/* $NoKeywords:$ */
/**
 * @file
 *
 * AMD IDS Routines
 *
 * Contains AMD AGESA Integrated Debug Macros
 *
 * @xrefitem bom "File Content Label" "Release Content"
 * @e project:      AGESA
 * @e sub-project:  IDS
 * @e \$Revision: 63425 $   @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $
 */
/*****************************************************************************
 *
 * Copyright (c) 2008 - 2012, Advanced Micro Devices, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
 *       its contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 ***************************************************************************/

  /* Macros to aid debugging */
  /* These definitions expand to zero (0) bytes of code when disabled */

#ifndef _IDS_H_
#define _IDS_H_

#undef FALSE
#undef TRUE
#define FALSE 0
#define TRUE  1
// Proto type for optionsids.h
typedef UINT32 IDS_STATUS;  ///< Status of IDS function.
#define IDS_SUCCESS         ((IDS_STATUS) 0x00000000ul) ///< IDS Function is Successful.
#define IDS_UNSUPPORTED     ((IDS_STATUS) 0xFFFFFFFFul) ///< IDS Function is not existed.

#define IDS_STRINGIZE(a) #a ///< for define stringize macro
#ifndef IDS_DEADLOOP
  #define IDS_DEADLOOP()    { volatile UINTN __i; __i = 1; while (__i); }
#endif
/**
 *  IDS Option Hook Points
 *
 *  These are the values to indicate hook point in AGESA for IDS Options.
 *
 */
typedef enum {                        //vv- for debug reference only
  IDS_INIT_EARLY_BEFORE,              ///< 00 Option Hook Point before AGESA function AMD_INIT_EARLY.
                                          ///<   IDS Object is initialized.
                                          ///<   Override CPU Core Leveling Mode.
                                          ///<   Set P-State in Post
  IDS_INIT_EARLY_AFTER,               ///< 01 Option Hook Point after AGESA function AMD_INIT_EARLY.
  IDS_INIT_LATE_BEFORE,               ///< 02 Option Hook Point before AGESA function AMD_INIT_LATE.
                                          ///< It will be used to control the following tables.
                                          ///<   ACPI P-State Table (_PSS, XPSS, _PCT, _PSD, _PPC)
                                          ///<   ACPI SRAT Table
                                          ///<   ACPI SLIT Table
                                          ///<   ACPI WHEA Table
                                          ///<   DMI Table
  IDS_INIT_LATE_AFTER,                ///< 03 Option Hook Point after AGESA function AMD_INIT_LATE.
  IDS_INIT_MID_BEFORE,                ///< 04 Option Hook Point before AGESA function AMD_INIT_MID.
  IDS_INIT_MID_AFTER,                 ///< 05 Option Hook Point after AGESA function AMD_INIT_MID.
  IDS_INIT_POST_BEFORE,               ///< 06 Option Hook Point before AGESA function AMD_INIT_POST.
                                          ///<   Control Interleaving and DRAM memory hole
                                          ///<   Override the setting of ECC Control
                                          ///<   Override the setting of Online Spare Rank
  IDS_INIT_POST_AFTER,                ///< 07 Option Hook Point after AGESA function AMD_INIT_POST.
  IDS_INIT_RESET_BEFORE,              ///< 08 Option Hook Point before AGESA function AMD_INIT_RESET.
  IDS_INIT_RESET_AFTER,               ///< 09 Option Hook Point after AGESA function AMD_INIT_RESET.
  IDS_INIT_POST_MID,                  ///< 0a Option Hook Point after AGESA function AMD_INIT_POST.
  IDS_BEFORE_S3_SAVE,                 ///< 0b override any settings before S3 save.
  IDS_BEFORE_S3_RESTORE,              ///< 0c  override any settings before S3 restore
  IDS_AFTER_S3_SAVE,                  ///< 0d Override any settings after S3 save
  IDS_AFTER_S3_RESTORE,               ///< 0e Override any settings after S3 restore
  IDS_BEFORE_DQS_TRAINING,            ///< 0f override any settings before DQS training
  IDS_BEFORE_DRAM_INIT,               ///< 10 override any settings before Dram initialization
  IDS_BEFORE_MEM_FREQ_CHG,            ///< 11 override settings before MemClk frequency change
  IDS_BEFORE_WARM_RESET ,             ///< 12 Override PCI or MSR Registers Before Warm Reset
  IDS_BEFORE_PCI_INIT,                ///< 13 Override PCI or MSR Registers Before PCI Init
  IDS_BEFORE_AP_EARLY_HALT,           ///< 14 Option Hook Point before AP early halt
  IDS_BEFORE_S3_RESUME,               ///< 15 Option Hook Point before s3 resume
  IDS_AFTER_S3_RESUME,                ///< 16 Option Hook Point after s3 resume
  IDS_BEFORE_PM_INIT,                 ///< 17 Option Hook Point Before Pm Init

  IDS_MT_BASE = 0x20,                 ///< 0x20 ~ 0x38 24 time points reserved for MTTime

  IDS_PLATFORM_RSVD1 = 0x38,          ///< from 0x38 to 0x3f will reserved for platform used
  IDS_PLATFORM_RSVD2 = 0x39,          ///< from 0x38 to 0x3f will reserved for platform used
  IDS_PLATFORM_RSVD3 = 0x3a,          ///< from 0x38 to 0x3f will reserved for platform used
  IDS_PLATFORM_RSVD4 = 0x3b,          ///< from 0x38 to 0x3f will reserved for platform used
  IDS_PLATFORM_RSVD5 = 0x3c,          ///< from 0x38 to 0x3f will reserved for platform used
  IDS_PLATFORM_RSVD6 = 0x3d,          ///< from 0x38 to 0x3f will reserved for platform used
  IDS_PLATFORM_RSVD7 = 0x3e,          ///< from 0x38 to 0x3f will reserved for platform used
  IDS_PLATFORM_RSVD8 = 0x3f,          ///< from 0x38 to 0x3f will reserved for platform used

  // All the above timing point is used by BVM, their value should never be changed
  IDS_HT_CONTROL,                     ///< 40 Override the setting of HT Link Control
  IDS_HT_TRISTATE,                    ///< 41 Enable or Disable HT Tri-state during an LDTSTP#
  IDS_INIT_DRAM_TABLE,                ///< 42 Generate override table for Dram Timing
                                          ///< Dram Controller, Drive Strength and DQS Timing
  IDS_GET_DRAM_TABLE,                 ///< 43 Generate override table for Dram Timing
  IDS_GANGING_MODE,                   ///< 44 override Memory Mode Unganged
  IDS_POWERDOWN_MODE,                 ///< 45 override Power Down Mode
  IDS_BURST_LENGTH32,                 ///< 46 override Burst Length32
  IDS_ALL_MEMORY_CLOCK,               ///< 47 override All Memory Clks Enable
  IDS_ECC,                            ///< 48 override ECC parameter
  IDS_ECCSYMBOLSIZE,                  ///< 49 override ECC symbol size
  IDS_CPU_Early_Override,             ///< 4a override CPU early parameter
  IDS_CACHE_FLUSH_HLT,                ///< 4b override Cache Flush Hlt
  IDS_CHANNEL_INTERLEAVE,             ///< 4c override Channel Interleave
  IDS_MEM_ERROR_RECOVERY,             ///< 4d override memory error recovery
  IDS_MEM_RETRAIN_TIMES,              ///< 4e override memory retrain times
  IDS_MEM_SIZE_OVERLAY,               ///< 4f Override the syslimit
  IDS_HT_ASSIST,                      ///< 50 Override Probe Filter
  IDS_CHECK_NEGATIVE_WL,              ///< 51 Check for negative write leveling result
  IDS_DLL_SHUT_DOWN,                  ///< 52 Check for Dll Shut Down
  IDS_POR_MEM_FREQ,                   ///< 53 Entry to enable/disable MemClk frequency enforcement
  IDS_PHY_DLL_STANDBY_CTRL,           ///< 54 Enable/Disable Phy DLL standby feature
  IDS_PLATFORMCFG_OVERRIDE,           ///< 55 Hook for Override PlatformConfig structure
  IDS_LOADCARD_ERROR_RECOVERY,        ///< 56 Special error handling for load card support
  IDS_MEM_IGNORE_ERROR,               ///< 57 Ignore error and do not do fatal exit in memory
  IDS_GNB_SMU_SERVICE_CONFIG,         ///< 58 Config GNB SMU service
  IDS_GNB_ORBDYNAMIC_WAKE,            ///< 59 config GNB dynamic wake
  IDS_GNB_PLATFORMCFG_OVERRIDE,       ///< 5a override ids gnb platform config
  IDS_GNB_LCLK_DPM_EN,                ///< 5b override GNB LCLK DPM configuration
  IDS_GNB_LCLK_DEEP_SLEEP,            ///< 5c override GNB LCLK DPM deep sleep
  IDS_GNB_CLOCK_GATING,               ///< 5d Override GNB Clock gating config
  IDS_NB_PSTATE_DIDVID,               ///< 5e Override NB P-state settings
  IDS_CPB_CTRL,                       ///< 5f Config the Core peformance boost feature
  IDS_HTC_CTRL,                       ///< 60 Hook for Hardware Thermal Control
  IDS_CC6_WORKAROUND,                 ///< 61 Hook for skip CC6 work around
  IDS_MEM_MR0,                        ///< 62 Hook for override Memory Mr0 register
  IDS_TRAP_TABLE,                     ///< 63 Hook for add IDS register table to the loop
  IDS_NBBUFFERALLOCATIONATEARLY,      ///< 64 Hook for override North bridge bufer allocation
  IDS_BEFORE_S3_SPECIAL,              ///< 65 Hook to bypass S3 special functions
  IDS_SET_PCI_REGISTER_ENTRY,         ///< 66 Hook to SetRegisterForPciEntry
  IDS_ERRATUM463_WORKAROUND,          ///< 67 Hook to Erratum 463 workaround
  IDS_BEFORE_MEMCLR,                  ///< 68 Hook before set Memclr bit
  IDS_OVERRIDE_IO_CSTATE,             ///< 69 Hook for override io C-state setting
  IDS_NBPSDIS_OVERRIDE,               ///< 6a Hook for override NB pstate disable setting
  IDS_NBPS_REG_OVERRIDE,              ///< 6b Hook for override Memory NBps reg
  IDS_LOW_POWER_PSTATE,               ///< 6c Hook for disalbe Low power_Pstates feature
  IDS_CST_CREATE,                     ///< 6d Hook for create _CST
  IDS_CST_SIZE,                       ///< 6e Hook for get _CST size
  IDS_ENFORCE_VDDIO,                  ///< 6f Hook to override VDDIO
  IDS_STRETCH_FREQUENCY_LIMIT,        ///< 70 Hook for enforcing memory stretch frequency limit
  IDS_INIT_MEM_REG_TABLE,             ///< 71 Hook for init memory register table
  IDS_SKIP_FUSED_MAX_RATE,            ///< 72 Hook to skip fused max rate cap
  IDS_FCH_INIT_AT_RESET,              ///< 73 Hook for FCH reset parameter
  IDS_FCH_INIT_AT_ENV,                ///< 74 Hook for FCH ENV parameter
  IDS_ENFORCE_PLAT_TABLES,            ///< 75 Hook to enforce platform specific tables
  IDS_NBPS_MIN_FREQ,                  ///< 76 Hook for override MIN nb ps freq
  IDS_GNB_FORCE_CABLESAFE,            ///< 77 Hook for override Force Cable Safe
  IDS_SKIP_PM_TRANSITION_STEP,        ///< 78 Hook for provide IDS ability to skip this PM step
  IDS_GNB_PROPERTY,                   ///< 79 Hook for GNB Property
  IDS_GNB_PCIE_POWER_GATING,          ///< 7A Hook for GNB PCIe Power Gating
  IDS_MEM_DYN_DRAM_TERM,              ///< 7B Hook for Override Dynamic Dram Term
  IDS_MEM_DRAM_TERM,                  ///< 7C Hook for Override Dram Term
  IDS_HT_TRACE_MODE,                     ///< 7D Trace Mode
  IDS_GNB_ALTVDDNB,                   ///< 7E Hook for Override AltVddNB
  IDS_UCODE,                          ///< 7F Enable or Disable microcode patching
  IDS_FAM_REG_GMMX,                   ///< 80 GMMX register access
  IDS_MEMORY_POWER_POLICY,            ///< 81 Memory power policy
  IDS_GET_STRETCH_FREQUENCY_LIMIT,    ///< 82 Hook for enforcing memory stretch frequency limit
  IDS_CPU_FEAT,                       ///< 83 Hook for runtime force cpu feature disable
  IDS_AFTER_DCT_PHY_ACCESS,           ///< 84 Hook for DctAccessDone check
  IDS_FORCE_PHY_TO_M0,                ///< 85 Hook to bypass M0 enforcement
  IDS_GNB_PMM_SWTJOFFSET,             ///< 86 Hook to GNBSWTJOFFSET
  IDS_LOCK_DRAM_CFG,                  ///< 87 Hook to BFLockDramCfg
  IDS_OPTION_END,                     ///< 88 End of IDS option
} AGESA_IDS_OPTION;

#include "OptionsIds.h"
#include "Filecode.h"

/* Initialize IDS controls */
#ifndef IDSOPT_IDS_ENABLED
  #define IDSOPT_IDS_ENABLED        FALSE
#endif

#ifndef IDSOPT_CONTROL_ENABLED
  #define IDSOPT_CONTROL_ENABLED    FALSE
#endif

#ifndef IDSOPT_CONTROL_NV_TO_CMOS
  #define IDSOPT_CONTROL_NV_TO_CMOS FALSE
#endif

#ifndef IDSOPT_TRACING_ENABLED
  #define IDSOPT_TRACING_ENABLED    FALSE
#endif

#ifndef IDSOPT_TRACE_USER_OPTIONS
  #define IDSOPT_TRACE_USER_OPTIONS TRUE
#endif

#ifndef IDSOPT_PERF_ANALYSIS
  #define IDSOPT_PERF_ANALYSIS      FALSE
#endif

#ifndef IDSOPT_HEAP_CHECKING
  #define IDSOPT_HEAP_CHECKING           FALSE
#endif

#ifndef IDSOPT_ERROR_TRAP_ENABLED
  #define IDSOPT_ERROR_TRAP_ENABLED   FALSE
#endif

#ifndef IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
  #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED   FALSE
#endif

#ifndef IDSOPT_DEBUG_CODE_ENABLED
  #define IDSOPT_DEBUG_CODE_ENABLED   FALSE
#endif

#ifndef IDSOPT_IDT_EXCEPTION_TRAP
  #define IDSOPT_IDT_EXCEPTION_TRAP FALSE
#endif

#ifndef IDSOPT_C_OPTIMIZATION_DISABLED
  #define IDSOPT_C_OPTIMIZATION_DISABLED   FALSE
#endif

#ifndef IDSOPT_TRACING_CONSOLE_HDTOUT
  #define IDSOPT_TRACING_CONSOLE_HDTOUT   FALSE
#endif

#ifndef IDSOPT_TRACING_CONSOLE_SERIALPORT
  #define IDSOPT_TRACING_CONSOLE_SERIALPORT   FALSE
#endif

#ifndef IDSOPT_TRACING_CONSOLE_REDIRECT_IO
  #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO  FALSE
#endif

#if IDSOPT_IDS_ENABLED == FALSE
  #undef  IDSOPT_CONTROL_ENABLED
  #undef  IDSOPT_TRACING_ENABLED
  #undef  IDSOPT_PERF_ANALYSIS
  #undef  IDSOPT_HEAP_CHECKING
  #undef  IDSOPT_ERROR_TRAP_ENABLED
  #undef  IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
  #undef  IDSOPT_DEBUG_CODE_ENABLED
  #undef  IDSOPT_TRACE_USER_OPTIONS
  #undef  IDSOPT_TRACING_CONSOLE_HDTOUT
  #undef  IDSOPT_TRACING_CONSOLE_SERIALPORT
  #undef  IDSOPT_TRACING_CONSOLE_REDIRECT_IO

  #define IDSOPT_CONTROL_ENABLED    FALSE
  #define IDSOPT_TRACING_ENABLED    FALSE
  #define IDSOPT_PERF_ANALYSIS      FALSE
  #define IDSOPT_HEAP_CHECKING      FALSE
  #define IDSOPT_ERROR_TRAP_ENABLED FALSE
  #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE
  #define IDSOPT_DEBUG_CODE_ENABLED FALSE
  #define IDSOPT_TRACE_USER_OPTIONS FALSE
  #define IDSOPT_TRACING_CONSOLE_HDTOUT FALSE
  #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE
  #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE
#endif

//Disable when master token Tracing is set to FALSE
#if (IDSOPT_TRACING_ENABLED == FALSE) || (defined (IDSOPT_CUSTOMIZE_TRACING_SERVICE))
  #undef  IDSOPT_TRACING_CONSOLE_HDTOUT
  #define IDSOPT_TRACING_CONSOLE_HDTOUT FALSE

  #undef  IDSOPT_TRACING_CONSOLE_SERIALPORT
  #define IDSOPT_TRACING_CONSOLE_SERIALPORT FALSE

  #undef IDSOPT_TRACING_CONSOLE_REDIRECT_IO
  #define IDSOPT_TRACING_CONSOLE_REDIRECT_IO FALSE
#endif

//Disable Tracing if all support HW layer set to FALSE
#if ((IDSOPT_TRACING_CONSOLE_HDTOUT == FALSE) && (IDSOPT_TRACING_CONSOLE_SERIALPORT == FALSE) && (IDSOPT_TRACING_CONSOLE_REDIRECT_IO == FALSE))
  #ifndef IDSOPT_CUSTOMIZE_TRACING_SERVICE
    #undef  IDSOPT_TRACING_ENABLED
    #define IDSOPT_TRACING_ENABLED FALSE
  #endif
#endif
/**
 *  Make a Progress Report to the User.
 *
 *  This Macro is always enabled. The default action is to write the TestPoint value
 *  to an I/O port. The I/O port is 8 bits in size and the default address is 0x80.
 *  IBVs can change AGESA's default port by defining IDS_DEBUG_PORT to desired port
 *  in OptionsIds.h in their build tip.
 *
 *  @param[in]      TestPoint       The value for display indicating progress
 *  @param[in,out]  StdHeader       Pointer of AMD_CONFIG_PARAMS
 *
 **/

#define AGESA_TESTPOINT(TestPoint, StdHeader) IdsAgesaTestPoint ((TestPoint), (StdHeader))

#ifndef IDS_DEBUG_PORT
  #define IDS_DEBUG_PORT  0x80
#endif

/**
 * @def STOP_HERE
 *  (macro) - Causes program to halt. This is @b only for use during active debugging .
 *
 *  Causes the program to halt and display the file number of the source of the
 *  halt (displayed in decimal).
 *
 **/
#if IDSOPT_IDS_ENABLED == TRUE
  #ifdef STOP_CODE
    #undef STOP_CODE
  #endif
  #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \
                      ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \
                      (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000))
  #define STOP_HERE IdsErrorStop (STOP_CODE);
#else
  #define STOP_HERE  STOP_HERE_Needs_To_Be_Removed //"WARNING: Debug code needs to be removed for production builds."
#endif

#if IDSOPT_CAR_CORRUPTION_CHECK_ENABLED == TRUE
  #undef  IDSOPT_ERROR_TRAP_ENABLED
  #define IDSOPT_ERROR_TRAP_ENABLED TRUE
  #define IDS_CAR_CORRUPTION_CHECK(StdHeader)  IdsCarCorruptionCheck(StdHeader)
#else
  #define IDS_CAR_CORRUPTION_CHECK(StdHeader)
#endif
/**
 * @def DEBUG_CODE
 * Make the code active when IDSOPT_DEBUG_CODE_ENABLED enable
 *
 */
#ifndef DEBUG_CODE
  #if IDSOPT_DEBUG_CODE_ENABLED == TRUE
    #define  DEBUG_CODE(Code) Code
  #else
    #define  DEBUG_CODE(Code)
  #endif
#endif

/**
 * @def IDS_ERROR_TRAP
 * Trap AGESA Error events with stop code display.
 *
 * Works similarly to use of "ASSERT (FALSE);"
 *
 */
#if IDSOPT_ERROR_TRAP_ENABLED == TRUE
  #ifdef STOP_CODE
    #undef STOP_CODE
  #endif
  #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \
                      ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \
                      (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000))

  #define IDS_ERROR_TRAP  IdsErrorStop (STOP_CODE)
#else
  #define IDS_ERROR_TRAP
#endif

///give the extended Macro default value
#ifndef __IDS_EXTENDED__
  #define IDS_EXTENDED_HOOK(idsoption, dataptr, idsnvptr, stdheader) IDS_SUCCESS
  #define IDS_TRACE_DEFAULT (0)
  #define IDS_INITIAL_F10_PM_STEP
  #define IDS_INITIAL_F12_PM_STEP
  #define IDS_INITIAL_F14_PM_STEP
  #define IDS_INITIAL_F15_OR_PM_STEP
  #define IDS_INITIAL_F15_TN_PM_STEP
  #define IDS_F15_TN_PM_CUSTOM_STEP
  #define IDS_EXTENDED_GET_DATA_EARLY(data, StdHeader)
  #define IDS_EXTENDED_GET_DATA_LATE(data, StdHeader)
  #define IDS_EXTENDED_HEAP_SIZE 0
  #define IDS_EXT_INCLUDE_F10(file)
  #define IDS_EXT_INCLUDE_F12(file)
  #define IDS_EXT_INCLUDE_F14(file)
  #define IDS_EXT_INCLUDE_F15(file)
  #define IDS_EXT_INCLUDE(file)
  #define IDS_PAD_4K
  #define IDS_EXTENDED_CODE(code)
#endif

#ifndef IDS_NUM_NV_ITEM
  #define IDS_NUM_NV_ITEM (IDS_NUM_EXT_NV_ITEM)
#endif

#define IDS_CMOS_INDEX_PORT 0x70
#define IDS_CMOS_DATA_PORT 0x71
#define IDS_CMOS_REGION_START 0x20
#define IDS_CMOS_REGION_END 0x7F
#define IDS_AP_GET_NV_FROM_CMOS(x) FALSE

#if IDSOPT_CONTROL_ENABLED == TRUE
  #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader) \
          AmdIdsCtrlDispatcher ((IdsOption), (DataPtr), (StdHeader))

  #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) \
          IdsOptionCallout ((CallOutId), (DataPtr), (StdHeader))
  #if IDSOPT_CONTROL_NV_TO_CMOS == TRUE
    #undef IDS_AP_GET_NV_FROM_CMOS
    #define IDS_AP_GET_NV_FROM_CMOS(x) AmdIdsApGetNvFromCmos(x)
    #ifdef IDS_OPT_CMOS_INDEX_PORT
      #undef IDS_CMOS_INDEX_PORT
      #define IDS_CMOS_INDEX_PORT IDS_OPT_CMOS_INDEX_PORT
    #endif

    #ifdef IDS_OPT_CMOS_DATA_PORT
      #undef IDS_CMOS_DATA_PORT
      #define IDS_CMOS_DATA_PORT IDS_OPT_CMOS_DATA_PORT
    #endif

    #ifdef IDS_OPT_CMOS_REGION_START
      #undef IDS_CMOS_REGION_START
      #define IDS_CMOS_REGION_START IDS_OPT_CMOS_REGION_START
    #endif

    #ifdef IDS_OPT_CMOS_REGION_END
      #undef IDS_CMOS_REGION_END
      #define IDS_CMOS_REGION_END IDS_OPT_CMOS_REGION_END
    #endif
  #endif
#else
  #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader)

  #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) //AGESA_SUCCESS
#endif

/**
 *  Macro to add a *skip* hook for IDS options
 *
 *  The default minimal action is to do nothing and there is no any code to increase.
 *  For debug environments, IDS dispatcher function will be called to perform
 *  the detailed action and to skip AGESA code if necessary.
 *
 * @param[in]       IdsOption       IDS Option ID for this hook point
 * @param[in, out]  DataPtr         Data Pointer to override
 * @param[in, out]  StdHeader       Pointer of AMD_CONFIG_PARAMS
 *
 *
 **/

#if IDSOPT_CONTROL_ENABLED == TRUE
  #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader) \
          if (AmdIdsCtrlDispatcher (IdsOption, DataPtr, StdHeader) == IDS_SUCCESS)
#else
  #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader)
#endif

/**
 *  Macro to add a heap manager routine
 *
 *  when memory is allocated the heap manager actually allocates two extra dwords of data,
 *  one dword buffer before the actual memory, and one dword afterwards.
 *  a complete heap walk and check to be performed at any time.
 *  it would ASSERT if the heap is corrupt
 *
 * @param[in]  StdHeader       Pointer of AMD_CONFIG_PARAMS
 *
 *
 **/

// Heap debug feature
#define SENTINEL_BEFORE_VALUE 0x64616548ul    // "Head"
#define SENTINEL_AFTER_VALUE  0x6C696154ul    // "Tail"
#if IDSOPT_IDS_ENABLED == TRUE
  #if IDSOPT_HEAP_CHECKING == TRUE
    #define SIZE_OF_SENTINEL  4
    #define NUM_OF_SENTINEL   2             // Before ("Head") and After ("Tail")
    #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + AlignTo16Byte) = SENTINEL_BEFORE_VALUE);
    #define SET_SENTINEL_AFTER(NodePtr) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + NodePtr->BufferSize - SIZE_OF_SENTINEL) = SENTINEL_AFTER_VALUE);
    #define Heap_Check(stdheader) AmdHeapIntactCheck(stdheader)
  #else
    #define SIZE_OF_SENTINEL  0
    #define NUM_OF_SENTINEL   0
    #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte)
    #define SET_SENTINEL_AFTER(NodePtr)
    #define Heap_Check(stdheader)
  #endif
#else
  #define SIZE_OF_SENTINEL    0
  #define NUM_OF_SENTINEL     0
  #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte)
  #define SET_SENTINEL_AFTER(NodePtr)
  #define Heap_Check(stdheader)
#endif

/**
 *  Macro to add IDT for debugging exception.
 *
 *  A debug feature. Adding a 'jmp $' into every exception handler.
 *  So debugger could use HDT to skip 'jmp $' and execute the iret,
 *  then they could find which instruction cause the exception.
 *
 * @param[in]       FunctionId      IDS Function ID for this hook point
 * @param[in, out]  DataPtr         Data Pointer to override
 * @param[in, out]  StdHeader       Pointer of AMD_CONFIG_PARAMS
 *
 *
 **/
#if IDSOPT_IDS_ENABLED == TRUE
  #if IDSOPT_IDT_EXCEPTION_TRAP == TRUE
    #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) IdsExceptionTrap (FunctionId, DataPtr, StdHeader)
  #else
    #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader)
  #endif
#else
  #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader)
#endif


 //Note a is from 0 to 63
#define DEBUG_PRINT_SHIFT(a)   ((UINT64)1 << a)
//If you change the Bitmap definition below, please change the Hash in ParseFilter of hdtout2008.pl accordingly
//Memory Masks
#define MEM_SETREG                                  DEBUG_PRINT_SHIFT (0)
#define MEM_GETREG                                  DEBUG_PRINT_SHIFT (1)
#define MEM_FLOW                                    DEBUG_PRINT_SHIFT (2)
#define MEM_STATUS                                  DEBUG_PRINT_SHIFT (3)
#define MEM_UNDEF_BF                                DEBUG_PRINT_SHIFT (4)
#define MEMORY_TRACE_RSV2                           DEBUG_PRINT_SHIFT (5)
#define MEMORY_TRACE_RSV3                           DEBUG_PRINT_SHIFT (6)
#define MEMORY_TRACE_RSV4                           DEBUG_PRINT_SHIFT (7)
#define MEMORY_TRACE_RSV5                           DEBUG_PRINT_SHIFT (8)
#define MEMORY_TRACE_RSV6                           DEBUG_PRINT_SHIFT (9)


//CPU Masks
#define CPU_TRACE                                   DEBUG_PRINT_SHIFT (10)
#define CPU_TRACE_RSV1                              DEBUG_PRINT_SHIFT (11)
#define CPU_TRACE_RSV2                              DEBUG_PRINT_SHIFT (12)
#define CPU_TRACE_RSV3                              DEBUG_PRINT_SHIFT (13)
#define CPU_TRACE_RSV4                              DEBUG_PRINT_SHIFT (14)
#define CPU_TRACE_RSV5                              DEBUG_PRINT_SHIFT (15)
#define CPU_TRACE_RSV6                              DEBUG_PRINT_SHIFT (16)
#define CPU_TRACE_RSV7                              DEBUG_PRINT_SHIFT (17)
#define CPU_TRACE_RSV8                              DEBUG_PRINT_SHIFT (18)
#define CPU_TRACE_RSV9                              DEBUG_PRINT_SHIFT (19)

//GNB Masks
#define GNB_TRACE                                   DEBUG_PRINT_SHIFT (20)
#define PCIE_MISC                                   DEBUG_PRINT_SHIFT (21)
#define PCIE_PORTREG_TRACE                          DEBUG_PRINT_SHIFT (22)
#define PCIE_HOSTREG_TRACE                          DEBUG_PRINT_SHIFT (23)
#define GNB_TRACE_RSV2                              DEBUG_PRINT_SHIFT (24)
#define NB_MISC                                     DEBUG_PRINT_SHIFT (25)
#define GNB_TRACE_RSV3                              DEBUG_PRINT_SHIFT (26)
#define GFX_MISC                                    DEBUG_PRINT_SHIFT (27)
#define NB_SMUREG_TRACE                             DEBUG_PRINT_SHIFT (28)
#define GNB_TRACE_RSV1                              DEBUG_PRINT_SHIFT (29)

//HT Masks
#define HT_TRACE                                    DEBUG_PRINT_SHIFT (30)
#define HT_TRACE_RSV1                               DEBUG_PRINT_SHIFT (31)
#define HT_TRACE_RSV2                               DEBUG_PRINT_SHIFT (32)
#define HT_TRACE_RSV3                               DEBUG_PRINT_SHIFT (33)
#define HT_TRACE_RSV4                               DEBUG_PRINT_SHIFT (34)
#define HT_TRACE_RSV5                               DEBUG_PRINT_SHIFT (35)
#define HT_TRACE_RSV6                               DEBUG_PRINT_SHIFT (36)
#define HT_TRACE_RSV7                               DEBUG_PRINT_SHIFT (37)
#define HT_TRACE_RSV8                               DEBUG_PRINT_SHIFT (38)
#define HT_TRACE_RSV9                               DEBUG_PRINT_SHIFT (39)

//FCH Masks
#define FCH_TRACE                                    DEBUG_PRINT_SHIFT (40)
#define FCH_TRACE_RSV1                               DEBUG_PRINT_SHIFT (41)
#define FCH_TRACE_RSV2                               DEBUG_PRINT_SHIFT (42)
#define FCH_TRACE_RSV3                               DEBUG_PRINT_SHIFT (43)
#define FCH_TRACE_RSV4                               DEBUG_PRINT_SHIFT (44)
#define FCH_TRACE_RSV5                               DEBUG_PRINT_SHIFT (45)
#define FCH_TRACE_RSV6                               DEBUG_PRINT_SHIFT (46)
#define FCH_TRACE_RSV7                               DEBUG_PRINT_SHIFT (47)
#define FCH_TRACE_RSV8                               DEBUG_PRINT_SHIFT (48)
#define FCH_TRACE_RSV9                               DEBUG_PRINT_SHIFT (49)

//Other Masks
#define MAIN_FLOW                                    DEBUG_PRINT_SHIFT (50)
#define EVENT_LOG                                    DEBUG_PRINT_SHIFT (51)
#define PERFORMANCE_ANALYSE                          DEBUG_PRINT_SHIFT (52)

//Ids Masks
#define IDS_TRACE                                    DEBUG_PRINT_SHIFT (53)
#define BVM_TRACE                                    DEBUG_PRINT_SHIFT (54)
#define IDS_TRACE_RSV2                               DEBUG_PRINT_SHIFT (55)
#define IDS_TRACE_RSV3                               DEBUG_PRINT_SHIFT (56)

//S3
#define S3_TRACE                                     DEBUG_PRINT_SHIFT (57)

//Library function to read/write PCI/MSR registers
#define LIB_PCI_RD                                   DEBUG_PRINT_SHIFT (58)
#define LIB_PCI_WR                                   DEBUG_PRINT_SHIFT (59)

//Reserved
#define TRACE_RSV3                                   DEBUG_PRINT_SHIFT (60)
#define TRACE_RSV4                                   DEBUG_PRINT_SHIFT (61)
#define TRACE_RSV5                                   DEBUG_PRINT_SHIFT (62)
#define TRACE_RSV6                                   DEBUG_PRINT_SHIFT (63)

#define GNB_TRACE_DEFAULT\
      (\
      GNB_TRACE | PCIE_MISC | NB_MISC | GFX_MISC \
      )

#define GNB_TRACE_REG\
      (\
      PCIE_PORTREG_TRACE | PCIE_HOSTREG_TRACE | \
      NB_SMUREG_TRACE | GNB_TRACE_RSV1 \
      )

#define GNB_TRACE_ALL\
      (\
      GNB_TRACE_DEFAULT | GNB_TRACE_REG \
      )

#define CPU_TRACE_ALL\
      (\
      CPU_TRACE | CPU_TRACE_RSV1 | CPU_TRACE_RSV2 | CPU_TRACE_RSV3 | \
      CPU_TRACE_RSV4 | CPU_TRACE_RSV5 | CPU_TRACE_RSV6 | CPU_TRACE_RSV7 | \
      CPU_TRACE_RSV8 | CPU_TRACE_RSV9\
      )

#define MEMORY_TRACE_ALL\
      (\
      MEM_FLOW | MEM_GETREG | MEM_SETREG | MEM_STATUS | \
      MEMORY_TRACE_RSV1 | MEMORY_TRACE_RSV2 | MEMORY_TRACE_RSV3 | MEMORY_TRACE_RSV4 | \
      MEMORY_TRACE_RSV5 | MEMORY_TRACE_RSV6\
      )

#define HT_TRACE_ALL\
      (\
      HT_TRACE | HT_TRACE_RSV1 | HT_TRACE_RSV2 | HT_TRACE_RSV3 | \
      HT_TRACE_RSV4 | HT_TRACE_RSV5 | HT_TRACE_RSV6 | HT_TRACE_RSV7 | \
      HT_TRACE_RSV8 | HT_TRACE_RSV9\
      )

#define FCH_TRACE_ALL\
      (\
      FCH_TRACE | FCH_TRACE_RSV1 | FCH_TRACE_RSV2 | FCH_TRACE_RSV3 | \
      FCH_TRACE_RSV4 | FCH_TRACE_RSV5 | FCH_TRACE_RSV6 | FCH_TRACE_RSV7 | \
      FCH_TRACE_RSV8 | FCH_TRACE_RSV9\
      )

#define IDS_TRACE_ALL\
      (\
      IDS_TRACE | BVM_TRACE | IDS_TRACE_RSV2 | IDS_TRACE_RSV3\
      )

#define OTHER_TRACE_ALL\
      (\
      MAIN_FLOW | EVENT_LOG | PERFORMANCE_ANALYSE\
      )


#define TRACE_MASK_ALL (0xFFFFFFFFFFFFFFFFull)
#ifndef IDS_DEBUG_PRINT_MASK
  #define IDS_DEBUG_PRINT_MASK (GNB_TRACE_DEFAULT  | CPU_TRACE_ALL | MEM_FLOW | MEM_STATUS | HT_TRACE_ALL | FCH_TRACE_ALL | MAIN_FLOW | IDS_TRACE_DEFAULT)
#endif

/// if no specific define INIT & EXIT will be NULL
#define IDS_HDT_CONSOLE_INIT(x)
#define IDS_HDT_CONSOLE_EXIT(x)

/// AGESA tracing service
#if IDSOPT_TRACING_ENABLED == TRUE
  #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE
    #define IDS_HDT_CONSOLE        IDSOPT_CUSTOMIZE_TRACING_SERVICE
    #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT
      #undef IDS_HDT_CONSOLE_INIT
      #define IDS_HDT_CONSOLE_INIT(x)           IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT (x)
    #endif
    #ifdef IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT
      #undef IDS_HDT_CONSOLE_EXIT
      #define IDS_HDT_CONSOLE_EXIT(x)           IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT (x)
    #endif
  #else
    #ifndef __GNUC__
      #pragma warning(disable: 4127)
      #define IDS_HDT_CONSOLE(f, s, ...)
    #else
      #define IDS_HDT_CONSOLE(f, s, ...) printk (BIOS_DEBUG, s, ##__VA_ARGS__);
    #endif
    #define CONSOLE            AmdIdsDebugPrintAll
  #endif
  #define IDS_HDT_CONSOLE_DEBUG_CODE(Code)  Code
  #define IDS_TIMEOUT_CTL(t)                IdsMemTimeOut (t)
#else
  #define IDS_HDT_CONSOLE           1 ? (VOID) 0 : AmdIdsDebugPrint
  #define IDS_HDT_CONSOLE_DEBUG_CODE(Code)
  #define CONSOLE   CONSOLE_Needs_To_Be_Removed_For_Production_Build //"WARNING: CONSOLE needs to be removed for production builds."
  #define IDS_TIMEOUT_CTL(t)
#endif

/// Macros for serial port tracing
#ifdef IDSOPT_SERIAL_PORT
  #define IDS_SERIAL_PORT IDSOPT_SERIAL_PORT
#endif

#ifndef IDS_SERIAL_PORT
  #define IDS_SERIAL_PORT 0x3F8
#endif

// Macros for redirect IO tracing
#ifdef IDSOPT_DEBUG_PRINT_IO_PORT
  #define IDS_DEBUG_PRINT_IO_PORT IDSOPT_DEBUG_PRINT_IO_PORT
#endif

#ifndef IDS_DEBUG_PRINT_IO_PORT
  #define IDS_DEBUG_PRINT_IO_PORT 0x80
#endif

/**
 *  Macros to add HDT OUT
 *
 *  The default minimal action is to do nothing and there is no any code to increase.
 *  For debug environments, the debug information can be displayed in HDT or other
 *  devices.
 *
 **/
#if IDSOPT_TRACING_CONSOLE_HDTOUT == TRUE
  #undef IDS_HDT_CONSOLE_INIT
  #undef IDS_HDT_CONSOLE_EXIT
  #define IDS_HDT_CONSOLE_INIT(x)           AmdIdsHdtOutInit (x)
  #define IDS_HDT_CONSOLE_EXIT(x)           AmdIdsHdtOutExit (x)
  #define IDS_HDT_CONSOLE_S3_EXIT(x)        AmdIdsHdtOutS3Exit (x)
  #define IDS_HDT_CONSOLE_S3_AP_EXIT(x)     AmdIdsHdtOutS3ApExit (x)

  #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x)   AmdIdsHdtOutBufferFlush (x)
  #define IDS_HDT_CONSOLE_ASSERT(x)   AmdIdsDebugPrintAssert (x)
  #define IDS_FUNCLIST_ADDR                 ScriptFuncList
  #define IDS_FUNCLIST_EXTERN()             extern SCRIPT_FUNCTION ScriptFuncList[]
#else
  #define IDS_HDT_CONSOLE_S3_EXIT(x)
  #define IDS_HDT_CONSOLE_S3_AP_EXIT(x)
  #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x)
  #define IDS_HDT_CONSOLE_ASSERT(x)
  #define IDS_FUNCLIST_ADDR                 NULL
  #define IDS_FUNCLIST_EXTERN()
#endif

#define IDS_TRACE_SHOW_BLD_OPT_CFG  IDSOPT_TRACE_USER_OPTIONS

#if IDSOPT_PERF_ANALYSIS == TRUE
  #ifdef STOP_CODE
    #undef STOP_CODE
  #endif
  #define STOP_CODE (((UINT32)FILECODE)*0x10000ul + \
                        ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \
                        (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000))

  #define IDS_PERF_TIMESTAMP(StdHeader)  IdsPerfTimestamp (STOP_CODE, (StdHeader))
  #define IDS_PERF_ANALYSE(StdHeader)   IdsPerfAnalyseTimestamp (StdHeader)
#else
  #define IDS_PERF_TIMESTAMP(StdHeader)
  #define IDS_PERF_ANALYSE(StdHeader)
#endif

///For IDS feat use
#define IDS_FAMILY_ALL  0xFFFFFFFFFFFFFFFFull
#define IDS_BSP_ONLY    TRUE
#define IDS_ALL_CORES   FALSE

#define IDS_LATE_RUN_AP_TASK_ID     PROC_IDS_LIBRARY_IDSLIB_FILECODE

#define IDS_CALLOUT_INIT      0x01                             ///< The function data of IDS callout function of initialization.

#define IDS_CALLOUT_GNB_PPFUSE_OVERRIDE           0x83        ///< The function data of IDS callout function of GNB pp fuse table.
#define IDS_CALLOUT_GNB_INTEGRATED_TABLE_CONFIG   0x84        ///< The function data of IDS callout function of GNB integrated table.
#define IDS_CALLOUT_GNB_NB_POWERGATE_CONFIG       0x85        ///< The function data of IDS callout function of GNB NB power gate config.
#define IDS_CALLOUT_GNB_PCIE_POWERGATE_CONFIG     0x86        ///< The function data of IDS callout function of GNB PCIE power gateconfig.
#define IDS_CALLOUT_GNB_PCIE_PLATFORM_CONFIG      0x87        ///< The function data of IDS callout function of GNB pcie platform config.
#define IDS_CALLOUT_GNB_PCIE_PHY_CONFIG           0x88        ///< The function data of IDS callout function of GNB pcie PHY config.
#define IDS_CALLOUT_GNB_GMM_REGISTER_OVERRIDE     0x89        ///< The function data of IDS callout function of GNB GMM register override
#define IDS_CALLOUT_MTC1E_PLATFORM_CONFIG         0x8A        ///< The function data of IDS callout function of Message Triggered C1e platform config.
#define IDS_CALLOUT_FCH_INIT_RESET                0x8B        ///< The function data of IDS callout function of FchInitReset
#define IDS_CALLOUT_FCH_INIT_ENV                  0x8C        ///< The function data of IDS callout function of FchInitEnv.
#define IDS_CALLOUT_POWER_PLAN_INIT               0x8D        ///< The function data of IDS callout function of Override Power Plan Init
/// Function entry for HDT script to call
typedef struct _SCRIPT_FUNCTION {
  UINTN   FuncAddr;       ///< Function address in ROM
  CHAR8   FuncName[40];   ///< Function name
} SCRIPT_FUNCTION;

/// Data Structure for Mem ECC parameter override
typedef struct {
  IN BOOLEAN CfgEccRedirection;                   ///< ECC Redirection
  IN UINT16  CfgScrubDramRate;                    ///< Scrub Dram Rate
  IN UINT16  CfgScrubL2Rate;                      ///< Scrub L2Rate
  IN UINT16  CfgScrubL3Rate;                      ///< Scrub L3Rate
  IN UINT16  CfgScrubIcRate;                      ///< Scrub Ic Rate
  IN UINT16  CfgScrubDcRate;                      ///< Scrub Dc Rate
  IN BOOLEAN CfgEccSyncFlood;                     ///< ECC Sync Flood
} ECC_OVERRIDE_STRUCT;


/**
 *  AGESA Test Points
 *
 *  These are the values displayed to the user to indicate progress through boot.
 *  These can be used in a debug environment to stop the debugger at a specific
 *  test point:
 *  For SimNow!, this command
 *      bi 81 w vb 49
 *  will stop the debugger on one of the TracePoints (49 is the TP value in this example).
 *
 */
typedef enum {
  StartProcessorTestPoints,           ///< 00 Entry used for range testing for @b Processor related TPs

  // Memory test points
  TpProcMemBeforeMemDataInit,         ///< 01 .. Memory structure initialization (Public interface)
  TpProcMemBeforeSpdProcessing,       ///< 02 .. SPD Data processing  (Public interface)
  TpProcMemAmdMemAuto,                ///< 03 .. Memory configuration  (Public interface)
  TpProcMemDramInit,                  ///< 04 .. DRAM initialization
  TpProcMemSPDChecking,               ///< 05 ..
  TpProcMemModeChecking,              ///< 06 ..
  TpProcMemSpeedTclConfig,            ///< 07 .. Speed and TCL configuration
  TpProcMemSpdTiming,                 ///< 08 ..
  TpProcMemDramMapping,               ///< 09 ..
  TpProcMemPlatformSpecificConfig,    ///< 0A ..
  TPProcMemPhyCompensation,           ///< 0B ..
  TpProcMemStartDcts,                 ///< 0C ..
  TpProcMemBeforeDramInit,            ///< 0D .. (Public interface)
  TpProcMemPhyFenceTraining,          ///< 0E ..
  TpProcMemSynchronizeDcts,           ///< 0F ..
  TpProcMemSystemMemoryMapping,       ///< 10 ..
  TpProcMemMtrrConfiguration,         ///< 11 ..
  TpProcMemDramTraining,              ///< 12 ..
  TpProcMemBeforeAnyTraining,         ///< 13 .. (Public interface)
  TpProcMemWriteLevelizationTraining, ///< 14 ..
  TpProcMemWlFirstPass,               ///< 15 .. Below 800Mhz first pass start
  TpProcMemWlSecondPass,              ///< 16 .. Above 800Mhz second pass start
  TpProcMemWlTrainTargetDimm,         ///< 17 .. Target DIMM configured
  TpProcMemWlPrepDimms,               ///< 18 ..  Prepare DIMMS for WL
  TpProcMemWlConfigDimms,             ///< 19 ..  Configure DIMMS for WL
  TpProcMemReceiverEnableTraining,    ///< 1A ..
  TpProcMemRcvrStartSweep,            ///< 1B .. Start sweep loop
  TpProcMemRcvrSetDelay,              ///< 1C .. Set receiver Delay
  TpProcMemRcvrWritePattern,          ///< 1D .. Write test pattern
  TpProcMemRcvrReadPattern,           ///< 1E .. Read test pattern
  TpProcMemRcvrTestPattern,           ///< 1F .. Compare test pattern
  TpProcMemRcvrCalcLatency,           ///< 20 .. Calculate MaxRdLatency per channel
  TpProcMemReceiveDqsTraining,        ///< 21 ..
  TpProcMemRcvDqsSetDelay,            ///< 22 .. Set Write Data delay
  TpProcMemRcvDqsWritePattern,        ///< 23 .. Write test pattern
  TpProcMemRcvDqsStartSweep,          ///< 24 .. Start read sweep
  TpProcMemRcvDqsSetRcvDelay,         ///< 25 .. Set Receive DQS delay
  TpProcMemRcvDqsReadPattern,         ///< 26 .. Read Test pattern
  TpProcMemRcvDqsTstPattern,          ///< 27 .. Compare Test pattern
  TpProcMemRcvDqsResults,             ///< 28 .. Update results
  TpProcMemRcvDqsFindWindow,          ///< 29 .. Start Find passing window
  TpProcMemTransmitDqsTraining,       ///< 2A ..
  TpProcMemTxDqStartSweep,            ///< 2B .. Start write sweep
  TpProcMemTxDqSetDelay,              ///< 2C .. Set Transmit DQ delay
  TpProcMemTxDqWritePattern,          ///< 2D .. Write test pattern
  TpProcMemTxDqReadPattern,           ///< 2E .. Read Test pattern
  TpProcMemTxDqTestPattern,           ///< 2F .. Compare Test pattern
  TpProcMemTxDqResults,               ///< 30 .. Update results
  TpProcMemTxDqFindWindow,            ///< 31 .. Start Find passing window
  TpProcMemMaxRdLatencyTraining,      ///< 32 ..
  TpProcMemMaxRdLatStartSweep,        ///< 33 .. Start sweep
  TpProcMemMaxRdLatSetDelay,          ///< 34 .. Set delay
  TpProcMemMaxRdLatWritePattern,      ///< 35 .. Write test pattern
  TpProcMemMaxRdLatReadPattern,       ///< 36 .. Read Test pattern
  TpProcMemMaxRdLatTestPattern,       ///< 37 .. Compare Test pattern
  TpProcMemOnlineSpareInit,           ///< 38 .. Online Spare init
  TpProcMemBankInterleaveInit,        ///< 39 .. Bank Interleave Init
  TpProcMemNodeInterleaveInit,        ///< 3A .. Node Interleave Init
  TpProcMemChannelInterleaveInit,     ///< 3B .. Channel Interleave Init
  TpProcMemEccInitialization,         ///< 3C .. ECC initialization
  TpProcMemPlatformSpecificInit,      ///< 3D .. Platform Specific Init
  TpProcMemBeforeAgesaReadSpd,        ///< 3E .. Before callout for "AgesaReadSpd"
  TpProcMemAfterAgesaReadSpd,         ///< 3F .. After callout for "AgesaReadSpd"
  TpProcMemBeforeAgesaHookBeforeDramInit,    ///< 40 .. Before optional callout "AgesaHookBeforeDramInit"
  TpProcMemAfterAgesaHookBeforeDramInit,     ///< 41 .. After optional callout "AgesaHookBeforeDramInit"
  TpProcMemBeforeAgesaHookBeforeDQSTraining, ///< 42 .. Before optional callout "AgesaHookBeforeDQSTraining"
  TpProcMemAfterAgesaHookBeforeDQSTraining,  ///< 43 .. After optional callout "AgesaHookBeforeDQSTraining"
  TpProcMemBeforeAgesaHookBeforeExitSelfRef, ///< 44 .. Before optional callout "AgesaHookBeforeDramInit"
  TpProcMemAfterAgesaHookBeforeExitSelfRef,  ///< 45 .. After optional callout "AgesaHookBeforeDramInit"
  TpProcMemAfterMemDataInit,          ///< 46 .. After MemDataInit
  TpProcMemInitializeMCT,             ///< 47 .. Before InitializeMCT
  TpProcMemLvDdr3,                    ///< 48 .. Before LV DDR3
  TpProcMemInitMCT,                   ///< 49 .. Before InitMCT
  TpProcMemOtherTiming,               ///< 4A.. Before OtherTiming
  TpProcMemUMAMemTyping,              ///< 4B .. Before UMAMemTyping
  TpProcMemSetDqsEccTmgs,             ///< 4C .. Before SetDqsEccTmgs
  TpProcMemMemClr,                    ///< 4D .. Before MemClr
  TpProcMemOnDimmThermal,             ///< 4E .. Before On DIMM Thermal
  TpProcMemDmi,                       ///< 4F .. Before DMI
  TpProcMemEnd,                       ///< 50 .. End of memory code

  // CPU test points
  TpProcCpuEntryDmi,                  ///< 51 .. Entry point CreateDmiRecords
  TpProcCpuEntryPstate,               ///< 52 .. Entry point GenerateSsdt
  TpProcCpuEntryPstateLeveling,       ///< 53 .. Entry point PStateLeveling
  TpProcCpuEntryPstateGather,         ///< 54 .. Entry point PStateGatherData
  TpProcCpuEntryWhea,                 ///< 55 .. Entry point CreateAcpiWhea
  TpProcCpuEntrySrat,                 ///< 56 .. Entry point CreateAcpiSrat
  TpProcCpuEntrySlit,                 ///< 57 .. Entry point CreateAcpiSlit
  TpProcCpuProcessRegisterTables,     ///< 58 .. Register table processing
  TpProcCpuSetBrandID,                ///< 59 .. Set brand ID
  TpProcCpuLocalApicInit,             ///< 5A .. Initialize local APIC
  TpProcCpuLoadUcode,                 ///< 5B .. Load microcode patch
  TpProcCpuBeforePMFeatureInit,       ///< 5C .. BeforePM feature dispatch point
  TpProcCpuPowerMgmtInit,             ///< 5D .. Power Management table processing
  TpProcCpuEarlyFeatureInit,          ///< 5E .. Early feature dispatch point
  TpProcCpuCoreLeveling,              ///< 5F .. Core Leveling
  TpProcCpuApMtrrSync,                ///< 60 .. AP MTRR sync up
  TpProcCpuPostFeatureInit,           ///< 61 .. POST feature dispatch point
  TpProcCpuFeatureLeveling,           ///< 62 .. CPU Feature Leveling
  TpProcCpuBeforeRelinquishAPsFeatureInit,   ///< 63 .. Before Relinquishing control of APs feature dispatch point
  TpProcCpuBeforeAllocateWheaBuffer,  ///< 64 .. Before the WHEA init code calls out to allocate a buffer
  TpProcCpuAfterAllocateWheaBuffer,   ///< 65 .. After the WHEA init code calls out to allocate a buffer
  TpProcCpuBeforeAllocateSratBuffer,  ///< 66 .. Before the SRAT init code calls out to allocate a buffer
  TpProcCpuAfterAllocateSratBuffer,   ///< 67 .. After the SRAT init code calls out to allocate a buffer
  TpProcCpuBeforeLocateSsdtBuffer,    ///< 68 .. Before the P-state init code calls out to locate a buffer
  TpProcCpuAfterLocateSsdtBuffer,     ///< 69 .. After the P-state init code calls out to locate a buffer
  TpProcCpuBeforeAllocateSsdtBuffer,  ///< 6A .. Before the P-state init code calls out to allocate a buffer
  TpProcCpuAfterAllocateSsdtBuffer,   ///< 6B .. After the P-state init code calls out to allocate a buffer
  Agtp6c ,
  Agtp6d ,

  // HT test points
  TpProcHtEntry = 0x71,               ///< 71 .. Coherent Discovery begin (Public interface)
  TpProcHtTopology,                   ///< 72 .. Topology match, routing, begin
  TpProcHtManualNc,                   ///< 73 .. Manual Non-coherent Init begin
  TpProcHtAutoNc,                     ///< 74 .. Automatic Non-coherent init begin
  TpProcHtOptGather,                  ///< 75 .. Optimization: Gather begin
  TpProcHtOptRegang,                  ///< 76 .. Optimization: Regang begin
  TpProcHtOptLinks,                   ///< 77 .. Optimization: Link Begin
  TpProcHtOptSubLinks,                ///< 78 .. Optimization: Sublinks begin
  TpProcHtOptFinish,                  ///< 79 .. Optimization: Set begin
  TpProcHtTrafficDist,                ///< 7A .. Traffic Distribution begin
  TpProcHtTuning,                     ///< 7B .. Misc Tuning Begin
  TpProcHtDone,                       ///< 7C .. HT Init complete
  TpProcHtApMapEntry,                 ///< 7D .. AP HT: Init Maps begin
  TpProcHtApMapDone,                  ///< 7E .. AP HT: Complete

  // Extended memory test point
  TpProcMemSendMRS2 = 0x80,           ///< 80 .. Sending MRS2
  TpProcMemSendMRS3,                  ///< 81 .. Sedding MRS3
  TpProcMemSendMRS1,                  ///< 82 .. Sending MRS1
  TpProcMemSendMRS0,                  ///< 83 .. Sending MRS0
  TpProcMemContinPatternGenRead,      ///< 84 .. Continuous Pattern Read
  TpProcMemContinPatternGenWrite,     ///< 85 .. Continuous Pattern Write
  Agtp86 ,
  Agtp87 ,
  TpProcMemAfter2dTrainExtVrefChange, ///< 88 .. Mem: After optional callout to platfrom BIOS to change External Vref during 2d Training
  TpProcMemConfigureDCTForGeneral,    ///< 89 .. Configure DCT For General use begin
  TpProcMemProcConfigureDCTForTraining,    ///< 8A .. Configure DCT For training begin
  TpProcMemConfigureDCTNonExplicitSeq,///< 8B .. Configure DCT For Non-Explicit
  TpProcMemSynchronizeChannels,       ///< 8C .. Configure to Sync channels
  TpProcMemC6StorageAllocation,       ///< 8D .. Allocate C6 Storage

  StartNbTestPoints = 0x90,           ///< 90 Entry used for range testing for @b NorthBridge related TPs
  TpNbxxx,                            ///< 91 .
  EndNbTestPoints,                    ///< 92 End of TP range for NB

  StartFchTestPoints = 0xB0,          ///< B0 Entry used for range testing for @b FCH related TPs
  TpFchInitResetDispatching,          ///< B1 .. FCH InitReset dispatch point
  TpFchGppBeforePortTraining,         ///< B2 .. Before FCH GPP port training
  TpFchGppGen1PortPolling,            ///< B3 .. FCH GPP port polling with GEN1 speed
  TpFchGppGen2PortPolling,            ///< B4 .. FCH GPP port polling with GEN2 speed
  TpFchGppAfterPortTraining,          ///< B5 .. After FCH GPP port training
  TpFchInitEnvDispatching,            ///< B6 .. FCH InitEnv dispatch point
  TpFchInitMidDispatching,            ///< B7 .. FCH InitMid dispatch point
  TpFchInitLateDispatching,           ///< B8 .. FCH InitLate dispatch point
  TpFchGppHotPlugging,                ///< B9 .. FCH GPP hot plug event
  TpFchGppHotUnplugging,              ///< BA .. AFCH GPP hot unplug event
  TpFchInitS3EarlyDispatching,        ///< BB .. FCH InitS3Early dispatch point
  TpFchInitS3LateDispatching,         ///< BC .. FCH InitS3Late dispatch point
  EndFchTestPoints,                   ///< BF End of TP range for FCH

  // Interface test points
  TpIfAmdInitResetEntry = 0xC0,       ///< C0 .. Entry to AmdInitReset
  TpIfAmdInitResetExit,               ///< C1 .. Exiting from AmdInitReset
  TpIfAmdInitRecoveryEntry,           ///< C2 .. Entry to AmdInitRecovery
  TpIfAmdInitRecoveryExit,            ///< C3 .. Exiting from AmdInitRecovery
  TpIfAmdInitEarlyEntry,              ///< C4 .. Entry to AmdInitEarly
  TpIfAmdInitEarlyExit,               ///< C5 .. Exiting from AmdInitEarly
  TpIfAmdInitPostEntry,               ///< C6 .. Entry to AmdInitPost
  TpIfAmdInitPostExit,                ///< C7 .. Exiting from AmdInitPost
  TpIfAmdInitEnvEntry,                ///< C8 .. Entry to AmdInitEnv
  TpIfAmdInitEnvExit,                 ///< C9 .. Exiting from AmdInitEnv
  TpIfAmdInitMidEntry,                ///< CA .. Entry to AmdInitMid
  TpIfAmdInitMidExit,                 ///< CB .. Exiting from AmdInitMid
  TpIfAmdInitLateEntry,               ///< CC .. Entry to AmdInitLate
  TpIfAmdInitLateExit,                ///< CD .. Exiting from AmdInitLate
  TpIfAmdS3SaveEntry,                 ///< CE .. Entry to AmdS3Save
  TpIfAmdS3SaveExit,                  ///< CF .. Exiting from AmdS3Save
  TpIfAmdInitResumeEntry,             ///< D0 .. Entry to AmdInitResume
  TpIfAmdInitResumeExit,              ///< D1 .. Exiting from AmdInitResume
  TpIfAmdS3LateRestoreEntry,          ///< D2 .. Entry to AmdS3LateRestore
  TpIfAmdS3LateRestoreExit,           ///< D3 .. Exiting from AmdS3LateRestore
  TpIfAmdLateRunApTaskEntry,          ///< D4 .. Entry to AmdS3LateRestore
  TpIfAmdLateRunApTaskExit,           ///< D5 .. Exiting from AmdS3LateRestore
  TpIfAmdReadEventLogEntry,           ///< D6 .. Entry to AmdReadEventLog
  TpIfAmdReadEventLogExit,            ///< D7 .. Exiting from AmdReadEventLog
  TpIfAmdGetApicIdEntry,              ///< D8 .. Entry to AmdGetApicId
  TpIfAmdGetApicIdExit,               ///< D9 .. Exiting from AmdGetApicId
  TpIfAmdGetPciAddressEntry,          ///< DA .. Entry to AmdGetPciAddress
  TpIfAmdGetPciAddressExit,           ///< DB .. Exiting from AmdGetPciAddress
  TpIfAmdIdentifyCoreEntry,           ///< DC .. Entry to AmdIdentifyCore
  TpIfAmdIdentifyCoreExit,            ///< DD .. Exiting from AmdIdentifyCore
  TpIfBeforeRunApFromIds,             ///< DE .. After IDS calls out to run code on an AP
  TpIfAfterRunApFromIds,              ///< DF .. After IDS calls out to run code on an AP
  TpIfBeforeGetIdsData,               ///< E0 .. Before IDS calls out to get IDS data
  TpIfAfterGetIdsData,                ///< E1 .. After IDS calls out to get IDS data
  TpIfBeforeAllocateHeapBuffer,       ///< E2 .. Before the heap manager calls out to allocate a buffer
  TpIfAfterAllocateHeapBuffer,        ///< E3 .. After the heap manager calls out to allocate a buffer
  TpIfBeforeDeallocateHeapBuffer,     ///< E4 .. Before the heap manager calls out to deallocate a buffer
  TpIfAfterDeallocateHeapBuffer,      ///< E5 .. After the heap manager calls out to deallocate a buffer
  TpIfBeforeLocateHeapBuffer,         ///< E6 .. Before the heap manager calls out to locate a buffer
  TpIfAfterLocateHeapBuffer,          ///< E7 .. After the heap manager calls out to locate a buffer
  TpIfBeforeRunApFromAllAps,          ///< E8 .. Before the BSP calls out to run code on an AP
  TpIfAfterRunApFromAllAps,           ///< E9 .. After the BSP calls out to run code on an AP
  TpIfBeforeRunApFromAllCore0s,       ///< EA .. Before the BSP calls out to run code on an AP
  TpIfAfterRunApFromAllCore0s,        ///< EB .. After the BSP calls out to run code on an AP
  TpIfBeforeAllocateS3SaveBuffer,     ///< EC .. Before the S3 save code calls out to allocate a buffer
  TpIfAfterAllocateS3SaveBuffer,      ///< ED .. After the S3 save code calls out to allocate a buffer
  TpIfBeforeAllocateMemoryS3SaveBuffer,  ///< EE .. Before the memory S3 save code calls out to allocate a buffer
  TpIfAfterAllocateMemoryS3SaveBuffer,   ///< EF .. After the memory S3 save code calls out to allocate a buffer
  TpIfBeforeLocateS3PciBuffer,        ///< F0 .. Before the memory code calls out to locate a buffer
  TpIfAfterLocateS3PciBuffer,         ///< F1 .. After the memory code calls out to locate a buffer
  TpIfBeforeLocateS3CPciBuffer,       ///< F2 .. Before the memory code calls out to locate a buffer
  TpIfAfterLocateS3CPciBuffer,        ///< F3 .. After the memory code calls out to locate a buffer
  TpIfBeforeLocateS3MsrBuffer,        ///< F4 .. Before the memory code calls out to locate a buffer
  TpIfAfterLocateS3MsrBuffer,         ///< F5 .. After the memory code calls out to locate a buffer
  TpIfBeforeLocateS3CMsrBuffer,       ///< F6 .. Before the memory code calls out to locate a buffer
  TpIfAfterLocateS3CMsrBuffer,        ///< F7 .. After the memory code calls out to locate a buffer
  TpPerfUnit,                         ///< F8 .. The Unit of performance measure.
  EndAgesaTps = 0xFF,                 ///< Last defined AGESA TP
} AGESA_TP;

///Ids Feat description
typedef enum {
  IDS_FEAT_UCODE_UPDATE = 0x0000,   ///< Feat for Ucode Update
  IDS_FEAT_TARGET_PSTATE,           ///< Feat for Target Pstate
  IDS_FEAT_POSTPSTATE,              ///< Feat for Post Pstate
  IDS_FEAT_ECC_CTRL,                ///< Feat for Ecc Control
  IDS_FEAT_ECC_SYMBOL_SIZE,         ///< Feat for Ecc symbol size
  IDS_FEAT_DCT_ALLMEMCLK,           ///< Feat for all memory clock
  IDS_FEAT_DCT_GANGMODE,            ///< Feat for Dct gang mode
  IDS_FEAT_DCT_BURSTLENGTH,         ///< Feat for dct burst length
  IDS_FEAT_DCT_POWERDOWN,           ///< Feat for dct power down
  IDS_FEAT_DCT_DLLSHUTDOWN,         ///< Feat for dct dll shut down
  IDS_FEAT_PROBE_FILTER,            ///< Feat for probe filter
  IDS_FEAT_HDTOUT,                  ///< Feat for hdt out
  IDS_FEAT_HT_SETTING,              ///< Feat for Ht setting
  IDS_FEAT_GNB_PLATFORMCFG,         ///< Feat for override GNB platform config
  IDS_FEAT_CPB_CTRL,                ///< Feat for Config the Core peformance boost feature
  IDS_FEAT_HTC_CTRL,                ///< Feat for Hardware Thermal Control
  IDS_FEAT_MEMORY_MAPPING,          ///< Feat for Memory Mapping
  IDS_FEAT_POWER_POLICY,            ///< Feat for Power Policy
  IDS_FEAT_NV_TO_CMOS,              ///< Feat for Save BSP Nv to CMOS
  IDS_FEAT_COMMON,                  ///< Common Feat
  IDS_FEAT_END = 0xFF               ///< End of Common feat
} IDS_FEAT;

///Ids IDT table function ID
typedef enum {
  IDS_IDT_REPLACE_IDTR_FOR_BSC = 0x0000,   ///< Function ID for saving IDTR for BSC
  IDS_IDT_RESTORE_IDTR_FOR_BSC,            ///< Function ID for restoring IDTR for BSC
  IDS_IDT_UPDATE_EXCEPTION_VECTOR_FOR_AP,  ///< Function ID for updating exception vector
} IDS_IDT_FUNC_ID;

typedef IDS_STATUS IDS_COMMON_FUNC (
  IN OUT   VOID *DataPtr,
  IN OUT   AMD_CONFIG_PARAMS *StdHeader,
  IN       IDS_NV_ITEM *IdsNvPtr
  );

typedef IDS_COMMON_FUNC *PIDS_COMMON_FUNC;

/// Data Structure of IDS Feature block
typedef  struct _IDS_FAMILY_FEAT_STRUCT {
  IDS_FEAT  IdsFeat;      ///< Ids Feat ID
  BOOLEAN IsBsp;          ///< swith for Bsp check
  AGESA_IDS_OPTION IdsOption;   ///< IDS option
  UINT64 CpuFamily;       ///<
  PIDS_COMMON_FUNC  pf_idsoption;   ///<pointer to function
} IDS_FAMILY_FEAT_STRUCT;


/// Data Structure of IDS option
typedef  struct _IDS_OPTION_STRUCT {
  AGESA_IDS_OPTION idsoption;       ///< IDS option
  PIDS_COMMON_FUNC  pf_idsoption;   ///<pointer to function
} IDS_OPTION_STRUCT;

/// Data Structure of IDS option table
typedef struct _IDS_OPTION_STRUCT_TBL {
  UINT8 version;      ///<Version of IDS option table
  UINT16 size;        ///<Size of IDS option table
  CONST IDS_OPTION_STRUCT  *pIdsOptionStruct; ///<pointer to array of  structure
} IDS_OPTION_STRUCT_TBL;

#define IDS_NV_TO_CMOS_LEN_BYTE   1
#define IDS_NV_TO_CMOS_LEN_WORD   2
#define IDS_NV_TO_CMOS_LEN_END   0xFF
#define IDS_NV_TO_CMOS_ID_END   0xFFFF

/// Data struct of set/get NV to/from CMOS
typedef struct _IDS_NV_TO_CMOS {
  UINT8 Length;       ///< Length of NV
  UINT16 IDS_NV_ID; ///< IDS id
} IDS_NV_TO_CMOS;

IDS_STATUS
AmdIdsCtrlDispatcher (
  IN       AGESA_IDS_OPTION IdsOption,
  IN OUT   VOID *DataPtr,
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  );

AGESA_STATUS
IdsOptionCallout (
  IN       UINTN                CallOutId,
  IN OUT   VOID *DataPtr,
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  );

VOID
AmdIdsHdtOutInit (
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  );

VOID
AmdIdsHdtOutExit (
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  );

VOID
AmdIdsHdtOutS3Exit (
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  );

VOID
AmdIdsHdtOutS3ApExit (
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  );

VOID
AmdIdsDebugPrint (
  IN       UINT64 Flag,
  IN       CONST CHAR8 *Format,
  IN       ...
  );

VOID
AmdIdsDebugPrintHt (
  IN      CHAR8 *Format,
  IN      ...
  );

VOID
AmdIdsDebugPrintCpu (
  IN      CHAR8 *Format,
  IN      ...
  );

VOID
AmdIdsDebugPrintMem (
  IN      CHAR8 *Format,
  IN      ...
  );

VOID
AmdIdsDebugPrintGnb (
  IN      CHAR8 *Format,
  IN      ...
  );

VOID
AmdIdsDebugPrintAll (
  IN      CHAR8 *Format,
  IN      ...
  );

VOID
AmdIdsHdtOutBufferFlush (
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  );

VOID
IdsMemTimeOut (
  IN OUT   VOID *DataPtr
  );

VOID
IdsAgesaTestPoint (
  IN      AGESA_TP TestPoint,
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  );

/**
 * The engine code for ASSERT MACRO
 *
 * Halt execution with stop code display.  Stop Code is displayed on port 80, with rotation so that
 * it is visible on 8, 16, or 32 bit display.  The stop code is alternated with 0xDEAD on the display,
 * to help distinguish the stop code from a post code loop.
 * Additional features may be available if using simulation.
 *
 * @param[in]     FileCode    File code(define in FILECODE.h) mix with assert Line num.
 *
 */
BOOLEAN
IdsErrorStop (
  IN      UINT32 FileCode
  );

VOID
IdsDelay (VOID
);

BOOLEAN
AmdHeapIntactCheck (
  IN       AMD_CONFIG_PARAMS *StdHeader
  );

VOID
IdsCarCorruptionCheck (
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  );

IDS_STATUS
IdsExceptionTrap (
  IN       IDS_IDT_FUNC_ID IdsIdtFuncId,
  IN       VOID *DataPtr,
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  );

AGESA_STATUS
IdsPerfTimestamp (
  IN       UINT32 LineInFile,
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  );

AGESA_STATUS
IdsPerfAnalyseTimestamp (
  IN OUT   AMD_CONFIG_PARAMS *StdHeader
  );


#if IDSOPT_IDS_ENABLED == FALSE
  #undef IEM_SKIP_CODE
  #undef IEM_INSERT_CODE
#endif
#ifndef IEM_SKIP_CODE
  #define IEM_SKIP_CODE(L)
#endif
#ifndef IEM_INSERT_CODE
  #define IEM_INSERT_CODE(L, Fn, Parm)
#endif

#endif // _IDS_H_