diff --git a/src/drivers/i2c/cs35l53/cs35l53.c b/src/drivers/i2c/cs35l53/cs35l53.c
new file mode 100644
index 0000000..1909bef
--- /dev/null
+++ b/src/drivers/i2c/cs35l53/cs35l53.c
@@ -0,0 +1,147 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <acpi/acpi.h>
+#include <acpi/acpi_device.h>
+#include <acpi/acpigen.h>
+#include <console/console.h>
+#include <device/i2c_simple.h>
+#include <device/device.h>
+#include <device/path.h>
+
+#include "chip.h"
+
+#define CS35L53_ACPI_HID	"CSC3541"
+
+static void cs35l53_fill_ssdt(const struct device *dev)
+{
+	struct drivers_i2c_cs35l53_config *config = dev->chip_info;
+	const char *scope = acpi_device_scope(dev);
+	const char *path = acpi_device_path(dev);
+	struct acpi_i2c i2c = {
+		.address = dev->path.i2c.device,
+		.mode_10bit = dev->path.i2c.mode_10bit,
+		.speed = config->bus_speed ? : I2C_SPEED_FAST,
+		.resource = scope,
+	};
+	struct acpi_dp *dsd;
+	int gpio_index = 0;
+
+	if (!scope)
+		return;
+
+	/* Device */
+	acpigen_write_scope(scope);
+	acpigen_write_device(acpi_device_name(dev));
+	acpigen_write_name_string("_HID", CS35L53_ACPI_HID);
+	acpigen_write_name_integer("_UID", 0);
+	acpigen_write_name_string("_DDN", dev->chip_ops->name);
+	acpigen_write_name_string("_SUB", config->sub);
+	acpigen_write_STA(acpi_device_status(dev));
+
+	/* Resources */
+	acpigen_write_name("_CRS");
+	acpigen_write_resourcetemplate_header();
+	acpi_device_write_i2c(&i2c);
+	/* Use either Interrupt() or GpioInt() */
+	if (config->irq_gpio.pin_count)
+		acpi_device_write_gpio(&config->irq_gpio);
+	else
+		acpi_device_write_interrupt(&config->irq);
+
+	/* for cs35l53 reset gpio */
+	if (config->reset_gpio.pin_count)
+		acpi_device_write_gpio(&config->reset_gpio);
+
+	acpigen_write_resourcetemplate_footer();
+
+	/* Add Child Device Properties */
+	dsd = acpi_dp_new_table("_DSD");
+	if (config->irq_gpio.pin_count)
+		acpi_dp_add_gpio(dsd, "irq-gpios", path,
+			 gpio_index++,  /* Index = 0 */
+			 0,  /* Pin = 0 (There is a single pin in the GPIO resource). */
+			 config->irq_gpio.active_low);
+	if (config->reset_gpio.pin_count)
+		acpi_dp_add_gpio(dsd, "reset-gpios", path,
+			 gpio_index++,  /* Index = 0 or 1 (if irq gpio is written). */
+			 0,  /* Pin = 0 (There is a single pin in the GPIO resource). */
+			 config->reset_gpio.active_low);
+
+	acpi_dp_add_integer(dsd, "cirrus,boost-type", config->boost_type);
+
+	switch (config->boost_type) {
+	case INTERNAL_BOOST:
+		if ((config->boost_peak_milliamp > 4500) ||
+		(config->boost_peak_milliamp < 1600) ||
+		(config->boost_peak_milliamp % 50)) {
+			printk(BIOS_ERR,
+			       "%s: Incorrect boost_peak_milliamp(%d). Using default of 4500 mA\n",
+				__func__, config->boost_peak_milliamp);
+			config->boost_peak_milliamp = 4500;
+		}
+		acpi_dp_add_integer(dsd, "cirrus,boost-peak-milliamp",
+				    config->boost_peak_milliamp);
+		acpi_dp_add_integer(dsd, "cirrus,boost-ind-nanohenry",
+				    config->boost_ind_nanohenry);
+		acpi_dp_add_integer(dsd, "cirrus,boost-cap-microfarad",
+				    config->boost_cap_microfarad);
+		break;
+	case EXTERNAL_BOOST:
+		config->gpio1_output_enable = true;
+		config->gpio1_src_select = GPIO1_SRC_GPIO;
+		break;
+	default:
+		break;
+	}
+
+	acpi_dp_add_integer(dsd, "cirrus,asp-sdout-hiz", config->asp_sdout_hiz);
+	acpi_dp_add_integer(dsd, "cirrus,gpio1-polarity-invert",
+				config->gpio1_polarity_invert);
+	acpi_dp_add_integer(dsd, "cirrus,gpio1-output-enable",
+				config->gpio1_output_enable);
+	acpi_dp_add_integer(dsd, "cirrus,gpio1-src-select", config->gpio1_src_select);
+	acpi_dp_add_integer(dsd, "cirrus,gpio2-polarity-invert",
+				config->gpio2_polarity_invert);
+	acpi_dp_add_integer(dsd, "cirrus,gpio2-output-enable",
+				config->gpio2_output_enable);
+	acpi_dp_add_integer(dsd, "cirrus,gpio2-src-select", config->gpio2_src_select);
+
+	/* Write Device Property Hierarchy */
+	acpi_dp_write(dsd);
+
+	acpigen_pop_len(); /* Device */
+	acpigen_pop_len(); /* Scope */
+
+	printk(BIOS_INFO, "%s: %s address 0%xh irq %d\n",
+	       acpi_device_path(dev), dev->chip_ops->name,
+	       dev->path.i2c.device, config->irq.pin);
+}
+
+static const char *cs35l53_acpi_name(const struct device *dev)
+{
+	struct drivers_i2c_cs35l53_config *config = dev->chip_info;
+	static char name[ACPI_NAME_BUFFER_SIZE];
+
+	if (config->name)
+		return config->name;
+
+	snprintf(name, sizeof(name), "D%03.3X", dev->path.i2c.device);
+	return name;
+}
+
+static struct device_operations cs35l53_ops = {
+	.read_resources		= noop_read_resources,
+	.set_resources		= noop_set_resources,
+	.acpi_name		= cs35l53_acpi_name,
+	.acpi_fill_ssdt		= cs35l53_fill_ssdt,
+};
+
+static void cs35l53_enable(struct device *dev)
+{
+	dev->ops = &cs35l53_ops;
+}
+
+struct chip_operations drivers_i2c_cs35l53_ops = {
+	CHIP_NAME("Cirrus Logic CS35L53 Audio Codec")
+	.enable_dev = cs35l53_enable
+};