Add new ec subdir for Embedded Controllers and common ACPI EC support
Adds a new src/ec subdir for embedded controllers (mostly found in laptops)
and converts Getac P470 and Roda RK886EX to use the new ACPI EC instead
of having their own copies of those functions.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6304 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/mainboard/getac/p470/ec_oem.c b/src/mainboard/getac/p470/ec_oem.c
new file mode 100644
index 0000000..30d4135
--- /dev/null
+++ b/src/mainboard/getac/p470/ec_oem.c
@@ -0,0 +1,130 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include <delay.h>
+#include <ec/acpi/ec.h>
+#include "ec_oem.h"
+
+int send_ec_oem_command(u8 command)
+{
+ int timeout;
+
+ timeout = 0x7ff;
+ while ((inb(EC_OEM_SC) & EC_IBF) && --timeout) {
+ udelay(10);
+ if ((timeout & 0xff) == 0)
+ printk(BIOS_SPEW, ".");
+ }
+ if (!timeout) {
+ printk(BIOS_DEBUG, "Timeout while sending OEM command 0x%02x to EC!\n",
+ command);
+ // return -1;
+ }
+
+ outb(command, EC_OEM_SC);
+ return 0;
+}
+
+int send_ec_oem_data(u8 data)
+{
+ int timeout;
+
+ timeout = 0x7ff;
+ while ((inb(EC_OEM_SC) & EC_IBF) && --timeout) { // wait for IBF = 0
+ udelay(10);
+ if ((timeout & 0xff) == 0)
+ printk(BIOS_SPEW, ".");
+ }
+ if (!timeout) {
+ printk(BIOS_DEBUG, "Timeout while sending OEM data 0x%02x to EC!\n",
+ data);
+ // return -1;
+ }
+
+ outb(data, EC_OEM_DATA);
+
+ return 0;
+}
+
+int send_ec_oem_data_nowait(u8 data)
+{
+ outb(data, EC_OEM_DATA);
+
+ return 0;
+}
+
+u8 recv_ec_oem_data(void)
+{
+ int timeout;
+ u8 data;
+
+ timeout = 0x7fff;
+ while (--timeout) { // Wait for OBF = 1
+ if (inb(EC_OEM_SC) & EC_OBF) {
+ break;
+ }
+ udelay(10);
+ if ((timeout & 0xff) == 0)
+ printk(BIOS_SPEW, ".");
+ }
+ if (!timeout) {
+ printk(BIOS_DEBUG, "\nTimeout while receiving OEM data from EC!\n");
+ // return -1;
+ }
+
+ data = inb(EC_OEM_DATA);
+ // printk(BIOS_SPEW, "recv_ec_oem_data: 0x%02x\n", data);
+
+ return data;
+}
+
+u8 ec_oem_read(u8 addr)
+{
+ send_ec_oem_command(0x80);
+ send_ec_oem_data(addr);
+
+ return recv_ec_oem_data();
+}
+
+int ec_oem_write(u8 addr, u8 data)
+{
+ send_ec_oem_command(0x81);
+ send_ec_oem_data(addr);
+ return send_ec_oem_data(data);
+}
+
+int ec_oem_dump_status(void)
+{
+ u8 ec_sc = inb(EC_OEM_SC);
+ printk(BIOS_DEBUG, "Embedded Controller Status: ");
+ if (ec_sc & (1 << 6)) printk(BIOS_DEBUG, "SMI_EVT ");
+ if (ec_sc & (1 << 5)) printk(BIOS_DEBUG, "SCI_EVT ");
+ if (ec_sc & (1 << 4)) printk(BIOS_DEBUG, "BURST ");
+ if (ec_sc & (1 << 3)) printk(BIOS_DEBUG, "CMD ");
+ if (ec_sc & (1 << 1)) printk(BIOS_DEBUG, "IBF ");
+ if (ec_sc & (1 << 0)) printk(BIOS_DEBUG, "OBF ");
+ printk(BIOS_DEBUG, "\n");
+
+ return ec_sc;
+}
+