haswell: Add initial support for Haswell platforms
The Haswell parts use a PCH code named Lynx Point (Series 8). Therefore,
the southbridge support is included as well. The basis for this code is
the Sandybridge code. Management Engine, IRQ routing, and ACPI still requires
more attention, but this is a good starting point.
This code partially gets up through the romstage just before training
memory on a Haswell reference board.
Change-Id: If572d6c21ca051b486b82a924ca0ffe05c4d0ad4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2616
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
diff --git a/src/cpu/intel/haswell/haswell_init.c b/src/cpu/intel/haswell/haswell_init.c
new file mode 100644
index 0000000..01d151e
--- /dev/null
+++ b/src/cpu/intel/haswell/haswell_init.c
@@ -0,0 +1,572 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <cpu/cpu.h>
+#include <cpu/x86/mtrr.h>
+#include <cpu/x86/msr.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/intel/microcode.h>
+#include <cpu/intel/speedstep.h>
+#include <cpu/intel/turbo.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/name.h>
+#include <pc80/mc146818rtc.h>
+#include <usbdebug.h>
+#include "haswell.h"
+#include "chip.h"
+
+/*
+ * List of suported C-states in this processor
+ *
+ * Latencies are typical worst-case package exit time in uS
+ * taken from the SandyBridge BIOS specification.
+ */
+#if 0
+static acpi_cstate_t cstate_map[] = {
+ { /* 0: C0 */
+ },{ /* 1: C1 */
+ .latency = 1,
+ .power = 1000,
+ .resource = {
+ .addrl = 0x00, /* MWAIT State 0 */
+ .space_id = ACPI_ADDRESS_SPACE_FIXED,
+ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
+ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
+ .resv = ACPI_FFIXEDHW_FLAG_HW_COORD,
+ }
+ },
+ { /* 2: C1E */
+ .latency = 1,
+ .power = 1000,
+ .resource = {
+ .addrl = 0x01, /* MWAIT State 0 Sub-state 1 */
+ .space_id = ACPI_ADDRESS_SPACE_FIXED,
+ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
+ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
+ .resv = ACPI_FFIXEDHW_FLAG_HW_COORD,
+ }
+ },
+ { /* 3: C3 */
+ .latency = 63,
+ .power = 500,
+ .resource = {
+ .addrl = 0x10, /* MWAIT State 1 */
+ .space_id = ACPI_ADDRESS_SPACE_FIXED,
+ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
+ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
+ .resv = ACPI_FFIXEDHW_FLAG_HW_COORD,
+ }
+ },
+ { /* 4: C6 */
+ .latency = 87,
+ .power = 350,
+ .resource = {
+ .addrl = 0x20, /* MWAIT State 2 */
+ .space_id = ACPI_ADDRESS_SPACE_FIXED,
+ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
+ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
+ .resv = ACPI_FFIXEDHW_FLAG_HW_COORD,
+ }
+ },
+ { /* 5: C7 */
+ .latency = 90,
+ .power = 200,
+ .resource = {
+ .addrl = 0x30, /* MWAIT State 3 */
+ .space_id = ACPI_ADDRESS_SPACE_FIXED,
+ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
+ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
+ .resv = ACPI_FFIXEDHW_FLAG_HW_COORD,
+ }
+ },
+ { /* 6: C7S */
+ .latency = 90,
+ .power = 200,
+ .resource = {
+ .addrl = 0x31, /* MWAIT State 3 Sub-state 1 */
+ .space_id = ACPI_ADDRESS_SPACE_FIXED,
+ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
+ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
+ .resv = ACPI_FFIXEDHW_FLAG_HW_COORD,
+ }
+ },
+ { 0 }
+};
+#endif
+
+/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */
+static const u8 power_limit_time_sec_to_msr[] = {
+ [0] = 0x00,
+ [1] = 0x0a,
+ [2] = 0x0b,
+ [3] = 0x4b,
+ [4] = 0x0c,
+ [5] = 0x2c,
+ [6] = 0x4c,
+ [7] = 0x6c,
+ [8] = 0x0d,
+ [10] = 0x2d,
+ [12] = 0x4d,
+ [14] = 0x6d,
+ [16] = 0x0e,
+ [20] = 0x2e,
+ [24] = 0x4e,
+ [28] = 0x6e,
+ [32] = 0x0f,
+ [40] = 0x2f,
+ [48] = 0x4f,
+ [56] = 0x6f,
+ [64] = 0x10,
+ [80] = 0x30,
+ [96] = 0x50,
+ [112] = 0x70,
+ [128] = 0x11,
+};
+
+/* Convert POWER_LIMIT_1_TIME MSR value to seconds */
+static const u8 power_limit_time_msr_to_sec[] = {
+ [0x00] = 0,
+ [0x0a] = 1,
+ [0x0b] = 2,
+ [0x4b] = 3,
+ [0x0c] = 4,
+ [0x2c] = 5,
+ [0x4c] = 6,
+ [0x6c] = 7,
+ [0x0d] = 8,
+ [0x2d] = 10,
+ [0x4d] = 12,
+ [0x6d] = 14,
+ [0x0e] = 16,
+ [0x2e] = 20,
+ [0x4e] = 24,
+ [0x6e] = 28,
+ [0x0f] = 32,
+ [0x2f] = 40,
+ [0x4f] = 48,
+ [0x6f] = 56,
+ [0x10] = 64,
+ [0x30] = 80,
+ [0x50] = 96,
+ [0x70] = 112,
+ [0x11] = 128,
+};
+
+int cpu_config_tdp_levels(void)
+{
+ msr_t platform_info;
+
+ /* Bits 34:33 indicate how many levels supported */
+ platform_info = rdmsr(MSR_PLATFORM_INFO);
+ return (platform_info.hi >> 1) & 3;
+}
+
+/*
+ * Configure processor power limits if possible
+ * This must be done AFTER set of BIOS_RESET_CPL
+ */
+void set_power_limits(u8 power_limit_1_time)
+{
+ msr_t msr = rdmsr(MSR_PLATFORM_INFO);
+ msr_t limit;
+ unsigned power_unit;
+ unsigned tdp, min_power, max_power, max_time;
+ u8 power_limit_1_val;
+
+ if (power_limit_1_time > ARRAY_SIZE(power_limit_time_sec_to_msr))
+ return;
+
+ if (!(msr.lo & PLATFORM_INFO_SET_TDP))
+ return;
+
+ /* Get units */
+ msr = rdmsr(MSR_PKG_POWER_SKU_UNIT);
+ power_unit = 2 << ((msr.lo & 0xf) - 1);
+
+ /* Get power defaults for this SKU */
+ msr = rdmsr(MSR_PKG_POWER_SKU);
+ tdp = msr.lo & 0x7fff;
+ min_power = (msr.lo >> 16) & 0x7fff;
+ max_power = msr.hi & 0x7fff;
+ max_time = (msr.hi >> 16) & 0x7f;
+
+ printk(BIOS_DEBUG, "CPU TDP: %u Watts\n", tdp / power_unit);
+
+ if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time)
+ power_limit_1_time = power_limit_time_msr_to_sec[max_time];
+
+ if (min_power > 0 && tdp < min_power)
+ tdp = min_power;
+
+ if (max_power > 0 && tdp > max_power)
+ tdp = max_power;
+
+ power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time];
+
+ /* Set long term power limit to TDP */
+ limit.lo = 0;
+ limit.lo |= tdp & PKG_POWER_LIMIT_MASK;
+ limit.lo |= PKG_POWER_LIMIT_EN;
+ limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) <<
+ PKG_POWER_LIMIT_TIME_SHIFT;
+
+ /* Set short term power limit to 1.25 * TDP */
+ limit.hi = 0;
+ limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK;
+ limit.hi |= PKG_POWER_LIMIT_EN;
+ /* Power limit 2 time is only programmable on SNB EP/EX */
+
+ wrmsr(MSR_PKG_POWER_LIMIT, limit);
+
+ /* Use nominal TDP values for CPUs with configurable TDP */
+ if (cpu_config_tdp_levels()) {
+ msr = rdmsr(MSR_CONFIG_TDP_NOMINAL);
+ limit.hi = 0;
+ limit.lo = msr.lo & 0xff;
+ wrmsr(MSR_TURBO_ACTIVATION_RATIO, limit);
+ }
+}
+
+#if 0
+static void configure_c_states(void)
+{
+ msr_t msr;
+
+ msr = rdmsr(MSR_PMG_CST_CONFIG_CONTROL);
+ msr.lo |= (1 << 28); // C1 Auto Undemotion Enable
+ msr.lo |= (1 << 27); // C3 Auto Undemotion Enable
+ msr.lo |= (1 << 26); // C1 Auto Demotion Enable
+ msr.lo |= (1 << 25); // C3 Auto Demotion Enable
+ msr.lo &= ~(1 << 10); // Disable IO MWAIT redirection
+ msr.lo |= 7; // No package C-state limit
+ wrmsr(MSR_PMG_CST_CONFIG_CONTROL, msr);
+
+ msr = rdmsr(MSR_PMG_IO_CAPTURE_BASE);
+ msr.lo &= ~0x7ffff;
+ msr.lo |= (PMB0_BASE + 4); // LVL_2 base address
+ msr.lo |= (2 << 16); // CST Range: C7 is max C-state
+ wrmsr(MSR_PMG_IO_CAPTURE_BASE, msr);
+
+ msr = rdmsr(MSR_MISC_PWR_MGMT);
+ msr.lo &= ~(1 << 0); // Enable P-state HW_ALL coordination
+ wrmsr(MSR_MISC_PWR_MGMT, msr);
+
+ msr = rdmsr(MSR_POWER_CTL);
+ msr.lo |= (1 << 18); // Enable Energy Perf Bias MSR 0x1b0
+ msr.lo |= (1 << 1); // C1E Enable
+ msr.lo |= (1 << 0); // Bi-directional PROCHOT#
+ wrmsr(MSR_POWER_CTL, msr);
+
+ /* C3 Interrupt Response Time Limit */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_1024_NS | 0x50;
+ wrmsr(MSR_PKGC3_IRTL, msr);
+
+ /* C6 Interrupt Response Time Limit */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_1024_NS | 0x68;
+ wrmsr(MSR_PKGC6_IRTL, msr);
+
+ /* C7 Interrupt Response Time Limit */
+ msr.hi = 0;
+ msr.lo = IRTL_VALID | IRTL_1024_NS | 0x6D;
+ wrmsr(MSR_PKGC7_IRTL, msr);
+
+ /* Primary Plane Current Limit */
+ msr = rdmsr(MSR_PP0_CURRENT_CONFIG);
+ msr.lo &= ~0x1fff;
+ msr.lo |= PP0_CURRENT_LIMIT;
+ wrmsr(MSR_PP0_CURRENT_CONFIG, msr);
+
+ /* Secondary Plane Current Limit */
+ msr = rdmsr(MSR_PP1_CURRENT_CONFIG);
+ msr.lo &= ~0x1fff;
+ if (cpuid_eax(1) >= 0x30600)
+ msr.lo |= PP1_CURRENT_LIMIT_IVB;
+ else
+ msr.lo |= PP1_CURRENT_LIMIT_SNB;
+ wrmsr(MSR_PP1_CURRENT_CONFIG, msr);
+}
+#endif
+
+static void configure_thermal_target(void)
+{
+ struct cpu_intel_haswell_config *conf;
+ device_t lapic;
+ msr_t msr;
+
+ /* Find pointer to CPU configuration */
+ lapic = dev_find_lapic(SPEEDSTEP_APIC_MAGIC);
+ if (!lapic || !lapic->chip_info)
+ return;
+ conf = lapic->chip_info;
+
+ /* Set TCC activaiton offset if supported */
+ msr = rdmsr(MSR_PLATFORM_INFO);
+ if ((msr.lo & (1 << 30)) && conf->tcc_offset) {
+ msr = rdmsr(MSR_TEMPERATURE_TARGET);
+ msr.lo &= ~(0xf << 24); /* Bits 27:24 */
+ msr.lo |= (conf->tcc_offset & 0xf) << 24;
+ wrmsr(MSR_TEMPERATURE_TARGET, msr);
+ }
+}
+
+static void configure_misc(void)
+{
+ msr_t msr;
+
+ msr = rdmsr(IA32_MISC_ENABLE);
+ msr.lo |= (1 << 0); /* Fast String enable */
+ msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */
+ msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */
+ wrmsr(IA32_MISC_ENABLE, msr);
+
+ /* Disable Thermal interrupts */
+ msr.lo = 0;
+ msr.hi = 0;
+ wrmsr(IA32_THERM_INTERRUPT, msr);
+
+ /* Enable package critical interrupt only */
+ msr.lo = 1 << 4;
+ msr.hi = 0;
+ wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr);
+}
+
+static void enable_lapic_tpr(void)
+{
+ msr_t msr;
+
+ msr = rdmsr(MSR_PIC_MSG_CONTROL);
+ msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */
+ wrmsr(MSR_PIC_MSG_CONTROL, msr);
+}
+
+static void configure_dca_cap(void)
+{
+ struct cpuid_result cpuid_regs;
+ msr_t msr;
+
+ /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */
+ cpuid_regs = cpuid(1);
+ if (cpuid_regs.ecx & (1 << 18)) {
+ msr = rdmsr(IA32_PLATFORM_DCA_CAP);
+ msr.lo |= 1;
+ wrmsr(IA32_PLATFORM_DCA_CAP, msr);
+ }
+}
+
+static void set_max_ratio(void)
+{
+ msr_t msr, perf_ctl;
+
+ perf_ctl.hi = 0;
+
+ /* Check for configurable TDP option */
+ if (cpu_config_tdp_levels()) {
+ /* Set to nominal TDP ratio */
+ msr = rdmsr(MSR_CONFIG_TDP_NOMINAL);
+ perf_ctl.lo = (msr.lo & 0xff) << 8;
+ } else {
+ /* Platform Info bits 15:8 give max ratio */
+ msr = rdmsr(MSR_PLATFORM_INFO);
+ perf_ctl.lo = msr.lo & 0xff00;
+ }
+ wrmsr(IA32_PERF_CTL, perf_ctl);
+
+ printk(BIOS_DEBUG, "haswell: frequency set to %d\n",
+ ((perf_ctl.lo >> 8) & 0xff) * HASWELL_BCLK);
+}
+
+static void set_energy_perf_bias(u8 policy)
+{
+ msr_t msr;
+
+ /* Energy Policy is bits 3:0 */
+ msr = rdmsr(IA32_ENERGY_PERFORMANCE_BIAS);
+ msr.lo &= ~0xf;
+ msr.lo |= policy & 0xf;
+ wrmsr(IA32_ENERGY_PERFORMANCE_BIAS, msr);
+
+ printk(BIOS_DEBUG, "haswell: energy policy set to %u\n",
+ policy);
+}
+
+static void configure_mca(void)
+{
+ msr_t msr;
+ int i;
+
+ msr.lo = msr.hi = 0;
+ /* This should only be done on a cold boot */
+ for (i = 0; i < 7; i++)
+ wrmsr(IA32_MC0_STATUS + (i * 4), msr);
+}
+
+#if CONFIG_USBDEBUG
+static unsigned ehci_debug_addr;
+#endif
+
+/*
+ * Initialize any extra cores/threads in this package.
+ */
+static void intel_cores_init(device_t cpu)
+{
+ struct cpuid_result result;
+ unsigned threads_per_package, threads_per_core, i;
+
+ /* Logical processors (threads) per core */
+ result = cpuid_ext(0xb, 0);
+ threads_per_core = result.ebx & 0xffff;
+
+ /* Logical processors (threads) per package */
+ result = cpuid_ext(0xb, 1);
+ threads_per_package = result.ebx & 0xffff;
+
+ /* Only initialize extra cores from BSP */
+ if (cpu->path.apic.apic_id)
+ return;
+
+ printk(BIOS_DEBUG, "CPU: %u has %u cores, %u threads per core\n",
+ cpu->path.apic.apic_id, threads_per_package/threads_per_core,
+ threads_per_core);
+
+ for (i = 1; i < threads_per_package; ++i) {
+ struct device_path cpu_path;
+ device_t new;
+
+ /* Build the cpu device path */
+ cpu_path.type = DEVICE_PATH_APIC;
+ cpu_path.apic.apic_id =
+ cpu->path.apic.apic_id + i;
+
+ /* Update APIC ID if no hyperthreading */
+ if (threads_per_core == 1)
+ cpu_path.apic.apic_id <<= 1;
+
+ /* Allocate the new cpu device structure */
+ new = alloc_dev(cpu->bus, &cpu_path);
+ if (!new)
+ continue;
+
+ printk(BIOS_DEBUG, "CPU: %u has core %u\n",
+ cpu->path.apic.apic_id,
+ new->path.apic.apic_id);
+
+#if CONFIG_SMP && CONFIG_MAX_CPUS > 1
+ /* Start the new cpu */
+ if (!start_cpu(new)) {
+ /* Record the error in cpu? */
+ printk(BIOS_ERR, "CPU %u would not start!\n",
+ new->path.apic.apic_id);
+ }
+#endif
+ }
+}
+
+static void haswell_init(device_t cpu)
+{
+ char processor_name[49];
+ struct cpuid_result cpuid_regs;
+
+ intel_update_microcode_from_cbfs();
+
+ /* Turn on caching if we haven't already */
+ x86_enable_cache();
+
+ /* Clear out pending MCEs */
+ configure_mca();
+
+ /* Print processor name */
+ fill_processor_name(processor_name);
+ printk(BIOS_INFO, "CPU: %s.\n", processor_name);
+
+#if CONFIG_USBDEBUG
+ // Is this caution really needed?
+ if(!ehci_debug_addr)
+ ehci_debug_addr = get_ehci_debug();
+ set_ehci_debug(0);
+#endif
+
+ /* Setup MTRRs based on physical address size */
+ cpuid_regs = cpuid(0x80000008);
+ x86_setup_fixed_mtrrs();
+ x86_setup_var_mtrrs(cpuid_regs.eax & 0xff, 2);
+ x86_mtrr_check();
+
+ /* Setup Page Attribute Tables (PAT) */
+ // TODO set up PAT
+
+#if CONFIG_USBDEBUG
+ set_ehci_debug(ehci_debug_addr);
+#endif
+
+ /* Enable the local cpu apics */
+ enable_lapic_tpr();
+ setup_lapic();
+
+ /* Configure C States */
+ //configure_c_states();
+
+ /* Configure Enhanced SpeedStep and Thermal Sensors */
+ configure_misc();
+
+ /* Thermal throttle activation offset */
+ configure_thermal_target();
+
+ /* Enable Direct Cache Access */
+ configure_dca_cap();
+
+ /* Set energy policy */
+ set_energy_perf_bias(ENERGY_POLICY_NORMAL);
+
+ /* Set Max Ratio */
+ set_max_ratio();
+
+ /* Enable Turbo */
+ enable_turbo();
+
+ /* Start up extra cores */
+ intel_cores_init(cpu);
+}
+
+static struct device_operations cpu_dev_ops = {
+ .init = haswell_init,
+};
+
+static struct cpu_device_id cpu_table[] = {
+ { X86_VENDOR_INTEL, 0x306c1 }, /* Intel Haswell 4+2 A0 */
+ { X86_VENDOR_INTEL, 0x306c2 }, /* Intel Haswell 4+2 B0 */
+ { X86_VENDOR_INTEL, 0x40660 }, /* Intel Haswell 4+3 B0 */
+ { 0, 0 },
+};
+
+static const struct cpu_driver driver __cpu_driver = {
+ .ops = &cpu_dev_ops,
+ .id_table = cpu_table,
+ /* .cstates = cstate_map, */
+};
+