Limit SPI device debug prints with CONFIG_DEBUG_SPI_FLASH
Fix debug printks which were not using CONFIG_DEBUG_SPI_FLASH,
which would cause long delays durring boot when SPI devices
were written.
Change-Id: I99fc3d5f847fdf4bb98e2a0342ea418ab7d5fc54
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/1965
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
diff --git a/src/drivers/spi/stmicro.c b/src/drivers/spi/stmicro.c
index ccdfa00..d10429b 100644
--- a/src/drivers/spi/stmicro.c
+++ b/src/drivers/spi/stmicro.c
@@ -190,8 +190,10 @@
byte_addr = 0;
}
- printk(BIOS_INFO, "SF: STMicro: Successfully programmed %zu bytes @ 0x%x\n",
+#if CONFIG_DEBUG_SPI_FLASH
+ printk(BIOS_SPEW, "SF: STMicro: Successfully programmed %zu bytes @ 0x%x\n",
len, offset);
+#endif
spi_release_bus(flash->spi);
return ret;