mb/starlabs/lite/glkr: Correct OverCurrent Pin
The USB ports use both OC0 and OC1. Whilst they work perfectly with
OC_SKIP, set them to the correct pins.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If173b443d9770083d76519b854b513d8e47b9e71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
diff --git a/src/mainboard/starlabs/lite/variants/glkr/devicetree.cb b/src/mainboard/starlabs/lite/variants/glkr/devicetree.cb
index 6dcbe20..18e6306 100644
--- a/src/mainboard/starlabs/lite/variants/glkr/devicetree.cb
+++ b/src/mainboard/starlabs/lite/variants/glkr/devicetree.cb
@@ -86,11 +86,11 @@
device pci 15.0 on # XHCI
### USB 2.0 Devices
# Motherboard USB Type C
- register "usb2_port[0]" = "PORT_EN(OC_SKIP)"
+ register "usb2_port[0]" = "PORT_EN(OC1)"
# Motherboard USB 3.0
- register "usb2_port[1]" = "PORT_EN(OC_SKIP)"
+ register "usb2_port[1]" = "PORT_EN(OC0)"
# Daughterboard USB 3.0
- register "usb2_port[3]" = "PORT_EN(OC_SKIP)"
+ register "usb2_port[3]" = "PORT_EN(OC1)"
# Daughterboard SD Card
register "usb2_port[5]" = "PORT_EN(OC_SKIP)"
# Internal Webcam
@@ -98,11 +98,11 @@
### USB 3.0 Devices
# Motherboard USB 3.0
- register "usb3_port[0]" = "PORT_EN(OC_SKIP)"
+ register "usb3_port[0]" = "PORT_EN(OC0)"
# Motherboard USB Type C
- register "usb3_port[1]" = "PORT_EN(OC_SKIP)"
+ register "usb3_port[1]" = "PORT_EN(OC1)"
# Daughterboard USB 3.0
- register "usb3_port[3]" = "PORT_EN(OC_SKIP)"
+ register "usb3_port[3]" = "PORT_EN(OC1)"
end
device pci 15.1 off end # XDCI
device pci 16.0 off end # I2C0