soc/amd/common/lpc/espi_util: use enum cb_err type for return values
Use enum cb_err as return type of all remaining functions that only
return success or failure.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6cff8480d99641fdfb613bb3e4edc4055ad5efc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
diff --git a/src/soc/amd/common/block/lpc/espi_util.c b/src/soc/amd/common/block/lpc/espi_util.c
index 70bd351..1d7be67 100644
--- a/src/soc/amd/common/block/lpc/espi_util.c
+++ b/src/soc/amd/common/block/lpc/espi_util.c
@@ -156,7 +156,7 @@
espi_write8(ESPI_IO_RANGE_SIZE(idx), size - 1);
}
-static int espi_open_generic_io_window(uint16_t base, size_t size)
+static enum cb_err espi_open_generic_io_window(uint16_t base, size_t size)
{
size_t win_size;
int idx;
@@ -186,24 +186,24 @@
printk(BIOS_ERR, "Cannot open IO window base %x size %zx\n", base,
size);
printk(BIOS_ERR, "ERROR: No more available IO windows!\n");
- return -1;
+ return CB_ERR;
}
espi_write_io_window(idx, base, win_size);
espi_enable_decode(ESPI_DECODE_IO_RANGE_EN(idx));
}
- return 0;
+ return CB_SUCCESS;
}
-int espi_open_io_window(uint16_t base, size_t size)
+enum cb_err espi_open_io_window(uint16_t base, size_t size)
{
int std_io;
std_io = espi_std_io_decode(base, size);
if (std_io != -1) {
espi_enable_decode(std_io);
- return 0;
+ return CB_SUCCESS;
} else {
return espi_open_generic_io_window(base, size);
}
@@ -248,7 +248,7 @@
espi_write16(ESPI_MMIO_RANGE_SIZE(idx), size - 1);
}
-int espi_open_mmio_window(uint32_t base, size_t size)
+enum cb_err espi_open_mmio_window(uint32_t base, size_t size)
{
size_t win_size;
int idx;
@@ -278,14 +278,14 @@
printk(BIOS_ERR, "Cannot open IO window base %x size %zx\n", base,
size);
printk(BIOS_ERR, "ERROR: No more available MMIO windows!\n");
- return -1;
+ return CB_ERR;
}
espi_write_mmio_window(idx, base, win_size);
espi_enable_decode(ESPI_DECODE_MMIO_RANGE_EN(idx));
}
- return 0;
+ return CB_SUCCESS;
}
static const struct espi_config *espi_get_config(void)
@@ -298,7 +298,7 @@
return &soc_cfg->espi_config;
}
-static int espi_configure_decodes(const struct espi_config *cfg)
+static enum cb_err espi_configure_decodes(const struct espi_config *cfg)
{
int i;
@@ -308,11 +308,11 @@
if (cfg->generic_io_range[i].size == 0)
continue;
if (espi_open_generic_io_window(cfg->generic_io_range[i].base,
- cfg->generic_io_range[i].size))
- return -1;
+ cfg->generic_io_range[i].size) != CB_SUCCESS)
+ return CB_ERR;
}
- return 0;
+ return CB_SUCCESS;
}
#define ESPI_DN_TX_HDR0 0x00
@@ -947,7 +947,7 @@
espi_write32(ESPI_GLOBAL_CONTROL_1, global_ctrl_reg);
}
-int espi_setup(void)
+enum cb_err espi_setup(void)
{
uint32_t slave_caps;
const struct espi_config *cfg = espi_get_config();
@@ -974,7 +974,7 @@
*/
if (espi_send_reset() != CB_SUCCESS) {
printk(BIOS_ERR, "Error: In-band reset failed!\n");
- return -1;
+ return CB_ERR;
}
espi_set_initial_config(cfg);
@@ -984,7 +984,7 @@
*/
if (espi_get_general_configuration(&slave_caps) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Slave GET_CONFIGURATION failed!\n");
- return -1;
+ return CB_ERR;
}
/*
@@ -994,7 +994,7 @@
*/
if (espi_set_general_configuration(cfg, slave_caps) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Slave SET_CONFIGURATION failed!\n");
- return -1;
+ return CB_ERR;
}
/*
@@ -1010,39 +1010,39 @@
/* Set up VW first so we can deassert PLTRST#. */
if (espi_setup_vw_channel(cfg, slave_caps) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Setup VW channel failed!\n");
- return -1;
+ return CB_ERR;
}
/* Assert PLTRST# if VW channel is enabled by mainboard. */
if (espi_send_pltrst(cfg, true) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: PLTRST# assertion failed!\n");
- return -1;
+ return CB_ERR;
}
/* De-assert PLTRST# if VW channel is enabled by mainboard. */
if (espi_send_pltrst(cfg, false) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: PLTRST# deassertion failed!\n");
- return -1;
+ return CB_ERR;
}
if (espi_setup_periph_channel(cfg, slave_caps) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Setup Periph channel failed!\n");
- return -1;
+ return CB_ERR;
}
if (espi_setup_oob_channel(cfg, slave_caps) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Setup OOB channel failed!\n");
- return -1;
+ return CB_ERR;
}
if (espi_setup_flash_channel(cfg, slave_caps) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Setup Flash channel failed!\n");
- return -1;
+ return CB_ERR;
}
- if (espi_configure_decodes(cfg) == -1) {
+ if (espi_configure_decodes(cfg) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Configuring decodes failed!\n");
- return -1;
+ return CB_ERR;
}
/* Enable subtractive decode if configured */
@@ -1053,7 +1053,7 @@
printk(BIOS_SPEW, "Finished initializing ESPI.\n");
- return 0;
+ return CB_SUCCESS;
}
/* Setup eSPI with any mainboard specific initialization. */