soc/intel/apollolake: Disable XHCI LFPS power management
Provide the option to disable XHCI LFPS power management.
If the option is set in the devicetree, the bits[7:4] in
XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated
from default 9 to 0.
BUG=b:146768983
BRANCH=None
TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash
the image to the device. Run following command to check if
bits[7:4] is set 0:
>iotools mmio_read32 "XHCI MMIO BAR + 0x80A4"
Signed-off-by: Marx Wang <marx.wang@intel.com>
Change-Id: Ic603e3b919d8b443c6ede8bb5e46e2de07fcb856
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
diff --git a/src/soc/intel/apollolake/chip.c b/src/soc/intel/apollolake/chip.c
index 1075642..c4e068d4 100644
--- a/src/soc/intel/apollolake/chip.c
+++ b/src/soc/intel/apollolake/chip.c
@@ -99,6 +99,10 @@
/* IOSF Gasket Backbone Local Clock Gating Enable */
#define IOSFGBLCGE (1 << 0)
+#define CFG_XHCPMCTRL 0x80a4
+/* BIT[7:4] LFPS periodic sampling for USB3 Ports */
+#define LFPS_PM_DISABLE_MASK 0xFFFFFF0F
+
const char *soc_acpi_name(const struct device *dev)
{
if (dev->path.type == DEVICE_PATH_DOMAIN)
@@ -829,6 +833,30 @@
return !!dev->enabled;
}
+static void disable_xhci_lfps_pm(void)
+{
+ struct soc_intel_apollolake_config *cfg;
+
+ cfg = config_of_soc();
+
+ if (cfg->disable_xhci_lfps_pm) {
+ void *addr;
+ const struct resource *res;
+ uint32_t reg;
+ struct device *xhci_dev = PCH_DEV_XHCI;
+
+ res = find_resource(xhci_dev, PCI_BASE_ADDRESS_0);
+ addr = (void *)(uintptr_t)(res->base + CFG_XHCPMCTRL);
+ reg = read32(addr);
+ printk(BIOS_DEBUG, "XHCI PM: control reg=0x%x.\n", reg);
+ if (reg) {
+ reg &= LFPS_PM_DISABLE_MASK;
+ write32(addr, reg);
+ printk(BIOS_INFO, "XHCI PM: Disable xHCI LFPS as configured in devicetree.\n");
+ }
+ }
+}
+
void platform_fsp_notify_status(enum fsp_notify_phase phase)
{
if (phase == END_OF_FIRMWARE) {
@@ -876,6 +904,9 @@
IOSFGBLCGE;
write32(cfg, reg);
}
+
+ /* Disable XHCI LFPS power management if the option in dev tree is set. */
+ disable_xhci_lfps_pm();
}
}