Convert all Intel i810 boards to CAR.
- Drop "select ROMCC" from the boards, as well as early_mtrr stuff.
- Add "select CACHE_AS_RAM" to socket_PGA370/Kconfig, as well as the
usual DCACHE_RAM_BASE and DCACHE_RAM_SIZE variables.
- In socket_PGA370/Makefile.inc add:
cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc
- Other smaller related fixes.
Abuild-tested and boot-tested on MSI MS-6178.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5949 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/mainboard/intel/d810e2cb/romstage.c b/src/mainboard/intel/d810e2cb/romstage.c
index 34371f5..94f1170 100644
--- a/src/mainboard/intel/d810e2cb/romstage.c
+++ b/src/mainboard/intel/d810e2cb/romstage.c
@@ -35,21 +35,15 @@
#include "cpu/x86/bist.h"
#include "superio/smsc/smscsuperio/smscsuperio_early_serial.c"
#include "gpio.c"
+#include "northbridge/intel/i82810/raminit.c"
+/* #include "northbridge/intel/i82810/debug.c" */
#include <lib.h>
#define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1)
-static inline int spd_read_byte(unsigned int device, unsigned int address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/intel/i82810/raminit.c"
-/* #include "northbridge/intel/i82810/debug.c" */
-
void main(unsigned long bist)
{
- /* Set southbridge and superio gpios */
+ /* Set southbridge and Super I/O GPIOs. */
mb_gpio_init();
smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
@@ -62,6 +56,4 @@
sdram_set_registers();
sdram_set_spd_registers();
sdram_enable();
- /* ram_check(0, 640 * 1024); */
}
-