nb/intel/sandybridge: Always use the same MMCONF_BASE_ADDRESS
'Optimizing' MMCONF_BASE_ADDRESS for the native codepath prevents the
use of fallback/normal with both the native raminit and the mrc.bin.
Using the same MMCONF_BASE_ADDRESS as the mrc.bin codepath means that
128MB less is available to devices using the native raminit. Most
devices reserve 2048M for non memory resources below 4G, which in most
cases is more than adequate. Devices with only 1024M (and that don't
already use the mrc.bin) are:
Those could fail to allocate PCI resources, but on at least x220 with
a somewhat default configuration (USB3 expresscard, Wireless PCIe
card) it still boots fine, so one should not expect many problems from
Signed-off-by: Arthur Heymans <firstname.lastname@example.org>
Tested-by: build bot (Jenkins) <email@example.com>
Reviewed-by: Nico Huber <firstname.lastname@example.org>
diff --git a/src/northbridge/intel/sandybridge/Kconfig b/src/northbridge/intel/sandybridge/Kconfig
index 36cf940..fce1a49 100644
@@ -94,11 +94,9 @@
- default 0xf8000000 if USE_NATIVE_RAMINIT
- We can optimize the native case but the MRC blob requires it
- to be at 0xf0000000.
+ The MRC blob requires it to be at 0xf0000000.