mb/google/rex/var/screebo: Remove Camera EEPROM off timing
Since the camera sensor and camera eeprom share GPP_A12, remove
the off timing to avoid issue of camera sensor loss, but this
will increase system power by 5mW.
(Before root cause, this is a short term workaround to unblock
function test.)
BUG=b:298126852
TEST=1. Run coldreboot/warmreboot check see if the camera sensor lost.
2. Run S0ix check to see if the camera function abnormal.
Change-Id: I49b6ecbfbf3dddd6575bdaaf9c8fd0ee6c09af25
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79647
Reviewed-by: Jason Z Chen <jason.z.chen@intel.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
diff --git a/src/mainboard/google/rex/variants/screebo/overridetree.cb b/src/mainboard/google/rex/variants/screebo/overridetree.cb
index 3af628d..3b62e02 100644
--- a/src/mainboard/google/rex/variants/screebo/overridetree.cb
+++ b/src/mainboard/google/rex/variants/screebo/overridetree.cb
@@ -553,10 +553,6 @@
register "on_seq.ops_cnt" = "1"
register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
- #_OFF
- register "off_seq.ops_cnt" = "1"
- register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
-
register "nvm_size" = "0x2000"
register "nvm_pagesize" = "1"
register "nvm_readonly" = "1"