blob: 456a4354ca8ca3c9f26b1e8a8348a60f2fc8cdb9 [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007-2008 coresystems GmbH
* Copyright (C) 2014 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _SOC_INTEL_BROADWELL_CHIP_H_
#define _SOC_INTEL_BROADWELL_CHIP_H_
#include <stdint.h>
struct soc_intel_broadwell_config {
/*
* Interrupt Routing configuration
* If bit7 is 1, the interrupt is disabled.
*/
uint8_t pirqa_routing;
uint8_t pirqb_routing;
uint8_t pirqc_routing;
uint8_t pirqd_routing;
uint8_t pirqe_routing;
uint8_t pirqf_routing;
uint8_t pirqg_routing;
uint8_t pirqh_routing;
/* GPE configuration */
uint32_t gpe0_en_1;
uint32_t gpe0_en_2;
uint32_t gpe0_en_3;
uint32_t gpe0_en_4;
/* GPIO SMI configuration */
uint32_t alt_gp_smi_en;
/* IDE configuration */
uint8_t sata_port_map;
uint32_t sata_port0_gen3_tx;
uint32_t sata_port1_gen3_tx;
uint32_t sata_port2_gen3_tx;
uint32_t sata_port3_gen3_tx;
uint32_t sata_port0_gen3_dtle;
uint32_t sata_port1_gen3_dtle;
uint32_t sata_port2_gen3_dtle;
uint32_t sata_port3_gen3_dtle;
/*
* SATA DEVSLP Mux
* 0 = port 0 DEVSLP on DEVSLP0/GPIO33
* 1 = port 3 DEVSLP on DEVSLP0/GPIO33
*/
uint8_t sata_devslp_mux;
/*
* DEVSLP Disable
* 0: DEVSLP is enabled
* 1: DEVSLP is disabled
*/
uint8_t sata_devslp_disable;
/* Generic IO decode ranges */
uint32_t gen1_dec;
uint32_t gen2_dec;
uint32_t gen3_dec;
uint32_t gen4_dec;
/* Enable linear PCIe Root Port function numbers starting at zero */
uint8_t pcie_port_coalesce;
/* Force root port ASPM configuration with port bitmap */
uint8_t pcie_port_force_aspm;
/* Put SerialIO devices into ACPI mode instead of a PCI device */
uint8_t sio_acpi_mode;
/* I2C voltage select: 0=3.3V 1=1.8V */
uint8_t sio_i2c0_voltage;
uint8_t sio_i2c1_voltage;
/* Enable ADSP power gating features */
uint8_t adsp_d3_pg_enable;
uint8_t adsp_sram_pg_enable;
/*
* Clock Disable Map:
* [21:16] = CLKOUT_PCIE# 5-0
* [24] = CLKOUT_ITPXDP
*/
uint32_t icc_clock_disable;
/*
* Digital Port Hotplug Enable:
* 0x04 = Enabled, 2ms short pulse
* 0x05 = Enabled, 4.5ms short pulse
* 0x06 = Enabled, 6ms short pulse
* 0x07 = Enabled, 100ms short pulse
*/
u8 gpu_dp_b_hotplug;
u8 gpu_dp_c_hotplug;
u8 gpu_dp_d_hotplug;
/* Panel power sequence timings */
u8 gpu_panel_port_select;
u8 gpu_panel_power_cycle_delay;
u16 gpu_panel_power_up_delay;
u16 gpu_panel_power_down_delay;
u16 gpu_panel_power_backlight_on_delay;
u16 gpu_panel_power_backlight_off_delay;
/* Panel backlight settings */
u32 gpu_cpu_backlight;
u32 gpu_pch_backlight;
/*
* Graphics CD Clock Frequency
* 0 = 337.5MHz
* 1 = 450MHz
* 2 = 540MHz
* 3 = 675MHz
*/
int cdclk;
/* Enable S0iX support */
int s0ix_enable;
/*
* Minimum voltage for C6/C7 state:
* 0x67 = 1.6V (full swing)
* ...
* 0x79 = 1.7V
* ...
* 0x83 = 1.8V (no swing)
*/
int vr_cpu_min_vid;
/*
* Set slow VR ramp rate on C-state exit:
* 0 = Fast VR ramp rate / 2
* 1 = Fast VR ramp rate / 4
* 2 = Fast VR ramp rate / 8
* 3 = Fast VR ramp rate / 16
*/
int vr_slow_ramp_rate_set;
/* Enable slow VR ramp rate */
int vr_slow_ramp_rate_enable;
/* Deep SX enable */
int deep_sx_enable_ac;
int deep_sx_enable_dc;
/* TCC activation offset */
int tcc_offset;
};
typedef struct soc_intel_broadwell_config config_t;
#endif