mainboard: add avalue/eax-785 ITX mainboard
It's AM3 Socket, 880M + SB850 chipset, similar with advansus/a785e-i.
Onboard device UART, VGA, SATA, PCI Slot, 2 X16 PCIe slot, 4 X1 Pcie
slot, Lan, audio, PS2 keyboard/mouse and USB are verified.
Change-Id: I483363f5ff9fbfc5cda2f0521660751212f3e326
Signed-off-by: Kerry She <kerry.she@amd.com>
Signed-off-by: Kerry She <shekairui@gmail.com>
Reviewed-on: http://review.coreboot.org/208
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
diff --git a/src/mainboard/avalue/eax-785e/platform_cfg.h b/src/mainboard/avalue/eax-785e/platform_cfg.h
new file mode 100644
index 0000000..24dcae0
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/platform_cfg.h
@@ -0,0 +1,235 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#ifndef _EAX_785E_CFG_H_
+#define _EAX_785E_CFG_H_
+
+/**
+ * @def BIOS_SIZE_1M
+ * @def BIOS_SIZE_2M
+ * @def BIOS_SIZE_4M
+ * @def BIOS_SIZE_8M
+ */
+#define BIOS_SIZE_1M 0
+#define BIOS_SIZE_2M 1
+#define BIOS_SIZE_4M 3
+#define BIOS_SIZE_8M 7
+
+/* In SB800, default ROM size is 1M Bytes, if your platform ROM
+ * bigger than 1M you have to set the ROM size outside CIMx module and
+ * before AGESA module get call.
+ */
+#ifndef BIOS_SIZE
+#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1
+ #define BIOS_SIZE BIOS_SIZE_1M
+#elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1
+ #define BIOS_SIZE BIOS_SIZE_2M
+#elif CONFIG_COREBOOT_ROMSIZE_KB_4096 == 1
+ #define BIOS_SIZE BIOS_SIZE_4M
+#elif CONFIG_COREBOOT_ROMSIZE_KB_8192 == 1
+ #define BIOS_SIZE BIOS_SIZE_8M
+#endif
+#endif
+
+/**
+ * @def SPREAD_SPECTRUM
+ * @brief
+ * 0 - Disable Spread Spectrum function
+ * 1 - Enable Spread Spectrum function
+ */
+#define SPREAD_SPECTRUM 0
+
+/**
+ * @def SB_HPET_TIMER
+ * @breif
+ * 0 - Disable hpet
+ * 1 - Enable hpet
+ */
+#define HPET_TIMER 1
+
+/**
+ * @def USB_CONFIG
+ * @brief bit[0-6] used to control USB
+ * 0 - Disable
+ * 1 - Enable
+ * Usb Ohci1 Contoller (Bus 0 Dev 18 Func0) is define at BIT0
+ * Usb Ehci1 Contoller (Bus 0 Dev 18 Func2) is define at BIT1
+ * Usb Ohci2 Contoller (Bus 0 Dev 19 Func0) is define at BIT2
+ * Usb Ehci2 Contoller (Bus 0 Dev 19 Func2) is define at BIT3
+ * Usb Ohci3 Contoller (Bus 0 Dev 22 Func0) is define at BIT4
+ * Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5
+ * Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6
+ */
+#define USB_CONFIG 0x7F
+
+/**
+ * @def PCI_CLOCK_CTRL
+ * @breif bit[0-4] used for PCI Slots Clock Control,
+ * 0 - disable
+ * 1 - enable
+ * PCI SLOT 0 define at BIT0
+ * PCI SLOT 1 define at BIT1
+ * PCI SLOT 2 define at BIT2
+ * PCI SLOT 3 define at BIT3
+ * PCI SLOT 4 define at BIT4
+ */
+#define PCI_CLOCK_CTRL 0x1F
+
+/**
+ * @def SATA_CONTROLLER
+ * @breif INCHIP Sata Controller
+ */
+#define SATA_CONTROLLER CIMX_OPTION_ENABLED
+
+/**
+ * @def SATA_MODE
+ * @breif INCHIP Sata Controller Mode
+ * NOTE: DO NOT ALLOW SATA & IDE use same mode
+ */
+#define SATA_MODE NATIVE_IDE_MODE
+
+/**
+ * @breif INCHIP Sata IDE Controller Mode
+ */
+#define IDE_LEGACY_MODE 0
+#define IDE_NATIVE_MODE 1
+
+/**
+ * @def SATA_IDE_MODE
+ * @breif INCHIP Sata IDE Controller Mode
+ * NOTE: DO NOT ALLOW SATA & IDE use same mode
+ */
+#define SATA_IDE_MODE IDE_LEGACY_MODE
+
+/**
+ * @def EXTERNAL_CLOCK
+ * @brief 00/10: Reference clock from crystal oscillator via
+ * PAD_XTALI and PAD_XTALO
+ *
+ * @def INTERNAL_CLOCK
+ * @brief 01/11: Reference clock from internal clock through
+ * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL
+ */
+#define EXTERNAL_CLOCK 0x00
+#define INTERNAL_CLOCK 0x01
+
+/* NOTE: inagua have to using internal clock,
+ * otherwise can not detect sata drive
+ */
+#define SATA_CLOCK_SOURCE INTERNAL_CLOCK
+
+/**
+ * @def SATA_PORT_MULT_CAP_RESERVED
+ * @brief 1 ON, 0 0FF
+ */
+#define SATA_PORT_MULT_CAP_RESERVED 1
+
+
+/**
+ * @def AZALIA_AUTO
+ * @brief Detect Azalia controller automatically.
+ *
+ * @def AZALIA_DISABLE
+ * @brief Disable Azalia controller.
+
+ * @def AZALIA_ENABLE
+ * @brief Enable Azalia controller.
+ */
+#define AZALIA_AUTO 0
+#define AZALIA_DISABLE 1
+#define AZALIA_ENABLE 2
+
+/**
+ * @breif INCHIP HDA controller
+ */
+#define AZALIA_CONTROLLER AZALIA_AUTO
+
+/**
+ * @def AZALIA_PIN_CONFIG
+ * @brief
+ * 0 - disable
+ * 1 - enable
+ */
+#define AZALIA_PIN_CONFIG 1
+
+/**
+ * @def AZALIA_SDIN_PIN
+ * @brief
+ * SDIN0 is define at BIT0 & BIT1
+ * 00 - GPIO PIN
+ * 01 - Reserved
+ * 10 - As a Azalia SDIN pin
+ * SDIN1 is define at BIT2 & BIT3
+ * SDIN2 is define at BIT4 & BIT5
+ * SDIN3 is define at BIT6 & BIT7
+ */
+//#define AZALIA_SDIN_PIN 0xAA
+#define AZALIA_SDIN_PIN 0x2A
+
+/**
+ * @def GPP_CONTROLLER
+ */
+#define GPP_CONTROLLER CIMX_OPTION_ENABLED
+
+/**
+ * @def GPP_CFGMODE
+ * @brief GPP Link Configuration
+ * four possible configuration:
+ * GPP_CFGMODE_X4000
+ * GPP_CFGMODE_X2200
+ * GPP_CFGMODE_X2110
+ * GPP_CFGMODE_X1111
+ */
+#define GPP_CFGMODE GPP_CFGMODE_X1111
+
+/**
+ * @def NB_SB_GEN2
+ * 0 - Disable
+ * 1 - Enable
+ */
+#define NB_SB_GEN2 TRUE
+
+/**
+ * @def SB_GEN2
+ * 0 - Disable
+ * 1 - Enable
+ */
+#define SB_GPP_GEN2 TRUE
+
+/**
+ * @def SB_GPP_UNHIDE_PORTS
+ * TRUE - ports visable always, even port empty
+ * FALSE - ports invisable if port empty
+ */
+#define SB_GPP_UNHIDE_PORTS FALSE
+
+/**
+ * @def GEC_CONFIG
+ * 0 - Enable
+ * 1 - Disable
+ */
+#define GEC_CONFIG 0
+
+/**
+ * @def SIO_HWM_BASE_ADDRESS Super IO HWM base address
+ */
+#define SIO_HWM_BASE_ADDRESS 0x290
+
+#endif