ec/google/chromeec: Add new host command, EC_CMD_GET_PD_PORT_CAPS
The new host command provides these static capabilities of each USB-PD port:
1) Port number
2) Power role: source, sink, dual
3) Try-power role: none, sink, source
4) Data role: dfp, ufp, dual
5) Port location: these come from power_manager
BUG=b:146506369
BRANCH=none
TEST=compiles
Change-Id: I923e4b637a2f41ce173d378ba5030f1ae8c22222
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h
index 86bd4f6..7b5a067 100644
--- a/src/ec/google/chromeec/ec_commands.h
+++ b/src/ec/google/chromeec/ec_commands.h
@@ -5853,6 +5853,74 @@
#define EC_CMD_REBOOT_AP_ON_G3 0x0127
/*****************************************************************************/
+/* Get PD port capabilities
+ *
+ * Returns the following static *capabilities* of the given port:
+ * 1) Power role: source, sink, or dual. It is not anticipated that
+ * future CrOS devices would ever be only a source, so the options are
+ * sink or dual.
+ * 2) Try-power role: source, sink, or none (practically speaking, I don't
+ * believe any CrOS device would support Try.SNK, so this would be source
+ * or none).
+ * 3) Data role: dfp, ufp, or dual. This will probably only be DFP or dual
+ * for CrOS devices.
+ */
+#define EC_CMD_GET_PD_PORT_CAPS 0x0128
+
+enum ec_pd_power_role_caps {
+ EC_PD_POWER_ROLE_SOURCE = 0,
+ EC_PD_POWER_ROLE_SINK = 1,
+ EC_PD_POWER_ROLE_DUAL = 2,
+};
+
+enum ec_pd_try_power_role_caps {
+ EC_PD_TRY_POWER_ROLE_NONE = 0,
+ EC_PD_TRY_POWER_ROLE_SINK = 1,
+ EC_PD_TRY_POWER_ROLE_SOURCE = 2,
+};
+
+enum ec_pd_data_role_caps {
+ EC_PD_DATA_ROLE_DFP = 0,
+ EC_PD_DATA_ROLE_UFP = 1,
+ EC_PD_DATA_ROLE_DUAL = 2,
+};
+
+/* From: power_manager/power_supply_properties.proto */
+enum ec_pd_port_location {
+ /* The location of the port is unknown, or there's only one port. */
+ EC_PD_PORT_LOCATION_UNKNOWN = 0,
+
+ /*
+ * Various positions on the device. The first word describes the side of
+ * the device where the port is located while the second clarifies the
+ * position. For example, LEFT_BACK means the farthest-back port on the
+ * left side, while BACK_LEFT means the leftmost port on the back of the
+ * device.
+ */
+ EC_PD_PORT_LOCATION_LEFT = 1,
+ EC_PD_PORT_LOCATION_RIGHT = 2,
+ EC_PD_PORT_LOCATION_BACK = 3,
+ EC_PD_PORT_LOCATION_FRONT = 4,
+ EC_PD_PORT_LOCATION_LEFT_FRONT = 5,
+ EC_PD_PORT_LOCATION_LEFT_BACK = 6,
+ EC_PD_PORT_LOCATION_RIGHT_FRONT = 7,
+ EC_PD_PORT_LOCATION_RIGHT_BACK = 8,
+ EC_PD_PORT_LOCATION_BACK_LEFT = 9,
+ EC_PD_PORT_LOCATION_BACK_RIGHT = 10,
+};
+
+struct ec_params_get_pd_port_caps {
+ uint8_t port; /* Which port to interrogate */
+} __ec_align1;
+
+struct ec_response_get_pd_port_caps {
+ uint8_t pd_power_role_cap; /* enum ec_pd_power_role_caps */
+ uint8_t pd_try_power_role_cap; /* enum ec_pd_try_power_role_caps */
+ uint8_t pd_data_role_cap; /* enum ec_pd_data_role_caps */
+ uint8_t pd_port_location; /* enum ec_pd_port_location */
+} __ec_align1;
+
+/*****************************************************************************/
/* The command range 0x200-0x2FF is reserved for Rotor. */
/*****************************************************************************/