diff --git a/src/cpu/intel/haswell/haswell.h b/src/cpu/intel/haswell/haswell.h
index 8d91dba..3ced0c0 100644
--- a/src/cpu/intel/haswell/haswell.h
+++ b/src/cpu/intel/haswell/haswell.h
@@ -103,7 +103,16 @@
 #ifndef __ROMCC__
 
 #if defined(__PRE_RAM__)
-void romstage_main(unsigned long bist);
+struct pei_data;
+struct rcba_config_instruction;
+struct romstage_params {
+	struct pei_data *pei_data;
+	const void *gpio_map;
+	const struct rcba_config_instruction *rcba_config;
+	unsigned long bist;
+};
+void mainboard_romstage_entry(unsigned long bist);
+void romstage_common(const struct romstage_params *params);
 #endif
 
 #ifdef __SMM__
diff --git a/src/cpu/intel/haswell/romstage.c b/src/cpu/intel/haswell/romstage.c
index f954b91..1d00af1 100644
--- a/src/cpu/intel/haswell/romstage.c
+++ b/src/cpu/intel/haswell/romstage.c
@@ -20,9 +20,32 @@
 #include <stdint.h>
 #include <cbmem.h>
 #include <console/console.h>
+#include <arch/cpu.h>
+#include <cpu/x86/bist.h>
+#include <cpu/x86/msr.h>
+#include <lib.h>
+#include <timestamp.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_def.h>
+#include <cpu/x86/lapic.h>
+#include <cbmem.h>
+#if CONFIG_CHROMEOS
+#include <vendorcode/google/chromeos/chromeos.h>
+#endif
+#include "haswell.h"
+#include "northbridge/intel/haswell/haswell.h"
+#include "northbridge/intel/haswell/raminit.h"
+#include "southbridge/intel/lynxpoint/pch.h"
+#include "southbridge/intel/lynxpoint/me.h"
 
-/* Mainboard needs to supply this symbol. */
-extern void romstage_main(unsigned long bist);
+
+/* The cache-as-ram assembly file calls main() after setting up cache-as-ram.
+ * main() will then call the mainboards's mainboard_romstage_entry() function.
+ * That function then calls romstage_common() below. The reason for the back
+ * and forth is to provide common entry point from cache-as-ram while still
+ * allowing for code sharing. Because we can't use global variables the stack
+ * is used for allocations -- thus the need to call back and forth. */
 
 void main(unsigned long bist)
 {
@@ -37,7 +60,7 @@
 	for (i = 0; i < num_guards; i++)
 		stack_base[i] = stack_guard;
 
-	romstage_main(bist);
+	mainboard_romstage_entry(bist);
 
 	/* Check the stack. */
 	for (i = 0; i < num_guards; i++) {
@@ -51,3 +74,116 @@
 	cbmemc_reinit();
 #endif
 }
+
+void romstage_common(const struct romstage_params *params)
+{
+	int boot_mode = 0;
+	int wake_from_s3;
+	int cbmem_was_initted;
+
+#if CONFIG_COLLECT_TIMESTAMPS
+	tsc_t start_romstage_time;
+	tsc_t before_dram_time;
+	tsc_t after_dram_time;
+	tsc_t base_time = {
+		.lo = pci_read_config32(PCI_DEV(0, 0x00, 0), 0xdc),
+		.hi = pci_read_config32(PCI_DEV(0, 0x1f, 2), 0xd0)
+	};
+#endif
+
+#if CONFIG_COLLECT_TIMESTAMPS
+	start_romstage_time = rdtsc();
+#endif
+
+	if (params->bist == 0)
+		enable_lapic();
+
+	wake_from_s3 = early_pch_init(params->gpio_map, params->rcba_config);
+
+	/* Halt if there was a built in self test failure */
+	report_bist_failure(params->bist);
+
+	/* Perform some early chipset initialization required
+	 * before RAM initialization can work
+	 */
+	haswell_early_initialization(HASWELL_MOBILE);
+	printk(BIOS_DEBUG, "Back from haswell_early_initialization()\n");
+
+	if (wake_from_s3) {
+#if CONFIG_HAVE_ACPI_RESUME
+		printk(BIOS_DEBUG, "Resume from S3 detected.\n");
+		boot_mode = 2;
+#else
+		printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n");
+#endif
+	}
+
+	/* Prepare USB controller early in S3 resume */
+	if (boot_mode == 2)
+		enable_usb_bar();
+
+	post_code(0x3a);
+	params->pei_data->boot_mode = boot_mode;
+#if CONFIG_COLLECT_TIMESTAMPS
+	before_dram_time = rdtsc();
+#endif
+
+	report_platform_info();
+
+	sdram_initialize(params->pei_data);
+
+#if CONFIG_COLLECT_TIMESTAMPS
+	after_dram_time = rdtsc();
+#endif
+	post_code(0x3b);
+
+	intel_early_me_status();
+
+	quick_ram_check();
+	post_code(0x3e);
+
+#if CONFIG_EARLY_CBMEM_INIT
+	cbmem_was_initted = !cbmem_initialize();
+#else
+	cbmem_was_initted = cbmem_reinit((uint64_t) (get_top_of_ram()
+						     - HIGH_MEMORY_SIZE));
+#endif
+
+#if CONFIG_HAVE_ACPI_RESUME
+	/* If there is no high memory area, we didn't boot before, so
+	 * this is not a resume. In that case we just create the cbmem toc.
+	 */
+
+	*(u32 *)CBMEM_BOOT_MODE = 0;
+	*(u32 *)CBMEM_RESUME_BACKUP = 0;
+
+	if ((boot_mode == 2) && cbmem_was_initted) {
+		void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME);
+		if (resume_backup_memory) {
+			*(u32 *)CBMEM_BOOT_MODE = boot_mode;
+			*(u32 *)CBMEM_RESUME_BACKUP = (u32)resume_backup_memory;
+		}
+		/* Magic for S3 resume */
+		pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d);
+	} else if (boot_mode == 2) {
+		/* Failed S3 resume, reset to come up cleanly */
+		outb(0x6, 0xcf9);
+		while (1) {
+			hlt();
+		}
+	} else {
+		pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe);
+	}
+#endif
+	post_code(0x3f);
+#if CONFIG_CHROMEOS
+	init_chromeos(boot_mode);
+#endif
+#if CONFIG_COLLECT_TIMESTAMPS
+	timestamp_init(base_time);
+	timestamp_add(TS_START_ROMSTAGE, start_romstage_time );
+	timestamp_add(TS_BEFORE_INITRAM, before_dram_time );
+	timestamp_add(TS_AFTER_INITRAM, after_dram_time );
+	timestamp_add_now(TS_END_ROMSTAGE);
+#endif
+}