haswell: Add initial support for Haswell platforms
The Haswell parts use a PCH code named Lynx Point (Series 8). Therefore,
the southbridge support is included as well. The basis for this code is
the Sandybridge code. Management Engine, IRQ routing, and ACPI still requires
more attention, but this is a good starting point.
This code partially gets up through the romstage just before training
memory on a Haswell reference board.
Change-Id: If572d6c21ca051b486b82a924ca0ffe05c4d0ad4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2616
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
diff --git a/src/northbridge/intel/haswell/raminit.h b/src/northbridge/intel/haswell/raminit.h
new file mode 100644
index 0000000..958e983
--- /dev/null
+++ b/src/northbridge/intel/haswell/raminit.h
@@ -0,0 +1,36 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef RAMINIT_H
+#define RAMINIT_H
+
+#include "pei_data.h"
+
+struct sys_info {
+ u8 boot_path;
+#define BOOT_PATH_NORMAL 0
+#define BOOT_PATH_RESET 1
+#define BOOT_PATH_RESUME 2
+} __attribute__ ((packed));
+
+void sdram_initialize(struct pei_data *pei_data);
+unsigned long get_top_of_ram(void);
+int fixup_haswell_errata(void);
+
+#endif /* RAMINIT_H */