google/butterfly: Drop MRC.bin in favor of native raminit
I thought this wasn't going to work, and observing the timC detection
failure of early tests, I was getting somewhat discouraged; however,
this works. I've tried it with all possible permutations of the
following memory modules:
* 2 GiB single-rank DDR3-1600
* 4 GiB single-rank DDR3-1600
* 4 GiB dual-rank DDR3-1600
I did notice a limited number of memtest errors during one of the
runs, but they were in an address range that is otherwise marked as
reserved. I wrote that off as "maybe something was doing MMIO there
just when memtest was poking the address range". I was not able to
reproduce that error.
Change-Id: Ibd52e1d52fc8d900591d6a488f9a5b4d1e5e4fd3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8477
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
diff --git a/src/mainboard/google/butterfly/romstage.c b/src/mainboard/google/butterfly/romstage.c
index b1172950..7f9ab60 100644
--- a/src/mainboard/google/butterfly/romstage.c
+++ b/src/mainboard/google/butterfly/romstage.c
@@ -32,20 +32,18 @@
#include <cbmem.h>
#include <console/console.h>
#include <northbridge/intel/sandybridge/sandybridge.h>
-#include <northbridge/intel/sandybridge/raminit.h>
+#include <northbridge/intel/sandybridge/raminit_native.h>
#include <southbridge/intel/bd82x6x/pch.h>
#include <southbridge/intel/bd82x6x/gpio.h>
#include <arch/cpu.h>
-#include <cpu/x86/bist.h>
#include <cpu/x86/msr.h>
#include <halt.h>
-#include "gpio.h"
#if CONFIG_CHROMEOS
#include <vendorcode/google/chromeos/chromeos.h>
#endif
#include <cbfs.h>
-static void pch_enable_lpc(void)
+void pch_enable_lpc(void)
{
/* EC Decode Range Port60/64 and Port62/66 */
/* Enable EC and PS/2 Keyboard/Mouse*/
@@ -59,7 +57,7 @@
}
-static void rcba_config(void)
+void rcba_config(void)
{
u32 reg32;
@@ -73,134 +71,25 @@
RCBA32(FD) = reg32;
}
-#include <cpu/intel/romstage.h>
-void main(unsigned long bist)
-{
- int boot_mode = 0;
- int cbmem_was_initted;
+const struct southbridge_usb_port mainboard_usb_ports[] = {
+ /* enabled usb oc pin length */
+ { 1, 0, 0x0040 }, /* P0: Right USB 3.0 #1 (no OC) */
+ { 1, 0, 0x0040 }, /* P1: Right USB 3.0 #2 (no OC) */
+ { 1, 0, 0x0040 }, /* P2: Camera (no OC) */
+ { 0, 0, 0x0000 }, /* P3: Empty */
+ { 0, 0, 0x0000 }, /* P4: Empty */
+ { 0, 0, 0x0000 }, /* P5: Empty */
+ { 0, 0, 0x0000 }, /* P6: Empty */
+ { 0, 0, 0x0000 }, /* P7: Empty */
+ { 0, 4, 0x0000 }, /* P8: Empty */
+ { 1, 4, 0x0080 }, /* P9: Left USB 1 (no OC) */
+ { 1, 4, 0x0040 }, /* P10: Mini PCIe - WLAN / BT (no OC) */
+ { 0, 4, 0x0000 }, /* P11: Empty */
+ { 0, 4, 0x0000 }, /* P12: Empty */
+ { 0, 4, 0x0000 }, /* P13: Empty */
+};
- struct pei_data pei_data = {
- .pei_version = PEI_VERSION,
- .mchbar = (uintptr_t)DEFAULT_MCHBAR,
- .dmibar = (uintptr_t)DEFAULT_DMIBAR,
- .epbar = DEFAULT_EPBAR,
- .pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
- .smbusbar = SMBUS_IO_BASE,
- .wdbbar = 0x4000000,
- .wdbsize = 0x1000,
- .hpet_address = CONFIG_HPET_ADDRESS,
- .rcba = (uintptr_t)DEFAULT_RCBABASE,
- .pmbase = DEFAULT_PMBASE,
- .gpiobase = DEFAULT_GPIOBASE,
- .thermalbase = 0xfed08000,
- .system_type = 0, // 0 Mobile, 1 Desktop/Server
- .tseg_size = CONFIG_SMM_TSEG_SIZE,
- .spd_addresses = { 0xA0, 0x00,0xA4,0x00 },
- .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
- .ec_present = 1,
- .ddr3lv_support = 0,
- // 0 = leave channel enabled
- // 1 = disable dimm 0 on channel
- // 2 = disable dimm 1 on channel
- // 3 = disable dimm 0+1 on channel
- .dimm_channel0_disabled = 2,
- .dimm_channel1_disabled = 2,
- .max_ddr3_freq = 1600,
- .usb_port_config = {
- /* enabled usb oc pin length */
- { 1, 0, 0x0040 }, /* P0: Right USB 3.0 #1 (no OC) */
- { 1, 0, 0x0040 }, /* P1: Right USB 3.0 #2 (no OC) */
- { 1, 0, 0x0040 }, /* P2: Camera (no OC) */
- { 0, 0, 0x0000 }, /* P3: Empty */
- { 0, 0, 0x0000 }, /* P4: Empty */
- { 0, 0, 0x0000 }, /* P5: Empty */
- { 0, 0, 0x0000 }, /* P6: Empty */
- { 0, 0, 0x0000 }, /* P7: Empty */
- { 0, 4, 0x0000 }, /* P8: Empty */
- { 1, 4, 0x0080 }, /* P9: Left USB 1 (no OC) */
- { 1, 4, 0x0040 }, /* P10: Mini PCIe - WLAN / BT (no OC) */
- { 0, 4, 0x0000 }, /* P11: Empty */
- { 0, 4, 0x0000 }, /* P12: Empty */
- { 0, 4, 0x0000 }, /* P13: Empty */
- },
- .ddr_refresh_rate_config = 2, /* Force double refresh rate */
- };
-
- timestamp_init(get_initial_timestamp());
- timestamp_add_now(TS_START_ROMSTAGE);
-
- if (bist == 0)
- enable_lapic();
-
- pch_enable_lpc();
-
- /* Enable GPIOs */
- pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1);
- pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10);
- setup_pch_gpios(&butterfly_gpio_map);
-
- /* Initialize console device(s) */
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- printk(BIOS_DEBUG, "soft reset detected\n");
- boot_mode = 1;
-
- /* System is not happy after keyboard reset... */
- printk(BIOS_DEBUG, "Issuing CF9 warm reset\n");
- outb(0x6, 0xcf9);
- halt();
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- sandybridge_early_initialization(SANDYBRIDGE_MOBILE);
- printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n");
-
- boot_mode = southbridge_detect_s3_resume() ? 2 : 0;
-
- post_code(0x38);
- /* Enable SPD ROMs and DDR-III DRAM */
- enable_smbus();
-
- /* Prepare USB controller early in S3 resume */
- if (boot_mode == 2)
- enable_usb_bar();
-
- post_code(0x39);
-
- post_code(0x3a);
- pei_data.boot_mode = boot_mode;
- timestamp_add_now(TS_BEFORE_INITRAM);
- sdram_initialize(&pei_data);
-
- timestamp_add_now(TS_AFTER_INITRAM);
- post_code(0x3c);
-
- rcba_config();
- post_code(0x3d);
-
- quick_ram_check();
- post_code(0x3e);
-
- cbmem_was_initted = !cbmem_recovery(boot_mode==2);
- if (boot_mode!=2)
- save_mrc_data(&pei_data);
-
- if (boot_mode==2 && !cbmem_was_initted) {
- /* Failed S3 resume, reset to come up cleanly */
- outb(0x6, 0xcf9);
- halt();
- }
- northbridge_romstage_finalize(boot_mode==2);
-
- post_code(0x3f);
-#if CONFIG_CHROMEOS
- init_chromeos(boot_mode);
-#endif
- timestamp_add_now(TS_END_ROMSTAGE);
+void mainboard_get_spd(spd_raw_data *spd) {
+ read_spd(&spd[0], 0x50);
+ read_spd(&spd[2], 0x52);
}