#
# This file is part of the coreboot project.
#
# Copyright (C) 2011 Advanced Micro Devices, Inc.
# Copyright (C) 2014 Kyösti Mälkki <kyosti.malkki@gmail.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
chip northbridge/amd/agesa/family14/root_complex
	device cpu_cluster 0 on
			chip cpu/amd/agesa/family14
			  device lapic 0 on end
			end
	end
	device domain 0 on
		subsystemid 0x1022 0x1510 inherit
			chip northbridge/amd/agesa/family14 # CPU side of HT root complex
#				device pci 18.0 on #  northbridge
				chip northbridge/amd/agesa/family14 # PCI side of HT root complex
					device pci 0.0 on end # Root Complex
					device pci 1.0 off end # Internal Graphics P2P bridge 0x980[2456]
					device pci 4.0 on end # PCIE P2P bridge on-board NIC 3
					device pci 5.0 on end # PCIE P2P bridge on-board NIC 2
					device pci 6.0 on end # PCIE P2P bridge on-board NIC 1
					device pci 7.0 on end # PCIE P2P bridge miniPCIe slot 1
					device pci 8.0 on end # NB/SB Link P2P bridge
				end # agesa northbridge

				chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus
					device pci 11.0 on end # SATA
					device pci 12.0 on end # OHCI USB 0-4
					device pci 12.2 on end # EHCI USB 0-4
					device pci 13.0 on end # OHCI USB 5-9
					device pci 13.2 on end # EHCI USB 5-9
					device pci 14.0 on end # SMBus
					device pci 14.1 off end # IDE	0x439c
					device pci 14.2 off end # HDA	0x4383
					device pci 14.3 on # LPC		0x439d
					chip superio/nuvoton/nct5104d
						register "irq_trigger_type" = "0"
						device pnp 2e.0 off end
						device pnp 2e.2 on
							io 0x60 = 0x3f8
							irq 0x70 = 4
						end
						device pnp 2e.3 on
							io 0x60 = 0x2f8
							irq 0x70 = 3
						end
						device pnp 2e.10 off
							# UART C is conditionally turned on
							io 0x60 = 0x3e8
							irq 0x70 = 4
						end
						device pnp 2e.11 off
							# UART D is conditionally turned on
							io 0x60 = 0x2e8
							irq 0x70 = 3
						end
						device pnp 2e.8 off end
						device pnp 2e.f off end
						# GPIO0 and GPIO1 are conditionally turned on
						device pnp 2e.007 off end
						device pnp 2e.107 off end
						device pnp 2e.607 off end
						device pnp 2e.e off end
					end
					end #LPC
					device pci 14.4 on end # PCIB 0x4384 always active; pins remapped to gpio by disconnect_pcib = 1
					device pci 14.5 off end # OHCI FS/LS USB
					#device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699)
					device pci 15.0 on end # PCIe PortA miniPCIe slot 2
					device pci 15.1 off end # PCIe PortB
					device pci 15.2 off end # PCIe PortC
					device pci 15.3 off end # PCIe PortD
					device pci 16.0 on end # OHCI USB 10-13
					device pci 16.2 on end # EHCI USB 10-13
					register "gpp_configuration" = "4" # GPP_CFGMODE_X1111
					register "disconnect_pcib" = "1"
					register "boot_switch_sata_ide" = "0"	# 0: boot from SATA. 1: IDE
				end	#southbridge/amd/cimx/sb800
#			end #  device pci 18.0
# These seem unnecessary
			device pci 18.0 on end
			device pci 18.1 on end
			device pci 18.2 on end
			device pci 18.3 on end
			device pci 18.4 on end
			device pci 18.5 on end
			device pci 18.6 on end
			device pci 18.7 on end

		end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex
	end #domain
end #northbridge/amd/agesa/family14/root_complex