mb/dell/optiplex_9010: Add Dell OptiPlex 9010 SFF support
Based on the autoport. The OptiPlex 9010 comes in four different sizes:
MT, DT, SFF and USFF. Tested on SFF only. The other PCBs are slightly
different, but they are designed with intercompatibility in mind. With
small devicetree overrides it should work on OptiPlex 7010 and other
OptiPlex 9010 variants as well.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I88d65cae30d08ca727d86d930707c2be25a527cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40351
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/mainboard/dell/optiplex_9010/early_init.c b/src/mainboard/dell/optiplex_9010/early_init.c
new file mode 100644
index 0000000..5469c94
--- /dev/null
+++ b/src/mainboard/dell/optiplex_9010/early_init.c
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <bootblock_common.h>
+#include <device/pci_ops.h>
+#include <northbridge/intel/sandybridge/sandybridge.h>
+#include <southbridge/intel/bd82x6x/pch.h>
+#include <superio/smsc/sch5545/sch5545.h>
+#include <superio/smsc/sch5545/sch5545_emi.h>
+
+#include "sch5545_ec.h"
+
+const struct southbridge_usb_port mainboard_usb_ports[] = {
+ { 1, 6, 0 },
+ { 1, 6, 0 },
+ { 1, 1, 1 },
+ { 1, 1, 1 },
+ { 1, 1, 2 },
+ { 1, 1, 2 },
+ { 1, 6, 3 },
+ { 1, 6, 3 },
+ { 1, 6, 4 },
+ { 1, 6, 4 },
+ { 1, 6, 5 },
+ { 1, 1, 5 },
+ { 1, 1, 6 },
+ { 1, 6, 6 },
+};
+
+void bootblock_mainboard_early_init(void)
+{
+ /*
+ * FIXME: the board gets stuck in reset loop in
+ * mainboard_romstage_entry. Avoid that by clearing SSKPD
+ */
+ pci_write_config32(HOST_BRIDGE, MCHBAR, (uintptr_t)DEFAULT_MCHBAR | 1);
+ pci_write_config32(HOST_BRIDGE, MCHBAR + 4, (0LL + (uintptr_t)DEFAULT_MCHBAR) >> 32);
+ MCHBAR16(SSKPD_HI) = 0;
+
+ sch5545_early_init(0x2e);
+ /* Bare EC and SIO GPIO initialization which allows to enable serial port */
+ sch5545_emi_init(0x2e);
+ sch5545_emi_disable_interrupts();
+ sch5545_ec_early_init();
+
+ if (CONFIG(CONSOLE_SERIAL))
+ sch5545_enable_uart(0x2e, 0);
+}