Documentation is like sex: when it is good, it is very, very good; and when it is bad, it is better than nothing.
That said please always try to write documentation! One problem in the firmware development is the missing documentation. In this document you will get a brief introduction how to write, submit and publish documenation to coreboot.
The easiest way to build the documentation is using a docker image. To build the image run the following in the base directory:
make -C util/docker/ doc.coreboot.org
Before building the documentation make sure the output directory is given the correct permissions before running docker.
mkdir -p Documentation/_build
To build the documentation:
make -C util/docker docker-build-docs
To have the documentation build and served over a web server live run:
make -C util/docker docker-livehtml-docs
On the host machine, open a browser to the address http://0.0.0.0:8000.
Please follow this official guide to install sphinx. You will also need python-recommonmark for sphinx to be able to handle markdown documentation.
Since some Linux distributions don't package every needed sphinx extension, the installation via pip in a venv is recommended. You'll need these python3 modules:
The following combination of versions has been tested: sphinx 2.3.1, recommonmark 0.6.0, sphinx_rtd_theme 0.4.3 and sphinxcontrib-ditaa 0.7.
Now change into the
Documentation folder in the coreboot directory and run this command in there
If no error occurs, you can find the generated HTML documentation in
Install sphinx-autobuild for rebuilding markdown/rst sources on the fly!
The following rules should be followed in order to get it at least reviewed on review.coreboot.org.
Starting with Sphinx 1.6 recommonmark's auto_doc_ref feature is broken. To reference documents use the TOC tree or inline RST code.
Under Sphinx markdown tables are not supported. Therefore you can use following code block to write tables in reStructuredText and embed them into the markdown:
```eval_rst +------------+------------+-----------+ | Header 1 | Header 2 | Header 3 | +============+============+===========+ | body row 1 | column 2 | column 3 | +------------+------------+-----------+ | body row 2 | Cells may span columns.| +------------+------------+-----------+ | body row 3 | Cells may | - Cells | +------------+ span rows. | - contain | | body row 4 | | - blocks. | +------------+------------+-----------+ ``` #just a code block is enough
To make sure that all documents are included into the final documentation, you must reference each document from at least one toctree. The toctree must only reference files in the same folder or in subfolders ! To create a toctree, simply use a bullet list or numbered list with a single reference. References in regular text aren't considered as toctree . This feature is enabled by recommonmark's enable_auto_toc_tree .
* [Chapter 1](chapter1.md) * [Chapter 2](chapter2.md) * [Subchapter](sub/index.md)
1. [Chapter 1](chapter1.md) 2. [Chapter 2](chapter2.md)
If you do only reference the document, but do not include it in any toctree, you'll see the following warning: WARNING: document isn't included in any toctree
You can import CSV files and let sphinx automatically convert them to human readable tables, using the following reStructuredText snipped:
```eval_rst .. csv-table:: :header: "Key", "Value" :file: keyvalues.csv ```
Of course this can only be done from a markdown file that is included in the TOC tree.