soc/rockchip: Fix typos
Change-Id: I85ccb9e1458340bd5bc2a0eb9abed8d0eeb2fe65
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
diff --git a/src/soc/rockchip/common/edp.c b/src/soc/rockchip/common/edp.c
index 18afc3a..060099c 100644
--- a/src/soc/rockchip/common/edp.c
+++ b/src/soc/rockchip/common/edp.c
@@ -135,7 +135,7 @@
static void rk_edp_init_aux(struct rk_edp *edp)
{
- /* Clear inerrupts related to AUX channel */
+ /* Clear interrupts related to AUX channel */
write32(&edp->regs->dp_int_sta, AUX_FUNC_EN_N);
/* Disable AUX channel module */
diff --git a/src/soc/rockchip/rk3288/hdmi.c b/src/soc/rockchip/rk3288/hdmi.c
index cd9890b..36a08a9 100644
--- a/src/soc/rockchip/rk3288/hdmi.c
+++ b/src/soc/rockchip/rk3288/hdmi.c
@@ -733,7 +733,7 @@
u32 trytime = 5;
u32 n, j, val;
- /* set ddc i2c clk which devided from ddc_clk to 100khz */
+ /* set ddc i2c clk which derived from ddc_clk to 100kHz */
write32(&hdmi_regs->i2cm_ss_scl_hcnt_0_addr, 0x7a);
write32(&hdmi_regs->i2cm_ss_scl_lcnt_0_addr, 0x8d);
clrsetbits32(&hdmi_regs->i2cm_div, HDMI_I2CM_DIV_FAST_STD_MODE,
diff --git a/src/soc/rockchip/rk3288/tsadc.c b/src/soc/rockchip/rk3288/tsadc.c
index de3d058..7a1e34d 100644
--- a/src/soc/rockchip/rk3288/tsadc.c
+++ b/src/soc/rockchip/rk3288/tsadc.c
@@ -100,7 +100,7 @@
/*
tsadc iomux must be set after the tshut polarity setting,
- since the tshut polarity defalut low active,
+ since the tshut polarity default low active,
so if you enable tsadc iomux,it will output high
*/
setbits32(&rk3288_pmu->iomux_tsadc_int, IOMUX_TSADC_INT);
diff --git a/src/soc/rockchip/rk3399/clock.c b/src/soc/rockchip/rk3399/clock.c
index 4cd2839..d2f5b7c 100644
--- a/src/soc/rockchip/rk3399/clock.c
+++ b/src/soc/rockchip/rk3399/clock.c
@@ -304,7 +304,7 @@
u32 output_khz = vco_khz / div->postdiv1 / div->postdiv2;
printk(BIOS_DEBUG, "PLL at %p: fbdiv=%d, refdiv=%d, postdiv1=%d, "
- "postdiv2=%d, vco=%u khz, output=%u khz\n",
+ "postdiv2=%d, vco=%u kHz, output=%u kHz\n",
pll_con, div->fbdiv, div->refdiv, div->postdiv1,
div->postdiv2, vco_khz, output_khz);
assert(vco_khz >= VCO_MIN_KHZ && vco_khz <= VCO_MAX_KHZ &&
@@ -485,7 +485,7 @@
/* some cru registers changed by bootrom, we'd better reset them to
* reset/default values described in TRM to avoid confusion in kernel.
- * Please consider these threee lines as a fix of bootrom bug.
+ * Please consider these three lines as a fix of bootrom bug.
*/
write32(&cru_ptr->clksel_con[12], 0xffff4101);
write32(&cru_ptr->clksel_con[19], 0xffff033f);
diff --git a/src/soc/rockchip/rk3399/mipi.c b/src/soc/rockchip/rk3399/mipi.c
index 751c8a5..5df5fdf 100644
--- a/src/soc/rockchip/rk3399/mipi.c
+++ b/src/soc/rockchip/rk3399/mipi.c
@@ -319,7 +319,7 @@
min_prediv = DIV_ROUND_UP(fref, 40 * MHz);
max_prediv = fref / (5 * MHz);
- /* constraint: 80MHz <= Fvco <= 1500Mhz */
+ /* constraint: 80MHz <= Fvco <= 1500MHz */
fvco_min = 80 * MHz;
fvco_max = 1500 * MHz;
min_delta = 1500 * MHz;
diff --git a/src/soc/rockchip/rk3399/tsadc.c b/src/soc/rockchip/rk3399/tsadc.c
index 1cdb355..9f69915 100644
--- a/src/soc/rockchip/rk3399/tsadc.c
+++ b/src/soc/rockchip/rk3399/tsadc.c
@@ -112,7 +112,7 @@
/* setup the automatic mode:
* AUTO_PERIOD: interleave between every two accessing of TSADC
- * AUTO_DEBOUNCE: only generate interrupt or TSHUT when temprature
+ * AUTO_DEBOUNCE: only generate interrupt or TSHUT when temperature
* is higher than COMP_INT for "debounce" times
* AUTO_PERIOD_HT: the interleave between every two accessing after the
* temperature is higher than COMP_SHUT or COMP_INT
@@ -123,7 +123,7 @@
write32(&rk3399_tsadc->hight_int_debounce, AUTO_DEBOUNCE);
write32(&rk3399_tsadc->auto_period_ht, AUTO_PERIOD_HT);
write32(&rk3399_tsadc->hight_tshut_debounce, AUTO_DEBOUNCE_HT);
- /* Enable the src0, negative temprature coefficient */
+ /* Enable the src0, negative temperature coefficient */
setbits32(&rk3399_tsadc->auto_con, Q_SEL | SRC0_EN);
udelay(100);
setbits32(&rk3399_tsadc->auto_con, AUTO_EN);