AMD S3: Leverage the public SPI routine
Remove the old, unflexible code for storing S3 data in SPI flash.
Refer to flashrom. Tested on Parmer.
Change-Id: I60a10476befb4afab2b4241f01a988f4a8bb22cd
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1920
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marcj303@gmail.com>
diff --git a/src/southbridge/amd/cimx/sb800/spi.c b/src/southbridge/amd/cimx/sb800/spi.c
index e1c2ecb..3b54490 100644
--- a/src/southbridge/amd/cimx/sb800/spi.c
+++ b/src/southbridge/amd/cimx/sb800/spi.c
@@ -16,201 +16,107 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <console/console.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
#include <arch/io.h>
+#include <spi.h>
#include <device/device.h>
-#include "SBPLATFORM.h"
+#include <device/pci.h>
+#include <device/pci_ops.h>
+static u32 spibar;
-void execute_command(volatile u8 * spi_address)
+static void reset_internal_fifo_pointer(void)
{
- *(spi_address + 2) |= 1;
-}
-
-void wait4command_complete(volatile u8 * spi_address)
-{
- while (*(spi_address + 2) & 1)
- printk(BIOS_DEBUG, "wait4CommandComplete\n");
-}
-
-void reset_internal_fifo_pointer(volatile u8 * spi_address)
-{
- u8 val;
-
do {
- *(spi_address + 2) |= 0x10;
- val = *(spi_address + 0xd);
- } while (val & 0x7);
+ write8(spibar + 2, read8(spibar + 2) | 0x10);
+ } while (read8(spibar + 0xD) & 0x7);
}
-u8 read_spi_status(volatile u8 * spi_address)
+static void execute_command(void)
{
- u8 val;
- *spi_address = 0x05;
- *(spi_address + 1) = 0x11;
- reset_internal_fifo_pointer(spi_address);
- *(spi_address + 0xC) = 0x0; /* dummy */
- reset_internal_fifo_pointer(spi_address);
- execute_command(spi_address);
- wait4command_complete(spi_address);
- reset_internal_fifo_pointer(spi_address);
- val = *(spi_address + 0xC);
- val = *(spi_address + 0xC);
- return val;
+ write8(spibar + 2, read8(spibar + 2) | 1);
+
+ while ((read8(spibar + 2) & 1) && (read8(spibar+3) & 0x80));
}
-void wait4flashpart_ready(volatile u8 * spi_address)
+void spi_init()
{
- while (read_spi_status(spi_address) & 1) ;
+ device_t dev;
+
+ dev = dev_find_slot(0, PCI_DEVFN(0x14, 3));
+ spibar = pci_read_config32(dev, 0xA0) & ~0x1F;
}
-void write_spi_status(volatile u8 * spi_address, u8 status)
+int spi_xfer(struct spi_slave *slave, const void *dout,
+ unsigned int bitsout, void *din, unsigned int bitsin)
{
- *spi_address = 0x50; /* EWSR */
- *(spi_address + 1) = 0; /* RxByte=TxByte=0 */
- execute_command(spi_address);
- wait4command_complete(spi_address);
+ /* First byte is cmd which can not being sent through FIFO. */
+ u8 cmd = *(u8 *)dout++;
+ u8 readoffby1;
+ u8 readwrite;
+ u8 bytesout, bytesin;
+ u8 count;
- *spi_address = 0x01; /* WRSR */
- *(spi_address + 1) = 0x01;
- reset_internal_fifo_pointer(spi_address);
- *(spi_address + 0xC) = status;
- reset_internal_fifo_pointer(spi_address);
- execute_command(spi_address);
- wait4command_complete(spi_address);
- wait4flashpart_ready(spi_address);
+ bitsout -= 8;
+ bytesout = bitsout / 8;
+ bytesin = bitsin / 8;
- read_spi_status(spi_address);
-}
+ readoffby1 = bytesout ? 0 : 1;
-void read_spi_id(volatile u8 * spi_address)
-{
- u8 mid = 0, did = 0;
- *spi_address = 0x90;
- *(spi_address + 1) = 0x23; /* RxByte=2, TxByte=3 */
- reset_internal_fifo_pointer(spi_address);
- *(spi_address + 0xC) = 0;
- *(spi_address + 0xC) = 0;
- *(spi_address + 0xC) = 0;
- reset_internal_fifo_pointer(spi_address);
- execute_command(spi_address);
- wait4command_complete(spi_address);
- reset_internal_fifo_pointer(spi_address);
- mid = *(spi_address + 0xC);
- printk(BIOS_DEBUG, "mid=%x, did=%x\n", mid, did);
- mid = *(spi_address + 0xC);
- printk(BIOS_DEBUG, "mid=%x, did=%x\n", mid, did);
- mid = *(spi_address + 0xC);
- printk(BIOS_DEBUG, "mid=%x, did=%x\n", mid, did);
+ readwrite = (bytesin + readoffby1) << 4 | bytesout;
+ write8(spibar + 1, readwrite);
+ write8(spibar + 0, cmd);
- mid = *(spi_address + 0xC);
- did = *(spi_address + 0xC);
- printk(BIOS_DEBUG, "mid=%x, did=%x\n", mid, did);
-}
-
-void spi_write_enable(volatile u8 * spi_address)
-{
- *spi_address = 0x06; /* Write Enable */
- *(spi_address + 1) = 0x0; /* RxByte=0, TxByte=0 */
- execute_command(spi_address);
- wait4command_complete(spi_address);
-}
-void spi_write_disable(volatile u8 * spi_address)
-{
- *spi_address = 0x04; /* Write Enable */
- *(spi_address + 1) = 0x0; /* RxByte=0, TxByte=0 */
- execute_command(spi_address);
- wait4command_complete(spi_address);
-}
-
-void sector_erase_spi(volatile u8 * spi_address, u32 address)
-{
- spi_write_enable(spi_address);
- *spi_address = 0x20;
- *(spi_address + 1) = 0x03; /* RxByte=0, TxByte=3 */
-
- reset_internal_fifo_pointer(spi_address);
- *(spi_address + 0xC) = (address >> 16) & 0xFF;
- *(spi_address + 0xC) = (address >> 8) & 0xFF;
- *(spi_address + 0xC) = (address >> 0) & 0xFF;
- reset_internal_fifo_pointer(spi_address);
- execute_command(spi_address);
- wait4command_complete(spi_address);
- wait4flashpart_ready(spi_address);
-}
-
-void chip_erase_spi(volatile u8 * spi_address)
-{
- spi_write_enable(spi_address);
- *spi_address = 0xC7;
- *(spi_address + 1) = 0x00;
- execute_command(spi_address);
- wait4command_complete(spi_address);
- wait4flashpart_ready(spi_address);
-}
-
-void byte_program(volatile u8 * spi_address, u32 address, u32 data)
-{
- spi_write_enable(spi_address);
- *spi_address = 0x02;
- *(spi_address + 1) = 0x0 << 4 | 4;
- reset_internal_fifo_pointer(spi_address);
- *(spi_address + 0xC) = (address >> 16) & 0xFF;
- *(spi_address + 0xC) = (address >> 8) & 0xFF;
- *(spi_address + 0xC) = (address >> 0) & 0xFF;
- *(spi_address + 0xC) = data & 0xFF;
- reset_internal_fifo_pointer(spi_address);
- execute_command(spi_address);
- wait4command_complete(spi_address);
- wait4flashpart_ready(spi_address);
-}
-
-void dword_noneAAI_program(volatile u8 * spi_address, u32 address, u32 data)
-{
- u8 i;
- /*
- * printk(BIOS_SPEW, "%s: addr=%x, data=%x\n", __func__, address, data);
- */
- for (i = 0; i < 4; i++) {
- spi_write_enable(spi_address);
- *spi_address = 0x02;
- *(spi_address + 1) = 0x0 << 4 | 4;
- reset_internal_fifo_pointer(spi_address);
- *(spi_address + 0xC) = (address >> 16) & 0xFF;
- *(spi_address + 0xC) = (address >> 8) & 0xFF;
- *(spi_address + 0xC) = (address >> 0) & 0xFF;
- *(spi_address + 0xC) = data & 0xFF;
- data >>= 8;
- address++;
- reset_internal_fifo_pointer(spi_address);
- execute_command(spi_address);
- wait4command_complete(spi_address);
- wait4flashpart_ready(spi_address);
+ reset_internal_fifo_pointer();
+ for (count = 0; count < bytesout; count++, dout++) {
+ write8(spibar + 0x0C, *(u8 *)dout);
}
+
+ reset_internal_fifo_pointer();
+ execute_command();
+
+ reset_internal_fifo_pointer();
+ /* Skip the bytes we sent. */
+ for (count = 0; count < bytesout; count++) {
+ cmd = read8(spibar + 0x0C);
+ }
+
+ reset_internal_fifo_pointer();
+ for (count = 0; count < bytesin; count++, din++) {
+ *(u8 *)din = read8(spibar + 0x0C);
+ }
+
+ return 0;
+}
+int spi_claim_bus(struct spi_slave *slave)
+{
+ return 0;
}
-void dword_program(volatile u8 * spi_address, u32 address, u32 data)
+void spi_release_bus(struct spi_slave *slave)
{
- spi_write_enable(spi_address);
- *spi_address = 0x02;
- *(spi_address + 1) = 0x0 << 4 | 7;
- reset_internal_fifo_pointer(spi_address);
- *(spi_address + 0xC) = (address >> 16) & 0xFF;
- *(spi_address + 0xC) = (address >> 8) & 0xFF;
- *(spi_address + 0xC) = (address >> 0) & 0xFF;
- *(spi_address + 0xC) = data & 0xFF;
- *(spi_address + 0xC) = (data >> 8) & 0xFF;
- *(spi_address + 0xC) = (data >> 16) & 0xFF;
- *(spi_address + 0xC) = (data >> 24) & 0xFF;
- reset_internal_fifo_pointer(spi_address);
- execute_command(spi_address);
- wait4command_complete(spi_address);
- wait4flashpart_ready(spi_address);
}
-void direct_byte_program(volatile u8 * spi_address, volatile u32 * address, u32 data)
+void spi_cs_activate(struct spi_slave *slave)
{
- spi_write_enable(spi_address);
- *address = data;
- wait4flashpart_ready(spi_address);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct spi_slave *slave = malloc(sizeof(*slave));
+
+ if (!slave) {
+ return NULL;
+ }
+
+ memset(slave, 0, sizeof(*slave));
+
+ return slave;
}