/*
 * This file is part of the coreboot project.
 *
 * Copyright 2014 Google Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 */

#include <arch/asm.h>

.arm
ENTRY(stage_entry)
	/*
	 * Set the cpu to System mode with IRQ and FIQ disabled. Prefetch/Data
	 * aborts may happen early and crash before the abort handlers are
	 * installed, but at least the problem will show up near the code that
	 * causes it.
	 */
	msr	cpsr_cxf, #0xdf
	bl	_thumb_start
ENDPROC(stage_entry)

.thumb
ENTRY(_thumb_start)
	bl	arm_init_caches

	/*
	 * From Cortex-A Series Programmer's Guide:
	 * Only CPU 0 performs initialization. Other CPUs go into WFI
	 * to do this, first work out which CPU this is
	 * this code typically is run before any other initialization step
	 */
	mrc p15, 0, r1, c0, c0, 5	@ Read Multiprocessor Affinity Register
	and r1, r1, #0x3		@ Extract CPU ID bits
	cmp r1, #0
	bne wait_for_interrupt		@ If this is not core0, wait

	/*
	 * Initialize the stack to a known value. This is used to check for
	 * stack overflow later in the boot process.
	 */
	ldr	r0, =_stack
	ldr	r1, =_estack
	ldr	r2, =0xdeadbeef
init_stack_loop:
	str	r2, [r0]
	add	r0, #4
	cmp	r0, r1
	bne	init_stack_loop

	ldr	sp, =_estack       /* Set up stack pointer */
	bl	main

wait_for_interrupt:
	wfi
	mov	pc, lr			@ back to my caller
ENDPROC(_thumb_start)