libpayload: Increase accuracy of timeout period for media init.
When bringing up media, we claim to wait for up to 30 seconds for a
device to respond to our TEST_UNIT_READY command. Actually, we can wait
far longer because we do not take into account execution delay.
To improve timeout accuracy, make use of gettimeofday(), which calculates
time based upon a CPU counter. This improves the user experience
slightly when certain non-working USB devices are used.
Change-Id: Id9605ecfc0a522d7a0b039fd8eac541232605082
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169208
Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 1d3d535db83ff478c512e37f37015b43927b3efc)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6646
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
diff --git a/payloads/libpayload/drivers/usb/usbmsc.c b/payloads/libpayload/drivers/usb/usbmsc.c
index 0259b8d..f68bee5 100644
--- a/payloads/libpayload/drivers/usb/usbmsc.c
+++ b/payloads/libpayload/drivers/usb/usbmsc.c
@@ -537,22 +537,26 @@
usb_msc_test_unit_ready (usbdev_t *dev)
{
int i;
+ time_t start_time_secs;
+ struct timeval tv;
/* SCSI/ATA specs say we have to wait up to 30s. Ugh */
- const int timeout = 30 * 10;
+ const int timeout_secs = 30;
usb_debug (" Waiting for device to become ready...");
/* Initially mark the device ready. */
usb_msc_mark_ready (dev);
+ gettimeofday (&tv, NULL);
+ start_time_secs = tv.tv_sec;
- for (i = 0; i < timeout; i++) {
+ while (tv.tv_sec - start_time_secs < timeout_secs) {
switch (test_unit_ready (dev)) {
case MSC_COMMAND_OK:
break;
case MSC_COMMAND_FAIL:
mdelay (100);
- if (!(timeout % 10))
- usb_debug (".");
+ usb_debug (".");
+ gettimeofday (&tv, NULL);
continue;
default:
usb_debug ("detached. Device not ready.\n");
@@ -561,7 +565,7 @@
}
break;
}
- if (i >= timeout) {
+ if (!(tv.tv_sec - start_time_secs < timeout_secs)) {
usb_debug ("timeout. Device not ready.\n");
usb_msc_mark_not_ready (dev);
}