Documentation/mainboard: Move flashing instructions to common dir
Move the instructions for flashing coreboot with fwupd to common
directory as the process is identical across all models and variants.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I293acf962b32c81fdf482e0df15363e1cffa39bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
diff --git a/Documentation/mainboard/starlabs/common/flashing.md b/Documentation/mainboard/starlabs/common/flashing.md
new file mode 100644
index 0000000..b28cffb
--- /dev/null
+++ b/Documentation/mainboard/starlabs/common/flashing.md
@@ -0,0 +1,71 @@
+# Flashing with fwupd
+
+#### **Requirements:**
+
+* fwupd version 1.5.6 or later
+* The battery must be charged to at least 30%
+* The charger must be connected (either USB-C or DC Jack)
+* BIOS Lock must be disabled
+* Supported Linux distribution (Ubuntu 20.04 +, Linux Mint 20.1 + elementaryOS 6 +, Manjaro 21+)
+
+**fwupd 1.5.6 or later**
+To check the version of **fwupd** you have installed, open a terminal window and enter the below command:
+
+```
+fwupdmgr --version
+```
+
+This will show the version number. **1.5.6** or greater will work.
+
+On Ubuntu 20.04, Ubuntu 20.10, Linux Mint 20.1 and elementaryOS 6, fwupd 1.5.6 can be installed from our PPA with the below terminal commands:
+
+```
+sudo add-apt-repository ppa:starlabs/ppa
+sudo apt update
+sudo apt install fwupd
+```
+
+On Manjaro:
+
+```
+sudo pacman -Sy fwupd-git flashrom-starlabs
+```
+
+Instructions for other distributions will be added once fwupd 1.5.6 is available. If you are not using one of the distributions listed above, it is possible to install coreboot using a Live USB.
+
+**Disable BIOS Lock**
+BIOS Lock must be disabled when switching from the standard AMI (American Megatrends Inc.) firmware to coreboot. To disable BIOS Lock:
+
+1\. Start with your LabTop turned off\. Turn it on whilst holding the **F2** key to access the BIOS settings.
+2\. When the BIOS settings load, use the arrow keys to navigate to the **Advanced** tab\. Here you will see **BIOS Lock**\.
+3\. Press `Enter` to change this setting from **Enabled** to **Disabled**
+
+
+
+4\. Next, press the `F10` key to **Save & Exit** and then `Enter` to confirm.
+
+#### **Switching Branch**
+
+Switching branch refers to changing from AMI firmware to coreboot, or vice versa.
+
+First, check for new firmware files with the below terminal command:
+
+```
+fwupdmgr refresh --force
+```
+
+Then, to change branch, enter the below terminal command:
+
+```
+fwupdmgr switch-branch
+```
+
+You can then select which branch you would like to use, by typing in the corresponding number:
+
+You will be prompted to confirm, press `y` to continue or `n` to cancel.
+
+Once the switch has been completed, you will be prompted to restart.
+
+The next reboot can take up to **5 minutes,** do not interrupt this process or disconnect the charger. Once the reboot is complete, that's it - you'll continue to receive updates for whichever branch you are using.
+
+You can switch branch at any time.
diff --git a/Documentation/mainboard/starlabs/lite_glk.md b/Documentation/mainboard/starlabs/lite_glk.md
index 0fbb5f6..2b475e5 100644
--- a/Documentation/mainboard/starlabs/lite_glk.md
+++ b/Documentation/mainboard/starlabs/lite_glk.md
@@ -80,4 +80,4 @@
| External flashing | yes |
+---------------------+------------+
-Please see [here](../common/flashing.md) for instructions on how to flash with fwupd.
\ No newline at end of file
+Please see [here](../common/flashing.md) for instructions on how to flash with fwupd.
diff --git a/Documentation/mainboard/starlabs/starbook_tgl.md b/Documentation/mainboard/starlabs/starbook_tgl.md
index b69073c..fe12edc 100644
--- a/Documentation/mainboard/starlabs/starbook_tgl.md
+++ b/Documentation/mainboard/starlabs/starbook_tgl.md
@@ -83,72 +83,4 @@
| External flashing | yes |
+---------------------+------------+
-#### **Requirements:**
-
-* fwupd version 1.5.6 or later
-* The battery must be charged to at least 30%
-* The charger must be connected (either USB-C or DC Jack)
-* BIOS Lock must be disabled
-* Supported Linux distribution (Ubuntu 20.04 +, Linux Mint 20.1 + elementaryOS 6 +, Manjaro 21+)
-
-**fwupd 1.5.6 or later**
-To check the version of **fwupd** you have installed, open a terminal window and enter the below command:
-
-```
-fwupdmgr --version
-```
-
-This will show the version number. **1.5.6** or greater will work.
-
-On Ubuntu 20.04, Ubuntu 20.10, Linux Mint 20.1 and elementaryOS 6, fwupd 1.5.6 can be installed from our PPA with the below terminal commands:
-
-```
-sudo add-apt-repository ppa:starlabs/ppa
-sudo apt update
-sudo apt install fwupd
-```
-
-On Manjaro:
-
-```
-sudo pacman -Sy fwupd-git flashrom-starlabs
-```
-
-Instructions for other distributions will be added once fwupd 1.5.6 is available. If you are not using one of the distributions listed above, it is possible to install coreboot using a Live USB.
-
-**Disable BIOS Lock**
-BIOS Lock must be disabled when switching from the standard AMI (American Megatrends Inc.) firmware to coreboot. To disable BIOS Lock:
-
-1\. Start with your LabTop turned off\. Turn it on whilst holding the **F2** key to access the BIOS settings.
-2\. When the BIOS settings load, use the arrow keys to navigate to the **Advanced** tab\. Here you will see **BIOS Lock**\.
-3\. Press `Enter` to change this setting from **Enabled** to **Disabled**
-
-
-
-4\. Next, press the `F10` key to **Save & Exit** and then `Enter` to confirm.
-
-#### **Switching Branch**
-
-Switching branch refers to changing from AMI firmware to coreboot, or vice versa.
-
-First, check for new firmware files with the below terminal command:
-
-```
-fwupdmgr refresh --force
-```
-
-Then, to change branch, enter the below terminal command:
-
-```
-fwupdmgr switch-branch
-```
-
-You can then select which branch you would like to use, by typing in the corresponding number:
-
-You will be prompted to confirm, press `y` to continue or `n` to cancel.
-
-Once the switch has been completed, you will be prompted to restart.
-
-The next reboot can take up to **5 minutes,** do not interrupt this process or disconnect the charger. Once the reboot is complete, that's it - you'll continue to receive updates for whichever branch you are using.
-
-You can switch branch at any time.
+Please see [here](../common/flashing.md) for instructions on how to flash with fwupd.