_VALUE << 7) , \
+ (UINT8)((bitfield) & 0x000000FF), \
+ (UINT8)(((bitfield) >> 8) & 0x000000FF), \
+ (UINT8)(((bitfield) >> 16) & 0x000000FF), \
+ (UINT8)(((bitfield) >> 24) & 0x000000FF), \
+ 0, 0, \
+ (UINT8)((value) & 0x000000FF), \
+ (UINT8)(((value) >> 8) & 0x000000FF), \
+ (UINT8)(((value) >> 16) & 0x000000FF), \
+ (UINT8)(((value) >> 24) & 0x000000FF), \
+ 0, 0, 0 \
+}
+
+#define DQSACCESS(time, node, dct, dimm, bitfield, attr, b0, b1, b2, b3, b4, b5, b6, b7, b8) \
+{ (time), \
+ ((node) & 0x0F) | ((dct) << 4), \
+ (((dimm) & 0x0F) | ((attr) & 0x07) << 4) | (VT_ARRAY << 7) , \
+ (UINT8)((bitfield) & 0x000000FF), \
+ (UINT8)(((bitfield) >> 8) & 0x000000FF), \
+ (UINT8)(((bitfield) >> 16) & 0x000000FF), \
+ (UINT8)(((bitfield) >> 24) & 0x000000FF), \
+ (b0), (b1), (b2), (b3), (b4), (b5), (b6), (b7), (b8) \
+}
+
+#define DQS2DACCESS(time, node, dct, dimm, bitfield, attr, l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18) \
+{ (time), \
+ ((node) & 0x0F) | ((dct) << 4), \
+ (((dimm) & 0x0F) | ((attr) & 0x07) << 4) | (VT_ARRAY << 7) , \
+ (UINT8)((bitfield) & 0x000000FF), \
+ (UINT8)(((bitfield) >> 8) & 0x000000FF), \
+ (UINT8)(((bitfield) >> 16) & 0x000000FF), \
+ (UINT8)(((bitfield) >> 24) & 0x000000FF), \
+ (l0, (l1), (l2), (l3), (l4), (l5), (l6), (l7), (l8), (l9), (l10), (l11), (l12), (l13), (l14), (l15), (l16), (l17), (l18) \
+}
+/// Type of modification supported by table driven support.
+typedef enum {
+ MTAuto, ///< Do not change the current value in the register
+ MTOverride, ///< Use the value provided in the table to override the current value in the register
+ MTSubtract, ///< Subtract the value provided in the table as an offset to the current value in the register
+ MTAdd, ///< Add the value provided in the table as an offset to the current value in the reg
+ MTAnd, ///< And the value provided in the table as an offset to the current value in the reg
+ MTOr ///< Or the value provided in the table as an offset to the current value in the reg
+} MTAttr;
+
+/// Time for table driven support to make modification.
+/// NOTE please keep the order of below MT points
+typedef enum {
+ MTBeforeInitializeMCT = 0, ///< 00 Before InitializeMCT
+ MTAfterAutoCycTiming, ///< 01 After Auto Cycle Timing
+ MTAfterPlatformSpec, ///< 02 After Platform Specific Configuration
+ MTBeforeDInit, ///< 03 Before Dram init
+ MTBeforeTrn, ///< 04 Before memory training
+ MTAfterMemPstate1PartialTrn, ///< 05 After partial training at starting frequency
+ MTAfterTrn, ///< 06 After memory training
+ MTAfterSwWLTrn, ///< 07 After SW Based WL Training
+ MTAfterHwWLTrnP1, ///< 08 After HW Based WL Training Part 1
+ MTAfterHwRxEnTrnP1, ///< 09 After HW Based Receiver Enable Training Part 1
+ MTAfterFreqChg, ///< 10 After each frequency change
+ MTAfterHwWLTrnP2, ///< 11 After HW Based WL Training Part 2
+ MTAfterHwRxEnTrnP2, ///< 12 After HW Based Receiver Enable Training Part 2
+ MTAfterSwRxEnTrn, ///< 13 After SW Based Receiver Enable Training
+ MTAfterDqsRwPosTrn, ///< 14 After DQS Read/Write Position Training
+ MTAfterMaxRdLatTrn, ///< 15 After Max Read Latency Training
+ MTAfterNbPstateChange, ///< 16 After programming NB Pstate dependent registers
+ MTAfterInterleave, ///< 17 After Programming Interleave registers
+ MTAfterSettingMemoryPstate1, ///< 18 After programming registers for memory pstate 1
+ MTAfterFinalizeMCT, ///< 19 After Finalize MCT Programming
+
+ MTValidTimePointLimit, ///< Mark the upper bound of the supported time points
+ MTEnd = 0xFF ///< End of enum define.
+} MTTime;
+
+/// Node on which modification should be made by table driven support.
+typedef enum {
+ MTNode0, ///< Node 0.
+ MTNode1, ///< Node 1.
+ MTNode2, ///< Node 2.
+ MTNode3, ///< Node 3.
+ MTNode4, ///< Node 4.
+ MTNode5, ///< Node 5.
+ MTNode6, ///< Node 6.
+ MTNode7, ///< Node 7.
+ MTNodes = 0xF ///< all nodes
+} MTNode;
+
+/// DCT on which modification should be made by table driven support.
+typedef enum {
+ MTDct0, ///< DCT 0.
+ MTDct1, ///< DCT 1.
+ MTDcts = 0x7, ///< all dcts
+} MTDct;
+
+/// Dimm on which modification should be made by table driven support.
+typedef enum {
+ MTDIMM0, ///< Dimm 0.
+ MTDIMM1, ///< Dimm 1.
+ MTDIMM2, ///< Dimm 2.
+ MTDIMM3, ///< Dimm 3.
+ MTDIMMs = 0xF, ///< all Dimms
+} MTDIMM;
+
+/// Bytelane on which modification should be made by table driven support.
+typedef enum {
+ MTBL0 = 0x1, ///< set the value into Bytelane0
+ MTBL1 = 0x2, ///< set the value into Bytelane1
+ MTBL2 = 0x4, ///< set the value into Bytelane2
+ MTBL3 = 0x8, ///< set the value into Bytelane3
+ MTBL4 = 0x10, ///< set the value into Bytelane4
+ MTBL5 = 0x20, ///< set the value into Bytelane5
+ MTBL6 = 0x40, ///< set the value into Bytelane6
+ MTBL7 = 0x80, ///< set the value into Bytelane7
+ MTBL8 = 0x100, ///< set the value into ECC
+ MTBLNOECC = 0xFF, ///< all Bytelanes except ECC
+ MTBLs = 0xFFFF, ///< all Bytelanes
+} MTBL;
+
+/// Values used to indicate which type of training is being done.
+typedef enum {
+ TRN_RCVR_ENABLE, ///< Reciever Enable Training
+ TRN_DQS_POSITION, ///< Read/Write DQS Position training
+ TRN_MAX_READ_LATENCY ///< Max read Latency training
+} TRAINING_TYPE;
+
+/// Memory Pstate
+typedef enum {
+ MEMORY_PSTATE0, ///< Memory Pstate 0
+ MEMORY_PSTATE1, ///< Memory Pstate 1
+} MEM_PSTATE;
+
+/// Memory Pstate Training Stage
+typedef enum {
+ MEMORY_PSTATE_1ST_STAGE = 0xF1, ///< Memory Pstate processing stage 1, in which full training is done at DDR667
+ MEMORY_PSTATE_2ND_STAGE, ///< Memory Pstate processing stage 2, in which partial trainig will be done at DDR800 - target speed
+ MEMORY_PSTATE_3RD_STAGE, ///< Memory Pstate processing stage 3, in which full training will be done at target frequency and MaxRdLatency training will start
+ MEMORY_PSTATE_S3_STAGE ///< Memory Pstate Processing in S3.
+} MEM_PSTATE_STAGE;
+
+/// RdDqsDly Retrain status
+typedef enum {
+ RDDQSDLY_RTN_NEEDED = 0xF1, ///< RdDqsDly retrain may be needed
+ RDDQSDLY_RTN_SUSPEND, ///< RdDqsDly retrain is suspected
+ RDDQSDLY_RTN_ONGOING ///< RdDqsDly retrain condition is just detected
+} RDDQSDLY_RTN_STAT;
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+AGESA_STATUS
+MemAmdFinalize (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+AGESA_STATUS
+MemSocketScan (
+ IN OUT MEM_MAIN_DATA_BLOCK *mmPtr
+ );
+
+VOID
+SetMemError (
+ IN AGESA_STATUS Errorval,
+ IN OUT DIE_STRUCT *MCTPtr
+ );
+
+VOID
+AmdMemInitDataStructDefRecovery (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+VOID
+SetMemRecError (
+ IN AGESA_STATUS Errorval,
+ IN OUT DIE_STRUCT *MCTPtr
+ );
+
+AGESA_STATUS
+memDefRetSuccess ( VOID );
+
+VOID
+AmdMemFunctionListDef (
+ IN OUT VOID *pMemData
+ );
+
+VOID
+MemMDisableScrubber (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+
+VOID
+MemMRestoreScrubber (
+ IN OUT MEM_MAIN_DATA_BLOCK *MemMainPtr
+ );
+#endif /* _MM_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mn.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mn.h
new file mode 100644
index 0000000..4783cd3
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mn.h
@@ -0,0 +1,1579 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mn.h
+ *
+ * Common Northbridge
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 87494 $ @e \$Date: 2013-02-04 12:06:47 -0600 (Mon, 04 Feb 2013) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MN_H_
+#define _MN_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define _32MB_RJ16 0x0200
+#define _16MB_RJ16 0x0100
+#define _4GB_RJ16 (((UINT32) 4) << (30 - 16))
+#define _1TB_RJ16 (((UINT32) 1) << (40 - 16))
+#define HT_REGION_BASE_RJ16 ((UINT32)0x00FD0000ul)
+
+#define DCT_ACCESS_WRITE (UINT32) 0x40000000ul
+#define MTRR_VALID 11
+#define THERMAL_OPT 31
+
+#define NB_ACCESS 0
+#define DCT_PHY_ACCESS 1
+#define DCT_EXTRA 2
+
+#define DCT_PHY_DIRECT 0xF1
+
+#define VT_MSK_VALUE 0
+#define VT_ARRAY 1
+/*---------------------------------------------
+ * TSEFO - Type Start End Function Offset
+ *
+ * 31:30 Type of access (2-bits)
+ * 29:29 Special (1-bit)
+ * 28:28 Phy Direct (1-bit)
+ * 27:27 Whole Register Access (1-bit)
+ * 26:26 Linked (1-bit)
+ * 25:21 Start bit (5-bits)
+ * 20:16 End bit (5-bits)
+ * 15:00 Function_Offset/Index (16-bits)
+ *---------------------------------------------
+ */
+typedef UINT32 TSEFO;
+
+/**
+ MAKE_TSEFO(TableName, a, b, c, d, BitFieldIndex):
+
+ @param[in] TableName
+ @param[in] BitFieldIndex
+ @param[in] a Type of access.
+ @param[in] b Index of register (can be in Function_Offset format).
+ @param[in] c Highest bit of the bit field.
+ @param[in] d Lowest bit of the bit field.
+
+ @return TSEFO Access params encrypted in TSEFO format.
+--*/
+#define MAKE_TSEFO(TableName, a, b, c, d, BitFieldIndex) \
+TableName[BitFieldIndex] = ( \
+ (a == DCT_PHY_DIRECT) ? ( \
+ (((UINT32) DCT_PHY_ACCESS) << 30) | (((UINT32) 1) << 28) | (((UINT32) b) & 0xFFFF) | (\
+ ((c == 15) && (d == 0)) ? ( \
+ (((UINT32) 1) << 27) | (((UINT32) b) & 0xF0000) \
+ ) : ( \
+ (c >= d) ? ( \
+ (((UINT32) c) << 21) | (((UINT32) d) << 16) \
+ ) : ( \
+ (((UINT32) d) << 21) | (((UINT32) c) << 16) \
+ ) \
+ ) \
+ ) \
+ ) : ( \
+ (((UINT32) a) << 30) | (((UINT32) b) & 0xFFFFFFF) | ( \
+ (((UINT32) b) >> 16) ? ( \
+ (((UINT32) 1) << 29) \
+ ) : ( \
+ (c >= d) ? ( \
+ (((UINT32) c) << 21) | (((UINT32) d) << 16) \
+ ) : ( \
+ (((UINT32) d) << 21) | (((UINT32) c) << 16) \
+ ) \
+ ) \
+ ) \
+ ) \
+)
+
+/**
+ LINK_TSEFO(TableName, LowerBitFieldIndex, HigherBitFieldIndex):
+ This is one way link: any write to LowerBitFieldIndex would write to HigherBitFieldIndex,
+ but NOT the other way around.
+ Requirement: LowerBitFieldIndex must be declared *right* before HigherBitFieldIndex.
+
+ @param[in] TableName
+ @param[in] LowerBitFieldIndex
+ @param[in] HigherBitFieldIndex
+
+ @return TSEFO Access params encrypted in TSEFO format.
+--*/
+#define LINK_TSEFO(TableName, LowerBitFieldIndex, HigherBitFieldIndex) { \
+ ASSERT (LowerBitFieldIndex == (HigherBitFieldIndex - 1)) ; \
+ TableName[LowerBitFieldIndex] = TableName[LowerBitFieldIndex] | (((UINT32) 1) << 26); \
+}
+
+// Indicate when a bitfield has multiple memory Pstate copy
+#define MULTI_MPSTATE_COPY_TSEFO(TableName, BitFieldName) \
+ TableName[BitFieldName] = TableName[BitFieldName] | (((UINT32) 1) << 29)
+
+#define TSEFO_TYPE(x) ((UINT8) (((UINT32) (x) >> 30) & 0x03))
+#define TSEFO_START(x) ((UINT8) (((UINT32) (x) >> 21) & 0x1F))
+#define TSEFO_END(x) ((UINT8) (((UINT32) (x) >> 16) & 0x1F))
+#define TSEFO_OFFSET(x) ((UINT32) (x) & 0xFFFF)
+#define TSEFO_LINKED(x) ((UINT8) (((UINT32) (x) >> 26) & 0x01))
+#define TSEFO_DIRECT_EN(x) ((UINT8) (((UINT32) (x) >> 28) & 0x01))
+#define TSEFO_WHOLE_REG_ACCESS(x) ((UINT8) (((UINT32) (x) >> 27) & 0x01))
+#define _FN(x, y) (((UINT32) (x) << 12) + (UINT32) (y))
+#define TSEFO_MULTI_MPSTATE_COPY(x) ((UINT8) (((UINT32) (x) >> 29) & 1))
+#define _NOT_USED_ 0
+
+/* */
+#define B0_DLY 0
+#define B1_DLY 1
+#define B2_DLY 2
+#define B3_DLY 3
+#define B4_DLY 4
+#define B5_DLY 5
+#define B6_DLY 6
+#define B7_DLY 7
+#define ECC_DLY 8
+
+#define DDR2_TRAIN_FLOW 0
+#define DDR3_TRAIN_FLOW 1
+
+//
+// Minimum Data Eye width in consecutive 32nds of a UI of
+// valid data
+//
+#define MIN_RD_DATAEYE_WIDTH_NB 4
+#define MIN_WR_DATAEYE_WIDTH_NB 4
+
+//
+// RELIABLE READ/WRITE MODE DEFINITIONS
+//
+#define PRECHARGE_ALL_BANKS 0xFF ///< Use to specify PrechargeAll Command to Precharge Cmd Function
+#define CMD_TGT_A 0x00 ///< Issue Commands to Command Target A
+#define CMD_TGT_AB 0x01 ///< Issue Commands to Command Targets A and B
+#define CMD_TYPE_READ 0x00 ///< Read Command
+#define CMD_TYPE_WRITE 0x01 ///< Write Command
+#define CMD_TYPE_WR_RD 0x02 ///< Alternating Write and Read Commands
+#define CPG_BANK_ADDRESS_A 0x0 ///< Dimm Bank address used in Reliable RD/RW mode training
+#define CPG_BANK_ADDRESS_B 0x1 ///< Dimm Bank address used in Reliable RD/RW mode training
+#define CPG_ROW_ADDRESS_A 0x0 ///< Dimm Row address used in Reliable RD/RW mode training
+#define CPG_ROW_ADDRESS_B 0x0 ///< Dimm Row address used in Reliable RD/RW mode training
+#define CPG_COL_ADDRESS_A 0x0 ///< Dimm Column address used in Reliable RD/RW mode training
+#define CPG_COL_ADDRESS_B 0x0 ///< Dimm Column address used in Reliable RD/RW mode training
+#define CPG_COMPARE_MASK_LOW 0x00000000ul ///< Dram DQMask[31:0] used to mask comparison on reads. 1=ignore
+#define CPG_COMPARE_MASK_HI 0x00000000ul ///< Dram DQMask[63:32] used to mask comparison on reads. 1=ignore
+#define CPG_COMPARE_MASK_ECC 0x00 ///< Dram EccMask used to mask comparison on reads. 1=ignore
+#define PRBS_SEED_32 0x062221ul ///< Data PRBS Seed
+#define PRBS_SEED_64 0x066665ul ///< Data PRBS Seed
+#define PRBS_SEED_128 0x026666ul ///< Data PRBS Seed
+#define PRBS_SEED_256 0x044443ul ///< Data PRBS Seed
+
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// Structure for Reliable Read/Write Mode Data
+/// These are values that may need to be referenced by the low level functions
+/// during training and are initialized at the beginning of a particular type of training.
+typedef struct _RRW_SETTINGS {
+ UINT8 CmdTgt; ///< Value to program into CmdTgt
+ UINT8 TgtBankAddressA; ///< Target A Bank address
+ UINT32 TgtRowAddressA; ///< Target A Row address
+ UINT32 TgtColAddressA; ///< Target A Column address
+ UINT8 TgtBankAddressB; ///< Target B Bank address
+ UINT32 TgtRowAddressB; ///< Target B Row address
+ UINT32 TgtColAddressB; ///< Target B Column address
+ UINT32 CompareMaskLow; ///< Compare Mask Bits 31:0
+ UINT32 CompareMaskHigh; ///< Compare Mask Bits 63:32
+ UINT8 CompareMaskEcc; ///< Compare Mask Ecc
+ UINT32 DataPrbsSeed; ///< PRBS Seed value
+} RRW_SETTINGS;
+
+/// DQS training related delays
+typedef enum {
+ AccessRcvEnDly, ///< Receiver enable delay
+ AccessWrDatDly, ///< Write data delay
+ AccessRdDqsDly, ///< Read DQS delay
+ AccessWrDqsDly, ///< Write DQS delay
+ AccessPhRecDly, ///< Phase recovery delay
+ AccessRdDqs2dDly ///< Read DQS 2D delay
+} TRN_DLY_TYPE;
+
+/// Training patterns for position training
+typedef enum {
+ POS_PATTERN_72B, ///< 72 bit pattern
+ POS_PATTERN_256B, ///< 256 bit pattern
+} POS_TRN_PATTERN_TYPE;
+
+/// ODT mode
+typedef enum {
+ MISSION_MODE, ///< ODT during mission mode
+ WRITE_LEVELING_MODE ///< ODT during write leveling
+} ODT_MODE;
+
+/*
+ * DRBN - Dimm-Rank-Byte-Nibble
+ * 31:12 Reserved
+ * 11:09 Dimm (3-bits)
+ * 08 Rank (1-bit)
+ * 07:05 Reserved
+ * 04:01 Byte (4-bits)
+ * 00 Nibble (1-bit)
+ */
+typedef UINT32 DRBN;
+#define MAKE_DRBN(dimm, rank, byte, nibble) ((((UINT32) (dimm)) << 9) | (((UINT32) (rank)) << 8) | \
+(((UINT32) (byte)) << 1) | ((UINT32) (nibble)) )
+#define DIMM_BYTE_ACCESS(dimm, byte) ((((UINT32) (dimm)) << 9) | (((UINT32) (byte)) << 1))
+#define CS_NBBL_ACCESS(cs, nibble) ((((UINT32) (cs)) << 8) | ((UINT32) (nibble)))
+#define DIMM_NBBL_ACCESS(dimm, nibble) ((((UINT32) (dimm)) << 9) | ((UINT32) (nibble)))
+#define DRBN_DIMM(x) ((UINT8) (((UINT32) (x) >> 9) & 0x07))
+#define DRBN_RANK(x) ((UINT8) (((UINT32) (x) >> 8) & 0x01))
+#define DRBN_BYTE(x) ((UINT8) (((UINT32) (x) >> 1) & 0x0F))
+#define DRBN_NBBL(x) ((UINT8) (((UINT32) (x)) & 0x01))
+#define DRBN_DIMM_NBBL(x) ((UINT8) (((UINT32) (x)) & 0x1F))
+
+/* Dimm Type mask */
+#define DT_X4 0x01
+#define DT_X8 0x02
+#define DT_X16 0x04
+#define DT_SR 0x10
+#define DT_DR 0x20
+#define DT_QR 0x40
+
+#define DT_ANY_X4 0x71
+#define DT_ANY_X8 0x72
+#define DT_ANY_X16 0x74
+#define DT_ANY_SR 0x17
+#define DT_ANY_DR 0x27
+#define DT_ANY_QR 0x47
+#define DT_ANY_SR_DR (DT_ANY_SR | DT_ANY_DR)
+#define DT_ANY (DT_ANY_SR | DT_ANY_DR | DT_ANY_QR)
+
+/// Delay Scaling Info Struct - Describes number of delay increments per UI of a delay type
+///
+typedef struct _TRN_DLY_PARMS {
+ UINT8 Min; ///< Minimum Value
+ UINT8 Max; ///< Maximum Value
+ UINT8 Mask; ///< Mask to be applied (i.e. 0xFF if adjustable by one, 0xFE if adjustable by 2, etc.)
+} TRN_DLY_PARMS;
+
+/// Structure for certain data saving needed for DCT.
+typedef struct {
+ UINT8 RcvEnDlyCounts[8]; ///< DQS Receiver Enable Delay counts
+ UINT32 PhRecReg[3]; ///< 3 Phase recovery control registers
+ BOOLEAN Is2Dx4; ///< Check if 2D training is enabled and x4 DIMMs are installed
+} MEM_DCT_CACHE;
+
+/// Structure for table driven support.
+typedef struct _MEM_TBL_ALIAS {
+ UINT8 time; ///< Modification time.
+ UINT8 node:4; ///< Node on which to make modification.
+ UINT8 dct:4; ///< DCT on which to make modification.
+ UINT8 dimm:4; ///< Dimm on which to make modification.
+ UINT8 attr:3; ///< Attribute of modification.
+ UINT8 vtype:1; ///< Flag indicating value type.
+ UINT32 bfindex; ///< Bit field index that need to be modified.
+ union { ///< Union is defined to easy select between single and multiple bytelane cases.
+ struct { ///< Sub-struct used for one bytelane value.
+ UINT16 bytelane:16; ///< Bytelane on which to make modification.
+ UINT32 value; ///< Modified value.
+ UINT8 reserved[3]; ///< Reserved for this purpose
+ } s; ///< single value to one or multiple bytelanes
+ UINT8 bytelanevalue[9]; ///< Array to specify individual bytelane values
+ } data;
+} MEM_TABLE_ALIAS;
+
+/// Structure for Platform Specific Block.
+typedef struct _MEM_PS_BLOCK {
+ UINT8 DramTerm; ///< Dram Term
+ UINT8 QR_DramTerm; ///< Dram Term for QR
+ UINT8 DynamicDramTerm; ///< Dynamic Dram Term
+ UINT8 NumOfReg[MAX_DIMMS_PER_CHANNEL]; ///< Number of registers on each RDIMM (From SPD)
+ UINT8 MR0WR; ///< MR0WR
+ UINT8 MR0CL31; ///< MR0[CL][3:1]
+ UINT8 MR0CL0; ///< MR0CL[0]
+ UINT8 RttNom[8]; ///< RttNom value for maximum 8 chipsels per channel
+ UINT8 RttWr[8]; ///< RttWr value for maximum 8 chipsels per channel
+ UINT8 F0RC8; ///< F0RC8
+ UINT8 F1RC0; ///< F1RC0
+ UINT8 F1RC1; ///< F1RC1
+ UINT8 F1RC2; ///< F1RC2
+ UINT8 RC10OpSpd; ///< RC10[OperatingSpeed]
+ UINT8 LrdimmRowAddrBits[MAX_DIMMS_PER_CHANNEL]; ///< Effective Row address bits used by LRDIMMS
+ UINT16 SpeedLimit[VOLT1_25_ENCODED_VAL + 1]; ///< SpeedLimit of individual VDDIO
+ UINT8 WLSeedVal; ///< Seed value of WL training extracted from PSC table
+ UINT16 HWRxENSeedVal; ///< Seed value of HW RxEn training extracted from PSC table
+ BOOLEAN ProcessorOnDieTerminationOff; ///< processor ODT off
+ ///< FALSE = Phy enables receiver pad termination
+ ///< TRUE = Phy disables receiver pad termination
+ UINT8 CkeStrength; ///< CKE drive strength
+ UINT8 CsOdtStrength; ///< CS ODT drive strength
+ UINT8 AddrCmdStrength; ///< Addr Cmd drive strength
+ UINT8 ClkStrength; ///< CLK drive strength
+ UINT8 DqStrength; ///< Data drive strength
+ UINT8 DqsStrength; ///< DQS drive strength
+ UINT8 OdtStrength; ///< ODT drive strength
+
+ /* PUBLIC functions */
+ BOOLEAN (*MemPDoPs) (struct _MEM_NB_BLOCK *NBPtr); ///< Function that gets Form factor info.
+ VOID (*MemPGetPORFreqLimit) (struct _MEM_NB_BLOCK *NBPtr); ///< Function that gets the speed limit of a dimm population.
+ BOOLEAN (*MemPGetPass1Seeds) (struct _MEM_NB_BLOCK *NBPtr); ///< Function that gets pass1 seeds of WL and RxEn training.
+
+ /* Bitmaps used in looking up PS tables */
+ UINT8 NumOfDimmSlots; ///< See enum type NOD_SUPPORTED
+ UINT8 DimmType; ///< See enum type DIMM_TYPE
+ UINT16 RankType; ///< Rank type of all populated DIMMs. See MemPGetPsRankType.
+} MEM_PS_BLOCK;
+
+/// Structure parameters needed in frequency change of client NB.
+typedef struct _MEM_FREQ_CHANGE_PARAM {
+ UINT16 PllLockTimeDefault; ///< Default PllLockTime
+ UINT8 RdPtrInit667orHigher; ///< RdPtrInit for frequency 667MHz and higher
+ UINT8 RdPtrInitLower667; ///< RdPtrInit for frequency lower than 667MHz
+ UINT8 NclkPeriodMul2x; ///< Multiplier for NclkPeriod in parial sum calculation x 2
+ UINT8 MemClkPeriodMul2x; ///< Multiplier for MemClkPeriod in parial sum calculation x 2
+ UINT8 SyncTimeMul4x; ///< Multiplier for SyncTime
+ UINT16 TDataProp800orHigher; ///< TDataProp for frequency 800MHz or higher
+ UINT16 TDataPropLower800; ///< TDataProp for frequency lower than 800MHz
+} MEM_FREQ_CHANGE_PARAM;
+
+/// List for NB items that are supported
+typedef enum {
+ SetSpareEn, ///< Sets spare enable
+ CheckSpareEn, ///< Spare enabled
+ SetDllShutDown, ///< Sets DllShutDown
+ CheckEccDLLPwrDnConfig, ///< Checks to determine if EccDLLPwrDnConf needs to be adjusted
+ DimmBasedOnSpeed, ///< Checks to determine if Dimm number needs to be adjusted based on speed
+ CheckMaxDramRate, ///< Checks to determine the maximum rate
+ Check1GAlign, ///< Checks to determine if 1 GB alignment is supported
+ DramModeBeforeDimmPres, ///< Check to determine if DRAM mode needs to be set before dimm presence
+ DramModeAfterDimmPres, ///< Check to determine if DRAM mode needs to be set after dimm presence
+ CheckClearOnDimmMirror, ///< Check to determine if we need to clear on DIMM mirror
+ CheckDisDllShutdownSR, ///< Check to determine if DisDllShutdown needs to be set
+ CheckMemClkCSPresent, ///< Check to determine if chipselect needs to be set based on disabled memclocks
+ CheckChangeAvgValue, ///< Check to determine if we need to change average value
+ CheckMaxRdDqsDlyPtr, ///< Check to determine change Max Rd Dqs Delay
+ CheckPhyFenceTraining, ///< Check to determine if we need to Phy Fence training
+ CheckGetMCTSysAddr, ///< Check to determine if we need to GetMCTSysAddr
+ CheckSendAllMRCmds, ///< Check to determine if we need to SendAllMRCmds
+ CheckFindPSOverideWithSocket, ///< Check to determine if we need to Find PSOveride With Socket
+ CheckFindPSDct, ///< Check to determine if we need to Find PSOveride With DCT
+ CheckODTControls, ///< Check to determine if we need to set ODT controls
+ CheckDummyCLRead, ///< Check to determine if an extra dummy read is required
+ CheckDllStdBy, ///< Check to determine if setting DLL stand by is required
+ CheckSlewWithMarginImprv, ///< Check to determine if setting of Slew With MarginImprv is required
+ CheckSlewWithoutMarginImprv, ///< Check to determine if setting of Slew Without MarginImprv is required
+ CheckDllSpeedUp, ///< Check to determine if setting of Dll SpeedUp is required
+ CheckDllRegDis, ///< Check to determine if setting of DLL Regulator Disable is required
+ FenceTrnBeforeDramInit, ///< Check to determine if fence training has been done before Dram init
+ WLSeedAdjust, ///< Check to determine if WL seed needs to be adjusted
+ UnifiedNbFence, ///< Check to determine if Phy fence is of Unified NB
+ AdjustTwr, ///< Check to determine if Twr needs to be adjusted
+ ChannelPDMode, ///< Check to determine if channel power down mode is the only that is supported
+ ForceEnMemHoleRemapping, ///< Check to determine if we need to force enabling memory hole remapping
+ AdjustTrdrdSD, ///< Check to determine if we need to adjust TrdrdSD
+ ReverseMaxRdLatTrain, ///< Check to determine if reverse (pass to fail) algorithm is supported for MaxRdLat training
+ SkipErrTrain, ///< Check to determine if skip error training is supported
+ DramSrHys, ///< Check to determine if DRAM SR hysteresis is supported
+ PchgPDMode, ///< Check to determine if Precharge powerdown mode is supported
+ EccByteTraining, ///< Check to determine if DRAM ECC Byte training
+ CheckDrvImpCtrl, ///< Check to determine if we need to set DrvImpCtrl
+ CheckDramTerm, ///< Check to determine if we need to set DramTerm
+ CheckDramTermDyn, ///< Check to determine if we need to set DramTermDyn
+ CheckQoff, ///< Check to determine if we need to set Qoff
+ CheckSetSameDctODTsEn, ///< Check to defermine if we need to set "ODTsEn" the same on each DCT
+ WLNegativeDelay, ///< Check to determine if the NB can tolerate a negtive WL delay value
+ SchedDlySlot1Extra, ///< Check to determine if DataTxSchedDly Slot1 equation in slowMode to subtract an extra MEMCLK
+ TwoStageDramInit, ///< Check to determine if we need to seperate Draminit into 2 stages. The first one processes info on all nodes. The second one does Dram Init.
+ ExtraPclkInMaxRdLat, ///< Check to determine if an extra PCLK is needed for MaxRdLat
+ CsrPhyPllPdEn, ///< Check to determine if CSR Phy PLL Powerdown is enabled or not
+ AdjustTrc, ///< Check to determine if we need to adjust Trc
+ ProgramCsrComparator, ///< Check to determine if we need to program CsrComparator with the same value as D18F2x09C_x0D0F_0[7:0]1F[RxVioLvl]
+ EnProcOdtAdvForUDIMM, ///< Check to determine if we need to always enable ProcOdtAdv for UDIMM
+ SetTDqsForx8DimmOnly, ///< Only set MR1[TDQS] for x8 DIMMs when x4 and x8 DIMMs are both present on a channel
+ WlRttNomFor1of3Cfg, ///< Set Rtt_Nom = Rtt_Wr in one of three DIMMs per channel configurations
+ PerformanceOnly, ///< Only support performance policy, does not support battery life policy
+ AdjustTrp, ///< Check to determin if Trp needs to be adjusted
+ DllStaggerEn, ///< Check to determin if Dll Stagger should be turned on
+ RxChnMntClksEn, ///< Check to determin if Receive Channel Maintenance Clock Enable should be turned on
+ ForcePhyToM0, ///< Force Phy to M0
+ G5DimmInD3Socket, ///< Check to determine if DDR3 DIMM socket will be used for GDDR5 DIMMs as well
+ MasterDct1Relocate, ///< Check to determine if Master DCT for channel is DCT 3 instead of DCT 1
+ PerDimmAggressors2D, ///< Use only the even Chipselect of each installed DIMM as an Aggressor
+ OptimizedPatternWrite2D, ///< Optimize 2D training to Write Pattern Once, read many times.
+ AMPIsEnabled, ///< Check to detemine if AMP is exactly enabled.
+ ScrubberEn, ///< Check to determine if DRAM scrubber is already enabled
+ SwitchRdDqsDlyForMaxRdLatency, ///< Use the different RdDqsDly value for MaxRdLatency calculation before/after DQS training
+
+ EnumSize ///< Size of list
+} NB_SUPPORTED;
+
+/// List for family specific functions that are supported
+typedef enum {
+ BeforePhyFenceTraining, ///< Family specific tasks before Phy Fence Training
+ BeforeMemClkFreqVal, ///< hook before setting MemClkFreqVal bit
+ AfterMemClkFreqVal, ///< Override PllMult and PllDiv
+ OverridePllMult, ///< Override PllMult
+ OverridePllDiv, ///< Override PllDiv
+ BeforeMemClr, ///< Before MemClr
+ SendMrsCmdsPerCs, ///< Send MRS commands per CS
+ SetupHwTrainingEngine, ///< Setup Hardware training engine for specific training type
+ OverrideRcvEnSeed, ///< Override seed for hardware based RcvEn training
+ AddlMaxRdLatTrain, ///< Perform additional MaxRdLat training if needed
+ ForceAutoComp, ///< Force Auto Comp
+ DetectMemPllError, ///< Detect MemPll Divide by 3 bug
+ ReEnablePhyComp, ///< Re-Enable Phy Compensation after RcvEn Training
+ ExtractWLODT, ///< Extract WL ODT value thr given ODT pattern
+ DCTSelectSwitch, ///< Select DCT when we switch DCT
+ ScrubberErratum, ///< Erratum for setting scrubber rate
+ MR0_PPD, ///< Override MR0[PPD]
+ GetDdrMaxRate, ///< Interpret DdrMaxRate with Familiy-specific encoding
+ ExitPhyAssistedTraining, ///< Perform family specific tasks when exiting phy assisted training
+ AfterSaveRestore, ///< Action after save/restore execution
+ OverrideDataTxFifoWrDly, ///< Override DataTxFifoWrDly based on training result of WrDatDly
+ OverrideRcvEnSeedPassN, ///< Override seed for hardware based RcvEn training where N greater than 0
+ AfterMemClkFreqChg, ///< Reprogram DIMMs' buffers after MEMCLK frequency change
+ AdjustTxpdll, ///< Adjust Txpdll value to encoded register value
+ CalcWrDqDqsEarly, ///< Calculate WrDqDqsEarly
+ TrainWlPerNibble, ///< Train Write Leveling per nibble
+ TrainWlPerNibbleAdjustWLDly, ///< Train WL per nibble and adjust the WL delay
+ TrainWlPerNibbleSeed, ///< Save the seed for WL nibble based training
+ TrainRxEnPerNibble, ///< Train Rx Enable Training per nibble
+ TrainRxEnAdjustDlyPerNibble, ///< Train Rx Enable Training nibble and adjust the RxEn delay
+ TrainRxEnGetAvgDlyPerNibble, ///< Display Rx Enable Training average nibble value for each BL
+ InitPerNibbleTrn, ///< Initiates Per Nibble Training.
+ BeforeSetCsTri, ///< Modify CS tri-state bit map.
+ ForceRdDqsPhaseB, ///< Force RdDqsDly to phase B
+ ProgramPOdtOff, ///< Disable/enable receiver pad termination
+ SetDqsODT, ///< Set DQS ODT
+ DisLowPwrDrvStr, ///< Hook to skip setting LowPowerDriveStrengthEn
+ AdjustRdDqsDlyOffset, ///< Adjust the bit offset of the RdDqsDly Bit Bitfield before writing and after reading
+ ResetRxFifoPtr, ///< Reset RxFifo pointer during Read DQS training
+ EnableParityAfterMemRst, ///< Enable DRAM Address Parity after memory reset.
+ FinalizeVDDIO, ///< Finalize VDDIO
+ TrainingNibbleZero, ///< Check for see Nibble zero is being trained (individually or with x8 training)
+ ProgOdtControl, ///< Calculate RdOdtTrnOnDly and RdOdtOnDuration
+ SetSkewMemClk, ///< Set SkewMemClk
+ OverrideWLSeed, ///< Override WL seed
+ AdjustCSIntLvLowAddr, ///< Adjust CS interleaving low address
+ Adjust2DVrefStepSize, ///< Adjusts the step size for Vref during 2D RdDqs training
+ Adjust2DDelayStepSize, ///< Adjusts the step size for RdDqs during 2D RdDqs training
+ ReleaseNbPstate, ///< Release NB P-state
+ InitializeRxEnSeedlessTraining, ///< Initializes RxEn Seedless Training
+ TrackRxEnSeedlessRdWrNoWindBLError, ///< Track Bytelane Errors resulting from No window for RxEn Seedless Training
+ TrackRxEnSeedlessRdWrSmallWindBLError, ///< Track Bytelane Errors resulting from Small window for RxEn Seedless Training
+ InitialzeRxEnSeedlessByteLaneError, ///< Initializes ByteLaneError to False for RxEn Seedless Training
+ InitExtMMIOAddr, ///< Initializes extended MMIO address space
+ MemPstateStageChange, ///< handle training when multiple memory pstate is supported
+ ProgramFence2RxDll, ///< program RxDll in a different register
+ RdDqsDlyRestartChk, ///< Check to see if we need to restart RdDqsDly
+ BeforeWrDatTrn, ///< Check to see if special handling is needed before WrDatDly Training
+ ForceLvDimmVoltage, ///< Force LVDIMM voltage to 1.5V
+ BfAfExcludeDimm, ///< Workaround before and after excluding dimms
+ AdjustWrDqsBeforeSeedScaling, ///< For some family, negative WL is compensated and WrDqs needs to be adjusted before seed scaling
+ OverridePrevPassRcvEnDly, ///< Check to determine if we need override PrevPassRcvEnDly
+ AdjustRdPtrInit, ///< Adjust RdPtrInit value according to certain conditions
+ Adjust2DPhaseMaskBasedOnEcc, ///< Adjusts the Phase Mask Based on ECC
+ FixupSysAddr, ///< Adjust physical address before identifying DIMM.
+ RegAccessFence, ///< Make sure previous phy registers writes are done
+ WLMR1, ///< Check to see if we need to do special things when sending MR1 during WL
+ FixupUmaInfo, ///< Fix up UMA info for a specific family
+ RelocatePscTblEntryByMotherBoardLayer, ///< Relocate the PSC table entry pointer by mother board layer design
+ AmpVoltageDisp, ///< To display AMP voltage values
+ AdjustHwRcvEnSeedGross, ///< Adjust the SeedGross value for hardware receiver enable training under certaion conditions
+ ForceEccSymbolSize, ///< Force the ECC Symbol Size to x4 or x8
+ AdjustRdDqsDlyForMaxRdLat, ///< Adjust RdDqsDly used for MaxRdLatency calculation
+ SetMaxRdLatBasedOnSeededRxEnDly, ///< Prior to DQS Receiver Enable Training, Set MaxRdLatency value based on seeded value of RxEnDly
+ /// 2D Read/Write Training Feature Functions
+ RdWr2DTraining, ///< Main Common 2D Rd/Wr Training Fucntion
+ CheckRdWr2DTrainingPerConfig, ///< Determine if 2D Training should be run on the current config
+ RdWr2DSelectIntExtVref, ///< 2D Training function to select internal or external Vref
+ RdWr2DProgramVref, ///< 2D Training function to Program Vref
+ RdWr2DScaleVref, ///< 2D Training function to scale Vref to the memory controller register
+ RdWr2DProgramDelays, ///< 2D Training function program delay values
+ RdWr2DProgramMaxVref, ///< 2D Training function to set final vref
+ RdWr2DDataCollection, ///< 2D Training Data Collection
+ RdWr2DInitVictim, ///< 2D Training Victim Initialization
+ RdWr2DInitVictimChipSel, ///< 2D Training Initialize Victim CS to be trained
+ RdWr2DStartVictim, ///< 2D Training Start Victim Data pattern
+ RdWr2DFinalizeVictim, ///< 2D Training Finalize Victim Traffic
+ RdWr2DCompareInPhase, ///< 2D Training In-Phase comparison
+ RdWr2DCompare180Phase, ///< 2D Training 180 Degree ou-of-phase comparison
+ RdWr2DProgramDataPattern, ///< 2D Training Program Data Pattern
+ /// End 2D Read/Write Training Functions
+ TurnOnAggressorChannels, ///< Enable the Aggressor channels.
+ StartAggressor, ///< Start Aggressor pattern generation.
+ StopAggressor, ///< Stop Aggressor pattern generation.
+ DisableMemHoleMapping, ///< Disable Memory Hole Settings
+ RestoreMemHoleMapping, ///< Enable Memory Hole Settings
+ PhyInitVref, ///< Program VrefSel during phy init
+ NumberOfHooks ///< Size of list
+} FAMILY_SPECIFIC_FUNC_INDEX;
+
+///< Entry for SPD Timing
+typedef struct {
+ BIT_FIELD_NAME BitField; ///< Bit field name of the timing
+ UINT8 Min; ///< Minimum value for timing
+ UINT8 Max; ///< Maximum value for timing
+ UINT8 Bias; ///< Bias from actual value
+ UINT8 Ratio_x2; ///< Actual value will be multiplied by (Ratio_x2/2)
+} CTENTRY;
+
+/// Structure for northbridge block.
+typedef struct _MEM_NB_BLOCK {
+ MEM_DATA_STRUCT *MemPtr; ///< Point to MEM_DATA_STRUCT.
+ MEM_PARAMETER_STRUCT *RefPtr; ///< Point to MEM_PARAMETER_STRUCT.
+ DIE_STRUCT *MCTPtr; ///< point to current Node's MCT struct
+ DCT_STRUCT *DCTPtr; ///< point to current Node's DCT struct
+ DCT_STRUCT *AllDCTPtr; ///< point to all Node's DCT structs
+ CH_DEF_STRUCT *ChannelPtr; ///< point to current channel data
+ SPD_DEF_STRUCT *SPDPtr; ///< Point to SPD data for current DCT.
+ struct _MEM_TECH_BLOCK *TechPtr; ///< point to technology block.
+ struct _MEM_FEAT_BLOCK_NB *FeatPtr; ///< point to NB Specific feature block.
+ struct _MEM_SHARED_DATA *SharedPtr; ///< Pointer to Memory scratchpad area
+ struct _MEM_NB_BLOCK *AdjacentDieNBPtr; ///< Pointer to Adjacent Die In same socket
+ BOOLEAN DieEnabled[MAX_NODES_SUPPORTED];///< Indicates the Dies that are enabled
+ SPD_DEF_STRUCT *AllNodeSPDPtr; ///< Point to SPD data for the system.
+ DIE_STRUCT *AllNodeMCTPtr; ///< point to all Node's MCT structs
+ UINT8 DimmToBeUsed; ///< Dimm to be used in recovery mode.
+ MEM_PS_BLOCK *PsPtr; ///< point to platform specific block
+ MEM_PS_BLOCK *PSBlock; ///< point to the first platform specific block on this node.
+ MEM_FREQ_CHANGE_PARAM *FreqChangeParam; ///< pointer to parameter of frequency change.
+
+ PCI_ADDR PciAddr; ///< PCI address for this node
+ TSEFO *NBRegTable; ///< contains all bit field definitions
+
+ UINT8 Node; ///< current node.
+ UINT8 Dct; ///< current DCT.
+ UINT8 Channel; ///< current channel.
+ UINT8 DctCount; ///< number of DCTs on the current NB.
+ UINT8 ChannelCount; ///< number of channels per DCT of the current NB.
+ UINT8 NodeCount; ///< number of Nodes supported
+ UINT8 CsPerDelay; ///< number of CS controlled per set of delay registers.
+ UINT8 CsPerChannel; ///< number of CS per channel.
+ BOOLEAN Ganged; ///< mode for current MCT controller.
+ POS_TRN_PATTERN_TYPE PosTrnPattern; ///< specifies the pattern that should be used for position training.
+ BOOLEAN MemCleared; ///< memory clear flag.
+ UINT32 CPGInit; ///< continuous pattern generation flag.
+ UINT16 StartupSpeed; ///< startup speed for DDR3.
+ UINT16 RcvrEnDlyLimit; ///< maximum value that RcvrEnDly field can take.
+ UINT32 McaNbCtlReg; ///< reserve MCA reports.
+ UINT32 VarMtrrHiMsk; ///< variable MTRR mask for upper 32 bits.
+ UINT32 CsRegMsk; ///< mask for CS base register
+ UINT32 NBClkFreq; ///< Current NB Clock frequency
+ UINT8 DefDctSelIntLvAddr; ///< Default DctSelIntLvAddr
+ UINT8 TrainingSequenceIndex; ///< Index into the Training Sequence
+ UINT8 RdDqsDlyForMaxRdLat; ///Maximum value of Read DQS Delay used in MaxRdLatency calculation
+ RRW_SETTINGS RrwSettings; ///<Settings for Reliable Read/Write mode
+ UINT8 TotalRdDQSDlyRange; ///< Max number of RdDQS Delays
+ UINT8 TotalWrDatDlyRange; ///< Max number of WrDat Delays
+ INT16 MinRxEnSeedGross; ///< Minimum value of the Receiver Enable
+ INT16 MaxRxEnSeedTotal; ///< Maximum value of the Receiver Enable
+ UINT8 TotalMaxVrefRange; ///< Max number of Vref settings
+ UINT8 MaxSeedCount; ///< Max number of Data patterns to be generated
+ UINT32 TotalBitTimes2DRdTraining; ///< Total Bit Times for 2D Read Training
+ UINT32 TotalBitTimes2DWrTraining; ///< Total Bit Times for 2D Write Training
+ UINT8 Vref; ///< Vref setting
+ UINT8 RdDqsDly; ///< RdDQSDly setting
+ UINT16 MaxFreqVDDIO[VOLT1_25 + 1]; ///< Max Frequency each voltage supports.
+ UINT32 PhaseLaneMask; ///< Lane Mask for Inphase and 180 phase registers
+ UINT8 MaxDiamondStep; ///< Maximum Diamond step Size
+ UINT8 DiamondWidthRd; ///< Diamond Width for 2D Rd Training
+ UINT8 DiamondWidthWr; ///< Diamond Width for 2D Wr Training
+ UINT8 RdRolloverMultiple; ///< 2D Training Read Rollover Multiple.
+ UINT8 CurrentAggressorCSTarget[MAX_CHANNELS_PER_SOCKET]; ///< Current Aggressor CS targeted
+ UINT8 MaxAggressorCSEnabled[MAX_CHANNELS_PER_SOCKET]; ///< Maximum Number of Aggressor CS targeted
+ UINT8 MaxAggressorDimms[MAX_CHANNELS_PER_SOCKET]; ///< Maximum Number of Aggressor CS DIMMs
+ UINT8 InitialAggressorCSTarget[MAX_CHANNELS_PER_SOCKET]; ///< Initial Number of the first CS Aggressor
+ BOOLEAN OrigDisAutoRefreshState; ///< Original state of Dis Auto Refresh
+ BOOLEAN Execute1dMaxRdLatTraining; ///< Indicates if 1D training should be executed
+ BOOLEAN Override2DTraining; ///< 2D training has been overriden
+
+ MEM_DCT_CACHE DctCache[MAX_CHANNELS_PER_SOCKET]; ///< Allocate space for MCT_DCT_CACHE.
+ MEM_DCT_CACHE *DctCachePtr; ///< pointer to current Node's Node struct
+
+ /* Temporary storage */
+ BOOLEAN ClToNbFlag; ///< is used to restore ClLinesToNbDis bit after memory
+ UINT8 NbFreqChgState; ///< is used as a state index in NB frequency change state machine
+ UINT32 NbPsCtlReg; ///< is used to save/restore NB Pstate control register
+ MEM_PSTATE MemPstate; ///< is used to save current memory Pstate context
+ MEM_PSTATE_STAGE MemPstateStage; ///< is used to save the current stage status of memory pstate
+ RDDQSDLY_RTN_STAT RdDqsDlyRetrnStat; ///< is used to check if RdDqsDly training needs to be restarted
+ CONST UINT32 *RecModeDefRegArray; ///< points to an array of default register values that are set for recovery mode
+ struct _MEM_DRAM_INFO *DevInfoArray; ///< points to an array of DRAM device info
+ UINT32 DisDramScrub; ///< is used to save scrubber status
+ UINT32 LgcyMmioHoleEnMap; ///< is used to save LgcyMmioHoleEn for all the ranges
+
+ ///< Determines if code should be executed on a give NB
+ BOOLEAN IsSupported[EnumSize];
+ BOOLEAN (*FamilySpecificHook[NumberOfHooks]) (struct _MEM_NB_BLOCK *NBPtr, VOID *OptParam); ///< This array of pointers point to
+ ///< family specific functions.
+
+ /* PUBLIC functions */
+ VOID (*SwitchDCT) (struct _MEM_NB_BLOCK *NBPtr, UINT8 DCT); ///< Switch to current DCT.
+ VOID (*SwitchChannel) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Channel); ///< Switch to current channel.
+ VOID (*SetMaxLatency) (struct _MEM_NB_BLOCK *NBPtr, UINT16 MaxRcvEnDly); ///< Set Max Rd Latency.
+ VOID (*getMaxLatParams) (struct _MEM_NB_BLOCK *NBPtr, UINT16 MaxDlyForMaxRdLat, UINT16 *MinDly, UINT16 *MaxDly, UINT16 *DlyBias); ///< retrieves the Max latency parameters.
+ BOOLEAN (*GetSysAddr) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Receiver, UINT32 *Addr); ///< Get system address for training dimm.
+ BOOLEAN (*RankEnabled) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Receiver); ///< Check if a rank has been enabled.
+ BOOLEAN (*InitializeMCT) (struct _MEM_NB_BLOCK *NBPtr); ///< MCT initialization.
+ BOOLEAN (*FinalizeMCT) (struct _MEM_NB_BLOCK *NBPtr); ///< sets final values in BUCFG and BUCFG2.
+ BOOLEAN (*InitMCT) (struct _MEM_NB_BLOCK *NBPtr); ///< main entry call for memory initialization.
+ VOID (*SendMrsCmd) (struct _MEM_NB_BLOCK *NBPtr); ///< send MRS command.
+ VOID (*sendZQCmd) (struct _MEM_NB_BLOCK *NBPtr); ///< send ZQ command.
+ BOOLEAN (*TrainingFlow) (struct _MEM_NB_BLOCK *NBPtr); ///< Set the training flow control
+ VOID (*WritePattern) (struct _MEM_NB_BLOCK *NBPtr, UINT32 Address, UINT8 Pattern[], UINT16 ClCount); ///< Write training pattern.
+ VOID (*ReadPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT32 Address, UINT16 ClCount); ///< Read training pattern.
+ VOID (*GenHwRcvEnReads) (struct _MEM_NB_BLOCK *NBPtr, UINT32 Address); ///< generates a continuous burst of reads during HW RcvEn training.
+ UINT16 (*CompareTestPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount); ///< Compare training pattern.
+ UINT16 (*InsDlyCompareTestPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount); ///< Compare training pattern using 1 beat offset to check for insertion delay
+ BOOLEAN (*StitchMemory) (struct _MEM_NB_BLOCK *NBPtr); ///< combines all the memory into a contiguous map.
+ VOID (*ProgramCycTimings) (struct _MEM_NB_BLOCK *NBPtr); ///< programs the memory controller with SPD timings.
+ BOOLEAN (*AutoConfig) (struct _MEM_NB_BLOCK *NBPtr); ///< programs the memory controller with configuration parameters
+ BOOLEAN (*PlatformSpec) (struct _MEM_NB_BLOCK *NBPtr); ///< programs platform specific parameters.
+ VOID (*DisableDCT) (struct _MEM_NB_BLOCK *NBPtr); ///< disable a DCT if no dimm presents.
+ VOID (*StartupDCT) (struct _MEM_NB_BLOCK *NBPtr); ///< start a DCT.
+ VOID (*SyncTargetSpeed) (struct _MEM_NB_BLOCK *NBPtr); ///< Check and sync the target speed of all channels of this node.
+ VOID (*ChangeFrequency) (struct _MEM_NB_BLOCK *NBPtr); ///< Frequency change sequence.
+ BOOLEAN (*RampUpFrequency) (struct _MEM_NB_BLOCK *NBPtr); ///< Change frequency to the next supported level.
+ BOOLEAN (*ChangeNbFrequency) (struct _MEM_NB_BLOCK *NBPtr); ///< Change NB frequency.
+ VOID (*PhyFenceTraining) (struct _MEM_NB_BLOCK *NBPtr); ///< Phy fence training.
+ BOOLEAN (*SyncDctsReady) (struct _MEM_NB_BLOCK *NBPtr); ///< Synchronize DCTs.
+ BOOLEAN (*HtMemMapInit) (struct _MEM_NB_BLOCK *NBPtr); ///< Memory map initialization.
+ VOID (*SyncAddrMapToAllNodes) (struct _MEM_NB_BLOCK *NBPtr); ///< copies the Node 0 map to all the other nodes.
+ BOOLEAN (*CpuMemTyping) (struct _MEM_NB_BLOCK *NBPtr); ///< MTRR and TOM setting.
+ VOID (*BeforeDqsTraining) (struct _MEM_NB_BLOCK *NBPtr); ///< processes needed before DQS training.
+ VOID (*AfterDqsTraining) (struct _MEM_NB_BLOCK *NBPtr); ///< processes needed after DQS training.
+ BOOLEAN (*OtherTiming) (struct _MEM_NB_BLOCK *NBPtr); ///< setting non-spd timing.
+ VOID (*UMAMemTyping) (struct _MEM_NB_BLOCK *NBPtr); ///< MTRR and TOM setting needed for UMA platform.
+ VOID (*Feature) (struct _MEM_NB_BLOCK *NBPtr); ///< Feature support.
+ UINT8 (*GetSocketRelativeChannel) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Dct, UINT8 Channel); ///< Get channel number relative to a socket.
+ VOID (*SetDramOdtRec) (struct _MEM_NB_BLOCK *NBPtr, ODT_MODE OdtMode, UINT8 ChipSelect, UINT8 TargetCS); ///< Set Dram ODT.
+ UINT32 (*GetSysAddrRec) ( VOID ); ///< Get system address for training.
+ VOID (*SwitchNodeRec) (struct _MEM_NB_BLOCK *NBPtr, UINT8 NodeID); ///< Switch to current node.
+ VOID (*TechBlockSwitch) (struct _MEM_NB_BLOCK *NBPtr); ///< Selects appropriate Tech functions for the NB.
+ VOID (*SetEccSymbolSize) (struct _MEM_NB_BLOCK *NBPtr); ///< Set Ecc Symbol Size.
+ VOID (*GetTrainDlyParms) (struct _MEM_NB_BLOCK *NBPtr, TRN_DLY_TYPE TrnDly, TRN_DLY_PARMS *Parms); ///< Retrieve Specific Delay range info for current NB under current conditions.
+ AGESA_STATUS (*TrainingPatternInit) (struct _MEM_NB_BLOCK *NBPtr); ///< Initialize the training Pattern
+ AGESA_STATUS (*TrainingPatternFinalize) (struct _MEM_NB_BLOCK *NBPtr); ///< Finalize the training Pattern
+ BOOLEAN (*GetApproximateWriteDatDelay) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Index, UINT8 *Value); ///< Retrieve the next WrDat Delay Approximation
+ VOID (*FlushPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT32 Address, UINT16 ClCount); ///<Flush the training pattern
+ UINT8 (*MinDataEyeWidth) (struct _MEM_NB_BLOCK *NBPtr); ///<Get Min Data Eye Width in 32nds of a UI
+ VOID (*MemNCapSpeedBatteryLife) (struct _MEM_NB_BLOCK *NBPtr); ///< Caps speed based on battery life check.
+ UINT32 (*GetUmaSize) (struct _MEM_NB_BLOCK *NBPtr); ///< Get Uma Size
+ UINT8 (*GetMemClkFreqId) (struct _MEM_NB_BLOCK *NBPtr, UINT16 Speed); ///< Translate MemClk frequency in MHz to MemClkFreq value
+ VOID (*EnableSwapIntlvRgn) (struct _MEM_NB_BLOCK *NBPtr, UINT32 Base, UINT32 Limit); ///< Enable swapped interleaving region
+ BOOLEAN (*ChangeNbFrequencyWrap) (struct _MEM_NB_BLOCK *NBPr, UINT32 NBPstate); ///< Wrapper for NB Pstate change function
+ VOID (*WaitXMemClks) (struct _MEM_NB_BLOCK *NBPr, UINT32 MemClkCount); ///< Waits a specified number of MemClks
+ UINT16 (*GetMemClkFreqInCurrentContext) (struct _MEM_NB_BLOCK *NBPtr); ///< Obtains the memory frequency in the current context
+ VOID (*ProgramNbPsDependentRegs) (struct _MEM_NB_BLOCK *NBPtr); ///< Programs NB Pstate dependent registers
+ VOID (*AllocateC6Storage) (struct _MEM_NB_BLOCK *NBPtr); ///< Allocates DRAM region for Core C6
+
+ /* PUBLIC Get/Set register field functions */
+ UINT32 (*GetBitField) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName); ///< Pci register bit field read.
+ VOID (*SetBitField) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName, UINT32 Value); ///< Pci register bit field write.
+ BOOLEAN (*BrdcstCheck) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName, UINT32 Value); ///< Pci register bit field broadcast read.
+ VOID (*BrdcstSet) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName, UINT32 Value); ///< Pci register bit field broadcast write.
+ VOID (*PollBitField) (struct _MEM_NB_BLOCK *NBPtr, BIT_FIELD_NAME FieldName, UINT32 Field, UINT32 MicroSecond, BOOLEAN IfBroadCast); ///< Poll a Pci register bitfield.
+ UINT32 (*GetTrainDly) (struct _MEM_NB_BLOCK *NBPtr, TRN_DLY_TYPE TrnDly, DRBN DrbnVar); ///< Training register bit field read.
+ VOID (*SetTrainDly) (struct _MEM_NB_BLOCK *NBPtr, TRN_DLY_TYPE TrnDly, DRBN DrbnVar, UINT16 Value); ///< Training register bit field write.
+ AGESA_STATUS (*InitRecovery) (struct _MEM_NB_BLOCK *NBPtr); ///< Recover mode memory init
+ VOID (*MemRecNInitializeMctNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Initialize MCT changes
+ VOID (*MemRecNFinalizeMctNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Finalize MCT changes
+ VOID (*MemNInitPhyComp) (struct _MEM_NB_BLOCK *NBPtr); ///< Init Phy compensation
+ VOID (*MemNBeforeDramInitNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Before Dram init
+ BOOLEAN (*MemNIsIdSupportedNb) (CPU_LOGICAL_ID *LogicalIdPtr); ///< Determines if a given CPU id is supported
+ BOOLEAN (*MemNPlatformSpecificFormFactorInitNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Platform specific functions
+ VOID (*MemNSetOtherTimingNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Set non-spd timings
+ VOID (*MemNBeforePlatformSpecNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Apply settings prior to platform specific settings
+ UINT32 (*MemNCmnGetSetFieldNb) (struct _MEM_NB_BLOCK *NBPtr, UINT8 IsSet, BIT_FIELD_NAME FieldName, UINT32 Field); ///< Sets a register value
+ UINT32 (*MemNcmnGetSetTrainDly) (struct _MEM_NB_BLOCK *NBPtr, UINT8 IsSet, TRN_DLY_TYPE TrnDly, DRBN DrbnVar, UINT16 Field); ///< Sets a training delay field
+ VOID (*MemPPhyFenceTrainingNb) (struct _MEM_NB_BLOCK *NBPtr); ///< Phy Fence training
+ VOID (*MemPNodeMemBoundaryNb) (struct _MEM_NB_BLOCK *NBPtr, UINT32 *NodeSysLimit); ///< Phy Fence training
+ UINT32 (*MemRecNCmnGetSetFieldNb) (struct _MEM_NB_BLOCK *NBPtr, UINT8 IsSet, BIT_FIELD_NAME FieldName, UINT32 Field); ///< This functions sets bit fields in recover mode
+ UINT32 (*MemRecNcmnGetSetTrainDlyNb) (struct _MEM_NB_BLOCK *NBPtr, UINT8 IsSet, TRN_DLY_TYPE TrnDly, DRBN DrbnVar, UINT16 Field); ///< This functions sets bit fields in recover mode
+ VOID (*MemRecNSwitchDctNb) (struct _MEM_NB_BLOCK *NBPtr, UINT8 NodeID); ///< S3 Exit self refresh register
+ VOID (*MemNPFenceAdjustNb) (struct _MEM_NB_BLOCK *NBPtr, INT16 *Value16); ///< Adjust Avg PRE value of Phy fence training
+ VOID (*MemNPrepareRcvrEnDlySeed) (struct _MEM_NB_BLOCK *NBPtr); ///< Seed valude for HW RxEn training
+ UINT8 (*MemNGetDramTerm) (struct _MEM_NB_BLOCK *NBPtr, UINT8 ChipSel); ///< Dram Term value
+ UINT8 (*MemNGetDynDramTerm) (struct _MEM_NB_BLOCK *NBPtr, UINT8 ChipSel); ///< Dynamic Dram Term value
+ VOID (*MemNSaveMR0) (struct _MEM_NB_BLOCK *NBPtr, UINT32 MrsAddress); ///< Save MR0 during memory initialization
+ UINT32 (*MemNGetMR0CL) (struct _MEM_NB_BLOCK *NBPtr); ///< MR0[CL] value
+ UINT32 (*MemNGetMR0WR) (struct _MEM_NB_BLOCK *NBPtr); ///< MR0[WR] value
+ UINT32 (*MemNGetMR2CWL) (struct _MEM_NB_BLOCK *NBPtr); ///< MR2[CWL] value
+ UINT32 (*InPhaseCompareRdDqs2DPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount); ///< InPhase Compare training pattern for RdDQS 2D training
+ UINT32 (*Phase180CompareRdDqs2DPattern) (struct _MEM_NB_BLOCK *NBPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount); ///< 180 Compare training pattern for RdDQS 2D training
+ VOID (*AgressorContinuousWrites) (struct _MEM_NB_BLOCK *NBPtr, UINT8 SeedCount, BOOLEAN TurnOnInfinite); ///< Enables/Disables continuous writes on unused agressor channels
+ UINT32 (*GetPrbs2dRdDqsSeed) (struct _MEM_NB_BLOCK *NBPtr, UINT8 SeedCount); ///< Prbs Seed for 2d RdDqs training
+ VOID (*DisableInfiniteWritePattern) (struct _MEM_NB_BLOCK *NBPtr); ///< Disables infinite Write training pattern.
+ VOID (*EnableInfiniteWritePattern) (struct _MEM_NB_BLOCK *NBPtr); ///< Enables infinite training pattern.
+ VOID (*InitializeRdDqs2dVictimContinuousWrites) (struct _MEM_NB_BLOCK *NBPtr); ///< Initializes victim infinite training pattern for RdDqs2d Training.
+ VOID (*FinalizeRdDqs2dVictimContinuousWrites) (struct _MEM_NB_BLOCK *NBPtr); ///< Finalizes victim infinite training pattern for RdDqs2d Training.
+ VOID (*InitializeRdDqs2dVictimChipSelContinuousWrites) (struct _MEM_NB_BLOCK *NBPtr); ///< Initializes victim infinite training pattern for RdDqs2d Training for victim CS.
+ VOID (*StartRdDqs2dVictimContinuousWrites) (struct _MEM_NB_BLOCK *NBPtr , UINT8 SeedCount); ///< Starts victim infinite training pattern for RdDqs2d Training.
+ BOOLEAN (*ConfigureDCTForGeneral) (struct _MEM_NB_BLOCK *NBPtr); ///< Configure DCT For General use.
+ BOOLEAN (*ConfigureDCTForTraining) (struct _MEM_NB_BLOCK *NBPtr); ///< Configure DCT For Training.
+ BOOLEAN (*ConfigureDCTNonExplicitSeq) (struct _MEM_NB_BLOCK *NBPtr); ///< Configure DCT for Non Explicit Seq.
+ BOOLEAN (*SynchronizeChannels) (struct _MEM_NB_BLOCK *NBPtr); ///< Synchronize Channels.
+ BOOLEAN (*ConfigureDCTNormal) (struct _MEM_NB_BLOCK *NBPtr); ///< Configure DCT for Normal operation.
+ BOOLEAN (*MemN2DRdDQSDataCollection) (struct _MEM_NB_BLOCK *NBPtr); ///< 2D training data collection method
+ UINT32 (*MemNGetMemoryWidth) (struct _MEM_NB_BLOCK *NBPtr); ///< Get memory width
+ VOID (*MemNDisableScrubber) (struct _MEM_NB_BLOCK *NBPtr); ///< Disable scrubber prior to any write access to additonal address space
+ VOID (*MemNRestoreScrubber) (struct _MEM_NB_BLOCK *NBPtr); ///< Restore scrubber settings after write access to additonal address space
+ VOID (*MemNSetEccExclusionRange) (struct _MEM_NB_BLOCK *NBPtr); ///< Set the ECC exclusion range
+} MEM_NB_BLOCK;
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+MemNCmnInitDefaultsNb (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+VOID
+MemNInitNBDataNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNSwitchDCTNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Dct
+ );
+
+VOID
+MemNSwitchChannelNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Channel
+ );
+
+UINT32
+MemNGetBitFieldNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName
+ );
+
+VOID
+MemNSetBitFieldNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field
+ );
+
+BOOLEAN
+MemNBrdcstCheckNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field
+ );
+
+VOID
+MemNBrdcstSetNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field
+ );
+
+
+UINT32
+MemNGetTrainDlyNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN TRN_DLY_TYPE TrnDly,
+ IN DRBN DrbnVar
+ );
+
+VOID
+MemNSetTrainDlyNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN TRN_DLY_TYPE TrnDly,
+ IN DRBN DrbnVar,
+ IN UINT16 Field
+ );
+
+BOOLEAN
+MemNRankEnabledNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Receiver
+ );
+
+UINT8 MemNGetSocketRelativeChannelNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Dct,
+ IN UINT8 Channel
+ );
+
+BOOLEAN
+MemNGetMCTSysAddrNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Receiver,
+ OUT UINT32 *AddrPtr
+ );
+
+BOOLEAN
+MemNStitchMemoryNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNDisableDCTUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNStartupDCTUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNSendZQCmdNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNSwapBitsUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNTrainPhyFenceNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT32
+MemNcmnGetSetTrainDlyUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 IsSet,
+ IN TRN_DLY_TYPE TrnDly,
+ IN DRBN DrbnVar,
+ IN UINT16 Field
+ );
+
+VOID
+MemNSyncTargetSpeedNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNCPUMemTypingNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNUMAMemTypingNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNSyncAddrMapToAllNodesNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNInitMCTNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT32
+MemRecNGetBitFieldNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName
+ );
+
+VOID
+MemRecNSetBitFieldNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field
+ );
+
+UINT32
+MemRecNGetTrainDlyNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN TRN_DLY_TYPE TrnDly,
+ IN DRBN DrbnVar
+ );
+
+VOID
+MemRecNSetTrainDlyNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN TRN_DLY_TYPE TrnDly,
+ IN DRBN DrbnVar,
+ IN UINT16 Field
+ );
+
+BOOLEAN
+MemRecNAutoConfigNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemRecNPlatformSpecNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemRecNStartupDCTNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemRecNSetMaxLatencyNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT16 MaxRcvEnDly
+ );
+
+VOID
+MemRecNSetDramOdtNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN ODT_MODE OdtMode,
+ IN UINT8 ChipSelect,
+ IN UINT8 TargetCS
+ );
+
+VOID
+MemRecNSendMrsCmdNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+
+VOID
+MemRecNSendZQCmdNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemRecNContReadPatternClientNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ );
+
+AGESA_STATUS
+MemRecNMemInitNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemRecNCPUMemRecTypingNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT32
+MemRecNGetMCTSysAddrNb ( VOID );
+
+UINT32
+MemRecGetVarMtrrHiMsk (
+ IN CPU_LOGICAL_ID *LogicalIdPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+MemNPollBitFieldNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field,
+ IN UINT32 MicroSecond,
+ IN BOOLEAN IfBroadCast
+ );
+
+VOID
+MemNSetEccSymbolSizeNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNDQSTiming3Nb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNRecTrainingFlowNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNRecTrainingFlowClientNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNRecTrainingFlowUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT32
+MemRecNTotalSyncComponentsClientNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemRecNStartupDCTClientNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+
+VOID
+MemRecNPhyVoltageLevelNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+AGESA_STATUS
+MemNTrainingPatternInitNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNGetApproximateWriteDatDelayNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Index,
+ IN OUT UINT8 *Value
+ );
+
+AGESA_STATUS
+MemNTrainingPatternFinalizeNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNFlushPatternNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ );
+
+UINT8
+MemNCSPerDelayNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT8
+MemNMinDataEyeWidthNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT16
+MemNCompareTestPatternNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT16 ByteCount
+ );
+
+UINT16
+MemNInsDlyCompareTestPatternNb (
+ IN MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT16 ByteCount
+ );
+
+BOOLEAN
+MemNSetMTRRUmaRegionUCNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 *BasePtr,
+ IN OUT UINT32 *LimitPtr
+ );
+
+UINT8
+MemNGetMemClkFreqIdUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT16 Speed
+ );
+
+UINT16
+MemNGetMemClkFreqUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 FreqId
+ );
+
+BOOLEAN
+MemNGetPlatformCfgNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNPlatformSpecUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNProgramPlatformSpecNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+INT16
+MemNCalcCDDNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN TRN_DLY_TYPE TrnDlyType1,
+ IN TRN_DLY_TYPE TrnDlyType2,
+ IN BOOLEAN SameDimm,
+ IN BOOLEAN DiffDimm
+ );
+
+VOID
+MemNChangeFrequencyUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNPhyVoltageLevelNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNPhyFenceTrainingUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNEnableSwapIntlvRgnNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Base,
+ IN UINT32 Limit
+ );
+
+VOID
+MemNSetASRSRTNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNPrepareRcvrEnDlySeedNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNChangeNbFrequencyUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNWaitXMemClksNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 MemClkCount
+ );
+
+BOOLEAN
+memNSequenceDDR3Nb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT16
+GetTrainDlyFromHeapNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN TRN_DLY_TYPE TrnDlyType,
+ IN DRBN Drbn
+ );
+
+BOOLEAN
+MemNTrainingFlowUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNSetupHwTrainingEngineUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID* OptParam
+ );
+
+BOOLEAN
+MemNDctCfgSelectUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *Dct
+ );
+
+BOOLEAN
+MemNGetMaxDdrRateUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN VOID *DdrMaxRate
+ );
+
+BOOLEAN
+MemRecNReEnablePhyCompNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+UINT32
+MemRecNcmnGetSetTrainDlyClientNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 IsSet,
+ IN TRN_DLY_TYPE TrnDly,
+ IN DRBN DrbnVar,
+ IN UINT16 Field
+ );
+
+VOID
+MemNSetTxpNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNCalcWrDqDqsEarlyUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+VOID
+MemNGetTrainDlyParmsUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN TRN_DLY_TYPE TrnDly,
+ IN OUT TRN_DLY_PARMS *Parms
+ );
+
+BOOLEAN
+MemNPlatformSpecificFormFactorInitTblDrvNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNChangeNbFrequencyWrapUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 NBPstate
+ );
+
+VOID
+MemNForcePhyToM0Unb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNProgramCycTimingsUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNSetSkewMemClkUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+VOID
+MemNSendMrsCmdUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT8
+MemNGetDramTermTblDrvNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 ChipSel
+ );
+
+UINT8
+MemNGetDynDramTermTblDrvNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 ChipSel
+ );
+
+UINT32
+MemNGetMR2CWLUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT32
+MemNGetMR0CLTblDrvNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT32
+MemNGetMR0WRTblDrvNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNRampUpFrequencyUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNAfterSaveRestoreUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemNAdjustRdDqsDlyOffsetUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *Offset
+ );
+
+VOID
+MemNC6AdjustMSRs (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNC6AndGnbAcpEngineAdjustMSRs (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNInitializeRxEnSeedlessTrainingUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemNTrackRxEnSeedlessRdWrNoWindBLErrorUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemNTrackRxEnSeedlessRdWrSmallWindBLErrorUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemNInitialzeRxEnSeedlessByteLaneErrorUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+VOID
+MemNPhyPowerSavingMPstateUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNChangeMemPStateContextNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN MEM_PSTATE MemPstate
+ );
+
+VOID
+MemNDramPowerMngTimingNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNAllocateNBRegTableNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN NB_REG_TAB_HANDLE Handle
+ );
+
+VOID
+MemTResetRcvFifoUnb (
+ IN OUT struct _MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Dummy
+ );
+
+VOID
+MemRecNContReadPatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ );
+
+VOID
+MemRecNContWritePatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Address,
+ IN UINT8 Pattern[],
+ IN UINT16 ClCount
+ );
+
+UINT16
+MemRecNCompareTestPatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT16 ByteCount
+ );
+
+UINT32
+MemNInPhaseCompareRdDqs2DPatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT16 ByteCount
+ );
+
+UINT32
+MemN180CompareRdDqs2DPatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT16 ByteCount
+ );
+
+VOID
+MemNAgressorContinuousWritesUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 SeedCount,
+ IN BOOLEAN TurnOnInfinite
+ );
+
+UINT32
+MemNGetPrbs2dRdDqsSeedUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 SeedCount
+ );
+
+BOOLEAN
+MemNAdjust2DPhaseMaskBasedOnEccUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+VOID
+MemNRrwPrechargeCmd (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 ChipSelect,
+ IN UINT8 Bank
+ );
+
+VOID
+MemNRrwActivateCmd (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 ChipSelect,
+ IN UINT8 Bank,
+ IN UINT32 RowAddress
+ );
+
+VOID
+MemNStartRdDqs2dVictimContinuousWritesUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 SeedCount
+ );
+
+VOID
+MemNInitializeRdDqs2dVictimChipSelContinuousWritesUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNFinalizeRdDqs2dVictimContinuousWritesUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNInitializeRdDqs2dVictimContinuousWritesUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNAdjustWrDqsBeforeSeedScalingUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *WrDqsBias
+ );
+
+BOOLEAN
+MemNDefaultFamilyHookNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+VOID
+MemNBrdcstSetUnConditionalNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN BIT_FIELD_NAME FieldName,
+ IN UINT32 Field
+ );
+
+BOOLEAN
+MemN2DRdDQSEyeRimSearchUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNContReadPatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ );
+
+VOID
+MemNContWritePatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT32 Address,
+ IN UINT8 Pattern[],
+ IN UINT16 ClCount
+ );
+
+UINT16
+MemNCompareTestPatternUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 Buffer[],
+ IN UINT8 Pattern[],
+ IN UINT16 ByteCount
+ );
+
+UINT32
+MemNGetMemoryWidthUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNModdifyMtrrFixDramModEn (
+ IN UINT32 MsrAddress,
+ IN UINT64 *Value,
+ IN VOID *StdHeader
+ );
+
+BOOLEAN
+MemNAmpVoltageDispUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemNAdjustRdDqsDlyForMaxRdLatUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN OUT VOID *OptParam
+ );
+
+VOID
+MemNSetEccExclusionRangeUnb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+#endif /* _MN_H_ */
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mnpmu.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mnpmu.h
new file mode 100644
index 0000000..2f26c62d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mnpmu.h
@@ -0,0 +1,242 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnpmu.h
+ *
+ * Definitions for PMU support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MNPMU_H_
+#define _MNPMU_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// PMU Firmware Set
+/// PMU firmware can be fragmented. This structure is a set of all fragmented firmware for one run.
+typedef struct {
+ UINT16 SramBaseAddr; ///< SRAM base address
+ UINT16 *ImagePtr; ///< Pointer to firmware image
+ UINT16 ImageSize; ///< Size of firmware image
+} PMU_FIRMWARE_SET;
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+//
+// Upstream mailbox 1 messages
+//
+#define USMSG_DEVINIT 0x00 ///< PMU has completed DevInit
+#define USMSG_TRAINWRLVL 0x01 ///< PMU has completed TSTAGE_WrLvl
+#define USMSG_TRAINRXEN 0x02 ///< PMU has completed TSTAGE_RxEn
+#define USMSG_TRAINRDDQS1D 0x03 ///< PMU has completed TSTAGE_TrainRdDqs1D
+#define USMSG_TRAINWRDQ1D 0x04 ///< PMU has completed TSTAGE_TrainWrDq1D
+#define USMSG_TRAINRD2D 0x05 ///< PMU has completed TSTAGE_TrainRd2D
+#define USMSG_TRAINWR2D 0x06 ///< PMU has completed TSTAGE_TrainWr2D
+#define USMSG_PMUQEMPTY 0x07 ///< PMU has completed all of its SequenceCtl tasks and is in a powergated idle state
+#define USMSG_US2MSGRDY 0x08 ///< PMU is ready to stream a message through US mailbox 2
+#define USMSG_FAIL 0xFF ///< PMU has encountered an error which requires requester to abort waiting for remaining pending upstream messages
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/// Fields on PMU SRAM
+typedef enum {
+ PmuSRAMRangeStart = RegIdLimit, ///< -------------------------- Start of PMU SRAM range
+
+ // DDR3 SRAM message block
+ PmuRevision, ///< Revision Table revision
+ PmuCpuId, ///< CpuId 32-bit CPUID
+ PmuCpuIdHi, ///< CpuId 32-bit CPUID
+ PmuDramType, ///< DramType
+ PmuModuleType, ///< ModuleType
+ PmuRawCard0, ///< RawCard0
+ PmuRawCard1, ///< RawCard1
+ PmuRawCard2, ///< RawCard2
+ PmuRawCard3, ///< RawCard3
+ PmuChipSelect, ///< ChipSelect Specifies which chipselects are present and should be trained. Bit 0 is chip select 0, Bit 1 is
+ ///< chip,select 1, etc. IF Gddr5Mode then ChipSelect[7:1] are ignored.
+ PmuAddrMirror, ///< AddrMirror For each chipselect, specifies which chipselects have address mirroring (BA0 swapped with BA1,
+ ///< A3,swapped with A4, A5 swapped with A6, A7 swapped with A8). This field is used in Ddr3Mode.
+ PmuDimm0Cols, ///< Dimm0Cols Number of device column address bits for Dimm0.
+ PmuDimm1Cols, ///< Dimm1Cols Number of device column address bits for Dimm1.
+ PmuDimm2Cols, ///< Dimm2Cols Number of device column address bits for Dimm2.
+ PmuDimm3Cols, ///< Dimm3Cols Number of device column address bits for Dimm3.
+ PmuDimm0Banks, ///< Dimm0Banks Number of device bank address bits for Dimm0.
+ PmuDimm1Banks, ///< Dimm1Banks Number of device bank address bits for Dimm1.
+ PmuDimm2Banks, ///< Dimm2Banks Number of device bank address bits for Dimm2.
+ PmuDimm3Banks, ///< Dimm3Banks Number of device bank address bits for Dimm3.
+ PmuDimm0Rows, ///< Dimm0Rows Number of device row address bits for Dimm0.
+ PmuDimm1Rows, ///< Dimm1Rows Number of device row address bits for Dimm1.
+ PmuDimm2Rows, ///< Dimm2Rows Number of device row address bits for Dimm2.
+ PmuDimm3Rows, ///< Dimm3Rows Number of device row address bits for Dimm3.
+ PmuPerRankTiming, ///< PerRankTiming 1=The channel is configured to use four timing sources for four independent chipselects. 0=The
+ ///< channel,is configured to use four timing sources for four pairs of chipselects (logical DIMMs).
+ PmuCurrentTemp, ///< CurrentTemp 11-bit temperature in degrees C, with -49C offset, in 0.125C increments, unsigned. See
+ ///< D18F5xA8_x383[GblMaxTemp] in,TN BKDG
+ PmuSequenceCtl, ///< SequenceCtl PMU Sequence Control Word
+ ///< [0] 1=DevInit
+ ///< [1] 1=RxEnDly,Training
+ ///< [2] 1=1D,Rd-Dqs Training
+ ///< [3] 1=1D,Wr-Dq Training
+ ///< [4] 1=2D,Read Training
+ ///< [5] 1=2D,Write Training
+ ///< [15:6] Reserved
+ PmuHdtCtl, ///< HdtCtl
+ PmuCkeSetup, ///< CkeSetup
+ PmuCsOdtSetup, ///< CsOdtSetup
+ PmuAddrCmdSetup, ///< AddrCmdSetup
+ PmuSlowAccessMode, ///< SlowAccessMode SlowAccessMode
+ PmutRP, ///< tRP In units of memclocks. See D18F2x200_dct[3:0]_mp[1:0][Trp] for definition.
+ PmutMRD, ///< tMRD In units of memclocks. See D18F2x220_dct[3:0][Tmrd] for definition.
+ PmutRFC, ///< tRFC In units of memclocks. The maximum value for all DIMMs. See D18F2x208_dct[3:0][Trfc].
+ PmuMR0, ///< MR0
+ PmuMR1, ///< MR1
+ PmuMR2, ///< MR2
+ PmuCD_R_W, ///< CD_R_W Command delay, read to write, any chip select to any other chipselect. Units are memclocks, unsigned integer.
+ PmuCD_R_R, ///< CD_R_R Command delay, read to read, any chip select to any other chipselect. Units are memclocks, unsigned integer.
+ PmuCD_W_W, ///< CD_W_W Command delay, write to write, any chip select to any other chipselect. Units are memclocks, unsigned integer.
+ PmuCD_W_R, ///< CD_W_R Command delay, write to read, any chip select to any other chipselect. Units are memclocks, unsigned integer.
+ PmuCD_R_R_SD, ///< CD_R_R_SD Command delay, read to read, any chip select to another chipselect of same DIMM. Units are memclocks, unsigned integer.
+ PmuCD_W_W_SD, ///< CD_W_W_SD Command delay, write to write, any chip select to another chipselect of same DIMM. Units are memclocks, unsigned integer.
+ PmuTrdrdban_Phy, ///< Trdrdban_Phy In memclocks.
+
+ // GDDR5 SRAM message block
+ PmuCh0Dis, ///< Ch0Dis 1=Disable the lower 32-bits. Used for GDDR5 mode only.
+ PmuCh1Dis, ///< Ch1Dis 1=Disable the upper 32-bits. Used for GDDR5 mode only.
+ PmuInitACTerm, ///< InitACTerm 1=Addr/Cmd term is ZQ. Addr/Cmd term is ZQ/2. Used during DevInit1, for GDDR5 mode only.
+ PmuMR3, ///< MR3
+ PmuMR4, ///< MR4
+ PmuMR5, ///< MR5
+ PmuMR6, ///< MR6
+ PmuMR7, ///< MR7
+ PmuMR8, ///< MR8
+ PmuMR15, ///< MR15
+ PmuMRnum, ///< MRnum SendMrs Specifies the MR number for a single MRS command. Write data is one of MR0 to MR15 in this table.
+ ///< is, chip select 1, etc..IF Gddr5Mode then ChipSelect[7:1] are ignored.
+
+ PmuSRAMRangeEnd ///< -------------------------- Start of PMU SRAM range
+} REG_BF_NAME;
+
+/// PMU SRAM field location
+typedef struct {
+ UINT32 LoBit: 6; ///< Low bit of the bit field
+ UINT32 HiBit: 6; ///< High bit of the bit field
+ UINT32 RegOffset: 10; ///< Register that the bit field is on
+ UINT32 Reserved: 9; ///< Reserved
+ UINT32 Linked: 1; ///< 1: The bit field has high bits defined in the very next Bf identifier
+ ///< 0: The bit field has no further extension
+} PMU_SRAM_ADDR;
+
+/**
+ PMU_SRAM (TableName, BfIndex, RegOffset, Hi, Lo)
+
+ @param[in] TableName
+ @param[in] BfIndex
+ @param[in] RegOffset
+ @param[in] Hi
+ @param[in] Lo
+
+ @return PMU_SRAM Encrypted PMU SRAM field location
+--*/
+#define PMU_SRAM(TableName, BfIndex, RegOffset, Hi, Lo) \
+ TableName[BfIndex] = ( \
+ ((UINT32) RegOffset << 12) | ( \
+ (Hi > Lo) ? (\
+ (((UINT32) Hi << 6) | (UINT32) Lo) \
+ ) : ( \
+ (((UINT32) Lo << 6) | (UINT32) Hi) \
+ ) \
+ ) \
+ )
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+VOID
+MemNPmuResetNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemNLoadPmuFirmwareNb (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN PMU_FIRMWARE_SET *FirmwareSet,
+ IN UINT16 NumberOfEntries
+ );
+
+VOID
+MemNStartPmuNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemNPendOnPmuCompletionNb (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT32
+MemNCalcMR0 (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+UINT32
+MemNCalcMR1 (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 ChipSel
+ );
+
+UINT32
+MemNCalcMR2 (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 ChipSel
+ );
+
+#endif /* _MNPMU_H_ */
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mnreg.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mnreg.h
new file mode 100644
index 0000000..6b8cf8d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mnreg.h
@@ -0,0 +1,533 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mnreg.h
+ *
+ * Definitions for whole register tokens
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MNREG_H_
+#define _MNREG_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// Registers used in memory initialization
+typedef enum {
+ // NB_REG identifiers
+ NbRegRangeStart = BFEndOfList, ///< -------------------------- Start of NB_REG range
+ RegDramBase0, ///< Register DramBase0
+ RegDramLimit0, ///< Register DramLimit0
+ RegDramBaseHi0, ///< Register DramBaseHi0
+ RegDramLimitHi0, ///< Register DramLimitHi0
+ RegDramBase1, ///< Register DramBase1
+ RegDramLimit1, ///< Register DramLimit1
+ RegDramBaseHi1, ///< Register DramBaseHi1
+ RegDramLimitHi1, ///< Register DramLimitHi1
+ RegDramBase2, ///< Register DramBase2
+ RegDramLimit2, ///< Register DramLimit2
+ RegDramBaseHi2, ///< Register DramBaseHi2
+ RegDramLimitHi2, ///< Register DramLimitHi2
+ RegDramBase3, ///< Register DramBase3
+ RegDramLimit3, ///< Register DramLimit3
+ RegDramBaseHi3, ///< Register DramBaseHi3
+ RegDramLimitHi3, ///< Register DramLimitHi3
+ RegDramBase4, ///< Register DramBase4
+ RegDramLimit4, ///< Register DramLimit4
+ RegDramBaseHi4, ///< Register DramBaseHi4
+ RegDramLimitHi4, ///< Register DramLimitHi4
+ RegDramBase5, ///< Register DramBase5
+ RegDramLimit5, ///< Register DramLimit5
+ RegDramBaseHi5, ///< Register DramBaseHi5
+ RegDramLimitHi5, ///< Register DramLimitHi5
+ RegDramBase6, ///< Register DramBase6
+ RegDramLimit6, ///< Register DramLimit6
+ RegDramBaseHi6, ///< Register DramBaseHi6
+ RegDramLimitHi6, ///< Register DramLimitHi6
+ RegDramBase7, ///< Register DramBase7
+ RegDramLimit7, ///< Register DramLimit7
+ RegDramBaseHi7, ///< Register DramBaseHi7
+ RegDramLimitHi7, ///< Register DramLimitHi7
+
+ RegDramHoleAddr, ///< Register DramHoleAddr
+ RegDctCfgSel, ///< Register DctCfgSel
+ RegDramBaseSysAddr, ///< Register DramBaseSysAddr
+ RegDramLimitSysAddr, ///< Register DramLimitSysAddr
+
+ RegDramCtlrBase0, ///< Register DramCtlrBase0
+ RegDramCtlrBase1, ///< Register DramCtlrBase1
+ RegDramCtlrBase2, ///< Register DramCtlrBase2
+ RegDramCtlrBase3, ///< Register DramCtlrBase3
+
+ RegDramCtlrLimit0, ///< Register DramCtlrLimit0
+ RegDramCtlrLimit1, ///< Register DramCtlrLimit1
+ RegDramCtlrLimit2, ///< Register DramCtlrLimit2
+ RegDramCtlrLimit3, ///< Register DramCtlrLimit3
+
+ RegDctHiAddrOffset0, ///< Register DctHiAddrOffset0
+ RegDctHiAddrOffset1, ///< Register DctHiAddrOffset1
+ RegDctHiAddrOffset2, ///< Register DctHiAddrOffset2
+ RegDctHiAddrOffset3, ///< Register DctHiAddrOffset3
+
+ RegDramCtl, ///< Register DramCtl
+ RegDramInit, ///< Register DramInit
+ RegDramBankAddr, ///< Register DramBankAddr
+ RegDramMRS, ///< Register DramMRS
+ RegDramTmgLo, ///< Register DramTmgLo
+ RegDramTmgHi, ///< Register DramTmgHi
+ RegDramConfigLo, ///< Register DramConfigLo
+ RegDramConfigHi, ///< Register DramConfigHi
+
+ RegDctAddlOffset, ///< Register DctAddlOffset
+ RegDctAddlData, ///< Register DctAddlData
+ RegDctAddlOffsetBrdcst, ///< Register DctAddlOffset for broadcast
+ RegDctAddlDataBrdcst, ///< Register DctAddlData for broadcast
+
+ RegDctTempThrottle, ///< Register DctTempThrottle
+ RegDramCtlrMisc2, ///< Register DramCtlrMisc2
+ RegDramCtlrMisc3, ///< Register DramCtlrMisc3
+ RegTraceBufferCtlr, ///< Register TraceBufferCtlr
+ RegSwapIntLvRgn, ///< Register SwapIntLvRgn
+ RegMctCfgLo, ///< Register MctCfgLo
+ RegMctCfgHi, ///< Register MctCfgHi
+ RegExtMctCfgLo, ///< Register ExtMctCfgLo
+ RegExtMctCfgHi, ///< Register ExtMctCfgHi
+ RegDramNbPstate, ///< Register DramNbPstate
+
+ RegGmcToDctCtl0, ///< Register GmcToDctCtl0
+ RegGmcToDctCtl1, ///< Register GmcToDctCtl1
+ RegGmcToDctCtl2, ///< Register GmcToDctCtl2
+ RegGmcToDctFifoCfg1, ///< Register GMC to DCT FIFO Config 1
+
+ RegCSBaseAddr0, ///< Register CSBaseAddr0
+ RegCSBaseAddr1, ///< Register CSBaseAddr1
+ RegCSBaseAddr2, ///< Register CSBaseAddr2
+ RegCSBaseAddr3, ///< Register CSBaseAddr3
+ RegCSMask0, ///< Register CSMask0
+ RegCSMask1, ///< Register CSMask1
+ RegDramCtlrSelLo, ///< Register DramCtlrSelLo
+ RegDramCtlrSelHi, ///< Register DramCtlrSelHi
+
+ RegDdr3DramTmg0, ///< Register Ddr3DramTmg0
+ RegDdr3DramTmg1, ///< Register Ddr3DramTmg1
+ RegDdr3DramTmg2, ///< Register Ddr3DramTmg2
+ RegDdr3DramTmg3, ///< Register Ddr3DramTmg3
+ RegDdr3DramTmg4, ///< Register Ddr3DramTmg4
+ RegDdr3DramTmg5, ///< Register Ddr3DramTmg5
+ RegDdr3DramTmg6, ///< Register Ddr3DramTmg6
+ RegDdr3DramTmg7, ///< Register Ddr3DramTmg7
+ RegDdr3DramTmg8, ///< Register Ddr3DramTmg8
+ RegDdr3DramTmg9, ///< Register Ddr3DramTmg9
+ RegDdr3DramTmg10, ///< Register Ddr3DramTmg10
+ RegPhyRODTCSLow , ///< Register RegPhyRODTCSLow
+ RegPhyRODTCSHigh, ///< Register RegPhyRODTCSHigh
+ RegPhyWODTCSLow , ///< Register RegPhyWODTCSLow
+ RegPhyWODTCSHigh, ///< Register RegPhyWODTCSHigh
+ RegDdr3DramPwrMng0, ///< Register Ddr3DramPwrMng0
+ RegDdr3DramPwrMng1, ///< Register Ddr3DramPwrMng1
+ RegDdr3DramOdtCtl, ///< Register Ddr3DramOdtClt
+ RegMemPsCtlSts, ///< Register MemPsCtlSts
+ RegMrsBuf0, ///< Register MRS Buffer 0
+ RegMrsBuf1, ///< Register MRS Buffer 1
+
+ RegDramLpbkTrnCtl, ///< Register DramLpbkTrnCtl
+ RegTargetABase, ///< Register TargetABase
+ RegDramCmd0, ///< Register DramCmd0
+ RegDramCmd1, ///< Register DramCmd1
+ RegDramCmd2, ///< Register DramCmd2
+ RegDramPRBS, ///< Register DramPRBS
+ RegDramStatus1, ///< Register DramStatus1
+ RegDramDqMaskLo, ///< Register DramDqMaskLo
+ RegDramDqMaskHi, ///< Register DramDqMaskHi
+ RegDramEccMask, ///< Register DramEccMask
+ RegDQErrLo, ///< Register DQErrLo
+ RegDQErrHi, ///< Register DQErrHi
+
+ RegGddr5DramTmg0, ///< Register Gddr5DramTmg0
+ RegGddr5DramTmg1, ///< Register Gddr5DramTmg1
+ RegGddr5DramTmg2, ///< Register Gddr5DramTmg2
+ RegGddr5DramTmg3, ///< Register Gddr5DramTmg3
+ RegGddr5DramTmg4, ///< Register Gddr5DramTmg4
+ RegGddr5DramTmg5, ///< Register Gddr5DramTmg5
+ RegGddr5DramTmg6, ///< Register Gddr5DramTmg6
+ RegGddr5DramTmg7, ///< Register Gddr5DramTmg7
+ RegGddr5DramTmg8, ///< Register Gddr5DramTmg8
+ RegGddr5DramPowerMng0, ///< Register Gddr5DramPowerMng0
+ RegGddr5DramPowerMng1, ///< Register Gddr5DramPowerMng1
+ RegGddr5DramCtrl0, ///< Register Gddr5DramCtrl0
+ RegGddr5DramNbPstate, ///< Register Gddr5DramNbPstate
+
+ RegNbCap2, ///< Register NbCap2
+ RegNbPstateCtl, ///< Register NbPstateCtl
+ RegNbPstateStatus, ///< Register NbPstateStatus
+ RegNbPstate0, ///< Register NB Pstate 0
+ RegNbPstate1, ///< Register NB Pstate 1
+ RegNbPstate2, ///< Register NB Pstate 2
+ RegNbPstate3, ///< Register NB Pstate 3
+ RegNbFusionCfg, ///< Register NB Fusion Configuration
+ RegCUPwrStsLo, ///< Register Compute Unit Power Status Low
+ RegCUPwrStsHi, ///< Register Compute Unit Power Status High
+
+ RegCkeToCsMap, ///< Register Dram CKE to CS Map
+
+ RegMcaNbCtl, ///< Register MCA NB Control
+ RegMcaNbCfg, ///< Register MCA NB Configuration
+ RegScrubRateCtl, ///< Register Scrub Rate Control
+ RegDramScrubAddrLo, ///< Register DRAM Scrub Address Low
+ RegDramScrubAddrHi, ///< Register DRAM Scrub Address High
+ RegNbCfg1Lo, ///< Register NB Configuration 1 Low
+ RegCpuid, ///< Register CPUID Family/Model/Stepping
+ RegExtMcaNbCfg, ///< Register Extended NB MCA Configuration
+
+ RegReserved01, ///< Reserved
+ RegReserved02, ///< Reserved
+ RegReserved03, ///< Reserved
+ RegReserved04, ///< Reserved
+ RegReserved05, ///< Reserved
+
+ NbRegRangeEnd, ///< -------------------------- End of NB_REG range
+
+ // DCT_PHY_REG identifiers
+ DctPhyRegRangeStart, ///< -------------------------- Start of DCT_PHY_REG range
+ RegRxCtl1, ///< Register RxCtl1
+ RegRdPtrInitVal, ///< Register RdPtrInitVal
+ RegDataRdPtrInitVal, ///< Register DataRdPtrInitVal
+ RegEdcRdPtrInitVal, ///< Register EdcRdPtrInitVal
+ RegDataRdPtrOffset, ///< Register DataRdPtrOffset
+
+ RegPmuRst, ///< Register PmuRst
+ RegPwrStateCmd, ///< Register Power State Command
+ RegDsMbMsg, ///< Register DS Mailbox Message
+ RegDsMbProtocol, ///< Register DS Mailbox Protocol
+ RegMbProtocolShadow, ///< Register Mailbox Protocol Shadow
+ RegUsMbMsg, ///< Register US Mailbox Message
+ RegUsMbProtocol, ///< Register US Mailbox Protocol
+ RegUsMb2Msg, ///< Register US Mailbox 2 Message
+ RegUsMb2Protocol, ///< Register US Mailbox 2 Protocol
+ RegSramMsgBlk, ///< Register SRAM Message Block
+ RegGlobalCtl, ///< Register Global Control
+ RegGlobalCtlSlaveAbyte, ///< Register Global Control Slave ABYTE
+ RegGlobalCtlSlaveDbyte, ///< Register Global Control Slave DBYTE
+ RegGlobalCtlSlaveAbit, ///< Register Global Control Slave ABIT
+ RegCalMisc2, ///< Register Cal Misc 2
+ RegPllMemPs0, ///< Register PLL Mem Pstate 0
+ RegPllMemPs1, ///< Register PLL Mem Pstate 1
+ RegPmuClkDiv, ///< Register PMU Clock divider
+ RegPllRegWaitTime, ///< Register PllRegWaitTime
+ RegPllLockTime, ///< Register PllRegLockTime
+ RegPhyCADCtl, ///< Register Phy CAD control
+ RegMemResetCtl, ///< Register Mem reset control
+ RegDisCal, ///< Register Disable calibration
+
+ RegCadTxSlewRate, ///< Register CAD Tx Slew Rate
+ RegDataTxSlewRate, ///< Register DATA Tx Slew Rate
+
+ RegAcsmCtrl13, ///< Register AcsmCtrl13
+ RegX8DevIDCtl, ///< Register X8 DeviceID Control
+
+ RegTxImpedance, ///< Register for all TX impedance
+ RegCadTxImpedance, ///< Register CAD Tx Impedance
+ RegDataTxImpedance, ///< Register Data Tx Impedance
+ RegDataRxImpedance, ///< Register Data Rx Impedance
+
+ RegAcsmOdtCtrl0, ///< Register ACSM ODT Ctrl
+ RegAcsmOdtCtrl1, ///< Register ACSM ODT Ctrl
+ RegAcsmOdtCtrl2, ///< Register ACSM ODT Ctrl
+ RegAcsmOdtCtrl3, ///< Register ACSM ODT Ctrl
+ RegAcsmOdtCtrl4, ///< Register ACSM ODT Ctrl
+ RegAcsmOdtCtrl5, ///< Register ACSM ODT Ctrl
+ RegAcsmOdtCtrl6, ///< Register ACSM ODT Ctrl
+ RegAcsmOdtCtrl7, ///< Register ACSM ODT Ctrl
+
+ RegVrefByteAbyte, ///< Register Vref Byte
+ RegVrefByteDbyte, ///< Register Vref Byte
+ RegVrefByteMaster, ///< Register Vref Byte
+
+ RegProcOdtTmg, ///< Register Proc ODT Timing
+ RegPhyClkCtl, ///< Register Phy clock control
+
+ RegTxDly, ///< Register TX delay
+ RegDataRxDly, ///< Register Data Rx Delay
+ RegDataTxDly, ///< Register Data Tx Delay
+ RegDataTxEqHiImp, ///< Register Data Tx EQ Hi Impedence
+ RegDataTxEqLoImp, ///< Register Data Tx EQ Lo Impedence
+ RegDataTxEqBoostImp, ///< Register Data Tx EQ Boost Impedence
+
+ DctPhyRegRangeEnd, ///< -------------------------- End of DCT_PHY_REG range
+
+ RegIdLimit ///< Total number of register identifiers
+
+} REG_BF_NAME;
+
+/// Bit field location
+typedef struct {
+ UINT32 LoBit: 6; ///< Low bit of the bit field
+ UINT32 HiBit: 6; ///< High bit of the bit field
+ UINT32 RegIndex: 12; ///< Register that the bit field is on
+ UINT32 Reserved: 7; ///< Reserved
+ UINT32 Linked: 1; ///< 1: The bit field has high bits defined in the very next Bf identifier
+ ///< 0: The bit field has no further extension
+} BF_LOCATION;
+
+/**
+ REG_DEF(TableName, RegIndex, Addr)
+
+ @param[in] TableName
+ @param[in] RegIndex
+ @param[in] Addr
+
+ @return REG_BF_ENC Access params encrypted in REG_BF_ENC format.
+--*/
+#define REG_DEF(TableName, RegIndex, Addr) \
+ TableName[RegIndex] = Addr
+
+/**
+ _BF_DEF(TableName, RegIndex, BfIndex, Hi, Lo)
+
+ @param[in] TableName
+ @param[in] RegIndex
+ @param[in] BfIndex
+ @param[in] Hi
+ @param[in] Lo
+
+ @return REG_BF_ENC Access params encrypted in REG_BF_ENC format.
+--*/
+#define _BF_DEF(TableName, RegIndex, BfIndex, Hi, Lo) \
+ TableName[BfIndex] = ( \
+ ((UINT32) RegIndex << 12) | ( \
+ (Hi > Lo) ? (\
+ (((UINT32) Hi << 6) | (UINT32) Lo) \
+ ) : ( \
+ (((UINT32) Lo << 6) | (UINT32) Hi) \
+ ) \
+ ) \
+ )
+
+/**
+ LINK_BF(TableName, LowerBfIndex, HigherBfIndex):
+ This is one way link: any write to LowerBfIndex would write to HigherBfIndex,
+ but NOT the other way around.
+ Requirement: LowerBfIndex must be declared *right* before HigherBfIndex.
+
+ @param[in] TableName
+ @param[in] LowerBfIndex
+ @param[in] HigherBfIndex
+
+ @return REG_BF_ENC Access params encrypted in REG_BF_ENC format.
+--*/
+#define LINK_BF(TableName, LowerBfIndex, HigherBfIndex) { \
+ ASSERT ((LowerBfIndex < BFEndOfList) || (LowerBfIndex > RegIdLimit)); \
+ ASSERT ((HigherBfIndex < BFEndOfList) || (HigherBfIndex > RegIdLimit)); \
+ ASSERT (LowerBfIndex == (HigherBfIndex - 1)) ; \
+ TableName[LowerBfIndex] |= ((UINT32) 1) << 31; \
+}
+
+/*----------------------------------------------------------------------------
+ * CHIP TO PAD TRANSLATION
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// Pad group names
+typedef enum {
+ PAD_ALL = 0, ///< broadcast to all pads
+ PAD_CKE, ///< pad CKE
+ PAD_ADDR_CMD, ///< pad ADDR_CMD
+ PAD_CLK, ///< pad CLK
+ PAD_CS, ///< pad CS
+ PAD_ODT, ///< pad ODT
+ PAD_DQ_L, ///< pad DQ_L
+ PAD_DQ_H, ///< pad DQ_H
+ PAD_DQS_DM, ///< pad DQS_DM
+ PAD_DQS_H, ///< pad DQS_H
+ PAD_PROC_ODT, ///< pad PROC_ODT
+ PAD_DQ, ///< pad DQ
+ PAD_DQS, ///< pad DQS
+} PAD_NAME;
+
+#define MEMCKE0 PAD_CKE
+#define MEMADD0 PAD_ADDR_CMD
+#define MEMBANK0 PAD_ADDR_CMD
+#define MEMPAR0 PAD_ADDR_CMD
+#define MEMCLK0_L PAD_CLK
+#define MEMCLK0_H PAD_CLK
+#define MEMCS0_L PAD_CS
+#define MEMCAS0_L PAD_ADDR_CMD
+#define MEMWE0_L PAD_ADDR_CMD
+#define MEMRAS0_L PAD_ADDR_CMD
+#define MEMODT0 PAD_ODT
+#define MEMDQ_L PAD_DQ_L
+#define MEMDQ_H PAD_DQ_H
+#define MEMDQSDM PAD_DQS_DM
+#define MEMDQS_H PAD_DQS_H
+#define MEMDQ PAD_DQ
+#define MEMDQS PAD_DQS
+
+/// DDR Chip to pad entry
+typedef struct {
+ UINT16 PadName: 4; ///< Pad name
+ UINT16 Instance: 4; ///< Pad instance
+ UINT16 Chiplet: 4; ///< Chiplet number
+ UINT8 Group: 4; ///< Group number
+ UINT8 PadNum: 4; ///< Pad number
+} DDR_CHIP_TO_PAD_ENTRY;
+
+/*----------------------------------------------------------------------------
+ * BIT FIELD TOKEN ENCODING
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// Sub-structure used to parse a BF token
+typedef struct {
+ UINT32 Index: 12; ///< Index into NBRegTable table
+ UINT32 Reserved: 4; ///< Reserved
+ UINT32 PadName: 5; ///< ie CKE, ODT, ADDR,...
+ UINT32 PadIdxPlus1: 5; ///< Pad instance of a certain type
+ UINT32 DLNPlus1: 4; ///< DIMM/DLL/NBPs number
+ UINT32 MemPsPlus1: 2; ///< MemPs number
+} BF_TOKEN_PARSE;
+
+/// Bit field name encoding
+typedef union {
+ BIT_FIELD_NAME FieldName; ///< BF token
+ BF_TOKEN_PARSE Parse; ///< BF token parse
+} BF_NAME_ENC;
+
+
+/**
+ SW_BC_DIS(BfIndex)
+ Specifies that set function to not attempt SW broadcast
+
+ @param[in] BfIndex
+
+ @return REG_BF_ENC Access params encrypted in REG_BF_ENC format.
+--*/
+#define SW_BC_DIS(BfIndex) ((BfIndex) | (0xFFFF0000ul))
+
+/**
+ PER_MEM_PS(p, BfIndex)
+ Specifies that set function to only broadcast to Mem Pstate p of bit field BfIndex
+
+ @param[in] p
+ @param[in] BfIndex
+
+ @return REG_BF_ENC Access params encrypted in REG_BF_ENC format.
+--*/
+#define PER_MEM_PS(p, BfIndex) ((BfIndex) | ((UINT32) (((p) + 1) & 0x3) << 30))
+#define ALL_MEM_PS 2
+
+/**
+ PER_NB_PS(p, BfIndex)
+ Specifies that set function to only broadcast to NB Pstate p of bit field BfIndex
+
+ @param[in] p
+ @param[in] BfIndex
+
+ @return REG_BF_ENC Access params encrypted in REG_BF_ENC format.
+--*/
+#define PER_NB_PS(p, BfIndex) ((BfIndex) | ((UINT32) (((p) + 1) & 0xF) << 26))
+#define NB_PS_PMU 8
+#define ALL_NB_PS 0xFF
+
+/**
+ PER_DIMM(p, BfIndex)
+ Specifies that set function to only broadcast to NB Pstate p of bit field BfIndex
+
+ @param[in] d
+ @param[in] BfIndex
+
+ @return REG_BF_ENC Access params encrypted in REG_BF_ENC format.
+--*/
+#define PER_DIMM(d, BfIndex) ((BfIndex) | ((UINT32) (((d) + 1) & 0xF) << 26))
+#ifndef ALL_DIMMS
+ #define ALL_DIMMS 0xFF
+#endif
+
+
+/**
+ PER_CAD_PAD(t, i, BfIndex)
+ Specifies that set function to only broadcast a certain pad (ie MEMCKE[3])
+
+ @param[in] t - pad type (ie MEMCKE)
+ @param[in] i - pad index (ie 3)
+ @param[in] BfIndex
+
+ @return REG_BF_ENC Access params encrypted in REG_BF_ENC format.
+--*/
+#define PER_CAD_PAD(t, i, BfIndex) ((BfIndex) | ((UINT32) (t) << 16) | ((UINT32) (((i) + 1) & 0x1F) << 21))
+#define ALL_PADS 0xFF
+
+/**
+ PER_DATA_BYTE(t, b, BfIndex)
+ Specifies that set function to only broadcast a certain data pad (ie DQ byte 3)
+
+ @param[in] t - data pin type (ie DQ)
+ @param[in] b - data byte (ie byte 3)
+ @param[in] BfIndex
+
+ @return REG_BF_ENC Access params encrypted in REG_BF_ENC format.
+--*/
+#define PER_DATA_BYTE(t, b, BfIndex) ((BfIndex) | ((UINT32) (t) << 16) | ((UINT32) (((b) + 1) & 0x1F) << 21))
+#define ECC_BYTE 8
+#define ALL_BYTES 0xFF
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif /* _MNREG_H_ */
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mp.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mp.h
new file mode 100644
index 0000000..c295488
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mp.h
@@ -0,0 +1,523 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mp.h
+ *
+ * Platform Specific common header file
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+#ifndef _MP_H_
+#define _MP_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/// Type of an entry for Dram Term table
+typedef struct {
+ UINT32 Speed; ///< BitMap for the supported speed
+ UINT8 Dimms; ///< BitMap for supported number of dimm
+ UINT8 QR_Dimms; ///< BitMap for supported number of QR dimm
+ UINT8 DramTerm; ///< DramTerm value
+ UINT8 QR_DramTerm; ///< DramTerm value for QR
+ UINT8 DynamicDramTerm; ///< Dynamic DramTerm
+} DRAM_TERM_ENTRY;
+
+/// Type of an entry for POR speed limit table
+typedef struct {
+ UINT16 DIMMRankType; ///< Bitmap of Ranks
+ UINT8 Dimms; ///< Number of dimm
+ UINT16 SpeedLimit_1_5V; ///< POR speed limit for 1.5V
+ UINT16 SpeedLimit_1_35V; ///< POR speed limit for 1.35V
+ UINT16 SpeedLimit_1_25V; ///< POR speed limit for 1.25V
+} POR_SPEED_LIMIT;
+
+/// UDIMM&RDIMM Max. Frequency
+typedef union {
+ struct { ///< PSCFG_MAXFREQ_ENTRY
+ UINT8 DimmPerCh; ///< Dimm slot per chanel
+ UINT16 Dimms:4; ///< Number of Dimms on a channel
+ UINT16 SR:4; ///< Number of single-rank Dimm
+ UINT16 DR:4; ///< Number of dual-rank Dimm
+ UINT16 QR:4; ///< Number of quad-rank Dimm
+ UINT16 Speed1_5V; ///< Speed limit with voltage 1.5V
+ UINT16 Speed1_35V; ///< Speed limit with voltage 1.35V
+ UINT16 Speed1_25V; ///< Speed limit with voltage 1.25V
+ } _MAXFREQ_ENTRY;
+ struct {
+ UINT8 DimmSlotPerCh;
+ UINT16 CDN; ///< Condition
+ UINT16 Speed[3]; ///< Speed limit
+ } MAXFREQ_ENTRY;
+} PSCFG_MAXFREQ_ENTRY;
+
+/// LRDIMM Max. Frequency
+typedef union {
+ struct { ///< PSCFG_LR_MAXFREQ_ENTRY
+ UINT8 DimmPerCh; ///< Dimm slot per chanel
+ UINT16 Dimms:4; ///< Number of Dimms on a channel
+ UINT16 LR:12; ///< Number of LR-DIMM
+ UINT16 Speed1_5V; ///< Speed limit with voltage 1.5V
+ UINT16 Speed1_35V; ///< Speed limit with voltage 1.35V
+ UINT16 Speed1_25V; ///< Speed limit with voltage 1.25V
+ } _LR_MAXFREQ_ENTRY;
+ struct {
+ UINT8 DimmSlotPerCh;
+ UINT16 CDN;
+ UINT16 Speed[3];
+ } LR_MAXFREQ_ENTRY;
+} PSCFG_LR_MAXFREQ_ENTRY;
+
+/// UDIMM&RDIMM RttNom and RttWr
+typedef struct {
+ UINT64 DimmPerCh:8; ///< Dimm slot per chanel
+ UINT64 DDRrate:32; ///< Bitmap of DDR rate
+ UINT64 VDDIO:4; ///< Bitmap of VDDIO
+ UINT64 Dimm0:4; ///< Bitmap of rank type of Dimm0
+ UINT64 Dimm1:4; ///< Bitmap of rank type of Dimm1
+ UINT64 Dimm2:4; ///< Bitmap of rank type of Dimm2
+ UINT64 Dimm:4; ///< Bitmap of rank type of Dimm
+ UINT64 Rank:4; ///< Bitmap of rank
+ UINT8 RttNom:3; ///< Dram term
+ UINT8 RttWr:5; ///< Dynamic dram term
+} PSCFG_RTT_ENTRY;
+
+/// LRDIMM RttNom and RttWr
+typedef struct {
+ UINT64 DimmPerCh:8; ///< Dimm slot per chanel
+ UINT64 DDRrate:32; ///< Bitmap of DDR rate
+ UINT64 VDDIO:4; ///< Bitmap of VDDIO
+ UINT64 Dimm0:4; ///< Dimm0 population
+ UINT64 Dimm1:4; ///< Dimm1 population
+ UINT64 Dimm2:12; ///< Dimm2 population
+ UINT8 RttNom:3; ///< Dram term
+ UINT8 RttWr:5; ///< Dynamic dram term
+} PSCFG_LR_RTT_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM ODT pattern OF 1 DPC
+typedef struct {
+ UINT16 Dimm0; ///< Bitmap of dimm0 rank type or dimm0 population of LRDIMM
+ UINT32 RdODTCSHigh; ///< RdODTCSHigh
+ UINT32 RdODTCSLow; ///< RdODTCSLow
+ UINT32 WrODTCSHigh; ///< WrODTCSHigh
+ UINT32 WrODTCSLow; ///< WrODTCSLow
+} PSCFG_1D_ODTPAT_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM ODT pattern OF 2 DPC
+typedef struct {
+ UINT16 Dimm0:4; ///< Bitmap of dimm0 rank type or dimm0 population of LRDIMM
+ UINT16 Dimm1:12; ///< Bitmap of dimm1 rank type or dimm1 population of LRDIMM
+ UINT32 RdODTCSHigh; ///< RdODTCSHigh
+ UINT32 RdODTCSLow; ///< RdODTCSLow
+ UINT32 WrODTCSHigh; ///< WrODTCSHigh
+ UINT32 WrODTCSLow; ///< WrODTCSLow
+} PSCFG_2D_ODTPAT_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM ODT pattern OF 3 DPC
+typedef struct {
+ UINT16 Dimm0:4; ///< Bitmap of dimm0 rank type or dimm0 population of LRDIMM
+ UINT16 Dimm1:4; ///< Bitmap of dimm1 rank type or dimm1 population of LRDIMM
+ UINT16 Dimm2:8; ///< Bitmap of dimm2 rank type or dimm2 population of LRDIMM
+ UINT32 RdODTCSHigh; ///< RdODTCSHigh
+ UINT32 RdODTCSLow; ///< RdODTCSLow
+ UINT32 WrODTCSHigh; ///< WrODTCSHigh
+ UINT32 WrODTCSLow; ///< WrODTCSLow
+} PSCFG_3D_ODTPAT_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM SlowMode, AddrTmgCtl and ODC
+typedef struct {
+ UINT64 DimmPerCh:8; ///< Dimm slot per channel
+ UINT64 DDRrate:32; ///< Bitmap of DDR rate
+ UINT64 VDDIO:4; ///< Bitmap of VDDIO
+ UINT64 Dimm0:4; ///< Bitmap of dimm0 rank type or dimm0 population of LRDIMM
+ UINT64 Dimm1:4; ///< Bitmap of dimm1 rank type or dimm1 population of LRDIMM
+ UINT64 Dimm2:11; ///< Bitmap of dimm2 rank type or dimm2 population of LRDIMM
+ UINT64 SlowMode:1; ///< SlowMode
+ UINT32 AddTmgCtl; ///< AddTmgCtl
+ UINT32 ODC; ///< ODC
+ UINT8 POdtOff; ///< POdtOff
+} PSCFG_SAO_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM 2D training config entry
+typedef struct {
+ UINT64 DimmPerCh:8; ///< Dimm per channel
+ UINT64 DDRrate:32; ///< Bitmap of DDR rate
+ UINT64 VDDIO:4; ///< Bitmap of VDDIO
+ UINT64 Dimm0:4; ///< Bitmap of dimm0 rank type or dimm0 population of LRDIMM
+ UINT64 Dimm1:4; ///< Bitmap of dimm1 rank type or dimm1 population of LRDIMM
+ UINT64 Dimm2:11; ///< Bitmap of dimm2 rank type or dimm2 population of LRDIMM
+ UINT64 Enable2D:1; ///< SlowMode
+} PSCFG_S2D_ENTRY;
+
+/// UDIMM&RDIMM MR0[WR]
+typedef struct {
+ UINT8 Timing; ///< Fn2_22C_dct[1:0][Twr]
+ UINT8 Value; ///< MR0[WR] : bit0 - bit2 available
+} PSCFG_MR0WR_ENTRY;
+
+/// UDIMM&RDIMM MR0[CL]
+typedef struct {
+ UINT8 Timing; ///< Fn2_200_dct[1:0][Tcl]
+ UINT8 Value:3; ///< MR0[CL] : bit0 - bit2 CL[3:1]
+ UINT8 Value1:5; ///< MR0[CL] : bit3 CL[0]
+} PSCFG_MR0CL_ENTRY;
+
+/// UDIMM&RDIMM MR2[IBT]
+typedef struct {
+ UINT64 DimmPerCh:4; ///< Dimm per channel
+ UINT64 DDRrate:32; ///< Bitmap of DDR rate
+ UINT64 VDDIO:4; ///< Bitmap of VDDIO
+ UINT64 Dimm0:4; ///< Bitmap of dimm0 rank type
+ UINT64 Dimm1:4; ///< Bitmap of dimm1 rank type
+ UINT64 Dimm2:4; ///< Bitmap of dimm2 rank type
+ UINT64 Dimm:4; ///< Bitmap of rank type of Dimm
+ UINT64 NumOfReg:4; ///< Number of registers
+ UINT64 IBT:4; ///< MR2[IBT] value
+} PSCFG_MR2IBT_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM Operating Speed
+typedef struct {
+ UINT32 DDRrate; ///< Bitmap of DDR rate
+ UINT8 OPSPD; ///< RC10[OperatingSpeed]
+} PSCFG_OPSPD_ENTRY;
+
+/// LRDIMM IBT
+typedef struct {
+ UINT64 DimmPerCh:4; ///< Dimm per channel
+ UINT64 DDRrate:32; ///< Bitmap of DDR rate
+ UINT64 VDDIO:4; ///< Bitmap of VDDIO
+ UINT64 Dimm0:4; ///< Dimm0 population
+ UINT64 Dimm1:4; ///< Dimm1 population
+ UINT64 Dimm2:4; ///< Dimm2 population
+ UINT64 F0RC8:3; ///< F0RC8
+ UINT64 F1RC0:3; ///< F1RC0
+ UINT64 F1RC1:3; ///< F1RC1
+ UINT64 F1RC2:3; ///< F1RC2
+} PSCFG_L_IBT_ENTRY;
+
+/// LRDIMM F0RC13[NumPhysicalRanks]
+typedef struct {
+ UINT8 NumRanks:3; ///< NumRanks
+ UINT8 NumPhyRanks:5; ///< NumPhyRanks
+} PSCFG_L_NPR_ENTRY;
+
+/// LRDIMM F0RC13[NumLogicalRanks]
+typedef struct {
+ UINT16 NumPhyRanks:3; ///< NumPhyRanks
+ UINT16 DramCap:4; ///< DramCap
+ UINT16 NumDimmSlot:9; ///< NumDimmSlot
+ UINT8 NumLogRanks; ///< NumLogRanks
+} PSCFG_L_NLR_ENTRY;
+
+/// UDIMM&RDIMM&LRDIMM pass1 seed entry
+typedef struct {
+ UINT8 DimmPerCh; ///< Dimm per channel
+ UINT8 Channel; ///< Channel#
+ UINT16 SeedVal; ///< Seed value
+} PSCFG_SEED_ENTRY;
+
+/// Platform specific configuration types
+typedef enum {
+ PSCFG_MAXFREQ, ///< PSCFG_MAXFREQ
+ PSCFG_LR_MAXFREQ, ///< PSCFG_LR_MAXFREQ
+ PSCFG_RTT, ///< PSCFG_RTT
+ PSCFG_LR_RTT, ///< PSCFG_LR_RTT
+ PSCFG_ODT_PAT_1D, ///< PSCFG_ODT_PAT_1D
+ PSCFG_ODT_PAT_2D, ///< PSCFG_ODT_PAT_2D
+ PSCFG_ODT_PAT_3D, ///< PSCFG_ODT_PAT_3D
+ PSCFG_LR_ODT_PAT_1D, ///< PSCFG_LR_ODT_PAT_1D
+ PSCFG_LR_ODT_PAT_2D, ///< PSCFG_LR_ODT_PAT_2D
+ PSCFG_LR_ODT_PAT_3D, ///< PSCFG_LR_ODT_PAT_3D
+ PSCFG_SAO, ///< PSCFG_SAO
+ PSCFG_LR_SAO, ///< PSCFG_LR_SAO
+ PSCFG_MR0WR, ///< PSCFG_MR0WR
+ PSCFG_MR0CL, ///< PSCFG_MR0CL
+ PSCFG_RC2IBT, ///< PSCFG_RC2IBT
+ PSCFG_RC10OPSPD, ///< PSCFG_RC10OPSPD
+ PSCFG_LR_IBT, ///< PSCFG_LR_IBT
+ PSCFG_LR_NPR, ///< PSCFG_LR_NPR
+ PSCFG_LR_NLR, ///< PSCFG_LR_NLR
+ PSCFG_S2D, ///< PSCFG_S2D
+ PSCFG_WL_PASS1_SEED, ///< PSCFG_WL_PASS1_SEED
+ PSCFG_HWRXEN_PASS1_SEED, ///< PSCFG_HWRXEN_SEED
+ PSCFG_CADBUS, ///< PSCFG_CADBUS
+ PSCFG_DATABUS, ///< PSCFG_DATABUS
+
+ // The type of general table entries could be added between
+ // PSCFG_GEN_START and PSCFG_GEN_END so that the PSCGen routine
+ // is able to look for the entries per the PSCType.
+ PSCFG_GEN_START, ///< PSCFG_GEN_START
+ PSCFG_CLKDIS, ///< PSCFG_CLKDIS
+ PSCFG_CKETRI, ///< PSCFG_CKETRI
+ PSCFG_ODTTRI, ///< PSCFG_ODTTRI
+ PSCFG_CSTRI, ///< PSCFG_CSTRI
+ PSCFG_GEN_END ///< PSCFG_GEN_END
+} PSCFG_TYPE;
+
+/// Dimm types
+typedef enum {
+ UDIMM_TYPE = 0x01, ///< UDIMM_TYPE
+ RDIMM_TYPE = 0x02, ///< RDIMM_TYPE
+ SODIMM_TYPE = 0x04, ///< SODIMM_TYPE
+ LRDIMM_TYPE = 0x08, ///< LRDIMM_TYPE
+ SODWN_SODIMM_TYPE = 0x10, ///< SODWN_SODIMM_TYPE
+ DT_DONT_CARE = 0xFF ///< DT_DONT_CARE
+} DIMM_TYPE;
+
+/// Number of DRAM devices or DIMM slots
+typedef enum {
+ _1DIMM = 0x01, ///< _1DIMM
+ _2DIMM = 0x02, ///< _2DIMM
+ _3DIMM = 0x04, ///< _3DIMM
+ _4DIMM = 0x08, ///< _4DIMM
+ _DIMM_NONE = 0xF0, ///< _DIMM_NONE (no DIMM slot)
+ NOD_DONT_CARE = 0xFF ///< NOD_DONT_CARE
+} NOD_SUPPORTED;
+
+/// Table header related definitions
+typedef struct {
+ PSCFG_TYPE PSCType; ///< PSC Type
+ DIMM_TYPE DimmType; ///< Dimm Type
+ NOD_SUPPORTED NumOfDimm; ///< Numbef of dimm
+ CPU_LOGICAL_ID LogicalCpuid; ///< Logical Cpuid
+ UINT8 PackageType; ///< Package Type
+ TECHNOLOGY_TYPE TechType; ///< Technology type
+} PSC_TBL_HEADER;
+
+/// Table entry
+typedef struct {
+ PSC_TBL_HEADER Header; ///< PSC_TBL_HEADER
+ UINT8 TableSize; ///< Table size
+ VOID *TBLPtr; ///< Pointer of the table
+} PSC_TBL_ENTRY;
+
+#define PT_DONT_CARE 0xFF
+#define NP 1
+#define V1_5 1
+#define V1_35 2
+#define V1_25 4
+#define VOLT_ALL (V1_5 | V1_35 | V1_25)
+#define DIMM_SR 2
+#define DIMM_DR 4
+#define DIMM_QR 8
+#define DIMM_LR 2
+#define R0 1
+#define R1 2
+#define R2 4
+#define R3 8
+#define CH_A 0x01
+#define CH_B 0x02
+#define CH_C 0x04
+#define CH_D 0x08
+#define CH_ALL 0x0F
+
+/// CAD Bus configuration
+typedef struct {
+ UINT32 DimmPerCh:2; ///< Bitmap of Dimm slot per chanel
+ UINT32 DDRrate:18; ///< Bitmap of DDR rate
+ UINT32 VDDIO:4; ///< Bitmap of VDDIO
+ UINT32 Dimm0:4; ///< Bitmap of rank type of Dimm0
+ UINT32 Dimm1:4; ///< Bitmap of rank type of Dimm1
+
+ UINT32 SlowMode:8; ///< SlowMode
+ UINT32 AddrCmdCtl:24; ///< AddrCmdCtl
+
+ UINT8 CkeStrength; ///< CKE drive strength
+ UINT8 CsOdtStrength; ///< CS ODT drive strength
+ UINT8 AddrCmdStrength; ///< Addr Cmd drive strength
+ UINT8 ClkStrength; ///< CLK drive strength
+} PSCFG_CADBUS_ENTRY;
+
+/// On die termination encoding
+typedef enum {
+ ODT_OFF = 0, ///< 0 On die termination disabled
+ ODT_60 = 1, ///< 1 60 ohms
+ ODT_120 = 2, ///< 2 120 ohms
+ ODT_40 = 3, ///< 3 40 ohms
+ ODT_20 = 4, ///< 4 20 ohms
+ ODT_30 = 5, ///< 5 30 ohms
+} ODT_ENC;
+
+/// Data Bus configuration
+typedef struct {
+ UINT32 DimmPerCh:2; ///< Bitmap of Dimm slot per chanel
+ UINT32 DDRrate:18; ///< Bitmap of DDR rate
+ UINT32 VDDIO:4; ///< Bitmap of VDDIO
+ UINT32 Dimm0:4; ///< Bitmap of rank type of Dimm0
+ UINT32 Dimm1:4; ///< Bitmap of rank type of Dimm1
+
+ UINT32 RttNom:4; ///< Rtt_Nom
+ UINT32 RttWr:4; ///< Rtt_Wr
+ UINT32 DqStrength:8; ///< Data drive strength
+ UINT32 DqsStrength:8; ///< DQS drive strength
+ UINT32 OdtStrength:8; ///< ODT drive strength
+} PSCFG_DATABUS_ENTRY;
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+AGESA_STATUS
+MemPConstructPsUDef (
+ IN OUT MEM_DATA_STRUCT *MemPtr,
+ IN OUT CH_DEF_STRUCT *ChannelPtr,
+ IN OUT MEM_PS_BLOCK *PsPtr
+ );
+
+BOOLEAN
+MemPGetDramTerm (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 ArraySize,
+ IN CONST DRAM_TERM_ENTRY *DramTermPtr
+ );
+
+UINT16
+MemPGetPorFreqLimit (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN UINT8 FreqLimitSize,
+ IN CONST POR_SPEED_LIMIT *FreqLimitPtr
+ );
+
+VOID
+MemPGetPORFreqLimitDef (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+BOOLEAN
+MemPPSCFlow (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemPConstructRankTypeMap (
+ IN UINT16 Dimm0,
+ IN UINT16 Dimm1,
+ IN UINT16 Dimm2,
+ IN OUT UINT16 *RankTypeInTable
+ );
+
+BOOLEAN
+MemPIsIdSupported (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN CPU_LOGICAL_ID LogicalId,
+ IN UINT8 PackageType
+ );
+
+UINT16
+MemPGetPsRankType (
+ IN CH_DEF_STRUCT *CurrentChannel
+ );
+
+BOOLEAN
+MemPRecPSCFlow (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemPRecConstructRankTypeMap (
+ IN UINT16 Dimm0,
+ IN UINT16 Dimm1,
+ IN UINT16 Dimm2,
+ IN OUT UINT16 *RankTypeInTable
+ );
+
+BOOLEAN
+MemPRecIsIdSupported (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN CPU_LOGICAL_ID LogicalId,
+ IN UINT8 PackageType
+ );
+
+UINT16
+MemPRecGetPsRankType (
+ IN CH_DEF_STRUCT *CurrentChannel
+ );
+
+UINT16
+MemPProceedTblDrvOverride (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 ProceededPSOType
+ );
+
+BOOLEAN
+MemPGetPSCPass1Seed (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+VOID
+MemPPreparePsTabLookupConditions (
+ IN OUT MEM_NB_BLOCK *NBPtr
+ );
+
+PSC_TBL_ENTRY *
+MemPGetTableEntry (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN PSC_TBL_ENTRY *ListOfTables[],
+ OUT UINT8 *TableSize
+ );
+
+BOOLEAN
+MemPLookupCadBusCfgTabs (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN PSC_TBL_ENTRY *ListOfTables[]
+ );
+
+BOOLEAN
+MemPLookupDataBusCfgTabs (
+ IN OUT MEM_NB_BLOCK *NBPtr,
+ IN PSC_TBL_ENTRY *ListOfTables[]
+ );
+
+#endif /* _MP_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mport.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mport.h
new file mode 100644
index 0000000..3e7e23b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mport.h
@@ -0,0 +1,70 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mport.h
+ *
+ * API's to support different OS
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+ /*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ *===========================================================================
+ * AMD Revision History
+ * Initial Version
+ *
+ */
+#ifndef _MPORT_H_
+#define _MPORT_H_
+
+///< 64 bit data structure
+///< lo - Lower 32 bits
+///< hi - Upper 32 bits
+typedef struct {
+ UINT32 lo; ///< Lower 32 bits
+ UINT32 hi; ///< Upper 32 bits
+} S_UINT64;
+/*
+ * SBDFO - Segment Bus Device Function Offset
+ * 31:28 Segment (4-bits)
+ * 27:20 Bus (8-bits)
+ * 19:15 Device (5-bits)
+ * 14:12 Function(3-bits)
+ * 11:00 Offset (12-bits)
+ */
+typedef UINT32 SBDFO;
+
+#define GET_SIZE_OF(x) (sizeof (x) / sizeof (x[0]))
+
+#endif /* _MPORT_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mt.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mt.h
new file mode 100644
index 0000000..90250a2
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mt.h
@@ -0,0 +1,634 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mt.h
+ *
+ * Common Technology
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MT_H_
+#define _MT_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+#define FIRST_PASS 1
+#define SECOND_PASS 2
+#define BIGPAGE_X8_RJ16 0x80
+#define BIGPAGE_X8 0x800000ul
+#define DQS_FAIL 1
+#define DQS_PASS 0
+#define DQS_WRITE_DIR 1
+#define WRITE_DAT_DIR 1
+#define DQS_READ_DIR 0
+#define MIN_DQS_WNDW 3
+#define ST_UNSTEADY 0
+#define ST_STEADY 1
+#define ST_GROSS_SWEEP 2
+#define ST_FINE_SWEEP 3
+#define ST_FINISH 4
+#define NIBBLE_0 0
+#define NIBBLE_1 1
+
+#define MAX_BYTELANES_PER_CHANNEL (8 + 1) ///< Max Bytelanes per channel
+
+#define MAX_FILTER_DLY_DDR2 0x20
+#define MAX_FILTER_DLY_DDR3 0x28
+
+#define NEW_RECEIVER_START_VALUE 0x4
+#define NEW_RECEIVER_STEP_1 4
+#define NEW_RECEIVER_STEP_2 7
+
+#define NEW_RECEIVER_FINAL_OFFSETVALUE 5
+
+#define MAX_POS_RX_EN_SEED_GROSS_RANGE 0x20 ///< Max Range RxEn Seed Gross
+#define MAX_POS_RX_EN_SEED_GROSS_DIR 0x2 ///< Max RxEn Seed Gross Direction
+
+#define DBG_PRINT_STAGE 18 // "Stage"
+#define DBG_PRINT_0_TO_64 23 // "0...64"
+#define DBG_SPACES_4 21 // 4 spaces
+#define DBG_POS_NEW_LINE 11 // New Line for POS training
+#define DBG_WR_DLY 24 // "Write Delay: "
+#define DBG_B_L_R_W_M 22 // " Bytelane Left Right Width Middle"
+#define DBG_RX_EN_NEW_LINE 25 // New Line for Rx En
+#define DBG_RX_EN_STAGE1 6 // "Receiver Enable Training Stage 1:"
+#define DBG_RX_EN_STAGE2 7 // "Receiver Enable Training Stage 2:"
+#define DBG_RX_EN_STAGE3 8 // "Receiver Enable Training Stage 3:"
+#define DBG_DLY_PER_BL 9 // "Dly per BL -"
+#define DBG_A_B_DLY 10 // "ALL BLs have Dly:"
+#define DBG_RCVR_PRT_VALUE 0x0010Ful // PORT for RX EN training to print a value
+#define DBG_RX_POS_PRT_VALUE 0x0011Ful // PORT for POS training to print a value
+
+#define DONE_FILTER 0 ///< optimized receiver enable training glitch search complete
+#define START_FILTER 1 ///< optimized receiver enable training start glitch filter search
+#define FILTER_FIRST_STAGE_COUNT 4 ///< optimized receiver enable training glitch filter first stage count
+#define FILTER_SECOND_STAGE_COUNT 7 ///< optimized receiver enable training glitch second stage count
+#define FILTER_OFFSET_VALUE 0x1C ///< optimized receiver enable training glitch filter offset value int preamble
+#define FILTER_WINDOW_SIZE 0x28 ///< optimized receiver enable training glitch filter search window size
+#define FILTER_MAX_REC_EN_DLY_VALUE 0x1FF ///< optimized receiver enable glitch filter max receiver value
+#define FILTER_NEW_RECEIVER_START_VALUE 0x0 ///< optimized receiver enable glitch filter Start value
+#define MAX_NUMBER_NIBBLES 18 ///< Maximum number of nibbles
+#define MAX_NUMBER_LANES 18 ///< Maximum number of lanes (nibbles or bytes)
+#define MAX_2D_VREF_ENTRIES 0x20 ///< Maximum number of vref entries
+#define MAX_RD_DQS_ENTRIES 0x40 ///< Maximum number of RDDQS Entries
+#define VREF_ADDITIONAL_STEP_SIZE 0x0 ///< Vref Additional Step size
+#define RDDQS_ADDITIONAL_STEP_SIZE 0x0 ///< RdDqs Additional Step size
+#define MAX_2D_DQS_SEED_COUNT 4 ///< Max Seed count
+#define MAX_2D_RDDQS_CS_PER_CHANNEL 8 ///< Max CS per RdDQS delay group
+
+#define EYERIM_PARALLEL_SAMPLING TRUE
+#define EYERIM_BROADCAST_DELAYS TRUE
+#define SAMPLE_INDEX(l, y, x) (((l) * MAX_2D_VREF_ENTRIES * MAX_RD_DQS_ENTRIES) + ((y) * MAX_RD_DQS_ENTRIES) + (x))
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+/// List for Technology specific functions that are supported
+typedef enum {
+ WlTrainingPrepareLrdimm, ///< Technology specific tasks to prepare LRDIMMs for Training
+ LrdimmControlRegInit, ///< Technology specific tasks to send control words to initialize an LRDIMM
+ LrdimmFreqChgCtrlWrd, ///< Technology specific tasks to send control words to reprogram LRDIMM's register
+ LrdimmSendAllMRCmds, ///< Technology specific tasks to send all MR commands
+ LrdimmRankMultiplication, ///< Determine Rank Multiplication to be used
+ LrdimmBuf2DramTrain, ///< Perform buffer to DRAM training for LRDIMMs
+ LrdimmSyncTrainedDlys, ///< Copy trained delay of the first rank of a QR LRDIMM to the third rank
+ LrdimmPresence, ///< Perform LRDIMM specific tasks at the time of Dimm Presence Detection
+ DataEyeSaveCompositeEyes, ///< Perform saving the composite data eyes to buffer
+ DataEyeCompressEyes, ///< Perform compress the composite data eyes.
+ NumberOfTechHooks ///< Size of list
+} TECHNOLOGY_SPECIFIC_FUNC_INDEX;
+
+/// Structure for RD DQS 2D training RDDQS delays.
+typedef struct {
+ UINT32 PosRdDqsDly; ///< Positive RdDQS Delay
+ UINT32 NegRdDqsDly; ///< Negative RdDQS Delay
+} RD_DQS_2D;
+/// Structure for RD DQS 2D training Vref delays
+typedef struct {
+ RD_DQS_2D *Vref;///< pointer to Vref Entries
+ UINT16 Convolution[MAX_RD_DQS_ENTRIES]; ///< Total number of passes in each mask
+ UINT8 PosHeight[MAX_RD_DQS_ENTRIES / 2]; ///< Positive Vref height Height per Delay
+ UINT8 NegHeight[MAX_RD_DQS_ENTRIES / 2]; ///< Negative Vref height Height per Delay
+ UINT8 HalfDiamondHeight; ///< Half of the Height per BL (height of pos/neg vref)
+ UINT8 MaxRdDqs; ///< Max RdDqs from convolution function
+} VREF_2D;
+/// Structure for RD DQS 2D training Nibbles
+typedef struct {
+ VREF_2D Lane[MAX_NUMBER_LANES]; ///< Bytelane or Nibble
+ UINT8 Vnom; // Nominal Vref value
+ UINT8 MaxRdDqsSweep; // Maximum RdDqs Sweep size
+ UINT8 SmallestPosMaxVrefperCS[MAX_2D_RDDQS_CS_PER_CHANNEL]; // Smallest Positive Max Vref per CS
+ UINT8 SmallestNegMaxVrefperCS[MAX_2D_RDDQS_CS_PER_CHANNEL]; // Smallest Negative Max Vref per CS
+ UINT8 DiamondLeft[MAX_2D_VREF_ENTRIES]; // Left edge of Diamond for shape display
+ UINT8 DiamondRight[MAX_2D_VREF_ENTRIES]; // Left edge of Diamond for shape display
+} MEM_2D_ENTRY;
+
+/// Structure for RD DQS 2D training Nibbles
+typedef struct {
+ VREF_2D LaneSaved[MAX_NUMBER_LANES]; ///< Bytelane or Nibble that was saved
+ INT8 xMin; //Minimum value for RdDqs delays
+ INT8 xMax; //Maximum value for RdDqs delays
+ INT8 yMin; //Minimum value for vref delays
+ INT8 yMax; //Maximum value for vref delays
+ BOOLEAN ParallelSampling; ///< Flag to indicate parallel sampling feature
+ BOOLEAN BroadcastDelays; ///< Flag to indicate if delays will be broadcast
+ UINT32 SampleCount; ///< Count of samples taken
+ UINT32 VrefUpdates; ///< Count of updates to Vref
+ UINT32 RdDqsDlyUpdates; ///< Count of updates to RdDqsDly
+ INT8 Dirs[2]; ///< List of directions to search for each axis
+} MEM_2D_RIM_ENTRY;
+
+/// Structure for Technology block.
+typedef struct _MEM_TECH_BLOCK {
+ MEM_NB_BLOCK *NBPtr; ///< point to northbridge block.
+ MEM_PARAMETER_STRUCT *RefPtr; ///< point to parameter list.
+
+ /* Temporary storage */
+ UINT32 HwcrLo; ///< value of HWCR.
+ UINT32 CR4reg; ///< CR4 register value.
+ UINT8 DramEcc; ///< value of Dram ECC bit.
+ UINT8 *TestBufPtr; ///< point to buffer to store read-back data.
+ UINT8 *PatternBufPtr; ///< point to pattern buffer.
+ UINT16 PatternLength; ///< the length of pattern buffer in cache lines.
+ UINT8 Direction; ///< direction during training.
+ UINT8 ChipSel; ///< chip select number.
+ INT8 RestartChipSel; ///< is used to save the chipsel at which first RdDqsDly retrain is issued
+ UINT16 MaxDlyForMaxRdLat; ///< Largest possible value for Receiver enable delay.
+ UINT16 PrevSpeed; ///< Previous MemClk frequency
+ TRAINING_TYPE TrainingType; ///< Type of training currently being done
+ UINT8 TargetDIMM; ///< Target DIMM to being trained
+ INT16 WLCriticalDelay; ///< Minimum WL Dly of all byte lanes and all DIMMs
+ UINT8 Bytelane; ///< Bytelane being trained
+ UINT8 TrnNibble; ///< Nibble being trained
+
+
+ UINT8 Pass; ///< current pass of training.
+ UINT16 DqsRdWrPosSaved; ///< for position training byte lane saved flag
+ UINT16 DqsRcvEnSaved; ///< for TrainRcvrEn UINT8 lane saved flag
+ UINT16 DqsRcvEnSavedS1; ///< for TrainRcvrEn UINT8 lane saved flag
+ UINT16 DqsRcvEnFirstPassVal; ///< for TrainRcvrEn UINT8 lane saved flag
+ BOOLEAN GetFirstPassVal; ///< If the first passing value has been found.
+ BOOLEAN RevertPassVal; ///< Flag to restart training during training process when glitch is found.
+ UINT8 MaxFilterDly; ///< Maximum filter delay value for RcvrTraining.
+ UINT16 RcvrEnDlyOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Receiver Enable delay for optimized filter
+ UINT16 MaxRcvrEnDlyBlOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Max Receiver Enable delay for optimized filter
+ UINT16 RcvrEnDlyLimitOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Receiver Enable delay Limit for optimized filter
+ UINT16 FilterStatusOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Filter status to indicate if a ByteLane is "DONE", "SKIP" or "CONTINUE"
+ UINT16 FilterCountOpt; ///< Filter count to indicate the total number of ByteLanes completed
+ BOOLEAN DqsRcvEnSavedOpt[MAX_BYTELANES_PER_CHANNEL]; ///< for optimized TrainRcvrEn lane saved flag
+ UINT16 DqsRcvEnFirstPassValOpt[MAX_BYTELANES_PER_CHANNEL]; ///< for TrainRcvrEn UINT8 lane saved flag for optimized
+ BOOLEAN GetFirstPassValOpt[MAX_BYTELANES_PER_CHANNEL]; ///< If the first passing value has been found for optimized.
+ BOOLEAN RevertPassValOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Flag to restart training during training process when glitch is found for optimized.
+ UINT8 MaxFilterDlyBlOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Maximum filter delay value for RcvrTraining for optimized.
+ BOOLEAN IncBy1ForNextCountOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Used to determine when to increment by 1 in second stage of opt. rec. en. training
+ UINT8 FilterSidePassCountOpt[MAX_BYTELANES_PER_CHANNEL]; ///< Indicates that previous side passed
+ UINT16 DiffSeedGrossSeedPreGross[MAX_BYTELANES_PER_CHANNEL]; ///< Gross difference between GrossSeed and SeedPreGross for HwRxEn Training.
+ UINT16 PrevPassRcvEnDly[MAX_BYTELANES_PER_CHANNEL]; ///< Receiver Enable Delay value from the previous pass
+ BOOLEAN SmallDqsPosWindow; ///< Status flag to record small DQS position window event
+ UINT8 WlNibbleDly[MAX_BYTELANES_PER_CHANNEL]; ///< Nibble based trainig results for Nibble 0 of Write Levelization
+ UINT16 WlNibble0Seed[MAX_BYTELANES_PER_CHANNEL]; ///< Nibble based trainig seed value for Nibble 0 Write Levelization
+ UINT16 RxEnNibbleDly[MAX_BYTELANES_PER_CHANNEL]; ///< Nibble based trainig results for Nibble 0 of Rx En training
+ BOOLEAN ByteLaneError[MAX_BYTELANES_PER_CHANNEL]; ///< Indicates that an error has occured on a bytelane
+ UINT16 RxOrig[MAX_BYTELANES_PER_CHANNEL]; ///< Original RxEn Delays for seedless training
+ MEM_2D_ENTRY *Local2DData; ///< Pointer to local data structure
+ MEM_2D_RIM_ENTRY *SavedData; ///< Eye rim search save data
+ VOID *RdWr2DData; ///< 2D Read/Write Training Feature Data Struct Pointer
+
+ /* PUBLIC functions */
+ VOID (*SendAllMRCmds) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 ChipSel); ///< Send MRS command.
+ VOID (*FreqChgCtrlWrd) (struct _MEM_TECH_BLOCK *TechPtr); ///< Frequency change control word.
+ BOOLEAN (*SetDramMode) (struct _MEM_TECH_BLOCK *TechPtr); ///< Set dram mode (DDR2 or DDR3).
+ BOOLEAN (*DimmPresence) (struct _MEM_TECH_BLOCK *TechPtr); ///< determines if DIMMs present.
+ BOOLEAN (*SpdCalcWidth) (struct _MEM_TECH_BLOCK *TechPtr); ///< check the symmetry of DIMM pairs.
+ BOOLEAN (*SpdGetTargetSpeed) (struct _MEM_TECH_BLOCK *TechPtr); ///< get supported frequency.
+ BOOLEAN (*AutoCycTiming) (struct _MEM_TECH_BLOCK *TechPtr); ///< configure timing based on spd data.
+ BOOLEAN (*SpdSetBanks) (struct _MEM_TECH_BLOCK *TechPtr); ///< set bank address.
+ BOOLEAN (*SetDqsEccTmgs) (struct _MEM_TECH_BLOCK *TechPtr); ///< DQS training.
+ VOID (*GetCSIntLvAddr) (UINT8 BankEnc, UINT8 *LowBit, UINT8 *HiBit); ///< Get Chip select interleave address.
+ VOID (*AdjustTwrwr) (struct _MEM_TECH_BLOCK *TechPtr); ///< Adjust Twrwr for certain dimm technology.
+ VOID (*AdjustTwrrd) (struct _MEM_TECH_BLOCK *TechPtr); ///< Adjust Twrrd for certain dimm technology.
+ INT8 (*GetLD) (struct _MEM_TECH_BLOCK *TechPtr); ///< Get LD value for certain dimm technology.
+ VOID (*DramInit) (struct _MEM_TECH_BLOCK *TechPtr); ///< dram initialization.
+
+ /* PRIVATE functions */
+ VOID (*InitDQSPos4RcvrEn) (struct _MEM_TECH_BLOCK *TechPtr); ///< Initialize training register before training.
+ VOID (*SetRcvrEnDly) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver, UINT16 RcvEnDly); ///< Set receiver enable delay register value.
+ VOID (*LoadRcvrEnDly) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver); ///< Load receiver enable delay register value.
+ BOOLEAN (*SaveRcvrEnDly) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver, UINT16 RcvEnDly, UINT16 cmpResultRank0, UINT16 cmpResultRank1); ///< Save receiver enable delay register value.
+ BOOLEAN (*SaveRcvrEnDlyFilter) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver, UINT16 RcvEnDly, UINT16 cmpResultRank0, UINT16 cmpResultRank1); ///< saves passing DqsRcvEnDly values to the stack.
+ VOID (*ResetDCTWrPtr) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver); ///< resets the DCT input buffer write pointer.
+ UINT16 (*Compare1ClPattern) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Buffer[], UINT8 Pattern[]); ///< Compare training pattern of 1 cache line.
+ VOID (*SkipChipSelPass1) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 *ChipSel); ///< skips odd chip select if training at 800MT or above.
+ VOID (*SkipChipSelPass2) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 *ChipSel); ///< skips odd chip select if training at 800MT or above.
+ UINT16 (*CompareTestPatternFilter) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Buffer[], UINT8 Pattern[], UINT16 ByteCount); ///< compare training pattern with filter.
+ UINT8 (*MaxByteLanes) ( VOID ); ///< return maximum number of bytelanes.
+ VOID (*SetDQSDelayCSR) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 ByteLane, UINT8 Dly); ///< Set CSR.
+ VOID (*DQSWindowSave) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 ByteLane, UINT8 DlyMin, UINT8 DlyMax); ///< programs the trained DQS delay for the specified byte lane and stores its DQS window for reference.
+ BOOLEAN (*FindMaxDlyForMaxRdLat) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 *ChipSel); ///< Find maximum receiver enable delay value.
+ UINT8 (*DlyTableWidth) ( VOID ); ///< return the width of the delay tables (eg. RcvEnDlys, WrDqsDlys,...) in number of bytes.
+ UINT16 (*Compare1ClPatternOpt) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Buffer[], UINT8 Pattern[], UINT8 Side, UINT8 Receiver, BOOLEAN Side1En); ///< Compare training pattern of 1 cache line.
+ VOID (*LoadRcvrEnDlyOpt) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver); ///< Load receiver enable delay register value.
+ VOID (*SetRcvrEnDlyOpt) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver, UINT16 RcvEnDly); ///< Set receiver enable delay register value.
+ BOOLEAN (*CheckRcvrEnDlyLimitOpt) (struct _MEM_TECH_BLOCK *TechPtr); ///< Find limit for all bytelanes
+ UINT16 (*GetMaxValueOpt) (struct _MEM_TECH_BLOCK *TechPtr); ///< Returns the max value of all bytelanes
+ VOID (*InitializeVariablesOpt) (struct _MEM_TECH_BLOCK *TechPtr); ///< Initialized variables for optimized training
+ BOOLEAN (*SetSweepErrorOpt)(struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver, UINT8 DCT, BOOLEAN ErrorCheck); ///< records any errors generated from optimized sweep
+ VOID (*LoadInitialRcvrEnDlyOpt) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 Receiver); ///< Load the starting value for receiver DQS training.
+ BOOLEAN (*GetDimmSpdBuffer) (struct _MEM_TECH_BLOCK *TechPtr, UINT8 **SpdBuffer, UINT8 Dimm); ///< Gets pointer to spd buffer for a dimm on the current channel, if present
+ UINT8 (*GetMinMaxGrossDly) (struct _MEM_TECH_BLOCK *TechPtr, TRN_DLY_TYPE TrnDlyType, BOOLEAN IfMax); ///< Gets the minimum or maximum gross dly value
+
+ /* Technology Specific Hooks */
+ BOOLEAN (*(TechnologySpecificHook[NumberOfTechHooks])) (struct _MEM_TECH_BLOCK *TechPtr, VOID *OptParam); ///< Technology specific functions
+} MEM_TECH_BLOCK;
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+MemTDimmByteTrainInit (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTTrainMaxLatency (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTSetDQSEccTmgs (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTSetDQSEccTmgsRDdr3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTTrainRcvrEnSwPass1 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTTrainDQSEdgeDetectSw (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTTrainDQSEdgeDetect (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTDramInitSw3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+VOID
+MemTDramInitHw (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+BOOLEAN
+MemTFeatDef (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+BOOLEAN
+MemTSaveRcvrEnDlyByteFilter (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver,
+ IN UINT16 RcvEnDly,
+ IN UINT16 CmpResultRank0,
+ IN UINT16 CmpResultRank1
+ );
+
+BOOLEAN
+MemTSaveRcvrEnDlyByteFilterOpt (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver,
+ IN UINT16 RcvEnDly,
+ IN UINT16 CmpResultRank0,
+ IN UINT16 CmpResultRank1
+ );
+
+BOOLEAN
+MemTNewRevTrainingSupport (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTTrainOptRcvrEnSwPass1 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTWriteLevelizationHw3Pass1 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTWriteLevelizationHw3Pass2 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTPreparePhyAssistedTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTExitPhyAssistedTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTDqsTrainRcvrEnHwPass1 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTDqsTrainRcvrEnHwPass2 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemRecTSetWrDatRdDqs (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 WrDatDly
+ );
+
+VOID
+MemRecTTrainDQSPosSw (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemRecTTrainRcvrEnSw (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemRecTTrainRcvrEnHw (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemRecTTrainRcvrEnHwSeedless (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemRecTBeginTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemRecTEndTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTSetSweepErrorOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Receiver,
+ IN UINT8 Dct,
+ IN BOOLEAN ErrorCheck
+ );
+
+VOID
+MemTInitializeVariablesOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+UINT16
+MemTGetMaxValueOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTCheckRcvrEnDlyLimitOptByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemTMarkTrainFail (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+);
+
+VOID
+MemTBeginTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemTEndTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemTSetDQSDelayAllCSR (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Dly
+ );
+
+BOOLEAN
+MemTExitPhyAssistedTrainingClient3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTFindMaxRcvrEnDlyRdDqsDlyByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ OUT UINT8 *ChipSel
+ );
+
+BOOLEAN
+MemTFindMaxRcvrEnDlyRdDqsDlyByteUnb (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ OUT UINT8 *ChipSel
+ );
+
+VOID
+MemTSendCtlWord3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 CmdNum,
+ IN UINT8 Value
+ );
+
+VOID
+MemTCommonTechInit (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTLrdimmConstructor3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTRdPosWithRxEnDlySeeds3 (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemTTrackRxEnSeedlessRdWrNoWindBLError (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemTTrackRxEnSeedlessRdWrSmallWindBLError (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN OUT VOID *OptParam
+ );
+
+BOOLEAN
+MemTAmdRdDqs2DTraining (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemT2DProgramVref (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 Vref
+ );
+
+VOID
+MemT2DPrograRdDQSDly (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN UINT8 RdDQSDly
+ );
+
+BOOLEAN
+MemT2DRdDQSHeight (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ );
+
+BOOLEAN
+MemT2DRdDQSApplyMask (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ );
+
+UINT8
+MemGet2dRdDQSWidth (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ );
+
+BOOLEAN
+MemT2DRdDQSPrograMaxRdDQSDly (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ );
+
+UINT8
+MemT2DGetMaxLanes (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+StoreResult (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data,
+ IN UINT32 InPhaseResult[],
+ IN UINT32 PhaseResult180[]
+ );
+
+VOID
+MemT2DProgramIntExtVrefSelect (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemCheck2dRdDQSDiamondMaskStep (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data,
+ IN UINT8 Vref,
+ IN UINT8 Lane
+ );
+
+BOOLEAN
+MemT2DRdDQSFinalVrefMargin (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ );
+
+BOOLEAN
+MemT2DRdDQSFindCsVrefMargin (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ );
+
+BOOLEAN
+MemTCheck2DTrainingPerConfig (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+BOOLEAN
+MemT2DRdDQSEyeRimSearch (
+ IN OUT MEM_TECH_BLOCK *TechPtr
+ );
+
+VOID
+MemT2DRdDqsDisplaySearch (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ IN MEM_2D_ENTRY *Data
+ );
+
+BOOLEAN
+MemTFindMaxRcvrEnDlyTrainedByPmuByte (
+ IN OUT MEM_TECH_BLOCK *TechPtr,
+ OUT UINT8 *ChipSel
+ );
+
+#endif /* _MT_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mu.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mu.h
new file mode 100644
index 0000000..1489fe8
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/mu.h
@@ -0,0 +1,272 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mu.h
+ *
+ * Utility support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+ *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ***************************************************************************
+ *
+ */
+
+#ifndef _MU_H_
+#define _MU_H_
+
+/*----------------------------------------------------------------------------
+ * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ * DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#ifndef PSO_ENTRY
+ #define PSO_ENTRY UINT8
+#endif
+
+//
+// Maximum value macro
+//
+#ifndef MAX
+ #define MAX(X, Y) (((X) < (Y)) ? (Y) : (X))
+#endif
+//
+// Minimum Value macro
+//
+#ifndef MIN
+ #define MIN(X, Y) (((X) < (Y)) ? (X) : (Y))
+#endif
+//
+// Absolute Value Macro
+//
+#ifndef ABS
+ #define ABS(X) (((X) < 0) ? (-(X)) : (X))
+#endif
+//
+// Taking ceiling of (a / b)
+//
+#ifndef CEIL_DIV
+ #define CEIL_DIV(a, b) (((a) + (b) - 1) / (b))
+#endif
+//
+// Check if value x is a power of 2 or not
+//
+#ifndef IS_POWER_OF_2
+ #define IS_POWER_OF_2(x) (((x) & ((x) - 1)) == 0)
+#endif
+//
+// Find offset of a member variable in a struct
+//
+#ifndef OFFSET_OF
+ #define OFFSET_OF(s, m) ((UINTN) ( (UINT8 *)&((s *)0)->m - (UINT8 *)0 ))
+#endif
+
+/*----------------------------------------------------------------------------
+ * TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// Test patterns for DQS training
+typedef enum {
+ TestPattern0, ///< Test pattern used in first pass of receiver enable training
+ TestPattern1, ///< Test pattern used in first pass of receiver enable training
+ TestPattern2, ///< Test pattern used in second pass of receiver enable training
+ TestPatternJD1B, ///< 72-bit test pattern used in position training (ganged mode)
+ TestPatternJD1A, ///< 72-bit test pattern used in position training
+ TestPatternJD256B, ///< 256-bit test pattern used in position training (ganged mode)
+ TestPatternJD256A, ///< 256-bit test pattern used in position training
+ TestPatternML, ///< Test pattern used in first pass of max latency training
+ TestPattern3, ///< Test pattern used in first pass of receiver enable training
+ TestPattern4 ///< Test pattern used in first pass of receiver enable training
+} TRAIN_PATTERN;
+
+/*----------------------------------------------------------------------------
+ * FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+MemUWriteCachelines (
+ IN UINT32 Address,
+ IN UINT8 Pattern[],
+ IN UINT16 ClCount
+ );
+
+VOID
+MemUReadCachelines (
+ IN UINT8 Buffer[],
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ );
+
+VOID
+MemUDummyCLRead (
+ IN UINT32 Address
+ );
+
+VOID
+MemUFlushPattern (
+ IN UINT32 Address,
+ IN UINT16 ClCount
+ );
+
+
+VOID
+MemUFillTrainPattern (
+ IN TRAIN_PATTERN Pattern,
+ IN UINT8 Buffer[],
+ IN UINT16 Size
+ );
+
+UINT32
+MemUSetUpperFSbase (
+ IN UINT32 Address,
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+VOID
+MemUSetTargetWTIO (
+ IN UINT32 Address,
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+VOID
+MemUResetTargetWTIO (
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+VOID
+MemUProcIOClFlush (
+ IN UINT32 Address,
+ IN UINT16 ClCount,
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+VOID
+MemUWait10ns (
+ IN UINT32 Count,
+ IN OUT MEM_DATA_STRUCT *MemPtr
+ );
+
+VOID
+MemUGetWrLvNblErr (
+ IN OUT UINT16 *ErrBitmap,
+ IN UINT32 TestAddr,
+ IN UINT16 ClCount
+ );
+
+VOID
+AlignPointerTo16Byte (
+ IN OUT UINT8 **BufferPtrPtr
+ );
+
+VOID *
+FindPSOverrideEntry (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN PSO_ENTRY EntryType,
+ IN UINT8 SocketID,
+ IN UINT8 ChannelID,
+ IN UINT8 DimmID,
+ IN CPU_LOGICAL_ID *LogicalIdPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GetMaxDimmsPerChannel (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 SocketID,
+ IN UINT8 ChannelID
+ );
+
+UINT8
+GetMaxSolderedDownDimmsPerChannel (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 SocketID,
+ IN UINT8 ChannelID
+ );
+
+UINT8
+GetMaxChannelsPerSocket (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 SocketID,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GetMaxCSPerChannel (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 SocketID,
+ IN UINT8 ChannelID
+ );
+
+UINT8
+GetSpdSocketIndex (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 SocketID,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT8
+GetSpdChannelIndex (
+ IN PSO_TABLE *PlatformMemoryConfiguration,
+ IN UINT8 SocketID,
+ IN UINT8 ChannelID,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+UINT32
+GetVarMtrrHiMsk (
+ IN CPU_LOGICAL_ID *LogicalIdPtr,
+ IN AMD_CONFIG_PARAMS *StdHeader
+ );
+
+VOID
+MemUMFenceInstr (
+ VOID);
+
+UINT32
+MemUnsToMemClk (
+ IN UINT32 Speed,
+ IN UINT32 NumberOfns
+ );
+#endif /* _MU_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/cpcarmac.inc b/src/vendorcode/amd/agesa/f16kb/cpcarmac.inc
new file mode 100644
index 0000000..b29ea8c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/cpcarmac.inc
@@ -0,0 +1,476 @@
+;*****************************************************************************
+; AMD Generic Encapsulated Software Architecture
+;
+; Workfile: cpcarmac.inc $Revision:: 84150 $ $Date:: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+;
+; Description: Code to setup and break down cache-as-stack
+;
+;*****************************************************************************
+;
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*****************************************************************************
+
+ .XLIST
+ INCLUDE cpcar.inc
+ .LIST
+ .586P
+ .mmx
+
+STACK_AT_TOP EQU 0 ; Stack is at the top of CAR
+STACK_AT_BOTTOM EQU 1 ; Stack is at the bottom of CAR
+
+;======================================================================
+; AMD_ENABLE_STACK: Setup a stack
+;
+; In:
+; EBX = Return address (preserved)
+;
+; Out:
+; SS:ESP - Our new private stack location
+;
+; EAX = AGESA_STATUS
+; EDX = Return status code if EAX contains a return code of higher
+; severity than AGESA_SUCCESS
+; ECX = Stack size in bytes
+;
+; Requirements:
+; * This routine presently is limited to a max of 64 processor cores
+; Preserved:
+; ebx ebp
+; Destroyed:
+; eax, ecx, edx, edi, esi, ds, es, ss, esp
+; mmx0, mmx1, mmx5
+; Input Parameter:
+; STACK_AT_TOP (default)
+; Indicate stack is on the top of cache as RAM.
+; STACK_AT_BOTTOM
+; Indicate stack is at the bottom of cache as RAM.
+;
+; Description:
+; Fixed MTRR address allocation to cores:
+; The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K.
+; There is a max of 1 BSP, 7 core0s and 56 other cores.
+; Although each core has it's own cache storage, they share the address space. Each core must
+; be assigned a private and unique address space for its stack. To support legacy systems,
+; the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved
+; for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.)
+;
+; 80000h 40000h 00000h
+; +----------+----------+----------+----------+----------+----------+----------+----------+
+; 64K | | | | | | | | | 64K ea
+; ea +----------+----------+----------+----------+----------+----------+----------+----------+
+; | MTRR 0000_0250 MTRRfix64K_00000 |
+; +----------+----------+----------+----------+----------+----------+----------+----------+
+; | 3 | 2 | 1 | 0 | 0 | | | | <-node
+; | 15..1 | 15..1 | 15..1 | 15..1 | 0 | | | | <-core
+; +----------+----------+----------+----------+----------+----------+----------+----------+
+;
+; C0000h B0000h A0000h 90000h 80000h
+; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+;16K | | | | | | | | | | | | | | | | |
+; ea +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+; | MTRR 0259 MTRRfix16K_A0000 | MTRR 0258 MTRRfix16K_80000 |
+; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+; | > Dis|play B|uffer | < | | | | | | | | | | 3 | 2 | 1 | <-node
+; | > T| e m |p o r |a r y | B u |f f e |r A |r e a<| | | | | | 0 | 0 | 0 | <-core
+; +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+;
+; E0000h D0000h C0000h
+; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+; 4K | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea
+; ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+; | 026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000 | 0269 MTRRfix4K_C8000 | 0268 MTRRfix4K_C0000 |
+; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+; | | | | | | | | | | | | | | | | | >| V| I| D| E| O| |B |I |O |S | |A |r |e |a<|
+; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+;
+; 100000h F0000h E0000h
+; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+; | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea
+; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+; | 026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000 | 026D MTRRfix4K_E8000 | 026C MTRRfix4K_E0000 |
+; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+; | >|MA|IN| B|IO|S |RA|NG|E | | | | | | |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE| | | | | |< |
+; +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+;======================================================================
+AMD_ENABLE_STACK MACRO StackPosition
+ local AmdEnableStackExit
+
+; Note that SS:ESP will be default stack. Note that this stack
+; routine will not be used after memory has been initialized. Because
+; of its limited lifetime, it will not conflict with typical PCI devices.
+ movd mm0, ebx ; Put return address in a safe place
+ movd mm1, ebp ; Save some other user registers
+
+ ; get node id and core id of current executing core
+ GET_NODE_ID_CORE_ID ; Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node)
+ ; Note: ESI[31:24] are used for flags: Unrecognized Family, Is_Primary core, Stack already established
+
+ ; If we detected an unknown processor family or core combination, return AGESA_FATAL.
+ .if (esi & (1 SHL FLAG_UNKNOWN_FAMILY))
+ mov edx, CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY
+ mov eax, AGESA_FATAL
+ jmp AmdEnableStackExit
+ .elseif (esi & (1 SHL FLAG_CORE_NOT_IDENTIFIED))
+ mov edx, CPU_EVENT_CORE_NOT_IDENTIFIED
+ mov eax, AGESA_FATAL
+ jmp AmdEnableStackExit
+ .endif
+
+ ; determine if stack is already enabled. We are using the DefType MSR for this determination.
+ ; It is =0 after reset; CAR setup sets it to enable the MTRRs
+ mov eax, cr0 ; Is cache enabled? (CD or NW bit set)
+ CR0_MASK TEXTEQU %((1 SHL CR0_CD) OR (1 SHL CR0_NW))
+ .if (!(eax & CR0_MASK))
+ mov ecx, AMD_MTRR_DEFTYPE ; MSR:0000_02FF
+ _RDMSR ; Are either of the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN)
+ MSR_MASK TEXTEQU %((1 SHL MTRR_DEF_TYPE_EN)+(1 SHL MTRR_DEF_TYPE_FIX_EN))
+ .if (eax & MSR_MASK)
+ bts esi, FLAG_STACK_REENTRY ; indicate stack has already been initialized
+ .endif
+ .endif
+
+ ; Set node to map the first 16MB to node 0; 0000_0000 to 00FF_FFFF as DRAM
+ mov ebx, esi ; Get my Node/Core info
+ xor bl, bl
+ shl bh, 3 ; Isolate my node#, match alignment for PCI Dev#
+ mov eax, 8000C144h ; D18F1x44:DRAM Base/Limit; N is Base, N+4 is Limit
+ add ah, bh
+ mov ebx, eax ; Save PCI address for Base/Limit pair
+
+ mov dx, 0CF8h
+ out dx, eax
+ add dx, 4
+ xor eax, eax ; Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB)
+ out dx, eax ; DRAM Limit = node0, no interleave
+
+ mov eax, ebx
+ sub eax, 4 ; Now point to the Base register
+ mov dx, 0CF8h
+ out dx, eax
+ add dx, 4
+ mov eax, 00000003h ; Set the read and write enable bits
+ out dx, eax ; DRAM Base = 0x0000, R/W
+
+ AMD_ENABLE_STACK_FAMILY_HOOK
+
+ ; Init CPU MSRs for our init routines
+ mov ecx, MTRR_SYS_CFG ; SYS_CFG
+ _RDMSR
+ bts eax, MTRR_FIX_DRAM_MOD_EN ; Turn on modification enable bit
+ _WRMSR
+
+ mov eax, esi
+ bt eax, FLAG_STACK_REENTRY ; Is this a 2nd entry?
+ .if (!carry?) ; On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP
+ bt eax, FLAG_IS_PRIMARY ; Is this core the primary in a compute unit?
+ .if (carry?) ; Families using shared groups do not need to clear the MTRRs since that is done at power-on reset
+ ; Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores
+ ; Clear all variable and Fixed MTRRs for non-shared cores
+ mov ecx, AMD_MTRR_VARIABLE_BASE0
+ xor eax, eax
+ xor edx, edx
+ .while (cl != 10h) ; Variable MTRRphysBase[n] and MTRRphysMask[n]
+ _WRMSR
+ inc cl
+ .endw
+ mov cx, AMD_MTRR_FIX64k_00000 ; MSR:0000_0250
+ _WRMSR
+ mov cx, AMD_MTRR_FIX16k_80000 ; MSR:0000_0258
+ _WRMSR
+ mov cx, AMD_MTRR_FIX16k_A0000 ; MSR:0000_0259
+ _WRMSR
+ mov cx, AMD_MTRR_FIX4k_C0000 ; Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000
+ .while (cl != 70h)
+ _WRMSR
+ inc cl
+ .endw
+
+ ; Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init.
+ ; - not strictly needed since the FixedMTRRs take presedence.
+ mov eax, (16 * 1024 * 1024)
+ mov ecx, TOP_MEM ; MSR:C001_001A
+ _WRMSR
+ .endif ; End Is_Primary
+ .endif ; End Stack_ReEntry
+
+ ; Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores
+ xor eax, eax
+ xor edx, edx
+ mov ecx, IORR_BASE ; MSR:C001_0016 - 0019
+ .while (cl != 1Ah)
+ _WRMSR
+ inc cl
+ .endw
+ mov ecx, TOP_MEM2 ; MSR:C001_001D
+ _WRMSR
+
+ ; setup MTTRs for stacks
+ ; A speculative read can be generated by a speculative fetch mis-aligned in a code zone
+ ; or due to a data zone being interpreted as code. When a speculative read occurs outside a
+ ; controlled region (intentionally used by software), it could cause an unwanted cache eviction.
+ ; To prevent speculative reads from causing an eviction, the unused cache ranges are set
+ ; to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs.
+ ; Note: some core stack regions will share an MTRR since the control granularity is much
+ ; larger than the allocated stack zone. The allocation algorithm must account for this 'extra'
+ ; space covered by the MTRR when parseling out cache space for the various uses. In some cases
+ ; this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c
+ ;
+ ; Outcome of this block is that: (Note the MTRR map at the top of the file)
+ ; ebp - start address of stack block
+ ; ebx - [31:16] - MTRR MSR address
+ ; - [15:8] - slot# in MTRR register
+ ; - [7:0] - block size in #4K blocks
+ ; review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node)
+ ;
+
+ mov eax, esi ; Load Flags, node, core
+ .if (al == 0) ; Is a core 0?
+ .if (ah == 0) ; Is Node 0? (BSP)
+ ; Is BSP, assign a 64K stack; for F10/F12, foce to a 32K stack
+ mov ebx, ((AMD_MTRR_FIX64k_00000 SHL 16) + (3 SHL 8) + (BSP_STACK_SIZE_64K / 1000h))
+ bt eax, FLAG_FORCE_32K_STACK
+ .if (carry?)
+ mov ebx, ((AMD_MTRR_FIX64k_00000 SHL 16) + (3 SHL 8) + (BSP_STACK_SIZE_32K / 1000h))
+ .endif
+ mov ebp, BSP_STACK_BASE_ADDR
+ .else ; node 1 to 7, core0
+ ; Is a Core0 of secondary node, assign 16K stacks
+ mov bx, AMD_MTRR_FIX16k_80000
+ shl ebx, 16 ;
+ dec ah ; index from 0
+ mov bh, ah ; Node# is used as slot#
+ mov bl, (CORE0_STACK_SIZE / 1000h)
+ mov al, ah ; Base = (Node# * Size);
+ mul bl ;
+ movzx eax, ax ;
+ shl eax, 12 ; Expand back to full byte count (* 4K)
+ add eax, CORE0_STACK_BASE_ADDR
+ mov ebp, eax
+ .endif
+ .else ;core 1 thru core 15
+ ; Is core 1-15 of any node, assign 4K stacks
+ mov al, 16 ; CoreIndex = ( (Node# * 16) ...
+ mul ah ;
+ mov bx, si ;
+ dec bl ; account for core 0 on P1, etc
+ add al, bl ; ... + Core#);
+
+ mov bx, AMD_MTRR_FIX64k_00000
+ shl ebx, 16 ;
+ mov bh, al ; Slot# = (CoreIndex / 16) + 4;
+ shr bh, 4 ;
+ add bh, 4 ;
+ mov bl, (CORE1_STACK_SIZE / 1000h)
+
+ mul bl ; Base = ( (CoreIndex * Size) ...
+ movzx eax, ax ;
+ shl eax, 12 ; Expand back to full byte count (* 4K)
+ add eax, CORE1_STACK_BASE_ADDR ; ... + Base_Addr);
+ mov ebp, eax
+ .endif
+
+ ; Now set the MTRR. Add this to already existing settings (don't clear any MTRR)
+ mov edi, WB_DRAM_TYPE ; Load Cache type in 1st slot
+ mov cl, bh ; ShiftCount = ((slot# ...
+ and cl, 03h ; ... % 4) ...
+ shl cl, 3 ; ... * 8);
+ shl edi, cl ; Cache type is now in correct position
+ ror ebx, 16 ; Get the MTRR address
+ movzx ecx, bx ;
+ rol ebx, 16 ; Put slot# & size back in BX
+ _RDMSR ; Read-modify-write the MSR
+ .if (bh < 4) ; Is value in lower or upper half of MSR?
+ or eax, edi ;
+ .else ;
+ or edx, edi ;
+ .endif ;
+ _WRMSR ;
+
+ ; Enable MTRR defaults as UC type
+ mov ecx, AMD_MTRR_DEFTYPE ; MSR:0000_02FF
+ _RDMSR ; Read-modify-write the MSR
+ bts eax, MTRR_DEF_TYPE_EN ; MtrrDefTypeEn
+ bts eax, MTRR_DEF_TYPE_FIX_EN ; MtrrDefTypeFixEn
+ _WRMSR
+
+ ; Close the modification window on the Fixed MTRRs
+ mov ecx, MTRR_SYS_CFG ; MSR:0C001_0010
+ _RDMSR
+ bts eax, MTRR_FIX_DRAM_EN ; MtrrFixDramEn
+ bts eax, MTRR_VAR_DRAM_EN ; variable MTRR enable bit
+ btr eax, MTRR_FIX_DRAM_MOD_EN ; Turn off modification enable bit
+ _WRMSR
+
+ ; Enable caching in CR0
+ mov eax, CR0 ; Enable WT/WB cache
+ btr eax, CR0_PG ; Make sure paging is disabled
+ btr eax, CR0_CD ; Clear CR0 NW and CD
+ btr eax, CR0_NW
+ mov CR0, eax
+
+ ; Use the Stack Base & size to calculate SS and ESP values
+ ; review:
+ ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node)
+ ; ebp - start address of stack block
+ ; ebx - [31:16] - MTRR MSR address
+ ; - [15:8] - slot# in MTRR register
+ ; - [7:0] - block size in #4K blocks
+ ;
+ mov esp, ebp ; Initialize the stack pointer
+ mov edi, esp ; Copy the stack start to edi
+ movzx bx, bl
+ movzx ebx, bx ; Clear upper ebx, don't need MSR addr anymore
+ shl ebx, 12 ; Make size full byte count (* 4K)
+ IFNB <StackPosition>
+ IF (StackPosition EQ STACK_AT_BOTTOM)
+ shr ebx, 1 ; If stack is at the bottom of CAR, divide size by 2
+ ENDIF
+ ENDIF
+ add esp, ebx ; Set the Stack Pointer as full linear address
+ sub esp, 4
+ ;
+ ; review:
+ ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node)
+ ; edi - 32b start address of stack block
+ ; ebx - size of stack block
+ ; esp - 32b linear stack pointer
+ ;
+
+ ; Determine mode for SS base;
+ mov ecx, CR0 ; Check for 32-bit protect mode
+ bt ecx, CR0_PE ;
+ .if (!carry?) ; PE=0 means real mode
+ mov cx, cs ;
+ .if (cx >= 0D000h) ; If CS >= D000, it's a real mode segment. PM selector would be 08-> 1000
+ ; alter SS:ESP for 16b Real Mode:
+ mov eax, edi ;
+ shr eax, 4 ; Create a Real Mode segment for ss, ds, es
+ mov ss, ax ;
+ mov ds, ax ;
+ mov es, ax ;
+ shl eax, 4 ;
+ sub edi, eax ; Adjust the clearing pointer for Seg:Offset mode
+ mov esp, ebx ; Make SP an offset from SS
+ sub esp, 4 ;
+ .endif ; endif
+ ; else
+ ; Default is to use Protected 32b Mode
+ .endif
+ IFNB <StackPosition>
+ IF (StackPosition EQ STACK_AT_BOTTOM)
+ shl ebx, 1 ; restore the size of CAR
+ ENDIF
+ ENDIF
+ ;
+ ; Clear The Stack
+ ; Now that we have set the location and the MTRRs, initialize the cache by
+ ; reading then writing to zero all of the stack area.
+ ; review:
+ ; ss - Stack base
+ ; esp - stack pointer
+ ; ebx - size of stack block
+ ; esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node)
+ ; edi - address of start of stack block
+ ;
+ shr ebx, 2 ;
+ mov cx, bx ; set cx for size count of DWORDS
+ ; Check our flags - Don't clear an existing stack
+ .if ( !(esi & (1 SHL FLAG_STACK_REENTRY)) )
+ cld
+ mov esi, edi
+ rep lods DWORD PTR [esi] ; Pre-load the range
+ xor eax, eax
+ mov cx, bx
+ mov esi, edi ; Preserve base for push on stack
+ rep stos DWORD PTR [edi] ; Clear the range
+ mov DWORD PTR [esp], 0ABCDDCBAh ; Put marker in top stack dword
+ shl ebx, 2 ; Put stack size and base
+ push ebx ; in top of stack
+ push esi
+
+ mov ecx, ebx ; Return size of stack in bytes
+ mov eax, AGESA_SUCCESS ; eax = AGESA_SUCCESS : no error return code
+ .else
+ movzx ecx, cx
+ shl ecx, 2 ; Return size of stack, in bytes
+ mov edx, CPU_EVENT_STACK_REENTRY
+ mov eax, AGESA_WARNING ; eax = AGESA_WARNING (Stack has already been set up)
+ .endif
+
+AmdEnableStackExit:
+ movd ebx, mm0 ; Restore return address
+ movd ebp, mm1
+ENDM
+
+;======================================================================
+; AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine
+; should only be executed on the BSP
+;
+; In:
+; none
+;
+; Out:
+; EAX = AGESA_SUCCESS
+;
+; Preserved:
+; ebx
+; Destroyed:
+; eax, ecx, edx, esp, mmx5
+;======================================================================
+AMD_DISABLE_STACK MACRO
+
+ mov esp, ebx ; Save return address
+
+ ; get node/core/flags of current executing core
+ GET_NODE_ID_CORE_ID ; Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node)
+
+ ; Turn on modification enable bit
+ mov ecx, MTRR_SYS_CFG ; MSR:C001_0010
+ _RDMSR
+ bts eax, MTRR_FIX_DRAM_MOD_EN ; Enable modifications
+ _WRMSR
+
+ ; Set lower 640K MTRRs for Write-Back memory caching
+ mov ecx, AMD_MTRR_FIX64k_00000
+ mov eax, 1E1E1E1Eh
+ mov edx, eax
+ _WRMSR ; 0 - 512K = WB Mem
+ mov ecx, AMD_MTRR_FIX16k_80000
+ _WRMSR ; 512K - 640K = WB Mem
+
+ ; Turn off modification enable bit
+ mov ecx, MTRR_SYS_CFG ; MSR:C001_0010
+ _RDMSR
+ btr eax, MTRR_FIX_DRAM_MOD_EN ; Disable modification
+ _WRMSR
+
+ AMD_DISABLE_STACK_FAMILY_HOOK ; Re-Enable 'normal' cache operations
+
+ mov ebx, esp ; restore return address (ebx)
+ xor eax, eax
+
+ENDM
diff --git a/src/vendorcode/amd/agesa/f16kb/gcccar.inc b/src/vendorcode/amd/agesa/f16kb/gcccar.inc
new file mode 100644
index 0000000..90c8cc6a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/gcccar.inc
@@ -0,0 +1,1301 @@
+/*
+ * Copyright (c) 2012, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/******************************************************************************
+* AMD Generic Encapsulated Software Architecture
+*
+* $Workfile:: GccCar.inc $Revision:: 32932 $
+*
+* Description: GccCar.inc - AGESA cache-as-RAM setup Include File for GCC complier
+*
+******************************************************************************/
+
+.altmacro
+
+BSP_STACK_BASE_ADDR = 0x30000 /* Base address for primary cores stack */
+BSP_STACK_SIZE = 0x10000 /* 64KB for BSP core */
+CORE0_STACK_BASE_ADDR = 0x80000 /* Base address for primary cores stack */
+CORE0_STACK_SIZE = 0x4000 /* 16KB for primary cores */
+CORE1_STACK_BASE_ADDR = 0x40000 /* Base address for AP cores */
+CORE1_STACK_SIZE = 0x1000 /* 4KB for each AP cores */
+
+APIC_BASE_ADDRESS = 0x0000001B
+ APIC_BSC = 8 /* Boot Strap Core */
+
+APIC_MSG_REG = 0x380 # Location of BSC message
+ APIC_MSG = 0x00DE00AD # Message data
+ APIC_INVD_ALL_DONE_MSG = 0x00AD00DE /* Indicate all cores have invalidated */
+APIC_CMD_LO_REG = 0x300 # APIC command low
+APIC_CMD_HI_REG = 0x310 # APIC command high
+ REMOTE_READ_STS = 0x00030000 # Remote read status mask
+ REMOTE_DELIVERY_PEND = 0x00010000 # Remote read is pending
+ REMOTE_DELIVERY_DONE = 0x00020000 # Remote read is complete
+ DELIVERY_STS_BIT = 12 #Delivery status valid bit
+APIC_ID_REG = 0x0020 # Local APIC ID offset
+ APIC20_APICID = 24
+APIC_REMOTE_READ_REG = 0x00C0 # Remote read offset
+
+# Flags can only run from bits 31 to 24. Bits 23:0 are in use.
+AMD_CU_NEED_TO_WAIT = 31
+AMD_CU_SEND_INVD_MSG = 30
+AMD_CU_RESTORE_ES = 29
+
+AMD_MTRR_VARIABLE_BASE0 = 0x0200
+AMD_MTRR_VARIABLE_BASE6 = 0x020C
+AMD_MTRR_VARIABLE_BASE7 = 0x020E
+ VMTRR_VALID = 11
+ MTRR_TYPE_WB = 0x06
+ MTRR_TYPE_WP = 0x05
+ MTRR_TYPE_WT = 0x04
+ MTRR_TYPE_UC = 0x00
+AMD_MTRR_VARIABLE_MASK7 = 0x020F
+AMD_MTRR_FIX64k_00000 = 0x0250
+AMD_MTRR_FIX16k_80000 = 0x0258
+AMD_MTRR_FIX16k_A0000 = 0x0259
+AMD_MTRR_FIX4k_C0000 = 0x0268
+AMD_MTRR_FIX4k_C8000 = 0x0269
+AMD_MTRR_FIX4k_D0000 = 0x026A
+AMD_MTRR_FIX4k_D8000 = 0x026B
+AMD_MTRR_FIX4k_E0000 = 0x026C
+AMD_MTRR_FIX4k_E8000 = 0x026D
+AMD_MTRR_FIX4k_F0000 = 0x026E
+AMD_MTRR_FIX4k_F8000 = 0x026F
+
+/* Reproduced from AGESA.h */
+AMD_AP_MTRR_FIX64k_00000 = 0x00000250
+AMD_AP_MTRR_FIX16k_80000 = 0x00000258
+AMD_AP_MTRR_FIX16k_A0000 = 0x00000259
+AMD_AP_MTRR_FIX4k_C0000 = 0x00000268
+AMD_AP_MTRR_FIX4k_C8000 = 0x00000269
+AMD_AP_MTRR_FIX4k_D0000 = 0x0000026A
+AMD_AP_MTRR_FIX4k_D8000 = 0x0000026B
+AMD_AP_MTRR_FIX4k_E0000 = 0x0000026C
+AMD_AP_MTRR_FIX4k_E8000 = 0x0000026D
+AMD_AP_MTRR_FIX4k_F0000 = 0x0000026E
+AMD_AP_MTRR_FIX4k_F8000 = 0x0000026F
+CPU_LIST_TERMINAL = 0xFFFFFFFF
+
+AMD_MTRR_DEFTYPE = 0x02FF
+ WB_DRAM_TYPE = 0x1E /* MemType - memory type */
+ MTRR_DEF_TYPE_EN = 11 /* MtrrDefTypeEn - variable and fixed MTRRs default enabled */
+ MTRR_DEF_TYPE_FIX_EN = 10 /* MtrrDefTypeEn - fixed MTRRs default enabled */
+
+HWCR = 0x0C0010015 /* Hardware Configuration */
+ INVD_WBINVD = 0x04 /* INVD to WBINVD conversion */
+
+IORR_BASE = 0x0C0010016 /* IO Range Regusters Base/Mask, 2 pairs */
+ /* uses 16h - 19h */
+TOP_MEM = 0x0C001001A /* Top of Memory */
+TOP_MEM2 = 0x0C001001D /* Top of Memory2 */
+
+ DIS_STREAM_ST = 28 /* Family 14h:DisStreamSt - Disable Streaming Store functionality */
+
+IC_CFG = 0x0C0011021 /* Instruction Cache Config Register */
+ IC_DIS_SPEC_TLB_RLD = 9 /* Disable speculative TLB reloads */
+ DIS_IND = 14 /* Family 10-14h:Disable Indirect Branch Predictor */
+ DIS_I_CACHE = 14 /* Family 15h:DisICache - Disable Indirect Branch Predictor */
+
+DC_CFG = 0x0C0011022 /* Data Cache Configuration */
+ DC_DIS_SPEC_TLB_WALK = 4 /* Disable speculative table-walks */
+ DIS_HW_PF = 13 /* Hardware prefetches bit */
+DE_CFG = 0x0C0011029 /* Decode Configuration */
+ CL_FLUSH_SERIALIZE = 23 /* Family 12h,15h: CL Flush Serialization */
+
+BU_CFG2 = 0x0C001102A /* Family 10h: Bus Unit Configuration 2 */
+CU_CFG2 = 0x0C001102A /* Family 15h: Combined Unit Configuration 2 */
+ F10_CL_LINES_TO_NB_DIS = 15 /* ClLinesToNbDis - allows WP code to be cached in L2 */
+ IC_DIS_SPEC_TLB_WR = 35 /* IcDisSpecTlbWr - ITLB speculative writes */
+ F16_CL_LINES_TO_L2_DIS = 15 /* ClLinesToL2Dis */
+
+L2I_CFG = 0x0C00110A0 /* L2I Configuration */
+ L2_RINSER_DIS = 20 /* L2 rinser disable */
+ PREFETCHER_DIS = 7 /* L2 prefetcher disable*/
+ CACHE_IC_ATTR_DIS = 3 /* Inserting IC attributes into the L2 disable */
+
+CR0_PE = 0 # Protection Enable
+CR0_NW = 29 # Not Write-through
+CR0_CD = 30 # Cache Disable
+CR0_PG = 31 # Paging Enable
+
+/* CPUID Functions */
+
+CPUID_MODEL = 1
+AMD_CPUID_FMF = 0x80000001 /* Family Model Features information */
+AMD_CPUID_L2Cache = 0X80000006 /* L2/L3 cache info */
+AMD_CPUID_APIC = 0x80000008 /* Long Mode and APIC info., core count */
+ APIC_ID_CORE_ID_SIZE = 12 /* ApicIdCoreIdSize bit position */
+
+NB_CFG = 0x0C001001F /* Northbridge Configuration Register */
+ INIT_APIC_ID_CPU_ID_LO = 54 /* InitApicIdCpuIdLo - is core# in high or low half of APIC ID? */
+ ENABLE_CF8_EXT_CFG = 46 /* EnableCf8ExtCfg - enable CF8 extended configuration cycles */
+
+MTRR_SYS_CFG = 0x0C0010010 /* System Configuration Register */
+ CHX_TO_DIRTY_DIS = 16 /* ChxToDirtyDis Change to dirty disable */
+ SYS_UC_LOCK_EN = 17 /* SysUcLockEn System lock command enable */
+ MTRR_FIX_DRAM_EN = 18 /* MtrrFixDramEn MTRR fixed RdDram and WrDram attributes enable */
+ MTRR_FIX_DRAM_MOD_EN = 19 /* MtrrFixDramModEn MTRR fixed RdDram and WrDram modification enable */
+ MTRR_VAR_DRAM_EN = 20 /* MtrrVarDramEn MTRR variable DRAM enable */
+ MTRR_TOM2_EN = 21 /* MtrrTom2En MTRR top of memory 2 enable */
+
+PERF_CONTROL3 = 0x0C0010003 /* Performance event control three */
+ PERF_CONTROL3_RESERVE_L = 0x00200000 /* Preserve the reserved bits */
+ PERF_CONTROL3_RESERVE_H = 0x0FCF0 /* Preserve the reserved bits */
+ CONFIG_EVENT_L = 0x0F0E2 /* All cores with level detection */
+ CONFIG_EVENT_H = 4 /* Increment count by number of event */
+ /* occured in clock cycle */
+ EVENT_ENABLE = 22 /* Enable the event */
+PERF_COUNTER3 = 0x0C0010007 /* Performance event counter three */
+
+COMPUTE_UNIT_STATUS = 0x08000C580 /* Compute Unit Status Register */
+ QUAD_CORE = 24 /* QuadCore four cores of a compute unit are enabled */
+ DUAL_CORE = 16 /* DualCore two cores of a compute unit are enabled */
+ TRIPLE_CORE = 8 /* TripleCore three cores of a compute unit are enabled */
+ CU_ENABLED = 0 /* Enabled at least one core of a compute unit is enabled */
+
+FUNC_3 = 3
+MCA_NB_CFG = 0x44 /* MCA NB Configuration */
+CPU_ERR_DIS = 6 /* CPU error response disable */
+PRODUCT_INFO_REG1 = 0x1FC /* Product Information Register 1 */
+
+# Local use flags, in upper most byte if ESI
+FLAG_UNKNOWN_FAMILY = 24 # Signals that the family# of the installed processor is not recognized
+FLAG_STACK_REENTRY = 25 # Signals that the environment has made a re-entry (2nd) call to set up the stack
+FLAG_IS_PRIMARY = 26 # Signals that this core is the primary within the comoute unit
+FLAG_CORE_NOT_IDENTIFIED = 27 # Signals that the cores/compute units of the installed processor is not recognized
+FLAG_FORCE_32K_STACK = 28 # Signals that to force 32KB stack size for BSP core
+CR0_MASK = ((1 << CR0_CD) | (1 << CR0_NW))
+MSR_MASK = ((1 << MTRR_DEF_TYPE_EN)+(1 << MTRR_DEF_TYPE_FIX_EN))
+
+/****************************************************************************
+ *
+ * CPU MACROS - PUBLIC
+ *
+ ****************************************************************************/
+.macro _WRMSR
+ .byte 0x0f, 0x30
+.endm
+
+.macro _RDMSR
+ .byte 0x0F, 0x32
+.endm
+
+.macro AMD_CPUID arg0
+ .ifb \arg0
+ mov $0x1, %eax
+ .byte 0x0F, 0x0A2 /* Execute instruction */
+ bswap %eax
+ xchg %ah, %al /* Ext model in al now */
+ rol $0x08, %eax /* Ext model in ah, model in al */
+ and $0x0FFCF, ax /* Keep 23:16, 7:6, 3:0 */
+ .else
+ mov \arg0, %eax
+ .byte 0x0F, 0x0A2
+ .endif
+.endm
+
+.macro MAKE_EXT_PCI_ADDR Seg, Bus, Dev, Func, Offset
+ mov $(1 << 31 | (Seg) << 28 | (((Offset) & (0x0F00)) >> 8) << 24 | (Bus) << 16 | (Dev) << 11 | (Func) << 8) | ((Offset) & (0xFC)), %eax
+.endm
+/****************************************************************************
+*
+* AMD_ENABLE_STACK_FAMILY_HOOK Macro - Stackless
+*
+* Set any family specific controls needed to enable the use of
+* cache as general storage before main memory is available.
+*
+* Inputs:
+* none
+* Outputs:
+* none
+ ****************************************************************************/
+.macro AMD_ENABLE_STACK_FAMILY_HOOK
+
+ AMD_ENABLE_STACK_FAMILY_HOOK_F16
+
+.endm
+
+/****************************************************************************
+*
+* AMD_DISABLE_STACK_FAMILY_HOOK Macro - Stackless
+*
+* Return any family specific controls to their 'standard'
+* settings for using cache with main memory.
+*
+* Inputs:
+* none
+* Outputs:
+* none
+ ****************************************************************************/
+.macro AMD_DISABLE_STACK_FAMILY_HOOK
+
+ AMD_DISABLE_STACK_FAMILY_HOOK_F16
+
+.endm
+
+/****************************************************************************
+*
+* GET_NODE_ID_CORE_ID Macro - Stackless
+*
+* Read family specific values to determine the node and core
+* numbers for the core executing this code.
+*
+* Inputs:
+* none
+* Outputs:
+* SI[7:0] = Core# (0..N, relative to node)
+* SI[15:8]= Node# (0..N)
+* SI[23:16]= reserved
+* SI[24]= flag: 1=Family Unrecognized
+* SI[25]= flag: 1=Interface re-entry call
+* SI[26]= flag: 1=Core is primary of compute unit
+* SI[31:27]= reserved, =0
+****************************************************************************/
+.macro GET_NODE_ID_CORE_ID
+ LOCAL node_core_exit
+
+ mov $-1, %si
+ GET_NODE_ID_CORE_ID_F16
+
+ /*
+ * Check for unrecognized Family
+ */
+ cmp $-1, %si # Has family (node/core) already been discovered?
+ jnz node_core_exit # Br if yes
+
+ mov $((1 << FLAG_UNKNOWN_FAMILY)+(1 << FLAG_IS_PRIMARY)), %esi # No, Set error code, Only let BSP continue
+
+ mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B
+ _RDMSR
+ bt $APIC_BSC, %eax # Is this the BSC?
+ jc node_core_exit # Br if yes
+ hlt # Kill APs
+node_core_exit:
+
+.endm
+
+/*
+***************************************************************************
+ Family 16h MACROS
+***************************************************************************/
+/*--------------------------------------------------
+
+AMD_ENABLE_STACK_FAMILY_HOOK_F16 Macro - Stackless
+
+ Set any family specific controls needed to enable the use of
+ cache as general storage before main memory is available.
+
+Inputs:
+ ESI - node#, core#, flags from GET_NODE_ID_CORE_ID
+Outputs:
+ none
+Destroyed:
+ eax, ebx, ecx, edx
+
+Family 16h requirements (BKDG #48751 section 2.3.3):
+ * Paging must be disabled.
+ * MSRC001_0015[INVD_WBINVD]=0
+ * MSRC001_1020[DisSS]=1
+ * MSRC001_1021[DIS_SPEC_TLB_RLD]=1
+ * MSRC001_1022[DIS_SPEC_TLB_RLD]=1
+ * MSRC001_1022[DisHwPf]=1
+ * If MSRC001_102B[CombineCr0Cd] == 1 then MSRC001_102B[CombineCroCd] = 0
+ * No INVD or WBINVD, no exceptions, page faults or interrupts
+--------------------------------------------------
+
+ */
+
+.macro AMD_ENABLE_STACK_FAMILY_HOOK_F16
+ LOCAL fam16_enable_stack_hook_exit
+
+ AMD_CPUID $CPUID_MODEL
+ mov %eax, %ebx # Save revision info to EBX
+ shr $20, %eax # AL = cpu extended family
+ cmp $0x07, %al # Is this family 16h?
+ jnz fam16_enable_stack_hook_exit # Br if no
+
+ bt $FLAG_STACK_REENTRY , %esi # Check if stack has already been set
+ jc fam16_skipClearingBit4
+ mov $HWCR, %ecx # MSR C001_0015
+ _RDMSR
+ btr $INVD_WBINVD, %eax # disable INVD -> WBINVD conversion
+ _WRMSR
+
+fam16_skipClearingBit4:
+ mov $IC_CFG, %ecx # MSR:C001_1021
+ _RDMSR
+ bts $IC_DIS_SPEC_TLB_RLD, %eax # Turn on Disable speculative IC-TLB reloads bit
+ _WRMSR
+
+# mov %ebx, %eax # Restore revision info to EAX
+# shr $16, %eax
+# and $0x0F, %al # AL = cpu extended model
+
+ mov $DC_CFG, %ecx # MSR:C001_1022
+ _RDMSR
+ bts $DC_DIS_SPEC_TLB_WALK, %eax # Turn on Disable speculative DC-TLB reloads bit
+ bts $DIS_HW_PF, %eax # Turn on Disable hardware prefetches bit
+ _WRMSR # Remove KM in PI 1.1.0.0
+
+ mov $0x0C00110A0, %ecx # MSR:C001_10A0
+ _RDMSR
+ bts $L2_RINSER_DIS, %eax #Do not search for the repair single bit errors in the background
+ bts $PREFETCHER_DIS, %eax
+ bts $CACHE_IC_ATTR_DIS, %eax
+ _WRMSR
+
+fam16_enable_stack_hook_exit:
+.endm
+
+/*
+;
+; AMD_DISABLE_STACK_FAMILY_HOOK_F16 Macro - Stackless
+;
+; Return any family specific controls to their 'standard'
+; settings for using cache with main memory.
+;
+; Inputs:
+; ESI - [31:24] flags; [15:8]= Node#; [7:0]= core#
+; Outputs:
+; none
+; Destroyed:
+; eax, ebx, ecx, edx
+;
+; Family 16h requirements:
+; * INVD or WBINVD
+; * MSRC001_0015[INVD_WBINVD]=1
+; * MSRC001_1020[DisSS]=0
+; * MSRC001_1021[DIS_SPEC_TLB_RLD]=0
+; * MSRC001_1022[DIS_SPEC_TLB_RLD]=0
+; * MSRC001_1022[DIS_HW_PF]=0
+;---------------------------------------------------
+*/
+.macro AMD_DISABLE_STACK_FAMILY_HOOK_F16
+ LOCAL fam16_disable_stack_hook_exit
+ LOCAL fam16_disable_stack_remote_read_exit
+# LOCAL fam16_invd_done_remote_read_exit
+
+ AMD_CPUID $CPUID_MODEL
+ mov %eax, %ebx # Save revision info to EBX
+ shr $20, %eax # AL = cpu extended family
+ cmp $0x07, %al # Is this family 16h?
+ jnz fam16_disable_stack_hook_exit # Br if no
+
+ mov %ebx, %edi # Save revision info to EDI
+ AMD_CPUID $AMD_CPUID_APIC
+ mov %cl, %al # AL = number of cores - 1
+ shr $APIC_ID_CORE_ID_SIZE, %cx # CL = ApicIdCoreIdSize
+ mov $1, %bx
+ shl %cl, %bl # BL = theoretical number of cores on socket
+ dec %bx # BL = core number on socket mask
+ mov %bl, %ah # AH = core number on socket mask
+ mov %edi, %ebx # Restore revision info to EBX
+ mov %ax, %di # DI[15:8] = core number mask, DI[7:0] = number of cores - 1
+
+ and $0x0F00FF, %ebx
+ mov %ebx, %eax
+ shr $8, %eax
+ or %ax, %bx # Save Extended Model, Model and Stepping to BX
+ # [11:8] = Extended Model, [7:4] = Model, [3:0] = Stepping (bx=0000000000010100, ok)
+
+ mov $APIC_BASE_ADDRESS, %ecx
+ _RDMSR # dx=0 ax=fee00800
+ mov %bx, %dx # Save Extended Model, Model and Stepping to DX
+ shl $16, %edx #EDX[31:16] = Extended Model, Model and Stepping
+ mov %eax ,%ebx # EBX = LAPIC base
+ xor %ecx ,%ecx # Zero out CU flags
+ bts $AMD_CU_NEED_TO_WAIT, %ecx # Default to waiting
+ bts $AMD_CU_SEND_INVD_MSG, %ecx # Default to signaling
+ mov %cr0, %eax
+ bt $CR0_PE, %ax # Are we in protected mode?
+ # .if (!carry?)
+ jc 1f
+ bts $AMD_CU_RESTORE_ES, %ecx # Indicate ES restore is required
+ mov %es, %cx # Save ES segment register to CX
+ xor %ax, %ax
+ mov %ax, %es # Set ES to big real mode selector for 4GB access
+ # .endif
+
+1:
+ and $0x0F000, %bx # EBX = LAPIC base, offset 0
+ or $APIC_ID_REG, %bl #
+ mov %es:(%ebx), %eax # EAX[31:24] = APIC ID
+ shr $APIC20_APICID, %eax # AL = APIC ID
+ mov %al, %ah # AH = APIC ID
+ mov %di, %dx # DH = core mask
+ and %dh, %ah # AH = core number # ax=111 dx=01000F03
+
+ # .if (zero?)
+ jnz 1f
+ # Core 0 of a socket
+ btr $AMD_CU_SEND_INVD_MSG, %ecx # No need to signal after INVD
+ #.if (dl != 0)
+ cmp $0, %dl
+ jz 2f
+ # This socket has multiple cores
+ and $0xf000, %bx # EBX = LAPIC base, offset 0
+ or $APIC_MSG_REG, %bx
+ mov $APIC_MSG, %edi
+ mov %edi, %es:(%ebx) # Signal for non core 0s to complete CAR breakdown
+ jmp 1f
+ #.else
+2: btr $AMD_CU_NEED_TO_WAIT, %ecx # No need to wait on a single core CPU
+ #.endif
+ # .endif
+1:
+
+ bt $AMD_CU_NEED_TO_WAIT, %ecx #cx = c0000000
+ #.if (carry?)
+ jnc 1f
+ #.if (ah == dl)
+ cmp %dl, %ah
+ jnz 2f
+ # This is the highest numbered core on this socket -- wait on core 0
+ not %dh # Flip the mask to determine local core 0's APID ID
+ and %dh, %al # AL = target APIC ID # ax=310
+ jmp 3f
+2: #.else
+ # All other cores (including core 0) wait on the next highest core.
+ # In this way, cores will halt in a cascading fashion down to 0.
+ inc %al
+ #.endif
+3:
+ shl $APIC20_APICID, %eax
+ and $0x0F000, %bx
+ or $APIC_CMD_HI_REG, %bx
+ mov %eax, %es:(%ebx) # Set target APIC ID
+
+ # Use bits 23:16 as a timeout for unresponsive cores
+ ror $8, %ecx
+ mov $0xFF, %ch
+ stc
+
+ #.while (carry?)
+5: jnc 4f
+ and $0xF000, %bx #EBX = LAPIC base, offset 0
+ or $APIC_CMD_LO_REG, %bx # bx = 00000000FEE00300
+ mov $0x338, %eax
+ mov %eax, %es:(%ebx) #Fire remove read IPI
+ inc %ch #Pre increment the timeout
+ stc
+ #.while (carry?)
+7: jnc 6f
+ dec %ch #Check the timeout
+ jz fam16_disable_stack_remote_read_exit
+ mov %es:(%ebx), %eax # ax = 0000000000020338
+ bt $DELIVERY_STS_BIT, %eax
+ jmp 7b
+6: #.endw
+ stc
+ #.while (carry?)
+7: jnc 6f
+ mov %es:(%ebx), %eax
+ and $REMOTE_READ_STS, %eax
+ #.if (eax == REMOTE_DELIVERY_PEND)
+ cmp $REMOTE_DELIVERY_PEND, %eax
+ jnz 8f
+ dec %ch # Check the timeout
+ jz fam16_disable_stack_hook_exit # Branch if there is an unreponsive core
+ stc
+ jmp 9f
+8: #.else
+ clc
+9: #.endif
+ jmp 7b
+6: #.endw
+ #.if (eax == REMOTE_DELIVERY_DONE)
+ cmp $REMOTE_DELIVERY_DONE, %eax
+ jnz 6f
+ and $0x0F000, %bx #EBX = LAPIC base, offset 0
+ or $APIC_REMOTE_READ_REG, %bl
+ mov %es:(%ebx), %eax
+ #.if (eax == APIC_MSG)
+ cmp $APIC_MSG, %eax # ax=00000000FFC5BBB2
+ jnz 8f
+ clc
+ jmp 9f
+ #.else
+8: stc
+9: #.endif
+ jmp 7f
+6: #.else
+ dec %ch
+ jz fam16_disable_stack_remote_read_exit
+ stc
+7: #.endif
+ jmp 5b
+4: #.endw
+
+fam16_disable_stack_remote_read_exit:
+ rol $8, %ecx # Restore ECX
+
+1: #.endif
+
+ bt $AMD_CU_RESTORE_ES, %ecx
+ #.if (carry?)
+ jnc 1f
+ mov %cx, %es
+1:
+ mov %ecx, %edi
+ shr $16, %edx
+ mov %dx, %bx
+
+ #Handshaking complete. Continue tearing down CAR.
+
+ mov $IC_CFG, %ecx # MSR:C001_1021
+ _RDMSR
+ btr $IC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative TLB reloads
+ _WRMSR
+
+ mov $DC_CFG, %ecx # MSR:C001_1022
+ _RDMSR
+ btr $DC_DIS_SPEC_TLB_WALK, %eax # Turn on speculative table-walks
+ #.if (bx != 0) # Is this rev A0?
+ #cmp $0, %bx
+ #jz 0f
+ btr $DIS_HW_PF, %eax # Turn on hardware prefetches
+ #.endif # End workaround for erratum 498
+ #0:
+ _WRMSR
+
+ mov $0x0C00110A0, %ecx #MSR:C001_10A0
+ _RDMSR
+ btr $PREFETCHER_DIS, %eax
+ btr $CACHE_IC_ATTR_DIS, %eax
+ _WRMSR
+
+ mov $BU_CFG2, %ecx
+ _RDMSR
+ btr $F16_CL_LINES_TO_L2_DIS, %eax
+ _WRMSR
+
+ mov $HWCR, %ecx # MSR:C001_0015h
+ _RDMSR
+ btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion
+ _WRMSR
+ wbinvd # Clear the cache tag RAMs
+ #invd
+
+ #Do Standard Family 16 work
+ mov $HWCR, %ecx # MSR:C001_0015h
+ _RDMSR
+ bts $INVD_WBINVD, %eax # Turn on Conversion of INVD to WBINVD
+ _WRMSR
+ #.endif # end
+
+ bt $AMD_CU_SEND_INVD_MSG, %edi
+ #.if (carry?)
+ jnc 1f
+ AMD_CPUID $AMD_CPUID_APIC
+ shr $APIC_ID_CORE_ID_SIZE, %cx # CL = ApicIdCoreIdSize
+ mov $1, %di
+ shl %cl, %di #DI = theoretical number of cores on socket
+ dec %di # DI = core number on socket mask
+ # Non core zero needs to signal to core 0 to proceed
+ mov $APIC_BASE_ADDRESS, %ecx
+ _RDMSR
+ mov %eax, %ebx # EBX = LAPIC base
+ and $0x0F000, %bx # EBX = LAPIC base, offset 0
+ or $APIC_MSG_REG, %bx
+ mov $APIC_MSG, %eax
+ mov %eax, %es:(%ebx) # Signal for core 0 to complete CAR breakdown
+
+ #TODO: Non core zero needs to wait for core zero to do INVD
+ #A handshake is required to ensure that all cores on a node invalidate in sync.
+ and $0x0F000, %bx
+ or $APIC_ID_REG, %bl
+ mov %es:(%ebx), %eax # EAX[31:24] = APIC ID
+ shr $APIC20_APICID, %eax # AL = APIC ID
+ mov %di, %dx # Use DL as core mask
+ not %dl
+ and %dl, %al # Remote read message from core zero
+ shl $APIC20_APICID, %eax
+
+ and $0x0F000, %bx
+ or $APIC_CMD_HI_REG, %bx
+ mov %eax, %es:(%ebx) #
+ # Use bits 23:16 as a timeout for unresponsive cores
+ ror $8, %ecx
+ mov $0xFF, %ch
+ stc
+
+ #.while (carry?)
+5: jnc 4f
+ and $0xF000, %bx #EBX = LAPIC base, offset 0
+ or $APIC_CMD_LO_REG, %bx # bx = 00000000FEE00300
+ mov $0x338, %eax
+ mov %eax, %es:(%ebx) #Fire remove read IPI
+ inc %ch #Pre increment the timeout
+ stc
+ #.while (carry?)
+7: jnc 6f
+ dec %ch #Check the timeout
+ jz fam16_invd_done_remote_read_exit
+ mov %es:(%ebx), %eax # ax = 0000000000020338
+ bt $DELIVERY_STS_BIT, %eax
+ jmp 7b
+6: #.endw
+ stc
+ #.while (carry?)
+7: jnc 6f
+ mov %es:(%ebx), %eax
+ and $REMOTE_READ_STS, %eax
+ #.if (eax == REMOTE_DELIVERY_PEND)
+ cmp $REMOTE_DELIVERY_PEND, %eax
+ jnz 8f
+ dec %ch # Check the timeout
+ jz fam16_invd_done_remote_read_exit # Branch if there is an unreponsive core
+ stc
+ jmp 9f
+8: #.else
+ clc
+9: #.endif
+ jmp 7b
+6: #.endw
+ #.if (eax == REMOTE_DELIVERY_DONE)
+ cmp $REMOTE_DELIVERY_DONE, %eax
+ jnz 6f
+ and $0x0F000, %bx #EBX = LAPIC base, offset 0
+ or $APIC_REMOTE_READ_REG, %bl
+ mov %es:(%ebx), %eax
+ #.if (eax == APIC_MSG)
+ cmp $APIC_MSG, %eax # ax=00000000FFC5BBB2
+ jnz 8f
+ clc
+ jmp 9f
+ #.else
+8: stc
+9: #.endif
+ jmp 7f
+6: #.else
+ dec %ch
+ jz fam16_invd_done_remote_read_exit
+ stc
+7: #.endif
+ jmp 5b
+4: #.endw
+
+ jmp 2f
+fam16_invd_done_remote_read_exit:
+1: #.else
+ mov $APIC_BASE_ADDRESS, %ecx
+ _RDMSR
+ mov %eax, %ebx
+ and $0x0F000, %bx
+ or $APIC_MSG_REG, %bx
+ mov $APIC_INVD_ALL_DONE_MSG, %edi
+ mov %edi, %es:(%ebx)
+2: #.endif
+
+fam16_disable_stack_hook_exit:
+.endm
+
+/*
+*/
+.macro GET_NODE_ID_CORE_ID_F16
+
+ LOCAL node_core_f16_exit
+ LOCAL node_core_f16_AP
+ LOCAL node_core_f16_shared
+ LOCAL node_core_f16_AP_not_TN
+
+#define F16_L2Size 1024
+#define F16_ShareCores 4
+#define F16_AllocMem 0
+#define F16_AllocExe 0
+#define F16_SzAddrBus 40
+#define F16_pad 0
+ cmp $-1, %si # Has node/core already been discovered?
+ jnz node_core_f16_exit # Br if yes
+
+ AMD_CPUID $CPUID_MODEL
+ shr $12, %eax # AL = cpu extended family
+ cmp $07, %ah # Is this family 16h?
+ jnz node_core_f16_exit # Br if no
+ shr $4, %al # AL = cpu extended model
+ shr $16, %ebx # BH = LocalApicId
+ mov %al, %bl # BL = cpu extended model
+
+ # LoadTableAddress(FAM16H_INFO_STRUCT)
+ # movd mm5, eax # load pointer to Family Info Struc
+
+ xor %esi, %esi # Assume BSC, clear local flags
+ mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B
+ _RDMSR
+ bt $APIC_BSC, %eax # Is this the BSC?
+ jnc node_core_f16_AP # Br if no
+
+ # This is the BSP.
+ # Enable routing tables on BSP (just in case the HT init code has not yet enabled them)
+ mov $0x8000C06C, %eax # PCI address for D18F0x6C Link Initialization Control Register
+ mov $0x0CF8, %dx
+ out %eax, %dx
+ add $4, %dx
+ in %dx, %eax
+ btr $0, %eax # Set LinkInitializationControl[RouteTblDis] = 0
+ out %eax, %dx
+ jmp 6f #node_core_f16_shared #
+
+node_core_f16_AP:
+ mov %bl, %al # AL = cpu extended model
+ shr $8, %bx # BL = CPUID Fn0000_0001_EBX[LocalApicId]
+ #.if (al == 0)
+ cmp $0, %al # Is This KB?
+ jnz 5f
+ #.else
+4: mov %bx, %si
+ jmp 6f
+5: #node_core_f16_AP_not_KB
+ bts $FLAG_CORE_NOT_IDENTIFIED, %esi
+ #.endif
+ #.endif
+ #
+ # determine if this core shares MTRRs
+ #
+6: #node_core_f16_shared
+ mov $COMPUTE_UNIT_STATUS, %eax # Compute Unit Status
+ mov %si, %bx
+ shl $3, %bh # Move node# to PCI Dev# field
+ add %bh, %ah # Adjust for node number
+ mov $0x0CF8, %dx
+ out %eax, %dx
+ add $4, %dx
+ in %dx, %eax # [3:0]=Enabled# [19:16]=DualCore
+
+ # BL is MyCore#
+ mov $0x04, %cx # Use CH as 'first of pair' core#
+ #.while (cl > 0)
+ jmp 0f
+ 8:
+ bt $CU_ENABLED, %eax # Is pair enabled?
+ #.if (carry?) #
+ jnc 1f
+ mov $0x01, %bh # flag core as primary
+ #.break .if (ch == bl) # Does 1st match MyCore#?
+ cmp %bl, %ch
+ je 9f
+ #inc %ch
+ xor %bh, %bh # flag core as NOT primary
+ #
+ bt $DUAL_CORE, %eax
+ #.if (carry?)
+ jnc 5f
+ add $1, %eax
+ #.endif
+ 5:
+ bt $TRIPLE_CORE, %eax
+ jnc 5f
+ #.if (carry?)
+ add $2, %eax
+ #.endif
+ 5:
+ bt $QUAD_CORE, %eax
+ jnc 5f
+ #.if (carry?)
+ add $3, %eax
+ #.endif
+ 5:
+ #.break .if (ch >= bl) #TODO:
+ cmp %bl, %ch
+ jae 9f
+ inc %ch
+ #.endif
+ 1:
+ shr $1, %eax
+ dec %cl
+ 0:
+ cmp $0x0, %cl
+ ja 8b
+
+ #.endw
+ 9:
+
+ #.if (cl == 0)
+ or %cl, %cl
+ jne 1f
+ #Error - core# didn't match Compute Unit Status content
+ bts $FLAG_CORE_NOT_IDENTIFIED, %esi
+ bts $FLAG_IS_PRIMARY, %esi # Set Is_Primary for unknowns
+ #.endif
+ 1:
+ #.if (bh != 0) # Check state of primary for the matched core
+ or %bh, %bh
+ je 2f
+ bts $FLAG_IS_PRIMARY, %esi # Set shared flag into return value
+ #.endif
+ 2:
+
+node_core_f16_exit:
+
+.endm
+
+/*****************************************************************************
+* AMD_ENABLE_STACK: Setup a stack
+*
+* In:
+* EBX = Return address (preserved)
+*
+* Out:
+* SS:ESP - Our new private stack location
+*
+* EAX = AGESA_STATUS
+*
+* ECX = Stack size in bytes
+*
+* Requirements:
+* * This routine presently is limited to a max of 64 processor cores
+* Preserved:
+* ebx ebp
+* Destroyed:
+* eax, ecx, edx, edi, esi, ds, es, ss, esp
+* mmx0, mmx1
+*
+* Description:
+* Fixed MTRR address allocation to cores:
+* The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K.
+* There is a max of 1 BSP, 7 core0s and 56 other cores.
+* Although each core has it's own cache storage, they share the address space. Each core must
+* be assigned a private and unique address space for its stack. To support legacy systems,
+* the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved
+* for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.)
+*
+* 80000h 40000h 00000h
+* +----------+----------+----------+----------+----------+----------+----------+----------+
+* 64K | | | | | | | | | 64K ea
+* ea +----------+----------+----------+----------+----------+----------+----------+----------+
+* | MTRR 0000_0250 MTRRfix64K_00000 |
+* +----------+----------+----------+----------+----------+----------+----------+----------+
+* | 7 , 6 | 5 , 4 | 3 , 2 | 1 , 0 | 0 | | | | <-node
+* |7..1,7..1 |7..1,7..1 |7..1,7..1 |7..1,7..1 | 0 | | | | <-core
+* +----------+----------+----------+----------+----------+----------+----------+----------+
+*
+* C0000h B0000h A0000h 90000h 80000h
+* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+*16K | | | | | | | | | | | | | | | | |
+* ea +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+* | MTRR 0259 MTRRfix16K_A0000 | MTRR 0258 MTRRfix16K_80000 |
+* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+* | > Dis|play B|uffer | < | | | | | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | <-node
+* | > T| e m |p o r |a r y | B u |f f e |r A |r e a<| 0 | 0 | 0 | 0 | 0 | 0 | 0 | | <-core
+* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+
+*
+* E0000h D0000h C0000h
+* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+* 4K | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea
+* ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+* | 026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000 | 0269 MTRRfix4K_C8000 | 0268 MTRRfix4K_C0000 |
+* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+* | | | | | | | | | | | | | | | | | >| V| I| D| E| O| |B |I |O |S | |A |r |e |a<|
+* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+*
+* 100000h F0000h E0000h
+* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea
+* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+* | 026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000 | 026D MTRRfix4K_E8000 | 026C MTRRfix4K_E0000 |
+* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+* | >|MA|IN| B|IO|S |RA|NG|E | | | | | | |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE| | | | | |< |
+* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+*****************************************************************************/
+.macro AMD_ENABLE_STACK
+
+# These are local labels. Declared so linker doesn't cause 'redefined label' errors
+ LOCAL SetupStack
+ LOCAL Real16bMode
+ LOCAL Protected32Mode
+ LOCAL ClearTheStack
+
+# Note that SS:ESP will be default stack. Note that this stack
+# routine will not be used after memory has been initialized. Because
+# of its limited lifetime, it will not conflict with typical PCI devices.
+ movd %ebx, %mm0 # Put return address in a safe place
+ movd %ebp, %mm1 # Save some other user registers
+
+ # get node id and core id of current executing core
+ GET_NODE_ID_CORE_ID # Sets ESI[23:16]=Shared core## SI[15,8]= Node## SI[7,0]= core# (relative to node)
+ # Note: ESI[31:24] are used for flags: Unrecognized Family, Is_Primary core, Stack already established
+
+ # determine if stack is already enabled. We are using the DefType MSR for this determination.
+ # It is =0 after reset; CAR setup sets it to enable the MTRRs
+ mov %cr0, %eax
+ test $CR0_MASK, %eax # Is cache disabled? (CD & NW bits)
+ jnz SetupStack # Jump if yes
+ mov $AMD_MTRR_DEFTYPE, %ecx # MSR:0000_02FF
+ _RDMSR
+ test $MSR_MASK, %eax # Are the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN)
+ jz SetupStack # Jump if no
+ or $FLAG_STACK_REENTRY, %esi # Bit25, indicate stack has already been initialized
+
+SetupStack:
+ # Set node to map the first 16MB to node 0# 0000_0000 to 00FF_FFFF as DRAM
+ mov %esi, %ebx # Get my Node/Core info
+ xor %bl, %bl
+ shl $3, %bh # Isolate my node#, match alignment for PCI Dev#
+ mov $0x8000C144, %eax # D18F1x44:DRAM Base/Limit# N is Base, N+4 is Limit
+ add %bh, %ah
+ mov %eax, %ebx # Save PCI address for Base/Limit pair
+
+ mov $0x0CF8, %dx
+ out %eax, %dx
+ add $4, %dx
+ xor %eax, %eax # Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB)
+ out %eax, %dx # DRAM Limit = node0, no interleave
+
+ mov %ebx, %eax
+ sub $4, %eax # Now point to the Base register
+ mov $0x0CF8, %dx
+ out %eax, %dx
+ add $4, %dx
+ mov $0x00000003, %eax # Set the read and write enable bits
+ out %eax, %dx # DRAM Base = 0x0000, R/W
+
+ AMD_ENABLE_STACK_FAMILY_HOOK
+
+ # Init CPU MSRs for our init routines
+ mov $MTRR_SYS_CFG, %ecx # SYS_CFG
+ _RDMSR
+ bts $MTRR_FIX_DRAM_MOD_EN, %eax # Turn on modification enable bit
+ _WRMSR
+
+ mov %esi, %eax
+ bt $FLAG_STACK_REENTRY, %eax # Is this a 2nd entry?
+ #.if (!carry?) # On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP
+ jc 0f
+ bt $FLAG_IS_PRIMARY, %eax # Is this core the primary in a compute unit?
+ #.if (carry?) # Families using shared groups do not need to clear the MTRRs since that is done at power-on reset
+ # Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores
+ # Clear all variable and Fixed MTRRs for non-shared cores
+ jnc 0f
+ mov $AMD_MTRR_VARIABLE_BASE0, %ecx
+ xor %eax, %eax
+ xor %edx, %edx
+ #.while (cl != 10h) # Variable MTRRphysBase[n] and MTRRphysMask[n]
+ jmp 1f
+ 2:
+ _WRMSR
+ inc %cl
+ #.endw
+ 1:
+ cmp $0x10, %cl
+ jne 2b
+ mov $AMD_MTRR_FIX64k_00000, %cx # MSR:0000_0250
+ _WRMSR
+ mov $AMD_MTRR_FIX16k_80000, %cx # MSR:0000_0258
+ _WRMSR
+ mov $AMD_MTRR_FIX16k_A0000, %cx # MSR:0000_0259
+ _WRMSR
+ mov $AMD_MTRR_FIX4k_C0000, %cx # Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000
+ #.while (cl != 70h)
+ jmp 3f
+ 4:
+ _WRMSR
+ inc %cl
+ #.endw
+ 3:
+ cmp $0x70, %cl
+ jne 4b
+ # Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init.
+ # - not strictly needed since the FixedMTRRs take presedence.
+ mov $(16 * 1024 * 1024), %eax
+ mov $TOP_MEM, %ecx # MSR:C001_001A
+ _WRMSR
+ #.endif # End Is_Primary
+ #.endif # End Stack_ReEntry
+ 0:
+ # Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores
+ xor %eax, %eax
+ xor %edx, %edx
+ mov $IORR_BASE, %ecx # MSR:C001_0016 - 0019
+ #.while (cl != 1Ah)
+ jmp 1f
+ 2:
+ _WRMSR
+ inc %cl
+ #.endw
+ 1:
+ cmp $0x1A, %cl
+ jne 2b
+ mov $TOP_MEM2, %ecx # MSR:C001_001D
+ _WRMSR
+
+ # setup MTTRs for stacks
+ # A speculative read can be generated by a speculative fetch mis-aligned in a code zone
+ # or due to a data zone being interpreted as code. When a speculative read occurs outside a
+ # controlled region (intentionally used by software), it could cause an unwanted cache eviction.
+ # To prevent speculative reads from causing an eviction, the unused cache ranges are set
+ # to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs.
+ # Note: some core stack regions will share an MTRR since the control granularity is much
+ # larger than the allocated stack zone. The allocation algorithm must account for this 'extra'
+ # space covered by the MTRR when parseling out cache space for the various uses. In some cases
+ # this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c
+ #
+ # Outcome of this block is that: (Note the MTRR map at the top of the file)
+ # ebp - start address of stack block
+ # ebx - [31:16] - MTRR MSR address
+ # - [15:8] - slot# in MTRR register
+ # - [7:0] - block size in #4K blocks
+ # review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node)
+ #
+
+ mov %si, %ax # Load node, core
+ #.if (al == 0) # Is a core 0?
+ or %al, %al
+ jne 1f
+ #.if (ah == 0) # Is Node 0? (BSP)
+ or %ah, %ah
+ jne 2f
+ # Is BSP, assign a 64K stack
+ mov $((AMD_MTRR_FIX64k_00000 << 16) + (3 << 8) + (BSP_STACK_SIZE / 0x1000)), %ebx
+ mov $BSP_STACK_BASE_ADDR, %ebp
+ jmp 0f
+ #.else # node 1 to 7, core0
+ 2:
+ # Is a Core0 of secondary node, assign 16K stacks
+ mov $AMD_MTRR_FIX16k_80000, %bx
+ shl $16, %ebx #
+ mov %ah, %bh # Node# is used as slot#
+ mov $(CORE0_STACK_SIZE / 0x1000), %bl
+ mov %ah, %al # Base = (Node# * Size)#
+ mul %bl #
+ movzx %ax, %eax #
+ shl $12, %eax # Expand back to full byte count (* 4K)
+ add $CORE0_STACK_BASE_ADDR, %eax
+ mov %eax, %ebp
+ #.endif
+ jmp 0f
+ #.else #core 1 thru core 7
+ 1:
+ # Is core 1-7 of any node, assign 4K stacks
+ mov $8, %al # CoreIndex = ( (Node# * 8) ...
+ mul %ah #
+ mov %si, %bx #
+ add %bl, %al # ... + Core#)#
+
+ mov $AMD_MTRR_FIX64k_00000, %bx
+ shl $16, %ebx #
+ mov %al, %bh # Slot# = (CoreIndex / 16) + 4#
+ shr $4, %bh #
+ add $4, %bh #
+ mov $(CORE1_STACK_SIZE / 0x1000), %bl
+
+ mul %bl # Base = ( (CoreIndex * Size) ...
+ movzx %ax, %eax #
+ shl $12, %eax # Expand back to full byte count (* 4K)
+ add $CORE1_STACK_BASE_ADDR, %eax # ... + Base_Addr)#
+ mov %eax, %ebp
+ #.endif
+ 0:
+
+ # Now set the MTRR. Add this to already existing settings (don't clear any MTRR)
+ mov $WB_DRAM_TYPE, %edi # Load Cache type in 1st slot
+ mov %bh, %cl # ShiftCount = ((slot# ...
+ and $0x03, %cl # ... % 4) ...
+ shl $0x03, %cl # ... * 8)#
+ shl %cl, %edi # Cache type is now in correct position
+ ror $16, %ebx # Get the MTRR address
+ movzx %bx, %ecx #
+ rol $16, %ebx # Put slot# & size back in BX
+ _RDMSR # Read-modify-write the MSR
+ #.if (bh < 4) # Is value in lower or upper half of MSR?
+ cmp $4, %bh
+ jae 1f
+ or %edi, %eax #
+ jmp 0f
+ #.else
+ 1: #
+ or %edi, %edx #
+ #.endif #
+ 0:
+ _WRMSR #
+
+ # Enable MTRR defaults as UC type
+ mov $AMD_MTRR_DEFTYPE, %ecx # MSR:0000_02FF
+ _RDMSR # Read-modify-write the MSR
+ bts $MTRR_DEF_TYPE_EN, %eax # MtrrDefTypeEn
+ bts $MTRR_DEF_TYPE_FIX_EN, %eax # MtrrDefTypeFixEn
+ _WRMSR
+
+ # Close the modification window on the Fixed MTRRs
+ mov $MTRR_SYS_CFG, %ecx # MSR:0C001_0010
+ _RDMSR
+ bts $MTRR_FIX_DRAM_EN, %eax # MtrrFixDramEn
+ bts $MTRR_VAR_DRAM_EN, %eax # variable MTRR enable bit
+ btr $MTRR_FIX_DRAM_MOD_EN, %eax # Turn off modification enable bit
+ _WRMSR
+
+ # Enable caching in CR0
+ mov %cr0, %eax # Enable WT/WB cache
+ btr $CR0_PG, %eax # Make sure paging is disabled
+ btr $CR0_CD, %eax # Clear CR0 NW and CD
+ btr $CR0_NW, %eax
+ mov %eax, %cr0
+
+ # Use the Stack Base & size to calculate SS and ESP values
+ # review:
+ # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node)
+ # ebp - start address of stack block
+ # ebx - [31:16] - MTRR MSR address
+ # - [15:8] - slot# in MTRR register
+ # - [7:0] - block size in #4K blocks
+ #
+ mov %ebp, %esp # Initialize the stack pointer
+ mov %esp, %edi # Copy the stack start to edi
+ movzx %bl, %bx
+ movzx %bx, %ebx # Clear upper ebx, don't need MSR addr anymore
+ shl $12, %ebx # Make size full byte count (* 4K)
+ add %ebx, %esp # Set the Stack Pointer as full linear address
+ sub $4, %esp
+ #
+ # review:
+ # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node)
+ # edi - 32b start address of stack block
+ # ebx - size of stack block
+ # esp - 32b linear stack pointer
+ #
+
+ # Determine mode for SS base;
+ mov %cr0, %ecx # Check for 32-bit protect mode
+ bt $CR0_PE, %ecx #
+ #.if (!carry?) # PE=0 means real mode
+ jc Protected32Mode
+ mov %cs, %cx # PE=1
+ cmp $0x0D000, %cx # Check for CS
+ jb Protected32Mode # If CS < D000, it is a selector instead of a segment
+ # alter SS:ESP for 16b Real Mode:
+Real16bMode:
+ mov %edi, %eax
+ shr $4, %eax # Create a Real Mode segment for ss, ds, es
+ mov %ax, %ss
+ mov %ax, %ds
+ mov %ax, %es
+ shl $4, %eax
+ sub %eax, %edi # Adjust the clearing pointer for Seg:Offset mode
+ mov %ebx, %esp # Make SP an offset from SS
+ sub $4, %esp #
+ # .endif # endif
+ # #else
+ # Default is to use Protected 32b Mode
+ #.endif
+ ;
+Protected32Mode:
+ #
+ # Clear The Stack
+ # Now that we have set the location and the MTRRs, initialize the cache by
+ # reading then writing to zero all of the stack area.
+ # review:
+ # ss - Stack base
+ # esp - stack pointer
+ # ebx - size of stack block
+ # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node)
+ # edi - address of start of stack block
+ #
+
+ClearTheStack: # Stack base is in SS, stack pointer is in ESP
+ shr $2, %ebx # ebx = stack block size in dwords
+ mov %bx, %cx #
+ # Check our flags - Don't clear an existing stack
+ #.if ( !(esi & 0FF000000h)) # Check our flags
+ test $(1 << FLAG_STACK_REENTRY), %esi
+ jne 1f
+ cld
+ mov %edi, %esi
+ rep lodsl (%esi) # Pre-load the range
+ xor %eax, %eax
+ mov %bx, %cx
+ mov %edi, %esi # Preserve base for push on stack
+ rep stosl (%edi) # Clear the range
+ movl $0x0ABCDDCBA, (%esp) # Put marker in top stack dword
+ shl $2, %ebx # Put stack size and base
+ push %ebx # in top of stack
+ push %esi
+
+ mov %ebx, %ecx # Return size of stack in bytes
+ xor %eax, %eax # eax = 0 : no error return code
+ jmp 0f
+ #.else
+ 1:
+ movzx %cx, %ecx
+ shl $2, %ecx # Return size of stack in bytes
+ mov %esi, %eax
+ shr $24, %eax # Keep the flags as part of the error report
+ or $0x40000000, %eax # eax = AGESA_WARNING (Stack has already been set up)
+ #.endif
+ 0:
+
+ movd %mm0, %ebx # Restore return address
+ movd %mm1, %ebp
+.endm
+
+/*****************************************************************************
+* AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine
+* should only be executed on the BSP
+*
+* In:
+* none
+*
+* Out:
+* EAX = AGESA_SUCCESS
+*
+* Preserved:
+* ebx
+* Destroyed:
+* eax, ecx, edx, esp
+*****************************************************************************/
+.macro AMD_DISABLE_STACK
+
+ mov %ebx, %esp # Save return address
+
+ # get node/core/flags of current executing core
+ GET_NODE_ID_CORE_ID # Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node)
+
+ # Turn on modification enable bit
+ mov $MTRR_SYS_CFG, %ecx # MSR:C001_0010
+ _RDMSR
+ bts $MTRR_FIX_DRAM_MOD_EN, %eax # Enable modifications
+ _WRMSR
+
+ # Set lower 640K MTRRs for Write-Back memory caching
+ mov $AMD_MTRR_FIX64k_00000, %ecx
+ mov $0x1E1E1E1E, %eax
+ mov %eax, %edx
+ _WRMSR # 0 - 512K = WB Mem
+ mov $AMD_MTRR_FIX16k_80000, %ecx
+ _WRMSR # 512K - 640K = WB Mem
+
+ # Turn off modification enable bit
+ mov $MTRR_SYS_CFG, %ecx # MSR:C001_0010
+ _RDMSR
+ btr $MTRR_FIX_DRAM_MOD_EN, %eax # Disable modification
+ _WRMSR
+
+ AMD_DISABLE_STACK_FAMILY_HOOK # Re-Enable 'normal' cache operations
+
+ mov %esp, %ebx
+ xor %eax, %eax
+
+.endm
+