Add IOAPIC support for Intel 82371EB and fixup SMP on ASUS P2B-D.
- Add enable_intel_82093aa_ioapic() which enables IOAPIC usage in the
Intel 82371EB southbridge (sets the proper chip-select) and sets an
IOAPIC ID.
- We only call enable_intel_82093aa_ioapic() if a board does "select IOAPIC"
as on 82371EB-based boards the IOAPIC is an external chip (not integrated
in the southbridge) and it's only populated on multi-CPU boards.
That is, we cannot unconditionally enable it, only on SMP-capable boards.
- Due to the reason explained above, remove "select IOAPIC" from
src/southbridge/intel/i82371eb/Kconfig, and add it to
src/mainboard/asus/p2b-d/Kconfig.
- Also set CONFIG_MAX_PHYSICAL_CPUS to 2 on ASUS P2B-D. There are two
CPU sockets (Slot 1) and each CPU can only have one core, multi-core CPUs
didn't exist in that era (CONFIG_MAX_CPUS was set to 2 already).
- Drop useless/duplicated enable_lapic() call from ASUS P2B-D's romstage.c,
that function is always called if either CONFIG_SMP and/or CONFIG_IOAPIC
are set.
- Rework ASUS P2B-D mptable.c to fix a number of things:
- Convert it to use mptable_write_buses() as all mptable.c files should do.
- Fix incorrect IOAPICID (it's 0x11 for the external 82093AA IOAPIC).
- Fix a bunch of hardcoded bus IDs, remove incorrect entries, etc.
This is build-tested on ASUS P2B-D, and also boot-tested successfully there.
On Linux I now get two entries in /proc/cpuinfo (where only one appeared
before this patch), i.e. both populated CPUs are found.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5998 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/mainboard/asus/p2b-d/Kconfig b/src/mainboard/asus/p2b-d/Kconfig
index 2643686..cb9a69a 100644
--- a/src/mainboard/asus/p2b-d/Kconfig
+++ b/src/mainboard/asus/p2b-d/Kconfig
@@ -28,6 +28,7 @@
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select SMP
+ select IOAPIC
select UDELAY_TSC
select BOARD_ROMSIZE_KB_256
select SDRAMPWR_4DIMM
@@ -48,4 +49,8 @@
int
default 2
+config MAX_PHYSICAL_CPUS
+ int
+ default 2
+
endif # BOARD_ASUS_P2B_D
diff --git a/src/mainboard/asus/p2b-d/devicetree.cb b/src/mainboard/asus/p2b-d/devicetree.cb
index ad289e8..64219b7 100644
--- a/src/mainboard/asus/p2b-d/devicetree.cb
+++ b/src/mainboard/asus/p2b-d/devicetree.cb
@@ -1,10 +1,10 @@
chip northbridge/intel/i440bx # Northbridge
- device lapic_cluster 0 on # APIC cluster
- chip cpu/intel/slot_1 # CPU
- device lapic 0 on end # APIC
+ device lapic_cluster 0 on # (L)APIC cluster
+ chip cpu/intel/slot_1 # CPU socket 0
+ device lapic 0 on end # Local APIC of CPU 0
end
- chip cpu/intel/slot_1 # CPU
- device lapic 1 on end # APIC
+ chip cpu/intel/slot_1 # CPU socket 1
+ device lapic 1 on end # Local APIC of CPU 1
end
end
device pci_domain 0 on # PCI domain
diff --git a/src/mainboard/asus/p2b-d/mptable.c b/src/mainboard/asus/p2b-d/mptable.c
index 12ca789..699cbea 100644
--- a/src/mainboard/asus/p2b-d/mptable.c
+++ b/src/mainboard/asus/p2b-d/mptable.c
@@ -27,6 +27,7 @@
static void *smp_write_config_table(void *v)
{
+ int ioapic_id, ioapic_ver, isa_bus;
struct mp_config_table *mc;
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
@@ -35,13 +36,12 @@
smp_write_processors(mc);
- /* Bus: Bus ID Type */
- smp_write_bus(mc, 0, "PCI ");
- smp_write_bus(mc, 1, "PCI ");
- smp_write_bus(mc, 2, "ISA ");
+ mptable_write_buses(mc, NULL, &isa_bus);
- /* I/O APICs: APIC ID Version State Address */
- smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR);
+ ioapic_id = 2;
+ ioapic_ver = 0x11; /* External Intel 82093AA IOAPIC. */
+ smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR);
+
{
device_t dev;
struct resource *res;
@@ -49,45 +49,39 @@
if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (res)
- smp_write_ioapic(mc, 3, 0x20, res->base);
+ smp_write_ioapic(mc, 3, ioapic_ver, res->base);
}
dev = dev_find_slot(1, PCI_DEVFN(0x1c, 0));
if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (res)
- smp_write_ioapic(mc, 4, 0x20, res->base);
+ smp_write_ioapic(mc, 4, ioapic_ver, res->base);
}
dev = dev_find_slot(4, PCI_DEVFN(0x1e, 0));
if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (res)
- smp_write_ioapic(mc, 5, 0x20, res->base);
+ smp_write_ioapic(mc, 5, ioapic_ver, res->base);
}
dev = dev_find_slot(4, PCI_DEVFN(0x1c, 0));
if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (res)
- smp_write_ioapic(mc, 8, 0x20, res->base);
+ smp_write_ioapic(mc, 8, ioapic_ver, res->base);
}
}
- mptable_add_isa_interrupts(mc, 0x2, 0x2, 0);
+ /* Legacy Interrupts */
+ mptable_add_isa_interrupts(mc, isa_bus, ioapic_id, 0);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
- 0x2, 0xb, 0x2, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
- 0x2, 0xa, 0x2, 0x13);
+ /* I/O Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, 0x0, 0x13, ioapic_id, 0x13); /* UHCI */
- /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
- smp_write_lintsrc(mc, mp_ExtINT,
- MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 0x2, 0x0,
- MP_APIC_ALL, 0x0);
- smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH,
- 0x2, 0x0, MP_APIC_ALL, 0x1);
+ /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */
+ smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x0);
+ smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x1);
- /* There is no extension information... */
-
- /* Compute the checksums */
+ /* Compute the checksums. */
mc->mpe_checksum =
smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
diff --git a/src/mainboard/asus/p2b-d/romstage.c b/src/mainboard/asus/p2b-d/romstage.c
index c5822a5..a4abad4 100644
--- a/src/mainboard/asus/p2b-d/romstage.c
+++ b/src/mainboard/asus/p2b-d/romstage.c
@@ -25,7 +25,6 @@
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include <stdlib.h>
-#include <cpu/x86/lapic.h>
#include <console/console.h>
#include "southbridge/intel/i82371eb/i82371eb.h"
#include "northbridge/intel/i440bx/raminit.h"
@@ -48,8 +47,6 @@
void main(unsigned long bist)
{
- enable_lapic(); /* FIXME? */
-
w83977tf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
diff --git a/src/southbridge/intel/i82371eb/Kconfig b/src/southbridge/intel/i82371eb/Kconfig
index cd457c2..9b037fe 100644
--- a/src/southbridge/intel/i82371eb/Kconfig
+++ b/src/southbridge/intel/i82371eb/Kconfig
@@ -1,6 +1,5 @@
config SOUTHBRIDGE_INTEL_I82371EB
bool
- select IOAPIC
select TINY_BOOTBLOCK
config BOOTBLOCK_SOUTHBRIDGE_INIT
diff --git a/src/southbridge/intel/i82371eb/i82371eb_isa.c b/src/southbridge/intel/i82371eb/i82371eb_isa.c
index 0cc46a6..24d3813 100644
--- a/src/southbridge/intel/i82371eb/i82371eb_isa.c
+++ b/src/southbridge/intel/i82371eb/i82371eb_isa.c
@@ -28,6 +28,35 @@
#include <arch/ioapic.h>
#include "i82371eb.h"
+static void enable_intel_82093aa_ioapic(void)
+{
+ u16 reg16;
+ u32 reg32;
+ u8 ioapic_id = 2;
+ volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR);
+ volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10);
+ device_t dev;
+
+ dev = dev_find_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82371AB_ISA, 0);
+
+ /* Enable IOAPIC. */
+ reg16 = pci_read_config16(dev, XBCS);
+ reg16 |= (1 << 8); /* APIC Chip Select */
+ pci_write_config16(dev, XBCS, reg16);
+
+ /* Set the IOAPIC ID. */
+ *ioapic_index = 0;
+ *ioapic_data = ioapic_id << 24;
+
+ /* Read back and verify the IOAPIC ID. */
+ *ioapic_index = 0;
+ reg32 = (*ioapic_data >> 24) & 0x0f;
+ printk(BIOS_DEBUG, "IOAPIC ID = %x\n", reg32);
+ if (reg32 != ioapic_id)
+ die("IOAPIC error!\n");
+}
+
static void isa_init(struct device *dev)
{
u32 reg32;
@@ -45,6 +74,18 @@
/* Initialize ISA DMA. */
isa_dma_init();
+
+#if CONFIG_IOAPIC
+ /*
+ * Unlike most other southbridges the 82371EB doesn't have a built-in
+ * IOAPIC. Instead, 82371EB-based boards that support multiple CPUs
+ * have a discrete IOAPIC (Intel 82093AA) soldered onto the board.
+ *
+ * Thus, we can/must only enable the IOAPIC if it actually exists,
+ * i.e. the respective mainboard does "select IOAPIC".
+ */
+ enable_intel_82093aa_ioapic();
+#endif
}
static void sb_read_resources(struct device *dev)