sb/intel/lynxpoint: Add SerialIO UART console support
Derived from Broadwell and adapted to follow what soc/intel does. Note
that SERIALIO_UART_CONSOLE is meant to be selected from the mainboards
which expose a SerialIO UART. UART_FOR_CONSOLE also needs to be set in
mainboard Kconfig accordingly.
It is possible that some of the UART configuration steps in bootblock
are unnecessary. However, some of the steps turn off power management
features and others are undocumented: omitting them could cause weird
issues.
Finally, add a config file to ensure the code gets build-tested.
Tested on out-of-tree Compal LA-A992P, SerialIO UART 0 can be used to
receive coreboot and SeaBIOS logs.
Change-Id: Ifb3460dd50ed03421a38f03c80f91ae9fd604022
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52489
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/southbridge/intel/lynxpoint/Kconfig b/src/southbridge/intel/lynxpoint/Kconfig
index a9a2f5b..fe859f6 100644
--- a/src/southbridge/intel/lynxpoint/Kconfig
+++ b/src/southbridge/intel/lynxpoint/Kconfig
@@ -68,4 +68,15 @@
bool
default y
+config SERIALIO_UART_CONSOLE
+ bool "Use SerialIO UART for console"
+ depends on INTEL_LYNXPOINT_LP
+ select DRIVERS_UART_8250MEM_32
+ help
+ Selected by mainboards where SerialIO UARTs can be used to retrieve
+ coreboot logs. Boards also need to set UART_FOR_CONSOLE accordingly.
+
+config CONSOLE_UART_BASE_ADDRESS
+ default 0xd6000000 if SERIALIO_UART_CONSOLE
+
endif
diff --git a/src/southbridge/intel/lynxpoint/Makefile.inc b/src/southbridge/intel/lynxpoint/Makefile.inc
index 2923035..02022d34 100644
--- a/src/southbridge/intel/lynxpoint/Makefile.inc
+++ b/src/southbridge/intel/lynxpoint/Makefile.inc
@@ -42,6 +42,10 @@
ramstage-y += lp_gpio.c
smm-y += lp_gpio.c
verstage-y += lp_gpio.c
+bootblock-$(CONFIG_SERIALIO_UART_CONSOLE) += uart_init.c
+bootblock-$(CONFIG_SERIALIO_UART_CONSOLE) += iobp.c
+all-$(CONFIG_SERIALIO_UART_CONSOLE) += uart.c
+smm-$(CONFIG_SERIALIO_UART_CONSOLE) += uart.c
endif
verstage-y += pmutil.c
diff --git a/src/southbridge/intel/lynxpoint/bootblock.c b/src/southbridge/intel/lynxpoint/bootblock.c
index c063bfb..495871c 100644
--- a/src/southbridge/intel/lynxpoint/bootblock.c
+++ b/src/southbridge/intel/lynxpoint/bootblock.c
@@ -51,4 +51,7 @@
pch_enable_lpc();
mainboard_config_superio();
+
+ if (CONFIG(SERIALIO_UART_CONSOLE))
+ uart_bootblock_init();
}
diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h
index 7b09d54..598c2dc 100644
--- a/src/southbridge/intel/lynxpoint/pch.h
+++ b/src/southbridge/intel/lynxpoint/pch.h
@@ -157,6 +157,7 @@
void enable_usb_bar(void);
void early_pch_init(void);
void pch_enable_lpc(void);
+void uart_bootblock_init(void);
void mainboard_config_superio(void);
void mainboard_config_rcba(void);
@@ -372,6 +373,9 @@
#define SIO_REG_PPR_CLOCK 0x800
#define SIO_REG_PPR_CLOCK_EN (1 << 0)
+#define SIO_REG_PPR_CLOCK_UPDATE (1 << 31)
+#define SIO_REG_PPR_CLOCK_M_DIV 0x25a
+#define SIO_REG_PPR_CLOCK_N_DIV 0x7fff
#define SIO_REG_PPR_RST 0x804
#define SIO_REG_PPR_RST_ASSERT 0x3
#define SIO_REG_PPR_GEN 0x808
diff --git a/src/southbridge/intel/lynxpoint/serialio.c b/src/southbridge/intel/lynxpoint/serialio.c
index 05263fe..34f8c78 100644
--- a/src/southbridge/intel/lynxpoint/serialio.c
+++ b/src/southbridge/intel/lynxpoint/serialio.c
@@ -8,6 +8,7 @@
#include <device/pci.h>
#include <device/pci_ids.h>
#include <soc/nvs.h>
+#include <types.h>
#include "chip.h"
#include "iobp.h"
#include "pch.h"
@@ -20,6 +21,19 @@
write32(res2mmio(bar0, SIO_REG_PPR_CLOCK, 0), reg32);
}
+static bool serialio_uart_is_debug(struct device *dev)
+{
+ if (CONFIG(SERIALIO_UART_CONSOLE)) {
+ switch (dev->path.pci.devfn) {
+ case PCH_DEVFN_UART0:
+ return CONFIG_UART_FOR_CONSOLE == 0;
+ case PCH_DEVFN_UART1:
+ return CONFIG_UART_FOR_CONSOLE == 1;
+ }
+ }
+ return 0;
+}
+
/* Put Serial IO D21:F0-F6 device into desired mode. */
static void serialio_d21_mode(int sio_index, int int_pin, int acpi_mode)
{
@@ -197,13 +211,15 @@
break;
case PCH_DEVFN_UART0: /* UART0 */
sio_index = SIO_ID_UART0;
- serialio_d21_ltr(bar0);
+ if (!serialio_uart_is_debug(dev))
+ serialio_d21_ltr(bar0);
serialio_d21_mode(sio_index, SIO_PIN_INTD,
config->sio_acpi_mode);
break;
case PCH_DEVFN_UART1: /* UART1 */
sio_index = SIO_ID_UART1;
- serialio_d21_ltr(bar0);
+ if (!serialio_uart_is_debug(dev))
+ serialio_d21_ltr(bar0);
serialio_d21_mode(sio_index, SIO_PIN_INTD,
config->sio_acpi_mode);
break;
@@ -221,8 +237,21 @@
update_bars(sio_index, (u32)bar0->base, (u32)bar1->base);
}
+static void serialio_read_resources(struct device *dev)
+{
+ pci_dev_read_resources(dev);
+
+ /* Set the configured UART base address for the debug port */
+ if (CONFIG(SERIALIO_UART_CONSOLE) && serialio_uart_is_debug(dev)) {
+ struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ res->base = CONFIG_CONSOLE_UART_BASE_ADDRESS;
+ res->size = 0x1000;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+ }
+}
+
static struct device_operations device_ops = {
- .read_resources = pci_dev_read_resources,
+ .read_resources = serialio_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = serialio_init,
diff --git a/src/southbridge/intel/lynxpoint/uart.c b/src/southbridge/intel/lynxpoint/uart.c
new file mode 100644
index 0000000..95b286e
--- /dev/null
+++ b/src/southbridge/intel/lynxpoint/uart.c
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <console/uart.h>
+#include <types.h>
+
+uintptr_t uart_platform_base(unsigned int idx)
+{
+ if (idx == CONFIG_UART_FOR_CONSOLE)
+ return CONFIG_CONSOLE_UART_BASE_ADDRESS;
+
+ return 0;
+}
diff --git a/src/southbridge/intel/lynxpoint/uart_init.c b/src/southbridge/intel/lynxpoint/uart_init.c
new file mode 100644
index 0000000..66b9e01
--- /dev/null
+++ b/src/southbridge/intel/lynxpoint/uart_init.c
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <arch/io.h>
+#include <arch/mmio.h>
+#include <assert.h>
+#include <console/uart.h>
+#include <device/pci_def.h>
+#include <device/pci_ops.h>
+#include <southbridge/intel/lynxpoint/iobp.h>
+#include <southbridge/intel/lynxpoint/lp_gpio.h>
+#include <southbridge/intel/lynxpoint/pch.h>
+#include <types.h>
+
+static pci_devfn_t get_uart_pci_device(void)
+{
+ switch (CONFIG_UART_FOR_CONSOLE) {
+ case 0: return PCI_DEV(0, 0x15, 5);
+ case 1: return PCI_DEV(0, 0x15, 6);
+ default: return dead_code_t(pci_devfn_t);
+ }
+}
+
+/* TODO: Figure out if all steps are actually necessary */
+void uart_bootblock_init(void)
+{
+ const pci_devfn_t dev = get_uart_pci_device();
+
+ /* Program IOBP GPIODF */
+ pch_iobp_update(SIO_IOBP_GPIODF, ~0x131f, 0x131f);
+
+ /* Program IOBP CB000180h[5:0] = 111111b (undefined register) */
+ pch_iobp_update(0xcb000180, ~0x0000003f, 0x0000003f);
+
+ /* Set and enable MMIO BAR */
+ pci_write_config32(dev, PCI_BASE_ADDRESS_0, CONFIG_CONSOLE_UART_BASE_ADDRESS);
+ pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MEMORY);
+
+ void *const bar = (void *)(uintptr_t)CONFIG_CONSOLE_UART_BASE_ADDRESS;
+
+ /* Initialize LTR */
+ clrbits32(bar + SIO_REG_PPR_GEN, SIO_REG_PPR_GEN_LTR_MODE_MASK);
+ clrbits32(bar + SIO_REG_PPR_RST, SIO_REG_PPR_RST_ASSERT);
+
+ /* Take UART out of reset */
+ setbits32(bar + SIO_REG_PPR_RST, SIO_REG_PPR_RST_ASSERT);
+
+ /* Set M and N divisor inputs and enable clock */
+ uint32_t ppr_clock = 0;
+ ppr_clock |= SIO_REG_PPR_CLOCK_EN;
+ ppr_clock |= SIO_REG_PPR_CLOCK_UPDATE;
+ ppr_clock |= SIO_REG_PPR_CLOCK_N_DIV << 16;
+ ppr_clock |= SIO_REG_PPR_CLOCK_M_DIV << 1;
+ write32(bar + SIO_REG_PPR_CLOCK, ppr_clock);
+}