blob: f17a44ff178bf1a78f2eb0768af828f9da77bb90 [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2013 Sage Electronic Engineering, LLC.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <pc80/mc146818rtc.h>
#include <pc80/isa-dma.h>
#include <pc80/i8259.h>
#include <arch/io.h>
#include <arch/ioapic.h>
#include <arch/acpi.h>
#include <cpu/cpu.h>
#include <elog.h>
#include <arch/acpigen.h>
#include <drivers/intel/gma/i915.h>
#include <cpu/x86/smm.h>
#include <cbmem.h>
#include <string.h>
#include "pch.h"
#include "nvs.h"
#define NMI_OFF 0
#define ENABLE_ACPI_MODE_IN_COREBOOT 0
typedef struct southbridge_intel_fsp_bd82x6x_config config_t;
static void pch_enable_apic(struct device *dev)
{
int i;
u32 reg32;
volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR);
volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10);
/* Enable ACPI I/O and power management.
* Set SCI IRQ to IRQ9
*/
pci_write_config8(dev, ACPI_CNTL, 0x80);
*ioapic_index = 0;
*ioapic_data = (1 << 25);
/* affirm full set of redirection table entries ("write once") */
*ioapic_index = 1;
reg32 = *ioapic_data;
*ioapic_index = 1;
*ioapic_data = reg32;
*ioapic_index = 0;
reg32 = *ioapic_data;
printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f);
if (reg32 != (1 << 25))
die("APIC Error\n");
printk(BIOS_SPEW, "Dumping IOAPIC registers\n");
for (i=0; i<3; i++) {
*ioapic_index = i;
printk(BIOS_SPEW, " reg 0x%04x:", i);
reg32 = *ioapic_data;
printk(BIOS_SPEW, " 0x%08x\n", reg32);
}
*ioapic_index = 3; /* Select Boot Configuration register. */
*ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */
}
static void pch_enable_serial_irqs(struct device *dev)
{
/* Set packet length and toggle silent mode bit for one frame. */
pci_write_config8(dev, SERIRQ_CNTL,
(1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0));
#if !IS_ENABLED(CONFIG_SERIRQ_CONTINUOUS_MODE)
pci_write_config8(dev, SERIRQ_CNTL,
(1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0));
#endif
}
/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
* 0x00 - 0000 = Reserved
* 0x01 - 0001 = Reserved
* 0x02 - 0010 = Reserved
* 0x03 - 0011 = IRQ3
* 0x04 - 0100 = IRQ4
* 0x05 - 0101 = IRQ5
* 0x06 - 0110 = IRQ6
* 0x07 - 0111 = IRQ7
* 0x08 - 1000 = Reserved
* 0x09 - 1001 = IRQ9
* 0x0A - 1010 = IRQ10
* 0x0B - 1011 = IRQ11
* 0x0C - 1100 = IRQ12
* 0x0D - 1101 = Reserved
* 0x0E - 1110 = IRQ14
* 0x0F - 1111 = IRQ15
* PIRQ[n]_ROUT[7] - PIRQ Routing Control
* 0x80 - The PIRQ is not routed.
*/
static void pch_pirq_init(device_t dev)
{
device_t irq_dev;
/* Get the chip configuration */
config_t *config = dev->chip_info;
pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing);
pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing);
pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing);
pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing);
pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing);
pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing);
pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing);
pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing);
/* Eric Biederman once said we should let the OS do this.
* I am not so sure anymore he was right.
*/
for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
u8 int_pin=0, int_line=0;
if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI)
continue;
int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
switch (int_pin) {
case 1: /* INTA# */ int_line = config->pirqa_routing; break;
case 2: /* INTB# */ int_line = config->pirqb_routing; break;
case 3: /* INTC# */ int_line = config->pirqc_routing; break;
case 4: /* INTD# */ int_line = config->pirqd_routing; break;
}
if (!int_line)
continue;
pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
}
}
static void pch_gpi_routing(device_t dev)
{
/* Get the chip configuration */
config_t *config = dev->chip_info;
u32 reg32 = 0;
/* An array would be much nicer here, or some
* other method of doing this.
*/
reg32 |= (config->gpi0_routing & 0x03) << 0;
reg32 |= (config->gpi1_routing & 0x03) << 2;
reg32 |= (config->gpi2_routing & 0x03) << 4;
reg32 |= (config->gpi3_routing & 0x03) << 6;
reg32 |= (config->gpi4_routing & 0x03) << 8;
reg32 |= (config->gpi5_routing & 0x03) << 10;
reg32 |= (config->gpi6_routing & 0x03) << 12;
reg32 |= (config->gpi7_routing & 0x03) << 14;
reg32 |= (config->gpi8_routing & 0x03) << 16;
reg32 |= (config->gpi9_routing & 0x03) << 18;
reg32 |= (config->gpi10_routing & 0x03) << 20;
reg32 |= (config->gpi11_routing & 0x03) << 22;
reg32 |= (config->gpi12_routing & 0x03) << 24;
reg32 |= (config->gpi13_routing & 0x03) << 26;
reg32 |= (config->gpi14_routing & 0x03) << 28;
reg32 |= (config->gpi15_routing & 0x03) << 30;
pci_write_config32(dev, GPIO_ROUT, reg32);
}
static void pch_power_options(device_t dev)
{
u8 reg8;
u16 reg16, pmbase;
u32 reg32;
const char *state;
/* Get the chip configuration */
config_t *config = dev->chip_info;
int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
int nmi_option;
/* Which state do we want to goto after g3 (power restored)?
* 0 == S0 Full On
* 1 == S5 Soft Off
*
* If the option is not existent (Laptops), use Kconfig setting.
*/
get_option(&pwr_on, "power_on_after_fail");
reg16 = pci_read_config16(dev, GEN_PMCON_3);
reg16 &= 0xfffe;
switch (pwr_on) {
case MAINBOARD_POWER_OFF:
reg16 |= 1;
state = "off";
break;
case MAINBOARD_POWER_ON:
reg16 &= ~1;
state = "on";
break;
case MAINBOARD_POWER_KEEP:
reg16 &= ~1;
state = "state keep";
break;
default:
state = "undefined";
}
reg16 &= ~(3 << 4); /* SLP_S4# Assertion Stretch 4s */
reg16 |= (1 << 3); /* SLP_S4# Assertion Stretch Enable */
reg16 &= ~(1 << 10);
reg16 |= (1 << 11); /* SLP_S3# Min Assertion Width 50ms */
reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */
pci_write_config16(dev, GEN_PMCON_3, reg16);
printk(BIOS_INFO, "Set power %s after power failure.\n", state);
/* Set up NMI on errors. */
reg8 = inb(0x61);
reg8 &= 0x0f; /* Higher Nibble must be 0 */
reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */
// reg8 &= ~(1 << 2); /* PCI SERR# Enable */
reg8 |= (1 << 2); /* PCI SERR# Disable for now */
outb(reg8, 0x61);
reg8 = inb(0x70);
nmi_option = NMI_OFF;
get_option(&nmi_option, "nmi");
if (nmi_option) {
printk(BIOS_INFO, "NMI sources enabled.\n");
reg8 &= ~(1 << 7); /* Set NMI. */
} else {
printk(BIOS_INFO, "NMI sources disabled.\n");
reg8 |= (1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */
}
outb(reg8, 0x70);
/* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
reg16 = pci_read_config16(dev, GEN_PMCON_1);
reg16 &= ~(3 << 0); // SMI# rate 1 minute
reg16 &= ~(1 << 10); // Disable BIOS_PCI_EXP_EN for native PME
#if DEBUG_PERIODIC_SMIS
/* Set DEBUG_PERIODIC_SMIS in pch.h to debug using
* periodic SMIs.
*/
reg16 |= (3 << 0); // Periodic SMI every 8s
#endif
pci_write_config16(dev, GEN_PMCON_1, reg16);
// Set the board's GPI routing.
pch_gpi_routing(dev);
pmbase = pci_read_config16(dev, 0x40) & 0xfffe;
outl(config->gpe0_en, pmbase + GPE0_EN);
outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN);
/* Set up power management block and determine sleep mode */
reg32 = inl(pmbase + 0x04); // PM1_CNT
reg32 &= ~(7 << 10); // SLP_TYP
reg32 |= (1 << 0); // SCI_EN
outl(reg32, pmbase + 0x04);
/* Clear magic status bits to prevent unexpected wake */
reg32 = RCBA32(0x3310);
reg32 |= (1 << 4)|(1 << 5)|(1 << 0);
RCBA32(0x3310) = reg32;
}
static void pch_rtc_init(struct device *dev)
{
u8 reg8;
int rtc_failed;
reg8 = pci_read_config8(dev, GEN_PMCON_3);
rtc_failed = reg8 & RTC_BATTERY_DEAD;
if (rtc_failed) {
reg8 &= ~RTC_BATTERY_DEAD;
pci_write_config8(dev, GEN_PMCON_3, reg8);
#if IS_ENABLED(CONFIG_ELOG)
elog_add_event(ELOG_TYPE_RTC_RESET);
#endif
}
printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed);
cmos_init(rtc_failed);
}
/* CougarPoint PCH Power Management init */
static void cpt_pm_init(struct device *dev)
{
printk(BIOS_DEBUG, "CougarPoint PM init\n");
pci_write_config8(dev, 0xa9, 0x47);
RCBA32_AND_OR(0x2238, ~0UL, (1 << 6)|(1 << 0));
RCBA32_AND_OR(0x228c, ~0UL, (1 << 0));
RCBA16_AND_OR(0x1100, ~0UL, (1 << 13)|(1 << 14));
RCBA16_AND_OR(0x0900, ~0UL, (1 << 14));
RCBA32(0x2304) = 0xc0388400;
RCBA32_AND_OR(0x2314, ~0UL, (1 << 5)|(1 << 18));
RCBA32_AND_OR(0x2320, ~0UL, (1 << 15)|(1 << 1));
RCBA32_AND_OR(0x3314, ~0x1f, 0xf);
RCBA32(0x3318) = 0x050f0000;
RCBA32(0x3324) = 0x04000000;
RCBA32_AND_OR(0x3340, ~0UL, 0xfffff);
RCBA32_AND_OR(0x3344, ~0UL, (1 << 1));
RCBA32(0x3360) = 0x0001c000;
RCBA32(0x3368) = 0x00061100;
RCBA32(0x3378) = 0x7f8fdfff;
RCBA32(0x337c) = 0x000003fc;
RCBA32(0x3388) = 0x00001000;
RCBA32(0x3390) = 0x0001c000;
RCBA32(0x33a0) = 0x00000800;
RCBA32(0x33b0) = 0x00001000;
RCBA32(0x33c0) = 0x00093900;
RCBA32(0x33cc) = 0x24653002;
RCBA32(0x33d0) = 0x062108fe;
RCBA32_AND_OR(0x33d4, 0xf000f000, 0x00670060);
RCBA32(0x3a28) = 0x01010000;
RCBA32(0x3a2c) = 0x01010404;
RCBA32(0x3a80) = 0x01041041;
RCBA32_AND_OR(0x3a84, ~0x0000ffff, 0x00001001);
RCBA32_AND_OR(0x3a84, ~0UL, (1 << 24)); /* SATA 2/3 disabled */
RCBA32_AND_OR(0x3a88, ~0UL, (1 << 0)); /* SATA 4/5 disabled */
RCBA32(0x3a6c) = 0x00000001;
RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c);
RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20);
RCBA32(0x33c8) = 0;
RCBA32_AND_OR(0x21b0, ~0UL, 0xf);
}
/* PantherPoint PCH Power Management init */
static void ppt_pm_init(struct device *dev)
{
printk(BIOS_DEBUG, "PantherPoint PM init\n");
pci_write_config8(dev, 0xa9, 0x47);
RCBA32_AND_OR(0x2238, ~0UL, (1 << 0));
RCBA32_AND_OR(0x228c, ~0UL, (1 << 0));
RCBA16_AND_OR(0x1100, ~0UL, (1 << 13)|(1 << 14));
RCBA16_AND_OR(0x0900, ~0UL, (1 << 14));
RCBA32(0x2304) = 0xc03b8400;
RCBA32_AND_OR(0x2314, ~0UL, (1 << 5)|(1 << 18));
RCBA32_AND_OR(0x2320, ~0UL, (1 << 15)|(1 << 1));
RCBA32_AND_OR(0x3314, ~0x1f, 0xf);
RCBA32(0x3318) = 0x054f0000;
RCBA32(0x3324) = 0x04000000;
RCBA32_AND_OR(0x3340, ~0UL, 0xfffff);
RCBA32_AND_OR(0x3344, ~0UL, (1 << 1)|(1 << 0));
RCBA32(0x3360) = 0x0001c000;
RCBA32(0x3368) = 0x00061100;
RCBA32(0x3378) = 0x7f8fdfff;
RCBA32(0x337c) = 0x000003fd;
RCBA32(0x3388) = 0x00001000;
RCBA32(0x3390) = 0x0001c000;
RCBA32(0x33a0) = 0x00000800;
RCBA32(0x33b0) = 0x00001000;
RCBA32(0x33c0) = 0x00093900;
RCBA32(0x33cc) = 0x24653002;
RCBA32(0x33d0) = 0x067388fe;
RCBA32_AND_OR(0x33d4, 0xf000f000, 0x00670060);
RCBA32(0x3a28) = 0x01010000;
RCBA32(0x3a2c) = 0x01010404;
RCBA32(0x3a80) = 0x01040000;
RCBA32_AND_OR(0x3a84, ~0x0000ffff, 0x00001001);
RCBA32_AND_OR(0x3a84, ~0UL, (1 << 24)); /* SATA 2/3 disabled */
RCBA32_AND_OR(0x3a88, ~0UL, (1 << 0)); /* SATA 4/5 disabled */
RCBA32(0x3a6c) = 0x00000001;
RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c);
RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20);
RCBA32_AND_OR(0x33a4, ~0UL, (1 << 0));
RCBA32(0x33c8) = 0;
RCBA32_AND_OR(0x21b0, ~0UL, 0xf);
}
static void enable_hpet(void)
{
u32 reg32;
/* Move HPET to default address 0xfed00000 and enable it */
reg32 = RCBA32(HPTC);
reg32 |= (1 << 7); // HPET Address Enable
reg32 &= ~(3 << 0);
RCBA32(HPTC) = reg32;
}
static void pch_set_acpi_mode(void)
{
if (!acpi_is_wakeup_s3() && CONFIG_HAVE_SMI_HANDLER) {
#if ENABLE_ACPI_MODE_IN_COREBOOT
printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n");
outb(APM_CNT_ACPI_ENABLE, APM_CNT); // Enable ACPI mode
printk(BIOS_DEBUG, "done.\n");
#else
printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n");
outb(APM_CNT_ACPI_DISABLE, APM_CNT); // Disable ACPI mode
printk(BIOS_DEBUG, "done.\n");
#endif
}
}
static void pch_disable_smm_only_flashing(struct device *dev)
{
u8 reg8;
printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... ");
reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
reg8 &= ~(1 << 5);
pci_write_config8(dev, 0xdc, reg8);
}
static void pch_fixups(struct device *dev)
{
u8 gen_pmcon_2;
/* Indicate DRAM init done for MRC S3 to know it can resume */
gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2);
gen_pmcon_2 |= (1 << 7);
pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2);
}
static void pch_decode_init(struct device *dev)
{
config_t *config = dev->chip_info;
printk(BIOS_DEBUG, "pch_decode_init\n");
pci_write_config32(dev, LPC_GEN1_DEC, config->gen1_dec);
pci_write_config32(dev, LPC_GEN2_DEC, config->gen2_dec);
pci_write_config32(dev, LPC_GEN3_DEC, config->gen3_dec);
pci_write_config32(dev, LPC_GEN4_DEC, config->gen4_dec);
}
static void lpc_init(struct device *dev)
{
printk(BIOS_DEBUG, "pch: lpc_init\n");
/* Set the value for PCI command register. */
pci_write_config16(dev, PCI_COMMAND, 0x000f);
/* IO APIC initialization. */
pch_enable_apic(dev);
pch_enable_serial_irqs(dev);
/* Setup the PIRQ. */
pch_pirq_init(dev);
/* Setup power options. */
pch_power_options(dev);
/* Initialize power management */
switch (pch_silicon_type()) {
case PCH_TYPE_CPT: /* CougarPoint */
cpt_pm_init(dev);
break;
case PCH_TYPE_PPT: /* PantherPoint */
ppt_pm_init(dev);
break;
default:
printk(BIOS_ERR, "Unknown Chipset: 0x%04x\n", dev->device);
}
/* Set the state of the GPIO lines. */
//gpio_init(dev);
/* Initialize the real time clock. */
pch_rtc_init(dev);
/* Initialize ISA DMA. */
isa_dma_init();
/* Initialize the High Precision Event Timers, if present. */
enable_hpet();
setup_i8259();
/* The OS should do this? */
/* Interrupt 9 should be level triggered (SCI) */
i8259_configure_irq_trigger(9, 1);
pch_disable_smm_only_flashing(dev);
pch_set_acpi_mode();
pch_fixups(dev);
}
static void pch_lpc_read_resources(device_t dev)
{
struct resource *res;
config_t *config = dev->chip_info;
u8 io_index = 0;
/* Get the normal PCI resources of this device. */
pci_dev_read_resources(dev);
/* Add an extra subtractive resource for both memory and I/O. */
res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
res->base = 0;
res->size = 0x1000;
res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
res->base = 0xff800000;
res->size = 0x00800000; /* 8 MB for flash */
res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
res = new_resource(dev, 3); /* IOAPIC */
res->base = IO_APIC_ADDR;
res->size = 0x00001000;
res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
/* Set PCH IO decode ranges if required.*/
if ((config->gen1_dec & 0xFFFC) > 0x1000) {
res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
res->base = config->gen1_dec & 0xFFFC;
res->size = (config->gen1_dec >> 16) & 0xFC;
res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
}
if ((config->gen2_dec & 0xFFFC) > 0x1000) {
res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
res->base = config->gen2_dec & 0xFFFC;
res->size = (config->gen2_dec >> 16) & 0xFC;
res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
}
if ((config->gen3_dec & 0xFFFC) > 0x1000) {
res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
res->base = config->gen3_dec & 0xFFFC;
res->size = (config->gen3_dec >> 16) & 0xFC;
res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
}
if ((config->gen4_dec & 0xFFFC) > 0x1000) {
res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
res->base = config->gen4_dec & 0xFFFC;
res->size = (config->gen4_dec >> 16) & 0xFC;
res->flags = IORESOURCE_IO| IORESOURCE_SUBTRACTIVE |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
}
}
static void pch_lpc_enable_resources(device_t dev)
{
pch_decode_init(dev);
return pci_dev_enable_resources(dev);
}
static void pch_lpc_enable(device_t dev)
{
pch_enable(dev);
}
static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
if (!vendor || !device) {
pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
pci_read_config32(dev, PCI_VENDOR_ID));
} else {
pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
((device & 0xffff) << 16) | (vendor & 0xffff));
}
}
static void southbridge_inject_dsdt(device_t dev)
{
global_nvs_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, sizeof(*gnvs));
if (gnvs) {
const struct i915_gpu_controller_info *gfx = intel_gma_get_controller_info();
memset(gnvs, 0, sizeof(*gnvs));
acpi_create_gnvs(gnvs);
gnvs->ndid = gfx->ndid;
memcpy(gnvs->did, gfx->did, sizeof(gnvs->did));
/* And tell SMI about it */
smm_setup_structures(gnvs, NULL, NULL);
/* Add it to DSDT. */
acpigen_write_scope("\\");
acpigen_write_name_dword("NVSA", (u32) gnvs);
acpigen_pop_len();
}
}
void acpi_fill_fadt(acpi_fadt_t *fadt)
{
device_t dev = dev_find_slot(0, PCI_DEVFN(0x1f,0));
config_t *chip = dev->chip_info;
u16 pmbase = pci_read_config16(dev, 0x40) & 0xfffe;
int c2_latency;
fadt->model = 1;
fadt->sci_int = 0x9;
fadt->smi_cmd = APM_CNT;
fadt->acpi_enable = APM_CNT_ACPI_ENABLE;
fadt->acpi_disable = APM_CNT_ACPI_DISABLE;
fadt->s4bios_req = 0x0;
fadt->pstate_cnt = 0;
fadt->pm1a_evt_blk = pmbase;
fadt->pm1b_evt_blk = 0x0;
fadt->pm1a_cnt_blk = pmbase + 0x4;
fadt->pm1b_cnt_blk = 0x0;
fadt->pm2_cnt_blk = pmbase + 0x50;
fadt->pm_tmr_blk = pmbase + 0x8;
fadt->gpe0_blk = pmbase + 0x20;
fadt->gpe1_blk = 0;
fadt->pm1_evt_len = 4;
fadt->pm1_cnt_len = 2;
fadt->pm2_cnt_len = 1;
fadt->pm_tmr_len = 4;
fadt->gpe0_blk_len = 16;
fadt->gpe1_blk_len = 0;
fadt->gpe1_base = 0;
fadt->cst_cnt = 0;
c2_latency = chip->c2_latency;
if (!c2_latency) {
c2_latency = 101; /* c2 unsupported */
}
fadt->p_lvl2_lat = c2_latency;
fadt->p_lvl3_lat = 87;
fadt->flush_size = 1024;
fadt->flush_stride = 16;
fadt->duty_offset = 1;
if (chip->p_cnt_throttling_supported) {
fadt->duty_width = 3;
} else {
fadt->duty_width = 0;
}
fadt->day_alrm = 0xd;
fadt->mon_alrm = 0x00;
fadt->century = 0x00;
fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042;
fadt->flags = ACPI_FADT_WBINVD |
ACPI_FADT_C1_SUPPORTED |
ACPI_FADT_SLEEP_BUTTON |
ACPI_FADT_RESET_REGISTER |
ACPI_FADT_SEALED_CASE |
ACPI_FADT_S4_RTC_WAKE |
ACPI_FADT_PLATFORM_CLOCK;
if (c2_latency < 100) {
fadt->flags |= ACPI_FADT_C2_MP_SUPPORTED;
}
fadt->reset_reg.space_id = 1;
fadt->reset_reg.bit_width = 8;
fadt->reset_reg.bit_offset = 0;
fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
fadt->reset_reg.addrl = 0xcf9;
fadt->reset_reg.addrh = 0;
fadt->reset_value = 6;
fadt->x_pm1a_evt_blk.space_id = 1;
fadt->x_pm1a_evt_blk.bit_width = 32;
fadt->x_pm1a_evt_blk.bit_offset = 0;
fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
fadt->x_pm1a_evt_blk.addrl = pmbase;
fadt->x_pm1a_evt_blk.addrh = 0x0;
fadt->x_pm1b_evt_blk.space_id = 1;
fadt->x_pm1b_evt_blk.bit_width = 0;
fadt->x_pm1b_evt_blk.bit_offset = 0;
fadt->x_pm1b_evt_blk.access_size = 0;
fadt->x_pm1b_evt_blk.addrl = 0x0;
fadt->x_pm1b_evt_blk.addrh = 0x0;
fadt->x_pm1a_cnt_blk.space_id = 1;
fadt->x_pm1a_cnt_blk.bit_width = 16;
fadt->x_pm1a_cnt_blk.bit_offset = 0;
fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS;
fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4;
fadt->x_pm1a_cnt_blk.addrh = 0x0;
fadt->x_pm1b_cnt_blk.space_id = 1;
fadt->x_pm1b_cnt_blk.bit_width = 0;
fadt->x_pm1b_cnt_blk.bit_offset = 0;
fadt->x_pm1b_cnt_blk.access_size = 0;
fadt->x_pm1b_cnt_blk.addrl = 0x0;
fadt->x_pm1b_cnt_blk.addrh = 0x0;
fadt->x_pm2_cnt_blk.space_id = 1;
fadt->x_pm2_cnt_blk.bit_width = 8;
fadt->x_pm2_cnt_blk.bit_offset = 0;
fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50;
fadt->x_pm2_cnt_blk.addrh = 0x0;
fadt->x_pm_tmr_blk.space_id = 1;
fadt->x_pm_tmr_blk.bit_width = 32;
fadt->x_pm_tmr_blk.bit_offset = 0;
fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
fadt->x_pm_tmr_blk.addrh = 0x0;
fadt->x_gpe0_blk.space_id = 1;
fadt->x_gpe0_blk.bit_width = 128;
fadt->x_gpe0_blk.bit_offset = 0;
fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
fadt->x_gpe0_blk.addrl = pmbase + 0x20;
fadt->x_gpe0_blk.addrh = 0x0;
fadt->x_gpe1_blk.space_id = 1;
fadt->x_gpe1_blk.bit_width = 0;
fadt->x_gpe1_blk.bit_offset = 0;
fadt->x_gpe1_blk.access_size = 0;
fadt->x_gpe1_blk.addrl = 0x0;
fadt->x_gpe1_blk.addrh = 0x0;
}
static void lpc_final(struct device *dev)
{
/* Call SMM finalize() handlers before resume */
if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)) {
if (IS_ENABLED(CONFIG_INTEL_CHIPSET_LOCKDOWN) ||
acpi_is_wakeup_s3()) {
outb(APM_CNT_FINALIZE, APM_CNT);
}
}
}
static struct pci_operations pci_ops = {
.set_subsystem = set_subsystem,
};
static struct device_operations device_ops = {
.read_resources = pch_lpc_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pch_lpc_enable_resources,
.write_acpi_tables = acpi_write_hpet,
.acpi_inject_dsdt_generator = southbridge_inject_dsdt,
.init = lpc_init,
.final = lpc_final,
.enable = pch_lpc_enable,
.scan_bus = scan_lpc_bus,
.ops_pci = &pci_ops,
};
/* IDs for LPC device of Intel 6 Series Chipset, Intel 7 Series Chipset, and
* Intel C200 Series Chipset
*/
static const unsigned short pci_device_ids[] = { 0x1c46, 0x1c47, 0x1c49, 0x1c4a,
0x1c4b, 0x1c4c, 0x1c4d, 0x1c4e,
0x1c4f, 0x1c50, 0x1c52, 0x1c54,
0x1e55, 0x1c56, 0x1e57, 0x1c5c,
0x1e5d, 0x1e5e, 0x1e5f, 0x2310,
0 };
static const struct pci_driver pch_lpc __pci_driver = {
.ops = &device_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.devices = pci_device_ids,
};