ec/google/wilco: Clear S0ix support bit at boot
To ensure the power button functions as expected in firmware ensure
that the EC is not in "S0ix supported OS" mode and expecting the
power button to be handled by the virtual button interface.
BUG=b:128409889
TEST=Verify that the power button works at the developer screen
when the system is rebooted from within Chrome OS. Also ensure
that it works when external warm reset signal is asserted by H1.
Change-Id: Ic323515e3b8be08bac4f0f82e25f2f78c2f22833
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
diff --git a/src/ec/google/wilco/Kconfig b/src/ec/google/wilco/Kconfig
index e905d5e..4202c1d 100644
--- a/src/ec/google/wilco/Kconfig
+++ b/src/ec/google/wilco/Kconfig
@@ -2,6 +2,7 @@
bool
default n
select EC_GOOGLE_COMMON_MEC
+ select EC_ACPI
help
Google Wilco Embedded Controller interface.
diff --git a/src/ec/google/wilco/chip.c b/src/ec/google/wilco/chip.c
index a9caaec..0858e1c 100644
--- a/src/ec/google/wilco/chip.c
+++ b/src/ec/google/wilco/chip.c
@@ -13,8 +13,10 @@
* GNU General Public License for more details.
*/
+#include <arch/acpi.h>
#include <bootstate.h>
#include <device/pnp.h>
+#include <ec/acpi/ec.h>
#include <pc80/keyboard.h>
#include <stdint.h>
#include <stdlib.h>
@@ -55,6 +57,13 @@
if (!dev->enabled)
return;
+ /* Disable S0ix support in EC RAM with ACPI EC interface */
+ if (!acpi_is_wakeup_s3()) {
+ ec_set_ports(CONFIG_EC_BASE_ACPI_COMMAND,
+ CONFIG_EC_BASE_ACPI_DATA);
+ ec_write(EC_RAM_S0IX_SUPPORT, 0);
+ }
+
/* Print EC firmware information */
wilco_ec_print_all_info();
diff --git a/src/ec/google/wilco/commands.h b/src/ec/google/wilco/commands.h
index 53f6d0f..9c1685b 100644
--- a/src/ec/google/wilco/commands.h
+++ b/src/ec/google/wilco/commands.h
@@ -50,6 +50,11 @@
KB_BIOS_PROGRESS = 0xc2,
};
+enum ec_ram_addr {
+ /* Indicate support for S0ix */
+ EC_RAM_S0IX_SUPPORT = 0xb8,
+};
+
enum set_acpi_mode_cmd {
ACPI_OFF = 0,
ACPI_ON