mb/google/poppy/variants/soraka: Disable SPI TPM
Soraka is no longer using SPI TPM. This change disables GSPI0 in
device tree and updates gpio config accordingly.
Change-Id: Ia0554ce3a0d553631123cc2b23b6dc2f6f40a1a3
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
diff --git a/src/mainboard/google/poppy/variants/soraka/devicetree.cb b/src/mainboard/google/poppy/variants/soraka/devicetree.cb
index 5e5a537..f71a1eb 100644
--- a/src/mainboard/google/poppy/variants/soraka/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/soraka/devicetree.cb
@@ -232,13 +232,6 @@
},
}"
- # Use GSPI0 for cr50 TPM. Early init is required to set up a BAR for TPM
- # communication before memory is up.
- register "gspi[0]" = "{
- .speed_mhz = 1,
- .early_init = 1,
- }"
-
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
@@ -247,7 +240,7 @@
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
[PchSerialIoIndexI2C4] = PchSerialIoPci,
[PchSerialIoIndexI2C5] = PchSerialIoPci,
- [PchSerialIoIndexSpi0] = PchSerialIoPci,
+ [PchSerialIoIndexSpi0] = PchSerialIoDisabled,
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
[PchSerialIoIndexUart0] = PchSerialIoPci,
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
@@ -358,14 +351,7 @@
device pci 1d.3 off end # PCI Express Port 12
device pci 1e.0 on end # UART #0
device pci 1e.1 off end # UART #1
- device pci 1e.2 on
- chip drivers/spi/acpi
- register "hid" = "ACPI_DT_NAMESPACE_HID"
- register "compat_string" = ""google,cr50""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)"
- device spi 0 on end
- end
- end # GSPI #0
+ device pci 1e.2 off end # GSPI #0
device pci 1e.3 off end # GSPI #1
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO