/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2008-2010 Joseph Smith <joe@settoplinux.org>
 * Copyright (C) 2010 Stefan Reinauer <stepan@openbios.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <console/console.h>
#include <device/device.h>
#include <delay.h>
#include <drivers/intel/gma/int15.h>
#include <arch/io.h>
#include <arch/interrupt.h>

// setting the bit disables the led.
#define PARPORT_GPIO_LED_GREEN	(1 << 0)
#define PARPORT_GPIO_LED_ORANGE	(1 << 1)
#define PARPORT_GPIO_LED_RED	(1 << 2)
#define PARPORT_GPIO_IR_PORT	(1 << 6)

static u8 get_parport_gpio(void)
{
	return inb(0x378);
}

static void set_parport_gpio(u8 gpios)
{
	outb(gpios, 0x378);
}

static void parport_gpios(void)
{
	u8 pp_gpios = get_parport_gpio();

	/* disable red led */
	pp_gpios |= PARPORT_GPIO_LED_RED;
	set_parport_gpio(pp_gpios);

	pp_gpios = get_parport_gpio();

	printk(BIOS_DEBUG, "IP1000 GPIOs:\n");
	printk(BIOS_DEBUG, "  GPIO mask:  %02x\n", pp_gpios);
	printk(BIOS_DEBUG, "  green led:  %s\n",
			(pp_gpios & PARPORT_GPIO_LED_GREEN) ? "off" : "on");
	printk(BIOS_DEBUG, "  orange led: %s\n",
			(pp_gpios & PARPORT_GPIO_LED_ORANGE) ? "off" : "on");
	printk(BIOS_DEBUG, "  red led:    %s\n",
			(pp_gpios & PARPORT_GPIO_LED_RED) ? "off" : "on");
	printk(BIOS_DEBUG, "  IR port:    %s\n",
			(pp_gpios & PARPORT_GPIO_IR_PORT) ? "off" : "on");
}

static void flash_gpios(void)
{
	u8 manufacturer_id = read8((u8 *)0xffbc0000);
	u8 device_id = read8((u8 *)0xffbc0001);

	if ((manufacturer_id == 0x20) &&
		((device_id == 0x2c) || (device_id == 0x2d))) {
		printk(BIOS_DEBUG, "Detected ST M50FW0%c0 flash:\n",
				(device_id==0x2c)?'4':'8');
		u8 fgpi = read8((u8 *)0xffbc0100);
		printk(BIOS_DEBUG, "  FGPI0 [%c] FGPI1 [%c] FGPI2 [%c] FGPI3 [%c] FGPI4 [%c]\n",
			(fgpi & (1 << 0)) ? 'X' : ' ',
			(fgpi & (1 << 1)) ? 'X' : ' ',
			(fgpi & (1 << 2)) ? 'X' : ' ',
			(fgpi & (1 << 3)) ? 'X' : ' ',
			(fgpi & (1 << 4)) ? 'X' : ' ');
	} else {
		printk(BIOS_DEBUG, "No ST M50FW040/M50FW080 flash, don't read FGPI.\n");
	}
}

static void mainboard_init(device_t dev)
{
	parport_gpios();
	flash_gpios();
}

static void mainboard_enable(device_t dev)
{
	dev->ops->init = mainboard_init;
	install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
}

struct chip_operations mainboard_ops = {
	.enable_dev = mainboard_enable,
};