diff --git a/src/soc/intel/denverton_ns/lpc.c b/src/soc/intel/denverton_ns/lpc.c
new file mode 100644
index 0000000..48e81e5
--- /dev/null
+++ b/src/soc/intel/denverton_ns/lpc.c
@@ -0,0 +1,336 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 - 2017 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include <arch/acpi.h>
+#include <cpu/cpu.h>
+#include <cpu/x86/smm.h>
+#include <bootstate.h>
+
+#include <soc/lpc.h>
+#include <soc/pci_devs.h>
+#include <soc/ramstage.h>
+#include <soc/iomap.h>
+#include <soc/pcr.h>
+#include <soc/p2sb.h>
+#include <soc/acpi.h>
+
+#include "chip.h"
+
+/* PCH-LP redirection entries */
+#define PCH_LP_REDIR_ETR 120
+
+/**
+ * Set miscellanous static southbridge features.
+ *
+ * @param dev PCI device with I/O APIC control registers
+ */
+static void pch_enable_ioapic(struct device *dev)
+{
+	u32 reg32;
+
+	set_ioapic_id((void *)IO_APIC_ADDR, IO_APIC0);
+
+	/* affirm full set of redirection table entries ("write once") */
+	reg32 = io_apic_read((void *)IO_APIC_ADDR, 0x01);
+
+	reg32 &= ~0x00ff0000;
+	reg32 |= (PCH_LP_REDIR_ETR - 1) << 16;
+
+	io_apic_write((void *)IO_APIC_ADDR, 0x01, reg32);
+
+	/*
+	 * Select Boot Configuration register (0x03) and
+	 * use Processor System Bus (0x01) to deliver interrupts.
+	 */
+	io_apic_write((void *)IO_APIC_ADDR, 0x03, 0x01);
+}
+
+/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
+ * 0x00 - 0000 = Reserved
+ * 0x01 - 0001 = Reserved
+ * 0x02 - 0010 = Reserved
+ * 0x03 - 0011 = IRQ3
+ * 0x04 - 0100 = IRQ4
+ * 0x05 - 0101 = IRQ5
+ * 0x06 - 0110 = IRQ6
+ * 0x07 - 0111 = IRQ7
+ * 0x08 - 1000 = Reserved
+ * 0x09 - 1001 = IRQ9
+ * 0x0A - 1010 = IRQ10
+ * 0x0B - 1011 = IRQ11
+ * 0x0C - 1100 = IRQ12
+ * 0x0D - 1101 = Reserved
+ * 0x0E - 1110 = IRQ14
+ * 0x0F - 1111 = IRQ15
+ * PIRQ[n]_ROUT[7] - PIRQ Routing Control
+ * 0x80 - The PIRQ is not routed.
+ */
+
+static void pch_pirq_init(device_t dev)
+{
+	device_t irq_dev;
+	/* Get the chip configuration */
+	config_t *config = dev->chip_info;
+
+	/* Initialize PIRQ Routings */
+	write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQA_ROUT),
+	       config->pirqa_routing);
+	write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQB_ROUT),
+	       config->pirqb_routing);
+	write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQC_ROUT),
+	       config->pirqc_routing);
+	write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQD_ROUT),
+	       config->pirqd_routing);
+
+	write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQE_ROUT),
+	       config->pirqe_routing);
+	write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQF_ROUT),
+	       config->pirqf_routing);
+	write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQG_ROUT),
+	       config->pirqg_routing);
+	write8((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIRQH_ROUT),
+	       config->pirqh_routing);
+
+	/* Initialize device's Interrupt Routings */
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR00),
+		config->ir00_routing);
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR01),
+		config->ir01_routing);
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR02),
+		config->ir02_routing);
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR03),
+		config->ir03_routing);
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR04),
+		config->ir04_routing);
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR05),
+		config->ir05_routing);
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR06),
+		config->ir06_routing);
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR07),
+		config->ir07_routing);
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR08),
+		config->ir08_routing);
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR09),
+		config->ir09_routing);
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR10),
+		config->ir10_routing);
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR11),
+		config->ir11_routing);
+	write16((void *)PCH_PCR_ADDRESS(PID_ITSS, PCR_ITSS_PIR12),
+		config->ir12_routing);
+
+	/* Initialize device's Interrupt Polarity Control */
+	write32((void *)PCH_PCR_ADDRESS(PID_ITSS, PCH_PCR_ITSS_IPC0),
+		config->ipc0);
+	write32((void *)PCH_PCR_ADDRESS(PID_ITSS, PCH_PCR_ITSS_IPC1),
+		config->ipc1);
+	write32((void *)PCH_PCR_ADDRESS(PID_ITSS, PCH_PCR_ITSS_IPC2),
+		config->ipc2);
+	write32((void *)PCH_PCR_ADDRESS(PID_ITSS, PCH_PCR_ITSS_IPC3),
+		config->ipc3);
+
+	for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
+		u8 int_pin = 0, int_line = 0;
+
+		if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI)
+			continue;
+
+		int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
+
+		switch (int_pin) {
+		case 1: /* INTA# */
+			int_line = config->pirqa_routing;
+			break;
+		case 2: /* INTB# */
+			int_line = config->pirqb_routing;
+			break;
+		case 3: /* INTC# */
+			int_line = config->pirqc_routing;
+			break;
+		case 4: /* INTD# */
+			int_line = config->pirqd_routing;
+			break;
+		}
+
+		if (!int_line)
+			continue;
+
+		pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
+	}
+}
+
+static void pci_p2sb_read_resources(device_t dev)
+{
+	struct resource *res;
+
+	/* Add MMIO resource
+	 * Use 0xda as an unused index for PCR BAR.
+	 */
+	res = new_resource(dev, 0xda);
+	res->base = DEFAULT_PCR_BASE;
+	res->size = 16 * 1024 * 1024; /* 16MB PCR config space */
+	res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED |
+		     IORESOURCE_ASSIGNED;
+	printk(BIOS_DEBUG,
+	       "Adding P2SB PCR config space BAR 0x%08lx-0x%08lx.\n",
+	       (unsigned long)(res->base),
+	       (unsigned long)(res->base + res->size));
+
+	/* Add MMIO resource
+	 * Use 0xdb as an unused index for IOAPIC.
+	 */
+	res = new_resource(dev, 0xdb); /* IOAPIC */
+	res->base = IO_APIC_ADDR;
+	res->size = 0x00001000;
+	res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+}
+
+static void pch_enable_serial_irqs(struct device *dev)
+{
+	/* Set packet length and toggle silent mode bit for one frame. */
+	pci_write_config8(dev, SERIRQ_CNTL,
+			  (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0));
+#if !IS_ENABLED(CONFIG_SERIRQ_CONTINUOUS_MODE)
+	pci_write_config8(dev, SERIRQ_CNTL,
+			  (1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0));
+#endif
+}
+
+static void lpc_init(struct device *dev)
+{
+	printk(BIOS_DEBUG, "pch: lpc_init\n");
+
+	/* Get the base address */
+
+	/* Set the value for PCI command register. */
+	pci_write_config16(dev, PCI_COMMAND,
+			   PCI_COMMAND_SPECIAL | PCI_COMMAND_MASTER |
+				   PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
+
+	/* Serial IRQ initialization. */
+	pch_enable_serial_irqs(dev);
+
+	/* IO APIC initialization. */
+	pch_enable_ioapic(dev);
+
+	/* Setup the PIRQ. */
+	pch_pirq_init(dev);
+}
+
+static void pch_lpc_add_mmio_resources(device_t dev) { /* TODO */ }
+
+static void pch_lpc_add_io_resources(device_t dev)
+{
+	struct resource *res;
+	u8 io_index = 0;
+
+	/* Add an extra subtractive resource for both memory and I/O. */
+	res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
+	res->base = 0;
+	res->size = 0x1000;
+	res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
+		     IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+	res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
+	res->base = 0xff000000;
+	res->size = 0x01000000; /* 16 MB for flash */
+	res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
+		     IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+}
+
+static void lpc_read_resources(device_t dev)
+{
+	/* Get the normal PCI resources of this device. */
+	pci_dev_read_resources(dev);
+
+	/* Add non-standard MMIO resources. */
+	pch_lpc_add_mmio_resources(dev);
+
+	/* Add IO resources. */
+	pch_lpc_add_io_resources(dev);
+
+	/* Add MMIO resource for IOAPIC. */
+	pci_p2sb_read_resources(dev);
+}
+
+static void pch_decode_init(struct device *dev) { /* TODO */ }
+
+static void lpc_enable_resources(device_t dev)
+{
+	pch_decode_init(dev);
+	pci_dev_enable_resources(dev);
+}
+
+/* Set bit in Function Disable register to hide this device */
+static void pch_hide_devfn(uint32_t devfn) { /* TODO */ }
+
+void southcluster_enable_dev(device_t dev)
+{
+	u32 reg32;
+
+	if (!dev->enabled) {
+		printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev));
+
+		/* Ensure memory, io, and bus master are all disabled */
+		reg32 = pci_read_config32(dev, PCI_COMMAND);
+		reg32 &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY |
+			   PCI_COMMAND_IO);
+		pci_write_config32(dev, PCI_COMMAND, reg32);
+
+		/* Hide this device if possible */
+		pch_hide_devfn(dev->path.pci.devfn);
+	} else {
+		/* Enable SERR */
+		reg32 = pci_read_config32(dev, PCI_COMMAND);
+		reg32 |= PCI_COMMAND_SERR;
+		pci_write_config32(dev, PCI_COMMAND, reg32);
+	}
+}
+
+static struct device_operations device_ops = {
+	.read_resources = lpc_read_resources,
+	.set_resources = pci_dev_set_resources,
+#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES)
+	.acpi_inject_dsdt_generator = southcluster_inject_dsdt,
+	.write_acpi_tables = southcluster_write_acpi_tables,
+#endif
+	.enable_resources = lpc_enable_resources,
+	.init = lpc_init,
+	.enable = southcluster_enable_dev,
+	.scan_bus = scan_lpc_bus,
+	.ops_pci = &soc_pci_ops,
+};
+
+static const struct pci_driver lpc_driver __pci_driver = {
+	.ops = &device_ops,
+	.vendor = PCI_VENDOR_ID_INTEL,
+	.device = LPC_DEVID,
+};
+
+static void finalize_chipset(void *unused)
+{
+	printk(BIOS_DEBUG, "Finalizing SMM.\n");
+	outb(APM_CNT_FINALIZE, APM_CNT);
+}
+
+BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, finalize_chipset, NULL);
+BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, finalize_chipset, NULL);