|author||Duncan Laurie <email@example.com>||Wed Mar 18 12:19:14 2020 -0700|
|committer||Patrick Georgi <firstname.lastname@example.org>||Fri May 01 06:11:42 2020 +0000|
lp/drivers/usb: Add quirk for QEMU XHCI root hub The QEMU XHCI driver does not implement the Port Change Detect bit in the USBSTS register. As a result no devices are attached without looking at each port individually. Detect this as a quirk based on the QEMU XHCI controller PCI ID, and apply it to the root hub quirk list so it can get used by the generic hub driver to skip this check. With this change an attached USB mass storage device is detected and able to boot when supplied to qemu: -drive if=none,id=usbmsc,format=raw,file=/tmp/disk.img -device qemu-xhci,id-xhci -device usb-storage,bus=xhci.0,drive=usbmsc Change-Id: I6689cb1dbb24c93d45f5c5ef040b713925d07588 Signed-off-by: Duncan Laurie <email@example.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39839 Reviewed-by: Angel Pons <firstname.lastname@example.org> Reviewed-by: Nico Huber <email@example.com> Tested-by: build bot (Jenkins) <firstname.lastname@example.org>
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
ANY_TOOLCHAINKconfig option if you're feeling lucky (no support in this case).
Please consult https://www.coreboot.org/Build_HOWTO for details.
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.