t210: lp0_resume: Configure unused SDMMC1/3 pads for low power leakage
In LP0 resume, a couple of SDMMCx pad settings need to be set to 0 to
reduce power leakage.
BUG=None
BRANCH=None
TEST=Tested on Smaug; able to suspend/resume >100 times
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9f35a90a8af2180443db2c4be75d4566d0990de5
Original-Change-Id: Ifc946b0cea437ef0807cea0c11609d8e09387e8e
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/298195
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Tested-by: Joseph Lo <josephl@nvidia.com>
Original-(cherry picked from commit be3ac49a6bc4c9088d3799555d69c87c8ce1693c)
Original-Reviewed-on: https://chromium-review.googlesource.com/298154
Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: If5d5cebc89b8220480b3c72293a410e782eb437e
Reviewed-on: http://review.coreboot.org/11656
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
diff --git a/src/soc/nvidia/tegra210/lp0/tegra_lp0_resume.c b/src/soc/nvidia/tegra210/lp0/tegra_lp0_resume.c
index 956e8c5..87e42e3 100644
--- a/src/soc/nvidia/tegra210/lp0/tegra_lp0_resume.c
+++ b/src/soc/nvidia/tegra210/lp0/tegra_lp0_resume.c
@@ -30,6 +30,8 @@
PMC_CTLR_BASE = 0x7000e400,
MC_CTLR_BASE = 0x70019000,
FUSE_BASE = 0x7000F800,
+ TEGRA_SDMMC1_BASE = 0x700b0000,
+ TEGRA_SDMMC3_BASE = 0x700b0400,
EMC_BASE = 0x7001B000,
I2C5_BASE = 0x7000D000,
I2S_BASE = 0x702d1000
@@ -79,6 +81,8 @@
SWR_TRIG_SYS_RST = 0x1 << 2
};
+static uint32_t *clk_rst_rst_devices_u_ptr = (void *)(CLK_RST_BASE + 0xc);
+
static uint32_t *clk_rst_cclkg_burst_policy_ptr = (void *)(CLK_RST_BASE + 0x368);
enum {
CCLKG_PLLP_BURST_POLICY = 0x20004444
@@ -810,6 +814,49 @@
write32(clk_rst_clk_enb_w_set_ptr, CLK_ENB_MC1);
}
+static uint32_t *sdmmc1_vendor_io_trim = (void *)(TEGRA_SDMMC1_BASE + 0x1ac);
+static uint32_t *sdmmc3_vendor_io_trim = (void *)(TEGRA_SDMMC3_BASE + 0x1ac);
+static uint32_t *sdmmc1_comppadctrl = (void *)(TEGRA_SDMMC1_BASE + 0x1e0);
+static uint32_t *sdmmc3_comppadctrl = (void *)(TEGRA_SDMMC3_BASE + 0x1e0);
+
+enum {
+ SDMMC1_DEV_L = 0x1 << 14,
+ SDMMC3_DEV_U = 0x1 << 5,
+ PAD_E_INPUT_COMPPADCTRL = 0x1 << 31,
+ SEL_VREG_VENDOR_IO_TRIM = 0x1 << 2
+};
+
+static void low_power_sdmmc_pads(void)
+{
+ /* Enable SDMMC1 clock */
+ setbits32(SDMMC1_DEV_L, clk_rst_clk_out_enb_l_ptr);
+ udelay(2);
+ /* Unreset SDMMC1 */
+ clrbits32(SDMMC1_DEV_L, clk_rst_rst_devices_l_ptr);
+
+ /* Clear SEL_VREG bit and PAD_E_INPUT bit of SDMMC1 */
+ clrbits32(SEL_VREG_VENDOR_IO_TRIM, sdmmc1_vendor_io_trim);
+ clrbits32(PAD_E_INPUT_COMPPADCTRL, sdmmc1_comppadctrl);
+ /* Read the last accessed SDMMC1 register then disable SDMMC1 clock */
+ read32(sdmmc1_comppadctrl);
+ /* Disable SDMMC1 clock, but keep SDMMC1 un-reset */
+ clrbits32(SDMMC1_DEV_L, clk_rst_clk_out_enb_l_ptr);
+
+ /* Enable SDMMC3 clock */
+ setbits32(SDMMC3_DEV_U, clk_rst_clk_out_enb_u_ptr);
+ udelay(2);
+ /* Unreset SDMMC3 */
+ clrbits32(SDMMC3_DEV_U, clk_rst_rst_devices_u_ptr);
+
+ /* Clear SEL_VREG bit and PAD_E_INPUT bit of SDMMC3 */
+ clrbits32(SEL_VREG_VENDOR_IO_TRIM, sdmmc3_vendor_io_trim);
+ clrbits32(PAD_E_INPUT_COMPPADCTRL, sdmmc3_comppadctrl);
+ /* Read the last accessed SDMMC3 register then disable SDMMC3 clock */
+ read32(sdmmc3_comppadctrl);
+ /* Disable SDMMC3 clock, but keep SDMMC3 un-reset */
+ clrbits32(SDMMC3_DEV_U, clk_rst_clk_out_enb_u_ptr);
+}
+
static void config_mselect(void)
{
/* Set MSELECT clock source to PLL_P with 1:4 divider */
@@ -895,6 +942,9 @@
/* Restore CAR CE's, SLCG overrides */
mbist_workaround();
+ /* Configure unused SDMMC1/3 pads for low power leakage */
+ low_power_sdmmc_pads();
+
/*
* Find out which CPU (slow or fast) to wake up. The default setting
* in flow controller is to wake up GCPU