blob: a095fb9f1f1ae5f0ebbea97398ed09977fe21492 [file] [log] [blame]
config SOC_INTEL_CANNONLAKE
bool
help
Intel Cannonlake support
if SOC_INTEL_CANNONLAKE
config CPU_SPECIFIC_OPTIONS
def_bool y
select ACPI_INTEL_HARDWARE_SLEEP_VALUES
select ACPI_NHLT
select ARCH_BOOTBLOCK_X86_32
select ARCH_RAMSTAGE_X86_32
select ARCH_ROMSTAGE_X86_32
select ARCH_VERSTAGE_X86_32
select BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if BOOT_DEVICE_SPI_FLASH
select BOOT_DEVICE_SUPPORTS_WRITES
select C_ENVIRONMENT_BOOTBLOCK
select CACHE_MRC_SETTINGS
select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM if RELOCATABLE_RAMSTAGE
select COMMON_FADT
select CPU_INTEL_FIRMWARE_INTERFACE_TABLE
select GENERIC_GPIO_LIB
select HAVE_FSP_GOP
select HAVE_HARD_RESET
select HAVE_INTEL_FIRMWARE
select HAVE_MONOTONIC_TIMER
select HAVE_SMI_HANDLER
select INTEL_GMA_ACPI
select INTEL_GMA_ADD_VBT_DATA_FILE if RUN_FSP_GOP
select IOAPIC
select MRC_SETTINGS_PROTECT
select PARALLEL_MP
select PARALLEL_MP_AP_WORK
select PLATFORM_USES_FSP2_0
select POSTCAR_CONSOLE
select POSTCAR_STAGE
select REG_SCRIPT
select RELOCATABLE_MODULES
select RELOCATABLE_RAMSTAGE
select SMM_TSEG
select SMP
select SOC_AHCI_PORT_IMPLEMENTED_INVERT
select SOC_INTEL_COMMON
select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE
select SOC_INTEL_COMMON_BLOCK
select SOC_INTEL_COMMON_BLOCK_ACPI
select SOC_INTEL_COMMON_BLOCK_CPU
select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT
select SOC_INTEL_COMMON_BLOCK_CSE
select SOC_INTEL_COMMON_BLOCK_DSP
select SOC_INTEL_COMMON_BLOCK_EBDA
select SOC_INTEL_COMMON_BLOCK_FAST_SPI
select SOC_INTEL_COMMON_BLOCK_GPIO
select SOC_INTEL_COMMON_BLOCK_GRAPHICS
select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2
select SOC_INTEL_COMMON_BLOCK_ITSS
select SOC_INTEL_COMMON_BLOCK_I2C
select SOC_INTEL_COMMON_BLOCK_LPC
select SOC_INTEL_COMMON_BLOCK_LPSS
select SOC_INTEL_COMMON_BLOCK_P2SB
select SOC_INTEL_COMMON_BLOCK_PCR
select SOC_INTEL_COMMON_BLOCK_PMC
select SOC_INTEL_COMMON_BLOCK_RTC
select SOC_INTEL_COMMON_BLOCK_SA
select SOC_INTEL_COMMON_BLOCK_SATA
select SOC_INTEL_COMMON_BLOCK_SCS
select SOC_INTEL_COMMON_BLOCK_SMBUS
select SOC_INTEL_COMMON_BLOCK_SMM
select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP
select SOC_INTEL_COMMON_BLOCK_SPI
select SOC_INTEL_COMMON_BLOCK_TIMER
select SOC_INTEL_COMMON_BLOCK_UART
select SOC_INTEL_COMMON_BLOCK_XDCI
select SOC_INTEL_COMMON_BLOCK_XHCI
select SOC_INTEL_COMMON_NHLT
select SOC_INTEL_COMMON_RESET
select SSE2
select SUPPORT_CPU_UCODE_IN_CBFS
select TSC_CONSTANT_RATE
select TSC_MONOTONIC_TIMER
select UDELAY_TSC
select UDK_2017_BINDING
select DISPLAY_FSP_VERSION_INFO
config UART_DEBUG
bool "Enable UART debug port."
default y
select CONSOLE_SERIAL
select BOOTBLOCK_CONSOLE
select DRIVERS_UART
select DRIVERS_UART_8250MEM_32
select NO_UART_ON_SUPERIO
config UART_FOR_CONSOLE
int "Index for LPSS UART port to use for console"
default 2 if DRIVERS_UART_8250MEM_32
default 0
help
Index for LPSS UART port to use for console:
0 = LPSS UART0, 1 = LPSS UART1, 2 = LPSS UART2
config DCACHE_RAM_BASE
default 0xfef00000
config DCACHE_RAM_SIZE
default 0x40000
help
The size of the cache-as-ram region required during bootblock
and/or romstage.
config DCACHE_BSP_STACK_SIZE
hex
default 0x4000
help
The amount of anticipated stack usage in CAR by bootblock and
other stages.
config IFD_CHIPSET
string
default "cnl"
config IED_REGION_SIZE
hex
default 0x400000
config HEAP_SIZE
hex
default 0x8000
config NHLT_DMIC_1CH_16B
bool
depends on ACPI_NHLT
default n
help
Include DSP firmware settings for 1 channel 16B DMIC array.
config NHLT_DMIC_2CH_16B
bool
depends on ACPI_NHLT
default n
help
Include DSP firmware settings for 2 channel 16B DMIC array.
config NHLT_DMIC_4CH_16B
bool
depends on ACPI_NHLT
default n
help
Include DSP firmware settings for 4 channel 16B DMIC array.
config NHLT_MAX98357
bool
depends on ACPI_NHLT
default n
help
Include DSP firmware settings for headset codec.
config NHLT_MAX98373
bool
depends on ACPI_NHLT
default n
help
Include DSP firmware settings for headset codec.
config NHLT_DA7219
bool
depends on ACPI_NHLT
default n
help
Include DSP firmware settings for headset codec.
config MAX_ROOT_PORTS
int
default 16
config SMM_TSEG_SIZE
hex
default 0x800000
config SMM_RESERVED_SIZE
hex
default 0x200000
config PCR_BASE_ADDRESS
hex
default 0xfd000000
help
This option allows you to select MMIO Base Address of sideband bus.
config CPU_BCLK_MHZ
int
default 100
config SOC_INTEL_CANNONLAKE_LPDDR4_INIT
bool
default n
config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ
int
default 120
config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
int
default 133
config SOC_INTEL_COMMON_BLOCK_GSPI_MAX
int
default 3
# Clock divider parameters for 115200 baud rate
config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL
hex
default 0x30
config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL
hex
default 0xc35
config CHROMEOS
select CHROMEOS_RAMOOPS_DYNAMIC
config VBOOT
select VBOOT_SEPARATE_VERSTAGE
select VBOOT_OPROM_MATTERS
select VBOOT_SAVE_RECOVERY_REASON_ON_REBOOT
select VBOOT_STARTS_IN_BOOTBLOCK
select VBOOT_VBNV_CMOS
select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH
config C_ENV_BOOTBLOCK_SIZE
hex
default 0x8000
choice
prompt "Cache-as-ram implementation"
default USE_CANNONLAKE_CAR_NEM_ENHANCED if MAINBOARD_HAS_CHROMEOS
default USE_CANNONLAKE_FSP_CAR
help
This option allows you to select how cache-as-ram (CAR) is set up.
config USE_CANNONLAKE_CAR_NEM_ENHANCED
bool "Enhanced Non-evict mode"
select SOC_INTEL_COMMON_BLOCK_CAR
select INTEL_CAR_NEM_ENHANCED
help
A current limitation of NEM (Non-Evict mode) is that code and data
sizes are derived from the requirement to not write out any modified
cache line. With NEM, if there is no physical memory behind the
cached area, the modified data will be lost and NEM results will be
inconsistent. ENHANCED NEM guarantees that modified data is always
kept in cache while clean data is replaced.
config USE_CANNONLAKE_FSP_CAR
bool "Use FSP CAR"
select FSP_CAR
help
Use FSP APIs to initialize and tear down the Cache-As-Ram.
endchoice
endif