Add a new CMOS variable which triggers activation of the
LPT port. With the CMOS variable set, LPT is found by SeaBIOS,
with the variable reset, it's not.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6302 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/mainboard/kontron/986lcd-m/romstage.c b/src/mainboard/kontron/986lcd-m/romstage.c
index 5d773ce..925c93e 100644
--- a/src/mainboard/kontron/986lcd-m/romstage.c
+++ b/src/mainboard/kontron/986lcd-m/romstage.c
@@ -58,12 +58,16 @@
static void ich7_enable_lpc(void)
{
+ int lpt_en = 0;
+ if (read_option(CMOS_VSTART_lpt, CMOS_VLEN_lpt, 0) != 0) {
+ lpt_en = 1<<2; // enable LPT
+ }
// Enable Serial IRQ
pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0);
// Set COM1/COM2 decode range
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010);
// Enable COM1/COM2/KBD/SuperIO1+2
- pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x340b);
+ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x340b | lpt_en);
// Enable HWM at 0xa00
pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x00fc0a01);
// COM3 decode