blob: b27404e6e7424427f7d56702d742f9aa79e98112 [file] [log] [blame]
/* This should be done by Eric
2004.12 yhlu add dual core support
2005.01 yhlu add support move apic before pci_domain in MB devicetree.cb
2005.02 yhlu add e0 memory hole support
2005.11 yhlu add put sb ht chain on bus 0
*/
#include <console/console.h>
#include <arch/io.h>
#include <stdint.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/hypertransport.h>
#include <stdlib.h>
#include <string.h>
#include <lib.h>
#include <cpu/cpu.h>
#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES)
#include <arch/acpi.h>
#include "acpi.h"
#endif
#include <cpu/x86/lapic.h>
#include <cpu/amd/mtrr.h>
#include <cpu/amd/multicore.h>
#if CONFIG_LOGICAL_CPUS
#include <pc80/mc146818rtc.h>
#endif
#include "northbridge.h"
#include "amdk8.h"
#include <cpu/amd/model_fxx_rev.h>
#include <cpu/amd/amdk8_sysconf.h>
struct amdk8_sysconf_t sysconf;
#define MAX_FX_DEVS 8
static device_t __f0_dev[MAX_FX_DEVS];
static device_t __f1_dev[MAX_FX_DEVS];
static unsigned fx_devs=0;
static void get_fx_devs(void)
{
int i;
for(i = 0; i < MAX_FX_DEVS; i++) {
__f0_dev[i] = dev_find_slot(0, PCI_DEVFN(0x18 + i, 0));
__f1_dev[i] = dev_find_slot(0, PCI_DEVFN(0x18 + i, 1));
if (__f0_dev[i] != NULL && __f1_dev[i] != NULL)
fx_devs = i+1;
}
if (__f1_dev[0] == NULL || __f0_dev[0] == NULL || fx_devs == 0) {
die("Cannot find 0:0x18.[0|1]\n");
}
}
static u32 f1_read_config32(unsigned reg)
{
if (fx_devs == 0)
get_fx_devs();
return pci_read_config32(__f1_dev[0], reg);
}
static void f1_write_config32(unsigned reg, u32 value)
{
int i;
if (fx_devs == 0)
get_fx_devs();
for(i = 0; i < fx_devs; i++) {
device_t dev;
dev = __f1_dev[i];
if (dev && dev->enabled) {
pci_write_config32(dev, reg, value);
}
}
}
static bool is_non_coherent_link(struct device *dev, struct bus *link)
{
u32 link_type;
do {
link_type = pci_read_config32(dev, link->cap + 0x18);
} while (link_type & ConnectionPending);
if (!(link_type & LinkConnected))
return false;
do {
link_type = pci_read_config32(dev, link->cap + 0x18);
} while (!(link_type & InitComplete));
return !!(link_type & NonCoherent);
}
typedef enum {
HT_ROUTE_CLOSE,
HT_ROUTE_SCAN,
HT_ROUTE_FINAL,
} scan_state;
static void ht_route_link(struct bus *link, scan_state mode)
{
struct device *dev = link->dev;
struct bus *parent = dev->bus;
u32 busses;
/* Configure the bus numbers for this bridge: the configuration
* transactions will not be propagated by the bridge if it is
* not correctly configured
*/
busses = pci_read_config32(link->dev, link->cap + 0x14);
busses &= 0xff000000;
busses |= parent->secondary & 0xff;
if (mode == HT_ROUTE_CLOSE) {
busses |= 0xfeff << 8;
} else if (mode == HT_ROUTE_SCAN) {
busses |= ((u32) link->secondary & 0xff) << 8;
busses |= 0xff << 16;
} else if (mode == HT_ROUTE_FINAL) {
busses |= ((u32) link->secondary & 0xff) << 8;
busses |= ((u32) link->subordinate & 0xff) << 16;
}
pci_write_config32(link->dev, link->cap + 0x14, busses);
}
static u32 amdk8_nodeid(device_t dev)
{
return (dev->path.pci.devfn >> 3) - 0x18;
}
static u32 amdk8_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool is_sblink,
u32 max)
{
int i;
unsigned int next_unitid;
u32 config_busses;
u32 free_reg, config_reg;
u32 ht_unitid_base[4]; // here assume only 4 HT device on chain
u32 min_bus;
u32 max_devfn;
link->cap = 0x80 + (link->link_num * 0x20);
if (!is_non_coherent_link(dev, link))
return max;
/* See if there is an available configuration space mapping
* register in function 1.
*/
free_reg = 0;
for(config_reg = 0xe0; config_reg <= 0xec; config_reg += 4) {
u32 config;
config = f1_read_config32(config_reg);
if (!free_reg && ((config & 3) == 0)) {
free_reg = config_reg;
continue;
}
if (((config & 3) == 3) &&
(((config >> 4) & 7) == nodeid) &&
(((config >> 8) & 3) == link->link_num)) {
break;
}
}
if (free_reg && (config_reg > 0xec)) {
config_reg = free_reg;
}
/* If we can't find an available configuration space mapping
* register skip this bus
*/
if (config_reg > 0xec) {
return max;
}
/* Set up the primary, secondary and subordinate bus numbers.
* We have no idea how many busses are behind this bridge yet,
* so we set the subordinate bus number to 0xff for the moment.
*/
if (CONFIG_SB_HT_CHAIN_ON_BUS0 == 0) {
min_bus = ++max;
} else if (is_sblink) {
// first chain will on bus 0
min_bus = max; /* actually max is 0 here */
} else if (CONFIG_SB_HT_CHAIN_ON_BUS0 == 1) {
min_bus = ++max;
} else if (CONFIG_SB_HT_CHAIN_ON_BUS0 > 1) {
/* Second chain will be on 0x40, third 0x80, forth 0xc0. */
min_bus = (max & ~0x3f) + 0x40;
max = min_bus;
}
link->secondary = min_bus;
link->subordinate = link->secondary;
ht_route_link(link, HT_ROUTE_SCAN);
config_busses = f1_read_config32(config_reg);
config_busses &= 0x000fc88;
config_busses |=
(3 << 0) | /* rw enable, no device compare */
(( nodeid & 7) << 4) |
((link->link_num & 3) << 8) |
((link->secondary) << 16) |
(0xff << 24);
f1_write_config32(config_reg, config_busses);
/* Now we can scan all of the subordinate busses i.e. the
* chain on the hypertranport link
*/
for(i=0;i<4;i++) {
ht_unitid_base[i] = 0x20;
}
if (min_bus == 0)
max_devfn = (0x17<<3) | 7;
else
max_devfn = (0x1f<<3) | 7;
next_unitid = hypertransport_scan_chain(link, 0, max_devfn, ht_unitid_base, offset_unit_id(is_sblink));
/* Now that nothing is overlapping it is safe to scan the children. */
pci_scan_bus(link, 0x00, ((next_unitid - 1) << 3) | 7);
/* We know the number of busses behind this bridge. Set the
* subordinate bus number to it's real value
*/
ht_route_link(link, HT_ROUTE_FINAL);
config_busses = (config_busses & 0x00ffffff) |
(link->subordinate << 24);
f1_write_config32(config_reg, config_busses);
{
// use config_reg and ht_unitid_base to update hcdn_reg
int index;
u32 temp = 0;
index = (config_reg-0xe0) >> 2;
for(i=0;i<4;i++) {
temp |= (ht_unitid_base[i] & 0xff) << (i*8);
}
sysconf.hcdn_reg[index] = temp;
}
return link->subordinate;
}
static void amdk8_scan_chains(device_t dev)
{
unsigned nodeid;
struct bus *link;
unsigned sblink = 0;
unsigned int max = dev->bus->subordinate;
nodeid = amdk8_nodeid(dev);
if (nodeid == 0)
sblink = (pci_read_config32(dev, 0x64)>>8) & 3;
// do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0
for (link = dev->link_list; link; link = link->next) {
bool is_sblink = (nodeid == 0) && (link->link_num == sblink);
if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 0) && is_sblink)
max = amdk8_scan_chain(dev, nodeid, link, is_sblink, max);
}
for (link = dev->link_list; link; link = link->next) {
bool is_sblink = (nodeid == 0) && (link->link_num == sblink);
if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 0) && is_sblink)
continue;
max = amdk8_scan_chain(dev, nodeid, link, is_sblink, max);
}
dev->bus->subordinate = max;
}
static int reg_useable(unsigned reg, device_t goal_dev, unsigned goal_nodeid,
unsigned goal_link)
{
struct resource *res;
unsigned nodeid, link = 0;
int result;
res = 0;
for(nodeid = 0; !res && (nodeid < fx_devs); nodeid++) {
device_t dev;
dev = __f0_dev[nodeid];
if (!dev)
continue;
for(link = 0; !res && (link < 3); link++) {
res = probe_resource(dev, IOINDEX(0x100 + reg, link));
}
}
result = 2;
if (res) {
result = 0;
if ( (goal_link == (link - 1)) &&
(goal_nodeid == (nodeid - 1)) &&
(res->flags <= 1)) {
result = 1;
}
}
return result;
}
static unsigned amdk8_find_reg(device_t dev, unsigned nodeid, unsigned link,
unsigned min, unsigned max)
{
unsigned resource;
unsigned free_reg, reg;
resource = 0;
free_reg = 0;
for(reg = min; reg <= max; reg += 0x8) {
int result;
result = reg_useable(reg, dev, nodeid, link);
if (result == 1) {
/* I have been allocated this one */
break;
}
else if (result > 1) {
/* I have a free register pair */
free_reg = reg;
}
}
if (reg > max) {
reg = free_reg;
}
if (reg > 0) {
resource = IOINDEX(0x100 + reg, link);
}
return resource;
}
static unsigned amdk8_find_iopair(device_t dev, unsigned nodeid, unsigned link)
{
return amdk8_find_reg(dev, nodeid, link, 0xc0, 0xd8);
}
static unsigned amdk8_find_mempair(device_t dev, unsigned nodeid, unsigned link)
{
return amdk8_find_reg(dev, nodeid, link, 0x80, 0xb8);
}
static void amdk8_link_read_bases(device_t dev, unsigned nodeid, unsigned link)
{
struct resource *resource;
/* Initialize the io space constraints on the current bus */
resource = new_resource(dev, IOINDEX(0, link));
if (resource) {
resource->base = 0;
resource->size = 0;
resource->align = log2(HT_IO_HOST_ALIGN);
resource->gran = log2(HT_IO_HOST_ALIGN);
resource->limit = 0xffffUL;
resource->flags = IORESOURCE_IO | IORESOURCE_BRIDGE;
}
/* Initialize the prefetchable memory constraints on the current bus */
resource = new_resource(dev, IOINDEX(2, link));
if (resource) {
resource->base = 0;
resource->size = 0;
resource->align = log2(HT_MEM_HOST_ALIGN);
resource->gran = log2(HT_MEM_HOST_ALIGN);
resource->limit = 0xffffffffffULL;
resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
resource->flags |= IORESOURCE_BRIDGE;
}
/* Initialize the memory constraints on the current bus */
resource = new_resource(dev, IOINDEX(1, link));
if (resource) {
resource->base = 0;
resource->size = 0;
resource->align = log2(HT_MEM_HOST_ALIGN);
resource->gran = log2(HT_MEM_HOST_ALIGN);
resource->limit = 0xffffffffULL;
resource->flags = IORESOURCE_MEM | IORESOURCE_BRIDGE;
}
}
static void amdk8_create_vga_resource(device_t dev, unsigned nodeid);
static void amdk8_read_resources(device_t dev)
{
unsigned nodeid;
struct bus *link;
nodeid = amdk8_nodeid(dev);
for(link = dev->link_list; link; link = link->next) {
if (link->children) {
amdk8_link_read_bases(dev, nodeid, link->link_num);
}
}
amdk8_create_vga_resource(dev, nodeid);
}
static void amdk8_set_resource(device_t dev, struct resource *resource, unsigned nodeid)
{
struct bus *link;
resource_t rbase, rend;
unsigned reg, link_num;
char buf[50];
/* Make certain the resource has actually been set */
if (!(resource->flags & IORESOURCE_ASSIGNED)) {
printk(BIOS_ERR, "%s: can't set unassigned resource @%lx %lx\n",
__func__, resource->index, resource->flags);
return;
}
/* If I have already stored this resource don't worry about it */
if (resource->flags & IORESOURCE_STORED) {
printk(BIOS_ERR, "%s: can't set stored resource @%lx %lx\n", __func__,
resource->index, resource->flags);
return;
}
/* Only handle PCI memory and IO resources */
if (!(resource->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
return;
/* Ensure I am actually looking at a resource of function 1 */
if (resource->index < 0x100) {
return;
}
if (resource->size == 0)
return;
/* Get the base address */
rbase = resource->base;
/* Get the limit (rounded up) */
rend = resource_end(resource);
/* Get the register and link */
reg = resource->index & 0xfc;
link_num = IOINDEX_LINK(resource->index);
for (link = dev->link_list; link; link = link->next)
if (link->link_num == link_num)
break;
if (link == NULL) {
printk(BIOS_ERR, "%s: can't find link %x for %lx\n", __func__,
link_num, resource->index);
return;
}
if (resource->flags & IORESOURCE_IO) {
u32 base, limit;
base = f1_read_config32(reg);
limit = f1_read_config32(reg + 0x4);
base &= 0xfe000fcc;
base |= rbase & 0x01fff000;
base |= 3;
limit &= 0xfe000fc8;
limit |= rend & 0x01fff000;
limit |= (link_num & 3) << 4;
limit |= (nodeid & 7);
if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) {
printk(BIOS_SPEW, "%s, enabling legacy VGA IO forwarding for %s link 0x%x\n",
__func__, dev_path(dev), link_num);
base |= PCI_IO_BASE_VGA_EN;
}
if (link->bridge_ctrl & PCI_BRIDGE_CTL_NO_ISA) {
base |= PCI_IO_BASE_NO_ISA;
}
f1_write_config32(reg + 0x4, limit);
f1_write_config32(reg, base);
}
else if (resource->flags & IORESOURCE_MEM) {
u32 base, limit;
base = f1_read_config32(reg);
limit = f1_read_config32(reg + 0x4);
base &= 0x000000f0;
base |= (rbase >> 8) & 0xffffff00;
base |= 3;
limit &= 0x00000048;
limit |= (rend >> 8) & 0xffffff00;
limit |= (link_num & 3) << 4;
limit |= (nodeid & 7);
f1_write_config32(reg + 0x4, limit);
f1_write_config32(reg, base);
}
resource->flags |= IORESOURCE_STORED;
snprintf(buf, sizeof (buf), " <node %x link %x>",
nodeid, link_num);
report_resource_stored(dev, resource, buf);
}
static void amdk8_create_vga_resource(device_t dev, unsigned nodeid)
{
struct resource *resource;
struct bus *link;
/* find out which link the VGA card is connected,
* we only deal with the 'first' vga card */
for (link = dev->link_list; link; link = link->next) {
if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) {
#if CONFIG_MULTIPLE_VGA_ADAPTERS
extern device_t vga_pri; // the primary vga device, defined in device.c
printk(BIOS_DEBUG, "VGA: vga_pri bus num = %d link bus range [%d,%d]\n", vga_pri->bus->secondary,
link->secondary,link->subordinate);
/* We need to make sure the vga_pri is under the link */
if((vga_pri->bus->secondary >= link->secondary ) &&
(vga_pri->bus->secondary <= link->subordinate )
)
#endif
break;
}
}
/* no VGA card installed */
if (link == NULL)
return;
printk(BIOS_DEBUG, "VGA: %s (aka node %d) link %d has VGA device\n", dev_path(dev), nodeid, link->link_num);
/* allocate a temp resource for the legacy VGA buffer */
resource = new_resource(dev, IOINDEX(4, link->link_num));
if(!resource){
printk(BIOS_DEBUG, "VGA: %s out of resources.\n", dev_path(dev));
return;
}
resource->base = 0xa0000;
resource->size = 0x20000;
resource->limit = 0xffffffff;
resource->flags = IORESOURCE_FIXED | IORESOURCE_MEM |
IORESOURCE_ASSIGNED;
}
static void amdk8_set_resources(device_t dev)
{
unsigned nodeid;
struct bus *bus;
struct resource *res;
/* Find the nodeid */
nodeid = amdk8_nodeid(dev);
/* Set each resource we have found */
for(res = dev->resource_list; res; res = res->next) {
struct resource *old = NULL;
unsigned index;
if (res->size == 0) /* No need to allocate registers. */
continue;
if (res->flags & IORESOURCE_IO)
index = amdk8_find_iopair(dev, nodeid,
IOINDEX_LINK(res->index));
else
index = amdk8_find_mempair(dev, nodeid,
IOINDEX_LINK(res->index));
old = probe_resource(dev, index);
if (old) {
res->index = old->index;
old->index = 0;
old->flags = 0;
}
else
res->index = index;
amdk8_set_resource(dev, res, nodeid);
}
compact_resources(dev);
for(bus = dev->link_list; bus; bus = bus->next) {
if (bus->children) {
assign_resources(bus);
}
}
}
static void mcf0_control_init(struct device *dev)
{
#if 0
printk(BIOS_DEBUG, "NB: Function 0 Misc Control.. ");
#endif
#if 0
printk(BIOS_DEBUG, "done.\n");
#endif
}
static struct device_operations northbridge_operations = {
.read_resources = amdk8_read_resources,
.set_resources = amdk8_set_resources,
.enable_resources = pci_dev_enable_resources,
#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES)
.acpi_fill_ssdt_generator = k8acpi_write_vars,
.write_acpi_tables = northbridge_write_acpi_tables,
#endif
.init = mcf0_control_init,
.scan_bus = amdk8_scan_chains,
.enable = 0,
.ops_pci = 0,
};
static const struct pci_driver mcf0_driver __pci_driver = {
.ops = &northbridge_operations,
.vendor = PCI_VENDOR_ID_AMD,
.device = 0x1100,
};
struct chip_operations northbridge_amd_amdk8_ops = {
CHIP_NAME("AMD K8 Northbridge")
.enable_dev = 0,
};
static void amdk8_domain_read_resources(device_t dev)
{
unsigned reg;
/* Find the already assigned resource pairs */
get_fx_devs();
for(reg = 0x80; reg <= 0xd8; reg+= 0x08) {
u32 base, limit;
base = f1_read_config32(reg);
limit = f1_read_config32(reg + 0x04);
/* Is this register allocated? */
if ((base & 3) != 0) {
unsigned nodeid, reg_link;
device_t reg_dev;
nodeid = limit & 7;
reg_link = (limit >> 4) & 3;
reg_dev = __f0_dev[nodeid];
if (reg_dev) {
/* Reserve the resource */
struct resource *res;
res = new_resource(reg_dev, IOINDEX(0x100 + reg, reg_link));
if (res) {
res->base = base;
res->limit = limit;
res->flags = 1;
}
}
}
}
pci_domain_read_resources(dev);
#if CONFIG_PCI_64BIT_PREF_MEM
/* Initialize the system wide prefetchable memory resources constraints */
resource = new_resource(dev, 2);
resource->limit = 0xfcffffffffULL;
resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
#endif
}
static void my_tolm_test(void *gp, struct device *dev, struct resource *new)
{
struct resource **best_p = gp;
struct resource *best;
best = *best_p;
/* Skip VGA. */
if (!best || (best->base > new->base && new->base > 0xa0000)) {
best = new;
}
*best_p = best;
}
static u32 my_find_pci_tolm(struct bus *bus)
{
struct resource *min;
u32 tolm;
min = 0;
search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, my_tolm_test, &min);
tolm = 0xffffffffUL;
if (min && tolm > min->base) {
tolm = min->base;
}
return tolm;
}
#if CONFIG_HW_MEM_HOLE_SIZEK != 0
struct hw_mem_hole_info {
unsigned hole_startk;
int node_id;
};
static struct hw_mem_hole_info get_hw_mem_hole_info(void)
{
struct hw_mem_hole_info mem_hole;
int i;
mem_hole.hole_startk = CONFIG_HW_MEM_HOLE_SIZEK;
mem_hole.node_id = -1;
for (i = 0; i < fx_devs; i++) {
u32 base;
u32 hole;
base = f1_read_config32(0x40 + (i << 3));
if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
continue;
}
hole = pci_read_config32(__f1_dev[i], 0xf0);
if(hole & 1) { // we find the hole
mem_hole.hole_startk = (hole & (0xff<<24)) >> 10;
mem_hole.node_id = i; // record the node No with hole
break; // only one hole
}
}
/* We need to double check if there is special set on base reg and limit reg
* are not continuous instead of hole, it will find out its hole_startk.
*/
if(mem_hole.node_id==-1) {
u32 limitk_pri = 0;
for(i=0; i<8; i++) {
u32 base, limit;
unsigned base_k, limit_k;
base = f1_read_config32(0x40 + (i << 3));
if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
continue;
}
base_k = (base & 0xffff0000) >> 2;
if(limitk_pri != base_k) { // we find the hole
mem_hole.hole_startk = limitk_pri;
mem_hole.node_id = i;
break; //only one hole
}
limit = f1_read_config32(0x44 + (i << 3));
limit_k = ((limit + 0x00010000) & 0xffff0000) >> 2;
limitk_pri = limit_k;
}
}
return mem_hole;
}
static void disable_hoist_memory(unsigned long hole_startk, int node_id)
{
int i;
device_t dev;
u32 base, limit;
u32 hoist;
u32 hole_sizek;
//1. find which node has hole
//2. change limit in that node.
//3. change base and limit in later node
//4. clear that node f0
//if there is not mem hole enabled, we need to change it's base instead
hole_sizek = (4*1024*1024) - hole_startk;
for(i=7;i>node_id;i--) {
base = f1_read_config32(0x40 + (i << 3));
if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
continue;
}
limit = f1_read_config32(0x44 + (i << 3));
f1_write_config32(0x44 + (i << 3),limit - (hole_sizek << 2));
f1_write_config32(0x40 + (i << 3),base - (hole_sizek << 2));
}
limit = f1_read_config32(0x44 + (node_id << 3));
f1_write_config32(0x44 + (node_id << 3),limit - (hole_sizek << 2));
dev = __f1_dev[node_id];
if (dev == NULL) {
printk(BIOS_ERR, "%s: node %x is NULL!\n", __func__, node_id);
return;
}
hoist = pci_read_config32(dev, 0xf0);
if(hoist & 1) {
pci_write_config32(dev, 0xf0, 0);
} else {
base = pci_read_config32(dev, 0x40 + (node_id << 3));
f1_write_config32(0x40 + (node_id << 3),base - (hole_sizek << 2));
}
}
static u32 hoist_memory(unsigned long hole_startk, int node_id)
{
int i;
u32 carry_over;
device_t dev;
u32 base, limit;
u32 basek;
u32 hoist;
carry_over = (4*1024*1024) - hole_startk;
for(i=7;i>node_id;i--) {
base = f1_read_config32(0x40 + (i << 3));
if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
continue;
}
limit = f1_read_config32(0x44 + (i << 3));
f1_write_config32(0x44 + (i << 3),limit + (carry_over << 2));
f1_write_config32(0x40 + (i << 3),base + (carry_over << 2));
}
limit = f1_read_config32(0x44 + (node_id << 3));
f1_write_config32(0x44 + (node_id << 3),limit + (carry_over << 2));
dev = __f1_dev[node_id];
base = pci_read_config32(dev, 0x40 + (node_id << 3));
basek = (base & 0xffff0000) >> 2;
if(basek == hole_startk) {
//don't need set memhole here, because hole off set will be 0, overflow
//so need to change base reg instead, new basek will be 4*1024*1024
base &= 0x0000ffff;
base |= (4*1024*1024)<<2;
f1_write_config32(0x40 + (node_id<<3), base);
}
else if (dev)
{
hoist = /* hole start address */
((hole_startk << 10) & 0xff000000) +
/* hole address to memory controller address */
(((basek + carry_over) >> 6) & 0x0000ff00) +
/* enable */
1;
pci_write_config32(dev, 0xf0, hoist);
}
return carry_over;
}
#endif
#include <cbmem.h>
static void setup_uma_memory(void)
{
#if CONFIG_GFXUMA
uint32_t topmem = (uint32_t) bsp_topmem();
#if !CONFIG_BOARD_ASROCK_939A785GMH && !CONFIG_BOARD_AMD_MAHOGANY
switch (topmem) {
case 0x10000000: /* 256M system memory */
uma_memory_size = 0x2000000; /* 32M recommended UMA */
break;
case 0x18000000: /* 384M system memory */
uma_memory_size = 0x4000000; /* 64M recommended UMA */
break;
case 0x20000000: /* 512M system memory */
uma_memory_size = 0x4000000; /* 64M recommended UMA */
break;
default: /* 1GB and above system memory */
uma_memory_size = 0x8000000; /* 128M recommended UMA */
break;
}
#else
/* refer to UMA Size Consideration in 780 BDG. */
switch (topmem) {
case 0x10000000: /* 256M system memory */
uma_memory_size = 0x4000000; /* 64M recommended UMA */
break;
case 0x20000000: /* 512M system memory */
uma_memory_size = 0x8000000; /* 128M recommended UMA */
break;
default: /* 1GB and above system memory */
uma_memory_size = 0x10000000; /* 256M recommended UMA */
break;
}
#endif
uma_memory_base = topmem - uma_memory_size; /* TOP_MEM1 */
printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
__func__, uma_memory_size, uma_memory_base);
#endif
}
static void amdk8_domain_set_resources(device_t dev)
{
#if CONFIG_PCI_64BIT_PREF_MEM
struct resource *io, *mem1, *mem2;
struct resource *res;
#endif
unsigned long mmio_basek;
u32 pci_tolm;
u64 ramtop = 0;
int i, idx;
#if CONFIG_HW_MEM_HOLE_SIZEK != 0
struct hw_mem_hole_info mem_hole;
u32 reset_memhole = 1;
#endif
#if 0
/* Place the IO devices somewhere safe */
io = find_resource(dev, 0);
io->base = DEVICE_IO_START;
#endif
#if CONFIG_PCI_64BIT_PREF_MEM
/* Now reallocate the pci resources memory with the
* highest addresses I can manage.
*/
mem1 = find_resource(dev, 1);
mem2 = find_resource(dev, 2);
#if 1
printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n",
mem1->base, mem1->limit, mem1->size, mem1->align);
printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n",
mem2->base, mem2->limit, mem2->size, mem2->align);
#endif
/* See if both resources have roughly the same limits */
if (((mem1->limit <= 0xffffffff) && (mem2->limit <= 0xffffffff)) ||
((mem1->limit > 0xffffffff) && (mem2->limit > 0xffffffff)))
{
/* If so place the one with the most stringent alignment first
*/
if (mem2->align > mem1->align) {
struct resource *tmp;
tmp = mem1;
mem1 = mem2;
mem2 = tmp;
}
/* Now place the memory as high up as it will go */
mem2->base = resource_max(mem2);
mem1->limit = mem2->base - 1;
mem1->base = resource_max(mem1);
}
else {
/* Place the resources as high up as they will go */
mem2->base = resource_max(mem2);
mem1->base = resource_max(mem1);
}
#if 1
printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n",
mem1->base, mem1->limit, mem1->size, mem1->align);
printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n",
mem2->base, mem2->limit, mem2->size, mem2->align);
#endif
for(res = dev->resource_list; res; res = res->next)
{
res->flags |= IORESOURCE_ASSIGNED;
res->flags |= IORESOURCE_STORED;
report_resource_stored(dev, res, "");
}
#endif
pci_tolm = my_find_pci_tolm(dev->link_list);
// FIXME handle interleaved nodes. If you fix this here, please fix
// amdfam10, too.
mmio_basek = pci_tolm >> 10;
/* Round mmio_basek to something the processor can support */
mmio_basek &= ~((1 << 6) -1);
// FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M
// MMIO hole. If you fix this here, please fix amdfam10, too.
/* Round the mmio hole to 64M */
mmio_basek &= ~((64*1024) - 1);
#if CONFIG_HW_MEM_HOLE_SIZEK != 0
/* if the hw mem hole is already set in raminit stage, here we will compare mmio_basek and hole_basek
* if mmio_basek is bigger that hole_basek and will use hole_basek as mmio_basek and we don't need to reset hole.
* otherwise We reset the hole to the mmio_basek
*/
#if !CONFIG_K8_REV_F_SUPPORT
if (!is_cpu_pre_e0()) {
#endif
mem_hole = get_hw_mem_hole_info();
if ((mem_hole.node_id != -1) && (mmio_basek > mem_hole.hole_startk)) { //We will use hole_basek as mmio_basek, and we don't need to reset hole anymore
mmio_basek = mem_hole.hole_startk;
reset_memhole = 0;
}
//mmio_basek = 3*1024*1024; // for debug to meet boundary
if(reset_memhole) {
if(mem_hole.node_id!=-1) { // We need to select CONFIG_HW_MEM_HOLE_SIZEK for raminit, it can not make hole_startk to some basek too....!
// We need to reset our Mem Hole, because We want more big HOLE than we already set
//Before that We need to disable mem hole at first, becase memhole could already be set on i+1 instead
disable_hoist_memory(mem_hole.hole_startk, mem_hole.node_id);
}
#if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
//We need to double check if the mmio_basek is valid for hole setting, if it is equal to basek, we need to decrease it some
u32 basek_pri;
for (i = 0; i < fx_devs; i++) {
u32 base;
u32 basek;
base = f1_read_config32(0x40 + (i << 3));
if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
continue;
}
basek = (base & 0xffff0000) >> 2;
if(mmio_basek == basek) {
mmio_basek -= (basek - basek_pri)>>1; // increase mem hole size to make sure it is on middle of pri node
break;
}
basek_pri = basek;
}
#endif
}
#if !CONFIG_K8_REV_F_SUPPORT
} // is_cpu_pre_e0
#endif
#endif
idx = 0x10;
for(i = 0; i < fx_devs; i++) {
u32 base, limit;
u32 basek, limitk, sizek;
base = f1_read_config32(0x40 + (i << 3));
limit = f1_read_config32(0x44 + (i << 3));
if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
continue;
}
basek = (base & 0xffff0000) >> 2;
limitk = ((limit + 0x00010000) & 0xffff0000) >> 2;
sizek = limitk - basek;
/* see if we need a hole from 0xa0000 to 0xbffff */
if ((basek < ((8*64)+(8*16))) && (sizek > ((8*64)+(16*16)))) {
ram_resource(dev, (idx | i), basek, ((8*64)+(8*16)) - basek);
idx += 0x10;
basek = (8*64)+(16*16);
sizek = limitk - ((8*64)+(16*16));
}
#if CONFIG_GFXUMA
printk(BIOS_DEBUG, "node %d : uma_memory_base/1024=0x%08llx, mmio_basek=0x%08lx, basek=0x%08x, limitk=0x%08x\n", i, uma_memory_base >> 10, mmio_basek, basek, limitk);
if ((uma_memory_base >> 10) < mmio_basek)
printk(BIOS_ALERT, "node %d: UMA memory starts below mmio_basek\n", i);
#else
// printk(BIOS_DEBUG, "node %d : mmio_basek=%08x, basek=%08x, limitk=%08x\n", i, mmio_basek, basek, limitk); //yhlu
#endif
/* See if I need to split the region to accommodate pci memory space */
if ( (basek < 4*1024*1024 ) && (limitk > mmio_basek) ) {
if (basek <= mmio_basek) {
unsigned pre_sizek;
pre_sizek = mmio_basek - basek;
if(pre_sizek>0) {
ram_resource(dev, (idx | i), basek, pre_sizek);
idx += 0x10;
sizek -= pre_sizek;
if (!ramtop)
ramtop = mmio_basek * 1024;
}
#if CONFIG_HW_MEM_HOLE_SIZEK != 0
if(reset_memhole)
#if !CONFIG_K8_REV_F_SUPPORT
if(!is_cpu_pre_e0() )
#endif
sizek += hoist_memory(mmio_basek,i);
#endif
basek = mmio_basek;
}
if ((basek + sizek) <= 4*1024*1024) {
sizek = 0;
}
else {
basek = 4*1024*1024;
sizek -= (4*1024*1024 - mmio_basek);
}
}
ram_resource(dev, (idx | i), basek, sizek);
idx += 0x10;
printk(BIOS_DEBUG, "%d: mmio_basek=%08lx, basek=%08x, limitk=%08x\n",
i, mmio_basek, basek, limitk);
if (!ramtop)
ramtop = limitk * 1024;
}
#if CONFIG_GFXUMA
set_top_of_ram(uma_memory_base);
uma_resource(dev, 7, uma_memory_base >> 10, uma_memory_size >> 10);
#else
set_top_of_ram(ramtop);
#endif
assign_resources(dev->link_list);
}
static void amdk8_domain_scan_bus(device_t dev)
{
u32 reg;
int i;
struct bus *link = dev->link_list;
/* Unmap all of the HT chains */
for(reg = 0xe0; reg <= 0xec; reg += 4) {
f1_write_config32(reg, 0);
}
link->secondary = dev->bus->subordinate;
pci_scan_bus(link, PCI_DEVFN(0x18, 0), 0xff);
dev->bus->subordinate = link->subordinate;
/* Tune the hypertransport transaction for best performance.
* Including enabling relaxed ordering if it is safe.
*/
get_fx_devs();
for(i = 0; i < fx_devs; i++) {
device_t f0_dev;
f0_dev = __f0_dev[i];
if (f0_dev && f0_dev->enabled) {
u32 httc;
httc = pci_read_config32(f0_dev, HT_TRANSACTION_CONTROL);
httc &= ~HTTC_RSP_PASS_PW;
if (!dev->link_list->disable_relaxed_ordering) {
httc |= HTTC_RSP_PASS_PW;
}
printk(BIOS_SPEW, "%s passpw: %s\n",
dev_path(dev),
(!dev->link_list->disable_relaxed_ordering)?
"enabled":"disabled");
pci_write_config32(f0_dev, HT_TRANSACTION_CONTROL, httc);
}
}
}
static struct device_operations pci_domain_ops = {
.read_resources = amdk8_domain_read_resources,
.set_resources = amdk8_domain_set_resources,
.enable_resources = NULL,
.init = NULL,
.scan_bus = amdk8_domain_scan_bus,
.ops_pci_bus = pci_bus_default_ops,
};
static void add_more_links(device_t dev, unsigned total_links)
{
struct bus *link, *last = NULL;
int link_num = -1;
for (link = dev->link_list; link; link = link->next) {
if (link_num < link->link_num)
link_num = link->link_num;
last = link;
}
if (last) {
int links = total_links - (link_num + 1);
if (links > 0) {
link = malloc(links*sizeof(*link));
if (!link)
die("Couldn't allocate more links!\n");
memset(link, 0, links*sizeof(*link));
last->next = link;
}
}
else {
link = malloc(total_links*sizeof(*link));
memset(link, 0, total_links*sizeof(*link));
dev->link_list = link;
}
for (link_num = link_num + 1; link_num < total_links; link_num++) {
link->link_num = link_num;
link->dev = dev;
link->next = link + 1;
last = link;
link = link->next;
}
last->next = NULL;
}
static void cpu_bus_scan(device_t dev)
{
struct bus *cpu_bus;
device_t dev_mc;
int bsp_apicid;
int i,j;
unsigned nb_cfg_54;
unsigned siblings;
int e0_later_single_core;
int disable_siblings;
nb_cfg_54 = 0;
sysconf.enabled_apic_ext_id = 0;
sysconf.lift_bsp_apicid = 0;
siblings = 0;
/* Find the bootstrap processors apicid */
bsp_apicid = lapicid();
sysconf.apicid_offset = bsp_apicid;
disable_siblings = !CONFIG_LOGICAL_CPUS;
#if CONFIG_LOGICAL_CPUS
get_option(&disable_siblings, "multi_core");
#endif
// for pre_e0, nb_cfg_54 can not be set, (when you read it still is 0)
// How can I get the nb_cfg_54 of every node's nb_cfg_54 in bsp???
// and differ d0 and e0 single core
nb_cfg_54 = read_nb_cfg_54();
dev_mc = dev_find_slot(0, PCI_DEVFN(0x18, 0));
if (!dev_mc) {
die("0:18.0 not found?");
}
sysconf.nodes = ((pci_read_config32(dev_mc, 0x60)>>4) & 7) + 1;
if (pci_read_config32(dev_mc, 0x68) & (HTTC_APIC_EXT_ID|HTTC_APIC_EXT_BRD_CST))
{
sysconf.enabled_apic_ext_id = 1;
if(bsp_apicid == 0) {
/* bsp apic id is not changed */
sysconf.apicid_offset = CONFIG_APIC_ID_OFFSET;
} else
{
sysconf.lift_bsp_apicid = 1;
}
}
/* Find which cpus are present */
cpu_bus = dev->link_list;
/* Always use the devicetree node with lapic_id 0 for BSP. */
remap_bsp_lapic(cpu_bus);
for(i = 0; i < sysconf.nodes; i++) {
device_t cpu_dev;
/* Find the cpu's pci device */
cpu_dev = dev_find_slot(0, PCI_DEVFN(0x18 + i, 3));
if (!cpu_dev) {
/* If I am probing things in a weird order
* ensure all of the cpu's pci devices are found.
*/
int local_j;
device_t dev_f0;
for(local_j = 0; local_j <= 3; local_j++) {
cpu_dev = pci_probe_dev(NULL, dev_mc->bus,
PCI_DEVFN(0x18 + i, local_j));
}
/* Ok, We need to set the links for that device.
* otherwise the device under it will not be scanned
*/
dev_f0 = dev_find_slot(0, PCI_DEVFN(0x18+i,0));
if(dev_f0) {
add_more_links(dev_f0, 3);
}
}
e0_later_single_core = 0;
int enable_node = cpu_dev && cpu_dev->enabled;
if (enable_node) {
j = pci_read_config32(cpu_dev, 0xe8);
j = (j >> 12) & 3; // dev is func 3
printk(BIOS_DEBUG, " %s siblings=%d\n", dev_path(cpu_dev), j);
if(nb_cfg_54) {
// For e0 single core if nb_cfg_54 is set, apicid will be 0, 2, 4....
// ----> you can mixed single core e0 and dual core e0 at any sequence
// That is the typical case
if(j == 0 ){
#if !CONFIG_K8_REV_F_SUPPORT
e0_later_single_core = is_e0_later_in_bsp(i); // single core
#else
e0_later_single_core = is_cpu_f0_in_bsp(i); // We can read cpuid(1) from Func3
#endif
} else {
e0_later_single_core = 0;
}
if(e0_later_single_core) {
printk(BIOS_DEBUG, "\tFound Rev E or Rev F later single core\n");
j=1;
}
if(siblings > j ) {
}
else {
siblings = j;
}
} else {
siblings = j;
}
}
u32 jj;
if(e0_later_single_core || disable_siblings) {
jj = 0;
} else
{
jj = siblings;
}
for (j = 0; j <=jj; j++ ) {
u32 apic_id = i * (nb_cfg_54?(siblings+1):1) + j * (nb_cfg_54?1:8);
if(sysconf.enabled_apic_ext_id) {
if (apic_id != 0 || sysconf.lift_bsp_apicid) {
apic_id += sysconf.apicid_offset;
}
}
device_t cpu = add_cpu_device(cpu_bus, apic_id, enable_node);
if (cpu)
amd_cpu_topology(cpu, i, j);
} //j
}
}
static void cpu_bus_init(device_t dev)
{
#if CONFIG_WAIT_BEFORE_CPUS_INIT
cpus_ready_for_init();
#endif
initialize_cpus(dev->link_list);
}
static struct device_operations cpu_bus_ops = {
.read_resources = DEVICE_NOOP,
.set_resources = DEVICE_NOOP,
.enable_resources = DEVICE_NOOP,
.init = cpu_bus_init,
.scan_bus = cpu_bus_scan,
};
static void root_complex_enable_dev(struct device *dev)
{
static int done = 0;
/* Do not delay UMA setup, as a device on the PCI bus may evaluate
the global uma_memory variables already in its enable function. */
if (!done) {
setup_bsp_ramtop();
setup_uma_memory();
done = 1;
}
/* Set the operations if it is a special bus type */
if (dev->path.type == DEVICE_PATH_DOMAIN) {
dev->ops = &pci_domain_ops;
}
else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) {
dev->ops = &cpu_bus_ops;
}
}
struct chip_operations northbridge_amd_amdk8_root_complex_ops = {
CHIP_NAME("AMD K8 Root Complex")
.enable_dev = root_complex_enable_dev,
};