diff --git a/src/mainboard/google/brya/variants/yavilla/overridetree.cb b/src/mainboard/google/brya/variants/yavilla/overridetree.cb
index d31a8f9..ee5a3b6 100644
--- a/src/mainboard/google/brya/variants/yavilla/overridetree.cb
+++ b/src/mainboard/google/brya/variants/yavilla/overridetree.cb
@@ -375,12 +375,11 @@
 				register "gpio_panel.gpio[2].gpio_num" = "GPP_D3"   # WCAM_RST_L
 
 				#_ON
-				register "on_seq.ops_cnt" = "5"
+				register "on_seq.ops_cnt" = "4"
 				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
 				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
 				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
-				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
-				register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
+				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
 
 				#_OFF
 				register "off_seq.ops_cnt" = "4"
@@ -400,6 +399,22 @@
 				register "device_type" = "INTEL_ACPI_CAMERA_VCM"
 
 				register "vcm_compat" = ""dongwoon,dw9714""
+				register "has_power_resource" = "1"
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D15"  # EN_PP2800_WCAM_X
+				register "gpio_panel.gpio[1].gpio_num" = "GPP_D3"   # WCAM_RST_L
+
+				#_ON
+				register "on_seq.ops_cnt" = "2"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "2"
+				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
 
 				device i2c 0C on
 					probe WFC WFC_MIPI_OVTI8856