mainboard/lenovo/t430: Add Thinkpad T430 support
Tested and working:
* HDD LED
* Booting GNU Linux 4.9 from HDD using SeaBios
* Booting GNU Linux 4.9 from USB using SeaBios
* Native GFX init
* All Fn function keys
* Speakers
* PCIe Wifi
* Camera
* WWAN
* Fan (Dynamic Thermal Managment)
* Flashing using internal programmer
* Dual memory DIMMs running at up to DDR3-1866
* AC events
* Touchpad, trackball and keyboard
* USB3 ports running at SuperSpeed
* Ethernet
* Headphone jack
* Speaker mute
* Microphone mute
* Volume keys
* Fingerprint sensor
* Lid switch
* Thinklight
* TPM (disable SeaBios CONFIG_TCGBIOS)
* CMOS options:
** power_on_after_fail
** reboot_counter
** boot_option
** gfx_uma_size
** usb_always_on
Untested:
* Booting Windows
* Hybrid graphics
* Docking station
* VGA
Broken:
* Wifi LED is always on
Change-Id: I5403cfb80a57753e873c570d95ca535cf5f45630
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
diff --git a/src/mainboard/lenovo/t430/devicetree.cb b/src/mainboard/lenovo/t430/devicetree.cb
new file mode 100644
index 0000000..86c8756
--- /dev/null
+++ b/src/mainboard/lenovo/t430/devicetree.cb
@@ -0,0 +1,194 @@
+chip northbridge/intel/sandybridge
+ register "gfx.ndid" = "3"
+ register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }"
+
+ # Enable DisplayPort Hotplug with 6ms pulse
+ register "gpu_dp_d_hotplug" = "0x06"
+
+ # Enable Panel as LVDS and configure power delays
+ register "gpu_panel_port_select" = "0" # LVDS
+ register "gpu_panel_power_cycle_delay" = "6" # T7: 500ms
+ register "gpu_panel_power_up_delay" = "100" # T1+T2: 10ms
+ register "gpu_panel_power_down_delay" = "100" # T5+T6: 10ms
+ register "gpu_panel_power_backlight_on_delay" = "2100" # T3: 210ms
+ register "gpu_panel_power_backlight_off_delay" = "2100" # T4: 210ms
+ register "gfx.use_spread_spectrum_clock" = "1"
+ register "gfx.link_frequency_270_mhz" = "1"
+ register "gpu_cpu_backlight" = "0x1155"
+ register "gpu_pch_backlight" = "0x11551155"
+
+ device cpu_cluster 0x0 on
+ chip cpu/intel/socket_rPGA989
+ device lapic 0x0 on
+ end
+ end
+ chip cpu/intel/model_206ax # FIXME: check all registers
+ register "c1_acpower" = "1"
+ register "c1_battery" = "1"
+ register "c2_acpower" = "3"
+ register "c2_battery" = "3"
+ register "c3_acpower" = "5"
+ register "c3_battery" = "5"
+ device lapic 0xacac off
+ end
+ end
+ end
+
+ # Override fuse bits that hard-code the value to 666 Mhz
+ register "max_mem_clock_mhz" = "933"
+
+ device domain 0x0 on
+ chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
+ register "c2_latency" = "0x0065"
+ register "docking_supported" = "1"
+ register "gen1_dec" = "0x000c15e1"
+ register "gen2_dec" = "0x007c1601"
+ register "gen3_dec" = "0x000c06a1"
+ register "gpi13_routing" = "2"
+ register "gpi1_routing" = "2"
+ register "p_cnt_throttling_supported" = "1"
+ register "pcie_hotplug_map" = "{ 1, 0, 1, 0, 0, 0, 0, 0 }"
+ register "pcie_port_coalesce" = "1"
+ register "sata_interface_speed_support" = "0x3"
+ register "sata_port_map" = "0x17"
+ register "superspeed_capable_ports" = "0x0000000f"
+ register "xhci_overcurrent_mapping" = "0x04000201"
+ register "xhci_switchable_ports" = "0x0000000f"
+
+ # device specific SPI configuration
+ register "spi_uvscc" = "0x2005"
+ register "spi_lvscc" = "0x2005"
+
+ device pci 14.0 on # USB 3.0 Controller
+ subsystemid 0x17aa 0x21f3
+ end
+ device pci 16.0 on # Management Engine Interface 1
+ subsystemid 0x17aa 0x21f3
+ end
+ device pci 16.1 off # Management Engine Interface 2
+ end
+ device pci 16.2 off # Management Engine IDE-R
+ end
+ device pci 16.3 off # Management Engine KT
+ end
+ device pci 19.0 on # Intel Gigabit Ethernet
+ subsystemid 0x17aa 0x21f3
+ end
+ device pci 1a.0 on # USB2 EHCI #2
+ subsystemid 0x17aa 0x21f3
+ end
+ device pci 1b.0 on # High Definition Audio Audio controller
+ subsystemid 0x17aa 0x21f3
+ end
+ device pci 1c.0 on # PCIe Port #1
+ subsystemid 0x17aa 0x21f3
+ chip drivers/ricoh/rce822 # Ricoh cardreader
+ register "disable_mask" = "0x87"
+ register "sdwppol" = "1"
+ device pci 00.0 on # Ricoh SD card reader
+ subsystemid 0x17aa 0x21f3
+ end
+ end
+ end
+ device pci 1c.1 on # PCIe Port #2
+ subsystemid 0x17aa 0x21f3
+ end
+ device pci 1c.2 on # PCIe Port #3
+ subsystemid 0x17aa 0x21f3
+ end
+ device pci 1c.3 off # PCIe Port #4
+ end
+ device pci 1c.4 off # PCIe Port #5
+ end
+ device pci 1c.5 off # PCIe Port #6
+ end
+ device pci 1c.6 off # PCIe Port #7
+ end
+ device pci 1c.7 off # PCIe Port #8
+ end
+ device pci 1d.0 on # USB2 EHCI #1
+ subsystemid 0x17aa 0x21f3
+ end
+ device pci 1e.0 off # PCI bridge
+ end
+ device pci 1f.0 on # LPC bridge PCI-LPC bridge
+ subsystemid 0x17aa 0x21f3
+ chip ec/lenovo/pmh7
+ register "backlight_enable" = "0x01"
+ register "dock_event_enable" = "0x01"
+ device pnp ff.1 on # dummy
+ end
+ end
+ chip ec/lenovo/h8
+ device pnp ff.2 on # dummy
+ io 0x60 = 0x62
+ io 0x62 = 0x66
+ io 0x64 = 0x1600
+ io 0x66 = 0x1604
+ end
+ register "config0" = "0xa7"
+ register "config1" = "0x01"
+ register "config2" = "0xa0"
+ register "config3" = "0xe2"
+
+ register "has_keyboard_backlight" = "0"
+
+ register "beepmask0" = "0x02"
+ register "beepmask1" = "0x86"
+ register "has_power_management_beeps" = "1"
+ register "event2_enable" = "0xff"
+ register "event3_enable" = "0xff"
+ register "event4_enable" = "0xf0"
+ register "event5_enable" = "0x3c"
+ register "event6_enable" = "0x00"
+ register "event7_enable" = "0xa1"
+ register "event8_enable" = "0x7b"
+ register "event9_enable" = "0xff"
+ register "eventa_enable" = "0x00"
+ register "eventb_enable" = "0x00"
+ register "eventc_enable" = "0xff"
+ register "eventd_enable" = "0xff"
+ register "evente_enable" = "0x0d"
+ end
+ end
+ device pci 1f.2 on # SATA Controller 1
+ subsystemid 0x17aa 0x21f3
+ end
+ device pci 1f.3 on # SMBus
+ subsystemid 0x17aa 0x21f3
+ chip drivers/i2c/at24rf08c # eeprom, 8 virtual devices, same chip
+ device i2c 54 on
+ end
+ device i2c 55 on
+ end
+ device i2c 56 on
+ end
+ device i2c 57 on
+ end
+ device i2c 5c on
+ end
+ device i2c 5d on
+ end
+ device i2c 5e on
+ end
+ device i2c 5f on
+ end
+ end
+ end
+ device pci 1f.5 off # SATA Controller 2
+ end
+ device pci 1f.6 off # Thermal
+ end
+ end
+ device pci 00.0 on # Host bridge Host bridge
+ subsystemid 0x17aa 0x21f3
+ end
+ device pci 01.0 on # PCIe Bridge for discrete graphics
+ end
+ device pci 02.0 on # Internal graphics VGA controller
+ subsystemid 0x17aa 0x21f3
+ end
+ device pci 04.0 off # Signal processing controller
+ end
+ end
+end