soc/intel/tigerlake: Do initial SoC commit till ramstage
Clone entirely from Icelake
List of changes on top off initial icelake clone
1. Replace "Icelake" with "Tigerlake"
2. Replace "icl" with "tgl"
3. Replace "icp" with "tgp"
4. Rename structure based on Icelake with Tigerlake
5. Remove and clean below files
5.a Clean up upd override in fsp_params.c,
will be added once FSP available.
5.b Remove __weak functions from fsp_params.c
5.c Remove dGPU over PCIE enable Kconfig option
6. Add CPU/PCH/SA EDS document number and chapter number
7. Remove unnecessary headers from .c files based on review
Tiger Lake specific changes will follow in subsequent patches.
1. Include GPIO controller delta over ICL
2. FSP-S related UPD overrides as applicable
Change-Id: Id95e2fa9b7a7c6b3b9233d2c438b25a6c4904bbb
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36087
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/soc/intel/tigerlake/Kconfig b/src/soc/intel/tigerlake/Kconfig
new file mode 100644
index 0000000..014606b
--- /dev/null
+++ b/src/soc/intel/tigerlake/Kconfig
@@ -0,0 +1,213 @@
+config SOC_INTEL_TIGERLAKE
+ bool
+ help
+ Intel Tigerlake support
+
+if SOC_INTEL_TIGERLAKE
+
+config CPU_SPECIFIC_OPTIONS
+ def_bool y
+ select ACPI_INTEL_HARDWARE_SLEEP_VALUES
+ select ARCH_BOOTBLOCK_X86_32
+ select ARCH_RAMSTAGE_X86_32
+ select ARCH_ROMSTAGE_X86_32
+ select ARCH_VERSTAGE_X86_32
+ select BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if BOOT_DEVICE_SPI_FLASH
+ select BOOT_DEVICE_SUPPORTS_WRITES
+ select C_ENVIRONMENT_BOOTBLOCK
+ select CACHE_MRC_SETTINGS
+ select COMMON_FADT
+ select CPU_INTEL_FIRMWARE_INTERFACE_TABLE
+ select FSP_M_XIP
+ select GENERIC_GPIO_LIB
+ select HAVE_FSP_GOP
+ select INTEL_DESCRIPTOR_MODE_CAPABLE
+ select HAVE_SMI_HANDLER
+ select IDT_IN_EVERY_STAGE
+ select INTEL_GMA_ACPI
+ select INTEL_GMA_ADD_VBT if RUN_FSP_GOP
+ select IOAPIC
+ select MRC_SETTINGS_PROTECT
+ select PARALLEL_MP
+ select PARALLEL_MP_AP_WORK
+ select MICROCODE_BLOB_UNDISCLOSED
+ select PLATFORM_USES_FSP2_1
+ select REG_SCRIPT
+ select SMP
+ select SOC_AHCI_PORT_IMPLEMENTED_INVERT
+ select PMC_GLOBAL_RESET_ENABLE_LOCK
+ select SOC_INTEL_COMMON
+ select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE
+ select SOC_INTEL_COMMON_BLOCK
+ select SOC_INTEL_COMMON_BLOCK_ACPI
+ select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG
+ select SOC_INTEL_COMMON_BLOCK_CPU
+ select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT
+ select SOC_INTEL_COMMON_BLOCK_EBDA
+ select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2
+ select SOC_INTEL_COMMON_BLOCK_HDA
+ select SOC_INTEL_COMMON_BLOCK_SA
+ select SOC_INTEL_COMMON_BLOCK_SMM
+ select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP
+ select SOC_INTEL_COMMON_PCH_BASE
+ select SOC_INTEL_COMMON_RESET
+ select SSE2
+ select SUPPORT_CPU_UCODE_IN_CBFS
+ select TSC_MONOTONIC_TIMER
+ select UDELAY_TSC
+ select UDK_2017_BINDING
+ select DISPLAY_FSP_VERSION_INFO
+ select HECI_DISABLE_USING_SMM
+
+config DCACHE_RAM_BASE
+ default 0xfef00000
+
+config DCACHE_RAM_SIZE
+ default 0x40000
+ help
+ The size of the cache-as-ram region required during bootblock
+ and/or romstage.
+
+config DCACHE_BSP_STACK_SIZE
+ hex
+ default 0x20400
+ help
+ The amount of anticipated stack usage in CAR by bootblock and
+ other stages. In the case of FSP_USES_CB_STACK default value will be
+ sum of FSP-M stack requirement (128KiB) and CB romstage stack requirement (~1KiB).
+
+config FSP_TEMP_RAM_SIZE
+ hex
+ default 0x10000
+ help
+ The amount of anticipated heap usage in CAR by FSP.
+ Refer to Platform FSP integration guide document to know
+ the exact FSP requirement for Heap setup.
+
+config IFD_CHIPSET
+ string
+ default "tgl"
+
+config IED_REGION_SIZE
+ hex
+ default 0x400000
+
+config HEAP_SIZE
+ hex
+ default 0x8000
+
+config MAX_ROOT_PORTS
+ int
+ default 16
+
+config SMM_TSEG_SIZE
+ hex
+ default 0x800000
+
+config SMM_RESERVED_SIZE
+ hex
+ default 0x200000
+
+config PCR_BASE_ADDRESS
+ hex
+ default 0xfd000000
+ help
+ This option allows you to select MMIO Base Address of sideband bus.
+
+config MMCONF_BASE_ADDRESS
+ hex
+ default 0xc0000000
+
+config CPU_BCLK_MHZ
+ int
+ default 100
+
+config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ
+ int
+ default 120
+
+config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
+ int
+ default 133
+
+config SOC_INTEL_COMMON_BLOCK_GSPI_MAX
+ int
+ default 3
+
+config SOC_INTEL_I2C_DEV_MAX
+ int
+ default 6
+
+config SOC_INTEL_UART_DEV_MAX
+ int
+ default 3
+
+config CONSOLE_UART_BASE_ADDRESS
+ hex
+ default 0xfe032000
+ depends on INTEL_LPSS_UART_FOR_CONSOLE
+
+# Clock divider parameters for 115200 baud rate
+config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL
+ hex
+ default 0x30
+
+config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL
+ hex
+ default 0xc35
+
+config CHROMEOS
+ select CHROMEOS_RAMOOPS_DYNAMIC
+
+config VBOOT
+ select VBOOT_SEPARATE_VERSTAGE
+ select VBOOT_MUST_REQUEST_DISPLAY
+ select VBOOT_SAVE_RECOVERY_REASON_ON_REBOOT
+ select VBOOT_STARTS_IN_BOOTBLOCK
+ select VBOOT_VBNV_CMOS
+ select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH
+
+config C_ENV_BOOTBLOCK_SIZE
+ hex
+ default 0xC000
+
+config CBFS_SIZE
+ hex
+ default 0x200000
+
+choice
+ prompt "Cache-as-ram implementation"
+ default USE_TIGERLAKE_CAR_NEM_ENHANCED
+ help
+ This option allows you to select how cache-as-ram (CAR) is set up.
+
+config USE_TIGERLAKE_CAR_NEM_ENHANCED
+ bool "Enhanced Non-evict mode"
+ select SOC_INTEL_COMMON_BLOCK_CAR
+ select INTEL_CAR_NEM_ENHANCED
+ help
+ A current limitation of NEM (Non-Evict mode) is that code and data
+ sizes are derived from the requirement to not write out any modified
+ cache line. With NEM, if there is no physical memory behind the
+ cached area, the modified data will be lost and NEM results will be
+ inconsistent. ENHANCED NEM guarantees that modified data is always
+ kept in cache while clean data is replaced.
+
+config USE_TIGERLAKE_FSP_CAR
+ bool "Use FSP CAR"
+ select FSP_CAR
+ help
+ Use FSP APIs to initialize and tear down the Cache-As-Ram.
+
+endchoice
+
+config FSP_HEADER_PATH
+ string "Location of FSP headers"
+ default "src/vendorcode/intel/fsp/fsp2_0/tigerlake/"
+
+config FSP_FD_PATH
+ string
+ depends on FSP_USE_REPO
+ default "3rdparty/fsp/TigerLakeFspBinPkg/Fsp.fd"
+
+endif
diff --git a/src/soc/intel/tigerlake/Makefile.inc b/src/soc/intel/tigerlake/Makefile.inc
new file mode 100644
index 0000000..b402fa0
--- /dev/null
+++ b/src/soc/intel/tigerlake/Makefile.inc
@@ -0,0 +1,58 @@
+ifeq ($(CONFIG_SOC_INTEL_TIGERLAKE),y)
+
+subdirs-y += romstage
+subdirs-y += ../../../cpu/intel/microcode
+subdirs-y += ../../../cpu/intel/turbo
+subdirs-y += ../../../cpu/x86/lapic
+subdirs-y += ../../../cpu/x86/mtrr
+subdirs-y += ../../../cpu/x86/smm
+subdirs-y += ../../../cpu/x86/tsc
+
+# all (bootblock, verstage, romstage, postcar, ramstage)
+all-y += gspi.c
+all-y += i2c.c
+all-y += pmutil.c
+all-y += spi.c
+all-y += uart.c
+
+bootblock-y += bootblock/bootblock.c
+bootblock-y += bootblock/cpu.c
+bootblock-y += bootblock/pch.c
+bootblock-y += bootblock/report_platform.c
+bootblock-y += espi.c
+bootblock-y += gpio.c
+bootblock-y += p2sb.c
+
+romstage-y += espi.c
+romstage-y += gpio.c
+romstage-y += reset.c
+
+ramstage-y += acpi.c
+ramstage-y += chip.c
+ramstage-y += cpu.c
+ramstage-y += elog.c
+ramstage-y += espi.c
+ramstage-y += finalize.c
+ramstage-y += fsp_params.c
+ramstage-y += gpio.c
+ramstage-y += graphics.c
+ramstage-y += lockdown.c
+ramstage-y += p2sb.c
+ramstage-y += pmc.c
+ramstage-y += reset.c
+ramstage-y += smmrelocate.c
+ramstage-y += systemagent.c
+ramstage-y += sd.c
+
+smm-y += gpio.c
+smm-y += p2sb.c
+smm-y += pmc.c
+smm-y += pmutil.c
+smm-y += smihandler.c
+smm-y += uart.c
+
+
+CPPFLAGS_common += -I$(src)/soc/intel/tigerlake
+CPPFLAGS_common += -I$(src)/soc/intel/tigerlake/include
+
+endif
diff --git a/src/soc/intel/tigerlake/acpi.c b/src/soc/intel/tigerlake/acpi.c
new file mode 100644
index 0000000..225f4e8
--- /dev/null
+++ b/src/soc/intel/tigerlake/acpi.c
@@ -0,0 +1,248 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <device/mmio.h>
+#include <arch/smp/mpspec.h>
+#include <cbmem.h>
+#include <ec/google/chromeec/ec.h>
+#include <intelblocks/cpulib.h>
+#include <intelblocks/pmclib.h>
+#include <intelblocks/acpi.h>
+#include <soc/cpu.h>
+#include <soc/iomap.h>
+#include <soc/nvs.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/soc_chip.h>
+#include <string.h>
+#include <wrdd.h>
+
+/*
+ * List of supported C-states in this processor.
+ */
+enum {
+ C_STATE_C0, /* 0 */
+ C_STATE_C1, /* 1 */
+ C_STATE_C1E, /* 2 */
+ C_STATE_C6_SHORT_LAT, /* 3 */
+ C_STATE_C6_LONG_LAT, /* 4 */
+ C_STATE_C7_SHORT_LAT, /* 5 */
+ C_STATE_C7_LONG_LAT, /* 6 */
+ C_STATE_C7S_SHORT_LAT, /* 7 */
+ C_STATE_C7S_LONG_LAT, /* 8 */
+ C_STATE_C8, /* 9 */
+ C_STATE_C9, /* 10 */
+ C_STATE_C10, /* 11 */
+ NUM_C_STATES
+};
+
+#define MWAIT_RES(state, sub_state) \
+ { \
+ .addrl = (((state) << 4) | (sub_state)), \
+ .space_id = ACPI_ADDRESS_SPACE_FIXED, \
+ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL, \
+ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT, \
+ .access_size = ACPI_FFIXEDHW_FLAG_HW_COORD, \
+ }
+
+static const acpi_cstate_t cstate_map[NUM_C_STATES] = {
+ [C_STATE_C0] = {},
+ [C_STATE_C1] = {
+ .latency = 0,
+ .power = C1_POWER,
+ .resource = MWAIT_RES(0, 0),
+ },
+ [C_STATE_C1E] = {
+ .latency = 0,
+ .power = C1_POWER,
+ .resource = MWAIT_RES(0, 1),
+ },
+ [C_STATE_C6_SHORT_LAT] = {
+ .latency = C_STATE_LATENCY_FROM_LAT_REG(0),
+ .power = C6_POWER,
+ .resource = MWAIT_RES(2, 0),
+ },
+ [C_STATE_C6_LONG_LAT] = {
+ .latency = C_STATE_LATENCY_FROM_LAT_REG(0),
+ .power = C6_POWER,
+ .resource = MWAIT_RES(2, 1),
+ },
+ [C_STATE_C7_SHORT_LAT] = {
+ .latency = C_STATE_LATENCY_FROM_LAT_REG(0),
+ .power = C7_POWER,
+ .resource = MWAIT_RES(3, 0),
+ },
+ [C_STATE_C7_LONG_LAT] = {
+ .latency = C_STATE_LATENCY_FROM_LAT_REG(0),
+ .power = C7_POWER,
+ .resource = MWAIT_RES(3, 1),
+ },
+ [C_STATE_C7S_SHORT_LAT] = {
+ .latency = C_STATE_LATENCY_FROM_LAT_REG(0),
+ .power = C7_POWER,
+ .resource = MWAIT_RES(3, 2),
+ },
+ [C_STATE_C7S_LONG_LAT] = {
+ .latency = C_STATE_LATENCY_FROM_LAT_REG(0),
+ .power = C7_POWER,
+ .resource = MWAIT_RES(3, 3),
+ },
+ [C_STATE_C8] = {
+ .latency = C_STATE_LATENCY_FROM_LAT_REG(0),
+ .power = C8_POWER,
+ .resource = MWAIT_RES(4, 0),
+ },
+ [C_STATE_C9] = {
+ .latency = C_STATE_LATENCY_FROM_LAT_REG(0),
+ .power = C9_POWER,
+ .resource = MWAIT_RES(5, 0),
+ },
+ [C_STATE_C10] = {
+ .latency = C_STATE_LATENCY_FROM_LAT_REG(0),
+ .power = C10_POWER,
+ .resource = MWAIT_RES(6, 0),
+ },
+};
+
+static int cstate_set_non_s0ix[] = {
+ C_STATE_C1E,
+ C_STATE_C6_LONG_LAT,
+ C_STATE_C7S_LONG_LAT
+};
+
+static int cstate_set_s0ix[] = {
+ C_STATE_C1E,
+ C_STATE_C7S_LONG_LAT,
+ C_STATE_C10
+};
+
+acpi_cstate_t *soc_get_cstate_map(size_t *entries)
+{
+ static acpi_cstate_t map[MAX(ARRAY_SIZE(cstate_set_s0ix),
+ ARRAY_SIZE(cstate_set_non_s0ix))];
+ int *set;
+ int i;
+
+ config_t *config = config_of_soc();
+
+ int is_s0ix_enable = config->s0ix_enable;
+
+ if (is_s0ix_enable) {
+ *entries = ARRAY_SIZE(cstate_set_s0ix);
+ set = cstate_set_s0ix;
+ } else {
+ *entries = ARRAY_SIZE(cstate_set_non_s0ix);
+ set = cstate_set_non_s0ix;
+ }
+
+ for (i = 0; i < *entries; i++) {
+ memcpy(&map[i], &cstate_map[set[i]], sizeof(acpi_cstate_t));
+ map[i].ctype = i + 1;
+ }
+ return map;
+}
+
+void soc_power_states_generation(int core_id, int cores_per_package)
+{
+ config_t *config = config_of_soc();
+
+ if (config->eist_enable)
+ /* Generate P-state tables */
+ generate_p_state_entries(core_id, cores_per_package);
+}
+
+void soc_fill_fadt(acpi_fadt_t *fadt)
+{
+ const uint16_t pmbase = ACPI_BASE_ADDRESS;
+
+ config_t *config = config_of_soc();
+
+ if (!config->PmTimerDisabled) {
+ fadt->pm_tmr_blk = pmbase + PM1_TMR;
+ fadt->pm_tmr_len = 4;
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = fadt->pm_tmr_len * 8;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.access_size = 0;
+ fadt->x_pm_tmr_blk.addrl = pmbase + PM1_TMR;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+ }
+
+ if (config->s0ix_enable)
+ fadt->flags |= ACPI_FADT_LOW_PWR_IDLE_S0;
+}
+
+uint32_t soc_read_sci_irq_select(void)
+{
+ uintptr_t pmc_bar = soc_read_pmc_base();
+ return read32((void *)pmc_bar + IRQ_REG);
+}
+
+void acpi_create_gnvs(struct global_nvs_t *gnvs)
+{
+ config_t *config = config_of_soc();
+
+ /* Set unknown wake source */
+ gnvs->pm1i = -1;
+
+ /* CPU core count */
+ gnvs->pcnt = dev_count_cpu();
+
+ if (CONFIG(CONSOLE_CBMEM))
+ /* Update the mem console pointer. */
+ gnvs->cbmc = (uintptr_t)cbmem_find(CBMEM_ID_CONSOLE);
+
+ if (CONFIG(CHROMEOS)) {
+ /* Initialize Verified Boot data */
+ chromeos_init_chromeos_acpi(&(gnvs->chromeos));
+ if (CONFIG(EC_GOOGLE_CHROMEEC)) {
+ gnvs->chromeos.vbt2 = google_ec_running_ro() ?
+ ACTIVE_ECFW_RO : ACTIVE_ECFW_RW;
+ } else
+ gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO;
+ }
+
+ /* Enable DPTF based on mainboard configuration */
+ gnvs->dpte = config->dptf_enable;
+
+ /* Fill in the Wifi Region id */
+ gnvs->cid1 = wifi_regulatory_domain();
+
+ /* Set USB2/USB3 wake enable bitmaps. */
+ gnvs->u2we = config->usb2_wake_enable_bitmap;
+ gnvs->u3we = config->usb3_wake_enable_bitmap;
+}
+
+uint32_t acpi_fill_soc_wake(uint32_t generic_pm1_en,
+ const struct chipset_power_state *ps)
+{
+ /*
+ * WAK_STS bit is set when the system is in one of the sleep states
+ * (via the SLP_EN bit) and an enabled wake event occurs. Upon setting
+ * this bit, the PMC will transition the system to the ON state and
+ * can only be set by hardware and can only be cleared by writing a one
+ * to this bit position.
+ */
+
+ generic_pm1_en |= WAK_STS | RTC_EN | PWRBTN_EN;
+ return generic_pm1_en;
+}
+
+int soc_madt_sci_irq_polarity(int sci)
+{
+ return MP_IRQ_POLARITY_HIGH;
+}
diff --git a/src/soc/intel/tigerlake/chip.c b/src/soc/intel/tigerlake/chip.c
new file mode 100644
index 0000000..530893c
--- /dev/null
+++ b/src/soc/intel/tigerlake/chip.c
@@ -0,0 +1,175 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <fsp/api.h>
+#include <fsp/util.h>
+#include <intelblocks/acpi.h>
+#include <intelblocks/cfg.h>
+#include <intelblocks/itss.h>
+#include <intelblocks/xdci.h>
+#include <romstage_handoff.h>
+#include <soc/intel/common/vbt.h>
+#include <soc/itss.h>
+#include <soc/pci_devs.h>
+#include <soc/ramstage.h>
+#include <soc/soc_chip.h>
+
+#if CONFIG(HAVE_ACPI_TABLES)
+const char *soc_acpi_name(const struct device *dev)
+{
+ if (dev->path.type == DEVICE_PATH_DOMAIN)
+ return "PCI0";
+
+ if (dev->path.type != DEVICE_PATH_PCI)
+ return NULL;
+
+ switch (dev->path.pci.devfn) {
+ case SA_DEVFN_ROOT: return "MCHC";
+ case SA_DEVFN_IGD: return "GFX0";
+ case PCH_DEVFN_ISH: return "ISHB";
+ case PCH_DEVFN_XHCI: return "XHCI";
+ case PCH_DEVFN_USBOTG: return "XDCI";
+ case PCH_DEVFN_THERMAL: return "THRM";
+ case PCH_DEVFN_I2C0: return "I2C0";
+ case PCH_DEVFN_I2C1: return "I2C1";
+ case PCH_DEVFN_I2C2: return "I2C2";
+ case PCH_DEVFN_I2C3: return "I2C3";
+ case PCH_DEVFN_CSE: return "CSE1";
+ case PCH_DEVFN_CSE_2: return "CSE2";
+ case PCH_DEVFN_CSE_IDER: return "CSED";
+ case PCH_DEVFN_CSE_KT: return "CSKT";
+ case PCH_DEVFN_CSE_3: return "CSE3";
+ case PCH_DEVFN_SATA: return "SATA";
+ case PCH_DEVFN_UART2: return "UAR2";
+ case PCH_DEVFN_I2C4: return "I2C4";
+ case PCH_DEVFN_I2C5: return "I2C5";
+ case PCH_DEVFN_PCIE1: return "RP01";
+ case PCH_DEVFN_PCIE2: return "RP02";
+ case PCH_DEVFN_PCIE3: return "RP03";
+ case PCH_DEVFN_PCIE4: return "RP04";
+ case PCH_DEVFN_PCIE5: return "RP05";
+ case PCH_DEVFN_PCIE6: return "RP06";
+ case PCH_DEVFN_PCIE7: return "RP07";
+ case PCH_DEVFN_PCIE8: return "RP08";
+ case PCH_DEVFN_PCIE9: return "RP09";
+ case PCH_DEVFN_PCIE10: return "RP10";
+ case PCH_DEVFN_PCIE11: return "RP11";
+ case PCH_DEVFN_PCIE12: return "RP12";
+ case PCH_DEVFN_PCIE13: return "RP13";
+ case PCH_DEVFN_PCIE14: return "RP14";
+ case PCH_DEVFN_PCIE15: return "RP15";
+ case PCH_DEVFN_PCIE16: return "RP16";
+ case PCH_DEVFN_PCIE17: return "RP17";
+ case PCH_DEVFN_PCIE18: return "RP18";
+ case PCH_DEVFN_PCIE19: return "RP19";
+ case PCH_DEVFN_PCIE20: return "RP20";
+ case PCH_DEVFN_PCIE21: return "RP21";
+ case PCH_DEVFN_PCIE22: return "RP22";
+ case PCH_DEVFN_PCIE23: return "RP23";
+ case PCH_DEVFN_PCIE24: return "RP24";
+ case PCH_DEVFN_UART0: return "UAR0";
+ case PCH_DEVFN_UART1: return "UAR1";
+ case PCH_DEVFN_GSPI0: return "SPI0";
+ case PCH_DEVFN_GSPI1: return "SPI1";
+ case PCH_DEVFN_GSPI2: return "SPI2";
+ case PCH_DEVFN_EMMC: return "EMMC";
+ case PCH_DEVFN_SDCARD: return "SDXC";
+ /* Keeping ACPI device name coherent with ec.asl */
+ case PCH_DEVFN_ESPI: return "LPCB";
+ case PCH_DEVFN_P2SB: return "P2SB";
+ case PCH_DEVFN_PMC: return "PMC_";
+ case PCH_DEVFN_HDA: return "HDAS";
+ case PCH_DEVFN_SMBUS: return "SBUS";
+ case PCH_DEVFN_SPI: return "FSPI";
+ case PCH_DEVFN_GBE: return "IGBE";
+ case PCH_DEVFN_TRACEHUB:return "THUB";
+ }
+
+ return NULL;
+}
+#endif
+
+/* SoC rotine to fill GPIO PM mask and value for GPIO_MISCCFG register */
+static void soc_fill_gpio_pm_configuration(void)
+{
+ uint8_t value[TOTAL_GPIO_COMM];
+ const config_t *config = config_of_soc();
+
+ if (config->gpio_override_pm)
+ memcpy(value, config->gpio_pm, sizeof(uint8_t) *
+ TOTAL_GPIO_COMM);
+ else
+ memset(value, MISCCFG_ENABLE_GPIO_PM_CONFIG, sizeof(uint8_t) *
+ TOTAL_GPIO_COMM);
+
+ gpio_pm_configure(value, TOTAL_GPIO_COMM);
+}
+
+void soc_init_pre_device(void *chip_info)
+{
+ /* Snapshot the current GPIO IRQ polarities. FSP is setting a
+ * default policy that doesn't honor boards' requirements. */
+ itss_snapshot_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END);
+
+ /* Perform silicon specific init. */
+ fsp_silicon_init(romstage_handoff_is_resume());
+
+ /* Display FIRMWARE_VERSION_INFO_HOB */
+ fsp_display_fvi_version_hob();
+
+ /* Restore GPIO IRQ polarities back to previous settings. */
+ itss_restore_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END);
+
+ soc_fill_gpio_pm_configuration();
+}
+
+static void pci_domain_set_resources(struct device *dev)
+{
+ assign_resources(dev->link_list);
+}
+
+static struct device_operations pci_domain_ops = {
+ .read_resources = &pci_domain_read_resources,
+ .set_resources = &pci_domain_set_resources,
+ .scan_bus = &pci_domain_scan_bus,
+ #if CONFIG(HAVE_ACPI_TABLES)
+ .acpi_name = &soc_acpi_name,
+ #endif
+};
+
+static struct device_operations cpu_bus_ops = {
+ .read_resources = DEVICE_NOOP,
+ .set_resources = DEVICE_NOOP,
+ .enable_resources = DEVICE_NOOP,
+ .init = DEVICE_NOOP,
+ .acpi_fill_ssdt_generator = generate_cpu_entries,
+};
+
+static void soc_enable(struct device *dev)
+{
+ /* Set the operations if it is a special bus type */
+ if (dev->path.type == DEVICE_PATH_DOMAIN)
+ dev->ops = &pci_domain_ops;
+ else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER)
+ dev->ops = &cpu_bus_ops;
+}
+
+struct chip_operations soc_intel_tigerlake_ops = {
+ CHIP_NAME("Intel Tigerlake")
+ .enable_dev = &soc_enable,
+ .init = &soc_init_pre_device,
+};
diff --git a/src/soc/intel/tigerlake/chip.h b/src/soc/intel/tigerlake/chip.h
new file mode 100644
index 0000000..32dc02c
--- /dev/null
+++ b/src/soc/intel/tigerlake/chip.h
@@ -0,0 +1,280 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_CHIP_H_
+#define _SOC_CHIP_H_
+
+#include <intelblocks/cfg.h>
+#include <drivers/i2c/designware/dw_i2c.h>
+#include <intelblocks/gpio.h>
+#include <intelblocks/gspi.h>
+#include <stdint.h>
+#include <soc/gpe.h>
+#include <soc/gpio.h>
+#include <soc/pch.h>
+#include <soc/gpio_defs.h>
+#include <soc/pci_devs.h>
+#include <soc/pmc.h>
+#include <soc/serialio.h>
+#include <soc/usb.h>
+
+struct soc_intel_tigerlake_config {
+
+ /* Common struct containing soc config data required by common code */
+ struct soc_intel_common_config common_soc_config;
+
+ /* GPE configuration */
+ uint32_t gpe0_en_1; /* GPE0_EN_31_0 */
+ uint32_t gpe0_en_2; /* GPE0_EN_63_32 */
+ uint32_t gpe0_en_3; /* GPE0_EN_95_64 */
+ uint32_t gpe0_en_4; /* GPE0_EN_127_96 / GPE_STD */
+
+ /* Gpio group routed to each dword of the GPE0 block. Values are
+ * of the form GPP_[A:G] or GPD. */
+ uint8_t gpe0_dw0; /* GPE0_31_0 STS/EN */
+ uint8_t gpe0_dw1; /* GPE0_63_32 STS/EN */
+ uint8_t gpe0_dw2; /* GPE0_95_64 STS/EN */
+
+ /* Generic IO decode ranges */
+ uint32_t gen1_dec;
+ uint32_t gen2_dec;
+ uint32_t gen3_dec;
+ uint32_t gen4_dec;
+
+ /* Enable S0iX support */
+ int s0ix_enable;
+ /* Enable DPTF support */
+ int dptf_enable;
+
+ /* Deep SX enable for both AC and DC */
+ int deep_s3_enable_ac;
+ int deep_s3_enable_dc;
+ int deep_s5_enable_ac;
+ int deep_s5_enable_dc;
+
+ /* Deep Sx Configuration
+ * DSX_EN_WAKE_PIN - Enable WAKE# pin
+ * DSX_EN_LAN_WAKE_PIN - Enable LAN_WAKE# pin
+ * DSX_DIS_AC_PRESENT_PD - Disable pull-down on AC_PRESENT pin */
+ uint32_t deep_sx_config;
+
+ /* TCC activation offset */
+ uint32_t tcc_offset;
+
+ uint64_t PlatformMemorySize;
+ uint8_t SmramMask;
+ uint8_t MrcFastBoot;
+ uint32_t TsegSize;
+ uint16_t MmioSize;
+
+ /* DDR Frequency Limit. Maximum Memory Frequency Selections in Mhz.
+ * Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */
+ uint16_t DdrFreqLimit;
+
+ /* SAGV Low Frequency Selections in Mhz.
+ * Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */
+ uint16_t FreqSaGvLow;
+
+ /* SAGV Mid Frequency Selections in Mhz.
+ * Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */
+ uint16_t FreqSaGvMid;
+
+ /* System Agent dynamic frequency support. Only effects ULX/ULT CPUs.
+ * When enabled memory will be training at two different frequencies.
+ * 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled */
+ enum {
+ SaGv_Disabled,
+ SaGv_FixedLow,
+ SaGv_FixedMid,
+ SaGv_FixedHigh,
+ SaGv_Enabled,
+ } SaGv;
+
+
+ /* Rank Margin Tool. 1:Enable, 0:Disable */
+ uint8_t RMT;
+
+ /* USB related */
+ struct usb2_port_config usb2_ports[16];
+ struct usb3_port_config usb3_ports[10];
+ uint8_t SsicPortEnable;
+ /* Wake Enable Bitmap for USB2 ports */
+ uint16_t usb2_wake_enable_bitmap;
+ /* Wake Enable Bitmap for USB3 ports */
+ uint16_t usb3_wake_enable_bitmap;
+
+ /* SATA related */
+ uint8_t SataEnable;
+ uint8_t SataMode;
+ uint8_t SataSalpSupport;
+ uint8_t SataPortsEnable[8];
+ uint8_t SataPortsDevSlp[8];
+
+ /* Audio related */
+ uint8_t PchHdaEnable;
+ uint8_t PchHdaDspEnable;
+
+ /* Enable/Disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1 */
+ uint8_t PchHdaAudioLinkHda;
+ uint8_t PchHdaAudioLinkDmic0;
+ uint8_t PchHdaAudioLinkDmic1;
+ uint8_t PchHdaAudioLinkSsp0;
+ uint8_t PchHdaAudioLinkSsp1;
+ uint8_t PchHdaAudioLinkSsp2;
+ uint8_t PchHdaAudioLinkSndw1;
+ uint8_t PchHdaAudioLinkSndw2;
+ uint8_t PchHdaAudioLinkSndw3;
+ uint8_t PchHdaAudioLinkSndw4;
+
+ /* PCIe Root Ports */
+ uint8_t PcieRpEnable[CONFIG_MAX_ROOT_PORTS];
+ /* PCIe output clocks type to Pcie devices.
+ * 0-23: PCH rootport, 0x70: LAN, 0x80: unspecified but in use,
+ * 0xFF: not used */
+ uint8_t PcieClkSrcUsage[CONFIG_MAX_ROOT_PORTS];
+ /* PCIe ClkReq-to-ClkSrc mapping, number of clkreq signal assigned to
+ * clksrc. */
+ uint8_t PcieClkSrcClkReq[CONFIG_MAX_ROOT_PORTS];
+
+ /* SMBus */
+ uint8_t SmbusEnable;
+
+ /* eMMC and SD */
+ uint8_t ScsEmmcHs400Enabled;
+ /* Need to update DLL setting to get Emmc running at HS400 speed */
+ uint8_t EmmcUseCustomDlls;
+ uint32_t EmmcTxCmdDelayRegValue;
+ uint32_t EmmcTxDataDelay1RegValue;
+ uint32_t EmmcTxDataDelay2RegValue;
+ uint32_t EmmcRxCmdDataDelay1RegValue;
+ uint32_t EmmcRxCmdDataDelay2RegValue;
+ uint32_t EmmcRxStrobeDelayRegValue;
+
+ /* Enable if SD Card Power Enable Signal is Active High */
+ uint8_t SdCardPowerEnableActiveHigh;
+
+ /* Integrated Sensor */
+ uint8_t PchIshEnable;
+
+ /* Heci related */
+ uint8_t Heci3Enabled;
+
+ /* Gfx related */
+ uint8_t IgdDvmt50PreAlloc;
+ uint8_t InternalGfx;
+ uint8_t SkipExtGfxScan;
+
+ uint32_t GraphicsConfigPtr;
+ uint8_t Device4Enable;
+
+ /* GPIO IRQ Select. The valid value is 14 or 15 */
+ uint8_t GpioIrqRoute;
+ /* SCI IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23 */
+ uint8_t SciIrqSelect;
+ /* TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23 */
+ uint8_t TcoIrqSelect;
+ uint8_t TcoIrqEnable;
+
+ /* HeciEnabled decides the state of Heci1 at end of boot
+ * Setting to 0 (default) disables Heci1 and hides the device from OS */
+ uint8_t HeciEnabled;
+ /* PL2 Override value in Watts */
+ uint32_t tdp_pl2_override;
+ /* Intel Speed Shift Technology */
+ uint8_t speed_shift_enable;
+ /* Enable VR specific mailbox command
+ * 00b - no VR specific cmd sent
+ * 01b - VR mailbox cmd specifically for the MPS IMPV8 VR will be sent
+ * 10b - VR specific cmd sent for PS4 exit issue
+ * 11b - Reserved */
+ uint8_t SendVrMbxCmd;
+
+ /* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */
+ uint8_t eist_enable;
+
+ /* Enable C6 DRAM */
+ uint8_t enable_c6dram;
+
+ uint8_t PmTimerDisabled;
+
+ /* Desired platform debug type. */
+ enum {
+ DebugConsent_Disabled,
+ DebugConsent_DCI_DBC,
+ DebugConsent_DCI,
+ DebugConsent_USB3_DBC,
+ DebugConsent_XDP, /* XDP/Mipi60 */
+ DebugConsent_USB2_DBC,
+ } DebugConsent;
+ /*
+ * SerialIO device mode selection:
+ * PchSerialIoDisabled,
+ * PchSerialIoPci,
+ * PchSerialIoHidden,
+ * PchSerialIoLegacyUart,
+ * PchSerialIoSkipInit
+ */
+ uint8_t SerialIoI2cMode[CONFIG_SOC_INTEL_I2C_DEV_MAX];
+ uint8_t SerialIoGSpiMode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX];
+ uint8_t SerialIoUartMode[CONFIG_SOC_INTEL_UART_DEV_MAX];
+ /*
+ * GSPIn Default Chip Select Mode:
+ * 0:Hardware Mode,
+ * 1:Software Mode
+ */
+ uint8_t SerialIoGSpiCsMode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX];
+ /*
+ * GSPIn Default Chip Select State:
+ * 0: Low,
+ * 1: High
+ */
+ uint8_t SerialIoGSpiCsState[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX];
+
+ /* GPIO SD card detect pin */
+ unsigned int sdcard_cd_gpio;
+
+ /* Enable Pch iSCLK */
+ uint8_t pch_isclk;
+
+ /* CNVi BT Audio Offload: Enable/Disable BT Audio Offload. */
+ enum {
+ PLATFORM_POR,
+ FORCE_ENABLE,
+ FORCE_DISABLE,
+ } CnviBtAudioOffload;
+
+ /*
+ * Override GPIO PM configuration:
+ * 0: Use FSP default GPIO PM program,
+ * 1: coreboot to override GPIO PM program
+ */
+ uint8_t gpio_override_pm;
+
+ /*
+ * GPIO PM configuration: 0 to disable, 1 to enable power gating
+ * Bit 6-7: Reserved
+ * Bit 5: MISCCFG_GPSIDEDPCGEN
+ * Bit 4: MISCCFG_GPRCOMPCDLCGEN
+ * Bit 3: MISCCFG_GPRTCDLCGEN
+ * Bit 2: MISCCFG_GSXLCGEN
+ * Bit 1: MISCCFG_GPDPCGEN
+ * Bit 0: MISCCFG_GPDLCGEN
+ */
+ uint8_t gpio_pm[TOTAL_GPIO_COMM];
+};
+
+typedef struct soc_intel_tigerlake_config config_t;
+
+#endif
diff --git a/src/soc/intel/tigerlake/cpu.c b/src/soc/intel/tigerlake/cpu.c
new file mode 100644
index 0000000..4174cd2
--- /dev/null
+++ b/src/soc/intel/tigerlake/cpu.c
@@ -0,0 +1,268 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor CPU Datasheet
+ * Document number: 575683
+ * Chapter number: 15
+ */
+
+#include <arch/cpu.h>
+#include <console/console.h>
+#include <device/pci.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/x86/mp.h>
+#include <cpu/x86/msr.h>
+#include <cpu/intel/smm_reloc.h>
+#include <cpu/intel/turbo.h>
+#include <fsp/api.h>
+#include <intelblocks/cpulib.h>
+#include <intelblocks/mp_init.h>
+#include <intelblocks/msr.h>
+#include <romstage_handoff.h>
+#include <soc/cpu.h>
+#include <soc/msr.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/smm.h>
+#include <soc/soc_chip.h>
+
+static void soc_fsp_load(void)
+{
+ fsps_load(romstage_handoff_is_resume());
+}
+
+static void configure_isst(void)
+{
+ config_t *conf = config_of_soc();
+ msr_t msr;
+
+ if (conf->speed_shift_enable) {
+ /*
+ * Kernel driver checks CPUID.06h:EAX[Bit 7] to determine if HWP
+ * is supported or not. coreboot needs to configure MSR 0x1AA
+ * which is then reflected in the CPUID register.
+ */
+ msr = rdmsr(MSR_MISC_PWR_MGMT);
+ msr.lo |= MISC_PWR_MGMT_ISST_EN; /* Enable Speed Shift */
+ msr.lo |= MISC_PWR_MGMT_ISST_EN_INT; /* Enable Interrupt */
+ msr.lo |= MISC_PWR_MGMT_ISST_EN_EPP; /* Enable EPP */
+ wrmsr(MSR_MISC_PWR_MGMT, msr);
+ } else {
+ msr = rdmsr(MSR_MISC_PWR_MGMT);
+ msr.lo &= ~MISC_PWR_MGMT_ISST_EN; /* Disable Speed Shift */
+ msr.lo &= ~MISC_PWR_MGMT_ISST_EN_INT; /* Disable Interrupt */
+ msr.lo &= ~MISC_PWR_MGMT_ISST_EN_EPP; /* Disable EPP */
+ wrmsr(MSR_MISC_PWR_MGMT, msr);
+ }
+}
+
+static void configure_misc(void)
+{
+ msr_t msr;
+
+ config_t *conf = config_of_soc();
+
+ msr = rdmsr(IA32_MISC_ENABLE);
+ msr.lo |= (1 << 0); /* Fast String enable */
+ msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */
+ /* Set EIST status */
+ cpu_set_eist(conf->eist_enable);
+ wrmsr(IA32_MISC_ENABLE, msr);
+
+ /* Disable Thermal interrupts */
+ msr.lo = 0;
+ msr.hi = 0;
+ wrmsr(IA32_THERM_INTERRUPT, msr);
+
+ /* Enable package critical interrupt only */
+ msr.lo = 1 << 4;
+ msr.hi = 0;
+ wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr);
+
+ /* Enable PROCHOT */
+ msr = rdmsr(MSR_POWER_CTL);
+ msr.lo |= (1 << 0); /* Enable Bi-directional PROCHOT as an input*/
+ msr.lo |= (1 << 23); /* Lock it */
+ wrmsr(MSR_POWER_CTL, msr);
+}
+
+static void enable_lapic_tpr(void)
+{
+ msr_t msr;
+
+ msr = rdmsr(MSR_PIC_MSG_CONTROL);
+ msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */
+ wrmsr(MSR_PIC_MSG_CONTROL, msr);
+}
+
+static void configure_dca_cap(void)
+{
+ uint32_t feature_flag;
+ msr_t msr;
+
+ /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */
+ feature_flag = cpu_get_feature_flags_ecx();
+ if (feature_flag & CPUID_DCA) {
+ msr = rdmsr(IA32_PLATFORM_DCA_CAP);
+ msr.lo |= 1;
+ wrmsr(IA32_PLATFORM_DCA_CAP, msr);
+ }
+}
+
+static void enable_pm_timer_emulation(void)
+{
+ /* ACPI PM timer emulation */
+ msr_t msr;
+ /*
+ * The derived frequency is calculated as follows:
+ * (CTC_FREQ * msr[63:32]) >> 32 = target frequency.
+ * Back solve the multiplier so the 3.579545MHz ACPI timer
+ * frequency is used.
+ */
+ msr.hi = (3579545ULL << 32) / CTC_FREQ;
+ /* Set PM1 timer IO port and enable */
+ msr.lo = (EMULATE_DELAY_VALUE << EMULATE_DELAY_OFFSET_VALUE) |
+ EMULATE_PM_TMR_EN | (ACPI_BASE_ADDRESS + PM1_TMR);
+ wrmsr(MSR_EMULATE_PM_TIMER, msr);
+}
+
+static void set_energy_perf_bias(u8 policy)
+{
+ msr_t msr;
+ int ecx;
+
+ /* Determine if energy efficient policy is supported. */
+ ecx = cpuid_ecx(0x6);
+ if (!(ecx & (1 << 3)))
+ return;
+
+ /* Energy Policy is bits 3:0 */
+ msr = rdmsr(IA32_ENERGY_PERF_BIAS);
+ msr.lo &= ~0xf;
+ msr.lo |= policy & 0xf;
+ wrmsr(IA32_ENERGY_PERF_BIAS, msr);
+}
+
+static void configure_c_states(void)
+{
+ msr_t msr;
+
+ /* C-state Interrupt Response Latency Control 1 - package C6/C7 short */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_32768_NS | C_STATE_LATENCY_CONTROL_1_LIMIT;
+ wrmsr(MSR_C_STATE_LATENCY_CONTROL_1, msr);
+
+ /* C-state Interrupt Response Latency Control 2 - package C6/C7 long */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_32768_NS | C_STATE_LATENCY_CONTROL_2_LIMIT;
+ wrmsr(MSR_C_STATE_LATENCY_CONTROL_2, msr);
+
+ /* C-state Interrupt Response Latency Control 3 - package C8 */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_32768_NS |
+ C_STATE_LATENCY_CONTROL_3_LIMIT;
+ wrmsr(MSR_C_STATE_LATENCY_CONTROL_3, msr);
+
+ /* C-state Interrupt Response Latency Control 4 - package C9 */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_32768_NS |
+ C_STATE_LATENCY_CONTROL_4_LIMIT;
+ wrmsr(MSR_C_STATE_LATENCY_CONTROL_4, msr);
+
+ /* C-state Interrupt Response Latency Control 5 - package C10 */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_32768_NS |
+ C_STATE_LATENCY_CONTROL_5_LIMIT;
+ wrmsr(MSR_C_STATE_LATENCY_CONTROL_5, msr);
+}
+
+/* All CPUs including BSP will run the following function. */
+void soc_core_init(struct device *cpu)
+{
+ /* Clear out pending MCEs */
+ /* TODO(adurbin): This should only be done on a cold boot. Also, some
+ * of these banks are core vs package scope. For now every CPU clears
+ * every bank. */
+ mca_configure();
+
+ /* Enable the local CPU apics */
+ enable_lapic_tpr();
+ setup_lapic();
+
+ /* Configure c-state interrupt response time */
+ configure_c_states();
+
+ /* Configure Enhanced SpeedStep and Thermal Sensors */
+ configure_misc();
+
+ /* Configure Intel Speed Shift */
+ configure_isst();
+
+ /* Enable PM timer emulation */
+ enable_pm_timer_emulation();
+
+ /* Enable Direct Cache Access */
+ configure_dca_cap();
+
+ /* Set energy policy */
+ set_energy_perf_bias(ENERGY_POLICY_NORMAL);
+
+ /* Enable Turbo */
+ enable_turbo();
+}
+
+static void per_cpu_smm_trigger(void)
+{
+ /* Relocate the SMM handler. */
+ smm_relocate();
+}
+
+static void post_mp_init(void)
+{
+ /* Set Max Ratio */
+ cpu_set_max_ratio();
+
+ /*
+ * Now that all APs have been relocated as well as the BSP let SMIs
+ * start flowing.
+ */
+ smm_southbridge_enable(PWRBTN_EN | GBL_EN);
+
+ /* Lock down the SMRAM space. */
+ smm_lock();
+}
+
+static const struct mp_ops mp_ops = {
+ /*
+ * Skip Pre MP init MTRR programming as MTRRs are mirrored from BSP,
+ * that are set prior to ramstage.
+ * Real MTRRs programming are being done after resource allocation.
+ */
+ .pre_mp_init = soc_fsp_load,
+ .get_cpu_count = get_cpu_count,
+ .get_smm_info = smm_info,
+ .get_microcode_info = get_microcode_info,
+ .pre_mp_smm_init = smm_initialize,
+ .per_cpu_smm_trigger = per_cpu_smm_trigger,
+ .relocation_handler = smm_relocation_handler,
+ .post_mp_init = post_mp_init,
+};
+
+void soc_init_cpus(struct bus *cpu_bus)
+{
+ if (mp_init_with_smm(cpu_bus, &mp_ops))
+ printk(BIOS_ERR, "MP initialization failure.\n");
+}
diff --git a/src/soc/intel/tigerlake/elog.c b/src/soc/intel/tigerlake/elog.c
new file mode 100644
index 0000000..2ec6b41
--- /dev/null
+++ b/src/soc/intel/tigerlake/elog.c
@@ -0,0 +1,132 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2015 Intel Corporation.
+ * Copyright 2019 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <bootstate.h>
+#include <cbmem.h>
+#include <console/console.h>
+#include <stdint.h>
+#include <elog.h>
+#include <intelblocks/pmclib.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+
+static void pch_log_gpio_gpe(u32 gpe0_sts, u32 gpe0_en, int start)
+{
+ int i;
+
+ gpe0_sts &= gpe0_en;
+
+ for (i = 0; i <= 31; i++) {
+ if (gpe0_sts & (1 << i))
+ elog_add_event_wake(ELOG_WAKE_SOURCE_GPIO, i + start);
+ }
+}
+
+static void pch_log_wake_source(struct chipset_power_state *ps)
+{
+ /* Power Button */
+ if (ps->pm1_sts & PWRBTN_STS)
+ elog_add_event_wake(ELOG_WAKE_SOURCE_PWRBTN, 0);
+
+ /* RTC */
+ if (ps->pm1_sts & RTC_STS)
+ elog_add_event_wake(ELOG_WAKE_SOURCE_RTC, 0);
+
+ /* PCI Express (TODO: determine wake device) */
+ if (ps->pm1_sts & PCIEXPWAK_STS)
+ elog_add_event_wake(ELOG_WAKE_SOURCE_PCIE, 0);
+
+ /* PME (TODO: determine wake device) */
+ if (ps->gpe0_sts[GPE_STD] & PME_STS)
+ elog_add_event_wake(ELOG_WAKE_SOURCE_PME, 0);
+
+ /* Internal PME (TODO: determine wake device) */
+ if (ps->gpe0_sts[GPE_STD] & PME_B0_STS)
+ elog_add_event_wake(ELOG_WAKE_SOURCE_PME_INTERNAL, 0);
+
+ /* SMBUS Wake */
+ if (ps->gpe0_sts[GPE_STD] & SMB_WAK_STS)
+ elog_add_event_wake(ELOG_WAKE_SOURCE_SMBUS, 0);
+
+ /* Log GPIO events in set 1-3 */
+ pch_log_gpio_gpe(ps->gpe0_sts[GPE_31_0], ps->gpe0_en[GPE_31_0], 0);
+ pch_log_gpio_gpe(ps->gpe0_sts[GPE_63_32], ps->gpe0_en[GPE_63_32], 32);
+ pch_log_gpio_gpe(ps->gpe0_sts[GPE_95_64], ps->gpe0_en[GPE_95_64], 64);
+ /* Treat the STD as an extension of GPIO to obtain visibility. */
+ pch_log_gpio_gpe(ps->gpe0_sts[GPE_STD], ps->gpe0_en[GPE_STD], 96);
+}
+
+static void pch_log_power_and_resets(struct chipset_power_state *ps)
+{
+ /* Thermal Trip */
+ if (ps->gblrst_cause[0] & GBLRST_CAUSE0_THERMTRIP)
+ elog_add_event(ELOG_TYPE_THERM_TRIP);
+
+ /* PWR_FLR Power Failure */
+ if (ps->gen_pmcon_a & PWR_FLR)
+ elog_add_event(ELOG_TYPE_POWER_FAIL);
+
+ /* SUS Well Power Failure */
+ if (ps->gen_pmcon_a & SUS_PWR_FLR)
+ elog_add_event(ELOG_TYPE_SUS_POWER_FAIL);
+
+ /* TCO Timeout */
+ if (ps->prev_sleep_state != ACPI_S3 &&
+ ps->tco2_sts & TCO_STS_SECOND_TO)
+ elog_add_event(ELOG_TYPE_TCO_RESET);
+
+ /* Power Button Override */
+ if (ps->pm1_sts & PRBTNOR_STS)
+ elog_add_event(ELOG_TYPE_POWER_BUTTON_OVERRIDE);
+
+ /* RTC reset */
+ if (ps->gen_pmcon_b & RTC_BATTERY_DEAD)
+ elog_add_event(ELOG_TYPE_RTC_RESET);
+
+ /* Host Reset Status */
+ if (ps->gen_pmcon_a & HOST_RST_STS)
+ elog_add_event(ELOG_TYPE_SYSTEM_RESET);
+
+ /* ACPI Wake Event */
+ if (ps->prev_sleep_state != ACPI_S0)
+ elog_add_event_byte(ELOG_TYPE_ACPI_WAKE, ps->prev_sleep_state);
+}
+
+static void pch_log_state(void *unused)
+{
+ struct chipset_power_state *ps = pmc_get_power_state();
+
+ if (!ps) {
+ printk(BIOS_ERR, "chipset_power_state not found!\n");
+ return;
+ }
+
+ /* Power and Reset */
+ pch_log_power_and_resets(ps);
+
+ /* Wake Sources */
+ if (ps->prev_sleep_state > ACPI_S0)
+ pch_log_wake_source(ps);
+}
+
+BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_EXIT, pch_log_state, NULL);
+
+void elog_gsmi_cb_platform_log_wake_source(void)
+{
+ struct chipset_power_state ps;
+ pmc_fill_pm_reg_info(&ps);
+ pch_log_wake_source(&ps);
+}
diff --git a/src/soc/intel/tigerlake/espi.c b/src/soc/intel/tigerlake/espi.c
new file mode 100644
index 0000000..932f760
--- /dev/null
+++ b/src/soc/intel/tigerlake/espi.c
@@ -0,0 +1,248 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor PCH Datasheet
+ * Document number: 575857
+ * Chapter number: 2
+ */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <pc80/isa-dma.h>
+#include <pc80/i8259.h>
+#include <arch/io.h>
+#include <device/pci_ops.h>
+#include <arch/ioapic.h>
+#include <intelblocks/itss.h>
+#include <intelblocks/lpc_lib.h>
+#include <intelblocks/pcr.h>
+#include <reg_script.h>
+#include <soc/espi.h>
+#include <soc/iomap.h>
+#include <soc/irq.h>
+#include <soc/pci_devs.h>
+#include <soc/pcr_ids.h>
+#include <soc/soc_chip.h>
+
+/*
+* As per the BWG, Chapter 5.9.1. "PCH BIOS component will reserve
+* certain memory range as reserved range for BIOS usage.
+* For this SOC, the range will be from 0FC800000h till FE7FFFFFh"
+*/
+static const struct lpc_mmio_range tgl_lpc_fixed_mmio_ranges[] = {
+ { PCH_PRESERVED_BASE_ADDRESS, PCH_PRESERVED_BASE_SIZE },
+ { 0, 0 }
+};
+
+const struct lpc_mmio_range *soc_get_fixed_mmio_ranges()
+{
+ return tgl_lpc_fixed_mmio_ranges;
+}
+
+void soc_get_gen_io_dec_range(const struct device *dev, uint32_t *gen_io_dec)
+{
+ const config_t *config = config_of(dev);
+
+ gen_io_dec[0] = config->gen1_dec;
+ gen_io_dec[1] = config->gen2_dec;
+ gen_io_dec[2] = config->gen3_dec;
+ gen_io_dec[3] = config->gen4_dec;
+}
+
+void soc_setup_dmi_pcr_io_dec(uint32_t *gen_io_dec)
+{
+ /* Mirror these same settings in DMI PCR */
+ pcr_write32(PID_DMI, PCR_DMI_LPCLGIR1, gen_io_dec[0]);
+ pcr_write32(PID_DMI, PCR_DMI_LPCLGIR2, gen_io_dec[1]);
+ pcr_write32(PID_DMI, PCR_DMI_LPCLGIR3, gen_io_dec[2]);
+ pcr_write32(PID_DMI, PCR_DMI_LPCLGIR4, gen_io_dec[3]);
+}
+
+uint8_t get_pch_series(void)
+{
+ uint16_t lpc_did_hi_byte;
+
+ /*
+ * Fetch upper 8 bits on ESPI device ID to determine PCH type
+ * Adding 1 to the offset to fetch upper 8 bits
+ */
+ lpc_did_hi_byte = pci_read_config8(PCH_DEV_ESPI, PCI_DEVICE_ID + 1);
+
+ if (lpc_did_hi_byte == 0x9D)
+ return PCH_LP;
+ else if (lpc_did_hi_byte == 0xA3)
+ return PCH_H;
+ else
+ return PCH_UNKNOWN_SERIES;
+}
+
+#if ENV_RAMSTAGE
+static void soc_mirror_dmi_pcr_io_dec(void)
+{
+ struct device *dev = pcidev_on_root(PCH_DEV_SLOT_ESPI, 0);
+ uint32_t io_dec_arr[] = {
+ pci_read_config32(dev, ESPI_GEN1_DEC),
+ pci_read_config32(dev, ESPI_GEN2_DEC),
+ pci_read_config32(dev, ESPI_GEN3_DEC),
+ pci_read_config32(dev, ESPI_GEN4_DEC),
+ };
+ /* Mirror these same settings in DMI PCR */
+ soc_setup_dmi_pcr_io_dec(&io_dec_arr[0]);
+}
+
+static void pch_enable_ioapic(const struct device *dev)
+{
+ u32 reg32;
+ /* PCH-LP has 120 redirection entries */
+ const int redir_entries = 120;
+
+ set_ioapic_id((void *)IO_APIC_ADDR, 0x02);
+
+ /* affirm full set of redirection table entries ("write once") */
+ reg32 = io_apic_read((void *)IO_APIC_ADDR, 0x01);
+
+ reg32 &= ~0x00ff0000;
+ reg32 |= (redir_entries - 1) << 16;
+
+ io_apic_write((void *)IO_APIC_ADDR, 0x01, reg32);
+
+ /*
+ * Select Boot Configuration register (0x03) and
+ * use Processor System Bus (0x01) to deliver interrupts.
+ */
+ io_apic_write((void *)IO_APIC_ADDR, 0x03, 0x01);
+}
+/*
+ * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
+ * 0x00 - 0000 = Reserved
+ * 0x01 - 0001 = Reserved
+ * 0x02 - 0010 = Reserved
+ * 0x03 - 0011 = IRQ3
+ * 0x04 - 0100 = IRQ4
+ * 0x05 - 0101 = IRQ5
+ * 0x06 - 0110 = IRQ6
+ * 0x07 - 0111 = IRQ7
+ * 0x08 - 1000 = Reserved
+ * 0x09 - 1001 = IRQ9
+ * 0x0A - 1010 = IRQ10
+ * 0x0B - 1011 = IRQ11
+ * 0x0C - 1100 = IRQ12
+ * 0x0D - 1101 = Reserved
+ * 0x0E - 1110 = IRQ14
+ * 0x0F - 1111 = IRQ15
+ * PIRQ[n]_ROUT[7] - PIRQ Routing Control
+ * 0x80 - The PIRQ is not routed.
+ */
+
+void soc_pch_pirq_init(const struct device *dev)
+{
+ struct device *irq_dev;
+ uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG];
+
+ pch_interrupt_routing[0] = PCH_IRQ11;
+ pch_interrupt_routing[1] = PCH_IRQ10;
+ pch_interrupt_routing[2] = PCH_IRQ11;
+ pch_interrupt_routing[3] = PCH_IRQ11;
+ pch_interrupt_routing[4] = PCH_IRQ11;
+ pch_interrupt_routing[5] = PCH_IRQ11;
+ pch_interrupt_routing[6] = PCH_IRQ11;
+ pch_interrupt_routing[7] = PCH_IRQ11;
+
+ itss_irq_init(pch_interrupt_routing);
+
+ for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
+ u8 int_pin = 0, int_line = 0;
+
+ if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI)
+ continue;
+
+ int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
+
+ switch (int_pin) {
+ case 1: /* INTA# */
+ int_line = PCH_IRQ11;
+ break;
+ case 2: /* INTB# */
+ int_line = PCH_IRQ10;
+ break;
+ case 3: /* INTC# */
+ int_line = PCH_IRQ11;
+ break;
+ case 4: /* INTD# */
+ int_line = PCH_IRQ11;
+ break;
+ }
+
+ if (!int_line)
+ continue;
+
+ pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
+ }
+}
+
+static void pch_misc_init(void)
+{
+ uint8_t reg8;
+
+ /* Setup NMI on errors, disable SERR */
+ reg8 = (inb(0x61)) & 0xf0;
+ outb((reg8 | (1 << 2)), 0x61);
+
+ /* Disable NMI sources */
+ outb((1 << 7), 0x70);
+};
+
+void lpc_soc_init(struct device *dev)
+{
+ /* Legacy initialization */
+ isa_dma_init();
+ pch_misc_init();
+
+ /* Enable CLKRUN_EN for power gating ESPI */
+ lpc_enable_pci_clk_cntl();
+
+ /* Set ESPI Serial IRQ mode */
+ if (CONFIG(SERIRQ_CONTINUOUS_MODE))
+ lpc_set_serirq_mode(SERIRQ_CONTINUOUS);
+ else
+ lpc_set_serirq_mode(SERIRQ_QUIET);
+
+ /* Interrupt configuration */
+ pch_enable_ioapic(dev);
+ soc_pch_pirq_init(dev);
+ setup_i8259();
+ i8259_configure_irq_trigger(9, 1);
+ soc_mirror_dmi_pcr_io_dec();
+}
+
+/* Fill up ESPI IO resource structure inside SoC directory */
+void pch_lpc_soc_fill_io_resources(struct device *dev)
+{
+ /*
+ * PMC pci device gets hidden from PCI bus due to Silicon
+ * policy hence bind ACPI BASE aka ABASE (offset 0x20) with
+ * ESPI IO resources to ensure that ABASE falls under PCI reserved
+ * IO memory range.
+ *
+ * Note: Don't add any more resource with same offset 0x20
+ * under this device space.
+ */
+ pch_lpc_add_new_resource(dev, PCI_BASE_ADDRESS_4,
+ ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, IORESOURCE_IO |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED);
+}
+
+#endif
diff --git a/src/soc/intel/tigerlake/finalize.c b/src/soc/intel/tigerlake/finalize.c
new file mode 100644
index 0000000..ac9dc24
--- /dev/null
+++ b/src/soc/intel/tigerlake/finalize.c
@@ -0,0 +1,126 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor PCH Datasheet
+ * Document number: 575857
+ * Chapter number: 4, 29
+ */
+
+#include <arch/io.h>
+#include <device/mmio.h>
+#include <bootstate.h>
+#include <console/console.h>
+#include <console/post_codes.h>
+#include <cpu/x86/smm.h>
+#include <device/pci.h>
+#include <intelblocks/lpc_lib.h>
+#include <intelblocks/pcr.h>
+#include <intelblocks/tco.h>
+#include <intelblocks/thermal.h>
+#include <reg_script.h>
+#include <spi-generic.h>
+#include <soc/p2sb.h>
+#include <soc/pci_devs.h>
+#include <soc/pcr_ids.h>
+#include <soc/pm.h>
+#include <soc/smbus.h>
+#include <soc/soc_chip.h>
+#include <soc/systemagent.h>
+#include <stdlib.h>
+
+#define CAMERA1_CLK 0x8000 /* Camera 1 Clock */
+#define CAMERA2_CLK 0x8080 /* Camera 2 Clock */
+#define CAM_CLK_EN (1 << 1)
+#define MIPI_CLK (1 << 0)
+#define HDPLL_CLK (0 << 0)
+
+static void pch_enable_isclk(void)
+{
+ pcr_or32(PID_ISCLK, CAMERA1_CLK, CAM_CLK_EN | MIPI_CLK);
+ pcr_or32(PID_ISCLK, CAMERA2_CLK, CAM_CLK_EN | MIPI_CLK);
+}
+
+static void pch_handle_sideband(config_t *config)
+{
+ if (config->pch_isclk)
+ pch_enable_isclk();
+}
+
+static void pch_finalize(void)
+{
+ uint32_t reg32;
+ uint8_t *pmcbase;
+ config_t *config;
+ uint8_t reg8;
+
+ /* TCO Lock down */
+ tco_lockdown();
+
+ /*
+ * Set low maximum temp threshold value used for dynamic thermal sensor
+ * shutdown consideration.
+ *
+ * If Dynamic Thermal Shutdown is enabled then PMC logic shuts down the
+ * thermal sensor when CPU is in a C-state and DTS Temp <= LTT.
+ */
+ pch_thermal_configuration();
+
+ /*
+ * Disable ACPI PM timer based on dt policy
+ *
+ * Disabling ACPI PM timer is necessary for XTAL OSC shutdown.
+ * Disabling ACPI PM timer also switches off TCO
+ *
+ * SA_DEV_ROOT device is used here instead of PCH_DEV_PMC since it is
+ * just required to get to chip config. PCH_DEV_PMC is hidden by this
+ * point and hence removed from the root bus. pcidev_path_on_root thus
+ * returns NULL for PCH_DEV_PMC device.
+ */
+ config = config_of_soc();
+ pmcbase = pmc_mmio_regs();
+ if (config->PmTimerDisabled) {
+ reg8 = read8(pmcbase + PCH_PWRM_ACPI_TMR_CTL);
+ reg8 |= (1 << 1);
+ write8(pmcbase + PCH_PWRM_ACPI_TMR_CTL, reg8);
+ }
+
+ /* Disable XTAL shutdown qualification for low power idle. */
+ if (config->s0ix_enable) {
+ reg32 = read32(pmcbase + CPPMVRIC);
+ reg32 |= XTALSDQDIS;
+ write32(pmcbase + CPPMVRIC, reg32);
+ }
+
+ pch_handle_sideband(config);
+
+ pmc_clear_pmcon_sts();
+}
+
+static void soc_finalize(void *unused)
+{
+ printk(BIOS_DEBUG, "Finalizing chipset.\n");
+
+ pch_finalize();
+
+ printk(BIOS_DEBUG, "Finalizing SMM.\n");
+ outb(APM_CNT_FINALIZE, APM_CNT);
+
+ /* Indicate finalize step with post code */
+ post_code(POST_OS_BOOT);
+}
+
+BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, soc_finalize, NULL);
+BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, soc_finalize, NULL);
diff --git a/src/soc/intel/tigerlake/fsp_params.c b/src/soc/intel/tigerlake/fsp_params.c
new file mode 100644
index 0000000..18985a6
--- /dev/null
+++ b/src/soc/intel/tigerlake/fsp_params.c
@@ -0,0 +1,46 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <fsp/api.h>
+#include <soc/ramstage.h>
+
+static const pci_devfn_t serial_io_dev[] = {
+ PCH_DEVFN_I2C0,
+ PCH_DEVFN_I2C1,
+ PCH_DEVFN_I2C2,
+ PCH_DEVFN_I2C3,
+ PCH_DEVFN_I2C4,
+ PCH_DEVFN_I2C5,
+ PCH_DEVFN_GSPI0,
+ PCH_DEVFN_GSPI1,
+ PCH_DEVFN_GSPI2,
+ PCH_DEVFN_UART0,
+ PCH_DEVFN_UART1,
+ PCH_DEVFN_UART2
+};
+
+/* UPD parameters to be initialized before SiliconInit */
+void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd)
+{
+ /* TODO: Update with UPD override as FSP matures */
+}
+
+/* Return list of SOC LPSS controllers */
+const pci_devfn_t *soc_lpss_controllers_list(size_t *size)
+{
+ *size = ARRAY_SIZE(serial_io_dev);
+ return serial_io_dev;
+}
diff --git a/src/soc/intel/tigerlake/gpio.c b/src/soc/intel/tigerlake/gpio.c
new file mode 100644
index 0000000..4a5880b
--- /dev/null
+++ b/src/soc/intel/tigerlake/gpio.c
@@ -0,0 +1,212 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor PCH Datasheet
+ * Document number: 575857
+ * Chapter number: 27
+ */
+
+#include <intelblocks/gpio.h>
+#include <intelblocks/pcr.h>
+#include <soc/pcr_ids.h>
+#include <soc/pmc.h>
+
+static const struct reset_mapping rst_map[] = {
+ { .logical = PAD_CFG0_LOGICAL_RESET_RSMRST, .chipset = 0U << 30 },
+ { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 },
+ { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 },
+};
+
+static const struct reset_mapping rst_map_com0[] = {
+ { .logical = PAD_CFG0_LOGICAL_RESET_PWROK, .chipset = 0U << 30 },
+ { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 },
+ { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 },
+ { .logical = PAD_CFG0_LOGICAL_RESET_RSMRST, .chipset = 3U << 30 },
+};
+
+/*
+ * The GPIO driver for Tigerlake on Windows/Linux expects 32 GPIOs per pad
+ * group, regardless of whether or not there is a physical pad for each
+ * exposed GPIO number.
+ *
+ * This results in the OS having a sparse GPIO map, and devices that need
+ * to export an ACPI GPIO must use the OS expected number.
+ *
+ * Not all pins are usable as GPIO and those groups do not have a pad base.
+ *
+ * This layout matches the Linux kernel pinctrl map for CNL-LP at:
+ * linux/drivers/pinctrl/intel/pinctrl-tigerlake.c
+ */
+static const struct pad_group tgl_community0_groups[] = {
+ INTEL_GPP_BASE(GPP_G0, GPP_G0, GPP_G7, 0), /* GPP_G */
+ INTEL_GPP_BASE(GPP_G0, GPP_B0, GPP_B23, 32), /* GPP_B */
+ INTEL_GPP(GPP_G0, GPIO_RSVD_0, GPIO_RSVD_1),
+ INTEL_GPP_BASE(GPP_G0, GPP_A0, GPP_A23, 64), /* GPP_A */
+};
+
+static const struct pad_group tgl_community1_groups[] = {
+ INTEL_GPP_BASE(GPP_H0, GPP_H0, GPP_H23, 96), /* GPP_H */
+ INTEL_GPP_BASE(GPP_H0, GPP_D0, GPIO_RSVD_2, 128), /* GPP_D */
+ INTEL_GPP_BASE(GPP_H0, GPP_F0, GPP_F19, 160), /* GPP_F */
+};
+
+/* This community is not visible to the OS */
+static const struct pad_group tgl_community2_groups[] = {
+ INTEL_GPP(GPD0, GPD0, GPD11), /* GPD */
+};
+
+
+static const struct pad_group tgl_community4_groups[] = {
+ INTEL_GPP_BASE(GPP_C0, GPP_C0, GPP_C23, 224), /* GPP_C */
+ INTEL_GPP_BASE(GPP_C0, GPP_E0, GPP_E23, 256), /* GPP_E */
+ INTEL_GPP(GPP_C0, GPIO_RSVD_3, GPIO_RSVD_8),
+};
+
+
+static const struct pad_group tgl_community5_groups[] = {
+ INTEL_GPP_BASE(GPP_R0, GPP_R0, GPP_R7, 288), /* GPP_R */
+ INTEL_GPP_BASE(GPP_C0, GPP_S0, GPP_S7, 320), /* GPP_S */
+};
+
+static const struct pad_community tgl_communities[TOTAL_GPIO_COMM] = {
+ /* GPP G, B, A */
+ [COMM_0] = {
+ .port = PID_GPIOCOM0,
+ .first_pad = GPP_G0,
+ .last_pad = GPP_A23,
+ .num_gpi_regs = NUM_GPIO_COM0_GPI_REGS,
+ .pad_cfg_base = PAD_CFG_BASE,
+ .host_own_reg_0 = HOSTSW_OWN_REG_0,
+ .gpi_int_sts_reg_0 = GPI_INT_STS_0,
+ .gpi_int_en_reg_0 = GPI_INT_EN_0,
+ .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+ .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+ .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+ .name = "GPP_GBA",
+ .acpi_path = "\\_SB.PCI0.GPIO",
+ .reset_map = rst_map_com0,
+ .num_reset_vals = ARRAY_SIZE(rst_map_com0),
+ .groups = tgl_community0_groups,
+ .num_groups = ARRAY_SIZE(tgl_community0_groups),
+ },
+ /* GPP H, D, F */
+ [COMM_1] = {
+ .port = PID_GPIOCOM1,
+ .first_pad = GPP_H0,
+ .last_pad = GPP_F19,
+ .num_gpi_regs = NUM_GPIO_COM1_GPI_REGS,
+ .pad_cfg_base = PAD_CFG_BASE,
+ .host_own_reg_0 = HOSTSW_OWN_REG_0,
+ .gpi_int_sts_reg_0 = GPI_INT_STS_0,
+ .gpi_int_en_reg_0 = GPI_INT_EN_0,
+ .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+ .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+ .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+ .name = "GPP_HDF",
+ .acpi_path = "\\_SB.PCI0.GPIO",
+ .reset_map = rst_map,
+ .num_reset_vals = ARRAY_SIZE(rst_map),
+ .groups = tgl_community1_groups,
+ .num_groups = ARRAY_SIZE(tgl_community1_groups),
+ },
+ /* GPD */
+ [COMM_2] = {
+ .port = PID_GPIOCOM2,
+ .first_pad = GPD0,
+ .last_pad = GPD11,
+ .num_gpi_regs = NUM_GPIO_COM2_GPI_REGS,
+ .pad_cfg_base = PAD_CFG_BASE,
+ .host_own_reg_0 = HOSTSW_OWN_REG_0,
+ .gpi_int_sts_reg_0 = GPI_INT_STS_0,
+ .gpi_int_en_reg_0 = GPI_INT_EN_0,
+ .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+ .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+ .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+ .name = "GPD",
+ .acpi_path = "\\_SB.PCI0.GPIO",
+ .reset_map = rst_map,
+ .num_reset_vals = ARRAY_SIZE(rst_map),
+ .groups = tgl_community2_groups,
+ .num_groups = ARRAY_SIZE(tgl_community2_groups),
+ },
+ /* GPP C, E */
+ [COMM_3] = {
+ .port = PID_GPIOCOM4,
+ .first_pad = GPP_C0,
+ .last_pad = GPP_E23,
+ .num_gpi_regs = NUM_GPIO_COM4_GPI_REGS,
+ .pad_cfg_base = PAD_CFG_BASE,
+ .host_own_reg_0 = HOSTSW_OWN_REG_0,
+ .gpi_int_sts_reg_0 = GPI_INT_STS_0,
+ .gpi_int_en_reg_0 = GPI_INT_EN_0,
+ .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+ .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+ .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+ .name = "GPP_CE",
+ .acpi_path = "\\_SB.PCI0.GPIO",
+ .reset_map = rst_map,
+ .num_reset_vals = ARRAY_SIZE(rst_map),
+ .groups = tgl_community4_groups,
+ .num_groups = ARRAY_SIZE(tgl_community4_groups),
+ },
+ /* GPP R, S */
+ [COMM_4] = {
+ .port = PID_GPIOCOM5,
+ .first_pad = GPP_R0,
+ .last_pad = GPP_S7,
+ .num_gpi_regs = NUM_GPIO_COM5_GPI_REGS,
+ .pad_cfg_base = PAD_CFG_BASE,
+ .host_own_reg_0 = HOSTSW_OWN_REG_0,
+ .gpi_int_sts_reg_0 = GPI_INT_STS_0,
+ .gpi_int_en_reg_0 = GPI_INT_EN_0,
+ .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
+ .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
+ .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
+ .name = "GPP_RS",
+ .acpi_path = "\\_SB.PCI0.GPIO",
+ .reset_map = rst_map,
+ .num_reset_vals = ARRAY_SIZE(rst_map),
+ .groups = tgl_community5_groups,
+ .num_groups = ARRAY_SIZE(tgl_community5_groups),
+ }
+};
+
+const struct pad_community *soc_gpio_get_community(size_t *num_communities)
+{
+ *num_communities = ARRAY_SIZE(tgl_communities);
+ return tgl_communities;
+}
+
+const struct pmc_to_gpio_route *soc_pmc_gpio_routes(size_t *num)
+{
+ static const struct pmc_to_gpio_route routes[] = {
+ { PMC_GPP_G, GPP_G },
+ { PMC_GPP_B, GPP_B },
+ { PMC_GPP_A, GPP_A },
+ { PMC_GPP_H, GPP_H },
+ { PMC_GPP_D, GPP_D },
+ { PMC_GPP_F, GPP_F },
+ { PMC_GPD, GPD },
+ { PMC_GPP_C, GPP_C },
+ { PMC_GPP_E, GPP_E },
+ { PMC_GPP_R, GPP_R },
+ { PMC_GPP_S, GPP_S }
+
+ };
+ *num = ARRAY_SIZE(routes);
+ return routes;
+}
diff --git a/src/soc/intel/tigerlake/graphics.c b/src/soc/intel/tigerlake/graphics.c
new file mode 100644
index 0000000..c215384
--- /dev/null
+++ b/src/soc/intel/tigerlake/graphics.c
@@ -0,0 +1,94 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor SA Datasheet
+ * Document number: 571131
+ * Chapter number: 4
+ */
+
+#include <arch/acpi.h>
+#include <console/console.h>
+#include <fsp/util.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <drivers/intel/gma/i915_reg.h>
+#include <drivers/intel/gma/opregion.h>
+#include <intelblocks/graphics.h>
+#include <types.h>
+
+uintptr_t fsp_soc_get_igd_bar(void)
+{
+ return graphics_get_memory_base();
+}
+
+void graphics_soc_init(struct device *dev)
+{
+ uint32_t ddi_buf_ctl;
+
+ /* Skip IGD GT programming */
+ if (CONFIG(SKIP_GRAPHICS_ENABLING))
+ return;
+
+ /*
+ * Enable DDI-A (eDP) 4-lane operation if the link is not up yet.
+ * This will allow the kernel to use 4-lane eDP links properly
+ * if the VBIOS or GOP driver do not execute.
+ */
+ ddi_buf_ctl = graphics_gtt_read(DDI_BUF_CTL_A);
+ if (!acpi_is_wakeup_s3() && !(ddi_buf_ctl & DDI_BUF_CTL_ENABLE)) {
+ ddi_buf_ctl |= (DDI_A_4_LANES | DDI_INIT_DISPLAY_DETECTED |
+ DDI_BUF_IS_IDLE);
+ graphics_gtt_write(DDI_BUF_CTL_A, ddi_buf_ctl);
+ }
+
+ /*
+ * GFX PEIM module inside FSP binary is taking care of graphics
+ * initialization based on RUN_FSP_GOP Kconfig
+ * option and input VBT file. Hence no need to load/execute legacy VGA
+ * OpROM in order to initialize GFX.
+ *
+ * In case of non-FSP solution, SoC need to select VGA_ROM_RUN
+ * Kconfig to perform GFX initialization through VGA OpRom.
+ */
+ if (CONFIG(RUN_FSP_GOP))
+ return;
+
+ /* IGD needs to Bus Master */
+ uint32_t reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ /* Initialize PCI device, load/execute BIOS Option ROM */
+ pci_dev_init(dev);
+}
+
+uintptr_t graphics_soc_write_acpi_opregion(struct device *device,
+ uintptr_t current, struct acpi_rsdp *rsdp)
+{
+ igd_opregion_t *opregion;
+
+ printk(BIOS_DEBUG, "ACPI: * IGD OpRegion\n");
+ opregion = (igd_opregion_t *)current;
+
+ if (intel_gma_init_igd_opregion(opregion) != CB_SUCCESS)
+ return current;
+
+ current += sizeof(igd_opregion_t);
+
+ return acpi_align_current(current);
+}
diff --git a/src/soc/intel/tigerlake/gspi.c b/src/soc/intel/tigerlake/gspi.c
new file mode 100644
index 0000000..2dc738e
--- /dev/null
+++ b/src/soc/intel/tigerlake/gspi.c
@@ -0,0 +1,37 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor PCH Datasheet
+ * Document number: 575857
+ * Chapter number: 11
+ */
+
+#include <intelblocks/gspi.h>
+#include <soc/pci_devs.h>
+
+int gspi_soc_bus_to_devfn(unsigned int gspi_bus)
+{
+ switch (gspi_bus) {
+ case 0:
+ return PCH_DEVFN_GSPI0;
+ case 1:
+ return PCH_DEVFN_GSPI1;
+ case 2:
+ return PCH_DEVFN_GSPI2;
+ }
+ return -1;
+}
diff --git a/src/soc/intel/tigerlake/i2c.c b/src/soc/intel/tigerlake/i2c.c
new file mode 100644
index 0000000..3d00372
--- /dev/null
+++ b/src/soc/intel/tigerlake/i2c.c
@@ -0,0 +1,62 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor PCH Datasheet
+ * Document number: 575857
+ * Chapter number: 13
+ */
+
+#include <device/device.h>
+#include <drivers/i2c/designware/dw_i2c.h>
+#include <soc/pci_devs.h>
+
+int dw_i2c_soc_devfn_to_bus(unsigned int devfn)
+{
+ switch (devfn) {
+ case PCH_DEVFN_I2C0:
+ return 0;
+ case PCH_DEVFN_I2C1:
+ return 1;
+ case PCH_DEVFN_I2C2:
+ return 2;
+ case PCH_DEVFN_I2C3:
+ return 3;
+ case PCH_DEVFN_I2C4:
+ return 4;
+ case PCH_DEVFN_I2C5:
+ return 5;
+ }
+ return -1;
+}
+
+int dw_i2c_soc_bus_to_devfn(unsigned int bus)
+{
+ switch (bus) {
+ case 0:
+ return PCH_DEVFN_I2C0;
+ case 1:
+ return PCH_DEVFN_I2C1;
+ case 2:
+ return PCH_DEVFN_I2C2;
+ case 3:
+ return PCH_DEVFN_I2C3;
+ case 4:
+ return PCH_DEVFN_I2C4;
+ case 5:
+ return PCH_DEVFN_I2C5;
+ }
+ return -1;
+}
diff --git a/src/soc/intel/tigerlake/include/soc/cpu.h b/src/soc/intel/tigerlake/include/soc/cpu.h
new file mode 100644
index 0000000..210e699
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/cpu.h
@@ -0,0 +1,49 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_TIGERLAKE_CPU_H_
+#define _SOC_TIGERLAKE_CPU_H_
+
+#include <intelblocks/msr.h>
+
+/* Latency times in units of 32768ns */
+#define C_STATE_LATENCY_CONTROL_0_LIMIT 0x9d
+#define C_STATE_LATENCY_CONTROL_1_LIMIT 0x9d
+#define C_STATE_LATENCY_CONTROL_2_LIMIT 0x9d
+#define C_STATE_LATENCY_CONTROL_3_LIMIT 0x9d
+#define C_STATE_LATENCY_CONTROL_4_LIMIT 0x9d
+#define C_STATE_LATENCY_CONTROL_5_LIMIT 0x9d
+
+/* Power in units of mW */
+#define C1_POWER 0x3e8
+#define C6_POWER 0x15e
+#define C7_POWER 0xc8
+#define C8_POWER 0xc8
+#define C9_POWER 0xc8
+#define C10_POWER 0xc8
+
+/* Common Timer Copy (CTC) frequency - 38.4MHz. */
+#define CTC_FREQ 38400000
+
+#define C_STATE_LATENCY_MICRO_SECONDS(limit, base) \
+ (((1 << ((base)*5)) * (limit)) / 1000)
+#define C_STATE_LATENCY_FROM_LAT_REG(reg) \
+ C_STATE_LATENCY_MICRO_SECONDS(C_STATE_LATENCY_CONTROL_ ##reg## _LIMIT, \
+ (IRTL_1024_NS >> 10))
+
+/* Configure power limits for turbo mode */
+void set_power_limits(u8 power_limit_1_time);
+
+#endif
diff --git a/src/soc/intel/tigerlake/include/soc/gpe.h b/src/soc/intel/tigerlake/include/soc/gpe.h
new file mode 100644
index 0000000..d946e2a
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/gpe.h
@@ -0,0 +1,134 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_GPE_H_
+#define _SOC_GPE_H_
+
+/* GPE_31_0 */
+#define GPE0_DW0_00 0
+#define GPE0_DW0_01 1
+#define GPE0_DW0_02 2
+#define GPE0_DW0_03 3
+#define GPE0_DW0_04 4
+#define GPE0_DW0_05 5
+#define GPE0_DW0_06 6
+#define GPE0_DW0_07 7
+#define GPE0_DW0_08 8
+#define GPE0_DW0_09 9
+#define GPE0_DW0_10 10
+#define GPE0_DW0_11 11
+#define GPE0_DW0_12 12
+#define GPE0_DW0_13 13
+#define GPE0_DW0_14 14
+#define GPE0_DW0_15 15
+#define GPE0_DW0_16 16
+#define GPE0_DW0_17 17
+#define GPE0_DW0_18 18
+#define GPE0_DW0_19 19
+#define GPE0_DW0_20 20
+#define GPE0_DW0_21 21
+#define GPE0_DW0_22 22
+#define GPE0_DW0_23 23
+#define GPE0_DW0_24 24
+#define GPE0_DW0_25 25
+#define GPE0_DW0_26 26
+#define GPE0_DW0_27 27
+#define GPE0_DW0_28 28
+#define GPE0_DW0_29 29
+#define GPE0_DW0_30 30
+#define GPE0_DW0_31 31
+/* GPE_63_32 */
+#define GPE0_DW1_00 32
+#define GPE0_DW1_01 33
+#define GPE0_DW1_02 34
+#define GPE0_DW1_03 36
+#define GPE0_DW1_04 36
+#define GPE0_DW1_05 37
+#define GPE0_DW1_06 38
+#define GPE0_DW1_07 39
+#define GPE0_DW1_08 40
+#define GPE0_DW1_09 41
+#define GPE0_DW1_10 42
+#define GPE0_DW1_11 43
+#define GPE0_DW1_12 44
+#define GPE0_DW1_13 45
+#define GPE0_DW1_14 46
+#define GPE0_DW1_15 47
+#define GPE0_DW1_16 48
+#define GPE0_DW1_17 49
+#define GPE0_DW1_18 50
+#define GPE0_DW1_19 51
+#define GPE0_DW1_20 52
+#define GPE0_DW1_21 53
+#define GPE0_DW1_22 54
+#define GPE0_DW1_23 55
+#define GPE0_DW1_24 56
+#define GPE0_DW1_25 57
+#define GPE0_DW1_26 58
+#define GPE0_DW1_27 59
+#define GPE0_DW1_28 60
+#define GPE0_DW1_29 61
+#define GPE0_DW1_30 62
+#define GPE0_DW1_31 63
+/* GPE_95_64 */
+#define GPE0_DW2_00 64
+#define GPE0_DW2_01 65
+#define GPE0_DW2_02 66
+#define GPE0_DW2_03 67
+#define GPE0_DW2_04 68
+#define GPE0_DW2_05 69
+#define GPE0_DW2_06 70
+#define GPE0_DW2_07 71
+#define GPE0_DW2_08 72
+#define GPE0_DW2_09 73
+#define GPE0_DW2_10 74
+#define GPE0_DW2_11 75
+#define GPE0_DW2_12 76
+#define GPE0_DW2_13 77
+#define GPE0_DW2_14 78
+#define GPE0_DW2_15 79
+#define GPE0_DW2_16 80
+#define GPE0_DW2_17 81
+#define GPE0_DW2_18 82
+#define GPE0_DW2_19 83
+#define GPE0_DW2_20 84
+#define GPE0_DW2_21 85
+#define GPE0_DW2_22 86
+#define GPE0_DW2_23 87
+#define GPE0_DW2_24 88
+#define GPE0_DW2_25 89
+#define GPE0_DW2_26 90
+#define GPE0_DW2_27 91
+#define GPE0_DW2_28 92
+#define GPE0_DW2_29 93
+#define GPE0_DW2_30 94
+#define GPE0_DW2_31 95
+/* GPE_STD */
+#define GPE0_HOT_PLUG 97
+#define GPE0_SWGPE 98
+#define GPE0_TCOSCI 102
+#define GPE0_SMB_WAK 103
+#define GPE0_PCI_EXP 105
+#define GPE0_BATLOW 106
+#define GPE0_PME 107
+#define GPE0_ME_SCI 108
+#define GPE0_PME_B0 109
+#define GPE0_ESPI 110
+#define GPE0_GPIO_T2 111
+#define GPE0_LAN_WAK 112
+#define GPE0_WADT 114
+
+#define GPE_MAX GPE0_WADT
+#endif /* _SOC_GPE_H_ */
diff --git a/src/soc/intel/tigerlake/include/soc/gpio.h b/src/soc/intel/tigerlake/include/soc/gpio.h
new file mode 100644
index 0000000..4b359b7
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/gpio.h
@@ -0,0 +1,24 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_TIGERLAKE_GPIO_H_
+#define _SOC_TIGERLAKE_GPIO_H_
+
+#include <soc/gpio_defs.h>
+#include <intelblocks/gpio.h>
+
+#define CROS_GPIO_DEVICE_NAME "INT3455:00"
+
+#endif
diff --git a/src/soc/intel/tigerlake/include/soc/gpio_defs.h b/src/soc/intel/tigerlake/include/soc/gpio_defs.h
new file mode 100644
index 0000000..bffebcd
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/gpio_defs.h
@@ -0,0 +1,276 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_TIGERLAKE_GPIO_DEFS_H_
+#define _SOC_TIGERLAKE_GPIO_DEFS_H_
+
+#ifndef __ACPI__
+#include <stddef.h>
+#endif
+#include <soc/gpio_soc_defs.h>
+
+
+#define GPIO_NUM_PAD_CFG_REGS 4 /* DW0, DW1, DW2, DW3 */
+
+#define NUM_GPIO_COMx_GPI_REGS(n) \
+ (ALIGN_UP((n), GPIO_MAX_NUM_PER_GROUP) / GPIO_MAX_NUM_PER_GROUP)
+
+#define NUM_GPIO_COM0_GPI_REGS NUM_GPIO_COMx_GPI_REGS(NUM_GPIO_COM0_PADS)
+#define NUM_GPIO_COM1_GPI_REGS NUM_GPIO_COMx_GPI_REGS(NUM_GPIO_COM1_PADS)
+#define NUM_GPIO_COM2_GPI_REGS NUM_GPIO_COMx_GPI_REGS(NUM_GPIO_COM2_PADS)
+#define NUM_GPIO_COM4_GPI_REGS NUM_GPIO_COMx_GPI_REGS(NUM_GPIO_COM4_PADS)
+#define NUM_GPIO_COM5_GPI_REGS NUM_GPIO_COMx_GPI_REGS(NUM_GPIO_COM5_PADS)
+
+#define NUM_GPI_STATUS_REGS \
+ ((NUM_GPIO_COM0_GPI_REGS) +\
+ (NUM_GPIO_COM1_GPI_REGS) +\
+ (NUM_GPIO_COM2_GPI_REGS) +\
+ (NUM_GPIO_COM4_GPI_REGS) +\
+ (NUM_GPIO_COM5_GPI_REGS))
+/*
+ * IOxAPIC IRQs for the GPIOs
+ */
+
+/* Group G */
+#define GPP_G0_IRQ 0x18
+#define GPP_G1_IRQ 0x19
+#define GPP_G2_IRQ 0x1a
+#define GPP_G3_IRQ 0x1b
+#define GPP_G4_IRQ 0x1c
+#define GPP_G5_IRQ 0x1d
+#define GPP_G6_IRQ 0x1e
+#define GPP_G7_IRQ 0x1f
+
+/* Group B */
+#define GPP_B0_IRQ 0x20
+#define GPP_B1_IRQ 0x21
+#define GPP_B2_IRQ 0x22
+#define GPP_B3_IRQ 0x23
+#define GPP_B4_IRQ 0x24
+#define GPP_B5_IRQ 0x25
+#define GPP_B6_IRQ 0x26
+#define GPP_B7_IRQ 0x27
+#define GPP_B8_IRQ 0x28
+#define GPP_B9_IRQ 0x29
+#define GPP_B10_IRQ 0x2a
+#define GPP_B11_IRQ 0x2b
+#define GPP_B12_IRQ 0x2c
+#define GPP_B13_IRQ 0x2d
+#define GPP_B14_IRQ 0x2e
+#define GPP_B15_IRQ 0x2f
+#define GPP_B16_IRQ 0x30
+#define GPP_B17_IRQ 0x31
+#define GPP_B18_IRQ 0x32
+#define GPP_B19_IRQ 0x33
+#define GPP_B20_IRQ 0x34
+#define GPP_B21_IRQ 0x35
+#define GPP_B22_IRQ 0x36
+#define GPP_B23_IRQ 0x37
+
+/* Group A */
+#define GPP_A0_IRQ 0x38
+#define GPP_A1_IRQ 0x39
+#define GPP_A2_IRQ 0x3a
+#define GPP_A3_IRQ 0x3b
+#define GPP_A4_IRQ 0x3c
+#define GPP_A5_IRQ 0x3d
+#define GPP_A6_IRQ 0x3e
+#define GPP_A7_IRQ 0x3f
+#define GPP_A8_IRQ 0x40
+#define GPP_A9_IRQ 0x41
+#define GPP_A10_IRQ 0x42
+#define GPP_A11_IRQ 0x43
+#define GPP_A12_IRQ 0x44
+#define GPP_A13_IRQ 0x45
+#define GPP_A14_IRQ 0x46
+#define GPP_A15_IRQ 0x47
+#define GPP_A16_IRQ 0x48
+#define GPP_A17_IRQ 0x49
+#define GPP_A18_IRQ 0x4a
+#define GPP_A19_IRQ 0x4b
+#define GPP_A20_IRQ 0x4c
+#define GPP_A21_IRQ 0x4d
+#define GPP_A22_IRQ 0x4e
+#define GPP_A23_IRQ 0x4f
+
+/* Group H */
+#define GPP_H0_IRQ 0x70
+#define GPP_H1_IRQ 0x71
+#define GPP_H2_IRQ 0x72
+#define GPP_H3_IRQ 0x73
+#define GPP_H4_IRQ 0x74
+#define GPP_H5_IRQ 0x75
+#define GPP_H6_IRQ 0x76
+#define GPP_H7_IRQ 0x77
+#define GPP_H8_IRQ 0x18
+#define GPP_H9_IRQ 0x19
+#define GPP_H10_IRQ 0x1a
+#define GPP_H11_IRQ 0x1b
+#define GPP_H12_IRQ 0x1c
+#define GPP_H13_IRQ 0x1d
+#define GPP_H14_IRQ 0x1e
+#define GPP_H15_IRQ 0x1f
+#define GPP_H16_IRQ 0x20
+#define GPP_H17_IRQ 0x21
+#define GPP_H18_IRQ 0x22
+#define GPP_H19_IRQ 0x23
+#define GPP_H20_IRQ 0x24
+#define GPP_H21_IRQ 0x25
+#define GPP_H22_IRQ 0x26
+#define GPP_H23_IRQ 0x27
+
+/* Group D */
+#define GPP_D0_IRQ 0x28
+#define GPP_D1_IRQ 0x29
+#define GPP_D2_IRQ 0x2a
+#define GPP_D3_IRQ 0x2b
+#define GPP_D4_IRQ 0x2c
+#define GPP_D5_IRQ 0x2d
+#define GPP_D6_IRQ 0x2e
+#define GPP_D7_IRQ 0x2f
+#define GPP_D8_IRQ 0x30
+#define GPP_D9_IRQ 0x31
+#define GPP_D10_IRQ 0x32
+#define GPP_D11_IRQ 0x33
+#define GPP_D12_IRQ 0x34
+#define GPP_D13_IRQ 0x35
+#define GPP_D14_IRQ 0x36
+#define GPP_D15_IRQ 0x37
+#define GPP_D16_IRQ 0x38
+#define GPP_D17_IRQ 0x39
+#define GPP_D18_IRQ 0x3a
+#define GPP_D19_IRQ 0x3b
+
+/* Group F */
+#define GPP_F0_IRQ 0x40
+#define GPP_F1_IRQ 0x41
+#define GPP_F2_IRQ 0x42
+#define GPP_F3_IRQ 0x43
+#define GPP_F4_IRQ 0x44
+#define GPP_F5_IRQ 0x45
+#define GPP_F6_IRQ 0x46
+#define GPP_F7_IRQ 0x47
+#define GPP_F8_IRQ 0x48
+#define GPP_F9_IRQ 0x49
+#define GPP_F10_IRQ 0x4a
+#define GPP_F11_IRQ 0x4b
+#define GPP_F12_IRQ 0x4c
+#define GPP_F13_IRQ 0x4d
+#define GPP_F14_IRQ 0x4e
+#define GPP_F15_IRQ 0x4f
+#define GPP_F16_IRQ 0x50
+#define GPP_F17_IRQ 0x51
+#define GPP_F18_IRQ 0x52
+#define GPP_F19_IRQ 0x53
+
+/* Group GPD */
+#define GPD0_IRQ 0x64
+#define GPD1_IRQ 0x65
+#define GPD2_IRQ 0x66
+#define GPD3_IRQ 0x67
+#define GPD4_IRQ 0x68
+#define GPD5_IRQ 0x69
+#define GPD6_IRQ 0x6a
+#define GPD7_IRQ 0x6b
+#define GPD8_IRQ 0x6c
+#define GPD9_IRQ 0x6d
+#define GPD10_IRQ 0x6e
+#define GPD11_IRQ 0x6f
+
+/* Group C */
+#define GPP_C0_IRQ 0x5a
+#define GPP_C1_IRQ 0x5b
+#define GPP_C2_IRQ 0x5c
+#define GPP_C3_IRQ 0x5d
+#define GPP_C4_IRQ 0x5e
+#define GPP_C5_IRQ 0x5f
+#define GPP_C6_IRQ 0x60
+#define GPP_C7_IRQ 0x61
+#define GPP_C8_IRQ 0x62
+#define GPP_C9_IRQ 0x63
+#define GPP_C10_IRQ 0x64
+#define GPP_C11_IRQ 0x65
+#define GPP_C12_IRQ 0x66
+#define GPP_C13_IRQ 0x67
+#define GPP_C14_IRQ 0x68
+#define GPP_C15_IRQ 0x69
+#define GPP_C16_IRQ 0x6a
+#define GPP_C17_IRQ 0x6b
+#define GPP_C18_IRQ 0x6c
+#define GPP_C19_IRQ 0x6d
+#define GPP_C20_IRQ 0x6e
+#define GPP_C21_IRQ 0x6f
+#define GPP_C22_IRQ 0x70
+#define GPP_C23_IRQ 0x71
+/* Group E */
+#define GPP_E0_IRQ 0x72
+#define GPP_E1_IRQ 0x73
+#define GPP_E2_IRQ 0x74
+#define GPP_E3_IRQ 0x75
+#define GPP_E4_IRQ 0x76
+#define GPP_E5_IRQ 0x77
+#define GPP_E6_IRQ 0x18
+#define GPP_E7_IRQ 0x19
+#define GPP_E8_IRQ 0x1a
+#define GPP_E9_IRQ 0x1b
+#define GPP_E10_IRQ 0x1c
+#define GPP_E11_IRQ 0x1d
+#define GPP_E12_IRQ 0x1e
+#define GPP_E13_IRQ 0x1f
+#define GPP_E14_IRQ 0x20
+#define GPP_E15_IRQ 0x21
+#define GPP_E16_IRQ 0x22
+#define GPP_E17_IRQ 0x23
+#define GPP_E18_IRQ 0x24
+#define GPP_E19_IRQ 0x25
+#define GPP_E20_IRQ 0x26
+#define GPP_E21_IRQ 0x27
+#define GPP_E22_IRQ 0x28
+#define GPP_E23_IRQ 0x29
+
+/* Group R*/
+#define GPP_R0_IRQ 0x50
+#define GPP_R1_IRQ 0x51
+#define GPP_R2_IRQ 0x52
+#define GPP_R3_IRQ 0x53
+#define GPP_R4_IRQ 0x54
+#define GPP_R5_IRQ 0x55
+#define GPP_R6_IRQ 0x56
+#define GPP_R7_IRQ 0x57
+
+/* Group S */
+#define GPP_S0_IRQ 0x5c
+#define GPP_S1_IRQ 0x5d
+#define GPP_S2_IRQ 0x5e
+#define GPP_S3_IRQ 0x5f
+#define GPP_S4_IRQ 0x60
+#define GPP_S5_IRQ 0x61
+#define GPP_S6_IRQ 0x62
+#define GPP_S7_IRQ 0x63
+
+/* Register defines. */
+#define GPIO_MISCCFG 0x10
+#define GPE_DW_SHIFT 8
+#define GPE_DW_MASK 0xfff00
+#define HOSTSW_OWN_REG_0 0xb0
+#define GPI_INT_STS_0 0x100
+#define GPI_INT_EN_0 0x110
+#define GPI_SMI_STS_0 0x180
+#define GPI_SMI_EN_0 0x1A0
+#define PAD_CFG_BASE 0x600
+
+#define GPIORXSTATE_MASK 0x1
+#define GPIORXSTATE_SHIFT 1
+#endif
diff --git a/src/soc/intel/tigerlake/include/soc/gpio_soc_defs.h b/src/soc/intel/tigerlake/include/soc/gpio_soc_defs.h
new file mode 100644
index 0000000..f0f2b11
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/gpio_soc_defs.h
@@ -0,0 +1,292 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_TIGERLAKE_GPIO_SOC_DEFS_H_
+#define _SOC_TIGERLAKE_GPIO_SOC_DEFS_H_
+
+/*
+ * Most of the fixed numbers and macros are based on the GPP groups.
+ * The GPIO groups are accessed through register blocks called
+ * communities.
+ */
+#define GPP_G 0x0
+#define GPP_B 0x1
+#define GPP_A 0x2
+#define GPP_R 0x3
+#define GPP_S 0x4
+#define GPD 0x5
+#define GPP_H 0x6
+#define GPP_D 0x7
+#define GPP_F 0x8
+#define GPP_VGPIO 0x9
+#define GPP_C 0xA
+#define GPP_E 0xB
+
+#define GPIO_NUM_GROUPS 11
+#define GPIO_MAX_NUM_PER_GROUP 24
+
+/*
+ * GPIOs are ordered monotonically increasing to match ACPI/OS driver.
+ */
+
+/* Group G */
+#define GPP_G0 0
+#define GPP_G1 1
+#define GPP_G2 2
+#define GPP_G3 3
+#define GPP_G4 4
+#define GPP_G5 5
+#define GPP_G6 6
+#define GPP_G7 7
+
+/* Group B */
+#define GPP_B0 8
+#define GPP_B1 9
+#define GPP_B2 10
+#define GPP_B3 11
+#define GPP_B4 12
+#define GPP_B5 13
+#define GPP_B6 14
+#define GPP_B7 15
+#define GPP_B8 16
+#define GPP_B9 17
+#define GPP_B10 18
+#define GPP_B11 19
+#define GPP_B12 20
+#define GPP_B13 21
+#define GPP_B14 22
+#define GPP_B15 23
+#define GPP_B16 24
+#define GPP_B17 25
+#define GPP_B18 26
+#define GPP_B19 27
+#define GPP_B20 28
+#define GPP_B21 29
+#define GPP_B22 30
+#define GPP_B23 31
+#define GPIO_RSVD_0 32
+#define GPIO_RSVD_1 33
+
+/* Group A */
+#define GPP_A0 34
+#define GPP_A1 35
+#define GPP_A2 36
+#define GPP_A3 37
+#define GPP_A4 38
+#define GPP_A5 39
+#define GPP_A6 40
+#define GPP_A7 41
+#define GPP_A8 42
+#define GPP_A9 43
+#define GPP_A10 44
+#define GPP_A11 45
+#define GPP_A12 46
+#define GPP_A13 47
+#define GPP_A14 48
+#define GPP_A15 49
+#define GPP_A16 50
+#define GPP_A17 51
+#define GPP_A18 52
+#define GPP_A19 53
+#define GPP_A20 54
+#define GPP_A21 55
+#define GPP_A22 56
+#define GPP_A23 57
+
+#define NUM_GPIO_COM0_PADS (GPP_A23 - GPP_G0 + 1)
+
+/* Group H */
+#define GPP_H0 58
+#define GPP_H1 59
+#define GPP_H2 60
+#define GPP_H3 61
+#define GPP_H4 62
+#define GPP_H5 63
+#define GPP_H6 64
+#define GPP_H7 65
+#define GPP_H8 66
+#define GPP_H9 67
+#define GPP_H10 68
+#define GPP_H11 69
+#define GPP_H12 70
+#define GPP_H13 71
+#define GPP_H14 72
+#define GPP_H15 73
+#define GPP_H16 74
+#define GPP_H17 75
+#define GPP_H18 76
+#define GPP_H19 77
+#define GPP_H20 78
+#define GPP_H21 79
+#define GPP_H22 80
+#define GPP_H23 81
+
+/* Group D */
+#define GPP_D0 82
+#define GPP_D1 83
+#define GPP_D2 84
+#define GPP_D3 85
+#define GPP_D4 86
+#define GPP_D5 87
+#define GPP_D6 88
+#define GPP_D7 89
+#define GPP_D8 90
+#define GPP_D9 91
+#define GPP_D10 92
+#define GPP_D11 93
+#define GPP_D12 94
+#define GPP_D13 95
+#define GPP_D14 96
+#define GPP_D15 97
+#define GPP_D16 98
+#define GPP_D17 99
+#define GPP_D18 100
+#define GPP_D19 101
+#define GPIO_RSVD_2 102
+
+/* Group F */
+#define GPP_F0 103
+#define GPP_F1 104
+#define GPP_F2 105
+#define GPP_F3 106
+#define GPP_F4 107
+#define GPP_F5 108
+#define GPP_F6 109
+#define GPP_F7 110
+#define GPP_F8 111
+#define GPP_F9 112
+#define GPP_F10 113
+#define GPP_F11 114
+#define GPP_F12 115
+#define GPP_F13 116
+#define GPP_F14 117
+#define GPP_F15 118
+#define GPP_F16 119
+#define GPP_F17 120
+#define GPP_F18 121
+#define GPP_F19 122
+
+#define NUM_GPIO_COM1_PADS (GPP_F19 - GPP_H0 + 1)
+
+
+/* Group GPD */
+#define GPD0 123
+#define GPD1 124
+#define GPD2 125
+#define GPD3 126
+#define GPD4 127
+#define GPD5 128
+#define GPD6 129
+#define GPD7 130
+#define GPD8 131
+#define GPD9 132
+#define GPD10 133
+#define GPD11 134
+
+#define NUM_GPIO_COM2_PADS (GPD11 - GPD0 + 1)
+
+
+/* Group C */
+#define GPP_C0 135
+#define GPP_C1 136
+#define GPP_C2 137
+#define GPP_C3 138
+#define GPP_C4 139
+#define GPP_C5 140
+#define GPP_C6 141
+#define GPP_C7 142
+#define GPP_C8 143
+#define GPP_C9 144
+#define GPP_C10 145
+#define GPP_C11 146
+#define GPP_C12 147
+#define GPP_C13 148
+#define GPP_C14 149
+#define GPP_C15 150
+#define GPP_C16 151
+#define GPP_C17 152
+#define GPP_C18 153
+#define GPP_C19 154
+#define GPP_C20 155
+#define GPP_C21 156
+#define GPP_C22 157
+#define GPP_C23 158
+#define GPIO_RSVD_3 159
+#define GPIO_RSVD_4 160
+#define GPIO_RSVD_5 161
+#define GPIO_RSVD_6 162
+#define GPIO_RSVD_7 163
+#define GPIO_RSVD_8 164
+
+/* Group E */
+#define GPP_E0 165
+#define GPP_E1 166
+#define GPP_E2 167
+#define GPP_E3 168
+#define GPP_E4 169
+#define GPP_E5 170
+#define GPP_E6 171
+#define GPP_E7 172
+#define GPP_E8 173
+#define GPP_E9 174
+#define GPP_E10 175
+#define GPP_E11 176
+#define GPP_E12 177
+#define GPP_E13 178
+#define GPP_E14 179
+#define GPP_E15 180
+#define GPP_E16 181
+#define GPP_E17 182
+#define GPP_E18 183
+#define GPP_E19 184
+#define GPP_E20 185
+#define GPP_E21 186
+#define GPP_E22 187
+#define GPP_E23 188
+
+#define NUM_GPIO_COM4_PADS (GPP_E23 - GPP_C0 + 1)
+
+/* Group R*/
+#define GPP_R0 189
+#define GPP_R1 190
+#define GPP_R2 191
+#define GPP_R3 192
+#define GPP_R4 193
+#define GPP_R5 194
+#define GPP_R6 195
+#define GPP_R7 196
+
+/* Group S */
+#define GPP_S0 197
+#define GPP_S1 198
+#define GPP_S2 199
+#define GPP_S3 200
+#define GPP_S4 201
+#define GPP_S5 202
+#define GPP_S6 203
+#define GPP_S7 204
+
+#define NUM_GPIO_COM5_PADS (GPP_S7 - GPP_R0 + 1)
+
+#define TOTAL_PADS 205
+
+#define COMM_0 0
+#define COMM_1 1
+#define COMM_2 2
+#define COMM_3 3
+#define COMM_4 4
+#define TOTAL_GPIO_COMM 5
+
+#endif
diff --git a/src/soc/intel/tigerlake/include/soc/irq.h b/src/soc/intel/tigerlake/include/soc/irq.h
new file mode 100644
index 0000000..2f980ff
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/irq.h
@@ -0,0 +1,106 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_IRQ_H_
+#define _SOC_IRQ_H_
+
+#define GPIO_IRQ14 14
+#define GPIO_IRQ15 15
+
+#define PCH_IRQ10 10
+#define PCH_IRQ11 11
+
+#define SCI_IRQ9 9
+#define SCI_IRQ10 10
+#define SCI_IRQ11 11
+#define SCI_IRQ20 20
+#define SCI_IRQ21 21
+#define SCI_IRQ22 22
+#define SCI_IRQ23 23
+
+#define TCO_IRQ9 9
+#define TCO_IRQ10 10
+#define TCO_IRQ11 11
+#define TCO_IRQ20 20
+#define TCO_IRQ21 21
+#define TCO_IRQ22 22
+#define TCO_IRQ23 23
+
+#define LPSS_I2C0_IRQ 16
+#define LPSS_I2C1_IRQ 17
+#define LPSS_I2C2_IRQ 18
+#define LPSS_I2C3_IRQ 19
+#define LPSS_I2C4_IRQ 32
+#define LPSS_I2C5_IRQ 33
+#define LPSS_SPI0_IRQ 22
+#define LPSS_SPI1_IRQ 23
+#define LPSS_SPI2_IRQ 24
+#define LPSS_UART0_IRQ 20
+#define LPSS_UART1_IRQ 21
+#define LPSS_UART2_IRQ 34
+#define SDIO_IRQ 22
+
+#define cAVS_INTA_IRQ 16
+#define SMBUS_INTA_IRQ 16
+#define SMBUS_INTB_IRQ 17
+#define GbE_INTA_IRQ 16
+#define GbE_INTC_IRQ 18
+#define TRACE_HUB_INTA_IRQ 16
+#define TRACE_HUB_INTD_IRQ 19
+
+#define eMMC_IRQ 16
+#define SD_IRQ 19
+
+#define PCIE_1_IRQ 16
+#define PCIE_2_IRQ 17
+#define PCIE_3_IRQ 18
+#define PCIE_4_IRQ 19
+#define PCIE_5_IRQ 16
+#define PCIE_6_IRQ 17
+#define PCIE_7_IRQ 18
+#define PCIE_8_IRQ 19
+#define PCIE_9_IRQ 16
+#define PCIE_10_IRQ 17
+#define PCIE_11_IRQ 18
+#define PCIE_12_IRQ 19
+
+#define SATA_IRQ 16
+
+#define HECI_1_IRQ 16
+#define HECI_2_IRQ 17
+#define IDER_IRQ 18
+#define KT_IRQ 19
+#define HECI_3_IRQ 16
+
+#define XHCI_IRQ 16
+#define OTG_IRQ 17
+#define PMC_SRAM_IRQ 18
+#define THERMAL_IRQ 16
+#define CNViWIFI_IRQ 19
+#define UFS_IRQ 16
+#define CIO_INTA_IRQ 16
+#define CIO_INTD_IRQ 19
+#define ISH_IRQ 20
+
+#define PEG_RP_INTA_IRQ 16
+#define PEG_RP_INTB_IRQ 17
+#define PEG_RP_INTC_IRQ 18
+#define PEG_RP_INTD_IRQ 19
+
+#define IGFX_IRQ 16
+#define SA_THERMAL_IRQ 16
+#define IPU_IRQ 16
+#define GNA_IRQ 16
+#endif /* _SOC_IRQ_H_ */
diff --git a/src/soc/intel/tigerlake/include/soc/itss.h b/src/soc/intel/tigerlake/include/soc/itss.h
new file mode 100644
index 0000000..6631ccc
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/itss.h
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef SOC_INTEL_TGL_ITSS_H
+#define SOC_INTEL_TGL_ITSS_H
+
+#define GPIO_IRQ_START 50
+#define GPIO_IRQ_END ITSS_MAX_IRQ
+
+#define ITSS_MAX_IRQ 119
+#define IRQS_PER_IPC 32
+#define NUM_IPC_REGS ((ITSS_MAX_IRQ + IRQS_PER_IPC - 1)/IRQS_PER_IPC)
+
+#endif /* SOC_INTEL_TGL_ITSS_H */
diff --git a/src/soc/intel/tigerlake/include/soc/msr.h b/src/soc/intel/tigerlake/include/soc/msr.h
new file mode 100644
index 0000000..2aa79af
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/msr.h
@@ -0,0 +1,24 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_MSR_H_
+#define _SOC_MSR_H_
+
+#include <intelblocks/msr.h>
+
+#define MSR_PIC_MSG_CONTROL 0x2e
+#define MSR_VR_MISC_CONFIG2 0x636
+
+#endif
diff --git a/src/soc/intel/tigerlake/include/soc/nvs.h b/src/soc/intel/tigerlake/include/soc/nvs.h
new file mode 100644
index 0000000..c855df0
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/nvs.h
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_NVS_H_
+#define _SOC_NVS_H_
+
+#include <intelblocks/nvs.h>
+
+#endif
diff --git a/src/soc/intel/tigerlake/include/soc/pmc.h b/src/soc/intel/tigerlake/include/soc/pmc.h
new file mode 100644
index 0000000..bae04ab
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/pmc.h
@@ -0,0 +1,151 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_TIGERLAKE_PMC_H_
+#define _SOC_TIGERLAKE_PMC_H_
+
+/* PCI Configuration Space (D31:F2): PMC */
+#define PWRMBASE 0x10
+#define ABASE 0x20
+
+/* Memory mapped IO registers in PMC */
+#define GEN_PMCON_A 0x1020
+#define DC_PP_DIS (1 << 30)
+#define DSX_PP_DIS (1 << 29)
+#define AG3_PP_EN (1 << 28)
+#define SX_PP_EN (1 << 27)
+#define ALLOW_ICLK_PLL_SD_INC0 (1 << 26)
+#define GBL_RST_STS (1 << 24)
+#define DISB (1 << 23)
+#define ALLOW_OPI_PLL_SD_INC0 (1 << 22)
+#define MEM_SR (1 << 21)
+#define ALLOW_SPXB_CG_INC0 (1 << 20)
+#define ALLOW_L1LOW_C0 (1 << 19)
+#define MS4V (1 << 18)
+#define ALLOW_L1LOW_OPI_ON (1 << 17)
+#define SUS_PWR_FLR (1 << 16)
+#define PME_B0_S5_DIS (1 << 15)
+#define PWR_FLR (1 << 14)
+#define ALLOW_L1LOW_BCLKREQ_ON (1 << 13)
+#define DIS_SLP_X_STRCH_SUS_UP (1 << 12)
+#define SLP_S3_MIN_ASST_WDTH_MASK (3 << 10)
+#define SLP_S3_MIN_ASST_WDTH_60USEC (0 << 10)
+#define SLP_S3_MIN_ASST_WDTH_1MS (1 << 10)
+#define SLP_S3_MIN_ASST_WDTH_50MS (2 << 10)
+#define SLP_S3_MIN_ASST_WDTH_2S (3 << 10)
+#define HOST_RST_STS (1 << 9)
+#define ESPI_SMI_LOCK (1 << 8)
+#define S4MAW_MASK (3 << 4)
+#define S4MAW_1S (1 << 4)
+#define S4MAW_2S (2 << 4)
+#define S4MAW_3S (3 << 4)
+#define S4MAW_4S (0 << 4)
+#define S4ASE (1 << 3)
+#define PER_SMI_SEL_MASK (3 << 1)
+#define SMI_RATE_64S (0 << 1)
+#define SMI_RATE_32S (1 << 1)
+#define SMI_RATE_16S (2 << 1)
+#define SMI_RATE_8S (3 << 1)
+#define SLEEP_AFTER_POWER_FAIL (1 << 0)
+
+#define GEN_PMCON_B 0x1024
+#define SLP_STR_POL_LOCK (1 << 18)
+#define ACPI_BASE_LOCK (1 << 17)
+#define PM_DATA_BAR_DIS (1 << 16)
+#define WOL_EN_OVRD (1 << 13)
+#define BIOS_PCI_EXP_EN (1 << 10)
+#define PWRBTN_LVL (1 << 9)
+#define SMI_LOCK (1 << 4)
+#define RTC_BATTERY_DEAD (1 << 2)
+
+#define ETR 0x1048
+#define CF9_LOCK (1 << 31)
+#define CF9_GLB_RST (1 << 20)
+
+#define SSML 0x104C
+#define SSML_SSL_DS (0 << 0)
+#define SSML_SSL_EN (1 << 0)
+
+#define SSMC 0x1050
+#define SSMC_SSMS (1 << 0)
+
+#define SSMD 0x1054
+#define SSMD_SSD_MASK (0xffff << 0)
+
+#define PRSTS 0x1810
+
+#define S3_PWRGATE_POL 0x1828
+#define S3DC_GATE_SUS (1 << 1)
+#define S3AC_GATE_SUS (1 << 0)
+
+#define S4_PWRGATE_POL 0x182c
+#define S4DC_GATE_SUS (1 << 1)
+#define S4AC_GATE_SUS (1 << 0)
+
+#define S5_PWRGATE_POL 0x1830
+#define S5DC_GATE_SUS (1 << 15)
+#define S5AC_GATE_SUS (1 << 14)
+
+#define DSX_CFG 0x1834
+#define REQ_CNV_NOWAKE_DSX (1 << 4)
+#define REQ_BATLOW_DSX (1 << 3)
+#define DSX_EN_WAKE_PIN (1 << 2)
+#define DSX_DIS_AC_PRESENT_PD (1 << 1)
+#define DSX_EN_LAN_WAKE_PIN (1 << 0)
+#define DSX_CFG_MASK (0x1f << 0)
+
+#define PMSYNC_TPR_CFG 0x18C4
+#define PCH2CPU_TPR_CFG_LOCK (1 << 31)
+#define PCH2CPU_TT_EN (1 << 26)
+
+#define PCH_PWRM_ACPI_TMR_CTL 0x18FC
+#define GPIO_GPE_CFG 0x1920
+#define GPE0_DWX_MASK 0xf
+#define GPE0_DW_SHIFT(x) (4*(x))
+
+#define PMC_GPP_G 0x0
+#define PMC_GPP_B 0x1
+#define PMC_GPP_A 0x2
+#define PMC_GPP_R 0x3
+#define PMC_GPP_S 0x4
+#define PMC_GPD 0x5
+#define PMC_GPP_H 0x6
+#define PMC_GPP_D 0x7
+#define PMC_GPP_F 0x8
+#define PMC_GPP_C 0xA
+#define PMC_GPP_E 0xB
+
+#define GBLRST_CAUSE0 0x1924
+#define GBLRST_CAUSE0_THERMTRIP (1 << 5)
+#define GBLRST_CAUSE1 0x1928
+
+#define CPPMVRIC 0x1B1C
+#define XTALSDQDIS (1 << 22)
+
+#define IRQ_REG ACTL
+#define SCI_IRQ_ADJUST 0
+#define ACTL 0x1BD8
+#define PWRM_EN (1 << 8)
+#define ACPI_EN (1 << 7)
+#define SCI_IRQ_SEL (7 << 0)
+
+#define SCIS_IRQ9 0
+#define SCIS_IRQ10 1
+#define SCIS_IRQ11 2
+#define SCIS_IRQ20 4
+#define SCIS_IRQ21 5
+#define SCIS_IRQ22 6
+#define SCIS_IRQ23 7
+#endif
diff --git a/src/soc/intel/tigerlake/include/soc/ramstage.h b/src/soc/intel/tigerlake/include/soc/ramstage.h
new file mode 100644
index 0000000..606e2ff
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/ramstage.h
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_RAMSTAGE_H_
+#define _SOC_RAMSTAGE_H_
+
+#include <device/device.h>
+#include <fsp/api.h>
+#include <fsp/util.h>
+#include <soc/soc_chip.h>
+
+void mainboard_silicon_init_params(FSP_S_CONFIG *params);
+void soc_init_pre_device(void *chip_info);
+
+#endif
diff --git a/src/soc/intel/tigerlake/include/soc/serialio.h b/src/soc/intel/tigerlake/include/soc/serialio.h
new file mode 100644
index 0000000..cdf5515
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/serialio.h
@@ -0,0 +1,48 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SERIALIO_H_
+#define _SERIALIO_H_
+
+enum {
+ PchSerialIoDisabled,
+ PchSerialIoPci,
+ PchSerialIoHidden,
+ PchSerialIoLegacyUart,
+ PchSerialIoSkipInit
+};
+
+enum {
+ PchSerialIoIndexI2C0,
+ PchSerialIoIndexI2C1,
+ PchSerialIoIndexI2C2,
+ PchSerialIoIndexI2C3,
+ PchSerialIoIndexI2C4,
+ PchSerialIoIndexI2C5
+};
+
+enum {
+ PchSerialIoIndexGSPI0,
+ PchSerialIoIndexGSPI1,
+ PchSerialIoIndexGSPI2
+};
+
+enum {
+ PchSerialIoIndexUART0,
+ PchSerialIoIndexUART1,
+ PchSerialIoIndexUART2
+};
+
+#endif
diff --git a/src/soc/intel/tigerlake/include/soc/smm.h b/src/soc/intel/tigerlake/include/soc/smm.h
new file mode 100644
index 0000000..4393167
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/smm.h
@@ -0,0 +1,38 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_SMM_H_
+#define _SOC_SMM_H_
+
+#include <stdint.h>
+#include <cpu/x86/msr.h>
+#include <cpu/x86/smm.h>
+#include <soc/gpio.h>
+
+
+struct smm_relocation_params {
+ uintptr_t ied_base;
+ size_t ied_size;
+ msr_t smrr_base;
+ msr_t smrr_mask;
+ /*
+ * The smm_save_state_in_msrs field indicates if SMM save state
+ * locations live in MSRs. This indicates to the CPUs how to adjust
+ * the SMMBASE and IEDBASE
+ */
+ int smm_save_state_in_msrs;
+};
+
+#endif
diff --git a/src/soc/intel/tigerlake/include/soc/usb.h b/src/soc/intel/tigerlake/include/soc/usb.h
new file mode 100644
index 0000000..d2e50ef
--- /dev/null
+++ b/src/soc/intel/tigerlake/include/soc/usb.h
@@ -0,0 +1,152 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#ifndef _SOC_USB_H_
+#define _SOC_USB_H_
+
+#include <stdint.h>
+
+/* Per Port HS Transmitter Emphasis */
+#define USB2_EMP_OFF 0
+#define USB2_DE_EMP_ON 1
+#define USB2_PRE_EMP_ON 2
+#define USB2_DE_EMP_ON_PRE_EMP_ON 3
+
+/* Per Port Half Bit Pre-emphasis */
+#define USB2_FULL_BIT_PRE_EMP 0
+#define USB2_HALF_BIT_PRE_EMP 1
+
+/* Per Port HS Preemphasis Bias */
+#define USB2_BIAS_0MV 0
+#define USB2_BIAS_11P25MV 1
+#define USB2_BIAS_16P9MV 2
+#define USB2_BIAS_28P15MV 3
+#define USB2_BIAS_39P35MV 5
+#define USB2_BIAS_45MV 6
+#define USB2_BIAS_56P3MV 7
+
+struct usb2_port_config {
+ uint8_t enable;
+ uint8_t ocpin;
+ uint8_t tx_bias;
+ uint8_t tx_emp_enable;
+ uint8_t pre_emp_bias;
+ uint8_t pre_emp_bit;
+};
+
+/* USB Overcurrent pins definition */
+enum {
+ OC0 = 0,
+ OC1,
+ OC2,
+ OC3,
+ OC4,
+ OC5,
+ OC6,
+ OC7,
+ OCMAX,
+ OC_SKIP = 0xff, /* Skip OC programming */
+};
+
+/* Standard USB Port based on length:
+ * - External
+ * - Back Panel
+ * - OTG
+ * - M.2
+ * - Internal device down */
+
+#define USB2_PORT_EMPTY { \
+ .enable = 0, \
+ .ocpin = OC_SKIP, \
+ .tx_bias = USB2_BIAS_0MV, \
+ .tx_emp_enable = USB2_EMP_OFF, \
+ .pre_emp_bias = USB2_BIAS_0MV, \
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \
+}
+
+/* Length = 11.5"-12" */
+#define USB2_PORT_LONG(pin) { \
+ .enable = 1, \
+ .ocpin = (pin), \
+ .tx_bias = USB2_BIAS_39P35MV, \
+ .tx_emp_enable = USB2_PRE_EMP_ON, \
+ .pre_emp_bias = USB2_BIAS_56P3MV, \
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \
+}
+
+/* Length = 6"-11.49" */
+#define USB2_PORT_MID(pin) { \
+ .enable = 1, \
+ .ocpin = (pin), \
+ .tx_bias = USB2_BIAS_0MV, \
+ .tx_emp_enable = USB2_PRE_EMP_ON, \
+ .pre_emp_bias = USB2_BIAS_56P3MV, \
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \
+}
+
+/* Length = 3"-5.99" */
+#define USB2_PORT_SHORT(pin) { \
+ .enable = 1, \
+ .ocpin = (pin), \
+ .tx_bias = USB2_BIAS_39P35MV, \
+ .tx_emp_enable = USB2_PRE_EMP_ON | USB2_DE_EMP_ON, \
+ .pre_emp_bias = USB2_BIAS_39P35MV, \
+ .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, \
+}
+
+/* Max TX and Pre-emp settings */
+#define USB2_PORT_MAX(pin) { \
+ .enable = 1, \
+ .ocpin = (pin), \
+ .tx_bias = USB2_BIAS_56P3MV, \
+ .tx_emp_enable = USB2_PRE_EMP_ON, \
+ .pre_emp_bias = USB2_BIAS_56P3MV, \
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \
+}
+
+/* Type-C Port, no BC1.2 charge detect module / MUX
+ * Length = 3.0" - 9.00" */
+#define USB2_PORT_TYPE_C(pin) { \
+ .enable = 1, \
+ .ocpin = (pin), \
+ .tx_bias = USB2_BIAS_0MV, \
+ .tx_emp_enable = USB2_PRE_EMP_ON, \
+ .pre_emp_bias = USB2_BIAS_56P3MV, \
+ .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \
+}
+
+struct usb3_port_config {
+ uint8_t enable;
+ uint8_t ocpin;
+ uint8_t tx_de_emp;
+ uint8_t tx_downscale_amp;
+};
+
+#define USB3_PORT_EMPTY { \
+ .enable = 0, \
+ .ocpin = OC_SKIP, \
+ .tx_de_emp = 0x00, \
+ .tx_downscale_amp = 0x00, \
+}
+
+#define USB3_PORT_DEFAULT(pin) { \
+ .enable = 1, \
+ .ocpin = (pin), \
+ .tx_de_emp = 0x0, \
+ .tx_downscale_amp = 0x00, \
+}
+
+#endif
diff --git a/src/soc/intel/tigerlake/lockdown.c b/src/soc/intel/tigerlake/lockdown.c
new file mode 100644
index 0000000..08ae4ef
--- /dev/null
+++ b/src/soc/intel/tigerlake/lockdown.c
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor PCH Datasheet
+ * Document number: 575857
+ * Chapter number: 4
+ */
+
+#include <device/mmio.h>
+#include <intelblocks/cfg.h>
+#include <intelpch/lockdown.h>
+#include <soc/pm.h>
+
+static void pmc_lock_pmsync(void)
+{
+ uint8_t *pmcbase;
+ uint32_t pmsyncreg;
+
+ pmcbase = pmc_mmio_regs();
+
+ pmsyncreg = read32(pmcbase + PMSYNC_TPR_CFG);
+ pmsyncreg |= PCH2CPU_TPR_CFG_LOCK;
+ write32(pmcbase + PMSYNC_TPR_CFG, pmsyncreg);
+}
+
+static void pmc_lock_abase(void)
+{
+ uint8_t *pmcbase;
+ uint32_t reg32;
+
+ pmcbase = pmc_mmio_regs();
+
+ reg32 = read32(pmcbase + GEN_PMCON_B);
+ reg32 |= (SLP_STR_POL_LOCK | ACPI_BASE_LOCK);
+ write32(pmcbase + GEN_PMCON_B, reg32);
+}
+
+static void pmc_lock_smi(void)
+{
+ uint8_t *pmcbase;
+ uint8_t reg8;
+
+ pmcbase = pmc_mmio_regs();
+
+ reg8 = read8(pmcbase + GEN_PMCON_B);
+ reg8 |= SMI_LOCK;
+ write8(pmcbase + GEN_PMCON_B, reg8);
+}
+
+static void pmc_lockdown_cfg(int chipset_lockdown)
+{
+ /* PMSYNC */
+ pmc_lock_pmsync();
+ /* Lock down ABASE and sleep stretching policy */
+ pmc_lock_abase();
+
+ if (chipset_lockdown == CHIPSET_LOCKDOWN_COREBOOT)
+ pmc_lock_smi();
+}
+
+void soc_lockdown_config(int chipset_lockdown)
+{
+ /* PMC lock down configuration */
+ pmc_lockdown_cfg(chipset_lockdown);
+}
diff --git a/src/soc/intel/tigerlake/p2sb.c b/src/soc/intel/tigerlake/p2sb.c
new file mode 100644
index 0000000..f5a3e70
--- /dev/null
+++ b/src/soc/intel/tigerlake/p2sb.c
@@ -0,0 +1,49 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor PCH Datasheet
+ * Document number: 575857
+ * Chapter number: 3
+ */
+
+#include <console/console.h>
+#include <intelblocks/p2sb.h>
+
+void p2sb_soc_get_sb_mask(uint32_t *ep_mask, size_t count)
+{
+ uint32_t mask;
+
+ if (count != P2SB_EP_MASK_MAX_REG) {
+ printk(BIOS_ERR, "Unable to program EPMASK registers\n");
+ return;
+ }
+
+ /* Remove the host accessing right to PSF register range.
+ * Set p2sb PCI offset EPMASK5 [29, 28, 27, 26] to disable Sideband
+ * access for PCI Root Bridge.
+ */
+ mask = (1 << 29) | (1 << 28) | (1 << 27) | (1 << 26);
+
+ ep_mask[P2SB_EP_MASK_5_REG] = mask;
+
+ /*
+ * Set p2sb PCI offset EPMASK7 [31, 30] to disable Sideband
+ * access for Broadcast and Multicast.
+ */
+ mask = (1 << 31) | (1 << 30);
+
+ ep_mask[P2SB_EP_MASK_7_REG] = mask;
+}
diff --git a/src/soc/intel/tigerlake/pmc.c b/src/soc/intel/tigerlake/pmc.c
new file mode 100644
index 0000000..65284ec
--- /dev/null
+++ b/src/soc/intel/tigerlake/pmc.c
@@ -0,0 +1,114 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor PCH Datasheet
+ * Document number: 575857
+ * Chapter number: 4
+ */
+
+#include <bootstate.h>
+#include <console/console.h>
+#include <device/mmio.h>
+#include <device/device.h>
+#include <intelblocks/pmc.h>
+#include <intelblocks/pmclib.h>
+#include <intelblocks/rtc.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/soc_chip.h>
+
+/*
+ * Set which power state system will be after reapplying
+ * the power (from G3 State)
+ */
+void pmc_soc_set_afterg3_en(const bool on)
+{
+ uint8_t reg8;
+ uint8_t *const pmcbase = pmc_mmio_regs();
+
+ reg8 = read8(pmcbase + GEN_PMCON_A);
+ if (on)
+ reg8 &= ~SLEEP_AFTER_POWER_FAIL;
+ else
+ reg8 |= SLEEP_AFTER_POWER_FAIL;
+ write8(pmcbase + GEN_PMCON_A, reg8);
+}
+
+static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
+{
+ uint32_t reg;
+ uint8_t *pmcbase = pmc_mmio_regs();
+
+ printk(BIOS_DEBUG, "%sabling Deep S%c\n",
+ enable ? "En" : "Dis", sx + '0');
+ reg = read32(pmcbase + offset);
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ write32(pmcbase + offset, reg);
+}
+
+static void config_deep_s5(int on_ac, int on_dc)
+{
+ /* Treat S4 the same as S5. */
+ config_deep_sX(S4_PWRGATE_POL, S4AC_GATE_SUS, 4, on_ac);
+ config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS, 4, on_dc);
+ config_deep_sX(S5_PWRGATE_POL, S5AC_GATE_SUS, 5, on_ac);
+ config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS, 5, on_dc);
+}
+
+static void config_deep_s3(int on_ac, int on_dc)
+{
+ config_deep_sX(S3_PWRGATE_POL, S3AC_GATE_SUS, 3, on_ac);
+ config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS, 3, on_dc);
+}
+
+static void config_deep_sx(uint32_t deepsx_config)
+{
+ uint32_t reg;
+ uint8_t *pmcbase = pmc_mmio_regs();
+
+ reg = read32(pmcbase + DSX_CFG);
+ reg &= ~DSX_CFG_MASK;
+ reg |= deepsx_config;
+ write32(pmcbase + DSX_CFG, reg);
+}
+
+static void pmc_init(void *unused)
+{
+ const config_t *config = config_of_soc();
+
+ rtc_init();
+
+ pmc_set_power_failure_state(true);
+ pmc_gpe_init();
+
+ pmc_set_acpi_mode();
+
+ config_deep_s3(config->deep_s3_enable_ac, config->deep_s3_enable_dc);
+ config_deep_s5(config->deep_s5_enable_ac, config->deep_s5_enable_dc);
+ config_deep_sx(config->deep_sx_config);
+}
+
+/*
+* Initialize PMC controller.
+*
+* PMC controller gets hidden from PCI bus during FSP-Silicon init call.
+* Hence PCI enumeration can't be used to initialize bus device and
+* allocate resources.
+*/
+BOOT_STATE_INIT_ENTRY(BS_DEV_INIT_CHIPS, BS_ON_EXIT, pmc_init, NULL);
diff --git a/src/soc/intel/tigerlake/pmutil.c b/src/soc/intel/tigerlake/pmutil.c
new file mode 100644
index 0000000..53f8609
--- /dev/null
+++ b/src/soc/intel/tigerlake/pmutil.c
@@ -0,0 +1,276 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Helper functions for dealing with power management registers
+ * and the differences between PCH variants.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor PCH Datasheet
+ * Document number: 575857
+ * Chapter number: 4
+ */
+
+
+#define __SIMPLE_DEVICE__
+
+#include <device/mmio.h>
+#include <cbmem.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_def.h>
+#include <console/console.h>
+#include <intelblocks/pmclib.h>
+#include <intelblocks/rtc.h>
+#include <intelblocks/tco.h>
+#include <stdlib.h>
+#include <soc/espi.h>
+#include <soc/gpe.h>
+#include <soc/gpio.h>
+#include <soc/iomap.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/smbus.h>
+#include <soc/soc_chip.h>
+#include <security/vboot/vbnv.h>
+
+/*
+ * SMI
+ */
+
+const char *const *soc_smi_sts_array(size_t *a)
+{
+ static const char *const smi_sts_bits[] = {
+ [BIOS_STS_BIT] = "BIOS",
+ [LEGACY_USB_STS_BIT] = "LEGACY_USB",
+ [SMI_ON_SLP_EN_STS_BIT] = "SLP_SMI",
+ [APM_STS_BIT] = "APM",
+ [SWSMI_TMR_STS_BIT] = "SWSMI_TMR",
+ [PM1_STS_BIT] = "PM1",
+ [GPE0_STS_BIT] = "GPE0",
+ [GPIO_STS_BIT] = "GPI",
+ [MCSMI_STS_BIT] = "MCSMI",
+ [DEVMON_STS_BIT] = "DEVMON",
+ [TCO_STS_BIT] = "TCO",
+ [PERIODIC_STS_BIT] = "PERIODIC",
+ [SERIRQ_SMI_STS_BIT] = "SERIRQ_SMI",
+ [SMBUS_SMI_STS_BIT] = "SMBUS_SMI",
+ [PCI_EXP_SMI_STS_BIT] = "PCI_EXP_SMI",
+ [MONITOR_STS_BIT] = "MONITOR",
+ [SPI_SMI_STS_BIT] = "SPI",
+ [GPIO_UNLOCK_SMI_STS_BIT] = "GPIO_UNLOCK",
+ [ESPI_SMI_STS_BIT] = "ESPI_SMI",
+ };
+
+ *a = ARRAY_SIZE(smi_sts_bits);
+ return smi_sts_bits;
+}
+
+/*
+ * TCO
+ */
+
+const char *const *soc_tco_sts_array(size_t *a)
+{
+ static const char *const tco_sts_bits[] = {
+ [0] = "NMI2SMI",
+ [1] = "SW_TCO",
+ [2] = "TCO_INT",
+ [3] = "TIMEOUT",
+ [7] = "NEWCENTURY",
+ [8] = "BIOSWR",
+ [9] = "DMISCI",
+ [10] = "DMISMI",
+ [12] = "DMISERR",
+ [13] = "SLVSEL",
+ [16] = "INTRD_DET",
+ [17] = "SECOND_TO",
+ [18] = "BOOT",
+ [20] = "SMLINK_SLV"
+ };
+
+ *a = ARRAY_SIZE(tco_sts_bits);
+ return tco_sts_bits;
+}
+
+/*
+ * GPE0
+ */
+
+const char *const *soc_std_gpe_sts_array(size_t *a)
+{
+ static const char *const gpe_sts_bits[] = {
+ [1] = "HOTPLUG",
+ [2] = "SWGPE",
+ [6] = "TCO_SCI",
+ [7] = "SMB_WAK",
+ [9] = "PCI_EXP",
+ [10] = "BATLOW",
+ [11] = "PME",
+ [12] = "ME",
+ [13] = "PME_B0",
+ [14] = "eSPI",
+ [15] = "GPIO Tier-2",
+ [16] = "LAN_WAKE",
+ [18] = "WADT"
+ };
+
+ *a = ARRAY_SIZE(gpe_sts_bits);
+ return gpe_sts_bits;
+}
+
+void pmc_set_disb(void)
+{
+ /* Set the DISB after DRAM init */
+ uint8_t disb_val;
+ /* Only care about bits [23:16] of register GEN_PMCON_A */
+ uint8_t *addr = (uint8_t *)(pmc_mmio_regs() + GEN_PMCON_A + 2);
+
+ disb_val = read8(addr);
+ disb_val |= (DISB >> 16);
+
+ /* Don't clear bits that are write-1-to-clear */
+ disb_val &= ~((MS4V | SUS_PWR_FLR) >> 16);
+ write8(addr, disb_val);
+}
+
+void pmc_clear_pmcon_sts(void)
+{
+ uint32_t reg_val;
+ uint8_t *addr;
+ addr = pmc_mmio_regs();
+
+ reg_val = read32(addr + GEN_PMCON_A);
+ /* Clear SUS_PWR_FLR, GBL_RST_STS, HOST_RST_STS, PWR_FLR bits
+ * while retaining MS4V write-1-to-clear bit */
+ reg_val &= ~(MS4V);
+
+ write32((addr + GEN_PMCON_A), reg_val);
+}
+
+/*
+ * PMC controller gets hidden from PCI bus
+ * during FSP-Silicon init call. Hence PWRMBASE
+ * can't be accessible using PCI configuration space
+ * read/write.
+ */
+uint8_t *pmc_mmio_regs(void)
+{
+ return (void *)(uintptr_t)PCH_PWRM_BASE_ADDRESS;
+}
+
+uintptr_t soc_read_pmc_base(void)
+{
+ return (uintptr_t)pmc_mmio_regs();
+}
+
+void soc_get_gpi_gpe_configs(uint8_t *dw0, uint8_t *dw1, uint8_t *dw2)
+{
+ DEVTREE_CONST struct soc_intel_tigerlake_config *config;
+
+ config = config_of_soc();
+
+ /* Assign to out variable */
+ *dw0 = config->gpe0_dw0;
+ *dw1 = config->gpe0_dw1;
+ *dw2 = config->gpe0_dw2;
+}
+
+static int rtc_failed(uint32_t gen_pmcon_b)
+{
+ return !!(gen_pmcon_b & RTC_BATTERY_DEAD);
+}
+
+int soc_get_rtc_failed(void)
+{
+ const struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE);
+
+ if (!ps) {
+ printk(BIOS_ERR, "Could not find power state in cbmem, RTC init aborted\n");
+ return 1;
+ }
+
+ return rtc_failed(ps->gen_pmcon_b);
+}
+
+int vbnv_cmos_failed(void)
+{
+ return rtc_failed(read32(pmc_mmio_regs() + GEN_PMCON_B));
+}
+
+static inline int deep_s3_enabled(void)
+{
+ uint32_t deep_s3_pol;
+
+ deep_s3_pol = read32(pmc_mmio_regs() + S3_PWRGATE_POL);
+ return !!(deep_s3_pol & (S3DC_GATE_SUS | S3AC_GATE_SUS));
+}
+
+/* Return 0, 3, or 5 to indicate the previous sleep state. */
+int soc_prev_sleep_state(const struct chipset_power_state *ps,
+ int prev_sleep_state)
+{
+
+ /*
+ * Check for any power failure to determine if this a wake from
+ * S5 because the PCH does not set the WAK_STS bit when waking
+ * from a true G3 state.
+ */
+ if (ps->gen_pmcon_a & (PWR_FLR | SUS_PWR_FLR))
+ prev_sleep_state = ACPI_S5;
+
+ /*
+ * If waking from S3 determine if deep S3 is enabled. If not,
+ * need to check both deep sleep well and normal suspend well.
+ * Otherwise just check deep sleep well.
+ */
+ if (prev_sleep_state == ACPI_S3) {
+ /* PWR_FLR represents deep sleep power well loss. */
+ uint32_t mask = PWR_FLR;
+
+ /* If deep s3 isn't enabled check the suspend well too. */
+ if (!deep_s3_enabled())
+ mask |= SUS_PWR_FLR;
+
+ if (ps->gen_pmcon_a & mask)
+ prev_sleep_state = ACPI_S5;
+ }
+
+ return prev_sleep_state;
+}
+
+void soc_fill_power_state(struct chipset_power_state *ps)
+{
+ uint8_t *pmc;
+
+ ps->tco1_sts = tco_read_reg(TCO1_STS);
+ ps->tco2_sts = tco_read_reg(TCO2_STS);
+
+ printk(BIOS_DEBUG, "TCO_STS: %04x %04x\n",
+ ps->tco1_sts, ps->tco2_sts);
+
+ pmc = pmc_mmio_regs();
+ ps->gen_pmcon_a = read32(pmc + GEN_PMCON_A);
+ ps->gen_pmcon_b = read32(pmc + GEN_PMCON_B);
+ ps->gblrst_cause[0] = read32(pmc + GBLRST_CAUSE0);
+ ps->gblrst_cause[1] = read32(pmc + GBLRST_CAUSE1);
+
+ printk(BIOS_DEBUG, "GEN_PMCON: %08x %08x\n",
+ ps->gen_pmcon_a, ps->gen_pmcon_b);
+
+ printk(BIOS_DEBUG, "GBLRST_CAUSE: %08x %08x\n",
+ ps->gblrst_cause[0], ps->gblrst_cause[1]);
+}
diff --git a/src/soc/intel/tigerlake/reset.c b/src/soc/intel/tigerlake/reset.c
new file mode 100644
index 0000000..674cf68
--- /dev/null
+++ b/src/soc/intel/tigerlake/reset.c
@@ -0,0 +1,47 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <cf9_reset.h>
+#include <console/console.h>
+#include <intelblocks/cse.h>
+#include <intelblocks/pmclib.h>
+#include <fsp/util.h>
+#include <soc/intel/common/reset.h>
+#include <soc/pci_devs.h>
+
+void do_global_reset(void)
+{
+ /* Ask CSE to do the global reset */
+ if (!send_heci_reset_req_message(GLOBAL_RESET))
+ return;
+
+ /* global reset if CSE fail to reset */
+ pmc_global_reset_enable(1);
+ do_full_reset();
+}
+
+void chipset_handle_reset(uint32_t status)
+{
+ switch (status) {
+ case FSP_STATUS_RESET_REQUIRED_3: /* Global Reset */
+ printk(BIOS_DEBUG, "GLOBAL RESET!!\n");
+ global_reset();
+ break;
+ default:
+ printk(BIOS_ERR, "unhandled reset type %x\n", status);
+ die("unknown reset type");
+ break;
+ }
+}
diff --git a/src/soc/intel/tigerlake/sd.c b/src/soc/intel/tigerlake/sd.c
new file mode 100644
index 0000000..bc9dd9b
--- /dev/null
+++ b/src/soc/intel/tigerlake/sd.c
@@ -0,0 +1,43 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor PCH Datasheet
+ * Document number: 575857
+ * Chapter number: 26
+ */
+
+#include <intelblocks/sd.h>
+#include <soc/soc_chip.h>
+
+int sd_fill_soc_gpio_info(struct acpi_gpio *gpio, struct device *dev)
+{
+ config_t *config = config_of(dev);
+
+ if (!config->sdcard_cd_gpio)
+ return -1;
+
+ gpio->type = ACPI_GPIO_TYPE_INTERRUPT;
+ gpio->pull = ACPI_GPIO_PULL_NONE;
+ gpio->irq.mode = ACPI_IRQ_EDGE_TRIGGERED;
+ gpio->irq.polarity = ACPI_IRQ_ACTIVE_BOTH;
+ gpio->irq.shared = ACPI_IRQ_SHARED;
+ gpio->irq.wake = ACPI_IRQ_WAKE;
+ gpio->interrupt_debounce_timeout = 10000; /* 100ms */
+ gpio->pin_count = 1;
+ gpio->pins[0] = config->sdcard_cd_gpio;
+
+ return 0;
+}
diff --git a/src/soc/intel/tigerlake/smihandler.c b/src/soc/intel/tigerlake/smihandler.c
new file mode 100644
index 0000000..bf07bea
--- /dev/null
+++ b/src/soc/intel/tigerlake/smihandler.c
@@ -0,0 +1,126 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/pci_def.h>
+#include <intelblocks/fast_spi.h>
+#include <intelblocks/p2sb.h>
+#include <intelblocks/pcr.h>
+#include <intelblocks/smihandler.h>
+#include <soc/p2sb.h>
+#include <soc/pci_devs.h>
+#include <soc/pcr_ids.h>
+#include <soc/pm.h>
+#include <soc/soc_chip.h>
+
+#define CSME0_FBE 0xf
+#define CSME0_BAR 0x0
+#define CSME0_FID 0xb0
+
+const struct smm_save_state_ops *get_smm_save_state_ops(void)
+{
+ return &em64t101_smm_ops;
+}
+
+static void pch_disable_heci(void)
+{
+ struct pcr_sbi_msg msg = {
+ .pid = PID_CSME0,
+ .offset = 0,
+ .opcode = PCR_WRITE,
+ .is_posted = false,
+ .fast_byte_enable = CSME0_FBE,
+ .bar = CSME0_BAR,
+ .fid = CSME0_FID
+ };
+ /* Bit 0: Set to make HECI#1 Function disable */
+ uint32_t data32 = 1;
+ uint8_t response;
+ int status;
+
+ /* unhide p2sb device */
+ p2sb_unhide();
+
+ /* Send SBI command to make HECI#1 function disable */
+ status = pcr_execute_sideband_msg(&msg, &data32, &response);
+ if (status && response)
+ printk(BIOS_ERR, "Fail to make CSME function disable\n");
+
+ /* Ensure to Lock SBI interface after this command */
+ p2sb_disable_sideband_access();
+
+ /* hide p2sb device */
+ p2sb_hide();
+}
+
+/*
+ * Specific SOC SMI handler during ramstage finalize phase
+ *
+ * BIOS can't make CSME function disable as is due to POSTBOOT_SAI
+ * restriction in place from TGP chipset. Hence create SMI Handler to
+ * perform CSME function disabling logic during SMM mode.
+ */
+void smihandler_soc_at_finalize(void)
+{
+ const struct soc_intel_tigerlake_config *config;
+
+ config = config_of_soc();
+
+ if (!config->HeciEnabled && CONFIG(HECI_DISABLE_USING_SMM))
+ pch_disable_heci();
+}
+
+void smihandler_soc_check_illegal_access(uint32_t tco_sts)
+{
+ if (!((tco_sts & (1 << 8)) && CONFIG(SPI_FLASH_SMM)
+ && fast_spi_wpd_status()))
+ return;
+
+ /*
+ * BWE is RW, so the SMI was caused by a
+ * write to BWE, not by a write to the BIOS
+ *
+ * This is the place where we notice someone
+ * is trying to tinker with the BIOS. We are
+ * trying to be nice and just ignore it. A more
+ * resolute answer would be to power down the
+ * box.
+ */
+ printk(BIOS_DEBUG, "Switching back to RO\n");
+ fast_spi_enable_wp();
+}
+
+/* SMI handlers that should be serviced in SCI mode too. */
+uint32_t smihandler_soc_get_sci_mask(void)
+{
+ uint32_t sci_mask =
+ SMI_HANDLER_SCI_EN(APM_STS_BIT) |
+ SMI_HANDLER_SCI_EN(SMI_ON_SLP_EN_STS_BIT);
+
+ return sci_mask;
+}
+
+const smi_handler_t southbridge_smi[SMI_STS_BITS] = {
+ [SMI_ON_SLP_EN_STS_BIT] = smihandler_southbridge_sleep,
+ [APM_STS_BIT] = smihandler_southbridge_apmc,
+ [PM1_STS_BIT] = smihandler_southbridge_pm1,
+ [GPE0_STS_BIT] = smihandler_southbridge_gpe0,
+ [GPIO_STS_BIT] = smihandler_southbridge_gpi,
+ [ESPI_SMI_STS_BIT] = smihandler_southbridge_espi,
+ [MCSMI_STS_BIT] = smihandler_southbridge_mc,
+ [TCO_STS_BIT] = smihandler_southbridge_tco,
+ [PERIODIC_STS_BIT] = smihandler_southbridge_periodic,
+ [MONITOR_STS_BIT] = smihandler_southbridge_monitor,
+};
diff --git a/src/soc/intel/tigerlake/smmrelocate.c b/src/soc/intel/tigerlake/smmrelocate.c
new file mode 100644
index 0000000..b3f9836
--- /dev/null
+++ b/src/soc/intel/tigerlake/smmrelocate.c
@@ -0,0 +1,273 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <types.h>
+#include <string.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/x86/mp.h>
+#include <cpu/x86/msr.h>
+#include <cpu/x86/mtrr.h>
+#include <cpu/x86/smm.h>
+#include <cpu/intel/em64t101_save_state.h>
+#include <cpu/intel/smm_reloc.h>
+#include <console/console.h>
+#include <soc/cpu.h>
+#include <soc/msr.h>
+#include <soc/pci_devs.h>
+#include <soc/smm.h>
+#include <soc/soc_chip.h>
+#include <soc/systemagent.h>
+
+/* This gets filled in and used during relocation. */
+static struct smm_relocation_params smm_reloc_params;
+
+static inline void write_smrr(struct smm_relocation_params *relo_params)
+{
+ printk(BIOS_DEBUG, "Writing SMRR. base = 0x%08x, mask=0x%08x\n",
+ relo_params->smrr_base.lo, relo_params->smrr_mask.lo);
+ wrmsr(IA32_SMRR_PHYS_BASE, relo_params->smrr_base);
+ wrmsr(IA32_SMRR_PHYS_MASK, relo_params->smrr_mask);
+}
+
+static void update_save_state(int cpu, uintptr_t curr_smbase,
+ uintptr_t staggered_smbase,
+ struct smm_relocation_params *relo_params)
+{
+ u32 smbase;
+ u32 iedbase;
+
+ /*
+ * The relocated handler runs with all CPUs concurrently. Therefore
+ * stagger the entry points adjusting SMBASE downwards by save state
+ * size * CPU num.
+ */
+ smbase = staggered_smbase;
+ iedbase = relo_params->ied_base;
+
+ printk(BIOS_DEBUG, "New SMBASE=0x%08x IEDBASE=0x%08x\n",
+ smbase, iedbase);
+
+ /*
+ * All threads need to set IEDBASE and SMBASE to the relocated
+ * handler region. However, the save state location depends on the
+ * smm_save_state_in_msrs field in the relocation parameters. If
+ * smm_save_state_in_msrs is non-zero then the CPUs are relocating
+ * the SMM handler in parallel, and each CPUs save state area is
+ * located in their respective MSR space. If smm_save_state_in_msrs
+ * is zero then the SMM relocation is happening serially so the
+ * save state is at the same default location for all CPUs.
+ */
+ if (relo_params->smm_save_state_in_msrs) {
+ msr_t smbase_msr;
+ msr_t iedbase_msr;
+
+ smbase_msr.lo = smbase;
+ smbase_msr.hi = 0;
+
+ /*
+ * According the BWG the IEDBASE MSR is in bits 63:32. It's
+ * not clear why it differs from the SMBASE MSR.
+ */
+ iedbase_msr.lo = 0;
+ iedbase_msr.hi = iedbase;
+
+ wrmsr(SMBASE_MSR, smbase_msr);
+ wrmsr(IEDBASE_MSR, iedbase_msr);
+ } else {
+ em64t101_smm_state_save_area_t *save_state;
+
+ save_state = (void *)(curr_smbase + SMM_DEFAULT_SIZE -
+ sizeof(*save_state));
+
+ save_state->smbase = smbase;
+ save_state->iedbase = iedbase;
+ }
+}
+
+/* Returns 1 if SMM MSR save state was set. */
+static int bsp_setup_msr_save_state(struct smm_relocation_params *relo_params)
+{
+ msr_t smm_mca_cap;
+
+ smm_mca_cap = rdmsr(SMM_MCA_CAP_MSR);
+ if (smm_mca_cap.hi & SMM_CPU_SVRSTR_MASK) {
+ msr_t smm_feature_control;
+
+ smm_feature_control = rdmsr(SMM_FEATURE_CONTROL_MSR);
+ smm_feature_control.hi = 0;
+ smm_feature_control.lo |= SMM_CPU_SAVE_EN;
+ wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control);
+ relo_params->smm_save_state_in_msrs = 1;
+ }
+ return relo_params->smm_save_state_in_msrs;
+}
+
+/*
+ * The relocation work is actually performed in SMM context, but the code
+ * resides in the ramstage module. This occurs by trampolining from the default
+ * SMRAM entry point to here.
+ */
+void smm_relocation_handler(int cpu, uintptr_t curr_smbase,
+ uintptr_t staggered_smbase)
+{
+ msr_t mtrr_cap;
+ struct smm_relocation_params *relo_params = &smm_reloc_params;
+
+ printk(BIOS_DEBUG, "In relocation handler: CPU %d\n", cpu);
+
+ /*
+ * Determine if the processor supports saving state in MSRs. If so,
+ * enable it before the non-BSPs run so that SMM relocation can occur
+ * in parallel in the non-BSP CPUs.
+ */
+ if (cpu == 0) {
+ /*
+ * If smm_save_state_in_msrs is 1 then that means this is the
+ * 2nd time through the relocation handler for the BSP.
+ * Parallel SMM handler relocation is taking place. However,
+ * it is desired to access other CPUs save state in the real
+ * SMM handler. Therefore, disable the SMM save state in MSRs
+ * feature.
+ */
+ if (relo_params->smm_save_state_in_msrs) {
+ msr_t smm_feature_control;
+
+ smm_feature_control = rdmsr(SMM_FEATURE_CONTROL_MSR);
+ smm_feature_control.lo &= ~SMM_CPU_SAVE_EN;
+ wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control);
+ } else if (bsp_setup_msr_save_state(relo_params))
+ /*
+ * Just return from relocation handler if MSR save
+ * state is enabled. In that case the BSP will come
+ * back into the relocation handler to setup the new
+ * SMBASE as well disabling SMM save state in MSRs.
+ */
+ return;
+ }
+
+ /* Make appropriate changes to the save state map. */
+ update_save_state(cpu, curr_smbase, staggered_smbase, relo_params);
+
+ /* Write SMRR MSRs based on indicated support. */
+ mtrr_cap = rdmsr(MTRR_CAP_MSR);
+ if (mtrr_cap.lo & SMRR_SUPPORTED)
+ write_smrr(relo_params);
+}
+
+static void fill_in_relocation_params(struct smm_relocation_params *params)
+{
+ uintptr_t tseg_base;
+ size_t tseg_size;
+ /* All range registers are aligned to 4KiB */
+ const u32 rmask = ~(4 * KiB - 1);
+
+ smm_region(&tseg_base, &tseg_size);
+
+ if (!IS_ALIGNED(tseg_base, tseg_size)) {
+ printk(BIOS_WARNING,
+ "TSEG base not aligned with TSEG SIZE! Not setting SMRR\n");
+ return;
+ }
+
+ smm_subregion(SMM_SUBREGION_CHIPSET, ¶ms->ied_base, ¶ms->ied_size);
+
+ /* SMRR has 32-bits of valid address aligned to 4KiB. */
+ params->smrr_base.lo = (tseg_base & rmask) | MTRR_TYPE_WRBACK;
+ params->smrr_base.hi = 0;
+ params->smrr_mask.lo = (~(tseg_size - 1) & rmask) | MTRR_PHYS_MASK_VALID;
+ params->smrr_mask.hi = 0;
+}
+
+static void setup_ied_area(struct smm_relocation_params *params)
+{
+ char *ied_base;
+
+ struct ied_header ied = {
+ .signature = "INTEL RSVD",
+ .size = params->ied_size,
+ .reserved = {0},
+ };
+
+ ied_base = (void *)params->ied_base;
+
+ printk(BIOS_DEBUG, "IED base = 0x%08x\n", (u32)params->ied_base);
+ printk(BIOS_DEBUG, "IED size = 0x%08x\n", (u32)params->ied_size);
+
+ /* Place IED header at IEDBASE. */
+ memcpy(ied_base, &ied, sizeof(ied));
+
+ /* Zero out 32KiB at IEDBASE + 1MiB */
+ memset(ied_base + 1 * MiB, 0, 32 * KiB);
+}
+
+void smm_info(uintptr_t *perm_smbase, size_t *perm_smsize,
+ size_t *smm_save_state_size)
+{
+ printk(BIOS_DEBUG, "Setting up SMI for CPU\n");
+
+ fill_in_relocation_params(&smm_reloc_params);
+
+ smm_subregion(SMM_SUBREGION_HANDLER, perm_smbase, perm_smsize);
+
+ if (smm_reloc_params.ied_size)
+ setup_ied_area(&smm_reloc_params);
+
+ *smm_save_state_size = sizeof(em64t101_smm_state_save_area_t);
+}
+
+void smm_initialize(void)
+{
+ /* Clear the SMM state in the southbridge. */
+ smm_southbridge_clear_state();
+
+ /*
+ * Run the relocation handler for on the BSP to check and set up
+ * parallel SMM relocation.
+ */
+ smm_initiate_relocation();
+
+ if (smm_reloc_params.smm_save_state_in_msrs)
+ printk(BIOS_DEBUG, "Doing parallel SMM relocation.\n");
+}
+
+void smm_relocate(void)
+{
+ /*
+ * If smm_save_state_in_msrs is non-zero then parallel SMM relocation
+ * shall take place. Run the relocation handler a second time on the
+ * BSP to do * the final move. For APs, a relocation handler always
+ * needs to be run.
+ */
+ if (smm_reloc_params.smm_save_state_in_msrs)
+ smm_initiate_relocation_parallel();
+ else if (!boot_cpu())
+ smm_initiate_relocation();
+}
+
+void smm_lock(void)
+{
+ struct device *sa_dev = pcidev_path_on_root(SA_DEVFN_ROOT);
+ /*
+ * LOCK the SMM memory window and enable normal SMM.
+ * After running this function, only a full reset can
+ * make the SMM registers writable again.
+ */
+ printk(BIOS_DEBUG, "Locking SMM.\n");
+ pci_write_config8(sa_dev, SMRAM, D_LCK | G_SMRAME | C_BASE_SEG);
+}
diff --git a/src/soc/intel/tigerlake/spi.c b/src/soc/intel/tigerlake/spi.c
new file mode 100644
index 0000000..df4a593
--- /dev/null
+++ b/src/soc/intel/tigerlake/spi.c
@@ -0,0 +1,39 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor PCH Datasheet
+ * Document number: 575857
+ * Chapter number: 7
+ */
+
+#include <intelblocks/spi.h>
+#include <soc/pci_devs.h>
+
+int spi_soc_devfn_to_bus(unsigned int devfn)
+{
+ switch (devfn) {
+ case PCH_DEVFN_SPI:
+ return 0;
+ case PCH_DEVFN_GSPI0:
+ return 1;
+ case PCH_DEVFN_GSPI1:
+ return 2;
+ case PCH_DEVFN_GSPI2:
+ return 3;
+ }
+ return -1;
+}
diff --git a/src/soc/intel/tigerlake/systemagent.c b/src/soc/intel/tigerlake/systemagent.c
new file mode 100644
index 0000000..9c8f645
--- /dev/null
+++ b/src/soc/intel/tigerlake/systemagent.c
@@ -0,0 +1,73 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor SA Datasheet
+ * Document number: 571131
+ * Chapter number: 3
+ */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <intelblocks/systemagent.h>
+#include <soc/iomap.h>
+#include <soc/systemagent.h>
+
+/*
+ * SoC implementation
+ *
+ * Add all known fixed memory ranges for Host Controller/Memory
+ * controller.
+ */
+void soc_add_fixed_mmio_resources(struct device *dev, int *index)
+{
+ static const struct sa_mmio_descriptor soc_fixed_resources[] = {
+ { PCIEXBAR, CONFIG_MMCONF_BASE_ADDRESS, CONFIG_SA_PCIEX_LENGTH,
+ "PCIEXBAR" },
+ { MCHBAR, MCH_BASE_ADDRESS, MCH_BASE_SIZE, "MCHBAR" },
+ { DMIBAR, DMI_BASE_ADDRESS, DMI_BASE_SIZE, "DMIBAR" },
+ { EPBAR, EP_BASE_ADDRESS, EP_BASE_SIZE, "EPBAR" },
+ { REGBAR, REG_BASE_ADDRESS, REG_BASE_SIZE, "REGBAR" },
+ { EDRAMBAR, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE, "EDRAMBAR" },
+ /*
+ * PMC pci device gets hidden from PCI bus due to Silicon
+ * policy hence binding PMCBAR aka PWRMBASE (offset 0x10) with
+ * SA resources to ensure that PMCBAR falls under PCI reserved
+ * memory range.
+ *
+ * Note: Don't add any more resource with same offset 0x10
+ * under this device space.
+ */
+ { PCI_BASE_ADDRESS_0, PCH_PWRM_BASE_ADDRESS, PCH_PWRM_BASE_SIZE,
+ "PMCBAR" },
+ };
+
+ sa_add_fixed_mmio_resources(dev, index, soc_fixed_resources,
+ ARRAY_SIZE(soc_fixed_resources));
+}
+
+/*
+ * SoC implementation
+ *
+ * Perform System Agent Initialization during Ramstage phase.
+ */
+void soc_systemagent_init(struct device *dev)
+{
+ /* Enable Power Aware Interrupt Routing */
+ enable_power_aware_intr();
+
+ /* Enable BIOS Reset CPL */
+ enable_bios_reset_cpl();
+}
diff --git a/src/soc/intel/tigerlake/uart.c b/src/soc/intel/tigerlake/uart.c
new file mode 100644
index 0000000..b330e77
--- /dev/null
+++ b/src/soc/intel/tigerlake/uart.c
@@ -0,0 +1,76 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor PCH Datasheet
+ * Document number: 575857
+ * Chapter number: 9
+ */
+
+#include <console/console.h>
+#include <device/pci_def.h>
+#include <intelblocks/gpio.h>
+#include <intelblocks/lpss.h>
+#include <intelblocks/pcr.h>
+#include <intelblocks/uart.h>
+#include <soc/iomap.h>
+#include <soc/pch.h>
+#include <soc/pci_devs.h>
+#include <soc/pcr_ids.h>
+
+const struct uart_gpio_pad_config uart_gpio_pads[] = {
+ {
+ .console_index = 0,
+ .gpios = {
+ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), /* UART0 RX */
+ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), /* UART0 TX */
+ },
+ },
+ {
+ .console_index = 1,
+ .gpios = {
+ PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1), /* UART1 RX */
+ PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1), /* UART1 TX */
+ },
+ },
+ {
+ .console_index = 2,
+ .gpios = {
+ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* UART2 RX */
+ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* UART2 TX */
+ },
+ }
+};
+
+const int uart_max_index = ARRAY_SIZE(uart_gpio_pads);
+
+DEVTREE_CONST struct device *soc_uart_console_to_device(int uart_console)
+{
+ /*
+ * if index is valid, this function will return corresponding structure
+ * for uart console else will return NULL.
+ */
+ switch (uart_console) {
+ case 0:
+ return pcidev_path_on_root(PCH_DEVFN_UART0);
+ case 1:
+ return pcidev_path_on_root(PCH_DEVFN_UART1);
+ case 2:
+ return pcidev_path_on_root(PCH_DEVFN_UART2);
+ default:
+ printk(BIOS_ERR, "Invalid UART console index\n");
+ return NULL;
+ }
+}