mb/google/rex: Drop `board_id` check while configuring GPIO
This patch drops the usage of reading `board_id()` while performing
the GPIO configuration.
The reason to drop the board_id check is to ensure that GPIO
configuration for MLB (mainboard) would remain the same and the only
GPIO PIN configuration that differs would be due to usage of having
different DBs (daughter board) which will be taken care using
CBI (and fw_config.c file) in coreboot.
Additionally, drop unused early GPIO default configuration table.
BUG=b:260804656
TEST=Able to perform the GPIO configuration and able to boot
Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I96cafd1c904001cbf4199977e9e721afe5eab470
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
diff --git a/src/mainboard/google/rex/variants/rex0/gpio.c b/src/mainboard/google/rex/variants/rex0/gpio.c
index ecda8bf..1a5e3f6 100644
--- a/src/mainboard/google/rex/variants/rex0/gpio.c
+++ b/src/mainboard/google/rex/variants/rex0/gpio.c
@@ -14,7 +14,7 @@
#include <boardid.h>
/* Pad configuration in ramstage */
-static const struct pad_config gpio_table_id0[] = {
+static const struct pad_config gpio_table[] = {
/* GPP_A00 : GPP_A00 ==> ESPI_SOC_IO0_R configured on reset, do not touch */
/* GPP_A01 : GPP_A01 ==> ESPI_SOC_IO1_R configured on reset, do not touch */
/* GPP_A02 : GPP_A02 ==> ESPI_SOC_IO2_R configured on reset, do not touch */
@@ -382,7 +382,7 @@
};
/* Early pad configuration in bootblock */
-static const struct pad_config early_gpio_table_id0[] = {
+static const struct pad_config early_gpio_table[] = {
/* GPP_B17 : [] ==> EN_WWAN_PWR */
PAD_CFG_GPO(GPP_B17, 1, DEEP),
/* GPP_B18 : [] ==> SOC_I2C_TPM_SDA */
@@ -416,22 +416,7 @@
PAD_CFG_GPI_GPIO_DRIVER_LOCK(GPP_H10, NONE, LOCK_CONFIG),
};
-/* Default/Minimal early pad configuration if we can't find board_id */
-static const struct pad_config default_early_gpio_table[] = {
- /* GPP_B18 : [] ==> SOC_I2C_TPM_SDA */
- PAD_CFG_NF(GPP_B18, NONE, DEEP, NF2),
- /* GPP_B19 : [] ==> SOC_I2C_TPM_SCL */
- PAD_CFG_NF(GPP_B19, NONE, DEEP, NF2),
- /* GPP_E03 : [] ==> GSC_SOC_INT_ODL */
- PAD_CFG_GPI_APIC(GPP_E03, NONE, PLTRST, LEVEL, INVERT),
-
- /* GPP_H08 : [] ==> UART_DBG_TX_SOC_RX_R */
- PAD_CFG_NF(GPP_H08, NONE, DEEP, NF1),
- /* GPP_H09 : [] ==> UART_SOC_TX_DBG_RX_R */
- PAD_CFG_NF(GPP_H09, NONE, DEEP, NF1),
-};
-
-static const struct pad_config romstage_gpio_table_id0[] = {
+static const struct pad_config romstage_gpio_table[] = {
/* GPP_B11 : [] ==> EN_FP_PWR */
PAD_CFG_GPO(GPP_B11, 0, DEEP),
/* A20 : [] ==> SSD_PERST_L */
@@ -444,52 +429,21 @@
const struct pad_config *variant_gpio_table(size_t *num)
{
- const uint32_t id = board_id();
- switch (id) {
- case 0:
- *num = ARRAY_SIZE(gpio_table_id0);
- return gpio_table_id0;
-
- case BOARD_ID_UNKNOWN:
- default:
- printk(BIOS_ERR, "board_id() not found. Unable to load gpio table.\n");
- *num = 0;
- return NULL;
- }
+ *num = ARRAY_SIZE(gpio_table);
+ return gpio_table;
}
const struct pad_config *variant_early_gpio_table(size_t *num)
{
- const uint32_t id = board_id();
- switch (id) {
- case 0:
- *num = ARRAY_SIZE(early_gpio_table_id0);
- return early_gpio_table_id0;
-
- case BOARD_ID_UNKNOWN:
- default:
- printk(BIOS_ERR, "board_id() not found. Loading default early gpio table.\n");
- *num = ARRAY_SIZE(default_early_gpio_table);
- return default_early_gpio_table;
- }
+ *num = ARRAY_SIZE(early_gpio_table);
+ return early_gpio_table;
}
/* Create the stub for romstage gpio, typically use for power sequence */
const struct pad_config *variant_romstage_gpio_table(size_t *num)
{
- const uint32_t id = board_id();
- switch (id) {
- case 0:
- *num = ARRAY_SIZE(romstage_gpio_table_id0);
- return romstage_gpio_table_id0;
-
- case BOARD_ID_UNKNOWN:
- default:
- printk(BIOS_ERR,
- "board_id() not found. Unable to load romstage gpio table.\n");
- *num = 0;
- return NULL;
- }
+ *num = ARRAY_SIZE(romstage_gpio_table);
+ return romstage_gpio_table;
}
static const struct cros_gpio cros_gpios[] = {